PROPOSAL - Knitting Industry

PROPOSAL FOR TENDER BY PRIVATE SALE

OF USED TEXTILE MACHINERY

Ramsay McDonald Group 22 Concorde Drive, Keilor Park 342, Victoria, Australia Phone: +61 3 9336 6000 Facsimile: +61 3 9336 6002

www.ramsaymcdonald.com.au

2

Table of Contents

Item Page/s

1. Cover advice of Sale ............................................................................................................... 3

2. Conditions of Offer ................................................................................................................. 4

3. Dismantle and movement services (Ramsay Engineering Services) ..................................... 5

4. Private Sale Offer Response Form ......................................................................................... 6

5. Terms and Conditions of Sale .......................................................................................... 7 – 8

6. Equipment Index .................................................................................................................... 9



3

For Private Sale

MAJOR TEXTILE PLANT Used Textile Machinery.

Located in Botany, New South Wales, Australia.

For all enquiries and information please contact

Mr. Steve Mileto Mr. Daniel Kosinski Phone: Mobile/Cell: Email:

+61 3 9336 6000 +61 (0) 425 737 936 [email protected]

Phone: Direct: Email:

+61 3 9336 6000 +61 3 9336 6011 [email protected]



4

Final Offers close 5th November 2013 at 4:00pm Australian Eastern

Standard Time (AEST) or Australian Daylight Savings time (ADST) and

will be accepted at any time up until this date and time and are to be

made via the attached Private Sale Response Form.

All successful formal bids will be notified in writing by close of business

on 11th November 2013 at 4:00pm AEST (or ADST).

● The Plant & Equipment identified in this catalogue is being offered for Private Sale via Tender Process

● Offers for individual or multiple lots will be accepted

● Offers are to be made GST Exclusive

● A ten percent (10%) exclusive buyer’s premium applies to each piece of equipment purchased.

● A twenty percent (20%) Non-Refundable deposit is required with forty eight (48) hours of written acceptance of offer

● Balance of funds will be required within Fourteen (14) days of acceptance of offer

● Viewing of the equipment is by appointment only and will be arranged with Mr. Steve Mileto

● Pick up and removal of equipment is at the buyers expense and is to be organized by the buyer using qualified and insured service providers of their choice or in conjunction with Ramsay Engineering Services

● All machinery inspections and removals will be subject to OHS legislature as effective in the state of New South Wales and as subject to the company policy of STANDARDKNIT FABRICS

● Domestic buyers are to have the purchased equipment moved. Movement date will vary based on items purchased and will be advised by Ramsay McDonald

● International buyers are to have the purchased equipment moved. Movement date will vary based on items purchased and will be advised by Ramsay McDonald

● Removal of the equipment will be conducted on an approved date to be arranged in conjunction with Ramsay McDonald and STANDARDKNIT FABRICS



5

Ramsay Engineering Services

Technical dismantle, pack and FOB relocation engineering services are also available to prospective

buyers via Ramsay Engineering Services (RES) a wholly owned subsidiary of the Ramsay McDonald

Group.

Specialty engineering staff, mechanics and riggers are provided to disconnect, dismantle, and pack

into container/s for national or international transport via the buyers’ nominated mode for road, sea

or air transit.

RES provides full public liability/professional indemnity up to a maximum of ten million Australian

dollars and certification of compliance with the Australian work place authorities including

Occupational Health & Safety (OHS) and Industrial Relations (IR) as is required on the StandardKnit

Fabrics site.

Quotations will be provided upon request from the buyer for RES to dismantle, pack and ship any

equipment purchased. Where possible a firm/fixed price will be provided for equipment successfully

purchased.

RES can also assist in sourcing technicians directly from the designated machinery suppliers for re-

commissioning of the purchased plant and equipment.

Other Engineering Services

The buyer also has the right to appoint or utilize their own or preferred engineering services

provided they comply with all Occupational Health and Safety and Health Safety and Environment

and Industrial Relations legislature as is applicable in the State of New South Wales and under

Australian Federal Law.



6

PRIVATE SALE RESPONSE FORM Unconditional and Irrevocable Offer to Purchase

As made to: Ramsay McDonald Group 22 Concorde Drive, Keilor Park 3042, Victoria, Australia A.B.N. 89 004 544 227

I, PLEASE PRINT NAME

As an authorized agent/representative of

COMPANY NAME

A.C.N. A.B.N.

OF: ADDRESS

STATE POST CODE

Do offer the amount (Exclusive of GST) as shown below for the purchase of Assets as listed in the catalogue. I understand and accept a buyer’s premium of (10%) will apply to the Lots nominated:

LOT NUMBER AUD$

LOT NUMBER AUD$

LOT NUMBER AUD$

LOT NUMBER AUD$

LOT NUMBER AUD$

LOT NUMBER AUD$

LOT NUMBER AUD$

LOT NUMBER AUD$

LOT NUMER AUD$

LOT NUMBER AUD$

In submitting this offer/these offers, I/We acknowledge having read and fully understood the Terms and Conditions of sale as provided.

SIGNED

As witnessed by:

WITNESS: PLEASE PRINT NAME

SIGNED



7

Terms and Conditions of Sale

1. I/We understand that I/We will be required to have equipment paid for in full by the end of business trading

Monday 25th

November 2013.

2. I/We understand a twenty percent (20%) non-refundable deposit is payable within forty eight (48) hours of

acceptance of our offer.

3. I/We understand the equipment must be moved from the site of purchase by:

National buyers – 15th

February 2014 or as negotiated with Ramsay McDonald Group and StandardKnit

Fabrics.

International buyers – 15th

February 2014 or as negotiated with Ramsay McDonald Group and

StandardKnit Fabrics.

4. The items are being offered for sale on a GST exclusive basis. A buyer’s premium of ten percent (10%) applies to

successful offers and will be added to the successful GST exclusive offer price.

5. I/We acknowledge that should I/We fail to comply with the Terms of sale any money paid, partly paid or

deposited shall be forfeited. Any item not removed within the time prescribed ma at the option of Ramsay

McDonald Group or the Vendor’s option be either stored at the defaulting purchasers risk and expense or resold.

In which case, the defaulting purchaser shall make any deficiency whatsoever good without prejudice to any

rights or remedies of the Vendor or of Ramsay McDonald Group.

