Parametric Technology Corporation
Transcript of Parametric Technology Corporation
COPYRIGHT 1994-7 PARAMETRIC TECHNOLOGY CORPORATION. ALL RIGHTS RESERVED.
This MOLD BASE LIBRARY TM Catalog may not be copied, reproduced, disclosed, transferred, or reduced toany form, including electronic medium or machine-readable form, or transmitted or publicly performed by anymeans, electronic or otherwise, unless Parametric Technology consents in writing in advance.
Use of the software has been provided under a Software License Agreement.
Information described in this manual is furnished for information only, is subject to change without notice, andshould not be construed as a commitment by Parametric Technology Corporation. Parametric Technology assumesno responsibility or liability for any errors or inaccuracies that may appear in this manual.
The software contains valuable trade secrets and proprietary information and is protected by United States copyrightlaws and copyright laws of other countries. Unauthorized use of the software or its documentation can result in civildamages and criminal prosecution.
PRINTING HISTORY
Pro/ENGINEER and Parametric Technology Corporation are registered trademarks, and, Pro/ASSEMBLY,Pro/CABLING, Pro/CASTING, Pro/CAT, Pro/CDT, Pro/COMPOSITE, Pro/DESIGN, Pro/DETAIL,Pro/DEVELOP, Pro/DIAGRAM, Pro/DIEFACE, Pro/DRAW, Pro/ECAD, Pro/FEATURE, Pro/FEM-POST,Pro/HARNESS-MFG, Pro/INTERFACE, Pro/LANGUAGE, Pro/LEGACY, Pro/LIBRARYACCESS, Pro/MFG,Pro/MESH, Pro/MOLDESIGN, Pro/NC-CHECK, Pro/PDM, Pro/PIPING, Pro/PLOT, Pro/REPORT,Pro/REVIEW, Pro/SCAN-TOOLS, Pro/SHEETMETAL, Pro/STEP-INTERFACE, Pro/SURFACE, are all productnames in the PTC product family, and the PTC logo are trademarks of Parametric Technology Corporation in theUnited States and other countries. All other company and product names are trademarks or registered trademarks oftheir respective owners.
All other company and product names are trademarks or registered trademarks of their respective owners.
US GOVERNMENT RESTRICTED RIGHTS LEGEND
This Software and Documentation are provided with RESTRICTED RIGHTS. Use, duplication, or disclosure by theGovernment is subject to restrictions as set forth in subparagraph (c)(1)(ii) of the Rights in Technical Data andComputer Software Clause at DFARS 252.227-7013 or Commercial Computer Software-Restricted Rights at 48CFR 52.227-19, as applicable. 1996 Parametric Technology Corporation. Unpublished—all rights reserved underthe copyright laws of the United States.
Parametric Technology Corporation128 Technology DriveWaltham, MA 021541-617-398-5000 Fax: 1-617-398-6000
Order Number DU-0024Printed in U.S.A.
Document Number Date Description
U00241094 10/06/94 NewMOLD BASE LIBRARYTM Catalog
U00240796 07/15/96 RevisedMOLD BASE LIBRARYTM Catalog
U00240197 01/20/97 RevisedMOLD BASE LIBRARYTM Catalog
TABLE OF CONTENTS
Mold Base Library i
ABOUT THE MOLD BASE LIBRARY
USING THIS CATALOG.............................................................................................. 1-1The D-M-E Company Catalog................................................................................... 1-2The HASCO Company Catalog................................................................................. 1-2The FUTABA Corporation Catalog........................................................................... 1-2
THE MOLD BASE LIBRARY STRUCTURE ............................................................. 1-3
USING THE MOLD BASE LIBRARY ........................................................................ 1-3
SECTION ID-M-E STANDARD AND METRIC
MOLD BASE ASSEMBLIESAND COMPONENT PARTS
D-M-E STANDARD MOLD BASE ASSEMBLIES
D-M-E MOLD BASE ASSEMBLIES........................................................................... 2-1
NEW D-M-E MOLD BASE ASSEMBLIES................................................................. 2-4New Assembly Representation Types ....................................................................... 2-4Views of New Representations.................................................................................. 2-6
NAMING CONVENTION .......................................................................................... 2-11Mold Base Assemblies............................................................................................. 2-11New Mold Base Assemblies .................................................................................... 2-12A-Clamping Plates................................................................................................... 2-12A Plates .................................................................................................................... 2-13X-1 Plates................................................................................................................. 2-13X-2 Plates................................................................................................................. 2-13B Plates .................................................................................................................... 2-14Ejector Housing Plates............................................................................................. 2-14Top Plates................................................................................................................. 2-15Support Plates .......................................................................................................... 2-15Ejector Plates ........................................................................................................... 2-15Ejector Bars.............................................................................................................. 2-15Stop Pin.................................................................................................................... 2-16Component Parts...................................................................................................... 2-16
TABLE OF MOLD BASE SIZES ............................................................................... 2-17
D-M-E BUSHINGS AND DOWELS
SHOULDER AND STRAIGHT BUSHING WITH NOMINAL I.D. FROM 3/4 TO 1-1/2INCHES .........................................................................................................................3-1
Generic Part Name: SD_BUSH................................................................................. 3-1
SHOULDER BUSHING WITH NOMINAL I.D. FROM TO 2 TO 3 INCHES........... 3-2
TABLE OF CONTENTS
ii Mold Base Library
Generic Part Name: SD_BUSH_L ............................................................................ 3-2
STRAIGHT BUSHING WITH NOMINAL I.D. FROM 3/4 TO 3 INCHES ............... 3-3Generic Part Name: STR_BUSH .............................................................................. 3-3
TUBULAR DOWEL WITH NOMINAL I.D. FROM 3/8 TO 7/8 INCHES ................ 3-4Generic Part Name: TUB_DOWEL.......................................................................... 3-4
D-M-E FASTENERS
HEXAGON SOCKET FLAT COUNTERSUNK HEAD CAP SCREW...................... 4-1Generic Part Name: HFHCS...................................................................................... 4-1
SOCKET HEAD STRIPPER BOLT ............................................................................. 4-2Generic Part Name: SHSB ........................................................................................ 4-2
SOCKET HEAD CAP SCREW .................................................................................... 4-5Generic Part Name: SHCS ........................................................................................ 4-5
D-M-E LOCATING RINGS
LOCATING RING, CATALOG NO. 6500 .................................................................. 5-1Generic Part Name: 6500 .......................................................................................... 5-1
LOCATING RING, CATALOG NO. 6501 .................................................................. 5-1Generic Part Name: 6501 .......................................................................................... 5-1
LOCATING RING, CATALOG NO. 6501ln ............................................................... 5-2Generic Part Name: 6501ln ....................................................................................... 5-2
LOCATING RING, CATALOG NO. 6502 .................................................................. 5-2Generic Part Name: 6502 .......................................................................................... 5-2
LOCATING RING, CATALOG NO. 6503 .................................................................. 5-3Generic Part Name: 6503 .......................................................................................... 5-3
LOCATING RING, CATALOG NO. 6504 .................................................................. 5-3Generic Part Name: 6504 .......................................................................................... 5-3
LOCATING RING, CATALOG NO. 6505ln ............................................................... 5-4Generic Part Name: 6505ln ....................................................................................... 5-4
LOCATING RING, CATALOG NO. 6510 .................................................................. 5-4Generic Part Name: 6510 .......................................................................................... 5-4
LOCATING RING, CATALOG NO. 6511 .................................................................. 5-5Generic Part Name: 6511 .......................................................................................... 5-5
LOCATING RING, CATALOG NO. 6520 .................................................................. 5-5Generic Part Name: 6520 .......................................................................................... 5-5
LOCATING RING, CATALOG NO. 6521 .................................................................. 5-6Generic Part Name: 6521 .......................................................................................... 5-6
LOCATING RING, CATALOG NO. 6522 .................................................................. 5-6Generic Part Name: 6522 .......................................................................................... 5-6
TABLE OF CONTENTS
Mold Base Library iii
LOCATING RING, CATALOG NO. 6524................................................................... 5-7Generic Part Name: 6524........................................................................................... 5-7
LOCATING RING, CATALOG NO. 6535................................................................... 5-7Generic Part Name: 6535........................................................................................... 5-7
LOCATING RING, CATALOG NO. 6536................................................................... 5-8Generic Part Name: 6536........................................................................................... 5-8
LOCATING RING, CATALOG NO. 6537................................................................... 5-8Generic Part Name: 6537........................................................................................... 5-8
D-M-E PINS AND SLEEVES
CORE PIN...................................................................................................................... 6-1Generic Part Name: CORE_PIN................................................................................ 6-1
EJECTOR SLEEVE....................................................................................................... 6-4Generic Part Name: EJ_SLV ..................................................................................... 6-4
HOTWORK EJECTOR PIN - LETTER SIZE DIAMETERS ...................................... 6-8Generic Part Name: EJ_PIN_LTR............................................................................. 6-8
HOTWORK EJECTOR PIN - SHOULDER TYPE .................................................... 6-10Generic Part Name: EJ_PIN_SD ............................................................................. 6-10
HOTWORK EJECTOR PINS - STRAIGHT TYPE ................................................... 6-12Generic Part Name: EJ_PIN_STR........................................................................... 6-12
LEADER PIN WITH NOMINAL DIAMETER FROM 3/4 TO 1-1/2 INCHES........ 6-17Generic Part Name: LD _PIN.................................................................................. 6-17
LEADER PIN WITH NOMINAL DIAMETER FROM 2 TO 3 INCHES.................. 6-21Generic Part Name: LD_PIN_L............................................................................... 6-21
RETURN PIN .............................................................................................................. 6-23Generic Part Name: RETURN_PIN ........................................................................ 6-23
SHOULDER LEADER PIN ........................................................................................ 6-25Generic Part Name: SD_LD_PIN............................................................................ 6-25
SPRUE PULLER PIN.................................................................................................. 6-30Generic Part Name: SPRUE_PIN............................................................................ 6-30
THROUGH HARDENED EJECTOR PINS ............................................................... 6-31Generic Part Name: HD_EJ_PIN............................................................................. 6-31
D-M-E SPRUE BUSHINGS
SPRUE BUSHING OF A SERIES ................................................................................ 7-1Generic Part Name: A_SERIES................................................................................. 7-1
SPRUE BUSHING OF AR SERIES.............................................................................. 7-4Generic Part Name: AR_SERIES.............................................................................. 7-4
SPRUE BUSHING OF B SERIES ................................................................................ 7-5
TABLE OF CONTENTS
iv Mold Base Library
Generic Part Name: B_SERIES ................................................................................ 7-5
SPRUE BUSHING OF L SERIES ................................................................................ 7-9Generic Part Name: L_SERIES................................................................................. 7-9
SPRUE BUSHING OF LN SERIES ........................................................................... 7-11Generic Part Name: LN_SERIES............................................................................ 7-11
SPRUE BUSHING OF U SERIES.............................................................................. 7-13Generic Part Name: U_SERIES .............................................................................. 7-13
SPRUE BUSHING OF UR SERIES ........................................................................... 7-15Generic Part Name: UR_SERIES............................................................................ 7-15
SPRUE BUSHING OF UV SERIES ........................................................................... 7-16Generic Part Name: UV_SERIES ........................................................................... 7-16
D-M-E METRIC MOLD BASE ASSEMBLIES
NAMING CONVENTIONS.......................................................................................... 8-1
TABLE OF MOLD BASE SIZES................................................................................. 8-3
D-M-E METRIC PINS AND SLEEVES
EJECTOR PIN, TYPE A AND AH............................................................................... 9-1Generic Part Name: EJECT _PIN ............................................................................. 9-1
EJECTOR SLEEVE, TYPE S ....................................................................................... 9-3Generic Part Name: EJ_SLEEVE.............................................................................. 9-3
LEADER PIN, TYPE FSN............................................................................................ 9-4Generic Part Name: PIN_FSN................................................................................... 9-4
LEADER PIN, TYPE FSC ............................................................................................ 9-9Generic Part Name: PIN_FSC................................................................................... 9-9
LEADER PIN BUSHING, TYPE FBC....................................................................... 9-14Generic Part Name: PIN_FBC ................................................................................ 9-14
LEADER PIN BUSHING, TYPE FBN....................................................................... 9-16Generic Part Name: PIN_FBN ................................................................................ 9-16
D-M-E METRIC LOCATING RINGS
LOCATING RING WITH FLANGE, TYPE R, SERIES 20 TO 60........................... 10-1Generic Part Name: RING_R1................................................................................ 10-1
LOCATING RING WITHOUT FLANGE, TYPE R, SERIES 20 TO 60................... 10-2Generic Part Name: RING_R2................................................................................ 10-2
LOCATING RING WITHOUT FLANGE, TYPE R, SERIES 16.............................. 10-3Generic Part Name: RING_R3................................................................................ 10-3
LOCATING RING WITH FLANGE, TYPE RB, SERIES 16 TO 60 ........................ 10-4Generic Part Name: RING_RB1 ............................................................................. 10-4
LOCATING RING WITHOUT FLANGE, TYPE RB, SERIES 12 TO 60................ 10-5
TABLE OF CONTENTS
Mold Base Library v
Generic Part Name: RING_RB2.............................................................................. 10-5
D-M-E METRIC SPRUE BUSHINGS
SPRUE BUSHINGS, TYPE AG, AGK, AGM AND AGN ........................................ 11-1Generic Part Name: BUSHING_AG ....................................................................... 11-1
D-M-E METRIC TUBULAR DOWELS
LOCATING SLEEVES AND TUBULAR DOWELS, TYPE TD.............................. 12-1Generic Part Name: SLEEVE_TD........................................................................... 12-1
D-M-E METRIC SCREWS
SOCKET HEAD CAP SCREWS ................................................................................ 13-1Generic Part Name: SCREW_M ............................................................................. 13-1
FLAT COUNTERSUNK SOCKET HEAD SCREWS ............................................... 13-5Generic Part Name: SCREW_SM ........................................................................... 13-5
SECTION IIHASCO STANDARD AND METRIC
MOLD BASE ASSEMBLIESAND COMPONENT PARTS
HASCO STANDARD MOLD BASE ASSEMBLIES
HASCO MOLD BASE ASSEMBLIES....................................................................... 14-2
NEW HASCO MOLD BASE ASSEMBLIES............................................................. 14-6New Assembly Representation Types ..................................................................... 14-6Views of New Representations................................................................................ 14-8
NAMING CONVENTION ........................................................................................ 14-17Mold Base Assemblies........................................................................................... 14-17New Mold Base Assemblies .................................................................................. 14-18Top Clamping Plate ............................................................................................... 14-18Bottom Clamping Plate.......................................................................................... 14-18Clamping and Cavity Plate .................................................................................... 14-19Multi-Purpose Cavity Plates .................................................................................. 14-19Back Up Plates....................................................................................................... 14-20Ejector Retaining Plates......................................................................................... 14-20Ejector Plates ......................................................................................................... 14-20Component Parts.................................................................................................... 14-20
TABLE OF MOLD BASE SIZES ............................................................................. 14-21
HASCO BUSHINGS
BUSHING, CATALOG NO. ZI10 .............................................................................. 15-1Generic Part Name: ZI10......................................................................................... 15-1
TABLE OF CONTENTS
vi Mold Base Library
BUSHING, CATALOG NO. ZI11 .............................................................................. 15-6Generic Part Name: ZI11......................................................................................... 15-6
BUSHING, CATALOG NO. ZI20 .............................................................................. 15-9Generic Part Name: ZI20......................................................................................... 15-9
HASCO LOCATING RINGS
LOCATING RING, CATALOG NO. KI110 .............................................................. 16-1Generic Part Name: KI110 ...................................................................................... 16-1
LOCATING RING, CATALOG NO. KI113 .............................................................. 16-2Generic Part Name: KI113 ...................................................................................... 16-2
HASCO PINS
PIN, CATALOG NO. ZI00 ......................................................................................... 17-1Generic Part Name: ZI00......................................................................................... 17-1
PIN, CATALOG NO. ZI03 ....................................................................................... 17-15Generic Part Name: ZI03....................................................................................... 17-15
PIN, CATALOG NO. ZI41 ....................................................................................... 17-30Generic Part Name: ZI41....................................................................................... 17-30
PIN, CATALOG NO. ZI551 ..................................................................................... 17-34Generic Part Name: ZI551..................................................................................... 17-34
HASCO SPRUE BUSHINGS
SPRUE BUSHING, CATALOG NO. ZI512............................................................... 18-1Generic Part Name: ZI512....................................................................................... 18-1
SPRUE BUSHING, CATALOG NO. ZI513............................................................... 18-4Generic Part Name: ZI513....................................................................................... 18-4
HASCO SCREWS
SCREW, CATALOG NO. ZI31 .................................................................................. 19-1Generic Part Name: ZI31......................................................................................... 19-1
SCREW, CATALOG NO. ZI33 .................................................................................. 19-2Generic Part Name: ZI33......................................................................................... 19-2
SCREW, CATALOG NO. ZI35 .................................................................................. 19-4Generic Part Name: ZI35......................................................................................... 19-4
SCREW, CATALOG NO. ZI38 .................................................................................. 19-5Generic Part Name: ZI38......................................................................................... 19-5
HASCO METRIC MOLD BASE ASSEMBLIES
NAMING CONVENTION.......................................................................................... 20-1Mold Base Assembly............................................................................................... 20-2Clamping Plates....................................................................................................... 20-2
TABLE OF CONTENTS
Mold Base Library vii
Cavity Plate.............................................................................................................. 20-3Back Up Plates......................................................................................................... 20-3Ejector Retaining Plates........................................................................................... 20-3Ejector Base Plates................................................................................................... 20-3Component Parts...................................................................................................... 20-4
TABLE OF MOLD BASE SIZES ............................................................................... 20-4
HASCO METRIC PINS
PIN, CATALOG NO. Z00 ........................................................................................... 21-1Generic Part Name: Z00 .......................................................................................... 21-1
PIN, CATALOG NO. Z03 ........................................................................................... 21-2Generic Part Name: Z03 .......................................................................................... 21-2
PIN, CATALOG NO. Z40 ........................................................................................... 21-3Generic Part Name: Z40 .......................................................................................... 21-3
PIN, CATALOG NO. Z49 ......................................................................................... 21-10Generic Part Name: Z49 ........................................................................................ 21-10
HASCO METRIC LOCATING RINGS
LOCATING RING, CATALOG NO. K100................................................................ 22-1Generic Part Name: K100........................................................................................ 22-1
LOCATING RING, CATALOG NO. K500................................................................ 22-4Generic Part Name: K500........................................................................................ 22-4
HASCO METRIC BUSHINGS
BUSHING, CATALOG NO. Z10................................................................................ 23-1Generic Part Name: Z10 .......................................................................................... 23-1
BUSHING, CATALOG NO. Z11................................................................................ 23-6Generic Part Name: Z11 .......................................................................................... 23-6
BUSHING, CATALOG NO. Z20.............................................................................. 23-12Generic Part Name: Z20 ........................................................................................ 23-12
BUSHING, CATALOG NO. Z45.............................................................................. 23-15Generic Part Name: Z45 ........................................................................................ 23-15
HASCO METRIC SCREWS
SCREW, CATALOG NO. Z30.................................................................................... 24-1Generic Part Name: Z30 .......................................................................................... 24-1
SCREW, CATALOG NO. Z31.................................................................................... 24-2Generic Part Name: Z31 .......................................................................................... 24-2
SCREW, CATALOG NO. Z33.................................................................................... 24-3Generic Part Name: Z33 .......................................................................................... 24-3
SCREW, CATALOG NO. Z34.................................................................................... 24-4
TABLE OF CONTENTS
viii Mold Base Library
Generic Part Name: Z34.......................................................................................... 24-4
SCREW, CATALOG NO. Z35 ................................................................................... 24-5Generic Part Name: Z35.......................................................................................... 24-5
SCREW, CATALOG NO. Z69 ................................................................................... 24-6Generic Part Name: Z69.......................................................................................... 24-6
HASCO METRIC SPRINGS
SPRING, CATALOG NO. Z60................................................................................... 25-1Generic Part Name: Z60.......................................................................................... 25-1
SPRING, CATALOG NO. Z64................................................................................... 25-7Generic Part Name: Z64.......................................................................................... 25-7
HASCO METRIC SPRUE BUSHINGS
SPRUE BUSHING, CATALOG NO. Z51.................................................................. 26-1Generic Part Name: Z51.......................................................................................... 26-1
SPRUE BUSHING, CATALOG NO. Z511................................................................ 26-4Generic Part Name: Z511........................................................................................ 26-4
SECTION IIIFUTABA METRIC
MOLD BASE ASSEMBLIESAND COMPONENT PARTS
FUTABA METRIC MOLD BASE ASSEMBLIES
LIBRARY ORGANIZATION..................................................................................... 27-1
RETRIEVING ASSEMBLIES FROM THE LIBRARY ............................................ 27-6
TABLE OF MOLD BASE AND PLATE SIZES........................................................ 27-6
FUTABA METRIC BUSHINGS
GUIDE BUSH, CATALOG NO. GBA ....................................................................... 28-1Generic Part Name: GBA_FM ................................................................................ 28-1
GUIDE BUSH, CATALOG NO. GBB ....................................................................... 28-2Generic Part Name: GBB_FM ................................................................................ 28-2
SPRUE BUSH, CATALOG NO. SBA........................................................................ 28-3Generic Part Name: SBA_FM................................................................................. 28-3
SPRUE BUSH, CATALOG NO. SBB........................................................................ 28-4Generic Part Name: SBB_FM ................................................................................. 28-4
PRE-HARDENED SPRUE BUSH, CATALOG NO. SBC ........................................ 28-5Generic Part Name: SBC_FM ................................................................................. 28-5
PRE-HARDENED SPRUE BUSH, CATALOG NO. SBD........................................ 28-6Generic Part Name: SBD_FM................................................................................. 28-6
TABLE OF CONTENTS
Mold Base Library ix
FUTABA METRIC PINS
STRAIGHT EJECTOR PIN, CATALOG NO. EA ..................................................... 29-1Generic Part Name: EA_FM.................................................................................... 29-1
STRAIGHT EJECTOR PIN, CATALOG NO. EJ....................................................... 29-2Generic Part Name: EJ_FM..................................................................................... 29-2
GUIDE PIN, CATALOG NO. GPA ............................................................................ 29-4Generic Part Name: GPA_FM................................................................................. 29-4
RETURN PIN, CATALOG NO. RPN......................................................................... 29-5Generic Part Name: RPN_FM ................................................................................. 29-5
FUTABA METRIC LOCATING RINGS
LOCATING RING, CATALOG NO. LRA................................................................. 30-1Generic Part Name: LRA_FM................................................................................. 30-1
LOCATING RING, CATALOG NO. LRB................................................................. 30-2Generic Part Name: LRB_FM ................................................................................. 30-2
FUTABA METRIC SCREWS
SCREW........................................................................................................................ 31-1Generic Part Name: SHCS_FM............................................................................... 31-1
Mold Base Library 1 - 1
ABOUT THE MOLD BASE LIBRARY
The MOLD BASE LIBRARY is a collection of standard mold bases and component parts, basedon the D-M-E, HASCO, and FUTABA company standard catalogs, ready for use in yourPro/MOLDESIGN assemblies. The MOLD BASE LIBRARY contains the following:
• Mold base assemblies — Standard mold bases in a range of sizes, including varioussizes of plates and housings
• Component parts — A range of standard parts for use in your mold bases, includingcore pins, ejector pins, ejector sleeves, stop pins, support pillars, leader pins, shoulderand straight bushings, cap screws, stripper bolts, sprue bushings, and locating rings
USING THIS CATALOG
This document contains illustrations that document all the MOLDBASE LIBRARY objects, and all the information necessary to findand use any object. This catalog contains the following sections:
• SECTION I — This section contains the D-M-E standardand metric mold base assemblies and component parts.
• SECTION II — This section contains the HASCOstandard and metric mold base assemblies and componentparts.
• SECTION III — This section contains the FUTABAmetric mold base assemblies and component parts.
Mold bases and component parts are implemented as standardassembly families and part families. Before you specify a mold baseto retrieve, you should know the mold base size. Therefore, youshould become familiar with locating the mold bases in this catalog.
You can also browse the MOLD BASE LIBRARY using the yellowone-line help appearing in the Message Window of Pro/ENGINEER.When your mouse cursor is over a menu item of the library, whethera directory, assembly name, or part name, the system displays thecontents of the highlighted item.
The chapter names in this document correspond to the directories inthe MOLD BASE LIBRARY in which the mold bases and componentparts are located. At the beginning of this catalog is the Table ofContents that lists, by name and description, all the mold baseassemblies and component parts. Refer to the Table of Contents whenyou are searching for a particular item.
1
ABOUT THE MOLD BASE LIBRARY
1 - 2 Mold Base Library
The D-M-E Company Catalog
The mold bases and component parts listed in Section I of this catalogwere created according to the specifications given in the D-M-ECompany’s catalog,Molding Systems and Tooling for the 90’s. Thedimensions of all parts and assemblies included in this catalog areexactly the same as those with the corresponding names in theD-M-E Company’s catalog. You can refer to the appropriate sectionsof the D-M-E Company’s catalog if necessary.
The HASCO Company Catalog
The mold bases and component parts listed in Section II of this catalogwere created according to the specifications given in the HASCOCompany’s catalog,The HASCO Standard Mold Base Library. Thedimensions of all the parts and assemblies included in this catalog areexactly the same as those with the corresponding names in theHASCO Company’s catalog. You can refer to the appropriate sectionsof the HASCO Company’s catalog if necessary.
The FUTABA Corporation Catalog
The mold bases and component parts listed in Section III of thiscatalog were created according to the specifications given in theFUTABA Corporation’s catalog. The dimensions of all the parts andassemblies included in this catalog are exactly the same as those withthe corresponding names in the FUTABA catalog. You can refer tothe appropriate sections of the FUTABA catalog if necessary.
For information on how to create a library catalog, refer to the sectionon installing libraries in thePro/ENGINEER Installation andAdministration Guide.
ABOUT THE MOLD BASE LIBRARY
Mold Base Library 1 - 3
THE MOLD BASE LIBRARY STRUCTURE
The following figure shows the directory structure of the MOLDBASE LIBRARY.
Figure 1-1The MOLD BASE LIBRARY Directory Structure
USING THE MOLD BASE LIBRARY
For more information on using the MOLD BASE LIBRARY, see thechapter The Mold Base Library inIntroduction to the Libraries.
moldlib
prolib_loadpoint
hascomoldlib
standard_h metric_h
assy_hs comp_hs assy_hm comp_hm
dmemoldlib
standard_d metric_d
assy_ds comp_ds assy_dm comp_dm
futmoldlib
assy_fm comp_fm
Mold Base Library 2 - 1
1D-M-E STANDARD MOLD BASE ASSEMBLIES
This chapter describes the D-M-E standard mold base assemblies. The chapter contains the fol-lowing sections:
• D-M-E Mold Base Assemblies• New D-M-E Mold Base Assemblies• Naming Conventions• Tables of Mold Base Sizes
NOTE: To retrieve these standard assemblies, you must eithercreate the library catalog file, or include in the config.pro filethe search path for the stop pin (“stop_pin”) and othercomponent parts.
D-M-E MOLD BASE ASSEMBLIES
On the following pages are basic views of the D-M-E standard moldbase representations. These representations include only the plates forthe mold bases.
Figure 2-1Standard Mold Base Assembly - Types A and AX
Plate View (18x20a.asm, 18x20ax.asm)for the AX series, plate X-1 exists;
for the A series, plate X-1 does not exist
Top View Isometric View
Cross-sectional ViewSide View
D-M-E STANDARD MOLD BASE ASSEMBLIES
2 - 2 Mold Base Library
Figure 2-2Standard Mold Base Assembly - Type B
Top ViewIsometric View
Cross-sectional View
Side View
Plate View (18x20b.asm)
D-M-E STANDARD MOLD BASE ASSEMBLIES
Mold Base Library 2 - 3
Figure 2-3Standard Mold Base Assembly - Type T
Top ViewIsometric View
Cross-sectional ViewSide View
Plate View (18x20t.asm)
D-M-E STANDARD MOLD BASE ASSEMBLIES
2 - 4 Mold Base Library
NEW D-M-E MOLD BASE ASSEMBLIES
The D-M-E MOLD BASE Library contains both basic assemblies,which include only plates, and new assemblies, which include theplates and the component parts. This section describes the newD-M-E mold base assemblies and contains the following subsections:
• Assembly representation types• Views of representations
For information on setting up search paths for access to theseassemblies, refer to the chapter The D-M-E Standard Mold BaseAssemblies inIntroduction to the Libraries.
New Assembly Representation Types
There are now three types of representations of the assemblies:
• The simplified representation “curve”• The simplified representation “plates” as displayed in the
previous section• The master representation, which is the assembly with
components
Examples of the “curve” and the assemblies with components areshown on the next few pages.
These assemblies are named according to specific conventions. Eachstandard mold base assembly contains a different combination ofplates and components. The combinations are listed below:
Table 1: Contents of Each Mold Base Type
Mold Type Contains Plates Contains Components
A Top Clamping Plate“A” Plate“B” Plate
Support PlateEjector (Retainer) Plate
Ejector Plate (Bar)(Ejector) Housing
Locating RingSprue Bushing
Return PinSocket Head Cap Screws
Flat Head ScrewsTubular Dowel
Stop PinSprue Puller Pin
Leader PinShoulder Bushing
D-M-E STANDARD MOLD BASE ASSEMBLIES
Mold Base Library 2 - 5
Refer to thecomp_ds directory for more information about eachcomponent.
AX Top Clamping Plate“A” Plate
“X-1” Plate“B” Plate
Support PlateEjector (Retainer) Plate
Ejector Plate (Bar)(Ejector) Housing
Locating RingSprue Bushing
Return PinSocket Head Cap Screws
Flat Head ScrewsTubular Dowel
Stop PinSprue Puller Pin
Leader PinShoulder Bushing
B “A” Clamping Plate“B” Plate
Ejector (Retainer) PlateEjector Plate (Bar)(Ejector) Housing
Locating RingSprue Bushing
Return PinSocket Head Cap Screws
Flat Head ScrewsStop Pin
Sprue Puller PinLeader Pin
Shoulder Bushing
T “A” Clamping Plate“X-1” Plate“X-2” Plate“B” Plate
Support PlateEjector (Retainer) Plate
Ejector Plate (Bar)(Ejector) Housing
Locating RingSprue Bushing
Return PinSocket Head Cap Screws
Flat Head ScrewsTubular Dowel
Stop PinSprue Puller Pin
Leader PinShoulder Bushing
Table 1: Contents of Each Mold Base Type
Mold Type Contains Plates Contains Components
D-M-E STANDARD MOLD BASE ASSEMBLIES
2 - 6 Mold Base Library
Views of New Representations
This section displays the simple representation of a curve and themaster representations of the new D-M-E assemblies withcomponents.
This drawing displays a simplified representation of a mold base.Each plate is represented by a cross-sectional datum curve.
Figure 2-4Mold Base Simplified Representation (“curve”)
D-M-E STANDARD MOLD BASE ASSEMBLIES
Mold Base Library 2 - 7
This drawing displays a cross-sectional view of the “A” assemblyseries (10x12a_n) with components.
Figure 2-5Mold Base Assembly - “A” Series with Components
D-M-E STANDARD MOLD BASE ASSEMBLIES
2 - 8 Mold Base Library
This drawing displays a cross-sectional view of the “AX” seriesassembly (10x12ax_n) with components.
