Vehicle DVR Camera& Monitor Video Recording Kit

Rear View / Backup Camera Systemswith 7" -inch Display Monitor

(with Quad View, 4-Cam Video Support)

www.PyleUSA.com1 www.PyleUSA.com 2

NOTICEFor your safety, please do not watch videos on the monitor when driving. Except professional repair-men, do not modify the machine. lf the machine doesn‘t work, please consult customer services or send the machine to local maintenance departments.

WARNING: Please install this machine in the place where laws and regulations allows it, our company take no responsibility for illegal product installation.

ATTENTION:The machine may appear darkscreen phenomenon when starting up in the cold days, after power on and machine's temperature gradually rises up, the display screen would gradually return to normal.

SYSTEM FEATURES:● Multi-Camera & Monitor Video System Kit● 7’’ -inch LCD Monitor Display Screen● DVR Video Recording via SD Memory Card Slot● Quad View Camera Selectable: Choose Your Camera, View it On-Screen● Compatible with Up to 4-Camera Video Input Support● Universal Exterior Mount Rearview Backup Cameras● Marine Grade Waterproof Rated Cams● Night Vision Illumination● Angle Adjustable Camera Lens● Rugged & Heavy-Duty Construction● Perfect for Large Production Vehicles DVR VIDEO RECORDING:● DVR Recording: 4-Channel Video Signal● VGA Resolution：720 x 480, PAL● Recording speed: 50FPS (NTSC, 60FPS)● Storage format: AVI

ROUND CAMERA:● Video System: PAL/NTSC Auto Switching● Image Sensor: 1/4'' Color CMD● LED Light: 12 IR LED Lights● E�ective Pixel: 580 x 540 Pixels● Lens Angle: 170° Degree● Marine Grade Rating: IP-69● Camera Dimensions (W x H x D): 3.2'' x 3.2'' x 2.2'' inches● Weight: 0.72 lbs. SQUARE CAMERA:● Video System: PAL/NTSC Auto Switching● Image Sensor: 1/4'' Color CMD● LED Light: 18 IR LED Lights● E�ective Pixel: 580 x 540 Pixels● Lens Angle: 170° Degree● Marine Grade Rating: IP-69● Camera Dimensions (W x H x D): 3.2'' x 3.2'' x 2.2'' inches● Weight: 0.94 lbs. TECHNICAL SPECS:● LCD Screen: 7’’ -inch 16:9 Image● Micro SD Card Support: Up to 32 GB *Not Included● OSD Control: Color, Brightness, Contrast, Volume, Language● Power Cord Length: 4-Pin Cable 49.2’ ft.● Brightness: 350-400cd/m2● Aspect Ratio: 16:9● Power Supply: DC 12-24V● Monitor Dimensions (L x W x H ): 7.08’’ x 4.76’’ x 1.02’’ inches

APPLICATIONThis product adopts digital TFT color LCD of high de�nition real-time monitoring, stored in SD card; built-in DVR recording function with one single image or quad split images; supports 1way AV recording; built-in speaker and with remote control. The installation is convenient and the connection is simple.

www.PyleUSA.com3 www.PyleUSA.com 4

With no radiation, low comsumption, beautiful and vivid image, small size etc features, widely applied in universal car security and monitor.

1. Labelling Mark2. MENU: Compound key in the settings menu, four split & DVR mode.3. CH 1: Direct channel CH 1 mode in split mode. In four split state its the menu minus. Menu up in DVR state, its the last page in the DVR video playback state is used to select videos.4. CH 2: Direct channel CH 2 mode in split mode. Menu plus in four split state. Drop down menu in DVR State. The next page in DVR video playback state, used to select videos.5. POWER: Monitor standby/switch ON6. CH3: It is the direct channel 3 mode in split mode, it is the down in the four split status menu, left in the DVR status menu, CH3 is the play button in DVR video.7. CH4: It is the direct channel 4 mode in split mode, UP in the four split status menu, right in DVR status status menu, and in DVR videos CH4 indicates “pause”. 8. MODE: In four split screen, it is the cyclic switching of the mode 2 division, -3 segmentation, -4 segmentation. In DVR state, MODE is used to switch playback/video mode.9. Remote Control window.