6. I/We further understand that all items of plant and equipment are offered on an “as is where is” basis. Buyers

are warned to inspect all lots before submitting any offer. No warranty whatsoever is given with any item of

equipment and the Vendor and Ramsay McDonald Group shall not be responsible for incorrect description or for

the correctness of any statement concerning any item in the catalogue or otherwise, for any fault, defect or

damage to any item. Each of the items offered for sale will be taken with all faults and will be at the buyers risk

on the submission of an offer to purchase. The purchaser on lodging an offer expressly agrees that they have

inspected the items bid for and in making this offer relied entirely on its own judgment and not on any

statements or representations of or made by Ramsay McDonald Group or the Vendor.

7. The Occupational Health and Safety Act 2011 (and as amended) and Regulations impose obligations in respect of

safety for workers arising out of the DESIGN, MANUFACTURE AND SUPPLY of plant for use in a workplace.

8. Ramsay McDonald Group and the Vendor warn all buyers THAT ALL PLANT OR EQUIPMENT OFFERED FOR SALE

by Tender MAY NOT BE FIT FOR USE IN A WORKPLACE and it is the BUYER’S REPSPONSIBILITY to ensure that it is

brought to a standard necessary to comply with the Occupational Health and Safety Act 2011 (and as amended)

and is safe and fit for use in a workplace. Breaches of the Occupational Health and Safety Act 2011 (and as

amended) carry onerous penalties for people who PURCHASE and OPERATE UNSAFE EQUIPMENT without

conducting a thorough safety inspection.

9. Subject to conditions and warranties prescribed by statute which cannot be excluded Ramsay McDonald Group

and the Vendor shall not be liable for any loss, damage or injury of any kind whatsoever, whether arising from

the performance, description, mis-description or identification of any Goods, the entry of persons onto premises

or otherwise (including without limitation, loss, damage or injury caused by the default or negligence of or mis-

description by Ramsay McDonald Group or the Vendor and any incidental or consequential loss, damage or

injury) to any person or property.

10. Title to an item shall remain with the Vendor until the full purchase price and all other sums payable in respect of

the item(s) are paid in full.



8

11. An item shall be held at all times after purchase at the purchasers risk and expense in respect of loss or damage

from any cause whatsoever including Ramsay McDonald Group or the Vendor’s or any other persons’ negligence

and taxes and charges of any kind.

12. The purchaser shall remove purchased items with reasonable professional skill, care and attention and shall bear

the cost of making good any damage or injury caused as a result of removing any purchased item.

13. A provision of or a right created under these terms and conditions may not be waived expect in writing signed by

the party granting the waiver.

14. I/We totally indemnify Ramsay McDonald Group and STANDARDKNIT FABRICS, Directors, Officers and Employees

from any actions arising from the purchase of any item whether consequential or otherwise.

15. I/We understand the highest offer may not be accepted.



9

EQUIPMENT INDEX

Page/s

Knitting ....................................................................................................................................... 10 - 47

Dyeing ....................................................................................................................................... 47 – 55

Finishing .................................................................................................................................... 55 – 62

Laboratory ................................................................................................................................. 62 – 70

Forklift & lifting equipment ...................................................................................................... 70 – 75

Compressors / Drying Equipment / Boilers................................................................................ 75 - 78

Full brochure visible via our website


http://www.ramsaymcdonald.com.au/

Ramsay McDonald Group 22 Concorde Drive, Keilor Park 3042, Victoria, Australia

Phone: +61 3 9336 6000 Facsimile: +61 3 9336 6002 Email: [email protected] / [email protected] Web: www.ramsaymcdonald.com.au 10 | P a g e

DIV. LOT Y.O.M. MAKE / MODEL ITEM – DESCRIPTION / TECHNICAL SPECIFICATIONS IMAGE

K 1 1991 FUKAHARA Circular Knitting Machine Jersey / Lycra units / Uniwave Cylinder: 60” Gauge: 28 Feeders: 180 Creel: Side Model Number: JXC-3S Serial Number: 9137740

3342

K 2 1991 FUKAHARA Circular Knitting Machine Jersey / Lycra Units / Uniwave Cylinder: 60” Gauge : 26 Feeders: 180 Creel: Side Model Number: JXC-3S Serial Number: 9137821

3347

K 3 1991 FUKAHARA Circular Knitting Machine Jersey / Lycra Units / Uniwave Cylinder: 60” Gauge: 26 Feeders: 180 Creel: Side Model Number: JXC-3S Serial Number: 9138080

3343


3348




K 5 1991 FUKAHARA Circular Knitting Machine Jersey / Lycra Units / Uniwave Cylinder: 60” Gauge: 26 Feeders: 180 Creel: Side Model Number: JXC – 3S Serial Number: 9138214

3344


3349


3345


3350





3346


3351

K 11 1999 MAYER Circular Knitting Machine Lycra Units / Spare 28gg Cylinder Relaint 3.2 Jersey Cylinder: 30” Gauge: 32 Feeders: 96 Creed: Side Converted to Open Width Serial Number: 48127

3437

K 12 1999 MAYER Circular Knitting Machine Lycra Units / Spare 32gg Cylinder Relaint 3.2 Jersey Cylinder: 30” Gauge: 28 Feeders: 96 Creed: Side Converted to Open Width Serial Number: 48130

3438




K 13 2000 TERROT Circular Knitting Machine Jersey / Lycra Units / Cams for lacing / IRO Units Electronic Jacquard Cylinder: 34” Gauge: 28 Feeders: 84 Creel: Side Model: SCC 572 Serial Number: 23260

3440

K 14 2000 TERROT Circular Knitting Machine Jersey / Lycra Units / Cams for lacing / IRO Units Electronic Jacquard Cylinder: 34” Gauge: 28 Feeders: 84 Creel: Side Model: SCC 572 Serial Number: 26229

3443

K 15 1988 FUKAHARA Circular Knitting Machine Jersey / Open width Lycra units Cylinder: 30” Gauge: 28 Feeders: 90 Creel: Side Model Number: OD2-VXC-3S Serial Number: 0618865

3442

K 16 1988 FUKAHARA Circular Knitting Machine Jersey / Open width Lycra units Cylinder: 30” Gauge: 28 Feeders: 90 Creel: Side Model Number: OD2-VXC-3S Serial Number: 0618864

