pctvvn2002a.pdf - Daikin
-
Upload
khangminh22 -
Category
Documents
-
view
3 -
download
0
Transcript of pctvvn2002a.pdf - Daikin
• Ask a qualified installer or contractor to install this product. Do not try to install the product yourself. Improper installation can result in water or refrigerant leakage, electrical shock, fire or explosion.
• Use only those parts and accessories supplied or specified by Daikin. Ask a qualified installer or contractor to install those parts and accessories. Use of unauthorised parts and accessories or improper installation of parts and accessories can result in water or refrigerant leakage, electrical shock, fire or explosion.
• Read the user's manual carefully before using this product. The user's manual provides important safety instructions and warnings. Be sure to follow these instructions and warnings.
• About harmonics, since this product is equipped with an inverter, harmonics will be generated. If local laws require the suppression of harmonics on the building, please take harmonic suppression measures on the electrical equipment side. Please contact your local sales company for details.
If you have any enquiries, please contact your local importer, distributor and/or retailer.
Gen
eral Catalo
gu
eC
oo
ling
On
ly / Heat Pu
mp
50 Hz
VRV is a trademark of Daikin Industries, Ltd.VRV Air Conditioning System is the world’s first individual air conditioning system with variable refrigerant flow control and was commercialised by Daikin in 1982.VRV is the trademark of Daikin Industries, Ltd., which is derived from the technology we call “variable refrigerant volume.”
©All rights reserved 10/20 AK
Specifications, designs and other content appearing in this brochure are current as of October 2020 but subject to change without notice.
Cautions on product corrosion1. Air conditioners should not be installed in areas where corrosive gases, such as acid gas or alkaline gas, are produced.2. If the outdoor unit is to be installed close to the sea shore, direct exposure to the sea breeze should be avoided. If you need to
install the outdoor unit close to the sea shore, contact your local distributor.
Cooling Only / Heat Pump 50 Hz
Số 74 Lê Lợi, P. Hưng Bình, TP. Vinh
PCTVVN2002A
1 2
First launched in Japan in 1982, the Daikin VRV system has been embraced by world markets for over 35 years. Daikin proudly introduces the advanced VRV system. By combining the technologies of VRV, VRT and VAV, we have attained both energy savings and comfortable air conditioning.
VRVX series / A series
movie
Energy savings & comfort• Uniting VRV, VRT and VAV technologies• Quiet operation
Design flexibility & easy installation• Automatic refrigerant charge function• Varied lineup of models
High reliability• Refrigerant cooled PCB• Double backup operation• Heavy anti-corrosion model
Exceeding Boundaries with Innovative Energy Savings New Products Information
VRV Development History
VRV User Benefits
VRV Overview
VRV X Series
VRV A Series
VRV H Series
VRV S High Efficiency Series
VRV IV S Series
VRV IV Q Series
VRV IV W Series
VRV IV Heat Recovery Hot Water System
Indoor Unit Overview
VRV Indoor Units
Residential Indoor Units
Air Handling Unit
Air Treatment Equipment
Control Systems
Precision Piping Method
Option List
Daikin Engineering Supports
3
5
7
9
13
31
49
67
81
89
105
119
133
135
141
145
147
149
151
153
154
155
157
159
161
162
163
165
166
167
168
169
171
172
173
174
175
176
193
207
211
225
C o n t e n t s
*VRV is a trademark of Daikin Industries, Ltd.
FXFSQ-A
FXFQ-A
FXZQ-A
FXCQ-A
FXEQ-A
FXDSQ-A
FXDQ-PD/ND
FXDQ-SP
FXSQ-PA
FXMQ-PA
FXMQ-P
FXUQ-A
FXHQ-MA/A
FXAQ-A
FXLQ-MA
FXNQ-MA
FXVQ-N
FXPQ-A
FXB(P)Q-P
FDXS-EA/C(A), CDXS-EA, FDXS-C
FTKJ-N, FTXJ-N
FTKS-D/B/F, FTXS-D/E/F
BPMKS-A
Type
Round Flow Cassette with Sensing
Round Flow Cassette
Compact Multi Flow Cassette
Double Flow Cassette
Single Flow Cassette
3D Airflow Duct with Sensing
Slim Duct (Standard)
Slim Duct (Compact)
Middle Static Pressure Duct
Middle-High Static Pressure Duct
High Static Pressure Duct
4-Way Flow Ceiling Suspended
Ceiling Suspended
Wall Mounted
Floor Standing
Concealed Floor Standing
Floor Standing Duct
Spot Air Conditioner
Clean Room Air Conditioner
Type
Slim Ceiling Concealed Duct
Wall Mounted
Wall Mounted
BP Units
3 4
New Products Information
A revolution in piping works for VRV system!Quiet, compact, designed for user comfort
Precision Piping MethodCompact Multi Flow Cassette
Personal air comfort delivered to large spaces
Spot Air Conditioner
The ideal air conditioning system for residential houses, small offices and shops
Higher energy efficiencyVRT Smart Control Quiet operation
Non-brazing workSave installation time without special skills
A complete redesigned controller focused to enhance user experience
Stylish Remote Controller
Two attractive colors to match any interiorCompact, measures only 85 x 85 mmEasy setting via Bluetooth App with smartphone (for Installer/Facility manager)Improved setback function to keep hotel room comfortable
Extended operation range up to 52°CHigh voltage shield PCBAutomatic refrigerant charge function
Compact & Elegant DesignFully-flat integration in standard architectural ceiling tilesEfficiency & ComfortTwo optional intelligent sensors improve energy efficiency and comfort.
The high external static pressure of 40 Pa enables installation in small installation spaces where the airflow direction needs to be diverted to avoid short circuits.Low height casing designIncreased actual piping length up to 120 m
FXZQ-A
FXPQ-ANo ducts required!
Header Pack(Packaged Refnet Headers)
Daikin Gas Tight Joint(Fire free connection for piping)
Save time using quick flare nut connection
Hot work permit is not necessary
Energy savings& comfort
High performance& reliability
Designflexibility ofinstallation
RSU(Y)Q-A
67Page
207Page
145Page
168Page
193Page
BRC1H61W (White) BRC1H61K (Black)
PresentationMovie
BHF-RHP6Z
BDGTA
5 6
The 1st Generation
2008
VRV-WIII series
2011
VRV IIIConnection to residential
indoor unit series
VRV IIIConnection to residential
indoor unit series
VRV Multi function seriesCooling/heating, hot water supply
2014
VRV IV S seriesVRV IV S series
VRV IVHeat recovery
2010
VRV III Q seriesReplacement use
1984
VRV D seriesCooling only
1990
VRV G seriesHeat pump
1995
VRV H seriesMade possible to connect to BMS using the DIII-NET
1999
VRV K Plus series
2002
VRV L seriesAdopted the new R-407C
refrigerant
2006
2007
VRV III-C seriesLow outdoor temp.
area use
VRV II MA series
2005
1992
VRV G seriesHeat recovery
1996
VRV K series
2000
VRV KA series
1988
VRV F seriesCooling only
VRV II M seriesAdopted the new R-410A
refrigerant
2004
VRV II-S series
2012
VRV IVCooling only / Heat pump
2015
VRV IV Heat Recovery Hot Water System
2016
2017
2018 2020
2019
1982
To meet the needs of the times, we've been continuously developing technologies as the leading air conditioning manufacturer in the world.
VRV Development History
Expansion of the country of sale
Sales companies well established in more than 70 countries
BrazilArgentinaChileColombiaPanamaPeru
South America
USAMexicoCanadaPuerto Rico
North America
UAESaudi ArabiaBahrainJordanOmanQatar
Middle East
AustraliaFijiNew CaledoniaNew ZealandTahiti
OceaniaIndiaVietnamThailandIndonesiaMalaysiaSingaporePhilippine
CambodiaMyanmarMaldivesNepalSeychellesPakistanSri Lanka
Asia
JapanChinaKoreaTaiwan
NetherlandsPolandPortugalFinlandGreeceHungary IrelandRomania SerbiaSlovakiaSwedenSwitzerlandTurkeyUkraine
ItalyFranceGermanySpainRussiaUKAustriaBelgiumBulgariaCroatiaCyprusCzechLithuaniaMacedonia
Europe
South AfricaAlgeriaBurkina FasoEgyptIvory CoastSenegalSudan
Africa
VRV series released in 1982
• 2.5-year development term • Completion of development in May, 1982• Technical award of Japan Society of Refrigerating & Air-conditioning Engineers in 1983
*VRV is a trademark of Daikin Industries, Ltd.
The birth of innovative products that changed the history of air conditioning technology
VRV IV W seriesWater cooled system
VRV IV W seriesWater cooled system
VRV IV Q seriesReplacement use
VRV A seriesCooling only
VRV X seriesCooling only
VRV X seriesCooling only
VRV H seriesHeat pump
VRV A MAXHeavy anti-corrosion
VRV X MAXHeavy anti-corrosion
VRV S High Efficiency SeriesVRV C seriesCooling only
VRV-WIIseries
VRV III-S series
VRV III series
7 8
VRVCooling tower
Garage
Malfunction MalfunctionEmergencyoperation
Emergencyoperation
BP unit
Min. sound level 19 dB(A)
VRV User Benefits
For property OWNERS
Varied lineup of models• With various types of indoor units available, comfortable airflow is ensured in every space.
Long piping provides more flexible system design• Maximum equivalent piping length between indoor and outdoor unit is 190 m.• Maximum height difference is 90 m.
Compatible with engineering software• Daikin provide the software, the simulation results, and drawing materials to support the building
information modeling (BIM) currently entering the mainstream in construction industries.
Energy efficient• Achieves your green building solution by Daikin’s innovative
energy-saving technology.
Automatic refrigerant charge function• Automates the charging of proper refrigerant amount to contribute to optimised operation efficiency,
higher quality and easier installation.
Lightweight and compact large-capacity single units• Easy to install and can be transported in elevators.
Simple piping, easy wiring• The REFNET piping system and DIII-NET system simplify refrigerant piping and control wiring installation.
For INSTALLERS
For CONSULTANT and DESIGN OFFICES
Comfortable environment• VRT Smart operation maintains the indoor temperature
and ensures a comfortable environment.
Residential indoor units• Residential indoor units can be connected and it is possible
to realise quiet operation.
• By remotely installing an BP unit, the noise of refrigerant passing though the piping can be reduced.
For USERS
High reliability• Refrigerant cooled PCB
Daikin’s unique refrigerant cooling helps maintain high cooling capacity even during high outdoor temperatures.
• Double backup operationUnit backup & Compressor backup ensure continuous operation. • Heavy anti-corrosion model
The heavy anti-corrosion models can provide durable operation at humid and seaside areas.Also, outdoor unit can be installed from 0 m from coastline.
Energy saving & comfortable environment• VRT Smart greatly reduces the energy by
optimising the capacity according to heat load, especially during low-load operation.
• Comfortable indoor environment is maintained at the time.
Efficient space utilisation• When construct a large-scale air conditioning
system on a single refrigerant system, space for air conditioning is drastically reduced.
• Even with a 20-storey building all of the outdoor units can be installed on the rooftop.
Refrigerant piping
Print circuit board
CADXpress
CADXpress
R-410A
9 10
Wide Variety of Series Models to Supply Total Air Solutions
From residential houses to large buildings, and from newly constructed to renovated buildings, VRV system meets a wide range of air conditioning needs and supplies total air solutions.
81Page
89Page
105Page
119Page
13Page
31Page
49Page
67Page
New heights in energy efficiencyduring actual operationThe VRV X series features new models specially developed for higher efficiency. All compressors used in outdoor units are new scroll compressors designed to enhance energy efficiency.
60HP 5856545250484644424038363432302826242220181614121086Single outdoor units
Double outdoor units
Triple outdoor units
Lineup
Especially designed for residential houses, small offices and shopsVRV IV S series aims to provide sufficient capacity, along with the compact size required by residential houses, small offices and shops. Outdoor units are designed to be slim and space saving, and offer 5 models to suit your needs.
HP 98654Cooling Only
Heat Pump
Lineup
Achieves space saving & excellent performance to meet the needs in various buildingsThe VRV H series achieves high efficiency in a design that is more compact and lightweight. It also offers comfort, easy installation, and high reliability to meet the needs in various buildings.
60HP 5856545250484644424038363432302826242220181614121086High-COP Type
Standard Type
Lineup
Saves space and delivers excellent performanceThe VRV A series achieves high efficiency in a design that is more compact and lightweight. It also offers comfort, easy installation, and high reliability to meet the needs in various buildings.
60HP 5856545250484644424038363432302826242220181614121086Single outdoor units
Double outdoor units
Triple outdoor units
Lineup
Especially designed for residential houses, small office and shopsNew VRV S High Efficiency Series achieves higher energy efficiency with a variety of function for comfort and high performance. A wide range of options for installation location and application are easily achieved by the low height casing, long piping length and other features.
HP 7654Cooling Only
Heat Pump
Lineup
RXUQ-AW
Heavy anti-corrosion model
Heat Pump Heat Pump
Cooling Only / Heat Pump
Cooling Only
Comfortable air conditioning and energy-efficient hot water heatingThis energy-efficient, multifunction system recovers waste heat generated by air conditioning, as energy to heat water. It is suitable for different business applications and provides flexible combination of VRV IV indoor units achieving comfort and aesthetic.
60HP 5856545250484644424038363432302826242220181614121086High-COP Type
Standard Type
Space Saving Type
Lineup
Cooling Only
Cooling Only
RXQ-AW
Heavy anti-corrosion model
For quick & high quality replacement use
VRV IV Q series, a replacement VRV unit, can be installed using existing refrigerant piping, so renovation of the air conditioning system can be carried out quickly and smoothly. This minimises inconveniences to activities and users in the building.
HP 484644424038363432302826242220181614121086Standard Type
Space Saving Type
Lineup
Water cooled system suitable for tall multi-storied buildings
Water cooled VRV IV W series utilises water as a heat source. The temperature of heat source water can be from 10°C to 45°C, and outdoor air temperature does not affect cooling capacity. The outside unit is compact and saves space in the machine room.
HP 363432302826242220181614121086Heat Pump
LineupRXYQ-A3-phase 4-wire system,
380-415 V/380 V, 50/60 Hz
RSU(Y)Q-A4-6 HP
7 HP: 1-phase, 220-240 V/220-230 V, 50/60 Hz : 3-phase, 380-415 V/380 V, 50/60 Hz
4 HP: 1-phase, 220-230 V/220 V, 50/60 Hz5-6 HP: 1-phase, 220-240 V/220-230 V, 50/60 Hz8-9 HP: 3-phase, 380-415 V, 50 Hz
RXQ-A3-phase 4-wire system,
380-415 V/380 V, 50/60 Hz
RWEYQ-T3-phase 4-wire system,
380-415 V/380 V, 50/60 Hz
RWHQ-T / HWHQ30A3-phase 4-wire system,
380-415 V/380 V, 50/60 Hz
RXUQ-A3-phase 4-wire system,
380-415 V/380 V, 50/60 Hz
RX(Y)MQ-A/B
RQ(Y)Q-T3-phase 4-wire system,
380-415 V/380 V, 50/60 Hz
Cooling Only / Heat Pump
Cooling Only / Heat Pump
11 12
Floo
r St
andi
ngCe
iling
Susp
ende
dC
ateg
ory
Cei
ling
Mou
nted
Cas
sett
eC
eilin
g C
once
aled
Duc
t
Wide Range Indoor Unit Lineup Create Comfortable Airflow
Note: For indoor units connectability, please refer to the indoor unit product lineups under individual outdoor unit series.
20
20
2.0
25 35
25 35
2.5 3.5
50 60 71
50 60 71
5.0 6.0 7.1Rated Capacity (kW)Type Model Name
Capacity Index
Slim CeilingConcealed Duct
Wall Mounted
Cooling Only
Heat Pump
FTKJ-NVMVW
FTXJ-NVMVW
Cooling Only
Heat Pump
FTKJ-NVMVS
FTXJ-NVMVS
Cooling Only
Heat Pump
FTKS-FVM
FTXS-FVMA
Cooling Only
Heat Pump
FDKS-EAVMB
CDXS-EAVMA
Cooling Only
Heat Pump
FDKS-C(A)VMB
FDXS-CVMA
Cooling OnlyHeat PumpHeat Pump
FTKS-DVMFTXS-DVMAFTXS-EVMA
Cooling Only FTKS-BVMA
(700 mm width type)
(900/1,100 mm width type)
VRV indoor units Residential indoor units with connection to BP units
FXDSQ-AVM3D Airflow Duct with Sensing
FXSQ-PAVEMiddle Static Pressure Duct
Capacity Range
Capacity Index 20
0.8 HP
20
1.6 HP
40
2.5 HP
63
3.2 HP
80
3 HP
71
4 HP
100
5 HP
125
6 HP
140
8 HP
200
10 HP
250
2 HP1.25 HP
32
62.531.25
1 HP
25Type Model Name
FXFSQ-AVMRound Flow Cassette with Sensing
Round Flow Cassette
Compact Multi Flow Cassette
Double Flow Cassette
Single Flow Cassette
Slim Duct (Standard)
Middle-High Static Pressure Duct
High Static Pressure Duct
Ceiling Suspended
Wall Mounted
Floor Standing
Concealed Floor Standing
4-Way Flow Ceiling Suspended
Outdoor-Air Processing Unit
FXVQ-NY1
FXVQ-NY16(high static pressure type)
Floor Standing Duct
Spot Air Conditioner
FXDQ-SPV1Slim Duct (Compact)
400
16 HP
500
20 HP
FXMQ-MFV1
Heat Reclaim Ventilator
Air Handling Unit
Heat Reclaim Ventilator with DX-Coil and Humidifier
VKM-GA(M)V1
VAM-GJVE
AHUR
Airflow rate 500-1000 m3/h
Airflow rate 150-2000 m3/h
Clean Room Air ConditionerFXBQ-PVE
FXBPQ-PVE
FXEQ-AV36
FXFQ-AVM
FXZQ-AVM
FXPQ-AVN
FXCQ-AVM
FXMQ-PAVE
FXMQ-PVM
FXHQ-AVM
FXUQ-AVEB
FXHQ-MAVE
FXAQ-AVM
FXLQ-MAVE
FXNQ-MAVE
FXDQ-PDVE(with drain pump)
FXDQ-PDVET(without drain pump)
FXDQ-NDVE(with drain pump)
FXDQ-NDVET(without drain pump)
(700 mm width type)
(900/1,100 mm width type)
6–120 HP
50
40 8071 100 125 140 200 25025 400 50050
New lineup
13 14
VRV X Series
VR
V X
Ser
ies
* Simulation conditions:• Location: Bangkok, Thailand
• System: Outdoor unit (10 HP) x 1
Indoor unit (2 HP, Round Flow with Sensing type) x 5
• Operation time: 8:00-20:00 5 days/week
• Outdoor units: New model: RXUQ10A (VRV X series)
Conventional model: RXQ10T (VRV IV)
* Cooling operation conditions: • Indoor temperature of 27ºCDB, 19ºCWB, and outdoor temperature of 35ºCDB.
Daikin’s VRV X series raised the standard of energy efficiency.
Greater energy savings during low-load operation
Higher Energy Efficiency Ratio (EER) for 10 HP
* Data source• Number of properties connected to the Air
Conditioning Network Service System: 42 projects
• Number of outdoor unit systems: 535 systems
• Data collection period: 8:00-18:00, weekdays
(excluding public holidays), from July 2015 to June
2016 in office buildings in Singapore.
10% 20% 30% 40% 50% 60% 70% 80% 90% 100%0
Load factor for the rated capacity
Op
erat
ion
per
iod
0
3
4
5
6
7
8
9
30% 40% 90% 100%50% 60% 70% 80% Load
Co
olin
g O
per
atio
n E
ER
8.84 8.42 8.197.37
6.435.69
5.084.45
Increased efficiencyduring low-load operation.
The key to innovativeenergy savings
Load factor of 50% or less
accounts for 80% of annual
operation period.
Conventional model New model
20%Lower
Annual powerconsumption
Single outdoor units
RXUQ6-20AYM(W)
Double outdoor units
RXUQ12-40AMYM(W)
Triple outdoor units
RXUQ18-20AM1YM(W)RXUQ42-60AMYM(W)
*(W): Heavy anti-corrosion model
6HP–60HP
Cooling Only
(16 kW) (168 kW)
New Heights in Energy Efficiency During Actual Operation
15 16
VRV X Series
VR
V X
Ser
ies
New intermediate pressure mechanism
Advanced Technologies
Back pressure control mechanism
Refrigerant leakage is minimized during low-load operationOptimally supply only for the needed capacity of indoor units
Advanced technologies for greater energy savings
• Reduces compressor load and minimizes operation loss so it is energy saving• Controls capacity according to load to ensure a constant room temperature for greater comfort.
By uniting advanced software and hardware technologies for greater energy savings during actual operation and combining the technologies of VRV, VRT and VAV, we have attained both energy savings and comfortable air conditioning.
Co
mp
ress
or
effi
cien
cy
New compressor
Conventional compressor
Load factor* Graph shown above is for illustration purposes only.
The back pressure control mecha-nism increases the efficiency during low-load operation.
Intermediate pressure adjustment port
The pressure on the orbiting scroll is optimised according to operating conditions. As a result, the orbiting scroll has been stabilised to increase efficiency during low-load operation.* For the classification of indoor units (VRT smart control and VRT control), refer to the indoor unit lineup.
• Refrigerant leakage is minimized by a back pressure control mechanism that increases the efficiency during low-load operation.
Fully Automatic Energy-saving Refrigerant Control
VRT Smart Control VRT Smart Control Function movie
New ScrollCompressormovie
Software technology New Scroll CompressorHardware technology
Calculate• Indoor airflow rate• Target refrigerant temperature
Determine the target refrigerant temperature
Room temperature and set temperature
Compressor speed control
Coordinated control
17 18
VRV X Series
VR
V X
Ser
ies
I-demand functionPeak power cut-off can be accomplished according to each user situation.
* Set on the PCB of the outdoor unit.
Standby power needed for preheating refrigerator oil was reduced up to 65.4% to save energy when the air conditioner is stopped.
Advanced Technologies
Advanced oil temperature control
High external static pressureVRV X series outdoor unit has been achieved high external static pressure up to 78.4 Pa.
Higher efficiency is provided during rated operation
VRV IV VRV X SERIES
Cooling operation conditions : Indoor temperature of 27°CDB 19°CWB, and outdoor temperature of 35°CDB.
4.32
4.65
4.07
4.45
3.80
4.29
3.74
4.23
3.46
3.95
3.25
3.91
3.11
3.78
Co
olin
g o
per
atio
n E
ER
8 HP6 HP 10 HP 12 HP 14 HP 16 HP 18 HP 20 HP0
3
4
5
4.41
4.95
EER at 100% operation load
* Operation calculation conditions: VRV X series 14 HP Location: Singapore Operation time: 08:00–18:00 on weekdays
Extended operation range up to 49°C
49°C20 30 4010
VRV X Series
Cooling Outdoor temperature (°CDB)
Contribute to optimised operation efficiency, higher quality and easier installation.
This function prevents a capacity shortage or energy loss due to excessive or insufficient refrigerant.
The automatic refrigerant charge function automates the charging of the proper refrigerant amount and the closing of shut-off valves by simply pressing a switch after pre-charging.
• Automatic completion by proper refrigerant amount• Monitoring refrigerant charging is unnecessary• No recalculation of charge amounts due to minor design changes locally
Automatic refrigerant charge function
Optimised operation efficiency
Higher quality and easier installation
Calculation of necessary refrigerant amount from design drawing
1 Pre-charge of refrigerant2 Start of automatic refrigerant charge operation
3
Optimised Operation
Efficiency Cooling capacity
Optimal refrigerantamount
Refrigerant charge amount
Insufficientrefrigerant charge
Excessiverefrigerant charge
Automatic Refrigerant Charge
R-410A
Can be set in
5% increments
Total of 11 levels
Pow
er c
onsu
mpt
ion
Less
Mor
e
* There are conditions in the range of ambient temperature in which the automatic refrigerant charge can be used. Refer to the installation manual for details. * The refrigerant amount that can be automatically charged may differ from the additional refrigerant amount that is provided from calculations, but there are no problems in performance and quality.
Automatic RefrigerantCharge Functionmovie
Note: When outdoor temperature falls below 10°C, the thermostat shuts OFF, the outdoor unit stops, and operation switches from cooling to fan operation.
* When set to 70% demand
100%
70%
50%40%
0%Time
65.4%Reduction
19 20
VRV X Series
VR
V X
Ser
ies
Comfort & ReliabilityComfort
Reliable and stable technology
Nighttime quiet operation function
High reliability at high ambient temperature
PCB
Power Module
RefrigerantRefrigerant JacketHeat
Refrigerant
Using refrigerant to cool the inverter power module helps minimise the size of the electronic components, and this results in reduction of airflow resistance and high efficiency of the heat exchanger.
*1. Initial setting is 8 hours. Can be selected from 6, 8 and 10 hours.*2. Initial setting is 9 hours. Can be selected from 8, 9 and 10 hours.*3. In case of 10 HP outdoor unit.
This enables
Control board failure ratio at stable operation is reduced.
• Suitability for high ambient temperatures
• Miniaturization of electronic components
Peak in the outdoortemperature
8 hrs*1 10 hrs*2
8:00 12:00 16:00 20:00 0:00 4:00 8:00
50%
100%
Night mode ENDSNight mode STARTS
Night quiet mode
Min. 40 dB(A)*3
40 dB(A)
56 dB(A)
Load %
Operating sound dB(A)The nighttime quiet operation function automatically suppresses the nighttime operating sound by reducing operation capacity to maintain the quiet environ-ment of the neighborhood. Three selectable modes are available depending on the required level.
Notes: • This function is available in setting at site.• The operating sound in quiet operation mode is the actual
value measured by our company. • The relationship of outdoor temperature (load) and time
shown above is just an example.
Outer rotor DC motor (ODM)
Only Daikin has adapted an ODM with the feature of stable rotation and volumetric efficiency.
Ease of maintenance
Can provide maintenance feature* without shutting down the whole VRV system.
Double backup operation functions
UNIQUEODM(Outer Type)Conventional Motor(Inner Type)
F
Rotor
F
Rotor
Function of information display by luminous digital tube
VRV X series utilises a bright 7-segment digital display to convey operational status and facilitate simple installation and after-sales service.
7-segment digital display
Displays system operation information directly
SMT* packaging technology
• Improves the anti-clutter performance.• Protects your computer boards from the adverse
effects of sandy climates and humid weather.
*SMT: Surface mounted technology
SMT packaging material
Computer control board
Computer control board surface adopting SMT packaging technology
* For single outdoor unit system RXUQ14-20AYM models. On-site settings are required using the PCB of the outdoor unit.
Malfunction
Malfunction
Emergencyoperation
Emergencyoperation
Automatic sequencing operation
Stage 3
Priority
Automaticsequencing
132
Stage 2
Priority
Automaticsequencing
HIGH TORQUEwith low energy
MORE efficient
213
Stage 1
Priority 321
* Field setting is required. This feature does not apply to residential indoor unit connection. For more information, please contact Daikin sales office.
Unit backup operation function Compressor backup operation function
Area CArea BArea A
21 22
VRV X Series
VR
V X
Ser
ies
The long piping length provides more design flexibility, which can match even large-sized buildings.
Flexible System Design
Long piping length
Connection capacity at maximum is 200%.
Connection ratio
More options for installation location
Installation for VRV indoor units only
Max. 90 m
Between the first indoor branch and the farthest indoor unit
Max. level difference between the indoor units
90 m
Max. level difference between the outdoor units and the indoor units
30 m
Note: The above is just a schematic diagram.
Max. equivalent piping length
190 m
165 m
Max. actual piping length
Max. 13 m1000 mMax. total piping length
Conditions of VRV indoor unit connection capacity
Single outdoor units
Double outdoor units
Triple outdoor units
Applicable VRV indoor units
FXB(P)Q
200%
Other VRV indoorunit models*1
200%160%130%
Connection ratio =Total capacity index of the indoor units
Capacity index of the outdoor units
*1. No special requirements up to 40 m. The maximum actual piping length can be 90 m, depending on conditions. The VRV X series is easy to extend to 90 m by lessening the conditions from conventional VRV IV models. Be sure to refer to the Engineering Data Book for details of these conditions and requirements.
*2. When level differences are 50 m or more, the diameter of the main liquid piping size must be increased. If the outdoor unit is above the indoor unit, a dedicated setting on the outdoor unit is required. Refer to the Engineering Data Book and contact your local dealer for more information.
Maximum allowable level difference
Maximum allowable piping length
Between the outdoor units and the indoor units
Between the indoor units
Between the outdoor units (Multiple use)
Between the first indoor branch and the farthest indoor unit
Between the outdoor branch and the last outdoor unit (Equivalent)
Total piping length
Actual piping length (Equivalent)
30 m
5 m
165 m (190 m)
1000 m
10 m (13 m)
90 m*2
90 m*1
*1 For the FXF(S)Q25, FXPQ and FXVQ models, maximum connection ratio is 130% for the entire range of outdoor units.
Note: If the operational capacity of indoor units is more than 130%, low airflow operation is enforced in all the indoor units.
*Refer to page 25 for outdoor unit combination details.
50%–200%
Connection ratio
Between the outdoor branchand the last outdoor unit
*2
*1
Max. 5 m
Between the outdoor units
FXDQ
FXSQ
FXMQ-PA
FXAQ
Installation for mixed combination of VRV and residential indoor units
Max. total piping length 250 m
Max. equivalent piping length
120 m
Max. actual piping length
100 m
Between the first indoor branch and the farthest VRV indoor unit
Max. level difference between the indoor units
15 m
15 m Max. level difference between the outdoor unit and the indoor unit
50 m
5 m
Note: The above is just a schematic diagram.
BP unit
RA
RA
RA
RA
VRV
BP unit
Max. 15 m
Between BP unit and indoor unitMax. level difference between the
outdoor unit and the BP units
40 m
Max. level difference between BP unit
Max. level difference between the BP unit and the indoor unit
VRV: VRV indoor unit RA: Residential indoor unit
Max. 50 m
Maximum allowablepiping length
Minimum allowable piping length
Maximum allowablelevel difference
Between the outdoor unitand the indoor unit
Between BP unit and indoor unit
Between the indoor units
Between BP units
Between the first indoor branch and the farthest BP unit or between the first indoor branch and the farthest VRV indoor unit
Total piping length
Actual piping length (Equivalent)
Between outdoor unit and the first indoor branch
15 m
15 m
100 m (120 m)
250 m
2 m–15 m
2 m–8 m
50 m*1
5 m
50 mIf the outdoor unit is above.
If the outdoor unit is below.
If indoor unit capacity index < 60.
If indoor unit capacity index is 60 and 71.
40 m
40 m
*1. If the piping length between the first indoor branch and BP unit or VRV indoor unit is over 20 m, it is necessary to increase the gas and liquid piping size between the first indoor branch and BP unit or VRV indoor unit. If the piping diameter of the sized up piping exceeds the diameter of the piping before the first indoor branch kit, then the latter also requires a liquid piping and gas piping size up. Please refer to Engineering Data Book for details.
*When a mixed combination of VRV and residential indoor units is connected or when only residential indoor units are connected, connection ratio must be 50% to 130%. Refer to page 25 for outdoor unit combination details. Between the outdoor unit and the BP unit
5 mBetween the BP unit and the indoor unit
*1
When a mixed combination of VRV and residential indoor units is connected
23 24
VRV X Series
VR
V X
Ser
ies
Achieves both anti-corrosion and high efficiency
High performance technology
New aluminum fins are 21% thicker to maintain performance.
Automated fin coating line
To prevent differences in coating thickness caused by manual application, the additional fin coatings are performed on the latest automated assembly line, maintaining high precision and quality.
Anti-corrosion Technology
Outer casing
Heat exchanger (Fin)
Maximize anti-corrosion and performance
Heavy anti-corrosion model
Multi coating for extreme durability
The hot-dip Zinc-Aluminum-Magnesium alloy coated sheet is optimised for even greater durability with an additional four-layer coating combination.
Anti-corrosion verification by accelerated test
Although the previous anti-corrosion model is rusted, the VRV X MAX outer casing shows no signs of corrosion in either test.
* The cross cut was made in order to simulate a severe case of coating damage and corrosion (not from regular usage).
Anti-corrosion technology
The aluminum fins on VRV X MAX are manufactured with thicker anti-corrosion layer including an additional two-layer coating.
Previous model Previous model
CASS TestSalt Spray Test CASS Test
CASS Test
: Corrosion : Corrosion: No corrosion : No corrosion
Hot-dip zinc-aluminum-magnesium alloy coated steel sheet
Primer base coating
Powder middle coating
Top coat metallic special coating
Top clear special coating
Aluminium fin High corrosion resistance aluminium fin
Primer base coating*
Corrosion resistance coating*
4-layer coating
: Corrosion : No corrosion
* outside area only
VRV X MAX
VRV X MAX
VRV X MAX
Standard model
RXUQ6-20AYMWRXUQ12-60AM(1)YMW
Built for
Seaside
Maximize lifespan
Specifications of anti-corrosion model
The new model resists corrosion by salt, maintains performance, and greatly reduces life cycle costs.
Hot-dip zinc-aluminum-magnesium alloy-coated steel sheet + Primer base coating + Powder middle coating + Top coat metallic special coating (metallic brown) + Top clear special coating
Item
1
Aluminum fin + High corrosion resistance aluminum fin + Primer base coating (outside area only) + Corrosion resistance coating (outside area only)
5
6
Fan motor stand • Electric box • Inner casing sheet metal 7
Hot rolled sheet steel + Double rust inhibitor coating with additional touch-up paint9
Low Density Polyethylene (LDPE) coatingDischarge grille • Protection net2
Resin fan + resin casing motor Fan • Fan motor8
SWCH + zinc-nickel plating SUS410 + zinc-nickel platingFasteners3
Copper tube + Standard aluminum fin Copper tube + Anti-corrosion aluminum finHeat exchanger4
Both side resin coating Expanded both side resin coatingPrinted circuit board10
Parts Standard model
Built for seaside
Must be installed at least 300 m away from the sea in a location not in direct contact with sea wind.
Must be installed where the unit does not get into contact with seawater.
Previous model: Anti-corrosion
300 - 1,000 m 0 – 1,000 m
outdoor unit
Building
outdoor unit
Sea
Sea windSea wind
Building
Sea
•Total life cycle cost
Time
Standard model
Replacement
Corrosio
n
period
Corrosion
period
Initial cost
0 – 1000m
: Heavy Anti-corrosion
Can be installed right by the sea
Sheet metal casing Outer casing Hot dip zinc coated sheet + powder coating
Aluminum fin Aluminum fin + Hydrophilic anti-corrosion
Heat exchanger end plate Hot-dip zinc-aluminum-magnesium alloy-coated steel sheet without coating
Pressure vessel (oil separator) Hot rolled sheet steel + painting
Hot dip zinc coated sheet + corrosion resistance polyurethane coating
Hot dip zinc coated sheet + corrosion resistance polyurethane coatingGalvanized iron sheet
A third party tested the corrosion resistance (ISO 9227: salt spray tests) of the reinforced fins and casing for ISO 12944: 2018 Category C5 and confirmed them to be at very high (VH) levels.ISO 12944-6:2018 : Paints and varnishes – Corrosion protection
of steel structures by protective paint systemsCategory C5 : Industrial areas with high humidity and
aggressive atmosphere and coastal areas with high salinity
Level VH : Very high (equivalent to an expected life of 25 years *)
ISO 9227
* This number of years is not the warranty period of the product.Product life depends on installation location and operating conditions.
: Corrosion test in artificial atmospheres-Salt spray tests
25 26
VRV X Series
VR
V X
Ser
ies
Outdoor unit combinations
The outdoor unit capacity is up to 60 HP (168 kW) in increments of 2 HP.
Outdoor Unit Lineup
For connection of VRV indoor units only
VRV X Series
Notes: *1. For multiple connection, the outdoor unit multi connection piping kit (separately sold) is required.*2. Values inside brackets are based on connection of indoor units rated at maximum capacity, 200% for single outdoor units, 160% for double outdoor units, and 130%
for triple outdoor units. Refer to page 21 for notes on connection capacity of indoor units.
HP Combination
RXUQ8A
RXUQ10A
RXUQ12A
RXUQ14A
RXUQ16A
RXUQ18A
RXUQ20A
RXUQ10A + RXUQ12A
RXUQ12A × 2
RXUQ12A + RXUQ14A
RXUQ12A + RXUQ16A
RXUQ12A + RXUQ18A
RXUQ12A + RXUQ20A
RXUQ14A + RXUQ20A
100 to 260 (400)
125 to 325 (500)
150 to 390 (600)
175 to 455 (700)
200 to 520 (800)
225 to 585 (900)
250 to 650 (1,000)
275 to 715 (880)
300 to 780 (960)
325 to 845 (1,040)
350 to 910 (1,120)
375 to 975 (1,200)
400 to 1,040 (1,280)
425 to 1,105 (1,360)
Model name
RXUQ8A
RXUQ10A
RXUQ12A
RXUQ14A
RXUQ16A
RXUQ18A
RXUQ20A
RXUQ22AM
RXUQ24AM
RXUQ26AM
RXUQ28AM
RXUQ30AM
RXUQ32AM
RXUQ34AM
8
10
12
14
16
18
20
22
24
26
28
30
32
34
13 (20)
16 (25)
19 (30)
22 (35)
26 (40)
29 (45)
32 (50)
35 (44)
39 (48)
42 (52)
45 (56)
48 (60)
52 (64)
55 (64)
58 (64)
61 (64)
64 (64)
64 (64)
–
–
–
–
–
–
–
BHFP22P100
BHFP22P151
RXUQ16A + RXUQ20A 450 to 1,170 (1,440)RXUQ36AM36
Maximum number ofconnectable indoor units*2
Total capacity index of connectable indoor units*2
Outdoor unit multi connection piping kit*1
Capacityindex
200
250
300
350
400
450
500
550
600
650
700
750
800
850
900
22.4
RXUQ6A 75 to 195 (300)RXUQ6A6 9 (15)–15016.0
28.0
33.5
40.0
45.0
50.0
56.0
RXUQ6A × 3 225 to 585 (585)RXUQ18AM118 29 (29)45048.0
RXUQ6A × 2 + RXUQ8A 250 to 650 (650)RXUQ20AM120 32 (32)50054.4
RXUQ6A + RXUQ6A 150 to 390 (480)RXUQ12AM12 19 (24)30032.0
RXUQ6A + RXUQ8A 175 to 455 (560)RXUQ14AM14 22 (28)35038.4
RXUQ8A + RXUQ8A 200 to 520 (640)RXUQ16AM16 26 (32)40044.8
61.5
67.0
73.5
78.5
83.5
89.5
101
RXUQ18A + RXUQ20A 475 to 1,235 (1,520)RXUQ38AM38 950106
RXUQ20A × 2 500 to 1,300 (1,600)RXUQ40AM40 1,000112
RXUQ12A × 2 + RXUQ18A 525 to 1,365 (1,365)RXUQ42AM42 1,050117
RXUQ12A × 2 + RXUQ20A 550 to 1,430 (1,430)RXUQ44AM44 1,100123
RXUQ12A + RXUQ14A + RXUQ20A 575 to 1,495 (1,495)RXUQ46AM46 1,150130
RXUQ12A + RXUQ16A+ RXUQ20A 600 to 1,560 (1,560)RXUQ48AM48 1,200135
RXUQ12A + RXUQ18A + RXUQ20A 625 to 1,625 (1,625)RXUQ50AM50 1,250140
RXUQ12A + RXUQ20A × 2 650 to 1,690 (1,690)RXUQ52AM52 1,300146
RXUQ14A + RXUQ20A × 2 675 to 1,755 (1,755)RXUQ54AM54 1,350152
RXUQ16A + RXUQ20A × 2 700 to 1,820 (1,820)RXUQ56AM56 1,400157
RXUQ18A + RXUQ20A × 2 725 to 1,885 (1,885)RXUQ58AM58 1,450162
RXUQ20A × 3 750 to 1,950 (1,950)RXUQ60AM60 1,500168
kW
96.0
For mixed combination of VRV and residential indoor units
RXUQ8AYM(W)
RXUQ10AYM(W)
RXUQ12AYM(W)
RXUQ14AYM(W)
RXUQ16AYM(W)
RXUQ18AYM(W)
RXUQ20AYM(W)
22.4
28.0
33.5
40.0
45.0
50.0
56.0
8
10
12
14
16
18
20
200
250
300
350
400
450
500
200
250
300
350
400
450
500
100% 130%
Combination (%)*2
Total capacity index of connectable indoor units*2
260
325
390
455
520
585
650
13
16
19
22
26
29
32
Model name*1 kW HPCapacity
indexMaximum number of
connectable indoor units
100
RXUQ6AYM(W) 16.0 6 150 150 195 975
125
150
175
200
225
250
50%
BHFP22P151
BHFP22P100
RXUQ8A + RXUQ10A
RXUQ8A + RXUQ12A
225 to 585 (720)
250 to 650 (800)
RXUQ18AM
RXUQ20AM
18
20
29 (36)
32 (40)
450
500
50.4
55.9
Lineup
8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60HP 6
VRV XSERIES
Single outdoor units
Double outdoor units
Triple outdoor units
Notes: *1. Only single outdoor unit (RXUQ6-20AYM(W)) can be connected.*2. Total capacity index of connectable indoor units must be 50%–130% of the capacity index of the outdoor unit.
27 28
VRV X Series
VR
V X
Ser
ies
Floo
r St
andi
ngCe
iling
Susp
ende
dC
ateg
ory
Cei
ling
Mou
nted
Cas
sett
eC
eilin
g C
once
aled
Duc
t
3D Airflow Duct with Sensing
Round Flow Cassette with Sensing
Round Flow Cassette
Compact Multi Flow Cassette
Double Flow Cassette
Single Flow Cassette
Indoor Unit Lineup
Note: BP units are necessary for residential indoor units. Only single outdoor unit (RXUQ6-20AYM(W)) can be connected.
25 35
25 35
2.5 3.5
50 60 71
50 60 71
5.0 6.0 7.1Rated Capacity (kW)Type Model Name
Capacity Index
Slim Ceiling Concealed Duct
Wall Mounted
FDKS-EAVMB(700 mm width type)
(900/1,100 mm width type)
Enhanced range of choices
Spot Air Conditioner
FXZQ-AVM
FXPQ-AVN
VRT
FDKS-C(A)VMB VRT
FTKJ-NVMVW VRT
FTKJ-NVMVS VRT
FTKS-DVM VRT
FTKS-BVMA VRT
FTKS-FVM VRT
Residential indoor units with connection to BP unitsVRV indoor units VRT smart
VRT smart
VRT smart
VRT smart
VRT smart
VRT smart
VRT smart
VRT smart
VRT smart
VRT smart
VRT smart
VRT smart
VRT smart
VRT
VRT
VRT
VRT
VRT
VRT
VRT
VRT
VRT
VRT
VRT
VRT
VRT
VRT
Indoor units subject to VRT smart control
Indoor units subject to VRT control
FXDSQ-AVM
FXSQ-PAVE
Capacity Range
Capacity Index 20
0.8 HP
20
1.6 HP
40
2.5 HP
63
3.2 HP
80
3 HP
71
4 HP
100
5 HP
125
6 HP
140
8 HP
200
10 HP
250
2 HP1.25 HP
32
62.531.25
1 HP
25
Type Model Name
FXFSQ-AVM
Ceiling Suspended
Wall Mounted
Floor Standing
Concealed Floor Standing
4-Way Flow Ceiling Suspended
Outdoor-Air Processing Unit
FXVQ-NY1
FXVQ-NY16(high static pressure type)
Floor Standing Duct
FXDQ-SPV1
400
16 HP
500
20 HP
FXMQ-MFV1
Heat Reclaim Ventilator
Air Handling Unit
Heat Reclaim Ventilator with DX-Coil and Humidifier
VKM-GA(M)V1
VAM-GJVE
AHUR
Airflow rate 500-1000 m3/h
Airflow rate 150-2000 m3/h
Clean Room Air ConditionerFXBQ-PVE
FXBPQ-PVE
FXEQ-AV36
FXFQ-AVM
FXCQ-AVM
FXMQ-PAVE
FXMQ-PVM
FXHQ-AVM
FXUQ-AVEB
FXHQ-MAVE
FXAQ-AVM
FXLQ-MAVE
FXNQ-MAVE
FXDQ-PDVE(with drain pump)
FXDQ-PDVET(without drain pump)
FXDQ-NDVE(with drain pump)
FXDQ-NDVET(without drain pump)
(700 mm width type)
( )900/1,100 mmwidth type
6–120 HP
50
40 8071 100 125 140 200 25025 400 50050
VRV indoor units combine with residential indoor units, all in one system.
VRV indoor units only
VRV indoor units
BP unit
Residential indoor units
BP unit
Residential indoor units only
BP unit
VRV indoor unit only system
Residential indoor unit only system
Residential indoor unit and VRV indoor unit mix system
64Max.
indoor units
• If a system has indoor units subject to both VRT smart and VRT control, the system is operated under VRT control.• If a system has both outdoor-air processing air conditioners and outdoor-air processing type indoor units, VRT smart control and VRT control are disabled.
32Max.
indoor units
• BP units are necessary for residential indoor units. Only single outdoor unit (RXUQ6-20AYM(W)) can be connected.• If a system has only residential indoor units, the system is operated under VRT control.
32Max.
indoor units
• BP units are necessary for residential indoor units. Only single outdoor unit (RXUQ6-20AYM(W)) can be connected.• If a system has both residential indoor units and VRV indoor units, the system is operated under VRT control.
New lineup
Slim Duct (Standard)
Slim Duct (Compact)
Middle Static Pressure Duct
Middle-High Static Pressure Duct
High Static Pressure Duct
29 30
VRV X Series
VR
V X
Ser
ies
Outdoor Units
Specifications
268+297 297+297
11.7+11.7
MODEL RXUQ8AYM(W) RXUQ10AYM(W) RXUQ12AYM(W) RXUQ14AYM(W) RXUQ16AYM(W) RXUQ18AYM(W) RXUQ20AYM(W) RXUQ22AMYM(W) RXUQ24AMYM(W) RXUQ26AMYM(W)
Combination units
RXUQ10AYM(W) RXUQ12AYM(W) RXUQ12AYM(W)
RXUQ12AYM(W) RXUQ12AYM(W) RXUQ14AYM(W)
Power supply 3-phase 4-wire system, 380-415 V/380 V, 50/60 Hz 3-phase 4-wire system, 380-415 V/380 V, 50/60 Hz
Cooling capacityBtu/h 76,400 95,500 114,000 136,000 154,000 171,000 191,000 210,000 229,000 251,000
kW
kW
22.4 28.0 33.5 40.0 45.0 50.0 56.0 61.5 67.0 73.5
4.82 6.29 7.81 9.46 11.4 12.8 14.8 14.1 15.6 17.3
Hermetically sealed scroll type Hermetically sealed scroll type
Casing colour
Compressor
%
m3/min
kW
kW
kW
178 191 268 297 178+191178+191 191+191 191+218
Dimensions (H×W×D) mm 1,657×1,240×7651,657×930×765 (1,657×1,240×765)+(1,657×1,240×765)
Machine weight kg
Sound level dB(A) 56 58 59 6562 61 62
Operation range °CDB 10 to 49 10 to 49
RefrigerantType R-410A R-410A
Charge kg 6.6 8.3 8.5 9.7 11.79.8
RXUQ16AMYM(W)
RXUQ8AYM(W)
RXUQ8AYM(W)
153,000
44.8
9.64
6.6+6.6 6.4+6.4+6.4 6.4+6.4+6.6
59 5960 60
RXUQ14AMYM(W)
RXUQ6AYM(W)
RXUQ8AYM(W)
131,000
38.4
8.05
119+178
6.4+6.6
RXUQ12AMYM(W)
RXUQ6AYM(W)
RXUQ6AYM(W)
109,000
32.0
6.46
119+119
57 58
6.4+6.4
RXUQ18AM1YM(W) RXUQ20AM1YM(W)
RXUQ6AYM(W) RXUQ6AYM(W)
RXUQ6AYM(W) RXUQ6AYM(W)
164,000 186,000
48.0 54.4
9.69 11.3
(1,657×930×765)+(1,657×930×765)+(1,657×930×765)
RXUQ18AMYM(W) RXUQ20AMYM(W)
RXUQ8AYM(W) RXUQ8AYM(W)
RXUQ10AYM(W) RXUQ12AYM(W)
172,000 191,000
50.4 55.9
11.1 12.6
(1,657×930×765)+(1,657×1,240×765)
6.6+8.3
178+178
6.6+8.5
8-100 7-100
119+119+119 119+119+178
RXUQ6AYM(W) RXUQ8AYM(W)
8.3+8.5 8.5+8.5 8.5+9.7
Pipingconnections
Liquid mm 9.5 (Brazing) 12.7 (Brazing) 15.9 (Brazing) 19.1 (Brazing)
Gas mm
RXUQ6AYM(W)
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
— — — — — — —
— — — — — — — —
54,600
16.0
3.23
119
54
6.4
19.1 (Brazing) 22.2 (Brazing) 28.6 (Brazing) 34.9 (Brazing)
MODEL RXUQ32AMYM(W) RXUQ34AMYM(W) RXUQ36AMYM(W) RXUQ38AMYM(W) RXUQ40AMYM(W) RXUQ50AMYM(W) RXUQ52AMYM(W) RXUQ54AMYM(W) RXUQ56AMYM(W) RXUQ58AMYM(W) RXUQ60AMYM(W)
Combination units
RXUQ12AYM(W) RXUQ14AYM(W) RXUQ16AYM(W) RXUQ18AYM(W) RXUQ20AYM(W) RXUQ12AYM(W) RXUQ12AYM(W) RXUQ14AYM(W) RXUQ16AYM(W) RXUQ18AYM(W) RXUQ20AYM(W)
RXUQ20AYM(W) RXUQ20AYM(W) RXUQ20AYM(W) RXUQ20AYM(W) RXUQ20AYM(W) RXUQ18AYM(W) RXUQ20AYM(W) RXUQ20AYM(W) RXUQ20AYM(W) RXUQ20AYM(W) RXUQ20AYM(W)
RXUQ20AYM(W) RXUQ20AYM(W) RXUQ20AYM(W) RXUQ20AYM(W) RXUQ20AYM(W) RXUQ20AYM(W)
Power supply 3-phase 4-wire system, 380-415 V/380 V, 50/60 Hz 3-phase 4-wire system, 380-415 V/380 V, 50/60 Hz
Cooling capacityBtu/h 305,000 328,000 345,000 362,000 382,000 478,000 498,000 519,000 536,000 553,000 573,000
kW 89.5 96.0 101 106 112 140 146 152 157 162 168
%
22.6 24.3 26.2 27.6 29.6 35.4 37.4 39.1 41.0 42.4 44.4
Hermetically sealed scroll type Hermetically sealed scroll type
RXUQ48AMYM(W)
RXUQ12AYM(W)
RXUQ16AYM(W)
RXUQ20AYM(W)
461,000
135
34.0
RXUQ46AMYM(W)
RXUQ12AYM(W)
RXUQ14AYM(W)
RXUQ20AYM(W)
444,000
130
32.1
RXUQ44AMYM(W)
RXUQ12AYM(W)
RXUQ12AYM(W)
RXUQ20AYM(W)
420,000
123
30.4
RXUQ42AMYM(W)
RXUQ12AYM(W)
RXUQ12AYM(W)
RXUQ18AYM(W)
399,000
117
28.4
Casing colour
Power consumption
Capacity control
191+268 191+297 218+297
Dimensions (H×W×D) mm (1,657×1,240×765)+(1,657×1,240×765) (1,657×1,240×765)+(1,657×1,240×765)+(1,657×1,240×765)
Machine weight kg
191+268+297 191+297+297191+191+268 191+191+297 191+218+297 268+297+297 297+297+297218+297+297
Sound level dB(A) 66 6867 65 66 67 68 7069
Operation range °CDB 10 to 49 10 to 49
RefrigerantR-410A R-410A
Charge kg 8.5+11.7 9.7+11.7 9.8+11.7 8.5+8.5+11.7 8.5+9.7+11.7 8.5+9.8+11.7 9.8+11.7+11.79.7+11.7+11.78.5+11.7+11.7 11.7+11.7+11.7
Pipingconnections
Liquid mm 19.1 (Brazing) 19.1 (Brazing)
Gas mm 41.3 (Brazing) 34.9 (Brazing)
RXUQ28AMYM(W) RXUQ30AMYM(W)
RXUQ12AYM(W) RXUQ12AYM(W)
RXUQ16AYM(W) RXUQ18AYM(W)
268,000 285,000
78.5 83.5
19.2 20.6
191+218
6362
8.5+9.8
41.3 (Brazing)
Type
m3/min
Airflow rate
Airflow rate
Type
Motor output
Compressor
Type
Motor output
218
Power consumption
Capacity control
(1,657×930×765)+(1,657×930×765)
12.7 (Brazing) 15.9 (Brazing)
28.6 (Brazing)
23-100 19-100 13-100 12-100 11-100 9-100 7-100 11-100 10-100 9-100 8-100 7-100 6-100
2-1003-1004-1004-1005-100
(3.4×1)+(2.9×1) (3.4×1)+(3.9×1) (3.7×1)+(4.3×1) (4.9×1)+(4.2×1) (2.4×1)+(2.4×1) (2.4×1)+(3.4×1) (3.4×1)+(3.4×1) (3.4×1)+(4.2×1) (3.4×1)+(5.2×1) (4.2×1)+(5.2×1) (5.2×1)+(5.2×1)(2.4×1)+(2.4×1)+(2.4×1) (2.4×1)+(2.4×1)+(3.4×1) (5.2×1)+(3.4×1)+(2.9×1)2.4×1 3.4×1 4.2×1 5.2×1
(5.2×1)+(3.4×1)+(3.9×1) (5.2×1)+(3.7×1)+(4.3×1) (5.2×1)+(4.9×1)+(4.2×1) (3.4×1)+(2.9×1)+(4.9×1)+(4.2×1)
(3.4×1)+(3.9×1)+(4.9×1)+(4.2×1)
(3.7×1)+(4.3×1)+(4.9×1)+(4.2×1)
(4.9×1)+(4.2×1)+(4.9×1)+(4.2×1)
(5.2×1)+(5.2×1)+(3.7×1)+(4.3×1)
(5.2×1)+(5.2×1)+(4.9×1)+(4.2×1)
(5.2×1)+(3.4×1)+(2.9×1)+(4.9×1)+(4.2×1)
(5.2×1)+(3.4×1)+(3.9×1)+(4.9×1)+(4.2×1)
(5.2×1)+(3.7×1)+(4.3×1)+(4.9×1)+(4.2×1)
(5.2×1)+(4.9×1)+(4.2×1)+(4.9×1)+(4.2×1)
(3.4×1)+(2.9×1)+(4.9×1)+(4.2×1)+(4.9×1)+(4.2×1)
(3.4×1)+(3.9×1)+(4.9×1)+(4.2×1)+(4.9×1)+(4.2×1)
(3.7×1)+(4.3×1)+(4.9×1)+(4.2×1)+(4.9×1)+(4.2×1)
(4.9×1)+(4.2×1)+(4.9×1)+(4.2×1)+(4.9×1)+(4.2×1)
Ivory white (5Y7.5/1) (Metallic brown )
Ivory white (5Y7.5/1) (Metallic brown ) Ivory white (5Y7.5/1) (Metallic brown )
185 (195 )
215+275 (235+295 ) 215+291 (235+316 ) 275+291 (295+316 ) 291+291 (316+316 ) 215+215+291 (235+235+316 ) 215+275+291 (235+295+316 ) 215+291+291 (235+316+316 ) 275+291+291 (295+316+316 ) 291+291+291 (316+316+316 )
215 (235 ) 275 (295 ) 291 (316 ) 185+185 (195+195 ) 185+215 (195+235 ) 185+185+185 (195+195+195 ) 215+215 (235+235 ) 215+275 (235+295 )
Ivory white (5Y7.5/1) (Metallic brown )
1
1 1 1 1 1
1 1 1
1
1 1
1
1 1 1 1
1
1 1 1 1
Notes: Specifications are based on the following conditions;• Cooling: Indoor temp.: 27°CDB, 19°CWB, Outdoor temp.: 35°CDB, Equivalent piping length: 7.5 m, Level difference: 0 m.• Sound level: Anechoic chamber conversion value, measured at a point 1 m in front of the unit at a height of 1.5 m.
During actual operation, these values are normally somewhat higher as a result of ambient conditions and oil recovery mode.When there is concern for noise to the surrounding area such as residences, we recommend investigating the installation location and taking soundproofing measures.
Note: 1. Models with (W) are the outdoor units with anti-corrosion specifications. For details, refer to pages 23 - 24 for more information.
VRV X Series
Cooling Only
VR
V A
Ser
ies
VRV A Series
31 32
Daikin’s VRV A series raised the standard of energy efficiency.
Greater energy savings during low-load operation
Higher Energy Efficiency Ratio (EER) for 10 HP
The key to innovativeenergy savings
14%Lower
Annual powerconsumption
10% 20% 30% 40% 50% 60% 70% 80% 90% 100%0
Load factor for the rated capacity
Op
erat
ion
per
iod Load factor of 50% or less
accounts for 80% of annual
operation period.
* Simulation conditions:• Location: Bangkok, Thailand
• System: Outdoor unit (10 HP) x 1
Indoor unit (2 HP, Round Flow with Sensing type) x 5
• Operation time: 8:00-20:00 5 days/week
• Outdoor units: New model: RXQ10A (VRV A series)
Conventional model: RXQ10T (VRV IV)
* Cooling operation conditions: • Indoor temperature of 27ºCDB, 19ºCWB, and outdoor temperature of 35ºCDB.
0
3
4
5
6
7
8
9
30% 40% 90% 100%50% 60% 70% 80% Load
Co
olin
g O
per
atio
n E
ER 8.167.78 7.57
6.775.92
5.234.68
4.09
Conventional model New model
Increased efficiencyduring low-load operation.
* Data source• Number of properties connected to the Air
Conditioning Network Service System: 42 projects
• Number of outdoor unit systems: 535 systems
• Data collection period: 8:00-18:00, weekdays
(excluding public holidays), from July 2015 to June
2016 in office buildings in Singapore.
Saves Space and Delivers Excellent Performance
Single Outdoor units
RXQ6-20AYM(W)
Double Outdoor units
RXQ18-40AMYM(W)
Triple Outdoor units
RXQ42-60AMYM(W)
*(W): Heavy anti-corrosion model
6HP–60HP
Cooling Only
(16 kW) (168 kW)
33 34
VR
V A
Ser
ies
VRV A Series
Advanced Technologies
Back pressure control mechanism
Advanced technologies for greater energy savings
* For the classification of indoor units (VRT smart control and VRT control), refer to the indoor unit lineup.
Calculate• Indoor airflow rate• Target refrigerant temperature
Determine the target refrigerant temperature
Room temperature and set temperature
Compressor speed control
Optimally supply only for the needed capacity of indoor units
• Reduces compressor load and minimizes operation loss so it is energy saving• Controls capacity according to load to ensure a constant room temperature for greater comfort.
Coordinated control
New intermediate pressure mechanism
The pressure on the orbiting scroll is optimised according to operating conditions. As a result, the orbiting scroll has been stabilised to increase efficiency during low-load operation.
Intermediate pressure adjustment port
Refrigerant leakage is minimized during low-load operation
By uniting advanced software and hardware technologies for greater energy savings during actual operation and combining the technologies of VRV, VRT and VAV, we have attained both energy savings and comfortable air conditioning.
Co
mp
ress
or
effi
cien
cy
New compressor
Conventional compressor
Load factor* Graph shown above is for illustration purposes only.
The back pressure control mecha-nism increases the efficiency during low-load operation.
• Refrigerant leakage is minimized by a back pressure control mechanism that increases the efficiency during low-load operation.
Fully Automatic Energy-saving Refrigerant Control
VRT Smart Control VRT Smart Control Function movie
New ScrollCompressormovie
Software technology New Scroll CompressorHardware technology
* The new mechanism is used in RXQ10, 12, 14 and 20A models.
35 36
VR
V A
Ser
ies
VRV A Series
I-demand functionPeak power cut-off can be accomplished according to each user situation.
* Set on the PCB of the outdoor unit.
Standby power needed for preheating refrigerator oil was reduced up to 82.7% to save energy when the air conditioner is stopped.
Advanced Technologies
Advanced oil temperature control
* Operation calculation conditions: VRV A series 14 HP Location: Singapore Operation time: 08:00–18:00 on weekdays
Extended operation range up to 49°C
Contribute to optimised operation efficiency, higher quality and easier installation.
This function prevents a capacity shortage or energy loss due to excessive or insufficient refrigerant.
The automatic refrigerant charge function automates the charging of the proper refrigerant amount and the closing of shut-off valves by simply pressing a switch after pre-charging.
• Automatic completion by proper refrigerant amount• Monitoring refrigerant charging is unnecessary• No recalculation of charge amounts due to minor design changes locally
Automatic refrigerant charge function
Optimised operation efficiency
Higher quality and easier installation
Calculation of necessary refrigerant amount from design drawing
1 Pre-charge of refrigerant2 Start of automatic refrigerant charge operation
3
Automatic Refrigerant Charge
R-410A
* There are conditions in the range of ambient temperature in which the automatic refrigerant charge can be used. Refer to the installation manual for details. * The refrigerant amount that can be automatically charged may differ from the additional refrigerant amount that is provided from calculations, but there are no problems in performance and quality.
Automatic RefrigerantCharge Functionmovie
49°C20 30 4010
VRV A Series
Cooling Outdoor temperature (°CDB)
Can be set in
5% increments
Total of 11 levels
Pow
er c
onsu
mpt
ion
Less
Mor
e
* When set to 70% demand
100%
70%
50%40%
0%Time
Optimised Operation
Efficiency Cooling capacity
Optimal refrigerantamount
Refrigerant charge amount
Insufficientrefrigerant charge
Excessiverefrigerant charge
82.7%Reduction
Note: When outdoor temperature falls below 10°C, the thermostat shuts OFF, the outdoor unit stops, and operation switches from cooling to fan operation.
High external static pressureVRV A series outdoor unit has been achieved high external static pressure up to 78.4 Pa.
37 38
VR
V A
Ser
ies
VRV A Series
Comfort & ReliabilityComfort
Reliable and stable technologyHigh reliability at high ambient temperature
PCB
Power Module
RefrigerantRefrigerant JacketHeat
Refrigerant
Using refrigerant to cool the inverter power module helps minimise the size of the electronic components, and this results in reduction of airflow resistance and high efficiency of the heat exchanger.
Control board failure ratio at stable operation is reduced.
Nighttime quiet operation function
*1. Initial setting is 8 hours. Can be selected from 6, 8 and 10 hours.*2. Initial setting is 9 hours. Can be selected from 8, 9 and 10 hours.*3. In case of 10 HP outdoor unit.
Peak in the outdoortemperature
8 hrs*1 10 hrs*2
8:00 12:00 16:00 20:00 0:00 4:00 8:00
50%
100%
Night mode ENDSNight mode STARTS
Night quiet mode
Min. 40 dB(A)*3
40 dB(A)
57 dB(A)
Load %
Operating sound dB(A)The nighttime quiet operation function automatically suppresses the nighttime operating sound by reducing operation capacity to maintain the quiet environ-ment of the neighborhood. Three selectable modes are available depending on the required level.
Notes: • This function is available in setting at site.• The operating sound in quiet operation mode is the actual
value measured by our company. • The relationship of outdoor temperature (load) and time
shown above is just an example.
This enables
• Suitability for high ambient temperatures
• Miniaturization of electronic components
Area CArea BArea A
Ease of maintenance
Can provide maintenance feature* without shutting down the whole VRV system.
Function of information display by luminous digital tube
VRV A series utilises a bright 7-segment digital display to convey operational status and facilitate simple installation and after-sales service.
SMT* packaging technology
•Improves the anti-clutter performance.•Protects your computer boards from the adverse effects of sandy climates and humid weather.
* SMT: Surface mounted technology
Computer control board surface adopting SMT packaging technology
* For single outdoor unit system RXQ16-20AYM models. On-site settings are required using the PCB of the outdoor unit.
Malfunction
Malfunction
Emergencyoperation
Emergencyoperation
Automatic sequencing operation
Stage 3
Priority
Automaticsequencing
132
Stage 2
Priority
Automaticsequencing
213
Stage 1
Priority 321
* Field setting is required. This feature does not apply to residential indoor unit connection. For more information, please contact Daikin sales office.
Outer rotor DC motor (ODM)
Only Daikin has adapted an ODM with the feature of stable rotation and volumetric efficiency.
UNIQUEODM(Outer Type)Conventional Motor(Inner Type)
F
Rotor
F
RotorHIGH TORQUE
with low energy
MORE efficient
7-segment digital display
Displays system operation information directly
Double backup operation functions
SMT packaging material
Computer control board
Unit backup operation function Compressor backup operation function
39 40
VR
V A
Ser
ies
VRV A Series
The long piping length provides more design flexibility, which can match even large-sized buildings.
Flexible System Design
Long piping length
Connection capacity at maximum is 200%.
