Steel Structure and Piping Supply Chain of EPC ... - SUNLION

18
SunLion Korea (尚林国际*韩国) Add.:#D205 Environmental Industry Research Complex 410 Jeongseo- jin-ro, Seo-gu, Incheon, Republic of Korea. Email : [email protected] SunLion India (尚林国际*印度) Add.:25-C,Sonarika Apartment Basement,Office No.16-A, Mubai-400004.Maharashtra. Email : [email protected] SunLion Indonesia (尚林国际*印尼) Add.: Metro Sunter Apartment 108,Sunter Jakarta 14340,Indonesia. Email : [email protected] SunLion Head Office (尚林国际总部) Add: Floor18, No.928 Yierba Jinian Rd (Wanda Plaza, Bld2) Baoshan District, Shanghai, China 中国上海市宝山区一二八纪念路928号万达广场2号楼1808-1812室 Tel: +86-21-6173 5712 E-mail: [email protected] Sales Dept: [email protected] SunLion North America (尚林国际*加拿大) Add.: 4255 Arbutus Street,Unit #147,PO Box 62025, Vancouver, Canada Email : [email protected] www. sunlionpiping .com www.sunlionmetals.com www.sunlionpiping.com Steel Structure and Piping Supply Chain of EPC Projects EPC 项目*钢结构与管道集成供应链 SunLion Thailand (尚林国际*泰国) Add.: No.2010, 20F, Le Concorde Tower, Ratchadapisek Road , HuaiKwang District, Bangkok 10310,Thailand Email : [email protected] SunLion Australia (尚林国际*澳洲) Add: 1707 Post Oak Blvd.,#449 Houston, TX 77056 Tel:+001(832) 598 4456 E-mail: [email protected] SunLion Thailand Factory (尚林国际*泰国工厂) PETROLEUM EQUIPMENT (THAILAND) CO., LTD. Add.: 7/522 Moo.6 Mabyangporn, Pluakdaeng, Rayong 21140,Thailand. Email : [email protected] www.sunlionmetals.com SunLion Shanghai Stock Base 上海鼎建管道工程有限公司 SunLion Tianjin Stock Base 沧州尚林管道工程有限公司 SunLion R&D Center 江苏尚大海洋工程技术公司 SunLion CNAS Laboratory 尚林(苏州)CNAS检测实验室

Transcript of Steel Structure and Piping Supply Chain of EPC ... - SUNLION

SunLion Korea(尚林国际*韩国)Add.:#D205 Environmental Industry Research Complex 410 Jeongseo-jin-ro, Seo-gu, Incheon, Republic of Korea.Email : [email protected]

SunLion India(尚林国际*印度)Add.:25-C,Sonarika Apartment Basement,Office No.16-A, Mubai-400004.Maharashtra.Email : [email protected]

SunLion Indonesia(尚林国际*印尼)Add.: Metro Sunter Apartment 108,Sunter Jakarta 14340,Indonesia.Email : [email protected]

SunLion Head Office (尚林国际总部)Add: Floor18, No.928 Yierba Jinian Rd (Wanda Plaza, Bld2) Baoshan District, Shanghai, China中国上海市宝山区一二八纪念路928号万达广场2号楼1808-1812室Tel: +86-21-6173 5712E-mail: [email protected] Dept: [email protected]

SunLion North America (尚林国际*加拿大) Add.: 4255 Arbutus Street,Unit #147,PO Box 62025, Vancouver, CanadaEmail : [email protected]

www.sunlionpiping.com www.sunlionmetals.com

www.sunlionpiping.com

Steel Structure and Piping Supply Chain of EPC Projects

EPC 项目*钢结构与管道集成供应链

SunLion Thailand (尚林国际*泰国) Add.: No.2010, 20F, Le Concorde Tower, Ratchadapisek Road , HuaiKwang District, Bangkok 10310,ThailandEmail : [email protected]

SunLion Australia (尚林国际*澳洲)Add: 1707 Post Oak Blvd.,#449 Houston, TX 77056Tel:+001(832) 598 4456E-mail: [email protected]

SunLion Thailand Factory (尚林国际*泰国工厂)PETROLEUM EQUIPMENT (THAILAND) CO., LTD. Add.: 7/522 Moo.6 Mabyangporn, Pluakdaeng, Rayong 21140,Thailand. Email : [email protected]

www.sunlionmetals.com

SunLion Shanghai Stock Base上海鼎建管道工程有限公司

SunLion Tianjin Stock Base沧州尚林管道工程有限公司

SunLion R&D Center 江苏尚大海洋工程技术公司

SunLion CNAS Laboratory尚林(苏州)CNAS检测实验室

SUNLION01 SUNLION 02

03 Brief Introduction

06 Accreditations & Qualifications

CONTENTS

25 Why Us

07 Products & Services

31 Main End Users

17 History Projects

目录

公司简介

认证与资质

产品与服务

工程业绩

核心竞争力

主要客户

Sunda, integrating R&D with manufacture, has complete production line, advanced testing & inspection equipment and a galaxy of experienced and profes-sional technical personnels. Focusing on the development and manufacture of corrosion-resistant materials and anti-corrosion materials applied to offshore constructions and delivering professional training in all aspects of engineering, welding and HSE.尚林南通研发中心(Sunda)是集研发与制造于一体,拥有完整的生产线、先进的检测检测设备和一批经验丰富的专业技术人员。通过专注于开发和生产适用于离岸建筑的耐腐蚀材料和抗腐蚀材料以及提供工程、焊接和HSE方面的专业培训。

Vision / 愿景Make EPC Projects Procurement More Effective !

让EPC项目采购更有效果!