3441




K 17 1990 FUKAHARA Circular Knitting Machine Jersey / Open width with conversion Lycra units Cylinder: 30” Gauge: 28 Feeders: 90 Creel: Side Model Number: FXC-3S Serial Number: 9137859

3444

K 18 1990 FUKAHARA Circular Knitting Machine Jersey / Open width with conversion Lycra units Cylinder: 30” Gauge: 28 Feeders: 90 Creel: Side Model Number: FXC-3S Serial Number: 9030697

3439

K 19 1995 FUKAHARA Circular Knitting Machine Jersey / Mini Jacquard Lycra units High Frame Cylinder: 30” Gauge: 20 Feeders: 72 Creel: Side Model Number: FX_JS3 Serial Number: 9540725

3362

K 20 1995 FUKAHARA Circular Knitting Machine Jersey / Mini Jacquard Lycra units High Frame Cylinder: 30” Gauge: 20 Feeders: 72 Creel: Side Model Number: FX_JS3 Serial Number: 9540727

3399




K 21 1995 FUKAHARA Circular Knitting Machine Jersey / Mini Jacquard High Frame Cylinder: 26” Gauge: 20 Feeders: 72 Creel: Side Model Number: FX_JS3 Serial Number: 9540728

3363

K 22 1995 FUKAHARA Circular Knitting Machine Jersey / Mini Jacquard High Frame Cylinder: 26” Gauge: 28 Feeders: 60 Creel: Side Model Number: FX_JS3 Serial Number: 9540726

3364

K 23 1987 FUKAHARA Circular Knitting Machine Jersey Cylinder: 30” Gauge: 28 Feeders: 90 Creel: Side Model Number: FXC-3S Serial Number: 8734005

3361

K 24 1991 FUKAHARA Circular Knitting Machine Jersey Cylinder: 30” Gauge: 28 Feeders: 90 Creel: Side Model Number: FXC-3S Serial Number: 9137794

3374




K 25 1992 FUKAHARA Circular Knitting Machine Jersey Cylinder: 30” Gauge: 28 Feeders: 90 Creel: Side Model Number: FXC – 3S Serial Number: 9238298

3386


3376

K 27 1991 FUKAHARA Circular Knitting Machine Jersey / Lycra units Cylinder: 30” Gauge: 28 Feeders: 90 Creel: Side Model Number: FXC – 3S Serial Number: 9138304

3398

K 28 1991 FUKAHARA Circular Knitting Machine Jersey / Lycra units Cylinder: 30” Gauge: 28 Feeders: 90 Creel: Side Model Number: FXC – 3S Serial Number: 913803

3433





3373


3388


3410


3434




K 33 1984 FUKAHARA Circular Knitting Machine Jersey Cylinder: 30” Gauge: 28 Feeders: 90 Creel: Side Model Number: XL – 3FA Serial Number: 8431227

3423

K 34 1996 FUKAHARA Circular Knitting Machine Jersey High Frame Cylinder: 30” Gauge: 14 Creel: Side Model Number: VXC – 2FAC Serial Number: 9641324

3375

K 35 1984 FUKAHARA Circular Knitting Machine Jersey Cylinder: 30” Gauge: 28 Creel: Side Model Number: XL – 4S Serial Number: 8431610

3387

K 36 1986 FUKAHARA Circular Knitting Machine Jersey Cylinder: 30” Gauge: 28 Creel: Side Model Number: XL – 4S Serial Number: 8633620

3411




K 37 1986 FUKAHARA Circular Knitting Machine Jersey Cylinder: 30” Gauge: 28 Feeders: 120 Creel: Side Model Number: XL – 4S Serial Number: 8633563

3436

K 38 1987 FUKAHARA Circular Knitting Machine Jersey Cylinder: 30” Gauge: 28 Feeders: 90 Creel: Side Model Number: XL – 3S Serial Number: 8733906

3435

K 39 1985 FUKAHARA Circular Knitting Machine Jersey Cylinder: 30” Gauge: 28 Feeders: 120 Creel: Side Model Number: FX – 4SW Serial Number: 8532265

3422

K 40 1996 FUKAHARA Circular Knitting Machine Jersey High Frame Cylinder: 36” Gauge: 28 Feeders: 108 Creel: Side Model Number: VXC – 23SS Serial Number: 9641187

3385




K 41 1999 FUKAHARA Circular Knitting Machine Jersey / Lycra units High Frame Cylinder: 36” Gauge: 28 Feeders: 108 Creel: Side Model Number: VXC – 23SS Serial Number: 9943140

3396


3408


3409


3420





3421


3474


3397

K 48 1990 FUKAHARA Circular Knitting Machine Fleecy High Frame Cylinder: 30” Gauge: 20 Feeders: 90 Creel: Side Model Number: FXC – Z/DF Serial Number: 9036970

3354





3365


3355


3356


3360





3372


3481


3482


3483





3372


3487

K 59 1989 FUKAHARA Circular Knitting Machine Jersey Cylinder: 33” Gauge: 20 Feeders: 108 Creel: Side Model Number: FXCY – 2/4S Serial Number: 8936050

3456

K 60 1980 FUKAHARA Circular Knitting Machine Terry Cylinder: 26” Gauge: 20 Feeders: 52 Creel: Side Model Number: XL – FLD Serial Number: 8027272

3459




K 61 1980 FUKAHARA Circular Knitting Machine Terry Cylinder: 26” Gauge: 20 Feeders: 52 Model Number: XL – FLD Serial Number: 8027565

3479

K 62 1976 FUKAHARA Circular Knitting Machine Terry Cylinder: 26” Gauge: 20 Feeders: 52 Model Number: XL – WS Serial Number: 7624398

3471

K 63 1977 FUKAHARA Circular Knitting Machine Jersey Cylinder: 30” Gauge: 10 Feeders: 90 Model Number: XL – 3P Serial Number: 7724624

3470

K 64 1986 FUKAHARA Circular Knitting Machine Fleecy Cylinder: 30” Gauge: 18 Feeders: 90 Model Number: RX – DF3 Serial Number: 8633480

3480




K 65 1977 FUKAHARA Circular Knitting Machine Fleecy Cylinder: 30” Gauge: 18 Feeders: 90 Model Number: XL – LS2 Serial Number: Unknown

