Section 20A ANTIQUE 1929-on 45-S/V-UL-K-Model

20A-1PRESTON CYCLE PRODUCTS INC.

Section 20AANTIQUE 1929-on45-S/V-UL-K-Model

Preston Cycle’s 1939 UH

Brake ....................................... 45 to 50

Electrical ......................................... 2-9

Exhaust .........................................10-11

Fenders ....................................... 29-31

Frame Related ............................ 24-28

Gas Tank/Carb ............................ 32-38

Handlebar ................................... 18-23

Oil Lines ...................................... 40-41

Primary ............................................. 42

Speedo...............................................39

Springer ...................................... 12-23

Wheel .......................................... 43-44

20A-2 PRESTON CYCLE PRODUCTS INC.

Replacement Battery Box for 45-Made in USAFor solo or trikes, top is included, order mount plate separately, #19816 & #19817 include raw box with top.PC# OEM# Years Model19816 66202-29 1929-52 (A) Solo (raw)19817 66203-40A 1940-63 (B) Servicar (raw)19113 66377-29 Top Only Raw19114 66377-29 Top Only Chromed19115 66302-29 1929-53 (C) Mount plate, ea.19116 49180-36 1929-53 (D) Mount stud, pair

Electrical

Chrome Rear Stop Light SwitchesWe offer a full line of chromed mechanical stop light switches. These switches feature steel construction, support plates and chrome plating. Ideal for replacing worn-out stock parts or when building a ground-up project.PCP Fits2177 45” WL models 1937-57 and Servicars from 1937-50 pull-on style (72003-34T)17202 XL & K 1952-66 push off style (72004-52)

Chrome Brake Light Switch Kit Mechanical, pull-type brake light switch kit fits 1939-48 UL. Re-places OEM# 72003-34. Order mounting kit separately.19197

Headlamp & Horn Bracket Insulator Terminal KitColony kit includes insulators, fender lamp wires, steel and brass hardware for headlamp bracket to fender light on BT 1945-48 and Servi-car 1945-57.72096

Wire ClipsPCP Model Application72449 45’s Rear frame (9976)72450 1936-69 BT Front frame leg (9979)72489 1961-84 BT Frame head tube (10012)72490 1930-49 45 Seat post tube, frame tube and 1936-49 BT frame head (4730-30A)72491 1930-48 BT Brake light, battery wire (4727-30)72492 1923-33 All Taillight (4727-23)72504 1940-57 45 Horn wire (4703-38A) 1940-57 Servi 1938-48 BT72505 1936-64 74OHV Front spark plug cable (4726-36)72520 1938-65 BT Timer wire (4726-37)72547 L1945-E47 BT Type I, frame head tube (bull neck) (1977)72545 L1947-49 BT Type II, Frame head tube (9977)72546 1950-60 BT Type III, Frame head tube (9977)72586 1949-64 BT Timer cable clamp (9957)72587 1936-48 BT Timer cable clamp (4726-36A)

2177

17202

72449

72489

72490

72492


Early Horns19360 6 V Horn (no wings)2174 12V Horn (no wings)19047 Bracket Only (69003-42)

Horn BracketsPCP OEM Years19045 69130-36 (A) Upper 1936-4019058 69120-36 (B) Lower 1936-4519046 69120-45 (B) Lower 1945-5719047 69003-42 (C) Rear strap (all)

19323

Horn MountsPCP Description19323 Horn mount kit all models except VL 1936-41 19324 Horn mount kit 1946-4819326 Horn mount kit 1949-5419327 Horn mount rubber 1936-4119328 Lower horn bracket 1936-45

A

B

C

Electrical

Horn Terminal Board KitReprodiction of horn terminal board complete with fasteners. Used on 1942-52 WLA, WLC and XA.72789

Horn Terminal Board KitReprodiction of horn terminal board complete with fasteners. Used on 1942-46 all models except WLA, WLC.72819 Replaces 4829-42

2174

19047

Beehive Tail Lamp KitIncludes glass top, red glass lens, top lens gasket, mount gasket and parkerized mounting kit. Fits 1939-46 EL, U and 1941-46 FL.21935

B


Alternator Conversion KitKit includes black alternator with chrome cover and black solid state regulator. Must be used with 12 volt battery system. Fits EL, W 36-52 & FL 41-57.19724

12 Volt Alternator Generator Conversion KitKit includes chrome 12 volt alternator, correct gear with slinger deflector, oil gasket, nut and finned solid state regulator. Accepts 5/16” screws, not included. Fits W 36-52 & G 36-73.19735

12 Volt Alternator Generator Conversion KitKit for side valves includes black 12 volt alternator, gear with built-in slinger necessary for most Flatheads, oil gasket, nut and finned solid state regulator. Accepts 5/16” screws, not included. Fits VL 30-36, U 37-48, W 37-52, G 37-73.19736

Replica Delco Remy 6 Volt HornsChrome grill with wing logo. 8-32 NF threaded terminal studs.

PCP Application Bracket19720 VL, WL 31-35 & EL, U 36-41 Not included

19721 UL, WL, G 36-41 & FL 42-48 Rear strap

Black 45 Solo 12 Volt Battery Box and Lid• Box replaces 66202-29 and lid replaces 66373-54PCP Item19883 Box and lid19718 Lid only

19718

19721

19720

Electrical

Battery Box Top KitsIncludes black top, hold down rods, spark plugs, spark plug holder and nuts.PCP Years19740 FL 41-47, EL, UL & G 36-47 with 18mm plugs19747 FL 48-57 with 14mm plugs

1974719740


Vintage Cloth Spark Plug Wire KitIncludes 40” cloth wire with brass eyelet ends, coil terminals and boots. Fits VL 30-34, WL 30-52, UL 37-48, EL 38-40, FL 41-60.17303

Electrical

Complete Wiring Harness Kits 1930-69 (USA)Perfect colour-coded reproductions of original H-D wiring har-nesses. Early harnesses feature original cotton braided insulla-tion and woven looms. All harnesses include wire terminals (not attached) and wiring diagrams in pre-1966 kits.PCP OEM Application28669 1916-28 JD electric model4194 4735-30 1930-36 VL, RL4196 4735-36 1936-37 WL, UL, EL4198 4735-38A 1938-46 WL, UL, EL, FL28670 4736-42M 1942 45 Army4200 4735-47 1947 WL, UL, EL, FL4202 70321-48 1948-57 WL, UL, FL, FLH5263 70320-56 1952-58 K, XL 6-volt

SERVI-CAR28661 1964-6528635 1966-70 G-model28636 70272-71 1971-73 G-model28660 — 1934-69 Servi-car & sidecar taillamp4214 — 1952-64 Turn signal kit only

Springer Fork Head Light Bracket 1936-47This reproduction mounting bracket fits 1936-on 45” 74” and 80” Twins. The late type will allow for the use of stock shock absorber.PC# OEM# Type Finish19806 4966-36 Early Black19804 67810-36 Late Black

Springer Head LightComplete, 6V. Exact with reflector and Bezel, plus glass lens.PCP Description832 Chrome Assy.3558 Black Assy.3552 Bezel17015 12V Bulb (each)

19804 19806

8323558

18mm Spark Plug Conversion NipplesFeatures replica air cooled styling when used with standard D-16 inner plug, available separately. Pair.PCP Application19659 Conversion set5146 Plugs (D-16) Champion (6 pk)

Globe Ignition Tune Up KitIncludes spark plugs, points and condensor kit. Fits 30-36 VL, 36-47 EL, G, W, 37-48 UL and 41-47 FL.17339

18mm Air Cooled Style Spark Plug SetFits 36-47 EL, 37-47 UL and 41-47 FL.17304

4202 28670


Oil Tank, Battery & Fender AccessoriesPC # OEM # Description (chrome)17009 66390-58, 66393-58 Tall 6-volt hold-down rods2235 66373-36 Battery top plate849 62575-36 Battery bottom plate850 62585-36 Battery plate bracket

Battery Flags and Hold Down StrapsParkerized flags for horseshoe tank with 6 volt battery.PCP Application19288 1936-57 (66390-36, 66393-36)19289 1958-64 (66390-58, 66393-58)

6V Batteries to Fit FL and FLH ModelsPC Description6878 H-2 type fits BT 1941-1964 (4” x 4-1/2” x 8-1/2”H) (66006-29D)

12V Custom BatteryCustom size battery is ideal when converting to a 12-volt system. 3-19/32” wide x 4-1/16” long x 4-1/2” high. Rated at 5-1/2 amp hours. 6875 37-64 FL w/12-Volt conversion or horseshoe oil tank

6 Volt BatteryPCP Description6897 H-1 Style for 1929-36 VL and J’s 4” x 6.5” x 6.5” high

6 Volt Battery HardwareFits BT 1936-64PCP OEM Application19287 66373-36 Top cover, black2235 66373-36 Top cover, chrome19288 66390-36 Rod set with flags and pads 66393-36 1936-57 (parkerized)19289 66390-58 Rod set with flags and pads 66393-58 1958-6412595 66387-26 Wing nuts 1929-64 (pair)5445 66100-15 Pad set (2 pack)

Battery Terminal KitThese faithfully reproduced battery terminal fasteners and felt washers will add a look of authenticity to any restoration. Fits all 6 volt Harley Davidson 1923-65.5122

Electrical

19289

849

2235

850

17009


Indian Complete Wiring Harness KitComplete harness kits with Cotton braided wire and asphalt loom for 1940-53 Indians.PCP# Description28653 Chief 1944-4728654 Chief 1948-53

Frame Electrical Terminal Screws and FittingsDuplicate of OEM Kit# 1523-26A. Contains insulators, screws and nuts os original. Fits 1936-1947 Big Twins and 45’s.8942

Generator Relay (Solid State)3-post replacement generator relay for Big Twins and allows use of “idiot light”. Replaces OEM 74750-38. Used on all 3 brush generators 1938-57.28103 Relay with chrome cover

Solid State Relay EliminatorReplaces mechanical regulator on 3 brush generators 1937-57. No sticking relays and moving parts to wear out.28100 Relay eliminator 1937-57

Plug Wire Holder Bracket19633 1937-63 45 SV (32000-37)3998 1966-on FL, 74 OHV Rear (32000-37A) chrome

Distributor BandReplaces 32710-36 on all 37-47 models, complete as illustrated.PCP OEM19018 32710-36 Band kit19019 32732-37 Control bracket19392 32735-37 Bracket 74 & 80 SV19552 74765-36 Relay mount BT 36-46, OHV19553 74765-47 Relay mount BT 1947-64, OHV19554 32666-30 Plate spring washer (each)19544 56628-54 Timer cable bracket 1954-6419539 56625-36 Clamp72520 9971 Wire clamp19454 56626-37 Timer cable to frame clamp 1937-46

Miscellaneous Antique HardwarePCP Description19530 VL Ignition key 1926-36 (4521-36) (each)72520 Timer wire clip 1938-65 (9971) (each)19536 Throttle and spark coil spool 18-48 (3332-36) (ea)19538 Clutch brake cable ferrule 1950-52 (each)19539 Timer cable clamp 1936-48 (each)19540 Timer cable clamp 1949-64 (9957) (each)19541 Timer cable clamp 1937-46 (56626-37) (each)19542 Timer cable clamp 1946-64 (each)19543 Timer cable clamp strap 47-53 (56628-47) (each)19545 Throttle cable clamp 1952-65 (56609-52) (each)19546 Front brake cable clamp 1928-48 (4160-28) (each)

Electrical

Colony Housing to Frame Clamp Bolt Kit Kit includes parkerized bolts (83001-32) nuts and lockwashers to mont housing to frame. Kits fits 1 clamp only. 2 Kits are required for both clamps.72092 Servi-car 1932-4172093 Servi-car 1942-73

72520


Early Distributors 1936-47 2 Bolt manual advance style distribu-tor features natural alloy finished base with shaft and gear installed, stainless advance band, chrome top and clip, base retainer and points wire. Top housing also includes early point with spring set condensor.PCP Application19366 45 1936-4719367 BT 1936-474047 Chrome cap

V-Twin Replica CoilsSteel jacketed coils include nuts, packing and wires.