Mission / 使命

BRIEF INTRODUCTION

SUNLION03 SUNLION 04

SunLion Group is devoting to be one of the respected global Piping and Steel Structural Modules Providers to Oil & Gas transportation, Refinery & Chemical, Quay wall and Berth, Marine & Offshore, Nuclear & Wind Power,Mining markets with our unique, integrated approach that enables us to deliver modular solutions to world leading Energy Companies and EPC contractors.尚林集团致力于成为一家受人尊敬的全球管道和钢结构模块服务商,在石油和天然气运输、炼油和化工、海工码头、核能和风能、矿业领域,为世界领先的能源公司和EPC总承包商提供一站式、模块化的解决方案。

Throughout more than 15 years efforts in the international markets, SunLion has successfully entered into Mid-east, Australia, America, Africa and Europe markets, providing piping system materials and serving for SIEMENS, SABIC、KOC,ADNOC, TITAS,GTCL,EIL,BHEL, FLUOR,VINCI, NNPC,TECHNIP, PETRONAS, PDVSA, SHELL, ODEBRECHT,MCCONNELL,VOPAK、SUMSUNG、SK、GS、etc.

Combined with Chinese top-class manufacturer and international engineering teamSunLion has become professional Steel Structure & Piping Module ProviderSunLion can provide pre-fabricated piping system spool and skid/structure module & the whole solution service

Established long-term strategic relationship with the pipe mills of CNPC BSG Group, Valin , CITIC, Baosteel , and NISCO ,SunLion has become the top class Steel Structure and Piping Material Exporting Supplier in China. SunLion can supply Steel Structure/SMLS/Welded/OCTG pipe & Fitting/Flange/Valve & Stainless Products.

SUNLION R&D CENTER

WHERE ARE WE FROM

经过超过15年的国际市场打拼,尚林已成功进入中东、澳大利亚、美国、非洲和欧洲市场,为西门子、沙特基建、科威特石油、阿布扎比石油、TITAS、GTCL、印度工程公司、印度电力、通用、福陆、万喜、尼日利亚石油、德希尼布、巴西石油、委内瑞拉石油、壳牌、ODEBRECHT、麦德建筑、VOPAK、SUMSUNG、SK、GS等提供管道系统材料和服务。

联合中国高端制造和国际工程团队,使得尚林已成长为一家专业的钢结构和管道模块服务商,可以提供管道预制系统、钢结构模块和整体解决方案。

与中石油宝鸡钢管集团、华菱钢管集团、中信泰富特钢集团、宝钢、南钢建立长期战略关系,使得尚林已成长为中国顶级钢结构和管道材料出口供应商,可提供钢结构/无缝管/焊接钢管/石油套管/管件/法兰/阀门及不锈钢制品。

Building an Excellent Supply Chain through Integrating Engineering, Production, QA, QC and Logistics to Serve Global EPC Contractors !

整合工程设计、生产、质保、质检及物流,打造服务国际EPC总承包商的卓越供应链!

江苏尚大海洋工程技术公司

SunLion Testing Laboratory (Suzhou) is a company with CNAS qualification certifica-tion, have all kinds of testing instrument and auxiliary equipment more than 70 sets, use a fixed area 2000 ㎡, is a company established in strict accordance with ISO/IEC17025 standards set metal materials test, high polymer material test, reliability test, fatigue test, nondestructive testing, all kinds of non-standard custom test for the integration of industrial products testing laboratory.尚林(苏州)检测实验室是一家拥有CNAS资质认证的公司,拥有各类检测仪器及辅助设备70余台,固定使用场地2000㎡,是一家严格按照ISO/IEC17025标准建立的集金属材料试验、高分子材料试验、可靠性试验、疲劳耐久试验、无损检测、各种非标定制试验为一体的工业品检测实验室。

SUNLION CNAS LABORATORY尚林(苏州)CNAS检测实验室

公司简介

SUNLION05 SUNLION 06

ORGANIZATION STRUCTURE DIAGRAM

>Globle Marketing>Company Management>Overall Strategy>Contract Negotiation

>Quality Control Management>Responsible for R&D Center - Sunda>Project Operation

>Financial Management >Human Resource Management>Administration Management

>Project Quality Control>QA & QC

>Purchase>Trade Document>Logistics

>Project Technical Support>Study Anti-Corrosion products

>Steel Structure Module Fabrication>Piping Module Fabrication>Piping Material Package Supply>Coating Service>Third Party Inspection Service>SunLion Shanghai Stock Base>SunLion Tianjin Stock Base

Vice GeneralManager

Vice GeneralManager

QualityDepartment

R&DCenter

SalesDepartment

>Material Re-test>Mechanical Test>Chemical Test>HIC/SSC Test>NDT Test

TestingLaboratory

Project OperationDepartment

Board of Supervisors

Managing Director

Shareholder Meeting

Board of Directors

Chairman of Board

>Daily Routine>Human Resource Management

>Budget (Company&Project)>Internal Audit>Financial Operation

AdministrationDepartment

FinancialDepartment

HRDepartment

组织架构图认证与资质

ACCREDITATIONS & QUALIFICATIONS

SUNLION07 SUNLION 08

Welded Pipe

Seamless Pipe

OCTG

Valve

Fitting & Flange

Coating Service

Stainless Pipe

Piping Module

Steel Structure Module

Sheet Pile & Pipe Pile

管道模块

钢结构模块

钢板桩、钢管桩

不锈钢管

焊接钢管

无缝钢管

石油套管

管件、法兰

阀门

防腐产品

PRODUCTS & SERVICESPRODUCTS & SERVICES产品与服务

Module ProductsSteel Structure Module

Module ProductsPiping Module

SUNLION09 SUNLION 10

SUNLION combine prefabrication, detail engineering and extra services into complete solutions for both onshore and offshore installations in the chemical, power, oil & gas and other markets. Besides the specialized prefabrication of piping, SUNLION integrate multiple disciplines into the construction of modules and skids.

