Post on 06-Jan-2023
Procedia Engineering 109 ( 2015 ) 450 – 456
1877-7058 © 2015 The Authors. Published by Elsevier Ltd. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).Peer-review under responsibility of the Gruppo Italiano Frattura (IGF)doi: 10.1016/j.proeng.2015.06.262
ScienceDirectAvailable online at www.sciencedirect.com
aFaculty of Science and Technology, Free University of Bozen-Bolzano, Piazza Università 5, Bolzano 39100, Italy bDepartment of Management and Production Engineering, Politecnico di Torino, C.so Duca degli Abruzzi 24, Torino 10129, Italy
Keywords:
E-mail address:
© 2015 The Authors. Published by Elsevier Ltd. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).Peer-review under responsibility of the Gruppo Italiano Frattura (IGF)
CORE Metadata, citation and similar papers at core.ac.uk
Provided by Elsevier - Publisher Connector
451 Pasquale Russo Spena et al. / Procedia Engineering 109 ( 2015 ) 450 – 456
Q&P TRIP Q&P TRIP
C
Mn
Si
Al
453 Pasquale Russo Spena et al. / Procedia Engineering 109 ( 2015 ) 450 – 456
3.2. Shear tension strength
454 Pasquale Russo Spena et al. / Procedia Engineering 109 ( 2015 ) 450 – 456
3.3. Modes of fracture