errorid_nr errorid_number domain_name location - Home ...

errorid_nr errorid_number domain_name location description version

628670 1 ar ddddbridge.cc Bridge received unexpected event, parameter is the EvenId 1

628671 2 ar DDipc.cc Ipc received message to unknown Domain, Parameter is SigNr. 1

628672 3 ar **maps.cc Tried to remove unexisting entry from mapping table 1

628681 4 ar <Do>all <obj>.cc Take Event received unexpected event, parameter event Id 1

628682 5 ar <Do>all <obj>.cc Could not find a subtype which matches the incoming event, parameter event_Id 1

628683 6 ar <Do>all <obj>.cc Could not find an Instance for the called object, parameter object-Id 1

628950 7 ar armstcont.cc General armst error id. 1

629259 8 ar aruniquevalue.cc Unique value is too large. All have been allocated. See syscommon.h : MaxUniqueValue (probably a not delete-ing error when values are finished with) 1

629364 9 ar armstcont.cc A trace point with invalid parameters was called. 1

629572 10 ar assert.hh Assert failed. 1

629584 11 ar arfilesegment.cc A file segment without a valid data block was detected. Shouldn't ever happen. 1

629589 12 ar arlibprc.cc An unhandled signal was passed to the process framework. Parameter 1: Signal Major and Minor (8 bit each), Parameter 2: Sender PID, Parameter 3: Receiver PID, If all 4

629590 13 ar arprcwatchdog watchdog process error 1

629786 14 ar arspdrecovery.cc Trying to restore an object with an id that does not exist in the handleIdpool 1

629787 15 ar arspdrecovery.cc Unable to allocate memory from the boot heap. The reference and Id of the object to be restored is deleted 1

629788 16 ar arspdrecovery.cc Unable to restore the handle ID pool. Trying to create a new one 1

629789 17 ar arspdrecovery.cc Entry is locked although it shouldn't, skip it 1

629790 18 ar arspdrecovery.cc Integrity check: Handle Id is out of allowed range 1

629791 19 ar arspdrecovery.cc Integrity check: Object reference doesn't point into heap 1

629792 20 ar arspdrecovery.cc Integrity check: Too many errors during check. Can not deallocate all invalid IDs 1

629793 21 ar arspdrecovery.cc Integrity check: Unknown state in recoveryList. Initialise to default 1

629794 22 ar arspdrecovery.cc Could not create new handle ID for an object 1

629795 23 ar arspdrecovery.cc Unable to allocate memory from heap with new 1

629796 24 ar arspdrecovery.cc Unable to free entry in dataRecoveryList 1

629797 25 ar arspdrecovery.cc Unable to get handle Id from reference. Can not deallocate handle Id 1

629798 26 ar arspdrecovery.cc Fatal error: Could not deallocate memory with operator delete --> crash 1

629799 27 ar arspdrecovery.cc Could not get reference from handle Id 1

629861 28 ar datetime.cc Subtraction returned a value < 0. Absolute value is taken. 1

629862 29 ar arfilelowlevel.cc

memory alloctead via _sbrk will never be freed. This does not mean that it creates a real memory leak, it can be allocated again by the cadul alloc sys call. But you will get serious

problems useing _sbrk in dynamic processes, because they crash if they have still memory allocated upon termination. 1

629922 30 ar arrul.c Tried to get size of a compressed application file with no valid header 1

629923 31 ar arrul.c CRC-check of compressed application file failed 1

629924 32 ar arrul.c Tried to check CRC of a compressed application file with no valid header 1

629925 33 ar artimer.cc tried to start a timer without setting the expiry time 1

629926 34 ar artimer.cc wrong parameter passed to arTimerC 1

630196 35 ar generatedActiveObject.cc Statemodel received can't happen event. 1

630197 36 ar generatedActiveObject.hh Event sent to wrong subtype. 1

630209 37 ar AllGeneratedActiveObjects.cc This Warning is raised if an event of a Statemodel is sent to an non existing instance. This can happen if the instance was deleted during the event was in the queue. 1

630634 38 ar arlibspdrecovery.cc CRC of idPool corrupted! 1

630635 39 ar arlibspdrecovery.cc couldn't add the new handle to the DataRecoveryList! 1

630636 40 ar arlibidpool.cc could not allocate new id 1

630637 41 ar arlibidpool.cc could not deallocate id in pool 1

630642 42 ar arlibspdrecovery.cc CRC of recoveryList corrupted! 1

630643 43 ar arlibspdrecovery.cc ID in idPool does not match ID in recoveryList 1

630644 44 ar arlibspdrecovery.cc Number of allocated IDs different in idPool and recoveryList 1

631146 45 ar arcfgfacparam.cc Unknown TepId-Type used for facparam.setSubscRef() 1

631253 46 ar arrul.c no valid location to check for a compressed application file 1

631254 47 ar arrul.c reading header of compressed application file form flash failed 1

631255 48 ar arrul.c compressed application file exceeds the maximum allowed size 1

631259 49 ar arrul.c reading flash failed 1

646303 50 ar arlibtypedata.cc The application tried to move the data pointer out of bounds. 1

653049 51 ar ArLibUaCallIdAllocatorC Tried to free a call id that was not allocated. 1

656426 52 ar arlibtimer.cc Either the timer instance in the expiry signal was NULL or the signal at all was invalid. 1

659625 53 ar arlibtimer.cc ArlibTimerC pointer duplicated. 1

659626 54 ar arlibtimer.cc ArLibTimerC pointer not found. 1

667871 55 ar arlibtimer.cc Unexpected signal 1

672305 56 ar artypfacinfo.cc function arTypFacInfoGetLengthByCommand : command out of range 1

672306 57 ar artypfacinfo.cc function arTypFacInfoGetLengthByCommand : length too long 1

682745 58 ar arlibcppmem.cc Tried to free memory with arLibHeapFree() that was not allocated with arLibHeapAlloc(). 1

702268 59 ar arlibtaxmult.cc Overflow in tax multiplication. Param 1: Overflow value Param 2: Argument a Param 3: Argument b 1

704062 60 ar arlibtimer.cc The instance pointer does not point to this timer anymore, maybe the memory has been freed! 1

708386 61 ar artermidc.cc The conversion from TpTermIdC to ArTermIdC was not possible because the size of the TpTermIdC exceeds the maximum size of ArTermIdC 1

713829 62 ar arlibmemsecure.cc

Over-writer prevented. P1 = which function (memcpy, strcpy, strcat, etc.) P2 = Destination buffer size P3 = Attempted write size p1: 06050305 error in snprintf_s() 06050306

error in sprintf_s() 06070101 error in memcpy_s() 06070102 error in memmove_s() 06070103 error in strcpy_s() 06070104 error in strncpy_s() 06070201 error in strcat_s()

06070202 error in strncat_s() All the secure functions are implemented according ISO/IEC TR 24731-1:2007. For Details about what failed have a look at the appropriate function

in the source file. The error happend most likely due to wrong/invalid data passed to the function. 5

730988 63 ar arlibtimer.cc The canceled timer does not contain the correct expiry pointer. 1

737195 64 ar arlibssl.cc Invalid lock number. 1

737196 65 ar arlibssl.cc Invalid number of locks requested. 1

737979 66 ar smliclicencemanagerc.cc Software Release licence not valid 4

750282 67 ar arlibidpool.cc idPool identified with a NULL-Pointer 1

756020 68 ar arlibstr.cc in function arLibCatAndShiftStr() The size of the destination string is too small 1

756021 69 ar arlibstr.cc in function arLibCatAndShiftStr() The size of the destination must be larger than 0 1

756022 70 ar arlibstr.cc in function arLibEstrcpy() At the end of the copy process the source string must be EOS, otherwise not all characters were copied! 1

756187 71 ar arvntfeature.cc Definitive activation licence missing. 7

756188 72 ar arvntfeature.cc Definitive activation licence now present 2

756189 73 ar arvntfeature.cc Temporary activation period expires on <date> - param 1 is the date in format ddmmyyyy. 2

784452 74 ar arlibtimer.cc Couldn't start timer. No tmoId was returned. Param 1: procId, Param 2: timout in ms 2

784453 75 ar arlibtimer.cc timer not started because of a timeout of 0 ms. Param 1: procId, Param 2+3: procName 1

787557 76 ar arvntfeature.cc The CS enters the restricted mode. Param1 --> cause: 0 = no valid licence 1 = dongle satellite lost 1

787558 77 ar arvntfeature.cc The CS leaves the restricted mode. 1

741777 1001 bgui bguiinfinterfaceprocc.cc The length of the temperature string is to long Param1: string length Param2: 0 Param3: 0 1

763534 1002 bgui pri/manager/dispapi/lcdhal/lcdhal.cc A470 display: HW version of display and LCD controller type do not match (ILI9163B requires HW version 0 or 1, ST7735S requires HW version 2 and higher. Parameter 1: HW 1

628226 2001 os osl2imbinet.c 1) a unknown Minor has been received by the process osL2iMBIProc 2) parameter1 contains the received MajorMinor as UInt16. 1

628262 2002 os osl2ipplink.c the error id is used for severe errors in the process l2iPPILM with the use of parameters as follows: UInt32 parameter0, UInt32 parameter1, UInt32 parameter2): 0:enum 1

628264 2003 os osmem.c The memory root pointer and its contents is not correct 1

628265 2004 os osmem.c The memory root pointer has been reentered during 'entryCheck' 1

628266 2005 os osmem.c The memory root pointer has been reentered during 'exitCheck' 1

628267 2006 os osmem.c The assumed block address is smaler than the memory root pointer 1

628268 2007 os osmem.c System reset while modifying free list of this memory root pointer 1

628269 2008 os osmem.c The memory root pointer and its contents is not correct for allocating a new memory block 1

628270 2009 os osmem.c The address of buf is to small for to free in the memory 1

628271 2010 os osmem.c The assigned buf is not used or overwitten for to free in the memory 1

628272 2011 os osmem.c Either buf size or buf pointer wrong for to free in the memory 1

628273 2012 os osmem.c <osMemGetAllocated> is never called parameter first = TRUE 1

628274 2013 os osmem.c <osMemGetAllocated> is never called parameter first = TRUE or memory modified while getting allocated 1

628275 2014 os osmem.c Unproper datablock found, or block too large 1

628279 2015 os osmem.c The memory root pointer and its contents is not correct for free a memory block 1

628283 2016 os osl2ipperr.c

the error ID 2016 is used to monitor different errors indication weird circumstances eg. unexpected identifiers and states and signals etc. use of parameters is as follows: UInt32

parameter0: enum 'what error' UInt32 parameter1: enum 'function' the error occurred in UInt32 parameter2: erroneous value. 1

628360 2017 os ostmoserver.c Error has been detected in the OS timeout server 1

628495 2018 os The same OSE process Id is already in 1

628496 2019 os osprocname.c The same OSE process name is already in the OSE process name list 1

628497 2020 os osprocname.c No more free place in the process name list. Check whether a) OseMaxProcs is sufficient, b) killed OSE processes deleted their entries 1

628787 2021 os ospchlinkhandler.c the searched process is not found 1

628788 2022 os ospchlinkhandler.c Invalid access to process-list 1

628789 2023 os ospchlinkhandler.c Message is not sent by linkhandler 1

628790 2024 os ospchlinkhandler.c No relating process-index found 1

628791 2025 os ospchlinkhandler.c processname too long param0 = namelength param1 = max namelength 1

628792 2026 os ospchlinkhandler.c I haven't found a free place param0 = number of items in the list param1 = max number of items in the list 1

628793 2027 os ospchlinkhandler.c entity is already empty param0 = process-entity index 1

628794 2028 os ospchlinkhandler.c There is already a signal -> free it 1

628795 2029 os ospchlinkhandler.c I have not found a free place in the relation list param0 = number of items in the list param1 = max number of items in the list 1

628796 2030 os ospchlinkhandler.c entity is already empty 1

628797 2031 os ospchlinkhandler.c try to access the p-channel on a single-board system 1

628798 2032 os ospchlinkhandler.c Current process is not in the list 1

628799 2033 os ospchlinkhandler.c process not found on this board 1

628800 2034 os ospchlinkhandler.c new index for the same process param0 = old index param1 = new index 1

628801 2035 os ospchlinkhandler.c I haven't found the requested procId anymore 1

628802 2036 os ospchlinkhandler.c no signal found to send back to client 1

628803 2037 os ospchlinkhandler.c calling/called process is not known param0 = sender process index param1 = receiver process index 1

628804 2038 os ospchlinkhandler.c message is too long param0 = size of the message param1 = max size of the message 1

628805 2039 os ospchlinkhandler.c entry is not found on my side param0 = sender process index param1 = receiver process index param2 = board id of the sender-board 1

628806 2040 os ospchlinkhandler.c a wrong bi was assumed param0 = assumed board identifier param1 = assigned board identifier 1

628807 2041 os ospchlinkhandler.c Wrong P-Channel Minor received param0 = received minor 1

628808 2042 os ospchlinkhandler.c unexpected minor param0 = received minor 1

628809 2043 os ospchlinkhandler.c Wrong P-Channel Major received param0 = received major 1

628810 2044 os ospchlinkhandler.c Wrong Minor received param0 = received minor 1

628811 2045 os ospchlinkhandler.c Wrong Major received param0 = received major 1

629210 2046 os osetosv.c tmo_struct.sig == NULL 1

629211 2047 os osetosv.c *tmo_struct.sig != tmo_struct.sig_no 1

629212 2048 os osetosv.c tmo_struct.sig not in pool 1

629236 2049 os oslinkhandler.c osConveyMsgToPort: invalid portref 1

629273 2050 os osemlib.c Somebody wrote into this buffer while it was in the OS free list 1

629274 2051 os osemlib.c Somebody wrote into this buffer while it was in the OS free list 1

629275 2052 os osemlib.c Somebody wrote into this buffer's not used area while it was in the OS in use list 1

629643 2053 os osehack.c func oseGetFreeBufs: freelist contains odd next-ptr; show sender part in p1, p2 and p3 1

629644 2054 os osehack.c func oseGetFreeBufs: freelist contains odd next-ptr; show addressee part in p1, p2 and p3 1

629645 2055 os osehack.c func oseGetFreeBufs: freelist contains odd next-ptr; save sigSize, SigNo and 8 bytes of content of buggy signal 1

630054 2056 os osmasynchbridge.cc Error Mapping OsbxMenuEnuC to MaTbxMenuEnuC - undefined value 1

630164 2057 os oslibsemc.cc pron blem with semaphore: the region is already unprotected 1

630447 2058 os oshdlerror.cc CPM error vector 0x00 called: The CPM requested an interrupt that the user masked before the core serviced it and no other interrupts for the CPM are pending. 1

630507 2059 os ostrcprocess.cc no spare entry to record new task name 1

630510 2060 os oslibhack.cc could not find pcb of pid 1

630582 2061 os ostrcprocess.cc timestamp of process- or interrupt-swap have identical values 1

630652 2062 os oslibosemem.cc size of requested buffer is larger than OseMaxBufSize 1

630689 2063 os oslibhack.cc In osLibRestoreToProc() when a signal is not owned by the process trying to change ownership we generate this error, of severity crash, to capture the proc ids. Initially created 1

630694 2064 os oslibosemem.cc The biggest block make a mem leak, to find who is allocating them , we make an error log 1

630760 2065 os oslibhack.cc Corrupted signal header or signal administration block P1 = buffer ptr, P2 = ptr to MMS header, P3 = ptr to admin header 2

630761 2066 os oslibhack.cc Inconsistency in buffer pool. The pool appears to be corrupted. P1 = ptr to admin block, P2 = Magic number, P3 = 0 1

630919 2067 os ososertcc.cc The given SysDateTimeRec is not valid, so the oseRtcSettime is not done. time not valid: p1 = hour p2 = minute p3 = second 2

631091 2068 os oslibhack.cc a buffer header has been overwritten. search for previous buffer has completed. find in stack dump of the crashlog information of the previous buffer which is probably the one 1

631127 2069 os osmonheapproc.cc unknown major signal received 1

631241 2070 os oslibhack.cc std::terminate() was called. 1

653496 2071 os ososertcc.cc A function to set date/time was called from an interrupt process. This is not allowed. date/time was not set. Parameter 1 shows the process-Id of the calling process. 2

669973 2072 os startudppdr.cc Link handler hasn't been started because database access failed. 1

681228 2073 os init_flash.cc

It was tried to mount the filesystem with parameter "validate" but this failed. In this case the filesystem is in readonly mode which is catastrophic. The filesystem was unmounted

and mounted again without parameter "validate". "validate" does some kind of chkdisk on the filesystem and there was a problem detected in the filesystem structure (unknown

what exactly). Mounting the filesystem without "validate" just hides the problems, it might cause problems on the filesystem later on. The only way to fix this is reformatting the

filesystem. Parameter 1: errno Parameter 2: hardware unit (0 or 1 for MBS/MBL, always 0 for MBA) 4

681445 2074 os oslnhinterfacec.cc huntProc() failed - hunt signal was not returned in time. 1

682791 2075 os oslibosemem.cc Tried to free memory with arLibHeapFree() that was not allocated with arLibHeapAlloc(). 1

682792 2076 os oslibosemem.cc Tried to free memory with osOseHeapFree() that was not allocated with osOseHeapAlloc(). 1

684532 2077 os oslibosemem.cc Tried to reallocate memory with osOseHeapRealloc() that was not allocated with osOseHeapAlloc(). 1

685348 2078 os oslibosemem.cc You can't allocated heap memory yet as the heap isn't initialised. Please come back later, or use signal pool memory instead. 1

685484 2079 os oslibosemem.cc Called osLibHeapMakeBufMaxSize() on a buffer that was not from the heap 1

685523 2080 os oslibhack.cc NULL pointer problem in osLibGetUserAllocSize(). Either the passed pointer is NULL or the header pointer is NULL. Check the parameters for more details. 1

699415 2081 os smsysmain.cc Initialisation of the program handler (PRH) for loading modules failed due to the following reason: 1 = initialisation of MMS failed, 2 = initialisation of file archive server (ASF) failed, 2

699497 2082 os osinidomain.cc Unable to allow access to heap extension. The system will crash wit an MMS error in case memory in the heap extension will be accessed 1

701380 2083 os osprhmanagerc.cc Loadmodule could not be loaded. Parameter 1 = status, Parameter 2 & 3 = first part of name of loadmodule 1

701383 2084 os osprhmanagerc.cc Loadmodule could not be started. Parameter 1 = status, Parameter 2 & 3 = first part of name of loadmodule 1

702228 2085 os osprhmanagerc.cc The directory where loadmodules are stored (/loadmodule per default) does not exist 1

702870 2086 os osprhmanagerc.cc The RELEASE or TARGET information of the link unit does not match the RELEASE or TARGET of the main unit. Parameter 1 contains the name of the link unit, Parameter 2 if its a 2

703351 2087 os osprhmanagerc.cc no valid entry "OSE_LM_RELEASE=" found in elf-header of loadmodule (defined in <xy>loadmodule.def) 1

703352 2088 os osprhmanagerc.cc no valid entry "OSE_LM_TARGET=" found in elf-header of loadmodule (defined in <xy>loadmodule.def) 2

703353 2089 os osprhmanagerc.cc no valid entry "OSE_ELF_MAIN_START=" found in elf-header of loadmodule (defined in <xy>loadmodule.def) 1

703354 2090 os osprhmanagerc.cc no valid entry "OSE_ELF_FILE_OFFSET=" found in elf-header of loadmodule (defined in <xy>loadmodule.def) 1

703355 2091 os osprhmanagerc.cc no valid entry "OSE_LM_MAIN_NAME=" found in elf-header of loadmodule (defined in <xy>loadmodule.def) 1

703550 2092 os osprhmanagerc.cc The loaded link unit does not match the BOARD identifyer of the PBX. Parameter 1 contains BOARD identifyer of link unit 1

703552 2093 os osprhmanagerc.cc no valid entry "OSE_LM_BOARD=" found in elf-header of loadmodule (defined in <xy>loadmodule.def) 1

709122 2094 os oslibtosv.cc Internal TOSV table contains duff expiry signal pointer after timer started. 1

712363 2095 os oslibosemem.cc Free size different from requested size 1

714324 2096 os oshdlerror.cc An non-fatal ose error has occured which allows the application to continue without crashing. To exactly know what happened, this errorReport indicates the reason of the ose 1

714749 2097 os oslibosemem.cc Process calling osOseHeapFree() does not own the memory. P1=Calling Process P2=Owner P3=Pointer to memory 1

715447 2098 os oslibosemem.cc The limit for logging created/extended pools prior the MEL (memory extension logger)is fully working is exceeded! Param1 = exceeded limit. Adapt MaxPoolsPriorHeapStart if 1

726539 2099 os ostrcperfmeterdump.cc could not create directory to store the perfmeter files p1: errno p2: 1 - /home/logs could not be created 2 - /home/logs/perf could not be created p3: 0 1

726540 2100 os ostrcpbxloaddump.cc could not create directory to store the pbx load dump files p1: errno p2: 1 - /home/logs could not be created 2 - /home/logs/load could not be created p3: 0 1

727640 2101 os osmonmemory.cc could not create directory to store the memory log files p1: errno p2: 1:/home/logs could not be created 2:/home/logs/memory could not be created p3: 0 3

730408 2102 os ososertchwprocc.cc For platform exist no RTC handling (see code). You have to implement one. 3

732139 2103 os osmonmemory.cc The request send to the memory manager wasn't successful 1

732140 2104 os osmonmemory.cc The run_shell_cmd to dump the heap per process wasn't successful 1

732640 2105 os ososertcc.cc Could not create /home/data directory to store timezone configuration file localtime.txt. The timezone configuration will not work without this configuration file. p1: errno 1

732653 2106 os oshdlerror.cc The TFTP server has reached its configured SW limits. Check if the SW limits needs adaptations. 1

733521 2107 os oslibhack.cc Information from a non existing memory pool was requested. Parameter 1 = number of existing pools, Parameter 2 = number of requested pool 1

734915 2108 os ososertcc.cc The configured timezone file is not valid/corrupt. Replace the file in filesystem ("/home/zoneinfo/..."). The original filename was renamed to filename_invalid. 2

737375 2109 os oslibhack.cc Definition for MaxOseProcessName is to small. Trying to copy a processname which exceeds MaxOseProcessName. Param1=size of desination buffer, param2=requested size to 1

738668 2110 os oshdlvector8377.cc Unable to enable all requested vector numbers at system startup for the previously disable vector numbers during installing the dda interrupt drivers. For more information see the 1

743663 2111 os oslibosemem.cc Trying to allocate heap memory in an interrupt- or timerinterrupt process. This may lead to a crash. Param 1 = process type, Param 2 = PID, Param 3 = alloc size 1

743664 2112 os oslibosemem.cc Trying to re-allocate heap memory in an interrupt- or timerinterrupt process. This may lead to a crash. Param 1 = process type, Param 2 = PID, Param 3 = realloc size 1

743665 2113 os oslibosemem.cc Trying to free heap memory in an interrupt- or timerinterrupt process. This may lead to a crash. Param 1 = process type, Param 2 = PID, Param 3 = heap buffer pointer 1

758919 2114 os osutiearlyfailureproc.cc

Any kind of hardware failure. The 3rd parameter (p3) describes the problem. p1 = errorid 2114 p2 = 1 p3 1 : Ramdisk not available, restart system 2 : Failed to mount a

volume, see ramlog for more information 3 : Failed to resolve a volume, see ramlog for more information 4 : Failed to format a volume, see ramlog for more information 5 : File

system not available, see ramlog for more information 6 : Validation of the volume failed (chkdsk failure), see ramlog for more information 7 : Volume "/home" terminated, file

system no longer available, replace CF Card 8 : Volume "/ram" terminated, ramdisk no longer available, restart system 4

759196 2115 os ososertcc.cc The given SysDateTimeRec is not valid, so the oseRtcSettime is not done. date not valid: p1 = day p2 = month p3 = year 1

766002 2116 os oslibhack.cc could not reduce process priority of heapd: P1=PID, P2=prio after change request, P3=requested prio 1

766003 2117 os oslibhack.cc could not restore process priority of heapd: P1=PID, P2=prio after change request, P3=requested prio 1

766037 2118 os oslibhack.cc the process name does not fit in the available name buffer, P1=length of process name, P2=size of name buffer, P3=PID related to process name 1

766038 2119 os oslibhack.cc To many ose_heap* PID's to handle. The size of the array to store these PID's is to small. P1=number of PID's to store, P2=Maximum allowed number of PID's 1

767234 2120 os ostrcperfmeterdump.cc Could not write the perfmeter interval value to the configuration file /home/data/perfmeter.txt. p1: status of arLibSetAttributeValue (GetAttributeStatus) p2: interval p3: - 1

767235 2121 os ostrcperfmeterdump.cc Could not write the perfmeter limit value to the configuration file /home/data/perfmeter.txt. p1: status of arLibSetAttributeValue (GetAttributeStatus) p2: limit p3: - 1

767236 2122 os ostrcperfmeterdump.cc Could not create the directory to store the perfmeter log files. p1: errno p2: 1 = /home/logs 2 = /home/logs/perf p3: - 1

767237 2123 os ostrcpbxloaddump.cc Could not create the directory to store the load log files. p1: errno p2: 1 = /home/logs 2 = /home/logs/load p3: - 1

767238 2124 os ostrcpbxloaddump.cc Unknown reason value for load recording. p1: reason (TPbxLoadDumpEnum) p2: - p3: - 1

767540 2125 os oslibhack.cc we have found more heap PID's than we can store in array outPidArr. Parameter 1: found PID's, Parameter 2: max. allowed PID's 1

767541 2126 os oslibhack.cc could not find ose_memory_mgr 1

767542 2127 os oslibhack.cc could not restore origin priority of ose_memory_mgr. Parameter 1: PID, Parameter 2: new priority, Parameter 3: old priority 1

786467 2128 os ostrccopylogfiles.cc could not copy last N lines from /var/log/messages to PBX_HOME_DIR/crash/messages.log. Shell command returned with exit code in parameter 1, number of lines to copy in 2

786684 2129 os core_if/os/oslnhsupervision.cc LnhStartPeerSupervision signal received, but the requested node is not active or the node id is not within the allowed range. We probably did not receive a previous 2

786685 2130 os core_if/os/oslnhsupervision.cc LnhPeerInactive signal received, but the requested node is not active or the peer node is not within the allowed range. We probably never received a previous LnhAddPeerNode 2

741776 3001 mscu mscumspmanager.cc MSCU VAPI init failed -> EIP1 modules can not be used Param1: VAPI Result Error Code Param1: - Param1: - 1

755280 3002 mscu mscumspmanager.cc Could not close the sw directory stream while loading the EIP1 firmware. 1

628134 4006 sm mamonconv.cc String has been cut in length for monitor-output 2

628136 4007 sm smmonreport.c too long string 1



628180 4010 sm smtstselft.c Unknown signal minor. 1

628185 4011 sm smtstselft.c Unknown signal Major 1

628188 4012 sm smsyswatchdog.c Unknown signal Minor in process smSysWdogProc 1

628189 4013 sm smsyswatchdog.c Unknown Major received in watchdog process 1

628190 4014 sm smsyswatchdog.c Suspend time for watchdog supervision to long 1

628191 4015 sm smsyswatchdog.c The watchdog datastructure is not able to support a further process supervision ==> enhance the constant MaxSupervisedProcesses by 1 1

628192 4016 sm smutiwatchdog.cc A watchdog supervised process did not answer - p1, p2: first 8 chars (in hex) of process name, p3: process priority (in hex). 4

628193 4017 sm smsyswatchdog.c A process trys multiple times to suspend the watchdog supervision 1

628194 4018 sm smsyswatchdog.c A watchdog reestablish received of an unknown process 1

628195 4019 sm smsyswatchdog.c A watchdog suspend timeout received of an unknown process 1

628237 4020 sm errcont.c Old Office stile error message received 1

628289 4021 sm smsysmain.c Unexpected control content of Minor ModMncInfoInd 1

628290 4022 sm smsysmain.c Unknown signal Minor of MajorMod in system main process 1

628291 4023 sm smsysmain.c Unknown signal timeout Minor in system main process 1

628292 4024 sm smsysmain.c Unknown Major received in system main process p1: sender process id p2: signal major p3: signal minor 2

628301 4025 sm smtstselft.c Function smTstTest is called with a wrong runstate 1

628302 4026 sm tbxmain.c Unknown Minor received in smTbxProc for MajorTbx 1

628303 4027 sm tbxmain.c Unknown Minor received in smTbxProc for MajorService 1

628304 4028 sm tbxmain.c Unknown Minor received in smTbxProc for MajorMod 1

628305 4029 sm tbxmain.c Unknown Major received in smTbxProc 1

628307 4030 sm smtstselft.c testfunction smTstTest is called with state out of enum RunstateType 1

628319 4031 sm smsyswatchdog.c Attempt to initiate the watchdog SW process supervision a second time 1

628333 4032 sm smsyswatchdog.c Attempt to initiate a second time the Ose priority level of the SW watchdog process supervision 1

628357 4033 sm tbxmainmenu.c TBX Menu title not contained in variable tbxMainMenu 1

628363 4034 sm smerrmain.c 1

628364 4035 sm smerrmain.c Unknown signal Minor in system error process 1

628489 4036 sm smsysmain.c Unknown signal Minor of MajorEset in system main process 1

628491 4037 sm smsysmain.c SRAM-PCMCIA for KDM-variables is not plugged in 1

628492 4038 sm smsysmain.c 100% PCMCIA-SRAM test failed after firststart 1

628498 4039 sm smmt0mon.c in process unknown major received. 1

628499 4040 sm smmtomon.c unexpected minor 1

628549 4041 sm l3imt1.c The messages 'set maintenance', 'set out of order', and 'set urgent out of order' are not allowed until the card is running normally (ie only CPU LED blinking after 'set in service' or 1

628550 4042 sm l3imt1.c Invalid message received in information element Change Status 1

628551 4043 sm l3imt1.c The message length of StatusAck is to long 1

628552 4044 sm l3imt1.c TvaId is not valid or not supported 1

628581 4045 sm smmt0.c untreated minor received in main . 1

628582 4046 sm smmt0.c mt0 message received with illegal sapi or PD 1

628633 4049 sm smsysboard.c Alarm: PCB Missing / Faulty 1

628635 4052 sm scmanioerror.c Alarm: CDA > Printer blocked 1

628636 4053 sm ma/maerrcont.cc Alarm: Malfunction generate alarm if too many messages in 1 hour p1: errorID p2: SWErrId p3: not used 2

628649 4056 sm smsysversiontransfer.c First start due to other country SW plugged on as before 1

628650 4057 sm smdect.c Only 1 DECT Master and one DECT slave board allowed in i4Cl project. 1

628666 4058 sm smsysboard.c The DectIf does not exist at the hardware level. Mo specific harcan be DECT. 1

628669 4060 sm errcont.c Alarm: High number of alarms 1

628687 4061 sm ma/maalsspooler.cc Loc alarm dest not avail 2

628688 4062 sm ma/maalsspooler.cc Rem alarm dest not avail 2

628691 4063 sm smtstselft.c Selftest-Error: 020 --> +48V Speisungsfehler 1

628692 4064 sm smtstselft.c Selftest-Error: 021 --> -40V Speisungsfehler 1

628693 4065 sm smtstselft.c Selftest-Error: 022 --> -5V Speisungsfehler 1

628694 4066 sm smtstselft.c Selftest-Error: 100 --> EPIC reagiert nicht 1

628695 4067 sm smtstselft.c Selftest-Error: 101 --> MUSAC antwortet nicht 1

628696 4068 sm smtstselft.c Selftest-Error: 102 --> ZFK reagiert nicht 1

628697 4069 sm smtstselft.c Selftest-Error: 103 --> SSA reagiert nicht 1

628698 4070 sm smtstselft.c Selftest-Error: 104 --> B-Kanal-Mux funktioniert nicht 1

628699 4071 sm smtstselft.c Selftest-Error: 105 --> RESA reagiert nicht 1

628700 4072 sm smtstselft.c Selftest-Error: 106 --> Uhr ist nicht einstellbar 1

628701 4073 sm smtstselft.c Selftest-Error: 107 --> Uhr laeuft nicht 1

628702 4074 sm smtstselft.c Selftest-Error: 200 --> PC-Card 1 schreibgeschuetzt 1

628703 4075 sm smtstselft.c Selftest-Error: 201 --> PC-Card 2 schreibgeschuetzt 1

628704 4076 sm smtstselft.c Selftest-Error: 202 --> PC-Card 1 beschaedigt 1

628705 4077 sm smtstselft.c Selftest-Error: 203 --> PC-Card 2 beschaedigt 1

628706 4078 sm smtstselft.c Selftest-Error: 204 --> PC-Card 1 reagiert nicht 1

628707 4079 sm smtstselft.c Selftest-Error: 205 --> PC-Card 2 reagiert nicht 1

628708 4080 sm smtstselft.c Selftest-Error: 206 --> PC-Card waehrend Kopieren entfernt 1

628709 4081 sm smtstselft.c Selftest-Error: 207 --> falsche PC-Card in 1 1

628710 4082 sm smtstselft.c Selftest-Error: 208 --> falsche PC-Card in 2 1

628711 4083 sm smtstselft.c Selftest-Error: 209 --> ungueltige Daten auf PC-Card 1

628712 4084 sm smtstselft.c Selftest-Error: 210 --> Upload von PC-Card misslungen 1

628713 4085 sm smtstselft.c Selftest-Error: 211 --> Kopie zu PC-Card misslungen 1

628714 4086 sm smtstselft.c Selftest-Error: 212 --> Batterie PC-Card 1 entladen 1

628715 4087 sm smtstselft.c Selftest-Error: 213 --> Batterie PC-Card 2 entladen 1

628716 4088 sm hdtstmemorypbx955.cc Selftest-Error: The application (running in RAM) checksum failed. P1: 0 P2: 0 P3: 0 3

628717 4089 sm hdtstmemorypbx955.cc Selftest-Error: The boot-flash checksum failed, Parameter1=mem.begin, Parameter2=mem.end 2

628718 4090 sm smtstselft.c Selftest-Error: 502 --> Reserve 1


628720 4092 sm smtstselft.c Selftest-Error: 504 --> Programmfehler nach Aufstarten 1

628721 4093 sm smtstselft.c Selftest-Error: 505 --> DRAM SIMM fehlerhaft 1

628722 4094 sm smtstselft.c Selftest-Error: 506 --> RPE antwortet nicht 1

628723 4095 sm smtstselft.c Selftest-Error: 507 --> Interruptsystem defekt 1

628724 4096 sm smtstselft.c Selftest-Error: 508 --> SIM60 antwortet nicht 1

628725 4097 sm smtstselft.c Selftest-Error: 509 --> CPM antwortet nicht 1

628729 4098 sm smtstselft.c Selftest-Error: 401 --> KDM-Backup failed 1




628736 4102 sm errcont.c UNKNOWN REQUEST was passed to function smErrHandleSelfTestRequests 1

628737 4103 sm errcont.c NO MAPPING (errorid --> user-doc errorid) available for the given errorid 1

628738 4104 sm ma/maalsspooler.cc Unexpected alarm spooler event 2

628739 4105 sm ma/maalsspooler.cc Illegal alarm spooler state 2

628740 4106 sm ma/maalsspooler.cc Illegal alarm spooler event 2

628741 4107 sm ma/maalsspooler.cc Illegal alarm spooler destination 2

628742 4108 sm ma/maalsspooler.cc Corrupt alarm spooler list 2

628749 4109 sm smsysmain.c First start due to BCS8 SW does not meet PLATFORM_BCS8V2 MUP HW coding 1

628750 4110 sm smsysmain.c First start due to BCS4 SW does not meet PLATFORM_BCS8V2 MUP HW coding 1

628760 4111 sm smsysmain.c Alarm: Power loss 1

628813 4112 sm smsyssynch.cc Synch loss on trunk alarm 2

628819 4113 sm l3imt1.c It was not possible to suspend the l3iMt1Proc from the watchdog. 1

628820 4114 sm l3imt1.c It was not possible to reestablish the normal watchdog supervision of the l3iMt1Proc. 1

628854 4115 sm smsysboard.c Alarm: Too many exchange lines 1

628942 4116 sm errcont /* too much interrupt processes swapped in */ /* increase PerfmeterIdStackSize else you'll get */ /* error informations */ 1

628943 4117 sm errcont /* a normal process has swapped in : */ /* there is still a interrupt process running or */ /* int-process has not called <errTraceIntEndProc> */ 1

628944 4118 sm errcont /* too much interrupt processes swapped out */ /* check calls of errTraceProc with NULL as param */ 1

628955 4119 sm smsysboard.c PSA switched off 1

628956 4120 sm smsysboard.c PSA switched off 1

629128 4121 sm tbxmain.c unexpected MajorDlSkt signal received 1

629142 4122 sm errcont.c Unknown error ID error ID not associated to an alarm 1

629149 4123 sm smalsspooler.c The spooler language is not defined or unknown. 1

629204 4124 sm l3imt1.c Cannot set default language for this country. 1

629234 4125 sm smmonreport.c corrupt indexes in the ibustrace recording or dumping 1

629241 4126 sm smsysboard.c Alarm: subscriber numbers missing 1

629281 4127 sm smmonreport.c corrupt pointers in the ibustrace recording or dumping 1

629301 4128 sm tbxio.c tbstr has overwritten the following variable (see br5198 and others) 1

629344 4129 sm smsyswatchdog not supervised prozess tries to suspend from supervision 1

629352 4130 sm smsyswatchdog.c A watchdog suspend timeout expired of a previous suspended */ /* process, but the process did not reestablish the process will be back under supervision p1+p2 = name 1

629419 4131 sm errcont.c It was not possible to establish a P-Channel connection using the OSE linkhandler functionality. Therefore the alarm could not be forwarded to the central board (zee). Probably the 1

629463 4132 sm scioh.c mistake - not a valid error 1

629522 4133 sm smtsttestmonitor.c Error message for test purpouses 1

629829 4134 sm smtsttestmonitor.cc Just for testing 1

629869 4135 sm smtstselft.c Selftest-Error: 21 --> uC fehlerhaft 1

629870 4136 sm smtstselft.c Selftest-Error: 22 --> Dsp reagiert nicht 1

629871 4137 sm smtstselft.c Selftest-Error: 23 --> HDLC reagiert nicht 1

629872 4138 sm smtstselft.c Selftest-Error: 24 --> RESA reagiert nicht 1

629873 4139 sm smtstselft.c Selftest-Error: 25 --> RTC reagiert nicht 1

629874 4140 sm smtstselft.c Selftest-Error: 26 --> Interruptsystem defekt 1

629875 4141 sm smtstselft.c Selftest-Error: 31 --> Genereller DRAMfehler 1

629876 4142 sm smtstselft.c Selftest-Error: 32 --> DRAM Bank 1 fehlerhaft 1




629880 4146 sm smtstselft.c Selftest-Error: 41 --> Keine Applikation vorhanden 1

629881 4147 sm smtstselft.c Selftest-Error: 42 --> Checksumme Bootsoftware fehlerhaft 1

629882 4148 sm smtstselft.c Selftest-Error: 43 --> Checksumme Applikation fehlerhaft 1

629883 4149 sm smtstselft.c Selftest-Error: 44 --> Keine Lizenz vorhanden 1

629884 4150 sm smtstselft.c Selftest-Error: 45 --> Software-Versione-Transfer fehlerhaft 1

629885 4151 sm smtstselft.c Selftest-Error: 51 --> Port 0.1 fehlerhaft 1














629899 4165 sm smtstselft.c Selftest-Error: 71 --> Falsches Modul in Oapmslot 1

629900 4166 sm smtstselft.c Selftest-Error: 72 --> Falsches Modul in linkem Erweiterungsslot 1

629901 4167 sm smtstselft.c Selftest-Error: 73 --> Falsches Modul in rechtem Erweiterungsslot 1

629902 4168 sm smtstselft.c Selftest-Error: 74 --> Unbekanntes oder defektes Modul in Oapmslot 1

629903 4169 sm smtstselft.c Selftest-Error: 75 --> Unbekanntes oder defektes Modul in linkem Erweiterungsslot 1

629904 4170 sm smtstselft.c Selftest-Error: 76 --> Unbekanntes oder defektes Modul in rechtem Erweiterungsslot 1

629933 4171 sm smdect.c Dect license couldn't be set because the hunt on p-channel hadn't worked. 1

629997 4172 sm smsyn.cc unknown signal Minor of MajorMod received in smSynSynchProc 1

629998 4173 sm smsyn.cc unknown signal Minor of MajorSysMgr received in smSynSynchProc 1

629999 4174 sm smsyn.cc unknown signal Minor of MajorModTmo received in smSynSynchProc 1

630000 4175 sm smsyn.cc unknown signal Major received in smSynSynchProc 1

630008 4176 sm smsysmain.c unexpected update license command received 1

630051 4177 sm smmasynchbridge.cc Error Mapping SmTbxMenuEnuC to MaTbxMenuEnuC - undefined value 1

630062 4178 sm smmasynchbridge.cc error mapping SmSysAuxStateArtEnuC to MaSysAuxStateArtEnuC 1

630063 4179 sm smmasynchbridge.cc error mapping MaSysAuxStateArtEnuC to SmSysAuxStateArtEnuC 1

630122 4180 sm sm/smxasynchbridge.cc cannot map smMonTestFlagEnuC to XaMonTestFlagEnuC 1

630237 4181 sm smsysmain.cc Attempt to access SM configuration data before startup complete 1

630279 4182 sm smcfgcbspecinserts.cc Singleton platform object does not exist 1

630280 4183 sm smcfgccbrdinserts.cc Singleton platform object does not exist 1

630281 4184 sm smcfgpmodinserts.cc Singleton platform object does not exist 1

630282 4185 sm smcfgpstspecinserts.cc Singleton platform object does not exist 1

630283 4186 sm smcfgcbspecinserts.cc Unable to create circuit board spec. 1

630284 4187 sm smcfginit.cc Unable to create singleton platform object. 1

630285 4188 sm smcfgccbrdinserts.cc Circuit board without spec 1

630286 4189 sm smcfgccbrdinserts.cc getAvailability() called on non-module 1

630287 4190 sm smcfgccbrdinserts.cc remove() called on non-module 1

630288 4191 sm smcfgccbrdinserts.cc restore() called on non-module 1

630289 4192 sm smcfgccbrdinserts.cc setInService() called on non-module 1

630290 4193 sm smcfgccbrdinserts.cc setOutOfServiceAlarmed() called on non-module 1

630291 4194 sm smcfgpportinserts.cc physical port with invalid location id 1

630292 4195 sm smcfgpmodinserts.cc physical module with invalid location id 1

630293 4196 sm smcfgcportinserts.cc configured circuit board with invalid location id 1

630294 4197 sm smcfgccbrdinserts.cc configured module with invalid location id 1



630297 4200 sm smcfgptspecinserts.cc Singleton platform object does not exist 1

630298 4201 sm smcfgannounce.cc Physical module with no circuit board spec 1

630299 4202 sm smcfgccbrdinserts.cc Physical module with no circuit board spec 1



630302 4205 sm smcfgpmodinserts.cc Physical module with no circuit board spec - param1: circuit board type, param2: nodeId, param3: slotId 3

630303 4206 sm smcfgpmodinserts.cc Physical module with no circuit board spec 1

630304 4207 sm smcfgannounce.cc Main board with no circuit board spec 1

630305 4208 sm smcfgannounce.cc Configured module with no circuit board spec 1

630306 4209 sm smcfgccbrdinserts.cc Configured module with no circuit board spec 1

630307 4210 sm smcfgccbrdinserts.cc Configured circuit board with no circuit board spec 1




630311 4214 sm smcfgccbrdinserts.cc Physical module missing at location 1

630312 4215 sm smcfgcportinserts.cc configured port with invalid port sub-type 1

630313 4216 sm smcfgcportinserts.cc configured port with invalid port sub-type 1

630314 4217 sm smcfgcportinserts.cc port sub-type with invalid port type 1






630320 4223 sm smcfgpportinserts.cc port sub-type with invalid port type 1

630321 4224 sm smcfgpportinserts.cc port sub-type with invalid port type 1

630322 4225 sm smcfgcportinserts.cc configured port with no link to configured circuit board 1



630325 4228 sm smcfgcportinserts.cc physical port with invalid port interface type 1

630326 4229 sm smcfgcportinserts.cc physical port with invalid port interface type 1

630327 4230 sm smcfgpportinserts.cc physical port with invalid port interface type 1

630328 4231 sm smcfgpportinserts.cc physical port with invalid port interface type 1

630329 4232 sm smcfgcportinserts.cc port interface spec with invalid port sub-type 1

630330 4233 sm smcfgcportinserts.cc port interface spec with invalid port sub-type 1

630331 4234 sm smcfgpportinserts.cc port interface spec with invalid port sub-type 1

630332 4235 sm smcfgpportinserts.cc port interface spec with invalid port sub-type 1

630333 4236 sm smcfgccbrdinserts.cc circuit board spec with no circuit board info 1

630334 4237 sm smcfgpmodinserts.cc circuit board spec with no circuit board info 1

630335 4238 sm smcfgcportinserts.cc port type spec with no port type info 1

630336 4239 sm smcfgpportinserts.cc port type spec with no port type info 1

630337 4240 sm smcfgcportinserts.cc port sub-type spec with no port sub-type info 1

630338 4241 sm smcfgpportinserts.cc port sub-type spec with no port sub-type info 1

630339 4242 sm smcfgannounce.cc configured circuit board with invalid location id 1

630340 4243 sm smcfgpportinserts.cc configured circuit board not created at location 1

630341 4244 sm smcfgannounce.cc platform has not been created 1





630346 4249 sm smcfginit.cc platform has not been created 1

630347 4250 sm smcfgccbrdinserts.cc unable to find configured circuit board 1

630348 4251 sm smcfgportservices.cc T0TrunkInterface specification has not been created 1

630349 4252 sm smcfgportservices.cc SBusExtension specification has not been created 1

630350 4253 sm smcfgpstspecinserts.cc port type spec not created 1

630351 4254 sm smcfgccbrdinserts.cc attempt to decrement circuit board type count below zero 1

630352 4255 sm smcfgcportinserts.cc attempt to decrement port sub-type count below zero 1

630353 4256 sm smcfgcportinserts.cc attempt to decrement port type count below zero 1

630354 4257 sm smcfgcportinserts.cc invalid BasicS port reconfiguration 1

630355 4258 sm smcfgcportinserts.cc invalid BasicT port reconfiguration 1

630356 4259 sm smcfgcportinserts.cc invalid PrimaryS2 port reconfiguration 1

630357 4260 sm smcfgcportinserts.cc invalid PrimaryT2 port reconfiguration 1

630358 4261 sm smcfgcportinserts.cc invalid port reconfiguration 1

630359 4262 sm smcfgdefaultconfig.cc attempting to create default config for a non-existent port 1

630360 4263 sm smcfgdefaultconfig.cc attempting to create default config for port with undefined interface 1

630361 4264 sm smcfginit.cc unable to create broadcast configured port 1

630362 4265 sm smcfginit.cc unable to find broadcast port interface spec 1



630365 4268 sm smcfginit.cc unable to create location 1

630366 4269 sm smcfginit.cc unable to create location 1

630367 4270 sm smcfginit.cc unable to create configured main board 1

630368 4271 sm smcfginit.cc unable to create configured virtual module 1

630369 4272 sm smcfginit.cc unable to create configured main board's software 1

630370 4273 sm smcfginit.cc unable to create physical module 1

630371 4274 sm smcfginit.cc unable to create physical port 1

630372 4275 sm smcfgpifspecinserts.cc unable to create port interface spec 1

630373 4276 sm smcfgpstspecinserts.cc unable to create port sub-type spec 1

630374 4277 sm smcfgptspecinserts.cc unable to create port type spec 1

630375 4278 sm

smcfgccbrdinserts.cc,

hdcmppgpmain.cc

smcfgccbrdinserts.cc configured circuit board not brought into service hdcmppgpmain.cc (A470) The service state of all module FPGAs are checked periodically. If the FPGAs has

lost its firmware (brownout) then this module is no longer operational See br58300: QA: Brownout of some FPGAs after a very short power failure - should we restart 3

630376 4279 sm smcfgcportinserts.cc configured port not brought into service 1


630378 4281 sm smcfginit.cc platform is not suitable for small base plate 1

630379 4282 sm smcfginit.cc platform is not suitable for large base plate 1

630380 4283 sm smcfginit.cc base plate type not known 1

630383 4284 sm smcfgannounce.cc Main board with no circuit board spec 1

630384 4285 sm smcfgannounce.cc Configured module with no circuit board spec 1

630385 4286 sm smcfgannounce.cc Physical module with no circuit board spec 1


630387 4288 sm smcfgpmodinserts.cc physical module with invalid location id 1

630388 4289 sm smcfgpmodinserts.cc configured module missing at location 1

630389 4290 sm smcfgpmodinserts.cc Configured module with no circuit board spec 1

630390 4291 sm smcfgpmodinserts.cc Physical module with no circuit board spec 1

630433 4292 sm smcfgcbspecinserts.cc unsupported HdAllModuleTypeEnum 1

630463 4293 sm smsmshdlcbus.cc An unsupported message was received. 1

630479 4294 sm smsysmain.cc Unknown signal minor of MajorConfChange received in smSysProc_ 1

630480 4295 sm smsmshdlcbus.cc Alarm: Module has reset This alarm is generated when the smSmsSrvProc process receives a "Module Has Reset" message from a module. 1

630506 4296 sm smsysmain.cc licence chip does not contain a valid feature block 1

630512 4297 sm smcfgmfspecinserts.cc Unable to create sm object "ModuleFamilySpec" 1

630686 4298 sm smtime.c Error in time/date conversion 1

630947 4299 sm smcfgpmodinserts.cc This SmCircuitBoardType doesn't exist. 1

631263 4300 sm smsysmain.c serial flash device not found or initialization failed. 1

635474 4301 sm smsysboard.c function give_trunk_group called with incompatible params UInt8 absPort (param1) and PortArt p_sort (param2). 1

637586 4302 sm smcfginit.cc MainBoard port order isn't compatible any more! That means you get problem with AIMS and version transfer. 1

643152 4303 sm smcfgsatdatac.cc Error inserting an element in a container (map) for satellite. 1

645279 4304 sm smcfgoutsidemoduleadm.cc Couldn't create a Location of an outside module. 1

645298 4305 sm smcfgoutsidemoduleadm.cc Couldn't create a PhysicalModule of an outside module. 1

645303 4306 sm smcfgoutsidemoduleadm.cc Couldn't create a PhysicalPort of an outside module. 1

645349 4307 sm smcfgoutsidemoduleadm.cc Couldn't find ConfiguredCircuitBoard of an outside module. 1

646857 4308 sm smsysmain.cc no isdn interface found to send the request to.. 1

647098 4309 sm smcfghdportservices.cc Only the local node is allowed to set synchro switches on the isdn trunk 1

647747 4310 sm smnwknoderegistrationc.cc Lost connection to master 2

647748 4311 sm smnwknoderegmanagerc.cc Lost connection to a satellite 2

647749 4312 sm smnwknoderegistration.cc Recovered connection to a satellite 1

647940 4313 sm smcfgccbrdinserts.cc Unable to destroy a satellite location because there is still linked a physical port or physical module.==> The module type (board type) changed on that slot! 2

648007 4314 sm smsyssymch.cc given portReference is not allowed to be a sync master 1

648029 4315 sm smsyssynch.cc the selected portRef is not a valid synch reference 1

648218 4316 sm smsyssynch.cc not a valid parameter for synchref has been passed 1

648431 4317 sm smsyssynch.cc tried to set a synch reference which is not on local node 1

648461 4318 sm smsyssynch.cc linkhandler failed to send to other nodes smSysSynchProc 1

648466 4319 sm smnwknoderegistration.cc Lost connection to a IP-Phone 1

648493 4320 sm smsyssynch.cc unexpected state for slip-interrupts 1

648494 4321 sm smsyssynch.cc unexpected state for timeouts 1

648987 4322 sm smsyssynch.cc Synch alarm new error id (previously:24006) as the alarm is generated in SM not in MA 1

649006 4323 sm smcfgmt1.cc in func smCfgGetRingPatterns() Reaching this branch of the code indicates a serious database problem! Temporarily we read the country info from the license chip information 1

650491 4324 sm smsyssynch.cc requested portref is not ISDN 1

650630 4325 sm smnwkpublicinterfacec.cc SmNwkPublicInterfaceC::getLocalIpAddresses() was called before a valid IP address was available for the mainboard ethernet port. 1

650642 4326 sm smnwkpublicinterfacec.cc SmNwkPublicInterfaceC::getLocalIpAddress() was called before a valid IP address was available for the mainboard ethernet port. 2

650783 4327 sm smnwkpublicinterfacec.cc could not get QoS Settings from IS-Domain 1

650817 4328 sm smnwkpublicinterface.cc link handler send failed while sending QoS Signal to active node 1

650968 4329 sm smcfgoutsidemoduleadm.cc storing module revision string with wrong locationId or string too long 1

652758 4330 sm smutiwatchdog.cc hardware driver signal contains wrong driver information 1

652872 4331 sm smutitimec.cc failed to send RTC time adjust to node 1

652881 4332 sm smcfginit.cc Software information object not found. 1

652895 4333 sm smsysmain.cc This signal is not allowed fot other systems than satellite 1

653406 4334 sm smcfgannounceaip6500c.cc Unable to update SmAIP6500Status. Parameter 1: Node ID Parameter 2: Slot ID Parameter 3: Board ID 1

653407 4335 sm smcfgannounceaip6500c.cc Unable to find/create SmAIP6500Status object. Parameter 1: Node ID Parameter 2: Slot ID Parameter 3: Board ID 1

653412 4336 sm smcfgannounceaip6500c.cc Unable to send InService message for AIP6500 to master. 3

653413 4337 sm smcfgannounceaip6500c.cc No configured circuit board found at location. Parameter 1: NodeId Parameter 2: SlotId 2

654231 4338 sm smcfgcportinserts.cc Try to remove this port ref but it isn't available in the NodeId map table. 1

654232 4339 sm smcfgcportinserts.cc This port ref is already available in the NodeId map table. 1

654980 4340 sm smsyssynch.cc This alarm is the counterpart of Alarm 4322. 4322 is generated when total synchronisation is lost of any digital trunk line in the system which are member of the synchronisation 1

654981 4341 sm smsyssynch.cc This ErrorId is the counterpart of Alarm 4112. Alarm 4112 is generated when a digital synch line looses its synchronisation (layer1 down). As soon as the line is available again this 2

656814 4342 sm smsysmain.cc An attempt to set the EIM swGeneration from ArVntSwGenerationUnknown to that of the current application was unsuccessful 2

657849 4343 sm smsysmain.cc Failed to create a default IP address block on the licence chip 1

658030 4344 sm smsysmain.cc The DHCP client was unable to obtain an IP address following a first-start - the DHCP client will be disabled and the mainboard ethernet port configured with the default IP 4

658032 4345 sm smsysmain.cc The DHCP client was either unable to obtain an IP address or could not retain an existing leased IP address - after a short delay (to avoid overloading the LAN), the DHCP client will 4

658113 4346 sm smsysmain.cc No response from the DHCP client during startup 2

658114 4347 sm smsysmain.cc IsEthInetReady signal was not received 1

658243 4348 sm smsysmain.cc Failed to create a feature block on the licence chip 1

659168 4349 sm smsysmain.cc SmNwkPublicInterfaceC::getIpAddress(nodeId) was called for a node which is not currently active 1

659188 4350 sm smnwkservicesc.cc Unable to start link handler because local IP address is not valid (either ArIpAddressC::Undef or the default value) 2

659586 4351 sm smcfgnode.cc tracing errorId: node settings have changed in smcfgnode.cc 1

660288 4352 sm smuittime.cc Date (year, month ,day) is not valid! 1

661000 4353 sm smutidstadjustment.cc in method handleMajorTgTiSignal() a unkown signal was received, see parameters for details about major and minor 1

661402 4354 sm smcfgannounce.cc Unable to create virtual module for smCircuitBoardType::IP_VirtualModule. 4

662252 4355 sm smcfgpstspecinserts.cc Database transaction failed 1

662253 4356 sm smcfgptspecinserts.cc Database transaction failed 1

662615 4357 sm smnwkpublicinterfacec.cc SmNwkPublicInterfaceC::getMacAddress(nodeId) was called for a node which is not currently active. 3

664104 4358 sm smnwkselfregcontextc.cc Unexpected event (param1) received in current state (param2) of SmNwkSelfReg state machine. 4

664105 4359 sm smnwknoderegcontextc.cc Unexpected event (param1) received in current state (param2) of SmNwkNodeReg state machine. 4

664892 4360 sm smnwknoderegmanagerc.cc Unable to send AnnounceRej signal to rejected satellite. - param1 is the reject cause (0: wrongSwVersion, 1: noAinLicence) - param2 contains equipmentId[12-19] - param3 5

664895 4361 sm smcfgannounceaip6500c.cc Unable to send CtrlAip6500ConfUpdate signal to AIP at nodeId (param1), slotId (param2). It might be that the Satellite (param1: nodeId) is not available, e.g. offline. 2

664896 4362 sm smcfgannounceaip6500c.cc Unable to send CtrlAip6500EthPortStateInd from AIP at nodeId (param1), slotId (param2) to master 1

664898 4363 sm smcfgannounceaip6500c.cc Unable to send CtrlAip6500RestartInd from AIP at nodeId (param1), slotId (param2) to master 1

664900 4364 sm smcfgannounceaip6500c CtrlAip6500RestartInd received from unknown AIP at nodeId (param1), slotId (param2). 1

665273 4365 sm smsmshdlcbus.cc send() failed when trying to get SW version of VM module. 1

665274 4366 sm smsmshdlcbus.cc Short reply from module when requesting SW version info 1

665348 4367 sm smsmshdlcbus.cc NULL address pointer! 1

666271 4368 sm smnwknoderegmanagerc.cc A satellite announceReq has been rejected. - param1 is the reject cause (1: wrongSwVersion, 2: noAinLicence, 3: invalidProduct, 4: noSecureVoIP) - param2 contains 6

667011 4369 sm smcfgoutsidemoduleadm.cc Attempt to send PortConfigSigS to satellite failed. - param1: locationId - param2: nodeId - param3: slotId 1

667124 4370 sm smsmshdlcbus.cc No reply to SW version request 1

667167 4371 sm smsmshdlcbus.cc Open failed 1

668691 4372 sm smnwkservicesc.cc An attempt to upgrade the EIM swGeneration to that of the current application was unsuccessful 1

671092 4373 sm smcfgpmodinserts.cc circuit board spec with no module family info 1

671682 4374 sm smnwkservicesc.cc The resource count for DSP device (nodeId, slotId, dspId) is zero 1

671797 4375 sm smnwkservicesc.cc VoIP/FoIP channels available but no corresponding DSP board 2

680585 4376 sm smliclicencemanagerc.cc Active alarm 'Temporary Offline Satellite Licences Expired' (see cr32851) 2

682254 4377 sm smnwknoderegmanagerc.cc PortStatus signal received from a satellite with no corresponding SmNwkNodeRegContextC instance 1

682256 4378 sm smnwknoderegmanagerc.cc PortConfigConfirm signal received from a satellite with no corresponding SmNwkNodeRegContextC instance 1

682257 4379 sm smnwknoderegmanagerc.cc InService signal received from a satellite with no corresponding SmNwkNodeRegContextC instance 1

682794 4380 sm smnwkservicesc.cc Unexpected minor for signal MajorSmNwkServices - param 1 is minor, param 2 is sender processId 4

682795 4381 sm smnwkservicesc.cc Unexpected minor for signal MajorFm - param 1 is minor, param 2 is sender processId 3

691859 4382 sm smcfgannounceaip6500c.cc No physical module instance found at location. Parameter 1: NodeId Parameter 2: SlotId 1

692193 4383 sm smnwkservicesc.cc Failed to set SmPhysicalModule.SwVersion for voicemail module. param1 : locationId of voicemail module 2

694588 4384 sm smnwknodereginservicestc.cc smCfgReceiveSatStatus() failed - param1: nodeId, param2: slotId, param3: boardType. 4

694589 4385 sm smnwkselfregstatussentstc.cc smCfgReceiveSatConfig() failed - param1: nodeId, param2: slotId, param3: boardType. 4

694590 4386 sm smnwknoderegportconfigsentstc.cc smCfgReceiveSatConfigConfirm() failed - param1: nodeId, param2: slotId, param3: boardType. 2

696625 4387 sm smcfgoutsidemoduleadm.cc PortStatus signal sent by satellite contained an invalid board type - param1: nodeId, param2: slotId, param3: boardType. 4

697780 4388 sm smnwknoderegannouncereqstc.cc Failed to send AnnounceAck signal to satellite - param1: nodeId. 1

699176 4389 sm smnwkselfregstatussentstc.cc Failed to receive a PortConfig signal for each board during satellite registration - param1: nodeId, param2: board count, param3: received signal count. 1

699626 4390 sm smsyssynch.cc Timeout waiting for reply to SynchStatusReq - param1: satellite nodeId 1

699652 4391 sm smsyssynch.cc Wrong function used to set a synch reference on local node - param1: portRef 1

702760 4392 sm smnwkselfregregisteredstc.cc smCfgReceiveSatConfig() failed - param1: nodeId, param2: slotId, param3: boardType. 1

707636 4393 sm smlictrialmanagerc.cc Failed to update the active trial licences in the database. 3

707637 4394 sm smlictrialmanagerc.cc Alarm: a trial licence has expired - param1 contains the trialLicenceId, which is a member of ArVntFeatureLicensingC::TrialLicIdEnu. 4

707675 4395 sm smlictriallicmanagerc.cc Expiry event requested for undefined trial licence 2

709872 4396 sm smcfgcportinserts.cc finUnique() failed Parameter 1: findUnique parameter Parameter 2: identifies the location of the error report in the code 1

714797 4397 sm smnwkservices.cc Could not find database entry for node. Parameter1: Node ID 1

717123 4398 sm smlictrialmanagerc.cc Could not set DateC / TimeC instances to current time. This should never happen. 1

717124 4399 sm smlictrialmanagerc.cc Failed to update the OIM LocalNode instance. 3

724931 4400 sm smcfgpmodinserts.cc Circuit board type limit exceeded - param1: circuit board type, param2: nodeId, param3: slotId 4

724933 4401 sm smcfgpmodinserts.cc Module family limit exceeded - param1: circuit board type, param2: nodeId, param3: slotId 5

725014 4402 sm smcfgpportinserts.cc Port type limit exceeded - param1: port type, param2: nodeId, param3: slotId 1

725021 4403 sm smcfgpportinserts.cc Port subtype limit exceeded - param1: port subtype, param2: nodeId, param3: slotId 1

727262 4404 sm smnwkservicesc.cc Failed to perform database backup before PBX restart 3

728911 4405 sm smnwkpublicinterfacec.cc SmNwkPublicInterfaceC::getProduct(nodeId) was called for a node which is not currently configured. 1

728912 4406 sm smnwkpublicinterfacec.cc SmNwkPublicInterfaceC::getCountry(nodeId) was called for a node which is not currently active. 1

729314 4407 sm smnwkservicesc.cc Unsuccessfully tried twice per second for two minutes to perform an immediate database backup before restarting 7

729408 4408 sm smnwkservicesc.cc Filesystem prebar request was unsuccessful 1

731106 4409 sm smcfgannounce.cc Failed to read MAC address from EIP 2

731683 4410 sm smcfgannounce.cc DHCP failed to get an IP-Address for an EIP1 module. Param1: Slot ID Param2: SubSlot Id Param3: Reason (0=DHCP Failed, 1=DHCP Timeout) 2

731684 4411 sm smcfgannounce.cc EIP1 module not successfull configured. SM-Port Reference or IP is undefined. Param1: Slot ID Param2: SubSlot Id Param3: - 1

735084 4412 sm smsysmain.cc Unexpected EIP1 device state 1

735905 4413 sm smcfgcportinserts.cc Invalid Office (AD2) port reconfiguration 2

735907 4414 sm smcfgcportinserts.cc Invalid DASL port reconfiguration 1

736632 4415 sm smcfgboardeipc.cc Failed to find EIP Physical Port instance 1

736633 4416 sm smcfgboardeipc.cc Failed to create an EIP Status instance 1

736634 4417 sm smcfgboardeipc.cc Failed to find EIP Status instance 1

737875 4418 sm smnwkservicesc.cc Failed to resolve master IP address 1

738378 4419 sm smnwkservicesc.cc Failed to load DSP firmware - param 1: nodeId, param 2: slotId, param 3: dspId 1

740177 4420 sm smliclicencemanagerc.cc This satellite will be restarted now because it has been running for 4 hours without a valid software release licence. 3

740321 4421 sm smliclicencemanagerc.cc Invalid licForNewSw found in database during startup 3

740325 4422 sm smnwkservicesc.cc Failed to write new licence to EIM 1

740728 4423 sm smcfgservicesatc.cc This is a fatal error. We have to fix that problem! No Slave Cache (Temporary STL data library just for lower layers) for this function call. Parameter 1: See software. Parameter 3

740923 4424 sm smnwkservicesc.cc SmNwkServicesC::performRestart() was called - the stack trace shows who called it. 2

740924 4425 sm smcfginitsat.cc Could not find specified location or physical module instance 1

740925 4426 sm smcfginitsat.cc Could not find specified physical port instance 1

741069 4427 sm smallasynchfacadec.cc SmSrvAsynchFacadeC::sendRestartCPU1() was called - the stack trace shows who called it. 2

742284 4428 sm smcfgannounce.cc No physical port instance found for a DSI module (probably due to missing FPGA firmware) - param 1 : slotId, param 2 : board type. 2

743805 4429 sm smliclicencemanagerc.cc Failed to delete licenceForNewSw from the filesystem 4

745455 4430 sm smcfgccbrdinserts.cc configured circuit board brought into service 1

747493 4431 sm smcfgslavecachprocc.cc

Port reference can't be set for this port in the Slave Cache, because this port doesn't exist in the slave cache. Or absolute port nr and port interface type don't match between

signal and slave cache. Paramter 1 upper 16 Bits: absolute port nr of the slave cache. Paramter 1 lower 16 Bits: absolute port nr of the signal. Paramter 2 upper 16 Bits: port

interface type of the slave cache. Paramter 2 lower 16 Bits: port interface type of the signal. Paramter 3: port reference of the signal. 1

747495 4432 sm smcfgslavecachprocc.cc Port reference can't be set for this port in the Slave Cache, because board type doesn't match between signal and slave cache. Paramter 1: board pointer. Paramter 2: circuit 1

750768 4433 sm smcfgcportinserts.cc Invalid primary rate port reconfiguration 1

757420 4434 sm smliclicencemanagerc.cc This satellite will be restarted now because it has been running for 4 hours without a definitive activation licence. 2

770342 4435 sm smcfgmt1.cc

Localisation failure! ==> The country dependent value can't be set for SectionName [GeneratedRingRhythmus]! Parameter 3: =0: Localisation file can't be opened. Localisation

file is missing in the file system. =1: Attribute "RingInternal" can't be converted from char to RingDataRec. =2: Attribute "RingInternal" can't be found in the localisation file. =3:

Attribute "RingTrunk" can't be converted from char to RingDataRec. =4: Attribute "RingTrunk" can't be found in the localisation file. =5: Attribute "RingSpecialAlarm" can't be

converted from char to RingDataRec. =6: Attribute "RingSpecialAlarm" can't be found in the localisation file. =7: Attribute "RingLong" can't be converted from char to

RingDataRec. =8: Attribute "RingLong" can't be found in the localisation file. =10: Token with index=parameter 2 can't be converted from char to UIn16. Next Error Id (same 3

779707 4436 sm smallsynchfacadec.cc SmAllSynchFacadeC::getLocalNodeId() was called before the localNodeId is known - param1 is the caller procId. 4

779857 4437 sm smallasynchfacadec.cc SmAllAsynchFacadeC::sendAndWaitGetLocalNodeId() was called before the localNodeId is known - param1 is the caller procId. 5

780410 4438 sm smsysserverprocc.cc In SmSysServerProcC, getLocalNodeId() was called before the localNodeId is known - param1 is the caller procId. 1

781087 4439 sm sminimanagecoredumpfiles.cc zip compression of coredump files in /home/mol/crash failed. PARAM 1: exit status of zip command 2

781088 4440 sm sminimanagecoredumpfiles.cc cleanup of coredump files in /home/mol/crash failed. PARAM 1: exit status of rm command 1

783422 4441 sm smlictrialmanagerc.cc Failed to update the active trial licences in the filesystem. 1

783424 4442 sm smliclicencemanagerc.cc Failed to write licence code to the filesystem 1

783425 4443 sm smliclicencemanagerc.cc Dongle EID is not defined. 1

783839 4444 sm smnwknoderegmanagerc.cc Failed to write the dongle dectId to the filesystem. Param1 is the dongle dectId. 2

786191 4445 sm smliclicencemanagerc.cc Failed to update the dongle supervision time in the database 1

786261 4446 sm smliclicencemanagerc.cc Failed to initialise the dongle supervision time in the database 1

786800 4447 sm smsysmain.cc Scrambler process has died. Reboot the system in order to restart the scrambler. 2

787062 4448 sm smnwkselfregwaitforconfirmst.cc smCfgReceiveSatConfig() failed - param1: nodeId, param2: slotId, param3: boardType. 1

787063 4449 sm smnwkselfregwaitforconfirmstc.cc Failed to receive a PortConfig signal for each board during satellite registration - param1: nodeId, param2: board count, param3: received signal count. 1

787559 4450 sm smliclicencemanagerc.cc The connection to the gateway sat is lost. Param1: xx hours (restricted mode activation in xx hours) 1

787560 4451 sm smliclicencemanagerc.cc The connection to the gateway sat re-established. 1

793289 4452 sm smliclicencefile.cc Internal Licencefile handling issue param1 what: 1: unable to backup the given licence file! 1

780521 5001 ws wssrvdlintegration.cc the WS listener manager doesn't know the GoAhead Accept handler. The manager should always know it, else it can't create new listeners. 1

783893 5002 ws wssrvstrings.cc The requested language for the requested application couldn't be loaded 1

784454 5003 ws wssrvproc.cc handleSig() detected that the GoAhead poll timer isn't running anymore. Timer timer is started again. 1

793315 5004 ws wswebclient.cc A request should be send out via the proxy, but the proxy isn't configured. 1

628040 6001 ds dsmain.c Primitiv receive error 1

628041 6002 ds dsmain.c Flash copy error. 1

628154 6003 ds dsmain.c Unknown Major received in dsMainProc() 1

628198 6004 ds dsmain.c Unknown signal Major for proc dsMainProc 1

628238 6005 ds dsdflbcs8.c No more memory for new Office datas 1

628239 6007 ds dsdflbcs8.c This <Office> datas are not within the Office memory range 1

628240 6008 ds dsdflbcs8.c Unknown flash memory for PLATFORM_BCS8 to clear 1

628241 6009 ds dsdflbcs8.c Unkorrekt Office memory block fot PLATFORM_BCS8 1

628263 6011 ds dsdflbcs8.c Unkorrekt Office data memory block during set the portlist 1

628276 6012 ds dsdflbcs8.c 1

628277 6013 ds dsdflbcs8.c Office DB can't initialise correctly because corrupt RAM data blocks 1

628278 6014 ds dsdflbcs8.c Office DB can't initialise because boot entry pointer in RAM corrupt 1

628280 6015 ds Memory size for memory 1

628281 6016 ds dsdflbcs8.c Memory size for memory administration is to small (min : 40 * sizeof(UInt32) 1

628282 6017 ds dsdflbcs8.c Data base for this Office corrupt because of defect RAM contents 1

628311 6018 ds dskdm.c KDM opened twice. 1

628312 6019 ds dsp.cc Key isn't valid. 1

628313 6020 ds dsp.cc No long Click possible. 1

628367 6021 ds dsbdrflash.c no sector found to reorganize. there is no sector with enough space to store a block, even after reorganizing a sector. 1

628368 6022 ds dsbdrflash.c writing a block failed. 1

628369 6023 ds dsbdrflash.c starting the blockdriver failed. the flashdata is in a reorganizing state, but the sector with the most free space has not enough free space that we can write the valid data of the 1

628370 6024 ds dsbdrflash.c a handle is invalid. a block should have been deleted, but it's handle is invalid. 1

628371 6025 ds dsbdrflash.c parameter is invalid. a byte in a block should have been updated, but either the handle of the block or the offset within that block is invalid. 1

628372 6026 ds dsbdrflash.c updating a byte impossible. update is only possible if each bit turns from HIGH to LOW or stays LOW. in this update a bit should turn from LOW to HIGH, which is forbidden. 1

628373 6027 ds dsbdrflash.c an invalid handle. a block should be commited, but it's handle is invalid. 1

628374 6028 ds dsbdrflash.c lost of data. while scanning a sector which should contain valid data, no valid block was found. 1

628375 6029 ds dsbdrflash.c an invalid handle. should search the next valid block after a specified block, but the latters handle is invalid. 1

628376 6030 ds dsbdrflash.c lost of data. while scanning a sector which should contain valid data, no valid block was found. 1

628377 6031 ds dsbdrflash.c an invalid handle. some information about a block is desired, but it's handle is invalid. 1

628378 6032 ds dsbdrflash.c an invalid handle. a block should be unlocked, but it's handle is invalid. 1

628379 6033 ds dsbdrflash.c lost of data. while scanning the sector to be reorganized no valid block is found, although it should contain some valid data. 1

628380 6034 ds dsbdrflash.c allocation failed in reorganizing. 1

628647 6035 ds dskdmbcs8.c Flash EEPROM backup lifetime (guaranteed max. write zykles) is reached 1

628648 6036 ds dskdmbcs8.c The checksum of the RAM block is not the same as the just before blowing FLash EEPROM block 1

628673 6038 ds <Do>all<obj>.cc RDfindNext failed: given Primary-key is out of range or otherwise invalid; parameters: Object Unique Id,PrimaryKey 1

628674 6039 ds <Do>all<obj>.cc RDfindPrevious failed: given Primary-key is out of range or otherwise invalid; parameters: Object Unique Id,PrimaryKey 1

628675 6040 ds <Do>all<obj>.cc Database couldn't bind instance; parameters: ObjectUniqueId, PrimaryKey, binding (ReadOnly / ReadWrite) 1

628676 6041 ds <Do>all<obj>.cc DB interface binding failed: given Primary-key is out of range or otherwise invalid; parameters: Object Unique Id,PrimaryKey 1

628677 6042 ds <Do>all<obj>.cc DeleteAll failed 1

628678 6043 ds <Do>all<obj>.cc RDCreate Instance with Key failed: Primary key is out of range; parameters: Object Unique Id, PrimaryKey 1

628679 6044 ds <Do>all <obj>.cc RDCreate with Key failed in Database: Primary Key is out of range; parameters: Object Unique Id, Primary Key, m_status 1

628680 6045 ds <Do>all <obj>.cc RDCreate Instance without Key failed; Primary Key is out of range, parameter Object Unique Id, Primary Key, m_status 1

628751 6047 ds dskdm.c KDM closed two times => This situation is not allowederrorid l -6018 1

628752 6048 ds dskdm.c KDM check array is corrupt 1

628753 6049 ds dskdmbcs8.c The daily backup was not successfull two times 1

628754 6050 ds dskdmbcs8.c The daily backup was not successfull two times 1

628755 6051 ds dskdmbcs8.c Flash EEPROM page blowing was not ok 1

628814 6056 ds dsmain Unknown signal Minor in process dsKdmCheckProc 1

628815 6057 ds dsmain Major unknown or not implemented for dsKdmCheckProc 1

628817 6058 ds dskdm.c Plausibility test of KDM administration was not ok grep dsKdmAdmin ds/*.c 1

628821 6059 ds <Do>all<objectKeyLetter>.cc RD DeleteInstance failed in database; parameters : ObjectUniqueId, PrimaryKey, m_status 1

628822 6060 ds <Do>all<objectKeyLetter>.cc DB interface Instance Delete failed : binding not ok; parameters : ObjectUniqueId, database instanceId (m_Id) 1

628823 6061 ds <Do>all<objectKeyLetter>.cc DB interface Attribute Access failed: binding not ok; parameters : ObjectUniqueId, database instanceId (m_Id), binding (ReadOnly or ReadWrite). 1

628886 6062 ds dskdm.c KDM-test-Error: 400 --> KDM datas are korrupt 1

628904 6063 ds dsbdrflash.cc No Flash device found/no persistent memory available. 1

628905 6064 ds dsins.cc Block of known object with unknown (obsolete?) specs found - delete it. 1

628906 6065 ds dsinssrv.cc Remote DB: Writing changed data back failed (no interface or mismatch between client/server versions). 1

628907 6066 ds dslck.cc Locking failed (other concurrent transaction holds it). Not a bug if concurrency can happen here. 1

628908 6067 ds dsobj.cc Duplicated Unique Object IDs. PANIC! System can't be started this way - no way. 1

628909 6068 ds dsobj.cc Object could not be started. 1

628910 6069 ds dsobj.cc Stopping Object failed. 1

628911 6070 ds dsrda.cc Remote DB: Database server did not respond in time (is probably down) - give up this access. 1

628912 6071 ds dsrda.cc Remote DB: Access to illegal board (boardId out of range). 1

628913 6072 ds dssrv.cc Old DB data detected - first start performed automatically with loss of existing data. 1

628914 6073 ds dssrv.cc PeerDying signal for non-existing interface received - signal ignorred. 1

628915 6074 ds dstrn.cc Write during transaction commit failed - rollback transaction. 1

628916 6075 ds dstrn.cc Block of unknown object found - delete it. 1

628917 6076 ds dstrn.cc Restarting by system crash aborted transaction commit failed during recovery - DB may be inconsistent. 1

628918 6077 ds dstrn.cc Recovery was not completely successful - delete uncommitted blocks. 1

629152 6078 ds dsrda.cc Client/Server database version mismatch - please bring both boards to same level 1

629153 6079 ds dsins.cc find context not initialized (missing findReset or findNext after get) 1

629154 6080 ds dsins.cc // findNext after failed findNext (or the like) 1

629182 6081 ds dsinsr.cc Remote DB: Instance Interface called with invalid transaction id. 1

629183 6082 ds dsinssrv.cc Remote DB: Instance Interface called with invalid transaction id. 1

629184 6083 ds dstrnr.cc Remote DB: Instance Interface called with invalid transaction id. 1

629185 6084 ds dstrnsrv.cc Remote DB: Invalid transaction id. 1

629214 6085 ds dstrnr.cc Remote DB: start response signal contains garbage 1

629268 6086 ds dsinsr.cc RemoteDB: Size of data received from server is bad. 1

629282 6087 ds dsp.cc Office terminal attributes brought into valid range. 1

629306 6088 ds dsrdaclt.cc Remote DB called while KDM open. Can cause messed up KDM write protection with address error crash. 1

629327 6089 ds dsver.cc Version transfer error occurred. The transfer proceeded, but the database may be in an inconsistent state. A Firststart is recommended. 1

629328 6090 ds dsver.cc DB: object found during startup/recovery that is not at least of type block. 1

629329 6091 ds dsver.cc Illegal version transfer phase entered. Transfer skipped and advanced to next one. 1

629330 6092 ds dsver.cc Database version lost. Version before version transfer was guessed. 1

629331 6093 ds dsobj.cc Non-permanent object left on database stop. Version transfer did not cleanup properly. 1

629333 6094 ds dssrv.cc Database Startup Information: Firststart performed due to domain startup request. 1

629335 6095 ds dsp.cc dspAnnounceOrigTerm: called with invalid terminal type. 1

629336 6096 ds dsblk.cc DB Recovery: block in storage found the object does not use to store its blocks. 1

629337 6097 ds dsblk.cc DB Recovery: block with 'out-of-range' block id found. 1

629338 6098 ds dsblk.cc DB Recovery: Two blocks for same object with same block id but different content found. One deleted. 1

629339 6099 ds dsblk.cc DB Reorg: block found for object we don't know. Block deleted. 1

629340 6100 ds dstrn.cc Transactioning: transaction started by idx twice by recovery. Second attempt ignorred. 1

629341 6101 ds dstrn.cc Transactioning: run out of ids. 1

629345 6102 ds dsp.cc dsp: invalid key id (defId/locId). 1

629346 6103 ds dsinsr.cc Remote Database: client-side object definition does not match to one on the server side. Bring boards to same software version. 1

629347 6104 ds dsbdrflash.cc Database Flash is completely full and can not be reorganize anymore. Firststart is required. 1

629348 6105 ds dsbdrflash.cc Database: Flash Full. Try to delete data block-wise. Firststart might be required in worst-case. 1

629362 6106 ds dstrn.cc DB: Firststart did not work. Still blocks around. 1

629380 6107 ds dsrdaclt.cc Remote DB: Cannot handle request as database is not active! 1

629570 6108 ds dskdmstar.c Corrupt data written to flash or header not updated correctly 1

629574 6110 ds dskdmstar.c No valid flash sector evaluated 1

629592 6111 ds dskdmstar.c Call logging flash sectors not initialised or conflict in evaluating active sector 1

629593 6112 ds dskdmstar.c Call Logging Data Memory Overflow 1

629819 6113 ds dsbdrflash.cc Corrupt or uninitialised database - firsstarting. 1

629820 6114 ds dsbdrflash.cc Old DB data detected - first start performed automatically with loss of existing data. 1

629835 6115 ds dsburrestore.cc Ds RUL Backup Restore - Restore - Error Accessing Software Manager 1

629836 6116 ds dsburrestore.cc Ds RUL Backup Restore - Restore - Could NOT open rollback file 1

629837 6117 ds dsburrestore.cc Ds RUL Backup Restore - Restore - Error opening rollback file 1

629838 6118 ds dsburrestore.cc Ds RUL Backup Restore - Restore - Error Decompressing Rollback file 1

629839 6119 ds dsburrestore.cc Ds RUL Backup Restore - Restore - Error allocating temporary space for decompression 1

629840 6120 ds dsburrestore.cc Ds RUL Backup Restore - Restore - Error allocating space for decompression block 1

629841 6121 ds dsburrestore.cc Ds RUL Backup Restore - Restore - Error allocating space for contiguous block 1

629842 6122 ds dsburrestore.cc Ds RUL Backup Restore - Restore - Error writing block to flash 1

629843 6123 ds dsburrestore.cc Ds RUL Backup Restore - Restore - Invalid Block Checksum 1

629844 6124 ds dsburrestore.cc Ds RUL Backup Restore - Restore - Error moving to end of current block 1

629846 6125 ds dsburbackup.cc Ds RUL Backup Restore - Backup - Cant open rollback file (for writing) 1

629847 6126 ds dsburbackup.cc Ds RUL Backup Restore - Backup - Compression didn't finish successfully 1

629848 6127 ds dsburbackup.cc Ds RUL Backup Restore - Backup - Cant close the restore (RUL - rollback) file! 1

629849 6128 ds dsburbackup.cc Ds RUL Backup Restore - Backup - the one and only SoftwareManager must always exist 1

629850 6129 ds dsburbackup.cc Ds RUL Backup Restore - Backup - PutNextCompressedBlock - fwrite unsuccessful 1

629865 6130 ds dsidxmap.hh DsIdx - Map - Non-unique key used for attempted insert into map 1

629866 6131 ds dsidxtree.hh Ds Idx - Tree - Index is too big. Cannot allocate temporary table for tree nodes 1

629930 6132 ds dskdmstar.c trying to write data beyond range of call logging data memory 1

629944 6133 ds dsidxindex.hh Key is undefined. Cannot use an undefined key with indexing. 1

629945 6134 ds dstransaction.cc Nested Transaction Attempted. Two occurrences of DsTransaction active in the same process. 1

629948 6135 ds dsbdrflash.cc Call to dsbdrflash:deleteBlock failed. 1

630005 6136 ds dsburrestore.cc There was an error updating the handle in the block table identified by the object and block Id 1

630006 6137 ds dsburrestore.cc Error writing object block to flash 1

630007 6138 ds dsburbackup.cc Found a flash block to be backed up which is marked for deletion. 1

630058 6139 ds dsmasynchbridge.cc Error Mapping DsTbxMenuEnuC to MaTbxMenuEnuC - undefined value 1

630074 6140 ds dsnorcommon.hh Wrong subtype for normal object 1

630434 6141 ds dsbdrflash.cc deleteBlock has calculated values for valid and invalid data in a sector which are impossible. 1

630490 6142 ds dsblk.cc object created for version transfer has different specs than the one created statically for general use 1

630491 6143 ds dsins.cc packed size of dsIns object exceeds object max size 1

630492 6144 ds dsins.cc packed size of dsIns object exceeds object max size 1

630544 6145 ds dstrn.cc Unsuccessful rollback following failed write 1

630545 6146 ds dstrn.cc Unsuccessful commit of unfinished transactions following rollback 1

630600 6147 ds dsbdrflash.cc Corrupted data detected in flash block 1

630638 6148 ds dsbdrflash.cc blockScan() has been passed an invalid startadr (not 32-bit aligned) 1

630697 6149 ds dstrn.cc A transaction in id has been used which indexes a null pointer. The database may be irreci overably corrupt. 1

631256 6150 ds dsffh.c flash write error 1

631257 6151 ds dsffh.c flash erase error 1

631258 6152 ds dsffh.c flash read error 1

643314 6153 ds dsclg.c No empty flash page found. 1

643315 6154 ds dsclg.c This is a corrupted call logging data page. 1

652407 6155 ds dsclgcpy.c Not able to find active call logging data sector in parallel flash. 1

733191 6156 ds dssrv.cc A backup error has occurred and a notification of the error has been received from HD. Parameter contains the PlBackupErrorEnu describing error. 1

741067 6157 ds dsdbc* Problem in one of the Database-Connector (DBC) classes 1

782271 6158 ds dsdbiaccessc.cc Failure when accessing the MSL database. See parameter 1 for the location in the code. 1

785260 6159 ds dssrv.cc DsSrvProcC::prelude() was not able to Register the thread cleanup handler. This leads to unnecessary Errors on regular application Exit. 1

777996 7001 msrv msrv/src/msrvcontc.cc Failed to insert a Media Server end point into container. 1

780502 7002 msrv msrv/src/msrvcontc.cc Could not register the application exit call back function, this leads to unnecessary core dumps on regular application exit. p1: - p2: - p3: - 1

786519 7003 msrv msrvcontc.cc Read from Mitel Media Server call back pipe failed. p1: pipe read result p2: errno p3: - The read data is not handled any further. This should never happen and would need 1

786520 7004 msrv msrvcontc.cc

Mitel Media Server call back pipe could NOT be created, no call backs from the Media Server possible! p1: errno p2: - p3: - This should never happen! This will have a negative

impact on the Mitel Media Server and will lead to all kind of problems related to audio when the Mitel Media Server is involved. 1

786888 7005 msrv msrvcontc.cc Could not start the Media Server. This has an impact on all audio related Media Server features, e.g. no inderect switched VoIP possible, no conferences, no voice mail, no call 1

628091 8001 xa xacommon.c Too many members for building a new conferenceToo many members for building a new conference 1

628122 8002 xa xaitfxfctcourtesy.cc function xaItfXCourtesy, Unknown Courtesy mode 2

628123 8003 xa xacsycourtesy.c invalid group number or to big delay-time for courtesy 1

628124 8004 xa xaitfcourtesy.cc invalid group number for courtesy 2



628127 8007 xa xacsycourtesy.c invalid group number for courtesy 1

628128 8008 xa xacsycourtesy.c invalid group number for courtesy 1

628129 8009 xa xasendst2.c invalid courtesy-command 1

628130 8010 xa xacsycourtesy.c invalid ddi number for courtesy-group 1

628131 8011 xa xacsycourtesy.c invalid ddi number for courtesy-group 1

628132 8012 xa xasubfacadm.cc XaSwitchPositionTypeC: unknown day-night-weekend variant 3

628133 8013 xa xancpmain.cc MajorCourtesy, no valid Minor defined 2

628212 8014 xa xacomtrunkgroup.c Invalid trunk reference value 1

628213 8015 xa xacomtrunkgroup.c external number too long (for the type) 1

628214 8016 xa xaextitytimer.cc COUNTRY_I : A wrong timer tryes to start 2

628215 8017 xa xaextitytimer.cc COUNTRY_I : A wrong timer came 2

628339 8018 xa xamail.c unknown device cannot send a mail waiting indication 1

628348 8019 xa xaxfctmail.c This device is not able to handle MWI messages 1

628642 8020 xa xaxfctsetup.c Dect HS is unsubscribed 1

628644 8021 xa xacomsubscref.cc Overflow, too many DECTHandset instances for UInt8. (No more used since I5) 2

628645 8022 xa xasubref.cc Invalid msn value for this interface 2

628646 8023 xa xasubref.cc Invalid input parameter: Subscriber Ref, Port Ref, MSN 2

628652 8024 xa xancxfacility.cc/xasubfacadm.cc call to set bitset of dect handset has failed 2

628653 8025 xa xancaexastar.cc TypeOfCallForwardingEnu: enum value out of range 3

628654 8026 xa xaexastar.c wrong type_of_cf in check_short_num 1

628656 8028 xa xaswgswitchgroup.c invalid switchGroup or SwitchPosition passed to xaSwgSetSwitchPosition 1

628657 8029 xa xarouswgswitchgroup.cc invalid switchGroup passed to xaRouGetSwitchPosition 3

628658 8030 xa xaswgswitchgroup.c invalid trunkRef or switchGroup passed to xaSwgSetAnalogTrunkSwitchGroup 1

628659 8031 xa xaswgswitchgroup.c invalid trunkRef passed to xaSwgGetAnalogTrunkSwitchGroup 1

628660 8032 xa xaswgswitchgroup.c invalid digTrunkGroup or switchGroup passed to xaSwgSetDigTrunkSwitchGroup 1

628661 8033 xa xaswgswitchgroup.c invalid digTrunkGroup passed to xaSwgGetDigTrunkSwitchGroup 1

628662 8034 xa xaswgswitchgroup.c invalid ddiRef or switchGroup passed to xaSwgSetDdiSwitchGroup 1

628663 8035 xa xaswgswitchgroup.c invalid ddiRef passed to xaSwgGetDdiSwitchGroup 1

628664 8036 xa xaswgswitchgroup.c invalid switchGroup passed to xaSwgCheckSwitchGroupPermission 1

628665 8037 xa xaregister.c wrong switch case: CFU, CFB, CFNR accepted only 1

628685 8038 xa xancaexastar.cc error: not in enumeration day/night/weekend 3

628689 8039 xa xaccbscom.c xa-node-status = Exit (wrong) 1

628690 8040 xa xaccbscom.c bcsRef out of Range 1

628726 8041 xa xaccbsproc.c no memory to alloc a ccbs-data-block 1

628727 8042 xa xafacilities.c not expected nc_facility_param 1

628728 8045 xa xaregister.c wrong NC-node-state at the receiption of an external Register-Message 1

628733 8047 xa xaxfctsfc.c The NC-node that received the message CCBS-T-Resume is not a CCBS-node 1

628734 8048 xa xaxfctsfc.c The origin-BcsRef in function nc_x_sfc_cbi is out of range 1

628745 8049 xa xacsycourtesy.c invalid trunkRef or group number for courtesy 1

628746 8050 xa xacsycourtesy.c invalid trunkRef for courtesy 1

628747 8051 xa xacsycourtesy.c invalid digTrunkGroup or group number for courtesy 1

628748 8052 xa xacsycourtesy.c invalid digTrunkGroup for courtesy 1

628770 8053 xa xaccbsproc.c ASN.1 decomposed data-block has invoke-comp-datas 1

628771 8054 xa xaccbsproc.c ASN.1 decomposed data-block has returnResult-comp-datas 1

628772 8055 xa xaccbsproc.c ASN.1 decomposed data-block has returnError-comp-datas 1

628773 8056 xa xaccbsproc.c ASN.1 decomposed data-block has has an unknown-component-type 1

628774 8060 xa xaccbsproc.c ASN.1 decomposed data-block has invoke-comp-datas 1

628775 8062 xa xahunting.c function xaCheckHuntTrunk: inPortRef == NoPortRef 1

628776 8063 xa xahunting.c function xaCheckHuntTrunkGroup: TrunkGroup == EmptyTrunkGroup 1

628777 8064 xa xahunting.c function xaCheckHuntTrunkGroup: TrunkGroup == NoTrunkGr 1

628778 8065 xa xarelcom.c No CCBS-node has been found 1

628779 8066 xa xasetupconf.c No CCBS-node has been found 1

628780 8068 xa xasendcom.c composing Asn.1-data: unexpected facilityParam 1

628781 8071 xa xasendcom.c composing Asn.1-data: function:insFacCcbsTErr: unexpected facilityParam 1

628783 8072 xa xancarelcom.cc No User responding alarm Type Alarm: Parameter: DdiRef, TepId, Node -> MDT Alarm: NoRespFromUser(18) 4

628812 8073 xa xaasnconfig.h . 1

628818 8074 xa xahunting System Overload alarm in xaexthunting Type Alarm: -> MDT Alarm: SysOverload(19) 3

628867 8075 xa xafacadm.c Incorrect case value in switch statement 3

628868 8076 xa xafacadm.c Incorrect case value in switch 1

628932 8077 xa xadiscind.c Tone switching failed 1

628933 8078 xa xafacadm.c DECT Cf unreachable number - length too long 1

629021 8079 xa xalcr.c LCR: Invalid Character in Digit String 1

629022 8080 xa xalcr.c LCR: Invalid Timer Send Type 1

629124 8081 xa xacsycourtesy.c Invalid Csy Group found 1

629166 8082 xa xancpmain.c unknown minor from majorXaNs received in XA 2

629190 8083 xa xatimexp.c illegal nodestate in int_tim_exp. with parameters extended 1

629191 8084 xa xafacadm.c try to insert a name into the abc-list which is already in there 1

629196 8085 xa xaconnected Untreated ns value. 1

629199 8086 xa xacallproc.c Incorrect case value in switch (ns) 1

629200 8087 xa xacallproc.c Incorrect case value in switch (ns_ph_ind) 1

629201 8088 xa xacallproc.c Incorrect case value in switch (ns_ph_ind) 1

629202 8089 xa xacallproc.c Incorrect case value in switch (ns) 1

629222 8090 xa xaLcr.c LCR: Unable to identify Subscriber / Trunk Nodes 1

629223 8091 xa xasendcom.c No ddi number found to a ddi-ref ??!?? 1

629260 8092 xa xasendcom.c setup with an invalid bcsref. produces later error-id 12012 1

629261 8093 xa xasendcc.c setup with an invalid bcsref. produces later error-id 12012 and 8092 1

629293 8094 xa xarouting.c too long loop in nc_check_ug_next. stop it because of watchdog-superviser. br5290 1

629294 8095 xa xaexaselect.c unexpected selection in this state 1

629295 8096 xa xaxfctsfc.c can't set new channel-owner 1

629296 8097 xa xaxfctconnect.c unknown phase in treat node 1

629297 8098 xa xacommon.c unknown node-state encountered 1

629298 8099 xa xaxfctconnect.c node not found from given pref/b-ch 1

629513 8100 xa xalcrdataaccess.cc This function is designed for EXACTLY ONE LCR System Obtect to exist See Parameter for the number that have been found 1

629515 8101 xa xasendcom.c wrong facilityParam in insFacAoc 1

629523 8102 xa xaxfctsetup.cc Allocation of bcsRef failed 1

629525 8103 xa xacomtrunkgroup.c No trunk-group has been found for this portref and chanGrp 1

629526 8107 xa xafacilities.c In function xaFacPaReRejStartExtCf, PaRe-xa-node has no called_link 1

629527 8108 xa xarouting.c Function xaGetGroupedDivReason: subscriber has an unknown call-forwarding 1

629528 8110 xa xatelerouting.c Function checkAndSetPaReAllowedBit: subscriber has an unknown call-forwarding 1

629529 8111 xa xatelerouting.c Function checkAndSetPaReAllowedBit: No Trunk-Group found for this portref 1

629530 8112 xa xalcrdataaccess.cc Could not create LCR number. It should have been possible 1

629531 8113 xa xalcrdataaccess.cc Unexpected value for type of service provider 1