Figure 2-6Mold Base Assembly - “AX” Series with Components
D-M-E STANDARD MOLD BASE ASSEMBLIES
Mold Base Library 2 - 9
This drawing displays a cross-sectional view of the “B” seriesassembly (10x12b_n) with components.
Figure 2-7Mold Base Assembly - “B” Series with Components
D-M-E STANDARD MOLD BASE ASSEMBLIES
2 - 10 Mold Base Library
This drawing displays a cross-sectional view of the “T” seriesassembly (10x12t_n) with components.
Figure 2-8Mold Base Assembly - “T” Series with Components
D-M-E STANDARD MOLD BASE ASSEMBLIES
Mold Base Library 2 - 11
NAMING CONVENTION
Parts and assemblies in the MOLD BASE LIBRARY are namedaccording to the following convention.
Mold Base Assemblies
For each mold base size, there are four generic mold bases, the Aseries, the AX series, the B series and the T series. Mold bases of eachseries include a “B” plate, ejector retainer plate (ejector bar), ejectorplate, and ejector housing, and some combination of a top plate, “A”plate, “X-1” plate, “X-2” plate, and support plate.
All standard D-M-E mold base assemblies are located in the directoryassy_ds in subdirectories named for the size of the mold base. Forexample, you would find a mold base with the dimensions 7-7/8" by11-7/8" in the subdirectory8x12ds. The mold base has the followingnames for its generic assemblies and assembly instances:
Generic: 8x12a.asm - The generic assembly of the A series8x12ax.asm - The generic assembly of the AX series8x12b.asm - The generic assembly of the B series8x12t.asm - The generic assembly of the T series
Instances: A_812 - The assembly instance of the A seriesAX_812 - The assembly instance of the AX seriesB_812 - The assembly instance of the B series812T-13-17 - An assembly instance of the T series
Note that in the name of the library assembly, the actual size of theassembly was rounded up to use whole numbers. This has been donefor most of the mold bases, because the actual size of the mold basesis often a small fraction less than a whole number.
D-M-E STANDARD MOLD BASE ASSEMBLIES
2 - 12 Mold Base Library
New Mold Base Assemblies
The new mold base assemblies in the D-M-E MOLD BASELIBRARY have the following generic assembly names:
• 10x12a_n.asm• 10x12ax_n.asm• 10x12b_n.asm• 10x12t_n.asm
These assembly files contain not only the plates but also thecomponent parts of each mold base. Note that the names are the sameas those for the basic assemblies, except that “_n” has been added tothe end of the name to indicate the presence of the components in theassembly.
The instance assembly names for the new mold base assemblies are asfollows:
• A_1012_N - The assembly instance of the A series• AX_1012_N - The assembly instance of the AX series• B_1012_N - The assembly instance of the B series• 10X12T_N57-27 - An assembly instance of the T series
All the new D-M-E standard mold base assemblies are also located inthe directoryassy_ds in subdirectories named for the size of the moldbase.
A-Clamping Plates
(B and T series only.) “A”-clamping plates have one (T series) orseven (B series) different values for thickness for each mold base size.Because the T series only has one value for thickness, that thicknessis chosen by default for this plate in a T assembly. For the B series, thefirst part of the instance name shows the mold base size, and thesecond part shows the thickness of the plate. For example, an “A” -clamping plate for a mold base with the dimensions 7-7/8" by 11-7/8"has names of the following form:
Generic: 812at.prtInstances: 812_7at - The thickness is 7/8".
812_13at - The thickness is 1-3/8".812_57at - The thickness is 5-7/8".
D-M-E STANDARD MOLD BASE ASSEMBLIES
Mold Base Library 2 - 13
A Plates
(A and AX series only.)“A” plates have eight or nine different valuesfor thickness for each mold base size. The first part of the instancename shows the mold base size, and the second part shows thethickness of the plate. For example, an “A” plate for a mold base withthe dimensions 7-7/8" by 11-7/8" has names of the following form:
Generic: 812a.prtInstances: 812_7a - The thickness is 7/8".
812_13a - The thickness is 1-3/8".812_57a - The thickness is 5-7/8".
X-1 Plates
(AX and T series only.) “X-1” plates have four or five different valuesfor thickness for each mold base size. Because the T series only hasone value for thickness of this plate, that thickness is chosen by defaultfor a T series assembly. For an AX series assembly, the first part ofthe instance name shows the mold base size, and the second partshows the thickness of the plate. For example, a “X-1” plate for a moldbase with the dimensions 7-7/8" by 11-7/8" has names of thefollowing form:
Generic: 812x-1.prtInstances: 812_7x-1 - The thickness is 7/8".
812_13x-1 - The thickness is 1-3/8".812_57x-1 - The thickness is 5-7/8".
X-2 Plates
(T series only.) “X-2” plates have seven different values for thicknessfor each mold base size. These values are specified in the instancename for the T series assembly. The first part of the instance name isthe mold base size, the second part shows the thickness of the “X-2”plate, and the third part shows the thickness of the “B” plate. An “X-2” plate for a mold base with the dimensions 7-7/8" by 11-7/8" hasseries instance names of the following form:
Generic: 812t.asmInstances: 812T-7-17 - The thickness of the “X-2” plate is 7/8".
812T-13-17 - The thickness of the “X-2” plate is 1-3/8".812T-57-17 - The thickness of the “X-2” plate is 5-7/8".
D-M-E STANDARD MOLD BASE ASSEMBLIES
2 - 14 Mold Base Library
B Plates
(All series.) “B” plates have seven to nine different values forthickness for each mold base size. For the A, AX, and B seriesassemblies, the first part of the instance name shows the mold basesize, and the second part shows the thickness of the plate. Forexample, a “B” plate for a mold base with the dimensions 7-7/8" by11-7/8" has names of the following form:
Generic: 812b.prtInstances: 812_7b - The thickness is 7/8".
812_13b - The thickness is 1-3/8".812_57b - The thickness is 5-7/8".
For the T series, these values are specified in the assembly instancename. The first part of the instance name is the mold base size, thesecond part shows the thickness of the “X-2” plate, and the third partshows the thickness of the “B” plate. A “B” plate for a mold base withthe dimensions 7-7/8" by 11-7/8" has series instance names of thefollowing form:
Generic: 812t.asmInstances: 812T-7-7 - The thickness of the “B” plate is 7/8".
812T-7-13 - The thickness of the “B” plate is 1-3/8".812T-7-57 - The thickness of the “B” plate is 5-7/8"
Ejector Housing Plates
(All series.) Ejector housing plates, called housings in the Pro/Elibrary, have four or five different values for height (dimensionC) foreach mold base size. The first part of the instance name shows themold base size, and the second part shows the height of the housing.For example, a housing for a mold base with the dimensions 7-7/8" by11-7/8" has names of the following form:
Generic: 812house.prtInstances: 812_21c - DimensionC is 2-1/2" (2.5").
812_30c - Dimension C is 3.0".812_31c - DimensionC is 3-1/2" (3.5").
D-M-E STANDARD MOLD BASE ASSEMBLIES
Mold Base Library 2 - 15
Top Plates
(A and AX series only.) Top plates have one (AX series) or two (Aseries) different values for thickness for each mold base size. Becausethe AX series only has one value for thickness, that thickness ischosen by default for this plate in an AX assembly. For the A series,the first part of the instance name shows the mold base size, and thesecond part shows the thickness of the plate. For example, a top platefor a mold base with the dimensions 7-7/8" by 11-7/8" has names ofthe following form:
Generic: 812top.prtInstances: 812top7 - The thickness is 7/8" (.875").
812top13 - The thickness is 1-3/8" (1.375").
Support Plates
(A, AX and T series only.) Support plates have only one value forthickness and are therefore chosen by default. The first part of theinstance name shows the size of the mold base. A support plate for amold base with the dimensions 7-7/8" by 11-7/8" has the name812sup_pl.
Ejector Plates
(All series.) Ejector retainer plates, called ejector plates in the Pro/Elibrary, have only one value for thickness and are therefore chosen bydefault. The first part of the name shows the size of the mold base. Anejector plate for a mold base with the dimensions 7-7/8" by 11-7/8"has the name 812ej_pl.prt.
Ejector Bars
(All series.) Ejector plates, called ejector bars in the Pro/E library,have from one to six different values for length for each size of moldbase. The first part of the instance name shows the size of the moldbase, and the second part shows the length of the ejector bar. Forexample, an ejector bar for a mold base with the dimensions 7-7/8" by11-7/8" has names of the following form:
Generic: 812ej_bar.prtInstances: 812eb12 - The length is 11-7/8" (11.875").
812eb16 - The length is 16".812eb20 - The length is 20".
D-M-E STANDARD MOLD BASE ASSEMBLIES
2 - 16 Mold Base Library
Stop Pin
Generic Part Name: STOP_PIN
To retrieve a mold base assembly, you must also retrieve the stop pin.You can do this in one of two ways:
1. Specify the path to the stop pin in yourconfig.profile.
2. Add the stop pin to your catalog file.
For more information on both of these methods, see the chapter Aboutthe Libraries inIntroduction to the Libraries.
Component Parts
Component parts are named as abbreviated forms of their names in theD-M-E Company’s catalog; instance names correspond exactly to thecatalog numbers. All component parts are located in the directorycomp_ds, in subdirectories named for the types of parts they contain.
°
D-M-E STANDARD MOLD BASE ASSEMBLIES
Mold Base Library 2 - 17
TABLE OF MOLD BASE SIZES
The following tables list the available mold base sizes. Note that allthe dimensions are expressed in inches. Unless otherwise specified inthe previous descriptions, all values are thicknesses.
8x8 (7-7/8x7-7/8)
ComponentSERIES
A AX B T
“A” Plate 7/8 to 5-7/8 7/8 to 5-7/8 N/A N/A
“A” Clamping Plate N/A N/A 1-7/8 to 5-7/8 1-7/8
“B” Plate 7/8 to 5-7/8 7/8 to 5-7/8 7/8 to 5-7/8 7/8 to 3-3/8
Ejector Plate 1 1 1 1
Ejector Retaining Plate 1/2 1/2 1/2 1/2
Ejector Housing 2-1/2 to 4-1/2 2-1/2 to 4-1/2 2-1/2 to 4-1/2 2-1/2 to 4-1/2
Support Plate 1-7/8 1-7/8 N/A 1-7/8
Top Clamping Plate 7/8,1-3/8 7/8 N/A N/A
“X-1” Plate N/A 7/8 to 2-7/8 N/A 7/8
“X-2” Plate N/A N/A N/A 1-3/8 to 4-7/8
Stop Pin 3/16 3/16 3/16 3/16
8x12 (7-7/8x11-7/8)
ComponentSERIES
A AX B T
“A” Plate 7/8 to 5-7/8 7/8 to 5-7/8 N/A N/A
“A” Clamping Plate N/A N/A 1-7/8 to 5-7/8 1-7/8
“B” Plate 7/8 to 5-7/8 7/8 to 5-7/8 7/8 to 5-7/8 7/8 to 3-3/8
Ejector Plate 1 1 1 1
Ejector Retaining Plate 1/2 1/2 1/2 1/2
Ejector Housing 2-1/2 to 4-1/2 2-1/2 to 4-1/2 2-1/2 to 4-1/2 2-1/2 to 4-1/2
Support Plate 1-3/8 1-3/8 N/A 1-3/8
Top Clamping Plate 7/8,1-3/8 7/8 N/A N/A
“X-1” Plate N/A 7/8 to 2-7/8 N/A 7/8
“X-2” Plate N/A N/A N/A 1-3/8 to 4-7/8
Stop Pin 3/16 3/16 3/16 3/16
D-M-E STANDARD MOLD BASE ASSEMBLIES
2 - 18 Mold Base Library
10x8 (9-7/8x8)
ComponentSERIES
A AX B T
“A” Plate 7/8 to 5-7/8 7/8 to 5-7/8 N/A N/A
“A” Clamping Plate N/A N/A 1-7/8 to 5-7/8 1-7/8
“B” Plate 7/8 to 5-7/8 7/8 to 5-7/8 7/8 to 5-7/8 7/8 to 3-3/8
Ejector Plate 1 1 1 1
Ejector Retaining Plate 1/2 1/2 1/2 1/2
Ejector Housing 2-1/2 to 4-1/2 2-1/2 to 4-1/2 2-1/2 to 4-1/2 2-1/2 to 4-1/2
Support Plate 1-7/8 1-7/8 N/A 1-7/8
Top Clamping Plate 7/8,1-3/8 7/8 N/A N/A
“X-1” Plate N/A 7/8 to 2-7/8 N/A 7/8
“X-2” Plate N/A N/A N/A 1-3/8 to 4-7/8
Stop Pin 3/16 3/16 3/16 3/16
10x12 (9-7/8x11-7/8)
ComponentSERIES
A AX B T
“A” Plate 7/8 to 5-7/8 7/8 to 5-7/8 N/A N/A
“A” Clamping Plate N/A N/A 1-7/8 to 5-7/8 1-7/8
“B” Plate 7/8 to 5-7/8 7/8 to 5-7/8 7/8 to 5-7/8 7/8 to 3-3/8
Ejector Plate 1 1 1 1
Ejector Retaining Plate 1/2 1/2 1/2 1/2
Ejector Housing 2-1/2 to 4-1/2 2-1/2 to 4-1/2 2-1/2 to 4-1/2 2-1/2 to 4-1/2
Support Plate 1-7/8 1-7/8 N/A 1-7/8
Top Clamping Plate 7/8,1-3/8 7/8 N/A N/A
“X-1” Plate N/A 7/8 to 2-7/8 N/A 7/8
“X-2” Plate N/A N/A N/A 1-3/8 to 4-7/8
Stop Pin 3/16 3/16 3/16 3/16
D-M-E STANDARD MOLD BASE ASSEMBLIES
Mold Base Library 2 - 19
10x16 (9-7/8x16)
ComponentSERIES
A AX B T
“A” Plate 7/8 to 5-7/8 7/8 to 5-7/8 N/A N/A
“A” Clamping Plate N/A N/A 1-7/8 to 5-7/8 1-7/8
“B” Plate 7/8 to 5-7/8 7/8 to 5-7/8 7/8 to 5-7/8 7/8 to 3-3/8
Ejector Plate 1 1 1 1
Ejector Retaining Plate 1/2 1/2 1/2 1/2
Ejector Housing 2-1/2 to 4-1/2 2-1/2 to 4-1/2 2-1/2 to 4-1/2 2-1/2 to 4-1/2
Support Plate 1-7/8 1-7/8 N/A 1-7/8
Top Clamping Plate 7/8,1-3/8 7/8 N/A N/A
“X-1” Plate N/A 7/8 to 2-7/8 N/A 7/8
“X-2” Plate N/A N/A N/A 1-3/8 to 4-7/8
Stop Pin 3/16 3/16 3/16 3/16
10x20 (9-7/8x20)
ComponentSERIES
A AX B T
“A” Plate 7/8 to 5-7/8 7/8 to 5-7/8 N/A N/A
“A” Clamping Plate N/A N/A 1-7/8 to 5-7/8 1-7/8
“B” Plate 7/8 to 5-7/8 7/8 to 5-7/8 7/8 to 5-7/8 7/8 to 3-3/8
Ejector Plate 1 1 1 1
Ejector Retaining Plate 1/2 1/2 1/2 1/2
Ejector Housing 2-1/2 to 4-1/2 2-1/2 to 4-1/2 2-1/2 to 4-1/2 2-1/2 to 4-1/2
Support Plate 1-7/8 1-7/8 N/A 1-7/8
Top Clamping Plate 7/8,1-3/8 7/8 N/A N/A
“X-1” Plate N/A 7/8 to 2-7/8 N/A 7/8
“X-2” Plate N/A N/A N/A 1-3/8 to 4-7/8
Stop Pin 3/16 3/16 3/16 3/16
D-M-E STANDARD MOLD BASE ASSEMBLIES
2 - 20 Mold Base Library
11x12 (10-7/8x12)
ComponentSERIES
A AX B T
“A” Plate 7/8 to 5-7/8 7/8 to 5-7/8 N/A N/A
“A” Clamping Plate N/A N/A 1-7/8 to 5-7/8 1-7/8
“B” Plate 7/8 to 5-7/8 7/8 to 5-7/8 7/8 to 5-7/8 7/8 to 4-7/8
Ejector Plate 1 1 1 1
Ejector Retaining Plate 1/2 1/2 1/2 1/2
Ejector Housing 2-1/2 to 4-1/2 2-1/2 to 4-1/2 2-1/2 to 4-1/2 2-1/2 to 4-1/2
Support Plate 1-7/8 1-7/8 N/A 1-7/8
Top Clamping Plate 7/8,1-3/8 7/8 N/A N/A
“X-1” Plate N/A 7/8 to 2-7/8 N/A 7/8
“X-2” Plate N/A N/A N/A 1-7/8 to 5-7/8
Stop Pin 3/16 3/16 3/16 3/16
11x14 (10-7/8x14)
ComponentSERIES
A AX B T
“A” Plate 7/8 to 5-7/8 7/8 to 5-7/8 N/A N/A
“A” Clamping Plate N/A N/A 1-7/8 to 5-7/8 1-7/8
“B” Plate 7/8 to 5-7/8 7/8 to 5-7/8 7/8 to 5-7/8 7/8 to 4-7/8
Ejector Plate 1 1 1 1
Ejector Retaining Plate 1/2 1/2 1/2 1/2
Ejector Housing 2-1/2 to 4-1/2 2-1/2 to 4-1/2 2-1/2 to 4-1/2 2-1/2 to 4-1/2
Support Plate 1-7/8 1-7/8 N/A 1-7/8
Top Clamping Plate 7/8,1-3/8 7/8 N/A N/A
“X-1” Plate N/A 7/8 to 2-7/8 N/A 7/8
“X-2” Plate N/A N/A N/A 1-7/8 to 5-7/8
Stop Pin 3/16 3/16 3/16 3/16
D-M-E STANDARD MOLD BASE ASSEMBLIES
Mold Base Library 2 - 21
11x18 (10-7/8x18)
ComponentSERIES
A AX B T
“A” Plate 7/8 to 5-7/8 7/8 to 5-7/8 N/A N/A
“A” Clamping Plate N/A N/A 1-7/8 to 5-7/8 1-7/8
“B” Plate 7/8 to 5-7/8 7/8 to 5-7/8 7/8 to 5-7/8 7/8 to 4-7/8
Ejector Plate 1 1 1 1
Ejector Retaining Plate 1/2 1/2 1/2 1/2
Ejector Housing 2-1/2 to 4-1/2 2-1/2 to 4-1/2 2-1/2 to 4-1/2 2-1/2 to 4-1/2
Support Plate 1-7/8 1-7/8 N/A 1-7/8
Top Clamping Plate 7/8,1-3/8 7/8 N/A N/A
“X-1” Plate N/A 7/8 to 2-7/8 N/A 7/8
“X-2” Plate N/A N/A N/A 1-7/8 to 5-7/8
Stop Pin 3/16 3/16 3/16 3/16
11x23 (10-7/8x23-1/2)
ComponentSERIES
A AX B T
“A” Plate 1-3/8 to 5-7/8 1-3/8 to 5-7/8 N/A N/A
“A” Clamping Plate N/A N/A 1-7/8 to 5-7/8 1-7/8
“B” Plate 1-3/8 to 5-7/8 1-3/8 to 5-7/8 1-3/8 to 5-7/8 1-3/8 to 4-7/8
Ejector Plate 1 1 1 1
Ejector Retaining Plate 1/2 1/2 1/2 1/2
Ejector Housing 3 to 4-1/2 3 to 4-1/2 3 to 4-1/2 3 to 4-1/2
Support Plate 1-7/8 1-7/8 N/A 1-7/8
Top Clamping Plate 7/8,1-3/8 7/8 N/A N/A
“X-1” Plate N/A 7/8 to 2-7/8 N/A 1-3/8
“X-2” Plate N/A N/A N/A 1-7/8 to 5-7/8
Stop Pin 3/16 3/16 3/16 3/16
D-M-E STANDARD MOLD BASE ASSEMBLIES
2 - 22 Mold Base Library
12x12 (11-7/8x12)
ComponentSERIES
A AX B T
“A” Plate 7/8 to 5-7/8 7/8 to 5-7/8 N/A N/A
“A” Clamping Plate N/A N/A 1-7/8 to 5-7/8 1-7/8
“B” Plate 7/8 to 5-7/8 7/8 to 5-7/8 7/8 to 5-7/8 7/8 to 4-7/8
Ejector Plate 1-1/8 1-1/8 1-1/8 1-1/8
Ejector Retaining Plate 1/2 1/2 1/2 1/2
Ejector Housing 3 to 4-1/2 3 to 4-1/2 3 to 4-1/2 3 to 4-1/2
Support Plate 1-7/8 1-7/8 N/A 1-7/8
Top Clamping Plate 7/8,1-3/8 7/8 N/A N/A
“X-1” Plate N/A 7/8 to 2-7/8 N/A 7/8
“X-2” Plate N/A N/A N/A 1-7/8 to 5-7/8
Stop Pin 3/16 3/16 3/16 3/16
12x15 (11-7/8x15)
ComponentSERIES
A AX B T
“A” Plate 7/8 to 5-7/8 7/8 to 5-7/8 N/A N/A
“A” Clamping Plate N/A N/A 1-7/8 to 5-7/8 1-7/8
“B” Plate 7/8 to 5-7/8 7/8 to 5-7/8 7/8 to 5-7/8 7/8 to 4-7/8
Ejector Plate 1-1/8 1-1/8 1-1/8 1-1/8
Ejector Retaining Plate 1/2 1/2 1/2 1/2
Ejector Housing 3 to 4-1/2 3 to 4-1/2 3 to 4-1/2 3 to 4-1/2
Support Plate 1-7/8 1-7/8 N/A 1-7/8
Top Clamping Plate 7/8,1-3/8 7/8 N/A N/A
“X-1” Plate N/A 7/8 to 2-7/8 N/A 7/8
“X-2” Plate N/A N/A N/A 1-7/8 to 5-7/8
Stop Pin 3/16 3/16 3/16 3/16
D-M-E STANDARD MOLD BASE ASSEMBLIES
Mold Base Library 2 - 23
12x20 (11-7/8x20)
ComponentSERIES
A AX B T
“A” Plate 7/8 to 5-7/8 7/8 to 5-7/8 N/A N/A
“A” Clamping Plate N/A N/A 1-7/8 to 5-7/8 1-7/8
“B” Plate 7/8 to 5-7/8 7/8 to 5-7/8 7/8 to 5-7/8 7/8 to 4-7/8
Ejector Plate 1-1/8 1-1/8 1-1/8 1-1/8
Ejector Retaining Plate 1/2 1/2 1/2 1/2
Ejector Housing 3 to 4-1/2 3 to 4-1/2 3 to 4-1/2 3 to 4-1/2
Support Plate 1-7/8 1-7/8 N/A 1-7/8
Top Clamping Plate 7/8,1-3/8 7/8 N/A N/A
“X-1” Plate N/A 7/8 to 2-7/8 N/A 7/8
“X-2” Plate N/A N/A N/A 1-7/8 to 5-7/8
Stop Pin 3/16 3/16 3/16 3/16
12x23 (11-7/8x23-1/2)
ComponentSERIES
A AX B T
“A” Plate 1-3/8 to 5-7/8 1-3/8 to 5-7/8 N/A N/A
“A” Clamping Plate N/A N/A 1-7/8 to 5-7/8 1-7/8
“B” Plate 1-3/8 to 5-7/8 1-3/8 to 5-7/8 1-3/8 to 5-7/8 1-3/8 to 4-7/8
Ejector Plate 1-1/8 1-1/8 1-1/8 1-1/8
Ejector Retaining Plate 1/2 1/2 1/2 1/2
Ejector Housing 3 to 4-1/2 3 to 4-1/2 3 to 4-1/2 3 to 4-1/2
Support Plate 1-7/8 1-7/8 N/A 1-7/8
Top Clamping Plate 7/8,1-3/8 7/8 N/A N/A
“X-1” Plate N/A 7/8 to 2-7/8 N/A 1-3/8
“X-2” Plate N/A N/A N/A 1-7/8 to 5-7/8
Stop Pin 3/16 3/16 3/16 3/16
D-M-E STANDARD MOLD BASE ASSEMBLIES
2 - 24 Mold Base Library
13x15 (13-3/8x15)
ComponentSERIES
A AX B T
“A” Plate 7/8 to 5-7/8 7/8 to 5-7/8 N/A N/A
“A” Clamping Plate N/A N/A 1-7/8 to 5-7/8 1-7/8
“B” Plate 7/8 to 5-7/8 7/8 to 5-7/8 7/8 to 5-7/8 7/8 to 4-7/8
Ejector Plate 1-1/8 1-1/8 1-1/8 1-1/8
Ejector Retaining Plate 5/8 5/8 5/8 5/8
Ejector Housing 3 to 4-1/2 3 to 4-1/2 3 to 4-1/2 3 to 4-1/2
Support Plate 1-7/8 1-7/8 N/A 1-7/8
Top Clamping Plate 1-3/8 1-3/8 N/A N/A
“X-1” Plate N/A 7/8 to 2-7/8 N/A 7/8
“X-2” Plate N/A N/A N/A 1-7/8 to 5-7/8
Stop Pin 3/16 3/16 3/16 3/16
13x18 (13-3/8x18)
ComponentSERIES
A AX B T
“A” Plate 7/8 to 5-7/8 7/8 to 5-7/8 N/A N/A
“A” Clamping Plate N/A N/A 1-7/8 to 5-7/8 1-7/8
“B” Plate 7/8 to 5-7/8 7/8 to 5-7/8 7/8 to 5-7/8 7/8 to 4-7/8
Ejector Plate 1-1/8 1-1/8 1-1/8 1-1/8
Ejector Retaining Plate 5/8 5/8 5/8 5/8
Ejector Housing 3 to 4-1/2 3 to 4-1/2 3 to 4-1/2 3 to 4-1/2
Support Plate 1-7/8 1-7/8 N/A 1-7/8
Top Clamping Plate 1-3/8 1-3/8 N/A N/A
“X-1” Plate N/A 7/8 to 2-7/8 N/A 7/8
“X-2” Plate N/A N/A N/A 1-7/8 to 5-7/8
Stop Pin 3/16 3/16 3/16 3/16
D-M-E STANDARD MOLD BASE ASSEMBLIES
Mold Base Library 2 - 25
