Power Cables Division - Elsewedy Electric

All Rights reserved©ElsewedyelectricPB www.elsewedyelectric.com 1

Wire

s and

Cab

les C

atel

ogue

WIR

E A

ND

CA

BLE

Power Cables Division

WIR

E A

ND

CA

BLE


INDEX

Corporate Profile 03

Overhead Conductors 07

Low Voltage Cables 11

Medium Voltage Cables 21

High Voltage and Extra High Voltage Cables 27

OPGW Cables 31

High Temprature Low Sag (HTLS) Conductors 32

Special Cables 39

Factory Brief 45

From our Cables Design 46

Testing Capability 49

Certificates 50

Facts and Figures 52

Sustainability 53

Contacts 55

20K+KiloMetersDistributionNetworks

3.7K+KiloMeters

OverheadTransmission

Lines

2K+KiloMeters

Communication Networks

25MSquare Meters

SustainableIndustral

Communities

64+Substations

Indoor & Outdoor Substations

FINANCIALSTRENGTH

PRODUCTDIVERSITY

SECTOREXPERTISE

GEAOGRAPHICALREACH

Group strategy and market opportunitiesElsewedy Electric 80 years ago, we started with a clear vision to position Elsewedy Electric for successful growth, inspired by innovation, determination and spirit of hardworking staff, empow-ered and liberated by a strong enter-prise system. Since our start, we made the decision of never sacrificing integri-ty for growth & this same motto did not change till today.Behind our success is professional dedicated team and the latest tech-nologies which deliver comprehensive product portfolio and unmatched ser-vices. Elsewedy Electric always deliv-ers top-rated products & services that customers need with the highest quality. Our creative solutions help corporations

Elsewedy Electric is a conglomerate that specializes in Infrastructure, products and solutions. We are segmented to 5 divisions: Wire & Cable, Electrical Products, Engineering & Contracting, Smart Infrastructure and Infrastructure Invest-ments. Our founding fathers started the journey back in 1938 and we have been growing ever since to be what we are now, the biggest infrastructure solutions provider in the Middle East and Africa.

Behind our success is 15,000 professionals located in 45 counties using the latest technologies to design and engineer a vast product portfolio and unmatched services. We strive to deliver top-quality products & services that meet our customers’ expectations while adding value to the communities we serve.

23Giga WattsTotal number of delivered

power

PRODUCTIONFACILITIES

OPERATIONCOUNTRIES

EXPORTINGCOUNTRIES22 17 110

Global Presence

We are a global wire and cable manufacturer with more than 40 years of experience in the industry. We pride ourselves for our superior product quality and numerous cer-tifications. Our manufacturing capacity is close to 280k+ Tons annual total capacity located in several countries. We offer a wide range of power & special cables as well as cable accessories that are currently used in more than 100 countries worldwide.

UP TO

500KVAccording toInternational

Standards

12FactoriesWorldwide

280 TonsAnnual Total

Capacity

k+

Wire & CableBusiness Line

All Rights reserved©Elsewedyelectric5

Wire

s and

Cab

les C

atel

ogue

Power Cables

We have the most comprehensive range of power cables on the market. Listed below are the design, voltage and basic specifications. For more details, including technical information, advice on cable selection and handling and laying instructions please download our Power Cables Catalogue.

The region relies on Elsewedy Electric cables

We have the most comprehensive range of power cables on the market. Listed below are the design, voltage and basic specifications.

For more details, including technical information, advice on cable selection and handling and laying instructions please

Download Power Cables Catalogue

WIR

E A

ND

CA

BLE

www.elsewedyelectric.com 6


Overhead Conductors

PRODUCT RANGE

1. Overhead transmission line AAC, AAAC, ACSR, AACSR, ACC & ABC insulated2. Low voltage cables from 500 V up to 3.3 kV3. Medium voltage cables from 6 kV up to 36 kV, XLPE insulated4. High voltage cables from 45 kV up to 150 kV, XLPE insulated5. Extra high voltage cables from 220 kV up to 500 kV, XLPE insulated6. Optical ground wires (OPGW), central & stranded design7. Thermal Conductor (HTLS)


Overhead Conductors

WIR

E A

ND

CA

BLE

Bare Hard and Soft Drawn Copper Conductors.

A) Hard drawn conductor:

› DescriptionPlain bare hard drawn copper conductors as per BS7884 , DIN 48201

B) Soft drawn conductor:

› DescriptionPlain bare soft copper conductors used for grounding electrical systems As per BS EN 60228 , IEC 60228

All Aluminum Conductors (AAC)

› DescriptionHard drawn Aluminum wires, stranded in successive layers, in opposite direction to form the Aluminum stranded AAC conductor, As per BS EN 50182 or IEC 61089, ASTM B231.

All Rights reserved©Elsewedyelectric9 www.elsewedyelectric.com 10

Wire

s and

Cab

les C

atel

ogue

Overhead ConductorsOverhead ConductorsW

IRE

AN

D C

ABL

E

› DescriptionAll Aluminum alloy (ALMELEC) conductors, stranded in successive layers to form the stranded AAAC conductor. As per IEC 61089 or BS EN 50182 or ASTM B 399.

All Aluminum Alloy Conductors (AAAC)

Aluminum Conductor Steel Reinforced (ACSR)

› DescriptionAn outer layer of Aluminum conductor concentrically stranded over the central core of galvanized solid or stranded steel wires to form Aluminum Steel reinforced conductor. As per BS EN 50182 or ASTM B 232 or IEC 61089.

Aluminum Conductor Aluminum Clad Steel Reinforced (ACSR/AW)

› DescriptionAn outer layer of Aluminum conductor concentrically stranded over the central core of aluminum clad steel solid or stranded to form Aluminum Aluminum Clad Steel Reinforced conductor. As per ASTMB549, BS 50182.


Wire

s and

Cab

les C

atel

ogue

Overhead ConductorsOverhead Conductors

WIR

E A

ND

CA

BLE

Areal Bundled Cables (ABC)

Copper conductor insulated by XLPE

› DescriptionThis type of cables is made from Copper Conductor insulated by XLPE insulation and assembled together to form two (Duplex), three (Triplex), four (Quadruplex) or more conductors. As per ICEA S-76-474, BS 7884 or according to customer specifications.

› DescriptionThis type of cables is made from Aluminum Conductor insulated by XLPE insulation and assembled together to form two (Duplex), three (Triplex), four (Quadruplex) or more conductors. As per ICEA S-76-474, BS EN 50182 or according to customer specifications.

Aluminum conductor insulated by XLPE

Aluminum Conductor Aluminum Alloy Reinforced (ACAR)

› DescriptionAn Outer layer of Aluminum stranded over center core of Aluminum AlloyReinforced. As per ASTM B524, IEC 61089.


Wire

s and

Cab

les C

atel

ogue

Low Voltage CablesLow Voltage CablesW

IRE

AN

D C

ABL

E

Low Voltage Cables

Product Types

1- Indoor wires: voltage up to 450/750 V2- Building Wire : U.S. Market (600-2000) V3- LV cables : Voltage up to 0.6/1 KV or 1.8/3(3.6) or 1.9/3.3 (3.6) kV


Wire

s and

Cab

les C

atel

ogue

Low Voltage CablesLow Voltage Cables

WIR

E A

ND

CA

BLE


Wire

s and

Cab

les C

atel

ogue


IRE

AN

D C

ABL

E

Single Core Cables with Stranded Copper Conductors and PVC or LSHF Insulated 750/450 V

Single Core Cables with Stranded Copper orAluminum Conductors with XLPE insulated

Indoor wires: voltage up to 450/750 V

Building Wire - U.S. Market: voltage up tp 2000 V

Single Core Cables with Flexible 450/750 V Copper Conductors and PVC or LSHF Insulated

› Description• Soft annealed stranded copper conductor insulated with PVC compound rated to 70 °c or 90 °c or 105 °c. According to

IEC 60227 & BS EN 50525-2-31 (H07V-R ) or insulated with LSHF compound Rated to 90°c according to BS 50525-3-41 (H07Z-R).