尚林将预制、详图设计和额外服务结合起来,为化工、电力、石油天然气和其他市场的陆上和海上设施提供完整的解决方案。除了专注于管道预制,我们还将多个学科集成到模块和橇块的构建之中。

尚林为不同行业的客户提供预制和模块化施工服务,包括离岸(深水、海底)、在岸(炼油厂、液化天然气、化学品)、基础设施、电力和公用事业、采矿等领域。

SUNLION provides fabrication and modular construction services to Clients in diverse industries including Offshore(Deep-water ,Subsea ),Onshore(Refineries, LNG, Chemicals), Infrastructure , Power & Utilities, Mining, etc.

SUNLION’s mill is designed for large-scale module fabrication with dedicated facilities including:

• Steel Fabrication Fabricated steel is cut and assembled to project design requirements in the state-of-the-art steel cutting workshop.

• Structural Welding All welding is conducted in this new facility to project-engineering specifications.

• Blast & Painting After steel cutting and fabrication, items are sent to blasting and painting buildings, which have a climate-controlled and vacuum cleaning system for efficient processing.

SUNLION can supply the structure modules such as Jackets, Berthing Dolphins, Mooring dolphins, Bridge etc.

Advantages in Piping Module:

• Quality of the work is easier to manage & maintain in a controlled environment. High accuracies on specified tolerances will avoid rework at site.

• Weather independent fabrication will minimize production delays.

• Prefabricated Spools are the perfect answer to severe skill & labor shortage. Users do not have to mobilize significant work force for fabrication of spools on site.

• Manufacturing in mass production, will result in lower manufacturing costs compared with site fabrication. Better control on welding parameters in controlled environments resulting in lesser probability of rework at site.

• Prefabricated Spools will entail no or little investments in fabrication & testing equipments by users. Radiography, PMI, MPI, Ultrasonic tests, Hydro tests etc. can be performed better & effectively in controlled environments.

• Prefabricated Spools will be serviced under the strict vigilance of Third Party Inspection Agencies, ensuring 100% adher-ence to required quality standards.

• Improved safety in better manufacturing conditions than on site. Also, fabricating spools off site means less slag, abrasive dust, smoke & other contaminants which are unacceptable in highly hygienic food processing & other industries.

/ 管道模块/ 模块产品

/ 钢结构模块/ 模块产品

Welded Pipe ERW / HFW Pipe

0.6mm-19.9mm(0.024”-0.783”)

API PSL1: A, B, X42-X70API PSL2: BM, X42-X80MEN:S235-S450

DIN 30670/30678, CSA Z245, AWWA C210

EN:S235-S450

DRL

GB/T 9711,API Spec 5L,ISO 3183, GB/T 3091 ,EN10220,EN10217,DIN 1626, DINB2458,JIS G3445,JIS G3444,BS1387, AS/NZS 1163 and other technical require-ment by end-user.

21.3mm-660mm(1/2”-26”)

Standards

Diameter

Wall Thickness

Length

Coating

DIN 30670/30678, CSA Z245, AWWA C210

DIN 30670/30678, CSA Z245, AWWA C210

Steel Grade

Standards

Diameter

Wall Thickness

Length

Coating

Steel Grade

Standards

Diameter

Wall Thickness

Length

Coating

Steel Grade

GB/T 9711,API Spec 5L,ISO 3183, GB/T 3091 ,EN10220,EN10217,DIN 1626, DINB2458,JIS G3445,JIS G3444,BS1387, AS/NZS 1163 and other technical requirement by end-user.

219mm-3505mm (8”-138”)

5mm-25.4mm (0.2”-1”)

6m-80m

API PSL1: A, B, X42-X100API PSL2: BM, X42M-X100M

SSAW / SAWH Pipe

GB/T 9711,API Spec 5L,ISO 3183, GB/T 3091 ,EN10220,EN10217,DIN 1626, DINB2458,JIS G3445,JIS G3444,BS1387, AS/NZS 1163 and other technical requirement by end-user.

457mm – 3500mm(18”-138”)

6mm-120mm(0.236”-4.72”)

API PSL1:A,B,X42-X100API PSL2:BM,X42M-X100MASTM:A139,A252,A53,A572,A671,A672,A691EN:S235-S450

2.5m-12.2m

LSAW / SAWL Pipe

/ 管道模块

SLZ/SLU/SLHZ/SLOZ/SL Straight series

EN10248/EN10249

457mm-2000mm

ERW/SSAW/LSAW

Sheet Pile

Design

Type

Design

Pipe Pile

6mm-2200mm

Ferritic,(Super )Austenitic, (Super)Duplex, Corrosion & High Temperature Resistant Alloys,Clad,Titanium,Nuclear Grade

0.5mm-80mm

Hot Piercing, Hot Extrusion, Cold Finished

Sour Service, NACE MR0175/ISO15156, NACE MR0103

Diameter

Material

Wall Thickness

Service

Delivery Condition

Sheet Pile & Pipe Pile

Stainless Pipe

SUNLION11

/ 钢板桩、钢管桩 / 焊接钢管

/ 不锈钢管

Standards

/ 高频电阻焊接钢管

/ 螺旋埋弧焊接钢管

/ 直缝埋弧焊接钢管

1/4”-120” ,ASME 150LB-2500LB

CS, S/SS, S/DSS, Al/Bronze, Inconel, Hastelloy, Monel, other Alloys, CI, DI

HP/HT/Cryogenic/Corrosive/Abrasive/Oxygen/Vacuum/ESD Service, Dual Certified 316/L, Fully Killed CS, CRA Cavity Overlay, Norsok M650, FET(ISO/SHELL/TA-LUFT), HP Gas Shell Test/TAT, EN1024 3.2, FBE, etc.