3485

K 66 1982 FUKAHARA Circular Knitting Machine Fleecy Cylinder: 30” Gauge: 18 Feeders: 90 Model Number: XL – LS2 Serial Number: 8229628

3484

K 67 1985 FUKAHARA Circular Knitting Machine Jersey Cylinder: 30” Gauge: 20 Feeders: 48 Creel: Side Electronic striper Model Number: RX – SD/Y Serial Number: 8532322

3462

K 68 1989 FUKAHARA Circular Knitting Machine Jersey Electronic stripper Cylinder: 26” Gauge: 20 Feeders: 42 Creel: Side Model Number: FX - SD/Y Serial Number: 8935941

3466




K 69 1991 FUKAHARA Circular Knitting Machine Jersey Cylinder: 30” Gauge: 20 Feeders: 90 Creel: Side Model Number: FXC – 2 / DF Serial Number: 9138015

3472

K 70 1982 FUKAHARA Circular Knitting Machine Jersey / Lycra units Cylinder: 30” Gauge: 14 Feeders: 90 Creel: Side Model Number: unknown Serial Number: unknown

3473

K 71 1980 FUKAHARA Circular Knitting Machine Jersey / Mini Jacquard Cylinder: 26” Gauge: 28 Feeders: 60 Model Number: XL – JS2 Serial Number: 8027425

3358

K 72 1995 FUKAHARA Circular Knitting Machine Rib / Lycra units High Frame Cylinder: 38” Gauge: 20 Feeders: 84 Model Number: V – 7E00 Serial Number: 0950423

3352




K 73 1995 FUKAHARA Circular Knitting Machine Rib / Lycra units High Frame Cylinder: 38” Gauge: 20 Feeders: 84 Model Number: V – 7E00 Serial Number: 0950422

3353

K 74 1994 FUKAHARA Circular Knitting Machine Rib / Lycra units Cylinder: 30” Gauge: 14 Feeders: 60 Model Number: F – LDR Serial Number: 0649424

3357

K 75 1987 FUKAHARA Circular Knitting Machine Rib / Lycra units Cylinder: 30” Gauge: 14 Feeders: 60 Model Number: FDR Serial Number: 0548724

3359

K 76 1985 FUKAHARA Circular Knitting Machine Rib / Lycra units High Frame Cylinder: 33” Gauge: 10 Feeders: 36 Creel: Side Model Number: FLDR / CQ Serial Number: 0850133

3366




K 77 1985 FUKAHARA Circular Knitting Machine Rib High Frame Cylinder: 33” Gauge: 10 Feeders: 36 Model Number: FLDR / CQ Serial Number: 0850132

3478

K 78 1998 FUKAHARA Circular Knitting Machine Rib / Lycra units High Frame Cylinder: 30” Gauge: 14 Feeders: 54 Creel: Side Model Number: V-71R Serial Number: 1051208

3368

K 79 1998 FUKAHARA Circular Knitting Machine Rib / Lycra units High Frame Cylinder: 30” Gauge: 14 Feeders: 60 Creel: Side Model Number: V – 71R Serial Number: 1051209

3369

K 80 1976 FUKAHARA Circular Knitting Machine Rib Cylinder: 30” Gauge: 14 Feeders: 60 Creel: Side Model Number: LDR Serial Number: 6045376

3370




K 81 1986 FUKAHARA Circular Knitting Machine Rib Cylinder: 30” Gauge: 20 Feeders: 84 Creel: Side Model Number: LIL – 8A Serial Number: 6145556

3371

K 82 1985 FUKAHARA Circular Knitting Machine Rib Cylinder: 30” Gauge: 18 Feeders: 84 Creel: Side Model Number: LIL – 8A Serial Number: 6145443

3377

K 83 1982- 1986

FUKAHARA Circular Knitting Machine Rib Cylinder: 30” Gauge: 20 Feeders: 76 Creel: Side Model Number: unknown Serial Number: unknown

3378

K 84 1992 FUKAHARA Circular Knitting Machine Rib Mini Jacquard Cylinder: 30” Gauge: 18 Feeders: 84 Creel: Side Model Number: LUX - MD Serial Number: 6045292

3379




K 85 1994 FUKAHARA Circular Knitting Machine Rib / Lycra units Mini Jacquard Cylinder: 30” Gauge: 18 Feeders: 84 Creel: Side Model Number: LUX - MD Serial Number: 5945198

3380

K 86 1985 FUKAHARA Circular Knitting Machine Rib / Lycra units Mini Jacquard Cylinder: 30” Gauge: 18 Feeders: 72 Creel: Side Model Number: V – LP13B Serial Number: 0850203

3381

K 87 1985 FUKAHARA Circular Knitting Machine Rib Mini Jacquard Cylinder: 30” Gauge: 24 Feeders: 72 Creel: Side Model Number: V – LP13B Serial Number: 0950754

3405

K 88 1985 FUKAHARA Circular Knitting Machine Rib Cylinder: 30” Gauge: 10 Feeders: 36 Creel: Side Model Number: LDR – C Serial Number: 5945216

3383




K 89 1994 FUKAHARA Circular Knitting Machine Electronic Rib Cylinder: 30” Gauge: 18 Feeders: 48 Creel: Side Model Number: F – LEC 72 Serial Number: 0649207

3384

K 90 1989 MAYER Circular Knitting Machine Rib Cylinder: 30” Gauge: 14 Feeders: 48 Creel: Side Model Number: 1 NOVI III Serial Number 30547

3367

K 91 1993 TERROT Circular Knitting Machine Rib Cylinder: 30” Gauge: 18 Feeders: 72 Creel: Side Model Number: UP 372 Serial Number: 007715380

3382

K 92 1995 FUKAHARA Circular Knitting Machine Interlock High Frame Cylinder: 30” Gauge: 24 Feeders: 108 Creel: Side Model Number: FIM – 108 AHQ Serial Number: 0749794

3393





3392

K 94 1995 FUKUHARA Circular Knitting Machine Interlock High Frame Cylinder: 30” Gauge: 24 Feeders: 108 Creel: Side Model Number: FIM – 108 AHQ Serial Number: 0749793

3390


3389


3391





3394

K 98 1982 BENTLEY Circular Knitting Machine Rib Mini Jacquard Cylinder: 30” Gauge: 18 Feeders: 36 Creel: Side Model Number: 9 / RJ / 36 Serial Number: RP17385

