SUPPORTING THE NORTH SEA ENERGY INDUSTRY

1P O R T O F C R O M A R T Y F I R T H S U P P O R T I N G T H E N O R T H S E A E N E R G Y I N D U S T R Y

SUPPORTING THE NORTH SEA ENERGY INDUSTRY

WHERE VISION CREATES GROWTH

DECOMMISSIONING

V


SCOTLAND’S PREMIER DEEPWATER PORT

Strategically located in the North Sea and accessible 24/7/365, the Port of Cromarty Firth, Invergordon, has successfully developed into one of Europe’s leading port facilities for the energy sector. The Port’s Invergordon Service Base is the ideal location for North Sea decommissioning activities and has the necessary experience, capacity and supply chain already in place.

THE PORT OF CROMARTY FIRTH IS A TRUST PORT WITH THE FOLLOWING UNIQUE CHARACTERISTICS

Strategically located to support central

and northern North Sea

Multi-user facility, open to all contractors (no exclusive alliance)

Guaranteed access for a quick vessel turnaround:

Truly sheltered waters (365 days)

No tidal constraints

Well-marked, uncluttered seaward approach entrance

Wide and deep channel (from 15-50m)

Excellent dedicated facilities:

Large service base with three dedicated decommissioning berths (448m in total) capable of taking in vessels up to 300m

Deepwater berths (up to 14m at chart datum)

Laydown areas totalling 80,000sqm

Well established on-site supply chain with proven track record in industry

A port operating under a quality management system (ISO 9001) and with strict compliance to maritime and waste management regulations

DECOMMISSIONING BERTHSBerth2, 3, 4

Suitable for semi-submersible rigs and jackups. Mooring bollards up to 300 tonnes. Minimum water depth 8–14m. 288m long with heavy lift capabilities.

Queens Dock

Suitable for semi-submersible rigs and jackups. 150m long with 50 tonnes and 250 tonnes mooring bollards.Minimum water depth 12m.

New Berth 5 154m long, with 50 tonnes and 250 tonnes mooring bollards. Minimum water depth 12-13.5m. Adjacent to nine acres of laydown.

PORT OF CROMARTY FIRTH FACILITIES

2


NO DECOM JOB TOO... The Port of Cromarty Firth is one of the leading ports in the UK with the laydown space and water depth to accommodate some of the world’s largest structures and vessels.

The Port of Cromarty Firth has the necessary heavy-lifting capability and water depth to accept the largest structures and the latest heavy-lift vessels, including the Pioneering Spirit’s barge, the Iron Lady.

The Port offers an uncluttered wide entrance well-marked by two prominent headlands

Its channel is half a mile wide with water depths ranging from 15m to 26m at chart datum (reaching up to 50m within the Firth)

The Port is well known for its deep sheltered waters which are open all year round

Port of Cromarty Firth offers flexibility with a choice of three berths/quaysides suitable for decommissioning activity, ensuring a quick turnaround:

Berth 4 offers a quayside length of 133m with 14m depth at chart datum

Queens Dock is a sheltered berth with 12m depth at chart datum and a quayside of 150m, enabling underwater work with no impact from currents

Berth 5 (NEW) has a depth of 13.5m at chart datum along the centre, shallowing to 12m at either end of the 154m quayside length

A new 154m quayside with 44,000sqm of laydown space opened in December 2015. It was part-funded with help from Highlands and Islands Enterprise and the European Regional Development Fund.

The Port’s additional capacity has led to it’s inclusion in the recently updated “Decommissioning Action Plan” (Scottish Enterprise and Highlands and Islands Enterprise). They identify it as one of the main Scottish ports able to carry out decommissioning work.

