Prices EURO

130
www.mobimex.ch Retail prices in Euro not including value-added tax from 01 | 2021 Prices EURO

Transcript of Prices EURO

www.mobimex.ch

Retail prices in Euro not including value-added taxfrom 01 | 2021

Prices EURO

Akzentfarben | Accent colours

Akzentfarben | Accent colours

Farbenvielfalt | Variety of colours

Pulverfarben | Powder colors

Style 22 4201E13212A3F

Style 23 4201E76256A3F

Trend 84201A90160A10

Classic 384201E82306A3F

Style 284201E76257A3F

5168

30jadejade

nachtblaunight blue

stahlblausteel blue

40 4347tomatenrottomato red

weinrotwine red

brombeereblackberry

35indisch gelbindian yellow

53 70salbeisage

altrosadusky rose

Basisfarben | Basic colours

01 02 03 04

27 5854schneeweisssnow white

grau-weissgrey white

vanillevanilla

elfenbeinivory

39rosenholzrosewood

28 59 kieselstein

pebble

60steingrau

stone grey

44zementcement

66granitgranite

37schieferschwarz

slate black

46schwarz

black

49kakaocacao

58schwarz tiefmattblack deep matt

Strukturlackmetallic, sand

Textured metallic paint, sand

not standard for HUE

Strukturlackmetallic, silber

Textured metallicpaint, silver

not standard for HUE

Strukturlackmetallic, anthrazitTextured metallicpaint, anthracite

not standard for HUE

Strukturlackmetallic, rost

Textured metallicpaint, rust

not standard for HUE

Alle abgebildetenFarben/Strukturen nicht bindend

All printed colours/structures cannot be regarded as binding

Farbauswahl zeitlich vorbehaltenColor selection: subject to change without notice

Leder (WEDA) | Leather (WEDA)

Stoff (WEDA) | Fabric (WEDA)

ASCOT

Offwhite 2110Pearl 2180Aubergine 2480Blue 2580Granite 2760Mole 2780Hazelnut 2845

REVIVE 1 (Kvadrat), alle Farben | all colorsHERO (Kvadrat), alle Farben | all colors

Andere Stoffe auf Anfrage.Other fabrics on request.

Andere Farben aus den Kollektionen Ascot und Linea auf Anfrage. Other colors from the collections Ascot and Linea on request.

LINEA

Marrone 608Mogano 610Testa Moro 611Nero 622Grigio 623Burgundy 625Grey 626

Brandy 2850Brasil 2855Redbrown 2860Mocca 2880Black 2900

Stone 629Latte 635Asfalto 660

Materialien | Materials

FENIX NTM

Naturstein (Standardsortiment) | Natural stone (Standard range)

Smeralda Spluga Basaltina Marmor Carrara Nero Marquina Emperador Dark

FENIX NTM Castoro Ottawa

0717

FENIX NTMBeige Luxor

0719

FENIX NTMNero Ingo

0720

FENIX NTMWeiss Bianco Malé

0029

FENIX NTMGrigio Antrim

0752

FENIX NTMCacao Orinoco

0749

Alle abgebildetenFarben/Strukturen nicht bindend

All printed colours/structures cannot be regarded as binding

Farbauswahl zeitlich vorbehaltenColor selection: subject to change without notice

Leder (WEDA) | Leather (WEDA)

Stoff (WEDA) | Fabric (WEDA)

ASCOT

Offwhite 2110Pearl 2180Aubergine 2480Blue 2580Granite 2760Mole 2780Hazelnut 2845

REVIVE 1 (Kvadrat), alle Farben | all colorsHERO (Kvadrat), alle Farben | all colors

Andere Stoffe auf Anfrage.Other fabrics on request.

Andere Farben aus den Kollektionen Ascot und Linea auf Anfrage. Other colors from the collections Ascot and Linea on request.

LINEA

Marrone 608Mogano 610Testa Moro 611Nero 622Grigio 623Burgundy 625Grey 626

Brandy 2850Brasil 2855Redbrown 2860Mocca 2880Black 2900

Stone 629Latte 635Asfalto 660

Materialien | Materials

FENIX NTM

Naturstein (Standardsortiment) | Natural stone (Standard range)

Smeralda Spluga Basaltina Marmor Carrara Nero Marquina Emperador Dark

FENIX NTM Castoro Ottawa

0717

FENIX NTMBeige Luxor

0719

FENIX NTMNero Ingo

0720

FENIX NTMWeiss Bianco Malé

0029

FENIX NTMGrigio Antrim

0752

FENIX NTMCacao Orinoco

0749

Zoom

NE

TTI

2LIN

BRACE

GEORGE

HUE

WEDA

LYNX

Gen

eral

in

form

atio

n

Zoom

NE

TTI

2LIN

BRACE

GEORGE

HUE

WEDA

LYNX

Gen

eral

in

form

atio

n

04 - 06

07 - 09

10

10 - 11

11

12 - 13

14 - 15

16 - 17

Gen

eral

in

form

atio

n

Selection of wood

Surface finishes

Origin solid wood

Natural stone, Leather, Metal

Overview of edge profiles

Manufacture of non-standard sizes

Planning support

Conditions of business

04 - 06

07 - 09

10

10 - 11

11

12 - 13

14 - 15

16 - 17

Gen

eral

in

form

atio

n

Selection of wood

Surface finishes

Origin solid wood

Natural stone, Leather, Metal

Overview of edge profiles

Manufacture of non-standard sizes

Planning support

Conditions of business

4

The table tops are available in two different assortments: Selection and Naturart.

Here one finds only the most beautiful woods and craftsmanship of the highest quality. However each tree is unique and formed by Nature. Therefore the colours and structure of each piece of furniture will vary. A solid wood piece of furniture shows the character and the history of a 50-200 year old mature tree. Small knots, accretions and fine crack markings caused by the wind, are natural traits and are inherent to genuine solid wood. Solid wood lives and reacts differently to changing environments (for eg, a hot period, a humid summer, different climate zones). A slight unevenness in the surface, as well as the solid wood top are normal. The optimal room humidity for solid wood furniture should be a constant 55% (approx) throughout the year.

BV 28 | Tops - thickness 28 mmOne tree, one table. For each BV 28 solid wood top, the craftsman chooses the best tree and with the resulting different wood widths consructs a table that keeps the unique natural growth characteristics.

BV 40 | Tops - thickness 40 mmOne tree, one table. Crafted as the BV 28 table top, the strength of the finished table top is however 40 mm. This thicker top shows its natural, lasting robustness.

Electrical equipment, which generates heat, such as computers, lamp transformers, etc., must not be placed directly on solid wood furniture. The heat excessively dries out the wood at the contact area which can cause cracking. An Alucobond underlay is recommended.The under side of the table differs from the top surface, since individual boards are positi-oned so that any knots or less desirable grain effects are concealed. Knots and cracks can be drilled out and replaced by a glued-in wood plug.

This is the show piece for the artistic conversion of the beauty of a wild-growing tree into an impressive table top. Through the formation of the knots, growth rings, wind cracks and ageing, Mother Nature produces an individual work of art. Naturart is not a standardised product, therefore the delivery time is determined by finding just the right tree for the perfect furniture piece. Through high quality craftmanship, the mature tree can be crafted into a particular design, with the result that the piece of furniture is, so to speak, a surprise in its individualility. Not every wood type is possible in Naturart. An ordered piece of furniture in Naturart can NOT be cancelled or returned. The workmanship is of course ZOOM quality.

Cracks and Knots: when not otherwise specified, these are black filled and sealed.Surface: when not otherwise specified, it is natural oiled. Alternative finishes are possible.

Naturart 40 mmOne tree - one table. The table top strength is approx. 40 mm. Individual boards are mostly wider than those of BV40.

Every tree is an individual product of nature. Consequently colour and structure may vary from one piece of furniture to the next. Basically, surfaces receive a clear natural finish, though slight colour corrections may be made by bleaching or staining. Natural light causes wood to change its colour. Tables with wood inserts or extensions may, over time, show differences in colour.

!

Selection

Naturart

Colour and Structure

General information

Selection of wood

Solid wood

5

Wood grain

Steamed beech

Beech naturart(red heartwood beech)

Oak naturart

Smoked oak

Tables without extensions (top as one piece) normally have the wood grain running lengthwise. Depending on the table length and wood type, the table may be longitu-dinally jointed. Pull out extensions of the tables run crosswise. With add on extension tops, by models TIX and MAISA, the wood grain always runs crosswise to the head table.

MapleMaple is a light-coloured wood that is additionally bleached by Zoom by Mobimex and treated with a special light stabiliser lacquer coating.

PearThe Pear tree is short therefore table tops over 180 cm long are normally longitudinally jointed. The Pear wood is steamed. Since individual trees can exhibit marked diffe-rences in colour, the wood is sometimes lightly stained, though every effort is made to retain its natural shade. We recommend a natural lacquer for the surface.

BeechZoom by Mobimex uses specially selected, light-coloured beechwood that has not been steam-treated. After a time, the effect of natural light gives the originally light co-loured wood a warm reddish shade. Beech is not recommended for dark finishes, for eg: stained black or black lacquered finish.

Steaming gives beechwood a strong reddish-brown colour. Price as for Maple.

Beech Naturart gains its vigour from the play of colours between the lighter sapwood and the reddish-brown heartwood. Accretions and knots give the table top additional expressive power.

OakOak has a century-old tradition in furniture making, it is extremely hard and durable. The colour scale ranges from yellowish-brown to mid-brown.

Striking accretions, discolourations and cracking, gives Oak Naturart an individual, primeval expressive force. Cracks are normally black filled and sealed.

The Oak wood is put through a special process and artificially darkened. The colour can not be influenced, therefore colour differences within the top are possible. Models in Naturart are NOT possible. Price same as for Walnut.

Types of wood

4

The table tops are available in two different assortments: Selection and Naturart.

Here one finds only the most beautiful woods and craftsmanship of the highest quality. However each tree is unique and formed by Nature. Therefore the colours and structure of each piece of furniture will vary. A solid wood piece of furniture shows the character and the history of a 50-200 year old mature tree. Small knots, accretions and fine crack markings caused by the wind, are natural traits and are inherent to genuine solid wood. Solid wood lives and reacts differently to changing environments (for eg, a hot period, a humid summer, different climate zones). A slight unevenness in the surface, as well as the solid wood top are normal. The optimal room humidity for solid wood furniture should be a constant 55% (approx) throughout the year.

BV 28 | Tops - thickness 28 mmOne tree, one table. For each BV 28 solid wood top, the craftsman chooses the best tree and with the resulting different wood widths consructs a table that keeps the unique natural growth characteristics.

BV 40 | Tops - thickness 40 mmOne tree, one table. Crafted as the BV 28 table top, the strength of the finished table top is however 40 mm. This thicker top shows its natural, lasting robustness.

Electrical equipment, which generates heat, such as computers, lamp transformers, etc., must not be placed directly on solid wood furniture. The heat excessively dries out the wood at the contact area which can cause cracking. An Alucobond underlay is recommended.The under side of the table differs from the top surface, since individual boards are positi-oned so that any knots or less desirable grain effects are concealed. Knots and cracks can be drilled out and replaced by a glued-in wood plug.

This is the show piece for the artistic conversion of the beauty of a wild-growing tree into an impressive table top. Through the formation of the knots, growth rings, wind cracks and ageing, Mother Nature produces an individual work of art. Naturart is not a standardised product, therefore the delivery time is determined by finding just the right tree for the perfect furniture piece. Through high quality craftmanship, the mature tree can be crafted into a particular design, with the result that the piece of furniture is, so to speak, a surprise in its individualility. Not every wood type is possible in Naturart. An ordered piece of furniture in Naturart can NOT be cancelled or returned. The workmanship is of course ZOOM quality.

Cracks and Knots: when not otherwise specified, these are black filled and sealed.Surface: when not otherwise specified, it is natural oiled. Alternative finishes are possible.

Naturart 40 mmOne tree - one table. The table top strength is approx. 40 mm. Individual boards are mostly wider than those of BV40.

Every tree is an individual product of nature. Consequently colour and structure may vary from one piece of furniture to the next. Basically, surfaces receive a clear natural finish, though slight colour corrections may be made by bleaching or staining. Natural light causes wood to change its colour. Tables with wood inserts or extensions may, over time, show differences in colour.

!

Selection

Naturart

Colour and Structure

General information

Selection of wood

Solid wood

5

Wood grain

Steamed beech

Beech naturart(red heartwood beech)

Oak naturart

Smoked oak

Tables without extensions (top as one piece) normally have the wood grain running lengthwise. Depending on the table length and wood type, the table may be longitu-dinally jointed. Pull out extensions of the tables run crosswise. With add on extension tops, by models TIX and MAISA, the wood grain always runs crosswise to the head table.

MapleMaple is a light-coloured wood that is additionally bleached by Zoom by Mobimex and treated with a special light stabiliser lacquer coating.

PearThe Pear tree is short therefore table tops over 180 cm long are normally longitudinally jointed. The Pear wood is steamed. Since individual trees can exhibit marked diffe-rences in colour, the wood is sometimes lightly stained, though every effort is made to retain its natural shade. We recommend a natural lacquer for the surface.

BeechZoom by Mobimex uses specially selected, light-coloured beechwood that has not been steam-treated. After a time, the effect of natural light gives the originally light co-loured wood a warm reddish shade. Beech is not recommended for dark finishes, for eg: stained black or black lacquered finish.

Steaming gives beechwood a strong reddish-brown colour. Price as for Maple.

Beech Naturart gains its vigour from the play of colours between the lighter sapwood and the reddish-brown heartwood. Accretions and knots give the table top additional expressive power.

OakOak has a century-old tradition in furniture making, it is extremely hard and durable. The colour scale ranges from yellowish-brown to mid-brown.

Striking accretions, discolourations and cracking, gives Oak Naturart an individual, primeval expressive force. Cracks are normally black filled and sealed.

The Oak wood is put through a special process and artificially darkened. The colour can not be influenced, therefore colour differences within the top are possible. Models in Naturart are NOT possible. Price same as for Walnut.

Types of wood

6

!

Ash

American cherry

Walnut naturart

Black WalnutAmerican Walnut

Sycamore naturart

Elm naturart

Heartwood ashAt Zoom by Mobimex, Hardwood Ash is bleached and treated with a special light stabi-liser as standard. This minimises the distinct transition between the brown heart and the “white” sapwood which is a customary feature of Hardwood Ash. (If bleaching is not requi-red please inform us with your order.) Ideal for open-pore coloured lacquers.

If a table top without brown heartwood is requested, please note on the order form, ash without brown heartwood.“ Price same as for Maple.

ChestnutChestnut is a yellowish-brown to dark brown wood with a structure very similar to Oak. Price same as for Cherry.

CherryEuropean Cherry is reddish-yellow wood, fine fibred, delicate and shiny. The colour and tex-ture become even more attractive as the wood ages.

Small knots, accretions and fine crack markings caused by the wind are natural traits and are inherent to genuine solid wood. Its price is the same as for Black Walnut with sapwood.

WalnutZoom by Mobimex processes European (French) Walnut, which has a recognizable bold structure and colour. Lengths over 240 cm (without longitudinal jointing) must be requested.

Walnut trees, that represent a wild „Naturart“ piece, are genuine rarities. Lengths over 280 cm must be requested.

Black Walnut is an American Walnut grown in Europe. Its colour is chocolate to pur-plish-brown. The light sapwood is a distinctive feature of both woods. It stands out from the darker heartood. If the light sapwood is not wanted, it must be clearly stated on the order. Black Walnut without sapwood is priced the same as European Walnut. In comparison to the European Walnut, the Black Walnut is considerably darker, more homo-geneous and less busy.

SycamoreZoom Mobimex has newly rediscovered the Sycamore tree as a solid wood furniture type. The wood is steamed, which brings out its warm, reddish colour. Alternating patterns of lighter and darker shades plus an appeasing, strongly linear grain make this wood unique and unmistakable.

Striking wood grain, with knots and accretions throughout.

ElmThe Elm Heartwood has a brown to slightly reddish colour and may have „green veins“ running through it. The growth rings are a prominent visual feature. The sapwood is consid-erably paler, and it is this contrast that gives the wood its strong textured effect.

Elm Naturart has bold growth patterns, strong colour differences, slight discolourations and often large knots and cracks.

Other woodsBirch, Larch, Chequer, Robinia, Noce (Italian Walnut), Alder, Yew and tropical woods such as Teak, Mahogany, Wengé, Zebrano, Bubinga, Macasser and others can also be used. Details supplied on request.

Solid wood Types of wood

7

Surface finishes

Surface finish

Care

Advantages

Staincolour as per sample

Care

Advantages

Care

The wood is protected by a surface finish. The decision on the advantages and disadvan-tages of a particular surface treatment is per individual piece and per the customer‘s wishes. There are practical considerations, such as the amount of effort and time needed for its care, but also more subjective factors such as a pleasant feel, the visual effect and its patina. It is important to consider these aspects before a decision is made.

Natural lacquered surfaceNormal treatment with a two-component lacquer produces a natural finish, though small colour corrections may be possible through staining or bleaching. This type of lacquer is relatively robust and provides a protective film from moisture (eg spilt drinks, grease,etc) and chemicals. Light causes wood to change its colour; it is important from first use, not to leave any objects (eg vases, blotters,etc) permanently in place on wood surfaces.

Lacquered surfaces do not require special care. The table can be wiped with a damp cloth and soap and water. Greasy marks can easily be removed using soapsuds. Furniture polish, etc, should not be used.

- top quality protection from soiling- very fine, smooth surface- very easy care- the lacquer is UV stabile, slowing the natural darkening of the wood - intensifies the colour and the structure of the wood

If desired, lacquered woods can be stained or lacquered according to a colour sample provided by the customer (not possible with oiled or soaped surfaces). It should be noted that even with careful treatment, slight variations in shade are unavoidable.

Surfaces lacquered, undressed wood effectThis surface enables the wood to keep its natural shade of colour but nevertheless gua-rantees full protection as with the natural lacquered version.

This surface does not require special care. The table can be wiped with a damp cloth and soap and water. Greasy marks can easily be removed using strong soapsuds. Furniture polish etc. should not be used.

- the wood retains its natural colour- top quality protection from soiling- very natural surface- very easy care- the lacquer is UV-stable, slowing the natural darkening of the wood

Oiled surfaceWood keeps its natural look with an oiled surface which preserves its specific character - asking to be touched or just simply admired. The oiled surface requires more care than the lacquered surface; it marks more easily, however the marks can be removed by light sanding and re-oiling.

With daily use, it is enough that the table top is wiped with a damp cloth. Spots from tea, coffee, wine, water, chocolate,etc, must be immediately wiped off with a damp cloth. Stubborn spots and scratches should be handled as per the below cleaning treatment instructions. The treated area will be brighter for a short time. To avoid such bright areas, the whole top must be treated as per the below instructions.

6

!

Ash

American cherry

Walnut naturart

Black WalnutAmerican Walnut

Sycamore naturart

Elm naturart

Heartwood ashAt Zoom by Mobimex, Hardwood Ash is bleached and treated with a special light stabi-liser as standard. This minimises the distinct transition between the brown heart and the “white” sapwood which is a customary feature of Hardwood Ash. (If bleaching is not requi-red please inform us with your order.) Ideal for open-pore coloured lacquers.

If a table top without brown heartwood is requested, please note on the order form, ash without brown heartwood.“ Price same as for Maple.

ChestnutChestnut is a yellowish-brown to dark brown wood with a structure very similar to Oak. Price same as for Cherry.

CherryEuropean Cherry is reddish-yellow wood, fine fibred, delicate and shiny. The colour and tex-ture become even more attractive as the wood ages.

Small knots, accretions and fine crack markings caused by the wind are natural traits and are inherent to genuine solid wood. Its price is the same as for Black Walnut with sapwood.

WalnutZoom by Mobimex processes European (French) Walnut, which has a recognizable bold structure and colour. Lengths over 240 cm (without longitudinal jointing) must be requested.

Walnut trees, that represent a wild „Naturart“ piece, are genuine rarities. Lengths over 280 cm must be requested.

Black Walnut is an American Walnut grown in Europe. Its colour is chocolate to pur-plish-brown. The light sapwood is a distinctive feature of both woods. It stands out from the darker heartood. If the light sapwood is not wanted, it must be clearly stated on the order. Black Walnut without sapwood is priced the same as European Walnut. In comparison to the European Walnut, the Black Walnut is considerably darker, more homo-geneous and less busy.

SycamoreZoom Mobimex has newly rediscovered the Sycamore tree as a solid wood furniture type. The wood is steamed, which brings out its warm, reddish colour. Alternating patterns of lighter and darker shades plus an appeasing, strongly linear grain make this wood unique and unmistakable.

Striking wood grain, with knots and accretions throughout.

ElmThe Elm Heartwood has a brown to slightly reddish colour and may have „green veins“ running through it. The growth rings are a prominent visual feature. The sapwood is consid-erably paler, and it is this contrast that gives the wood its strong textured effect.

Elm Naturart has bold growth patterns, strong colour differences, slight discolourations and often large knots and cracks.

Other woodsBirch, Larch, Chequer, Robinia, Noce (Italian Walnut), Alder, Yew and tropical woods such as Teak, Mahogany, Wengé, Zebrano, Bubinga, Macasser and others can also be used. Details supplied on request.

Solid wood Types of wood

7

Surface finishes

Surface finish

Care

Advantages

Staincolour as per sample

Care

Advantages

Care

The wood is protected by a surface finish. The decision on the advantages and disadvan-tages of a particular surface treatment is per individual piece and per the customer‘s wishes. There are practical considerations, such as the amount of effort and time needed for its care, but also more subjective factors such as a pleasant feel, the visual effect and its patina. It is important to consider these aspects before a decision is made.

Natural lacquered surfaceNormal treatment with a two-component lacquer produces a natural finish, though small colour corrections may be possible through staining or bleaching. This type of lacquer is relatively robust and provides a protective film from moisture (eg spilt drinks, grease,etc) and chemicals. Light causes wood to change its colour; it is important from first use, not to leave any objects (eg vases, blotters,etc) permanently in place on wood surfaces.

Lacquered surfaces do not require special care. The table can be wiped with a damp cloth and soap and water. Greasy marks can easily be removed using soapsuds. Furniture polish, etc, should not be used.

- top quality protection from soiling- very fine, smooth surface- very easy care- the lacquer is UV stabile, slowing the natural darkening of the wood - intensifies the colour and the structure of the wood

If desired, lacquered woods can be stained or lacquered according to a colour sample provided by the customer (not possible with oiled or soaped surfaces). It should be noted that even with careful treatment, slight variations in shade are unavoidable.

Surfaces lacquered, undressed wood effectThis surface enables the wood to keep its natural shade of colour but nevertheless gua-rantees full protection as with the natural lacquered version.

This surface does not require special care. The table can be wiped with a damp cloth and soap and water. Greasy marks can easily be removed using strong soapsuds. Furniture polish etc. should not be used.

- the wood retains its natural colour- top quality protection from soiling- very natural surface- very easy care- the lacquer is UV-stable, slowing the natural darkening of the wood

Oiled surfaceWood keeps its natural look with an oiled surface which preserves its specific character - asking to be touched or just simply admired. The oiled surface requires more care than the lacquered surface; it marks more easily, however the marks can be removed by light sanding and re-oiling.

With daily use, it is enough that the table top is wiped with a damp cloth. Spots from tea, coffee, wine, water, chocolate,etc, must be immediately wiped off with a damp cloth. Stubborn spots and scratches should be handled as per the below cleaning treatment instructions. The treated area will be brighter for a short time. To avoid such bright areas, the whole top must be treated as per the below instructions.

8

Surfaces finishes

Cleaning instructions & treatment

Advantages

Care

Cleaning instructions & treatment

Advantages

To remove spots and scatches and to protect and renew the surface over the long term (approx. 1-2 times in the year):

Cleaning/sanding1. Clean the table top with a damp cloth and leave it to dry2. Using the abrasive sponge, sand the table top gently, as evenly as possible and

always along the grain of the wood3. Dust the surface after sanding

Oiling (it is advisable to wear the gloves provided)4. Apply the oil to the top using the cotton cloths provided. In doing so - Never pour the oil onto the top - Oil the surfaces and edges evenly and quickly. Apply pressure when doing so.

Then rub the oil in the direction of the grain - Leave to dry for 10 minutes5. Rub dry using a second cotton cloth6. Wait 12 hours before using the table again

- natural, environmentally friendly surface- very pleasant touch, one feels the wood, a silky smooth surface - soiling and light damages of the wood can be looked after by the customer- intensifies the colour and the structure of the wood

Soaped surfaceThe soaped surface shows the natural colour of the wood. The soap and the care with water additionally lightens the wood. Through the treatment of the surface, the wood is better prepared to withstand water and humidity. The pores of the wood are filled with soap, which also hinders soiling. Of course, the wood treatment must be re-newed from time to time.

It is enough that the table top is wiped with a damp cloth and once in a while also using a lightly soaped cloth. Spots from tea, coffee, wine, water, chocolate etc, must be imme-diately wiped off with a damp cloth. Stubborn spots and scratches must be cleaned with a scotch sponge and liquid soap. Rub the soaped sponge in the direction of the wood grain. Clean the total table surface evenly, but lightly, and adding water as needed. The treated area will be brighter for a short time. To avoid such bright areas, the whole top must be treated as per the below instructions.

Place the white soapflakes with lukewarm water in a suitable vessel (plastic or glass)) that can be sealed. Stir until a creamy paste is obtained. See Care Set instructions. Any remai-ning paste can be kept for further use later.

Using the soap mixture, wipe the furniture with a sponge or enclosed soft cloth, which dries in approx. 15 min. Leave the surface to dry well.

The treatment should be done every 3 hours, being repeated once or twice whereby the Marseille Soap is absorbed into the pores of the wood. The furniture is therefore better to resist grease and spots of all types.

When first delivered the table surface is more sensitive to spots and requires more care. A soaped surface feels very pleasant and keeps the naturalness of the solid wood.

- the wood holds its natural surface and colour- very fine smooth surface- soiling and light damages of the wood can be looked after by the customer.

9

• ••• •• ••

Natural SurfaceBasically by all wood types possible. Care as per soaped surface.

Care Set (net price incl. postage)

1 bottle wood oil à 2,5 dl Care set for oiled surfaces 1 bag of soapflakes Care set for soaped surfaces

Recommended surfaces for the various types of wood(Zoom by Mobimex recommendation)

• •• •• •• •• • •

• • • •• •

• • • •• • • •

• • • • ••

• •• •• •• •

BeechBlack Walnut with sapwoodBlack Walnut without sapwoodCherryElm Heartwood ashHeartwood beechLight ashMapleOakPearSmoked oak SycamoreWalnutWengé

Version SELECTION

Type of wood natural oiled

light oiled

natural lacquered

stained and

lacquered

Undressed wood-effect

lacquer

Undressed wood-effect

lacquer

natural soaped

Elm Heartwood beech OakSycamoreWalnut

Version NATURART

Type of wood natural oiled

light oiled

natural lacquered

stained and

lacquered

natural soaped

Extra charge „light oiled“ or „stained and lacquered“, per table or furniture: EUR 255

EUR 28EUR 42EUR 28EUR 42

Retail in EURO excl. VAT

8

Surfaces finishes

Cleaning instructions & treatment

Advantages

Care

Cleaning instructions & treatment

Advantages

To remove spots and scatches and to protect and renew the surface over the long term (approx. 1-2 times in the year):

Cleaning/sanding1. Clean the table top with a damp cloth and leave it to dry2. Using the abrasive sponge, sand the table top gently, as evenly as possible and

always along the grain of the wood3. Dust the surface after sanding

Oiling (it is advisable to wear the gloves provided)4. Apply the oil to the top using the cotton cloths provided. In doing so - Never pour the oil onto the top - Oil the surfaces and edges evenly and quickly. Apply pressure when doing so.

Then rub the oil in the direction of the grain - Leave to dry for 10 minutes5. Rub dry using a second cotton cloth6. Wait 12 hours before using the table again

- natural, environmentally friendly surface- very pleasant touch, one feels the wood, a silky smooth surface - soiling and light damages of the wood can be looked after by the customer- intensifies the colour and the structure of the wood

Soaped surfaceThe soaped surface shows the natural colour of the wood. The soap and the care with water additionally lightens the wood. Through the treatment of the surface, the wood is better prepared to withstand water and humidity. The pores of the wood are filled with soap, which also hinders soiling. Of course, the wood treatment must be re-newed from time to time.

It is enough that the table top is wiped with a damp cloth and once in a while also using a lightly soaped cloth. Spots from tea, coffee, wine, water, chocolate etc, must be imme-diately wiped off with a damp cloth. Stubborn spots and scratches must be cleaned with a scotch sponge and liquid soap. Rub the soaped sponge in the direction of the wood grain. Clean the total table surface evenly, but lightly, and adding water as needed. The treated area will be brighter for a short time. To avoid such bright areas, the whole top must be treated as per the below instructions.

Place the white soapflakes with lukewarm water in a suitable vessel (plastic or glass)) that can be sealed. Stir until a creamy paste is obtained. See Care Set instructions. Any remai-ning paste can be kept for further use later.

Using the soap mixture, wipe the furniture with a sponge or enclosed soft cloth, which dries in approx. 15 min. Leave the surface to dry well.

The treatment should be done every 3 hours, being repeated once or twice whereby the Marseille Soap is absorbed into the pores of the wood. The furniture is therefore better to resist grease and spots of all types.

When first delivered the table surface is more sensitive to spots and requires more care. A soaped surface feels very pleasant and keeps the naturalness of the solid wood.

- the wood holds its natural surface and colour- very fine smooth surface- soiling and light damages of the wood can be looked after by the customer.

9

• ••• •• ••

Natural SurfaceBasically by all wood types possible. Care as per soaped surface.

Care Set (net price incl. postage)

1 bottle wood oil à 2,5 dl Care set for oiled surfaces 1 bag of soapflakes Care set for soaped surfaces

Recommended surfaces for the various types of wood(Zoom by Mobimex recommendation)

• •• •• •• •• • •

• • • •• •

• • • •• • • •

• • • • ••

• •• •• •• •

BeechBlack Walnut with sapwoodBlack Walnut without sapwoodCherryElm Heartwood ashHeartwood beechLight ashMapleOakPearSmoked oak SycamoreWalnutWengé

Version SELECTION

Type of wood natural oiled

light oiled

natural lacquered

stained and

lacquered

Undressed wood-effect

lacquer

Undressed wood-effect

lacquer

natural soaped

Elm Heartwood beech OakSycamoreWalnut

Version NATURART

Type of wood natural oiled

light oiled

natural lacquered

stained and

lacquered

natural soaped

Extra charge „light oiled“ or „stained and lacquered“, per table or furniture: EUR 255

EUR 28EUR 42EUR 28EUR 42

Retail in EURO excl. VAT

10

Zoom‘s very experienced timber purchaser is gathering the logs individually on the lumberyard. The selected logs are originally coming from sustainable leaded forestry management companies all over Europe. Well grown, slowly and careful dried, these valuable logs are the basic of the outstanding crafted Zoom furniture.

Place of origin

Ash | Fraxinus excelsior Austria, Croatia, France, Germany, Serbia, Switzerland Beech | Fagus sylvatica Croatia, Germany, Serbia, Switzerland Black walnut | Juglans nigra Croatia, France, Germany, Hungary, USA Cherry | Prunus avium Croatia, France, Germany, Rumania Elm | Ulmus minor Austria, Germany, Netherland, Skovakia, SwitzerlandEuropean walnut | Juglans regia Croatia, France, Hungary, Serbia, Slovakia, Slovenia Maple | Acer pseudoplatanus France, Germany, Slovakia, Slovenia, Switzerland Oak | Quercus robur Croatia, France, Germany, Hungary, Poland, Serbia, Switzerland Pear | Pyrus communis Austria, Belgium, Slovenia, Switzerland Sycamore | Platanus x acerifolia Croatia, France

Type of wood | botanical term Origin

General information

Surface

Care

Smeralda Spluga

Basaltina

Marmor Carrara

Nero Marquina

Emperador Dark

Natural stone Natural stone creates an accent in the selection and harmonises extremly well with the solid woods and with a large number of paint finishes from the standard programme.

As an option, surfaces can be satinised or polished (Basaltina: only satinised). The sati-nised surface is diamond-brushed and has a matt appearance; the polished surface has a high-gloss finish.

Surfaces are impregnated. To clean them and for subsequent care and protection, we recommend periodic re-impregnation. For this purpose we recommend the product „Triple effect“, manufactured by Akemi GmbH (www.akemi.de).

„Smeralda Spluga“ is a gneiss through which strongly expressive veins run. The basic colour is greenish. Inclusions of white quartz give the stone his brilliance. Smeralda Spluga is quarried in the province of Sondrio to the south of the Splugen valley (border between Switzerland and Italy), in one of the highest-altitude stone quarries in Europe.

Open-pore Therpit/vulcanite stone from Italy

Marble from Italy

Limestone from Spain

Limestone from Spain

Natural stone

11

K 15* K 18 K 25

K 34K 32 K 35

K 06

K 64*

K 43

K 45 K 53 K 60 K 63

K 71* K 75 K 79

Metal

Aluminium Solid material brushed and natural, black* or bronze* anodised.

Steel aluminium colouredThis material is particularly suitable for tables larger than 260 cm where the aluminium support may not provide enough stability (lateral vibration).

Untreated, oiled steel The large-area support plates and fronts have a grey-black iron surface with its cloudy colour effects and possibly some light scoring and scratch markings that further add to its character. After some years of use or if slight rusting has occurred, the supports can be cleaned and lightly re-oiled by the customer.

Aluminium

Steel aluminium coloured

Untreated, oiled steel

Eges

The overall apperarance of a piece of furniture is considerably influenced by the profiled edge. Therefore, Zoom offers a large assortment with very fine, lightly contoured, strongly drawn or rounded shapes.

* only possible with panels 28 mm thick

* black and bronze anaodised subject to extra charge

10

Zoom‘s very experienced timber purchaser is gathering the logs individually on the lumberyard. The selected logs are originally coming from sustainable leaded forestry management companies all over Europe. Well grown, slowly and careful dried, these valuable logs are the basic of the outstanding crafted Zoom furniture.

Place of origin

Ash | Fraxinus excelsior Austria, Croatia, France, Germany, Serbia, Switzerland Beech | Fagus sylvatica Croatia, Germany, Serbia, Switzerland Black walnut | Juglans nigra Croatia, France, Germany, Hungary, USA Cherry | Prunus avium Croatia, France, Germany, Rumania Elm | Ulmus minor Austria, Germany, Netherland, Skovakia, SwitzerlandEuropean walnut | Juglans regia Croatia, France, Hungary, Serbia, Slovakia, Slovenia Maple | Acer pseudoplatanus France, Germany, Slovakia, Slovenia, Switzerland Oak | Quercus robur Croatia, France, Germany, Hungary, Poland, Serbia, Switzerland Pear | Pyrus communis Austria, Belgium, Slovenia, Switzerland Sycamore | Platanus x acerifolia Croatia, France

Type of wood | botanical term Origin

General information

Surface

Care

Smeralda Spluga

Basaltina

Marmor Carrara

Nero Marquina

Emperador Dark

Natural stone Natural stone creates an accent in the selection and harmonises extremly well with the solid woods and with a large number of paint finishes from the standard programme.

As an option, surfaces can be satinised or polished (Basaltina: only satinised). The sati-nised surface is diamond-brushed and has a matt appearance; the polished surface has a high-gloss finish.

Surfaces are impregnated. To clean them and for subsequent care and protection, we recommend periodic re-impregnation. For this purpose we recommend the product „Triple effect“, manufactured by Akemi GmbH (www.akemi.de).

„Smeralda Spluga“ is a gneiss through which strongly expressive veins run. The basic colour is greenish. Inclusions of white quartz give the stone his brilliance. Smeralda Spluga is quarried in the province of Sondrio to the south of the Splugen valley (border between Switzerland and Italy), in one of the highest-altitude stone quarries in Europe.

Open-pore Therpit/vulcanite stone from Italy

Marble from Italy

Limestone from Spain

Limestone from Spain

Natural stone

11

K 15* K 18 K 25

K 34K 32 K 35

K 06

K 64*

K 43

K 45 K 53 K 60 K 63

K 71* K 75 K 79

Metal

Aluminium Solid material brushed and natural, black* or bronze* anodised.

Steel aluminium colouredThis material is particularly suitable for tables larger than 260 cm where the aluminium support may not provide enough stability (lateral vibration).

Untreated, oiled steel The large-area support plates and fronts have a grey-black iron surface with its cloudy colour effects and possibly some light scoring and scratch markings that further add to its character. After some years of use or if slight rusting has occurred, the supports can be cleaned and lightly re-oiled by the customer.

Aluminium

Steel aluminium coloured

Untreated, oiled steel

Eges

The overall apperarance of a piece of furniture is considerably influenced by the profiled edge. Therefore, Zoom offers a large assortment with very fine, lightly contoured, strongly drawn or rounded shapes.

* only possible with panels 28 mm thick

* black and bronze anaodised subject to extra charge

12

All the zoom furnitures are always custom made. They are individually manufactured and are in every requested side possible, from the small console to the 50 person conference table. Small differences can be calculated by referring to the surface difference areas. For a special project, please consult us. Mobimex will gladly provide the necessary planning support for such endeavors.

1. Calculate the total woods surface of the requested table (incl. wood inserts). Boat- shaped, elliptical and round tables are calculated as rectangular tables or squares.

2. Calculate the surface difference of the next largest standard table in the same shape and wood choice (the lenght of the table is the determining factor)

3. Calculate this up to a max. 1 m², multiply this surface difference with the m² surface difference price of the wood in question and add or subtract the amount from the chosen larger standard table.

4. Don‘t forget to include the extra charge(s) for a non-standard base type(s) or surface.

Manufacture of non-standard sizes

Custom made

Calculating non-standard sizes

TIXWA180TIXWA190TIXWA200TIXWA210TIXWA220TIXWA230TIXWA240TIXWA250TIXWA260

180 x 90 x 75190 x 90 x 75200 x 90 x 75210 x 90 x 75220 x 90 x 75230 x 90 x 75240 x 100 x 75250 x 100 x 75260 x 100 x 75

Surface difference per m² for non-standard sizes

1.621.711.801.891.982.072.402.502.60

Article L x W x H in cm Table area m² BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

Example of calculation

TIX table (rectangular)Dimension: 235 x 90 cmJointed solid wood, thickness of the table top: 40 mm I BV 40Type of wood: European walnut, natural lacquered Base: Aluminium brushed, natural anodised

Custom made L 235 x T 90 x H 75 cm = 2.12 m²TIXWA240 L 240 x T 100 x H 75 cm = 2.40 m² € 8’910Surface difference = -0.28 m² Price Walnut/m² € 1’825,- € 1’825,- x 0.28 m² € – 511

Final retail price (excl. VAT) € 8’399

Note: with a difference of over 1 m² (plus/minus), please request a price

3940 4340 4765 5270 61404100 4510 4970 5540 64854245 4685 5180 5805 68154410 4860 5390 6070 71404565 5055 5600 6340 74804725 5240 5815 6615 78305240 5850 6510 7495 89105415 6060 6760 7805 93105605 6265 7020 8130 97201040 1175 1400 1500 1825

13

Non-standard sizes

Table shapes and sizes

Approval photo

Non-standard heights are available, e.g. for club tables, higher chairs or especially high desks. The base frames re designed as standard for carpeting. If the floor is different, e.g. stone or parquet, please state this when ordering.

Since Zoom solid wood furniture is hand made to order, you have a free choice of shape and size, regardless of whether the table is to be 1 m or 10 m long. Zoom specialises in locating extra-long tree trunks so that tables can be made as long as necessary with the wood grain running along the table. However, possible transport problems must be taken into account. Depending on the type of wood and the situation where the table is to be installed, very large tables may have to be made in two or more sections.

At Mobimex, each table is created from a single tree trunk. The wood widths cut from it are skilfully placed together to form a table top. The craftsmanship needed for this is as complex as it is creative, and it has a significant impact on the character and the look of the table. You, as a Mobimex customer, have the opportunity to be involved in this crea-tive process and play a part in shaping the product. To enable you to do this, we will send you a photo of the table top assembled from the loose wood widths, if required.For assessment and modification, we provide you with the first photo proposal free of charge and the second photo option resulting from this process is also free. If a final decision is not made from the existing trunk/selection of wood widths a new trunk must be chosen and prepared. For this extra, very time-consuming step, we invoice an extra charge of EUR 160 net (purchase price), not including VAT. For a subsequent change of the type of wood, a flat-rate fee of EUR 270 net (purchase price), not including VAT, is always charged.

Retail in EURO excl. VAT

12

All the zoom furnitures are always custom made. They are individually manufactured and are in every requested side possible, from the small console to the 50 person conference table. Small differences can be calculated by referring to the surface difference areas. For a special project, please consult us. Mobimex will gladly provide the necessary planning support for such endeavors.

1. Calculate the total woods surface of the requested table (incl. wood inserts). Boat- shaped, elliptical and round tables are calculated as rectangular tables or squares.

2. Calculate the surface difference of the next largest standard table in the same shape and wood choice (the lenght of the table is the determining factor)

3. Calculate this up to a max. 1 m², multiply this surface difference with the m² surface difference price of the wood in question and add or subtract the amount from the chosen larger standard table.

4. Don‘t forget to include the extra charge(s) for a non-standard base type(s) or surface.

Manufacture of non-standard sizes

Custom made

Calculating non-standard sizes

TIXWA180TIXWA190TIXWA200TIXWA210TIXWA220TIXWA230TIXWA240TIXWA250TIXWA260

180 x 90 x 75190 x 90 x 75200 x 90 x 75210 x 90 x 75220 x 90 x 75230 x 90 x 75240 x 100 x 75250 x 100 x 75260 x 100 x 75

Surface difference per m² for non-standard sizes

1.621.711.801.891.982.072.402.502.60

Article L x W x H in cm Table area m² BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

Example of calculation

TIX table (rectangular)Dimension: 235 x 90 cmJointed solid wood, thickness of the table top: 40 mm I BV 40Type of wood: European walnut, natural lacquered Base: Aluminium brushed, natural anodised

Custom made L 235 x T 90 x H 75 cm = 2.12 m²TIXWA240 L 240 x T 100 x H 75 cm = 2.40 m² € 8’910Surface difference = -0.28 m² Price Walnut/m² € 1’825,- € 1’825,- x 0.28 m² € – 511

Final retail price (excl. VAT) € 8’399

Note: with a difference of over 1 m² (plus/minus), please request a price

3940 4340 4765 5270 61404100 4510 4970 5540 64854245 4685 5180 5805 68154410 4860 5390 6070 71404565 5055 5600 6340 74804725 5240 5815 6615 78305240 5850 6510 7495 89105415 6060 6760 7805 93105605 6265 7020 8130 97201040 1175 1400 1500 1825

13

Non-standard sizes

Table shapes and sizes

Approval photo

Non-standard heights are available, e.g. for club tables, higher chairs or especially high desks. The base frames re designed as standard for carpeting. If the floor is different, e.g. stone or parquet, please state this when ordering.

Since Zoom solid wood furniture is hand made to order, you have a free choice of shape and size, regardless of whether the table is to be 1 m or 10 m long. Zoom specialises in locating extra-long tree trunks so that tables can be made as long as necessary with the wood grain running along the table. However, possible transport problems must be taken into account. Depending on the type of wood and the situation where the table is to be installed, very large tables may have to be made in two or more sections.

At Mobimex, each table is created from a single tree trunk. The wood widths cut from it are skilfully placed together to form a table top. The craftsmanship needed for this is as complex as it is creative, and it has a significant impact on the character and the look of the table. You, as a Mobimex customer, have the opportunity to be involved in this crea-tive process and play a part in shaping the product. To enable you to do this, we will send you a photo of the table top assembled from the loose wood widths, if required.For assessment and modification, we provide you with the first photo proposal free of charge and the second photo option resulting from this process is also free. If a final decision is not made from the existing trunk/selection of wood widths a new trunk must be chosen and prepared. For this extra, very time-consuming step, we invoice an extra charge of EUR 160 net (purchase price), not including VAT. For a subsequent change of the type of wood, a flat-rate fee of EUR 270 net (purchase price), not including VAT, is always charged.

Retail in EURO excl. VAT

14

Planning support

You run the entire project, Zoom by Mobimex carries out the planning work on your behalf in the background.

When you commission us with the planning of your project, we investigate the issues critical for the project’s success, such as the room layout, the use of space and us-age-compatible furniture. Hand in hand with the specialist planner, architect, interior designer or the commissioning party, Zoom by Mobimex offers appropriate planning support for distinguished spaces. High-quality, expert solutions with an immaculate sense of style, plus reliable, commensurate consultation services are our strengths. You thus give yourself more freedom and also benefit from our planning know-how.

In this way, we develop tailor-made solutions which create unique spatial experiences.

Services: concept proposals | hand-drawn sketches | detailed furniture proposal | 2D CAD planning | 3D photo-realistic rendering | multimedia planning | prototype construction | custom-made products | samples | logistics coordination

The Zoom by Mobimex planning packages:

START On the basis of the planning data provided by the customer, we analyse the requirements, evaluate the ideal product and draw up an individual quotation free of charge, without drawings or basic presentations on the project.

BASIC On the basis of the planning data provided by the customer, we analyse the requirements, evaluate the ideal product and draw up an individual quotation. We also provide you with 2D CAD planning.

Single office: EUR 205 Distinguished open-plan office space: EUR 890 Conference/meeting/VC room: EUR 365 Reception, communal space: EUR 300

TOP On the basis of the planning data provided by the customer, we analyse the requirements, evaluate the ideal product and draw up an individual quotation. We also provide you with 2D CAD project planning. Furthermore, we also create an illustration of a room of your choice as a hand-drawn sketch or a photo-realistic rendering.

Single office: EUR 770 Distinguished open-plan office space: EUR 1’550 Conference/meeting/VC room: EUR 930 Reception, communal space: EUR 865

If an order is placed for the entire project offered in the Zoom by Mobimex quotation these planning costs will be credited in full. If part of the order is placed the costs will be offset pro rata by Zoom by Mobimex.

All information, graphics, designs, plans, layouts and images created and presented by Zoom by Mobimex are protected by copyright and must not be reproduced, presented or processed without written permission from Zoom by Mobimex, CH-5703 Seon.

15Retail in EURO excl. VAT

14

Planning support

You run the entire project, Zoom by Mobimex carries out the planning work on your behalf in the background.

When you commission us with the planning of your project, we investigate the issues critical for the project’s success, such as the room layout, the use of space and us-age-compatible furniture. Hand in hand with the specialist planner, architect, interior designer or the commissioning party, Zoom by Mobimex offers appropriate planning support for distinguished spaces. High-quality, expert solutions with an immaculate sense of style, plus reliable, commensurate consultation services are our strengths. You thus give yourself more freedom and also benefit from our planning know-how.

In this way, we develop tailor-made solutions which create unique spatial experiences.

Services: concept proposals | hand-drawn sketches | detailed furniture proposal | 2D CAD planning | 3D photo-realistic rendering | multimedia planning | prototype construction | custom-made products | samples | logistics coordination

The Zoom by Mobimex planning packages:

START On the basis of the planning data provided by the customer, we analyse the requirements, evaluate the ideal product and draw up an individual quotation free of charge, without drawings or basic presentations on the project.

BASIC On the basis of the planning data provided by the customer, we analyse the requirements, evaluate the ideal product and draw up an individual quotation. We also provide you with 2D CAD planning.

Single office: EUR 205 Distinguished open-plan office space: EUR 890 Conference/meeting/VC room: EUR 365 Reception, communal space: EUR 300

TOP On the basis of the planning data provided by the customer, we analyse the requirements, evaluate the ideal product and draw up an individual quotation. We also provide you with 2D CAD project planning. Furthermore, we also create an illustration of a room of your choice as a hand-drawn sketch or a photo-realistic rendering.

Single office: EUR 770 Distinguished open-plan office space: EUR 1’550 Conference/meeting/VC room: EUR 930 Reception, communal space: EUR 865

If an order is placed for the entire project offered in the Zoom by Mobimex quotation these planning costs will be credited in full. If part of the order is placed the costs will be offset pro rata by Zoom by Mobimex.

All information, graphics, designs, plans, layouts and images created and presented by Zoom by Mobimex are protected by copyright and must not be reproduced, presented or processed without written permission from Zoom by Mobimex, CH-5703 Seon.

15Retail in EURO excl. VAT

16

Offers | Contracts Offers are made without commitment. Contracts are to be considered as concluded only when there is a written order confirmation. All amendments and additions must be made in writing. Statements made by agents are not valid unless confirmed in writing. Descrip-tions in brochures and price lists are non-binding. We reserve the right to make minor technical, constructive and formal changes. The wood and colour samples may have minor differences in structure and shadings which are unavoidable. Mobimex is unable to accept other business terms unless we have done so expressly in writing. Mobimex products are custom made, and the ordering party is obliged to accept them. Orders cannot be subsequently cancelled. Detailed changes to an order are possible in certain circumstances up to approximately 5 weeks before the confirmed date of delivery. Addi-tional costs will be charged as incurred.

Delivery The dates stated in the order confirmation relate, in all cases, to the time of arrival of the delivery at the stated customer address. Deliveries can only be undertaken if the purchaser has fulfilled all obligations, including those arising from previous contracts. Punctual dispatch is only possible if all the information needed for production has been supplied in good time. Late receipt of colour samples, sizes, etc, will lead to postponement of the stated delivery date. If delivery charges are included in the price, delivery is to the recep-tion ramp of the purchaser’s business premises. Deliveries to private addresses can be agreed upon in special circumstances subject to the customer bearing the additional cost(s). All deliveries exclude moving and assembly. If the date stated in the order confir-mation is exceeded, the purchaser must notify Mobimex in writing of failure to deliver, and at the same time, grant a reasonable period of grace. Force majeure, interruptions to normal business activity, industrial disputes or other such delays beyond the control of Mobimex which affect Mobimex or suppliers of Mobimex, shall absolve Mobimex from delivery obligations for the duration of the interruption or its after-effects.

After a period of 2 months has elapsed, either party of the contract shall be entitled to withdraw from the contract without incurring liability for damages. However, this shall only be the case if the customer has sent a prior, written reminder concerning the delivery and the delay was caused solely by us. The customer is not entitled to assert any claims or exercise any rights – of any kind whatsoever – due to delayed delivery. In particular, claims for damages and penalties for breach of contract based on direct, indirect or consequen-tial damage or secondary damage are ruled out.

If the goods delivery is delayed for reasons attributable to the ordering party, the ordering party shall be charged for the costs associated with storing the goods.

Transfer of Risk Risk is transferred to the purchaser as soon as the goods leave the Mobimex factory by carrier. This also applies if freight charges are borne by the supplier. If goods are picked up from Mobimex, the transfer of risk takes place when they are made ready for collection.

Payment Payments are not regarded as having been made until the sum concerned is accessible by Mobimex. If payment is not rendered in good time, Mobimex reserves the right to charge interest at a rate of at least 4% above the current interest rate charged for a first mortgage, regardless of whether Mobimex elects to exercise any other rights to which Mobimex is entitled. No express statement of arrears of payment has to be issued. If the purchaser fails to render payment for a period of more than 1 week, or if there are justifia-ble doubts as to the purchaser’s ability to do so, Mobimex shall be entitled to cancel all payment deadlines and, in the case of non-fulfilled contracts, to demand cash in advance or to withdraw from the contract. The ordering party is not entitled to withhold payment, and the offsetting of sums due is only permissible if claims have been legally established or are undisputed.

Terms of Payment For orders with a gross value over EUR 20,000.–, a down payment of 60% of the invoice value is required. Payment is due shortly before delivery. The balance is due within 10 to 30 days from the invoice date.

Mobimex AG Conditions of business

17

Property The delivered goods remain the property of Mobimex until the purchaser has satisfied all claims of Mobimex resulting from the business relationship. The purchaser provides surety by assigning their claims from the re-sale of the goods in advance to Mobimex. Provided that Mobimex‘s claims are satisfied, the purchaser may use the goods to which the Mobimex title applies for regular business purposes and call in their own claims in respect of them. The goods must not be pledged or assigned as surety. Attempts to seize them must be reported to Mobimex without delay. If the fulfillment of the claims of Mobimex are considered to be endangered, the purchaser must permit the recovery of the goods to which Mobimex has title, by Mobimex. The purchaser can notify their customers that their claims have been re-assigned and release the necessary documents to Mobimex. Recov-ery of goods to which Mobimex has a title does not imply a withdrawal from the contract.

Warranty Notification in writing of defects in delivered goods, quantity discrepancies or incorrect deliveries must be sent no later than 7 days after the goods have been received. Con-cealed defects must also be notified in writing as soon as they are discovered. Failing this, the purchaser’s right to complain is nullified. This is also the case if the delivered goods were incorrectly treated, modified or repaired by the purchaser without permission form Mobimex. The right of complaint expires, in all cases, 24 months after receipt of the goods.

Excluded from the warranty are signs of wear/usage, damage caused by improper storage and damage due to special versions requested by the customer.

Wood is a natural product and differences in the shades of colour, in the structure of the wood and in the dimensions are thus possible. This applies in particular to shades of colour from colour samples and to supplementary deliveries. These differences do not constitute a reason for a complaint.

If a complaint is justified, Mobimex will either repair or replace the article concerned, as deemed by Mobimex, including transport from and to the customer. For deliveries of spare parts and remediation work, the same warranty deadline shall apply as that for the original delivered items. No other claims whatsoever will be entertained, especially for damage that has not occurred on the delivered items themselves. In the event of a repair or replace-ment delivery proves to be impossible, the purchaser may return the goods or demand a price reduction. No further claims, in particular in respect of consequential damage, loss of profits as well as other direct or indirect damage, will be entertained.

Damage in Transit For technical insurance reasons, damage in transit must be recorded on the bill of lading immediately after the goods are received. Damage in transit that is not visible externally must be noted in writing to the carrier or to Mobimex within 7 days of receipt of the goods. The recipient must prove that the damage was caused by the carrier. If the bill of lading is counter-signed, or if the goods are moved to another place by the recipient, and in all cases, 7 days after their receipt, all claims become null and void.

Liability Claims for damages against Mobimex can only be entertained if the damage was caused deliberately or by gross negligence. In all other cases, no claims for damages will be entertained.

Concluding Provisions The point of origin for deliveries and payments is CH-5703 Seon, Switzerland. Jurisdiction for contracts between private citizens and/or legal entities is the Regional Court in Lenz-burg. Swiss law shall apply to the contractual relationship. However, we are also entitled to prosecute the customer at their legal domicile. The application of the Vienna Convention (United Nations Convention on Contracts for the International Sale of Goods SR 0221.211.1) is explicitly ruled out. In the event of individual provisions being inapplicable, the remaining provisions shall remain in force. The rights of the purchaser, as per the contract, are not transferable.

Mobimex AG | Birren 17 | CH-5703 Seon

Retail in EURO excl. VAT

16

Offers | Contracts Offers are made without commitment. Contracts are to be considered as concluded only when there is a written order confirmation. All amendments and additions must be made in writing. Statements made by agents are not valid unless confirmed in writing. Descrip-tions in brochures and price lists are non-binding. We reserve the right to make minor technical, constructive and formal changes. The wood and colour samples may have minor differences in structure and shadings which are unavoidable. Mobimex is unable to accept other business terms unless we have done so expressly in writing. Mobimex products are custom made, and the ordering party is obliged to accept them. Orders cannot be subsequently cancelled. Detailed changes to an order are possible in certain circumstances up to approximately 5 weeks before the confirmed date of delivery. Addi-tional costs will be charged as incurred.