629532 8114 xa xalcrdataaccess.cc Cannot initialise LCR system for first start 1

629533 8115 xa xalcrdataaccess.cc Cannot find table entry 1

629534 8116 xa xalcrdataaccess.cc cannot access table entry 1

629535 8117 xa xalcrdataaccess.cc cannot access table entry 1

629536 8118 xa xalcrdataaccess.cc cannot remove table entry 1

629537 8119 xa xaholdind.c wrong call of anal_ext_hold_ind 1

629538 8120 xa xaretrieveind.c wrong call of anal_ext_retrieve_ind 1

629539 8121 xa xaxfctconnect.c wrong param: rej_notind_param 1

629541 8122 xa xaxfctsetup.cc allocation of b-channel failed 1

629542 8123 xa xainfosave.c not expected Info-Element in q31IEP of ASN.1 decomposed data-block 1

629543 8124 xa xainfosave.c No correct sigP in function xaSaveAsnPosBcHlcLlc 1

629544 8125 xa xainfoserver.c function xaIfTakeAsnPartyNumber; couldn't allocate an if-block 1

629545 8126 xa xasendcom.c function insPublicPartyNumber: only an empty-number could be insertet 1

629546 8127 xa xasendcom.c function insQ931InfoElement: allocated Memory too small-> controlled crash 1

629547 8128 xa xasetupconf.c No CCBS-Block found (P-MP-CCBS) 1

629558 8129 xa xaxfctfacility.c function xaXAsnOpDcrFac: unknown facilityParam 1

629559 8130 xa xaxfctfacility.c function xaXAsnOp: unknown facilityParam 1

629560 8131 xa xaxfctsfc.c function call_back_subs: CCBS-Record has no ifPointer 1

629561 8132 xa xatelerouting.c DDI destination not valid. 1

629562 8133 xa xatelerouting.c Trunk destination not valid. 1

629563 8134 xa xatelerouting.c Problem with tReference 1

629564 8135 xa xasendcom.c facilityParam not valid 1

629565 8136 xa xafacilities.c Invalid fac param 1

629568 8137 xa xacomnumbers.cc NumPlan access with illegal analType/numRef combination. 1

629569 8138 xa xacomchangroup.cc Channel number too high 1

629571 8139 xa xamain.c a nc hanger single/disc was found. was hanging 1-2min. ibus stoppen 1min later 1

629575 8140 xa xasuspendind.c Invalid Message extern in anal_ext_suspend_ind 1

629576 8141 xa xaresumeind.c Invalid Message extern in anal_ext_resume_ind 1

629577 8142 xa xaccisendcom.cc function insFacCallReroutingInv, undefinded CF 2

629578 8143 xa xasendcom.c function insFacCallReroutingInv, no CF programmed 1

629579 8144 xa xaparkbutton.c Message Resume: Call_ref is not from the same S-Bus 1

629580 8145 xa xacomcalldistribution.cc underflow in counting incoming calls to a calldistribution 1

629582 8146 xa xacomtrunkgroup channel group >= XaCgNrIdC::Max 1

629585 8147 xa xanotifyind.cc Unknown value for xaNotifInd. 1

629587 8148 xa xanotifyind.cc Unexpected Phase-Status combination at either nc_msg_node_p or peer_node_p. 1

629594 8150 xa xatelerouting.cc datacalls from analog trunk not possible; only telefony calls 1

629597 8151 xa xaccbsproc.c Undefined CcbsDataType in analCcbsTmoInd 1

629598 8152 xa xaccbsproc.c Undefined TimerEvent in analCcbsTmoInd 1

629599 8153 xa xacomsubscref.cc Port or Subscriber instance not found 1

629600 8154 xa xaccbsproc.c function xaCcbsGetNewRef or xaGetNewLinkageId, no more free values 1

629601 8155 xa xaccbsproc.c function xaCcbsDeleteRef or xaDeleteLinkageId, values out of range 1

629602 8156 xa xafacilities.c function exaCcbsStatusRequestRr, No CcbsNode found 1

629603 8157 xa xafacilities.c function exaCcbsStatusRequestRr, Unknown CcbsDataType 1

629604 8158 xa xafacilities.c no CcbsDataBlock found at the reception of FacCcbsRequestRr 1

629605 8159 xa xasendcc.c no CcbsDataBlock found when sending a CcbsCallInv to publ network 1

629606 8160 xa xahunting.cc The linePref is not found in any Bundel ! 1

629609 8161 xa xaxfctfacility.c function xaXAsnOpDcrFac, case case FacCcbsStatusRequest..Rr, no CcbsDataBlock found 1

629610 8162 xa xaxfctfacility.c function xaXAsnOpDcrFac, case case FacCcbsEraseInv, no correct CcbsRef received 1

629615 8163 xa xafacadm.cc Function called with invalid argument 1

629616 8164 xa xafacadm.cc Incompatible Terminal type or Terminal not found. 1

629631 8165 xa xaasncommon.cc The passed facParam value is either "FacNoParam" and thus not allowed to be passed to this function, or a value that is not handled correctly here. 1

629647 8166 xa xasubmessage.cc Inconsistency encountered while removing CallRequest instance. 2

629648 8167 xa xamain.c Oh, I have detected a hanging bcsRef. stop internal IBUS-Tier 1

629653 8168 xa xacomappointment.cc AppointmentCall instance could not be created. 1

629655 8169 xa xadistrouting.cc unknown callDistribution-Type 1

629656 8170 xa xasubfacadm.cc data could not be stored in database P1: destination sref P2: msg id P3: originator sref 2

629657 8171 xa xacommessage.cc Invalid function argument, inconsistency 1

629675 8172 xa xaxfctfacility.cc deviceNr: default case of DeviceNr different from 1 or 2 1

629676 8173 xa xaxfctfacility.cc DeviceNr: Default case for deviceNr different from 1 or 2 in case DevDoor. 1

629677 8174 xa xaxfctfacility.cc dest_state: Default case if different from TRUE or FALSE in the switch of the DevRemoteMaintenance case. 1

629678 8175 xa xaxfctfacility.cc dest_device: Default case if different from DevDoor, DevRelais or DevRemoteMaintenance 1

629679 8176 xa xainfoserver.cc Digit Barrier not found. 1

629680 8177 xa xadigitbarrier.cc Database access problem. 1

629684 8178 xa xatelerouting.cc Too many QSIG licence required following the actual licence limitation on the system. Incoming calls. 1

629690 8179 xa xahunting.cc WRONG QSIG LICENCE: Exceded the number ogf autohrised QSIG chqnnels. 1

629694 8180 xa xadistrouting.cc call-waiting target not defined/found 1

629703 8181 xa xafacilities.cc unknown ASN.1 operation received in Facility message 1

629705 8182 xa xaexastar.cc

User Alarm *77xxxx Type Alarm: -> MDT Alarm: TestAlarm(24) My first task at Ascom: introducing a new alarm, called "user alarm" which is used by typing "*77" followed by

four digits in the range of [0..9]. These four digits are the alarming-parameter, which is sent to the alarmreceiver(s). See fdoc - 270 2

629706 8183 xa xafacilities.cc not treated ASN.1 operation received in Facility message 1

629722 8185 xa xafacilities.cc unknown or no ASN.1 operation received in FACILITY message 1

629723 8186 xa xafacilities.cc not treated ASN.1 operation received in FACILITY message 1

629738 8188 xa xaqsiglicencechk.cc Error when trying to find a unique port with a unique id in xaCheckPortForIpRouter() 1

629805 8189 xa xaxfctconnect.c In connectRemoteControl, the RemContr-node has an called- or calling-node 1

629813 8190 xa xatimconf.c In function anal_ext_tim_conf, a non coded timerReason has been received 1

629910 8191 xa xaasnfacilityie.cc Trying to send an ASN.1 facility to an internal terminal. [D [D [D [. 1

629911 8192 xa xaasnfacilityie.cc The given ASN.1 facility is not allowed to be sent over DSS1. 1

629912 8193 xa xaasnfacilityie.cc The given ASN.1 facility is not allowed to be sent over PSS1. 1

629913 8194 xa xaasnfacilityie.cc The given ASN.1 facility is not allowed to be sent over PSS1_ISO. 1

629914 8195 xa xasendcom.cc There was no message for a forwarded ASN.1 facility IE. 1

629915 8196 xa xaccisendcom.cc No message has been sent out for the given APDU. See also br23764: Too many ErrorReport 8196. 4

629931 8197 xa xamain.cc Xa has changed its process-priority 1

629936 8198 xa xaxfctsfc.cc wrong reject code in nc_x_reject() 1

629937 8199 xa xaholdind.cc Hold Indication received on external trunk 1

629938 8200 xa xaparkbutton.cc Call_ref is from different S-Bus 1

629939 8201 xa xaxainfoserver.c function xaIfRemoveStarAfterFacNmb failed because of wrong parameters 1

629941 8202 xa xaresumeind.cc Resume Indication received on external trunk 1

629942 8203 xa xasuspendind.cc Suspend Indication received on external trunk 1

629943 8204 xa xaretrieveind.cc Retrieve indication received on external trunk 1

629950 8205 xa xaabortind.c Pointer is Null...problem of pointer range...out of scope. 1

629952 8206 xa xatimconf In a Call Hold scenario the disconnect timer was started from an non Etsal 1

629953 8207 xa xaexaselect.c HoldAck and HoldReject both received. Abnormal case. Cleanup of bits was missed somewhere. 1

629954 8208 xa xaexaselect.c Null pointer. Should be different from Null. 1

629955 8209 xa xaexaselect.c checkHoldState called with wrong paramters. 1

629956 8210 xa xaholdonpstn.c analIntHoldRej: Wrong call for an external answer. 1

629957 8211 xa xaretrieverej.c AnalIntRetrieveRej: error as it should be used only for external call. 1

629958 8212 xa xaretrieverej.c Received RetrieveREj message from PSTN while REtrieveREq was not set. Error. 1

629959 8213 xa xaretrieveconf.c analIntRetrieveConf: Wrong state as we should be with an external call. 1

629960 8214 xa xaretrieveconf.c peer_p->call_info_3 & RetrieveRequestSentBit ==0 when we receive RetrieveConf... problem. Wrong state. 1

629961 8215 xa xaretrievereq.c Pointer of the userRecord->calling/called-link is Null. Problem of node. 1

629962 8216 xa xaholdonpstn.c Pointer Null in xaSetHoldPstn(). Error. 1

629963 8217 xa xaholdonpstn.c Pointer Null in analExtHoldConf(). Error. 1

629964 8219 xa xancaholdreject.cc Pointer Null. Error with nc_msg_node_p. 2

629965 8220 xa xaholdonpstn.c Pointer Null. Error. 1

629966 8221 xa xaholdonpstn.c Pointer Null. Error of assignation. 1

629967 8222 xa xaexaselect.c Pointer Null. Error. 1

629968 8223 xa xaabortind.c Pointer null. Error of assignation in XaAbortTreat(void). 1

629969 8224 xa xaexaselect.c Pointer Null in xaHoldClearAllBits(...). 1

629970 8225 xa xaholdonsptn.c HoldCallHeldBit or HoldRequestSentBit differnt from zero in xaSetHoldPstn(). Error. they should have been cleaned before. 1

629971 8226 xa xaholdonpstn.c HoldRequestSentBit is not set when we receive an HoldAck back. There are errors in the bits settings. 1

629973 8227 xa xaholdonpstn.c Wrong Auxiliary State. It should be HoldIdleState. 1

629975 8228 xa xaholdonpstn.c Wrong case. We should be on external call and not internal. 1

629976 8229 xa xancaholdrejectInd.cc Pointer is Null and shouldn't!. 2

629977 8230 xa xaretrieveind.c Pointer equal to NULL and shoudn't. Problem of pinter assignation. 1

629978 8231 xa xaretrieveind.c Wrong software behaviour. We should receive that indication only in External calls. 1

629979 8232 xa xafacilities.cc QsigCcbs (Transit with PMP): Activation from PMP accepted The QSIG-CCBS-Node has not been found after the CcbsRequestRr from PMP 1

629980 8233 xa xaholdonpstn.c Problem with channel freeing. 1

629982 8234 xa xacommon.c xaAllocAndInitGenDataRec: no memory available 1

629983 8235 xa xatimconf.c analGenDataTmoInd: wrong genDataState for timerEvent XaGenDTimCfOnPubIdsnExp 1

629984 8236 xa xatimconf.c analGenDataTmoInd: unknown timerEvent 1

629985 8237 xa xainfoserver.c Problem in function xaIfSetNr 1

629987 8238 xa xamain.c unknown minor from MajorXaGen received in XA 1

629988 8239 xa xacomddiplan.c function xaDdiGetBasicServBit: no valid basicServ entered 1

629989 8240 xa xacomddiplan.c function xaDdiAdaptDivInfo: no valid basicServ entered 1

629990 8241 xa xafacilities.c xaAnalInterrogationDiv: count of interrogationanswer is >= 29 1

629991 8242 xa xafacilities.c analExtOpIntRr: No corresponding facility found in genDataBlock 1

630002 8243 xa xaxfctconnect.cc switching command returned execution status != success 1

630003 8244 xa xaexaselect.c Error of allocation and forwarding of BCSREF. Software error. 1

630011 8245 xa xaxfctsfc.c Pointer null. Error in node states and node numbers. It should not happen. 1

630019 8246 xa xarouting.cc removed dangerous situation for endlessloop concerning usergroups 1

630020 8247 xa xaxfctsfc.c Error of node auxiliaryState linked to 3PTY and HOLD when a call is going to be parked internally or externally(Hold on PSTN). Contact 3134Fo in that case. 1

630021 8248 xa xasetupconf.c B-channel transfer failed 1

630022 8249 xa xaxfctsfc.c Wrong auxiliary State for internal node that may be internally parked. Please contact 3134Fo for that. 1

630030 8250 xa l3cactrans.cc wrong cc type 1

630050 8251 xa xamasynchbridge.cc Error Mapping XaTbxMenuEnuC to MaTbxMenuEnuC - undefined value 1

630061 8252 xa xamasynchbridge.cc Error Mapping XaHomologationEnuC to MaHomologationEnuC - undef value 1

630085 8253 xa a Timer not found 1

630090 8254 xa xaasnfacilityie.cc It was impossible to build up the ASN.1 tree structure. 1

630091 8255 xa xaasnfacilityie.cc It was impossible to encode the built up the ASN.1 tree structure. 1

630118 8256 xa xaitycapolinea.c Wrong counter state for the capolinea in italian software only. External calls and External on hold calls only. 1

630119 8257 xa xaitycapolinea.c Wrong counter state for the capolinea in italian software only. External calls and External on hold calls only. Problem with state from Held to Active. 1

630120 8258 xa xaitycapolinea.c Wrong counter state for the capolinea in italian software only. Problem of counter from Active to Held. 1

630124 8259 xa xaxfctsetup.cc due to a bug (br12385) introduced; please see the comments in the asourcefile. Jan.14.2000, mm2468 1

630131 8260 xa xastsynchbridge.cc failed to map XaTaxSearchEnuC to StTaxSearchEnuC 1

630134 8261 xa xatelerouting.cc xaComGetChRangeOfChGrp did not return valid values for startCh and stopCh, xatelerouting:line 329, Jan 24 2000 1

630142 8262 xa xacommon.cc invalid BcsRef, line 903, xacommon.cc, Jan. 31. 2000, MM2468, please see br12565 1

630144 8263 xa xaitfacdserver.cc Acd Server Out of service 1

630155 8264 xa xasubref.cc Try to delete the PinCode in the TerminalData object, but cannot find the TerminalData from the SubscriberId. 1

630156 8265 xa xancaexastar.cc An internal subscriber has been selected, but the IfSelection is lost 1

630157 8266 xa xancaexastar.cc checkPinCode has return TRUE, but there is a problem with IfPointer 1

630158 8267 xa xancaexastar.cc Problem in putPinCode, during the shift of the selection 1

630159 8268 xa xancaexastar.cc Cannot find the subscriber for the PinCode execution 1

630160 8269 xa xancaexastar.cc During a successfull PinCode execution, this node-state is not implemented 1

630161 8270 xa xancaexastar.cc There will be a problem with PinCode execution, because 2 nodes should be identical, but there are not ... 1

630162 8271 xa xancaexastar.cc During a successfull PinCode execution, this node-state is not implemented 1

630163 8272 xa xancapincode.cc The subsc-ref send from the NS is invalid or undefined ! 1

630165 8273 xa xatimconf.cc Problem with Pointer being null in anal_int_tim_. SOmething is wrong Problem of collisions? Was a crash here before that fix. 1

630171 8274 xa xaallcaching.cc index in xaallcaching.cc, xaCach... out of Range 1

630172 8275 xa xaitycapolinea.c Problem with the BCSRF and a PRA. Crashes.... 1

630173 8276 xa xaitycapolinea.c Porblm em of pointer that is nyll. It should not be. Problem with the bcsref table.PRA crash. 1

630174 8277 xa xaitycapolinea.c Pointer parameter of that function is notr valid. Eorr or 1

630175 8278 xa xaiytcapolinea Pointer lniks problem. It should not be null....problem with PRA access. No problem with BRA...and Italy software only. 1

630176 8279 xa xaitycapolinea.c Pointer extension link is wrong. PRA problem and crash with Italy. Fix for it. BRA no problem. , 1

630178 8280 xa xau italycapolinea.c Wrong call mode type for that node. 1

630179 8281 xa xabgmain.cc catched signal which did not have a handler in xabgproc 1

630182 8282 xa xaallcaching.cc allocatioin of DDI-Cache not possible: size would be bigger than size of the maximumblock one can allocate 1

630183 8283 xa xaitycapolinea.cc Wrong parameter. Null Userrecord node given a an incoming parameter. 1

630187 8284 xa xacomact.cc No more free handsetTIDs : must not happen 1

630191 8285 xa xaallcaching.cc Division by Zero Error ;-) i.e. no subscribers defined/configured, maybe caused by an AIMS-crash before ??? 1

630195 8286 xa xaallcaching valid DDI in DDI-cache should be overwritten, please have a look on it if this is a valid action 1

630198 8288 xa xamonrouting.cc check that the process which calls xamonrouting is really the ncProc, otherwise produce (at least, normally the PBX should crash) this error 1

630210 8289 xa xanspmain.cc Network slave received signal with incomplete data. 1

630214 8290 xa xancxfacility.cc not possible to allocate bcsref for FACILITY message 1

630215 8291 xa xancxmail.cc This device is not able to handle Mail MWI 1

630216 8292 xa xancxmail.cc this Sref is not able to handle Mail MWI 1

630219 8293 xa xancaexaselect.cc This id is for the alarm, LcrFallBackAlarm, which is triggered if a call goes out over a secondary provider, or a default route, that is to a public network (indicating that the call will 1

630224 8294 xa xaasnuserremoteopapdu.cc no invokeId value has been generated for the invoke generate the invokeID (should be done in the sendAPDU() function) 1

630225 8295 xa xancaccbsidle.cc no session or the A-side type is not ok 1

630226 8296 xa xancaccbsproc.cc CCBS Session-Timer Expired ... but CCBS no more activ ! 1

630227 8297 xa xancaccbsproc.cc ETSI terminal specific timer for a non ETSI terminal 1

630228 8298 xa xancaexastar.cc the A side must be IntEtsi, but apparently it's not!!! 1

630229 8299 xa xancaexastar.cc we would need a sessionId, but nothing has been passed or found!!! 1

630230 8300 xa xancafacilities.cc invalid value for subscriberState (neither Free nor Busy) 1

630231 8301 xa xancafacilities.cc no session or the A-side type is not ok 1

630232 8302 xa xancafacilities.cc the A-side type is not ok 1

630233 8303 xa xancarelcom.cc invalid CCBS B-Side type 1

630234 8304 xa xancasetupconf.cc invalid CCBS B-Side type 1

630236 8305 xa xancpccbssession.cc type of the CcbsSide not correct. 1

630238 8306 xa xanspmain.cc Network slave received unexpected signal. 1

630261 8307 xa xanspmain.cc Network slave overload! Alarm call check could not run during more than 1 minute! 3

630267 8308 xa xanspjobinserts.cc XaRegularCheck instance not created or lost. 1

630391 8309 xa xaxfctsetup.c 2 parameters of xaXEtsiAlarmSetup was NULL or all Bcsrefs busy 1

630393 8310 xa xancxconnect.cc External remote control failure 1

630398 8311 xa xaccisendcom.cc unknown notification indicator value. 1

630399 8312 xa xancatimconf.cc Switch default that should not be used in anal_tim_ext_conf 1

630409 8313 xa xancxdisc.cc Unable to switch the owner bcsRef of the B-channel in a long call situation after an inquiry call on the public network. 1

630410 8314 xa xancxconnect.cc Failed to create conference connection. 1

630411 8315 xa xancxconnect.cc Failed to add member to the conference connection. 1

630412 8316 xa xancxconnect.cc Fxancxconnect.cc Failed to create connection. 1

630413 8317 xa xancxconnect.cc Failed to create announcement connection. 1

630414 8318 xa xancxconnect.cc Failed to retrieve from hold connection. 1

630415 8319 xa xancxconnect.cc Failed to add member to connection in xaNcxXAddConnect(). 1

630416 8320 xa xancxconnect.cc The member to add is already in another connection 1

630417 8321 xa xancxconnect.cc Failed to create twoWay connection in xaNcxXConnectTrunc() 1

630418 8322 xa xancxconnect.cc Failed to create oneWay connection in xaNcxXConnectTrunc() 1




630422 8326 xa xancxconnect.cc Not considered case, for switching through with analog trunks 1


630424 8328 xa xancxconnect.cc Failed to allocate switch object. 1

630425 8329 xa xancxconnect.cc There's already an allocated switch object using a different B-channel. 1

630426 8330 xa xaconconnection.cc Invalid connection type when trying to start two way connection. 1

630427 8331 xa xaconconnection.cc Invalid connection type when trying to start one way connection. 1

630442 8332 xa xasubfacadm.cc Someone deleted a hotline instance although this is no more allowed. 1

630443 8333 xa xasubfacadm.cc A hotline instance is missing and we weren't able to create recreate it! 1

630488 8334 xa xabgpmisc.cc queue of msgreceiver seems to be full or we cannot write msg for another eqason 1

630539 8335 xa xaxfctsfc.c function xs [Dx_sfc_rcdcc: cas of hold on PSTN b-chan-problem. 1

630550 8336 xa xaddicommon.cc ddi number without relation to call distribution 1

630551 8337 xa xaddicommon.cc ddi number without relation to a ddi numbering plan 1

630552 8338 xa xanumcommon.cc no valid direct entry for subtype operator 1

630553 8339 xa xanumcommon.cc direct entry for subtype not valid operator 1

630554 8340 xa xanumcommon.cc no valid direct entry for subtype Emergency 1

630555 8341 xa xanumcommon.cc direct entry for subtype not valid Emergency 1

630556 8342 xa xanumcommon.cc no valid direct entry for subtype CostCentre 1

630557 8343 xa xanumcommon.cc direct entry for subtype not valid CostCentre 1

630558 8344 xa xanumcommon.cc no valid direct entry for subtype StarReplacement 1

630559 8345 xa xanumcommon.cc direct entry for subtype not valid StarReplacement 1

630560 8346 xa xanumcommon.cc no valid direct entry for subtype ExternalAccess 1

630561 8347 xa xanumcommon.cc direct entry for subtype not valid ExternalAccess 1

630562 8348 xa xanumcommon.cc no valid direct entry for subtype LocalNode 1

630563 8349 xa xanumcommon.cc direct entry for subtype not valid LocalNode 1

630564 8350 xa xanumcommon.cc no valid direct entry for subtype NetworkSubscriber 1

630565 8351 xa xanumcommon.cc direct entry for subtype not valid Networksubscriber 1

630566 8352 xa xanumcommon.cc no valid direct entry for subtype UserGroup 1

630567 8353 xa xanumcommon.cc direct entry for subtype not valid UserGroup 1

630568 8354 xa xanumcommon.cc no valid direct entry for subtype Abbreviated 1

630569 8355 xa xanumcommon.cc direct entry for subtype not valid Abbreviated 1

630570 8356 xa xanumcommon.cc no valid direct entry for subtype Door 1

630571 8357 xa xanumcommon.cc direct entry for subtype not valid Door 1

630572 8358 xa xanumcommon.cc no valid direct entry for subtype HDLCTerminalAdaptor 1

630573 8359 xa xanumcommon.cc direct entry for subtype not valid HDLCTerminalAdaptor 1

630574 8360 xa xanumcommon.cc no valid direct entry for subtype Subsrciber 1

630575 8361 xa xanumcommon.cc direct entry for subtype not valid Subscriber 1

630576 8362 xa xanumcommon.cc no valid direct entry for subtype CallDistribution 1

630577 8363 xa xanumcommon.cc direct entry for subtype not valid CallDistribution 1

630578 8364 xa xanumcommon.cc no valid direct entry for subtype route 1

630579 8365 xa xanumcommon.cc direct entry for subtype not valid route 1

630580 8366 xa xanumcommon.cc inconsistent database 1

630581 8367 xa xanumcommon.cc to complex 1

630616 8368 xa xatdf.c Allocating BcsRef not successful 1

630645 8369 xa xancaacd.cc unused dynamic line found that has not been set to idle 1

630706 8370 xa xaccisendcom.cc The id pointer is null if this error report is hit. For error id 8370 '.' 1

630710 8371 xa xaasnfacilityie.cc The InterpreationAPDU is invalid in switch statement for function XaAsnFacilityIE::decodeAndTreatAPDUs(). 1

630734 8372 xa xatelerouting.c Error in Receiving an SMS 1

630742 8373 xa xancxcmd.cc br18030 means that ChannelUnacceptable occurs for an internal call which is impossible. This errorlog records each occurnace to try to track the problem down. 1

630747 8374 xa xaroutelerouting.cc something is wrong, this b-channel shouldn't be busy, free it. We sent back to the ACD server a RelComp with RequestedChannelNotAvail but This Channel shouldn't be busy at all, 1

630748 8375 xa xaroutelerouting.cc Still problems with the B-Channel admin of the ACD port, capitulate. 1

630750 8376 xa xaxfctsfc.c xSfcUnlink is called with uncoded parameter 1

630751 8377 xa xancaexansf.cc This error report corresponds with br 18615 raised due to an initial crash log. '.' ' 1

630759 8378 xa xanodlinkcom.cc for br18792 null pointer crash '.' 1

630765 8379 xa xanodactivenodelistc.cc To check for valid additions or deletions into the xa active node list. 1

630775 8380 xa xaexaselect.c Destination not handled in this state. 1

630796 8381 xa xaconconnection.cc This error occurs when XA calls xaConShareSwitchObject with a value of origObjId that has already been shared, or the extension link node has already had its switch object shared. 1

630801 8382 xa xaconconnection.cc This error is raised in the event of xaConCreateTwoWayConnection being called wthout allocating switch objects for the specified bcsrefs 1

630911 8383 xa xancadiscind.cc DECT Follow-Me:negative response from QSig-Trunk 1

630912 8384 xa xancaregister.cc DECT Follow-Me:negative Response of an StarOrHash-Activation 1

630913 8385 xa xancarelcom.cc DECT Follow-Me:Timeout of Register-Msg (no Answer given to terminal) 1

630918 8386 xa xancxdisc.cc DECT Follow-Me: Strange Answer or no Answer from QSig-Trunk 1

630926 8387 xa xa*.cc generic errorid for xa domain (as to stop using 65535) 1

630965 8388 xa xaconerrorhandler.cc Switching failure has occured. 1. ConnId 2. MasterBcsRef 3. Error (enum) - swit_if/crconerrorc.hh: enum SwitchingError 4

630966 8389 xa xaconerrorhandler.cc Unhandled switching API call from domain other than XA 1

630967 8390 xa xaconerrorhandler.cc Invalid parameters passed to the XA switching error handler 1

630997 8391 xa xancxdisc.cc A node has entered bye_bye_user with an undef b-channel and an allocated switch object. This will lead to the switch object not being freed, which causes audio problems. 1

631003 8392 xa xanodc.cc Related to br19986: The hanging nodes detector has found a node with no corresponding active BcsRef and no active CallControl. Node has been cleaned. 1

631004 8393 xa xancaretrieveconf.cc The required b-channel could not be allocated during retrieve from the PSTN 1

631005 8394 xa xancxsfc.cc The required b-channel ccould not be allocated to retrieve a call parked on a line key 1

631162 8395 xa xaallcast.cc a cast operator is out of date, its name is given in parameters. 1

631219 8396 xa xanumindex.cc see br21379: for some reason someone succeeded when trying to change a number through the numberingplan, please report this error. 1

631248 8397 xa xatimconf.c In function xaCheckDiscNodes, a not disconnected node has been found 1

631250 8398 xa xaccisendcom.cc Er function fillInHead failed, params messtype, portref, bcsref 1

631291 8399 xa xaallcommon.cc Unknown enum value for trunk-trunk permission of subscriber 1

631293 8400 xa xaallcommon.cc illegal enum value for trunk-trunk setting 1

633942 8401 xa xancxmsg.cc in function xaNcxHandleMsgSig(): an unrecognized minor was received, this might indicate a new feature that is not yet implemented completely 1

633943 8402 xa xancxmsg.cc in function hdlMsgCommand(): an unrecognized command was received, this might indicate a new feature that is not yet implemented completely 1

635179 8403 xa xancatimconf.cc NcTimConf-Timer exipired but the corresponding node (param 1 is the bcsref) is no more active. the portref of the old (no more existing) node is seen in param 2. The signal is 1

635183 8404 xa xancatimconf.cc NcTimConf-timer exipred in an untreated state (external). 1st param = bcsref 2nd param = node-state 1

635184 8405 xa xancatimconf.cc NcTimConf-timer exipred in an untreated state (external). (1st param = bcsref) (2nd param = node-state) 1

638426 8406 xa xancaexansf.cc A node has will be set to hold. We cannot set the new Timer because he's already used 1

638427 8407 xa xancaexansf.cc A node will be set to hold. We overwrite the old Timer with the new hold-timer. 2

638455 8408 xa xancaexansf.cc doDeliverBChannelToOtherConnection is called differant than defined in the switch 1

638456 8409 xa xancatimconf.cc The timer with reason XaPeerHoldTmo has been overwritten 1

642197 8410 xa xancaregister.cc A functional request to open a door with an invalid id. 1

642199 8411 xa xancaregister.cc Invalid device-switching request. Neither door nor relais. 1

642211 8412 xa xancaregister.cc functional request to login to a user group has been rejected because of invalid values. 1

642223 8413 xa xancaregister.cc unknown CallForwarding option. something else than CFU CFNR CFB 1

642309 8414 xa xancaregister.cc Not valid number type for this operation. Missmatch between check and put function. 1

642310 8415 xa xancaregister.cc Invalid Protocol coding. 1

642311 8416 xa xancaregister.cc REGISTER message received in wrong state (not in state 1). 1

642314 8417 xa xancaregister.cc Not supported return value to convert. 1

642611 8418 xa xancxconnect.cc A node will be set to hold. We overwrite the old Timer with the new hold-timer. 1

643243 8419 xa xarouting.cc dial information has been lost !!! (XaSelectionStrC is longer than IntNumStrC) 1

643308 8420 xa xacsycourtesy.c Not allowed to set delay time for this voice group. 1

643310 8421 xa xacsycourtesy.c Trying to exceede maximum courtesy delay time. 1

646441 8422 xa xaexastar.c function xaGetVoiceMailFacArt is called with a wrong inputType (typeOfCf) 1

647775 8423 xa xaallcommon.c function xaAllRingsToTimer (old: rings_to_timer) is called with param rings out of range 2

648098 8424 xa xaidn.cc We try to find the right XaCLIPSpecification for a certain Node. However someting in the Database isn't alright. There is may be an inconsistency or what else could be that the 2

648128 8425 xa xaxfctfacility.c function xaNcxXSingleFacReq is called without a defined NSF in param facCodeRec. 1

648129 8426 xa xaxfctsetup.c The function xaXCallSpecialTarget is called with a wrong param or could not be executed correctly (see param) 2

648663 8427 xa xancainfodtmfind.cc When converting info messages for ERC, XA was unable to associate an info message with the bcsref that send it. 1

648686 8428 xa xacciinfosave.cc in fuction nc_init_prim_ns_and_cc, ncSigP->param (bcsRef) is out of range 1

648725 8429 xa xaitfcourtesy.cc CsyCourtesyRecordingStopped message holds portReference and channel but no valid bcsref is associated to that tuple. 1

648996 8430 xa xaalllocale.cc A database problem, a subscriber without a node? 1

648997 8431 xa xaalllocale.cc Neither the subscriber nor the node had a reference to a Locale. This should never occur. 1

648998 8432 xa xaalllocale.cc Looks as if we have a trunk without a Node! Seems to be a database problem. 1

648999 8433 xa xaalllocale.cc no portref - can't be must be some kind of database problem 2

649000 8434 xa xaalllocale.cc For some weird reasons there is no Locale (Database?) Read the country from the license chip for the time being 1

649004 8435 xa xaalllocale.cc For some reason there is no Locale (Database?) for this XaNodeC to be able to continue, we read the country from the license chip 1

649005 8436 xa xaalllocale.cc in func xaAllMap2SmCountry() The input country is a non supported country, most likely this is simply a coding bug (someone forgot to update this func when introducing a 1

649041 8437 xa xaalllocale.cc We should never get this far in this function! For some reaseon neither bundle nor node had a reference to a Locale. Is this a database bug? 1

649264 8438 xa xaalllocale.cc when looking up the charges per impulse for a given trunk (via its XaNodeC*), there was no XaChargeCostSpec object found in the database how can this happen? 1

649848 8439 xa xaxfctfacility.c In function xaXSendNsf, the param l3Msg is not expected (default-case of switch instruction) 1

650897 8440 xa xaalldireinserts.cc Operator >= has been called. Function implemented (not tested yet) 1

651172 8441 xa xaalllocale.cc when looking up the `charges per impulse' and the `exchange rate' for a given trunk (via its XaNodeC*), there was no XaChargeCostSpec object found in the database --> how can 1

652710 8442 xa xaexansf.c In function nc_exa_nsf_1, not valid sub-param for FacVoiceService 1

652711 8443 xa xaexastar.c In function xaCheckVoiceDeleteText, invalid voice-group 1

652883 8444 xa xarouting.c function call_second_phone_cfnr, case of FacCfnrVcml, not possible divertor 1

653073 8445 xa xacciinfoserver.cc compute_nmb_entry in analyse number of if-block got invalid number part to look up 1

653074 8446 xa xacciinfoserver.cc problem in ebnf-rule for syntax-checker of selections 1

653075 8447 xa xacciinfoserver.cc illegal character in selection to analyse 1

653076 8448 xa xacciinfoserver.cc problem in xaCciIfDublicate 1

653077 8449 xa xacciinfoserver.cc xaCciIfReset called not on an IfSelection block 1

653078 8450 xa xacciinfoserver.cc xaCciIfSetClipEmpty called not on an IfClip-block 1

653079 8451 xa xacciinfoserver.cc problem in xaCciIfTake 1

653080 8452 xa xacciinfoserver.cc problem in xaCciIfTakeNr 1

653081 8453 xa xacciinfoserver.cc xaCciIfGiveFac 1

653082 8454 xa xacciinfoserver.cc if-pointer is NULL 1

653084 8455 xa xacciinfoserver.cc problem in xaCciIfShiftFac: no second number 1

653085 8456 xa xacciinfoserver.cc this type of if-block is not supported by this function 1

653086 8457 xa xacciinfoserver.cc invalid parameter passed to this function 1

653087 8458 xa xacciinfoserver.cc selection too short in if-block 1

653088 8459 xa xacciinfoserver.cc if-block pool run out of if-blocks 1

653097 8460 xa xancaalerting.cc not supported node-state 3

653099 8461 xa xancacallproc.cc not supported node-state 1

653107 8462 xa xaidnconversion.cc Unsupported type of number in ton-conversion() 1

653133 8463 xa xancasetupind.cc There's an other b-channel already allocated !! 1

653134 8464 xa xancasetupind.cc

An other CC has allocated the b-channel !! */ ------------------------------------------ */ this code is executed by incomming setup msg from the public in private net. However the are

some substantial differences there have to be taken into account: on public trunks the local switch can be considred as a master in the channel assignment process, e.g. setup's

to the local switch are send out by the pbx without channel ID the channel is assigned by the local switch within the setup ack msg. The only imaginable reason why the software

run's into that if-statement must be some malfunctioning within the local switch In that sceme the local switch is every time aware what channels are free or allocated. In

contrast to that pbx's in the private net are peers, setups are send out with a preferred channel ID, that can result in a scenario where both try to allocate the same channel at

the same time. To avoid that two adjacent PINX's have to be configured that way that one starts selecting the B channel from the top of the free B-channel list, the other 2

653136 8465 xa xancasetupind.cc unknown type of channel selection 1

653137 8466 xa xancasetupind.cc setup received in wrong node state. Most likely is that the node hasn't been cleared at the end of the last call. Or it has been reinit by a lost(not stopped) timer event 500 calls 1

653450 8467 xa xancanotreachable.cc Unknown not reachable destination. 1

654014 8468 xa xaallcommon.cc unsupported enum value XaUnreachableModeC 2

654345 8469 xa xancpmain.cc An unexpected minor of MajorResource has found its way into Xa's main loop. 1

655597 8470 xa xanumindex.cc Someone tried to insert two directory entries with the same number in function xaNumIdxInsert. Reference is br27386. 2

655598 8471 xa xanumindex.cc During numberingplan population at XA startup two directory entries with the same number are present (this should never happen) the responsible directory entry has been 1

656364 8472 xa xancxconnect.cc Tax Recall with charges of 0.00: in function xaNcxXCallAnswer() the database call to retrieve the charges of the last call [using getLastCallCharge();] from the individual charge 1

656404 8473 xa xancxinfo.cc too many recursive calls of function xaNcxXInfoDigitsRecursive. to prevent crash br27465 1

656686 8474 xa xaexastar.c function nc_put_sfc_fac: not treated star-num 1

656687 8475 xa xaexastar.c function nc_put_sfc_fac: not treated starNmb-num 1

656688 8476 xa xaexastar.c function nc_put_sfc_fac: not treated analysed num 1

657312 8477 xa xaallcommon.cc PublicTeChargeType: enum value out of range 2

657317 8478 xa xaallcommon.cc TPTYRequestEnum: enum value out of range 1

657324 8479 xa xaallcommon.cc XaNetProtocolTypeC: enum value out of range 1

657325 8480 xa xaallcommon.cc XaLocalNode::TrunkTrunkConnectionC: enum value out of range 1

657329 8481 xa xaallcommon.cc XaFixedTerminalTypeC: enum value out of range 1

657330 8482 xa xaallcommon.cc XaDectTerminalTypeC: enum value out of range 1

657331 8483 xa xaallcommon.cc XaNumAnalEnuC: - enum value out of range AND/OR - wrong value of enum for the corresponding function 1

657343 8484 xa xaallcommon.cc DiversionReason or DiversionReasonECMA: enum value out of range 2

657344 8485 xa xaallcommon.cc XaRedingInfoC: enum value out of range 1

657346 8486 xa xaallcommon.cc XaNetworkTypeC: enum value out of range 1

657363 8487 xa xa*.cc Untreated signal in process with Major/Minor combination param1 Major/minor param2 sender-processID param3 unique ID Before R4.0 SP1 (pbx8669) param1 Major 3

657372 8488 xa xacciinfoserver.cc IfCommandEnum: enum value out of range 1

657374 8489 xa xacciinfoserver.cc XaNumberPlanOverrideTypeC: enum value out of range 1

657375 8490 xa xa*.cc AcdStateArt: xaeratpc3.cc -> enum value out of range xal3st2.cc -> enum value not treated 3

657376 8491 xa xaextchangroup.cc HuntType: enum value out of range 1

657380 8492 xa xaextpriorityalarm.cc PriorityReleaseType: enum value out of range 1

657384 8493 xa xaexttrunkgroup.cc TrunkGroupType: enum value out of range 1

657385 8494 xa xaexttrunkref.cc XaLineAttenuationTypeC: enum value out of range 1

657386 8495 xa xaexttrunkref.cc XaDiallingModeC: enum value out of range 2

657387 8496 xa xaexttrunkref.cc AttenuationArt: enum value out of range 1

657388 8497 xa xaexttrunkref.cc ReleaseType: enum value out of range 2

657390 8498 xa xaexttrunkref.cc XaDiallingModeC: enum value out of range 2

657407 8499 xa xancadiscind.cc XaEtsiDiscEnu: enum value out of range 1

657408 8500 xa xancaexansf.cc OfferedCallType: enum value out of range 1

657415 8501 xa xancaexaselect.cc XaLCRStatusEnum: enum value out of range 1

657421 8502 xa xancaexaselect.cc LcrStateEnum: enum value out of range 1

657433 8503 xa xancxcmd.cc Sp2OfferArt: enum value out of range 1

657435 8504 xa xancxconnect.cc ConnectType: enum value out of range 1

657436 8505 xa xancxfacility.cc RoutingType: enum out of range 1

657438 8506 xa xancxsetup.cc DestArtType: enum value out of range 1

657456 8507 xa xaroudistrouting.cc Undef line in xaRouDistDoRestOfRouting 1

657465 8508 xa xaroutelerouting.cc ChanIdArt: enum value out of range 1

658062 8509 xa xainit.c At Reset a destination Num has been removed eg.: Hotline-num, or emergency-num, etc. 1

658353 8510 xa xasubref.cc Wrong TepId type (neither Subscriber nor Door) in xaSubSrefToPref 1

658548 8511 xa xancpsendst2.cc Wrong relation between DoorId and XaDevice & SmPortReference. The SP2-Message to open the door won't be sent ! 1

658734 8512 xa xaroudistrouting.cc XaDistributionTypeC: enum value out of range 1

659572 8513 xa xancamncinfo.cc No SmLocation found from the parameters nodeId (ArNodeIdC) & slotId (SmSlotIdC) received in the Signal MajorPgpSwitch/PgpDnwSwitch 1

659737 8514 xa xancxfacility.cc Wrong 'RoutingType' (DNW or Subst) in xaNcxXStoreRouting 1

659738 8515 xa xarouswgswitchgroup.cc Try to read the HwSwitchPosition for a wrong LocationId 1

659739 8516 xa xarouswgswitchgroup.cc Try to set a wrong SwitchPosition for a LocationId (and consider it to DAY ...) 1

659740 8517 xa xarouswgswitchgroup.cc Problem with the local array xaSwgHwSwitchPosition 1

659741 8518 xa xarouswgswitchgroup.cc Invalid SwitchGroup to check the permission to modify it 1

659742 8519 xa xancamioncssn.cc Wrong parameter in Signal for 'XaSwitchPositionTypeC' (and consider it as DAY ...) 1

659761 8520 xa xancxregister.cc Untreated enum value of FacMesArt 1

659762 8521 xa xancxregister.cc untreated enum value of enum FacilityArt 1

659763 8522 xa xancxregister.cc untreated enum value 1

661423 8523 xa xancavoice.cc A parameter of message VoiceSetup from VC was not correct. 1

661432 8524 xa xancavoice.cc A parameter of message VoiceCommandResponse from VC was not correct. 1

661450 8525 xa xancxsfc.cc No Valid Parameters in function xSfcConnectVoice 1

661578 8526 xa xacallproc.c anal_ext_call_proc is in nc-state 43 without having the XaSmsFsk1Bit set 1

661580 8527 xa xafacilities.c anal_ext_fac_ind is in nc-state 43 without having the XaSmsFsk1Bit set 1

661581 8528 xa xainfo.c anal_ext_info_ind is in nc-state 43 without having the XaSmsFsk1Bit set 1

661587 8529 xa xainfoserver.c In function xaIfCleanNmb, not coded info_art 1

661895 8530 xa xasubfacadm.cc 'index' has TWIN on 'twinTepIdP', but 'twinTepIdP'-number is empty ! 1

662022 8531 xa xanumcommon.cc no valid direct entry for subtype VoiceMail 1

662023 8532 xa xanumcommon.cc direct entry for subtype not valid VoiceMail 1

662210 8533 xa xanumcommon.cc function xaNumGetVoiceMailNum is called and no VoiceMail-Num is configured 1

662299 8534 xa xarouting.cc A reserve request to RM has returned an unrecognised value of MrRsvRespCode. The switch case that handles the result needs to be amended. 1

662742 8535 xa xancavoice.cc at the receiption of VoiceSendAlerting, the xaNode has a wrong tepId 1

662743 8536 xa xancavoice.cc at the receiption of VoiceCommandResponse, the xaNode has a wrong tepId 1

662994 8537 xa xancaexastar.cc The node to overtake could not be found in a fast take or replace pickup situation. 1

663490 8538 xa xancxsetup.cc The function xaNcxXSendAvsSetupOnXaNode could not be executed correctly (see param) 1

663524 8539 xa xarouting.cc function xaRouCheckAndRouteToVmAvsUg shows a problem defined in Parameter 1. Call on Integrated-AVS couldn't be done 1

664136 8540 xa xancaexastar.cc function xaNcaGetFacilitiyArt: analysed value has no case with *function table 1

664310 8541 xa xancavoice.cc at the receiption of VoiceClear, the xaNode has a wrong tepId 1

664313 8542 xa xancavoice.cc at the receiption of VoiceClear, the xaNode has a bcsRef out of range 1

664526 8543 xa xaxfctmail.c An MWI-function has been called with an invalid origSubscRef 1

665500 8544 xa xarouting.cc Subscriber has CFNR or CFB activ, but he is neither Free nor UserBusy (nor NoChannelAvailable). 2

665565 8545 xa xancaregister.cc recursiv loop detection when activating CFU 1

665622 8546 xa xarouting.cc Something is missing in the implementation about GSM-Subscriber ... :-( because this function should never be called for this type of subscriber ! ( No call of 1

665681 8547 xa xancxconnect.cc Try to track information to solve (understand) br27477 If this BR occurs, then that can be a problem in DB !!! 1

665871 8548 xa xancxsetup.cc In the function xaNcxCreateLinkInitNodeForVc, it was not possible to allocate a new BcsRef. 1

666353 8549 xa xancxsfc.cc VM: In function xaNcxAllocDtmfForVmTermDep: Couldn't Allocate a DTMF Detector 4

666613 8550 xa xaasnuserremoteopapdu.cc More as 2 ReturnErrorPDU in only one ASN.1 message are came. We don't support that for now ... (see br30752 as well) 1

666614 8551 xa xaasnuserremoteopapdu.cc More as 2 RejectPDU in only one ASN.1 message are came. We don't support that for now ... (related to br30752, but without crash) 1

666620 8552 xa xaasncommon.cc A FacilityParam is already stored for this message, and we try to store it for the second time the same FacilityParam. We have to implement, for example, as FacSomeKindOfErr & 1

666622 8553 xa xaasncommon.cc The parameter 'infoFacPar' is out-of-range ! 1

669080 8554 xa xacommon.c function xaGetNodeWithPortRef gets UndefPortRef as input param 1

669376 8555 xa xaallcheck.cc Invalid FeaturePermission enum used for this function 1

669797 8556 xa xancxsetup.cc No channel or line for voicemail available. 1

669819 8557 xa xatimconf.c Timer expired, with invalid TimerNr 2

669844 8558 xa xaexaselect.c function xaCheckAndStartNewCall strange situation with NotOk and cause == 0 1

669920 8559 xa xarouting.cc rout_sg_a was in an endless loop. Loop got broken after > 600 rounds see br31823 1

670184 8560 xa xaxfcttimer.c function xaXStartFreeNodeTimer: no free timer found 3

670185 8561 xa xaxfcttimer.c function xaXStartFreeNodeTimer: unvalid timerNr 3

670217 8562 xa xacommon.c function xaXStartFreeNodeTimer: unvalid timerNr 2

670444 8563 xa xainfo.c function xaCheckAndDoVmAutoAttEomCase: nodeP is not XaVMAlertPlayAndRecBit 1

670608 8564 xa xamain.c Received unknown minor-signal with MajorMsg 1

671407 8565 xa xainit.c function xaInitFsAnalogTrunkLine: input param lineNum out of range 1

671500 8566 xa xaroudistrouting.cc Prevent CRASH related to br31982 1

672186 8567 xa xaconconnection.cc When attempting to allocate a switch object, CR has returned that the object Id is already in use. We then try to delete the hanger and allocate a new switch object. Param 1: 1

672224 8568 xa xaccisendcom.cc In function insVp7FacInfo, the IE-length is not ok 1

672247 8569 xa xaccifacinfoc.cc in function XaCciVpFacInfoListC::findInList strange situation with pointer 2

672316 8570 xa xaccifacinfoc.cc function XaCciVpFacInfoListC::treatRemainingElement() finds Elements 2

680346 8571 xa xancadiscind.cc function xaNcaCheckAndDoAutoAttDiscTrig, something when wrong, see params 1

680350 8572 xa xancavoice.cc function xaNcaVoiceDialDigits: BcsRef out of Range 1

680352 8573 xa xancavoice.cc xaNcaVoiceDialDigits: general error 1

680359 8574 xa xancxsfc.cc function xSfcReLinkVmAutoAttNode, could not do it, see param 1

680689 8575 xa xancavoice.cc function xaNcaVoiceAutoAttDial: could not be executed du to error, call has been cleared 1

680690 8576 xa xancavoice.cc function xaNcaVoiceInfo: could not be executed du to error. See param. Call has been cleared 1

680691 8577 xa xancavoice.cc function xaNcaVoiceUpdateMailboxInfo: could not be executed du to error. See param. Call has been cleared 1

680692 8578 xa xancavoice.cc function xaNcaVoiceStopAaAction: could not be executed du to error. See param. Call has been cleared 1

680694 8579 xa xancavoice.cc function xaNcaVoiceChangeAudioPort: could not be executed du to error. See param. Call has been cleared 1

680697 8580 xa xancavoice.cc at the receiption of VoiceDialDigits, the xaNode has a wrong tepId 1

680698 8581 xa xancavoice.cc at the receiption of VoiceInfo, the xaNode has a wrong tepId 1

680699 8582 xa xancavoice.cc at the receiption of VoiceUpdateMailboxInfo, the xaNode has a wrong tepId 1

680700 8583 xa xancavoice.cc at the receiption of VoiceStopAaAction, the xaNode has a wrong tepId 1

680701 8584 xa xancavoice.cc at the receiption of VoiceChangeAudioPort, the xaNode has a wrong tepId 1

680702 8585 xa xancavoice.cc at the receiption of VoiceInfo, the xaNode has a bcsRef out of range 1

680703 8586 xa xancavoice.cc at the receiption of VoiceUpdateMailboxInfo, the xaNode has a bcsRef out of range 1

680704 8587 xa xancavoice.cc at the receiption of VoiceStopAaAction, the xaNode has a bcsRef out of range 1

680705 8588 xa xancavoice.cc at the receiption of VoiceChangeAudioPort, the xaNode has a bcsRef out of range 1

680806 8589 xa xa* Something is wrong with database 1

680958 8590 xa xancxsfc.cc function xSfcConnNewVmAudioPort, could not do it, see param 1

681702 8591 xa xancaexaselect.cc function xaNcaExamine109Selection we received a not expected parameters 1


681728 8593 xa xancaexaflash.cc function xaNcaExaFlash109, we received a not expected parameters 1


681982 8595 xa xancxsfc.cc function xSfcCheckAcdRemAaVcNode, situation not ok 1



682013 8598 xa xancaexaflash.cc function xaNcaExaFlash79NotConn, we received a not expected parameters 1

682014 8599 xa xancaexaselect.cc function xaNcaExamine79NotConnSelection we received a not expected parameters 1

682048 8600 xa xancatimconf.cc function anal_ext_tim_conf nc-state 107, parameters are not consistent 1

682082 8601 xa xancatimconf.cc function anal_int_tim_conf nc-state 11,ect, parameters are not consistent 1

685929 8602 xa xancasetupconf.cc in anal_ext_setup_conf() state 17 when no ccbs is active. bcsref - - 3

685930 8603 xa xancasetupconf.cc anal_ext_setup_conf() in state 3 and not ccbs nc_msg_param phase_index_p->bcsRef 0 2

685931 8604 xa xancasetupconf.cc anal_ext_setup_conf() unknown nodestate of phase_index nc_msg_param phase_index_p->bcsRef ns_ph_ind 1

685932 8605 xa xancasetupconf.cc anal_ext_setup_conf() unknown node of phase_index when nodestate of nc_msg_node_p is in state 21 nc_msg_param ns_ph_ind 0 1

685933 8606 xa xancasetupconf.cc anal_ext_setup_conf() treat the default case if nc_msg_node_p is in state 71 nc_msg_param FacQsigCcbsRequestRr?1:0 FacQsigCcnrRequestRr?1:0 1

685934 8607 xa xancasetupconf.cc anal_ext_setup_conf() untreated nodestate of nc_msg_node_p nc_msg_param ns 0 1

686161 8608 xa xancaexastar.cc Attempt to call steal from an unsupported destination type. Parameters 1. Bcsref 2. Analysis result 1

686191 8609 xa xancanettimer.cc function anal_net_timer_conf, case NcTimRefOffer, ns-node not allowed 1

690688 8610 xa xaccisendcc.cc when sending setup to siptrunk the reservation that was previously successful failed. however we continue with the call and hope it will be cleared down later and repeat hunt 1

691723 8611 xa xaasnusercalltransferop.cc error mandatory element is missing from the decoded tree! for CallTransferIdentifyResult ASN.1 feature 1

692889 8612 xa xancxsetup.cc No meida channel could be allocated for an appointment call to a SIP-S. The call will not have any in-band confirmation tone. Param 1: BcsRef. 1

693697 8613 xa xacciinfoserver.cc function xaCciGenDispUnusedButFirstLast called with NULL Pointer 1

694272 8614 xa xanumcommon.cc An XaDire subtype instance has been found that does not correspond to an NpDire subtype instance. The XaDire and subtype instances will be deleted. Param 1: Xa subtype Id 2

694273 8615 xa xancasendssn.cc Not yet supported enum value to send out a system service notification 1

694292 8616 xa xaafpcontrollerc.cc encoding or sending of an xml string caused an error 1

695449 8617 xa xacbmbellqueue.cc To many jobs in general call queue. Param0: size of joblist. 2

695450 8618 xa xacbmbellqueue.cc Unknown general call code. Param0: 0 = Internal 1 = External 2 = PsaCode1 3 = PsaCode2 4 = PsaCode3 5 = PsaCode4 6 = PsaCode5 2

695451 8619 xa xacbmbellqueue.cc No more jobs in general call queue. 1

696491 8620 xa xancaexastar.cc function xaAllCheckGetAutoAttSubsTepIdP could not find the tepId in the xaNode 3

696608 8621 xa xancaexaselect.cc function xaNcaExamine1AnalExt: anaExtType not considered 1

696610 8622 xa xancaexaselect.cc function xaNcaExamine1AnalExt: anaExtType not considered 1

696785 8623 xa xancaexaselect.cc function nc_exa_remote_fac_selection is called with a NULL XaNode address 1

696788 8624 xa xancaexaselect.cc function xaNcaExamine1Selection is called with a NULL XaNode address 1

698274 8625 xa xatdfmain.cc Time Controlled Functions: timed reset of CS set from AIMS in CM_1_2_9/ webAdmin 2

698403 8626 xa xancaexaselect.cc function tele_serv_on_port called with a NULL callingNodeP 1

700384 8627 xa xarmsignalbridgec.cc No valid MSN for SIP subs/trunk in UpdateDestinationDetails signal 1

701057 8628 xa xancaexastar.cc In function putPinCode a redir is set but it is not an autoAttendant 1

701560 8629 xa xarmsignalbridgec.cc In function unreserveFromXaNode, the parameter has a NULL value 1

701586 8630 xa xacciinfoserver.cc In function xaCciIfSetTdAtTheEnd, there is an error 1

701603 8631 xa xancainfo.cc In function checkVmDigit, the difference between length and td is too big 1

701657 8632 xa xancxconnect.cc In function xaNcxCheckAndRemAutoAttAttrib, the VmAutoAttCallingBit was set in the VC node 1

701922 8633 xa xanodlinkcom.cc xaNodUnlkAssociated(...): Problem with Associated-Chain !!! 1

702877 8634 xa xancxsfc.cc Error in function xSfcSimAutoAttAcdCallTrans 1

702990 8635 xa xancaexastar.cc A Relay has a number defined, but its ID is 'Undef' !!! (br37850) 2

703322 8636 xa xancasendusn.cc Unhandled enum value for UserServiceNotification 1

703540 8637 xa xaroutingsingle.cc Unhandled enum value in the switch case. New type in RouteSingleModeEnum in xaroutingsingle.hh 1

704818 8638 xa xancxsetup.cc In callSingleExternalEndpoint(), we are trying to create a new node that is neither Public nor Private ... 1

704842 8639 xa xaroutingsingle.cc error in function xaRouGsmTermRouteInfo in a call to GSM-terminal 1

704843 8640 xa xaroutingsingle.cc error in function xaRouCheckRouteGsmTerminal in a call to GSM-terminal 1

704844 8641 xa xaroutingsingle.cc error in function xaRouRouteGsmTerminal in a call to GSM-terminal 1

707039 8642 xa xaallcommon.cc Parameter defining user, terminal and ports are not compatible 1

707768 8643 xa xancasendtsn.cc Unhandled enum value for TerminalServiceNotification 1

708492 8644 xa xancpsendst2.cc function xaNcpCheckIfHigherPrioCallTypeForOperator called with unknown parameter 1

710355 8645 xa xancxsfc.cc When answering a call-waiting, the XaNode were in unexpected state 1

710728 8646 xa xacciinfoserver.cc In function xaCciIfSetSelectionComplete: no ifPointer has been found 1

711188 8647 xa xaroutingsingle.cc In function xaRouRouteSingle, RoutingState of terminal is in a unknown state 2

711477 8648 xa xancaccbsidle.cc In function xaNcaCcbsRecallUserA, RoutingState of terminal is in a unknown state 1

713131 8649 xa xancpinit.cc failed to create call distribution with Id=1 (reference: br40323: MDT 7.76: In trunk group the entry for CDE can be zero, errorid 8589 occurs) 1

713499 8650 xa xatrmref.cc portref/msn to terminal conversion failed, because device isn't a terminal. param 1: pref (upper 16 bit) and msn (lower 16 bit param 2: deviceId param 3: device subtype 1

713751 8651 xa xancadiscind.cc In function checkAndDeliver, a not expected situation happend 1

713769 8652 xa xanodtimerinfoc.cc Function XaNodAsnRequestTimerC::handleExiry has unexpected values 1

713770 8653 xa xanodtimerinfoc.cc Function XaNodAsnRequestTimerC::start has unexpected values 1

714813 8654 xa xancxfacility.cc In function xaNcxXSingleFacReq (for MWI), RoutingState of terminal is in a unknown state Parameter 1: destSubscRef Parameter 2: TerminalId Parameter 3: RoutingState 4

714865 8655 xa Free to be used ... 3

718508 8656 xa xatrmref.cc The configured GSM subscribers have reached the max. amount of the GSM_subsrcriber licence. 1

721077 8657 xa xaccifacinfoc.cc in function XaCciSp2FacInfoListC::findInList strange situation with pointer 1

721078 8658 xa xaccifacinfoc.cc function XaCciSp2FacInfoListC::treatRemainingElement() finds Elements 1

721079 8659 xa xal3st2.cc In function insSt2FacInfo, the IE-length is not ok 1

723263 8660 xa xancaccbsrecall.cc Received XaNsCcbsRecallInd from NetworkSlave, but BcsRef not valid ! 1

726775 8661 xa xancxsfc.cc In function x_sfc_cwr (Call waiting reject), there is no associatedLink found. 1

727249 8662 xa xancainfo.cc We are checking received DTMF, but IfSelection is empty ! 1

727250 8663 xa xancainfo.cc Secure IP Remote Maintenance: Answer from IA-Domain is not known in XA-Domain ! 1

727671 8664 xa xamondumpcallstatistic.cc could not create directory to store xa call statistic files p1: errno p2: 1:/home/logs could not be created 2:/home/logs/xa could not be created 3:/home/logs/xa/call 1

728170 8665 xa xancxdisc.cc No number has been found to send back in a 302 SIP-Message ! 1

730614 8666 xa xancamncinfo.cc No valid portRef or state received in the Signal MajorPgpSwitch/PgpGenericSwitch used FXS Control Input 2

730625 8667 xa xarouswgswitchgroup.cc Function xaRouSetHwSwitchGroupPort Problem when trying to set a SwitchPosition via a FXS port (invalid parameter) 1

730912 8668 xa xaccisendcc.cc Function setAlertingPattern: invalid BCS-Ref 1

731251 8669 xa xancaexastar.cc function putActivatePresence gets invalid input parameters 1

731253 8670 xa xancaexastar.cc function putDeactivatePresence gets invalid input parameters 1

731989 8671 xa xancaexastar.cc Invalid TepId in functions of xancaexastar 1

731990 8672 xa xancaregister.cc Invalid TepId in functions of xancaregister 1

732292 8673 xa xaallcommon.cc function xaAllStartGeneralTimer or XaAllStopGeneralTimer have nodeP set to NULL 2

732293 8674 xa xancaacd.cc function xaNcaAcdCallDeflection has a nodeP with is NULL or inactive 1

732294 8675 xa xancxtimer.cc Function xaNcxXStartGeneralTimer has nodeP set to NULL 1

732295 8676 xa xanodtimerinfoc.cc Function XaNodTimerInfoC::XaNodTimerC::handleExpiry has myNodeP set to NULL or is inactive 1

732296 8677 xa xanodtimerinfoc.cc Function XaNodTimerInfoC::XaNodGeneralTimerC::startTimer has timerReason set to ItalyT4Tmo or ItalyT5Tmo 1

732297 8678 xa xanodtimerinfoc.cc Function XaNodTimerInfoC::XaNodGeneralTimerC::handleExpirySpecific has timerReason set to ItalyT4Tmo or ItalyT5Tmo 1

732301 8679 xa xabgpmain.cc fsEfsCopy failed while zipping a file in background 1

732478 8680 xa xaroutdistrouting.cc In function xaRouCheckAndStartCourtesy(...), the parameters dist (XaCallDistribution) or/and teld (XaTelephonyDestination) is/are not bound ! 1

733947 8681 xa xaextchangroup.cc Can't create channel-group for AMCC param 1: trunkId param 2: cgId param 3: buId 2

734896 8682 xa xancaprogressind.cc Progress received from an internal terminal that we don't handle 1

735317 8683 xa xancpccbssession.cc A Copy-Constructor is used within CCBS-Session. That can be problematic regarding to the related timer ! 1

736579 8684 xa xaallcommon.cc Adding a node to a call failed P1 = bcsRef of new node P2 = call id of existing call P3 = bcsref of existing call 1

740195 8685 xa xaroulicenseduser.cc

Aastra 470 Expansion Licence (study-00325) Negative Alarm Too much Users are configured, regarding to the non-existing 470 Expansion Licence ! The corresponding Positive

Alarm is 8693 Param1: Previous number of users (when adding/deleting users. not always provided) Param2: Current number of configured users Param3: either 36 or 600

depending on the licences. Never 1200. Without an Expansion License it says 36 With an expansion licence it says 600 If the list of configured users is bigger than the

licenced users then in Benni Monitor it can be checked, which users are working. 2

740366 8686 xa xamgrcallc.cc function XaMgrCallC::addNode, the added node is already contained in that call. 1

740367 8687 xa xaallcommon.cc function xaAllSetDefaultNode, addNodeToCall (CallId) returned false 1

742180 8688 xa xancahotel.cc The function xaNcaHotelStarCommandResponse made a problem (Response from Hotel Process) 1

742210 8689 xa xancaexastar.cc The function put_message_ans made a problem (execution of *#38) 1

742644 8690 xa xasubfacadm.cc function convFacOriginatorToWakeUpOriginator: input parameter not treated 1

745055 8691 xa xancavoice.cc Wrong value for voiceCallRecordingStatusSigP->state' Parameter 1 is this wrong value Parameter 2 is the BcsRef of the involved node Parameter 3 is undefined 1

745153 8692 xa xacciinfosave.cc function xaCciTreatInit: No Valid BCS ref has been received from XA 1

748235 8693 xa xaroulicenseduser.cc

Aastra 470 Expansion Licence (study-00325) Positive Alarm (Counterpart of Alarm ErrorId 8685) - Not too much Users are configured, or - "470 Expansion" Licence has been

activated, or - "A470 Large System" Licence has been activated Param1: Previous number of users (when adding/deleting users. not always provided) Param2: Current number

of configured users Param3: either 36 or 600 depending on the licences. Never 1200. Without an Expansion License it says 36 With an expansion licence it says 600 If

the list of configured users is bigger than the licenced users then in Benni Monitor it can be checked, which users are working. 2

748287 8694 xa xatrmref.cc Mobile Phone Extensions (aka GSM subscribers) (Counterpart of Alarm ErrorId 8656) - Not too much Mobile Phone are configured, or - "Mobile Phone" Licence has been updated 1

751080 8695 xa xacfgdefault.cc In function xaCfgCreateDefaultXxPortConfiguration, xaExtCreateXref returned false, Param 1: 1: CAS 2: T1-PRI 3

757130 8696 xa xancxsfc.cc Funktion xSfcReLinkVmNodeFromEdingToAss: The datas in the xaNodes are not compatible in this function. Used for NIQ/AutoAttendant. 1

757386 8697 xa xancavoice.cc function xaNcaVoiceResourceChanged: unexpected parameter resNotiy 1

757387 8698 xa xancavoice.cc function xaNcaVoiceNIQResource: could not be executed du to error. See param. 1

757519 8699 xa xamgrqueuec.cc function XaMgrQueueC::voiceResourceChanged: could not be executed du to error. See param. 1

758376 8700 xa xancavoice.cc function xaNcaVoiceMediaUpdate: could not be executed du to error. See params. 1

758590 8701 xa xancavoice.cc function xaNcaVoiceStartTone: could not be executed du to error. See params. 1

758592 8702 xa xancavoice.cc function xaNcaVoiceStopTone: could not be executed du to error. See params. 1

758769 8703 xa xa/xafeaasynchobserverc.cc XaFeaAsynchObserverC::handleSwitchGroupStateChange() hasn't been implemented by the client. Attach done for a feature but handle() not implemeted 1

758770 8704 xa xa/xafeaasynchobserverc.cc XaFeaAsynchObserverC::handleFeatureResponse() hasn't been implemented by the client. Attach done for a feature but handle() not implemeted 1

758999 8705 xa xaidn.cc function adjustForInternal. Not expected error depend on parameter. 1

761035 8706 xa xancavoice.cc function xaNcaVoiceTakeCallOutOfQueueList: could not be executed du to error. See params. 1

762374 8707 xa xamonbenni.cc Memory Logging: The osLnhSupervisionProc handles the timeout signals requested from OSE shell commands. Error: Could not send the signal via link handler. p1: - p2: - p3: - 1

763971 8708 xa xacciinfoserver.cc In function xaCciIfSetFacility: no ifPointer has been found 1

765005 8709 xa xancasetupind.cc Incoming call from a SIP trunk couldn't allocate the Switchobject for the given b- channel 1

765100 8710 xa xancanamesrv.cc Function xaNcaNameRes: Unexpected situation at the reception of the name from the name server. 1

766782 8711 xa xalibpartyidc.cc Class XaLibPartyIdAllocatorC: problems with some operations: param 1: 1 = allocate 2 = allocate 3 = free 4 = checkIfEmptyAndClear (hanging partyId) 5

767030 8712 xa xacciinfoserver.cc Problem with PartyId access-functions 1

767268 8713 xa xancagenmsg.cc Function analGenMsg: unexpected signal 1

771952 8714 xa xancaexastar.cc function put_announce: unexpected problem. See param 1 (errorNr) 1

772752 8715 xa xancxsfc.cc Function xSfcUnlink: undef linkArt 1

772763 8716 xa xancavoice.cc VC command VoiceSwitchHookFlash to request a Switch Hook Flash on the trunk line has failed. Bcsref is out of range 1

772764 8717 xa xancavoice.cc VC command VoiceSwitchHookFlashInfo to request sending digits to the trunk line has failed. Bcsref is out of range 2

772765 8718 xa xancavoice.cc VC command VoiceSwitchHookFlashDisc to request to clear the call after a previous Switch Hook Flash on the trunk line has failed. Bcsref is out of range 3

772846 8719 xa xancaexastar.cc function put_ann_answer: ncAnnBcsRef is not valid 1

773203 8720 xa xanodlinkcom.cc Function xaNodMoveExtensionLink: destNode has already an extension link 1

773238 8721 xa xaroutingsingle.cc Function xaRouCheckAndPushBackEvacInfoFailed: missing termId for terminal info 1

773245 8722 xa xancaexastar.cc function check_star_announce: unexpected problem. See param 1 (errorNr) 1

773277 8723 xa xancavoice.cc function xaNcaVoiceRecordingComplete: could not be executed du to error. See params. 1

776015 8724 xa xancxconnect.cc Function xaNcxXAddConnect: No ConnectionId is existing or could not be created. 1

776140 8725 xa xancxsfc.cc function x_sfc_jcr (Join with Call Release) used for adding a terminal in a conference: orig_node_p has the same value as otherNodeP which should never happen 1

776141 8726 xa xancxsfc.cc function xSfcDialInConferenceAddEndPoint used for adding a terminal in a Dial-In Conference: values of confMasterNodeP or newEndPointNodeP are not expected which should 1

780261 8727 xa xancaexastar.cc function xaNcaPutIntrusion: The type of number is not an internal user. 1

782367 8728 xa xatdfmain.cc Time Controlled Functions: timed reset of Mitel sip terminals set from webAdmin 1

782692 8729 xa xancxsfc.cc Start Ccbs, function x_sfc_icr: No xisting associated link for external CCBS 1

783733 8730 xa xacciinfoserver.cc If-Block is NULL in xaCciIfGiveDdi() 1

787218 8731 xa xancaexaselect.cc Negative Alarm: A Public Emergency Number has be dialled (emerg number detected) Param 1: first 8 digits of the public emergency in BCD format Param 2: userId of the caller 1

787224 8732 xa

xaallpublicemergencynumberdetector.

cc

Positive Alarm: A Public Emergency Number has be dialled (emerg number detected). The positive alarm is raised at the end of the call or when the call has failed. Param 1: first

8 digits of the public emergency in BCD format Param 2: userId of the caller Param 3: terminalId of the caller 1

789326 8733 xa xaalldbutilc.cc Signal provided to XaAllDbUtilC::deleteOrMergeUserTaxBlock is not properly initialized 1

791238 8734 xa xancavoice.cc Function xaNcaVoiceTransferCall: Unexpected XA state. 1

791614 8735 xa xaallprotocolasynchobserverc.cc XaAllProtocolAsynchObserverC::handleProtocolChange() hasn't been implemented by the client. Attach done for a feature but handle() not implemeted 1

792817 8736 xa xaasnfacilityie.cc The given ASN.1 facility is not allowed to be sent over this Protocol 1

793366 8737 xa xacciinfoserver.cc unknown/unhandled number modifying action. param1: orig-BcsRef param2: called-BcsRef param3: modify number action 1

628227 10001 tp tpcpe*.c Default error for CPE 1

628228 10002 tp tpcpeikccont.c Unknown stimuli 1

628229 10003 tp tpcpe*.c Wrong timer type 1

628230 10004 tp tpcpe*.c Wrong location 1

628231 10005 tp tpcpe*.c An error is occured in DSP read 1

628232 10006 tp tpcpe*.c An error is occured in DSP write 1

628233 10007 tp tpcpe*.c Wrong TTgPe signal 1

628234 10008 tp tpcpe*.c Unknown feature 1

628235 10009 tp tpcpe*.c Wrong terminal type 1

628236 10010 tp tpcpe*.c Wrong term state 1

628362 10011 tp manlib.c Error has been detected in the component manlib 1

628553 10012 tp cpc*.c Default error identity for the component (tp)cpc 1

628554 10013 tp cpc*.c Exclude list problem 1

628555 10014 tp cpc*.c Message decomposition error 1

628556 10015 tp cpc*.c Error in message, this message will be ignored 1

628557 10016 tp cpc*.c Error in a mandatory info-element 1

628558 10017 tp cpc*.c Timeout problem 1

628559 10018 tp cpc*.c Message unexpected 1

628560 10019 tp cpc*.c Unknown state 1

628561 10020 tp cpc*.c Unknown message 1

628562 10021 tp cpc*.c The data storage process returns an Unsuccess 1

628563 10022 tp cpc*.c Nsf unknown 1

628564 10023 tp cpc*.c Wrong feature: this feature is not acceptable in this state 1

628565 10024 tp cpc*.c The ksc (key state controler) is in a wrong state 1

628566 10025 tp cpc*.c The csc (call state controler) in error state 1

628567 10026 tp tpctlsv.* The tpctlsv module couldn't start the CTLSIGVIEWER agent because of an error in ssnDefineAgent. 1

628569 10027 tp tpnsvcont.cc 1

628570 10028 tp tpnsvcont.cc used for connection errors 1

628571 10029 tp tpnsvcont.cc used for signal errors 1

628572 10030 tp tpnsvcont.cc Server/Search List handling error 1

628580 10037 tp tpmmplib.cc there is no location area with this id 1

628598 10040 tp ctlcont.c ctl process received no signal 1

628599 10041 tp ctlcont.c ctl process received a message it didn't recognise (invalid minor) 1

628600 10042 tp ctlcont.c ctl process received a message it didn't recognise (invalid major) 1

628601 10043 tp ctlhal3.c ctl process received a message over i-channel with an invalid protocol type 1

628602 10044 tp ctlhal3.c ctl received an internal message with an invalid destination 1

628603 10045 tp ctlhal3.c ctl received a message with an invalid length 1

628604 10046 tp ctlhal3.c ctl received message with an invalid tei or msn 1

628606 10047 tp ctlhasig.c ctl received a message from an impossible source (i.e. one that shouldn't send this type of message. 1

628607 10048 tp ctlhasig.c ctl received L3 Error from an office terminal 1

628608 10049 tp ctlhasig.c ctl received an unexpected timeout message 1

628609 10050 tp ctlhasig.c ctl: terminal state or type is wrong 1

628610 10051 tp ctlhasig.c ctl received message with an invalid address for an add-on module 1

628611 10052 tp ctlhasig.c ctl received a "My Equipment Id Is" message with an unknown equipment id 1

628612 10053 tp ctlhasig.c ctl received an unrecognised stimulus (from AD2) 1

628613 10054 tp ctlhasig.c ctl received a message for a terminal in the wrong state 1

628614 10055 tp ctlstart.c ctl received a message for an unknown port 1

628615 10056 tp ctlstart.c Problem with terminal database 1

628616 10057 tp ctlstart.c the start of a terminal failed 1

628617 10058 tp ctlstart.c unrecognised terminal types 1

628618 10059 tp ctlstart.c stop of terminal failed 1

628640 10060 tp tpctlsv.c The signalcopier could not copy the message, because there was no copy order for the signal or no memory avialable for the copy. 1

628641 10061 tp tpctlsv.c The xerox signal handler of the agent received a signal with a wrong minor. 1

628643 10062 tp tpctlsv.c There was a missfunction in the ring buffer controling the output to the pocket adapter. The ring buffer is maybe full or a put back was called in an ivalid state of the ring buffer 1

628686 10063 tp tpcpetdoffice.c There was an error in the ring handling of rc or td. This error is raised up on wrong data passed from the caller. 1

628782 10064 tp cpctsup.c 1

628841 10065 tp ctldevice.c The device is in an unexpected state 1







628848 10072 tp ctlhasig.c Expected a Pocket Adapter terminal type 1

628849 10073 tp ctlhasig.c Unexpected Datalinks signal 1

628935 10076 tp ctlagents.c Tried to connect a socket id that is already connected 1

628936 10077 tp ctlagents.c Tried to disconnect a socket that is not connected 1

628953 10078 tp ctldevice.c Too much data for this stimulus 1

629133 10079 tp ctldevice.c Impossible switch setting 1

629134 10080 tp ctlagents.c Invalid linkId value 1


629136 10082 tp ctldevice.c Invalid combination of switch settings on the Pocket Adapter 1


629145 10084 tp ctldevice.c The V24 line is not flow controlled. You must modifythe PA switches to flow control the line otherwise its likely that data will be lost 1

629206 10086 tp tpcpedcobjects.c Wrong write index in ObjectArray. 1

629207 10087 tp tpcpedcobjects.c Wrong read index in ObjectArray. 1

629208 10088 tp tpanacallend.c this state isn't in case. 1

629271 10092 tp tpbridges.c An Interface function routes an unknown signal 1

629272 10093 tp ctldevice.cc Invalid value of device table index 1

629286 10094 tp ctlhal3.cc ExchangeInfo received with different destinations. Cannot be handled for perf. reasons. 1

629303 10095 tp tpmmplib.cc Call of tpmmpDetach That means an HS doesn't answer to a page message Parameters: termId and locStatus 1

629307 10096 tp atpc1.c atpc1 error 1

629309 10097 tp ctldevice.cc Unsuccessfull DevRegisterResp 1

629310 10098 tp ctldevice.cc devP == NULL 1

629313 10099 tp ctlstart.c User tried to plug in a "cheap" terminal type 1

629334 10100 tp bckup bckup error 1

629401 10101 tp ctlstart.c Ctl received a TgCpStatus messages with a channel state it can't handle. 1

629432 10102 tp ctlhal3.cc A DECT systembase is missing at the startup 1

629573 10103 tp tpanacallend.c This tc_state isn't in case. 1

629591 10104 tp tpcpelanguagec.cc Language not found 1

629608 10105 tp tpcpe* 1

629666 10106 tp ctlhal3.cc report the activity of the defined SB 1

629803 10107 tp tpanadial.c In this tp-state you can't receive flash or impulse-digit. 1

630018 10109 tp tpalllassacc.cc default error for line objects handling. 1

630029 10110 tp tpallsubsfs.cc This error is generated, if the feature state (for a specific subscriber) is not found 1

630041 10111 tp ctlhal3.cc Invalid DpTimeoutEnu. 1

630049 10112 tp tpmasynchbridge.cc Error Mapping TpTbxMenuEnuC to MaTbxMenuEnuC - undefined value 1

630087 10113 tp tpctlhasig.cc TTgMmIdleReq received for non-existing CPE instance. 1

630088 10114 tp tpctlhasig.cc TTgMmSig received in wrong component (received in SysCompCtl) 1

630089 10115 tp tpctlhasig.cc Ignore mmp signal for non-existing terminal 1

630096 10116 tp tpctiatpc3.cc Something is wrong in the CTI server Atpc3. 2

630097 10117 tp tpcpectievent.cc The event handler in the cti cpe has a problem 1

630099 10118 tp tpcpecticmd.cc command handler of cti cpe 1

630110 10119 tp tpbridges.cc Can't send message to DPS, as the process doesn't exist. 1

630111 10120 tp tpbridges.cc Can't send message to MMP as the process does not exist. 1

630114 10121 tp ctlhal3.cc for BOARD_STAR the maximum of groups is limited to 18 1

630166 10122 tp tpallsubsportconvc.cc there's a problem with subs-port conversion tabel le 1

630194 10123 tp tpcpetdcordless.cc Vibramode not found 1

630203 10124 tp ctlhasig.c we shouldn't have this hw version here 1

630436 10125 tp tpalldblib.cc Wrong TermId. 1

630437 10126 tp tpalldblib.cc Terminal type is wrong or unknown 1

630438 10127 tp tpalldblibc.cc The subscriberId is wrong 1

630439 10128 tp tpalldblib.cc List type error (Note or Redial or CallList or AnsweredList, or CARD 1

630440 10129 tp tpalldblib.cc Key error (wrong location or position 1

630448 10130 tp tpallsubsfs.cc No object found in DB with the specific subsId Parameter1 = User Nummber Hex 2

630509 10131 tp tpctiatpc3.cc The CTI link is broken unexpectedly 1

630604 10132 tp tpalldblib.cc scaimsofficecard.cc Error All cards or All CallInformation are gone on the system 1

630752 10133 tp tpcpedccont.cc Invalid display in display list 1

630753 10134 tp tpcpedccont.cc Display not found in display list 1

630754 10135 tp tpcpetscfeature.cc Config terminal state -> attempt to move cursor to line that does not exist 1

630799 10136 tp tpcpedccont.cc Display list contains a null pointer where a valid display was expected. 1

630920 10137 tp tpctiatas.cc A command is not understood in ATAS. 1

630921 10138 tp tpdesagent.cc A command is not understood by ATNS (agent). 1

631036 10139 tp tpcpesymcont.cc NULL iterator encountered when erasing state related symbols. 1

631115 10140 tp tpcpedcobjects.cc Invalid or null display group or element in display object list. 1

631116 10141 tp tpcpccallrefpool.cc Attempt to deallocate a call reference which is not in the CPC pool 1

631117 10142 tp tpcpccallrefpool.cc Port incorrectly configured 1

631118 10143 tp tpana.c Soho: This errorid is for the all file the same. The last paramter is the numbering. 1

631150 10144 tp tpctlmsghdl.cc Unhandled internal response. 1

631170 10145 tp tpallsubsacc.cc Subscriber has been deleted, the teamkey prs ess won't be executed 1

631176 10146 tp tpalpdial.cc Tried to access an entry in an empty alpha dial result. 1

631177 10147 tp tpalpdiallpi.cc Unexpected result from an async. alpha search. 1

631202 10148 tp tpctiatpc3.cc Nullpointer received from DL. 1

631220 10149 tp tpbkgproc.cc A signal received in TpBkgProcC could no be handled. 1

631221 10150 tp tpcpedcfeaturedisp.cc The data pointer was null when a valid one was expected 1

631289 10151 tp tpbkgproc.cc Unknown message command received in tpBkgProc 1

631301 10152 tp tpctiatpc.cc The Alarm Queue is full, or we've received an alarm with the same id already 1

632803 10153 tp tpcpetdcordless.cc dect link breakdown Parameters: User-Nr, release-reason, State User-Nr is in Hex. Release reasons: 43 Bearer corrupt (mostly "bad air" weak or disturbed signal) 51 DL04 3

643676 10154 tp tpcpccallrefpool.cc Trying to allocate a call ref for an invalid or undef port 1

643677 10155 tp tpcpccallrefpool.cc There is no call ref pool for this port 1

645224 10156 tp tpcpetdcorded.cc Too many DTMF digits received. The digits which are over the limit are truncated. 1

657368 10157 tp tpcpetscalpha.cc During the capitilisation of the search pattern, the length of the pattern has exceeded the length of the found name. This is probably due to asnchronous searches being delayed. 1

660744 10158 tp tpcpedcwinview.cc myEndEntry is outside the size of the myEntries container. The First parameter shows myEndEntry, the second myEndEntries.size(). Ref BR 28578. 1

665036 10159 tp tpctiatas.cc Alarm: ATAS link has failed because ATAS hearbeat stops. 2

665037 10160 tp tpctiatpc3.cc Alarm: CTI link has failed because APTC3 hearbeat stops. 1

665107 10161 tp tpctiatpc.cc ctiApplInit: PeerTermId not unique or not defined. 1

665108 10162 tp tpdescont.cc tpDesDirProc: a case when a signal received is not treated. 1

665111 10163 tp tpdesasync.cc ATNS: A case is not treated, ignored or maybe not implemented. 1

665297 10164 tp tpctlstart.cc default error id for tpctlstart.cc 1

665298 10165 tp tpctlmultiterm.cc addTerm -> No physical terminal present (CTI) 1

665849 10166 tp tpctiatpc3.cc Alarm: CTI link reestablished - 1st party CTI link reestablished. 1

665851 10167 tp tpctiatpc3.cc Alarm: CTI link has failed because APTC3 hearbeat stops. 3rd party CTI link has failed. 1

665853 10168 tp tpctiatpc3.cc Alarm: CTI link reestablished. 3rd party CTI link reestablished. 1

665854 10169 tp tpctiatas.cc Alarm: ATAS link reestablished. 1

668053 10170 tp tpallsubs.cc TwinComfort remove, get the pc-chain to know who delete it. 1

670570 10171 tp tpanacom.cc DTMF transmitter request failed. Parameter 1 with value 0 or 2: signal timeout, with value 1 or 3: no transmitters available. Parameter 2 and 3: always 0. 2

689608 10172 tp tploglogger.cc Only CTL process is allowed to initialise the logging system. 2

689610 10173 tp tplogappender.hh Only CTL process is allowed to create the logging appenders 2

689621 10174 tp tploglogger.cc Saving syslog data into database failed. 1

689627 10175 tp tploglogger.cc

Forwarded logging event from Tp-Logging system. See parameters for details. on real target only: Param1: Param2: Log Level TpAam = 0, Log Level TpAamPrg,

1= D3Ad2, 2= TpCpe, 3= TpTap, 4= TpCtl, 5=Error Tp5xi, TpSip, Tm5xi, TpMcx, 5=Error DpNwk, DpDlc, UsPres,

TpCpc, 6

693319 10176 tp tptapdisplayadapterl1ad2c.cc Unknown symbol. Parm1: id of the unknown symbol (TmAam::SymbolIdC) 1

693320 10177 tp tptapdisplayadapterl1ad2c.cc Unknown symbol state. Param1: id of the unknwon state (TmAam::SymbolC::StateC) 2

693321 10178 tp tptapdisplayadapterl1ad2c.cc Unknown icon. Param1: id of the unknown icon (TmAam::SymbolIdC) 1

694056 10179 tp tpctlterminalcontroller.cc

A signal was received for a terminal, but the terminal instance (cpeP) was null. This indicates that the terminal has either already been deleted - e.g. TermStopReq was received

twice, or that there was some error on startup. Parameter 1 is the minor of the signal that caused the problem. Parameter 2 is the term Id. 2

704170 10180 tp tpana.cc

We missed the response signal of RM resource reservation. It seems that the timeout of osOseReceiveSigTmo function is too short. The reservation of this RM resource is freed

again if the reservation was successful. Param 1: RmResourceTypeEnu; Param 2: 0 = reservation successful, 1 = no reservation; Param 3: 0. 3

705861 10181 tp tpana.cc Unknown signal major in TpAnaProcC::handleSig(). Param 1: Signal major/minor. Param 2 & 3: First 8 bytes of the signal content. 1

705863 10182 tp tpana.cc Common error code in this file. The error locations are numbered in parameter 1. 2

707321 10183 tp call list Unanswered, Redial and Answered are possible... Undef is not possible, there is a problem. 1

711358 10184 tp tpalldblib.cc User Routing doesn't exist, impossible to activate it!!! 1

718202 10185 tp tpctiatpc3.cc Subscriber commands are received by the server where no "cs 3ok" or "cs 3nok" command is received in advance. 1

725363 10186 tp tpcpcstacf.cc Start-up of terminal failed, because of wrong or missing response from xa 1

728841 10187 tp tpalldblib.cc Login of a freeseater, problem during the creation of the association!!! 1

736350 10188 tp tpctlterminalcontroller.cc TerminalStartIndication received from Ia for a terminal type which must no be instantiated in tp. 1

738777 10189 tp tpanadiscind.cc Analogue trunk: That's the wrong Minor for this tc_state (peer_release). Paramter 1: Analogue port index number. Paramter 2: Wrong Minor index. 1

739161 10190 tp tpanacall.cc Common error code in this file. The error locations are numbered in parameter 1. 1

739162 10191 tp tpanadiscind.cc Common error code in this file. The error locations are numbered in parameter 1. 1

739163 10192 tp tpanasetupind.cc Common error code in this file. The error locations are numbered in parameter 1. 1

739262 10193 tp tpanadiscconf.cc Error in select_treating. Parameter 3: analogue port number. 1

739516 10194 tp tploglogger.cc Forwarded logging event from Tp-Logging system, component= D3Ad2. 1

739517 10195 tp tploglogger.cc Forwarded logging event from Tp-Logging system, component= TpCpe 1

739518 10196 tp tploglogger.cc Forwarded logging event from Tp-Logging system, component= TpTap 1

739519 10197 tp tploglogger.cc Forwarded logging event from Tp-Logging system, component= TpCtl 1

739520 10198 tp tploglogger.cc Forwarded logging event from Tp-Logging system, component= Tp5xi 1

739521 10199 tp tploglogger.cc Forwarded logging event from Tp-Logging system, component= TpSip 1

739522 10200 tp tploglogger.cc Forwarded logging event from Tp-Logging system, component= Tm5xi 1

739524 10201 tp tploglogger.cc Forwarded logging event from Tp-Logging system, component= TpMcx 1

739525 10202 tp tploglogger.cc Forwarded logging event from Tp-Logging system, component= DpNwk 1

739526 10203 tp tploglogger.cc Forwarded logging event from Tp-Logging system, component= DpDlc 1

739527 10204 tp tploglogger.cc Forwarded logging event from Tp-Logging system, component= UsPres 1

739528 10205 tp tploglogger.cc Forwarded logging event from Tp-Logging system, component= TpCpc 1

739529 10206 tp tploglogger.cc Forwarded logging event from Tp-Logging system, component= TpCti 1

739634 10207 tp tpanacom.cc Common error in this module. Parameter 1: 0, Parameter 2: error location, Parameter 3: analogue port number. 1

739636 10208 tp tpanadial.cc Common error in this module. Parameter 1: 0, Parameter 2: error location, Parameter 3: analogue port number. 1

739638 10209 tp tpanafacconf.cc Common error in this module. Parameter 1: 0, Parameter 2: error location, Parameter 3: analogue port number. 1

739640 10210 tp tpanafacind.cc Common error in this module. Parameter 1: 0, Parameter 2: error location, Parameter 3: analogue port number. 1

739641 10211 tp tpanainfoind.cc Common error in this module. Parameter 1: 0, Parameter 2: error location, Parameter 3: analogue port number. 1

739642 10212 tp tpanaregconf.cc Common error in this module. Parameter 1: 0, Parameter 2: error location, Parameter 3: analogue port number. 1

739643 10213 tp tpanasetupconf.cc Common error in this module. Parameter 1: 0, Parameter 2: error location, Parameter 3: analogue port number. 1

741941 10214 tp tploglogger.cc Forwarded logging event from Tp-Logging system, component= TpHotel 1

745646 10215 tp tpanacom.cc The port reference to analogue port conversion failed. Parameter 1: Port reference (0xffff is Undef) Parameter 2: Absolute port (0xffff is Undef) Parameter 3: Error location: 0 or 1

745844 10216 tp tploglogger.cc Forwarded logging event from Tp-Logging system, component= Tp67a. 1

745938 10217 tp tpanaalertind.cc Error in TpAna state alert indication. Parameter 1: Analog port number, Parameter 2: 0, Parameter 3: Error location. 2

745947 10218 tp tpanacallpind.cc Error in TpAna state call proceeding indication. Parameter 1: Analog port number, Parameter 2: 0, Parameter 3: Error location. 2

745949 10219 tp tpanaconnind.cc Error in TpAna state connect indication. Parameter 1: Analog port number, Parameter 2: 0, Parameter 3: Error location. 1

745950 10220 tp tpanasetackind.cc Error in TpAna state setup acknowledge indication. Parameter 1: Analog port number, Parameter 2: 0, Parameter 3: 0. 1

746884 10221 tp tploglogger.cc Forwarded logging event from Tp-Logging system, component= TpHotel 1

748125 10222 tp tpcpecstasessionhandlerc.cc Not enough CSTA licence! 1

748126 10223 tp tpcpecstasessionhandlerc.cc Again enough CSTA licence! 1

754686 10224 tp tploglogger.cc Forwarded logging event from Tp-Logging system, component= TpAll 1

755646 10225 tp tmaamdisplay.cc Invalid dirty detected. See br48691. A dirty display was prepared for marshalling, but the display is not really dirty. Therefore, the marshalling will be skipped. 1

759917 10226 tp tpallsubsfs.cc Maximum value for CcbsBPartyId has been reached for the subsId in parameter 1. See br52075. 1

760265 10227 tp tpctlproc.cc Could not find a TpSubsIdC instance related to the given TpTermIdC instance. Parameters: 1: Empty (Should normally be the user number) 2: SessionId 3: Empty 2

765388 10228 tp npdescont.cc npDesDirProc: a case when a signal received is not treated. 1

768330 10229 tp Tp Sdt Subsystem Forwarded logging event from Tp-Logging system, component= TpSdt. 1

769816 10230 tp tpanacom.cc

Localisation failure! ==> The country dependent value can't be set! Parameter 3: =0: Localisation file can't be opened. Localisation file is missing in the file system. =1: Attribute

"ItalyFeatureSpecialAlarmForAutoCallBack" can't be converted from char to bool. =2: Attribute "ItalyFeatureSpecialAlarmForAutoCallBack" can't be found in the localisation file.