› Application• For indoor fixed installations in dry locations, laid in conduits, as well as in steel support brackets.

› Description• Stranded copper or Aluminum conductor insulated with XLPE compound rated to 75 °C or 90 °C wet & Dry. accord-ing to UL 44. (XHH, XHHW, XHHW-2, RHH, RHW & RHW-2).

› Application• For indoor fixed installations in dry locations, laid in conduits, as well as in steel support brackets.• For use in power and control circuits in switchboards, control panels and raceways.

› Description• Soft annealed copper fine wires, bunched together in subunits or stranded Bunched groups into a main Units, which

forms the flexible conductor. Insulated with soft PVC 70 °c or 90 °c Or 105 °c compound . According to IEC 60227 ,BS EN 50525-2-31 (H07V-K) , CEI UNEL 35716 (FS17) or insulated With low smoke halogen.Free compound ac-cording to BS EN 50525-3-41 (H07Z-K).

› Application• For indoor filed installations in dry locations where particular flexibility is required. For electrical panels connection or for

electrical apparatus they can be laid in groups around steel sheets.


Wire

s and

Cab

les C

atel

ogue


WIR

E A

ND

CA

BLE

LV CABLES: voltage up to 1.8/3 (3.6) KV or 1 900 / 3 300 (3 600) V

Single Core Cables with Stranded Copper or Aluminum Conductors PVC insulated or PVC insulated with Nylon Jacket

Single Core Unarmored Cables

› Description• Soft annealed stranded copper conductor. insulated with PVC compound rated 70°C or 90°C or 105°C an sheathe

with pvc compound layer according to IEC 60502-1 or HD 603 S1-3G (NYY) or HD 603 S1-3A (EYY) or VDE 0250-204 300/500 V (NYM).

• Soft annealed stranded copper conductor. insulated with XLPE compound rated 90 °c and sheathed with PVC com-pound layer according to IEC 60502-1 (N2XY) or BS 7889.

• Soft annealed stranded copper conductor insulated with XLPE compound rated 90 °c and sheathed with LSHF compound layer according to IEC 60502-1 (N2XH) or BS 8573.

› Application• For outdoor and indoor installations in damp and wet locations. They are normally used for power distribution in urban networks, industrial plants, as well as in thermopower and hydropower stations.

Single Core Cables, with Stranded Circular Copper Conductors, PVC or XLPE Insulated and PVC or LSHF Sheathed

› Description• stranded copper or Aluminum conductor insulated with PVC compound or PVC/NYLON rated to 75 °C or 90 °C

Wet & Dry. according to UL 83. (THW, THW-2, THHW, TW, THHN, THWN & THWN-2)

› Application• For indoor filed installations in dry locations where particular flexibility is required. For electrical panels• High Speed jacket designed to improve installation even under the most difficult conditions


Wire

s and

Cab

les C

atel

ogue


IRE

AN

D C

ABL

E Single Core Unarmored Cables

› Description• Soft annealed stranded aluminum conductor insulated with PVC compound rated 70°C or 90°C or 105°C and

sheathed with pvc compound layer according to IEC 60502-1or HD 603 S1-3G (NAYY) or HD 603 S1-3A (EAYY).• Soft annealed stranded aluminium conductor insulated with XLPE compound rated 90°C and sheathed with PVC

compound layer according to IEC 60502-1 (NA2XY).• Soft annealed stranded aluminium conductor insulated with XLPE compound rated 90°C and sheathed with LSHF

compound layer according to IEC 60502-1 (NA2XH).

› Application• For outdoor and indoor installations in damp and wet locations. They are normally used for power distribution in urban networks, industrial plants, as well as in thermopower and hydropower stations.

Single Core Cables, with Stranded CircularAluminium Conductors, PVC or XLPEInsulated and PVC or LSHF Sheathed

Single Core Cables, with stranded Circular copper or Aluminum conductors, XLPE or PVC insulated, Copper Tape shieldand PVC or LSHF Sheath

› Description• Soft stranded copper or aluminum conductor, insulated with XLPE compound rated 90 °C Shielded with copper tape

and sheathed with PVC or LSHF compound layer.• Soft stranded copper or aluminum conductor, insulated with PVC compound rated 70° OR 90 °C OR 105 °C

Shielded with copper tape and sheathed with PVC compound layer.• All Cable are produced according to IEC 60502-1.

› Application• For outdoor and indoor installations in damp and wet locations. They are normally used for power distribution in urban

networks, industrial plants, as well as in thermopower and hydropower stations.


Wire

s and

Cab

les C

atel

ogue


WIR

E A

ND

CA

BLESingle Core ATA Cables

Single Core Cables, With Stranded CopperConductors, PVC or XLPE insulation,Aluminum Tape Armoured, and PVCor LSHF Sheathed.

Single Core Cables, With StrandedAluminium Conductors, PVC or XLPEinsulation, Aluminium Tape Armoured, and PVC or LSHF Sheathed.

› Description• Soft annealed copper conductor, insulated with PVC compound rated 70 °C or 90 °C or 105 °C, aluminum tape

armoured and sheathed with pvc compound layer.• Soft annealed copper conductor, insulated with XLPE compound rated 90 °C, aluminum tape armoured and sheathed

with pvc compound layer.• Soft annealed copper conductor, insulated with XLPE compound rated 90 °C, aluminum tape armoured and sheathed

with lshf compound layer.• All cables are produced according to IEC 60502-1.

› Application• For outdoor and indoor installation in damp and wet locations where mechanical damages are expected to occur.

› Description• Soft annealed aluminum conductor, insulated with PVC compound rated 70 °C or 90 °C or 105 °C, aluminum tape

armoured and sheathed with pvc compound layer.• Soft annealed aluminium conductor, insulated with XLPE compound rated 90 °C, aluminum tape armoured and

sheathed with pvc compound layer.• Soft annealed aluminium conductor,insulated with XLPE compound rated 90 °C, aluminum tape armoured and

sheathed with LSHF compound layer.• All cables are produced according to IEC 60502-1 .

› ApplicationFor outdoor and indoor installation in damp and wet locations where mechanical damages are expected to occur.


Wire

s and

Cab

les C

atel

ogue


IRE

AN

D C

ABL

E Single Core AWA Cables

Single Core Cables, With Stranded Copper Conductors, XLPE or PVC insulation Alu-minum Wire armored, and PVC or LSHF Sheathed.

Single Core Cables, With Stranded Alumi-num Conductors, XLPE or PVC insulation, Aluminum Wire Armored, and PVC or LSHF Sheathed.