Laydown areas:

Berth 5 offers a laydown area of 44,000sqm

Berth 4 offers access to a 10,000sqm laydown area

Queens Dock has a laydown area of 26,000sqm

Ground load-bearing of these areas is capable of accommodating some of the largest structures in the North Sea

The Port offers the services of an established, proven, highly-skilled and locally sourced supply chain, capable of handling:

NORM and asbestos decontamination

Hazardous waste management

Dismantling recovery, reuse and recycling

All the necessary lifting capabilities

PORT OF CROMARTY FIRTH CAPABILITIES

DECOMMISSIONING PROJECTS ALREADY HANDLED BY THE PORT AND ITS SUPPLY CHAIN TO DATE INCLUDE:

Semi-submersible Drilling Rigs: Pentagon 84 and West Venture

Tidal Turbine: Voith Hydro Demonstrator

Wave Turbine: 190-tonne OPT Demonstrator

Subsea: Two Manifolds


The Port of Cromarty Firth’s status as a Trust Port, together with its proven environmental record, ensures that your platform will be decommissioned in a way that meets the latest environmental regulations.

MANAGING THE ONSHORE CHALLENGES

Ongoing programme of stakeholder engagement

Approved contractors will undertake licensed decommissioning activities in accordance with Port of Cromarty Firth procedures and permits

Regular audits and inspections are in place to ensure compliance

An experienced supply chain is already established

NORM storage and disposal capabilities

Hazardous waste management and disposal

Marine growth will be removed first and taken offsite to reduce odours

WAMITAB certified waste experts

Waste separation and storage

Disposal as per recognised waste hierarchy

Recording and reporting of final waste destinations and statistics

Aim for 98% re-use, recovery or recycle

Approved Major Incident and Oil Spill Contingency Plans in place

Building on its success as one of Europe’s leading port facilities for Inspection, Repair and Maintenance (IRM) of offshore energy structures, the Port of Cromarty Firth is already a proven natural choice for decommissioning projects.

SAFEGUARDING OPERATORS’ REPUTATIONS

PLATFORMS DISMANTLED. REPUTATIONS INTACT.

THE PORT OPERATES:

A quality management system which is accredited to quality standard ISO 9001

A Waste Management Plan and Oil Spill Contingency Plan

Under the International Ship and Port Facility Security Code (ISPS)

In compliance with Port Marine Safety Code requirements

6

V

Unlike other ports, the Port of Cromarty Firth has an “open port” philosophy. This allows oil & gas operators and contractors to use the Port’s decommissioning permits. The Port will ensure that all dismantling activities at the Invergordon Service Base are carried out to the highest standard, with the aim of achieving the highest level (98%) of recovery, reuse or recycling.

This multi-user approach gives customers choice and ensures competition for the best cost outcome. In addition, as a Trust Port, 100% of profits are reinvested in the Port’s future development for the benefit of its stakeholders. This approach ensures you receive excellent infrastructure and facilities that adapt to your needs and contribute towards Corporate Social Responsibility (CSR).

OPEN PORT PHILOSOPHY

MOOR UP WITHOUT BEING TIED IN At the Port of Cromarty Firth you’re 100% free to choose the best contractor partners for the job when you bring your next decommissioning project here.

98

V


EXPERIENCED WHERE IT MATTERS We are one of a handful of UK ports with experience of successfully decommissioning offshore structures.

Completed decommissioning experience:

ACCOMMODATING WHERE IT MATTERS At Port of Cromarty Firth you’ll find that our accessible waters and contractor-flexible service base give you more options to decommission your way.

EQUIPPED WHERE IT MATTERS At Port of Cromarty Firth you’ll find a dedicated world-class supply chain able to handle any North Sea decommissioning requirements.