3463

K 99 1982 BENTLEY Circular Knitting Machine Rib Mini Jacquard Cylinder: 30” Gauge: 22 Feeders: 36 Creel: Side Model Number: 9 / RJ / 36 Serial Number: RP16463

3464

K 100 1985 FUKAHARA Circular Knitting Machine Rib Cylinder: 30” Gauge: 24 Feeders: 84 Creel: Side Model Number: FIL – 8AE Serial Number: 1051285

3457





3458


3460


3475


3476




K 105 1994 FUKAHARA Circular Knitting Machine Rib High Frame Cylinder: 30” Gauge: 20 Feeders: 84 Creel: Side Model Number: FIL – 8AE Serial Number: 0649000

3400

K 106 1993 FUKAHARA Circular Knitting Machine Rib High Frame Cylinder: 30” Gauge: 24 Feeders: 84 Creel: Side Machine Number: FIL – 8AE Serial Number: 0548728

3401


3402


3403




K 109 1994 FUKAHARA Circular Knitting Machine Rib / Lycra units High Frame Cylinder: 30” Gauge: 28 Feeders: 84 Creel: Side Model Number: FIL – 8AE Serial Number: 0648881

3424


3428


3430


3431





3432

K 114 1992 FUKAHARA Circular Knitting Machine Rib / Lycra units High Frame Cylinder: 30” Gauge: 24 Feeders: 84 Creel: Side Model Number: V – 8ME42 Serial Number: 849927

3412

K 115 1992 FUKAHARA Circular Knitting Machine Rib High Frame Cylinder: 30” Gauge: 24 Feeders: 84 Creel: Side Model Number: V – 8ME 42 Serial Number: 0849926

3413

K 116 1992 FUKAHARA Circular Knitting Machine Rib / Lycra units High Frame Cylinder: 30” Gauge: 24 Feeders: 84 Creel: Side Model Number: V – 8ME 42 Serial Number: 0849924

3414




K 117 1992 FUKAHARA Circular Knitting Machine Rib / Lycra units High Frame Cylinder: 30” Gauge: 24 Feeders: 84 Creel: Side Model Number: V – 8ME 42 Serial Number: 0849925

3415

K 118 1993 FUKAHARA Circular Knitting Machine Rib Cylinder: 30” Gauge: 24 Feeders: 84 Creel: Side Model Number: V – 8ME 22 Serial Number: 1252146

3461

K 119 1993 FUKAHARA Circular Knitting Machine Rib Cylinder: 30” Gauge: 24 Feeders: 84 Creel: Side Model Number: V – 8ME 11 Serial Number: 1252147

3465

K 120 1993 FUKAHARA Circular Knitting Machine Rib / Lycra units Mini Jacquard Cylinder: 30” Gauge: 20 Feeders: 72 Creel: Side Model Number: F – LPJ / 3A Serial Number: 0649312

3425




K 121 1993 FUKAHARA Circular Knitting Machine Rib / Lycra units Mini Jacquard Cylinder: 30” Gauge: 20 Feeders: 72 Creel: Side Model Number: F – LPJ / 3A Serial Number: 0649313

3429

K 122 1993 FUKAHARA Circular Knitting Machine Rib Mini Jacquard Cylinder: 30” Gauge: 20 Feeders: 72 Creel: Side Model Number: F –LPJ / 3A Serial Number: 0649311

3427

K 123 1993 FUKAHARA Circular Knitting Machine Rib Mini Jacquard Cylinder: 30” Gauge: 20 Feeders: 72 Creel: Side Model Number: F – LPJ / 3A Serial Number: 0649314

3426

K 124 1987 FUKAHARA Circular Knitting Machine Interlock Cylinder: 30” Gauge: 24 Feeders: 108 Creel: Side Model Number: LIM – 108A Serial Number: 6245978

3395





3417


3418

K 127 1986- 1987

FUKAHARA Circular Knitting Machine Interlock Cylinder: 30” Gauge: 28 Feeders: 84 Creel: Side Model Number: LIM – 108A Serial Number: unknown

3419


3467




K 129 1986- 1987

MAYER Circular Knitting Machine Rib Cylinder: 34” Gauge: 15 Feeders: 72 Creel: Side Model Number: FV 2.0 Serial Number: 39001

3468

K 130 1987 FUKAHARA Circular Knitting Machine Electronic Rib Cylinder: 30” Gauge: 20 Feeders: 72 Creel: Side Model Number: N / LEC / 7 Serial Number: 6246013

3469

K 131 1986- 1987

FUKAHARA Circular Knitting Machine Rib Cylinder: 30” Gauge: 24 Feeders: 84 Creel: Side Model Number: LIL – 8A Serial Number: 6446585

3404

K 132 1986-1987

TERROT Circular Knitting Machine Rib Cylinder: 30” Gauge: 24 Feeders: 84 Creel: Side Model Number: 13P 184 Serial Number: 18105110

3406




K 133 1986- 1987

TERROT Circular Knitting Machine Rib Mini Jacquard Cylinder: 30” Gauge: 24 Feeders: 72 Creel: Side Model Number: UP 472 Serial Number: 26774

3407

K 134 1962 UNIVERSAL Flat Bed Knitting Machine Gauge: 12 Feeders: 1 Creel: Table Top Take Down: Mechanical Serial Number: 35574

Recommended for Scrap No Image

K 135 1998 MOTOCONO Winding Machine 9 heads – 2 out of service Package - 5°57 / 6” Feeders: 1 per end / cone Creel: Base cone to cone Inverter single motor / spindle drive Model Number: R9 – 664 / 9 Serial Number: unknown

3521

K 136 1990 HEMAC Inspection Table Serial Number: W10 3504




K 137 Made internally Inspection Table



K 140 Unknown BORAS Switzerland

Calator Model Number: AS1201




K 141 Made internally Assorted trolleys – approximately 100

K 142 1987 SHIMA SEIKI Flat Bed Knitting Machine Collar Machine Gauge: 12 Feeders: 2 Model Number: SFF 152T

Serial Number: 3033

3520

3519

K 143 1995 SHIMA SEIKI Flat Bed Knitting Machine Bed Width: 230cm (2300mm) Gauge: 12 Feeders: 4 Creel: Table Top Take Down: Electronic Model Number: SES 234 SS