1930-47 BT and 45 Models (31602-30)19362 6V Black 19559 6V Chrome19560 12V Black19561 12V Chrome

1948-60 (37604-48)19563 6V Black5079 6V Chrome19562 12V Black5078 12V Chrome

Distributor Top RebuildIncludes points, condensor, wire, washers, bushings, studs, and hardware.PCP Description19277 1936-47 Complete kit 19636 1937-47 Base only19257 1948-60 Base only

19277

Circuit Breaker Post Rebuild KitThis item is an accurate reproduction of a repair kit offered by Harley in the 1940’s and 50’s to repair damaged and broken posts and insulators on all model Harleys 1930-48. The Colony kit provides an installation tool to install the post.4378 Kit

Distributor Bracket 74 & 80 SV19392 32735-37

1930-47 Points & Condenser Set19168 Includes spring

Electrical

Coil Mount KitsPCP Application19361 45 Solo and Servi-car 1930-52 (zinc plated)72327 VL 1930-36 and 45 1927-4572281 BT 1937-47

Colony Spark Control Coil Frame ClampParkerized clamp (56626-37), screw, nut and lockwasher for use on 1937-46 BT.72627

Circuit Breaker Screws 45” 37-739415 Cad

7228172327

5078

1956319559


Coil Mount KitsComplete reproduction coil mounting kit for 1937-47 UL. Includes 1723-36 u-bolts, 1723-36A spacers, 0256 lockwashers, 0107 nuts and 1724-29 u-bolt straps.72281

Control Cable Wire Loom ClipsSpring steel clips have a parkerized finish and are sold each. Parts book should be checked for proper fitment. PCP OEM Application19448 9977 Frame neck BT 1936-4919480 9977A Frame neck BT 1950-6019481 1602-30 1” I.D. handlebar 19449 9977-46 Bull neck frame BT 1946-4719451 9983 Tailamp wiring-left upper frame tube BT 1936-5719447 9976 45” Rear frame (ea)72450 9979 Front frame leg generator wire 1-1/4” BT 1936-6919453 56615-49 1-1/8” I.D.19454 56626-37 Timer cable 1937-46

Generator Mounting Screws45 Cu. In 1937-73PCP Year Brush Type (pairs)5205 1937-57 3 Chrome stock1168 1937-57 3 Cad stock5206 1958-73 2 Chrome stock1552 1958-73 2 Cad stock

74” & 80” ULH 1930-489108 1930-48 2 Chrome stock9109 1930-48 2 Cad stock

Chrome Generator Mount Strap Fits 3 brush type.PCP Application19637 1932-52 45 and SV (30025-30)

Single Point DistributorFeatures 2 bolt styling, manual advance and natural alloy finish base with shaft and gear installed. Top housing includes 1948-69 style single points, condenser and adjuster plate, chrome top and clip, natural alloy base retainer and points wire.PCP Description28213 45’s 1948-52 WL, 1948-63 G and 1948 UL 28215 BT 1948-59

Single Point Distributor Parts 1949-60PCP Description10101 Gear pin (255) (10 pack)8146 Mount bolt kit (cadmium) (3779, 7035)8145 As above, chrome19252 45 Base with shaft (32506-37)19256 Eccentric screws (30507-47A) (each)18538 Bushing set 1936-69 (32525-36A)2114 Chrome cover clip 1935-64 (32529-36)4034 Timer gear 1936-69 (32531-36)N/A Breaker base 1937-46 (32578-37)19257 Breaker base (32579-49)3336 Base retainer FL 36-64, XL 54-64 (32585-36)4047 Chrome cover 1936-64 (32589-36)19251 Adjuster screw and plate kit 1947-63 (32593-47, 32594-47)19254 Wire stud (32676-49)19255 Distributor to coil wire (32690-30)

Electrical

Circuit Breaker Ajusting Screw KitCad plated fasteners used on 1947-64 BT& 45’s Includes OEM 32593-47, 1062 and 7744. 72632


Early ExhaustCLAMPS NOT INCLUDED

WITH HEADER SETS

UL Clamp Set 1937-4019002 Parkerized19215 Chrome19211 Chrome

UL Clamp Set 1941-48, EL-FL 1941-4719005 Black19216 Chrome

UL STOCK MUFFLER WITH BUILT IN Y-PIPEReplaces OEM#65201-37. Used on all 74 & 80 cu. in. side valves 1937-40 and 1936-40 Knuckles.4888 Black93052 Chrome19002 Parkerized clamp set UL 37-4019211 Chrome clamp set UL 37-40

VL STOCK REPLACEMENT MUFFLERReplaces OEM #1001-30. Fits all 1930-36 side valve BT4890 Black93054 Chrome

VL 2 PIECE HEADER SETReplaces OEM #1004-30 and 1007-30. Fits all 1930-36 side valve Big Twins. 4891 Black93053 Chrome

VL Clamp Set 1930-3619006 Black19217 Chrome

Knuckle Clamp Set 1937-4019002 Parkerized19211 Chrome

UL-ULH Exhaust System Available in 3 or 4 piece kits. 3 Piece kit is stock on 37-40 and uses the muffler with built-in “Y” (#4888, #93052). The 4 piece kit is stock on 41-48 and uses standard 1-¾” inlet mufflers (#93005, #93006)PCP Type Finish4886 3 pc Black93051 3 pc Chrome93055 4 pc Black93056 4 pc Chrome

Note: Three and four piece exhaust systems require hand fitting during final assembly. We suggest to loosen motor mount bolts during installation to allow pipes to adjust to motor position then re-tighten engine bolts.

4886

93056

93055

4888

93052

4891

4890


Early Exhaust

45” 2 Piece Header SetReplaces OEM #’s 65490-41 and 65452-41. Fits all 45’s 1941-52 Solos and Servi-cars and WL, WLA 37-52. Black Finish.4878 Black (1006-41)19811 Chrome

45 Late Type Civilian MufflerReplaces OEM #65228-50. Stock on all 1950-52 45’s.93003 Black93021 Chrome

45 Military Style Muffler with FinStock replacement fits all 45” 40-45 mili-tary bikes and WL 32-52. 93002 Black93027 Chrome

45 Civilian MufflerStock replacement for OEM #1035-32. Stock on all 45’s 1932-49. 6809 Black

45 Chrome Muffler 1945-5093009 1945-50 (65228-50)

45” Clamp Set 1936-5119007 Parkerized19218 Chrome

EXHAUST PIPE NIPPLE AND NUTNickel plated, accurately reproduced nuts and nipples fit the following:9209 Nipple 74 & 61, 1924-29, (1012-25)

CLAMPS NOT INCLUDEDWITH HEADER SETS

Fishtail Muffler 1932-49Fits ALL Two Wheel 45’s with 2-1/2” I.D. 1932-48.6328 Chrome fishtail muffler

Servi-Car Muffler-USABlack painted muffler replaces OEM 65309-51. Use on all 1936-73 45” Servi-Cars.93004 Black93017 Chrome

Chrome Flex Exhaust Covers1-1/2” Cover slides on to fit all 45 models. Sold each. 2421 45’s 1-5/8”

4878 & 2421 covers

19811

Knucklehead Stock Replace-ment Muffler 41-4993005 Black (1001-41)93006 Chrome

BT Clamp Set Knuckle 1941-47 & Panhead 1948-57.19004 Parkerized19212 Chrome

93006

93005

93002

93027

93021

93003


Springer Acorn Nut and RetainerChrome plated acorn nuts and cadmium plated spring retainers for 1930-48 David-son Springers.5120

Springer Cone NutOEM machined gear type with dust shield pressed on.PC# OEM Model19024 48327-36 74-80, 1936-4719607 As above Chrome19025 48335-40 45, 1940-57

ROCKER STUD LOCK TABSPC# Type Year/Qty5116 Big Twin 1936-48 (6)19026 45 Solo 1945-52 (2)

Springer Parts

SPRINGER STEM NUT.Reproduction stem nut for Big Twin 1936-48, 45’s 1929-52.PC# Finish Fits5250 Chrome Big Twin5251 Cad Big Twin5252 Chrome 45”5253 Cad 45”

Front Hub Bearing Cone Retain-er & Lock NutAccurate reproduction of OEM 43633-44 retainer and OEM 43885-30 nut. Fits all 45 solo 1930-on9302 Chrome plated9303 Cad plated

SPRINGER FRONT BRAKE DRUMSCast construction replaces OEM 44133-36 on 36-47, Servi 1941-57.PCP Finish19802 Black19803 Chrome

45” SOLO FRONT AXLE.Replacement front axle for all 1930-52 45” Solo models only. Replaces OEM #43871-30.19028

Chrome Plated Stem NutNut is designed to fit Big Twin and ‘45’ Springers. The shoulder on its base fits into the top triple clamp for positive align-ment.5130 Big Twin Springers5161 ‘45’ Springers

Front Shackle HardwareShackle bar includes 2 bushings and is offered in black or chrome. #2321 is a full hardware kit including all parts in picture. 3 piece rebuild kit includes shoulder bolt, lock tabs, and nut/greaser fitting.19121 Black shackle bar19122 Chrome shackle bar2321 Complete hardware kit only19123 3 piece kit19124 Lock tab (5 pack)19125 Bushings (pair)

1946-57 Rod Bushings and Plate19119 Ball bushings (45643-45)19120 Retainer plate (54230-45)72151 Colony as above 1946-49

Rigid Frame Vibrator BarThis chromed bar fits between the side car loops on 1936-57 stock rigid frames.19118

Chrome 8” Springer Hub CapReplaces 43300-48 for all 1936-48, 74, 1941-57 Servicar front wheel.45011

Spring Fork Rod KitRods are heat treated for wear resistance and parkerized as original.2318 BT, 45 1936-47

Clutch & Brake Hand Lever Clamp Bushing KitCadmium plated bushing (45033-41), washer (6543) and cotter pin (512) used on all 1941-48 Harley models.72730


Springer PartsComplete Rocker Rebuilding KitIncludes all components pictured to completely rebuild the rock-ers on 1930-48 Big Twin Springers, and 1941-57 Servi-car. All parts are interchangeable with new old stock factory parts. Mate-rials, heat treating, and plating are of OEM quality.2319 Big Twin 1930-489216 45 Solo models 1930-52

Springer Front Brake Grease Seal KitFits Big Twin Springers 1937-1948. Also Servi-Car 1941-1957.5287

Springer Spring Rod BushingsPrecision machined bushings are heat treated for wear resistance and cad plated as original. Fits 45” and Big Twin Springers 1931-47.2317

Front Rocker Stud AssemblyContains one hardened ground bushing, one hardened and ground rocker stud with end plug, one 1/2-20 hardened nut and two lock tabs.5114