LIFTING SOLUTIONS:

ALE Page 12-13

Mammoet Page 14-15

Osprey HeavyLift Page 16-17

Port of Cromarty Firth Services Page 18-19

James Jack Lifting Services Page 20

Weldex Page 21

WASTE AND ENVIRONMENTAL MANAGEMENT:

John Lawrie Group Page 22-23

Highland Waste Services Page 24

MSIS Page 25

NRC Page 26-27

ENGINEERING AND SUPPORT SERVICES:

Port of Cromarty Firth Services Page 28-29

Rigmar Group Page 30-31

Semco Maritime Page 32-33

SEMI-SUBMERSIBLE DRILLING RIGS:

Pentagon 84 and West Venture

Subsea: Two Manifolds

TIDAL TURBINE:

Voith Hydro Demonstrator

Wave Turbine: 190-tonne OPT Demonstrator

We offer:

Strategic location

Truly year-round access: 24/7/365

Accessible, sheltered waters

80,000m2 open storage area

PORT OF CROMARTY FIRTH

10


Founded in 1983, ALE is one of the world’s leading international heavy transport and installation contractors with a global network of operating centres and a large fleet of heavy cranes, specialist transport and installation equipment.

ALE has more than 30 offices across Europe, the Far East, Africa, America, South America, the Middle East and Australia. ALE delivers a highly tailored, end-to-end service covering every aspect of the handling, transportation and installation of heavy, indivisible loads, including lifting, transporting, installing, ballasting, jacking and weighing.

ALE provides strategic heavy-lift services to a wide range of sectors, including civil, oil & gas, energy, nuclear, offshore, renewables, petrochemical, ports, marine, minerals and metals and mining. ALE’s portfolio demonstrates their capabilities in both ports and the decommissioning sector. ALE works on new build and decommissioning projects, all with a bespoke solution and innovation at the heart of every project.

ALE are fully compliant with international standards of safety and excellence, including quality standard ISO 9001:2015, environmental standard ISO 14001:2015, and health and safety standard OHSAS 18001:2007.

HEAVY TRANSPORT AND INSTALLATION

LIFTING SOLUTIONS

CONTACT DETAILS:

Andrew Stephens

Technical Sales Manager

T +44 (0) 7767 322 432

E [email protected]

www.ale-heavylift.com

OUR CAPABILITIES INCLUDE (BUT ARE NOT LIMITED TO):

Heavy crane lifting and planning

SPMTs and road transportation

Jacking systems

Lifting systems

Skidding systems

Weighing systems

Barge/vessel chartering and logistics

Hydraulic winch and ballast systems

Temporary grillage and support steelwork

Specialist engineering and project management

12

V


Mammoet helps clients improve construction efficiency and optimise the uptime of plants and installations. For that purpose, we provide solutions for lifting, transporting, installing and decommissioning large and heavy structures.

We believe our business is about time: uptime, turnaround time and time to market. To our customers, time is the currency that matters most. That’s why we strive to bring their deadlines forward. It’s an integrated, daily effort shared by everyone at Mammoet, in every aspect of our services: creative engineering, careful planning and safe delivery.

Our services are focused on the petrochemical and mining industries, civil engineering, power generation and offshore projects. The logistic challenges in these industries are growing daily. Factors such as remote locations, harsh climates and a strong emphasis on the environment are constantly driving us towards smarter and safer solutions.

ENGINEERED HEAVY LIFTING AND TRANSPORT

LIFTING SOLUTIONS

CONTACT DETAILS:

T +44 (0) 191 263 9222

E [email protected]

www.mammoet.com

MAMMOET’S SERVICES IN ENGINEERED HEAVY LIFTING AND TRANSPORT COMPRISE:

Heavy lifting

Heavy transport

Plant turnaround / shutdown management

Sitewide construction

Modular construction

Factory-to-foundation / logistics

Rapid response

Relocation and decommissioning

Trading in new and used equipment worldwide

For over two hundred years, we’ve been known for the unique capability of our state-of-the-art equipment. But it’s the trust of our clients that has brought us to where we are today. Their confidence inspires 5,000 Mammoet professionals to give it their all each day and truly make a difference in projects all over the world.

14

V


CONTACT DETAILS:

Matt WoodSales Manager

T 01275 460 608

M 07904 646 747

E [email protected]

www.ospreyltd.com

LIFTING SOLUTIONS

HEAVY LIFT, TRANSPORT & MARINE SOLUTIONS

Osprey HeavyLift provides a range of marine, transportation, lifting, installation and engineering services focused on heavy and abnormal items both onshore and offshore. We are active in oil & gas markets, wind farm construction sites and provide project moves of large engineering modules.