13x21 (13-3/8x20-3/4)
ComponentSERIES
A AX B T
“A” Plate 7/8 to 5-7/8 7/8 to 5-7/8 N/A N/A
“A” Clamping Plate N/A N/A 1-7/8 to 5-7/8 1-7/8
“B” Plate 7/8 to 5-7/8 7/8 to 5-7/8 7/8 to 5-7/8 7/8 to 4-7/8
Ejector Plate 1-1/8 1-1/8 1-1/8 1-1/8
Ejector Retaining Plate 5/8 5/8 5/8 5/8
Ejector Housing 3 to 4-1/2 3 to 4-1/2 3 to 4-1/2 3 to 4-1/2
Support Plate 1-7/8 1-7/8 N/A 1-7/8
Top Clamping Plate 1-3/8 1-3/8 N/A N/A
“X-1” Plate N/A 7/8 to 2-7/8 N/A 7/8
“X-2” Plate N/A N/A N/A 1-7/8 to 5-7/8
Stop Pin 3/16 3/16 3/16 3/16
13x23 (13-3/8x23-1/2)
ComponentSERIES
A AX B T
“A” Plate 1-3/8 to 5-7/8 1-3/8 to 5-7/8 N/A N/A
“A” Clamping Plate N/A N/A 1-7/8 to 5-7/8 1-7/8
“B” Plate 1-3/8 to 5-7/8 1-3/8 to 5-7/8 1-3/8 to 5-7/8 1-3/8 to 4-7/8
Ejector Plate 1-1/8 1-1/8 1-1/8 1-1/8
Ejector Retaining Plate 5/8 5/8 5/8 5/8
Ejector Housing 3 to 4-1/2 3 to 4-1/2 3 to 4-1/2 3 to 4-1/2
Support Plate 1-7/8 1-7/8 N/A 1-7/8
Top Clamping Plate 1-3/8 1-3/8 N/A N/A
“X-1” Plate N/A 7/8 to 2-7/8 N/A 1-3/8
“X-2” Plate N/A N/A N/A 1-7/8 to 5-7/8
Stop Pin 3/16 3/16 3/16 3/16
D-M-E STANDARD MOLD BASE ASSEMBLIES
2 - 26 Mold Base Library
13x26 (13-3/8x26)
ComponentSERIES
A AX B T
“A” Plate 1-3/8 to 5-7/8 1-3/8 to 5-7/8 N/A N/A
“A” Clamping Plate N/A N/A 1-7/8 to 5-7/8 1-7/8
“B” Plate 1-3/8 to 5-7/8 1-3/8 to 5-7/8 1-3/8 to 5-7/8 1-3/8 to 4-7/8
Ejector Plate 1-1/8 1-1/8 1-1/8 1-1/8
Ejector Retaining Plate 5/8 5/8 5/8 5/8
Ejector Housing 3 to 4-1/2 3 to 4-1/2 3 to 4-1/2 3 to 4-1/2
Support Plate 1-7/8 1-7/8 N/A 1-7/8
Top Clamping Plate 1-3/8 1-3/8 N/A N/A
“X-1” Plate N/A 7/8 to 2-7/8 N/A 1-3/8
“X-2” Plate N/A N/A N/A 1-7/8 to 5-7/8
Stop Pin 3/16 3/16 3/16 3/16
13x29 (13-3/8x29-1/2)
ComponentSERIES
A AX B T
“A” Plate 1-3/8 to 5-7/8 1-3/8 to 5-7/8 N/A N/A
“A” Clamping Plate N/A N/A 1-7/8 to 5-7/8 1-7/8
“B” Plate 1-3/8 to 5-7/8 1-3/8 to 5-7/8 1-3/8 to 5-7/8 1-3/8 to 4-7/8
Ejector Plate 1-1/8 1-1/8 1-1/8 1-1/8
Ejector Retaining Plate 5/8 5/8 5/8 5/8
Ejector Housing 3 to 4-1/2 3 to 4-1/2 3 to 4-1/2 3 to 4-1/2
Support Plate 1-7/8 1-7/8 N/A 1-7/8
Top Clamping Plate 1-3/8 1-3/8 N/A N/A
“X-1” Plate N/A 7/8 to 2-7/8 N/A 1-3/8
“X-2” Plate N/A N/A N/A 1-7/8 to 5-7/8
Stop Pin 3/16 3/16 3/16 3/16
D-M-E STANDARD MOLD BASE ASSEMBLIES
Mold Base Library 2 - 27
15x18 (14-7/8x17-7/8)
ComponentSERIES
A AX B T
“A” Plate 7/8 to 5-7/8 7/8 to 5-7/8 N/A N/A
“A” Clamping Plate N/A N/A 1-7/8 to 5-7/8 1-7/8
“B” Plate 7/8 to 5-7/8 7/8 to 5-7/8 7/8 to 5-7/8 1-3/8 to 4-7/8
Ejector Plate 1-1/8 1-1/8 1-1/8 1-1/8
Ejector Retaining Plate 5/8 5/8 5/8 5/8
Ejector Housing 3 to 4-1/2 3 to 4-1/2 3 to 4-1/2 3 to 4-1/2
Support Plate 2-3/8 2-3/8 N/A 2-3/8
Top Clamping Plate 1-3/8 1-3/8 N/A N/A
“X-1” Plate N/A 7/8 to 2-7/8 N/A 7/8
“X-2” Plate N/A N/A N/A 1-7/8 to 5-7/8
Stop Pin 3/16 3/16 3/16 3/16
15x24 (14-7/8x23-3/4)
ComponentSERIES
A AX B T
“A” Plate 1-3/8 to 5-7/8 1-3/8 to 5-7/8 N/A N/A
“A” Clamping Plate N/A N/A 1-7/8 to 5-7/8 1-7/8
“B” Plate 1-3/8 to 5-7/8 1-3/8 to 5-7/8 1-3/8 to 5-7/8 1-3/8 to 4-7/8
Ejector Plate 1-1/8 1-1/8 1-1/8 1-1/8
Ejector Retaining Plate 5/8 5/8 5/8 5/8
Ejector Housing 3 to 4-1/2 3 to 4-1/2 3 to 4-1/2 3 to 4-1/2
Support Plate 2-3/8 2-3/8 N/A 2-3/8
Top Clamping Plate 1-3/8 1-3/8 N/A N/A
“X-1” Plate N/A 7/8 to 2-7/8 N/A 1-3/8
“X-2” Plate N/A N/A N/A 1-7/8 to 5-7/8
Stop Pin 3/16 3/16 3/16 3/16
D-M-E STANDARD MOLD BASE ASSEMBLIES
2 - 28 Mold Base Library
15x29 (14-7/8x29-1/2)
ComponentSERIES
A AX B T
“A” Plate 1-3/8 to 5-7/8 1-3/8 to 5-7/8 N/A N/A
“A” Clamping Plate N/A N/A 1-7/8 to 5-7/8 1-7/8
“B” Plate 1-3/8 to 5-7/8 1-3/8 to 5-7/8 1-3/8 to 5-7/8 1-3/8 to 4-7/8
Ejector Plate 1-1/8 1-1/8 1-1/8 1-1/8
Ejector Retaining Plate 5/8 5/8 5/8 5/8
Ejector Housing 3 to 4-1/2 3 to 4-1/2 3 to 4-1/2 3 to 4-1/2
Support Plate 2-3/8 2-3/8 N/A 2-3/8
Top Clamping Plate 1-3/8 1-3/8 N/A N/A
“X-1” Plate N/A 7/8 to 2-7/8 N/A 1-3/8
“X-2” Plate N/A N/A N/A 1-7/8 to 5-7/8
Stop Pin 3/16 3/16 3/16 3/16
16x16 (15-7/8x16)
ComponentSERIES
A AX B T
“A” Plate 7/8 to 5-7/8 7/8 to 5-7/8 N/A N/A
“A” Clamping Plate N/A N/A 1-7/8 to 5-7/8 1-7/8
“B” Plate 7/8 to 5-7/8 7/8 to 5-7/8 7/8 to 5-7/8 1-3/8 to 4-7/8
Ejector Plate 1-1/8 1-1/8 1-1/8 1-1/8
Ejector Retaining Plate 5/8 5/8 5/8 5/8
Ejector Housing 3 to 4-1/2 3 to 4-1/2 3 to 4-1/2 3 to 4-1/2
Support Plate 2-3/8 2-3/8 N/A 2-3/8
Top Clamping Plate 1-3/8 1-3/8 N/A N/A
“X-1” Plate N/A 7/8 to 2-7/8 N/A 7/8
“X-2” Plate N/A N/A N/A 1-7/8 to 5-7/8
Stop Pin 3/16 3/16 3/16 3/16
D-M-E STANDARD MOLD BASE ASSEMBLIES
Mold Base Library 2 - 29
16x20 (15-7/8x20)
ComponentSERIES
A AX B T
“A” Plate 7/8 to 5-7/8 7/8 to 5-7/8 N/A N/A
“A” Clamping Plate N/A N/A 1-7/8 to 5-7/8 1-7/8
“B” Plate 7/8 to 5-7/8 7/8 to 5-7/8 7/8 to 5-7/8 1-3/8 to 4-7/8
Ejector Plate 1-1/8 1-1/8 1-1/8 1-1/8
Ejector Retaining Plate 5/8 5/8 5/8 5/8
Ejector Housing 3 to 4-1/2 3 to 4-1/2 3 to 4-1/2 3 to 4-1/2
Support Plate 2-3/8 2-3/8 N/A 2-3/8
Top Clamping Plate 1-3/8 1-3/8 N/A N/A
“X-1” Plate N/A 7/8 to 2-7/8 N/A 7/8
“X-2” Plate N/A N/A N/A 1-7/8 to 5-7/8
Stop Pin 3/16 3/16 3/16 3/16
16x23 (15-7/8x23-1/2)
ComponentSERIES
A AX B T
“A” Plate 1-3/8 to 5-7/8 1-3/8 to 5-7/8 N/A N/A
“A” Clamping Plate N/A N/A 1-7/8 to 5-7/8 1-7/8
“B” Plate 1-3/8 to 5-7/8 1-3/8 to 5-7/8 1-3/8 to 5-7/8 1-3/8 to 4-7/8
Ejector Plate 1-1/8 1-1/8 1-1/8 1-1/8
Ejector Retaining Plate 5/8 5/8 5/8 5/8
Ejector Housing 3 to 4-1/2 3 to 4-1/2 3 to 4-1/2 3 to 4-1/2
Support Plate 2-3/8 2-3/8 N/A 2-3/8
Top Clamping Plate 1-3/8 1-3/8 N/A N/A
“X-1” Plate N/A 7/8 to 2-7/8 N/A 1-3/8
“X-2” Plate N/A N/A N/A 1-7/8 to 5-7/8
Stop Pin 3/16 3/16 3/16 3/16
D-M-E STANDARD MOLD BASE ASSEMBLIES
2 - 30 Mold Base Library
16x26 (15-7/8x26)
ComponentSERIES
A AX B T
“A” Plate 1-3/8 to 5-7/8 1-3/8 to 5-7/8 N/A N/A
“A” Clamping Plate N/A N/A 1-7/8 to 5-7/8 1-7/8
“B” Plate 1-3/8 to 5-7/8 1-3/8 to 5-7/8 1-3/8 to 5-7/8 1-3/8 to 4-7/8
Ejector Plate 1-1/8 1-1/8 1-1/8 1-1/8
Ejector Retaining Plate 5/8 5/8 5/8 5/8
Ejector Housing 3 to 4-1/2 3 to 4-1/2 3 to 4-1/2 3 to 4-1/2
Support Plate 2-3/8 2-3/8 N/A 2-3/8
Top Clamping Plate 1-3/8 1-3/8 N/A N/A
“X-1” Plate N/A 7/8 to 2-7/8 N/A 1-3/8
“X-2” Plate N/A N/A N/A 1-7/8 to 5-7/8
Stop Pin 3/16 3/16 3/16 3/16
16x29 (15-7/8x29-1/2)
ComponentSERIES
A AX B T
“A” Plate 1-3/8 to 5-7/8 1-3/8 to 5-7/8 N/A N/A
“A” Clamping Plate N/A N/A 1-7/8 to 5-7/8 1-7/8
“B” Plate 1-3/8 to 5-7/8 1-3/8 to 5-7/8 1-3/8 to 5-7/8 1-3/8 to 4-7/8
Ejector Plate 1-1/8 1-1/8 1-1/8 1-1/8
Ejector Retaining Plate 5/8 5/8 5/8 5/8
Ejector Housing 3 to 4-1/2 3 to 4-1/2 3 to 4-1/2 3 to 4-1/2
Support Plate 2-3/8 2-3/8 N/A 2-3/8
Top Clamping Plate 1-3/8 1-3/8 N/A N/A
“X-1” Plate N/A 7/8 to 2-7/8 N/A 1-3/8
“X-2” Plate N/A N/A N/A 1-7/8 to 5-7/8
Stop Pin 3/16 3/16 3/16 3/16
D-M-E STANDARD MOLD BASE ASSEMBLIES
Mold Base Library 2 - 31
16x35 (15-7/8x35-1/2)
ComponentSERIES
A AX B T
“A” Plate 1-3/8 to 5-7/8 1-3/8 to 5-7/8 N/A N/A
“A” Clamping Plate N/A N/A 1-7/8 to 5-7/8 1-7/8
“B” Plate 1-3/8 to 5-7/8 1-3/8 to 5-7/8 1-3/8 to 5-7/8 1-3/8 to 4-7/8
Ejector Plate 1-1/8 1-1/8 1-1/8 1-1/8
Ejector Retaining Plate 5/8 5/8 5/8 5/8
Ejector Housing 3 to 4-1/2 3 to 4-1/2 3 to 4-1/2 3 to 4-1/2
Support Plate 2-3/8 2-3/8 N/A 2-3/8
Top Clamping Plate 1-3/8 1-3/8 N/A N/A
“X-1” Plate N/A 7/8 to 2-7/8 N/A 1-3/8
“X-2” Plate N/A N/A N/A 1-7/8 to 5-7/8
Stop Pin 3/16 3/16 3/16 3/16
17x24 (16-1/2x23-3/4)
ComponentSERIES
A AX B T
“A” Plate 1-3/8 to 5-7/8 1-3/8 to 5-7/8 N/A N/A
“A” Clamping Plate N/A N/A 1-7/8 to 5-7/8 1-7/8
“B” Plate 1-3/8 to 5-7/8 1-3/8 to 5-7/8 1-3/8 to 5-7/8 1-3/8 to 4-7/8
Ejector Plate 1-1/8 1-1/8 1-1/8 1-1/8
Ejector Retaining Plate 5/8 5/8 5/8 5/8
Ejector Housing 3 to 4-1/2 3 to 4-1/2 3 to 4-1/2 3 to 4-1/2
Support Plate 2-3/8 2-3/8 N/A 2-3/8
Top Clamping Plate 1-3/8 1-3/8 N/A N/A
“X-1” Plate N/A 7/8 to 2-7/8 N/A 1-3/8
“X-2” Plate N/A N/A N/A 1-7/8 to 5-7/8
Stop Pin 3/16 3/16 3/16 3/16
D-M-E STANDARD MOLD BASE ASSEMBLIES
2 - 32 Mold Base Library
17x29 (16-1/2x29-1/2)
ComponentSERIES
A AX B T
“A” Plate 1-3/8 to 5-7/8 1-3/8 to 5-7/8 N/A N/A
“A” Clamping Plate N/A N/A 1-7/8 to 5-7/8 1-7/8
“B” Plate 1-3/8 to 5-7/8 1-3/8 to 5-7/8 1-3/8 to 5-7/8 1-3/8 to 4-7/8
Ejector Plate 1-1/8 1-1/8 1-1/8 1-1/8
Ejector Retaining Plate 5/8 5/8 5/8 5/8
Ejector Housing 3 to 4-1/2 3 to 4-1/2 3 to 4-1/2 3 to 4-1/2
Support Plate 2-3/8 2-3/8 N/A 2-3/8
Top Clamping Plate 1-3/8 1-3/8 N/A N/A
“X-1” Plate N/A 7/8 to 2-7/8 N/A 1-3/8
“X-2” Plate N/A N/A N/A 1-7/8 to 5-7/8
Stop Pin 3/16 3/16 3/16 3/16
18x18 (17-7/8x18)
ComponentSERIES
A AX B T
“A” Plate 1-3/8 to 5-7/8 1-3/8 to 5-7/8 N/A N/A
“A” Clamping Plate N/A N/A 1-7/8 to 5-7/8 1-7/8
“B” Plate 1-3/8 to 5-7/8 1-3/8 to 5-7/8 1-3/8 to 5-7/8 1-3/8 to 4-7/8
Ejector Plate 1-1/8 1-1/8 1-1/8 1-1/8
Ejector Retaining Plate 5/8 5/8 5/8 5/8
Ejector Housing 3 to 4-1/2 3 to 4-1/2 3 to 4-1/2 3 to 4-1/2
Support Plate 2-3/8 2-3/8 N/A 2-3/8
Top Clamping Plate 1-3/8 1-3/8 N/A N/A
“X-1” Plate N/A 7/8 to 2-7/8 N/A 1-3/8
“X-2” Plate N/A N/A N/A 1-7/8 to 5-7/8
Stop Pin 3/16 3/16 3/16 3/16
D-M-E STANDARD MOLD BASE ASSEMBLIES
Mold Base Library 2 - 33
18x20 (17-7/8x20)
ComponentSERIES
A AX B T
“A” Plate 1-3/8 to 5-7/8 1-3/8 to 5-7/8 N/A N/A
“A” Clamping Plate N/A N/A 1-7/8 to 5-7/8 1-7/8
“B” Plate 1-3/8 to 5-7/8 1-3/8 to 5-7/8 1-3/8 to 5-7/8 1-3/8 to 4-7/8
Ejector Plate 1-1/8 1-1/8 1-1/8 1-1/8
Ejector Retaining Plate 5/8 5/8 5/8 5/8
Ejector Housing 3 to 4-1/2 3 to 4-1/2 3 to 4-1/2 3 to 4-1/2
Support Plate 2-3/8 2-3/8 N/A 2-3/8
Top Clamping Plate 1-3/8 1-3/8 N/A N/A
“X-1” Plate N/A 7/8 to 2-7/8 N/A 1-3/8
“X-2” Plate N/A N/A N/A 1-7/8 to 5-7/8
Stop Pin 3/16 3/16 3/16 3/16
18x23 (17-7/8x23-1/2)
ComponentSERIES
A AX B T
“A” Plate 1-3/8 to 5-7/8 1-3/8 to 5-7/8 N/A N/A
“A” Clamping Plate N/A N/A 1-7/8 to 5-7/8 1-7/8
“B” Plate 1-3/8 to 5-7/8 1-3/8 to 5-7/8 1-3/8 to 5-7/8 1-3/8 to 4-7/8
Ejector Plate 1-1/8 1-1/8 1-1/8 1-1/8
Ejector Retaining Plate 5/8 5/8 5/8 5/8
Ejector Housing 3 to 4-1/2 3 to 4-1/2 3 to 4-1/2 3 to 4-1/2
Support Plate 2-3/8 2-3/8 N/A 2-3/8
Top Clamping Plate 1-3/8 1-3/8 N/A N/A
“X-1” Plate N/A 7/8 to 2-7/8 N/A 1-3/8
“X-2” Plate N/A N/A N/A 1-7/8 to 5-7/8
Stop Pin 3/16 3/16 3/16 3/16
D-M-E STANDARD MOLD BASE ASSEMBLIES
2 - 34 Mold Base Library
18x26 (17-7/8x26)
ComponentSERIES
A AX B T
“A” Plate 1-3/8 to 5-7/8 1-3/8 to 5-7/8 N/A N/A
“A” Clamping Plate N/A N/A 1-7/8 to 5-7/8 1-7/8
“B” Plate 1-3/8 to 5-7/8 1-3/8 to 5-7/8 1-3/8 to 5-7/8 1-3/8 to 4-7/8
Ejector Plate 1-1/8 1-1/8 1-1/8 1-1/8
Ejector Retaining Plate 5/8 5/8 5/8 5/8
Ejector Housing 3 to 4-1/2 3 to 4-1/2 3 to 4-1/2 3 to 4-1/2
Support Plate 2-3/8 2-3/8 N/A 2-3/8
Top Clamping Plate 1-3/8 1-3/8 N/A N/A
“X-1” Plate N/A 7/8 to 2-7/8 N/A 1-3/8
“X-2” Plate N/A N/A N/A 1-7/8 to 5-7/8
Stop Pin 3/16 3/16 3/16 3/16
18x29 (17-7/8x29)
ComponentSERIES
A AX B T
“A” Plate 1-3/8 to 5-7/8 1-3/8 to 5-7/8 N/A N/A
“A” Clamping Plate N/A N/A 1-7/8 to 5-7/8 1-7/8
“B” Plate 1-3/8 to 5-7/8 1-3/8 to 5-7/8 1-3/8 to 5-7/8 1-3/8 to 4-7/8
Ejector Plate 1-1/8 1-1/8 1-1/8 1-1/8
Ejector Retaining Plate 5/8 5/8 5/8 5/8
Ejector Housing 3 to 4-1/2 3 to 4-1/2 3 to 4-1/2 3 to 4-1/2
Support Plate 2-3/8 2-3/8 N/A 2-3/8
Top Clamping Plate 1-3/8 1-3/8 N/A N/A
“X-1” Plate N/A 7/8 to 2-7/8 N/A 1-3/8
“X-2” Plate N/A N/A N/A 1-7/8 to 5-7/8
Stop Pin 3/16 3/16 3/16 3/16
D-M-E STANDARD MOLD BASE ASSEMBLIES
Mold Base Library 2 - 35
18x35 (17-7/8x35-1/2)
ComponentSERIES
A AX B T
“A” Plate 1-3/8 to 5-7/8 1-3/8 to 5-7/8 N/A N/A
“A” Clamping Plate N/A N/A 1-7/8 to 5-7/8 1-7/8
“B” Plate 1-3/8 to 5-7/8 1-3/8 to 5-7/8 1-3/8 to 5-7/8 1-3/8 to 4-7/8
Ejector Plate 1-1/8 1-1/8 1-1/8 1-1/8
Ejector Retaining Plate 5/8 5/8 5/8 5/8
Ejector Housing 3 to 4-1/2 3 to 4-1/2 3 to 4-1/2 3 to 4-1/2
Support Plate 2-3/8 2-3/8 N/A 2-3/8
Top Clamping Plate 1-3/8 1-3/8 N/A N/A
“X-1” Plate N/A 7/8 to 2-7/8 N/A 1-3/8
“X-2” Plate N/A N/A N/A 1-7/8 to 5-7/8
Stop Pin 3/16 3/16 3/16 3/16
19x24 (19-1/2x23-3/4)
ComponentSERIES
A AX B T
“A” Plate 1-3/8 to 5-7/8 1-3/8 to 5-7/8 N/A N/A
“A” Clamping Plate N/A N/A 1-7/8 to 5-7/8 1-7/8
“B” Plate 1-3/8 to 5-7/8 1-3/8 to 5-7/8 1-3/8 to 5-7/8 1-3/8 to 4-7/8
Ejector Plate 1-1/8 1-1/8 1-1/8 1-1/8
Ejector Retaining Plate 5/8 5/8 5/8 5/8
Ejector Housing 3 to 4-1/2 3 to 4-1/2 3 to 4-1/2 3 to 4-1/2
Support Plate 2-3/8 2-3/8 N/A 2-3/8
Top Clamping Plate 1-3/8 1-3/8 N/A N/A
“X-1” Plate N/A 7/8 to 2-7/8 N/A 1-3/8
“X-2” Plate N/A N/A N/A 1-7/8 to 5-7/8
Stop Pin 3/16 3/16 3/16 3/16
D-M-E STANDARD MOLD BASE ASSEMBLIES
2 - 36 Mold Base Library
19x29 (19-1/2x29-1/2)
ComponentSERIES
A AX B T
“A” Plate 1-3/8 to 5-7/8 1-3/8 to 5-7/8 N/A N/A
“A” Clamping Plate N/A N/A 1-7/8 to 5-7/8 1-7/8
“B” Plate 1-3/8 to 5-7/8 1-3/8 to 5-7/8 1-3/8 to 5-7/8 1-3/8 to 4-7/8
Ejector Plate 1-1/8 1-1/8 1-1/8 1-1/8
Ejector Retaining Plate 5/8 5/8 5/8 5/8
Ejector Housing 3 to 4-1/2 3 to 4-1/2 3 to 4-1/2 3 to 4-1/2
Support Plate 2-3/8 2-3/8 N/A 2-3/8
Top Clamping Plate 1-3/8 1-3/8 N/A N/A
“X-1” Plate N/A 7/8 to 2-7/8 N/A 1-3/8
“X-2” Plate N/A N/A N/A 1-7/8 to 5-7/8
Stop Pin 3/16 3/16 3/16 3/16
19x35 (19-1/2x35-1/2)
ComponentSERIES
A AX B T
“A” Plate 1-3/8 to 5-7/8 1-3/8 to 5-7/8 N/A N/A
“A” Clamping Plate N/A N/A 1-7/8 to 5-7/8 1-7/8
“B” Plate 1-3/8 to 5-7/8 1-3/8 to 5-7/8 1-3/8 to 5-7/8 1-3/8 to 4-7/8
Ejector Plate 1-1/8 1-1/8 1-1/8 1-1/8
Ejector Retaining Plate 5/8 5/8 5/8 5/8
Ejector Housing 3 to 4-1/2 3 to 4-1/2 3 to 4-1/2 3 to 4-1/2
Support Plate 2-3/8 2-3/8 N/A 2-3/8
Top Clamping Plate 1-3/8 1-3/8 N/A N/A
“X-1” Plate N/A 7/8 to 2-7/8 N/A 1-3/8
“X-2” Plate N/A N/A N/A 1-7/8 to 5-7/8
Stop Pin 3/16 3/16 3/16 3/16
D-M-E STANDARD MOLD BASE ASSEMBLIES
Mold Base Library 2 - 37
24x24 (23-3/4x23-3/4)
ComponentSERIES
A AX B T
“A” Plate 1-3/8 to 5-7/8 1-3/8 to 5-7/8 N/A N/A
“A” Clamping Plate N/A N/A 1-7/8 to 5-7/8 2-3/8
“B” Plate 1-3/8 to 5-7/8 1-3/8 to 5-7/8 1-3/8 to 5-7/8 1-3/8 to 4-7/8
Ejector Plate 1-1/8 1-1/8 1-1/8 1-1/8
Ejector Retaining Plate 5/8 5/8 5/8 5/8
Ejector Housing 3 to 4-1/2 3 to 4-1/2 3 to 4-1/2 3 to 4-1/2
Support Plate 2-3/8 2-3/8 N/A 2-3/8
Top Clamping Plate 1-3/8 1-3/8 N/A N/A
“X-1” Plate N/A 7/8 to 2-7/8 N/A 1-3/8
“X-2” Plate N/A N/A N/A 1-7/8 to 5-7/8
Stop Pin 3/16 3/16 3/16 3/16
24x29 (23-3/4x29-1/2)
ComponentSERIES
A AX B T
“A” Plate 1-3/8 to 5-7/8 1-3/8 to 5-7/8 N/A N/A
“A” Clamping Plate N/A N/A 1-7/8 to 5-7/8 2-3/8
“B” Plate 1-3/8 to 5-7/8 1-3/8 to 5-7/8 1-3/8 to 5-7/8 1-3/8 to 4-7/8
Ejector Plate 1-1/8 1-1/8 1-1/8 1-1/8
Ejector Retaining Plate 5/8 5/8 5/8 5/8
Ejector Housing 3 to 4-1/2 3 to 4-1/2 3 to 4-1/2 3 to 4-1/2
Support Plate 2-3/8 2-3/8 N/A 2-3/8
Top Clamping Plate 1-3/8 1-3/8 N/A N/A
“X-1” Plate N/A 7/8 to 2-7/8 N/A 1-3/8
“X-2” Plate N/A N/A N/A 1-7/8 to 5-7/8
Stop Pin 3/16 3/16 3/16 3/16
D-M-E STANDARD MOLD BASE ASSEMBLIES
2 - 38 Mold Base Library
24x35 (23-3/4x35-1/2)
ComponentSERIES
A AX B T
“A” Plate 1-3/8 to 5-7/8 1-3/8 to 5-7/8 N/A N/A
“A” Clamping Plate N/A N/A 1-7/8 to 5-7/8 2-3/8
“B” Plate 1-3/8 to 5-7/8 1-3/8 to 5-7/8 1-3/8 to 5-7/8 1-3/8 to 4-7/8
Ejector Plate 1-1/8 1-1/8 1-1/8 1-1/8
Ejector Retaining Plate 5/8 5/8 5/8 5/8
Ejector Housing 3 to 4-1/2 3 to 4-1/2 3 to 4-1/2 3 to 4-1/2
Support Plate 2-3/8 2-3/8 N/A 2-3/8
Top Clamping Plate 1-3/8 1-3/8 N/A N/A
“X-1” Plate N/A 7/8 to 2-7/8 N/A 1-3/8
“X-2” Plate N/A N/A N/A 1-7/8 to 5-7/8
Stop Pin 3/16 3/16 3/16 3/16
Mold Base Library 3 - 1
D-M-E BUSHINGS AND DOWELS
SHOULDER AND STRAIGHT BUSHING WITH NOMINAL I.D. FROM 3/4TO 1-1/2 INCHES
Generic Part Name: SD_BUSH
InstanceName
NOMINALINTERIORDIAMETER
GInterior
Diameter
HOutside
DiameterD
LLength
5700 to 5709 3/4 0.7505 1.1255 1.302 0.875 to 5.875
5710 to 5720 7/8 0.8755 1.2505 1.427 0.875 to 5.875
5730 to 5740 1 1.0005 1.3755 1.552 0.875 to 5.875
5750 to 5760 1-1/4 1.2505 1.6255 1.802 0.875 to 5.875
5770 to 5780 1-1/2 1.5005 2.0005 2.177 0.875 to 5.875
9
D-M-E BUSHINGS AND DOWELS
3 - 2 Mold Base Library
SHOULDER BUSHING WITH NOMINAL I.D. FROM TO 2 TO 3 INCHES
Generic Part Name: SD_BUSH_L
InstanceName
NOMINALINTERIORDIAMETER
GInterior
Diameter
HOutside
DiameterD
LLength
5901 to 5910 2 2.0005 2.5005 2.677 1.375 to 5.875
5951 to 5960 2-1/2 2.5005 3.2505 3.427 1.375 to 5.875
5976 to 5984 3 3.0005 3.7505 3.990 3.875 to 7.875
D-M-E BUSHINGS AND DOWELS
Mold Base Library 3 - 3
STRAIGHT BUSHING WITH NOMINAL I.D. FROM 3/4 TO 3 INCHES
Generic Part Name: STR_BUSH
InstanceName
NOMINALINTERIORDIAMETER
GInterior
Diameter
LLength
HOutside
Diameter
5500 3/4 0.7505 0.8750 1.1255
5501 3/4 0.7505 1.3750 1.1255
5502 7/8 0.8755 1.3750 1.2505
5503 1 1.0005 1.3750 1.3755
5504 1-1/4 1.2505 1.3750 1.6255
5505 1-1/4 1.2505 1.8750 1.6255
5506 1-1/2 1.5005 1.3750 2.0005
5507 1-1/2 1.5005 1.8750 2.0005
5508 2 2.0005 3.8750 2.5005
5509 2-1/2 2.5005 4.8750 3.2505
5510 3 3.0005 4.8750 3.7505
D-M-E BUSHINGS AND DOWELS
3 - 4 Mold Base Library
TUBULAR DOWEL WITH NOMINAL I.D. FROM 3/8 TO 7/8 INCHES
Generic Part Name: TUB_DOWEL
InstanceName
NOMINALINTERIORDIAMETER
HOutside
Diameter
GInterior
Diameter
LLength
TD1 3/8 0.3752 0.2600 0.3750
TD2 3/8 0.3752 0.2600 0.8750
TD3 5/8 0.6252 0.3850 0.5000
TD4 5/8 0.6252 0.3850 1.3750
TD5 5/8 0.6252 0.3850 1.8750
TD6 5/8 0.6252 0.3850 2.3750
TD7 3/4 0.7502 0.5100 0.3750
TD8 3/4 0.7502 0.5100 0.5000
TD9 3/4 0.7502 0.5100 1.3750
TD10 3/4 0.7502 0.5100 1.8750
TD11 3/4 0.7502 0.5100 2.3750
TD12 3/4 0.7502 0.5100 2.8750
TD13 7/8 0.8752 0.6350 0.5000
TD14 7/8 0.8752 0.6350 2.3750
TD15 7/8 0.8752 0.6350 2.8750
Mold Base Library 4 - 1
D-M-E FASTENERS
HEXAGON SOCKET FLAT COUNTERSUNK HEAD CAP SCREW
Generic Part Name: HFHCS
9
D-M-E FASTENERS
4 - 2 Mold Base Library
SOCKET HEAD STRIPPER BOLT
Generic Part Name: SHSB
InstanceName
GBolt
Diameter
THREAD_DIA
ThreadsPer Inch
EThreadLength
HHead
Diameter
LLength
SB10 0.2500 0.1900 24.000 0.3750 0.3750 1.0000
SB11 0.2500 0.1900 24.000 0.3750 0.3750 1.2500
SB12 0.2500 0.1900 24.000 0.3750 0.3750 1.5000
SB20 0.3125 0.2500 20.000 0.4375 0.4375 1.0000
SB21 0.3125 0.2500 20.000 0.4375 0.4375 1.2500
SB22 0.3125 0.2500 20.000 0.4375 0.4375 1.5000
SB23 0.3125 0.2500 20.000 0.4375 0.4375 1.7500
SB24 0.3125 0.2500 20.000 0.4375 0.4375 2.0000
SB300 0.3750 0.3125 18.000 0.5000 0.5625 1.0000
SB301 0.3750 0.3125 18.000 0.5000 0.5625 1.2500
SB302 0.3750 0.3125 18.000 0.5000 0.5625 1.5000
SB303 0.3750 0.3125 18.000 0.5000 0.5625 1.7500
SB304 0.3750 0.3125 18.000 0.5000 0.5625 2.0000
SB305 0.3750 0.3125 18.000 0.5000 0.5625 2.2500
SB306 0.3750 0.3125 18.000 0.5000 0.5625 2.5000
SB307 0.3750 0.3125 18.000 0.5000 0.5625 2.7500
SB308 0.3750 0.3125 18.000 0.5000 0.5625 3.0000
SB309 0.3750 0.3125 18.000 0.5000 0.5625 3.2500
D-M-E FASTENERS
Mold Base Library 4 - 3
SB310 0.3750 0.3125 18.000 0.5000 0.5625 3.5000
SB311 0.3750 0.3125 18.000 0.5000 0.5625 3.7500
SB312 0.3750 0.3125 18.000 0.5000 0.5625 4.0000
SB400 0.5000 0.3750 16.000 0.6250 0.7500 1.0000
SB401 0.5000 0.3750 16.000 0.6250 0.7500 1.2500
SB402 0.5000 0.3750 16.000 0.6250 0.7500 1.5000