45 Fork RockerReplace 45661-30 on 45 models 1930-52 Solo models, pair OEM finish.19027

Springer Front Fender Mounting KitReproduction of hardware used to install stock front fender on all 1936-48. 2179 Kit5162 Locks Only

Rocker Stud Bushing Remover/Installer Tool This piloted mandrel and support sleeve simplifies bushing removal and installation. Prevents damage to rocker or bushing.5118

Rear Rocker Stud AssemblyContains one hardened and ground bush-ing, one hardened and ground rocker stud with spool spacer and 3/8-24 nut for fender mount, one 1/2-20 hardened mounting nut and one lock tab.5115

Rocker Stud Bushing KitContains four hardened and ground rocker stud bushings, exact duplicate.5117 Big Twin Springer5163 Harley ‘45’ Springer

Lower Bearing GuardCentres lower race on stem.19382 BT 1936-48 (48361-38)19383 45 1926-57 (48363-40)

Springer Spot Light BarChrome, fits all Springers 1936-47, re-places 68616-46.19042 Spot light bar

Springer SpotliteReplaces 11366-38 for all Springer forks, 12 volt bulb type, 1938-48 style.4596 12 volt

Spotlamp Brackets Only19344 Black bracket set, ride control 19345 As above, chrome (11369-38)19347 Blk/nuts for above (68620-46)

19344

19347

9216

2319


Springer Rebuild

13206

1325913258Spring Fork Springs 45” & BT 37-57Outer & Inner Spring Sets- 4 upper and 4 lower springsPCP Item Finish UM OEM13258 Set Chrome

846055-3046056-3746059-3946057-3013259 Set Parkerized 8

Outer Springs Sets- 2 upper and 2 lowerPCP Item Finish UM OEM13223 Set Chrome 4 46055-30

46056-3713221 Set Parkerized 4Long Inner Springs Sets- For Side-car and Servi-carPCP Item Finish UM OEM13224 Lower Black 2

46059-3913225 Lower Chrome 2Inner Springs Sets- Curved, anti-rattle springsPCP Item Finish UM OEM13206 Lower Chrome 2 46058-3613226 Upper Black 2

46057-3013227 Upper Chrome 2

13223 13224

1322713226

Fork Rocker Rebuilding KitsPCP# 2319 includes parts shown except where noted as “not included”. All parts are interchangeable with OEM hardware.

BT 1930-482319 Complete hardware rebuild kit Servi Car 1941-57

5115 Rear rocker stud kit 5114 Front rocker stud kit 19315 Rocker set (45655-30, 45658-30)5116 Lock tab kit (6 pk)5117 Bushing set (45667-30) (4 pk)

45 Solo Model 1930-5219038 Complete hardware kit 9216 As above, Colony19318 Chrome rocker set with 5/8” holes19027 Rocker set, stock (45661-30)19319 As above with studs5163 Bushing set (45668-30) (4 pk)5118 Bushing installer/remover BT, 45 rocker19026 Lock tabs 1945-52 (pair)

Not Included

Not Included

Not Included

Not Included

2319


Fork Installation KitKit includes zinc neck cups with races pressed in, upper and lower bearings, top nut and black nut with dust cover pressed on. For 7/8” stem spring forks on G 39-57 and WL 39-52 models.19719

Knucklehead Spring Fork Bearing AssemblyIncludes bearing guard, cadmium plated neck cup set & stem nut, nickel plated cone nut with integral upper race, lower race and ball bearings. Fits EL, UL 36-48 & FL 41-48.19743

19313

Spring Fork Installation KitsComplete kits include zinc plated neck cups, ball bearings, upper and lower races, black nut with dust cover pressed on and park-erized top nut.PCP Application19311 Ball type 45”, Servi 1939-5719312 Ball type BT 36-4819313 Timken type BT 36-48

Ball Bearing Neck CupsAvailable in pairs in either cadmium plated cups only or chrome plated kit with races & balls.PCP Application5757 74”-80”, 1936-48 (cad cups, pr) (48311-36)5758 1930-52 45” (zinc cups, pr) (48310-30)19172 Chrome kit for 45 1939-57 (as above) 15700 5/16 Balls (50 pk) (8860)

BALL BEARING RACES74 and 80 BT Springer and early model Sportster type (1957-77) available. Each PC# OEM USE19049 48350-39 Upper/lower 45” 48346-39 1929-5719050 48345-36 Upper/lower 74-80 1936-48

Springer Parts

19311


Ride Control Strap SetTwo stainless steel straps, hardware not included. Fits EL 37-48, FL 41-48 & G 37-57.19734

Stainless Ride Control KitControls the action of the spring fork. Does not include slider rails or straps. Fits EL 36-48, W 36-52, G 36-73 & FL 41-48.19728

Spring Fork Shock Rod SetTwo steel shock units to replace rods on front spring fork legs. Zinc plated body with parkerized rod/socket. Fits EL 36-48, W 36-52, G 36-57 & FL 41-48.19742

Scissor Type Fork DamperFits Spring forks on WL 45-52, G 45-57, FL & UL 45-48.19610 Chrome19617 Parkerized

Springer Shock Assembly 46-57Includes all shock and mounting hardware for 1946-57 spring fork. Has a black finish and replaces 54200-45.PCP Description19807 Complete kit19595 Shock only19043 Hardware only19303 Bushing set (14002-45) 4 pcs

19595

Springer Parts

SPRINGER MIRRORSOriginal style black finished, great for restoration 1934-47, exact duplicate of the OEM part, made in U.S.A. OEM TYPE19087 11350-34 Stock19088* 11350-41M Military

*Military version features adjustable stem.

19610 19617


Springer Front AxleFit Big Twin 61-74 & 80, 1936-48, 1941-57 Servi-Car. Axle and spacer are chrome plated.PC# OEM Type3675 43872-36 Chrome Axle19044 43872-36 Black Axle19001 43884-36 Spacer19000 43882-36 Sleeve

RIDE CONTROL 1933-46Reproduces as original to control the ac-tion of the Springer Fork. Feature Chrome steel side bars with black control knobs. Replaces 11250-36 on 1937 up 61-74+ 80, 1940-47 45 models. USA Made.PC# OEM ITEM19808 11250-36 Complete Kit19866 As above Chrome19105 13421-33 Friction discs 4pc19106 13454-33 Bushings (pr)19107 13440-33 Control knob

Springer Parts

Steering Dampner AssemblyFor Springer available as a complete kit.PC# OEM Models19611 2776-36 BT 1937-4019039 46700-41 BT 1940-4519040 46700-46 BT 1946-4819041 46701-40 45 1940-57

Complete Springer Genuine Rocker Rebuild KitUse on all Springers, 45 type 1930-1952, as pictured. Use on non-removable drum type.19038 45” Rocker Rebuild

Front Brake Shackle Rebuild KitHigh quality reproduction of original Har-ley parts used on 1936-48 Big Twin and ‘45’ Springers.2321

Spring Fork Rocker KitKit includes studs and necessary mount-ing hardware to install the rockers on the inside of the fork. For use with 3/8” axle. Fits DL 30-35 & W, WR 36-52.19725

Complete Black BT Rocker KitRockers fit BT 1936-48 and Servi Car 1946-57. Includes locks, all studs and installed bushings.19314 Kit as shown19315 Black rockers only

Colony Steering Damper Upper KitReproduction of parkerized lever and all upper steering damper fasteners used on 37-52 45’s and 53-57 Servi-cars.72585

Colony Steering Damper Upper KitReproduction of chrome lever and all up-per steering damper fasteners used on 1936-48 BT.72584

Damper Rod Handle KitChrome lever and upper steering damper fasteners.PCP Application19194 EL, UL 37-39, FL 41-4819196 FL 42-48, EL, U, W 42-52 & G 42-57

1919619194


45” and Big Twin Fork LegsFork legs fit 1936-52 45” and Big Twin 1936-48 models. Fork leg has a 1/2” hole at the rocker area.

Handlebar End NutsExact reproduction of handlebar end nuts used on 1910-1974 Harley Davidson.7626 with 57/64-24 thread fits all Twins 1937-48.7625 with 13/16-24 thread fits 1922-30 all models. 1936 61” only, 1931-36 all models.9214 w/3/4-16 thread fits K, XL 1954-72, FL 1954-74.

Spring Fork AssembliesAssemblies include: full spring set, inner and outer, front and rear legs; rocker set with all studs and bushings; and spring rods with bushings. Top clamp, neck races, and cone nut; not included. 45 solo models have inside rockers for small axle and internal brake wheel. All other forks have offset mount rocker to allow inter-changeable wheel with lug bolt type drum. Chrome assemblies feature chrome front legs and outer springs. Some assembly is required.Chrome Black Model Type - 98905 Solo 45 - 98906 Trike 45 Servi98913 98909 Big Twin 74 offset

Speedster HandlebarsExact replacement of the In Line type Springer bars used on 74-80-45’s 1937-45, 1937-48 45 45 Models, 1936-57 Servi-cars replaces 55903-37. Painted or chromed as described; internals not included.Chrome Black OEM Description93011 93007 55951-36 (A) Speedster, inline 93020 93021 55901-37 (B) Standard, inline93013 93012 55950-36 (C) Buckhorn, inline93022 93014 55954-46 Speedster, offset 93016 Buckhorn, offset93023 93024 55901-46 Standard, offset19200 Internals for bars listed above9217 6033-30 Chrome pinch bolt9218 6033-30 Cad pinch bolt9508 4636 Parkerized pinch bolt

Springer

Rigid Rear Spring Fork LegPCP Application98902 1940-57 45 solo plain rear leg (45526-40)98917 As above, chrome98918 45 Servi black rear leg (45527-41

Front Spring Fork Leg98903 BT spring fork with rods (45610-40)98904 As above, chrome98919 45 black front leg (45610-40)98920 As above, chrome2318 Spring rods (pair) (45641-36)

Spring Rod StabilizerReproduction of original 1930s ac-cessory. Fits 1930-1948 all Spring-ers, includes 2 nuts.19029 Brass construction

Handlebar Throttle & Spark & Roller Pin KitHardened and ground rollers, pins and cable screw.8923 All HD 1910-48, OEM: 9281, 56278-10, 56283-318924 All HD 1954-74, OEM: 9261, 56278-10, 10-32 set screw

Throttle & Spark Coil Spool1918-48 (each)19536


Inner and Outer Throttle Spark Casing AssemblyPCP# OEM# Description19175 56502-32 1932-48 Outer, large, vinyl 48”19176 56502-32 As above, with cotton braid19177 1909-31 Outer, large, nickel19178 56528-49 1949-53 Outer, small19276 56528-49C 1949-53 Outer, small, cotton braid19179 56360-61 1961-on Outer, small19180 56373-09 All, inner wire 1909-6419181 56420-09 1909-48 Cable end

Throttle Control Parts All Models 1936-48PCP OEM Description51000 56271-36 Complete plunger kit19206 56245-35 Chrome spiral7626 56287-36 Cadmium handlebar end nut (pr)7625 3330-31 Cadmium handlebar end nut (pr)8923 9281, Handlebar control roller and pin kit 56281-31, 56278-1019268 Outer & inner wire w. plug 1932-48

Handlebar SpiralsPCP# OEM# Description19206 56245-35 1936-48 chrome19207 56220-48 1949-53 raw19208 56220-53 1954-70 raw19209* 56220-58 1971-74 throttle, rawNote: Reverses direction on 1954-70 throttle