Delivery The dates stated in the order confirmation relate, in all cases, to the time of arrival of the delivery at the stated customer address. Deliveries can only be undertaken if the purchaser has fulfilled all obligations, including those arising from previous contracts. Punctual dispatch is only possible if all the information needed for production has been supplied in good time. Late receipt of colour samples, sizes, etc, will lead to postponement of the stated delivery date. If delivery charges are included in the price, delivery is to the recep-tion ramp of the purchaser’s business premises. Deliveries to private addresses can be agreed upon in special circumstances subject to the customer bearing the additional cost(s). All deliveries exclude moving and assembly. If the date stated in the order confir-mation is exceeded, the purchaser must notify Mobimex in writing of failure to deliver, and at the same time, grant a reasonable period of grace. Force majeure, interruptions to normal business activity, industrial disputes or other such delays beyond the control of Mobimex which affect Mobimex or suppliers of Mobimex, shall absolve Mobimex from delivery obligations for the duration of the interruption or its after-effects.

After a period of 2 months has elapsed, either party of the contract shall be entitled to withdraw from the contract without incurring liability for damages. However, this shall only be the case if the customer has sent a prior, written reminder concerning the delivery and the delay was caused solely by us. The customer is not entitled to assert any claims or exercise any rights – of any kind whatsoever – due to delayed delivery. In particular, claims for damages and penalties for breach of contract based on direct, indirect or consequen-tial damage or secondary damage are ruled out.

If the goods delivery is delayed for reasons attributable to the ordering party, the ordering party shall be charged for the costs associated with storing the goods.

Transfer of Risk Risk is transferred to the purchaser as soon as the goods leave the Mobimex factory by carrier. This also applies if freight charges are borne by the supplier. If goods are picked up from Mobimex, the transfer of risk takes place when they are made ready for collection.

Payment Payments are not regarded as having been made until the sum concerned is accessible by Mobimex. If payment is not rendered in good time, Mobimex reserves the right to charge interest at a rate of at least 4% above the current interest rate charged for a first mortgage, regardless of whether Mobimex elects to exercise any other rights to which Mobimex is entitled. No express statement of arrears of payment has to be issued. If the purchaser fails to render payment for a period of more than 1 week, or if there are justifia-ble doubts as to the purchaser’s ability to do so, Mobimex shall be entitled to cancel all payment deadlines and, in the case of non-fulfilled contracts, to demand cash in advance or to withdraw from the contract. The ordering party is not entitled to withhold payment, and the offsetting of sums due is only permissible if claims have been legally established or are undisputed.

Terms of Payment For orders with a gross value over EUR 20,000.–, a down payment of 60% of the invoice value is required. Payment is due shortly before delivery. The balance is due within 10 to 30 days from the invoice date.

Mobimex AG Conditions of business

17

Property The delivered goods remain the property of Mobimex until the purchaser has satisfied all claims of Mobimex resulting from the business relationship. The purchaser provides surety by assigning their claims from the re-sale of the goods in advance to Mobimex. Provided that Mobimex‘s claims are satisfied, the purchaser may use the goods to which the Mobimex title applies for regular business purposes and call in their own claims in respect of them. The goods must not be pledged or assigned as surety. Attempts to seize them must be reported to Mobimex without delay. If the fulfillment of the claims of Mobimex are considered to be endangered, the purchaser must permit the recovery of the goods to which Mobimex has title, by Mobimex. The purchaser can notify their customers that their claims have been re-assigned and release the necessary documents to Mobimex. Recov-ery of goods to which Mobimex has a title does not imply a withdrawal from the contract.

Warranty Notification in writing of defects in delivered goods, quantity discrepancies or incorrect deliveries must be sent no later than 7 days after the goods have been received. Con-cealed defects must also be notified in writing as soon as they are discovered. Failing this, the purchaser’s right to complain is nullified. This is also the case if the delivered goods were incorrectly treated, modified or repaired by the purchaser without permission form Mobimex. The right of complaint expires, in all cases, 24 months after receipt of the goods.

Excluded from the warranty are signs of wear/usage, damage caused by improper storage and damage due to special versions requested by the customer.

Wood is a natural product and differences in the shades of colour, in the structure of the wood and in the dimensions are thus possible. This applies in particular to shades of colour from colour samples and to supplementary deliveries. These differences do not constitute a reason for a complaint.

If a complaint is justified, Mobimex will either repair or replace the article concerned, as deemed by Mobimex, including transport from and to the customer. For deliveries of spare parts and remediation work, the same warranty deadline shall apply as that for the original delivered items. No other claims whatsoever will be entertained, especially for damage that has not occurred on the delivered items themselves. In the event of a repair or replace-ment delivery proves to be impossible, the purchaser may return the goods or demand a price reduction. No further claims, in particular in respect of consequential damage, loss of profits as well as other direct or indirect damage, will be entertained.

Damage in Transit For technical insurance reasons, damage in transit must be recorded on the bill of lading immediately after the goods are received. Damage in transit that is not visible externally must be noted in writing to the carrier or to Mobimex within 7 days of receipt of the goods. The recipient must prove that the damage was caused by the carrier. If the bill of lading is counter-signed, or if the goods are moved to another place by the recipient, and in all cases, 7 days after their receipt, all claims become null and void.

Liability Claims for damages against Mobimex can only be entertained if the damage was caused deliberately or by gross negligence. In all other cases, no claims for damages will be entertained.

Concluding Provisions The point of origin for deliveries and payments is CH-5703 Seon, Switzerland. Jurisdiction for contracts between private citizens and/or legal entities is the Regional Court in Lenz-burg. Swiss law shall apply to the contractual relationship. However, we are also entitled to prosecute the customer at their legal domicile. The application of the Vienna Convention (United Nations Convention on Contracts for the International Sale of Goods SR 0221.211.1) is explicitly ruled out. In the event of individual provisions being inapplicable, the remaining provisions shall remain in force. The rights of the purchaser, as per the contract, are not transferable.

Mobimex AG | Birren 17 | CH-5703 Seon

Retail in EURO excl. VAT

20 - 22

24 - 25

26 - 28

29 - 30

31 - 32

33 - 34

35

36

37

Zoom

AVA

CUHL

EKKO

IN-AGA

MAISA

NIK

OSCAR

RAD

Zoom individual tables

20 - 22

24 - 25

26 - 28

29 - 30

31 - 32

33 - 34

35

36

37

Zoom

AVA

CUHL

EKKO

IN-AGA

MAISA

NIK

OSCAR

RAD

Zoom individual tables

20

AVA «Boomerang»

Top Solid wood, selection, 40 mm thicknessEdge according to the collectionSurface aquered, oiled or soapedBase Steel powder coated 48 cm

or for extra charge: embossed noble sheet of copper or brass according to the collection

Design Iria Degen

AVA Rectangular table

Top Solid wood, selection, 28 or 40 mm thicknessEdge according to the collectionSurface aquered, oiled or soapedBase Steel powder coated 48 cm

or for extra charge: embossed noble sheet of copper or brass according to the collection

Design Iria Degen

Selection, 28 mm thickness

Article L x W x H in cm Table area m2 Beech Heartwood ash

+Heartwood ash

black stained

SycamoreElm Maple

Ash

Cherry Oak

Pear(over 180 cm

longitudinally jointed)

Black Walnut(with sapwood)

Walnut(over 240 cm

longitudinally jointed)

Black Walnut(without sapwood)

Smoked oak

AVABOOM 325 x 90/168 x 75Other dimensions on demand

Article L x W x H in cm Table area m2 Beech Heartwood ash

+Heartwood ash

black stained

SycamoreElm Maple

Ash

Cherry Oak

Pear(over 180 cm

longitudinally jointed)

Black Walnut(with sapwood)

Walnut(over 240 cm

longitudinally jointed)

Black Walnut(without sapwood)

Smoked oak

AVARE200P28 200 x 90 x 74 1.80AVARE220P28 220 x 90 x 74 1.98AVARE240P28 240 x 100 x 74 2.40AVARE260P28 260 x 100 x 74 2.60AVARE280P28 280 x 110 x 74 3.08AVARE300P28 300 x 110 x 74 3.30Surface difference per m2 for non-standard sizes

Article L x W x H in cm Table area m2 Beech Heartwood ash

+Heartwood ash

black stained

SycamoreElm Maple

Ash

Cherry Oak

Pear(over 180 cm

longitudinally jointed)

Black Walnut(with sapwood)

Walnut(over 240 cm

longitudinally jointed)

Black Walnut(without sapwood)

Smoked oak

AVARE200P40 200 x 90 x 75 1.80AVARE220P40 220 x 90 x 75 1.98AVARE240P40 240 x 100 x 75 2.40AVARE260P40 260 x 100 x 75 2.60AVARE280P40 280 x 110 x 75 3.08AVARE300P40 300 x 110 x 75 3.30AVARE320P40 320 x 110 x 75 3.52AVARE340P40 340 x 110 x 75 3.74AVARE360P40 360 x 110 x 75 3.96AVARE380P40 380 x 110 x 75 4.18Surface difference per m2 for non-standard sizes

Selection, 40 mm thickness, from 400 cm the table needs a third foot

9580 10370 10975 13745 15720

4515 4650 4805 5510 60254710 4865 5045 5845 64505220 5420 5630 6605 73255470 5680 5905 6970 77456055 6310 6580 7835 87606335 6600 6890 8235 92301040 1175 1400 1500 1825

4670 4940 5160 6170 68454880 5205 5450 6605 74005435 5820 6120 7520 84855695 6120 6445 7950 90056330 6830 7215 9015 102456620 7160 7570 9485 108206945 7560 8015 10150 116707235 7885 8375 10640 122507535 8220 8740 11135 128457830 8550 9100 11630 134351040 1175 1400 1500 1825

Extra charge Base Embossed noble sheet in Nordic copper or brass, structure according to collection, for the 3 feet 3830

Extra charge Base Embossed noble sheet in Nordic copper or brass, structure according to collection, for the 2 feet 2555 Cable channel vertical a sheet metal segment removable 165

21

AVA Elliptical table

Top Solid wood, selection, 28 or 40 mm thicknessEdge according to the collectionSurface aquered, oiled or soapedBase Steel powder coated 48 cm

or for extra charge: embossed noble sheet of copper or brass according to the collection

Design Iria Degen

Selection, 28 mm thickness

Article L x W x H in cm Table area m2 Beech Heartwood ash

+Heartwood ash

black stained

SycamoreElm Maple

Ash

Cherry Oak

Pear(over 180 cm

longitudinally jointed)

Black Walnut(with sapwood)

Walnut(over 240 cm

longitudinally jointed)

Black Walnut(without sapwood)

Smoked oak

AVASE200P28 200 x 110 x 74 2.20AVASE220P28 220 x 110 x 74 2.42AVASE240P28 240 x 120 x 74 2.88AVASE260P28 260 x 120 x 74 3.12AVASE280P28 280 x 120 x 74 3.36AVASE300P28 300 x 130 x 74 3.90Surface difference per m2 for non-standard sizes

Article L x W x H in cm Table area m2 Beech Heartwood ash

+Heartwood ash

black stained

SycamoreElm Maple

Ash

Cherry Oak

Pear(over 180 cm

longitudinally jointed)

Black Walnut(with sapwood)

Walnut(over 240 cm

longitudinally jointed)

Black Walnut(without sapwood)

Smoked oak

AVASE200P40 200 x 110 x 75 2.20AVASE220P40 220 x 110 x 75 2.42AVASE240P40 240 x 120 x 75 2.88AVASE260P40 260 x 120 x 75 3.12AVASE280P40 280 x 120 x 75 3.36AVASE300P40 300 x 130 x 75 3.90Surface difference per m2 for non-standard sizes

Selection, 40 mm thickness

4930 5070 5300 6145 67655210 5375 5650 6615 73505780 5980 6300 7450 83006060 6280 6630 7875 88006340 6575 6955 8290 92856965 7235 7670 9235 103801040 1175 1400 1500 1825

5120 5415 5745 6960 77905425 5775 6160 7540 85156030 6450 6900 8545 97106340 6795 7290 9070 103106635 7115 7660 9575 109157305 7870 8490 10715 122651040 1175 1400 1500 1825

Extra charge Base Embossed noble sheet in Nordic copper or brass, structure according to collection, for the 2 feet 2555 Cable channel vertical a sheet metal segment removable 165

Retail in EURO excl. VAT

20

AVA «Boomerang»

Top Solid wood, selection, 40 mm thicknessEdge according to the collectionSurface aquered, oiled or soapedBase Steel powder coated 48 cm

or for extra charge: embossed noble sheet of copper or brass according to the collection

Design Iria Degen

AVA Rectangular table

Top Solid wood, selection, 28 or 40 mm thicknessEdge according to the collectionSurface aquered, oiled or soapedBase Steel powder coated 48 cm

or for extra charge: embossed noble sheet of copper or brass according to the collection

Design Iria Degen

Selection, 28 mm thickness

Article L x W x H in cm Table area m2 Beech Heartwood ash

+Heartwood ash

black stained

SycamoreElm Maple

Ash

Cherry Oak

Pear(over 180 cm

longitudinally jointed)

Black Walnut(with sapwood)

Walnut(over 240 cm

longitudinally jointed)

Black Walnut(without sapwood)

Smoked oak

AVABOOM 325 x 90/168 x 75Other dimensions on demand

Article L x W x H in cm Table area m2 Beech Heartwood ash

+Heartwood ash

black stained

SycamoreElm Maple

Ash

Cherry Oak

Pear(over 180 cm

longitudinally jointed)

Black Walnut(with sapwood)

Walnut(over 240 cm

longitudinally jointed)

Black Walnut(without sapwood)

Smoked oak

AVARE200P28 200 x 90 x 74 1.80AVARE220P28 220 x 90 x 74 1.98AVARE240P28 240 x 100 x 74 2.40AVARE260P28 260 x 100 x 74 2.60AVARE280P28 280 x 110 x 74 3.08AVARE300P28 300 x 110 x 74 3.30Surface difference per m2 for non-standard sizes

Article L x W x H in cm Table area m2 Beech Heartwood ash

+Heartwood ash

black stained

SycamoreElm Maple

Ash

Cherry Oak

Pear(over 180 cm

longitudinally jointed)

Black Walnut(with sapwood)

Walnut(over 240 cm

longitudinally jointed)

Black Walnut(without sapwood)

Smoked oak

AVARE200P40 200 x 90 x 75 1.80AVARE220P40 220 x 90 x 75 1.98AVARE240P40 240 x 100 x 75 2.40AVARE260P40 260 x 100 x 75 2.60AVARE280P40 280 x 110 x 75 3.08AVARE300P40 300 x 110 x 75 3.30AVARE320P40 320 x 110 x 75 3.52AVARE340P40 340 x 110 x 75 3.74AVARE360P40 360 x 110 x 75 3.96AVARE380P40 380 x 110 x 75 4.18Surface difference per m2 for non-standard sizes

Selection, 40 mm thickness, from 400 cm the table needs a third foot

9580 10370 10975 13745 15720

4515 4650 4805 5510 60254710 4865 5045 5845 64505220 5420 5630 6605 73255470 5680 5905 6970 77456055 6310 6580 7835 87606335 6600 6890 8235 92301040 1175 1400 1500 1825

4670 4940 5160 6170 68454880 5205 5450 6605 74005435 5820 6120 7520 84855695 6120 6445 7950 90056330 6830 7215 9015 102456620 7160 7570 9485 108206945 7560 8015 10150 116707235 7885 8375 10640 122507535 8220 8740 11135 128457830 8550 9100 11630 134351040 1175 1400 1500 1825

Extra charge Base Embossed noble sheet in Nordic copper or brass, structure according to collection, for the 3 feet 3830

Extra charge Base Embossed noble sheet in Nordic copper or brass, structure according to collection, for the 2 feet 2555 Cable channel vertical a sheet metal segment removable 165

21

AVA Elliptical table

Top Solid wood, selection, 28 or 40 mm thicknessEdge according to the collectionSurface aquered, oiled or soapedBase Steel powder coated 48 cm

or for extra charge: embossed noble sheet of copper or brass according to the collection

Design Iria Degen

Selection, 28 mm thickness

Article L x W x H in cm Table area m2 Beech Heartwood ash

+Heartwood ash

black stained

SycamoreElm Maple

Ash

Cherry Oak

Pear(over 180 cm

longitudinally jointed)

Black Walnut(with sapwood)

Walnut(over 240 cm

longitudinally jointed)

Black Walnut(without sapwood)

Smoked oak

AVASE200P28 200 x 110 x 74 2.20AVASE220P28 220 x 110 x 74 2.42AVASE240P28 240 x 120 x 74 2.88AVASE260P28 260 x 120 x 74 3.12AVASE280P28 280 x 120 x 74 3.36AVASE300P28 300 x 130 x 74 3.90Surface difference per m2 for non-standard sizes

Article L x W x H in cm Table area m2 Beech Heartwood ash

+Heartwood ash

black stained

SycamoreElm Maple

Ash

Cherry Oak

Pear(over 180 cm

longitudinally jointed)

Black Walnut(with sapwood)

Walnut(over 240 cm

longitudinally jointed)

Black Walnut(without sapwood)

Smoked oak

AVASE200P40 200 x 110 x 75 2.20AVASE220P40 220 x 110 x 75 2.42AVASE240P40 240 x 120 x 75 2.88AVASE260P40 260 x 120 x 75 3.12AVASE280P40 280 x 120 x 75 3.36AVASE300P40 300 x 130 x 75 3.90Surface difference per m2 for non-standard sizes

Selection, 40 mm thickness

4930 5070 5300 6145 67655210 5375 5650 6615 73505780 5980 6300 7450 83006060 6280 6630 7875 88006340 6575 6955 8290 92856965 7235 7670 9235 103801040 1175 1400 1500 1825

5120 5415 5745 6960 77905425 5775 6160 7540 85156030 6450 6900 8545 97106340 6795 7290 9070 103106635 7115 7660 9575 109157305 7870 8490 10715 122651040 1175 1400 1500 1825

Extra charge Base Embossed noble sheet in Nordic copper or brass, structure according to collection, for the 2 feet 2555 Cable channel vertical a sheet metal segment removable 165

Retail in EURO excl. VAT

22

AVA Round table

Top Solid wood, selection, 28 or 40 mm thicknessEdge according to the collectionSurface aquered, oiled or soapedBase Steel powder coated 48 or 60 cm

or for extra charge: embossed noble sheet of copper or brass according to the collection

Design Iria Degen

Selection, 28 mm thickness

Article x H in cm Base diameter Table area m2 Beech Heartwood ash

+Heartwood ash

black stained

SycamoreElm Maple

Ash

Cherry Oak

Pear(over 180 cm

longitudinally jointed)

Black Walnut(with sapwood)

Walnut(over 240 cm

longitudinally jointed)

Black Walnut(without sapwood)

Smoked oak

AVARD100P28 100 x 74 48 1.00AVARD110P28 110 x 74 48 1.21AVARD120P28 120 x 74 48 1.44AVARD130P28 130 x 74 48 1.69AVARD140P28 140 x 74 48 1.96AVARD150P28 150 x 74 48 2.25AVARD160P28 160 x 74 60 2.56AVARD170P28 170 x 74 60 2.89AVARD180P28 180 x 74 60 3.24Surface difference per m2 for non-standard sizes

Article x H in cm Base diameter Table area m2 Beech Heartwood ash

+Heartwood ash

black stained

SycamoreElm Maple

Ash

Cherry Oak

Pear(over 180 cm

longitudinally jointed)

Black Walnut(with sapwood)

Walnut(over 240 cm

longitudinally jointed)

Black Walnut(without sapwood)

Smoked oak

AVARD100P40 100 x 75 48 1.00AVARD110P40 110 x 75 48 1.21AVARD120P40 120 x 75 48 1.44AVARD130P40 130 x 75 48 1.69AVARD140P40 140 x 75 48 1.96AVARD150P40 150 x 75 48 2.25AVARD160P40 160 x 75 60 2.56AVARD170P40 170 x 75 60 2.89AVARD180P40 180 x 75 60 3.24Surface difference per m2 for non-standard sizes

Selection, 40 mm thickness

2940 2995 3100 3470 37603145 3220 3355 3820 41803370 3460 3615 4170 45953615 3715 3905 4545 50453880 3990 4200 4960 55204220 4355 4600 5470 61104600 4755 5025 6020 67405000 5175 5490 6605 74105420 5615 5965 7210 81101040 1175 1400 1500 1825

3030 3145 3295 3825 41953250 3415 3600 4265 47453490 3685 3905 4700 52603755 3980 4245 5170 58254040 4305 4605 5680 64204410 4710 5055 6290 71454815 5160 5550 6960 79205255 5635 6075 7670 87505690 6125 6620 8400 96001040 1175 1400 1500 1825

Extra charge Base Embossed noble sheet in Nordic copper or brass, structure according to collection, 48 cm 1275 60 cm 1720 Cable channel vertical a sheet metal segment removable 165

23Retail in EURO excl. VAT

22

AVA Round table

Top Solid wood, selection, 28 or 40 mm thicknessEdge according to the collectionSurface aquered, oiled or soapedBase Steel powder coated 48 or 60 cm

or for extra charge: embossed noble sheet of copper or brass according to the collection

Design Iria Degen

Selection, 28 mm thickness

Article x H in cm Base diameter Table area m2 Beech Heartwood ash

+Heartwood ash

black stained

SycamoreElm Maple

Ash

Cherry Oak

Pear(over 180 cm

longitudinally jointed)

Black Walnut(with sapwood)

Walnut(over 240 cm

longitudinally jointed)

Black Walnut(without sapwood)

Smoked oak

AVARD100P28 100 x 74 48 1.00AVARD110P28 110 x 74 48 1.21AVARD120P28 120 x 74 48 1.44AVARD130P28 130 x 74 48 1.69AVARD140P28 140 x 74 48 1.96AVARD150P28 150 x 74 48 2.25AVARD160P28 160 x 74 60 2.56AVARD170P28 170 x 74 60 2.89AVARD180P28 180 x 74 60 3.24Surface difference per m2 for non-standard sizes

Article x H in cm Base diameter Table area m2 Beech Heartwood ash

+Heartwood ash

black stained

SycamoreElm Maple

Ash

Cherry Oak

Pear(over 180 cm

longitudinally jointed)

Black Walnut(with sapwood)

Walnut(over 240 cm

longitudinally jointed)

Black Walnut(without sapwood)

Smoked oak

AVARD100P40 100 x 75 48 1.00AVARD110P40 110 x 75 48 1.21AVARD120P40 120 x 75 48 1.44AVARD130P40 130 x 75 48 1.69AVARD140P40 140 x 75 48 1.96AVARD150P40 150 x 75 48 2.25AVARD160P40 160 x 75 60 2.56AVARD170P40 170 x 75 60 2.89AVARD180P40 180 x 75 60 3.24Surface difference per m2 for non-standard sizes

Selection, 40 mm thickness

2940 2995 3100 3470 37603145 3220 3355 3820 41803370 3460 3615 4170 45953615 3715 3905 4545 50453880 3990 4200 4960 55204220 4355 4600 5470 61104600 4755 5025 6020 67405000 5175 5490 6605 74105420 5615 5965 7210 81101040 1175 1400 1500 1825

3030 3145 3295 3825 41953250 3415 3600 4265 47453490 3685 3905 4700 52603755 3980 4245 5170 58254040 4305 4605 5680 64204410 4710 5055 6290 71454815 5160 5550 6960 79205255 5635 6075 7670 87505690 6125 6620 8400 96001040 1175 1400 1500 1825

Extra charge Base Embossed noble sheet in Nordic copper or brass, structure according to collection, 48 cm 1275 60 cm 1720 Cable channel vertical a sheet metal segment removable 165

23Retail in EURO excl. VAT

24

Cuhl Square table top, rounded-off corners | Selection

Top Solid wood, BV 40 selection, 40 mm thicknessEdge K 18Surface lacquered, oiled or soaped

1 centre leg, consisting of standard solid-wood post, to match table top. Cast iron base lacquered with basic colour (lacquered base limited scratchproof) Large floor plate: 58 x 58 cm

Design Cornelia Uhl

Cuhl Flat-sided oval I Selection

Large floor plate: 70 x 50 cm

Cuhl Rectangle/oval I Selection

Large floor plate: 70 x 50 cm

Article

CRQ110CRQ120CRQ130CRQ140CRQ150

110 x 110 x 74120 x 120 x 74130 x 130 x 74140 x 140 x 74150 x 150 x 74

1.211.441.691.962.25

L x W x H in cm Table area m² BeechHeartwood

SycamoreElm | Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

Surface difference per m² for non-standard sizes

Article

CSO150CSO160CSO170CSO180CSO190CSO200CSO210CSO220CSO230CSO240

150 x 90 x 74160 x 95 x 74170 x 95 x 74180 x 100 x 74190 x 100 x 74200 x 105 x 74210 x 105 x 74220 x 110 x 74230 x 115 x 74240 x 115 x 74

1.351.521.621.801.902.102.212.422.652.76

L x W x H in cm Table area m² BeechHeartwood

SycamoreElm | Maple

Ash

CherryOak

Surface difference per m² for non-standard sizes

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

Article

CREO150CREO160CREO170CREO180CREO190CREO200CREO210CREO220CREO230CREO240

150 x 95 x 74160 x 95 x 74170 x 100 x 74180 x 100 x 74190 x 100 x 74200 x 105 x 74210 x 110 x 74220 x 115 x 74230 x 115 x 74240 x 115 x 74

1.431.521.701.801.902.102.312.532.652.76

L x W x H in cm Table area m² BeechHeartwood

SycamoreElm | Maple

Ash

CherryOak

Surface difference per m² for non-standard sizes

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

Extra charge Surface Table stained according to sample, per table and colour 255Extra charge Base Base in accent colour or according to RAL/NCS 255Extra charge Cable channel Cable channel through leg and floor plate 215

3125 3450 3760 4125 48353455 3835 4185 4620 54503805 4245 4660 5160 61154195 4695 5180 5745 68404610 5180 5735 6415 76751040 1175 1400 1500 1825

3455 3840 4185 4645 54653710 4125 4515 5055 59703855 4305 4705 5290 62804135 4630 5105 5775 68804315 4830 5320 6085 72704635 5205 5745 6620 79354820 5420 6000 6930 83155175 5825 6470 7520 90555590 6325 7030 8305 100305785 6545 7285 8645 104451040 1175 1400 1500 1825

3565 3965 4320 4810 56753710 4125 4515 5055 59703975 4435 4865 5475 65104135 4630 5105 5775 68804315 4830 5320 6085 72704635 5205 5745 6620 79354975 5595 6210 7185 86305335 6025 6690 7785 93755590 6325 7030 8305 100305785 6545 7285 8645 104451040 1175 1400 1500 1825

25

Cuhl Square table top, rounded-off corners with extension I Selection

Top Solid wood, BV 40 selection, 40 mm thicknessEdge K 18Surface lacquered, oiled or soapedInsert 1 insert (must be stowed separately), width 50 cmBase 2 centre legs, consisting of standard solid-wood post,

to match table top. Cast iron base lacquered with basic colour (lacquered base limited scratchproof)

Design Cornelia Uhl

Cuhl Rectangle/oval I Selection

Top Solid wood, BV 40 selection, 40 mm thicknessEdge K 18Surface lacquered, oiled or soapedBase 2 centre legs, consisting of standard solid-wood post,

to match table top. Cast iron base lacquered with basic colour (lacquered base limited scratchproof)

Design Cornelia Uhl

Large floor plate: 58 x 58 cm

Wooden extension - Width: 50 cm

Article

CRQ120HCRQ130H

120 x 120 x 74130 x 130 x 74

L x W x H in cm BeechHeartwood

SycamoreElm | Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

Article

CRQ120ACRQ130A

120 x 120 x 74130 x 130 x 74

L x W x H in cm BeechHeartwood

SycamoreElm | Maple

Ash

CherryOak

Aluminium extension (Colour according to the cast iron base) - Width: 50 cm

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

Article

CREO250CREO260CREO280CREO300CREO320CREO340CREO360CREO380CREO400

250 x 115 x 74260 x 115 x 74280 x 115 x 74300 x 120 x 74320 x 120 x 74340 x 120 x 74360 x 120 x 74380 x 125 x 74400 x 125 x 74

2.882.993.223.603.844.084.324.755.00

L x W x H in cm Table area m² BeechHeartwood

SycamoreElm | Maple

Ash

CherryOak

Flächendifferenz pro m² für Wunschmasse

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

Extra charge Surface Table stained according to sample, per table and colour 255Extra charge Base Base in accent colour or according to RAL/NCS 255Extra charge Cable channel Cable channel through leg and floor plate 215

7230 8025 8800 10175 120557445 8280 9100 10560 125357885 8800 9695 11345 135208590 9610 10610 12560 150309075 10180 11275 13440 161359580 10770 11950 14365 17270

10095 11365 12635 15305 1845010935 12355 13765 16830 2034511470 12975 14490 17880 21670

1040 1175 1400 1500 1825

4995 5385 5720 6155 69805325 5760 6160 6670 7615

5140 5650 6135 6725 78455545 6120 6675 7335 8600

Retail in EURO excl. VAT

24

Cuhl Square table top, rounded-off corners | Selection

Top Solid wood, BV 40 selection, 40 mm thicknessEdge K 18Surface lacquered, oiled or soaped

1 centre leg, consisting of standard solid-wood post, to match table top. Cast iron base lacquered with basic colour (lacquered base limited scratchproof) Large floor plate: 58 x 58 cm

Design Cornelia Uhl

Cuhl Flat-sided oval I Selection

Large floor plate: 70 x 50 cm

Cuhl Rectangle/oval I Selection

Large floor plate: 70 x 50 cm

Article

CRQ110CRQ120CRQ130CRQ140CRQ150

110 x 110 x 74120 x 120 x 74130 x 130 x 74140 x 140 x 74150 x 150 x 74

1.211.441.691.962.25

L x W x H in cm Table area m² BeechHeartwood

SycamoreElm | Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

Surface difference per m² for non-standard sizes

Article

CSO150CSO160CSO170CSO180CSO190CSO200CSO210CSO220CSO230CSO240

150 x 90 x 74160 x 95 x 74170 x 95 x 74180 x 100 x 74190 x 100 x 74200 x 105 x 74210 x 105 x 74220 x 110 x 74230 x 115 x 74240 x 115 x 74

1.351.521.621.801.902.102.212.422.652.76

L x W x H in cm Table area m² BeechHeartwood

SycamoreElm | Maple

Ash

CherryOak

Surface difference per m² for non-standard sizes

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

Article

CREO150CREO160CREO170CREO180CREO190CREO200CREO210CREO220CREO230CREO240

150 x 95 x 74160 x 95 x 74170 x 100 x 74180 x 100 x 74190 x 100 x 74200 x 105 x 74210 x 110 x 74220 x 115 x 74230 x 115 x 74240 x 115 x 74

1.431.521.701.801.902.102.312.532.652.76

L x W x H in cm Table area m² BeechHeartwood

SycamoreElm | Maple

Ash

CherryOak

Surface difference per m² for non-standard sizes

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

Extra charge Surface Table stained according to sample, per table and colour 255Extra charge Base Base in accent colour or according to RAL/NCS 255Extra charge Cable channel Cable channel through leg and floor plate 215

3125 3450 3760 4125 48353455 3835 4185 4620 54503805 4245 4660 5160 61154195 4695 5180 5745 68404610 5180 5735 6415 76751040 1175 1400 1500 1825

3455 3840 4185 4645 54653710 4125 4515 5055 59703855 4305 4705 5290 62804135 4630 5105 5775 68804315 4830 5320 6085 72704635 5205 5745 6620 79354820 5420 6000 6930 83155175 5825 6470 7520 90555590 6325 7030 8305 100305785 6545 7285 8645 104451040 1175 1400 1500 1825

3565 3965 4320 4810 56753710 4125 4515 5055 59703975 4435 4865 5475 65104135 4630 5105 5775 68804315 4830 5320 6085 72704635 5205 5745 6620 79354975 5595 6210 7185 86305335 6025 6690 7785 93755590 6325 7030 8305 100305785 6545 7285 8645 104451040 1175 1400 1500 1825

25

Cuhl Square table top, rounded-off corners with extension I Selection

Top Solid wood, BV 40 selection, 40 mm thicknessEdge K 18Surface lacquered, oiled or soapedInsert 1 insert (must be stowed separately), width 50 cmBase 2 centre legs, consisting of standard solid-wood post,

to match table top. Cast iron base lacquered with basic colour (lacquered base limited scratchproof)

Design Cornelia Uhl

Cuhl Rectangle/oval I Selection

Top Solid wood, BV 40 selection, 40 mm thicknessEdge K 18Surface lacquered, oiled or soapedBase 2 centre legs, consisting of standard solid-wood post,

to match table top. Cast iron base lacquered with basic colour (lacquered base limited scratchproof)

Design Cornelia Uhl

Large floor plate: 58 x 58 cm

Wooden extension - Width: 50 cm

Article

CRQ120HCRQ130H

120 x 120 x 74130 x 130 x 74

L x W x H in cm BeechHeartwood

SycamoreElm | Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

Article

CRQ120ACRQ130A

120 x 120 x 74130 x 130 x 74

L x W x H in cm BeechHeartwood

SycamoreElm | Maple

Ash

CherryOak

Aluminium extension (Colour according to the cast iron base) - Width: 50 cm

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

Article

CREO250CREO260CREO280CREO300CREO320CREO340CREO360CREO380CREO400

250 x 115 x 74260 x 115 x 74280 x 115 x 74300 x 120 x 74320 x 120 x 74340 x 120 x 74360 x 120 x 74380 x 125 x 74400 x 125 x 74

2.882.993.223.603.844.084.324.755.00

L x W x H in cm Table area m² BeechHeartwood

SycamoreElm | Maple

Ash

CherryOak

Flächendifferenz pro m² für Wunschmasse

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

Extra charge Surface Table stained according to sample, per table and colour 255Extra charge Base Base in accent colour or according to RAL/NCS 255Extra charge Cable channel Cable channel through leg and floor plate 215

7230 8025 8800 10175 120557445 8280 9100 10560 125357885 8800 9695 11345 135208590 9610 10610 12560 150309075 10180 11275 13440 161359580 10770 11950 14365 17270

10095 11365 12635 15305 1845010935 12355 13765 16830 2034511470 12975 14490 17880 216701040 1175 1400 1500 1825

4995 5385 5720 6155 69805325 5760 6160 6670 7615

5140 5650 6135 6725 78455545 6120 6675 7335 8600

Retail in EURO excl. VAT

26

EKKO 22 + 222 | Rectangular table

Top Solid wood, selection, 28 mm thicknessEdge K 79 Surface lacquered, oiled or soapedBase 2 V-legs with a visible mounting connector in steel,

optionally deep black lacquered or polished chrome-plated. (3 V-legs above a length of 360cm)

Design Wolfgang C. R. Mezger

Article Table area m² Number of V-legs

L x W x H in cm

Surface difference per m² for non-standard sizes

Max. table width for V-leg: 130 cm

E22RE220E22RE240E22RE260E22RE280E22RE300E22RE320E22RE340E222RE360E222RE380E222RE400E222RE420E222RE440E222RE460

220 x 110 x 74240 x 110 x 74260 x 110 x 74280 x 110 x 74300 x 120 x 74320 x 120 x 74340 x 120 x 74360 x 120 x 74380 x 120 x 74400 x 130 x 74420 x 130 x 74440 x 130 x 74460 x 130 x 74

2.422.642.863.083.603.844.084.324.565.205.465.725.98

2222222333333

EKKO 33 | Rectangular table

Top Solid wood, selection, 28 mm thicknessEdge K 79 Surface lacquered, oiled or soapedBase 2 x 3 part legs in steel, optionally deep black lacquered or

polished chrome-plated. Design Wolfgang C. R. Mezger

Article Table area m²L x W x H in cm

Surface difference per m² for non-standard sizes

Max. table width for 3-leg version: 140 cm

E33RE280E33RE300E33RE320E33RE340E33RE360E33RE380E33RE400E33RE420E33RE440

280 x 110 x 74300 x 120 x 74320 x 120 x 74340 x 120 x 74360 x 120 x 74380 x 120 x 74400 x 130 x 74420 x 130 x 74440 x 130 x 74

3.083.603.844.084.324.565.205.465.72

Number of legs

222222222

BeechHeartwood

BeechHeartwood

SycamoreElm | Maple

Ash

SycamoreElm | Maple

Ash

CherryOak

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

Extra charge Surface Table stained according to sample, per table and colour 255Extra charge Base Base steel lacquered according to RAL/NCS, per base and per colour 495 Base matt chrome-plated EKKO 22, per V-base 180 Base matt chrome-plated EKKO 33, per 3-base 270

4455 4840 5290 5890 69354785 5210 5715 6420 76005120 5600 6150 6980 82755480 6010 6605 7570 89956250 6880 7600 8785 105106675 7350 8130 9470 113507100 7835 8685 10190 122408465 9250 10165 11850 140658910 9760 10730 12615 150059915 10885 12020 14300 17085

10400 11445 12630 15180 1816510895 11995 13260 16075 1929011400 12565 13910 17000 204251040 1175 1400 1500 1825

6900 7440 8070 9055 105407675 8315 9060 10305 120758100 8795 9595 11000 129409160 9915 10790 12355 144709600 10415 11355 13100 15390

10050 10915 11925 13875 1634511500 12505 13675 16040 1893011995 13065 14300 16930 2002512490 13620 14935 17845 211701040 1175 1400 1500 1825

27

EKKO 44 | Rectangular table

Top Solid wood, selection, 28 mm thicknessEdge K 79 Surface lacquered, oiled or soapedBase 2 x 4 part legs in steel, optionally deep black lacquered or

polished chrome-plated. Design Wolfgang C. R. Mezger

Article Table area m²L x W x H in cm

Surface difference per m² for non-standard sizes

Max. table width with 4-leg version: 160 cm

E44RE340E44RE360E44RE380E44RE400E44RE420E44RE440E44RE460E44RE480E44RE500

340 x 130 x 74360 x 130 x 74380 x 130 x 74400 x 140 x 74420 x 140 x 74440 x 140 x 74460 x 140 x 74480 x 140 x 74500 x 150 x 74

4.424.684.945.605.886.166.446.727.50

EKKO 3 | Round table

Top Solid wood, selection, 28 mm thicknessEdge K 79 Surface lacquered, oiled or soapedBase 1 x 3 part leg in steel, optionally deep black lacquered or polished chrome-plated. Design Wolfgang C. R. Mezger

Maximum diameter: 130 cm

Article Table area m² x H in cm

Surface difference per m² for non-standard sizes

E3RD100E3RD110E3RD120E3RD130

1.001.211.441.69

100 x 74 110 x 74 120 x 74 130 x 74

EKKO 4 | Round table

Top Solid wood, selection, 28 mm thicknessEdge K 79Surface lacquered, oiled or soapedBase 1 x 4 part leg in steel, optionally deep black lacquered or polished chrome-plated. Design Wolfgang C. R. Mezger

Maximum diameter: 180 cm

Article Table area m² x H in cm

Surface difference per m² for non-standard sizes

E4RD140E4RD150E4RD160E4RD170E4RD180

1.962.252.562.893.24

140 x 74 150 x 74 160 x 74 170 x 74 180 x 74

Number of legs

222222222

BeechHeartwood

SycamoreElm | Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

BeechHeartwood

SycamoreElm | Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

BeechHeartwood

SycamoreElm | Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

Extra charge Surface Table stained according to sample, per table and colour 255Extra charge Base Base steel lacquered according to RAL/NCS, per base and per colour 495 Base matt chrome-plated EKKO 33, per 3-base 270 Base matt chrome-plated EKKO 44 per 4-base 355

9875 10685 11635 13325 1562011005 11880 12905 14800 1728011485 12425 13515 15635 1831513305 14385 15640 18195 2129013835 14985 16315 19150 2248514365 15585 17000 20135 2370014910 16205 17700 21150 2496015445 16805 18380 22200 2625016730 18255 20035 24555 291801040 1175 1400 1500 1825

2685 2840 3020 3180 35752930 3125 3345 3525 40103195 3425 3690 3910 44853830 4090 4395 4650 53251040 1175 1400 1500 1825

4590 4890 5250 5550 63354940 5290 5700 6080 69955320 5725 6190 6660 76955735 6200 6725 7275 84606200 6720 7315 7990 93551040 1175 1400 1500 1825

Retail in EURO excl. VAT

26

EKKO 22 + 222 | Rectangular table

Top Solid wood, selection, 28 mm thicknessEdge K 79 Surface lacquered, oiled or soapedBase 2 V-legs with a visible mounting connector in steel,

optionally deep black lacquered or polished chrome-plated. (3 V-legs above a length of 360cm)

Design Wolfgang C. R. Mezger

Article Table area m² Number of V-legs

L x W x H in cm

Surface difference per m² for non-standard sizes

Max. table width for V-leg: 130 cm

E22RE220E22RE240E22RE260E22RE280E22RE300E22RE320E22RE340E222RE360E222RE380E222RE400E222RE420E222RE440E222RE460

220 x 110 x 74240 x 110 x 74260 x 110 x 74280 x 110 x 74300 x 120 x 74320 x 120 x 74340 x 120 x 74360 x 120 x 74380 x 120 x 74400 x 130 x 74420 x 130 x 74440 x 130 x 74460 x 130 x 74

2.422.642.863.083.603.844.084.324.565.205.465.725.98

2222222333333

EKKO 33 | Rectangular table

Top Solid wood, selection, 28 mm thicknessEdge K 79 Surface lacquered, oiled or soapedBase 2 x 3 part legs in steel, optionally deep black lacquered or

polished chrome-plated. Design Wolfgang C. R. Mezger

Article Table area m²L x W x H in cm

Surface difference per m² for non-standard sizes

Max. table width for 3-leg version: 140 cm

E33RE280E33RE300E33RE320E33RE340E33RE360E33RE380E33RE400E33RE420E33RE440

280 x 110 x 74300 x 120 x 74320 x 120 x 74340 x 120 x 74360 x 120 x 74380 x 120 x 74400 x 130 x 74420 x 130 x 74440 x 130 x 74

3.083.603.844.084.324.565.205.465.72

Number of legs

222222222

BeechHeartwood

BeechHeartwood

SycamoreElm | Maple

Ash

SycamoreElm | Maple

Ash

CherryOak

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

Extra charge Surface Table stained according to sample, per table and colour 255Extra charge Base Base steel lacquered according to RAL/NCS, per base and per colour 495 Base matt chrome-plated EKKO 22, per V-base 180 Base matt chrome-plated EKKO 33, per 3-base 270

4455 4840 5290 5890 69354785 5210 5715 6420 76005120 5600 6150 6980 82755480 6010 6605 7570 89956250 6880 7600 8785 105106675 7350 8130 9470 113507100 7835 8685 10190 122408465 9250 10165 11850 140658910 9760 10730 12615 150059915 10885 12020 14300 17085

10400 11445 12630 15180 1816510895 11995 13260 16075 1929011400 12565 13910 17000 204251040 1175 1400 1500 1825

6900 7440 8070 9055 105407675 8315 9060 10305 120758100 8795 9595 11000 129409160 9915 10790 12355 144709600 10415 11355 13100 15390

10050 10915 11925 13875 1634511500 12505 13675 16040 1893011995 13065 14300 16930 2002512490 13620 14935 17845 211701040 1175 1400 1500 1825

27

EKKO 44 | Rectangular table

Top Solid wood, selection, 28 mm thicknessEdge K 79 Surface lacquered, oiled or soapedBase 2 x 4 part legs in steel, optionally deep black lacquered or

polished chrome-plated. Design Wolfgang C. R. Mezger

Article Table area m²L x W x H in cm

Surface difference per m² for non-standard sizes

Max. table width with 4-leg version: 160 cm

E44RE340E44RE360E44RE380E44RE400E44RE420E44RE440E44RE460E44RE480E44RE500

340 x 130 x 74360 x 130 x 74380 x 130 x 74400 x 140 x 74420 x 140 x 74440 x 140 x 74460 x 140 x 74480 x 140 x 74500 x 150 x 74

4.424.684.945.605.886.166.446.727.50

EKKO 3 | Round table

Top Solid wood, selection, 28 mm thicknessEdge K 79 Surface lacquered, oiled or soapedBase 1 x 3 part leg in steel, optionally deep black lacquered or polished chrome-plated. Design Wolfgang C. R. Mezger

Maximum diameter: 130 cm

Article Table area m² x H in cm

Surface difference per m² for non-standard sizes

E3RD100E3RD110E3RD120E3RD130

1.001.211.441.69

100 x 74 110 x 74 120 x 74 130 x 74

EKKO 4 | Round table

Top Solid wood, selection, 28 mm thicknessEdge K 79Surface lacquered, oiled or soapedBase 1 x 4 part leg in steel, optionally deep black lacquered or polished chrome-plated. Design Wolfgang C. R. Mezger

Maximum diameter: 180 cm

Article Table area m² x H in cm

Surface difference per m² for non-standard sizes

E4RD140E4RD150E4RD160E4RD170E4RD180

1.962.252.562.893.24

140 x 74 150 x 74 160 x 74 170 x 74 180 x 74

Number of legs

222222222

BeechHeartwood

SycamoreElm | Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

BeechHeartwood

SycamoreElm | Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

BeechHeartwood

SycamoreElm | Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

Extra charge Surface Table stained according to sample, per table and colour 255Extra charge Base Base steel lacquered according to RAL/NCS, per base and per colour 495 Base matt chrome-plated EKKO 33, per 3-base 270 Base matt chrome-plated EKKO 44 per 4-base 355

9875 10685 11635 13325 1562011005 11880 12905 14800 1728011485 12425 13515 15635 1831513305 14385 15640 18195 2129013835 14985 16315 19150 2248514365 15585 17000 20135 2370014910 16205 17700 21150 2496015445 16805 18380 22200 2625016730 18255 20035 24555 291801040 1175 1400 1500 1825

2685 2840 3020 3180 35752930 3125 3345 3525 40103195 3425 3690 3910 44853830 4090 4395 4650 53251040 1175 1400 1500 1825

4590 4890 5250 5550 63354940 5290 5700 6080 69955320 5725 6190 6660 76955735 6200 6725 7275 84606200 6720 7315 7990 93551040 1175 1400 1500 1825

Retail in EURO excl. VAT

28

EKKO Options

ESTWAESTWABESTWRGESTWMLSTL

1 item1 item1 item1 item

EKKO Power outled box (for Round tables)Cover in the same wood as top.Including 3 m connecting cable

12ERDERDSERDSK

1 item1 item1 item

Box with wooden lid, no socketsBox with wooden lid, only powerBox with wooden lid, power, USB, RJ45

on demand

STWA1STWAB1STWRG1STWML1STL

1 item1 item1 item1 item

Lid in aluminium brushed with natural anodised finishLid in aluminium brushed with bronze or black anodised finish Lid in oiled untreated steel or chromium-platedLid in solid wood or leather black1 bar configurated as requested Lid only, WITHOUT box and sockets, reduced price

on demand

EKKO Cable channel (vertical)Fixed magnets along the leg. Acts as a cable guide and cover.

EKV Metal black painted or polished chrome-palted 1 item

KK6 X x 6 x 3 1 setperforated black sheet metal

Cable channel set (horizontal), 3 pieces, 50 cm eachAttached directly under the table top to carry cables, made from perforated black sheet metal, and is the same length as the table top, 1 set consists of 3 sections à 50 cm

Lid in aluminium brushed with natural anodised finishLid in aluminium brushed with bronze or black anodised finish Lid in oiled untreated steel or chromium-platedLid in solid wood or leather black1 bar configurated as requested

Cable channel set (horizontal)

Only for EKKO conference tables. Cut out with hinged lid in different versions. Recessed power bar holder in black finish with 4 plug-ins. Cut out size in table top approx. 25 x 12 cm.Standard configuration: 2 x power, 2 x blank per bar Exclusive connecting cable.

Power outlet box with hinged lid (one side useable)

Recommended for all conference tables for multiple media plug-ins. Cut out with hinged lin in different versions. Recessed power bar holder in black finish with 4 plug-ins. Cut out size in table top approx. 25 x 12 cm. Standard configuration: 2 x power, 2 x blankExclusive connecting cable.

340

180

870101510551075

870101510551075

–160

635810

1030

29

1 2 3 4 5 6 7

1

2

3

4

5

6

7

241.8

207.4

173.0

138.6

104.2

69

35

103

137

171 20

5

239

In-aga Shelf unit

Description Shelf unit in solid wood, 10mm thickness. All horizontal shelves, the vertical sides and back walls can be fitted as completely identical parts (without tools). Oiled surface.

Shelf depth 33 cm Planning grid At least two back wall elements have to be used for

each base and extension element. The system bore holes are visible on elements without a back wall and on horizontal elements.

Minimum element width: 3 elements Dimensions in cm

Retail in EURO excl. VAT

28

EKKO Options

ESTWAESTWABESTWRGESTWMLSTL

1 item1 item1 item1 item

EKKO Power outled box (for Round tables)Cover in the same wood as top.Including 3 m connecting cable

12ERDERDSERDSK

1 item1 item1 item

Box with wooden lid, no socketsBox with wooden lid, only powerBox with wooden lid, power, USB, RJ45

on demand

STWA1STWAB1STWRG1STWML1STL

1 item1 item1 item1 item

Lid in aluminium brushed with natural anodised finishLid in aluminium brushed with bronze or black anodised finish Lid in oiled untreated steel or chromium-platedLid in solid wood or leather black1 bar configurated as requested Lid only, WITHOUT box and sockets, reduced price

on demand

EKKO Cable channel (vertical)Fixed magnets along the leg. Acts as a cable guide and cover.

EKV Metal black painted or polished chrome-palted 1 item

KK6 X x 6 x 3 1 setperforated black sheet metal

Cable channel set (horizontal), 3 pieces, 50 cm eachAttached directly under the table top to carry cables, made from perforated black sheet metal, and is the same length as the table top, 1 set consists of 3 sections à 50 cm

Lid in aluminium brushed with natural anodised finishLid in aluminium brushed with bronze or black anodised finish Lid in oiled untreated steel or chromium-platedLid in solid wood or leather black1 bar configurated as requested

Cable channel set (horizontal)

Only for EKKO conference tables. Cut out with hinged lid in different versions. Recessed power bar holder in black finish with 4 plug-ins. Cut out size in table top approx. 25 x 12 cm.Standard configuration: 2 x power, 2 x blank per bar Exclusive connecting cable.

Power outlet box with hinged lid (one side useable)

Recommended for all conference tables for multiple media plug-ins. Cut out with hinged lin in different versions. Recessed power bar holder in black finish with 4 plug-ins. Cut out size in table top approx. 25 x 12 cm. Standard configuration: 2 x power, 2 x blankExclusive connecting cable.

340

180

870101510551075

870101510551075

–160

635810

1030

29

1 2 3 4 5 6 7

1

2

3

4

5

6

7

241.8

207.4

173.0

138.6

104.2

69

35

103

137

171 20

5

239

In-aga Shelf unit

Description Shelf unit in solid wood, 10mm thickness. All horizontal shelves, the vertical sides and back walls can be fitted as completely identical parts (without tools). Oiled surface.

Shelf depth 33 cm Planning grid At least two back wall elements have to be used for

each base and extension element. The system bore holes are visible on elements without a back wall and on horizontal elements.