Ball/Gate/Globe/Check/Butterfly/Plug/Needle/Diaphragm/Lined Valve, Strainer, etc., Diverse Construction, Forged or Casted, Manual or Actuator Operated

API, BS, ISO, ASME, AWWA, MSS SP, DIN

Type

Size & Pressure

Optional Requirements

Material

API,EN,ASTM,DIN,BS,JIS,GB

ABS/BV/LR/DNV/GL/KR,EN10204 3.2MTC

Sweet Service, Sour Service,Anti-H2S ,NACE MR 0175/ISO15156

A234/A182/A105/A350/A430/A860/A694/A815

Hot Forming, Welded by Plate, Cold Forming, Forging by bar

API,EN,ASTM,DIN,BS,JIS,GB

ABS/BV/LR/DNV/GL/KR,EN10204 3.2MTC

Sweet Service, Sour Service,Anti-H2S ,NACE MR 0175/ISO15156

Forging by bar

A182/A105/A860/A694

Standards

Fitting

Produce Process

Available Approved Marine

Special Service

Steel Grade

Standards

Flange

Valve

Fitting & Flange

Produce Process

Available Approved Marine

Special Service

Steel Grade

Standards

2.77mm-120mm(0.109”-4.72”)

API PSL1/PSL2:A,B,X42-X100ASTM A53/A106:Grade A,B,C;A333:Grade1-Grade8;A335:P1-P92EN 10210/10219/10216:S235-S460,P195GH-16Mo3DIN1629/17175,JIS G3454/3455/3456

2m-24m

NACE MR0175/ISO 15156

API 5CT, API 5L, API 5B, API RP 5C5

114.3mm-508mm(4 1/2”-20”)

5.21mm-16.13mm(9.50ppf-133ppf)

H40,J55,K55,N80,L80,C90,C95,T95,C110,P110,Q125

API 5CT, API 5B, API RP 5C5

48.26mm-114.3mm(1.9”- 4 1/2”)

3.18mm-16mm(2.4ppf-26.1ppf)

H40,J55,K55,R95,N80,L80,C90,C95,T95,P110,Q125

API 5DP, API 7-1, NS-1, DS-1

60.32mm-168.28mm(2 3/8”-6 5/8”)

7.11mm-27mm(6.65ppf-74.62ppf)

E,X,G,S

API Spec 5L, ASTM and other technical requirements by the end user.

21.3mm – 914mm(0.5”-36”)

Standards

Diameter

Wall Thickness

Length

Sour Service

Steel Grade

Standards

Casing

Tubing

Drill Pipe, Collar, HW Drill Pipe

Diameter

Wall Thickness

Steel Grade

Standards

Diameter

Wall Thickness

Steel Grade

Standards

Diameter

Wall Thickness

Steel Grade

Seamless Pipe

OCTG

SUNLION13 SUNLION 14

/ 无缝钢管 / 管件、法兰

/ 阀门

/ 石油套管

SUNLION15 SUNLION 16

Coating

Concrete Weight Coating

Coating characteristics

Advantage

Raw Material Inspection

Offline Inspection

Concrete tensile strength

Concrete Density BS EN12390-7

Water absorption rate BS EN12390-3, BS 1881-122

Shear adhesion

Diameter 8”- 48”

Wall Thickness 40mm-180mm

Length 6m-18m

High Density

Welded Joint

Sea Sleeve orDeep Sea Sleeve

or DensiflexPolyurethane Foam

Concrete,FBE,PP,or PE Coated Pipe

External Pipe CoatingDiameter 60mm-2600mm (2.36”- 102.36”)

Coating Type FBE, 2PE, 2PP, 3PE, 3PP

Standards CSA Z245.20-02, SY/T0315-2005, Q/CNPC 8-2002, GB/T 23257-2009, DIN 30670-1991, DIN 30678-1992, SY/T 0413-2002, Q/SY XQ 8-2003, Q/SY XQ 9-2003, CSA Z245.21-02 and other additional technical requirements by end users.

Internal Pipe CoatingDiameter 114mm-2600mm (4.49”- 102.36”)

Coating Type with liquid coating materials

Standards API RP 5L2-2002, SY/T 4057-2000, SY/T 0442-2010, Q/SY XQ 10-2003, Q/SY XQ 11-2003 and other additional requirements by end users.

The processing scope of internal coating covers from 4.49” to 102.36”, and external coating covers from 2.36” to 102.36” with world advanced highty automatic equipment.

The CWC provide the necessary negative buoyancy during pipeline installation and operation and also provide the necessary mechanical protection for the offshore pipeline coatings.The CWC system consists of iron ore aggregate, sand, cement, water and reinforcing material.

CWC can make the pipelines stably maintained in the sea bed, meanwhile offer effective mechanical protection. During production, determination of the different layer density is according to the project technical specifications.

Compared with the pipe-in-pipe, the CWC coating save more steel, reduce the labor intensity during pipline installation and construction as weel as saving operation cost.

ASTM C136, ASTM C117, ASTM C142, ASTM C40, ASTM C123, ASTM C70, ASTM C128, ASTM C127, ASTM C150, BS 12, ASTM A185, ASTM A82, ASTM C171, ASTM C309.

ASTM C39, BS EN12390-3, BS EN12390-2 (Making and curing)BS EN12390-1 (Specimens dimension)

PESteel Pipe

FBEFBE Coating

PE/PP Coating

Liquid EpoxyCoating

Concrete WeightCoating

Insulation Coating

Marine Corrosion

Cement Lining

Steel Pipe

Steel Pipe

Steel Pipe

Steel Pipe

Steel PipeMarine Corrsion

Steel PipeCement

Anti-Corrosion Coating

Concrete Layer

HDPE (High Density-Polyethylene Pipe)End SealPolyurethane Insulation Layer

AdhesiveFBE

FBE

Internal Liquid Epoxy

Bare pipe

External FBEOutside anti-corrosion countermeasure

Adhesive(Copolymer)Binding roll berween outer layer(PE/PP)and inner layer(FBE)

PE/PP top coatMechanical and functional protection

Inside anti-corrosion countermeasure

/ 防腐产品

/ 混凝土配重涂层

SUNLION15 SUNLION 16SUNLION17 SUNLION 18

WEBB DOCK PORT

工程业绩

HISTORY PROJECTSHISTORY PROJECTS

Project Location: AustraliaClient: MCCONNELL.Contract Duration: 10 MonthsSupply Description: SSAW PIPE PILES, AS 1163 C350LO within UHB coating, Diameter is 914mm-1524mm , 22000Mtons.