SB403 0.5000 0.3750 16.000 0.6250 0.7500 1.7500
SB404 0.5000 0.3750 16.000 0.6250 0.7500 2.0000
SB405 0.5000 0.3750 16.000 0.6250 0.7500 2.2500
SB406 0.5000 0.3750 16.000 0.6250 0.7500 2.5000
SB407 0.5000 0.3750 16.000 0.6250 0.7500 2.7500
SB408 0.5000 0.3750 16.000 0.6250 0.7500 3.0000
SB409 0.5000 0.3750 16.000 0.6250 0.7500 3.2500
SB410 0.5000 0.3750 16.000 0.6250 0.7500 3.5000
SB411 0.5000 0.3750 16.000 0.6250 0.7500 3.7500
SB412 0.5000 0.3750 16.000 0.6250 0.7500 4.0000
SB413 0.5000 0.3750 16.000 0.6250 0.7500 4.2500
SB414 0.5000 0.3750 16.000 0.6250 0.7500 4.5000
SB415 0.5000 0.3750 16.000 0.6250 0.7500 4.7500
SB416 0.5000 0.3750 16.000 0.6250 0.7500 5.0000
SB500 0.6250 0.5000 13.000 0.7500 0.8750 1.2500
SB501 0.6250 0.5000 13.000 0.7500 0.8750 1.5000
SB502 0.6250 0.5000 13.000 0.7500 0.8750 1.7500
SB503 0.6250 0.5000 13.000 0.7500 0.8750 2.0000
SB504 0.6250 0.5000 13.000 0.7500 0.8750 2.2500
SB505 0.6250 0.5000 13.000 0.7500 0.8750 2.5000
SB506 0.6250 0.5000 13.000 0.7500 0.8750 2.7500
SB507 0.6250 0.5000 13.000 0.7500 0.8750 3.0000
SB508 0.6250 0.5000 13.000 0.7500 0.8750 3.2500
SB509 0.6250 0.5000 13.000 0.7500 0.8750 3.5000
InstanceName
GBolt
Diameter
THREAD_DIA
ThreadsPer Inch
EThreadLength
HHead
Diameter
LLength
D-M-E FASTENERS
4 - 4 Mold Base Library
SB510 0.6250 0.5000 13.000 0.7500 0.8750 3.7500
SB511 0.6250 0.5000 13.000 0.7500 0.8750 4.0000
SB512 0.6250 0.5000 13.000 0.7500 0.8750 4.2500
SB513 0.6250 0.5000 13.000 0.7500 0.8750 4.5000
SB514 0.6250 0.5000 13.000 0.7500 0.8750 4.7500
SB515 0.6250 0.5000 13.000 0.7500 0.8750 5.0000
SB516 0.6250 0.5000 13.000 0.7500 0.8750 5.5000
SB517 0.6250 0.5000 13.000 0.7500 0.8750 6.0000
SB600 0.7500 0.6250 11.000 0.8750 1.0000 1.5000
SB601 0.7500 0.6250 11.000 0.8750 1.0000 1.7500
SB602 0.7500 0.6250 11.000 0.8750 1.0000 2.0000
SB603 0.7500 0.6250 11.000 0.8750 1.0000 2.2500
SB604 0.7500 0.6250 11.000 0.8750 1.0000 2.5000
SB605 0.7500 0.6250 11.000 0.8750 1.0000 2.7500
SB606 0.7500 0.6250 11.000 0.8750 1.0000 3.0000
SB607 0.7500 0.6250 11.000 0.8750 1.0000 3.2500
SB608 0.7500 0.6250 11.000 0.8750 1.0000 3.5000
SB609 0.7500 0.6250 11.000 0.8750 1.0000 3.7500
SB610 0.7500 0.6250 11.000 0.8750 1.0000 4.0000
SB611 0.7500 0.6250 11.000 0.8750 1.0000 4.2500
SB612 0.7500 0.6250 11.000 0.8750 1.0000 4.5000
SB613 0.7500 0.6250 11.000 0.8750 1.0000 4.7500
SB614 0.7500 0.6250 11.000 0.8750 1.0000 5.0000
SB615 0.7500 0.6250 11.000 0.8750 1.0000 5.5000
SB616 0.7500 0.6250 11.000 0.8750 1.0000 6.0000
SB617 0.7500 0.6250 11.000 0.8750 1.0000 7.0000
InstanceName
GBolt
Diameter
THREAD_DIA
ThreadsPer Inch
EThreadLength
HHead
Diameter
LLength
D-M-E FASTENERS
Mold Base Library 4 - 5
SOCKET HEAD CAP SCREW
Generic Part Name: SHCS
InstanceName
LLength
DScrew
Diameter
HHead
Diameter
KHead
Height
WSlot
Width
GENERIC 1.0000 0.50000 0.75000 0.50000 0.37500
SHCS01 0.5000 0.50000 0.75000 0.50000 0.37500
SHCS02 0.6250 0.50000 0.75000 0.50000 0.37500
SHCS03 0.7500 0.50000 0.75000 0.50000 0.37500
SHCS04 0.8750 0.50000 0.75000 0.50000 0.37500
SHCS05 1.0000 0.50000 0.75000 0.50000 0.37500
SHCS08 1.2500 0.50000 0.75000 0.50000 0.37500
SHCS09 1.5000 0.50000 0.75000 0.50000 0.37500
SHCS10 1.7500 0.50000 0.75000 0.50000 0.37500
SHCS11 2.0000 0.50000 0.75000 0.50000 0.37500
SHCS12 2.2500 0.50000 0.75000 0.50000 0.37500
SHCS13 2.5000 0.50000 0.75000 0.50000 0.37500
SHCS14 2.7500 0.50000 0.75000 0.50000 0.37500
SHCS15 3.0000 0.50000 0.75000 0.50000 0.37500
SHCS16 3.2500 0.50000 0.75000 0.50000 0.37500
SHCS17 3.5000 0.50000 0.75000 0.50000 0.37500
SHCS18 4.0000 0.50000 0.75000 0.50000 0.37500
D-M-E FASTENERS
4 - 6 Mold Base Library
SHCS19 4.5000 0.50000 0.75000 0.50000 0.37500
SHCS20 5.0000 0.50000 0.75000 0.50000 0.37500
SHCS21 5.2500 0.50000 0.75000 0.50000 0.37500
SHCS22 5.5000 0.50000 0.75000 0.50000 0.37500
SHCS23 5.7500 0.50000 0.75000 0.50000 0.37500
SHCS24 6.0000 0.50000 0.75000 0.50000 0.37500
SHCS25 7.0000 0.50000 0.75000 0.50000 0.37500
SHCS26 7.5000 0.50000 0.75000 0.50000 0.37500
SHCS27 8.0000 0.50000 0.75000 0.50000 0.37500
SHCS28 9.0000 0.50000 0.75000 0.50000 0.37500
SHCS29 10.0000 0.50000 0.75000 0.50000 0.37500
SHCS30 12.0000 0.50000 0.75000 0.50000 0.37500
SHCS31 1.0000 0.62500 0.94000 0.62500 0.50000
SHCS32 1.2500 0.62500 0.94000 0.62500 0.50000
SHCS33 1.5000 0.62500 0.94000 0.62500 0.50000
SHCS34 1.7500 0.62500 0.94000 0.62500 0.50000
SHCS35 2.0000 0.62500 0.94000 0.62500 0.50000
SHCS36 2.2500 0.62500 0.94000 0.62500 0.50000
SHCS37 2.5000 0.62500 0.94000 0.62500 0.50000
SHCS38 2.7500 0.62500 0.94000 0.62500 0.50000
SHCS39 3.0000 0.62500 0.94000 0.62500 0.50000
SHCS40 3.2500 0.62500 0.94000 0.62500 0.50000
SHCS41 3.5000 0.62500 0.94000 0.62500 0.50000
SHCS42 4.0000 0.62500 0.94000 0.62500 0.50000
SHCS43 4.5000 0.62500 0.94000 0.62500 0.50000
SHCS44 5.0000 0.62500 0.94000 0.62500 0.50000
SHCS45 5.5000 0.62500 0.94000 0.62500 0.50000
SHCS46 6.0000 0.62500 0.94000 0.62500 0.50000
SHCS47 6.5000 0.62500 0.94000 0.62500 0.50000
SHCS48 7.0000 0.62500 0.94000 0.62500 0.50000
InstanceName
LLength
DScrew
Diameter
HHead
Diameter
KHead
Height
WSlot
Width
D-M-E FASTENERS
Mold Base Library 4 - 7
SHCS49 7.5000 0.62500 0.94000 0.62500 0.50000
SHCS50 8.0000 0.62500 0.94000 0.62500 0.50000
SHCS51 10.0000 0.62500 0.94000 0.62500 0.50000
SHCS52 12.0000 0.62500 0.94000 0.62500 0.50000
SHCS53 0.3750 0.31250 0.46875 0.31250 0.25000
SHCS54 0.5000 0.31250 0.46875 0.31250 0.25000
SHCS55 0.6250 0.31250 0.46875 0.31250 0.25000
SHCS56 0.7500 0.31250 0.46875 0.31250 0.25000
SHCS57 0.8750 0.31250 0.46875 0.31250 0.25000
SHCS58 1.0000 0.31250 0.46875 0.31250 0.25000
SHCS59 1.2500 0.31250 0.46875 0.31250 0.25000
SHCS60 1.5000 0.31250 0.46875 0.31250 0.25000
SHCS61 1.7500 0.31250 0.46875 0.31250 0.25000
SHCS62 2.0000 0.31250 0.46875 0.31250 0.25000
SHCS63 2.2500 0.31250 0.46875 0.31250 0.25000
SHCS64 2.5000 0.31250 0.46875 0.31250 0.25000
SHCS65 2.7500 0.31250 0.46875 0.31250 0.25000
SHCS66 3.0000 0.31250 0.46875 0.31250 0.25000
SHCS67 3.2500 0.31250 0.46875 0.31250 0.25000
SHCS68 3.5000 0.31250 0.46875 0.31250 0.25000
SHCS69 0.5000 0.37500 0.56250 0.37500 0.31250
SHCS70 0.6250 0.37500 0.56250 0.37500 0.31250
SHCS71 0.7500 0.37500 0.56250 0.37500 0.31250
SHCS72 0.8750 0.37500 0.56250 0.37500 0.31250
SHCS73 1.0000 0.37500 0.56250 0.37500 0.31250
SHCS74 1.2500 0.37500 0.56250 0.37500 0.31250
SHCS75 1.5000 0.37500 0.56250 0.37500 0.31250
SHCS76 1.7500 0.37500 0.56250 0.37500 0.31250
SHCS77 2.0000 0.37500 0.56250 0.37500 0.31250
SHCS78 2.2500 0.37500 0.56250 0.37500 0.31250
InstanceName
LLength
DScrew
Diameter
HHead
Diameter
KHead
Height
WSlot
Width
D-M-E FASTENERS
4 - 8 Mold Base Library
SHCS79 2.5000 0.37500 0.56250 0.37500 0.31250
SHCS80 2.7500 0.37500 0.56250 0.37500 0.31250
SHCS81 3.0000 0.37500 0.56250 0.37500 0.31250
SHCS82 3.2500 0.37500 0.56250 0.37500 0.31250
SHCS83 3.5000 0.37500 0.56250 0.37500 0.31250
SHCS84 4.0000 0.37500 0.56250 0.37500 0.31250
SHCS85 4.0000 0.37500 0.56250 0.37500 0.31250
SHCS86 4.5000 0.37500 0.56250 0.37500 0.31250
SHCS87 5.0000 0.37500 0.56250 0.37500 0.31250
SHCS88 6.0000 0.37500 0.56250 0.37500 0.31250
InstanceName
LLength
DScrew
Diameter
HHead
Diameter
KHead
Height
WSlot
Width
Mold Base Library 5 - 1
D-M-E LOCATING RINGS
LOCATING RING, CATALOG NO. 6500
Generic Part Name: 6500
LOCATING RING, CATALOG NO. 6501
Generic Part Name: 6501
9
D-M-E LOCATING RINGS
5 - 2 Mold Base Library
LOCATING RING, CATALOG NO. 6501ln
Generic Part Name: 6501ln
LOCATING RING, CATALOG NO. 6502
Generic Part Name: 6502
D-M-E LOCATING RINGS
Mold Base Library 5 - 3
LOCATING RING, CATALOG NO. 6503
Generic Part Name: 6503
LOCATING RING, CATALOG NO. 6504
Generic Part Name: 6504
D-M-E LOCATING RINGS
5 - 4 Mold Base Library
LOCATING RING, CATALOG NO. 6505ln
Generic Part Name: 6505ln
LOCATING RING, CATALOG NO. 6510
Generic Part Name: 6510
D-M-E LOCATING RINGS
Mold Base Library 5 - 5
LOCATING RING, CATALOG NO. 6511
Generic Part Name: 6511
LOCATING RING, CATALOG NO. 6520
Generic Part Name: 6520
D-M-E LOCATING RINGS
5 - 6 Mold Base Library
LOCATING RING, CATALOG NO. 6521
Generic Part Name: 6521
LOCATING RING, CATALOG NO. 6522
Generic Part Name: 6522
D-M-E LOCATING RINGS
Mold Base Library 5 - 7
LOCATING RING, CATALOG NO. 6524
Generic Part Name: 6524
LOCATING RING, CATALOG NO. 6535
Generic Part Name: 6535
D-M-E LOCATING RINGS
5 - 8 Mold Base Library
LOCATING RING, CATALOG NO. 6536
Generic Part Name: 6536
LOCATING RING, CATALOG NO. 6537
Generic Part Name: 6537
Mold Base Library 6 - 1
D-M-E PINS AND SLEEVES
CORE PIN
Generic Part Name: CORE_PIN
InstanceName
GPin
Diameter
HHead
Diameter
KHead
Thickness
MOverallLength
C7_3 0.0938 0.2500 0.1250 3.00
C8_3 0.1094 0.2500 0.1250 3.00
C9_3 0.1250 0.2500 0.1250 3.00
C10_3 0.1406 0.2500 0.1250 3.00
C11_3 0.1562 0.2813 0.1562 3.00
C12_3 0.1719 0.3438 0.1875 3.00
C13_3 0.1875 0.3750 0.1875 3.00
C14_3 0.2031 0.3750 0.1875 3.00
C15_3 0.2188 0.4063 0.1875 3.00
C17_3 0.2500 0.4375 0.1875 3.00
C19_3 0.2813 0.4375 0.2500 3.00
C21_3 0.3125 0.5000 0.2500 3.00
C23_3 0.3438 0.5625 0.2500 3.00
C25_3 0.3750 0.6250 0.2500 3.00
C27_3 0.4063 0.6875 0.2500 3.00
C29_3 0.4375 0.6875 0.2500 3.00
C31_3 0.4688 0.7500 0.2500 3.00
C33_3 0.5000 0.7500 0.2500 3.00
C7_6 0.0938 0.2500 0.1250 6.00
9
D-M-E PINS AND SLEEVES
6 - 2 Mold Base Library
C8_6 0.1094 0.2500 0.1250 6.00
C9_6 0.1250 0.2500 0.1250 6.00
C10_6 0.1406 0.2500 0.1250 6.00
C11_6 0.1562 0.2813 0.1562 6.00
C12_6 0.1719 0.3438 0.1875 6.00
C13_6 0.1875 0.3750 0.1875 6.00
C14_6 0.2031 0.3750 0.1875 6.00
C15_6 0.2188 0.4063 0.1875 6.00
C17_6 0.2500 0.4375 0.1875 6.00
C19_6 0.2813 0.4375 0.2500 6.00
C21_6 0.3125 0.5000 0.2500 6.00
C23_6 0.3438 0.5625 0.2500 6.00
C25_6 0.3750 0.6250 0.2500 6.00
C27_6 0.4063 0.6875 0.2500 6.00
C29_6 0.4375 0.6875 0.2500 6.00
C31_6 0.4688 0.7500 0.2500 6.00
C33_6 0.5000 0.7500 0.2500 6.00
C35_6 0.5625 0.8125 0.2500 6.00
C37_6 0.6250 0.8750 0.2500 6.00
C41_6 0.7500 1.0000 0.2500 6.00
C7_10 0.0938 0.2500 0.1250 10.00
C8_10 0.1094 0.2500 0.1250 10.00
C9_10 0.1250 0.2500 0.1250 10.00
C10_10 0.1406 0.2500 0.1250 10.00
C11_10 0.1562 0.2813 0.1562 10.00
C12_10 0.1719 0.3438 0.1875 10.00
C13_10 0.1875 0.3750 0.1875 10.00
C14_10 0.2031 0.3750 0.1875 10.00
C15_10 0.2188 0.4063 0.1875 10.00
C17_10 0.2500 0.4375 0.1875 10.00
InstanceName
GPin
Diameter
HHead
Diameter
KHead
Thickness
MOverallLength
D-M-E PINS AND SLEEVES
Mold Base Library 6 - 3
C19_10 0.2813 0.4375 0.2500 10.00
C21_10 0.3125 0.5000 0.2500 10.00
C23_10 0.3438 0.5625 0.2500 10.00
C25_10 0.3750 0.6250 0.2500 10.00
C27_10 0.4063 0.6875 0.2500 10.00
C29_10 0.4375 0.6875 0.2500 10.00
C31_10 0.4688 0.7500 0.2500 10.00
C33_10 0.5000 0.7500 0.2500 10.00
C35_10 0.5625 0.8125 0.2500 10.00
C37_10 0.6250 0.8750 0.2500 10.00
C41_10 0.7500 1.0000 0.2500 10.00
InstanceName
GPin
Diameter
HHead
Diameter
KHead
Thickness
MOverallLength
D-M-E PINS AND SLEEVES
6 - 4 Mold Base Library
EJECTOR SLEEVE
Generic Part Name: EJ_SLV
InstanceName
BInner
Diameter
GOuter
Diameter
HHead
Diameter
KHead
Thickness
MOverallLength
LLength
S13_3 0.0938 0.1875 0.3750 0.1875 3.0000 1.7500
S15_3 0.1250 0.2188 0.4062 0.1875 3.0000 1.7500
S13_4 0.0938 0.1875 0.3750 0.1875 4.0000 1.7500
S15_4 0.1250 0.2188 0.4062 0.1875 4.0000 1.7500
S17_4 0.1562 0.2500 0.4375 0.1875 4.0000 2.2500
S21_4 0.1875 0.3125 0.5000 0.2500 4.0000 2.2500
S23_4 0.2188 0.3438 0.5625 0.2500 4.0000 2.2500
S25_4 0.2500 0.3750 0.6250 0.2500 4.0000 2.2500
S29_4 0.3125 0.4375 0.6875 0.2500 4.0000 2.2500
S33_4 0.3750 0.5000 0.7500 0.2500 4.0000 2.2500
S37_4 0.4375 0.6250 0.8750 0.2500 4.0000 2.2500
S39_4 0.5000 0.6875 0.9375 0.2500 4.0000 2.2500
S41_4 0.5625 0.7500 1.0000 0.2500 4.0000 2.2500
S45_4 0.6250 0.8750 1.1250 0.2500 4.0000 2.2500
S47_4 0.7500 1.0000 1.2500 0.2500 4.0000 2.2500
°
B + 1/64
D-M-E PINS AND SLEEVES
Mold Base Library 6 - 5
S13_5 0.0938 0.1875 0.3750 0.1875 5.0000 1.7500
S15_5 0.1250 0.2188 0.4062 0.1875 5.0000 1.7500
S17_5 0.1562 0.2500 0.4375 0.1875 5.0000 2.2500
S21_5 0.1875 0.3125 0.5000 0.2500 5.0000 2.2500
S23_5 0.2188 0.3438 0.5625 0.2500 5.0000 2.2500
S25_5 0.2500 0.3750 0.6250 0.2500 5.0000 2.2500
S29_5 0.3125 0.4375 0.6875 0.2500 5.0000 2.2500
S33_5 0.3750 0.5000 0.7500 0.2500 5.0000 2.2500
S37_5 0.4375 0.6250 0.8750 0.2500 5.0000 2.2500
S39_5 0.5000 0.6875 0.9375 0.2500 5.0000 2.2500
S41_5 0.5625 0.7500 1.0000 0.2500 5.0000 2.2500
S45_5 0.6250 0.8750 1.1250 0.2500 5.0000 2.2500
S47_5 0.7500 1.0000 1.2500 0.2500 5.0000 2.2500
S13_6 0.0938 0.1875 0.3750 0.1875 6.0000 1.7500
S15_6 0.1250 0.2188 0.4062 0.1875 6.0000 1.7500
S17_6 0.1562 0.2500 0.4375 0.1875 6.0000 2.2500
S21_6 0.1875 0.3125 0.5000 0.2500 6.0000 2.2500
S23_6 0.2188 0.3438 0.5625 0.2500 6.0000 2.2500
S25_6 0.2500 0.3750 0.6250 0.2500 6.0000 2.2500
S29_6 0.3125 0.4375 0.6875 0.2500 6.0000 2.2500
S33_6 0.3750 0.5000 0.7500 0.2500 6.0000 2.2500
S37_6 0.4375 0.6250 0.8750 0.2500 6.0000 2.2500
S39_6 0.5000 0.6875 0.9375 0.2500 6.0000 2.2500
S41_6 0.5625 0.7500 1.0000 0.2500 6.0000 2.2500
S45_6 0.6250 0.8750 1.1250 0.2500 6.0000 2.2500
S47_6 0.7500 1.0000 1.2500 0.2500 6.0000 2.2500
S13_7 0.0938 0.1875 0.3750 0.1875 7.0000 1.7500
S15_7 0.1250 0.2188 0.4062 0.1875 7.0000 1.7500
S17_7 0.1562 0.2500 0.4375 0.1875 7.0000 2.2500
S21_7 0.1875 0.3125 0.5000 0.2500 7.0000 2.2500
InstanceName
BInner
Diameter
GOuter
Diameter
HHead
Diameter
KHead
Thickness
MOverallLength
LLength
D-M-E PINS AND SLEEVES
6 - 6 Mold Base Library
S23_7 0.2188 0.3438 0.5625 0.2500 7.0000 2.2500
S25_7 0.2500 0.3750 0.6250 0.2500 7.0000 2.2500
S29_7 0.3125 0.4375 0.6875 0.2500 7.0000 2.2500
S33_7 0.3750 0.5000 0.7500 0.2500 7.0000 2.2500
S37_7 0.4375 0.6250 0.8750 0.2500 7.0000 2.2500
S39_7 0.5000 0.6875 0.9375 0.2500 7.0000 2.2500
S41_7 0.5625 0.7500 1.0000 0.2500 7.0000 2.2500
S45_7 0.6250 0.8750 1.1250 0.2500 7.0000 2.2500
S47_7 0.7500 1.0000 1.2500 0.2500 7.0000 2.2500
S17_8 0.1562 0.2500 0.4375 0.1875 8.0000 2.2500
S21_8 0.1875 0.3125 0.5000 0.2500 8.0000 2.2500
S23_8 0.2188 0.3438 0.5625 0.2500 8.0000 2.2500
S25_8 0.2500 0.3750 0.6250 0.2500 8.0000 2.2500
S29_8 0.3125 0.4375 0.6875 0.2500 8.0000 2.2500
S33_8 0.3750 0.5000 0.7500 0.2500 8.0000 2.2500
S37_8 0.4375 0.6250 0.8750 0.2500 8.0000 2.2500
S39_8 0.5000 0.6875 0.9375 0.2500 8.0000 2.2500
S41_8 0.5625 0.7500 1.0000 0.2500 8.0000 2.2500
S45_8 0.6250 0.8750 1.1250 0.2500 8.0000 2.2500
S47_8 0.7500 1.0000 1.2500 0.2500 8.0000 2.2500
S17_9 0.1562 0.2500 0.4375 0.1875 9.0000 2.2500
S21_9 0.1875 0.3125 0.5000 0.2500 9.0000 2.2500
S23_9 0.2188 0.3438 0.5625 0.2500 9.0000 2.2500
S25_9 0.2500 0.3750 0.6250 0.2500 9.0000 2.2500
S29_9 0.3125 0.4375 0.6875 0.2500 9.0000 2.2500
S33_9 0.3750 0.5000 0.7500 0.2500 9.0000 2.2500
S37_9 0.4375 0.6250 0.8750 0.2500 9.0000 2.2500
S39_9 0.5000 0.6875 0.9375 0.2500 9.0000 2.2500
S41_9 0.5625 0.7500 1.0000 0.2500 9.0000 2.2500
S45_9 0.6250 0.8750 1.1250 0.2500 9.0000 2.2500
InstanceName
BInner
Diameter
GOuter
Diameter
HHead
Diameter
KHead
Thickness
MOverallLength
LLength
D-M-E PINS AND SLEEVES
Mold Base Library 6 - 7
S47_9 0.7500 1.0000 1.2500 0.2500 9.0000 2.2500
S17_10 0.1562 0.2500 0.4375 0.1875 10.0000 2.2500
S21_10 0.1875 0.3125 0.5000 0.2500 10.0000 2.2500
S23_10 0.2188 0.3438 0.5625 0.2500 10.0000 2.2500
S25_10 0.2500 0.3750 0.6250 0.2500 10.0000 2.2500
S29_10 0.3125 0.4375 0.6875 0.2500 10.0000 2.2500
S33_10 0.3750 0.5000 0.7500 0.2500 10.0000 2.2500
S37_10 0.4375 0.6250 0.8750 0.2500 10.0000 2.2500
S39_10 0.5000 0.6875 0.9375 0.2500 10.0000 2.2500
S41_10 0.5625 0.7500 1.0000 0.2500 10.0000 2.2500
S45_10 0.6250 0.8750 1.1250 0.2500 10.0000 2.2500
S47_10 0.7500 1.0000 1.2500 0.2500 10.0000 2.2500
S21_11 0.1875 0.3125 0.5000 0.2500 11.0000 2.2500
S25_11 0.2500 0.3750 0.6250 0.2500 11.0000 2.2500
S29_11 0.3125 0.4375 0.6875 0.2500 11.0000 2.2500
S33_11 0.3750 0.5000 0.7500 0.2500 11.0000 2.2500
S37_11 0.4375 0.6250 0.8750 0.2500 11.0000 2.2500
S39_11 0.5000 0.6875 0.9375 0.2500 11.0000 2.2500
S41_11 0.5625 0.7500 1.0000 0.2500 11.0000 2.2500
S45_11 0.6250 0.8750 1.1250 0.2500 11.0000 2.2500
S47_11 0.7500 1.0000 1.2500 0.2500 11.0000 2.2500
S21_12 0.1875 0.3125 0.5000 0.2500 12.0000 2.2500
S25_12 0.2500 0.3750 0.6250 0.2500 12.0000 2.2500
S29_12 0.3125 0.4375 0.6875 0.2500 12.0000 2.2500
S33_12 0.3750 0.5000 0.7500 0.2500 12.0000 2.2500
S37_12 0.4375 0.6250 0.8750 0.2500 12.0000 2.2500
S39_12 0.5000 0.6875 0.9375 0.2500 12.0000 2.2500
S41_12 0.5625 0.7500 1.0000 0.2500 12.0000 2.2500
S45_12 0.6250 0.8750 1.1250 0.2500 12.0000 2.2500
S47_12 0.7500 1.0000 1.2500 0.2500 12.0000 2.2500
InstanceName
BInner
Diameter
GOuter
Diameter
HHead
Diameter
KHead
Thickness
MOverallLength
LLength
D-M-E PINS AND SLEEVES
6 - 8 Mold Base Library
HOTWORK EJECTOR PIN - LETTER SIZE DIAMETERS
Generic Part Name: EJ_PIN_LTR
InstanceName
GPin
Diameter
HHead
Diameter
KHead
Thickness
A 0.2340 0.4375 0.1875
EX_B 0.2380 0.4375 0.1875
EX_C 0.2420 0.4375 0.1875
EX_D 0.2460 0.4375 0.1875
E 0.2500 0.4375 0.1875
EX_F 0.2570 0.4375 0.1875
EX_G 0.2610 0.4375 0.2500
H 0.2660 0.4375 0.2500
EX_I 0.2720 0.4375 0.2500
EX_J 0.2770 0.4375 0.2500
K 0.2810 0.4375 0.2500
EX_L 0.2900 0.5000 0.2500
EX_M 0.2950 0.5000 0.2500
EX_N 0.3020 0.5000 0.2500
O 0.3160 0.5000 0.2500
EX_P 0.3230 0.5625 0.2500
EX_Q 0.3320 0.5625 0.2500
EX_R 0.3390 0.5625 0.2500
S 0.3480 0.5625 0.2500
T 0.3580 0.6250 0.2500
EX_U 0.3680 0.6250 0.2500
EX_V 0.3770 0.6250 0.2500
D-M-E PINS AND SLEEVES
Mold Base Library 6 - 9
EX_W 0.3860 0.6250 0.2500
EX_X 0.3970 0.6875 0.2500
EX_Y 0.4040 0.6875 0.2500
Z 0.4130 0.6875 0.2500
InstanceName
GPin
Diameter
HHead
Diameter
KHead
Thickness
D-M-E PINS AND SLEEVES
6 - 10 Mold Base Library
HOTWORK EJECTOR PIN - SHOULDER TYPE
Generic Part Name: EJ_PIN_SD
InstanceName
MOverallLength
DPin
Diameter
LShoulderLength
EX3_1SH_6 6.00 0.0469 0.5000
EX3_2SH_6 6.00 0.0469 2.0000
EX5_1SH_6 6.00 0.0625 0.5000
EX5_2SH_6 6.00 0.0625 2.0000
EX6_1SH_6 6.00 0.0781 0.5000
EX6_2SH_6 6.00 0.0781 2.0000
EX7_1SH_6 6.00 0.0938 0.5000
EX7_2SH_6 6.00 0.0938 2.0000
EX8_1SH_6 6.00 0.1094 0.5000
EX8_2SH_6 6.00 0.1094 2.0000
EX3_1SH_10 10.00 0.0469 0.5000
EX3_2SH_10 10.00 0.0469 2.0000
EX5_1SH_10 10.00 0.0625 0.5000
EX5_2SH_10 10.00 0.0625 2.0000
EX6_1SH_10 10.00 0.0781 0.5000
EX6_2SH_10 10.00 0.0781 2.0000
EX7_1SH_10 10.00 0.0938 0.5000
EX7_2SH_10 10.00 0.0938 2.0000
EX8_1SH_10 10.00 0.1094 0.5000
EX8_2SH_10 10.00 0.1094 2.0000
D-M-E PINS AND SLEEVES
Mold Base Library 6 - 11
EX3_1SH_14 14.00 0.0469 0.5000
EX3_2SH_14 14.00 0.0469 2.0000
EX5_1SH_14 14.00 0.0625 0.5000
EX5_2SH_14 14.00 0.0625 2.0000
EX6_1SH_14 14.00 0.0781 0.5000
EX6_2SH_14 14.00 0.0781 2.0000
EX7_1SH_14 14.00 0.0938 0.5000
EX7_2SH_14 14.00 0.0938 2.0000
EX8_1SH_14 14.00 0.1094 0.5000
EX8_2SH_14 14.00 0.1094 2.0000
InstanceName
MOverallLength
DPin
Diameter
LShoulderLength
D-M-E PINS AND SLEEVES
6 - 12 Mold Base Library