Throttle Spirals and Cable KitsKits include all internal parts required for years listed.PCP Years Sides Throttle19200 1936-48 2 Push19201 1949-53 2 Push19202 1954-73 2 Push19203 1965-70 1 Push19204 1971-73 1 Pull

Handlebar

Handlebar PlungerReproduction of throttle and spark plunger OEM 56400-53. Fits FL 54-74, FX 71-73, XL 54-73 and Servicar 54-73. 1 plunger and 1 set screw per kit.9514

Spring Fork Dress Up KitKit includes stainless top bridge with two cap nuts and a 4-piece chrome cover set. Fits EL 36-48, W 36-52, G 41-57 & FL 41-48.19730

Springer Spring Cover Set4-Piece chrome cover set for top and bottom of springs. Fits EL 36-40, WL 36-52, G 36-57, UL 37-48 & FL 41-48.19343

Spring Fork Rod StabilizerPolished cast stainless steel stabilizer with 1/2-20 chrome cap nuts. To fit EL 36-48, W 36-52, G 36-57 & FL 41-48.19701


Short Stock Grip SetSmooth original style. OEM replacement #56205-62A. Set in-cludes chrome end plugs. Fits FL-FLH 1962-1973.5271 Black5272 White

1952 Style Stock GripsOEM replacement #56212-53. Replica-waffle style. Fits all H.D. models 1949-1961. Sold in pairs5437 Black

Waffle Style GripsNostalgic style waffle texture for 1974-up Twins, 1” + 1-1/8” 5440 Black set

Spring Fork Top Trees and RisersPCP OEM Description19310 (A) 4” Dog bones19103 56119-49 (B) Chrome tree with ears inline19198 (B) As above, zinc19221 56118-49 (C) Zinc tree with ears offset3062 (D) 4” Chrome Flanders risers19035 46550-36 (F) S.S. cover inline19267 46550-46 (F) S.S. Cover offset

Riser StantionsStantions fit spring fork top trees with 1” ears to allow rubber mounted glide risers to be fitted with 1 piece later style handle-bars. Sold in pairs.19173 Chrome glide risers19174 Zinc stantions

Handle Bar

5440

Flanders Style Riser Original type rubber mounted with 4” rise for Springer Dog Bone style top tee. Chrome plated pair.3062

Long 1909-34 Vintage Grip SetOriginal 1909 style grips used for restoration on 1909-34 models Replaces 3310-09. 1-1/8” ID on both sides.5540 Black23120 White23121 Red23122 Grey

Replica Short Grip SetFits 1935-48 and replaces 3310-35B.5543 Black23123 White23124 Grey

23120 2312223121

23124231235543

5437

Beck Grip Set1940’s Style for spring fork handlebars. 1-1/8” ID on both sides.23125

19173

19174

5540


Handle Bar

5½” Buco Style Handlebar1” Diameter bar with knurls in proper position for Flanders risers and dog bone triple trees. For use with snap throttle and 1” grips. Fits EL 36-48, WL 36-52, G 41-57 and FL 41-48.51832

Flanders Riser Sets for Spring ForksRisers fit 1” diameter handlebars. Available in chrome or cast solid brass. Cast brass generally has small surface imperfections like casting voids or pits. Brass may dull with age but can be re-polished to a high lustre. Brass is soft so care must be taken not to dent them with a wrench or hammer. Fits FL 41-48.Chrome Brass Size

- 51605 2”51604 51603 3.5”51602 51606 5.5”

Brass risers are machined from forged shape billet.

Flanders Riser Conversion KitKits include zinc triple tree, stainless inline triple tree cover, chrome 5.5” Flanders risers and bolts. Fits EL 36-45, WL 36-52 and FL 41-45.19746 51605

5160651602

51604 51603

51604 51605

Chrome Triple TreeCast steel inline spring fork triple tree without ears. ½” Mount holes for risers. Fits stock or custom spring forks. Fits WL 29-52, G 29-57, EL 36-40, UL 38-45 & FL 41-45.19729

Spring Fork Offset Top TreeOffset spring fork tree with ears and satin nickle finish. 11” Overall length. Fits stock or custom spring forks. Fits UL & FL 46-48.19242


Handlebar PlungerAccurate reproduction of throttle and spark plunger. 2 plungers per kit for the following:PCP OEM Description9505 3316-36 1936 61”, BT 1937-48, 45 Solo and Servicar 1940-489804 3316-31 45 Solo and Servicar 1931-39, VL 1931-36

Throttle & Spark Cable BracketsFeature per finish and hardware.PC# OEM # Year/Model Type19078 3371-36 A 1936-48 OHV BT Throttle19079 3371-37 B 1937-48 SV BT Throttle19080 9967 C 1930-73 45” Throttle & Spark19081 55627-38 D 1930-48 SV BT Spark

Handlebar Bolt KitDuplicate of pinch bolts used on 1936-48 BT Springers, 1940-on 45 Springers. OEM 4636 includes lockwashers.9217 Chrome9218 Cad9508 Parkerized

Handlebar

Handlebar Cross BarCurved, 1” bar features milled ends and fits 1936-57 spring fork bars. Includes 2 chrome clamps and bolts.19847

Complete Spring Fork Handlebar AssemblySpeedster style bars feature cloth covered wires, chrome horn and dimmer switches and are fitted with all internal throttle com-ponents including cables and grips.93025 Black inline93026 Chrome inline93030 Black offset93031 Chrome offset

Spring Fork Handlebar Hollywood style handlebar with cross bar includes internal throttle components, cables, grips, chrome horn and dimmer switches with cloth covered wires. Fits 1936-40 EL, 1936-52 WL, 1936-58 G, 1938-45 UL and 1941-45 FL. PCP Finish Type93036 Black Offset93037 Black Inline93038 Chrome Inline93039 Chrome Offset

Colony Front Brake Cable Handlebar ClipParkerized clamp (9980), screw, nut and lockwasher for use on 1928-48 BT and 1932-57 Servi-cars.72628

93036

93037

93038

CLUTCH & BRAKE LEVER PIVOT SCREW KITCad plated reproduction of pivot screws and nuts used on clutch & brake levers. Big Twins & 45’s 1941-1964.5409


Handlebar-Front End

Chrome Spring CoversAvailable to fit upper and lower springs and rocker studs on Big Twin. Order as required for 1936-57 spring forks.19386 Lower round (pair)19388 Rocker with bird (pair)

Spring Fork Windshield 36-47Shield includes zinc fitting for handlebar mounting. 52144

1941-48 BT Spring Fork Cable & Handle KitIncludes replica style cable with oiler fitting and end ferrules, a polished or chrome handle and clamps to attach cable to bars and fork legs. PCP Handle Finish50238 Polished50239 Chrome

Replica Brake LeverChrome reproduction complete as pictured for 1928-40 Springer models. Replaces 45002-28.50237

Replica Lever AssembliesInclude slotted lever bushing as original with small hole for brake or clutch. PCP Finish Item50208 Chrome Complete assembly (45002-41)50241 Chrome Complete with ball end50261 Polished Slotted lever with ball end50242 Polished Lever only with ball end 50244 Lever only, stock style (45017-41)50245 Chrome Lever only, stock style16280 Lever clamp strap5409 Cadmium 1941-64 Pin and nut (45031-41)10160 1949-64 Lever bushing w/cotter (45033-49)

1941-64 Replica Brake Clutch HandleFeatures accurately formed clamp and cadmium plated hardware to replace 45002-41.50236

50241 50242

50245

50244

50238


Colony Seat Post Bushing Installation ToolHeat treated with a black oxide finish. Use tool to install seat post bushing.72087 45 and Singles 1929-on, VL 1930-36

Frame Related

45 SOLO TOOL BOX BRACKETFits 1941-52 45 solo. Replaces 64450-41. USA made, zinc plated.19074

Rear Stand Pivot BoltFits BT and 45” 1938-57 models. Replaces 49570-38.19589 Each

45 Footboard Support Rods19391 Solo models 1932-52

BT Side Car Connector Kit Comes complete with upper, front and lower fittings.19590 87136-37 Sidecar front tire rod

Left and Right Sidebar- Front and rear Support Rod Mounting KitAccurately reproduced special shoulder nuts, nuts and washers fit all 45’s 1932-73.PCP Description9802 Parkerized

Rear Frame StandsFits rigid 74, 80 and 45 models. Has painted or chrome finish and requires stand clutch and mounting hardware to be ordered separately.PCP OEM Application19813 49502-36 1936-52 45 Solo, painted 19840 As above, chrome19077 49581-36 45 Solo catch, black19273 As above, chrome

Rear Stand Mounting HardwareParkerized hardware kits are an accurate reproduction of original Harley fasteners used to mount the rear stand.19014 BT SV 1930-36 (4526-35)19015 OHV 1936, BT SV 1937, 45 1936-3819022 45 1939-on9616 As above, chrome

Sidecar Body Support Rods Stud Repair KitComplete kit contains studs, bushings, washers and nuts to rebuild your support rods back to factory specs. Used on 1941-84 models.72433


Floorboard Extension PadsPads clamp on to 1914-65 style floor-boards. Replaces 52654-33, 52655-33, 52668-33.19444 Parkerized19445 Chrome

45 Floorboards BracketsFits all 1929-52 solo models 1933-73, Servi car, 4 piece set, black, OEM type.5500 Brackets Only

Footboard Hinge Bolt Kit Cad plated reproduction of special shoulder bolts used to mount footboards on all Harley Davidson 1914-up.5364

Early H.D. Footboards WITHOUT Black PadsFit 1914-39 (2938-14)3777 Raw finish

Jiffy Stand Parts 45 Solo 1929-52PCP OEM Description19389 50002-32 Complete assembly, black19398 50002-32 Complete assembly w/chrome leg13232 50012-30 Spring, black 13231 50012-30 Spring, chrome19070 50035-30 Spring plate, zinc19397 50045-32 Mount bracket19071 50060-30 Jiffy leg, black 19446 50060-30 Jiffy leg, chrome19072 50092-30 Leg bushing19073 50110-30 U-bolt (ea) 19349 As above cad plated

Frame Related

Footboard Stud Mounting KitParkerized duplicates of original fasten-ers used to mount footboard studs.9905 BT 1936-57 (shown)9906 Servicar & 45 Solo 1935-on

Rear Fender Mounting Strap 1936-5719329

Colony Jiffy Stand Leg Bracket U-Bolt KitParkerized 1723-30 u-bolt, nuts and lockwashers used on 1930-52 45” Solo and 1930-36 VL.72653


Footboard Mounting Stud KitCorrect parkerized reproduction of studs, nuts and washers used to mount floorboards.PCP Application72605 1914-22 All models (2948-14 stud)72606 1914-28 All models (2949-14 stud)72607 1925-28 All models (2951-24 stud)

Footboard Mounting KitsCorrect parkerized reproduction of studs, nuts, and washers used to mount floorboards.PCP Application72579 1935-73 45’s and Servi-car

Frame Related

Original Style Buddy Seat (Vinyl)96163

Replica Thin Style Solo SeatBlack leather seat features rolled sewn edge with a black rivet strip. Vented steel base plate accepts T-bar type mounting sys-tem. Order mount bar and hardware separately. Fits WL 29-52, VL 30-36, EL 36-40, UL 37-48 and G 37-72.96020