FPSO P75&P77 PROJECTEnd User: Petrobras.Location: BrazilDuration: 5 MonthsDescription: SMLS PIPES, ASTM A312 TP304/ASTM A333 GR.8/API 5L GR.B , Diameter is 21.3mm-323.9mm , 1117 Mtons.

DUSLO PROJECTEnd User: Technip.Location: ItalyDuration: 10 MonthsDescription: SMLS PIPES, ASTM A335 P11, P22, A333 Gr.6 , Diame-ter is 168.3mm-406.4mm , 1866Mtons.

PDVSA OIL PROJECTEnd User: PDVSA.Location: VenezuelaDuration: 6 MonthsDescription: SMLS STAINLESS STEEL TUBINGS, ASTM A789 UNS S32707, Diameter is 60.3mm-88.9mm , 327 Mtons .

SUNLION SUNLION 2019

SIEMENS EGYPT PROJECTEnd User: SIEMENS.Location: EGYPTDuration: 5 MonthsDescription: H BEAMS , JIS G3101 SS400 , H 125X125X6.5X9H 200X200X8X12. BEAM C10-C25b , 2659 Mtons.

WOMEY BRIDGE PROJECTEnd User: VINCI.Location: BeninDuration: 4 MonthsDescription: SSAW PILING PIPES, EN10219 S355JR , Diameter is 1032, 3680 Mtons.

INDIA PROJECTEnd User: BHEL.Location: INDIADuration: 6 MonthsDescription: ALLOY STEEL PLATES, ASTM 387 GR12 CL2 , 16-50mm *2000mm*7500-12000mm , 5881Mtons .

BAKHRABAD SIDDIRGONJ TRANSMISSION PIPELINESEnd User: GTCL.Location: BangaldishDuration: 6 MonthsDescription: LSAW PILING PIPES, API 5L PSL1 X52 , 914mm*12.7/19.05 , 5789 Mtons .

SUNLION21 SUNLION 22

PETRONAS OIL TANK PROJECTEnd User: SABIC.Location: SAUDI ARABIADuration: 10 MonthsDescription: STEEL-CLAD PLATES,ASTM A264 (ASTM A240 304L & ASTM A516 GR.70N) ,(3.5+58)*3500*12000, (5.5+69)*3200*13260,2275 Mtons.

MECHANICAL INSTALLATIONS WORKS IN LEKKI FREE TRADE ZONEEnd User: DANGOTELocation: NIGERIADuration: 5 MonthsDescription:GALVANIZED SMLS PIPES,API 5L GR.B / ASTM A106 GR.C,Diameter is 88.9mm-219.1mm, 1207 Mtons.

SMS,YANASE PROJECTEnd User: SAMSUNGLocation: KOREADuration: 9 MonthsDescription:SQUARE & RECTANGULAR TUBES, JIS G3466 STKR400 & STKR490 , 250*250*10*12000, 250*350*12*12000, 250*400*14*12000 , 12735 Mtons.

PIPING SYSTEM PRE-FABRICATIONEnd User: SK E&CLocation: MyanmarDuration: 4 MonthsDescription:Pre-fabricated Piping System , ASTM A106 Gr.B & Gr.C , 235 Mtons.

SUNLION SUNLION 2423

PRO

JECT R

EFEREN

CE

PROJECT NAME

USERDATE

PRODUCT TYPESPEC &

GRADESIZE

QUANTITY(TONS)

SEWA HAM

RIYAH IPP EXTERNAL PIPIN

G PJTGE

Aug-Dec,2019SM

LS PIPES

DHAKA TRANSM

ISSION

PIPELINES

GTCLAug-O

ct,2019LSAW

PILING PIPES

ASTM A335 P11, P22,P91,P92,

ASTM GR.6

API 5L PSL1 X52

68.3mm

-711mm

3230

762mm

*16.09mm

2177

REFINERY LIN

E MAIN

TANCE PRO

JECTPATRO

NAS

Jun,2019SM

LS PIPES

SMLS PIPES

A333 GR6,ASTM A106 GR.B &

GR.C88.9-610m

m *5.49-18.25m

m1154

PAPUA N

EW GU

INEA SEAPO

RT PROJECT

WO

RLEYPARSON

SM

ay-Jul,2019JETTY &

BERTH STRUCTU

RE(STEEL SHEET & PIPE

PILES ,DOLPHIN

S,MO

DULES,ETC)

