PART B Renovation & Upgradation Work At SAPTI Campus ...
-
Upload
khangminh22 -
Category
Documents
-
view
1 -
download
0
Transcript of PART B Renovation & Upgradation Work At SAPTI Campus ...
Name of work :- PART B Renovation & Upgradation Work At SAPTI Campus DhrangadhraEstimate For PART B (Kitchen Dining,Class Room & Studio, Admin Block, Workshop 1&2 Display & Shop)
SR.
NODESCRIPTION Quantity UNIT RATE AMOUNT
1 Demolition of Brick work and stone masonry including stacking of
serviceable materilas and disposal of unservice able materials with all
lead and lift.,Labour tools, Mechanical
Tools,Scaffolding,Staging,Required rope etc.& Discarding it from the
site incl. carrying trip as per as directed by site in charge. (ii) In
Cement Mortar.
82.00 Cu.Mt. 337
2 Dismentaling tiled of stone floors laid in mortar including stacking of
serviceable Materials are stored at Located store area and disposal of
unserviceable materials with all lead and lift.,Labour tools,
Mechanical Tools,Scaffolding,Staging,Required rope etc.& Discarding
it from the site incl. carrying trip as per as directed by site in charge.
925.00 Sq.Mt. 29.4
3 Dismentling doors, windows, ventilators etc. (wood or steel) shutters
including chowkhats architraves, holdfasts and other attachment etc.
complete and stacking them within all lead and lift.,Labour tools,
Mechanical Tools,Scaffolding,Staging,Required rope etc. &
serviceable Materials are stored at Located store area and disposal of
unserviceable materials Discarding it from the site incl. carrying trip
as per as directed by site in charge. (i) Not exceeding 3 Sq.M. in area.
36.00 Nos 115
4 Dismentling doors, windows, ventilators etc. (wood or steel) shutters
including chowkhats architraves, holdfasts and other attachment etc.
complete and stacking them within all lead and lift.,Labour tools,
Mechanical Tools,Scaffolding,Staging,Required rope etc. &
serviceable Materials are stored at Located store area and disposal of
unserviceable materials Discarding it from the site incl. carrying trip
as per as directed by site in charge. (ii) exceeding 3 Sq.M. in area.
9.00 Nos 154
5 Dismentaling & Demolition including stacking of serviceable
materilas and disposal of unserviceable materials with all lead and
lift.Labour ,tools,Breaker, Drill machine, Cutter & Scaffolding etc &
Discarding it from the site incl. carrying trip as per as directed by site
in charge. (i) R.C.C. work
2.00 Cu.Mt. 648
6 Removing and scraping of old deteriorated plaster of any thickness
from wall / R.C.C member including stacking of serviceable material
and disposal of unserviceable from site of work with all lead and
lift.Labour tools, Scaffolding& Discarding it from the site incl. carrying
trip as per as directed by site in charge.
160.00 Cu.Mt. 11.9
7 Providing and laying cement concrete 1:2:4 (1-Cement : 2- coarse
sand : 4- 12 to 20mm size black trap metal of approved quality as an
aggregate incl. incl. lead & lift,Labour, Tools,watering, curing, ,
centering /formwork incl. using machine mixed design cement
concrete & compacted with vibrators incl. finishing the surface etc. as
directed as per detailed drawing & design & as instructed by the
engineer incharge etc.complete [Excl.TMT Reinforcement] (A)
Foundation and Plinth.
5.00 Cu.Mt 2758.00
8 Providing & Laying cement concrete M-250 for R.C.C. Beams using 10
to 20 mm size black trap metal of approved quality as an aggregate
incl. watering, curing, scaffolding, centering incl. using machine
mixed design cement concrete & compacted with vibrators incl.
finishing the surface etc. as directed as per detailed drawing & design
& as instructed by the engineer incharge etc.complete [Excl.M.S.
Reinforcement]( Rate are inclusive of providing and mixing plastisizer
of approved make in propertion as prescribed by manufacture) FIRST
FLOOR
21.00 Cu.Mt. 6765.00
Page 1 of 15
Name of work :- PART B Renovation & Upgradation Work At SAPTI Campus DhrangadhraEstimate For PART B (Kitchen Dining,Class Room & Studio, Admin Block, Workshop 1&2 Display & Shop)
SR.
NODESCRIPTION Quantity UNIT RATE AMOUNT
9 Providing & Laying cement controled concrete M-250 for R.C.C. slab
using 10to 20 mm size black trap metal of approved quality as an
aggregate incl.all lead & lift ,Labour, tools, watering, curing,
scaffolding, centering, formwork, incl. using machine mixed design
controlled cement concrete & compacted with vibrators incl.
finishing the surface etc. as directed as per detailed drawing & design
& as instructed by the engineer incharge etc.complete [Excl TMT
Reinforcement] ( Rate are inclusive of providing and mixing plastisizer
of approved make in propertion as prescribed by manufacture) all
releated structure of GROUND FLOOR SLAB
33.00 Cu.Mt. 4597.00
10 Providing & Laying controlled cement M-250 for R.C.C. slab using 10
to 20 mm size black trap metal of approved quality as an aggregate
incl.all lead & lift ,Labour, tools, watering, curing, scaffolding,
centering, formwork, incl. using machine mixed design controlled
cement concrete & compacted with vibrators incl. finishing the
surface etc. as directed as per detailed drawing & design & as
instructed by the engineer incharge etc.complete [Excl TMT
Reinforcement] ( Rate are inclusive of providing and mixing plastisizer
of approved make in propertion as prescribed by manufacture) all
releated structure of FIRST FLOOR SLAB
43.00 Cu.Mt 4626.00
11 Providing & Laying controlled cement M-250 for R.C.C. Staircase
using 10 to 20 mm size black trap metal of approved quality as an
aggregate incl.all lead & lift ,Labour, tools, watering, curing,
scaffolding, centering, formwork, incl. using machine mixed design
controlled cement concrete & compacted with vibrators incl.
finishing the surface etc. as directed as per detailed drawing & design
& as instructed by the engineer incharge etc.complete [Excl TMT
Reinforcement] ( Rate are inclusive of providing and mixing plastisizer
of approved make in propertion as prescribed by manufacture) all
releated structure of GROUND FLOOR
3.50 Cu.Mt 4554.00
12 Providing & Laying controlled cement M-250 for R.C.C. Lintel work
using 10 to 20 mm size black trap metal of approved quality as an
aggregate incl.all lead & lift ,Labour, tools, watering, curing,
scaffolding, centering, formwork, incl. using machine mixed design
controlled cement concrete & compacted with vibrators incl.
finishing the surface etc. as directed as per detailed drawing & design
& as instructed by the engineer incharge etc.complete [Excl TMT
Reinforcement] ( Rate are inclusive of providing and mixing plastisizer
of approved make in propertion as prescribed by manufacture) incl
Realeted structure of GROUND FLOOR
3.00 Cu.Mt 5123.00
13 Providing & Laying controlled cement M-250 for R.C.C. Lintel work
using 10 to 20 mm size black trap metal of approved quality as an
aggregate incl.all lead & lift ,Labour, tools, watering, curing,
scaffolding, centering, formwork, incl. using machine mixed design
controlled cement concrete & compacted with vibrators incl.
finishing the surface etc. as directed as per detailed drawing & design
& as instructed by the engineer incharge etc.complete [Excl TMT
Reinforcement] ( Rate are inclusive of providing and mixing plastisizer
of approved make in propertion as prescribed by manufacture) incl
Realeted structure of FIRST FLOOR
10.00 Cu.Mt 5152.00
14 Providing & Laying controlled cement M-250 for R.C.C. Chhajjah work
using 10 to 20 mm size black trap metal of approved quality as an
aggregate incl.all lead & lift ,Labour,tools, watering, curing,
scaffolding, centering, formwork, incl. using machine mixed design
controlled cement concrete & compacted with vibrators incl.
finishing the surface etc. as directed as per detailed drawing & design
& as instructed by the engineer incharge etc.complete [Excl TMT
Reinforcement] ( Rate are inclusive of providing and mixing plastisizer
of approved make in propertion as prescribed by manufacture) incl
Realeted structure of FIRST FLOOR
1.50 Cu.Mt 3458.00
Page 2 of 15
Name of work :- PART B Renovation & Upgradation Work At SAPTI Campus DhrangadhraEstimate For PART B (Kitchen Dining,Class Room & Studio, Admin Block, Workshop 1&2 Display & Shop)
SR.