Minimum element width: 3 elements Dimensions in cm

Retail in EURO excl. VAT

30

Price matrix oak

Price matrix Walnut

Price reduction

OAK Walnut

per omitted back wall element

1 2 3 4 5 6 71

2

3

4

5

6

7

1 2 3 4 5 6 71

2

3

4

5

6

7

6025 7830 9675 11495 13305

5205 6765 8355 9925 11485

4380 5695 7030 8360 9675

3555 4620 5715 6795 7860

2730 3560 4395 5220 6050

1905 2485 3075 3655 4235

1080 1415 1755 2090 2420

6440 8355 10280 12230 14125

5560 7215 8885 10560 12205

4680 6075 7475 8895 10270

3795 4935 6075 7225 8350

2915 3790 4670 5560 6420

2040 2655 3265 3895 4500

1160 1510 1865 2225 2570

-60 -65

31

MAISA Extendable table | Solid wood, Selection

Top Solid wood BV 26 selection, 26 mm thicknessExtension Has to be ordered separately (see below), can be stowed in the tableEdge Edge K 06 (long sides)

Edge K 25 (front ends)Surface lacquered, oiled or soapedBase Solid wood and surface as table topDesign Carlo Clopath

Article L x W x H in cm Table area m² Heartwood ash,

black stained

Ash Oak Black Walnut(with sapwood)

Base and top in

MAISA Extendable table | FENIX NTM (Cover)

Top Composite board, Edge MDF black, lacquered, covered with FENIX NTM, 6 colors: FENIX NTM 0029 (Weiss Bianco Malé), 0719 (Beige Luxor), 0717 (Castoro Ottawa), 0752 (Grigio Antrim), 0749 (Cacao Ornioco), 0720 (Nero Ingo)

Extension Has to be ordered separately (see below), can be stowed in the tableEdge Edge K 06 (long sides)

Edge K 25 (front ends) Lacquered, fine structure, blackBase Solid woodSurface lacquered, oiled or soapedDesign Carlo Clopath

Article L x W x H in cm Table area m² Ash Oak Black Walnutwith sapwood

Base in

MAISA Extension | Solid wood or FENIX NTM (Cover)

Top Solid wood BV 26 selection, 26 mm thickness (Wood grain in the extension piece runs crosswise) or light weight construction covered with FENIX NTM, edge MDF black, lacquered, 6 colors: FENIX NTM 0029 (Weiss Bianco Malé), 0719 (Beige Luxor), 0717 (Castoro Ottawa), 0752 (Grigio Antrim), 0749 (Cacao Ornioco), 0720 (Nero Ingo)

Edge Edge K 06 (long sides) Edge K 25 (front ends) With FENIX, lacquered, fine structure, black

Surfacesolid wood lacquered, oiled or soapedDesign Carlo Clopath

Article L x W x H in cm Table area m² Ash OakCovered with FENIX NTM

(3 colours to choose)

Heartwood ash,

black stained

Black Walnutwith sapwood

Heartwood ash,

black stained

MAI170FMAI190FMAI210F

170 x 100 x 74190 x 100 x 74210 x 100 x 74

1.701.902.10

MAI170HMAI190HMAI210H

170 x 100 x 74190 x 100 x 74210 x 100 x 74

1.701.902.10

70 x 10070 x 10070 x 10070 x 10070 x 100

MAIF70MAIH70KNSMAIH70ESMAIH70EIMAIH70SN

0.700.700.700.700.70

Extra charge for lengthwise grain, continuous wood grain pattern

Extra charge Surface Table top and base stained according to pattern or lightly oiled 255

3555 3500 3570 39203715 3660 3725 40953865 3820 3885 4270

4350 4325 4515 55854520 4515 4715 60154685 4700 4915 6485

1020 - - - -- 1170 - - -- - 1205 - -- - - 1365 -- - - - 1485

410 420 475 520

Retail in EURO excl. VAT

30

Price matrix oak

Price matrix Walnut

Price reduction

OAK Walnut

per omitted back wall element

1 2 3 4 5 6 71

2

3

4

5

6

7

1 2 3 4 5 6 71

2

3

4

5

6

7

6025 7830 9675 11495 13305

5205 6765 8355 9925 11485

4380 5695 7030 8360 9675

3555 4620 5715 6795 7860

2730 3560 4395 5220 6050

1905 2485 3075 3655 4235

1080 1415 1755 2090 2420

6440 8355 10280 12230 14125

5560 7215 8885 10560 12205

4680 6075 7475 8895 10270

3795 4935 6075 7225 8350

2915 3790 4670 5560 6420

2040 2655 3265 3895 4500

1160 1510 1865 2225 2570

-60 -65

31

MAISA Extendable table | Solid wood, Selection

Top Solid wood BV 26 selection, 26 mm thicknessExtension Has to be ordered separately (see below), can be stowed in the tableEdge Edge K 06 (long sides)

Edge K 25 (front ends)Surface lacquered, oiled or soapedBase Solid wood and surface as table topDesign Carlo Clopath

Article L x W x H in cm Table area m² Heartwood ash,

black stained

Ash Oak Black Walnut(with sapwood)

Base and top in

MAISA Extendable table | FENIX NTM (Cover)

Top Composite board, Edge MDF black, lacquered, covered with FENIX NTM, 6 colors: FENIX NTM 0029 (Weiss Bianco Malé), 0719 (Beige Luxor), 0717 (Castoro Ottawa), 0752 (Grigio Antrim), 0749 (Cacao Ornioco), 0720 (Nero Ingo)

Extension Has to be ordered separately (see below), can be stowed in the tableEdge Edge K 06 (long sides)

Edge K 25 (front ends) Lacquered, fine structure, blackBase Solid woodSurface lacquered, oiled or soapedDesign Carlo Clopath

Article L x W x H in cm Table area m² Ash Oak Black Walnutwith sapwood

Base in

MAISA Extension | Solid wood or FENIX NTM (Cover)

Top Solid wood BV 26 selection, 26 mm thickness (Wood grain in the extension piece runs crosswise) or light weight construction covered with FENIX NTM, edge MDF black, lacquered, 6 colors: FENIX NTM 0029 (Weiss Bianco Malé), 0719 (Beige Luxor), 0717 (Castoro Ottawa), 0752 (Grigio Antrim), 0749 (Cacao Ornioco), 0720 (Nero Ingo)

Edge Edge K 06 (long sides) Edge K 25 (front ends) With FENIX, lacquered, fine structure, black

Surfacesolid wood lacquered, oiled or soapedDesign Carlo Clopath

Article L x W x H in cm Table area m² Ash OakCovered with FENIX NTM

(3 colours to choose)

Heartwood ash,

black stained

Black Walnutwith sapwood

Heartwood ash,

black stained

MAI170FMAI190FMAI210F

170 x 100 x 74190 x 100 x 74210 x 100 x 74

1.701.902.10

MAI170HMAI190HMAI210H

170 x 100 x 74190 x 100 x 74210 x 100 x 74

1.701.902.10

70 x 10070 x 10070 x 10070 x 10070 x 100

MAIF70MAIH70KNSMAIH70ESMAIH70EIMAIH70SN

0.700.700.700.700.70

Extra charge for lengthwise grain, continuous wood grain pattern

Extra charge Surface Table top and base stained according to pattern or lightly oiled 255

3555 3500 3570 39203715 3660 3725 40953865 3820 3885 4270

4350 4325 4515 55854520 4515 4715 60154685 4700 4915 6485

1020 - - - -- 1170 - - -- - 1205 - -- - - 1365 -- - - - 1485

410 420 475 520

Retail in EURO excl. VAT

32

169 / 189 / 209 / 229 cm

220 / 240 / 260 / 280 cm

18

65

MAISA Table (without extension) | Solid wood, Selection

Top Solid wood BV 26 selection, 26 mm thicknessEdge Edge K 06 (long sides)

Edge K 25 (front ends)Surface lacquered, oiled or soapedBase Solid wood and surface as table topDesign Carlo Clopath

Article L x W x H in cm Table area m² Base and top in

MAISA Table (without extension) | FENIX NTM (Cover)

Top Composite board, Edge MDF black, lacquered, covered with FENIX NTM, 6 colors: FENIX NTM 0029 (Weiss Bianco Malé), 0719 (Beige Luxor), 0717 (Castoro Ottawa), 0752 (Grigio Antrim), 0749 (Cacao Ornioco), 0720 (Nero Ingo)

Edge Edge K 06 (long sides) Edge K 25 (front ends)

Lacquered, fine structure, blackBase Solid woodSurface base lacquered, oiled or soapedDesign Carlo Clopath

Article L x W x H in cm Table area m² Base in

Heartwood ash,

black stained

Ash Oak Black Walnut(with sapwood)

Ash Oak Black Walnutwith sapwood

Heartwood ash,

black stained

MAI220GHMAI240GHMAI260GHMAI280GH

220 x 100 x 74 240 x 100 x 74 260 x 100 x 74 280 x 100 x 74

2.22.42.62.8

MAI220GFMAI240GFMAI260GFMAI280GF

220 x 100 x 74 240 x 100 x 74 260 x 100 x 74 280 x 100 x 74

2.22.42.62.8

Extendable table measurements

Frame position without extension

Special dimensions on demand Extra charge surface Table top and base stained according to pattern or lightly oiled 255

4370 4335 4550 58154585 4595 4845 62554875 4930 5200 67905160 5260 5560 7330

3710 3655 3725 40653830 3775 3845 41904010 3965 4025 43954185 4130 4200 4590

33

NIK Rectangular table | Selection

Top Solid wood, BV 28 selection, 28 mm thicknessEdge Edge K 32 or K 71Surface lacquered, oiled or soapedBase 2 pair of bases in cast aluminum, painted in basic colour

(Inside textured painted, Outerside matt painted finish) Joint width: 5 mm

Design Carsten Gollnick

Articlel

NIKRE180NIKRE190NIKRE200NIKRE210NIKRE220NIKRE230NIKRE240NIKRE250NIKRE260NIKRE270NIKRE280NIKRE290NIKRE300

180 x 90 x 74190 x 90 x 74200 x 90 x 74210 x 90 x 74220 x 90 x 74230 x 90 x 74240 x 100 x 74250 x 100 x 74260 x 100 x 74270 x 100 x 74280 x 100 x 74290 x 100 x 74300 x 100 x 74

1.621.711.801.891.982.072.402.502.602.702.802.903.00

L x W x H in cm Table area m²

Surface difference per m² for non-standard sizes

Standard leg position, different leg position on request, possible without extra charge

180 to 259 cm40

260 to 300 cm50

45.6 50.6

NIK Connection

The NIK base frame is the ideal functional and visual basis for several tables to be linked together in a single line for a larger surface or conference layout..

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

90 to 99 cm 100 to 110 cm

Extra charge Surface Single-piece table top without longitudinally gaps 0 Table stained according to sample, per table and colour 255Extra charge Base Base in accent colour or according to RAL/NCS 255

3280 3550 3835 3960 48503415 3700 4005 4165 51353550 3865 4185 4360 54003700 4030 4370 4570 56753845 4195 4560 4775 59453985 4360 4745 4995 62304450 4885 5320 5640 70904615 5070 5545 5880 74304785 5270 5750 6135 77654965 5455 5970 6400 81055135 5655 6200 6655 84455310 5865 6415 6925 88055490 6055 6655 7185 91601040 1175 1400 1500 1825

Retail in EURO excl. VAT

32

169 / 189 / 209 / 229 cm

220 / 240 / 260 / 280 cm

18

65

MAISA Table (without extension) | Solid wood, Selection

Top Solid wood BV 26 selection, 26 mm thicknessEdge Edge K 06 (long sides)

Edge K 25 (front ends)Surface lacquered, oiled or soapedBase Solid wood and surface as table topDesign Carlo Clopath

Article L x W x H in cm Table area m² Base and top in

MAISA Table (without extension) | FENIX NTM (Cover)

Top Composite board, Edge MDF black, lacquered, covered with FENIX NTM, 6 colors: FENIX NTM 0029 (Weiss Bianco Malé), 0719 (Beige Luxor), 0717 (Castoro Ottawa), 0752 (Grigio Antrim), 0749 (Cacao Ornioco), 0720 (Nero Ingo)

Edge Edge K 06 (long sides) Edge K 25 (front ends)

Lacquered, fine structure, blackBase Solid woodSurface base lacquered, oiled or soapedDesign Carlo Clopath

Article L x W x H in cm Table area m² Base in

Heartwood ash,

black stained

Ash Oak Black Walnut(with sapwood)

Ash Oak Black Walnutwith sapwood

Heartwood ash,

black stained

MAI220GHMAI240GHMAI260GHMAI280GH

220 x 100 x 74 240 x 100 x 74 260 x 100 x 74 280 x 100 x 74

2.22.42.62.8

MAI220GFMAI240GFMAI260GFMAI280GF

220 x 100 x 74 240 x 100 x 74 260 x 100 x 74 280 x 100 x 74

2.22.42.62.8

Extendable table measurements

Frame position without extension

Special dimensions on demand Extra charge surface Table top and base stained according to pattern or lightly oiled 255

4370 4335 4550 58154585 4595 4845 62554875 4930 5200 67905160 5260 5560 7330

3710 3655 3725 40653830 3775 3845 41904010 3965 4025 43954185 4130 4200 4590

33

NIK Rectangular table | Selection

Top Solid wood, BV 28 selection, 28 mm thicknessEdge Edge K 32 or K 71Surface lacquered, oiled or soapedBase 2 pair of bases in cast aluminum, painted in basic colour

(Inside textured painted, Outerside matt painted finish) Joint width: 5 mm

Design Carsten Gollnick

Articlel

NIKRE180NIKRE190NIKRE200NIKRE210NIKRE220NIKRE230NIKRE240NIKRE250NIKRE260NIKRE270NIKRE280NIKRE290NIKRE300

180 x 90 x 74190 x 90 x 74200 x 90 x 74210 x 90 x 74220 x 90 x 74230 x 90 x 74240 x 100 x 74250 x 100 x 74260 x 100 x 74270 x 100 x 74280 x 100 x 74290 x 100 x 74300 x 100 x 74

1.621.711.801.891.982.072.402.502.602.702.802.903.00

L x W x H in cm Table area m²

Surface difference per m² for non-standard sizes

Standard leg position, different leg position on request, possible without extra charge

180 to 259 cm40

260 to 300 cm50

45.6 50.6

NIK Connection

The NIK base frame is the ideal functional and visual basis for several tables to be linked together in a single line for a larger surface or conference layout..

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

90 to 99 cm 100 to 110 cm

Extra charge Surface Single-piece table top without longitudinally gaps 0 Table stained according to sample, per table and colour 255Extra charge Base Base in accent colour or according to RAL/NCS 255

3280 3550 3835 3960 48503415 3700 4005 4165 51353550 3865 4185 4360 54003700 4030 4370 4570 56753845 4195 4560 4775 59453985 4360 4745 4995 62304450 4885 5320 5640 70904615 5070 5545 5880 74304785 5270 5750 6135 77654965 5455 5970 6400 81055135 5655 6200 6655 84455310 5865 6415 6925 88055490 6055 6655 7185 91601040 1175 1400 1500 1825

Retail in EURO excl. VAT

34

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

NIK Round table I Selection

Top Solid wood, BV 28 selection, 28 mm thicknessEdge Edge K 32 or K 71Surface lacquered, oiled or soapedBase 4 legs in cast aluminum with connection bar, painted in basic colour

(Inside textured painted, Outerside matt painted finish)Design Carsten Gollnick

Article

NIKRD130NIKRD140NIKRD160

130 x 74 140 x 74 160 x 74

1.691.962.56

L x W x H in cm Table area m²

Surface difference per m² for non-standard sizes

Extra charge Surface Table stained according to sample, per table and colour 255Extra charge Base Base in accent colour or according to RAL/NCS 255

3240 3490 3810 4105 48203660 3955 4325 4635 54704520 4910 5410 5820 69351040 1175 1400 1500 1825

35

Article ∅ x H in cm Table area m2 Heartwoodash

black stained

Ash Oak Black Walnut(with sapwood)

Black Walnut(without sapwood)

OSC120 120 x 74 1.44OSC130 130 x 74 1.69OSC140 140 x 74 1.96OSC150 150 x 74 2.25Surface difference per m2 for non-standard sizes

Approval photo not possible with Oscar model

OSCAR Table

Top Solid wood selection, 35 mm thicknessEdge K34Surface lacquered, oiled or soapedBase solid wood as the tabletop, brass leg end caps Design Werner/Vázquez Design Studio

3070 3145 3275 4030 42903230 3295 3455 4320 45953400 3470 3655 4650 49503515 3595 3805 4935 52451040 1175 1400 1500 1825

Retail in EURO excl. VAT

34

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

NIK Round table I Selection

Top Solid wood, BV 28 selection, 28 mm thicknessEdge Edge K 32 or K 71Surface lacquered, oiled or soapedBase 4 legs in cast aluminum with connection bar, painted in basic colour

(Inside textured painted, Outerside matt painted finish)Design Carsten Gollnick

Article

NIKRD130NIKRD140NIKRD160

130 x 74 140 x 74 160 x 74

1.691.962.56

L x W x H in cm Table area m²

Surface difference per m² for non-standard sizes

Extra charge Surface Table stained according to sample, per table and colour 255Extra charge Base Base in accent colour or according to RAL/NCS 255

3240 3490 3810 4105 48203660 3955 4325 4635 54704520 4910 5410 5820 69351040 1175 1400 1500 1825

35

Article ∅ x H in cm Table area m2 Heartwoodash

black stained

Ash Oak Black Walnut(with sapwood)

Black Walnut(without sapwood)

OSC120 120 x 74 1.44OSC130 130 x 74 1.69OSC140 140 x 74 1.96OSC150 150 x 74 2.25Surface difference per m2 for non-standard sizes

Approval photo not possible with Oscar model

OSCAR Table

Top Solid wood selection, 35 mm thicknessEdge K34Surface lacquered, oiled or soapedBase solid wood as the tabletop, brass leg end caps Design Werner/Vázquez Design Studio

3070 3145 3275 4030 42903230 3295 3455 4320 45953400 3470 3655 4650 49503515 3595 3805 4935 52451040 1175 1400 1500 1825

Retail in EURO excl. VAT

36

RAD Round table with 1 insert

Top Solid wood, selection, 28 mm thicknessEdge K 25Insert 1 or 2 inserts (solid wood) à 58 cm | must be stowed separatelySurface lacquered, oiled or soapedBase Dividable pedestal. Floor base lacquered aluminium colour,

pedestal aluminium, natural anodised, Diameter Standpipe 10 cm

Article

RAD100H1RAD113H1RAD120H1RAD130H1RAD140H1

100 x 72.5 (floor base 55)113 x 72.5 (floor base 55)120 x 72.5 (floor base 65)130 x 72.5 (floor base 65)140 x 72.5 (floor base 65)

1.581.932.142.442.77

x H in cm

Surface difference per m² for non-standard sizes

RAD Round table with 2 inserts

Top Solid wood, selection, 28 mm thickness

Article

RAD113H2RAD120H2RAD130H2RAD140H2

113 x 72.5 (floor base 55)120 x 72.5 (floor base 65)130 x 72.5 (floor base 65)140 x 72.5 (floor base 65)

2.592.833.203.58

x H in cm

Surface difference per m² for non-standard sizes

Table area m²

Table area m²

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

Extra charge Surface Table stained according to sample, per table and colour 255Extra charge Base Entire base lacquered in black 295

3495 3690 4070 4350 50503910 4140 4605 4945 58004155 4410 4920 5305 62354595 4890 5480 5920 69905145 5490 6155 6610 78151040 1175 1400 1500 1825

4835 5145 5755 6215 73555110 5460 6135 6635 78855630 6020 6790 7350 87556265 6690 7560 8140 97101040 1175 1400 1500 1825

37

ZOOM Round- | Square table

Top Solid wood, selection, 28 mm or 40 mm thicknessEdge as requestedSurface lacquered, oiled or soapedUG Central leg with round/square floor plate and

base/square pedestal, lacquered in black or aluminium colour

Selection, 28 mm thickness

Naturart, 40 mm thickness

Selection, 40 mm thickness

Article

Article

Surface difference per m² for non-standard sizes

Surface difference per m² for non-standard sizes

RD100P28RD110P28RD120P28RD130P28RD140P28RD160P28QU100P28QU110P28QU120P28QU130P28QU140P28QU160P28

RD100P40NRD110P40NRD120P40NRD130P40NRD140P40NRD160P40NQU100P40NQU110P40NQU120P40NQU130P40NQU140P40NQU160P40N

100 x 74 110 x 74 120 x 74 130 x 74 140 x 74 160 x 74100 x 100 x 74110 x 110 x 74120 x 120 x 74130 x 130 x 74140 x 140 x 74160 x 160 x 74

100 x 74 110 x 74 120 x 74 130 x 74 140 x 74 160 x 74100 x 100 x 74110 x 110 x 74120 x 120 x 74130 x 130 x 74140 x 140 x 74160 x 160 x 74

1.001.211.441.691.962.561.001.211.441.691.962.56

1.001.211.441.691.962.561.001.211.441.691.962.56

50 / 8 55 / 8 60 / 8 65 / 8 70 / 8 80 / 1060 / 860 / 870 / 870 / 880 / 890 / 10

50 / 8 55 / 8 60 / 8 65 / 8 70 / 8 80 / 1060 / 860 / 870 / 870 / 880 / 890 / 10

Table area m²

Table area m²

Floor plate, pedestal in cm

Floor plate, pedestal in cm

Surface difference per m² for non-standard sizes

L x W x H in cm

L x W x H in cm

RD100P40RD110P40RD120P40RD130P40RD140P40RD160P40QU100P40QU110P40QU120P40QU130P40QU140P40QU160P40

100 x 74 110 x 74 120 x 74 130 x 74 140 x 74 160 x 74100 x 100 x 74110 x 110 x 74120 x 120 x 74130 x 130 x 74140 x 140 x 74160 x 160 x 74

1.001.211.441.691.962.561.001.211.441.691.962.56

50 / 8 55 / 8 60 / 8 65 / 8 70 / 8 80 / 1060 / 860 / 870 / 870 / 880 / 890 / 10

Elm naturart

SycamoreOak

naturart

Walnut naturart

Article L x W x H in cm Heartwood beech

naturart

Table area m² Floor plate, pedestal in cm

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

Extra charge Surface able stained according to sample, per table and colour 255Extra charge Bases Base lacquered according to RAL/NCS 255 Pedestal in gloss chrome 75 Pedestal in matt chrome 115

2215 2370 2550 2725 31552540 2725 2970 3185 37252780 2990 3265 3515 41203175 3415 3730 4030 47453640 3925 4300 4610 54454580 4965 5465 5880 69952215 2370 2550 2725 31552540 2725 2970 3185 37252780 2990 3265 3515 41203175 3415 3730 4030 47453640 3925 4300 4610 54454580 4965 5465 5880 69951040 1175 1400 1500 1825

2370 2500 2580 29752730 2890 2980 36603095 3285 3380 43403460 3675 3785 50153790 4045 4140 56154565 4910 5245 70252370 2500 2580 29752730 2890 2980 36603095 3285 3380 43403460 3675 3785 50153790 4045 4140 56154565 4910 5245 70251040 1175 1400 1825

2565 2760 2995 3230 37852980 3225 3535 3825 45303285 3550 3905 4235 50353755 4065 4495 4875 58104330 4695 5195 5590 66755405 5795 6430 6830 79202565 2760 2995 3230 37852980 3225 3535 3825 45303285 3550 3905 4235 50353755 4065 4495 4875 58104330 4695 5195 5590 66755405 5795 6430 6830 79201040 1175 1400 1500 1825

Retail in EURO excl. VAT

36

RAD Round table with 1 insert

Top Solid wood, selection, 28 mm thicknessEdge K 25Insert 1 or 2 inserts (solid wood) à 58 cm | must be stowed separatelySurface lacquered, oiled or soapedBase Dividable pedestal. Floor base lacquered aluminium colour,

pedestal aluminium, natural anodised, Diameter Standpipe 10 cm

Article

RAD100H1RAD113H1RAD120H1RAD130H1RAD140H1

100 x 72.5 (floor base 55)113 x 72.5 (floor base 55)120 x 72.5 (floor base 65)130 x 72.5 (floor base 65)140 x 72.5 (floor base 65)

1.581.932.142.442.77

x H in cm

Surface difference per m² for non-standard sizes

RAD Round table with 2 inserts

Top Solid wood, selection, 28 mm thickness

Article

RAD113H2RAD120H2RAD130H2RAD140H2

113 x 72.5 (floor base 55)120 x 72.5 (floor base 65)130 x 72.5 (floor base 65)140 x 72.5 (floor base 65)

2.592.833.203.58

x H in cm

Surface difference per m² for non-standard sizes

Table area m²

Table area m²

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

Extra charge Surface Table stained according to sample, per table and colour 255Extra charge Base Entire base lacquered in black 295

3495 3690 4070 4350 50503910 4140 4605 4945 58004155 4410 4920 5305 62354595 4890 5480 5920 69905145 5490 6155 6610 78151040 1175 1400 1500 1825

4835 5145 5755 6215 73555110 5460 6135 6635 78855630 6020 6790 7350 87556265 6690 7560 8140 97101040 1175 1400 1500 1825

37

ZOOM Round- | Square table

Top Solid wood, selection, 28 mm or 40 mm thicknessEdge as requestedSurface lacquered, oiled or soapedUG Central leg with round/square floor plate and

base/square pedestal, lacquered in black or aluminium colour

Selection, 28 mm thickness

Naturart, 40 mm thickness

Selection, 40 mm thickness

Article

Article

Surface difference per m² for non-standard sizes

Surface difference per m² for non-standard sizes

RD100P28RD110P28RD120P28RD130P28RD140P28RD160P28QU100P28QU110P28QU120P28QU130P28QU140P28QU160P28

RD100P40NRD110P40NRD120P40NRD130P40NRD140P40NRD160P40NQU100P40NQU110P40NQU120P40NQU130P40NQU140P40NQU160P40N

100 x 74 110 x 74 120 x 74 130 x 74 140 x 74 160 x 74100 x 100 x 74110 x 110 x 74120 x 120 x 74130 x 130 x 74140 x 140 x 74160 x 160 x 74

100 x 74 110 x 74 120 x 74 130 x 74 140 x 74 160 x 74100 x 100 x 74110 x 110 x 74120 x 120 x 74130 x 130 x 74140 x 140 x 74160 x 160 x 74

1.001.211.441.691.962.561.001.211.441.691.962.56

1.001.211.441.691.962.561.001.211.441.691.962.56

50 / 8 55 / 8 60 / 8 65 / 8 70 / 8 80 / 1060 / 860 / 870 / 870 / 880 / 890 / 10

50 / 8 55 / 8 60 / 8 65 / 8 70 / 8 80 / 1060 / 860 / 870 / 870 / 880 / 890 / 10

Table area m²

Table area m²

Floor plate, pedestal in cm

Floor plate, pedestal in cm

Surface difference per m² for non-standard sizes

L x W x H in cm

L x W x H in cm

RD100P40RD110P40RD120P40RD130P40RD140P40RD160P40QU100P40QU110P40QU120P40QU130P40QU140P40QU160P40

100 x 74 110 x 74 120 x 74 130 x 74 140 x 74 160 x 74100 x 100 x 74110 x 110 x 74120 x 120 x 74130 x 130 x 74140 x 140 x 74160 x 160 x 74

1.001.211.441.691.962.561.001.211.441.691.962.56

50 / 8 55 / 8 60 / 8 65 / 8 70 / 8 80 / 1060 / 860 / 870 / 870 / 880 / 890 / 10

Elm naturart

SycamoreOak

naturart

Walnut naturart

Article L x W x H in cm Heartwood beech

naturart

Table area m² Floor plate, pedestal in cm

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

Extra charge Surface able stained according to sample, per table and colour 255Extra charge Bases Base lacquered according to RAL/NCS 255 Pedestal in gloss chrome 75 Pedestal in matt chrome 115

2215 2370 2550 2725 31552540 2725 2970 3185 37252780 2990 3265 3515 41203175 3415 3730 4030 47453640 3925 4300 4610 54454580 4965 5465 5880 69952215 2370 2550 2725 31552540 2725 2970 3185 37252780 2990 3265 3515 41203175 3415 3730 4030 47453640 3925 4300 4610 54454580 4965 5465 5880 69951040 1175 1400 1500 1825

2370 2500 2580 29752730 2890 2980 36603095 3285 3380 43403460 3675 3785 50153790 4045 4140 56154565 4910 5245 70252370 2500 2580 29752730 2890 2980 36603095 3285 3380 43403460 3675 3785 50153790 4045 4140 56154565 4910 5245 70251040 1175 1400 1825

2565 2760 2995 3230 37852980 3225 3535 3825 45303285 3550 3905 4235 50353755 4065 4495 4875 58104330 4695 5195 5590 66755405 5795 6430 6830 79202565 2760 2995 3230 37852980 3225 3535 3825 45303285 3550 3905 4235 50353755 4065 4495 4875 58104330 4695 5195 5590 66755405 5795 6430 6830 79201040 1175 1400 1500 1825

Retail in EURO excl. VAT

40

41

42

43 - 45

47

48 - 49

NE

T

Desks

Desk body / Lowboard

Side work table (height adjustable)

Storage furniture

Tops and bases

Options

40

41

42

43 - 45

47

48 - 49

NE

T

Desks

Desk body / Lowboard

Side work table (height adjustable)

Storage furniture

Tops and bases

Options

40

NEXT Office | Desks

Top Solid wood, selection, 28 mm thicknessEdge as requestedSurface lacquered, oiled or soapedBase Metal plate leg in white or deep black lacquered

1 NEXT connecting unit Design Dante Bonuccelli

Table top with 2 metal plate leg. Supported at opposite end by desk body or lowboard (see page 45 on). Option at extra charge of NEXT drawer with electric power supply instead of connecting element (see page 53)

PSE200PSE220PSE250PSE280

200 x 100 x 75220 x 115 x 75250 x 120 x 75280 x 130 x 75

2.002.533.003.64

Article L x W x H in cm Table area m²

Surface difference per m² for non-standard sizes

Segment

PSFR|L230PSFR|L250PSTR|L270PSTR|L290

230 x 90 x 75250 x 98 x 75270 x 106 x 75290 x 114 x 75

2.072.452.863.31

Sailform right | left

Surface difference per m² for non-standard sizes

PRE200PRE220PRE250PRE280

200 x 90 x 75220 x 100 x 75250 x 100 x 75280 x 110 x 75

1.802.202.503.08

Surface difference per m² for non-standard sizes

Rectangular

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

Extra charge Surfac Table stained according to sample, per table and colour 255Extra charge Base Base steel lacquered in basic or accent color or according to RAL/NCS, per base and per colour 255 Additional plate leg in deep black lacquered, per leg 225

3155 3385 3855 4225 50803690 3975 4545 5040 61054100 4435 5085 5785 70405110 5540 6390 7335 89851040 1175 1400 1505 1825

3660 4010 4410 4970 58954045 4375 5005 5700 69504795 5285 5865 6755 81155450 6030 6705 7810 94251040 1175 1400 1505 1825

3400 3665 4180 4595 55403960 4440 5090 5665 68904745 5140 5925 6760 82755870 6385 7395 8585 104451040 1175 1400 1505 1825

41

NEXT Desk body | Lowboard

Description Desk- or Lowboard bodies as individual pieces or as an attachment for the desk top. Body can be used as an integrated component of the lowboard or as an individual unit. Incl. cable access between the body and the removeable back. Covering top is always finished as one piece. Lock per element.

Body lacquered in basic colour Front solid wood or paint finishHandle white or black, chrome-plated or matt chrom-platedLocking system front panel, always on the right side Top same colour as bodyVisible back same colour as bodyDesign Dante Bonuccelli

Lowboard LBTR/LDoor unit, left or right fixedflap handle (flush) | 1 adjustable shelf

LBTR/L 58 x 65 x 65

Lowboard LBTATechnical pull-outwith 1 pull-out shelf and a lateral cut-out, left or rightflap handle (flush) | 1 adjustable shelf

LBTA 58 x 65 x 65

Korpus K64 Handle fix handle I projecting Configuration 1 Material organizer

1 A6 drawer, incl. 2 dividers, deep black laquered 1 A4 Hanging file drawer, deep black laquered incl. standard central lock and visible back

Article W x D x H in cm

NK6440 43 x 65 x 65

Body width 43 cm:

NK6460 60 x 65 x 65Body width 60 cm:

Korpus K666Handle fix handle I projectingConfiguration 1 Material organizer 1 A6 drawer, incl. 2 dividers, deep black laquered 2 A6 Drawers without partitions incl. standard central lock and visible back

NK66640 43 x 65 x 65

Body width 43 cm:

NK66660 60 x 65 x 65Body width 60 cm:

Lowboard LBRShelf unit | 1 adjustable shelf

LBR 58 x 65 x 65

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

Entire bodylacquered (Basic colour)

Pear WalnutBlack Walnut

without sapwood

Smoked oak

Black Walnutwith sapwood

Extra charge Surface Body lacquered in accent colour or according to RAL/NCS, per lowboard and per colour 255 Front stained according to sample, per drawer frame 255Options Extra charge for active ventilation element (XLE) for equipment that radiates heat 255Extra charge Locks Lock for doors, price per element 180Extra charge Drawer Drawer in solid wood | black leather 825Extra charge Handles Handles lacquered in basic or accent colour or according to RAL/NCS, per furniture and per colour 255

1890 2150 2190 2245 2290 2390

2070 2360 2400 2460 2505 2625

2225 2380 2425 2500 2535 2640

2430 2615 2660 2730 2770 2890

905 1145 1215 1375 1425 1650

1135 1500 1575 1775 1865 2050

1285 1645 1735 1935 2020 2205

Retail in EURO excl. VAT

40

NEXT Office | Desks

Top Solid wood, selection, 28 mm thicknessEdge as requestedSurface lacquered, oiled or soapedBase Metal plate leg in white or deep black lacquered

1 NEXT connecting unit Design Dante Bonuccelli

Table top with 2 metal plate leg. Supported at opposite end by desk body or lowboard (see page 45 on). Option at extra charge of NEXT drawer with electric power supply instead of connecting element (see page 53)

PSE200PSE220PSE250PSE280

200 x 100 x 75220 x 115 x 75250 x 120 x 75280 x 130 x 75

2.002.533.003.64

Article L x W x H in cm Table area m²

Surface difference per m² for non-standard sizes

Segment

PSFR|L230PSFR|L250PSTR|L270PSTR|L290

230 x 90 x 75250 x 98 x 75270 x 106 x 75290 x 114 x 75

2.072.452.863.31

Sailform right | left

Surface difference per m² for non-standard sizes

PRE200PRE220PRE250PRE280

200 x 90 x 75220 x 100 x 75250 x 100 x 75280 x 110 x 75

1.802.202.503.08

Surface difference per m² for non-standard sizes

Rectangular

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

Extra charge Surfac Table stained according to sample, per table and colour 255Extra charge Base Base steel lacquered in basic or accent color or according to RAL/NCS, per base and per colour 255 Additional plate leg in deep black lacquered, per leg 225

3155 3385 3855 4225 50803690 3975 4545 5040 61054100 4435 5085 5785 70405110 5540 6390 7335 89851040 1175 1400 1505 1825

3660 4010 4410 4970 58954045 4375 5005 5700 69504795 5285 5865 6755 81155450 6030 6705 7810 94251040 1175 1400 1505 1825

3400 3665 4180 4595 55403960 4440 5090 5665 68904745 5140 5925 6760 82755870 6385 7395 8585 104451040 1175 1400 1505 1825

41

NEXT Desk body | Lowboard

Description Desk- or Lowboard bodies as individual pieces or as an attachment for the desk top. Body can be used as an integrated component of the lowboard or as an individual unit. Incl. cable access between the body and the removeable back. Covering top is always finished as one piece. Lock per element.

Body lacquered in basic colour Front solid wood or paint finishHandle white or black, chrome-plated or matt chrom-platedLocking system front panel, always on the right side Top same colour as bodyVisible back same colour as bodyDesign Dante Bonuccelli

Lowboard LBTR/LDoor unit, left or right fixedflap handle (flush) | 1 adjustable shelf

LBTR/L 58 x 65 x 65

Lowboard LBTATechnical pull-outwith 1 pull-out shelf and a lateral cut-out, left or rightflap handle (flush) | 1 adjustable shelf

LBTA 58 x 65 x 65

Korpus K64 Handle fix handle I projecting Configuration 1 Material organizer

1 A6 drawer, incl. 2 dividers, deep black laquered 1 A4 Hanging file drawer, deep black laquered incl. standard central lock and visible back

Article W x D x H in cm

NK6440 43 x 65 x 65

Body width 43 cm:

NK6460 60 x 65 x 65Body width 60 cm:

Korpus K666Handle fix handle I projectingConfiguration 1 Material organizer 1 A6 drawer, incl. 2 dividers, deep black laquered 2 A6 Drawers without partitions incl. standard central lock and visible back

NK66640 43 x 65 x 65

Body width 43 cm:

NK66660 60 x 65 x 65Body width 60 cm:

Lowboard LBRShelf unit | 1 adjustable shelf

LBR 58 x 65 x 65

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

Entire bodylacquered (Basic colour)

Pear WalnutBlack Walnut

without sapwood

Smoked oak

Black Walnutwith sapwood

Extra charge Surface Body lacquered in accent colour or according to RAL/NCS, per lowboard and per colour 255 Front stained according to sample, per drawer frame 255Options Extra charge for active ventilation element (XLE) for equipment that radiates heat 255Extra charge Locks Lock for doors, price per element 180Extra charge Drawer Drawer in solid wood | black leather 825Extra charge Handles Handles lacquered in basic or accent colour or according to RAL/NCS, per furniture and per colour 255

1890 2150 2190 2245 2290 2390

2070 2360 2400 2460 2505 2625

2225 2380 2425 2500 2535 2640

2430 2615 2660 2730 2770 2890

905 1145 1215 1375 1425 1650

1135 1500 1575 1775 1865 2050

1285 1645 1735 1935 2020 2205

Retail in EURO excl. VAT

42

NEXT Side work table (height adjustable)

Body acquered in basic colour Width of the body 60 cmInternal partitions Configuration, see on page 45Front Solid wood Edge K60, K63 or K79Handle white or black, chrome-plated or matt chrom-platedLocking System front panel, always at right Top solid wood, selection, 28 mm thicknessSurface lacquered, oiled or soapedFloor plate in steel, black or whiteVisible back lacquered in basic colourDesign Dante Bonuccelli

Article L x W x H (work area) in cm

Side work table with desk body K64

NNA13064NNA14064NNA15064

130 x 70 x 73-113140 x 70 x 73-113150 x 70 x 73-113

Side work table with desk body K666NNA130666NNA140666NNA150666

130 x 70 x 73-113140 x 70 x 73-113150 x 70 x 73-113

Reduced price for front in MDF, with basic colour paint finish Reduced price with body width 43 cm (instead of 60 cm)

Reduced price for front in MDF, with basic colour paint finish Reduced price with body width 43 cm (instead of 60 cm)

Installing the column lift reduces the usable depth of the drawers by 16 cm

Width of the body 60 cm

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

PearBlack Walnut

with sapwood

WalnutBlack Walnut

without sapwood

Smoked oak

Extra charge Surface Body lacquered in accent colour or according to RAL/NCS, per body and per colour 255 Adjustable top stained according to sample, per top and per colour 255 Front stained according to sample, per body and colour 255Extra charge Drawer Drawer in solid wood | black leather 825Extra charge Handles Handles lacquered in basic or accent colour or according to RAL/NCS, per furniture and per colour 255

5785 5930 6190 6385 68655870 6020 6300 6490 70005950 6120 6410 6610 7155

6035 6185 6465 6645 71256120 6285 6570 6750 72506205 6375 6685 6880 7410

-155 -200 -275 -310 -415-230 -230 -230 -245 -255

-265 -300 -355 -405 -500-205 -205 -215 -210 -230

43

NEXT Board 40

Description Board NEXT, height 40 cm, available as flap and drawer unit. The units can be set together and arranged in a row as desired. Top panel is always finished as one piece. For alternative bases, see on page 51

Body lacquered in basic colour Front solid wood or paint finishFlap handle white or black, chrome-plated or matt chrom-platedTop same colour as bodyDesign Dante Bonuccelli

Flap unit Width 43 cm, 80 cmWith 1 adjustable shelf | 1 box file height | horizontal wood grain for flaps!

Article W x D x H in cm

43 x 45 x 4043 x 45 x 4043 x 45 x 4080 x 45 x 4080 x 45 x 4080 x 45 x 40

Drawer unit width 43 cm, 80 cmHorizontal wood grain for drawer front!

NB40K43P1NB40K43P2NB40K43P3NB40K80P1NB40K80P2NB40K80P32 visible sides in solid wood left | right

NB40S43P1NB40S43P2NB40S43P1NB40S80P1NB40S80P2NB40S80P32 visible sides in solid wood left | right

Price 2Price 1 Price 3

43 x 45 x 4043 x 45 x 4043 x 45 x 4080 x 45 x 4080 x 45 x 4080 x 45 x 40

Price 1 Price 2 Price 1 Price 1 Price 2 Price 3

Price 1 Price 2 Price 3 Price 1 Price 2 Price 3

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

Entire bodylacquered (Basic colour)

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

Extra charge Surface Front/top lacquered in accent colour or according to RAL/NCS, per board and per colour 255 body laquered in accent colour or according to RAL/NCS, per board and per colour 255Extra charge Locks Lock for doors, price per element 43 cm or 80 cm 365Extra charge Handles Handles lacquered in basic or accent colour or according to RAL/NCS, per furniture and per colour 255

1015 - - - - -- 1160 1235 1350 1395 1535- 1160 1235 1350 1395 1535

1350 - - - - -- 1495 1570 1695 1730 1870- 1495 1570 1695 1730 1870

405 415 425 465 525

1185 - - - - -- 1330 1405 1525 1560 1700- 1330 1405 1525 1560 1700

1535 - - - - -- 1670 1745 1870 1900 2040- 1670 1745 1870 1900 2040- 405 415 425 465 525

Retail in EURO excl. VAT

42

NEXT Side work table (height adjustable)

Body acquered in basic colour Width of the body 60 cmInternal partitions Configuration, see on page 45Front Solid wood Edge K60, K63 or K79Handle white or black, chrome-plated or matt chrom-platedLocking System front panel, always at right Top solid wood, selection, 28 mm thicknessSurface lacquered, oiled or soapedFloor plate in steel, black or whiteVisible back lacquered in basic colourDesign Dante Bonuccelli

Article L x W x H (work area) in cm

Side work table with desk body K64

NNA13064NNA14064NNA15064

130 x 70 x 73-113140 x 70 x 73-113150 x 70 x 73-113

Side work table with desk body K666NNA130666NNA140666NNA150666

130 x 70 x 73-113140 x 70 x 73-113150 x 70 x 73-113

Reduced price for front in MDF, with basic colour paint finish Reduced price with body width 43 cm (instead of 60 cm)

Reduced price for front in MDF, with basic colour paint finish Reduced price with body width 43 cm (instead of 60 cm)

Installing the column lift reduces the usable depth of the drawers by 16 cm

Width of the body 60 cm

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

PearBlack Walnut

with sapwood

WalnutBlack Walnut

without sapwood

Smoked oak

Extra charge Surface Body lacquered in accent colour or according to RAL/NCS, per body and per colour 255 Adjustable top stained according to sample, per top and per colour 255 Front stained according to sample, per body and colour 255Extra charge Drawer Drawer in solid wood | black leather 825Extra charge Handles Handles lacquered in basic or accent colour or according to RAL/NCS, per furniture and per colour 255

5785 5930 6190 6385 68655870 6020 6300 6490 70005950 6120 6410 6610 7155

6035 6185 6465 6645 71256120 6285 6570 6750 72506205 6375 6685 6880 7410

-155 -200 -275 -310 -415-230 -230 -230 -245 -255

-265 -300 -355 -405 -500-205 -205 -215 -210 -230

43

NEXT Board 40

Description Board NEXT, height 40 cm, available as flap and drawer unit. The units can be set together and arranged in a row as desired. Top panel is always finished as one piece. For alternative bases, see on page 51

Body lacquered in basic colour Front solid wood or paint finishFlap handle white or black, chrome-plated or matt chrom-platedTop same colour as bodyDesign Dante Bonuccelli

Flap unit Width 43 cm, 80 cmWith 1 adjustable shelf | 1 box file height | horizontal wood grain for flaps!

Article W x D x H in cm

43 x 45 x 4043 x 45 x 4043 x 45 x 4080 x 45 x 4080 x 45 x 4080 x 45 x 40

Drawer unit width 43 cm, 80 cmHorizontal wood grain for drawer front!

NB40K43P1NB40K43P2NB40K43P3NB40K80P1NB40K80P2NB40K80P32 visible sides in solid wood left | right

NB40S43P1NB40S43P2NB40S43P1NB40S80P1NB40S80P2NB40S80P32 visible sides in solid wood left | right

Price 2Price 1 Price 3

43 x 45 x 4043 x 45 x 4043 x 45 x 4080 x 45 x 4080 x 45 x 4080 x 45 x 40

Price 1 Price 2 Price 1 Price 1 Price 2 Price 3

Price 1 Price 2 Price 3 Price 1 Price 2 Price 3

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

Entire bodylacquered (Basic colour)

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

Extra charge Surface Front/top lacquered in accent colour or according to RAL/NCS, per board and per colour 255 body laquered in accent colour or according to RAL/NCS, per board and per colour 255Extra charge Locks Lock for doors, price per element 43 cm or 80 cm 365Extra charge Handles Handles lacquered in basic or accent colour or according to RAL/NCS, per furniture and per colour 255

1015 - - - - -- 1160 1235 1350 1395 1535- 1160 1235 1350 1395 1535

1350 - - - - -- 1495 1570 1695 1730 1870- 1495 1570 1695 1730 1870

405 415 425 465 525

1185 - - - - -- 1330 1405 1525 1560 1700- 1330 1405 1525 1560 1700

1535 - - - - -- 1670 1745 1870 1900 2040- 1670 1745 1870 1900 2040- 405 415 425 465 525

Retail in EURO excl. VAT

44

NEXT Board 65

Description Board NEXT, height 65 cm, available as door, flap and drawer unit. The units can be set together and arranged in a row as desired. Top panel is always finished as one piece. For alternative bases, see on page 51

Body lacquered in basic colour Front solid wood or paint finishFlap handle white or black, chrome-plated or matt chrom-platedTop same colour as bodyInner drawers same colour as bodyDesign Dante Bonuccelli

Door unit Width 43 cm (single door), 80 cm (double)With 1 adjustable shelf | 1 box file height | vertical wood grain for doors!

Article W x D x H in cm

2 visible sides in solid wood left | right

43 x 45 x 6543 x 45 x 6543 x 45 x 6580 x 45 x 6580 x 45 x 6580 x 45 x 65

Flap-/ Drawer unit Width 43 cm, 80 cmFlap unit with 1 adjustable shelf | 1 box file heightHorizontal wood grain for drawersand flap front!

43 x 45 x 6543 x 45 x 6543 x 45 x 6580 x 45 x 6580 x 45 x 6580 x 45 x 65

NB65T43P1NB65T43P2NB65T43P3NB65T80P1NB65T80P2NB65T80P3

NB65KS43P1NB65KS43P2NB65KS43P3NB65KS80P1NB65KS80P2NB65KS80P3

Price 2 Price 3

Price 1 Price 2 Price 3 Price 1 Price 2 Price 3

Price 1 Price 2 Price 3 Price 1 Price 2 Price 3

2 visible sides in solid wood left | right

Safety informationUnit could tip over! If two drawers are positioned one on top of the other the furniture must be secured using the wall mount supplied.

Price 1

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

Entire bodylacquered (Basic colour)

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

Extra charge Surface ront/top stained according to sample, per board and per colour 255 Body lacquered in accent colour or according to RAL/NCS, per board and per colour 255Extra charge Locks Lock for doors, price per element 180 Price per flap- or drawer unit 43 cm or 80 cm 365Extra charge Handles Handles lacquered in basic or accent colour or according to RAL/NCS, per furniture and per colour 255Options Extra charge for drawer/s instead of flap/s, price for section width 43 cm 165 Extra charge for drawer/s instead of flap/s, price for section width 80 cm 180

1620 - - - - -- 1755 1815 1930 1960 2095- 2035 2120 2255 2310 2575

2110 - - - - -- 2240 2310 2420 2455 2580- 2490 2590 2785 2840 3150- 460 525 540 610 705

1105 - - - - -- 1235 1300 1420 1445 1570- 1185 1260 1380 1420 1550

1570 - - - - -- 1710 1775 1885 1915 2045- 1800 1960 2200 2255 2495

460 525 540 610 705

45

NEXT Board 80

Description Board NEXT, height 80 cm, available as door, flap and drawer unit. The units can be set together and arranged in a row as desired. Top panel is always finished as one piece.

For alternative bases, see on page 51

Body lacquered in basic colour Froont solid wood or paint finishFlap handle white or black, chrome-plated or matt chrom-platedTop same colour as bodyInner drawers same colour as bodyDesign Dante Bonuccelli

Door unit Weidth 43 cm (single door), 80 cm (double)With 1 adjustable shelf | 2 box file heights | vertical wood grain for doors!

Article W x D x H in cm

2 visible sides in solid wood left | right

43 x 45 x 8043 x 45 x 8043 x 45 x 8080 x 45 x 8080 x 45 x 8080 x 45 x 80

Flap-/ Drawer unit Weidth 43 cm, 80 cmFlap unit with 1 adjustable shelf | 1 box file heightHorizontal wood grain for drawer and flap front!

43 x 45 x 8043 x 45 x 8043 x 45 x 8080 x 45 x 8080 x 45 x 8080 x 45 x 80

NB80T43P1NB80T43P2NB80T43P3NB80T80P1NB80T80P2NB80T80P3

NB80KS43P1NB80KS43P2NB80KS43P3NB80KS80P1NB80KS80P2NB80KS80P32 visible sides in solid wood left | right

Price 2Price 1 Price 3

Price 1 Price 2 Price 3 Price 1 Price 2 Price 3

Price 1 Price 2 Price 3 Price 1 Price 2 Price 3

Safety informationUnit could tip over! If two drawers are positioned one on top of the other the furniture must be secured using the wall mount supplied.

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

Entire bodylacquered (Basic colour)

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

Extra charge Surface Front/top stained according to sample, per board and per colour 255 body lacquered in accent colour or according to RAL/NCS, per lowboard and per colour 255Extra charge Locks Lock for doors, price per element 180 Price per flap- or drawer unit 43 cm or 80 cm 365Extra charge Handles Handles lacquered in basic or accent colour or according to RAL/NCS, per furniture and per colour 255Options Extra charge for drawer/s instead of flap/s, price for section width 43 cm 165 Extra charge for drawer/s instead of flap/s, price for section width 80 cm 180

1205 - - - - -- 1345 1420 1540 1570 1710- 1285 1365 1500 1545 1685

1710 - - - - -- 1860 1935 2050 2085 2225- 1960 2135 2385 2450 2710- 520 570 595 675 800

1755 - - - - -- 1895 1965 2085 2120 2255- 2205 2295 2445 2505 2805

2285 - - - - -- 2425 2505 2625 2660 2805- 2695 2810 3010 3075 3405- 520 570 595 675 800

Retail in EURO excl. VAT

44

NEXT Board 65

Description Board NEXT, height 65 cm, available as door, flap and drawer unit. The units can be set together and arranged in a row as desired. Top panel is always finished as one piece. For alternative bases, see on page 51

Body lacquered in basic colour Front solid wood or paint finishFlap handle white or black, chrome-plated or matt chrom-platedTop same colour as bodyInner drawers same colour as bodyDesign Dante Bonuccelli

Door unit Width 43 cm (single door), 80 cm (double)With 1 adjustable shelf | 1 box file height | vertical wood grain for doors!

Article W x D x H in cm

2 visible sides in solid wood left | right

43 x 45 x 6543 x 45 x 6543 x 45 x 6580 x 45 x 6580 x 45 x 6580 x 45 x 65

Flap-/ Drawer unit Width 43 cm, 80 cmFlap unit with 1 adjustable shelf | 1 box file heightHorizontal wood grain for drawersand flap front!

43 x 45 x 6543 x 45 x 6543 x 45 x 6580 x 45 x 6580 x 45 x 6580 x 45 x 65

NB65T43P1NB65T43P2NB65T43P3NB65T80P1NB65T80P2NB65T80P3

NB65KS43P1NB65KS43P2NB65KS43P3NB65KS80P1NB65KS80P2NB65KS80P3

Price 2 Price 3

Price 1 Price 2 Price 3 Price 1 Price 2 Price 3

Price 1 Price 2 Price 3 Price 1 Price 2 Price 3

2 visible sides in solid wood left | right

Safety informationUnit could tip over! If two drawers are positioned one on top of the other the furniture must be secured using the wall mount supplied.

Price 1

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

Entire bodylacquered (Basic colour)

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

Extra charge Surface ront/top stained according to sample, per board and per colour 255 Body lacquered in accent colour or according to RAL/NCS, per board and per colour 255Extra charge Locks Lock for doors, price per element 180 Price per flap- or drawer unit 43 cm or 80 cm 365Extra charge Handles Handles lacquered in basic or accent colour or according to RAL/NCS, per furniture and per colour 255Options Extra charge for drawer/s instead of flap/s, price for section width 43 cm 165 Extra charge for drawer/s instead of flap/s, price for section width 80 cm 180

1620 - - - - -- 1755 1815 1930 1960 2095- 2035 2120 2255 2310 2575

2110 - - - - -- 2240 2310 2420 2455 2580- 2490 2590 2785 2840 3150- 460 525 540 610 705

1105 - - - - -- 1235 1300 1420 1445 1570- 1185 1260 1380 1420 1550

1570 - - - - -- 1710 1775 1885 1915 2045- 1800 1960 2200 2255 2495

460 525 540 610 705

45

NEXT Board 80

Description Board NEXT, height 80 cm, available as door, flap and drawer unit. The units can be set together and arranged in a row as desired. Top panel is always finished as one piece.

For alternative bases, see on page 51

Body lacquered in basic colour Froont solid wood or paint finishFlap handle white or black, chrome-plated or matt chrom-platedTop same colour as bodyInner drawers same colour as bodyDesign Dante Bonuccelli

Door unit Weidth 43 cm (single door), 80 cm (double)With 1 adjustable shelf | 2 box file heights | vertical wood grain for doors!

Article W x D x H in cm

2 visible sides in solid wood left | right

43 x 45 x 8043 x 45 x 8043 x 45 x 8080 x 45 x 8080 x 45 x 8080 x 45 x 80

Flap-/ Drawer unit Weidth 43 cm, 80 cmFlap unit with 1 adjustable shelf | 1 box file heightHorizontal wood grain for drawer and flap front!

43 x 45 x 8043 x 45 x 8043 x 45 x 8080 x 45 x 8080 x 45 x 8080 x 45 x 80

NB80T43P1NB80T43P2NB80T43P3NB80T80P1NB80T80P2NB80T80P3

NB80KS43P1NB80KS43P2NB80KS43P3NB80KS80P1NB80KS80P2NB80KS80P32 visible sides in solid wood left | right

Price 2Price 1 Price 3

Price 1 Price 2 Price 3 Price 1 Price 2 Price 3

Price 1 Price 2 Price 3 Price 1 Price 2 Price 3

Safety informationUnit could tip over! If two drawers are positioned one on top of the other the furniture must be secured using the wall mount supplied.

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

Entire bodylacquered (Basic colour)

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

Extra charge Surface Front/top stained according to sample, per board and per colour 255 body lacquered in accent colour or according to RAL/NCS, per lowboard and per colour 255Extra charge Locks Lock for doors, price per element 180 Price per flap- or drawer unit 43 cm or 80 cm 365Extra charge Handles Handles lacquered in basic or accent colour or according to RAL/NCS, per furniture and per colour 255Options Extra charge for drawer/s instead of flap/s, price for section width 43 cm 165 Extra charge for drawer/s instead of flap/s, price for section width 80 cm 180

1205 - - - - -- 1345 1420 1540 1570 1710- 1285 1365 1500 1545 1685

1710 - - - - -- 1860 1935 2050 2085 2225- 1960 2135 2385 2450 2710- 520 570 595 675 800

1755 - - - - -- 1895 1965 2085 2120 2255- 2205 2295 2445 2505 2805

2285 - - - - -- 2425 2505 2625 2660 2805- 2695 2810 3010 3075 3405- 520 570 595 675 800

Retail in EURO excl. VAT

46

NEXT Cabinet 220

Description Board NEXT, height 220 cm, available as door unit. The units can be set together and arranged in a row as desired

Body in basic colour Doors paint finish (in body colour) or veneeredHandle/Lock Rotary rod lock with lock barrelDesign Dante Bonuccelli

Door unit Width 43 cm (single door), 80 cm (double)Doors veneered | Body paint finish (basic colour) | with 5 shelves | 6 box file heights

Article W x D x H in cm

43 x 45 x 22080 x 45 x 220

NS220T43NS220T80

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

Entire bodylacquered (Basic colour)

PearBlack Walnut

with sapwood

WalnutBlack Walnut

without sapwood

Smoked oak

Extra charge Surface Front stained according to sample, per furniture and per colour 255 body lacquered in accent colour or according to RAL/NCS, per furniture and per colour 255

1805 1995 2080 2255 2325 24802660 2985 3145 3495 3625 3960

47

NEXT Bases

Size depends on configuration of furniture | MDF lacquered, same colour as storage unit

Standard configuration: No plinth (blank plinth only)

Plinth frame I Height 5–20 cm

Plinth end frame I Height 15 cm

one-price MPSO

blank plinth only

NEXT Options Top

Stone top panel (Natural stone,standard range)

Upcharge per unit (in addition to price 1 or price 3)

Unit width 43Unit width 80

one-price one-price one-price

MPSOWS15MPSOWA15MPSOWASB15

2 end panel feet | steel lacquered, same colour as storage unit2 end panel feet | Aluminium natural anodised finish 2 end panel feet | Black brushed aluminium or bronze anodised

215410

0

250

415415535

Retail in EURO excl. VAT

46

NEXT Cabinet 220

Description Board NEXT, height 220 cm, available as door unit. The units can be set together and arranged in a row as desired

Body in basic colour Doors paint finish (in body colour) or veneeredHandle/Lock Rotary rod lock with lock barrelDesign Dante Bonuccelli

Door unit Width 43 cm (single door), 80 cm (double)Doors veneered | Body paint finish (basic colour) | with 5 shelves | 6 box file heights

Article W x D x H in cm

43 x 45 x 22080 x 45 x 220

NS220T43NS220T80

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

Entire bodylacquered (Basic colour)

PearBlack Walnut

with sapwood

WalnutBlack Walnut

without sapwood

Smoked oak

Extra charge Surface Front stained according to sample, per furniture and per colour 255 body lacquered in accent colour or according to RAL/NCS, per furniture and per colour 255

1805 1995 2080 2255 2325 24802660 2985 3145 3495 3625 3960

47

NEXT Bases

Size depends on configuration of furniture | MDF lacquered, same colour as storage unit

Standard configuration: No plinth (blank plinth only)

Plinth frame I Height 5–20 cm

Plinth end frame I Height 15 cm

one-price MPSO

blank plinth only

NEXT Options Top

Stone top panel (Natural stone,standard range)

Upcharge per unit (in addition to price 1 or price 3)

Unit width 43Unit width 80

one-price one-price one-price

MPSOWS15MPSOWA15MPSOWASB15

2 end panel feet | steel lacquered, same colour as storage unit2 end panel feet | Aluminium natural anodised finish 2 end panel feet | Black brushed aluminium or bronze anodised

215410

0

250

415415535

Retail in EURO excl. VAT

48

NEXT Board | Options

Visible backs

Painted shelf(price added or deducted)

Unit width 43 cmUnit width 80 cm

1 item1 item

Painted pull-out shelf(single pull-out action)

Unit width 43 cmUnit width 80 cm

1 item1 item

A4 suspended file(insert only, not incl. drawer)for compartment width 43 cm: 1 insert per drawer is possible for compartment width 80 cm: 2 inserts per drawer is possible

metal black, as insert for internal drawer/front drawer 1 item

NFA

NAZFA

NHR

Width 43 cm/Width 80 cm

Inner drawerVersion: Fully lacquered in body colourInner Drawers (behind doors) individually mounted (pre-drilled holes) 1 item

Unit width 43 cm

Unit width 80 cm

1 item

1 item

NIS43

NIS80

for Board 40 up to 1 are possible per compartment heightfor Board 65 up to 3 are possible per compartment heightfor Board 80 up to 4 are possible per compartment heightfor Board 40 up to 1 are possible per compartment heightfor Board 65 up to 3 are possible per compartment heightfor Board 80 up to 4 are possible per compartment height

on demand

6590

300335

110

310

345

49

NEXT Options

ZOOMELB1STL

42 x 30 x 71 bar configurated as requested

Connecting unit Fixed connection between body and table top in MDF aluminium coloured or black finish, incl. hidden cable channel through body and under the table top.This element is only possible as an addition to the NEXT desk (page 44

NXAB MDF aluminium coloured or black finish 1 item

Black leather desk blotter

LPRE 70 x 45

Cut out for cable Milled sidewise (in direction of the grain!), with cover in aluminium black or white lacquered and polished chrome-plated or matt chrome-plated. While using the cut out, only edges K60, K63 or K79 are available.