AWS D1.1 &

AS1554 & AS 3678

GR.300 & ASTM

A252 GR. 3 1 SYSTEM

1 SYSTEM

5563

SMS/YAN

ASESAM

SUN

GApr-Sep,2019

SQU

ARE & RECTAN

GULAR TU

BESJIS G3466 STKR400 &

STKR490250*250*10*12000,250*350*12*12000,250*400*14*12000

12735

CHIAHUI EXTERN

AL PIPING PJT

GEJan-Apr,2019

A333 GR6,ASTM A106 GR.B &

GR.C48.3m

m-406.4m

m1240

PETRON

AS OIL TAN

K PROJECT

SABICSep,2018-M

ar,2019STEEL-CLAD PLATES

ASTM A264 (ASTM

A240 304L & ASTM

A516 GR.70N

)(3.5+58)*3500*12000,(5.5+69)*3200*13260

2275

NIGERIA AIRPO

RT PROJECT

NIGERIA AIRPO

RTAug-O

ct,2018H BEAM

SASTM

A709 GR.50HW

200X200X10X12,HW400X400X16X20

1780

JAWA1 PJT

GEAug, 2018

GALVANIZED SM

LS PIPESASTM

A106 Gr.B & Gr.C

60.3mm

-88.9mm

353

SAUDI ARABIA AIRPO

RT PROJECT

DAEWO

OM

ay-Oct,2018

SQU

ARE & RECTAN

GULAR HO

LLOW

SECTION

SEN

10210 S355JOH

400*400*16*13800,300*500*14*125005514

VOPAK TERM

INAL LESEDI

VOPAK

Aug, 2018CO

ATED ERW PIPES, FITTIN

GS, FLANGES

API 5L GR.B, A234 B, A105168m

m-610m

m350

DANGO

TEAug, 2018

GALVANIZED SM

LS PIPESAPI 5L GR.B / ASTM

A106 GR.C88.9m

m-219.1m

m1207

HALLIBURTO

N O

ILFIELD PROJECT

HALLIBURTO

NJun, 2018

SEAMLESS TU

BINGS

ASTM A519 GR.4140

114.3-457mm

365

KOC O

IL TRANSPO

RTATION

PROJECT

KOC

Mar, 2018

VALVESAPI-602/BSEN

ISO 15761 &

KOC STD

KOC-M

P-0133/8-10"