45 Tool Box KitKit includes chrome tool box, zinc bracket, mount kits and two keys. Bolt on bracket. Fits 1941-52 W models.19702

Parkerized Seat Post AssemblyHeavy duty seat post assembly with installed springs, hex nuts and spacers. Swivel top tab pin is pressed in place as original. Seat post diameter is 1.180”. Fits EL 1936-40, UL 1937-48 and FL 1941-8082090

Black Leather Deluxe Solo Seat KitKit includes black tee, hardware, heavy duty parkerized post and black leather seat with royalite skirt. Fits W 36-52 & G 36-73. 96064


Skid Plate Mounting HardwareReproduction of fasteners required to mount skid plate on 1940-42 WLA.72590

Legshield Mounting KitAccurate reproduction of all fasteners required to mount legshields on 1940-42 WLA.72597

Machine Gun Bracket and Ammunition Box Mounting KitCorrect reproduction of all fasteners used to mount OEM 11202-42M and 11201-42M brackets on 1940-42 WLA.72554

Colony Seat Post Rod, Nut and Spacer KitReproduction of OEM 14-¾” seat post rod. Includes nuts and spacers. For use on all HD WLA and WLC models.72583

Colony Seat Post Rod, Nut and Spacer KitReproduction of OEM 15-7/8” seat post rod. Includes nuts and spacers. For use on all 1936-80 BT except FX.72612

Frame Related

Colony Seat Post Rod, Nut and Spacer KitReproduction of OEM 15-7/8” seat post rod. Includes nuts and spacers. For use on 1929-73 45’s and Servi-cars except military models.72659


PCP OEM Year Model93010 49035-35B 1929-73 45 Solo and Servi, black93019 49036-35 1929-73 As above, chrome

45” CRASH BARSFits 1929-73 Solo, Servi-Car front 1936-73PCP OEM TYPE FINISH93008 49150-29B Rear 1929-52 Black93018 49151-29C Rear 1929-52 Chrome

Highway BarsWARNINGS: These Highway Bars are for cosmetic use only and will not provide leg or vehicle protection in the event of a low-speed fall. They are not made or intended to provide protection from bodily injury in a collision with an automobile or any other object.

WARNINGS: These Highway Bars are for cosmetic use only and will not provide leg or vehicle protection in the event of a low-speed fall. They are not made or intended to provide protection from bodily injury in a collision with an automobile or any other object.

WARNINGS: These Highway Bars are for cosmetic use only and will not provide leg or vehicle protection in the event of a low-speed fall. They are not made or intended to provide protection from bodily injury in a collision with an automobile or any other object.

“U” ClampsForged design like OEM.PCP OEM Application19280 31734-36 74-80 Spark coil (pr)19281 31735-29 45 Spark coil (pr)19075 49061-32 45 Front engine bar (pr)19284 49177-38 45 Rear engine bar (pr)19073 50110-30 45 front jiffy stand (ea)19285 87701-79 Rear late side car (pr)

45 Rear Bar Mount KitKit includes 49180-36 studs (2), 49177-38 “U” clamps (2), and 66302-29 mount plate for solo models 1938-52.PCP Description19076 Complete kit19115 Mount plate19116 Stud set

Front Safety Guard Mounting KitsReproductions of u-bolts, nuts and washers to mount front safety guards.

Chrome Parkerized Year Application OEM

72204 72203 37-47 61”, 74”, 80” 49064-3672768 72767 32-73 45” 49061-32

Colony Rear Crash Bar Mounting KitParkerized u-bolts (49177-38), studs (49180-36), plate (66302-29), nuts and washers used to mount rear crash bar on 1938-52 45” solo models.72682


Front Fender Mounting KitReproduction of stock Harley hardware used to install stock fend-ers.Chr. Cad Parker. Description9742 2179 9680 Springers 1936-48 - - 5162 Locks only (parkerized)

Spring Fork Front Fenders Are full width 7-1/2” for 16” or 18” wheels with riveted on braces. 45 type fits with rockers inside the forks. BT fits with outside rock-ers. PCP Application88205 BT 1936-46, replica w/thin braces 88218 45 1937-5227285 Lower brace set BT 1936-48 (59135-36)4501 Stainless steel trim for above

Front Fenders

Frames - Fenders - TanksWe suggest pre-fitting all component parts including engine and transmission assemblies before painting or final assem-bly of a frame, fender or tank.

Springer Front Fender for ServiCars & 45’sA genuine reproduction of the original. This fender is the final touch for your restoration or custom needs. Fits all Servi-Cars 1949-53, 45’s 1949-57 and can also be used on 1936-48 Big Twins as a custom application.6008 OEM 59007-50

Springer Front FenderStainless steel fender trim set. Relaces OEM #59200-39. Fits all 1940-48 all models; 1949-up 45’s. Complete with clips. USA4501 Kit

Fender Trim Fastening ClipReplacement trim clips only. Replaces OEM #59225-39. 5548 1939-48 (25 pack)

Spring Fork Fender KitIncludes 6” wide front fender shell and black bracket. May be installed in front of or to rear of spring fork. Fits W 36-52, G 36-57 and FL 41-48.88219Early Fender Emblems

Sold as pairs, deluxe & OHV types. Nickel plated with stud & nuts attached to mount to saddle bags, fenders.2111 Deluxe (11530-46)2112 O.H.V. (91583-52)12640 Speed nuts (10 pack) (7613A)

Installed behind

Installed in front

88205


Rear Fenders

45 Rigid Rear FendersFully assembled and riveted together with hinge. 88000 and 6005 have relief over skirts to accept stainless fender trim attached by clips. #88001 and 88007 have 1936-38 rear tail lamp shroud attachedPCP Application 6005 45 Solo 1937-46 (59612-41)19368 45 Solo side skirt set (4pcs)88103 Fender end 45 1950-52 (59699-49)

6005

Luggage CarrierFits 45” rigid frames only. Includes military saddlebag mount bracket fastened in place. Army finish.19838

Parkerized Luggage Carrier Mount Kit PCP Application72347 1926-41 DL, RL, WL, 45’s72348 1942-on WL, WLA, WLC 45’s

Rear Stand Clip for 45 Models (Black)Original-style rear stand clip fitting all Big Twins 1936-57. Clip comes pre-drilled and ready for mounting. PC # OEM # Description19077 49581-36 Rear Stand Clip 45 Solo 1936-52

Chrome Old-Style Luggage RackReplica of the early accessory rack, used on all rear fenders 1935 & up. Great for attaching throw-over saddle bags. Does not inter-fere with Buddy or Police style seats on post.3215 Rear luggage rack

Rear Fender Trim-USAStainless steel fender trim set. Fits all 1939-48 all models. Com-plete with clips.4505 BT 1939-48 (53900-39)82033 Side car trim kit 1936-67 (87925-39)82034 Servi car trim kit 1939-67

Rear Fender Brace Bolt KitParkerized OEM 3743-23 bolts, nuts and washers used on 1923-40 BT.72460

Early Fender TipsEmbossed Eagle Type fits 1935-46 fenders. 4343 Front 1935-48 (3724-48B)4344 Rear 1935-46 (3724-48A)


Front Fender Lamp Wire Kit Steel tube, clamps, nuts, connectors, wire and loom will secure wire to fender as original. Duplicate of OEM kits, fits all models 1935-47. 9786

Speedo Cable ClampsExact duplicate of original Harley clamps.Item PCP ApplicationA 9646 74 & 80 Sidevalves 1936-38, 61 & 74 OHV 1936-51, parkerized (67075-36)B 9647 45 Solo 1937-85, Servi-Car 1937-56, parkerized (67074-37)C 9648 45 Solo 1941-52, parkerized (67076-41)D 9649 74 & 80 Sidevalves 1939-48, parkerized (67086-39)

Colony

Chrome Saddle Bag Mounting PlatesUse on rigid frame fenders 1936-57 or can also be bolted to swing arm struts. Exact stamped, as original. Use saddle bag mounting ovals to mount stock or custom bags to rigid frames!4443 Pair

Fender Hardware

Colony Rear Fender Mounting KitReproduction of stock hardware used to mount rear fender.Chr. Cad Parker. Application9708 1793 9707 BT 1936-579790 9791 9792 45 Solo ‘29-52

Colony Saddle Bag Mount KitCad plated studs, chrome plated acorn nuts to install saddle bag mounting plates on all models 1934-57.5203 Kit

Colony Utility Saddlebag Holder KitAccurate reproduction of OEM style fasteners (11724-X) used to hold saddlebags on 1936-38 BT.72634


45 TANK FILLER STRIPReplaces OEM# 3502-37B. Use on all 45’s, 1937-52 19097 Cadmium plated19240 Zinc plated

1941-46 TANK TRIMIncludes 4 stainless strips, 2 (61801-41), 2 (61799-41)4409 Trim (4 pc.)5567 Mount Strips (4 pc.)

4409

5567

TOP OF TANK SCREW AND WASHER KITDuplicate of original Harley hardware used to mount tank to frame on all Harley 1918-1936, 1936-1952 45’s. Kit includes paper gas-kets to avoid paint chipping as original.5411 Nickle Plated5412 Cad Plated

CARB SUPPORT BRACKETS Exact replica for Linkert carbs

OEM Model # Year19084 1110-33 SV BT C 1930-3819085 1110-39 SV BT D 1939-4819086 27432-36 45 Models E 1936-5845 Tank Set

Oil and gas tank set fits Solo and Servi car 1936-73. Tanks will accept cateye dash plate and gas shut off rod kit. Shift gate mount holes 3 3/8” c/c.PCP Description89060 Tank set19244 Gas shut-off kit19169 Chrome cap set19184 “Oil” cap only9894 Chrome mount bolt9895 Cadium mount bolt9896 Parkerized mount bolt

Oil DipstickReplaces OEM 62631-37 on all 45’s 1937-7319286

Gas Tank

SHIFT GATE for 1940-46 Gas TanksFits 45, 61, 74 and 80” models.PC# OEM Description19090 33785-40 3 Army, c/c 3 1/419091 33790-39 3 Chrome 19092 33791-39 3 & R Chrome19093 33789-37 4 Chrome5207 33822-36 3 & R Chrome gate screws (3)


Shut Off Rod Knob Kit 1941-65Knob and seal cap are cad plated. Kit includes all pieces as shown.19396

Gas Tank Mounting KitIncludes fasteners used to mount gas tank on 1937-52 45 Solo and 1937-on Servicar.9894 Chrome9895 Cad9896 Parkerized

Bob Gas ValvesValves include complete shut off rod and seat assembly for 61” and 74” models with left tank reserve. Includes spring and sealing washers.PCP Description684 Gas valve assembly BT 1950-6519243 As above, w/rubber compresssion 45” 1950-5719244 As above, w/flared gas line 45” 1941-4920010 Shut off rod kit 45” 41-49 with viton seal14071 Seals (10 pack) (62085-40)19245 Rod hardware kit 1941-6519246 Shut off rod seat 1941-49 (62075-40)19247 Shut off rod seat 1950-65 (62075-50)

Gas Tank

684

Colony Manifold NipplePCP Application9422 45” 1937-739423 74-80 SV 1930-48

45’s Inlet Pipe AssemblyReplaces OEM #27011-36. Use on all 1936-up 45’s19054 Manifold5218 2 Nuts Only692 2 Brass Seals