16 x 1.4 x 2.8

Cable Channel Set (horizontal)Attached directly under the table top to carry cables, made from perforated black sheet, and is the same length as the table top, 1 set consists of 3 sections à 50 cm.

NEXT Cable channel (vertical)Is fixed to the NEXT plate leg via a magnetic connection. Acts as a cable channel and cable cover.Version: Steel lacquered as the base

KK6

NKKV

X x 6 x 3

69 x 8 x 4

1 Setperforated black sheet metal

Stahlblech lackiert wie Scheibenfuss

black or white lacquered or polished chrome-plated, matt chrome-plated

Cable shoe Is attached to the table edge and holds and also conceals cables. Attention: While using the cable shoe, only edges K60, K63 or K79 are available.

NXKS

KDS

20 x 10 x 10 black or white lacquered or polished chrome-plated, matt chrome-plated

on demand

NEXT Electrical boxOnly useable in combination with NEXT Lowboard and desk body. The box acts as a connecting unit between the lowboard and the table top. The electrical wiring passes through the body. The box contains 3 cut-outs or 1 power bar for the wiring. Standard configuration: 2 x power, 1 x blank. Incl. power cable 3 m, exclusive connecting cable.This price is an extra charge and therefore only applies for this additional unit in the combination.

525

395

180

0

750

415

435

Retail in EURO excl. VAT

48

NEXT Board | Options

Visible backs

Painted shelf(price added or deducted)

Unit width 43 cmUnit width 80 cm

1 item1 item

Painted pull-out shelf(single pull-out action)

Unit width 43 cmUnit width 80 cm

1 item1 item

A4 suspended file(insert only, not incl. drawer)for compartment width 43 cm: 1 insert per drawer is possible for compartment width 80 cm: 2 inserts per drawer is possible

metal black, as insert for internal drawer/front drawer 1 item

NFA

NAZFA

NHR

Width 43 cm/Width 80 cm

Inner drawerVersion: Fully lacquered in body colourInner Drawers (behind doors) individually mounted (pre-drilled holes) 1 item

Unit width 43 cm

Unit width 80 cm

1 item

1 item

NIS43

NIS80

for Board 40 up to 1 are possible per compartment heightfor Board 65 up to 3 are possible per compartment heightfor Board 80 up to 4 are possible per compartment heightfor Board 40 up to 1 are possible per compartment heightfor Board 65 up to 3 are possible per compartment heightfor Board 80 up to 4 are possible per compartment height

on demand

6590

300335

110

310

345

49

NEXT Options

ZOOMELB1STL

42 x 30 x 71 bar configurated as requested

Connecting unit Fixed connection between body and table top in MDF aluminium coloured or black finish, incl. hidden cable channel through body and under the table top.This element is only possible as an addition to the NEXT desk (page 44

NXAB MDF aluminium coloured or black finish 1 item

Black leather desk blotter

LPRE 70 x 45

Cut out for cable Milled sidewise (in direction of the grain!), with cover in aluminium black or white lacquered and polished chrome-plated or matt chrome-plated. While using the cut out, only edges K60, K63 or K79 are available.

16 x 1.4 x 2.8

Cable Channel Set (horizontal)Attached directly under the table top to carry cables, made from perforated black sheet, and is the same length as the table top, 1 set consists of 3 sections à 50 cm.

NEXT Cable channel (vertical)Is fixed to the NEXT plate leg via a magnetic connection. Acts as a cable channel and cable cover.Version: Steel lacquered as the base

KK6

NKKV

X x 6 x 3

69 x 8 x 4

1 Setperforated black sheet metal

Stahlblech lackiert wie Scheibenfuss

black or white lacquered or polished chrome-plated, matt chrome-plated

Cable shoe Is attached to the table edge and holds and also conceals cables. Attention: While using the cable shoe, only edges K60, K63 or K79 are available.

NXKS

KDS

20 x 10 x 10 black or white lacquered or polished chrome-plated, matt chrome-plated

on demand

NEXT Electrical boxOnly useable in combination with NEXT Lowboard and desk body. The box acts as a connecting unit between the lowboard and the table top. The electrical wiring passes through the body. The box contains 3 cut-outs or 1 power bar for the wiring. Standard configuration: 2 x power, 1 x blank. Incl. power cable 3 m, exclusive connecting cable.This price is an extra charge and therefore only applies for this additional unit in the combination.

525

395

180

0

750

415

435

Retail in EURO excl. VAT

52 - 53

54

55

56

57

58

59

59

60

60

61

62 - 63

64 - 68

69 - 73

TI

Rectangular table

Conference table

Overview of connecting bars / side panel widths

Round Table

Bench

Office combination

Individual work station (height adjustable)

Individual tables for combinations

Height adjustable desk unit / stand alone

Side work station (height adjustable)

Desk body

Lowboard

Storage furniture

Options

52 - 53

54

55

56

57

58

59

59

60

60

61

62 - 63

64 - 68

69 - 73TI

Rectangular table

Conference table

Overview of connecting bars / side panel widths

Round Table

Bench

Office combination

Individual work station (height adjustable)

Individual tables for combinations

Height adjustable desk unit / stand alone

Side work station (height adjustable)

Desk body

Lowboard

Storage furniture

Options

52

Surface difference per m² for non-standard sizes

TIX Rectangular | naturart | aluminium

Top Solid wood naturart, 40 mm thickness, with longitudinal centered spaceEdge K25Surface natural, oiled or soaped, cracks and knots can be black filled and sealed or

alternatively left natural Base 2 solid aluminium rectangles with a visible mounting connector,

brushed with natural anodised finish Design Dante Bonuccelli

Maximum table length 260 cm | Maximum table width 100 cm

Article L x W x H in cm

TIXNA180TIXNA190TIXNA200TIXNA210TIXNA220TIXNA230TIXNA240TIXNA250TIXNA260

180 x 90 x 75190 x 90 x 75200 x 90 x 75210 x 90 x 75220 x 90 x 75230 x 90 x 75240 x 100 x 75250 x 100 x 75260 x 100 x 75

Surface difference per m² for non-standard sizes

TIX Rectangular table | naturart | steel

Top, edge and surface: see description on the top of the pageBase 2 rectangles with visible mounting connections,

steel lacquered aluminium colour or oiled untreated steel

TIXNS180TIXNS190TIXNS200TIXNS210TIXNS220TIXNS230TIXNS240TIXNS250TIXNS260TIXNS270TIXNS280TIXNS290TIXNS300TIXNS310TIXNS320TIXNS330TIXNS340TIXNS350TIXNS360TIXNS370TIXNS380TIXNS390TIXNS400

180 x 90 x 74190 x 90 x 74200 x 90 x 74210 x 90 x 74220 x 90 x 74230 x 90 x 74240 x 100 x 74250 x 100 x 74260 x 100 x 74270 x 100 x 74280 x 100 x 74290 x 100 x 74300 x 100 x 74310 x 110 x 74320 x 110 x 74330 x 110 x 74340 x 110 x 74350 x 110 x 74360 x 110 x 74370 x 110 x 74380 x 110 x 74390 x 110 x 74400 x 110 x 74

1.621.711.801.891.982.072.402.502.602.702.802.903.003.413.523.633.743.853.964.074.184.294.40

1.621.711.801.891.982.072.402.502.60

Table area m²

Base positions, conneting bar lenghts, side panel width: see on page 59

Elmnaturart

Sycamore Oak

naturart

Heartwoodbeech

naturart

Walnut naturart

(lenght over 280 cm, please demand)

Extra charge Surface Single-piece table top (no centre joint line) 0 Table stained according to sample, per table and colour 255Extra charge Base Base steel lacquered in basic or accent colour or according to RAL or NCS, per base and per colour 485 Base in solid aluminium brushed bronze or black anodised 300 Shortened aluminium blade legs, natural anodised finish 255 Shortened steels blade legs, painted in alum. or untreated steel 495Extra charge Connecting bars Special connecting bar for lengths under 130 cm 165 Special connecting bar for lengths over 160 cm 285

3710 3940 4045 53603845 4090 4185 56403985 4245 4340 59104100 4370 4470 61854245 4520 4630 64654350 4660 4770 67454805 5175 5280 76354940 5310 5415 79655135 5530 5630 83051040 1175 1400 1825

3195 3420 3555 48453330 3565 3695 51253485 3710 3845 54053580 3845 3980 56653725 4000 4125 59603845 4130 4265 62354310 4650 4780 71254440 4790 4925 74504635 5000 5130 78704835 5225 5355 83055040 5455 5585 87505210 5650 5780 92105390 5850 5980 96756230 6745 7340 114306645 7195 7815 123356880 7445 8095 131057340 7960 8645 141607740 8395 9125 151208195 8900 9690 161158625 9365 10190 171559115 9905 10775 182409560 10390 11315 19375

10080 10960 11950 205351040 1175 1400 1825

53

TIX Rectangular table | Selection | aluminium

Top Solid wood, selection, 40 mm thickness, with longitudinal centered spaceEdge K25Surface lacquered, oiled or soaped Base 2 solid aluminium rectangles with a visible mounting connector,

brushed with natural anodised finish Design Dante Bonuccelli

Maximum Table length 260 cm | Maximum Table width 100 cm

Article L x W x H in cm

TIXWA180TIXWA190TIXWA200TIXWA210TIXWA220TIXWA230TIXWA240TIXWA250TIXWA260

180 x 90 x 75190 x 90 x 75200 x 90 x 75210 x 90 x 75220 x 90 x 75230 x 90 x 75240 x 100 x 75250 x 100 x 75260 x 100 x 75

Surface difference per m² for non-standard sizes

1.621.711.801.891.982.072.402.502.60

Table area m²

TIX Rectangular table | Selection | steel

Top, edge and surface: see description on the top of the pageBase 2 rectangles with visible mounting connections,

steel lacquered aluminium colour, or oiled untreated steel

Surface difference per m² for non-standard sizes

Base positions, conneting bar lenghts, side panel width: see on page 59

TIXWS180TIXWS190TIXWS200TIXWS210TIXWS220TIXWS230TIXWS240TIXWS250TIXWS260TIXWS270TIXWS280TIXWS290TIXWS300TIXWS310TIXWS320TIXWS330TIXWS340TIXWS350TIXWS360TIXWS370TIXWS380TIXWS390TIXWS400

180 x 90 x 74190 x 90 x 74200 x 90 x 74210 x 90 x 74220 x 90 x 74230 x 90 x 74240 x 100 x 74250 x 100 x 74260 x 100 x 74270 x 100 x 74280 x 100 x 74290 x 100 x 74300 x 100 x 74310 x 110 x 74320 x 110 x 74330 x 110 x 74340 x 110 x 74350 x 110 x 74360 x 110 x 74370 x 110 x 74380 x 110 x 74390 x 110 x 74400 x 110 x 74

1.621.711.801.891.982.072.402.502.602.702.802.903.003.413.523.633.743.853.964.074.184.294.40

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

Extra charge Surface Single-piece table top (no centre joint line) 0 Table stained according to sample, per table and colour 255Extra charge Base Base steel laquered in basic or accent colour or according to RAL or NCS, per base and per colour 485 Base in solid aluminium brushed bronze or black anodised 300 Shortened aluminium blade legs, natural anodised finish 255 Shortened steels blade legs, painted in alum. or untreated steel 495Extra charge Connecting bars Special connecting bar for lengths under 130 cm 165 Special connecting bar for lengths over 160 cm 285

3940 4340 4765 5270 61404100 4510 4970 5540 64854245 4685 5180 5805 68154410 4860 5390 6070 71404565 5055 5600 6340 74804725 5240 5815 6615 78305240 5850 6510 7495 89105415 6060 6760 7805 93105605 6265 7020 8130 97201040 1175 1400 1500 1825

3430 3810 4245 4750 56403570 3970 4440 5010 59803725 4155 4650 5275 63153875 4330 4860 5540 66404045 4510 5075 5815 69954195 4695 5290 6090 73354725 5305 5995 6960 84104950 5580 6295 7355 89055195 5850 6615 7765 95105275 5960 6745 7945 98405465 6180 7010 8330 103655660 6405 7275 8720 109255860 6640 7530 9130 115006780 7675 8715 10585 133157195 8120 9220 11205 135307465 8430 9565 11685 141257720 8745 9925 12165 147408005 9060 10305 12680 153708290 9390 10680 13190 159958570 9720 11065 13715 166608855 10050 11435 14255 173259135 10375 11815 14810 180109425 10715 12210 15370 187001040 1175 1400 1500 1825

Retail in EURO excl. VAT

52

Surface difference per m² for non-standard sizes

TIX Rectangular | naturart | aluminium

Top Solid wood naturart, 40 mm thickness, with longitudinal centered spaceEdge K25Surface natural, oiled or soaped, cracks and knots can be black filled and sealed or

alternatively left natural Base 2 solid aluminium rectangles with a visible mounting connector,

brushed with natural anodised finish Design Dante Bonuccelli

Maximum table length 260 cm | Maximum table width 100 cm

Article L x W x H in cm

TIXNA180TIXNA190TIXNA200TIXNA210TIXNA220TIXNA230TIXNA240TIXNA250TIXNA260

180 x 90 x 75190 x 90 x 75200 x 90 x 75210 x 90 x 75220 x 90 x 75230 x 90 x 75240 x 100 x 75250 x 100 x 75260 x 100 x 75

Surface difference per m² for non-standard sizes

TIX Rectangular table | naturart | steel

Top, edge and surface: see description on the top of the pageBase 2 rectangles with visible mounting connections,

steel lacquered aluminium colour or oiled untreated steel

TIXNS180TIXNS190TIXNS200TIXNS210TIXNS220TIXNS230TIXNS240TIXNS250TIXNS260TIXNS270TIXNS280TIXNS290TIXNS300TIXNS310TIXNS320TIXNS330TIXNS340TIXNS350TIXNS360TIXNS370TIXNS380TIXNS390TIXNS400

180 x 90 x 74190 x 90 x 74200 x 90 x 74210 x 90 x 74220 x 90 x 74230 x 90 x 74240 x 100 x 74250 x 100 x 74260 x 100 x 74270 x 100 x 74280 x 100 x 74290 x 100 x 74300 x 100 x 74310 x 110 x 74320 x 110 x 74330 x 110 x 74340 x 110 x 74350 x 110 x 74360 x 110 x 74370 x 110 x 74380 x 110 x 74390 x 110 x 74400 x 110 x 74

1.621.711.801.891.982.072.402.502.602.702.802.903.003.413.523.633.743.853.964.074.184.294.40

1.621.711.801.891.982.072.402.502.60

Table area m²

Base positions, conneting bar lenghts, side panel width: see on page 59

Elmnaturart

Sycamore Oak

naturart

Heartwoodbeech

naturart

Walnut naturart

(lenght over 280 cm, please demand)

Extra charge Surface Single-piece table top (no centre joint line) 0 Table stained according to sample, per table and colour 255Extra charge Base Base steel lacquered in basic or accent colour or according to RAL or NCS, per base and per colour 485 Base in solid aluminium brushed bronze or black anodised 300 Shortened aluminium blade legs, natural anodised finish 255 Shortened steels blade legs, painted in alum. or untreated steel 495Extra charge Connecting bars Special connecting bar for lengths under 130 cm 165 Special connecting bar for lengths over 160 cm 285

3710 3940 4045 53603845 4090 4185 56403985 4245 4340 59104100 4370 4470 61854245 4520 4630 64654350 4660 4770 67454805 5175 5280 76354940 5310 5415 79655135 5530 5630 83051040 1175 1400 1825

3195 3420 3555 48453330 3565 3695 51253485 3710 3845 54053580 3845 3980 56653725 4000 4125 59603845 4130 4265 62354310 4650 4780 71254440 4790 4925 74504635 5000 5130 78704835 5225 5355 83055040 5455 5585 87505210 5650 5780 92105390 5850 5980 96756230 6745 7340 114306645 7195 7815 123356880 7445 8095 131057340 7960 8645 141607740 8395 9125 151208195 8900 9690 161158625 9365 10190 171559115 9905 10775 182409560 10390 11315 19375

10080 10960 11950 205351040 1175 1400 1825

53

TIX Rectangular table | Selection | aluminium

Top Solid wood, selection, 40 mm thickness, with longitudinal centered spaceEdge K25Surface lacquered, oiled or soaped Base 2 solid aluminium rectangles with a visible mounting connector,

brushed with natural anodised finish Design Dante Bonuccelli

Maximum Table length 260 cm | Maximum Table width 100 cm

Article L x W x H in cm

TIXWA180TIXWA190TIXWA200TIXWA210TIXWA220TIXWA230TIXWA240TIXWA250TIXWA260

180 x 90 x 75190 x 90 x 75200 x 90 x 75210 x 90 x 75220 x 90 x 75230 x 90 x 75240 x 100 x 75250 x 100 x 75260 x 100 x 75

Surface difference per m² for non-standard sizes

1.621.711.801.891.982.072.402.502.60

Table area m²

TIX Rectangular table | Selection | steel

Top, edge and surface: see description on the top of the pageBase 2 rectangles with visible mounting connections,

steel lacquered aluminium colour, or oiled untreated steel

Surface difference per m² for non-standard sizes

Base positions, conneting bar lenghts, side panel width: see on page 59

TIXWS180TIXWS190TIXWS200TIXWS210TIXWS220TIXWS230TIXWS240TIXWS250TIXWS260TIXWS270TIXWS280TIXWS290TIXWS300TIXWS310TIXWS320TIXWS330TIXWS340TIXWS350TIXWS360TIXWS370TIXWS380TIXWS390TIXWS400

180 x 90 x 74190 x 90 x 74200 x 90 x 74210 x 90 x 74220 x 90 x 74230 x 90 x 74240 x 100 x 74250 x 100 x 74260 x 100 x 74270 x 100 x 74280 x 100 x 74290 x 100 x 74300 x 100 x 74310 x 110 x 74320 x 110 x 74330 x 110 x 74340 x 110 x 74350 x 110 x 74360 x 110 x 74370 x 110 x 74380 x 110 x 74390 x 110 x 74400 x 110 x 74

1.621.711.801.891.982.072.402.502.602.702.802.903.003.413.523.633.743.853.964.074.184.294.40

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

Extra charge Surface Single-piece table top (no centre joint line) 0 Table stained according to sample, per table and colour 255Extra charge Base Base steel laquered in basic or accent colour or according to RAL or NCS, per base and per colour 485 Base in solid aluminium brushed bronze or black anodised 300 Shortened aluminium blade legs, natural anodised finish 255 Shortened steels blade legs, painted in alum. or untreated steel 495Extra charge Connecting bars Special connecting bar for lengths under 130 cm 165 Special connecting bar for lengths over 160 cm 285

3940 4340 4765 5270 61404100 4510 4970 5540 64854245 4685 5180 5805 68154410 4860 5390 6070 71404565 5055 5600 6340 74804725 5240 5815 6615 78305240 5850 6510 7495 89105415 6060 6760 7805 93105605 6265 7020 8130 97201040 1175 1400 1500 1825

3430 3810 4245 4750 56403570 3970 4440 5010 59803725 4155 4650 5275 63153875 4330 4860 5540 66404045 4510 5075 5815 69954195 4695 5290 6090 73354725 5305 5995 6960 84104950 5580 6295 7355 89055195 5850 6615 7765 95105275 5960 6745 7945 98405465 6180 7010 8330 103655660 6405 7275 8720 109255860 6640 7530 9130 115006780 7675 8715 10585 133157195 8120 9220 11205 135307465 8430 9565 11685 141257720 8745 9925 12165 147408005 9060 10305 12680 153708290 9390 10680 13190 159958570 9720 11065 13715 166608855 10050 11435 14255 173259135 10375 11815 14810 180109425 10715 12210 15370 187001040 1175 1400 1500 1825

Retail in EURO excl. VAT

54

TIX Conference table | Selection | steel

Top Solid wood, selection, 40 mm thickness, 4-parts with lengthwise centered space and crosswise spacing

Wood grain pattern not continuousEdge K25Surface lacquered, oiled or soaped Base 2 thin rectangular outer bases and 1 doubled (in width) in

the centre, for hidden cable access, with 2 visible mounting connections. Steel in aluminium-colour finish or untreated oiled finish

Design Dante Bonuccelli

Surface difference per m² for non-standard sizes

XCWS400XCWS420XCWS440XCWS460XCWS480XCWS500XCWS520XCWS540XCWS560XCWS580XCWS600XCWS620XCWS640XCWS660XCWS680XCWS700

400 x 120 x 74 (2 x 200)420 x 120 x 74 (2 x 210)440 x 120 x 74 (2 x 220)460 x 120 x 74 (2 x 230)480 x 120 x 74 (2 x 240)500 x 120 x 74 (2 x 250)520 x 120 x 74 (2 x 260)540 x 120 x 74 (2 x 270)560 x 120 x 74 (2 x 280)580 x 120 x 74 (2 x 290)600 x 130 x 74 (2 x 300)620 x 130 x 74 (2 x 310)640 x 130 x 74 (2 x 320)660 x 130 x 74 (2 x 330)680 x 130 x 74 (2 x 340)700 x 130 x 74 (2 x 350)

4.805.045.285.525.766.006.246.486.726.967.808.068.328.588.849.10

Article L x W x H in cm Table area m²

Base positions, conneting bar lenghts, side panel width: see on page 59

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

ASV Attachable extension (TIX rectangular table)

Attachable extension in solid wood. The extension hardware is supplied with the extension piece. Recommended for table widths from 90 - 100 cm. The wood grain in the extension piece runs crosswise. Small size differences between the table top and the extension are possible.

Article

ASV40ASV40N

90 x 6090 x 60

BV 40 Selection Adapted for the naturart, 40 mm thickness

L x W in cm

Surface difference per m² for non-standard sizes

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

Extra charge Surface Single-piece table top (no centre joint line) on demand Table stained according to sample, per table and colour 415Extra charge Base Base steel laquered in basic or accent colour or according to RAL or NCS, per base and per colour 820Option Solid wood with natural features (Naturart) 0 Continuous wood grain pattern on demand

10575 11755 12930 14690 1737010910 12140 13385 15325 1818511315 12600 13930 15975 1899511815 13155 14540 16920 2013512220 13635 15110 17590 2099012730 14190 15735 18435 2201513240 14780 16415 19280 2304513750 15380 17120 20115 2411014280 15995 17840 21120 2538014725 16515 18450 22165 2668516260 18270 20470 24970 3017516660 18725 21010 25655 3103517170 19310 21695 26515 3211517565 19775 22235 27385 3321018085 20375 22945 28445 3454018650 21015 23645 29700 36070

1040 1175 1400 1500 1825

1330 1415 1550 1635 18501165 1245 1365 1440 16301040 1175 1400 1500 1825

55

130 cm 140 cm 160 cm

180 cm 200 cm

43 cm 50 cm 60 cm

Items for base frames and mounting connections (in aluminium and steel)

Non-Standard lengths of mounting connections available to special order

from 180 to 240 cm from 241 to 279 cm from 280 to 300 cm

Base position and connecting bar lengths

from 301 to 339 cm from 340 to 369 cm

from length 370 to 390 cm: 220 cm from length 400 to 430 cm: 2 x 135 cm from length 440 to 470 cm: 2 x 145 cmfrom length 480 to 510 cm: 2 x 160 cm from length 520 to 550 cm: 2 x 180 cm from length 560 to 590 cm: 2 x 200 cmfrom length 600 to 630 cm: 2 x 220 cm from length 640 to 650 cm: 2 x 230 cm from length 660 to 670 cm: 2 x 240 cmfrom length 680 to 690 cm: 2 x 250 cm from length 700 to 710 cm: 2 x 260 cm

TIX Rectangles (Please enquire for table widths above 150 cm)

width Breite 90 to 99 cm width 100 to 129 cm width 130 to 149 cm

• Aluminium brushed natural anodised • oiled untreated steel • steel lacquered aluminium colour

• Aluminium brushed natural anodised (Max. table length 260 cm | Max. table width 100 cm)

• oiled untreated steel • steel lacquered aluminium colour

• oiled untreated steel • steel lacquered aluminium colour

TIX Connecting bar lengths

Retail in EURO excl. VAT

54

TIX Conference table | Selection | steel

Top Solid wood, selection, 40 mm thickness, 4-parts with lengthwise centered space and crosswise spacing

Wood grain pattern not continuousEdge K25Surface lacquered, oiled or soaped Base 2 thin rectangular outer bases and 1 doubled (in width) in

the centre, for hidden cable access, with 2 visible mounting connections. Steel in aluminium-colour finish or untreated oiled finish

Design Dante Bonuccelli

Surface difference per m² for non-standard sizes

XCWS400XCWS420XCWS440XCWS460XCWS480XCWS500XCWS520XCWS540XCWS560XCWS580XCWS600XCWS620XCWS640XCWS660XCWS680XCWS700

400 x 120 x 74 (2 x 200)420 x 120 x 74 (2 x 210)440 x 120 x 74 (2 x 220)460 x 120 x 74 (2 x 230)480 x 120 x 74 (2 x 240)500 x 120 x 74 (2 x 250)520 x 120 x 74 (2 x 260)540 x 120 x 74 (2 x 270)560 x 120 x 74 (2 x 280)580 x 120 x 74 (2 x 290)600 x 130 x 74 (2 x 300)620 x 130 x 74 (2 x 310)640 x 130 x 74 (2 x 320)660 x 130 x 74 (2 x 330)680 x 130 x 74 (2 x 340)700 x 130 x 74 (2 x 350)

4.805.045.285.525.766.006.246.486.726.967.808.068.328.588.849.10

Article L x W x H in cm Table area m²

Base positions, conneting bar lenghts, side panel width: see on page 59

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

ASV Attachable extension (TIX rectangular table)

Attachable extension in solid wood. The extension hardware is supplied with the extension piece. Recommended for table widths from 90 - 100 cm. The wood grain in the extension piece runs crosswise. Small size differences between the table top and the extension are possible.

Article

ASV40ASV40N

90 x 6090 x 60

BV 40 Selection Adapted for the naturart, 40 mm thickness

L x W in cm

Surface difference per m² for non-standard sizes

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

Extra charge Surface Single-piece table top (no centre joint line) on demand Table stained according to sample, per table and colour 415Extra charge Base Base steel laquered in basic or accent colour or according to RAL or NCS, per base and per colour 820Option Solid wood with natural features (Naturart) 0 Continuous wood grain pattern on demand

10575 11755 12930 14690 1737010910 12140 13385 15325 1818511315 12600 13930 15975 1899511815 13155 14540 16920 2013512220 13635 15110 17590 2099012730 14190 15735 18435 2201513240 14780 16415 19280 2304513750 15380 17120 20115 2411014280 15995 17840 21120 2538014725 16515 18450 22165 2668516260 18270 20470 24970 3017516660 18725 21010 25655 3103517170 19310 21695 26515 3211517565 19775 22235 27385 3321018085 20375 22945 28445 3454018650 21015 23645 29700 360701040 1175 1400 1500 1825

1330 1415 1550 1635 18501165 1245 1365 1440 16301040 1175 1400 1500 1825

55

130 cm 140 cm 160 cm

180 cm 200 cm

43 cm 50 cm 60 cm

Items for base frames and mounting connections (in aluminium and steel)

Non-Standard lengths of mounting connections available to special order

from 180 to 240 cm from 241 to 279 cm from 280 to 300 cm

Base position and connecting bar lengths

from 301 to 339 cm from 340 to 369 cm

from length 370 to 390 cm: 220 cm from length 400 to 430 cm: 2 x 135 cm from length 440 to 470 cm: 2 x 145 cmfrom length 480 to 510 cm: 2 x 160 cm from length 520 to 550 cm: 2 x 180 cm from length 560 to 590 cm: 2 x 200 cmfrom length 600 to 630 cm: 2 x 220 cm from length 640 to 650 cm: 2 x 230 cm from length 660 to 670 cm: 2 x 240 cmfrom length 680 to 690 cm: 2 x 250 cm from length 700 to 710 cm: 2 x 260 cm

TIX Rectangles (Please enquire for table widths above 150 cm)

width Breite 90 to 99 cm width 100 to 129 cm width 130 to 149 cm

• Aluminium brushed natural anodised • oiled untreated steel • steel lacquered aluminium colour

• Aluminium brushed natural anodised (Max. table length 260 cm | Max. table width 100 cm)

• oiled untreated steel • steel lacquered aluminium colour

• oiled untreated steel • steel lacquered aluminium colour

TIX Connecting bar lengths

Retail in EURO excl. VAT

56

TIX Round table | Selection | steel

Top Solid wood, selection, 40 mm thicknessEdge K25Surface lacquered, oiled or soaped Base 2 or 4 right angle curved steel bases with aluminium colour

finish or untreated oiled finish Design Dante Bonuccelli

Article x H in cm

TIXRDWS130TIXRDWS140TIXRDWS150TIXRDWS160TIXRDWS170TIXRDWS180TIXRDWS190TIXRDWS200Surface difference per m² for non-standard sizes

Table area m²

130 x 74 (2 right angles curved 43 cm) 140 x 74 (2 right angles curved 43 cm) 150 x 74 (2 right angles curved 55 cm) 160 x 74 (2 right angles curved 55 cm) 170 x 74 (4 right angles curved 43 cm) 180 x 74 (4 right angles curved 43 cm) 190 x 74 (4 right angles curved 43 cm) 200 x 74 (4 right angles curved 55 cm)

1.691.962.252.562.893.243.614.00

Additional top forms (round, rectangular, elliptical, boat-shaped etc.) could also be manufactured.

TIX Round table | naturart | steel

Top Solid wood naturart, 40 mm thicknessEdge K25Surface natural, oiled or soaped, cracks and knots can be black

filled and sealed or alternatively left natural Base 2 or 4 right angle curved steel bases

with aluminium colour finish or untreated oiled finish Design Dante Bonuccelli

Article x H in cm

TIXRDNS130TIXRDNS140TIXRDNS150TIXRDNS160TIXRDNS170TIXRDNS180TIXRDNS190TIXRDNS200Surface difference per m² for non-standard sizes

Table area m²

130 x 74 (2 right angles curved 43 cm) 140 x 74 (2 right angles curved 43 cm) 150 x 74 (2 right angles curved 55 cm) 160 x 74 (2 right angles curved 55 cm) 170 x 74 (4 right angles curved 43 cm) 180 x 74 (4 right angles curved 43 cm) 190 x 74 (4 right angles curved 43 cm) 200 x 74 (4 right angles curved 55 cm)

1.691.962.252.562.893.243.614.00

Additional top forms (round, rectangular, elliptical, boat-shaped etc.) could also be manufactured.

Elmnaturart

Sycamore Oak

naturart

Walnut naturart

Heartwood beech

naturart

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

PearBlack Walnut

with sapwood

WalnutBlack Walnut

without sapwood

Smoked oak

Extra charge Surface Table stained according to sample, per table and colour 255Extra charge Base 2 right angle curved lacquered in basic or accent colour or according to RAL/NCS, per base and per colour 415 4 right angle curved steel bases in basic or accent colour or according to RAL/NCS, per base and per colour 820

3980 4370 4750 5295 61704345 4800 5260 5865 68654765 5280 5805 6500 76805200 5795 6395 7235 86156880 7550 8230 9230 108157410 8175 8955 10145 119507975 8845 9720 11130 131858595 9565 10530 12155 144451040 1175 1400 1500 1825

3750 3970 4075 53054080 4335 4440 59104440 4735 4840 66004850 5200 5535 73156510 6900 7280 93157000 7435 7855 102457520 8005 8490 112508070 8615 9160 122901040 1175 1400 1825

57

TIX Bench | Selection

Top Solid wood, selection, 40 mm thickness, separated by a slight, longitudinal centered space Edge K25Surface lacquered, oiled or soapedBase 2 solid aluminium rectangles, brushed with natural

anodised finish or oiled untreated steelDesign Dante Bonuccelli

Article L x W x H in cm

TIXBA120TIXBA140TIXBA160TIXBA180TIXBA200TIXBA220TIXBA240TIXBA260TIXBA280TIXBA300

120 x 40 x 45140 x 40 x 45160 x 40 x 45180 x 40 x 45200 x 40 x 45220 x 40 x 45240 x 40 x 45260 x 40 x 45280 x 40 x 45300 x 40 x 45

0.480.560.640.720.800.880.961.041.121.20

Seating area m²

TIX Bench | Rails

Top Solid wood, 40 mm thickness, 8 solid wood rails 30 x 80 mmEdge K25Surface lacquered, oiled or soapedBase 2 solid aluminium rectangles, brushed with natural

anodised finish or oiled untreated steelDesign Dante Bonuccelli

Article L x W x H in cm

TIXBAL120TIXBAL140TIXBAL160TIXBAL180TIXBAL200TIXBAL220TIXBAL240TIXBAL260TIXBAL280TIXBAL300

120 x 45 x 45140 x 45 x 45160 x 45 x 45180 x 45 x 45200 x 45 x 45220 x 45 x 45240 x 45 x 45260 x 45 x 45280 x 45 x 45300 x 45 x 45

0.540.630.720.810.900.991.081.171.261.35

Seating area m²

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

Extra charge Surface Bench stained according to sample, per table and colour 255Extra charge Base Base lacquered in basic or accent colour or according to RAL/NCS, per base and per colour 485 Base in solid aluminium brushed with bronze or black anodised finish 300

1880 2015 2085 2240 24802005 2150 2245 2420 26952140 2305 2425 2620 29302285 2480 2615 2850 32202510 2725 2885 3170 35852650 2885 3065 3390 38702795 3045 3240 3655 41853030 3315 3530 4000 46053235 3530 3785 4330 50053400 3725 4010 4685 5465

2565 2685 2915 3085 35102760 2910 3185 3365 38602990 3160 3480 3690 42653225 3405 3775 4045 47203470 3670 4095 4430 51953690 3925 4380 4785 56454005 4260 4770 5275 62354340 4635 5195 5790 68604755 5070 5695 6395 76005120 5465 6150 7070 8430

Retail in EURO excl. VAT

56

TIX Round table | Selection | steel

Top Solid wood, selection, 40 mm thicknessEdge K25Surface lacquered, oiled or soaped Base 2 or 4 right angle curved steel bases with aluminium colour

finish or untreated oiled finish Design Dante Bonuccelli

Article x H in cm

TIXRDWS130TIXRDWS140TIXRDWS150TIXRDWS160TIXRDWS170TIXRDWS180TIXRDWS190TIXRDWS200Surface difference per m² for non-standard sizes

Table area m²

130 x 74 (2 right angles curved 43 cm) 140 x 74 (2 right angles curved 43 cm) 150 x 74 (2 right angles curved 55 cm) 160 x 74 (2 right angles curved 55 cm) 170 x 74 (4 right angles curved 43 cm) 180 x 74 (4 right angles curved 43 cm) 190 x 74 (4 right angles curved 43 cm) 200 x 74 (4 right angles curved 55 cm)

1.691.962.252.562.893.243.614.00

Additional top forms (round, rectangular, elliptical, boat-shaped etc.) could also be manufactured.

TIX Round table | naturart | steel

Top Solid wood naturart, 40 mm thicknessEdge K25Surface natural, oiled or soaped, cracks and knots can be black

filled and sealed or alternatively left natural Base 2 or 4 right angle curved steel bases

with aluminium colour finish or untreated oiled finish Design Dante Bonuccelli

Article x H in cm

TIXRDNS130TIXRDNS140TIXRDNS150TIXRDNS160TIXRDNS170TIXRDNS180TIXRDNS190TIXRDNS200Surface difference per m² for non-standard sizes

Table area m²

130 x 74 (2 right angles curved 43 cm) 140 x 74 (2 right angles curved 43 cm) 150 x 74 (2 right angles curved 55 cm) 160 x 74 (2 right angles curved 55 cm) 170 x 74 (4 right angles curved 43 cm) 180 x 74 (4 right angles curved 43 cm) 190 x 74 (4 right angles curved 43 cm) 200 x 74 (4 right angles curved 55 cm)

1.691.962.252.562.893.243.614.00

Additional top forms (round, rectangular, elliptical, boat-shaped etc.) could also be manufactured.

Elmnaturart

Sycamore Oak

naturart

Walnut naturart

Heartwood beech

naturart

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

PearBlack Walnut

with sapwood

WalnutBlack Walnut

without sapwood

Smoked oak

Extra charge Surface Table stained according to sample, per table and colour 255Extra charge Base 2 right angle curved lacquered in basic or accent colour or according to RAL/NCS, per base and per colour 415 4 right angle curved steel bases in basic or accent colour or according to RAL/NCS, per base and per colour 820

3980 4370 4750 5295 61704345 4800 5260 5865 68654765 5280 5805 6500 76805200 5795 6395 7235 86156880 7550 8230 9230 108157410 8175 8955 10145 119507975 8845 9720 11130 131858595 9565 10530 12155 144451040 1175 1400 1500 1825

3750 3970 4075 53054080 4335 4440 59104440 4735 4840 66004850 5200 5535 73156510 6900 7280 93157000 7435 7855 102457520 8005 8490 112508070 8615 9160 122901040 1175 1400 1825

57

TIX Bench | Selection

Top Solid wood, selection, 40 mm thickness, separated by a slight, longitudinal centered space Edge K25Surface lacquered, oiled or soapedBase 2 solid aluminium rectangles, brushed with natural

anodised finish or oiled untreated steelDesign Dante Bonuccelli

Article L x W x H in cm

TIXBA120TIXBA140TIXBA160TIXBA180TIXBA200TIXBA220TIXBA240TIXBA260TIXBA280TIXBA300

120 x 40 x 45140 x 40 x 45160 x 40 x 45180 x 40 x 45200 x 40 x 45220 x 40 x 45240 x 40 x 45260 x 40 x 45280 x 40 x 45300 x 40 x 45

0.480.560.640.720.800.880.961.041.121.20

Seating area m²

TIX Bench | Rails

Top Solid wood, 40 mm thickness, 8 solid wood rails 30 x 80 mmEdge K25Surface lacquered, oiled or soapedBase 2 solid aluminium rectangles, brushed with natural

anodised finish or oiled untreated steelDesign Dante Bonuccelli

Article L x W x H in cm

TIXBAL120TIXBAL140TIXBAL160TIXBAL180TIXBAL200TIXBAL220TIXBAL240TIXBAL260TIXBAL280TIXBAL300

120 x 45 x 45140 x 45 x 45160 x 45 x 45180 x 45 x 45200 x 45 x 45220 x 45 x 45240 x 45 x 45260 x 45 x 45280 x 45 x 45300 x 45 x 45

0.540.630.720.810.900.991.081.171.261.35

Seating area m²

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

Extra charge Surface Bench stained according to sample, per table and colour 255Extra charge Base Base lacquered in basic or accent colour or according to RAL/NCS, per base and per colour 485 Base in solid aluminium brushed with bronze or black anodised finish 300

1880 2015 2085 2240 24802005 2150 2245 2420 26952140 2305 2425 2620 29302285 2480 2615 2850 32202510 2725 2885 3170 35852650 2885 3065 3390 38702795 3045 3240 3655 41853030 3315 3530 4000 46053235 3530 3785 4330 50053400 3725 4010 4685 5465

2565 2685 2915 3085 35102760 2910 3185 3365 38602990 3160 3480 3690 42653225 3405 3775 4045 47203470 3670 4095 4430 51953690 3925 4380 4785 56454005 4260 4770 5275 62354340 4635 5195 5790 68604755 5070 5695 6395 76005120 5465 6150 7070 8430

Retail in EURO excl. VAT

58

The individual tables in the combinations are possible in the following length measurements:

TIX Office | Double combination

Description These basic units are a complete combination with conference table and desk, incl. feet.

Top Solid wood, selection, 40 mm thickness, Shape as requested (see below)Edge K25Surface lacquered, oiled or soapedBase T- and/or X-feet, aluminium natural anodisedDesign Dante Bonuccelli

Article L x W1 x W2 x H in cm

X2KC300X2KC310X2KC320X2KC330X2KC340X2KC350X2KC360X2KC370X2KC380X2KC390X2KC400

300 x 130 x 65 x 75310 x 130 x 65 x 75320 x 130 x 65 x 75330 x 130 x 65 x 75340 x 140 x 65 x 75350 x 140 x 65 x 75360 x 140 x 65 x 75370 x 140 x 65 x 75380 x 150 x 65 x 75390 x 150 x 65 x 75400 x 150 x 65 x 75

There is the possiblity that the set up and/or the size of the individual tables can be self-determined. Simply add each table length and use the next bigger size of the standard-combination in the desired wood type and that determines the price.

Length of the combination

Length of the conference

table

Length of the work table

Article

300310320330340350360370380390400

120120120120130130130130140140140

180190200210210220230240240250260

X2KC300X2KC310X2KC320X2KC330X2KC340X2KC350X2KC360X2KC370X2KC380X2KC390X2KC400

Wedge shaped with Wedge | right Trapezoid with radius | right Trapezoid | right

Wedge shaped with Wedge | left Trapezoid with radius | left Trapezoid | left

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

Surface difference per m² for non-standard sizes

Extra charge Surface Combination stained according to sample, per table and colour 415Extra charge Base X-feet lacquered according to RAL/NCS, per base and per colour 485 1 aluminium or steel base instead of 2 X-legs 195

7550 8345 9235 10265 122307760 8580 9515 10625 126807970 8820 9790 10950 130858315 9220 10245 11520 138008700 9650 10740 12095 145058930 9905 11040 12440 149359305 10335 11530 13135 157959740 10825 12100 13800 16635

10185 11330 12675 14420 1740510600 11795 13220 15120 1827010925 12160 13640 15615 188851040 1175 1400 1500 1825

59

TIX Individual work station (height adjustable)

Top Solid wood, selection, 40 mm thickness Electrical height adjustment from 75 to 125 cmShape rectangularEdge K25Surface lacquered, oiled or soapedBase 2 double rectangular supports, aluminium coloured or black lacquered

All wiring (horizontal and vertical) between the supports and connecting pieces are invisible.

Design Dante Bonuccelli

Article L x W x H in cm

XEH220XEH240XEH260XEH280

220 x 100 x 75-125240 x 100 x 75-125260 x 100 x 75-125280 x 110 x 75-125

Table area m²

2.202.402.603.08

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

TIX Individual tables for combinations

Top Solid wood, selection, 40 mm thicknessShape Shape as requested (see above)Edge K25Surface lacquered, oiled or soapedBase 1 rectangular support, solid aluminium brushed with

natural anodised finish or oiled untreated steel 1 TIX connecting unit

Design Dante Bonuccelli

These basic types are tables with a rectangular support. The opposite side is supported by the lowboard or the desk body (see page 65 on).

Optional at extra charge: TIX electric power supply box instead of connecting element (see page 76).

Article L x W x H in cm

XEK200XEK210XEK220XEK230XEK240XEK250XEK260XEK270XEK280XEK290XEK300

200 x 100 x 75210 x 100 x 75220 x 100 x 75230 x 100 x 75240 x 100 x 75250 x 100 x 75260 x 100 x 75270 x 110 x 75280 x 110 x 75290 x 110 x 75300 x 110 x 75

Table area m²

2.002.102.202.302.402.502.602.973.083.193.30

Surface difference per m² for non-standard sizes

Surface difference per m² for non-standard sizes

TIX Lowboard see page 66 onTIX Desk body see page 65 on

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

Extra charge Surface Single-piece table top (no centre joint line) 0 Table stained according to sample, per table and colour 255Extra charge Base Base steel laquered in basic or accent colour or according to RAL/NCS, per base and per colour 255 Base in solid aluminium brushed bronze or black anodised 230

Extra charge Base Base steel laquered in basic or accent colour or according to RAL/NCS, per base and per colour 820 Base cladded in untreated steel, natural aluminium, bronze or black anodised 1605

8775 9120 9800 10445 116959060 9435 10195 10990 123959390 9815 10655 11565 13135

10180 10695 11725 12910 148401040 1175 1400 1500 1825

4450 4930 5460 6095 71804620 5115 5685 6375 75154790 5305 5910 6670 78854955 5505 6140 6970 82505240 5850 6510 7495 89105415 6060 6760 7805 93105605 6265 7020 8130 97205970 6690 7540 8765 107406170 6915 7810 9165 112956375 7165 8095 9570 118706585 7405 8365 10000 124751040 1175 1400 1500 1825

Retail in EURO excl. VAT

58

The individual tables in the combinations are possible in the following length measurements:

TIX Office | Double combination

Description These basic units are a complete combination with conference table and desk, incl. feet.

Top Solid wood, selection, 40 mm thickness, Shape as requested (see below)Edge K25Surface lacquered, oiled or soapedBase T- and/or X-feet, aluminium natural anodisedDesign Dante Bonuccelli

Article L x W1 x W2 x H in cm

X2KC300X2KC310X2KC320X2KC330X2KC340X2KC350X2KC360X2KC370X2KC380X2KC390X2KC400

300 x 130 x 65 x 75310 x 130 x 65 x 75320 x 130 x 65 x 75330 x 130 x 65 x 75340 x 140 x 65 x 75350 x 140 x 65 x 75360 x 140 x 65 x 75370 x 140 x 65 x 75380 x 150 x 65 x 75390 x 150 x 65 x 75400 x 150 x 65 x 75

There is the possiblity that the set up and/or the size of the individual tables can be self-determined. Simply add each table length and use the next bigger size of the standard-combination in the desired wood type and that determines the price.

Length of the combination

Length of the conference

table

Length of the work table

Article

300310320330340350360370380390400

120120120120130130130130140140140

180190200210210220230240240250260

X2KC300X2KC310X2KC320X2KC330X2KC340X2KC350X2KC360X2KC370X2KC380X2KC390X2KC400

Wedge shaped with Wedge | right Trapezoid with radius | right Trapezoid | right

Wedge shaped with Wedge | left Trapezoid with radius | left Trapezoid | left

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

Surface difference per m² for non-standard sizes

Extra charge Surface Combination stained according to sample, per table and colour 415Extra charge Base X-feet lacquered according to RAL/NCS, per base and per colour 485 1 aluminium or steel base instead of 2 X-legs 195

7550 8345 9235 10265 122307760 8580 9515 10625 126807970 8820 9790 10950 130858315 9220 10245 11520 138008700 9650 10740 12095 145058930 9905 11040 12440 149359305 10335 11530 13135 157959740 10825 12100 13800 16635

10185 11330 12675 14420 1740510600 11795 13220 15120 1827010925 12160 13640 15615 188851040 1175 1400 1500 1825

59

TIX Individual work station (height adjustable)

Top Solid wood, selection, 40 mm thickness Electrical height adjustment from 75 to 125 cmShape rectangularEdge K25Surface lacquered, oiled or soapedBase 2 double rectangular supports, aluminium coloured or black lacquered

All wiring (horizontal and vertical) between the supports and connecting pieces are invisible.

Design Dante Bonuccelli

Article L x W x H in cm

XEH220XEH240XEH260XEH280

220 x 100 x 75-125240 x 100 x 75-125260 x 100 x 75-125280 x 110 x 75-125

Table area m²

2.202.402.603.08

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

TIX Individual tables for combinations

Top Solid wood, selection, 40 mm thicknessShape Shape as requested (see above)Edge K25Surface lacquered, oiled or soapedBase 1 rectangular support, solid aluminium brushed with

natural anodised finish or oiled untreated steel 1 TIX connecting unit

Design Dante Bonuccelli

These basic types are tables with a rectangular support. The opposite side is supported by the lowboard or the desk body (see page 65 on).

Optional at extra charge: TIX electric power supply box instead of connecting element (see page 76).