=3: Attribute "AustraliaFeatureAbwo" can't be converted from char to bool. =4: Attribute "AustraliaFeatureAbwo" can't be found in the localisation file. =5: Attribute

"NormalRingMaxMs" can't be found in the localisation file. =6: Attribute "NormalRingMinMs" can't be found in the localisation file. =7: Attribute "NormalRingPhases" can't be

converted from char to UInt8. =8: Attribute "NomralRingPhases" can't be found in the localisation file. =9: Attribute "NormalRingPermutation" can't be converted from char to

UInt8. =10:Attribute "NomralRingPermutation" can't be found in the localisation file. =5-10: Initialisation of ring detection table "NormalRuf" isn't done. =11: Initialisation of ring

detection table "NormalRuf" isn't done correctly. =12:Attribute "InternalTrunkRingMaxMs" can't be found in the localisation file. =13:Attribute "InternalTrunkRingMinMs" can't be

found in the localisation file. =14:Attribute "InternalTrunkRingPhases" can't be converted from char to UInt8. =15:Attribute "InternalTrunkRingPhases" can't be found in the 4

770259 10231 tp tpctlproc.cc An unhandled value of IaSipAastraAddOnTypeC was passed to map5xiAddon. This can result in the add on not working correctly. Parameter 1 is the addOn type cast to UInt32. 1

770524 10232 tp tpanacall.cc

Localisation failure! ==> The country dependent value can't be set! Ringing detection table (incoming call) of the analogue trunk can't be initialized correctly. Parameter 1: Read

number of phases of the maximal time pattern. Parameter 2: Read number of phases of the minimal time pattern. Parameter 3: Read number of active phases. If this ErrorId

arises a further ErrorId is generated. This generated ErrorId shows the call type which can't be initialized correctly. 1

778729 10233 tp tpcpebasec.cc handleCommunicationLostReq(termId) was called in the Cpe Base class, where it is not handled. 1. Is an implementation for this method missing in one of the derived classes? 2

780171 10234 tp tpallcalllist.cc

br57658: This entry in the call list does not belong to this user or is of the wrong type. Note that the code may attempt to fix the problem by truncating the list at the last valid

entry. Parameter 1: The subtype that we were looking for (not the subtype of the problematic list entry) Parameter 2: The CallInfoId of the problematic list entry. 1

780587 10235 tp tpallcalliinserts.cc This is a crash attempting to link a call list entry for a user where the next entry does not belong to the same user. 1: Next calls subsId 2: Current calls subsId 3: 1 = Subtypes 5

780588 10236 tp tpcalliinserts.cc This is a crash attempting to link a call list entry for a user where the next entry does not have the same subtype. 1: Next calls subsId 2: Current calls subsId 3: Top 16 bits: Next 3

781071 10237 tp tpcpedcwindow.cc The current entry is BuffIndexUndef. Operations should not be called when the current selected entry is undefined. 1

781072 10238 tp tpcpedcwindow.cc Problem with the entries in the buffer of the window. 1

781498 10239 tp tpalldblib.cc (checkIfTerminal...) The association does not contain a terminal profile id which exist for the user => inconsistent database 1

791122 10240 tp tploglogger.cc Forwarded logging event from Tp-Logging system, component= TpCpq 1

792101 10241 tp tploglogger.cc This warning appears when the tp logger is used before it is initialized completely. 1

628063 12001 l3 l3ta.c Process received a message with a Major Number not previewed for this service. 1

628064 12002 l3 l3ta.c Received not allowed message in Idle State. 1

628069 12003 l3 l3ta.c not previewed case in sending out a message 1

628199 12004 l3 l3mux.c Invalid portref or bcsRef given 1

628200 12005 l3 l3mux.c Unexpected signal Major in l3MuxProc_ 1

628201 12006 l3 l3mux.c Unexpected signal Minor in l3MuxProc_ 1

628202 12007 l3 l3mux.c Invalid Bcs Ref for updating key word 1

628203 12008 l3 l3mux.c Unknown flag parameter for updating key word 1

628204 12009 l3 l3mux.c Invalid Bcs Ref for reading key word 1

628205 12010 l3 l3mux.c Unknown flag parameter for reading key word 1

628206 12011 l3 l3mux.c No pointer to signal for l3_fill_in_head 1

628207 12012 l3 l3mux.c Invalid bcsref and/or portref for l3_fill_in_head 1

628208 12013 l3 l3mux.c Attempt to modify a non 1Tr6 message 1

628209 12014 l3 Unexpected signal Minor in 1

628210 12015 l3 l3mux.c Unexpected signal Minor in l3MuxProc_ down stream 1

628211 12016 l3 Unknown bcsRef to deallocate 1

628242 12017 l3 ?.c S3 comment: 1

628243 12018 l3 ?.c S3 comment: 1

628244 12019 l3 ?.c S3 comment: 1

628245 12020 l3 ?.c S3 comment: 1

628246 12021 l3 ?.c S3 comment: 1

628247 12022 l3 ?.c S3 comment: 1

628248 12023 l3 ?.c S3 comment: 1

628249 12024 l3 dpnwkccsdl.cc CC receives a CipherCfm in wrong state 2

628250 12025 l3 ?.c S3 comment: 1

628251 12026 l3 ?.c S3 comment: 1

628252 12027 l3 ?.c S3 comment: 1

628253 12028 l3 ?.c S3 comment: 1

628254 12029 l3 ?.c S3 comment: 1

628255 12030 l3 ?.c S3 comment: 1

628256 12031 l3 ?.c S3 comment: 1

628257 12032 l3 ?.c S3 comment: 1

628258 12033 l3 ?.c S3 comment: 1

628259 12034 l3 ?.c S3 comment: 1

628260 12035 l3 ?.c S3 comment: 1

628261 12036 l3 ?.c S3 comment: 1

628284 12037 l3 l3mcd*.c Default l3mcd error (multiple use) 1

628285 12038 l3 l3mcd*.c Mandatory info-element is missing 1

628286 12039 l3 l3mcd*.c Invalid call reference 1

628287 12040 l3 l3mcd*.c Unrecognized info-element 1

628288 12041 l3 l3mcd*.c Mandatory or optional info-element content error 1

628306 12042 l3 l3mcd*.c Content error in a info-element (that isn't really a ie content error but a ie content not handled) 1

628308 12043 l3 l3common.c L3 expired without correct timeout server handling 1

628309 12044 l3 l3cccom.c During starting a new L3 timer an old pending timeout was detected 1

628310 12045 l3 l3cccom.c During starting a new L3 cc_2_timer an old pending timeout was detected 1

628335 12046 l3 mail_io.c scioh refused login request to mail_io process 1

628336 12047 l3 mail_io.c received a ServiceLogout instead of a ServiceDataAck from scioh 1

628337 12048 l3 comvoicemail.c scioh refused login request 1

628338 12049 l3 scomvoicemail.c received a ServiceLogout instead of a ServiceDataAck from scioh 1

628340 12050 l3 l3mcdde*.c Unexpected info-element in a message 1

628358 12051 l3 mcddl3m.c Error has been detected in the decomposition of a L3 message 1

628484 12052 l3 l3anaam2proces.cc This major isn't handled in this switch. Parameter 1: Major. Parameter 2: Minor. 2

628485 12053 l3 l3anaam2proces.cc Invalid message 2

628486 12055 l3 l3cacproces.cc Invalid/Unexpected signal 2

628501 12056 l3 l3anaam2proces.cc Invalid Release Detection value 2

628539 12057 l3 l3sbc*.c System base power check no ok last byte of param 1 is LA id + SB id. Top 2 bits LA, lower 6 bits SB id e.g. 0000008A -> 8A -> 10001010 -> 10 001010 -> LA 2 and SB 10 3

628540 12058 l3 d3ad2sbc.cc System base synchronisation (B channels) not ok 2

628541 12059 l3 l3sbc*.c System base in invalide state 1

628542 12060 l3 d3ad2sbc*.c

System base status information after a system base reset. If the System Base resets, the PBX asks for System Base Status and generates an error log entry 12060. Parameters:

1st param portid , Prog_Status, systemStatus, resetCause 2nd param os_exc_old, os_exc_new , dest_id , event_id 3nd param parameterH, parameterL , Stim/Ev-

code, state Details see swdoc-0207 and swdoc-321. resetCause: 0=Power-up or Watchdog, 1=OS^-exception, 2,3=Synch error/lost, 4=L1Reset, 5=L2Reset, 8=Reset

from IIC. os_exc_old, os_exc_new: 00=No exception. Values for os_exc_new: LAYER2_STIM_ERROR = 0x40, LAYER2_CODE_ERROR = 0x41,

LAYER2_MEM_ERROR = 0x42, LAYER2_LENGTH_ERROR = 0x43, LAYER3_PARAM_ERROR = 0x44, LAYER3_DEST_ERROR =

0x45, LAYER3_TRANSMIT_ERROR = 0x46, FREQUENCY_OUT_OF_RANGE = 0x47, SYSCON_ERROR = 0x48, //for MULTIFRAME_SYNCH

INVALID_B_CHANNEL = 0x49, NO_HW_PARAMETERS = 0x51, SILENT_RESET_DONE = 0x52, SPEECHBUFFER_INVALID =

0x53, DIP_OVERLOAD = 0x54, SYNCHPATTERN_ERROR = 0x55, MULTIFRAME_SYNCH_ERROR = 0x56, LAYER2_FRAMELOST

= 0x57, ///////////////////////////////////////////////////////////////////////// // SEOS EXCEPTIONS /////////////////////////////////////////////////////////////////////////

SEOS_FAST_QUEUE_OVERFLOW = 0x80, SEOS_SLOW_QUEUE_OVERFLOW = 0x81, SEOS_ILLEGAL_STATE_ASSUMED = 0x82,

SEOS_ILLEGAL_STATE_RETURNED = 0x83, SEOS_ILLEGAL_PROCESS_H = 0x84, SEOS_ILLEGAL_TYPE_CREATION = 0x85, SEOS_ILLEGAL_PROCESS_INIT

= 0x86, SEOS_TIMERS_OVERFLOW = 0x88, SEOS_DEST_PROCESS_DORMANT = 0x8a, SEOS_DOUBLE_MEMORY_RETURN = 0x8b,

SEOS_MESSAGE_POOL_EMPTY = 0x8c, SEOS_REQUESTED_SIZE_TOO_LARGE = 0x8d, SEOS_DEFERRED_QUEUE_OVERFLOW = 0x8e, 6

628543 12061 l3 l3sbc*.c Unexpected timeout type for system base 1

628545 12062 l3 l3sbc.c Error when performing software download to system base 1

628548 12063 l3 treatSignal unkown majormod. 1

628628 12064 l3 l3errhdl.c to catch the gsHall error in the errorhandler 1

628630 12065 l3 l3mail_io.c Alarm: Mail System: V24 Faulty 1

628631 12066 l3 l3mail_io.c Alarm: Mail Server Faulty 1

628668 12067 l3 l3errhdl.c an infoelement fount with a to long infoelement length (longer than the message) 1

628735 12068 l3 l3mt2actconf.c Alarm: ACT System base error 1

628743 12069 l3 l3cc31state.c ReleaseReq received in state 31, but not as UserCC 1

628744 12070 l3 l3cc31state.c Non treated Msg received in L3-state 31 1

628769 12071 l3 l3cc01state This is the system alarm errorid for the no response from trunk alarm message 1

628816 12072 l3 l3cctrans Outgoing call rejected alarm. 1

628929 12073 l3 l3cctrans.c Alarm: No response from network 1

628931 12074 l3 l3anacallinit.c Alarm: No response from network (analog trunks) 1

628954 12075 l3 l3mt2common.c PSA switched on or off -> see parameter 1 (80=on 82=off) 1

629048 12076 l3 l3mail_io.c unexpected interface type 1

629197 12078 l3 l3mux.c downstream msg: invalid portref 1

629205 12079 l3 l3anainccaproc.c This minor isn't in case. 1

629225 12080 l3 l3mux.c bcsRefAppend: invalid portref or bcsref 1

629244 12081 l3 l3ta.c not supported userRate for V.110 connection received 1

629245 12082 l3 l3mux.c l3MuxTransMsg: invalid protocol discriminator 1

629246 12083 l3 l3mux.c DlReleaseReq: invalid portref 1

629247 12084 l3 l3mux.c DlEstablishReq: invalid portref 1

629248 12085 l3 l3mt2send.c mt2TransMToL3Mux: invalid portref 1

629252 12086 l3 l3ta.c attempt to establish V.110 connection with a not supported baudrate 1

629254 12087 l3 l3mt2send.c trans_m_to_l3_mt2 : invalid portref 1

629255 12088 l3 l3mux.c bcsRefAppend: could not allocate bcsRef bloc 1

629257 12090 l3 l3cc00state.c CC state 0: unhandled message 1

629258 12091 l3 l3mt210state.c ReleaseInd: enpoint don't match. 1

629263 12092 l3 l3ccsend.c trans_sig_to_cc_mux: invalid bcsRef 1

629283 12093 l3 l3cc03state.c ModInfoReq received in state 3 (call proceeding) for UserCC 1

629284 12094 l3 l3cc19state.c L3CC: unexpected signal received in state 19 1

629299 12095 l3 l3cc.c invalid BcsRef 1

629300 12096 l3 l3cc.c no transaction found 1

629342 12097 l3 l3mt2actconf.c hanging connection on ACT radio-unit and the wisher on the RU has hit. reset the RU 1

629353 12098 l3 flcsdl.c Warning generated in order to find LC03 timer problem on S3 code 1

629384 12099 l3 l3cc00state.cc Undefined CallControl in state 0 1




629388 12103 l3 l3cc00state.cc Undefined CollControl in state 4 1

629389 12104 l3 l3cc06state.cc undefined CallControl in state 6 1












629402 12117 l3 l3cc01state.cc Wrong message for Modino-Timeout in state 1 1
















629418 12133 l3 l3cccom.cc Undefined CallControl used 1

629421 12134 l3 l3ccsend.cc Message to send is too long 1

629422 12135 l3 l3cc19state.cc Message transmitted to TE that should never been sended 1

629423 12137 l3 l3ccrest2state.cc Wrong message for Modino-Timeout 1

629424 12138 l3 l3ccrest2state.cc Undefined CallControl in state rest 2 restart 1

629425 12139 l3 l3cctr1state.cc Wrong message for Modino-Timeout 1

629426 12140 l3 l3mux.cc Undefined port to return the TEI value 1

629427 12141 l3 l3mux.cc BcsRef not found 1

629428 12142 l3 l3mux.cc unvalid port referenc 1

629429 12143 l3 l3mux.cc message for layer 3 is out of range 1

629430 12144 l3 l3mux.cc Undefined protocol used 1

629431 12145 l3 d3ad2sbc.cc

A dect systembase was removed from the LPI (cable pulled) or the system base died Parameter 1: slotId Parameter 2: getRelativePortNr(dev.getPortId()) Parameter 3:

DpDectSystemBaseAlarmInfoC 0=StartUpInProgress, 1=NotRegistered, 2=DifferentNodes, 3=PortNotAllowed, 4=LocalPower, 5=Disconnected, 6=PortReset,

7=StartUpFailure, 3

629434 12146 l3 l3cc00state.cc No free CallControl for starting a Setup 2

629435 12147 l3 l3cc07state.cc No free CallControl for staring a indiv. Cc in state 7 1




629439 12151 l3 l3cctrans.cc No free CallControl for staring an indiv. Cc 1

629440 12152 l3 l3mux.cc No valid bcs reference available 1

629441 12153 l3 l3mux.cc Unknown protocol discriminator 1

629442 12154 l3 l3mux.cc layer 3 info is smaller than 2 bytes 1

629443 12156 l3 l3cc00state.cc Signal without a message in state 0 1

629444 12157 l3 l3cc00state.cc Wrong CallControl in state 0 1


629446 12159 l3 l3cc01state.cc Non treated message in state 1 1




























629476 12187 l3 l3cccom.cc Undefined CallControl 1

629477 12188 l3 l3ccrest2state.cc Non treated message in state rest2 1

629478 12189 l3 l3cctr1state.cc Non treated message in state tr1 1

629479 12190 l3 l3cctrans.cc Undefined CallControl used 1

629480 12191 l3 l3cccom.cc L3CcTimer already expired 1

629481 12192 l3 l3cc.cc StateIndex out of state-table range 1

629482 12193 l3 l3cc.cc SignalIndex out of state-table range 1

629483 12194 l3 l3cc.cc Function not in state-table 1

629484 12195 l3 l3cc.cc Signal is neither MajorMod nor MajorL3 1

629485 12196 l3 l3cc.cc Undefined Major-Signal 1

629486 12197 l3 l3cc.cc Undefined Minor-Signal 1

629487 12198 l3 l3cc.cc ErrorIndex out of range 1

629488 12200 l3 l3cc.cc TransactionPointer shows to no transaction 1

629489 12201 l3 l3cc01state.cc Unused callcontrol timer expired in state 1 1













629502 12219 l3 l3cctr1state.cc Unused callcontrol timer expired in state 50 1

629503 12220 l3 l3ccrest2state.cc Unused callcontrol timer expired in state 62 1

629504 12221 l3 l3cc07state.cc Unused callcontrol timer expired in state 7 or 77 1




629540 12225 l3 l3mux.c Invalid Bcs Ref for reading key word 1

629583 12226 l3 l3sbc.c HW param of the system base is not valid 1

629658 12227 l3 l3mailio.c No response from scioh proc to service message from l3mailio proc 1

629659 12228 l3 l3mailio.c received watchdog signal when ServiceLoginConf or ServiceLogout expected in mailIoOpenPipe 1

629661 12229 l3 l3mailio Unexpected minor signal in MajorService in mailProc 1

629662 12230 l3 l3mailio.cc Received timeout when LoginConf or Logout signal was expected. 1

629663 12231 l3 l3mailio.cc Received timeout when DataAck or Logout expected. 1

629664 12232 l3 l3sbc.c RFPI params are fault 1

629665 12233 l3 l3sbc.c Broadcast Attributes are fault 1

629766 12234 l3 l3hdlc Could not start watchdog supervision for the process l3hdlcproc 1

629767 12235 l3 l3hdlc could not register the hdlc device with datalinks 1

629768 12236 l3 l3hdlc The l3hdlcproc was in the wrong state 1

629769 12237 l3 l3hdlc The channels requested were not contiguous, error in l3hdlc or datalinks 1

629770 12238 l3 l3hdlc An incorrect signal was received 1

629771 12239 l3 l3hdlc Could not allocate a channel for use 1

629772 12240 l3 l3hdlc Connecting over a primary interface and don't know how to proceed yet. 1

629773 12241 l3 l3hdlc could not get the next call reference 1

629774 12242 l3 l3hdlc Could not extract the b channel from the received signal 1

629775 12243 l3 l3hdlc Attempt to start an invalid timer ,. 1

629776 12244 l3 l3hdlc Attempt to stop an invalid timer 1

629777 12245 l3 l3hdlc Attempt to stop a timer which isn't running 1

629778 12246 l3 l3hdlc A buffer received from the hd proc had to be trown away. This is because there is no flow control in the hd and obviosely the performance of the system is not good enough. 1

629779 12247 l3 l3tarouter could not start watchdog supervision on the router process. 1

629780 12248 l3 l3tarouter An invalid MSN was received for the TA 1

629781 12249 l3 l3tarouter The wrong TEI was received 2

629782 12250 l3 l3tarouter An invalid l3 message was received. 1

629800 12251 l3 There are already MaxActiveSyb 1

629853 12252 l3 l3dlsrv 1

629854 12253 l3 l3dlsrv.hh AD2DLErrorUnexpSig. 1

629855 12254 l3 l3dlsrv AD2DLErrorUnexpTimeout 1

629856 12255 l3 l3dlsrv AD2DLErrorDownload 1

629857 12256 l3 l3dlsrv AD2DLErrorHWParam 1

629858 12257 l3 l3dlsrv AD2DLErrorPowerNotOk 1

629934 12258 l3 l3cc10state.cc Invalid portref in state 10 when message Hold Response received 1

629935 12259 l3 l3cc10state.cc Invalid portref in state 10 when message Retrieve Response received. 1

629946 12260 l3 l3mux.cc Invalid Bcs Ref for reading key word 1

629949 12261 l3 l3holdauxstate.c unknown HoldAuxiliary State 1

629972 12262 l3 l3holdauxstate.c Wrong state machine with auxiliaryState. 1

629992 12263 l3 d3ad2terminal ErrorTermState. 1

629993 12264 l3 d3ad2terminal ErrorUnexpSig 1

629994 12265 l3 d3ad2terminal UnexpTimeout 1

629995 12266 l3 d3ad2terminal HWParamNotOk 1

630031 12267 l3 l3cac03state.cc wrong cc type . 1

630035 12268 l3 l3cc10state.cc Error of Layer 3 message with l3CcSt10HoldReq. Message comes from the wrong side. 1

630036 12269 l3 l3cc10state.cc Error for incoming request message from layer 3 in l3CcSt10RetrieveReq. 1

630037 12270 l3 l3cc10state.cc Error in Timer for Hold in layer 3: l3CcSt10ModTmoTHold. 1

630038 12271 l3 l3cc10state.cc Error in timer signal for Hold in l3CcSt10ModTmoTHold / 1

630039 12272 l3 l3cc10state.cc Error in L3 timer l3CcSt10TmoTRetrieve. 1

630040 12273 l3 l3cc10state.cc Error in the portref origin from the Timer. in l3CcSt10TmoTRetrieve 1

630042 12274 l3 l3cac10state.cc wrong cc type 1

630055 12275 l3 l3masynchbridge.cc Error Mapping L3TbxMenuEnuC to MaTbxMenuEnuC - undefined value 1

630115 12276 l3 d3ad2sbc.cc

No more DectSystemBaseId available in the default location area 0. A port reset will be performed. No DectSystemBase object has been created. To solve this problem the installer

has to delete a system base in locarea 0 which is not operational, or he create a new system base and put it in an other loc area. 1

630117 12277 l3 l3xasynchbridge.cc failed to map l3MonTestFlagEnu to XaMonTestFlagEnu 1

630221 12278 l3 l3anaas2proces.cc could not convert portref to port 1

630223 12279 l3 l3anaamxproces.cc could not translate portref to analogport 1

630400 12280 l3 l3anaamxproces.cc AMx process received a signal with unknown minor of MajorMod 1

630401 12281 l3 l3anaamxproces.cc AMx process received a signal with a not treated Major 1

630402 12282 l3 l3allprconv.cc finding next Info Element in a L3 message failed becaus pointer to messagULL 1

630403 12283 l3 l3voicmxproces.cc CsyMxProc received signal with not treated minor of MajorMod 1

630404 12284 l3 l3voicmxproces.cc csyMxProc received signal with not treated Major 1

630405 12285 l3 l3anaanaproces.cc An error occured in the layer 3 call control of analog subscribers or trunks. Parameter 1: Analog port number, Parameter 2: 0, Parameter 3: Error code according 2

630456 12286 l3 l3cc.cc The Transaction found for this BCS Ref is in state 0 (NullSt). That should never happen because Transactions in state 0 have to be deleted before handling the next signal. This 1

630474 12287 l3 l3sbc.c An attribute of the system bases or dect network has been changed, and the system bases need to be reset. 1

630478 12288 l3 l3mt2proces.cc unknown MT2 message received in l3mt2proces 1

630606 12289 l3 l3cc.cc Invalid BCS ref: BCS ref is no more allocated in ArPool 1

630607 12290 l3 l3cc.cc Invalid BCS ref: This BCS ref is no more allocated in the AR Pool 1

630608 12291 l3 l3cc00state.cc Untreated message while Transaction was in NullActive State 1

630764 12292 l3 l3teahdlcadapter.cc Datalinks did not provide a telephone number for the outgoing HDLC TA call. Call aborted. 1

630778 12293 l3 l3cactrans.cc In St10 (QSIG) someone started a timer which is not allowed. 1

630790 12294 l3 l3muxproces.cc During initialization of CallRefs we found a port where the portRef is set to Undef. Param1 is the boardId, param2 is the relPortNr. SM seems to have a serious problem. 1

631103 12295 l3 l3cacxxstate.cc StatusReq received for NetCC or QSigCC in state param1 1

631104 12296 l3 l3cacxxstate.cc StatusReq received for unknown CC-type in state param1 1

634428 12297 l3 l3muxproces.cc ISDN L3 received a Signal with the Major "ConfChangeAnnounceCard" but the Minor of the signal is not handled. The received minor is copied to Param1. 1

654607 12298 l3 l3muxproces.cc L2 link could not be set 2

654968 12299 l3 l3allcommon.cc Invalid TEI in Keyword. 1

656049 12300 l3 l3allcommon.cc function l3AllSetL2Link: Invalid BcsRef has been found 2

656183 12301 l3 l3muxproces.cc Invalid BcsRef as param in function l3MuxCheckIfBcsRefEntryExist 1

656812 12302 l3 l3anaam2proces.cc This portreference is unknown. 1

658059 12303 l3 l3voimailioprocess.cc Unexpected signal received. 1

659785 12304 l3 l3muxprocess.cc We set the portRef to NULL because of the bcsRef didn't match an entry in the BcsRef table. 1

661465 12305 l3 l3smstl.c Error detected in SMS TL: Illegal state, unexpected signal or pointer to message is lost parameter 0: state parameter 1: major/minor parameter 2: 0 (normal) or 1 (pointer to 1

662554 12306 l3 l3teahdlcadapter.cc This error report is used to check if the L3/L2 state machine behaves correct. 1

662788 12307 l3 l3voimailioproces.cc strange string from AVS received 2

663158 12308 l3 l3voimailioproces.cc Couldn't open channel to retrieve voice messages and greetings from the Voicemail module 1

663160 12309 l3 l3voimailioproces.cc Strange "MailWaiting" string from AVS received 1

663161 12310 l3 l3voimailioproces.cc Strange "MailToRemove" string from AVS received 1

663162 12311 l3 l3voimailioproces.cc Strange "MailDeleted" string from AVS received 1

663163 12312 l3 l3voimailioproces.cc Strange "MailGreetingState" string from AVS received 1

663164 12313 l3 l3voimailioproces.cc Strange "MailRecGreetingStopped" string from AVS received 1

663165 12314 l3 l3voimailioproces.cc Strange "MailPlayGreetingStopped" string from AVS received 1

663166 12315 l3 l3voimailioproces.cc Strange "MailPlayMsgStopped" string received 1

663167 12316 l3 l3voimailioproces.cc Strange "MailPassword" string from AVS received 1

663168 12317 l3 l3voimailioproces.cc Unknown message type from AVS received 1

663169 12318 l3 l3voimailioproces.cc Invalid primitive 1

663170 12319 l3 l3voimailioproces.cc Invalid Major received 1

663171 12320 l3 l3voimailioproces.cc Invalid Minor for MajorAvsVm received 1

663228 12321 l3 l3voimailioproces.cc Could not send a signal to the AVS via HDLC-channel 0x03 1

663229 12322 l3 l3voimailioproces.cc The AVS did not send any response on HDLC-channel )x03 1

663996 12323 l3 l3voimailioproces.cc Received message is too long or corrupted 1

685687 12324 l3 l3anaam2proces.cc Unknown MT2 protocol code received for analog subscriber. Param 1: PortRef, Param 2: MT2 code, Param 3: mt2_index 1

685688 12325 l3 l3anaam2proces.cc Unknown MT2 protocol code received for analog trunk. Param 1: PortRef, Param 2: MT2 code, Param 3: mt2_index 1

688533 12326 l3 l3mt2asaconf.cc

Configuration signal to an analogue trunk port can't be sent because building the signal failed. Param 1: port reference Param 2: locale id or node id (see error report). Param 3:

=0: OutDialImp and/or Flash and/or CcbDoubleAnswerTimes config can't be sent. =1: OutDialImp config can't be sent. =2: Flash config can't be sent. =3: CcbDoubleAnswer config

can't be sent. =4: OutDialImp and ccbDoubleAnswerTimes config can't be sent. 6

688534 12327 l3 l3mt2asaconf.cc Sending a trunk configuration signal to an analogue trunk port is impossible because building the packet failed. Param 1: Port reference Param 2: Trunk ID Param 3: Info length in 1

688535 12328 l3 l3mt2tnconf.cc

Configuration signal to an analogue subscriber port can't be sent because building the signal failed. Param 1: port reference. Param 2: locale id or node id (see error report).

Param 3: =0: Flash and/or HookOn and/or ClipAlertSigType config can't be sent. =1: Flash config can't be sent. =2: HooOn config can't be sent. =3: ClipAlertSigType config can't be

sent. =4: Flash, HookOn and ClipAlertSigType config can't be sent. 5

698050 12329 l3 l3/l3teahdlcadapter.cc The facility containing ArTypFacInfoHdlcPeerC information was not found in the message. The HDLC information cache could not be updated. Param 1: Message type (l3alldef.hh) 2

707709 12330 l3 l3anaanaproces.cc The analogue port range is limited to UInt8 (0..255). This range has been exceeded. Parameter 1: Actual port number value, Parameter 2: 0, Parameter 3: Error location. 2

721298 12331 l3 l3cac01state.cc A facilityInfo infoElement has been found but could not be deleted 1

721299 12332 l3 l3cacsend.cc A facilityInfo infoElement has been found but could not be deleted 1

721978 12333 l3 l3mt2asaconf.cc The Collect Call Blocking OIM object PrAnalogDoubleAnswerConfig OIM doesn't exist. Param 1: LocaleId. 2

734810 12334 l3 l3teaterminalc.cc Inactivity event was not handled. 1

736934 12335 l3 l3anaavp.cc memcpy_s failure The data could not be copied properly. p1: error code of memcpy_s p2: target data length p3: source data length 1

745597 12336 l3 l3anaanaproces.cc Writing the file "/home/data/autobothwayop.txt" was not possible. Parameter 1: Function status, Parameter 2: ABWO value in seconds, Parameter 3: 0. 1

745598 12337 l3 l3anaanaproces.cc Unknown signal received in L3AnaProcC. Parameter 1: Sender process ID, Parameter 2: Signal major, Parameter 3: Signal minor. 1

765015 12338 l3 l3anaanaproces.cc I think the call reference length is always 1 for analogue ports else create an Error Report. Parameter 1: analogPortNr. Parameter 2: callRefLength. Parameter 3: 0. 1

769954 12339 l3 l3anaanaproces.cc


"[AnalogLayer3TimerSettings]","T3A1Ms" can't be converted from string to UInt32. =2: Attribute "[AnalogLayer3TimerSettings]","T3A1Ms" can't be found in the localisation file.

=3: Attribute "[AnalogLayer3TimerSettings]","T3AtMs" can't be converted from string to UInt32. =4: Attribute "[AnalogLayer3TimerSettings]","T3AtMs" can't be found in the

localisation file. =5: Attribute "[AnalogLayer3TimerSettings]","T3LrMs" can't be converted from string to UInt32. =6: Attribute "[AnalogLayer3TimerSettings]","T3LrMs" can't be

found in the localisation file. =7: Attribute "[AnalogLayer3TimerSettings]","T3AxiMs" can't be converted from string to UInt32. =8: Attribute

"[AnalogLayer3TimerSettings]","T3AxiMs" can't be found in the localisation file. =9: Attribute "[AnalogTrunkSettingsGeneral]","AustraliaFeatureAbwo" can't be converted from 2

773113 12340 l3 l3anaam2proces.cc The portRef can't be converted to analogPortNr. ==> InService/OutOfService signal can't be sent further to port. Parameter 1: portRef. Parameter 2: absPortNr. Parameter 3: 1

792240 12341 l3 l3cac00state.cc Function serviceTrans (received the message Service with a state different than InService. 1

792267 12342 l3 l3cacsend.cc Function l3CacSendServiceAck: P1: 1: could not find info element ChangeStatus 2: could not find info element ChannelIdentification 3: could not copy info element 2

628060 14001 l2 l2ta.c wrong Major/Minor received P: Major, Minor, state 1

628061 14002 l2 l2ta.c problem with DataAck P: state, nr of Data to ack 1

628293 14003 l2 l2ta.c Signal supplied contains more data chars than buffer allows 1

628294 14004 l2 l2rbccont.c l2RbcP == NULL, at l2RbcStartSyb or l2RbcStopSyb 1

628295 14005 l2 l2rbccont.c l2RbcDeassignSecondReq: Wrong port- or chan-Nr 1

628296 14006 l2 l2rbcroute.c message received from prx ignored because it is too large. 1

628297 14007 l2 l2rbcroute.c Strange behaviour, possibly repeated ConnInds received 1

628298 14009 l2 l2rbcroute.c Incorrect message received. 1

628316 14010 l2 l2sapappend.c Unknown primitive, function l2SapAppend_sp2. 1

628318 14011 l2 l2sapappend.c Unknown interface; function l2SapAppend_sp2. 1

628320 14012 l2 l2sapappend.c Unknown primitive. 1

628321 14013 l2 l2sapappend.c Unknown port interface. 1



628324 14016 l2 l2sapappend.c Invalid SAPI. 1

628325 14017 l2 l2sapappend.c Broadcast or undefined Interface type 1




628329 14021 l2 l2sap.c Unknown primitive 1

628330 14022 l2 l2sap.c Invalid Message 1

628331 14023 l2 l2sap.c Invalid SAPI 1

628332 14024 l2 l2sap.c Invalid SAPI 1

628359 14025 l2 cptlib.c Error has been detected in component Cpt 1

628887 14026 l2 prxs.c A Timeslot was found that was not switched off. Now do switch it high-z 1

628892 14027 l2 l2rbcroute.cc Handset ConnInd message ignorred/discarded 1

628894 14028 l2 l2rbcroute.cc A search of the RBC tables has failed to find any records with the used keys 1

629119 14029 l2 l2rbccont.c Mute called for DECT HS without B-channel 1

629120 14030 l2 l2rbccont Deassignment of DECT HS B-channels while there were none 1

629121 14031 l2 l2rbccont.c DECT handover 'switch' while just one B-channel was allocated 1

629122 14032 l2 l2rbcroute.cc B-channel exists while linkdown (release handshaking problem) 1

629203 14033 l2 l2rbccont The type of I frame was not regonized in a ConnInd message 1

629209 14034 l2 l2rbcroute.cc a DECT link is released while there's still a B-channel allocated this B-channel is now forced to be released from l2 2

629256 14035 l2 l2sapappend.c supplementary info for error 14014: binary content of firts 12 bytes of inSigP->message 1

629278 14036 l2 prxi.c Data from the PA has been disgarded because the PBX is too slow to process V24 data at this rate. Check the PA switches 4 and 5. Either H/W (CTS) or S/W (Xon/Xoff) flow control 1

629305 14037 l2 prxs.c parameter out of range 1

629367 14038 l2 l2ta.c TA data connection (SSA) disconnected although not all datas physically transmitted! 1

629376 14039 l2 l2dlink.c wrong minor received 1

629377 14040 l2 l2dlink.c untreated major received 1

629378 14041 l2 l2dlink.c unexpected layer2 config command received 1

629379 14042 l2 l2dlink.c unexpected l2b message received 1

629514 14043 l2 l2dlink.c command not expected at this type of port 1

629548 14044 l2 l2prxi.cc The PRIMA transmit queue is not consistent or the queue quota is at the limit. If the compiler flag DEBUGPRX is set, the queue is checked after every change. Param 1: value 1 5

629549 14045 l2 prxi.cc Unknown interrupt status 1

629550 14046 l2 prxi.cc Multiple interrupts of the same prima in progress. Question: Has this ever happened? 2

629551 14047 l2 prxi.cc Unknown signal received 1

629552 14048 l2 prxi.cc NULL pointer received 1

629553 14049 l2 prxi.cc Transmit buffer error 1

629554 14050 l2 prxm.cc Unknown state during initialisation of prima 1

629555 14051 l2 prxm.cc Unknown threshhold of prima 1

629556 14052 l2 prxm.cc Invalid step by checking the states of the P-ports 1

629557 14053 l2 prxm.cc Invalid state by reinitialising a P-port 1

629638 14054 l2 l2rbccont ForceLinkDown called to clear link as L2 ConnInds failed. 4

629693 14055 l2 prxl.c In the function PrxChanIdPrx, No Prima found in configuration 1

629759 14056 l2 l2hdlc Could not start watchdog supervision for l2hdlcproc 1

629760 14057 l2 l2hdlc The received signal contains an invalid channel 1

629761 14058 l2 l2hdlc The process was in the wrong state 1

629762 14059 l2 l2hdlc An attempt was made to get the channel from the wrong signal 1

629763 14060 l2 l2hdlc The wrong signal was received 1

629764 14061 l2 l2comhdlc An attempt was made to send an incorrect signal 2

629765 14062 l2 l2comhdlc.cc

This error happens during a remote maintenance session via ISDN (PRI or BRA). If the PBX is very busy, it will not process fast enought incoming or outgoing data packets: - The

Upstream data queue can store 32 buffers of around 1500 Bytes - The Downstream data queue can hold 10 buffers of around 1500 Bytes If a new buffer arrives and the queue is

full, then the new buffer is simply thrown away and this errorReport is sent. (( Old description was: Upstream: A buffer received from the hd proc had to be trown away. This is

because there is no flow control in the hd and obviosely the performance of the system is not good enough. Downstream: A buffer received froom l3 proc had to be trown away, 5

630034 14063 l2 l2rbccont.cc Log for B Channel unavailable for Dect system Base. 1

630056 14064 l2 l2masynchbridge.cc Error Mapping L2TbxMenuEnuC to MaTbxMenuEnuC - undefined value 1

630189 14065 l2 l2dchbroad.cc wrong parameter tei passed to f. 1

630205 14066 l2 l2sap.cc wrong major passed to the function 1

630220 14067 l2 l2dchisdnmux.cc could not translate between portref and absolute port nr 1

630504 14068 l2 l3dchlinkmon.cc end of buffer overwritten 1

630513 14069 l2 l2prxi.cc param of signal out of range 1

630681 14070 l2 l2prxi.cc A message was not sent completely, will be sent again. 1

630766 14072 l2 l2ad2ipskt.cc The port doesn't exist and/or datalength too long. 1

630767 14074 l2 l2ad2ipskt.cc No socket found. Perhaps wrong socket id. 1

630957 14075 l2 l2ad2ipskt.cc SlotId and LocationId are not equal. 1

631155 14076 l2 l2dtei.c Port exceeded range of Isdn ports. 1

631157 14077 l2 l2dteipmp.c Port exceeded range of ISDN ports. 1

631190 14078 l2 l2prxmon.cc l2prxmon was not able to print its data. 1

636545 14079 l2 l2sap.cc LinkHandler failed to send request/signal to nodeId specified in param1. 1

647215 14080 l2 l2dchisdnmux.cc could not convert portRef to isdn data structure. given portRef is not an isdn port it need to be for this command. 1

650171 14081 l2 l2prxl.cc The given port is not an Ad2 port. 1

657230 14082 l2 l2dchisdnmux.cc could not find link with given tei (assert replaced by errorReport) (this could happen in havy loaded systems where lot of layer2 link timeouts happen) 1

658842 14083 l2 l2sapappend.cc The port reference is not valid. 1

661463 14084 l2 l2smsphl.cc Error detected in SMS PHL: Illegal state, unexpected signal or pointer to message is lost parameter 0: state parameter 1: major/minor parameter 2: 0 (normal) or 1 (pointer to 1

661464 14085 l2 l2smsdll.c Error detected in SMS DLL: Illegal state, unexpected signal or pointer to message is lost parameter 0: state parameter 1: major/minor parameter 2: 0 (normal) or 1 (pointer to 1

662207 14086 l2 l2dchisdnmux.cc portref in signal is not an ISDN port. 1

669109 14087 l2 l2smsphl.cc error: no valid timeslot and highway for the fsk sender and receiver 1

682846 14088 l2 l2prxm.cc Unknown Major received 1

682851 14089 l2 l2prxl.cc Link handler could not send a signal 1

683706 14090 l2 l2prxl.cc Failed to send signal to master. Param1: Major, Param2: Minor 1

705274 14091 l2 l2prxi.cc

Although L2Prxi handshake to the D3 domain signalled stop, the PRIMA sending queue is flooded with messages to send. The stop level is 6 messages, in the queue are more than

100 messages. Please address questions regarding this error code to the Terminals Team! Parameters: 1: PRIMA ID 2: Channel ID 3: AD2 stimulus 2

709925 14092 l2 l2prxi.cc Tracking for br40029. l2PrxTimerProc supervises errMagic. In case errMagic in maerrcont.cc gets overwritten, the PBX crashes. Parameter 1: value of corrupted errMagic. 2

710048 14093 l2 l2comhdlc.cc The server can't attach/detach the client. Param 3: 0 = The server can't attach the client. 1 = The server can't detach the client. Param 1: myObserver. Param 3: Major of 2

710053 14094 l2 l2comhdlc.cc Analogue modem: We should never receive this signal type in this state! Param 1: Signal type. Param 2: state. Param 3: Error numeration. 3

710230 14095 l2 l2comhdlc.cc Unexpected state of the analogue remote access (analog mode) process. Param 3: Error numeration. Param 1 and 2: depending on error number (param 3). See code. 2

727399 14096 l2 l2dsiad2channelc.cc Unexpected message in this state: TxMessageSent although myTxBusy = false param 0 = SysPortId param 1 = SysChanId param 2 = L2PortStateEnu 1

727401 14097 l2 l2dsiad2channelc.cc Transmit queue overflow param 0 = SysPortId param 1 = SysChanId param 2 = 0 1

727402 14098 l2 l2dsimanprocc.cc Port generated too many interrupts param 0 = SysPortId param 1 = SysChanId param 2 = L2PortStateEnu 1

727403 14099 l2 l2dsimanprocc.cc Unknown parameter received param 0 = SysPortId param 1 = SysChanId param 2 = L2PortStateEnu: Unknown! 1

727404 14100 l2 l2dsimanprocc.cc primaInit queue overflow param 0 = inSlotId 1

727405 14101 l2 l2dsimanprocc.cc Signal received for channel that was not created param 0 = SysPortId param 1 = SysChanId param 2 = MinorOf(sigP->sig) 1

729075 14102 l2 l2dsimanprocc.cc Unknown signal received param 1: MajorOf param 2: MinorOf param 3: 0 1

729077 14103 l2 l2dsimanprocc.cc l2PrxDectSyncConnSybSync, l2PrxDectSyncDiscSybSync: Could not translate between portref and absolute port nr param 1: SmPortReferenceC portRef param 2: 1

729079 14104 l2 l2dsiupperasynchfacadec.cc Couldn't send signal to L2PrxManProc/L2DsiManProc param 1; MajorOf param 2: MinorOf param 3: 0 1

729135 14105 l2 l2dsiasynchfacadec.cc Unknown Minor received param 1: MinorOf(sigP->sig) 1

729136 14106 l2 l2dsiasynchfacadec.cc Failed to send signal to L2DsiManProc param 1: Major param 2: Minor 1

735843 14107 l2 l2dsimanprocc.cc Illegal portId received (>= ArCfgConPrimaPortNbrMax). Parameter 1: Major Parameter 2: Minor Parameter 3: portId 1

735845 14108 l2 l2dsimanprocc.cc

Illegal portRef received: getAd2FromAbs(portref) returns illegal portId (>= ArCfgConPrimaPortNbrMax). Error detected in getRefToPortP(inPortref), called from:

getRefToChannelP(inSigP->common.portref, inSigP->common.chanId); called at receiving TgAd2Send. Parameter 1: inPortRef Parameter 2: portId Parameter 3: 0 2

735846 14109 l2 l2dsiportc.cc Illegal channelId (>= OurNumOfChannels). Detected in function getDsiChannelP(SysChanId inChanId). Parameter 1: MyPortref Parameter 2: MyPortId Parameter 3: inChanId 1

741021 14110 l2 l2prxhost.cc Invalid port reference. port == SmAbsolutePortNrC::Undef 1

741022 14111 l2 l2dsiupperasynchfacadec.cc Signal could not be sent p1: Major p2: Minor 1

741879 14112 l2 l2dchtei.cc The consistency check of the TEI list in L2 D-Channel failed. There were more than 9 items in the list, but the maximum is 8 ... 1

741880 14113 l2 l2dchtei.cc The consistency check of the TEI list in L2 D-Channel failed. The list was rebuilt (to be sure the list is no ring), but there were more than 9 items in the list ... 1

741884 14114 l2 l2dchtei.cc

The insertion of a new element into the TEI list in L2 D-Channel failed. The tuple <tei, sapi> is already in the list of this port. The data was thrown away (as it is already in the list).

The only question that remains: is there a problem in the higher layers, that they reinstruct the L2 D-Channel to insert the same tuple again ... Parameters: - p1 : port - p2 : tei -

p3 : sapi 2

755912 14115 l2 l2dcherr.cc L2-DChannel-Error: unknown error character received 1

755916 14116 l2 l2dcherr.cc unknown signal received ... 1

755920 14117 l2 l2dchpp.cc event signal (MajorMod) not handled in current l2 state 1

755921 14118 l2 l2dchpp.cc unknown Timeout Signal received. Check why this is sent to l2DchPPProc() 1

755922 14119 l2 l2dchpp.cc Deactivate Indication not treated in current state. 1

755923 14120 l2 l2dchpp.cc There is no data structure for the expired timer for the given port available ... 1

755924 14121 l2 l2dchtei.cc Can not stop timer. Unknown timer passed to function. 1

755925 14122 l2 l2dchtei.cc Can not restart timer. Unknown timer passed to function. 1

755926 14123 l2 l2dchtei.cc Unknown TEI message received. Were there protocol changes ... 1

755928 14124 l2 l2dchtei.cc received unknown Timer Signal in l2DchTeiProc() 1

755929 14125 l2 l2dchppcom2.cc No Signal available for sending to L3. Where was it lost? 1

755930 14126 l2 l2dchppcom2.cc Unknown control-field. Can not compose L2 message. 1

755931 14127 l2 l2dchppcom2.cc L2 D-Channel: Poll_0 not supported in supervisory message 1

755932 14128 l2 l2dchppcom2.cc Unknown value for l2-dchannel-poll field. Was poll enum extended? 1

755933 14129 l2 l2dchteipmp.cc L2-D-Channel: unknown type for management message 1

755934 14130 l2 l2dchteipmp.cc Unkown Timer-Job value. Check the enum. Was there a change? 1

755935 14131 l2 l2dchteipmp.cc L2 D-Channel: unknown message type found 1

755936 14132 l2 l2dchteipmp.cc L2 D-Channel: PMP unknown signal major received 1

755981 14133 l2 l2dchteipmp.cc Network timer T201 only for ISDN ports in Master mode. 1

755982 14134 l2 l2dchteipmp.cc User timer T202 only for ISDN ports in Slave mode. 1

755983 14135 l2 l2dchteipmp.cc ID Request is only handled for ISDN ports in Slave mode (User). 1

755984 14136 l2 l2dchpp5.cc unknown signal minor received in state l2DchPp5Proc() [state 5] 3

755985 14137 l2 l2dchpp5.cc Unknown Timer received in l2DchPp5Tim() [state 5] 2




755989 14141 l2 l2dchpp4.cc No timers handled in l2DchPp4Tim() [state 4] 1

755990 14142 l2 l2dchteipp.cc Unknown signal major received in l2DchTeiTreatPtPtMessage() only MajorMod acceptable 1

755991 14143 l2 l2dchmux.cc Unknown signal minor received in L2DchMuxProcC::handleSig() 1



755994 14146 l2 l2dchpp8.cc Unknown event_info received in l2dpp8_peer_rec_rr_rej() [state 8] (reject Receive-Ready) 1

755995 14147 l2 l2dchpp8.cc Unknown event_info received in l2dpp8_peer_rec_rnr() [state 8] (Receive-Not-Ready) 2



763376 14150 l2 l2dsimanprocc.cc Wrong port interface type, the signal is ignored. p1: port ref p2: port type (SmPortInterfaceTypeC) p3: - 1

770632 14151 l2 l2dchlink.cc

Failed to read ISDN parameters from localisation file. Parameter 2: 1 - Could not open localisation file 2 - RestartActivateL2 Section/key missing or invalid 3 -

PeriodicEstablishL2 Section/key missing or invalid 4 - ReportL2State Section/key missing or invalid 5 - AllowTeiMessageIdRemove Section/key missing or invalid 3

784580 14152 l2 l2rbccont rbcHdlConnInd(): subP (pointer to RbcDectIdSubRec) couldn't be set 1

784995 14153 l2 l2dchteipmp.cc L2 D-Channel: Cancel t202 did not return a timeout signal. P1: port P2: TEI 1

628045 16001 hd hdpgppatterngen.c Unknown bio scan job to start or stop 1

628046 16002 hd hdpgppatterngen.c A bio scan service is started several times 1

628047 16003 hd hdpgppatterngen.c Attempt to stop a bio scan job by a not authorised proc. 1

628048 16007 hd hdpgppatterngen.c Unknown Major or Minor in Bio scan answer. 1

628049 16008 hd hdpgppatterngen.c Possible mismatch in the organisation of the LED pattern lists. 1

628050 16009 hd hdpgppatterngen.c Impossible LED nr, blink code or missmatch in pattern list 1

628051 16013 hd hdpgppatterngen.c No several special conditions possible in LED blink process 1

628062 16015 hd hdssa.c empty message to SSA P: Minor, length 1

628070 16016 hd hdpgpbioscan.c Wrong door number in the signal received with an OseReceiveAll(). 1

628079 16017 hd hdpgpbioscan.c unespected Minor in MajorMod case. 1

628080 16018 hd hdpgpbioscan.c unespected door value. 1

628094 16020 hd hdanaprocc.cc Access to undefined general call relay. Only Msn 1 is available. Parameter 1: Relay Msn, Parameter 2: On/Off, Parameter 3: 0. 4

628100 16021 hd hdv24duart.c Unexpected V24Channel. Ignored. 1

628101 16022 hd hdv24duart.c Parameter value not allowed. Ignored. 1

628105 16023 hd hdv24duart.c no RTS/CTS supported for this v24 channel. 1

628178 16024 hd hdcsycourtesy.c The courtesy was not correctly stopped after a play- or record command. 1

628179 16025 hd hdcsycourtesy.c This textnumber is not defined. Play- or Reccommand ignored. 1

628181 16026 hd hdpgpmain.c Unknown signal Major for Hd Pgp main process received 1

628182 16027 hd hdpgpmain.c Unknown Minor for timeout for Hd Pgp main process received 1

628183 16028 hd hdpgpmain.c Impossible LED nr for stopping the LED blinking 1

628184 16029 hd hdpgpmain.c Unkown LED to toggle for board bcs8 1

628186 16030 hd hdpgpmain.c Unknown signal Minor with Major MajorPgp in hdPgpMainProc 1

628187 16031 hd hdpgpmain.c Unknown signal Minor with Major MajorPgpSwitch in hdPgpMainProc 1

628197 16032 hd hdmod2s2tmup8 A wrong board is inserted on left slot, ATTENTION : the power doesn't come 1

628314 16033 hd hdtstmemory.c ROM Checksum failed 1

628315 16034 hd hdtstmemory.c RAM Test failed 1

628317 16035 hd hdtstmemory.c Checksum on last EPROM: The number of EPROM's is not identically with the programm think he have (see file hdhwmemadr.h) or the not available indicator (-1) is not set. See 1

628334 16036 hd hdbiobcs8.c Unknown MUP HW coding for platform bcs8 1

628341 16037 hd hdqccrisccmds.c

The busy wait in hdTestAndSetFLG() does not want to wait forever. There must be a real big problem, that causes the CPM-RISC not to reset the FLG bit in the command register

`CR'. This FLG should be 0, so that a new command could be entered. Currently I think this should never happen. Let's hope that I am right. --Franz 1

628342 16038 hd hdv24uartzee.c The hdCpmIssueRiscCommand() failed. This is due to a bad combination of <opCode,channel>. Reread the MC68360 USER MANUAL p.7-6 table 7-1 on valid combinations of the 1

628343 16039 hd hdv24uartzee.c Unexpected V24Channel --> coding error, ZEE supports V24ChA only! 1

628344 16040 hd hdv24uartzee.c The baud rate (rxBaud|txBaud) is wrong, unknown enum. Probably overwritten. 1

628345 16041 hd hdv24uartzee.c bitFormat of v24Config contains garbage. Probably overwritten by some bad pointer manipulations. 1

628346 16042 hd hdv24uartzee.c parityBit of v24Config contains garbage. Probably overwritten by some bad pointer manipulations. 1

628347 16043 hd hdv24uartzee.c stopBit of v24Config contains garbage. Probably overwritten by some bad pointer manipulations. 1

628349 16044 hd hdv24uartzee.c A character was received and discarded due to lack of buffers. Solution: configure more BD for receiving. 1

628350 16045 hd hdv24uartzee.c A break character was received. And now? 1

628351 16046 hd hdv24uartzee.c Framing or Parity Error. Is this a Layer1 problem? 1

628352 16047 hd hdqcccpmhdlc.c ZEE-internal error. CPU tried to issue a command to the Communications Processor Module (CPM) and it failed. 1

628353 16048 hd hdqcccpmhdlc.c An unknown Minor was sent from layer2 1

628354 16050 hd hdqcccpmhdlc.c During transmission in i-channel an error occured 1

628355 16051 hd hdqcccpmhdlc.c During reception in i-channel an error occured 1

628356 16052 hd hdqcccpmhdlc.c got invalid message from layer2 1

628366 16054 hd hdv24uartzee.c V24-Error: For some reason the READY-BIT in the status of the buffer descriptor was not cleared even after an oseDelay(50). If this problem occures V24 needs more 1

628381 16055 hd hdv24uartzee.c the value for `stopbit' in v24Config (hdbvar) nor TwoStopBits. Structure Overwritten? 1

628382 16056 hd hdv24uartzee.c the value for `parityBit' in v24Config (hdbvar) is none of (NoParity,EvenParity,OddParity). Someone must have overwritten the structure or did use an `int' to write the parityBit. 1

628383 16057 hd hdv24uartzee.c unknown baudrate value: someone must have updated the enum and forgot to update the code! As you already know: <shit happens>. 1

628384 16058 hd hdfld.c writeBlock: byte can't be written 1

628385 16059 hd hdfld.c pollErase: erase failed 1

628386 16060 hd hdfld.c writeBlock: writeBlock failed 1

628387 16061 hd hdfld.c startSectorErase: erasing sector with locks, application may read garbage 1

628388 16062 hd hdfld.c stopSectorErase: sector couldn't be erased successfully 1

628389 16063 hd hdfld.c hdfldStartDevice: attempt to start illegal device 1

628390 16064 hd hdlta.c This dummy routine should not be called 1

628391 16065 hd hdlta.c Non-Existant register 1

628392 16066 hd hdlta.c Non-Existant module 1

628393 16067 hd hdltd.c Invalid port number for this module 1

628394 16068 hd hdltd.c sync-mux can't be set on LTD 1

628395 16069 hd hdltd.c Invalid module 1

628396 16070 hd hdltd.c Emergency mode not possible on LTD 1

628397 16071 hd hdltd.c Non-existant register 1


628399 16073 hd hdmaa.c Non-Existant chip select 1

628400 16074 hd hdmaa.c Invalid MAA type 1

628401 16075 hd hdmaa.c Invalid port number 1

628402 16076 hd hdmat.c Invalid MAT type 1

628403 16077 hd hdmat.c Invalid port number 1

628404 16078 hd hdmat.c Invalid port number for first port of this module 1

628406 16079 hd hdlta.c Invalid LTA interrupt 1

628407 16080 hd hdlta.c Invalid LTA port number 1

628408 16081 hd hdlta.c Invalid module 1

628409 16082 hd hdlta.c Invalid tvaId 1

628410 16083 hd hdlta.c Invalid module type 1

628411 16084 hd hdlta.c Invalid module type 1

628412 16085 hd hdltd.c Invalid controller 1



628415 16088 hd hdltd.c This dummy routine should not be called 1

628416 16089 hd hdltd.c Signal should not have been received 1

628417 16090 hd hdltd.c Signal should not have been received 1

628418 16091 hd hdltd.c Invalid LTA board type 1

628419 16092 hd hdltd.c Invalid port number 1

628420 16093 hd hdltd.c Invalid DTMF decoder number 1

628421 16094 hd hdmaa.c Invalid DTMF decoder number 1

628422 16095 hd hdmaa.c Invalid connection state 1

628423 16096 hd hdmaa.c Invalid line state 1

628424 16097 hd hdmaa.c Invalid MAA port 1

628425 16098 hd hwdrvlpi.c Invalid base plate 1

628426 16099 hd hwdrvlpi.c Invalid module 1




628430 16103 hd hwdrvmdn.c Invalid module/register 1

628431 16104 hd hwdrvmdn.c Invalid port number 1




628435 16108 hd hwdrvmdn.c Invalid first port 1


628437 16110 hd hwdrvmdn.c Invalid module/port combination 1

628438 16111 hd hwdrvmdp.c Invalid module/port combination 1

628439 16112 hd hwdrvmdp.c Invalid first port 1

628440 16113 hd hwdrvmdp1.c Invalid module/port combination 1

628441 16114 hd hwdrvmdp1.c Invalid register value 1

628442 16115 hd hwdrvmdp1.c Invalid first port value 1

628443 16116 hd hwdrvmds.c Invalid module/port combination 1

628444 16117 hd hwdrvmds.c Invalid port value 1

628445 16118 hd hwdrvmds.c You can't set EMERGENCY on an MDS 1

628446 16119 hd hwdrvmds.c Invalid first port value 1

628447 16120 hd hwdrvmdt.c Invalid module/port combination 1

628448 16121 hd hwdrvmdt.c You can't set power on an MDT 1

628449 16122 hd hwdrvmdt.c Invalid port value 1

628450 16123 hd hwdrvmdt.c Invalid port value 1

628451 16124 hd hwdrvmdt.c You can't set EMERGENCY on an MDT 1

628452 16125 hd hwdrvmdt.c Invalid first port value 1

628453 16126 hd hwdrvmpi.c Invalid module 1

628454 16127 hd l1dmpwr.c Invalid timer 1

628455 16128 hd l1dmpwr.c Invalid timer 1

628487 16129 hd hdtstmemory.c The read application size from APB (Application Parameter Block) in the application Flash, is bigger than the physical Flash size 1

628488 16130 hd hdtstmemory.c The checksum for a not existing Flash device should be buildt (check with enum FlashSortType) 1

628490 16131 hd hdtstmemory.c An unknown RAM device should be checked 1

628500 16142 hd hdspauzee.c open_buffer_ram has been called twice in a row (there should have been a close_buffer_ram between them!!!). Look at the call stack to find out who caused the trouble. 1

628502 16152 hd hdtstltk.c Unknown runstate for EPIC-test 1

628503 16153 hd hdichhscxdrv.c I-Channel HSCX access-test failure 1

628504 16154 hd hdichhscxdrv.c I-Channel HSCX send/receive-test channel B failure 1

628505 16155 hd hdichhscxdrv.c I-Channel HSCX interrupt-test channel B failure 1

628506 16156 hd hdepic.c EPIC access-test failure 1

628507 16157 hd hdepic.c EPIC interrupt-test failure 1

628508 16158 hd hdepic.c IOM2-test failure 1

628509 16159 hd l1disacdrv.c ISAC access-test failure 1

628510 16160 hd l1disacdrv.c ISAC interrupt-test failure 1

628511 16161 hd l1disacdrv.c ISAC: It is not possible to switch the ARLoop (ARL) 1

628512 16162 hd l1disacdrv.c ISAC: It is not possible to activate layer 1 1

628513 16163 hd l1dacfadrv.c ACFA access-test failure 1

628514 16164 hd l1dacfadrv.c ACFA interrupt-test failure 1

628515 16165 hd l1dhscxdrv.c HSCX access-test failure 1

628516 16166 hd l1dhscxdrv.c HSCX interrupt-test failure 1

628517 16167 hd l1dhscxdrv.c HSCX send/receive-test channel A failure 1

628518 16168 hd hdepic.c IOM2 port-test failure 1

628519 16169 hd hdtstltk.c S-Bus power-test failure 1

628520 16170 hd hdmaa.c MAA port-test failure 1

628521 16171 hd hdbiozee.c The 5V power is not present 1

628522 16172 hd hdbiozee.c The 40V power is not present 1

628523 16173 hd hdbiozee.c The 48V power is present 1

628524 16174 hd hdzfkzee.c Not possible to write in a register of the ZFK - chip 1

628525 16175 hd hdmusac.c Not possible to write in a register of the MUSAC chip 1

628526 16176 hd hdsytag.c Not possible to write in a register of the SYTAG chip 1

628527 16177 hd hdsytag.c There isn't a SYTAG on board 1

628528 16178 hd hdrtcv3021.c Not possible to write in a register of the RTC chip 1

628529 16179 hd hdrtcv3021.c The RTC don't work's 1

628530 16180 hd hdbiozee.c The general call relais must be nr 4 1

628531 16181 hd hdbiozee.c Wrong relaisnumber (possible nr are 1,2 and 3) 1

628532 16182 hd hdbiozee.c The musicvolume is out of range (1..8) 1

628533 16183 hd hdbiozee.c There are only 8 inputswitch's on the ANSA ZEE 1

628534 16184 hd hdbiozee.c There is a wrong reset cause 1

628535 16185 hd hdbiozee.c The slotnumber for the PCmcia card's is wrong 1

628536 16186 hd hdbiozee.c There is a wrong slotnumber on the mup 1

628537 16187 hd hdtstmemoryzee.c A RAM or ROM device with a non valid address range is tested by selftest task 1

628544 16188 hd hdspaultk.c Power - Failure on linecard 1

628546 16189 hd hdqcccpmgpt.cc Hardware timer of QCC has expired with unassigned function. Parameter 1: Timer index (0..3) Parameter 2: 0 Parameter 3: 0 3

628547 16190 hd hdtosserver.cc The function has been called with a wrong timer ID parameter or there is no free entry for a new timeout. Parameter 1: timer ID, Parameter 2: Total number of timer entries, 3

628573 16191 hd hdmodeaa04ext8.c Port number too large for EAA04 (Range 0->3) 1




628577 16196 hd hdmodeaa04ext8.c Invalid LineState for EAA04 1

628578 16197 hd hdmodeaa04ext8.c Port number too large for EAA (Range 0->3) 1

628579 16198 hd hdmodeaa04ext8.c Invalid connState requested for this port 1

628583 16199 hd hdtstmemory.c FLASH EPROM failure 1

628584 16200 hd hdmfp.c MFP-test failure 1

628586 16201 hd hwiprima.c PRIMA-test failure 1

628587 16202 hd hdtstltk.c DTMF-LOOP failure 1

628588 16203 hd hdtstltk.c PCM-switch failure 1

628596 16204 hd hdresa.c an error using the chip driver has occured 1

628597 16205 hd hdsytag Function not available (if there isn't a RESA) 1

628605 16206 hd hdsync.x function is called where no chip exists 1

628619 16207 hd hddspdrv.c Unexpected DSP message received 1

628620 16208 hd hddspdrv.c Dsp wrote a msg but HSR7 bit 3 not set in response 1

628621 16209 hd hddspdrv.c DSP not ready to receive msg 1

628622 16210 hd hddspdrv.c DSP msg length incorrect 1

628623 16211 hd hwdrvmpd.c MPD received bad interrupt signal 1

628624 16212 hd hddspman.c Msg recieved by dsp manager has bad major/minor 1

628629 16213 hd hddtmfcentral.c dtmf sender requested with unavailable sender number 1

628651 16214 hd hdpcmcia.c Battery of SRAM card is empty 1

628655 16215 hd hdtstmemoryzee.c The read application size from BPB (Boot Parameter Block) in the application Flash, is bigger than the physical Flash size 1

628667 16216 hd hddtmftonetable.c dtmf tone table is asked for an unexpected sign 1

628756 16217 hd hdmpdsbc.c System base 4 must be connected to an MPD module 1

628764 16218 hd hdzfkzee.c ZFK-2 chip was synchronized 1

628765 16219 hd hwdrvmpd.c An error was detected by initialising the dsp. 1

628766 16220 hd hwdrvmpd.c Function call with an unknown state. 1

628767 16221 hd hwdrvmpd.c Sub-identification of mpd module is not defined. 1

628768 16222 hd hwdrvmpd.c Moule range is not possible. 1

628784 16223 hd hdichhscxdrv.c

ErrorId 16223 is used for any errors used in the drivers area of this file ie. interrupt bits, HW-states, unexpected HW-events etc Parameter 0: unexpected value Parameter 1:

address the value has been read from (eg. register) Parameter 2: last MajorMinor (0x0000xxxx) or ISTA & EXIR (0xff<exir>ff<ista> ) 1


ErrorId 16224 is used for any errors used in the message handling area of this file ie. format errors, MajorMinors problems, out-of-range values Parameter 0: unexpected value

Parameter 1: address the value has been read from (eg. register) Parameter 2: last MajorMinor (0x0000xxxx) or ISTA & EXIR (0xff<exir>ff<ista> ) 1


ErrorId 16225 is used for any errors used in the service functions area of this file ie. format errors, MajorMinors problems, out-of-range values etc Parameter 0: unexpected value

Parameter 1: address of the function the error has occurred in Parameter 2: enum of the type of the error. 1

628852 16226 hd hdresa.c Dect sync is switched to the wrong timeslot 1

628853 16227 hd hdresa.c Dect bitshift value is wrong 1

628865 16228 hd hdmusac.c access to MUSAC indirect register failed 1

628866 16229 hd hdmusac.c CM memory of MUSAC could not be reseted 1

628888 16230 hd hdepic.c the timeslot was in use. 1

628934 16231 hd hdqcccpmtsa.c Attempt to initialize a wrong baudrate for the V.110 protocol 1

628938 16232 hd hdqccrisccmds.c Attempt to start a nonexisting RISC timer 1

628939 16233 hd hdqccrisccmds.c Attempt to stop a nonexisting RISC timer 1

628940 16234 hd hdqccrisccmds.c Attempt to stop an already stopped RISC timer 1

628941 16235 hd hdqccrisccmds.c Attempt to start an already started RISC timer 1

628945 16236 hd hdqccrisccmds.c Attempt to initialize the RISC timer base while RISC timers are running 1

628946 16237 hd hdqccrisccmds.c RISC timer period exceeds maximum value of 63 1

628947 16238 hd hdqccrisccmds.c Attempt to start a RISC timer prior to initialize the RISC timer table 1

628948 16239 hd hdqccrisccmds.c Attempt to start a RISC timer with a to large timeout 1

628949 16240 hd hdqccrisccmds.c Attempt to start a RISC timer with a to short timeout 1

628951 16241 hd hdqcccpmv110.c RISC timer could not be started for V.110 protocol. V.110 will not work ! 1

628952 16242 hd hdqcccpmv110.c RISC timer table could not be initialized for V.110 protocol. V.110 will not work! 1

628957 16243 hd hdqcccpmv110.c unable to load V.110 Microcode into Dual Port RAM: not enough space 1

628958 16244 hd hdepic.c Comparison of the MADR register wrong. Fatal Error. 1

628959 16245 hd hdepic.c Comparison of the MAAR register wrong. Fatal Error. 1

628960 16246 hd hdepic.c comparison of the MACR register is wrong. Fatal error. 1

628981 16247 hd hdepic Port of TimeSlot out of range. Fatal Error. 1

629118 16248 hd hdepic.c Sp1 want to switch a connection from analog subscriber but the layer3 of that subscriber is idle. Could be a OWA problem. 1

629125 16249 hd hdqcccpmv110.c Stop-Bit Error during receiption of a V.110 frame (Motorola Microcode) 1

629126 16250 hd hdqcccpmv110.c A character was received and discarded due to lack of buffers on a V.110 frame. 1

629127 16251 hd hdqcccpmv110.c Invalid V.110 frame received. The character received until this error occured, are valid. 1

629129 16252 hd hddtmfsend.c function was called with wrong dtmf-number 1

629137 16253 hd hdepic.c epic access has failed due to epic internal occupation of memory 1

629138 16254 hd <empty> disabling, enabling or clearing of interrupt source which was not defined 1

629139 16255 hd hwminterruptltx.c disabling, enabling or clearing of interrupt source which was not defined 1

629140 16256 hd hwminterruptqcc.c disabling, enabling or clearing of interrupt source which was not defined 1

629144 16257 hd hdepic.c function called with parameters out of range 1

629146 16258 hd hdepic.c just some bits of pcm timeslot are active. We never use that feature, so that must be an error. 1

629147 16259 hd hdepic.c sombody tried to change a special function timeslot without disabling the function first. 1

629148 16260 hd hdepic.c sombody tried to activate the output to iom, but iom is internally looped back without any previous output to iom. 1

629150 16261 hd modadmanalog.c could not get info about iom timeslot of requested analog port 1

629151 16262 hd hdzfkzee.c No ZFK tones defined for this country. 1

629155 16263 hd hdepic.c /* unexpected write access to Iom2 timeslot */ 1

629156 16264 hd hdepic.c unexpected read of ci channel. 1

629157 16265 hd hdepic.c command-indication channel has detected a change interrupt has occured, but no function assigned to treat the change 1

629158 16266 hd hdtstmemory.c The checksum is not available. 1

629159 16267 hd hdepic.c incosistent handling of monitor fifo sendig sending 1

629160 16268 hd hdepic.c monitor queue is growing too much there seems to be a problem with sending om monitor channel 1

629161 16269 hd hdepic.c unexpected major minor received 1

629162 16270 hd hdepic.c the requested module name is not known by epic-driver 1

629167 16271 hd hdmodstmup3.c function call with parameter out of range 1

629168 16272 hd hdmodstmup3.c function called with wrong parameter 1

629169 16273 hd hdmodstmup3.c configuration of isdn port 3 is undefined 1

629170 16274 hd hdmodinitmup3.c unknown hw version detected 1

629171 16275 hd hdmodinitmup3.c unknown module in ext slot 1

629172 16276 hd hdmodexp14.c NULL pointer detected. 1

629173 16277 hd hdmodexp14.c Unknown signal major for EXP14 signal interrupt entry (mod0). 1

629174 16278 hd hdmodexp14.c Unknown signal major for EXP14 signal interrupt entry (mod1). 1

629175 16279 hd hdmodexp14.c No interrupt handler for this module. 1

629176 16280 hd hdmodexp14.c Unknown chip select for EXP14 module. 1

629177 16281 hd hdmodexp14.c Unknown module number. 1

629178 16282 hd hdmodexp14.c NULL pointer detected. 1

629179 16283 hd hdmodexp14.c Synch port is not a T-trunk-line. 1

629180 16284 hd hdv24.c invalid V24 channel 1

629181 16285 hd hdv24.c unexpected signal 1

629186 16286 hd hdmod3s1text8.c requested hardware address is not available 1

629189 16287 hd hdmodext3s1text8.c function's parameter out of range 1

629192 16288 hd hdsicofi4.c out of country range. 1

629193 16289 hd hddspdrv.c Not all expected DSPs have initialised, possible hw problem 1

629194 16290 hd hdospdrv.c Bad OSP module type 1

629195 16291 hd hdospdrv.c Interrupt process woken up with null msg 1

629198 16292 hd hdlic.c The function hdLicGetDataBlock was called with an item-type that is not supported. Check whether this type really exists in: ArLicLicenseItemsEnu if no : -> you found a bug if 1

629215 16293 hd hdsicofi.c For this country doesn't exist sicofi-coefficients. That means sits are Switzerland values. 1

629216 16294 hd hdsicofi.c This Dtmf-digit doesn't exist. 1

629217 16295 hd hdsicofi.c This attenuation-switch doesn't exist. 1

629221 16296 hd hdlic.c

the function hdLicGetDataBlock received a request to retrieve data from the license chip for a unknown (or not yet implemented) datatype. Check whether you mistyped

something in the calling function or implement the new datatype in the function hdLicGetDataBlock. Have fun Franz 1

629224 16297 hd hwicomm.c An error occured in the library interface functions (read,write) 1

629226 16298 hd modadm.c accept only one dect assignement 1

629227 16299 hd modadm.c unexpected type of interface 1

629228 16300 hd modadm.c there was already a module assigned 1

629229 16301 hd modadm assignement has exceeded the maximum port range 1

629230 16302 hd modadm.c parameter port exceeded maximum port range of interface 1

629231 16303 hd modadm.c module must be assigned first 1

629232 16304 hd modadm.c assignement of interface failed 1

629233 16305 hd modadmeset parameter primaId is out of range 1

629235 16306 hd modadmeset function parameter exceeded allowed range 1

629239 16307 hd modadmeset param eset port is out of range 1

629240 16308 hd hdmodesetmup8.c function called with wrong parameter 1

629242 16309 hd hwiprima.c error parameter : requested prima is not known 1

629243 16310 hd modadmeset.c prima is not assigned or functions are init already 1

629249 16311 hd hdqcccpmv110.c Unexpected V110Channel --> coding error, ZEE/MUP3 supports V110ChA only! 1

629250 16312 hd hdqcccpmv110.c The baud rate rxTxBaud for V110 protocol is wrong, unknown enum. Probably overwritten. 1

629251 16313 hd hdqcccpmv110.c Wrong flowcontrol value for V.110 protocol 1

629253 16314 hd hdfld.c Flash is unknown, add the device to the hardware driver table. 1

629262 16315 hd hddspdrv.c Cannot access the echo canceller database item. 1

629264 16316 hd hdmodmusic.c Unexpected parameter value to switch or read the selected device. Ignored. 1

629269 16317 hd hddspman.c The slot parameter is not correct for the board 1

629270 16318 hd hdpgpmain.c Unexpected minor for MajorMod in hdPgpMainProc received 1

629276 16319 hd hdfld.c Less data Flash found than required for this board (foundDevs, foundSize, requiredSize). 1

629279 16320 hd hdspau68360.c kdm write access has been started with higher IPL than 0 !! 1

629291 16321 hd hddspdrv.c DSP returned an error message 1

629304 16322 hd hdqcccpmv110.c During XOFF state in V.110, we had a frame lost situation. We definitely lost datas. 1

629308 16323 hd hdv24.c unsuccessfull registration 1

629311 16324 hd hdlic.c Destroy license chip, only a read access is possible 1

629343 16325 hd hddspdrv.c No response from DSP within timeout, could be a faulty DSP. 1

629349 16326 hd hddspdrv.c Checksum error, problem with DSP code conversion from binary to C. 1

629357 16327 hd hdqcccpmv110.c The V.110 transmit buffer is blocked over a too long time 1

629370 16328 hd hdqcccpm.c A spurious interrupt occured. One known source for this problem is a read access to the SSA register: V.24 Receive Register (read only, Adr 04h) 1

629433 16329 hd hdmfp.c Invalid LED enumeration 1

629510 16330 hd modadmeset.c Module has already been assigned a prima number 1

629516 16331 hd modadmisdn.c isdn port exceeded IsdnPortMax 1

629517 16332 hd modadmisdn.c undefined function pointer (NULL) 1

629518 16333 hd modadmisdn.c function call makes no sense at that type of hardware 1

629519 16334 hd modadmisdn.c configuration command not defined 1

629520 16335 hd modadmisdn.c installation problem detected 1

629521 16336 hd modadmisdn.c function pointer already defined ! 1

629566 16337 hd hdepic.cc connectIomToUp with unknown type of connection 1

629567 16338 hd hdepic.cc object HdEpicInterruptC got asked for setup unknown iom channel type 1

629581 16339 hd hdepic.cc iom2monfifo multiple timeouts started 1

629588 16340 hd hdqcccpmv110.c V.110 receive buffer was indicating an interrupt althought no datas were received. An old buffer is used, which contains wrong datas! The datas are not sent to l2Ta. 1

629612 16341 hd hwminterrupt.cc os generates interrupt, but no signal available 1

629613 16342 hd hwminterrupt.cc interrupt handler gets overwritten 1

629614 16343 hd hwminterrupt.cc given parameter module unknown 1

629619 16344 hd l1dacfadrv.c unknown primary mode to setup 1

629672 16345 hd hdzfkzee.c we have to make shure, the tones get not reset twice on a zee. Dect Sync Signal would be wrong after a second initialisation 1

629673 16346 hd hdv24uartstar.c invalid V24 configuration 1

629682 16347 hd number Wrong highway number help q quit dir ls errorid g -q -dhd hddspdrvstar.c -cWrong 1

629683 16348 hd hddspdrvstar.c Checksum of download code for DSP is wrong 1

629691 16349 hd hddectsync.c No timeslot has been assigned to this bchannel and portId 1

629692 16350 hd hddectsync.c No portreference for this portId 1

629695 16351 hd hdmiprfifo.cc internal error detected 1

629696 16352 hd hdmu iprctrl.cc process main loop unexpected signal received 1

629697 16353 hd hdmiprctrl.cc parameter fault 1

629698 16354 hd hdmiprfifo.cc parameter fault 1

629699 16355 hd hdmiprctrl.cc unexpected acknowledge received 1

629700 16356 hd hdmiprctrl.cc acknowledge pointer not within signal actually hold 1

629701 16357 hd hdmiprctrl.cc vp message received with portnumber of uninstalled driver 1

629702 16358 hd hdmiprmsg.cc consistency check failed on parameter 1

629704 16359 hd hdqcccpmv110.c The microcode revision number read from the RISC, does not match the current version for the V.110 microcode. The system is crashed! 1

629721 16360 hd hdmiprctrl.cc new mode is not known 1

629724 16361 hd hdmiprfifo.cc wring parameter passed to function 1

629725 16362 hd hdam79q021.c The wrong module was specified for an analog port 1

629726 16363 hd hdam79q021.c The codec is not responding 1

629727 16364 hd hdam79q021 The wrong state was requests ed for the slic / . 1

629728 16365 hd hdam79q021.c An invalid channel was enabled 1

629729 16366 hd hdbiostar.c An invalid bell was selecteds 1

629730 16367 hd hdbiostar An invalid door was specified 1

629731 16368 hd hdbiostar an invalid relay was specifieid 1

629732 16369 hd hdmod2abstar The wrong port was selected for ringing 1

629733 16370 hd hdmod2abstar An attempot mwas made to bring into service a port already in service 1

629734 16371 hd hdmod2abstar An out of service port was attempted to be take out of service 1

629735 16372 hd hdmodetab4 The wrong port was attempted to be rung / . 1

629740 16373 hd hdmodead.c function hdEadGetThreshold, wrong port or prima 1

629741 16374 hd hdmodead.c function hdEadSetThreshold, wrong port or prima 1

629742 16375 hd hdhdlc360.cc Could not issue a command to the risc proceassor 1

629743 16376 hd hdhdlc360 Received signal pointer == null 1

629744 16377 hd hdhdlc360 this interrupt process was in the wrong state 1

629745 16378 hd hdqcchdlcta.cc Function hdQccHdlcIrq: Error in the received HDLC frame (MBS and MBL only). Param 1: RX buffer descriptor index Param 2: RX buffer status word Param 3: RX buffer length 2

629746 16379 hd hdhdlc360 A frame was discarded because now free buffers were available 1

629747 16380 hd hdhdlc360 The received frame was not complete, it should alway be in our system 1

629748 16381 hd hdhdlc360 The transmitted frame had errors 1

629749 16382 hd hdhdlc360 parameters to hdModInitHdlc were incorrect 1

629750 16383 hd hdhdlc360 The length of the received frame was too short 1

629751 16384 hd hdhdlc360 There was a DPLL error during frame reception 1

629752 16385 hd hdhdlc360 The received frame was too long 1

629753 16386 hd hdhdlc360 An attemp was made to get the b channel from the wrong signasl type 1

629754 16387 hd <empty> An attempt was made to get the channel from the wrong signal 1

629755 16388 hd hdhdlc360 The wrong signal was received 1

629756 16389 hd hdhdlc360 An invalid b channel was requestedd 1

629757 16390 hd hdhdlc360 An attempt was made to send the wronf signal 1

629758 16391 hd modadm.cc The hdlc port value was invalid 1

629785 16392 hd hdspdrestart.cc We failed restoring the handleIdpool after reset and its even not possible to create a new one 1

629808 16393 hd hdfddflashdriver.cc In function BasicWriteBlock, write access wasn't successful 1

629809 16394 hd hdfddflashdriver.cc In function write16BitWidthToDevice, write access wasn't successful 1

629810 16395 hd hdfddflashdriver.cc In function write32BitWidthToDevice, write access wasn't successful 1

629811 16396 hd hdfddflashdriver.cc In function AtmelWriteBlock, write access wasn't successful 1

629821 16397 hd hdmodinitstar.c Unknown or Unallowed or Missing module 1

629824 16398 hd hdheatirq.c Heat-Interrupt occured. 1

629834 16399 hd hdepic.cc in case of a switching request with pcm slot already in use 1

629845 16400 hd Unknown test 1

629864 16401 hd <empty> Undefined slot or state of slot 1

629907 16402 hd hdmiprctrl.cc canot assign ip devices of more than one mipr module 1

629909 16404 hd hdmiprctrl.cc /* copy of pointer to artypdata is still in use */ 1

629916 16405 hd hddspdrvstar.c Why does the Dsp send an interrupt if we can't read or write a tribyte 1

629947 16406 hd hdmod2abstar.c Could not find the bscref associated with the current port. 1

629981 16407 hd hdtstpbx955.cc Self test found no LIC chip in the system. 2

630015 16408 hd hdfsfld.cc not possible to crate a device driver for a flash device don't konw waht realy hapened, but we cant go on with that. Stop the PBX. 1

630017 16409 hd hdfsfld.cc There was a write access to the flash device which wasn't successful.Possible reasons are that we tried to change a single bit from 0 to 1 or we have a faulty device. 1

630057 16410 hd hdmasynchbridge.cc Error Mapping HdTbxMenuEnuC to MaTbxMenuEnuC - undefined value 1

630064 16411 hd hdmasynchbridge.cc error mapping HdTraceCompEnuC to MaTraceCompEnuC 1

630068 16412 hd hdprtderivedisdnpport.cc trying to initialyse twice the same parameter 1

630071 16413 hd hdprtisdnptportc, hdprtisdnptcasportc Only PP (point-point) is a valid parameter 3

630072 16414 hd hdprtisdnptportc, hdprtisdnptcasportc Only ETSI, QSIG and V2 protocol supported 4

630073 16415 hd hdprtisdntportc.cc requested parameter not available for trunk line 1

630075 16416 hd hdfsfld.cc There is a faulty or missing device on board. 1

630077 16417 hd hdprtisdnsportc.cc combination of sapi16 partner not allowed 1

630080 16418 hd hdprtslotc.cc Unknown module on slot during module spec construction: Param 1 is the slot ID which corresponds to the socket number on the board. Param 2 is the module ID as read from 5

630083 16419 hd hdmodinitpbx955.cc could not detect the type of base plate 1

630086 16420 hd hdprtisdnportc.cc the parameter id (isdn processId) is out of range 1

630106 16421 hd hdmodisdn04st.cc //swidec of module not found or not installed 1

630107 16422 hd hdprtmodulec.cc requested index of swidec exceeds available amount of swidec 1

630112 16424 hd hdprtmodulec.cc no destination module found for this signal dedicated to an interrupt of the module 1

630113 16425 hd hdmodisdn04st.cc unexpected signal received in module interrupt 1

630123 16426 hd hdxasynchbridge.cc failed to map HdMonTestFlagEnuC to XaMonTestFlagEnuC 1

630129 16427 hd hdmodsl0408ab.cc swidec of module not found or not installed. 1

630130 16428 hd hdmodtl04ab.cc swidec of module not found or not installed. 1

630135 16429 hd hdcmpswidecc.cc This hw/ts was already in use. 1

630136 16430 hd hdcmpswidecc.cc Port A pin of SWIDEC is out of range. 1

630137 16431 hd hdcmpswidecc.cc Port B pin of SWIDEC is out of range. 1

630138 16432 hd hdcmpswidecc.cc Serial port of SWIDEC is not valid. 1

630139 16433 hd hdcmpswidecc.cc Tx collision detected. 1

630141 16434 hd hdmiprmsg.cc Unexpected NULL pointer while trying to free transmitted message. 1

630188 16435 hd hddspmanstar.c should never have more than 4 Dtmf decoders 1

630190 16436 hd hddchtx.cc signal is not handled in treatDChannelSignal() method 2

630199 16437 hd hdmodbp955smallad2.cc the function should never be called, as the signal is expected to be treated in the module handler 1

630200 16438 hd hdmodbp955smallad2.cc parameter exceeded range / 1

630201 16439 hd hdcmpprima.cc device address is unknown 1

630202 16440 hd y Ethernet driver received unrecognised signal. 1

630206 16441 hd hddchmon.cc string exceeded max len 1

630207 16442 hd hddchtx.cc wrong minor mod received 1

630208 16443 hd hdcmpisac.cc unexpected enum (treating deafult case 1

630222 16444 hd hddchhost.cc could not generate portref from absport 1

630235 16445 hd hdbio860.cc Unknown Flash module detected. Set access speed to 200ns (slowest possible) 1

630239 16446 hd hdcmpdspinfo.cc Could not send the store the signal before sending to the DSP because the outgoing fifo is full 1

630240 16447 hd hdcmpdspinfo.cc The DSP manager receive a receive ack signal from the DSP, but it contained the wrong pointer. This probably means that there is an error in the DSP SW. 1

630241 16448 hd swit/cr/pri/crdspdatac.cc An error signal was received from the DSP. This is not a good sign, and usually means that there is an error in the DSP driver SW or the DSP. See aad-0136 chapter 5.2.2 to decode 3

630242 16449 hd hdcmpdspinfo.cc The DSP manager received the reply Processing Status Msg when we never requested it. 1

630243 16450 hd hdcmpdspinfo.cc The DSP manager received a warning that the voice memory is busy, but this should never happen because the SW should only request a signal record request simultaneously 1

630244 16451 hd hdcmpdspinfo.cc The version of the DSP of firmware has been upgraded, and the DSP driver sw has not bee upgraded accordingly. 1

630245 16453 hd hdcmpdspc.cc A signal was received from the DSP which was not expected 1

630246 16454 hd swit/cr/pri/crdspman.cc

The DSP failed to respond to the last request with a receive acknowledge. Possible causes of the problem: - The DSP did not start up. Check the resources in the DSP monitor

(Menu 2/2). - The system is fully loaded and the response waiting timer is too short. - The DSP is no longer responding (crashed?). Parameter0: Indicates how many hw-reset this

dsp had Parameter1: Slot id Parameter2: DSP id on module 5

630247 16455 hd hdcmpdspc.cc The interrupt Status register for the DSP indicated there was an interrupt, but the internal HINT bit indicated there wasn't. 1

630266 16456 hd hdqcchdlcbus.cc HDLC bus driver received an unrecognised event. 1

630268 16457 hd hdqcchdlcbus.cc HDLC bus driver received data for a dead channel. 1

630270 16458 hd hdqcchdlcbus.cc Unexpected UA received. 1

630271 16459 hd hdqcchdlcbus.cc Counter N1 reached its maximum 1

630272 16460 hd hdqcchdlcbus.cc Counter N2 reached its maximum 1

630274 16461 hd hdqcchdlcbus.cc HDLC bus primary controller received nonsense. 1

630275 16462 hd hdqcchdlcbus.cc Retransmission queue corrupt. 1

630276 16463 hd hdqcchdclbus.cc Ooops, no frame! 1

630277 16464 hd hdqcchdlcbus.cc Unhandled timer expiry. 1

630278 16465 hd hdqcchdlcbus.cc Channel failed to register. 1

630394 16466 hd hddchmph.cc could not translate smAbsPort to isdn port 1

630395 16467 hd hdmodoi2door.cc 1

630407 16468 hd hdprtbaseplatec.cc An unknown port was found on the device 1

630408 16469 hd hdprtbaseplatec.cc An unknown device was found on the baseplate 1

630428 16470 hd hdqccethernet.cc Out of Fusion buffers! 1

630445 16471 hd hdqcchdlcbus.cc Inve Invalid devId 1

630446 16472 hd hdqcchdlcbus.cc Short Frame recevied. 1

630461 16473 hd hdmodbp955smallanalog.cc Music port wasn't switched. 1

630462 16474 hd hdqcchdlcbus.cc Received an acknowledgement for a frame we haven't sent. P1 = N(R), P2 = last N(R) received, P3 = send state variable V(S) 1

630472 16475 hd hdcmpipr.cc a message shall be transmitted where contents do not match range 1

630473 16476 hd hdcmpipr.cc still data to be sent, not able to send multible buffers 1

630476 16477 hd hdcmpiprctrl.cc bad aligned VP message received from IPR-Fifo 1

630477 16478 hd hdcmpiprctrl.cc could not find portadmin of ip router port 1

630486 16479 hd hdqcchdlcbus.cc Empty frame recieved. 1

630489 16480 hd hdcmpdspinfo.cc Could not find a conference channel 1

630493 16481 hd hdmodvoicemail.cc The swidec could not be configured correctly on the voicemail module 1

630494 16482 hd hdprtvoicemailportc.cc Setting the port state or ringing control on the Swidec was not possible. Parameter 1: port state (R8 and later) Parameter 2: 0 Parameter 3: 0 3

630496 16483 hd hdcmpdspman.cc The tone switching to the physical highway did not complete 1

630497 16484 hd hdcmpdspinfo.cc Could not activate some DSP resources 1

630498 16485 hd hdcmpdspinfo.cc Could not perform DSP system initialisation 1

630499 16486 hd hdcmpdspinfo.cc Could not perform DSP tone initialisation 1

630500 16487 hd hdcmpdspinfo.cc Could not perform required homologation switch 1

630501 16488 hd hdqccethernet.cc Transmit overflow. 1

630503 16489 hd hdlic.cc failed to write feature block to licence chip 1

630519 16490 hd hdcmpdspinfo.cc the data base is corrupted 1

630521 16491 hd l2prxl.cc PRIMA not present. 1

630527 16492 hd hdqcccpmtsa.cc Attemt to use the TSA to transmit and receive HDLC frames from different highways 1

630532 16493 hd hdv24config.cc Wrong Baudrate requested 1

630533 16494 hd hdv24config.cc Wrong V24 Channel requested 1

630534 16495 hd hdv24config.cc Wrong V24 Bit Format requested 1

630535 16496 hd hdv24config.cc Wrong V24 Parity requested 1

630536 16497 hd hdv24config.cc Wrong V24 Number of Stop Bits requested 1

630537 16498 hd hdv24config.cc V24 Config Object not found 1

630540 16499 hd hdintbattery.cc battery alarm --> pbx is powered by battery 1

630541 16500 hd hdintbattery.cc power supply alarm --> pbx is powered by power supply 1

630542 16501 hd hdintnattery.cc unknown signal minor 1

630543 16502 hd hdintbattery.cc unknown signal major 1

630611 16503 hd hdrtcv3021.cc rtc reads unknown date/time 1

630613 16504 hd hdqccethernet.cc Transmit failed because the TxBD pool was full. 1

630618 16505 hd hdcmpflash.cc Erase sector started. Can't lock a sector in this state 1

630619 16506 hd hdad2ctrl.cc unknown signal received. 1

630647 16507 hd hdqccethernet.cc Receive failed because the RxBD pool was full. 1

630648 16508 hd hdqccethernet.cc Transmit Error 1

630649 16509 hd hdqccethernet.cc Ethernet transmitter restarted 1

630655 16510 hd hdqccethernet.cc BSY monitoring re-enabled 1

630682 16511 hd hdcmpflash.cc Tried to read from flash in erase state, but pause worked and flash returned to good state. 1

630685 16512 hd hdqcchdlcta.cc Received an QUICC_HDLC_TX interrupt when not expecting it. 1

630704 16513 hd hdmodbp955smallad2.cc connection manipulation for system base, but corded terminals expected 1

630705 16514 hd hdmodbp955smallad2.cc connection manipulation for corded terminal,but system base expected 1

630711 16515 hd hdprtcourtesyportc.cc Attempted to play courtesy when resource already allocated. 1

630712 16516 hd hdprtcourtesyportc.cc Attempted to stop courtesy play with invalid resource id 1

630713 16517 hd hdprtcourtesyportc.cc Failed to connected courtesy play 1

630714 16518 hd hdprtcourtesyportc.cc Failed to allocate courtesy play 1

630715 16519 hd hdprtcourtesyportc.cc Failed to disconnect courtesy play 1

630716 16520 hd hdprtcourtesyportc.cc Failed to deallocate courtesy play 1

630717 16521 hd hdprtcourtesyportc.cc Attempted to start courtesy recording with already allocated resource 1

630718 16522 hd hdprtcourtesyportc.cc Failed to connect courtesy record 1

630719 16523 hd hdprtcourtesyportc.cc Failed to allocate courtesy record 1

630720 16524 hd hdprtcourtesyportc.cc Attempted to stop courtesy recording with invalid resource 1

630721 16525 hd hdprtcourtesyportc.cc Failed to disconnect courtesy record 1

630722 16526 hd hdprtcourtesyportc.cc Failed to deallocate courtesy record 1

630723 16527 hd hdprtcourtesyportc.cc attempting to delete courtesy message with already allocated resource 1

630724 16528 hd hdprtcourtesyportc.cc Failed to connect courtesy delete 1

630725 16529 hd hdprtcourtesyportc.cc Failed to allocate courtesy delet 1

630726 16530 hd hdprtcourtesyportc.cc Falied to deallocate courtesy delete 1

630727 16531 hd hdcmpdspinfo.cc Output descriptor changed for reconnected DSP resource 1

630730 16534 hd hdqccethernet.cc Transmitter overloaded, packet deleted. P1 = txNextNum, P2 = txNextFreeNum, P3 = N/A 1

630733 16535 hd hdcmpdspinfo.cc Error given from DSP, same error as 16448 1

630744 16536 hd hdcmpdspinfo.cc The DSP was reconnected 1

630745 16537 hd hdcmpdspinfo.cc At least one of the timeslots given to the DSP is invalid 1

630757 16539 hd hdocmocwactivestc.cc Over current warning (OCW) active. The 40V port power supply has reached the limit. 1

630758 16540 hd hdocmocdactivestc.cc Over current disconnect (OCD) active. The 40V port power supply is overloaded, ports will be switched off. 1

630768 16541 hd hdcmpad2ipctrl.cc The module index doesn't match. 1

630769 16542 hd hdcmpad2ipctrl.cc consistency check failed on parameter. 1

630770 16543 hd hdcmpad2ipctrl.cc Unknown message received by fifo. 1

630771 16544 hd hdcmpad2ipctrl.cc No device found for this ipr port. 1

630772 16545 hd hdcmpad2ipctrl.cc Unknown minor is sent by fifo. 1

630773 16546 hd hdcmpisaxsx.cc unexpected interrupt in ista 1

630776 16547 hd hdcmpisacsx.cc unused method in class 1

630777 16548 hd hdcmpisacsx.cc undefined timer name 1

630781 16549 hd hdmodsl0408ab.cc Unknown major/minor in signal. Param 1: Signal id Param 2: 0 Param 3: 0 3

630782 16550 hd hdcmpsidecc.cc Unknown minor in this case. 1

630786 16551 hd hdcmpswidecc.cc Analogue hardware module out of order. The serial interface between SWIDEC and QSLhis module don't work anymore. 1

630791 16552 hd hdcmpisacsx.cc parameter error 1

630794 16553 hd hdqcchdlcbus.cc N(S) already in re-transmit list. P1 = N(S), P2 = last N(R) receieved, P3 = V(S) 1

630795 16554 hd hdcmpad2ipctrl.cc Unknown MajorMinor. 1

630798 16555 hd hdcmpad2ipctrl.cc AD2IP module restarts/resets. 1

630800 16556 hd hdmiimonitor.cc Unexpected signal received. 1

630958 16557 hd hdcmpiprdetect.cc AIP/AD2IP module detection failed - no announcement frame received 1

630959 16558 hd hdcmpaip6500ctrl.cc

The AIP6500 module is blocked. Downstream (PBX to AIP) buffer contains 100 elements. Further data are thrown away. The data may be control data during normal operation or

software download data. Param 1: AIP6500 module index, starting at 0 for first AIP6500 Param 2: 0 Param 3: 0 2

630960 16559 hd hdcmpad2ipctrl.cc Ad2Ip module is too slow. Downstream buffer contains 100 elements. Further Ad2Ip data are thrown away. 1

631000 16560 hd hdmodsl0408ab.cc invalid index of qslac received. Param 1: index value Param 2: 0 Param 3: 0 2

631015 16561 hd hdcmpiprctrl.cc AIP module resets/restarts 1

631034 16562 hd hdmodtl04ab.cc Unknown major/minor in this case. 1

631035 16563 hd hdmodio2door.cc Unknown major/minor in this case. 1

631109 16564 hd hdcmpisacsx.c Invalid port type. 1

631110 16565 hd hdethlink.cc IP address conflict. Someone else is using the same IP address. 1

631128 16566 hd hdmodinitstar.c Invalid hw extension slot. 1

631151 16567 hd hdmodesst.c No isac address available for the specified module. 1

631152 16568 hd hdcmpisaccommon.c Port exceeded range of isdn ports. 1

631153 16569 hd l1dmph.c Specified port exceeded range of ISDN ports. 1

631154 16570 hd l1dmpwr.c Specified port exceeds range of ISDN ports. 1

631156 16571 hd hdcmpisacsx.c Port exceeded range of ISDN ports. 1

631158 16572 hd l1dhscxdrv.c Port exceeded range of Isdn ports. 1

631159 16573 hd l1drx.c Port exceeded range of Isdn ports. 1

631160 16574 hd l1dtx.c Port exceeded range of Isdn ports. 1

631161 16575 hd l1dcom.c Port exceeded range of Isdn ports. 1

631164 16576 hd hdmodesst.c Unknown interrupt source. 1

631173 16577 hd modadm.c Iom2 port or iom2 frame out of range. 1

631178 16578 hd hdmodetab4.c Range of Etab modules exceeded. 1

631222 16579 hd hdsfd.c erase block failure. 1

631249 16580 hd hdsfd.c serial flash device: badblock replaced. 1

631260 16581 hd hddspcourtesy.cc The end address is higher than the highest stop address 1

631270 16582 hd hdsfd.c serial flash - unknown device id 1

631271 16583 hd hdsfd.c serial flash - device initialization failed 1

631272 16584 hd hdsfd.c serial flash - allocation of memory block failed 1

631273 16585 hd hdsfd.c serial flash - no free block for replacement available 1

631274 16586 hd hdsfd.c serial flash - bad first block 1

631275 16587 hd hdsfd.c serial flash - no bad block table available 1

631276 16588 hd hdsfd.c serial flash - not able to create badblock table 1

631277 16589 hd hdsfd.c serial flash - check of badblock table failed 1

631278 16590 hd hdsfd.c serial flash - problem during read operation 1

631279 16591 hd hdsfd.c serial flash - crc check failed on read operation 1

631280 16592 hd hdsfd.c serial flash - problem during write operation 1

631281 16593 hd hdsfd.c serial flash - problem during write operation to spare area 1

631282 16594 hd hdsfd.c serial flash - error check of written data failed 1

631283 16595 hd hdsfd.c serial flash - crc check failed on write operation 1

631284 16596 hd hdsfd.c serial flash - erase operation failed 1

631285 16597 hd hdsfd.c serial flash - not able to replace bad block 1

631286 16598 hd hdsfd.c serial flash - undefined error 1

631288 16599 hd hwminterrupt331.c getting interrupt-process for unknown module 1

632839 16600 hd hdqccethermon.cc Unexpected signal 1

634258 16601 hd modadm.c unknown owner of IOMFrame 1

634696 16602 hd hdqccwaveplayerirq.cc Was not able to issue RISC command. 1

634697 16603 hd hdqccwaveplayerirq.cc Transmission error during wave file playback. 1

635864 16604 hd hdqccwaveplayerirq.cc Databuffer input queue overflow 1

635867 16605 hd hdqccwaveplayerirq.cc Attempt to retreive data buffer from empty input queue 1

635868 16606 hd hdqccwaveplayerirq.cc Input queue overflow 1

642214 16607 hd hdcmpflash.cc Sector erase failed param0: 1:erase failed - try a 2nd time; 2:erase failed also the 2nd time; param1: sector number 1

643680 16608 hd hdethlink.cc Unexpected signal 1

648237 16609 hd hdcmpflashdriverlowlevel.cc was not able to erase sector 0 of the flash device even after 5 retries because the sector erase timeout expired. 1

648238 16610 hd hdcmpflashdriverlowlevel.cc erasing the sector failed although the chip reported no error. Checking if all cells of this sector are '1' after erase has finished is failed. 1

648258 16611 hd hdcmpflashdriverlowlevel.cc Attempt to change a bit from 0 to 1 in Flash. This is NOT possible! 1

650203 16612 hd hdv24.cc presented rx buffer was NULL. allocate a new one... This might happen some times but if it happens often, then this is a memory leak 1

652674 16613 hd hdbio860.cc

A high load situation is detected. The hardware watchdog feed is no more possible. The interrupt of ethernet port is temporarily disabled. high load on the MBL ethernet port: If

more than 100 frames per 17ms is received (about 6000 frames per sec), we have a highload situation on the ethernet interface (read more information in the analysis section of

br25520). explaination: The errorlog 16613 indicates that a protection mechanism has been activated to prevent the system against a crash. In earlier software releases (i6mr,

i6sat), without this protection, we had crashes of the MBL system whenever there was high traffic on the ethernet port. what happened: high load on the ethernet port

generates lot of interrupts of the fcc-controller. In the error case, the fcc interrupt kept running to treat all the received frames but nothing else in the system was able to run

anymore, including the hardware watchdog. The heardware watchdog finally killed the system after at least 1 second. analysis: High load situations on ethernet may occure. You

remember probably the situations where all PBX's on test lan have been blocked due to ARP request high load. From the field we received crashlogs where i6mr kept crashing

cyclic fo 4 minutes due to high load on eth interface. It is clear that the system needs to survive such loads without a crash and without blocking. protection: Whenever the

hardware watchdog reaches a limit on its time window, the eth receiver is disabled. Two seconds later the receiver is enabled again. The errorlog 16613 is indicated to report the

protection activation. Why disabling for 2 seconds? This is an experimental value. One second is not long enough as high load on the eth interface generates high data load in the IP 4

653071 16614 hd hdethlink.cc Unknown timeout received from inet-stack 1

656325 16615 hd hdcmpflash.cc hdCmpUnlockSector() was called on a device with no locks. 1

656326 16616 hd hdcmpflash.cc hdCmpUnlockSector() detected inconsistent lock counts for a device. 1

656585 16617 hd hdcmpdspc.cc No VoP functionality available on this DSP. 1

659152 16618 hd hdprth2minitc.cc could not allocate free h2m slot for: slotId, deviceId, devPortId (not enough resources on h2m-highway 1

659154 16619 hd hdprth2minitc.cc unknown port port type (not implemented) 1

662256 16620 hd hdprtportc.cc Disconnect/Connect 2 way is not implemented for this port type. p1: myAbsPortId p2: inBchannel p3: myPortType (HdAllPortTypeC) 2

662294 16621 hd hdwplwavfilewriterc.cc Spi data are sent too early or we can't write anymore data to the wav file. 1

662386 16622 hd hdwplwavfilereaderc.cc

AudioPlayer: Format of the wave file is wrong. 1.Parameter should be 0x06 (G711a) or 0x83 (G729a). 2.Parameter should be 1 (Mono). 3.Parameter should be 0x1f40 which is

8000 (Sample Rate). Other defined values for parameter 1 0 (0x0000) Unknown 1 (0x0001) PCM/uncompressed 2 (0x0002) Microsoft ADPCM 6 (0x0006) ITU G.711 a-law 7

(0x0007) ITU G.711 �-law 17 (0x0011) IMA ADPCM 20 (0x0016) ITU G.723 ADPCM (Yamaha) 49 (0x0031) GSM 6.10 64 (0x0040) ITU G.721 ADPCM 80 (0x0050) MPEG 2

662387 16623 hd hdwplwavfilereaderc.cc AudioPlayer: Wave file contains too little audio data or no data chunk or the format chunk is missing. 3.Parameter = 1:format chunk missing. = 2:data chunk missing. = 6:file 4

662516 16624 hd hdwplwavfilewriterc.cc Problem with file system. We can't write no or not all data into the wave file! 1

663648 16625 hd hdfcc8260.cc No microcode patch available for CPU errata CPM119 for this silicon revision Parameter 1: Silicon revision of unsupported CPU 2

663649 16626 hd hdfcc8260.cc Loading the microcode patch for CPU errata CPM119 failed Parameter 1: Silicon revision of CPU 2

664194 16627 hd hdmodbp957c.cc Unknown interrupt. 1

664517 16628 hd hdprtanalogsubscriberc.cc

This ErrorId is for several error reports in this module. Parameter 3 shows the location. Param 3: 1 = This module type is unknown. Param 1 = Module type id. Param 2 = 0.