Connection ratio
Installation for mixed combination of VRV and residential indoor units
More options for installation location
Installation for VRV indoor units only
Max. 90 m
Between the first indoor branch and the farthest indoor unit
90 m
Max. level difference between the outdoor units and the indoor units
Note: The above is just a schematic diagram.
Max. equivalent piping length
190 m
165 m
Max. actual piping length
1000 mMax. total piping length
Conditions of VRV indoor unit connection capacity
Single outdoor units
Double outdoor units
Triple outdoor units
Applicable VRV indoor units
200%
Other VRV indoorunit models*1
200%160%130%
Connection ratio =Total capacity index of the indoor units
Capacity index of the outdoor units
* 1. No special requirements up to 40 m. The maximum actual piping length can be 90 m, depending on conditions. The VRV A series is easy to extend to 90 m by lessening the conditions from conventional VRV IV models. Be sure to refer to the Engineering Data Book for details of these conditions and requirements.
* 2. When level differences are 50 m or more, the diameter of the main liquid piping size must be increased. If the outdoor unit is above the indoor unit, a dedicated setting on the outdoor unit is required. Refer to the Engineering Data Book and contact your local dealer for more information.
Maximum allowable level difference
Maximum allowable piping length
Between the outdoor units and the indoor units
Between the indoor units
Between the outdoor units (Multiple use)
Between the first indoor branch and the farthest indoor unit
Between the outdoor branch and the last outdoor unit (Equivalent)
Total piping length
Actual piping length (Equivalent)
30 m
5 m
165 m (190 m)
1000 m
10 m (13 m)
90 m*2
90 m*1
*1 For the FXF(S)Q25, FXPQ and FXVQ models, maximum connection ratio is 130% for the entire range of outdoor units.
Note: If the operational capacity of indoor units is more than 130%, low airflow operation is enforced in all the indoor units.
*Refer to page 43 for outdoor unit combination details.
50%–200%
Connection ratio
*2
*1
Max. 5 m
Between the outdoor unitsMax. 13 m
Between the outdoor branchand the last outdoor unit
Max. level difference between the indoor units
30 m
FXB(P)QFXDQ
FXSQ
FXMQ-PA
FXAQ
Max. total piping length 250 m
Max. equivalent piping length
120 m
Max. actual piping length
100 m
Between the first indoor branch and the farthest VRV indoor unit
Max. level difference between the indoor units
15 m
15 m Max. level difference between the outdoor unit and the indoor unit
50 m
5 m
Note: The above is just a schematic diagram.
BP unit
RA
RA
RA
RA
VRV
BP unit
Max. 15 m
Between BP unit and indoor unitMax. level difference between the
outdoor unit and the BP units
40 m
Max. level difference between BP unit
Max. level difference between the BP unit and the indoor unit
VRV: VRV indoor unit RA: Residential indoor unit
Max. 50 m
Maximum allowablepiping length
Minimum allowable piping length
Maximum allowablelevel difference
Between the outdoor unitand the indoor unit
Between BP unit and indoor unit
Between the indoor units
Between BP units
Between the first indoor branch and the farthest BP unit or between the first indoor branch and the farthest VRV indoor unit
Total piping length
Actual piping length (Equivalent)
Between outdoor unit and the first indoor branch
15 m
15 m
100 m (120 m)
250 m
2 m–15 m
2 m–8 m
50 m*1
5 m
50 mIf the outdoor unit is above.
If the outdoor unit is below.
If indoor unit capacity index < 60.
If indoor unit capacity index is 60 and 71.
40 m
40 m
*1. If the piping length between the first indoor branch and BP unit or VRV indoor unit is over 20 m, it is necessary to increase the gas and liquid piping size between the first indoor branch and BP unit or VRV indoor unit. If the piping diameter of the sized up piping exceeds the diameter of the piping before the first indoor branch kit, then the latter also requires a liquid piping and gas piping size up. Please refer to Engineering Data Book for details.
*When a mixed combination of VRV and residential indoor units is connected or when only residential indoor units are connected, connection ratio must be 50% to 130%. Refer to page 43 for outdoor unit combination details. Between the outdoor unit and the BP unit
5 mBetween the BP unit and the indoor unit
*1
When a mixed combination of VRV and residential indoor units is connected
41 42
VR
V A
Ser
ies
VRV A Series
Achieves both anti-corrosion and high efficiency
High performance technology
New aluminum fins are 21% thicker to maintain performance.
Automated fin coating line
To prevent differences in coating thickness caused by manual application, the additional fin coatings are performed on the latest automated assembly line, maintaining high precision and quality.
Anti-corrosion Technology
Outer casing
Heat exchanger (Fin)
Maximize anti-corrosion and performance
Heavy anti-corrosion model
Multi coating for extreme durability
The hot-dip Zinc-Aluminum-Magnesium alloy coated sheet is optimised for even greater durability with an additional four-layer coating combination.
Anti-corrosion verification by accelerated test
Although the previous anti-corrosion model is rusted, the VRV A MAX outer casing shows no signs of corrosion in either test.
* The cross cut was made in order to simulate a severe case of coating damage and corrosion (not from regular usage).
Anti-corrosion technology
The aluminum fins on VRV A MAX are manufactured with thicker anti-corrosion layer including an additional two-layer coating.
Previous model Previous model
CASS TestSalt Spray Test CASS Test
CASS Test
: Corrosion : Corrosion: No corrosion : No corrosion
Hot-dip zinc-aluminum-magnesium alloy coated steel sheet
Primer base coating
Powder middle coating
Top coat metallic special coating
Top clear special coating
Aluminium fin High corrosion resistance aluminium fin
Primer base coating*
Corrosion resistance coating*
4-layer coating
: Corrosion : No corrosion
* outside area only
VRV A MAX
VRV A MAX
VRV A MAX
Standard model
RXQ6-20AYMWRXQ18-60AMYMW
Built for
Seaside
Maximize lifespan
Specifications of anti-corrosion model
The new model resists corrosion by salt, maintains performance, and greatly reduces life cycle costs.
Hot-dip zinc-aluminum-magnesium alloy-coated steel sheet + Primer base coating + Powder middle coating + Top coat metallic special coating (metallic brown) + Top clear special coating
Item
1
Aluminum fin + High corrosion resistance aluminum fin + Primer base coating (outside area only) + Corrosion resistance coating (outside area only)
5
6
Fan motor stand • Electric box • Inner casing sheet metal 7
Hot rolled sheet steel + Double rust inhibitor coating with additional touch-up paint9
Low Density Polyethylene (LDPE) coatingDischarge grille • Protection net2
Resin fan + resin casing motor Fan • Fan motor8
SWCH + zinc-nickel plating SUS410 + zinc-nickel platingFasteners3
Copper tube + Standard aluminum fin Copper tube + Anti-corrosion aluminum finHeat exchanger4
Both side resin coating Expanded both side resin coatingPrinted circuit board10
Parts Standard model
•Total life cycle cost
Time
Standard model
Replacement
Corrosio
n
period
Corrosion
period
Initial cost
Built for seaside
Must be installed at least 300 m away from the sea in a location not in direct contact with sea wind.
Must be installed where the unit does not get into contact with seawater.
300 - 1,000 m 0 – 1,000 m
outdoor unit
Building
outdoor unit
Sea
Sea windSea wind
Building
Sea0 – 1000m
Can be installed right by the sea
Previous model: Anti-corrosion : Heavy Anti-corrosion
Sheet metal casing Outer casing Hot dip zinc coated sheet + powder coating
Aluminum fin Aluminum fin + Hydrophilic anti-corrosion
Heat exchanger end plate Hot-dip zinc-aluminum-magnesium alloy-coated steel sheet without coating
Pressure vessel (oil separator) Hot rolled sheet steel + painting
Hot dip zinc coated sheet + corrosion resistance polyurethane coating
Hot dip zinc coated sheet + corrosion resistance polyurethane coatingGalvanized iron sheet
A third party tested the corrosion resistance (ISO 9227: salt spray tests) of the reinforced fins and casing for ISO 12944: 2018 Category C5 and confirmed them to be at very high (VH) levels.ISO 12944-6:2018 : Paints and varnishes – Corrosion protection
of steel structures by protective paint systemsCategory C5 : Industrial areas with high humidity and
aggressive atmosphere and coastal areas with high salinity
Level VH : Very high (equivalent to an expected life of 25 years *)
ISO 9227
* This number of years is not the warranty period of the product.Product life depends on installation location and operating conditions.
: Corrosion test in artificial atmospheres-Salt spray tests
43 44
VR
V A
Ser
ies
VRV A Series
Outdoor Unit Combinations
The outdoor unit capacity is up to 60 HP (168 kW) in increments of 2 HP.
Outdoor Unit Lineup
For connection of VRV indoor units only
VRV A Series
Notes: *1. For multiple connection, the outdoor unit multi connection piping kit (separately sold) is required.*2. Values inside brackets are based on connection of indoor units rated at maximum capacity, 200% for single outdoor units, 160% for double outdoor units,
and 130% for triple outdoor units. Refer to page 39 for notes on connection capacity of indoor units.
For mixed combination of VRV and residential indoor unitsLineup
8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60HP 6
VRV ASERIES
Single outdoor units
Double outdoor units
Triple outdoor units
Notes: *1. Only single outdoor unit (RXQ6-20AYM(W)) can be connected.*2. Total capacity index of connectable indoor units must be 50%–130% of the capacity index of the outdoor unit.
RXQ6AYM(W)
RXQ8AYM(W)
RXQ10AYM(W)
RXQ12AYM(W)
RXQ14AYM(W)
RXQ16AYM(W)
RXQ18AYM(W)
RXQ20AYM(W)
16.0
22.4
28.0
33.5
40.0
45.0
50.0
56.0
6
8
10
12
14
16
18
20
150
200
250
300
350
400
450
500
150
200
250
300
350
400
450
500
195
260
325
390
455
520
585
650
100% 130%
Combination (%)*2
Total capacity index of connectable indoor units*2
9
13
16
19
22
26
29
32
Model name*1 kW HPCapacity
indexMaximum number of
connectable indoor units
75
100
125
150
175
200
225
250
50%
HP Combination
RXQ8A
RXQ10A
RXQ12A
RXQ14A
RXQ16A
RXQ18A
RXQ20A
RXQ8A + RXQ10A
RXQ8A + RXQ12A
RXQ10A + RXQ12A
RXQ12A × 2
RXQ12A + RXQ14A
RXQ12A + RXQ16A
RXQ12A + RXQ18A
RXQ14A + RXQ18A
RXQ16A + RXQ18A
100 to 260 (400)
125 to 325 (500)
150 to 390 (600)
175 to 455 (700)
200 to 520 (800)
225 to 585 (900)
250 to 650 (1,000)
225 to 585 (720)
250 to 650 (800)
275 to 715 (880)
300 to 780 (960)
325 to 845 (1,040)
350 to 910 (1,120)
375 to 975 (1,200)
400 to 1,040 (1,280)
425 to 1,105 (1,360)
Model name
RXQ8A
RXQ10A
RXQ12A
RXQ14A
RXQ16A
RXQ18A
RXQ20A
RXQ18AM
RXQ20AM
RXQ22AM
RXQ24AM
RXQ26AM
RXQ28AM
RXQ30AM
RXQ32AM
RXQ34AM
8
10
12
14
16
18
20
18
20
22
24
26
28
30
32
34
13 (20)
16 (25)
19 (30)
22 (35)
26 (40)
29 (45)
32 (50)
29 (36)
32 (40)
35 (44)
39 (48)
42 (52)
45 (56)
48 (60)
52 (64)
55 (64)
58 (64)
61 (64)
64 (64)
–
–
–
–
–
–
–
BHFP22P100
BHFP22P151
RXQ18A × 2 450 to 1,170 (1,440)RXQ36AM36
Maximum number ofconnectable indoor units*2
Total capacity index of connectable indoor units*2
Outdoor unit multi connection piping kit*1
Capacityindex
200
250
300
350
400
450
500
450
500
550
600
650
700
750
800
850
900
22.4
RXQ6A 75 to 195 (300)RXQ6A6 9 (15)–15016.0
28.0
33.5
40.0
45.0
50.0
56.0
50.4
55.9
61.5
67.0
73.5
78.5
83.5
90.0
100
RXQ18A + RXQ20A 475 to 1,235 (1,520)RXQ38AM38 950106
RXQ20A × 2 500 to 1,300 (1,600)RXQ40AM40 1,000112
RXQ12A × 2 + RXQ18A 525 to 1,365 (1,365)RXQ42AM42 1,050117
RXQ12A × 2 + RXQ20A 550 to 1,430 (1,430)RXQ44AM44 1,100123
RXQ14A × 2 + RXQ18A 575 to 1,495 (1,495)RXQ46AM46 1,150130
RXQ14A + RXQ16A + RXQ18A 600 to 1,560 (1,560)RXQ48AM48 1,200135
RXQ14A + RXQ18A × 2 625 to 1,625 (1,625)RXQ50AM50 1,250140
RXQ16A + RXQ18A × 2 650 to 1,690 (1,690)RXQ52AM52 1,300145
RXQ18A × 3 675 to 1,755 (1,755)RXQ54AM54 1,350150
RXQ18A × 2 + RXQ20A 700 to 1,820 (1,820)RXQ56AM56 1,400156
RXQ18A + RXQ20A × 2 725 to 1,885 (1,885)RXQ58AM58 1,450162
RXQ20A × 3 750 to 1,950 (1,950)RXQ60AM60 1,500168
kW
95.0
45 46
VR
V A
Ser
ies
VRV A SeriesFl
oor
Stan
ding
Ceilin
g Su
spen
ded
Cat
egor
yC
eilin
g M
ount
ed C
asse
tte
Cei
ling
Con
ceal
ed D
uct
Indoor Unit Lineup
Note: BP units are necessary for residential indoor units. Only single outdoor unit (RXQ6-20AYM(W)) can be connected.
25 35
25 35
2.5 3.5
50 60 71
50 60 71
5.0 6.0 7.1Rated Capacity (kW)Type Model Name
Capacity Index
Slim CeilingConcealed Duct
Wall Mounted
FDKS-EAVMB(700 mm width type)
(900/1,100 mm width type)
Enhanced range of choices
Spot Air Conditioner
FXZQ-AVM
FXPQ-AVN
VRT
FDKS-C(A)VMB VRT
FTKJ-NVMVW VRT
FTKJ-NVMVS VRT
FTKS-DVM VRT
FTKS-BVMA VRT
FTKS-FVM VRT
Residential indoor units with connection to BP unitsVRV indoor units VRT smart
VRT smart
VRT smart
VRT smart
VRT smart
VRT smart
VRT smart
VRT smart
VRT smart
VRT smart
VRT smart
VRT smart
VRT smart
VRT
VRT
VRT
VRT
VRT
VRT
VRT
VRT
VRT
VRT
VRT
VRT
VRT
VRT
Indoor units subject to VRT smart control
Indoor units subject to VRT control
FXDSQ-AVM
FXSQ-PAVE
Capacity Range
Capacity Index 20
0.8 HP
20
1.6 HP
40
2.5 HP
63
3.2 HP
80
3 HP
71
4 HP
100
5 HP
125
6 HP
140
8 HP
200
10 HP
250
2 HP1.25 HP
32
62.531.25
1 HP
25
Type Model Name
FXFSQ-AVM
Ceiling Suspended
Wall Mounted
Floor Standing
Concealed Floor Standing
4-Way Flow Ceiling Suspended
Outdoor-Air Processing Unit
FXVQ-NY1
FXVQ-NY16(high static pressure type)
Floor Standing Duct
FXDQ-SPV1
400
16 HP
500
20 HP
FXMQ-MFV1
Heat Reclaim Ventilator
Air Handling Unit
Heat Reclaim Ventilator with DX-Coil and Humidifier
VKM-GA(M)V1
VAM-GJVE
AHUR
Airflow rate 500-1000 m3/h
Airflow rate 150-2000 m3/h
Clean Room Air ConditionerFXBQ-PVE
FXBPQ-PVE
FXEQ-AV36
FXFQ-AVM
FXCQ-AVM
FXMQ-PAVE
FXMQ-PVM
FXHQ-AVM
FXUQ-AVEB
FXHQ-MAVE
FXAQ-AVM
FXLQ-MAVE
FXNQ-MAVE
FXDQ-PDVE(with drain pump)
FXDQ-PDVET(without drain pump)
FXDQ-NDVE(with drain pump)
FXDQ-NDVET(without drain pump)
(700 mm width type)
( )900/1,100 mmwidth type
6–120 HP
50
40 8071 100 125 140 200 25025 400 50050
VRV indoor units combine with residential indoor units, all in one system.
VRV indoor units only
VRV indoor units
BP unit
Residential indoor units
BP unit
Residential indoor units only
BP unit
VRV indoor unit only system
Residential indoor unit only system
Residential indoor unit and VRV indoor unit mix system
64Max.
indoor units
• If a system has indoor units subject to both VRT smart and VRT control, the system is operated under VRT control.• If a system has both outdoor-air processing air conditioners and outdoor-air processing type indoor units, VRT smart control and VRT control are disabled.
32Max.
indoor units
• BP units are necessary for residential indoor units. Only single outdoor unit (RXQ6-20AYM(W)) can be connected.• If a system has only residential indoor units, the system is operated under VRT control.
32Max.
indoor units
• BP units are necessary for residential indoor units. Only single outdoor unit (RXQ6-20AYM(W)) can be connected.• If a system has both residential indoor units and VRV indoor units, the system is operated under VRT control.
New lineup
3D Airflow Duct with Sensing
Middle Static Pressure Duct
Round Flow Cassette with Sensing
Round Flow Cassette
Compact Multi Flow Cassette
Double Flow Cassette
Single Flow Cassette
Slim Duct (Standard)
Middle-High Static Pressure Duct
High Static Pressure Duct
Slim Duct (Compact)
47 48
VR
V A
Ser
ies
VRV A Series
Outdoor Units
Specifications
Airflow rate
MODEL RXQ6AYM(W) RXQ8AYM(W) RXQ10AYM(W) RXQ12AYM(W) RXQ14AYM(W) RXQ16AYM(W) RXQ18AYM(W) RXQ20AYM(W) RXQ18AMYM(W) RXQ20AMYM(W) RXQ22AMYM(W) RXQ24AMYM(W) RXQ26AMYM(W) RXQ28AMYM(W) RXQ30AMYM(W)
Combination units— — — — — — — — RXQ8AYM(W) RXQ8AYM(W) RXQ10AYM(W) RXQ12AYM(W) RXQ12AYM(W) RXQ12AYM(W) RXQ12AYM(W)
— — — — — — — — RXQ10AYM(W) RXQ12AYM(W) RXQ12AYM(W) RXQ12AYM(W) RXQ14AYM(W) RXQ16AYM(W) RXQ18AYM(W)
Power supply 3-phase 4-wire system, 380-415 V/380 V, 50/60 Hz 3-phase 4-wire system, 380-415 V/380 V, 50/60 Hz
Cooling capacityBtu/h 54,600 76,400 95,500 114,000 136,000 154,000 171,000 191,000 172,000 191,000 210,000 229,000 251,000 268,000 285,000
kW 16.0 22.4 28.0 33.5 40.0 45.0 50.0 56.0 50.4 55.9 61.5 67.0 73.5 78.5 83.5
kW
%
kW
3.38 5.17 6.84 8.70 10.7 12.9 15.3
25-100
2.3×1
20-100 13-100 12-100 11-100 10-100 10-100
3.4×1 4.5×1 5.6×1 6.4×1 (3.5×1)+(3.5×1) (4.0×1)+(4.0×1)
17.7 12.0 13.9 15.5 17.4 19.4 21.6 24.0
7-100 7-100 7-100 6-100 6-100 6-100 5-100 5-100
(3.8×1)+(6.3×1) (3.4×1)+(4.5×1) (3.4×1)+(5.6×1) (4.5×1)+(5.6×1) (5.6×1)+(5.6×1) (5.6×1)+(6.4×1)(5.6×1)+(3.5×1)+(3.5×1)
(5.6×1)+(4.0×1)+(4.0×1)
Casing colour
Compressor
Power consumption
Capacity control
m3/min 119 191 257 297 178+178 178+191 191+191 191+257
Dimensions (H×W×D ) mm 1,657×930×765 1,657×1,240×765 1,657×1,240×765 (1,657×930×765)+(1,657×930×765) (1,657×930×765)+(1,657×1,240×765)
Machine weight kg 175 (180 ) 185 (195 ) 215 (235 ) 260 (280 ) 285 (310 ) 175+185 (180+195 ) 185+185 (195+195 ) 185+215 (195+235 ) 185+260 (195+280 )
Sound level dB(A) 56 57 59 60 61 65 60 61 62 63
Operation range °CDB 10 to 49 10 to 49
RefrigerantType
Type
Motor output
R-410A R-410A
Charge kg 5.9 6.7 6.8 7.4 8.2 8.4 11.8 5.9+6.7 5.9+6.8 6.7+6.8 6.8+6.8 6.8+7.4 6.8+8.2 6.8+8.4
Piping connections
Liquid mm 9.5 (Brazing) 12.7 (Brazing) 15.9 (Brazing) 15.9 (Brazing) 19.1 (Brazing)
Gas mm 19.1 (Brazing) 22.2 (Brazing) 28.6 (Brazing) 28.6 (Brazing) 34.9 (Brazing)
Ivory white (5Y7.5/1) (Metallic brown )
Hermetically sealed scroll type
Ivory white (5Y7.5/1) (Metallic brown )
Hermetically sealed scroll type
178
MODEL RXQ32AMYM(W) RXQ34AMYM(W) RXQ36AMYM(W) RXQ38AMYM(W) RXQ40AMYM(W) RXQ42AMYM(W) RXQ44AMYM(W) RXQ46AMYM(W) RXQ48AMYM(W) RXQ50AMYM(W) RXQ52AMYM(W) RXQ54AMYM(W) RXQ56AMYM(W) RXQ58AMYM(W) RXQ60AMYM(W)
Combination units
RXQ14AYM(W) RXQ16AYM(W) RXQ18AYM(W) RXQ18AYM(W) RXQ20AYM(W) RXQ12AYM(W) RXQ12AYM(W) RXQ14AYM(W) RXQ14AYM(W) RXQ14AYM(W) RXQ16AYM(W) RXQ18AYM(W) RXQ18AYM(W) RXQ18AYM(W) RXQ20AYM(W)
RXQ18AYM(W) RXQ18AYM(W) RXQ18AYM(W) RXQ20AYM(W) RXQ20AYM(W) RXQ12AYM(W) RXQ12AYM(W) RXQ14AYM(W) RXQ16AYM(W) RXQ18AYM(W) RXQ18AYM(W) RXQ18AYM(W) RXQ18AYM(W) RXQ20AYM(W) RXQ20AYM(W)
— — — — — RXQ18AYM(W) RXQ20AYM(W) RXQ18AYM(W) RXQ18AYM(W) RXQ18AYM(W) RXQ18AYM(W) RXQ18AYM(W) RXQ20AYM(W) RXQ20AYM(W) RXQ20AYM(W)
Power supply 3-phase 4-wire system, 380-415 V/380 V, 50/60 Hz 3-phase 4-wire system, 380-415 V/380 V, 50/60 Hz
Cooling capacityBtu/h 307,000 324,000 341,000 362,000 382,000 399,000 420,000 444,000 461,000 478,000 495,000 512,000 532,000 553,000 573,000
kW 90.0 95.0 100 106 112 117 123 130 135 140 145 150 156 162 168
kW
%
26.0 28.2 30.6 33.0 35.4 32.7 35.1
5-100 5-100 5-100 4-100 3-100 4-100 3-100
36.7 38.9 41.3
3-100 3-100 3-100
43.5 45.9 48.3 50.7 53.1
3-100 3-100 3-100 2-100 2-100
Casing colour
Power consumption
Capacity control
257+257 297+297257+297 191+191+257 191+191+297 257+257+257 257+257+297 257+297+297 297+297+297
Dimensions (H×W×D) mm (1,657×1,240×765)+(1,657×1,240×765)(1,657×930×765)+(1,657×930×765)+
(1,657×1,240×765)(1,657×1,240×765)+(1,657×1,240×765)+(1,657×1,240×765)
Machine weight kg 215+260 (235+280 ) 260+260 (280+280 ) 260+285 (280+310 ) 285+285 (310+310 ) 185+185+260 (195+195+280 ) 185+185+285 (195+195+310 ) 215+215+260 (235+235+280 ) 215+260+260 (235+280+280 ) 260+260+260 (280+280+280 ) 260+260+285 (280+280+310 ) 260+285+285 (280+310+310 ) 285+285+285 (310+310+310 )
Sound level dB(A) 64 66 68 65 67 65 66 68 69 70
Operation range °CDB 10 to 49 10 to 49
RefrigerantType R-410A R-410A
Charge kg 7.4+8.4 8.2+8.4 8.4+8.4 8.4+11.8 11.8+11.8 6.8+6.8+8.4 6.8+6.8+11.8 7.4+7.4+8.4 7.4+8.2+8.4 7.4+8.4+8.4 8.2+8.4+8.4 8.4+8.4+8.4 8.4+8.4+11.8 8.4+11.8+11.8 11.8+11.8+11.8
Piping connections
Liquid mm 19.1 (Brazing) 19.1 (Brazing)
Gas mm 34.9 (Brazing) 41.3 (Brazing) 41.3 (Brazing)
m3/minAirflow rate
Ivory white (5Y7.5/1) (Metallic brown )
Hermetically sealed scroll type
Ivory white (5Y7.5/1) (Metallic brown )
Hermetically sealed scroll type
kWCompressor
Type
Motor output(6.4×1)+(4.0×1)+(4.0×1)
(3.5×1)+(3.5×1)+(4.0×1)+(4.0×1)
(4.0×1)+(4.0×1)+(4.0×1)+(4.0×1)
(4.0×1)+(4.0×1)+(3.8×1)+(6.3×1)
(3.8×1)+(6.3×1)+(3.8×1)+(6.3×1)
(5.6×1)+(5.6×1)+(4.0×1)+(4.0×1)
(5.6×1)+(5.6×1)+(3.8×1)+(6.3×1)
(6.4×1)+(6.4×1)+(4.0×1)+(4.0×1)
(6.4×1)+(3.5×1)+(3.5×1)+(4.0×1)+(4.0×1)
(6.4×1)+(4.0×1)+(4.0×1)+(4.0×1)+(4.0×1)
(3.5×1)+(3.5×1)+(4.0×1)+(4.0×1)+(4.0×1)+(4.0×1)
(4.0×1)+(4.0×1)+(4.0×1)+(4.0×1)+(4.0×1)+(4.0×1)(4.0×1)+(4.0×1)+(4.0×1)+(4.0×1)+(4.0×1)+(4.0×1)
(4.0×1)+(4.0×1)+(4.0×1)+(4.0×1)+(3.8×1)+(6.3×1)
(4.0×1)+(4.0×1)+(3.8×1)+(6.3×1)+(3.8×1)+(6.3×1)
(3.8×1)+(6.3×1)+(3.8×1)+(6.3×1)+(3.8×1)+(6.3×1)
1
1 1 1 1 1 1 1 1 1
1
1 1
1 1 1 1 1 1 1 1 1 1 1 1
Notes: Specifications are based on the following conditions;•Cooling: Indoor temp.: 27°CDB, 19°CWB, Outdoor temp.: 35°CDB, Equivalent piping length: 7.5 m, Level difference: 0 m.•Sound level: Anechoic chamber conversion value, measured at a point 1 m in front of the unit at a height of 1.5 m.
During actual operation, these values are normally somewhat higher as a result of ambient conditions and oil recovery mode.When there is concern for noise to the surrounding area such as residences, we recommend investigating the installation location and taking soundproofing measures.
Note: 1. Models with (W) are the outdoor units with anti-corrosion specifications. For details, refer to pages 41 - 42 for more information.
Cooling Only
VRV A Series
VR
V H
Ser
ies
VRV H Series
49 50
Daikin’s VRV H series raised the standard of energy efficiency.
Greater energy savings during low-load operation
Higher Energy Efficiency Ratio (EER) for 10 HP
The key to innovativeenergy savings
14%Lower
Annual powerconsumption
10% 20% 30% 40% 50% 60% 70% 80% 90% 100%0
Load factor for the rated capacity
Op
erat
ion
per
iod Load factor of 50% or less
accounts for 80% of annual
operation period.
* Simulation conditions:• Location: Bangkok, Thailand
• System: Outdoor unit (10 HP) x 1
Indoor unit (2 HP, Round Flow with Sensing type) x 5
• Operation time: 8:00-20:00 5 days/week
• Outdoor units: New model: RXYQ10A (VRV H series)
Conventional model: RXYQ10T (VRV IV)
* Cooling operation conditions: • Indoor temperature of 27ºCDB, 19ºCWB, and outdoor temperature of 35ºCDB.
0
3
4
5
6
7
8
9
30% 40% 90% 100%50% 60% 70% 80% Load
Co
olin
g O
per
atio
n E
ER 8.167.78 7.57
6.775.92
5.234.68
4.09
Conventional model New model
Increased efficiencyduring low-load operation.
* Data source• Number of properties connected to the Air
Conditioning Network Service System: 42 projects
• Number of outdoor unit systems: 535 systems
• Data collection period: 8:00-18:00, weekdays
(excluding public holidays), from July 2015 to June
2016 in office buildings in Singapore.
Provides Highly-Efficient, Comfortable Cooling and Heating
Double outdoor units
RXYQ12-16AHYMV
Triple outdoor units
RXYQ18-44AHYMV
Single outdoor units
RXYQ6-20AYM
Double outdoor units
RXYQ22-40AYMV
Triple outdoor units
RXYQ42-60AYMV
High-COP Type Standard Type
6HP–60HP
Heat Pump
(16 kW) (168 kW)
51 52
VR
V H
Ser
ies
VRV H Series
* For the classification of indoor units (VRT smart control and VRT control), refer to the indoor unit lineup.
* The new mechanism is used in RXYQ10, 12 and 20A models.
Calculate• Indoor airflow rate• Target refrigerant temperature
Determine the target refrigerant temperature
Room temperature and set temperature
Compressor speed control
Coordinated control
New intermediate pressure mechanism
Back pressure control mechanism
Intermediate pressure adjustment port
The pressure on the orbiting scroll is optimised according to operating conditions. As a result, the orbiting scroll has been stabilised to increase efficiency during low-load operation.
Advanced TechnologiesAdvanced technologies for greater energy savings
Refrigerant leakage is minimized during low-load operationOptimally supply only for the needed capacity of indoor units• Reduces compressor load and minimizes operation loss so it is energy saving• Controls capacity according to load to ensure a constant room temperature for greater comfort.
By uniting advanced software and hardware technologies for greater energy savings during actual operation and combining the technologies of VRV, VRT and VAV, we have attained both energy savings and comfortable air conditioning.
Co
mp
ress
or
effi
cien
cy
New compressor
Conventional compressor
Load factor* Graph shown above is for illustration purposes only.
The back pressure control mecha-nism increases the efficiency during low-load operation.
• Refrigerant leakage is minimized by a back pressure control mechanism that increases the efficiency during low-load operation.
Fully Automatic Energy-saving Refrigerant Control
VRT Smart Control VRT Smart Control Function movie
New ScrollCompressormovie
Software technology New Scroll CompressorHardware technology
53 54
VR
V H
Ser
ies
VRV H Series
I-demand functionPeak power cut-off can be accomplished according to each user situation.
*Set on the PCB of the outdoor unit.
Standby power needed for preheating refrigerator oil was reduced up to 82.7% to save energy when the air conditioner is stopped.
Advanced Technologies
Advanced oil temperature control
*Operation calculation conditions: VRV H series 14 HP Location: SingaporeOperation time: 08:00–18:00 on weekdays
Extended operation range up to 49°C
Contribute to optimised operation efficiency, higher quality and easier installation.
This function prevents a capacity shortage or energy loss due to excessive or insufficient refrigerant.
The automatic refrigerant charge function automates the charging of the proper refrigerant amount and the closing of shut-off valves by simply pressing a switch after pre-charging.
• Automatic completion by proper refrigerant amount• Monitoring refrigerant charging is unnecessary• No recalculation of charge amounts due to minor design changes locally
Automatic refrigerant charge function
Optimised operation efficiency
Higher quality and easier installation
Calculation of necessary refrigerant amount from design drawing
1 Pre-charge of refrigerant2 Start of automatic refrigerant charge operation
3
Automatic Refrigerant Charge
R-410A
*There are conditions in the range of ambient temperature in which the automatic refrigerant charge can be used. Refer to the installation manual for details. *The refrigerant amount that can be automatically charged may differ from the additional refrigerant amount that is provided from calculations, but there are no problems in performance and quality.
Automatic RefrigerantCharge Functionmovie
Can be set in
5% increments
Total of 11 levels
Pow
er c
onsu
mpt
ion
Less
Mor
e
* When set to 70% demand
100%
70%
50%40%
0%Time
82.7%Reduction
High external static pressureVRV H series outdoor unit has been achieved high external static pressure up to 78.4 Pa.
Optimised Operation
Efficiency Cooling capacity
Optimal refrigerantamount
Refrigerant charge amount
Insufficientrefrigerant charge
Excessiverefrigerant charge
49°CDB0 10 20-20 -10 30 40
-5°CDB-5°CDB
-20°CWB 15.5°CWB15.5°CWB
Cooling
Heating
Outdoor temperature (°CDB)
55 56
VR
V H
Ser
ies
VRV H Series
Comfort & ReliabilityComfort
UNIQUE
F
Rotor
Function of information display by luminous digital tube
VRV H series utilises a bright 7-segment digital display to convey operational status and facilitate simple installation and after-sales service.
7-segment digital display
Displays system operation information directly
*SMT: Surface mounted technology
Computer control board surface adopting SMT packaging technology
*For single outdoor unit system RXYQ14-20AYM models. On-site settings are required using the PCB of the outdoor unit.
Malfunction
Malfunction
Emergencyoperation
Emergencyoperation
Stage 3
Priority
Automaticsequencing
132
Stage 2
Priority
Automaticsequencing
213
Stage 1
Priority 321
Peak in the outdoortemperature
8 hrs*1 10 hrs*2
8:00 12:00 16:00 20:00 0:00 4:00 8:00
50%
100%
Night mode ENDSNight mode STARTS
Night quiet mode
Min. 40 dB(A)*3
40 dB(A)
57 dB(A)
Load %
Operating sound dB(A)
Nighttime quiet operation function
The nighttime quiet operation function automatically suppresses the nighttime operating sound by reducing operation capacity to maintain the quiet environ-ment of the neighborhood. Three selectable modes are available depending on the required level.
Notes: • This function is available in setting at site.• The operating sound in quiet operation mode is the actual
value measured by our company. • The relationship of outdoor temperature (load) and time
shown above is just an example.
*1. Initial setting is 8 hours. Can be selected from 6, 8 and 10 hours.*2. Initial setting is 9 hours. Can be selected from 8, 9 and 10 hours.*3. In case of 10 HP outdoor unit.
Reliable and stable technologyHigh reliability at high ambient temperature
PCB
Power Module
RefrigerantRefrigerant JacketHeat
Refrigerant
Using refrigerant to cool the inverter power module helps minimise the size of the electronic components, and this results in reduction of airflow resistance and high efficiency of the heat exchanger.
Control board failure ratio at stable operation is reduced.
Outer rotor DC motor (ODM)
Only Daikin has adapted an ODM with the feature of stable rotation and volumetric efficiency.
Double backup operation functions
ODM(Outer Type)Conventional Motor(Inner Type)
F
Rotor
SMT* packaging technology
• Improves the anti-clutter performance.• Protects your computer boards from the adverse
effects of sandy climates and humid weather.
*SMT: Surface mounted technology
SMT packaging material
Computer control board
Automatic sequencing operation
HIGH TORQUEwith low energy
MORE efficient
Unit backup operation function Compressor backup operation function
This enables
• Suitability for high ambient temperatures
• Miniaturization of electronic components
Ease of maintenance
Can provide maintenance feature* without shutting down the whole VRV system.
*Field setting is required. This feature does not apply to residential indoor unit connection. For more information, please contact Daikin sales office. Area CArea BArea A
57 58
VR
V H
Ser
ies
VRV H Series
The long piping length provides more design flexibility, which can match even large-sized buildings.
Flexible System Design
Long piping length
Connection capacity at maximum is 200%.
Connection ratio
More options for installation location
Installation for VRV indoor units only
Max. 90 m
Between the first indoor branch and the farthest indoor unit
90 m
Max. level difference between the outdoor units and the indoor units
Note: The above is just a schematic diagram.
1000 mMax. total piping length
Conditions of VRV indoor unit connection capacity
Single outdoor units
Double outdoor units
Triple outdoor units
Applicable VRV indoor units
200%
Other VRV indoorunit models*1
200%160%130%
Connection ratio =Total capacity index of the indoor units
Capacity index of the outdoor units
* 1. No special requirements up to 40 m. The maximum actual piping length can be 90 m, depending on conditions. The VRV H series is easy to extend to 90 m by lessening the conditions from conventional VRV IV models. Be sure to refer to the Engineering Data Book for details of these conditions and requirements.
* 2. When level differences are 50 m or more, the diameter of the main liquid piping size must be increased. If the outdoor unit is above the indoor unit, a dedicated setting on the outdoor unit is required. Refer to the Engineering Data Book and contact your local dealer for more information.
Maximum allowable level difference
Maximum allowable piping length
Between the outdoor units and the indoor units
Between the indoor units
Between the outdoor units (Multiple use)
Between the first indoor branch and the farthest indoor unit
Between the outdoor branch and the last outdoor unit (Equivalent)
Total piping length
Actual piping length (Equivalent)
30 m
5 m
165 m (190 m)
1000 m
10 m (13 m)
90 m*2
90 m*1
*1 For the FXF(S)Q25, FXPQ and FXVQ models, maximum connection ratio is 130% for the entire range of outdoor units.
Note: If the operational capacity of indoor units is more than 130%, low airflow operation is enforced in all the indoor units.
*Refer to page 59 for outdoor unit combination details.
50%–200%
Connection ratio
*2
*1
Max. 5 m
Between the outdoor unitsMax. 13 m
Between the outdoor branchand the last outdoor unit
Max. level difference between the indoor units
30 m
FXB(P)QFXDQ
FXSQ
FXMQ-PA
FXAQ
Max. equivalent piping length
190 m
165 m
Max. actual piping length
Installation for mixed combination of VRV and residential indoor units
Max. total piping length 250 m
Max. equivalent piping length
120 m
Between the first indoor branch and the farthest VRV indoor unit
Max. level difference between the indoor units
15 m
15 m Max. level difference between the outdoor unit and the indoor unit
50 m
5 m
Note: The above is just a schematic diagram.
BP unit
RA
RA
RA
RA
VRV
BP unit
Max. 15 m
Between BP unit and indoor unitMax. level difference between the
outdoor unit and the BP units
40 m
Max. level difference between BP unit
Max. level difference between the BP unit and the indoor unit
VRV: VRV indoor unit RA: Residential indoor unit
Max. 50 m
Maximum allowablepiping length
Minimum allowable piping length
Maximum allowablelevel difference
Between the outdoor unitand the indoor unit
Between BP unit and indoor unit
Between the indoor units
Between BP units
Between the first indoor branch and the farthest BP unit or between the first indoor branch and the farthest VRV indoor unit
Total piping length
Actual piping length (Equivalent)
Between outdoor unit and the first indoor branch
15 m
15 m
100 m (120 m)
250 m
2 m–15 m
2 m–8 m
50 m*1
5 m
50 mIf the outdoor unit is above.
If the outdoor unit is below.
If indoor unit capacity index < 60.
If indoor unit capacity index is 71.
2 m–12 mIf indoor unit capacity index is 60.
40 m
40 m
*1. If the piping length between the first indoor branch and BP unit or VRV indoor unit is over 20 m, it is necessary to increase the gas and liquid piping size between the first indoor branch and BP unit or VRV indoor unit. If the piping diameter of the sized up piping exceeds the diameter of the piping before the first indoor branch kit, then the latter also requires a liquid piping and gas piping size up. Please refer to Engineering Data Book for details.
*When a mixed combination of VRV and residential indoor units is connected or when only residential indoor units are connected, connection ratio must be 80% to 130%. Refer to page 59 for outdoor unit combination details.
Between the outdoor unit and the BP unit
5 mBetween the BP unit and the indoor unit
*1
When a mixed combination of VRV and residential indoor units is connected
59 60
VR
V H
Ser
ies
VRV H Series
Outdoor unit combinations
The outdoor unit capacity is up to 60 HP (168 kW) in increments of 2 HP.
Outdoor Unit Lineup
For connection of VRV indoor units only
VRV H Series
Lineup
8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60HP 6
VRV HSERIES
High-COP Type
Standard Type
For mixed combination of VRV and residential indoor units
Notes: *1. Only single outdoor unit (RXYQ6-20AYM) can be connected.*2. Total capacity index of connectable indoor units must be 80%–130% of the capacity index of the outdoor unit.
16.0
22.4
28.0
33.5
40.0
45.0
50.0
56.0
6
8
10
12
14
16
18
20
150
200
250
300
350
400
450
500
150
200
250
300
350
400
450
500
195
260
325
390
455
520
585
650
130%
9
13
16
19
22
26
29
32
Model name*1 kW HP Capacityindex
Maximum number ofconnectable indoor units
120
160
200
240
280
320
360
400
80% 100%
Combination (%)
Total capacity index of connectable indoor units*2
RXYQ6AYM
RXYQ8AYM
RXYQ10AYM
RXYQ12AYM
RXYQ14AYM
RXYQ16AYM
RXYQ18AYM
RXYQ20AYM
Notes: *1. For multiple connection, the outdoor unit multi connection piping kit (separately sold) is required.*2. Values inside brackets are based on connection of indoor units rated at maximum capacity, 200% for single outdoor units, 160% for double outdoor units, and 130%
for triple outdoor units. Refer to page 57 for notes on connection capacity of indoor units.
HP Combination
RXYQ8A
RXYQ10A
RXYQ12A
RXYQ14A
RXYQ16A
RXYQ18A
RXYQ20A
RXYQ10A + RXYQ12A
RXYQ12A × 2
RXYQ12A + RXYQ14A
RXYQ12A + RXYQ16A
RXYQ12A + RXYQ18A
RXYQ16A × 2
RXYQ16A + RXYQ18A
Model name
RXYQ8A
RXYQ10A
RXYQ12A
RXYQ14A
RXYQ16A
RXYQ18A
RXYQ20A
RXYQ22A
RXYQ24A
RXYQ26A
RXYQ28A
RXYQ30A
RXYQ32A
RXYQ34A
8
10
12
14
16
18
20
22
24
26
28
30
32
34
RXYQ16A + RXYQ20ARXYQ36A36
Maximum number ofconnectable indoor units*2
Total capacity index of connectable indoor units*2
Outdoor unit multi connection piping kit*1
Capacityindex
22.4
RXYQ6ARXYQ6A6 16.0
28.0
33.5
40.0
45.0
50.0
56.0
61.5
67.0
73.5
78.5
83.5
90.0
101
RXYQ18A + RXYQ20ARXYQ38A38 106
RXYQ20A × 2RXYQ40A40 112
RXYQ12A × 2 + RXYQ18ARXYQ42A42 117
RXYQ12A × 2 + RXYQ20ARXYQ44A44 123
RXYQ14A + RXYQ16A × 2RXYQ46A46 130
RXYQ16A × 3RXYQ48A48 135
RXYQ16A × 2 + RXYQ18ARXYQ50A50 140
RXYQ16A + RXYQ18A × 2
100 to 260 (400)
125 to 325 (500)
150 to 390 (600)
175 to 455 (700)
200 to 520 (800)
225 to 585 (900)
250 to 650 (1,000)
275 to 715 (880)
300 to 780 (960)
325 to 845 (1,040)
350 to 910 (1,120)
375 to 975 (1,200)
400 to 1,040 (1,280)
425 to 1,105 (1,360)
13 (20)
16 (25)
19 (30)
22 (35)
26 (40)
29 (45)
32 (50)
35 (44)
39 (48)
42 (52)
45 (56)
48 (60)
52 (64)
55 (64)
58 (64)
61 (64)
64 (64)
–
–
–
–
–
–
–
BHFP22P100
BHFP22P151
450 to 1,170 (1,440)
75 to 195 (300) 9 (15)–
475 to 1,235 (1,520)
500 to 1,300 (1,600)
525 to 1,365 (1,365)
550 to 1,430 (1,430)
575 to 1,495 (1,495)
600 to 1,560 (1,560)
625 to 1,625 (1,625)
650 to 1,690 (1,690)
675 to 1,755 (1,755)
700 to 1,820 (1,820)
725 to 1,885 (1,885)
750 to 1,950 (1,950)
RXYQ52A52
200
250
300
350
400
450
500
550
600
650
700
750
800
850
900
150
950
1,000
1,050
1,100
1,150
1,200
1,250
1,300
1,350
1,400
1,450
1,500
145
kW
95.0
Standard Type
RXYQ18A × 3RXYQ54A54 150
RXYQ18A × 2 + RXYQ20ARXYQ56A56 156
RXYQ18A + RXYQ20A × 2RXYQ58A58 162
RXYQ20A × 3RXYQ60A60 168
HP Combination
RXYQ6A × 2
RXYQ6A + RXYQ8A
RXYQ8A × 2
RXYQ6A × 3
RXYQ6A × 2 + RXYQ8A
RXYQ6A + RXYQ8A × 2
RXYQ8A × 3
RXYQ8A × 2 + RXYQ10A
RXYQ8A × 2 + RXYQ12A
RXYQ8A + RXYQ10A + RXYQ12A
RXYQ8A + RXYQ12A × 2
RXYQ10A + RXYQ12A × 2
Model name
RXYQ12AH
RXYQ14AH
RXYQ16AH
RXYQ18AH
RXYQ20AH
RXYQ22AH
RXYQ24AH
RXYQ26AH
RXYQ28AH
RXYQ30AH
RXYQ32AH
RXYQ34AH
12
14
16
18
20
22
24
26
28
30
32
34
Maximum number ofconnectable indoor units*2
Total capacity index of connectable indoor units*2
Outdoor unit multi connection piping kit*1
Capacityindex
32.0
38.4
44.8
48.0
54.4
60.8
67.2
72.8
78.3
83.9
89.4
kW
95.0
150 to 390 (480)
175 to 455 (560)
200 to 520 (640)
225 to 585 (585)
250 to 650 (650)
275 to 715 (715)
300 to 780 (780)
325 to 845 (845)
350 to 910 (910)
375 to 975 (975)
400 to 1,040 (1,040)
425 to 1,105 (1,105)
19 (24)
22 (28)
26 (32)
29 (29)
32 (32)
35 (35)
39 (39)
42 (42)
45 (45)
48 (48)
52 (52)
55 (55)
450 to 1,170 (1,170)
475 to 1,235 (1,235)
500 to 1,300 (1,300)
525 to 1,365 (1,365)
550 to 1,430 (1,430)
58 (58)
61 (61)
64 (64)
BHFP22P151
BHFP22P100
300
350
400
450
500
550
600
650
700
750
800
850
900
950
1,000
1,050
1,100
High-COP Type
RXYQ12A × 3RXYQ36AH36 101
RXYQ12A × 2 + RXYQ14ARXYQ38AH38 107
RXYQ12A × 2 + RXYQ16ARXYQ40AH40 112
RXYQ10A + RXYQ16A × 2RXYQ42AH42 118
RXYQ12A + RXYQ16A × 2RXYQ44AH44 124
61 62
VR
V H
Ser
ies
VRV H SeriesFl
oor
Stan
ding
Ceilin
g Su
spen
ded
Cat
egor
yC
eilin
g M
ount
ed C
asse
tte
Cei
ling
Con
ceal
ed D
uct
Indoor Unit Lineup
Note: BP units are necessary for residential indoor units. Only single outdoor unit (RXYQ6-20AYM) can be connected.
20
20
2.0
25 35
25 35
2.5 3.5
50 60 71
50 60 71
5.0 6.0 7.1Rated Capacity (kW)Type Model Name
Capacity Index
Slim CeilingConcealed Duct
Wall Mounted
CDXS-EAVMA(700 mm width type)
(900/1,100 mm width type)
Enhanced range of choices
Spot Air Conditioner
FXZQ-AVM
FXPQ-AVN
VRT
FDXS-CVMA VRT
FTXJ-NVMVW VRT
FTXJ-NVMVS VRT
FTXS-DVMA
FTXS-EVMAVRT
FTXS-FVMA VRT
Residential indoor units with connection to BP unitsVRV indoor units VRT smart
VRT smart
VRT smart
VRT smart
VRT smart
VRT smart
VRT smart
VRT smart
VRT smart
VRT smart
VRT smart
VRT smart
VRT smart
VRT
VRT
VRT
VRT
VRT
VRT
VRT
VRT
VRT
VRT
VRT
VRT
VRT
VRT
Indoor units subject to VRT smart control
Indoor units subject to VRT control
FXDSQ-AVM
FXSQ-PAVE
Capacity Range
Capacity Index 20
0.8 HP
20
1.6 HP
40
2.5 HP
63
3.2 HP
80
3 HP
71
4 HP
100
5 HP
125
6 HP
140
8 HP
200
10 HP
250
2 HP1.25 HP
32
62.531.25
1 HP
25
Type Model Name
FXFSQ-AVM
Ceiling Suspended
Wall Mounted
Floor Standing
Concealed Floor Standing
4-Way Flow Ceiling Suspended
Outdoor-Air Processing Unit
FXVQ-NY1
FXVQ-NY16(high static pressure type)
Floor Standing Duct
FXDQ-SPV1
400
16 HP
500
20 HP
FXMQ-MFV1
Heat Reclaim Ventilator
Air Handling Unit
Heat Reclaim Ventilator with DX-Coil and Humidifier
VKM-GA(M)V1
VAM-GJVE
AHUR
Airflow rate 500-1000 m3/h
Airflow rate 150-2000 m3/h
Clean Room Air ConditionerFXBQ-PVE
FXBPQ-PVE
FXEQ-AV36
FXFQ-AVM
FXCQ-AVM
FXMQ-PAVE
FXMQ-PVM
FXHQ-AVM
FXUQ-AVEB
FXHQ-MAVE
FXAQ-AVM
FXLQ-MAVE
FXNQ-MAVE
FXDQ-PDVE(with drain pump)
FXDQ-PDVET(without drain pump)
FXDQ-NDVE(with drain pump)
FXDQ-NDVET(without drain pump)
(700 mm width type)
( )900/1,100 mmwidth type
6–120 HP
50
40 8071 100 125 140 200 25025 400 50050
VRV indoor units combine with residential indoor units, all in one system.
VRV indoor units only
VRV indoor units
BP unit
Residential indoor units
BP unit
Residential indoor units only
BP unit
VRV indoor unit only system
Residential indoor unit only system
Residential indoor unit and VRV indoor unit mix system
64Max.
indoor units
• If a system has indoor units subject to both VRT smart and VRT control, the system is operated under VRT control.• If a system has both outdoor-air processing air conditioners and outdoor-air processing type indoor units, VRT smart control and VRT control are disabled.
32Max.
indoor units
• BP units are necessary for residential indoor units. Only single outdoor unit (RXYQ6-20AYM) can be connected.• If a system has only residential indoor units, the system is operated under VRT control.
32Max.
indoor units
• BP units are necessary for residential indoor units. Only single outdoor unit (RXYQ6-20AYM) can be connected.• If a system has both residential indoor units and VRV indoor units, the system is operated under VRT control.
New lineup
3D Airflow Duct with Sensing
Middle Static Pressure Duct
Round Flow Cassette with Sensing
Round Flow Cassette
Compact Multi Flow Cassette
Double Flow Cassette
Single Flow Cassette
Slim Duct (Standard)
Middle-High Static Pressure Duct
High Static Pressure Duct
Slim Duct (Compact)
63 64
VR
V H
Ser
ies
VRV H Series
Outdoor Units
Specifications
High-COP Type
Model
Combination units
Power supply
Cooling capacity
Heating capacity
Power consumption
Casing colour
Airflow rate
Dimensions (H×W×D)
Machine weight
Sound level
Operation range
RefrigerantType
Cooling
Cooling
Heating
Heating
Charge
Piping connections
Liquid
Gas
Btu/h
Btu/h
kW
kW
kW
kW
m3/min
mm
kg
dB(A)
°CWB
°CDB
kg
mm
mm
Model
Combination units
Power supply
Cooling capacity
Heating capacity
Power consumption
Casing colour
Airflow rate
Dimensions (H×W×D)
Machine weight
Sound level
Operation range
RefrigerantType
Cooling
Heating
Cooling
Heating
Charge
Piping connections
Liquid
Gas
Btu/h
Btu/h
kW
kW
kW
kW
m3/min
mm
kg
dB(A)
°CDB
°CWB
kg
mm
mm
RXYQ12AHYMV
RXYQ6AYM
RXYQ6AYM
109,000
32.0
123,000
36.0
6.76
7.46
131,000
38.4
147,000
43.0
8.55
9.40
153,000
44.8
171,000
50.0
10.3
11.3
Ivory white (5Y7.5/1)
178+178
-20 to 15.5
R-410A
-20 to 15.5
-5 to 49 -5 to 49
R-410A
28.6 (Brazing)
119+119+178119+119+119 119+178+178 178+178+178 178+178+191
(1,657×930×765)+(1,657×930×765)+(1,657×930×765)
119+178
185+185
6.9+7.06.9+6.9 7.0+7.0
12.7 (Brazing)
185+185+185
61
185+200+200185+185+200185+185+185
61
7.0+7.0+7.06.9+7.0+7.0
15.9 (Brazing)
7.0+7.0+7.4 7.0+7.0+7.6
19.1 (Brazing)
28.6 (Brazing) 34.9 (Brazing)
7.0+7.4+7.6
62
6.9+6.9+6.9 6.9+6.9+7.0
15.9 (Brazing)
(1,657×930×765)+(1,657×930×765) (1,657×930×765)+(1,657×930×765)+(1,657×930×765)
119+119
59
Ivory white (5Y7.5/1)
164,000
48.0
184,000
54.0
10.1
11.2
186,000
54.4
208,000
61.0
11.9
13.1
—
RXYQ14AHYMV
RXYQ6AYM
RXYQ8AYM
—
RXYQ16AHYMV
RXYQ8AYM
RXYQ8AYM
—
RXYQ18AHYMV
RXYQ6AYM
RXYQ6AYM
RXYQ6AYM
RXYQ20AHYMV
RXYQ6AYM
RXYQ6AYM
RXYQ8AYM
RXYQ22AHYMV
RXYQ6AYM
RXYQ8AYM
RXYQ8AYM
RXYQ24AHYMV
RXYQ8AYM
RXYQ8AYM
RXYQ8AYM
RXYQ26AHYMV
RXYQ8AYM
RXYQ8AYM
RXYQ10AYM
3-phase 4-wire system, 380-415 V/380 V, 50/60 Hz3-phase 4-wire system, 380-415 V/380 V, 50/60 Hz
RXYQ32AHYMV
RXYQ8AYM
RXYQ12AYM
RXYQ12AYM
RXYQ34AHYMV
RXYQ10AYM
RXYQ12AYM
RXYQ12AYM
RXYQ36AHYMV
RXYQ12AYM
RXYQ12AYM
RXYQ12AYM
RXYQ38AHYMV
RXYQ12AYM
RXYQ12AYM
RXYQ14AYM
RXYQ40AHYMV
RXYQ12AYM
RXYQ12AYM
RXYQ16AYM
RXYQ42AHYMV
RXYQ10AYM
RXYQ16AYM
RXYQ16AYM
RXYQ44AHYMV
RXYQ12AYM
RXYQ16AYM
RXYQ16AYM
3-phase 4-wire system, 380-415 V/380 V, 50/60 Hz 3-phase 4-wire system, 380-415 V/380 V, 50/60 Hz
Ivory white (5Y7.5/1)
178+257+257 191+257+257191+191+257191+191+191
(1,657×930×765)+(1,657×930×765)+(1,657×930×765) (1,657×930×765)+(1,657×930×765)+(1,657×1,240×765)
178+191+191
200+200+200 200+200+285185+200+200
6463
(1,657×930×765)+(1,657×1,240×765)+(1,657×1,240×765)
200+285+285
64
-5 to 49
R-410A
-5 to 49
-20 to 15.5 -20 to 15.5
R-410A
19.1 (Brazing) 19.1 (Brazing)
Ivory white (5Y7.5/1)
Hermetically sealed scroll type Hermetically sealed scroll type
Hermetically sealed scroll typeHermetically sealed scroll type
RXYQ28AHYMV
RXYQ8AYM
RXYQ8AYM
RXYQ12AYM
RXYQ30AHYMV
RXYQ8AYM
RXYQ10AYM
RXYQ12AYM
207,000 229,000 248,000 267,000 286,000
60.8 67.2 72.8 78.3 83.9
232,000 256,000 278,000 299,000 321,000
68.0 75.0 81.5 87.5 94.0
13.7 15.5 17.2 19.0 20.7
15.1 17.0
403,000 423,000
118 124
450,000 471,000
132 138
32.6 34.5
32.4
382,000
112
427,000
125
30.3
30.4
365,000
107
409,000
120
28.1
28.8
345,000
101
386,000
113
26.1
26.7
324,000
95.0
365,000
107
24.2
25.1
305,000
89.4
341,000
100
22.6
23.5 34.1
7.4+9.3+9.37.6+7.6+9.37.6+7.6+9.17.6+7.6+7.67.4+7.6+7.67.0+7.6+7.6 7.6+9.3+9.3
34.9 (Brazing) 41.3 (Brazing) 41.3 (Brazing)
18.6 20.3 21.8
12-100 11-100 10-100 8-100 7-100
3-1004-1005-100
(4.5×1)+(3.6×1)+(3.7×1)(3.6×1)+(3.7×1)
(5.5×1)+(5.5×1)+(3.6×1)+(3.7×1)
(5.5×1)+(5.5×1)+(2.9×1)+(3.3×1)
(5.5×1)+(5.5×1)+(5.5×1)(4.5×1)+(5.5×1)+(5.5×1)(3.4×1)+(5.5×1)+(5.5×1) (5.5×1)+(3.6×1)+(3.7×1)(3.6×1)+(3.7×1)
5-100
(2.4×1)+(2.4×1) (2.4×1)+(3.4×1) (3.4×1)+(3.4×1) (2.4×1)+(2.4×1)+(2.4×1) (2.4×1)+(2.4×1)+(3.4×1) (2.4×1)+(3.4×1)+(3.4×1) (3.4×1)+(3.4×1)+(3.4×1) (3.4×1)+(3.4×1)+(4.5×1) (3.4×1)+(3.4×1)+(5.5×1) (3.4×1)+(4.5×1)+(5.5×1)kW
%
CompressorType
Motor output
Capacity control
Capacity control
kW
%
Compressor
Type
Motor output
Notes: Specifications are based on the following conditions;• Cooling: Indoor temp.: 27°CDB, 19°CWB, Outdoor temp.: 35°CDB, Equivalent piping length: 7.5
m, Level difference: 0 m.• Heating: Indoor temp.: 20°CDB, Outdoor temp.: 7°CDB, 6°CWB, Equivalent piping length: 7.5 m,
Level difference: 0 m.• Sound level: Anechoic chamber conversion value, measured at a point 1 m in front of the unit
at a height of 1.5 m.During actual operation, these values are normally somewhat higher as a result of ambient conditions and oil recovery mode.When there is concern for noise the surrounding area such as residences, we recommend investigating the installation location and taking soundproofing measures.
VRV H Series
Heat Pump
65 66
VR
V H
Ser
ies
VRV H Series
Outdoor Units
Specifications
Standard Type
Model
Combination units
Power supply
Cooling capacity
Heating capacity
Power consumption
Casing colour
Airflow rate
Dimensions (H×W×D)
Machine weight
Sound level
Operation range
RefrigerantType
Cooling
Cooling
Heating
Heating
Charge
Piping connections
Liquid
Gas
Btu/h
Btu/h
kW
kW
kW
kW
m3/min
mm
kg
dB(A)
°CDB
°CWB
kg
mm
mm
Model
Combination units
Power supply
Cooling capacity
Heating capacity
Power consumption
Casing colour
Airflow rate
Dimensions (H×W×D)
Machine weight
Sound level
Operation range
RefrigerantType
Cooling
Cooling
Heating
Heating
Charge
Piping connections
Liquid
Gas
Btu/h
Btu/h
kW
kW
kW
kW
m3/min
mm
dB(A)
°CWB
°CDB
kg
kg
mm
mm
RXYQ6AYM
—
—
—
—
—
—
—
—
—
—
— — — —
—
—
—
—
RXYQ8AYM RXYQ10AYM RXYQ12AYM RXYQ14AYM RXYQ16AYM RXYQ20AYM RXYQ22AYMV RXYQ24AYMV RXYQ26AYMV RXYQ28AYMV RXYQ30AYMV
RXYQ10AYM RXYQ12AYM RXYQ12AYM RXYQ12AYM RXYQ12AYM
RXYQ12AYM RXYQ12AYM RXYQ14AYM RXYQ16AYM RXYQ18AYM
3-phase 4-wire system, 380-415 V/380 V, 50/60 Hz 3-phase 4-wire system, 380-415 V/380 V, 50/60 Hz
Ivory white (5Y7.5/1) Ivory white (5Y7.5/1)
25-100 20-100 13-100 12-100 11-100 10-100 10-100
Hermetically sealed scroll type
2.4×1 3.4×1 4.5×1 5.5×1 (2.9×1)+(3.3×1) (3.6×1)+(3.7×1)
Hermetically sealed scroll type
54,600 76,400 95,500 114,000 136,000 154,000 191,000 210,000 229,000 251,000 268,000 285,000
16.0 22.4 28.0 33.5 40.0 45.0
215,000 235,000 256,000 281,000 299,000 319,000
63.0 69.0 75.0 82.5 87.5 93.5
17.7 15.5 17.4 19.4 21.6 24.0
17.1 16.1 17.8 19.9 21.5 23.8
61,400 85,300 107,000 128,000 154,000 171,000
18.0 25.0 31.5 37.5 45.0 50.0
3.38 5.17 6.84 8.70 10.7 12.9
3.73 5.67 7.23 8.91 11.0 12.6
56.0 61.5 67.0 73.5 78.5 83.5
324,000 345,000 362,000 382,000 399,000 420,000 444,000 461,000 478,000 495,000 512,000 532,000 553,000 573,000
95.0 101 106 112 117 123 130 135 140 145 150 156 162 168
495,000 512,000 532,000 553,000 573,000 597,000 621,000 645,000
145 150 156 162 168 175 182 189
36.5 38.7 41.1 43.5 45.9 48.3 50.7 53.1
36.2 37.8 40.1 42.4 44.7 46.9 49.1 51.3
362,000 386,000 406,000 430,000 447,000 471,000
106 113 119 126 131 138
28.2 30.6 33.0 35.4 32.7 35.1
27.5 29.7 32.0 34.2 32.7 34.9
119 191 257 297252 178+191 191+191 191+257 191+252 257+257178
1,657×930×765 1,657×1,240×765 1,657×1,240×765 (1,657×930×765)+(1,657×930×765) (1,657×930×765)+(1,657×1,240×765)(1,657×1,240×765)+(1,657×1,240×765)
185 200 285 325 200+200 200+285 200+305 285+285
-5 to 49
-20 to 15.5 -20 to 15.5
-5 to 49
R-410A R-410A
56 57 59 60 65 61 62 63
6.9 7.0 7.4 7.6 9.1 9.3 11.8 7.4+7.6 7.6+7.6 7.6+9.1 7.6+9.3 7.6+11.8
9.5 (Brazing) 12.7 (Brazing)
—
—
RXYQ18AYM
171,000
50.0
191,000
56.0
15.3
14.9
305
61
15.9 (Brazing) 19.1 (Brazing)
19.1 (Brazing) 22.2 (Brazing) 28.6 (Brazing) 28.6 (Brazing) 34.9 (Brazing)
RXYQ34AYMV RXYQ36AYMV RXYQ38AYMV RXYQ40AYMV RXYQ42AYMV RXYQ44AYMV
RXYQ16AYM RXYQ16AYM RXYQ18AYM RXYQ20AYM RXYQ12AYM RXYQ12AYM
RXYQ18AYM RXYQ20AYM RXYQ20AYM RXYQ20AYM RXYQ12AYM RXYQ12AYM
RXYQ18AYM RXYQ20AYM
RXYQ46AYMV RXYQ48AYMV RXYQ50AYMV RXYQ52AYMV RXYQ54AYMV RXYQ56AYMV RXYQ58AYMV RXYQ60AYMV
RXYQ14AYM RXYQ16AYM RXYQ16AYM RXYQ16AYM RXYQ18AYM RXYQ18AYM RXYQ18AYM RXYQ20AYM
RXYQ16AYM RXYQ16AYM RXYQ16AYM RXYQ18AYM RXYQ18AYM RXYQ18AYM RXYQ20AYM RXYQ20AYM
RXYQ16AYM RXYQ16AYM RXYQ18AYM RXYQ18AYM RXYQ18AYM RXYQ20AYM RXYQ20AYM RXYQ20AYM
3-phase 4-wire system, 380-415 V/380 V, 50/60 Hz 3-phase 4-wire system, 380-415 V/380 V, 50/60 Hz
Ivory white (5Y7.5/1)Ivory white (5Y7.5/1)
Hermetically sealed scroll typeHermetically sealed scroll type
(4.1×1)+(4.0×1)+(4.1×1)+(4.0×1)+(4.1×1)+(4.0×1)
(4.1×1)+(4.0×1)+(4.1×1)+(4.0×1)+(3.7×1)+(6.3×1)
(4.1×1)+(4.0×1)+(3.7×1)+(6.3×1)+(3.7×1)+(6.3×1)
(3.7×1)+(6.3×1)+(3.7×1)+(6.3×1)+(3.7×1)+(6.3×1)
257+252 297+297252+297257+297 191+191+252 191+191+297 257+257+257 257+257+252 257+252+252 252+252+252 252+252+297 252+297+297 297+297+297
(1,657×1,240×765)+(1,657×1,240×765) (1,657×930×765)+(1,657×930×765)+(1,657×1,240×765) (1,657×1,240×765)+(1,657×1,240×765)+(1,657×1,240×765)
285+285+285 285+305+305285+285+305 305+305+305 305+305+325 305+325+325 325+325+325
65 66 68 69 70
-20 to 15.5
-5 to 49
R-410A
9.1+9.3+9.3 9.3+9.3+9.3 9.3+9.3+11.8 9.3+11.8+11.8 11.8+11.8+11.8
19.1 (Brazing)
41.3 (Brazing)
285+305 285+325 305+325 325+325 200+200+305 200+200+325
64 66 68 65 67
-20 to 15.5
-5 to 49
R-410A
307,000
90.0
341,000
100
25.8
25.2
RXYQ32AYMV
RXYQ16AYM
RXYQ16AYM
9.3+9.3
9.3+11.8 11.8+11.8 7.6+7.6+11.8
19.1 (Brazing)
34.9 (Brazing) 41.3 (Brazing)
Capacity control
kW
%
CompressorType
Motor output
Capacity control
kW
%
Compressor
Type
Motor output
7-100 6-100 5-100
(4.1×1)+(4.0×1) (3.7×1)+(6.3×1) (4.5×1)+(5.5×1) (5.5×1)+(5.5×1) (5.5×1)+(2.9×1)+(3.3×1) (5.5×1)+(3.6×1)+(3.7×1) (5.5×1)+(4.1×1)+(4.0×1) (3.6×1)+(3.7×1)+(3.6×1)+(3.7×1)
5-100 4-100 4-100 3-100 2-1003-1003-100
(3.6×1)+(3.7×1)+(4.1×1)+(4.0×1)
(3.6×1)+(3.7×1)+(3.7×1)+(6.3×1)
(4.1×1)+(4.0×1)+(3.7×1)+(6.3×1)
(3.7×1)+(6.3×1)+(3.7×1)+(6.3×1)
(5.5×1)+(5.5×1)+(4.1×1)+(4.0×1)
(5.5×1)+(5.5×1)+(3.7×1)+(6.3×1)
(2.9×1)+(3.3×1)+(3.6×1)+(3.7×1)+(3.6×1)+(3.7×1)
(3.6×1)+(3.7×1)+(3.6×1)+(3.7×1)+(3.6×1)+(3.7×1)
(3.6×1)+(3.7×1)+(3.6×1)+(3.7×1)+(4.1×1)+(4.0×1)
(3.6×1)+(3.7×1)+(4.1×1)+(4.0×1)+(4.1×1)+(4.0×1)
Notes: Specifications are based on the following conditions;• Cooling: Indoor temp.: 27°CDB, 19°CWB, Outdoor temp.: 35°CDB, Equivalent piping length: 7.5 m, Level difference: 0 m.• Heating: Indoor temp.: 20°CDB, Outdoor temp.: 7°CDB, 6°CWB, Equivalent piping length: 7.5 m, Level difference: 0 m.