Article L x W x H in cm

XEK200XEK210XEK220XEK230XEK240XEK250XEK260XEK270XEK280XEK290XEK300

200 x 100 x 75210 x 100 x 75220 x 100 x 75230 x 100 x 75240 x 100 x 75250 x 100 x 75260 x 100 x 75270 x 110 x 75280 x 110 x 75290 x 110 x 75300 x 110 x 75

Table area m²

2.002.102.202.302.402.502.602.973.083.193.30

Surface difference per m² for non-standard sizes

Surface difference per m² for non-standard sizes

TIX Lowboard see page 66 onTIX Desk body see page 65 on

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

Extra charge Surface Single-piece table top (no centre joint line) 0 Table stained according to sample, per table and colour 255Extra charge Base Base steel laquered in basic or accent colour or according to RAL/NCS, per base and per colour 255 Base in solid aluminium brushed bronze or black anodised 230

Extra charge Base Base steel laquered in basic or accent colour or according to RAL/NCS, per base and per colour 820 Base cladded in untreated steel, natural aluminium, bronze or black anodised 1605

8775 9120 9800 10445 116959060 9435 10195 10990 123959390 9815 10655 11565 13135

10180 10695 11725 12910 148401040 1175 1400 1500 1825

4450 4930 5460 6095 71804620 5115 5685 6375 75154790 5305 5910 6670 78854955 5505 6140 6970 82505240 5850 6510 7495 89105415 6060 6760 7805 93105605 6265 7020 8130 97205970 6690 7540 8765 107406170 6915 7810 9165 112956375 7165 8095 9570 118706585 7405 8365 10000 124751040 1175 1400 1500 1825

Retail in EURO excl. VAT

60

TIX Side work station (height adjustable)

Top Solid wood, selection, or naturart, 40 mm thickness height adjustable from 73 to 113 cm

Edge K25Surface lacquered, oiled or soapedBody Outer face: Solid wood, lacquered, oiled or soaped

Inner face: slate black lacquered or outer and inner face: MDF lacquered with the same basic paint

Covering top Solid wood, selection, 40 mm thickness, with side profiled grips

Front Brushed aluminium with natural anodised finish or untreated oiled steelVisible back Brushed aluminium with natural anodised finish or untreated oiled steelFloor base Steel, lacquered aluminium colour or blackHeight 60 cmLocking system Central Lock, barrel on the right (left if requested)Configuration 1 utensil organizer in MDF, deep black lacquered

1 A6 drawer incl. 2 dividers, heartwood ash, black lacquered 1 A4 hanging file drawer, heartwood ash, black lacquered incl. standard central lock and visible back

Design Dante Bonuccelli

Maximum table length 160 cm | Maximum table width 80 cm

Article L x W x H in cm

XNAH130XNAH140XNAH150XNAH160

130 x 70 x 73-113140 x 70 x 73-113150 x 70 x 73-113160 x 70 x 73-113

Tischfläche in m²

0.910.981.051.12

Article L x W x H in cm

XSTFH130XSTFH140XSTFH150

130 x 70 x 75 (-115)140 x 70 x 75 (-115)150 x 70 x 75 (-115)

TIX Height adjustable desk unit | stand alone

Top Solid wood, selection, or naturart, 40 mm thickness Manual height adjustment from 75 to 115 cm

Shape rectangularEdge K25Surface lacquered, oiled or soapedBase Steel floor plate, colour black or aluminium

Aluminium planking, black or aluminium paint finish Spring mechanism, stepless height adjustment at pedal, high-loss chrome plated finish in all cases

Design Dante Bonuccelli

Reduced price for body in MDF, with basic colour paint finishReduced price with body width 43 cm instead of 60 cm

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

Installing the column lift reduces the usable depth of the drawers by 16 cm

Maximum table length 150 cm | Maximum table width 70 cm

Surface difference per m² for non-standard sizes

Extra charge Surface Table top stained according to sample 255 Body lacquered in accent colour or according to RAL/NCS, per body and per colour 255Extra charge Drawer Drawer in solid wood | black leather 825Options Drawer element XK666 instead XK64, width 60 cm (described on page 65) 285 Extra charge for active ventilation element (XLE) for equipment that radiates heat 255

Extra charge Base Cladding in black brushed aluminium or bronze anodised 220 Aluminium cladding lacquered according to RAL/NCS 350

7155 7405 7925 8315 92207245 7500 8045 8445 93757345 7610 8190 8600 95757440 7715 8315 8745 97651040 1175 1400 1500 1825

-475 -605 -810 -945 -1295-385 -365 -415 -445 -500

3695 3905 4125 4360 48403790 4020 4255 4510 50203890 4130 4380 4650 5210

61

Entire bodylacquered (Basic colour)

TIX Desk body XK64

Body Outer face: Solid wood, lacquered, oiled or soaped Inner face: slate grey lacquered or outer and inner face: MDF lacquered with the same basic paint

Covering top Solid wood, selection, 40 mm thickness with side profiled grips

Front Brushed aluminium with natural anodised finish or untreated oiled steelVisible back Brushed aluminium with natural anodised finish or untreated oiled steelBase Levelling feetHeight 60 cmLocking system Central Lock, barrel on the right (left if requested)Cable management Cable access between the body and the removable visible back

Configuration 1 utensil organizer in MDF, deep black lacquered 1 A6 drawer incl. 2 dividers, heartwood ash, black lacquered 1 A4 hanging file drawer, heartwood ash, black lacquered (incl. standard central lock and visible back)

Design Dante Bonuccelli

Article W x D x H

XK6443P1 43 x 65 x 60

Width of the body 43 cm:

XK6460P1 60 x 65 x 60

Width of the body 60 cm:

TIX Desk body XK666

Description as body XK64 with different compartmentation (4 drawers):

Configuration 1 utensil organizer 1 A6 drawer incl. 2 dividers in MDF deep black lacquered 2 A6 drawers without partitions in MDF deep black lacquered (incl. standard central lock and visible back)

Article W x D x H

XK66643P1 43 x 65 x 60

Width of the body 43 cm:

XK66660P1 60 x 65 x 60

Width of the body 60 cm:

Entire bodylacquered (Basic colour)

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

PearBlack Walnut

with sapwood

WalnutBlack Walnut

without sapwood

Smoked oak

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

PearBlack Walnut

with sapwood

WalnutBlack Walnut

without sapwood

Smoked oak

Extra charge Surface Table top stained according to sample 255 Body lacquered in accent colour or according to RAL/NCS, per body and per colour 255Extra charge Drawer Drawer in solid wood | black leather 825Options Body on visible casters (height 64 cm) 65 Extra charge for active ventilation element (XLE) for equipment that radiates heat 255

2540 3015 3145 3350 3485 3835

2825 3395 3510 3765 3925 4335

2765 3190 3325 3550 3670 4020

3060 3585 3700 3980 4125 4525

Retail in EURO excl. VAT

60

TIX Side work station (height adjustable)

Top Solid wood, selection, or naturart, 40 mm thickness height adjustable from 73 to 113 cm

Edge K25Surface lacquered, oiled or soapedBody Outer face: Solid wood, lacquered, oiled or soaped

Inner face: slate black lacquered or outer and inner face: MDF lacquered with the same basic paint

Covering top Solid wood, selection, 40 mm thickness, with side profiled grips

Front Brushed aluminium with natural anodised finish or untreated oiled steelVisible back Brushed aluminium with natural anodised finish or untreated oiled steelFloor base Steel, lacquered aluminium colour or blackHeight 60 cmLocking system Central Lock, barrel on the right (left if requested)Configuration 1 utensil organizer in MDF, deep black lacquered

1 A6 drawer incl. 2 dividers, heartwood ash, black lacquered 1 A4 hanging file drawer, heartwood ash, black lacquered incl. standard central lock and visible back

Design Dante Bonuccelli

Maximum table length 160 cm | Maximum table width 80 cm

Article L x W x H in cm

XNAH130XNAH140XNAH150XNAH160

130 x 70 x 73-113140 x 70 x 73-113150 x 70 x 73-113160 x 70 x 73-113

Tischfläche in m²

0.910.981.051.12

Article L x W x H in cm

XSTFH130XSTFH140XSTFH150

130 x 70 x 75 (-115)140 x 70 x 75 (-115)150 x 70 x 75 (-115)

TIX Height adjustable desk unit | stand alone

Top Solid wood, selection, or naturart, 40 mm thickness Manual height adjustment from 75 to 115 cm

Shape rectangularEdge K25Surface lacquered, oiled or soapedBase Steel floor plate, colour black or aluminium

Aluminium planking, black or aluminium paint finish Spring mechanism, stepless height adjustment at pedal, high-loss chrome plated finish in all cases

Design Dante Bonuccelli

Reduced price for body in MDF, with basic colour paint finishReduced price with body width 43 cm instead of 60 cm

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

Installing the column lift reduces the usable depth of the drawers by 16 cm

Maximum table length 150 cm | Maximum table width 70 cm

Surface difference per m² for non-standard sizes

Extra charge Surface Table top stained according to sample 255 Body lacquered in accent colour or according to RAL/NCS, per body and per colour 255Extra charge Drawer Drawer in solid wood | black leather 825Options Drawer element XK666 instead XK64, width 60 cm (described on page 65) 285 Extra charge for active ventilation element (XLE) for equipment that radiates heat 255

Extra charge Base Cladding in black brushed aluminium or bronze anodised 220 Aluminium cladding lacquered according to RAL/NCS 350

7155 7405 7925 8315 92207245 7500 8045 8445 93757345 7610 8190 8600 95757440 7715 8315 8745 97651040 1175 1400 1500 1825

-475 -605 -810 -945 -1295-385 -365 -415 -445 -500

3695 3905 4125 4360 48403790 4020 4255 4510 50203890 4130 4380 4650 5210

61

Entire bodylacquered (Basic colour)

TIX Desk body XK64

Body Outer face: Solid wood, lacquered, oiled or soaped Inner face: slate grey lacquered or outer and inner face: MDF lacquered with the same basic paint

Covering top Solid wood, selection, 40 mm thickness with side profiled grips

Front Brushed aluminium with natural anodised finish or untreated oiled steelVisible back Brushed aluminium with natural anodised finish or untreated oiled steelBase Levelling feetHeight 60 cmLocking system Central Lock, barrel on the right (left if requested)Cable management Cable access between the body and the removable visible back

Configuration 1 utensil organizer in MDF, deep black lacquered 1 A6 drawer incl. 2 dividers, heartwood ash, black lacquered 1 A4 hanging file drawer, heartwood ash, black lacquered (incl. standard central lock and visible back)

Design Dante Bonuccelli

Article W x D x H

XK6443P1 43 x 65 x 60

Width of the body 43 cm:

XK6460P1 60 x 65 x 60

Width of the body 60 cm:

TIX Desk body XK666

Description as body XK64 with different compartmentation (4 drawers):

Configuration 1 utensil organizer 1 A6 drawer incl. 2 dividers in MDF deep black lacquered 2 A6 drawers without partitions in MDF deep black lacquered (incl. standard central lock and visible back)

Article W x D x H

XK66643P1 43 x 65 x 60

Width of the body 43 cm:

XK66660P1 60 x 65 x 60

Width of the body 60 cm:

Entire bodylacquered (Basic colour)

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

PearBlack Walnut

with sapwood

WalnutBlack Walnut

without sapwood

Smoked oak

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

PearBlack Walnut

with sapwood

WalnutBlack Walnut

without sapwood

Smoked oak

Extra charge Surface Table top stained according to sample 255 Body lacquered in accent colour or according to RAL/NCS, per body and per colour 255Extra charge Drawer Drawer in solid wood | black leather 825Options Body on visible casters (height 64 cm) 65 Extra charge for active ventilation element (XLE) for equipment that radiates heat 255

2540 3015 3145 3350 3485 3835

2825 3395 3510 3765 3925 4335

2765 3190 3325 3550 3670 4020

3060 3585 3700 3980 4125 4525

Retail in EURO excl. VAT

62

Entire bodylacquered (Basic colour)

TIX Lowboard

Body Outer face: Solid wood, lacquered, oiled or soaped | Inner face: slate black lacquered or outer and inner face: MDF lacquered with the same basic paint

Covering top Solid wood, selection, 40 mm thickness, with top and side profiled gripsFront Brushed aluminium with natural anodised finish or untreated oiled steelVisible back Brushed aluminium with natural anodised finish or untreated oiled steelFeet Levelling feetHeight 60 cmLocking system Central lock, in drawer unit, barrel on the left or right, depending on how

the unit is positioned.Configuration Sliding front for shelf and printer element, including cable guide between body

and detachable exposed rear panelDesign Dante Bonuccelli

Article W x D x H in cm

XLB180P1 180 x 65 x 60

TIX Lowboard LB 180 (3 x 60 cm)left or right Drawer unit XK64 composed of:

1 utensil organizer in MDF, deep black lacquered 1 A6 drawer incl. 2 dividers, heartwood ash, black lacquered 1 A4 hanging file drawer, heartwood ash, black lacquered incl. standard central lock and visible back

in the middle Printer unit incl. visible back

left or right Shelving unit incl. visible back 1 sliding front across shelf/printer element

XLB160P1 163 x 65 x 60

XLB120P1 120 x 65 x 60

TIX Lowboard LB 160 (1 x 43 cm | 2 x 60 cm)left or right Drawer unit XK64 composed of:

1 utensil organizer 1 A6 drawer incl. 2 dividers in MDF deep black lacquered 1 A4 hanging file drawer in MDF deep black lacquered incl. standard central lock and visible back

in the middle Printer unit incl. visible back

left or right Shelving unit incl. visible back

1 sliding front across shelf/printer element

TIX Lowboard LB 120 (2 x 60 cm)left or right Drawer unit XK64 composed of:

1 utensil organizer 1 A6 drawer incl. 2 dividers in MDF deep black lacquered 1 A4 hanging file drawer in MDF deep black lacquered incl. standard central lock and visible back

left or right Shelving unit with 1 adjustable shelf and a sliding door incl. visible back

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

PearBlack Walnut

with sapwood

WalnutBlack Walnut

without sapwood

Smoked oak

Extra charge Surface Table top stained according to sample 255 Body lacquered in accent colour or according to RAL/NCS, per body and per colour 255Extra charge Drawer Drawer in solid wood | black leather 825 Drawer element XK666 instead XK64, width 60 cm 285 Options Extra charge for pull-out shelf instead of regular shelf 255 Extra charge for active ventilation element (XLE) for equipment that radiates heat 255

6375 6865 7205 7575 7765 8240

5865 6355 6700 7020 7185 7630

4630 4955 5220 5525 5650 6035

63

Entire bodylacquered (Basic colour)

Article W x D x H in cm

XLB100P1 103 x 65 x 60

TIX Lowboard LB 100 (1 x 43 cm | 1 x 60 cm)

left or right Drawer unit XK64 composed of: 1 utensil organizer 1 A6 drawer incl. 2 dividers in MDF deep black lacquered 1 A4 hanging file drawer in MDF deep black lacquered incl. standard central lock and visible back

left or right Shelving unit with 1 adjustable shelf and a sliding door incl. visible back

Article W x D x H in cm

XLB70P1 73 x 65 x 60

TIX Lowboard LB 73 (1 x 43 cm | 1 x 30 cm)left or right Drawer unit XK64 composed of:

1 utensil organizer 1 A6 drawer incl. 2 dividers in MDF deep black lacquered 1 A4 hanging file drawer in MDF deep black lacquered incl. standard central lock and visible back

left or right Shelving unit with 1 adjustable shelf and a sliding door incl. visible back

Entire bodylacquered (Basic colour)

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

PearBlack Walnut

with sapwood

WalnutBlack Walnut

without sapwood

Smoked oak

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

PearBlack Walnut

with sapwood

WalnutBlack Walnut

without sapwood

Smoked oak

Extra charge Surface Table top stained according to sample 255 Body lacquered in accent colour or according to RAL/NCS, per body and per colour 255Extra charge Drawer Drawer in solid wood | black leather 825 Drawer element XK666 instead XK64, width 60 cm 285 Options Extra charge for pull-out shelf instead of regular shelf 255 Extra charge for active ventilation element (XLE) for equipment that radiates heat 255

4415 4780 5015 5305 5420 5760

3970 4300 4515 4775 4880 5195

Retail in EURO excl. VAT

62

Entire bodylacquered (Basic colour)

TIX Lowboard

Body Outer face: Solid wood, lacquered, oiled or soaped | Inner face: slate black lacquered or outer and inner face: MDF lacquered with the same basic paint

Covering top Solid wood, selection, 40 mm thickness, with top and side profiled gripsFront Brushed aluminium with natural anodised finish or untreated oiled steelVisible back Brushed aluminium with natural anodised finish or untreated oiled steelFeet Levelling feetHeight 60 cmLocking system Central lock, in drawer unit, barrel on the left or right, depending on how

the unit is positioned.Configuration Sliding front for shelf and printer element, including cable guide between body

and detachable exposed rear panelDesign Dante Bonuccelli

Article W x D x H in cm

XLB180P1 180 x 65 x 60

TIX Lowboard LB 180 (3 x 60 cm)left or right Drawer unit XK64 composed of:

1 utensil organizer in MDF, deep black lacquered 1 A6 drawer incl. 2 dividers, heartwood ash, black lacquered 1 A4 hanging file drawer, heartwood ash, black lacquered incl. standard central lock and visible back

in the middle Printer unit incl. visible back

left or right Shelving unit incl. visible back 1 sliding front across shelf/printer element

XLB160P1 163 x 65 x 60

XLB120P1 120 x 65 x 60

TIX Lowboard LB 160 (1 x 43 cm | 2 x 60 cm)left or right Drawer unit XK64 composed of:

1 utensil organizer 1 A6 drawer incl. 2 dividers in MDF deep black lacquered 1 A4 hanging file drawer in MDF deep black lacquered incl. standard central lock and visible back

in the middle Printer unit incl. visible back

left or right Shelving unit incl. visible back

1 sliding front across shelf/printer element

TIX Lowboard LB 120 (2 x 60 cm)left or right Drawer unit XK64 composed of:

1 utensil organizer 1 A6 drawer incl. 2 dividers in MDF deep black lacquered 1 A4 hanging file drawer in MDF deep black lacquered incl. standard central lock and visible back

left or right Shelving unit with 1 adjustable shelf and a sliding door incl. visible back

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

PearBlack Walnut

with sapwood

WalnutBlack Walnut

without sapwood

Smoked oak

Extra charge Surface Table top stained according to sample 255 Body lacquered in accent colour or according to RAL/NCS, per body and per colour 255Extra charge Drawer Drawer in solid wood | black leather 825 Drawer element XK666 instead XK64, width 60 cm 285 Options Extra charge for pull-out shelf instead of regular shelf 255 Extra charge for active ventilation element (XLE) for equipment that radiates heat 255

6375 6865 7205 7575 7765 8240

5865 6355 6700 7020 7185 7630

4630 4955 5220 5525 5650 6035

63

Entire bodylacquered (Basic colour)

Article W x D x H in cm

XLB100P1 103 x 65 x 60

TIX Lowboard LB 100 (1 x 43 cm | 1 x 60 cm)

left or right Drawer unit XK64 composed of: 1 utensil organizer 1 A6 drawer incl. 2 dividers in MDF deep black lacquered 1 A4 hanging file drawer in MDF deep black lacquered incl. standard central lock and visible back

left or right Shelving unit with 1 adjustable shelf and a sliding door incl. visible back

Article W x D x H in cm

XLB70P1 73 x 65 x 60

TIX Lowboard LB 73 (1 x 43 cm | 1 x 30 cm)left or right Drawer unit XK64 composed of:

1 utensil organizer 1 A6 drawer incl. 2 dividers in MDF deep black lacquered 1 A4 hanging file drawer in MDF deep black lacquered incl. standard central lock and visible back

left or right Shelving unit with 1 adjustable shelf and a sliding door incl. visible back

Entire bodylacquered (Basic colour)

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

PearBlack Walnut

with sapwood

WalnutBlack Walnut

without sapwood

Smoked oak

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

PearBlack Walnut

with sapwood

WalnutBlack Walnut

without sapwood

Smoked oak

Extra charge Surface Table top stained according to sample 255 Body lacquered in accent colour or according to RAL/NCS, per body and per colour 255Extra charge Drawer Drawer in solid wood | black leather 825 Drawer element XK666 instead XK64, width 60 cm 285 Options Extra charge for pull-out shelf instead of regular shelf 255 Extra charge for active ventilation element (XLE) for equipment that radiates heat 255

4415 4780 5015 5305 5420 5760

3970 4300 4515 4775 4880 5195

Retail in EURO excl. VAT

64

Entire bodylacquered (Basic colour)

TIX Sideboard

Body Outer face: Solid wood, lacquered, oiled or soaped | Inner face: slate black lacquered or outer and inner face: MDF lacquered with the same basic paint

Covering top Solid wood, selection, 40 mm thickness, with profiled gripsFront Brushed aluminium with natural anodised finish or untreated oiled steel

without visible back (extra charge see on page 73)Feet 2 rectangular supports, brushed aluminium natural anodised finish or oiled untreated steelHeight 75 cm (Body 60 cm + feet 15 cm)Design Dante Bonuccelli

Article W x D x H in cm

TIXSB2P1 120 x 46 x 75

TIX Sideboard SB2Specification with 2 doors

1 adjustable shelf per section 1 box file height | Weight 60 kg

TIXSB3P1 180 x 46 x 75

TIX Sideboard SB3Specification with 3 doors

1 adjustable shelf per section 1 box file height | Weight 90 kg

TIXSB4P1 240 x 46 x 75

TIX Sideboard SB4Specification with 4 doors

1 adjustable shelf per section 1 box file height | Weight 120 kg

TIXSB5P1 300 x 46 x 75

TIX Sideboard SB5Specification with 5 doors

1 adjustable shelf per section 1 box file height | Weight 150 kg

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

Extra charge Surface Body stained according to sample, per sideboard and colour 255 Body lacquered in accent colour or according to RAL/NCS, per sideboard and per colour 255Extra charge Locks Central lock for all doors and drawers of the sideboard with 1 lock barrel fitted at side at right (on request at left) Price per door 205 Price per drawer unit 365 for example: TIXSB3 2 doors and 1 drawer unit: 2 x EUR 205 + 1 x EUR 365 = EUR 775

3100 3630 3780 4065 4280 4815

4350 5060 5260 5630 5925 6640

5545 6405 6660 7140 7590 8485

6830 7945 8330 8835 9675 10855

65

Entire bodylacquered (Basic colour)

TIX Slideboard

Body Outer face: Solid wood, lacquered, oiled or soaped | Inner face: slate black lacquered or outer and inner face: MDF lacquered with the same basic paint

Covering top Solid wood, selection, 40 mm thickness, with profiled gripsFront 1 x Brushed aluminium with natural anodised finish or untreated oiled steel | 1 x veneered or MDF lacquered basic colour (Sliding doors) without visible back (extra charge see on page 73)Feet 2 rectangular supports, brushed aluminium natural anodised finish or oiled untreated steelHeight 75 cm (Body 60 cm + feet 15 cm)

95 cm (Body 80 cm + feet 15 cm)Design Dante Bonuccelli

Article W x D x H in cm

XSL1875P1 180 x 46 x 75

TIX Slideboard SL1875Specification with 2 sliding doors

1 adjustable shelf per section 1 box file height | weight 75 kg

XSL2475P1 240 x 46 x 75

TIX Slideboard SL2475Specification with 2 sliding doors

1 adjustable shelf per section 1 box file height | weight 95 kg

XSL1895P1 180 x 46 x 95

TIX Slideboard SL1895Specification with 2 sliding doors

2 adjustable shelves per section 2 box file height | weight 85 kg

XSL2495P1 240 x 46 x 95

TIX Slideboard SL2495Specification with 2 sliding doors

2 adjustable shelves per section 2 box file heigth | weight 115 kg

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

Extra charge Surface Body stained according to sample, per slideboard and colour 255 Body lacquered in accent colour or according to RAL/NCS, per slideboard and per colour 255Extra charge Locks Central lock for inner and outer sliding door 560

4520 5420 5675 6140 6500 7365

5235 6345 6645 7210 7650 8710

4990 6055 6335 6885 7285 8305

5875 7145 7470 8130 8615 9835

Retail in EURO excl. VAT

64

Entire bodylacquered (Basic colour)

TIX Sideboard

Body Outer face: Solid wood, lacquered, oiled or soaped | Inner face: slate black lacquered or outer and inner face: MDF lacquered with the same basic paint

Covering top Solid wood, selection, 40 mm thickness, with profiled gripsFront Brushed aluminium with natural anodised finish or untreated oiled steel

without visible back (extra charge see on page 73)Feet 2 rectangular supports, brushed aluminium natural anodised finish or oiled untreated steelHeight 75 cm (Body 60 cm + feet 15 cm)Design Dante Bonuccelli

Article W x D x H in cm

TIXSB2P1 120 x 46 x 75

TIX Sideboard SB2Specification with 2 doors

1 adjustable shelf per section 1 box file height | Weight 60 kg

TIXSB3P1 180 x 46 x 75

TIX Sideboard SB3Specification with 3 doors

1 adjustable shelf per section 1 box file height | Weight 90 kg

TIXSB4P1 240 x 46 x 75

TIX Sideboard SB4Specification with 4 doors

1 adjustable shelf per section 1 box file height | Weight 120 kg

TIXSB5P1 300 x 46 x 75

TIX Sideboard SB5Specification with 5 doors

1 adjustable shelf per section 1 box file height | Weight 150 kg

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

Extra charge Surface Body stained according to sample, per sideboard and colour 255 Body lacquered in accent colour or according to RAL/NCS, per sideboard and per colour 255Extra charge Locks Central lock for all doors and drawers of the sideboard with 1 lock barrel fitted at side at right (on request at left) Price per door 205 Price per drawer unit 365 for example: TIXSB3 2 doors and 1 drawer unit: 2 x EUR 205 + 1 x EUR 365 = EUR 775

3100 3630 3780 4065 4280 4815

4350 5060 5260 5630 5925 6640

5545 6405 6660 7140 7590 8485

6830 7945 8330 8835 9675 10855

65

Entire bodylacquered (Basic colour)

TIX Slideboard

Body Outer face: Solid wood, lacquered, oiled or soaped | Inner face: slate black lacquered or outer and inner face: MDF lacquered with the same basic paint

Covering top Solid wood, selection, 40 mm thickness, with profiled gripsFront 1 x Brushed aluminium with natural anodised finish or untreated oiled steel | 1 x veneered or MDF lacquered basic colour (Sliding doors) without visible back (extra charge see on page 73)Feet 2 rectangular supports, brushed aluminium natural anodised finish or oiled untreated steelHeight 75 cm (Body 60 cm + feet 15 cm)

95 cm (Body 80 cm + feet 15 cm)Design Dante Bonuccelli

Article W x D x H in cm

XSL1875P1 180 x 46 x 75

TIX Slideboard SL1875Specification with 2 sliding doors

1 adjustable shelf per section 1 box file height | weight 75 kg

XSL2475P1 240 x 46 x 75

TIX Slideboard SL2475Specification with 2 sliding doors

1 adjustable shelf per section 1 box file height | weight 95 kg

XSL1895P1 180 x 46 x 95

TIX Slideboard SL1895Specification with 2 sliding doors

2 adjustable shelves per section 2 box file height | weight 85 kg

XSL2495P1 240 x 46 x 95

TIX Slideboard SL2495Specification with 2 sliding doors

2 adjustable shelves per section 2 box file heigth | weight 115 kg

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

Extra charge Surface Body stained according to sample, per slideboard and colour 255 Body lacquered in accent colour or according to RAL/NCS, per slideboard and per colour 255Extra charge Locks Central lock for inner and outer sliding door 560

4520 5420 5675 6140 6500 7365

5235 6345 6645 7210 7650 8710

4990 6055 6335 6885 7285 8305

5875 7145 7470 8130 8615 9835

Retail in EURO excl. VAT

66

TIX Highboard

Body Outer face: Solid wood, lacquered, oiled or soaped | Inner face: salte black lacquered or outer and inner face: MDF lacquered with the same basic paint

Covering top Solid wood, selection, 40 mm thickness, with profiled gripsFront Brushed aluminium with natural anodised finish or untreated oiled steel

without visible back (extra charge see on page 73)Feet 2 rectangular supports, brushed aluminium natural anodised finish or oiled untreated steelHeight 95 cm (Body 80 cm + feet 15 cm)Design Dante Bonuccelli

Article W x D x H in cm

TIXHB3P1 120 x 46 x 95

TIX Highboard HB3Specification with 3 doors

2 adjustable shelves per section 2 box file heigth | weight 80 kg

TIXHB4P1 160 x 46 x 95

TIX Highboard HB4Specification with 4 doors

2 adjustable shelves per section 2 box file heigth | weight 100 kg

TIXHB5P1 200 x 46 x 95

TIX Highboard HB5Specification with 5 doors

2 adjustable shelves per section 2 box file heigth | weight 125 kg

TIXHB6P1 240 x 46 x 95

TIX Highboard HB6Specification with 6 doors

2 adjustable shelves per section 2 box file heigth | weight 160 kg

Entire bodylacquered (Basic colour)

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

Extra charge Surface Body stained according to sample, per sideboard and colour 255 Body lacquered in accent colour or according to RAL/NCS, per sideboard and per colour 255Extra charge Locks Central lock for all doors and drawers of the highboard with 1 lock barrel fitted at side at right (on request at left) Price per door 205 Price per drawer unit 365 for example: TIXSB3 2 doors and 1 drawer unit: 2 x EUR 205 + 1 x EUR 365 = EUR 775

4265 4905 5090 5440 5695 6335

5355 6085 6295 6710 7005 7765

6590 7410 7650 8145 8505 9395

7840 8395 9055 9510 10100 11135

67

Entire bodylacquered (Basic colour)

TIX Midboard

Body Outer face: Solid wood, lacquered, oiled or soaped | Inner face: slate black lacquered or outer and inner face: MDF lacquered with the same basic paint

Covering top Solid wood, selection, 40 mm thickness, with profiled gripsFront 1 x brushed aluminium with natural anodised finish or untreated oiled steel without visible back (extra charge see on page 73)Feet 2 rectangular supports, brushed aluminium natural anodised finish or oiled untreated steelHeight 55 cm (Body 40 cm + feet 15 cm)Design Dante Bonuccelli

Article W x D x H in cm

TIXMB11P1 120 x 46 x 55

TIX Midboard MB11Specification with 1 flap à 120 cm, 1 adjustable shelf per section

1 box file height | weight 60 kg

TIXMB12P1 120 x 46 x 55

TIX Midboard MB12Specification with 2 flaps à 60 cm, 1 adjustable shelf per section

1 box file height | Weight 60 kg

TIXMB22P1 180 x 46 x 55

TIX Midboard MB22Specification with 2 flaps à 90 cm, 1 adjustable shelf per section

1 box file height | weight 90 kg

TIXMB23P1 180 x 46 x 55

TIX Midboard MB23Specification with 3 flaps à 60 cm, 1 adjustable shelf per section

1 box file height | weight 90 kg

TIXMB32P1 240 x 46 x 55

TIX Midboard MB32Specification with 2 flaps à 120 cm, 1 adjustable shelf per section

1 box file height | weight 120 kg

TIXMB34P1 240 x 46 x 55

TIX Midboard MB34Specification with 4 flaps à 60 cm, 1 adjustable shelf per section

1 box file height | weight 120 kg

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

Extra charge Surface Body stained according to sample, per sideboard and colour 255 Body lacquered in accent colour or according to RAL/NCS, per sideboard and per colour 255Extra charge Locks Central lock for all doors and drawers of the highboard with 1 lock barrel fitted at side at right (on request at left) Price per flap or drawer 255Options Extra charge for drawer/s instead of flap/s, price for section width 60 cm/90 cm/120 cm 210/290/360

2355 2860 3000 3285 3485 3985

3050 3540 3675 3955 4160 4660

3600 4300 4485 4875 5145 5855

4325 5010 5200 5585 5865 6560

4255 5225 5475 5965 6430 7360

5650 6585 6830 7315 7780 8710

Retail in EURO excl. VAT

66

TIX Highboard

Body Outer face: Solid wood, lacquered, oiled or soaped | Inner face: salte black lacquered or outer and inner face: MDF lacquered with the same basic paint

Covering top Solid wood, selection, 40 mm thickness, with profiled gripsFront Brushed aluminium with natural anodised finish or untreated oiled steel

without visible back (extra charge see on page 73)Feet 2 rectangular supports, brushed aluminium natural anodised finish or oiled untreated steelHeight 95 cm (Body 80 cm + feet 15 cm)Design Dante Bonuccelli

Article W x D x H in cm

TIXHB3P1 120 x 46 x 95

TIX Highboard HB3Specification with 3 doors

2 adjustable shelves per section 2 box file heigth | weight 80 kg

TIXHB4P1 160 x 46 x 95

TIX Highboard HB4Specification with 4 doors

2 adjustable shelves per section 2 box file heigth | weight 100 kg

TIXHB5P1 200 x 46 x 95

TIX Highboard HB5Specification with 5 doors

2 adjustable shelves per section 2 box file heigth | weight 125 kg

TIXHB6P1 240 x 46 x 95

TIX Highboard HB6Specification with 6 doors

2 adjustable shelves per section 2 box file heigth | weight 160 kg

Entire bodylacquered (Basic colour)

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

Extra charge Surface Body stained according to sample, per sideboard and colour 255 Body lacquered in accent colour or according to RAL/NCS, per sideboard and per colour 255Extra charge Locks Central lock for all doors and drawers of the highboard with 1 lock barrel fitted at side at right (on request at left) Price per door 205 Price per drawer unit 365 for example: TIXSB3 2 doors and 1 drawer unit: 2 x EUR 205 + 1 x EUR 365 = EUR 775

4265 4905 5090 5440 5695 6335

5355 6085 6295 6710 7005 7765

6590 7410 7650 8145 8505 9395

7840 8395 9055 9510 10100 11135

67

Entire bodylacquered (Basic colour)

TIX Midboard

Body Outer face: Solid wood, lacquered, oiled or soaped | Inner face: slate black lacquered or outer and inner face: MDF lacquered with the same basic paint

Covering top Solid wood, selection, 40 mm thickness, with profiled gripsFront 1 x brushed aluminium with natural anodised finish or untreated oiled steel without visible back (extra charge see on page 73)Feet 2 rectangular supports, brushed aluminium natural anodised finish or oiled untreated steelHeight 55 cm (Body 40 cm + feet 15 cm)Design Dante Bonuccelli

Article W x D x H in cm

TIXMB11P1 120 x 46 x 55

TIX Midboard MB11Specification with 1 flap à 120 cm, 1 adjustable shelf per section

1 box file height | weight 60 kg

TIXMB12P1 120 x 46 x 55

TIX Midboard MB12Specification with 2 flaps à 60 cm, 1 adjustable shelf per section

1 box file height | Weight 60 kg

TIXMB22P1 180 x 46 x 55

TIX Midboard MB22Specification with 2 flaps à 90 cm, 1 adjustable shelf per section

1 box file height | weight 90 kg

TIXMB23P1 180 x 46 x 55

TIX Midboard MB23Specification with 3 flaps à 60 cm, 1 adjustable shelf per section

1 box file height | weight 90 kg

TIXMB32P1 240 x 46 x 55

TIX Midboard MB32Specification with 2 flaps à 120 cm, 1 adjustable shelf per section

1 box file height | weight 120 kg

TIXMB34P1 240 x 46 x 55

TIX Midboard MB34Specification with 4 flaps à 60 cm, 1 adjustable shelf per section

1 box file height | weight 120 kg

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

Extra charge Surface Body stained according to sample, per sideboard and colour 255 Body lacquered in accent colour or according to RAL/NCS, per sideboard and per colour 255Extra charge Locks Central lock for all doors and drawers of the highboard with 1 lock barrel fitted at side at right (on request at left) Price per flap or drawer 255Options Extra charge for drawer/s instead of flap/s, price for section width 60 cm/90 cm/120 cm 210/290/360

2355 2860 3000 3285 3485 3985

3050 3540 3675 3955 4160 4660

3600 4300 4485 4875 5145 5855

4325 5010 5200 5585 5865 6560

4255 5225 5475 5965 6430 7360

5650 6585 6830 7315 7780 8710

Retail in EURO excl. VAT

68

Entire bodylacquered (Basic colour)

TIX Wallboard

Body Outer face: Solid wood, lacquered, oiled or soaped | Inner face: slate black lacquered or outer and inner face: MDF lacquered with the same basic paint

Covering top Solid wood, selection, 40 mm thickness, with profiled gripsFront Brushed aluminium with natural anodised finish or untreated oiled steelWall fastening For the wall assembly is a very sturdy brick-work necessary.Design Dante Bonuccelli

Article W x D x H in cm

TIXWB11P1 120 x 51 x 40

TIX Wallboard WB11Specification 1with 1 flap à 120 cm, 1 adjustable shelf per section

1 box file height | weight 50 kgg

TIXWB12P1 120 x 51 x 40

TIX Wallboard WB12Specification with 2 flaps à 60 cm, 1 adjustable shelf per section

1 box file height | weight 50 kg

TIXWB22P1 180 x 51 x 40

TIX Wallboard WB22Specification with 2 flaps à 90 cm, 1 adjustable shelf per section

1 box file height | weight 75 kg

TIXWB23P1 180 x 51 x 40

TIX Wallboard WB23Specification with 3 flaps à 60 cm, 1 adjustable shelf per section

1 box file height | weight 75 kgg

TIXWB32P1 240 x 51 x 40

TIX Wallboard WB32Specification with 2 flaps à 120 cm, 1 adjustable shelf per section

1 box file height | weight 100 kg

TIXWB34P1 240 x 51 x 40

TIX Wallboard WB34Specification with 4 flaps à 60 cm, 1 adjustable shelf per section

1 box file height | Weight 100 kg

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

Extra charge Surface Body stained according to sample, per sideboard and colour 255 Body lacquered in accent colour or according to RAL/NCS, per sideboard and per colour 255Extra charge Locks Central lock for all doors and drawers of the highboard with 1 lock barrel fitted at side at right (on request at left) Price per flap or drawer 255Options Extra charge for drawer/s instead of flap/s, price for section width 60 cm/90 cm/120 cm 210/290/360

2355 2860 3000 3285 3485 3985

3050 3540 3675 3955 4160 4660

3600 4300 4485 4875 5145 5855

4325 5010 5200 5585 5865 6560

4255 5225 5475 5965 6430 7360

5650 6585 6830 7315 7780 8710

69

TIX Optionen | Home and Office

Visible backsVisible back in aluminium, natural anodised finish or untreated oiled steel for various TIX furniture

TIXSRWTIXSRWSL180TIXSRWSL240

Side- or HighboardSlideboard width 180 cmSlideboard width 240 cm

per sectionper Slideboardper Slideboard

Painted pull-out shelf TIXAZFA Side-, High- or Slideboard (section width 60 cm) 1 item

Inner drawersInnen drawers (behind doors) individually mounted (pre-drilled holes). 1 item Version: Sides in aluminium or untreated steel as the front, other parts lacquered in body colour

TIXIS1SBTIXIS40HBTIXIS80HBTIXIS90SLTIXIS90SLTIXIS60SLTIXIS60SLTIXIS60WBTIXIS90WBTIXIS120WB

SideboardHighboard section width 40 cmHighboard section width 80 cmSlideboard model 1875 section width 90 cmSlideboard model 1895 section width 90 cmSlideboard model 2475 section width 60 cmSlideboard model 2495 section width 60 cmWallboard section width 60 cmWallboard section width 90 cmWallboard section width 120 cm

up to 3 inner drawers possible per unit, dep. on height 1 itemup to 5 inner drawers possible per unit, dep. on height 1 itemup to 5 inner drawers possible per unit, dep. on height 1 itemup to 4 inner drawers possible per unit, dep. on height 1 itemup to 5 inner drawers possible per unit, dep. on height 1 itemup to 4 inner drawers possible per unit, dep. on height 1 itemup to 5 inner drawers possible per unit, dep. on height 1 item1 inner drawer per section 1 item1 inner drawer per section 1 item1 inner drawer per section 1 item

TIXFSSBTIX4FS40HBTIX5FS40HBTIX4FS80HBTIX5FS80HB

Sideboard, 3 front drawers, instead of 1 door Highboard, 4 front drawers section width 40 cm, instead of 1 door Highboard, 5 front drawers section width 40 cm, instead of 1 door Highboard, 4 front drawers section width 80 cm, instead of 1 doors Highboard, 5 front drawers section width 80 cm, instead of 1 doors

Non-standard front version

Aluminium fronts or backs, basic or accent paint or according to RAL/NCS, per front and per colourAluminium fronts brushed with black or bronze anodised finished, per front

TIXHRE metal black, as insert in internal drawer/front drawer 1 insert

A4 suspended file (insert only, not incl. drawer)Section width 60 cm: 1 insert per drawer Section width 80 cm: 2 inserts per drawerSection width 120 cm: 3 inserts per drawer

Front set drawers (only possible as outside end units)Fully extendable and self closing Price per section Version: Sides in aluminium or untreated steel as the front, other parts lacquered in body colour

Painted shelf (price added or deducted)

TIXFA Side-, High- or Slideboard (section width 60 cm)Side-, High- or Slideboard (section width 90 cm)Wall- or Midboard (section width 120 cm)

1 item1 item1 item

46012451595

330

530485585615615530530530615665

110

9301210153513601695

160150

7590

110

Retail in EURO excl. VAT

68

Entire bodylacquered (Basic colour)

TIX Wallboard

Body Outer face: Solid wood, lacquered, oiled or soaped | Inner face: slate black lacquered or outer and inner face: MDF lacquered with the same basic paint

Covering top Solid wood, selection, 40 mm thickness, with profiled gripsFront Brushed aluminium with natural anodised finish or untreated oiled steelWall fastening For the wall assembly is a very sturdy brick-work necessary.Design Dante Bonuccelli

Article W x D x H in cm

TIXWB11P1 120 x 51 x 40

TIX Wallboard WB11Specification 1with 1 flap à 120 cm, 1 adjustable shelf per section

1 box file height | weight 50 kgg

TIXWB12P1 120 x 51 x 40

TIX Wallboard WB12Specification with 2 flaps à 60 cm, 1 adjustable shelf per section

1 box file height | weight 50 kg

TIXWB22P1 180 x 51 x 40

TIX Wallboard WB22Specification with 2 flaps à 90 cm, 1 adjustable shelf per section

1 box file height | weight 75 kg

TIXWB23P1 180 x 51 x 40

TIX Wallboard WB23Specification with 3 flaps à 60 cm, 1 adjustable shelf per section

1 box file height | weight 75 kgg

TIXWB32P1 240 x 51 x 40

TIX Wallboard WB32Specification with 2 flaps à 120 cm, 1 adjustable shelf per section

1 box file height | weight 100 kg

TIXWB34P1 240 x 51 x 40

TIX Wallboard WB34Specification with 4 flaps à 60 cm, 1 adjustable shelf per section

1 box file height | Weight 100 kg

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

Extra charge Surface Body stained according to sample, per sideboard and colour 255 Body lacquered in accent colour or according to RAL/NCS, per sideboard and per colour 255Extra charge Locks Central lock for all doors and drawers of the highboard with 1 lock barrel fitted at side at right (on request at left) Price per flap or drawer 255Options Extra charge for drawer/s instead of flap/s, price for section width 60 cm/90 cm/120 cm 210/290/360

2355 2860 3000 3285 3485 3985

3050 3540 3675 3955 4160 4660

3600 4300 4485 4875 5145 5855

4325 5010 5200 5585 5865 6560

4255 5225 5475 5965 6430 7360

5650 6585 6830 7315 7780 8710

69

TIX Optionen | Home and Office

Visible backsVisible back in aluminium, natural anodised finish or untreated oiled steel for various TIX furniture

TIXSRWTIXSRWSL180TIXSRWSL240

Side- or HighboardSlideboard width 180 cmSlideboard width 240 cm

per sectionper Slideboardper Slideboard

Painted pull-out shelf TIXAZFA Side-, High- or Slideboard (section width 60 cm) 1 item

Inner drawersInnen drawers (behind doors) individually mounted (pre-drilled holes). 1 item Version: Sides in aluminium or untreated steel as the front, other parts lacquered in body colour

TIXIS1SBTIXIS40HBTIXIS80HBTIXIS90SLTIXIS90SLTIXIS60SLTIXIS60SLTIXIS60WBTIXIS90WBTIXIS120WB

SideboardHighboard section width 40 cmHighboard section width 80 cmSlideboard model 1875 section width 90 cmSlideboard model 1895 section width 90 cmSlideboard model 2475 section width 60 cmSlideboard model 2495 section width 60 cmWallboard section width 60 cmWallboard section width 90 cmWallboard section width 120 cm

up to 3 inner drawers possible per unit, dep. on height 1 itemup to 5 inner drawers possible per unit, dep. on height 1 itemup to 5 inner drawers possible per unit, dep. on height 1 itemup to 4 inner drawers possible per unit, dep. on height 1 itemup to 5 inner drawers possible per unit, dep. on height 1 itemup to 4 inner drawers possible per unit, dep. on height 1 itemup to 5 inner drawers possible per unit, dep. on height 1 item1 inner drawer per section 1 item1 inner drawer per section 1 item1 inner drawer per section 1 item

TIXFSSBTIX4FS40HBTIX5FS40HBTIX4FS80HBTIX5FS80HB

Sideboard, 3 front drawers, instead of 1 door Highboard, 4 front drawers section width 40 cm, instead of 1 door Highboard, 5 front drawers section width 40 cm, instead of 1 door Highboard, 4 front drawers section width 80 cm, instead of 1 doors Highboard, 5 front drawers section width 80 cm, instead of 1 doors

Non-standard front version

Aluminium fronts or backs, basic or accent paint or according to RAL/NCS, per front and per colourAluminium fronts brushed with black or bronze anodised finished, per front

TIXHRE metal black, as insert in internal drawer/front drawer 1 insert

A4 suspended file (insert only, not incl. drawer)Section width 60 cm: 1 insert per drawer Section width 80 cm: 2 inserts per drawerSection width 120 cm: 3 inserts per drawer

Front set drawers (only possible as outside end units)Fully extendable and self closing Price per section Version: Sides in aluminium or untreated steel as the front, other parts lacquered in body colour

Painted shelf (price added or deducted)

TIXFA Side-, High- or Slideboard (section width 60 cm)Side-, High- or Slideboard (section width 90 cm)Wall- or Midboard (section width 120 cm)

1 item1 item1 item

46012451595

330

530485585615615530530530615665

110

9301210153513601695

160150

7590

110

Retail in EURO excl. VAT

70

PC

TIX Options

Candle holder

Holder for 5 candles or flowers (incl. test tubes)

TIXKHTIXKHSW

32 x 3 x 1132 x 3 x 11

Solid aluminium, brushed with natural anodised finishSolid aluminium brushed with bronze or black anodised finish

1 item1 item

Black leather desk blotterThere are two versions of the leather writing surface: rectangular (70 x 45 cm) or rectangular with angled edge (70 x 40 cm)

LPRELPREW

70 x 4570 x 40

1 item1 item

Rectangular Rectangular with angled edge

Equipment ventilationWith active ventilation unit which prevents heat accumulation, and therefore damage to equipment and furniture. Definitely recommended if computers, routers or other equipment are placed on the furniture. A USB connection is required for the power supply.

XLE 1 item

XSTB3XSTBB3STL

XSTB4XSTBB4STL

Aluminium brushed natural anodised finishAluminium brushed bronze or black anodised finish2 bars configurated as requested

Aluminium brushed natural anodised finishAluminium brushed bronze or black anodised finish2 bars configurated as requested

1 item1 item

1 item1 item

on demand

on demand

TIX Electrification

Power outlet Netbox M3 (only for insertion into center) The power box consists of 3 plug-ins per side (total 6 plug-ins), 2 power bars standard. Cables can reach the plug-ins without difficulty through the slot on the underside of the box. The Table Central Spacing of the TIX Table serves to channel the cables. Standard grounded: each side 3 x plug-ins, including 3 m connecting cable

Power outlet Netbox M4 (only for insertion into center) The power box consists of 4 plug-ins per side (total 8 plug-ins), 2 power bars standard. Cables can reach the plug-ins without difficulty through the slot on the underside of the box. The Table Central Spacing of the TIX Table serves to channel the cables. Standard grounded: each side 4 x plug-ins, including 3 m connecting cable

265340

435520

255

9051040

9901135

71

1 item

XELLAXELLABXELLRSTL

Aluminium brushed with natural anodised finishAluminium brushed with bronze or black anodised finish Oiled untreated steel 1 bar configurated as requested

1 item1 item1 item

ELAELABSTL

Aluminium natural brushed with anodised finishAluminium brushed with bronze or black anodised1 bar configurated as requested

1 item1 item

on demand

on demand

STWA1STWAB1STWRG1STWML1STL

1 item1 item1 item1 item

Lid in aluminium brushed with natural anodised finishLid in aluminium brushed with bronze or black anodised finish Lid in oiled untreated steel or chromium-platedLid in solid wood or leather black1 bar configurated as requested Lid only, WITHOUT box and sockets, reduced price

on demand

STWA2STWAB2STWRG2STWML2STL

1 item1 item1 item1 item

Lid in aluminium brushed with natural anodised finishLid in aluminium brushed with bronze or black anodised finish Lid in oiled untreated steel or chromium-platedLid in solid wood or leather black2 bars configurated as requested Lid only, WITHOUT box and sockets, reduced price

on demand

Pull out electrical boxRecommended for all desk, work and conference tables. Mounted under the top and can be pulled out when needed. Can be fitted with 4 plug inserts. Standard configuration: 4 x powerIncluding 3 m connecting cable

Power outlet box with hinged lid (one side useable)Recommended for all conference tables for multiple media plug-ins. Cut out with hinged lid in different versions.Recessed power bar holder in black finish with 4 plug-ins.Cut out size in table top approx. 25 x 12 cm.Standard configuration: 2 x power, 2 x blankConnecting cable not included

Power outlet box with hinged lid (both sides useable)

Recommended for all conference tables for multiple media plug-ins. Cut out with hinged lid in different versions.Recessed power bar holder in black finish with 4 and 4 plug-ins.Cut out size in table top approx. 25 x 12 cm.Standard configuration per side: 2 x power, 2 x blankConnecting cable not included

Lateral electric power supply box (end of table, at the side)The lateral electric power supply box is a socket element fitted at the end of the table, at the side (power via body or Lowboard). The box lid can be opened to the side. It contains 4 cut-outs for the power supply.Standard configuration: 4 x power, including 3 m power cable

870101510551075

-160

810970

96511101615

1010115511701235

-290

Retail in EURO excl. VAT

70

PC

TIX Options

Candle holder

Holder for 5 candles or flowers (incl. test tubes)

TIXKHTIXKHSW

32 x 3 x 1132 x 3 x 11

Solid aluminium, brushed with natural anodised finishSolid aluminium brushed with bronze or black anodised finish

1 item1 item

Black leather desk blotterThere are two versions of the leather writing surface: rectangular (70 x 45 cm) or rectangular with angled edge (70 x 40 cm)

LPRELPREW

70 x 4570 x 40

1 item1 item

Rectangular Rectangular with angled edge

Equipment ventilationWith active ventilation unit which prevents heat accumulation, and therefore damage to equipment and furniture. Definitely recommended if computers, routers or other equipment are placed on the furniture. A USB connection is required for the power supply.

XLE 1 item

XSTB3XSTBB3STL

XSTB4XSTBB4STL

Aluminium brushed natural anodised finishAluminium brushed bronze or black anodised finish2 bars configurated as requested

Aluminium brushed natural anodised finishAluminium brushed bronze or black anodised finish2 bars configurated as requested

1 item1 item

1 item1 item

on demand

on demand

TIX Electrification

Power outlet Netbox M3 (only for insertion into center) The power box consists of 3 plug-ins per side (total 6 plug-ins), 2 power bars standard. Cables can reach the plug-ins without difficulty through the slot on the underside of the box. The Table Central Spacing of the TIX Table serves to channel the cables. Standard grounded: each side 3 x plug-ins, including 3 m connecting cable

Power outlet Netbox M4 (only for insertion into center) The power box consists of 4 plug-ins per side (total 8 plug-ins), 2 power bars standard. Cables can reach the plug-ins without difficulty through the slot on the underside of the box. The Table Central Spacing of the TIX Table serves to channel the cables. Standard grounded: each side 4 x plug-ins, including 3 m connecting cable

265340

435520

255

9051040

9901135

71

1 item

XELLAXELLABXELLRSTL

Aluminium brushed with natural anodised finishAluminium brushed with bronze or black anodised finish Oiled untreated steel 1 bar configurated as requested

1 item1 item1 item

ELAELABSTL

Aluminium natural brushed with anodised finishAluminium brushed with bronze or black anodised1 bar configurated as requested

1 item1 item

on demand

on demand

STWA1STWAB1STWRG1STWML1STL

1 item1 item1 item1 item

Lid in aluminium brushed with natural anodised finishLid in aluminium brushed with bronze or black anodised finish Lid in oiled untreated steel or chromium-platedLid in solid wood or leather black1 bar configurated as requested Lid only, WITHOUT box and sockets, reduced price

on demand

STWA2STWAB2STWRG2STWML2STL

1 item1 item1 item1 item

Lid in aluminium brushed with natural anodised finishLid in aluminium brushed with bronze or black anodised finish Lid in oiled untreated steel or chromium-platedLid in solid wood or leather black2 bars configurated as requested Lid only, WITHOUT box and sockets, reduced price

on demand

Pull out electrical boxRecommended for all desk, work and conference tables. Mounted under the top and can be pulled out when needed. Can be fitted with 4 plug inserts. Standard configuration: 4 x powerIncluding 3 m connecting cable

Power outlet box with hinged lid (one side useable)Recommended for all conference tables for multiple media plug-ins. Cut out with hinged lid in different versions.Recessed power bar holder in black finish with 4 plug-ins.Cut out size in table top approx. 25 x 12 cm.Standard configuration: 2 x power, 2 x blankConnecting cable not included

Power outlet box with hinged lid (both sides useable)

Recommended for all conference tables for multiple media plug-ins. Cut out with hinged lid in different versions.Recessed power bar holder in black finish with 4 and 4 plug-ins.Cut out size in table top approx. 25 x 12 cm.Standard configuration per side: 2 x power, 2 x blankConnecting cable not included

Lateral electric power supply box (end of table, at the side)The lateral electric power supply box is a socket element fitted at the end of the table, at the side (power via body or Lowboard). The box lid can be opened to the side. It contains 4 cut-outs for the power supply.Standard configuration: 4 x power, including 3 m power cable

870101510551075

-160

810970

96511101615

1010115511701235

-290

Retail in EURO excl. VAT

72

Cable shoe Is attached to the table edge and holds and also conceals cables. Only suitable for 40 mm thickness.

XKSXKSBXKSR

Aluminium brushed with natural anodised finishAluminium brushed with bronze or black anodised finish Oiled untreated steel

1 item1 item1 item

Cable channel set (horizontal)Attached directly under the table top to carry cables, made from perforated black sheet metal, and is the same length as the table top. 1 set consists of 3 sections à 50 cm

KK6 X x 6 x 3 1 setperforated black sheet metal

Cable channel (horizontal)Channel for TIX rectangular bases. The cable channel is attached with a connec-ting piece of the same length as the base (X). To access the cable channel, the center joint can be opened to 6.5 cm by sliding one half of the top away from the other, after installation, the gap can closed again to 12 mm.

XKKHXVP

55 x 15 x 7—

Sheet metal aluminium coloured or black finish, as per baseExtra charge for sliding half section of table top (per table)

1 item

Connecting unitFixed connection between body and table top in MDF aluminium coloured or black finish (without electrical wiring), including hidden cable channel through the body under the table top. This element is only available as supplementary parts for TIX desk (page 63).

XAB MDF aluminium coloured or black finish 1 item

XELAXELABXELRGXELMLSTL

1 item1 item1 item1 item

Lid in aluminium brushed with natural anodised finishLid in aluminium brushed with bronze or black anodised finishLid in oiled untreated steel or chromium-platedLid in solid wood or leather black2 bars configurated as requested on demand

TIX Cable guide

Electrical box

In combination with the TIX body. The box acts as a connecting unit between the body and the Table Top. The electrical wiring passes through the body. The box is accessible from above via its hinged lid and contains 3 cut-outs for the wiring. Standard: 2 x plug-ins. Including 3 m connecting cable. This price is an extra charge and therefore only applies for this additional unit in the combination. Cut-out size in table top 24 x 12 cm.

9001050990

1120

430565785

180

395430

0

73

Cable channel (for the inner side)Can be combined with the TIX horizontal cable channel and can be attached to the TIX rectangular bases. Serves as the cable access | cable covering.

XKKV 64 x 16 x 5 Sheet metal aluminium coloured or black finish, as per base 1 item

Cable channel (for the outer side)Can be combined with the TIX horizontal cable channel and can be attached to the TIX rectangular bases. Serves as the cable access | cable covering.Including cutout in side paneld for cable.

XKKVAXKKVABXKKVAR

64 x 16 x 564 x 16 x 564 x 16 x 5

Aluminium brushed with natural anodised finishAluminium brushed with bronze or black anodised finishOilled untreated steel

1 item1 item1 item

215

435570350

Retail in EURO excl. VAT

72

Cable shoe Is attached to the table edge and holds and also conceals cables. Only suitable for 40 mm thickness.

XKSXKSBXKSR

Aluminium brushed with natural anodised finishAluminium brushed with bronze or black anodised finish Oiled untreated steel

1 item1 item1 item

Cable channel set (horizontal)Attached directly under the table top to carry cables, made from perforated black sheet metal, and is the same length as the table top. 1 set consists of 3 sections à 50 cm

KK6 X x 6 x 3 1 setperforated black sheet metal

Cable channel (horizontal)Channel for TIX rectangular bases. The cable channel is attached with a connec-ting piece of the same length as the base (X). To access the cable channel, the center joint can be opened to 6.5 cm by sliding one half of the top away from the other, after installation, the gap can closed again to 12 mm.

XKKHXVP

55 x 15 x 7—

Sheet metal aluminium coloured or black finish, as per baseExtra charge for sliding half section of table top (per table)

1 item

Connecting unitFixed connection between body and table top in MDF aluminium coloured or black finish (without electrical wiring), including hidden cable channel through the body under the table top. This element is only available as supplementary parts for TIX desk (page 63).

XAB MDF aluminium coloured or black finish 1 item

XELAXELABXELRGXELMLSTL

1 item1 item1 item1 item

Lid in aluminium brushed with natural anodised finishLid in aluminium brushed with bronze or black anodised finishLid in oiled untreated steel or chromium-platedLid in solid wood or leather black2 bars configurated as requested on demand

TIX Cable guide

Electrical box

In combination with the TIX body. The box acts as a connecting unit between the body and the Table Top. The electrical wiring passes through the body. The box is accessible from above via its hinged lid and contains 3 cut-outs for the wiring. Standard: 2 x plug-ins. Including 3 m connecting cable. This price is an extra charge and therefore only applies for this additional unit in the combination. Cut-out size in table top 24 x 12 cm.

9001050990

1120

430565785

180

395430

0

73

Cable channel (for the inner side)Can be combined with the TIX horizontal cable channel and can be attached to the TIX rectangular bases. Serves as the cable access | cable covering.

XKKV 64 x 16 x 5 Sheet metal aluminium coloured or black finish, as per base 1 item

Cable channel (for the outer side)Can be combined with the TIX horizontal cable channel and can be attached to the TIX rectangular bases. Serves as the cable access | cable covering.Including cutout in side paneld for cable.

XKKVAXKKVABXKKVAR

64 x 16 x 564 x 16 x 564 x 16 x 5

Aluminium brushed with natural anodised finishAluminium brushed with bronze or black anodised finishOilled untreated steel

1 item1 item1 item

215

435570350

Retail in EURO excl. VAT

76 - 77

78

79 - 81

82

83 - 85

2

Rectangular table

Round table + Lazy Susan

Storage furniture

Desk body

Options

76 - 77

78

79 - 81

82

83 - 85

2

Rectangular table

Round table + Lazy Susan

Storage furniture

Desk body

Options

76

X2 Rectangular table | Selection

Top Solid wood, selection, 28 mm thicknessEdge K60 or K63 Edge detail Radius 1 or 5 cmSurface lacquered, oiled or soapedBase Legs and connecting supports in solid wood, the same as the

table top and 2 nodules in cast metal, textured metallic finish in 4 colours: sand, rust, anthracite or silver

Design Dante Bonuccelli

Article Table area m²L x W x H in cm

Surface difference per m² for non-standard sizes

X2RE180X2RE190X2RE200X2RE210X2RE220X2RE230X2RE240X2RE250X2RE260X2RE270X2RE280X2RE290X2RE300

180 x 90 x 74190 x 100 x 74200 x 100 x 74210 x 100 x 74220 x 100 x 74230 x 100 x 74240 x 100 x 74250 x 100 x 74260 x 100 x 74270 x 100 x 74280 x 100 x 74290 x 100 x 74300 x 100 x 74

1.621.902.002.102.202.302.402.502.602.702.802.903.00

Attention:Lengths over 300 cm need 6 feet for stability and must be calculated with the prices mentioned below.Widths over 110 cm are fitted with the X2 with „frame base“; price must be calculated as per page 81.

X2 Rectangular table | Selection

Top Solid wood, selection, 28 mm thicknessEdge K60 or K63 Edge detail Radius 1 or 5 cmSurface lacquered, oiled or soapedBase Legs and connecting supports in solid wood, the same as

the table top and 3 nodules in cast metal, textured metallic finish in 4 colours: sand, rust, anthracite or silver

Design Dante Bonuccelli

Article Table area m²L x W x H in cm

Surface difference per m² for non-standard sizes

X2RE320X2RE340X2RE360X2RE380X2RE400X2RE420X2RE440X2RE460X2RE480

320 x 100 x 74340 x 100 x 74360 x 100 x 74380 x 100 x 74400 x 100 x 74420 x 100 x 74440 x 100 x 74460 x 100 x 74480 x 100 x 74

3.203.403.603.804.004.204.404.604.80

Attention:Lengths over 480 cm and widths over 100 cm are fitted with the „Frames“-X2 Base; price must be calculated as per page 81.

BeechHeartwood

ash Heartwood ashblack stained

BeechHeartwood

ash Heartwood ashblack stained

SycamoreElm | Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

SycamoreElm | Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

* On demand with relation to availability of wood and top cutting

Extra charge Surface Table top and wooden parts of the base stained according to sample, per table and per colour 255Extra charge Base Nodules lacquered in basic or accent colour or according to RAL/NCS, per base and per colour 255

3875 4065 4460 4845 56504245 4460 4935 5395 63454380 4615 5120 5610 65954510 4755 5275 5810 68704660 4920 5470 6035 71454785 5055 5630 6290 74654935 5225 5830 6520 77405060 5360 6000 6740 80205250 5575 6235 7025 83655445 5780 6485 7310 87255640 6000 6735 7650 91405835 6265 6980 7940 94256010 6460 7200 8205 97651040 1175 1400 1500 1825

8890 9335 10200 11350 131059255 9750 10655 11960 138609640 10180 11140 12595 14630

10015 10610 11620 13240 15435*10400 *11030 *12100 *13915 *16260*10790 *11465 *12600 *14595 *17105*11185 *11910 *13105 *15315 *17985*11580 *12360 *13605 *16045 *18890*11975 *12810 *14110 *16795 *19805

1040 1175 1400 1500 1825

77

X2 Rectangular table with under frame | Selection

Top Solid wood, selection, 28 mm thicknessEdge K60 or K63 Edge detail Radius 1 or 5 cmSurfaces lacquered, oiled or soapedBase Legs in solid wood, the same as the table top.