2 = This mode is unknown or the SLIC type doesn't fit. Param 1 = Mode. Param 2 = SLIC type. 3 = This mode (previous) is unknown. Param 1 = Mode. Param 2 = 0. 4 =

This mode (new) is unknown. Param 1 = Mode. Param 2 = 0. 5 = Port is not in General Bell mode ==> Don't do running on this port. Param 1 = Mode. Param 2 = Ringing

state. 7 = Set port state: State id is out of range. Param 1 = State. Param 2 = Unconditional and Lockout boolean. 8 = Set port state: This state is unknown. Param 1 =

Current state. Param 2 = Requested state which is unknown. 9 = Set port state: Requested state is not valid in the current mode. Param1 = Port in service and mode boolean.

Param2 = Current state and requested state boolean. 10= Switch relay: Port in relay output mode. Param 1 = Current mode. Param 2 = Requested relay state. 11= Connect

two way: Wrong port mode. Param 1 = Current mode. 12= Disconnect two way: Wrong port mode. Param 1 = Current mode. 14= Send FSK data: A new FSK transmission

starts and the last one is running. Param 1 = Duration (ms) since the last FSK transmission was started. Param 2 = Current FSK position and sending FSK size. 15= Send FSK

data: Current FSK position is larger then sending FSK size. Param 1 = Duration (ms) since the last FSK transmission was started. Param 2 = Current FSK position and sending

FSK size. 16= Send FSK data: Current FSK position is larger then sending FSK size. Param 1 = FSK buffer pointer address. Param 2 = Current FSK position and sending FSK size. 18

664594 16629 hd hdmontbxhw.cc The user made a system new start in the wiring adapter setting monitor. 1

664615 16630 hd hdmodisdnsxpbx957.cc Unexpected 'device' found in module specification when creating an A300 ISDN module (CTOR HdModIsdnSxPbx957C) 1

664616 16631 hd hdmodisdnsxpbx957.cc Unexpected signal received in module interrupt handler: HdModIsdnSxPbx957C::serviceInterrupts() 1

664617 16632 hd hdmodisdnsxpbx957.cc In function 'getNextIsacId()': The 'inIsacId' is out of range. Either a new A300 module with more than 4 ISACs was developped or it is simply a software bug. 1

664756 16633 hd hdmodbp957analogc.cc Different errors in this module. The third parameter numbers the error locations. 2

664760 16634 hd hdmodsl0408ab.cc Unknown device type found in module spec. Params: 1: device id, 2: device index, 3: 0. 2

664827 16635 hd hdcmpqslaccontrolc.cc Constructor called with unsupported module type. Parameter 1: The module type. Parameter 2: 0, Parameter 3: 0. 2

664831 16636 hd Module drivers Just for A300/A150: The wiring adapter doesn't match to the module type on this slot. This Error Id generates the alarm "WrongOrMissingWiringAdapter". 2

665075 16637 hd hdcmpsilabs3050controlc.cc Command with invalid format sent to Si3050 interface class. Parameter 1 is the line number (1..4 is valid), Parameter 2 is the length of the data and 3 is the length of the answer. 1

665213 16638 hd hdmodtic4abc.cc swidec of module not found or not installed. Parameter 1 is the uncasted swidec pointer. 1

665214 16639 hd hdmodtic4abc.cc Unknown major/minor received in HdModTic4abC. Param 1 is the sig ID. 1

665462 16640 hd hdmodead.cc No DSP interrupt handler for this module. 1

665599 16641 hd hdprtmodulec.cc

You tried to instantiate HdPrtModuleC with an unsupported module type in the module specification. The serial interface to analogue devices is integrated under the swidec base

class. Here the right serial interface class has to be selected. The first parameter gives the module type. 1

666008 16642 hd hdcmpdspc.cc Unable to upload DSP firmware. DSP has been disabled. Param1: Slot, Param2: DSP ID 1

666130 16643 hd hdmodtic4abc.cc Attenuation value out of range. Param 1 is attenuation. 1

666169 16644 hd hdmodtic4abc.cc

Si3050 Frame Detect Interrupt ocurred. This means the link between Si3050 and its line interface chip Si3019 has a frame lock problem. Such a problem does not affect or depend

from the highway synchronisation. Param 1 is the module class pointer, Param 2 the port index, Param 3 the content of the Si3050 interrupt source register. The problem is

reported only once per system startup. 2

666192 16645 hd hdmodtic4abc.cc Si3050 device class of port not found. Parameter 1 is the uncasted device pointer. 1

666279 16646 hd hdprtdevicec.cc The virtual base method HdPrtDeviceC::dumpNextRegister() has been called. This should never happen. Only overloaded methods should be called. 1

666415 16647 hd hdmodeaab2c.cc swidec of module not found or not installed. Parameter 1 is the uncasted swidec pointer. 1

666416 16648 hd hdmodeaab2c.cc Unknown major/minor received in HdModTic4abC. Param 1 is the sig ID. 1

666417 16649 hd hdmodeaab2c.cc The pointer to the port's Qslac in Eaab2TlPortC is NULL or has not the correct type. Param 1 is the uncasted pointer value. 2

666914 16650 hd hdrtcm41t00.cc / hdrtcds1377.cc Attempt to set invalid date or invalid time to the RTC. Params are y/m/d or h/m/s. 2

666917 16651 hd hdrtcm41t00.cc / hdrtcds1377.cc Read invalid date or time from RTC. Params are y/m/d or h/m/s. 2

668735 16652 hd hdlic.cc unused 2

668736 16653 hd hdlic.cc failed to upgrade the EIM base block swGeneration 1

669013 16654 hd hdmododabc.cc Unsupported device type in module specification. The first parameter is the device type. 1

669014 16655 hd hdmododabc.cc Unsupported port type in module specification. The first parameter is the port type. 1

669015 16656 hd hdmododabc.cc Unsupported jumper configuration on ODAB module. The first parameter are the four configuration bits in the range 0000b..1111b. 1

669280 16657 hd hdmododabc.cc Unsupported signal sent to ODAB module driver. 1

669385 16658 hd hdheaheatmgrc.cc

Error or Warning because the oscillator tuning doesn't work (correctly). 0) Error case: The temperatur-sensor can't be read or/and no quarz tuning value can't be set. ==>

Oscillator probably runs with hardware reset quarz tuning value. The DSP interface doesn't work. 1) Error case: No quarz tuning value couldn't be found. Perhaps there is no

oscillator tuning block in the parallel flash. 2) Warning case: Perhaps it's really so that the fixed frequency oscillator is running. ==> No quarz tuning! 7

670083 16659 hd

hdheaheatmgr hdmoda400cpu2

hdpsucontrolp

For A300: Overheat alarm is generated if the temperature is too high in the PBX: - p1 is 1 - p2 is temperature For A400/CPU2: - Overheat alarm is generated if the

temperature is too high on CPU2 - Overheat alarm is generated if the temperature is too high on FXS or FXO For A470 the parameters are: - p1 : card number - p2 :

temperature As we reuse the overheat alarm on A400, the same errorid is used in three files: - hdbiopbx957.cc - hdmoda400cpu2c.cc - hdpsucontrolprocc.cc 11

670084 16660 hd hdbiopbx957.cc / Just for A300: Fan stopped alarm is generated if the fan doesn't run. For the A470: the same errorid has been reused to trigger the alarm. The errorReport with severity alarm is 6

670290 16661 hd hdcmppgpmain.cc Unknown Minor for timeout for Hd Pgp main process received. Major was MajorDsp. 1

670455 16662 hd hdmodeaab2c.cc Just for EAAB2 module: Failed to allocate simple connection resource or failed to do a simple connection. Analogue trunk has no or one way connection on EAAB2 module. 2

671361 16663 hd hdprtslotc.cc Unknown module on slot during module class construction: Param 1 is the slot id which corresponds to the socket number on the board. Param 2 is the module enum value from 1

672404 16664 hd hdrtcm41t00.cc / hdrtcds1377.cc Reading RTC data has failed or a transmission retry happened. Param 1 is 1 to indicate failure, else 0. Param 2 is the retry count, with a value of 1 for normal operation. Param 3 2

672405 16665 hd hdrtcm41t00.cc / hdrtcds1377.cc Writing RTC data has failed or a transmission retry happened. Param 1 is 1 to indicate failure, else 0. Param 2 is the retry count, with a value of 1 for normal operation. Param 3 is 3

672407 16666 hd hdrtcm41t00.cc / hdrtcds1377.cc Activated oscillator fail status flag detected while reading the RTC chip M41T00 or DS1377(on A400). Time and date are expected to be invalid now. Params: hour, minute, second. 3

672416 16667 hd hdrtcm41t00.cc / hdrtcds1377.cc

RTC time lost while system was off and RTC ran from supercap. Param 1: 1: Oscillator failed flag set, 0: flag cleared. Param 2: 1: Initial RTC power up (RTC power was interrupted),

0: RTC had power without an interruption. Param 3: 1: Date and time are (partly) invalid, 0: Date and time are valid. DS1377 on A400: Param 1: 1: 0 Param 2: 1: Initial RTC power

up (RTC power was interrupted), 0: RTC had power without an interruption. Param 3: 1: Date and time are (partly) invalid, 0: Date and time are valid. 2

672449 16668 hd hdrtcm41t00.cc / hdrtcds1377.cc Invalid raw data while reading the RTC time. The parameters are three bytes encoding seconds, minutes, and hours. 3

672451 16669 hd hdrtcm41t00.cc / hdrtcds1377.cc Invalid raw data while reading the RTC date. The parameters are three bytes encoding day, month, and year. 4

672471 16670 hd hdbchcom.cc HdBchComC::sendBChSig() is the central method to send signals to other processes who need to communicate with the ISAC-SX's HDLC handling IRQ. This error-report means 1

672472 16671 hd hdbchrx.cc HdBchComC::receiveB() Overflow in the receive buffer --> we have lost data now! 1

672473 16672 hd hdcmpisacsx.cc HdCmpIsacSxC::treatBChSignal() this is the main signal handler for the BCH Hdlc IRQ. The state machine is in an invalid state. Probably memory was overwritten or someone 1

672478 16673 hd hdcmpisacsx.cc HdCmpIsacSxC::treatSignalStateIdle() the HDLC IRQ signal handler only treats 'MajorHdlcTa' A signal with an unknown Major was received --> who sent this and why? 1

672479 16674 hd hdcmpisacsx.cc HdCmpIsacSxC::treatSignalStateIdle() In state idle the only acceptable signal minor is 'HdlcTaHdConnectReq' Receiving any other HDLC signal minor is a bug in the state 1

672480 16675 hd hdcmpisacsx.cc HdCmpIsacSxC::treatSignalStateActive() this is the BCH HDLC IRQ signal handler. Only signals with 'MajorHdlcTa' are acceptable. Receiving an other signal is a bug. 1

672481 16676 hd hdcmpisacsx.cc HdCmpIsacSxC::treatSignalStateActive() the only acceptable signal minors in this state are 'HdlcTaHdDataReq' and 'HdlcTaHdReleaseReq' Receiving any other signal minor is a 1

672482 16677 hd hdcmpisacsx.cc HdCmpIsacSxLttC::hwCmdB() An unknown command was issued to this method. Most likely, someone extended BchHdlcCmdEnu without updating this method --> it's a bug fix 1

672483 16678 hd hdcmpisacsx.cc HdCmpIsacSxLtsC::hwCmdB() An unknown command was issued to this method. Most likely, someone extended BchHdlcCmdEnu without updating this method --> it's a bug fix 1

672889 16679 hd hdethswitchc.cc Timeout in communication on the MII bus. The access to the ethernet switches is affected in that case. Param 1 is: 0: Read access, 1: Write access. 1

682870 16680 hd hdwplwaveplayerproc.cc No wave file reader (player) available. 1

682871 16681 hd hdwplwaveplayerproc.cc There shouldn't be available a wave file player/recorder. 1

682872 16682 hd hdwplwavfilereaderc.cc Wave file player: No file name or the file can't be opened. 3

685724 16683 hd hdcmpflashdriverlowlevel.cc

The parallel flash device is not empty, i.e not all cells are 0xff i5..i7.x: Parameter 1: device Parameter 2: offset from device startaddress Parameter 3: value at offending address

R8 and later: Parameter 1: Device address Parameter 2: Number of unerased 32 bit words Parameter 3: Bit pattern in the unerased words 4

685725 16684 hd hdcmpflashdriverlowlevel.cc sector is not empty, i.e not all cells are 0xff Parameter 1: sector Parameter 2: offset from sector startaddress Parameter 3: value at offending address 1

686203 16685 hd hdbio860.cc The function hdBioGetSdramMagicWord() returned FALSE, i.e there is a problem with the SDRAM module on MBS/MBL. Parameter 1: heapextension id 1

686317 16686 hd hdcmpflashdriverlowlevel.cc The sector blank check after erasing a flash sector found unerased values. Parameter 1: Sector address, 2: Number of unerased UInt32 words, 3: pattern of all words in the sector, 1

686318 16687 hd hdcmpflashdriverlowlevel.cc Flash sector erase failed. After 5 retries still had a problem. Parameter 1: Sector address, 2: Sector number (beginning at 0), 3: retry counter 1

686325 16688 hd hdcmpflashdriverlowlevel.cc After end of the erase wait phase the values being read from the flash chip are still changing. Typically status register values like 0x0018 or 0x005c can be read then. Parameter 1: 1


During the erase wait phase polling of the status register is expected to take some time clearly above zero. Counting these polling reads has shown very low values. Parameter 1:

Bit pattern of the status register, cumulated with OR-operation, ignoring pure 0xffff values, Parameter 2: polling count on flash chip 0, Parameter 3: polling count on flash

chip 1. 3


During the erase wait phase polling of the status register is expected to terminate within a certain time. The polling has been stopped with a timeout. Parameter 1: Bit pattern of

the status register, Parameter 2: polling count on flash chip 0, Parameter 3: polling count on flash chip 1. 1

688043 16691 hd hdintmodules.cc This should never happen!...this signal pointer should never be NULL. The following errorReport was introduced to track br33359, respectively to see that it happened. p1: 2

688352 16692 hd hdcmpdspc.cc Congestion tone detector: DSP reported overflow in arctangent routine. 1

688917 16693 hd hdcmpflashdriverlowlevel.cc The parallel flash sector address is out of bounds. Params: 1: Error location 2: Sector address 3: Sector count 1

690539 16694 hd hdprtmodulespec.cc Wrong board type in module spec. Param 1: MainBoardVersionEnum, Param 2: 0, Param 3: Error location. 1

690741 16695 hd hdprth2minitc.cc The fixed H2M hw/ts for the dect synchronization is already occupied. A dect synchronisation may not be possible. p1: dect synchronization highway p2: dect synchronization 1

690742 16696 hd hdprth2minitc.cc Could not reserve the dect sync timeslot. A dect synchronisation may not be possible. p1: dect synchronization highway p2: dect synchronization timeslot p3: not used 1

692890 16697 hd hdcmpdspc.cc Congestion tone detector: Attempt to start congestion tone detector for an unknown country. 1

692891 16698 hd hdcmpdspc.cc Congestion tone detector: Unknown event. Parameter 1: Event value. 1

693333 16699 hd hdcmpdspaccessc.cc Application Loading Interface (ALI) contents a too large most/least significant word of base word address of partition to transfer address. Or Application Loading Interface (ALI) 2

694074 16700 hd hdwplwavfilereaderc.cc Wave Player: No audio data or an error is noted for the wave file stream. Parameters: 1. How much bytes read. 2. -. 3. =1 wave player not started, =2 wave player was running, =3 3

694082 16701 hd hdwplwavfilereaderc.cc Wave Player: No audio data and/or an error is noted for myWaveFile and/or no data buffer. Paramters: 1. port ref. 2. channel. 3. -. 3

694106 16702 hd hdwplwavfilereaderc.cc Wave file header is wrong. Wave file is renamed to illegal. This errror report appears twice back-to-back. First error report: Parameters: 1. port ref. 2. channel. 3. first part of the 3

698279 16703 hd hdcmpqslactc.cc This array index is out of range of the OurQslacGxGrCoeff array. No other QSLAC coefficients are loaded. This code is no more used after i7.7 step 33. 2

700136 16704 hd hdcmphwaccess.cc Missing device address definition for this module type. Param 1: Slot Param 2: Module ID code (HdAllModuleIDEnum::Values) Param 3: 0 1

701496 16705 hd hdmodanalogvoiceportc.cc Unknown device type found in module spec. Params: 1: device id, 2: device index, 3: 0. 1

701499 16706 hd hdmodanalogvoiceportc.cc swidec of module not found or not installed. 1

701500 16707 hd hdmodanalogvoiceportc.cc invalid index of qslac received. Param 1: index value Param 2: 0 Param 3: 0 1

701503 16708 hd hdmodanalogvoiceportc.cc Unknown major/minor in signal. Param 1: Signal id Param 2: 0 Param 3: 0 1

701613 16709 hd hdprtanalogportc.cc Analogue port number range overflow. 1

701633 16710 hd hdprtanalogtportc.cc Analogue port number range overflow. 1

701634 16711 hd hdprtanalogsportc.cc Analogue port number range overflow. 1

702693 16712 hd hdcmpqslacc.cc Protocol check for QSLAC and VoicePort data failed. Param 1 & 2: Debugging data Param 3: Error case If this makes no sense at all try having a look at error 16722! 2

703853 16713 hd hdbio860.cc

The calculated SDRAM parameter do not match the current settings for SDRAM. This may lead to timing problems with SDRAM access. The following Parameters are the calculated

values, compare with settings in osinialphaXXX.s Parameter 1 = Reg. OR1, Parameter 2 = Reg. PSDMR, Parameter 3 = Reg. PSRT The incorrect values are adapted by the

application automatically at runtime The problem (wrong values) is in the boot software and is corrected with br38355: Wrong init/operating parameters for 64/128MB SDRAM 3

704897 16714 hd hdcmpfalc56v22c.cc Method: HdCmpFalc56V22C::hwCmdB() this is a bug! most likely someone extend BchHdlcCmdEnu without updating this method. 1

704898 16715 hd hdcmpfalc56v22c.cc Method: HdCmpFalc56V22C::treatBChSignal() The state machine is in an invalid state. Probably memory was overwritten or someone changed code without updating the 1

704899 16716 hd hdcmpfalc56v22c.cc Method: HdCmpFalc56V22C::treatSignalStateIdle() The HDLC IRQ signal handler only treats 'MajorHdlcTa' A signal with an unknown Major was received --> who sent this and 1

704900 16717 hd hdcmpfalc56v22c.cc Method: HdCmpFalc56V22C::treatSignalStateIdle() In state idle the only acceptable signal minor is 'HdlcTaHdConnectReq' Receiving any other HDLC signal minor is a bug in the 1

704901 16718 hd hdcmpfalc56v22c.cc Method: HdCmpFalc56V22C::treatSignalStateActive() this is the BCH HDLC IRQ signal handler. Only signals with major'MajorHdlcTa' are acceptable. Receiving an other signal is 1

704902 16719 hd hdcmpfalc56v22c.cc Method: HdCmpFalc56V22C::treatSignalStateActive() The only acceptable signal minors in this state are 'HdlcTaHdDataReq' and 'HdlcTaHdReleaseReq' Receiving any other 1

704903 16720 hd hdcmpfalc56v22c.cc Method: HdCmpFalc56V22C::setHdlcToBChannel() the passed in value for bchannel can not be used to set the register tss3 valid values are 1..31 1

705546 16721 hd hdcmpdspc.cc The DSP driver has been instructed to load an illegal/unknown DSP firmware. Parameter 1: slot Parameter 2: local DSP ID Parameter 3: frimware ID 1

706050 16722 hd hdprtdevicec.cc More than max number of ports in device class addPort call. Param 1: Device type Param 2: Device ID Param 3: Port type 1

706058 16723 hd hdprtdevicespec.cc The specified number of ports is higher than allowed for the chosen device type. Param 1: Device type Param 2: Number of ports Param 3: Maximum allowed number of ports 1

706059 16724 hd hdprtdevicespec.cc Attempted to add more ports to the device than allowed. Param 1: Device type Param 2: Number of already added ports Param 3: Maximum allowed number of ports 1

706233 16725 hd hdcmpdspaccessc.cc Polling the DSPs HRDY flag was interrupted because the flag did not get active within 500ms. Parameter 1: Slot ID Parameter 2: DSP ID (local) 1

706741 16726 hd hdcmp1prifpgac.cc The FPGA raised a collision warning interrupt, i.e. a timeslot that was requested for switching is already used in another connection. Params 0 timeslot 1 highways [ bit 0 -> hw0; 2

706745 16727 hd hdmodticprimaryratec.cc unexpected signal received in module interrupt handler of tic-1pri 1

706746 16728 hd hdmodticprimaryratec.cc wrong port parameter passed to method setSynchroMux() of module class 1

707532 16729 hd hdlic.cc Failed to write trial licence block to EIM 1

709200 16730 hd hdprtanalogtportc.cc The attenuation value passed to getAttenuation() is out of range. Param 1: attenuation value, Param 2: 0, Param 3: 0. 1

709278 16731 hd hdcmp1prifpgac.cc On startup the firmware could not be loaded into the FPGA of the module TIC-1PRI. Most likely the module is defect. Proposed solution: exchange the module on the A300/A150 1

709457 16732 hd hdmodtl04ab.cc The attenuatin enum value is out of range. Parameter 1 contains the value. 1

709458 16733 hd hdmodeaab2c.cc The attenuatin enum value is out of range. Parameter 1 contains the value. 1

710128 16734 hd hdcomhdlcaraprocc.cc Unexpected state of the analogue remote access (analog mode) process. Param 3: Error numeration. Param 1 and 2: depending on error number (param 3). See code. 1

712441 16735 hd hdfcc8260.cc A blocking of the ethernet driver in sending direction has been detected. Parameter 1: tbase fcc1 parameter Parameter 2: tbptr fcc1 parameter Parameter 3: txIntBuf 1

712662 16736 hd hdfcc8260.cc Invalid RISC command sent to FCC of the MPC8260. Param 1: 0 Param 2: 0 Param 3: Error location 1

712663 16737 hd hdfcc8260.cc Inconsistent error flags in the tx interrupt handler. The global tx error flag TXE is not consistent with the error information found in the tx buffer chain. Param 1: TXE is set (bool) 1

712667 16738 hd hdfcc8260.cc

The correction for the MPC8260's TBPTR bug has been called. In sending error cases the FCC sending pointer TBPTR may be some steps ahead of the correct position. This must be

handled by software. Parameter 1: Status word of the first buffer containing an error Parameter 2: Original TBPTR Parameter 3: Corrected TBPTR Attention: If in parameter 1 bit

7 (late collision, 80h) or bit 6 (retransmission limit, 40h) is set, a duplex mismatch is likely. Very often this will be the value 5c80h. 3

714861 16739 hd hdmododabc.cc

The channel number on relay port is out of range. Parameter 1: 0: card is in I/O mode, 1: card is in door port mode Parameter 2: channel number Parameter 3: 0: the channel is

jumpered as input, 1: ... as output If parameter 3 is 0, the jumpers are not correct for the configured function. 2

714863 16740 hd hdmododabc.cc A relay port object has been created with incorrect register addresses. Parameter 1: Input port address Parameter 2: Relay port address Parameter 3: 0 1

715526 16741 hd hdcmphwaccessa400.cc A400: Missing device address definition for this module type. Param 1: Slot Param 2: Module ID code (HdAllModuleIDEnum::Values) Param 3: 0 1

716672 16742 hd hdbioa400.cc Wrong index for access to CPU card DSPs. Param 1: index Param 2, 3: 0 1

716673 16743 hd hdbioa400.cc Wrong index for access to CPU card DSPs. Param 1: index Param 2, 3: 0 1

716676 16744 hd hdbioa400.cc Unknown CPU card ID in hdBioInitPbxType. This mistake is punished with a crash. Param 1: ID value Param 2 & 3: 0 1

716688 16745 hd hdbioa400.cc The selected slot type is unknown. Param 1: slot type value Param 2: 0 Param 3: Error location 1

716691 16746 hd hdbioa400.cc This module ID is missing in the list of system module revisions. Param 1: ID value Param 2 & 3: 0 1

716700 16747 hd hdbioa400.cc The selected interrupt priority in hdBioGetPendingInterruptLevel is unknown. Param 1: Interrupt priority Param 2 & 3: 0 1

716703 16748 hd hdbioa400.cc This slot is not a valid card slot and not the backplane. Param 1: Slot enum value Param 2 & 3: 0 1

716704 16749 hd hdbioa400.cc This slot is not a valid system module slot. Param 1: Slot enum value Param 2 & 3: 0 1

716705 16750 hd hdbioa400.cc Slot, device or bus mode are out of range. Param 1: Slot Param 2: Device Param 3: Bus mode 1

716707 16751 hd hdbioa400.cc This device is not valid on a system module. Param 1: Device enum value Param 2 & 3: 0 1

716708 16752 hd hdbioa400.cc This device is not valid on the CPU card. Param 1: Device enum value Param 2 & 3: 0 1

716709 16753 hd hdbioa400.cc The slot value is in range, but not handled. Param 1: Slot enum value Param 2 & 3: 0 1

716713 16754 hd hdbioa400.cc The 8 bit access to 16 bit device mode is not valid for this device type. Param 1: Slot enum value Param 2: Device enum value Param 3: 0 1

716715 16755 hd hdprtslotc.cc Unknown mainboard type. Defective or unknown hardware. Param 1: Mainboard type as read from the hardware Param 2 & 3: 0 1

716742 16756 hd hdprtslotc.cc There is no module installed in this slot to handle the interrupt. Parameter 1: Interrupt priority value Parameter 2: Slot ID Parameter 3: 0 2

718542 16757 hd hdprtanaloguemodulec.cc Wrong signal type for serial communication to analogue port device. Param 1: Signal number, Param 2: 0 Param 3: 0 1

718544 16758 hd hdprtanaloguemodulec.cc Device index for serial communication to analogue port device out of range. Param 1: Index value, Param 2: 0 Param 3: 0 1

719295 16759 hd hdcmpspifpgac.cc On startup the firmware could not be loaded into the FPGA of the CPU1 module. Most likely the module is defect! Proposed solution: exchange the module on the A300/A150 1

719783 16760 hd hdcmpfifodevicec.cc The FIFO device is blocked. Wrong address or hardware failure? Param 1: Register address Param 2: Retry counter Param 3: 0 1

720685 16761 hd hdprtbaseplatec.cc RUN STAPL Player for the backplane FPGA doesn' work. 1.Param: status; 2.Param: errorLine; 3.Param: exitCode. Look up the exit_code in function main() in jamstub.c. 2

721381 16762 hd hdmoda400cpu1c.cc Unknown device type found in module spec. Param 1: device id Param 2: device index Param 3: 0 1

721384 16763 hd hdcmpspifpgac.cc CPU1 FPGA acces test failed. Just after loading the FPGA, the bus transparency ist tested. There have been problems that inhibit useful operation of the CPU1 periphery. Param 1: 2

721693 16764 hd hdcmpdspaccessc.cc Failed to upload DSP firmware partition. 1

721696 16765 hd hdcmpdspaccessc.cc DSP application loader didn't get ready in time. 1

721697 16766 hd hdcmpdspaccessc.cc DSP application loader reported a partition size of 0. Can not load application (DSP firmware). 1

721718 16767 hd hdbioa400.cc The card exceeded the powerup time maximum value. Param 1: Slot number (1..7) Param 2: Last value from the power good register Param 3: Card presence flags 4

722277 16768 hd hdethdevice88E6xxxc.cc resetPort() - timeout waiting for reset to complete. 1

722304 16769 hd hdcmpa400fxsc.cc Unsupported device type found in spec. Getting the wrong device we do not know any indulgence. 1

722377 16770 hd hdethlink.cc Function ethWrite(..) ddWrite() returned error other than DEVICE_EQUEUE_FULL p1: INET_ERRBASE p2: INET_ERRDDWRITE p3: retVal <== this is the value we are 1

723225 16771 hd hdcmpdspc.cc Congestion tone detector: DSP reported overflow in complex resonator 1

723228 16772 hd hdcmpdspc.cc Dial tone detector: DSP reported overflow in complex resonator. 1

723229 16773 hd hdcmpdspc.cc Dial tone detector: DSP reported overflow in arctangent routine. 1

723230 16774 hd hdcmpdspc.cc Dial tone detector: Attempt to start congestion tone detector for an unknown country. 1

723231 16775 hd hdcmpdspc.cc Dial tone detector: Unknown event. Parameter 1: Event value. 1

723244 16776 hd hdprtbaseplatec.cc

The first access to backplane FPGA registers delivered wrong values or was not possible at all. Param 1: FPGA revision code (FFFFFFFFh: access failed) Param 2: Power good bits,

should be 01h (FFFFFFFFh: access failed) Param 3: 0 The revision code is out of range or the power good signal differs from its reset value. Values of 0xffffffff indicate an access

problem to the backplane FPGA. Values of bpFpgaRegPowerGood in the range 0..0xff can be caused by defective line cards. 2

723323 16777 hd hdbioa400.cc

Read access of the power good register before line cards are initialised. The access to the power good backplane FPGA register delivered a wrong value or was not possible at all.

Param 1: Number of slots on the backplane Param 2: Card present bits, 1 stands for a card in the slot Param 3: Power good bits, should be 01h at this time (FFFFFFFFh: access

failed) The power good signal differs from its reset value. A value of 0xffffffff indicates an access problem to the backplane FPGA. A value in the range 0..0xff can be caused by 4

723346 16778 hd hdbioa400.cc The reserved card ID bits are nonzero. There must be something wrong with the ID. The module is ignored and must be replaced. Param 1: Slot number (1..7) Param 2: The wrong 2

723366 16779 hd hdbioa400.cc

The access to the backplane FPGA failed during line card powerup. This problem typically does not depend on the current card. From the loop counter we can see if it fails in the

first access or at some later point. Param 1: Slot number (1..7) Param 2: Loop counter value (0...) Param 3: Card presence flags 2

723753 16780 hd hdbioiodevicec.cc Database backup parameter undefined in rtose5.conf p1: base address of database located in RAM p2: size of database located in RAM p3: - 1

723754 16781 hd hdbioiodevicec.cc Database backup copy parameter undefined in rtose5.conf p1: base address of database located in RAM p2: size if database located in RAM p3: - 1

723756 16782 hd hdbioiodevicec.cc Database size parameter not correct in rtose5.conf p1: size of database located in RAM p2: size of copy databse located in RAM p3: - To perform a background backup the size 1

723757 16783 hd hdbioiodevicec.cc Could not create database backup directory p1: errno p2: - p3: - 1

723758 16784 hd hdbioiodevicec.cc Database parameter undefined in rtose5.conf p1: base p2: size p3: - To be able to perform a restore of the database, the parameter (base and size) must be configured in 1

724084 16785 hd hdmoda400primaryratec.cc Could not load FPGA firmware (located in filesystem) into primary rate module's fpga. Meaning of parameters: p1: status of JAM Player p2: line of error in STAPL file p3: 1

724085 16786 hd hdmoda400primaryratec.cc Could not load FPGA firmware (part of linked application) into primary rate module's fpga. Meaning of parameters: p1: status of JAM Player p2: line of error in STAPL file p3: 1

724118 16787 hd hdbioa400.cc The read access to the backplane FPGA failed with an access timeout. Param 1: Command Param 2: Irq status Param 3: Loop counter in microseconds 1

724119 16788 hd hdbioa400.cc The write access to the backplane FPGA failed with an access timeout. Param 1: Command Param 2: Irq status Param 3: Loop counter in microseconds 1

724184 16789 hd hdcmpa400prifpgac.cc

The read access to the 2PRI module FPGA failed with an access timeout. Maybe you have an FPGA which does not match the module version (Serial version module without serial

FPGA FW in filesystem or prototype module with serial FPGA FW in filesystem)? Param 1: Address, Param 2: ready status, Param 3: Loop counter in microseconds. 2

724185 16790 hd hdcmpa400prifpgac.cc The write access to the 2PRI FPGA failed with an access timeout. Param 1: addr Param 2: ready status Param 3: Loop counter in microseconds 1

724187 16791 hd hdmoda400fxsc.cc Could not load FPGA firmware (part of linked application) into the FXS module's FPGA. The FXS module will not be started. Meaning of parameters: p1: status of JAM Player, p2: 4

724317 16792 hd hdprtbaseplatec.cc Could not load FPGA firmware (located in filesystem) into backplane fpga. Meaning of parameters: p1: status of JAM Player p2: line of error in STAPL file p3: exitcode 1

724318 16793 hd hdcmpspifpgac.cc Could not load FPGA firmware bitfile (located in filesystem) into CPU1 fpga. This is done via the SPI interface. 1

724362 16794 hd hdmoda400fxsc.cc Could not load FPGA firmware (located in filesystem) into FXS module's FPGA. Either the file is corrupt or the file is simply missing in the filesystem. Meaning of parameters: p1: 4

724815 16795 hd hdmoda400primaryratec.cc Wrong parameter passed to method, that sets the synchronization for the primary rate module of the a400. Port number must be 0 or 1. Most likely this is a software problem. 1

725083 16796 hd hdmoda400primaryratec.cc unexpected signal received in primary rate module interrupt handler: - HdModA400PrimaryRateC::serviceInterrupts() 1

725494 16797 hd hdmoda400primaryratec.cc Unknown 'module spec' passed to a400 primary rate module driver. As a consequence it is unknown what firmware to load into the FPGA. Parameter p1 is: 1

726071 16798 hd hdtstmemorypbx955.cc The application-ram checksum failed, Parameter1=mem.begin, Parameter2=mem.end 1

726314 16799 hd hdpsucontrolprocc.cc Access and control of the power supply are not possible. The system will try to run without controlling it. Parameter 1: PSU status byte value Parameter 2: PSU firmware version 2

726315 16800 hd hdpsucontrolprocc.cc Wrong signal major received in the power supply interrupt process. Parameter 1: signal pointer Parameter 2: signal major & minor Parameter 3: 0 2

726322 16801 hd hdcmpa400psucontrolc.cc Some process tried to attach while the observer is not free. Parameter 1: current observer instance pointer Parameter 2: Process ID of the signal sender Parameter 3: 0 1

726324 16802 hd hdcmpa400psucontrolc.cc Observer detach signal from wrong process received. Parameter 1: current observer instance pointer Parameter 2: Process ID of the signal sender Parameter 3: 0 1

726325 16803 hd hdpsucontrolprocc.cc The periodical temperature check finds the system unable to cool enough. The power manager is alerted to switch off loads or shut down the system. Parameter 1: Degrees 3

726326 16804 hd hdpsucontrolprocc.cc The power supply reported an over temperature. The power manager is alerted to switch off loads or shut down the system. Parameter 1: Status byte of the PSU Parameter 2: 2

726328 16805 hd hdpsucontrolprocc.cc

If OurIntOverCurrentBit (=0x02 of Status-Byte 1) is set, the current of the internal primary supply has reached the threshold of 4 A, which is 80% of the maximum load. The power

consumption must be reduced! A set OurOverCurrentBit (=0x10 of Status-Byte 1) says that the over current detection of the primary supply switch FET driver has triggered. This

may be an overcurrent in the internal supply or in the external supply (if present) which can not be measured as a concrete value. Parameter 1: Status-Byte 1 of the PSU

Parameter 2: The current of the internal primary supply in mA Parameter 3: The aux voltage raw value 4

726329 16806 hd hdpsucontrolprocc.cc External power supply undervoltage or overvoltage detected. Parameter 1: Status byte of the PSU Parameter 2: The voltage of the external power supply in mV Parameter 3: The 3

726330 16807 hd hdpsucontrolprocc.cc All present fans failed (one of one present, or two of two present). The power manager is alerted to shut down the system immediately. Parameter 1: Status byte of the PSU 2

726331 16808 hd hdpsucontrolprocc.cc

One of two present fans failed. These two redundant fans are still able to cool the system. An alert is sent to the power manager for information. The system needs to be

serviced to reestablish full reliability. Parameter 1: Status byte of the PSU Parameter 2: Degrees Celsius on the PSU Parameter 3: Fan Number (1 or 2) 3

726394 16809 hd

hdmoda400cpu1c/hdmoda400primary

ratec.cc

Error - I2C Eeprom Device of the EIP1 module is not responding. Therefore the EIP1 Module type and teh MAC address can be read. Parameters: 1: slotNr // The slot of

the EIP1 carrier board 2: subSlotId // Subslot of the EIP (0, 1) 3: I2C Address (0xA8, AC)// EEprom address which does not respond 1

726395 16810 hd hdmoda400cpu1c/hdmoda400primary Error - Invalid Module Type (Eeprom Data Invalid) The EIP1 Module types read from the Eeprom Data is invalid. Parameters: 1: slotNr // The slot of the EIP1 carrier 1

726396 16811 hd hdmoda400cpu1c/hdmoda400primary Error - I2C Eeprom Device read failed Therefore the EIP1 Module type and the MAC address can be read. Parameters: 1: slotNr // The slot of the EIP1 carrier board 2: 1

726397 16812 hd hdmoda400cpu1c/hdmoda400primary Error - Invalid MAC Address (Eeprom Data Invalid) Therefore the EIP1 Module MAC address is not valid. Parameters: 1: slotNr // The slot of the EIP1 carrier board 2: 1

726914 16813 hd hdcmpdspaccessc.cc Bus timeout detected while uploading DSP firmware in slow mode. Parameter1: Slot (SlotTypeEnum) Parameter2: Local DSP ID Parameter3: - 1

727408 16814 hd hdcmpdsic.cc Undefined PRIMA command request ID param 0 = PrimaPortId param 1 = SysChanId param 2 = primaCmdEnu 2

727409 16815 hd hdcmpdsic.cc Max. number of PRIMA exceeded 2

727495 16816 hd hdcmppgpmain.cc An RTP packet in to net direction could not be sent using the sendto call. Parameter 1: errno code from the IP stack. Parameter 2: IP destination address Parameter 3: UDP 1

727496 16817 hd hdcmppgpmain.cc Undefined signal minor received under MajorHdRtp. Parameter 1: The sender process ID Parameter 2: Signal major Parameter 3: Signal minor 1

727615 16818 hd hdfcc8260.cc Ethernet driver re-enalbed after high load situation. 1

727702 16819 hd hdcmppgpmain.cc A setsockopt call has failed during initialisation of the RTP send socket. Parameter 1: Error location Parameter 2: System error code Parameter 3: 0 1

727775 16820 hd hdbioiodevicec.cc The database copy failed: Parameter 1 = sizeDb, Parameter 2 = sizeDbCopy, Parameter 3 = errorcode from memcpy_s 1

728034 16821 hd hdcmpdspc.cc A watchdog timeout has happened in the DSP firmware. The DSP will be reset and the firmware restarted. Param1: DSP ID Param2: Slot 1

728196 16822 hd hdmodbriconfigsynchfacadec.cc Syntax Error in A400 configuration file for the xBRI module, see the following file in the A400 file system: /home/data/modconfig/bri.txt Expected to read a line, like: slot=7; 1

728197 16823 hd hdmodbriconfigsynchfacadec.cc Syntax Error in A400 configuration file for the xBRI module, see the following file in the A400 file system: /home/data/modconfig/bri.txt Expected to read a line, like: 1

728198 16824 hd hdmodbriconfigsynchfacadec.cc Syntax Error in A400 configuration file for the xBRI module, see the following file in the A400 file system: /home/data/modconfig/bri.txt Error is: The slot number exceeded the 1

728220 16825 hd hdmoda400xbric.cc Could not load FPGA firmware (located in filesystem) into xBRI module's fpga. Meaning of parameters: p1: status of JAM Player p2: line of error in STAPL file p3: exitcode 1

728221 16826 hd hdmoda400xbric.cc Could not load FPGA firmware (part of linked application) into xBRI module's fpga. Meaning of parameters: p1: status of JAM Player p2: line of error in STAPL file p3: exitcode 1

728222 16827 hd hdmoda400xbric.cc unexpected signal received in xBRI module interrupt handler: HdModA400xBriC::serviceInterrupts() 1

728223 16828 hd hdmoda400xbric.cc Wrong parameter passed to method, that sets the synchronization for the xBRI module of the a400. Port number must be in the range [0..7] . Most likely this is a software 1

728295 16829 hd hdcmphwaccessa400.cc The method hdCmpGetDeviceBaseAddress() is called to early. Have look at the callchain of the errorreport and sort the problem out. If you have questions, then ask Beat Schenk. 1

728308 16830 hd hdmoda400dsic.cc PRIMA FPGA firmware not found in filesystem (system will try to get it from code): parameter 1: HdAllModuleTypeEnum parameter 2: 0=STAPL file not found 1=VME file 3

728309 16831 hd hdmoda400dsic.cc PRIMA FPGA firmware could not be loaded: parameter 1: status parameter 2: errorLine parameter 3: exitCode Details see Ramlog of PBX startup! 2

729063 16832 hd hdpsucontrolproc.cc Access to the PSU does not work. The serial link connector or cable is damaged. Parameter 1: PSU status code (byte) Parameter 2: PSU firmware version Parameter 3: 0 2

729065 16833 hd hdpsucontrolprocc.cc Access to the PSU does not work. If the read values are identical to the command codes (status = 20h, version = 30h), the communication interrupt of the PSU firmware is 2

729072 16834 hd hdcmpdsideviceio.cc DSI FPGA not present (instance not found) param 1: 0 param 2: SysPortId inPortId param 3: SysChanId inChanId or: param 1: 1 param 2: inSlotId param 3: inLocalPortId 1

729073 16835 hd hdcmpdsideviceio.cc could not translate between portref and absolute port nr param 1: SysPortId portId param 2: 0 param 3: 0 1

729074 16836 hd hdcmpdsideviceio.cc Signal could not be sent (allocSig failed) 1

729076 16837 hd *** obsolete *** 3

729080 16838 hd hdprtslotc.cc There is no module installed in this slot to handle the signal. Parameter 1: Slot ID Parameter 2: 0 Parameter 3: 0 1

729084 16839 hd hdpowpowerdown.cc The power down interrupt has been raised in error. We still have power 5 seconds later! Parameter 1: 0, Parameter 2: 0, Parameter 3: 0. 2

729125 16840 hd hdqcctimer8377.cc Hardware timer of QCC has expired with unassigned function. Parameter 1: Timer index (0..3) Parameter 2: 0 Parameter 3: 0 1

729664 16841 hd hdmoda400dsic.cc DSI Module: The I2C device (Eeprom) is not accessible 1

729665 16842 hd hdmoda400dsic.cc Reading the I2C device (Eeprom) failed 1

729669 16843 hd hdprtmodulec.cc The slot number is not in the valid range for DC/DC sync. Parameter 1: Slot number Parameter 2: 0 Parameter 3: 0: disable, 1: enable 1

729670 16844 hd hdprtmodulec.cc The DC/DC variant of the module spec is unknown. The supply of this card is not getting initialised. Parameter 1: Slot number Parameter 2: DC/DC variant value Parameter 3: 0: 1

729679 16845 hd hdprtmodulec.cc No Swidecs are allowed on this platform. Parameter 1: Slot number Parameter 2: Number of Swidecs in the module spec Parameter 3: 0 1

729846 16846 hd hdqcccpm8260.cc Initialisation of the MPC8260 UPM has failed. This affects correct peripheral access. Parameter 1: 0 Parameter 2: 0 Parameter 3: 0 1

730656 16847 hd hdmodbriconfigsynchfacadec.cc The BRI configuration file for the A400 in the filesystem could not be opened for writing. 1

731004 16848 hd bguilcddrvprocc.cc LCD command could not be sent (FPGA LCD driver was not ready) Parameter 1: lcdCmdP->command, Parameter 2: lcdCmdP->length, Parameter 3: (UInt32)lcdCmdP->dataP 1

731005 16849 hd bguilcddrvprocc.cc LCD command Timeout Parameter 1: lcdCmdP->command, Parameter 2: lcdCmdP->length, Parameter 3: (UInt32)lcdCmdP->dataP 2

731006 16850 hd bguilcddrvprocc.cc LCD driver: Unexpected signal SigLedLcdResponse received (should be received only while waiting for SigLedLcdResponse) 2

732302 16851 hd hdmodbriconfigsynchfacadec.cc In method: HdModBriConfigSynchFacadeC::updateFile() Could not create directory: /home/data 1

732303 16852 hd hdmodbriconfigsynchfacadec.cc In method: HdModBriConfigSynchFacadeC::updateFile() Could not create directory: /home/data/modconfig 1

732418 16853 hd hdcmppcmswitchc.cc

Pcm Highways Tx Collision Detection on A470. Param 1: Number of the bit of the 8MBit Highway (H8M). Bit 4 = H8M 2, Bit 2 = H8M 1, Bit 1 = H8M 0. Param 2: Timeslot (0..7fh)

Param 3: Collision Source (Bit 0-2), Bit 2: Line Card Module, Bit 1: Cpu1, Bit 0: Dsp. See hwdoc-191: Pcm Highways Collision Register. 5

732507 16854 hd hdmoddsiconfigsynchfacadec.cc

Syntax Error in A400 configuration file for the xDSI module, see the following file in the A400 file system: /home/data/modconfig/dsi.txt Parameter 1 = 1: Expected to read a line,

like: slot=7; = 2: Expected to read a line, like: dsimode=AD2; = 3: The slot number exceeded the given internal limit = 4: Unknown interface mode (expected

AD2 or UDLT or DASL or UPN) 3

732508 16855 hd hdmoddsiconfigsynchfacadec.cc In method: HdModDsiConfigSynchFacadeC::updateFile() Parameter 1 = errno Parameter 2 = 1: Could not create /home/data directory = 2: Could not create 2

733719 16856 hd hdcmpa400psucontrolc.cc PSU FIFO handling error detected. The PSU link is disabled immediately. Parameter 1: Number of sent bytes, Parameter 2: Number of received bytes, Parameter 3: 0: send 2

733972 16857 hd hdlic.cc Failed to write feature block to EIM 1

734957 16858 hd hdbioa400.cc

No Manufacturing data block (factory block) in the FLASH for Cpu1 available! Param1: Hardware version id. Param2: First letter of the keyword. Param3: Second letter of the

keyword. ==> The Pbx (FXS and DSI modules) uses the "slow chip select mode" instead of the fast chip select mode! 4

734967 16859 hd hdmoda400cpu2c.cc Unknown interrupt occured in module handler HdModA400Cpu2C 1

734968 16860 hd hdmoda400cpu2c.cc Unexpected signal was received in interrupt signal handler of HdModA400Cpu2C. 1

735092 16861 hd hdutimothexfilewritec.cc Writing to the hex file failed. Parameter 1: Return value of writeRecord, Parameter 2: 0, Parameter 3: 0 when creating the file, 1 when closing the file. 2

735383 16862 hd hdcmpa400psucontrolc.cc

The firmware of the power supply is invalid or outdated. Make sure to update as soon as possible Parameter 1: Status byte of the PSU (refer to hwdoc-0186/Status-Byte)

Parameter 2: Firmware Version of the power supply (update is required for versions < 10 ) Parameter 3: 0 NOTE: Version 9 is a temporary firmware which allows to

update from < 9 to 10 and later. The functionality of version 9 is limited (e.g. no temp. control). Therefore the version has to be updated to 10 or higher as soon as possbile. 1

735384 16863 hd hdcmpa400psucontrolc.cc

The update of the Power Supply Firmware failed for some reason. Parameter 1: The number of pages written to the PSU (myPageCount) Parameter 2: The number of retries for a

page (myPageRetryCount) Parameter 3: The previous page number (myPreviousPage) Note: If the PBX is still running, please check the ramlog with telnet

<PBX.IP> 2323 and the "rld" command 1

735561 16864 hd hdcmppowersupplyasynchfacadec.cc Response timeout expired from Ose function "receiveSigTmo". No reply in function sendAndWaitReadPowerSupplyValue(). param 1: Major. param 2: Minor. 1

735562 16865 hd hdpsucontrolprocc.cc Response timeout expired from Ose function "receiveSigTmo". No reply in function sendAndWaitReadPowerSupplyValue(). param 1: Major. param 2: Minor. param 3: 1

735563 16866 hd hdcmpa400psucontrolc.cc Wrong signal major/minor received in the power supply control process. Parameter 1: signal pointer Parameter 2: signal major & minor Parameter 3: error report index 1

735612 16867 hd hdcmpa400tempsens.cc

Access to temperature sensor Cpu1 and hardware real time clock (rtc) over I2C interface don't work. parameter 3: = 0: Complete failure or transmission retries. parameter 3: = 1:

biosOpen returns no valid handle. parameter 3: = 2: The access failed or the decoded temperature value is suspect. 3

735614 16868 hd hdcmppgpmain.cc Sending StMS trigger packets is not possible. StMS will not work in "to net" direction. Parameter 1: Errno code from the IP stack, Parameter 2: 0, Parameter 3: 0. 1

735705 16869 hd hdcmphwaccessa400.cc The Pbx (FXS and DSI modules) uses the "slow chip select mode" instead of the fast chip select mode! Param1: Cpu1 hardware id value. Param2: true/false: Manufacturing data 1

735894 16870 hd hdcmpdsideviceioc.cc Illegal message length received from DSI FPGA Parameter 1: inLocalPortId Parameter 2: inChanId Parameter 3: rxLength 1

736022 16871 hd hdmoda400cpu2c.cc The STAPL player failed to load the CPLD file in the filesystem. Parameters are: - status - errorLine - exitCode In the OSE ramlog you find a line of the form: CPU2-CPLD: STAPL 1

736059 16872 hd hdmoda400fxsc.cc The FPGA test access function detected some failures. The FXS module will not be started. Parameter 1: Error Counter A, Parameter 2: Error Counter B, Parameter 3: Slot 3

736173 16873 hd hdpsucontrolprocc.cc Problem with the Power Supply Control process. What kind of problem it is, check the code. Param 3: Index of the error report. 1

736236 16874 hd hdethlink.cc DoS: An IP address has been added to the blocked address list. 1

736239 16875 hd hdethlink.cc DoS: An IP address was removed from the blocking list 1

736671 16876 hd hdpsucontrolprocc.cc All installed fans are running again (M470 only). Param1: not used Param2: not used Param3: Total Number of Fan Failures 3

736675 16877 hd hdmoda400cpu2c.cc For A400/CPU2: an USB overcurrent alarm is generated if the power consumption on the USB ports of the CPU2 is too high Parameter P1: the slotid of the CPU2 module 2

736716 16878 hd hdlicsle4442.cc The licence chip is not responding at all. Parameter 1: ATR value, Parameter 2: 0, Parameter 3: 0. 1

736717 16879 hd hdlicsle4442.cc The licence chip delivers an unsupported ATR value. Parameter 1: ATR value, Parameter 2: 0, Parameter 3: 0. 1

736765 16880 hd hdlicsle4442.cc The licence chip can not be unlocked for writing. Parameter 1: 0, Parameter 2: 0, Parameter 3: 0. 1

736817 16881 hd hdlicsle4442.cc The licence chip security code verification can not be executed. Parameter 1: 0, Parameter 2: 0, Parameter 3: 0. 1

736818 16882 hd hdlicsle4442.cc Unlocking the licence chip for writing failed. The PSC is still read as zero. Parameter 1: 0, Parameter 2: 0, Parameter 3: 0. 2

736820 16883 hd hdlicsle4442.cc The licence chip security code update can not be executed. Parameter 1: 0, Parameter 2: 0, Parameter 3: 0. 1

736821 16884 hd hdlicsle4442.cc The licence chip write access can not be executed. Parameter 1: 0, Parameter 2: 0, Parameter 3: 0. 1

736854 16885 hd hdlicsle4442.cc The licence chip can not be set to idle state. Still trying to continue access. Parameter 1: Number of low bits (1..32), should be zero, Parameter 2: 0, Parameter 3: 0. 1

739496 16886 hd bguiinfinterfaceprocc.cc The length of the temperature string is to long Param1: string length Param2: 0 Param3: 0 1

739933 16887 hd hdcmppgpmain.cc Failed to load DSP firmware Param1: DSP ID Param2: Slot For more deatils see ramlog 1

739934 16888 hd hdcmppgpmain.cc Failed to load DSP firmware. Could not find DSp application loader. Param1: DSP ID Param2: Slot For more details see ramlog. 1

739936 16889 hd hdcmppgpmain.cc Failed to reset DSP. Could not find DSP firmware. Param1: DSP ID Param2: Slot For more details see ramlog. 1

740362 16890 hd hdpsucontrolprocc.cc The value read from the PSU controller could not be verified. Two consecutive read did not deliver the same result. The read value might be invalid. Param 1: Number of read 2

740556 16891 hd hdcmpdspc.cc A system bus error is transmitted to a C55x DSP CPU or when a bus error occurs in a C55x DSP CPU. Param1: DSP Id Param2: DSP Slot 1

740823 16892 hd hdanaprocc.cc Handling the signal minor HdPrtAnaSwitchRelayReq, the passed port reference does not represent an absolute port. Parameter 1: Port reference, Parameter 2: Resulting absolute 1

740830 16893 hd hdanaprocc.cc Unknown Minor for MajorPrtControl received in HdAnaProcC. Parameter 1: Sender process ID, Parameter 2: Signal major, Parameter 3: Signal minor. 1

740831 16894 hd hdcmpmeteringdetc.cc No FXO module found for configuration of the metering detector. Parameter 1: Slot number, Parameter 2: Module class pointer before cast, Parameter 3: 0. 1

740833 16895 hd hdcmpqslacc.cc No analogue module found. Parameter 1: 0, Parameter 2: 0, Parameter 3: 0. 1

740835 16896 hd hdcmpve890c.cc No valid device ID passed to ApiCommand. Parameter 1: Device ID, Parameter 2: 0, Parameter 3: 0. 2

740836 16897 hd hdcmpve890c.cc Too many parameter bytes for the serial data structure. Parameter 1: Number of bytes, Parameter 2: 0, Parameter 3: 0. 1

740837 16898 hd hdcmpvpcontrolfifoc.cc Device index too big in writeSerData. Parameter 1: Device index. Parameter 2: 0, Parameter 3: 0. 1

740839 16899 hd hdcmpvpcontrolfifoc.cc Device index too big in readSerData. Parameter 1: Device index. Parameter 2: 0, Parameter 3: 0. 1

740840 16900 hd hdintmodules.cc No signals are handled in prio high interrupt process. Parameter 1: Signal pointer. Parameter 2: Sender process ID (if the pointer is not NULL), Parameter 3: Signal number (if the 1

740853 16901 hd hdmoda400fxoc.cc The FPGA test access function detected some failures. The FXO module will not be started. Parameter 1: Error Counter A, Parameter 2: Error Counter B, Parameter 3: Slot 1

740855 16902 hd hdmoda400fxoc.cc Could not load FPGA firmware (located in filesystem) into FXO module's FPGA. Either the file is corrupt or the file is simply missing in the filesystem. Meaning of parameters: p1: 1

740856 16903 hd hdmoda400fxoc.cc Error making the VoicePath API device object and context. Parameter 1: Device index on the module, Parameter 2: Status word of the VpMakeDeviceObject call, Parameter 3: 0. 1

740857 16904 hd hdmoda400fxoc.cc Error making the VoicePath API FXO line object and context. Parameter 1: Device index on the module, Parameter 2: Line index on the device, Parameter 3: Status word of the 1

740859 16905 hd hdmoda400fxoc.cc The device is not properly initialised. Parameter 1: Device index on the module, Parameter 2: Status word of the VpInitDevice call. Parameter 3: 0. 1

740861 16906 hd hdmoda400fxoc.cc Unsupported device type found in module spec. Parameter 1: Device type from the spec, Parameter 2: Device index on the module. Parameter 3: 0. 1

740881 16907 hd hdprtanalogfxoportc.cc The VoicePath API-II call VpInitLine failed. Parameter 1: Slot number, Parameter 2: Port index on the module, Parameter 3: Status word of the VpInitLine call. 2

740882 16908 hd hdprtanalogfxoportc.cc The VoicePath API-II call VpConfigLine failed. Parameter 1: Slot number, Parameter 2: Port index on the module, Parameter 3: Status word of the VpConfigLine call. 1

740883 16909 hd hdprtanalogfxoportc.cc The VoicePath API-II call VpSetOption failed. Parameter 1: Slot number, Parameter 2: Port index on the module, Parameter 3: Status word of the VpSetOption call and option ID 1

740884 16910 hd hdprtanalogfxoportc.cc The VoicePath API-II call VpSetLineState failed. Parameter 1: Slot number, Parameter 2: Port index on the module, Parameter 3: Status word of the VpSetLineState call and 1

740885 16911 hd hdprtanalogfxoportc.cc The parameters to connectTwoWay are out of range. Parameter 1: Highway, Parameter 2: Timeslot, Parameter 3: Channel. 1

741683 16912 hd hdmoda400fxoc.cc We received an event from Voicepath API with an invalid line ID. Parameter 1: The line ID, Parameter 2: The device index on the module (should be identical to the line ID), 2

741688 16913 hd hdmoda400fxoc.cc Error defining the VoicePath API FXO line ID. Parameter 1: Device index on the module, Parameter 2: Line index on the device, Parameter 3: Status word of the VpMapLineId 1

741993 16914 hd hdbioiodevicec.cc Backup parameters could not be initialised No backup can be written to the file system. 1

741994 16915 hd hdbioiodevicec.cc Backup-Error: Signal timed out, backup probably not done! 1

741995 16916 hd hdbioiodevicec.cc Backup-Error: We could not set the priority back to the original backup process priority! p1: client priority p2: original priority p3: - 1

742082 16917 hd hdcmpfifodevicec.cc The FIFO buffer size being read from the hardware is not a power of two. Parameter 1: The FIFO register set pointer, Parameter 2: The buffer size in bytes, Parameter 3: 0. 1

742140 16918 hd hdprtanalogfxoportc.cc The line side device command was not found in the AC profile. Parameter 1: Byte value at the command location, Parameter 2: Byte value at the command location + 1, 1

742409 16919 hd hdmoda400fxoc.cc The Voicepath VpInitDevice call timed out. Parameter 1: Timeout in ms, Parameter 2: Status code from last API tick call, Parameter 3: 0. 3

742777 16920 hd hdmodbp957c.cc On startup the firmware could not be loaded into the FPGA of the mainboard MBA-3. Most likely the mainboard is defect. Proposed solution: exchange the mainboard with a new 1

742894 16921 hd hdmoda400fxoc.cc Too long or too short time for transmission of metering init to TAX module. Parameter 1: Loop count, Parameter 2: 0, Parameter 3: 0. 1

742977 16922 hd hd/hdbioiodevicec.cc Backup files could not be deleted (persistency layer). No answer from backup processe within 10sec. 1

743040 16923 hd hdtosserver.cc Calls of hdTosStart() with expTimeMs too low or too high are not allowed. Parameter 1: Expiry time in milliseconds, Parameter 2: Maximum number of ticks constant, Parameter 1

743127 16924 hd hdanaproc.cc Unknown Minor for MajorHdInt received in HdAnaProcC. Parameter 1: Sender process ID, Parameter 2: Signal major, Parameter 3: Signal minor. 1

743177 16925 hd hdcmpdspc.cc Audio Player: No silence pattern available for this codec type. Param1: codec type value (see ArMedCodecType). 1

743333 16926 hd hdtstselft.cc testfunction hdTstMain is called with state out of enum HdTstRunstateEnum 1

743334 16927 hd hdtstselftproc.cc Unknown signal minor. 1

743335 16928 hd hdtstselft.cc Attempt to initiate the watchdog SW process supervision a second time 1

744129 16929 hd hdanaporcc.cc Unknown Minor for MajorPgpSwitch received in hdAnaProc. Parameter 1: Sender process ID, Parameter 2: Signal major, Parameter 3: Signal minor. 2

744293 16930 hd hdcmpvpcontrolfifoc.cc Despite of some data present, none have been sent. There is a problem with the card bus or the FIFO hardware on the card. To see the error cause, look at the error report of the 2

744302 16931 hd hdcmpvpcontrolfifoc.cc Despite of some data present, none have been sent. There is a problem with the card bus or the FIFO hardware on the card. To see the error cause, look at the error report of the 2

745034 16932 hd hdprtanalogsubscriberc.cc Unhandled FXS hook switch event. An "on hook" or "off hook" event ocurred in an FXS port mode which does not handle such events. Parameter 1: Analog port number, 2

746560 16933 hd hdprtanalogsubscriberc.cc The call to read the loop current on an analogue device failed. Parameter 1: Analog port number, Parameter 2: The port index relative to the device, Parameter 3: Port mode. 1

746561 16934 hd hdprtanalogsubscriberc.cc Wrong port mode for the init switch input mode call. Parameter 1: Analog port number, Parameter 2: Port mode, Parameter 3: 0. 1

748032 16935 hd hdmodpriconfigsynchfacadec.cc Syntax Error in A470 configuration file for the *primary rate* module, see the following file in the A470 file system: /home/data/modconfig/pri.txt It is expected that we read a 1

748033 16936 hd hdmodpriconfigsynchfacadec.cc Syntax Error in A470 configuration file for the *primary rate* module, see the following file in the A400 file system: /home/data/modconfig/pri.txt It is expected that we read a 1

748034 16937 hd hdmodpriconfigsynchfacadec.cc Syntax Error in A470 configuration file for the *primary rate* module, see the following file in the A470 file system: /home/data/modconfig/pri.txt Error is: The slot number 1

748035 16938 hd hdmodpriconfigsynchfacadec.cc In method: HdModPriConfigSynchFacadeC::updateFile() Could not create directory: /home/data 1

748036 16939 hd hdmodpriconfigsynchfacadec.cc In method: HdModPriConfigSynchFacadeC::updateFile() Could not create directory: /home/data/modconfig 1

748037 16940 hd hdmodpriconfigsynchfacadec.cc The primary rate configuration file in the filesystem for the A470 PBX could not be opened for writing. 1

748685 16941 hd

hdheaheatmgrc.cc

hdpsucontrolprocc.cc

Overheat Alarm disappeared (temperature is within the range). For A300: Overheat alarm is generated if the temperature is below the limit in the PBX: - p1 is 1 - p2 is

temperature For A470/CPU2: - Overheat alarm is generated if the temperature is below the limit on CPU2 - Overheat alarm is generated if the temperature is below the limit

or FXO For A470 the parameters are: - p1 : card number - p2 is temperature (for CPU2 and CPU2-S this is carrier board temp) - p3 is temperature (for CPU2-S only, this is

core temp (127 if unknown)) As we reuse the overheat counterpart alarm on A470, the same errorid is used in three files: - hdheaheatmgrc.cc - hdpsucontrolprocc.cc - 5

748690 16942 hd hdocmocwactivestc.cc Over current warning (OCW) has disappeared. The 40V port power supply is within the limit. 1

748691 16943 hd hdocmocdactivestc.cc Over current disconnect (OCD) has disappeared. The 40V port power supply is within the limit, ports will be switched on. 1

749290 16944 hd hddchtx.cc Can not transmit D-Channel message, when - L1 of Port is in state *l1Reset* - and the port is not an IsdnT Port The current message is thrown away and hereby lost forever 2

753955 16945 hd hdmodbpmbcc.cc Unsupported device type found in module spec while constructing the MBC driver instance. Parameter 1: Device type value, Parameter 2: Device index, Parameter 3: 0. 1

755703 16946 hd hdprtad2smodportc.cc Addressing the threshold register of an AD2 module is not possible. Parameter 1: Slot ID, Parameter 2: Register pointer, Parameter 3: 0. 1

761730 16947 hd hdmoda400cpu2gatewayprocc.cc CPU2 has not written its core temperature via MDT table 216 for 5 minutes 1

762373 16948 hd hdbioiodevicec.cc Could not write backup date/time into /home/bin/backup.txt. p1: status (arlibkeyvalueparser.hh:GetAttributeStatus) p2: - p3: code location 2

763383 16949 hd hdcmpprima.cc Unknown signal minor received p1: major p2: minor p3: magic number (code location) 1

763944 16950 hd hdprxi.cc Failed to send the flow control signal to L2DsiManProc 1

763945 16951 hd hdprxi.cc Failed to send ad2 status signal to L2DsiManProc. 1

763947 16952 hd hdprxi.cc Failed to send received ad2 message to L2DsiManProc. 1

763948 16953 hd hdprxl.cc Failed to send port reset request to L2DsiManProc. 1

764267 16954 hd hddchmph.cc ISDN port number is bigger than allowed range. Parameter 1: iPortNr, Parameter 2: value 1..5, indicating location of errorReport within the file 1

764268 16955 hd hddchmph.cc ISDN port is not of expected type HdAllPortTypeC::IsdnT. Parameter 1: iPortNr 1

764269 16956 hd hddchmph.cc port type is not one of the expected ISDN ports. Parameter 1: iPortNr 1

764270 16957 hd hddchmph.cc unexpected signal minor recived. Parameter 3: signal minor 2

765445 16958 hd hddchmph.cc Failed to handle L1 reset timeout. ISDN port Nr. out of range. Paramater 1: ISDN port number. 1

765448 16959 hd hddchmph.cc Failed to handle L2 establish request. ISDN port Nr. out of range. Parameter 1: ISDN port Nr. 1

765449 16960 hd hddchmph.cc Failed to stop L2 deblock timer. ISDN port Nr. out of range. Parameter 1: ISDN port Nr. 1

765450 16961 hd hddchmph.cc Failed to handle L2 deblock timeout. ISDN port Nr. out of range. Parameter 1: ISDN port Nr. 1

765451 16962 hd hddchmph.cc Failed to handle L2 deblock timeout. ISDN port is not a T-port. Parameter 1: ISDN port Nr. 1

765452 16963 hd hddchmph.cc Failed to handle deactivate request. ISDN port Nr. is out of range. Parameter 1: ISDN port Nr. 1

765453 16964 hd hddchmph.cc Failed to handle deactivate request. ISDN port is not a trunk. Parameter 1: ISDN port Nr. 1

765454 16965 hd hddchmph.cc hdDchMphProc received unknown minor for MajorMod. Parameter1: minor 1

765474 16966 hd hdpsucontrolprocc.cc Positive alarm: External power supply is running. Parameter 1,2,3: 0, No Content. 1

765476 16967 hd hdpsucontrolprocc.cc Negative alarm: External power supply is not ok. Parameter 1,2,3: 0, No Content. 1

765477 16968 hd hdpsucontrolprocc.cc Positive alarm: Internal power supply is running. Parameter 1,2,3: 0, No Content. 1

765478 16969 hd hdpsucontrolprocc.cc Negative alarm: Internal power supply is not ok. Parameter 1,2,3: 0, No Content. 1

769097 16970 hd hdprtanalogfxoportc.cc

Localisation failure! ==> The country dependent value can't be set! Parameter 3: =1: Attribute "GainRxTuneIncDb10" can't be converted from char to int. =2: Attribute

"GainTxTuneIncDb10" can't be converted from char to int. =3: Attribute "AustraliaSeizureVoltagePatch" can't be converted from char to bool. =4: Localisation file can't be opened.

Localisation file is missing in the file system. =5: Attribute "GainRxTuneIncDb10" can't be found in the localisation file. =6: Attribute "GainTxTuneIncDb10" can't be found in the

localisation file. =7: Attribute "AustraliaSeizureVoltagePatch" can't be found in the localisation file. 6

769106 16971 hd hdmoda400fxoc.cc

Localisation failure! ==> The country dependent value can't be set! Parameter 3: =1: Attribute "MeteringDetSetting" can't be converted from char to UInt8. Parameter 1:

Returned attribute buffer. Parameter 2: 0. =2: Attribute "MeteringDetSetting" can't be found in the localisation file. Parameter 1: Returned value of function

arLibGetAttributeByFileId(). Parameter 2: 0. =3: Localisation file can't be opened. Localisation file is missing in the file system. Parameter 1: file Id. Parameter 2: 0. 5

769728 16972 hd hdprtanalogsportc.cc


"GainIncDigitalToAnalogDb10" can't be converted from char to int. =2: Attribute "GainIncDigitalToAnalogDb10" can't be found in the localisation file. =3: Attribute

"GainIncAnalogToDigitalDb10" can't be converted from char to int. =4: Attribute "GainIncAnalogToDigitalDb10" can't be found in the localisation file. 1

769750 16973 hd hdprtanalogsubscriberc.cc


"25HzRingingFrequency" can't be converted from char to bool. =2: Attribute "25HzRingingFrequency" can't be found in the localisation file. =3: Attribute

"TrapezeRingingWaveForm" can't be converted from char to bool. =4: Attribute "TrapezeRingingWaveForm" can't be found in the localisation file. =5: Attribute "V23FskSignal"

can't be converted from char to bool. =6: Attribute "V23FskSignal" can't be found in the localisation file. 2

769814 16974 hd hdanaimpedancec.cc


"[AnalogSubscriberSettingsGeneral]","Impedance" can't be converted from string to HdAnaImpedancec::Values. =2: Attribute "[AnalogSubscriberSettingsGeneral]","Impedance"

can't be found in the localisation file. =3: Attribute "[AnalogTrunkSettingsGeneral]","Impedance" can't be converted from string to HdAnaImpedancec::Values. =4: Attribute

"[AnalogTrunkSettingsGeneral]","Impedance" can't be found in the localisation file. 1

769994 16975 hd hdcmpmeteringdetc.cc

Localisation failure! ==> The country dependent value can't be set! Parameter 3: =1: Attribute "MeteringDetSetting" can't be converted from char to UInt8. Parameter 1:

Returned attribute buffer. Parameter 2: 0. =2: Attribute "MeteringDetSetting" can't be found in the localisation file. Parameter 1: Returned value of function

arLibGetAttributeByFileId(). Parameter 2: 0. =3: Localisation file can't be opened. Localisation file is missing in the file system. Parameter 1: file Id. Parameter 2: 0. 2

770010 16976 hd hdmodtic4abc.cc


"GainAnalogToDigitalTuneIncDb10" can't be converted from char to int. =2: Attribute "GainAnalogToDigitalTuneIncDb10" can't be found in the localisation file. =3: Attribute

"GainDigitalToAnalogTuneIncDb10" can't be converted from char to int. =4: Attribute "GainDigitalToanalogTuneIncDb10" can't be found in the localisation file. =5: Attribute

"Reg16InternatCtrl1" can't be converted from char to UInt8. =6: Attribute "Reg16InternatCtrl1" can't be found in the localisation file. =7: Attribute "Reg26DcTerm" can't be

converted from char to UInt8. =8: Attribute "Reg26DcTerm" can't be found in the localisation file. =9: Attribute "Reg30Full2" can't be converted from char to UInt8. =10:Attribute

"Reg30Full2" can't be found in the localisation file. =11:Attribute "Reg31DaaCtrl5" can't be converted from char to UInt8. =12:Attribute "Reg31DaaCtrl5" can't be found in the

localisation file. =13:Attribute "Reg59SparkQuenchCtrl" can't be converted from char to UInt8. =14:Attribute "Reg59SparkQuenchCtrl" can't be found in the localisation file. 2

770098 16977 hd hdprtanalogtportc.cc


"GainIncAnalogToDigitalDb10" can't be converted from char to int. =2: Attribute "GainIncAnalogToDigitalDb10" can't be found in the localisation file. =3: Attribute

"GainIncDigitalToAnalogDb10" can't be converted from char to int. =4: Attribute "GainIncDigitalToAnalogDb10" can't be found in the localisation file. =5: Attribute

"GainIncShortDb10" can't be converted from char to int. =6: Attribute "GainIncShortDb10" can't be found in the localisation file. =7: Attribute "GainIncDigitDb10" can't be 1

770574 16978 hd hddchcom.cc

Moved from hdcmpfalc56v22c.cc Failed to read ISDN driver parameter from localisation file. ISDN CRC4 interworking setting from localisation file. Parameter 1: 1 - Could not

open localisation file 2 - Section/key missing or invalid in the file ISDN CRC4 interworking setting 3 - Section/key missing or invalid in the file T

port message queuing setting 4

770645 16979 hd hddchmph.cc Failed to read L2 reporting setting from localisation file. Parameter 2: 1 - Could not open localisation file 2 - Section/key missing or invalid in the file 1


Read tuning block of the module: Parameter 3 = 0: The EEPROM at I2C bus address devAddress is not accessible. Parameter 1: Slot number. Parameter 2:

devAddress. Parameter 3 = 1: The slot number is not valid. Parameter 1: Slot number. Parameter 2 = 0. 3

770785 16981 hd hdmoda400fxoc.cc Read tuning block of the module: The EEPROM read access from offset blockOffset to offset (blockOffset + blockSize -1) failed. Parameter 1: Slot number of the module. 1


Read tuning block: The tuning data block is invalid. The fine tuning of gain values isn't done. It possibly isn't a series module. Our hardware team can insert the tuning block.

Parameter 1: Slot number. Parameter 2: Upper word: Block type code. Lower word: Total block length. Parameter 3: Gain error value. 2

774681 16983 hd hdcmpqslacsc.cc The FXS port doesn't work correctly! No Coefficients are loaded! The FXS port just works with the default coefficients of the chip. No Coefficients exist for this impedance. 2

776219 16984 hd hdbiobackupprocc.cc Could not get the backup time (UTC) p1: errno p2: - p3: - 1

776279 16985 hd hd/hdbiopersistencyasynchfacade.cc Hunt for backup process failed, no backup/restore possible. p1: pid p2: - p3: - 1

776280 16986 hd hd/hdbiopersistencyasynchfacade.cc Send backup timeout expired. 1

776281 16987 hd hd/hdbiopersistencyasynchfacade.cc Send restore timeout expired 1

776282 16988 hd hd/hdbiopersistencyasynchfacade.cc Send remove backup file timeout expired 1

776682 16989 hd cmgr/src/hd/hdbiobackupprocc.cc Disable db copy user mode write permission failed. p1: status p2: db copy address p3: - 1

779305 16990 hd hdmoda400fxoc.cc Too much time needed to write dtmf digits 1

783571 16991 hd hdcmpqslacsc.cc Not supported FXS ringer configuration (frequency/wave-form). The coefficients for the given frequency are loaded. 2

628027 18001 pr prpgppatterngen.c Unknown OSE signal received in the Acknowledge Tone Process -> Unknown Major or Minor signal part! 1

628028 18002 pr prpgppatterngen.c Impossible Bcs reference for starting an ack tone pattern. 1

628034 18003 pr prpgpportledbcs8.c Error in LED jobs : more than Int8Max jobsError in LED jobs : more than Int8Max jobs. 1

628035 18004 pr prpgpportledbcs8.c Error in intern port references for blinking port LED. 1

628036 18005 pr prpgpportledbcs8.c Error in intern-extern port references for blinking port LED. 1

628037 18006 pr prpgpportledbcs8.c Error in LED jobs : no more jobs. 1

628038 18007 pr prpgpaudiorhythm.c Impossible bcs ref or mismatch in the audio rhythm tables. 1

628039 18008 pr prpgpaudiorhythm.c Wrong signal for prpgpgaudiorhythm process. 1

628042 18009 pr prpgpaudiorhythm.c Unknown audio rhythm to start 1

628043 18010 pr pranaconfiguration Wrong parameter handling for flash 1

628044 18011 pr pranaconfiguration Number acces for international dial number too big 1

628055 18012 pr prpgpaudiorhythm.c Error in rhythm generating on fix timeslots 1

628056 18013 pr prpgpaudiorhythm.c Audio rhythm generation could not start 1

628057 18014 pr prpgpaudiorhythm.c Audio rhythm generation could not continue 1

628058 18015 pr prpgpaudiorhythm.c Audio rhythm generation for confernce could not continue 1

628059 18016 pr prpgpaudiorhythm.c Audio rhythm generation for conference could not start 1

628087 18019 pr prpgpaudiorhythm.c A tone rhythm generation was still active 1

628088 18020 pr prpgpaudiorhythm.c A time out for tone rhythm generation was still active 1

628089 18021 pr prpgpaudiorhythm.c A conference rhythm generation was still active 1

628090 18022 pr prpgpaudiorhythm.c A time out for conference rhythm generation was still active 1

628095 18023 pr prbchl3.c Unknown bcsRef to release a bchan. 1

628096 18024 pr prchserver.c prp1_tele_service_busy : has not been found the passed bchan in the passed portref 1

628097 18025 pr prchservewr.c Has not been reserved in the general channel array, a field for the passed bchannel 1

628098 18026 pr prchserver.c One more than pbx manageable bchannels. 1

628099 18027 pr prchserver.c Has not been released, to the general channels array, the field of the passed channel. 1

628102 18029 pr prpgpaudiorhythm.c Conference reference out of range for audio rhythm stopping 1

628103 18030 pr prpgpaudiorhythm.c Conference reference out of range or mismatch in the audio rhythm tables 1

628104 18031 pr prpgpaudiorhythm.c Bcsref out of range for audio rhythm stopping 1

628113 18032 pr prhrsrhythm.c Unknown rhythm to generate for L3 1

628114 18033 pr prhrsrhythm.c Unknown bcs ref in Pr B channel admin. for rhythm generation 1

628216 18034 pr prpgpportledbcs8.c No port reference to port Id for LED blink 1

628217 18035 pr prpgpportledbcs8.c Error with port reference for Mup1S3T8Eset LED blink 1

628218 18036 pr prpgpportledbcs8.c Error with port reference for Mup V1, Mup1S1T4Eset LED blink 1

628219 18037 pr prpgpportledbcs8.c Error with port reference for Mup1S2T4Eset, Mup2S2T8Eset LED blink 1

628220 18038 pr prpgpportledbcs8.c Unknown MUP version for MUP LED blink 1

628221 18039 pr prpgpportledbcs8.c Error with port reference for left Module LED blink 1

628222 18040 pr prpgpportledbcs8.c No trunk LED for this Module on left side 1

628223 18041 pr prpgpportledbcs8.c Error with port reference for right Module LED blink 1

628224 18042 pr prpgpportledbcs8.c No trunk LED for this Module on left side 1

628225 18043 pr prpgpportledbcs8.c No trunk LED for OPT Modules 1

628299 18044 pr prpgpportledltx.c Error in LED jobs : more than Int8Max jobs for portled LTx 1

628300 18045 pr prpgpportledltx.c Error in LED jobs : no more jobs for portled LTx 1

628361 18046 pr prdtmfsend.c Error has been detected in the DTMF sender 1

628456 18047 pr prasa.c Invalid state 1

628457 18048 pr prasa.c Invalid state 1

628458 18049 pr prasa.c Invalid GB release type 1

628459 18050 pr prasa.c Invalid GB release type 1

628460 18051 pr pranaasa.cc Unknown minor or timer enum type. Param1: Analogue port id. Param2: Minor or timer enum type. Param3: 0. 2

628461 18052 pr prsp1.c Invalid channel number 1



628464 18055 pr prsp1.c Invalid port number 1

628465 18056 pr prsp1.c Dummy routine should not be called 1

628466 18057 pr prsp1.c Invalid major signal 1

628467 18058 pr prtna.c tnaOldState should be TnaPrepInService 1

628468 18059 pr prtna.c Invalid tnaOldState 1



628471 18062 pr prtna.c Invalid tnaNewState 1

628472 18063 pr prtna.c Invalid number of ringPhases 1

628568 18064 pr prtonmtosp1.c Invalid call port type 1

628585 18065 pr prbchl3.c Port / b-channel combination already in the list of active bcsref's. 1

628589 18066 pr prchserver.c linked list of active bcsrefs is corrupted 1

628590 18067 pr prbchadm.c linked list of active bcsrefs is corrupted 1





628595 18072 pr prgrbclear.c linked list of active bcsrefs is corrupted 1

628684 18073 pr prsp1.c invalid minor 1

628758 18074 pr prsp1dect.c Invalid Sp1DectHsP : Sp1DectHsTable not allocated 1

628759 18075 pr prsp1dect.c bad command type for Sp1ServInfoFromRbc 1

628761 18077 pr prtonmtosp1.c Invalid Rhythm Type for SP1 message generation 1

628762 18078 pr prchserver.c corrupted b-channel list 1

628763 18079 pr prchserver.c invalid startCh or stopCh 1

628826 18081 pr prsp1mod.c Sp1: wrong transmittermessage type detected. 1

628827 18082 pr prsp1mod.c Sp1: wrong transmitter port detected. 1

628828 18083 pr prsp1mod.c Sp1: wrong transmitter channel detected. 1

628829 18084 pr prsp1mod.c Sp1: wrong transmitter highway detected. 1

628830 18085 pr prsp1mod.c Sp1: wrong transmitter timeslot detected. 1

628831 18086 pr prsp1mod.c Sp1: wrong receiver message type detected. 1

628832 18087 pr prsp1mod.c Sp1: wrong receiver port detected. 1

628833 18088 pr prsp1mod.c Sp1: wrong receiver channel detected. 1

628834 18089 pr prsp1mod.c Sp1: wrong receiver highway detected. 1

628835 18090 pr prsp1mod.c Sp1: wrong receiver timeslot detected. 1

628836 18091 pr prsp1mod.c Sp1: wrong clock port detected. 1

628837 18092 pr prsp1mod.c Sp1: wrong clock channel detected. 1

628838 18093 pr prsp1mod.c Sp1: message type unknown. 1

628889 18094 pr prsp1mod.c SP1 port/channel/highway/slot information is not consistent 1

628890 18095 pr prsp1mod.c SP1 port/channel/highway/slot information is double not consistent 1

628891 18096 pr only SP! recInfo or only transInfo 1

628895 18097 pr prsp1 function called with wrong port-number 1

628896 18098 pr prsp1 B-Channel Informationm not accessible. 1

628897 18099 pr prsp1 invalid minor received 1

628898 18100 pr prdtmfsend unexpected minor received 1

628899 18101 pr prsp1mod IE too small 1

628900 18102 pr prsp1mod unexpected port information coding in the case of extension coding 1

628901 18103 pr prsp1mod unexpected (unknown) infoelement within sp1-message 1

628925 18104 pr prsp1dect.c Invalid portId and/or chanId in message from RBC 1

628926 18105 pr prsp1mod.c Invalid info element size 1

628927 18106 pr prsp1mod.c Invalid connection type 1

628928 18107 pr prsp1mod.c Invalid info element type 1

628937 18108 pr prsp1dect.c Bad channel pointer for the given port and chan 1

629143 18109 pr prsp1.c modadm did not find port and channel to switch the b-channel 1

629350 18110 pr prsp1.c Error connecting dtmf to dect terminal 1

629351 18111 pr prsp1.c Error re-establishing original dect connection after dtmf 1

629586 18112 pr prcomportattributes.cc trying to delete a port which still has a relation 1

629681 18113 pr prxs There is no Prima on this highway 1

629707 18114 pr prsp1dect.c dsp state A, still an assignement in local mirror. 1

629708 18115 pr prsp1dect.c dsp state B : not one assignement found in local mirror 1

629709 18116 pr prsp1dect.c dsp tries to go state C with same slot 1

629710 18117 pr prsp1dect.c dsp gos state C but no free channel found in local mirror 1

629711 18118 pr prsp1dect.c DSP on message received in state C or unknown state 1

629712 18119 pr prsp1dect.c dsp tries to deassign, but no assignement found in local mirror 1

629713 18120 pr prsp1dect.c channel to deallocate not found in local mirror 1

629714 18121 pr prsp1dect.c dsp state C, expected both channel assigned in local mirror 1

629715 18122 pr prsp1dect.c dsp state C, channel to deallocate not found in local mirror 1

629716 18123 pr prsp1dect.c dsp tries to deallocate in state A or undef state 1

629736 18124 pr prtna An invalid state was selected for the analog port. 1

629783 18125 pr prchserver The wrong b channel was requested 1

629784 18126 pr prchserver The b channel was not idle 1

629863 18127 pr prchserver.cc PortBChan pointer returned is NULL - Cannot dereference a NULL pointer. 1

630053 18128 pr prmasynchbridge.cc Error Mapping PrTbxMenuEnuC to MaTbxMenuEnuC - undefined value 1

630121 18129 pr prchserver.cc prCheckFreeBchan: got wr invalid start and/or stop-channel as parameter ! 1

630140 18130 pr prsp1.c There is no valid ConfRef for this conference 1

630475 18131 pr prmusmusic.cc Music not available. 1

630548 18132 pr prbchchserver.cc unknown interface type while channel setup 1

630591 18133 pr prbchl3.cc Undefined port type - do not know what to display (external or internal) 1

630783 18134 pr prana.cc Too many interrupts on analogue port or system is overloaded. This port is blocked for 5 seconds. 1

630784 18135 pr prana.cc No memory is left. 1

630785 18136 pr prana.cc Before R4.0: Timer is not expired. Else: Param3 = 0: Timer is already expired. Param1: Analogue port number. Param2: Minor = timer enum. Param3 = 1: Timer 3

637418 18137 pr prsp1dect.c No valid timeslot found for specified port and b-channel. 1

637419 18138 pr prsp1dect.c No valid portref found for specified port. 1

648062 18139 pr prbchchserver.cc For this portref was already allocated a channel or several channels. But we can't recover it because we don't know the old "PortInterfaceType". That means we are "losing" 1

662216 18140 pr prana.cc incorrect parameter in dtmf sign received from switching 1

668346 18141 pr prsp1dect.c This is not a real error. This is only to log if that special case can happen (Br27424). 1

670571 18142 pr pranatna.cc Generic error ID for pranatna.cc. Parameter 1: Error location: See code, Parameter 2: value, Parameter 3: value. 4

681082 18143 pr pranasimplefskonhooktransmgrc.cc Fsk transmitter request failed. Parameter 1: Value 0: Signal timeout from Rm. Value 1: No transmitters available from Rm. Value 2: Got no transmitter from Cr/Hd. Value 3: Signal 5

683678 18144 pr pranaasa.cc FSK receiver request failed. Parameter 1 with value 0: signal timeout, with value 1: no transmitters available, with value 2: got no transmitter from Hd. 1

685606 18145 pr prbchactivebcsrefc.cc Undefined porttype resolved for the indication of a external, or internal call on the PBX LED display. -> Nothing displayed. Parameter1: pref, Parameter2: channelNr, Parameter3: 1

685607 18146 pr prbchactivebcsrefc.cc Undefined porttype resolved for clearing the indication of a external, or internal call on the PBX LED display. -> Nothing cleared on the display. Parameter1: pref, Parameter2: 1

685608 18147 pr prbchportc.cc Undefined PortInterfaceType received for the initialisation of the b-channel administration data structure, from PrBchServerC::setChannelAdm(). This port gets no B-channel 1

685610 18148 pr prbchserverc.cc The sref index table could not be updated. Index (sref) not found, or object reference does not match. Parameter1: sref, Parameter2: bcsref, Parameter3: pref 3

685611 18149 pr prbchserverc.cc The sref index table could not be updated, because none of both entrys (bcsrefs) are in use. Parameter 1: sref 2

685614 18150 pr rm/rmbchserverc.cc Attempt to allocate a B-channel with a bcsref which has already a B-channel allocated! The parameters refer to the pref/chan which are already allocatd. Parameter1: bcsref, 4

685615 18151 pr prbchserverc.cc Ivalid start/stop B-channels passed for the B-channel selection on a primary T2 port. Parameter1: startCh, Parameter2: stopCh, Parameter3: pref 2

685617 18152 pr prbchserverc.cc Invalid stop B-channel passed for the B-channel selection on a non primary port. Parameter1: startCh, Parameter2: stopCh, Parameter3: pref 2

686220 18153 pr pr/prbchserverc.cc One B-channel resource reservation has been released by the garbage collection in idle state. This channel has not been released in the B-channel administration at the end of the 2

688370 18154 pr pranacongestiontonedetc.cc Reserve congestion tone detector resources request to local Rm timed out. Parameter 1: Analog port, Parameter 2: 0, Parameter 3: 0. 2

688371 18155 pr pranacongestiontonedetc.cc Switching request: allocate congestion tone detector. Response from Cr timed out. Parameter 1: Analog port, Parameter 2: On/Off flag, Parameter 3: 0. 2

688372 18156 pr pranacongestiontonedetadmc.cc Congestion tone detector connect request: inAnalogPort owns already a requst managed by this administration! disconnectDetector must have been missed. -> Recover before 2

688373 18157 pr pranacongestiontonedetadmc.cc The congestion tone detector queue could not be rotated. No resource available, altough we have just freed/disconnected one resource. Parameter 1: AnalogPort of the waiting 2

688641 18158 pr pranacongestiontonedetc.cc Congestion tone detector DSP resource couldn't be connected by Cr although Rm successfully reserved resources! Parameter 1: Analog port, Parameter 2: 0, Parameter 3: 0. 2

690107 18159 pr pranaconfiguration.cc Parameter0 = 0: Can't destroy the AnalogAlertingSignal object. Parameter0 = 1: Can't create the AnalogAlertingSingal object. Parameter2: Id of SmLocale. 1

690389 18160 pr pranaconfiguration.cc Failed to create PrAnalogAlertingSignal instance 1

690390 18161 pr pranaconfiguration.cc No SmLocale instance found when instantiating PrAnalogAlertingSignal. 2

690936 18162 pr prbchserverc.cc A hanging entry in the srefTable has been found and released by the garbage collection in idle state. This should never occur, and indicates a problem inside the B-channel 2

699383 18163 pr pr/prbchportc.cc PrBchPortC::allocCh(): The selected pref/chan is not idle, parameters refer to the already allocated channel: Parameter1: bcsref, Parameter2: pref, Parameter3: B-channel number 2

699387 18164 pr pr/prbchserverc.cc PrBchServerC::allocCh(): B-channel allocation failed, parameters refer to the parameters passed to this method: Parameter1: bcsref, Parameter2: pref, Parameter3: B-channel 1

704177 18165 pr prana.cc

We missed the response signal of RM resource reservation. It seems that the timeout of osOseReceiveSigTmo function is too short. The reservation of this RM resource is freed

again if the reservation was successful. Param 1: RmResourceTypeEnu; Param 2: 0 = reservation successful, 1 = no reservation; Param 3: 0. 2

704196 18166 pr pranatna.cc Allocation or deallocation of the dtmf resource isn't reentrant. We have to use semaphores. This ErrorId was removed in r4.0. 2

705999 18167 pr pranasharedfskonhooktransmgrc.cc Fsk transmitter request failed. Parameter 1: Value 0: Signal timeout from Rm. Value 1: No transmitters available from Rm. Value 2: Got no transmitter from Cr/Hd. Value 3: Signal 4

706030 18168 pr pranasharedfskonhooktransmgrc.cc Create Fsk transmitter announcement failed. Parameter 1: Bugreport index Parameter 2: Calling Bcs reference Parameter 3: - 4

709641 18169 pr pranafskonhooktransmgrc.cc getSharedFskOnHookTrans() failed. Param 1: Error location Param 2: bcsref value Param 3: 0 1

717018 18170 pr prana.cc

This minor isn't available in the switch of the function prAnaHighLayerEvent(). Param3 = 2: OsLibDeviceSynchFacadeC::receiveSigTmo() expired. Signal was received in

handleSig() of the process. Param1: Minor Id, Param2: Analogue port index. Param3 = 1: Unknown Minor. Param1: Minor Id, Param2 = 0. 3

739773 18171 pr prana.cc The port reference to analogue port conversion failed. Parameter 1: Port reference (0xffff is Undef), Parameter 2: Absolute port (0xffff is Undef), Parameter 3: Error location: 0 2

739779 18172 pr prana.cc The port reference to analogue port conversion failed. Parameter 1: Port reference (0xffff is Undef), Parameter 2: Absolute port (0xffff is Undef), Parameter 3: Error location: 0 2

739811 18173 pr pranaasa.cc Analogue trunk: Clip received: "Wrong checksum". Data transmission format has wrong checksum. Clip isn't shown. Parameters show file. 1

739812 18174 pr pranaasa.cc Analogue trunk: Clip received: "CLI checks not ok". Wrong message type or message length. Clip isn't shown. Look up the parameters in the file. 2

746458 18175 pr pranafskpacketsignalmgrc.cc Analogue hotel terminal FSK packet signalling failed. Parameter 1: Port reference(0xffff is Undef). Parameter 2: Analogue port number. Parameter 3: Error location. 2

769668 18176 pr pranatna.cc


"MinImpTimeMs" can't be converted from char to UInt16. =2: Attribute "MinImpTimeMs" can't be found in the localisation file. =3: Attribute "LargeMinImpTimeMs" can't be

converted from char to UInt16. =4: Attribute "LargeMinImpTimeMs" can't be found in the localisation file. =5: Attribute "MaxImpTimeMs" can't be converted from char to UInt16.