656

BANO

CO W

HARF PLATFORM

BAN

OCO

Apri, 2018JETTY &

BERTH STRUCTU

RE(STEEL SHEET & PIPE PIL

ES, HEADSTOCK,PO

NTO

ON

,ETC)EN

1090 & AW

S D1.1 & ASTM

A252 GR.3 &

& GB/T1591 Q

345D3387

BAKHRABAD SIDDIRGON

J TRANSM

ISSION

PIPELINES

GTCLJan,2017-M

ay,2018LSAW

LINEPIPES

API 5L PSL1 X52914m

m*12.7/19.05

5789

INDIA PRO

JECTBHEL

Sep-Oct,2017

STEEL PLATESASTM

387 GR12 CL216-50m

m *2000m

m*7500-12000m

m5881

WO

MEY BRIDGE PRO

JECTVIN

CIJun-O

ct, 2017SSAW

PILING PIPES

EN10219 S355JR

1032*16*12,5003680

PDVSA OIL PRO

JECTPDVSA

Jul, 2017SM

LS STAINLESS STEEL TU

BINGS

ASTM A789 U

NS S32707

60.3mm

-88.9mm

327

INDIA PRO

JECTBHEL

Mar, 2017

STEEL PLATESA515 GR.65

8*2500*10000-100X2000X60001160

EURO

PE PROJECT

ITALYJan, 2017

SMLS PIPES

EN 10210 S355J2H

146-515*22.2-801544

PIPING SYSTEM

PRE-FABRICATION

SK E&C

Dec, 2016PRE-FABRICATED PIPIN

G SYSTEM

ASTM A106 Gr.B &

Gr.C1 SYSTEM

1235

SIEMEN

S EGYPT PROJECT

SIEMEN

SN

ov, 2016H BEAM

SJIS G3101 SS400

H 125X125X6.5X9 H 200X200X8X12.BEAM

C10-C25b1659

MO

ROCCO

BEND PRO

JECTM

ORO

CCO

Oct, 2016

BENDS

A106B323.8m

m-610m

m10

TRUN

KLINES REPLACEM

ENT AN

D HUBSHAN

DIRECT DEPRESSU

RIZATION

PROJECT

ADCOSep, 2016

STAINLESS PIPES AN

D FITTINGS

ASTM A312 TP316L/316 ASTM

A358 TP316 ASTM

A182 F316/316L"33.4m

m-273m

m55

Chilled Water Pipes &

Fittings

KOC

Aug, 2016CARBO

N STEEL FO

RGED FITTINGS

ASTM A105

33.4mm

-60.3mm

610

INDIA PRO

JECTBHEL

FLOU

R

AUSTRALIA PO

RT

Jun, 2016SM

LS PIPESA333/SA335 P9/P11/P22/P91/SA106 GRC

88.9-406.4mm

*5.49-18.25mm

3507

INDIA PRO

JECTCO

UN

TERSTEER PRO

DUCTIO

NS LTD

May, 2016

ALLOY FO

RGED ROU

ND BARS

GH4742O

D 160mm

10

MIDDLE EAST CRU

DE OIL TREATM

ENT

Apr, 2016SM

LS PIPESASTM

A333 Gr.6168.3m

m-406.4m

m1816

MAIN

TENAN

CE PLATFORM

FABRICATION

May, 2016

STEEL STRUCTU

RE PLATFORM

AS/NZS 3678 GR.3501 STRUCTURE

200

PDVSAVEN

EZUELAN

OIL PIPE PRO

JECT Feb-M

ay, 2016SEAM

LESS TUBIN

GSAPI 5CT

2-3/8", RANGE 2 1866

FLOU

RCAN

ADA GAS PLANT PRO

JECTFeb, 2016

SSAW PILIN

G PIPESASTM

A333 Gr.633.4m

m-610m

m1875

BHPBHP PILIN

G PROJECT IN

AUSTRALIA

Dec,2015-Jul,2016SSAW

PILING PIPES

ASTM A252 GR.3

914mm

*12.7/19.053059

CON

TRACT FOR SITE CIVIL CO

NSTRU

CTION

AND/

OR M

ECHANICAL IN

STALLATION

S WO

RKS IN LEKKI

FREE TRADE ZON

E, NIGERIA

LORDEGAN

LORGEGAN

UREA FERTILIZER PRO

JECTDec, 2015-M

ay, 2016

Dec, 2015-May, 2016

SEAMLESS STEEL PIPES, GALVAN

IZED PIPESASTM

A106 Gr.B, A333 Gr.6, A335 P11, P2221.3m

m-813m

m1180

ODEBRECHT

PERU PRO

JECTSSAW

& LSAW

API 5L PSL1 X521219m

m*19m

m1655

CND

BLUE DO

LPHIN U

PGRADING PRO

JECTN

ov,2015-Feb,2016SSAW

PILING PIPES

GB/T1591 Q345B

610-1100mm

*14-50mm

4128

TITASBAN

GLEDESH PIPELINE PRO

JECTO

ct, 2015SM

LS/ERW PIPES

API 5L GR.B / ASTM A106 GR.C

168.3mm

-355.6mm

232

CEGLIRQ

UEN PORT EXTENDING PRO

JECT IN CHILEO

ct, 2015SSAW

PILING PIPES

API 5L X601117.6m

m*18/22

2119TRAN

SPORT AN

D IN

FRASTRUCTU

RE BUREAU

BARANGAROO

FERRY HUB PROJECT IN SYDNEY

Sep,2015-Jan,2016SSAW

& LSAW

AS/NZS 3678 GR.350650-1200m

m*20-40m

m1318

SON

ATRACHALGERIA PIPE PRO

JECTSep-Dec, 2015

SMLS CARBO

N &

STAINLESS STEEL PIPES

ASTM A333 &

A355 ASTM A312 TP316L

ASTM A358 TP316 ASTM

A182 316L21.3m

m-406m

m380

USA

TEXAS CITY HARBOR

Sep, 2015LSAW

MO

NO

PILE/TOW

-SECTION

PAINTIN

GASTM

A252 GR.2 / ASTM A572 GR.50

1350mm

-1650mm

*19mm

-44mm

481

TITAS

USA

USA

TECHNIP

DUSLO

PROJECT

Aug, 2015 SM

LS PIPESASTM

A335 P11, P22, A33 Gr.626.7m

m-508m

m1866

MCD

PBF PROJECT

Jul, 2015

Jul, 2015

Jun, 2015

ERW PIPES

API 5L PSL2 GR.BN508m

m*12.7m

m639

TITAS GAS TRANSM

ISSION

& DISTRIBU

TION

SMLS/ERW

PIPESAPI 5L PSL1 X42 &

X46168.3m

m-406.4m

m345

KPCLIN

E 1 PIPELINE REPLACEM

ENT PRO

JECTSM

LS PIPESAPI 5L PSL1 X60 &

GR.B88.9-508 m

m1314

SHELLSHELL REFIN

ERY LINE M

AINTAN

CE PROJECT

May, 2015

SMLS PIPES

API 5L X65/A333 GR.860.3m

m-711m

m777

ODEBRECHT

PROYECTO

MATARAN

I PROJECT

May, 2015

SSAW PILIN

G PIPESASTM

A252 GR.2 / ASTM A572 GR.50

914mm

-1422mm

330

SAUDI ARAM

COM

ASTER GAS STATION

(ARAMCO

)M

ay, 2015LSAW

LINEPIPES

API 5L PSL2 X70M1016m

m-1219m

m2950

PETROBRAS

FPSO TU

BI PROJECT

Apr, 20153PE SM

LS PIPESAPI 5L X65/A333 GR.8

21.3mm

-610mm

1117

MCD

WEBB DO

CK PORT, M

ELBOU

NE

Apr, 2014-Jun, 2015SSAW

PILING PIPES

AS 1163 C390 WITHIN UHB CO

ATING

API 5L X52

914mm

-1524mm

22000

HOU

STON

PORT

Apr, 2014-May, 201

SSAW PILIN

G PIPES1218-1826m

m5268

TESLON

PORT

Mar-O

ct, 2014LSAW

PILING PIPES

API 5L X60914m

m-2400m

m9627

CANADA (SHELL)

SHELL LNG PO

RTFeb-Aug, 2014

SSAW PILIN

G PIPESAPI 5L X52

762mm

6400

SUNLION25 SUNLION 26

Project Management Framework

Project ManagerOperations Manager

Supplier Production/QCTeam Leader

Supplier TeamMember

>Project Plan>Coordinate Whole Project>Negotiation>Kick off Meeting

>Project Production Plan>Project Kick-off Meeting>Monitor Production Progress>Update Manufacturing status>Digest Project requirement and carry out to comply>Coordinate with Engineer, QA/QC, Logistics etc to well implement projects>Coordinate Variations>Technical Supporting>Resolution for NCRs

>Detail Production Plan>Implement MPS>Report Production progress>Report Manufacturing status>Adjust according to variation>Prepare WPS/PQRs

>Prepare detail joints>Detail Shop dwgs>Report Production progress>Raw material purchase>Stock Report

>Detailed Drawing>Technical Proposal>Solution Strategy>Design and Drawing>Packing Solution paiting Solution

>Prepare ITPs>Pre-qualify Suppliers>Audit Quality System>Audit Quality Manual>Review MDRs>Audit Person Qualifications>Audit Equipment Calibration>Review & Evaluate NCRs

Supplier QA/QCTeam Leader

Supplier QCInspectors

>Detail Production Plan>Implement MPS>Report Production progress>Report Manufacturing status>Adjust according to Variation>Prepare WPS/PQRs

>Implement the ITP>Prepare the Inspection records

Supplier QCInspectors

Supplier QCInspectors

>Conduct ITP>Daily in-process inspection>Fill out the inspec. report>Finish products inspection>Quality inspection Report>Report problems and findings

>Witness and Verify the products quality and/or tests are complying with contract requirement as an independent party if required

>Delivery Plan as per Contract>Containers Forecast & Booking>Container Loading Plan>Shipping Documents Preparation>Supervise Delivery & Loading>Shipping advice to Customer>Ship Tracking>Forward Shipping doc. to Customer

Supplier LogisticsTeam

ShippingForwarder

>Packing the QC Released Products as per Packaging dwgs>Storage, Handling & Loading >Delivery Records>Packing List