4 individual nodules in cast metal, with steel plate connectors, textured metallic finish in 4 colours: sand, rust, anthracite and silver

Design Dante Bonuccelli

Article Table area m²L x W x H in cm

Surface difference per m² for non-standard sizes

X2REX240X2REX250X2REX260X2REX270X2REX280

240 x 120 x 74250 x 125 x 74260 x 130 x 74270 x 135 x 74280 x 140 x 74

2.883.133.383.653.92

Attention:Lengths over 280 cm need 6 feet for stability and must be calculated with the prices mentioned below.

X2 Rectangular table with under frame | Selection

Top Solid wood, selection, 28 mm thicknessEdge K60 or K63 Edge detail Radius 1 or 5 cmSurface lacquered, oiled or soapedBase Legs in solid wood, the same as the table top.

6 or 8 individual nodules in cast metal, with steel plate connectors, textured metallic finish in 4 colours: sand, rust, anthracite and silver

Design Dante Bonuccelli

Article Table area m²L x W x H in cm

Surface difference per m² for non-standard sizes

X2REX300X2REX320X2REX340X2REX360X2REX380X2REX400X2REX420X2REX440X2REX460X2REX480X2REX500X2REX520X2REX540X2REX560X2REX580

300 x 130 x 74320 x 130 x 74340 x 130 x 74360 x 135 x 74380 x 135 x 74400 x 135 x 74420 x 135 x 74440 x 140 x 74460 x 140 x 74480 x 140 x 74500 x 145 x 74520 x 145 x 74540 x 145 x 74560 x 145 x 74580 x 150 x 74

3.904.164.424.865.135.405.676.166.446.727.257.547.838.128.70

6 feet6 feet6 feet6 feet6 feet6 feet6 feet6 feet6 feet6 feet8 feet8 feet8 feet8 feet8 feet

BeechHeartwood

ash Heartwood ashblack stained

BeechHeartwood

ash Heartwood ashblack stained

SycamoreElm | Maple

Ash

SycamoreElm | Maple

Ash

CherryOak

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

* On demand with relation to availability of wood and top cutting

Extra charge Surface Table top and wooden parts of the base stained according to sample, per table and per colour 255Extra charge Base Nodules lacquered in accent colour or according to RAL/NCS, per base and per colour 255

6570 6990 7635 8445 98356925 7365 8090 8985 105007295 7785 8560 9570 112107925 8475 9305 10420 122108340 8935 9830 11070 130051040 1175 1400 1500 1825

10335 10915 11860 13185 1521010880 11525 12540 14035 1624011450 12135 13230 14900 1728512620 13395 14590 16545 1921013215 14055 15320 17495 20365

*13790 *14705 *16060 *18485 *21550*14400 *15375 *16795 *19490 *22775*15350 *16450 *18000 *21075 *24715*15995 *17145 *18790 *22185 *26060*16630 *17845 *19565 *23300 *27430*17655 *18980 *20820 *25125 *29645*18215 *19625 *21535 *26285 *31065*18785 *20260 *22270 *27470 *32520*19365 *20915 *23000 *28680 *34010*20430 *22115 *24350 *30730 *36545

1040 1175 1400 1500 1825

Retail in EURO excl. VAT

76

X2 Rectangular table | Selection

Top Solid wood, selection, 28 mm thicknessEdge K60 or K63 Edge detail Radius 1 or 5 cmSurface lacquered, oiled or soapedBase Legs and connecting supports in solid wood, the same as the

table top and 2 nodules in cast metal, textured metallic finish in 4 colours: sand, rust, anthracite or silver

Design Dante Bonuccelli

Article Table area m²L x W x H in cm

Surface difference per m² for non-standard sizes

X2RE180X2RE190X2RE200X2RE210X2RE220X2RE230X2RE240X2RE250X2RE260X2RE270X2RE280X2RE290X2RE300

180 x 90 x 74190 x 100 x 74200 x 100 x 74210 x 100 x 74220 x 100 x 74230 x 100 x 74240 x 100 x 74250 x 100 x 74260 x 100 x 74270 x 100 x 74280 x 100 x 74290 x 100 x 74300 x 100 x 74

1.621.902.002.102.202.302.402.502.602.702.802.903.00

Attention:Lengths over 300 cm need 6 feet for stability and must be calculated with the prices mentioned below.Widths over 110 cm are fitted with the X2 with „frame base“; price must be calculated as per page 81.

X2 Rectangular table | Selection

Top Solid wood, selection, 28 mm thicknessEdge K60 or K63 Edge detail Radius 1 or 5 cmSurface lacquered, oiled or soapedBase Legs and connecting supports in solid wood, the same as

the table top and 3 nodules in cast metal, textured metallic finish in 4 colours: sand, rust, anthracite or silver

Design Dante Bonuccelli

Article Table area m²L x W x H in cm

Surface difference per m² for non-standard sizes

X2RE320X2RE340X2RE360X2RE380X2RE400X2RE420X2RE440X2RE460X2RE480

320 x 100 x 74340 x 100 x 74360 x 100 x 74380 x 100 x 74400 x 100 x 74420 x 100 x 74440 x 100 x 74460 x 100 x 74480 x 100 x 74

3.203.403.603.804.004.204.404.604.80

Attention:Lengths over 480 cm and widths over 100 cm are fitted with the „Frames“-X2 Base; price must be calculated as per page 81.

BeechHeartwood

ash Heartwood ashblack stained

BeechHeartwood

ash Heartwood ashblack stained

SycamoreElm | Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

SycamoreElm | Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

* On demand with relation to availability of wood and top cutting

Extra charge Surface Table top and wooden parts of the base stained according to sample, per table and per colour 255Extra charge Base Nodules lacquered in basic or accent colour or according to RAL/NCS, per base and per colour 255

3875 4065 4460 4845 56504245 4460 4935 5395 63454380 4615 5120 5610 65954510 4755 5275 5810 68704660 4920 5470 6035 71454785 5055 5630 6290 74654935 5225 5830 6520 77405060 5360 6000 6740 80205250 5575 6235 7025 83655445 5780 6485 7310 87255640 6000 6735 7650 91405835 6265 6980 7940 94256010 6460 7200 8205 97651040 1175 1400 1500 1825

8890 9335 10200 11350 131059255 9750 10655 11960 138609640 10180 11140 12595 14630

10015 10610 11620 13240 15435*10400 *11030 *12100 *13915 *16260*10790 *11465 *12600 *14595 *17105*11185 *11910 *13105 *15315 *17985*11580 *12360 *13605 *16045 *18890*11975 *12810 *14110 *16795 *19805

1040 1175 1400 1500 1825

77

X2 Rectangular table with under frame | Selection

Top Solid wood, selection, 28 mm thicknessEdge K60 or K63 Edge detail Radius 1 or 5 cmSurfaces lacquered, oiled or soapedBase Legs in solid wood, the same as the table top.

4 individual nodules in cast metal, with steel plate connectors, textured metallic finish in 4 colours: sand, rust, anthracite and silver

Design Dante Bonuccelli

Article Table area m²L x W x H in cm

Surface difference per m² for non-standard sizes

X2REX240X2REX250X2REX260X2REX270X2REX280

240 x 120 x 74250 x 125 x 74260 x 130 x 74270 x 135 x 74280 x 140 x 74

2.883.133.383.653.92

Attention:Lengths over 280 cm need 6 feet for stability and must be calculated with the prices mentioned below.

X2 Rectangular table with under frame | Selection

Top Solid wood, selection, 28 mm thicknessEdge K60 or K63 Edge detail Radius 1 or 5 cmSurface lacquered, oiled or soapedBase Legs in solid wood, the same as the table top.

6 or 8 individual nodules in cast metal, with steel plate connectors, textured metallic finish in 4 colours: sand, rust, anthracite and silver

Design Dante Bonuccelli

Article Table area m²L x W x H in cm

Surface difference per m² for non-standard sizes

X2REX300X2REX320X2REX340X2REX360X2REX380X2REX400X2REX420X2REX440X2REX460X2REX480X2REX500X2REX520X2REX540X2REX560X2REX580

300 x 130 x 74320 x 130 x 74340 x 130 x 74360 x 135 x 74380 x 135 x 74400 x 135 x 74420 x 135 x 74440 x 140 x 74460 x 140 x 74480 x 140 x 74500 x 145 x 74520 x 145 x 74540 x 145 x 74560 x 145 x 74580 x 150 x 74

3.904.164.424.865.135.405.676.166.446.727.257.547.838.128.70

6 feet6 feet6 feet6 feet6 feet6 feet6 feet6 feet6 feet6 feet8 feet8 feet8 feet8 feet8 feet

BeechHeartwood

ash Heartwood ashblack stained

BeechHeartwood

ash Heartwood ashblack stained

SycamoreElm | Maple

Ash

SycamoreElm | Maple

Ash

CherryOak

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

* On demand with relation to availability of wood and top cutting

Extra charge Surface Table top and wooden parts of the base stained according to sample, per table and per colour 255Extra charge Base Nodules lacquered in accent colour or according to RAL/NCS, per base and per colour 255

6570 6990 7635 8445 98356925 7365 8090 8985 105007295 7785 8560 9570 112107925 8475 9305 10420 122108340 8935 9830 11070 130051040 1175 1400 1500 1825

10335 10915 11860 13185 1521010880 11525 12540 14035 1624011450 12135 13230 14900 1728512620 13395 14590 16545 1921013215 14055 15320 17495 20365

*13790 *14705 *16060 *18485 *21550*14400 *15375 *16795 *19490 *22775*15350 *16450 *18000 *21075 *24715*15995 *17145 *18790 *22185 *26060*16630 *17845 *19565 *23300 *27430*17655 *18980 *20820 *25125 *29645*18215 *19625 *21535 *26285 *31065*18785 *20260 *22270 *27470 *32520*19365 *20915 *23000 *28680 *34010*20430 *22115 *24350 *30730 *36545

1040 1175 1400 1500 1825

Retail in EURO excl. VAT

78

X2 Round table | Selection

Top Solid wood, selection, 28 mm thicknessEdge K 60 or K63 Surface lacquered, oiled or soapedBase Legs in solid wood, the same as the table top. Nodules in

cast metal with a steel plate connecting ring, textured metallic finish in 4 colours: sand, rust, anthracite and silver

Design Dante Bonuccelli

Minimum diameter: 115 cm

Article Table area m² x H in cm

Surface difference per m² for non-standard sizes

X2RD130X2RD140X2RD150X2RD160X2RD170X2RD180

1.691.962.252.562.893.24

4 feet4 feet4 feet5 feet5 feet5 feet

130 x 74 140 x 74 150 x 74 160 x 74 170 x 74 180 x 74

BeechHeartwood

ash Heartwood ashblack stained

SycamoreElm | Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

TopEdgeSurfaceBase

Lazy Suzan

Revolving food tray

Solid wood, selection, 22 mm dickTapered edge profile around entire circumferencelacquered, oiled or soaped Aluminium baseboard with lug for solid wood tray

Article

LS 620LS 700LS 750LS 800LS 900

62 cm 70 cm 75 cm 80 cm 90 cm

in cmPaint finish

Basic colourBeech

Heartwood ashHeartwood ashblack stained

SycamoreElm | Maple

Ash

CherryOak

Pear WalnutBlack Walnut

without sapwoodBlack Walnut

with sapwood

Additional top shapes (elliptical, boat-shaped) are available on demand.

Extra charge Surface Table top and wooden parts of the base stained according to sample, per table and per colour 255Extra charge Base Nodules lacquered in basic or accent colour or according to RAL/NCS, per base and per colour 255

5010 5200 5600 5870 66155650 5885 6335 6635 74956000 6265 6775 7160 81306955 7265 7845 8315 94507360 7720 8375 8920 102007815 8230 8950 9635 110701040 1175 1400 1500 1825

960 1010 1060 1135 1170 13201055 - - - - -1140 - - - - -1285 - - - - -1525 - - - - -

79

X2 Longboard

Outer body Solid wood, selection, 24 mm thicknessEdge K 60 or K63 Surface lacquered, oiled or soapedBack Textured metallic paint in 4 colours, sand, rust, anthracite and silverInner body Textured metallic paint in 4 colours, sand, rust, anthracite and silver.

2 drawers. Drawer body left or right possible, must be specified.Drawer Wood | black leatherFront Textured metallic paint in 4 colours: sand, rust, anthracite and silverBase with black set-back hidden under frame (height 4 cm); or with set-back

under frame (height 12 cm), both textured metallic finish in 4 colours: sand, rust, anthracite or silver

Design Dante Bonuccelli

Article FrontW x D x H in cm

X2LO130P1 130 x 46 x 46 (+ Sockel) Tex. metallic finish

Model with 12 cm underframe, should be securely attached to the wall from the middle of the back so that it does not tip forward when a full drawer is opened.

X2LO190P1 190 x 46 x 46 (+ Sockel) Tex. metallic finish

X2 Longboard X2LO190 2 Drawers right or left +

1 open section right or left 1 box file height | weight: 70 kg

X2 Longboard X2LO130 2 Drawers right or left +

1 open section right or left 1 box file height | weight: 50 kg

X2LO250P1 250 x 46 x 46 (+ Sockel) Tex. metallic finish

X2 Longboard X2LO250 2 Drawers right or left +

1 open section right or left 1 box file height | weight: 90 kg

BeechHeartwood

ash Heartwood ashblack stained

SycamoreElm | Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

Extra charge Surface Outer body stained according to sample, per longboard and colour 255 Inner body lacquered in accent colour or according to RAL/NCS, per longboard and per colour 255Extra charge Locks Central lock for all drawers, price per drawer 365Extra charge Drawer Additional drawer (2 piece) instead of open compartment, LongboardC2LO130 395 Additional drawer (2 piece) instead of open compartment, LongboardC2LO190 750 Additional drawer (2 piece) instead of open compartment, LongboardC2LO250 915

4345 4450 4635 4775 5220

5480 5625 5880 6050 6610

6220 6395 6690 6880 7515

Retail in EURO excl. VAT

78

X2 Round table | Selection

Top Solid wood, selection, 28 mm thicknessEdge K 60 or K63 Surface lacquered, oiled or soapedBase Legs in solid wood, the same as the table top. Nodules in

cast metal with a steel plate connecting ring, textured metallic finish in 4 colours: sand, rust, anthracite and silver

Design Dante Bonuccelli

Minimum diameter: 115 cm

Article Table area m² x H in cm

Surface difference per m² for non-standard sizes

X2RD130X2RD140X2RD150X2RD160X2RD170X2RD180

1.691.962.252.562.893.24

4 feet4 feet4 feet5 feet5 feet5 feet

130 x 74 140 x 74 150 x 74 160 x 74 170 x 74 180 x 74

BeechHeartwood

ash Heartwood ashblack stained

SycamoreElm | Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

TopEdgeSurfaceBase

Lazy Suzan

Revolving food tray

Solid wood, selection, 22 mm dickTapered edge profile around entire circumferencelacquered, oiled or soaped Aluminium baseboard with lug for solid wood tray

Article

LS 620LS 700LS 750LS 800LS 900

62 cm 70 cm 75 cm 80 cm 90 cm

in cmPaint finish

Basic colourBeech

Heartwood ashHeartwood ashblack stained

SycamoreElm | Maple

Ash

CherryOak

Pear WalnutBlack Walnut

without sapwoodBlack Walnut

with sapwood

Additional top shapes (elliptical, boat-shaped) are available on demand.

Extra charge Surface Table top and wooden parts of the base stained according to sample, per table and per colour 255Extra charge Base Nodules lacquered in basic or accent colour or according to RAL/NCS, per base and per colour 255

5010 5200 5600 5870 66155650 5885 6335 6635 74956000 6265 6775 7160 81306955 7265 7845 8315 94507360 7720 8375 8920 102007815 8230 8950 9635 110701040 1175 1400 1500 1825

960 1010 1060 1135 1170 13201055 - - - - -1140 - - - - -1285 - - - - -1525 - - - - -

79

X2 Longboard

Outer body Solid wood, selection, 24 mm thicknessEdge K 60 or K63 Surface lacquered, oiled or soapedBack Textured metallic paint in 4 colours, sand, rust, anthracite and silverInner body Textured metallic paint in 4 colours, sand, rust, anthracite and silver.

2 drawers. Drawer body left or right possible, must be specified.Drawer Wood | black leatherFront Textured metallic paint in 4 colours: sand, rust, anthracite and silverBase with black set-back hidden under frame (height 4 cm); or with set-back

under frame (height 12 cm), both textured metallic finish in 4 colours: sand, rust, anthracite or silver

Design Dante Bonuccelli

Article FrontW x D x H in cm

X2LO130P1 130 x 46 x 46 (+ Sockel) Tex. metallic finish

Model with 12 cm underframe, should be securely attached to the wall from the middle of the back so that it does not tip forward when a full drawer is opened.

X2LO190P1 190 x 46 x 46 (+ Sockel) Tex. metallic finish

X2 Longboard X2LO190 2 Drawers right or left +

1 open section right or left 1 box file height | weight: 70 kg

X2 Longboard X2LO130 2 Drawers right or left +

1 open section right or left 1 box file height | weight: 50 kg

X2LO250P1 250 x 46 x 46 (+ Sockel) Tex. metallic finish

X2 Longboard X2LO250 2 Drawers right or left +

1 open section right or left 1 box file height | weight: 90 kg

BeechHeartwood

ash Heartwood ashblack stained

SycamoreElm | Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

Extra charge Surface Outer body stained according to sample, per longboard and colour 255 Inner body lacquered in accent colour or according to RAL/NCS, per longboard and per colour 255Extra charge Locks Central lock for all drawers, price per drawer 365Extra charge Drawer Additional drawer (2 piece) instead of open compartment, LongboardC2LO130 395 Additional drawer (2 piece) instead of open compartment, LongboardC2LO190 750 Additional drawer (2 piece) instead of open compartment, LongboardC2LO250 915

4345 4450 4635 4775 5220

5480 5625 5880 6050 6610

6220 6395 6690 6880 7515

Retail in EURO excl. VAT

80

Article BeechHeartwood

ash Heartwood ashblack stained

SycamoreElm | Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

X2 Sideboard

Outer body Solid wood, selection, 24 mm thicknessEdge K 60 or K63 Surface lacquered, oiled or soapedInner body Slate black lacqueredFront Textured metallic paint in 4 colours, sand, rust, anthracite and silverBase with black set-back hidden under frame (height 4 cm); or with

set-back under frame (height 12 cm), both textured metallic finish in 4 colours: sand, rust, anthracite or silver

Design Dante Bonuccelli

X2 Sideboard X2SB3 with 3 doors, 1 adjustable shelf per section

1 box file height | weight: 80 kg

X2SB6P1 250 x 46 x 69 (+ base) Tex. metallic finish

X2 Sideboard X2SB6 with 6 doors, 1 adjustable shelf per section

1 box file height | weight: 140 kg

FrontW x D x H in cm

X2SB3P1 130 x 46 x 69 (+ base) Tex. metallic finish

X2SB5P1 210 x 46 x 69 (+ base) Tex. metallic finish

X2 Sideboard X2SB5 with 5 doors, 1 adjustable shelf per section

1 box file height | weight: 120 kg

X2SB4P1 170 x 46 x 69 (+ base) Tex. metallic finish

X2 Sideboard X2SB4 with 4 doors, 1 adjustable shelf per section

1 box file height | weight: 100 kg

Extra charge Surface Body stained according to sample, per sideboard and colour 255 Body lacquered in accent colour according to RAL/NCS, per sideboard and per colour 255Extra charge Locks Central lock for all doors and drawers, price per sideboard with 1 lock barrel fitted at side at right (on request at left) 205 Price per door 365 Price per drawer unit (width 40 cm or 80 cm) for example: X2SB3, 2 doors and 1 drawer unit: 2 x € 205 + 1 x € 365 = € 775

5075 5220 5455 5615 6190

5745 5915 6190 6375 7035

6555 6740 7075 7285 8045

7415 7635 8030 8265 9130

81

Article BeechHeartwood

ash Heartwood ashblack stained

SycamoreElm | Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

W x D x H in cm SlidingInner | Outer

X2SL170P1X2SL170P2

170 x 46 x 69 (+ base)170 x 46 x 69 (+ base)

both lacqueredveneered | lacquered

X2 Slideboard X2SL170 with 2 sliding doors, 1 adjustable shelf per section

1 box file height| weight: 100 kg

X2 Slideboard

Outer body Solid wood, selection, 24 mm thicknessEdge K 60 or K63 Surface lacquered, oiled or soapedInner body deep black lacqueredFront Textured metallic paint in 4 colours, sand, rust, anthracite and silverSliding doors Price 1: 2 sliding doors in textured metallic paint Price 2: 1 door (inner) veneered | 1 door (outer) textured

metallic paintBase with black set-back hidden under frame (height 4 cm); or with

set-back under frame (height 12 cm), both textured metallic finish in 4 colours: sand, rust, anthracite or silver

Design Dante Bonuccelli

X2SL210P1X2SL210P2

210 x 46 x 69 (+ base)210 x 46 x 69 (+ base)

both lacqueredveneered | lacquered

X2 Slideboard X2SL210 with 2 sliding doors, 1 adjustable shelf per section

1 box file height | weight: 120 kg

X2SL250P1X2SL250P2

250 x 46 x 69 (+ base)250 x 46 x 69 (+ base)

both lacqueredveneered | lacquered

X2 Slideboard X2SL250 with 2 sliding doors, 1 adjustable shelf per section

1 box file height | weight: 160 kg

Extra charge Surface Body stained according to sample, per slideboard and colour 255 Outer body in a different basic or accent colour or according to RAL/NSC textured metallic finish 255 Extra charge Locks Central lock for inner and outer sliding door 560

6075 6235 6510 6690 73606565 6725 7005 7185 7845

6885 7065 7405 7610 83757370 7550 7885 8100 8865

7750 7965 8355 8590 94558235 8455 8835 9075 9945

Retail in EURO excl. VAT

80

Article BeechHeartwood

ash Heartwood ashblack stained

SycamoreElm | Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

X2 Sideboard

Outer body Solid wood, selection, 24 mm thicknessEdge K 60 or K63 Surface lacquered, oiled or soapedInner body Slate black lacqueredFront Textured metallic paint in 4 colours, sand, rust, anthracite and silverBase with black set-back hidden under frame (height 4 cm); or with

set-back under frame (height 12 cm), both textured metallic finish in 4 colours: sand, rust, anthracite or silver

Design Dante Bonuccelli

X2 Sideboard X2SB3 with 3 doors, 1 adjustable shelf per section

1 box file height | weight: 80 kg

X2SB6P1 250 x 46 x 69 (+ base) Tex. metallic finish

X2 Sideboard X2SB6 with 6 doors, 1 adjustable shelf per section

1 box file height | weight: 140 kg

FrontW x D x H in cm

X2SB3P1 130 x 46 x 69 (+ base) Tex. metallic finish

X2SB5P1 210 x 46 x 69 (+ base) Tex. metallic finish

X2 Sideboard X2SB5 with 5 doors, 1 adjustable shelf per section

1 box file height | weight: 120 kg

X2SB4P1 170 x 46 x 69 (+ base) Tex. metallic finish

X2 Sideboard X2SB4 with 4 doors, 1 adjustable shelf per section

1 box file height | weight: 100 kg

Extra charge Surface Body stained according to sample, per sideboard and colour 255 Body lacquered in accent colour according to RAL/NCS, per sideboard and per colour 255Extra charge Locks Central lock for all doors and drawers, price per sideboard with 1 lock barrel fitted at side at right (on request at left) 205 Price per door 365 Price per drawer unit (width 40 cm or 80 cm) for example: X2SB3, 2 doors and 1 drawer unit: 2 x € 205 + 1 x € 365 = € 775

5075 5220 5455 5615 6190

5745 5915 6190 6375 7035

6555 6740 7075 7285 8045

7415 7635 8030 8265 9130

81

Article BeechHeartwood

ash Heartwood ashblack stained

SycamoreElm | Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

W x D x H in cm SlidingInner | Outer

X2SL170P1X2SL170P2

170 x 46 x 69 (+ base)170 x 46 x 69 (+ base)

both lacqueredveneered | lacquered

X2 Slideboard X2SL170 with 2 sliding doors, 1 adjustable shelf per section

1 box file height| weight: 100 kg

X2 Slideboard

Outer body Solid wood, selection, 24 mm thicknessEdge K 60 or K63 Surface lacquered, oiled or soapedInner body deep black lacqueredFront Textured metallic paint in 4 colours, sand, rust, anthracite and silverSliding doors Price 1: 2 sliding doors in textured metallic paint Price 2: 1 door (inner) veneered | 1 door (outer) textured

metallic paintBase with black set-back hidden under frame (height 4 cm); or with

set-back under frame (height 12 cm), both textured metallic finish in 4 colours: sand, rust, anthracite or silver

Design Dante Bonuccelli

X2SL210P1X2SL210P2

210 x 46 x 69 (+ base)210 x 46 x 69 (+ base)

both lacqueredveneered | lacquered

X2 Slideboard X2SL210 with 2 sliding doors, 1 adjustable shelf per section

1 box file height | weight: 120 kg

X2SL250P1X2SL250P2

250 x 46 x 69 (+ base)250 x 46 x 69 (+ base)

both lacqueredveneered | lacquered

X2 Slideboard X2SL250 with 2 sliding doors, 1 adjustable shelf per section

1 box file height | weight: 160 kg

Extra charge Surface Body stained according to sample, per slideboard and colour 255 Outer body in a different basic or accent colour or according to RAL/NSC textured metallic finish 255 Extra charge Locks Central lock for inner and outer sliding door 560

6075 6235 6510 6690 73606565 6725 7005 7185 7845

6885 7065 7405 7610 83757370 7550 7885 8100 8865

7750 7965 8355 8590 94558235 8455 8835 9075 9945

Retail in EURO excl. VAT

82

X2 Desk body

Outer body Solid wood, selection, 24 mm thicknessEdge K 60 or K63 Surface lacquered, oiled or soapedInner body Textured metallic paint in 4 colours, sand, rust, anthracite and silverDrawer Standard: Organizable drawer, heartwood ash lacquer black

Option with extra charge: Drawers in solid wood as body, as well as black leather; black leather bottom

Front Textured metallic paint in 4 colours, sand, rust, anthracite and silver or in black leather

Base with black set-back hidden under frame (height 4 cm)Electrification Cable access in bottom, removable door in side of outer body

(allows for re-arrangement)Height Body 56 cm + base 4 cm/12 cmDesign Dante Bonuccelli

X2 Desk body X2K66643 1 A6 Drawer incl. 2 dividers 2 A6 Drawers without partitions incl. standard central lock

Measurement of the inner body in cm: W 43 x D 60 x H 51

X2K66643P1 85 x 85 x 56 (+ base) Tex. metallic finish

X2 Desk body X2K66660 1 A6 Drawer incl. 2 dividers

2 A6 Drawers without partitions incl. standard central lock Measurement of the inner body in cm: W 60 x D 60 x H 51

X2K66660P1 85 x 85 x 56 (+ base) Tex. metallic finish

X2 Desk body X2K6443 1 A6 Drawer incl. 2 dividers

1 A4 hanging file drawer incl. standard central lock

Measurement of the inner body in cm: W 43 x D 60 x H 51

X2K6443P1 85 x 85 x 56 (+ base) Tex. metallic finish

X2 Desk body X2K6460 1 A6 Drawer incl. 2 dividers

1 A4 hanging file drawer incl. standard central lock

Measurement of the inner body in cm: W 60 x D 60 x H 51

X2K6460P1 85 x 85 x 56 (+ base) Tex. metallic finish

Article BeechHeartwood

ash Heartwood ashblack stained

SycamoreElm | Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

FrontW x D x H in cm

Extra charge Surface Body stained according to sample, per slideboard and colour 255 Outer body in a different basic or accent colour or according to RAL/NSC textured metallic finish 255Extra charge Drawers Drawer in solid wood | black leather 825Extra charge casters Body on visible casters (height 64 cm) 65

5125 5265 5520 5685 6290

5330 5480 5740 5915 6545

4790 4925 5150 5315 5885

4970 5105 5345 5520 6100

83

X2 Options

Visible backin textured metallic paint. Colours: sand, rust, anthrazit and silver

X2SRWX2SRWSL170X2SRWSL210X2SRWSL250

SideboardSlideboard width 170 cmSlideboard width 210 cmSlideboard width 250 cm

per sectionper Slideboardper Slideboardper Slideboard

Shelvespaint finish, colour as inner body (price added or deducted)

X2FA Sideboard (section width 40 cm)Slideboard (section width 60 cm)Side- or Slideboard (section width 80 cm)Slideboard (section width 100 cm)

1 item1 item1 item1 item

Pull out shelvepaint finish, colour as inner body

X2AZFA Side-, Long- or Slideboard 1 item

Inner Drawers (behind doors)individually mounted (pre-drilled holes). Fully extendable and self closing. 1 piece priceVersion: Fully lacquered in body colour

X2IS40SBX2IS80SBX2IS80SLX2IS100SLX2IS60SL

Sideboard (section width 40 cm)Sideboard (section width 80 cm)Slideboard model 170 section width 80 cmSlideboard model 210 section width 100 cmSlideboard model 250 section width 60 cm

up to 3 inner drawers possible per unit, dep. on height up to 3 inner drawers possible per unit, dep. on height up to 4 inner drawers possible per unit, dep. on height up to 4 inner drawers possible per unit, dep. on height up to 4 inner drawers possible per unit, dep. on height

Front set drawers (only possible as outside end units)Fully extendable and self closing.Price per sectionVersion: Fully lacquered in body colour

X2FS40SBX2FS80SB

Sideboard (section width 40 cm) | 3 front drawers, instead of 1 doorSideboard (section width 80 cm) | 3 front drawers, instead of 1 door

per sectionper section

1 item1 item1 item1 item1 item

A4 suspended file (insert only, not incl. drawer)Section width 40 cm: 1 insert per drawer possibleSection width 80 cm: 2 inserts per drawer possible

TIXHRE metal black, as insert in internal drawer/front drawer 1 insert

330

310345345365325

12101360

110

270900

11051310

657590

105

Retail in EURO excl. VAT

82

X2 Desk body

Outer body Solid wood, selection, 24 mm thicknessEdge K 60 or K63 Surface lacquered, oiled or soapedInner body Textured metallic paint in 4 colours, sand, rust, anthracite and silverDrawer Standard: Organizable drawer, heartwood ash lacquer black

Option with extra charge: Drawers in solid wood as body, as well as black leather; black leather bottom

Front Textured metallic paint in 4 colours, sand, rust, anthracite and silver or in black leather

Base with black set-back hidden under frame (height 4 cm)Electrification Cable access in bottom, removable door in side of outer body

(allows for re-arrangement)Height Body 56 cm + base 4 cm/12 cmDesign Dante Bonuccelli

X2 Desk body X2K66643 1 A6 Drawer incl. 2 dividers 2 A6 Drawers without partitions incl. standard central lock

Measurement of the inner body in cm: W 43 x D 60 x H 51

X2K66643P1 85 x 85 x 56 (+ base) Tex. metallic finish

X2 Desk body X2K66660 1 A6 Drawer incl. 2 dividers

2 A6 Drawers without partitions incl. standard central lock Measurement of the inner body in cm: W 60 x D 60 x H 51

X2K66660P1 85 x 85 x 56 (+ base) Tex. metallic finish

X2 Desk body X2K6443 1 A6 Drawer incl. 2 dividers

1 A4 hanging file drawer incl. standard central lock

Measurement of the inner body in cm: W 43 x D 60 x H 51

X2K6443P1 85 x 85 x 56 (+ base) Tex. metallic finish

X2 Desk body X2K6460 1 A6 Drawer incl. 2 dividers

1 A4 hanging file drawer incl. standard central lock

Measurement of the inner body in cm: W 60 x D 60 x H 51

X2K6460P1 85 x 85 x 56 (+ base) Tex. metallic finish

Article BeechHeartwood

ash Heartwood ashblack stained

SycamoreElm | Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

FrontW x D x H in cm

Extra charge Surface Body stained according to sample, per slideboard and colour 255 Outer body in a different basic or accent colour or according to RAL/NSC textured metallic finish 255Extra charge Drawers Drawer in solid wood | black leather 825Extra charge casters Body on visible casters (height 64 cm) 65

5125 5265 5520 5685 6290

5330 5480 5740 5915 6545

4790 4925 5150 5315 5885

4970 5105 5345 5520 6100

83

X2 Options

Visible backin textured metallic paint. Colours: sand, rust, anthrazit and silver

X2SRWX2SRWSL170X2SRWSL210X2SRWSL250

SideboardSlideboard width 170 cmSlideboard width 210 cmSlideboard width 250 cm

per sectionper Slideboardper Slideboardper Slideboard

Shelvespaint finish, colour as inner body (price added or deducted)

X2FA Sideboard (section width 40 cm)Slideboard (section width 60 cm)Side- or Slideboard (section width 80 cm)Slideboard (section width 100 cm)

1 item1 item1 item1 item

Pull out shelvepaint finish, colour as inner body

X2AZFA Side-, Long- or Slideboard 1 item

Inner Drawers (behind doors)individually mounted (pre-drilled holes). Fully extendable and self closing. 1 piece priceVersion: Fully lacquered in body colour

X2IS40SBX2IS80SBX2IS80SLX2IS100SLX2IS60SL

Sideboard (section width 40 cm)Sideboard (section width 80 cm)Slideboard model 170 section width 80 cmSlideboard model 210 section width 100 cmSlideboard model 250 section width 60 cm

up to 3 inner drawers possible per unit, dep. on height up to 3 inner drawers possible per unit, dep. on height up to 4 inner drawers possible per unit, dep. on height up to 4 inner drawers possible per unit, dep. on height up to 4 inner drawers possible per unit, dep. on height

Front set drawers (only possible as outside end units)Fully extendable and self closing.Price per sectionVersion: Fully lacquered in body colour

X2FS40SBX2FS80SB

Sideboard (section width 40 cm) | 3 front drawers, instead of 1 doorSideboard (section width 80 cm) | 3 front drawers, instead of 1 door

per sectionper section

1 item1 item1 item1 item1 item

A4 suspended file (insert only, not incl. drawer)Section width 40 cm: 1 insert per drawer possibleSection width 80 cm: 2 inserts per drawer possible

TIXHRE metal black, as insert in internal drawer/front drawer 1 insert

330

310345345365325

12101360

110

270900

11051310

657590

105

Retail in EURO excl. VAT

84

X2 Options

STWA1STWAB1STWRG1STWML1STL

1 item1 item1 item1 item

Lid in aluminium brushed with natural anodised finishLid in aluminium brushed with bronze or black anodised finish Lid in oiled untreated steel or chromium-platedLid in solid wood or leather black2 bars configurated as requested Lid only, WITHOUT box and sockets, reduced price

on demand

STWA2STWAB2STWRG2STWML2STL

1 item1 item1 item1 item

Lid in aluminium brushed with natural anodised finishLid in aluminium brushed with bronze or black anodised finish Lid in oiled untreated steel or chromium-platedLid in solid wood or leather black2 bars configurated as requested Lid only, WITHOUT box and sockets, reduced price

on demand

ESS Solid wood, same as body 1 item

ELAELABSTL

Aluminium natural brushed with anodised finishAluminium brushed with bronze or black anodised1 bar configurated as requested

1 item1 item

on demand

LPRE

Black leather desk blotterThere are two versions of the leather writing surface.

70 x 45 Rectangular / oval

Power outlet box with hinged lid (one side useable)Recommended for all conference tables for multiple media plug-ins. Cut out with hinged lid in different versions.Recessed power bar holder in black finish with 4 plug-ins.Cut out size in table top approx. 25 x 12 cm.Standard configuration: 2 x power, 2 x blankconnecting cable not included

Power outlet box with hinged lid (both sides useable)Recommended for all conference tables for multiple media plug-ins. Cut out with hinged lid in different versions.Recessed power bar holder in black finish with 4 and 4 plug-ins.Cut out size in table top approx. 25 x 12 cm.Standard configuration per side: 2 x power, 2 x blankconnecting cable not included

Insert dish set (to match desk body)Insert dish set in same wood as body, including electric wiring underneath (2 x power, 2 x empty) and cable entry (without connecting cable)

Pull out electrical boxRecommended for all desk, work and conference tables. Mounted under the top and can be pulled out when needed. Can be fitted with 4 plug inserts. Standard configuration: 4 x powerIncluding 3 m connecting cable

870101510551075

-160

1010115511701235

-290

810970

790

435

85

KSCH

Black fabric cable tube with fasteningBlack woven net and assembly connector under table top

Cable channel set (horizontal)Attached directly under the table top to carry cables, made from perforated black sheet metal, and is the same length as the table top. 1 set consists of 3 sections à 50 cm

KK6 X x 6 x 3 1 Setperforated black sheet metal

NXKS

Cable shoe Is attached to the table edge and holds and also conceals cables.

20 x 10 x 10 lacquered in basic colors

120

180

1 item 525

Retail in EURO excl. VAT

84

X2 Options

STWA1STWAB1STWRG1STWML1STL

1 item1 item1 item1 item

Lid in aluminium brushed with natural anodised finishLid in aluminium brushed with bronze or black anodised finish Lid in oiled untreated steel or chromium-platedLid in solid wood or leather black2 bars configurated as requested Lid only, WITHOUT box and sockets, reduced price

on demand

STWA2STWAB2STWRG2STWML2STL

1 item1 item1 item1 item

Lid in aluminium brushed with natural anodised finishLid in aluminium brushed with bronze or black anodised finish Lid in oiled untreated steel or chromium-platedLid in solid wood or leather black2 bars configurated as requested Lid only, WITHOUT box and sockets, reduced price

on demand

ESS Solid wood, same as body 1 item

ELAELABSTL

Aluminium natural brushed with anodised finishAluminium brushed with bronze or black anodised1 bar configurated as requested

1 item1 item

on demand

LPRE

Black leather desk blotterThere are two versions of the leather writing surface.

70 x 45 Rectangular / oval

Power outlet box with hinged lid (one side useable)Recommended for all conference tables for multiple media plug-ins. Cut out with hinged lid in different versions.Recessed power bar holder in black finish with 4 plug-ins.Cut out size in table top approx. 25 x 12 cm.Standard configuration: 2 x power, 2 x blankconnecting cable not included

Power outlet box with hinged lid (both sides useable)Recommended for all conference tables for multiple media plug-ins. Cut out with hinged lid in different versions.Recessed power bar holder in black finish with 4 and 4 plug-ins.Cut out size in table top approx. 25 x 12 cm.Standard configuration per side: 2 x power, 2 x blankconnecting cable not included

Insert dish set (to match desk body)Insert dish set in same wood as body, including electric wiring underneath (2 x power, 2 x empty) and cable entry (without connecting cable)

Pull out electrical boxRecommended for all desk, work and conference tables. Mounted under the top and can be pulled out when needed. Can be fitted with 4 plug inserts. Standard configuration: 4 x powerIncluding 3 m connecting cable

870101510551075

-160

1010115511701235

-290

810970

790

435

85

KSCH

Black fabric cable tube with fasteningBlack woven net and assembly connector under table top

Cable channel set (horizontal)Attached directly under the table top to carry cables, made from perforated black sheet metal, and is the same length as the table top. 1 set consists of 3 sections à 50 cm

KK6 X x 6 x 3 1 Setperforated black sheet metal

NXKS

Cable shoe Is attached to the table edge and holds and also conceals cables.

20 x 10 x 10 lacquered in basic colors

120

180

1 item 525

Retail in EURO excl. VAT

87

BRACE88

89

89

89

90

Rectangular/Elliptical table

Round table

Video conference table

Desk combination with HUE

Options

87

BRACE88

89

89

89

90

Rectangular/Elliptical table

Round table

Video conference table

Desk combination with HUE

Options

88

Article L x W x H in cm Table area m2

Heartwood ash+

Heartwood ash black stained

Elm 1)

1) only with steel base

Ash

Oak Black Walnut(with sapwood)

Black Walnut(without sapwood)

BRARE180 / BRASE180 / BRABF180 180 x 105 x 74 1.89BRARE190 / BRASE190 / BRABF190 190 x 105 x 74 2.00BRARE200 / BRASE200 / BRABF200 200 x 105 x 74 2.10BRARE210 / BRASE210 / BRABF210 210 x 105 x 74 2.21BRARE220 / BRASE220 / BRABF220 220 x 105 x 74 2.31BRARE230 / BRASE230 / BRABF230 230 x 105 x 74 2.42BRARE240 / BRASE240 / BRABF240 240 x 105 x 74 2.52BRARE250 / BRASE250 / BRAB 250 250 x 105 x 74 2.63BRARE260 / BRASE260 / BRABF260 260 x 110 x 74 2.86BRARE270 / BRASE270 / BRABF270 270 x 110 x 74 2.97BRARE280 / BRASE280 / BRABF280 280 x 110 x 74 3.08BRARE290 / BRASE290 / BRABF290 290 x 110 x 74 3.19BRARE300 / BRASE300 / BRABF300 300 x 110 x 74 3.30Surface difference per m2 for non-standard sizes

Article L x W x H in cm Table area m2

Heartwood ash+

Heartwood ash black stained

Elm 1)

1) only with steel base

Ash

Oak Black Walnut(with sapwood)

Black Walnut(without sapwood)

BRARE320 / BRASE320 / BRABF320 320 x 130 x 74 4.16 4 feetBRARE340 / BRASE340 / BRABF340 340 x 130 x 74 4.42 4 feetBRARE360 / BRASE360 / BRABF360 360 x 130 x 74 4.68 6 feetBRARE380 / BRASE380 / BRABF380 380 x 130 x 74 4.94 6 feetBRARE400 / BRASE400 / BRABF400 400 x 130 x 74 5.20 6 feetBRARE420 / BRASE420 / BRABF420 420 x 130 x 74 5.46 6 feetBRARE440 / BRASE440 / BRABF440 440 x 140 x 74 6.16 6 feetBRARE460 / BRASE460 / BRABF460 460 x 140 x 74 6.44 6 feetBRARE480 / BRASE480 / BRABF480 480 x 140 x 74 6.72 6 feetSurface difference per m2 for non-standard sizes

* On demand with relation to availability of wood and top cutting

Brace Rectangular/Elliptical/Boat-shaped table

Top Solid wood, selection, 28 mm thicknessEdge K 60, K 63 or K 79Surface lacquered, oiled or soapedBase 4 or 6 Legs in solid wood, the same as the table top

or steel paintedDesign Jehs + Laub

Attention:Lengths from 360 cm need 6 feet for stability and must be calculated with the prices mentioned below.

Brace Rectangular/Elliptical/Boat-shaped table

Top Solid wood, selection, 28 mm thicknessEdge K 60, K 63 or K 79Surface lacquered, oiled or soapedBase 4 or 6 Legs in solid wood, the same as the table top

or steel paintedDesign Jehs + Laub

4250 4545 4700 5610 64004340 4655 4815 5765 65804465 4785 4960 5940 67904605 4945 5135 6185 71054730 5080 5280 6370 73154850 5210 5420 6550 75304980 5345 5555 6735 77405100 5480 5700 6920 79555375 5775 6020 7325 84305505 5915 6165 7515 86505640 6050 6315 7710 88855770 6190 6460 7905 91005900 6330 6605 8090 93251040 1175 1400 1500 1825

8330 8855 9225 11385 126708635 9190 9580 11850 132109735 10400 10800 13415 14865

10045 10720 11165 13880 15405*10350 *11055 *11520 *14345 *15935*10695 *11475 *11975 *15000 *16805*11535 *12380 *12940 *16270 *18310*11870 *12740 *13340 *16775 *18905*12205 *13100 *13720 *17285 *19510 1040 1175 1400 1500 1825

Extra charge Surface Table top and wooden parts of the base stained according to sample or lightly oiled, per table and per colour 255 Base Base steel lacquered in basic colour instead of solid wood (Elm only possible with steel base) 0 Base in solid aluminium brushed black or bronze anodised 190 Extra charge Base Steel lacquered in accent colour or according to RAL / NCS, per base and per colour 265

89

Article x H in cm Table area m2 Heartwood ash+

Heartwood ash black stained

Elm 1)

1) only with steel base

Ash

Oak Black Walnut(with sapwood)

Black Walnut(without sapwood)

BRARD130 130 x 74 1.69 3 feetBRARD140 140 x 74 1.96 3 feetBRARD150 150 x 74 2.25 3 feetBRARD160 160 x 74 2.56 3 feetBRARD170 170 x 74 2.89 4 feetBRARD180 180 x 74 3.24 4 feetBRARD190 190 x 74 3.61 4 feetBRARD200 200 x 74 4.00 5 feetSurface difference per m2 for non-standard sizes

Article L x W x H in cm Table area m2 Heartwood ash+

Heartwood ash black stained

Elm 1)

1) only with steel base

Ash

Oak Black Walnut(with sapwood)

Black Walnut(without sapwood)

BRAVC200 200 x 155 / 95 x 74 3.10 4 feetBRAVC260 260 x 165 / 95 x 74 4.29 4 feetBRAVC320 320 x 175 / 95 x 74 5.60 4 feetSurface difference per m2 for non-standard sizes

Brace Round table

Top Solid wood, selection, 28 mm thicknessEdge K 60, K 63 or K 79Surface lacquered, oiled or soapedBase Legs in solid wood, the same as the table top

or steel paintedDesign Jehs + Laub

Brace Video conference table

Top Solid wood, selection, 28 mm thicknessEdge K 60 or K 63Surface lacquered, oiled or soapedBase Legs in solid wood, the same as the table top

or steel paintedDesign Jehs + Laub

Brace/HUE Desk combination with HUE

Please calculate the relevant unit prices (table in the desired dimension as well as the desk body HUE in the desired configuration) and add them together.

Extra charge Surface Table top and wooden parts of the base stained according to sample or lightly oiled, per table and per colour 255 Base Base steel lacquered in basic colour instead of solid wood (Elm only possible with steel base) 0 Base in solid aluminium brushed black or bronze anodised 190 Extra charge Base Steel lacquered in accent colour or according to RAL / NCS, per base and per colour 265

3705 3935 4105 5085 55553955 4195 4405 5480 60254285 4540 4785 5965 65804650 4935 5200 6495 71905435 5775 6075 7615 83905830 6190 6530 8200 90556235 6625 7000 8800 97607060 7510 7925 9995 110501040 1175 1400 1500 1825

5835 6225 6475 8120 89557860 8365 8730 10875 12110

10045 10695 11190 13945 156651040 1175 1400 1500 1825

Retail in EURO excl. VAT

88

Article L x W x H in cm Table area m2

Heartwood ash+

Heartwood ash black stained

Elm 1)

1) only with steel base

Ash

Oak Black Walnut(with sapwood)

Black Walnut(without sapwood)

BRARE180 / BRASE180 / BRABF180 180 x 105 x 74 1.89BRARE190 / BRASE190 / BRABF190 190 x 105 x 74 2.00BRARE200 / BRASE200 / BRABF200 200 x 105 x 74 2.10BRARE210 / BRASE210 / BRABF210 210 x 105 x 74 2.21BRARE220 / BRASE220 / BRABF220 220 x 105 x 74 2.31BRARE230 / BRASE230 / BRABF230 230 x 105 x 74 2.42BRARE240 / BRASE240 / BRABF240 240 x 105 x 74 2.52BRARE250 / BRASE250 / BRAB 250 250 x 105 x 74 2.63BRARE260 / BRASE260 / BRABF260 260 x 110 x 74 2.86BRARE270 / BRASE270 / BRABF270 270 x 110 x 74 2.97BRARE280 / BRASE280 / BRABF280 280 x 110 x 74 3.08BRARE290 / BRASE290 / BRABF290 290 x 110 x 74 3.19BRARE300 / BRASE300 / BRABF300 300 x 110 x 74 3.30Surface difference per m2 for non-standard sizes

Article L x W x H in cm Table area m2

Heartwood ash+

Heartwood ash black stained

Elm 1)

1) only with steel base

Ash

Oak Black Walnut(with sapwood)

Black Walnut(without sapwood)

BRARE320 / BRASE320 / BRABF320 320 x 130 x 74 4.16 4 feetBRARE340 / BRASE340 / BRABF340 340 x 130 x 74 4.42 4 feetBRARE360 / BRASE360 / BRABF360 360 x 130 x 74 4.68 6 feetBRARE380 / BRASE380 / BRABF380 380 x 130 x 74 4.94 6 feetBRARE400 / BRASE400 / BRABF400 400 x 130 x 74 5.20 6 feetBRARE420 / BRASE420 / BRABF420 420 x 130 x 74 5.46 6 feetBRARE440 / BRASE440 / BRABF440 440 x 140 x 74 6.16 6 feetBRARE460 / BRASE460 / BRABF460 460 x 140 x 74 6.44 6 feetBRARE480 / BRASE480 / BRABF480 480 x 140 x 74 6.72 6 feetSurface difference per m2 for non-standard sizes

* On demand with relation to availability of wood and top cutting

Brace Rectangular/Elliptical/Boat-shaped table

Top Solid wood, selection, 28 mm thicknessEdge K 60, K 63 or K 79Surface lacquered, oiled or soapedBase 4 or 6 Legs in solid wood, the same as the table top

or steel paintedDesign Jehs + Laub

Attention:Lengths from 360 cm need 6 feet for stability and must be calculated with the prices mentioned below.

Brace Rectangular/Elliptical/Boat-shaped table

Top Solid wood, selection, 28 mm thicknessEdge K 60, K 63 or K 79Surface lacquered, oiled or soapedBase 4 or 6 Legs in solid wood, the same as the table top

or steel paintedDesign Jehs + Laub

4250 4545 4700 5610 64004340 4655 4815 5765 65804465 4785 4960 5940 67904605 4945 5135 6185 71054730 5080 5280 6370 73154850 5210 5420 6550 75304980 5345 5555 6735 77405100 5480 5700 6920 79555375 5775 6020 7325 84305505 5915 6165 7515 86505640 6050 6315 7710 88855770 6190 6460 7905 91005900 6330 6605 8090 93251040 1175 1400 1500 1825

8330 8855 9225 11385 126708635 9190 9580 11850 132109735 10400 10800 13415 14865

10045 10720 11165 13880 15405*10350 *11055 *11520 *14345 *15935*10695 *11475 *11975 *15000 *16805*11535 *12380 *12940 *16270 *18310*11870 *12740 *13340 *16775 *18905*12205 *13100 *13720 *17285 *19510 1040 1175 1400 1500 1825

Extra charge Surface Table top and wooden parts of the base stained according to sample or lightly oiled, per table and per colour 255 Base Base steel lacquered in basic colour instead of solid wood (Elm only possible with steel base) 0 Base in solid aluminium brushed black or bronze anodised 190 Extra charge Base Steel lacquered in accent colour or according to RAL / NCS, per base and per colour 265

89

Article x H in cm Table area m2 Heartwood ash+

Heartwood ash black stained

Elm 1)

1) only with steel base

Ash

Oak Black Walnut(with sapwood)

Black Walnut(without sapwood)

BRARD130 130 x 74 1.69 3 feetBRARD140 140 x 74 1.96 3 feetBRARD150 150 x 74 2.25 3 feetBRARD160 160 x 74 2.56 3 feetBRARD170 170 x 74 2.89 4 feetBRARD180 180 x 74 3.24 4 feetBRARD190 190 x 74 3.61 4 feetBRARD200 200 x 74 4.00 5 feetSurface difference per m2 for non-standard sizes

Article L x W x H in cm Table area m2 Heartwood ash+

Heartwood ash black stained

Elm 1)

1) only with steel base

Ash

Oak Black Walnut(with sapwood)

Black Walnut(without sapwood)

BRAVC200 200 x 155 / 95 x 74 3.10 4 feetBRAVC260 260 x 165 / 95 x 74 4.29 4 feetBRAVC320 320 x 175 / 95 x 74 5.60 4 feetSurface difference per m2 for non-standard sizes

Brace Round table

Top Solid wood, selection, 28 mm thicknessEdge K 60, K 63 or K 79Surface lacquered, oiled or soapedBase Legs in solid wood, the same as the table top

or steel paintedDesign Jehs + Laub

Brace Video conference table

Top Solid wood, selection, 28 mm thicknessEdge K 60 or K 63Surface lacquered, oiled or soapedBase Legs in solid wood, the same as the table top

or steel paintedDesign Jehs + Laub

Brace/HUE Desk combination with HUE

Please calculate the relevant unit prices (table in the desired dimension as well as the desk body HUE in the desired configuration) and add them together.

Extra charge Surface Table top and wooden parts of the base stained according to sample or lightly oiled, per table and per colour 255 Base Base steel lacquered in basic colour instead of solid wood (Elm only possible with steel base) 0 Base in solid aluminium brushed black or bronze anodised 190 Extra charge Base Steel lacquered in accent colour or according to RAL / NCS, per base and per colour 265

3705 3935 4105 5085 55553955 4195 4405 5480 60254285 4540 4785 5965 65804650 4935 5200 6495 71905435 5775 6075 7615 83905830 6190 6530 8200 90556235 6625 7000 8800 97607060 7510 7925 9995 110501040 1175 1400 1500 1825

5835 6225 6475 8120 89557860 8365 8730 10875 12110

10045 10695 11190 13945 156651040 1175 1400 1500 1825

Retail in EURO excl. VAT

90

Brace Options

KSCH

Black fabric cable tube with fasteningBlack woven net and assembly connector under table top

Cable channel set (horizontal)Attached directly under the table top to carry cables, made from perforated black sheet metal, and is the same length as the table top. 1 set consists of 3 sections à 50 cm

KK6 X x 6 x 3 1 Setperforated black sheet metal

STWA1STWAB1STWRG1STWML1STL

1 item1 item1 item1 item

Lid in aluminium brushed with natural anodised finishLid in aluminium brushed with bronze or black anodised finish Lid in oiled untreated steel or chromium-platedLid in solid wood or leather black2 bars configurated as requested Lid only, WITHOUT box and sockets, reduced price

on demand

STWA2STWAB2STWRG2STWML2STL

1 item1 item1 item1 item

Lid in aluminium brushed with natural anodised finishLid in aluminium brushed with bronze or black anodised finish Lid in oiled untreated steel or chromium-platedLid in solid wood or leather black2 bars configurated as requested Lid only, WITHOUT box and sockets, reduced price

on demand

NXKS

LPRE

USBCMO

Cable shoe Is attached to the table edge and holds and also conceals cables.

20 x 10 x 10 lacquered in basic colors

Black leather desk blotterThere are two versions of the leather writing surface.