=6: Attribute "MaxImpTimeMs" can't be found in the localisation file. =7: Attribute "MinPulseTimeMs" can't be converted from char to UInt16. =8: Attribute "MinPulseTimeMs"

can't be found in the localisation file. =9: Attribute "MinBreakTimeMs" can't be converted from char to UInt16. =10:Attribute "MinBreakTimeMs" can't be found in the localisation

file. =11:Attribute "MinHookOffTimeMs" can't be converted from char to UInt16. =12:Attribute "MinHookOffTimeMs" can't be found in the localisation file. =13:Attribute 3

770067 18177 pr pranaasa.cc


"ImpulseDiallingSpaceMs" can't be converted from char to UInt16. =2: Attribute "ImpulseDiallingSpaceMs" can't be found in the localisation file. =3: Attribute

"ImpulseDiallingMarkMs" can't be converted from char to UInt16. =4: Attribute "ImpulseDiallingMarkMs" can't be found in the localisation file. =5: Attribute "DtmfToneMs" can't

be converted from char to UInt16. =6: Attribute "DtmfToneMs" can't be found in the localisation file. =7: Attribute "DtmfBreakMs" can't be converted from char to UInt16. =8:

Attribute "DtmfBreakMs" can't be found in the localisation file. =9: Attribute "LoopCurrentDetectionMs" can't be converted from char to UInt16. =10:Attribute

"LoopCurrentDetectionMs" can't be found in the localisation file. =11:Attribute "DialToneDetectionMs" can't be converted from char to UInt16. =12:Attribute

"DialToneDetectionMs" can't be found in the localisation file. =13:Attribute "RingBackToneDetectionMs" can't be converted from char to UInt16. =14:Attribute

"RingBackToneDetectionMs" can't be found in the localisation file. =15:Attribute "RingStartDetectionMs" can't be converted from char to UInt16. =16:Attribute 5

772939 18178 pr pranatna.cc

The possible flash length (100,200,300,400,600,900ms) of the Aastra 6730a/6710a terminal doesn't fit in the flash range of the PBX. Parameter 1: Selected flash length [ms] for

the Aastra 6730a/6710a terminal. Parameter 2: Flash minimum length detection of the PBX [ms]. Parameter 3: Flash maximum length detection of the PBX [ms]. 1

776581 18179 pr pranaintasynchfacadec.cc OslibDeviceSynchFacadeC::receiveSigTmo(2000ms) expired. param1: Minor Id. param2: Analogue port index. param3: Error report number. 2

776780 18180 pr pranaasa.cc

Warning during impulse dialling on the analogue trunk port. Parameter 3 = 0: prAsaImpDialProc doesn't know this minor. Parameter 1: Minor. Parameter 2: Analog port id.

Parameter 3 = 1: prAsaImpDialProc doesn't know this major. Parameter 1: Major. Parameter 2: Analog port id. Parameter 3 = 2: prAsaImpDialProc: Timer already expired..

Parameter 1: 0. Parameter 2: Analog port id. Parameter 3 = 3 or 4: prAsaImpDialProc doesn't exit for impulse dialling. Parameter 1: ProcId. Parameter 2: Analog port id. 8

776863 18181 pr pranatna.cc Too many interrupts on analogue subscriber port. This port is blocked for 5 seconds. Parameter1: Analogue port index. Parameter2: Number of interrupts Parameter3: During 2

779381 18182 pr pranaasa.cc DTMF decoder allocation for CLIP detection failed. 1

628026 20001 swit crpgppatterngen.c Unknown OSE signal received in General Call Bell Process -> Unknown Major or Minor signal part! 1

628029 20007 swit crrelais.c Impossible relais number. 1

628030 20008 swit crdnwswitch.c Impossible enumeration parameter for function call. 1

628031 20010 swit crcbmbellqueue.c To many jobs in general call queue. 1

628032 20011 swit crcbmbellqueue.c Unknown general call code. 1

628033 20012 swit crcbmbellqueue.c No more jobs in general call queue. 1

628052 20014 swit crvtcswitch.c Unknown fix rhythm or tones to generate 1

628053 20015 swit crvtcswitchbcs8.c Unknown tone to connect to subscriber 1

628054 20017 swit crpr.c Unknown bcsref in domain cr timeslot administration for diconnect tone 1

628065 20029 swit crpr.c Wrong BcsRef to release the timeslot used in a point-point connection 1

628066 20030 swit crpr.c The function can not change the value of the oldBcsref because it doesn`t exist 1

628067 20031 swit crtimeslotadm.c The function has not allocated the ring of the crSlotAdm for the passed portref and bchan, at the initialization time 1

628068 20032 swit crtimeslotadm The timeslot for the passed portref and bchan, has not been allocated in the crBcsrefActiv list 1

628071 20034 swit crcnfconfadm.c Parameter missmatch for building a conference 1

628072 20035 swit crcnfconfadm.c No free conference reference for building a new conference 1

628073 20039 swit crcnfconfadm.c Conf. member not hold -> Bcs ref not found in conference adm. 1

628074 20040 swit crcnfconfadm.c Unknown conference type to switch 1

628075 20041 swit crcnfconfadm.c No correct HW switching for rebuilding a conference 1

628076 20042 swit crcnfconfadm.c Subsriber is not free for building a call waiting conf. 1

628077 20043 swit crcnfconfadm.c No free conference reference for building a call waiting conf. 1

628078 20052 swit crpr.c One of the two subscr. for Call Wait does'nt exist in timeslot adm. 1

628081 20054 swit crvtcswitchbcs8.c Unknown One Way situation to disconnect 1

628082 20062 swit crvtcswitchbcs8.c Unknown combination of ports for creating a conference 1

628083 20063 swit crvtcswitchbcs8.c Unknown combination of ports for deleting a conference 1

628084 20064 swit crcnfconfadm.c No free conference reference for building a new Intrusion conf. 1

628085 20066 swit crcnfconfadm.c A bcsref is not in the Ts adm. for creating a conference 1

628086 20067 swit crcnfconfadm.c Subsriber is not free for building an intrusion conf. 1

628092 20068 swit crcnfconfadm.c Conferece garbage clear found a active conference or corrupted conf. datas 1

628093 20069 swit crgrbclear.c Fatal error in the timeslot administration 1

628106 20070 swit crhrsswitch.c A subscriber for switch two way is not in domain cr timeslot adm. 1

628107 20071 swit crhrsswitch.c Unknown bcsref in domain cr timeslot adm. for announcing situation 1

628108 20072 swit crhrsswitch.c Timeslot switching for announcing is not possible 1

628109 20073 swit crhrsswitch.c A subscriber for switch one way is not in domain cr timeslot adm. 1

628110 20074 swit crhrsswitch.c Unknown type of function to disconnect OneWay 1

628111 20075 swit crhrsswitch.c Unknown bcsref to disconnect OneWay 1

628112 20076 swit crhrsswitch.c A subscriber for disconnect two way is not in domain cr timeslot adm. 1

628115 20077 swit crhrsswitch.c Unknown bcsref in Cr timeslot adm. or tone or rhythm for switching tone 1

628116 20078 swit crhrsswitch.c Unknown conf. ref. in domain Cr conf. adm. or rhythm or tone for switching tone 1

628117 20079 swit crhrsswitch.c Unknown conference type for switching tones 1

628118 20081 swit crcnfconfadm.c For building a normal conference missing bcsref in timeslot adm. 1

628119 20082 swit crcnfconfadm.c For building a Call Wait conf. missing bcsref in timeslot adm. 1

628120 20083 swit crcnfconfadm.c For building an intrusion conf. missing bcsref in timeslot adm. 1

628121 20084 swit crcnfconfadm.c Not correct conference type for activate conference hold 1

628139 20085 swit crcsycourtesy.c invalid group or text number for courtesy text-time 1

628140 20086 swit crcsycourtesy.c invalid group or text number for courtesy text-time 1

628141 20087 swit crhrshistory.c This history state is not handled in crHrsSetHistorySP() 1

628142 20088 swit crhrshistory.c This history state is not handled in crHrsSetHistoryPP() 1

628143 20089 swit crhrshistory.c This history state is not handled in crHrsSetHistoryMP() 1

628144 20090 swit crhrsswitch.c Unknown bcsref in domain cr timeslot adm. for rhythm generate 1

628145 20091 swit crhrsswitch.c Unknown rhythm to generate for the subscriber 1

628146 20092 swit crhrsswitch.c Unknown bcsref in domain cr timeslot adm. for hold situation 1

628147 20093 swit crhrsswitch.c Subscriber disconnect error for hold situation 1

628148 20094 swit crhrsswitch.c For unknown conference type no conf resouce check is possible 1

628149 20095 swit crhrsswitch.c For deleting a conference the subsriber is not known in the conference administration 1

628150 20096 swit crhrsswitch.c For deleting a conference the subsriber is not known in the conference administration 1

628151 20097 swit crhrsswitch.c Unknown member in conference for deleting the conference 1

628152 20098 swit crhrsswitch.c For unknown conference type no conference switching is possible 1

628153 20099 swit crhrsswitch.c No correct HW switching for building a new conference 1

628155 20100 swit crcsycourtesy.c unknown or wrong courtesy state in the cr-state-machine 1



628158 20103 swit crcsycourtesy.c stop recording of a not actual bcsRef 1


628160 20105 swit crcsycourtesy.c stop playing of a not actual bcsRef 1

628161 20106 swit crcsycourtesy.c unknown courtesy state in the cr-state-machine 1


628163 20108 swit crcsycourtesy.c unknown minor 1





628168 20113 swit crhrsswitch.c Timeslot switching for Courtesy play is not possible 1

628169 20114 swit crhrsswitch.c Unknown bcsref in Cr timeslot adm. for Courtesy play situation 1

628170 20115 swit crhrsswitch.c Timeslot switching for Courtesy music recording is not possible 1

628171 20116 swit crhrsswitch.c Timeslot switching for Courtesy recording is not possible 1

628172 20117 swit crhrsswitch.c Timeslot switching for Courtesy play is not possible 1

628173 20118 swit crhrsswitch.c Unknown bcsref in Cr timeslot adm. for Courtesy record situation 1

628174 20119 swit crpgppatterngen.c Wrong signal Minor for timeout -> ignore the signal 1

628175 20120 swit crpgppatterngen.c Wrong signal Minor for general call -> ignore the signal 1

628176 20121 swit crcbmbell.c Unknown ring code : No General Call Bell activation 1

628177 20122 swit crpgppatterngen.c Wrong signal Minor for courtesy -> ignore the signal 1

628196 20123 swit crplatform.c There is an external board in a wrong position (Es: Exa12 in LEFT pos.) 1

628473 20124 swit crdtmf.c Unable to allocate signal 1

628474 20125 swit crdtmf.c ANALOG is switched out 1

628475 20126 swit crdtmf.c DTMF decoder number is invalid 1

628476 20127 swit crdtmf.c Invalid port number 1

628477 20128 swit crdtmf.c Invalid port number 1

628478 20129 swit crdtmf.c Invalid module 1

628479 20130 swit crdtmf.c DTMF decoder number is invalid 1

628480 20131 swit crdtmf.c Invalid LTA boardType 1

628481 20132 swit crdtmf.c The DTMF decoder is not assigned 1

628482 20133 swit crdtmf.c The DTMF decoder is not assigned 1

628483 20134 swit crdtmf.c This dummy routine should never be called 1

628538 20135 swit crdtmf.c Unable to switch musac for dtmf-receiver. 1

628625 20136 swit crpgpdtmfsend.c unexpected minor received 1

628626 20137 swit crpgpdtmfsend.c error allocating memory (out of memory, oseAlloc has returned NULL) 1

628627 20138 swit crpgpdtmfsend.c job received, but root pointer is not initializes 1

628850 20139 swit crvtcswitchzee.c Dect sync signal could not be switched to the MUP of bcs64 1

628851 20140 swit crvtcswitchzee.c MUP of bcs64 is unknown 1

629187 20141 swit crcsycourtesy.c too big groupnumber for a courtesy-start 1

629188 20142 swit crcsycourtesy.c corrupted queue. illegal bcsRef. not active bcsRef 1

629218 20143 swit crvtcswitchzee.c Tone for this country could not be allocated. 1

629238 20144 swit crcnfconfadm.c Function getConfSlot: confP is pointer to NULL 1

629314 20145 swit crvtcswitchmup3.c Unknown Option Module detected by MUP3 VTC 1

629315 20146 swit crvtcswitchmup3.c Failed to Create IOM Timeslot pool 1

629316 20147 swit crvtcswitchmup3.c Failed to Allocate IOM Timeslot 1

629317 20149 swit crvtcswitchmup3.c Failed to determine IOM Timeslot for given Port/BCh 1

629318 20150 swit crvtcswitchmup3.c Failed to Deallocate IOM timeslot 1

629319 20151 swit crvtcswitchmup3.c Disconnect (VtcWrite) Not yet implemented for MUP3 1

629320 20152 swit crvtcswitchmup3.c Failed to Allocate Dummy PCM timeslot (VTC-MUP3) 1

629321 20153 swit crvtcswitchmup3.c MUP3 Conference - ZFK Connect Error 1

629322 20154 swit crvtcswitchmup3.c MUP3 Conference - Disconnect - Member Not found in conf list 1

629323 20155 swit crvtcswitchmup3.c MUP3 Conference - Zfk Disconnect Error 1

629324 20156 swit crvtcswitchmup3.c MUP3 Conference - Zfk Conf with Tone Error 1

629325 20157 swit crvtcswitchmup3.c MUP3 - Zfk Connect with Tone Error 1

629326 20158 swit crvtcswitchmup3.c MUP3 - Zfk Connect Error 1

629381 20159 swit crvtcswitchmup3.c If error converting a Hw and Ts combination into a Bcsref 1

629687 20160 swit crtimeslotadm.c rangecheck with handling of Highway and Timeslot 1

629688 20161 swit crtimeslotadm.c deallocation of a slot which was not allocated 1

629689 20162 swit crtimeslotadm.c allocation of a slow which is not free 1

629806 20163 swit crvtcswitchstar.c In function sendDtmfSignToXa, no correct portref has been found 1

629807 20164 swit crvtcswitchstar.c In function sendDtmfSignToXa not expected dtmfSign 1

630001 20165 swit crswitchcont.cc a command issued from high layer, is not implemented (known) 1

630004 20166 swit crswitchmon.cc array end of string overwritten 1

630060 20167 swit crmasynchbridge.cc Error Mapping CrTbxMenuEnuC to MaTbxMenuEnuC - undefined value 1

630084 20168 swit crtimeslotadmstar should never reach here with more than 1 Dtmf Decoder in use 1

630116 20169 swit crxasynchbridge.cc failed to map CrMonTestFlagEnu to XaMonTestFlagEnu 1

630145 20170 swit cracedectc.cc There is a resource problem. 3

630146 20171 swit craceswitch.cc tmo should be stopped at this position 1

630152 20172 swit crcsycourtesy.c unknown courtesy play mode 1

630153 20173 swit crcsycourtesy.c invalid group for courtesy play mode 1

630167 20174 swit cracedectc.cc there is a dsp problem 1

630186 20175 swit crtimeslotadmstar.c It is not possible to have more than 3 Dect channels 1

630248 20176 swit cracmconference.cc Could not deallocate an allocated DSP resource 1

630249 20177 swit cracmconference.cc Could not disconnect a connected DSP resource 1

630250 20178 swit cracmconference.cc Could not connect an allocated dsp resource 1

630251 20179 swit cracmconference.cc The DSP resource looks like it is no longer allocated, and an attempt was make to alter the resource without it being allocated. 1

630252 20180 swit crconconnectionc.cc An attempt was made to add or remove a party from a conference which was not connected 1

630253 20181 swit cracmcallwaitingc.cc Could not deallocate an allocated DSP resource 1

630254 20182 swit cracmcallwaitingc.cc Could not disconnect an allocated DSP resource 1

630255 20183 swit cracmcallwaitingc.cc Could no connect an allocated DSP resource 1

630256 20184 swit cracmintrusionc.cc Could no connect an allocated dsp resource 1

630257 20185 swit cracmintrusionc.cc Could no deallocate an allocated DSP resource 1

630258 20186 swit cracmintrusionc.cc Could not disconnect an allocated dsp resource 1

630259 20187 swit cracsc.cc Unexpected conference tone configuratio 1

630262 20188 swit cracead2c.cc The handsfree state is unexpected 1

630263 20189 swit craceswitchc.cc There was an error with the handsfree request, this situation should never occur 1

630264 20190 swit craceswitchc.cc The handsfree state is unexpected 1

630265 20191 swit crhandsfreec.cc There was an error with the handsfree request, this situation should never occur 1

630381 20192 swit cracedectc.cc conflict in commandes 1

630382 20193 swit crconmgrc.cc ace obj is in a strange state 1

630396 20194 swit craceswitchc.cc Dtmf receiver functionality is not implemented for this port type. 1

630397 20195 swit crconcontc.cc No dtmf receiver available. 1

630429 20196 swit criomadmin.cc iom admin deals with wrong parameter...... 1

630430 20197 swit craceswitchc.cc Mute functionality is not implemented for this port type. 1

630451 20198 swit cracead2c.cc Attempted to mute a connection which wasn't connected. This is controlled by the TP domain 1

630452 20199 swit cracead2c.cc attempted to unmute a connection which was already connected. This is controlled by the TP domain. 1

630453 20200 swit cracead2c.cc Attempted to start mute, but mute was already started. 1

630454 20201 swit cracead2c.cc Attempted to unmute a connection which wasn't muted 1

630455 20202 swit crcsyconconnection.cc A switching command called from courtesy failed 1

630487 20203 swit craceanalogc.cc No dtmf transmitter available. Dtmf digit is lost that means the dialling is wrong! 1

630495 20204 swit crcsycourtesy.cc One of the courtesy switching commands failed 1

630514 20205 swit craceswitchc.cc Handsfree was already active when startHandsfree requested 1

630515 20206 swit craceswitchc.cc Handsfree was already inactive when stopHandsfree requested 1

630614 20207 swit crconmgrc.cc A Conference connection was explicitly activated by higher layers 1

630615 20208 swit crconmgrc.cc A Conference connection was explicitly deactivated by higher layers 1

630622 20209 swit crconmgrc.cc problem with the connection id 1

630640 20210 swit crconmgrc.cc switch object was not allocated 1

630641 20211 swit craceswitchc.cc Switch object has already assigned a connection id. P1: read or write owner, connection id which actually uses the switch object P2: connection id which wants to manipulate the 2

630650 20212 swit crconmgrc.cc The ConnectionId in the connection list does not match the Id given 1

630688 20213 swit cracedectc.cc Dect: Wrong ACE state to connect a tone. 1

630762 20214 swit crpgpdtmfc.cc No dtmf job is active, tmoCtr should be 0 (zero). 1

630989 20215 swit craceisdnc.cc Invalid ISDN port type for ISDN ACE p1: portref p2: channel p3: 0 2

630990 20216 swit crdspmonproc.cc Incorrect signal received, signal ignored 1

630991 20217 swit crmonswitchmonc.cc Incorrect signal received, signal ignored 1

630992 20218 swit cr*.cc Switching error, incorrect state or parameters 1

631101 20219 swit crdspresourcec.cc Not enough mips for required resource Resource ID, Remaining Cycles, Required Cycles 1

631147 20220 swit crplatform.c time slot range exceeded. 1

631184 20221 swit craceaipc.cc Handsfree functionality is not implemented for this port type. 1

631185 20222 swit craceaipc.cc B Channel cannot be manipulated for this port type 1

631186 20223 swit craceipc.cc DTMF signs cannot be transmitted for this port type / 1

631187 20224 swit craceaipc.cc Tones are not available for this port type 1

631188 20225 swit craceswitchc.cc IP information does not exist for this port type 1

631189 20226 swit crswiswiobjc.cc Cannot configure IP settings for this switch object 1

631196 20227 swit crconmgrc.cc Cannot close a closed connection withing the connection manager. Parameters contain no information. 2

631197 20228 swit crconmgrstatec.cc Could not create a local connection. P1: Connection Id, P2: no information (0), P3: no information (0). 3

631198 20229 swit crconmgrc.cc Failed to receive a response from CR in another node 1

631199 20230 swit crconmgrc.cc Failed to receive a response from MR 1

631200 20231 swit crconmgrc.cc Error creating object for satellite 1

631201 20232 swit crconmgrc.cc Incorrect State change for satellite 1

631217 20233 swit crdspdatac.cc Unknown Module encountered. Exiting function 1

631240 20234 swit crdspdatac.cc length of CallerIdMsg to long Not used anymore. It can be deleted if this tool has implemented that feature. 2

632077 20235 swit crdspman.cc The DSP failed to respond to the last three requests with a receive acknowledge. This indicates that the DSP is no longer responding. The dsp and all his resources has been shut 1

633626 20236 swit cracedectc.cc idle timeslot is not disconnected !! 1

635397 20237 swit cracehdlcc.cc Tone variable is set. it is not allowed to switch tones for hdlc port. 1

636456 20238 swit cracec.cc a dummy interface implementation has been called. The ace has unexpected type 1

643289 20239 swit crmain.c Unknown signal minor for voice services (MajorVoice). 1

643290 20240 swit crvocmain.c Invalid text number for this voice group. 1

643291 20241 swit crvocmain.c Unknown or wrong state in the voice channel state machine. 1

643292 20242 swit crvocmain.c Could not find the text id for the requested voice group/text. 1

643293 20243 swit crvocmain.c Unknown voice hardware module or module not available. 1

643294 20244 swit crvocmain.c Should not recive this signal for this hardware. 1

643295 20245 swit crvocmain.c Request to start courtesy service with invalid voice group. 1

643296 20246 swit crvocmain.c Invalid play mode for this voice group. 1

643297 20247 swit crvocmain.c No play mode selectable for this voice group 1

643298 20248 swit crvocmain.c Attempt to stop recording of a non active bcsRef. 1

643301 20249 swit crvocmessages.c Invalid text number for this voice group. 1

643304 20250 swit crvocmessages.c Unknown or unexpected voice group. 1

643305 20251 swit crvocmessages.c Invalid voice text id. 1

643306 20252 swit crvocmessages.c Invalid voice text number. 1

643307 20253 swit crvocmessages.c Not able to allocate a new voice text id. 1

643528 20254 swit crvocmessages.c Unknown or unexpected voice module type. 1

643545 20255 swit crvocmessages.c No voice text id defined for requested voice group and voice text. 1

644288 20256 swit crvocmain.c Unknown voice service. 1

644290 20257 swit crvocmain.c Invalid voice channel - Voice resources may possibly not be deallocated! 2

646941 20258 swit crvocmessages.c Invalid or unknown text type. 1

647817 20259 swit crmonswitchmonc.cc Could not close the directory stream. This could end with a crash because of missing detaches. 1

647819 20260 swit crmonswitchmonc.cc Could not write the date/time in the file name. 1

647834 20261 swit crmonswitchmonc.cc File could not be removed. 1

648262 20262 swit crvocmain.c Invalid command for this hardware. 1

648265 20263 swit crvocmain.c Attempt to stop voice service for an invalid or inactive bcsRef - voice resources may possibly not be deallocated. 3

648442 20264 swit crvocmain.c Should always find a further voice mail message in this state. 1

648528 20265 swit crvocmain.c Deleting an already deleted text. 1

648546 20266 swit craceanalogc.cc undefined process identifier could not send dtmf sign 1

648665 20267 swit crvocmain.c function sendMessageToXa is called with a Non-Valid parameter 1

649023 20268 swit crvocmessagepool.c Voice Memory - Erasing voice text failed. 1

649024 20269 swit crvocmessagepool.c Voice Memory - Copying voice text failed 1

649029 20270 swit crvocmessagepool.c Voice Memory - Unknown Voice Copy Return Code 1

651797 20271 swit crvocmailbox.c invalid mailbox 1

651826 20272 swit crvocmain.c Invalid hardware channel - Voice resources may possibly not be deallocated 1

651829 20273 swit crvocmain.c Unknown or unexpected courtesy play mode 2

651832 20274 swit crvocmain.c Unknown or unexpected voice service stop cause 2

652324 20275 swit crvocmessagepool.c Voice memory low. 2

653203 20276 swit crvocmain.c Queuing voice service requests for this type of voice text is not supported. 1

653251 20277 swit crvocmain.c Switching to tone, music or silence after listening courtesy text in hold failed. 2

653261 20278 swit crvocmain.c Switching to tone or music after listening courtesy text failed. 1

653263 20279 swit crvocmain.c Unknown switching type for courtesy. 1

653264 20280 swit crvocmain.c Corrupted queue, invalid bcsRef or inactive bcsRef 1

653425 20281 swit crvocmain.c Should not get into this state with a bcsRef != 0 1

653426 20282 swit crvocmain.c Should not get into this state with bcsRef == 0 or bcsRef == NonValidBcsRef 1

653535 20283 swit crvocmain.c Unknown or invalid courtesy service type 1

654292 20284 swit crconmgrc.cc garbage collector has identified a remaining connection. The connection will be killed 1

654293 20285 swit crconmgr.cc garbage collector has identified a remaining switch object. it will be deleted 1

654673 20286 swit crvocmessages.c Did not find valid start address for next voice text. 1

654729 20287 swit crvocmain.c Voice Memory - Recording voice failed. 1

654730 20288 swit crvocmain.c Voice Memory - Deleting voice failed. 1

654731 20289 swit crvocmain.c Voice Memory - Playing voice failed. 1

655156 20290 swit crconmgrstatec.cc switching situation ckeck failed (asserts replaced by errorReport) need to have e switching trace to analyse this situation 1

655171 20291 swit crconmgrstatec.cc assert replaced by errorReport. a value does not fit to present situation. switching trace needed, as the real problem needs to be searched in an earlier switching acivity 1

655556 20292 swit cracec.cc parameter channel out of range. this might cause serious switching problems 1

656208 20293 swit crconmgrstatec.cc wrong route provided to connectTwo way. Now we have 3 nodes used!!?? p1: inRouteId p2: inContextP->getNumOfNodes() p3: inContextP->getConnId() 2

658595 20294 swit crswicontc.cc unexpected signal received 1

658797 20295 swit crcsymgrc.cc Courtesy setting is not available for this csy group. 2

660175 20296 swit crconmgrstatec.cc addToConnection: nodeId of new obj does not match any nodeId of the route 1

660305 20297 swit crconh2mtimeslotc.cc can not reserve timeslot, is already occupied 1

660306 20298 swit crconh2mtimeslotc.cc tried to free a slot which was not allocated (reserved slot) 1

660307 20299 swit crconh2mtimeslotc.cc tried to free a slot which was not allocated 1

661307 20300 swit crmgrmusiconholdc.cc Not able to send the music on hold settings to the Satellite. The linkhandler could not send the signal. 1

661347 20301 swit crmgrmusiconholdc.cc Not able to create a persistant music on hold object. 1

662200 20302 swit crmgrmusiconholdc.cc Could not close the directory stream. This could end with a crash because of missing detaches. 1

662202 20303 swit crmgrmusiconholdc.cc No valid file found for music on hold. 1

662203 20304 swit crmgrmusiconholdc.cc Could not remove music on hold wave file. 1

662204 20305 swit crmgrmusiconholdc.cc Could not rename music on hold wave file. 1

662206 20306 swit cracedectdrvc.cc dect port channel is not yet available 1

664027 20307 swit cracertpswitchc.cc Handsfree functionality is not implemented for this port type. 1

664028 20308 swit cracertpswitchc.cc B Channel cannot be manipulated for this port type 1

664857 20309 swit crdspinterfacec.cc DSP interrupt did not receive wave data in time for playback. Playback has been stopped. 1

666056 20310 swit craceanalogc.cc No valid port pointer found in the Init function of an ACE. Param 1 is the AbsPort, Param 2 is the found pointer (the casted pointer is NULL). Param 3 is 0. Of course this should 1

669406 20311 swit crvocmailbox.c Not able to find the mailbox to delete. 1

669539 20312 swit crdspdatac.cc No process id for this alert tone detector. 1

669540 20313 swit crdspdatac.cc No process id for this alert tone decoder. 1

669541 20314 swit crdspdatac.cc No process id for this Fsk receiver. 1

669542 20315 swit crdspdatac.cc No process id for this Fsk sender. 1

669657 20316 swit crvocmain.c Attempt to stop greeting for an invalid or inactive bcsRef. Voice resources may possibly not be deallocated. 1

669728 20317 swit crvocmain.c Didn't find a valid mailbox for the active channel. 1

670362 20318 swit craceaudioplayerc.cc

The wave player suddenly is stoppped because of a problem of the file system or dsp interface. We have to start again 'music on hold' because of the bugreport BR31713 (After a

few days music on hold doesn't work). p1: port reference p2: b-channel p3: 1: moh was playing; 0: moh was not playing (at restart) 2

670594 20319 swit crvocmain.c Auto Attendant: No action from Xa after end of greeting. 1

670598 20320 swit crvocmain.c Auto Attendant: Should not receive "SetVoicemailIdle" signal in this state (collision). 1

671122 20321 swit crvocmain.c Signal has been delayed several times but still did not receive expected signal from hardware. Param1: minor of delayed signal Param2: channel state Param3: channel stop 2

671164 20322 swit crvocmain.c Unknown response form function checkDelaySignal. Param1: minor of signal to delay Param2: channel state Param3: channel stop cause 1

680084 20323 swit crdspinterfacec.cc CrDspInterfaceC::getResourceCount() recived a response with a wrong slotId and/or a wrong dspId. Parameter1: slotId Parameter2: dspId 1

680186 20324 swit cracec.cc Fsk demodulator, Fsk modulator or dualtone alerting signal generator isn't implemented for this derived class type. Parameter0 port reference. Parameter1 channel. 4

680998 20325 swit crdspdatac.cc A DSP has detected a TDM error. Param1: DSP ID Param2: Highway Param3: TDM error ID 1

691023 20326 swit crdspdatac.cc Failed to allocate virtual timeslot 1

692802 20327 swit cracedetc.cc Unexpected switching state in function dis/connectRxTs or dis/connectTxTs. Param0 : myState, Param1 : id, Param2 : which errorReport with same Error ID. 1

692806 20328 swit craceaudioplayerc.cc Unexpected switching state in function dis/connectRxTs or dis/connectTxTs. Param0 : myState, Param1 : id, Param2 : which errorReport with same Error ID. 1

692807 20329 swit craceipphonec.cc Unexpected switching state in function dis/connectRxTs or dis/connectTxTs. Param0 : myState, Param1 : id, Param2 : which errorReport with same Error ID. 1

692808 20330 swit cracertpswitchc.cc Unexpected switching state in function dis/connectRxTs or dis/connectTxTs. Param0 : myState, Param1 : id, Param2 : which errorReport with same Error ID. 1

692878 20331 swit crconmgrstatec.cc

Build a way point failed. A way point is used to connect 2 nodes in an AIN. The given port has to be of type SmPortInterfaceTypeC::Rtp (MBS/MBL/MBA) or

SmPortInterfaceTypeC::Aip (MBS/MBL). If this error log is raised, the type of the given port is wrong. p1: port ref p2: channel p3: port type (SmPortInterfaceTypeC) 1

694597 20332 swit crdspdatac.cc DSP doesn't provide the required amount of a resource. Param. 1: Resource type (CrDspResourceEnumC) Param. 2: Resource count on the DSP Param. 3: Required amount of this 1

696138 20333 swit crswicontc.cc CrSwiContC received MajorWdog signal with unexpected minor 1

696140 20334 swit crswicontc.cc Response to service request signal was received too late 1

701011 20335 swit crconh2mtimeslotc.cc H2M configuration can not be set. The number of H2M highways is not as excpected. p1: (UInt32)CrConH2mHighwaysMax p2: (UInt32)inHighwayConfig.numberOfH2mHighways 1

701012 20336 swit crconh2mtimeslotc.cc H2M configuration can not be set. The retrieved configuration is not valid. p1: (UInt32)CrConH2mHighwaysMax p2: (UInt32)inHighwayConfig.numberOfH2mHighways, p3: 1

701013 20337 swit crswicontc.cc H2M configuration could not be set. This could lead to noisy connections as reserved timeslots will be reused! p1: h2mHighwayConfigP 1

701014 20338 swit crswicontc.cc H2M configuration could not be retrieved from the hardware initialisation. This could lead to noisy connections as reserved timeslots will be reused! p1: h2mHighwayConfigP 1

702726 20339 swit crmonswitchmonc.cc Failed to write switching monitor log file. Data will be missing in the log files!! 1

705196 20340 swit crdspdatac.cc A DSP channel was not ready to handle a command. Parameters: 1: DSP Id, 2: DSP replyword 0, 3: DSP reply word 1. 1

705516 20341 swit crdspdatac.cc The requested number of VoIP/T.38 channels for one DSP exceeds the maximum defined in myMaxT38Processing resp. myMaxRTPProcessing (crdsptypes.hh). Parameter 1: 0 == 1

726536 20342 swit crmonswitchmonc.cc could not create directory to store switching trace files p1: errno p2: 1 - /home/logs could not be created 2 - /home/logs/swi could not be created p3: 0 1

731569 20343 swit mscumspmanager.cc MSCU VAPI init failed -> EIP1 modules can not be used Param1: VAPI Result Error Code Param1: - Param1: - 1

731576 20344 swit mscumspmanager.cc MSCU initDevice() error -> EIP1 modules can not be used EIP1 Port is invalid. Param1: HD Port Id Param1: - Param1: - 1

731577 20345 swit mscumspmanager.cc MSCU initDevice() error -> EIP1 modules can not be used EIP1 device ID is invalid! Param1: Hd Port Id Param1: EIP1 device ID (0..8) Param1: - 1

731578 20346 swit mscumspmanager.cc MSCU bootDevice() error -> EIP1 modules can not be used EIP1 boot or firmware download failed! Param1: Hd Port Id Param1: EIP1 device ID (0..8) Param1: - 1

731579 20347 swit mscumspmanager.cc EIP1/MSCU connectIpMedia() failed to establish a VoIP channel. For some reason a VoIP channel could not be established. As a result the connection will be NWA. Param1: EIP1 2

731580 20348 swit mscumspmanager.cc

MSCU EIP1 Heart Beat timeout. MSCU did not receive or process a heart beat within the expected period (6s). This might be a temporary problem only. If no Hearbeat is received

for more than 60s, the EIP1 will be restarted (ErrorId 20355). Param1: EIP1 device ID (0..8) Param1: - Param1: - 2

731583 20349 swit mscumspmanager.cc MSCU EIP1 firmware download failed! The EIP1 firmware is not available in the PBX filesystem! The firmware should be available (e.g. /home/sw/eip1_v7_22_0.axf). Param1: 1

731584 20350 swit mscumspmanager.cc MSCU EIP1 Heart Beat Status Error. The EIP1 heart beat did indicate an error. Param1: EIP1 device ID (0..8) Param1: Compcerto Diag. Result Param1: Comcerto Alert Type 1

731586 20351 swit mscumspmanager.cc MSCU EIP1 device object not found Param1: EIP1 device ID (0..8) or SM Port Ref Param2: Location in source code Param3: 0 or channel number 3

731702 20352 swit mscumspmanager.cc Init/boot EIP1 device failed because of an invalid IP-Address. DHCP did not provide an IP-Address for this EIP1. Param 1: Port ID Param 2: Device ID Param 3: - 1

733167 20353 swit mscumspmanager.cc Timeout while init/boot EIP1 device. Param 1: Port ID Param 2: Device ID Param 3: - 1

734325 20354 swit mscumspmanager.cc MSCU VoIP/FoIP disconnect error. Param1: Resource ID Param2: Location in source code (0..3) Param3: VAPI result (0=SUCCESS, -68000=undefined, -68xxx=errorId) 1

736848 20355 swit mscumspmanager.cc MSCU EIP1 Heart Beat Error after several timeouts. The EIP1 did not send a heart beat for more than 60s. Switch EIP1 state to error and let SM restart the EIP1 now. All VoIP/FoIP 1

741514 20356 swit mscumspmanager.cc

MSCU connectIpMedia() failed because the destination IP address could not resolve the MAC address (ARP resolver). The destination IP-Address is either unreachable, or the ARP

response was too late. Param1: EIP1 device ID (0..8) Param1: ResourceId Param1: Destination IP-Address. 1

767189 20357 swit craceipmsp.cc Switching for EIP1: Failed to map virtual H2M to H8M/TS. Param1: SmPortRef Param2: B-Channel Param3: Timeslot (0x00XX00YY) // YY=B-Channel, XX=H2M Timeslot 4

770144 20358 swit crswiasynchproxyc.cc


"ToneGenAttenuationEnum" can't be converted from char to UInt16. =2: Attribute "ToneGenAttenuationEnum" can't be found in the localisation file. =3: Attribute "V23FskSignal"

can't be converted from char to bool. =4: Attribute "V23FskSignal" can't be found in the localisation file. 3

770175 20359 swit crswiasynchproxyc.cc Failed to set country dependent DSP parameters. Parameter 1: 1 - Dial tone detector parameters 2 - Congestion tone detector parameters Parameter 2: 1 - Could not 2

770600 20360 swit cracstonec.cc

Localisation failure! ==> The country dependent value can't be set! One tone rhythm or all tone rhythms is/are set to to CH default tone rhythms. Parameter 3: =0: Localisation

file can't be opened. Localisation file is missing in the file system. The tone rhythms are set to CH default tone rhythms. =1: The tone rhythm of the CrCountryToneEnum value

(=Parameter 2) can't be set. Conversion from char to UInt8 doesn't work. =2: The number of phases is too high for the tone rhythm of the CrCountryToneEnum value

(=Parameter 2) can't be set. ==> CH default tone rhythm. =3: Timeslot info is wrong for the tone rhythm of the CrCountryToneEnum value (=Parameter 2). The word is too short.

==> CH default tone rhythm. =4: Timeslot info is wrong for the tone rhythm of the CrCountryToneEnum value (=Parameter 2). The timeslot of paramter 1 isn't used ==> CH default

tone rhythm. =5: Timeslot info is wrong for the tone rhythm of the CrCountryToneEnum value (=Parameter 2). Conversion from char to UInt8 doesn't work. ==> CH default tone

rhythm. =6: Duration info is wrong for the tone rhythm of the CrCountryToneEnum value (=Parameter 2). Conversion from char to UInt32 doesn't work. ==> CH default tone 12

772382 20361 swit crcbmbell.cc

Localisation failure! ==> The country dependent value can't be set for SectionName [CentralBellRingRhythmus]! Parameter 3: =0: Localisation file can't be opened. Localisation

file is missing in the file system. =1: Attribute "RingInternalMs" can't be converted from char to CrBellRingInternal. =2: Attribute "RingInternalMs" can't be found in the

localisation file. =3: Attribute "RingTrunkMs" can't be converted from char to CrBellRingTrunk. =4: Attribute "RingTrunkMs" can't be found in the localisation file. =5,6: Token

with index=parameter 2 can't be converted from char to UIn16. Next Error Id (same number) with parameter 3=1 or 3 shows the attribute which doesn't work. =7: Too much 5

773772 20362 swit crswistatproc.cc Could not create logs directory, dsp and swi statistic will not be available. p1: errno (mkdir) 2

773773 20363 swit crswistatproc.cc Could not create database log/dsp directory, dsp statistic will not be available. p1: errno (mkdir) 1

773774 20364 swit crswistatproc.cc Could not create database log/swi directory, swi statistic will not be available. p1: errno (mkdir) 1

773852 20365 swit crswistatproc.cc stat failed, we can not evaluate which statistics file is older. p1: errno p2: 0 p3: location 1

628135 24001 sc scv24.c too long string 1

628365 24002 sc scv24.c the string that was passed to v24printf exceeds 200 characters!!!! please correct corresponding call of v24printf and not the internal maximum. 1

628405 24003 sc scv24.c It was not possible to transmit the ServiceData over V24. After waiting a long time the signal was thrown away, and a ServiceDataAck was sent back. I dont think this is a software 1

628493 24004 sc scv24.c

V24-Problem: The Receiver throws away the latest received signal because the high layer processes did not ackknowledge the configurable number of ServiceData

signals (at the moment this value is 30). ACTION: the V24 needs to be tuned. Please tell exactly what you did, to cause this problem. Send mail/phone Franz

Brandl 1

628494 24005 sc scioh.c Signal was thrown away! This is a serious problem and you should investigate. If you don't find anything, then talk to me (Franz Brandl, 31301). 1

628632 24006 sc scmanioerror.c Alarm: Synchronisation loss 1

628634 24007 sc xanspcommon.cc Alarm: Alarm Call > Expired 2

628637 24008 sc scmanioerror.c Alarm: CDA > Printer blocked 1

628638 24009 sc scmanioerror.c Alarm: ICC > Overflow 1

628639 24010 sc scmanioerror.c Alarm: Too many ports 1

628757 24011 sc scmanioerror.c Alarm: Report Error 1

628824 24012 sc scconfdectparams.c Number of location areas is not an allowed value It should be 8 (max id 7), 16 (max id 15) or 32 (max id 31) param 0 gives its current (invalid) value 1

628825 24013 sc sctextpool.c There is a little bit strange text in the textpool with a length greater than MaxInfoTextLen (84) 1

628839 24014 sc scconfsubscprog.c Code should not have reached default clause in case 1

628840 24015 sc scconfdectsysbase.c writeHeader should not have reached default case 1

628855 24016 sc scmaniocommon.c Possibly invalid portRef 1

628856 24017 sc scconfdectsysbase.c System base board - port (in error params) gives FALSE for scRdbGetSysBaseName 1

628857 24018 sc scconfdectsysbase.c System base board - port (in error params) gives FALSE for scRdbGetSysBaseLocArea 1

628858 24023 sc scconfdectlocarea.c scRdbSetLocAreaName returns FALSE for loc area in error param 1 1

628859 24030 sc scconfdectlogon.c scRdb call returns FALSE for msn in error param 1 1

628860 24031 sc scconfdectlogon.c scRdbGetHandsetState returned FALSE for msn and naster board in error params 1

628861 24032 sc scconfdectlogon.c scRdbSetAccessCode returned FALSE 1

628862 24033 sc scconfdectparams.c scRdbGetSysBaseLocArea returns FALSE 1

628863 24034 sc scconfdectparams.c scRdbGetMaxLAId returns FALSE 1

628864 24035 sc scconfdectparams.c scRdbGetSysBaseLocArea returns FALSE 1

628869 24036 sc scconfdectparams.c scRdb call returned FALSE 1


628871 24038 sc scconfdectparams.c Incorrect CASE value in switch statement 1


628873 24040 sc scconfdectsysbase.c scRdbGetSysBaseName returned FALSE 1

628874 24041 sc scconfdectsysbase.c scRdbGetSysBsaseLocArea returned FALSE 1

628875 24042 sc scconfdectsysbase.c scRdbSetSysBaseName returns FALSE 1

628876 24043 sc scconfdectsysbase.c scRdbGetMaxLAId returned FALSE 1

628877 24044 sc scconfdectsysbase.c scRdbSetSysBaseLocArea returned FALSE 1

628878 24045 sc scconfdectsysbase.c scRdbDeleteSysBase returned FALSE 1

628879 24046 sc scconfusergroup.c scRdbSetBitset returned FALSE 1



628882 24049 sc scmaniocommon.c scRdbDeleteHandset returned FALSE 1

628883 24050 sc scmaniocommon.c scRdbDeSubscribeHandset returned FALSE 1

628884 24051 sc scmaniocommon.c scRdbDeSubscribeHandset returned FALSE 1

628885 24053 sc scmaniocommon.c portRef could not be translated to board-port 1

628893 24054 sc scconflcrservprov.c returnStatus not an expected value 1

628902 24055 sc scmaniopartner.c unexpected Minor signal 1

628903 24056 sc scmaniopartner.c Unexpected Major signal 1

628919 24057 sc scconflcrtable.c unexpected enum value 1



628922 24060 sc scconflcrtable.c 1



628930 24063 sc scmaniocommon.c unexpected enum value 1

629019 24064 sc scconfsubscprog.c DECT handset FACs should not be here, as they should have already been handled in write_interface_type_line 1

629027 24065 sc scconfdectlogon.c Could not turn subscription allowed off in the location area 1

629031 24066 sc scconfsubscprog.c Unexpected handset subscription value 1

629042 24067 sc scioh.c service not known 1

629043 24068 sc scioh.c couldn't find service for the new socket 1

629044 24069 sc scioh.c sockP or sockP->servP is NULL 1

629045 24070 sc scioh.c unexpected signal received 1

629046 24071 sc scioh.c unexpected type of interface 1

629047 24072 sc scioh.c already a ServiceStat pending 1

629117 24073 sc scmaniocommon.c DECT timeout message number is invalid. Should be a null terminated string 1

629123 24074 sc scioh.c scIohReadSocket: invalid pointer 1

629163 24075 sc scmanlanguage.c Default language could not be initialised for this country. 1

629165 24078 sc scmanlanguage.c No text string is defined for this language. 1

629213 24080 sc scconftelemaintenance.c Unexpected enumeration value 1

629219 24081 sc scmanio.c Unexpected Telemaintenance permission during telemaintenance access 1

629220 24082 sc scmaniostr.c No product name string associated with this salesChannel. 1

629237 24083 sc scinitnormtxtch.c Default message text definition for this language is too long. 1

629265 24084 sc scaimsbasicsetup.c value of ioLanguage does not match one of the current four languages 1

629266 24085 sc scmaniostr.c invalid language value - default language substituted 1

629267 24086 sc scmaniostr.c Language invalid - using default language 1

629280 24087 sc scconftelemaintenance.c Alarm: telemaintenance enabled 1

629287 24088 sc scaimscommon.c Unexpected enum value 1

629288 24089 sc scconflcrinhservprov.c Unexpected enum value 1

629289 24090 sc scconflcrinhservprov.c Unexpected enum value 1

629290 24091 sc scconflcrinhservprov.c unexpected enum value 1

629292 24092 sc scaimsdectsubscriber.c Unexpected enum value 1

629302 24093 sc sccommon.c unexpected enum value 1

629332 24094 sc scaims.c Unexpected error value 1

629360 24095 sc scmaniocommon.c telemaintenance switch unexpected value 1

629420 24096 sc scupdnxmodem.c During upload, we received too much datas which will not fit in KDM space. We throw them away. Was this an upload with an AVM Fritz! card? 1

629464 24097 sc scioh.c This combination of flags should never occur 1

629509 24098 sc scaims.cc AIMS request contains an invalid set type. 1

629512 24099 sc scioh.c The sendAllowed signal should never be received in the case of a Delivery Confirmed socket 1

629524 24100 sc scaimsbuffer.cc Size of buffer for AIMS response has been exceeded. 1

629628 24101 sc scusccont.cc A unrecognised signal is at the commit handler interface. 1

629641 24102 sc scmanio.c man_io_cb.abort_cause maybe unknown. 1

629642 24103 sc scmanio.c Variable time is NOT initialised. 1

629667 24104 sc scusccont.cc There isn't a valid application in DRam. 1

629668 24105 sc scusccont.cc Can't open a file! 1

629669 24106 sc scusccont.cc Compression didn't finish successfully. 1

629670 24107 sc scusccont.cc Can't close this file! 1

629671 24108 sc scusccont.cc fwrite wasn't successful! 1

629674 24109 sc scusccont.hh A problem with the Db occured. Most likely it wasn't possible to create a new object. 1

629685 24110 sc scmaniocommon.cc An error occured while trying to access the database for a unique entry to set TeleMaintenance permission. 1

629686 24111 sc scmaniocommon.cc error in finding in the database the Telemaintenance permission status. 1

629801 24112 sc scconfnumbers.cc This function should be called for to create abbreviated dialing numbers and nothing else ' . 1

629802 24113 sc scconfnumbers.cc This function should be called for to create network sub. and nothing else 1

629812 24114 sc scmaniocommon.cc Error while trying to find a unique an ArSingleInstanceIdC in the database in scCheckTeleMaintenance 1

629822 24115 sc scconfservice.cc Database count of instances greater than maximum specified limits. 1

629851 24116 sc scusccont.cc SW-upload alarm: SW update will take place later (date and time given) 1

629852 24117 sc scusccont.cc SW-upload alarm: SW update successful (no crash durig supervisory time) 1

629908 24118 sc scaimscommon.c Time/Date string corrupt. 1

629917 24119 sc scusccont.cc The filename in the file list does not match the actual file stored 1

629918 24120 sc scusccont.cc The file in the sw mgr is not present in the file list 1

629919 24121 sc scusccont.cc The sw mgr is invalid 1

629920 24122 sc scusccont.cc There was no file to roll back to. 1

629927 24123 sc scusccont.cc can't execute the event, no proper state has been set 1

629928 24124 sc scusccont.cc Unexpected event for this state of scUscC. First parameter is the event code based on the scUscC::Event enum. Second paramaeter is the location in the code. 2

629929 24125 sc scaims.cc Unrecognised ASNMP message received by AIMS on PBX side 1

629940 24126 sc scaims.cc Size of buffer for AIMS request has been exceeded 1

629951 24127 sc scusccont.cc Alarm: Uploaded SW crashed during supervision time. Old SW has been restored (rollback has been performed). 1

630044 24128 sc masumcont.cc The ScUsc wasn't able find a file name passe on via HwiComm from the boot SW. The boot SW must always set thi info block. 2

630045 24129 sc scusccont.cc Not possible to create a SwMgr. 1

630046 24130 sc scusccont.cc There's no SW manager in the DB. 1

630047 24131 sc scusccont.cc We must not start-up with ResetPending. 1

630048 24132 sc scusccont.cc The validity check of the SwMgr failed. The SwMgr contains at least one file name which doesn't exist in the file system. 1

630052 24133 sc scmasynchbridge.cc Error Mapping ScTbxMenuEnuC to MaTbxMenuEnuC - undefined value 1

630069 24134 sc scusccont.cc If the PBX starts-up in this state, this indicates a failed SW change which wasn't detected by the boot SW. This indicates a serious RUL problem. Luckily the PBX shouldn't have a 1

630125 24135 sc scuscfilemanager.cc This indicates an endless loop. Perhaps we have a serious file system problem (file deletion impossible!) 1

630126 24136 sc scuscfilemanager.cc File creation impossible. 1

630127 24137 sc scuscsoftwaremanager.cc Wrong enum value for switch statement. 1

630128 24138 sc scuscfilemanager.cc The ascotel string doesn't fit into the charachter string. 1

630168 24139 sc scaimsdectsubscriber.cc Get command proceeded, but the database or DIRE cache is in an inconsitent state! A fisrt start is recommended. 1

630260 24140 sc scaimssubscriberinport.cc the NPI cache is not up to date 1

630269 24141 sc scaimsnumberingplan.cc The NPI cache is not up to date! 1

630273 24142 sc scioh.cc scIohFlushServiceDataDownstream() has both destinationP and serverSockP set to NULL! Cannot send data. 1

630431 24143 sc scaimshotlinedest.cc Could not find a hotline instance in spite of a valid ID -> database inconsistant! 1

630432 24144 sc scaimsgeneraltimer.cc Instance not found -> inconsistant database -> crash 1

630435 24145 sc scaimsdectnode.cc DectSetup or DectNetwork single instance not found: inconistant database 1

630441 24146 sc scaimshotlinedest.cc We had to create a hotline instance. This means, someone destroyed this instance, which is not allowed anymore! 1

630444 24147 sc scaimssubscriber.cc Someone has deleted a hotline instance. This is not allowed anymore! 1

630449 24148 sc scxasynchbridge.cc Error id for enum mapping of XaNumAnalEnuC type. 1

630450 24149 sc scxasynchbridge.cc Error id for enum mapping of ScNumAnalEnuC type 1

630464 24150 sc scaimsmodule.cc Transaction failed: User related data might not be deleted properly 1

630465 24151 sc scaimsboard.cc Transaction failed: User related data might not be deleted properly 1

630466 24152 sc scaimssubscriberinport.cc transaction failed while moving the subscriber to another port. the number is the means the oldAd2PortId 1

630467 24153 sc scaimssubscriberinport.cc During the deletion of subscribers, a dire object was detected which contains an empty Number attribute. This should not happen. 1

630468 24154 sc scaimscalldistribution.cc The switchGroupType was not correctly set in the callDistribution. This shuold never happen. It seems that the DS has a problem. The number in the error msg isthe callDistId. 1

630469 24155 sc scaimsdecthandset.cc hash table for the numberingplan is corrupt. A restart is recommended. The number in the error log is the subs number which was not foung. 1

630470 24156 sc scaimshotelsetup.cc the scHotelSetup instance was not found. Restart System. There are two possibilities, someone changed the Re-/Firststart behaviour or the DS is cporrupt. 1

630471 24157 sc scaimssubscriberinport.cc problem while deleting a subscriber. Parsing through the user groups cuased this error report. The number is the subsId of the subscriber. 1

630482 24158 sc scusccont.cc Old app file did not delete after supervision ended.scusccont.cc:1618 1

630483 24159 sc scusccont.cc Database backup did not delete after supervision end.scusccont.cc:840. 1

630484 24160 sc scusccont.cc Failed to find SW manager object!!line 824. 2

630516 24161 sc scaimsethernetipaddressing.cc Writing the file with the changed Ethernet IP settings failed: The next firststart will reset Ethernet IP address, subnetmask and gateway to factory settings! 1

630522 24162 sc 2

630523 24163 sc scconfhotelsetup.cc Single instance not found -> corrupt database! 1

630524 24164 sc scinit.cc AccessLevel instance not created -> corrupt database! 1

630525 24165 sc scinit.cc Setup single instance not found -> corrupt database! 1

630526 24166 sc scmanio.cc Expected object not found -> database corrupt 1

630531 24167 sc scconfroomstate.cc Global variable modify_process has an unexpected value. 1

630547 24168 sc scaimssubscriber.cc Unknown kindofTerminal type 1

630593 24169 sc scusccont.cc Could not close the directory stream. This could end with a crash because of missing detaches. 1

630601 24170 sc scioh.cc Couyldn't find HDLC Terminal Adaptor object in the databse 1

630602 24171 sc scaims.cc Mistake... 1

630603 24172 sc scioh.cc Unexpected Start signal received. 1

630909 24173 sc scioh.cc Unexpected data within ScIohClientSocket::handleData(), currently (i6) there is no need to handle data because this socket is used for outgoing data only. Remove this error report 1

630950 24174 sc scaims.cc Failed to open the downstream interface 2

630951 24175 sc scaims.cc Call to listen failed 1

630952 24176 sc sc*.cc generic errorid for the SC domain 1

630953 24177 sc scaimsbuffer.cc ScAimsBuffer::transmit() failed to send the buffer. 1

630994 24178 sc scaimsport.cc A port type which is not handled by AIMS has been presented to AIMS. Port type (SmPortInterfaceTypeC) is stored in parameter 1. 1

631006 24179 sc scaimsbuffer.cc for some reason I encountered a crash; the request of PC-COMLIB was HANDCRAFTED, i.e. in reality this possible crash would maybe not occur at all, but who knows.. 1

631114 24180 sc scaimsnumberingplan.cc inconsistent database for some reason, please have a look into br18353, 18535 and 20445: for some strange reason there exists an subscriberinstance without a directoryentry 1

631149 24181 sc scaimsbuffer.cc see br21003 the highest one. INTERNAL PBX PROBLEM, PLEASE REPORT ! 2

631180 24182 sc scioh.cc scIohAlarmTrace() P1 is the location of the alarm (line number in scioh.cc) 1

631204 24183 sc scioh.cc scioh tried to create a second DlDestination instance 1

631205 24184 sc scioh.cc unhandled write status 1

631206 24185 sc scioh.cc destinationP is NULL 1

632574 24186 sc scallmutex.cc Reference count tried to go negative 1

632923 24187 sc scaimsport.c New PortAssignment didn't work correctly 1

636157 24188 sc scaims.cc to track down the problem with br22936, this error-id was introduced: now this error happens (warning) everytime a datatransmission to the AIMS-application (via DL od course) 1

639522 24189 sc scaims.cc report failure of a table-creation 1

639525 24190 sc scmenuactivealarm.cc Unexpected active alarm. 1

640186 24191 sc scmenualarmhistory.cc The length of the message is too long! Make it shorter in order to have a chance to display it. 1

648199 24192 sc scvmmpipe.cc Failed to find location 1

648200 24193 sc scvmmpipe.cc Failed to get slot ID 1

652280 24194 sc scmaniocommon.c Not able to delete Voice Mailbox. 1

656377 24195 sc scuscswupgrademgr.cc The resetDateTime in the software manager object couldn't be updated. If a reset occurs, the node will certainly perform a rollback. 1

657154 24196 sc scmenu..., scconf... Generic error: default-path in switch case 2

657581 24197 sc scuscswupgrademgr.cc After an upgrade, an IP phone came up with the same software as before. It shouldn't happen. It can be that the application file doesn't correspond to the application version 1

658036 24198 sc scusccont.cc The Software Manager is in the state "UpdateRunning or UpdatePending" but the UpdateDateTime is set to default. This situation should not happen. In this case save the time 1

659784 24199 sc scuscswupgrademgr.cc Software Upload Software Upgrade Manager: Transaction writing to database failed. The first parameter is numbering the different locations. 1

659787 24200 sc scusccont.cc Software Upload Controller: Transaction writing to database failed. The first parameter is numbering the different locations. 1

660254 24201 sc scusccont.cc A satellite is registering at the master after the end of supervision time. This means it has been registered and commited without any supervision. Usually it will be in normal 2

660264 24202 sc scusccont.cc

A satellite missed the commit at the end of supervision time. It will remain in the supervision running state, and when crashing will roll back to old software and disappear out of

the AIN. NodeId is in the first parameter. If this error is followed by an error 24201 with the same parameters, everything is ok again. 2

661275 24203 sc scusccont.cc

Software Upgrade. Satellites are missing at the end of supervision time. Then, all satellites a master knows are expected to be registered and working. If some do not, this alarm is

generated. Parameter 1: Total number of satellites missing. Parameter 2: Number of satellites that did roll back to the old SW (or never have got the new SW). 2

661931 24204 sc scuscswupgrademgr.cc Database Object not present. Some evil force has removed a sinlge instance persistent object. Parameter 1 numbers the error locations. 1

670753 24205 sc scaimsofficetermdata.cc Valid TpTerminal, BoardId, portNr, msnId, XaDevice, XaSubscriber BUT no XaDirectoryEntry (in order to track down br32007: Crash in XA while configuring with AIMS) Parameter 2

671549 24206 sc scaimsofficeiptermdata.cc Bad row accessor in 'saveRowData' method 1

672974 24207 sc scaimssubscriberinport.cc Subscriber instance not found 1

688017 24208 sc scaimscalldistribution.cc storeSwitchValues() unknown or not allowed number as subscriber 1

688536 24209 sc scaimstrunkline.cc Sending a trunk configuration signal to an analogue trunk port is impossible because building the packet failed. Param 1: Port reference Param 2: Trunk ID Param 3: Code location 1

688708 24210 sc scmanofficeipterm.cc Internal error. Use parameter #2 to find the location. 1

692271 24211 sc scaimsdspresources.cc Configured role for this DSP device is inconsistent. Param1 : DSP board (nodeId, slotId). Param2 : DSP deviceId. Param3 : DSP configured role 4

694153 24212 sc scaimsunreachablesubscriber.cc In function mapXaEnumToMdtEnum, an unhandled value of XaNotReachableDestTypeC was received to convert. The first parameter is this value. 1

694154 24213 sc scaimsunreachablesubscriber.cc In function mapMdtEnumToXaEnum, an unhandled value of UnreachableDestTypeEnum was received. The first parameter is this value. 1

694167 24214 sc scaimsnumberingplan.cc When trying to renumber a subscriber, the new number could not be stored. This was because the corresponding directory entry instance could not be found. The first parameter 1

704646 24215 sc scrdbterm.cc Subscriber or Terminal don't exist 1

707358 24216 sc sccfgprocc.cc Unknown Signal - MajorScCfg, Minor unknown. Param 1: minor 1

707695 24217 sc sccfcprocc.cc Unknown Signal - MajorFm, Minor unknown Param 1: minor 3

707827 24218 sc sccfg5xiconfigc.cc Failed to generate 5xi configuration template file. Param1: 0 = aastra.txt, 1 = mac.txt 2

709350 24219 sc scaimsofficetermdata.cc casting from tpTermId to XaTermId. tpTermId is not valid in XaTermId. 1

710238 24220 sc scaimsterminal.cc a key associated to a terminal has been found BUT no line is associated to it parameter P1: terminal ID parameter P2: key ID reference: br40147: Crash during upload PC > PBX 1

710759 24221 sc sccfg5xiconfigc.cc Could not open config file for generation from template. Param1: 0 = aastra.cfg, 1 = <mac>.cfg 3

710760 24222 sc sccfg5xiconfigc.cc Failed to open existing 5xi configuration template file. Param1: 0 = aastra.txt, 1 = mac.txt 3

710992 24223 sc sccfg5xiconfigc.cc Could not create mac.cfg - no valid mac address found for terminal. Param1: termId 2

715046 24224 sc sccfgprocc.cc Signal MajorScCfg - invalid Parameter. Param1: minor Param2: termId 1

716241 24225 sc scaims.cc Someone request a partial wildcard which is not yet (re-)implemented parameter 1: table id 2

716576 24226 sc sccfg5xiconfigc.cc Delete request timer for mac.cfg file expired! The PBX tried to delete a mac.cfg file but did not receive a confirmation from the file system within 30 seconds. 2

716579 24227 sc sccfg5xiconfigc.cc Delete request timer for mac.cfg file expired but was not found in the list of running timers. This should never happen. 1

716581 24228 sc sccfg5xiconfigc.cc Unknown timer expired. 1

716583 24229 sc sccfg5xiconfigc.cc Try to re-generate the mac.cfg file of a terminal which is not in the list of known Aastra SIP terminals. 1

716585 24230 sc sccfg5xiconfigc.cc File to delete is already in the list of files to delete. 2

717442 24231 sc scallbackuprestorehandlerc.cc method called in a wrong state P1: myState {Idle, Backup, AwaitReset, RestoreDialog, Restore} 4

717455 24232 sc scallbackuprestorehandlerc.cc failed to setup swManager for restore operation 1

717460 24233 sc scallbackuptagsc.cc Could not open file in file system 1

717790 24234 sc scwebmdtaccess.cc Web client tried to access an MDT using an invalid parameter. P1=tableId, P2=fieldNum, P3=value (save only) 1

717796 24235 sc scwebmdtaccess.cc Web config tried to access an invalid column. P1=tableId P2=col P3=0-> method "columnInRange" =1-> method "readTableData" =2-> method "iteratorGetColData" =3-> 3

718060 24236 sc scwebmdtaccess.cc Invalid table id. P1 is the table id. 1

719210 24237 sc scwebmdtaccess.cc unknown escapeMode for the output to the webserver. 0=NoEscaping 1=Escape for Javascript 2=Escape for Html 1

719587 24238 sc scallbackuptagsc.cc

backup_info tags mismatch which lead to "Restore => Aborted" parameter P1 tags are coded bitwise, where bits are 0x01 tag Web config 0x02 tag Database Id 0x04 tag Pbx

Type 0x08 tag hardware board 0x10 tag hardware port Example: 0x18 stands for error on "tag hardware board" AND "tag hardware port" 2

719752 24239 sc scallbackuprestorehandlerc.cc ZIP file name in class variable "myZipFile" is empty - so it is not possible to delete the temporarily stored ZIP file. 1

719763 24240 sc scaimsdeviceonport.cc Someone tried to assign a reference id to a port, but the corresponding directory entry has got no number (example: set relay reference number prior setting a relay number) 1

726299 24241 sc scallcommon.cc failed to remove file Parameter 1: errorno, Parameter 2: filename(...CCCCcccc), Parameter 3: filename(...CCCC). 1

727031 24242 sc sccfgaaipconfigc.cc Major signal MajorScCfg -invalid parameter. Param1: minor Param2: termId 1

727032 24243 sc sccfgaaipconfigc.cc Could not open config file for generation from template. 1

727033 24244 sc sccfgaaipconfigc.cc Failed to open existing AaIp configuration template file. 1

727034 24245 sc sccfgaaipconfigc.cc Could not create localdb.config.mac-aa-ip.cfg - no valid mac address found for terminal. 1

727035 24246 sc sccfgaaipconfigc.cc File to delete is already in the list of files to delete. 1

727036 24247 sc sccfgaaipconfigc.cc Try to re-generate the mac.cfg file of a terminal which is not in the list of known Aamadeus Ip terminals. 1

727190 24248 sc scaims Failed to open/write DoBackupFileFileName. 2

727191 24249 sc scaims Copying backup file from web/.. <filename> to backup/tmp/<filename> failed parameters store the last part of the filename 2

727196 24250 sc scaims Unexpected / unknown signal or parameter in the signal. Parameters: 1. minor (major is always MajorFm) 2. unexpected parameter (or 0 if the whole signal is 1

727278 24251 sc sccfgtlsconfigc.cc Unable to create the TLS directory stucture Param1: Dir index 1

727707 24252 sc scsystembackupmanager File system function call failed 2

727869 24253 sc sccfgtlsconfig.cc

TLS certificate update failed. Parameter1: 0= Aastra Endpoint, 1= 3rd PTY Certificate (1st Byte) If Par. 1 (Bit 0-7) = 1 then: Parameter1 (Bit 8-31) : CertificateName (1st 3 Chars of

the CertificateName) Parameter2: If Par. 1 (Bit 0-7) = 0 then: Parameter2 : SIP Node ID If Par. 1 (Bit 0-7) = 1 then: Parameter2 : CertificateName (next 4 Chars) Parameter3: If

Par. 1 (Bit 0-7) = 0 then: Parameter3 : empty If Par. 1 (Bit 0-7) = 1 then: Parameter3 : CertificateName (next 4 Chars) 1

727870 24254 sc sccfgtlsconfig.cc

TLS certificate expires soon. Parameter1: 0= Aastra Endpoint, 1= 3rd PTY Certificate (1st Byte) If Par. 1 (Bit 0-7) = 1 then: Parameter1 (Bit 8-31) : CertificateName (1st 3 Chars of

the CertificateName) Parameter2: If Par. 1 (Bit 0-7) = 0 then: Parameter2 : SIP Node ID If Par. 1 (Bit 0-7) = 1 then: Parameter2 : CertificateName (next 4 Chars) Parameter3: If

Par. 1 (Bit 0-7) = 0 then: Parameter3 : empty If Par. 1 (Bit 0-7) = 1 then: Parameter3 : CertificateName (next 4 Chars) 1

727956 24255 sc scsystembackupmanager Failed to transfer Auto Backup File via FTP to remote server 2

727957 24256 sc scsystembackupmanager Calculation of next backup file distribution was called with an invalid frequency value 1

728145 24257 sc sccfgtlsasyncfacade.cc Timeout waiting for a response signal 1

728501 24258 sc sccfg5xiconfigc.cc Could not create tftp directory. 1

729026 24259 sc sccfgtlsconfig.cc Failed to remove an unmanaged file in the import certificate directory. It may be that this file is an expired certificate, in which case OpenSSL may get confused. p1, p2, p3: First 12 1

729028 24260 sc sccfgtlsconfig.cc Someone attempted to modify the public PBX certificate. p1,p2,p3: The first 12 chars in hex of the name of the file that tried to overwrite the public certificate. 1

729031 24261 sc sccfgtlsconfig.cc Unable to generate the PBX certificate. This means that no TLS connections to the PBX can be established. 1

729038 24262 sc sccfgtlsconfig.cc The PBX certificate will expire soon. p1: days to expiry 1

729172 24263 sc sccfgtlsasyncfacadec Problem in SIP node related signal. See parameter for exact location. 1

729230 24264 sc sccfgtlsconfig.cc Unable to resolve SIP node domain name to a valid IP address 1

729270 24265 sc sccfgtlsconfig.cc Someone is tampering with an imported certificate file (see param for details) 1

729305 24266 sc scsystembackupmanagerc.cc request to make a backup failed 3

731254 24267 sc sccfg67xximactemplatec.cc 67xxi - No valid MAC address to generate config file. 2

731256 24268 sc sccfgaaipmactemplatec.cc AaIp - No valid MAC address to generate config file. 1

731257 24269 sc sccfgconfigfilemgrc.cc Could not append the device to the device list! (This should never happen as we have checked the list for this device before)! Param 1: deviceId 2

731258 24270 sc sccfgconfigfilemgrc.cc Device not found! Can't remove device! Param 1: deviceId 1

731259 24271 sc sccfgconfigfilemgrc.cc Could not add user to the user list! (This should never happen as we have already checked the list for this user before we created it.) Param 1: userId Param 2: identifies call 2

731260 24272 sc sccfgconfigfilemgrc.cc Found an association for this device but the user is invalid! Param 1: deviceId Param 2: userId Param 3: identifies the call location of this error report 3

731261 24273 sc sccfgconfigfilemgrc.cc Signal MajorScCfgDev - invalid Parameter. Param1: minor Param2: deviceId Param3: identifies the call location of this error report 1

731263 24274 sc sccfgfiletemplatec.cc Failed to open file. 1

731264 24275 sc sccfgfiletemplatec.cc Failed to open existing configuration template file. 2

731265 24276 sc sccfgfiletemplatec.cc Failed to generate configuration template file. 1

731518 24277 sc sccfgconfigfilemgrc.cc

Could not create directory. Param1: errno Param2: 1..7 1 = /home/mivo400/tftp 2 = /home/mivo400/pub 3 = /home/mivo400/pub/bluster 4 = /home/mivo400/aamadeus

5 = /home/mivo400/pub/termsip 6 = /home/mivo400/pub/dialer 7 = /home/mivo400/pub/teleworker 4

731884 24278 sc scaims.cc Could not find an Instance of an OIM object 1

731921 24279 sc sccfgtlsconfig.cc The ScCfgProcC on a satellite received a NodeInService signal. This should happen way before it reaches its handleSig() method, e.g. in its prelude. 1

731984 24280 sc scallbackuprestorehandlerc.cc Restore or make a backup file: restoring/backuping TLS certificates failed 2

732672 24281 sc scallbackuprestorehandlerc.cc Zip file handling error (open, close) 1

733954 24282 sc scaimsamccsystem.cc Not all DDI numbers of this AMCC instance have the same DDI plan Param1: cdeId Param2: ddi plan of the others Param3: ddi plan of the ddi number associated with the CDE of 2

733968 24283 sc scaimssystem.cc SIP remote node already exists. Why? Param1: amccId Param2: sipRemoteNodeId 1

734231 24284 sc sccfgtlsconfig.cc New PBX TLS certificate generated. Update non-Aastra SIP devices. 1

735076 24285 sc sccfgtlsconfig.cc TLS Certificates must be re-generated due to IP-Address change 1

735118 24286 sc scaims*.cc Report an Error/Warning during call of wildcardGetRequest Param1 table ID Param2 ScAIMSErrorTypeEnu Param3 1

735795 24287 sc sccfgaaipterminalc.cc The Master config is not the same as the Satellite config. See param for concrete inconsistency. 1

736643 24288 sc scaimseipsettings.cc

The configured IP address of an EIP module has been changed via AMS or webAdmin so all active VoIP connections using this EIP have been lost. Param1 is the EIP slotId

(numbering starts at 0, node ID is missing!), Param2 is the subSlotId (numbering starts at 1), Param3 the new IP address (a value of zero means DHCP is enabled). Remark: This

is just a warning, and it is also issued if no channels were active. 6

738573 24289 sc scallbackuprestorehandlerc.cc Restore or make a backup file: restoring/backuping DHCP server files failed 1

740630 24290 sc scaimsalarmnotification.cc Test Alarm is called with myAimsP == NULL, probably from WebAdmin 1

741064 24291 sc scdbc* Problem in one of the Database-Connector (DBC) objects 1

741799 24292 sc scaimshotelsetup.cc Unknown hotel mode for function 'switchingHotelMode'. p1 = hotel mode. 1

741800 24293 sc scaimshotelsetup.cc Could not found 'ScHotelSystem' instance. 1

742273 24294 sc scallbackuprestorehandlerc.cc Restore or make a backup file: restoring/backuping Hotel Call Logging Templates failed 1

744489 24295 sc sccfg8000iusertemplatec.cc Failed to open file. 1

744491 24296 sc sccfg8000iusertemplatec.cc No valid windows user name found - can't generate config file. 1

744601 24297 sc sccconftelemaintenance.cc Alarm: telemaintenance disabled 1

748565 24298 sc sccfgtlsconfig.cc TLSCertificateUpdated positive alarm to TLSCertificateUpdateFailed 1

748682 24299 sc scaimsuserapplicationparameter.cc Acm windows account creation failed param1: id of the account to create param2: userId param3: willCommit() 1

749560 24300 sc sccfgconfigfilemgrc.cc Genaral memory limt for personal user directories exceeded! Param1: limit Param2: actual value 1

749561 24301 sc sccfguserc.cc Memory limt for personal user directory exceeded! Param1: user Param2: limit Param3: actual value 1

749562 24302 sc sccfguserc.cc User file system usage is over the critical limit. Param1: userId Param2: actual usage 2

749563 24303 sc sccfguserc.cc User file system usage is under the critical limit. Param1: userId Param2: actual usage 2

751053 24304 sc scallbackuprestorehandlerc.cc Restore or make a backup file: restoring/backuping BluStar Preferences failed 1

751062 24305 sc sccfgbs8000iasynchfacadec.cc Timeout waiting for a response signal 2

751893 24306 sc sccfgsipproviderconfigfilemgrc.cc Could not create directory structure Param1 = errno Param2 = 1 -> '/home/data/sip' 2 -> '/home/data/sip/provider' 3 -> '/home/data/sip/provider/import' 1

751902 24307 sc sccfgsipproviderconfigfilemgrc.cc Could not create a sip provider configuration file in directory '/home/data/sip/provider/<fielName>.xml'. Param1 = errno 2

751904 24308 sc sccfgsipproviderconfigfilemgrc.cc Could not open imported file of directory '/home/data/sip/provider/import/<fielName>.xml'. Param1 = errno 1

752066 24309 sc sccfgbsclientusertemplatec.cc Failed to open file! 1

752564 24310 sc sccfgsipproviderconfigfilemgrc.cc Problem by SIP provider creation. Param1 = 1 -> could not link bundle to sip provider 2 -> could not create sip line or bundle Param2 = sip provider id Param3 = bundle id 2

754665 24311 sc scallbackuprestorehandlerc.cc Restore or make a backup file: restoring/backuping (8000i Local Settings/BluStar Preferences) failed Param1: 1 => 8000i Local Settings 2 => BluStar Preferences 3

757676 24312 sc sccfgconfigfilemgrc.cc Backup configuration protocol: Unknown backup config message type! 1

757677 24313 sc sccfgconfigfilemgrc.cc Backup configuration protocol: Invalid Sync Status! 1

757678 24314 sc sccfgconfigfilemgrc.cc Did not find backup server! Param 1: backup server id 1

757679 24315 sc sccfgconfigfilemgrc.cc Unmarshalling sync status failed! 1

757685 24316 sc sccfg67xxiterminalc.cc Redundancy, 67xxi Terminal: Trying to set backup server although already set. Param1: terminal id Param2: actual backup server id Param3: backup server id that was tried to 2

757686 24317 sc sccfgbackupserverc.cc Backup server synchronisation status - unexpected value! Param1: backup server id Param2: value (ArBackupServerSyncStatusEnuC) 1

757702 24318 sc sccfgbackupserverc.cc Synchronization of backup CS failed. Param1: Backup Server Id 1

757703 24319 sc sccfgbackupserverc.cc Synchronization of backup CS ok. Param1: Backup Server Id 1

757704 24320 sc sccfgbackupserverc.cc Backup instance configuration failed! Param1: instanceType (enum: 0 user, 1 terminal) Param2: User number (if parameter 1 is "0 User") or Terminal id (if parameter 1 is "1 1

757705 24321 sc sccfgbackupserverc.cc Backup instance configuration succeeded! Param1: instanceType (enum: 0 user, 1 terminal) Param2: User number (if parameter 1 is "0 User") or Terminal id (if parameter 1 1

757795 24322 sc scwebmdtaccess.cc web MDT request is longer than the available buffer Param1: Table Id Param2: available size Param3: requested size 2

760640 24323 sc scaims.cc Could not change prio of process P1: request new prio P2: returned prio P3: location (0: axp, 1: twp) 1

763485 24324 sc sccfgsumpageimpexpmgrc.cc Could not create directory structure Param1 = errno Param2 = 1 -> '/home/data/sumpage' 2 -> '/home/data/sumpage/import' 1

764829 24325 sc sccfgamcterminalc.cc Failed to open AMC LCR file for writing. Param 1: termId 1

765049 24326 sc scimpimportexportmgrc.cc Could not create directory structure Param1 = errno Param2 = 1 -> '/home/data/impexp' 1

765608 24327 sc sccfg67xxiftpaccessc.cc FTP Server not reachable Parameter 1: FTP Server IP address 2

765610 24328 sc sccfg67xxiftpaccessc.cc Counterpart alarm: "FTP Server reachable again" Parameter: FTP Server IP address 1

765804 24329 sc sccfgfiletemplatec.cc Template file does not exist. 1

766039 24330 sc sccfgprocc.cc Could not copy the imported file of the webserver! 2

766040 24331 sc scimpwebuploadhandlerc.cc Could not rename the imported file! param1 = errno 4

766043 24332 sc scimpprocc.cc No processId for 'ScImpProc' process. Something went really wrong! 1

766057 24333 sc sccfg67xxilangfileaccessc.cc

Requested language file is not available in the contents.txt file from the FTP server. Param 1: Ip address of the FTP server Param 2 bit (31-24): "s" for system language or

"t" for terminal language pack Param 2 bit (23-0), Param 3: <iso-language-code>[_<iso-country-code>] e.g: "tde" for lang_de.txt "spt_br" for syslang_pt_br.txt 1

766067 24334 sc sccfgremotefileaccessc.cc

Error in contents.txt file - invalid or missing system language version. Param 1: 0 for unknown contents.txt file 1 for contents-lang.txt file form FTP server 2 for

/home/sw/std_lang/contents.txt 3 for /home/data/languages/contents.txt Param 2 bits (31-16): language category (ScPbxLangPackEnuC) Param 2 bits (15-0): first 2 bytes

of filename (without path) or <iso-language-code>[_<iso-country-code>] NOTE: If category is "AastraSIPTerminal" a 't' is prepended to

the file name for terminal language packs and an 's' for system languages Param 3 bits (31-0): byte 2..5 of filename or <iso-

language-code>[_<iso-country-code>] e.g: - param 2: "1td", param 3: "e" for AastraSIPTerminal language pack "lang_de.txt" - param 2: "1sp", param 3: "t_br" 6

766081 24335 sc sccfg67xxilangfileaccessc.cc

Error in contents.txt file - invalid or missing terminal language version. Param 1: 0 for unknown contents.txt file 1 for /home/data/languages/contents.txt 2 for

/home/sw/std_lang/contents.txt Param 2 bit (31-24): "s" for system language or "t" for terminal language pack Param 2 bit (23-0), Param 3: <iso-language-

code>[_<iso-country-code>] e.g: "tde" for lang_de.txt "spt_br" for syslang_pt_br.txt 1

766194 24336 sc sccfgremotefileaccessc.cc

Error in contents.txt file - missing native name for system language. Param 1: 0 for unknown contents.txt file 1 for contents-lang.txt file form FTP server 2 for

/home/sw/std_lang/contents.txt 3 for /home/data/languages/contents.txt Param 2 bits (31-16): language category (ScPbxLangPackEnuC) Param 2 bits (15-0): first 2 bytes

of filename (without path) or <iso-language-code>[_<iso-country-code>] NOTE: If category is "AastraSIPTerminal" a 't' is prepended to

the file name for terminal language packs and an 's' for system languages Param 3 bits (31-0): byte 2..5 of filename or <iso-

language-code>[_<iso-country-code>] e.g: - param 2: "1td", param 3: "e" for AastraSIPTerminal language pack "lang_de.txt" - param 2: "1sp", param 3: "t_br" 3

766225 24337 sc scimpreaderwriterxlsxc.cc Something went wrong by reading user data of the xlsx file format. The CS stops to read the file at following index parameter: Param1 = rowIndex Param2 = columnIndex 4

766234 24338 sc scimpreaderwriterxlsxc.cc Something went wrong by writing user data in a xlsx file format. The CS stops to write the file at following index parameter: Param1 = rowIndex Param2 = columnIndex 3

768833 24339 sc sccfgblulstarandroidclientc.cc Failed to create BluStar Android client directory! Param1: userId Param2: termId Param3: errno 2

768834 24340 sc sccfgblustarandroidclientc.cc Failed to remove BluStar Android client directory! Param1: userId Param2: termId Param3: errno 2

768866 24341 sc sccfg67xxiftpaccessc.cc Failed to resolve domain name for language file server. Param1: IP address 1

769430 24342 sc sccfgaastrasipcountrysettingsc.cc Deleting the local Aastra SIP country settings file failed! 1

769431 24343 sc sccfgaastrasipcountrysettingsc.cc Renaming the local Aastra SIP country settings file failed! 1

770091 24344 sc scaimslogger.cc vsprintf() wrote off the end off the buffer. 1

770092 24345 sc scaimslogger.cc could not create/open log file file for writing/append info 1

770093 24346 sc scaims.cc Could not create backup directories! (also used in scaimslogger.cc) Param1: fs errno Param2: identifier 2

770263 24347 sc sccfgaastrasipcountrysettingsc.cc Deleting the temporary Aastra SIP country settings file failed. Param1: error location 1

770315 24348 sc scimpreaderwriterxlsxc.cc Something went wrong by writing short dial data in a xlsx file format. The CS stops to write the file at following index parameter: Param1 = rowIndex Param2 = columnIndex 1

770328 24349 sc scimpreaderwriterxlsxc.cc Something went wrong by reading short dial data of the xlsx file format. The CS stops to read the file at following index parameter: Param1 = rowIndex Param2 = columnIndex 1

770465 24350 sc sccfgconfigfilemgrc.cc Reading the persistent configuration data file /home/data/scconfigpersistentdata.txt failed. Param 1: status (KvpAttributeState) 1

770466 24351 sc sccfgconfigfilemgrc.cc Writing the persistent configuration data file /home/data/scconfigpersistentdata.txt failed. Param 1: status (KvpAttributeState) 1

770639 24352 sc sccfgdialerusertemplatec.cc Failed to open template or config file. Param 1: 0 = failed to open template (dialer-user.txt) 1 = failed to open config file (dialer_<userNr>.cfg) 1

770650 24353 sc sccfgdialerc.cc Failed to create 'dialer' directory. Param 1: userId Param 2: errno 1

770651 24354 sc sccfgdialerc.cc Failed to remove 'dialer' directory. Param 1: userId Param 2: errno 1

772380 24355 sc sccfgaastrasipcountrysettingsc.cc No aasip_country_settings.txt file available - using hard coded default values! 1

772706 24356 sc scallbackuprestoreextensionc.cc

Could not add file to auto backup file Param 1 NOT reported anymore(after R40 step 72) =0 file: /home/data/localisation/localisation_customized.txt =1 file:

/home/data/localtime.txt =2 MOL only /home/data/moleim.txt =3 files from /home/data/modconfig/ =4 file: /home/crash/licinfo.htm =5 file: /home/data/licence.txt 4

772707 24357 sc scallbackuprestoreextensionc.cc Could not create directory like /home/data or /home/data/localisation or /home/data/ Param1: errno Param2: location 6

772709 24358 sc scallbackuprestoreextensionc.cc Failed to extract file from zip Param1: 0= /home/data/localisation/localisation_customized.txt 1= /home/data/localtime.txt 2

773020 24359 sc scaimsterminalprofile.cc

ScAimsTerminalProfile::getTerminalProfileData A TpTerminalProfile instance has no associated TpTerminalSpec instance. This is not allowed. See br55853. Params: 1. The

(telephone) number of the user with the invalid terminal profile (or the subsId, if the user number could not be determined). 2. The number of the TpTerminalProfile that is

invalid. 3. The value of the associated TpTerminalSpec instance (should be 0xFF in this error case). How to fix: With WebAdmin, go to the user specified by parameter 1. Look at

the terminal profiles. The one with the number specified by parameter 2 (which should also be labelled as unknown terminal or something similar) is invalid and must be deleted. 3

773089 24360 sc sccfgaaipmactemplatec.cc Failed to open file. 1

773594 24361 sc sccfgdialeraastratemplatec.cc Failed to open file. 1

774564 24362 sc sccfgaastrasiptimezonesc.cc Deleting the local Aastra SIP time zones file (aasip_time_zones.txt) failed! 1

774565 24363 sc sccfgaastrasiptimezonesc.cc Renaming the Aastra SIP time zones file (aasip_time_zones.txt) failed! 1

774566 24364 sc sccfgaastrasiptimezonesc.cc No aasip_time_zones.txt file available - using hard coded default values! 1

774925 24365 sc sccfglanguageprocc.cc the 'sccfglanguageprocc' process receives a command with a unknown language file category. param 1 = command 0/1/2/3/4 - 2

774926 24366 sc sccfglanguageprocc.cc In "ScCfgPbxLangFileAccessC::getLanguageFileList", the 'versiontag' of the language file is missing. Param1 = language file category (0 - 8) see ScPbxLangPackEnuC. 3

778015 24367 sc sccfgsipproviderconfigfilemgrc.cc The directory does not exists! No files will be deleted! 1

778913 24368 sc scimpimportexportcontainer.cc function ScImpImportExportContainerC::getMDTKeyMode: scImpKeyType not expected. 1

778931 24369 sc scimpreaderwriterxlsxc.cc Something went wrong by writing key data in a xlsx file format. The CS stops to write the file at following index parameter: Param1 = rowIndex Param2 = columnIndex 1

778932 24370 sc scimpreaderwriterxlsxc.cc Something went wrong by reading key data of the xlsx file format. The CS stops to read the file at following index parameter: Param1 = rowIndex Param2 = columnIndex 1

779597 24371 sc sccfg67xxilangfileaccessc.cc Unpacking the standard language .zip file failed. 1

780072 24372 sc sccfg6000istartuptftptemplatec.cc Failed to open startup.cfg file in the tftp directory for writing. 1

781948 24373 sc scimpimportexportmdtc.cc Error in function ScImpImportExportMdtC::getLimits. The User and Terminal limits of a platform are not defined. 1

782160 24374 sc sccfgremotefileaccessc.cc Not allowed to access FTP server with this method! 1

782323 24375 sc sccfgconfigfilemgrc.cc Configuration File Manager: Handle localization language - unknown command! Param 1: language file download category (ScPbxLangPackEnuC) Param 2: command 3

782326 24376 sc sccfgconfigfilemgrc.cc Configuration File Manager: Handle localization language - Could not start process! Param 1: language file download category (ScPbxLangPackEnuC) Param 2: command 1

782328 24377 sc sccfgconfigfilemgrc.cc Configuration File Manager: Handle localization conf command - unknown language file download category! 1

782329 24378 sc sccfgconfigfilemgrc.cc Configuration File Manager: Handle localization conf command - unknown command! Param1: language file download category (ScPbxLangPackEnuC) Param2: command 2

782918 24379 sc scaimsuseracc.cc The password update of the Linux accounts "admin" or "root" has failed. 1

783112 24380 sc scimpimportexportmdtc.cc Function ScImpImportExportMdtC::read is called with unexpected sheet. 1

783113 24381 sc scimpimportexportmdtc.cc Function ScImpImportExportMdtC::save is called with unexpected sheet. 1

783114 24382 sc scimpimportexportmgrc.cc Function ScImpImportExportManagerC::importSheet couldn't find the sheetGroup or sheetGroup is not implemented. 1

783115 24383 sc scimpimportexportmgrc.cc Function ScImpImportExportManagerC::exportSheet couldn't find the sheetGroup or sheetGroup is not implemented. 1

783116 24384 sc scimpreaderwriterxlsx.cc Function ScImpReaderWriterXlsxC::writeFile got an unexpected sheet. 1

783604 24385 sc scimpreaderwriterxlsxc.cc Function ScImpReaderWriterXlsxC::readFile is called with unexpected sheet. 1

783667 24386 sc scimpimportexportmgrc.cc Could not delete file or directory! 1

786967 24387 sc sccfg67xxiterminalc.cc Failed to open/create the <mac>.cfg file in the TFTP directory. Param1: deviceId 1

787017 24388 sc sccfgconfigfilemgrc.cc Configuration file template missing! Param 1: template (ArCfgFileTemplateEnuC) - template that is missing 3

787018 24389 sc sccfgconfigfilemgrc.cc Configuration file template available! Param1: template (ArCfgTemplateEnuC) - template that is available again 2

787353 24390 sc scaimsaastrasipterminal.cc Failed to find the terminal to where the SIP credentials should be sent to Reference: br59200:MDT 9.11 : Send Registration Credentials by Email - usabiliy improvment Param1: 1

787749 24391 sc scaimsipaddressblocking.cc No response for signal within timeout. param1: MajorMinor 1

790273 24392 sc scaimsvoicemailbox.cc Existing mailbox was deleted because a new mailbox was assigned to the user! Param1: deleted mailbox id Param2: new mailbox id Param3: user id 1

791270 24393 sc sccfgdevicec.cc Warning while generating Emergency Dial Plan; Exceeding limit of 512 characters for Emergency Dial Plan as too many entries in Public Emergency Numbers table. 2

791309 24394 sc scallbackuprestorehandlerc.cc Restore or make a backup file of the licence file failed for some reason. 1

629164 26001 st stinit.c Call logging default values could not be initialised for this country. 1

629363 26002 st stspooler.c Send array overflow. 1

629639 26004 st stspooler.c Call Data Write Error 1

629986 26005 st sttaxcontrol The charge acquisition block for call logging in stChargeCompletion was not found. 1

630016 26006 st stinit.cc During the a warmstart there are missing charge related objects as individual charge counter, surcharge curve, surcharge range, charge specification and charging alarm. 1

630081 26007 st stxasynchbridge.cc error mapping StNumAnalEnuC to XaNumAnalEnuC 1

630184 26008 st stxasynchbridge.cc error in the mapping of XaNumAnalEnuC to StNumAnalEnuC in xaToStMapNumAnalEnu [D [D [D (defaut switch). 1

630683 26009 st stchgcontrol.cc

The address of a SemiPersistent CAQ block is not found! This errorid only exists in i5 and pre-i5 software releases. For external calls the software generates a tax ticket, which

contains all the charge information for later printing in various formats (pc5, pc4 ...) Until the call is finished the tickets are stored in semi-persistent ram afterwards the ticket info

is going to be stored in the database). The errorid is unfortunately used in multiple places within stchgcontrol.cc (that's why it was corrected later for i6 etc). Basically it could

mean that: - no semipersistent ram was available when initiating a new call (ram shortage, too many calls already running, software problem) --> consequence: there is no

charge information for this particular call - the semipersitent tax info was not found when completing the call (this is very odd! I'd say this is a software bug, maybe related to the

trunk losses mentioned in the post as well) --> consequence: there is no charge information for this particular call - the semipersitent tax info was not found when splitting the 2

630910 26010 st stchgcontrol.cc «Individual Charge Counter» object (XaIndividualChargeCounter) had to be created as none was found (for this subscriber,cost centre, trunk or channel group) in the database. 1

630914 26011 st stchgcontrol.cc The enum of «TransferModeC» has been extended without adapting all the switch statements that make use of it 1

630915 26012 st stchgcontrol.cc the enum of the class «ChargingStateC» has been extended without adapting all the switch statements that make use of it 1

630916 26013 st stchgcontrol.cc The enum of the class «XaAccountTypeC» has been extended without adapting all the switch statements that make use of it 1

630917 26014 st stchgicl.cc The address of the SemiPersistent CAQ block is no good 1

630944 26015 st stspooler.cc The St Spooler State Machine got an unexpected event. 1

630945 26016 st stspooler.cc There is already a running timer, but only one is allowed. 1

631223 26017 st stallinit.cc On system startup, specifically st-domain startup, it was detected that the number of «XaIndividualChargeCounter» database objects does not correspond to the required value. 1

631224 26018 st stallinit.cc On system startup, specifically st-domain startup, the call to the method «findNumberOf()» of «XaIndividualChargeCounter» database object failed. What's wrong with the 1

631225 26019 st stallinit.cc

On system startup, specifically st-domain startup, it was detected that the number of either the «XaSurchargeCurve» or the «XaSurchargeRange» database objects did not

correspond to the required value. The database lost some ICC objects. The missing objects were recreated and initialzed with the default values. 1

631226 26020 st stchgcontrol.cc In function «copyCaqDramToNewFlash()», which is called by stChgChargeCompletion(), the pointer to the semipersistent charge acquisition object was found to be NULL. 1

631227 26021 st stchgcontrol.cc In function «stChgChargeCompletion()» the pointer to the semipersistent charge acquisition object «caqSpP» was found to be NULL. Taxes maybe lost! 1

631228 26022 st stchgcontrol.cc In function «stChgChargeCompletion()» the pointer to the semipersistent charge acquisition object «caqSpP» was found to be NULL. Taxes maybe lost! (second occurence in func) 1

631229 26023 st stchgcontrol.cc In function «mustBeJournaled()», which is called by stChgChargeCompletion(), the pointer to the semipersistent charge acquisition object «caqSpP» was found to be NULL. 1

631230 26024 st stchgcontrol.cc In function «newSession()», the call to stChgChargeListAppend() failed. As a consequence we can get a new semipersistent charge acquisition object to store the taxes! 1

631231 26025 st stchgcontrol.cc In function «makeSplit()», the call to stChgChargeSearch() for --Outgoing-- failed. As a consequence we can get a charge acquisition object to store the taxes! 1

631232 26026 st stchgcontrol.cc In function «makeSplit()», the call to stChgChargeSearch() for --Incoming-- failed. As a consequence we can get a charge acquisition object to store the taxes! 1

631233 26027 st stchgcontrol.cc In function «taxAccountIncr()»: for --XaAccountTypeC::ChargeBusiness-- An «Individual Charge Counter» object (XaIndividualChargeCounter) had to be created as none was found 1

631234 26028 st stchgcontrol.cc In function «taxAccountIncr()»: for --XaAccountTypeC::ChargeData-- An «Individual Charge Counter» object (XaIndividualChargeCounter) had to be created as none was found in 1

631235 26029 st stchgcontrol.cc In function «taxAccountIncr()»: for --XaAccountTypeC::ChargeCostCentre-- An «Individual Charge Counter» object (XaIndividualChargeCounter) had to be created as none was 1

631236 26030 st stchgcontrol.cc In function «taxAccountIncr()»: for --XaAccountTypeC::ChargeTrunk-- An «Individual Charge Counter» object (XaIndividualChargeCounter) had to be created as none was found in 1

631237 26031 st stchgcontrol.cc In function «taxAccountIncr()»: for --XaAccountTypeC::ChargeTrunkPrimary-- An «Individual Charge Counter» object (XaIndividualChargeCounter) had to be created as none was 1

631243 26032 st stspooler.cc

The method StSpoFormatDataC::formatTime converts the «duration» in seconds of a call into hours, minutes and seconds. The output formats only support strings of the format