Serial Number: 8473

3512

3511

K 144 1995 SHIMA SEIKI Flat Bed Knitting Machine Bed Width: 230cm (2300mm) Gauge: 12 Feeders: 4 Creel: Table Top Take Down: Electronic Model Number: SES 234 SS

Serial Number: 6042

3514

3513




K 145 1997 UNIVERSAL Flat Bed Knitting Machine Bed Width: 230cm (2300mm) Gauge: 12 Feeders: 2 Creel: Table Top Take Down: Electronic Model Number: MC122 Semi Electronic

Serial Number: 8006

K 146 1997 UNIVERSAL Flat Bed Knitting Machine Bed Width: 230cm (2300mm) Gauge: 12 Feeders: 2 Creel: Table Top Take Down: Electronic Model Number: 122 Semi Electronic

Serial Number: 8005

K 147 2000 SOHLER Overhead travelling cleaners. 9 units including electrical controls / dust collection centres

K 148 Various Fukahara Mayer Terrot

Conversion kits - Spare knitting cylinders / 106 units / various gauges / mostly new 3489

3491




D 149 1990

THIES ECO SOFT

Pressure Jet Fabric Dyeing Machine – Jet No. 9 6 Tubes 1,800kgs fabric capacity Dossing tank AREL ATC 304 controller

215

D 150 1990 THIES ECO SOFT

Pressure Jet Fabric Dyeing Machine – Jet No. 8 2 Tubes 600kgs fabric capacity Dossing tank AREL ATC 304 controller

220

D 151 THIES MINI SOFT 60

Pressure Jet Fabric Dyeing Machine – Jet No. 7 1 Tube 60kgs fabric capacity Dossing tank AREL ATC 304 controller

223

D 152 1988 THIES ROTO STREAM


226




D 153 1988

THIES ROTO STREAM


230



236

D 155 2001 AK AK SL 500

Pressure Jet Fabric Dyeing Machine –Jet No. 24 2 Tubes / 4 Ropes 500kgs fabric capacity Dossing tank AREL ATC 304 controller

239

D 156 2000 AK AK SL 75

Pressure Jet Fabric Dyeing Machine – Jet No. 23 1 Tube / 2 Ropes 150kgs fabric capacity Dossing tank AREL ATC 304 controller

244




D 157 2006 FONGS ECO 8 D2T

Pressure Jet Fabric Dyeing Machine – Jet No. 22 2 Tubes / 4 Ropes 400kgs fabric capacity Dossing tank AREL APC 504 controller Auxiliary Pre heat water tank

245

D 158 1996 THEIS MINI SOFT 60

Pressure Jet Fabric Dyeing Machine – Jet No. 1 1 Tube / 1 Rope 60kgs fabric capacity Dossing tank AREL ATC 3044 controller

247



248



251






254


Pressure Jet Fabric Dyeing Machine – Jet No. 4 1 Tube / 2 Ropes 200kgs fabric capacity Dossing tank AREL APC 504 controller Auxiliary Pre heat water tank

257


Pressure Jet Fabric Dyeing Machine – Jet No. 3 1 Tube / 2 Ropes 200kgs fabric capacity AREL APC 504 controller Auxiliary Pre heat water tank

258



260






263

D 166 2006 FONGS ALLFIT 60


266



267



270






272


Pressure Jet Fabric Dyeing Machine – Jet No. 18 3 Tubes / 6 Ropes 600kgs fabric capacity Dossing tank AREL APC 504 Controller Auxiliary Pre heat water tank

Add photos 22

D 171 Various VARIOUS Spare parts for Fongs Dyeing machines. Suitable to all Fongs Lots Lot 158 Lots 161 – 164 Lots 167 – 171

200 Winch reels with anti slip silicon strips 1 main pump with mechanical seals 1 feed pump with mechanical seals 3 Inner jet silicon seals and o-rings 6 Windows and heat exchanger silicon seals 20 assorted control push switches, indicator lamps and holders 6 solenoid valves to suit Fongs pneumatic manifold

016

D 172 Various VARIOUS Spare parts for Fongs Dyeing machines.

037

038




D 173 1999 AREL Chemical Dispenser Dossing System (Dyeing) AREL ATC 304 controller 24 Individual valves Variable speed pump with flow meter

276

D 174 1980 VALD HENIRKSEN

Atmospheric Dyeing Jig – Jet No. 24 Width: 3000mm AREL ATC 304 controller Dossing tank

284



281



286






285



282



283

D 180 1997 THIES Pressure Beam Dyeing Machine Water capacity: 5480 litre Diameter: 1300mm Length: 3000mm Auxiliary Pre heat water tank AREL ATC 304 controller

288




D 181 Various VARIOUS Spare parts for Thies Dying machines suitable to all Thies lots. - Lots 150 - 155 Lot 160 Lots 165 - 166

Main Pump shaft complete with impeller, all new seals, bearings, assembled ready for insertion into pump housing 2 x new fed pumps (still in original packaging) Winch motors Winch reels Winch seals Winch shafts Arel Controllers ATC304 Arel ATC 304 I/O boards 3 Way and 5 Way Crouze solenoid valves for mounting onto pneumatic manifold

036

032

016

063

064

D 182 1985 JC BROWN

3 x Pressure Beam Dyeing Machine Water capacity: 4500 litre Diameter: 1250mm Length: 2500mm Auxiliary Pre heat water tank AREL ATC 304 controller

31

D 183 1986 JC BROWN Pressure Beam Dyeing Machine Water capacity: 2000 litre Diameter: 700mm Length: 2500mm Auxiliary Pre heat water tank AREL ATC 304 controller

32




F 184 1996

BIANCO Slitter Machine – Pad Mangle Slitter No. 1 Width: 2200mm Bianco entry squeezing unit Bianco de-twisting unit

290

F 185 1998 BIANCO Slitter Machine – Pad Mangle Slitter No. 2 Width: 2220mm Bianco entry squeezing unit Bianco de-twisting unit

292

F 186 1991 BIANCO Slitter Machine – Pad Mangle Slitter No. 3 Width: 4000mm Bianco entry squeezing unit Bianco de-twisting unit

294

F 187 1997 SANTEX Continuous Tumble Dryer – No. 5 2200mm Bianco pad mangle 3 bay double decker Gas fired burners

299




F 188 1991 SANTEX Continuous Tumble Dryer – No. 7 3000mm Kusters pad Mangle 6 bay Gas fired burners Chain entry Bianco Fabric centering device