• Sound level: Anechoic chamber conversion value, measured at a point 1 m in front of the unit at a height of 1.5 m.During actual operation, these values are normally somewhat higher as a result of ambient conditions and oil recovery mode.When there is concern for noise the surrounding area such as residences, we recommend investigating the installation location and taking soundproofing measures.
VRV H Series
Heat Pump
67 68
VR
V S
Hig
h E
ffici
ency
Ser
ies
VRV S High Efficiency Series
Energy savings & comfort
High performance & reliability
Design flexibility of installation
Energy savings& comfort
High performance& reliability
Designflexibility ofinstallation
Higher energy efficiencyVRT Smart Control Quiet operation
Extended operation range up to 52°CHigh voltage shield PCBAutomatic refrigerant charge function
The high external static pressure of 40 Pa enables installation in small installation spaces where the airflow direction needs to be diverted to avoid short circuits.Low height casing designIncreased actual piping length up to 120 m
New VRV S High Efficiency Series achieves higher energy efficiency with a variety of function for comfort and high performance. A wide range of options for installation location and application are easily achieved by the low height casing, long piping length and other features.
The VRV S High Efficiency Series concept
The Ideal Air Conditioning System for Residential Houses, Small Offices and Shops
Cooling Only
RSUQ4-6AVMRSUQ7AYM
Heat Pump
RSUYQ4-6AVMRSUYQ7AYM
4HP–7HP
Cooling OnlyHeat Pump
(11.2 kW) (20 kW)
PresentationMovie
69 70
VRT Smart ControlVRT Smart function is available in the VRV S High Efficiency Series for the first time. Coordination between indoor and outdoor units minimizes energy consumption by optimising capacity to meet actual operation load.
The large heat exchanger and highly efficient new swing compressor reduces power consumption and realizes higher energy efficiency. Low operation sound
New fan and bell mouth help enable low operation sound.
V-cut & irregular pitch propeller fan
The fan's V-cut enables streamlined and effective airflow.
Air streams collide and generate loss
Air streams are smoothed around V-cut and reduces airflow loss
Irregular blade pitch also contributes to reduced airflow noise.
Nighttime quiet operation functionThe nighttime quiet operation function automatically suppresses the nighttime operating sound by reducing operation capacity to maintain the quiet environment of the neighborhood. Three selectable modes are available depending on the required level. This function is suitable for use in residential areas.
Energy Savings & Comfort
Higher energy efficiency Quiet operation
Energy savings Comfort
6-7 HP 4-7 HP
Cooling 4 HP 5 HP 6 HP 7 HP
New 51 51 52 58
dB(A)
Cooling Night Quiet Mode
RSU(Y)Q4/5/6A Min. 40 dB(A)
RSU(Y)Q7A Min. 45 dB(A)
A˚
B˚
C˚
Co
olin
g O
per
atio
n E
ER
VRV IV S VRV S High Efficiency Series
EER
4 HP2.0
3.0
4.0
5.0
5 HP 6 HP 7 HP
4.50
4.073.90 3.83
A˚< B˚< C˚
Old New
SeparateCollision
4-7 HP models maintain high EER in the new compact single fan design.
Notes: • For the classification of indoor units (VRT smart control and VRT control), refer to pages 77 - 78.• If a system has indoor units subject to both VRT smart and VRT control, the system is operated under VRT control.• If a system has both outdoor-air processing air conditioners and outdoor-air processing type indoor units, VRT smart control and VRT control are disabled.
Calculate• Indoor airflow rate• Target refrigerant temperature
Determine the target refrigerant temperature
Room temperature and set temperature
Compressor speed control
Peak in the outdoortemperature
8 hrs 10 hrs
8:00 12:00 16:00 20:00 0:00 4:00 8:00
50%
100%
Night mode ENDSNight mode STARTS
Night quiet mode
Min. 40 dB(A)40 dB(A)
52 dB(A)
VR
V S
Hig
h E
ffici
ency
Ser
ies
VRV S High Efficiency Series
Coordinated control
Notes: • This function is available in setting at site.• The operating sound in quiet operation mode is the actual value
measured by our company. • The relationship of outdoor temperature (load) and time shown
above is just an example.• In case of 4-6 HP outdoor unit
Load %
Operating sound dB(A)
71 72
The large heat exchanger ensures sufficient cooling capacity even in high ambient temperatures.
The outdoor operation temperature range is now extended to 52ºC.This enables reliable operation even under high temperature conditions and a wider choice of installation locations.
New heat exchanger
High Performance & ReliabilityHigh temperature operationExtended operation range up to 52°C
Rated cooling capacity can be maintained even when outdoor temperature is up to 43°C.
Keep rated cooling capacity in high outdoor temperature up to 43°C
Refrigerant cooled PCBDaikin’s unique refrigerant cooling helps maintain high cooling capacity even during high outdoor temperatures.
• 2-sided 3-row• Heat exchanger area 68%UP
(4,5 HP model only)
Cooling capacity
Outdoor temperature (°CDB)
52°C0 10 20 30 40 46-5
New VRV S High Efficiency Series
The refrigerant-cooled PCB and large 3-row heat exchanger raise the maximum cooling outdoor operation temperature from 46°C to 52°C.
Cooling
Previous VRV IV S Series
100%
43 523510 39
New VRV S High Efficiency Series
Previous VRV IV S Series
Outdoor temperature (°CDB)
VR
V S
Hig
h E
ffici
ency
Ser
ies
VRV S High Efficiency Series
The high voltage shield PCB protects the electrical parts and prevents malfunctions at the highest voltage of 440 V.
* Continuous operation range is 198 to 264 V.
Contribute to optimised operation efficiency, higher quality and easier installation.
This function prevents a capacity shortage or energy loss due to excessive or insufficient refrigerant.
High voltage shield PCB (4-6 HP model only)
Automatic refrigerant charge function
Optimised operation efficiency
Higher quality and easier installation
Optimised Operation
Efficiency Cooling capacity
Optimal refrigerantamount
Refrigerant charge amount
Insufficientrefrigerant charge
Excessiverefrigerant charge
Max.440 V
* Must use automatic refrigerant charge function. Refer to installation manual for details.
・Automatic completion by proper refrigerant amount・Monitoring refrigerant charging is unnecessary・No recalculation of charge amounts due to minor design changes locally
Automatic Refrigerant Charge
R-410A
The automatic refrigerant charge function automates the charging of the proper refrigerant amount and easy start by pressing one button.
Calculation of necessary refrigerant amount from design drawing
1 Start of automatic refrigerant charge operation
2
Improved performanceThe new DC motor designed with small-diameter bearing and improved efficiency during low-speed operation has improved seasonal efficiency.
High-capacity
swing structure
New DC motor
(high wire-efficiency winding/
high-efficiency magnet)
The new compressors offer higher performance compared to that of conventional scroll compressors.
New swing compressor
High efficiency, high capacity DC inverter swing compressor
73 74
The new VRV S High Efficiency Series outdoor unit has been achieved high external static pressure up to 40 Pa, realizing stable operation in small installation sites where the air direction adjustment grille or duct is used to avoid short circuits.
When discharged air is blocked by some obstacle, the optional air direction adjustment grille can divert the airflow to one of 4 directions (up, down, left or right) to avoid the obstacle.
The external static pressure automatic adjustment function maintains rated airflow and capacity by automatically adjusting the external static pressure during the test operation to suit the resistance of the installation site.
The new design has been optimised for the VRV S High Efficiency Series with the height of all models reduced to only 870 mm. This low height casing design provides occupants with a clear, unobstructed view of the scenery.
Previous VRV IV S series
Design Flexibility of InstallationNo short circuits Low height casing designHigh external static pressure up to 40 Pa and automatic adjustment of external static pressure
Optimum airflow direction with the optional air direction adjustment grille
Air direction adjustment grille (option)
When the obstacle is not avoidable by the air direction adjustment grille, installing a field-supplied duct can bypass the obstacle. In this way, installation of the outdoor unit is possible in places like behind an advertising board.
Airflow (m3/min)
Wind is diverted upwards.
Wind is diverted sideways.
4,5 HP 6 HP
990
mm
1,34
5 m
m
870mm
4-7 HP
1
2
3
Airflow decreases.
Airflow (rated)Airflow (rated)
Resistance increases when duct is installed in the site.
External static pressure (Pa)
Rated airflow is maintainedRated airflow is maintained.
Duct(Field supply)
Flange(Field supply)Duct installation to stabilize the system
VR
V S
Hig
h E
ffici
ency
Ser
ies
VRV S High Efficiency Series
The low height casing design allows for compact double-stacking of outdoor units to maximize utilization of installation space.
・Ideal solution that minimises both visual and sound impact・Can be installed in a wide variety of locations and applications・No space required for multiple outdoor units
Window
Outdoorunit
View from outside View from inside
Double-stacking installation possible
75 76
Actual piping length increased by 20% allows for various installation!
Installation for VRV indoor units only
Design Flexibility of Installation
100 m
Increased actual piping length up to 120 m*
120 m*
Installation on the rooftop of residential apartments
Previous VRV IV S series
Max. 40 m
Between the first indoor branch and the farthest indoor unit
Max. level difference between the indoor units
50 m
Max. level difference between the outdoor units and the indoor units
15 m
Note: The above is just a schematic diagram.
Max. equivalent piping length
150 m
120 m*
5-7 HP
Maximum allowable level difference
Maximum allowable piping length
Between the outdoor units and the indoor units
Between the indoor units
Between the first indoor branch and the farthest indoor unit
Total piping length
Actual piping length (Equivalent)
15 m
120 m* (150 m)
300 m
50 m
40 m
40 m
4 HP
10 m
120 m* (150 m)
300 m
50 m
40 m
40 m
If the outdoor unit is above.
If the outdoor unit is below.
Max. actual piping length
300 mMax. total piping length
VR
V S
Hig
h E
ffici
ency
Ser
ies
VRV S High Efficiency Series
* Must use automatic refrigerant charge function.Refer to installation manual for details.
Installation for mixed combination of VRV and residential indoor units
Installation on balconies of residential apartments
One outdoor unit can provide comfort for the whole house
Max. total piping length 300 m
Max. equivalent piping length
Max. actual piping length
Between the first indoor branch and the farthest VRV indoor unit
Max. level difference between the indoor units
15 m
15 m Max. level difference between the outdoor unit and the indoor unit
50 m
5 m
Note: The above is just a schematic diagram.
BP unit
RA
RA
RA
RA
VRV
BP unit
Max. 15 m
Between BP unit and indoor unitMax. level difference between the
outdoor unit and the BP units
40 m
Max. level difference between BP unit
Max. level difference between the BP unit and the indoor unit
VRV: VRV indoor unit RA: Residential indoor unit
Max. 40 m
Maximum allowablepiping length
Minimum allowable piping length
Maximum allowablelevel difference
Between the outdoor unitand the indoor unit
Between BP unit and indoor unit
Between the indoor units
Between BP units
Between the first indoor branch and the farthest BP unit or between the first indoor branch and the farthest VRV indoor unit
Total piping length
Actual piping length (Equivalent)
Between outdoor unit and the first indoor branch
If the outdoor unit is above.
If the outdoor unit is below.
If indoor unit capacity index < 60.
If indoor unit capacity index is 60.
If indoor unit capacity index is 71.
Between the outdoor unit and the BP unit
Between the BP unit and the indoor unit
120 m*
145 m
* Must use automatic refrigerant charge function.Refer to installation manual for details.
15 m
15 m
120 m* (145 m)
300 m
2 m–15 m
2 m–12 m
2 m–8 m
40 m
5 m
50 m
40 m
40 m
10 m
10 m
120 m* (145 m)
300 m
2 m–15 m
2 m–12 m
2 m–8 m
40 m
5 m
50 m
40 m
40 m
4 HP
5 m 5 m
5-7 HP
Cei
ling
Con
ceal
ed D
uct
Floo
r St
andi
ngCe
iling
Susp
ende
dC
ateg
ory
Cei
ling
Mou
nted
Cas
sett
e
Indoor Unit Lineup
77 78
Indoor units can be selected from 2 lineups, both VRV and residential indoor units, to match rooms and preferences.
Wide variety of indoor units
VRV indoor units VRT smart VRT
Indoor units subject to VRT smart control
Indoor units subject to VRT control
FXDSQ-AVM
FXSQ-PAVE
Capacity Range
Capacity Index 20
0.8 HP
20
1.6 HP
40
2.5 HP
63
3.2 HP
80
3 HP
71
4 HP
100
5 HP
125
6 HP
140
2 HP1.25 HP
32
62.531.25
1 HP
25
Type Model Name
FXFSQ-AVM
Ceiling Suspended
Wall Mounted
Floor Standing
Concealed Floor Standing
Outdoor-Air Processing Unit
FXVQ-NY1Floor Standing Duct
FXDQ-SPV1
FXMQ-MFV1
Heat Reclaim Ventilator VAM-GJVE Airflow rate 150-2000 m3/h
Clean Room Air ConditionerFXBQ-PVE
FXBPQ-PVE
FXEQ-AV36
FXFQ-AVM
FXZQ-AVM
FXCQ-AVM
FXMQ-PAVE
FXHQ-AVM
FXHQ-MAVE
FXAQ-AVM
FXLQ-MAVE
FXNQ-MAVE
FXDQ-PDVE(with drain pump)
FXDQ-PDVET(without drain pump)
FXDQ-NDVE(with drain pump)
FXDQ-NDVET(without drain pump)
(700 mm width type)
(900 / 1,100 mm width type)
50
40 8071 100 125 140
8 HP
200
20025 50
VRT smart
VRT smart
VRT smart
VRT smart
VRT smart
VRT smart
VRT smart
VRT smart
VRT smart
VRT smart
VRT smart
4-Way Flow Ceiling Suspended
FXUQ-AVEB VRT
VRT
VRT
VRT
VRT
VRT
VRT
VRT
Spot Air Conditioner VRT
VRT
VRT
VRT
Residential indoor units only
BP unit BP unit
VRV indoor units only
11Max.
indoor units
• If a system has indoor units subject to both VRT smart and VRT control, the system is operated under VRT control.• If a system has both outdoor-air processing air conditioners and outdoor-air processing type indoor units, VRT smart control and VRT control are disabled.
11Max.
indoor units
• BP units are necessary for residential indoor units.• If a system has only residential indoor units, the system is operated under VRT control.
3D Airflow Duct with Sensing
Middle Static Pressure Duct
Round Flow Cassette with Sensing
Round Flow Cassette
Compact Multi Flow Cassette
Double Flow Cassette
Single Flow Cassette
Slim Duct (Standard)
Middle-High Static Pressure Duct
FXMQ-PVM VRT smartHigh Static Pressure Duct
Slim Duct (Compact)
Residential indoor units with connection to BP units
Note: BP units are necessary for residential indoor units.
20
20
2.0
25 35
25 35
2.5 3.5
50 60 71
50 60 71
5.0 6.0 7.1Rated Capacity (kW)Type Model Name
Capacity Index
Slim CeilingConcealed Duct
Wall Mounted
(700 mm width type)
(900/1,100 mm width type)
Cooling Only
Heat Pump
FDKS-EAVMB
CDXS-EAVMA
Cooling Only
Heat Pump
FDKS-C(A)VMB
FDXS-CVMA
Cooling OnlyHeat PumpHeat Pump
FTKS-DVMFTXS-DVMAFTXS-EVMA
Cooling Only FTKS-BVMA
Cooling OnlyHeat Pump
FTKS-FVMFTXS-FVMA
VRT
VRT
VRT
VRT
VRTVRTVRT
VRT
VRT
VRT
FXPQ-AVN
New lineup
Cooling Only
Cooling Only
FTKJ-NVMVW
FTKJ-NVMVS
VRT
VRT
VR
V S
Hig
h E
ffici
ency
Ser
ies
VRV S High Efficiency Series
79 80
Heat PumpCooling Only
Outdoor Units
Note: Specifications are based on the following conditions;• Cooling: Indoor temp.: 27°CDB, 19°CWB, Outdoor temp.: 35°CDB, Equivalent piping length: 7.5 m, Level difference: 0 m.• Sound level: Anechoic chamber conversion value, measured at a point 1 m in front of the unit at a height of 1.5 m.
During actual operation, these values are normally somewhat higher as a result of ambient conditions and oil recovery mode.When there is concern for noise the surrounding area such as residences, we recommend investigating the installation location and taking soundproofing measures.
• Refrigerant charge is required.
Note: Total capacity index of connectable indoor units must be 50%–130% of the capacity index of the outdoor unit.
Specifications
Outdoor unit combinations
Specifications
Outdoor unit combinations
MODEL RSUQ4AVM RSUQ5AVM RSUQ6AVM RSUQ7AYM
kW 11.2 14.0 16.0 20.0
HP 4 5 6 7
Capacity index 100 125 150 175
Combination (%)
50% 50 62.5 75 87.5
100% 100 125 150 175
130% 130 162.5 195 227.5
Maximum number of connectable indoor units 6 8 9 11
Note: Specifications are based on the following conditions;• Cooling: Indoor temp.: 27°CDB, 19°CWB, Outdoor temp.: 35°CDB, Equivalent piping length: 7.5 m, Level difference: 0 m.• Heating: Indoor temp.: 20°CDB, Outdoor temp.: 7°CDB, 6°CWB, Equivalent piping length: 7.5 m, Level difference: 0 m.• Sound level: Anechoic chamber conversion value, measured at a point 1 m in front of the unit at a height of 1.5 m.
During actual operation, these values are normally somewhat higher as a result of ambient conditions and oil recovery mode.When there is concern for noise the surrounding area such as residences, we recommend investigating the installation location and taking soundproofing measures.
• Refrigerant charge is required.
MODEL RSUYQ4AVM RSUYQ5AVM RSUYQ6AVM RSUYQ7AYM
kW 11.2 14.0 16.0 20.0
HP 4 5 6 7
6 8 9 11
Capacity index 100 125 150 175
Combination (%) 80%*2 80 100 120 140
50%*1 50 62.5 75 87.5
100% 100 125 150 175
130% 130 162.5 195 227.5
Maximum number of connectable indoor units
MODEL RSUQ4AVM RSUQ5AVM RSUQ6AVM RSUQ7AYM
Power supply 1-phase, 220-240 V/220-230 V, 50/60 Hz 3-phase, 380-415 V/380 V, 50/60 Hz
Cooling capacity Btu/h 38,200 47,800 54,600 68,200
kW 11.2 14.0 16.0 20.0
Power consumption kW 2.49 3.44 4.10 5.46
Capacity control % 23 to 100 16 to 100 9 to 100
Casing colour
Compressor Type
Motor output kW 2.0 3.1 3.5
Airflow rate m3/min 87 84 87
mm 870×1,100×460
Machine weight kg 95 98 115
58Sound level dB(A) 51 52
Operation range °CDB -5 to 52
4.24.0Refrigerant
Type R-410A
Charge kg 5.4
Piping connections Liquid mm
Gas mm 15.9 (Flare)
MODEL RSUYQ4AVM RSUYQ5AVM RSUYQ6AVM RSUYQ7AYM
Power supply 1-phase, 220-240 V/220-230 V, 50/60 Hz 3-phase, 380-415 V/380 V, 50/60 Hz
Cooling capacity Btu/h 38,200 47,800 54,600 68,200
42,700 54,600 61,400 76,400
kW 11.2 14.0 16.0 20.0
12.5 16.0 18.0 22.4Heating capacity
Btu/h
kW
Cooling kW 2.49 3.44 4.10 5.46
Heating kW 2.54 3.37 3.98 5.10
Capacity control % 23 to 100 15 to 100 9 to 100
Casing colour
Compressor Type
Motor output(Cooling / Heating) kW 2.0/2.4 3.1/3.6 3.5/4.0
Airflow rate Cooling m3/min
m3/min
87 84 87
Dimensions (H×W×D) mm 870×1,100×460
Machine weight kg 95 98 120
Sound level (Cooling/Heating) dB(A) 51/52 52/54 58/61
Operation range Cooling °CDB -5 to 52
Heating °CWB -20 to 15.5
Refrigerant Type R-410A
Charge kg 4.0 4.2 5.4
Piping connections Liquid mm
Gas mm 15.9 (Flare)
Ivory white (5Y7.5/1)
Hermetically sealed swing type
1.9
123 Ivory white (5Y7.5/1)
Hermetically sealed swing type
1.9/2.3
123
Heating 90 84 94 137
Dimensions (H×W×D)
9.5 (Flare)
9.5 (Flare)
19.1 (Brazing)
19.1 (Brazing)
Power consumption
Total capacity index of connectable indoor units
Notes: 1. When only VRV indoor units are connected, total capacity index of connectable indoor units must be 50%-130% of the capacity index of the outdoor unit.2. When a mixed combination of VRV and residential indoor units is connected or when only residential indoor units are connected, total capacity index
of connectable indoor units must be 80%-130% of the capacity index of the outdoor unit.
Total capacity index of connectable indoor units
VR
V S
Hig
h E
ffici
ency
Ser
ies
VRV S High Efficiency Series
VRV S High Efficiency Series
VR
V IV
S S
erie
s
81 82
VRV IV S Series
Compact & lightweight design
The VRV IV S series is slim and compact, with outdoor units that require minimal installation space.
940 mm
990 mm
320 mm 940 mm
1,430 mm
320 mm
4 HP 5 HP 6 HP 8 HP / 9 HP
71 kgProduct Weight 76 kg* 78 kg* 131 kg*990 mmHeight 990 mm 990 mm 1,430 mm
0.30 m2Footprint 0.30 m2 0.30 m2 0.30 m2
8HP / 9HP4HP — 6HP
The Ideal Air Conditioning System for Residential Houses, Small Offices and Shops 4HP–9HP
(11.2 kW) (24 kW)
Cooling OnlyHeat Pump
Co
olin
g O
per
atio
n E
ER
VRV III S VRV IV S Series
High Energy Efficiency Ratio (EER)
VRV IV S series provides greater energy saving as compared to VRV III S series.
Energy saving
0
3.2
3.4
3.6
3.8
4
4 HP(11.2 kW)
5 HP(14.0 kW)
6 HP(16.0 kW)
8 HP(22.4 kW)
9 HP(24.0 kW)
*Cooling operation conditions: Indoor temp. of 27º CDB,19º CWB, and outdoor temp. of 35º CDB.
*For cooling only models
3.89
3.55
3.77
3.49
3.66
Cooling Only
RXMQ4AVERXMQ5-6BVMRXMQ8-9AY1
Heat Pump
RXYMQ4AVERXYMQ5-6BVMRXYMQ8-9AY1
83 84
VR
V IV
S S
erie
s
VRV IV S Series
Technologies for efficient and quiet operation
Swing compressor (4-6 HP model only)
Comfort and Simplified Installation
Quiet operation
Nighttime quiet operation function
The nighttime quiet operation function automatically suppresses the nighttime operating sound by reducing operation capacity to maintain the quiet environment of the neighborhood. Three selectable modes are available depending on the required level. This function is suitable for use in residential areas.
Daikin swing compressor has integrated the rotor with the blade, completely solving the refrigerant leakage and the wear problem caused by the mechanical friction between the rotor and the blade, which enhances the compressor efficiency and makes the compressor more quiet and durable.
DC fan motor
Efficiency improved in all areas compared to conventional AC motors, especially at low speeds.
Smooth air inlet bell mouth and aero spiral fan
The smooth air inlet bell mouth and the aero spiral fan work to minimize turbulence in the airflow and reduce sound.
The structural scroll (8-9 HP model only)
Sucked gas is compressed in the scrolling part before the heated motor, so that the machine compress the non-expanded gas, resulting in high efficiency compression.
Swing compressor
Peak in the outdoortemperature
8 hrs 10 hrs
8:00 12:00 16:00 20:00 0:00 4:00 8:00
50%
100%
Night mode ENDSNight mode STARTS
Night quiet mode
Min. 43 dB(A)43 dB(A)
52 dB(A)
Load %
Operating sound dB(A)
Scroll section
Suction
DischargeMotorsection
Notes: • This function is available in setting at site.• The operating sound in quiet operation mode is the actual value measured by our
company. • The relationship of outdoor temperature (load) and time shown above is just an
example.• In case of 4 HP outdoor unit
8, 9 HP
4-6 HP
Scroll compressor
When only VRV indoor units are connected
Long piping length offers flexibility in the choice of installation positions, and simplifies system planning.
When a mixed combination of VRV and residential indoor units is connected
Makes the long piping design possible
Max. allowable level difference
Max. allowable piping length
Between the outdoor unitand the indoor unit
Between the indoor units
Between the first indoor branch and the farthest indoor unit
Total piping length
Refrigerant piping length (Equivalent)
j
a+b+c+d+e+f+g+h+i
a+b+c+d+i
b+c+d+i
50 m (65 m)
250 m
40 m
4 HP
100 m (130 m)
300 m
40 m
5,6 HP
kIf the outdoor unit is aboveIf the outdoor unit is below k
10 m
30 m
30 m
15 m
30 m
30 m
70 m (90 m)
300 m
40 m
8,9 HP
15 m
50 m
40 m
Max. allowable piping length
Max. & min. allowable piping length
Min. allowable piping length
Max. allowable level difference Outdoor unit -
the indoor unit
BP unit - indoor unit
Between the indoor units
Between BP units
The first indoor branch - the farthest BP or VRV indoor unit
Total piping length
Refrigerant piping length (Equivalent)
Outdoor unit - the first indoor branch
10 m
10 m
l
m
n
n
o
a+b+c+d+e+f+g+h+i+j+k
b+c+g, b+c+d
a+b+c+g+k, a+b+c+d
h, i, j, k
a
50 m (65 m)
250 m
40 m
2 m–15 m
2 m–12 m
2 m–8 m
5 m
30 mIf the outdoor unit is aboveIf the outdoor unit is below
If indoor unit capacity index < 60
If indoor unit capacity index is 60
If indoor unit capacity index is 71
30 m
30 mOutdoor unit - the BP unit
4 HP
15 m
15 m
70 m (90 m)
250 m
40 m
2 m–15 m
2 m–12 m
2 m–8 m
5 m
30 m
30 m
30 m
5,6 HP
15 m
15 m
100 m (125 m)
250 m
40 m
2 m–15 m
2 m–12 m
2 m–8 m
5 m
50 m
40 m
40 m
8,9 HP
Max. 100 m
Actual piping length
Max. 300 m
Total piping length
Max. 130 m
Equivalent piping length
Max. 100 m
Actual piping length
Max. 250 m
Total piping length
Max. 125 m
Equivalent piping length
Max.
50 m
Max.
15 m
a
i
j
k
dcbhgfe
First indoor branch
Max.
50 m
Max.
40 mMax.
15 m
Max.
15 m
a
o
l
n
dcbgfe
First indoor branch
mh ij
k
BP
RA RA
RA
VRV
VRV
BP
RA
85 86
VR
V IV
S S
erie
s
VRV IV S SeriesFl
oor
Stan
ding
Ceilin
g Su
spen
ded
Cat
egor
yC
eilin
g M
ount
ed C
asse
tte
Cei
ling
Con
ceal
ed D
uct
3D Airflow Duct with Sensing
Middle Static Pressure Duct
Round Flow Cassette with Sensing
Round Flow Cassette
Compact Multi Flow Cassette
Double Flow Cassette
Single Flow Cassette
Slim Duct (Standard)
Middle-High Static Pressure Duct
High Static Pressure Duct
Slim Duct (Compact)
A mixed combination of VRV indoor units and residential indoor units can be combined into one system, opening the door to stylish and quiet indoor units.
Indoor Unit Lineup
Enhanced range of choices
VRV indoor units
FXDSQ-AVM
FXSQ-PAVE
Capacity Range
Capacity Index 20
0.8 HP
20
1.6 HP
40
2.5 HP
63
3.2 HP
80
3 HP
71
4 HP
100
5 HP
125
6 HP
140
2 HP1.25 HP
32
62.531.25
1 HP
25
Type Model Name
FXFSQ-AVM
Ceiling Suspended
Wall Mounted
Floor Standing
Concealed Floor Standing
Outdoor-Air Processing Unit
FXVQ-NY1Floor Standing Duct
FXDQ-SPV1
FXMQ-MFV1
Heat Reclaim Ventilator VAM-GJVE Airflow rate 150-2000 m3/h
Clean Room Air ConditionerFXBQ-PVE
FXBPQ-PVE
Spot Air Conditioner
FXEQ-AV36
FXFQ-AVM
FXZQ-AVM
FXCQ-AVM
FXMQ-PAVE
FXHQ-AVM
FXHQ-MAVE
FXAQ-AVM
FXLQ-MAVE
FXNQ-MAVE
FXDQ-PDVE(with drain pump)
FXDQ-PDVET(without drain pump)
FXDQ-NDVE(with drain pump)
FXDQ-NDVET(without drain pump)
(700 mm width type)
(900/1,100 mm width type)
50
40 8071 100 125 140
8 HP
200
10 HP
250
200 25025 50
VRV indoor units combine with residential indoor units, all in one system.
* Refer to page 87 - 88 for the maximum number of connectable indoor units.
VRV indoor units
BP unit
Residential indoor units
VRV indoor units only
20
20
2.0
25 35
25 35
2.5 3.5
50 60 71
50 60 71
5.0 6.0 7.1Rated Capacity (kW)Type Model Name
Capacity Index
Slim CeilingConcealed Duct
Wall Mounted
(700 mm width type)
(900/1,100 mm width type)
Note: BP units are necessary for residential indoor units.
Cooling Only
Heat Pump
FDKS-EAVMB
CDXS-EAVMA
Cooling Only
Heat Pump
FDKS-C(A)VMB
FDXS-CVMA
Cooling Only
Heat Pump
FTKS-FVM
FTXS-FVMA
Cooling OnlyHeat PumpHeat Pump
FTKS-DVMFTXS-DVMAFTXS-EVMA
Cooling Only FTKS-BVMA
Cooling Only
Heat Pump
FTKJ-NVMVW
FTXJ-NVMVW
Cooling Only
Heat Pump
FTKJ-NVMVS
FTXJ-NVMVS
Residential indoor units with connection to BP units
FXPQ-AVN
4-Way Flow Ceiling Suspended FXUQ-AVEB
14Max.
indoor units
14Max.
indoor units
New lineup
FXMQ-PVM
VR
V IV
S S
erie
s
87 88
VRV IV S Series
38,200
11.2
2.88
24 to 100
47,800
14.0
3.83
54,600
16.0
4.51
Ivory white (5Y7.5/1)
RXMQ4AVE RXMQ5BVM RXMQ6BVM RXMQ8AY1 RXMQ9AY1
15 to 100
Btu/h
kW
kW
%
kW
m3/min
mm
kg
dB(A)
°CDB
kg
mm
Casing colour
Compressor
Airflow rate
Machine weight
Sound level
Operation range
Refrigerant
Piping connections
Power supply
Cooling capacity
MODEL
Dimensions (H×W×D)
Type
Motor output
Type
Charge
Liquid
Gas
Power consumption
Capacity control
Hermetically sealed swing type
3.7
-5 to 46
R-410A
3.21.92
76 81
71 76
53
80
78
5552
3.4 4.02.9
9.5 (Flare)
15.9 (Flare)
1-phase, 220-240 V/220-230 V, 50/60 Hz 1-phase, 220-230 V/220 V, 50/60 Hz
Notes: Specifications are based on the following conditions;• Cooling: Indoor temp.: 27° CDB, 19° CWB, Outdoor temp.: 35° CDB, Equivalent piping length: 7.5 m, Level difference: 0 m.• Sound level: Anechoic chamber conversion value, measured at a point 1 m in front of the unit at a height of 1.5 m.
During actual operation, these values are normally somewhat higher as a result of ambient conditions and oil recovery mode.When there is concern for noise the surrounding area such as residences, we recommend investigating the installation location and taking soundproofing measures.
• Refrigerant charge is required.
Outdoor Units
Specifications
VRV IV S Series
76,400
22.4
5.94
81,900
24.0
6.88
20 to 100
Hermetically sealed scroll type
4.83.8
140
1,430×940×320
131
5.8
57 58
9.5 (Brazing)
19.1 (Brazing) 22.2 (Brazing)
3-phase, 380–415 V, 50 Hz
RXMQ4AVE RXMQ5BVM RXMQ6BVM
11.2
4
100
50
100
130
6
14.0
5
125
62.5
125
162.5
8
16.0
6
150
75
150
195
9
50%
100%
130%
kW
HP
Capacity index
Total capacity index of connectable indoor units
Maximum number of connectable indoor units
MODEL
Outdoor unit combinationsRXMQ8AY1
22.4
8
200
100
200
260
13
RXMQ9AY1
24.0
9
215
107.5
215
280
14
Note: Total capacity index of connectable indoor units must be 50%–130% of the capacity index of the outdoor unit.
Combination (%)
990×940×320
38,200
11.2
42,700
12.5
2.88
2.60
47,800
14.0
47,800
14.0
3.83
3.04
54,600
16.0
54,600
16.0
4.51
3.59
Ivory white (5Y7.5/1)
RXYMQ4AVE RXYMQ5BVM RXYMQ6BVM
24 to 100
Hermetically sealed swing type
15 to 100
3.7
80
80
55/56
-5 to 46
-20 to 15.5
R-410A
3.2/3.5
81
1.92
76
990×940×320
71 78
53/5452/54
3.4 4.02.9
Btu/h
kW
Btu/h
kW
kW
%
kW
m3/min
mm
kg
dB(A)
°CDB
°CWB
kg
mm
Casing colour
Compressor
Airflow rate
Machine weight
Sound level (Cooling/Heating)
Operation range
Refrigerant
Piping connections
Power supply
Heating capacity
Cooling capacity
MODEL
Cooling
Heating
Cooling
Heating
Type
Charge
Liquid
Gas
Dimensions (H×W×D)
Type
Motor output(Cooling/Heating)
Power consumption
Capacity control
9.5 (Flare)
15.9 (Flare)
1-phase, 220-230 V/220 V, 50/60 Hz 1-phase, 220-240 V/220-230 V, 50/60 Hz
RXYMQ4AVE RXYMQ5BVM RXYMQ6BVM
11.2
4
100
50
80
100
130
6
14.0
5
125
62.5
100
125
162.5
8
16.0
6
150
75
120
150
195
9
50%*1
80%*2
100%
130%
kW
HP
Capacity index
Total capacity index of connectable indoor units
Maximum number of connectable indoor units
MODEL
Combination (%)
Notes: Specifications are based on the following conditions;• Cooling: Indoor temp. : 27° CDB, 19° CWB, Outdoor temp. : 35° CDB, Equivalent piping length: 7.5 m, Level difference: 0 m.• Heating: Indoor temp.: 20° CDB, Outdoor temp.: 7° CDB, 6° CWB, Equivalent piping length: 7.5 m, Level difference: 0 m.• Sound level: Anechoic chamber conversion value, measured at a point 1 m in front of the unit at a height of 1.5 m.
During actual operation, these values are normally somewhat higher as a result of ambient conditions and oil recovery mode.When there is concern for noise the surrounding area such as residences, we recommend investigating the installation location and taking soundproofing measures.
• Refrigerant charge is required.
Notes: *1 : When only VRV indoor units are connected, total capacity index of connectable indoor units must be 50%-130% of the capacity index of the outdoor unit.*2 : When a mixed combination of VRV and residential indoor units is connected or when only residential indoor units are connected, total capacity index of connectable
indoor units must be 80%-130% of the capacity index of the outdoor unit.
Specifications
Outdoor unit combinations
Heat Pump
RXYMQ8AY1
22.4
8
200
100
160
200
260
13
RXYMQ9AY1
24.0
9
215
107.5
172
215
280
14
76,400
22.4
85,300
25.0
5.94
6.25
81,900
24.0
88,700
26.0
6.88
6.82
RXYMQ8AY1 RXYMQ9AY1
20 to 100
Hermetically sealed scroll type
4.83.8
140
1,430×940×320
138
5.8
57/58 58/59
9.5 (Brazing)
19.1 (Brazing) 22.2 (Brazing)
3-phase, 380–415 V, 50 Hz
Cooling Only
89 90
VR
V IV
Q S
erie
s
VRV IV Q Series
Special equipment and work is no longer required to clean pipes. A new function automatically deals with contamination inside piping during refrigerant charging, eliminating the work involved in cleaning.
The VRV IV Q Series concept
Quick, quality and economical replacement
Reuse
Simple use of existing refrigerant piping
Even applicable for non-DAIKIN systems! The Daikin low-cost upgrade solution
Reuse drain pipes
Reuse refrigerant branch pipesThere are no restrictions when upgrading from a Daikin VRV system. Other VRF systems require branch pipes withstand pressure up to 3.3 MPa.
Reuse refrigerant pipesPipes used for R-22 will also work with VRV IV Q series.
Replace indoor units
Reuse remote control and indoor-outdoor wiringReuse wiring when upgrading from a Daikin VRV system.In other cases, this will depend on the cable type.
Replace outdoor units
Reusing existing refrigerant piping
minimizes installation time and cost
Improvement in capacity
and greater number of indoor units
An automatic refrigerant charge function enables
high quality installation
For Quick & High Quality Replacement Use
6HP–48HP
Cooling OnlyHeat Pump
(16 kW) (135 kW)
Single outdoor units
RQ(Y)Q6-16TYM(1)(E)
Double outdoor units
RQ(Y)Q18-32TNYM(1)(E)
Triple outdoor units
RQ(Y)Q34-48TNYM(1)(E)
Single outdoor units
RQ(Y)Q18-20TYM(1)(E)
Double outdoor units
RQ(Y)Q30-40TSYM(1)(E)
Triple outdoor units
RQ(Y)Q42-48TSYM(1)(E)
* (E) : anti-corrosion model
Standard Type Space Saving Type
91 92
VR
V IV
Q S
erie
s
VRV IV Q Series
Time savingEnables smooth replacement of air conditioning with less effect on operations and users in the building.
Significantly more compact outdoor unit enables the effective use of limited space!Refrigerant charging, cleaning and test operation done with just a single switch.
More indoor units can be connected in a single system, enabling consolidation of existing piping!
Compact design enables the effective use of space taken up by existing machinery
An increased number of connectable indoor units in a single system
Automatic Design flexibility
High external static pressure 78.4 Pa
System flexibility
Cost savingBy the reuse of existing piping, 35% of cost down can be realized compared to installing new pipes.
The automatic refrigerant charge function automates the charging of the proper refrigerant amount and the closing of shut-off valves by simply pressing a switch after pre-charging.Furthermore, there is no need to clean inside piping as this is handled automatically by the VRV IV Q unit.
* There are conditions in the range (ambient temperature, connection ratio) in which the automatic refrigerant charge can be used. Refer to the installation manual for details. The refrigerant amount that can be automatically charged may differ from the additional refrigerant amount that is provided from calculations, but there are no problems in performance and quality.
Cost details (10 HP example)
Piping
Duct
CuringOverheads
Equipment installation
Removal work
Refrigerant charge
40%
10%
10%
10%
8%4%
20%
20%
10%
10%
10%
4%
6%
New pipe installation VRV IV Q series
Approx.
–35%
Great reduction of work cost
Conventional solution
Refrigerant recovery and units removal
Carry-in and installation of units
Airtightness test
Vacuum drying
Quicker and higher qualityinstallation
Removal of existing piping
Installation of new piping and wiring
Refrigerant charging and volume measurement
Test operation
1
4
5
6
2
3
7
8
Refrigerant recovery and units removal
Airtightness test
Vacuum drying
Automatic
Reuse of existing refrigerant piping
Carry-in and installation of units
1
4
5
6
2
3
Quicker
Quicker
VRV IV Q seriesfor Replacement use
3,005 mm 750 mm
ConventionalVRV K PLUS series: RX(Y)20K20 HP outdoor unit
Installation space
Installation space
2.25m2
0.95m2
20 HP outdoor unitVRV IV Q : RQ(Y)Q20T
1,240 mm 765 mm
Conventional VRV K PLUS series: RX(Y)24–30K
49.0Pa
VRV IV QConventionalVRV K series
58%less space
indoor unitsconnectableUp to 30
VRV IV Q : RQ(Y)Q40–48T
indoor unitsconnectableUp to 64
Benefits of System Replacement
78.4 Pa
3%
Refrigerant charge, refrigerant pipe cleaning, test operation
93 94
VR
V IV
Q S
erie
s
VRV IV Q Series
Outer Rotor DC Motor (ODM)
Only Daikin has adapted an ODM with the feature of stable rotation and volumetric efficiency.
Benefits of System Replacement
New tested contamination collection methodA new method collects contamination from existing piping, eliminating compressors and electric valves malfunction.
Enables increased capacity
Energy saving
Higher Energy Efficiency Ratio (EER)
VRT Control for optimal annual efficiency
Reliable and stable technology
New technology that enables use of existing piping
High reliability at high ambient temperatures
PCB
Power Module
RefrigerantRefrigerant JacketHeat
Refrigerant
Using refrigerant to cool the inverter power module helps minimise the size of the electronic components, and this results in reduction of airflow resistance and high efficiency of the heat exchanger.
This enables
UNIQUE
F
Rotor
SMT* packaging technology
• Improves the anti-clutter performance.• Protects your computer boards from the adverse effects of sandy climates and humid weather.
*SMT: Surface mounted technology
SMT packaging material
Computer control board
Computer control board surface adopting SMT packaging technology
Control board failure ratio at stable operation is reduced.
• Suitability for high ambient temperatures• Miniaturization of electronic components
VRV IV Q series only VRV IV Q series for replacement use enables the system capacity to be increased without changing the refrigerant piping. For example, it is possible to install a 16 HP VRV IV Q series using the refrigerant piping of an 10 HP R-22 system.
Acid Impurities Iron powderAn acid neutraliser agent is added to disable acids (chlorine ions), which cause corrosion.
A generously sized filter is provided inside the refrigerant circuit which traps impurities.
A magnet is installed inside the accumulator where liquid refrigerant accumulates. The magnet attracts iron powder to keep the system clean.
Acid (chlorine ion)
Refrigerant pipe
Acid neutraliser
AccumulatorIron powder
To compressor
Refrigerant flow
Filter
Iron powder, etc
Impurities
Magnet
Reuse of existing piping
Pipe size: 28.6, 12.7
Pipe size: 28.6, 12.7
* Cooling operation conditions: Indoor temp. of 27º CDB, 19º CWB, and outdoor temp. of 35º CDB.
VRV IV Q series delivers highly efficient performance, contributing to high energy savings.
VRT automatically adjusts refrigerant temperature to individual building and climate requirement, thus further improving annual energy efficiency and maintaining comfort.
VRV K(A): RSX-K(A) VRV II: RX-M VRV IV Q Series
4.0
3.0
5.0
2.0
1.0
0
Co
olin
g O
per
atio
n E
ER
8 HP6 HP 10 HP 12 HP 14 HP 16 HP 18 HP 20 HP
81% increase(Compared with 8 HP model of VRV K(A) )
4.324.414.07
3.80 3.743.46 3.25 3.11
2.5HP×4 units
4.0HP×4 units
Before replacement
10HP
After replacement
16HP
VRV IV Q Series
Replace Replace
ODM (Outer Type)Conventional Motor(Inner Type)
F
Rotor HIGH TORQUEwith low energy
MORE efficient
95 96
VR
V IV
Q S
erie
s
VRV IV Q Series
p
q
k
First outdoor branch
fab
Firstindoor branch
*The rest of indoor units are the same as for single use.
First indoor branch
Single use
Multiple use
Colours in the diagram above are merely for identifying pipes referenced with symbols such as a .
Maximumallowablelevel difference
Maximumallowablepiping length
Between the outdoor unitsand the indoor units
Between the indoor units
Between the outdoor units (Multiple use)
Between the first indoor branch and the farthest indoor unit
Between the outdoor branch and the last outdoor unit (Equivalent)
Total piping length
Actual refrigerant piping length (Equivalent)
15 m
5 m q
s
a+b+c+d+e+f+g+h+i
a+f+g+h+i
f+g+h+i
k+p
150 m (175 m)
300 m
40 m
10 m (13 m)
Piping length Example
Level Difference Example
50 m rIf the outdoor unit is above.
If the outdoor unit is below. 40 m r
6 HP 8 HP10 HP12 HP14 HP16 HP18 HP20 HP22 HP24 HP26 HP28 HP30 HP32 HP34 HP36 HP38 HP40 HP42 HP44 HP46 HP48 HP
< 100100 ≤ X < 150150 ≤ X < 160160 ≤ X < 200200 ≤ X < 290290 ≤ X < 330330 ≤ X < 420420 ≤ X < 480480 ≤ X < 640640 ≤ X < 900900 ≤ X < 920
920 ≤ 20–40 class
50 class63-80 class
100–125 class140 class200 class250 class400 class500 class
: Piping size of conventional R-22 model: Piping size of conventional R-410A model: Standard piping size of VRV IV Q series: Possible: Standard piping size of VRV IV Q series. However, when equivalent piping length between outdoor unit and indoor unit is 90 m or more, size of main piping must be increased.: Not possible
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXX
XXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXX
XXXX
XXXXXXXXXXXXXXXXXXXX
XXXXXXXXXX
XXX
XXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXX
XXXXXXXXX
XXXXXXXXXXXXXXXXX
XXXXXXXX
XXX
XXXXXXXXXXXX
XXXXXXXX
XXXXXXXXX
XXXXXXXXX
XXXXXXXXX
XXXXXXXXXXXXXXX
XXXXXXXXX
XXXXXXXXX
XXXXXXXXXXXXXXXXXXX
XXXXXXX
XXXXXX
XXXXXXX
XXXXXXXX
XXXXXXXXXX
XXXXXXXXX
XXXXXXXXX
XXXXXXXXXXXXXXXX
XXXXXXX
XXXXXXXXXXXXXXXX
XXXXXXXXXX
X
6.4 9.5 12.7 15.9
Liquid
Piping size
Gas
19.1 22.2 12.7 15.9 19.1 22.2 25.4 28.6 34.9 41.3 54.1
Type of piping
Main piping
From REFNETto REFNET *1
From REFNETto indoor unit*2
Capacity
Reusability of existing piping for VRV IV Q seriesPiping limits for reuse of existing piping
XX
XX
XX
SSS
SSS
SSSS
S
SS
SSSSSSSSSSS
SSSSSSS
SSSSSS
SSSSSSS
SS
SS
SS
SS
S
SSS
SSSSS
SS
SS
SSS
SS
SS
SS
SS
SSSSS
SS
SS
S
S
a
i
s
r
hgf
edcb
*1 Piping between REFNETs depends on total capacity index of indoor units connected below each REFNET. It cannot exceed piping size of upstream side.*2 Piping from REFNET to indoor unit depends on the capacity of the connected indoor unit. It cannot exceed piping size of upstream side.
Max. 150 m
Actual piping length
Max. 175 m
Equivalent piping length
Max. 300 m
Total piping length
Guidelines for Reuse of Existing Refrigerant Piping
97 98
VR
V IV
Q S
erie
s
VRV IV Q Series
Floo
r St
andi
ngCe
iling
Susp
ende
dC
ateg
ory
Cei
ling
Mou
nted
Cas
sett
eC
eilin
g C
once
aled
Duc
t
Outdoor unit combinations
Outdoor Unit Lineup Indoor Unit Lineup
Enhanced lineup to 2 types Wide variety of indoor units
FXDSQ-AVM
FXSQ-PAVE
Capacity Range
Capacity Index 20
0.8 HP
20
1.6 HP
40
2.5 HP
63
3.2 HP
80
3 HP
71
4 HP
100
5 HP
125
6 HP
140
8 HP
200
10 HP
250
2 HP1.25 HP
32
62.531.25
1 HP
25
Type Model Name
FXFSQ-AVM
Ceiling Suspended
Wall Mounted
Floor Standing
Concealed Floor Standing
4-Way Flow Ceiling Suspended
Outdoor-Air Processing Unit
FXVQ-NY1
FXVQ-NY16(high static pressure type)
Floor Standing Duct
FXDQ-SPV1
400
16 HP
500
20 HP
FXMQ-MFV1
Heat Reclaim Ventilator
Heat Reclaim Ventilator with DX-Coil and Humidifier VKM-GA(M)V1
VAM-GJVE
Airflow rate 500-1000 m3/h
Airflow rate 150-2000 m3/h
FXEQ-AV36
FXFQ-AVM
FXCQ-AVM
FXMQ-PAVE
FXMQ-PVM
FXHQ-AVM
FXUQ-AVEB
FXHQ-MAVE
FXAQ-AVM
FXLQ-MAVE
FXNQ-MAVE
FXDQ-PDVE(with drain pump)
FXDQ-PDVET(without drain pump)
FXDQ-NDVE(with drain pump)
FXDQ-NDVET(without drain pump)
(700 mm width type)
(900/1,100 mm width type)
50
40 8071 100 125 140 200 25025 400 50050
Maximum number ofconnectable indoor units*2
Total capacity index of connectable indoor units*3
HP Combination
RQ(Y)Q18T
RQ(Y)Q20T
RQ(Y)Q12T + RQ(Y)Q18T
RQ(Y)Q12T + RQ(Y)Q20T
RQ(Y)Q16T + RQ(Y)Q18T
RQ(Y)Q18T x 2
RQ(Y)Q18T + RQ(Y)Q20T
RQ(Y)Q20T x 2
RQ(Y)Q12T x 2 + RQ(Y)Q18T
RQ(Y)Q12T x 2 + RQ(Y)Q20T
RQ(Y)Q12T + RQ(Y)Q16T + RQ(Y)Q18T
RQ(Y)Q12T + RQ(Y)Q18T x 2
225 to 585
250 to 650
375 to 975
400 to 1,040
425 to 1,105
450 to 1,170
475 to 1,235
500 to 1,300
525 to 1,365
550 to 1,430
575 to 1,495
600 to 1,560
Model name
RQ(Y)Q18T
RQ(Y)Q20T
RQ(Y)Q30TS
RQ(Y)Q32TS
RQ(Y)Q34TS
RQ(Y)Q36TS
RQ(Y)Q38TS
RQ(Y)Q40TS
RQ(Y)Q42TS
RQ(Y)Q44TS
RQ(Y)Q46TS
RQ(Y)Q48TS
18
20
30
32
34
36
38
40
42
44
46
48
29
32
48
52
55
58
61
64
Outdoor unit multi connection piping kit*1
–
–
BHFP22P151
BHFP22P100
Capacityindex
450
500
750
800
850
900
950
1,000
1,050
1,100
1,150
1,200Notes: *1. For multiple connection of 30 HP and above the outdoor unit multi connection piping kit (separately sold) is required.
*2. Total capacity index of connectable indoor units must be 50%–130% of the capacity index of the outdoor units.*3. When outdoor-air processing units and standard indoor units are connected, the total connection capacity index of the outdoor-air processing units
must not exceed 30% of the capacity index of the outdoor units. And the connection ratio must not exceed 100%.
kW
50.0
56.0
83.5
89.5
95.0
100
106
112
117
123
129
134
Standard Type
Space Saving Type
200
150 —
—
100 to 260
75 to 195
13
9
250 — 125 to 325 16
300 — 150 to 390 19
350 — 175 to 455 22
400 — 200 to 520 26
450 225 to 585 29
500 250 to 650 32
550 275 to 715 35
600 BHFP22P100
300 to 780 39
650 325 to 845 42
700 350 to 910 45
750 375 to 975 48
800 400 to 1,040 52
850 425 to 1,105 55
900 450 to 1,170 58
950 475 to 1,235 61
64
1,000 500 to 1,300
1,050 525 to 1,365
1,100 550 to 1,430
1,150
BHFP22P151
575 to 1,495
1,200 600 to 1,560
Notes: *1. For multiple connection of 18 HP systems and above, the outdoor unit multi connection piping kit (separately sold) is required.*2. Total capacity index of connectable indoor units must be 50%–130% of the capacity index of the outdoor units.*3. When outdoor-air processing units and standard indoor units are connected, the total connection capacity index of the outdoor-air processing units
must not exceed 30% of the capacity index of the outdoor units. And the connection ratio must not exceed 100%.
Capacity indexHP Model name Combination Outdoor unit multi
connection piping kit*1Total capacity index of
connectable indoor units*3Maximum number of
connectable indoor units*2
8
6
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
22.4
16.0
28.0
33.5
40.0
45.0
50.4
55.9
61.5
67.0
73.5
78.5
85.0
90.0
95.0
101
106
112
119
124
130
135
kW
RQ(Y)Q6T
RQ(Y)Q8T
RQ(Y)Q10T
RQ(Y)Q12T
RQ(Y)Q14T
RQ(Y)Q16T
RQ(Y)Q18TN
RQ(Y)Q20TN
RQ(Y)Q22TN
RQ(Y)Q24TN
RQ(Y)Q26TN
RQ(Y)Q28TN
RQ(Y)Q30TN
RQ(Y)Q32TN
RQ(Y)Q34TN
RQ(Y)Q36TN
RQ(Y)Q38TN
RQ(Y)Q40TN
RQ(Y)Q42TN
RQ(Y)Q44TN
RQ(Y)Q46TN
RQ(Y)Q48TN
RQ(Y)Q6T
RQ(Y)Q8T
RQ(Y)Q10T
RQ(Y)Q12T
RQ(Y)Q14T
RQ(Y)Q16T
RQ(Y)Q8T + RQ(Y)Q10T
RQ(Y)Q8T + RQ(Y)Q12T
RQ(Y)Q10T + RQ(Y)Q12T
RQ(Y)Q12T × 2
RQ(Y)Q12T + RQ(Y)Q14T
RQ(Y)Q12T + RQ(Y)Q16T
RQ(Y)Q14T + RQ(Y)Q16T
RQ(Y)Q14T + RQ(Y)Q18T
RQ(Y)Q10T + RQ(Y)Q12T × 2
RQ(Y)Q12T × 3
RQ(Y)Q8T + RQ(Y)Q12T + RQ(Y)Q18T
RQ(Y)Q12T × 2 + RQ(Y)Q16T
RQ(Y)Q12T + RQ(Y)Q14T + RQ(Y)Q16T
RQ(Y)Q12T + RQ(Y)Q16T × 2
RQ(Y)Q14T × 2 + RQ(Y)Q18T
RQ(Y)Q14T + RQ(Y)Q16T + RQ(Y)Q18T
Lineup
FXZQ-AVM
VRV IV Q Series
New lineup
3D Airflow Duct with Sensing
Middle Static Pressure Duct
Round Flow Cassette with Sensing
Round Flow Cassette
Compact Multi Flow Cassette
Double Flow Cassette
Single Flow Cassette
Slim Duct (Standard)
Middle-High Static Pressure Duct
High Static Pressure Duct
Slim Duct (Compact)
HP
Standard TypeVRV IV Q Series Space Saving Type
6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48
99 100
VR
V IV
Q S
erie
s
VRV IV Q Series
Outdoor Units
Specifications
Standard Type
172,000
50.4
12.1
191,000
55.9
14.0
210,000
61.5
15.7
229,000
67.0
17.6
251,000
73.5
19.5
268,000
78.5
21.8
290,000
85.0
23.7
RQQ10TYM(E)
RQQ12TYM(E)
RQQ8TYM(E)
RQQ12TYM(E)
RQQ8TYM(E)
RQQ10TYM(E)
RQQ22TNYM(E) RQQ24TNYM(E) RQQ26TNYM(E) RQQ28TNYM(E) RQQ30TNYM(E)RQQ18TNYM(E) RQQ20TNYM(E)
(3.4X1)+(4.1X1)
(3.4X1)+(5.2X1)
(1,657X930X765)+(1,657X930X765) (1,657X930X765)+(1,657X1,240X765) (1,657X1,240X765)+(1,657X1,240X765)
60
5.9+6.0 5.9+6.3 6.0+6.3
62
6.3+6.3 6.3+10.3 6.3+10.4 10.3+10.4
RQQ12TYM(E)
RQQ12TYM(E)
RQQ12TYM(E)
RQQ14TYM(E)
RQQ12TYM(E)
RQQ16TYM(E)
RQQ14TYM(E)
RQQ16TYM(E)
(5.2X1)+(5.2X1)
(4.1X1)+(5.2X1)
(5.2X1)+(2.9X1)+(3.3X1)
157+165 157+178 165+178 178+178 178+233 233+233
(5.2X1)+(3.6X1)+(3.7X1)
(2.9X1)+(3.3X1)+(3.6X1)+(3.7X1)
15.9(Brazing)
19.1(Brazing)
Hermetically Sealed Scroll Type
— — — —— — —
Ivory white (5Y7.5/1)
3-phase 4-wire system, 380-415 V/380 V, 50/60 Hz
-5 to 49
R-410A
RQQ14TYM(E)
RQQ18TYM(E)
RQQ32TNYM(E)
307,000
90.0
26.1
285+285
64
(2.9X1)+(3.3X1)+(4.4X1)+(4.0X1)
—
RQQ6TYM(E) RQQ8TYM(E) RQQ10TYM(E) RQQ12TYM(E) RQQ14TYM(E) RQQ16TYM(E)
54,600
16.0
3.63
76,400
22.4
5.18
95,500
28.0
6.88
16-100
114,000
33.5
8.82
15-100
136,000
40.0
10.7
11-100
154,000
45.0
13.0
10-100
55 56 57
6.0
59
6.3
60
10.3
61
10.4
2.4X1 3.4X1 4.1X1 5.2X1
119 157 165 178 233 233
(2.9X1)+(3.3X1) (3.6X1)+(3.7X1)
1,657X930X765 1,657X1,240X765
Hermetically Sealed Scroll Type
12.7(Brazing) 19.1(Brazing)
9.5(Brazing)
22.2(Brazing)
-5 to 49
R-410A
— — — — — —
Ivory white (5Y7.5/1)
MODEL
Power supply
Power consumption
Capacity control
Compressor
Dimensions (H×W×D)
Machine weight
Sound level
Refrigerant
Pipingconnections
Btu/h
kW
kW
%
kg
dB(A)
ºCDB
kg
kW
m³/min
mm
Charge
Type
Type
Liquid
Gas
mm
mm
Combination units
Cooling capacity
Motor output
Airflow rate
Operation range
Casing colour
3-phase 4-wire system, 380-415 V/380 V, 50/60 Hz
28.6(Brazing) 28.6(Brazing) 34.9(Brazing)
Hermetically Sealed Scroll Type
Ivory white (5Y7.5/1)
RQQ14TYM(E)
RQQ14TYM(E)
RQQ18TYM(E)
RQQ46TNYM(E)
(2.9X1)+(3.3X1)+(2.9X1)+(3.3X1)+(4.4X1)+(4.0X1)
444,000
130
36.8
(1,657X1,240X765)+(1,657X1,240X765)+(1,657X1,240X765)
10.3+10.3+10.5
233+233+233
19.1(Brazing)
-5 to 49
R-410A
461,000
135
39.1
RQQ14TYM(E)
RQQ16TYM(E)
RQQ18TYM(E)
RQQ48TNYM(E)
10.3+10.4+10.5
(2.9X1)+(3.3X1)+(3.6X1)+(3.7X1)+(4.4X1)+(4.0X1)
3-phase 4-wire system, 380-415 V/380 V, 50/60 Hz
RQQ10TYM(E)
RQQ12TYM(E)
RQQ12TYM(E)
RQQ12TYM(E)
RQQ12TYM(E)
RQQ12TYM(E)
RQQ8TYM(E)
RQQ12TYM(E)
RQQ18TYM(E)
RQQ12TYM(E)
RQQ12TYM(E)
RQQ16TYM(E)
RQQ12TYM(E)
RQQ14TYM(E)
RQQ16TYM(E)
RQQ12TYM(E)
RQQ16TYM(E)
RQQ16TYM(E)
RQQ34TNYM(E) RQQ36TNYM(E) RQQ38TNYM(E) RQQ40TNYM(E) RQQ42TNYM(E) RQQ44TNYM(E)
324,000
95.0
24.5
(1,657X930X765)+(1,657X930X765)+(1,657X930X765)
195+195+195
63
6.0+6.3+6.3
165+178+178
345,000
101
26.5
195+195+195
6.3+6.3+6.3
178+178+178
362,000
106
29.4
(1,657X930X765)+(1,657X930X765)+(1,657X1,240X765)
185+195+285
5.9+6.3+10.5
157+178+233
382,000
112
30.6
195+195+285
6.3+6.3+10.4
(5.2X1)+(5.2X1)+(3.6X1)+(3.7X1)
(3.4X1)+(5.2X1)+(4.4X1)+(4.0X1)
(4.1X1)+(5.2X1)+(5.2X1)
(5.2X1)+(5.2X1)+(5.2X1)
(5.2X1)+(3.6X1)+(3.7X1)+(3.6X1)+
(3.7X1)
(5.2X1)+(2.9X1)+(3.3X1)+(3.6X1)+
(3.7X1)
178+178+233
406,000
119
32.5
(1,657X930X765)+(1,657X1,240X765)+(1,657X1,240X765)
6.3+10.3+10.4
423,000
124
34.8
6.3+10.4+10.4
178+233+233
19.1(Brazing)
Hermetically Sealed Scroll Type
Ivory white (5Y7.5/1)
MODEL
Power supply
Power consumption
Capacity control
Compressor
Dimensions (H×W×D)
Machine weight
Sound level
Refrigerant
Pipingconnections
Btu/h
kW
kW
%
kg
dB(A)
ºCDB
kg
kW
m³/min
mm
Charge
Type
Type
Liquid
Gas
mm
mm
Combination units
Cooling capacity
Motor output
Airflow rate
Operation range
Casing colour
-5 to 49
R-410A
3-phase 4-wire system, 380-415 V/380 V, 50/60 Hz
34.9(Brazing) 41.3(Brazing) 41.3(Brazing)
RQQ18TYM(E) RQQ20TYM(E)
233
171,000
50.0
15.4
10-100
1,657X1,240X765
285
62
10.5
191,000
56.0
18.0
8-100
320
65
11.8
268
(4.6X1)+(5.5X1)(4.4X1)+(4.0X1)
15.9(Brazing)
Hermetically Sealed Scroll Type
— —
MODEL
Power supply
Power consumption
Capacity control
Compressor
Dimensions (H×W×D)
Machine weight
Sound level
Refrigerant
Pipingconnections
Btu/h
kW
kW
%
kg
dB(A)
ºCDB
kg
kW
m³/min
mm
Charge
Type
Type
Liquid
Gas
mm
mm
Combination units
Cooling capacity
Motor output
Airflow rate
Operation range
Ivory white (5Y7.5/1)Casing colour
-5 to 49
R-410A
3-phase 4-wire system, 380-415 V/380 V, 50/60 Hz
28.6(Brazing)
20-100
185 195 285
5.9
8-100 6-100 5-100
10.3+10.5
61 63
185+195 195+195 195+285
5-100 4-100 3-100
6564
195+285+285 285+285+285
66
Space Saving Type
Notes: 1. Models with (E) are the outdoor units with anti-corrosion specifications. Please refer to Engineering Data Book for details. 2. Specifications are based on the following conditions;
• Cooling: Indoor temp.: 27° CDB, 19° CWB, Outdoor temp.: 35° CDB, E quivalent piping length: 7.5 m, Level difference: 0 m.• Sound level: Anechoic chamber conversion value, measured at a point 1 m in front of the unit at a height of 1.5 m.