«ddHddMdd», where d is in the range 0..9 As a consequence, we can not handle duration values bigger than 360'000 secs. But receiving such a value, which corresponds to ~ 4days

4hours is indicating a problem --> has memory been overwritten? 1


The function computeDuration() calculates the duration of a call in seconds and stores it using the method setDuration(). Later when printing, we can only print duration values up

to 360000 seconds, which fit into the output format «ddHddMdd», where d is in the range 0..9 As a consequence, we can not handle duration values bigger than 360'000 secs. But

receiving such a value, which corresponds to ~ 4days 4hours is indicating a problem --> has memory been overwritten? 1


The function computeDuration() calculates the duration of a call in seconds and stores it using the method setDuration(). This errorReport deals with the second part of the func -->

Incoming Call-Logging Later when printing, we can only print duration values up to 360000 seconds, which fit into the output format «ddHddMdd», where d is in the range 0..9 As a

consequence, we can not handle duration values bigger than 360'000 secs. But receiving such a value, which corresponds to ~ 4days 4hours is indicating a problem --> has memory 1

643313 26035 st stspooler.c Allocating a buffer for call logging data failed. 1


The ChargeSpecification instance in the DB for this Trunk/bundle doesn't exist or can't be found. There is an inconsistence in the DB. Check if the CountrySetting really exists which

is defined for this trunk/bundle. This might be a versiontransfer problem probably from i66 to i7. 2nd parameter is the PortRef. 3rd is the Channelgroup 2

748161 26037 st stspooler.cc CL printer overflow. 1

748162 26038 st stspooler.cc CL printer overflow gone. 1

761459 26039 st stspooler.cc A Ticket to OpenCount should sent a TimeToAnswer value of over 999s. This would cause an endless repeat of the tax ticket, therefore the value is changed to 0s. param 1= TTA 2

773343 26040 st stspooler.cc Out of range Value of an attribute to be sent to OpenCount. param_3 identifies the attribute in question This is usually caused by an external application sending us wrong 2

791476 26041 st stsposmdrserverc.cc A connection was requested from an TCP/IP address/port that does NOT match the configured one. Parameter 1: configured TCP/IP address Parameter 2: requesting TCP/IP 3

791478 26042 st stsposmdrserverc.cc Failed to open the downstream interface 2

791479 26043 st stsposmdrserverc.cc Call to listen failed 2

791492 26044 st stsposmdrserverc.cc Alarm SX200CDRLinkUp Reference: br59543: MDT 10.02: R40HOT NAP1: emulate SX-200 PMS interface (PMS/VM/CDR) 3

791493 26045 st stsposmdrserverc.cc Alarm SX200CDRLinkDown Reference: br59543: MDT 10.02: R40HOT NAP1: emulate SX-200 PMS interface (PMS/VM/CDR) 2

628961 28001 dl dlpmx.c process has a priority higher than exclusion prio 1

628962 28002 dl dlpmx.c FreeSemaphore called without ReserverSem called before 1

628963 28003 dl dlpmx.c devP == NULL ! 1

628964 28004 dl dlpmx.c devP == NULL ! 1

628965 28005 dl dlpmx.c routeP == NULL! 1

628966 28006 dl dlpmx.c routeP == NULL! 1

628967 28007 dl dlpmx.c uncompatible state 1

628968 28008 dl dlpmx.c routeP == NULL ! 1




628972 28012 dl dlpmx.c routeP == NULL 1

628973 28013 dl dlpmx.c invalid proutId 1


628975 28015 dl dlpmx.c incompatible state 1






628982 28021 dl dlpmx.c sigP->dataP == NULL ! 1

628983 28022 dl dlpmx.c incompatilbe state 1

628984 28023 dl dlpmx.c invalid proutId / 1


628986 28025 dl dlpmx.c change mode not allowed for this type of device 1

628987 28026 dl dlpmx.c devP==NULL ! 1


628989 28028 dl dlpmx.c devP==NULL! 1


628991 28030 dl dlpmx.c devP==NULL 1

628992 28031 dl dlpmx.c devP == NULL; 1




628996 28035 dl dlpmx.c device not found 1
















629012 28051 dl dlpmx.c *dataPP==NULL 1




629016 28055 dl dlpmx.c *dataPP==NULL 1


629018 28057 dl dlpmx.c device in transp state and no route found 1

629020 28058 dl dlskt.c invalid route Id 1

629023 28059 dl dlpmx.c devId invalid 1

629024 28060 dl dlskt.c Send Allowed message contained incorrect socket id. 1

629025 28061 dl dlskt.c currentPrio <= exclusion prio 1

629026 28062 dl dlskt.c FreeSem called whithout presious Reserve 1

629028 28063 dl dlskt.c invalid socket id 1

629029 28064 dl dlskt.c socketIdP == NULL 1

629030 28065 dl dlskt.c sig pointer from PRT is NULL 1

629032 28066 dl dlprt.c invalid route id 1

629033 28067 dl dlprt.c incompatible route state 1

629034 28068 dl dlprt.c dlPrtSend: SendAllowed returns FALSE 1

629035 28069 dl dlpmx.c sigP == NULL 1

629036 28070 dl dlpch.c sigP == NULL 1

629037 28071 dl dlpch.c route not found (invalid route Id) 1

629038 28072 dl dlpch.c sigP->dataP == NULL 1

629039 28073 dl dlprc.c unexpected major received 1

629040 28074 dl dlpch.c dlPchHandle: unexpected signal received 1

629041 28075 dl dlpch.c send procId == OseProcIdUndef 1

629049 28076 dl dlpch.c newState: routeP==NULL 1

629050 28077 dl dlpch.c dlPchCreateResp: sigP==NULL 1

629051 28078 dl dlpch.c dlPchReleaseReq: sigP==NULL 1

629052 28079 dl dlpch.c dlPchReleaseConf: sigP==NULL 1

629053 28080 dl dlpch.c dlPchSend: sigP==NULL 1

629054 28081 dl dlpch.c dlPchAck: sigP==NULL 1

629055 28082 dl dlpch.c dlPchCreateResp: routeP==NULL 1

629056 28083 dl dlpch.c dlPchReleaseReq: route not found 1

629057 28084 dl dlpch.c dlPchReleaseConf: route not found 1

629058 28085 dl dlpch.c dlPchSend: route not found 1

629059 28086 dl dlpch.c dlPchAck: route not found 1

629060 28087 dl dlcph.c dlPchRemoteCreateResp : route not found 1

629061 28088 dl dlpch.c dlPchRemoteRelReq: route not found 1

629062 28089 dl dlpch.c dlPchRemoteRelConf: route not found 1

629063 28090 dl dlpch.c dlPchRemoteData: route not found 1

629064 28091 dl dlpch.c dlPchRemoteAck: route not found 1

629065 28092 dl dlpmx.c dlDevSendUsConnectReq: invalid devId 1

629066 28093 dl dlpmx.c dlDevSendUsConnectConf: invalid devId 1

629067 28094 dl dlpmx.c dlDevSendUsReleaseReq: invalid devId 1

629068 28095 dl dlpmx.c dlDevSendUsReleaseConf: invalid devId y 1

629069 28096 dl dlpmx.c dlDevUsXon: invalid devId 1

629070 28097 dl dlpmx.c dlDevSendUsData: invalid devId 1

629071 28098 dl dlpmx.c dlDevSendUsDataAck : invalid devId 1

629072 28099 dl dlskt.c dlSktRouteCreateResp: invalid routeId 1

629073 28100 dl dlskt.c dlSktRotueReleaseReq: invalid routeId 1

629074 28101 dl dlskt.c dlSktRouteData: invalid routeId 1

629075 28102 dl dlskt.c dlSktRouteDataAck: invalid routeId 1

629076 28103 dl dlskt.c dlSktGetSocketId: invalid routeId 1

629077 28104 dl dlpmx.c dlPmxRteDsCreateResp: sigP==NULL 1

629078 28105 dl dlpmx.c dlPmxRteDsReleaseReq: sigP==NULL 1

629079 28106 dl dlpmx.c DsReleaseConf: sigP==NULL 1

629080 28107 dl dlpmx.c RteDsData: sigP==NULL 1

629081 28108 dl dlpmx.c RteDsDataAck: sigP==NULL 1

629082 28109 dl dlprt.c handlePrtData: invalid localEndpoint 1

629083 28110 dl dlprt.c handlePrtData: invalid remoteEndpoint 1

629084 28111 dl dlprt.c handlePrtCreateReq: invalid localEndpoint 1

629085 28112 dl dlprt.c handlePrtCreateReq: invalid remoteEndpoint 1

629086 28113 dl dlprt.c handlePrtCreateResp: invalid localEndpoint 1

629087 28114 dl dlprt.c handlePrtCreateResp: invalid remoteEndpoint 1

629088 28115 dl dlprt.c handlePrtDataAck: invalid localEndpoint 1

629089 28116 dl dlprt.c handlePrtDataAck: invalid remoteEndpoint 1

629090 28117 dl dlprt.c handlePrtReleaseReq: invalid localEndpoint 1

629091 28118 dl dlprt.c handlePrtReleaseReq: invalid remoteEndpoint 1

629092 28119 dl dlprt.c handlePrtReleaseConf: invalid localEndpoiin 1

629093 28120 dl dlprt.c handlePrtReleaseConf: invalid remoteEndpoint 1

629094 28121 dl dlprt.c dlPrtSend: invalid route Id 1

629095 28122 dl dlprt.c dlPrtSendAllowed: invalid routeId 1

629096 28123 dl dlprt.c dlPrtGetAddresses: invalid routeId 1

629097 28124 dl dlskt.c handleSktAccept: invalid socketId 1

629098 28125 dl dlskt.c handleSktData: invalid socket id 1

629099 28126 dl dlskt.c handleSktDataAck: invalid socketId 1

629100 28127 dl dlskt.c handleSktClose: invalid socketId 1

629101 28128 dl dlskt.c dlSktRouteData: invalid socketId 1

629102 28129 dl dlskt.c dlSktRouteDataAck: invalid sockId 1

629103 28130 dl dlskt.c dlSktSynchConnect: invalid socketId 1

629104 28131 dl dlskt.c dlSktAsyncConnect: invalid socket id 1

629105 28132 dl dlskt.c dlSktBind: invalid socketId 1

629106 28133 dl dlskt.c dlSktAsynchAccept: invalid socketId 1

629107 28134 dl dlskt.c dlSktSynchAccept: invalid socketId 1

629108 28135 dl dlskt.c dlSktSendTo: invalid socketId. 1

629109 28136 dl dlskt.c dlSktRecvFrom: invalid socketId 1

629110 28137 dl dlskt.c dlSktClose: invalid socketId. 1

629111 28138 dl dlskt.c dlSktGetAddresse: invalid socketId 1

629112 28139 dl dlskt.c dlSktRouteCreateResp: sigP==NULL 1

629113 28140 dl dlskt.c dlSktRouteReleaseReq: sigP==NULL 1

629114 28141 dl dlskt.c dlSktRouteData: sigP==NULL 1

629115 28142 dl dlskt.c dlSktRouteDataAck: sigP==NULL 1

629116 28143 dl dlprt.c handlePrtDataAck: incompatile state 1

629130 28144 dl dlskt.c dlSktSend: *dataPP pointer invalid 1

629131 28145 dl dlskt.c dlSktSendTo: invalid *dataPP pointer 1

629132 28146 dl dlskt.c dlSktSend: invalid socketId 1

629277 28147 dl dlpmx.c dlPmxResetLocalMode: locDataP == NULL 1

629312 28148 dl dldev.c DevRegister: device already registered 1

629354 28149 dl dlprt.cc Invalid socket family 1

629355 28150 dl dlskt.cc Socket protocol family not supported 1

629358 28151 dl dlpsm.cc NULL signal pointer received in dlPsmRouteCreateReq() 1

629359 28152 dl dlpsm.cc Invalid port route ID in dlPsmRouteCreateReq() 1

629361 28153 dl dlpsm.cc Unexpected message 1

629365 28154 dl dlpsm.cc dlPsmRouteData() NULL signal pointer 1

629366 28155 dl dlpsm.cc dlPsmRouteData() invalid port route ID 1

629368 28156 dl dlskt.cc Invalid socket ID 1

629369 28157 dl dlskt.cc Invalid socket ID 1

629371 28158 dl dldev.cc Invalid devId passed to findRouteOnDevice() 1

629372 28159 dl dlskt.cc Invalid socket ID passed in connect message 1

629373 28160 dl dlskt.cc Invalid socket ID passed in accept message 1

629374 28161 dl dlskt.cc Invalid socket ID passed in data message 1

629375 28162 dl dlskt.cc Invalid socket ID passed in DataAck message 1

629382 28163 dl dlskt.cc findListener(): Unknown family 1

629383 28164 dl dlpsmppp.cc unrecognised protocol passed to PPP dsData() 1

629508 28165 dl dlskt.c /* Fail if no connection has been set up */ 1

629511 28166 dl dlskt.c A Delivery Confirmed socket cannot use the synchronous send. Only the Asynchronous send is possible in the case 1

629595 28167 dl dlfusose.c Fusion TCP/IP stack to OSE interface 1

629607 28168 dl dlskt.c Invalid address family 1

629611 28169 dl dlskt.c Failed to create Fusion socket. 1

629617 28170 dl dlskt.c Unexpected minor message type in fusionProc() 1

629618 28171 dl dlskt.c Unexpected major message type in fusionProc() 1

629620 28172 dl dlskt.c Fusion send() failed. 1

629621 28173 dl dlskt.c select() failed 1

629622 28174 dl dlskt.c recv() failed 1

629623 28175 dl dlskt.c Unrecognised protocol family for Fusion socket. 1

629624 28176 dl dlskt.c No more PPP Devices. 1

629625 28177 dl dlfusose.c os_critical() called while already in critical region. 1

629626 28178 dl dlfusose.c os_normal() called while not in critical region. 1

629627 28179 dl dlfusose.c Wrong level passed to os_normal(). 1

629629 28180 dl dlfusose.c Invalid major message type to dlFusEchoProc() 1

629630 28181 dl dlfusose.c dlFusEchoProc() failed to bind. 1

629632 28182 dl dlskt.c Fusion ACCEPT_NOTIFY failed to create server socket. 1

629640 28183 dl dlskt.c/cc Fusion bind failed 1

629649 28184 dl dlskt.cc Socket Not Allocated 1

629660 28185 dl dlfusose.cc PPP throwing DS data away. 1

629737 28186 dl dlfusose.cc Failed to bind telnet listener 1

629739 28187 dl dlskt Failed to creat Fusion route with ll_config() 1

629804 28188 dl dlskt.c/cc ppp_onechar_input() failed. 1

629814 28189 dl dlskt.cc Failed to allocate buffer for Fusion DS sends. 1

629815 28190 dl dlskt.cc Socket pool pointer is null 1

629816 28191 dl dlskt.cc Fusion listen failed. 1

629817 28192 dl dlfusose.c Datalinks is trying to have a sleep and we don't allow that do we? 1

629818 28193 dl dlskt.cc Attempt to create a socket before datalinks has been initialised. 1

629823 28194 dl dlprc Unexpected Fusion minor message type. 1

629826 28195 dl dldev.cc Datalen is zero 1

629827 28196 dl dlskt.cc Datalen is zero 1

629828 28197 dl dlprt.cc Datalen is zero 1

629830 28198 dl dlprt.cc currentPrio <= exclusion prio 1

629831 28199 dl dlprt.cc FreeSem called whithout previous call to Reserve 1

629832 28200 dl dlskt.cc Unexpected dlskt minor type 1

629833 28201 dl dlfusose.cc Unexpected message received 1

629860 28202 dl dlfusose.cc Failed to allocate an 'm' structure for a message from MIPR 1

629905 28203 dl dlskt.cc Unrecognized 'Intern' port. 1

629906 28204 dl dlskt.cc Invalid PPP dev ID. 1

629921 28205 dl dlfusose.cc The Fusion tick process received an unexpected message. 1

629932 28206 dl dlfuslkheap.c Freeing buffer which is already free. 1

629974 28207 dl dlprt.cc freeEndpoint(): invalid routeId . 1

629996 28208 dl dlskt.cc The received buffer from the application is too big, a memory leak will occur. 1

630059 28209 dl dlmasynchbridge.cc Error Mapping DlTbxMenuEnuC to MaTbxMenuEnuC - undefined value 1

630098 28210 dl dlskcsrv.cc the server socket has a problem 1

630108 28211 dl dlfuslkheap.cc Freeing buffer with inconsistent parameters. 1

630109 28212 dl dlfuspppbs.cc Try to store more characters than allowed. 1

630169 28213 dl dlskt.cc unackSentCnt will go negative in dlSktRouteDataAck()!! 1

630204 28214 dl dlprc.cc Failed to add ethernet interface route. 1

630406 28215 dl dlprt.cc Unknown address type 1

630457 28216 dl dlskt.cc dlSktAsynchSendTo NULL dataP 1

630458 28217 dl dlskt.cc dlSktAsynchSendTo() dataLen == 0 1

630459 28218 dl dlskt.cc Invalid socket ID in dlSktSendTo(). 1

630460 28219 dl dlskt.cc App trying to send data to a socket which is not connected. P1 is the socket ID. 1

630481 28220 dl dldev.cc Unexpected DsDataAck. 1

630485 28221 dl dlskt.cc Fusion news arrived, but there is no Fusion socket process for this socket!! P1 is the dlSockId, P2 is the news. 1

630502 28222 dl dlskt.cc No process attached to a valid socket. 1

630511 28223 dl dldst.cc The XaInternPrinter has to be related to a device which is a V24 or a PA, this is none of it. 1

630517 28224 dl dlallinit.cc Database problem: A unique instance is neither found nor created! 1

630518 28225 dl dlallinit.cc The file with the ethernet settings was found but there was a reading problem. Ethernet IP settings are set to factory default. 1

630528 28226 dl dlfuspppfsm.cc Pointer to PPP session not the same as pointer to ned tdevice which points to a PPP session. 1

630538 28227 dl dldev.cc Urecognised absolute number. 1

630546 28228 dl dlskcsrv.cc the variable myOutString is full 1

630628 28229 dl dldev.cc dlDevSendDsData() called while blocked! 1

630674 28230 dl dlskt.cc fusion socket failed in close. Param 1 is the fusion error id. 1

630680 28231 dl dldst.cc dlDestination tries to send data before establishing a connection 1

630692 28232 dl dldev.cc DlDevUsXon() received a NULL signal pointer. 1

630693 28233 dl dlskt.cc DlSktAsynchSend() - Invalid socket ID 1

630695 28234 dl dlfuslkheap.ccc Fusion heap memory corrupted. We are going to crash soon 1

630696 28235 dl dldev.cc dlDevDsData() dataP == NULL 1

630737 28236 dl dlprc.cc DLEthernet instance was not found in the database. Seems to be that the DB is corrupt. The system should be reseted or crashed. 1

630738 28237 dl dlallinit.cc The address range configured for PPP server assigned addresses is not large enough. p0=start address, p1=end address, p2=required size 1

630739 28238 dl dlallinit.cc fnP is NULL!! How can this be? 1

630740 28239 dl dlfusose.cc Attempt to delete a non PPP route from the routing table was blocked. P0=devName, P1=ipAddress, P2=0 1

630743 28240 dl dlprt.cc Failed to add gateway entry to routing table with ll_route() P0=err, P1=0, P2=0 1

630746 28241 dl foo.hh test id 1

630780 28242 dl y Call to select when the set is empty! 1

630787 28248 dl dlskt.cc Stray dsPppConnSigP signal arrived? P1 = sockId, P2 = proutId, P3 = Sender Proc ID 1

630788 28249 dl dlprt.cc Unexpected releaseReq P1 = localEndpoint, P2 = remoteEndpoint, P3 = current state 1

630789 28250 dl dlskt.cc monitor() overflowed the buffer!!! P1 = buffer, P2 = length, P3 = MaxLength 1

630802 28251 dl dldestination.cc Something went wrong with the dest object linked to the internal printer. P1: (UInt32)printerId P2: (UInt32)dev.getPortId() 1

630803 28252 dl dldestination.cc INET system call failed. P1: stackError 1




630807 28256 dl dldestination.cc INET system call failed. ioctl() P1: stackError 1

630808 28257 dl dldestination.cc INET system call failed. close() P1: stackError 1

630809 28258 dl dldestination.cc We couldn't add a requested route for some reason. P1: source IP address P2: remote IP address P3: INET response status 1

630810 28259 dl dldevdataflow.cc We have no valid procid so we can not respond to the request. An application will hang forever!!! 1

630811 28260 dl dldevdevicemux.cc The reinterpret_cast failed. P1: (UInt32)DlDevRegisterSignal 1

630812 28261 dl dldevdevicemux.cc The reinterpret_cast failed. P1: (UInt32)DlDevDeregisterSignal 1

630813 28262 dl dldevdevicemux.cc The reinterpret_cast failed. P1: (UInt32)DlDevDsDataSignal 1

630814 28263 dl dldevdevicemux.cc The reinterpret_cast failed. P1: (UInt32)DlDevAckDsDataSignal 1

630815 28264 dl dldevdevicemux.cc The reinterpret_cast failed. P1: (UInt32)DlDevDsDataGramSignal 1

630816 28265 dl dldevdevicemux.cc The reinterpret_cast failed. P1: (UInt32)DlDevUsDataSignal 1

630817 28266 dl dldevdevicemux.cc The reinterpret_cast failed. P1: (UInt32)DlDevAckUsDataSignal 1

630818 28267 dl dldevdevicemux.cc P1: device port ref (SmPortReferenceC) P2: device channel (DlDevChannel) 1

630819 28268 dl dldevdevicemux.cc The reinterpret_cast failed. P1: (UInt32)DlDevAckUsDataGramSignal 1

630820 28269 dl dldevdevicemux.cc The reinterpret_cast failed. P1: (UInt32)DlDevCloseSignal 1

630821 28270 dl dldevdevicemux.cc The reinterpret_cast failed. P1: (UInt32)DlDevStatusSignal 1

630822 28271 dl dldevdevicemux.cc The reinterpret_cast failed. P1: (UInt32)DlDevReleaseResponseSignal 1

630823 28272 dl dldevdevicemux.cc The reinterpret_cast failed. P1: (UInt32)DlDevOpenSignal 1

630824 28273 dl dldevdevicemux.cc The reinterpret_cast failed. P1: (UInt32)DlDevDeviceMonitorLevelSignal 1

630825 28274 dl dldevdevicemux.cc The reinterpret_cast failed. P1: (UInt32) DlDevChangeOwnershipSignal 1

630826 28275 dl dldevdevicemux.cc The reinterpret_cast failed. P1: (UInt32) DlDevDeviceBusySignal 1

630827 28276 dl dldevdevicemux.cc No valid signal handler has been found. P1: (UInt32)MinorOf(aSignalP->sig) 1

630828 28277 dl dldevdevicemux.cc A driver tries to register a device which already exists! P1: device port ref (SmPortReferenceC) P2: device channel (DlDevChannel) 1

630829 28278 dl dldevdevicemux.cc Someone tries to open a device which the flow control value is not balanced. P1: device port ref (SmPortReferenceC) P2: device channel (DlDevChannel) 1



630832 28281 dl dldevdevicemux.cc A requested error signal handler is not defined. P1: minor signal typ (0DlDevMinorEnum) 1

630833 28282 dl dldevdevicemuxinterface.cc We have no valid DlDevDriverProxyC pointer! P1: Driver Proc Id 1

630834 28283 dl dldevdevicemuxinterface.cc The data length is 0! P1: Driver Proc Id 1





630839 28288 dl dldevdriverproxy.cc We have a no valid DlDevDeviceC pointer. P1: Driver Proc Id 1




630843 28292 dl dldevdsdataflow.cc The socket level sends us unexpected data. P1: device port ref (SmPortReferenceC) P2: device channel (DlDevChannel) P3: device state (DlDevState) 1

630844 28293 dl dldevdsdataflow.cc The socket level sends us unexpected data. P1: device port ref (SmPortReferenceC) P2: device channel (DlDevChannel) P3: device state (DlDevState) 1

630845 28294 dl dldevdsdataflow.cc The socket level sends us unexpected data. The data gets destroyed. P1: device port ref (SmPortReferenceC) P2: device channel (DlDevChannel) P3: device state (DlDevState) 1

630846 28295 dl dldevdsdataflow.cc The socket level sends us an ack too much! P1: device port ref (SmPortReferenceC) P2: device channel (DlDevChannel) P3: device state (DlDevState) 1

630847 28296 dl dldevdsdataflow.cc We got an unexpected ack from the socket layer! P1: device port ref (SmPortReferenceC) P2: device channel (DlDevChannel) P3: device state (DlDevState) 1

630848 28297 dl dldevdsdatagramflow.cc We have a mix of stream and datagram acks! P1: device port ref (SmPortReferenceC) P2: device channel (DlDevChannel) P3: device state (DlDevState) 1

630849 28298 dl dldevservicehandler.cc There is a missing status handler. P1: device port ref (SmPortReferenceC) P2: device channel (DlDevChannel) P3: device status (DlDevStatusEnum) 1

630850 28299 dl dldevservicehandler.cc We got an unexpected release response! P1: device port ref (SmPortReferenceC) P2: device channel (DlDevChannel) P3: device state (DlDevState) 1

630851 28300 dl dldevservicehandler.cc We can not change the ownership of a device because it is not allocated. P1: device port ref (SmPortReferenceC) P2: device channel (DlDevChannel) P3: the given proc id 1

630852 28301 dl dldevsocketproxy.cc The reinterpret_cast failed. P1: device port ref (SmPortReferenceC) P2: device channel (DlDevChannel) P3: Application Proc Id 1

630853 28302 dl dldevsocketproxy.cc The OSE gives us a null pointer! P1: device port ref (SmPortReferenceC) P2: device channel (DlDevChannel) P3: Application Proc Id 1

630854 28303 dl dldevsocketproxy.cc no valid DlDevDeviceC pointer P1: Application Proc Id 1

630855 28304 dl dldevsocketproxy.cc The reinterpret_cast failed. P1: Application Proc Id 1

630856 28305 dl dldevsocketproxy.cc The socket layers passed us 0 data. P1: Application Proc Id 1



630859 28308 dl dldevsocketproxy.cc The receive failed. P1: Application Proc Id 1


630861 28310 dl dldevusdataflow.cc The driver sends still data even though he got a stop. P1: device port ref (SmPortReferenceC) P2: device channel (DlDevChannel) P3: device state (DlDevState) 1

630862 28311 dl dldevusdataflow.cc We have no upstream socket interface where we can send the data to! P1: device port ref (SmPortReferenceC) P2: device channel (DlDevChannel) P3: device state (DlDevState) 1

630863 28312 dl dldevusdataflow.cc We can not send any data in this state. The driver must be broken! P1: device port ref (SmPortReferenceC) P2: device channel (DlDevChannel) P3: device state (DlDevState) 1

630864 28313 dl dldevusdataflow.cc We got an ack from the socket too much! P1: device port ref (SmPortReferenceC) P2: device channel (DlDevChannel) P3: device state (DlDevState) 1

630865 28314 dl dlsktasyncclientsocket.cc The user has not opened a ds interface yet->coding error. 1

630866 28315 dl dlsktasyncserversocket.cc It is not allowed to call listen() after open()->coding error. 1

630867 28316 dl dlsktasyncserversocket.cc No downstream interface->maybe coding error. 1

630868 28317 dl dlsktasyncserversocket.cc No downstream interface (open failed). 1

630869 28318 dl dlsktasyncserversocket.cc Maybe a coding error (user has opened a downstream interface). 1

630870 28319 dl dlsktasyncsocket.cc On this stage the downstream interface must exist. 1

630871 28320 dl dlsktbsdsocket.cc INET system call failed. getsockname() 1

630872 28321 dl dlsktbsdsocket.cc sigP->bsdSocketP != this 1

630873 28322 dl dlsktdownstreameventinterface.cc No such socket family. 1

630874 28323 dl dlskteventhandlerproc.cc Null pointer has been detected. P1: socketId P2: errorNo P3: datalinks error 1

630875 28324 dl dlskteventhandlerproc.cc INET sytem call failed. getsockname() P1: (UInt32)stackError 1

630876 28325 dl dlskteventhandlerproc.cc INET sytem call failed. accept() P1: stackError 1

630877 28326 dl dlskteventhandlerproc.cc Socket id is invalid. 1

630878 28327 dl dlskteventhandlerproc.cc Attempt to bind the socket failed. P1: inetSocketId P2: stackError 1

630879 28328 dl dlskteventhandlerproc.cc Attempt to listen() failed. P1: inetSocketId P2: stackError 1

630880 28329 dl dlskteventhandlerproc.cc INET system call failed. close() P1: stackError 1

630881 28330 dl dlskteventhandlerproc.cc The socket is not there, but it should be. 1

630882 28331 dl dlskteventhandlerproc.cc INET system call failed. select() P1: (UInt32)stackError 1

630883 28332 dl dlsktsocketmanager.cc Only one instance of the same socket is allowed to store within the socket container. 1

630884 28333 dl dlsktsocketmanager.cc The desired socket instance has not been found within the socket container. 1

630885 28334 dl dlskttcpiptransportinterface.cc Invalid socket type. 1

630886 28335 dl isskteventhandlerproc.cc INET system call failed. P1: stackError P2: Dl Error p3: bsdSocketP 2

630887 28336 dl dlskttcpsocket.cc INET system call failed. ioctl() P1: stackError 1

630888 28337 dl dlskttcpsocket.cc INET system call failed. setsockopt() P1: mySocketId P2: stackError 1

630889 28338 dl dlskttcpsocket.cc INET system call failed. setsockopt() P1: mySocketId P2: stackError 1

630890 28339 dl dlskttcpsocket.cc The connect() attempt failed. Tell it to the application. P1: stackError 1

630891 28340 dl dlskttcpsocket.cc INET system call failed. send() P1: stackError 1

630892 28341 dl dlskttcpsocket.cc INET system call failed. recv() P1: stackError 1

630893 28342 dl dlskttcpsocket.cc INET system call failed. close() P1: stackError 1

630894 28343 dl dlskttcpsocket.cc INET system call failed. accept() P1: stackError 1

630895 28344 dl dlskttcpsocket.cc INET system call failed. getsockname() P1: error 1

630896 28345 dl dlskttcpsocket.cc The error was not handled P1: (UInt32)error 1

630948 28346 dl dlskteventhandlerproc.cc Invalid parameter to add. 1

630949 28347 dl dlskteventhandlerproc.cc SockInfo not found. 1

630955 28348 dl dlskteventhandlerproc.cc Socket not known during connect() 1

630956 28349 dl dlskteventhandlerproc.cc Socket mis-match in handleWriteNotification(). 1

630968 28350 dl dlskteventhandlerproc.cc Zero is not a valid error reported by INET (no error). But INET nevertheless reports this error via INET_ERRNO event. This error is currently treated as "no error". 1

630969 28351 dl dlskteventhandlerproc.cc The INET TCP/IP stack has reported an error which we do not know. This error is treated as a Datalinks internal "DlTypErrUnknown" error. 1

630971 28352 dl dlskteventhandlerproc.cc The INET system call inet_recvfrom() failed. Check the global INET errno variable to see the reason. The errno variable is passed as an argument of this error report. 1

630972 28353 dl dlsktudpsocket.cc Since UDP is a connection less protocol, 'connectTo()' cannot be called. 1

630973 28354 dl dlsktudpsocket.cc For datagram sockets there is no error handler in the socket class library. Errors are handled directly (passed as reference from the app down to the eventhandler process), and the 1

630974 28355 dl isskteventhandlerproc.cc

The BSD socket send failed for some reason.send() failed. param1: BSD socket descriptor param2: the stack error param3: application port (stack error = 0x41) else the amount of

data stack error (short summary): 0xd -->Permission denied (using IP broadcast.., etc.) 0x40 --> host is down 0x41 --> no route to host (host is not reachable via the given

network) /appl/enea/OSE5.5.1/include/errno.h (for further information) errno.h The outcome of this error is as the UDP/TCP socket will be closed. Server sockets may re-open 3

630975 28356 dl dlskteventhandlerproc.cc ipstack socket id already in mapper! 1

630976 28357 dl dlskteventhandlerproc.cc BSD socket pointer already in mapper! 1

630978 28358 dl dlskteventhandlerproc.cc Sockinfo not found in connect() 1

630999 28359 dl dlskteventhandlerproc.cc Invalid argument to add to the socket mapper 1

631094 28360 dl dlskteventhandlerproc.cc The pendingSendfo.dataP is not NULL! Memory leak and software error! 1

631119 28361 dl dldestination.cc We couldn't remove a route for some reason. 1

631163 28362 dl dlsktasyncsocket.cc An application which has set his socket options to 'DlTypSocketProtocolDeliveryConfirmation' has sent an empty buffer. Such an application may block because the delivery conf 1

631179 28363 dl dlsktasyncsocket.cc addSocket() failed. 1

631181 28364 dl dldst.cc invalid socket id 1

631203 28365 dl dldst.cc make() returned NULL. 1

631218 28366 dl dlskcsrv.cc

This errorid replaces 28228 for the i6 project and upwards. Description: The outgoing data queue is full. There is a problem in the derived class (monitor xy). It sends too much data.

Maybe the process priority of the monitor is too low or the bandwith of the data link is too small (e. g. PA). More flow control than inside this class must be implemented in the

derived class (monitor xy). 1

631242 28367 dl dlskcsrv.cc The wrong process has called stop() 1

631246 28368 dl dlskteventhandlerproc.cc select() told us we could send, but when we tried, 0 bytes were sent 1

631247 28369 dl dlskteventhandlerproc.cc We received a write notification for a socket that is not expecting one. 1

631264 28370 dl dlsktasyncserversocket.cc Opening an internet socket failed! 1

631265 28371 dl dlsktasyncserversocket.cc The listen command failed! A server is not listening again. 1

631266 28372 dl dlsktasyncserversocket.cc The requested socket family is unknown! 1

631267 28373 dl dlsktserversocket.cc Unregognised address. 1

631268 28374 dl dlsktasyncserversocket.cc NULL pointer 1

632217 28375 dl dlskteventhandlerproc.cc connect() failed and the error was not EINPROGRESS 1

632218 28376 dl dlskteventhandlerproc.cc connect() succeeded and it should always fail with the error EINPROGRESS 1

632470 28377 dl dlskcsrv.cc Someone tried to send a NULL pointer 1

632475 28378 dl dlskcsrv.cc Found a NULL pointer on myOutDataQueue. There should not be any NULL pointers on this queue. 1

634364 28379 dl dlskt.cc Data buffer failed sanity checks. 1

635515 28380 dl dlsktbsdsocket.cc Proxy timeout waiting for reply from event handler. 1

635518 28381 dl dlsktasyncserversocket.cc makeLocalConnection() timedout waiting for response. 1

636074 28382 dl dlsktasynctpktserversocket.cc Corrupt TPKT packet header 1

636078 28383 dl dlsktasynctpktserversocket.cc A server is being destroyed, but it still has an incomplete incoming packet that has not been forwarded to the application. This packet will now be trashed. 1

636079 28384 dl dlsktasynctpktserversocket.cc Some blighter handed us a NULL pointer in an incoming data. 1

636080 28385 dl dlsktasynctpktserversocket.cc A contiuation of a TPKT packet arrived, but there was not enough room for it? 1

637730 28386 dl dlsktasynctpktserversocket.cc dynamic_cast failed! 1

640404 28387 dl dlskteventhandlerproc.cc find was going to return a dud pointer. It will now return NULL instead. 1

642203 28388 dl dlsktupstreamdeveventinterfaceproxy. Unrecognised minor. 1

642512 28389 dl dlskcsrv.cc

My out data queue is currupt and has been cleared. Memory has probably leaked as a result, though it may not have as the corruption may have been caused by the process dying,

in which case the memory was all freed automatically by OSE and the pointers were pointing to free memory anyway. 1

645489 28390 dl dldestination.cc NULL instance pointer in signal. 1

646211 28391 dl dlprx.cc Unexpected signal 1

646343 28392 dl dlskteventhandlerproc.cc Unexpected QoS tag type 1

646344 28393 dl dlskteventhandlerproc.cc QoS settings not found 1

648642 28394 dl dldestination.cc DlTcpIpDestination object not found! 1

648645 28395 dl dldestination.cc Unrecognised address family 1

648684 28396 dl dlsktasyncsocket.cc There are a few reasons for this error: - The DNS server(s) have not been configured (in case DHCP is disabled) - The host name is not known within the DNS system - The DNS 2

648716 28397 dl dldestination.cc Failed to get PPP login information. 1

648873 28398 dl dldestination.cc DlDestination is neither an IP destination nor a Printer destination? 1

648993 28399 dl dldestination.cc Unexpected DlDstProxy signal 1

650098 28400 dl dlsktupstreamdeveventinterface.cc devAddressP is NULL in sendDatagram(). 1

652672 28401 dl dlsktbsdsocket.cc We got no answer from the event handler process within the MaxResponseTime. 1

652761 28402 dl dlsktdownstreameventinterface.cc The call to setSocketOptions() is not supported by the current Socket family. 1

653737 28403 dl dldestination.cc Duplicated instance in the container. 1

653738 28404 dl dldestination.cc Requested instance not found. 1

655995 28405 dl dlsktudpsocket.cc Since UDP is a connection less protocol, 'listenOn()' cannot be called. 1

657496 28406 dl dlskclst.cc General error for all dlskclst... functionality. 1

663248 28407 dl dlsktudpsocket.ch It's a must to have a valid destination address for a UDP destination. 1

666202 28408 dl dlasyncsocket.cc DNS lookup failed, check the DNS server configuration or use static addressing 1

668171 28409 dl dlsktasynctpktsocket.cc Prevent a memory leak. 1

670736 28410 dl dldevservicehandler.cc Proc ID not known to report release response. 1

695232 28411 dl dlskclstfork.cc The start up confirmation from the just created dynamic process has not arrived within a reasonable time window. Parameter 1 Application Port as hex. 1

698114 28412 dl dlskclstfork.cc General dlskc framework problem. Timing issue.... 1

702617 28413 dl dlskttcpiptransportinterface.cc Dynamic cast failed. Close connection after a time is only for TCP sockets available. 1

702619 28414 dl dlsktdevicetransportinterface.cc Dynamic cast failed. Dev Address is not good. 1

706991 28415 dl dlsktasyncserversocket.cc Ip multicast is only for UDP available. 1

735362 28416 dl dlsktasyncsslclientsocket.cc No Signaling Encryption License Available 1

749189 28417 dl dlsktasyncsslserversocket.cc An SSL error occurred while sending/receiving data. Param1: Caller (see file for exact location) Param2: Error (see ERR_get_error in the SSL documentation) Param3: IP address 2

750358 28418 dl dlsktasyncsocket.cc bufferedSend() had a bit of an overflow! 1

759886 28419 dl dlskcserversocket.cc Server pointer is NULL. 1

760250 28420 dl dlsktasyncsslclientsocket.cc An SSL error occurred while sending/receiving data. Param1: Caller (see file for exact location) Param2: Error (see ERR_get_error in the SSL documentation) Param3: IP address 1

764052 28421 dl dlsktasyncsslserversocket.cc An SSL client has reported that our server certificate is out of date. P1: our service port P2: peer port P3: peer IP addresss 1

764053 28422 dl dlsktasyncsslserversocket.cc The SSL peer as reported that our server certificate is untrusted. The peer must import our trusted certificated (export with WebAdmin/AMS). P1: our service port P2: peer port 1

764056 28423 dl dlsktasyncsslserversocket.cc The SSL peer hasn't sent the requested client certificate for some reason. P1: our service port P2: peer port P3: peer IP addresss 1

782704 28424 dl dlsktasyncdestination.cc Failed to create the SSL context instance. 1

629285 30001 dp dpbridges.c trying to send signal to not existing l3dpsProc 1

629356 30002 dp fdlsdl.c ConnInd not handled by DLC in this state. 1

629596 30003 dp fdlsdl.c DLC has received a non-connection-handover ConnInd while in one of its release pending states. This will cause a software reset for this handset. 1

629633 30004 dp l3dpscont Default Error Id for dps process 1

629634 30005 dp l3dpscont CC message discarded. 1

629635 30006 dp l3dpscont DLC message discarded 1

629636 30007 dp l3dpscont MM message discarded 1

629637 30008 dp l3dpscont Message received for unknown component. 1

629646 30009 dp l3dpscont SW Reset (for some reason) 1

629650 30010 dp l3dpscont.c Tried to create a new instance but failed as it already existed. Params: Id, Type, State of existing instance. 1

629651 30011 dp l3dpscont.c invalid instance type 1

629652 30012 dp l3dpscont.c unexpected or unrecognised message 1

629654 30013 dp fdlsdl.c Unexpected DiscInd or DiscCfm from original link. 1

629717 30014 dp l3dpscont dps state information 1

629718 30015 dp fdlsdl DiscInd received in unknown DLC state 1

629719 30016 dp flcsdl LCE received message from DLC in an invalid state 1

629720 30017 dp l3dpscont DiscInd received for non-existing DLC instance 1

629825 30018 dp fdlsdl FDX_DATA_SWITCH_IND received by DLC in a state other than OPEN 1

629859 30019 dp l3dpscont.cc Problem with SBC mon 1

629867 30020 dp flcsdl Problem with table ind in LCE. 1

630023 30021 dp dpallqueue.cc Tried to access an unknown queue type. 1

630024 30022 dp dpallqueue.cc tried to store a dps message which contains an invalid (>255) instance-id. 1

630025 30023 dp dpdlcdlsdl.cc DLC received unexpected TgTi (Timer expiry) message 1

630026 30024 dp dpdlcdlsdl.cc DLC received unexpected TgDe message 1

630027 30025 dp dpdlcdlsdl.cc DLC received unknown DPS message 1

630028 30026 dp dpdlcsdl.cc DLC received expiry of timer DL04 in an unexpected state. 1

630032 30027 dp dpdlcdlsdl.cc DLC received ReleaseRes in unexpected state. 1

630033 30028 dp dpdlcdlsdl.cc DLC received ReleaseReq in unexpected state. 1

630043 30029 dp dpdlcdlsdl.cc DLC received release req from LCE with an unknown release type 1

630065 30030 dp dpmasynchbridge.cc error mappping DpTraceCompEnuC to MaTraceCompEnuC 1

630076 30031 dp dpnwklclib.cc Sending a signal to a DPS NWK instance without an entry in the LCE routing table or nxisting NWK instance. 1

630078 30032 dp dpnwklclib.cc LCE link state is LINK_RELEASED, but lceTable is not cleared. 1

630079 30033 dp dpnwkccsdl.cc When nwk entity is created, the lcetable entry for the entity is not empty (InActive). 1

630092 30034 dp dpiwummpcont.cc mmp received a message with an invalid length 1

630093 30035 dp dpiwummpcont.cc mmp process received a message it didn't recognise (invalid minor) 1

630094 30036 dp dpiwummpcont.cc mmp process received a message it didn't recognise (invalid major) 1

630095 30037 dp dpiwummpcont.cc mmp received an message with an invalid destination 1

630170 30039 dp dpnwkcomsp.cc Unexpected message in COMSP 1

630177 30040 dp dpnwkcomspc.cc ComspC initialised with Undef handsetId. 1

630180 30041 dp dpiwudtuc.cc DTU error. 1

630181 30042 dp fdlprocs.c Only for test purposes to see wether the "dl04" problem as described in br12791 really appears by the customer. 1

630185 30043 dp dpalldtpcont.cc Error reporting for dtp related errors, including the DLE. No errors are critical, but they are important for debugging pr up purposes. 1

630192 30044 dp dpdlcrbclib.cc Link in RBC table is not in-use (maybe not allocated or maybe cleared already) 1

630193 30045 dp dpdlcrbclib.cc link has an invalid value 1

630218 30046 dp dpdlcrbcsend.cc Message couldn't be sent. 1

630508 30048 dp dplogcont.cc

unexpected or unrecognised message. Parameters: 1. Signal type (Major/Minor) 2. signal prio NOTE: Before I6.6 (step 52), this error number was used for a whole range of

errors in the dplog component. You need to look at the code to see this. The information held here was completely useless, which is why I've reused this number. (See also

br31022). 3

630520 30049 dp dplogcont.cc

The handler did not free or re-use the signal buffer. Parameters: 1. Signal type (Major/Minor) NOTE: Before I6.6 (step 52), this error number was used for a whole range of

errors in the dplog component. You need to look at the code to see this. The information held here was completely useless, which is why I've reused this number. (See also

br31022). 3

630549 30050 dp dpdtsdlehsinswupdate.cc exceeded max. no. of (air software donwload related) requests to hs 1

630590 30051 dp dlehsinswupdatec.cc There is an error in the reply(to a request) from the handset. 1

630595 30052 dp dplogwritefsc.cc Could not close the directory stream. This could end with a crash because of missing detaches. 1

630596 30053 dp dpdlcrbcspec.cc Special message (My Multiframe Info is) received from SB unexpectedly. 1

630597 30054 dp dpiwummplib.cc PortableId Check in dpIwuMmpMmLocateInd failed. 1

630598 30055 dp dpiwummplib.cc Location Registration failed: HS is (!Registered)&&((!NotRegistered)||(!Subscribed)) 1

630599 30056 dp dpnwkmmprocs.cc Starting of a new FT procedure failed 1

630605 30057 dp dpmonmonitor.cc Error occured in dpmon or extension monitors 1

630609 30058 dp dpdtshmec.cc Error in HME component 1

630610 30059 dp dpmondevice.cc Error in handset/system base remote monitor 1

630617 30060 dp dpdtsdlehsinswupdatec.cc Download failed(Threshold2 reached)! SwUpdateBarred sent to handset 1

630620 30062 dp dpdlcdlsdl.cc fdl_release_cfm_cnt is unexpectedly 0 1

630621 30063 dp dpdlcrbcspec.cc The systemBase made a second MFIReq. This happen if we did not get the myMFI message of the SB which started up as second. 1

630623 30064 dp dpnwkmmlib.cc Wrong authentication key received. It must be UAK or AC. 1

630624 30065 dp dpnwkmmlib.cc TPUI is not present in the DectMmLocateAcceptRes message. 1

630625 30066 dp dpnwkmmprocs.cc Wrong PT reply to the FT initiated key allocation procedure. 1

630626 30067 dp dpnwkmmprocs.cc Wrong PT-reply message to the TEMP_ID_ASSIGN (LocateAccept) message from the FT. 1

630627 30068 dp dpnwkmmprocs.cc Wrong PT reply message to the FT initiated terminate access rights procedure 1

630629 30069 dp dpnwkmmsdl.cc NW_LC_ENCRYPT_CFM received in an unexpected LinkState 1

630630 30070 dp dpnwkmmsdl.cc NW_LC_MM_RELEASE_CFM received in an unexpected state of the process 1

630631 30071 dp dpnwkmmsdl.cc A signal has been received in an unexpected MM state. 1

630632 30072 dp dpnwkmmsdl.cc Minor of a signal not recognised. 1

630633 30073 dp dpnwkmmsend.cc dpAllDbReadDck failed. 1

630639 30074 dp dpiwummplib.cc The handset.findUnique(handsetId) failed in checkSWVersionLocReq. If this happens the HS gets 'Get a new Hs Sw' and is blocked. 1

630646 30075 dp dpalldblib There is no unique network with the expected ID 1

630653 30076 dp dpdlcdlsdl.cc SB didn't answer DiscInd within dlrel time. 1

630678 30077 dp dpnwkccsdl.cc CC received a CC_MM_CIPHER_CFM_E with result 0 during a FTNWCC_INCOMING_NORMAL_LINK or FTNWCC_INCOMING_SERVICE_LINK. 1

630679 30078 dp dpnwkccsdl.cc CC received a CC_MM_CIPHER_CFM_E with result 0 during a FTNWCC_OUTGOING_NORMAL_LINK or FTNWCC_OUTGOING_SERVICE_LINK. 1

630684 30079 dp dpiwummplib.cc NULL != contextP[LocationContext][handsetId] 1

630687 30080 dp dpalldblib.cc The maximum of system bases for this system is reached. No more system bases will be created in dp. 1

630708 30081 dp dpalldblib.cc All system base id's are used in this location area 0. No more DectSystemBase object will be created in LA0. 1

630728 30082 dp dpdlcrbccont.cc ConnInd received with default pmId and no I-frame. 1

630732 30083 dp dpdlcrbccont.cc The type of I frame was not regonized in a ConnInd message 1

630735 30084 dp dpmonmonitor.cc Unknown signal received by DpMonC 1

630736 30085 dp dpmonmonitor.cc Undefined or incorrect identifier value returned from DB 1

630946 30086 dp dpalldblib.cc Startup conditions for system base not fulfilled. There are system bases available in other location areas than LA 0. 1

630979 30087 dp dpsmsproc.cc An error with signal/instance handling in SMS process 1

630985 30088 dp dpalldblib.cc System base with inRpn does not exist. 1

630986 30089 dp dpalldblib.cc DeviceId already exists in another system base object. 1

630987 30090 dp dpalldblib.cc DeviceId not accepted for the SB object with this RPN. 1

630988 30091 dp dpalldblib.cc RFPISentToDeviceId != devId1 or devId2 during start up of the secondary AD2-Interface. 1

630995 30092 dp dpsmstl.cc Error in SMS TPDU. 1

630996 30093 dp dpsmstl.cc SMS TL protocol error. 1

630998 30094 dp dpnwklctablec.cc getFreeTv has been called, but there is already a tv in the table! 1

631001 30096 dp dpsmsrl.cc SMS RL protocol error 1

631002 30097 dp dpsmsrl.cc Error in SMS RPDU 1

631088 30098 dp dpiwusmppsms.cc Error in conversion between SMPP-like PDUs and SMS-TP PDUs. 1

631108 30099 dp dpiwummplib.cc Unexpected subscription state during desubscription. 1

631120 30100 dp dpdtsdlehsinswupdatec.cc PBX received EraseInd from handset, which should not happen. 1

631122 30101 dp dpalldpscont.cc dpsSwResetNeeded because of a 'hanging' dps instance. For more information have a look in the parameters. 1

631125 30102 dp dpalldpscont.cc DectSwResetReq received from CPE and still a CC entity active. 1

631126 30103 dp dpdlcrbccont.cc The RBC table hasn't been cleared properly. It needs to be cleaned up for this HsId. 2

631129 30104 dp dpdlcrbcsend.cc DsrInd received to not existing link. 1

631130 30105 dp dpdlcrbccont.cc Attempt to assign a B-Channel without existing link. 1

631131 30106 dp dpalldblib.cc Unexpected or wrong IPUI type. 1

631132 30107 dp dpalldblib.cc Unexpected or wrong portable id type. 1

631133 30108 dp dpiwummplib.cc Location registration to undef LA. 1

631134 30109 dp dpiwummplib.cc AuthKeyType not supported. 1

631135 30110 dp dpalldblib.cc SystemBase with inDevId not found. 1

631136 30111 dp dpalldblib.cc SystemBase with inBaseId not found. 1

631137 30112 dp dpalldblib.cc D3Ad2Device with inDeviceId not found. 1

631138 30113 dp dpalldblib.cc D3Ad2Device with inPortRef and chanId not found. 1

631139 30114 dp dp*.cc DpDectHandset or DpDectHandsetData object with HsId not found. 3

631140 30115 dp dpalldblib.cc Location area with inLaId not found. 1

631141 30116 dp dpalldblib.cc No default location area available. 1

631142 30117 dp dpalldblib.cc Location area not found. (navigateUniqueR3FromDpDectSystemBase failed). 1

631143 30118 dp dpalldblib.cc No DpDectNetwork available. 1

631144 30119 dp dpiwummplib.cc ARI check failed. 1

631145 30120 dp dpdlcrbcroute.cc Location area not found (navigateUniqueR2FromDpDectHandset failed). 1

631193 30121 dp dpalldblib.cc inPortRef == SmPortReferenceC::Undef 1

631194 30122 dp dpalldblib.cc Device with inPortId/devChanId not found. 1

631195 30123 dp dpalldblib.cc System Base with inRPN not found. 1

631216 30124 dp dpiwuccu.cc Problem with CC-IWU. 1

631239 30125 dp dpiwummplib.cc Hs performs a location registration, but its HsType is undef in the DB. 1

631251 30126 dp dpdlcrbcspec.cc Delayed myMFI message received. 1

631252 30127 dp dpdlcrbcspec.cc mfiGetIndex reached UInt8Max! 1

631261 30128 dp dpdlcdlsdl.cc

DpsDl04Expired. parameters: inDataP->state, inDataP->fdl_flag_1, inDataP->fdl_flag_2, inDataP->fdl_tx_q->iFrame[0]), fdl_tx_q->iFrame[1], inDataP->fdl_tx_q->iFrame[2],

inDataP->fdl_tx_q->iFrame[3], // TiPd inDataP->fdl_tx_q->iFrame[4]),// MessageType 0, dpAllDbGetLaIdSbId(portRef), // LaIdSbId inSigP->tgTiDpsTimeout.inst.id)); // HsId 2

631287 30129 dp dpdlcrbcmon.cc incorrect signal•• [3~ 1

631292 30130 dp dpdlcrbcmux.cc Firs••und•handled signal in dprbcmux. 1

631294 30131 dp dpnwkcissc.cc Default CISS constructor without HsId used. 1

631295 30132 dp dpnwkcissc.cc Unknown Minor received by CISS. 1

631296 30133 dp dpnwkcissc.cc Protocol profile in {FACILITY} failed. 1

631297 30134 dp dpnwkcissc.cc No <<FACILITY>> IE in {FACILITY} message. 1

631298 30135 dp dpnwkcissc.cc Misuse of Connectionless TI. 1

631299 30136 dp dpnwkcissc.cc Wrong Ti for CLP (CLSS). 1

631300 30137 dp dpnwkcissc.cc Unexpected message received in this state. 1

642415 30138 dp dpdlcrbcspec.cc Unexpected SpecMsgReqMFI received by a PBX with the new MFC concept. 1

645597 30139 dp dpnwkmmsdl.cc locate_accept_res_msg != NULL when entering in iwuMmLocateAcceptRes(..). 1

645719 30140 dp dpnwkmmsdl.cc MM received an DpsDectadReleaseReqE. This errorlog has been introduced to check if this case ever happens (this code is in since 1996 and nobody knows today what it is 1

645728 30141 dp dpnwkccsdl.cc

CC received an DpsDectadReleaseReqE. This errorlog has been introduced to check if this case ever happens (this code is in since 1996 and nobody knows today what it is needed

for. If this error never occurs, the code can be removed. Check also for errorid 30140 (same message for MM). 1

648006 30142 dp dpdlcdlsdl.cc DLC received a dataInd when the "early send" flag was set. This means that handset and PBX are in different states. 1

648055 30143 dp dp* DpDectHandsetData object with HsId not found 1

648488 30144 dp dpiwuccu.cc Unexpected Dect signal minor received by CC-IWU. 1

649300 30145 dp dpiwummplib.cc TpTerminal with TerminalId not found. 1

649717 30146 dp dpiwummplib.cc Creation of handsetData object failed. 1

649718 30147 dp dpiwummplib.cc dpAllDbReadPortableId failed. 1

650623 30148 dp dpalldblib.cc D3Device with devId not found. 2

650628 30149 dp dpalldblib.cc Second port on a SB8 on different node than the fist port. 1

652570 30150 dp dpdlcrbc*.cc RBC - Incorrect "Ad2Received" message size received from the PRX 1

653046 30151 dp dpdlcrbctypes.hh Creation of an already existing rbc portRef Map element. 1

653047 30152 dp dpdlcrbctypes.hh Removing of an already removed rbc portRef Map element. 1

654214 30153 dp DpRcpProcC::getActiveSbProps the system was unable to determine the system base type 1

654270 30154 dp DpRcpProcC::getActiveSbProps The device id of a system base has become invalid although the system base is still flagged as active 1

655844 30155 dp dpdlcrbccont.cc uPortRef of at least one link is undef. Info about the normal link. 1

655845 30156 dp dpdlcrbccont.cc uPortRef of at least one link is undef. Info about the handover link. 1

669861 30157 dp dplog*.cc Unexpected signal received by one of the dplog objects. Parameters: 1. Signal type (Major/Minor) 2. Object type (see enum DpLogObjEnu in dplog.hh) 3. state - if the object has 1

669898 30158 dp dplog*.cc Trying to set the state to an invalid value: Parameters: 1. Object type (see enum DpLogObjEnu in dplog.hh) 2. existing state [set to 0xFF if we don't know the old state] 3. new 3

669901 30159 dp dplogbuild.cc Can't convert one of the parameters needed into a string. Parameters: 1. The sort of "thing" that can't be converted. Tells the meaning of the next parameter. (look in code to 1

669903 30160 dp dplogcollectc.cc & dplogdata.cc Can't find the required instance. Parameters: 1. object type (see enum DpLogObjEnu in dplog.hh) 2. the id of the instance that could not be found) 2

669904 30161 dp dplog*.cc Action not allowed/expected in this state. Parameters: 1. object type (see enum DpLogObjEnu in dplog.hh) 2. the current state of the object 3. a number (unique within object) 2

669907 30162 dp dplogdata.cc Invalid port reference Parameters: 1. object type (see enum DpLogObjEnu in dplog.hh) 2. port reference 2

669908 30163 dp dplog*.cc Invalid / unknown / unexpected log type Parameters: 1. object type (see enum DpLogObjEnu in dplog.hh) 2. log type (see DpLogTypeEnu in dploglib.hh) 2

669916 30164 dp dplog*.cc Couldn't create the object we wanted. Parameters: 1. object type (see enum DpLogObjEnu in dplog.hh) of the object trying to create. 2. myLogType (see DpLogTypeEnu in 4

669917 30165 dp dplogcontrolc.cc No log string. Parameters: 1. object type (see enum DpLogObjEnu in dplog.hh). Will always be "Controller". 2. myLogType (see DpLogTypeEnu in dploglib.hh) of this controller. 3. 1

669918 30166 dp dplogcontrolc.cc

Major problem encountered in one of the logging objects. This error is reported by the controller and the logging of this type is stopped. Parameters: 1. object type (see enum

DpLogObjEnu in dplog.hh) of the logging object that encountered the problem. 2. myLogType (see DpLogTypeEnu in dploglib.hh) of this controller. 2

670132 30167 dp dplogwritefsc.cc Trying to delete a file that is in use. Parameters: 1. errno (return from file system 2 & 3. first 8 characters of file name 1

670138 30168 dp dplogwritefsc.cc Can't open file. Parameters: 1. 1 if trying to write; 2 if trying to read 2 & 3. First 8 characters of file name. 2

670140 30169 dp dplogwritefsc.cc File only partly written. Parameters: 1. Number of bytes written 2. Total number of bytes in file 1

670141 30170 dp dplogwritefsc.cc String only partly copied into buffer Parameters: 1. Number of bytes written 2. Total number of bytes in string 1

670142 30171 dp dplogwritefsc.cc Can't allocate buffer - requested length is too great. Parameters: 1. requested length 2. MaxBufSize 1

670143 30172 dp dplogwritefsc.cc Can't read from tmp file Parameters: 1. return value from fsEfsFread 1

670145 30173 dp dplogwritefsc.cc Can't write to output file Parameters: 1. return value from fsEfsFwrite 1

670148 30174 dp dplog*.cc Wrong / invalid / unknown destination type in timeout signal. Parameters: 1. object type (see enum DpLogObjEnu in dplog.hh) 2. destination type in timeout signal 1

670149 30175 dp dplogcomm.cc Wrong instance Parameters: 1. object type (see enum DpLogObjEnu in dplog.hh) 2. id of this instance 3. instance id in received signal 1

670150 30176 dp dplogcollectc.cc Data collector object exists when it shouldn't. (Or to be more accurate, the pointer is not NULL!) Parameters: 1. DpLogObjCollector 2. myLogType 3

670279 30177 dp dplogcollectc.cc The log data instance either does not exist or is not yet complete. Parameters: 1. DpLogObjCollector 2. myLogType 3. 1 if instance does not exist; 2 if not complete 1

670281 30178 dp dplogcollectc.cc Pointer to DpLogCommC instance should be NULL and it isn't. Parameters: 1. DpLogObjCollector 2. myLogType 3. instance Id 2

670282 30179 dp dplogcollectc.cc & dplogdata.cc Problem with inserting an instance in my list/map Parameters: 1. object type (see enum DpLogObjEnu in dplog.hh) 2. myLogType (only for dplogcollectc - else 0) 3. instance id 3

670283 30180 dp dplogcollectc.cc Too many instances filled, Parameters: 1. object type (see enum DpLogObjEnu in dplog.hh) 2. number of instances filled 1

670284 30181 dp dplogdata.cc Instance is already in the map, when we're trying to add it. Parameters: 1. object type (see enum DpLogObjEnu in dplog.hh) 2. instance id 2

670285 30182 dp dplogdata.cc Problem with removing an instance from map. Parameters: 1. object type (see enum DpLogObjEnu in dplog.hh) 2. instance id 1

670286 30183 dp dplogdata.cc Invalid type. Parameters: 1. object type (see enum DpLogObjEnu in dplog.hh) 2. id (port ref) 3. type 2

670287 30184 dp dplogdata.cc One of the location areas is undef Parameters: 1. object type (see enum DpLogObjEnu in dplog.hh) 2. both location areas 3. state 1

670288 30185 dp dplogdata.cc Unexpected state of location area data. Parameters: 1. object type (see enum DpLogObjEnu in dplog.hh) 2. both location areas 3. state 2

672249 30186 dp dpiwummplib.cc TermStartRes indicating false during location registration received. 1

680527 30187 dp dpdlcrbccont.cc Wrong data received from RM in SwitchDeassignCfm message 1

680529 30189 dp dpdlcrbccont.cc Data consistency check for SwitchDeassignCfm failed 1

680530 30190 dp dpdlcrbccont.cc Wrong data in case of CrBChanDeassToHandsetId 1

680534 30191 dp dpdlcrbccont.cc deAssignTimer could not be started 1

680555 30192 dp dpdlcrbccont.cc Invalid data in RbcStartDeAssignTimer signal 1

680560 30193 dp dpdlcrbccont.cc deAssignTimerExpired 1

680588 30194 dp dpdlcrbccont.cc SwitchResponse message missing from RM 1

680602 30195 dp dpdlcrbccont.cc Invalid chanId in function startDeAssignTimer(chanId) 1

680606 30196 dp dpdlcrbccont.cc Invalid chanId in function stopDeAssignTimer(chanId) 1

680612 30197 dp dpdlcrbccont.cc Invalid chanId in function isDeAssignTimerRunning(chanId) 1

680616 30198 dp dpdlcrbccont.cc Invalid chanId in function initDeAssignTimer(chanId) 1

680644 30199 dp dpdlcrbccont.cc Attempt to start DeAssignTimer which is already running 1

701847 30200 dp dpnwkmmlib.cc dpNwkMmLibKillProcess called 1

705476 30201 dp dpsmsrl.cc TPDU data size too big 1

705558 30202 dp dpnwkccsend.cc SendCipherReq failed due to wrong component 1

705584 30203 dp dpnwkccsend.cc Send AbortCipheringReq failed due to wrong component 1

705594 30204 dp dpnwkmmsdl.cc Invalid minor received in ccMmCipherReq(..) 1

705609 30205 dp dpnwkmmsdl.cc Invalid minor received in ccMmAbortCipheringReq(..) 1

705623 30206 dp dpsmsrl.cc SMS: RP-ERROR 1

705641 30207 dp dpiwusmppsms.cc DpSmsTpFcsError 2

705746 30208 dp dpalldblib.cc No Handset associated to this subscriber 1

705747 30209 dp dpalldblib.cc No subscriber associated to this handset 3

705777 30210 dp dpnwkptp.cc Unknown (new) IE 1

705811 30211 dp dpnwkptp.cc Optional IE content error 1

705812 30212 dp dpnwkptp.cc Mandatory IE missing 1

705816 30213 dp dpnwkptp.cc Irrecoverable Message Error 1

705817 30214 dp dpnwkptp.cc Mandatory IE Content Error 1

705868 30215 dp dpnwkptp.cc Optional IE Content Error 1

705907 30216 dp dpnwkptp.cc Invalid protocol discriminator 1

705941 30217 dp dpnwkptp.cc Unknown (new) message type 1

707393 30218 dp dpalldblib.cc DpDectHandset with termId not found 1

707394 30219 dp dpalldblib.cc No DpDectHandsetTypeC match with TpTermTypeC TpTermVersionC 1

710925 30220 dp dpdlcdlprocs.cc A message containing more than 2 segments has been received. (Currently can't be handled in Tp, so rejected here at DLC level). Parameters: handset-id 1

710967 30221 dp dpdlcdlprocs.cc Incoming message discarded by DLC - because something went wrong with the segmentation. Parameters: handset-id, length of discarded messge, first 4 bytes of discarded 1

710968 30222 dp dpdlcdlprocs.cc DLC received wrong segment type. (Should not be possible - sw bug?) Parameters: handset id, frame type 1

712467 30223 dp dpiwummplib.cc Unexpected registration state during location registration Parameter1: HandsetId (HEX) Parameter2: State: enum Undef, Detached, Attaching, 3

712468 30224 dp dpiwummplib.cc Missing <<IWU-TO-IWU>> info within the location context 2

712469 30225 dp dpiwummplib.cc Missing location context information (while handling DectLocateAcceptSentInd) 2

712470 30226 dp dpdtsdoac.cc Unexpected MajorDect signal received 1

712471 30227 dp dpdtsdoac.cc Unexpected MajorTgDt signal received 1

712472 30228 dp dpdtsdoac.cc Unknown DOA return value received 1

712473 30229 dp dpdtsdoac.cc DOA return value received for a hsId which is not in the list 1

712474 30230 dp dpdtsdoaupdatec.cc Unexpected MajorDect signal received 1

712475 30231 dp dpdtsdoaupdatec.cc Unknown L3DeEtpDoa msgType received 1

712476 30232 dp dpdtsdoaupdatec.cc handsetData object not found 1

712491 30233 dp dpdtsdoaupdatec.cc Hdf file could not be opened 1

712592 30234 dp dpdtsdoaupdatec.cc Invalid barred type received 1

712594 30235 dp dpdtsdoaupdatec.cc Invalid error type received 1

712595 30236 dp dpdtsdoaupdatec.cc Hdf version missing 1

712596 30237 dp dpdtsdoaupdatec.cc getFile failed 1

712605 30238 dp dpiwummplib.cc Invalid barred type received during location registration 1

712988 30239 dp dpdtsdoaupdatec.cc Incomplete or wrong HsSwDl files 1

713353 30240 dp dpdlcrbccont.cc No PortableId in first IFrame in the ConnInd Msg 1

713354 30241 dp dpdlcrbccont.cc Invalid PortableId 1

713355 30242 dp dpdlcrbccont.cc rbcGetHandsetIdFromL3Msg(..): Invalid L3Msg parameters 2

715609 30243 dp dpdtsdoac.cc Unknown TgDs signal received by DOA 1

716462 30244 dp dpnwkcomspc.cc Wrong EMC in L3DeVlIeCodeEscToProprietary IE 1

717378 30245 dp dpalldblib.cc Invalid HsId from L3DePutIPUITypeO 2

717382 30246 dp dpalldblib.cc Invalid HsId from L3DePutIPUITypeN 1

717385 30247 dp dpalldblib.cc Invalid HsId from L3DePitIPEI 1

718257 30248 dp dpnwkmmsdl.cc ccMmCipherReq called in invalid MM state 1

718261 30249 dp dpnwkmmsdl.cc MM received a RelInd in invalid state 1

723138 30250 dp dpdlcdlprocs.cc At the end of handover, the EARLY_SEND flag is set but the transmit queue is empty. This should be impossible! Parameters: 1 handsetId 2 DLC state 3 DLC flags 2

724685 30251 dp dpdlcdlprocs.cc Connection Handover with link type != FDL_CHO_REQ 1

724704 30252 dp dpnwkccmomtproc.cc CcMoMt received InvalidPtp message 1

724714 30253 dp dpnwkccmomtproc.cc CcMoMt reveived connect message in wrong state 1

724720 30254 dp dpnwkccmomtproc.cc CcMoMt receives info message in wrong state 1

724721 30255 dp dpnwkccmomtproc.cc CcMoMt receives IwuInfo in wrong state 1

724722 30256 dp dpnwkccmomtproc.cc CcMoMt receives release message in wrong state 1

724723 30257 dp dpnwkccmomtproc.cc CcMoMt received release complete message in wrong state 1

724724 30258 dp dpnwkccmomtproc.cc CcMo: No basic service IE in the setup message 1

724725 30259 dp dpnwkccmomtproc.cc CcMo: Setup in wrong state received 1

724726 30260 dp dpnwkccmomtsdl.cc CcMoMt: Unexpected PTP message received 1

724727 30261 dp dpnwkccmomtsdl.cc ccMoMt: CipherCfm with positive result received in wrong link type 2

724728 30262 dp dpnwkccmomtsdl.cc ccMoMt: CipherCfm with negative result received in wrong link type 1

724729 30263 dp dpnwkccmomtsdl.cc Missing basic service IE in MmsSetup message 1

724731 30264 dp dpnwkccmomtsdl.cc MoMt: Cc02 expired and cc previously initiated the release 1

724732 30265 dp dpnwkccmomtsdl.cc Mms: Release response ignored 1

724734 30266 dp dpnwkccmomtsdl.cc Mms: ReleaseRes received but wrong info in ftnwcc_release_lower_layers 1

724735 30267 dp dpnwkccmomtsdl.cc CcMoMt: RelCfm received in wrong state 1

724738 30268 dp dpnwkccproc.cc Cc: Invalid PTP message ignored 1

724764 30269 dp dpnwkccproc.cc Cc: Unrecognised progress_ind data 1

724775 30270 dp dpnwkccproc.cc Cc: Alerting received in unexpected state 1

724777 30271 dp dpnwkccproc.cc Cc: Connect received in unexpected state 1

724778 30272 dp dpnwkccproc.cc Cc: Info received in unexpected state 1

724780 30273 dp dpnwkccproc.cc Cc: Release received in unexpected state 1

724781 30274 dp dpnwkccproc.cc RelCom received in unexpected state 1

724783 30275 dp dpnwkccproc.cc Cc: Missing basic service IE in setup message 1



724789 30278 dp dpnwkccproc.cc Cc: Setup received in unexpected state 1

724792 30279 dp dpnwkccsdl.cc Cc: Unexpected message type 1

724794 30280 dp dpnwkccsdl.cc Cc: CipherCfm (positive result) received but unexpected link type 1

724796 30281 dp dpnwkccsdl.cc Cc: CipherCfm (negative result) received but unexpected link type 1

724798 30282 dp dpnwkccsdl.cc Cc: Missing basic service IE in DectSetupReq message 1

724799 30283 dp dpnwkccsdl.cc Cc: CC02 expired, unexpectd release reason 1

724800 30284 dp dpnwkccsdl.cc Cc: RelRes received without previous rel indication to the IWU 1

724802 30285 dp dpnwkccsdl.cc Cc: RelRes received with unexpected ftnwcc_release_lower_layers 1

724804 30286 dp dpnwkccsdl.cc Cc: RelCfm received in unexpected state 1

724828 30287 dp dpnwkccmomtproc.cc CcMoMt: Connect received in unexpected state 1

724829 30288 dp dpnwkccmomtproc.cc CcMoMt: Info received in unexpected state 1

724830 30289 dp dpnwkccmomtproc.cc CcMoMt: IwuInfo received in unexpected state 1

724831 30290 dp dpnwkccsdl.cc Cc: Alerting received in unexpected state 1

724832 30291 dp dpnwkccproc.cc Cc: Connect received in unexpected state 1

724833 30292 dp dpnwkccproc.cc Cc: Info received in unexpected state 1

724841 30293 dp dpnwkptp.cc Optional IE missing 1

724853 30294 dp dpnwkptp.cc Mandatory IE content error 3

724854 30295 dp dpnwkptp.cc Mandatory IE missing 1

724855 30296 dp dpnwkptp.cc Irrecoverable message error 1

724860 30297 dp dpnwkptp.cc Invalid message length 1

724861 30298 dp dpnwkccmomtsdl.cc MMsIwuInfoReq received in unexpected state 1

724862 30299 dp dpnwkccmomtsdl.cc CMmsConnectReq received in unexpected state 1

724863 30300 dp dpnwkccmomtsdl.cc DectCMmsConnectRes received in unexpected state 1

724864 30301 dp dpnwkccmomtsdl.cc CcMoMt: Unexpected message received 1



724868 30304 dp dpnwkccsdl.cc DectInfoReq received in unexpected state 1

724869 30305 dp dpnwkccsdl.cc DectIwuInfoReq received in unexpected state 1

724870 30306 dp dpnwkccsdl.cc DectConnectReq received in unexpected state 1

724871 30307 dp dpnwkccsdl.cc DectConnectRes received in unexpected state 1

724872 30308 dp dpnwkccsdl.cc Unexpected Dect message 1

724873 30309 dp dpnwkccsdl.cc Unexpected Dps message 1

724876 30310 dp dpnwkccsdl.cc Unexpected TgTi message 1

724879 30311 dp dpnwklcsdl.cc Unexpected dect message received 1

724880 30312 dp dpnwklcsdl.cc Unexpected TgTi message received 1

724881 30313 dp dpnwklcsdl.cc Unexpected Dps message received 1

724882 30314 dp dpnwklcsdl.cc Unexpected DpMon message received 1

725135 30315 dp dpdlcdlsdl.cc DL04 expired but nothing to retransmit as tx_q is null 1

761289 30316 dp dpiwummplib.cc Missing location context information (while handling TaDeMmIdAssignAcceptCfm) 1

767696 30317 dp dpalldblib.cc LAL could not be written 1

767697 30318 dp dpalldblib.cc DECT system state (passive/active) could not be written. 1

767865 30319 dp dpalldblib.cc Wrong nbr of bits for the requested LaId 1

778391 30320 dp dpdlcrbcsend.cc RBC - Stimulus received in a TgAd2Received message does not fit into the destination message (TgDeDataInd). All bytes of the stimulus which exceed the length of the destination 1

791164 30321 dp dpdlcrbccont.cc rbcHdlConnInd: invalid handsetId in ConnInd message. Message ignored to prevent crash (see br58678). param1: handsetId param2: reject reason param3: rejectCall-flag 2

630082 34001 lr lrxasynchbridge.cc error mapping lrNumAnalEnuC to XaNumAnalEnuC 1

630211 34002 lr xalcrcommon.cc This error is associated with trying to use a ifpointer that doesn't exist in a user record. This is linked with bug 12935 but is generally useful. Will occur ifa a call to nc_if_pointer 1

630212 34003 lr xalcrcommon Indicates that the dialled digit length is less than the exchange access code. 1

630213 34004 lr xalcrcommon Indicates that the dialled digit length is less than the exchange access code, but this is in getSecondaryRoute() 1

630217 34005 lr <empty> 1

630612 34006 lr lrallcommon.cc

When a primary provider fails and the secondary provider is invoked this warning is sent to system admin to warn that the call is more expensive. similar to old warning in xa

domain. 1. Parameter: PrimaryProvider ID 2. Parameter: Used Route of the primary provider that failed (busy) 3. Parameter: Route used by the secondary provider 4

631262 34007 lr lrallcommon.cc Null pointer found connecting sub asfter dtmf dialling. Check the bcsref parameter passed to the fucntion to be sure that it was valid. 1

712462 34008 lr laallcommon.cc The LcrInterDigitTimer expired but the corresponding node doesn't exist any more. Param 1: is the bcsref. 1

725373 34009 lr lralldataaccess.cc Unexpected tepId type in check if LCR enabled. Param1: tepId value Param2: tepId type 1

725496 34010 lr lrallcommon.cc LCR routing for tep other than subscriber or door! Param1: tep value Param2: tep type 1

629868 36001 ma mamondevsettings.cc Functionpointer outString is not defined. 1

630067 36002 ma maxasynchbridge.cc error mapping of mamontestflagenu to xamontestflagenu in xa domain. 1

630070 36003 ma maxasynchbridge.cc Error id for enum mapping of xanumanalenu type. 1

630132 36004 ma madlsynchbridge.cc Mapping MaSktProtFamEnumC to DlSktProtFamEnumC has resulted in unknown instance of enum. Probably the Ma enum has been extended but the mapping function has not. 1

630133 36005 ma madlsynchbridge.cc MApping MaSktTypeEnumC to DlktTypeEnumC has resulted in unknown instance of enum. Probably the Ma enum has been extended but the mapping function has not. 1

630143 36006 ma maxasynchbridge.cc(File) MApping MaSktTypeEnumC to DlktProtEnumC has resulted in unknown instance of enum. Probably the Ma enum has been extended but the mapping function has 1

630505 36007 ma maerrcont.cc No more flash available 1

630529 36008 ma maalsnotify.cc Cannot find MaDestinationIdC::InternPrinter 1

630530 36009 ma maerrcrashfile.cc remote alarm raised after a system crash 1

630594 36010 ma maerrcrashfile.cc Could not close the directory stream. This could end with a crash because of missing detaches. 1

630690 36011 ma mamsttracebuf.cc The ring buffer has rubbish in it, discarding it! 1

630755 36012 ma masigtrcmon.cc MaSigTrcMonitorC::handleSig() has a signal it can't use and can't pass on to the socket. If first parameter = 1 minor is unknown, if 2 command is unknown. 1

630756 36013 ma masigcatchobjc.cc Used variously in file (mostly buffer overrun etc)look fter. 1

631095 36014 ma masigcatchobjc.cc Unknown Major Signal cannot be handled by the signal handler. 1

631096 36015 ma masigcatchobjc.cc Unknown command from user interface (signal tracer monitor) cannot be handled. 1

631097 36016 ma masigcatchobjc.cc Unknown self command cannot be handled by the handler. 1

631098 36017 ma masigformatclasses.cc No output path has been defined to put the data. 1

631166 36018 ma maalsnotify.cc An alarm type was not treaded. 1

631171 36019 ma mamontracer.cc vsprintf() wrote off the end off the buffer. 1

631172 36020 ma masigselectutil.cc

There is a problem with the number of major signals the user has entered into this selection map. Either he forgot to enter the new signal here as well, or he didn't removed it after

he has removed it from the 'MajorEnu' enum. Param1: 0 Param2: The number of major signals in the selection map Param3: The number of signals which should be in the map 1

631182 36021 ma mamonitor.cc Telnet parser missing! 1

631209 36022 ma maalsnotify.cc An alarm type is missing for some reason. 1

631210 36023 ma maalsnotify.cc An alarm destination is missing for some reason! 1

631211 36024 ma <empty> We could not create a required object! 1

631212 36025 ma <empty> We could not create a required alarm table! 1

631213 36026 ma <empty> // The requested alarm table is missing! 1

631214 36027 ma <empty> We could not create an alarm condition object. 1

631215 36028 ma maalsconfig.cc We could not create the alarm spec object! 1

631290 36029 ma maerrcrashfile.cc A recursive crash has occured while trying to write the crashlog to the filesystem. Parameter 1 contains the crashlocation of the recursive crash Parameter 1 and 3 contain the first 1

631302 36030 ma masigcatchobjc.cc Unexpected signal received. 1

631303 36031 ma masigcatchobjc.cc Creating a socket failed for some reason. 1

632912 36032 ma masigtrcmon.cc There is already a running timer. If another timer is started before the first one has expired, something went wrong. 1

639523 36033 ma maerrcont.cc Unexpected signal with major MajorTgEr received. Params: 1: Major, 2: Minor, 3: 0. 2

639524 36034 ma maerrcont.cc Unexpected signal received. 1

640161 36035 ma maalsspooler.cc The alarm message is too long! 1

641596 36036 ma masynproc.cc Timeout waiting for a reply from maSynProc. 2

641598 36037 ma mamonitor.cc The time synchronisation (offset calculating) failed. 1

647670 36038 ma maalsalarmdestination.cc An alarm stream destination can not handle multiple connections at the same time. 1

647801 36039 ma maalsalarmdestination.cc Unexpected destination type. 1

648646 36040 ma maalsspooler.cc An old hanging data buffer gets deleted. 1

648647 36041 ma maalsspooler.cc The allocated buffer is too short! 1

648933 36042 ma maalsspooler.cc Illegal alarm spooler state. 1

648934 36043 ma maalsspooler.cc Illegal alarm spooler event. 1

648935 36044 ma maalsspooler.cc Unexpected signal received. 1

648936 36045 ma maalsspooler.cc Unexpected alarm spooler event 1

648937 36046 ma maalsspooler.cc Illegal alarm spooler destination. 1

649573 36047 ma mamonitor.cc Incorrect password type 1

661459 36048 ma maerr.cc Alarm that the IBus-Tier has been stopped because a certain ErrorId turned up. 1

664152 36049 ma maalsspoler.cc The SNMP Trap was not built and we received a NULL pointer instead. The alarm is not sent to the SNMP destination. The spooler will try to re-send the TRAP later. 1

664332 36050 ma maacmaccount.cc The account's profile does not exist or is invalid 1

664333 36051 ma maacmaccount.cc Max. number of subscriber accounts exceeded 1

664453 36052 ma maacmlog.cc Log not found in "UpdateLog" method 1

664496 36053 ma maacminterface.cc ACM expected signal not received before timeout 1

664726 36054 ma maacmmanager.cc DAtabase layer error in 'init' transaction 1

664727 36055 ma masumswupgrmgr.cc SlotId hasn't match an instance in our aipModule map. 1

664732 36056 ma maacmmanager.cc Database error in transaction 'login' 1

664733 36057 ma maacmmanager.cc Database error in transaction 'logout' 1

664734 36058 ma maacmmanager.cc Database error in transaction 'logoutAims' 1

664735 36059 ma maacmmanager.cc Database error in transaction 'getAccountIdFromName' 1

664736 36060 ma maacmaccount.cc Database error in transaction 'MaAcmSubscriberAccount::create' 1

664758 36061 ma masumswupgrademgr.cc We received a slotId which has not relation to one of our virtual AIP instances. Therefore we have create a new instance with the received slotId. 1

664825 36062 ma masumswupgrademgr.cc Could not interpret signal in MaSumUpgradeProc!! 1

664834 36063 ma maacmlog.cc Database error in transaction 'writeLog' 1

664835 36064 ma maacmlog.cc Database error in transaction 'updateLog' 1

664843 36065 ma masumswupgrademgr.cc During the retrieval of the database an AIP with an unknown software generation was detected. (Param1 = slotId, Param2 = nodeId) 1

664975 36066 ma masumupgrdevice.cc The transfer from an AIP 6350 to an AIP 6500 failed. 1

665011 36067 ma masumupgrevent.cc The AIP hasn't restarted at all!! Or the "in service" signal which is sent from the AIP hasn't been received by the L2 socket on the PBX!!! 1

665012 36068 ma masumupgrdevice.cc The Sw upload of the AIP received a timeout!! (SlotId and NodeId -> param1 + param2) 1

665013 36069 ma masumupgrdevice.cc AIP says that it is in service but we have detected an error during the upload of the software!! 1

665174 36070 ma scaimsuseracc.cc Database error in transaction 'saveRowData' 1

665667 36071 ma masumswupgrademgr.cc Received a NULL pointer from the IP-Phone queue. This should not happen!!! Param 1 shows the current size of the queue. 1

666508 36072 ma maacmaccount.cc Subscriber account creation failed. Params: accountId, subsId, trn->willCommit 1

666830 36073 ma maacmmanager.cc Database error in update of 'LastTimeProgrammed' attribute of MDT153 1

667327 36074 ma maibtdump.cc problem in date_time format detection 1

669436 36075 ma maibtreport.cc String is too long. It has been cut at max length. 1

670117 36076 ma masumcont.cc The number of the satellites which are allowed to crash before a rollback is executed, is set to Undef - this is wrong. Check in the UploadManager in AIMS... 1

672190 36077 ma masumcont.cc The removal of the file (PBX appl., AIP appl. or IP_Phone appl.) failed. Either the file does not exist or the file handle is still in use! 1

672811 36078 ma maibtdump.cc Open temporary ibus file for writing failed. 1

689802 36079 ma masumupgrdevice.cc The software upgrade of the IP terminal was not successful. Param1 is the subscriber number, param2 is the cause why the upload has failed. 1

689803 36080 ma masumupgrdevice.cc The software upgrade of the IP terminal which previously failed, has been successful now. Param1 is the subscriber number which indicates the IP terminal 1

690697 36081 ma masumupgrdevice.cc Looking for the IP-Phone file which is necessary for the upgrade of the phone, but the file is not in the FileSystem!!! 1

691383 36082 ma maacminterf.cc ACM access without valid Datalinks source address 1

691384 36083 ma maacmlog.cc Portreference undefined for ACM access 1

692877 36084 ma maalsspooler.cc An alarm type is not associated with the corresponding alarm condition! This should never happen and must be investigated when it occurs. 1

692908 36085 ma maalsspooler.cc A restart of the system is required. The basic initialisation of the system alarm is damaged! The PBX used to crash at this place. 1

692916 36086 ma maalsconfig.cc Data store transaction failed. The first/warm start of the Ma system alarm is incomplete! 1

692922 36087 ma maalsconfig.cc Data store transaction failed. 1

692923 36088 ma maalsconfig.cc MaAlarmSpec object is missing! 1

692924 36089 ma maalsconfig.cc MaAlarmDestination object is missing! 1

692925 36090 ma maalsspooler.cc Data store transaction failed. 1

692926 36091 ma maalsspooler.cc No valid alarm object id available. 1

692927 36092 ma maalsspooler.cc The requested alarm table is not available anymore! 1

692928 36093 ma maalsspooler.cc A critical system alarm object is missing. 1

694857 36094 ma maacmauthinfo.cc MaAcmAuthInfoStrC::make() does not know the specified service. Returning a NULL pointer. 1

698428 36095 ma maerrcont.cc Unexpected signal with major MajorTbx received. Params: 1: Major, 2: Minor, 3: 0. 1

701209 36096 ma masigcatchproc.cc FileManagerEvent received: Param3 = "1" -> DirSizeLimitReached Param3 = "2" -> DirSizeLimitUncritical Param3 = "3" -> not handled 2

701729 36097 ma masumswupgrademgr.cc Insertion in mySwDlMap was fine, but the object has not been found 1

701730 36098 ma masumswupgrademgr.cc Insertion in mySwDlMap failed as element already exists 1

701731 36099 ma masumupgrdevice.cc Wrong msgLen in DppSigTStatusResp 1

701732 36100 ma masumswupgrademgr.cc No entry in mySwDlMap for received SwDlCfm msg 1

701733 36101 ma masumupgrdevice.cc SwCheck failed (myRespFailCtr > MaxDlRespNotOk) 2

701734 36102 ma masumupgrdevice.cc Erase failed (myEraseFailCtr > MaxDlErFail) 1

701735 36103 ma masumupgrdevice.cc Write failed (myWriteFailCtr > MaxDlWrFail) 1

701736 36104 ma masumupgrdevice.cc SwDlCfmMsg received in wrong state 1

701737 36105 ma masumupgrdevice.cc Status timer expired 1

701738 36106 ma masumupgrdevice.cc No GetSwVersCmd for requested SwType 1

701739 36107 ma masumupgrdevice.cc No GetSwVersCmd for next SwType 1

701740 36108 ma masumupgrdevice.cc Unknown Stimuli content received during version check 2

701741 36109 ma masumupgrdevice.cc Unknown Stimuli received during version check 1

701746 36110 ma masumupgrdevice.cc Wrong content in DppSigTStatusChange msg 1

701747 36111 ma masumupgrdevice.cc Unexpected stimuli 1

701749 36112 ma masumupgrdevice.cc Wrong stimuli content 1

701750 36113 ma masumupgrdevice.cc Unexpected stimuli 1

701751 36114 ma masumupgrdevice.cc CheckSwDlCode failed: Invalid myCodeP 2

701752 36115 ma masumupgrdevice.cc CheckSwDlCode failed: Invalid checkSum 1

701753 36116 ma masumupgrdevice.cc CheckSwDlCode failed: Invalid address 1

701754 36117 ma masumupgrdevice.cc Invalid swType 1

701755 36118 ma masumupgrdevice.cc Invalid myCodeP 1

701756 36119 ma masumupgrdevice.cc Unknown TmType 1

713497 36120 ma maibtreport.cc decodeVPNsf() wrote off the end of its buffer. 1

715136 36121 ma masumcont.cc Tried to rename a file in the FS but this failed. The files to rename are for instance the IP terminal SW, the AIP SW etc. 1

715326 36122 ma masumcont.cc File copy has found a problem. The read bytes from the source file differ from the bytes written to the destination file. 1

716532 36123 ma masumcont.cc The rename of a file in the root directory has encountered a problem. The rename did not take place! 1

719108 36124 ma masumwebuploadhandlerc.cc copyfile of firmware package uploaded by webconfig failed 1

726439 36125 ma maibtreport.cc open file for writing "/logs/ibus/ibtStartUp.txt" failed param 1: errno 1

726538 36126 ma maerrcrashfile.cc could not create directory to store crashlog files p1: errno p2: /home/crash could not be created p3: 0 1

727621 36127 ma maerrerrorlogfile.cc could not create directory to store errorlog files p1: errno p2: 1:/home/logs could not be created 2:/home/logs/error could not be created p3: 0 1

727626 36128 ma maibtdump.cc could not create directory to store ibus files p1: errno p2: 1:/home/logs could not be created 2:/home/logs/ibus could not be created p3: 0 1

727712 36129 ma masigformatclasses.cc could not create directory to store the ma sig files p1: errno p2: 1:/home/logs could not be created 2:/home/logs/ma could not be created p3: 0 1

727713 36130 ma masumswupgrademgr.cc could not create directory to store the masum files p1: errno p2: 1:/home/logs could not be created 2:/home/logs/ma could not be created p3: 0 1

731153 36131 ma maalsspooler.cc The alarm spooler has not handled the event due to unknown destination. 1

731154 36132 ma maalsspoolerstate.cc Unknown event. 1

733357 36133 ma masumcont.cc The new attributes 'DoADescription' or 'A600dHSDescription' or 'A600dHSFirmwareContainer' from the terminal software manager are not empty when the directory 1

733845 36134 ma maalsactivealarm.cc No response to remote client active alarm request. Param1: nodeId of node which did not respond 1

735309 36135 ma maacmmanager.cc Failed to initialize, remove CPU2 related Account, Profile or Failed to create Bucs Account If Missing or Failed to create Aastra SIP Account If Missing 3

738371 36136 ma masumswdlaatmdatadlcode.cc Warning: Midi file requested in midi.txt not found. Parameter 0: 0 Parameter 1: getSwDlId() Parameter 2: mySwType 1

738372 36137 ma masumswdlaatmdatadlcode.cc Error: Midi file memory space overflow. Parameter 0: 0 Parameter 1: getSwDlId() Parameter 2: mySwType 1

741697 36138 ma maibtreport.cc Crashlog generation error: could not open /home/crash/ibus.tmp for writing. Parameter 1 = errno, Parameter 2 = file descriptor 1

741698 36139 ma maibtreport.cc Crashlog generation error: could not open /home/crash/ibus.tmp for reading. Parameter 1 = errno, Parameter 2 = file descriptor 1

741699 36140 ma maibtreport.cc Crashlog generation error: could not open /gzip/home/crash/crashlog1.htm.gz for appending. Parameter 1 = errno, Parameter 2 = file descriptor 1

741700 36141 ma maibtreport.cc Crashlog generation error: could not remove temporary file /home/crash/ibus.tmp. Parameter 1 = errno, Parameter 2 = file descriptor 1

744597 36142 ma maalsspooler.cc Local alarm destination available again. 1

744598 36143 ma maalsspooler.cc Remote alarm destination available again. 1

749235 36144 ma masumcont.cc Could not open file /home/data/terminal-firmware.txt for reading 1

749564 36145 ma maibtreport.cc couldn't create /home/crash directory 1

749565 36146 ma masumupgrdevice.cc

Error reading Aamadeus PRISA firmware file Parameter 1: Ad2ErrorType: 0=Ad2ErrNoError, 1=Ad2ErrFileNotFound, 2=Ad2ErrFileNotOpened, 3=Ad2ErrFileNotMapped,

4=Ad2ErrFileTooLarge, 5=Ad2ErrMissingVersionRec, 6=Ad2ErrInvalidVersion, 7=Ad2ErrInvalidEndaddress Parameter 2: mySwDlP->getSwDlId() Parameter 3:

SwTypeAd2Fw SwTypeUndef, // 0x00 SwTypeAd2Appl = 0x21, SwTypeAd2Boot = 0x24, SwTypeAd2Fw = 0x25, SwTypeSbcFw = 0x26, SwTypeSbc4Appl =

0x61, SwTypeSbc8Appl = 0x64, SwTypeAd2Melodies = 0x80 3

749566 36147 ma masumupgrdevice.cc

Error reading Ad2 Application file Parameter 1: Ad2ErrorType: 0=Ad2ErrNoError, 1=Ad2ErrFileNotFound, 2=Ad2ErrFileNotOpened, 3=Ad2ErrFileNotMapped,

4=Ad2ErrFileTooLarge, 5=Ad2ErrMissingVersionRec, 6=Ad2ErrInvalidVersion, 7=Ad2ErrInvalidEndaddress Parameter 2: mySwDlP->getSwDlId() Parameter 3:

SwTypeAd2Appl SwTypeUndef, // 0x00 SwTypeAd2Appl = 0x21, SwTypeAd2Boot = 0x24, SwTypeAd2Fw = 0x25, SwTypeSbcFw = 0x26, SwTypeSbc4Appl =

0x61, SwTypeSbc8Appl = 0x64, SwTypeAd2Melodies = 0x80 3

750882 36148 ma mamonmain.cc Couldn't create directory Param1 = errno after the mkdir 1

758915 36149 ma masumcont.cc The rename of the file (Start.asp, PleaseWait.asp and aastra_blank_logo.png) failed. The file does not exist! Param1 = errFs Param2 = 0/1/2 respective, Start.asp / 4

759283 36150 ma maerrcont.cc Too many errors with the same ID. P1: errorId 1

759942 36151 ma masumcont.cc Invalid upload state. P1=value of "ScUploadStateC" 1

760195 36152 ma mamonmain.cc Initialisation of logging destination directory failed. The link handler could not send the signal to the file manager, e.g. load module fmgr not available/loaded. The existence of 1

760196 36153 ma masigcatchproc.cc

File manager subscription FmSubscribeDirSizeLimitReached for "/home/logs" failed. The link handler could not send the signal to the file manager, e.g. load module fmgr not

available/loaded. The existence of the file manager (fmgr) can be veryfied using the OSE shell cmd "alminfo". 1

760197 36154 ma masigcatchproc.cc

File manager subscription FmSubscribeDirSizeLimitUncritical for "/home/logs" failed. The link handler could not send the signal to the file manager, e.g. load module fmgr not

available/loaded. The existence of the file manager (fmgr) can be veryfied using the OSE shell cmd "alminfo". 1

762223 36155 ma maacmasynchfacadec.cc Call to OsLnhDeviceSynchFacadeC::osLnhSend() failed. 1

762225 36156 ma maacmasynchfacadec.cc receiveSigTmo timed out and therefore we have no response signal 1

775130 36157 ma masumcont.cc Could not create the directory '/web' and this has as result that the WA/SSP/HM language file strings could not be retrieved. This happens only when from an old web structure to 2

780581 36158 ma maals... Connection to SRM destination established. 1

780582 36159 ma maals... Connection to SRM destination failed. Param1: Reason (1-Attempt to connect failed, 2-Authentication failed, 3-File upload refused) 1

782064 36160 ma maswasdbaccessc.cc Checksum for SWAS DB instance doesn't match. Did someone modify the data not using the function provided (dbbrowser?) 2

782065 36161 ma maswasdbaccessc.cc The database instance isn't bound. 1

782334 36162 ma maswasasynchfacadec.cc A response to request sent via the MaSwasAsynchFacadeC hasn't been received within the alloted time. 1

782511 36163 ma maswasmessagec.cc Problem in either coding, encoding or verifying a swas message. 1

782937 36164 ma maacmaccount.cc The password for the Linux accounts "admin" or "root" could not be set. 1

784886 36165 ma masumcont.cc Could not create the directory '/home/mivo400/web/admin/tmp' param 1 = errno 1