NODESCRIPTION Quantity UNIT RATE AMOUNT
15 Providing & laying TMT Bar FE 500/500D reinforcement for R.C.C.
work Including cleaning, cutting, bend- ing,binding, laying , lapping,&
fixing in position for any kind of R.C.C.structure at any height
including Labour, Tools, transporting, unloading in the site
etc.including maintaining a steel consumtion register with detail
cutting shedule & the 16 gauge binding wire, spacer blocks of CM 1:2
with embedded binding wire of suitable length protective coat of
neat cement slurry to be applied as per directed.complete as per
directed by engg- in- charge 6mm Bar For Partition wall to be Add in
this item.Up to plinth+Ground Floor
3720.00 Kg 45.00
16 Providing & laying TMT Bar FE 500/500D reinforcement for R.C.C.
work Including cleaning, cutting, bend- ing,binding, laying , lapping,&
fixing in position for any kind of R.C.C.structure at any height
including Labour, Tools, transporting, unloading in the site
etc.including maintaining a steel consumtion register with detail
cutting shedule & the 16 gauge binding wire, spacer blocks of CM 1:2
with embedded binding wire of suitable length protective coat of
neat cement slurry to be applied as per directed.complete as per
directed by engg- in- charge 6mm Bar For Partition wall to be Add in
this item FIRST FLOOR (Related Structure)
12568.00 Kg 45.70
17 Providing & fixing of reinforcement bars ( reiforcement bars shall be
paid extra under relevant item of work ) after drilling the hole of
required diameter & depth ,cleanning of the same ,providing /filling
the hole with Injection Mortar (HIT HY 150 of Hilti or approved
equivalant ),inserting reinforcement bar etc. complete as per
Manufacturers & architects instruction.The work shall be carried out
by the technical workmens/agency approved by the manufacturer
and under technical supervision of Manufacturer of Injection grout
including all materials,tool tackles ,labour etc.complete. (A) 8mm.
dia.bar -Holes 14mm dia Depth 100mm
55.00 Each 90
18 (B) 10 mm. dia.bar -Holes 14mm dia Depth 100mm 100.00 Each 120
19 (C) 12 mm. dia.bar -Holes 16mm dia Depth 120mm 120.00 Each 140
20 Providing and fixing M.S. grills of required pattern to wooden frames
of windows etc. including Straightening, Cleaning, Derusting,
Cutting,bending, Fabricating, Welding, Bolting, Hoisting & Fixing in
position MS steel work,required spacings and frame alround for
window grills at any location and height, made up of any sections Flat
bar,angles, channels, square or flats, bar sections, solid bars
including labour, tools, transporting unloading Scaffolding, staging
etc.& fixing in conc. or brick work & including one coat of Red Lid
Primer with 2 coats of Enamel paint of approved make etc.complete
as per Drawing & directed by Engg in Charge Plain Grill
150 Kg. 63.60
21 Providing and constructing of 230mm thk. or above thickness Brick
masonry work using 1st class common burnt clay building bricks
having crushing strength not less than 35 kg./Sq.Cm. in in cement
mortar 1:6 (1 unit Cement, 6 unit screened sand) using Screened
coarse Sand good quality approved make bricks layerat all levels and
heights, parapet walls, entrance steps, or as directed by architect
including hacking of masonry joints from both the faces, staging,
scaffolding, curing, stalking, transport etc. complete. (bricks to be
soaked in water for at least 20 mins. prior to construction work
).complete as per specification or as directed by Engineer-in-
Charge/Designer.(B) Conventional GROUND FLOOR & releated
Structure
37.00 Cu.Mt 3050.00
Page 3 of 15
Name of work :- PART B Renovation & Upgradation Work At SAPTI Campus DhrangadhraEstimate For PART B (Kitchen Dining,Class Room & Studio, Admin Block, Workshop 1&2 Display & Shop)
SR.
NODESCRIPTION Quantity UNIT RATE AMOUNT
22 Providing and constructing of 230mm thk. or above thickness Brick
masonry work using 1st class common burnt clay building bricks
having crushing strength not less than 35 kg./Sq.Cm. in in cement
mortar 1:6 (1 unit Cement, 6 unit screened sand) using Screened
coarse Sand good quality approved make bricks layerat all levels and
heights, parapet walls, entrance steps, or as directed by architect
including hacking of masonry joints from both the faces, staging,
scaffolding, curing, stalking, transport etc. complete. (bricks to be
soaked in water for at least 20 mins. prior to construction work
).complete as per specification or as directed by Engineer-in-
Charge/Designer.(B) Conventional FIRST FLOOR & releated Structure
94.00 Cu.Mt 3081.10
23 Providing & constructing 115mm thick brick wall using in common
brunt clay building bricks having crushing strength not less than 35
Kg/Sq in CM 1:4 (1 unit Cement, 4 unit screened sand) using Screened
coarse Sand good quality approved make bricks layer at all levels and
heights, with necessary scaffolding, Stagging, watering, curing,
hacking of masonry joints from both the faces, including stalking,
transport loading unloading all lead & lift etc. complete. (bricks to be
soaked in water for at least 20 mins. prior to construction work
).complete as per specification or as directed by Engineer-in-
Charge/Designer, also including providing concrete band with 2 nos
6mm dia steel bar at every 4th layer of masonary up to slab level as
per directed steel qty measured & pay separately in steel item for
this item GROUND FLOOR.
111.00 Sq.Mt. 398.00
24 Providing & Applying external 20mm thick sand faced cement plaster
on walls upto Any Height above ground level consisting of 12mm
thick backing coat of C.M. 1:3 (1-cement : 3- sand) and 8mm thick
finishing coat of C.M. 1:1 (1-cement : 1-sand) in to Line Level
etc..including all Scaffolding,staging, curing, preparation and dressing
of surfaces etc. Making With Gutka (only Elevational Plan area
considered for Measurement) completeas per directed by Engg. In
charge. (ANY HEIGHT)
440.00 Sq.Mt. 205.00
25 Providing & applying 10 mm thick mala cement plaster in single coat
on fair side of Ceiling surface / Sloping Roof etc. for interior
plastering and finished even and smooth in C.M. 1:3 (1 cement : 3
Sand ) ncluding all Scaffolding,staging, curing, preparation and
dressing of surfaces etc. in true line and level etc. complete as
directed by Engineer in Charge FIRST FLOOR
304.00 Sq.Mt. 102.80
26 Providing & applying 20 mm thick double coat mala cement plaster
on interior brick / concrete work for plastering comprising of base
coat of 12 mm thick cement plaster in cement mortar (1 Cement : 4
coarse sand) in rough finishing and 8 mm thick top coat of cement
mortar 1:2 (1 Cement : 2 Coarse sand) finished with trovel Including
all Scaffolding,staging, curing, preparation and dressing of surfaces
etc. in true line and level etc. complete as directed by Engineer in
Charge.GROUNDFLOOR
784.00 Sq.Mt. 170.00
27 Providing & applying 20 mm thick double coat mala cement plaster
on interior brick / concrete work for plastering comprising of base
coat of 12 mm thick cement plaster in cement mortar (1 Cement : 4
coarse sand) in rough finishing and 8 mm thick top coat of cement
mortar 1:2 (1 Cement : 2 Coarse sand) finished with trovel Including
all Scaffolding,staging, curing, preparation and dressing of surfaces
etc. in true line and level etc. complete as directed by Engineer in
Charge.FIRST FLOOR
497.00 Sq.Mt. 183.10
28 Providing & Applying 15mm thick cement plaster in single coat on
Rough (Similar)side of single or half brick walls for interior plastering
upto floor two level and finished even and smooth in (ii) Cement
mortar 1:4 (1-cement :4-sand) Including all Scaffolding,staging,
curing, preparation and dressing of surfaces etc. in true line and level
etc. complete as directed by Engineer in Charge.GROUND LOOR
220.00 Sq.Mt. 103.00
Page 4 of 15
Name of work :- PART B Renovation & Upgradation Work At SAPTI Campus DhrangadhraEstimate For PART B (Kitchen Dining,Class Room & Studio, Admin Block, Workshop 1&2 Display & Shop)
SR.