During actual operation, these values are normally somewhat higher as a result of ambient conditions and oil recovery mode. When there is concern for noise to the surrounding area such as residences, we recommend investigating the installation location and taking soundproofing measures.
Cooling Only
VRV IV Q Series
101 102
VR
V IV
Q S
erie
s
VRV IV Q Series
Outdoor Units
Specifications
VRV IV Q Series
233+268
362,000
106
33.4
(1,657×1,240×765)+(1,657×1,240×765)
285+320
67
10.5+11.8
382,000
112
36.0
320+320
68
11.8+11.8
268+268
399,000
117
33.0
(1,657×930×765)+(1,657×930×765)+(1,657×1,240×765)
195+195+285
65
6.3+6.3+10.5
178+178+233
420,000
123
35.6
195+195+320
67
6.3+6.3+11.8
(5.2×1)+(5.2×1)+(4.6×1)+(5.5×1)
(5.2×1)+(5.2×1)+(4.4×1)+(4.0×1)
(4.6×1)+(5.5×1)+(4.6×1)+(5.5×1)
(4.4×1)+(4.0×1)+(4.6×1)+(5.5×1)
(5.2×1)+(4.4×1)+(4.0×1)+(4.4×1)+(4.0×1)
(5.2×1)+(3.6×1)+(3.7×1)+(4.4X1)+(4.0×1)
178+178+268
440,000
129
37.2
(1,657×930×765)+(1,657×1,240×765)+(1,657×1,240×765)
6.3+10.4+10.5
457,000
134
39.6
6.3+10.5+10.5
178+233+233
19.1(Brazing)
41.3(Brazing)
Hermetically Sealed Scroll Type
-5 to 49
R-410A
— —
Ivory white (5Y7.5/1)
RQQ20TYM(E)
RQQ20TYM(E)
RQQ12TYM(E)
RQQ12TYM(E)
RQQ18TYM(E)
RQQ12TYM(E)
RQQ12TYM(E)
RQQ20TYM(E)
RQQ12TYM(E)
RQQ16TYM(E)
RQQ18TYM(E)
RQQ12TYM(E)
RQQ18TYM(E)
RQQ18TYM(E)
RQQ18TYM(E)
RQQ20TYM(E)
RQQ38TSYM(E) RQQ40TSYM(E) RQQ42TSYM(E) RQQ44TSYM(E) RQQ46TSYM(E) RQQ48TSYM(E)
3-phase 4-wire system, 380-415 V/380 V, 50/60 Hz
285,000
83.5
24.2
6-100
305,000
89.5
26.8
324,000
95.0
28.4
5-100
341,000
100
30.8
(1,657×930X765)+(1,657×1,240X765) (1,657×1,240×765)+(1,657×1,240×765)
195+285
64
6.3+10.5
195+320
66
6.3+11.8 10.4+10.5 10.5+10.5
178+233 178+268 233+233
(3.6×1)+(3.7×1)+(4.4×1)+(4.0×1)
(5.2×1)+(4.6×1)+(5.5×1)
(5.2×1)+(4.4×1)+(4.0×1)
(4.4×1)+(4.0×1)+(4.4×1)+(4.0×1)
34.9(Brazing)
41.3(Brazing)
Hermetically Sealed Scroll Type
-5 to 49
R-410A
— — — —
Ivory white (5Y7.5/1)
MODEL
Power supply
Power consumption
Capacity control
Compressor
Dimensions (H×W×D)
Machine weight
Sound level
Refrigerant
Pipingconnections
Btu/h
kW
kW
%
kg
dB(A)
ºCDB
kg
kW
m³/min
mm
Charge
Type
Type
Liquid
Gas
mm
mm
Combination units
Cooling capacity
Motor output
Airflow rate
Operation range
Casing colour
RQQ30TSYM(E) RQQ32TSYM(E) RQQ34TSYM(E) RQQ36TSYM(E)
RQQ12TYM(E)
RQQ18TYM(E)
RQQ12TYM(E)
RQQ20TYM(E)
RQQ16TYM(E)
RQQ18TYM(E)
RQQ18TYM(E)
RQQ18TYM(E)
3-phase 4-wire system, 380-415 V/380 V, 50/60 Hz
RQYQ6TY1(E) RQYQ8TY1(E) RQYQ10TY1(E) RQYQ12TY1(E) RQYQ14TY1(E) RQYQ16TY1(E)
54,60016.0
61,40018.03.633.99
76,40022.4
85,30025.05.185.69
95,50028.0
107,00031.56.887.29
16-100
114,00033.5
128,00037.58.829.06
15-100
136,00040.0
154,00045.010.711.1
11-100
154,00045.0
171,00050.013.012.8
10-100
55 56 57
6.0
59
6.3
60
10.3
61
10.4
2.4×1 3.4×1 4.1×1 5.2×1
119 157 165 178 233
(2.9×1)+(3.3×1) (3.6×1)+(3.7×1)
1,657X930X765 1,657X1,240X765
3-phase 4-wire system, 380-415 V, 50 Hz
Hermetically Sealed Scroll Type
12.7(Brazing) 19.1(Brazing)
9.5(Brazing) 22.2(Brazing) 28.6(Brazing)
-5 to 49-20 to 15.5
R-410A
Ivory white (5Y7.5/1)
MODEL
Power supply
Powerconsumption
Capacity control
Compressor
Dimensions (H×W×D)
Machine weight
Sound level
Refrigerant
Pipingconnections
Btu/h
kW
Btu/h
kW
kW
kW
%
kg
dB(A)
ºCDB
ºCWB
kg
kW
m³/min
mm
Charge
Type
Type
Liquid
Gas
mm
mm
Combination units
Cooling capacity
Heating capacity
Motor output
Airflow rate
Operationrange
Cooling
Heating
Cooling
Heating
Casing colour
— — — — — —RQYQ8TY1(E)
RQYQ12TY1(E)
RQYQ10TY1(E)
RQYQ12TY1(E)
RQYQ12TY1(E)
RQYQ12TY1(E)
RQYQ12TY1(E)
RQYQ14TY1(E)
RQYQ12TY1(E)
RQYQ16TY1(E)
RQYQ14TY1(E)
RQYQ16TY1(E)
RQYQ14TY1(E)
RQYQ18TY1(E)
RQYQ8TY1(E)
RQYQ10TY1(E)
RQYQ18TNY1(E) RQYQ20TNY1(E) RQYQ22TNY1(E) RQYQ24TNY1(E) RQYQ26TNY1(E) RQYQ28TNY1(E) RQYQ30TNY1(E) RQYQ32TNY1(E)
3-phase 4-wire system, 380-415 V, 50 Hz
Hermetically Sealed Scroll Type
-5 to 49-20 to 15.5
R-410A
— — — — — — — —
Ivory white (5Y7.5/1)
172,00050.4
193,00056.512.113.0
191,00055.9
213,00062.514.014.8
(3.4×1)+(4.1×1)
(3.4×1)+(5.2×1)
(1,657×930×765)+(1,657×930×765)
60
5.9+6.0 5.9+6.3
157+165 157+178
15.9(Brazing) 28.6(Brazing)
210,00061.5
235,00069.015.716.4
6.0+6.3
165+178
229,00067.0
256,00075.017.618.1
62
6.3+6.3
178+178
(5.2×1)+(5.2×1)
(4.1×1)+(5.2×1)
251,00073.5
281,00082.519.520.2
6.3+10.3
(5.2×1)+(2.9×1)+(3.3×1)
268,00078.5
299,00087.521.821.9
(1,657×930×765)+(1,657×1,240×765)
6.3+10.4
178+233
(5.2×1)+(3.6×1)+(3.7×1)
34.9(Brazing)
290,00085.0
324,00095.023.723.9
(1,657×1,240×765)+(1,657×1,240×765)285+285
10.3+10.4
(2.9×1)+(3.3×1)+(3.6×1)+(3.7×1)
19.1(Brazing)
233+233
307,00090.0
345,00010126.126.2
285+300
10.3+11.7
(2.9×1)+(3.3×1)+(4.4×1)+(4.0×1)
Space Saving Type
285+285
65
19.1(Brazing)
4-100
20-100
285185 195
5.9
5-1006-1008-100
185+19561
195+195 195+28563 64
• Sound level: Anechoic chamber conversion value, measured at a point 1 m in front of the unit at a height of 1.5 m.During actual operation, these values are normally somewhat higher as a result of ambient conditions and oil recovery mode. When there is concern for noise to the surrounding area such as residences, we recommend investigating the installation location and taking soundproofing measures.
195+285+285
66
Standard Type
Notes: 1. Models with (E) are the outdoor units with anti-corrosion specifications. Please refer to Engineering Data Book for details. 2. Specifications are based on the following conditions;
• Cooling: Indoor temp.: 27°CDB, 19°CWB, Outdoor temp.: 35°CDB, Equivalent piping length: 7.5 m, Level difference: 0 m.• Heating: Indoor temp.: 20°CDB, Outdoor temp.: 7°CDB, 6°CWB, Equivalent piping length: 7.5 m, Level difference: 0 m.
Heat Pump
Cooling Only
103 104
VR
V IV
Q S
erie
s
VRV IV Q Series
Outdoor Units
Specifications
VRV IV Q Series
• Sound level: Anechoic chamber conversion value, measured at a point 1 m in front of the unit at a height of 1.5 m.During actual operation, these values are normally somewhat higher as a result of ambient conditions and oil recovery mode. When there is concern for noise to the surrounding area such as residences, we recommend investigating the installation location and taking soundproofing measures.
RQYQ10TY1(E)RQYQ12TY1(E)RQYQ12TY1(E)
RQYQ12TY1(E)RQYQ12TY1(E)RQYQ12TY1(E)
RQYQ8TY1(E)RQYQ12TY1(E)RQYQ18TY1(E)
RQYQ12TY1(E)RQYQ12TY1(E)RQYQ16TY1(E)
RQYQ12TY1(E)RQYQ14TY1(E)RQYQ16TY1(E)
RQYQ12TY1(E)RQYQ16TY1(E)RQYQ16TY1(E)
RQYQ34TNY1(E) RQYQ36TNY1(E) RQYQ38TNY1(E) RQYQ40TNY1(E) RQYQ42TNY1(E) RQYQ44TNY1(E)MODEL
Power supply
Powerconsumption
Capacity control
Compressor
Dimensions (H×W×D)
Machine weight
Sound level
Refrigerant
Pipingconnections
Btu/h
kW
Btu/h
kW
kW
kW
%
kg
dB(A)
ºCDB
ºCWB
kg
kW
m³/min
mm
Charge
Type
Type
Liquid
Gas
mm
mm
Combination units
Cooling capacity
Heating capacity
Motor output
Airflow rate
Operationrange
Cooling
Heating
Cooling
Heating
Casing colour
RQYQ14TY1(E)RQYQ14TY1(E)RQYQ18TY1(E)
RQYQ46TNY1(E)RQYQ14TY1(E)RQYQ16TY1(E)RQYQ18TY1(E)
RQYQ48TNY1(E)
324,00095.0
365,00010724.525.4
(1,657×930×765)+(1,657×930×765)+(1,657×930×765)
63
165+178+178
345,000101
386,00011326.527.2
178+178+178
362,000106
406,00011929.429.9
185+195+300
5.9+6.3+11.7
157+178+233
382,000112
427,00012530.630.9
(1,657×930×765)+(1,657×930×765)+(1,657×1,240×765)
195+195+285
6.3+6.3+10.4
(5.2×1)+(5.2×1)+(3.6×1)+(3.7×1)
(3.4×1)+(5.2×1)+(4.4×1)+(4.0×1)
(4.1×1)+(5.2×1)+(5.2×1)
(5.2×1)+(5.2×1)+(5.2×1)
(2.9×1)+(3.3×1)+(2.9×1)+(3.3×1)+(4.4×1)+(4.0×1)
(5.2×1)+(3.6×1)+(3.7×1)+(3.6×1)+
(3.7×1)
(5.2×1)+(2.9×1)+(3.3×1)+(3.6×1)+
(3.7×1)
178+178+233
406,000119
454,00013332.533.0
6.3+10.3+10.4
178+233+233
423,000124
471,00013834.834.7
(1,657×930×765)+(1,657×1,240×765)+(1,657×1,240×765)
6.3+10.4+10.4
444,000130
498,00014636.837.3
(1,657×1,240×765)+(1,657×1,240×765)+(1,657×1,240×765)
10.3+10.3+11.7
233+233+233
34.9(Brazing) 19.1(Brazing)
3-phase 4-wire system, 380-415 V, 50 Hz 3-phase 4-wire system, 380-415 V, 50 Hz
Hermetically Sealed Scroll Type
-5 to 49-20 to 15.5
R-410A
Ivory white (5Y7.5/1)Hermetically Sealed Scroll Type
-5 to 49-20 to 15.5
R-410A
Ivory white (5Y7.5/1)
461,000135
515,00015139.139.0
10.3+10.4+11.7
(2.9×1)+(3.3×1)+(3.6×1)+(3.7×1)+(4.4×1)+(4.0×1)
Standard Type
— — — — — —
RQYQ20TY1(E)RQYQ20TY1(E)
RQYQ12TY1(E)RQYQ12TY1(E)RQYQ18TY1(E)
RQYQ12TY1(E)RQYQ12TY1(E)RQYQ20TY1(E)
RQYQ12TY1(E)RQYQ16TY1(E)RQYQ18TY1(E)
RQYQ12TY1(E)RQYQ18TY1(E)RQYQ18TY1(E)
RQYQ30TSY1(E) RQYQ32TSY1(E) RQYQ34TSY1(E) RQYQ36TSY1(E)RQYQ12TY1(E)RQYQ18TY1(E)
RQYQ12TY1(E)RQYQ20TY1(E)
RQYQ16TY1(E)RQYQ18TY1(E)
RQYQ18TY1(E)RQYQ18TY1(E)
RQYQ18TY1(E)RQYQ20TY1(E)
RQYQ38TSY1(E) RQYQ40TSY1(E) RQYQ42TSY1(E) RQYQ44TSY1(E) RQYQ46TSY1(E) RQYQ48TSY1(E)MODEL
Power supply
Powerconsumption
Capacity control
Compressor
Dimensions (H×W×D)
Machine weight
Sound level
Refrigerant
Pipingconnections
Btu/h
kW
Btu/h
kW
kW
kW
%
kg
dB(A)
ºCDB
ºCWB
kg
kW
m³/min
mm
Charge
Type
Type
Liquid
Gas
mm
mm
Combination units
Cooling capacity
Heating capacity
Motor output
Airflow rate
Operationrange
Cooling
Heating
Cooling
Heating
Casing colour
285,00083.5
319,00093.524.224.2
6-100
305,00089.5
345,00010126.826.6
324,00095.0
362,00010628.427.9
5-100
341,000100
382,00011230.830.2
(1,657×930×765)+(1,657×1,240×765) (1,657×1,240×765)+(1,657×1,240×765)
195+32066
6.3+11.8
285+300
10.4+11.7
300+300
11.7+11.7
178+233 178+268 233+233 233+268
362,000106
406,00011933.432.6
(1,657×1,240×765)+(1,657×1,240×765)
300+32067
11.7+11.8
382,000
112430,000
12636.035.0
320+32068
11.8+11.8
268+268
399,000117
447,00013133.033.2
(1,657×930×765)+(1,657×930×765)+(1,657×1,240×765)
195+195+30065
6.3+6.3+11.7
178+178+233
420,000123
471,00013835.635.6
195+195+32067
6.3+6.3+11.8
(5.2×1)+(5.2×1)+(4.6×1)+(5.5×1)
(5.2×1)+(5.2×1)+(4.4×1)+(4.0×1)
(4.6×1)+(5.5×1)+(4.6×1)+(5.5×1)
(4.4×1)+(4.0×1)+(4.6×1)+(5.5×1)
(5.2×1)+(4.4×1)+(4.0×1)+(4.4×1)+(4.0×1)
(5.2×1)+(3.6×1)+(3.7×1)+(4.4×1)+(4.0×1)
178+178+268
440,000
129491,000
14437.237.0
(1,657×930×765)+(1,657×1,240×765)+(1,657×1,240×765)
195+285+300
6.3+10.4+11.7
178+233+233
457,000134
512,00015039.639.3
195+300+300
6.3+11.7+11.7
(3.6×1)+(3.7×1)+(4.4×1)+(4.0×1)
(5.2×1)+(4.6×1)+(5.5×1)
(5.2×1)+(4.4×1)+(4.0×1)
(4.4×1)+(4.0×1)+(4.4×1)+(4.0×1)
19.1(Brazing) 41.3(Brazing)
19.1(Brazing) 34.9(Brazing) 41.3(Brazing)
3-phase 4-wire system, 380-415 V, 50 Hz
Hermetically Sealed Scroll Type
-5 to 49-20 to 15.5
R-410A
3-phase 4-wire system, 380-415 V, 50 Hz
Hermetically Sealed Scroll Type
-5 to 49-20 to 15.5
R-410A
Ivory white (5Y7.5/1) Ivory white (5Y7.5/1)
195+30064
6.3+11.7
Space Saving Type
MODEL
Power supply
Powerconsumption
Capacity control
Compressor
Dimensions (H×W×D)
Machine weight
Sound level
Refrigerant
Pipingconnections
Btu/h
kW
Btu/h
kW
kW
kW
%
kg
dB(A)
ºCDB
ºCWB
kg
kW
m³/min
mm
Charge
Type
Type
LiquidGas
mmmm
Combination units
Cooling capacity
Heating capacity
Motor output
Airflow rate
Operationrange
Cooling
Heating
Cooling
Heating
Casing colour
RQYQ18TY1(E) RQYQ20TY1(E)
––
233
171,00050.0
191,00056.015.415.1
10-100
1,657×1,240×765
30062
11.7
191,00056.0
215,00063.018.017.5
8-100
32065
11.8
268
(4.6×1)+(5.5×1)(4.4×1)+(4.0×1)
15.9(Brazing) 28.6(Brazing)
3-phase 4-wire system, 380-415 V, 50 Hz
-5 to 49-20 to 15.5
R-410A
Ivory white (5Y7.5/1)
41.3(Brazing)
3-1004-1005-100
64195+195+195 285+285+300
66195+285+285
65
6.0+6.3+6.3
65
4-100
66
Hermetically Sealed Scroll Type
Notes: 1. Models with (E) are the outdoor units with anti-corrosion specifications. Please refer to Engineering Data Book for details. 2. Specifications are based on the following conditions;
• Cooling: Indoor temp.: 27°CDB, 19°CWB, Outdoor temp.: 35°CDB, Equivalent piping length: 7.5 m, Level difference: 0 m.• Heating: Indoor temp.: 20°CDB, Outdoor temp.: 7°CDB, 6°CWB, Equivalent piping length: 7.5 m, Level difference: 0 m.
Heat Pump
105 106
VR
V IV
W S
erie
s
VRV IV W Series
Cooling tower (closed type)
Outside unit
Indoor unitRefrigerant piping
Water piping
Boiler (for heating)
High-rise buildings Condominiums and detached houses
Underground shopping malls and subway
• Water cooled system does not require to exchange heat with outdoor air
Design flexibility
Design flexibilityHigh installation
flexibility
Compact outside units can be easily installed in the machine rooms on each floor. It is adaptable to high-rise buildings.
We offer an extensive lineup of small capacity outside units as well as connectable residential indoor units.
As heat exchanging with outdoor air is not required, individual air conditioning can be easily provided.
• Individual air conditioning is achieved via on-demand operation in each room.
• The length of the refrigerant piping can be minimized by installing outside units in proximity to indoor units.
• As refrigerant piping is connected to indoor units, it reduces the risks of indoor water leakage.
• Outside units can be installed indoors.• The air conditioning operation is stable even
when the outdoor air temperature is high
Water Cooled System Suitable for Tall Multi-Storied Buildings
Single outdoor units
RWEYQ6-12TYM
Double outdoor units
RWEYQ14-24TYM
Triple outdoor units
RWEYQ26-36TYM
6HP–36HP
Heat Pump
(16 kW) (101 kW)
No balcony required
Drain pipe
Water pipeWater pipe
(300-400 mm)
* Only for the purpose of illustration.
Min. 300 mm
(100-300 mm)
Refrigerant liquid pipeRefrigerant gas pipe
Water in�owWater out�ow
Celling heightMin. 3,200 mm
107 108
VR
V IV
W S
erie
s
VRV IV W Series
Based on cooling condition
OfficeMeeting room
Large meeting room: OFF
General manager office: 27°C, low air volume
Office: 26°C, high air volume
Phase 1
Phase 2
Phase 3
*System diagram
Water cooled VRV IV W series
Renovation in phases is possible.
Easy Installation
It is possible to place the outside unit inside the building, it makes easier to adapt to different type of buildings and open to various kinds of creative building exteriors.
Indoor installation solves the puzzle of proper placement of outdoor units
The water cooled VRV IV W series can retain the cooling tower and boiler of the old system during renovation, effectively keeping costs down.
Part of the old system can be retained
• The outside units are conveniently compact so transport by elevator is possible. It also effectively simplifies installation. This also saves a great deal of time and labor.
• The modular design enables a free and flexible configuration of the outside units. Also can save space for other purposes.
The compact outside units facilitate the renovation process
Because equipment can be replaced in phases, installation adapts to the renovation plans of the customers and ensures that work performed on some floors and zones will not affect other tenants.
Floor by floor renovation without disturbing other tenants
During actual operation, the load of an air conditioning system changes according to variations in weather conditions outside and indoor unit operation rates. Daikin’s advanced DC inverter technology and advanced refrigerant control technology boasts a higher efficiency under partial load than in the rated operating conditions.
Higher efficiency with partial load
Each indoor unit can be independently controlled and adjusted according to each tenant’s individual needs for temperature and air volume.
Independent control provides greater comfort and convenience.
Each indoor unit can be independently controlled and adjusted according to each tenant’s individual needs for temperature and air volume.
• Inconvenient transportation procedures are eliminated.• Operation for each indoor unit can be precisely and individually set.
Flexibly satisfies conditions for working overtime and times of insufficient load
Water Cooled VRV IV as a Retrofit Solution
Problems with existing water systems can be solved with minimal construction work.
Individual air conditioning comfort can be realized when and where it is actually required.
A flexible system convenient for expansion/renovation
Actual conditions of the floor
Air conditioning of the meetingroom is normally switched off
Example of air conditioning control for different rooms of the same floor
Cost Saving
Space Saving
Flexible Renovation
Saving morespace for
other purposes
Outside units take up a disproportionately large amount of
space for installation.Can save space
Retained coolingtower
Retained boiler
Before renovation After renovation*System diagram
Cooling tower
Garage
Cooling tower
Cold sourceback-flow
Cold sourcesupply
Heat source supply
Heat source back-flow
Cooling tower
Pump
Pump
BoilerPlate heat exchanger
During normal work hours, the building's central air conditioner is usedDuring normal work hours, the building's central air conditioner is used
At weekends, the water cooled VRV IV W series operatesAt weekends, the water cooled VRV IV W series operates
The water cooled VRV IV W series is utilised to meet overtime work needsThe water cooled VRV IV W series is utilised to meet overtime work needs
The water cooled VRV IV W series is utilised to meet weekend work needsThe water cooled VRV IV W series is utilised to meet weekend work needs
When a large number of people are present, the water cooled VRV IV W series can work to supplement insufficient capacity of the building's central air conditioner
When a large number of people are present, the water cooled VRV IV W series can work to supplement insufficient capacity of the building's central air conditioner
Both the building's central air conditionerand the water cooled VRV IV W series operate
Both the building's central air conditionerand the water cooled VRV IV W series operate
During overtime hours, the water cooled
VRV IV W series operates
During overtime hours, the water cooled
VRV IV W series operates
Meeting Room
WorkdaysOffice
WeekendsGeneral manager's office
8:00 9:00 10:00 11:00 12:00 13:00 14:00 15:00 16:00 17:00 19:0018:00 20:00 21:00
109 110
VR
V IV
W S
erie
s
VRV IV W Series
Centralised interlocking function
Centralised interlocking input operate by using an external control adaptor (DTA104A62).
Easy Installation & Energy Saving
Compact and lightweight
Enhanced usability
Enhanced lineup
VRT control for optimal annual efficiency
VRT automatically adjusts refrigerant temperature to individual building and climate requirement, thus further improving annual energy efficiency and maintaining comfort.
Energy saving
*Cooling : Indoor temp.: 27ºCDB, 19ºCWB/inlet water temp.: 30ºC, Equivalent piping length: 7.5 m, Level difference: 0 m.
Cooling Operation EER
6.20
8 HP 10 HP 12 HP6 HP
5.805.16
4.57
6.00
5.00
4.00
3.00
2.00
1.00
0
6 HP, 8 HP, 10 HP, 12 HP
RWEYQ6TYMRWEYQ8TYM
RWEYQ14TYMRWEYQ16TYMRWEYQ18TYM
RWEYQ26TYMRWEYQ28TYMRWEYQ30TYM
RWEYQ20TYMRWEYQ22TYMRWEYQ24TYM
RWEYQ32TYMRWEYQ34TYMRWEYQ36TYM
RWEYQ10TYMRWEYQ12TYM
DTA104A62
CompactDesign
VRV III W series
VRV IV W Series
Higher Energy Efficiency Ratio (EER)
16%Increase
18%Increase
6, 8, 10, 12 HP 14, 16, 18, 20, 22, 24 HP 26, 28, 30, 32, 34, 36 HP
1,000 mm
780 mm
550 mm
Footprint : 0.43 m2
Product Weight :(*For 6 HP, 8 HP)146 kg
Wider capacity range from 6 to 36 HP
Interlocking
Control wiring(external-to-external transmission wiring)
Using one external control adaptor circuit board makes centralised interlocking input to multiple units within the same water system possible.
111 112
VR
V IV
W S
erie
s
VRV IV W Series
Installation for VRV indoor units only
Flexible System Design
Long piping length
Installation for residential indoor units only
*1 No special requirements up to 40 m. The maximum actual piping length can be 90 m, depending on conditions. The VRV IV W series is easy to extend to 90 m bylessening the conditions from conventional VRV III W models. Be sure to refer to the Engineering Data Book for details of these conditions and requirements.
p
q
k
fa
b
Firstindoor branch
Multiple use
Max.allowablelevel difference
Max.allowablepiping length
Between the outside units and the indoor units
Between the indoor units
Between the outside units (multiple use)
Between the first indoor branch and the farthest indoor unit
Between the first outside branch and the last outside unit
Total piping length
Refrigerant piping length
15 m
50 m
2 m
—
—
—
——
q
s
rIf the outside unit is above.If the outside unit is below. 40 m —r
a+b+c+d+e+f+g+h+i
a+f+g+h+i
f+g+h+i
k+p
120 m 140 m
300 m90 m*1
10 m 13 m
Actualpiping length
Equivalentpiping length Example
*1. When the piping length exceeds 20 m, the size of the main pipes (the gas side and the liquid side) must be increased. Please refer to Engineering Data Book for details.
Max.allowablelevel difference
Max.allowablepiping length
Max. and min.allowablepiping length
If indoor unit capacity index < 60
If indoor unit capacity index is 60
If indoor unit capacity index is 71
If the outside unit is above.
If the outside unit is below.
a+b+k
a+b+e+h+j+k
b+k
h,i,j,k
h,i,j,k
h,i,j,k
n
n
l
o
m
p
100 m
200 m
50 m*1
2 m - 15 m
2 m - 12 m
2 m - 8 m
50 m
40 m
15 m
40 m
15 m
5 m
120 m
—
—
—
—
—
—
—
—
—
—
—
Refrigerant piping length
Total piping length
Between the first indoor branch and the farthest indoor unit
Between the outside unit
and the indoor unit
Between the indoor units
Between the outside unit and the BP unit
Between BP units
Between the BP unit and the indoor unit
Actualpiping length
EquivalentExample piping lengthExample
Max. 50 m
Max. 40 m
Max. 15 m
Max. 15 m
ao
l
n
be
Max.5 mP
mh i
k
BP unit
BP unit
RA RA
RA
RA
Single use only
*Colours in the diagram following are merely for identifying pipes referenced with symbols such as a .
RA: Residential indoor unit
Between BP unit and
indoor unit
First outdoor branch
*The rest of indoor units are the same as for single use.
First indoor branch First indoor branch
*Colours in the diagram above are merely for identifying pipes referenced with symbols such as a .
Max. 120 m
Actual piping length
Max. 140 m
Equivalent piping length
Max. 300 m
Total piping length
Max. 100 m
Actual piping length
Max. 120 m
Equivalent piping length
Max. 200 m
Total piping length
a
i
s
r
hgf
edcb
Single use
113 114
VR
V IV
W S
erie
s
VRV IV W Series
The reluctance DC motor uses 2 different types of torque, neodymium magnet and reluctance torque. It generates more power with a smaller electric power and saves energy.
Advanced Technologies
High efficiency compressor to achieve a high performance
Surplus oil is stored in the receiver and automatically controls the amount of refrigeration oil in the refrigerant cycle.This prevents a reduction in performance for heat exchanger.
Minimize performance degradation from refrigeration oil in all stages of operation
Auto-restart technology
Refrigerant pressure detection technology
• Utilizes temperature sensors to detect the system’s operating status.
• Employs high and low pressure sensors to carry out quick, comprehensive and accurate detection of the refrigerant status.
Outside unit combinations
Lineup
Outside Unit LineupVRV IV W Series
HP Model Combination
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
16.0
22.4
28.0
33.5
38.4
44.8
50.4
56.0
61.5
67.0
72.8
78.4
84.0
89.5
95.0
101
RWEYQ6T
RWEYQ8T
RWEYQ10T
RWEYQ12T
RWEYQ14T*1
RWEYQ16T*1
RWEYQ18T*1
RWEYQ20T*1
RWEYQ22T*1
RWEYQ24T*1
RWEYQ26T*1
RWEYQ28T*1
RWEYQ30T*1
RWEYQ32T*1
RWEYQ34T*1
RWEYQ36T*1
RWEYQ6T × 1
RWEYQ8T × 1
RWEYQ10T × 1
RWEYQ12T × 1
RWEYQ6T + RWEYQ8T
RWEYQ8T × 2
RWEYQ8T + RWEYQ10T
RWEYQ10T × 2
RWEYQ10T + RWEYQ12T
RWEYQ12T × 2
RWEYQ8T × 2 + RWEYQ10T
RWEYQ8T + RWEYQ10T × 2
RWEYQ10T × 3
RWEYQ10T × 2 + RWEYQ12T
RWEYQ10T + RWEYQ12T × 2
RWEYQ12T × 3
75 to 195
100 to 260
125 to 325
150 to 390
175 to 455
200 to 520
225 to 585
250 to 650
275 to 715
300 to 780
325 to 845
350 to 910
375 to 975
400 to 1,040
425 to 1,105
450 to 1,170
9
13
16
19
22
26
29
32
35
39
42
45
48
52
55
58
kW
150
200
250
300
350
400
450
500
550
600
650
700
750
800
850
900
Capacity index
Total capacity index of connectable indoor units*2
Maximum number ofconnectable indoor units
RWEYQ6TRWEYQ8TRWEYQ10TRWEYQ12T
16.022.4
28.033.5
68
1012
150200
250300
120160
200240
80%*2
Combination (%)*2
Total capacity index of connectable indoor units*2
913
1619
Model name*1 kW HPCapacity
indexMaximum number of
connectable indoor units
150200
250300
100%
195130%
260
325390
For connection of only VRV indoor units
For connection of only residential indoor units
*1. An outside unit multi connection piping kit (option) is necessary for multiple connections of 14 HP systems and above.*2. Total capacity index of connectable indoor units must be 50%–130% of the capacity index of the outside units.
*1. Only single outside unit (RWEYQ6-12T) can be connected.*2. Total capacity index of connectable indoor units must be 80%–130% of the capacity index of the outside unit.
6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36
16.0 22.4 28.0 33.5 38.4 44.8 50.4 56.0 61.5 67.0 72.8 78.4 84.0 89.5 95.0 101
HP
kW
CapacityRange
VRV IV W SERIES
Reluctance DC motor
New oil receiver
Oil separator
Compressor
Power interruption during normal operation
Keep a record of the operating mode adopted
Restore itself back into the recorded operating status
power supplyrecovers
SMT* packaging technology
• Improves the anti-clutter performance.• Protects your computer boards from the
adverse effects of sandy climates and humid weather.
*SMT: Surface mounted technology
SMT packaging material
Computer control board
Computer control board surface adopting SMT packaging technology
Function of information display by luminous digital tube
VRV IV W series utilises a bright 7-segment digital display to convey operational status and facilitate simple installation and after-sales service.
7-segment digital display
Displays system operation information directly
Automatic sequencing operation
Stage 3
Priority
Automaticsequencing
132
Stage 2
Priority
Automaticsequencing
213
Stage 1
Priority 321
115 116
VR
V IV
W S
erie
s
VRV IV W SeriesFl
oor
Stan
ding
Ceilin
g Su
spen
ded
Cat
egor
yC
eilin
g M
ount
ed C
asse
tte
Cei
ling
Con
ceal
ed D
uct
Indoor Unit Lineup
20
20
2.0
25 35
25 35
2.5 3.5
50 60 71
50 60 71
5.0 6.0 7.1Rated Capacity (kW)Type Model Name
Capacity Index
Slim CeilingConcealed Duct
Wall Mounted
(700 mm width type)
(900/1,100 mm width type)
Note: BP units are necessary for residential indoor units. Only single outside unit (RWEYQ6-12T) can be connected.
CDXS-EAVMA
FDXS-CVMA
FTXS-FVMA
FTXS-DVMA
FTXS-EVMA
FTXJ-NVMVW
FTXJ-NVMVS
Residential indoor units with connection to BP units
*Refer to page 114 for the maximum number of connectable indoor units.
BP unit BP unit
VRV indoor units only
Residential indoor units only
58Max.
indoor units
19Max.
indoor units
VRV indoor units
FXDSQ-AVM
FXSQ-PAVE
Capacity Range
Capacity Index 20
0.8 HP
20
1.6 HP
40
2.5 HP
63
3.2 HP
80
3 HP
71
4 HP
100
5 HP
125
6 HP
140
8 HP
200
10 HP
250
2 HP1.25 HP
32
62.531.25
1 HP
25
Type Model Name
FXFSQ-AVM
Ceiling Suspended
Wall Mounted
Floor Standing
Concealed Floor Standing
4-Way Flow Ceiling Suspended
Outdoor-Air Processing Unit
FXVQ-NY1
FXVQ-NY16(high static pressure type)
Floor Standing Duct
FXDQ-SPV1
400
16 HP
500
20 HP
FXMQ-MFV1
Heat Reclaim Ventilator
Air Handling Unit
Heat Reclaim Ventilator with DX-Coil and Humidifier
VKM-GA(M)V1
VAM-GJVE
AHUR
Airflow rate 500-1000 m3/h
Airflow rate 150-2000 m3/h
FXEQ-AV36
FXFQ-AVM
FXZQ-AVM
FXCQ-AVM
FXMQ-PAVE
FXMQ-PVM
FXHQ-AVM
FXUQ-AVEB
FXHQ-MAVE
FXAQ-AVM
FXLQ-MAVE
FXNQ-MAVE
FXDQ-PDVE(with drain pump)
FXDQ-PDVET(without drain pump)
FXDQ-NDVE(with drain pump)
FXDQ-NDVET(without drain pump)
6–120 HP
50
40 8071 100 125 140 200 25025 400 50050
(700 mm width type)
( )900/1,100 mmwidth type
New lineup
3D Airflow Duct with Sensing
Middle Static Pressure Duct
Round Flow Cassette with Sensing
Round Flow Cassette
Compact Multi Flow Cassette
Double Flow Cassette
Single Flow Cassette
Slim Duct (Standard)
Middle-High Static Pressure Duct
High Static Pressure Duct
Slim Duct (Compact)
Enhanced range of choices
117 118
VR
V IV
W S
erie
s
VRV IV W Series
Outside Units
Specifications
RWEYQ6TYM––
3-phase 4-wire system, 380-415 V/380 V, 50/60 Hz
lvory white (5Y7.5/1)1,000 × 780 × 550
Hermetically sealed scroll type
PT1 1/4B intenal threadPT1 1/4B intenal threadPS1/2B intenal thread
10 to 45
R-410A
3-phase 4-wire system, 380-415 V/380 V, 50/60 Hz
lvory white (5Y7.5/1)(1,000 × 780 × 550) × 2
Hermetically sealed scroll type
15.9 (Flare) 28.6 (Brazing)
22.2*2, 28.6*3 (Brazing) (PT1 1/4B) × 2 intenal thread(PT1 1/4B) × 2 intenal thread(PS1/2B) × 2 intenal thread
5410 to 45
R-410A
54,60016.0
61,40018.02.582.69
1.9
49146 (148)
23-100
3.5
147 (149)
19-100
4.2
19.1 (Brazing) 15.9*2, 19.1*3 (Brazing)
22.2 (Brazing) 19.1*2, 22.2*3 (Brazing)
RWEYQ8TYM––
76,40022.4
85,30025.03.863.98
2.8 9.5 (Flare)
50
RWEYQ10TYM––
95,50028.0
107,00031.55.435.60
3.7
51
RWEYQ12TYM––
114,00033.5
128,00037.57.337.87
4.7 12.7 (Flare)
53
RWEYQ14TYMRWEYQ6TYMRWEYQ8TYM
131,00038.4
147,00043.06.446.67
1.9 + 2.8
146 × 2 (148 × 2)53
23-100
3.5 + 3.5
12.7 (Flare) 19.1 (Flare)
153,00044.8
171,00050.07.727.96
2.8 × 2
172,00050.4
193,00056.59.299.58
2.8 + 3.7
146 + 147 (148 + 149)
20-100
3.5 + 4.2
191,00056.0
215,00063.010.911.2
3.7 × 2
210,00061.5
235,00069.012.813.5
3.7 + 4.7
147 × 2 (149 × 2)55
19-100
4.2 + 4.2
229,00067.0
256,00075.014.715.7
4.7 × 2
56
RWEYQ16TYMRWEYQ8TYMRWEYQ8TYM
RWEYQ18TYMRWEYQ8TYMRWEYQ10TYM
RWEYQ20TYMRWEYQ10TYMRWEYQ10TYM
RWEYQ22TYMRWEYQ10TYMRWEYQ12TYM
RWEYQ24TYMRWEYQ12TYMRWEYQ12TYM
Btu/h
kW
Btu/h
kW
kW
kW
mm
kW
mm
kg
dB(A)
°C
%
kg
Type
Motor output
Liquid
Suction gas *1
High and low pressure gas
Water inlet
Water outlet
Drain outlet
Type
Charge
Cooling
Heating
MODEL
Power supply
Cooling capacity
Heating capacity
Casing colour
Dimensions (H × W × D)
Machine weight (Operating weight)
Sound level
Operation range (Inlet water temp.)
Capacity control
Refrigerant
RWEYQ26TYMRWEYQ8TYMRWEYQ8TYMRWEYQ10TYM
RWEYQ28TYMRWEYQ8TYM
RWEYQ10TYMRWEYQ10TYM
RWEYQ30TYMRWEYQ10TYMRWEYQ10TYMRWEYQ10TYM
287,00084.0
322,00094.516.316.8
3.7 × 3
147 × 3 (149 × 3)
19-100
4.2 + 4.2 + 4.2
Btu/h
kW
Btu/h
kW
kW
kW
mm
kW
mm
kg
dB(A)
°C
%
kg
Type
Motor output
Liquid
Suction gas *1
High and low pressure gas
Water inlet
Water outlet
Drain outlet
Type
Charge
Cooling
Heating
MODEL
Combination units
Power supply
Cooling capacity
Heating capacity
Casing colour
Dimensions (H × W × D)
Machine weight (Operating weight)
Sound level
Operation range (Inlet water temp.)
Capacity control
Refrigerant
3-phase 4-wire system, 380-415 V/380 V, 50/60 Hz268,000
78.4300,000
88.014.715.2
lvory white (5Y7.5/1)(1,000 × 780 × 550) × 3
Hermetically sealed scroll type2.8 + 3.7 × 2 19.1 (Flare)
34.9 (Brazing) 28.6*2, 34.9*3 (Brazing) (PT1 1/4B) × 3 intenal thread(PT1 1/4B) × 3 intenal thread(PS1/2B) × 3 intenal thread
146 + 147 × 2 (148 + 149 × 2)
10 to 4520-100R-410A
3.5 + 4.2 + 4.2
56
RWEYQ32TYMRWEYQ10TYMRWEYQ10TYMRWEYQ12TYM
305,00089.5
345,00010118.219.1
3.7 × 2 + 4.7
57
RWEYQ34TYMRWEYQ10TYMRWEYQ12TYMRWEYQ12TYM
RWEYQ36TYMRWEYQ12TYMRWEYQ12TYMRWEYQ12TYM
345,000101
386,000 113 22.0 23.6
4.7 × 3
58
3-phase 4-wire system, 380-415 V/380 V, 50/60 Hz324,000
95.0365,000
10720.121.3
lvory white (5Y7.5/1)(1,000 × 780 × 550) × 3
Hermetically sealed scroll type3.7 + 4.7 × 2 19.1 (Flare)
34.9 (Brazing) 28.6*2, 34.9*3 (Brazing)
(PT1 1/4B) × 3 intenal thread(PT1 1/4B) × 3 intenal thread(PS1/2B) × 3 intenal thread
147 × 3 (149 × 3)
10 to 4519-100R-410A
4.2 + 4.2 + 4.2
248,00072.8
278,00081.513.213.6
2.8 × 2 + 3.7
146 × 2 + 147 (148 × 2 + 149)55
21-100
3.5 + 3.5 + 4.2
Notes:1. Specifications are based on the following
conditions:• Cooling: Indoor temp.: 27ºCDB, 19ºCWB / inlet
water temp.:30ºC, Equivalent piping length: 7.5 m, Level difference: 0 m.
• Heating: Indoor temp.: 20ºCDB / inlet water temp.: 20ºC, Equivalent piping length: 7.5 m, Level difference: 0 m.
• Sound level: Anechoic chamber conversion value, measured at a point 1 m in front of the unit at a height of 1.5 m.During actual operation, these values are normally somewhat higher as a result of ambient conditions and oil recovery mode.When there is concern for noise to the surrounding area such as residences, we recommend investigating the installation location and taking soundproofing measures.
2. This unit cannot be installed in the outdoors. Install indoors (Machine room, etc).
3. Hold ambient temperature at 0 – 40ºC and humidity at 80%RH or less. Heat rejection from the casing: 0.51 kW / 6 - 8 HP / hour, 0.58 kW / 10 - 12 HP / hour.
4. Connectable to closed type cooling tower only.*1: In the case of heat pump system, suction gas
pipe is not used.*2: In the case of heat recovery system.*3: In the case of heat pump system.
• Be sure to refer to the Engineering Data Book for facility design.
Compressor
Refrigerant piping connections
Water piping connections
Compressor
Refrigerant piping connections
Water piping connections
Combination units
Power consumption
Power consumption
VRV IV W Series
Heat Pump
119 120
VR
V IV
Hea
t R
eco
very
Ho
t W
ater
Sys
tem
VRV IV Heat Recovery Hot Water System
Flexible combination of VRV IV indoor units achieves comfort and aesthetic
Air conditioning combined with hot water supply – Compact system
Extremely energy-efficient energy source
Outdoor unit
Air conditioning indoor unit
Hot water storage tank
Serpentine heat exchanger unit
The system can be used in combination with other water heaters depending on the required amount and temperature of hot water.
Energy to supply hot water – Cost-effective
Hot water temperature – Up to 65 °C
Can be used in combination with other water heaters depending on the required amount and temperature of hot water.
AIR CONDITIONING
HOT WATER SUPPLY
Comfortable Air Conditioning and Energy-efficient Hot Water Heating
6HP–60HP
Cooling Only
(16 kW) (168 kW)
Double outdoor units
RWHQ12-16THYM
Triple outdoor units
RWHQ18-50THYM
High-COP Type
Single outdoor units
RWHQ6-16TYM
Double outdoor units
RWHQ18-32TNYM
Triple outdoor units
RWHQ34-60TNYM
Standard Type
Single outdoor units
RWHQ18-20TYM
Double outdoor units
RWHQ22-40TSYM
Triple outdoor units
RWHQ42-50TSYM
Space Saving Type
121 122
VR
V IV
Hea
t R
eco
very
Ho
t W
ater
Sys
tem
VRV IV Heat Recovery Hot Water System
BRCS82
The serpentine heat exchanger unit recovers heat
In a conventional system, waste heat from air conditioning is released into the ambience.
This system recovers waste heat from airconditioning to heat water.
Innovative and Reliable System
Waste heat from air conditioning (which usually released into the ambience) is recovered to heat water
Example on usage of VRV IV Heat Recovery Hot Water System for residence
The energy-ef f icient system recovers waste heat as energy to heat water
Hot air discharge
Ambient air
CirculatingPump
Compact, lightweight design
Refrigerant pipe(Outlet)Water pipe
(Inlet)
Water in
Refrigerant out
Refrigerant in
Water out
Refrigerant pipe(Inlet)
Water pipe(Outlet)
The waste heat from air conditioning is transferred to heat water. This mechanism reduces the amount of heat processed by the outdoor unit, resulting in better operation efficiency. The EER for VRV IV Heat Recovery Hot Water has increased from 4.41 to 4.50, compared with the conventional VRV IV.
Increased energy efficiency of the outdoor unit
The temperature of exhaust heat from the outdoor unit is lower, minimising in ambient temperature increase. In the event of a short circuit, capacity reduction is minimised.
Reducing short circuits
Air conditioner load conditions / Operation time: 16 hours/dayWater-heating load Tank capacity: 200 L Boiling temperature: 25˚C to 60˚C (tap water) Amount of hot water per person per time (standard): 50 L/shower (39˚C) (water dispensed: 10 L/min.; shower time: 5 min./shower) Amount of water required in tank to dispense 39˚C hot water
Comparison between VRV IV Heat Recovery Hot Water System and electric heater
No electric heater consumption(Water heating by the use of waste heat)
Electric heater VRV IV Heat Recovery Hot Water System + water pump
94%reduction
1000
An
nu
al p
ow
er c
on
sum
pti
on
[kW
h]
2000
3000
4000
0
Family composition
3 adults50 L 50 L
X
= 12 showers (600 L (39˚C))3 children
2 showers / person / day
5 6 7 8 9 10 11 12 13 14 15 16 17
Time
VRV Heat load
70%
50%
30%
OFF
150L
60˚C
25˚C
0L
Hot water supply pattern
Water Temp.
18 19 20 21 22 23 24 1 2 3
40˚C
ON ONOFF
4
Because waste heat is used to heat water, annual electricity consumption can be reduced approximately 94% compared with consumption for separate operation of air conditioning and an electric water heater.
In a sample family model of 3 adults and 3 children, the waste heat generated by air conditioning is sufficient to supply hot water for everybody’s showers.
VRV IV Heat Recovery Hot Water controllerConvertible Remote Controller Main Remote Control & Sub Remote Controller are both convertible and interchangeable.
Anti-BacteriaBy default, this would be activated every Monday morning at 2am, heating storage water up to 60°C for 10 minutes.
Vacation ModeThis disables all other functions, except for anti-bacterial mode.
Auto RestartWhen power supply is restored after a failure, the system would revert to the last operational function.
Safety-Error CodeIf thermistors or communication line are faulty, as a safety precaution, operation of the electric heater is disabled.
234 kWh
Ambient air
Lower hot air discharge
The proprietary Serpentine Heat Exchanger achieves excellent heat exchange efficiency.
The high-temperature, high-pressure refrigerant pipe is coiled around the water pipe.
Refrigerant leakage does not contaminate water.
HotWater
StorageTank
Generally, all air conditioners are not in operation during the day because parents are working.
Generally, all air conditioners are not in operation during the day because parents are working.
3,986 kWh
When cooling, if the temperature drops in the storage water heater, the unit starts water heating operations by using the waste heat.When cooling, if the temperature drops in the storage water heater, the unit starts water heating operations by using the waste heat.
123 124
VR
V IV
Hea
t R
eco
very
Ho
t W
ater
Sys
tem
VRV IV Heat Recovery Hot Water SystemC
eilin
g M
ount
ed C
asse
tte
Cat
egor
yC
eilin
g C
once
aled
Duc
tCe
iling
Susp
ende
dFl
oor
Stan
ding
Note: BP units (BPMKS967A2/3) are necessary for residential indoor units.
A mixed of stylish and quiet VRV type indoor units and residential type indoor units can be combined into one system.
Indoor Unit Lineup
Enhanced range of choices
FXFSQ-AVMRound Flow Cassette with Sensing
Air Handling Unit AHUR
Heat Reclaim Ventilator
Heat Reclaim Ventilator with DX-Coil and Humidifier
VKM-GA(M)V1
VAM-GJVE
Airflow rate 500-1000 m3/h
Airflow rate 150-2000 m3/h
Clean Room Air ConditionerFXBQ-PVE
FXBPQ-PVE
FXVQ-NY1
FXVQ-NY16(high static pressure type)
Floor Standing Duct
Wall Mounted
Floor Standing
Concealed Floor Standing
FXAQ-AVM
FXLQ-MAVE
FXNQ-MAVE
Ceiling SuspendedFXHQ-AVM
FXHQ-MAVE
Outdoor-Air Processing Unit FXMQ-MFV1
FXMQ-PAVE
FXMQ-PVM
FXSQ-PAVEMiddle Static Pressure Duct
Middle-High Static Pressure Duct
High Static Pressure Duct
FXDQ-SPV1Slim Duct (Compact)
Slim Duct (Standard)
FXDQ-PDVE(with drain pump)
FXDQ-PDVET(without drain pump)
FXDQ-NDVE(with drain pump)
FXDQ-NDVET(without drain pump)
FXDSQ-AVM3D Airflow Duct with Sensing
Round Flow Cassette
Compact Multi Flow Cassette
Double Flow Cassette
Single Flow Cassette
4-Way Flow Ceiling Suspended
FXEQ-AV36
FXFQ-AVM
FXZQ-AVM
FXCQ-AVM
FXUQ-AVEB
VRV indoor units
Capacity Range
Capacity Index 20
0.8 HP
20
1.6 HP
40
2.5 HP
63
3.2 HP
80
3 HP
71
4 HP
100
5 HP
125
6 HP
140
8 HP
200
10 HP
250
2 HP1.25 HP
32
62.531.25
1 HP
25
Type Model Name
400
16 HP
500
20 HP
50
40 8071 100 125 140 200 25025 400 50050
FDKS-EAVMB
Slim CeilingConcealed Duct
FTKS-FVM
Wall Mounted
FTKS-BVMA
FDKS-C(A)VMB
FTKJ-NVMVW
FTKS-DVM
FTKJ-NVMVS
Residential indoor units with connection to BP units
Rated Capacity (kW)
Capacity Index
5.0
50
6.0
60
3.52.5
25
Type Model Name
71
7.1
35
50 6025 7135
6–120 HP
(700 mm width type)
(900/1,100 mm width type)
New lineup
(700 mm width type)
(900/1,100 mm width type)
125 126
VR
V IV
Hea
t R
eco
very
Ho
t W
ater
Sys
tem
VRV IV Heat Recovery Hot Water System
Outdoor Units
Specifications
RWHQ8TYM
RWHQ8TYM
RWHQ6TYM
RWHQ8TYM
RWHQ6TYM
RWHQ6TYM
RWHQ16THYM RWHQ18THYM RWHQ20THYM RWHQ22THYM RWHQ24THYMRWHQ12THYM RWHQ14THYM
RWHQ6TYM
RWHQ6TYM
RWHQ6TYM
RWHQ6TYM
RWHQ6TYM
RWHQ8TYM
RWHQ6TYM
RWHQ8TYM
RWHQ8TYM
RWHQ8TYM
RWHQ8TYM
RWHQ8TYM— — —
19.1(Brazing x 3)
19.1(Brazing x 3)
19.1(Brazing x 2)
19.1(Brazing x 2)
7.10 8.68 10.3 10.7 12.2 13.8 15.4
15 to 49
R-410A
185+185
6.4+6.4
60 61
3-phase 4-wire system, 380-415 V/380 V, 50/60 Hz
RWHQ8TYM
RWHQ8TYM
RWHQ12TYM
RWHQ8TYM
RWHQ10TYM
RWHQ12TYM
RWHQ8TYM
RWHQ12TYM
RWHQ12TYM
RWHQ8TYM
RWHQ12TYM
RWHQ14TYM
RWHQ8TYM
RWHQ14TYM
RWHQ14TYM
RWHQ12TYM
RWHQ12TYM
RWHQ14TYM
RWHQ12TYM
RWHQ14TYM
RWHQ14TYM
RWHQ8TYM
RWHQ8TYM
RWHQ10TYM
RWHQ26THYM RWHQ28THYM RWHQ30THYM RWHQ32THYM RWHQ34THYM RWHQ36THYM RWHQ38THYM RWHQ40THYM
19.1(Brazing x 3)
19.1(Brazing x 3)
15 to 49
R-410A
17.5 19.2 21.3 23.0 24.9 26.7 28.7 30.5
185+185+200 185+200+200 185+200+285 185+285+285 200+200+285 200+285+285
3-phase 4-wire system, 380-415 V/380 V, 50/60 Hz
MODEL
Combination units
Power supply
Btu/h
kW
kW
kW
m3/min
mm
kg
kg
dB(A)
°CDB
%
Cooling capacity
Power consumption
Capacity control
Casing colour
Type
Type
Charge
Compressor
Airflow rate
Dimensions (HxWxD)
Machine weight
Sound level
Operation range
Refrigerant
Motor output
109,000 131,000 153,000 164,000 186,000 207,000 229,000
32.0 38.4 44.8 48.0 54.4 60.8 67.2
10-100 7-100
Ivory white(5Y7.5/1)
Hermetically Sealed Scroll Type
248,000 267,000 286,000 305,000
Ivory white (5Y7.5/1)
Hermetically Sealed Scroll Type
327,000 348,000 365,000 389,000
72.8 78.3 83.9 89.4 95.9 102 107 114
6-100 5-100 4-100
119+119
34.9(Brazing) 41.3(Brazing)
12.7(Brazing) 15.9(Brazing)
28.6(Brazing) 34.9(Brazing)
119+157 157+157 119+119+119 119+119+157 119+157+157 157+157+157
(2.4x1)+(2.4x1)
(2.4x1)+(3.4x1)
(3.4x1)+(3.4x1)
(2.4x1)+(2.4x1)+(2.4x1)
(2.4x1)+(2.4x1)+(3.4x1)
(2.4x1)+(3.4x1)+(3.4x1)
(3.4x1)+(3.4x1)+(3.4x1)
(1,657x930x765)+(1,657x930x765) (1,657x930x765)+(1,657x930x765)+(1,657x930x765)
157+157+165
(3.4x1)+(3.4x1)+(4.1x1)
(1,657x930x765)+(1,657x930x765)+(1,657x930x765)
157+157+178
(3.4x1)+(3.4x1)+(5.2x1)
157+165+178
(3.4x1)+(4.1x1)+(5.2x1)
157+178+178
(3.4x1)+(5.2x1)+(5.2x1)
157+178+233 178+178+233 178+233+233157+233+233
(3.4x1)+(5.2x1)+(2.9x1)+(3.3x1)
(5.2x1)+(5.2x1)+(2.9x1)+(3.3x1)
(3.4x1)+(2.9x1)+(3.3x1)+(2.9x1)+(3.3x1)
(5.2x1)+(2.9x1)+(3.3x1)+(2.9x1)+(3.3x1)
(1,657x930x765)+(1,657x930x765)+(1,657x1,240x765)
(1,657x930x765)+(1,657x1,240x765)+(1,657x1,240x765)
(1,657x930x765)+(1,657x930x765)+(1,657x1,240x765)
(1,657x930x765)+(1,657x1,240x765)+(1,657x1,240x765)
High-COP Type
Standard Type
RWHQ6TYM RWHQ8TYM RWHQ10TYM RWHQ12TYM RWHQ14TYM RWHQ16TYM
54,600
16.0
3.55
76,400
22.4
5.13
95,500
28.0
7.22
16-100
114,000
33.5
8.93
15-100
136,000
40.0
10.8
11-100
154,000
45.0
12.9
10-100
57
6.5
59
6.8
60
10.3
61
10.4
2.4x1 3.4x1 4.1x1 5.2x1
119 157 165 178 233
(2.9x1)+(3.3x1) (3.6x1)+(3.7x1)
1,657x930x765 1,657x1,240x765
3-phase 4-wire system, 380-415 V/380 V, 50/60 Hz
Hermetically Sealed Scroll Type
12.7(Brazing) 19.1(Brazing) 22.2(Brazing)
15 to 49
R-410A
— — — — — —
Ivory white (5Y7.5/1)
MODEL
Power supply
Power consumption
Capacity control
Compressor
Dimensions (H×W×D)
Machine weight
Sound level
Refrigerant
Btu/h
kW
kW
%
kg
dB(A)
ºCDB
kg
kW
m3/min
mm
Charge
Type
Type
Liquid
Gas
mm
mm
mm
mm
Combination units
Cooling capacity
Motor output
Airflow rate
Operation range
Casing colour
19.1(Brazing)
19.1(Brazing)
Inlet pipe
Outlet pipe
Pipingconnections(Heat exchanger unit)
Pipingconnections(Indoor unit)
409,000
120
32.4
427,000
125
34.5
444,000
130
36.6
461,000
135
38.7
478,000
140
41.1
RWHQ14TYM
RWHQ14TYM
RWHQ14TYM
RWHQ14TYM
RWHQ14TYM
RWHQ16TYM
RWHQ14TYM
RWHQ16TYM
RWHQ16TYM
RWHQ16TYM
RWHQ16TYM
RWHQ16TYM
RWHQ16TYM
RWHQ16TYM
RWHQ18TYM
RWHQ42THYM RWHQ44THYM RWHQ46THYM RWHQ48THYM RWHQ50THYM
(1,657x1,240x765)+(1,657x1,240x765)+(1,657x1,240x765)
233+233+233
10.4+10.4+10.4
(2.9x1)+(3.3x1)+(2.9x1)+(3.3x1)+(2.9x1)+(3.3x1)
(2.9x1)+(3.3x1)+(2.9x1)+(3.3x1)+(3.6x1)+(3.7x1)
(2.9x1)+(3.3x1)+(3.6x1)+(3.7x1)+(3.6x1)+(3.7x1)
(3.6x1)+(3.7x1)+(3.6x1)+(3.7x1)+(3.6x1)+(3.7x1)
(3.6x1)+(3.7x1)+(3.6x1)+(3.7x1)+(4.4x1)+(4.0x1)
3-phase 4-wire system, 380-415 V/380 V, 50/60 Hz
Hermetically Sealed Scroll Type
15 to 49
R-410A
Ivory white (5Y7.5/1)
MODEL
Power supply
Power consumption
Capacity control
Compressor
Dimensions (H×W×D)
Machine weight
Sound level
Refrigerant
Btu/h
kW
kW
%
kg
dB(A)
ºCDB
kg
kW
m3/min
mm
Type
Combination units
Cooling capacity
Motor output
Airflow rate
Operation range
Casing colour
19.1(Brazing x 3) 19.1(Brazing x 3)
5958
185+185+185
6.4+6.4+6.4
28.6(Brazing)
61
6.4+6.4+6.5 6.4+6.4+6.8
62
6.4+6.5+6.8 6.4+6.8+6.8
63
6.4+6.8+10.3 6.4+10.3+10.3
64
6.8+6.8+10.3 6.8+10.3+10.3
19.1(Brazing)
3-1004-100
10.3+10.3+10.3 10.3+10.3+10.4
65
285+285+285
10.3+10.4+10.4
66
10.4+10.4+10.5
19.1(Brazing) 41.3(Brazing)
20-100
55
185
6.4
56
9.5(Brazing)
Pipingconnections(Heat exchanger unit)
Pipingconnections(Indoor unit)
Charge
Liquid
Gas
mm
mm
mm
mm
Inlet pipe
Outlet pipe
Type
Pipingconnections(Heat exchanger unit)
Pipingconnections(Indoor unit)
Liquid
Gas
mm
mm
mm
mm
Inlet pipe
Outlet pipe
285200
Notes: Specifications are based on the following conditions;• Cooling: Indoor temp.: 27°CDB, 19°CWB, Outdoor temp.: 35°CDB, Equivalent piping length: 7.5 m, Level difference: 0 m.
•Sound level: Anechoic chamber conversion value, measured at a point 1 m in front of the unit at a height of 1.5 m.During actual operation, these values are normally somewhat higher as a result of ambient conditions and oil recovery mode. When there is concern for noise to the surrounding area such as residences, we recommend investigating the installation location and taking soundproofing measures.