HOTWORK EJECTOR PINS - STRAIGHT TYPE
Generic Part Name: EJ_PIN_STR
InstanceName
MOverallLength
GPin
Diameter
HHead
Diameter
KHead
Thickness
EX3_NS_6 6.00 0.0469 0.2500 0.1250
EX5_NS_6 6.00 0.0625 0.2500 0.1250
EX6_NS_6 6.00 0.0781 0.2500 0.1250
EX7_NS_6 6.00 0.0938 0.2500 0.1250
EX8_NS_6 6.00 0.1094 0.2500 0.1250
EX7_NS_10 10.00 0.0938 0.2500 0.1250
EX8_NS_10 10.00 0.1094 0.2500 0.1250
EX9_6 6.00 0.1250 0.2500 0.1250
EX11_6 6.00 0.1563 0.2813 0.1563
EX13_6 6.00 0.1875 0.3750 0.1875
EX15_6 6.00 0.2188 0.4063 0.1875
EX17_6 6.00 0.2500 0.4375 0.1875
EX19_6 6.00 0.2813 0.4375 0.2500
EX21_6 6.00 0.3125 0.5000 0.2500
EX23_6 6.00 0.3438 0.5625 0.2500
EX25_6 6.00 0.3750 0.6250 0.2500
EX27_6 6.00 0.4063 0.6875 0.2500
EX29_6 6.00 0.4375 0.6875 0.2500
EX33_6 6.00 0.5000 0.7500 0.2500
EX35_6 6.00 0.5625 0.8125 0.2500
D-M-E PINS AND SLEEVES
Mold Base Library 6 - 13
EX37_6 6.00 0.6250 0.8750 0.2500
EX41_6 6.00 0.7500 1.0000 0.2500
EX47_6 6.00 1.0000 1.2500 0.2500
EX9_10 10.00 0.1250 0.2500 0.1250
EX10_10 10.00 0.1406 0.2500 0.1250
EX11_10 10.00 0.1563 0.2813 0.1563
EX12_10 10.00 0.1719 0.3438 0.1875
EX13_10 10.00 0.1875 0.3750 0.1875
EX14_10 10.00 0.2031 0.3750 0.1875
EX15_10 10.00 0.2188 0.4063 0.1875
EX16_10 10.00 0.2348 0.4063 0.1875
EX17_10 10.00 0.2500 0.4375 0.1875
EX18_10 10.00 0.2656 0.4375 0.2500
EX19_10 10.00 0.2813 0.4375 0.2500
EX20_10 10.00 0.2969 0.5000 0.2500
EX21_10 10.00 0.3125 0.5000 0.2500
EX22_10 10.00 0.3281 0.5625 0.2500
EX23_10 10.00 0.3438 0.5625 0.2500
EX24_10 10.00 0.3594 0.6250 0.2500
EX25_10 10.00 0.3750 0.6250 0.2500
EX27_10 10.00 0.4063 0.6875 0.2500
EX29_10 10.00 0.4375 0.6875 0.2500
EX31_10 10.00 0.4688 0.7500 0.2500
EX33_10 10.00 0.5000 0.7500 0.2500
EX35_10 10.00 0.5625 0.8125 0.2500
EX37_10 10.00 0.6250 0.8750 0.2500
EX39_10 10.00 0.6875 0.9375 0.2500
EX41_10 10.00 0.7500 1.0000 0.2500
EX45_10 10.00 0.8750 1.1250 0.2500
EX47_10 10.00 1.0000 1.2500 0.2500
InstanceName
MOverallLength
GPin
Diameter
HHead
Diameter
KHead
Thickness
D-M-E PINS AND SLEEVES
6 - 14 Mold Base Library
EX9_14 14.00 0.1250 0.2500 0.1250
EX10_14 14.00 0.1406 0.2500 0.1250
EX11_14 14.00 0.1563 0.2813 0.1563
EX12_14 14.00 0.1719 0.3438 0.1875
EX13_14 14.00 0.1875 0.3750 0.1875
EX14_14 14.00 0.2031 0.3750 0.1875
EX15_14 14.00 0.2188 0.4063 0.1875
EX16_14 14.00 0.2348 0.4063 0.1875
EX17_14 14.00 0.2500 0.4375 0.1875
EX18_14 14.00 0.2656 0.4375 0.2500
EX19_14 14.00 0.2813 0.4375 0.2500
EX20_14 14.00 0.2969 0.5000 0.2500
EX21_14 14.00 0.3125 0.5000 0.2500
EX22_14 14.00 0.3281 0.5625 0.2500
EX23_14 14.00 0.3438 0.5625 0.2500
EX24_14 14.00 0.3594 0.6250 0.2500
EX25_14 14.00 0.3750 0.6250 0.2500
EX27_14 14.00 0.4063 0.6875 0.2500
EX29_14 14.00 0.4375 0.6875 0.2500
EX33_14 14.00 0.5000 0.7500 0.2500
EX35_14 14.00 0.5625 0.8125 0.2500
EX37_14 14.00 0.6250 0.8750 0.2500
EX41_14 14.00 0.7500 1.0000 0.2500
EX47_14 14.00 1.0000 1.2500 0.2500
EX11_18 18.00 0.1563 0.2813 0.1563
EX13_18 18.00 0.1875 0.3750 0.1875
EX17_18 18.00 0.2500 0.4375 0.1875
EX19_18 18.00 0.2813 0.4375 0.2500
EX21_18 18.00 0.3125 0.5000 0.2500
EX25_18 18.00 0.3750 0.6250 0.2500
InstanceName
MOverallLength
GPin
Diameter
HHead
Diameter
KHead
Thickness
D-M-E PINS AND SLEEVES
Mold Base Library 6 - 15
EX27_18 18.00 0.4063 0.6875 0.2500
EX29_18 18.00 0.4375 0.6875 0.2500
EX31_18 18.00 0.4688 0.7500 0.2500
EX33_18 18.00 0.5000 0.7500 0.2500
EX35_18 18.00 0.5625 0.8125 0.2500
EX37_18 18.00 0.6250 0.8750 0.2500
EX39_18 18.00 0.6875 0.9375 0.2500
EX41_18 18.00 0.7500 1.0000 0.2500
EX45_18 18.00 0.8750 1.1250 0.2500
EX47_18 18.00 1.0000 1.2500 0.2500
EX13_25 25.00 0.1875 0.3750 0.1875
EX15_25 25.00 0.2188 0.4063 0.1875
EX17_25 25.00 0.2500 0.4375 0.1875
EX18_25 25.00 0.2656 0.4375 0.2500
EX19_25 25.00 0.2813 0.4375 0.2500
EX21_25 25.00 0.3125 0.5000 0.2500
EX22_25 25.00 0.3281 0.5625 0.2500
EX23_25 25.00 0.3438 0.5625 0.2500
EX25_25 25.00 0.3750 0.6250 0.2500
EX27_25 25.00 0.4063 0.6875 0.2500
EX29_25 25.00 0.4375 0.6875 0.2500
EX31_25 25.00 0.4688 0.7500 0.2500
EX33_25 25.00 0.5000 0.7500 0.2500
EX35_25 25.00 0.5625 0.8125 0.2500
EX37_25 25.00 0.6250 0.8750 0.2500
EX39_25 25.00 0.6875 0.9375 0.2500
EX41_25 25.00 0.7500 1.0000 0.2500
EX45_25 25.00 0.8750 1.1250 0.2500
EX47_25 25.00 1.0000 1.2500 0.2500
EX25_36 36.00 0.3750 0.6250 0.2500
InstanceName
MOverallLength
GPin
Diameter
HHead
Diameter
KHead
Thickness
D-M-E PINS AND SLEEVES
6 - 16 Mold Base Library
EX29_36 36.00 0.4375 0.6875 0.2500
EX33_36 36.00 0.5000 0.7500 0.2500
EX37_36 36.00 0.6250 0.8750 0.2500
EX41_36 36.00 0.7500 1.0000 0.2500
EX47_36 36.00 1.0000 1.2500 0.2500
InstanceName
MOverallLength
GPin
Diameter
HHead
Diameter
KHead
Thickness
D-M-E PINS AND SLEEVES
Mold Base Library 6 - 17
LEADER PIN WITH NOMINAL DIAMETER FROM 3/4 TO 1-1/2 INCHES
Generic Part Name: LD _PIN
InstanceName
GPin
Diameter
HHead
Diameter
KHead
Thickness
PShoulderDiameter
MOverallLength
LShoulderLength
5000_GL 0.7490 0.9900 0.1875 0.7510 1.7500 0.8750
5001_GL 0.7490 0.9900 0.1875 0.7510 2.2500 0.8750
5002_GL 0.7490 0.9900 0.1875 0.7510 2.7500 0.8750
5003_GL 0.7490 0.9900 0.1875 0.7510 3.2500 0.8750
5004_GL 0.7490 0.9900 0.1875 0.7510 3.7500 0.8750
5005_GL 0.7490 0.9900 0.1875 0.7510 4.2500 1.3750
5006_GL 0.7490 0.9900 0.1875 0.7510 4.7500 1.3750
5007_GL 0.7490 0.9900 0.1875 0.7510 5.2500 1.3750
5008_GL 0.7490 0.9900 0.1875 0.7510 5.7500 1.8750
5009_GL 0.7490 0.9900 0.1875 0.7510 6.2500 1.8750
5010_GL 0.7490 0.9900 0.1875 0.7510 6.7500 1.8750
5011_GL 0.7490 0.9900 0.1875 0.7510 7.2500 1.8750
5012_GL 0.7490 0.9900 0.1875 0.7510 7.7500 1.8750
5015_GL 0.7490 0.9900 0.1875 0.7510 9.2500 1.8750
5099_GL 0.8740 1.1150 0.2500 0.8760 1.7500 0.8750
5100_GL 0.8740 1.1150 0.2500 0.8760 2.2500 0.8750
D-M-E PINS AND SLEEVES
6 - 18 Mold Base Library
5101_GL 0.8740 1.1150 0.2500 0.8760 2.7500 0.8750
5102_GL 0.8740 1.1150 0.2500 0.8760 3.2500 0.8750
5103_GL 0.8740 1.1150 0.2500 0.8760 3.7500 0.8750
5104_GL 0.8740 1.1150 0.2500 0.8760 4.2500 1.3750
5105_GL 0.8740 1.1150 0.2500 0.8760 4.7500 1.3750
5106_GL 0.8740 1.1150 0.2500 0.8760 5.2500 1.3750
5107_GL 0.8740 1.1150 0.2500 0.8760 5.7500 1.3750
5108_GL 0.8740 1.1150 0.2500 0.8760 6.2500 1.3750
5109_GL 0.8740 1.1150 0.2500 0.8760 6.7500 1.8750
5110_GL 0.8740 1.1150 0.2500 0.8760 7.2500 1.8750
5111_GL 0.8740 1.1150 0.2500 0.8760 7.7500 1.8750
5112_GL 0.8740 1.1150 0.2500 0.8760 8.2500 1.8750
5113_GL 0.8740 1.1150 0.2500 0.8760 8.7500 1.8750
5117_GL 0.8740 1.1150 0.2500 0.8760 10.7500 1.8750
5120_GL 0.8740 1.1150 0.2500 0.8760 12.2500 1.8750
5198_GL 0.9990 1.2400 0.2500 1.0010 1.7500 0.8750
5199_GL 0.9990 1.2400 0.2500 1.0010 2.2500 0.8750
5200_GL 0.9990 1.2400 0.2500 1.0010 2.7500 0.8750
5201_GL 0.9990 1.2400 0.2500 1.0010 3.2500 0.8750
5202_GL 0.9990 1.2400 0.2500 1.0010 3.7500 0.8750
5203_GL 0.9990 1.2400 0.2500 1.0010 4.2500 1.3750
5204_GL 0.9990 1.2400 0.2500 1.0010 4.7500 1.3750
5205_GL 0.9990 1.2400 0.2500 1.0010 5.2500 1.3750
5206_GL 0.9990 1.2400 0.2500 1.0010 5.7500 1.3750
5207_GL 0.9990 1.2400 0.2500 1.0010 6.2500 1.3750
5208_GL 0.9990 1.2400 0.2500 1.0010 6.7500 1.8750
5209_GL 0.9990 1.2400 0.2500 1.0010 7.2500 1.8750
5210_GL 0.9990 1.2400 0.2500 1.0010 7.7500 1.8750
5211_GL 0.9990 1.2400 0.2500 1.0010 8.2500 1.8750
5212_GL 0.9990 1.2400 0.2500 1.0010 8.7500 1.8750
InstanceName
GPin
Diameter
HHead
Diameter
KHead
Thickness
PShoulderDiameter
MOverallLength
LShoulderLength
D-M-E PINS AND SLEEVES
Mold Base Library 6 - 19
5213_GL 0.9990 1.2400 0.2500 1.0010 9.2500 1.8750
5214_GL 0.9990 1.2400 0.2500 1.0010 9.7500 1.8750
5215_GL 0.9990 1.2400 0.2500 1.0010 10.2500 1.8750
5216_GL 0.9990 1.2400 0.2500 1.0010 10.7500 1.8750
5217_GL 0.9990 1.2400 0.2500 1.0010 11.2500 1.8750
5218_GL 0.9990 1.2400 0.2500 1.0010 11.7500 1.8750
5219_GL 0.9990 1.2400 0.2500 1.0010 12.2500 1.8750
5300_GL 1.2490 1.4900 0.3125 1.2510 2.7500 0.8750
5301_GL 1.2490 1.4900 0.3125 1.2510 3.2500 0.8750
5302_GL 1.2490 1.4900 0.3125 1.2510 3.7500 0.8750
5303_GL 1.2490 1.4900 0.3125 1.2510 4.2500 0.8750
5304_GL 1.2490 1.4900 0.3125 1.2510 4.7500 1.3750
5305_GL 1.2490 1.4900 0.3125 1.2510 5.2500 1.3750
5306_GL 1.2490 1.4900 0.3125 1.2510 5.7500 1.3750
5307_GL 1.2490 1.4900 0.3125 1.2510 6.2500 1.3750
5308_GL 1.2490 1.4900 0.3125 1.2510 6.7500 1.8750
5309_GL 1.2490 1.4900 0.3125 1.2510 7.2500 1.8750
5310_GL 1.2490 1.4900 0.3125 1.2510 7.7500 1.8750
5311_GL 1.2490 1.4900 0.3125 1.2510 8.2500 1.8750
5312_GL 1.2490 1.4900 0.3125 1.2510 8.7500 1.8750
5313_GL 1.2490 1.4900 0.3125 1.2510 9.2500 1.8750
5314_GL 1.2490 1.4900 0.3125 1.2510 9.7500 1.8750
5315_GL 1.2490 1.4900 0.3125 1.2510 10.2500 1.8750
5316_GL 1.2490 1.4900 0.3125 1.2510 10.7500 1.8750
5317_GL 1.2490 1.4900 0.3125 1.2510 11.2500 1.8750
5318_GL 1.2490 1.4900 0.3125 1.2510 11.7500 1.8750
5319_GL 1.2490 1.4900 0.3125 1.2510 12.2500 1.8750
5320_GL 1.2490 1.4900 0.3125 1.2510 12.7500 1.8750
5321_GL 1.2490 1.4900 0.3125 1.2510 13.2500 1.8750
5322_GL 1.2490 1.4900 0.3125 1.2510 13.7500 1.8750
InstanceName
GPin
Diameter
HHead
Diameter
KHead
Thickness
PShoulderDiameter
MOverallLength
LShoulderLength
D-M-E PINS AND SLEEVES
6 - 20 Mold Base Library
5324_GL 1.2490 1.4900 0.3125 1.2510 14.7500 1.8750
5326_GL 1.2490 1.4900 0.3125 1.2510 15.7500 1.8750
5402_GL 1.4990 1.7400 0.3125 1.5010 3.7500 1.3750
5403_GL 1.4990 1.7400 0.3125 1.5010 4.2500 1.3750
5404_GL 1.4990 1.7400 0.3125 1.5010 4.7500 1.3750
5405_GL 1.4990 1.7400 0.3125 1.5010 5.2500 1.3750
5406_GL 1.4990 1.7400 0.3125 1.5010 5.7500 1.3750
5407_GL 1.4990 1.7400 0.3125 1.5010 6.2500 1.3750
5408_GL 1.4990 1.7400 0.3125 1.5010 6.7500 1.3750
5410_GL 1.4990 1.7400 0.3125 1.5010 7.7500 1.8750
5412_GL 1.4990 1.7400 0.3125 1.5010 8.7500 1.8750
5414_GL 1.4990 1.7400 0.3125 1.5010 9.7500 1.8750
5416_GL 1.4990 1.7400 0.3125 1.5010 10.7500 1.8750
5418_GL 1.4990 1.7400 0.3125 1.5010 11.7500 1.8750
5420_GL 1.4990 1.7400 0.3125 1.5010 12.7500 1.8750
5422_GL 1.4990 1.7400 0.3125 1.5010 13.7500 1.8750
5424_GL 1.4990 1.7400 0.3125 1.5010 14.7500 1.8750
5426_GL 1.4990 1.7400 0.3125 1.5010 15.7500 1.8750
InstanceName
GPin
Diameter
HHead
Diameter
KHead
Thickness
PShoulderDiameter
MOverallLength
LShoulderLength
D-M-E PINS AND SLEEVES
Mold Base Library 6 - 21
LEADER PIN WITH NOMINAL DIAMETER FROM 2 TO 3 INCHES
Generic Part Name: LD_PIN_L
InstanceName
GPin
Diameter
HHead
Diameter
KHead
Thickness
PShoulderDiameter
MOverallLength
LShoulderLength
5606_GL 1.9990 2.2400 0.3125 2.0010 5.7500 1.8750
5608_GL 1.9990 2.2400 0.3125 2.0010 6.7500 1.8750
5610_GL 1.9990 2.2400 0.3125 2.0010 7.7500 1.8750
5612_GL 1.9990 2.2400 0.3125 2.0010 8.7500 1.8750
5614_GL 1.9990 2.2400 0.3125 2.0010 9.7500 1.8750
5616_GL 1.9990 2.2400 0.3125 2.0010 10.7500 1.8750
5618_GL 1.9990 2.2400 0.3125 2.0010 11.7500 1.8750
5620_GL 1.9990 2.2400 0.3125 2.0010 12.7500 1.8750
5622_GL 1.9990 2.2400 0.3125 2.0010 13.7500 1.8750
5624_GL 1.9990 2.2400 0.3125 2.0010 14.7500 1.8750
5626_GL 1.9990 2.2400 0.3125 2.0010 15.7500 1.8750
5628_GL 1.9990 2.2400 0.3125 2.0010 16.7500 2.3750
5632_GL 1.9990 2.2400 0.3125 2.0010 18.7500 2.3750
5806_GL 2.4990 2.7400 0.3125 2.5010 5.7500 2.3750
5808_GL 2.4990 2.7400 0.3125 2.5010 6.7500 2.3750
5810_GL 2.4990 2.7400 0.3125 2.5010 7.7500 2.3750
D-M-E PINS AND SLEEVES
6 - 22 Mold Base Library
5812_GL 2.4990 2.7400 0.3125 2.5010 8.7500 2.3750
5814_GL 2.4990 2.7400 0.3125 2.5010 9.7500 2.3750
5816_GL 2.4990 2.7400 0.3125 2.5010 10.7500 2.3750
5818_GL 2.4990 2.7400 0.3125 2.5010 11.7500 2.3750
5820_GL 2.4990 2.7400 0.3125 2.5010 12.7500 2.3750
5822_GL 2.4990 2.7400 0.3125 2.5010 13.7500 2.3750
5824_GL 2.4990 2.7400 0.3125 2.5010 14.7500 2.3750
5826_GL 2.4990 2.7400 0.3125 2.5010 15.7500 2.3750
5828_GL 2.4990 2.7400 0.3125 2.5010 16.7500 2.3750
5832_GL 2.4990 2.7400 0.3125 2.5010 18.7500 2.3750
6012_GL 2.9990 3.3650 0.5000 3.0010 8.7500 2.8750
6016_GL 2.9990 3.3650 0.5000 3.0010 10.7500 2.8750
6020_GL 2.9990 3.3650 0.5000 3.0010 12.7500 2.8750
6024_GL 2.9990 3.3650 0.5000 3.0010 14.7500 2.8750
6028_GL 2.9990 3.3650 0.5000 3.0010 16.7500 2.8750
6032_GL 2.9990 3.3650 0.5000 3.0010 18.7500 2.8750
InstanceName
GPin
Diameter
HHead
Diameter
KHead
Thickness
PShoulderDiameter
MOverallLength
LShoulderLength
D-M-E PINS AND SLEEVES
Mold Base Library 6 - 23
RETURN PIN
Generic Part Name: RETURN_PIN
InstanceName
GPin
Diameter
MOverallLength
HHead
Diameter
7410 0.5000 3.5625 0.7500
7411 0.5000 4.0625 0.7500
7412 0.5000 4.5625 0.7500
7413 0.5000 5.0625 0.7500
7414 0.5000 5.5625 0.7500
7415 0.5000 6.0625 0.7500
7416 0.5000 6.5625 0.7500
7510 0.6250 4.0625 0.8750
7511 0.6250 4.5625 0.8750
7512 0.6250 5.0625 0.8750
7513 0.6250 5.5625 0.8750
7514 0.6250 6.0625 0.8750
7515 0.6250 6.5625 0.8750
7516 0.6250 7.0625 0.8750
7517 0.6250 7.5625 0.8750
7518 0.6250 8.0625 0.8750
7610 0.7500 4.9375 1.0000
7611 0.7500 5.4375 1.0000
7612 0.7500 5.9375 1.0000
7613 0.7500 6.4375 1.0000
7614 0.7500 6.9375 1.0000
D-M-E PINS AND SLEEVES
6 - 24 Mold Base Library
7615 0.7500 7.4375 1.0000
7616 0.7500 7.9375 1.0000
7617 0.7500 8.4375 1.0000
7618 0.7500 8.9375 1.0000
7619 0.7500 9.4375 1.0000
InstanceName
GPin
Diameter
MOverallLength
HHead
Diameter
D-M-E PINS AND SLEEVES
Mold Base Library 6 - 25
SHOULDER LEADER PIN
Generic Part Name: SD_LD_PIN
InstanceName
NOMINALDIAMETER
GPin
Diameter
HShoulderDiameter
DHead
Diameter
AShoulderLength
BPin Length
A0707_GL 3/4 0.7490 1.1260 1.2280 0.8750 0.8750
A0713_GL 3/4 0.7490 1.1260 1.2280 0.8750 1.3750
A0717_GL 3/4 0.7490 1.1260 1.2280 0.8750 1.8750
A0723_GL 3/4 0.7490 1.1260 1.2280 0.8750 2.3750
A0727_GL 3/4 0.7490 1.1260 1.2280 0.8750 2.8750
A1307_GL 3/4 0.7490 1.1260 1.2280 1.3750 0.8750
A1313_GL 3/4 0.7490 1.1260 1.2280 1.3750 1.3750
A1317_GL 3/4 0.7490 1.1260 1.2280 1.3750 1.8750
A1323_GL 3/4 0.7490 1.1260 1.2280 1.3750 2.3750
A1327_GL 3/4 0.7490 1.1260 1.2280 1.3750 2.8750
A1333_GL 3/4 0.7490 1.1260 1.2280 1.3750 3.3750
A1707_GL 3/4 0.7490 1.1260 1.2280 1.8750 0.8750
A1713_GL 3/4 0.7490 1.1260 1.2280 1.8750 1.3750
A1717_GL 3/4 0.7490 1.1260 1.2280 1.8750 1.8750
A1723_GL 3/4 0.7490 1.1260 1.2280 1.8750 2.3750
A1727_GL 3/4 0.7490 1.1260 1.2280 1.8750 2.8750
A1733_GL 3/4 0.7490 1.1260 1.2280 1.8750 3.3750
A1737_GL 3/4 0.7490 1.1260 1.2280 1.8750 3.8750
D-M-E PINS AND SLEEVES
6 - 26 Mold Base Library
A2307_GL 3/4 0.7490 1.1260 1.2280 2.3750 0.8750
A2313_GL 3/4 0.7490 1.1260 1.2280 2.3750 1.3750
A2317_GL 3/4 0.7490 1.1260 1.2280 2.3750 1.8750
A2323_GL 3/4 0.7490 1.1260 1.2280 2.3750 2.3750
A2327_GL 3/4 0.7490 1.1260 1.2280 2.3750 2.8750
A2337_GL 3/4 0.7490 1.1260 1.2280 2.3750 3.8750
A2713_GL 3/4 0.7490 1.1260 1.2280 2.8750 1.3750
A2717_GL 3/4 0.7490 1.1260 1.2280 2.8750 1.8750
A2723_GL 3/4 0.7490 1.1260 1.2280 2.8750 2.3750
A2727_GL 3/4 0.7490 1.1260 1.2280 2.8750 2.8750
A2737_GL 3/4 0.7490 1.1260 1.2280 2.8750 3.8750
A3317_GL 3/4 0.7490 1.1260 1.2280 3.3750 1.8750
A3323_GL 3/4 0.7490 1.1260 1.2280 3.3750 2.3750
A3333_GL 3/4 0.7490 1.1260 1.2280 3.3750 3.3750
A3723_GL 3/4 0.7490 1.1260 1.2280 3.8750 2.3750
A3727_GL 3/4 0.7490 1.1260 1.2280 3.8750 2.8750
C0713_GL 1 0.9990 1.3760 1.5100 0.8750 1.3750
C0717_GL 1 0.9990 1.3760 1.5100 0.8750 1.8750
C0727_GL 1 0.9990 1.3760 1.5100 0.8750 2.8750
C1307_GL 1 0.9990 1.3760 1.5100 1.3750 0.8750
C1313_GL 1 0.9990 1.3760 1.5100 1.3750 1.3750
C1317_GL 1 0.9990 1.3760 1.5100 1.3750 1.8750
C1323_GL 1 0.9990 1.3760 1.5100 1.3750 2.3750
C1327_GL 1 0.9990 1.3760 1.5100 1.3750 2.8750
C1333_GL 1 0.9990 1.3760 1.5100 1.3750 3.3750
C1707_GL 1 0.9990 1.3760 1.5100 1.8750 0.8750
C1713_GL 1 0.9990 1.3760 1.5100 1.8750 1.3750
C1717_GL 1 0.9990 1.3760 1.5100 1.8750 1.8750
C1723_GL 1 0.9990 1.3760 1.5100 1.8750 2.3750
C1727_GL 1 0.9990 1.3760 1.5100 1.8750 2.8750
InstanceName
NOMINALDIAMETER
GPin
Diameter
HShoulderDiameter
DHead
Diameter
AShoulderLength
BPin Length
D-M-E PINS AND SLEEVES
Mold Base Library 6 - 27
C1733_GL 1 0.9990 1.3760 1.5100 1.8750 3.3750
C1737_GL 1 0.9990 1.3760 1.5100 1.8750 3.8750
C2313_GL 1 0.9990 1.3760 1.5100 2.3750 1.3750
C2317_GL 1 0.9990 1.3760 1.5100 2.3750 1.8750
C2323_GL 1 0.9990 1.3760 1.5100 2.3750 2.3750
C2327_GL 1 0.9990 1.3760 1.5100 2.3750 2.8750
C2333_GL 1 0.9990 1.3760 1.5100 2.3750 3.3750
C2337_GL 1 0.9990 1.3760 1.5100 2.3750 3.8750
C2713_GL 1 0.9990 1.3760 1.5100 2.8750 1.3750
C2717_GL 1 0.9990 1.3760 1.5100 2.8750 1.8750
C2723_GL 1 0.9990 1.3760 1.5100 2.8750 2.3750
C2727_GL 1 0.9990 1.3760 1.5100 2.8750 2.8750
C2733_GL 1 0.9990 1.3760 1.5100 2.8750 3.3750
C2737_GL 1 0.9990 1.3760 1.5100 2.8750 3.8750
C2743_GL 1 0.9990 1.3760 1.5100 2.8750 4.3750
C3317_GL 1 0.9990 1.3760 1.5100 3.3750 1.8750
C3323_GL 1 0.9990 1.3760 1.5100 3.3750 2.3750
C3327_GL 1 0.9990 1.3760 1.5100 3.3750 2.8750
C3333_GL 1 0.9990 1.3760 1.5100 3.3750 3.3750
C3343_GL 1 0.9990 1.3760 1.5100 3.3750 4.3750
C3723_GL 1 0.9990 1.3760 1.5100 3.8750 2.3750
C3727_GL 1 0.9990 1.3760 1.5100 3.8750 2.8750
C3737_GL 1 0.9990 1.3760 1.5100 3.8750 3.8750
C3747_GL 1 0.9990 1.3760 1.5100 3.8750 4.8750
C4327_GL 1 0.9990 1.3760 1.5100 4.3750 2.8750
C4337_GL 1 0.9990 1.3760 1.5100 4.3750 3.8750
C4343_GL 1 0.9990 1.3760 1.5100 4.3750 4.3750
C4737_GL 1 0.9990 1.3760 1.5100 4.8750 3.8750
C4743_GL 1 0.9990 1.3760 1.5100 4.8750 4.3750
C4747_GL 1 0.9990 1.3760 1.5100 4.8750 4.8750
InstanceName
NOMINALDIAMETER
GPin
Diameter
HShoulderDiameter
DHead
Diameter
AShoulderLength
BPin Length
D-M-E PINS AND SLEEVES
6 - 28 Mold Base Library
C5737_GL 1 0.9990 1.3760 1.5100 5.8750 3.8750
C5747_GL 1 0.9990 1.3760 1.5100 5.8750 4.8750
C5757_GL 1 0.9990 1.3760 1.5100 5.8750 5.8750
D1313_GL 1-1/4 1.2490 1.6260 1.7910 1.3750 1.3750
D1323_GL 1-1/4 1.2490 1.6260 1.7910 1.3750 2.3750
D1333_GL 1-1/4 1.2490 1.6260 1.7910 1.3750 3.3750
D1713_GL 1-1/4 1.2490 1.6260 1.7910 1.8750 1.3750
D1717_GL 1-1/4 1.2490 1.6260 1.7910 1.8750 1.8750
D1723_GL 1-1/4 1.2490 1.6260 1.7910 1.8750 2.3750
D1727_GL 1-1/4 1.2490 1.6260 1.7910 1.8750 2.8750
D1733_GL 1-1/4 1.2490 1.6260 1.7910 1.8750 3.3750
D1737_GL 1-1/4 1.2490 1.6260 1.7910 1.8750 3.8750
D2313_GL 1-1/4 1.2490 1.6260 1.7910 2.3750 1.3750
D2317_GL 1-1/4 1.2490 1.6260 1.7910 2.3750 1.8750
D2323_GL 1-1/4 1.2490 1.6260 1.7910 2.3750 2.3750
D2327_GL 1-1/4 1.2490 1.6260 1.7910 2.3750 2.8750
D2333_GL 1-1/4 1.2490 1.6260 1.7910 2.3750 3.3750
D2337_GL 1-1/4 1.2490 1.6260 1.7910 2.3750 3.8750
D2717_GL 1-1/4 1.2490 1.6260 1.7910 2.8750 1.8750
D2723_GL 1-1/4 1.2490 1.6260 1.7910 2.8750 2.3750
D2727_GL 1-1/4 1.2490 1.6260 1.7910 2.8750 2.8750
D2733_GL 1-1/4 1.2490 1.6260 1.7910 2.8750 3.3750
D2737_GL 1-1/4 1.2490 1.6260 1.7910 2.8750 3.8750
D2743_GL 1-1/4 1.2490 1.6260 1.7910 2.8750 4.3750
D3317_GL 1-1/4 1.2490 1.6260 1.7910 3.3750 1.8750
D3323_GL 1-1/4 1.2490 1.6260 1.7910 3.3750 2.3750
D3333_GL 1-1/4 1.2490 1.6260 1.7910 3.3750 2.8750
D3337_GL 1-1/4 1.2490 1.6260 1.7910 3.3750 3.3750
D3343_GL 1-1/4 1.2490 1.6260 1.7910 3.3750 4.3750
D3723_GL 1-1/4 1.2490 1.6260 1.7910 3.8750 2.3750