› Description• Soft annealed copper conductor, insulated with PVC compound rated 70°C or 90°C or 105°C aluminum wire

armoured and sheathed with PVC compound layer according to IEC 60502-1.• Soft annealed copper conductor, insulated with XLPE compound rated 90 °C, Aluminum Wire Armoured and

sheathed with PVC compound layer according to IEC 60502-1 or BS 5467.• Soft annealed copper conductor, insulated with XLPE compound rated 90 °C, Aluminum Wire Armoured and

sheathed with LSHF compound layer according to IEC 60502-1 or BS 6724.


› Description• Soft annealed Aluminum conductor, insulated with PVC compound rated 70 °C OR 90 °C OR 105 °C Aluminum

Wire Armoured and sheathed with PVC compound layer.• Soft annealed Aluminum conductor, insulated with XLPE compound rated 90 °C, Aluminum Wire Armoured and

sheathed with PVC compound layer.• Soft annealed Aluminum conductor, insulated with XLPE compound rated 90 °C, Aluminum Wire Armoured and

sheathed with LSHF compound layer.• All Cables are produced according to IEC 60502-1.



Wire

s and

Cab

les C

atel

ogue


WIR

E A

ND

CA

BLEMulti Core Unarmoured Cables

Multi Core Cables, with stranded copper orAlminum conductors,PVC or XLPE insulated,copper tape shield and PVC or LSHF Sheath.

Multicore cables, with strandedcopper conductors xlpe or pvcinsulated and PVC or LSHF sheathed.

› Description• Soft stranded copper or aluminum conductor, insulated with PVC compound rated 70° OR 90 °C OR 105 °C

Compound assembled together, Shielded with copper tape and sheathed with PVC compound layer.• Soft stranded copper or aluminum conductor, insulated with XLPE 90 °C Compound assembled together, Shielded

with copper tape and sheathed with PVC compound layer.• All Cable are produced according to IEC 60502-1.

› Application• For outdoor and indoor installation in damp and wet locations. They are normally used for power distribution in

urban networks, industrial plants, as well as in the thermopower and hydropower stations.

› Description• multi-core cables of stranded copper conductors are insulated with PVC compound rated 70°c or 90°c or 105°c

assembled together, covered with overall jacket of PVC compound according to IEC 60502-1 or HD 603 S1-3G (NYY) or HD 603 S1-3A (EYY) OR VDE 0250-204 300/500V (NYM).

• multi-core cables of stranded copper conductors are insulated with XLPE compound rate 90°c, assembled together, covered with overall jacket of PVC compound according to IEC 60502-1 (N2XY) , BS 7889.

• multi-core cables of stranded copper conductors are insulated with XLPE compound rate 90°c, assembled together, covered with overall jacket of LSHF compound, according to IEC 60502-1 (N2XH).

› Application• For outdoor and indoor installations in damp and wet locations.


Wire

s and

Cab

les C

atel

ogue


IRE

AN

D C

ABL

E

› Description• Multi-core cables of stranded aluminium conductors are insulated with PVC compound rated 70°C or 90 °C or 105

°C assembled together, covered with overall jacket of PVC compound layer according to IEC 60502-1 or HD 603 S1-3G (NAYY) or HD 603 S1-3A (EAYY).

• Multi-core cables of stranded aluminium conductors are insulated with XLPE compound rated 90°C, assembled together, covered with overall jacket of PVC compound layer according to IEC 60502-1 (NA2XY).

• Multi-core cables of stranded aluminium conductors are insulated with XLPE compound rated 90°C, assembled together, covered with overall jacket of LSHF compound layer according to IEC 60502-1 (NA2XH)

› .Application• For outdoor and indoor installations in damp and wet locations.

› Description•Multicore cables of stranded Aluminum conductors are insulated with PVC compound rated 70°C or 90°C or 105°C,

assembled together, armoured with steel tape and covered with overall jacket of PVC compound.•Multi core cables of stranded Aluminum conductors are insulated with XLPE compound rated 90°C, assembled

together, armoured with steel tape and covered with overall jacket of PVC compound.•Multi core cables of stranded Aluminum conductors are insulated with XLPE compound rated 90°C, assembled

together, armoured with steel tape and covered with overall jacket of LSHF compound.•All Cables are produced according to IEC 60502-1.

› .Application• For outdoor installations in damp and wet locations, where mechanical damages are expected to occur.

› Description•Multi-core cables of stranded Copper conductors are insulated with PVC compound rated 70°C or 90°C or 105°C,

assembled together, armoured with steel tape and covered with overall jacket of PVC compound.•Multi-core cables of stranded Copper conductors are insulated with XLPE compound rated 90°C, assembled

together, armoured with steel tape and covered with overall jacket of PVC compound.•Multi-core cables of stranded Copper conductors are insulated with XLPE compound rated 90°C, assembled

together, armoured with steel tape and covered with overall jacket of LSHF compound.•All Cables are produced according to IEC 60502-1.

› .Application• For outdoor installations in damp and wet locations, where mechanical damages are expected to occur.

Multi Core STA Cables

Multi-core Cables, with StrandedCopper Conductors, XLPE or PVCInsulated, Steel TapeArmored andPVC or LSHF Sheathed.

Multicore Cables, with Stranded Aluminum-Conductors, XLPE or PVC Insulated, Steel Tape Armored and PVC or LSHF Sheathed.

Multicore Cables, with Stranded Aluminium Conductor with PVC or XLPE Insulation and PVC or LSHF Sheathed.


Wire

s and

Cab

les C

atel

ogue


WIR

E A

ND

CA

BLE

› Description•Multi-core cables of stranded copper conductors are insulated with pvc compound rated 70°C or 90°C or 105°C

assembled together, armoured with steel wires and covered with overall jacket of pvc compound according to IEC 60502-1 .

•Multi-core cables of stranded copper conductors are insulated with XLPE compound rated 90°C, assembled together, armoured with steel wires and covered with overall jacket of PVC compound according to IEC 60502-1 or BS 5467.

•Multi-core cables of stranded copper conductors are insulated with XLPE compound rated 90°C, assembled together, armoured with steel wires and covered with overall jacket of LSHF compound according to IEC 60502-1, BS 6724 or BS 6724.

› ApplicationFor outdoor installations in damp wet locations where mechanical damages are expected to occur.

Multi Core SWA Cables

Multi-core Cables, with StrandedCopper Conductors, XLPE or PVC Insulated, SteelWire Armored andPVC or LSHF Sheathed.

Multi-core Cables, with Stranded Aluminum Conductors, XLPE or PVCInsulated, Steel Wire Armored and PVC or LSHF Sheathed.

› Description•Multi-core cables of stranded Aluminum conductors are insulated with pvc compound rated 70°C or 90°C or 105°C

assembled together, armoured with steel wires and covered with overall jacket of pvc compound.•Multi-core cables of stranded Aluminum conductors are insulated with XLPE compound rated 90°C, assembled

together, armoured with steel wires and covered with overall jacket of PVC compound.•Multi-core cables of stranded Aluminum conductors are insulated with XLPE compound rated 90°C, assembled

together, armoured with steel wires and covered with overall jacket of LSHF compound•All Cables are produced according to IEC 60502-1.

› Application• For outdoor installations in damp wet locations where mechanical damages are expected to occur.

WIR

E A

ND

CA

BLE

Voltage grade

• 3.6/6 kV or 3.8/6.6 kV• 6/10 kV or 6.35/11 kV• 8.7/15 kV• 12/20 kV or 12.7/22 kV• 18/30 kV or 19/33 kV

Medium Voltage Cables

WIR

E A

ND

CA

BLE


Wire

s and

Cab

les C

atel

ogue

Medium Voltage CablesMedium Voltage CablesW

IRE

AN

D C

ABL

E Single core Unarmoured Cables from 6 kV up to 35 kV

Three Core Cables, with strandedCircularcopperor Aluminum conductors,XLPEinsulated, and PVC or LSHF or PE Sheath.