785803 36166 ma maacmmanager.cc lastProgrammed date is out of range 1

786514 36167 ma maerrcont.cc MaErrProcC::prelude() was not able to Register the thread cleanup handler. This leads to unnecessary Errors on regular application Exit. 1

788380 36168 ma maswasclonedetectionc.cc Alarm (negative) If the SLS Cloud detects a possible clone, then this alarm is raised. 1

788381 36169 ma maswasclonedetectionc.cc Alarm (positive) If the SLS Cloud decides this PBX is no more considered as clone. 1

788382 36170 ma maswasclonedetectionc.cc Alarm (negative) If the PBX can't establish a connection to the SLS cloud to do the clone check, then this alarm is raised 1

788383 36171 ma maswasclonedetectionc.cc Alarm (positive) If the PBX can successfully connect the SLS cloud again and gets a sensible answer (positive or negative, but not a general error or an unknown PBX error) 1

791148 36172 ma malogmanager.cc Couldn't create log file related directory. 1

630100 38001 ia iasrvvmpipe.cc Failed to bind VoiceMail Pipe Server 1

630101 38002 ia VM Pipe Server received a "Send 1

630102 38003 ia iasrvvmpipe.cc The VM Pipe Server received a "Send Allowed" message when it had nothing to send. 1

630103 38004 ia iasrvvmpipe.cc Voice Mail pipe server received an unexpected message 1

630104 38005 ia iasrvvmpipe.cc Recieved a "Send Allowed" message for an unknown socket 1

630105 38006 ia iasrvvmpipe.cc Recieved a "Data Present" message for an unknown socket. 1

630656 38007 ia iaftpserv.cc The remote IP address has an invalid value. 1st param - ip addr, 2nd param - application port 1

630657 38008 ia iaftpserv.cc A data connection has been already established or we are in passive mode with this FTP session. 1

630658 38009 ia iaftpserv.cc The establishment of a FTP data connection was not successful due to an existing data connect timer was found. 1

630659 38010 ia iaftpserv.cc FTP tried to open a data connection which is already in use. Note that the FTP mode was set to passive. 1

630660 38011 ia iaftpserv.cc A data connect timer was not canceled correctly. FTP mode was set to passive. 1

630661 38012 ia iaftpserv.cc The establishment of a FTP Data connection failed due to a bind error. 1

630662 38013 ia iaftpserv.cc During an establishment of a fTP data connection, DL sent us an invalid socket Id. 1

630663 38014 ia iaftpserv.cc While closing a data connection (FTP) an uncancelled data connect timer was detected. 1

630664 38015 ia iaftpserv.cc While closing a data connection (FTP) we tried to close a data socket that did not exist. 1

630665 38016 ia iaftpserv.cc The shutdown of a FTP Ctrl connection is not possible due to an invalid socket Id. 1

630666 38017 ia iaftpserv.cc Somebody tried to open a second FTP data connection, this is not possible. 1

630667 38018 ia iaftpserv.cc handleSktNewSocket failed completely! 1

630668 38019 ia iaftpserv.cc Data arrived on an unconnected FTP data socket. 1

630669 38020 ia iaftpserv.cc During a FTP connection, data arrived on an unrecognised socket id. 1

630670 38021 ia iaftpserv.cc The FTP Ctrl connection seems to be not connected. 1

630671 38022 ia iaftpserv.cc The FTP data connection seems to be not connected. 1

630672 38023 ia iaftpserv.cc The FTP connection seems to be invalid, we cannot send data on it. 1

630673 38024 ia iaftpserv.cc in handleSktDisconnected(), the socket id was neither for the Data NOR for the Ctrl connection of the FTP session. 1

630675 38025 ia iaftpserv.cc The previous data connection (FTP) did not close correctly. Maybe a DL prob. 1

630676 38026 ia iaftpser.cc Data has been left over in the outgoing buffer. Seems to be a problem with the sock. 1

630677 38027 ia iaftpserv.cc Problem with allocating memory for the transmit buffer. (FTP) 1

630691 38028 ia iaemsemailprocc.cc

The email service (ems) was not successfull. That means for example that an email couldn't be sent via SMTP, or the max number of dynamic created was reached. Note, only the

automatic (PBX) sent mails lead to such warnings. If a user is involved (terminal) it'll be informed immediately. If you need more informations, please read the "e-mail on Ascotel"

documentation of Christoph Burger's thesis ;-) 1

630922 38029 ia iaftpproc.cc open / listen on the DL asyncServerSocket failed during the startup of the ftp process. P1 is the error which was sent from DL. 1

630923 38030 ia iaftpproc.cc open() on a DL socket reported an error. P1 is the error indication sent from DL. 1

630924 38031 ia iaftpreply.cc The send() method (DL) reported an error while sending the FTP reply to the client. P1 is the DL error. 1

630925 38032 ia iaftpserverdtp.cc In sendBuffer() an error was reported. The send of the buffer to the FTP client was not possible or went wrong! 1

630927 38033 ia iaftpserverdtp.cc Closing the data socket of the FTP session went wrong. P1 is the error which was reported by DL. 1

630928 38034 ia iaftpserverdtpsock.cc Something went wrong with fseek(), either the filePointer or the filePosition is grap..So we close the data session and delete the file from the FS 2

630929 38035 ia iaftpserverdtpsock.cc Data connection of the FTP was not active (neither a receive nor a transmit), something went totally wrong. 1

630930 38036 ia iaftpserverdtpsock.cc while sending data to the client (RETR) an error occured in the send routine. P1 is the error received from DL. 1

630931 38037 ia iaftpserverdtpsock.cc The connect() in the sendBuffer method replied with a DL error. P1 is the DL error. 1

630932 38038 ia iaftpserverdtpsock.cc The value of the class variable myType in the DTP is corrupt. This should be either set to ASCII or IMAGE. P1 contains the value which was set in the var. 1

630933 38039 ia iaftpserverpi.cc setState() went wrong. That should not happen. Something is corrupt. 1

630934 38040 ia iaftpserverpi.cc The object FtpAccessLevel is not in the database. DS maybe corrupt!! 1

630935 38041 ia isftpserverpi.cc The DTP still exists, which means we have a data connection to one of the clients. Somebody forgot to kill this DTP session. P1 is the IP address, P2 the port to the connected client. 1

630936 38042 ia iaftpserverpi.cc The socket family is not an internet one. Strange, we asked for one!!!! Datalinks error. 1

630937 38043 ia iaftpserverpi.cc It is allowed to send files or buffers to the client, nothing else!! In this case, the medium was corrupt!!! 1

630938 38044 ia iaftpserverpi.cc The direction var in the PI is corrupt. 1

630939 38045 ia iaftpserverpi.cc The DTP has been already terminated!! This was not expected here! 1

630940 38046 ia iaftpserverpisock.cc The PI already exists! 1

630941 38047 ia iaftpserverpisock.cc The PI died while we were in a FTP session. 1

630942 38048 ia iaftpserverpisock.cc The listen of a DL AsyncServerSock failed. P1 is the error received from DL. 1

630943 38049 ia iaftpserverpisock.cc The open() on a DL AsyncServerSock failed. P1 is the error reported by DL. 1

630954 38050 ia iaftpserverpisock.cc The PI socket hasn't closed correctly. Seems to be a problem in DataLinks. Maybe it's reboot time!!!!! 1

630977 38051 ia iasrvtelnet.cc Failed to create unique key from address. 1

631183 38052 ia iasrvtelnet.cc fsEfsSprintf() wrote past the end of the buffer. 1

634662 38053 ia iaallinit.cc The webserver hasn't started correctly. 1

648105 38054 ia iasmpmibhdl.cc In setSysMgntRelatedStatusInMib() parameter1 and/or parameter 2 have not an expected value. 2

648107 38055 ia iasmpmibhdl.cc The parameter1 of the method setExternalApplRelatedStatusInMib() contained an unexpected value. (errLog: Param1 is the value) 1

648108 38056 ia iasmpmibhdl.cc The the value of the parameter alarmType in setExternalApplRelatedStatusInMib() was not expected. (Param1 in the Errorlog contains the unexpected value) 1

648110 38057 ia iasmpmibhdl.cc The Param1 in setSubscriberRelatedStatusInMib() contained an unexpected value. (The value is shown in the errLog - first parameter) 1

648111 38058 ia iasmpmibhdl.cc The parameter "alarmType" in setSubscriberRelatedStatusInMib() contained an unexpected value. (see errLog - param1) 1

648113 38059 ia iasmpmibhdl.cc The parameter "alarmType" in the method setRouteRelatedStatusInMib() contained an unexpected value. (see errLog - param1) 1

648114 38060 ia iasmpmibhdl.cc The parameter "alarmType" in the method setTrunkRelatedStatusInMib() contained an unexpected value. (see errLog - param1) 1

648116 38061 ia iasmpmibhdl.cc The parameter "alarmType" in method setHardwareComponentStatusInMib() contained an unexpected value. (see errLog - param1) 1

648117 38062 ia iasmpmibhdl.cc In method updateDataDeviceV24MibObjects(), V.24 object was not found. 1

648118 38063 ia iasmpmibhdl.cc In method updateEAMailServerMibObjects(), voiceMail object was not found. 1

648119 38064 ia iasmpmibhdl.cc In method updateEAAcdMibObjects(), acdServer object was not found. 1

648121 38065 ia iasmpmibhdl.cc In method updateEAPrinterMibObjects(): The printerId has not matched an existing one. 1

648122 38066 ia iasmpmibhdl.cc In method updateSubscriberMibObjects: The subscriber object has no relation to an directory entry. (see errLog - param1 = subsId) 1

648123 38067 ia iasmpmibhdl.cc In method updateRouteMibObjects(): The route object has no relation to an directory entry. (errLog - param1 = routeId) 1

648124 38068 ia iasmpmibhdl.cc In method updateLcrMibObjects(): The leastCostRouting object was not found. 1

648126 38069 ia iasmpmibhdl.cc In method findV24WhichBelongsToVoiceMail(): The device which is connected to the voiceMail is not an expected V.24. 1

648130 38070 ia iasmpagent.cc The pointer of the response message which was returned from the protocol handler is NULL. 1

648131 38071 ia iasmpagent.cc The received ASN.1 PDU didn't contain an SEQ Tag or it was not a SNMP_V1 PDU. 1

648132 38072 ia iasmpagent.cc In handleData(): Either the data pointer was NULL or the length of the data of the received SNMP request was zero. 1

648133 38073 ia iasmpagent.cc The send method in Dl was not succesful. 1

648134 38074 ia iasmpagent.cc The MIB handler was not able to convert/update the received alarm into an appr. MIB object. 1

648135 38075 ia iasmpagent.cc The dateTime class returned an error while compiling the time in milliSeconds..... 1

648136 38076 ia iasmpagent.cc The agent received a handleIncomingConnection on an UDP port. This is an error. 1

648140 38077 ia iasmpprothdl.cc The SNMP_V1 protocol handler received an SNMP message which cannot be handled by an SNMP agent (trap/getResponse). 1

648141 38078 ia iasmpprothdl.cc The handleGet() method of the SNMP_V1 protocol handler received a pointer to a GET_PDU which was NULL. 1

648142 38079 ia iasmppdu.cc In decode() an SNMP PDU was received which contained a varBindElement with an objectSyntax which is not supported. 1

648143 38080 ia iasmppdu.cc In IaSmpVarBindInt/StrC::encode(): The varBindElement to encode contains an object type which is not supported. 2

648144 38081 ia iasmppdu.cc During encoding of a varbindElement it was detected that the objectSyntax is neither of type simple nor application. 1

648145 38082 ia iasmpresppdu.cc In the constructor of an SNMP Response PDU the varbindElement couldn't be encoded. 1

648155 38083 ia iasmpagent.cc The UDP socket in the SNMP agent has a problem to start at all!!! 1

648280 38084 ia iasmpproc.cc The SNMP agent pointer was NULL. This should not happen! 1

648372 38085 ia iaallinit.cc The transaction for setting the attributes of the network mgnt agent failed. This should not happen. Looks like the data storage has a problem. 1

648880 38086 ia iasmppdu.cc The SNMP request PDU contains a varbind list which has more than one entry. 1

649808 38087 ia iasmpmibhdl.cc The length of the number (subscriber/route etc.) is ZERO. This is not good. Looks like the object, e.g. subscriber was not initialised correctly. 1

650179 38088 ia iaftpserverdtpsock.cc The fwrite() function of the filesystem has reported an error. Maybe there is no memory left over in the FS. The data connection is closed. 1

651294 38089 ia iasrvtelnet.cc There is still a telnet parser hanging around from a previous connection. 1

653048 38090 ia IaSipUserAgentC Unexpected SIP message. 1

653255 38091 ia iasipuseragent.cc Cannot send BYE message because we did not receive the ACK yet!! 1

653256 38092 ia iasipuseragent.cc Cannot send a BYE because we have not received the OK yet!! 1

653323 38093 ia iasipuasession.cc We seem to not be either the UAC or the UAS of the initial invite? 1

653324 38094 ia iasipuseragent.cc SIP to SIP address mixup. 1

656264 38095 ia iasrvdnsproc.cc We have a duplicated hostname! 1

656265 38096 ia ialibdns.cc The identification between the DNS query and the DNS answer failed. The answer from the DNS server was not expected. 1

656570 38097 ia iasipregistrar.cc Sip Registrar received a non register message 1

656571 38098 ia iasipregistrar.cc Invalid Url received in 'From' tag. This is probably a dns name (not supported) 1

656573 38099 ia iasipregistrar User not found in vector cache. (Param1: subsNum, Param2: userId) 1

656627 38100 ia iasipuainterface.cc Remote proxy call timed out 1

656821 38101 ia iasipregistrar.cc The DS transaction failed. Non of the values are stored in the database. 1

656915 38102 ia iasipregistrar.cc User has sent an invite from a different location (possible session stealing) 1

657165 38103 ia iasipregistrar.cc Notification of SIP user creation with empty subscriber number 1

657497 38104 ia iasipuabasesession.cc A session has locked up and will now be removed forcefully in order to recover the memory 2

657558 38105 ia uasipuseragent.cc The SIP User ID is not configured for the external registrar. We cannot register. 1

657774 38106 ia iasipuseragent.cc No such call? 1

657820 38107 ia iasipuasession.cc Unexpected "200 OK" response 1

657824 38108 ia iasipuseragent.cc Call already exists 1

657883 38109 ia iasipuasession.cc The URL in the 'To:' or 'From:' field was not a SIP one! 1

657909 38110 ia iasipuasession.cc sendSipMessage() called with remote address 0.0.0.0 ? 1

657994 38111 ia iasipuasession.cc NULL pointer passed to sendSipMessage() 1

658034 38112 ia iasipuasession.cc We have no codec list. 1

658038 38113 ia iasipuasession.cc Received an error in the IDLE state? 1

658039 38114 ia iasipuasession.cc Received "200 OK" in unexpected state 1

658096 38115 ia iasipuseragent.cc Session not found 1

658247 38116 ia iasmpmibhdl.cc Remove of the branches in the MIB tree failed. 1

658318 38117 ia iasmpmibhdl.cc The MIB tree was not deleted before recreation of the one. This is only possible if we receive an indication from SM! 1

658319 38118 ia iasmpproc.cc MIB was rebuild due to an update of the UDP port of the SNMP agent. 1

659173 38119 ia iasipuatransciever.cc Destination address invalid. 1

659836 38120 ia iasipuasession.cc Internal server error 1

660021 38121 ia iasipuasession.cc We received a 407 challenge but have not sent a request? 1

660433 38122 ia iasipuseragent.cc registrar/proxy info missing 1

660434 38123 ia iasipuseragent.cc External account not found. 1

660435 38124 ia iasipuseragent.cc Inserted external account over the top of an exisiting one 1

660484 38125 ia iasipuseragent.cc Tried to add a NULL pointer to the external account map? 1

660692 38126 ia iasiptransceiver.cc Incoming response did not match a current transaction! 1

660737 38127 ia iasipalg.cc ALG: SIP entity not found! 1

660759 38128 ia iasipuasession.cc We are trying to construct a NOTIFY but have not sent or received an INVITE yet, so it is not possible to compute the call leg. 1

661284 38129 ia iasiptransceiver.cc The transaction is neither a client nor a server? 1

661537 38130 ia iasipuseragent.cc handleCreateExtAccount() called on an account that already exists! 1

661947 38131 ia iasipuseragent.cc NULL pointer 1

662093 38132 ia iasipuseragent.cc Wrote and external account over an existing one. 1

662094 38133 ia iasipuseragent.cc Trying to add a NULL pointer to the SIP provider map! 1

662095 38134 ia iasipuseragent.cc createSipProvider, provider already exists! 1

662096 38135 ia iasipuseragent.cc Provider instance not found! 1

662959 38136 ia iasipuseragent.cc NOT Sending REGISTER to because the address is invalid 1

662960 38137 ia iasipuseragent.cc NOT Sending REGISTER because the registrar has not been configured 1

662961 38138 ia iasipuseragent.cc NOT Sending REGISTER because the credentials are not complete 1

663275 38139 ia iasipuseragent.cc Received a response to a REGISTER from us, but failed to find the account for that! 2

663281 38140 ia iasiptransceiver.cc Failed to find matching server transaction for incoming request! 1

663317 38141 ia iasipuasession.cc Invalid attempt to send an OPTIONS message 1

664049 38142 ia iasipuseragent.cc A SIP transaction failed 1

664389 38143 ia iasipuasession.cc Codec framelength not supported. 1

665489 38144 ia iasipvovidautil.cc Found and corrected a corrupt Vocal::Data pointer. 1

665600 38145 ia iasipuseragent.cc Failed to find an account to make an outgoing external SIP call. It is likely that SIP is not configured correctly if it failed here. Check that there is either a SIP account for this 1

665835 38146 ia iasipuseragent.cc Unknown SIP from field type. 1

666100 38147 ia iasipuseragent.cc

No session found for incoming SIP message The UserAgent received a call related SIP message for which it could not find the call. SIP calls are matched using the DialogId which

is made up from the "From Tag", the "To Tag" and the "Call-Id" as specified in RFC 3261. If this does not match an existing "call" the User Agent replies with "481 - ....." 2

666598 38148 ia iasipuasession.cc SIP request failed becase either the user credentials are wrong or payment is required. Either way the provider blocked the call because the user does not currently have access. 1

666854 38149 ia iasipuseragent.cc Provider pointer is NULL 1

666902 38150 ia iasipuasession.cc Unhandled status code in handleSipStatus() 1

666913 38151 ia iasipuseragent.cc Recieved challenge, but we have not sent a REGISTER? 1

666996 38152 ia iasipuseragent.cc Primary address not known for provider 1

666997 38153 ia iasipuseragent.cc No account details for provider 1

667296 38154 ia iatlnparser.cc Unknown TELNET command received 1

667647 38155 ia iasipuasession.cc Stuck session timer fired in a non-transient state 1

667661 38156 ia iasiptransceiver.cc It's time to retransmit a message, but the message seems to have disapeared. 1

667671 38157 ia iasipuasession.cc myOutgoingInvite is not set 1

667684 38158 ia iasipuasession.cc Failed to send ACK because status message is missing 1

667766 38159 ia iasipuseragent.cc Received a challenge to our REGISTER, but the credentials are not configured 1

667771 38160 ia iasiptransceiver.cc The transaction got stuck and the protection timer fired. 1

667835 38161 ia ialibdns.cc The performed DNS query failed for some reason. 1

667879 38162 ia ialibdnsresolver.cc hostname too long 1

667982 38163 ia ialibdns.cc parseRecordData() failed 1

668428 38164 ia iasipuasession.cc sendSipStatus() with NULL command pointer. 1

668963 38165 ia ialibdnsproc.cc Request timed out 1

668972 38166 ia ialibdnsproc.cc NULL request pointer. 1

668976 38167 ia ialibdnsproc.cc Overwriting an existing request 1

668977 38168 ia ialibdnsproc.cc NULL signal pointer 1

668978 38169 ia ialibdnsproc.cc Unrecognised minor type 1

669028 38170 ia iadnsproc.cc The DNS query failed because neither the primary nor the secondary DNS server replied. Please check the DNS server configuration in AIMS/AMS/webAdmin. param 1 = ip- 5

670053 38171 ia iasiptransceiver.cc SIP message size was reduced because it was over 1300 bytes. Optional fields have been removed. 1

670086 38172 ia iasipuseragent.cc Session replacement succeeded, but the session to update could not be found. 1

670232 38173 ia iasipvovidasipstack4.cc parseMine()detected that the received SIP message/content does not contain the type "application/sdp" nor "application/text" nor "message/sipfrag". The content of the SIP 4

670334 38174 ia iasiptransceiver.cc NULL address pointer 1

670335 38175 ia iasiptransceiver.cc Failed to decode incoming SIP message. 1

670808 38176 ia iasipuasession.cc Failed to get dest URL. 1

671064 38177 ia iasntpclient.cc The SNTP synchronisation failed. The requested timer server has not responded. 1

671065 38178 ia iasntpclient.cc The SNTP synchronisation is ok again. 1

671940 38179 ia iasntpclient.cc The given date/time values are impossible to configure. 1

671941 38180 ia iasntpclient.cc Could not open the communications interface. 1

671942 38181 ia iasntpclient.cc Could not send any data! 1

672990 38182 ia iasipuasession.cc Incoming message tried to change future routing and failed! 1

673007 38183 ia iaipuasession.cc Dialog establishment message contained multiple Contact: fields. 1

680448 38184 ia iasipregistrar.cc Tried to create a duplicate user! 1

680477 38185 ia iasipregistrar.cc removeUser(): User not found. 1

680523 38186 ia iasipuseragent.cc getSipProvider() was passed a non SIP URL. 1

680798 38187 ia iasdpsession.cc The payload in the RTP attribute of the incoming SDP is empty!!! 1

680804 38188 ia iadnslibrary.cc answerlen too big 1

680808 38189 ia iadnslibrary.cc rdLength greater than remaining length. 1

680936 38190 ia iasipuseragent.cc Invalid SipId 1

681187 38191 ia iadnslibrary.cc Overflow!, Memory has been overwritten! 1

681218 38192 ia iasipuasession.cc Failed to find original session when a session replacement failed! 1

681342 38193 ia iasdpsession.cc No valid ipAddress found! Do not know how to set the MediaAddress!!! 1

681343 38194 ia iasdpsession.cc The received media session contains more than one media sections with audio. Don't know how to set the MediaAddress!! Param1 is the number of media sections! 1

681347 38195 ia iasdpsession.cc The payload is not supported by the SDP session. Param1 is the payload which was tried to be set in the SDP session. 1

681350 38196 ia iasdpsession.cc The sectionlist had one entry, but when we try to access it, it's NULL!!! 1

681374 38197 ia iasdpsession.cc The SDP session did not contain an IP address. Neither in the session nor in the section!! This shouldn't happen. 1

681375 38198 ia iasdpsession.cc We couldn't get a section from the section list of the SDP session. 1

685866 38199 ia iasatterminal.cc Error in media control. See param1 for exact location. 1

685869 38200 ia iasatterminal.cc Invalid instance in timer! See param1 to find the location of this error. 1

685870 38201 ia iasatterminal.cc Terminal received strange status message. 1

685905 38202 ia iasattransceiver.cc SIP Aamadeus Transport: Transaction failure Param0 shows the concrete location. 1

685906 38203 ia iasattransceiver.cc SIP Aamadeus Transport: Invalid transaction type Param0 shows the concrete location. 1

685907 38204 ia iasattransceiver.cc SIP Aamadeus Transport: Internal error in IaSatTransceiverC Param0 shows the concrete location. 1

685908 38205 ia iasatuseragent.cc SIP Aamadeus Transport: IaSatTerminalC instance doesn't exist. Param0 shows the concrete location. 1

685912 38206 ia iasatterminal.cc Stimulus queue overload. 1

685913 38207 ia iasatterminal.cc Unexpected case in flow control 1

686100 38208 ia iasipcontentdata.cc The media section pointer is NULL. This is not good and shall not happen! 1

686158 38209 ia iasatuseragent.cc Couldn't initialize IaSIPAamadeusTranportSettings in DB. 1

686211 38210 ia iasipvovidautil.cc Vocal::Data corrupted! 1

686443 38211 ia iasatproc.cc Failed to send signal over the linkhandler. 1

688576 38212 ia iasipuasession.cc Found inconsistency in SDP support evaluation. Created a codec list for Mr but the SdpSession says something else - see param 2. 2

689440 38213 ia iasipuasession.cc Received event from Er in an unexpected state. The event was ignored! 1

690049 38214 ia iasipcontentdata.cc SDP was constructed with unsupported media type!!! Problem is located in the application which uses the SDP object. 1

690522 38215 ia iasatterminal.cc Stimulus size exceeds limits. Param0 holds the actual size. 1

693993 38216 ia iaailsyncservices.cc Remote proxy call timed out. 1

694017 38217 ia iaailagent.cc Received a string from OIP that is not XML! 1

694018 38218 ia iaailagent.cc Received data for an unregistered protocol 2

695028 38219 ia iasipuseragent.cc SIP Account Not Available. - Parameter 1: SIP Provider (IaSipExtProviderIdC) - Parameter 2: SIP External Account (IaSipExtAccountIdC) - Parameter 3: Cause (IaSipAlarmInfoEnu) 3

695029 38220 ia iasipuseragent.cc SIP Account Available - Parameter 1: SIP Provider (IaSipExtProviderIdC) - Parameter 2: SIP External Account (IaSipExtAccountIdC) 2

696918 38221 ia iadnslibrary.cc Incoming DNS header not correct. Decode failed 1

698198 38222 ia iasatmonitor.cc Failed to update control flags in the database 1

698333 38223 ia iasipuseragent.cc Invalid destination URL 1

703730 38224 ia iasipuseragent.cc REGISTER expiry time was too short. p0=external account id, p1=orig expiry, p2=new expiry 1

704065 38225 ia iasiptransceiver.cc Transaction is corrupted!, maybe it is being used after it has been deleted? 1

704071 38226 ia iasattransceiver.cc Transaction is corrupted!, maybe it is being used after it has been deleted? 1

705495 38227 ia iasipuseragent.cc The registrar handled a SUBSCRIBE request successfully, but did not return the corresponding user instance. 1

705496 38228 ia iasipregistrar.cc Sip Registrar received a non subscribe message 1

705497 38229 ia iasipuseragent.cc The myMessageObserver instance is not set in the IaSipUserAgentC 1

705591 38230 ia iasipuseragent.cc Null user point upon subscription expiration 1

705668 38231 ia iasipuseragent.cc The registrar returned no status message upon a subscription request 1

706485 38232 ia iasipeventhandlermwi.cc The dynamic cast of the event signal structure returned null 1

707141 38233 ia iasipaastraxmlserver.cc Error in Aastra SIP XML server. Parameter 1 shows the location. 1

707570 38234 ia iasatsipmessage.cc Encoder wrote off the end of its buffer. 1

707605 38235 ia iasatsipmessage.cc A string was truncated because the buffer was too small. 1

707836 38236 ia iasipaastraxmlserver.cc Error in the XML server, parameter 1 shows the location. 1

708087 38237 ia iasiptransceiver.cc The transaction got stuck and the protection timer fired. 1

708418 38238 ia iasipregistrar.cc Error in checkTerminalData(). The concrete location is shown by parameter 1. 2

708453 38239 ia iasipeventdispatcherblfsingle.cc No valid key for terminal 1

709268 38240 ia iasipeventhandler.cc The terminal id is invalid 1

709669 38241 ia iadnslibrary.cc Decode failure. 1

710777 38242 ia iasipeventdispatcherfactory.cc Alarm in case of reaching BLF limits -Parameter 1: SIP Username -Parameter 2: Terminal Id (0 if terminal is un-registered) 1

710783 38243 ia iasipeventdispatcherfactory.cc Alarm whenever a terminal attempts to subscribe after the BLF limits have been reached - Param 1: The Username of the monitored user - Param 2: The ID of the terminal that 1

711517 38244 ia iasipregistrar.cc There was an overflow in while converting the registration expiry time to msec 1

713731 38245 ia iasipeventhandlerblflist.cc The phone-number of the user passed in is was not in the initial notification 1

715805 38246 ia iasiptransport.cc Wasn't able to find a "Via: SIP/2.0/" string in the sent data 1

715809 38247 ia iasiptransport.cc An attempt to send data over TCP failed and we had to switch to UDP 1

716212 38248 ia iasiptransceiver.cc Data is pending 1

716213 38249 ia iasattransceiver.cc Data is pending 1

716620 38250 ia iasipsocket.cc The maximum number of SIP Message TCP-fragments is reached 1

716634 38251 ia iasipsocket.cc Parsed the Content-Length header, but was unable to read its value 1

720276 38252 ia iadnslibrary.cc Parsing of reccords failed! The counter variable becomes negative --> high number.... 1

720277 38253 ia iadnslibrary.cc Can not move the pointer! out-of-bount ... 1

720337 38254 ia iadnslibrary.cc The number of recursion restriction hit. DNS eintrag überprüfen! 2

721322 38255 ia iasiptransceiver.cc An INVITE Server transaction received an ACK while in the "Proceeding" state and was terminated (see br42584) 1

721660 38256 ia iasipuasession.cc This session did not receive an ACK for OKRetransTimeout and shall be terminated 1

722325 38257 ia iasrvldap.cc Unable to bring the PBX LDAP server socket in service! 1

722450 38258 ia iasiptransport.cc Could not make tcp client socket - Tcp socket limit reached Params: Open, Listening, Limit 1

722451 38259 ia iasipsocketfactory.cc Could not create tcp server sockets - Tcp socket limit reached Params: Open, Listening, Limit 1

722924 38260 ia iasipsocket.cc The tcp client socket connection timed out 1

724425 38261 ia iagmssmtpclientc.cc

E-mail send failed (req-519) Parameter1: XXYY XX is Reason Number YY is Action Number (ignore if "Undef") Reason number (XX): 0 Reason is undef 1 E-mail

container is full 2 SMTP server access Data are invalid 3 SMTP client is not able to connect the ser ver 4 Authentication failed 5 Permanent negative answer from the SMTP

server 6 Transient negative answer from the SMTP server 7 No answer from the SMTP server 8 E-mail attachment was not found 9 PBX host- or domain-name or IP-address

are invalid 10 E-mail body too big 11 E-mail attachment too big 12 E-mail attachment format not supported 13 No destination address specified 14 An invalid destination

address specified 15 Invalid sender address specified Action Number (YY): 0 Undef 1 Connecting to SMTP server 2 Extended announcement to SMTP server 3

Announcement to SMTP server 4 Transferring e-mail sender address 5 Transferring e-mail recipient address 6 Preparring data transfer 7 Data transfer in progress 8

Finishing data transfer 9 Preparring authentication (LOGIN) 10 Authentication username (LOGIN) 11 Authentication password (LOGIN) 12 Authentication (PLAIN) 13

Preparring encrypted authentication (CRAM-MD5) 14 Encrypted authentication (CRAM-MD5) 15 Preparring to send next e-mail Parameter2: Number E-mail client 0 5

724460 38262 ia iagmssmtpclientc.cc Can be reported after error-id 38261 (E-mail send failed) to add some informations 1

724511 38263 ia iagmssmtpclientc.cc function IaGmsSmtpClientTimerC::handleExpiry: smtpClientP is NULL 1

724512 38264 ia iagmssmtpclientc.cc function IaGmsSmtpClientC::handleConnectResponse called with an error-id (high-word of parameter0) 1

724513 38265 ia iagmssmtpclientc.cc function IaGmsSmtpClientC::doErrorAction: unexpected errorState (high-word of parameter0) 2

724514 38266 ia iagmssmtpclientc.cc function IaGmsSmtpClientC::doErrorAction: transient socket error (errorAction in high-word of parameter0) 3

724516 38267 ia iagmssmtpclientc.cc function IaGmsSmtpClientC::doErrorAction: transient-error (SMTP-RespNum in high-word of parameter0) 3

724517 38268 ia iagmssmtpclientc.cc function IaGmsSmtpClientC::doErrorAction: timeout-error 2

724518 38269 ia iagmssmtpclientc.cc function IaGmsSmtpClientC::getStateAlarmParam: a state is not filled in the function 2

724520 38270 ia iagmssmtpclientstatec.cc function IaGmsSmtpClientStateC::prepareForNextState (base-class) is called, which should not be done 2

724521 38271 ia iagmssmtpclientstatec.cc function IaGmsSmtpConnSocketStC::handleState is called, which should not be done 2

724522 38272 ia iagmssmtpclientstatec.cc function IaGmsSmtpRsetStC::checkStateDataResp: negative answer on reset-command 1

724523 38273 ia iagmssmtpclientstatec.cc function IaGmsSmtpQuitStC::checkStateDataResp: negative answer on quit-command 2

724524 38274 ia iagmssmtpclientc.cc function IaGmsSmtpClientC::deleteSmtpClientAndCheckIfNewEmail: the SMTP-client to delete is not found in ourSmtpClientContainer 2

724525 38275 ia iagmssmtpprocc.cc function IaGmsSmtpProcC::sendUpdateSatelliteCfg: negative answer from OsLnhDeviceSynchFacadeC::osLnhSend 1

724526 38276 ia iagmssmtpprocc.cc Satellite received MajorMinor(MajorNetworkEvent, NodeInService), which should not happen 1

724528 38277 ia iagmssmtpprocc.cc Master/Stand-alone received MajorMinor(MajorIaGms, IaGmsUpdateSmtpClientCfgSig), which should not happen 2

724529 38278 ia iagmssmtpprocc.cc function IaGmsSmtpProcC::handleSig: received signal in the default of the signal-switch got a negative answer from DlSktAsyncSocketC::handleSig 1

724648 38279 ia iagmsasynchfacadec.cc Parameter recipientList or subject or attachedFileName of function sendEmail is too big 1

725312 38280 ia iaalldhcpclientpublicinterface.cc Remote proxy call timed out. 1

725313 38281 ia iasrvdhcpsocket.cc openSocket() failed. 1

728619 38282 ia wssrvpkcs1.cc Failed to generate RSA keys. 1

728620 38283 ia wssrvpkcs1.cc Failed to decrypt data 1

729742 38284 ia iarmitriggercallc.cc SRM: One of the connection parameters which has been received are not filled in. The SRM data connection could not be established. 1

729743 38285 ia iarmitriggercallc.cc SRM: The received checksum didn't match the calculate one. The data connection to the SRM server couldn't be established. 1

729744 38286 ia iarmitriggercallc.cc SRM: The received data did not match the length of 48 chars. The data call to the SRM server couldn't be established. 1

730385 38287 ia iasipuseragent.cc An outgoing INVITE through a SIP Provider account has been suppressed because registration with the Provider is required but we are currently not registered 1

731039 38288 ia wssrvproc Failed to initialise web server 1

731700 38289 ia iasrvdhcpclientsession.cc It is not allowed to perform a "inform" request when the DHCP client session was used obtain all IP settings from the DHCP server. 1

732218 38290 ia iasipstatistic.cc Couldn't store date/time of file in string 1

732220 38291 ia iasipstatistic.cc Couldn't open file "/home/logs/statistic/sip/siplog.txt" for writing 1

732247 38292 ia iasipstatistic.cc problems zipping the log file 1

732499 38293 ia iasipuasession.cc Received a NOTIFY for a REFER in the wrong state 1

732631 38294 ia iasipuasession.cc Received a SIP Refer transfer command in an inappropriate state 1

733394 38295 ia iasipuseragent.cc Failed to create DoS object. 1

733707 38296 ia tisatterminal.cc Unused 2



733710 38299 ia tisatterminal.cc The received call related can't be handled, because it doesn't match either of the terminals calls. (param1: bcsRef of the event, param2: bcsRef of the primary call, param3: bcsRef 1

735344 38300 ia iasipeventdispatcherfactory.cc The Event Dispatcher Factory is deleted. All Subscription contexts are lost. 1

735416 38301 ia webs.c File uploaded to CPU2 is too large and has been aborted. P1 is the size attempted. 1

735513 38302 ia tisatterminal.cc Unexpected status message in call from terminal. Parameters: 1. call state 2. IP address of the terminal 3. Upper 16 bits: SIP method, lower 16 bits: Status Code 1

737623 38303 ia websSSL.c WEBS: Failed to load the private certificate. 1

737624 38304 ia websSSL.c WEBS: Failed to load the public certificate. 1

737630 38305 ia websSSL.c No certificates loaded. Not starting listener on port 443. 1

738572 38306 ia iadhcpserverinterface.cc Removing temporary file failed. 1

742677 38307 ia iasipuseragent.cc We just received a 503 to our (de-)REGISTER to a provider with a Retry-After value greater than 5 mins. The 503 was ignored and (de-)registration continues as usual. 1

742935 38308 ia websSSL.c WEBS: Using private certificate for public remote address because there is no public certificate. 1

742998 38309 ia webs.c Deferred write overflowed. Gave up and just flushed the data. 1

743074 38310 ia sym.c (GoAhead) A hash table is damaged. P1 = 'sp' P2 = 'i' P3 = 'tp->hash_table[i]' 1

743804 38311 ia ipsipvovidasipstack3.cc SipRawHeaderContainer vector is corrupted. P1 = _M_start P2 = _M_finish P3 = _M_end_of_storage 1

744008 38312 ia iacstaprotocolstack.cc The CSTA session has been terminated. 1

744009 38313 ia iacstaprotocolstack.cc The CSTA session has been re-established. 1

744764 38314 ia wssrvpbxobserver.cc CPU2 communication is in service 1

744765 38315 ia wssrvpbxobserver.cc CPU2 communication is out of service 1

745007 38316 ia iagmssmtpclientstatec.cc E-mail send ok 1

746594 38317 ia iasipproc.cc The received signal pointer is NULL 1

747396 38318 ia iasipregistrar.cc The licence limit for the Aastra SIP Terminal has been reached param1: 1, param2: 0 The Aastra SIP terminal licence is meant. param1: 0, param2: 1 The Aastra Video licence 2

747397 38319 ia iasipregistrar.cc The licence limit for the Standard SIP Terminal has been reached param1: 1, param2: 0 The Standard SIP terminal licence is meant. param1: 0, param2: 1 The Standard Video 2

747405 38320 ia iasipregistrar.cc The Standard SIP Terminal is within the licence limit again param1: 1, param2: 0 The Standard SIP terminal licence is meant. param1: 0, param2: 1 The Standard Video licence 2

747406 38321 ia iasipregistrar.cc The Aastra SIP Terminal is within the licence limit again param1: 1, param2: 0 The Aastra SIP terminal licence is meant. param1: 0, param2: 1 The Aastra Video licence is 2

748177 38322 ia iasipregistrar.cc

A BluStar licence limit has been reached param1: The "model" parameter of the X-Aastra-Id header or ?? param2: The licence type: (the values 0 and 1 aren't used for comp

reasons) 2: BSPC CTI 3: BSPC Softphone 4: BSPC Video option 5: BSPC Presence option 6: BSPC MS Lync plugin 7: BSPC Sametime plugin

param3: The number of total purchased licences 3

748178 38323 ia iasipregistrar.cc

A BluStar licence limit is OK again param1: The "model" parameter of the X-Aastra-Id header or ?? param2: The licence type: (the values 0 and 1 aren't used for comp reasons)

2: BSPC CTI 3: BSPC Softphone 4: BSPC Video option 5: BSPC Presence option 6: BSPC MS Lync plugin 7: BSPC Sametime plugin param3: The

number of total purchased licences 3

748180 38324 ia unused 3

748181 38325 ia unused 2

749733 38326 ia wssrvsubmithandler.cc Boundary definition was missing from the "Content-Type:" header of a POST. 1

750005 38327 ia wssrvsubmithandler.cc findBoundary() called when we don't have a boundary definition. 1

750891 38328 ia webs.c websWriteToSocket failed. 1

751949 38329 ia iasipuasession.cc Failed to find terminal while trying to create a new session. 1

752929 38330 ia ws/wssrvsubmithandler.cc couldn't create temporary directory for downloading files from webserver. param1 = errno 1

753625 38331 ia iasiplazysipmessage.cc Invalid message 1

754388 38332 ia iasiplazysipmessage.cc Blank line missing at end of headers. 1

755784 38333 ia iasiplazysipmessage.cc Failed to create message header. 1

756057 38334 ia iasipuseragent.cc The stored REGISTER/de-REGISTER is not useable. 1

756674 38335 ia iasipuseragent.cc Attempted to create an outgoing call on a session that doesn't support outgoing calls. 1

758105 38336 ia iasipregistrar.cc Error in parsing the X-Aastra-Id header. Param1 shows the location. 1

759050 38337 ia iasipregistrar.cc Dual Homing licence limit reached! 1

759051 38338 ia iasipregistrar.cc Dual Homing licence limit ok! 1

759830 38339 ia iacstatcpconnection.cc Discarded received data due to invalid message header! 1

760808 38340 ia iasipuamsrpsession.cc The phone number of the user related to the IaSipClient is empty. So we can't establish the MSRP session / conversation. 1

760833 38341 ia wssrvsessionhandlerc.cc There can't be a new WebSession be created because the limit of parallel WebSessions has been reached. param1: The remote ip address who wants to create a session 1

761073 38342 ia iamsrmsrpmsgc.cc Failed to decode MSRP message. 1

761074 38343 ia iamsrmsrpmsgc.cc NULL pointer passed to decode(). 1

761082 38344 ia iasmpmibhdl.cc MIB received an unknown blustar licence info. 2

761083 38345 ia iasmpmibhdl.cc MIB received a licence info, which it doesn't handle at the moment. 2

762900 38346 ia iasipcontentdata.cc addMediaSection(): on this position there's already a media section! 1

764765 38347 ia iamsrmsrptransceiver.cc The transport pointer is NULL! We cannot send the message to the peer!! 1

767350 38348 ia iasmpmibhdl.cc MIB received an DoS protection alarm, which could not behandled. 1

767351 38349 ia iasmpmibhdl.cc MIB received an DoS protection alarm, with an unknown reason. 1

767386 38350 ia iasmpmibhdl.cc MIB received a Language Package Download alarm, which could not behandled. 1

768860 38351 ia iasipvovidasipstack2.cc Error while decoding SIP header. 1

769679 38352 ia iasipuacstagateway.cc Error in the uaCSTA gateway. Param0 shows the location. 1

769771 38353 ia iasmpmibhdl.cc MIB received an LanguagePackDownload alarm, which could not behandled. 1

770359 38354 ia iadhcpclientobserver.cc Unable to send OSE signal to the DHCP client process. 1

772455 38355 ia iasipuseragent.cc Error in Transit-Counter <-> Max-Forwards value conversion. Param0: Location Param1: transitCounter Param2: maxTransitCount 1

772982 38356 ia iasipuacstagateway.cc The license limit for the Dialer has been reached 1

772983 38357 ia iasipuacstagateway.cc The Dialer is within the license limit again 1

774795 38358 ia iasmpmibhdl.cc function mapSmCircuitBoardTypeCToIgHwComponentBoardType: board not defined in MIB 1

774887 38359 ia ejparse.c Buffer overwrite when calling an ASP function See ramlog for details 2

777448 38360 ia iasmpmibhdl.cc Function updateSysMgntLangPackDownloadMibObjects: An filetype not defined in MIB has been received. 2

778155 38361 ia iasipuamediasessionc.cc For some reason the lazyStatusMsg is NULL!!! 1

779124 38362 ia iasiplazysipmessage.cc Vovida message has been accessed. This shouldn't be the case anymore. Param1 shows the location. 1

780854 38363 ia iasipuabasesessionc.cc Unexpected call of handleConfConnectedLineCall(). 2

782272 38364 ia iagtsdbaccessc.cc Could not read NTP configuration from localisation file. parameter 1: status parameter 2: location of code 1

784779 38365 ia unused 2

785337 38366 ia iagtsdbaccessc.cc Could not remove file from filesystem. parameter 1: errno parameter 2: location of code 1

788095 38367 ia iasmpmibhdl.cc MIB received an Configuration Template alarm, which could not behandled. 1

788301 38368 ia iasipuacstasessionc.cc Error while handling CSTA Session Supervision Timer. "CSTA session details unavailable". param0: Session-ID BR-59204 2

788582 38369 ia iasmpmibhdl.cc MIB received an Restricted Mode alarm, which could not behandled 1

789203 38370 ia iasipdnscache.cc IaSipDnsCacheC::FQDN_ListC the requested of resolving a service string by IaDnsResolverC::getHostBySrv failed and will go into the negative list for 2 minutes Parameter1, 2, 3: 3

789210 38371 ia iasipdnscache.cc IaSipDnsCacheC::SRV_ListC the requested of resolving a service string by IaDnsResolverC::getHostByName failed and will go into the negative list for 2 minutes Parameter1, 2, 3: 3

790444 38372 ia iasipeventhandler.cc

SIP Event Framework: The IP-Address for an external account of a provider was not be found. Without the IP-Address, SIP subscriptions to this account will not work (e.g.

Registration Event Package). Param 1: AccountId Param 2: 0 Param 3: 0 Please check if the provider does support this kind of subscriptions. 2

790476 38373 ia iasipeventhandlerclient.cc

SIP-Event Framework: A client subscription failed after several retries (5 minutes). The subscription is either for the registration event package or the BluStar Presence Server.

Param1: AccountId (External Account of a provider) Param2: RemoteNodeId (SIP Remote Node) Param3: 0 Please check if the provider or remote node supports this kind of

subscription. 1

791696 38374 ia iasipuamediasessionc.cc EMERGENCY CALL with unsupported protocol! Param1: XXYY, XX: endpointType: 1 Provider, 2 RemoteNode YY: ID of provider or remote node 2

792883 38375 ia iasmpmibhdl.cc MIB received an EmergencyCallStarted or EmergencyCallEnded alarm, which could not behandled. 1

793233 38376 ia iasmpmibhdl.cc The the value of the parameter alarmType in setLicenceSpecificRelatedStatusInMib() was not expected. (Param1 in the Errorlog contains the unexpected value) 1

630066 42001 d3 d3masynchbridge.cc error mapping D3SysSevEnuC to MaSysSevEnuC 1

630147 42003 d3 d3ad2cont.cc Error in device controller 1

630148 42004 d3 d3ad2dev.cc Error in the device 1

630149 42005 d3 d3ad2pa.cc Error in the pocket adapter 1

630150 42006 d3 d3ad2sbc.cc Error with the system base 1

630151 42007 d3 d3ad2terminal.cc, d3daslterminal.cc Error with the terminal device Parameter 1: termId. If termId is undef: nodeId(bit 24-32), slotId(bit 16-24), port(bit 8-16) and channel(bit 0-7) are written. 2

630154 42008 d3 d3ad2sbc.cc System Base has sent the stimulus "Soft Mute" which is no longer handled in the PBX. 1

630392 42009 d3 d3ad2cont.cc PortNbrMax must be greater than SmPortReferenceC::Max. 1

630583 42010 d3 d3ad2sbc.cc SBC received a TgDs signal with an unexpected minor type 1

630584 42011 d3 d3ad2sbc.cc SBC received a DpLog signal containing a request that it didn't understand. 1

630585 42012 d3 d3ad2sbc.cc

SBC received a L3Error message from the system base in a state other than Go. Parameter 1: mySybState 0 SbcStUndef, 1 SbcStInterfaceCheck, 2 SbcStPowerCheck, 3

SbcStDLAD2Srv, 4 SbcStDLEnd, 5 SbcStStatusCheck, 6 SbcStSetup, 7 SbcStLocalPowerCheck, 8 SbcStEnableRf, 9 SbcStDisableRf, 10 SbcStWaitForLocalPower,

11 SbcStRpnCheck, 12 SbcStWaitForPrimary, 13 SbcStSecAD2Check, 14 SbcStGo, 15 SbcStError, 16 SbcStDisabled Parameter2: High byte: Stimulus/event Code,

Low Byte: Exception type Details see swdoc-0321 2

630586 42013 d3 d3ad2sbc.cc StatusResp with unknown or wrong parameter received from system base. 2

630587 42014 d3 d3ad2sbc.cc StatusChange with unknown parameter received from system base. 1

630588 42015 d3 d3ad2sbc.cc Unexpected stimulus received from system base. 1

630589 42016 d3 d3ad2sbc.cc Invalid DECT-License. Check the DECT-License on the license chip 1

630651 42017 d3 d3ad2sbc

L3-Error received from system base. If the PBX receives a L3 Error message in state ?GO? (syscon state ?DECT?), it asks for System Base Status and generates an error log entry

42017 Parameters: 1st param portid(LA/SB), Prog_Status, systemStatus, resetCause 2nd param os_exc_old, os_exc_new , dest_id , event_id 3nd param

parameterH, parameterL , Stim/Ev-code, state Details see swdoc-0207 and swdoc-321. resetCause: 0=Power-up or Watchdog, 1=OS-exception, 2,3=Synch error/lost,

4=L1Reset, 5=L2Reset, 8=Reset from IIC. os_exc_old, os_exc_new: 00=No exception. First check os_excep_new. Additional information (valid variables in the moment the

exception occurred) is found in dest_id, state, event_id, parameterH, parameterL. If os_excep_new is = 0, check the resetCause. os_excep_new = 47: ParameterH = deviation, 2

630654 42018 d3 d3ad2dev.cc Too much power needed on this port reason : probably a system base is plugged on the same port as a terminal 1

630698 42019 d3 d3ad2sbc.cc New created D3Ad2SbcC object already existing in ourSbc[i]. This should never happen! 1

630699 42020 d3 d3ad2sbc.cc The maximum of system bases for this pbx is already reached. This system base gets disabled. 1

630700 42021 d3 d3ad2sbc.cc Destructor for an object called which was not found in ourSbc[i]. 1

630701 42022 d3 d3ad2sbc.cc Wrong or unexpected major received. 1

630702 42023 d3 d3ad2sbc.cc Unexpected inTmoType. 1

630703 42024 d3 d3ad2sbc.cc Wrong or unexpected minor. 1

630707 42025 d3 d3ad2sbc.cc timeout during power check. 1

630709 42026 d3 d3ad2sbc.cc We must go in state error, but no more errorlog needed. (Already reported in dpAllDbCreateSysBase). 1

630729 42027 d3 d3ad2sbc.cc system base didn't respond to log request. 1

630731 42028 d3 d3ad2sbc.cc SbcTmoStatus timer expired. 1

630741 42029 d3 d3ad2testmon An error occured in the Ad2 test agent 1

630749 42030 d3 d3ad2sbc.cc No DpDectNetwork object available during system base start up 1

630774 42031 d3 d3ad2terminal d3ad2cont stop request for the specific terminal 1

630779 42032 d3 d3ad2sbc.cc D3Ad2Device not found. 1

630792 42033 d3 d3ad2sbc.cc ourSbc array is full! 1

630793 42034 d3 d3ad2sbc.cc Device not found. 1

630970 42035 d3 d3ad2sbc.cc Attribute RFPISentToDevId != Undef during the start up of the primary AD2-Interface. 1

630980 42036 d3 d3ad2sbc.cc Unknown system base type. 1

630981 42037 d3 d3ad2sbc.cc Unexpected status information. 1

630982 42038 d3 d3ad2sbc.cc System base didn't response to a system capability message. 1

630983 42039 d3 d3ad2sbc.cc // System base didn't response to a setup dect message. 1

630984 42040 d3 d3ad2sbc.cc Secondary Start up conditions not fulfilled. Devices get disabled. 1

631086 42041 d3 d3ad2sbc.cc Wrong line length. This system base needs a reset. 1

631087 42042 d3 d3ad2sbc.cc This id is used for a system bases power supply alarm. It gets generated if a local power supply is needed but none is connected. 1

631113 42043 d3 d3ad2sbc.cc Primary device not found. 1

631148 42044 d3 d3ad2cont.cc Prxi requested a reset for this port. Parameter: SigMajor, SigMinor, Portref 2

634525 42045 d3 d3ad2sbc.cc System base with myDevId not found 1

638413 42046 d3 d3ad2sbc.cc Unexpected message in this state. 1

639009 42047 d3 d3ad2sbc.cc SbcTmoStCh timer expired. 1

640113 42048 d3 d3ad2sbc.cc System base didn't response to a layer 3 status message. 1

645214 42049 d3 d3ad2cont.cc portRef and channelId not found for the specified terminal id. 1

645222 42050 d3 d3ad2cont.cc terminal id not found for the specified portRef and channelId. 1

669382 42051 d3 d3ad2sbc.cc A DECT systembase is missing at the startup 1

673227 42052 d3 d3ad2sbc.cc Wrong synchState: Sync TS could not be connected to the system base 1

690172 42053 d3 d3ad2aaterm.cc Model Message too big. More than 255 Msg Sequences: 255*96 = 24480 Bytes 2

692461 42054 d3 d3ad2cont.cc No device found for this termId 1

692953 42055 d3 d3ad2aamringdriverc.cc No valid ring rhythm 1

692958 42056 d3 d3ad2cont.cc DeviceId not found 2

692959 42057 d3 d3ad2aamringdriverc.cc Something is strange with the ring rhythm 1

692960 42058 d3 d3ad2aamringdriverc.cc Strange melody 1

692961 42059 d3 d3ad2aamringdriverc.cc Unknown partner ring pattern 1




692968 42063 d3 d3ad2aamringdriverc.cc No valid ring rhythm 1

693314 42064 d3 d3ad2aamdisplaydriverl1c.cc No display action defined. 1

693315 42065 d3 d3ad2aamdisplaydriverl1c.cc Unknown display action. 1

693316 42066 d3 d3ad2aamdisplaydirverl1c.cc Unknown icon. Param1: unknown icon (AamIconEnu) 1

693317 42067 d3 d3ad2aamdisplaydriverl1c.cc Unknown symbol state. Param 1: unknown state (AamSymbolStateEnu) 1

693318 42068 d3 d3ad2aamdisplaydriverl1c.cc Unknown symbol. Param 1: unknown symbol (AamSymbolEnu) 1

693446 42069 d3 d3ad2aamadeusl1c.cc function hdlAamadeus, minor AamdeusKeyDef, no existing myKeydriver no longer used since i76 step 14 2

693447 42070 d3 d3ad2aamadeusl1c.cc function hdlTgAd2Sig, minor TaAd2Received, no existing myKeydriver no longer used since i76 step 14 2

693448 42071 d3 d3ad2aamadeusl1c.cc function hdlTTgCpSig, minor TTgCpIkc*, no existing myKeydriver no longer used since i76 step 14 2

693449 42072 d3 d3ad2aamadeusl1c.cc function hdlTTgCpSig, wrong minor 1

693475 42073 d3 d3ad2aamkeydriverl1c.cc function hdlAamadeus, wrong minor 3

693476 42074 d3 d3ad2aamkeydriverl1c.cc function hdlTTgCpSig, minor TTgCpIkc*, no existing myKeydriver 2

693477 42075 d3 d3ad2aamkeydriverl1c.cc function hdlTTgCp, wrong minor 2

693478 42076 d3 d3ad2aamkeydriverl1c.cc function hdlTgAd2, minor TTgCpIkc*, no existing myKeydriver 1

693479 42077 d3 d3ad2aamkeydriverl1c.cc function hdlTgAd2, wrong minor 2

693481 42078 d3 d3ad2aamkeydriverl1c.cc function hdlSig, wrong major 2

693484 42080 d3 d3ad2cont.cc function hdlTTgCpSig, no portRef and chanId for termId 1

693485 42081 d3 d3ad2swdl.cc Wrong state 2

693497 42082 d3 d3ad2cont.cc Device not available 2

693501 42083 d3 d3ad2aamleddriverc.cc Unknown led state. Param1: ledId (D3Ad2AamLeddriverC::LedId) Param2: unknown state (D3Ad2AamLeddriverC::LedState) 1

693502 42084 d3 d3ad2aamleddriverl1c.cc Unknown led. Param1: unknown led (D3Ad2AamLeddriverC::LedId) 1

693504 42085 d3 d3ad2ikccont.cc function stateMachine, wrong stimuli type 1

693506 42086 d3 d3ad2ikccont.cc function stateMachine, wrong key definition 1

693507 42087 d3 d3ad2ikccont.cc function handleTimeout, wrong minor 1

693508 42088 d3 d3ad2aaterm.cc ATM-Handshaking: AamadeusSend received but AtmFifoEmpty 3

693513 42089 d3 d3ad2ikccont.cc function stimLen, not expected value 1

693514 42090 d3 d3ad2ikccont.cc function stimStartParam, not exptected value 1

693515 42091 d3 d3ad2ikccont.cc function makeActionStim not expected activation 1

693517 42092 d3 d3ad2ikckeysm.cc function fsmError called 1

693519 42093 d3 d3swdproc.cc Unexpected Minor 3

693520 42094 d3 d3ad2aaterm.cc Unexpected Stimuli 2

693904 42095 d3 d3ad2ikchooksm.cc Error in hook detection IKC of D3 1

694596 42096 d3 d3ad2swdl.cc StatusChange timeout 1

694598 42097 d3 d3ad2swdl.cc StatisChange timeout 1

694599 42098 d3 d3ad2swdl.cc StatusResponse timeout 2

694602 42099 d3 d3ad2swdl.cc Unknown SwDl timeout 1

694604 42100 d3 d3ad2swdl.cc Invalid StatusResp Message content 1

694607 42101 d3 d3ad2swdl.cc Unexpected Stimulus 1

694609 42102 d3 d3ad2swdl.cc Invalid StatusChange message content 1

694610 42103 d3 d3ad2swdl.cc Unexpected Stimuli during SwDl erase 1

694611 42104 d3 d3ad2swdl.cc Invalid StatusChange message content 1

694612 42105 d3 d3ad2swdl.cc Invalid StatusResponse message content 1

694613 42106 d3 d3ad2swdl.cc Unexpected Stimuli during SwDl write 1

694614 42107 d3 d3ad2swdl.cc Downloadable code missing 1

694615 42108 d3 d3ad2swdl.cc Downloadable code checksum error 1

694616 42109 d3 d3ad2swdl.cc Downloadable code address error 1

694618 42110 d3 d3ad2swdl.cc Wrong length in StatusResponse Msg (SwVersionStructure) 1

694619 42111 d3 d3ad2swdl.cc RespFailCounter expired 2

694621 42112 d3 d3ad2swdl.cc EraseFailCounter expired 1

694622 42113 d3 d3ad2swdl.cc WriteFailCounter expired 1

694623 42114 d3 d3ad2swdl.cc SwDlL3Error 2

694624 42115 d3 d3ad2swdl.cc SwDlL3Error 1

694626 42116 d3 d3ad2swdl.cc Unexpected Stimuli 2


694628 42118 d3 d3ad2swdl.cc Unexpected Minor of MajorTerm 1

694629 42119 d3 d3ad2aaterm.cc ATM-Handshaking: Retransmission needed 2

694630 42120 d3 d3ad2aaterm.cc Wrong message content in StatusChange 2

694631 42121 d3 d3ad2aaterm.cc L3AD2DLTimeout but mySwDlP == NULL 2

694632 42122 d3 d3ad2aaterm.cc Unexpected L3DevAaCpuTimeout 2

694633 42123 d3 d3ad2aaterm.cc Wrong msg content in DppSigTStatusResp 2

694634 42124 d3 d3ad2aaterm.cc Unexpected Major 2

695163 42125 d3 d3ad2aamadeusl1c.cc This function should never be called. 1

700254 42126 d3 d3ad2aaterm.cc SwDlRes received but no SwDl in progress 1

700255 42127 d3 d3ad2aaterm.cc ATM-Handshaking: Too many retransmissions 2

700256 42128 d3 d3ad2aaterm.cc ATM-Handshaking: Wrong SeqId/NbrOfSeq 1

700257 42129 d3 d3ad2aaterm.cc ATM-Handshaking: DppSigTAtmCfm received but AtmFifo is empty 1

700258 42130 d3 d3ad2aaterm.cc Unexpected Minor 2

700259 42131 d3 d3ad2aaterm.cc Unexpected Minor 1

700260 42132 d3 d3ad2cont.cc Unexpected Minor 2

700261 42133 d3 d3ad2aaterm.cc Invalid ATM stimuli length 1

700262 42134 d3 d3ad2aaterm.cc ATM: Checksum error 1

700263 42135 d3 d3ad2aaterm.cc ATM: Sanity test (segment count and segment number) failed 1

700264 42136 d3 d3ad2aaterm.cc ATM: Sequence order check failed 1

700265 42137 d3 d3ad2aaterm.cc Unexpected statusInfo in statusChange Msg 1

700266 42138 d3 d3ad2aaterm.cc actSwDlEnd() called but mySwDlP == NULL 1

700272 42139 d3 d3ad2aaterm.cc Office70/80 Reset 1


700312 42141 d3 d3ad2aaterm.cc SwDlRes ignored (wrong msgId) 1


700314 42143 d3 d3ad2aaterm.cc ATM-Handshaking: AamadeusSend received but AtmFifoEmpty 1

700315 42144 d3 d3ad2aaterm.cc ATM-Handshaking: Retransmission needed 1

700316 42145 d3 d3ad2cont.cc Device not available 1



700320 42148 d3 d3swdproc.cc Unexpected Minor 1

701464 42149 d3 d3ad2aamaudiodriverc.cc Unexpected signal type 1

701465 42150 d3 d3ad2aamaudiodriverc.cc Unexpected device type 1

701466 42151 d3 d3ad2aamaudiodriverc.cc Unknown device 1

701818 42152 d3 d3ad2aamringdriverc.cc Unknown ring type 1

701823 42153 d3 d3ad2aamringdriverc.cc Unknown ring mode 1

701824 42154 d3 d3ad2aamringdriverc.cc AudioSequenceId exceeded 1

701825 42155 d3 d3ad2aamringdriverc.cc Updating ring rhythm failed. Pattern not found. 1

731986 42156 d3 d3ad2terminal.cc Incompatible terminal type on A4xx PBX. Office 20, 30, 40 are not supported any more. Parameter 1: myTermId Parameter 2: myTermType (1=Office 20, 2=Office 30, 3=Office 40) 3

741023 42157 d3 d3ad2dsiasynchfacadec.cc Failed to send signal to master. Param1: Major, Param2: Minor 1

741185 42158 d3 d3ad2sbc.cc Unknown major received P0: 0 P1: getNodeSlotPortCh() P2: Major 1

741187 42159 d3 d3ad2sbc.cc Download timeout. P0: 1 P1: myPortId P2: mySybState P3: type of timer 1

741188 42160 d3 d3ad2sbc.cc

Download message received but download process is not (no more) attached. This situation can occur if the D3Ad2Proc performs a port reset or gets asked by the L2Prx to do so

during a SwDl. If the MaSumProc stops running just before sending the next Erase/Write due to the higher priority of the D3Ad2Proc, it will continue to send the prepared message

before it handles the received detach signal from the D3Ad2Proc. P0: 0 P1: getNodeSlotPortCh() P2: dataP[0] 1

741190 42161 d3 d3ad2sbc.cc Download message received in wrong state P0: 0 P1: getNodeSlotPortCh() P2: getState() 1

741191 42162 d3 d3ad2sbc.cc SW download error received P0: 0 P1: getNodeSlotPortCh() P2: errorCause 1

741192 42163 d3 d3ad2sbc.cc SW download: Attached received in wrong state P0: 0 P1: getNodeSlotPortCh() P2: getState() 1

745314 42164 d3 d3ad2sbc.cc Negative alarm of alarm 42042 DectSystemBaseLPowerError (40): Counterpart alarm: DectSystemBaseLPowerOK (102) 1

745341 42165 d3 d3ad2sbc.cc Negative system base reset alarm,(counter part of alarm 12145): Gets generated if a system base has successfully restarted after a reset. 1

752492 42166 d3 d3ad2sbc.cc Incompatible terminal type on A4xx PBX. SB4 is not supported any more. Parameter 1: myTermId Parameter 2: myTermType 1

757583 42167 d3 d3ad2terminal.cc System Terminal out of order 1

757584 42168 d3 d3ad2terminal.cc System Terminal in service 1

785056 42169 d3 d3ad2sbc.cc Tried to start SW-download for not supported hw-revision P0: 0 P1: getNodeSlotPortCh() P3: hw-revision 1

630009 44001 fs fssgm.cc File System run out of memory. Deleting partwritten file, calling house keeper might help. If not, memory is full uf unique segments (valid data). 1

630010 44002 fs fssgm.cc Reading from flash failed because of a checksum error. The only case this happens is when two processes read and write concurrently from the same flash or the flash is gone. 1

630012 44003 fs fsfsg.cc This means the FS has reached the maximum possible number of files. Since this number will be reached only if the FS is full of one segment files this means also the FS is full. 1

630013 44004 fs fsinit.cc We can't format the file system. Panic! Crash! 1

630014 44005 fs fsbckbgproc.cc This signal is unknown by the filesystem 1

630592 44006 fs fsefsmonitor.cc Could not close the directory stream. This could end with a crash because of missing detaches. 1

630763 44007 fs fsefsio.cc Trying to call unimplemented function freopen(). OSE 4.4.1 does not support the function freopen(). NULL is returned 1

630797 44008 fs fsefsmonitor.cc Unexpected signal 1

630961 44009 fs fsefsio.cc funct. fsEfsStat() detected a problem with the status of the file in the root dir. 3

631191 44010 fs fsefsio.cc Caller to fsEfsVsnprintf has written more than the absolute maximum. P1=bytes written, P2=maximum, P3=process ID of the caller 1

631192 44011 fs fsefsio.cc Caller to fsEfsVsnprintf has attempted to write off the end of their buffer! This has been blocked to prevent corruption of the OSE buffer pool. P1=size of attempted write, 1

657166 44012 fs fsefsio.cc systemcall opendir failed. Parameter 1: errno, Parameter 2&3: first 8 characters of dirname 2

657167 44013 fs fsefsio.cc systemcall rmdir failed. Parameter 1: errno, Parameter 2&3: first 8 characters of dirname 2

657168 44014 fs fsefsio.cc systemcall chdir failed. Parameter 1: errno, Parameter 2&3: first 8 characters of path 2

657169 44015 fs fsefsio.cc systemcall remove failed. Parameter 1: errno Parameter 2: 1st part of the file name to be removed Parameter 3: 2nd part of the file name to be removed 5

657170 44016 fs fsefsio.cc systemcall create failed. Parameter 1: errno, Parameter 2: mode, Parameter 3: first 4 characters of filename 1

657171 44017 fs fsefsio.cc systemcall close failed. Parameter 1: errno, Parameter 2: fildes 1

657172 44018 fs fsefsio.cc systemcall closedir failed. Parameter 1: errno 1

657173 44019 fs fsefsio.cc systemcall fopen failed. Parameter 1: errno, Parameter 2: mode, Parameter 3: first 4 characters of filename 1

657174 44020 fs fsefsio.cc systemcall rename failed. Parameter 1: errno 1

657175 44021 fs fsefsio.cc systemcall fclose failed. Parameter 1: errno 1

657176 44022 fs fsefsio.cc systemcall open failed. Parameter 1: errno, Parameter 2: oflag, Parameter 3: amode 1

657177 44023 fs fsefsio.cc systemcall fdopen failed. Parameter 1: errno, Parameter 2: fildes, Parameter 3: first 4 characters of mode 1

665504 44024 fs fsefsdirc.cc Could not close the directory stream. This could end with a crash because of missing detaches. 1

665505 44025 fs fsefsdirc.cc Could not append "/" to a directory string. Directory service will fail. 1

665747 44026 fs fsefsidhandlerc.cc Try to free an id which was not allocated. 1

667143 44027 fs fsefsinformationc.cc The file system usage is over the critical limit. p1: FsFileTypeIdC p2: used size p3: reserved size 1

667144 44028 fs fsefsinformationc.cc The file system usage is under the critical limit again. p1: FsFileTypeIdC p2: used size p3: reserved size 1

667173 44029 fs fsefsinformationc.cc The file system usage is OVER the critical limit. p1: FsFileTypeIdC p2: usage 1

667174 44030 fs fsefsinformationc.cc The file system usage is UNDER the critical limit again. p1: FsFileTypeIdC p2: usage p1 - FsFileTypeIdC: only the value 0 (FsFileTypeIdFileSystem) is raised from the filemanager 2

689112 44031 fs fsefsinformationc.cc Unable to determine physical size of filesystem. Assuming a 64MByte filesystem. This errorid is used in fsefsobserverc.cc as well 2

694379 44032 fs fsefsio.cc Could not insert new element into myStreamContainer (map) because element does already exist. 1.Parameter = Position of existing element, 2. + 3.Parameter = Filename 1

694380 44033 fs fsefsio.cc Could not insert new element into myPrebarContainer (map) because element does already exist. 1.Parameter = Position of existing element, 2. + 3.Parameter = Filename 1

694381 44034 fs fsefsio.cc Could not delete element from myStreamContainer (map). 1.Parameter = Size of myStreamContainer, 2. + 3.Parameter = Filename 1

694382 44035 fs fsefsio.cc Could not delete element from myPrebarContainer (map). 1.Parameter = Size of myPrebarContainer, 2. + 3.Parameter = Filename 1

694383 44036 fs fsefsio.cc Could not delete element from myStreamContainer (map) in case __real_fclose failed. 1.Parameter = Size of myStreamContainer, 2. + 3.Parameter = Filename 1

694384 44037 fs fsefsio.cc Could not delete element from myPrebarContainer (map) in case __real_fclose failed. 1.Parameter = Size of myPrebarContainer, 2. + 3.Parameter = Filename 1

708061 44038 fs fsefsio.cc The path parameter to confirmPath() is garbage. Parameter 1 = endPos, Parameter 2 = InvalidPos 1

708062 44039 fs fsefsio.cc The subdirectory could not be created. Parameter 1 = errno 1

708063 44040 fs fsefsio.cc changing of directory failed. Parameter 1 = errno 1

708064 44041 fs fsefsio.cc returning to the original working directory failed. Parameter 1 = errno 1

719134 44042 fs fsefsio.cc Error while copying a file - the file might be corrupt. Param1: Bytes read during the last read cycle. Param2: Byte written during the last write cycle. 1

726852 44043 fs fsefsinformationc.cc FsEfsInformationC::getDirName() called with FsFileTypeId::Undef 3

726883 44044 fs fsefsinformationc.cc FsEfsInformationC::getUsedSize() called with FsFileTypeIdC::Undef 2

726884 44045 fs fsefsinformationc.cc FsEfsInformationC::getReservedSize() called with FsFileTypeIdC::Undef 1

726885 44046 fs fsefsinformationc.cc FsEfsInformationC::getDirSize() was passed an invalid fileType 1

730422 44047 fs fsefsnotificationhdlc.cc FsEfsNotificationHdlC::notifyDirSizeLimitAlreadyReached() called with fileType == FsFileTypeIdC::Undef 1

730423 44048 fs fsefsnotificationhdlc.cc FsEfsNotificationHdlC::notifyDirSizeLimitAlreadyReached() called with localNodeId == ArNodeIdC::Undef 2

734361 44049 fs fsefscommandhdlc.cc Delete reply command id is unknown. p1: command id p2: errno p3: - 1

734362 44050 fs fsefscommandhdlc.cc Rename reply command id is unknown. p1: command id p2: errno p3: - 1

734363 44051 fs fsefscommandhdlc.cc Directory reply command id is unknown. p1: command id p2: last p3: - 1

734364 44052 fs fsefscommandhdlc.cc Prebar reply command id is unknown. p1: command id p2: - p3: - 1

740371 44053 fs fsefsio.cc Could not create directory. Param1: errno 1

746954 44054 fs fsefsio.cc Unable to build absolute path for a given relative path. Param1: PID of the calling process Param2 & Param3: first 8 chars of the path 1

750979 44055 fs fsefsinformationc.cc Copy error in checkForDir() P1: cpyError P2: to size P3: name length could not copy given name (name length) into destination array (to size). 1

775836 44056 fs fsefsinformationc.cc Could not determine physical block size, we set the default block size of 4kByte. p1: errno The supervision of the directory size could be wrong, as the calculation is based on the 3

630897 46001 is isppplink.cc Junk unexpected signals, how rude! P1: (UInt32)sig->sigNo 1

630898 46002 is isppplinkproc.cc An unexpected signal received. P1: (UInt32)MajorOf(sigP->sig) P2: (UInt32)MinorOf(sigP->sig) 1



630901 46005 is ispppsocketmanager.cc An unexpected signal received. P1: MajorOf(aSignalP->sig) P2: MinorOf(aSignalP->sig) 1

630902 46006 is ispppsocketmanager.cc To attach a PPP device within INET failed. P1: (UInt32)unit 1

630903 46007 is ispppsocketmanager.cc The max of PPP devices has been reached! 1

630904 46008 is ispppta.cc An unexpected signal received. P1: MajorOf(aSignalPtr->sig) P2: MinorOf(aSignalPtr->sig) 1

630905 46009 is ispppta.cc Someone tries to attach a TA device twice. 1

630906 46010 is ispppta.cc Invalid state! P1: (UInt32) getState() 1

630907 46011 is ispppta.cc We are definitely in the wrong state. P1: (UInt32)getState() 1

630908 46012 is ispppta.cc We are definitely in the wrong state. P1: (UInt32)getState() 1

630962 46013 is ispppsocket.cc buffer overflow in PPP socket > 3000 bytes 1

630963 46014 is ispppsocket.cc no valid instance (null pointer) of IsPPPSocketLinkPtr. 1

630964 46015 is ispppsocket.cc Data length is 0. Don't forward it to the PPP stack. 1

631011 46016 is isallinit.cc Gateway is not reachable, please check your Ethernet config! P1=ipAddress, P2=netwask, P3=gateway 1

631111 46017 is ispppipaddressmanager.cc PPP IP address range too short. 1

631165 46018 is ispppta.cc The inactivity timeout was not treated. 1

631238 46019 is isppplink.cc Detected a NULL pointer in ppp_io_print(). 1

631269 46020 is isppplink.cc Login info structure is a NULL pointer! 1

643681 46021 is isethinet.cc Unexpected signal 1

644991 46022 is isethinet.cc The magic DHCP cookie must always exist. 1

645048 46023 is isethinet.cc Timeout while waiting for the DHCP ack signal from smSysProc_. 1

645049 46024 is isethinet.cc Cannot configure DNS client if the IP address of both, primary and secondary DNS server are invalid. 1

645052 46025 is isethinet.cc The DHCP client has reported a failure status. 1

645155 46026 is isethinet.cc Unexpected DHCP status. 1

646128 46027 is isallinit.cc Failed to find IsQOSSettings settings 1

646129 46028 is isallinit.cc Invalid L3 QoS tagging type 1

648717 46029 is ispppsynchinterface.cc Satellite calling getLoginInformatio()!! 1

648718 46030 is isdnsclient.cc The identification between the DNS query and the DNS answer failed. The answer from the DNS server was not expected. 1

648859 46031 is isallpublic.cc Unexpected QoS tag type. 1

648860 46032 is isallpublic.cc QoS settings not found. 1

648861 46033 is isethinet.cc Unexpected status in DHCP_RELEASE_REPLY received. 1

649331 46034 is isethinet.cc Timeout while waiting for the DHCP_RESPONSE signal from ose_dhcp_. 1

649726 46035 is isskteventhandlerproc.cc sendData() was passed a dud pointer 1

650287 46036 is isethinet.cc Attach of ethernet interface failed. 1

650288 46037 is isethinet.cc Detach of the ethernet interface failed. 1

650289 46038 is isethinet.cc Configuration of INET with ethernet failed. 1

650290 46039 is isethinet.cc Could not add the requested route. 1

650291 46040 is isethinet.cc Could not bring down the ethernet interface. 1

650292 46041 is isethinet.cc Could not configure the netmask. 1

650293 46042 is isethinet.cc Could not configure the IP address. 1

650294 46043 is isethinet.cc INET up reply has bad status value. 1

650308 46044 is isethinet.cc Could not bring up the ethernet interface. 1

650310 46045 is isethinet.cc Down Reply has bad status. 1

651025 46046 is isrtpctrlproc.cc Unknown connection type. 1

651064 46047 is isrtpctrlproc.cc Cannot find the switching table entries. 1

652113 46048 is isskteventhandler.cc We got rror EWOULDBLOCK when trying to send as a result of select() saying that it is possible to write now. 1

655870 46049 is isnatnapttranslator.cc We run out of NAPT ports! 1

655871 46050 is isnatnapttranslator.cc The port map is screwed up!!! 1

656307 46051 is isnatalgcomponent.cc Ups, the total length of the IP frame is smaller than the IP and TCP headers! We treat this failure like a TCP frame which carries no data. 1

656310 46052 is isnatalgftp.cc The data buffer is longer than expected. 1

657751 46053 is isskteventhandler.cc A corrupt sockInfo entry has been found in the socket mapper! 1

658521 46054 is isethinet.cc The dhcp client management failed! 1

658522 46055 is isethinet.cc The dhcp client configuration failed! 1

659308 46056 is isskteventhandler.cc Response from select process timed out! 1

660685 46057 is isrtpswtablec.cc Modification of the RTP switching table failed. Parameter 1 gives the location: 0 and 1 is in addEntry, 2 is in removeEntry. Parameter 2 holds the udpTableIndex. Parameter 3 2

663659 46058 is isskteventhandlerproc.cc Couldn't configure a INET socket to none blocking. 1

663660 46059 is isskteventhandlerproc.cc Someone tries to bind a port to a socket which is already occupied by a listener. 1

663661 46060 is isskteventhandlerproc.cc Couldn't stop the event interface. 1

663662 46061 is isskteventhandlerproc.cc We are dealing with a blocking socket. The eventhandler is not designed for that! 1

663664 46062 is isskteventhandlerproc.cc INET sytem call failed. fcntl( 1

663665 46063 is isskteventhandlerproc.cc Throw the new buffer away as the caller has been told not to send anymore and ignored that. 1

664635 46064 is isskteventhandlerproc.cc INET system call failed. (getpeername) 1

664636 46065 is isskteventhandlerproc.cc INET system call failed. (getsockname) 1

664638 46066 is isskteventhandlerproc.cc Duplicated INET socket descriptor detected. Ignore adding it to the read list. 1

664639 46067 is isskteventhandlerproc.cc Duplicated INET socket descriptor detected. Ignore adding it to the listener list. 1

664640 46068 is isskteventhandlerproc.cc Duplicated INET socket descriptor detected. Ignore adding it to the write list. 1

667836 46069 is isethinet.cc The creation of the requested DNS entry failed. 1

668601 46070 is isrtpswtablec.cc The request to add a new entry was not executed due to corrupt tables. There is a mismatch of RTP resources! 1

668602 46071 is isrtpswtablec.cc The tables point not to the same resource! The resource is not removed but tagged as invalid! 1

668603 46072 is isrtpswtablec.cc There is a mismatch with the internal RTP resources! The tables have tagged the entry as invalid. 1

672903 46073 is isallinit.cc Failed to create database instance 1

696379 46074 is isskteventhandlerproc.cc INET system call failed. setsockopt() 1

706360 46075 is ispppta.cc Data length is 0. Don't forward it to the PPP stack. 1

706987 46076 is isskteventhandlerproc.cc Failed to join the IP multicast group 1

706989 46077 is isskteventhandlerproc.cc None IP multicast address used 1

706990 46078 is isskteventhandlerproc.cc To leave the IP multicast club failed. 1

707138 46079 is isskteventhandlerproc.cc Could not re-configure the IP TTL value for the given multicast socket. 1

708808 46080 is isskteventhandlerproc.cc Was not able to configure explicit the multicast interface. 1

708809 46081 is isskteventhandlerproc.cc Was not able to switch off the mulitcast loop back. 1

711710 46082 is ispppasyncbuffer.cc Corrected index due to overflow. 1

712371 46083 is isskteventhandlerproc.cc FmHandle and SocketId mismatch! 1

727594 46084 is isrtpswtablec.cc Switching parameters in port entry are out of range. Parameter 1: DSP module slot ID (high 16 bit), DSP ID (low 16 bit) Parameter 2: DSP internal channel ID Parameter 3: DSP 1

728165 46085 is isarpasynchfacadec.cc Proxy interface timeout 1

735403 46086 is isrtpswtablec.cc The counter of active to net connections is not maintained correctly. Parameter 1: counter value, Parameter 2: 0, Parameter 3: 0. 1

735415 46087 is isrtpswtablec.cc The link destination ethernet MAC address was not received in time. The to net direction will have no audio because of this error. Parameter 1: remote IP address, Parameter 2: 4

736237 46088 is isdosprotection.cc DoS: An IP address was added to the blocked list. 1

736238 46089 is isdosprotection.cc DoS: An IP address was removed from the blocking list 1

737252 46090 is isdosprotection.cc The IP address could not be added to the blacklist 1

749587 46091 is isskteventhandlerproc.cc The call to listen() failed. P1 is the application port P2 is errno 1

765619 46092 is isdosprotection.cc An IP address was added to the black list. P1: IP address as hex P2: Reason 2

765621 46093 is isdosprotection.cc An IP address was removed from the black list. P1: IP address as hex 1

769820 46094 is isethrawsocketsend.cc system call failed: P1: procId P2: errno P3: place in the source code 1

784672 46095 is isskteventhandlerproc.cc Accept notify can't be treated due to missing internal data structure. 1

788180 46096 is isallasynchfacadec.cc Sending signal over linkhandler failed. param1: location 1

789132 46097 is iscfgstaticroutes.cc Failed closing file. 1

789133 46098 is iscfgstaticroutes.cc Failure when accessing the MSL database. param1: location in the code param2: errno 1

630993 48001 um umsmcextsessionhdl.cc This errorid is used to generate an alarm when the link between the session handler and the external SME is down. 1

631007 48002 um umsmppdus.cc Length mismatch 1

631008 48003 um umsmppdus.cc Imvalid packet length 1

631009 48004 um umsmppublictypes.cc Unrecogised tag. 1

631010 48005 um umsmpsequencenumberallocator.hh Someone tried to delete the Sequence Number Allocator singleton! 1

631012 48006 um umsmcextsessionhdl.cc Failed to find external session pointer in container. 1

631038 48007 um umsmcmsgmgr.cc The instance of the SMSC was not found in the DS. Could not update timer values. 1

631039 48008 um umsmcmsgmgr.cc The creation of a timer phantom failed in the restoreSMSC method. So it was not possible to activate the SM stored in the DS. Param1 is the SM Identifier (SequenceNumber) 1

631040 48009 um umsmcmsgmgr.cc The creation of a timer phantom was not possible while the SM was prepared to send to an externESME. Note the SM is stored in the DS but no retrans-/validity timer was 1

631041 48010 um umsmcmsgmgr.cc It was not possible to create a temporary phantom. The SM to an internal subscriber was not possible. The param1 is the source address, param2 is the destination address. 1

631042 48011 um umsmcmsgmgr.cc It was not possible to create a timer phantom during the preparation of a Deliver msg (ACK) which was send to an external ESME. Param1 is the Id for the SM stored in the DS. 1

631043 48012 um umsmcmsgmgr.cc The creation of a timer phantom failed during the preparation of a Deliver Ack which was sent to the external ESME. Note the SM is stored now in the DS. The Id of the SM is 1

631044 48013 um umsmcmsgmgr.cc The TA in the DS failed. The data is not stored in the DS. If this happens, it seems to be that the system has major problems. Maybe it's better to reset the PBX. The Param1 1

631045 48014 um umsmcmsgmgr.cc The ESME sent the SMSC a Deliver msg with a commandStatus which is not handled. The Param1 indicates the received commandStatus. 1

631046 48015 um umsmcmsgmgr.cc The pointer to the SMPP PDU in the method deliverRespMessage() was NULL. 1

631047 48016 um umsmcmsgmgr.cc The pointer to the generated Deliver was NULL. It seems that the SMPP library has a problem in the make method. 1

631048 48017 um umsmcmsgmgr.cc Either the pointer to the Submit message or the Id of the ESME was NULL or Undef. This is a system error and should not occure. 1

631049 48018 um umsmcmsgmgr.cc The external session handler which belongs to the Id of the ESME was not found in the map. So either the external session handler died or the map which contains the sessionHdl 1

631050 48019 um umsmcmsgmgr.cc An internal DeliverResp message contained a message type which was not expected. The Param1 contains the type. 1

631051 48020 um umsmcmsgmgr.cc The commandStatus of the internal DeliverResp contained an unexpected value. The value is copied to Param1. 1

631052 48021 um umsmcmsgmgr.cc The requested DataCoding in the received Submit (external) is not supported by the SMSC. Param1 contains the requested DataCoding. 1

631053 48022 um umsmcmsgmgr.cc The numberinplan cache has a problem with the destination address of the SM. The SM was not delivered to the destination. If this happens, maybe it's time to restart the PBX. 1

631054 48023 um umsmcmsgmgr.cc The ESME Id which is stored in the PISN instance in the DS does not match an existing ESME instance. It's most likely that the system is corrupt. Param1 contains the destAddr, 1

631055 48024 um umsmcmsgmgr.cc The destAddr is not a PISN. Seems to be that the Xa fct. analExact() has a problem or the system is corrupt. Param1 is the reveived DestAddr, Param2 is the numRef which was 1

631056 48025 um umsmcmsgmgr.cc The default ESME was not found by the system. This should not happen, because the consistency checks in the configuration prevent this. So we crash the system. 1

631057 48026 um umsmcmsgmgr.cc Received an alertNotification where a SM is stored in the DS but no timer phantom does exist!!!! This can only happen in the handleDeliver() where it was not possible to create 1

631058 48027 um umsmcmsgmgr.cc It was not possible to create the SM in the DS. Param1 is the srcAddr, Param2 is the destAddr. Note: This is only a warning. The problem was propably that the maximum of stored 2

631059 48028 um umsmcmsgmgr.cc The UmSmpRegisteredDeliveryC contained a value which is unkonw by the SMSC. Param1 contains theceipt value. 1

631060 48029 um umsmcmsgmgr.cc The deliver msg contains an UmSmpEsmClassC::MessageTypeEnu which is not kown by the SMSC. Param1 contains the received value. 1

631061 48030 um umsmcmsgmgr.cc The mapping between the sequenceNumber of the SM and the SM Key to the DS has failed. Seems to be that the map is corrupt. Param1 is the sequenceNumber. 1

631062 48031 um umsmcmsgmgr.cc Seems to be that somebody has deleted the ESME from the system or if this is not the case, the system is corrupt!! Param1/2 contains the src-/destAddr where the Deliver Ack 1

631063 48032 um umsmcmsgmgr.cc The shortMessage Id does not match a SM stored in the DS! The Deliver Ack could not be send to the originator which has requested this in the Submit. Param1/2 contains the src- 1

631064 48033 um umsmcmsgmgr.cc The origination side of the SM was an external number which should not foreseen in the 1st phase of the messaging. Param1 contains the number. 1

631065 48034 um umsmcphantdel.cc The method handlePhanDelValidTimerExpiry() was called on a temporary phantom. This is wrong, a tempPhantom has no valditiy timer started!!! Coding error! 1

631066 48035 um umsmcphantdel.cc The method handlePhanDelRetransTimerExpiry() was called on a temporary phantom. This is wrong, a tempPhantom has no retransmission timer started!!! Coding error! 1

631067 48036 um umsmcphantdel.cc The method handleAlertNotify() was called on a temporary phantom. This is not correct!! 1

631068 48037 um umsmcresptimer.cc The pointer to the external session handler was NULL! So either the configuration has changed and the ext.SessionHdl hasn't killed the response timer or a system error happened. 1

631069 48038 um umsmcresptimer.cc The response watchdog contained a CommandId which is not handled in the timerExpiry method. [ 1

631070 48039 um umsmcextsessionhdl.cc The extSessionMux called the method handleIncomingConnection() which is not allowed. 1

631071 48040 um umsmcextsessionhdl.cc The construction of the SMPP PDU failed in the make() method of the SMPP library. The input data for the PDU were received from the DL socket. 1

631072 48041 um umsmcextsessionhdl.cc The dataP or the length of the dataP received from the DL socket was set to NULL/0. 1

631073 48042 um umsmcextsessionhdl.cc Somebody send us a SMPP PDU but we were not bound to this peer! Param1 is the IP Addr. of the peer. 1

631074 48043 um umsmcextsessionhdl.cc The SMPP PDU which was received contains a commandId which is not handled in the ExtSessionMux. Param1 contains the commandId. 1

631075 48044 um umsmcextsessionhdl.cc DL reported an error during the sending of the SMPP PDU. Param1 is the Dl error. 1

631076 48045 um umsmcextsessionhdl.cc The send method of the UDP socket returned false, the SMPP PDU was not send. 1

631077 48046 um umsmcextsessionhdl.cc An Unbind message was received by the extSessionHdl from the peer, but the session was already unbound. Param1 is the IpAddr of the peer which sent the unbind req. 1

631078 48047 um umsmcextsessionhdl.cc The session handler received an unBind response, where the commandStatus contains an unexpected value. Param1 is the commandStatus, Param2 is the peerAddr 1

631079 48048 um umsmcextsessiohdl.cc The peer sent us a deliverResp which contains a SeqNb that is not known in our SMSC. Param1 is the seqNr, Param2 is the IpAddr of the peer. 1

631080 48049 um umsmcextsessionhdl.cc The class variable where the IP Addr of the Peer is stored, contains the value NULL. This should not happen. Coding error or system has a problem. 1

631081 48050 um umsmcextsessionhdl.cc The peer sent us an EnquireLink request and the session was not bound. Param1 contains the Ip Addr of the peer. 1

631082 48051 um umsmcproc.cc The submitMessage returned an error. This should not happen. 1

631083 48052 um umsmcproc.cc The pointer to the SMSC singleton was NULL. This should not happen. 1

631084 48053 um umsmcproc.cc The deliverRespMessage in the SMSC returned an error. This should not happen. 1

631085 48054 um umsmcmsgmgr.cc The storage capacity of the SMSC exceeded, the deliver Acknowledge to the orignation side could not be sent. Param1 is the source address, Param2 the destination address. 1

631089 48055 um umsmcmsgmgr.cc Number of stored SMs in the DS is inconsistent to the counter in the SMSC. Param1 is the number found in the DS, Param2 is the counter in the SMSC. 1

631102 48056 um umsmppdus.cc Caller passed a NULL pointer to a library function. 1

631105 48057 um umsmcextsessionhdl.cc The pointer to the external session handler is NULL, which is strange because 5 lines above it was valid. 1

631106 48058 um umsmcextsessionhdl.cc The encryption status of the received SMPP Pdu does not match the setting of the encryption for this ESME in ASCOTEL. Param1 Encryp of PDU, Param2 Encry in DS of ASCOTEL. 1

631107 48059 um umsmcmsgmgr.cc The response timer of a temp. phantom could be stopped because it seems to be that it was expiring at that very moment. This is only a warning to see how often this will happen. 1

631121 48060 um umsmcproc.cc There is no license for SMPP. 2

631123 48061 um umsmcextsessionhdl.cc The decoded PDU does not match the decoded command ID. P1 is the command ID 1

631167 48062 um umsmcmsgmgr.cc While restoring the SMSC, it was not possible to send the DELIVER message to its related interface. Param1 is the new seqNb generated by the SMSC, param2 is the source addr., 1

631168 48063 um umsmcphantdel.cc A short message was deleted after the destination hasn't responded and the validity time expired. Note the short message was not delivered. Please verify that the response timer 1

631169 48064 um umsmcmsgmgr.cc We seem to have lost a timer expiry message!, oops. 1

632556 48065 um umsmcmsgmgr.cc The external session either does not exist or it is not bound. 1

650442 48066 um umsmcphantdel.cc The SMs was not stored in the DataStorage because of internal storage problems. The SMs is deleted from the SMSC. 2

664415 48067 um umsmcmsgmgr.cc Restoring the SMSC durning startup of the PBX, reported an error. 1

665863 48068 um umsmcmsgmgr.cc The setSeqNumber() of the persistent shortMessage failed. The delivery of this SM is skipped!! 1

745498 48069 um umsmcmsgmgr.cc This is the counterpart to alarm 48002. Means that the configuration problem regarding the Gateway Esme was found and the SMS could be sent via this to its destination. 2

745551 48070 um umsmcextsessionhdl.cc This is the counterpart to alarm 48001. The link between the PBX and the ESME is established again. 2

759245 48071 um ummsrendpointc.cc The abstract factory didn't find the correct role of the endpoint. This is a major problem. 1

759246 48072 um ummsrendpointc.cc The call leg was not in our endpoint map. Therefore, we were not able to delete the endpoint. Param1: callLegId 1

763344 48073 um ummsragentc.cc Couldn't allocate a callLegId for the endpoint. 1

631013 50001 er ertelcallrefmapc.cc Telephony: the tuple already exists in the map 1

631014 50002 er ertelcallrefmapc.cc Telephony: the tuple does not exist in the map 1

631016 50003 er ertelcallrefmapc.cc Telephony: invalid bcsRef 1

631017 50004 er ertelfillinsignalheadc.cc Telephony: invalid portRef 1

631018 50005 er ertelsignaltpc.cc Telephony: invalid callRef 1

631019 50006 er ertelfillinsignalheadc.cc Telephony: cannot allocate callRef 1

631020 50007 er ertelsignaltpc.cc Telephony: cannot allocate bcsRef 1

631021 50008 er ertelfillinsignalheadc.cc Telephony: invalid signal pointer 1

631022 50009 er ertelsignaltpc.cc Telephony: invalid signal major 1

631023 50010 er ertelsignalxac.cc Telephony: wrong protocol type 1

631024 50011 er ertelsignalagnc.cc Telephony: unknown sender process 1

631025 50012 er ermsgsignalagnc.cc Messaging: invalid signal minor 1

631026 50013 er ermsgsignalagnc.cc Messaging: unknown destination process 1

631027 50014 er ermsgsignalagnc.cc Messaging: sequence number not found in the cache 1

631028 50015 er ermsgsignalagnc.cc Messaging: unexpected message type 1

631029 50016 er ermsgsignalagnc.cc Messaging: unexpected destination type 1

631030 50017 er ermsgsignalagnc.cc Messaging: unexpected subscriber category 1

631031 50018 er ermsgsignalagnc.cc Messaging: invalid group destination number 1

631032 50019 er ermsgsignalagnc.cc Messaging: no members in the message group 1

631033 50020 er ermsgsignalagnc.cc Messaging: unknown destination location 1

631037 50021 er ertelsignaltpc.cc Telephony: cannot map signal 1

631090 50022 er ertelmappingc.cc Telephony: unexpected TEP type 1

631092 50023 er ertelfillinsignalheadc.cc ER Telephony: unmatched portRefs 1

631093 50024 er ertelsignaltpc.cc ER Telephony: incoming TaCe signal contains invalid bcsRef 1

631099 50025 er ertelcallrefpool.cc ER Telephony: port incorrectly configured 1

631100 50026 er ertelcallrefpool.cc ER Telephony: call reference value is not valid in the pool and thus it cannot be deallocated 1

631112 50027 er ertelsignalxac.cc Telephony: invalid signal minor 1

631124 50028 er ermsgsignalagnc.cc Messaging: unexpected sender process 1

631174 50029 er ermsgcache.cc ER Messaging: the cache size increased above the normal limit (seqNr hangers ?) 1

631175 50030 er ermsgsignalagnc.cc Messaging: unexpected response for message to group 1

631207 50031 er erlibmcdc.cc ER Telephony: too many facility info elements 1

631208 50032 er ermsgsignalagnc.cc ER Messaging: the sender subsId has no number 1

635751 50033 er ertelcallrefmapc.cc Telephony: invalid parameters in bcsRef map accessor function 1

635752 50034 er ertelfillinsignalheadc.cc Telephony: unexpected signal in XA bridged function fillInHead. 1

652226 50035 er erplcbasecall.cc The PCl state machine received an unexpected event. 1

652712 50036 er erplssession.cc The port was neither a SIP Trunk nor a SIP user !!! Something is wrong with the portRef which the SIP adapter received. 1

652713 50037 er erplssession.cc - Our session pointer is NULL!! This is more than strange!!! - Or the BcsRef could not be reserved - Or an unexpected event occured in ErPls The parameter 1 defines the exact 2

652727 50038 er erplssession.cc Somebody tried to free a B-Channel in our B-Channel pool which is already free!!!! 1

652965 50039 er erplssession.cc The termination side was incorrect or invalid!! 1

652982 50040 er ersignalxac.cc Setup received for external SIP without valid channel-id. 1

652984 50041 er ertelsignalxac.cc bcsRef not found in mapping table for SIP call. 2