SHIFT GATE for 1947-65 Gas TanksLate type for 45 models, fits 1947-65 tanks. 3 1/2” c/c mount holesPC# OEM SPEEDS19094 33791-47 3 & R BT19095 33789-47 4 BT19096 33790-39 3 BT

Gas Tank Shut Off Valve Extension KnobAllows for easier operation of the shut off valve used on 1940-65 gas tanks.1801

Colony Gas Tank Shut-Off Rod Upper KitReproduction of upper mount-ing parts used on all BT 40-65 72702

Gas Tank Mount KitIncludes 3 tank mounts, brackets, shifter tube, 2 bayonet filler bungs, lower threaded fitting insert, right side fuel nipple and top threaded insert for the fuel rod. Raw steel, must be welded on.19741

19244

19243


Shut Off Hardware and Gas Tank Fitting Kit# PCP Description1 1801 Chrome knob 1940-65 (91690-49)2 19248 45” Shut off spacer 1940-65 (62096-40)3 1807 Gas tank fitting kit 1940-65 (3 pcs)

Linkert Carburetor FittingChrome fitting with O-ring designed to use 1/4” flexible hose on Linkert carbs.1732

45 Mikuni Carb KitIncludes 34mm Mikuni carb, adaptor flange to fit 1936-52 stock manifold #27024-36, Anderson style 1” twist grip assembly, air cleaner and cable. Order carb manifold separately.PCP Item21870 Carb kit19054 Manifold

Carburetor Control Coil ClipCad plated reproduction of OEM 9959 clip used on 1949-57 45’s. Also used as timer wire clip on 1961-64 Servi-car.72552 Pair

Manifold Inlet NipplesParkerized duplicate of OEM 27045-32 nipples used on 1937-47 61”, 74”, 80” Big Twin, Sidevalves and 1952-56 K, KH.72636 10 pack

Carb

Linkert Low Speed Needle ValveAccurate reproduction of OEM 27340-33 needle valve used on all 1933-47 1” carburetors. 3-1/16” Long needle with type 1 (large) head.72707

Linkert Low Speed Needle ValveAccurate reproduction of OEM 27340-33 needle valve used on all 1933-47 1” carburetors. 3-1/16” Long needle with type 2 (small) head.72708


Flathead Intake Manifold Cast iron manifolds with brass packing rings and cad plated nuts.19054 45 WLA 1936-73 (27011-36)19189 74 & 80 ULH 1937-48 (27012-37)5218 Chrome manifold nuts 1937-73692 45 Intake manifold brass seals (pair)

Linkert

Linkert Carb Float Lever 19225 27381-50

Carb Throttle ShaftsPCP Description19580 Throttle shaft and bushing kit 45 1936-on19581 1-1/4” Throttle shaft BT 1942-48 (27275-24)19582 1” Throttle shaft Linkert 45 1936-54 (27275-26)19583 1-1/4” Throttle shaft kit 1-1/4”19584 1-1/2” Throttle shaft BT 1940-65 (27276-40)19585 1-1/2” Throttle shaft and bushing kit 1940-on

1-¼” Carburetor Throttle DiscPart Fitment16083 G 1936-1954, UL 1937-1948, and WL 1937-1942 (27280-24)16084 +.030 oversize WL 1929-1952 (27280-24A)

Intake Manifold NutsPrecision machined duplicates of original Harley part. These manifold nuts are guaranteed to fit and seal properly. Now avail-able for the following Harley Davidson engines:1940-54 O.H.V. 74’s, 1953-56 K,KH1688 Chrome Plated5121 Cad Plated

1930-48 74 & 80 Flathead; 1936-39 61 O.H.V.; 1940-46 WLD5164 Chrome Plated5160 Cad Plated

1937-73 Harley ‘45’5218 Chrome Plated5219 Cad Plated

Intake Manifold NippleThreaded steel nipple is exact duplicate of original Harley part. Packaged complete with oversize rivet and heat resistant “O” ring to prevent leakage.All O.H.V. 74’s 1940-54.1700

Intake Manifold SealsPrecision machined brass seals are duplicates of the original Har-ley part. Available for the following Harley Davidson engines:1689 1940-54 O.H.V. 61/74’s, 1953-56 K,KH692 Harley ‘45’s5159 1930-48 All Sidevalves except ‘45’s, also 1936-39 61 Knuckle


Replica Linket CarbCompletely assembled with all internals.PCP Type Year Model41041 BT SV 1937-48 M5141043 BT OHV 1941-65 M74

Linkert

Linkert Complete Carb Hardware Assembly KitIncludes all parts except body. PCP Size Model41044 1-½” M74B FL 1948-6541045 1-¼” M88 U-UL 36-48, WL/A 1937-52

Linkert Overhaul KitIncludes needle and seat, float, bushings, springs, float pin, gas-kets and hardware for 1933-65 models.. PCP Item41047 Complete kit with nitryl float41049 Complete kit with brass float41050 Kit without float19109 Brass float only

Reproduction Linkert Carb PartsPCP OEM Item Model Type19109 27380-33 Float All Brass19110 27260-49 Arm & Big Twin 49-65 27265-49 Bracket 19111 27225-48 Choke Big Twin M-74B19112 27363-41 Venturi Big Twin M-74B

Replica Linkert Carburetor Float LeverFits FL 1941-1965 and replaces 27381-50. Sold each.16122

41050

41045

41041

41047

41049

19109


Linkert Carb HardwarePCP OEM Item Application16117 27037-33 Early float bowl16016 27043-41 Spacer 45 WLA16017 27215-33 Choke shaft 45 & SV BT16018 27218-48 Choke shaft BT 1930-47 all16019 27219-36 Air in shaft stop BT16054 27225-24 1-¼” Choke disc 1930-47 19111 27225-48 Choke disc BT 74B16062 27252-37 Lever ULH +45, 1935-4816082 27260-40 Lever 1940-47 OHV19110 27260-49A Throttle lever with 27265-49A BT arm set13000 27270-49 Lever screw spring19582 27275-26 1” Throttle shaft 4519581 27275-24 1-¼” Throttle shaft 4519584 27276-40 1-½” Throttle shaft BT16083 27280-24 1-¼” Throttle door 4516084 27280-24A Oversize throttle door16085 27280-40 1-½” Throttle door 61”16086 27280-40A Oversize throttle door16087 27280-51 Throttle disc (9-X) BT18537 27290-24 Shaft bushing set13013 27291-32 Shaft spring16088 27297-27 HS Needle valve 45, BT16089 As above Oversized16090 27298-40 HS Needle WLA16091 27297-40 HS Needle valve BT 1940-4916092 27300-50 HS Needle valve BT 1950-6516093 27318-41 Fixed Jet 45 1941-43, BT 1941-5416094 37318-50 Fixed jet #18 BT 1951-6516095 27318-50 Fixed jet #19 BT 1951-6513014 27330-33 Nozzle spring (10 pk)16110 27331-33 Main nozzle SV 1933-5316111 27331-40 Main nozzle OHV 1940-5116112 27332-50 Main nozzle BT 74B16113 27337-27 Low speed needle valve All16114 27340-33 1”, as above16115 27345-41 Spring collar13015 27349-27 Needle valve spring72332 27362-30 1-1/16” Venturi 4572338 27363-41 1-5/16” Venturi M74B19112 27363-41 As above72342 27364-41 15/16” Venturi 45WLA16118 27371-36 Late float bowl8901 27375-29 Chrome lock nut8902 27375-29 Cadmium lock nut79129 27376-28 Nut gasket19109 27380-50 Brass Float16122 27381-50 Replica float lever16123 Float pivot nut and bolt16055 27382-33 Needle and seat16125 27383-11 Float pivot pin w/caps16126 27383-11A Float pin w/caps16127 27390-33 Bowl valve cover cap16128 27391-36 Bowl gasket16129 27395-27 Needle valve lever16130 27397-27 Valve lever screw13016 27405-26 Choke mech. spring1503 27450-36 Cable block end

Linkert Carb Float Valve and SeatReproduction of OEM 27382-33 float valve and seat. Includes 27402-33 gasket used on 1933-65 Linkert carbs.72880

Linkert

16118

19109

1503


Crossover Fit Tank to TankTin finish unless noted.PCP OEM Description19484 62355-40 BT OHV 1940-47 3608-40A19485 As above, chrome 19486 62355-48 OHV 194819487 62355-48A OHV 1949-56 3606-48A19490 62355-52 K model 1952-5619491 As above, chrome12601 62361-50 Gas line nut, cad (each)14099 62360-50 Gas line rubber sleeve 50-65 (10 pk)

Gas Line

Steel Gas LinesFit tank to carburetor, tin or chrome finish.PCP OEM Description19492 3606-32 VL 1930-3619493 3607-37A WL 1937-3819494 3607-41M WL, GE 1942-4919495 As above, chrome19496 62354-50 WL 1950-65, GE 1953-6519497 As above, chrome 19498 3607-37 UL 1937-3819499 3608-39 UL 193919500 3608-40 UL 1940-41

PCP OEM Description19501 3608-42 UL 1942-4819502 3607-36 OHV 1936-38 19503 3607-39 OHV 1939 19504 3607-40 OHV 1940-4119505 3607-41A OHV 1942-4919506 As above, chrome19509 62355-52 K model 1952-56

Thick Style Early CablesCables feature a zinc plated, .42” thick outer housing for early FL trans drive and 45” rear wheel drive.Zinc OEM Application47408 67026-36A BT 1936-6147412 62025-37 45” 1937-5247413 1937-73 45” Solo with late type 1962-on Speedo head


Speedo Drive UnitsOEM replacement unit includes housing and gear for transmis-sion drive.PCP Application4631 1936-61 BT 11T (67130-36)3888 Gear and shaft only 1936-61 BT 11T (67135-36)2329 1937-52 45 Solo 8T(67129-39B)19064 Retainer for above #232916513 1938-61 45 Servi 8T (67131-38)16516 1962-73 45 Servi 13T (67131-62)

SPEEDOMETER RATIO GUIDE TRANSMISSION DRIVE FRONT WHEEL FL 1941-E61 11 Tooth 2-1 Ratio FX 1973-79 & 81 On 2-1 RatioFL L1961 13 Tooth 2-1 Ratio FX 1980 1:1 RatioALL 45’s with rear wheel drive are 2:1 Ratio

Cateye Dash KitsCan be mounted on all 74”-80” Big Twins 1936-1983, and 45 models 1936-1953, 1936-73 Servi-Car models.6306 1:16307 2:1

Speedo Cable ClampsExact duplicate of original Harley clamps.