NODESCRIPTION Quantity UNIT RATE AMOUNT
29 Providing & Applying 10mm thick cement plaster in single coat on
brick/concrete walls for interior plastering upto floor two level and
finished even and smooth in Cement mortar 1:4 (1-cement :4-sand)
Including all Scaffolding,staging, curing, preparation and dressing of
surfaces etc. in true line and level etc. complete as directed by
Engineer in Charge.FIRST FLOOR
18.00 Sq.Mt. 91.70
30 Providing throating or plaster drip and moulding to Apx 25mm x
10mm deep R.C.C. chhajja.
110.00 R.Mt 24.60
31 Providing & making 20 mm deep finished groove in plaster in line
and level etc. Comp. For all Floor
100.00 R.Mt 25.00
32 Providing & making Plaster Patta in line and level etc. Comp. For all
Floor
82.00 R.Mt 25.00
33 Providing and laying water proofing treatment by (a). Applying neat
cement slurry 2.75 kg/m2 of cement admixed with water proofing
compound after cleaning the surface. (b). Layingof bricks bats of
25to75 mm size in CM 1:5 (1 cement : 5 course sand) admixed with
water proofing compound over 20mm thick layer of cement mortar
1:5 to required slop including rounding of juctions of walls and slab
with spacing not more than 30mm.(c)After two days of proper curing
applying a second coat of cement slurry and cured for another two
days. (d) Finishing the surface with 20mm thick cm 1:4 and cured for
two days (e) Provinding and laying chaina mosaic flooring using
broken pieces of glazed tiles (in one colour or more as per pattern) to
be laid over cement sand mortar screed (1:2) and cement grouting
with water proofing compound in required levels and slope and to be
temped by wooden mallet and filling the joints with white cement
with coloured pigments as required including rounding of juctions at
walls,curing etc.As directed and specified.Water pond should be
carried out for a period of three days as directed by EIC.
580.00 Sq.Mt. 837.00
34 Providing cement vata (10cm. x 10 cm. size) quarter round in cement
mortar 1:1 including neat cement finishing, watering etc. complete.
200.00 R.Mt 18.40
35 Providing and laying Granite slab (18mm thick) in Tread & Riser dado
and pillares laid on 12 mm thick cement mortar 1:3 (1cement : 3
coarse sand) and jointed with grey cement slurry including finishing
with flush pointing, rounding the outer edge, moulding,polishing & all
lead & lift , Labour, Tools etc & in Tread Making Groove as per Detail
drawing completeas per directed by Engg. In charge. (All Floor)
30.00 Sq.Mt. 2361.00
36 Providing and Fixing Granite Telephonic Black Colour 15 to 18 mm
thick for jambs and sills of doors & windows using neat cement slurry
laid over 20 mm average base of cement mortar 1:1(1 cement:1
Coarse Sand) and jointed with grey cement slurry including
racking(Tancha Work) rubbing and polishing,scaffoldings,tools and
tackles,scaffolding etc. complete(with base of neat cement) as per
direction of Engineer in charge including full rounding the exposed
edges as directed.
41.00 Sq.Mt. 2352
37 Constructing of cooking platform ( sandwich type ) 60cm width and
80cm high resting on thick sandwiched polish Granite Slab in C.M 1:3
with providing and fixing 25 mm thick rough kota stone at bottom
and 20 to 25 mm thick Polish Granite stone ( single piece/ telephonic
Black ) top and polished granite stone (single piece/ telephonic Black
) 20 to 25mm thick on top with 15mm high machine cut polished
granite round moulded facia patty including polishing etc . complete
as per drawing and specification without stainless steel sink including
necessary cutting for sink & making hole for gas pipe and fixing P.V.C
bend of 25mm dia.Including all lead & lift, labour, tools etc.(ALL
FLOOR)
3.00 Sq.Mt. 2081
Page 5 of 15
Name of work :- PART B Renovation & Upgradation Work At SAPTI Campus DhrangadhraEstimate For PART B (Kitchen Dining,Class Room & Studio, Admin Block, Workshop 1&2 Display & Shop)
SR.
NODESCRIPTION Quantity UNIT RATE AMOUNT
38 Providing and laying polished Kota stone slab (Green Kota As per
approved Quality & shade by Architect) flooring over 20mm
(Average) thick base of cement mortar 1:6 (1-cement : 6- coarse
sand) laid over and jointed with grey cement slurry mixed with
pigment to match the shade of slab including rubbing and polishing
etc as per directed. complete. (A) 25mm thick (All Floor)
747.00 Sq.Mt. 611
39 Providing Mirror Polish on Existing Kotah stone Floor with joint
Cleaning, & furnish with Cement slurry & compleate Machine
MIRROR Polishing including finishing smooth & after polishing Floor
washing for use.including all Laour, tools etc. Complete as per
directed By Engg- in charge
1850.00 Sq.Mt. 250
40 Providing and laying Vitrified granite tiles 8mm to 10 mm thick tiles
Floor,skirting, risers of steps and dedo on 10mm thick cement plaster
1:3 (1-cement : 3-coarse sand) and jointed with white cement slurry
including finished with flush pointing & cleaning the surface with all
lead & lift etc. complete as per directed of any shade approved by
Higher Authority of approved brands etc. (Size 600x600/300x300 )
245.00 Sq.Mt. 779.00
41 Prov. & laying 24" x 24" Full Body Matt or Rustic Vitrified 10mm or
more thick tiles flooring laid on bed of 20mm (Average) base of
Cement Mortar 1:6 (1-Cement : 6 Coarse Sand) on new surface and
jointed with colour cement slurry including finished with flush
pointing & cleaning the surface all lead & lift etc. completed of any
shade approved by Higher Authority of approved brands like Somani ,
AGL Sun Heart,Marbito etc comp. as directed.Basic rate Rs 550 to
600 / Sq Mt) ALL FLOOR
293.00 Sq.Mt. 1081.00
42 Providing and laying 24" x 24" Full Body Vitrified tiles of Matt or
Rustic Finish 10mm or more thick tiles SKIRTING on 10mm thick
Cement Plaster 1:3(1-Cement :3 Coarse Sand) on new surface and
jointed with colour cement slurry including finished with flush
pointing & cleaning the surface all lead & lift etc.completed of any
shade approved by Higher Authority of approved brands like
Somani,AGL, Sun heart, Marbito etc. comp. as directed. ALL FLOOR
20.00 Sq.Mt. 997.00
43 Providing & Applying spacer ,of 5mm and not less then 3mm depth of
epoxy grooving of lavicrete , Roff equivalent
100.00 R.Mt 63.00
44 Removing dry or oil bound distemper by a washing and scraping and
sand papering the WALL SURFACES including all height with required
Scaffolding, stagging, labour, Tools etc including necessary repairs to
scratches with required Cement pest or as per directed
complete.smooth surface for Painting work as per Directed by engg
in charge.