303

F 189 Various SANTEX Spare parts for Santex Dryers Teflon belts Modulated valves

001

005

022

F 190 1994 MONFORD MONTEX

6 Bay Gas Fired Stenter – No. 4 Width: 3400mm Bianco centering device Kuster pad mangle Bianco weft straightener Overhead bridge controls Centre and edge cutters / slitters Horizontal pin chain

307

F 191 VARIOUS Spare parts for Monford Stenter 6 x cans Kluber special high

temperature grease for the fabric transport chain

Fabric transport chain pins Digital counters for width control New entrance arm hinge

(still in original packaging) Gas burner main modulating valve Hot air circulating fan motors

053




F 192 VARIOUS Spare parts for Monford Stenter 030

050

F 193 1988 BRUCKNER Stenter – No. 6 Width: 2400mm 5 bay gas fired Horizontal pin chain Kusters pad mangle Bianco weft straightener Overhead bridge controls Edge cutters

311

F 194 1987 BRUCKNER Stenter – No. 3 Width: 2400mm 6 bay gas fired Mahlo weft straightener Kusters pad mangle Overhead bridge controls Horizontal pin chain Edge cutters

316

F 195 1987- 1988

VARIOUS

Spare parts for Bruckner Stenter machines Over feed wheels gear boxes 1 x 20ltr drum Kluber Lavora Varyspeed special gearbox oil Overfeed top and bottom rollers with Selson Motors (Electrical Shaft) matching pairs 1 x new complete latest version of Erhard & Leimer in feed guiding system consisting of Controller DC5501 2 x Actuators KR 5230 (left and right) 2 x Edge sensors FR 5502 (left and right) in original packaging In feed Guiding System – left and right actuators Edge trimming circular blades & suction motors Variable speed Shrager motors for the main chain drive Circulating hot air fan motors One width adjustment left and right threaded shaft

006




021

056

045

046

060

011

F 196 1985 KUSTERS Pad Mangle – Separate padder No. 2 Width: 3400mm

320

F 197 1983 KUSTERS Pad Mangle – Separate padder No. 1 Width: 2400mm

322

F 198 1993 MARIO CROSTA Double Head Brushing Machine – No. 1 Width: 2200mm Vacuum filter system with 6 outlets

323




F 199 1996 MARIO CROSTA Double Head Brushing Machine – No. 2 Width: 2200mm Vacuum filter system with 6 outlets Includes brushing or sueding facilities

326

F 200 1986 FAB CON Steam Calender – Tubular fabric Width: 90mm Maximum

332

F 201 2007 HIEMAC Fabric folding and blocking machine 336

F 202 2008 HSING CHENG Wrapping Machine Automated entry Shrinkage oven Automated roll replacement unit

337




F 203 Various HSING CHENG Wrapping machine parts Main seal and cutter complete top and bottom attachments Complete left and right seal and edge cutter attachments

No Image

F 204 5 x Inspection Tables – Australian Made Lighting and Truemeters

342

F 205 1980 COLSMAN KIRSHNER

Wrapping Machine Width: 2500mm

343

F 206 Metal Stillages Quantity: approximately 2000 Collapsible Dimensions: mm – 1730L x 1250W x 1470H

374




F 207 Plastic Fabric Trolleys Quantity: approximately 200 On wheels Dimensions: mm – 2000L x 830W x 1100H

345

F 208 2006 COMATEX Folding and Bagging Machine Width: 2600mm Automated centering

349

F 209 1997 AREL Chemical Dossing System – for Stenters /Padding AREL main control cabinet 20 individual valves Krohne variable speed pump with flow meter 6 outlets to stenters

352

F 210 RAMISCH Shrinkage Calendar Width: 1600mm Steel and cotton covered rolls Includes spare rollers

363




F 211 Honest Tubular Automatic Turning Machine 365

F 212 BIANCO Slitting Machine 368

F 213 1985 STORK Single Head Rotary Printer 375

L 214 A & D EK 200G Electronic Balance - No. 1 Number: 18085094

760




L 215 SOLSTAT FET

PH Meter – No.2 120 EPM

761

L 216 SHIRLEY Laboratory Oven / Incubator – No. 3 SDL 209A

762

L 217 JAMES HEAL & CO ICI Pilling Tester – No. 4 116 /2 116 /1177

763

L 218 JAMES HEAL & CO IWS Viewing Cabinet – No. 5 1058

764




L 219 SHIRLEY Fryma Dual Extensimeter – No. 6 2592

767

L 220 SPEED QUEEN Upright Washing Machine – No. 7 Commercial washer

768

L 221 FISHER & PAYKEL Upright Washing Machine – No. 8 Pride 5.5

770

L 222 Z I P Drying Cabinet – No. 9 Soft – Dry

771




L 223 SIMPSON Tumble Dryer –No. 10 Maxi Dry 1200S

772

L 224 SHIRLEY Hand Crock meter – No. 11 SDL 238A, 0909U

773

L 225 SHIRLEY Perspirometer –No. 12 SDL 231, 03890

774

L 226 SDL ATLAS Rotawash for Colour Fastness to washing – No. 13 M228b 628H0015

775




L 227 MBTF LAMP

Light Fastness Tester –No. 14 777

L 228 HANIMEX CROP LTD

Colour Viewing Cabinet – No. 15 Xenon Colour Booth

778

L 229 A & D COMPANY Electric Balance – FY 200 - No. 16 5513068

779

L 230 A & D COMPANY Electric Balance – EK 20G – No. 17 N0519500

795




L 231 A & D COMPANY Electric Balance – EK 200G – No. 19 J8028741

797

L 232 A & D COMPANY Electric Balance – FY 200 – No. 20 5509860

798

L 233 ICS – TEXICON ICS Viewing Cabinet – No. 21 Multilight ML 1896/9

780

L 234 C & B ENGINEERING

Electrical Conical Table – No. 38 TNC – BRUS 1911B

782




L 235 C & B ENGINEERING

Electronic Warp yarn testing equipment – No. 37 Metric System 98149

783

L 236 ANDREW THOM LTD

Laboratory Oven – No. 39 Qualtex 4589

784

L 237 VARIAN AUSTRALIA

Carry 50 Scan Spectro Photometer – No. 42 EL0409 - 3546

785

L 238 INSTRON PTY LTD Testing System – No. 43 786




L 239 ROACHES Infra Red Laboratory Dyeing Machine – No. 46 3 bay Sedomat Controllers