Item PCP Application Finish OEM

A 9646 74 OHV 36-51 Parkerized 67075-36

B 9650 OHV BT 52-56 Parkerized 67075-52

C 9651 OHV BT 57-61 Parkerized 67074-57

D 9652 OHV BT 61-80 Zinc 67074-57A

Preston CablesBlack DescriptionFL Models4201 FL’s (Male end) 41-61 (67026-36A) 45” Models 4195 1937-52 45” Solo (Male Head) (67025-37)4197 1962-73 45” Servi-Car (67028-62)

0-120 MPH Replica Domed Speedometers Features domed glass lens with stainless narrow bezel in 2:1 ratio with a 5/8” male cable fitting. Includes reset knob.PCP Application48444 (A) 1936-3948445 (B) 1940-4548446 (C) 1946-47

Speedo/Dash

Replica Beck Speedo 2:1 RatioOriginal 1950`s style with red face and white lettering. Use with 11T transmission drive unit. Accepts 5/8” nut.Fits FL 41-61, EL 36-40, WL 3652 & UL 36-48.48514

Vintage Style Police SpeedosWhite face with gold highlights and 0-100mph numbering. Features reproduction Stewart Warner artwork. These are not endorsed or manufactured by Stewart-Warner.48517 1:1 FL 62-80, FX 71-72 & 80-8348518 2:1 FL 41-84, EL, W 36-52, G 36-67, UL 38-48,

6306

48444 4844648445


Flathead 74 & 80 Oil Line SetsVLs are cad 2 piece sets and UL, ULH are 3 piece sets.PCP Description19401 Set VL 1934-3619402 Set UL, ULH 1938-4819403 As above, chrome19404 Feed line UL 193719405 Feed line UL 1938-4819406 Vent line UL 193719407 Vent line UL 1938-4819409 Return line UL 1938-48

45 Flathead and Servicar Oil Lines 1938-73Cad Chrome Description19410 19414 3 piece set19411 19415 Feed line (63510-37)19412 19416 Vent line (63570-37)19413 19417 Return line (63507-38)19436 - Vent nipple (25235-36) (also OHV 36-41)19437 - Black rear chain oiler (63590-41)19438 - Banjo bolt (63573-36)14007 - Brass washer (6440) (5 pack)

Chrome Nipple Nut & Tube EndWill attach to tapered tank 63533-15 type fit-tings and will accept braided or rubber hose.PCP Description19372 Nut (3 pack)19374 90 Elbow w/nut (3 pk)19375 45 Elbow w/nut (3 pk)

Oil Lines XLH & KLines are cadmium plated and include nuts and seals.PCP Description10573 Return line nut (pair) (63527-50)14097 Return line seal (10 pack) (63529-50)14099 Vent line seal (10 pack) (62360-50)

Inner Primary Drain TubeFor sheet metal early Big Twin primary tube and nut.PCP Application19376 1937-58 Rigid (60546-36)19377 1959-64 SA (60546-59)19378 Fitting for cover (60548-36)

Oil Lines

Oil Line Fitting KitThese oil line fitting kits include 4 cadmium plated fittings for use on OEM frames when an external oil filter is used. Fittings will work with the aluminium cover oil pump only.4653 Rigid frame 1936-574654 Swingarm frame 1958-64

46544653


Cad Big Twin Pump and Filter FittingsPCP OEM Application10574 63533-15 1915-64 Oil pump cover to line (ea)10592 26424-50 1950-64 Oil pump cover to line (ea)10571 63526-50 1958-64 Oil pump cov - filter line (pr)10569 63525-50 1940-64 Oil filter line connector (pr)10568 63524-50 1951-64 Oil filter line connector (ea)10573 63527-50 1950-64 Oil filter line nut (pr)10591 63871-50 1941-64 Oil filter cap adapter (ea)

Original-Style Oil Pump Fittings for HarleyOriginal-style fittings for Harley Big Twins. Also used with some custom oil tanks to convert nipples so stainless-steel braided lines can be used.4657 Set of 3 for nylon and braided hose1722 Chrome set of 3 fits steel and braided fixed-end lines5119 Cad plated as above 1936-64Knucklehead Rocker Box Oil Line Fitting One kit contains 2 rocker box and 1 motor case fitting, chrome plated.1741

10571 10568 10574 10592 10569

Oil Lines

Oil Canister Rebuild KitIncludes all small parts and gaskets for rebuilding.25606

Oil Line Straight Tube With Nut 1936-6419373 3 Pack

Banjo Bolts and WashersPCP Application19438 Vent bolt (63573-36) (each)14007 Vent bolt washer (6440) (5 pack)19436 Vent nipple 45 1938-73, cadmium (25235-36) (ea)19379 Feed & return bolt (3570-36A) (each)19380 Feed & return bolt washer (3570-36B) (10 pack)

1722


45 Outer PrimaryAvailable original or with accessible clutch area for 1937-63 Solo and Servi-Car. Both may be cut out for electric start.PCP OEM Description911 60557-36 Chrome derby cover25158 60565-36 Derby cork gasket (10 pk)871 60572-36 Chrome inspection cover79426 60567-36 Inspection cork gasket (10 pack)19837 Chrome 45 outer primary 19825 45 Custom outer primary (raw)19830 45 Custom outer primary (black) 19835 45 Custom outer primary (chrome)

Inner/Outer Primary Cover Mounting KitThis complete mounting kit contains reproductions of the original Harley hardware used to mount the inner and outer primary cov-ers on VL Harleys and 45’s 1930-on.5294

45 Inner Primary for Solo or TrikeFits 1937-63 Solo and Servi-Car. Black finish.3396

Primary

Rigid Chain Guard 1936-52PCP Model5529 45 Solo chrome (60303-36)5530 45 Solo, raw (60303-36)82020 45 Solo, black powder (60303-36)

Inner Primary Chain Guard Mounting KitComplete mounting kit contains the following: 3813-29 bolts, 3815-29 cupped washers, 3814-29 springs, 0215 washers, 0108 nuts, 0290 cotter prins. Fits 1929-40 45’s and 1929-34 Singles. Parkerized72283

Rear Chain Guard Mount Kits for 45”Kit includes bolt, nut, spring, cotter pin and washers.PCP Description9744 Solo 45” 1936-52 and Servi to 1973 chrome9745 As above, cadmium9746 As above, parkerized

Front Chain Guard Inner Primary Cover Mounting KitReproduction of OEM 60648-39 screw plugs and OEM 60650-32 washers used on all 1939-73 45’s and Servi-car.72521

82020

97469745


45 Solo Front Wheel AssembliesIncludes rim, replica original finish hub and bearings, laced with stainless steel spokes.PCP Size Rim70980 16" Chrome70981 16" Black70982 18" Black70983 18" Chrome

PC# OEM# Description1 2511 43546-36B Chrome Hub 1936-66 complete2 1307 43549-36 Rear Wheel Bearing Hub Sleeve 1936-663 2338 43556-36 Thrust Bearing Sleeve 1941-664 13581 43560-35 Wheel Adjusting Shims 1941-66 10 pk5 646 43566-35 Chrome Star Wheel Cover 1937-666 2512 43564-35 Wheel Hub Dust Shield 1936-667 2340 Wheel Gasket Kit 1941-668 1166 Chrome Star Wheel Screws for wheel

1936-66 1719 Chrome Star Wheel Acorn Screws &

Nuts for 1 wheel 1936-669 2513 9220 Right Rollers STD. Set of 12 2514 9221 Right Rollers +.0002 Set of 12 2515 9222 Right Rollers +.0004 Set of 12 2516 9223 Right Rollers +.0006 Set of 12 2517 9224 Right Rollers +.0008 Set of 12 2518 9225 Right Rollers +.001 Set of 12

74 Wheel Hub & Parts 1936-6610 10729 24721-30 Right Side Roller Retainer 1941-6611 3300 43574-35 Inner Wheel Hub Cover 1936-6612 3301 43563-35 Thrust Washer 1941-6613 3302 43558-39 Brake Side Washer 1936-66 (5 pk)14 3303 43552-39 Wheel Spacer 1936-6615 11087 43554-35 Wheel Thrust washer lock ring 1937-66 (10 pack)16 2346 43561-39 Bearing Collar17 10732 43578-35 Brake Side Roller Retainer 1941-6618 2519 9220 Left Rollers STD Set of 14 2520 9221 Left Rollers +.0002 Set of 14 2521 9222 Left Rollers +.0004 Set of 14 2522 9223 Left Rollers +.0006 Set of 14 2523 9224 Left Rollers +.0008 Set of 14 2524 9225 Left Rollers +.001 Set of 1419 10511 9851 Grease Fitting (10 pk)

1936-66 Wire WheelsStar Hub Parts

Star Hub Wheel Assembly 1936-66Wheel fits front and rear BT 1936-66. Stock replica wheel hub comes with loose type roller bearings and replaces 43540-36. Comes with chrome or stainless steel spokes.Chrome S.S. Diam./Width Description70755 70756 16” x 3.00” Chrome hub and rim 70757 70758 16” x 3.00” Black hub, chrome rim 70759 16” x 3.00” Black hub and black rim70778 70779 18” x 2.15” Chrome hub and rim 70781 18” x 2.15” Black hub, chrome rim 70789 18” x 2.15” Black hub and rim

Rear Axle Adjuster Kit BT 1930-3672069 With cad bolts (5 pc)

BT Springer Front Axle Kit 1936-4843322 Chrome43323 Parkerized


1936-66 Wire Wheels

Front Wheel Stabilizer Collar Stud KitReproduction of OEM 44350-30 studs, nuts, and lockwashers used on 1930-52 45 Solo and 1932-40 Servi-Car.72599

Black Steel Rims Replica black powder coat rim with conventional bead construc-tion. Measures 18" x 3.15" and 2.0" bead width. Fits front or rear BT and rear only 45's. Fits rear WL 1930-52 and VL 1930-36. Fits front or rear EL 1936-40, UL 1938-47 and FL 1941-44.70766

Wheel Lug Bolts for Brake DrumsPCP OEM Description19226 43530-35A Black BT 1936-7219227 43530-35A As above, chromed19239 43531-35 Chrome BT oversize72466 4026-35S Parkerized 1938-72, 7/16-20

18" Steel Wheel RimPCP OEM Description70736 43002-30B 45 Front, black70737 43003-30C 45 Front, chrome70738 43004-30B All rear, black

16" OEM Factory Style Drop Center Rims "A"16" Original drop centre rim design with deep indent for safety beads. Chrome rims have 40 spoke holes. PCP Width Finish Description 6280 3.0 Chrome As OEM w/large hole70735 3.0 Black powdercoat As OEM w/large hole70752 3.0 Chrome As OEM w/small hole70753 4.0 Chrome As OEM w/large hole

Chrome 16” Rear Wheel Cover Set221mm inner diameter to accept brake drum. Right hand spacer must be ground or turned down to fit into cover. Includes cover set, 4 screws and 4 nuts. Fits EL 37-53 and FL 41-57.19843

Chrome 16” Front Wheel Cover Set194mm inner diameter to accept brake drum. Includes cover set, 4 screws and 4 nuts. Fits spring fork 16”star hub wheel with brake drum. Fits EL 36-40, UL 37-48, FL 41-48 and G 41-5719865


45 Front Axle and Brake Hardware 1930-52PCP OEM Description19012 7811 Axle nuts, chrome19013 As above, cadmium15700 8860 Balls (50 pk)10511 9851 Grease fitting (10 pk)10513 9852 90 degree grease fitting (5 pk)16247 9968 Early frame mount cable clamp16521 9974 Lower cable to fork clamp 16204 9980 Front brake cable clamp 11109 43630-30 Retaining ring (5 pk)16587 43632-44 Cone seal 45 front wheel (5 pk)16588 43635-30 Lockwasher 45 front wheel16589 Cone nut for sleeve 45 front wheel 30-5216590 43640-30 Left inner dirt guard 19028 43871-30 Axle9302 43633-44 Nut and oil seal w/retainer, chrome9303 As above, cadmium9743 As above, parkerized19458 44145-41 Backing plate 1941-52 18630 44180-30 Backing plate bushing19125 44223-28 Springer fork brake bushing (pr) 19123 44226-36 Stud, lock tab, nut 44229-40 44231-3819364 44226-36 Stud only2321 Shackle rebuild kit