4010.00 Sq.Mt. 6.9
45 Removing dry or oil bound distemper by a washing and scraping and
sand papering the CEILING SURFACES / SLOPPING ROOF including all
height with required Scaffolding, stagging, labour, Tools etc including
necessary repairs to scratches with required Cement pest or as per
directed complete.smooth surface for Painting work as per Directed
by engg in charge.
2301.00 Sq.Mt. 7.9
46 Wall painting (two coats) with plastic emulsion paint of approved
brand and manufacture on undecorated wall surface to give an even
shade including throughly brushing the surface free from mortar
droppings and other foreign matter and sand papered smooth.
including all lead & lift , labour, tools, scaffolding, stagging etc.All
Floor
3030.00 Sq.Mt. 49.60
47 Painting (two coats) with plastic emulsion paint of approved brand
and manufacture on CEILING to give an even shade including
throughly brushing the surface free from mortar droppings and other
foreign matter and sand papered smooth. including all lead & lift ,
labour, tools, scaffolding, stagging etc.All Floor
3000.00 Sq.Mt. 52.90
Page 6 of 15
Name of work :- PART B Renovation & Upgradation Work At SAPTI Campus DhrangadhraEstimate For PART B (Kitchen Dining,Class Room & Studio, Admin Block, Workshop 1&2 Display & Shop)
SR.
NODESCRIPTION Quantity UNIT RATE AMOUNT
48 Providing and applying two coats of acrylic exterior weather paint on
out side of wall surface of approved quality paint like "APEX"
ULTIMA/ Weather Shild/ Asian As per Approved brand make &
required shade after thoroughly brushing the surface free from
mortar & scrapping old white wash/snow sem or oil painted surface
inc. scaffolding, cleaning the wall & preparing the surface even &
smooth, filling the cracks incl. applying one coat of white priming
coat of reputed brand as suggested by Dy. Engg. etc. and shall be
guaranteed for minimum period of 7 years after handing over the
completed building by the main contractor to be finished as directed.
& 10% Amount Retail for This Item (All Floor)
3100.00 Sq.Mt. 72.00
49 Providing wood work in Frames of Doors, windows cleare story
windows and othersimilar works wrought, framede and fixed in
position with required hold fast of size 40 x6mm flat 300 mm
long as per drawing. Including one coat of wood primer & 2 coats of
Enamel Paint as per Direcet shade (asian, berger, indigo etc)&all lead
& lift, loading, un loading ,labour, tools, etc & Teakwood is well
seasonded,tested, Bitumen painted & approved by authority Door /
window Frame having 5 Years warranty against biological Agent like
Termite, Borers, Decay, Fungi, and harmful Insects also Warranty
against Seasoning Related Issues like Crack, Bending, Twisting,
Warping, and Joint Related Issues Like joint Failure or Adhesion
Failure. 10% Amount Retain for this Item. (A) Indian Teak Wood ALL
FLOOR
1105.00 Cu.Dm 690.00
50 Providing and fixing 35 mm thick solid core flush door Shutter of
approved make both side lamination using 1mm thick approved
laminate sheets with 6mm thk Lipping/border patti around flush
hutter including fixing SS hinges, 6 no. - hold fast of size 40
x6mm flat 300 mm long, wedges, keys, nails, catch screw, lever
latches , handles (15 cm), aldrops (20 cms), Tower bolts, (20
cms),tadis etc and cutting/ drilling of necessary holes in masonry/
concrete and grouting of holdfasts with (1:2:4) cement concrete all as
per drawing, specification and direction of the Engineer, all
materials, tools,plant and labour complete c. (All fixtures &
fittings shall be stainless steel of approved quality). Flush Door
having Treated from Termite, Borers, Decay, Fungi, and harmful
Insects Proof. As per approved by architect/Engineer Incharge.(ALL
FLOOR)
53.00 Sq.Mt. 3898.00
51 Providing and fixing 30mm thick FACTORY MADE SOLID PANEL PVC
DOOR SHUTTER consisting of frame made out of M.S. tubes of 19
gauge thickness and size of 19mm x 19mm for stiles and 15mm x 15
mm for top and bottom rails. M.S. frame shall have a coat of steel
primers of approved make and manufacture, M.S. frame shall be
covered with 5 mm thick heat moulded PVC ‘C’ channel of size 30 x 50
mm forming stiles, and 5mm thick 75mm wide PVC sheets for top rail,
lock rail and bottom rail on either side, and 10mm (5mm x 2) thick,
20mm wide cross PVC sheet as gap insert for top rail and bottom rail,
Panelling of 5 stiles and rails with 30mm wide x 5mm thick PVC sheet
beading on eighter side, and joined together with solvent cement
adhesive,. An additional 5mm thick PVC strip of 20mm width is to be
stculk on the interior side of the ‘c’ channel using PVC solvent cement
adhesive etc. complete as per direction of Engineer in charge,
manufacture’s specification and drawing. ALL FLOOR BATH /WC
DOOR
6.38 Sq.Mt. 1632.00
Page 7 of 15
Name of work :- PART B Renovation & Upgradation Work At SAPTI Campus DhrangadhraEstimate For PART B (Kitchen Dining,Class Room & Studio, Admin Block, Workshop 1&2 Display & Shop)
SR.
NODESCRIPTION Quantity UNIT RATE AMOUNT
52 Providing and fixing 35 mm thick Teak wood shutters for Doors,
windows and clerestory windows including Indian teak wood frames
10 cm x 7 cm. size Frame & (75mm x25mm window shutter frame)
including black enamel led iron oxidixed fixtures and fastenings
including one coat primer & 2 coats of enamel paintof approved
quality & also including 5mm Frosted / Bajri Glass panel fixed with
beading patti as per Detail etc, complete. framede and fixed in
position with required hold fast of size 40 x6mm flat 150 mm
long as per drawing. Including one coat of wood primer & 2 coats of
Enamel Paint as per Direcet shade (asian, berger, indigo etc)&all lead
& lift, loading, un loading ,labour, tools, etc & Teakwood is well
seasonded,tested, Bitumen painted & approved by authority Door /
window Frame having 5 Years warranty against biological Agent like
Termite, Borers, Decay, Fungi, and harmful Insects also Warranty
against Seasoning Related Issues like Crack, Bending, Twisting,
Warping, and Joint Related Issues Like joint Failure or Adhesion
Failure. 10% Amount Retain for this Item. (i) Fully Glazed. (All Floor)
24.00 Sq.Mt. 3683.00
53 Providing and fixing glazed louvered glass windows and
ventilators with teak wood frame 10cm. x 7cm. size including 3 coats
of oil painting to wood work etc.complete.
2.00 Sq.Mt. 3213
54 Providing and fixing sheet glass, selected quality bedded in putty and
fixed with wooden beading including the cost of wooden beadings of
first class teak wood and necessary cutting of glass. (1) 5 mm thick.