Multi Core Unarmored Cable from 6 kV up to 35 kV

› Description• Stranded circular compacted copper or aluminum conductor, Semi-conducting layer as conductor screen, XLPE

insulated, semi-conducting layer as non metallic insulation screen, copper tape or wire metallic insulation screen,or other equivalent material and PVC or PE sheathed according to IEC 60502-2,

• Stranded circular compacted copper or aluminum conductor, Semi-conducting layer as conductor screen,XLPE insulated, semi-conducting layer as non metallic insulation screen, copper tape or wire metallic insulation screen,or other equivalent material and LSHF sheathed according to IEC 60502-2

,› Application• These cables are generally suitable for direct burial or for installation on trays or in ducts..

Single Core Cables, with stranded Circular copper or Aluminum conductors, XLPEinsulated, and PVC or LSHF or PE Sheath

› Description• Stranded circular compacted copper or aluminum conductor, Semi-conducting layer as conductor screen,

XLPEinsulated, semi-conducting layer as non metallic insulation screen, copper tape or wire as metallic insulationscreen, cores are assembled together with non hygroscopic polypropylene fillers

and wrapped with binder tape, and PVC or PE sheathed according to IEC 60502-2,• Stranded circular compacted copper or aluminum conductor, Semi-conducting layer as conductor screen,XLPE insulated,

semi-conducting layer as non metallic insulation screen, copper tape or wire as metallicinsulation screen, cores are assembled together with non hygroscopic polypropylene fillers and wrapped with binder tape, and LSHF sheathed according to IEC 60502-2,

› Application• These cables are generally suitable for direct burial or for installation on trays or in ducts.


Wire

s and

Cab

les C

atel

ogue

Medium Voltage CablesMedium Voltage Cables

WIR

E A

ND

CA

BLESingle Core ATA Cables From 6 kV up to 35 kV


insulated, semi-conducting layer as non metallic insulation screen, copper tape or wire as metallic insulation screen, covered with a layer of PVC compound or other equivalent material as bedding layer, aluminum wire armoured and PVC or PE sheath according to IEC 60502-2

• Stranded circular compacted copper or aluminum conductor, Semi-conducting layer as conductor• screen, XLPE insulated, semi-conducting layer as non metallic insulation screen, copper tape or wire• as metallic insulation screen, covered with a layer of LSHF compound or other equivalent material as bedding layer,

aluminum wire armoured and LSHF sheath according to IEC 60502-2


Three Core STA Cables From 6 kV up to 35 kV


insulated, semi-conducting layer as non metallic insulation screen, copper tape or wire as metallic insulation screen, or other equivalent materials cores are assembled together with non hygroscopic polypropylene fillers and wrapped with binder tape, covered with a layer of PVC compound or other equivalent material as bedding,or filling material ,steel tape armoured and PVC or PEsheathed.

• Stranded circular compacted copper or aluminum conductor, Semi-conducting layer as conductor screen,XLPE insulated, semi-conducting layer as non metallic insulation screen, copper tape or wire as metallic insulation screen,or other equivalent materials cores are assembled together with non hygroscopic polypropylene fillers and wrapped with binder tape, covered with a layer of LSHF compound or other equivalent material as bedding,or filling material ,steel tape armoured and LSHF sheathed.

• ALL Cables are produced according to IEC 60502-2.


Single Core Cables, with strandedCircular copper or Aluminum conductors,XLPE insulated, Aluminum tape armored,and PVC or LSHF or PE Sheath

Three Core Cables, with stranded Circular copper or Aluminum conductors, XLPE insulated,Steel tape armoured and PVC or LSHF orPE Sheath


Wire

s and

Cab

les C

atel

ogue

Medium Voltage CablesMedium Voltage CablesW

IRE

AN

D C

ABL

E Single Core AWA Cable from from 6 kV up to 35 kV

Multi Core SWA Cables from From 6 kV up to 35 kV


insulated, semi-conducting layer as non metallic insulation screen, copper tape or wire as metallic insulation screen, covered with a layer of PVC compound or other equivalent material as bedding layer, aluminum wire armoured and PVC or PE sheathed according to IEC 60502-2, BS 6622.

• Stranded circular compacted copper or aluminum conductor, Semi-conducting layer as conductor screen, XLPE insulated, semi-conducting layer as non metallic insulation screen, copper tape or wire as metallic insulation screen, covered with a layer of LSHF compound or other equivalent material as bedding layer, aluminum wire armoured and LSHF sheathed according to IEC 60502-2, BS 7835.,


Single Core Cables, with stranded Circularcopper or Aluminum conductors, XLPE insulated,aluminum wire armoured and PVCor LSHF or PE Sheath.

Three Core Cables, with stranded Circular copperor Aluminum conductors, XLPE insulated, Steelwire armored and PVC or LSHF or PE Sheath

› Description•Stranded circular compacted copper or aluminum conductor, Semi-conducting layer as conductor screen, XLPE

insulated, semi-conducting layer as non metallic insulation screen, copper tape or wire as metallic insulation screen,or other equivalent materials cores are assembled together with nonhygroscopic polypropylene fillers and wrapped with binder tape, covered with a layer of PVC compound or other equivalent material as bedding,or filling material steel wire armoured and PVC or PE sheathed according to IEC 60502-2 or BS 6622.

•Stranded circular compacted copper or aluminum conductor, Semi-conducting layer as conductor screen, XLPE insulated, semi-conducting layer as non metallic insulation screen, copper tape or wire as metallic insulation screen,or other equivalent materials cores are assembled together with nonhygroscopic polypropylene fillers and wrapped with binder tape, covered with a layer of LSHF compound or other equivalent material as bedding,or filling material steel wire armoured and LSHF sheathed according to IEC 60502-2 or BS 7835.



Wire

s and

Cab

les C

atel

ogue

Medium Voltage CablesMedium Voltage Cables

WIR

E A

ND

CA

BLE


Wire

s and

Cab

les C

atel

ogue

HV & Extra HV Power CablesHV & Extra HV Power CablesW

IRE

AN

D C

ABL

E

Our high & extra voltage power cables range are copper or alumi-num conductor up to C.S.A of 3000mm2insulated by XLPE on VCV or CCV lines with different metallic screen/sheath, i.e Copper wire screen, Aluminumwire screen. Aluminum corrugated sheath, Lead alloy sheathed and aluminum or copper l aminated foiltape or any combination from previous materials with operating voltage up to 500KV

DTS could be equipped by adding optical fibers tube inside EHV cable

Flame retardnat outer jacket are available upon request

According to IEC 60840, IEC 62067, BS 7912, BS 7970, HD 632, AEIC CS9, ICEA S-108-720

High Voltage & Extra High Voltage

Power Cables45kV up to 500kV


Wire

s and

Cab

les C

atel

ogue

HV & Extra HV Power CablesHV & Extra HV Power Cables

WIR

E A

ND

CA

BLE


Wire

s and

Cab

les C

atel

ogue

HV & Extra HV Power CablesHV & Extra HV Power CablesW

IRE

AN

D C

ABL

E High Voltage & Extra High Voltage Power Cables

Single core Copper /Aluminumconductor, XLPE insulated Copper wire screen Aluminum laminated foil and HDPE she (Cu/XLPE/CWS/HDPE).