PCP OEM Description19460 44265-31 Brake cam12006 44270-36 Brake cam washer 1936-4819205 44307-31 Front brake operating arm 41-52 45” 19210 45 Front brake plate cover kit19461 44350-30 45 Front wheel cover plate stud (pr)19339 44405-31 Shoe set 44406-3119332 44427-35 Brake lining only19462 44450-35 Brake shoe pivot stud72441 44450-35 Brake stud kit (parkerized) 1935-5119463 44476-35 Locking plate13217 44486-28 Spring set50208 45002-41C As above, chrome 19033 45085-30 Brake cable Springer 1931-4819456 Brake cable outer 1928-40 19190 Brake cable inner/outer kit 1930-5719457 45153-28 Inner cable only 1928-488624 45162-41 Cable adjuster 1941-579739 As above, chrome9630 As above, parkerized19464 Cable adjuster 1928-40 cadmium9683 As above, parkerized9740 As above, chrome16248 45172-28 Lower cable clamp, black19034 45177-29B Cable connector clamp

45 Springer Front Brake


BT Springer Front Brake

Brake Cable Assembly 45” and BT 1930-5719190 (45085-30)

Big Twin Spring Fork Brake Parts 1936-48PCP OEM Description10131 490 Pin (5 pk)20518 6590 Washer (10 pk)5198 Cad nut kit (4 pcs)20104 7923 Chrome nut20105 As above, cad 16247 9968 Cable to fork top clamp16204 9980 Front brake cable clamp13511 41691-31 Copper cam shim (5 pack)19044 43872-36 Black front axle kit3675 43872-36 Chrome front axle19000 43882-36 Front axle sleeve19001 43884-36 Chrome spacer19192 As above, parkerized 554 43886-30 Chrome nut kit (3 pc)19802 44113-36 Black brake drum19803 44113-36C As above, chrome19455 44146-41 Black backing plate19224 As above, chrome18638 44180-36 Bushing for back plate BT5287 44183-36 Grease seal kit 4694 44475-35 Lock plate19121 44210-40 Black shackle bar BT 1940-4819122 As above, chrome2321 Shackle rebuild kit19125 44223-28 Shackle bushing (pr)19364 44226-36 Stud only from above

PCP OEM Description19223 44265-36 Brake cam BT12006 44270-36 Shaft washer19032 44308-36 Operating arm BT 36-48, parkerized19399 As above, chrome19340 44402-36 Shoe set complete BT3970 44433-39 Linings only BT19222 44449-36 Stud and lock plate13216 44484-35 Shoe springs (pr)50208 45002-41C As above, chrome19033 45085-30 Brake cable 1931-48 pvc19456 Brake cable outer 1928-40 19190 Brake cable inner/outer kit19556 45102-39 Oil cup kit, zinc19457 45153-28 Inner cable only 1928-488624 45162-41 Cable adjuster 1941-579739 As above, chrome9630 As above, parkerized19464 Cable adjuster 1928-40 cadmium9683 As above, parkerized9740 As above, chrome19034 45177-29B Lower cable clamp16248 45172-28 As above, chrome90102 Chrome BT brake kit 90103 As above, black

Black brake Shackle BarOriginal style construction with factory numbers. Use correct brake arm shoulder bolts for 1936-40. Includes installed grease fittings and bushings. Fits EL & UL 36-40.19727


Brake Drum

45 Rear Brake PartsFor 1941-52 Solo models.PCP OEM Description19511 4054-35 Rear cam82065 4065-35 Parkerized, rear rod 19832 41401-41 Black complete drum19833 As above, chrome2352 41474-35 Sprocket kit with ring19510 41652-37 Black backing plate 13583 41692-36 Brake cam shim 19335 41806-41 Complete shoe set3968 41849-41 Linings, pair10912 41876-41 Pivot stud19513 41925-41 Rear arm19514 As above, chrome19515 42330-39 Parkerized front rod 19512 42566-35 Black bell crank19463 44476-35 Lock plate13217 44486-28 Spring set72326 Parkerized Brake arm anchor stud kit 1935-52

Solo Rear Black Backing Plate Assembly 41-52Includes completely assembled backing plate, arm, shoes, springs, speedometer drive and cam.19861

Mechanical Brake RodsChr. Parker. Application216 19516 Front 74 & 80 1937-57 (42326-37)218 82067 Rear 74 & 80 1936-57 (42257-36)19527 19515 Front 45 Solo 1939-52 (4073-39)82066 82065 Rear 45 Solo 1935-52 (4065-35)

Clevis217 19525 Front all models short (42333-30)219 19526 Rear all models long (42273-30)10105 10108 Pin (42269-30) (5 pk)

Mechanical Backing Plate Kit BT 1936-57Includes plate, springs, shoes, cam pivot stud and plate. Arm not included.PCP Finish74013 Chrome74018 Black

74018

Foot Brake Lever Stud Fits BT Knuckle 1936-38 72315 Stock72309 O/S to 23/32 (needs reaming)

Foot Brake Lever StudFits BT 1937-57 and 45 1939-73.72316 Stock72310 O/S to 23/32 (needs reaming)

Colony Rear Brake Shoe Pivot Stud & CupParkerized reproduction of original Harley fasteners used on 1938-57 BT.72720

45 Rear Brake DrumUnit includes drum with sprocket and splash ring riveted on. Re-places 41401-41, on 1941-52 solo.19832 Black drum19833 Chromed drum2352 Sprocket only 41T5519 Sprocket rivets only WL 35-52

72310


Rear Axle Nut and Lock KitQuality reproduction rear axle kit contains sleeve nut, collar, axle nut, and lockwash-er. Fits 1936-52 45 Solo.19008 Chrome Plated19009 Cad Plated

Front Axle Nut KitMachined axle nuts just like Harley did it. Kit contains 2 axle nuts and 2 cotter pins for the following:19010 1926-34 Singles,chrome 1929-36 45 Solo, chrome19011 1926-34 Singles, cad 1929-36 45 Solo, cad19012 1937-52 45 Solo, chrome19013 1937-52 45 Solo, cad

Servi-Car Rear SprocketReplaces OEM 82860-32. Use on all 1932-73 Servi-Car. 37 Tooth type.3763

Brake Hardware

Rear Chain AdjustersAdjusters are heat treated, plated and sold in pairs with plated lock nuts assembled to insure properly fitting threads.PCP Description5165 Cad BT 1936-721796 Chrome BT 1936-721632 Chrome Solo 45” 1930-525246 Cad Solo 45” 1930-52

HD 45 Servi Car Wheel Brake CylinderPC # OEM # Fits2330 33460-51 1951-on

Servi-Car Master CylinderStock replacement master cylinders. Complete and ready to install. Harley 45” Servi-Car 1951-73.3971 Complete kit (83500-51)

Mechanical Brake Kit 1936-57For use on mechanical brake frames with a cross shaft tube only. Can be used for restoration or for forward controls on a rigid frame.PCP Finish19844 Chrome19845 Parkerized

Colony Rear Brake Rod Clevis Pin KitParkerized reproduction of OEM 41692-36 wave washers and other fasteners to mount rear brake rods. Fits 1935-52 45’s.72502 Kit72537 Pins only (5 pack)

Front Brake Control Wire Lower Connection KitParkerized lower connection assembly used on 1928-50 45’s and 1928-48 Big Twins.72593

3971

2230

19844


Dual Cam Brake AssemblyIncludes shoes, springs, and arm assembly to fit stock spring fork brake drum. Fits EL 36-40, UL 47-48 & FL 41-48.Black Chrome19731 19717

Brake Hardware

Wheel Bearing KitFor use with front wheel hubs.19733 WR 47-5219060 G 36-40, W 36-52

Front Brake Shoe KitKit includes formed steel riveted shoe set, washer, springs, cam, arm, lockplate, nut, pivot pin, adjuster and cam shim.19732 BT style fork with offset rockers and stepped axle on G 41-57, EL 36-48, U 36-48 & FL 41-4819657 Rear W 41-52

Spring Fork Front Brake KitKit includes: cable, cable end, shackle adjuster, backing plate, brake shoes, springs, drum, lug arm, cam, pivot stud and grease seal. Available in black and chrome finish. Brake handle and axle kit must be ordered separately. Fits 1936-47 spring forks with offset BT rockers and a star hub wheel. Order hub and handle separately.PCP Description90102 Chrome kit90103 Black kit43322 Axle kitEarly Left Side Levers50208 Chrome (45002-41C)

Brake Backing Plate KitIncludes black dual cam, finned brake drum, backing plate and anchor arm. Other parts are parkerized. Fits EL 36-40, UL 36-48 & FL 41-48.90260

Brake Backing Plate KitIncludes black finned brake drum, backing plate and stay bar. Other parts are parkerized. Fits EL & UL 38-48.90259

Finned Brake DrumOE style cast iron construction. Fits EL 36-48 & FL 41-48.19744 Chrome19745 Black

1974519744

90102

19732 19657

19717


Brake Shoes

Brake Linings with RivetsPCP OEM Width Application2047 41848-38 1.5” Rear BT 1938-57, 6 hole3970 44433-39 1” Front BT Springer type forks, 5 hole 19332 44427-35 1” Front 45” 1935-52, 6 hole3968 41849-41 1-3/8” Rear 45” Solo 1941-46, 7 hole19333 83355-51 2” Rear Servi car 1951-73, 10 hole

Brake Shoe Springs Front (pair)PCP OEM Application13216 44484-35 Springer 74 & 80 36-57, FL Glide 1948-6813217 44486-28 45” Solo 1929-52Rear (pair)PCP OEM Application13205 41835-30 74 & 80 Mechnical 1936-5713217 44486-28 45” Solo 1935-5213239 88375-51 Servi -Car 1951-73 88373-5113216 44484-35 Servi-Car 1938-48

Brake Shoe SetsSets are complete with linings installed and are sold in pairs.Rear, MechanicalPCP OEM Application240 41805-38 Rigid 74” 1938-5719334* 41805-33 Rigid 74” 1938-5719335 41806-41 45” Solo 1941-52

Rear, HydraulicPCP OEM Application19336 83350-51 Servi-G 1951-73

Front, SpringerPCP OEM Application19339* 44405-35 45” Solo 1931-5219340 44402-36 61, 71, 80” FL 41-48, EL 37-52, UL 37-48, Servi-G 37-57*Note: OEM cast construction

Springer front Brake Shoes 1931-5219339

3968

19336

19333

240

Cable Oiler Kit 19556 1939-48 (45102-39)

Front Vinyl Brake Coil 1931-4819535 4143-30C (each)

Brake Coil Ferrule 1931-4819537

Springer Front Brake Cable Adjuster Cad plated duplicate of original Harley part. One or two locknuts included depending on applica-tion.8624 BT 41-48, Servi-Car 41-578818 BT 50-71, XL 52-72, FX 71-72277 Chrome, BT 50-71, XL 52-72, FX 71-72

Brake Coupling & OilerCad plated solid brass coupling is an exact reproduction of the original Harley design and includes the dust cover. Coupling OEM# 4142-30. Fits all models H.D. 1930-38.9004

19340

Section 20A ANTIQUE 1929-on 45-S/V-UL-K-Model

Documents

Transcript of Section 20A ANTIQUE 1929-on 45-S/V-UL-K-Model