We have particular experience and skills that benefit clients in the key market sectors of:

Oil & gas

Renewable energy

Heavy engineering

Our focus is on understanding our customers’ requirements so that we provide innovative and cost-effective solutions.

Supported by our practical experience, skilled workforce and commitment to delivering on time and on budget projects, we aim to generate multi-contract relationships with our clients.

OUR SERVICES INCLUDE:

Heavy lifting and lift planning

SPMT and road transport trailers

Tug and barge owner

Ship owner

16

V


CONTACT DETAILS:

T 01349 856 410

E [email protected]

www.cromartyfirthservices.co.uk


Crane and operator hire

The provision of qualified slingers, banksmen and lift supervisors

24 x 7 x 365 operation

LIFTING AND CRANE SERVICES

LIFTING SOLUTIONS

Port of Cromarty Firth Services owns and operates 90 tonne and 130 tonne Liebherr mobile cranes which provide efficient lifting solutions to customers at the Invergordon Service Base.

The cranes are fully serviced, tested and certified by Liebherr’s local representative. The cranes can be supplied on both a CPA hire and CPA contract lift basis; all lifting solutions are fully compliant with LOLER regulations.

The company can react immediately to the crane and lifting requirements of any decommissioning operator looking to deliver their project in the Firth.

18

21P O R T O F C R O M A R T Y F I R T H S U P P O R T I N G T H E N O R T H S E A E N E R G Y I N D U S T R YP O R T O F C R O M A R T Y F I R T H S U P P O R T I N G T H E N O R T H S E A E N E R G Y I N D U S T R Y20

LIFTING SOLUTIONS

James Jack Lifting Services – lifting solutions and crane services.

James Jack Lifting Services is the northern Scottish division of Ainscough Crane Hire. Established in 1970, with depots in Invergordon, Aberdeen, Dundee and a wider support network of a further 27 depots to draw upon, we are the UK market leader. When our customers think of James Jack they think quality, reliability, flexibility, expertise, outstanding QHSE, people that meet deadlines and have a “can do” attitude.

Group Ainscough is the collective of James Jack Lifting Services, Ainscough Crane Hire, Ainscough Heavy Cranes Division and Ainscough Wind Energy Services (AWES).

Adjacent to the Port of Cromarty Firth Services base, we have a 24/7 permanent crane fleet presence with skilled Crane Operators, Slinger/Signallers, Appointed Persons and Contract Lift Managers, all offering an unsurpassed service.


Best in class fleet of 460 cranes, from seven tonnes to 1,000 tonnes

95% fleet availability

Crane hire, contract lift or heavy lift expertise

Full lift planning and CAD capabilities

Rigorous QHSE programme driving safety and reliability

ISO 9001, 14001 and 18001 accreditation

CONTACT DETAILS:

T 0845 113 0480

E [email protected]

www.james-jack.co.uk

LIFTING SOLUTIONS

Weldex is the largest crawler crane hire company in the UK.

Our cranes range from five tonnes to 1350 tonnes lifting capacity and are supplied throughout the UK and overseas on both CPA hire and CPA contract lift basis. Over the past 30 years, we have established a global reputation for executing challenging lifts both on and off shore.

Our crawler crane fleet is supported by a large fleet of Scheuerle SPMT units and is also complemented by a large selection of loose rigging for hire, ranging from spreader beams, wire rope slings and shackles up to 1,000 tonnes.

Today we are not only the first choice in the UK for crane hire, we are the first choice internationally when specialist equipment, experienced personnel and engineered solutions are required for heavy or complex lifting operations.