Single core Copper / aluminum conductor, XLPE insulated "Lead Sheathed and HDPE sheath (Cu/XLPE/LEAD/HDPE)"

Our high & extra voltage power cables range are copper or aluminum conductor up to C.S.A of 3000mm2 insulated byXLPE on VCV or CCV lines with different metallic screen/sheath, i.e Copper wire screen, Aluminum wire screen.Aluminum corrugated sheath, Lead alloy sheathed and aluminum or copper laminated foil tape or any combination fromprevious materials with operating voltage up to 500KVDTS could be equipped by adding optical fibers tube inside EHV cable

Flame retardnat outer jacket are available upon request

According to IEC 60840, IEC 62067, BS 7912, BS 7970, HD 632, AEIC CS9, ICEA S-108-720


Wire

s and

Cab

les C

atel

ogue

HV & Extra HV Power CablesHV & Extra HV Power Cables

WIR

E A

ND

CA

BLE

Single core Copper /Aluminum conductor, XLPE insulated Copper wire screen "Lead alloysheath and HDPE sheath (Cu/XLPE/CWS/LEAD/HDPE)".

Single core Copper /Aluminum conductor, XLPE insulated Copper wire screen "Lead alloy sheath Copper Tape and HDPE sheath (Cu/XLPE/CWS/LEAD/CT/HDPE)".

Single core Copper /Aluminum conductor, XLPE insulated "Aluminum Corrugated sheath and HDPE sheath (Cu/XLPE/CorrALT/HDPE)."

WIR

E A

ND

CA

BLE


Wire

s and

Cab

les C

atel

ogue

WIR

ES A

ND

CA

BLES

OPGW Cables

• These conductors are suitable for installation as optical ground wire in power line installations.• The conductors acts as normal ground wire protecting phase wires from lighting strikes and carries earth fault currents.

• The conductors provides also an optic path in power line installations for telecommunication needs.

› Features

• Installation in the same way as normal ground wire with conventional machinery.• Most reliable optic solution for fiber optic utilities.• Best solution in old ground wire replacement and in new line constructions.• Low cost

• SingleStrandingLayers, Central SST OPGW• SingleStranding Layers, Central ACST OPGW• SingleStrandingLayers, Central AT OPGW• DoubleStrandingLayers, Central SST OPGW• DoubleStrandingLayers, Central ACST OPGW• DoubleStrandingLayers, Central AT OPGW• DoubleStranding Layers, Lateral Position SST /ACST OPGW

SST: Stainless steel tubeACST: Aluminum coated Stainless steel tubeAT: Aluminum Tube

› Installation Live Line Installation We are one of the most advanced and leading cables manufacturer in the Middle East & Africa with a great history in engineering, implementing and managing major fiber optic networks.

Our frame of work, mainly, outlines the OPGW & Optical fiber cables in an evolved, innovated, state-of-the Art and latest technology Modules. The advanced Technology provided reflects wide latitude of matching and conformity with the supper design and luxury planning.

Generally, we follow the customer's specification to meet the stated requirements. Through offering our in house produced OPGW cables as, a perfect match solution to the required specifications with much more features to serve the advanced telecommunication application through optical fibers.

Furthermore, we cover the customer's scope of supply completely with state-of the art technology of OPGW, optical fiber cables, fittings and accessories to fulfil the projects turnkey activities.

› Installation Steps:

PRODUCT RANGE

1Basic Controls

2Stringing Speed

3Pulling Tension

4Minimum Bending Radius

WIR

E A

ND

CA

BLE

Wire

s and

Cab

les C

atel

ogue

WIR

E A

ND

CA

BLE

High Temperature Low Sag (HTLS)

ConductorsOverview:

The High Temperature Low Sag (HTLS) conductors help our customers and utilities to optimize the efficiency of overhead lines.

Large quantities of transmitted electrical power would be needed due to cities' & industrial expansion, population increase all over the world has led to either to build new transmission lines or use HTLS conductors.

Because of high cost of installation of new transmission lines, time involved and difficulty in acquiring tower sites-right of way, HTLS is the best solution for reconductoring existing lines to increase power flow and also for new lines to accommodate future contingencies and increased demand of power.

HTLS conductors consists of new developed Aluminum materials that are able to operate continuously at higher temperatures up to °150C - °250C, while materials used for traditional types of overhead conductors such as AAAC and ACSR are limited to maximum operating temperature of °80C."

WIR

E A

ND

CA

BLE


Wire

s and

Cab

les C

atel

ogue

HTLS ConductorsHTLS ConductorsW

IRE

AN

D C

ABL

E

The High Temperature Low Sag (HTLS) conductors help our customers and utilities to optimize the efficiency of overhead lines.

Large quantities of transmitted electrical power would be needed due to cities' & industrial expansion, population increase all over the world has led to either to build new transmission lines or use HTLS conductors.

Because of high cost of installation of new transmission lines, time involved and difficulty in acquiring tower sites-right of way, HTLS is the best solution for reconductoring existing lines to increase power flow and also for new lines to accommodate future contingencies and increased demand of power.

HTLS conductors consists of new developed Aluminum materials that are able to operate continuously at higher temperatures up to 150°C - 250°C, while materials used for traditional types of overhead conductors such as AAAC and ACSR are limited to maximum operating temperature of 80°C.

HTLS "High Temperature Low Sag Conductors"

Table 2

High Temperature Low Sag Conductors TypesOuter Layer(s) Type

1350-OFully Annealed

Aluminum

AT1Thermal-ResistantAluminum Alloy

AT2Extra High-StrengthThermal-ResistantAluminum Alloy

AT3Super

Thermal-ResistantAluminum Alloy

AT4Extra

Thermal-ResistantAluminum Alloy

Cent

ral C

ore

Type

Carbon-Glass Fiber Composite Core ACCC

Galvanized Steel Core ACSS TACSR Hi-TACSR

Zinc-5% Aluminum Mischmetal Alloy-Coated Steel Core (Galfan) ACSS/MA* 2)

Aluminum-Clad Steel Core ACSS/AW TACSR/AW Hi-TACSR/AW

Galvanized Invar Core TACIR 1) Hi-TACIR 1) STACIR 1) XTACIR 1)

Aluminum-Clad Invar Core TACIR/AW 1) Hi-TACIR/AW 1) STACIR/AW XTACIR/AW

Note:All abovementioned conductor types can be offered with round wires or trapezoidal wires (TW), except the ACCC that shall be with trapezoidal wires only.1) These types aren't commonly used.2) There are different gardes of Mischmetal Alloy-Coated Steel Core such as MA2, MA3, MA4, MA5.

Maximum Operating Temprature for Overhead Conductors

80

300

Temprature (°C)

250

200

150

100 ACSR AAAC

TACSRTACSR/AW

Hi-TACSRHi-TACSR/AW

STACIR/AWXTACIR/AW

ACCCACSS/AW

ACSS/MA

1350-O(Fully Annealed Aluminum)

AT4(XTAL)

AT3(STAL)

AT2(Hi-TAL)

AT1(TAL)

Al/Si/Mg(AAL)

1350-14H(HAL)

50

0

80

150 150210 230

180 200250


Wire

s and

Cab

les C

atel

ogue

HTLS ConductorsHTLS Conductors

WIR

E A

ND

CA

BLEAluminum Conductor Composite Core (ACCC)

› DescriptionAluminum Conductor Composite Core (ACCC) is a concentrically stranded conductor with two or more layers of trapezoidal shaped annealed 1350-O aluminum wires on a central core of light weight Carbon-Glass fiber composite.