USB Charger Modulis recessed under the table top, fix positionHousing in aluminum black anodizedUSB-double charging unit 5V/2,4AIncl. 3 m Power connection cord

70 x 45

W 8 x H 2.5 x D 5

Rectangular / oval

Power outlet box with hinged lid (one side useable)Recommended for all conference tables for multiple media plug-ins. Cut out with hinged lid in different versions.Recessed power bar holder in black finish with 4 plug-ins.Cut out size in table top approx. 25 x 12 cm.Standard configuration: 2 x power, 2 x blankconnecting cable not included

Power outlet box with hinged lid (both sides useable)Recommended for all conference tables for multiple media plug-ins. Cut out with hinged lid in different versions.Recessed power bar holder in black finish with 4 and 4 plug-ins.Cut out size in table top approx. 25 x 12 cm.Standard configuration per side: 2 x power, 2 x blankconnecting cable not included

870101510551075

-160

1010115511701235

-290

180

120

1 item 290

1 item 570

435

91

GEORGE

92

92

93

94

94

Table rectangular / Table high

Drawers / Strip along longitudinal brace

Bench

Seat cushion for the bench

Options

90

Brace Options

KSCH

Black fabric cable tube with fasteningBlack woven net and assembly connector under table top

Cable channel set (horizontal)Attached directly under the table top to carry cables, made from perforated black sheet metal, and is the same length as the table top. 1 set consists of 3 sections à 50 cm

KK6 X x 6 x 3 1 Setperforated black sheet metal

STWA1STWAB1STWRG1STWML1STL

1 item1 item1 item1 item

Lid in aluminium brushed with natural anodised finishLid in aluminium brushed with bronze or black anodised finish Lid in oiled untreated steel or chromium-platedLid in solid wood or leather black2 bars configurated as requested Lid only, WITHOUT box and sockets, reduced price

on demand

STWA2STWAB2STWRG2STWML2STL

1 item1 item1 item1 item

Lid in aluminium brushed with natural anodised finishLid in aluminium brushed with bronze or black anodised finish Lid in oiled untreated steel or chromium-platedLid in solid wood or leather black2 bars configurated as requested Lid only, WITHOUT box and sockets, reduced price

on demand

NXKS

LPRE

USBCMO

Cable shoe Is attached to the table edge and holds and also conceals cables.

20 x 10 x 10 lacquered in basic colors

Black leather desk blotterThere are two versions of the leather writing surface.

USB Charger Modulis recessed under the table top, fix positionHousing in aluminum black anodizedUSB-double charging unit 5V/2,4AIncl. 3 m Power connection cord

70 x 45

W 8 x H 2.5 x D 5

Rectangular / oval

Power outlet box with hinged lid (one side useable)Recommended for all conference tables for multiple media plug-ins. Cut out with hinged lid in different versions.Recessed power bar holder in black finish with 4 plug-ins.Cut out size in table top approx. 25 x 12 cm.Standard configuration: 2 x power, 2 x blankconnecting cable not included

Power outlet box with hinged lid (both sides useable)Recommended for all conference tables for multiple media plug-ins. Cut out with hinged lid in different versions.Recessed power bar holder in black finish with 4 and 4 plug-ins.Cut out size in table top approx. 25 x 12 cm.Standard configuration per side: 2 x power, 2 x blankconnecting cable not included

870101510551075

-160

1010115511701235

-290

180

120

1 item 290

1 item 570

435

91

GEORGE

92

92

93

93

94

Table rectangular / Table high

Drawers / Strip along longitudinal brace

Bench

Seat cushion for the bench

Options

92

Article L x W x H in cm Table area in m2

Top thickness in mm

Heartwoodash

black stained

Ash Oak Black Walnut(with sapwood)

Black Walnut(without sapwood)

GEO200 200 x 100 x 75 2.00 35 GEO220 220 x 100 x 75 2.20 35GEO240 240 x 100 x 75 2.40 35GEO260 260 x 100 x 75 2.60 35GEO280 280 x 100 x 75 2.80 35GEO300 300 x 100 x 75 3.00 40GEO320 320 x 110 x 75 3.52 40GEO340 340 x 110 x 75 3.74 40GEO360 360 x 110 x 75 3.96 40Surface difference per m2 for non-standard sizes

Approval photo not possible with George model.

Article L x W x H in cm Table area in m2 Heartwoodash

black stained

Ash Oak Black Walnut(with sapwood)

Black Walnut(without sapwood)

GEO380 380 x 110 x 75 4.18GEO400 400 x 110 x 75 4.40GEO420 420 x 120 x 75 5.04GEO440 440 x 120 x 75 5.28GEO460 460 x 120 x 75 5.52GEO480 480 x 120 x 75 5.76GEO500 500 x 120 x 75 6.00Surface difference per m2 for non-standard sizes

Approval photo not possible with George model.* On demand with relation to availability of wood and top cutting

Article L x W x H in cm Table area in m2 Heartwoodash

black stained

Ash Oak Black Walnut(with sapwood)

Black Walnut(without sapwood)

GEO200 x 70 200 x 70 x 110 1.40GEO220 x 70 220 x 70 x 110 1.54GEO240 x 70 240 x 70 x 110 1.68GEO260 x 70 260 x 70 x 110 1.82GEO280 x 80 280 x 80 x 110 2.24GEO300 x 80 300 x 80 x 110 2.40Surface difference per m2 for non-standard sizes

Approval photo not possible with George model. Drawers not possible for high table.

Drawer, solid wood as the table top, brass handles FENIX NTM drawer bottom, per drawerBrass crossbeam insert

GEORGE Table

Top Solid wood, selection, 35 resp. 40 mm thicknessEdge K25Surface lacquered, oiledBase solid wood as the tabletopDesign Werner/Vázquez Design Studio

GEORGE Table

Top Solid wood, selection, 40 mm thicknessEdge K25Surface lacquered, oiledBase solid wood as the tabletopDesign Werner/Vázquez Design Studio

GEORGE Table | high

Top Solid wood, selection, 40 mm thicknessEdge K25Surface lacquered, oiledBase solid wood as the tabletopDesign Werner/Vázquez Design Studio

GEORGE Drawers / Strip along longitudinal brace

3640 3795 3975 5220 55503765 3920 4115 5400 57403850 4010 4215 5520 58704055 4225 4430 5815 61804290 4465 4685 6150 65404655 4850 5090 6680 71005350 5570 5845 7670 81505835 6075 6380 8365 88956390 6660 6985 9165 97451040 1175 1400 1500 1825

8195 8535 8955 11745 12495*8820 *9190 *9645 *12655 *13455*9540 *9935 *10425 *13680 *14545*9945 *10355 *10865 *14260 *15160

*10415 *10845 *11380 *14930 *15870*10995 *11455 *12020 *15770 *16765*12070 *12570 *13195 *17310 *18400

1040 1175 1400 1500 1825

3705 3850 4050 5310 56453825 3985 4180 5490 58353975 4145 4350 5705 60604115 4285 4500 5900 62754325 4505 4730 6200 65954800 5000 5245 6885 73201040 1175 1400 1500 1825

585

235

93

Article L x W x H in cm Fabric Revive

Fabric Hero

Leather Linea

Leather Ascot

Leather Aquario

GEOK200 198 x 34 x 3GEOK220 218 x 34 x 3GEOK240 238 x 34 x 3GEOK260 258 x 34 x 3GEOK280 278 x 34 x 3GEOK300 298 x 34 x 3

Article L x W x H in cm Heartwoodash

black stained

Ash Oak Black Walnut(with sapwood)

Black Walnut(without sapwood)

GEOBT200 200 x 36 x 43 2 feetGEOBT220 220 x 36 x 43 2 feetGEOBT240 240 x 36 x 43 2 feetGEOBT260 260 x 36 x 43 2 feetGEOBT280 280 x 36 x 43 3 feetGEOBT300 300 x 36 x 43 3 feet

Article L x W x H in cm Heartwoodash

black stained

Ash Oak Black Walnut(with sapwood)

Black Walnut (without sapwood)

GEOB200 200 x 36 x 43 2 feetGEOB220 220 x 36 x 43 2 feetGEOB240 240 x 36 x 43 2 feetGEOB260 260 x 36 x 43 2 feetGEOB280 280 x 36 x 43 3 feetGEOB300 300 x 36 x 43 3 feet

GEORGE Bench without crossbeam

Seat Solid wood, selection, 30 mm thicknessEdge K25Surface lacquered, oiledBase Solid wood as seatboard Design Werner/Vázquez Design Studio

GEORGE Bench with crossbeam

Seat Solid wood, selection, 30 mm thicknessEdge K25Surface lacquered, oiledBase Solid wood as seatboard Design Werner/Vázquez Design Studio

GEORGE Seat cushion for the bench

Underside with anti-slide fabric

1750 1825 1920 2515 26751805 1880 1965 2585 27551860 1935 2030 2670 28401960 2045 2150 2820 29952125 2215 2320 3050 32402230 2325 2440 3205 3405

1960 2045 2150 2820 29952020 2100 2210 2895 30802075 2160 2265 2970 31552175 2270 2380 3120 33202285 2380 2500 3275 34802385 2495 2615 3425 3640

810 960 1030 1185 1570 855 1020 1060 1200 1600 895 1060 1100 1240 1635 955 1120 1160 1300 16951015 1180 1220 1360 17551075 1240 1280 1420 1815

Retail in EURO excl. VAT

92

Article L x W x H in cm Table area in m2

Top thickness in mm

Heartwoodash

black stained

Ash Oak Black Walnut(with sapwood)

Black Walnut(without sapwood)

GEO200 200 x 100 x 75 2.00 35 GEO220 220 x 100 x 75 2.20 35GEO240 240 x 100 x 75 2.40 35GEO260 260 x 100 x 75 2.60 35GEO280 280 x 100 x 75 2.80 35GEO300 300 x 100 x 75 3.00 40GEO320 320 x 110 x 75 3.52 40GEO340 340 x 110 x 75 3.74 40GEO360 360 x 110 x 75 3.96 40Surface difference per m2 for non-standard sizes

Approval photo not possible with George model.

Article L x W x H in cm Table area in m2 Heartwoodash

black stained

Ash Oak Black Walnut(with sapwood)

Black Walnut(without sapwood)

GEO380 380 x 110 x 75 4.18GEO400 400 x 110 x 75 4.40GEO420 420 x 120 x 75 5.04GEO440 440 x 120 x 75 5.28GEO460 460 x 120 x 75 5.52GEO480 480 x 120 x 75 5.76GEO500 500 x 120 x 75 6.00Surface difference per m2 for non-standard sizes

Approval photo not possible with George model.* On demand with relation to availability of wood and top cutting

Article L x W x H in cm Table area in m2 Heartwoodash

black stained

Ash Oak Black Walnut(with sapwood)

Black Walnut(without sapwood)

GEO200 x 70 200 x 70 x 110 1.40GEO220 x 70 220 x 70 x 110 1.54GEO240 x 70 240 x 70 x 110 1.68GEO260 x 70 260 x 70 x 110 1.82GEO280 x 80 280 x 80 x 110 2.24GEO300 x 80 300 x 80 x 110 2.40Surface difference per m2 for non-standard sizes

Approval photo not possible with George model. Drawers not possible for high table.

Drawer, solid wood as the table top, brass handles FENIX NTM drawer bottom, per drawerBrass crossbeam insert

GEORGE Table

Top Solid wood, selection, 35 resp. 40 mm thicknessEdge K25Surface lacquered, oiledBase solid wood as the tabletopDesign Werner/Vázquez Design Studio

GEORGE Table

Top Solid wood, selection, 40 mm thicknessEdge K25Surface lacquered, oiledBase solid wood as the tabletopDesign Werner/Vázquez Design Studio

GEORGE Table | high

Top Solid wood, selection, 40 mm thicknessEdge K25Surface lacquered, oiledBase solid wood as the tabletopDesign Werner/Vázquez Design Studio

GEORGE Drawers / Strip along longitudinal brace

3640 3795 3975 5220 55503765 3920 4115 5400 57403850 4010 4215 5520 58704055 4225 4430 5815 61804290 4465 4685 6150 65404655 4850 5090 6680 71005350 5570 5845 7670 81505835 6075 6380 8365 88956390 6660 6985 9165 97451040 1175 1400 1500 1825

8195 8535 8955 11745 12495*8820 *9190 *9645 *12655 *13455*9540 *9935 *10425 *13680 *14545*9945 *10355 *10865 *14260 *15160

*10415 *10845 *11380 *14930 *15870*10995 *11455 *12020 *15770 *16765*12070 *12570 *13195 *17310 *18400

1040 1175 1400 1500 1825

3705 3850 4050 5310 56453825 3985 4180 5490 58353975 4145 4350 5705 60604115 4285 4500 5900 62754325 4505 4730 6200 65954800 5000 5245 6885 73201040 1175 1400 1500 1825

585

235

93

Article L x W x H in cm Fabric Revive

Fabric Hero

Leather Linea

Leather Ascot

Leather Aquario

GEOK200 198 x 34 x 3GEOK220 218 x 34 x 3GEOK240 238 x 34 x 3GEOK260 258 x 34 x 3GEOK280 278 x 34 x 3GEOK300 298 x 34 x 3

Article L x W x H in cm Heartwoodash

black stained

Ash Oak Black Walnut(with sapwood)

Black Walnut(without sapwood)

GEOBT200 200 x 36 x 43 2 feetGEOBT220 220 x 36 x 43 2 feetGEOBT240 240 x 36 x 43 2 feetGEOBT260 260 x 36 x 43 2 feetGEOBT280 280 x 36 x 43 3 feetGEOBT300 300 x 36 x 43 3 feet

Article L x W x H in cm Heartwoodash

black stained

Ash Oak Black Walnut(with sapwood)

Black Walnut (without sapwood)

GEOB200 200 x 36 x 43 2 feetGEOB220 220 x 36 x 43 2 feetGEOB240 240 x 36 x 43 2 feetGEOB260 260 x 36 x 43 2 feetGEOB280 280 x 36 x 43 3 feetGEOB300 300 x 36 x 43 3 feet

GEORGE Bench without crossbeam

Seat Solid wood, selection, 30 mm thicknessEdge K25Surface lacquered, oiledBase Solid wood as seatboard Design Werner/Vázquez Design Studio

GEORGE Bench with crossbeam

Seat Solid wood, selection, 30 mm thicknessEdge K25Surface lacquered, oiledBase Solid wood as seatboard Design Werner/Vázquez Design Studio

GEORGE Seat cushion for the bench

Underside with anti-slide fabric

1750 1825 1920 2515 26751805 1880 1965 2585 27551860 1935 2030 2670 28401960 2045 2150 2820 29952125 2215 2320 3050 32402230 2325 2440 3205 3405

1960 2045 2150 2820 29952020 2100 2210 2895 30802075 2160 2265 2970 31552175 2270 2380 3120 33202285 2380 2500 3275 34802385 2495 2615 3425 3640

810 960 1030 1185 1570 855 1020 1060 1200 1600 895 1060 1100 1240 1635 955 1120 1160 1300 16951015 1180 1220 1360 17551075 1240 1280 1420 1815

Retail in EURO excl. VAT

94

GEORGE Options

STWA2STWAB2STWRG2STWML2STL

1 item1 item1 item1 item

Lid in aluminium brushed with natural anodised finishLid in aluminium brushed with bronze or black anodised finish Lid in oiled untreated steel or chromium-platedLid in solid wood or leather black2 bars configurated as requested Lid only, WITHOUT box and sockets, reduced price

on demand

STWA1STWAB1STWRG1STWML1STL

1 item1 item1 item1 item

Lid in aluminium brushed with natural anodised finishLid in aluminium brushed with bronze or black anodised finish Lid in oiled untreated steel or chromium-platedLid in solid wood or leather black2 bars configurated as requested Lid only, WITHOUT box and sockets, reduced price

on demand

Power outlet box with hinged lid (both sides useable)Recommended for all conference tables for multiple media plug-ins. Cut out with hinged lid in different versions.Recessed power bar holder in black finish with 4 and 4 plug-ins.Cut out size in table top approx. 25 x 12 cm.Standard configuration per side: 2 x power, 2 x blankconnecting cable not included

Power outlet box with hinged lid (one side useable)Recommended for all conference tables for multiple media plug-ins. Cut out with hinged lid in different versions.Recessed power bar holder in black finish with 4 plug-ins.Cut out size in table top approx. 25 x 12 cm.Standard configuration: 2 x power, 2 x blankconnecting cable not included

1010115511701235

-290

870101510551075

-160

HUE

96 - 97

98 - 99

100 - 101

102 - 103

104 - 105

106 - 107

108

Lowboard

Lowboard with sliding doors

Sideboard

Sideboard with sliding doors

Highboard

Cabinet and Wardrobe

Desk body

94

GEORGE Options

STWA2STWAB2STWRG2STWML2STL

1 item1 item1 item1 item

Lid in aluminium brushed with natural anodised finishLid in aluminium brushed with bronze or black anodised finish Lid in oiled untreated steel or chromium-platedLid in solid wood or leather black2 bars configurated as requested Lid only, WITHOUT box and sockets, reduced price

on demand

STWA1STWAB1STWRG1STWML1STL

1 item1 item1 item1 item

Lid in aluminium brushed with natural anodised finishLid in aluminium brushed with bronze or black anodised finish Lid in oiled untreated steel or chromium-platedLid in solid wood or leather black2 bars configurated as requested Lid only, WITHOUT box and sockets, reduced price

on demand

Power outlet box with hinged lid (both sides useable)Recommended for all conference tables for multiple media plug-ins. Cut out with hinged lid in different versions.Recessed power bar holder in black finish with 4 and 4 plug-ins.Cut out size in table top approx. 25 x 12 cm.Standard configuration per side: 2 x power, 2 x blankconnecting cable not included

Power outlet box with hinged lid (one side useable)Recommended for all conference tables for multiple media plug-ins. Cut out with hinged lid in different versions.Recessed power bar holder in black finish with 4 plug-ins.Cut out size in table top approx. 25 x 12 cm.Standard configuration: 2 x power, 2 x blankconnecting cable not included

1010115511701235

-290

870101510551075

-160

HUE

96 - 97

98 - 99

100 - 101

102 - 103

104 - 105

106 - 107

108

Lowboard

Lowboard with sliding doors

Sideboard

Sideboard with sliding doors

Highboard

Cabinet and Wardrobe

Desk body

96

1039

1059

1079

1559

1579

1594

1039

1059

1079

1559

1579

1594

1039

1059

1079

1559

1579

1594

1039

1059

1079

1559

1579

1594

1039

1059

1079

1559

1579

1594

1039

1059

1079

1559

1579

1594

1039

1059

1079

1559

1579

1594

1039

1059

1079

1559

1579

1594

1039

1059

1079

1559

1579

1594

1039

1059

1079

1559

1579

1594

1039

1059

1079

1559

1579

1594

1039

1059

1079

1559

1579

1594

HUE Lowboard

Body Outside / inside: lacquered in base color or veneerFront (doors) Lacquered in base color or veneer Body / front two different lacquered base colors or lacquered / veneer mixed possibleSurface veneer lacquered or undressed wood effect lacquered – oiled or soaped not possibleHandle profiling Milled in front at the topBase frame Blind pedestal, 2.5 cm high, same as bodyShelves Lacquered or veneer in color and execution of the bodyDesign Jehs+Laub

HUE Lowboard LB 2Specification with 2 doors 1 adjustable shelf

HUE Lowboard LB 3Specification with 3 doors 1 adjustable shelf per section

HUE Lowboard LB 4Specification with 4 doors 1 adjustable shelf per section

HUE Lowboard LB 5Specification with 5 doors 1 adjustable shelf per section

Article W x D x H in cm Lacquered Basic colour

VeneerOak

VeneerBlack Walnut(without sapwood)

VZO1039 100 x 45 x 55

VZO1059 150 x 45 x 55

VZO1079 200 x 45 x 55

VZO1098 250 x 45 x 55

1425 1595 1785

1805 2015 2265

2245 2510 2820

2825 3165 3555

Extra charge Surface Furniture lacquered in accent colour, per furniture and per colour 105 Furniture lacquered in RAL / NCS, per furniture and per colour 255 Furniture lacquered in textured paint 01 – 04, per furniture and per colour 260

97

1039

1059

1079

1559

1579

1594

1039

1059

1079

1559

1579

1594

1039

1059

1079

1559

1579

1594

HUE Options Lowboard

Base frame4 steel feets 20 mm, levellable, 20 cm high, chrome-plated or black powder-coated

Finished backsLacquered or veneer, 16 mm thickness

Box drawerFront lacquered or veneer like body, rest lacquered in granite color 66 (dark gray)(maximum 2 per section height)

ShelvesLacquered or veneer

Locking systeminstalled in front (1 lock per section)

Black powder coated

Chrome

VZOBASE1 for 2-door lowboard per lowboardVZOBASE2 for 3-door lowboard per lowboardVZOBASE3 for 4-door lowboard per lowboardVZOBASE4 for 5-door lowboard per lowboard

Lacquered Basic colour

VeneerOak

VeneerBlack Walnut(without sapwood)

VZOFBPL10 for 2-door lowboard per lowboardVZOFBPL11 for 3-door lowboard per lowboardVZOFBPL12 for 4-door lowboard per lowboardVZOFBPL13 for 5-door lowboard per lowboard

VZO6010 Wide shelf for lowboard 2-door 1 itemVZO6020 Wide shelf for lowboards 3-door, 4-door and 5-door 1 itemVZO6515 Narrow shelf for lowboard 3-door 1 itemVZO6525 Narrow shelf for lowboard 5-door 1 item

VZOLOCK1 1 lock for lowboard 2-door per lowboardVZOLOCK2 2 locks for lowboard 3-door per lowboardVZOLOCK3 2 locks for lowboard 4-door per lowboardVZOLOCK4 3 locks for lowboard 5-door per lowboard

VZO8010 Box drawer for lowboard 2-door 1 itemVZO8020 Wide box drawer for lowboards 3-door, 4-door and 5-door 1 itemVZO8515 Narrow box drawer for lowboard 3-door 1 itemVZO8525 Narrow box drawer for lowboard 5-door 1 item

Hanging file frameparallel to the front (maximum 1 per section height)

VZO7010 Hanging file frame for lowboard 2-door 1 itemVZO7020 Hanging file frame for lowboards 3-door, 4-door und 5-door 1 item

Wall mounting

Wall mounting possible instead of pedestal / stable masonry required

475 500485 520515 545540 570

250 290 325360 410 460500 570 645610 700 785

85 105 12085 105 12060 65 7560 65 75

105190200290

400 460 515400 460 515290 330 375290 330 375

400400

0

Extra charge Surface Furniture lacquered in accent colour, per furniture and per colour 105 Furniture lacquered in RAL / NCS, per furniture and per colour 255 Furniture lacquered in textured paint 01 – 04, per furniture and per colour 260

Retail in EURO excl. VAT

96

1039

1059

1079

1559

1579

1594

1039

1059

1079

1559

1579

1594

1039

1059

1079

1559

1579

1594

1039

1059

1079

1559

1579

1594

1039

1059

1079

1559

1579

1594

1039

1059

1079

1559

1579

1594

1039

1059

1079

1559

1579

1594

1039

1059

1079

1559

1579

1594

1039

1059

1079

1559

1579

1594

1039

1059

1079

1559

1579

1594

1039

1059

1079

1559

1579

1594

1039

1059

1079

1559

1579

1594

HUE Lowboard

Body Outside / inside: lacquered in base color or veneerFront (doors) Lacquered in base color or veneer Body / front two different lacquered base colors or lacquered / veneer mixed possibleSurface veneer lacquered or undressed wood effect lacquered – oiled or soaped not possibleHandle profiling Milled in front at the topBase frame Blind pedestal, 2.5 cm high, same as bodyShelves Lacquered or veneer in color and execution of the bodyDesign Jehs+Laub

HUE Lowboard LB 2Specification with 2 doors 1 adjustable shelf

HUE Lowboard LB 3Specification with 3 doors 1 adjustable shelf per section

HUE Lowboard LB 4Specification with 4 doors 1 adjustable shelf per section

HUE Lowboard LB 5Specification with 5 doors 1 adjustable shelf per section

Article W x D x H in cm Lacquered Basic colour

VeneerOak

VeneerBlack Walnut(without sapwood)

VZO1039 100 x 45 x 55

VZO1059 150 x 45 x 55

VZO1079 200 x 45 x 55

VZO1098 250 x 45 x 55

1425 1595 1785

1805 2015 2265

2245 2510 2820

2825 3165 3555

Extra charge Surface Furniture lacquered in accent colour, per furniture and per colour 105 Furniture lacquered in RAL / NCS, per furniture and per colour 255 Furniture lacquered in textured paint 01 – 04, per furniture and per colour 260

97

1039

1059

1079

1559

1579

1594

1039

1059

1079

1559

1579

1594

1039

1059

1079

1559

1579

1594

HUE Options Lowboard

Base frame4 steel feets 20 mm, levellable, 20 cm high, chrome-plated or black powder-coated

Finished backsLacquered or veneer, 16 mm thickness

Box drawerFront lacquered or veneer like body, rest lacquered in granite color 66 (dark gray)(maximum 2 per section height)

ShelvesLacquered or veneer

Locking systeminstalled in front (1 lock per section)

Black powder coated

Chrome

VZOBASE1 for 2-door lowboard per lowboardVZOBASE2 for 3-door lowboard per lowboardVZOBASE3 for 4-door lowboard per lowboardVZOBASE4 for 5-door lowboard per lowboard

Lacquered Basic colour

VeneerOak

VeneerBlack Walnut(without sapwood)

VZOFBPL10 for 2-door lowboard per lowboardVZOFBPL11 for 3-door lowboard per lowboardVZOFBPL12 for 4-door lowboard per lowboardVZOFBPL13 for 5-door lowboard per lowboard

VZO6010 Wide shelf for lowboard 2-door 1 itemVZO6020 Wide shelf for lowboards 3-door, 4-door and 5-door 1 itemVZO6515 Narrow shelf for lowboard 3-door 1 itemVZO6525 Narrow shelf for lowboard 5-door 1 item

VZOLOCK1 1 lock for lowboard 2-door per lowboardVZOLOCK2 2 locks for lowboard 3-door per lowboardVZOLOCK3 2 locks for lowboard 4-door per lowboardVZOLOCK4 3 locks for lowboard 5-door per lowboard

VZO8010 Box drawer for lowboard 2-door 1 itemVZO8020 Wide box drawer for lowboards 3-door, 4-door and 5-door 1 itemVZO8515 Narrow box drawer for lowboard 3-door 1 itemVZO8525 Narrow box drawer for lowboard 5-door 1 item

Hanging file frameparallel to the front (maximum 1 per section height)

VZO7010 Hanging file frame for lowboard 2-door 1 itemVZO7020 Hanging file frame for lowboards 3-door, 4-door und 5-door 1 item

Wall mounting

Wall mounting possible instead of pedestal / stable masonry required

475 500485 520515 545540 570

250 290 325360 410 460500 570 645610 700 785

85 105 12085 105 12060 65 7560 65 75

105190200290

400 460 515400 460 515290 330 375290 330 375

400400

0

Extra charge Surface Furniture lacquered in accent colour, per furniture and per colour 105 Furniture lacquered in RAL / NCS, per furniture and per colour 255 Furniture lacquered in textured paint 01 – 04, per furniture and per colour 260

Retail in EURO excl. VAT

98

1039

1059

1079

1559

1579

1594

1039

1059

1079

1559

1579

1594

1039

1059

1079

1559

1579

1594

1039

1059

1079

1559

1579

1594

1039

1059

1079

1559

1579

1594

1039

1059

1079

1559

1579

1594

1039

1059

1079

1559

1579

1594

1039

1059

1079

1559

1579

1594

1039

1059

1079

1559

1579

1594

HUE Lowboard with sliding doors

Body Outside / inside: lacquered in base color or veneerFront Lacquered in base color or veneer(sliding doors) Body / front two different lacquered base colors or lacquered / veneer mixed possibleSurface veneer lacquered or undressed wood effect lacquered – oiled or soaped not possibleHandle profiling Milled in front at the topBase frame Blind pedestal, 2.5 cm high, same as bodyShelves Lacquered or veneer in color and execution of the bodyDesign Jehs+Laub

HUE Lowboard with sliding doors LBS 150Specification with 2 sliding doors

1 adjustable shelf per section

HUE Lowboard with sliding doors LBS 200Specification with 2 sliding doors

1 adjustable shelf per section

HUE Lowboard with sliding doors LBS 240Specification with 2 sliding doors 1 adjustable shelf per section

Article W x D x H in cm Lacquered Basic colour

VeneerOak

VeneerBlack Walnut(without sapwood)

VZO1559 150 x 45 x 55

VZO1579 200 x 45 x 55

VZO1594 240 x 45 x 55

3730 4210 4730

4120 4650 5220

4425 4985 5600

Extra charge Surface Furniture lacquered in accent colour, per furniture and per colour 105 Furniture lacquered in RAL / NCS, per furniture and per colour 255 Furniture lacquered in textured paint 01 – 04, per furniture and per colour 260

99

1039

1059

1079

1559

1579

1594

HUE Options Lowboard with sliding doors

Finished backsLacquered or veneer, 16 mm thickness

Box drawerFront lacquered or veneer like body, rest lacquered in granite color 66 (dark gray)(maximum 2 per section height)

ShelvesLacquered or veneer

Lacquered Basic colour

VeneerOak

VeneerBlack Walnut(without sapwood)

VZOFBPL14 for lowboard with sliding doors 150 cm wide per lowboardVZOFBPL15 for lowboard with sliding doors 200 cm wide per lowboardVZOFBPL16 for lowboard with sliding doors 240 cm wide per lowboard

VZO6030 Shelf for lowboard with sliding doors 150 cm wide 1 itemVZO6020 Shelf for lowboard with sliding doors 200 cm wide 1 itemVZO6040 Shelf for lowboard with sliding doors 240 cm wide 1 item

VZO8030 Box drawer for lowboard with sliding doors 150 cm wide 1 itemVZO8020 Box drawer for lowboard with sliding doors 200 cm wide 1 itemVZO8040 Box drawer for lowboard with sliding doors 240 cm wide 1 item

360 410 460500 570 645610 700 785

75 95 110 85 105 120105 115 130

375 420 475400 460 515430 495 555

Extra charge Surface Furniture lacquered in accent colour, per furniture and per colour 105 Furniture lacquered in RAL / NCS, per furniture and per colour 255 Furniture lacquered in textured paint 01 – 04, per furniture and per colour 260

Retail in EURO excl. VAT

98

1039

1059

1079

1559

1579

1594

1039

1059

1079

1559

1579

1594

1039

1059

1079

1559

1579

1594

1039

1059

1079

1559

1579

1594

1039

1059

1079

1559

1579

1594

1039

1059

1079

1559

1579

1594

1039

1059

1079

1559

1579

1594

1039

1059

1079

1559

1579

1594

1039

1059

1079

1559

1579

1594

HUE Lowboard with sliding doors

Body Outside / inside: lacquered in base color or veneerFront Lacquered in base color or veneer(sliding doors) Body / front two different lacquered base colors or lacquered / veneer mixed possibleSurface veneer lacquered or undressed wood effect lacquered – oiled or soaped not possibleHandle profiling Milled in front at the topBase frame Blind pedestal, 2.5 cm high, same as bodyShelves Lacquered or veneer in color and execution of the bodyDesign Jehs+Laub

HUE Lowboard with sliding doors LBS 150Specification with 2 sliding doors

1 adjustable shelf per section

HUE Lowboard with sliding doors LBS 200Specification with 2 sliding doors

1 adjustable shelf per section

HUE Lowboard with sliding doors LBS 240Specification with 2 sliding doors 1 adjustable shelf per section

Article W x D x H in cm Lacquered Basic colour

VeneerOak

VeneerBlack Walnut(without sapwood)

VZO1559 150 x 45 x 55

VZO1579 200 x 45 x 55

VZO1594 240 x 45 x 55

3730 4210 4730

4120 4650 5220

4425 4985 5600

Extra charge Surface Furniture lacquered in accent colour, per furniture and per colour 105 Furniture lacquered in RAL / NCS, per furniture and per colour 255 Furniture lacquered in textured paint 01 – 04, per furniture and per colour 260

99

1039

1059

1079

1559

1579

1594

HUE Options Lowboard with sliding doors

Finished backsLacquered or veneer, 16 mm thickness

Box drawerFront lacquered or veneer like body, rest lacquered in granite color 66 (dark gray)(maximum 2 per section height)

ShelvesLacquered or veneer

Lacquered Basic colour

VeneerOak

VeneerBlack Walnut(without sapwood)

VZOFBPL14 for lowboard with sliding doors 150 cm wide per lowboardVZOFBPL15 for lowboard with sliding doors 200 cm wide per lowboardVZOFBPL16 for lowboard with sliding doors 240 cm wide per lowboard

VZO6030 Shelf for lowboard with sliding doors 150 cm wide 1 itemVZO6020 Shelf for lowboard with sliding doors 200 cm wide 1 itemVZO6040 Shelf for lowboard with sliding doors 240 cm wide 1 item

VZO8030 Box drawer for lowboard with sliding doors 150 cm wide 1 itemVZO8020 Box drawer for lowboard with sliding doors 200 cm wide 1 itemVZO8040 Box drawer for lowboard with sliding doors 240 cm wide 1 item

360 410 460500 570 645610 700 785

75 95 110 85 105 120105 115 130

375 420 475400 460 515430 495 555

Extra charge Surface Furniture lacquered in accent colour, per furniture and per colour 105 Furniture lacquered in RAL / NCS, per furniture and per colour 255 Furniture lacquered in textured paint 01 – 04, per furniture and per colour 260

Retail in EURO excl. VAT

100

1039

1059

1079

1559

1579

1594

1039

1059

1079

1559

1579

1594

1039

1059

1079

1559

1579

1594

1039

1059

1079

1559

1579

1594

HUE Sideboard

Body Outside / inside: lacquered in base color or veneerFront (doors) Lacquered in base color or veneer Body / front two different lacquered base colors or lacquered / veneer mixed possibleSurface veneer lacquered or undressed wood effect lacquered – oiled or soaped not possibleHandle profiling Milled in front at the topBase frame Blind pedestal, 2.5 cm high, same as bodyShelves Lacquered or veneer in color and execution of the bodyDesign Jehs+Laub

HUE Sideboard SB 2Specification with 2 doors 2 adjustable shelves per section

HUE Sideboard SB 3Specification with 3 doors 2 adjustable shelves per section

HUE Sideboard SB 4Specification with 4 doors 2 adjustable shelves per section

HUE Sideboard SB 5Specification with 5 doors 2 adjustable shelves per section

Article W x D x H in cm Lacquered Basic colour

VeneerOak

VeneerBlack Walnut(without sapwood)

VZO2039 100 x 45 x 80

VZO2059 150 x 45 x 80

VZO2079 200 x 45 x 80

VZO2098 250 x 45 x 80

1565 1750 1975

2030 2270 2555

2540 2830 3190

3215 3595 4055

Extra charge Surface Furniture lacquered in accent colour, per furniture and per colour 105 Furniture lacquered in RAL / NCS, per furniture and per colour 255 Furniture lacquered in textured paint 01 – 04, per furniture and per colour 260

101

HUE Options Sideboard

Finished backsLacquered or veneer, 16 mm thickness

Box drawerFront lacquered or veneer like body, rest lacquered in granite color 66 (dark gray)(maximum 3 per section height)

Hanging file frameparallel to the front(maximum 2 per section height)

ShelvesLacquered or veneer

Lacquered Basic colour

VeneerOak

VeneerBlack Walnut(without sapwood)

VZOFBPL17 for 2-door sideboard per sideboardVZOFBPL18 for 3-door sideboard per sideboardVZOFBPL19 for 4-door sideboard per sideboardVZOFBPL20 for 5-door sideboard per sideboard

VZO6010 Wide shelf for sideboard 2-door 1 itemVZO6020 Wide shelf for sideboards 3-door, 4-door and 5-door 1 itemVZO6515 Narrow shelf for sideboard 3-door 1 itemVZO6525 Narrow shelf for sideboard 5-door 1 item

VZO8010 Wide box drawer for sideboard 2-door 1 itemVZO8020 Wide box drawer for sideboards 3-door, 4-door and 5-door 1 itemVZO8515 Narrow box drawer for sideboard 3-door 1 itemVZO8525 Narrow box drawer for sideboard 5-door 1 item

VZO7010 Hanging file frame for sideboard 2-door 1 itemVZO7020 Hanging file frame for sideboards 3-door, 4-door und 5-door 1 item

VZOLOCK1 1 lock for sideboard 2-door per sideboardVZOLOCK2 2 locks for sideboard 3-door per sideboardVZOLOCK3 2 locks for sideboard 4-door per sideboardVZOLOCK4 3 locks for sideboard 5-door per sideboard

Locking systeminstalled in front (1 lock per section)

325 375 415470 535 600645 740 825790 900 1010

85 105 12085 105 12060 65 7560 65 75

400 460 515400 460 515290 330 375290 330 375

400400

105190200290

Extra charge Surface Furniture lacquered in accent colour, per furniture and per colour 105 Furniture lacquered in RAL / NCS, per furniture and per colour 255 Furniture lacquered in textured paint 01 – 04, per furniture and per colour 260

Retail in EURO excl. VAT

100

1039

1059

1079

1559

1579

1594

1039

1059

1079

1559

1579

1594

1039

1059

1079

1559

1579

1594

1039

1059

1079

1559

1579

1594

HUE Sideboard

Body Outside / inside: lacquered in base color or veneerFront (doors) Lacquered in base color or veneer Body / front two different lacquered base colors or lacquered / veneer mixed possibleSurface veneer lacquered or undressed wood effect lacquered – oiled or soaped not possibleHandle profiling Milled in front at the topBase frame Blind pedestal, 2.5 cm high, same as bodyShelves Lacquered or veneer in color and execution of the bodyDesign Jehs+Laub

HUE Sideboard SB 2Specification with 2 doors 2 adjustable shelves per section

HUE Sideboard SB 3Specification with 3 doors 2 adjustable shelves per section

HUE Sideboard SB 4Specification with 4 doors 2 adjustable shelves per section

HUE Sideboard SB 5Specification with 5 doors 2 adjustable shelves per section

Article W x D x H in cm Lacquered Basic colour

VeneerOak

VeneerBlack Walnut(without sapwood)

VZO2039 100 x 45 x 80

VZO2059 150 x 45 x 80

VZO2079 200 x 45 x 80

VZO2098 250 x 45 x 80

1565 1750 1975

2030 2270 2555

2540 2830 3190

3215 3595 4055

Extra charge Surface Furniture lacquered in accent colour, per furniture and per colour 105 Furniture lacquered in RAL / NCS, per furniture and per colour 255 Furniture lacquered in textured paint 01 – 04, per furniture and per colour 260

101

HUE Options Sideboard

Finished backsLacquered or veneer, 16 mm thickness

Box drawerFront lacquered or veneer like body, rest lacquered in granite color 66 (dark gray)(maximum 3 per section height)

Hanging file frameparallel to the front(maximum 2 per section height)

ShelvesLacquered or veneer

Lacquered Basic colour

VeneerOak

VeneerBlack Walnut(without sapwood)

VZOFBPL17 for 2-door sideboard per sideboardVZOFBPL18 for 3-door sideboard per sideboardVZOFBPL19 for 4-door sideboard per sideboardVZOFBPL20 for 5-door sideboard per sideboard

VZO6010 Wide shelf for sideboard 2-door 1 itemVZO6020 Wide shelf for sideboards 3-door, 4-door and 5-door 1 itemVZO6515 Narrow shelf for sideboard 3-door 1 itemVZO6525 Narrow shelf for sideboard 5-door 1 item

VZO8010 Wide box drawer for sideboard 2-door 1 itemVZO8020 Wide box drawer for sideboards 3-door, 4-door and 5-door 1 itemVZO8515 Narrow box drawer for sideboard 3-door 1 itemVZO8525 Narrow box drawer for sideboard 5-door 1 item

VZO7010 Hanging file frame for sideboard 2-door 1 itemVZO7020 Hanging file frame for sideboards 3-door, 4-door und 5-door 1 item

VZOLOCK1 1 lock for sideboard 2-door per sideboardVZOLOCK2 2 locks for sideboard 3-door per sideboardVZOLOCK3 2 locks for sideboard 4-door per sideboardVZOLOCK4 3 locks for sideboard 5-door per sideboard

Locking systeminstalled in front (1 lock per section)

325 375 415470 535 600645 740 825790 900 1010

85 105 12085 105 12060 65 7560 65 75

400 460 515400 460 515290 330 375290 330 375

400400

105190200290

Extra charge Surface Furniture lacquered in accent colour, per furniture and per colour 105 Furniture lacquered in RAL / NCS, per furniture and per colour 255 Furniture lacquered in textured paint 01 – 04, per furniture and per colour 260

Retail in EURO excl. VAT

102 1039

1059

1079

1559

1579

1594

1039

1059

1079

1559

1579

1594

1039

1059

1079

1559

1579

1594

HUE Sideboard with sliding doors

Body Outside / inside: lacquered in base color or veneerFront Lacquered in base color or veneer(sliding doors) Body / front two different lacquered base colors or lacquered / veneer mixed possibleSurface veneer lacquered or undressed wood effect lacquered – oiled or soaped not possibleHandle profiling Milled in front at the topBase frame Blind pedestal, 2.5 cm high, same as bodyShelves Lacquered or veneer in color and execution of the bodyDesign Jehs+Laub

HUE Sideboard with sliding doors SBS 150Specification 2 sliding doors 2 adjustable shelves per section

HUE Sideboard with sliding doors SBS 200Specification 2 sliding doors 2 adjustable shelves per section

HUE Sideboard with sliding doors SBS 240Specification 2 sliding doors 2 adjustable shelves per section

Article W x D x H in cm Lacquered Basic colour

VeneerOak

VeneerBlack Walnut(without sapwood)

VZO2559 150 x 45 x 80

VZO2579 200 x 45 x 80

VZO2594 240 x 45 x 80

4040 4565 5125

4520 5105 5735

4890 5525 6205

Extra charge Surface Furniture lacquered in accent colour, per furniture and per colour 105 Furniture lacquered in RAL / NCS, per furniture and per colour 255 Furniture lacquered in textured paint 01 – 04, per furniture and per colour 260

103

HUE Options Sideboard with sliding doors

Finished backsLacquered or veneer, 16 mm thickness

Box drawerFront lacquered or veneer like body, rest lacquered in granite color 66 (dark gray)(maximum 3 per section height)

ShelvesLacquered or veneer

Lacquered Basic colour

VeneerOak

VeneerBlack Walnut(without sapwood)

VZOFBPL21 for sideboard with sliding doors 150 cm wide per sideboardVZOFBPL22 for sideboard with sliding doors 200 cm wide per sideboardVZOFBPL23 for sideboard with sliding doors 240 cm wide per sideboard

VZO6030 Shelf for sideboard with sliding doors 150 cm wide 1 itemVZO6020 Shelf for sideboard with sliding doors 200 cm wide 1 itemVZO6040 Shelf for sideboard with sliding doors 240 cm wide 1 item

VZO8030 Box drawer for sideboard with sliding doors 150 cm wide 1 itemVZO8020 Box drawer for sideboard with sliding doors 200 cm wide 1 itemVZO8040 Box drawer for sideboard with sliding doors 240 cm wide 1 item

470 535 600645 740 825790 900 1010

75 95 110 85 105 120105 115 130

375 420 475400 460 515430 495 555

Extra charge Surface Furniture lacquered in accent colour, per furniture and per colour 105 Furniture lacquered in RAL / NCS, per furniture and per colour 255 Furniture lacquered in textured paint 01 – 04, per furniture and per colour 260

Retail in EURO excl. VAT

102 1039

1059

1079

1559

1579

1594

1039

1059

1079

1559

1579

1594

1039

1059

1079

1559

1579

1594

HUE Sideboard with sliding doors

Body Outside / inside: lacquered in base color or veneerFront Lacquered in base color or veneer(sliding doors) Body / front two different lacquered base colors or lacquered / veneer mixed possibleSurface veneer lacquered or undressed wood effect lacquered – oiled or soaped not possibleHandle profiling Milled in front at the topBase frame Blind pedestal, 2.5 cm high, same as bodyShelves Lacquered or veneer in color and execution of the bodyDesign Jehs+Laub

HUE Sideboard with sliding doors SBS 150Specification 2 sliding doors 2 adjustable shelves per section

HUE Sideboard with sliding doors SBS 200Specification 2 sliding doors 2 adjustable shelves per section

HUE Sideboard with sliding doors SBS 240Specification 2 sliding doors 2 adjustable shelves per section

Article W x D x H in cm Lacquered Basic colour

VeneerOak

VeneerBlack Walnut(without sapwood)

VZO2559 150 x 45 x 80

VZO2579 200 x 45 x 80

VZO2594 240 x 45 x 80

4040 4565 5125

4520 5105 5735

4890 5525 6205

Extra charge Surface Furniture lacquered in accent colour, per furniture and per colour 105 Furniture lacquered in RAL / NCS, per furniture and per colour 255 Furniture lacquered in textured paint 01 – 04, per furniture and per colour 260

103

HUE Options Sideboard with sliding doors

Finished backsLacquered or veneer, 16 mm thickness

Box drawerFront lacquered or veneer like body, rest lacquered in granite color 66 (dark gray)(maximum 3 per section height)

ShelvesLacquered or veneer

Lacquered Basic colour

VeneerOak

VeneerBlack Walnut(without sapwood)

VZOFBPL21 for sideboard with sliding doors 150 cm wide per sideboardVZOFBPL22 for sideboard with sliding doors 200 cm wide per sideboardVZOFBPL23 for sideboard with sliding doors 240 cm wide per sideboard

VZO6030 Shelf for sideboard with sliding doors 150 cm wide 1 itemVZO6020 Shelf for sideboard with sliding doors 200 cm wide 1 itemVZO6040 Shelf for sideboard with sliding doors 240 cm wide 1 item

VZO8030 Box drawer for sideboard with sliding doors 150 cm wide 1 itemVZO8020 Box drawer for sideboard with sliding doors 200 cm wide 1 itemVZO8040 Box drawer for sideboard with sliding doors 240 cm wide 1 item

470 535 600645 740 825790 900 1010

75 95 110 85 105 120105 115 130

375 420 475400 460 515430 495 555

Extra charge Surface Furniture lacquered in accent colour, per furniture and per colour 105 Furniture lacquered in RAL / NCS, per furniture and per colour 255 Furniture lacquered in textured paint 01 – 04, per furniture and per colour 260

Retail in EURO excl. VAT

104

1039

1059

1079

1559

1579

1594

1039

1059

1079

1559

1579

1594

1039

1059

1079

1559

1579

1594

1039

1059

1079

1559

1579

1594

3039

3059

3079

3098

3039

3059

3079

3098

3039

3059

3079

3098

3039

3059

3079

3098

3039

3059

3079

3098

3039

3059

3079

3098

3039

3059

3079

3098

3039

3059

3079

3098

HUE Highboard

Body Outside / inside: lacquered in base color or veneerFront (doors) Lacquered in base color or veneer Body / front two different lacquered base colors or lacquered / veneer mixed possibleSurface veneer lacquered or undressed wood effect lacquered – oiled or soaped not possibleHandle profiling Milled in front at the topBase frame Blind pedestal, 2.5 cm high, same as bodyShelves Lacquered or veneer in color and execution of the bodyDesign Jehs+Laub

HUE Highoard HB 2Specification with 2 doors 3 adjustable shelves per section

HUE Highoard HB 3Specification with 3 doors 3 adjustable shelves per section

HUE Highoard HB 4Specification with 4 doors 3 adjustable shelves per section

HUE Highoard HB 5Specification with 5 doors 3 adjustable shelves per section

Article W x D x H in cm Lacquered Basic colour

VeneerOak

VeneerBlack Walnut(without sapwood)

VZO3039 100 x 45 x 107

VZO3059 150 x 45 x 107

VZO3098 250 x 45 x 107

VZO3079 200 x 45 x 107

1805 2025 2275

2285 2565 2890

3595 4040 4550

2900 3240 3655

Extra charge Surface Furniture lacquered in accent colour, per furniture and per colour 105 Furniture lacquered in RAL / NCS, per furniture and per colour 255 Furniture lacquered in textured paint 01 – 04, per furniture and per colour 260

105

3039

3059

3079

3098

3039

3059

3079

3098

HUE Options Highboard

Finished backsLacquered or veneer, 16 mm thickness

Box drawerFront lacquered or veneer like body, rest lacquered in granite color 66 (dark gray)(maximum 4 per section height)

Hanging file frameparallel to the front(maximum 3 per section height)

ShelvesLacquered or veneer

VZOLOCK1 1 lock for highboard 2-door per highboardVZOLOCK2 2 locks for highboard 3-door per highboardVZOLOCK3 2 locks for highboard 4-door per highboardVZOLOCK4 3 locks for highboard 5-door per highboard

VZO7010 Hanging file frame for highboard 2-door 1 itemVZO7020 Hanging file frame for highboards 3-door, 4-door und 5-door 1 item

Lacquered Basic colour

VeneerOak

VeneerBlack Walnut(without sapwood)

VZOFBPL24 for 2-door highboard per highboardVZOFBPL25 for 3-door highboard per highboardVZOFBPL26 for 4-door highboard per highboardVZOFBPL27 for 5-door highboard per highboard

VZO6010 Wide shelf for highboard 2-door 1 itemVZO6020 Wide shelf for highboards 3-door, 4-door and 5-door 1 itemVZO6515 Narrow shelf for highboard 3-door 1 itemVZO6525 Narrow shelf for highboard 5-door 1 item

VZO8010 Wide box drawer for highboard 2-door 1 itemVZO8020 Wide box drawer for highboards 3-door, 4-door and 5-door 1 itemVZO8515 Narrow box drawer for highboard 3-door 1 itemVZO8525 Narrow box drawer for highboard 5-door 1 item

Locking systeminstalled in front (1 lock per section)

105190200290

400400

395 450 510570 660 735790 900 1010970 1105 1245

85 105 12085 105 12060 65 7560 65 75

400 460 515400 460 515290 330 375290 330 375

Extra charge Surface Furniture lacquered in accent colour, per furniture and per colour 105 Furniture lacquered in RAL / NCS, per furniture and per colour 255 Furniture lacquered in textured paint 01 – 04, per furniture and per colour 260

Retail in EURO excl. VAT

104

1039

1059

1079

1559

1579

1594

1039

1059

1079

1559

1579

1594

1039

1059

1079

1559

1579

1594

1039

1059

1079

1559

1579

1594

3039

3059

3079

3098

3039

3059

3079

3098

3039

3059

3079

3098

3039

3059

3079

3098

3039

3059

3079

3098

3039

3059

3079

3098

3039

3059

3079

3098

3039

3059

3079

3098

HUE Highboard

Body Outside / inside: lacquered in base color or veneerFront (doors) Lacquered in base color or veneer Body / front two different lacquered base colors or lacquered / veneer mixed possibleSurface veneer lacquered or undressed wood effect lacquered – oiled or soaped not possibleHandle profiling Milled in front at the topBase frame Blind pedestal, 2.5 cm high, same as bodyShelves Lacquered or veneer in color and execution of the bodyDesign Jehs+Laub

HUE Highoard HB 2Specification with 2 doors 3 adjustable shelves per section

HUE Highoard HB 3Specification with 3 doors 3 adjustable shelves per section

HUE Highoard HB 4Specification with 4 doors 3 adjustable shelves per section

HUE Highoard HB 5Specification with 5 doors 3 adjustable shelves per section

Article W x D x H in cm Lacquered Basic colour

VeneerOak

VeneerBlack Walnut(without sapwood)

VZO3039 100 x 45 x 107

VZO3059 150 x 45 x 107

VZO3098 250 x 45 x 107

VZO3079 200 x 45 x 107

1805 2025 2275

2285 2565 2890

3595 4040 4550

2900 3240 3655

Extra charge Surface Furniture lacquered in accent colour, per furniture and per colour 105 Furniture lacquered in RAL / NCS, per furniture and per colour 255 Furniture lacquered in textured paint 01 – 04, per furniture and per colour 260

105

3039

3059

3079

3098

3039

3059

3079

3098

HUE Options Highboard

Finished backsLacquered or veneer, 16 mm thickness

Box drawerFront lacquered or veneer like body, rest lacquered in granite color 66 (dark gray)(maximum 4 per section height)

Hanging file frameparallel to the front(maximum 3 per section height)

ShelvesLacquered or veneer

VZOLOCK1 1 lock for highboard 2-door per highboardVZOLOCK2 2 locks for highboard 3-door per highboardVZOLOCK3 2 locks for highboard 4-door per highboardVZOLOCK4 3 locks for highboard 5-door per highboard

VZO7010 Hanging file frame for highboard 2-door 1 itemVZO7020 Hanging file frame for highboards 3-door, 4-door und 5-door 1 item

Lacquered Basic colour

VeneerOak

VeneerBlack Walnut(without sapwood)

VZOFBPL24 for 2-door highboard per highboardVZOFBPL25 for 3-door highboard per highboardVZOFBPL26 for 4-door highboard per highboardVZOFBPL27 for 5-door highboard per highboard

VZO6010 Wide shelf for highboard 2-door 1 itemVZO6020 Wide shelf for highboards 3-door, 4-door and 5-door 1 itemVZO6515 Narrow shelf for highboard 3-door 1 itemVZO6525 Narrow shelf for highboard 5-door 1 item

VZO8010 Wide box drawer for highboard 2-door 1 itemVZO8020 Wide box drawer for highboards 3-door, 4-door and 5-door 1 itemVZO8515 Narrow box drawer for highboard 3-door 1 itemVZO8525 Narrow box drawer for highboard 5-door 1 item

Locking systeminstalled in front (1 lock per section)

105190200290

400400

395 450 510570 660 735790 900 1010970 1105 1245

85 105 12085 105 12060 65 7560 65 75

400 460 515400 460 515290 330 375290 330 375

Extra charge Surface Furniture lacquered in accent colour, per furniture and per colour 105 Furniture lacquered in RAL / NCS, per furniture and per colour 255 Furniture lacquered in textured paint 01 – 04, per furniture and per colour 260

Retail in EURO excl. VAT

106

HUE Cabinet and Wardrobe

Body Outside / inside: lacquered in base color or veneerFront (doors) Lacquered in base color or veneer Body / front two different lacquered base colors or lacquered / veneer mixed possibleSurface veneer lacquered or undressed wood effect lacquered – oiled or soaped not possibleHandle profiling Milled vertically in frontBase frame Blind pedestal, 2.5 cm high, same as bodyShelves Lacquered or veneer in color and execution of the bodyWall mounting Good masonry required, as wall mounting as anti-tipper Design Jehs+Laub

HUE Garderobe 2 – 45 / 2 – 60Specification Wardrobe with 2 doors and interior 1 continuous shelf, 1 middle side, 5 small shelves,

1 pull-out clothes rail

HUE Cabinet 1– 45 / 1– 60Specification Cabinet with 1 door 6 adjustable shelvesHinge left or right possible

Article W x D x H in cm Lacquered Basic colour

VeneerOak

VeneerBlack Walnut(without sapwood)

VZO4119-L 50 x 45 x 220 hinge leftVZO4119-R 50 x 45 x 220 hinge rightVZO4219-L 50 x 60 x 220 hinge leftVZO4219-R 50 x 60 x 220 hinge right

HUE Cabinet 2 – 45 / 2 – 60Specification Cabinet with 2 doors 6 adjustable shelves

VZO5139 100 x 45 x 220VZO5239 100 x 60 x 220

VZO4319 100 x 45 x 220VZO5339 100 x 60 x 220

2130 2405 27052130 2405 27052310 2615 29302310 2615 2930

2990 3370 37953155 3555 4005

3010 3395 38203230 3650 4100

Extra charge Surface Furniture lacquered in accent colour, per furniture and per colour 105 Furniture lacquered in RAL / NCS, per furniture and per colour 255 Furniture lacquered in textured paint 01 – 04, per furniture and per colour 260

107

HUE Options Cabinet and Wardrobe

ShelvesLacquered or veneer

Locking systemVZOLOCK5 1 lock for cabinet 1-door per cabinetVZOLOCK6 1 lock for cabinet 2-door and wardrobe 2-door per cabinet

Lacquered Basic colour

VeneerOak

VeneerBlack Walnut(without sapwood)