Crane hire

Crane and operator hire

Contract lift service

Manufacture and supply of lifting equipment

Test, examination and repair of lifting equipment

CONTACT DETAILS:

T 01463 220 333

E [email protected]

www.weldex.co.uk


CONTACT DETAILS:

T +44 (0) 1224 871844

F +44 (0) 1224 898053

E [email protected]

www.johnlawrie.com

WASTE AND ENVIRONMENTAL MANAGEMENT

The John Lawrie Group has been successfully carrying out decommissioning projects involving the dismantling of large oilfield and subsea structures for more than two decades.

Our primary objective is to maximise reuse and recycling, and minimise disposal. To this end, our processing methods result in high recovery and recycling rates for a wide range of materials, in most cases up to 100%.

It’s all about sustainability and, with legislation growing progressively tighter along with the increasing development of zero waste strategies, the need for a smarter approach to decommissioning is unequivocal.

EXPERTISE, EXPERIENCE AND CONTINUOUS INNOVATION

John Lawrie Decom’s expertise and experience in the downsizing, deconstruction, processing, reuse and recycling of a wide range of subsea materials enables us to provide a single integrated package for clients.

This includes excellent working relationships with port operators and a subsequent ability to collect and/or receive redundant materials from a variety of onshore geographic locations.

With sustainability in mind, John Lawrie Decom has progressively developed its expertise in the deconstruction, processing, recycling and disposal of a range of subsea materials including flexible risers and flowlines, umbilicals, manifolds, christmas trees, mid-water buoys, mooring systems, protection structures, concrete mattresses and other associated items.

Provision of specialist trucks, lifting and cutting equipment and a fully mobile, well-trained workforce, as well as a highly innovative approach to project management and logistics means decisions are made quickly and jobs expedited efficiently.

A SUMMARY OF OUR CAPABILITIES INCLUDES:

Onshore decommissioning service

Fully-integrated proposal including NORM decontamination and disposal

Piece small to medium items

Access to quayside dismantling facilities throughout the UK

Licenced waste treatment facilities throughout Scotland

Size reduction service at quayside

Skilled and mobile workforce

In-house HSEQ support service

Provision of specialist trucks, lifting and cutting equipment

Excellent track record

Reuse and recycling specialists

Accredited ISO 18001, 14001 & 9001 management systems

EXPERTISE, EXPERIENCE AND CONTINUOUS INNOVATION

22

25P O R T O F C R O M A R T Y F I R T H S U P P O R T I N G T H E N O R T H S E A E N E R G Y I N D U S T R YP O R T O F C R O M A R T Y F I R T H S U P P O R T I N G T H E N O R T H S E A E N E R G Y I N D U S T R Y24

CONTACT DETAILS:

T 01349 853660

E [email protected]

www.highlandwasteservices.co.uk


Highland Waste Services, established in 1996, are a well-known local company providing comprehensive waste management for businesses of all sizes across the north of Scotland. The company has steadily grown its workforce and, following their acquisition of an additional site in Evanton, they now employ some 30 members of staff.

Based in the deep port town of Invergordon, Highland Waste Services (HWS) offers professional waste and recycling solutions, including metal recycling, to both the public and private sectors. This includes renewable energy companies, on and offshore oil companies, retail establishments and companies in the aquaculture sector. HWS also offers waste management services to seasonal cruise ships visiting the busy port.

HWS provides an extensive choice of practical and easy-to-use skips and wheelie bins, suitable for a wide range of waste types. They are available in a variety of sizes and types (both open and closed) ranging from 240ltr to 1100ltr wheelie bins and 4 cubic yards to 40 cubic yards skips. HWS have a large fleet of waste carrier vehicles to cater for any situation. We pride ourselves on our ability to provide a one-stop service for waste management.

Gary Howard, Director at HWS, said: “We’ll handle all waste streams, including specialist waste, often working in partnership with other local companies to help provide this “one stop” total waste management package for our clients.

HWS works extremely closely with the Port of Cromarty Firth to ensure that the waste services they are able to offer their visitors and port users are to the highest standards. We feel that as we move ever closer towards decommissioning, the Port of Cromarty Firth will be the “go to” location for such services and Highland Waste Services look forward to working alongside them every step of the way.”