Aluminum Conductor Steel Supported (ACSS/MA)

› DescriptionAluminum Conductor Steel Supported (ACSS) consists of one or more layers of annealed aluminum 1350-O wires stranded over a central core of zinc coated steel wires or 5% aluminum mischmetal alloy-coated steel wires that is designed to withstand most or all of the mechanical load on ACSS.ACSS conductors are manufactured according to ASTM B 856, other standards could be offered.

› DescriptionAluminum Conductor Aluminum-Clad Steel Supported (ACSS/AW) consists of one or more layers of annealed aluminum 1350-O wires stranded over a central core of aluminum clad steel wires that is designed to withstand most or all of the mechanical load on ACSS/AW.ACSS/AW conductors are manufactured according to ASTM B 856, other standards could be offered.

Aluminum Conductor Aluminum-Clad Steel Supported (ACSS/AW)

Thermal Resistant Aluminum Alloy Conductor Steel Reinforced (TACSR)

› DescriptionThermal Resistant Aluminum Alloy Conductor Steel Reinforced (TACSR) consists of one or more layers of thermal resistant aluminium zirconium alloy (AT1) wires stranded over a central core of zinc coated steel wire(s).TACSR conductors are manufactured according to IEC 62004 and IEC 60888 and generally according to IEC 61089, other standards could be offered.


Wire

s and

Cab

les C

atel

ogue

HTLS ConductorsHTLS ConductorsW

IRE

AN

D C

ABL

E Thermal Resistant Aluminum Alloy Conductor AluminumClad Steel Reinforced (TACSR/AW)

› DescriptionThermal Resistant Aluminum Alloy Conductor Aluminum-Clad Steel Reinforced (TACSR/AW) consists of one or more layers of thermal resistant aluminium zirconium alloy (AT1) wires stranded over a central core of stranded aluminum-clad steel (20SA Type A) wire(s) .TACSR/AW conductors are manufactured according to IEC 62004 and IEC 61232 and generally according to IEC 61089, other standards could be offered.

Super Thermal Resistant Aluminum Alloy Conductor AluminumClad Invar Reinforced (STACIR/AW)

› DescriptionSuper Thermal Resistant Aluminum Alloy Conductor Aluminum-Clad Invar Reinforced (STACIR/AW) consists of one or more layers of super thermal resistant aluminium zirconium alloy (AT3) wires stranded over a central core of stranded aluminum-clad invar wires.Invar: Special Fe/Ni alloy with very low coefficient of linear expansion.STACIR/AW conductors are manufactured according to IEC 62004 and generally according to IEC 61089 and IEC 61232, other standards could be offered.


Wire

s and

Cab

les C

atel

ogue

HTLS ConductorsHTLS Conductors

WIR

E A

ND

CA

BLE

WIR

E A

ND

CA

BLE

Special Cables

Un-Armored Instrumentation CablesArmored Instrumentation CablesControl CablesAutomotive CablesTelephone CablesLAN CablesCoxial CablesFire Resistant & Fire Alarm

WIR

E A

ND

CA

BLE


Wire

s and

Cab

les C

atel

ogue

Special CablesW

IRES

AN

D C

ABL

ES

Special CablesW

IRE

AN

D C

ABL

E

Un-Armored

Suitable for use in indoor installations, on racks, in conduits, in dry and wet locations.

� 300V Collective Screen cables Multi-core cables Multi-pair cables Multi-triple cables


Armored

Suitable for use in indoor installations,outdoor installations, on racks, trays, in conduits,in dry and wet locations and for direct burials.

� 300V Collective Screen cables: Multi-core cables Multi-pair cables Multi-triple cables


› Automotive Wires

› Coaxial Cables

› LAN Cables

› Irrigation Cables

PRODUCT RANGE

Instrumentation Cables

Instrumentation cables are generally used as a low-power signal carrier for instrumentation equipment.

› Instrumentation Cables

› Control Cables

› Fire Fighting Cables

› Railway Cables

› Telephone Cables


Wire

s and

Cab

les C

atel

ogue

Special Cables

WIR

ES A

ND

CA

BLES

Special Cables

WIR

E A

ND

CA

BLE

� PVC insulated and PVC sheathed � PVC insulated , Copper tape screened and PVC sheathed � PVC insulated , Steel Wire armored and PVC sheathed � XLPE insulated and PVC sheathed � XLPE insulated, copper tape screened and PVC sheathed � XLPE insulated, steel wire armored and PVC sheathed

Control Cables

Control cables are used for connecting signaling and control unitsin plants & machinery, in railways, in traffic signals, in thermo power and hydropower stations.

Fire Fighting Cables

Fire Resistant

Fire resistant cables are used when the cables are required to keep circuit integrity and continue to operate in the presence of a fire for a specified time under defined conditions.

� Un-armored Multi Core� Armored Multi Core� Un-armored Multi Pair� Armored Multi Pair� Un-armored Multi Triple� Armored Multi Triple

Fire Retardant

Flame retardant cables are designed to resist the spread of fire into new areas.

Fire Alarm

Fire Alarm cables are used to transmit signals to the notification (Indicating) device Circuits such as alarm sounders, horns, strobes and other remote signaling equipment.

� Stranded Multi Core Un screened� Stranded Multi Core screened� Solid Multi Core� Flexible Multi Core


Wire

s and

Cab

les C

atel

ogue

Special CablesW

IRES

AN

D C

ABL

ES

Special CablesW

IRE

AN

D C

ABL

E

Railway Cables

There are variety of cables for all types of railways from subways to high-speed trains. Whatever the application, be it for power transmission, control, instrumentation, communications, signaling or even for use within station buildings, we can source special cables designed for the tough environments and conditions.

A full and detailed cable data sheet can be sent with each enquiry.

Telephone Cables

Telephone cables are used for interconnecting communication equipment and low signalling appliances.

Automotive Cables

Automotive Wires are used for low-tension electrical wiring in cars, motorcycles and other motor vehicles in applications including starting, charging, lighting, signalling and in instrument panel circuits.

Coaxial Cables Coaxial cables are used for interconnecting data or telecom equipment for the purpose of transmission of radio frequency signals, including television aerial connection, transmission of CCTV images, and broadband signals.

� C 80 � CF 160 � RG 6 � RG6 Armored � RG 8 � RG 11 � RG 59 (Solid PE) � RG 59 (Foamed PE)� RG 58 � RG 213 � 75 Ω Coaxial Interconnection Cable 0.315 / 1.95 � Coaxial Interconnection Cable 0.315 / 1.95 (8 Way 75 Ω ) � Coaxial Interconnection Cable 0.315/1.95 (16 Way 75 Ω) � Coaxial Interconnection Cable 0.405 / 1.95 ( 75 Ω ) � Coaxial Interconnection Cable 0.405 / 1.95 ( 8 Way 75 Ω ) � Coaxial Interconnection Cable 0.405 / 1.95 (16 Way 75 Ω)

*Note: We are not limited to the mentioned types only, and we can produce other types upon request

LAN CablesLAN (Ethernet) cables are network cables used with wired networks. They connect devices such as PCs, routers, and switches within a local area network.

