����������

����������

www.irf.com 1

�������

� Lead-Free

����������

2 www.irf.com

����������

www.irf.com 3

����������

4 www.irf.com

����������

www.irf.com 5

����������

6 www.irf.com

����������

www.irf.com 7

����������

8 www.irf.com

���������� ���������������������������������� ���������������

LEAD ASSIGNMENTS

NOTES:

- D -5.30 (.209)4.70 (.185)

2.50 (.089)1.50 (.059)

4

3X0.80 (.031)0.40 (.016)

2.60 (.102)2.20 (.087)3.40 (.133)

3.00 (.118)

3X

0.25 (.010) M C A S

4.30 (.170)3.70 (.145)

- C -

2X5.50 (.217)4.50 (.177)

5.50 (.217)

0.25 (.010)

1.40 (.056)1.00 (.039)

3.65 (.143)3.55 (.140)

DM MB- A -

15.90 (.626)15.30 (.602)

- B -

1 2 3

20.30 (.800)19.70 (.775)

14.80 (.583)14.20 (.559)

2.40 (.094)2.00 (.079)

2X

2X

5.45 (.215)

1 DIMENSIONING & TOLERANCING PER ANSI Y14.5M, 1982.2 CONTROLLING DIMENSION : INCH.3 CONFORMS TO JEDEC OUTLINE TO-247-AC.

1 - GATE2 - DRAIN3 - SOURCE4 - DRAIN

LEAD ASSIGNMENTSHexfet1 - Gate2 - Drain3 - Source4 - Drain

IGBT1 - Gate2 - Collector3 - Emitter4 - Collector

�������������� ��������������

EXAMPLE:

ASSEMBLED ON WW 35, 2000LOT CODE 5657WITH ASSEMBLY THIS IS AN IRFPE30

IN THE ASSEMBLY LINE "H" 035HLOGO

INTERNATIONALRECTIFIER IRFPE30

LOT CODEASSEMBLY

56 57

PART NUMBER

DATE CODEYEAR 0 = 2000

WEEK 35LINE H

Note: "P" in assembly lineposition indicates "Lead-Free"

Data and specifications subject to change without notice.

IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105TAC Fax: (310) 252-7903

Visit us at www.irf.com for sales contact information.02/04

Note: For the most current drawings please refer to the IR website at: http://www.irf.com/package/

IMPORTANT NOTICEThe information given in this document shall in no event be regarded as a guarantee of conditions or characteristics (“Beschaffenheitsgarantie”) .

With respect to any examples, hints or any typical values stated herein and/or any information regarding the application of the product, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party.

In addition, any information given in this document is subject to customer’s compliance with its obligations stated in this document and any applicable legal requirements, norms and standards concerning customer’s products and any use of the product of Infineon Technologies in customer’s applications.

The data contained in this document is exclusively intended for technically trained staff. It is the responsibility of customer’s technical departments to evaluate the suitability of the product for the intended application and the completeness of the product information given in this document with respect to such application.

For further information on the product, technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies office (www.infineon.com).

WARNINGSDue to technical requirements products may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies office.

Except as otherwise explicitly approved by Infineon Technologies in a written document signed by authorized representatives of Infineon Technologies, Infineon Technologies’ products may not be used in any applications where a failure of the product or any consequences of the use thereof can reasonably be expected to result in personal injury.