787

L 240 ZELTEX AG Laboratory Atmospheric Temperature Dyeing Apparatus – No. 51 Vistacolour High-Boy with PC1000 Microprocessor control unit

791

L 241 ZELTEX AG Laboratory Atmospheric Temperature Dyeing Apparatus – No. 52 Vistacolour High-Boy with PC1000 Microprocessor control unit

792

L 242 ERNST BENZ AG Laboratory Padder – No. 52 – check should be 53 KLF – HV

793




L 243 ERNST BENZ AG Laboratory Sample Stenter – No. 53 – check should be 54 Minitherm MT

794

L 244 DATACOLOUR INT SPECTRAFLASH

Spectro Photo Meter Colour System – No. 55 SF 650X QC Software colour tools, V3.1 & 3.2 for data process textile dyeing production Recipe management

279

L 245 DATACOLOUR INT SPECTRAFLASH

Spectro Photo Meter Colour System – No. 56 SF 650X QC Software colour tools

91

L 246 MATHIS Laboratory HT Beaker Dyer –No. 49

790

L 247 MATHIS Laboratory HT Beaker Dyer – No. 50




L 248 Various VARIOUS Various spare parts laboratory machinery

FO 249 2001 TOYOTA Fork Lift Run Hours: 9103 Model: 42-7FG 25 Capacity: 2.5 Tons Registration Number: XLR341

389

FO 250 2007 TOYOTA Fork Lift Run Hours: 4034 Model: 32-8FG 25 Capacity: 2.5 Tons Registration Number: 76818C

400

FO 251 1994 KOMATSU Fork Lift Run Hours: 8850 Model: 25-11 Capacity: 2.5 Tons Registration Number: TEQ 457

398




FO 252 1988 HYSTER Fork Lift Run Hours: 5266 Capacity: 2.5 Tons Registration Number: PUO 954

401

FO 253 1975 HYSTER Fork Lift Run Hours: 5484 Model: H2.50XI Capacity: 2.5 Tons Registration Number: RLV 204

407

FO 254 1996 TOYOTA Diesel Fork Lift Run Hours: 7045 Model: 02-SFO 35 Capacity: 3.5 Tons Serial Number: 11883

386

FO 255 2011 TOYOTA Fork Lift Run Hours: 0698 Model: 32-8FG 25 Capacity: 2.5 Tons Registration Number: 11387-D

385




FO 256 2012 TOYOTA Fork Lift Run Hours: 0220 Model: 32-8FG 18 Capacity: 1.8 Tons Registration Number: 12250-D

403

FO 257 2009 TOYOTA Fork Lift Run Hours: 0900 Model: 32-8FG 15 Capacity: 1.5 Tons Registration Number: 99429-C

382

FO 258 2001 TOYOTA Fork Lift Run Hours: 9097 Model: 42-7FG 25 Capacity: 2.5 Tons at stock service Registration Number: XLR 340

391

FO 259 1982 KOMATSU Fork Lift Run Hours: 7103 Model: 25-11 Capacity: 2.5 Tons at stock service Registration Number: RXC 963

392




FO 260 1982 HYSTER Fork Lift Run Hours: 2760 Model: H2-50XL Capacity: 2.5 Tons at stock service Registration Number: PLM 990

390

FO 261 CROWN Fork Lift Model: 20 MT 90 AE Capacity: 1000kg Maximum lift: 2000mm Serial Number: 62546

381

FO 262 CROWN Prong Lift Model: 20 MTA Capacity: 1000kg Maximum lift: 3300mm Serial Number: 34609

387

FO 263 CROWN Prong Lift Model: 30 WTF 130A Capacity: 1500kg Maximum lift: 3300mm Serial Number: 2A103845

388




FO 264 CROWN Pallet Mover Model: 60PW 2754 / PW 3520-1 Battery Operated Lift capacity: 3000kg Maximum Lift 2400mm Serial Number: 2A104598

402

FO 265 JLG Stock Picker Model: 10MSP Battery Operated Lift capacity: 275kg Maximum lift: 2100mm at stock service Serial Number: 01300 128 71

393

FO 266 NILFISK Ride on Sweeper Model: SR 1200 PECO Serial Number: 00378165

384

C 267 1970 TOMLINSON STEEL Steam Boiler Model: CB 621.500.150 Fire Tube 500HP Natural gas Capacity: 17,250lbs p/h Maximum pressure: 150lbs Serial Number: 18588

405




C 268 1986 NEI JOHN THOMPSON

Steam Boiler Model: Super “D” Water Tube SD7 700HP Natural Gas Combustion equipment Design Pressure: 1750kpa Steam Output: 11165kg/hr Registration Number: B8039

404

C 269 2002 CHAMPION Air Compressor Model: CSD 55 55kw Serial Number: 7686

329

C 270 1997 CHAMPION Air Compressor Model: CSD 75 75kw Serial Number: 5717

328

C 271 1990 CHAMPION Air Compressor Model: DX 200 150kw Includes Hiros air dryer Includes steel air tanks Serial Number: 3230

396




C 272 1999 CHAMPION Air Compressor Model: CSX 160 160kw Serial Number: 6427

394

C 273 KAESER Air Compressor Model: AS 36 22kw Serial Number: 3610423

355

C 274 KAESER Air Compressor Model: AS 36 22kw Serial Number: 3610424

356

C 275 QUANTUM Air Compress & Air Dryer As one unit – cannot be separated

371




C 276 ULTRA LOGIC Quality Air

Air Dryer Model: CP 0450 AX Type: 749A Serial Number: 042/17119/24

354

C 277 ULTRA LOGIC Quality Air

Air Dryer Model: CP 0450 AX Type: 749A Serial Number: 051/17760/03

357

C 278 1994 ULTRA LOGIC Quality Air

Air Dryer Model: CP 1300 AX Type: 756 36kw Serial Number: 051/17636/19

330

C 279 1994 ULTRA LOGIC Quality Air

Air Dryer Model: CP 1300 AX Type: 756 36kw Serial Number: 051/17636/20

331

PROPOSAL - Knitting Industry

Documents

Transcript of PROPOSAL - Knitting Industry