� Cat 5e (UTP) � Cat 5e (FTP) � Cat 6 (UTP) � Cat 6A � Cat 7

Irrigation Cables Irrigation cables are used for electrically controlled irrigation/sprinkler systems. They are suitable for direct burial and may be used at operating temperatures not exceeding 70°C.


Wire

s and

Cab

les C

atel

ogue

Special Cables

WIR

ES A

ND

CA

BLES

Special Cables

WIR

E A

ND

CA

BLE

WIR

E A

ND

CA

BLE


Wire

s and

Cab

les C

atel

ogue

WIR

ES A

ND

CA

BLES

Factory Brief

Factory Brief

EL Sewedy Cables fiber optics factory is located in 10th of Ramadan on 4000 m² industrial city with the capacity of manufacturing 480,000 km of optical fibers with Rosendahl machinery branded. We have a varying capability from 1 up to 288 fibers/cable with state-of the art measuring instruments for all tests applied in our technical in-house Lab in order to provide high quality and reliable product/system.We provide customers with operating systems and business processes they can rely on and build, deliver and guarantee the fastest speed of signal transmission solutions that provide the advanced performance with high reliability.

Comcore Fiber Optic Cables

Through our brand we aim to provide high quality integrated Networking and Communication products using the latest high-tech methodologies to meet our various customers' demands.

Our cables are ready to perfectly performing in many applications of telecom, transportation, automotive, governmental, security, and utilities networks. For example, metropolitan, Fttx, LANs, border security, and metros are the most popular ones. We serve these domains by offering high quality product with dominant know-how, technology and solutions to enable them easily tackling of everyday challenges and improvements.

Factory Product range

• Duct “Non Metallic”• Duct- Direct Buried (Metallic) Rodent Protected Cable• Direct Buried(Non Metallic)• Direct Buried (Metallic) Rodent Protected Cable• Direct Buried(Metallic)(MF&RP) Cable• ADSS (All Dielectric Self Support) Loose Tube Design• Aerial “Figure 8”• Mini Duct• Light Pack• Triple Sheath Direct Burial Rodent protected • Micro Cables

SubmarineNetworks

Long-haulNetworks

FTTH & AccessNetworks

Enterprise & PrivateNetworks

Consumer Electronics

Vascade*Fibers

SMF-28* ULL Fiber

LeafFiber

SMF-28e+* LL Fiber

SMF-28e+* LL Fiber

SMF-28* Ultra Fiber

SMF-28e+* Fiber

Clear Curve *Single

Mode Fiber

Clear Curve MultiMode

Fiber

Clear Curve* VSDN Fiber

WIR

E A

ND

CA

BLE


WIR

ES A

ND

CA

BLES

From Our Cable Designs

PRODUCT RANGE

Stranded-Cable Design (STSC) (MINI-TUBE)

PolyamideSheath (PA)

72 Fibers (6 x 12) G.652.D

Water blockingTape Rip-Cord

Water blockingYarn

Identification-TapeDielectric Strength Member

Sheath (PE)

Mini –Tube

Tube gel filled

Corrugated SteelTape

Loose Tube (72 Fibers) Loose Tube – Non Metallic (432 Fibers)

Special Designs

Central BufferTube 5.0 mm

Duct or direct buried cable moisture barrier rodent protected

Triple (PE) Sheath, Double Armoring, Polyamide Sheath

WIR

E A

ND

CA

BLE PRODUCT RANGE

Light Pack Design (MAXI-TUBE)

8 Single mode fibersTube gel filled

Steel wire

Steel wire

Central BufferTube 4.2mm

Rip Cord

Outer PE-Sheath

Water blocking Tape

Corrugated steel tape

Rip Cord

8 Single mode Fibers

48 Fibers (4x12) G.652.B

Bandle-Binder

Tube gel filled

Steel wire

Rip Cord

Corrugated steel tape

Water blocking-Tape

PE-Sheath

Rip Cord

Steel wire

Central BufferTube 4.2mm

48 Fibers

ADSS Cable Design

ADSS (144 Fibers)


Wire

s and

Cab

les C

atel

ogue

WIR

ES A

ND

CA

BLES


WIR

E A

ND

CA

BLEPRODUCT RANGE

PILOT CABLE (15kV Induced Voltage)

Composite Optical Fiber Cable + 19-Pair Multi-pair Cable

Fiber Optic Cables Main References


WIR

ES A

ND

CA

BLES


WIR

E A

ND

CA

BLE


Wire

s and

Cab

les C

atel

ogue

WIR

ES A

ND

CA

BLES

Testing Capability

Testing Capability

Our finished quality product is subjected to mechanical, environmental and optical testing and also our raw materials which are supplied from well-known suppliers worldwide are tested for acceptance to ensure compliance to international certified standards.

Management System Certificates

• BASEC Quality Management System ISO 9001:2008 (For Quality Management System) • BASEC Quality Management System ISO / TS 16949 :2002 • ISO 17025 (Competence of Testing & Calibration Laboratories) • Environmental Management System (ISO 14001:2004) • Occupational Health and Safety Assessment Series (OHSAS 18001:2007)

Fiber Optic Cables Manufacturing Standards

El Sewedy Cables – Egypt, one of El Sewedy Electric companies confirms that our products; Fiber optic cables are manufactured and tested in line with the standards listed below:

• ITU-T G.652.D• ITU G.655• IEC-60757• IEC-60793• IEC-60794• TIA/EIA-455

Standard Raw Materials Used in Fiber Optic Cables

• Fibers – Fujikura (Japan) / Sumitomo (Japan) / Corning (UK/USA) / Draka (UK)• FRP – Fiberline (Netherland) / Polystal (Germany) • LLDPE/MDPE/HDPE – Borealis (Belgium) / DOW (USA)• LSZH – Finplast (Italy)• PBT – BASF (Germany) / Bayer (Germany) / SABIC (KSA)• PC – Bayer (Germany / SABIC (KSA)• Tube Filling Jelly – MWO (Germany) / Unigel (UK) / ITCO gel (India)• Aramid / Glass Yarn – Roblon (Denmark) / DS Cables (Korea)

WIR

E A

ND

CA

BLE


WIR

ES A

ND

CA

BLES

Certificates

Power Cables Certificates

Special Cables Certificates

WIR

E A

ND

CA

BLE


Wire

s and

Cab

les C

atel

ogue

WIR

ES A

ND

CA

BLES

Certificates

Fiber Optic Cables Certificates

WIR

E A

ND

CA

BLE


WIR

ES A

ND

CA

BLES

Facts and Figures

Production Facillity Headcount/Manpower

Type of wires/cables produced Production Capacity System Certificates

Egytech A1 660 LV, MV Cables2000 ton L.V1000 ton M.V

ISO 9001:2015ISO 14001:2015OHSAS 18001

Elsewedy Cables 820 HV Cables 1500 ton H.V

Egytech A3 310 LV, MV Cables3500 ton L.V

1000 ton M.V

Elsewedy Wires 320 PC , GWS Wires , OHTL1500 Ton PC, 2500 ton GSW

1000 ton OHTLHV Cables

Elsewedy Algeria 570

VHV, HV ,MV, LV,OPGW, COAXIAL & SOLAR

Special fire-resistant and halogen-free cables - overhead

transmission lineABC twisted cables

30,000 tons /year

company quality management system ISO 9001

Product certification :KEMA (Hollande) -

KINECTRICS(Canada), plus CREDEG

(Groupe SONELGAZ).