VRV IV Heat Recovery Hot Water System
127 128
VR
V IV
Hea
t R
eco
very
Ho
t W
ater
Sys
tem
VRV IV Heat Recovery Hot Water System
Outdoor Units
Specifications
RWHQ8TYM
RWHQ14TYM
RWHQ8TYM
RWHQ12TYM
RWHQ8TYM
RWHQ10TYM
RWHQ22TNYM RWHQ24TNYM RWHQ26TNYM RWHQ28TNYM RWHQ30TNYMRWHQ18TNYM RWHQ20TNYM
RWHQ10TYM
RWHQ14TYM
RWHQ12TYM
RWHQ14TYM
RWHQ14TYM
RWHQ14TYM
RWHQ14TYM
RWHQ16TYM
— — — — — — — —
19.1(Brazing x 2)
19.1(Brazing x 2)
12.4 14.1 15.9 18.0 19.7 21.6 23.7
15 to 49
R-410A
185+200 185+285 200+285 285+285
63 64
3-phase 4-wire system, 380-415 V/380 V, 50/60 Hz
RWHQ10TYM
RWHQ12TYM
RWHQ12TYM
RWHQ12TYM
RWHQ12TYM
RWHQ12TYM
RWHQ8TYM
RWHQ12TYM
RWHQ18TYM
RWHQ12TYM
RWHQ12TYM
RWHQ16TYM
RWHQ12TYM
RWHQ14TYM
RWHQ16TYM
RWHQ12TYM
RWHQ16TYM
RWHQ16TYM
RWHQ14TYM
RWHQ14TYM
RWHQ18TYM
RWHQ14TYM
RWHQ18TYM
RWHQ32TNYM RWHQ34TNYM RWHQ36TNYM RWHQ38TNYM RWHQ40TNYM RWHQ42TNYM RWHQ44TNYM RWHQ46TNYM
19.1(Brazing x 3)
19.1(Brazing x 3)
15 to 49
R-410A
26.1 25.1 26.8 29.4 30.8 32.6 34.7 36.9
285+285 200+200+200 185+200+285 200+200+285 200+285+285 285+285+285
3-phase 4-wire system, 380-415 V/380 V, 50/60 Hz
MODEL
Combination units
Power supply
Btu/h
kW
kW
kW
m3/min
mm
kg
kg
dB(A)
°CDB
%
Cooling capacity
Power consumption
Capacity control
Casing colour
Type
Type
Charge
Compressor
Airflow rate
Dimensions (HxWxD)
Machine weight
Sound level
Operation range
Refrigerant
Motor output
172,000 191,000 213,000 232,000 251,000 273,000 290,000
50.4 55.9 62.4 68.0 73.5 80.0 85.0
8-100 7-100 6-100 5-100
Ivory white (5Y7.5/1)
Hermetically Sealed Scroll Type
307,000 324,000 345,000 362,000
Ivory white (5Y7.5/1)
Hermetically Sealed Scroll Type
382,000 406,000 423,000 444,000
90.0 95.0 101 106 112 119 124 130
5-100 4-100 3-100
157+165
34.9(Brazing) 41.3(Brazing)
19.1(Brazing)15.9(Brazing)
28.6(Brazing) 34.9(Brazing)
157+178 157+233 165+233 178+233 233+233
(3.4x1)+(4.1x1)
(3.4x1)+(5.2x1)
(3.4x1)+(2.9x1)+(3.3x1)
(4.1x1)+(2.9x1)+(3.3x1)
(5.2x1)+(2.9x1)+(3.3x1)
(2.9x1)+(3.3x1)+(2.9x1)+(3.3x1)
(2.9x1)+(3.3x1)+(3.6x1)+(3.7x1)
(1,657x930x765)+(1,657x930x765)
(1,657x1,240x765)+(1,657x1,240x765)
(1,657x1,240x765)+(1,657x1,240x765)(1,657x930x765)+(1,657x1,240x765)
233+233
(2.9x1)+(3.3x1)+(4.4x1)+(4.0x1)
(1,657x930x765)+(1,657x930x765)+(1,657x930x765)
(1,657x930x765)+(1,657x930x765)+(1,657x1,240x765)
(1,657x930x765)+(1,657x1,240x765)+(1,657x1,240x765)
165+178+178
(4.1x1)+(5.2x1)+(5.2x1)
178+178+178
(5.2x1)+(5.2x1)+(5.2x1)
157+178+233
(3.4x1)+(5.2x1)+(4.4x1)+(4.0x1)
178+178+233 233+233+233178+233+233
(5.2x1)+(5.2x1)+(3.6x1)+(3.7x1)
(5.2x1)+(3.6x1)+(3.7x1)+(3.6x1)+(3.7x1)
(5.2x1)+(2.9x1)+(3.3x1)+(3.6x1)+(3.7x1)
(2.9x1)+(3.3x1)+(2.9x1)+(3.3x1)+(4.4x1)+(4.0x1)
(1,657x1,240x765)+(1,657x1,240x765)+(1,657x1,240x765)
Standard Type
Space Saving TypeStandard Type
RWHQ18TYM RWHQ20TYM RWHQ22TSYM RWHQ24TSYM
171,000
50.0
15.3
10-100
191,000
56.0
17.9
210,000
61.5
16.2
8-100
229,000
67.0
17.9
(4.4x1)+(4.0x1) (4.6x1)+(5.5x1) (4.1x1)+(5.2x1) (5.2x1)+(5.2x1)
233 268 165+178 178+178
1,657x1,240x765 (1,657x930x765)+(1,657x930x765)
3-phase 4-wire system, 380-415 V/380 V, 50/60 Hz
Hermetically Sealed Scroll Type
28.6(Brazing) 34.9(Brazing)
15 to 49
R-410A
— —
Ivory white (5Y7.5/1)
RWHQ10TYM RWHQ12TYM
RWHQ12TYM RWHQ12TYM
— —
MODEL
Power supply
Power consumption
Capacity control
Compressor
Dimensions (H×W×D)
Machine weight
Sound level
Refrigerant
Btu/h
kW
kW
%
kg
dB(A)
ºCDB
kg
kW
m3/min
mm
Charge
Type
Type
Liquid
Gas
mm
mm
mm
mm
Combination units
Cooling capacity
Motor output
Airflow rate
Operation range
Casing colour
19.1(Brazing)
19.1(Brazing)
Inlet pipe
Outlet pipe
Pipingconnections(Heat exchanger unit)
Pipingconnections(Indoor unit)
461,000
135
39.0
478,000
140
41.4
495,000
145
43.5
512,000
150
45.9
532,000
156
48.5
RWHQ14TYM
RWHQ16TYM
RWHQ18TYM
RWHQ14TYM
RWHQ18TYM
RWHQ18TYM
RWHQ16TYM
RWHQ18TYM
RWHQ18TYM
RWHQ18TYM
RWHQ18TYM
RWHQ18TYM
RWHQ18TYM
RWHQ18TYM
RWHQ20TYM
RWHQ48TNYM RWHQ50TNYM RWHQ52TNYM RWHQ54TNYM RWHQ56TNYM
(1,657x1,240x765)+(1,657X1,240x765)+(1,657x1,240x765)
10.5+10.5+10.5
(2.9x1)+(3.3x1)+(3.6x1)+(3.7x1)+(4.4x1)+(4.0x1)
(2.9x1)+(3.3x1)+(4.4x1)+(4.0x1)+(4.4x1)+(4.0x1)
(3.6x1)+(3.7x1)+(4.4x1)+(4.0x1)+(4.4x1)+(4.0x1)
(4.4x1)+(4.0x1)+(4.4x1)+(4.0x1)+(4.4x1)+(4.0x1)
(4.4x1)+(4.0x1)+(4.4x1)+(4.0x1)+(4.6x1)+(5.5x1)
3-phase 4-wire system, 380-415 V/380 V, 50/60 Hz
Hermetically Sealed Scroll Type
15 to 49
R-410A
Ivory white (5Y7.5/1)
MODEL
Power supply
Power consumption
Capacity control
Compressor
Dimensions (H×W×D)
Machine weight
Sound level
Refrigerant
Btu/h
kW
kW
%
kg
dB(A)
ºCDB
kg
553,000
162
51.1
573,000
168
53.7
(4.4x1)+(4.0x1)+(4.6x1)+(5.5x1)+(4.6x1)+(5.5x1)
(4.6x1)+(5.5x1)+(4.6x1)+(5.5x1)+(4.6x1)+(5.5x1)
RWHQ18TYM
RWHQ20TYM
RWHQ20TYM
RWHQ58TNYM
RWHQ20TYM
RWHQ20TYM
RWHQ20TYM
RWHQ60TNYM
kW
m3/min
mm
Type
Combination units
Cooling capacity
Motor output
Airflow rate
Operation range
Casing colour
19.1(Brazing x 3) 19.1(Brazing x 3)
61 6260
10.3+10.410.3+10.36.8+10.36.5+10.36.4+10.36.4+6.5 6.4+6.8
64 63
10.3+10.5 6.5+6.8+6.8
64
6.8+6.8+6.8 6.4+6.8+10.5 6.8+6.8+10.4 6.8+10.3+10.4
65 66
6.8+10.4+10.4 10.3+10.3+10.5
19.1(Brazing)
3-100
10.3+10.4+10.5 10.3+10.5+10.5
66
320+320+320285+320+320285+285+320285+285+285
268+268+268233+268+268233+233+268233+233+233
10.4+10.5+10.5
67 68 69 70
10.5+10.5+11.8 10.5+11.8+11.8 11.8+11.8+11.8
19.1(Brazing) 41.3(Brazing)
62
285 320
10.5 11.8 6.8+6.86.5+6.8
65 61 62
15.9(Brazing)
Pipingconnections(Heat exchanger unit)
Pipingconnections(Indoor unit)
Charge
Liquid
Gas
mm
mm
mm
mm
Inlet pipe
Outlet pipe
Type
Pipingconnections(Heat exchanger unit)
Pipingconnections(Indoor unit)
Liquid
Gas
mm
mm
mm
mm
Inlet pipe
Outlet pipe
200+200
19.1(Brazing x 2)
19.1(Brazing x 2)
19.1(Brazing x 2)
19.1(Brazing x 2)
Notes: Specifications are based on the following conditions;• Cooling: Indoor temp.: 27°CDB, 19°CWB, Outdoor temp.: 35°CDB, Equivalent piping length: 7.5 m, Level difference: 0 m.
• Sound level: Anechoic chamber conversion value, measured at a point 1 m in front of the unit at a height of 1.5 m.During actual operation, these values are normally somewhat higher as a result of ambient conditions and oil recovery mode. When there is concern for noise to the surrounding area such as residences, we recommend investigating the installation location and taking soundproofing measures.
VRV IV Heat Recovery Hot Water System
129 130
VR
V IV
Hea
t R
eco
very
Ho
t W
ater
Sys
tem
VRV IV Heat Recovery Hot Water System
Outdoor Units
Specifications
Notes: Specifications are based on the following conditions;• Cooling: Indoor temp.: 27°CDB, 19°CWB, Outdoor temp.: 35°CDB, Equivalent piping length: 7.5 m, Level difference: 0 m.• Sound level: Anechoic chamber conversion value, measured at a point 1 m in front of the unit at a height of 1.5 m.
During actual operation, these values are normally somewhat higher as a result of ambient conditions and oil recovery mode. When there is concern for noise to the surrounding area such as residences, we recommend investigating the installation location and taking soundproofing measures.
RWHQ12TYM
RWHQ18TYM
RWHQ12TYM
RWHQ16TYM
RWHQ8TYM
RWHQ18TYM
RWHQ30TSYM RWHQ32TSYM RWHQ34TSYM RWHQ36TSYMRWHQ26TSYM RWHQ28TSYM
RWHQ12TYM
RWHQ20TYM
RWHQ16TYM
RWHQ18TYM
RWHQ18TYM
RWHQ18TYM— — — — — — — —
19.1(Brazing x 2)
19.1(Brazing x 2)
19.1(Brazing x 2)
19.1(Brazing x 2)
20.4 21.8 24.2 26.8 28.2 30.6
15 to 49
R-410A
185+285 200+285 200+320 285+285
65
3-phase 4-wire system, 380-415 V/380 V, 50/60 Hz
RWHQ20TYM
RWHQ20TYM
RWHQ12TYM
RWHQ12TYM
RWHQ18TYM
RWHQ12TYM
RWHQ12TYM
RWHQ20TYM
RWHQ12TYM
RWHQ16TYM
RWHQ18TYM
RWHQ12TYM
RWHQ18TYM
RWHQ18TYM
RWHQ12TYM
RWHQ18TYM
RWHQ20TYM
RWHQ18TYM
RWHQ20TYM
RWHQ38TSYM RWHQ40TSYM RWHQ42TSYM RWHQ44TSYM RWHQ46TSYM RWHQ48TSYM RWHQ50TSYM
19.1(Brazing x 3)
19.1(Brazing x 3)
15 to 49
R-410A
33.2 35.8 33.2 35.8 37.1 39.5 42.1
285+320 200+200+285320+320 200+200+320 200+285+285 200+285+320
3-phase 4-wire system, 380-415 V/380 V, 50/60 Hz
MODEL
Combination units
Power supply
Btu/h
kW
kW
kW
m3/min
mm
kg
kg
dB(A)
°CDB
%
Cooling capacity
Power consumption
Capacity control
Casing colour
Type
Type
Charge
Compressor
Airflow rate
Dimensions (HxWxD)
Machine weight
Sound level
Operation range
Refrigerant
Motor output
247,000 268,000 285,000 305,000 324,000 341,000
72.4 78.5 83.5 89.5 95.0 100
7-100 6-100 5-100
Ivory white (5Y7.5/1)
Hermetically Sealed Scroll Type
362,000 382,000 399,000 420,000
123
Ivory white (5Y7.5/1)
Hermetically Sealed Scroll Type
440,000 457,000 478,000
106 112 117 129 134 140
4-100 3-100
157+233
41.3(Brazing)
19.1(Brazing)
34.9(Brazing) 41.3(Brazing)
178+233 178+268 233+233
(3.4x1)+(4.4x1)+(4.0x1)
(5.2x1)+(3.6x1)+(3.7x1)
(5.2x1)+(4.4x1)+(4.0x1)
(5.2x1)+(4.6x1)+(5.5x1)
(3.6x1)+(3.7x1)+(4.4x1)+(4.0x1)
(4.4x1)+(4.0x1)+(4.4x1)+(4.0x1)
(1,657x1,240x765)+(1,657x1,240x765)(1,657x1,240x765)+(1,657x1,240x765)(1,657x930x765)+(1,657x1,240x765)
233+268
(4.4x1)+(4.0x1)+(4.6x1)+(5.5x1)
(1,657x930x765)+(1,657x930x765)+(1,657x1,240x765)
(1,657x930x765)+(1,657x1,240x765)+(1,657x1,240x765)
268+268
(4.6x1)+(5.5x1)+(4.6x1)+(5.5x1)
178+178+233
(5.2x1)+(5.2x1)+(4.4x1)+(4.0x1)
178+178+268
(5.2x1)+(5.2x1)+(4.6x1)+(5.5x1)
178+233+233 178+233+268
(5.2x1)+(3.6x1)+(3.7x1)+(4.4x1)+(4.0x1)
(5.2x1)+(4.4x1)+(4.0x1)+(4.6x1)+(5.5x1)
(5.2x1)+(4.4x1)+(4.0x1)+(4.4x1)+(4.0x1)
Space Saving Type
6663 64
10.5+10.510.4+10.56.8+11.86.8+10.56.4+10.5 6.8+10.4
67 68
10.5+11.8 11.8+11.8
65 67
6.8+6.8+10.5 6.8+6.8+11.8 6.8+10.4+10.5 6.8+10.5+10.5
66 67
6.8+10.5+11.8
19.1(Brazing)
Pipingconnections(Heat exchanger unit)
Pipingconnections(Indoor unit)
Liquid
Gas
mm
mm
mm
mm
Inlet pipe
Outlet pipe
VRV IV Heat Recovery Hot Water System
131 132
VR
V IV
Hea
t R
eco
very
Ho
t W
ater
Sys
tem
VRV IV Heat Recovery Hot Water System
Outdoor Units
Serpentine heat exchanger unit (HWHQ30A)
°C
L/min
°C
L/min
kW
kg
mm
mm
mm
mm
m
MPa
m
mm
RWHQ6TYM+HWHQ30A
RWHQ8TYM+HWHQ30A
RWHQ10TYM+HWHQ30A
RWHQ12TYM+HWHQ30A
RWHQ14TYM+HWHQ30A
RWHQ16TYM+HWHQ30A
RWHQ18TYM+HWHQ30A
RWHQ20TYM+HWHQ30A
40
10
20-65
5-20
27
19.1 (Braze)
19.1 (Braze)
25.4 (Screw)
25.4 (Screw)
2 (5)
0.5
0.2
Ivory white (5Y7.5/1)
446 × 306 × 765
Model Name( RWHQ-TYM, HWHQ30A )
Single Heat Exchanger Unit
Rated inlet temperature
Rated water flow
Range of inlet temperature
Range of water flow
Rated Hot-water capacity *1
Machine weight
Diameter of Refrigerant pipe (Gas)
Diameter of Refrigerant pipe (Liquid)
Diameter of water pipe (Inlet)
Diameter of water pipe (Outlet)
Piping length (max)
Design pressure (Water side)
Loss of Head *2
Casing colour
Dimensions (H×W×D)
3.2 3.3 3.3 3.5 3.7 4.0 4.2 4.4
RWHQ6TYM+HWHQ30Ax2
RWHQ8TYM+HWHQ30Ax2
RWHQ10TYM+HWHQ30Ax2
RWHQ12TYM+HWHQ30Ax2
RWHQ14TYM+HWHQ30Ax2
RWHQ16TYM+HWHQ30Ax2
RWHQ18TYM+HWHQ30Ax2
RWHQ20TYM+HWHQ30Ax2
°C
L/min
°C
L/min
kW
kg
mm
mm
mm
mm
m
MPa
m
mm
40
20 (10 × 2)
20-65
10-40 (5-20 × 2)
54 (27 × 2)
19.1 (Braze) × 2
19.1 (Braze) × 2
25.4 (Screw) × 2
25.4 (Screw) × 2
2 (5)
0.5
0.2
Ivory white (5Y7.5/1)
(446 × 306 × 765) + (446 × 306 × 765)
Model Name( RWHQ-TYM, HWHQ30A )
Double Heat Exchanger Unit
Rated inlet temperature
Rated water flow
Range of inlet temperature
Range of water flow
Rated Hot-water capacity *1
Machine weight
Diameter of Refrigerant pipe (Gas)
Diameter of Refrigerant pipe (Liquid)
Diameter of water pipe (Inlet)
Diameter of water pipe (Outlet)
Piping length (max)
Design pressure (Water side)
Loss of Head *2
Casing colour
Dimensions (H×W×D)
5.4 5.6 5.6 5.9 6.2 6.8 7.1 7.4
Pipe length restriction of VRV IV Heat Recovery Hot Water SystemPipe length restriction of VRV IV Heat Recovery Hot Water System
Notes: It is necessary to satisfy the water standard of Daikin for the water that is used. In the case that the water standard is not satisfied, special measures are required. Please contact your local sales office for details. *1: [ Cooling ] Indoor temp.: 27°CDB, 19°CWB, Outdoor temp.: 35°CDB, Inlet water temperature 40°C, Water flow 10L/min, Indoor load 100%, Outdoor-Heat Exchanger Unit 2m.*2: Water flow 10L/min.
Notes: It is necessary to satisfy the water standard of Daikin for the water that is used. In the case that the water standard is not satisfied, special measures are required. Please contact your local sales office for details. *1: [ Cooling ] Indoor temp.: 27°CDB, 19°CWB, Outdoor temp.: 35°CDB, Inlet water temperature 40°C, Water flow 10L/min,Indoor load 100%, Outdoor-Heat Exchanger Unit 2m.*2: Water flow 10L/min.
3 mMax. allowable level difference B Between outdoor unit and heat exchanger unit level
5 mMax. allowable piping length A Between outdoor unit and heat exchanger unit length
3 mMax. allowable level difference B Between outdoor unit and heat exchanger unit level
3 mMax. allowable level difference C Between heat exchanger units
5 mMax. allowable piping length A Between outdoor unit and heat exchanger unit length
Serpentine heat exchanger unit
Serpentine heat exchanger unit
Piping
Outdoor unitOutdoor unit
Piping
Indoor side(as with VRV IV)
B
C
A
A
Serpentine heat exchanger unit
Serpentine heat exchanger unit
Piping
Outdoor unitOutdoor unit
Piping
Indoor side(as with VRV IV)
B
A
A
VRV IV Heat Recovery Hot Water System
133 134
INDOOR UNIT LINEUPDaikin offers a wide range of indoor units including both VRV and residential models responding to variety of needs of our customers that require air-conditioning solutions.
FXAQ-AVM
Wall Mounted Type
Stylish flat panel design harmonised with your interior décor.
163Page
FXVQ-NY1FXVQ-NY16
(high static pressure type)
Floor Standing Duct Type
Large airflow type for large spaces.
167Page
VAM-GJVE
185Page
Cooling OnlyFTKS-DVMFTKS-BVMAFTKS-FVM
Heat PumpFTXS-DVMAFTXS-EVMAFTXS-FVMA
Wall Mounted Type
Stylish flat panel harmonises with your interior décor
173Page Heat Reclaim Ventilator
181Page
Heat Reclaim Ventilator with DX-Coil and Humidifier
FXHQ-AVM
FXHQ-MAVE
Ceiling Suspended Type
Slim body with quiet and wide airflow.
162Page
FXPQ-AVN
Spot Air Conditioner
Personal air comfort delivered to large spaces
168Page
AHUR
Air Handling Unit
Integrate your air handling unit in a total solution for large size spaces such as factories and large stores.
175Page
VKM-GA(M)V1
Cooling OnlyFTKJ-NVMVWHeat PumpFTXJ-NVMVW
Cooling OnlyFTKJ-NVMVSHeat PumpFTXJ-NVMVS
Wall Mounted Type
Elegant appearance with European style
172Page
FXUQ-AVEB
4-Way Flow Ceiling Suspended Type
Slim and stylish design, optimum air distribution, installation without ceiling cavity
161Page
FXNQ-MAVE
Concealed Floor Standing Type
Suitable for perimeter zone air conditioning
166Page
FXLQ-MAVE
Floor Standing Type
Suitable for perimeter zone air conditioning
165Page
FXBQ-PVEFXBPQ-PVE
Clean Room Air Conditioner
Suitable for hospitals and other clean spaces
169Page
Heat PumpCDXS-EAVMAFDXS-CVMA
Cooling OnlyFDKS-EAVMBFDKS-C(A)VMB
Slim Ceiling Concealed Duct Type
Slim and smooth design suitsyour shallow ceiling
171Page
FXZQ-AVM
Compact Multi Flow Cassette Type
Quiet, compact, and designed for user comfort
145Page
FXDSQ-AVM
3D Airflow Duct with Sensing Type
3D airflow with sensing function for comfort and energy savings
151Page
FXSQ-PAVE
Middle Static Pressure Duct Type
Middle static pressure and slim design allow flexible installations.
155Page
FXMQ-MFV1
Outdoor-Air Processing Unit
Combine fresh air treatment and air conditioning, supplied from a single system.
177Page
FXFQ-AVM
Round Flow Cassette Type
360° airflow for improved comfort
141Page
FXEQ-AV36
Single Flow Cassette Type
Slim design for flexible installation
149Page
FXDQ-SPV1
Slim Duct (Compact) Type
Slim and compact design for easy andflexible installation
154Page
FXMQ-PVM
High Static Pressure Duct Type
High static pressure allowsfor flexible duct design.
159Page
FXFSQ-AVM
Round Flow Cassette with Sensing Type
Comfort and energy savings by sensing functions
135Page
FXCQ-AVM
Double Flow Cassette Type
Thin, lightweight, and easy to install in narrow ceiling spaces
147Page
FXDQ-NDVE(T)
FXDQ-PDVE(T)
Slim Duct (Standard) Type
Slim design, quietness and ideal for drop-ceilings
153Page
FXMQ-PAVE
Middle-High Static Pressure Duct Type
Middle and high static pressureallows for flexible duct design.
157Page
Residential indoor units with connection to BP units
Air treatment equipment
VRV indoor units
135 136
Ind
oo
r U
nit
s
VRV Indoor Units
Comfort and energy saving by sensing functions
Sensing sensor stop mode (default: OFF)
Based on preset user conditions, the system automatically stops operation if the room is unoccupied.
*Adjustment is possible for shift time and set temperature by local setting.
Round Flow Cassette with Sensing Type
Auto airflow function
Sensing sensor modeSensors detecting human presence and temperatures near the floor provide comfortable spaces without uneven temperatures.
Comfort and energy saving preventing over cooling/heating
Sensing sensor low mode (default: OFF)
When there are no people in a room, the set temperature is shifted automatically.
Daikin advanced sensing technology
A
CB D
Detecting the average temperature of indoor floor
Detecting the presence of people in 4 areas
Without sensing function With sensing function
Even when room temperature is detected at 30°C, the floor temperature may be as low as 20°C, causing the feet area to be cold.
To prevent an excessive drop in temperature, room temperature is calculated at 27°C when people are in the vicinity.
The sensing function controls airflow to reduce drafts and ensure the feet area is warm.
Uneven temperatures enable minimal drafts, but the feet area becomes cold.
When you try to eliminate uneven temperatures, drafts become strong.
24°C near floor
20°C near floor
20°C near floor
• Cooling setpoint: 26°C
• Shift temperature: 1.0°C
• Shift time: 30 min.
• Limit cooling temperature: 30°C
282726
Occupied UnoccupiedAutomatically reverts when people return.
Setp
oin
t (°
C)
Time
26°C26°C 26°C26°C27°C27°C
28°C28°C
Optimal air direction by “Auto”
When human presence not detected.
Optimal air direction by “Auto”
Swing (narrow)
When human presence detected.Deliver cool air to users
Blown downward
When human presence not detected.
Blown downward Blownhorizontally
When human presence detected.Prevent cold drafts
After30 min
Afteranother 30 min
*When human is not detected for 5 minutes, the unit automatically returns to controlling the flaps for an unoccupied room.
Direct Airflow (default: OFF) Cooling Dry
Draft prevention function (default: OFF)
Heating
Infrared presence sensor
Infrared floor sensor
Example
20°C near floor
30°C near ceiling
17°C near floor
30°C near ceiling
Comfort and energy saving by sensing functions
FXFSQ-A
dual sensors
Energy saving
Comfort
Comfort
toocoldtoocold
feet are coldfeet are cold
CoolingCooling
strong draftstrong draft
HeatingHeating
137 138
Ind
oo
r U
nit
s
VRV Indoor Units
Cooloutdoor
air
Hot outdoor
air
Easy setting is possible with a wired remote controller
Airflow direction can be individually adjusted for each air discharge outlet to deliver optimal air distribution.
Comfort is provided to the entire room by individual setting corresponding to 4-way flow conditions.
Round Flow Cassette with Sensing Type
Configurations of circulation airflowComfortable air conditioning for all room layouts and conditions
Circulation airflow* Individual airflow direction control
During 2-way horizontal flow
Cools by airflow blocking outhot air near windows and walls.
Cool air moves down along thewalls and to every corner of the room.
Comfort without cold air pockets at floor level.
Airflow effectively avoids blowing air directly on people.
30.029.028.027.026.025.024.023.022.021.020.0
30.029.028.027.026.025.024.023.022.021.020.0
Comparison ConditionsRoom size: Width 7.5m x depth 7.5m x height 2.6m
Indoor unit capacity: 71 classOutdoor air temperature: 35°C
Airflow rate and air direction: high / swing
Circulation Airflow (2-way horizontal + 4-way swing)
4-way cassette (Swing)
Performs repeatedlyOperation (at start)
When the target temperature is reached, normal operation (all-round flow) begins.
Circulation airflow cools the entire room to deliver comfort that never feels cold.
Approx. 5%energy savings*
Approx. 15%energy savings*
Cooling
During 2-way horizontal flow
Circulation Airflow (2-way horizontal + 4-way swing)
4-way cassette (Down blow)
Circulation airflow warms the entire room starting from your feet.
Heating
Warms areas around walls using
2-way horizontal flow
Warms the middle of the room using4-way down flow
Warms areas around walls using
2-way horizontal flow
Warms the middle of the room using4-way down flow
Airflow direction changes
Comparison ConditionsRoom size: Width 7.5m x depth 7.5m x height 2.6m
Indoor unit capacity: 71 classOutdoor air temperature: 5°C
Airflow rate and air direction: high / Down blow
30.028.026.024.022.020.018.016.014.012.010.0
30.028.026.024.022.020.018.016.014.012.010.0
* Calculated under the following comparison conditions:When the average temperature at a height of 0.6m
above the floor reaches set temperature. (22°C)
* Calculated under the following comparison conditions:When the average temperature at a height of 0.6m
above the floor reaches set temperature. (26°C)
Cools areas around walls using
2-way horizontal flow
Cools entire room using 4-way swing flow
Cools areas around walls using
2-way horizontal flow
Cools entire room using 4-way swing flow
Performs repeatedlyOperation (at start)
Airflow direction changes
When the target temperature is reached, normal operation (all-round flow) begins.
Warms by airflow blocking outcool air near windows and walls.
Airflow quickly makes the entire room warm and comfortable.
Warmth reliably reaches feet.
Airflow effectively avoids blowing air directly on people.
Individual airflow settings
No individual setting (Auto airflow)Position 0 (Highest point)Position 1Position 2Position 3Position 4 (Lowest point)Swing
Individual settings are possible as stated above.
No individual setting (Auto airflow)
Swing (Up/down)
Position 0(Fixed airflow to highest position)
Position 4(Fixed airflow to the lowest position)
SwingSwing is set for meetings near the windows.
Position 0The airflow is at the highest setting (Position 0) for people who dislike air blowing directly on them.
Blow reduced for areas with few people.
Large blow is provided to meeting areas near windows.
* Applicable when wired remote controller BRC1E63 is used.
No individual setting(Auto airflow)
No individual setting(Auto airflow)
reduce uneven temperatures
reduce uneven temperatures
* Conditions apply for the circulation airflow function. Please contact your local sales office for details.
139 140
Ind
oo
r U
nit
s
VRV Indoor Units
From All-round flow to 2-way flow, various airflow patterns available.
Suitable for high ceilings
Round Flow Cassette with Sensing Type
Comfort Panel (Option)
Installable in tight ceiling spaces
Min. of 261 mm* ceiling space when using standard panel.* For FXFSQ25-80A models.
Drain pump is equipped as standard accessory with 850 mm lift.
Quick and easy installation
Drain pan and drain water check
The condition of the drain pan and drain water can be checked by removing the suction grille and drain plug.
Easy maintenance
Silver ion anti-bacterial drain pan
Filter has anti-mould and antibacterial treatment
Prevents the growth of slime, bacteria, and mould that cause odours and clogging.* Drain pan should be changed once every two to three years.
Cleanliness
Other functions
Even in spaces with high ceilings, a comfortable airflow is carried down to the floor level.
3-way flow L-shaped 2-way flow Opposite 2-way flow
(E.g., installed in a corner) (E.g., installed in a long room)(E.g., installed near a wall)(E.g., installed in middle of ceiling)4-way flow also possible.
All-round flow
Drain outlet(with rubber plug)
Standard panel with sensingBYCQ125EEF (Fresh White)
Standard panel with sensingBYCQ125EEK (Black)
Specifications
0.061
2.8
9,600
3.6
12,300
4.5
15,400
5.6
19,100
kW
Btu/h
Power supply
Cooling capacity
1-phase, 220-240 V/220-230 V, 50/60 Hz
7.1
24,200
11.2
38,200
9.0
30,700
14.0
47,800
16.0
54,600
3.2
10,900
4.0
13,600
5.0
17,100
6.3
21,500
kW
Btu/hHeating capacity
8.0
27,300
12.5
42,700
10.0
34,100
16.0
54,600
FXFSQ25AVM FXFSQ32AVM FXFSQ40AVM FXFSQ50AVMMODEL FXFSQ63AVM FXFSQ100AVMFXFSQ80AVM FXFSQ125AVM FXFSQ140AVM
6.4
12.7 15.9
9.5
0.028 0.035 0.056kWPower consumption
0.194
19
459/441/406/388/353
30/29.5/28.5/28/27
13/12.5/11.5/11/10
600/477/441/424/388
35/29.5/29/28/27
17/13.5/12.5/12/11
812/724/671/512/388
38/35/34.5/29.5/27
23/20.5/19/14.5/11
VP25 (External Dia. 32/Internal Dia. 25)
mm
kg
mm
dB(A)
cfm
m3/min
Drain
Gas (Flare)
Liquid (Flare)
Casing
Sound level (H/HM/M/ML/L)
Airflow rate (H/HM/M/ML/L)
Dimensions (H×W×D)
Machine weight
Piping connections
256×840×840 298×840×840
Galvanised steel plate
830/741/706/565/477
38/36/35.5/31.5/28
23.5/21/20/16/13.5
1,183/1,077/953/830/741
44/41/38/35/33
33.5/30.5/27/23.5/21
865/777/724/706/530
39/37/36/35.5/31
24.5/22/20.5/20/15
1,218/1,112/1,006/900/812
45/42.5/39.5/37/35
34.5/31.5/28.5/25.5/23
1,253/1,147/1,041/935/812
46/43.5/40.5/38/35
35.5/32.5/29.5/26.5/23
0.164 0.1700.092
0.0600.026 0.034 0.056 0.1830.144 0.1590.092
22 2524 26
Panel (Option)
kg
mm
Weight
Dimensions(H×W×D)
Model
50×950×950
5.5
BYCQ125EEF (Fresh White)
Standardpanelwith sensing
kg
mm
Weight
Dimensions(H×W×D)
Model
50×950×950
5.5
BYCQ125EEK (Black)
Cooling
Heating
*1. Applicable when sensing panel is installed.
Wired Wireless
—
—
—
—
—
—
—
BRC1E63 BRC7M635F(K) / BRC7M634F(K)Remote controller
Function List
High ceiling application
Swing pattern selection
Auto swing
Auto airflow rate
Switchable 5 step fan speed
Individual airflow direction control
Circulation airflow
Sensing sensor stop mode *1
Sensing sensor low mode *1
Direct airflow *1
Dual sensors *1
Notes: Specifications are based on the following conditions;• Cooling: Indoor temp.: 27°CDB, 19°CWB, Outdoor temp.: 35°CDB, Equivalent piping length: 7.5 m, Level difference: 0 m.• Heating: Indoor temp.: 20°CDB, Outdoor temp.: 7°CDB, 6°CWB, Equivalent piping length: 7.5 m, Level difference: 0 m.• Capacity of indoor unit is only for reference. Actual capacity of indoor unit is based on the total capacity index. (See Engineering Data Book for details.) • Sound level: Anechoic chamber conversion value, measured at a point 1.5 m downward from the unit centre.
During actual operation, these values are normally somewhat higher as a result of ambient conditions.
Just open the suction grille!
Note: For inquiries concerning auto grille panel installations, please contact your local dealer or Daikin representative.
850 mm
175 mm
141 142
Ind
oo
r U
nit
s
VRV Indoor Units
Comparison ConditionsRoom size: Width 7.5m x depth 7.5m x height 2.6m
Indoor unit capacity: 71 classOutdoor air temperature: 35°C
Airflow rate and air direction: high / swing4-way cassette (Swing)
30.029.028.027.026.025.024.023.022.021.020.0
30.029.028.027.026.025.024.023.022.021.020.0
Circulation Airflow (2-way horizontal + 4-way swing)
4-way cassette (Down blow)
Comparison ConditionsRoom size: Width 7.5m x depth 7.5m x height 2.6m
Indoor unit capacity: 71 classOutdoor air temperature: 5°C
Airflow rate and air direction: high / Down blow
30.028.026.024.022.020.018.016.014.012.010.0
30.028.026.024.022.020.018.016.014.012.010.0
Easy setting is possible with a wired remote controller
Airflow direction can be individually adjusted for each air discharge outlet to deliver optimal air distribution.
Comfort is provided to the entire room by individual setting corresponding to 4-way flow conditions.
Round Flow Cassette Type
Configurations of circulation airflow
Comfortable air conditioning for all room layouts and conditions
Individual airflow direction control
During 2-way horizontal flow
Comfort without cold air pockets at floor level.
When the target temperature is reached, normal operation (all-round flow) begins.
Circulation airflow cools the entire room to deliver comfort that never feels cold.
Approx. 5%energy savings*
Approx. 15%energy savings*
Cooling
During 2-way horizontal flow
Circulation airflow warms the entire room starting from your feet.
Heating
* Calculated under the following comparison conditions:When the average temperature at a height of 0.6m
above the floor reaches set temperature. (26°C)
When the target temperature is reached, normal operation (all-round flow) begins.
Warmth reliably reaches feet.
Individual airflow settings
No individual setting (Auto airflow)Position 0 (Highest point)Position 1Position 2Position 3Position 4 (Lowest point)Swing
Individual settings are possible as stated above.
No individual setting (Auto airflow)
Swing (Up/down)
Position 0(Fixed airflow to highest position)
Position 4(Fixed airflow to the lowest position)
SwingSwing is set for meetings near the windows.
Blow reduced for areas with few people.
Large blow is provided to meeting areas near windows.
* Applicable when wired remote controller BRC1E63 is used.
No individual setting(Auto airflow)
reduce uneven temperatures
reduce uneven temperatures
Performs repeatedlyOperation (at start)
Warms areas around walls using
2-way horizontal flow
Warms the middle of the room using4-way down flow
Warms areas around walls using
2-way horizontal flow
Warms the middle of the room using4-way down flow
Airflow direction changes
* Calculated under the following comparison conditions:When the average temperature at a height of 0.6m
above the floor reaches set temperature. (22°C)
Cools areas around walls using
2-way horizontal flow
Cools entire room using 4-way swing flow
Cools areas around walls using
2-way horizontal flow
Cools entire room using 4-way swing flow
Performs repeatedlyOperation (at start) Airflow
direction changes
Circulation airflow*
360° airflow for improved comfort
FXFQ-A
Circulation Airflow (2-way horizontal + 4-way swing)
Position 0The airflow is at the highest setting (Position 0) for people who dislike air blowing directly on them.
No individual setting(Auto airflow)
Cooloutdoor
air
Hot outdoor
air
Cools by airflow blocking outhot air near windows and walls.
Cool air moves down along thewalls and to every corner of the room.
Airflow effectively avoids blowing air directly on people.
Warms by airflow blocking outcool air near windows and walls.
Airflow quickly makes the entire room warm and comfortable.
Airflow effectively avoids blowing air directly on people.
* Conditions apply for the circulation airflow function. Please contact your local sales office for details.
143 144
Ind
oo
r U
nit
s
VRV Indoor Units
From All-round flow to 2-way flow, various airflow patterns available.
Suitable for high ceilings
Round Flow Cassette Type
Comfort Decoration Panel (Option)
Other functions
Even in spaces with high ceilings, a comfortable airflow is carried down to the floor level.
3-way flow L-shaped 2-way flow Opposite 2-way flow
(E.g., installed in a corner) (E.g., installed in a long room)(E.g., installed near a wall)(E.g., installed in middle of ceiling)4-way flow also possible.
All-round flow
Specifications
Decoration Panel (Option) Function List
Auto grille panel (option)
New designer panel
Grille panel can be lowered to a maximum of 3.9 m.BYCQ125EASF (Fresh White)
Standard panelBYCQ125EAF (Fresh White)
Standard panelBYCQ125EAK (Black)
Designer panelBYCQ125EAPF (Fresh White)
Close to ideal stylingNew designer panel
FLATFlatter styling:
Suction panel grid texture smoothed.
CLEANClean-cut form:
Soiling is hard to seeon smart-looking panel.
ROUNDSubtle distinction:
around suction inletssilvering is a tasteful touch.
kg
mm
Weight
Dimensions(H×W×D)
ModelStandardpanel
5.5
50×950×950
BYCQ125EAF (Fresh White ) / BYCQ125EAK (Black)
kg
mm
Weight
Dimensions(H×W×D)
ModelDesignerpanel
6.5
97×950×950
BYCQ125EAPF (Fresh White)
kg
mm
Weight
Dimensions(H×W×D)
ModelAutogrillepanel
8
105×950×950
BYCQ125EASF (Fresh White)
Wired Wireless
—
—
—
BRC1E63 BRC7M635F(K) / BRC7M634F(K)Remote controller
High ceiling application
Swing pattern selection
Auto swing
Auto airflow rate
Switchable 5 step fan speed
Individual airflow direction control
Circulation airflow
459/441/406/388/353
30/29.5/28.5/28/27
13/12.5/11.5/11/10
600/477/459/424/388
35/29.5/29/28/27
17/13.5/13/12/11
kW
Btu/h
Power supply
Cooling capacity
1-phase, 220-240 V/220-230 V, 50/60 Hz
2.8
9,600
3.6
12,300
4.5
15,400
5.6
19,100 24,200 30,700 38,200 47,800
7.1 9.0 11.2 14.0
54,600
16.0
kW
Btu/hHeating capacity
3.2
10,900
4.0
13,600
5.0
17,100
6.3
21,500 27,300 34,100 42,700 47,800
8.0 10.0 12.5 14.0
54,600
16.0
19 22 25 26
15.9
9.5
12.7
6.4
mm
kg
mm
dB(A)
cfm
m3/min
Drain
Gas (Flare)
Liquid (Flare)
Casing
Sound level (H/HM/M/ML/L)
Airflow rate (H/HM/M/ML/L)
Dimensions (H×W×D)
Machine weight
Piping connections
0.029 0.036 0.040kW
0.158 0.178 0.2030.063 0.096
0.027 0.036 0.040 0.150 0.166 0.1910.063 0.096
18/17/13.5/12.5/11
635/600/477/441/388
35/33.5/29.5/28.5/27
Galvanised steel plate
21/20/16/15/13.5
741/706/565/530/477
36/35.5/31.5/31/28
32/29/26/23/21
1,130/1,024/918/812/741
43/40.5/37.5/35/33
33/30.5/28/25.5/21
1,165/1,077/988/900/741
44/41.5/39/36.5/33
22.5/21.5/21/20/15
794/759/741/706/530
37/36.5/36/35.5/29.5
35.5/32.5/29.5/26.5/23
1,253/1,147/1,041/935/812
46/43.5/40.5/38/35
VP25 (External Dia. 32/Internal Dia. 25)
256×840×840 298×840×840
MODEL FXFQ25AVM FXFQ32AVM FXFQ40AVM FXFQ50AVM FXFQ63AVM FXFQ80AVM FXFQ100AVM FXFQ125AVM FXFQ140AVM
Power consumptionCooling
Heating
Notes: Specifications are based on the following conditions;• Cooling: Indoor temp.: 27°CDB, 19°CWB, Outdoor temp.: 35°CDB, Equivalent piping length: 7.5 m, Level difference: 0 m.• Heating: Indoor temp.: 20°CDB, Outdoor temp.: 7°CDB, 6°CWB, Equivalent piping length: 7.5 m, Level difference: 0 m.• Capacity of indoor unit is only for reference. Actual capacity of indoor unit is based on the total capacity index. (See Engineering Data Book for details.) • Sound level: Anechoic chamber conversion value, measured at a point 1.5 m downward from the unit centre.
During actual operation, these values are normally somewhat higher as a result of ambient conditions.
Designer choice has been given a boost with the increase in number of new types of decoration panels.
Grille and air filter cleaning can be performed without need for a stepladder by lowering the grille.
A dedicated remote controller for the auto grille panel (BRC16A2) is included. Operation is not possible using BRC1E63.
Standard panel
Installable in tight ceiling spaces
Min. of 261 mm* ceiling space when using standard panel.* For FXFQ25-80A models.
Drain pump is equipped as standard accessory with 850 mm lift.
Quick and easy installation
Drain pan and drain water check
The condition of the drain pan and drain water can be checked by removing the suction grille and drain plug.
Easy maintenance
Silver ion anti-bacterial drain pan
Filter has anti-mould and antibacterial treatment
Prevents the growth of slime, bacteria, and mould that cause odours and clogging.* Drain pan should be changed once every two to three years.
Cleanliness
Drain outlet(with rubber plug)
Just open the suction grille!
Note: For inquiries concerning auto grille panel installations, please contact your local dealer or Daikin representative.
850 mm
175 mm
145 146
Ind
oo
r U
nit
s
VRV Indoor Units
Compact Multi Flow Cassette Type
Quiet, compact, and designed for user comfort
FXZQ-A
SpecificationsMODEL FXZQ20AVM FXZQ25AVM FXZQ32AVM FXZQ40AVM FXZQ50AVM
Power supply 1-phase, 220-240 V/220 V, 50/60 Hz
Cooling capacityBtu/h 7,500 9,600 12,300 15,400 19,100
kW 2.2 2.8 3.6 4.5 5.6
Heating capacityBtu/h 8,500 10,900 13,600 17,100 21,500
kW 2.5 3.2 4.0 5.0 6.3
Power consumption
Cooling kW 0.043 0.045 0.059 0.092
Heating kW 0.036 0.038 0.053 0.086
Casing Galvanised steel plate
Airflow rate (H/M/L)m³/min 8.7/7.5/6.5 9.0/8.0/6.5 10.0/8.5/7.0 11.5/9.5/8.0 14.5/12.5/10.0
cfm 307/265/229 318/282/229 353/300/247 406/335/282 512/441/353
Sound level (H/M/L) dB(A) 32.0/29.5/25.5 33.0/30.0/25.5 33.5/30.0/26.0 37.0/32.0/28.0 43.0/40.0/33.0
Sound power (H) dB(A) 49 50 51 54 60
Dimensions (H×W×D) mm 260×575×575 (For depth add 63 mm for electrical box)
Machine weight kg 15.5 16.5 18.5
Piping connections
Liquid (Flare)
mm
6.4
Gas (Flare) 12.7
Drain VP20 (External Dia. 26/Internal Dia. 20)
Notes: Specifications are based on the following conditions;• Cooling: Indoor temp.: 27°CDB, 19°CWB, Outdoor temp.: 35°CDB, Equivalent piping length: 7.5 m, Level difference: 0 m.• Heating: Indoor temp.: 20°CDB, Outdoor temp.: 7°CDB, 6°CWB, Equivalent piping length: 7.5 m, Level difference: 0 m.• Capacity of indoor unit is only for reference. Actual capacity of indoor unit is based on the total capacity index. (See Engineering Data Book for details.)• Sound level: Anechoic chamber conversion value, measured at a point 1.5 m downward from the unit centre.
During actual operation, these values are normally somewhat higher as a result of ambient conditions.
Compact & elegant design• Fully-flat integration in standard architectural ceiling tiles, leaving
only 8 mm
• Remarkable blend of iconic design and engineering excellence with an elegant finish in white
• The newly designed panel integrates fully within one ceiling tile enabling lights, speakers and sprinklers to be installed in the adjoining ceiling tiles.
Dual sensors (Option)
Efficiency & comfort
Cleanliness
• Two optional intelligent sensors improve energy efficiency and comfort.
• An optional presence and floor sensor kit can be fitted to the cassette for draught prevention, energy-saving operation and to provide optimal control of airflow.
Individual airflow direction control *1
• Airflow direction can be individually adjusted for each air discharge outlet to deliver optimal air distribution.
*1. This function can only be set via wired remote controller BRC1E63.
Auto swing (up/down)Possibility to select automatic vertical moving of the air discharge flaps for efficient air and temperature distribution throughout the room.
Ceiling soiling preventionPrevents air from blowing against the ceiling to prevent ceiling stains.
8 mm
Panel (Option)Panel type Grid ceiling panel Decoration panel
Appearance
Model
Colour
BYFQ60CAW BYFQ60B3W1
Dimensions (H×W×D) mm 46×620×620 55×700×700
White (N9.5) White (6.5Y9.5/0.5)
Weight kg 2.8 2.7
147 148
Ind
oo
r U
nit
s
VRV Indoor Units
No individual setting (Auto airflow)
Position Position 0 (Highest point)Position 1Position 2Position 3Position 4 (Lowest point)
Swing
• Power consumption is significantly reduced by specially developed small tube heat exchanger and DC fan motor.
Energy saving
Stylish design
Comfort
Easy maintenance
Flexible installation
5-step & auto airflow control
• Control of airflow rate has been improved from 3-step to 5-step. Auto airflow rate is newly available.
Individual airflow direction control*1
Suitable for high ceilings
• Even in spaces with high ceilings maximum 3.5 m, a comfortable airflow is carried down to the floor level.
FXCQ-A
Thin, lightweight, and easy to install in narrow ceiling spaces
Specifications
Adjuster Pocket
• The flap parts are easy to clean because it is hard to condensate and get dirty.
• Check contamination in drain pan by simply removing suction grille and panel.
• Adjuster pockets mount at four corners of the unit enable to adjust the main unit without removing the panel.
• Drain pump is equipped as standard accessory with 850 mm lift.
020
95
25/32 40 50 63 80 125
Pow
er c
on
sum
pti
on
(W
)
Model class
200
100
300
132 132157
216
278
31 39 4159 63
90
149
Power consumption comparison (Cooling)
MODEL FXCQ20AVM
Power supply
Cooling capacity
CoolingHeating
Heating capacity
Btu/h
kW
Btu/h
kW
kW
m3/min
cfm
dB(A)
mm
kg
mm
kg
mm
Power consumption
Liquid (Flare)Gas (Flare)
Drain
ModelColour
Dimensions (H×W×D)
Weight
Casing
Airflow rate (H/HM/M/ML/L)
Sound level (H/HM/M/ML/L)
Dimensions (H × W × D)
Machine weight
Piping connections
Panel(Option)
1-phase, 220-240 V/220-230 V, 50/60 Hz7,500
2.2
0.031
Galvanised steel plate
VP25 (External Dia. 32/Internal Dia. 25)
Fresh white (6.5Y 9.5/0.5)
10.5/9.5/9/8/7.5371/335/318/282/26532/31/30/29/28
12/11/10.5/9.5/8.5424/388/371/335/30036/35/33/32/31
15/14/13/11.5/10.5530/494/459/406/37137/36/35/33/31
16/15/14/12.5/11.5565/530/494/441/40639/38/37/35/32
26/24/22.5/20.5/18.5918/847/794/724/65342/40/38/36/33
32/29.5/27.5/25/22.51,130/1,041/971/883/79446/44/42/40/38
11.5/10.5/9.5/8.5/8406/371/335/300/282
34/33/31/30/29 34/33/32/31/30305×775×620
19
BYBCQ40CF
55×1,070×70010
6.412.7
9.515.9
FXCQ25AVM
9,6002.8
0.039
FXCQ32AVM
12,3003.6
FXCQ40AVM
15,4004.5
0.041
FXCQ50AVM
19,1005.6
0.059
22
55×1,285×70011
55×1,740×70013
BYBCQ63CF BYBCQ125CF
305×990×620 305×1,445×620
FXCQ63AVM
24,2007.1
0.063
25
FXCQ80AVM
30,7009.0
0.090
33
FXCQ125AVM
47,80014.0
8,500 10,900 13,600 17,100 21,500 27,300 34,100 54,6002.5 3.2 4.0 5.0 6.3 8.0 10.0 16.0
0.1490.028 0.035 0.037 0.056 0.060 0.086 0.146
38
81
Notes: Specifications are based on the following conditions;• Cooling: Indoor temp.: 27°CDB, 19°CWB, Outdoor temp.: 35°CDB, Equivalent piping length: 7.5 m, Level difference: 0 m.• Heating: Indoor temp.: 20°CDB, Outdoor temp.: 7°CDB, 6°CWB, Equivalent piping length: 7.5 m, Level difference: 0 m.• Capacity of indoor unit is only for reference. Actual capacity of indoor unit is based on the total capacity index. (See Engineering Data Book for details.)• Sound level: Anechoic chamber conversion value, measured at a point 1.5 m downward from the unit centre.
During actual operation, these values are normally somewhat higher as a result of ambient conditions.
Conventional model: FXCQ-M New model: FXCQ-A
Silver ion anti-bacterial drain pan
Filter has anti-mould and antibacterial treatment
• Prevents the growth of slime, bacteria, and mould that cause odours and clogging.* Drain pan should be changed once every two to three years.
Cleanliness
Drain socket part
Swing(Up / Down)
Individual settings are possible as stated above.
Individual airflow settings
• Stylish unit blends easily with any interior.
• The flat flaps close entirely when the unit is not operating and there are no air intake grilles visible.
• Depth of all units is 620 mm, ideal for narrow spaces
*1. The function can only be set via BRC1E63.
Position 0(Fixed airflow to highest position)
• Airflow direction can be individually adjusted for each air discharge outlet to deliver optimal air distribution.
Double Flow Cassette Type
149 150
Ind
oo
r U
nit
s
VRV Indoor Units
FXEQ-A
Slim design for flexible installation
Notes: Specifications are based on the following conditions;• Cooling: Indoor temp.: 27°CDB, 19°CWB, Outdoor temp.: 35°CDB, Equivalent piping length: 7.5 m, Level difference: 0 m.• Heating: Indoor temp.: 20°CDB, Outdoor temp.: 7°CDB, 6°CWB, Equivalent piping length: 7.5 m, Level difference: 0 m.• Capacity of indoor unit is only for reference. Actual capacity of indoor unit is based on the total capacity index. (See Engineering Data Book for details.)• Sound level: Anechoic chamber conversion value, measured at a point 1 m in front of the unit and 1 m downward.
• The body features a compact design with a height of just 200 mm and depth 470 mm, making the installation possible in tight ceiling spaces.
• Drain pump is equipped as standard accessory with 850 mm lift.
Specifications
1-phase, 220-240 V, 50 Hz
PVC26 (External Dia. 26/Internal Dia. 20)
19,100 24,2007,500 9,600 12,300 15,400
21,500 27,3008,500 10,900 13,600 17,100
5.6 7.12.2 2.8 3.6 4.5
MODEL
Powerconsumption
Power supply
Heating capacity
Cooling capacity
FXEQ20AV36 FXEQ25AV36 FXEQ32AV36 FXEQ40AV36 FXEQ50AV36 FXEQ63AV36
Airflow rate(H/HM/M/ML/L)
Btu/h
kW
Btu/h
kW 6.3 8.02.5 3.2 4.0 5.0
0.048 0.0670.034 0.046
0.044 0.0630.030 0.042
12.5/11.4/10.4/9.5/8.7 15.0/13.6/12.2/11.0/9.88.0/7.5/7.0/6.3/5.5 9.8/8.8/7.8/7.0/6.2
441/402/367/335/307 530/480/431/388/346282/265/247/222/194 346/311/275/247/219
kW
Dimensions (H×W×D) mm
m3/min
cfm
Cooling
Heating
Piping connections mm
Liquid (Flare)
Gas (Flare)
Drain
Panel (Option)
Model
Colour
Dimensions(H×W×D)
Weight
Galvanised steel plateCasing
Machine weight kg
mm
kg
18 2317
BYEP63AW1BYEP40AW1
Fresh white
80×1,350×55080×950×550
10.08.0
200×1,240×470200×840×470
6.4
12.7
9.5
15.9
0.026 0.027
0.022 0.023
6.0/5.4/4.9/4.4/4.0 6.9/6.4/5.8/5.3/4.8
212/191/173/155/141 244/226/205/187/169
14.0/12.8/11.6/10.7/9.8 16.9/15.3/13.6/12.3/11.08.6/8.0/7.4/6.7/6.0 10.2/9.3/8.4/7.6/6.8
494/452/409/378/346 597/540/480/434/388304/282/261/237/212 360/328/297/268/240
m3/min
cfm
6.0/5.6/5.1/4.7/4.2 7.2/6.7/6.1/5.6/5.0
212/198/180/166/148 254/237/215/198/177
Sound level (H/HM/M/ML/L)
38/37/35/33/31 43/41/39/37/3535/34/33/32/30 38/37/35/33/31
41/39/37/36/34 46/44/42/40/3838/36/34/33/31 41/39/37/35/33dB(A)
Cooling
Heating
Cooling
Heating
30/29/28/27/26 32/31/30/29/28
33/31/29/28/26 35/33/31/30/28
255 mm255 mm
840 mm840 mm470 mm470 mm
Indoor unit 255 mm200 mm
80 mm
• The swinging of horizontal and vertical swing flaps can be adjusted freely with the remote controller, providing 3D airflow to every corner of the room.
• Control of airflow rate can be selected from 5-step control, Automatic and quiet operation mode, which provides comfortable airflow.
• DC motor is adopted both in the fan and drain pump of the indoor unit, not only enhancing the energy saving performance, but also reducing the operating sound and the vibration incurred to the unit.
• While creating a cozy indoor environment, the unit can prevent the suspended ceiling from being soiled by adjusting its louvre angle.
• Maintenance operations can be performed by removing the front panel.
Front view Side view
Vertical swing flaps, swinging to left or right within
Horizontal swing flaps, swinging between
Trave
• The novel smooth panel design makes dust difficult to accumulate, thus causing the cleaning more conveniently.
45° 20° to 70°
Single Flow Cassette Type
Slim design
Comfort
Easy maintenance
151 152
Ind
oo
r U
nit
s
VRV Indoor Units
3D airflow
FXDSQ-A
3D airflow with sensing function for comfort and energy savings
Notes: Specifications are based on the following conditions;•Cooling: Indoor temp.: 27°CDB, 19°CWB, Outdoor temp.: 35°CDB, Equivalent piping length: 5 m, Level difference: 0 m.•Heating: Indoor temp.: 20°CDB, Outdoor temp.: 7°CDB, 6°CWB, Equivalent piping length: 5 m, Level difference: 0 m.•Capacity of indoor unit is only for reference. Actual capacity of indoor unit is based on the total capacity index. (See Engineering Data Book for details.)•Sound level: Anechoic chamber conversion value, measured at a point 1.5 m downward from the unit centre. During actual operation, these values are normally somewhat higher as a result of ambient conditions.
*1: Values are based on external static pressure of 10 Pa.*2: External static pressure is changeable to set by the remote controller. This pressure means “High static pressure - Standard”. (Factory setting is 10 Pa )*3: The values of operation sound level represent those for rear-suction operation. Sound level values for bottom-suction operation can be obtained by adding 5 dB(A).
Daikin advanced sensing technology
Comfort
Installation flexibility
• Horizontal & Vertical direction can be adjusted freely by the remote controller settings as to provide 3D airflow to every corner of the room.
• Can freely select 5 positions and swing mode for each up/ down and left/right direction with remote controller.
• Slim and compact design with a height of only 200 mm and the depth of only 450 mm which is suitable to install in limited spaces.
1-phase, 220-240/220-230 V, 50/60 Hz19,100 24,2007,500 9,600 12,300 15,400
5.6 7.12.2 2.8 3.6 4.521,500 27,3008,500 10,900 13,600 17,100
6.3 8.02.5 3.2 4.0 5.00.032 0.0540.049
15.0/14.0/13.0/11.5/10.5 19.0/17.0/15.0/13.0/11.59.0/8.5/8.0/7.5/7.0 10.0/9.3/8.6/7.9/7.2
31/29/27/26/24 34/32/30/29/27
12.0/11.2/10.5/9.7/9.0Galvanized steel plate
200×900×450 200×1,100×450200×700×450
12.7 (flare) 6.4 (flare)
15.9 (flare) 9.5 (flare)
0.028 0.0290.028 0.0500.0450.024 0.025
8.7/8.1/7.6/7.0/6.5
39/37/35/33/31 39/37/35/33/3031/29/27/26/24
MODEL
Btu/hkW
kW
m3/min
dB(A)mmkg
mm
kg
mmLiquid (Flare)Gas (Flare)Drain
ColourDimensions (H×W×D)
Weight
Pa
Power supply
Cooling capacity
Btu/hkW
Heating capacity
Power consumption *1
CasingAirflow rate (H/HM/M/ML/L)
Sound level (H/HM/M/ML/L)*1 *3
External static pressure
Dimensions (H×W×D)Machine weight
Piping connections
3D Autoswing panel
Specifications
PVC26 (External Dia. 26 / Internal Dia. 20)
Fresh white
10-0 *2
180×922×70 180×1,122×70180×722×70
1.5 2.01.0
20 2317
CoolingHeating
FXDSQ20AVM FXDSQ25AVM FXDSQ32AVM FXDSQ40AVM FXDSQ50AVM FXDSQ63AVM
Sensing sensor stop mode (default: OFF)
• Based on preset user conditions, the system automatically stops operation if the room is unoccupied.*Adjustment is possible for shift time and set temperature by local setting.
Sensing sensor low mode (default: OFF)
Sensing sensor mode
Comfort and energy saving preventing over cooling / heating
• Cooling setpoint: 26°C• Shift temperature: 1.0°C • Shift time: 30 min.• Limit cooling temperature: 30°C
282726
Occupied UnoccupiedAutomatically reverts when people return.
Setp
oin
t (°
C)
Time
26°C26°C 26°C26°C27°C27°C
28°C28°C
After30 min
Afteranother 30 min
Example
• When there are no people in a room, the set temperature is shifted automatically.
24°C near floor
30°C near ceiling
20°C near floor20°C near floor
Room temperature is calculated as 27°C in the area which is in the vicinity of the person.
The wide coverage of the airflow angle creates a comfortable 3D airflow.
5-step & auto airflow control
Dual sensors
Slim design
* Panel dimensions are not included.
Only 450 mm
200 mm
Infrared presence sensorThe presence sensor detects where people are and adjusts the airflow direction accordingly.
Infrared floor sensorThe sensor detects the floor temperature and automatically adjusts operation of the indoor unit to reduce the temperature difference between the ceiling and the floor.
45° 45°
Horizontal flaps
Vertical flaps
• Control of airflow rate can be selected from 5-step and Auto to provide comfortable airflow.
60° 50°
Cooling range of swing
Heating range of swing
Cooling Heating
Absence Presence
3D Airflow Duct with Sensing Type
153 154
Ind
oo
r U
nit
s
VRV Indoor Units
Comfort
FXDQ-PD / ND
Slim design, quietness and ideal for drop-ceilings
Notes: Specifications are based on the following conditions;• Cooling: Indoor temp.: 27°CDB, 19°CWB, Outdoor temp.: 35°CDB, Equivalent piping length: 7.5 m, Level difference: 0 m.• Heating: Indoor temp.: 20°CDB, Outdoor temp.: 7°CDB, 6°CWB, Equivalent piping length: 7.5 m, Level difference: 0 m.• Capacity of indoor unit is only for reference. Actual capacity of indoor unit is based on the total capacity index. (See Engineering Data Book for details.) • Sound level: Anechoic chamber conversion value, measured at a point 1.5 m downward from the unit centre.
During actual operation, these values are normally somewhat higher as a result of ambient conditions. *1: Values are based on the following conditions: FXDQ-PD: external static pressure of 10 Pa; FXDQ-ND: external static pressure of 15 Pa. *2: External static pressure is changeable to set by the remote controller. This pressure means "High static pressure - Standard". (Factory setting is 10 Pa for FXDQ-PD models and 15 Pa for FXDQ-ND models.) *3: The values of operation sound level represent those for rear-suction operation. Sound level values for bottom-suction operation can be obtained by adding 5 dB(A).
• Control of the airflow rate can be selected from 3-step control and Auto. Auto airflow rate control can be selected with wired remote controller.
• Low operation sound level: down to 23 dB(A)
Installation flexibility• Only 200 mm in height, this model can be
installed in rooms with as little as 240 mm in height for the ceiling space between the drop-ceiling and ceiling slab.
• FXDQ-PD and FXDQ-ND models are available in two types to suit different installation conditions.
Installation flexibility
FXDQ-SP
Slim and compact design for easy and flexible installation
Notes: Specifications are based on the following conditions;• Cooling: Indoor temp.: 27°CDB, 19°CWB, Outdoor temp.: 35°CDB, Equivalent piping length: 5.0 m, Level difference: 0 m.• Heating: Indoor temp.: 20°CDB, Outdoor temp.: 7°CDB, 6°CWB, Equivalent piping length: 5.0 m, Level difference: 0 m.• Capacity of indoor unit is only for reference. Actual capacity of indoor unit is based on the total capacity index. (See Engineering Data Book for details.)• Sound level: Anechoic chamber conversion value, measured at a point 1.5 m downward from the unit centre.
During actual operation, these values are normally somewhat higher as a result of ambient conditions.*1: Values are based on the following conditions: FXDQ20-32SP: external static pressure of 10 Pa; FXDQ40-63SP: external static pressure of 20 Pa.*2: External static pressure is changeable to set by the remote controller. This pressure means “High static pressure - Standard”.
(Factory setting is 10 Pa for FXDQ20-32SP models and 20 Pa for FXDQ40-63SP models.)*3: The values of operation sound level represent those for rear-suction operation. Sound level values for bottom-suction operation can be obtained by adding 5 dB(A).
• Slim and compact design with a height of only 200 mm and the depth of only 450 mm which is suitable to install in limited spaces.
SpecificationsMODEL
1-phase, 220-240 V, 50 Hz
Galvanised steel plate
VP20 (External Dia. 26/Internal Dia. 20)
Gas (Flare)
Drain
Liquid (Flare)
FXDQ20SPV1 FXDQ25SPV1 FXDQ32SPV1 FXDQ40SPV1 FXDQ50SPV1 FXDQ63SPV1Power supply
Casing
Cooling capacity
Heating capacity
Airflow rate (HH/H/L)
External static pressure
Machine weight
Dimensions (H×W×D)
Piping connections
Power consumption 1
Sound level (HH/H/L) 1 3
Btu/h
kW
Btu/h
kW
kW
kW
Heating
Cooling
m3/min
dB(A)
Pa
cfm
kg
mm
mm
307/268/229
8.7/7.6/6.5
7,500
2.2
0.056
15,400
4.5
0.152
19,100
5.6
318/282/247
200×700×450
17
9.0/8.0/7.0
30-10
9,600
2.8
0.059
530/459/371
35/33/31
200×900×450
20
15.0/13.0/10.5
50-20353/318/282
34/32/30
10.0/9.0/8.0
12,300
3.6
0.062
6.4
12.7
33/31/29
706/565/441
37/35/33
200×1,100×450
23
20.0/16.0/12.5
24,200
7.1
8,500
2.5
17,100
5.0
21,500
6.3
10,900
3.2
13,600
4.0
27,300
8.0
0.1960.072 0.1800.075 0.078
0.168
9.5
15.9
40-20
Specifications
MODELFXDQ20PDVE FXDQ25PDVE FXDQ32PDVE FXDQ40NDVE FXDQ50NDVE FXDQ63NDVE
FXDQ20PDVET FXDQ25PDVET FXDQ32PDVET FXDQ40NDVET FXDQ50NDVET FXDQ63NDVET
Power supply
with drain pump
without drain pump
Casing
Cooling capacity
Power consumption
Power consumption
Airflow rate (HH/H/L)
Sound level (HH/H/L) 1 3
(FXDQ-PD/NDVET) 1
(FXDQ-PD/NDVE) 1
External static pressure
Machine weight
Dimensions (H×W×D)
Piping connections
Gas (Flare)
Drain
Liquid (Flare)
Btu/h
kW
Heating capacityBtu/h
kW
kW
kW
m3/min
dB(A)
Pa
kg
mm
mm
cfm
1-phase, 220-240 V/220 V, 50/60 Hz
7,500 9,600 12,300 15,400 19,100 24,200
2.2
8,500
2.5
2.8
10,900
3.2
3.6
13,600
4.0
4.5
17,100
5.0
5.6
21,500
6.3
7.1
27,300
8.00.086 0.089 0.160 0.165 0.181
0.067 0.070 0.147 0.152 0.168
0.067 0.070 0.147 0.152 0.168
Galvanised steel plate8.0/7.2/6.4 10.5/9.5/8.5 12.5/11.0/10.0 16.5/14.5/13.0
28/26/2428/26/23 30/28/26 33/30/27 33/31/2930-10 44-15
23 27 28 31
6.4 9.5
12.7 15.9
VP20 (External Dia. 26/Internal Dia. 20)
200×700×620 200×1,100×620200×900×620
282/254/226 371/335/300 441/388/353 583/512/459
Cooling
0.067 0.070 0.147 0.152 0.168
Cooling
Heating
Cooling
Heating
Only 450 mm
700 mm**For FXDQ20-32SP models
FXDQ-PD/NDVE: with a drain pump (750 mm lift) as a standard accessoryFXDQ-PD/NDVET: without a drain pump
*1,100 mm in width for the FXDQ63ND model.
FXDQ40/50ND
200 mm200 mm
900 mm
200 mm
Only 700 mm
FXDQ20-32PD
Great forhotel use!
Great for residential use
Slim Duct (Standard) Type Slim Duct (Compact) Type
Side view Top view
240 mmandabove
Ceiling
700 mm
600
mm
200 mm 450 mm
• Drain pump is equipped as standard accessory with 750 mm lift.
