Procedia Engineering 109 ( 2015 ) 450 – 456

1877-7058 © 2015 The Authors. Published by Elsevier Ltd. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).Peer-review under responsibility of the Gruppo Italiano Frattura (IGF)doi: 10.1016/j.proeng.2015.06.262

ScienceDirectAvailable online at www.sciencedirect.com

aFaculty of Science and Technology, Free University of Bozen-Bolzano, Piazza Università 5, Bolzano 39100, Italy bDepartment of Management and Production Engineering, Politecnico di Torino, C.so Duca degli Abruzzi 24, Torino 10129, Italy

Keywords:

E-mail address:

© 2015 The Authors. Published by Elsevier Ltd. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).Peer-review under responsibility of the Gruppo Italiano Frattura (IGF)

CORE Metadata, citation and similar papers at core.ac.uk

Provided by Elsevier - Publisher Connector

451 Pasquale Russo Spena et al. / Procedia Engineering 109 ( 2015 ) 450 – 456

Q&P TRIP Q&P TRIP

C

Mn

Si

Al

452 Pasquale Russo Spena et al. / Procedia Engineering 109 ( 2015 ) 450 – 456

3.1. Microstructure

453 Pasquale Russo Spena et al. / Procedia Engineering 109 ( 2015 ) 450 – 456

3.2. Shear tension strength

454 Pasquale Russo Spena et al. / Procedia Engineering 109 ( 2015 ) 450 – 456

3.3. Modes of fracture

455 Pasquale Russo Spena et al. / Procedia Engineering 109 ( 2015 ) 450 – 456

456 Pasquale Russo Spena et al. / Procedia Engineering 109 ( 2015 ) 450 – 456