Elsewedy Ethiopia 160

LV Cables, building wires, Aluminum overhead

conductors and Air bundled Aluminum Cables

2000 ton in 2015Total in the last 10 years

13,860 TON HV Cables

WIR

E A

ND

CA

BLE


Wire

s and

Cab

les C

atel

ogue

WIR

ES A

ND

CA

BLES

Sustainability

As a major electricity and construction contractor we have a duty to make our products and services as energy efficient as possible and to reduce emissions and waste. Over and above that, we believe that meeting our customers’ energy needs should go hand in hand with meeting the needs of our communities and our planet.

• Legislation Association Hospital, Egypt• Elsewedy Electric Foundation• Nursing Schools• Art & Culture• Social Contributors• Humantarian Fund• Elsewedy Friends Club• Other Charitable Work

Our promise to future generations

We will strive to find ways of delivering clean energy, minimize the environmental impacts of our operations and share the benefits of success by investing in education and well-being for all.

WIR

E A

ND

CA

BLE


Wire

s and

Cab

les C

atel

ogue

WIR

E A

ND

CA

BLE

Contacts

HEAD OFFICEPlot No. 27, 1st District, 5th Settlement,P.O.Box 311, New Cairo 11853, EgyptTel.: (+202) 275 99 700 - 709Fax: (+202) 275 99 731Email: [email protected] in Head Office

CABLES & ACCESSORIES

Egytech Cables & Elsewedy Cables EgyptTel.: (+202) 275 99 732 / 4Fax: (+202) 275 99 735Email: [email protected]: [email protected]

United IndustriesTel.: (+202) 275 99 740 / 1 / 2Fax: (+202) 275 99 743 / 15 / 69Email: [email protected]

EgyplastArea #A6; Plot 36,37. 3rd industrial zone,Elrobeky Region, 10th of Ramadan City,El Sharkia, EgyptTel.: (+2015) 411 631Fax: (+2015) 411 629Email: [email protected]

UEIC ElsewedyP.O. Box 27350 Riyadh 11417Tel.: (+966) 18124604 - Fax: (+966)18129251Email: [email protected] Wires10th of Ramdan City, Zone A3, El Sharkia,EgyptTel.: (+2015) 411944Fax: (+2015) 411941Email: Email: [email protected]

United MetalFax: (+202) 275 99 744 / 45Email: [email protected]

Elsewedy SedcoTel.: (+2015) 411141Tel.(Office): (+202) 275 99 750 / 1Email: [email protected]

Elastimold - EgyptTel.: (+2015) 411141Tel.(Office): (+202) 275 99 750 / 1Email: [email protected]

Giad ElsewedyGiad Industries City, Khartoum, SudanP.O. Box 11714Tel.: (+249) 163 202771Fax: (+249) 183 70106Email: [email protected]

Elsewedy Cables KSANassar Center, King Fahd Road Al Azizah,P.O.BOX 16582, Jeddah – 21474,Saudi ArabiaTel.: (+966) 266 87 488 - (+966) 266 87 499Fax: (+966) 266 87 480Email: [email protected]

Elsewedy Cables Algeria153 rue Ali Khodja, El Biar, Alger, AlgerieTel.: (+213) 21924005/07Fax: (+213) 21 923994Email: [email protected]

Elsewedy Cables EthiopiaPO BOX 3238 Code 1250, Edna Mall Building,5th Floor Addis Ababa, EthiopiaTel.: (+251) 116 61 6161Fax: (+251) 116 61 6164Email: [email protected]

Doha Cables3rd floor, KIA Motors Showroom bldg.,Al Rayyan road ,Al Sadd, P.O. Box 2248,Doha, QatarTel.: (+974) 4033 95 02 / 503Fax: (+974) 4455 30 49Email: [email protected]

ELECTRICAL PRODUCTS

Elsewedy Sedco for petroleum servicesTel.: (+202) 275 99 750 / 1Fax: (+202) 275 99 752Email: [email protected]

Egyptian Company for ManufacturingElectrical Insulators ECMEIIndustrial Zone A3, 10th of Ramadan City, EgyptTel.: (+2015) 412 560Fax: (+2015) 411 255Email: [email protected]: [email protected]

Elsewedy Electric Ghana9, Light Industrial Area No. A/36/2B Tema –Ghana. P.O. Box PMB 187 TEMA - GhanaTel.: (+233) 111 01 - 111 02Fax: (+233) 11103Email: [email protected]

ENERGY MEASUREMENT & MANAGEMENT

ISKRAEMECOIskraemeco Savska Ioka 4 SI-4000 Kranj,SloveniaFax: (+386) 420 64 443Email: [email protected]

ISKRAEMECO – EgyptFax: (+202) 275 99 747 / 8Email: [email protected]

TRANSFORMERS

Elsewedy TransformersTel.: (+202) 275 99 727E-mail: [email protected]

Elsewedy Electric ZambiaChilanga road off Kabwe road, Plot F/416A/D2 - P.O. Box70058 Ndola, Zambia.Tel.: +260 (212) 650120/1Email: [email protected]

Elsewedy Electric NigeriaToga-Zanumu Industrial Area, Limca Bus Stop,Badagry Expressway, Lagos – NigeriaMob.: (+234) 809 900 0070Email: [email protected]

SUDATRAF Sudanese Egypt Electrical IndustriesPiece # 55/8 Square 7 Ind. Zone –Khartoum Bahary - SudanTel.: (+249) 185 31 34 18Fax: (+249) 185 31 33 94Email: [email protected]

COMMUNICATIONS

United IndustriesFax: (+202) 275 99 743 / 69 / 15Email: [email protected]

3W Networks - UAEJebel Ali Free Zone – DubaiTel.: (+971) 488 33 616Fax: (+971) 488 34 878Email: [email protected]

PROJECTS & DEVELOPMENTS

Elsewedy Electric Transmission & DistributionFax: (+2015) 411 629Email: [email protected]

Elsewedy PowerFax: (+2015) 411 629Email: [email protected]

Power System Projects (PSP)Plot 246 -2nd sector of City Center5th Settlement, New Cairo, EgyptTel.: (+202) 251 726 37 / 50 / 51Fax: (+202) 251 726 36Email: [email protected]

Elsewedy Cables-Qatar3rd floor, KIA Motors Showroom bldg.,Al Rayyan road, Al Sadd, P.O. Box 22487,Doha, QatarTel.: (+974) 40339500 / 501Fax: (+974) 44653892Email: [email protected]

WIND ENERGY GENERATION

SET (SIAG Elsewedy Towers)Ain sokhna, South of the Economic zone,North West Gulf of Suez, EgyptP.O. Box 117-ET-43111 SuezTel.: (+2062) 920 4250Fax: (+2062) 920 4255Email: [email protected]

SOLAR ENERGY SOLUTIONS

Elsewedy PowerEmail: [email protected]

INTERNATIONAL OPERATION

Elsewedy Cables – KuwaitKuwiat City, Al Hamad Tower A, Block 14,Phase (1B), 4th Floor, P.O.Box 4588Tel.: (+965) 999788878Fax: (+965) 22974404Email: [email protected]

Elsewedy Cables – UAEArenco Tower-Sheikh Zayed road12th Floor, Office No. 1207P.O.Box 90395, Dubai, UAETel.: (+971) 44542500Fax: (+971) 44 542501Email: [email protected]

Power Cables Division - Elsewedy Electric

Documents

Transcript of Power Cables Division - Elsewedy Electric