2 2
2 2 2
155 156
Ind
oo
r U
nit
s
VRV Indoor Units
Air suction
JoistAir conditioner
ceiling
Middle Static Pressure Duct Type
Installation flexibility
Slim design
• With a height of only 245 mm, installation is possibleeven in buildings with narrow ceiling spaces.
Design flexibility
Adjustable external static pressure
• Using a DC fan motor, the external static pressure can be controlled within a range of 30 Pa* to 150 Pa.
Easy installation
“Airflow rate auto adjustment function” at field setting (local setting by remote controller)
Comfort• Control of the airflow rate can be selected from 3-step control. Auto airflow rate control can be
selected with wired remote controller.
• Lower sound level: down to 28 dB(A)
Standard DC drain pump
• DC drain pump is equipped as standard accessory with 850 mm lift.
Bottom suction possible
FXSQ-PA
Middle static pressure and slim design allow flexible installations
SpecificationsMODEL FXSQ20PAVE FXSQ25PAVE FXSQ32PAVE FXSQ40PAVE FXSQ50PAVE
FXSQ63PAVE FXSQ80PAVE FXSQ100PAVE FXSQ125PAVE FXSQ140PAVE
Power supply
Btu/h
kW
kW
m3/min
Pa
cfm
mm
mm
kg
dB(A)
Cooling capacity
Btu/h
kWHeating capacity
Power consumption
Casing
Airflow rate (H/M/L)
External static pressure
Sound level (H/M/L)
Dimensions (H×W×D)
Machine weight
Machine weight
Piping connections
Liquid (Flare)
Gas (Flare)
Drain
MODEL
Power supply
Btu/h
kW
kW
m3/min
Pa
cfm
mm
mm
kg
dB(A)
Cooling capacity
Btu/h
kWHeating capacity
Power consumption
Casing
Airflow rate (H/M/L)
External static pressure
Sound level (H/M/L)
Dimensions (H×W×D)
Piping connections
Liquid (Flare)
Gas (Flare)
Drain
1-phase, 220-240 V/220 V, 50/60 Hz
1-phase, 220-240 V/220 V, 50/60 Hz
19,100 7,500 9,600 12,300 15,400 5.62.2
8,5002.5
2.810,900
3.2
3.613,600
4.0
4.521,50017,100
6.35.00.075*10.066*1 0.101*10.058*1
kW 0.070*10.061*1 0.096*10.053*1
Galvanised steel plate
Galvanised steel plate
17/14.5/11.59/7.5/6.5 9.5/8/7 15/12.5/10.5
34/32/30
6.4
12.7
36/33/30 34/32/2933/30/28
335/282/247 530/441/371 600/512/406318/265/230
741/618/512 812/688/565 1,130/953/794 1,306/1,112/918 1,377/1,183/988
30-150 (50) *2 50-150 (50) *2
27 35
35
25245×700×800 245×1,000×800
245×1,000×800
245×550×800
VP25 (External Dia. 32/Internal Dia. 25)
VP25 (External Dia. 32/Internal Dia. 25)
24,200 30,700 38,200 47,800 54,600
7.1 9.027,300 34,100
8.0 10.0
11.2
12.5
14.042,700 54,600
16.0
16.061,400
18.00.106*1 0.126*1 0.151*1 0.206*1 0.222*1
kW 0.101*1 0.121*1 0.146*1 0.201*1 0.217*1
21/17.5/14.5 23/19.5/16 32/27/22.5 37/31.5/26 39/33.5/28
37.5/34/3036/32/29 39/35/32 42/38.5/35 43/40/36
50-140 (50) *250-150 (50) *2
245×1,400×800 245×1,550×80037 46 47 52
9.515.9
Cooling
Heating
Cooling
Heating
245 mm
Adjustable external static pressure
* 30 Pa–150 Pa for FXSQ20-40PAVE50 Pa–150 Pa for FXSQ50-125PAVE50 Pa–140 Pa for FXSQ140PAVE
Easy maintenance• Inspection and cleaning is facilitated by separating the drain pipe
and inspection opening and by the drain pan maintenance check hole.
Drain pan maintenance check hole
Separate drain pipe and inspection opening
Rated airflow
Exte
rnal
sta
tic
pre
ssu
re (
ESP)
Airflow
*This function can only be set via wired remote controller.
Silver ion anti-bacterial drain pan
Filter has anti-mould and antibacterial treatment
• Prevents the growth of slime, bacteria, and mould that cause odours and clogging.* Drain pan should be changed once every two to three years.
Cleanliness
Notes: Specifications are based on the following conditions;• Cooling: Indoor temp.: 27°CDB, 19°CWB,
Outdoor temp.: 35°CDB, Equivalent piping length: 7.5 m, Level difference: 0 m.
• Heating: Indoor temp.: 20°CDB, Outdoor temp.: 7°CDB, 6°CWB, Equivalent piping length: 7.5 m, Level difference: 0 m.
• Capacity of indoor unit is only for reference. Actual capacity of indoor unit is based on the total capacity index. (See Engineering Data Book for details.)
• Sound level: Anechoic chamber conversion value, measured at a point 1.5 m downward from the unit centre.During actual operation, these values are normally somewhat higher as a result of ambient conditions.
*1: Power consumption values are based on conditions of rated external static pressure.
*2: External static pressure can be modified using a remote controller that offers thirteen (FXSQ20-40PA), eleven (FXSQ50-125PA) or ten (FXSQ140PA) levels of control. These values indicate the lowest and highest possible static pressures. The rated static pressure is 50 Pa.
<Mechanism>1. During field setting, power input of DC fan is detected. 2. External static pressure is estimated from power input of DC fan because PCB
of FXSQ-PA has table of external static pressure vs. power input of DC fan.3. Actual duct resistance is calculated according to 1 and 2.4. Fan speed is automatically adjusted to produce rated airflow.
• Bottom suction is possible which facilitates installation and maintenance. Wiring connections and maintenance of control box can be done from under the unit with an optional shield plate for side plate.
30Pa* 150Pa
Duct resistance at designing system
Actual duct resistance
rpm 1
rpm 2
rpm 8
rpm 7
Notes: ”Airflow rate auto adjustment function” can be adjusted within ±10% of rated airflow. (Refer to Engineering Data Book for details)
”Airflow rate auto adjustment function” should be used at field setting only.
Systemoperation
Installation
Installation
Design
Design
Field setting without “airflow rate auto adjustment function”
Field setting with “airflow rate auto adjustment function” by remote controller
Various adjustments are required (Due to excess or deficiency of airflow) e.g. Duct re-construction, Motor replacement, Damper replacement, etc.
InnovatingFunction!
157 158
Ind
oo
r U
nit
s
VRV Indoor Units
mm
Middle-High Static Pressure Duct Type
Design flexibility
FXMQ-PA
Middle and high static pressure allows for flexible duct design
Notes: Specifications are based on the following conditions;• Cooling: Indoor temp.: 27°CDB, 19°CWB, Outdoor temp.: 35°CDB, Equivalent piping length: 7.5 m, Level difference: 0 m.• Heating: Indoor temp.: 20°CDB, Outdoor temp.: 7°CDB, 6°CWB, Equivalent piping length: 7.5 m, Level difference: 0 m.• Capacity of indoor unit is only for reference. Actual capacity of indoor unit is based on the total capacity index. (See Engineering Data Book for details.)• Sound level: Anechoic chamber conversion value, measured at a point 1.5 m downward from the unit centre. During actual operation,
these values are normally somewhat higher as a result of ambient conditions.*1: Power consumption values are based on conditions of rated external static pressure.*2: External static pressure can be modified using a remote controller that offers seven (FXMQ20-32PA), thirteen (FXMQ40PA), fourteen (FXMQ50-125PA) or
ten (FXMQ140PA) levels of control. These values indicate the lowest and highest possible static pressures. The rated static pressure is 50 Pa for FXMQ20-32PA and 100 Pa for FXMQ40-140PA.
SpecificationsMODEL FXMQ20PAVE FXMQ25PAVE FXMQ32PAVE FXMQ40PAVE FXMQ50PAVE
Power supply 1-phase, 220-240 V/220 V, 50/60 Hz
Cooling capacity
Heating capacity
Btu/h
kW
Btu/h
kW
kW
kW
7,500 9,600 12,300 15,400 19,100
2.2 2.8
8,500 10,900
2.5 3.2
3.6 4.5
13,600 17,100
4.0 5.0
5.6
21,500
6.3
Power consumption0.056 *1 0.060 *1 0.151 *1 0.128 *1
0.044 *1 0.048 *1 0.139 *1 0.116 *1
Galvanised steel plateCasing
Airflow rate (HH/H/L)m3/min 9.5/8/79/7.5/6.5 16/13/11 18/16.5/15
318/265/230cfm 635/582/530565/459/388335/282/247
External static pressure Pa 30-100 (50) *2 30-160 (100) *2 50-200 (100) *2
dB(A)
kg
mm
Sound level (HH/H/L)
Machine weight
Dimensions (H×W×D)
34/32/3033/31/29 39/37/35 41/39/37
300x700x700 300x1,000x700300x550x700
27 3525
Piping connections
Gas (Flare)
Drain
Liquid (Flare)
kWPower consumption
Casing
Airflow rate (HH/H/L)m3/min
cfm
External static pressure Pa
dB(A)
kg
mm
mm
Sound level (HH/H/L)
Machine weight
Dimensions (H×W×D)
Piping connections
Gas (Flare)
Drain
Liquid (Flare)
6.4
12.7
VP25 (External Dia. 32/Internal Dia. 25)
MODEL FXMQ63PAVE FXMQ80PAVE FXMQ100PAVE FXMQ125PAVE FXMQ140PAVE1-phase, 220-240 V/220 V, 50/60 HzPower supply
Cooling capacity
Heating capacity
Btu/h
kW
Btu/h
kW
24,200 30,700 38,200 47,800 54,600
7.1
27,300
8.0
9.0
34,100
10.0
11.2
42,70012.5
14.0
54,600
16.0
16.0
61,40018.0
0.138 *1 0.185 *1 0.215 *1 0.284 *1 0.405 *1
kW 0.127 *1 0.173 *1 0.203 *1 0.272 *1 0.380 *1
Galvanised steel plate
19.5/17.5/16 25/22.5/20 32/27/23 39/33/28 46/39/32
883/794/706 1,130/953/812 1,377/1,165/988 1,624/1,377/1,130688/618/56550-140 (100) *2 50-200 (100) *2
42/40/38 43/41/39 44/42/40 46/45/43
300×1,400×700300×1,000×700
4535 46
9.5
15.9
VP25 (External Dia. 32/Internal Dia. 25)
Cooling
Heating
Cooling
Heating
Using a DC fan motor, the external static pressure canbe controlled within a range of 30 Pa* to 200 Pa*.
Easy maintenanceInspection and cleaning is facilitated by separating the drain pipe and inspection opening and by the drain pan maintenance check hole.
• All models are only 300 mm in height and the weight of the FXMQ40-140PA has been reduced.• Drain pump is equipped as standard accessory with 700 mm lift.
Comfort• Control of the airflow rate can be selected from 3-step control and Auto. Auto airflow rate control can
be selected with wired remote controller.
• Low operation sound level: down to 29 dB(A)
Energy saving• DC fan motor is used to realise energy-saving operation.
Adjustable external static pressure
*30 Pa – 100 Pa for FXMQ20PA-32PA*30 Pa – 160 Pa for FXMQ40PA*50 Pa – 200 Pa for FXMQ50PA-125PA*50 Pa – 140 Pa for FXMQ140PA
30Pa* 200Pa
Easy installation“Airflow rate auto adjustment function” at field setting (local setting by remote controller)
Rated airflow
Exte
rnal
sta
tic
pre
ssu
re (
ESP)
Airflow
*This function is not available with FXMQ140PAVE.*This function can only be set via wired remote controller.
<Mechanism>1. During field setting, power input of DC fan is detected. 2. External static pressure is estimated from power input of DC fan because PCB of
FXMQ-PA has table of external static pressure vs. power input of DC fan.3. Actual duct resistance is calculated according to 1 and 2.4. Fan speed is automatically adjusted to produce rated airflow.
Duct resistance at designing system
Actual duct resistance
rpm 1
rpm 2
rpm 8
rpm 7 Systemoperation
Installation
Installation
Design
Design
Field setting without “airflow rate auto adjustment function”
Field setting with “airflow rate auto adjustment function” by remote controller
Various adjustments are required (Due to excess or deficiency of airflow) e.g. Duct re-construction, Motor replacement, Damper replacement, etc.
InnovatingFunction!
Drain pan maintenance check hole
Separate drain pipe and inspection opening
Silver ion anti-bacterial drain pan
Filter has anti-mould and antibacterial treatment
Prevents the growth of slime, bacteria, and mould that cause odours and clogging.*Drain pan should be changed once every two to three years.
Cleanliness
Notes: ”Airflow rate auto adjustment function” can be adjusted within ±10% of rated airflow. (Refer to Engineering Data Book for details)”Airflow rate auto adjustment function” should be used at field setting only.
159 160
Ind
oo
r U
nit
s
VRV Indoor Units
High Static Pressure Duct TypeEasy maintenance
Adjustable external static pressure
• Using a DC fan motor, the external static pressure can be controlled within a range of 50 Pa to 250 Pa.
Built-in pre-filter slot
• To cater for easy installation of filter at site, a filter rail is available at the return flange.
FXMQ-P
High static pressure allows for flexible duct design.• Inspection and cleaning is facilitated by separating
the inspection opening and the drain pan maintenance check hole.
• Heat exchanger, drain pan and fan deck can be easilyaccessed and removed from bottom for maintenance.
Notes: Specifications are based on the following conditions;• Cooling: Indoor temp.: 27°CDB, 19°CWB, Outdoor temp.: 35°CDB, Equivalent piping length: 7.5 m, Level difference: 0 m.• Heating: Indoor temp.: 20°CDB, Outdoor temp.: 7°CDB, 6°CDB, Equivalent piping length: 7.5 m, Level difference: 0 m• Capacity of indoor unit is only for reference. Actual capacity of indoor unit is based on the total capacity index. (See Engineering Data Book for details.)• Sound level: Anechoic chamber conversion value, measured at a point 1.5 m downward from the unit centre.
During actual operation, these values are normally somewhat higher as a result of ambient conditions.*1: Power consumption values are based on conditions of rated external static pressure.*2: External static pressure can be modified using a remote controller that offers fifteen levels of control.
These values indicate the lowest and highest possible static pressures. The standard static pressure is 150 Pa.
Design flexibility
Easy installation
Adjustable external static pressure
50Pa 250Pa
SpecificationsMODEL FXMQ200PVM FXMQ250PVM
1-phase, 220-240 V/220-230 V, 50/60 Hz
76,400 95,500
22.4 28.0
0.55 *1 0.67 *1
Galvanised steel plate
74/61/50 84/71/58
2,612/2,153/1,765 2,965/2,506/2,047
50-250 (150) *2 50-250 (150) *2
42/38/35 44/40/37
470×1,490×1,100 470×1,490×1,100
95 105
BSP1”
Power supply
Cooling capacityBtu/h
kW
85,300 107,500
25.0 31.5Heating capacity
Btu/h
kW
kW
m3/min
cfm
dB(A)
mm
kg
mm
Power consumption
Casing
Liquid (Flare)
Gas (Flange)
Drain
Cooling
Heating
Airflow rate (HH/H/L)
Sound level (HH/H/L)
PaExternal static pressure
Dimensions (H × W × D)
Machine weight
Piping connections
9.5
22.219.1
0.54 *1 0.65 *1
Drain pan maintenance check hole
Separate inspection opening
“Airflow rate auto adjustment function” at field setting (local setting by remote controller)
Rated airflow
Exte
rnal
sta
tic
pre
ssu
re (
ESP)
Airflow
*This function can only be set via wired remote controller.
<Mechanism>1. During field setting, power input of DC fan is detected. 2. External static pressure is estimated from power input of DC fan because PCB
of FXMQ-P has table of external static pressure vs. power input of DC fan.3. Actual duct resistance is calculated according to 1 and 2.4. Fan speed is automatically adjusted to produce rated airflow.
Duct resistance at designing system
Actual duct resistance
rpm 1
rpm 2
rpm 8
rpm 7 Systemoperation
Installation
Installation
Design
Design
Field setting without “airflow rate auto adjustment function”
Field setting with “airflow rate auto adjustment function” by remote controller
Various adjustments are required (Due to excess or deficiency of airflow) e.g. Duct re-construction, Motor replacement, Damper replacement, etc.
InnovatingFunction!
Notes: ”Airflow rate auto adjustment function” can be adjusted within ±10% of rated airflow. (Refer to Engineering Data Book for details)”Airflow rate auto adjustment function” should be used at field setting only.
161 162
Ind
oo
r U
nit
s
VRV Indoor Units
4-way flow 3-way flow L-shaped 2-way flow
4-way Flow Ceiling Suspended Type Ceiling Suspended TypeFXUQ-A
Slim and stylish design, optimum air distribution, installation without ceiling cavity
Notes: Specifications are based on the following conditions;• Cooling: Indoor temp.: 27°CDB, 19°CWB, Outdoor temp.: 35°CDB, Equivalent piping length: 7.5 m, Level difference: 0 m.• Heating: Indoor temp.: 20°CDB, Outdoor temp.: 7°CDB, 6°CWB, Equivalent piping length: 7.5 m, Level difference: 0 m.• Capacity of indoor unit is only for reference. Actual capacity of indoor unit is based on the total capacity index. (See Engineering Data Book for details.) • Sound level: Anechoic chamber conversion value, measured at a point 1 m in front of the unit and 1 m downward.
During actual operation, these values are normally somewhat higher as a result of ambient conditions.
• Unit body and suction panel have round shapes that form a slim design, that fits various locations such as the ceilings without cavity.
• Flaps close automatically when the unit stops, which gives a simple appearance.
• All models have a unified slim height of 198 mm that gives a similar impression even when models with different capacities are installed in the same area.
ComfortSlim and stylish design
• Airflow direction adjustment can be individually adjusted for each air discharge outlet to deliver optimal air distribution. 5 directions of airflow and auto-swing can be selected with wired remote controller BRC1E63.
• Control of the airflow rate can be selected from 3-step control. Auto airflow rate control can be selected with wired remote controller.
Comfort
• Drain pump is equipped as a standard accessory with 600 mm lift.
• Depending on installation site requirements or room conditions, 2-way, 3-way and 4-way discharge patterns are available.
Flexible installation
FXHQ-MA / A
Slim body with quiet and wide airflow
FXHQ32MAVE FXHQ63MAVE FXHQ100MAVE FXHQ125AVM FXHQ140AVM
6.4
12.7
12,300
3.6
13,600
4.0
12/-/10
36/-/31
424/-/353
195×960×680
24
0.111
1-phase, 220-240 V/220 V, 50/60 Hz
White (10Y9/0.5)
24,200
7.1
27,300
8.0
0.115
17.5/-/14
39/-/34
618/-/494
195×1,160×680
28
9.5
15.9
VP20 (External Dia. 26/Internal Dia. 20)
38,200
11.2
48,000
14.1
42,700
12.5
54,600
16.0
0.135
0.111 0.115 0.135
25/-/19.5
45/-/37
883/-/688
195×1,400×680
33
Specifications
1-phase, 220-240 V/220-230 V, 50/60 Hz
52,900
15.5
58,000
17.0
0.168
0.168
0.181
0.181
Sheet Metal / White
34/26/20
1,200/918/706
46/41/37
36/27/20
1,271/953/706
48/42/37
235×1,590×690
41
MODEL
Power supply
Cooling capacityBtu/h
kW
Heating capacityBtu/h
kW
kW
m3/min
cfm
dB(A)
mm
kg
mm
Power consumption
Casing
Liquid (Flare)
Gas (Flange)
Drain
Cooling
Heating
Airflow rate (H/M/L)
Sound level (H/M/L)
Dimensions (H × W × D)
Machine weight
Piping connections
FXHQ32 / 63 / 100MA FXHQ125 / 140A
• Auto swing (up and down) and louvers (left and right by hand) bring comfort to the room.
• Louver manually adjusts for straight or wide angle airflow.
Installation flexibility• Flexible installation
The unit fits more snugly into tight spaces.
• Drain pump kit (option) can be easily incorporated.Drain pipe connection can be done inside the unit. Refrigerant and drain pipe outlets are at the same opening.
• All wiring and internal servicing can be done from under the unit.
• The technology of the DC fan motor, wide sirocco fan, and large heat exchanger combine for greater airflow and quiet operation.
• Sophisticated design: Flap neatly closes when not in use.
• Suitable for high ceilings: maximum 4.3 m
• Control of airflow rate has been improved from 2-step to 3-step.
• Drain pump kit (option) includes a silver ion antibacterial agent that assists in preventing the growth of slime, bacteria, and mould that cause smells and clogging.
• The rear side removable frame allows ease of access for piping work.
New 125 / 140 models provide greater capacity for large spaces
30 or more 30 or moreRequired installation space (mm)
* Water used in the test-run can be drained from the air discharge opening rather than from the side as was formerly the case.
SpecificationsMODEL FXUQ71AVEB FXUQ100AVEB
Power supply
Casing
Cooling capacity
Heating capacity
Btu/h
kW
Btu/h
kW
kW
kWPower consumption
cfmAirflow rate (H/M/L)
m3/min
Sound level (H/M/L) dB(A)
Machine weight kg
Dimensions (H×W×D) mm
Piping connections
mmGas (Flare)
Drain
Liquid (Flare)
1-phase, 220-240 V/220-230 V, 50/60 Hz
27,300
8.0
0.090
22.5/19.5/16
794/688/565
40/38/36
26
9.5
15.9
38,200
11.2
30,700
9.0
42,700
12.50.200
0.073 0.179
31/26/21
Fresh white
1,094/918/741
47/44/40
27
198×950×950
VP20 (External Dia. 26/Internal Dia. 20)
Cooling
Heating
Silver ion anti-bacterial drain pan
Filter has anti-mould and antibacterial treatment
• Prevents the growth of slime, bacteria, and mould that cause odours and clogging.* Drain pan should be changed once every two to three years.
Cleanliness
Drain pump kit (built inside the unit)
600 mm
Easier piping work
Notes:Specifications are based on the following conditions;• Cooling: Indoor temp.: 27°CDB, 19°CWB,
Outdoor temp.: 35°CDB, Equivalent piping length: 7.5 m, Level difference: 0 m.
• Heating: Indoor temp.: 20°CDB, Outdoor temp.: 7°CDB, 6°CWB, Equivalent piping length: 7.5 m, Level difference: 0 m.
• Capacity of indoor unit is only for reference. Actual capacity of indoor unit is based on the total capacity index. (See Engineering Data Book for details.)
• Sound level: Anechoic chamber conversion value, measured at a point 1 m in front of the unit and 1 m downward. During actual operation, these values are normally somewhat higher as a result of ambient conditions
163 164
Ind
oo
r U
nit
s
VRV Indoor Units
Wall Mounted Type
Higher airflow
Lower sound level
• An invisible air intake at the top of the unit
• Vertical auto-swing enables efficient air and temperature distribution throughout the room.
• The louver closes automatically when the unit stops.
• Enhanced comfort is achieved.
• 5 step discharge angles can be set by remote controller.
• Discharge angle is automatically set at the same angle as previous operation when restart.
Whisper quiet in operation, with sound levels as low as 28.5 dB(A)**Sound level for FXAQ20-32A
An ideal solution for a wide range of commercial spaces, including individual office spaces.
FXAQ-A
Stylish flat panel design harmonised with your interior décor
Notes: Specifications are based on the following conditions;• Cooling: Indoor temp.: 27°CDB, 19°CWB, Outdoor temp.: 35°CDB, Equivalent piping length: 7.5 m, Level difference: 0 m.• Heating: Indoor temp.: 20°CDB, Outdoor temp.: 7°CDB, 6°CWB, Equivalent piping length: 7.5 m, Level difference: 0 m.• Capacity of indoor unit is only for reference. Actual capacity of indoor unit is based on the total capacity index. (See Engineering Data Book for details.)• Sound level: Anechoic chamber conversion value, measured at a point 1 m in front of the unit and 1 m downward.
During actual operation, these values are normally somewhat higher as a result of ambient conditions.
External EV kit (for heating operation) (Option)
Specifications
1-phase, 220-240 V/220-230 V, 50/60 Hz
FXAQ20AVM
Resin / White N9.5
FXAQ25AVM FXAQ32AVM FXAQ40AVM FXAQ50AVM FXAQ63AVMMODEL
Power supply
Cooling capacityBtu/h
kW
Heating capacityBtu/h
kW
kW
m3/min
cfm
dB(A)
mm
kg
mm
Power consumption
Casing
Liquid (Flare)
Gas (Flange)
Drain
Cooling
Heating
Cooling
Heating
Airflow rate (H/L)
Sound level (H/L)
Dimensions (H × W × D)
Machine weight
Piping connections
7,500
2.2
0.040
9.1/7.0
34.0/28.5
9,600
2.8
0.040
12,300
3.6
0.050
332/247321/247
9.4/7.0
36.0/28.5
290×795×266
12
346/247
9.8/7.0
38.5/28.5
6.4
VP13 (External Dia. 18/Internal Dia. 15)
12.7
15,400
4.5
0.050
431/342
12.2/9.7
38.0/33.5
19,100
5.6
0.070
530/424
15.0/12.0
42.0/35.5
290×1,050×269
15
24,200
8,500 10,900 13,600 17,100 21,500 27,300
2.5 3.2 4.0 5.0 6.3 8.0
7.1
0.110
0.040 0.040 0.040 0.050 0.060 0.100
671/494
19.0/14.0
47.0/38.5
33.0/28.5 35.0/28.5 37.5/28.5 37.0/33.5 41.0/35.5 46.5/38.5
9.5
15.9
Drain pump kit
1,000mm
Height of drain-up
Indoor unit
This product, which is concealed in ceilings or corridors for quieter heating operation, is used to connect indoor units in places where quiet environment is required such as residential living rooms.
* This option is only effective for reducing operation sound during heating operation. Therefore it is ineffective when connected to cooling only outdoor units.
Gas pipe
Liquid pipe
Max 4 m
External EV kit(for heating operation)BEV15/30D
5 m - 10 m
An invisible air intake at the top of the unit
Comfort
Stylish design and cleanliness• Stylish flat panel design creates a graceful harmony that enhances any interior space.
• Flat panel can be cleaned with only the single pass of a cloth across their smooth surface.Flat panel can also be easily removed and washed for more thorough cleaning.
• Drain pan and air filter can be kept clean by mould-proof polystyrene.
Flexible installation• Drain pipe can be fitted to from either left or right sides.
• Drain pump kit is available as optional accessory, which lifts the drain 1,000 mm from the bottom of the unit.
165 166
Ind
oo
r U
nit
s
VRV Indoor Units
Floor Standing TypeFXLQ-MA
Suitable for perimeter zone air conditioning
Notes: Specifications are based on the following conditions;• Cooling: Indoor temp.: 27°CDB, 19°CWB, Outdoor temp.: 35°CDB, Equivalent piping length: 7.5 m, Level difference: 0 m.• Heating: Indoor temp.: 20°CDB, Outdoor temp.: 7°CDB, 6°CWB, Equivalent piping length: 7.5 m, Level difference: 0 m.• Capacity of indoor unit is only for reference. Actual capacity of indoor unit is based on the total capacity index. (See Engineering Data Book for details.) • Sound level: Anechoic chamber conversion value, measured at a point 1.5 m in front of the unit at a height of 1.5 m.
During actual operation, these values are normally somewhat higher as a result of ambient conditions.
Notes: Specifications are based on the following conditions;• Cooling: Indoor temp.: 27°CDB, 19°CWB, Outdoor temp.: 35°CDB, Equivalent piping length: 7.5 m, Level difference: 0 m.• Heating: Indoor temp.: 20°CDB, Outdoor temp.: 7°CDB, 6°CWB, Equivalent piping length: 7.5 m, Level difference: 0 m.• Capacity of indoor unit is only for reference. Actual capacity of indoor unit is based on the total capacity index. (See Engineering Data Book for details.) • Sound level: Anechoic chamber conversion value, measured at a point 1.5 m in front of the unit at a height of 1.5 m.
During actual operation, these values are normally somewhat higher as a result of ambient conditions.
• Floor Standing types can be hung on the wall for easier cleaning. Running the piping from the back allows the unit to be hung on walls. Cleaning under the unit, where dust tends to accumulate, is considerably easier.
• The adoption of a fibre-less discharge grille featuring an original design to prevent condensation also helps prevent staining and makes cleaning easier.
• A long-life filter (maintenance free up to one year*) is equipped as standard accessory.*8 hr/day, 25 day/month. For dust concentration of 0.15 mg/m3
FXNQ-MA
Designed to be concealed in the perimeter skirting-wall
• The unit is concealed in skirting-wall of perimeter, that enables to create high class interior design.
• The connecting port faces downward, greatly facilitating on-site piping work.
• A long-life filter (maintenance free up to one year*) is equipped as standard accessory.*8 hr/day, 25 day/month. For dust concentration of 0.15 mg/m3
MODEL
Specifications
Power supply
Cooling capacity
Heating capacity
Btu/h
kW
Btu/h
kW
kW
Power consumption
220 V
240 V
m3/min
Casing
Airflow rate (H/L)
Sound level (H/L)
Machine weight
Dimensions (H × W × D)
Piping connections
kg
mm
mmGas (Flare)
Drain
Liquid (Flare)
dB(A)
cfm
FXLQ20MAVE
7,500
2.2
FXLQ25MAVE
9,600
2.8
8,500
2.5
10,900
3.2
0.049
7/6
35/32
37/34
25
600×1,000×222
247/212
FXLQ32MAVE
12,300
3.6
8/6
282/212
6.4
12.7
FXLQ40MAVE
15,400
4.5
0.090
11/8.5
38/33
40/35
30
600×1,140×222
388/300
FXLQ50MAVE
19,100
5.6
14/11
39/34
41/36
494/388
FXLQ63MAVE
24,200
7.1
13,600
4.0
17,100
5.0
21,500
6.3
27,300
8.0
0.110
kW 0.049 0.090 0.110
16/12
40/35
42/37
36
600×1,420×222
565/424
9.5
15.9
1-phase, 220-240 V/220 V, 50/60 Hz
Ivory white (5Y7.5/1)
21O.D.
Cooling
Heating
SpecificationsMODEL FXNQ20MAVE FXNQ25MAVE FXNQ32MAVE FXNQ40MAVE FXNQ50MAVE FXNQ63MAVE
Power supply
Cooling capacity
Heating capacity
Btu/h
kW
Btu/h
kW
kW
kW
Cooling
Heating
Power consumption
220 V
240 V
m3/min
Casing
Airflow rate (H/L)
Sound level (H/L)
Machine weight
Dimensions (H × W × D)
Piping connections
kg
mm
mmGas (Flare)
Drain
Liquid (Flare)
dB(A)
cfm
7,500
2.2
8,500
2.5
7/6
19.0
247/212
9,600
2.8
10,900
3.2
0.049
0.049
7/6
35/32
37/34
610×930×220
247/212
12,300
3.6
13,600
4.0
8/6
610×1,070×220
282/212
6.4
12.7
15,400
4.5
17,100
5.0
0.090
0.090
11/8.5
38/33
40/35
23.0
388/300
19,100
5.6
21,500
6.3
14/11
39/34
41/36
610×1,350×220
494/388
24,200
7.1
27,300
8.0
0.110
0.110
16/12
40/35
42/37
27.0
565/424
9.5
15.9
1-phase, 220-240 V/220 V, 50/60 Hz
21O.D.
Galvanised steel plate
Concealed Floor Standing Type
167 168
Ind
oo
r U
nit
s
VRV Indoor Units
Duct connection airflow type Direct airflow type
All-fresh (using outdoor air only) system Return + Outdoor air mixed system
Outside Air conditioning
Outdoor air introduction
Air conditioning
Circu
lated air
Outdoor air introduction
Outside
* Air introduced from the outside and circulated air must be mixed in the air conditioner primary side before introduction into the air conditioner.
Floor Standing Duct Type Spot Air ConditionerFXVQ-N
Large airflow type for large spaces
FXPQ-A
Personal air comfort delivered to large spaces
Notes: Specifications are based on the following conditions;• Cooling: Indoor temp.: 27°CDB, 19°CWB, Outdoor temp.: 35°CDB, Equivalent piping length: 7.5 m, Level difference: 0 m.• Heating: Indoor temp.: 20°CDB, Outdoor temp.: 7°CDB, 6°CWB, Equivalent piping length: 7.5 m, Level difference: 0 m.• Capacity of indoor unit is only for reference. Actual capacity of indoor unit is based on the total capacity index. (See Engineering Data Book for details.)*1: Sound level : measured when the air discharge outlet duct (2 m) is attached (anechoic chamber conversion value).
It increases by approximately 5 dB(A) when the plenum chamber is installed to deliver direct airflow.*2: The value is the external static pressure with standard pulley.
Large airflow rate
• Full-scale duct connection airflow allows for air conditioning evenly in spacious areas.
• Adding the plenum chamber (option) allows for simple operation with direct airflow.*Note that the operation sound increases by approximately 5dB(A).
• The belt drive system allows for use of air discharge outlets in various shapes as well as long ducts.
• A long-life filter (maintenance free up to one year*) is equipped as a standard accessory. *8 hr/day, 26 day/month. For dust concentration of 0.15 mg/m3
• A wide range of optional accessories are available such as high-efficiency filters.
• Outdoor air intake mode is useable as an outdoor-air processing air conditioner.*When using the unit as an outdoor-air processing unit, there are some restrictions. Strictly follow the restrictions specified in the Engineering Data Book.
Rp1 (PS 1B internal thread)
Long-life filter (anti-mould resin net)
Belt drive system
3-phase 4-wire system, 380–415 V, 50 Hz
Ivory white (5Y7.5/1)
FXVQ125NY1
15.9 (Brazing)
52
118
1,670×750×510
FXVQ250NY1 FXVQ400NY1 FXVQ500NY16
62
281
65
236
1,900×1,170×720
12.7 (Brazing)
FXVQ200NY1
0.53
14.0
47,800
22.4
76,400
16.0
54,600
25.0
85,300
28.0
95,500
31.5
107,500
45.0
50.0
154,000
171,000
1.61 3.97 2.62
390
6,072
172
5.5
66
306
4.701.33
22.2 (Brazing)
60
169
1,670×1,170×510
19.1 (Brazing)
9.5 (Brazing)
56
144
1,670×950×510
FXVQ500NY1
191,000
56.0
215,000
63.0
1,900×1,470×720
15.9 (Brazing)
0.75
43
1,518
152
1.5
69
2,436
217
86
3,036
281
3.7
134
4,730
420
165
5,825
142
mm
kg
dB(A)
mm
mm
mm
kW
m3/min
cfm
Pa
kW
0.53 1.61 3.97 2.62 4.701.33kW
kW
Btu/h
kW
Btu/h
Liquid
Gas
Drain
Type
Motor output
Airflow rate
External static pressure *2
Drive system
Casing colour
Sound level *1
Dimensions (H × W × D)
Machine weight
Piping connections
Power supply
Cooling capacity
Heating capacity
MODEL
Air filter
Fan
28.6 (Brazing)
Power consumption
Specifications
Heating
Coolingkcal/h
Btu/h
kW
kcal/h
Btu/h
kW
kW
kW
m3/min
cfm
Pa
dB(A)
mm
kg
mm
mm
mm
L/h
Liquid (Flare)
Gas (Flare)
Drain
Drain water
Casing
External static pressure (H)
Sound level (H)
Dimensions (H × W × D)
Machine weight
Airflow rate (H-L)
Power supply
Cooling capacity
Heating capacity
MODEL
Piping connections
Power consumption
Specifications
Heating
Cooling
1 phase, 220 V, 50/60 Hz
2,400
9,600
2.8
2,800
10,900
3.2
0.120/0.132
0.120/0.132
Fresh White (N9.3)
15-12/15-11
530-424/530-388
5/20
55
455 x 555 x 470
32
6.4
12.7
SGP20A (External Dia. 27.2/Internal Dia. 21.6)
8
FXPQ25AVN
* 1 In-house comparison testing
New type indoor units distribute large volumes of air even further. Depend-ing on use, extension ducts can also be connected and used.
Withstands oil mistsFor the heat exchanger cooling pipe, a material with 3 to 6 times*1 the durability of standard materials has been selected.
Condensation suppressionTo minimize condensation, the air duct and blowout tubes are double insulated. This enables use in kitchens and other highly humid environments.
Leakage failsafeAn emergency reservoir is fitted in the underframe beneath the drain pan. This provides reassuring backup against drain pan overflow.
Extended operating periodFor durability over the long term, the units are fitted with fan motors that can operate for about 40,000 hours.
Simple maintenanceEasy maintenance design includes front access for fan motor replacement.
Large propeller fan ensures a gentle, pleasant airflow.
Uses propeller fan
*Performance of this indoor unit is certified when used within 1 m from the outlet.
Notes: Specifications are based on the following conditions;• Cooling: Indoor temp.: 27°CDB, 19°CWB, Outdoor
temp.: 35°CDB, Equivalent piping length: 7.5 m, Level difference: 0 m.
• Heating: Indoor temp.: 20°CDB, Outdoor temp.: 7°CDB, 6°CDB, Equivalent piping length: 7.5 m, Level difference: 0 m.
• Capacity of indoor unit is only for reference. Actual capacity of indoor unit is based on the total capacity index.(See Engineering Data Book for details.)
• Sound level: Anechoic chamber conversion value, measured at a point 1.0 m downward from the unit centre. During actual operation, these values are normally somewhat higher as a result of ambient conditions.
• Power consumption values are based on conditions of rated external static pressure.
Flexible installation corresponds to site conditions. With temperature control available for each unit, air conditioning adjusts to individual preferences for personal air comfort.
169 170
Ind
oo
r U
nit
s
VRV Indoor Units
Clean Room Air ConditionerFXB(P)Q-P
Suitable for hospitals and other clean spaces
Notes: Specifications are based on the following conditions;• Cooling: Indoor temp.: 27°CDB, 19°CWB, Outdoor temp.: 35°CDB, Equivalent piping length: 7.5 m, Level difference: 0 m.• Heating: Indoor temp.: 20°CDB, Outdoor temp.: 7°CDB, 6°CWB, Equivalent piping length: 7.5 m, Level difference: 0 m.• Capacity of indoor unit is only for reference. Actual capacity of indoor unit is based on the total capacity index. (See Engineering Data Book for details.)*1: An intake air filter is only attached to the ceiling intake type. *2: HEPA filter sold separately. The dust collection efficiency of HEPA filter is 99.97%. However, air may slightly leak around the filter when installing.*3: Weight including HEPA filter and panel. *4: Anechoic chamber conversion value under JIS B 8616 test conditions. Value usually increases slightly in practice due to surrounding conditions. *5: The clean room air conditioner does not support DOP testing (leak test) based on GMP standards
(Standards for Manufacturing Control and Quality Control for Medical Devices ) due to slight leakage at time of product installation. *6: Weight including panel. *In the case of an installation in an operating theatre etc. where an air conditioner malfunction may have serious consequences, please build in redundancy with two or more outdoor units.
Class 10,000 clean room condition achieved with a HEPA filter (sold separately)Filtration
Easily provides the high cleanliness environment required by various industries
Daikin’s clean room air conditioners are specially designed to achieve an environment cleanliness class 10,000. These air conditioners easily realize a cleanliness-class environment and help create a proper environment of hospitals, food and beverage factories, electronics factories, and other spaces that require clean air.
Select the air flow system and installation method to match the layout and purpose of the room
Two types of clean room air conditioners are available – an integrated unit model and a separate outlet unit model.It is also possible to configure the air flow system to ceiling intake or floor-level intake according to the panel selected.This flexible design enables the air conditioner to easily adopt to any room layout or use.
The low pressure-loss HEPA filter (sold separately) demonstrates superior dust filtering performance and easily accomplishes an air cleanliness of class 10,000.
Prevents uncomfortable drafts with a low flow speed of approximately 0.5 m/sThe floor-level intake system has a low flow speed of approximately 0.5 m/s.
Suppresses the propagation of bacteria in the duct with a proprietary antibacterial coating Antibacterial
The filter implements an antibacterial treatment with a new coating combining a silver-based inorganic antibacterial material (an organic antibacterial material that is effective against germs) that prevents mould. This enhances the antibacterial properties of the duct.An antibacterial treatment using a silver-based organic substance reduces mould.
Antibacterial fiber used in the intake filterWith a long-life filter employing anti-mould antibacterial fiber near the intake, cleaning performance is further enhanced.
Separate outlet unit model
FXBPQ63PVE
BAF82A63
24,200
7.1
26/22.5
918/794
BAFH82A63
120 *6
65 *3
492×1,078×1,300
BYB82A63WPBYB82A63CP
9.515.9
Integrated outlet unit model
Integrated with the indoor unitFXBQ40PVE FXBQ50PVE FXBQ63PVE
cfm
dB(A)
mm
kg
mm
kW
kWBtu/h
kWBtu/h
Model
Liquid (Flare)
Gas (Flare)
DrainHEPA filter
Ceiling intake type
Floor-level intake type
Power consumption
Intake filter efficiency *1
Indoor unit weight
Outlet HEPA filter efficiency *2
Casing
Dimensions (H×W×D)
Outlet unit weight
Piping connections
Filter(Option)
Panel(Option)
Power supply
Type
Cooling capacity
Heating capacity
MODEL
m3/min
kg
Indoor unit
Outlet unit
Sound level (H/L) *4
Airflow rate (H/L)
15,400 19,100
4.5 5.617,100 21,500
5.0 6.327,300
8.0
0.31
70% by gravimetric method
Galvanised steel plate
99.97% by DOP method *5
–
44/42
PT1B
140 *3
19.5/17.5
688/618
185 *3
492×1,788×1,000
BAFH82A50
BYB82A50C
BYB82A50W
492×1,788×1,300
BYB82A63WBYB82A63C
0.45
kW
Cooling
Heating 0.31 0.45
1-phase, 220-240 V/220 V, 50/60 Hz
6.412.7
Specifications
• Sufficient heating may not be achieved near the floor or at locations far from the outlet. • In the case of utilization in a hospital, some patients may be susceptible to cool drafts, so please ensure that they do not come directly under the outlet.• Install multiple units using two or more outdoor unit systems for installations to rooms such as operating rooms where the failure of the air
conditioner may have serious consequences.• In order to maintain static pressure in a room, the indoor fan continues to operate even when an abnormality occurs due to the thermostat shutting
off, defrost operation, protection device operation, or similar issue.• When incorporating outdoor air from the fresh air intake, install a damper or similar device to the duct routing and have it interlocked with the
indoor fan so that the outdoor air is shut out when the fan stops. The air that incorporates the suction filter may flow backward and allow dust trapped in the filter to return to the room.• When using gas to disinfect hospital operating rooms where this unit is installed, stop operation and cover the air inlet and outlet with plastic sheets
to prevent the gas from reaching and damaging the air conditioner.
• Locations in which heating of the lower part or the entire room is important.
• Locations necessitating a particularly high cleanliness factor and in which there are many people.
Warning
Because the ceiling intake type provides concentrated air conditioning that blows directly under the outlet. Accordingly, please be aware of the following.
Use the floor-level intake type in the following kind of locations.
* Please be aware that antibacterial products suppress the propagation of bacteria but do not have a sterilizing effect. Also, mould may grow in places where dust or soot accumulates.
* A material for which the registered safety was verified by Japanese chemicals and dangerous substances regulation law (Act on the Evaluation of Chemical Substances and Regulation of Their Manufacture, etc) is used for the antibacterial material.
* Periodic maintenance is required (such as cleaning the air filter and washing the inside to the unit).
Fan
Intake panel (punching metal)
Sheet steel drain pan
(antibacterial treated)
HEPA filter Outlet panel (punching metal)
Intake filter
Instances of installation by type (for a hospital)
* 1. Cleanliness class. A scale expressing the cleanliness of air established by NASA (National Aeronautics and Space Administration). Class 10,000 represents a state of less than 10,000 minute particles of diameter under 0.5 μm per cubic foot. For comparison, the cleanliness of a typical office is around class 1,000,000.
* 2. CCU (Cardiac Care Unit). A ward dedicated to the admission of patients with myocardial infarctions and other heart diseases. * 3. ICU (Intensive Care Unit). A ward for the careful treatment and nursing of patients with serious illnesses, injuries, or recovering from operations.
Ceiling intake type(high speed contracted flow/high ceiling model)
Floor-level intake type(gentle wind distribution/high cleanness class model)
Construction work is simple and a ceiling installation is possible. Dust filtering and air-conditioning can be started immediately.
Easy to increase the cleanness and air-conditioning effect. A low flow speed prevents drying of the affected part and the experience of drafts.
100,000 to 10,000
Type
Features
Cleanness class*1
Wind speed
Blow method
Integrated outlet unit
model
Separate outlet unit
model
10,000
1.0 m/s or higher Approximately 0.5 m/s
Outlet unit
Air conditioner Intake
(sourced locally)
Applications: Surgery prep rooms, recovery rooms, nurse stations, etc.
Applications: CCU*2, sterile rooms, etc.
Applications: Operating theatres, delivery rooms, etc.
Applications: Premature nurseries, newborn nurseries, ICU*3, etc.
Intake (sourced locally)
• Concentrated air conditioning centered directly under the unit• Easy installation
• Somewhat concentrated air conditioning centered directly under the outlet
• Can provide air conditioning in rooms with irregular shapes
• Total air conditioning with an emphasis on cleanliness
• Total air conditioning with an emphasis on cleanliness • Maintenance possible from a different room
* It may not be possible to maintain cleanliness in rooms with low air tightness.
171 172
Ind
oo
r U
nit
s
Residential Indoor Units
Slim Ceiling Concealed Duct Type Wall Mounted Type
Installation flexibility
Comfort
Efficiency & comfort
Stylish design
FDKS-EA/C(A), CDXS-EA, FDXS-C
Note: *The operation sound level values represent those for rear-suction operation and an external static pressure of 30 Pa for FDKS/CDXS-EA and 40 Pa for FDXS/FDKS/CDXS-C(A). Sound level values for bottom-suction operation can be obtained by adding 6 dB(A) for FDKS/CDXS-EA and 5 dB(A) for FDXS/FDKS/CDXS-C(A).
Elegant appearance with curved panel
FTKJ-N, FTXJ-N
• The sleek design of the FTKJ-N indoor unit features a uniquely European style. This elegant body houses state-of-the-art technology which delivers superior performance. The FTKJ-N series offers a versatile choice for home-owners, designers and architects alike.
Two-area intelligent eyeA combination of Comfort Airflow Mode and Intelligent Eye directs airflow away from people to avoid impacts. If there is no movement in a room for 20 minutes, Intelligent Eye automatically adjusts the set temperature by approximately 2°C to save energy.
Comfort Airflow ModeComfort Airflow Mode prevents uncomfortable impacts from blowing directly to a person’s body. During cooling operation, the flap moves upwards to prevent cold impacts.
3D Airflow3D Airflow combines Vertical and Horizontal Auto-Swing to reduce indoor temperature fluctuation. This function circulates air to every part of a room for uniform cooling, even for large spaces. To start 3D Airflow, push both the Vertical and Horizontal Auto-Swing buttons. The flaps and louvers swing in turn.
12.79.5
47/35/3245/29/2041/28/1946/35/3245/26/2038/25/19
12.4 (438)11.9 (420)10.4 (367)10.8 (381)10.6 (374)
12.79.5
8.3 (293)
46/35/2945/26/2038/25/1910.9 (385)8.9 (313)
1-phase, 220-240 V/220-230 V, 50/60 Hz
Standard accessoryStandard accessory
Note: Remote controllers other than the standard accessory wireless remote controller cannot be used.
Only 200 mm in height, this model can be installed in rooms with as little as 240 mm in height for the ceiling space between the drop-ceiling and ceiling slab.
• Home Leave Operation prevents large increase or decrease in the indoor temperature by continuing operation* while someone is sleeping or left the house. This means that an air-conditioned welcome awaits when someone wakes up or returns. It also means that the indoor temperature can quickly return to the preferred comfort setting.
200 mm
Only 700 mm
FDKS-EA, CDXS-EA
8.7 (307)
200X700X620 200X900X620 200X1,100X6203027
40
25
VP20 (External Dia. 26/Internal Dia. 20)Both liquid and gas pipes
21
30
9.5 (335) 10.0 (353) 12.0 (424)
37/33/3135/31/29
16.0 (565)
38/34/32
1-phase, 220-240 V/220-230 V, 50/60 Hz
5 steps, quiet and automaticMicrocomputer control
Power supply
Airflow rates (H) m3/min(cfm)
Sound levels (H/L/SL)* dB(A)
Fan speed
Temperature control
Dimensions (H × W × D) mm
kg
mm
Pa
Machine weight
Liquid (Flare)
Gas (Flare)
Drain
Pipingconnections
Heat insulation
External static pressure
9.5 6.4
12.7
CDXS25EAVMA CDXS35EAVMA FDXS25CVMA FDXS35CVMA FDXS50CVMA FDXS60CVMAMODEL
Cooling Only
Heat Pump
FDKS25EAVMB FDKS35EAVMB FDKS25CAVMB FDKS35CAVMB FDKS50CVMB FDKS60CVMB
Specifications
*Home Leave Operation can be selected for any temperature from 18 to 32˚C for cooling operation and 10 to 30˚C for heating operation.*Home Leave Operation function must be set using the remote controller when going to sleep or leaving the house, and after waking up or returning home.
240 mm
Notes: 1. To prevent an increase of the operation noise, avoid installing the air suction grille directly below the suction chamber.
2. Grilles, piping connections, ducts, and installation parts should be obtained locally. Slim Ceiling Mounted Duct type models do not have drain-up pumps.
3. The signal receiver unit must be located near the air suction inlet, because the unit includes a sensor that detects room temperature.
* Locally obtained partsAIR
AIR
Air suction grille*
Suction duct*
Signal receiver
Air discharge duct*
Suspension bolt*
Air discharge grille*
Signal receiver wireLength = 1,900 mm
Chamber
Air filter
Signals from the wireless remote controller aretransmitted to the signal receiver.
240 mm
FTXJ50NVMVSFTXJ50NVMVWFTXJ35NVMVSFTXJ35NVMVWFTXJ25NVMVSFTXJ25NVMVW
SilverWhiteSilverWhiteSilverWhite
SilverWhiteSilverWhiteSilverWhite
kgMachine weight
mmDimensions (H × W × D)
dB(A)Sound level (H/L/SL) Heating
Cooling
m3/min(cfm)Airflowrate (H) Heating
Cooling
mmPipingconnections
Drain
Gas
Liquid
Front panel colour
Power supply
Both liquid and gas pipes
12303x998x212
Microcomputer control5 steps, quiet and automatic
18.0
6.4
Heat insulation
Temperature control
Fan speed
Heat PumpMODEL
SpecificationsFTKJ50NVMVSFTKJ50NVMVWFTKJ35NVMVSFTKJ35NVMVWFTKJ25NVMVSFTKJ25NVMVWCooling Only
kgMachine weight
mmPipingconnections
Drain
Both liquid and gas pipes18.0
5 steps, quiet and automaticMicrocomputer control
303x998x212126.4
1-phase, 220-240 V/220-230 V, 50/60 Hz
Heat insulation
MODEL
Gas (Flare)
Liquid (Flare)
mmDimensions (H × W × D)
dB(A)Sound levels (H/L/SL)
m3/min(cfm)Airflow rates (H)
Temperature control
Fan speed
Front panel colour
Power supply
• Low operation sound level: down to 29 dB(A)
Slim and smooth design suits your shallow ceiling Elegant appearance with European style
Great forhotel use!
Residential Indoor Units
173 174
Ind
oo
r U
nit
s
BPMKS967A2BPMKS967A3
BP unit
Wall Mounted Type BP UnitsBP units for connection to residential indoor units
Efficiency & comfort
Cleanliness
FTKS-D/B/F, FTXS-D/E/F
Stylish flat panel harmonises with your interior décor
Note: *For Heat Pump type only.
Connectable to residential indoor units
• Intelligent Eye with its infrared sensor automatically controls air conditioner operation according to human movement in a room. When there is no movement, it adjusts the temperature by 2˚C for energy savings.
• Low sound level: down to 22 dB(A)
BP units allow VRV systems to be connected to Daikin’s stylish and quiet residential indoor units.
Quiet operating sound
Expansion valves tend to create refrigerant passing noise. However, this noise can be reduced by installing the valves in BP units. The units can be fitted inside the ceiling or roof-space far from an indoor unit.Some Daikin residential indoor units also provide minimum sound levels of just 19 dB(A).
Titanium Apatite Deodorising FilterWhile the filter’s micron-level fibres trap dust, titanium apatite effectively adsorbs odours and allergens, as well as deodorises odours.*This filter is not a medical device. Benefits such as the adsorption of odours and allergens and deodorisation of odours are only effective for substances which are directly attached to the Titanium Apatite Deodorising Filter.
• 3-D Airflow combines Vertical and Horizontal Auto-Swing to circulate air to every part of a room for uniform cooling of even large spaces.* This function is available for FTK(X)S50/60/71F.
Specifications
283×800×195 290×795×2389
8.7 (307) 8.9 (314) 14.7 (519) 16.2 (572) 17.4 (614)9.4 (332) 9.7 (342) 16.2 (572) 17.4 (614) 21.5 (759)
37/25/22 FTKS: 39/26/23FTXS: 38/26/23
FTKS: 43/34/31FTXS: 44/35/32
45/36/33 46/37/34
37/28/25 38/29/26
11.4 (402)–
44/35/32
– 42/33/30 44/35/32 46/37/34
1-phase, 220-240 V/220-230 V, 50/60 Hz
5 steps, quiet and automaticMicrocomputer control
Both liquid and gas pipes
White
6.4
18.0 9.5 12.7 15.9
290×1,050×23812
FTXS20DVMA FTXS25EVMA FTXS35EVMA FTXS50FVMA FTXS60FVMA FTXS71FVMAPower supply
Front panel colour
Airflow rates (H)
Cooling m3/min(cfm)
dB(A)
mm
kg
mm
Heating*
Cooling
Heating*
Sound levels (H/L/SL)
Fan speed
Temperature control
Dimensions (H × W × D)
Machine weight
Liquid (Flare)
Gas (Flare)
Drain
Pipingconnections
Heat insulation
MODELCooling Only
Heat Pump
FTKS25DVM FTKS35DVM FTKS50BVMA FTKS50FVM FTKS60FVM FTKS71FVM––
When you are in the room When you go out
A uniform temperature is achieved throughout the entire room.
Standardaccessory*
*Remote controllers other than the standard accessory wireless remote controller cannot be used.
Cooling Only
Heat Pump
FTKS25D / FTKS35D
FTXS20D / FTXS25E / FTXS35E
Cooling Only
FTKS50B
Cooling Only
Heat Pump
FTKS50F / FTKS60F / FTKS71F
FTXS50F / FTXS60F / FTXS71F
The BP units can be installed inside the ceiling.
Specifications
Note: *Total auxiliary piping length.
14.220.8
2 for power supply (including earth wiring), 2 for interunit wiring (outdoor unit-BP, BP-BP),
3 for interunit wiring (BP-indoor unit)
3 for power supply (including earth wiring), 2 for interunit wiring (outdoor unit-BP, BP-BP),
4 for interunit wiring (BP-indoor unit)
kWMax. rated capacity of connectable indoor
2.0
180X294 (+356*)X3500.0510
15.9X215.9X319.1X1
6.4X26.4X3
7.58
9.5X1
2 (connectable to 1-2 indoor units)3 (connectable to 1-3 indoor units)1-phase, 220-240 V/220-230 V, 50/60 Hz
kWMin. rated capacity of connectable indoor
kgMachine weight
mmDimensions (HXWXD)
ARunning current
WPower consumption
2.0 kW class to 7.1 kW classConnectable indoor units
Both liquid and gas pipesHeat insulation
kW
kW
Branch
MainGas
Branch
MainLiquid
Piping connections(Brazing)
Number of wiring connections
MODEL
Power supply
Number of ports
Min. sound level 19 dB(A)
175 176
Air
Han
dlin
g U
nit
/ A
ir T
reat
men
t Eq
uip
men
t
Air Treatment Equipment
Air Handling Unit Air Treatment Equipment
Integrate your air handling unit in a total solution for large sizespaces such as factories and large stores.
Daikin air handling units can be connected to VRV systems. This combination can be built to order as a system. Outdoor air series is also possible. Please contact your local sales office for details.
Liquid pipeGas pipeDaikin communication wire (F1, F2 communication)Other communication wire
System overview
Air handling unit
AHURCapacity range : 6 – 120 HP
Outdoor-AirProcessing Unit VKM-GAM Type VKM-GA Type VAM-GJ Type
Refrigerant Piping Connectable Not connectable
Wiring Connectable Connectable
After-cool &After-heat Control
Available Not available
—
— — —
Energy savings obtained
Fitted
Option Option
Air supply only Air supply & air exhaust
220-240 V, 50 Hz 220-240 V/220 V, 50 Hz/60 Hz
Heat Reclaim Ventilator
Connectionswith VRV systems
Connectable
Connectable
Available
Heat Exchange Element Energy savings obtained
Humidifier
High Efficiency Filter Option
Ventilation System Air supply & air exhaust
Power Supply 220-240 V, 50 Hz
Airflow Rate
150 m3/h250 m3/h350 m3/h500 m3/h650 m3/h800 m3/h
1080 m3/h 1000 m3/h
500 m3/h
800 m3/h1000 m3/h
1680 m3/h1500 m3/h
2100 m3/h2000 m3/h
*Refers to bringing outdoor air to near indoor temperature and delivering to a room.
*1 For models: VAM150/250/350/650/800/1000/2000GJVE*2 For models: VAM150/350/500GJVE
A recent trend rapidly gaining popularity is for air treatment to be required as well as air
conditioning. Daikin’s Outdoor-Air Processing Unit can combine fresh air treatment and air
conditioning, supplied from a single system. It adjusts the temperature of air from outdoors
using a fixed discharge temperature control. Along with Outdoor-Air Processing Units, we also
offer Heat Reclaim Ventilator systems. The Heat Reclaim Ventilator VAM-GJ series units in
particular have been praised for their compactness, energy conservation and extensive
operation range of outdoor temperatures. This series provides higher enthalpy efficiency*1, due
to the greatly enhanced performance of the thin film element. Furthermore, improved external
static pressure*2 offers more flexibility for installation. The Heat Reclaim Ventilator VKM-GAM
series units, equipped with a DX-coil and a humidifier, provide further advanced features, such
as temperature adjustment to suit conditions indoors and to prevent cold air from blowing on
people directly during heating operation. The series also realises significant energy savings by
exercising heat recovery.
Daikin’s air treatment systemscreating a higherair quality environment
Componentsof Indoor Air Quality
*Refers to bringing outdoor air to near indoor temperature and delivering to a room.
Ventilation Humidification
Air Processing*
Ventilation Humidification
Air Processing*
Ventilation Humidification
Air Processing*
Ventilation Humidification
Air Processing*
• Easy design and installationThe system is easy to design and install since no addi-tional water systems such as boilers, tanks and gas connections etc are required.
• Inverter controlled units
• Control of air temperature via standard Daikin wired remote control for standard series
177 178
Air
Tre
atm
ent
Equ
ipm
ent
Air Treatment Equipment
LineupFXMQ125MFV1Model Name
Capacity Index
FXMQ200MFV1 FXMQ250MFV1
125 200 250
Navigation Remote Controller(Wired remote controller) (option)
BRC1E63
Air Treatment Equipment
Combine fresh air treatment and air conditioning, supplied from a single system.
Air conditioning and outdoor air processing can be accomplished using a single system.
Fresh air treatment and air conditioning can be achieved with a single system by using heat pump technology — without the usual troublesome air supply and air discharge balance design. Fan coil units for air conditioning and an outdoor-air processing unit can be connected to the same refrigerant line. This results in enhanced design flexibility and significant reduction in total system costs.
The following restrictions must be observed in order to maintain the indoor units connected to the same system.
• When outdoor-air processing units are connected, the total connection capacity index must be 50% to 100% of the capacity index of the outdoor units.
• When outdoor-air processing units and standard indoor units are connected, the total connection capacity index of the outdoor-air processing units must not exceed 30% of the capacity index of the outdoor units.Because connection is possible depending on conditions ever when the capacity index of outdoor-air processing units exceeds 30% of the capacity index of the outdoor units, contact your local distributor.
• Outdoor-air processing units can be used without indoor units.
• The unit introduces outdoor air and adjusts the outdoor air temperature via fixed discharge temperature control, thereby reducing the air conditioning load.
• High-performance filters with dust collection efficiencies (JIS calorimetry) of 90% and 65% are also available as options.
• For the VRV system, a variety of control systems can be deployed, including remote control from distances of up to 500 m.
• The “self-diagnosis function” indicates the occurrence and nature of abnormalities in the system by displaying codes on the remote controller.
• A central control system compatible with the VRV system can be installed.
• With the VRV system, the equipment employs the “super wiring system” so that the wiring linking the indoor and outdoor units can also be utilised for central control.
• Ceiling mounted duct units with three different capacities are available. These can be connected to VRV series outdoor units to meet a variety of different requirements.
• Optional equipment includes long-life filters.
• Compatible with outdoor temperatures from -5°C to 43°C.
Combination with VRV system
* The system can operate with outdoor-air temperatures ranging from -5 to 43°C. Heating performance is somewhat adversely affected when the outdoor-air temperature is 0°C or below.
* When shipped from the factory, the thermostat is set at 18°C for cooling. The set temperature can be varied within the range of 13–25°C during cooling operation, in the local setting mode using the wired remote controller. The temperature, however, is not displayed on the remote controller.
* While in machine protection mode and depending on outdoor air conditions, discharge air temperature may not be at the set temperature.
* The fan stops when operating in defrosting, oil returning and hot start operations. The fan may stop due to mechanical protection control.
* It is not possible to change the discharge air temperature settings from the central control system.
* Do not associate this equipment in areas which standard indoor units are installed, as central control cannot be used with them.
* Group control is not possible between this unit and standard type indoor units. Remote controllers connect to each unit separately.
Notes: 1. The data shown in the graph illustrates the supported operation ranges under the following conditions.
Indoor and Outdoor UnitEffective piping length: 7.5 mHeight differential: 0 m
2. The discharge temperature can be set using the remote controller. However, the actual temperature may not match the temperature setting under some circumstances due to the outdoor-air processing load or mechanical protection controls.
3. The system will not operate in fan mode when the outdoor air temperature is 5°C or below.
Notes: * Linked control of the product and the Heat Reclaim Ventilator is not supported.
* This equipment is intended for the treatment of outdoor air only. It is not to be used for maintaining indoor air temperature, Installing or use with standard indoor units. Be sure to position the air discharge openings of the product in positions where the airflow will not blow on people directly. When outdoor-air processing is in excess, the unit switches to thermo-off mode, and outdoor air flows into the room directly.
* For outdoor ducts, be sure to provide heat insulation to prevent condensation.
* Group control of the product and standard indoor units is not supported. A separate remote controller should be connected to individual unit.
* The system will not operate in fan mode when the outdoor air temperature is 5°C or below.
* If the product is utilised to operate 24 hours a day, maintenance (part replacement, etc.) must be performed periodically.
* Temperature setting and Power Proportional Distribution (PPD) are not possible even if the intelligent Touch Controller or the intelligent Touch Manager is installed.
* The remote controller wired to the outdoor-air processing unit must not be set as the master remote controller. Otherwise, when set to “Auto,” the operation mode will switch according to the outdoor air conditions, regardless of the indoor temperature.