InstanceName
NOMINALDIAMETER
GPin
Diameter
HShoulderDiameter
DHead
Diameter
AShoulderLength
BPin Length
D-M-E PINS AND SLEEVES
Mold Base Library 6 - 29
D3727_GL 1-1/4 1.2490 1.6260 1.7910 3.8750 2.8750
D3733_GL 1-1/4 1.2490 1.6260 1.7910 3.8750 3.3750
D3737_GL 1-1/4 1.2490 1.6260 1.7910 3.8750 3.8750
D3747_GL 1-1/4 1.2490 1.6260 1.7910 3.8750 4.8750
D4327_GL 1-1/4 1.2490 1.6260 1.7910 4.3750 2.8750
D4333_GL 1-1/4 1.2490 1.6260 1.7910 4.3750 3.3750
D4337_GL 1-1/4 1.2490 1.6260 1.7910 4.3750 3.8750
D4347_GL 1-1/4 1.2490 1.6260 1.7910 4.3750 4.8750
D4737_GL 1-1/4 1.2490 1.6260 1.7910 4.8750 3.8750
D4743_GL 1-1/4 1.2490 1.6260 1.7910 4.8750 4.3750
D4747_GL 1-1/4 1.2490 1.6260 1.7910 4.8750 4.8750
D4757_GL 1-1/4 1.2490 1.6260 1.7910 4.8750 5.8750
D5737_GL 1-1/4 1.2490 1.6260 1.7910 5.8750 3.8750
D5743_GL 1-1/4 1.2490 1.6260 1.7910 5.8750 4.3750
D5747_GL 1-1/4 1.2490 1.6260 1.7910 5.8750 4.8750
D5757_GL 1-1/4 1.2490 1.6260 1.7910 5.8750 5.8750
InstanceName
NOMINALDIAMETER
GPin
Diameter
HShoulderDiameter
DHead
Diameter
AShoulderLength
BPin Length
D-M-E PINS AND SLEEVES
6 - 30 Mold Base Library
SPRUE PULLER PIN
Generic Part Name: SPRUE_PIN
InstanceName
GPin
Diameter
KHead
Thickness
MOverallLength
HHead
Diameter
7110 0.2500 0.1875 3.4375 0.4375
7111 0.2500 0.1875 3.9375 0.4375
7112 0.2500 0.1875 4.4375 0.4375
7113 0.2500 0.1875 4.9375 0.4375
7114 0.2500 0.1875 5.4375 0.4375
7115 0.2500 0.1875 5.9375 0.4375
7116 0.2500 0.1875 6.4375 0.4375
7210 0.3750 0.2500 3.8750 0.6250
7211 0.3750 0.2500 4.3750 0.6250
7212 0.3750 0.2500 4.8750 0.6250
7213 0.3750 0.2500 5.3750 0.6250
7214 0.3750 0.2500 5.8750 0.6250
7215 0.3750 0.2500 6.3750 0.6250
7216 0.3750 0.2500 6.8750 0.6250
7217 0.3750 0.2500 7.3750 0.6250
7218 0.3750 0.2500 7.8750 0.6250
7219 0.3750 0.2500 8.3750 0.6250
7220 0.3750 0.2500 8.8750 0.6250
7221 0.3750 0.2500 9.3750 0.6250
D-M-E PINS AND SLEEVES
Mold Base Library 6 - 31
THROUGH HARDENED EJECTOR PINS
Generic Part Name: HD_EJ_PIN
InstanceName
GPin
Diameter
HHead
Diameter
KHead
ThicknessCut D
LShoulderLength
CT5_M6 0.1250 0.2500 0.1250 Y 0.06 2.00
CT5_M6NS 0.0625 0.2500 0.1250 N NONE NONE
CT6_M6 0.1250 0.2500 0.1250 Y 0.08 2.00
CT6_M6NS 0.0781 0.2500 0.1250 N NONE NONE
CT7_M6 0.1250 0.2500 0.1250 Y 0.09 2.00
CT7_M6NS 0.0938 0.2500 0.1250 N NONE NONE
CT8_M6 0.1250 0.2500 0.1250 Y 0.11 2.00
CT8_M6NS 0.1094 0.2500 0.1250 N NONE NONE
CT9_M6 0.1250 0.2500 0.1250 N NONE NONE
CT11_M6 0.1563 0.2813 0.1563 N NONE NONE
Mold Base Library 7 - 1
D-M-E SPRUE BUSHINGS
SPRUE BUSHING OF A SERIES
Generic Part Name: A_SERIES
InstanceName
A R O
A_6600 1.1875 0.50 0.1562
A_6601 1.6875 0.50 0.1562
A_6602 2.1875 0.50 0.1562
A_6603 2.6875 0.50 0.1562
A_6604 3.1875 0.50 0.1562
A_6605 3.6875 0.50 0.1562
A_6606 4.1875 0.50 0.1562
A_6600A 1.1875 0.50 0.2188
A_6601A 1.6875 0.50 0.2188
A_6602A 2.1875 0.50 0.2188
A_6603A 2.6875 0.50 0.2188
A_6604A 3.1875 0.50 0.2188
A_6605A 3.6875 0.50 0.2188
12
D-M-E SPRUE BUSHINGS
7 - 2 Mold Base Library
A_6606A 4.1875 0.50 0.2188
A_6600B 1.1875 0.50 0.2813
A_6601B 1.6875 0.50 0.2813
A_6602B 2.1875 0.50 0.2813
A_6603B 2.6875 0.50 0.2813
A_6604B 3.1875 0.50 0.2813
A_6605B 3.6875 0.50 0.2813
A_6606B 4.1875 0.50 0.2813
A_6600C 1.1875 0.50 0.3438
A_6601C 1.6875 0.50 0.3438
A_6602C 2.1875 0.50 0.3438
A_6603C 2.6875 0.50 0.3438
A_6604C 3.1875 0.50 0.3438
A_6605C 3.6875 0.50 0.3438
A_6606C 4.1875 0.50 0.3438
A_6600R 1.1875 0.75 0.1562
A_6601R 1.6875 0.75 0.1562
A_6602R 2.1875 0.75 0.1562
A_6603R 2.6875 0.75 0.1562
A_6604R 3.1875 0.75 0.1562
A_6605R 3.6875 0.75 0.1562
A_6606R 4.1875 0.75 0.1562
A_6600AR 1.1875 0.75 0.2188
A_6601AR 1.6875 0.75 0.2188
A_6602AR 2.1875 0.75 0.2188
A_6603AR 2.6875 0.75 0.2188
A_6604AR 3.1875 0.75 0.2188
A_6605AR 3.6875 0.75 0.2188
A_6606AR 4.1875 0.75 0.2188
A_6600BR 1.1875 0.75 0.2813
InstanceName
A R O
D-M-E SPRUE BUSHINGS
Mold Base Library 7 - 3
A_6601BR 1.6875 0.75 0.2813
A_6602BR 2.1875 0.75 0.2813
A_6603BR 2.6875 0.75 0.2813
A_6604BR 3.1875 0.75 0.2813
A_6605BR 3.6875 0.75 0.2813
A_6606BR 4.1875 0.75 0.2813
A_6600CR 1.1875 0.75 0.3438
A_6601CR 1.6875 0.75 0.3438
A_6602CR 2.1875 0.75 0.3438
A_6603CR 2.6875 0.75 0.3438
A_6604CR 3.1875 0.75 0.3438
A_6605CR 3.6875 0.75 0.3438
A_6606CR 4.1875 0.75 0.3438
InstanceName
A R O
D-M-E SPRUE BUSHINGS
7 - 4 Mold Base Library
SPRUE BUSHING OF AR SERIES
Generic Part Name: AR_SERIES
InstanceName
A O
AR_6600 1.1875 0.1562
AR_6601 1.6875 0.1562
AR_6602 2.1875 0.1562
AR_6600A 1.1875 0.2188
AR_6601A 1.6875 0.2188
AR_6602A 2.1875 0.2188
°
D-M-E SPRUE BUSHINGS
Mold Base Library 7 - 5
SPRUE BUSHING OF B SERIES
Generic Part Name: B_SERIES
InstanceName
A O R
B6600 0.9062 0.1562 0.50
B6601 1.4062 0.1562 0.50
B6602 1.9062 0.1562 0.50
B6603 2.4062 0.1562 0.50
B6604 2.9062 0.1562 0.50
B6605 3.4062 0.1562 0.50
B6606 3.9062 0.1562 0.50
B6607 4.4062 0.1562 0.50
B6608 4.9062 0.1562 0.50
B6610 5.9062 0.1562 0.50
B6612 6.9062 0.1562 0.50
B6600A 0.9062 0.2188 0.50
B6601A 1.4062 0.2188 0.50
B6602A 1.9062 0.2188 0.50
B6603A 2.4062 0.2188 0.50
°
D-M-E SPRUE BUSHINGS
7 - 6 Mold Base Library
B6604A 2.9062 0.2188 0.50
B6605A 3.4062 0.2188 0.50
B6606A 3.9062 0.2188 0.50
B6607A 4.4062 0.2188 0.50
B6608A 4.9062 0.2188 0.50
B6610A 5.9062 0.2188 0.50
B6612A 6.9062 0.2188 0.50
B6600B 0.9062 0.2813 0.50
B6601B 1.4062 0.2813 0.50
B6602B 1.9062 0.2813 0.50
B6603B 2.4062 0.2813 0.50
B6604B 2.9062 0.2813 0.50
B6605B 3.4062 0.2813 0.50
B6606B 3.9062 0.2813 0.50
B6607B 4.4062 0.2813 0.50
B6608B 4.9062 0.2813 0.50
B6610B 5.9062 0.2813 0.50
B6612B 6.9062 0.2813 0.50
B6600C 0.9062 0.3438 0.50
B6601C 1.4062 0.3438 0.50
B6602C 1.9062 0.3438 0.50
B6603C 2.4062 0.3438 0.50
B6604C 2.9062 0.3438 0.50
B6605C 3.4062 0.3438 0.50
B6606C 3.9062 0.3438 0.50
B6607C 4.4062 0.3438 0.50
B6608C 4.9062 0.3438 0.50
B6610C 5.9062 0.3438 0.50
B6612C 6.9062 0.3438 0.50
B6600R 0.9062 0.1562 0.75
InstanceName
A O R
D-M-E SPRUE BUSHINGS
Mold Base Library 7 - 7
B6601R 1.4062 0.1562 0.75
B6602R 1.9062 0.1562 0.75
B6603R 2.4062 0.1562 0.75
B6604R 2.9062 0.1562 0.75
B6605R 3.4062 0.1562 0.75
B6606R 3.9062 0.1562 0.75
B6607R 4.4062 0.1562 0.75
B6608R 4.9062 0.1562 0.75
B6610R 5.9062 0.1562 0.75
B6612R 6.9062 0.1562 0.75
B6600AR 0.9062 0.2188 0.75
B6601AR 1.4062 0.2188 0.75
B6602AR 1.9062 0.2188 0.75
B6603AR 2.4062 0.2188 0.75
B6604AR 2.9062 0.2188 0.75
B6605AR 3.4062 0.2188 0.75
B6606AR 3.9062 0.2188 0.75
B6607AR 4.4062 0.2188 0.75
B6608AR 4.9062 0.2188 0.75
B6610AR 5.9062 0.2188 0.75
B6612AR 6.9062 0.2188 0.75
B6600BR 0.9062 0.2813 0.75
B6601BR 1.4062 0.2813 0.75
B6602BR 1.9062 0.2813 0.75
B6603BR 2.4062 0.2813 0.75
B6604BR 2.9062 0.2813 0.75
B6605BR 3.4062 0.2813 0.75
B6606BR 3.9062 0.2813 0.75
B6607BR 4.4062 0.2813 0.75
B6608BR 4.9062 0.2813 0.75
InstanceName
A O R
D-M-E SPRUE BUSHINGS
7 - 8 Mold Base Library
B6610BR 5.9062 0.2813 0.75
B6612BR 6.9062 0.2813 0.75
B6600CR 0.9062 0.3438 0.75
B6601CR 1.4062 0.3438 0.75
B6602CR 1.9062 0.3438 0.75
B6603CR 2.4062 0.3438 0.75
B6604CR 2.9062 0.3438 0.75
B6605CR 3.4062 0.3438 0.75
B6606CR 3.9062 0.3438 0.75
B6607CR 4.4062 0.3438 0.75
B6608CR 4.9062 0.3438 0.75
B6610CR 5.9062 0.3438 0.75
B6612CR 6.9062 0.3438 0.75
InstanceName
A O R
D-M-E SPRUE BUSHINGS
Mold Base Library 7 - 9
SPRUE BUSHING OF L SERIES
Generic Part Name: L_SERIES
InstanceName
A O
L6600 0.9062 0.1562
L6601 1.4062 0.1562
L6602 1.9062 0.1562
L6604 2.9062 0.1562
L6606 3.9062 0.1562
L6612 6.9062 0.1562
L6600A 0.9062 0.2188
L6601A 1.4062 0.2188
L6602A 1.9062 0.2188
L6604A 2.9062 0.2188
L6606A 3.9062 0.2188
L6612A 6.9062 0.2188
L6600B 0.9062 0.2813
L6601B 1.4062 0.2813
L6602B 1.9062 0.2813
°
D-M-E SPRUE BUSHINGS
7 - 10 Mold Base Library
L6604B 2.9062 0.2813
L6606B 3.9062 0.2813
L6612B 6.9062 0.2813
InstanceName
A O
D-M-E SPRUE BUSHINGS
Mold Base Library 7 - 11
SPRUE BUSHING OF LN SERIES
Generic Part Name: LN_SERIES
InstanceName
A O
LN6600 0.9062 0.1562
LN6601 1.4062 0.1562
LN6602 1.9062 0.1562
LN6603 2.4062 0.1562
LN6604 2.9062 0.1562
LN6605 3.4062 0.1562
LN6600A 0.9062 0.2188
LN6601A 1.4062 0.2188
LN6602A 1.9062 0.2188
LN6603A 2.4062 0.2188
LN6604A 2.9062 0.2188
LN6605A 3.4062 0.2188
LN6600B 0.9062 0.2813
LN6601B 1.4062 0.2813
LN6602B 1.9062 0.2813
LN6603B 2.4062 0.2813
D-M-E SPRUE BUSHINGS
7 - 12 Mold Base Library
LN6604B 2.9062 0.2813
LN6605B 3.4062 0.2813
InstanceName
A O
D-M-E SPRUE BUSHINGS
Mold Base Library 7 - 13
SPRUE BUSHING OF U SERIES
Generic Part Name: U_SERIES
InstanceName
A O R
U6600 0.9062 0.1562 0.50
U6601 1.4062 0.1562 0.50
U6602 1.9062 0.1562 0.50
U6603 2.4062 0.1562 0.50
U6604 2.9062 0.1562 0.50
U6600A 0.9062 0.2188 0.50
U6601A 1.4062 0.2188 0.50
U6602A 1.9062 0.2188 0.50
U6603A 2.4062 0.2188 0.50
U6604A 2.9062 0.2188 0.50
U6600B 0.9062 0.2813 0.50
U6601B 1.4062 0.2813 0.50
U6602B 1.9062 0.2813 0.50
U6603B 2.4062 0.2813 0.50
U6604B 2.9062 0.2813 0.50
D-M-E SPRUE BUSHINGS
7 - 14 Mold Base Library
U6600R 0.9062 0.1562 0.50
U6601R 1.4062 0.1562 0.75
U6602R 1.9062 0.1562 0.75
U6603R 2.4062 0.1562 0.75
U6604R 2.9062 0.1562 0.75
U6600AR 0.9062 0.2188 0.75
U6601AR 1.4062 0.218 0.75
U6602AR 1.9062 0.218 0.75
U6603Ar 2.4062 0.218 0.75
U6604AR 2.9062 0.218 0.75
U6600BR 0.9062 0.2813 0.75
U6601BR 1.4062 0.2813 0.75
U6602BR 1.9062 0.2813 0.75
U6603BR 2.4062 0.2813 0.75
U6604BR 2.9062 0.2813 0.75
InstanceName
A O R
D-M-E SPRUE BUSHINGS
Mold Base Library 7 - 15
SPRUE BUSHING OF UR SERIES
Generic Part Name: UR_SERIES
InstanceName
A O
UR6600 0.9062 0.1562
UR6601 1.4062 0.1562
UR6602 1.9062 0.1562
UR6603 2.4062 0.1562
UR6604 2.9062 0.1562
UR6600A 0.9062 0.2188
UR6601A 1.4062 0.2188
UR6602A 1.9062 0.2188
UR6603A 2.4062 0.2188
UR6604A 2.9062 0.2188
UR6600B 0.9062 0.2813
UR6601B 1.4062 0.2813
UR6602B 1.9062 0.2813
UR6603B 2.4062 0.2813
UR6604B 2.9062 0.2813
D-M-E SPRUE BUSHINGS
7 - 16 Mold Base Library
SPRUE BUSHING OF UV SERIES
Generic Part Name: UV_SERIES
InstanceName
A O
UV6600 0.9062 0.1562
UV6601 1.4062 0.1562
UV6602 1.9062 0.1562
UV6603 2.4062 0.1562
UV6604 2.9062 0.1562
UV6600A 0.9062 0.2188
UV6601A 1.4062 0.2188
UV6602A 1.9062 0.2188
UV6603A 2.4062 0.2188
UV6604A 2.9062 0.2188
UV6600B 0.9062 0.2813
UV6601B 1.4062 0.2813
UV6602B 1.9062 0.2813
UV6603B 2.4062 0.2813
UV6604B 2.9062 0.2813
Mold Base Library 8 - 1
1D-M-E METRIC MOLD BASE ASSEMBLIES
NAMING CONVENTIONS
Parts and assemblies in the MOLD BASE LIBRARY are namedaccording to the catalog order name. All dimensions are expressed inmillimeters.
Figure 8-1Metric Moldbase Assembly - Types N and SF
Assemblies of the metric mold bases include the following:
• Two clamping plates• Two molding plates (“A” and “B” plates)• One support plate• Two risers• One ejector retainer plate• One ejector plate
For each metric mold base size (except for 100x100 and 125x125),there are two generic mold bases, the N series and the SF series. The100x100 and 125x125 assemblies have only one generic each, whichis of the N series. Assembly type SF uses additional cuts for returnpins, sprue busings, locating ring, and sprue puller pin.
D-M-E METRIC MOLD BASE ASSEMBLIES
8 - 2 Mold Base Library
Names for generic assemblies indicate the series, or size, of theassembly and its type. For example, N_1616_N is an assembly of type“N” in the 156x156 directory.
Instance names for plates in the mold base assemblies are generallythe same as their corresponding catalog number in the D-M-ECompany’s catalog. Generally, hyphens and spaces have been omittedor changed to underscores to make the catalog numbers and instancenames valid for use in Pro/ENGINEER. The names of instances forassemblies of type “SF” were generated according to the namingconventions used in the D-M-E catalog, but do not correspond toactual catalog numbers.
Each generic part name indicates the size of the plate and which typeof plate the part is. For example, in N_1616_N, one of the genericassemblies in the 156x156 directory, the following generic plates arepresent:
• N1616CLAMP• N1616MOLD• N1616SUP• N1616RISER• N1616EJ• N1616RET
For example, for the part N011616_20 (the first instance of genericN1616CLAMP), the name can be broken up as follows:
• N—The type of moldbase• 01—The type of plate• 1616—The mold base series or size• 20—The thickness of the plate
Note that for the assemblies in the 100x100 directory (N_1010_N)and the 125x125 directory (N_1212_N), the names for base plates and“B” plates do not adhere to the conventions in the D-M-E catalog.These parts use slightly different names, and use a letter in place of thevalue for the plate thickness.
Remember that ejector plates and ejector retainer plates use a namingconvention that is slightly different from that of the other plates.
NOTE: You do not have to create a search path for these assembliesin the config.pro.
D-M-E METRIC MOLD BASE ASSEMBLIES
Mold Base Library 8 - 3
For example, for the part N5012_1616 (the instance of genericN1616EJ), the name can be broken up as follows:
• N—The type of mold base• 50—The type of plate• 12—The thickness of the plate• 1616—The mold base series or size
TABLE OF MOLD BASE SIZES
The following tables list all the mold base sizes. All dimensions areexpressed in millimeters. Unless otherwise specified, all the valuesare thicknesses.
D-M-E METRIC MOLD BASE ASSEMBLIES
8 - 4 Mold Base Library
100x100
COMPONENTSERIES
N SF
Top Clamping PlateThickness 12.00
N/A
Width N/A
“A” Plate16.00 to 46.00
“B” Plate
Support Plate 12.00
Riser Plate 26.00 to 46.00
Base Clamping PlateThickness 12.00
Width N/A
Ejector Plate 7.00
Ejector Retaining Plate 7.00
100x125
COMPONENTSERIES
N SF
Top Clamping PlateThickness 12.00
N/A
Width N/A
“A” Plate16.00 to 46.00
“B” Plate
Support Plate 16.00
Riser Plate 26.00 to 46.00
Base Clamping PlateThickness 12.00
Width 7.00
Ejector Plate 7.00
Ejector Retaining Plate 7.00
125x125, 125x156
COMPONENTSERIES
N SF
Top Clamping PlateThickness 16.00
Width 125.00 to 156.00
“A” Plate20.00 to 56.00
“B” Plate
Support Plate 20.00
Riser Plate 36.00 to 46.00
Base Clamping PlateThickness 16.00
Width 125.00 to 156.00
Ejector Plate 12.00
Ejector Retaining Plate 8.00
D-M-E METRIC MOLD BASE ASSEMBLIES
Mold Base Library 8 - 5
156x156, 156x196, 156x246
COMPONENTSERIES
N SF
Top Clamping PlateThickness 20.00
Width 156.00 to 196.00
“A” Plate17.00 to 76.00
“B” Plate
Support Plate 26.00
Riser Plate 46.00 to 66.00
Base Clamping PlateThickness 20.00
Width 156.00 to 196.00
Ejector Plate 12.00
Ejector Retaining Plate 10.00
196x196, 196x246, 196x296, 196x346, 196x396
COMPONENTSERIES
N SF
Top Clamping PlateThickness 26.00 to 27.00
Width 196.00 to 246.00
“A” Plate17.00 to 76.00
“B” Plate
Support Plate 36.00
Riser Plate 66.00 to 106.00
Base Clamping PlateThickness 26.00 to 27.00
Width 196.00 to 246.00
Ejector Plate 16.00
Ejector Retaining Plate 12.00
214x246
COMPONENTSERIES
N SF
Top Clamping PlateThickness 26.00 to 27.00
Width 214.00
“A” Plate17.00 to 86.00
“B” Plate
Support Plate 36.00
Riser Plate 66.00 to 106.00
Base Clamping PlateThickness 26.00 to 27.00
Width 214.00
Ejector Plate 16.00
Ejector Retaining Plate 12.00
D-M-E METRIC MOLD BASE ASSEMBLIES
8 - 6 Mold Base Library
246x246, 246x296, 246x346, 246x396, 246x496
COMPONENTSERIES
N SF
Top Clamping PlateThickness 26.00 to 27.00
Width 246.00 to 296.00
“A” Plate17.00 to 106.00
“B” Plate
Support Plate 36.00
Riser Plate 66.00 to 106.00
Base Clamping PlateThickness 26.00 to 27.00
Width 246.00 to 296.00
Ejector Plate 26.00
Ejector Retaining Plate 16.00
296x296, 296x346, 296x396, 296x446, 296x496, 296x546, 296x596
COMPONENTSERIES
N SF
Top Clamping PlateThickness 26.00 to 27.00
Width 296.00 to 346.00
“A” Plate17.00 to 146.00
“B” Plate
Support Plate 46.00
Riser Plate 66.00 to 106.00
Base Clamping PlateThickness 26.00 to 27.00
Width 296.00 to 346.00
Ejector Plate 26.00
Ejector Retaining Plate 16.00
346x346, 346x396, 346x446, 346x496, 346x596
COMPONENTSERIES
N SF
Top Clamping PlateThickness 26.00 to 27.00
Width 346.00 to 396.00
“A” Plate26.00 to 146.00
“B” Plate
Support Plate 46.00
Riser Plate 66.00 to 106.00
Base Clamping PlateThickness 26.00 to 27.00
Width 346.00 to 396.00
Ejector Plate 26.00
Ejector Retaining Plate 16.00
D-M-E METRIC MOLD BASE ASSEMBLIES
Mold Base Library 8 - 7
396x396, 396x446, 396x496, 396x596
COMPONENTSERIES
N SF
Top Clamping PlateThickness 36.00
Width 396.00 to 446.00
“A” Plate36.00 to 186.00
“B” Plate
Support Plate 56.00
Riser Plate 106.00 to 126.00
Base Clamping PlateThickness 36.00
Width 396.00 to 446.00
Ejector Plate 26.00
Ejector Retaining Plate 16.00
446x446, 446x496, 446x596, 446x696, 446x796
COMPONENTSERIES
N SF
Top Clamping PlateThickness 36.00
Width 446.00 to 496.00
“A” Plate36.00 to 206.00
“B” Plate
Support Plate 56.00
Riser Plate 106.00 to 126.00
Base Clamping PlateThickness 36.00
Width 446.00 to 496.00
Ejector Plate 26.00
Ejector Retaining Plate 20.00
496x496, 496x546, 496x596, 496x696, 496x796
COMPONENTSERIES
N SF
Top Clamping PlateThickness 36.00
Width 496.00 to 546.00
“A” Plate36.00 to 206.00
“B” Plate
Support Plate 56.00
Riser Plate 106.00 to 126.00
Base Clamping PlateThickness 36.00
Width 496.00 to 546.00
Ejector Plate 26.00
Ejector Retaining Plate 20.00
D-M-E METRIC MOLD BASE ASSEMBLIES
8 - 8 Mold Base Library
546x546, 546x596, 546x696, 546x796
COMPONENTSERIES
N SF
Top Clamping PlateThickness 36.00
Width 546.00 to 596.00
“A” Plate36.00 to 206.00
“B” Plate
Support Plate 56.00
Riser Plate 106.00 to 126.00
Base Clamping PlateThickness 36.00
Width 546.00 to 596.00
Ejector Plate 26.00
Ejector Retaining Plate 20.00
596x596, 596x696, 596x796, 596x896
COMPONENTSERIES
N SF
Top Clamping PlateThickness 36.00
Width 596.00
“A” Plate36.00 to 206.00
“B” Plate
Support Plate 56.00
Riser Plate 106.00 to 126.00
Base Clamping PlateThickness 36.00
Width 596.00
Ejector Plate 26.00
Ejector Retaining Plate 20.00
Mold Base Library 9 - 1
13D-M-E METRIC PINS AND SLEEVES
EJECTOR PIN, TYPE A AND AH
Generic Part Name: EJECT _PIN
Catalog naming convention:
Pin Typed1Pin
Diameter
LPin Length
AH 1.50 100 to 160
AH 1.60 40 to 200
AH 2.00 40 to 80
E 2.00 100 to 250
E 2.20 100 to 200
E 2.50 100 to 315
E 2.70 100 to 200
E 3.00 100 to 500
E 3.50 100 to 400
E 3.70 100 to 400
E 4.00 100 to 500
E 4.20 100 to 400
E 4.50 100 to 400
E 5.00 100 to 630
AH1,6 - 60
length (L)pin diameter (d1)pin type
D-M-E METRIC PINS AND SLEEVES
9 - 2 Mold Base Library
E 5.20 100 to 500
E 6.00 100 to 500
E 6.20 100 to 500
E 6.50 100 to 500
E 7.00 100 to 500
E 8.00 100 to 800
E 8.20 100 to 630
E 8.50 100 to 630
E 9.00 100 to 630
E 10.00 100 to 1000
E 10.20 100 to 630
E 10.50 100 to 630
E 11.00 100 to 630
E 12.00 100 to 630
E 12.20 100 to 400
E 12.50 100 to 800
E 14.00 100 to 1000
E 16.00 100 to 1000
E 18.00 100 to 630
E 20.00 100 to 800
E 25.00 200 to 800
E 32.00 200 to 1000
Pin Typed1Pin
Diameter
LPin Length
D-M-E METRIC PINS AND SLEEVES
Mold Base Library 9 - 3
EJECTOR SLEEVE, TYPE S
Generic Part Name: EJ_SLEEVE
Catalog naming convention:
Instance Name hole_dia pin_dia length
S24-length 2.000 4.000 75 to 150
S224-length 2.200 4.000 75 to 150
S255-length 2.500 5.000 75 to 150
S275-length 2.700 5.000 75 to 150
S35-length 3.000 5.000 7 to 175
S325-length 3.200 5.000 75 to 175
S356-length 3.500 6.000 75 to 175
S376-length 3.700 6.000 75 to 175
S46-length 4.000 6.000 75 to 200
S428-length 4.200 8.000 75 to 200
S58-length 5.000 8.000 75 to 200
S528-length 5.200 8.000 75 to 200
S610-length 6.000 10.000 75 to 250
S6210-length 6.200 10.000 75 to 250
S812-length 8.000 12.000 75 to 275
S8212-length 8.200 12.000 75 to 275
S1014-length 10.000 14.000 100 to 275
S10214-length 10.200 14.000 100 to 275
S1216-length 12.000 16.000 100 to 225
S24-75
lengthpin diameterpin type
hole diameter
D-M-E METRIC PINS AND SLEEVES
9 - 4 Mold Base Library
LEADER PIN, TYPE FSN
Generic Part Name: PIN_FSN
Notes
1. In the catalog name, replace “B” with the corresponding dimension.
Catalog naming convention:
SeriesCatalogName
pin_diaA
ShoulderLength
BThreadLength
shoulder_dia
head_dia
10 FSN9-16-B 9.00 16.00 26 to 86 14.00 16.00
10 FSN9-20-B 9.00 20.00 26 to 46 14.00 16.00
10 FSN9-26-B 9.00 26.00 26 to 46 14.00 16.00
10 FSN9-36-B 9.00 36.00 26 to 46 14.00 16.00
10 FSN9-46-B 9.00 46.00 26 to 46 14.00 16.00
10 FSN10-16-B 10.00 16.00 26 to 86 14.00 16.00
10 FSN10-20-B 10.00 20.00 26 to 46 14.00 16.00
10 FSN10-26-B 10.00 26.00 26 to 46 14.00 16.00
10 FSN10-36-B 10.00 36.00 26 to 46 14.00 16.00
10 FSN10-46-B 10.00 46.00 26 to 46 14.00 16.00
FSN10-16-26
Bpin diameterpin type A
D-M-E METRIC PINS AND SLEEVES
Mold Base Library 9 - 5
12 FSN11-20-B 11.00 20.00 20 to 66 18.00 22.00
12 FSN11-26-B 11.00 26.00 26 to 56 18.00 22.00
12 FSN11-36-B 11.00 36.00 36 to 56 18.00 22.00
12 FSN11-46-B 11.00 46.00 46 to 66 18.00 22.00
12 FSN11-56-B 11.00 56.00 36 to 56 18.00 22.00
12 FSN12-20-B 12.00 20.00 20 to 66 18.00 22.00
12 FSN12-26-B 12.00 26.00 26 to 56 18.00 22.00
12 FSN12-36-B 12.00 36.00 36 to 56 18.00 22.00
12 FSN12-46-B 12.00 46.00 46 to 66 18.00 22.00
12 FSN12-56-B 12.00 56.00 36 to 56 18.00 22.00
16 FSN15-26-B 15.00 26.00 26 to 106 24.00 28.00
16 FSN15-36-B 15.00 36.00 26 to 66 24.00 28.00
16 FSN15-46-B 15.00 46.00 36 to 76 24.00 28.00
16 FSN15-56-B 15.00 56.00 36 to 76 24.00 28.00
16 FSN15-66-B 15.00 66.00 46 to 76 24.00 28.00
16 FSN15-76-B 15.00 76.00 56 to 86 24.00 28.00
16 FSN16-26-B 16.00 26.00 26 to 106 24.00 28.00
16 FSN16-36-B 16.00 36.00 26 to 66 24.00 28.00
16 FSN16-46-B 16.00 46.00 36 to 76 24.00 28.00
16 FSN16-56-B 16.00 56.00 36 to 76 24.00 28.00
16 FSN16-66-B 16.00 66.00 46 to 76 24.00 28.00
16 FSN16-76-B 16.00 76.00 56 to 86 24.00 28.00
20 and 22 FSN19-26-B 19.00 26.00 26 to 106 28.00 32.00
20 and 22 FSN19-36-B 19.00 36.00 26 to 106 28.00 32.00
20 and 22 FSN19-46-B 19.00 46.00 36 to 126 28.00 32.00
20 and 22 FSN19-56-B 19.00 56.00 36 to 86 28.00 32.00
20 and 22 FSN19-66-B 19.00 66.00 46 to 86 28.00 32.00
20 AND 22 FSN19-76-B 19.00 76.00 56 to 96 28.00 32.00
20 and 22 FSN19-86-B 19.00 86.00 66 to 86 28.00 32.00
SeriesCatalogName
pin_diaA
ShoulderLength
BThreadLength
shoulder_dia
head_dia
D-M-E METRIC PINS AND SLEEVES
9 - 6 Mold Base Library
20 and 22 FSN20-26-B 20.00 26.00 26 to 106 28.00 32.00
20 and 22 FSN20-36-B 20.00 36.00 26 to 106 28.00 32.00
20 and 22 FSN20-46-B 20.00 46.00 36 to 126 28.00 32.00
20 and 22 FSN20-56-B 20.00 56.00 36 to 86 28.00 32.00
20 and 22 FSN20-66-B 20.00 66.00 46 to 86 28.00 32.00
20 and 22 FSN20-76-B 20.00 76.00 56 to 96 28.00 32.00
20 and 22 FSN20-86-B 20.00 86.00 66 to 86 28.00 32.00
25 to 35 FSN23-26-B 23.00 26.00 26 to 106 32.00 36.00
25 to 35 FSN23-36-B 23.00 36.00 26 to 126 32.00 36.00
25 to 35 FSN23-46-B 23.00 46.00 46 to 106 32.00 36.00
25 to 35 FSN23-56-B 23.00 56.00 36 to 96 32.00 36.00
25 to 35 FSN23-66-B 23.00 66.00 46 to 106 32.00 36.00
25 to 35 FSN23-76-B 23.00 76.00 56 to 96 32.00 36.00
25 to 35 FSN23-86-B 23.00 86.00 66 to 106 32.00 36.00
25 to 35 FSN23-96-B 23.00 96.00 56 to 96 32.00 36.00
25 to 35 FSN23-106-B 23.00 106.00 56 to 86 32.00 36.00
25 to 35 FSN24-26-B 24.00 26.00 26 to 106 32.00 36.00
25 to 35 FSN24-36-B 24.00 36.00 26 to 126 32.00 36.00
25 to 35 FSN24-46-B 24.00 46.00 46 to 106 32.00 36.00
25 to 35 FSN24-56-B 24.00 56.00 36 to 96 32.00 36.00
25 to 35 FSN24-66-B 24.00 66.00 46 to 106 32.00 36.00
25 to 35 FSN24-76-B 24.00 76.00 56 to 96 32.00 36.00
25 to 35 FSN24-86-B 24.00 86.00 66 to 106 32.00 36.00
25 to 35 FSN24-96-B 24.00 96.00 56 to 96 32.00 36.00
25 to 35 FSN24-106-B 24.00 106.00 56 to 86 32.00 36.00
40 to 55 FSN33-36-B 33.00 36.00 46 to 126 42.00 46.00
40 to 55 FSN33-56-B 33.00 56.00 56 to 126 42.00 46.00
40 to 55 FSN33-76-B 33.00 76.00 66 to 146 42.00 46.00
40 to 55 FSN33-96-B 33.00 96.00 66 to 146 42.00 46.00
SeriesCatalogName
pin_diaA
ShoulderLength
BThreadLength
shoulder_dia
head_dia
D-M-E METRIC PINS AND SLEEVES
Mold Base Library 9 - 7
40 to 55 FSN33-106-B 33.00 106.00 56 to 146 42.00 46.00
40 to 55 FSN33-126-B 33.00 126.00 56 to 146 42.00 46.00
40 to 55 FSN33-146-B 33.00 146.00 56 to 106 42.00 46.00
40 to 55 FSN34-36-B 34.00 36.00 46 to 126 42.00 46.00
40 to 55 FSN34-56-B 34.00 56.00 56 to 126 42.00 46.00
40 to 55 FSN34-76-B 34.00 76.00 66 to 146 42.00 46.00
40 to 55 FSN34-96-B 34.00 96.00 66 to 146 42.00 46.00
40 to 55 FSN34-106-B 34.00 106.00 56 to 146 42.00 46.00
40 to 55 FSN34-126-B 34.00 126.00 56 to 146 42.00 46.00
40 to 55 FSN34-146-B 34.00 146.00 56 to 106 42.00 46.00
60 FSN41-36-B 41.00 36.00 56 to 126 50.00 54.00
60 FSN41-56-B 41.00 56.00 76 to 126 50.00 54.00
60 FSN41-76-B 41.00 76.00 76 to 146 50.00 54.00
60 FSN41-96-B 41.00 96.00 76 to 146 50.00 54.00
60 FSN41-106-B 41.00 106.00 76 to 146 50.00 54.00
60 FSN41-126-B 41.00 126.00 86 to 146 50.00 54.00
60 FSN41-146-B 41.00 146.00 76 to 146 50.00 54.00
60 FSN42-36-B 42.00 36.00 56 to 126 50.00 54.00
60 FSN42-56-B 42.00 56.00 76 to 126 50.00 54.00
60 FSN42-76-B 42.00 76.00 76 to 146 50.00 54.00
60 FSN42-96-B 42.00 96.00 76 to 146 50.00 54.00
60 FSN42-106-B 42.00 106.00 76 to 146 50.00 54.00
60 FSN42-126-B 42.00 126.00 86 to 146 50.00 54.00
60 FSN42-146-B 42.00 146.00 76 to 146 50.00 54.00
50 to 60 FSN49-96-B 49.00 96.00 96 60.00 64.00
50 to 60 FSN49-96-B 49.00 96.00 126 to 186 60.00 64.00
50 to 60 FSN49-106-B 49.00 106.00 96 to 186 60.00 64.00
50 to 60 FSN49-126-B 49.00 126.00 96 to 146 60.00 64.00
50 to 60 FSN49-146-B 49.00 146.00 106 to 146 60.00 64.00
SeriesCatalogName
pin_diaA
ShoulderLength
BThreadLength
shoulder_dia
head_dia
D-M-E METRIC PINS AND SLEEVES
9 - 8 Mold Base Library
50 to 60 FSN49-166-B 49.00 166.00 166 60.00 64.00
50 to 60 FSN49-186-B 49.00 186.00 186 60.00 64.00
50 to 60 FSN49-206-B 49.00 206.00 206 60.00 64.00
50 to 60 FSN50-96-B 50.00 96.00 96 to 126 60.00 64.00
50 to 60 FSN50-106-B 50.00 106.00 96 to 186 60.00 64.00
50 to 60 FSN50-126-B 50.00 126.00 96 to 146 60.00 64.00
50 to 60 FSN50-146-B 50.00 146.00 106 to 146 60.00 64.00
50 to 60 FSN50-166-B 50.00 166.00 166 60.00 64.00
50 to 60 FSN50-186-B 50.00 186.00 186 60.00 64.00
50 to 60 FSN50-206-B 50.00 206.00 206 60.00 64.00
SeriesCatalogName
pin_diaA
ShoulderLength
BThreadLength
shoulder_dia
head_dia
D-M-E METRIC PINS AND SLEEVES
Mold Base Library 9 - 9
LEADER PIN, TYPE FSC
Generic Part Name: PIN_FSC
Notes
1. In the catalog name, replace “B” with the corresponding dimension.
Catalog naming convention:
SeriesCatalogName
pin_diaA B Shoulder
Diameter
dHead
Diameter
10 FSC9-16-B 9.000 16.0000 20 to 66 14.000 16.000
10 FSC9-20-B 9.000 20.000 26 to 86 14.000 16.000
10 FSC9-26-B 9.000 26.000 36 to 56 14.000 16.000
10 FSC9-36-B 9.000 36.000 26 to 46 14.000 16.000
10 FSC9-46-B 9.000 46.000 36 14.000 16.000
10 FSC10-16-B 10.000 16.000 20 to 66 14.000 16.000
10 FSC10-20-B 10.000 20.000 26 to 86 14.000 16.000
10 FSC10-26-B 10.000 26.000 36 to 56 14.000 16.000
10 FSC10-36-B 10.000 36.000 26 to 46 14.000 16.000
10 FSC10-46-B 10.000 46.000 36 14.000 16.000
FSC10-16-26
Bpin diameterpin type A
D-M-E METRIC PINS AND SLEEVES
9 - 10 Mold Base Library
12 FSC11-20-B 11.000 20.000 20 to 66 18.000 22.000
12 FSC11-20-B 11.000 20.000 66 18.000 22.000
12 FSC11-26-B 11.000 26.000 26 to 96 18.000 22.000
12 FSC11-36-B 11.000 36.000 36 to 86 18.000 22.000
12 FSC11-46-B 11.000 46.000 46 to 66 18.000 22.000
12 FSC11-56-B 11.000 56.000 36 to 56 18.000 22.000
12 FSC12-20-B 12.000 20.000 20 to 66 18.000 22.000
12 FSC12-26-B 12.000 26.000 26 to 96 18.000 22.000
12 FSC12-36-B 12.000 36.000 36 to 86 18.000 22.000
12 FSC12-46-B 12.000 46.000 46 to 66 18.000 22.000
12 FSC12-56-B 12.000 56.000 36 to 56 18.000 22.000
16 FSC15-26-B 15.000 26.000 26 to 146 24.000 28.000
16 FSC15-36-B 15.000 36.000 26 to 126 24.000 28.000
16 FSC15-46-B 15.000 46.000 36 to 76 24.000 28.000
16 FSC15-56-B 15.000 56.000 36 to 76 24.000 28.000
16 FSC15-66-B 15.000 66.000 46 to 76 24.000 28.000
16 FSC15-76-B 15.000 76.000 56 to 86 24.000 28.000
16 FSC16-26-B 16.000 26.000 26 to 146 24.000 28.000
16 FSC16-36-B 16.000 36.000 26 to 126 24.000 28.000
16 FSC16-46-B 16.000 46.000 36 to 76 24.000 28.000
16 FSC16-56-B 16.000 56.000 36 to 76 24.000 28.000
16 FSC16-66-B 16.000 66.000 46 to 76 24.000 28.000
16 FSC16-76-B 16.000 76.000 56 to 86 24.000 28.000
20 and 22 FSC19-26-B 19.000 26.000 26 to 186 28.000 32.000
20 and 22 FSC19-36-B 19.000 36.000 26 to 186 28.000 32.000
20 and 22 FSC19-46-B 19.000 46.000 36 to 166 28.000 32.000
20 and 22 FSC19-56-B 19.000 56.000 36 to 126 28.000 32.000
20 and 22 FSC19-66-B 19.000 66.000 46 to 86 28.000 32.000
20 and 22 FSC19-76-B 19.000 76.000 56 to 96 28.000 32.000
SeriesCatalogName
pin_diaA B Shoulder
Diameter
dHead
Diameter
D-M-E METRIC PINS AND SLEEVES
Mold Base Library 9 - 11
20 AND 22 FSC19-86-B 19.000 86.000 66 to 86 28.000 32.000
20 AND 22 FSC20-26-B 20.000 26.000 26 to 186 28.000 32.000
20 AND 22 FSC20-36-B 20.000 36.000 26 to 186 28.000 32.000
20 AND 22 FSC20-46-B 20.000 46.000 36 to 166 28.000 32.000
20 AND 22 FSC20-56-B 20.000 56.000 36 to 126 28.000 32.000
20 AND 22 FSC20-66-B 20.000 66.000 46 to 86 28.000 32.000
20 AND 22 FSC20-76-B 20.000 76.000 56 to 96 28.000 32.000
20 AND 22 FSC20-86-B 20.000 86.000 66 to 86 28.000 32.000
25 to 35 FSC23-26-B 23.000 26.000 26 to 206 32.000 36.000
25 to 35 FSC23-36-B 23.000 36.000 26 to 206 32.000 36.000
25 to 35 FSC23-46-B 23.000 46.000 46 to 206 32.000 36.000
25 to 35 FSC23-56-B 23.000 56.000 36 to 246 32.000 36.000
25 to 35 FSC23-66-B 23.000 66.000 46 to 106 32.000 36.000
25 to 35 FSC23-76-B 23.000 76.000 56 to 96 32.000 36.000
25 to 35 FSC23-86-B 23.000 86.000 66 to 106 32.000 36.000
25 to 35 FSC23-96-B 23.000 96.000 56 to 126 32.000 36.000
25 to 35 FSC23-106-B 23.000 106.000 86 to 146 32.000 36.000
25 to 35 FSC23-126-B 23.000 126.000 126 to 146 32.000 36.000
25 to 35 FSC23-146-B 23.000 146.000 146 32.000 36.000
25 to 35 FSC24-26-B 24.000 26.000 26 to 206 32.000 36.000
25 to 35 FSC24-36-B 24.000 36.000 26 to 206 32.000 36.000
25 to 35 FSC24-46-B 24.000 46.000 46 to 206 32.000 36.000
25 to 35 FSC24-56-B 24.000 56.000 36 to 246 32.000 36.000
25 to 35 FSC24-66-B 24.000 66.000 46 to 106 32.000 36.000
25 to 35 FSC24-76-B 24.000 76.000 56 to 96 32.000 36.000
25 to 35 FSC24-86-B 24.000 86.000 66 to 106 32.000 36.000
25 to 35 FSC24-96-B 24.000 96.000 56 to 126 32.000 36.000
25 to 35 FSC24-106-B 24.000 106.000 86 to 146 32.000 36.000
25 to 35 FSC24-126-B 24.000 126.000 126 to 146 32.000 36.000
SeriesCatalogName
pin_diaA B Shoulder
Diameter
dHead
Diameter
D-M-E METRIC PINS AND SLEEVES
9 - 12 Mold Base Library
25 to 35 FSC24-146-B 24.000 146.000 146 32.000 36.000
40 to 55 FSC33-36-B 33.000 36.000 46 to 246 42.000 46.000
40 to 55 FSC33-56-B 33.000 56.000 66 to 246 42.000 46.000
40 to 55 FSC33-76-B 33.000 76.000 66 to 146 42.000 46.000
40 to 55 FSC33-96-B 33.000 96.000 66to 146 42.000 46.000
40 to 55 FSC33-106-B 33.000 106.000 76 to 146 42.000 46.000
40 to 55 FSC33-126-B 33.000 126.000 86 to 146 42.000 46.000
40 to 55 FSC33-146-B 33.000 146.000 86 to 166 42.000 46.000
40 to 55 FSC33-166-B 33.000 166.000 166 42.000 46.000
40 to 55 FSC33-186-B 33.000 186.000 186 42.000 46.000
40 to 55 FSC33-206-B 33.000 206.000 206 42.000 46.000
40 to 55 FSC34-36-B 34.000 36.000 46 to 246 42.000 46.000
40 to 55 FSC34-56-B 34.000 56.000 66 to 246 42.000 46.000
40 to 55 FSC34-76-B 34.000 76.000 66 to 146 42.000 46.000
40 to 55 FSC34-96-B 34.000 96.000 66 to 146 42.000 46.000
40 to 55 FSC34-106-B 34.000 106.000 76 to 146 42.000 46.000
40 to 55 FSC34-126-B 34.000 126.000 86 to 146 42.000 46.000
40 to 55 FSC34-146-B 34.000 146.000 86 to 166 42.000 46.000
40 to 55 FSC34-166-B 34.000 166.000 166 42.000 46.000
40 to 55 FSC34-186-B 34.000 186.000 186 42.000 46.000
40 to 55 FSC34-206-B 34.000 206.000 206 42.000 46.000
60 FSC41-36-B 41.000 36.000 56 to 166 50.000 54.000
60 FSC41-76-B 41.000 76.000 96 to 146 50.000 54.000
60 FSC41-96-B 41.000 96.000 76 to 146 50.000 54.000
60 FSC41-106-B 41.000 106.000 96 to 146 50.000 54.000
60 FSC41-126-B 41.000 126.000 86 to 146 50.000 54.000
60 FSC41-146-B 41.000 146.000 96 to 146 50.000 54.000
60 FSC41-166-B 41.000 166.000 166 50.000 54.000
60 FSC41-186-B 41.000 186.000 186 50.000 54.000
SeriesCatalogName
pin_diaA B Shoulder
Diameter
dHead
Diameter
D-M-E METRIC PINS AND SLEEVES
Mold Base Library 9 - 13
60 FSC41-206-B 41.000 206.000 206 50.000 54.000
60 FSC42-36-B 42.000 36.000 56 to 126 50.000 54.000
60 FSC42-56-B 42.000 56.000 76 to 166 50.000 54.000
60 FSC42-76-B 42.000 76.000 96 to 146 50.000 54.000
60 FSC42-96-B 42.000 96.000 76 to 146 50.000 54.000
60 FSC42-106-B 42.000 106.000 96 to 146 50.000 54.000
60 FSC42-126-B 42.000 126.000 86 to 146 50.000 54.000
60 FSC42-146-B 42.000 146.000 96 to 146 50.000 54.000
60 FSC42-166-B 42.000 166.000 166 50.000 54.000
60 FSC42-186-B 42.000 186.000 186 50.000 54.000
60 FSC42-206-B 42.000 206.000 206 50.000 54.000
SeriesCatalogName
pin_diaA B Shoulder
Diameter
dHead
Diameter
D-M-E METRIC PINS AND SLEEVES
9 - 14 Mold Base Library
LEADER PIN BUSHING, TYPE FBC
Generic Part Name: PIN_FBC
Notes
1. In the catalog name, replace “L” with the corresponding bushing length dimension.
Catalog naming convention:
SeriesCatalogName
hole_dia bush_length bush_dia
10 FBC9-L 9.00 16 to 46 14.00
10 FBC10-L 10.00 16 to 46 14.00
12 FBC11-L 11.00 20 to 56 18.00
12 FBC12-L 12.00 20 to 56 18.00
16 FBC15-L 15.00 16 to 76 24.00
16 FBC16-L 16.00 16 to 76 24.00
20 and 22 FBC19-L 19.00 26 to 86 28.00
20 and 22 FBC20-L 20.00 26 to 86 28.00
25 to 35 FBC23-L 23.00 26 to 146 32.00
25 to 35 FBC24-L 24.00 26 to 416 32.00
40 to 55 FBC33-L 33.00 36 to 206 42.00
40 to 55 FBC34-L 34.00 36 to 206 42.00
FBC10-16
hole diameterpin type bushing length
D-M-E METRIC PINS AND SLEEVES
Mold Base Library 9 - 15
60 FBC41-L 41.00 36 to 206 50.00
60 FBC42-L 42.00 36 to 206 50.00
SeriesCatalogName
hole_dia bush_length bush_dia
D-M-E METRIC PINS AND SLEEVES
9 - 16 Mold Base Library
LEADER PIN BUSHING, TYPE FBN
Generic Part Name: PIN_FBN
Notes
1. In the catalog name, replace “L” with the corresponding bushing length dimension.
Catalog naming convention:
SeriesCatalogNamea hole_dia bush_length bush_dia
10 FBN9-L 9.000 16 to 46 14.000
10 FBN10-L 10.000 16 to 46 14.000
12 FBN11-L 11.000 20 to 56 18.000
12 FBN12-L 12.000 20 to 56 18.000
16 FBN15-L 15.000 16 to 76 24.000
16 FBN16-L 16.000 16 to 76 24.000
20 FBN19-L 19.000 17 to 86 28.000
20 FBN20-L 20.000 17 to 86 28.000
25 FBN23-L 23.000 17 to 106 32.000
25 FBN24-L 24.000 17 to 106 32.000
40 FBN33-L 33.000 26 to 146 42.000
40 FBN34-L 34.000 26 to 146 42.000
FBN10-16
hole diameterpin type bushing length
D-M-E METRIC PINS AND SLEEVES
Mold Base Library 9 - 17
60 FBN41-L 41.000 36 to 146 50.000
60 FBN42-L 42.000 36 to 146 50.000
60 FBN49-L 49.000 96 to 206 60.000
60 FBN50-L 50.000 96 to 206 60.000
SeriesCatalogNamea hole_dia bush_length bush_dia
Mold Base Library 10 - 1
D-M-E METRIC LOCATING RINGS
LOCATING RING WITH FLANGE, TYPE R, SERIES 20 TO 60
Generic Part Name: RING_R1
CatalogName
Series ring_diaundercut_
diahole_dia
R101 20 to 60 100.00 50.00 40.00
R100 20 to 60 100.00 38.00 32.00
R111 20 to 60 110.00 50.00 40.00
R110 20 to 60 110.00 38.00 32.00
R121 20 to 60 120.00 50.00 40.00
R120 20 to 60 120.00 38.00 32.00
R126 20 to 60 125.00 50.00 40.00
R125 20 to 60 125.00 38.00 32.00
R151 20 to 60 150.00 50.00 40.00
R150 20 to 60 150.00 38.00 32.00
R161 20 to 60 160.00 50.00 40.00
R160 20 to 60 160.00 38.00 32.00
R176 20 to 60 175.00 50.00 40.00
R175 20 to 60 175.00 38.00 32.00
R201 20 to 60 200.00 50.00 40.00
R200 20 to 60 200.00 38.00 32.00
R251 20 to 60 250.00 50.00 40.00
R250 20 to 60 250.00 38.00 32.00
13
D-M-E METRIC LOCATING RINGS
10 - 2 Mold Base Library
LOCATING RING WITHOUT FLANGE, TYPE R, SERIES 20 TO 60
Generic Part Name: RING_R2
CatalogName
Seriesundercut_
diahole_dia ring_dia
R95 20 50.000 40.000 90.00
R96 20 38.000 32.000 90.00
D-M-E METRIC LOCATING RINGS
Mold Base Library 10 - 3
LOCATING RING WITHOUT FLANGE, TYPE R, SERIES 16
Generic Part Name: RING_R3
InstanceName
Series ring_dia ring_thick
R90 16 90.000 8.000
D-M-E METRIC LOCATING RINGS
10 - 4 Mold Base Library
LOCATING RING WITH FLANGE, TYPE RB, SERIES 16 TO 60
Generic Part Name: RING_RB1
CatalogName
Series ring_dia
RB100-12 16 to 60 100.00
RB110-12 16 to 60 110.00
RB120-12 16 to 60 120.00
RB125-12 16 to 60 125.00
RB150-12 16 to 60 150.00
RB160-12 16 to 60 160.00
RB175-12 16 to 60 175.00
RB200-12 16 to 60 200.00
RB250-12 16 to 60 250.00
D-M-E METRIC LOCATING RINGS
Mold Base Library 10 - 5
LOCATING RING WITHOUT FLANGE, TYPE RB, SERIES 12 TO 60
Generic Part Name: RING_RB2
CatalogName
Series ring_dia ring_thick
RB60-8 12 to 60 60.000 8.000
RB60-12 12 to 60 90.000 12.000
Mold Base Library 11 - 1
13D-M-E METRIC SPRUE BUSHINGS
SPRUE BUSHINGS, TYPE AG, AGK, AGM AND AGN
Generic Part Name: BUSHING_AG
InstanceName
Series Catalog NameL
Length
DHead
Diameter
d2Thread
Diameter
L1Head
Height
AG001 12 AGK20-2,5-0 20.00 28.00 12.00 16.00
AG002 12 AGK26-2,5-0 26.00 28.00 12.00 16.00
AG003 12 AGK46-2,5-0 46.00 28.00 12.00 16.00
AG004 12 AGK20-2,5-15,5 20.00 28.00 12.00 16.00
AG005 12 AGK26-2,5-15,5 26.00 28.00 12.00 16.00
AG006 12 AGK46-2,5-15,5 46.00 28.00 12.00 16.00
AG007 12 AGK20-3,5-0 20.00 28.00 12.00 16.00
AG008 12 AGK26-3,5-0 26.00 28.00 12.00 16.00
AG009 12 AGK36-3,5-0 36.00 28.00 12.00 16.00
AG010 12 AGK46-3,5-0 46.00 28.00 12.00 16.00
AG011 12 AGK56-3,5-0 56.00 28.00 12.00 16.00
AG012 12 AGK20-3,5-15,5 20.00 28.00 12.00 16.00
AG013 12 AGK26-3,5-15,5 26.00 28.00 12.00 16.00
AG014 12 AGK36-3,5-15,5 36.00 28.00 12.00 16.00
AG015 12 AGK46-3,5-15,5 46.00 28.00 12.00 16.00
AG016 12 AGK56-3,5-15,5 56.00 28.00 12.00 16.00
AG017 16 AGN26-2,5-0 26.00 38.00 18.00 20.00
D-M-E METRIC SPRUE BUSHINGS
11 - 2 Mold Base Library
AG018 16 AGN46-2,5-0 46.00 38.00 18.00 20.00
AG019 16 AGN26-2,5-15,5 26.00 38.00 18.00 20.00
AG020 16 AGN46-2,5-15,5 46.00 38.00 18.00 20.00
AG021 16 AGN26-2,5-40 26.00 38.00 18.00 20.00
AG022 16 AGN46-2,5-40 46.00 38.00 18.00 20.00
AG023 16 AGN26-3,5-0 26.00 38.00 18.00 20.00
AG024 16 AGN36-3,5-0 36.00 38.00 18.00 20.00
AG025 16 AGN46-3,5-0 46.00 38.00 18.00 20.00
AG026 16 AGN56-3,5-0 56.00 38.00 18.00 20.00
AG027 16 AGN66-3,5-0 66.00 38.00 18.00 20.00
AG028 16 AGN76-3,5-0 76.00 38.00 18.00 20.00
AG029 16 AGN26-3,5-15,5 26.00 38.00 18.00 20.00
AG030 16 AGN36-3,5-15,5 36.00 38.00 18.00 20.00
AG031 16 AGN46-3,5-15,5 46.00 38.00 18.00 20.00
AG032 16 AGN56-3,5-15,5 56.00 38.00 18.00 20.00
AG033 16 AGN66-3,5-15,5 66.00 38.00 18.00 20.00
AG034 16 AGN76-3,5-15,5 76.00 38.00 18.00 20.00
AG035 16 AGN26-3,5-40 26.00 38.00 18.00 20.00
AG036 16 AGN36-3,5-40 36.00 38.00 18.00 20.00
AG037 16 AGN46-3,5-40 46.00 38.00 18.00 20.00
AG038 16 AGN56-3,5-40 56.00 38.00 18.00 20.00
AG039 16 AGN66-3,5-40 66.00 38.00 18.00 20.00
AG040 16 AGN76-3,5-40 76.00 38.00 18.00 20.00
AG041 20 to 35 AGM26-3,5-0 26.00 38.00 18.00 26.00
AG042 20 to 35 AGM36-3,5-0 36.00 38.00 18.00 26.00
AG043 20 to 35 AGM46-3,5-0 46.00 38.00 18.00 26.00
AG044 20 to 35 AGM56-3,5-0 56.00 38.00 18.00 26.00
AG045 20 to 35 AGM66-3,5-0 66.00 38.00 18.00 26.00
AG046 20 to 35 AGM76-3,5-0 76.00 38.00 18.00 26.00
AG047 20 to 35 AGM26-3,5-15,5 26.00 38.00 18.00 26.00
InstanceName
Series Catalog NameL
Length
DHead
Diameter
d2Thread
Diameter
L1Head
Height
D-M-E METRIC SPRUE BUSHINGS
Mold Base Library 11 - 3
AG048 20 to 35 AGM36-3,5-15,5 36.00 38.00 18.00 26.00
AG049 20 to 35 AGM46-3,5-15,5 46.00 38.00 18.00 26.00
AG050 20 to 35 AGM56-3,5-15,5 56.00 38.00 18.00 26.00
AG051 20 to 35 AGM66-3,5-15,5 66.00 38.00 18.00 26.00
AG052 20 to 35 AGM76-3,5-15,5 76.00 38.00 18.00 26.00
AG053 20 to 35 AGM26-3,5-40 26.00 38.00 18.00 26.00
AG054 20 to 35 AGM36-3,5-40 36.00 38.00 18.00 26.00
AG055 20 to 35 AGM46-3,5-40 46.00 38.00 18.00 26.00
AG056 20 to 35 AGM56-3,5-40 56.00 38.00 18.00 26.00
AG057 20 to 35 AGM66-3,5-40 66.00 38.00 18.00 26.00
AG058 20 to 35 AGM76-3,5-40 76.00 38.00 18.00 26.00
AG059 20 to 35 AGM46-5-0 46.00 38.00 18.00 26.00
AG060 20 to 35 AGM76-5-0 76.00 38.00 18.00 26.00
AG061 20 to 35 AGM46-5-15,5 46.00 38.00 18.00 26.00
AG062 20 to 35 AGM76-5-15,5 76.00 38.00 18.00 26.00
AG063 20 to 35 AGM46-5-40 46.00 38.00 18.00 26.00
AG064 20 to 35 AGM76-5-40 76.00 38.00 18.00 26.00
AG065 20 to 60 AG26-5-0 26.00 50.00 25.00 26.00
AG066 20 to 60 AG36-5-0 36.00 50.00 25.00 26.00
AG067 20 to 60 AG46-5-0 46.00 50.00 25.00 26.00
AG068 20 to 60 AG56-5-0 56.00 50.00 25.00 26.00
AG069 20 to 60 AG66-5-0 66.00 50.00 25.00 26.00
AG070 20 to 60 AG76-5-0 76.00 50.00 25.00 26.00
AG071 20 to 60 AG86-5-0 86.00 50.00 25.00 26.00
AG072 20 to 60 AG96-5-0 96.00 50.00 25.00 26.00
AG073 20 to 60 AG106-5-0 106.00 50.00 25.00 26.00
AG074 20TO60 AG126-5-0 126.00 50.00 25.00 26.00
AG075 20TO60 AG26-5-15,5 26.00 50.00 25.00 26.00
AG076 20TO60 AG36-5-15,5 36.00 50.00 25.00 26.00
AG077 20 to 60 AG46-5-15,5 46.00 50.00 25.00 26.00
InstanceName
Series Catalog NameL
Length
DHead
Diameter
d2Thread
Diameter
L1Head
Height
D-M-E METRIC SPRUE BUSHINGS
11 - 4 Mold Base Library
AG078 20 to 60 AG56-5-15,5 56.00 50.00 25.00 26.00
AG079 20 to 60 AG66-5-15,5 66.00 50.00 25.00 26.00
AG080 20 to 60 AG76-5-15,5 76.00 50.00 25.00 26.00
AG081 20 to 60 AG86-5-15,5 86.00 50.00 25.00 26.00
AG082 20 to 60 AG96-5-15,5 96.00 50.00 25.00 26.00
AG083 20 to 60 AG106-5-15,5 106.00 50.00 25.00 26.00
AG084 20 to 60 AG126-5-15,5 126.00 50.00 25.00 26.00
AG085 20 to 60 AG26-5-40 26.00 50.00 25.00 26.00
AG086 20 to 60 AG36-5-40 36.00 50.00 25.00 26.00
AG087 20 to 60 AG46-5-40 46.00 50.00 25.00 26.00
AG088 20 to 60 AG56-5-40 56.00 50.00 25.00 26.00
AG089 20 to 60 AG66-5-40 66.00 50.00 25.00 26.00
AG090 20 to 60 AG76-5-40 76.00 50.00 25.00 26.00
AG091 20 to 60 AG86-5-40 86.00 50.00 25.00 26.00
AG092 20 to 60 AG96-5-40 96.00 50.00 25.00 26.00
AG093 20 to 60 AG106-5-40 106.00 50.00 25.00 26.00
AG094 20 to 60 AG126-5-40 126.00 50.00 25.00 26.00
AG095 20 to 60 AG116-7-0 116.00 50.00 25.00 26.00
AG096 20 to 60 AG136-7-0 136.00 50.00 25.00 26.00
AG097 20 to 60 AG156-7-0 156.00 50.00 25.00 26.00
AG098 20 to 60 AG116-7-15,5 116.00 50.00 25.00 26.00
AG099 20 to 60 AG136-7-15,5 136.00 50.00 25.00 26.00
AG100 20 to 60 AG156-7-15,5 156.00 50.00 25.00 26.00
AG101 20 to 60 AG116-7-40 116.00 50.00 25.00 26.00
AG102 20 to 60 AG136-7-40 136.00 50.00 25.00 26.00
AG103 20 to 60 AG156-7-40 156.00 50.00 25.00 26.00
InstanceName
Series Catalog NameL
Length
DHead
Diameter
d2Thread
Diameter
L1Head
Height
Mold Base Library 12 - 1
13D-M-E METRIC TUBULAR DOWELS
LOCATING SLEEVES AND TUBULAR DOWELS, TYPE TD
Generic Part Name: SLEEVE_TD
CatalogName
Series hole_dia tub_length tub_dia
TD14-30 10 11.00 30.00 14.00
TD14-40 10 11.00 40.00 14.00
TD14-50 10 11.00 50.00 14.00
TD14-60 10 11.00 60.00 14.00
TD18-30 12 13.00 30.00 18.00
TD18-46 12 13.00 46.00 18.00