9.00 Sq.Mt. 743
55 Refurbishing of the exiting panelled door / window with Removed
old (ONLY) damaged planks & fixing new panel as per existing
teakwood & Change required hard ware like handle, Door stoppers,
Hinges,Tadis,Tower bolts etc. with all necessary hardware. &
complete Painting work on both side of Door/ window as per
directed Shade with required send papering, finishing work etc.
complete as per the directed Engg.-in charge. (measured only
opening Size on One Time)
111.00 Sq.Mt. 1260
56 Pro.& Fixing standard extruded of alluminium section of size 63mm x
38.10mm x 1.2 mm(of jindal Section No.2434, @ Wt 0.643 kg/Rmt)
with colour anodized alluminium frame for Ventilation with 5 mm
thick frosted glass as detail etc complete for Ventilation.
0.70 Sq.Mt. 1386
57 Providing & fixing of Fix louvered work. The main frames both
verticals have to be pipes of 100 mm x 50 mm x 1.7 mm with colour
anodized 20 micron (silver) thick all coloure anodized of 15 microns.
All hardware, labour, scafolding, fixtures,fastners transport and all
other taxes included etc. complete as per architect's details at all
floor levels.
42.00 Sq.Mt. 4111
58 Providing & fixing 12 mm thk.Toughned Glass Partition up to 3000
mm ht (As per required) Made from 12 mm Toughned Glass fixed
with Dorma Channel in Bottom & Top level with framing size of
35mm x 35mm x 1.5mm complete as shown in the drg. & design or as
directed by Engg. In charge. including all materials and labour,Tools,
any Floor, loading, un loading, necessary hardware. filling of sealant
etc. (Quantity measured only elevated part at bottom of Ceiling level
& Door Opening shall be deducted from partition Qty & Door will be
measured and paid separately)
36.00 Sq.Mt. 3431
59 Providing & fixing of Full Glass Door on Patch Fitting Providing and
fixing glass door with patch fitting door as shown in the drg. Door
shall consist of make 12mm thk. toughened clear float glass. Rate
shall include necessary designer film, approved locking systems, SS
Handle pair, floor springs (Heavy duty or equivalent), gaskets &
miscellaneous hardware items. Including all materials and labour etc.
complete as per detail drawing and instruction of engineer-in charge
and consultant.
6.20 Sq.Mt. 5695
Page 8 of 15
Name of work :- PART B Renovation & Upgradation Work At SAPTI Campus DhrangadhraEstimate For PART B (Kitchen Dining,Class Room & Studio, Admin Block, Workshop 1&2 Display & Shop)
SR.
NODESCRIPTION Quantity UNIT RATE AMOUNT
60 Supplying and installing in position TABLE of approved make, colour
and size 1200mm(L)X600mm(W)X750mm(H) with top made up of 25
mm thick prelaminated board and having superior edge profile
supported on Gable ends/sides made out of 18mm thick prelam
particle boards with 2mm thick PVC edge banding. Modesty panels in
18mm thk prelam particle board. Gable ends & modesty exposed
edges are in 2 mm thick PVC edge banding & sealed edges are in 0.8
mm thick PVC edge banding. Wire routing/ wire management shall be
provided on study table or side table as specified. Table should have
two Drawer of size 400mm(L)X400mm(W)X 100mm(H) made up 18
mm thick prelam particle board with Telescopic chanel. (Amardeep/
Godrej or equivalent Make)
16.00 Nos 7800
61 Providing & supplying of Medium Back Chair Back Frame in Moulded
Nylon & PP, PU moulded Cushion on Seat,Back Lumber Support,
Nylon Mesh in Back with Adjustable arms,, crome base, synchronised
mechanisam & Gas lift (Amardeep/ Godrej or equivalent Make)
19.00 Nos 4620
62 Supplying and installing in position main table of approved make,
colour and size 1800mm(L)X900mm(W)X750mm(H) with top made
up of 25 mm thick exterior grade prelaminated board and having
superior edge profile supported on Gable ends/sides made out of
25mm thick prelam particle boards with 2mm thick PVC edge
banding. Modesty panels in 18mm thk prelam particle board. Gable
ends & modesty exposed edges are in 2 mm thick PVC edge banding
& sealed edges are in 0.8 mm thick PVC edge banding. Wire routing/
wire management shall be provided on main table or side storage as
specified. Side Storge size 1800mm(L)X450mm(W)X675mm(H) made
up 25 mm thick prelam particle board top supported with storage
cabinet three Drawer unite below in 18mm thick prelam particle
board Openable Shutter & back of the unit made up of 9 mm particle
board with 75 mm thick skirting. (Amardeep/ Godrej or equivalent
Make)
1.00 Nos 42000
63 Providing & supplying of High Back Chair Back Frame in Moulded
Nylon & PP , With Angle Adjustable Head Rest , Back in breathable
Mesh , PU moulded Cushion on Seat, Adjustable arms, Center Tilting
Mech, Chrome base & Gas Lift (Amardeep/ Godrej or equivalent
Make)
1.00 Nos 5400
64 SEATING SOFA Frame in Hardwood fully Cushioned in Seat & Back,
With arms. Teakwood Legs at the base dully polished with loose
cushion. Two Seater Sofa - 1400mmW x 750mmD x 750mmH,
Armrest 150mm - Seat 550mm (Amardeep/ Godrej or equivalent
Make)
1.00 Nos 21600
65 Square Table, Table with top in BSL of 25mm thik with all Sides Edge
Banding, Frame in Stainless Steel with 20mm x 40mm Reactangle pipe
of 16g. Table Size :- 600mm L x 600mm W x 450mm H (Amardeep/
Godrej or equivalent Make)
1.00 Nos 9120
66 Providing & Fixing of Steel work, with welded / bolting/ riveting etc.
in built up sections framed work including cutting,bending, hoisting,
fixing in position with proper line level as per detail Or directed by
Engg In charge & applying a priming coat of read lead paint. & 2 coat
Enemal Paint (A) In beams and joists, channels angles Tees, flats, with
connecting plates or angle cleats as in main and cross beams. Hip and
jack rafters, purlins conneted to common rafters etc.for any height
Complete with all lead and lift, Loading un loading,Labour tools,
Scaffolding, Staging, Rope, Pully all mechanical tools etc
3100.00 Kg 63.66
Page 9 of 15
Name of work :- PART B Renovation & Upgradation Work At SAPTI Campus DhrangadhraEstimate For PART B (Kitchen Dining,Class Room & Studio, Admin Block, Workshop 1&2 Display & Shop)
SR.
NODESCRIPTION Quantity UNIT RATE AMOUNT
67 Providing & Suppling of The feed material is manufactured out of
nominal 40mm thick PUF Insulated continuous sandwich panels( 0.5
mm thick pre coated GI sheet on both side of Polyurethane foam with
external face being corrugated) 0.5 mm total coated thickness (TCT),
Hi-tensile steel with minimum 245 / 345 MPa yield strength, SDP
Paint finish. The paint will have a total coating thickness of 35 micron,
comprising of nominal 20 micron exterior coat on top surface and
nominal 5 micron reverse coat on back surface Top Skin elements to
be supplied in required length with laps as per detail drawing with a
sheet element cover width of 400mm and a Regular standing seam
height Sheets are to be laid to meet the requirements of the building The secret fix halter clips shall be capable of transmitting all reaction
forces to the purlin without the aid of any other material, thus
resulting in an overall “Self-supporting standing seam roof system”.
which including the flashing also - All necessary flashings as per the
Shop drawings to be used and flashing material will have same
specification as top skin roofing material. Flashings are fixed with self
tapping screws of size 10- 12 x 14 mm with EPDM washers.(Roof
Support as per drawing & Roof Trusses Cost shall be paid Extra
under relevant item of work )
68 Providing and laying in trenches galvanised mild steel tubes (Midium
grade) of the following nominal bore, and tube fitting with all
necessary fittings and fixtures like tees, bends, elbows, unions, plugs,
sockets, double nipples etc. at all levels and heights and making good
of wall including cutting, threading, testing necessary jointing
inclusive of Proper insulation treatment, complete in all respects, and
as directed. (Earthwork in trenches to be measured and paid for
separately) (E) 65mm
20.00 R.Mt 552.00
69 Making connection of galvanised Mild steel distribution branch with
galvanised mild steel main 50mm to 80mm nominal bore by providing
and fixing tee including cutting and threading the pipes complete.