Airflow rate
2,100 m3/h
1,680 m3/h
1,080 m3/h
FXMQ250MFV1
FXMQ200MFV1
FXMQ125MFV1
–5 15 19 (33.5) 43
32
Usage Limitations
Supported Heating
Operation Range
FanOperation
Supported CoolingOperation Range
Outdoor Air T
empera
ture
(°CW
B)
100%
Rela
tive
Hum
idity
90%
Rela
tive
Hum
idity
20% Relative
Humidity
30% Relative Humidity
Central remote controller (option)DCS302CA61
Connection Conditions
Outdoor-air processing unit
Outdoor-Air Processing Unit
Indoor Unit Indoor Unit
AirConditioning
OutdoorAir Supply
VRV Outdoor Units
179 180
Air
Tre
atm
ent
Equ
ipm
ent
Air Treatment Equipment
Air Treatment Equipment
Standard specifications Dimensions
Options
Indoor unit
MODEL
Operation remote controller
FXMQ125MFV1 FXMQ200MFV1 FXMQ250MFV1
BRC1H61W(K) / BRC1E63 / BRC2E61
DCS302CA61
DCS301BA61
DST301BA61
KRP2A61
KRP4AA51
KAFJ371L140 KAF371M280
KAFJ372L140 KAF372M280
KAFJ373L140 KAF373M280
KDJ3705L140 KDJ3705L280
Ope
ratio
n/co
ntro
lFi
lters
Central remote controller
Long-life replacement filter
Colourimetric method 65%
Colourimetric method 90%High-efficiency filter
Filter chamber *1
KRP1B61Adaptor for wiring
KDU30L250VEDrain pump kit
Unified ON/OFF controller
Schedule timer
Wiring adaptor for electrical appendices (1)
Wiring adaptor for electrical appendices (2)
BAF429A20ACPM2.5 with activated carbon filtration unit *2
BAF429A20APM2.5 filtration unit *2
Ceiling Mounted Duct Type
MODEL
Type
Power supply
Cooling capacity *1
Machine weight
Sound level *3
FXMQ125MFV1 FXMQ200MFV1 FXMQ250MFV1
1-phase 220-240 V (also required for indoor units), 50 Hz
0.380
18 28 35
185/225 225/275 205/255
9.5 (flare)
15.9 (flare) 19.1 (brazing) 22.2 (brazing)
PS1B female thread
86 123
42/43 47/48
8 HP and above6 HP and above 10 HP and above
Dimensions (H × W × D) 470 × 744 × 1,100 470 × 1,380 × 1,100
Btu/h 47,800 76,400 95,500
kW 14.0 22.4 28.0
Heating capacity *1Btu/h 30,400 47,400 59,400
kW 8.9 13.9 17.4
mm
Casing Galvanised steel plate
kW
m3/min
Pa
Drain
mm
mm
mm
kg
dB(A)
Motor output
Airflow rate635 988 1,236cfm
Fan
Refrigerantpiping
External static pressure
Liquid
Gas
Connectable outdoor units *4
-5 to 15°C
19 to 43°CCooling
Heating
Cooling
Heating Range of the discharge temperature *5
Operation range (Fan mode operation between 15 and 19°C)
13 to 25°C
18 to 30°C
Power consumption 0.359 0.6380.548kW
220 V/240 V
220 V/240 V
Air filter *2
Indoor unit
Notes: *1. Specifications are based on the following conditions:• Cooling: Outdoor temp. of 33°CDB, 28°CWB (68% RH), and discharge temp. of 18°CDB.• Heating: Outdoor temp. 0°CDB, -2.9°CWB (50% RH), and discharge temp. of 25°CDB.• Equivalent reference piping length: 7.5 m (0 m horizontal)
*2. An intake filter is not supplied, so be sure to install the optional long-life filter or high-efficiency filter. Please mount it in the duct system of the suction side. Select a dust collection efficiency (gravity method) of 50% or more.
*3. Anechoic chamber conversion value, measured at a point 1.5 m downward from the unit centre. These values are normally somewhat higher during actual operation as a result of ambient conditions.
*4. It is possible to connect to the outdoor unit if the total capacity of the indoor units is 50% to 100% of the capacity index of the outdoor unit.*5. Local setting mode is not displayed on the remote controller.• This equipment cannot be incorporated into the remote group control of the VRV system.
Inspection hole 600 or more
(All around)
650
or m
ore
(Ser
vice
spa
ce)
1148
1100 or more(Service space)
App
rox.
150
910
C
AB
D
A View
3X10
0=30
0
50
470
Suction side (Note.2)
760
1100
613
2 51 4611Discharge side
30
3
B View
*These diagrams are based on FXMQ200 and FXMQ250MFV1.
Local connection piping size
FXMQ200MFV1
FXMQ125MFV1
Model Gas piping diameter 15.9
19.1 attached piping
Liquid piping diameter 9.5 9.5
FXMQ250MFV1 22.2 attached piping 9.5
Table of dimensions
FXMQ200MFV1
FXMQ125MFV1
Model A B C744 685 5X100=500
1380 1296 11X100=1100
D20- 4.7 hole32- 4.7 hole
FXMQ250MFV1 1380 1296 11X100=1100 32- 4.7 hole
2
1 Liquid pipe connection2 Gas pipe connection3 Drain piping connection4 Electric parts box5 Ground terminal6 Name plate
7 Power supply wiring connection8 Transmission wiring connection9 Hanger bracket
10 Discharge companion flange11 Water supply port12 Attached piping (Note. 1)
360
250
3X10
0=30
033
0
B View
390
30
296
25
630
5X100=500600
20- 7 hole(All around)
8
360
200
250
346
10-M5 hole(All around)
2X200=400
580
630
7
61
A View A View1230
11X100=11001200
245
390
30
60
296
25
360
250
3X10
0=30
033
0
32- 7 hole(All around)
12
8
1004
5X200=1000
123016-M5 hole(All around)
360
200
250
330
B View (For FXMQ250MFV1)
7
5X200=1000
1230
580
360
200
250
330
16-M5 hole(All around)
B View (For FXMQ200MFV1)
7
FXMQ125/200/250MFV1
FXMQ200/250MFV1 FXMQ125MFV1
Notes: 1. The attached piping in the diagram is for FXMQ200MFV1 and FXMQ250MFV1 only. The gas piping connection port ( in the diagram) has a different bore form with FXMQ125MFV1.
2. An air filter is not supplied with this unit. Be sure to mount an air filter in the suction side. [Use a filter with dust collection efficiency of at least 50% (gravimetric method). This is available as an option.]
3. For outdoor ducts, be sure to provide heat insulation to prevent condensation.
Notes: *1. Filter chamber has a suction-type flange. (Main unit does not.)• Dimensions and weight of the equipment may vary depending on the options used.• Some options may not be usable due to the equipment installation conditions, so please confirm prior to ordering.• Some options may not be used in combination.• Operating sound may increase somewhat depending on the options used.
*2. Refer to pages 191 - 192 for details.
181 182
Air
Tre
atm
ent
Equ
ipm
ent
Air Treatment Equipment
Heating and cooling+
+
Heat Recovery
Humidifying
–5 0 5 10 15 20
Dry bulb temperature (°CDB)
25 30 35 40
Rel
ativ
e h
um
idit
y (%
)
20
40
6080100
Effect of full heat exchangeEffect of full heat exchange
Effect of full heat exchangeEffect of cooling
Outdoor air temperature in summer
Indoor temperature during heating
Indoor temperature during cooling
Outdoor air temperature in winter Effect of heatingEffect of heating
Effect of humidificationEffect of humidification
Indoor Unit Indoor Unit
VRV Outdoor Units
Air-Conditioning AirAir
Supply
ReturnAir
Heat Reclaim Ventilator with DX Coil & Humidifier
Outdoor Air
Exhaust Air
Air Treatment Equipment
The heat reclaim ventilator lineup features the DX-coil in response to recently diversifying outdoor air introduction requirements.
A compact unit packed with Daikin’s cutting-edge technologies.
Efficient outdoor air introduction with heat exchanger and cooling/heating operation.
Air conditioning and outdoor air processing can be accomplished using a single system.
Model Name
LineupWith DX Coil & Humidifier Type
Capacity Index 62.5
VKM100GAMV1
50
VKM80GAMV1
31.25
VKM50GAMV1
Model Name
With DX Coil Type
Capacity Index 62.5
VKM100GAV1
50
VKM80GAV1
31.25
VKM50GAV1
The Heat Reclaim Ventilator (VKM series) series introduces fresh outdoor air with minimum heat losses, with a wide variety of features to cater to customer requirements.
Efficient outdoor air introduction is possible
The lineup includes models with a humidifier, in response to diverse customer requirements. (VKM50/80/100GAMV1 only)
Humidifier
Using outdoor air, the temperature can be brought near room temperature with minimal cooling capacity through the use of outdoor air.
Indoor unit with outdoor air treatment
• Integrated system includes ventilation and humidifying operations.
• Ventilation, cooling/heating and humidifying are possible with one remote controller.
Other features
The Heat Reclaim Ventilator features DX-coil that contributes to the prevention of cold airflow colliding people directly during heating operation, due to the after-cool, after-heat operations done beforehand.
DX-coil
High external static pressure means enhanced design flexibility.
High static pressure
HEP Element(Anti-mould)
OA(Fresh air from outdoors)
SA(Supply air to room)
EA(Exhaust air to outdoors)
RA(Return air from room)
Air Supply Fan
Electronics Box(Control box)
Exhaust FanHeat Exchanger Elements
Damper
Damper Motor
Humidifier element30.6°C62% RH
27.4°C63% RH
26°C50% RH
Integrally-formed liner
Indoor
SA
RA
Outdoor
32°C70% RH
Operation of the heat exchanger element
DX-coil (Direct expansion coil)
Heatingby DX-Coil
Heat exchange
To the Outdoor 10.4°C
Outdoor AirFrom the Outdoor 7°C
From the Indoor 20°CReturn Air
To the Indoor 24.5°CSupply Air
HumidificationNatural Evaporating Pan Type Humidifier
Exhaust Air36.5°C16.6°C
Outdoor Indoor
Structure of VKM series
Heating and humidification process
Humidification:5.4kg/h (VKM100GAMV1)
The Outdoor air is heated from 16.6°C to 36.5°C with DX-coil, Natural Evaporating Pan Type Humidifier is passed and humidification capacity is improved.
DX-Coil: Heat Exchanger which heating or cooling the air by VRV outdoor unit’s refrigerant.
The following restrictions must be observed in order to maintain the indoor units connected to the same system.
• When the Heat Reclaim Ventilator VKM series units are connected, the total connection capacity index must be 50% to 130% of the capacity index of the outdoor units.
Connection Conditions
Integrally-formed liner
Temperatureand humidity
RA
SA
Heat Reclaim Ventilator with DX-coil and Humidifier(VKM Series)
183 184
Air
Tre
atm
ent
Equ
ipm
ent
Air Treatment Equipment
200
Air Treatment Equipment
Specifications Dimensions
Options
kg/h
%
%
%
kW
mm
Net
Gross *8kg
Around Unit
OA *9
RA *9
mm
MODEL
Power Supply
Airflow rate
Static pressure Pa
Airflow rate
Static pressure Pa
Heat exchange mode
Bypass mode
Airflow rate
Static pressure Pa
kW
Ultra-high
High dB(A)
Low
Ultra-high
High dB(A)
Low
Ultra-high
High W
Low
Ultra-high
High W
Low
Airflow Rate & Static Pressure *7
Ultra-high
High
Low
Heat exchange mode
Bypass mode
Fan Type
Motor Output
Sound Level *5
(220/230/240 V)
Humidification Capacity *4
Temp. Exchange Efficiency
Ultra-high
High
Low
Enthalpy Exchange Efficiency (Cooling)
Ultra-high
High
Low
Efficiency (Heating)
Ultra-high
High
Low
Casing
Insulating Material
Heat Exchanging System
Heat Exchanger Element
Air Filter
DX-coilCapacity
Cooling *2
Heating *3
Height
Width
Depth
Dimensions
Machine Weight
Unit Ambient Condition
Connection Duct Diameter
Power Consumption
VKM50GAV1 VKM80GAV1 VKM100GAV1R-410A
1-phase, 220–240 V, 50 Hz500160500120440100
750 950140 110750 95090 70640 82070 60
560490420560490420
620560470620560470
670570480670570480
Sirocco Fan0.280 x 2 0.280 x 2 0.280 x 2
37/37.5/3835/35.5/3632/33/34
37/37.5/3835/35.5/3632/33/34
38.5/39/4036/37/37.533/34/35.538.5/39/4036/37/37.533/34/35.5
39/39.5/4037/37.5/38
34/34.5/35.539/39.5/4037/37.5/38
34/34.5/35.52.7 4.0 5.476 78 7476 78 74
77.5 79 76.564 66 626467
6668
6266
67 71 656769
71 6573 69
Galvanised Steel PlateSelf-Extinguishable Urethane Foam
0°C–40°CDB, 80%RH or less-15°C–40°CDB, 80%RH or less0°C–40°CDB, 80%RH or less
387 387 3871,764 1,764 1,764832 1,214 1,214
500180500150440110560490420560490420
0.280 x 238/38.5/3936/36.5/37
33.5/34.5/35.538/38.5/3936/36.5/37
33.5/34.5/35.5
7676
77.5646467676769
75017075012064080
620560470620560470
0.280 x 240/41/41.537.5/38/3934.5/36/3740/41/41.537.5/38/3934.5/36/37
—787879666668717173
95015095010082070670570480670570480
0.280 x 240/40.5/4138/38.5/3935/36/36.540/40.5/4138/38.5/3935/36/36.5
7474
76.5626266656569
2.83.2387
1,764832
20096
2.83.2
4.55.0
5.66.3
4.55.0387
1,7641,214
109—
5.66.3387
1,7641,214
114102107
120129
125134
250 250
Multidirectional Fibrous FleecesSpecially Processed Nonflammable Paper
Air to Air Cross Flow Total Heat (Sensible + Latent Heat) Exchange
m³/h
m³/h
m³/h
Refrigerant
Enthalpy Exchange
VKM50GAMV1 VKM80GAMV1 VKM100GAMV1
Central remote controller
Remote controller
Wiring adaptor for electrical appendices
Unified ON/OFF controllerSchedule timer
For humidifier running ON signal output
Installation box for adaptor PCB
For wiring
Type (VRV indoor unit)
For heater control kit
Silencer
PCB
Ada
ptor
Add
ition
al fu
nctio
nC
ontr
ollin
g de
vice
BRC1H61W(K) / BRC1E63 *1
DCS302CA61
Residential central remote controller DCS303A51 *2
DCS301BA61
DST301BA61
KRP2A61
KRP50-2
BRP4A50
—
FXFSQ-A
KRP1H98A*2, 3
FXDQ-PDFXDQ-ND
FXLQ-MAFXNQ-MA
FXBQ-P FXBPQ-P
FXZQ-A
KRP1BB101*4
FXFQ-A FXEQ-A
— —
KRP1B61
FXCQ-A
KRP1C67
FXPQ-A
KRP1C96*2, 3
KRP4A98*2, 3
KRP4A97*2, 3
KRP4B93*2, 3
KRP4A987*2, 3, 5
FXDSQ-A FXDQ-SP FXSQ-PA FXMQ-PA
KRP1CA93*3
KRP1D93A*3
— KRP1BA97 ——
FXMQ-P FXUQ-A FXHQ-MA FXHQ-A FXAQ-A FXVQ-N
— KRP1C67KRP1C13A ——
KRP1BB101*4
Centralised controlling device
VKM50/80/100GA(M)V1ItemType
High efficiency filter
Flexible duct (1 m)Flexible duct (2 m)
KDDM24B100
250
K-DGL200C
—
K-DGL250C
200 250
KAF242J80M KAF242J100MAir filter for replacement KAF241G80M KAF241G100M
K-FDS201E K-FDS251EK-FDS202D K-FDS252E
—
White
ItemType
Nominal pipe diameter
mm
Nominal pipe diameter
mm
VKM50GA(M)V1 VKM80GA(M)V1 VKM100GA(M)V1
Notes: 1. Cooling and heating capacities are based on the following conditions. Fan is based on High and Ultra-high. When calculating the capacity as indoor units, use the following figures: VKM50GAMV1/GAV1: 3.5 kW, VKM80GAMV1/GAV1: 5.6 kW, VKM100GAMV1/GAV1: 7.0 kW
2. Indoor temperature: 27°CDB, 19°CWB, Outdoor temperature: 35°CDB3. Indoor temperature: 20°CDB, Outdoor temperature: 7°CDB, 6°CWB4. Humidifying capacity is based on the following conditions:
Indoor temperature: 20°CDB, 15°CWB, Outdoor temperature: 7°CDB, 6°CWB5. The operating sound measured at the point 1.5 m below the centre of the unit is
converted to that measured in an anechoic chamber built in accordance with the JIS C 1502 conditions. The actual operating sound varies depending on the surrounding conditions (near running unit’s sound, reflected sound and so on) and is normally higher than this value. For operation in a quiet room, it is required to take measures to lower the sound. For details, refer to the Engineering Data.
6. The noise level at the air discharge port is about 8–11 dB(A) or higher than the unit’s operating sound. For operation in a quiet room, it is required to take measures to lower the sound.
7. Airflow rate can be changed over to Low mode or High mode.8. In case of holding full water in humidifier.9. OA: fresh air from outdoor. RA: return air from room.
10. Specifications, design and information here are subject to change without notice.11. Power consumption and efficiency depend on the above value of airflow rate.
12. Temperature exchange efficiency is the mean value for Cooling and Heating. Efficiency is measured under the following condition: Ratio of rated external static pressure outdoor to indoor is kept constant at 7 to 1.
13. In heating operation, freezing of the outdoor unit’s coil increases. Heating capability decreases and the system goes into defrost operation. During defrost operation, the fans of the unit continues driving (factory setting). The purpose of this is to maintain the amount of ventilation and humidifying.
14. When connecting with a VRV system heat recovery outdoor unit and bringing the RA (exhaust gas intake) of this unit directly in from the ceiling, connect to a BS unit identical to the VRV indoor unit (master unit), and use group-linked operation. (See the Engineering Data for details.)
15. When connecting the indoor unit directly to the duct, always use the same system on the indoor unit as with the outdoor unit, perform group-linked operation, and make the direct duct connection settings from the remote controller. (Mode No. “17 (27)” – First code No. “5” – Second code No. “6”.) Also, do not connect to the outlet side of the indoor unit. Depending on the fan strength and static pressure, the unit might back up.
Feed clean water (city water, tap water or equivalent). Dirty water may clog the valve or cause dirt deposits in the water container, resulting in poor humidifier performance. (Never use any cooling tower water and heating-purpose water.) Also, if the supply water is hard water, use a water softener because of short life.* Life of humidifying element is about 3 years (4,000 hours) under the supply water
conditions of hardness: 150 mg/l. (Life of humidifying element is about 1 year (1,500 hours) under the supply water conditions of hardness: 400 mg/l.)
Annual operating hours: 10 hours/day x 26 days/month x 5 months = 1,300 hours
VKM50/80/100GA(M)V1
4-14 x 40 oval holeHanger bracket
Supply air to room
SA
Return air from room
RA
(For humidifier) *1Maintenance cover
(Natural evaporative type) *1Humidifier
Solenoid valve *1
EA
(Outdoor air)Fresh air from outdoors
Exhaust air to outdoors
OA
Control box
Maintenance Cover
Mo
re t
han
600
hatchInspection
hatchInspection
the air filters, fans (and humidifier)Maintenance space for the heat exchanger elements
140 (In case of 600 inspection hatch)360 (In case of 450 inspection hatch)
High efficiency filter (option)
Liquid pipe connectionAir filters
(PT3/4 male screw)
(ø12.7)
(ø6.4)
connectionGas pipe
Heat exchanger elements
Drain outlet
(ø6.4C1220T)Feed water connection port *1
of the heat exchanger elements.Note *1. VKM50/80/100GAMV1 only.
The high efficiency filter (option) can be attached to the SA surface*( 450 or 600) at the service side of filters and elements.Be sure to provide two inspection hatches.*The specifications are subject to change without notice.*
210
B
42
Supply air fan
160
250
150–
153
C
Damper plate
210
G
K
1688387
235
60
10I
20
153 F
Feed water tank *1
D
130
E
160
144
A
28
102
Direct expansion coil
34
H
J
322
20
1764515
Exhaust air fan
94
Notes: 1. Installation box is necessary for each adaptor marked . 2. Up to 2 adaptors can be fixed for each installation box.3. Only one installation box can be installed for each indoor unit.4. Up to 2 installation boxes can be installed for each indoor unit.5. It is order production.
*1 Necessary when operating a Heat Reclaim Ventilator (VKM) independently. When operating interlocked with other air conditioners, use the remote controllers of the air conditioners.
*2 For residential use only. When connected with a Heat Reclaim Ventilator (VKM), you can only switch the power ON/OFF, it cannot be used with other central control equipment.
VKM50GA(M)V1 VKM80/100GA(M)V1832A 1,214248B 439431C 622164D 183420E 592248F 439878G 1,262137H 89137I 89
196J 246 250K 263
Air suction/Discharge grille
185 186
Air
Tre
atm
ent
Equ
ipm
ent
Air Treatment Equipment
Air Treatment Equipment
The heat reclaim ventilator creates a high-quality environment by interlocking with the air conditioner
Air conditioning load reduced by approximately 31%!
Nighttime free cooling operation*1
Compact Equipment
With a height of only 306 mm, the unit easily fits into limited spaces, such as above ceilings.
Total heat exchange ventilation
This unit recovers heat energy lost through ventilation and curbs room temperature changes caused by ventilation, thereby conserving energy and reducing the load on the air conditioning system.
Auto-ventilation ModeChangeover Switching
Automatically switches the ventilation mode (Total Heat Exchange Mode/Bypass Mode) according to the operating status of the air conditioner.
Pre-cool, Pre-heat Control
Reduces air conditioning load by not operating the Heat Reclaim Ventilator while air is still clean soon after the air conditioner is turned ON.
Enthalpy efficiency drastically improved by employing thin film element! (VAM-GJ model)
• Moisture resistance of the partition sheets is decreased drastically.• There is more space for extra layers in the element, result in increasing of
effective area that supply and exhaust air can be exposed to.
Energy Conservation
Air conditioning load reduced by approximately 31%!
Cold Climate Compatible
Standard operation at temperatures down to -15°C.
This VAM series provides higher enthalpy efficiency *1, due to the greatly enhanced performance of the thin film element. Furthermore, improved external static pressure *2 offers more flexibility for installation. Along with these three outstanding improvements, the nighttime free cooling operation contributes to energy conservation and more comfortable environment.
Nighttime free cooling operation is an energy-conserving function that works at night when air conditioners are off. By ventilating rooms containing office equipment that raises the room temperature, nighttime free cooling operation reduces the cooling load when air conditioners are turned on in the morning. It also alleviates feelings of discomfort in the morning caused by heat accumulated during the night.
Model Names
VAM150GJVEVAM500GJVEVAM1000GJVE
VAM250GJVEVAM650GJVEVAM1500GJVE
VAM350GJVEVAM800GJVEVAM2000GJVE
Daikin air conditionerIndoor unit
LCD remote controllerfor indoor unit
• Operating mode signal • Filter cleaning signal • Failure detection signal
• ON/OFF signal• Cooling/Heating mode signal• Set temperature signal• Ventilation signal
Heat Reclaim Ventilator
OA(Fresh air fromoutdoors)
SA(Supply air to room)
EA(Exhaust air to outdoors) RA
(Return airfrom room)
InterlockingInterlocking
306 mm* For VAM500GJVE -20 -10 0 10 20 30 40 50
50˚CDB-15˚CDB 50˚CDB-15˚CDB
Moisture absorption increased by approx. 10%!
With the thinner film...
23%
Molecule of waterMiscellaneous gas, CO2 molecule, etc.
Sheet structureOutdoor
Exhaust air
SA
Indoor
RA(uncleanindoor air)
Outdoor air (fresh air)
Moisture exchange efficiency is greatly improved by using optimised thinner films and moisture-absorption materials in the element. Furthermore, miscellaneous gas barrier properties are maintained by decreasing the porosity in the moisture-absorption materials.
High-humidity air
Low-humidity air
Precise, thin-filmmaterial
Exhaust air
Supply air
6%
2%
VAM-GJIndividual operation
Normalventilation fan
VAM-GJInterlocked operationwith air conditioner
20%
0%
Air Conditioning Load31%
Exhaustheat
Exhaustheat
The indoor accumulated heat is discharged at night.This reduces the air conditioning load the next day thereby increasing efficiency.
Indoorunit
Indoorunit
Cold air
Generatedheat
Heat is discharged. The load is small so the temperature is rapidly reducedto a comfortable level.*Interlocked operation with an air conditioner
Comfortable!Comfortable!
40 m
Heat Reclaim Ventilator remote controller*BRC301B61 (Option)
* This remote controller is used in case of independent operation of Heat Reclaim Ventilator.
*1 For models: VAM150/250/350/650/800/1000/2000GJVE*2 For models: VAM150/350/500GJVE
Improved Enthalpy Efficiency *1
Higher External Static Pressure *2
Enhanced Energy Saving Functions
40 µm
Thickness ofthe partition sheet
5%*2!
Air conditioning sensibleheat load reduced by
approx.
• The air conditioning load reduction values may vary according to weather and other environmental conditions at the location of the machine's installation.
• The air conditioning load reduction values are based on the following conditions:
Application: Tokyo office buildingBuilding form: 6 floors above ground, 2 floors underground, floor area 2,100 m2
Personnel density: 0.25 person/m2
Ventilation volume: 25 m3/hIndoor air conditioning level: summer 25°C 50% RH, intermediate seasons 24°C
50% RH, winter 22°C 40% RHOperating time: 2745 hours (9 hours per day, approx. 25 days per month)Calculation method: simulation based on "MICRO-HASP/1982" of the Japan
Building Mechanical and Electrical Engineers Association.
• Nighttime free cooling operation only works to cool and if connected to Building Multi or VRV systems.
• Nighttime free cooling operation is set to “off” in the factory settings, so if there is a need to turn on, please contact Daikin dealer.
*1 This function can be operated only when interlocked with air conditioners.
*2 Value is based on the following conditions:• Cooling operation performed from April to October.• Calculated for air conditioning sensible heat load only (latent heat load
not included).
Air conditioning load reduction (%)
Heat Reclaim Ventilator (VAM Series)
Reduced by Approximately
187 188
Air
Tre
atm
ent
Equ
ipm
ent
Air Treatment Equipment
Air Treatment Equipment
CO2 sensor optional kit connection Specifications
The CO2 sensor controls airflow so that it best matches the changes in CO2 level.This prevents energy losses from over-ventilation while maintaining indoor air quality with optional CO2 sensor.
9 10 11 12 13 14 15 16 17 18 19 20 21 Hours
Heat Reclaim Ventilator
Air conditioner
Airflow for ventilation
Energy wastage for ventilation is reduced.Air conditioning load for ventilation is reduced.
CO2 level
Referencevalue
CO
2 le
vel
Airfl
ow f
or v
entil
atio
n
If airflow were constant
Airflow up
Airflow up
Airflow up
7- stage control with different airflow levels
indicates energy savings!
Many people increase CO2 level:
Airflow down
Fewer people decrease CO2 level:
Overtimework
Morningmeetings
Salespersonnel leave
office
Salespersonnel
return
Lunchtime
Airflow down
Airflow down
Example of CO2 sensor operation in an office room:
VAM150GJVE VAM250GJVE VAM350GJVE VAM500GJVE
84/85 79/79
79/79 75/75
79/79 75/75
79/79 74/74
79/79 74/74
75/75 72/72
75/75 72/72
78/78 72/72
78/78 72/72
77/77
77/77
82/82 80/80.5
1-phase, 220-240 V/ 220 V, 50/60 Hz
VAM650GJVE VAM800GJVE VAM1000GJVE VAM1500GJVE
77/77.5 74/74.5 80.5/81 75.5/76
VAM2000GJVE
79/81
MODEL
Temp. Exchange Efficiency(50/60 Hz)
Ultra-High
High
Enthalpy ExchangeEfficiency(50/60 Hz)
Low
%
For Cooling
Ultra-High
High
Low
%
Power Supply
27-28.5/28.5 27-29/29 31.5-33/33 33-35.5/34
26-27.5/27.5 26-27.5/28 30-31.5/30 31.5-34/32
20.5-21.5/21 21-22/21 23-25/23 25-28.5/24
28.5-29.5/29.5 28.5-30.5/30.5 33-34.5/34.5 34.5-36/35.5
27.5-28.5/28.5 27.5-29/29.5 31.5-33/31.5 33-34.5/33.5
22.5-23.5/22
Galvanised steel plate
22.5-23/22.5 24.5-26.5/24.5 25.5-28.5/25.5
150/150 250/250 350/350 500/500
150/150 250/250 350/350 500/500
100/95 155/155 230/230 320/295
278 × 810 × 551 306 × 879 × 800
24 32
Self-extinguishable polyurethane foam
Air to air cross flow total heat (Sensible heat+latent heat) exchange
Specially processed nonflammable paper
Multidirectional fibrous fleeces
Sirocco fan
0.030 × 2 0.090 × 2
100 150 200
-15°C–50°CDB, 80%RH or less
120/154 70/96 169/222 105/150
106/131 54/65 141/145 66/52
56/60 24/20 67/30 32/18
34-36/36 39-40.5/39.5 39.5-41.5/39.5 39.5-41.5/41.5
33-34.5/34 37-39.5/37.5 37.5-39.5/37.5 37.5-39.5/39.5
27.5-29.5/28 35-37.5/34 35-37.5/34.5 35-37.5/36
35-37.5/37.5 40.5-42/41 40.5-42.5/40.5 41-43/42.5
33-35.5/35.5 38.5-40/39 38.5-40.5/38.5 39.5-41/41.5
27.5-30.5/29.5 36-38.5/35.5 36-38.5/35.5 36.5-38/37.5
650/650 800/800 1,000/1,000 1,500/1,500
650/650 800/800 1,000/1,000 1,500/1,500
500/470 700/670 860/840 1,320/1,260
387×1,111×1,214387×1,111×832338×973×832
45 55 67
785×1,619×832 785×1,619×1,214
129
0.140 × 2 0.280 × 2 0.280 × 4
250 350
85/125 133/170 168/192 112/150
53/67 92/85 110/86 73/72
35/38 72/61 85/60 56/50
41.5-43.5/42
39-43/40
36-39/39
43-45.5/44
40.5-45/42
37.5-39.5/41
2,000/2,000
2,000/2,000
1,720/1,580
157
116/140
58/32
45/45
Fan
HeatExchangeMode
Sound Level(50/60 Hz)
BypassMode
Ultra-High
High
Low
Ultra-High
High
Low
dB(A)
dB(A)
Ultra-High
High
Low
mm
kg
Casing
Insulation Material
Heat Exchange System
Heat Exchange Element Material
Air Filter
Type
Dimensions (H × W × D)
Machine Weight
kW
mm
Unit ambient condition
Motor Output
Connection Duct Diameter
Airflow Rate(50/60 Hz)
Ultra-High
High
Low
m3/h
PaExternal Static Pressure(50/60 Hz)
125/134 137/141 200/226 248/270
111/117 120/125 182/211 225/217
57/58 60/59 122/120 128/136
125/134 137/141 200/226 248/270
111/117 120/125 182/211 225/217
57/58 60/59 122/120 128/136
342/398 599/680 635/760 1,145/1,300
300/332 517/597 567/648 991/1,144
196/207 435/483 476/512 835/927
342/398 599/680 635/760 1,145/1,300
300/332 517/597 567/648 991/1,144
196/207 435/483 476/512 835/927
1,289/1,542
1,151/1,315
966/1,039
1,289/1,542
1,151/1,315
966/1,039
HeatExchangeModePower
Consumption (50/60 Hz)
BypassMode
Ultra-High
High
Low
Ultra-High
High
Low
W
W
For Heating
Ultra-High
High
Low
%
Notes: 1. Sound level is measured at 1.5m below the centre of the body. 2. Airflow rate can be changed over to Low mode or High mode.3. Sound level is measured in an anechoic chamber.
Sound level generally becomes greater than this value depending on the operating conditions, reflected sound, and peripheral noise.
4. The sound level at the air discharge port is about 8 dB(A) higher than the unit's sound level.
5. The specifications, designs and information given here are subject to change without notice.
6. Temperature Exchange Efficiency is the mean value between cooling and heating.
7. Efficiency is measured under the following conditions: Ratio of rated external static pressure has been maintained as follows; outdoor side to indoor side = 7 to 1.
8. In conformance with JIS standards (JIS B 8628), operating sound level is based on the value when one unit is operated, with the value converted for an anechoic chamber. This is transmission sound from the main unit, and does not include sound from the discharge grille. Thus it is normal for the sound to be louder than the indicated value when the unit is actually installed.
9. Sound level from the discharge port causes the value to be approximately 8 dB(A) (models with the airflow rate of less than 150 to 500m³/h) to approximately 11 dB(A) (models with the airflow rate of 650m³/h or more) greater than the indicated value. Furthermore, fan rotation and noise from the discharge grille may increase depending on the on-site duct resistance conditions. Please consider noise countermeasures when installing the unit.
10. With large models in particular (1500 and 2000m³/h models), if the supply air (SA) grille is installed near the main unit, the noise of the main unit may be heard from the discharge grille via the duct, and this will result in a marked increase in noise. In such cases, if peripheral effects are included (such as reverberation of the floor and walls, combination with other equipment, and background noise), sound level may be as much as 15 dB(A) higher than the indicated value. When installing a large model, please provide as much separation as possible between the main unit and the discharge grille. If the equipment and discharge grille are near each other, please consider countermeasures such as the following:• Use a sound-muffling box, flexible duct and sound-muffling air supply/discharge
grilles• Decentralised installation of discharge grilles
11. When installing in a location with particularly low background noise such as a classroom, please consider the following measures to avoid transmission sound from the main unit:• Use of ceiling materials with high sound insulating properties (high transmission
loss)• Methods of blocking sound transmission, for example, by adding sound insulating
materials around the bottom of the sound source. Alternatively, consider supplementary methods such as installing the equipment in adifferent location (corridor, etc.)
66/66 63/63 66/66 55/55
66/66 63/63 66/66 55/55
70/70.5 66/66 70/70 59/59.5
61/61 61/61 64/64 61/61
61/61 61/61 64/64 61/61
64/64.5 64/64.5 68.5/69 64/64.5
62/62
62/62
66/67
72/72 71/71 70/70 67/67
72/72 71/71 70/70 67/67
76/76.5 74/74 77/77 74/74.5
67.5/67.5 65/65 70/70 65/65
67.5/67.5 65/65 70/70 65/65
71.5/72 67.5/68 72.5/73 67/67.5
72/72
72/72
76/76
Heat Reclaim Ventilator (VAM Series)
189 190
Air
Tre
atm
ent
Equ
ipm
ent
Air Treatment Equipment
Front FilterHighly Efficient Filter
Air Treatment Equipment
Options PM2.5 filtration unit (Option) for VAM / FXMQ-MF series
Rapid urbanization has increased industrial and automobile emissions, resulting in higher PM2.5 levels. This has become the source of respiratory diseases and poses a serious threat to a long term health issue. As the air quality has worsened, research has shown the harmful effects of PM2.5 on the health of the general public.
Air suction/discharge grille (Obtain locally)
Branch duct(Obtain locally)
SA
SA
RA
EAOA
Duct(Obtain locally)
Flexible duct(Option)
Silencer (Option)
Round hood(Obtain locally)
Thermal insulation material (Obtain locally)
High efficient filter(Option)
BRC301B61
DCS302CA61
DCS303A51*1
DCS301BA61
DST301BA61
KRP2A61
KRP50-2
BRP4A50
KRP50-2A90 (Mounted electric component assy of Heat Reclaim Ventilator)
VAM150 · 250 · 350 · 500 · 650 · 800 · 1000 · 1500 · 2000GJVE
EA
OA
RA
SA
Power supply (Obtain locally)Relay box
Thermostat (Obtain locally)(ON when the temperature is at or below -10°C)
Heat Reclaim Ventilator
Heater(Obtain locally)
BRP4A50
Thermostat (Obtain locally)(OFF when the temperature is at or more than 5°C)
Indoor Outdoor Notes when installing :•Examine fully an installation place and specification for using the electric heater based on the standard and regulation of each country.
•Supply the electric heater and safety production devices such as a relay and a thermostat, etc of which qualities satisfy the standard and regulation of each country at site.
•Use a non-inflammable connecting duct to the electric heater. Be sure to use 2 m or more between the electric heater and the Heat Reclaim Ventilator for safety.
•For the Heat Reclaim Ventilator, use a different power supply from that of the electric heater and install a circuit breaker for each.
VAM150GJVE VAM250GJVE VAM350GJVE VAM500GJVE VAM650GJVE VAM800GJVE VAM1000GJVE VAM1500GJVE VAM2000GJVE
——
KDDM24B50 KDDM24B100 KDDM24B100×2 200 250
KAF242J25M KAF242J50M KAF242J65M KAF242J80MKAF241J65M KAF241J80M
KAF242J100M KAF242J80M×2 KAF242J100M×2KAF241J25M KAF241J50M KAF241J100M KAF241J80M×2 KAF241J100M×2
K-FDS101D K-FDS151E K-FDS201E K-FDS251EK-FDS102D
BAF249A150
BAF249A150C
BAF249A300
BAF249A300C
BAF249A350
BAF249A350C
BAF249A500
BAF249A500C BAF429A20AC
—
—
K-FDS152D K-FDS202D K-FDS252E——
YDFA25A1 250
BRYMA65 BRYMA65 BRYMA100BRYMA100
*Refer to pages 191 - 192 for details.
BAF429A20A
Double-layered efficient filtration
Schematic diagram of filter surface
With the capturing effect of static electricity, particles are adsorbed on the filter fabric.
The filter is not blocked and therefore continuous Supply Air is guaranteed.
Long-lasting highly efficient dust collection capacity
The filter mesh is blocked by particles and thus ventilation effect is reduced.
Dust collection capacity decreases remarkably after use for a period of time.
Daikin Electrostatic Dust Collecting Filtration
Dust and particles covering the filter surface
PM2.5 filters are double-layered.1. The front filter effectively removes large particles.2. The PM2.5 filter layer contains a large amount of static electricity to capture particulate matter efficiently.
Electrostatic dust collection filter: more efficient and longer lasting effect
The PM2.5 filter layer contains a large amount of static electricity to capture particulate matter efficiently, including those smaller than the grid mesh.The filter is difficult to be blocked by particles and has good ventilation and long life span.
PCB adaptor for heater control kit (BRP4A50)When the installation of an electric heater is required in a cold region, this adaptor with an internal timer function eliminates the complicated timer connecting work that was necessary with conventional heaters.
Schematic diagram of filter cross-section
Option List
Notes: 1. Installation box is necessary for each adaptor marked . 2. Up to 2 adaptors can be fixed for each installation box.3. Only one installation box can be installed for each indoor unit.4. Up to 2 installation boxes can be installed for each indoor unit.5. It is order production.
*1 For residential use only. When connect with a Heat Reclaim Ventilator (VAM), you can only switch the power ON/OFF. It cannot be used with other central control equipment.
Normal Filtration
Central remote controller
Wiring adaptor for electrical appendices
Unified ON/OFF controllerSchedule timer
For humidifier
Installation box for adaptor PCB
For wiring
Type (VRV indoor unit)
For heater control kit
PCB
Ada
ptorC
ontr
ollin
g de
vice
Residential central remote controller
Heat Reclaim Ventilator remote controller
Installation box for adaptor PCB
Centralised controlling device
ItemType
Silencer
Add
ition
alfu
nctio
n
High efficiency filter
Flexible duct (1 m)
CO2 sensorPM2.5 filtration unit*PM2.5 with activated carbon filtration unit*
Flexible duct (2 m)
Air filter for replacement
ItemType
Silencer Nominal pipe mm
Nominal pipe mm
—
FXFSQ-A
KRP1H98A*2, 3
FXDQ-PDFXDQ-ND
FXLQ-MAFXNQ-MA
FXBQ-P FXBPQ-P
FXZQ-A
KRP1BB101*4
FXFQ-A FXEQ-A
— —
KRP1B61
FXCQ-A
KRP1C67
FXPQ-A
KRP1C96*2, 3
KRP4A98*2, 3
KRP4A97*2, 3
KRP4B93*2, 3
KRP4A987*2, 3, 5
FXDSQ-A FXDQ-SP FXSQ-PA FXMQ-PA
KRP1CA93*3
KRP1D93A*3
— KRP1BA97 ——
FXMQ-P FXUQ-A FXHQ-MA FXHQ-A FXAQ-A FXVQ-N
— KRP1C67KRP1C13A ——
KRP1BB101*4
191 192
Air
Tre
atm
ent
Equ
ipm
ent
Air Treatment Equipment
Air Treatment Equipment
PM2.5 filtration unit (Option) for VAM / FXMQ-MF series PM2.5 filtration unit
PM2.5 with activated carbon filtration unit
Filtering PM2.5 efficiently for healthier and more comfortable environments
Extra-high performance filter against sulfur oxides and nitrogen oxides
The PM2.5 filtering series heat reclaim ventilator is equipped with an electrostatic dust collection filter for PM2.5 removal. This filter removes 99% or more of 2.5 μm.
Effective Use of Active Carbon Material to Enlarge the Adsorption Area
As an expert in the research and development of filters, DAIKIN has specifically selected active carbon material as the main substance to constitute the filter against sulfur oxides and nitrogen oxides. The material’s usable pore surface is fully exploited, thus extending the filter’s durability.
Notes: Surface area of active carbon: 700 m2/gGiven a newspaper page of 40.6 cm wide by 54.6 cm long, each gram of active carbon has a surface area of 3,000 newspaper pages.
Intelligent Identification, Super-effective Adhesion
The special substance added in the pores of active carbon can exclusively target sulfur oxide and nitrogen oxide gases and stick to them without blocking other unidentified gases. This ensures long durability of the filter.
Note: The figures are based on in-house tests under the following lab conditions: temperature 22 to 25°CDB, humidity 35 to 40% RH, air flow rate 0.2 m/s.
Unidentified Gases
Removal RateRemoval Rate
PM2.5 electrostatic dust collection filter
*Test results by the Heating, Ventilation and Air Conditioning Lab at Tongji University Test environment: temperature 25-26°CDB, humidity 58-60%RH
Dimensions (H × W × D)
Connection Duct Diameter
BAF249A300C BAF249A350C BAF249A500C
220×603×366220×603×366 300×623×366300×623×366
BAF244A300 BAF244A500
BAF244A300C BAF244A500C
150 250 350 500
3 5 5 9
37 35 36 51
34 30 31 42
1 year
1 year
99% or higher
MODEL
Airflow Rate
PM2.5 Filter
ActivatedCarbon Filter
BAF249A150C
Initial Pressure Drop
Filter Lifetime *1
Filtration Efficiency *2
Filter Material No. *3
Initial Pressure Drop
Filter Lifetime
Filter Material No. 3
Total Initial Pressure Drop for PM2.5 with Activated Carbon Filtration Unit
Notes: 1. Annual usage: 400 hrs / month × 12 months = 4,800 hrs.2. 99% or higher removal rate of ultra-fine particles with diameters of 2.5 µm or more.3. Filters come with applicable filtration units with a one-year life. They can be purchased and replaced according to their model numbers.
Initial Pressure Drop
Filter Lifetime *1
Filtration Efficiency *2
Filter Material No. *3
m3/h
mm
mm
Pa
m3/h
mm
mm
Pa
Pa
Pa
Dimensions (H × W × D)
Connection Duct Diameter
Airflow Rate
1 year
99% or higherPM2.5 Filter
MODEL
220×603×366220×603×366 300×623×366300×623×366
BAF244A300 BAF244A500 BAF424A20A
BAF424A20A
BAF424A20AC
150 250 350 500
34 30 31 42
BAF249A300 BAF249A350 BAF249A500BAF249A150
100 150 150 200
470×971×370
2,100
less than 40
BAF429A20A
580×348
470×971×370
2,100
less than 40
580×348 100 150 150 200
BAF429A20AC
less than 10
less than 50
Adhesives
Notes: 1. Annual usage: 400 hrs/month x 12 months = 4,800 hrs2. 99% or higher removal rate of ultra-fine particles with diameters of 2.5 μm or more.3. Filters come with applicable filtration units with a one-year life. They can be purchased and replaced according to their model numbers.
193 194
Co
ntr
ol S
yste
ms
Control Systems
Control Systems
Energy savingSleek and stylish design
• Combines refinement and simplicity• Echoes the distinct blue circle and simplicity of
design • Two attractive colours to match any interior• Compact, measures only 85 x 85 mm
User-friendly interface
• Just three buttons and a large-figure display• Customisable display• Direct access to basic functions (ON/OFF,
Operation mode, Temperature setting, Airflow rate, Airflow direction)
Easy setting via Bluetooth App with smartphone (for Installer / Facility manager)
• Improved setback function by setting the lower temperature limit in cooling and higher temperature in heating mode.
Setpoint range set
• Avoids excessive cooling or heating by limiting the min. and max. set temperature.• Convenient for use at a place where any number of people may operate it.
Setpoint auto reset
• Even if the set temperature is changed, the new set temperature returns to the previous preset value after a preset duration of time.
• Period selectable from 30, 60, 90, or 120 min.
Off timer
• Period can be preset from 30 to 180 minutes in 10-minute increments.
BRC1E63 BRC1F61(Only for FXEQ and FXDSQ series)
Individual control systems for VRV systems
Keep hotel room comfortable
• Easy to create multiple remote control and field settings via App• Prepare a setting in advance at the office and immediately send it to the on-site remote controller• Save and reuse settings
Shorter installation time
Stylish remote controller (Option) Navigation remote controller (Wired remote controller) (Option)
A series of user friendly functions that can be individually selected
BRC1H61W (White)
<App screen image>
BRC1H61K (Black)
A complete redesigned controller focused to enhance user experience
Easy and direct accessto main functions
ON/OFF
Customisable example SIMPLE VIEW
Fan speed Louvre settingMode selection
(cooling, heating, fan only, etc.)
Convenience
Setback (default: OFF)
• Maintains the room temperature in a specific range during unoccupied period by temporarily starting air conditioner that was turned OFF.
Weekly schedule
• 5 actions per day can be scheduled for each day of the week.• The holiday function will disable schedule timer for the days that have been set
as holiday.• 3 independent schedules can be set. (e.g. summer, winter, mid-season)
Auto display off
• Period can be preset from 10, 30, 60 minutes, and OFF. Initial setting is 30 minutes.
Comfort
Individual airflow direction
• Airflow direction can be individually adjusted for each air discharge outlet.
5-step airflow control
• Airflow rate can be selected from 5-step control.
Auto airflow rate
• Airflow rate is automatically controlled.
195 196
Co
ntr
ol S
yste
ms
Control Systems
BRC2E61
Control Systems
Wide variation of remote controllers for VRV indoor units
• A compact signal receiver unit (separate type) to be mounted into a wall or ceiling is included.
• The wireless remote controller is supplied in a set with a signal receiver.
• Signal receiver unit of installed type is contained inside decoration panel or indoor unit.
• Shape of signal receiver unit differs according to the indoor unit.Note: The signal receiver unit shown in the photograph is for mounting inside the decoration panel of
FXF(S)Q series.
• Backlight LCD of new wireless remote controller
Compact size• Measuring only 85 x 85 mm, the new remote controller is
extremely compact and complements any interior design.
Intuitive design• By using pictograms, the user-friendly interface enables convenient
and easy operation.
Simple operationUsing only six buttons, users have direct access to basic functions. This enables them to easily set comfort to their preference.• ON/OFF • Operation mode• Temperature setting • Airflow rate (5-step & Auto)*• Up and down airflow direction (5-step & Swing)*• ON/OFF timer
The wired remote controller supports a wide range of control functions
The indoor unit can be connected by the two remote controllers, for example one in the room and the other one in the control room, which can control the operation of indoor unit freely. (The last command has a priority.) Of course, the group control by two remote controllers is also possible.
The wiring of remote controller can be extended to max. 500 m and it is possible to install the remote controllers for different indoor units in one place.
The operation of Heat Reclaim Ventilator can be controlled by the remote controller of the indoor unit. Of course, the remote controller can display the time to clean the filter.
The system can be expanded to add several controllers, such as BMS, Forced OFF input and etc.
Control by two remote controllers
•Control of Cool/Heat changeover
In all the series of VRV, Cool/Heat changeover in the same refrigerant circuit can be changed by the remote controller of the indoor unit.
Outdoor unit
Equipment related to the central control
One remote controller can control the operation of max.16 indoor units at the same time.
Indoor unit
Remote controller
Remote controller
Remote controller
Remote controller
Forced OFF input
Remote controllerRemote controller Remote
controller
Remote controller
Heat Reclaim Ventilator
•Group control
Signal receiver unit(Separate type)
BRC-C, E series* Wireless remote controller and signal receiver unit are sold as a set. * Refer to page 223 for the name of each model.
* The number of airflow steps and availability of auto airflow rate and swing mode depend on the type of indoor unit.
Navigation remote controller(BRC1E63)
Navigation remote controller(BRC1F61)
Simplified remote controller(BRC2E61)
Wireless remote controller*(Separate type signal receiver unit)
Wireless remote controller*(Installed type signal receiver unit)
*Refer to page 223 for the name of each model.
FXFQFXFSQMODEL FXZQ FXCQ FXHQFXEQ FXDQFXDSQ FXSQ FXUQFXMQ FXAQ FXL(N)Q FXVQ FXPQ FXB(P)Q
Signal receiver unit (Installed type)
BRC-M series
Easy operation with new intuitive design
1 Remote control2 Control for the combined operation3 Expansion of
system control4Pressing the backlight button helps operating in dark rooms.
Individual control systems for VRV systemsSimplified remote controller (Option)
Wireless remote controller (Option)
Stylish remote controller (BRC1H61W / BRC1H61K)
197 198
Co
ntr
ol S
yste
ms
Control Systems
Control Systems
The DIII-NET system provides for:• Close control and monitoring by integrating a wide variety of
air-conditioners in the entire building.• Saves the in-building cabling using non-polar, two-wire cables. Easier wiring
work with tremendously fewer wiring errors.• Additional setups readily up and running. An extendable cabling up to 2 km
in total.• Different control equipment flexibly joined in the system for hierarchical
risk diversification.• Daikin's total heat exchangers and other devices under integral control.
The high speed transmission of DIII-NET enables more advanced control of the VRV system, providing you with enhanced comfort.
Building Control System
(DCM601A51)
ACC Centre
Via internet
Via internet
Air Conditioning Network Service System(There are restrictions in applicable areas and release times, therefore please consult us separately for details.)(Optional Maintenance Service)
BMS(Obtain locally)
Home AutomationMaster Controller
Controllers for Centralised Control
(DCS601C51)
Residential central remote controller
(DCS303A51)
Wiring adaptorfor electrical appendices(KRP2A61/62/51/53)
Unification adaptorfor computerised control(DCS302A52)
Interface for use in BACnet®
(DMS502B51)
Interface for use in LONWORKS®
(DMS504B51)
Home AutomationInterface Adaptor(DTA116A51)
DIII-NET Line
BACnet®/Ethernet or LONWORKS®
Network Communication Line
Contact Signal Line
RS485 Modbus® Line
D -NET(High Speed Multiple
Transmission)
DIII-NET, Daikin’s unique high speed multiple transmission system, links air conditioners and various other building equipment — in accordance with applications, scale and conditions — and transmits vast amounts of information between them.
Interface Adaptor for SkyAir Series(DTA112BA51)
Central Control Adaptor Kit(DTA107A55)
Interface Adaptor for DIII-NET use(KRP928BB2S)
Di unit (DEC101A51)Dio unit (DEC102A51) Building services equipment
• Electrical equipment• Supply water and drainage equipment• Automatic fire alarm• Parking equipment• Lift• Ventilation equipment• Lighting• Crime and fire prevention equipment
VRV
Heat Reclaim Ventilator
SkyAir
Packaged Air-conditioner
Residential Air-conditioner
* No adaptor is required for some indoor units.
Control /Connection Interface
Caution: Limitation may apply to some models and functions. Please contact your local sales office for details. Consultation is necessary before employing this control system. Please contact your local sales office before making a purchase.
Note: BACnet® is a registered trademark of American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE). LONWORKS® is a trademark of Echelon Corporation registered in the United States and other countries. Modbus® is a registered trademark of Schneider Electric S.A.
Integrated building monitoring system
VRV
199 200
Co
ntr
ol S
yste
ms
Control Systems
DemandController
(field supply)
Control Systems
One touch selection enables flexible control of equipment in a building.
For energy saving & comfort
intelligent Touch Manager maximises the advantages of VRV features
Building equipment controlVarious types of equipment other than air conditioners, including ventilators, fans, and pumps, can also be controlled.
Lighting controlDALI-compatible LED lighting systems can be controlled and monitored. Lighting control is enhanced through an interlock function with air conditioners and other functions.
Individual air-conditioning controlThe flexible control achieved by the VRV system precisely meets different air conditioning needs in each room (e.g. offices, conference rooms, hotel rooms).
Air-conditioning control for large spacesAir handling units can also be controlled. Large spaces, such as entrance halls and shopping malls, can be easily controlled to ensure comfort.
With Remote controller
With Control System
This heat is killing me.
Turn ON again by remote controller, forgot to turn OFF, and left.
Power consumption saved by control system
8:00 17:00 18:30 8:00 8:00 10:00 18:00
Stop Start
8:00
Working hours(Scheduled)
Turn off as scheduled
Automatically turn OFF to cut wasteful operation Set at 24°C Reset to 24°C
Change to 20°C
Manager room:8:00-20:00
Machine room:24 hours
Admin:8:30-17:00
Common area:9:00-17:00Meeting room:
No schedule
Office:8:00-18:00
Reception:9:00-17:00
16°C
22°C
Very cold.
Oh! Cool.
Set point range 22°C - 28°C
Why?It can not be set below this
Power consumption saved by control system
24ºC
20ºC
Pump Fan
DALI-compatibleDALI-compatible
intelligent Touch Manager is an advanced multi-zone controller that provides the most cost-effective way to control and monitor the Daikin VRV system.The 10.4" LCD touch screen is easy to use with three different screen views to include the floor plan layout view, icon view and list view and menus for system configurations. It is also easy to use with standardized remote Web Access from your PC. It can manage a total of 650 management points consisting of up to 512 Daikin indoor unit groups (up to 1024 indoor units) along with building equipment control / monitoring with Digital Inputs / Output (Di/Dio), Analog Inputs / Output (Ai/Ao) and Pulse input (Pi) optional devices.
DCM601A51
Advanced control systems for VRV systems
Various types of equipment in a building can be controlled by a single controller.
Schedule the operation time for each application. Define the setpoint range that users can change.
Turn the unit OFF if a user didn’t.
External contact demand control function
This function automatically controls outdoor and indoor unit capacity based on contact signals sent from demand controller (field supply) etc. to save power consumption during peak hours.
Reset setpoint regularly.
• You may set 3 levels that can be switched by ON/OFF signal of 3 contacts
• Control settings are pre-set for each level• Outdoor unit: I-demand function for peak power cut-off
Indoor unit: Set temperature shift, Forced thermostat OFF
3 contacts
DCM601A51
D -NET Line
Setting the I-demand function and nighttime quiet operation function is also possible.
201 202
Co
ntr
ol S
yste
ms
Control Systems
Control Systems
Simple wiring (daisy chain) enables management of LED lighting by the intelligent Touch Manager. Various air conditioning and lighting control is enabled through the interlock with occupancy sensors and illuminance sensors.
Switch-on / switch-off and illuminance are controlled based on a schedule to cut wasteful power consumption.
• Up to 5 DALI modules can be connected to a single BACnet® controller.• Up to 64 DALI LED drivers (64 addresses) can be connected to a single DALI module.• 64 DALI addresses can be freely assigned to up to 16 groups using a single DALI module.
(Each group corresponds to a management point of the intelligent Touch Manager.)• Up to 16 scenes can be set to a single DALI module.• Up to 12 sensors (occupancy, illuminance) can be connected to a single DALI module.• DALI BUS simplifies wiring and setting work by daisy chain wiring and automatic address setting.
Air conditioning and lighting for which power consumption is high can be efficiently controlled to promote energy conservation and cost reduction!
DALI BUS
LED light
DALI LED driver
LAN
Sensor(occupancy / illuminance)
DCM009A51(BACnet® Client option)
BACnet®
controller750-831
DALI module753-647
WAGO I/O system
Please contact your local sales office for details.
• Failing to switch off lights is prevented.
• Optimal illuminance reduces energy.
Lighting control achieved by the intelligent Touch Manager
[Operation]• Switch-on/switch-off operation• Illuminance (1–100%) control• Various illuminance patterns can be registered• Registered pattern can be selected from
intelligent Touch Manager
[Monitoring]• Switch-on/switch-off status monitoring• Lighting abnormality monitoring• Illuminance monitoring• DALI occupancy sensor monitoring• DALI illuminance sensor monitoring
Overview of control
OFF OFF
System
Operation durationRoom temperatureExpansion valve opening ratio
Operational informationof individual indoor units
DCM601A51 + DCM002A51*Automatic calculation oftotal power consumption ofindividual indoor units
DCM601A51 + DCM002A51*
DCM601A51
Total power consumption
Pulse
sign
al fro
m
the
kWh
met
er
Tenant A
Tenant A
Tenant B
Tenant BTenant C
Tenant C
kWh meter
HIGH
LOW
MEDIUM
The energy consumption is proportionally calculated for each indoor unit. The data can be used for energy management and calculation of air conditioning usage fees for respective tenants.
Operational information of individual indoor units are monitored, based on distribution of power consumption of outdoor units.
Daikin’s PPD keeps track of powerdistribution for each indoor unit. It performs air conditioning billing calculations quickly and automatically.
Reporting the power consumption of VRV system for each tenant (PPD* Option)
It is easy to output PPD data.PPD data is output in CSV format to a PC or USB memory device and can be freely processed and managed.
Main functions• Register tenants• Set the electricity unit price for 5 time zones• Calculate power consumption and electricity charge
for each tenant• Show aggregation results in the specified period for
each tenant• Output the results (Printout and CSV file)
SVMPC1
Internet / Ethernet
User’s PC
Tenant registration screen VRV electricity bill screen
Invoice Invoice
InvoiceHUB
Setup screen
Users can operate and check the status of VRV system from their smartphones via WiFi.It is not necessary to move where a remote controller is located with this feature.VRV system in other rooms can be operated, and their status can be checked. It is also possible to check if air conditioners in other rooms remain switched on etc., helping achieve energy saving.
The power consumption of VRV controlled by the intelligent Touch Manager can be easily managed for each tenant using a PC. The electricity bill settings facilitate billing work through easy calculation and issuance of VRV electricity bills.
VRV Indoor unit
You can control VRV system fromanywhere through WiFi
LAN cable
SVMPC2
WiFi router Smartphone
VRV Outdoor unit
Just add SVMPC2 to this system
VRV Smartphone Remote ControllerFor buildings
Up to 1024 indoor units can be controlled.
Case 1
Occupancy sensors are used to eliminate both wasteful lighting and air conditioning.When a room is unoccupied, the air conditioning stops and the lighting is switched off.
Case 2
Lighting abnormalities (e.g. burned-out bulbs) can be checked on the intelligent Touch Manager screen.
Case 3
Lighting maintenance becomes easier and quicker.
The layout screen enables quickidentification of specific locations.
With the PPD function, power consumption can be calculated for each indoor unit (Option)
Connection to DALI-compatible lighting control system
Effective service functions offered to tenantsSmartphone will be a remote controller of VRV system (Option)
Air conditioning bills can be issued by one click (PPD* Option)Electricity bills can be easily calculated for each tenant (Option)
*PPD (Power Proportional Distribution) is Daikin’s proprietary calculation method.
*PPD (Power Proportional Distribution) is Daikin’s proprietary calculation method.
Lighting control (Option)In addition to switching lights on and off, advanced lighting control, such as illuminance adjustment, can be achieved
Tenant management
Easy maintenance and energy saving by lighting control
DALI-compatibleDALI-compatible
203 204
Co
ntr
ol S
yste
ms
Control Systems
Control Systems
Connect VRV system to your BMS via BACnet® or LONWORKS®
Compatible with BACnet® and LONWORKS®, the two leading open network communication protocols, Daikin offers interfaces that provide a seamless connection between VRV system and your BMS.
Preventive maintenance
The intelligent Touch Manager can be connected to Daikin’s own Air Conditioning Network Service System for remote monitoring and verification of operation status for VRV system. By its ability to predict malfunctions, this service provides customers with additional peace of mind.
Enhanced convenience with link to the Air Conditioning Network Service System
The intelligent Touch Manager connects seamlessly to Daikin’s 24-hour Air Conditioning Network Service System.
Ease of use and expanded control functions
The user-friendly controller features colours, multilingual function, and icons in the display for ease of understanding. A wide variety of control methods can be accommodated, permitting administrators to monitor and operate the system even when they are away from the controller.
Air Conditioning Network Service System*
ACC centrePersonnel at the centre monitor the occurrence of malfunctions and track their cause via the Internet.Advance malfunction warnings help prevent the sudden occurrence of problems later.
Enable prompt repairs as service engineers know the cause of the problem beforehand.
Trouble
Even malfunctions difficult to identify can be monitored remotely.
Seamless connection between VRV system and BACnet® open network protocol.
Facilitating the network integration of VRV systemand LONWORKS®
BACnet® LONWORKS®
Convenient controllers that offer more freedom to administrators
DCS601C51
RepairAllows dispatching of service engineers without a call from customers.
*Because of restrictions in applicable areas and release times, please consult a Daikin representative separately for details.
Dedicated interfaces make Daikin air conditioners freely compatible with open networks
Monitor Control
VRV Indoor unit
You can control VRV system from anywhere in your house through WiFi
LAN cable
SVMPR2
WiFi router Smartphone
Just add SVMPR2 to this system
For house
Up to 64 indoor units can be controlled.
VRV Smartphone Control System
VRVOutdoor unit
Pump Fan Sensor Keycard switch
Web Access via Internet
Web Access via LAN
Web Access via LAN
100Mbps Ethernet
Fire alarm
Di/Pi port
kWh meter WAGO I/O up to 30 nodes
Up to 512 groups (1024 indoor units)
Max. 64 indoor unit groups
One D -NET systemMax. 64 indoor unit groups (128 indoor units)
Max. 64 indoor unit groups
Max. 64 indoor unit groups
DALI BUS
USB Flash drive
iTM Plus Adaptor
Up to 7 Adaptors
Up to 650 management points
Di/Pi Line
BACnet® / IP
3rd party BACnet® controller
DALI module753-647
Air Handling Unit
Air Conditioning Network Service System
KRP928BB2S
Residential A/C
WAGO I/O system
BACnet® controller750-831
LED light
DALI LED driverSensor(occupancy / illuminance)
DALI BUS
LED light
DALI LED driver
DALI BUS
LED light
DALI LED driverSVMPC1
or
SVMPR2: for controlling 64 units orSVMPC2: for controlling 1024 units
Smartphone
WiFi router
Operation from a smartphone
Tenant billing
Sensor(occupancy / illuminance)
Sensor(occupancy / illuminance)
Smartphone will be a remote controller of VRV system (Option)
Daikin offers a variety of control s ystems
Air conditioning network service system
Notes: 1. BACnet® is a registered trademark of American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE).
2. LONWORKS® is a trademark of Echelon Corporation registered in the United States and other countries.
DMS504B51 (Interface for use in LONWORKS®)DMS502B51 (Interface for use in BACnet®)
intelligent Touch Manager system overview
205 206
Co
ntr
ol S
yste
ms
Control Systems
Function
Monitoring
Operation
All site information show on a MSM screen.Connection status, A/C operation status, Error status, Energy consumption etc.
All SVMPC1 function can use on MSM screen.
Control Systems
The VRV system can be operated from the home automation system. VRV tablet and smartphone controller: SVMPC1
Multi site management system by using SVMPC1: MSMPN1
• SVMPC1 is easy to install. Just add DTA116A51 to outdoor unit and connect it to controller.
• Thanks to user-friendly screen, anyone can operate easily.
• Set point range limitation and setback function achieve energy saving and comfortable air-conditioning.
• Daily air-conditioning operation is automatically done by schedule function with annual calendar.
• Quick notification of malfunction by e-mail to support quick maintenance.
The SVMPC1 is easy to install, and enables monitoring and operation of VRV systems via tablets and smartphones. It is optimal for centralized management of VRV systems in small buildings or on individual floors of a building.
VRV Smartphone Control System can be realized by SVMPR1 which is a new product to utilize DTA116A51.
VRV Smartphone Control System
DTA116A51*One adaptor requires for a house
Home AutomationMaster Controller
MonitorOn/Off
Operation mode
Setpoint
Room temperature
Fan direction
Fan volume
Forced off status
Error
Filter sign
Communication status
On/Off status of indoor unitsCooling, Heating, Fan, Dry, Auto (depend on indoor unit capability)Setpoint of indoor units Suction temperature of indoor unitsSwing, Flap direction (depend on indoor unit capability)L, M, H (depend on indoor unit capability)Forced off status of indoor unitsMalfunction, Warning with Error codeFilter sign of indoor unitsCommunication normal/error of indoor units
Control
Retrieve system information
Connected indoor units
Indoor unit capabilities
D -NET address of connected indoor units can be retrieved.Indoor unit capabilities such as operation mode, fan control, setpoint HV can be retrieved.
Up to 16 indoor units can be individually controlled.
VRV Outdoor unit
Up to 2 units can be connected
VRV Indoor unit
Television
Lighting equipment
Electric curtains
Other Home Appliances
Simple installation
RS485 Modbus® Protocol
Wire length is up to 500 m
The VRV outdoor unit and home automation system can be connected simply by using this dedicated adaptor.
Compatible with an existing unit.
Use of Modbus® protocol
On/Off
Operation mode
Setpoint
Fan direction
Fan volume
Filter sign reset
On/Off control of indoor unitsCooling, Heating, Fan, Dry, Auto (depend on indoor unit capability)Cooling/Heating setpointSwing, Stop, Flap direction (depend on indoor unit capability)L, M, H (depend on indoor unit capability)Reset filter sign of indoor units
* Modbus® is a registered trademark of Schneider Electric S.A.
Just addSVMPR1
VRV Outdoor unit
VRV Indoor unit
DTA116A51
Smartphone Monitor ControlWiFi router
LAN cable
SVMPR1
Functions Functions
Specifications
VRV Outdoor unit
VRV Indoor unit
VRV Indoor unit
Up to 64 indoor units can be controlled.
DTA116A51WiFi router
SVMPC1
Internet
VRV Outdoor unit
You can control VRV system from anywhere through WiFi
It is easy to check if units have not been switched off, etc.
* Only admin user can set.