>Handling containers or vessel space booking >Handling Custom clearance & insurance documents

>Project information Collection & Distribution>Communicate with customer>Overall Scheduling>Cost & Payment control>Documents review & release>Coordinate with Supplier top management>Pre-qualify the suppliers>Trouble shooting

5.1 Stowage plan

ProfessionalSunLion Team

ProfessionalClients

Professional Sunlion TeamFrom CNPC,Sinopec,

Valin,Baosteel in China

Professional InternationalClients out of China

P1Professional

ManufacturersProfessional State-Owned

Manufacturers in China

P2 P3

Quality(QA/QC) Engineering

Production Procurement

●NCR Control System●Traceability Control●Third Party Inspection

●Detailed Drawing●Technical Proposal●Solution Strategy

●Monitor Progress●Technical Support●Production plan & Schedule

●Qualified Supplier Inspection●Feasibility of Manufacturing ●Delivery Time and Schedule

ProfessionalSunLion Team

ProfessionalClients

P1Professional

Manufacturers

P2 P3

ProjectManagement

Advantages

Project Management Advantages/ 项目管理架构 / 项目管理优势

因为专心所以专注

因为专注所以专业

因为专业所以专属

>Raw Mat′l Insp.& Retest>Eq′pmt. Calibration Insp.>Personnel Qualification Insp.>Supervise Supplier QC>Conduct ITP>Coordinate with 3rd Party>In-process Inspection>Finish Products Inspection>Witness NDC>Release Note>Collect Certufucates & Doc.>Raise NCRs

WHY US WHY US 核心竞争力

●Delivery & Loading Plan●Stowage Plan Ship Tracking●Forward Documentations to Customer

Logistics

Engineering QualityContral Logistics Officer

ProcurementCoordinator

QualityAssurance

SUNLION27 SUNLION 28

Documentation

Shipping Documents Bill of Lading Commercial Invoice Packing ListInsurance Policy Certificate of Origin

Loading Survey report

Final stowage sketch

Quality Plan

MPS

ITP

WPS/PQRs

WPQs

Manufacturing Conformance Certificate

Shop Drawings(as-built)

Raw Material Mill Test Certificate

Raw Material Re-test Report

Consumable material mill certificate

Material traceability report

Weld map

NDT report

NCRs

Dimension inspection report

Painting Records

Coat inspection report

Release note

LC documents (if payment by LC)

Quality documents (MDR)

Sales Support Quality Production Logistics Logistics Documentation

StowagePlan

43

Sales Support Quality Production Logistics Logistics 5.1 Stowage plan Documentation Prequalification of suppliers

Logistics Solution

Full timeLoading survey

Ship BookingStowage Plan

Kick off meetingbefore Loading

CustomClearance

Collecting ShippingDocuments,

and Insurance

Inspectionand Records

Detailing Drawing Design

PARTS LISTMASS/ITEMMATERIALDESCRIPTIONPART LENGTHQTYITEM

1.1 kg A105NFlangeANSI B16.5 Slip-On Welding Plate Type Flange

2 1

16.9 kg A105NFlangeANSI B16.5Slip-On Welding Plate Type Flange

2 2

0.4 kgA106B PipeASME B36.10 Pipe 50 A x Sch 80

60 mm2 3

284.1 kg A106BPipeASME B36.10 Pipe 400 A x 12.7T

2307 mm14

1

1

2

2

3

3

4

4

5

5

6

6

A A

B B

C C

D D

APPROVED

DRAWNTHIS DRAWING IS THE PROPERTY OF SUNLION PIPING ENGINEERING CO., LTD.

AND IT MUST NOT BE PARTIALLY OR WHOLLY COPIED OR USED WITHOUT THE WRITTEN PERMISSION OF SUNLION PIPING ENGINEERING CO., LTD..

REV. No.

CHECKED

Floor18,No.928 Yierba Jinian Rd Baoshan District, Shanghai China Tel.:+86-21-6173 5712 e-mail:sunlionpiping.com

DESCRIPTIONDATE

CLASS

DATE

SCALETITLEREV. No.

SHEET 8/12/2016

DRAWING No.

11/12/2016

11/12/2016

11/12/2016

PAPER SIZE A3

BV

SK E&CDrainage system INSTALLATION

REFERENCE DRAWINGS

ARRANGEMENT OF DRAINAGE PIPING :

4 /5

320.8 kgTOTAL WEIGHT

ARRANGEMENT OF DRAINAGE PIPING

FWD1:20

2

4

2

1

1

3

3

L1 L2 L3

L4

5L

Tony Zheng

Jason Qi

Leo Liu

/ 物流方案 / 详图设计

/ 完工资料

配载计划

SUNLION SUNLION29 30

SunLion India

SunLion Indonesia

SunLion Middle East

SunLion Korea

SunLion North America (Canada)

SunLion Romania Office

SunLion Netherland

SunLion Head Office(Shanghai,China)

Domestic & Overseas Offices / 国内、国际分公司(办事处) Steel Structure and Piping Supply Chain of EPC ProjectsEPC 项目*钢结构与管道集成供应链

SunLion Shanghai Stock Base上海鼎建管道工程有限公司

SunLion Tianjin Stock Warehouse 沧州尚林管道工程有限公司

SunLion R&D Center 江苏尚大海洋工程技术公司

SunLion CNAS Laboratory尚林(苏州)CNAS检测实验室

SunLion Australia

SunLion Australia

SunLion Head Office SunLion North America

SunLion IndiaSunLion ThailandSunLion Hongkong

SunLion IndonesiaSunLion Korea

SUNLION31 SUNLION 32

MAIN END USERS主要客户

SUNLION33 SUNLION 34

Professional SunLion Team combined with Professional Chinese Manufacturers, Provides Professional Integrated Supply Chain Solution for EPC Projects!!!