1.00 Nos 559.00
70 Providing laying and jointing in true line and level 15mm dia. U.P.V.C.
Pipe ( SCH-40) for cold water including fittings make PRINCE /
SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer
In Charge. Pipe shall be fixed on the wall with the help of clamp at
every two metre C/C or shall be concelled as directed including
necessary fittings etc. including testing of pipe and joints and fixing
the same with adhesive solvent, including cost of all materials.ALL
FLOOR
80.00 R.Mt 84.90
71 Providing laying and jointing in true line and level 25mm dia. U.P.V.C.
Pipe ( SCH-40) for cold water including fittings make PRINCE /
SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer
In Charge. Pipe shall be fixed on the wall with the help of clamp at
every two metre C/C or shall be concelled as directed including
necessary fittings etc. including testing of pipe and joints and fixing
the same with adhesive solvent, including cost of all materials (ALL
FLOOR)
75.00 R.Mt 107.00
72 Providing laying and jointing in true line and level 32mm dia. U.P.V.C.
Pipe ( SCH- 40) for cold water including fittings make PRINCE /
SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer
In Charge. Pipe shall be fixed on the wall with the help of clamp at
every two metre C/C or shall be concelled as directed including
necessary fittings etc. including testing of pipe and joints and fixing
the same with adhesive solvent, including cost of all materials. (ALL
FLOOR)
90.00 R.Mt 139
73 Providing laying and jointing in true line and level 50mm dia. U.P.V.C.
Pipe ( SCH-40) for cold water including fittings make PRINCE /
SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer
In Charge. Pipe shall be fixed on the wall with the help of clamp at
every two metre C/C or shall be concelled as directed including
necessary fittings etc. including testing of pipe and joints and fixing
the same with adhesive solvent, including cost of all materials.
45.00 R.Mt 229.00
Sq.Mt207.00 2528.00
Page 10 of 15
Name of work :- PART B Renovation & Upgradation Work At SAPTI Campus DhrangadhraEstimate For PART B (Kitchen Dining,Class Room & Studio, Admin Block, Workshop 1&2 Display & Shop)
SR.
NODESCRIPTION Quantity UNIT RATE AMOUNT
74 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working
pressure PVC pipes PRINCE / SUPREME / ASTRAL Make of the
following outside Dia. Low densidy, complete with special falnge
compression type fittings, with all necessary fittings and fixtures like
tees, bends, elbows, unions, plugs, sockets,wall clips , clamps etc.
including making good the wall ceiling and floor.as per directed (E)
50mm ALL FLOOR
30.00 R.Mt 150.00
75 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working
pressure PVC Pipe PRINCE / SUPREME / ASTRAL Make of the following
outside Dia. Low densidy, complete with special falnge compression
type fittings, with all necessary fittings and fixtures like tees, bends,
elbows, unions, plugs, sockets,wall clips , clamps etc. including
making good the wall ceiling and floor.as per directed (F) 75mm ALL
FLOOR
30.00 R.Mt 251.00
76 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working
pressure PVC pipe PRINCE / SUPREME / ASTRAL Make of the
following outside Dia. Low densidy, complete with special falnge
compression type fittings, with all necessary fittings and fixtures like
tees, bends, elbows, unions, plugs, sockets,wall clips , clamps etc.
including making good the wall ceiling and floor.as per directed
(G)110 mm (ALL FLOOR)
55.00 R.Mt 319.00
77 P & F to Wall Ceilling and Floor PVC (10 kg) Rain Water pipe of
110mm Dia Complete with Special flings, Compressor type Fittings,
Wall clips on pvc patty including making good the ceiling and floor on
terrace rain water pipe shall be 110 mm Dia. PVC horizontal pipe and
vertical pipe and 110mm bend at the end near by Ground level rate
are with all necessary fittings and fixtures like tees, bends, elbows,
unions, plugs, sockets,wall clips , clamps etc.
40.00 R.Mt 567.00
78 Providing and fixing in position cowel went to pipes.(B) 75mm dia. 3.00 Nos 363.00
79 Providing and fixing in position cowel went to pipes.(C) 100mm dia 3.00 Nos 491.00
80 Provding P.V.C. 50mm diameter & 450 to 600mm long water spouts
including necessary iron gratings as per drawings.
6.00 Nos 72.20
81 Providing and fixing PVC (SWR) Nahni trap IS 14735 for drain - 100
mm diameter with jali of the following nominal diameter of self
cleansing design with CP scread down or hinged grating including the
cost of cutting and making good the walls.ALL FLOOR
13.00 Nos 351.00
82 Providing and fixing PVC (SWR) Nahni trap IS 14735 for drain - 75 mm
diameter with jali of the following nominal diameter of self cleansing
design with CP scread down or hinged grating including the cost of
cutting and making good the walls.ALL FLOOR
10.00 Nos 344.00
83 Providing and fixing screw down bib taps of following size.(C) Gun
metal screw down bib tap. Cromium Plated (Good quality as per
Directed Make Ganga or equialant) As per Drawing or directed by
Engg In charge (i) 15mm dia.
22.00 Nos 184.00
84 Providing and fixing screw down bib taps of following size.(C) Gun
metal screw down bib tap. Cromium Plated (Good quality as per
Directed Make Ganga or equialant) As per Drawing or directed by
Engg In charge (i) 20mm dia.
2.00 Nos 206.00
85 Providing and fixing brass screw down stop tap.Cromium Plated
(Good quality as per Directed Make Ganga oe equialant) As per
Drawing or directed by Engg In charge (A) 15mm dia.
17.00 Nos 238.00
86 Providing and fixing Gun metal check or non-return fullway wheel
valve.C P (Good quality as per Directed /Make Ganga oR equialant) As
per Drawing or as per directed by Engg In charge(D) 32mm Dia
3.00 Nos 363.00
87 Providing and Fixing Cromium Plated Brass half Turn Flush Cock
(Good quality as per Directed Make Ganga or equialant) of Approved
Quality Including Fixing In Pipe Line etc complete. (II) 32mm Dia
10.00 Nos 318.00
Page 11 of 15
Name of work :- PART B Renovation & Upgradation Work At SAPTI Campus DhrangadhraEstimate For PART B (Kitchen Dining,Class Room & Studio, Admin Block, Workshop 1&2 Display & Shop)
SR.
NODESCRIPTION Quantity UNIT RATE AMOUNT
88 Providing & fixing wash down Water closet (European type W.C.)
Pan of Cera or Hindware brand)with integral 'P' or 'S' trape including
jointing the trape with soil pipe in cement mortar 1:1[1-Cement:1-
Fine sand], plastic seat and cover for wash down water closet with
C.P.Brass hinges and rubber buffers. [A] Vitreous China pattern in
white colour
4 Nos 876
89 Providing and fixing Urinal of approved quality including connection
with trap and with integral longitudinal flush pipe.including PVC Pipe
connection, PVC west Pipe/ West coupling etc Complete Asper
directed (A) Squating plate pattern white earthenware 550mm x
300mm.