Environmental management

CCTV inspection surveys

Rig maintenance

Specialist cleaning

FPSO deep tank cleaning

Oil spill response

Separator cleaning

Vacuum transfer and pumping solutions

Waste management

NORM decontamination

Specialist coatings

Emergency response teams

WE PROVIDE:

MSIS has a proven track record of safety and efficiency in high profile projects over the last 18 years in both onshore and offshore markets.

We combine innovation, safety, training and market leading equipment to create a tailor-made service solution for every client.

By nurturing long-term relationships, we enable our clients to deliver their environmental legislative compliance needs, whilst improving performance and waste efficiency.

MSIS is the first choice for environmental services and equipment. We operate both onshore and offshore serving specialist industries including; oil & gas, utilities, distilling, construction and civil engineering. From our Invergordon and Aberdeen locations, we are in the best position to work closely with our clients, who demand the very highest levels of response and expertise.

CONTACT DETAILS:

T 01349 854 454 INVERGORDONT 01467 673 900 INVERURIEE [email protected]



CONTACT DETAILS:

T 01651 869349

E [email protected]

www.nrcc.com


DECOMMISSIONING SERVICES

Formerly known as Sureclean, NRC’s core services and expertise is readily exportable to offshore markets worldwide and accordingly we have grown a diverse client base and formed excellent long standing trading relationships with major customers in support of industry.

Supporting both current and future decommissioning/dismantling projects onshore and offshore, our capabilities and experience extend to and include project management and technical support.

In support of subsea abandonment, NRC work closely with recognised industry leaders providing both equipment and manpower for the abandonment decommissioning of subsea and marine infrastructure, including pipeline end terminals (PELTs), conductors and platform, jacket, template piles. Our trained and experienced personnel form part of a multi-skilled integrated team delivering a safe and efficient project delivery.

Adopting the same principals and approach, NRC provide the solutions to decommissioning projects across industry including:

Asbestos survey, sampling and removal from nuclear facilities

Cleaning, dismantling and removal of redundant tanks, vessels and pipe work from petrochemical refineries

Cleaning, dismantling and removal of redundant processing systems within turbine petrochemical refineries

Cleaning and dismantling of redundant processes within distilleries


Oil spill response

HAZMAT response

Emergency response consultancy

Emergency response training

Water jetting

Waste management

Tank and vessel cleaning

Tank management and safety support

Vacuum transfer and pumping solutions

Asbestos survey and removal

Industrial painting

NORM management

26

V


FULL QUAYSIDE SUPPORT

CONTACT DETAILS:

T 01349 856 410

E [email protected]

www.cromartyfirthservices.co.uk

COMPREHENSIVE QUAYSIDE SUPPORT INCLUDES PROVISION OF:

Project management

Administrative support

Ships agency

Stevedoring

Crane and lifting services

Messing

Transport

Warehousing

Project office accommodation

ENGINEERING AND SUPPORT SERVICES

Port of Cromarty Firth Services provides full quayside support in the strategically located Port of Cromarty Firth.

Agency and support services are offered by an experienced team. All core quayside staff are OPITO accredited.

Port of Cromarty Firth Services is an independant supply chain services company operating at the heart of the Port of Cromarty Firth and is best placed to deliver comprehensive quayside support to our customers when they choose to fulfil their projects at the Invergordon Service Base.

The company offers customers a range of modern facilities on the Service Base, which include a 150-seater canteen, laundry facilities, washroom and lockers.

Port of Cromarty Firth Services works collaboratively with other locally based, internationally recognised companies to ensure a seamless project experience. Customers want us to be flexible and have a supply chain capability which will support their needs. We can supply a full project management team, document controller, quayside co-ordinators and a range of administrative support.

Working together, Port of Cromarty Firth Services will help you plan and offer you innovative and bespoke solutions for all areas of your logistics.