Category Function Detail
Main screen Status monitoring On/Off, Setpoint, Operation mode, Fan step, Flap, Error, Error code, Room TemperatureManual operation On/Off, Setpoint, Operation mode, Fan step, Flap, Scene Control
Automatic control
Setpoint range limitation* Cool setpoint min/max, Heat setpoint min/maxOff timer* Off timer on/off, Off timer duration (5min – 12h, every 5min)Setback operation* Setback setpoint range (Cool: 24-35°C, Heat: 10-20°C)
Schedule* Action registration: Time, On/Off, Setpoint, Operation mode, Fan step, Flap, Off timer on/off, Setback setpointCalendar setting: set by date or day of the week
Language, Password setting, User administration*, Point setting* System setting
Interlock operation depend on equipment statusInterlock
Category Detail
Connectable units
Number of indoor units
Specification
Max 64Number of DTA116A51 1
Connectable device
Max 20Device type iPad, iPhone, Android tablet, Android Phone, Windows Tablet, Windows Phone, Windows PC, MacWeb browser Firefox, Chrome, Safari
SiteHeadquarters
WiFi router
MSMPN1
Internet
VRV Outdoor unit
VRV Indoor unit
DTA116A51
WiFi router
SVMPC1
Site
The MSMPN1 enables monitoring and operation of all VRV system connected via SVMPC1 on each site.
Home automation interface adaptor
Image to use home automation interface adaptor DTA116A51
Simple and easy smart control
*A separate power supply for Home Automation Interface Adaptor is necessary. It may not be installed inside some outdoor unit models.
You can control VRV from anywhere in your house through WiFi
Number of Tablet/Smartphone
207 208
Prec
isio
n P
ipin
g M
eth
od
Precision Piping Method
Pipes can be joined easily & quickly without brazing and any special tools.
Innovative problem solving for VRV refrigerant piping installation
Precision Piping Method
Non-brazing / Save installation time A smarter way to connect refrigerant piping
Easy piping installation that anyone
can do
Reliabilityimprovement
Faster work with simplified installation
using basic tools
Installationimprovement
Flameless installationwithout welding for safe,
worry-free work
Safetyimprovement
Packaged Refnet Headers
HEADER PACK
Fire free connection for piping
Daikin Gas Tight JointSafe connection without a flame (in brazing work)
Time saver with easy fitting installation
Less labour intensive
Daikin Gas Tight Joint
Time Saver using Quick Flare Nut Connection
Space Saving with Compact Design
Connects up to 4 and 6 indoor units
HEADER PACK
209 210
Prec
isio
n P
ipin
g M
eth
od
Precision Piping Method
Easy piping connection / Easy installation
Easy installation
No need for brazing tools or installation skills Quick piping anyone can do with two spanners
Excellent sealing mechanism
Precision Piping Method
Suitable luxions residence Evolutionally advanced feature
580Suspension bolt Pitch
W
D
BHF6ARHP6Z,BHF8/10/16RHP6Z
Connect by Daikin Gas Tight Joint or flare
Quick flare nut connection
Easy installation
517
W
D
Suspension bolt Pitch
• Installation time saving 1/3 of conventional• Easy to install No brazing work• Safety No fire in the building• Space saving Low silhouette only 14 cm height
HEADER PACK Lineup
Refnet joint ×5
HEADER PACK
DAIKIN Gas Tight Joint HEADER PACK
1 2 3 4 5 6Brazing
IDU
1 2 3 4 5IDU6
Flare
4 port type 6 port type
Dimensions (Top view)BHF6RHP6Z
HP(VRV System)
Indoor unit totalcapacity indexModel name
Outdoor unit side
Liquid / Gas (mm)
9.5 / 15.9
(Flare)
9.5 / 15.9
(Flare)
9.5 / 19.1
(Daikin Gas Tight Joint)
9.5 / 22.2
(Daikin Gas Tight Joint)
12.7 / 28.6
(Daikin Gas Tight Joint)
Indoor unit side (Flare)
Port
Dimension (mm)
H D WLiquid / Gas (mm)
Large ×1
Small ×3
Large ×2
Small ×4
Large ×3
Small ×3
Large ×3
Small ×3
Large ×3
Small ×3
9.5 / 15.9
6.4 / 12.7
9.5 / 15.9
6.4 / 12.7
9.5 / 15.9
6.4 / 12.7
9.5 / 15.9
6.4 / 12.7
9.5 / 15.9
6.4 / 12.7
150
150
200
290
420
135
135
135
135
135
4
6
6
6
6
143
143
143
143
143
559
623
623
623
623
BHF6RHP6Z
BHF6ARHP6Z
BHF8RHP6Z
BHF10RHP6Z
BHF16RHP6Z
Reduction of connection points by elimination of refnet joints
6
6
6 · 8
10
12 · 14 · 16
• Connectable up to 4 & 6 IDU
Susp
ensi
on
bo
lt P
itch
178
Susp
ensi
on
bo
lt P
itch
178
Matching for various piping sizes
Asymmetry joints (Connecting different size pipes)
Standard joints (Connecting the same pipes)
6.4
9.5
19.0
22.0
46.2
51.4
106
139
L
AF1
ND
1
ND
2
AF2
Weight / PC(g)
Dimension(mm)
ND AF LFigure
Figure MODEL
BDGTA1209
BDGTA1512
BDGTA2219
BDGTA2825
Weight / PC(g)
Dimension(mm)
ND1 ND2 AF1 L
BDGTA06
BDGTA09
MODEL
BDGTA12
BDGTA15
BDGTA19
BDGTA22
BDGTA28
BDGTA34
BDGTA41
12.7
15.9
19.1
22.2
28.6
34.9
41.3
23.8
29.7
35.0
38.0
45.0
51.1
58.3
82.3
82.8
85.5
93.5
99.5
101.5
103.5
170
236
327
401
546
686
881
12.7
15.9
22.2
28.6
24.0
29.7
38.0
45.0
AF2
22.0
23.8
35.0
41.8
62.4
83.2
87.4
94.4
158
220
362
510
Double sealingProof pressure 4.3 MPa (-45°C through +130°C)
Leverage methodThe pull-out resistance is more than 4 times (17.2 MPa)
Authorised standards
ISO 14903
Certification of international standards Proof of safety and reliability
SGBP (Singapore Green Building Council)
• Certificate Number SGBP 2019-2405• Green Mark compatible products
9.5
12.7
19.1
25.4
L
AF
ND
L
AF
ND
HEADER PACK Daikin Gas Tight JointSimple & Quick!
211 212
Op
tio
n L
ist
Option List
Option List
Outdoor units
Distributivepiping
REFNET joint
REFNET headerKHRP26M22H, KHRP26M33H
(Max. 4 branch) (Max. 8 branch)
KHRP26A22T, KHRP26A33T
RXQ18AM(W)RXQ20AM(W)RXQ22AM(W)
RXQ18A(W)RXQ20A(W)
RXQ6A(W)RXQ8A(W)RXQ10A(W)
Type
Item
No.
1
Outdoor unit multi connection piping kit2
KHRP26M22H, KHRP26M33H, KHRP26M72H(Max. 4 branch) (Max. 8 branch) (Max. 8 branch)
KHRP26A22T, KHRP26A33T, KHRP26A72T— BHFP22P100
Distributivepiping
REFNET joint
REFNET headerKHRP26M22H, KHRP26M33H, KHRP26M72H, KHRP26M73H
(Max. 4 branch) (Max. 8 branch) (Max. 8 branch) (Max. 8 branch)
KHRP26A22T, KHRP26A33T, KHRP26A72T, KHRP26A73T
Type
Item
No.
1
BHFP22P100 BHFP22P151Outdoor unit multi connection piping kit3
KHRP26M73TP, KHRP26M73HPPipe size reducer2
RXQ12A(W)RXQ14A(W)RXQ16A(W)
RXQ26AM(W)RXQ28AM(W)RXQ30AM(W)
RXQ18AM(W)RXQ20AM(W)RXQ22AM(W)RXQ24AM(W)
RXQ6A(W)RXQ8A(W)RXQ10A(W)RXQ12A(W)
Type
Item
No.
DIII-NET expander adaptor1 DTA109A51External control adaptor2 DTA104A61Home Automation Interface Adaptor3 DTA116A51Option plate for control adaptor4 BKS26A*1— BKS26A*1—
DIII-NET expander adaptor1 DTA109A51External control adaptor2 DTA104A61Home Automation Interface Adaptor3 DTA116A51Option plate for control adaptor4 BKS26A *1
Type
Item
No.
RXQ14A(W)RXQ16A(W)RXQ18A(W)RXQ20A(W)
Option PCB
RXQ24AM(W)RXQ26AM(W)RXQ28AM(W)RXQ30AM(W)RXQ32AM(W)
RXQ34AM(W)RXQ36AM(W)RXQ38AM(W)RXQ40AM(W)
RXQ42AM(W)RXQ44AM(W)RXQ46AM(W)RXQ48AM(W)RXQ50AM(W)
RXQ52AM(W)RXQ54AM(W)RXQ56AM(W)RXQ58AM(W)RXQ60AM(W)
RXQ32AM(W)RXQ34AM(W)RXQ36AM(W)RXQ38AM(W)
RXQ40AM(W)RXQ42AM(W)RXQ44AM(W)RXQ46AM(W)
RXQ48AM(W)RXQ50AM(W)RXQ52AM(W)RXQ54AM(W)
RXQ56AM(W)RXQ58AM(W)RXQ60AM(W)
Note: *1. This plate is necessary for each adaptor marked .
RXUQ22AM(W)RXUQ24AM(W)RXUQ26AM(W)RXUQ28AM(W)RXUQ30AM(W)
RXUQ18AM(W)RXUQ20AM(W)
RXUQ6A(W)RXUQ8A(W)
Type
Item
No.
DIII-NET expander adaptor1 DTA109A51External control adaptor2 DTA104A61Home Automation Interface Adaptor3 DTA116A51Option plate for control adaptor4 BKS26A*1— BKS26A*1—
DIII-NET expander adaptor1 DTA109A51External control adaptor2 DTA104A61Home Automation Interface Adaptor3 DTA116A51Option plate for control adaptor4 BKS26A*1
Type
Item
No.
RXUQ10A(W)RXUQ12A(W)RXUQ14A(W)RXUQ16A(W)RXUQ18A(W)RXUQ20A(W)
Option PCB
RXUQ32AM(W)RXUQ34AM(W)RXUQ36AM(W)RXUQ38AM(W)RXUQ40AM(W)
RXUQ42AM(W)RXUQ44AM(W)RXUQ46AM(W)RXUQ48AM(W)RXUQ50AM(W)
RXUQ52AM(W)RXUQ54AM(W)RXUQ56AM(W)RXUQ58AM(W)RXUQ60AM(W)
Note: *1. This plate is necessary for each adaptor marked .
Distributivepiping
REFNET joint
REFNET headerKHRP26M22H, KHRP26M33H
(Max. 4 branch) (Max. 8 branch)
KHRP26A22T, KHRP26A33T
RXUQ12AM(W)RXUQ14AM(W)RXUQ16AM(W)RXUQ18AM(W)RXUQ20AM(W)
RXUQ18AM1(W)RXUQ20AM1(W)RXUQ22AM(W)
RXUQ12A(W)RXUQ14A(W)RXUQ16A(W)RXUQ18A(W)RXUQ20A(W)
RXUQ6A(W)RXUQ8A(W)RXUQ10A(W)
Type
Item
No.
1
Outdoor unit multi connection piping kit2
KHRP26M22H, KHRP26M33H, KHRP26M72H(Max. 4 branch) (Max. 8 branch) (Max. 8 branch)
KHRP26A22T, KHRP26A33T, KHRP26A72T— BHFP22P100
Distributivepiping
REFNET joint
REFNET headerKHRP26M22H, KHRP26M33H, KHRP26M72H, KHRP26M73H
(Max. 4 branch) (Max. 8 branch) (Max. 8 branch) (Max. 8 branch)
KHRP26A22T, KHRP26A33T, KHRP26A72T, KHRP26A73T
Type
Item
No.
1
BHFP22P100 BHFP22P151Outdoor unit multi connection piping kit3
KHRP26M73TP, KHRP26M73HPPipe size reducer2
RXUQ24AM(W)RXUQ26AM(W)RXUQ28AM(W)RXUQ30AM(W)RXUQ32AM(W)
RXUQ34AM(W)RXUQ36AM(W)RXUQ38AM(W)RXUQ40AM(W)
RXUQ42AM(W)RXUQ44AM(W)RXUQ46AM(W)RXUQ48AM(W)RXUQ50AM(W)
RXUQ52AM(W)RXUQ54AM(W)RXUQ56AM(W)RXUQ58AM(W)RXUQ60AM(W)
RXUQ12AM(W)RXUQ14AM(W)RXUQ16AM(W)RXUQ18AM1(W)RXUQ20AM1(W)
REFNET joint(KHRP26A22/33/72/73T)
REFNET joint(KHRP26A22/33/72/73T)
213 214
Op
tio
n L
ist
Option List
Note: *1. This plate is necessary for each adaptor marked .
Option List
Outdoor units
KHRP26M22H, KHRP26M33H, KHRP26M72H(Max. 4 branch) (Max. 8 branch) (Max. 8 branch)
KHRP26A22T, KHRP26A33T, KHRP26A72T—
RXYQ12AHRXYQ14AHRXYQ16AH
RXYQ18AHRXYQ20AHRXYQ22AH
KHRP26M73TP, KHRP26M73HP
RXYQ24AH
KHRP26M22H, KHRP26M33H,(Max. 4 branch) (Max. 8 branch)KHRP26M72H, KHRP26M73H
(Max. 8 branch) (Max. 8 branch)
KHRP26A22T, KHRP26A33T, KHRP26A72T, KHRP26A73T
RXYQ26AHRXYQ28AHRXYQ30AHRXYQ32AHRXYQ34AH
RXYQ36AHRXYQ38AHRXYQ40AHRXYQ42AHRXYQ44AH
Distributivepiping
REFNET joint
REFNET header
Type
Item
No.
1
Pipe size reducer2
BHFP22P100 BHFP22P151KRC19-26ACool/Heat selector4
Outdoor unit multi connection piping kit3
RXYQ38AHRXYQ40AHRXYQ42AHRXYQ44AH
Type
Item
No.
DIII-NET expander adaptor1 DTA109A51External control adaptor2 DTA104A61Home Automation Interface Adaptor3 DTA116A51Option plate for control adaptor4 — BKS26A*1
DIII-NET expand adaptor1 DTA109A51External control adaptor2 DTA104A61
3 DTA116A51Option plate for control adaptor4 BKS26A*1BKS26A*1 ——
Type
Item
No.
RXYQ36AHRXYQ28AHRXYQ30AHRXYQ32AHRXYQ34AH
RXYQ12AHRXYQ14AHRXYQ16AHRXYQ18AH
RXYQ20AHRXYQ22AHRXYQ24AHRXYQ26AH
Option PCB
Option PCB
Distributivepiping
REFNET joint
REFNET headerKHRP26M22H, KHRP26M33H
(Max. 4 branch) (Max. 8 branch)
KHRP26A22T, KHRP26A33T
RXYQ22ARXYQ6ARXYQ8ARXYQ10A
Type
ItemNo.
1
KRC19-26A
KHRP26M22H, KHRP26M33H, KHRP26M72H(Max. 4 branch) (Max. 8 branch) (Max. 8 branch)
KHRP26A22T, KHRP26A33T, KHRP26A72TOutdoor unit multi connection piping kit2 — BHFP22P100
RXYQ16ARXYQ18A
RXYQ20ARXYQ12ARXYQ14A
Cool/Heat selector3
KHRP26M73TP, KHRP26M73HPKHRP26A22T, KHRP26A33T, KHRP26A72T, KHRP26A73T
KHRP26M22H, KHRP26M33H, KHRP26M72H, KHRP26M73H(Max. 4 branch) (Max. 8 branch) (Max. 8 branch) (Max. 8 branch)Distributive
piping
REFNET joint
REFNET header
Type
Item
No.
1
Pipe size reducer2
BHFP22P100 BHFP22P151Outdoor unit multi connection piping kit3
KRC19-26ACool/Heat selector4
RXYQ24A
RXYQ26ARXYQ28ARXYQ30ARXYQ32A
RXYQ34ARXYQ36ARXYQ38ARXYQ40A
RXYQ42ARXYQ44ARXYQ46ARXYQ48A
RXYQ50ARXYQ52ARXYQ54ARXYQ56A
RXYQ58ARXYQ60A
RXYQ14ARXYQ16ARXYQ18ARXYQ20A
RXYQ6ARXYQ8ARXYQ10ARXYQ12A
RXYQ22ARXYQ24A
KHRP26M22H, KHRP26M33H,(Max. 4 branch) (Max. 8 branch)
KHRP26M72H (Max. 8 branch)
Home Automation Interface Adaptor
RXYQ26ARXYQ28ARXYQ30ARXYQ32ARXYQ34ARXYQ36A
RXYQ38ARXYQ40ARXYQ42ARXYQ44ARXYQ46ARXYQ48A
RXYQ50ARXYQ52ARXYQ54ARXYQ56ARXYQ58ARXYQ60A
Note: *1. This plate is necessary for each adaptor marked .
Option PCB
No.Item
Type
DIII-NET expander adaptor 1 DTA109A51
External control adaptor 2 DTA104A61
Home Automation Interface Adaptor 3 DTA116A51
BKS26B BKS26COption plate for control adaptor 4
RSU(Y)Q4A RSU(Y)Q5A RSU(Y)Q6A RSU(Y)Q7A
Air direction adjustment grille
ItemNo.
5
Type
REFNET joint 3 KHRP26A22T KHRP26A22T, KHRP26A33T
Drain plug 4 BKP082A41
Header pack1 BHF6RHP6Z, BHF6ARHP6Z, BHF8RHP6Z
REFNET header 2 KHRP26M22H (Max. 4 branch), KHRP26M33H (Max. 8 branch)
KPW082A41
RSU(Y)Q4A RSU(Y)Q5A RSU(Y)Q6A RSU(Y)Q7A
2 KRC19-26ACool/Heat selector
1 Header pack
No. TypeItem
—
2-1 Fixing box
3
4
5 Central drain plug
6 Fixture for preventing overturning
7 Wire fixture for preventing overturning
BHF6RHP6Z, BHF6ARHP6Z, BHF8RHP6Z
REFNET header
K-KYZP15C
KJB111A —
KKPJ5G280
KKTP5B112
—
KHRP26A22T, KHRP26A33T
KHRP26M22H (Max. 4 branch), KHRP26M33H (Max. 8 branch)
KHRP26A22T
K-KYZP15C
KKPJ5G280
KKTP5B112
—
KHRP26A22T, KHRP26A33T
KHRP26M22H (Max. 4 branch), KHRP26M33H (Max. 8 branch)
KHRP26A22T
REFNET joint
RXYMQ4A RXYMQ5B RXYMQ6B RXYMQ8A RXYMQ9A
Heat Pump
1 Header pack
No. TypeItem
4 Central drain plug
5 Fixture for preventing overturning
6 Wire fixture for preventing overturning
BHF6RHP6Z, BHF6ARHP6Z, BHF8RHP6Z
2 REFNET header
3 REFNET joint
RXMQ4A RXMQ5B RXMQ6B RXMQ8A RXMQ9A
Cooling Only
215 216
Op
tio
n L
ist
Option List
Option List
Outdoor units
Distributive piping
REFNET joint
REFNET header
RQ(Y)Q6T(E)RQ(Y)Q8T(E)RQ(Y)Q10T(E)
RQ(Y)Q12T(E)RQ(Y)Q14T(E)RQ(Y)Q16T(E)
KHRP26M22H, KHRP26M33H (Max. 4 branch), (Max. 8 branch)
KHRP26M22H, KHRP26M33H, KHRP26M72H(Max. 4 branch) (Max. 8 branch) (Max. 8 branch)
KHRP26A22T, KHRP26A33T, KHRP26A72TKHRP26A22T, KHRP26A33T
KHRP26M22H, KHRP26M33H (Max. 4 branch) (Max. 8 branch),
KHRP26M72H (Max. 8 branch)
KHRP26M22H, KHRP26M33H, (Max. 4 branch) (Max. 8 branch)KHRP26M72H, KHRP26M73H
(Max. 8 branch) (Max. 8 branch)Distributive piping
REFNET joint
REFNET header
RQ(Y)Q18TN(E)RQ(Y)Q20TN(E)RQ(Y)Q22TN(E)
RQ(Y)Q24TN(E)RQ(Y)Q26TN(E)RQ(Y)Q28TN(E)
RQ(Y)Q30TN(E)RQ(Y)Q32TN(E)
Outdoor unit multi connection piping kit
Pipe size reducer
KHRP26A22T, KHRP26A33T, KHRP26A72T KHRP26A22T, KHRP26A33T, KHRP26A72T, KHRP26A73T
— KHRP26M73TP, KHRP26M73HP
BHFP22P100
KHRP26M22H, KHRP26M33H, KHRP26M72H, KHRP26M73H(Max. 4 branch) (Max. 8 branch) (Max. 8 branch) (Max. 8 branch)
KHRP26A22T, KHRP26A33T, KHRP26A72T, KHRP26A73TKHRP26M73TP, KHRP26M73HP
BHFP22P151
Distributive piping
REFNET joint
REFNET header
RQ(Y)Q34TN(E)RQ(Y)Q36TN(E)
RQ(Y)Q38TN(E)RQ(Y)Q40TN(E)
RQ(Y)Q42TN(E)RQ(Y)Q44TN(E)
RQ(Y)Q46TN(E)RQ(Y)Q48TN(E)
Outdoor unit multi connection piping kit
Pipe size reducer
Distributive piping REFNET header
REFNET joint
RQ(Y)Q18T(E)RQ(Y)Q20T(E)
KHRP26M22H, KHRP26M33H, KHRP26M72H(Max.4 branch) (Max.8 branch) (Max.8 branch)
KHRP26A22T, KHRP26A33T, KHRP26A72T
Distributive piping
RQ(Y)Q30TS(E)RQ(Y)Q32TS(E)RQ(Y)Q34TS(E)
RQ(Y)Q36TS(E)RQ(Y)Q38TS(E)RQ(Y)Q40TS(E)
RQ(Y)Q42TS(E)RQ(Y)Q44TS(E)
RQ(Y)Q46TS(E)RQ(Y)Q48TS(E)
KHRP26M22H, KHRP26M33H, KHRP26M72H, KHRP26M73H(Max.4 branch) (Max.8 branch) (Max.8 branch) (Max.8 branch)
KHRP26A22T, KHRP26A33T, KHRP26A72T, KHRP26A73TKHRP26M73TP, KHRP26M73HP
BHFP22P100 BHFP22P151Pipe size reducer
Outdoor unit connection piping kit
REFNET header
REFNET joint
Type
Item
No.
1
Type
Item
No.
Type
ItemNo.
1
Type
Item
No.
1
Type
ItemNo.
1
2
1
3
2
3
2
3
RWEYQ6TRWEYQ8TRWEYQ10TRWEYQ12T
RWEYQ14TRWEYQ16TRWEYQ18TRWEYQ20TRWEYQ22TRWEYQ24T
RWEYQ26TRWEYQ28TRWEYQ30TRWEYQ32TRWEYQ34TRWEYQ36T
Distributive piping
KHRP25M33H (Max. 8 branch), KHRP26M22H (Max. 4 branch), KHRP26M33H (Max. 8 branch)
KHRP25M33H (Max. 8 branch),KHRP25M72H (Max. 8 branch),KHRP26M22H (Max. 4 branch),KHRP26M33H (Max. 8 branch),KHRP26M72H (Max. 8 branch)
KHRP25M33H (Max. 8 branch), KHRP25M72H (Max. 8 branch), KHRP25M73H (Max. 8 branch), KHRP26M22H (Max. 4 branch), KHRP26M33H (Max. 8 branch), KHRP26M72H (Max. 8 branch), KHRP26M73H (Max. 8 branch)
KHRP25A22T, KHRP25A33T, KHRP26A22T, KHRP26A33T
KHRP25A22T, KHRP25A33T, KHRP25A72T, KHRP26A22T, KHRP26A33T, KHRP26A72T
KHRP25A22T,KHRP25A33T, KHRP25A72T, KHRP25A73T, KHRP26A22T, KHRP26A33T, KHRP26A72T, KHRP26A73T
Strainer kit BWU26A15, BWU26A20DTA104A62External control adaptor
Outside unit multi connection piping kit — BHFP22MA84
Item
Type
BHFP22MA563
4
2
1
No.
REFNET joint
REFNET header
KRC19-26A (Applies to RQYQ only)2 Cool / Heat selector
KRC19-26A (Applies to RQYQ only)2 Cool / Heat selector
KRC19-26A (Applies to RQYQ only)4 Cool / Heat selector
KRC19-26A (Applies to RQYQ only)4 Cool / Heat selector
KRC19-26A (Applies to RQYQ only)4 Cool / Heat selector
Distributive piping REFNET header
REFNET joint
RWHQ12THRWHQ14THRWHQ16TH
KHRP26M22H, KHRP26M33H, KHRP26M72H (Max. 4 branch) (Max. 8 branch) (Max. 8 branch)
KHRP26A22T, KHRP26A33T, KHRP26A72TBHFP22P100
BRCM82BRCS82
Outdoor unit multi connection piping kit
Hot water controller box
Hot water remote controller
Distributive piping REFNET header
REFNET joint
KHRP26M22H, KHRP26M33H, KHRP26M72H, KHRP26M73H(Max. 4 branch) (Max. 8 branch) (Max. 8 branch) (Max. 8 branch)
KHRP26A22T, KHRP26A33T, KHRP26A72T, KHRP26A73TKHRP26M73TP, KHRP26M73HP
BHFP22P151BRCM82BRCS82
Pipe size reducer
Outdoor unit multi connection piping kit
Hot water controller box
Hot water remote controller
Distributive piping REFNET header
REFNET joint
RWHQ24THRWHQ26THRWHQ28TH
RWHQ30THRWHQ32THRWHQ34TH
RWHQ18THRWHQ20THRWHQ22TH
KHRP26M22H, KHRP26M33H, KHRP26M72H, KHRP26M73H(Max. 4 branch) (Max. 8 branch) (Max. 8 branch) (Max. 8 branch)
KHRP26A22T, KHRP26A33T, KHRP26A72T, KHRP26A73TKHRP26A22T,KHRP26A33T, KHRP26A72T
KHRP26M73TP, KHRP26M73HP—BHFP22P151
BRCM82BRCS82
Pipe size reducer
Outdoor unit multi connection piping kit
Hot water controller box
Hot water remote controller
KHRP26M22H, KHRP26M33H,(Max. 4 branch) (Max. 8 branch)
KHRP26M72H(Max. 8 branch)
Type
Item
No.
1
2
3
4
Type
Item
No.
1
2
3
4
5
Type
ItemNo.
1
2
3
4
5
RWHQ48THRWHQ50TH
RWHQ36THRWHQ38TH
RWHQ44THRWHQ46TH
RWHQ40THRWHQ42TH
217 218
Op
tio
n L
ist
Option List
Option List
Outdoor units
Distributivepiping
REFNET header
REFNET joint
RWHQ18TRWHQ20T
KHRP26M22H, KHRP26M33H, KHRP26M72H(Max. 4 branch) (Max. 8 branch) (Max. 8 branch)
KHRP26A22T, KHRP26A33T, KHRP26A72TBRCM82BRCS82
Hot water controller boxHot water remote controller
Distributivepiping
REFNET header
REFNET joint
KHRP26M22H, KHRP26M33H, KHRP26M72H, KHRP26M73H(Max. 4 branch) (Max. 8 branch) (Max. 8 branch) (Max. 8 branch)
KHRP26A22T, KHRP26A33T, KHRP26A72T, KHRP26A73TKHRP26M73TP, KHRP26M73HP
BHFP22P151BRCM82BRCS82
Pipe size reducerOutdoor unit multi connection piping kitHot water controller boxHot water remote controller
RWHQ42TSRWHQ44TSRWHQ46TS
RWHQ48TSRWHQ50TS
RWHQ36TSRWHQ38TSRWHQ40TS
RWHQ22TSRWHQ30TSRWHQ32TSRWHQ34TS
RWHQ24TSRWHQ26TSRWHQ28TS
Distributivepiping
REFNET header
REFNET joint KHRP26A22T, KHRP26A33T, KHRP26A72T, KHRP26A73T
KHRP26M73TP, KHRP26M73HP—BHFP22P100
BRCM82BRCS82
Pipe size reducerOutdoor unit multi connection piping kitHot water controller boxHot water remote controller
KHRP26M22H, KHRP26M33H, KHRP26M72H, KHRP26M73H(Max. 4 branch) (Max. 8 branch) (Max. 8 branch) (Max. 8 branch)
KHRP26A22T, KHRP26A33T,KHRP26A72T
KHRP26M22H, KHRP26M33H,(Max. 4 branch) (Max. 8 branch)
KHRP26M72H(Max. 8 branch)
Distributivepiping
REFNET header
REFNET joint
RWHQ58TNRWHQ60TN
RWHQ34TNRWHQ36TNRWHQ38TNRWHQ40TN
RWHQ50TNRWHQ52TNRWHQ54TNRWHQ56TN
RWHQ42TNRWHQ44TNRWHQ46TNRWHQ48TN
KHRP26M22H, KHRP26M33H, KHRP26M72H, KHRP26M73H(Max. 4 branch) (Max. 8 branch) (Max. 8 branch) (Max. 8 branch)
KHRP26A22T, KHRP26A33T, KHRP26A72T, KHRP26A73TKHRP26M73TP, KHRP26M73HP
BHFP22P151BRCM82BRCS82
Pipe size reducerOutdoor unit multi connection piping kitHot water controller boxHot water remote controller
RWHQ30TNRWHQ32TN
—
RWHQ24TNRWHQ26TNRWHQ28TN
RWHQ18TNRWHQ20TNRWHQ22TN
KHRP26A22T, KHRP26A33T,KHRP26A72T, KHRP26A73T
Distributivepiping
REFNET header
REFNET joint
KHRP26M73TP, KHRP26M73HP
KHRP26A22T, KHRP26A33T, KHRP26A72T
BHFP22P100BRCM82BRCS82
Pipe size reducerOutdoor unit multi connection piping kitHot water controller boxHot water remote controller
Distributivepiping
REFNET header
REFNET joint
RWHQ12TRWHQ14TRWHQ16T
RWHQ6TRWHQ8TRWHQ10T
KHRP26A22T, KHRP26A33T, KHRP26A72TKHRP26A22T, KHRP26A33T
KHRP26M22H, KHRP26M33H,(Max. 4 branch) (Max. 8 branch)KHRP26M72H, KHRP26M73H
(Max. 8 branch) (Max. 8 branch)
KHRP26M22H, KHRP26M33H,(Max. 4 branch) (Max. 8 branch)
KHRP26M72H(Max. 8 branch)
BRCM82BRCS82
Hot water controller boxHot water remote controller
KHRP26M22H, KHRP26M33H, KHRP26M72H(Max. 4 branch) (Max. 8 branch) (Max. 8 branch)
KHRP26M22H, KHRP26M33H(Max. 4 branch) (Max. 8 branch)
Type
ItemNo.
1
23
TypeItem
No.
1
23
Type
ItemNo.
1
2345
Type
ItemNo.
1
2345
Type
ItemNo.
1
2345
Type
Item
No.
1
2345
Standard Type
Space Saving Type
VRV indoor units
Round Flow Cassette with Sensing Type
Round Flow Cassette Type
Decoration panel
Panel spacer
Filter chamber
Replacement long-life filter
Replacement long-life filter (Auto grille panel)
Ultra long-life filter unit (Including filter chamber) 9
Replacement ultra long-life filter 9, 10
Branch duct chamber 4
Insulation kit for high humidity 9, 11
Sealing material of air discharge outlet 4
Fresh air intake kit
For usage of 3-, 4-way flow
For usage of 2-way flow
High-efficiency filter unit 9
(Including filter chamber)
(Colorimetric method 65%)
(Colorimetric method 90%)
Replacement high-efficiency filter 9, 10(Colorimetric method 65%)
(Colorimetric method 90%)
Direct installation type 7
Without T-duct jointChambertype 5,6 With T-duct joint
Fresh white
Designer panel 1 Fresh white
Auto grille panel 2, 3 Fresh white
Black1
3
7
8
9
10
11
12
13
2
4
5
6
KDBH551C160KDBH552C160
KDDP55C160 (Components: KDDP55C160-1, KDDP55C160-2) 8
KDDP55C160K (Components: KDDP55C160-1, KDDP55C160K2) 8
KDDP55X160A
KDB55J160F
KDDFP55C160KAF5511D160KAF5512D160KAF555D160KAF550D160
KAF556D80 KAF556D160KAF557D80 KAF557D160KAF552D80 KAF552D160KAF553D80 KAF553D160
KDJP55C80 KDJP55C160KDTP55K80A KDTP55K160A
FXFQ50AFXFQ63AFXFQ80A
FXFQ25AFXFQ32AFXFQ40A
FXFQ100AFXFQ125AFXFQ140A
BYCQ125EAPF *BYCQ125EASF *
BYCQ125EAF *BYCQ125EAK *
Standard panel
No.Type
Item
Fresh white
Black
Decoration panel
Panel spacer
Filter chamber
Replacement long-life filter
Replacement long-life filter (Auto grille panel)
Ultra long-life filter unit (Including filter chamber) 9
Replacement ultra long-life filter 9, 10
Branch duct chamber 4
Insulation kit for high humidity 9, 11
Sealing material of air discharge outlet 4
Fresh air intake kit
For usage of 3-, 4-way flow
For usage of 2-way flow
High-efficiency filter unit 9
(Including filter chamber)
(Colorimetric method 65%)
(Colorimetric method 90%)
Replacement high-efficiency filter 9, 10(Colorimetric method 65%)
(Colorimetric method 90%)
Direct installation type 7
Without T-duct jointChambertype 5,6 With T-duct joint
KDBH551C160KDBH552C160
KDDP55C160 (Components: KDDP55C160-1, KDDP55C160-2) 8
KDDP55C160K (Components: KDDP55C160-1, KDDP55C160K2) 8
KDDP55X160A
BYCQ125EEFBYCQ125EEK
KDB55J160F
KDDFP55C160KAF5511D160KAF5512D160KAF555D160KAF550D160
KAF556D80 KAF556D160KAF557D80 KAF557D160KAF552D80 KAF552D160KAF553D80 KAF553D160
KDJP55C80 KDJP55C160KDTP55K80A KDTP55K160A
FXFSQ50AFXFSQ63AFXFSQ80A
FXFSQ25AFXFSQ32AFXFSQ40A
FXFSQ100AFXFSQ125AFXFSQ140A
Standard panel with sensing
Fresh white
Designer panel 1 Fresh white
Auto grille panel 2, 3 Fresh white
Black
BYCQ125EAPF *BYCQ125EASF *
1
3
7
8
9
10
11
12
13
2
4
5
6
BYCQ125EAF *BYCQ125EAK *
Standard panel
No.Type
Item
Notes: 1. When installing designer panel, body height (ceiling required dimension) is 42 mm higher than standard panel. Designer panel cannot operate 2 and 3 way flow.2. A dedicated wireless remote controller (BRC16A2) for the auto grille panel is included for lowering and raising the suction grille.3. When installing auto grille panel, body height (ceiling required dimension) is 55 mm higher than standard panel.4. Circulation airflow is not available with this option.5. When installing a fresh air intake kit (chamber type), two air outlet corners are closed.6. It is recommended that the volume of outdoor air introduced through the kit is limited to 10% of the maximum airflow rate of the indoor unit. Introducing higher quantities will increase the operating sound and may also influence temperature sensing.7. The volume of fresh air for direct installation type is approximately 1% of the indoor unit airflow. The chamber type is recommended when more fresh air is necessary.8. Please order using the names of both components instead of set name.9. This option cannot be installed to designer panel and auto grille panel.
10. Filter chamber is required.11. Please use in case temperature/humidity inside ceiling may get over 30˚C, 80% RH.*These panels do not contain the sensing function.
219 220
Op
tio
n L
ist
Option List
Ultra long-life filter
Filter chamber(Can be used with high-efficiency filter)
High-efficiency filter
Filter chamber(Can be used with ultra long-life filter)
Top panel insulation(1)
Top panel insulation(2)
Top panel insulation(3)
•Insulation for decoration panel•Side panel insulation •Suspension bracket insulation
Outside
Option List
VRV indoor unitsOptions of Round Flow Cassette with Sensing & Round Flow Cassette
Ultra long-life filter unit
Even in dusty environments where the air conditioning is constantly operating, the ultra long-life filter only has to be cleaned once a year.
Branch duct chamber
This chamber lets you connect a round flexible duct to the air discharge opening at any time after the original installation.
Sealing material of air discharge outlet
By using this option, 2-way, 3-way, or 4-way flow can be selected.
Panel spacer
Use when only minimal space is available between drop ceilings and ceiling slabs.
High-efficiency filter unit
Available in two types: 65% and 90% colorimetry.
Insulation kit for high humidity
Please use if you think the temperature and humidity inside the ceiling exceeds 30°C and RH 80%, respectively.
Fresh air intake kit 1, 2
Using this kit, a duct can be connected to take in outdoor air. There are two chamber types that have intake in two places: with T-duct joint and without T-duct joint.
The units can be installed in the following different ways:
Note: Some ceiling constructions may hinder installation. Contact your Daikin Dealer before installing your unit.
40mm
Panel spacer
Dusty area: annual filter change*For dust concentration of 0.3 mg/m3 (Requires separately sold Air purifier.)1 year (Approx. 5,000 hr): About 15 hr/day x 28 day/month x 12 month/year
Ordinary store or office: filter change every 4 years*For dust concentration of 0.15 mg/m3 4 years (Approx. 10,000 hr): About 8 hr/day x 25 day/month x 12 month/years x 4 years
Direct installation type 6
Notes: 1. Use of options will increase operating sound.2. Connecting ducts, fan, insect nets, fire dampers, air filters, and other
parts should, as required, be obtained locally. 3. When a local-obtained fan is used, an interlock with air conditioner is
necessary. Optional PCB (BRP11B62) is required for interlocking.4. When installing a fresh air intake kit (chamber type), two air outlet
corners are closed.5. It is recommended that the volume of outdoor air introduced through
the kit is limited to 10% of the maximum airflow rate of the indoor unit. Introducing higher quantities will increase the operating sound and may also influence temperature sensing.
6. The volume of fresh air for direct installation type is approximately 1% of the indoor unit airflow.The chamber type is recommended when more fresh air is necessary.
Options required for specific operating environments
Single Flow Cassette Type
Decoration panel
FXEQ20AFXEQ25A
FXEQ32AFXEQ40AItem
Type FXEQ50AFXEQ63A
BYEP40AW1 BYEP63AW1
No.
1
Slim Duct (Standard) TypeFXDQ25PD FXDQ32PDFXDQ20PD
KDT25N32 KDT25N50 KDT25N63Insulation kit for high humidity
TypeItem FXDQ63NDFXDQ50NDFXDQ40NDNo.
1
Middle Static Pressure Duct Type
FXSQ40PAFXSQ50PAFXSQ63PAFXSQ80PA
FXSQ20PAFXSQ25PAFXSQ32PA
FXSQ100PAFXSQ125PA FXSQ140PA
KAF633C80 KAF633C160KDDF63B160B KDDFP63B80 KDDFP63B160
KAF631C80 KAF631C160KTBJ25K80F
KAF633C56 KDDFP63B56KAF631C56KTBJ25K56F
KAF633C36KAF632C80 KAF632C160KAF632C56KAF632C36
KDDFP63B36KAF631C36KTBJ25K36F KTBJ25K160F
KDAP25A71A KDAP25A140A KDAP25A56A KDAP25A36A KDBD63A160
KDAP25A160A *2
—
Item
Type
KAF632B160BKAF633B160B
KAF631B160B
No.
1
2
3456
Notes: *1. If installing high efficiency filter and long-life filter to the unit, filter chamber is required.*2. This option is a set of KDAP25A140A and KDBHP37A160.
High efficiency filter *1
Filter chamber (for rear suction) *1
Long-life filter *1
Service panel (Fresh white)
Air discharge adaptorShield plate for side plate
65%90%
Flexible duct BFD37B40 BFD37B50 BFD37B631
3D Airflow Duct with Sensing TypeTypeItemNo. FXDSQ20A FXDSQ25A FXDSQ32A FXDSQ40A FXDSQ50A FXDSQ63A
Double Flow Cassette Type
Compact Multi Flow Cassette Type
Note: *1. If installing high efficiency filter, filter chamber is required.
Note: 1. Option relay wire harness adaptor (BER01A1) is necessary when installing decoration panel (BYFQ60B3W1).
FXCQ20A FXCQ25A FXCQ32A FXCQ40A FXCQ50A FXCQ63A FXCQ80A FXCQ125ADecoration panel
High efficiency filter *1
Filter chamber for bottom suction
BYBCQ40CFKAF532C50KAF533C50KDDFP53B50
Long life replacement filter KAF531C50
BYBCQ63CFKAF532C80KAF533C80
KDDFP53B80KAF531C80
BYBCQ125CFKAF532C160KAF533C160
KDDFP53B160KAF531C160
TypeItemNo.
1
2
34
90 %65 %
KDDP55X160A
Chamber type (with T-duct joint) 3, 4, 5
KDDP55C160K
Chamber type (without T-duct joint) 3, 4, 5
KDDP55C160 Flexible duct(obtained locally)
T-duct joint(obtained locally)
Intake duct(obtained locally)(duct length: 4 m max.)
Connection chamberSuction chamber
Flexible duct
T-duct joint
Intake duct(obtained locally)(duct length: 4 m max.)
Connection chamber
Duct flange (with insulation material)
Suction chamber
Intake duct(obtained locally)
FXMQ100PAFXMQ125PAFXMQ140PA
Middle-High Static Pressure Duct Type
FXMQ40PAFXMQ50PAFXMQ63PAFXMQ80PA
FXMQ20PAFXMQ25PAFXMQ32PA
KAF372B80 KAF372B160KAF373B80 KAF373B160
KDDF37AA80 KDDF37AA160KAF371B80 KAF371B160KAF375B80
KAF372B56KAF373B56
KDDF37AA56KAF371B56KAF375B56
KAF372AA36–––– KAF375B160
KTBJ25K80F KTBJ25K160FKTBJ25K56FKTBJ25K36FKDAJ25K71AKDAJ25K56AKDAJ25K36A KDAJ25K140A
Item
65%90%
TypeNo.
2
345
6
7
High efficiency filter
Filter chamberLong life replacement filterLong life filter chamber kit
Service panel (Fresh white)
Air discharge adaptor
1 Drain pump kit –
TypeItem
BYFQ60CAWBRYQ60AAWBYFQ60B3W1
BER01A1KDBH44BA60KAF441C60
KDDQ44XA60
Grid ceiling panelSensor kit for grid ceiling panelDecoration panel *1
Relay wire harness adaptor for decoration panel *1
Sealing material of air discharge outlet for decoration panelReplacement long life filterFresh air intake kit
1-11-22-12-22-334
No. FXZQ20A FXZQ25A FXZQ32A FXZQ40A FXZQ50A
221 222
Op
tio
n L
ist
Option List
Option ListVRV indoor units
TypeItemNo.
BDU510A250VMBDT520A250
BAFM503A250BAFH504A250
BAFL501A250BAFL502A250
BDD500A250
FXMQ200P FXMQ250P
FXUQ71A FXUQ100A
High Static Pressure Duct Type
65%90%
5
3
Drain pump kit
6 Insulation kit for high humidity
High efficiency filter
4 Filter chamber (long life filter, high efficiency filter)
1 8mm pre-filter2 30mm long life replacement filter
Ceiling Suspended Type
FXHQ32MA1 Drain pump kit2 Replacement long-life filter
KDU50N60VEKAFJ501D56
3 L-type piping kit (for upward direction) KHFP5M63
FXHQ125A
KDUP50P160KAF501B160KHFP5N160
FXHQ140AFXHQ63MA
KDU50N125VEKAFJ501D80
KHFP5M160
FXHQ100MA
KAFJ501D112
No. TypeItem
Wall Mounted Type
FXAQ25AFXAQ20A
K-KDU572EVE
FXAQ32A FXAQ40A FXAQ50A FXAQ63ANo. TypeItem1 Drain pump kit
BEV15D BEV30D2 External EV kit (for heating operation)*1
Concealed Floor Standing Type
FXNQ20MA FXNQ25MA FXNQ32MA FXNQ40MA FXNQ50MA FXNQ63MA
KAF361L28 KAF361L45 KAF361L71
No. TypeItem1 Long life replacement filter
Floor Standing Type
FXLQ20MA FXLQ25MA FXLQ32MA FXLQ40MA FXLQ50MA FXLQ63MA
KAF361L28 KAF361L45 KAF361L71
No. TypeItem1 Long life replacement filter
FXVQ125N FXVQ200N FXVQ250N FXVQ500NFXVQ400NTypeItem
TypeItem
Replacement long life filterUltra long-life filter
Front suction filter chamber for highefficiency filter
Plenum chamber *4
Pulley for plenum chamber *4
Fresh air intake kitRear suction kitDischarge grille for plenum side
Wood baseVibration isolating frame
KAF261M140
KD-9A140KDGF-9A140KAF-91B140KAF-92B140KAF-93B140KDDF-9A140
KPCJ140AKPP8JA
KDFJ905B140
KKWJ9A140K-ABSG1406A
KAF261M224—
KD-9A200KDGF-9A200KAF-91B200KAF-92B200KAF-93B200KDDF-9A200
KPC5JKPP9JA
KAF261M280
KD-9A280KDGF-9A280KAF-91B280KAF-92B280KAF-93B280KDDF-9A280
KPC8JKPP10JA
KAF261N450KAFSJ9A400KD-9A400
KDGF-9A400KAF-91B400KAF-92B400KAF-93B400KDDF-9A400
KPCJ400A
KAF261N560KAFSJ9A560KD-9A560
KDGF-9A560KAF-91B560KAF-92B560KAF-93B560KDDF-9A560
KPC15JA
KDFJ905B200
KWF1G5PK-ABSG1407A
KDFJ905B280
KWF1G8PK-ABSG1408A
KDFJ905B400
KKWJ9A400K-ABSG1409A
KDFJ905B560
KWF1G15K-ABSG1410A
Front suction base flange
Suction grille
Filter chamber *1, 2
Replacement long-life filter *1, 2, 3
Dis
char
ge a
nd S
uctio
n
No.
KDFJ906A560KD106D10
KD101A10
—
KD101A20
Notes: *1. When ordering a filter chamber for high efficiency filter (65%), please order with all the respective parts.*2. When ordering a filter chamber for high efficiency filter (90%), please order with all the respective parts.*3. When replacing with a new filter, please order the replacement filters with the corresponding filter model name.*4. Use the plenum chamber and pulley for plenum chamber in combination.
FXBQ40P FXBQ50P FXBQ63P FXBPQ63PTypeItem
Outlet unitFilter
Panel
Outside air intake duct flange
BAFH82A50BYB82A50CBYB82A50W
—BAFH82A63
BYB82A63CBYB82A63W
KDFJ82A80
BAF82A63
BYB82A63CPBYB82A63WP
HEPA filterCeiling intake typeFloor-level intake type
Clean Room Air Conditioner
Floor Standing Duct Type
Spot Air Conditioner
KCD-250D1 *1, 2
KCD-250D2 *1, 2
KCD-350D1 *1
KCD-350D2 *1
CHC250 *1, 2
CHC350 *1
CHH250CHH350 *1
KDF87A28KDG87A28 + KPW87A28
KAF87A28GKAF87A28
KKSH87B28 *4 (KKSH87B28-1 + KKSH87B28-2)KKSS87B28
KWM87A28 *1, 3
Extension duct
Duct fixing band
Duct suspending band
Air discharge adaptorAirflow direction adjustment grille (Manual adjustment)Oil-mist filterLong life replacement filterInstallation standLifting lugAuxiliary drain pan
FXPQ25A
250
250
350
350250350
Notes: *1. It is order production.*2. Air discharge adaptor (KDF87A28) is used.*3. Lifting lug (KKSS87B28) is available in combination.*4. Wired remote controller is available.
123456789101112131415
No.
1
2
3
456789
10
No.
12345
Filter chamber for high efficiency filter *1, 2
Replacement high efficiency filter
65% *1, 3
90% *2, 3
4-Way Flow Ceiling Suspended Type
Sealing material of air discharge outletDecoration panel for air dischargeReplacement long-life filter
KDBHP49B140KDBTP49B140KAF5511D160
TypeItemNo.
123
Note :*1. This option is only effective for reducing operation sound during heating operation. Therefore it is ineffective when connected to cooling only outdoor units.
Residential indoor units with connection to BP units
BP Units for Connection to Residential Indoor UnitsBPMKS967A2
1 REFNET joint KHRP26A22T
BPMKS967A3No. TypeItem
Wall Mounted Type
Slim Ceiling Concealed Type
FDKS35EACDXS35EA
FDKS25EACDXS25EA
1 Insulation kit for high humidity KDT25N32
FDKS25CAFDXS25C
FDKS35CAFDXS35C
FDKS50CFDXS50C
FDKS60CFDXS60C
No.Type
ItemKDT25N50 KDT25N63
FTKS25DFTXS25E
FTKS35DFTXS35E
FTXS20D FTKS50FFTXS50F
FTKS60FFTXS60F
FTKS71FFTXS71F
FTKS50B
1 Titanium apatite deodorising filter*1 KAF970A46 KAF971B422 Dust collection filter (PM 2.5) with frame BAFP046A42 –3 Dust collection filter (PM 2.5) without frame BAFP046A41 –
No.Type
Item
FTKJ35NFTXJ35N
FTKJ25NFTXJ25N
FTKJ50NFTXJ50N
Note: *1. Filter is a standard accessory. It should be replaced approximately 3 years.
Note: A single BP unit does not require a REFNET joint. 2 BP units require only 1 REFNET joint, and 3 BP units require only 2 REFNET joints.
4 Fresh air intake kit KDDQ50A140—
Precision Piping MethodHEADER PACK
Daikin Gas Tight Joint1
No.
1
No.
6
HEADER PACK BHF6RHP6Z
6
BHF6ARHP6Z
6–8
BHF8RHP6Z
10
BHF10RHP6Z
12–16
BHF16RHP6Z
HPItem
Connecting the same pipes
Daikin Gas Tight JointBDGTA06, BDGTA09, BDGTA12BDGTA15, BDGTA19, BDGTA22BDGTA28, BDGTA34, BDGTA41
Connecting different size pipes
BDGTA1209, BDGTA1512BDGTA2219, BDGTA2825
TypeItem
223 224
Op
tio
n L
ist
Option List
Example:
Interlocking operation of the indoor unit and ventilation fan that takes in fresh air.
VRV outdoor unit
Ventilation Fan Adaptor
IndoorUnit
Air Conditioning + Ventilation
Notes: 1. Installation box for adaptor must be obtained locally. 2. For residential use only. Cannot be used with other
centralised control equipment.
3. No adaptor is required for some indoor units.4. Because the maximum transmission length varies according to actual installation conditions and
diameter of wiring used, please confirm by a dedicated simulator.5. Installation box is necessary for adaptor BRP114A61. Please refer to option list for each indoor unit.
Option List
Control systems
Operation control system optional accessories
No. Item Model No. Function
1
intelligent TouchController
Basic Hardware intelligent TouchController DCS601C51 • Air-Conditioning management system that can be controlled by a
compact all-in-one unit. 1-1 Hardware
OptionSoftware
DIII-NET plus adaptor
Web software
DCS601A52
DCS004A51
• Additional 64 groups (10 outdoor units) is possible.
1-3
1-2
Electrical box with earth terminal (4 blocks) KJB411A • Wall embedded switch box.2
intelligent TouchManager
Basic Hardware intelligent Touch Manager DCM601A51 • Air-conditioning management system that can be controlled by touch screen.
2-1
Option
Hardware iTM plus adaptor DCM601A52 • Additional 64 groups (10 outdoor units) is possible.Max. 7 iTM plus adaptors can be connected to intelligent Touch Manager.
• VRV system that is connected to intelligent Touch Controller can be operated from the user's PC via a web page.
2-2
2-3 Software
Hardware
iTM powerproportionaldistribution
DCM002A51• Power consumption of indoor units are calculated based on operation
status of the indoor unit and outdoor unit power consumption measured by kWh metre.
2-42-52-62-72-82-9
iTM energynavigator DCM008A51 • Building energy consumption is visualised.
Wasted air-conditioning energy can be found out.• BACnet® equipment can be managed by intelligent Touch Manager.• Interface for intelligent Touch Manager by HTTP• VRV Smartphone Control System for residence• VRV Smartphone Remote Controller for building• Tenant Billing System with PPD• VRV Smartphone Control System for residence with DTA116A51.
BACnet® client DCM009A51DCM007A51
SVMPR2SVMPC2
SVMPS1 *5
SVMPR1
SVMPC12-10
2-112-122-13
VRV Tablet and Smartphone Controller
VRV Smartphone Control System
3
Communicationinterface
Interface for use in BACnet® *2 DMS502B51• Interface unit to allow communications between VRV and BMS.
Operation and monitoring of air-conditioning systems through BACnet® communication.
3-1 Optional DIII board DAM411B51• Expansion kit, installed on DMS502B51, to provide 2 more DIII-NET
communication ports. Not usable independently.
3-2 Optional Di board DAM412B51 • Expansion kit, installed on DMS502B51, to provide 16 more wattmeterpulse input points. Not usable independently.
4 Interface for use in LONWORKS® *3
5 Home Automation Interface Adaptor
DMS504B51• Interface unit to allow communications between VRV and BMS.
Operation and monitoring of air-conditioning systems through LONWORKS®
communication.
DTA116A51 • Use of the Modbus® protocol enables the connection of the VRV system with a variety of home automation systems from other manufacturers. *6
6Contact/analogue signal
Unification adaptor for computerisedcontrol DCS302A52 • Interface between the central monitoring board and central control units.
HTTP Interface
SVM series *1
Notes: *1. HTTP interface (DCM007A51) is also required.*2. BACnet® is a registered trademark of American Society of Heating, Refrigerating and
Air-Conditioning Engineers (ASHRAE).*3. LonWorks® is a trademark of Echelon Corporation registered in the United States and
other countries.
*4. Installation box for adaptor must be obtained locally.*5. PPD option (DCM002A51) for iTM is also required.*6. Modbus® is a registered trademark of Schneider Electric S.A.
System configurationNo. Item Model No. Function
1 Residential central remote controller DCS303A51 *2• Up to 16 groups of indoor units (128 units) can be easily controlled using the
large LCD panel. ON/OFF, temperature settings and scheduling can be controlled individually for indoor units.
2345
Interface adaptor for residential indoor unitsInterface adaptor for SkyAir-seriesCentral control adaptor kit For UAT(Y)-K(A),FD-KWiring adaptor for other air-conditioner
7-1 Multi tenant unit for Indoor (24 V free type)
7-2 Multi tenant unit for Outdoor (24 V free type)
7-3 Multi tenant unit Booster (24 V free type)
KRP928BB2S • Adaptors required to connect products other than those of the VRV System to the high-speed DIII-NET communication system adopted for the VRV System.* To use any of the above optional controllers, an appropriate adaptor must be
installed on the product unit to be controlled.DTA103A51DTA107A55
DTA112BA51 *3
6 DIII-NET expander adaptor DTA109A51• Up to 1024 units can be centrally controlled in 64 different groups.• Wiring restrictions (max. length: 1,000m, total wiring length: 2,000m, max.
number of branches: 16) apply to each adaptor.
Building management system
6-1 External control adaptor DTA104A61 • Demand control of individual or multiple systems.• Low noise option for individual or multiple systems.
• Use in multi tenant buildings where one tenant shuts off the breaker of the indoor unit.• Max. length from outdoor unit to last indoor unit per 1 outdoor adaptor is 200 m.• 8 indoor units can be connected per 1 outdoor adaptor.
• Use when extending transmission length with the multi tenant option.• Can add Max. 3 booster units to 1 system.• Total transmission length is Max. 800 m.• Total connectable indoor units is Max. 32 units.
6-2 Mounting plate BKS26A
BRP114A61 *4, 5
BRP114A62 *4
BRP114A63 *4
• When installing DTA109A51, DTA104A61 into outdoor units of 10 HP (VRV X) / 14 HP (VRV A/H) or larger.
MSMPN1DEC101A51DEC102A51
• MSM can control all VRV units via SVM system on multi site.• 8 pairs based on a pair of ON/OFF input and abnormality input.• 4 pairs based on a pair of ON/OFF input and abnormality input.
Multi Site Management System by using SVMPC1Di unitDio unit
• VRV Tablet and Smartphone Controller for small size building or residence with DTA116A51.
5-1 Mounting plate BKS26A • When installing DTA116A51 into outdoor units of 10 HP (VRV X) / 14 HP (VRV A/H) or larger.
For VRV indoor unit use
For residential indoor unit useType
Item
No.
KRP413BB1S
Wireless typeRemote controller
Remote controller loss prevention chain
Wiring adaptor for time clock/remote controller *2
(Normal open pulse contact/normal open contact)
1
2
3
— *1
KRP928BB2SInterface adaptor for DIII-NET use4
FDKS-EA, C(A)CDXS-EAFDXS-C
FTKJ-NFTXJ-N
FTKS-D, B, FFTXS-D, E, F
Remote sensorBRCS01A-1(4)(5)(6)
New Design
BRP11B61 BRP11B62
Adaptor for wiring (operation status output)By installing it in the indoor unit with a simple wire connection, this adaptor takes out the operating signals for the indoor unit fan and the compressor and enables the interlocking of equipment such as the ventilation fan.
Notes: 1. A wireless remote controller is a standard accessory.2. Time clock and other devices should be obtained locally.
Stylish remote controller
No.
1
2
3
4
5-1
5-2
6-1
6-2
7
8
9
10
No.
1
2
3
4
5-1
5-2
6-1
6-2
7
8
9
10
11
12
KKF917A4 KKF910A4 KKF917A4
Notes: 1. Installation box is necessary for each adaptor marked .2. Up to 2 adaptors can be fixed for each installation box.3. Only one installation box can be installed for each indoor unit.4. Up to 2 installation boxes can be installed for each indoor unit.5. Some functions can be set only via the wired remote controller
BRC1E63 or BRC1F61. They cannot be set via other remote controllers. Please refer to each indoor unit and remote controller page for function details.
6. Since the control panel is equipped as standard, use the option of BRC1E63 for 2 remote control system.
7. When using BRC1H61W(K), BRC1E63 or BRC2E61, be sure to remove the control panel and since BRC1H61W(K), BRC1E63 and BRC2E61 cannot be stored inside the indoor unit, please place it separately.
8. Remove the group control adaptor which is a standard equipment before mounting KRP2A62, KRP2A61 and DTA104A62. KRP2A62, KRP2A61 and DTA104A62 cannot be mounted to the same indoor unit at the same time.
9. When KRP4AA51 is used, operation by two remote controllers is not available.10. It is order production.
Navigation remote controller
Simplified remote controller
C/O
H/P
Adaptor for wiring (operation status output)
Adaptor for wiring
Wiring adaptor for electrical appendices (1)Wiring adaptor for electrical appendices (2)Remote sensor (for indoor temperature)Installation box for adaptor PCBExternal control adaptor for outdoor unitMulti tenant unit for Indoor (24 V free type)
FXFSQ-A
BRC1E63 *5
BRC2E61
BRC7M635F (Fresh White) BRC7M635K (Black)
BRC7M531W (for grid ceiling panel)BRC7E531W (for decoration panel) BRC7M66 BRC4M63 BRC4M66 BRC4C66
BRC7M634F (Fresh White)BRC7M634K (Black)
BRC7M530W (for grid ceiling panel)BRC7E530W (for decoration panel) BRC7M65 BRC4M61 BRC4M65 BRC4C65
— BRP11B62 BRP11B61— BRP11B62
—
—
—
BRC1E63
— KRP1C14A
KRP2A51 — — KRP2A53 KRP2A61 KRP2A62—
KRP4AA53 KRP4AA51 — KRP4A54 — KRP4AA51
BRCS01A-5 BRCS01A-6 BRCS01A-4 BRCS01A-1 BRCS01A-4
KRP1C96 *2, 3 — KRP1BB101 *4 — KRP4A98 *2, 3KRP1BB101 *4KRP1H98A *2, 3
DTA104A61 — DTA104A53 — DTA104A61 DTA104A62
—
—
BRC1F61 BRC1F61 *5 BRC1E63
BRC2E61
FXFQ-A
Stylish remote controller
Navigation remote controller
Simplified remote controller
C/O
H/P
Wireless remote controller
Wireless remote controller
Adaptor for wiring (operation status output)
Adaptor for wiring
Wiring adaptor for electrical appendices (1)Wiring adaptor for electrical appendices (2)Remote sensor (for indoor temperature)Installation box for adaptor PCBExternal control adaptor for outdoor unitMulti tenant unit for Indoor (24 V free type)
FXMQ-PA FXMQ-P FXUQ-A FXHQ-MA
BRC1H61W (White) / BRC1H61K (Black)
BRC1E63 BRC1E63 *6 BRC1E63BRC1E63 *5BRC1E63
BRC2E61
BRC7EA66 BRC7M56 BRC7M676 BRC4C64 — BRC4C64BRC4C66 BRC7CB59
BRC4C65 BRC7CB58 BRC7EA63W BRC7M53 BRC7M675 BRC4C62 — BRC4C62
BRP11B61 — BRP11B62 — BRP11B62 BRP11B62 —
KRP1C13A — KRP1C67 KRP1C67 ——
KRP2A62 — KRP2A61 KRP2A61 KRP2A62 *8 KRP2A61 KRP2A61 KRP2A61 KRP2A61 —
KRP4AA51 KRP4AA51 KRP4AA53 KRP4AA52 KRP4AA51 KRP4AA51 — KRP4AA51
BRCS01A-4 BRCS01A-6 BRCS01A-4 BRCS01A-1 BRCS01A-4 BRCS01A-6 BRCS01A-1 — BRCS01A-1
KRP1CA93 *3 KRP1D93A *3 KRP4B93 *2, 3 — KRP4A987*2, 3, 10 —KRP1BA97—KRP4A97 *2, 3
DTA104A61 BRCS01A-6 — DTA104A62 DTA104A61 DTA104A61 DTA104A62*8 — DTA104A61
— —
—
—
KRP6A1*8
KRCB37-1
—
—
FXHQ-A FXAQ-A FXLQ-MAFXNQ-MA FXVQ-N *7 FXPQ-A FXBQ-P
FXBPQ-P
FXZQ-A
BRC1H61W (White) / BRC1H61K (Black)
FXCQ-A FXEQ-A FXDSQ-A FXDQ-SP
BRC1H61W (White) / BRC1H61K (Black)
FXSQ-PAFXDQ-PDFXDQ-ND
External control adaptor for cooling / heating
Remote controller with key
BRP114A61
BRP114A61 BRP114A61
BRP114A61
KRP4AA51*9
TypeItem
TypeItem
225 226
Daikin Engineering SupportsVRV design and sales proposal assistance
Daikin provides engineering supports for VRV systems. It consists of design supports that can assist consultants and architects, as well as sales proposal supports for air conditioning engineers and dealers. We at Daikin provide the software, the simulation results, and drawing materials to support the building information modeling (BIM) currently entering the mainstream in construction industries.
CADXpress is a flexible design software that optimises equipment selection and CAD drawing. It can empower consultants and air conditioning engineers so they can fully enhance their equipment selections to design the most effective, optimum systems possible. The software also allows the choice of outdoor units based on peak loads rather than the sum of required capacities for each indoor unit. This fine-tuning feature reduces VRV system sizes and increases efficiency.Additionally, the CAD function enables automatic calculation of piping diameter and length without any need for CAD software.
Model selection softwareCADXpress
DT FLOW 2 is a simulation software that uses computational fluid dynamics (CFD), aiming to optimise outdoor unit layouts right at the design stage. When discharged air from the outdoor unit is drawn back into the suction vent, it can short circuit the system and lead to: decrease in efficiency of cooling operations, capacity shortages, operation cut-offs, and shorter lifetime for the outdoor unit. To avoid the need for expensive layout modifications once construction is complete, Daikin uses the CFD method at the early design stage. This can help consultants and architects optimise their outdoor unit arrangement.
New software for indoor airflow simulation will be coming soon.Indoor airflow simulation is a method for predicting temperature distribution and velocity distribution of indoor environment.
CFD simulation to optimise outdoor unit layouts DT FLOW 2
CADXpress
DS-HL2 uses ASHRAE’s Radiant Time Series method to compute heat load for a 24-hour period on summer and winter days. The Radiant Time Series considers the delay in heat load coming into the room through outer walls and the roof in the form of conduction and radiation. Airflow calculation for rooms can be performed. Detailed reports are available for different breakdown requirements. Additional monthly calculation is also available with an advanced license tier.24-hour weather data for all major cities is based on data recorded from past years.
Heat load calculation DS-HL2
Users download CAD symbol drawing materials, including 2D CAD symbols and 3D Revit data, for VRV systems designing. The 3D Revit data contains specifications for Daikin products, including things like capacities and electric characteristics to support Building Information Modeling (BIM).
Drawing supportsCAD Symbols
CADXpress
Outdoor unit Indoor unit
Design assistance
Combines energy efficiency and comfort
CFD simulation to optimiseoutdoor unit layouts Heat load calculation
Design flexibility
For consultants and architects
Sales proposalsFor air conditioning engineers and dealers
Drawing materials supportModel selectionHeat load calculation
Model selectionHeat load calculation