VZO6535 Narrow shelf for cabinet 1-door, depth 45 cm 1 itemVZO6545 Narrow shelf for cabinet 1-door, depth 60 cm 1 itemVZO6010 Wide shelf for cabinet 2-door, depth 45 cm 1 itemVZO6050 Wide shelf for cabinet 2-door, depth 60 cm 1 item

270270

60 65 7565 70 8085 105 12095 110 125

Extra charge Surface Furniture lacquered in accent colour, per furniture and per colour 105 Furniture lacquered in RAL / NCS, per furniture and per colour 255 Furniture lacquered in textured paint 01 – 04, per furniture and per colour 260

Retail in EURO excl. VAT

106

HUE Cabinet and Wardrobe

Body Outside / inside: lacquered in base color or veneerFront (doors) Lacquered in base color or veneer Body / front two different lacquered base colors or lacquered / veneer mixed possibleSurface veneer lacquered or undressed wood effect lacquered – oiled or soaped not possibleHandle profiling Milled vertically in frontBase frame Blind pedestal, 2.5 cm high, same as bodyShelves Lacquered or veneer in color and execution of the bodyWall mounting Good masonry required, as wall mounting as anti-tipper Design Jehs+Laub

HUE Garderobe 2 – 45 / 2 – 60Specification Wardrobe with 2 doors and interior 1 continuous shelf, 1 middle side, 5 small shelves,

1 pull-out clothes rail

HUE Cabinet 1– 45 / 1– 60Specification Cabinet with 1 door 6 adjustable shelvesHinge left or right possible

Article W x D x H in cm Lacquered Basic colour

VeneerOak

VeneerBlack Walnut(without sapwood)

VZO4119-L 50 x 45 x 220 hinge leftVZO4119-R 50 x 45 x 220 hinge rightVZO4219-L 50 x 60 x 220 hinge leftVZO4219-R 50 x 60 x 220 hinge right

HUE Cabinet 2 – 45 / 2 – 60Specification Cabinet with 2 doors 6 adjustable shelves

VZO5139 100 x 45 x 220VZO5239 100 x 60 x 220

VZO4319 100 x 45 x 220VZO5339 100 x 60 x 220

2130 2405 27052130 2405 27052310 2615 29302310 2615 2930

2990 3370 37953155 3555 4005

3010 3395 38203230 3650 4100

Extra charge Surface Furniture lacquered in accent colour, per furniture and per colour 105 Furniture lacquered in RAL / NCS, per furniture and per colour 255 Furniture lacquered in textured paint 01 – 04, per furniture and per colour 260

107

HUE Options Cabinet and Wardrobe

ShelvesLacquered or veneer

Locking systemVZOLOCK5 1 lock for cabinet 1-door per cabinetVZOLOCK6 1 lock for cabinet 2-door and wardrobe 2-door per cabinet

Lacquered Basic colour

VeneerOak

VeneerBlack Walnut(without sapwood)

VZO6535 Narrow shelf for cabinet 1-door, depth 45 cm 1 itemVZO6545 Narrow shelf for cabinet 1-door, depth 60 cm 1 itemVZO6010 Wide shelf for cabinet 2-door, depth 45 cm 1 itemVZO6050 Wide shelf for cabinet 2-door, depth 60 cm 1 item

270270

60 65 7565 70 8085 105 12095 110 125

Extra charge Surface Furniture lacquered in accent colour, per furniture and per colour 105 Furniture lacquered in RAL / NCS, per furniture and per colour 255 Furniture lacquered in textured paint 01 – 04, per furniture and per colour 260

Retail in EURO excl. VAT

108

HUE Desk body

Body Outside / inside: lacquered in base color or veneerFront Lacquered in base color or veneer(drawers) Body / front two different lacquered base colors or lacquered / veneer mixed possibleSurface veneer lacquered or undressed wood effect lacquered – oiled or soaped not possibleHandle profiling Milled in front on both sidesBase frame Blind pedestal, 2.5 cm high, same as bodyDesign Jehs+Laub

HUE Desk body / K666 Specification 3 drawers Lock / central locking

Article W x D x H in cm Lacquered Basic colour

VeneerOak

VeneerBlack Walnut(without sapwood)

VZO1029 44.2 x 60.8 x 60 1955 2200 2450

Extra charge Surface Furniture lacquered in accent colour, per furniture and per colour 105 Furniture lacquered in RAL / NCS, per furniture and per colour 255 Furniture lacquered in textured paint 01 – 04, per furniture and per colour 260

109

LIN

110

111

112

113

114

Sideboard

Highboard

Midboard

Midboardplus

Options

108

HUE Desk body

Body Outside / inside: lacquered in base color or veneerFront Lacquered in base color or veneer(drawers) Body / front two different lacquered base colors or lacquered / veneer mixed possibleSurface veneer lacquered or undressed wood effect lacquered – oiled or soaped not possibleHandle profiling Milled in front on both sidesBase frame Blind pedestal, 2.5 cm high, same as bodyDesign Jehs+Laub

HUE Desk body / K666 Specification 3 drawers Lock / central locking

Article W x D x H in cm Lacquered Basic colour

VeneerOak

VeneerBlack Walnut(without sapwood)

VZO1029 44.2 x 60.8 x 60 1955 2200 2450

Extra charge Surface Furniture lacquered in accent colour, per furniture and per colour 105 Furniture lacquered in RAL / NCS, per furniture and per colour 255 Furniture lacquered in textured paint 01 – 04, per furniture and per colour 260

109

LIN

110

111

112

113

114

Sideboard

Highboard

Midboard

Midboardplus

Options

110

LIN Sideboard

Body Front and sides in aluminium, lacquered in basic colour or natural, black, bronze anodised

Inner side: MDF lacquered (colour as body)Top Lacquered in basic colour, solid wood or natural stone,

with profiled grips, if fronts are anodised, slate blackFront DoorsBase Bridge panel lacquered as bodyHeight 72 cm (Body 60 cm + Base 12 cm)

LIN Sideboard SB3Arrangement 3 doors, aluminium lacquered or anodised

1 adjustable shelf per section 1 box file height

Paint finish as body

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

Article W x D x H in cm

Natural stone (standard

range)

Entire body in basic colour + covering top in:

LINSB3LINSRWSB3

LINSB2LINSRWSB2

180 x 46 x 72Visible back

120 x 46 x 72Visible back

LIN Sideboard SB4Arrangement 4 doors, aluminium lacquered or anodised

1 adjustable shelf per section 1 box file height

LINSB4LINSRWSB4

240 x 46 x 72Visible back

LIN Sideboard SB2Arrangement 2 doors, aluminium lacquered or anodised

1 adjustable shelf per section 1 box file height

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

Extra charge Surface entire body in basic or accent colour or colour according to RAL/NCS, per furniture item and colour 255 additional basic or accent colour or colour according to RAL/NCS, per furniture item and colour 185 covering top stained according to sample, per table and colour 255Extra charge Top panel furniture without top (supplied by 3rd party on site) 0

5125 6060 5585 5630 5655 5750 58901435

4205 4835 4510 4540 4565 4620 4720960

6045 7290 6660 6725 6750 6885 70651915

111

Paint finish as body

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

Natural stone (standard

range)

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

Article W x D x H in cm Entire body in basic colour + covering topl in:

LIN Highboard

Body Front and sides in aluminium, lacquered in basic colour or natural, black, bronze anodised

Inner side: MDF lacquered (Colour as body)Top Lacquered in basic colour, solid wood or natural stone,

with profiled grips, if fronts are anodised, slate blackFront DoorsBase Bridge panel lacquered as bodyHeight 92 cm (Body 80 cm + Base 12 cm)

LIN Highboard HB3Arrangement 3 doors, aluminium lacquered or anodised

2 adjustable shelves per section 2 box file height

LIN Highboard HB4Arrangement 4 doors, aluminium lacquered or anodised

2 adjustable shelves per section 2 box file height

LIN Highboard HB5Arrangement 5 doors, aluminium lacquered or anodised

2 adjustable shelves per section 2 box file height

LIN Highboard HB6Arrangement 6 doors, aluminium lacquered or anodised

2 adjustable shelves per section 2 box file height

LINHB3LINSRWHB3

120 x 46 x 92Visible back

LINHB4LINSRWHB4

160 x 46 x 92Visible back

LINHB5LINSRWHB5

200 x 46 x 92Visible back

LINHB6LINSRWHB6

240 x 46 x 92Visible back

Extra charge Surface entire body in basic or accent colour or colour according to RAL/NCS, per furniture item and colour 255 additional basic or accent colour or colour according to RAL/NCS, per furniture item and colour 185 covering top stained according to sample, per table and colour 255Extra charge Top panel furniture without top (supplied by 3rd party on site) 0

5515 6135 5815 5855 5870 5930 60201435

6495 7320 6895 6950 6965 7050 71751915

7480 8410 7980 8035 8070 8170 83202400

8450 9700 9065 9130 9165 9295 94752880

Retail in EURO excl. VAT

110

LIN Sideboard

Body Front and sides in aluminium, lacquered in basic colour or natural, black, bronze anodised

Inner side: MDF lacquered (colour as body)Top Lacquered in basic colour, solid wood or natural stone,

with profiled grips, if fronts are anodised, slate blackFront DoorsBase Bridge panel lacquered as bodyHeight 72 cm (Body 60 cm + Base 12 cm)

LIN Sideboard SB3Arrangement 3 doors, aluminium lacquered or anodised

1 adjustable shelf per section 1 box file height

Paint finish as body

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

Article W x D x H in cm

Natural stone (standard

range)

Entire body in basic colour + covering top in:

LINSB3LINSRWSB3

LINSB2LINSRWSB2

180 x 46 x 72Visible back

120 x 46 x 72Visible back

LIN Sideboard SB4Arrangement 4 doors, aluminium lacquered or anodised

1 adjustable shelf per section 1 box file height

LINSB4LINSRWSB4

240 x 46 x 72Visible back

LIN Sideboard SB2Arrangement 2 doors, aluminium lacquered or anodised

1 adjustable shelf per section 1 box file height

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

Extra charge Surface entire body in basic or accent colour or colour according to RAL/NCS, per furniture item and colour 255 additional basic or accent colour or colour according to RAL/NCS, per furniture item and colour 185 covering top stained according to sample, per table and colour 255Extra charge Top panel furniture without top (supplied by 3rd party on site) 0

5125 6060 5585 5630 5655 5750 58901435

4205 4835 4510 4540 4565 4620 4720960

6045 7290 6660 6725 6750 6885 70651915

111

Paint finish as body

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

Natural stone (standard

range)

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

Article W x D x H in cm Entire body in basic colour + covering topl in:

LIN Highboard

Body Front and sides in aluminium, lacquered in basic colour or natural, black, bronze anodised

Inner side: MDF lacquered (Colour as body)Top Lacquered in basic colour, solid wood or natural stone,

with profiled grips, if fronts are anodised, slate blackFront DoorsBase Bridge panel lacquered as bodyHeight 92 cm (Body 80 cm + Base 12 cm)

LIN Highboard HB3Arrangement 3 doors, aluminium lacquered or anodised

2 adjustable shelves per section 2 box file height

LIN Highboard HB4Arrangement 4 doors, aluminium lacquered or anodised

2 adjustable shelves per section 2 box file height

LIN Highboard HB5Arrangement 5 doors, aluminium lacquered or anodised

2 adjustable shelves per section 2 box file height

LIN Highboard HB6Arrangement 6 doors, aluminium lacquered or anodised

2 adjustable shelves per section 2 box file height

LINHB3LINSRWHB3

120 x 46 x 92Visible back

LINHB4LINSRWHB4

160 x 46 x 92Visible back

LINHB5LINSRWHB5

200 x 46 x 92Visible back

LINHB6LINSRWHB6

240 x 46 x 92Visible back

Extra charge Surface entire body in basic or accent colour or colour according to RAL/NCS, per furniture item and colour 255 additional basic or accent colour or colour according to RAL/NCS, per furniture item and colour 185 covering top stained according to sample, per table and colour 255Extra charge Top panel furniture without top (supplied by 3rd party on site) 0

5515 6135 5815 5855 5870 5930 60201435

6495 7320 6895 6950 6965 7050 71751915

7480 8410 7980 8035 8070 8170 83202400

8450 9700 9065 9130 9165 9295 94752880

Retail in EURO excl. VAT

112

LIN Midboard

Body Front and sides in aluminium, lacquered in basic colour or natural, black, bronze anodised

Inner side: MDF lacquered (colour as body)Top Lacquered in basic colour, solid wood or natural stone,

with profiled grips, if fronts are anodised, slate blackFront with flap (upcharge drawer see on the bottom of the page)Base Bridge panel lacquered as bodyHeight 52 cm (Body 40 cm + Base 12 cm)

LIN Midboard MB11Arrangement 1 section with 1 flap à 120 cm,

aluminium lacquered or anodised | 1 box file height

LINMB12LINSRWMB12

120 x 46 x 52Visible back

LIN Midboard MB12Arrangement 2 sections with 2 flaps à 60 cm,

aluminium lacquered or anodised | 1 box file height

LINMB22LINSRWMB22

180 x 46 x 52Visible back

LIN Midboard MB22Arrangement 2 sections with 2 flaps à 90 cm,

aluminium lacquered or anodised | 1 box file height

LINMB23LINSRWMB23

180 x 46 x 52Visible back

LIN Midboard MB23Arrangement 3 sections with 3 flaps à 60 cm,

aluminium lacquered or anodised | 1 box file height

LINMB32LINSRWMB32

240 x 46 x 52Visible back

LIN Midboard MB32Arrangement 2 sections with 2 flaps à 120 cm,

aluminium lacquered or anodised | 1 box file height

LINMB34LINSRWMB34

240 x 46 x 52Visible back

LIN Midboard MB34Arrangement 4 sections with 4 flaps à 60 cm,

aluminium lacquered or anodised | 1 box file height

Article W x D x H in cm Entire body in basic colour + covering top in:

LINMB11LINSRWMB11

120 x 46 x 52Visible back

Paint finish as body

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

Natural stone (standard

range)

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

Extra charge Surface entire body in basic or accent colour or colour according to RAL/NCS, per furniture item and colour 255 additional basic or accent colour or colour according to RAL/NCS, per furniture item and colour 185 covering top stained according to sample, per table and colour 255Extra charge Top panel furniture without top (supplied by 3rd party on site) 0Extra charge Drawer Drawer/s instead of flap/s, price per compartment 60 cm / 90 cm / 120 cm 210/290/360

3750 4375 4050 4090 4105 4165 4260535

4240 4855 4535 4575 4590 4650 4745535

4585 5515 5040 5085 5110 5205 5340805

5170 6095 5625 5685 5700 5795 5930805

5355 6600 5965 6025 6065 6200 63751075

6270 7515 6880 6950 6980 7110 72951075

113

LIN Midboardplus

Body Front and sides in aluminium, lacquered in basic colour or natural, black, bronze anodised with grip recess at the side

Inner side: MDF lacquered (colour as body)Top Lacquered in basic colour, solid wood or natural stone,

if fronts are anodised, slate blackFront with flap (upcharge drawer see on the bottom of the page)Base Bridge panel lacquered as bodyHeight 92 cm (Body 80 cm + Base 12 cm)

LIN Midboardplus MB111Arrangement 2 sections with 2 flaps à 120 cm,

aluminium lacquered or anodised | 2 box file height

LIN Midboardplus MB112Arrangement 4 sections with 4 flaps à 60 cm,

aluminium lacquered or anodised | 2 box file height

LIN Midboardplus MB122Arrangement 4 sections with 4 flaps à 90 cm,

aluminium lacquered or anodised | 2 box file height

LINMB111LINSRWMB111

120 x 46 x 92Visible back

LIN Midboardplus MB132Arrangement 4 sections with 4 flaps à 120 cm,

aluminium lacquered or anodised | 2 box file height

LINMB132LINSRWMB132

240 x 46 x 92Visible back

LINMB122LINSRWMB122

180 x 46 x 92Visible back

LINMB112LINSRWMB112

120 x 46 x 92Visible back

Article W x D x H in cm Gesamter Korpus Farblack (Basisfarbe) + Abdeckplatte in:

Paint finish as body

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

Natural stone (standard

range)

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

Extra charge Surface entire body in basic or accent colour or colour according to RAL/NCS, per furniture item and colour 255 additional basic or accent colour or colour according to RAL/NCS, per furniture item and colour 185 covering top stained according to sample, per table and colour 255Extra charge Top panel furniture without top (supplied by 3rd party on site) 0Extra charge Drawer Extra charge for drawer/s instead of flap/s, price for section width 60 cm/90 cm/120 cm 210/290/360 NOTE: Drawers only possible at the bottom

5120 5745 5420 5460 5475 5540 5625770

6925 7855 7380 7230 6905 7005 71451155

6095 6725 6400 6190 5915 5970 6070770

7350 8595 7965 7890 7515 7645 78301545

Retail in EURO excl. VAT

112

LIN Midboard

Body Front and sides in aluminium, lacquered in basic colour or natural, black, bronze anodised

Inner side: MDF lacquered (colour as body)Top Lacquered in basic colour, solid wood or natural stone,

with profiled grips, if fronts are anodised, slate blackFront with flap (upcharge drawer see on the bottom of the page)Base Bridge panel lacquered as bodyHeight 52 cm (Body 40 cm + Base 12 cm)

LIN Midboard MB11Arrangement 1 section with 1 flap à 120 cm,

aluminium lacquered or anodised | 1 box file height

LINMB12LINSRWMB12

120 x 46 x 52Visible back

LIN Midboard MB12Arrangement 2 sections with 2 flaps à 60 cm,

aluminium lacquered or anodised | 1 box file height

LINMB22LINSRWMB22

180 x 46 x 52Visible back

LIN Midboard MB22Arrangement 2 sections with 2 flaps à 90 cm,

aluminium lacquered or anodised | 1 box file height

LINMB23LINSRWMB23

180 x 46 x 52Visible back

LIN Midboard MB23Arrangement 3 sections with 3 flaps à 60 cm,

aluminium lacquered or anodised | 1 box file height

LINMB32LINSRWMB32

240 x 46 x 52Visible back

LIN Midboard MB32Arrangement 2 sections with 2 flaps à 120 cm,

aluminium lacquered or anodised | 1 box file height

LINMB34LINSRWMB34

240 x 46 x 52Visible back

LIN Midboard MB34Arrangement 4 sections with 4 flaps à 60 cm,

aluminium lacquered or anodised | 1 box file height

Article W x D x H in cm Entire body in basic colour + covering top in:

LINMB11LINSRWMB11

120 x 46 x 52Visible back

Paint finish as body

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

Natural stone (standard

range)

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

Extra charge Surface entire body in basic or accent colour or colour according to RAL/NCS, per furniture item and colour 255 additional basic or accent colour or colour according to RAL/NCS, per furniture item and colour 185 covering top stained according to sample, per table and colour 255Extra charge Top panel furniture without top (supplied by 3rd party on site) 0Extra charge Drawer Drawer/s instead of flap/s, price per compartment 60 cm / 90 cm / 120 cm 210/290/360

3750 4375 4050 4090 4105 4165 4260535

4240 4855 4535 4575 4590 4650 4745535

4585 5515 5040 5085 5110 5205 5340805

5170 6095 5625 5685 5700 5795 5930805

5355 6600 5965 6025 6065 6200 63751075

6270 7515 6880 6950 6980 7110 72951075

113

LIN Midboardplus

Body Front and sides in aluminium, lacquered in basic colour or natural, black, bronze anodised with grip recess at the side

Inner side: MDF lacquered (colour as body)Top Lacquered in basic colour, solid wood or natural stone,

if fronts are anodised, slate blackFront with flap (upcharge drawer see on the bottom of the page)Base Bridge panel lacquered as bodyHeight 92 cm (Body 80 cm + Base 12 cm)

LIN Midboardplus MB111Arrangement 2 sections with 2 flaps à 120 cm,

aluminium lacquered or anodised | 2 box file height

LIN Midboardplus MB112Arrangement 4 sections with 4 flaps à 60 cm,

aluminium lacquered or anodised | 2 box file height

LIN Midboardplus MB122Arrangement 4 sections with 4 flaps à 90 cm,

aluminium lacquered or anodised | 2 box file height

LINMB111LINSRWMB111

120 x 46 x 92Visible back

LIN Midboardplus MB132Arrangement 4 sections with 4 flaps à 120 cm,

aluminium lacquered or anodised | 2 box file height

LINMB132LINSRWMB132

240 x 46 x 92Visible back

LINMB122LINSRWMB122

180 x 46 x 92Visible back

LINMB112LINSRWMB112

120 x 46 x 92Visible back

Article W x D x H in cm Gesamter Korpus Farblack (Basisfarbe) + Abdeckplatte in:

Paint finish as body

BeechHeartwood

ash

SycamoreElm | Maple

Ash

CherryOak

Natural stone (standard

range)

Pear(over 180 cm

longitudinally jointed)

Black Walnutwith sapwood

Walnut(over 240 cm

longitudinally jointed)

Black Walnutwithout sapwood

Smoked oak

Extra charge Surface entire body in basic or accent colour or colour according to RAL/NCS, per furniture item and colour 255 additional basic or accent colour or colour according to RAL/NCS, per furniture item and colour 185 covering top stained according to sample, per table and colour 255Extra charge Top panel furniture without top (supplied by 3rd party on site) 0Extra charge Drawer Extra charge for drawer/s instead of flap/s, price for section width 60 cm/90 cm/120 cm 210/290/360 NOTE: Drawers only possible at the bottom

5120 5745 5420 5460 5475 5540 5625770

6925 7855 7380 7230 6905 7005 71451155

6095 6725 6400 6190 5915 5970 6070770

7350 8595 7965 7890 7515 7645 78301545

Retail in EURO excl. VAT

114

Painted shelf(price added or deducted)

LINFA Side- or Highboard section width 60 cmSide- or Highboard section width 90 cmSide- or Highboard section width 120 cm

1 item1 item1 item

LIN Options

Inner drawersThe inner drawers can be mounted individually in pre-drilled holes.1 item.Version: Sides in aluminium as the front, other parts lacquered in body colour

LINIS1SBLINIS40HBLINIS80HBLINIS60MBLINIS90MBLINIS120MB

SideboardHighboard section width 40 cmHighboard section width 80 cmMidboard/Midboardplus section width 60 cmMidboard/Midboardplus section width 90 cmMidboard/Midboardplus section width 120 cm

up to 3 inner drawers possible per unit, dep. on heightup to 5 inner drawers possible per unit, dep. on heightup to 5 inner drawers possible per unit, dep. on height1 inner drawers possible per unit1 inner drawers possible per unit1 inner drawers possible per unit

1 item1 item1 item1 item1 item1 item

Decor stripFor a rounded framing of the top decor strip in aluminium 5 mm the same as the front and outer body

LINDS Decor strip in aluminium 5 mm per section

7590

110

160

530485585530615665

LYN

116

117

117

117

118

118

118

119

120

121

Rectangular or Sailform

Flow

Drawer

Move (extra charge adjustable height)

Meeting wedge-shaped / Meeting Rectangular

Head table

Folding table (extra charge)

Meeting configuration examples

Position of base

Accessories

114

Painted shelf(price added or deducted)

LINFA Side- or Highboard section width 60 cmSide- or Highboard section width 90 cmSide- or Highboard section width 120 cm

1 item1 item1 item

LIN Options

Inner drawersThe inner drawers can be mounted individually in pre-drilled holes.1 item.Version: Sides in aluminium as the front, other parts lacquered in body colour

LINIS1SBLINIS40HBLINIS80HBLINIS60MBLINIS90MBLINIS120MB

SideboardHighboard section width 40 cmHighboard section width 80 cmMidboard/Midboardplus section width 60 cmMidboard/Midboardplus section width 90 cmMidboard/Midboardplus section width 120 cm

up to 3 inner drawers possible per unit, dep. on heightup to 5 inner drawers possible per unit, dep. on heightup to 5 inner drawers possible per unit, dep. on height1 inner drawers possible per unit1 inner drawers possible per unit1 inner drawers possible per unit

1 item1 item1 item1 item1 item1 item

Decor stripFor a rounded framing of the top decor strip in aluminium 5 mm the same as the front and outer body

LINDS Decor strip in aluminium 5 mm per section

7590

110

160

530485585530615665

LYN

116

117

117

117

118

118

118

119

120

121

Rectangular or Sailform

Flow

Drawer

Move (extra charge adjustable height)

Meeting wedge-shaped / Meeting Rectangular

Head table

Folding table (extra charge)

Meeting configuration examples

Position of base

Accessories

116

Selection, 28 mm thickness

Article L x W x H in cm Table area m2 Beech Heartwood

ash

SycamoreElm / Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnut(with sapwood)

Walnut(over 240 cm

longitudinally jointed)

Black Walnut(without sapwood)

Smoked oak

LY180P28 180 x 90 x 74 1.62LY200P28 200 x 90 x 74 1.80LY220P28 220 x 90 x 74 1.98LY240P28 240 x 90 x 74 2.16LY260P28 260 x 100 x 74 2.60LY280P28 280 x 100 x 74 2.80LY300P28 300 x 110 x 74 3.30Surface diffference per m2 for non-standard sizes

Selection, 40 mm thickness

Article L x W x H in cm Table area m2 Beech Heartwood

ash

SycamoreElm / Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnut(with sapwood)

Walnut(over 240 cm

longitudinally jointed)

Black Walnut(without sapwood)

Smoked oak

LY180P40 180 x 90 x 75 1.62LY200P40 200 x 90 x 75 1.80LY220P40 220 x 90 x 75 1.98LY240P40 240 x 90 x 75 2.16LY260P40 260 x 100 x 75 2.60LY280P40 280 x 100 x 75 2.80LY300P40 300 x 110 x 75 3.30LY320P40 320 x 110 x 75 3.52LY340P40 340 x 110 x 75 3.74LY360P40 360 x 110 x 75 3.96LY380P40 380 x 110 x 75 4.18LY400P40 400 x 120 x 75 4.80Surface diffference per m2 for non-standard sizes

Naturart, 40 mm thickness

Article L x W x H in cm Table area m2 Heartwood beech

naturart

Elm naturart

Sycamore Oak

naturart

Walnut naturart

(lenght over 280 cm please demand)

LYN180P40N 180 x 90 x 75 1.62LYN200P40N 200 x 90 x 75 1.80LYN220P40N 220 x 90 x 75 1.98LYN240P40N 240 x 90 x 75 2.16LYN260P40N 260 x 100 x 75 2.60LYN280P40N 280 x 100 x 75 2.80LYN300P40N 300 x 110 x 75 3.30LYN320P40N 320 x 110 x 75 3.52LYN340P40N 340 x 110 x 75 3.74LYN360P40N 360 x 110 x 75 3.96LYN380P40N 380 x 110 x 75 4.18LYN400P40N 400 x 120 x 75 4.80Surface diffference per m2 for non-standard sizes

LYNX Rectangular or Sailform right / left

Top Solid wood, selection, 28 mm or 40 mm thicknessEdge K75 (BV28) and K25 (BV40)

Cornerdetail Radius 1 cmSurface lacquered, oiled or soapedBase 2 Metal legs with a visible mounting connector,

powder coated 5 colours: Styl 22 IGP, Styl 23 IGP, Styl 28 IGP,

Trend 8 IGP, Classic 38 IGPDesign Dante Bonuccelli

Right Left

3335 3580 3870 4190 48503580 3870 4190 4615 53703860 4175 4540 5020 58804135 4480 4890 5470 64154735 5160 5665 6415 76005370 5845 6390 7250 85506215 6775 7440 8525 101001040 1175 1400 1500 1825

3670 4035 4415 4935 57953965 4380 4815 5460 64504280 4745 5235 5985 70954595 5125 5655 6545 77855310 5950 6605 7740 92905690 6385 7115 8410 101106535 7375 8240 9860 119256965 7880 8825 10640 128957415 8395 9420 11450 139007870 8930 10040 12290 149458330 9465 10650 13150 160109445 10775 12145 15185 185501040 1175 1400 1500 1825

3320 3540 3775 49153580 3840 4095 54403830 4115 4400 59704080 4380 4700 65354700 5080 5460 77605090 5515 5945 84255845 6345 6860 99006695 7235 7800 112057040 7625 8215 120257380 8020 8645 128807740 8410 9090 137508680 9450 10230 158201040 1175 1400 1825

117

Selection, 28 mm thickness

Article L x W1/W2 x H in cm Table area m2 Beech Heartwood

ash

SycamoreElm / Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnut(with sapwood)

Walnut(over 240 cm

longitudinally jointed)

Black Walnut(without sapwood)

Smoked oak

LYF260 260 x 120/ 80 x 74 3.12LYF280 280 x 120/ 80 x 74 3.60LYF300 300 x 130/ 80 x 74 3.90LYF320 320 x 130/ 90 x 74 4.16LYF340 340 x 140/ 90 x 74 4.76LYF360 360 x 140/100 x 74 5.04LYF380 380 x 150/100 x 74 5.70LYF400 400 x 150/110 x 74 6.00Surface diffference per m2 for non-standard sizes

LYNX Flow

Top Solid wood, selection, 28 mm thicknessEdge K75Surface lacquered, oiled or soapedBase 2 Metal legs with a visible mounting connector,

powder-coated 5 colours: Styl 22 IGP, Styl 23 IGP, Styl 28 IGP,

Trend 8 IGP, Classic 38 IGPDesign Dante Bonuccelli

LYNX Drawer

Dimensions W 430 x D 590 x H 120 mmFront solid woodBody solid wood, bottom in metal, black lacqueredInner drawer solid wood, leather bottom, plug socket, 1x power, 2x USB Charger Surface lacquered, oiled or soapedExternal plug socket sidewise incorporated, 1x power, 1x double RJ45, 2x USB Charger

Drawer Electrification inside and outsideDrawer only with external plug socketDrawer without plug socket

Types of solid wood All types of wood sime price

LYNX Move (Extra charge)

Electrical height adjustment 72 – 122 cm Switch either left or right Incl. horizontal and vertical cable channel

Extra charge on standard LYNX rectangular or sailform table Max. table top size 320 x 110 cm

LYNXMV Adjustable height

Extra charge Surface Table stained according to sample, per table and colour 255Extra charge Base Base steel powder-coated in not standard colour, per base and per colour on demand Gloss chrome version, per base 1510Option Table lengthening Slider Disc with leveling feet, optionally with felt or Teflon glider 140

5390 5915 6510 7405 88205775 6345 7000 8035 95957200 7870 8650 9935 117907640 8365 9210 10660 126908550 9385 10380 12135 145059040 9950 11005 12970 1554010060 11115 12325 14670 1765510595 11715 13005 15635 188301040 1175 1400 1500 1825

297523651595

1120

Retail in EURO excl. VAT

116

Selection, 28 mm thickness

Article L x W x H in cm Table area m2 Beech Heartwood

ash

SycamoreElm / Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnut(with sapwood)

Walnut(over 240 cm

longitudinally jointed)

Black Walnut(without sapwood)

Smoked oak

LY180P28 180 x 90 x 74 1.62LY200P28 200 x 90 x 74 1.80LY220P28 220 x 90 x 74 1.98LY240P28 240 x 90 x 74 2.16LY260P28 260 x 100 x 74 2.60LY280P28 280 x 100 x 74 2.80LY300P28 300 x 110 x 74 3.30Surface diffference per m2 for non-standard sizes

Selection, 40 mm thickness

Article L x W x H in cm Table area m2 Beech Heartwood

ash

SycamoreElm / Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnut(with sapwood)

Walnut(over 240 cm

longitudinally jointed)

Black Walnut(without sapwood)

Smoked oak

LY180P40 180 x 90 x 75 1.62LY200P40 200 x 90 x 75 1.80LY220P40 220 x 90 x 75 1.98LY240P40 240 x 90 x 75 2.16LY260P40 260 x 100 x 75 2.60LY280P40 280 x 100 x 75 2.80LY300P40 300 x 110 x 75 3.30LY320P40 320 x 110 x 75 3.52LY340P40 340 x 110 x 75 3.74LY360P40 360 x 110 x 75 3.96LY380P40 380 x 110 x 75 4.18LY400P40 400 x 120 x 75 4.80Surface diffference per m2 for non-standard sizes

Naturart, 40 mm thickness

Article L x W x H in cm Table area m2 Heartwood beech

naturart

Elm naturart

Sycamore Oak

naturart

Walnut naturart

(lenght over 280 cm please demand)

LYN180P40N 180 x 90 x 75 1.62LYN200P40N 200 x 90 x 75 1.80LYN220P40N 220 x 90 x 75 1.98LYN240P40N 240 x 90 x 75 2.16LYN260P40N 260 x 100 x 75 2.60LYN280P40N 280 x 100 x 75 2.80LYN300P40N 300 x 110 x 75 3.30LYN320P40N 320 x 110 x 75 3.52LYN340P40N 340 x 110 x 75 3.74LYN360P40N 360 x 110 x 75 3.96LYN380P40N 380 x 110 x 75 4.18LYN400P40N 400 x 120 x 75 4.80Surface diffference per m2 for non-standard sizes

LYNX Rectangular or Sailform right / left

Top Solid wood, selection, 28 mm or 40 mm thicknessEdge K75 (BV28) and K25 (BV40)

Cornerdetail Radius 1 cmSurface lacquered, oiled or soapedBase 2 Metal legs with a visible mounting connector,

powder coated 5 colours: Styl 22 IGP, Styl 23 IGP, Styl 28 IGP,

Trend 8 IGP, Classic 38 IGPDesign Dante Bonuccelli

Right Left

3335 3580 3870 4190 48503580 3870 4190 4615 53703860 4175 4540 5020 58804135 4480 4890 5470 64154735 5160 5665 6415 76005370 5845 6390 7250 85506215 6775 7440 8525 101001040 1175 1400 1500 1825

3670 4035 4415 4935 57953965 4380 4815 5460 64504280 4745 5235 5985 70954595 5125 5655 6545 77855310 5950 6605 7740 92905690 6385 7115 8410 101106535 7375 8240 9860 119256965 7880 8825 10640 128957415 8395 9420 11450 139007870 8930 10040 12290 149458330 9465 10650 13150 160109445 10775 12145 15185 185501040 1175 1400 1500 1825

3320 3540 3775 49153580 3840 4095 54403830 4115 4400 59704080 4380 4700 65354700 5080 5460 77605090 5515 5945 84255845 6345 6860 99006695 7235 7800 112057040 7625 8215 120257380 8020 8645 128807740 8410 9090 137508680 9450 10230 158201040 1175 1400 1825

117

Selection, 28 mm thickness

Article L x W1/W2 x H in cm Table area m2 Beech Heartwood

ash

SycamoreElm / Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnut(with sapwood)

Walnut(over 240 cm

longitudinally jointed)

Black Walnut(without sapwood)

Smoked oak

LYF260 260 x 120/ 80 x 74 3.12LYF280 280 x 120/ 80 x 74 3.60LYF300 300 x 130/ 80 x 74 3.90LYF320 320 x 130/ 90 x 74 4.16LYF340 340 x 140/ 90 x 74 4.76LYF360 360 x 140/100 x 74 5.04LYF380 380 x 150/100 x 74 5.70LYF400 400 x 150/110 x 74 6.00Surface diffference per m2 for non-standard sizes

LYNX Flow

Top Solid wood, selection, 28 mm thicknessEdge K75Surface lacquered, oiled or soapedBase 2 Metal legs with a visible mounting connector,

powder-coated 5 colours: Styl 22 IGP, Styl 23 IGP, Styl 28 IGP,

Trend 8 IGP, Classic 38 IGPDesign Dante Bonuccelli

LYNX Drawer

Dimensions W 430 x D 590 x H 120 mmFront solid woodBody solid wood, bottom in metal, black lacqueredInner drawer solid wood, leather bottom, plug socket, 1x power, 2x USB Charger Surface lacquered, oiled or soapedExternal plug socket sidewise incorporated, 1x power, 1x double RJ45, 2x USB Charger

Drawer Electrification inside and outsideDrawer only with external plug socketDrawer without plug socket

Types of solid wood All types of wood sime price

LYNX Move (Extra charge)

Electrical height adjustment 72 – 122 cm Switch either left or right Incl. horizontal and vertical cable channel

Extra charge on standard LYNX rectangular or sailform table Max. table top size 320 x 110 cm

LYNXMV Adjustable height

Extra charge Surface Table stained according to sample, per table and colour 255Extra charge Base Base steel powder-coated in not standard colour, per base and per colour on demand Gloss chrome version, per base 1510Option Table lengthening Slider Disc with leveling feet, optionally with felt or Teflon glider 140

5390 5915 6510 7405 88205775 6345 7000 8035 95957200 7870 8650 9935 117907640 8365 9210 10660 126908550 9385 10380 12135 145059040 9950 11005 12970 1554010060 11115 12325 14670 1765510595 11715 13005 15635 188301040 1175 1400 1500 1825

297523651595

1120

Retail in EURO excl. VAT

118

LYNX Meeting wedge-shaped right/lleft / Meeting Rectangular

Top Solid wood, selection, 28 mm thicknessEdge K15, K25, K64Cornerdetail Radius 1 cmSurface lacquered, oiled or soapedBase 2 Metal legs with a visible mounting connector,

powder-coated 5 colours: Styl 22 IGP, Styl 23 IGP, Styl 28 IGP, Trend 8 IGP, Classic 38 IGP

Slider Adjustable, disc colour as base with Teflon or felt insertConnectors 2 table connectors on both connecting edgesDesign Dante Bonuccelli

Selection, 28 mm thickness

Article L x W1/W2 x H in cm Table area m2 Beech Heartwood

ash

SycamoreElm / Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnut(with sapwood)

Walnut(over 240 cm

longitudinally jointed)

Black Walnut(without sapwood)

Smoked oak

LYM180 180 x 90/80 x 74 1.62LYM200 200 x 95/80 x 74 1.90LYM220 220 x 95/80 x 74 2.09LYM240 240 x 100/85 x 74 2.40LYM260 260 x 100/85 x 74 2.60LYM280 280 x 105/85 x 74 2.94LYM300 300 x 105/85 x 74 3.15Surface difference per m2 for non-standard sizes

Selection, 28 mm thickness

Article L x W1/W2 x H in cm Table area m2 Beech Heartwood

ash

SycamoreElm / Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnut(with sapwood)

Walnut(over 240 cm

longitudinally jointed)

Black Walnut(without sapwood)

Smoked oak

LYK180 180 x 81 x 74 1.46Surface diffference per m2 for non-standard

LYNX Head table

Top Solid wood, selection, 28 mm thicknessEdge K15, K25, K64Cornerdetail Radius 1 cmSurface lacquered, oiled or soapedBase 1 Crossfoot element with cable feedthrough

in steel powder-coated 5 colours: Styl 22 IGP, Styl 23 IGP, Styl 28 IGP,

Trend 8 IGP, Classic 38 IGPSlider Adjustable, disc colour as base with Teflon or felt insertConnectors 2 table connectors on both connecting edgesDesign Dante Bonuccelli

LYNX Folding table (Extra charge)

Extra charge on standard LYNX Meeting wedge-shaped or Meeting rectangular max. width 110 cm

LYNXKLB foldable

3480 3720 4010 4330 49903835 4135 4485 4920 57004125 4455 4855 5345 62354390 4925 5395 6000 70304875 5305 5805 6555 77405665 6160 6740 7620 89656340 6730 7350 8430 99401040 1175 1400 1500 1825

2815 3010 3235 3495 40201040 1175 1400 1500 1825

Extra charge Surface Table stained according to sample, per table and colour 255 Extra charge Base Base steel powder-coated in not standard colour, per base and per colour on demand Gloss chrome version, per base 1510 Gloss chrome version, per cross leg element 1155 Casters ( 5 cm) instead of sliders, per table 55Options 1 piece of GST18 power cable, integrated on the underside of the tabletop. Price per table 220

270

119

LYNX Meeting

Configuration examples

Retail in EURO excl. VAT

118

LYNX Meeting wedge-shaped right/lleft / Meeting Rectangular

Top Solid wood, selection, 28 mm thicknessEdge K15, K25, K64Cornerdetail Radius 1 cmSurface lacquered, oiled or soapedBase 2 Metal legs with a visible mounting connector,

powder-coated 5 colours: Styl 22 IGP, Styl 23 IGP, Styl 28 IGP, Trend 8 IGP, Classic 38 IGP

Slider Adjustable, disc colour as base with Teflon or felt insertConnectors 2 table connectors on both connecting edgesDesign Dante Bonuccelli

Selection, 28 mm thickness

Article L x W1/W2 x H in cm Table area m2 Beech Heartwood

ash

SycamoreElm / Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnut(with sapwood)

Walnut(over 240 cm

longitudinally jointed)

Black Walnut(without sapwood)

Smoked oak

LYM180 180 x 90/80 x 74 1.62LYM200 200 x 95/80 x 74 1.90LYM220 220 x 95/80 x 74 2.09LYM240 240 x 100/85 x 74 2.40LYM260 260 x 100/85 x 74 2.60LYM280 280 x 105/85 x 74 2.94LYM300 300 x 105/85 x 74 3.15Surface difference per m2 for non-standard sizes

Selection, 28 mm thickness

Article L x W1/W2 x H in cm Table area m2 Beech Heartwood

ash

SycamoreElm / Maple

Ash

CherryOak

Pear(over 180 cm

longitudinally jointed)

Black Walnut(with sapwood)

Walnut(over 240 cm

longitudinally jointed)

Black Walnut(without sapwood)

Smoked oak

LYK180 180 x 81 x 74 1.46Surface diffference per m2 for non-standard

LYNX Head table

Top Solid wood, selection, 28 mm thicknessEdge K15, K25, K64Cornerdetail Radius 1 cmSurface lacquered, oiled or soapedBase 1 Crossfoot element with cable feedthrough

in steel powder-coated 5 colours: Styl 22 IGP, Styl 23 IGP, Styl 28 IGP,

Trend 8 IGP, Classic 38 IGPSlider Adjustable, disc colour as base with Teflon or felt insertConnectors 2 table connectors on both connecting edgesDesign Dante Bonuccelli

LYNX Folding table (Extra charge)

Extra charge on standard LYNX Meeting wedge-shaped or Meeting rectangular max. width 110 cm

LYNXKLB foldable

3480 3720 4010 4330 49903835 4135 4485 4920 57004125 4455 4855 5345 62354390 4925 5395 6000 70304875 5305 5805 6555 77405665 6160 6740 7620 89656340 6730 7350 8430 99401040 1175 1400 1500 1825

2815 3010 3235 3495 40201040 1175 1400 1500 1825

Extra charge Surface Table stained according to sample, per table and colour 255 Extra charge Base Base steel powder-coated in not standard colour, per base and per colour on demand Gloss chrome version, per base 1510 Gloss chrome version, per cross leg element 1155 Casters ( 5 cm) instead of sliders, per table 55Options 1 piece of GST18 power cable, integrated on the underside of the tabletop. Price per table 220

270

119

LYNX Meeting

Configuration examples

Retail in EURO excl. VAT

120

55 cm

55 cm

60 cm50 cm

26,5 cm

21,5 cm

36,5 cm

31,5 cm

46,5 cm

41,5 cm

56,5 cm

51,5 cm

65 cm

65 cm

75 cm

75 cm

85 cm

85 cm

Base 60 cm

Base 50 cm

180–230 cmFrame 55 cm indented

231–310 cmFrame 65 cm indented

311–370 cmFrame 75 cm indented

371–400 cmFrame 85 cm indented

from width 90 to 110 cm from width 111 to 150 cm

LYNX

121

STWA1STWAB1STWRG1STWML1STL

KK6

NXKS

LPRE

Lid in aluminium brushed with natural anodised finishLid in aluminium brushed with bronze or black anodised finish Lid in oiled untreated steel or chromium-platedLid in solid wood or leather black1 bar configurated as requested Lid only, WITHOUT box and sockets, reduced price

Cable Channel Set (horizontal)Attached directly under the table top to carry cables, made from perforated black sheet, and is the same length as the table top, 1 set consists of 3 sections à 50 cm

X x 6 x 3 perforated black sheet metal

Cable shoe Is attached to the table edge and holds and also conceals cables.

20 x 10 x 10 lacquered in basic colors

Black leather desk blotterThere are two versions of the leather writing surface.

70 x 45 Rectangular / oval

on demand

LYNX Accessories

USBCMO

CP

USB Charger Moduleis recessed under the table top, fix positionHousing in aluminum black anodizedUSB-double charging unit 5V/2,4AIncl. 3 m Power connection cord

W 8 x H 2.5 x D 5

W 8 x H 2.5 x D 5

CablePortOnly for edge profile K25 and K64. In steel black powder coated.Slides over the edge of the table and is secured with two knurled screws.Incl. Power bar with 4 plug-ins.Standard configuration: 2 x Power, 1 x USB double Charger 1 x blankIncl. 3 m Power cord, exclusive data cords

1 item1 item1 item1 item

1 item

1 Set

1 item

1 item

Power outlet box with hinged lid (one side useable)

Recommended for all conference tables for multiple media plug-ins. Cut out with hinged lid in different versions.Recessed power bar holder in black finish with 4 plug-ins.Cut out size in table top approx. 25 x 12 cm.Standard configuration: 2 x power, 2 x blankConnecting cable not included

870101510551075

-160

435

180

525

290

770

Retail in EURO excl. VAT

120

55 cm

55 cm

60 cm50 cm

26,5 cm

21,5 cm

36,5 cm

31,5 cm

46,5 cm

41,5 cm

56,5 cm

51,5 cm

65 cm

65 cm

75 cm

75 cm

85 cm

85 cm

Base 60 cm

Base 50 cm

180–230 cmFrame 55 cm indented

231–310 cmFrame 65 cm indented

311–370 cmFrame 75 cm indented

371–400 cmFrame 85 cm indented

from width 90 to 110 cm from width 111 to 150 cm

LYNX

121

STWA1STWAB1STWRG1STWML1STL

KK6

NXKS

LPRE

Lid in aluminium brushed with natural anodised finishLid in aluminium brushed with bronze or black anodised finish Lid in oiled untreated steel or chromium-platedLid in solid wood or leather black1 bar configurated as requested Lid only, WITHOUT box and sockets, reduced price

Cable Channel Set (horizontal)Attached directly under the table top to carry cables, made from perforated black sheet, and is the same length as the table top, 1 set consists of 3 sections à 50 cm

X x 6 x 3 perforated black sheet metal

Cable shoe Is attached to the table edge and holds and also conceals cables.

20 x 10 x 10 lacquered in basic colors

Black leather desk blotterThere are two versions of the leather writing surface.

70 x 45 Rectangular / oval

on demand

LYNX Accessories

USBCMO

CP

USB Charger Moduleis recessed under the table top, fix positionHousing in aluminum black anodizedUSB-double charging unit 5V/2,4AIncl. 3 m Power connection cord

W 8 x H 2.5 x D 5

W 8 x H 2.5 x D 5

CablePortOnly for edge profile K25 and K64. In steel black powder coated.Slides over the edge of the table and is secured with two knurled screws.Incl. Power bar with 4 plug-ins.Standard configuration: 2 x Power, 1 x USB double Charger 1 x blankIncl. 3 m Power cord, exclusive data cords

1 item1 item1 item1 item

1 item

1 Set

1 item

1 item

Power outlet box with hinged lid (one side useable)

Recommended for all conference tables for multiple media plug-ins. Cut out with hinged lid in different versions.Recessed power bar holder in black finish with 4 plug-ins.Cut out size in table top approx. 25 x 12 cm.Standard configuration: 2 x power, 2 x blankConnecting cable not included

870101510551075

-160

435

180

525

290

770

Retail in EURO excl. VAT

WEDA

124

125

Bench

Lounge

WEDA

124

125

Bench

Lounge

124

Article L x W x H in cm Upholstery Amount of fabric (rm) Fabric width 1.40 m

Amount of leather (m2)

Heartwood ash,

black stained

Ash Oak Black Walnut without sapwood

WER140 140 x 49 x 76 Fabric Revive1 1.75 rmFabric Hero 1.75 rmLeather Linea 4.9 m2

Leather Ascot 4.9 m2

WER160 160 x 49 x 76 Fabric Revive1 1.95 rmFabric Hero 1.95 rmLeather Linea 5.2 m2

Leather Ascot 5.2 m2

WER180 180 x 49 x 76 Fabric Revive1 2.15 rmFabric Hero 2.15 rmLeather Linea 5.5 m2

Leather Ascot 5.5 m2

WER200 200 x 49 x 76 Fabric Revive1 2.35 rmFabric Hero 2.35 rmLeather Linea 5.8 m2

Leather Ascot 5.8 m2

WER220 220 x 49 x 76 Fabric Revive1 2.55 rmFabric Hero 2.55 rmLeather Linea 6.1 m2

Leather Ascot 6.1 m2

WER240 240 x 49 x 76 Fabric Revive1 2.75 rmFabric Hero 2.75 rm Leather Linea 6.4 m2

Leather Ascot 6.4 m2

Total width of bench = seat width + 6 cmExample: WER140 = 140 cm + 6 cm = 146 cm total width

WEDA Bench | with backrest

Frame Solid woodSurface lacquered, oiled or soapedUpholstery Seat and back: fixed upholstery Cover in leather: Linea or Ascot Cover in fabric: Revive1 or HeroSeat hight 45 cmDesign Daniel Wehrli

Additional charges for special Please note: Special lengths of between 140 and 240 cm are only possible in 10 cm lengths: increments. They will be charged on the basis of the next smallest size. 310 Special lengths of less than 140 cm and more than 240 cm. Price on demand Material delivered Optional upholstery: Cover material provided (must be checked in advance to ensure that it can be used). The amount of leather needed depends on the quality and thus the yield. Please contact us for advice. Price on demand

2470 2405 2435 26102595 2535 2565 27402865 2810 2840 30153175 3110 3150 33202595 2535 2570 27602740 2680 2715 29002995 2940 2975 31603320 3260 3300 34852720 2655 2700 29052885 2820 2860 30653120 3060 3105 33103465 3400 3445 36452850 2785 2830 30503060 2995 3045 32603270 3215 3255 34703630 3565 3605 38253015 2950 2995 32303190 3130 3175 34053435 3370 3415 36503785 3725 3775 40053185 3120 3175 34253360 3300 3350 36003590 3525 3575 38253965 3900 3945 4195

125

WEDA Lounge

Frame Solid woodSurface lacquered, oiled or soapedUpholstery Seat an back: fixed upholstery

Cover in Leather: Linea oder Ascot Cover in fabric: Revive1 oder Hero

Seat hight 40 cmDesign Daniel Wehrli

Article L x W x H in cm Upholstery Amount of fabric (rm) Fabric width 1.40 m

Amount of leather (m2)

Heartwood ash,

black stained

Ash Oak Black Walnut without sapwood

WEL1 70 x 74 x 68 Fabric Revive1 1.66 rmFabric Hero 1.66 rmLeather Linea 4.5 m2

Leather Ascot 4.5 m2

Article L x W x H in cm Upholstery Amount of fabric (rm) Fabric width 1.40 m

Amount of leather (m2)

Heartwood ash,

black stained

Ash Oak Black Walnut without sapwood

WEL2 140 x 74 x 68 Stoff Revive1 2.10 Lfm.Stoff Hero 2.10 Lfm.Leder Linea 9.0 m2

Leder Ascot 9.0 m2

Additional charges for special lengths Price on demand Material delivered Optional upholstery: Cover material provided (must be checked in advance to ensure that it can be used). The amount of leather needed depends on the quality and thus the yield. Please contact us for advice. Price on demand

2100 2080 2130 24502200 2180 2230 25552410 2390 2440 27552500 2480 2520 2845

2625 2605 2650 30152770 2750 2805 31603380 3360 3405 37653630 3605 3660 4010

Retail in EURO excl. VAT

124

Article L x W x H in cm Upholstery Amount of fabric (rm) Fabric width 1.40 m

Amount of leather (m2)

Heartwood ash,

black stained

Ash Oak Black Walnut without sapwood

WER140 140 x 49 x 76 Fabric Revive1 1.75 rmFabric Hero 1.75 rmLeather Linea 4.9 m2

Leather Ascot 4.9 m2

WER160 160 x 49 x 76 Fabric Revive1 1.95 rmFabric Hero 1.95 rmLeather Linea 5.2 m2

Leather Ascot 5.2 m2

WER180 180 x 49 x 76 Fabric Revive1 2.15 rmFabric Hero 2.15 rmLeather Linea 5.5 m2

Leather Ascot 5.5 m2

WER200 200 x 49 x 76 Fabric Revive1 2.35 rmFabric Hero 2.35 rmLeather Linea 5.8 m2

Leather Ascot 5.8 m2

WER220 220 x 49 x 76 Fabric Revive1 2.55 rmFabric Hero 2.55 rmLeather Linea 6.1 m2

Leather Ascot 6.1 m2

WER240 240 x 49 x 76 Fabric Revive1 2.75 rmFabric Hero 2.75 rm Leather Linea 6.4 m2

Leather Ascot 6.4 m2

Total width of bench = seat width + 6 cmExample: WER140 = 140 cm + 6 cm = 146 cm total width

WEDA Bench | with backrest

Frame Solid woodSurface lacquered, oiled or soapedUpholstery Seat and back: fixed upholstery Cover in leather: Linea or Ascot Cover in fabric: Revive1 or HeroSeat hight 45 cmDesign Daniel Wehrli

Additional charges for special Please note: Special lengths of between 140 and 240 cm are only possible in 10 cm lengths: increments. They will be charged on the basis of the next smallest size. 310 Special lengths of less than 140 cm and more than 240 cm. Price on demand Material delivered Optional upholstery: Cover material provided (must be checked in advance to ensure that it can be used). The amount of leather needed depends on the quality and thus the yield. Please contact us for advice. Price on demand

2470 2405 2435 26102595 2535 2565 27402865 2810 2840 30153175 3110 3150 33202595 2535 2570 27602740 2680 2715 29002995 2940 2975 31603320 3260 3300 34852720 2655 2700 29052885 2820 2860 30653120 3060 3105 33103465 3400 3445 36452850 2785 2830 30503060 2995 3045 32603270 3215 3255 34703630 3565 3605 38253015 2950 2995 32303190 3130 3175 34053435 3370 3415 36503785 3725 3775 40053185 3120 3175 34253360 3300 3350 36003590 3525 3575 38253965 3900 3945 4195

125

WEDA Lounge

Frame Solid woodSurface lacquered, oiled or soapedUpholstery Seat an back: fixed upholstery

Cover in Leather: Linea oder Ascot Cover in fabric: Revive1 oder Hero

Seat hight 40 cmDesign Daniel Wehrli

Article L x W x H in cm Upholstery Amount of fabric (rm) Fabric width 1.40 m

Amount of leather (m2)

Heartwood ash,

black stained

Ash Oak Black Walnut without sapwood

WEL1 70 x 74 x 68 Fabric Revive1 1.66 rmFabric Hero 1.66 rmLeather Linea 4.5 m2

Leather Ascot 4.5 m2

Article L x W x H in cm Upholstery Amount of fabric (rm) Fabric width 1.40 m

Amount of leather (m2)

Heartwood ash,

black stained

Ash Oak Black Walnut without sapwood

WEL2 140 x 74 x 68 Stoff Revive1 2.10 Lfm.Stoff Hero 2.10 Lfm.Leder Linea 9.0 m2

Leder Ascot 9.0 m2

Additional charges for special lengths Price on demand Material delivered Optional upholstery: Cover material provided (must be checked in advance to ensure that it can be used). The amount of leather needed depends on the quality and thus the yield. Please contact us for advice. Price on demand

2100 2080 2130 24502200 2180 2230 25552410 2390 2440 27552500 2480 2520 2845

2625 2605 2650 30152770 2750 2805 31603380 3360 3405 37653630 3605 3660 4010

Retail in EURO excl. VAT

+41 62 769 70 00+41 62 769 70 09www.mobimex.ch

Mobimex AGBirren 17CH-5703 Seon

TelefonFaxWeb