28

V


INTEGRATED SOLUTIONS

CONTACT DETAILS:

T 01224 243 000

E [email protected]

www.rigmar.co.uk


Operating across a range of markets, the Rigmar Group, comprising Rigmar Services and Interocean Marine Services, provides a comprehensive range of services, delivering the highest standard of service from design through to execution.

Rigmar Services is a single source provider of support services to clients throughout the asset lifecycle. Our in-house engineering and design, inspection, coatings, specialist access, fabrication, construction and accommodation divisions work together to provide a comprehensive solution to asset integrity and maintenance requirements to the offshore oil & gas, offshore renewables, drilling, marine, civils and decommissioning sectors.

Interocean Marine Services offers a complete range of specialist marine services in various aspects of marine, offshore drilling and production operations. Interocean provides marine consultancy, project management, naval architecture and engineering, survey and positioning and mooring equipment rental services, in support of rig moves, FPSO mooring and hook-up, wave energy convertor deployment and wind turbine installation.

Together, Rigmar and Interocean provide an integrated solution from installation to operational maintenance, and continuing until decommissioning. This ability to provide services throughout an asset’s lifecycle can create value through the delivery of safe, efficient and cost-effective services.

RIGMAR SERVICES:

Engineering and design

Inspection and certification

Coatings

Specialist access and scaffolding

Fabrication

Construction

Accommodation

Drilling facilities

Project management

INTEROCEAN SERVICES:

Marine consultancy and rig move services

Mooring installation and equipment rental

Marine engineering and design

Survey and positioning

Risk management

Project management

30

V


CONTACT DETAILS:

T 01224 223 965

E [email protected]

www.semcomaritime.com


COMPREHENSIVE PROJECT MANAGEMENT

Dedicated to the energy sector, Semco Maritime is an international contracting and engineering company.

For more than 30 years we have been facilitating design, fabrication, service and maintenance of our customers’ assets, providing comprehensive project management across all phases of energy projects. From turnkey engineering solutions to operation support and delivery of components, systems and solutions, we make sure our customers and partners in the energy sector experience safe, cost efficient operations. Semco Maritime has branches in Denmark, Norway, UK, Dubai, Singapore, Vietnam, Australia, Central America and USA.

We have diversified our services and project management offering to now also include marine/vessel repair and upgrades, as well as our activities in decommissioning, specialising in the full recycling process for both mobile and fixed assets/structures returning from many years in the North Sea. In partnership with Port of Cromarty Firth and the local supply chain we have the capability to manage and execute a turnkey project safely, with full appreciation of local environmental sensitivities.

We offer efficient and experienced project managementfor all sizes of projects:

Decommissioning/recycling of oil & gas assets

Marine/vessel upgrade and maintenance

Process control including Ex maintenance

Accommodation including new building and refurbishment

Safety equipment upgrades and installation

HVAC installation and upgrades

Fire detection, firefighting and telecom systems

Mud tanks and pump systems

Power management and systems

Drilling package maintenance and replacement

Scaffolding and rigging

Offshore inspections and surveys

Construction and fabrication

Installation of third party equipment

WE OFFER A COMPLETE IN-HOUSE FRONT-END ENGINEERING PACKAGE. OUR SKILLS INCLUDE:

Global asset management

SPS and out of service planning and execution

Mechanical, structure and piping engineering and calculations

Feasibility studies and conceptual design

Marine and subsea operations

32

The naturally-sheltered waters of the Cromarty Firth guarantee 24/7/365 access and egress for a quick turnaround.

Port of Cromarty Firth has a track record for decommissioning projects, delivered by a world-class supply chain and a highly skilled workforce.

THE SAFE HAVEN FOR DECOMMISSIONING

3534

Port Office, Shore Road, Invergordon IV18 0HD

T 01349 852 308

E [email protected]

www.cfpa.co.uk

NORWAYUK

OILFIELDS

PORT OF CROMARTY

FIRTH

SUPPORTING THE NORTH SEA ENERGY INDUSTRY

Documents

Transcript of SUPPORTING THE NORTH SEA ENERGY INDUSTRY