BUTTON FUNCTION

1. Labelling Mark2. POWER: Compound key long press indicates that the monitor is standby/switched on. Short press indicates four split/DVR screen switching3. MODE: Compound key short press indicates the loop switch of the split mode 2-split 3-split4/ln the DVR state. MODE can switch to playback/video mode. Long press represents the conversion of the four division and the DVR mode4. CH1: It is the direct channel CH1 mode in split mode/In the four split state, it is menu minus/the menu up in the DVR state/ the last page in DVR video playback state, used to select videos.5. CH2: The direct channel CH2 mode in split mode/It is menu plus in the four split state/It is the menu down in the DVR state/ It is the next page in the DVR video playback state, used to select videos.6. Ch3: The direct channel 3 mode in split mode/down in the four split status menu/left in DVR status menu/in DVR video, CH3 is the play button7. Ch4: Direct channel 4 mode in split mode/It is up in the four split status menu/It is right in the DVR status menul In DVR videos. CH4 indicates pauses

www.PyleUSA.com5 www.PyleUSA.com 6

REMOTE CONTROL

REC/ENTER: In DVR mode, video start (stop) / con�rm function

RIGHT: Right direction

MENU: Screen display settings menu

DOWN: Down direction

MODE: Four split compound split mode switching. Cyclic switching of 2

segmentation, 3 segmentation, 4 segmentation

CH1: In the four split mode, use to switch directly to single channel 1

VOL+: Volume increase. No power mode. No support

CH2: In the four split mode, use to switch directly to single channel 2

CH3: In the four split mode, use to switch directly to single channel 3

VOL-: Volume reduction. No power mode. No support

CH4: In the four split mode, use to switch directly to single channel 4

INSTRUCTION MANUALHow to set DVR video timeIn DVR mode, enter the DVR settings menu via remote control SETUP or panel MENU, and then click it again to enter the SETUP Options box as follows:

Press up and down to enter the INPUT item remote control.REC/ENTER to enter date setting. Remote control 'REC/ENTER' or panel. press CH3 to enter time setting. Change the time page up and down:

How to operate DVR videoIn DVR mode, remote control MODE1 or long press the keypad MODE to switch to burn mode, while the lower left corner of the white time display as shown

POWER: Standby/boot. through this button. you can achiev standby mode or boot modeDVR/AV: Toggle the DVR mode and the four split modeMODE1: In DVR mode. it is used for loop switching of video/playbackSETUP: In DVR mode. you can open the DVR settings menuUP: Up directionMUTE: Mute switch. No power amplifier. no supportLEFT: Left direction

www.PyleUSA.com7 www.PyleUSA.com 8

And then remote control REC / ENTER or monitor panel long press CH3 for recording mode. The image began to burn, the upper left corner of the red dot will �ash as shown:

How to view DVR burn videosIn the DVR mode, remote control MODE1 or press the panel MODE to switch to view the recording mode, the upper left corner ofthe display has a black folder icon and the current video track display. You can press CH1/CH2 up and down button to select di�erent video �le.In the lower left corner; OK, play, pause icon and time displays, and then remote control REC / ENTER or panel press CH3 to con�rm the video playback:

CONNECTION

ACCESSORY

INSTALLATION EXAMPLES

Monitor system used in truck, bus, express car, or special vehicle

www.PyleUSA.com9 www.PyleUSA.com 10

MONITOR STANDARD INSTALLATION1. Remove the screw around then take out the monitor. Put U type bracket to the right place and adjust. Prepare 3 screws. (see below pictures)

2. Lock the bracket by screws. Put the monitor into the bracket. Adjust angle and locking it. (see below pictures)

3. Finish the installation. The adjustable angle is forwad 30° and backward 30°. User can adjust its preferred angle. (see below pic.)