7.00 Nos 977.00
90 Providing and fixing water closet squatting Pan (Indian type W.C. Pan)
size 580mm (Earthwork, bed concrete, foot reste and trap to be
measured and paid for separately) (A) Vitreous China.(I) Long pattern
= White colour
8.00 Nos 589.00
91 Providing and fixing 100mm size P or S trap for water closet squatting
pan including jointing the trap with the pan and soil pipe in cement
Mortar 1:1 (1-Cement : 1-Fine sand)(A) Vitreous China.
8.00 Nos 199.00
92 Providing and fixing in Cement Mortar 1:3 (1-Cement : 3-coarse
sand)a, pair of white vitreous China 250mm x 130mm x 30mm
footrest to long pattern squatting pan water closet.
8.00 Pair 88.50
93 Providing & fixing flat back Wash Basin of of Cera or Hindware brand
of size 550x400 mm with single hole for pillar tap with C.I. or
M.S.brackets painted white including cutting holes and making good
the same including C.P.Brass waste, M.I.Fisher union 32mm
dia.,15mm dia piller tap, capstan head, screw down high pressor with
screws, and back nuts, C.P.Brass stop tap, and plastic connection
P.V.C.Waste pipe, Rubber Plug etc.
5.00 Nos 1600.00
94 Providing & fixing SS soap dish holder etc. complete 4.00 Nos 900.00
95 Providing and fixing CP towel ring mounted on wall of Jaquar (1121
Continental)/ Parko (1576 Classic Line) including all accessories such
as brackets (coloured), fixed and anchoring etc. complete as directed.
4.00 Nos 949.00
96 Urinal Partition : Providing and fixing true line & slope 18mm thick
double side polished JET BLACK COLORED GRANITE STONE as a urinal
partition with machine cut edge to all sides including polishing
exposed edge of elevation, making necessary cutting in wall, floors or
where even required fixing the same with CM 1:2 (1 Cement : 2 Fine
sand) & making the adjoining surface as per original including curing
etc. complete as directed by Engineer in Charge.ALL FLOOR
3.50 Sq.Mt 2308.00
97 Providing and fixing 600mm x 450mm bevelled edge mirrror of
superior glass mounted on 6mm thick PVC Frame and fixing to
wooden pluge with C.P. brass screws and washers.
4.00 Nos 568.00
98 Supplying, Erecting & fixing double coated Syntex PVC. (ISI) Sintex
brand Only (not reno or any make) water tank of cylendrical vertical
type of required capacity moulded in one piece suitable for drinking
water storage made of high dencity polythelene with bulit in square
plateform & top lead with locking ring or threaded type lead. The
tank shall have checknut system to provide connections of suitable
diameter as directed by the engg. in charge. for inlet at top & for
outlet on sides with arrangement of overflow & wash out and also
fixing necessary boll valve of standard size etc. comp. as
directed.(2000 Ltr )
2.00 Nos 9200.00
99 Providing and fixing S.W. gully trap with C.I. grating brick masonry
chamber and water tight C.I. cover with frame of 300mm x 300mm
size (inside) with standard weight.(i) Square mouth traps.(B) 150mm
x 100mm size P or R type
4.00 Nos 1173.00
100 Providing laying (to level or slopes) and jointing reinforced concrete
Light duty non- pressure pipes I.S. class NP2 of the following internal
diameter with collars and butt ends prepared for collar joints
including testing of joints complete.(B) 150mm
25.00 R.Mt 150.00
Page 12 of 15
Name of work :- PART B Renovation & Upgradation Work At SAPTI Campus DhrangadhraEstimate For PART B (Kitchen Dining,Class Room & Studio, Admin Block, Workshop 1&2 Display & Shop)
SR.
NODESCRIPTION Quantity UNIT RATE AMOUNT
101 Providing laying (to level or slopes) and jointing reinforced concrete
Light duty non- pressure pipes I.S. class NP2 of the following internal
diameter with collars and butt ends prepared for collar joints
including testing of joints complete.(D) 300mm
65.00 R.Mt 260.00
102 Providing & supplying of SS STOCK POT STOVE (304) SS Top 16g With
Heavy Duty C.I. 400x 400 mm Pan Support Jali With Heavy Duty Fully
SS Inner Structuring with SS Burner Support & Plate SS Square Pipe
(40x40mm) 16 g. AISI 304 Stand With Nylon Adjustable Bullets With 4
Side 250mm Ht 19 g. AISI 304 SS Covering With Heavy Duty Full SS
Spillage/ Drip Tray 18 g. AISI 304 With Handle With High Quality
Subeam Big Cap Burner + Operating Gas Valve SIZE 600 x 600 x 450
(Janshakti industries / 2M Industries or Equilant Make)
4.00 Nos 20400.00
103 Providing & supplying of SS SINGLE SINK UNIT (304) SS Sunking type
top (16 g.) AISI 304 With Sink (Size : 18"x 18"x 11") 16 g. AISI 304 With
6" Raised Backsplash SS Legs of Sq. Pipe (40x40mm) 16 g. AISI 304
with 3 Side Cross Bracing Pipe Support of Sq. Pipe 32x32mm 16 g. AISI
304 All Legs to be fitted with Adjustable nylon Bush SS Inner Structure
of Sq. Pipe (32x32mm) 18 g. AISI 304 SIZE 600 x 600 x 800+150
(Janshakti industries / 2M Industries or Equilant Make)
1.00 Nos 20400.00
104 Providing & supplying of CHAPATI HOT PLATE WITH GOTI PUFFER
(304) MS 12mm Thick Polished Plate with 3 Side 25mm Border (48"x
24") & C.I. Goti Puffer Jali (12"x24") SS Stand (40x40mm) With 4 Side
250mm SS Covering With 1 U/S (19g.) AISI 304 With High Quality RV
Burners & Operating Valve Fittings With Vertical Set Up of RV Burner
for Full Plate Heating SIZE 1500 x 600 x 800mm ht.(Janshakti
industries / 2M Industries or Equilant Make)
1.00 Nos 47400.00
105 Providing & supplying of SS CHAPATI COLLECTION TABLE WITH 2 U/S
(304) SS Top (18 g.) AISI 304 to be turned down 40mm & 12mm
underneath With 6" Raised Back Splash SS Stand of Sq. Pipe
(40x40mm) 18 g. With 2 U/S (19 g.) to be fitted with Nylon Adjustable
bush Bottom Undershelf fitted with 125mm from Ground level &
Middle Shelf to be at equal distance & to be turned down 40mm &
12mm underneath in channel shape SS Inner Structure of Sq. Pipe
(32x32mm) 18 g. AISI 304 SIZE 600x600x800+150 (Janshakti
industries / 2M Industries or Equilant Make)
1.00 Nos 19200.00
106 Providing & supplying of SS CHAPATI ROLLING TABLE WITH 2 U/S
(304) SS Top (18 g.) AISI 304 to be turned down 40mm & 12mm
Underneath SS Stand of Sq. Pipe (40x40mm) 18 g. With 2 U/S (19 g.)
to be fitted with Nylon Adjustable bush SS Stand of Sq. Pipe
(40x40mm) 18 g. With 2 U/S (19 g.) to be fitted with Nylon Adjustable
bush Undershelf fitted with 125mm from Ground level to be turned
down 40mm & 12mm underneath in channel shape SS Inner
Structure of Sq. Pipe (32x32mm) 18 g. AISI 304 SIZE 1500 x 600 x 850
(Janshakti industries / 2M Industries or Equilant Make)
1.00 Nos 34500.00
107 Providing & supplying of SS PICK - UP TABLE WITH 2 U/S & 2 OH/S
(304) SS Top (18 g.) AISI 304 to be turned down 40mm & 12mm
underneath With 2 OH/S (19g.) SS Stand of Sq. Pipe (40x40mm) 18 g.