652985 50042 er ertelsigpclc.cc Invalid channel id received for an external SIP call. 1

652991 50043 er ertelsigpclc.cc Invalid Port Reference or Port Type for SIP 1

653043 50044 er ertelcallidmapperc.cc There is already such an entry stored in the mapper. 1

653044 50045 er ertelcallidmapperc.cc There is no such entry stored in the mapper. 1

653146 50046 er ertelsignalxa Problem with call id map. 2

656153 50047 er erplssession.cc A connect is not allowed in this state! 1

657260 50048 er erplssession.cc It was not expected that this peer is the sender of this message. Param1 shows the sender side. 1

657308 50049 er erlibmcdc.cc Undefined S2 message type (filled in param0). 1

657310 50050 er erlibmcdc.cc Message decomposition error. 1

657393 50051 er erplssession.cc The given Called Pty Number was not found in the numbering plan. 1

657394 50052 er erplssession.cc Wrong mode (either Connection or Tone) to get the call related data from RM. 1

657395 50053 er erplssession.cc Not all possibilities have been verified to set the data to get the call related IP data from RM. 1

657645 50054 er ertelcallidmapperc.cc Trying to create a mapping with an invalid callId or bcsRef. 1

657648 50055 er ertelsigpclc.cc Trying to send a message to XA with an invalid bcsRef. Paramters: bcsRef, callId, sigNr (Major and Minor) 1

660330 50056 er ertelsignalxac.cc We received a TaCeONotify containing a NotifyDescription which we do not support at the moment. Param1 contains the coding of the description. 1

660859 50057 er erplbinterface.cc The called method is not implemented!! 1

660861 50058 er erplbsession.cc The session does not support this method!! 1

660862 50059 er erplbsession.cc The termination side was wrong. 1

661060 50060 er erplcbasecall.cc The pointer to the interface of the endpoint was NULL, so we couldn't send/forward the request!! 1

661294 50061 er erplsinterface.cc This method is not implemented! 1

662775 50062 er erplspseudosession.cc This method shouldn't be called! 1

662985 50063 er erplspseudosession.cc The pointer to our Call Handler is NULL!!! 1

663230 50064 er erplssession.cc This method is not implemented in the base class and should never be called. 1

671624 50065 er erplssession.cc This is a clash situation during the call termination. 1

699378 50066 er erplsproc.cc Error while handling a MediaUpdate related signal. Parameter 1 shows the location. 1

706274 50067 er erplssession.cc We received from SIP neither a provider Id nor a terminal id!! The call will not be successful. 1

708834 50068 er erplssession.cc Error in sessionMap management. See param1 for exact location. 1

732503 50069 er ertelsigpclc.cc An call transfer was signalled for an interface SIP user, this should only take place on a trunk 1

747240 50070 er erpleinterface.cc The called method is not implemented!! 1

747246 50071 er erpleproc.cc Functions in that module get unexpected signals 1

747258 50072 er erplesession.cc The session does not support this method!! 1

747259 50073 er erplesession.cc Our session pointer is NULL!! This is more than strange!!! 1

747260 50074 er erplesession.cc The termination side was wrong. 1

747261 50075 er erplesession.cc The termination side was incorrect or invalid!! 1

748534 50076 er erplecasinterfacec.cc PortRef and Channel not found for CallId 1

750457 50077 er erplesession.cc Function ErPleTimerC::handleExpiry: newState and oldState are different 1

751960 50078 er erplecasinterfacec.cc The Interface doesn't support this method 2

751962 50079 er erplcinterface.cc The Interface doesn't support this method 1

766084 50080 er erplssession.cc Couldn't handle CallTransferInfo from Pbx. See parameters for location. 1

771864 50081 er erplcbasecall.cc Invalid LineId! 2

774804 50082 er erplssession.cc Error related to the media state handling of the session. See param 3 for location! 1

648624 52001 ag agallsocket.cc Connection to IP terminal lost 1

649513 52002 ag agallproc.cc Invalid terminalId received from TP 1

649514 52003 ag agallproc.cc Invalid msn received from CR 1

649521 52004 ag agallproc.cc Invalid Msn received in Software upload signal 1

655572 52005 ag agalldev.cc AgAllSocket *mySocket is zero. Invalid! 1

655762 52006 ag agalldev.cc Invalid terminal type received 1

657234 52007 ag agallsocket.cc Connection to IP-Phone reestablished. Param1 is the subscriber number. 1

659901 52008 ag agallproc.cc Signal for non existing device received 2

659902 52009 ag agallproc.cc Signal for non existing socket received 1

659903 52010 ag agallproc.cc Invalid signal for Ag domain received 1

659965 52011 ag agalldev.cc Unexpected database problem 1

664911 52012 ag agalldev.cc The IP Phone signalled either an upload complete or upload request to the PBX. This minor is not handled at the moment. 1

665876 52013 ag agallsocket.cc Data could not be sent through DL socket (network problem?). Phone deregistered. 1

667076 52014 ag agallproc.cc CR signal received for an already deregistered phone 1

669976 52015 ag agallsocket.cc The service 'getMasterIpAddress' returned an undefined ip address 1

671846 52016 ag agalldev.cc Internal error. 1

671847 52017 ag agalltpktdeviceinterfacec.cc Unexpected message 1

671848 52018 ag agalltpktdeviceinterfacec.cc Invalid stimulus contents 1

681194 52019 ag agallgatewayc.cc Deleting a device, which has an active connection. 1

687878 52020 ag xxx alarm: NotEnoughOfficeIPLicences We ran out of OfficeIP licences - sorry it is not possible to register any further IP-Phone. 1

687879 52021 ag xxx alarm: AgainEnoughOfficeIPLicences This is the indication that it is possible to register further Office IP-phones to the PBX. 1

693124 52022 ag agalldev.cc Invalid switching command for MSN. Param1 is MSN Param2 is PeerIPAddr Param3 is PeerRTPPort and LocalRTPPort 1

694554 52023 ag agallproc.cc Timed out while waiting for response from MaSum 1

713233 52024 ag agallgatewayc.cc Deleting a device interface, which will be used later, part1 1

713234 52025 ag agallgatewayc.cc Deleting a device interface, which will be used later, part2 1

735991 52026 ag agallproc.cc Sw upload request to Ma timed out. No response received for about 10sec. Ma seems to be busy or does not handle the SwUploadInfo signal. 1

748529 52027 ag agallproc.cc WRONG phoneId in SwUploadInfo from MA!!! 1

645283 54001 mr mrnwkipterminalc.cc

The persistent MrOfficeIPTerminal object could not be found. The error appears when a SIP terminal is not registered. Then Mr gets a "reserve" request from Rm for this

user/terminal and it detects that this terminal is not registered and it is not able to execute the required action. Please check if a "ununsed" SIP terminal is in your configuration -

if so please remove it. Afterwards, this error should not appear anymore. 2

645378 54002 mr mrnwkroutec.cc Attempt to change forced codec settings 1

645517 54003 mr mrnwklansegmentc.cc The corresponding BandwidthControlArea database object couldn't be found! 1

645691 54004 mr mrnwkwanlinkc.cc srcNE should point either to routerA or to routerB 1

645692 54005 mr mrnwkwanlinkc.cc the boundary MrNwkRouterC objects should already exist 1

645693 54006 mr mrnwkwanlinkc.cc the persistent MrWANLink object should already exist 1

645694 54007 mr mrnwkwanlinkc.cc the boundary MrNwkLANSegmentC objects should already exist 1

645814 54008 mr mrnwkrouterc.cc getSegmentForDest(): No explicit or default rule could be found for destination. 1

648492 54009 mr mrnwknetworkc.cc Route to reuse doesn't exists. 1

648529 54010 mr mrnwkwanlinkc.cc Insufficient Bandwidth for the new Media Stream. (Alarm) 1

648530 54011 mr mrnwkpbxnodec.cc Lack of VoIP channels on node (Alarm) Param1: nrOfVoIPChannels 2

648774 54012 mr mrnwkpbxnodec.cc Board can't be added, because it is not existing in the DB 1

650229 54013 mr mrnwkmediaslotc.cc an interface is deleted but there are still routes using it 1

650390 54014 mr mrnwkroutec.cc a segment is deleted but there are still routes using it 1

651660 54015 mr mrnwkmediaslotc.cc Attempt to unreserve a media slot which is not reserved in any context. 1

659114 54016 mr mrnwkmediaslotc.cc

Attempt to unreserve a media slot which is reserved in an other context. This can happen if the AIP resets during a call, and after it a new route is reserved over the previously

used mediaslot, while the old route (related to the call before the reset) still refers to it. Now if one clears down the old call the code runs here though 1

661279 54017 mr mrnwkipinterfacec.cc No more VoIP licence available. 1

662279 54018 mr mrnwkmanprocc.cc AIP ETH port has been disconnected from the LAN during an active connection. 1

662451 54019 mr mrnwkroutec.cc Both sides of the route should use the same payload type if they support telephone events. 1

663367 54020 mr mrnwkipinterfacec.cc Insufficient number of VoIP licences for the new Media Stream 1

664082 54021 mr mrnwkroutec.cc SIP peer selects new codecs, but the selected codecs are not possible! This shouldn't happen, because we offer only those codes, which are possible and it shouldn't answer with 1

664091 54022 mr mrnwkroutec.cc itfIPParametersChanged() called passing an interface, which is not involved in the route! 1

670929 54023 mr mrnwkpbxnodec.cc Internal error in MrNwkPBXNodeC::addInterface(), see param 1 for location. 3

672510 54024 mr mrnwkmediarouterc.cc Wrong configuration, not all interfaces of the PBX node access the same BWCA. 1

702143 54025 mr mrnwkroutec.cc The T.38 re-invite has been rejected. P1: value 0 = SIP Subscriber P2: MSN P1: value 1 = SIP Provider P2: Provider Id 1

702144 54026 mr mrnwkroutec.cc Lack of FoIP resources. P1: Node Id P2: Number of FoIP Channels 1

703157 54027 mr mrnwkroutec.cc Invalid reservation type. 1

712701 54028 mr iasipuasession.cc Couldn't retrieve video lines from the media router 1

719559 54029 mr mrallasynchfacade.cc Timed out while waiting for response from MR. 1

726851 54030 mr mrnwkipinterfacec.cc The resource administration of a Mindspeed module got corrupted due to a codec update! param1: portRef, param2: newCodec, param3: oldCodec 1

726853 54031 mr mrnwkipinterfacec.cc Mindspeed resource adm: Unexpected codec type! 1

738410 54032 mr mrnwkmanprocc.cc MrNwkProc received a BoardInService signal with invalid boardType - param1: nodeId, param2: slotId, param3: boardType 1

738411 54033 mr mrnwkmanprocc.cc MrNwkProc received a BoardOutOfService signal with invalid boardType - param1: nodeId, param2: slotId, param3: boardType 1

741937 54034 mr mrnwkwanlinkc.cc Not enough free bandwidth in MrNwkWANLinkC::reseveCapacity()! 1

744522 54035 mr mrnwkroutec.cc Unexpected NULL pointer! 1

748426 54036 mr mrnwkcallside.cc ref: br49545 Unexpected NULL pointer! Param1: call side bcsRef Param2: peerSideP Param3: peer side bcsRef 2

748895 54037 mr mrnwkcodeclicenseadmc.cc ALARM, Insufficient number of codec licences param 1: number of available codec licenses 1

748896 54038 mr mrnwkcodeclicenseadmc.cc COUNTERALARM, Sufficient number of codec licences available again param 1: max number of codec licenses 1

749397 54039 mr mrnwkcodeclicensestatisticc.cc could not create directory to store the codec licensing statistic files p1: errno p2: 1 - /home/logs could not be created 2 - /home/logs/statistic could not be created 3 - 1

749398 54040 mr mrnwkcodeclicensestatisticc.cc Couldn't open file "/home/logs/statistic/codeclicensing/codec_licensing_YYYYMMDD.txt" for writing 1

750674 54041 mr mrnwkipterminalc.cc External SIP node is neither provider nor remote node! Probably the XaBundle object in the database is not configured correctly. Check: SIP ProviderId and SIP RemoteNodeId in 1

752772 54042 mr mrnwkcallside.cc A codec license shall be reused for a callside that has already allocated a codec license. 1

766121 54043 mr mrnwkipslotc.cc ERROR, the instance is not in the heap. This is an invalid pointer. param1: this (MrNwkPbxSlotC) param2: i->first (routeP) param3: i->second (pbxcallsideP) 1

767255 54044 mr mrnwkipinterfacec.cc MrNwkRTPSwitchC::reconfigureRTPSwitch(): Unexpected portRef! param1: old PortRef param2: new PorRef 1

783596 54045 mr mrnwkipinterfacec.cc MrNwkMindspeedC::getFreeSlot(): chId (param3) too high: unable to create a new slot! 1

791502 54046 mr mrnwkmediarouterc.cc No free context Ids available Param1 = new Context ID allocated by MR. param2 = source BcsRef param3 = destination BcsRef 1

791503 54047 mr mrnwkmediarouterc.cc No free routeIds available. Param1 = new allocated routeId Param2 = source bcsRef param3 = destination bcsRef 3

791504 54048 mr mrnwkcallside.cc Media negotiation failed during re-activating media when the hold attempt from a terminal was rejected. Param1 - PBX call side bcsRef Param2 - Peer call side bcsRef param3 - 3

652007 56001 rm rmcaldectmanagerc.cc Free switch object was called for a DECT that had no entry in the switch object info list. 1

652742 56002 rm rmcalcallc.cc A call from or to an IP phone has been switched without using an IP media route. This call will be cleared. This usually happens when an office suite or OIP toolbox is trying to use a 2

653394 56003 rm rmcaldectmanagerc.cc There is something wrong with RM's DECT switch object info list. There are probably hanging bch-so pairs. 1

658475 56004 rm rmcaldectmanagerc.cc A dect bchannel assign signal has been received by RM. The handset it applies to has already been defined in RM by a previous signal. Has DP mistakenly repeated the signal or is 1

658478 56005 rm rmcaldectmanagerc.cc A hanging instance of SoInfo has been deleted. 1

658646 56006 rm rmcaldectmanagerc.cc A hanging instance of dect BchInfo has been deleted. 1

664232 56007 rm rmallmainc.cc A system base portref for a calling dect handset could not be found. This call must be rejected. This was an attempted dect to dect call. Parameter 1: Bcsref of the calling party 1

664233 56008 rm rmallmainc.cc A system base portref for a calling dect handset could not be found. This call must be rejected. This was an attempted dect to non dect call. Parameter 1: Bcsref of the calling party 1

664282 56009 rm rmcaldectmanagerc.cc There was a problem deleting a dect switch object. 1. objId 2. PortRef, 3. Channel. 1

664283 56010 rm rmcaldectmanagerc.cc No entry was found in the bch-info list during adding handover info. 1. HsId 2. New portRef 3. New channel. 1

664284 56011 rm rmcaldectmanagerc.cc No entry was found in the bch-info list during do handover. 1. HsId 2. New portRef 3. New channel. 1

664781 56012 rm rmcaldectmanagerc.cc An instance of RmCalDectBchInfo could not be found for removeBchannelInfo with the given handsetId. 1st parameter is the handsetId. 1

665346 56013 rm rmcalipswitcherc.cc An attempt has been made to remove an audio player master from an announcement connection. This means that Vc Csy has a problem. ConnId ObjId PortRef 1

665350 56014 rm rmcalipswitcherc.cc An attempt has been made to remove the master from an announcement connection but no new master was found by asking Xa. ConnId ObjId PortRef 1

665351 56015 rm rmcalipswitcherc.cc An attempt has been made to remove the master from a connection but no new master was found by asking Xa. ConnId ObjId PortRef 1

667335 56016 rm rmcalroutemanagerc.cc When moving a tone reservation to ERC SIP, an ERC SIP reservation was already present. This could be a hanger or collision. Param1: Hangers portref Param2: Hangers channel 1

667336 56017 rm rmcalroutemanagerc.cc When allocating a reservation to ERC SIP, a reservation was already present. This is a hanger or collision. Param1: Hanger portref Param2: Hanger channel 2

667384 56018 rm rmreslicencemanagerc.cc Calling new to allocate a new instance of a G.729 object has failed. Param 1: CallId Param 2: NodeId 1

667505 56019 rm rmcalcallmanagerc.cc An invalid callId was used in the call manager. Param1: The error logs sub number. 1

668389 56020 rm rmcalreservationc.cc The origin and destination portrefs for a reservation are the same. 1

668940 56021 rm rmcalcallc.cc getFirstReservation returned a NULL pointer. This means that this call has no reservations -> this is not allowed. 1

669744 56022 rm rmoccbiocontrollerc.cc PSTN Overflow: An empty breakinNum has been received from XA while attempting a breakout. This call will be cleared. 1

671319 56023 rm rmresnodec.cc An incorrect number of SPI channels was reported to the Resource Manager. Therefore a maximum of 2 voicemail channels has been configured. Parameter 1: The reported 1

672527 56024 rm rmcaldtmfmanagerc.cc findDtmfJob has been fed with invalid parameters 1

672542 56025 rm rmcaldectmanagerc.cc A share switch object command has been received for a handsetId with no entry in the switch object info list. 1. Existing bcsRef 2. Share bcsRef 1

672914 56026 rm rmcaldectmanagerc.cc Allocate switch object for a dect failed because there was a hanging switch object. The hanger will be deleted and a new one allocated. 1

680075 56027 rm rmcaldectmanagerc.cc XA has tried to share a switch object that has a swiobj info but no switch object in CR, probably because there is no DP info. We'll cleanup and return an error to XA. Param 1 is the 1

680488 56028 rm rmcaldectmanagerc.cc The information in an RBC desassign message does not match that in RM's lists. RM will be corrected to use the RBC information. There are several variants of this error report, see 1

680491 56029 rm rmcaldectmanagerc.cc A deassign has been received from the RBC for a handsetId that is not in the BchInfo list. 1

680512 56030 rm rmcalroutemanagerc.cc RM was can't find an ethernet port on the given node (node Id is parameter 1). Not logged in Handset can raise this errorlog. But may be others. 3

681250 56031 rm rmcalroutemanagerc.cc Undef nodeId for getNodeEthernetPortRef. Param 1: NodeId 1

681251 56032 rm rmcalroutemanagerc.cc Context Id could not be allocated. Context Id pool will be reset and all contexts cleared. 1

681482 56033 rm rmallmainc.cc An undef port reference was returned while trying to route a call to a DECT. Param 1: The nodeId of the DECT Param 2: The handsetId of the DECT 1

687953 56034 rm rmcalipswitcherc.cc No remaining partner reservation has been found when removing the other partner from a three party conference. Param 1: MasterBcsRef (callId) Param 2: BcsRef being 1

688613 56035 rm rmallmainc.cc A get details request to MR for a given sip routeId failed. Param 1: The routeId involved. Param 2: The request type: 1 (connection) or 2 (tone). 1

699070 56036 rm rmcaldtmfmanagerc.cc

No robust dtmf receivers for GSM integration are available on the node. Xa might try to continue the call with a normal dtmf receiver in which case no extended functionality will

be available. Param 1: nodeId where no resources are available. Param 2: The bcsref of the party that experienced this. 1

699165 56037 rm rmcalcallmanagerc.cc RM could not find a call with the given connectionId to clear. Param 1: Connection Id 1

723950 56038 rm rmcalcallmanagerc.cc Muting/Unmuting of intruder failed p1: Intruder CallId p2: Intruded CallId: p3: mute 1

738885 56039 rm rm/rmallbcsrefadmasynchfacadec.cc Problem in rm bcsref administration Reserve or unreserve failed 1

745328 56040 rm rmcalcallmanagerc.cc There happened a problem with the direct/indirect switching for call recording. param1: callId param2: call recording portref param3: location 1

749849 56041 rm rmbchchannelc.cc Invalid BcsRef parameter for multiline SIP B-channel. 1

750185 56042 rm RmAllLocalAsynchFacadeC Multi-Frequency receiver request failed. param1 = 0 // alloc request param2 - param3 = 0 -> allocate request to Rm timeout = 1 -> no Multi-frequency detector available 9

759072 56043 rm rmbchchannelc.cc There is no bcsRef anymore but still an active line. param1: myChTermId param2: myNrOfUsedLines param3: myChBcsref 1

762875 56044 rm rmcaldectmanagerc.cc The handset Id received from XA is not valid. This might be a collision and XA has already deleted its switch object. param1: objId param2: portRef param3: channel -> (channel-1) 1

767269 56045 rm rmbchserver.cc Function discCallAndClearChan: is called for a valid bcsref, because the channels of trunk have been release somehow. The call is disconnected. 1

771850 56046 rm rmallbcsrefadmasynchfacadec.cc Timeout for receiveSigTmo() expired. param1: 0 param2: calling pid param3: location in file 2

776766 56047 rm rmcsycourtesymanagerc.cc There is already a CsyMoH instance for this portref/channel. param1: Upper 16 bits -> Bcsref of the CsyMoH instance Lower 16 bits -> New Bcsref param2: PortRef param3: 1

776858 56048 rm rmresstatisticc.cc could not create directory to store the resource statistic files p1: errno p2: 1 - /home/logs could not be created 2 - /home/logs/statistic could not be created 3 - 1

780200 56049 rm rmcsycourtesymanagerc.cc This should never happen as this method has been called before. param1: bcsref param2: portref param3: channel 1

780615 56050 rm rmbchportc.cc Invalid msn for Multiline terminal received, can not update number of lines. param1: termId (ArTermIdC) param2: portRef (SmPortReferenceC) param3: msn (XaMSNTypeC) 1

790443 56051 rm rmlocasynchfacade.cc Timeout while waiting for a response signal from the Location Service. Param1: location/method Param2: invoking client procId. 1

790965 56052 rm rmlocemergencycall.cc Public emergency call initiated. p1: The first 4 digits of the dialled emergency number p2: User ID of the caller p3: Terminal ID of the caller 1

790966 56053 rm rmlocemergencycall.cc Public emergency call terminated. p1: The first 4 digits of the dialled emergency number p2: User ID of the caller p3: Terminal ID of the caller 1

791672 56054 rm rmloclocationserver.cc Unexpected device subtype in RmLocLocationServerC::determineEndpointType() param1: callingTermId param2: xaDevSubtype 1

791673 56055 rm rmlocemergencycall.cc Couldn't find DB instance for locationId param1: locationId 1

791674 56056 rm rmlocemergencycall.cc Rule chain is missing! 1

791675 56057 rm rmloclocationserver.cc Call already exists in handleSetLocationInfoForEmergencyCallReq() param1: callingBcsRef 1

660523 58001 vc vccmisessionmanagerc.cc Trying to search for an invalid vcBcsRef in the session list. 1

660524 58002 vc vccmisessionc.cc Unknown timeout type 1

660563 58003 vc vccmisessionmanagerc.cc Unexpected sender for this signal 1

660564 58004 vc vccmisessionmanagerc.cc Unknown Signal Minor for MajorVoice 1

660698 58005 vc vccmisessionmanagerc.cc Not able to find appropriate voice call session for the received command. Param 1: minor 2

660699 58006 vc vccmisessionmanagerc.cc Unknown Signal Minor for MajorResource 1

660851 58007 vc vcsrvservicec.cc Undefined service - Can't handle this command. 2

660858 58008 vc vcsrvservice...c.cc Unknown timeout signal for this service. Param 1: minor Param 2: service 3

661225 58009 vc vccmisessionc.cc Can't start session without voice service. 1

661226 58010 vc vccmisessionc.cc No voice service available to handle requested command. 1

661227 58011 vc vcrmsignalbridgec.cc Vc Record Text Request: No reply from Rm. 1

661228 58012 vc vcrmsignalbridgec.cc Vc Play Text Request: No reply from Rm. 1

661229 58013 vc vcrmsignalbridgec.cc Vc Start Tone Request: No reply from Rm. 1

661230 58014 vc vcrmsignalbridgec.cc Vc Stop Tone Request: No reply from Rm. 1

661234 58015 vc vccmicommandc.cc Allocation of voice control bcs reference failed. 2

661445 58016 vc vccmisessionc.cc No voice service to handle signal. 1

661449 58017 vc vcsrvservicec.cc Undefined service - can't access this attribute. 1

661604 58018 vc vccmisessionmanagerc.cc Unknown signal minor for MajorVm 1

661823 58019 vc vccmi...cmd.cc Unknown command response. 1

662123 58020 vc vcalllib.cc One of the parameters passed to VcAllComposeFilename was invalid. The parameters are given in the error report: Param1 : mboxId (16 bits); textId (16 bits) Param2 : scope 1

662181 58021 vc vccmisessionmanagerc.cc Trying to copy or assign session manager object! 1

662347 58022 vc vccsyconconnectionc.cc VcCsyConConnectionC::deallocateSwitchObj got failed from RM. However Connection is anyway being shut down. 2

662348 58023 vc vccsyconcourtesy.cc VcCsyConCourtesyC::startConnection: Adding an additional trunk to a courtesy announcement failed (from RM) 1

662349 58024 vc vccsyconcourtesy.cc VcCsyConCourtesyC::startConnection: B-Channel allocation failed, but selectBCh returned a free one. 1

662350 58025 vc vccsyconcoourtesy.cc VcCsyConCourtesyC::startConnection: bcsref allocation failed even if there should be a few left. 1

662351 58026 vc vccsyconcourtesy.cc VcCsyConCourtesyC::startConnection: not actually an error but we are running so low on bcsrefs that we can't start this courtesy announcement. Is there so much traffic or are 1

662352 58027 vc vccsyconcourtesy.cc VcCsyConCourtesyC::startConnection: There is no filename in the Database for this courtesy text. 1

662353 58028 vc vccsyconcourtesy.cc vcCsyConCourtesyC::startConnection: there is no instance for this courtesy in the database. So can't really start courtesy in this case. 1

662354 58029 vc vccsyconcourtesy.cc VcCsyConCourtesyC::removeFromConnection: can't remove it as it isn't part of this connection. 1

662355 58030 vc vccsyconcourtesy.cc VcCsyConCourtesyC::startConnection: couldn't start AudioPlayer after all alloction went well. So free all again and hope the next time it will work better. 2

662356 58031 vc vccsycontonec.cc VcCsyConToneC::startConnection: start tone to a trunk failed 1

662357 58032 vc vccsytonec.cc VcCsyConToneC::startConnection: startConnection, but already connected, substate not normal 1

662358 58033 vc vccsycontonec.cc VcCsyConToneC::startConnection: unknnown state 1

662359 58034 vc vccsycontonec.cc VcCsyConToneC::stopConnection: couldn't stop a tone to a trunk 1

662360 58035 vc vccsycontonec.cc VcCsyConToneC::removeFromConnection: couldn't stop tone 1

662361 58036 vc vccsygroupc.cc VcCsyGroupC::add: caller is already in the list 1

662362 58037 vc vccsygroupc.cc VcCsyGroupC::remove caller is not in the list 1

662363 58038 vc vccsymgrc.cc VcCsyMgrC::startCourtesy: invalid parameters 1

662365 58039 vc vccsymgrc.cc VcCsyMgrC::timeoutConMsgTextPlayed: dynamic cast failed 1

662366 58040 vc vccsymgrc.cc VcCsyMgrC::startConnections: list handling problem 1

662500 58041 vc vccsyconconnectionc.cc illegal filename for courtesyfile. The filename shouldn't start with 'used.'. This would cause endless renameing. 2

662575 58042 vc vcrmsignalbridgec.cc Vc Record Text Request: Rm returned an Error. 1

662577 58043 vc vcrmsignalbridgec.cc Vc Play Text Request: Rm returned an error. 1

662578 58044 vc vcrmsignalbridgec.cc Vc Start tone Request: Rm returned an error. 1

662579 58045 vc vcrmsignalbridgec.cc Vc Stop tone Request: Rm returned an error. 1

662586 58046 vc vcsrvserviceplaybackc.cc This service does not handle any timeout signals. 1

662588 58047 vc vcsrvserviceplayvoicemailc.cc Didn't find the message with the specified id. 1

662589 58048 vc vcsrvservicerecordc.cc Should not receive "Playing Complete" in this service. 1

662590 58049 vc vcsrvservicevoicemailc.cc Didn't find the specified greeting. 1

662592 58050 vc vcsrvservicevoicemailc.cc Couldn't create a new message. 1

662593 58051 vc vcsrvservicec.cc Didn't find the specified mailbox. 1

662613 58052 vc vcalllib.cc The specified mailbox does not exist. Parameters: 1. mailbox-id passed to the function 2. command (1 for activate and 2 for deactivate) 3. unused 1

662614 58053 vc vcalllib.cc The mailbox is not of the correct type (i.e. integrated) to allow the requested operation to be performed. Parameters: 1. mailbox-id passed to the function 2. command (1 for 1

662753 58054 vc vccmirecordcmdc.cc Invalid value of a parameter. Should never happen, as parameters are checked before this point. Parameters to error: 1. text type 2. scope 3. text id 1

662851 58055 vc vcsrvserviceplayvoicemailc.cc There is already a voice message playlist assigned to the service. Can't replace it to avoid memory leak! 1

662852 58056 vc vccmisessionc.cc No voice command to handle "PlayFurtherMessage" signal. 1

662855 58057 vc vccmiplayvoicemailcmdc.cc A playlist for this command already exists. 2

662856 58058 vc vcsrvserviceplayvoicemailc.cc Couldn't find a previous file name. 1

663042 58059 vc vcsrvservicerecordc.cc Unable to activate the recorded greeting. Parameters: 1. myTextType 2. myScope 3. myTextId (Also generated in vcfsafilemgrc.cc for exactly the same reason) 2

663049 58060 vc vcsrvservicec.cc Tried to access a personal mailbox with incorrect types Parameters: 1. myTextType 2. myScope 1

663051 58061 vc vcsrvservicerecordc.cc Can't find or create a text filename for a personal greeting. Parameters: 1. mailbox Id 2. TextType 3. TextId 1

663054 58062 vc vcsrvservice*.cc Service is not in the appropriate state. Parameters: 1. current state 2. expected state 1

663055 58063 vc vcsrvservice*.cc At least one of the parameters the service needs is invalid. Parameters: 1. mailboxId 2. scope + textType 3. textId 1

663096 58064 vc vcalllib.cc Couldn't delete a file in the file system. 2

663109 58065 vc vcsrvserviceplay*c.cc Couldn't compose/find a file name. Parameters: 1. mailbox id and text Id 2. scope 3. texttype 2

663121 58066 vc vccmigetmsgcmdc.cc Problem with the linking of messages in the database! Parameters: 1. mailbox id 2. message id that couldn't be found 1

663157 58067 vc vcsrvserviceplayvoicemailc.cc The active element in the playlist does not correspond to the text id being deleted. 1

663159 58068 vc vcsrvservicecplayvocemailc.cc Didn't find an active element to delete in the playlist. 1

663310 58069 vc vcsrvserviceplayvoicemailc.cc This is not the first message in the mailbox so it should have a previous message id. 1

663430 58070 vc vcsrvservicerecordc.cc Didn't find a mailbox number for the integrated AVS mailbox. 1

663436 58071 vc vcalllib.cc Can't find the node for a given (personal) mailbox. 1st Parameter: mboxId 1

663441 58072 vc vccmideletecmdc.cc This isn't a voicemail message, although it should be! 1

663536 58073 vc vcsrvserviceplayvoicemailc.cc Can't read the status of a message. It should be a message and it should be present. Parameters: 1 textId; 2 mailboxId 1

663579 58074 vc vcsrvservicevoicemailc.cc Invalid or unknown state. 1

663679 58075 vc vcsrvservicevoicemailc.cc In recordingAllowed an invalid value was found. Parameters: 1. myMboxId; 2. myScope; 3. myTextId 1

663698 58076 vc vcsrvserviceplayvoicemailc.cc Couldn't find an avs mailbox number. 1

663704 58077 vc vcsrvserviceplayvoicemailc.cc Couldn't find a file name. 2

663710 58078 vc vccmiavscmdc.cc Avs command "New Message" - Invalid date/time. 1

664173 58079 vc vcsrvservicec.cc Didn't find the specified greeting. 1

664174 58080 vc vcsrvservicec.cc Greeting recording time exceeded limit. Set greeting duration to configured max. Param1: mboxId/greetNr Param2: duration (value [s] which exceeded the limit) Param3: 3

664175 58081 vc vcsrvservicec.cc Didn't find the specified message. 1

664176 58082 vc vcsrvservicec.cc Error in recording time calculation. 2

664476 58083 vc vcallstatisticc.cc unknown enum value used 1

664812 58084 vc vccsyfilemgrc.cc FileSystemManager error Rename,Delete or getDir failed 1

664813 58085 vc vccsyfilemgrc.cc File not found in FileList 1

664814 58086 vc vccsyfilemgrc.cc Command Id Pool ru out of Ids. Is there somewhere a leak? 1

665453 58087 vc vcsrvserviceplayvoicemailc.cc Invalid state. 1

665618 58088 vc vccmiavscmdc.cc Received "MessageListened" from AVS and finding/creating the appropriate AVS message object in Vc failed. AVS voice mail may now contain more messages than we are aware 1

665619 58089 vc vccmiavscmdc.cc Received "NewMessage" from AVS and finding/creating the appropriate AVS message object in Vc failed. AVS voice mail may now contain more messages than we are aware of! 1

665620 58090 vc vcsrvservicevoicemailc.cc There was a problem in appending the message to the mailbox. There may be more messages in the file system/AVS voice mail module than Vc is aware of! 1

665623 58091 vc vccmiavscmdc.cc No previous message id found! This is not the first message in the mailbox so it should have a previous message id. 1

665689 58092 vc vccmicommandc.cc Should not receive this signal here! Can not handle delete confirmation wait timeout. 1

665752 58093 vc vccmideletecmdc.cc No delete confirmation from file system/avs module. 1

665775 58094 vc vcsrvserviceplayvoicemailc.cc No delete confirmation from file system/avs module. 1

665776 58095 vc vcsrvserviceplayvoicemailc.cc Text id in service differs from text id received by 'message deleted' signal. 1

665782 58096 vc vcallmainc.cc something went wrong while creating DB instance for new AIN node. 1

665828 58097 vc vcfsafilemgrc.cc Unexpected / unknown signal or parameter in the signal. Parameters: 1. minor (major is always MajorFm) 2. unexpected parameter (or 0 if the whole signal is 2

665846 58098 vc vcfssignalbridgec.cc Can't send the requested signal. Parameters: 1. minor of the signal that could not be sent (major is always MajorFm) 2. some other information - look at code! 1

665903 58099 vc vccmisessionc.cc Should not have session without service or command. 1

665905 58100 vc vccmicommandc.cc Can not handle delete confirmation signal. 2

665940 58101 vc vccmideletecmdc.cc Can't convert greeting number into audio record. 1

665951 58102 vc vccmicommandc.cc FmDeleteReply or AvsMessageDeleted received in wrong command 1

666026 58103 vc vcsrvservice*.cc Can't find filename to play a global greeting or courtesy. Was found earlier (in cmi). Parameters: 1. node id 2. text type 3. greeting number 2

666027 58104 vc vcsrvservice*.cc Can't find the filename when stopping playing a global greeting or courtesy text. Parameters: 1. node id 2. text type 3. greeting number 1

666057 58105 vc vcsrvservice*.cc Global greeting is in an unexpected state. Parameters: 1. node id 2. text type (upper 16 bits) and greeting number 3. state (as received from courtesy file manager) 1

666088 58106 vc vccmivoicemailcmdc.cc Can't find a greeting to play or greeting is currently being recorded. Parameters: 1. mailbox id and node id 2. scope and greeting number 3. 0 for now [should be file state (as 3

666153 58107 vc vcfsafilemgrc.cc Unallowed action in vm directory. Parameters: 1. operation (from FmNotificationEnu) 2. nodeId (first 8 bits) 2. (24 bits) and 3. first 7 characters of file name (without directory) 1

666226 58108 vc vcfsafilemgrc.cc Notification from filesystem manager. Filename looks like mailbox and text, but isn't. Parameters: 1. node id 2. text type 3. mailbox and text ids 2

666447 58109 vc vccmicommandc.cc In checkGlobalPermission: unexpected response from ACM. Parameters: 1. subscriber id 2. return value 1

666642 58110 vc vccmideletecmdc.cc Didn't find the specified mailbox - not able to delete. 1

666661 58111 vc vccmideletecmdc.cc Deleting files of a removed mailbox failed. 1

666683 58112 vc vccmi*.cc Couldn't find nodeId for this mailbox or subscriber. Parameters: 1. subscriber id 2. scope (personal or global) 3. mailbox id or 0 if scope is global 2

666867 58113 vc vcsrvserviceplayvoicemailc.cc No response from AVS to "stop playing" command. 2

666896 58114 vc vcsrvservicec.cc Did not expect this signal in this service. 1

667243 58115 vc vccsymgrc.cc No connectionId found (may be a collision) (br31021) 1

667469 58116 vc vcfsanodemgrc.cc Trying to copy or assign node manager object - not allowed! (and won't work) 1

667476 58117 vc vcfsanodemgrc.cc Didn't find node in our list. Parameters: 1. nodeId 1

667482 58118 vc vcfsanodec.cc This type of subscription is not supported. Parameters: 1. The requested type (from arsigfm/FmSubscriptionEnu) 2. The value, if we are trying to write it (else 0) 2

667503 58119 vc vcfsanodemgrc.cc Can't add new node to list. Parameters: 1. nodeId 1

667504 58120 vc vcfsanodemgrc.cc No instance pointer for the FsaNodeMgr. This is serious as it means, for some reason, we haven't started the Master node correctly! Currently no parameters. 2

667554 58121 vc vcsrvservicevoicemailc.cc Message too short - deletion of file in FS failed! 1

667777 58122 vc vccmiavscmdc.cc Invalid or unknown return value for VcEclAvsMailBoxC::checkAppendAvsMessage(). Param 1: appendResult Param 2: mboxId Param 3: avsMsgId 1

667790 58123 vc vcecl*.* Invalid message id. 1

668293 58124 vc vceclavsmailboxc.cc Trying to link message to itself creating a circular reference! Param1: mboxId Param2: avsMsgId 2

668294 58125 vc vceclintmailboxc.cc Trying to link message to itself creating a circular reference! 1

668295 58126 vc vcsrvservicevoicemailc.cc Trying to link message to itself creating a circular reference! 1

668302 58127 vc vceclintmailboxc.cc Corrupted mailbox - The message which is stored as first message in the mailbox does not exist. Param1: mboxId Param2: msgId (of message which does not exist) 1

668307 58128 vc vceclintmailboxc.cc No messages in mailbox - Set first message id to 'Undef'. Param1: mboxId Param2: msgId (of the first message in the mailbox which does not exist and therefore was set to 1

668314 58129 vc vceclintmailboxc.cc Found first message of mailbox - Replaced first message Id of mailbox. Param1: mboxId Param2: msgId (of message which does not exist) Param3: newMsgId (which replaced 1

668315 58130 vc vceclintmailboxc.cc Didn't find first message of mailbox - Set first message Id to 'Undef'. Attention there may be messages in this mailbox which are no longer referenced now!!! Param1: mboxId 1

668342 58131 vc vcsrvservicec.cc Message recording time exceeded limit. Set message duration to configured max. Param1: mboxId/msgId Param2: duration (value [s] which exceeded the limit) Param3: 3

668415 58132 vc vceclintmailboxc.cc Deleted message with undefined length. Param1: mboxId Param2: msgId (of deleted message) 2

668417 58133 vc vceclintmailboxc.cc Deleted greeting with undefined length. Param1: mboxId Param2: greetNr (of deleted greeting) Param3 audioRecId (of deleted greeting) 1

668600 58134 vc vceclavsmailboxc.cc Trying to set status for invalid avs greeting. Param1: mboxId Param2: greetNr Param3: status 2

668807 58135 vc vceclavsmailboxc.cc Trying to get status of invalid AVS greeting. Param1: mboxId Param2: greetingNr 3

668833 58136 vc vceclavsmailboxc.cc AVS mailbox - Circular reference in linked list of messages. Param 1: mboxId Param 2: msgId of the msg object causing the circular reference Param 3: msgId pointed to by the 1

668834 58137 vc vceclintmailboxc.cc Embedded mailbox - Circular reference in linked list of messages. Param 1: mboxId Param 2: msgId of the msg object causing the circular reference Param 3: msgId pointed to by 1

668872 58138 vc vccmigetmsgcmdc.cc More than 100 messages in mailbox!? Might be a circular reference in the message queue. Param 1: mboxId 3

668966 58139 vc vceclavsmailboxc.cc Not able to re-link the message objects in the mailbox. Object still in db although file might be deleted. Param 1: mboxId Param 2: avsMsgId 1

668967 58140 vc vceclintmailboxc.cc Not able to re-link the message objects in the mailbox. Object still in db although file might be deleted. Param1: mboxId Param2: msgId 1

669127 58141 vc vceclavsmailboxc.cc Trying to delete a message which does not belong to this mailbox. Param 1: mboxId Param 2: avsMsgId 2

669128 58142 vc vceclintmailboxc.cc Trying to delete a message which does not belong to this mailbox. Param 1: mboxId Param 2: msgId 1

670428 58143 vc vcallmainc.cc Can't create one of the voice directories 1

670853 58144 vc vccmisessionmanagerc, Deleting file failed. Param1: mboxId Param2: textId Param3: fsErrorNo 4

672329 58145 vc vceclintmailboxc.cc Embedded mailbox - No previous messge to link to. Param1: mboxId Param2: msg id of the previous message which is not available Param3: msg id of the next message which 1

672331 58146 vc vceclavsmailboxc.cc AVS mailbox - No previous message to link to. Param1: mboxId Param2: id of previous message which is not available. Param3: id of next message which should be linked to the 1

672351 58147 vc vceclintmailboxc.cc Embedded mailbox - Integrity check failed (excessive loops in check routine)! There must be a circular reference in the list of linked messages. 1

672352 58148 vc vceclavsmailboxc.cc AVS mailbox - Integrity check failed (excessive loops in check routine)! There must be a circular reference in the list of linked messages. 1

672413 58149 vc vcsrvautoattendantc.cc Auto Attendant: Didn't find the active global greeting. Param1: nodeId Param2: mboxId Param3: state of voicemail service 3

672414 58150 vc vcsrvautoattendantc.cc Auto Attendant: Didn't find the active personal greeting. Param1: mboxId Param2: greetingNr Param3: state of voicemail service 2

672415 58151 vc vcsrvautoattendantc.cc Auto Attendant: Not able to find the active greeting. Param1: mboxId Param2: greetingNr Param3: scope of greeting 2

672484 58152 vc vcsrvautoattendantc.cc Auto Attendant: Unknown action Param1: mboxId Param2: greetingNr Param3: trigger 1

672720 58153 vc vcsrvautoattendantc.cc Auto Attendant: Not able to find recall time - use default. Param1: nodeId Param2: mboxId Param3: state of voice service 2

672722 58154 vc vcsrvservicec.cc Voice mail service: Timer was cancelled because a new timer was started! Param1: minor of cancelled vc timer signal Param2: minor of new started vc timer signal 1

672781 58155 vc vcsrvservicevoicemailc.cc No auto attendant available in state "AutoAttendantWaitResponse". Param1: mboxId Param2: greetingNr Param3: scope 2

672867 58156 vc vcsrvautoattendantc.cc No auto attendant action defined or unknown action - Should have ignored the trigger. 2

672887 58157 vc vcsrvservicevoicemailc.cc Should not receive "connect" after "transfer to destination". Param 1: mboxId Param 2: greetNr 2

672896 58158 vc vcsrvservicevoicemailc.cc Service VoiceMail, AutoAttendant, execute "busy" action: Unknown return state. Param 1: mboxId Param 2: greetingNr Param 3: return state 1

672897 58159 vc vcsrvservicevoicemailc.cc Service VoiceMail, AutoAttendant, CallRejected: Should not get here without auto attendant. Param 1: mboxId Param 2: greetingNr 1

672898 58160 vc vcsrvservicevoicemailc.cc Service VoiceMail, AutoAttendant, execute "end of greeting" action: Unknown return state! Param 1: mboxId Param 2: greetingNr Param 3: return state 1

672899 58161 vc vcsrvservicevoicemailc.cc Service VoiceMail, AutoAttendant, execute "no reply" action: Unknown return state! Param1: mboxId Param2: greetingNr Param3: return state 1

672900 58162 vc vcsrvservicevoicemailc.cc Service VoiceMail, AutoAttendant, VoiceNoReplyTimeout: Should not get here without auto attendant! Param1: mboxId Param2: greetingNr 1

672919 58163 vc vcsrvautoattendantc.cc Auto Attendant: Should not get "noReply" trigger if no profile available. Param1: mboxId Param2: greetingNr 2

672921 58164 vc vcsrvautoattendant Auto Attendant: Should not get "busy" trigger if no profile available. Param1: mboxId Param2: greetingNr 1

672973 58165 vc vcsrvautoattendantc.cc Auto Attendant: Check destination string - unknown return value! Param1: mboxId Param2: greetingNr Param3: trigger 1

673190 58166 vc vcsrvservicevoicemailc.cc No auto attendant available to handle user selection. 1

680706 58167 vc vcsrvservicevoicemailc.cc Service VoiceMail, AutoAttendant, callRejected: Should not get this signal without auto attendant action for the given reject cause. Param 1: mboxId Param 2: greetingNr Param 2

680710 58168 vc vcsrvservicevoicemailc.cc Auto Attendant: Should not receive "connect" after "execute function". Parameter 1: mboxId Parameter 2: greetingNr 2

680885 58169 vc vccmisessionc.cc No valid "calling bcs ref" for this session. 1

681463 58170 vc vcsrvservicevoicemailc.cc Service Voicemail: Wrong state for updating partner parameters of SVM mailbox (call transfer). Param 1: state Param 2: mailboxId Param 3: vcBcsRef 2

681478 58171 vc vcsrvservicevoicemailc.cc Service Voicemail: Undefined or unknown state while updating partner parameters of a SVM mailbox (call transfer). Param 1: state Param 2: mailboxId Param 3: vcBcsRef 1

681490 58172 vc vcsrvservicevoicemailc.cc Service Voicemail - Call transfer: Should not allocate new buffer for partner parameters before od buffer is released. Param 1: mailboxId 1

682067 58173 vc vcsrvservicevoicemailc.cc Invalid voice mail service state to handle VoiceRmReqRetryTimeout. Param 1: state 3

682074 58174 vc vcsrvserviceplaybackc.cc Invalid playback service state to handle VoiceRmReqRetryTimeout. Param 1: state 1

682080 58175 vc vcsrvserviceplayvoicemailc.cc Invalid play voice mail service state to handle VoiceRmReqRetryTimeout. Param 1: state 2

687433 58176 vc vcsrvservicevoicemailc.cc Service Voicemail: Not possible to update partner params (call transfer) in this state. Param1: state Param2: mboxId Param3: vcBcsRef 1

687435 58177 vc vcsrvservicevoicemailc.cc Service Voicemail: Invalid state for updating partner parameters of AVS mailbox (call transfer). Param1: state Param2: mboxId Param3: vcBcsRef 1

689119 58178 vc vcsrvservicevoicemailc.cc Service VoiceMail/AutoAttendant - wrong state after playing greeting. Param1: mailbox id Param2: greeting nr Param3: state 1

689140 58179 vc vcsrvservicevoicemailc.cc Service VoiceMail/AutoAttendant: Should not get here without auto attendant. Param1: mailbox id Param2: greeting nr 1

689196 58180 vc vcsrvservicevoicemailc.cc Service VoiceMail/AutoAttendantDelay: No auto attendant action available. Param1: mailbox id Param2: greeting nr 1

690743 58181 vc vcfsanodec.cc Unexpected subscription id. Param 1: subscription id 1

692795 58182 vc vcfsafilemgrc.cc Renaming uploaded message failed. Param1: nodeId Param2: mboxId Param3: original messageId 2

692798 58183 vc vcfsafilemgrc.cc Could not append the renamed message to requested mailbox. Param1: mboxId Param2: messageId 2

692799 58184 vc vcfsafilemgrc.cc Triyng to link message to itself creating circular reference. Param1: mboxId Param2: textId 2

692805 58185 vc vcfsafilemgrc.cc Message was renamed incorrectly. Param1: mboxId Param2: oldTextId Param2: newTextId 2

694287 58186 vc vccmisessionmanagerc.cc Invalid Courtesy Group Param 1: Courtesy group id 1

697727 58187 vc vcalllib.cc No valid node to check node state for. Param 1: nodeId Param 2: command type to check node for 1

697729 58188 vc vceclintmailboxc.cc Didn't find the specified mailbox database object. Param 1: mboxId 1

697827 58189 vc vceclintmailboxc.cc Triyng to link message to itself creating circular reference. Param1: mboxId Param2: textId 1

697829 58190 vc vceclintmailboxc.cc Could not append message to this mailbox. Param1: mboxId Param2: messageId 1

697945 58191 vc vcsrvservicec.cc Service can not handle "Playing Complete" signal. 1

698313 58192 vc vcrmasynchproxyc.cc Vc Start Tone Request: No reply from Rm. 1

698314 58193 vc vcrmasynchproxyc.cc Vc Record Text Request: No reply from Rm. 1

698316 58194 vc vcrmasynchproxyc.cc Vc Record Text Request: Rm returned an Error. 1

698317 58195 vc vcrmasynchproxyc.cc Vc Record Text Request: Unknown reply from Rm. 1

698318 58196 vc vcrmasynchproxyc.cc Vc Play Text Request: Rm returned an error. 1

698319 58197 vc vcrmasynchproxyc.cc Vc Play Text Request: No reply from Rm. 1

698321 58198 vc vcrmasynchproxyc.cc Vc Play Text Request: Unknown reply from Rm. 1

698328 58199 vc vcrmasynchproxyc.cc Vc Start tone Request: Rm returned an error. 1

698329 58200 vc vcrmasynchproxyc.cc Vc Stop tone Request: Rm returned an error. 1

698330 58201 vc vcrmasynchproxyc.cc Vc Stop Tone Request: No reply from Rm. 1

698555 58202 vc vcsrvserviceplaybackavsc.cc Should not receive timeout signal in this service. Param 1: (VoiceMinorEnu)minor 1

698556 58203 vc vcsrvserviceplaybackavsc.cc Wrong state to handle signal. Param 1: actual state Param 2: expected state 1

698557 58204 vc vcsrvserviceplaybacksvmc.cc Wrong state to handle signal. Param 1: actual state Param 2: expected state 1

698558 58205 vc vcsrvserviceplaybacksvmc.cc Wrong playback service state to handle VoiceRmReqRetryTimeout. Param 1: actual state Param 2: expected state 1

698559 58206 vc vcsrvserviceplaybacksvmc.cc Unknown timeout signal for this service. Param 1: (VoiceMinorEnu)minor 1

698560 58207 vc vcsrvserviceplaybacksvmc.cc Couldn't compose/find a file name. Parameters: 1. mailbox id and text Id 2. scope 3. texttype 1

698561 58208 vc vcsrvserviceplaybacksvmc.cc Global greeting is in an unexpected state. Param 1: node id Param 2: text type (upper 16 bits) and greeting number Param 3: state (as received from courtesy file manager) 1

698562 58209 vc vcsrvserviceplaybacksvmc.cc Can't find filename to play a global greeting or courtesy. Was found earlier (in cmi). Parameters: 1. node id 2. text type 3. greeting number 1

698565 58210 vc vccimplaycmdc.cc Could not create playback service (this should never happen)! Allocated bcsRef might never be deallocated! Param 1: allocated bcsRef 2

698697 58211 vc vcsrvserviceplaybackc.cc Should not receive timeout signal in this service. Param 1: minor (VoiceMinorEnu) of the received signal 1

698700 58212 vc vcsrvserviceplaybackc.cc Wrong state to handle signal. Param 1: signal to handle Param 2: type (AVS or SVM) and state Param 3: expected state 1

698702 58213 vc vcsrvserviceplaybackc.cc Should call handler of derived class. Param 1: signal to handle Param 2: type (AVS or SVM) and state Param 3: minor (VoiceMinorEnu) (if available) 2

698960 58214 vc vccmiplayvoicemailcmdc.cc Could not create "Play Voicemail" service! Param 1: vcBcsRef 2

698965 58215 vc vccmirecordcmdc.cc Could not create "Record" service. Param 1: vcBcsRef 1

698967 58216 vc vccmivoicemailcmdc.cc Could not create "Voicemail" service. Param 1: vcBcsRef 1

698969 58217 vc vceclintmailboxc.cc Greeting recording time exceeded limit. Set greeting duration to configured max. Param1: mboxId/greetNr Param2: duration (value [s] which exceeded the limit) Param3: 1

698970 58218 vc vceclintmailboxc.cc Didn't find the specified greeting. Param 1: gretingNr Param 2: mboxId 1

698971 58219 vc vceclintmailboxc.cc Didn't find the specified mailbox. Param 1: mboxId 1

698972 58220 vc vcsrvservicerecordc.cc Should not recieve timeout signal in this service. Param 1: (VoiceMinorEnu)minor 1

698973 58221 vc vcsrvservicerecordc.cc Wrong state to handle signal. Param 1: received signal Param 2: Vm type (AVS or SVM) and state Param 3: expected state (if available) 2

698974 58222 vc vcsrvservicerecordc.cc Should call handler of derived class. Param 1: signal to handle Param 2: type (AVS or SVM) and state Param 3: (VoiceMinorEnu)minor (if available) 2

698983 58223 vc vcsrvservicevoicemailc.cc Could not create "Play Voicemail" service. Param 1: vcBcsRef Param 2: mboxId 1

698984 58224 vc vcsrvservicerecordavsc.cc Invalid scope! Param 1: mboxId Param 2: scope and textType Param 3: textId 1

698987 58225 vc vcsrvservicerecordsvmc.cc Wrong state to handle signal. Param 1: signal to handle Param 2: type (AVS or SVM) and state 2

698989 58226 vc vcsrvservicerecordsvmc.cc Unknown timer signal for this state. Param 1: (VoiceMinorEnu)minor Param 2: type (AVS or SVM) and state 2

698990 58227 vc vcsrvservicerecordsvmc.cc Not a personal greeting! Param 1: textType Param 2: scope 1

698992 58228 vc vcsrvservicerecordsvmc.cc Invalid scope! Param 1: mboxId Param 2: scope and textType Param 3: textId 2

699073 58229 vc vceclvoicemailboxc.cc Should not call method of base class! Override the method in the appropriate derived class. 1

699512 58230 vc vcallplaylistc.cc The active element from the playlist does not correspond to the text id being deleted. 1

699513 58231 vc vcallplaylistc.cc Didn't find an active element to delete in the playlist. 1

699514 58232 vc vcsrvserviceplayvoicemailavsc.cc Should not call this method for non-AVS service! 1

699516 58233 vc vcsrvserviceplayvoicemailavsc.cc Could not get message status (no valid message). Param 1: textId Param 2: mboxId 3

699517 58234 vc vcsrvserviceplayvoicemailavsc.cc Unknown state - state set to idle. Param 1: unknown state (VcSrvServicePlayVoicemailC::State) 2

699518 58235 vc vcsrvserviceplayvoicemailavsc.cc No response from AVS to "stop playing" command. Param 1: mboxId Param 2: textId 1

699527 58236 vc vcsrvserviceplayvoicemailc.cc Should call handler of derived class. Param 1: signal to handle Param 2: vmType and state 1

699529 58237 vc vcsrvserviceplayvoicemailsvmc.cc Unknown state - state set to idle. 1

699531 58238 vc vcsrvserviceplayvoicemailsvmc.cc Could not get message status (no valid message). Param 1: textId Param 2: mboxId 1

699532 58239 vc vcsrvserviceplayvoicemailsvmc.cc Invalid state to handle signal. Param 1: (VoiceMinorEnu) minor Param 2: vmType and state Param 3: expected state 1

699534 58240 vc vcsrvserviceplayvoicemailsvmc.cc Could not find a file name. Param 1: textId Param 2: mboxId 1

700766 58241 vc vcsrvservicevoicemailsvmc.cc Can't use this method whith services other than SVM! Param 1: mboxId 1

700767 58242 vc vcsrvservicevoicemailsvmc.cc Need to have an integrated mailbox for SVM services! Param 1: mboxId 1

700772 58243 vc vcsrvserviccevoicemailc.cc Should never get this signal for voice mail services other than SVM. Param 1: VcSrvServiceVoicemailC::Signal(signal) 2

700839 58244 vc vcsrvservicevoicemailsvmc.cc Signal is not handled in this state. Param 1: (VoiceMinorEnu)minor Param 2: state 1

700903 58245 vc vcsrvservicevoicemailavsc.cc Unknown timeout signal for AVS voice mail service. Param 1: VoiceMinorEnu(minor) 1

700973 58246 vc vcsrvservicevoicemailc.cc Wrong state to handle signal. Param 1: VcSrvServiceVoicemailC::Signal(signal) Param 2: Service type (AVS or SVM) and VcSrvServiceVoicemailC::State(state) Param 3: Expected 1

700974 58247 vc vcsrvservicevoicemailc.cc Should not call handler of base class. Param 1: VcSrvServiceVoicemailC::Signal(signal) Param 2: Service type (AVS or SVM) and VcSrvServiceVoicemailC::State(state) 1

700980 58248 vc vcsrvserviceplayvoicemailc.cc Unknown signal for play voicemail service. Param 1: VoiceMinorEnu(minor) 1

701005 58249 vc vcsrvservicevoiceamailavsc.cc Wrong state to handle signal. Param 1: mbox id + vcBcsRef Param 2: VoiceMinorEnu(signal) Param 3: VcSrvServiceVoicemailC::State(state) 3

701009 58250 vc vcsrvservicevoicemailavsc.cc Can't use this method with services other than AVS. Param 1: vcBcsRef Param 2: mbox id 1

701059 58251 vc vcsrvautoattendantc.cc Should not receive "Connect" after "transfer to destination"! Param1: vcBcsRef Param2: mboxId Param3: greetingNr 1

701060 58252 vc vcsrvautoattendantc.cc Should not receive "Connect" after "Execute function"! Param1: vcBcsRef Param2: mboxId Param3: greetingNr 1

701061 58253 vc vcsrvautoattendantc.cc No auto attendant action defined or unknown action - Should have ignored the trigger. Param1: vcBcsRef Param2: mboxId Param3: greetingNr 1

701062 58254 vc vcsrvautoattendantc.cc Auto Attendant - Invalid or unknown state. Param1: vcBcsRef Param2: mboxId Param3: greetingNr 1

701063 58255 vc vcsrvautoattendantc.cc AutoAttendant - Should not get "CallRejected" signal without auto attendant action for the given reject cause. Param 1: vcBcsRef Param 2: mboxId, greetingNr Param 3: reject 1

701066 58256 vc vcsrvautoattendantc.cc Execute "no reply" action: Unknown return state. Param 1: vcBcsRef Param 2: mboxId, greetingNr Param 3: VcSrvAutoAttendantC::State(state) 1

701067 58257 vc vcsrvautoattendantc.cc Execute "busy" action: Unknown return state. Param 1: vcBcsRef Param 2: mboxId, greetingNr Param 3: VcSrvAutoAttendantC::State(state) 1

701069 58258 vc vcsrvservicevoicemailsvmc.cc Should not get "CallRejected" signal without auto attendant. Param1: vcBcsRef Param2: mboxId, greetingNr Param3: reject cause 1

701302 58259 vc vcsrvautoattendantc.cc Execute "End of Greeting" action: Unknown return state. Param 1: vcBcsRef Param 2: mboxId, greetingNr Param 3: VcSrvAutoAttendantC::State(state) 1

701314 58260 vc vcsrvservicevoicemailsvmc.cc Unknown Timeout Signal. Param 1: vcBcsRef Param 2: mboxId, greetingNr Param 3: VoiceMinorEnu(minor) 1

701317 58261 vc vcsrvservicevoicemailsvmc.cc Message too short - deletion of file in filesystem failed. Param1: vcBcsRef Param2: mboxId Param3: textId 1

701319 58262 vc vcsrvservicevoicemailsvmc.cc In recordingAllowed an invalid value was found. Parameters: 1. mboxId; 2. scope; 3. greetingNr 2

701320 58263 vc vcsrvservicevoicemailsvmc.cc Call transfer: Should not allocate new buffer for partner parameters before old buffer is released. Param 1: callingBcsRef Param 2: mailboxId 2

701321 58264 vc vcsrvservicevoicemailsvmc.cc No delete confirmation from filesystem. Param1: vcBcsRef Param2: mboxId Param3: textId 1

701322 58265 vc vcsrvservicevoicemailsvmc.cc Wrong state to handle "Connect" signal. Param1: vcBcsRef Param2: mboxId, greetingNr Param3: state 3

701323 58266 vc vcsrvservicevoicemailsvmc.cc Wrong state to handle "PlayingComplete" signal. Param1: vcBcsRef Param2: mboxId, greetingNr Param3: state 2

701324 58267 vc vcsrvservicevoicemailsvmc.cc Invalid state to handle "Timeout" signal. Param1: vcBcsRef Param2: mboxId Param3: state, VoiceMinorEnu(minor) 2

701325 58268 vc vcsrvservicevoicemailsvmc.cc Invalid state to handle "UpdatePartner" signal. Param1: vcBcsRef, callingBcsRef Param2: mboxId Param3: state 1

701332 58269 vc vcsrvservicevoicemailsvmc.cc Method used with invalid service (dynamic cast failed). Param1: vcBcsRef Param2: mboxId Param3: state 1

701336 58270 vc vcsrvservicevoicemailsvmc.cc Could not create "PlayVoicemail" service. Param1: vcBcsRef Param2: mboxId 1

701337 58271 vc vcsrvservicevoicemailsvmc.cc No auto attendant action available. Param1: vcBcxRef Param2: mboxId Param2: greetingNr 1

701338 58272 vc vcsrvservicevoicemailsvmc.cc Couldn't create new message. Param1: vcBcsRef Param2: mboxId 1

706891 58273 vc vcsrvserviceplayvoicemailc.cc Finished playing an unknown system prompt. Param1: mboxId Param2: SysPromptEnu(systemPrompt) 1

710676 58274 vc vcfsanodemgrc.cc Couldn't read the state of "file system locked" flag in the database when Master starts up. No parameters. 1

712412 58275 vc vceclavsmailboxc.cc More than 1000 messages in mailbox!? Might be a circular reference in the message queue. Param 1: mboxId 1

712413 58276 vc vceclintmailboxc.cc More than 1000 messages in mailbox!? Might be a circular reference in the message queue. Param 1: mboxId 1

712414 58277 vc vceclintmailboxc.cc Problem with the linking of messages in the database! Parameters: 1. mailbox id 2. message id that couldn't be found 1

712415 58278 vc vceclintmailboxc.cc Activate/deactivate greeting: The specified mailbox does not exist. Parameters: 1. mailbox-id passed to the function 2. greetNr 3. 1 for activate and 0 for deactivate 4

712418 58279 vc vceclintmailboxc.cc This isn't a voicemail message, although it should be! Param1: mboxId Param2: msgId Param3: nodeId 1

712419 58280 vc vceclintmailboxc.cc Didn't find the message with the specified id. Param1: mboxId Param2: msgId 2

712427 58281 vc vceclintmailboxc.cc Can't convert greeting number to audio record id. Param1: mboxId Param2: greetNr 2

712430 58282 vc vceclintmailboxc.cc Message recording time exceeded limit. Set message duration to configured max. Param1: mboxId/msgId Param2: duration (value [s] which exceeded the limit) Param3: 1

712431 58283 vc vceclavsmailboxc.cc Mailbox does not exist. Param1: mboxId 2

712433 58284 vc vceclavsmailboxc.cc Couldn't find an avs mailbox number. Param1: mboxId Param3: identifies error location in file 2

712434 58285 vc vceclavsmailboxc.cc This is not the first message in the mailbox so it should have a previous message id. Param1: mboxId Param2: avsMsgId 2

713471 58286 vc vcallmainc.cc This instance of the VcAllMainC process is running on a satellite and does not expect to receive this signal. Param1: nodeId Param2: Major/Minor 1

713474 58287 vc vcallmainc.cc Received unexpected FmNotification. Param1: FmNotificationEnu Param2: nodeId (where the notification came from) Param3: last four characters of the file name 1

713828 58288 vc vcsrvserviceplayvoicemailsvmc.cc Audio Guide: No valid system prompt to play back. Param 1: mboxId 1

714091 58289 vc vcsrvserviceplaybackc.cc Should not call playText method of base class. 1

715697 58290 vc vcfsafilemgrc.cc Audio Guide: svmmode.txt file has been modified by an external process! 3

715698 58291 vc vcfsafilemgrc.cc Audio Guide: svmmode.txt file has been removed by an external process! 2

715699 58292 vc vcfsafilemgrc.cc Audio Guide: svmmode.txt file has been renamed by an external process! 2

717668 58293 vc vcalluploadhandlerc.cc Error happened while copying the wave file, so the file might be corrupt. Param1: how many blocks have been read successfully already. Param2: how many bytes have been 1

721769 58294 vc vceclintmailboxc.cc Invalid greeting number. Param 1: mboxId Param 2: greetingNr 1

721850 58295 vc vccmisessionmanagerc.cc Invalid Greeting Nr. Param 1: mboxId Param 2: greetNr 1

721851 58296 vc vccmisessionmanagerc.cc Invalid Number of Greetings! Param 1: mboxId Param 2: oldNbrOfGreetings Param 3: newNbrOfGreetings 1

721852 58297 vc vccmisessionmanagerc.cc Received an update signal for an integrated mailbox that does not exist! Param 1: mboxId Param 2: minor (of MajorVoice) 1

724371 58298 vc vcfsafilemgrc.cc Received unexpected file manager subscribe response. Param1: nodeId Param2: subscription type Param3: subscription id 1

725248 58299 vc vcntfmwilistc.cc Send MWI E-Mail is activated for a mailbox but no destination e-mail address configured for the mailbox owner. Param1: userId (mailbox owner) Param2: mboxId 1

725249 58300 vc vcntfmwilistc.cc Could not find mailbox owner! Param1: mboxId 1

725540 58301 vc vcntfmwilist.cc PBX in expanded voice mail mode (G729 only). Cannot attach files to VM MWI e-mail. Param1: mboxId 1

726083 58302 vc vcallbackuprestorehandlerc.cc VcAllBackupRestoreHandlerC - Unknown Request/Action Param 1: action (VoiceAudioEncryptionAction) 1

726942 58303 vc vcfsafilemgrc.cc Creating audio record for an uploaded personal greeting failed. Param1: nodeId Param2, Param3: first 8 characters of filename (excluding path) 1

726944 58304 vc vcfsafilemgrc.cc Creating audio record for an uploaded voice mail message failed. Param1: nodeId Param2, Param3: first 8 characters of filename (excluding path) 1

726945 58305 vc vcfsafilemgrc.cc An unknown file was created in the voicemail directory and has been deleted by the PBX. Param1: nodeId Param2, Param3: first 8 characters of filename (excluding path) 1

726947 58306 vc vcfsafilemgrc.cc A renamed message could not be appended to a mailbox and was deleted. Param1: nodeId Param2, Param3: first 8 characters of filename (excluding path) 1

726948 58307 vc vcfsafilemgrc.cc A message has been deleted because it was renamed incorrectly. Param1: nodeId Param2, Param3: first 8 characters of filename (excluding path) 1

726949 58308 vc vcfsafilemgrc.cc A message has been deleted because it was renamed by an external process. Param1: nodeId Param2, Param3: first 8 characters of filename (excluding path) 1

726950 58309 vc vcfsafilemgrc.cc A file in the voicemail directory has been deleted because it was renamed by an external process. Param1: nodeId Param2, Param3: first 8 characters of filename (excluding path) 1

726972 58310 vc vcfsafilemgrc.cc An invalid message was uploaded to the PBX and has been deleted. Param1: nodeId Param2, Param3: first 8 characters of filename (excluding path) 2

726973 58311 vc vcfsafilemgrc.cc An invalid personal greeting was uploaded to the PBX and has been deleted. Param1: nodeId Param2, Param3: first 8 characters of filename (excluding path) 1

727019 58312 vc vcallbackuprestorehandlerc.cc Method handleBackupRequest() called in wrong state. Param 1: actual state (VcAllBackupRestoreHandlerC::StateEnu) Param 2: expected state 1

727020 58313 vc vcallbackuprestorehandlerc.cc Deleting the backup zip file failed. File will remain in PBX file system! 1

727021 58314 vc vcallbackuprestorehandlerc.cc Deleting the Assignment Table File failed! File will remain in PBX file system! 1

727024 58315 vc vcallbackuprestorehandlerc.cc Method handleFileUploaded() called in wrong state. Param 1: actual state (VcAllBackupRestoreHandlerC::StateEnu) Param 2: expected state 1

727050 58316 vc vcallbackuprestorehandlerc.cc Unzipping the voice mail audio files form the backup zip file failed! 1

727051 58317 vc vcallbackuprestorehandlerc.cc Vm audio file restore procedure: Deleting the assignment table file failed! The file will remain in the PBX file system! 1

727052 58318 vc vcallbackuprestorehandlerc.cc Vm audio file restore procedure: Unzipping the backup info file (including the assignment table) failed! 1

727067 58319 vc vcallbackuprestorehandlerc.cc In method handleFileUploaded(): Deleting the backup zip file failed. File will remain in PBX file system! 1

727068 58320 vc vcallbackuprestorehandlerc.cc ZIP file name in class variable "myZipFile" is empty - so it is not possible to delete the temporarily stored ZIP file. 1

727074 58321 vc vcallbackuprestorehandlerc.cc Creating the assignment table form the assignment table file in the backup zip file failed! 1

727710 58322 vc vcallmainc.cc Could not create voice directory! Param1: fs errno Param2: identifier 1

730909 58323 vc wssrvsubmithandler.cc

Backup audio file couldn't be done. Parameter 0: VcAllBackupRestoreHandlerC::ResponseEnu 0 = Undef, 1 = Reset Ok, 2 = Could not create the assignment table file 3 = Could

not zip the backup info and the audio files together 4 = The zip file is ready for download to the client 5 = A request was received in a wrong state 1

732046 58324 vc vcalllib.cc Could not create directory. Param 1: errno (from file system) 1

734829 58325 vc vcsrvservicevoicemailsvmc.cc VM message created in FS but could not send VM-MWI e-mail because mboxId, subsId (of mailbox owner) or msgId did not match. Param 1: mboxId Param 2: subsId (mbox 1

734903 58326 vc vcsrvservicevoicemailsvmc.cc Didn't receive FS notification of VM message to attach to MWI e-mail! Param1: mboxId Param2: msgId 1

744520 58327 vc vccmivmforwardingcmdc.cc

The voice mail forwarding could not be executed successfully! Reason in Param1: 1 = could not copy the voicemail file 2 = could not create new message 3 = original message

was not found 4 = the destination subscriber has no mailbox 5 = the destination mailbox has not enough free capacity 5

744825 58328 vc vccmivmforwardingcmdc.cc // Error - Trying to link message to itself creating a circular reference!!! parameter: 1 = mailboxId 2= new message id 1

745354 58329 vc vccmisessionmanagerc.cc Could not find a session corresponding to this pref/channel combination Param1: userId Param2: bcs ref Param3: port reference/channel in method 6

745355 58330 vc vccmisessionmanagerc.cc This session has no call recording command object Param1: userId Param2: bcs ref Param3: port reference/channel in method handleVoiceSendCallRecordingStatus parameter 5

745358 58331 vc vccmicallrecordingcmdc.cc handleMailSendStatus Param1: status status is defined in (file arsigvoice.hh) enum ArTypEmailSendingStateEnu { ArTypEmailSendingStateUndef, 2

745492 58332 vc vccmiactivatecmdc.cc This mailbox is not assigned to a user! Param 1: mboxId 1

745493 58333 vc vcsrvautoattendantc.cc This mailbox is not assigned to a user! Param 1: mboxId Param 2: error location 3

745496 58334 vc vceclintmailboxc.cc This mailbox is not assigned to a user! Param 1: mboxId Param 2: error location 1

745497 58335 vc vcfsafilemgrc.cc This mailbox is not assigned to a user! Param 1: mboxId Param 2: error location 1

748253 58336 vc vcsrvservicec.cc Tried to start timer without signal buffer - timer not started. 1

748254 58337 vc vcsrvservicevoicemailsvmc.cc Tried to start auto attendant delay timer without signal buffer - timer not started. 1

748255 58338 vc vcsrvservicevoicemailsvmc.cc Tried to start auto attendant delay timer without signal buffer - timer not started. 1

748256 58339 vc vccmideletecmdc.cc Tried to start delete confirmation timer without signal buffer - timer not started. 1

748258 58340 vc vccsyconconnectionc.cc Tried to start courtesy connection timer without signal buffer - timer not started. 1

748259 58341 vc vcfsamsgcleaner.cc Tried to start message cleaner timer without signal buffer - timer not started. 1

748260 58342 vc vcsrvserviceplayvoicemailavsc.cc Tried to start previous/next timer without signal buffer - timer not started. 1

748261 58343 vc vcsrvserviceplayvoicemailc.cc Tried to start VM forwarding activation timer without signal buffer - timer not started. 1

748262 58344 vc vcsrvserviceplayvoicemailc.cc Tried to start jump back timer without signal buffer - timer not started. 1

749070 58345 vc vcsrvservicec.cc Trying to set a new subservice while a subservice is still active. Param 1: userId Param 2: mboxId 2

749071 58346 vc vcsrvremotemgntc.cc Starting the "Play VoiceMail" service failed. Param 1: userId Param 2: mboxId 1

749072 58347 vc vcsrvremotemgntc.cc Starting the "Playback" service failed. Param 1: userId Param 2: mboxId 1

749073 58348 vc vcsrvremotemgntc.cc Starting the "Record" service failed. Param 1: userId Param 2: mboxId 1

749074 58349 vc vcsrvremotemgntc.cc Wrong state to handle signal. Param1: mboxId Param2: signal Param2: actual state, expected state 1

749077 58350 vc vcsrvremotemgntc.cc Should not call timeout handler of the VcSrvRemoteMgntStateC base class. Param1: mboxId Param2: timeout signal (VoiceMinorEnu) 1

749078 58351 vc vcsrvremotemgntc.cc Message to exit subservice received in wrong state! No subservice is running! Param1: mboxId Param2: state 1

749178 58352 vc vcsymcomposerc.cc The "dateTimeKind" has a wrong or unknown state. The "spocken presence" composer plays nothing. param1 = presenceState (ArTypPresenceStateEnuC) param2 = 4

749871 58353 vc VcCsyCallerC The signal 'MajorCourtesy, CsyState' could not be sent to the processInitiator because 'processId' is null! Param1 = CsyState Param2 = myBcsRef Param3 = myPortRef 2

757167 58354 vc vcsrvserviceniqsequencec.cc Method used with invalid service (dynamic cast failed). Param1: vcBcsRef Param2: mboxId Param3: state 1

757168 58355 vc vcsrvserviceniqsequencec.cc Wrong state to handle "Connect" signal. Param1: vcBcsRef Param2: mboxId Param3: state 1

757169 58356 vc vcsrvserviceniqsequencec.cc Invalid state to handle "Timeout" signal. Param1: vcBcsRef Param2: mboxId Param3: state, VoiceMinorEnu(minor) 1

757170 58357 vc vcsrvserviceniqsequencec.cc Unknown Timeout Signal. Param 1: vcBcsRef Param 2: mboxId Param 3: VoiceMinorEnu(minor) 1

757461 58358 vc vcsrvserviceniqsequencec.cc Should not get "CallRejected" signal without auto attendant. Param1: vcBcsRef Param2: mboxId Param3: reject cause 1

757463 58359 vc vcsrvserviceniqsequencec.cc Wrong state to handle "callRejected" signal. Param1: vcBcsRef Param2: mboxId Param3: state 1

757464 58360 vc vcsrvserviceniqsequencec.cc Wrong state to handle "playingComplete" signal. Param1: vcBcsRef Param2: mboxId Param3: state 1

757479 58361 vc vcsrvserviceniqsequencec.cc First sequence step does not exist. Param1: sequenceId Param2: - Param3: - 2

758591 58362 vc unused Unused 4

760198 58363 vc vccsyfilemgrc.cc File manager subscription failed. The link handler could not send the signal to the file manager, e.g. load module fmgr not available/loaded. The existence of the file manager 1

760199 58364 vc vccsyfilemgrc.cc File manager unsubscribe failed. The link handler could not send the signal to the file manager, e.g. load module fmgr not available/loaded. The existence of the file manager 1

760200 58365 vc vccsyfilemgrc.cc File manager delete request FmCmdDelete failed. The link handler could not send the signal to the file manager, e.g. load module fmgr not available/loaded. The existence of the 1

760201 58366 vc vccsyfilemgrc.cc File manager rename request FmCmdRename failed. The link handler could not send the signal to the file manager, e.g. load module fmgr not available/loaded. The existence of 1

760202 58367 vc vccsyfilemgrc.cc File manager get dir request FmCmdDirAll failed. The link handler could not send the signal to the file manager, e.g. load module fmgr not available/loaded. The existence of the 1

760665 58368 vc vccmivmforwardingcmdc.cc The voice message forwarding command can not send a command response because the process initiator is 'Undef'. 2

760787 58369 vc vccsymgrc.cc

The wave file of the welcome announcement couldn't not be played and the replacement tone has a tone duration of 0 seconds. This configuration problem can trigger a endless

loop of playing 0 second tone if the next sequence points to the same sequence. That is the reason why the welcome announcement is stopped! param1 = welcome

announcement 'sequenceId' param2 = welcome announcement 'steId' 5

770820 58370 vc vcallbackuprestorehandlerc.cc Restore personal VM greetings - Could not create mailbox directory! Param1: mboxId Param2: errno 2

771314 58371 vc vcsrvannouncementservicec.cc Start Vc Announcement service - the provided parameters are invalid! Param1: announcementFileId Param2: numOfPlays 4

771316 58372 vc vcsrvannouncementservicec.cc Start Vc Announcement service - the node is not in a state to play announcement files! Param1: nodeId Param2: nodeState (VcFsaNodeC) 4

771317 58373 vc vcsrvannouncementservicec.cc Vc Announcement service - the provided announcement file is in an unexpected state - we can't play it! Param1: announcementFileId Param2: fileState 4

771318 58374 vc vcsrvannouncementservicec.cc Vc Announcement service - no announcement file name found for the specified announcement file id. Param1: announcementFileId 3

771789 58375 vc vcsrvannouncementservicec.cc Vc Announcement service - Trying to start service in state different from "Idle"! Param 1: state 1

771790 58376 vc vcsrvannouncementservicec.cc Vc Announcement service - Received timeout signal in state different from "Silence"! Param 1: state Param 2: minor (VoiceMinorEnu, TimeoutSignal) 1

771791 58377 vc vcsrvannouncementservicec.cc Vc Announcement service - Received playingComplete() in state different from "Playing"! Param 1: state 1

776397 58378 vc vcsrvconferenceservicec.cc Invalid parameter(s) to start conference service! Param 1: vcBcsRef Param 2: callingBcsRef Param 3: callingPref/callingChan 2

776402 58379 vc vcsrvconferenceservicec.cc Vc conference service - trying to start service in state different from "Idle"! Param 1: state (VcSrvConferenceStateC::State) 1

776404 58380 vc vcsrvconferenceservicec.cc Vc conference service - received timeout signal in wrong state! Param 1: state (VcSrvConferenceStateC::State) Param 2: minor (VoiceMinorEnu) 1

776405 58381 vc vcsrvconferenceservicec.cc Vc conference service - received playingComplete() in wrong state! Param 1: state (VcSrvConferenceStateC::State) 1

776415 58382 vc vccmisessionmanagerc.cc Failed to add conference! Param1: userId (of the user who created the conference room) Param2: confId 2

776416 58383 vc vccmisessionmanagerc.cc Failed to add member to conference! Param1: userId (of the user who created the conference) Param2: confId 2

776445 58384 vc vcsrvconferenceservicec.cc Vc conference service - received conferenceContinue() in wrong state! Param 1: state (VcSrvConferenceStateC::State) 2

776520 58385 vc vcsrvconferenceservicec.cc Should not receive playingComplete() for specified textId in this state! Param1: textId (id of audio guide prompt) Param2: state (VcSrvConferenceStateC::State) 1

776548 58386 vc vcsrvconferenceservicec.cc Conference service: Silence timeout after wrong text! Param1: textId (id of audio guide text) 1

776550 58387 vc vcsrvconferenceservicec.cc Conference service: Tone timeout in wrong state (wrong prompt)! Param1: textId (id of audio guide text (prompt)) 1

776767 58388 vc vccsymgrc.cc This portref/channel is already in a courtesy connection. param1: Bcsref param2: PortRef param3: Channel 1

783423 58389 vc vcallmainc.cc Could not create Audio Guide language directory. Param 1: langId 1

784723 58390 vc vcfsanodec.cc Unexpected file manager subscription type. Param1: type (FmSubscriptionEnu) Param2: subscription id Param3: call location 1

785789 58391 vc vcalllib.cc Reading audio record id form voice.ini file failed. Param1: status (KvpAttributeState) 2

785791 58392 vc vcalllib.cc Opening the voice.ini file for reading failed. Param1: status (KvpAttributeState) 1

785792 58393 vc vcalllib.cc Writing audio record id to voice.ini file failed. Param1: status (KvpAttributeState) 1

785793 58394 vc vcalllib.cc Opening the voice.ini file for writing failed. Param1: status (KvpAttributeState) 1

789837 58395 vc vcsrvwakeupconfigservicec.cc Invalid parameters for starting a wake-up configuration service. Param1: vcBcsRef Param2: callingBcsRef Param3: callingPref/callingChan 1

789838 58396 vc vcsrvwakeupconfigservicec.cc Vc wake-up config service - trying to start service in state different from "Idle"! Param1: actual state (VcSrvWakeUpConfigStateC::State) 1

789839 58397 vc vcsrvwakeupconfigservicec.cc Vc wake-up config service - connect message received in state different from "Idle"! Param1: actual state (VcSrvWakeUpConfigStateC::State) 2

789840 58398 vc vcsrvwakeupconfigservicec.cc Vc wake-up config service - received timeout signal in wrong state! Param1: actual state (VcSrvWakeUpConfigStateC::State) 1

789841 58399 vc vcsrvwakeupconfigservicec.cc Vc wake-up config service - Received playingComplete() in wrong state! Param1: actual state (VcSrvWakeUpConfigStateC::State) 2

790217 58400 vc vccmimovemboxcmdc.cc Trying to move mailbox to different node. Moving mailboxes is currently possible on the master only! (Cr 58359) Param1: source mboxId/nodeId Param2: dest mboxId/nodeId 1

790218 58401 vc vccmimovemboxcmdc.cc Move mailbox: Copying message from source mailbox to destination mailbox failed! Param1: source message id Param2: source mailbox id Param3: dest mailbox id 1

790226 58402 vc vccmimovemailboxcmdc.cc Did not find VcAudioRecord object in database - findUnique() failed! Param1: message id (VcAudioRecordIdC) 1

790228 58403 vc vccmimovemailboxcmdc.cc Did not find VcMailbox object in database - findUnique() failed! Param1: mailbox id (VcMailboxIdC) Param2: error id 2

790272 58404 vc vccmimovemboxcmdc.cc Move messages: destination user does not have a mailbox. Param1: destination user Param2: source user 1

791084 58405 vc vcsrvserviceplayvoicemailsvmc.cc Function VcSrvServicePlayVoicemailSvmC::startRemoteMgntSubService service could not be created. 1

791087 58406 vc vccmisessionmanagerc.cc Function VcCmiSessionManagerC::handleVoiceServiceInfo The session could not be found. 1

791224 58407 vc vcsrvservicevoicemailsvmc.cc method VcSrvVoicemailStateSvmAudioPromptC::playingComplete unexpected activePrompt Param 1: mboxId Param 2: errorNr 1

693938 60001 np npnumcommon.cc No valid directory entry for subtype operator 1

693939 60002 np npnumcommon.cc Direct entry for subtype not valid (operator) 1

693940 60003 np npnumcommon.cc No valid directory entry for subtype Emergency 1

693941 60004 np npnumcommon.cc Directory entry for subtype not valid (Emergency) 1

693942 60005 np npnumcommon.cc No valid directory entry for subtype CostCentre 1

693944 60006 np npnumcommon.cc Directory entry for subtype not valid (CostCentre) 1

693946 60007 np npnumcommon.cc No valid directory entry for subtype StarReplacement 1

693947 60008 np npnumcommon.cc Directory entry for subtype not valid (StarReplacement) 1

693948 60009 np npnumcommon.cc No valid directory entry for subtype ExternalAccess 1

693949 60010 np npnumcommon.cc Directory entry for subtype not valid (ExternalAccess) 1

693950 60011 np npnumcommon.cc No valid directory entry for subtype LocalNode 1

693951 60012 np npnumcommon.cc Directory entry for subtype not valid (LocalNode) 1

693952 60013 np npnumcommon.cc No valid directory entry for subtype NetworkSubscriber 1

693953 60014 np npnumcommon.cc No valid directory entry for subtype UserGroup 1

693954 60015 np npnumcommon.cc No valid directory entry for subtype UserGroup 1

693955 60016 np npnumcommon.cc Directory entry for subtype not valid (UserGroup) 1

693956 60017 np npnumcommon.cc No valid directory entry for subtype Abbreviated 1

693957 60018 np npnumcommon.cc Directory entry for subtype not valid (Abbreviated) 1

693958 60019 np npnumcommon.cc No valid directory entry for subtype Door 1

693959 60020 np npnumcommon.cc Directory entry for subtype not valid (Door) 1

693960 60021 np npnumcommon.cc No valid directory entry for subtype HDLCTerminalAdaptor 1

693961 60022 np npnumcommon.cc Directory entry for subtype not valid (HDLCTerminalAdaptor) 1

693962 60023 np npnumcommon.cc No valid directory entry for subtype Subsrciber 1

693963 60024 np npnumcommon.cc Directory entry for subtype not valid (Subscriber) 1

693964 60025 np npnumcommon.cc No valid directory entry for subtype CallDistribution 1

693965 60026 np npnumcommon.cc Directory entry for subtype not valid (CallDistribution) 1

693966 60027 np npnumcommon.cc No valid directory entry for subtype route 1

693967 60028 np npnumcommon.cc Directory entry for subtype not valid (route) 1

693968 60029 np npnumcommon.cc Too complex 1

693969 60030 np npnumcommon.cc A value of NpNumAnalEnuC could not be mapped to NpNumElemEnu. The maximum value will be returned instead. 1

693970 60031 np npallcast.cc A cast operator is out of date, its name is given in the parameters. 1

693971 60032 np npnumindex.cc See br21379: for some reason someone succeeded when trying to change a number through the numberingplan, please report this error. 2

693972 60033 np npalldireinserts.cc Operator >= has been called. Function implemented (not tested yet) 1

693973 60034 np npnumindex.cc Someone tried to insert two directory entries with the same number in function xaNumIdxInsert. Reference is br27386. 1

693974 60035 np npnumcommon.cc No valid directory entry for subtype VoiceMail 1

693975 60036 np npnumcommon.cc Directory entry for subtype not valid (VoiceMail) 1

693976 60037 np npnumcommon.cc Function xaNumGetVoiceMailNum is called but no VoiceMail number is configured. 1

693981 60038 np npnumcommon.cc During numberingplan population at NP startup two directory entries with the same number are present (this should never happen) the responsible directory entry has been 1

694152 60039 np npnumrouteproperties.cc We have found a route instance in NP without a corresponding directory entry instance. The first parameter is the NpRouteIdC value. 1

700405 60040 np npnumdireproperties.cc loop run to the end in function NpNumDirePropertiesC::getDirEntryId without result used to detect sources of inefficencies 1

734476 60041 np pri/npnumcommon.cc No valid directory entry for subtype AMCC 1

734477 60042 np pri/npnumcommon.cc Directory entry for subtype not valid (AMCC) 1

764561 60043 np npdescont.cc function NpDesDirProcC::handleArSktSig: signal could not be handled 1

764567 60044 np npdesasynchfacadec.cc function NpDesAsynchFacadeC::forwardToNameServer, nameSrvLstSktP is NULL 1

765372 60045 np ndesasync.cc ATNS: A case is not treated, ignored or maybe not implemented. 1

765374 60046 np npdessync.cc ATNS: A case is not treated, ignored or maybe not implemented. 1

765383 60047 np npdesagent.cc A command is not understood by ATNS (agent). 1

765389 60048 np npdescont.cc npDesDirProc: a case when a signal received is not treated. 1

705994 62001 us usallmainprocc.cc Unknown Signal - MajorUs, minor unknown. Param1: minor 1

706007 62002 us usalluserc.cc Trying to update voice mail status but no voice mail status object available. Param1: userId 1

706009 62003 us usalluserc.cc Trying to assign voice mail status object to user who already has one. Param1: userId 2

706011 62004 us usallusermanagerc.cc Trying to activate voice mail mwi on a user who does not exist. Param1: userId 1

706012 62005 us usallusermanagerc.cc Trying to deactivate voice mail mwi on a user who does not exist. Param1: userId 1

706014 62006 us usallusermanagerc.cc Trying to set voice mail mwi status on a user who does not exist. Param1: userId 1

706938 62007 us usallusermanagerc.cc Trying to get voice mail mwi status from a user who does not exist. Param1: userId 1

726762 62008 us usallusermanagerc.cc Trying to get user who does not exist in Us. Param 1: userId 1

736158 62009 us usallsynchfacadec.cc Conversion from sRef to userId failed! Param 1: user number Param 2: sRef 1

736159 62010 us usallsynchfacadec.cc Conversion from sRef to ugId failed! Param 1: user number Param 2: sRef 1

736446 62011 us usallsynchfacadec.cc Must not call UsAllSynchFacadeC on satellite! Pram1: id to locate call of this error report 1

741663 62012 us usallsynchobserverc.cc Must not call UsAllSynchObserverC on satellite! 1

744771 62013 us usfeasynchfacadec.cc Default switch/case: Undefined value for XaCallRecordingDestinationEnuC 1

759311 62014 us usalluserc.cc Personal Call Routing related error in US domain. 1

778343 62015 us uslibcallforwarding.cc Untreated CallForwarding type in checkAgainstDigitBarrier() Param 1 = userId Param 2 = ArTypCfxEnuC Param 3 = 0 1

791761 62016 us usallmainprocc.cc This alarm is for user based license feature (req-1094), the alarm is called LicenceMissingForConfiguredUser. No Parameters This alarm is sent when the system has discovered 3

791763 62017 us usallmainprocc.cc This alarm is for user based license feature (req-1094), the alarm is called LicencePresentForConfiguredUser No Parameters This is the counter part for the alarm 62016. It is 3

741421 64001 ahap hmhotelprocc.cc general error hotel proc 1

741716 64002 ahap hmalljournalc.cc could not create/open journal file for writing/append info (used also in file hmallwakeupjournal.cc) 2

741717 64003 ahap hmalljournalc.cc Could not create Directories For Hotel Journal Param1: errno Param2: 1 means "/home/logs" 2 means "/home/logs/hospitality" 3

742226 64004 ahap hmhotelprocc.cc Unexpected / unknown signal or parameter in the signal. Parameters: 1. minor (major is always MajorFm) 2. unexpected parameter (or 0 if the whole signal is 1

742252 64005 ahap ahapallasynchfacadec.cc Timeout waiting for a response signal 1

742263 64006 ahap hmallhotelmanagerc.cc something wrong during Backup/Restore of hotel call logging template 1

742323 64007 ahap hmallwakeupjournal.cc Could not create Directories For Wake Up Journal Param1: errno Param2: 1 means "/home/hotel" 2 means "/home/hotel/wakeup" 1

742336 64008 ahap ahapasynchhotelobserverc.cc Failed to send signal via linkhandler to Hotel Process Param3: 0 is for "attach" web session 1 is for "attach" terminal session 2 is for "detach" 2

742337 64009 ahap ahapasynchhotelobserverc.cc Timeout while waiting for answer from Hotel Process Param3: 0 is for "attach" web session 1 is for "attach" terminal session 2 is for "detach" 2

742338 64010 ahap ahapasynchhotelobserverc.cc Unknown Major/Minor combination Param 1 Major of signal Param 2 Minor of signal 2

742347 64011 ahap hmallhotelmanagerc.cc HmAllHotelManagerC::handleClInfo Could not open file in file system Param 1: userId Param 2: roomId Param 3: ferror(fileP) or NULL 1

742348 64012 ahap hmallhotelmanagerc.cc Failed to create Room directory Param 1: userId Param 2: roomId 1

742349 64013 ahap hmallhotelmanagerc.cc Could not create Directories For Hotel Call Log Param1: errno Param2: 1 means "/home/hotel" 2 means "/home/hotel/calllog" 3 means "/home/hotel/calllog/r" 1

742350 64014 ahap hmallhotelmanagerc.cc Could not create Directory For Hotel Call Logging Templates Param1: errno Param2: 1 means "/home/data" 5

742352 64015 ahap free error id 3

742353 64016 ahap free error id 3

742354 64017 ahap hmhotelprocc.cc Could not create Directories for Hotel Process Param1: errno Param2: 1 means "/home/hotel" 2 means "/home/hotel/calllog" 3 means "/home/hotel/wakeup" 1

742586 64018 ahap hmallhotelmanagerc.cc Could not further reduce the file system usage. Error has to be investigated on the CS online - may be the file system size reserved for Hospitality is too small - may be files are 3

743131 64019 ahap hmpmsfieldc.cc Decoding of FIAS record field not implemented. Param 1: Field Id (two acii characters) 1

745731 64020 ahap ahap/pri/hotel/hmallhotelmanagerc.c Positive alarm: We have a license to run the FIAS protocol. 1

745733 64021 ahap ahap/pri/hotel/hmallhotelmanagerc.c Negative alarm: There is no license to start the FIAS protocol. 1

745734 64022 ahap ahap/pri/hotel/hmlanprinter.cc Positive alarm: Connection to the hotel LAN printer is working again. 1

745736 64023 ahap ahap/pri/hotel/hmlanprinter.cc Negative alarm: Can't establish connection to the Hotel LAN printer user by the Aastra 5380 Reception terminal. 1

745737 64024 ahap ahap/pri/hotel/hmpmsprotocolinterfa Positive alarm: Before the messages buffer was full and did get purged. Now the connection seem to work again and messages are exchanged with the PMs 1

745738 64025 ahap ahap/pri/hotel/hmpmsprotocolinterfa Negative alarm: Because the FIAS connection to the PMS is down outgoing messages get buffered. Now are more than 5000 messages buffered. That is too much got rid of them 1

745744 64026 ahap ahap/pri/hotel/hmpmsprotocolinterfa Positive alarm: FIAS Connection to the PMS could be reestablished again 1

745745 64027 ahap ahap/pri/hotel/hmpmsprotocolinterfa Negative alarm: Couldn't establish the FIAS connection to the PMS Param 1: 1 = Connection refused 2 = Destination not reachable 3 = Destination busy 4 = Connect timeout 5 = 1

748192 64028 ahap hmallhotelmanagerc.cc WakeUpConfirmed alarm 1

750975 64029 ahap ahap/pri/hotel/hmallhotelmanager.cc Couldn't add a line to the WakeUp journal 1

790306 64030 ahap hmallhotelmanagerc.cc Error while copying a file - the file might be corrupt. Param1: Bytes read during the last read cycle. Param2: Byte written during the last write cycle. 1

790735 64031 ahap hmsx200hmprotocolinterfacec.cc Negative Alarm The SX200 PMS HotelManagement Link to the PMS is down 2

790736 64032 ahap hmsx200hmprotocolinterfacec.cc Positive Alarm The SX200 HotelManagement Link to the PMS is up again 1

791387 64033 ahap hmsx200vmprotocolc.cc Negative Alarm The SX200 PMS VoicemailManagement Link to the PMS is down 1

791388 64034 ahap hmsx200vmprotocolc.cc Positive Alarm The SX200 PMS VoicemailManagement Link to the PMS is up 1

792789 64035 ahap hmallhotelmanager.cc iConnect (de)assignment error 1

errorid_nr errorid_number domain_name location - Home ...

Documents

Transcript of errorid_nr errorid_number domain_name location - Home ...