With 2 U/S (19 g.) to be fitted with Nylon Adjustable bush Undershelf
fitted with 125mm from Ground level to be turned down 40mm &
12mm underneath in channel shape SS Inner Structure of Sq. Pipe
(32x32mm) 18 g. AISI 304 SIZE 1500x 600x 850+ 150+ 450+ 300 (1500x
300) (Janshakti industries / 2M Industries or Equilant Make)
2.00 Nos 50400.00
Page 13 of 15
Name of work :- PART B Renovation & Upgradation Work At SAPTI Campus DhrangadhraEstimate For PART B (Kitchen Dining,Class Room & Studio, Admin Block, Workshop 1&2 Display & Shop)
SR.
NODESCRIPTION Quantity UNIT RATE AMOUNT
108 Providing & supplying of SS WORK TABLE WITH SINK & 2 U/S & 2 OH/S
(304) SS Top (18 g.) With 6" Raised Back Splash With Sink (Size : 16"x
16"x 8") 16 g. AISI 304 & 2 OH/S (19g.) SS Stand of Sq. Pipe (40x40mm)
18 g. With 2 U/S (19 g.) All Legs to be fitted with Nylon Adjustable
bush Undershelf fitted with 125mm from Ground level to be turned
down 40mm & 12mm underneath in channel shape SS Inner
Structure of Sq. Pipe (32x32mm) 18 g. AISI 304 SIZE 1800x 600x 850+
150+ 450+ 300 (1800x 300) (Janshakti industries / 2M Industries or
Equilant Make)
1.00 Nos 60000.00
109 Providing & supplying of SS STORAGE RACK WITH 5 SHELVES (304) SS
Shelf 19 g. with 3 side 25mm upside raised Border Pinched from all
sides & working side to be turned down 32 mm & 12 mm underneath
in channel shape Bottom Shelf to be fitted at 125mm ht from ground
level & all other shelves at equal distance SS Legs of Sq. Pipe
(40x40mm) 19 g. AISI 304, All Leg to be fitted with Nylon Adjustable
bush SIZE 900x 600x 1650 (Janshakti industries / 2M Industries or
Equilant Make)
8.00 Nos 33000.00
110 Providing & supplying of SS POT RACK WITH 4 SHELVES (304) SIZE
1125x 600x 1650 SS Stand Fabricated from SS 18 g 304 squre pipe
(40x40x18 g) inner SS 18g 304 Round pipe 25mm dia shelves 4
pcs.(Janshakti industries / 2M Industries or Equilant Make)
1.00 Nos 39000.00
111 Providing & supplying of SS PLATE RACK WITH 4 SHELVES (304) SS
Perforated Shelf 19 g. with 3 side 25mm upside raised Border Pinched
from all sides & working side to be turned down 32 mm & 12 mm
underneath in channel shape Bottom Shelf to be fitted at 125mm ht
from ground level & all other shelves at equal distance SS Legs of Sq.
Pipe (40x40mm) 19 g. AISI 304, All Leg to be fitted with Nylon
Adjustable bush SIZE 900x 600x 1650 (Janshakti industries / 2M
Industries or Equilant Make)
2.00 Nos 30000.00
112 Providing & supplying of SS CLEAN DISH TABLE WITH 2 U/S (304) SS
Top (18 g.) AISI 304 to be turned down 40mm & 12mm underneath
With 6" Raised Back Splash SS Legs of Sq. Pipe (40x40mm) 18 g. With
2 U/S (19 g.) to be fitted with Nylon Adjustable bush Bottom
Undershelf fitted with 125mm from Ground level & Middle Shelf to
be at equal distance & to be turned down 40mm & 12mm
underneath in channel shape SS Inner Structure of Sq. Pipe
(32x32mm) 18 g. AISI 304 SIZE 1500x 600x 850+ 150 (Janshakti
industries / 2M Industries or Equilant Make)
1.00 Nos 34800.00
113 Providing & supplying of SS 3 SINK UNIT (304) SS Sunking type top (16
g.) AISI 304 With Sink (Size : 20"x 20"x 11") 16 g. AISI 304 With 6"
Raised Backsplash SS Legs of Sq. Pipe (40x40mm) 16 g. AISI 304 with 3
Side Cross Bracing Pipe Support of Sq. Pipe 32x32mm 16 g. AISI 304
All Legs to be fitted with Adjustable nylon Bush SS Inner Structure of
Sq. Pipe (32x32mm) 18 g. AISI 304 SIZE 1800 x 600 x 850 + 150
(Janshakti industries / 2M Industries or Equilant Make)
1.00 Nos 44400.00
114 Providing,supplying & installation of SS CANTEEN BAIN MARIE WITH
5 GN PANS (1/1 x 150mm DEEP) & SERVICE RAIL (304) SS 18g Top
With Elevated 18g SS Tank With Drain Valve Fitting(RHS) High Quality
NSF Approved AISI 304 18/8 Food Grade GN Pan Containers with SS
Lid SS Square Pipe Stand (32x32mm) With 3 Side SS Covering & 1 U/S
(19g) & Electrical Panel (RHS) Electrical Panel (RHS) Fitted With
Electric Coil, Thermostat Controller, Rotary Switch & Indicator Lamps
1800 x 600 + 225 x 850 (Janshakti industries / 2M Industries or
Equilant Make)
1.00 Nos 96000.00
115 Providing & supplying of SS DUNNAGE RACK (304) Fabricated from SS
18, 304 40x 40mm Square pipe 1500x 600x 200(Janshakti industries /
2M Industries or Equilant Make)
1.00 Nos 13200.00
116 Providing & supplying of SS SWING BIN WITH CASTOR WHEEL (304)
SS Bin Fabricated from 19 g. 304 400x 400x 750 (Janshakti industries /
2M Industries or Equilant Make)
6.00 Nos 19200.00
Page 14 of 15
Name of work :- PART B Renovation & Upgradation Work At SAPTI Campus DhrangadhraEstimate For PART B (Kitchen Dining,Class Room & Studio, Admin Block, Workshop 1&2 Display & Shop)
SR.
NODESCRIPTION Quantity UNIT RATE AMOUNT
117 Providing & supplying of SS VEGETABLE CRATE HOLDING TROLLEY
(304) SS Square Pipe Structure With Heavy Duty Castor Wheel With L
Type Channel Slots for Holding Vegetable Crates With Back Side Fix
Pipe Closure Vegetable Crate Size: 21"x 14"x 10" ( 525 x 350 x 250mm
) 550x 425x 1800 (5 CRATE) (Janshakti industries / 2M Industries or
Equilant Make)
1.00 Nos 32400.00
118 Providing , Supplying & Connected with Electrical point of 4 DOOR
VERTICAL FRIDGE ( + TEMP.) (HOSHIZAKI) Full Stainless steel body
with Thick PUF insulation Embrako make compressor with Digital
controller Spring Loaded Doors witch lock mechanism Heavy Duty
Castor Wheel fitting on bottom with Fridge should be branded only.
No assembled. SIZE 1400 x 818 x 2050 (Janshakti industries / 2M
Industries or Equilant Make)
1.00 Nos 148800.00
119 Providing & Supplying of 150 Ltrs.WATER COOLER made frome SS
304 & 2 bib tap with drain arrangement 1 yer Waranty.((Janshakti
industries / 2M Industries or Equilant Make)
2.00 Nos 67800.00
120 Providing , Supplying & GARBAGE BIN+LID NILKAMAL or EQUIVALENT
MAKE 80 Ltr. Capacity.as per directed .
2.00 Nos 4800.00
Page 15 of 15