TD18-66 12 13.00 66.00 18.00
TD24-30 16 17.00 30.00 24.00
TD24-50 16 17.00 50.00 24.00
TD24-60 16 17.00 60.00 24.00
TD24-76 16 17.00 76.00 24.00
TD24-86 16 17.00 86.00 24.00
TD24-96 16 17.00 96.00 24.00
TD28-60 20 and 22 21.00 60.00 28.00
TD28-80 20 and 22 21.00 80.00 28.00
TD28-100 20 and 22 21.00 100.00 28.00
TD28-120 20 and 22 21.00 120.00 28.00
TD28-140 20 and 22 21.00 140.00 28.00
D-M-E METRIC TUBULAR DOWELS
12 - 2 Mold Base Library
TD32-60 25 to 35 25.00 60.00 32.00
TD32-100 25 to 35 25.00 100.00 32.00
TD32-120 25 to 35 25.00 120.00 32.00
TD32-140 25 to 35 25.00 140.00 32.00
TD32-160 25 to 35 25.00 160.00 32.00
TD42-60 40 to 55 34.00 60.00 42.00
TD42-130 40 to 55 34.00 130.00 42.00
TD42-160 40 to 55 34.00 160.00 42.00
TD42-180 40 to 55 34.00 180.00 42.00
TD50-60 60 43.00 60.00 50.00
TD50-130 60 43.00 130.00 50.00
TD50-160 60 43.00 160.00 50.00
TD50-180 60 43.00 180.00 50.00
CatalogName
Series hole_dia tub_length tub_dia
Mold Base Library 13 - 1
D-M-E METRIC SCREWS
SOCKET HEAD CAP SCREWS
Generic Part Name: SCREW_M
InstanceName
thread_dia
length head_diathread_length
head_height
M4X10 4.000 10.000 7.000 8.000 4.000
M4X20 4.000 20.000 7.000 12.000 4.000
M4X30 4.000 30.000 7.000 12.000 4.000
M5X10 5.000 10.000 9.000 8.000 5.000
M5X16 5.000 16.000 9.000 14.000 5.000
M5X20 5.000 20.000 9.000 15.000 5.000
M5X25 5.000 25.000 9.000 15.000 5.000
M5X35 5.000 35.000 9.000 15.000 5.000
M6X12 6.000 12.000 10.000 10.000 6.000
M6X16 6.000 16.000 10.000 14.000 6.000
M6X20 6.000 20.000 10.000 18.000 6.000
M6X25 6.000 25.000 10.000 18.000 6.000
M6X30 6.000 30.000 10.000 18.000 6.000
M6X35 6.000 35.000 10.000 18.000 6.000
M6X40 6.000 40.000 10.000 18.000 6.000
M6X45 6.000 45.000 10.000 18.000 6.000
M6X50 6.000 50.000 10.000 18.000 6.000
M6X60 6.000 60.000 10.000 18.000 6.000
13
D-M-E METRIC SCREWS
13 - 2 Mold Base Library
M6X70 6.000 70.000 10.000 18.000 6.000
M6X80 6.000 80.000 10.000 18.000 6.000
M6X100 6.000 100.000 10.000 18.000 6.000
M8X16 8.000 16.000 13.000 14.000 8.000
M8X18 8.000 18.000 13.000 16.000 8.000
M8X20 8.000 20.000 13.000 18.000 8.000
M8X25 8.000 25.000 13.000 22.000 8.000
M8X30 8.000 30.000 13.000 22.000 8.000
M8X50 8.000 50.000 13.000 22.000 8.000
M8X55 8.000 55.000 13.000 22.000 8.000
M8X60 8.000 60.000 13.000 22.000 8.000
M8X65 8.000 65.000 13.000 22.000 8.000
M8X70 8.000 70.000 13.000 22.000 8.000
M8X80 8.000 80.000 13.000 22.000 8.000
M8X90 8.000 90.000 13.000 22.000 8.000
M8X100 8.000 100.000 13.000 22.000 8.000
M8X120 8.000 120.000 13.000 22.000 8.000
M8X160 8.000 160.000 13.000 22.000 8.000
M8X200 8.000 200.000 13.000 22.000 8.000
M10X25 10.000 25.000 16.000 23.000 10.000
M10X30 10.000 30.000 16.000 25.000 10.000
M10X40 10.000 40.000 16.000 25.000 10.000
M10X45 10.000 45.000 16.000 25.000 10.000
M10X50 10.000 50.000 16.000 25.000 10.000
M10X60 10.000 60.000 16.000 25.000 10.000
M10X70 10.000 70.000 16.000 25.000 10.000
M10X80 10.000 80.000 16.000 25.000 10.000
M10X100 10.000 100.000 16.000 25.000 10.000
M10X110 10.000 110.000 16.000 25.000 10.000
M10X120 10.000 120.000 16.000 25.000 10.000
InstanceName
thread_dia
length head_diathread_length
head_height
D-M-E METRIC SCREWS
Mold Base Library 13 - 3
M10X140 10.000 140.000 16.000 25.000 10.000
M10X160 10.000 160.000 16.000 25.000 10.000
M12X25 12.000 25.000 18.000 23.000 12.000
M12X30 12.000 30.000 18.000 28.000 12.000
M12X35 12.000 35.000 18.000 28.000 12.000
M12X40 12.000 40.000 18.000 28.000 12.000
M12X50 12.000 50.000 18.000 28.000 12.000
M12X60 12.000 60.000 18.000 28.000 12.000
M12X70 12.000 70.000 18.000 28.000 12.000
M12X75 12.000 75.000 18.000 28.000 12.000
M12X80 12.000 80.000 18.000 28.000 12.000
M12X90 12.000 90.000 18.000 28.000 12.000
M12X100 12.000 100.000 18.000 28.000 12.000
M12X120 12.000 120.000 18.000 28.000 12.000
M12X130 12.000 130.000 18.000 28.000 12.000
M12X140 12.000 140.000 18.000 28.000 12.000
M12X150 12.000 150.000 18.000 28.000 12.000
M12X160 12.000 160.000 18.000 28.000 12.000
M12X180 12.000 180.000 18.000 28.000 12.000
M12X200 12.000 200.000 18.000 28.000 12.000
M16X30 16.000 30.000 24.000 28.000 16.000
M16X40 16.000 40.000 24.000 38.000 16.000
M16X45 16.000 45.000 24.000 38.000 16.000
M16X50 16.000 50.000 24.000 38.000 16.000
M16X60 16.000 60.000 24.000 38.000 16.000
M16X80 16.000 80.000 24.000 38.000 16.000
M16X100 16.000 100.000 24.000 38.000 16.000
M16X120 16.000 120.000 24.000 38.000 16.000
M16X130 16.000 130.000 24.000 44.000 16.000
M16X140 16.000 140.000 24.000 44.000 16.000
InstanceName
thread_dia
length head_diathread_length
head_height
D-M-E METRIC SCREWS
13 - 4 Mold Base Library
M16X150 16.000 150.000 24.000 44.000 16.000
M16X160 16.000 160.000 24.000 44.000 16.000
M16X180 16.000 180.000 24.000 44.000 16.000
M16X200 16.000 200.000 24.000 57.000 16.000
M16X210 16.000 210.000 24.000 57.000 16.000
M16X220 16.000 220.000 24.000 57.000 16.000
M16X240 16.000 240.000 24.000 57.000 16.000
M20X60 20.000 60.000 30.000 52.000 20.000
M20X120 20.000 120.000 30.000 52.000 20.000
M20X150 20.000 150.000 30.000 52.000 20.000
M20X160 20.000 160.000 30.000 52.000 20.000
M20X180 20.000 180.000 30.000 52.000 20.000
M20X200 20.000 200.000 30.000 65.000 20.000
M20X210 20.000 210.000 30.000 65.000 20.000
M20X240 20.000 240.000 30.000 65.000 20.000
M20X250 20.000 250.000 30.000 65.000 20.000
InstanceName
thread_dia
length head_diathread_length
head_height
D-M-E METRIC SCREWS
Mold Base Library 13 - 5
FLAT COUNTERSUNK SOCKET HEAD SCREWS
Generic Part Name: SCREW_SM
InstanceName
thread_dia
lengththread_length
BodyDiameter
head_dia
SM4X10 4.00 10.00 6.12 4.00 8.96
SM4X12 4.00 12.00 8.12 4.00 8.96
SM4X16 4.00 16.00 12.12 4.00 8.96
SM4X20 4.00 20.00 16.12 4.00 8.96
SM4X25 4.00 25.00 21.12 4.00 8.96
SM5X10 5.00 10.00 5.30 5.00 11.20
SM5X12 5.00 12.00 7.30 5.00 11.20
SM5X16 5.00 16.00 11.30 5.00 11.20
SM5X20 5.00 20.00 15.30 5.00 11.20
SM5X25 5.00 25.00 20.30 5.00 11.20
SM5X30 5.00 30.00 25.30 5.00 11.20
SM6X12 6.00 12.00 6.28 6.00 13.44
SM6X16 6.00 16.00 10.28 6.00 13.44
SM6X20 6.00 20.00 14.28 6.00 13.44
SM6X25 6.00 25.00 19.28 6.00 13.44
SM6X30 6.00 30.00 24.28 6.00 13.44
SM6X35 6.00 35.00 29.28 6.00 13.44
SM6X40 6.00 40.00 34.28 6.00 13.44
SM8X16 8.00 16.00 8.54 8.00 17.92
D-M-E METRIC SCREWS
13 - 6 Mold Base Library
SM8X20 8.00 20.00 12.54 8.00 17.92
SM8X25 8.00 25.00 17.54 8.00 17.92
SM8X30 8.00 30.00 22.54 8.00 17.92
SM8X35 8.00 35.00 27.54 8.00 17.92
SM8X40 8.00 40.00 32.54 8.00 17.92
SM8X45 8.00 45.00 37.54 8.00 17.92
SM8X50 8.00 50.00 28.00 8.00 17.92
SM10X20 10.00 20.00 10.80 10.00 22.40
SM10X25 10.00 25.00 15.80 10.00 22.40
SM10X30 10.00 30.00 20.80 10.00 22.40
SM10X35 10.00 35.00 25.80 10.00 22.40
SM10X40 10.00 40.00 30.80 10.00 22.40
SM10X45 10.00 45.00 35.80 10.00 22.40
SM10X50 10.00 50.00 40.80 10.00 22.40
InstanceName
thread_dia
lengththread_length
BodyDiameter
head_dia
Mold Base Library 14 - 1
1HASCO STANDARD MOLD BASE ASSEMBLIES
This chapter describes the HASCO standard mold base assemblies. The chapter contains the fol-lowing sections:
• HASCO Mold Base Assemblies• New HASCO Mold Base Assemblies• Naming Conventions• Tables of Mold Base Sizes
NOTE: To retrieve these standard assemblies, you must eithercreate the library catalog file, or include in the config.pro filethe search path for the stop pin (“st_pin”) and the othercomponent parts.
HASCO STANDARD MOLD BASE ASSEMBLIES
14 - 2 Mold Base Library
HASCO MOLD BASE ASSEMBLIES
Figure 14-1Standard Mold Base Assembly - Types A and AW
Top View Isometric View
AW Series in parentheses
Cross-sectional View Side View
Plate View
HASCO STANDARD MOLD BASE ASSEMBLIES
Mold Base Library 14 - 3
Figure 14-2Standard Mold Base Assembly - Types B and BW
Top ViewIsometric View
Plate View
Side View
Cross-sectional View
HASCO STANDARD MOLD BASE ASSEMBLIES
14 - 4 Mold Base Library
Figure 14-3Standard Mold Base Assembly - Types T and TW
Figure 14-4Standard Mold Base Assembly - Types X and XW
Plate View
Top ViewIsometric View
Cross-sectional View
Side View
HASCO STANDARD MOLD BASE ASSEMBLIES
Mold Base Library 14 - 5
Plate View
Top ViewIsometric View
Cross-sectional View
Side View
HASCO STANDARD MOLD BASE ASSEMBLIES
14 - 6 Mold Base Library
NEW HASCO MOLD BASE ASSEMBLIES
The HASCO MOLD BASE Library contains both basic assemblies,which include only plates, and new assemblies, which include theplates and the component parts. This section describes the newHASCO mold base assemblies and contains the followingsubsections:
• Assembly representation types• Views of representations
For information on setting up search paths for access to theseassemblies, refer to the Chapter “The HASCO Standard Mold BaseAssemblies” inIntroduction to the Libraries.
New Assembly Representation Types
There are now three types of representations of the assemblies:
• The simplified representation “curve”• The simplified representation “plates” as displayed in the
previous section• The master representation, the assembly with components
Examples of the “curve” and the assemblies with components areshown on the next few pages.
These assemblies are named according to specific conventions. Foreach standard mold type, for example A, B, T, and X, there exists asimilar W version that is almost identical. The differences occur in thekinds of components that the mold types can contain. For example:
Mold Type Contains Components
A Locating RingSprue Bushing
Return PinsFlat Headed Socket Cap Screw
AW N/A
B Locating RingSprue Bushing
Return PinsFlat Headed Socket Cap Screw
BW N/A
T Locating RingSprue Bushing
Return PinsFlat Headed Socket Cap Screw
TW N/A
HASCO STANDARD MOLD BASE ASSEMBLIES
Mold Base Library 14 - 7
Refer to thecomp_hs directory for more information about eachcomponent.
X Locating RingSprue Bushing
Return PinsFlat Headed Socket Cap Screw
XW N/A
Mold Type Contains Components
HASCO STANDARD MOLD BASE ASSEMBLIES
14 - 8 Mold Base Library
Views of New Representations
This section displays the simple representation of a curve and themaster representations of assemblies with components.
This drawing displays a simplified representation of a mold base.Each plate is represented by a cross-sectional datum curve.
Figure 14-5Mold Base Simplified Representation (curve.drw)
HASCO STANDARD MOLD BASE ASSEMBLIES
Mold Base Library 14 - 9
This drawing displays a cross-sectional view of the “a” assembly(a_aw10x12_n) with components.
Figure 14-6Moldbase Assembly - Type A with Components
HASCO STANDARD MOLD BASE ASSEMBLIES
14 - 10 Mold Base Library
This drawing displays a cross-sectional view of the “aw” assembly(a_aw10x12_n) with components.
Figure 14-7Moldbase Assembly - Type AW with Components
NOTE: The differences between a and aw are some of thecomponents.
HASCO STANDARD MOLD BASE ASSEMBLIES
Mold Base Library 14 - 11
This drawing displays a cross-sectional view of the “B” assembly(b_bw10x12_n) with components.
Figure 14-8Moldbase Assembly - Type B with Components
HASCO STANDARD MOLD BASE ASSEMBLIES
14 - 12 Mold Base Library
This drawing displays a cross-sectional view of the “bw” assembly(b_bw10x12_n) with components.
Figure 14-9Moldbase Assembly - Type BW with Components
NOTE: The differences between b and bw are some of thecomponents.
HASCO STANDARD MOLD BASE ASSEMBLIES
Mold Base Library 14 - 13
This drawing displays a cross-sectional view of the “t” assembly(t_tw10x12_n) with components.
Figure 14-10Moldbase Assembly - Type T with Components
HASCO STANDARD MOLD BASE ASSEMBLIES
14 - 14 Mold Base Library
This drawing displays a cross-sectional view of the “tw” assembly(t_tw10x12_n) with its components.
Figure 14-11Moldbase Assembly - Type TW with Components
NOTE: The differences between t and tw are some of thecomponents.
HASCO STANDARD MOLD BASE ASSEMBLIES
Mold Base Library 14 - 15
This drawing displays a cross-sectional view of the “x” assembly(x_xw10x12_n) with its components.
Figure 14-12Moldbase Assembly - Type X with Components
HASCO STANDARD MOLD BASE ASSEMBLIES
14 - 16 Mold Base Library
This drawing displays a cross-sectional view of the “xw” assembly(x_xw10x12_n) with its components.
Figure 14-13Moldbase Assembly - Type XW with Components
NOTE: The differences between x and xw are some of thecomponents.
HASCO STANDARD MOLD BASE ASSEMBLIES
Mold Base Library 14 - 17
NAMING CONVENTION
Parts and assemblies in the MOLD BASE LIBRARY are namedaccording to the following convention.
Mold Base Assemblies
A mold base assembly with the dimensions 10" by 12" is located inthe directory “10x12,” which contains all the available mold types:
• a_aw10x12.asm• b_bw10x12.asm• t_tw10x12.asm• x_xw10x12.asm
After you select the type of mold, you can select the generic assemblyor an instance. If you select an instance, you can then select theindividual plate instances to create a customized mold.
The generic assembly and its instances are named as follows:
Generic: A_AW10x12.asm - The generic assembly of the “A”series
Instances: A9-7/10x12/THICK_AxTHICK_B - The assemblyinstance of the “A” seriesAW9-7/10x12/THICK_AxTHICK_B - The assemblyinstance of the “AW” series
Note that for naming the library assembly, the actual size of theassembly was rounded up to use whole numbers. This has been donefor most of the mold bases, because the actual size of the mold basesis often a small fraction less than a whole number.
HASCO STANDARD MOLD BASE ASSEMBLIES
14 - 18 Mold Base Library
New Mold Base Assemblies
The new mold base assemblies in the HASCO MOLD BASELIBRARY have the following generic assembly names:
• a_aw10x12_n.asm• b_bw10x12_n.asm• t_tw10x12_n.asm• x_xw10x12_n.asm
These assembly files contain not only the plates but also thecomponent parts of each mold base. Note that the names are the sameas those for the basic assemblies, except that “_n” has been added tothe end of the name to indicate the presence of the components in theassembly.
The instance assembly names for the new mold base assemblies are asfollows:
• A9-7/10x12/THICK_AxTHICK_B - The assembly instanceof the “A” series
• AW9-7/10x12/THICK_AxTHICK_B - The assembly in-stance of the “AW” series
All the new HASCO standard mold base assemblies are also locatedin the directoryassy_hs in subdirectories named for the size of themold base.
Top Clamping Plate
Top clamping plates have only one value for thickness. The first partof the instance name shows the mold component number, and thesecond part shows the mold base size of the plate. For example, topclamping plates for an “A” type mold base with the dimensions10" by 16" have the following names:
Generic: KI15_10x16 (A type) or KI16_10x16 (AW type)Instance: KI15_1016_13 - The thickness is 1-3/8".
Bottom Clamping Plate
Bottom clamping plates have only one value for thickness. The firstpart of the instance name shows the mold component number, and thesecond part shows the mold base size of the plate. For example,bottom clamping plates for an “A” type mold base with thedimensions 10" by 16" have the following names:
Generic: KI17_10x16 (A type) or KI17_10x16 (AW type)Instance: KI17_1016_07 - The thickness is 7/8".
HASCO STANDARD MOLD BASE ASSEMBLIES
Mold Base Library 14 - 19
Clamping and Cavity Plate
Clamping and cavity plates have six instances that define six differentthicknesses. The first part of the instance name shows the moldcomponent number, and the second part shows the mold base size ofthe plate. For example, clamping and cavity plates for a “B” type moldbase with the dimensions 10" by 16" have the following names:
Generic: KI18_10x16 (B type) or KI19_10x16 (BW type)Instances: KI18/9-7/8x16x1-7/8 - The thickness is 1-7/8".
Multi-Purpose Cavity Plates
Multi-purpose cavity plates have three instances in the KI24 versionand eight instances in the KI20 version that define the differentthicknesses. The first part of the instance name shows the moldcomponent number, and the second part shows the mold base size ofthe plate. For example, multi-purpose cavity plates for an “X” typemold base with the dimensions 10" by 16" have the following names:
Generic: KI24_10x16 (X type) or KI20_10x16 (XW type)Instances: KI24/9-7/8x16x7/8 - The thickness is 7/8".
Cavity Plates
Cavity plates have eight instances that define the differentthicknesses. The first part of the instance name shows the moldcomponent number, and the second part shows the mold base size ofthe plate. For example, cavity plates for an “X” type mold base withthe dimensions 10" by 16" have the following names:
Generic: KI22_10x16 (X type) or KI21_10x16 (XW type)Instances: KI22/9-7/8x16x7/8 - The thickness is 7/8".
Core Plates
Core plates have eight instances that define the different thicknesses.The first part of the instance name shows the mold componentnumber, and the second part shows the mold base size of the plate. Forexample, core plates for an “X” type mold base with the dimensions10" by 16" have the following names:
Generic: KI22_10x16 (X type) or KI21_10x16 (XW type)Instances: KI22/9-7/8x16x7/8 - The thickness is 7/8".
HASCO STANDARD MOLD BASE ASSEMBLIES
14 - 20 Mold Base Library
Back Up Plates
Back up plates have only one value for thickness. The first part of theinstance name shows the mold component number, and the secondpart shows the mold base size of the plate. For example, back up platesfor an “A” type mold base with the dimensions 10" by 16" have thefollowing names:
Generic: KI31_10x16 (A type) or KI30_10x16 (AW type)Instance: KI31_1016_17 - The thickness is 1-7/8".
Spacer Blocks
Spacer blocks have five instances that define the different thicknesses.The first part of the instance name shows the mold componentnumber, and the second part shows the mold base size of the plate. Forexample, a core plate for either type of mold base with the dimensions10" by 16" have the following names:
Generic: KI40_10x16Instances: KI40/9-7/8x16x2-1/2 - The thickness is 2-1/2".
Ejector Retaining Plates
Ejector retaining plates have only one value for thickness. The firstpart of the instance name shows the mold component number, and thesecond part shows the mold base size of the plate. For example,ejector retaining plates for an “A” type of mold base with thedimensions 10" by 16" have the following names:
Generic: KI62_10x16 (A type) or KI60_10x16 (AW type)Instance: KI62_1016_04 - The thickness is 1/2".
Ejector Plates
Ejector plates have only one value for thickness. The first part of theinstance name shows the mold component number, and the secondpart shows the mold base size of the plate. For example, ejector platesfor either type of mold base with the dimensions 10" by 16" have thefollowing names:
Generic: KI70_10x16Instance: KI70_1016_10 - The thickness is 1".
Component Parts
Component parts are named as abbreviated forms of their names in theHASCO Company catalog; instance names correspond exactly to thecatalog numbers. All the component parts are located in the directorycomp_hs in subdirectories named for the types of parts they contain.
HASCO STANDARD MOLD BASE ASSEMBLIES
Mold Base Library 14 - 21
TABLE OF MOLD BASE SIZES
The following tables list the available mold base sizes. All thedimensions are thicknesses, expressed in inches.
a. W series onlyb. Not for W series
8x8
COMPONENTSERIES
A & AW B & BW X & XW T & TW
Top Clamping (KI15/16) 1-3/8 N/A 1-3/8 N/A
Bottom Clamping(KI17) 7/8 7/8 7/8 7/8
Clamping/Cavity (KI18/19) N/A 1-7/8 to 4-3/8 N/A 1-7/8 to 4-3/8
Multi-Purpose Cavity (KI20) 7/8 to 4-3/8a 7/8 to 4-3/8a 7/8 to 4-3/8a 7/8 to 4-3/8
Multi-Purpose Cavity (KI24) N/A N/A 7/8 to 1-7/8 7/8 to 1-7/8
Cavity (KI21/22) 7/8 to 4-3/8 N/A 7/8 to 4-3/8 N/A
Core (KI23) 7/8 to 4-3/8b 7/8 to 4-3/8b 7/8 to 4-3/8b 7/8 to 4-3/8b
Back Up (KI30/31) 1-7/8 N/A N/A 1-7/8
Spacer Blocks (KI40) 2-1/2 to 5 2-1/2 to 5 2-1/2 to 5 2-1/2 to 5
Ejector Retainer (KI60/62) 1/2 1/2 1/2 1/2
Ejector Plate (KI70) 1 1 1 1
8x11
COMPONENTSERIES
A & AW B & BW X & XW T & TW
Top Clamping (KI15/16) 1-3/8 N/A 1-3/8 N/A
Bottom Clamping(KI17) 7/8 7/8 7/8 7/8
Clamping/Cavity (KI18/19) N/A 1-7/8 to 4-3/8 N/A 1-7/8 to 4-3/8
Multi-Purpose Cavity (KI20) 7/8 to 4-3/8a 7/8 to 4-3/8a 7/8 to 4-3/8a 7/8 to 4-3/8
Multi-Purpose Cavity (KI24) N/A N/A 7/8 to 1-7/8 7/8 to 1-7/8
Cavity (KI21/22) 7/8 to 4-3/8 N/A 7/8 to 4-3/8 N/A
Core (KI23) 7/8 to 4-3/8b 7/8 to 4-3/8b 7/8 to 4-3/8b 7/8 to 4-3/8b
Back Up (KI30/31) 1-7/8 N/A N/A 1-7/8
Spacer Blocks (KI40) 2-1/2 to 5 2-1/2 to 5 2-1/2 to 5 2-1/2 to 5
Ejector Retainer (KI60/62) 1/2 1/2 1/2 1/2
Ejector Plate (KI70) 1 1 1 1
HASCO STANDARD MOLD BASE ASSEMBLIES
14 - 22 Mold Base Library
a. W series onlyb. Not for W series
10x8
COMPONENTSERIES
A & AW B & BW X & XW T & TW
Top Clamping (KI15/16) 1-3/8 N/A 1-3/8 N/A
Bottom Clamping(KI17) 7/8 7/8 7/8 7/8
Clamping/Cavity (KI18/19) N/A 1-7/8 to 4-3/8 N/A 1-7/8 to 4-3/8
Multi-Purpose Cavity (KI20) 7/8 to 4-3/8a 7/8 to 4-3/8a 7/8 to 4-3/8a 7/8 to 4-3/8
Multi-Purpose Cavity (KI24) N/A N/A 7/8 to 1-7/8 7/8 to 1-7/8
Cavity (KI21/22) 7/8 to 4-3/8 N/A 7/8 to 4-3/8 N/A
Core (KI23) 7/8 to 4-3/8b 7/8 to 4-3/8b 7/8 to 4-3/8b 7/8 to 4-3/8b
Back Up (KI30/31) 1-7/8 N/A N/A 1-7/8
Spacer Blocks (KI40) 2-1/2 to 5 2-1/2 to 5 2-1/2 to 5 2-1/2 to 5
Ejector Retainer (KI60/62) 1/2 1/2 1/2 1/2
Ejector Plate (KI70) 1 1 1 1
10x12
COMPONENTSERIES
A & AW B & BW X & XW T & TW
Top Clamping (KI15/16) 1-3/8 N/A 1-3/8 N/A
Bottom Clamping(KI17) 7/8 7/8 7/8 7/8
Clamping/Cavity (KI18/19) N/A 1-7/8 to 4-3/8 N/A 1-7/8 to 4-3/8
Multi-Purpose Cavity (KI20) 7/8 to 4-3/8a 7/8 to 4-3/8a 7/8 to 4-3/8a 7/8 to 4-3/8
Multi-Purpose Cavity (KI24) N/A N/A 7/8 to 1-7/8 7/8 to 1-7/8
Cavity (KI21/22) 7/8 to 4-3/8 N/A 7/8 to 4-3/8 N/A
Core (KI23) 7/8 to 4-3/8b 7/8 to 4-3/8b 7/8 to 4-3/8b 7/8 to 4-3/8b
Back Up (KI30/31) 1-7/8 N/A N/A 1-7/8
Spacer Blocks (KI40) 2-1/2 to 5 2-1/2 to 5 2-1/2 to 5 2-1/2 to 5
Ejector Retainer (KI60/62) 1/2 1/2 1/2 1/2
Ejector Plate (KI70) 1 1 1 1
HASCO STANDARD MOLD BASE ASSEMBLIES
Mold Base Library 14 - 23
a. W series onlyb. Not for W series
10x16
COMPONENTSERIES
A & AW B & BW X & XW T & TW
Top Clamping (KI15/16) 1-3/8 N/A 1-3/8 N/A
Bottom Clamping(KI17) 7/8 7/8 7/8 7/8
Clamping/Cavity (KI18/19) N/A 1-7/8 to 4-3/8 N/A 1-7/8 to 4-3/8
Multi-Purpose Cavity (KI20) 7/8 to 4-3/8a 7/8 to 4-3/8a 7/8 to 4-3/8a 7/8 to 4-3/8
Multi-Purpose Cavity (KI24) N/A N/A 7/8 to 1-7/8 7/8 to 1-7/8
Cavity (KI21/22) 7/8 to 4-3/8 N/A 7/8 to 4-3/8 N/A
Core (KI23) 7/8 to 4-3/8b 7/8 to 4-3/8b 7/8 to 4-3/8b 7/8 to 4-3/8b
Back Up (KI30/31) 1-7/8 N/A N/A 1-7/8
Spacer Blocks (KI40) 2-1/2 to 5 2-1/2 to 5 2-1/2 to 5 2-1/2 to 5
Ejector Retainer (KI60/62) 1/2 1/2 1/2 1/2
Ejector Plate (KI70) 1 1 1 1
10x20
COMPONENTSERIES
A & AW B & BW X & XW T & TW
Top Clamping (KI15/16) 1-3/8 N/A 1-3/8 N/A
Bottom Clamping(KI17) 7/8 7/8 7/8 7/8
Clamping/Cavity (KI18/19) N/A 1-7/8 to 4-3/8 N/A 1-7/8 to 4-3/8
Multi-Purpose Cavity (KI20) 7/8 to 4-3/8a 7/8 to 4-3/8a 7/8 to 4-3/8a 7/8 to 4-3/8
Multi-Purpose Cavity (KI24) N/A N/A 7/8 to 1-7/8 7/8 to 1-7/8
Cavity (KI21/22) 7/8 to 4-3/8 N/A 7/8 to 4-3/8 N/A
Core (KI23) 7/8 to 4-3/8b 7/8 to 4-3/8b 7/8 to 4-3/8b 7/8 to 4-3/8b
Back Up (KI30/31) 1-7/8 N/A N/A 1-7/8
Spacer Blocks (KI40) 2-1/2 to 5 2-1/2 to 5 2-1/2 to 5 2-1/2 to 5
Ejector Retainer (KI60/62) 1/2 1/2 1/2 1/2
Ejector Plate (KI70) 1 1 1 1
HASCO STANDARD MOLD BASE ASSEMBLIES
14 - 24 Mold Base Library
a. W series onlyb. Not for W series
11x12
COMPONENTSERIES
A & AW B & BW X & XW T & TW
Top Clamping (KI15/16) 1-3/8 N/A 1-3/8 N/A
Bottom Clamping(KI17) 7/8 7/8 7/8 7/8
Clamping/Cavity (KI18/19) N/A 1-7/8 to 4-3/8 N/A 1-7/8 to 4-3/8
Multi-Purpose Cavity (KI20) 7/8 to 4-3/8a 7/8 to 4-3/8a 7/8 to 4-3/8a 7/8 to 4-3/8
Multi-Purpose Cavity (KI24) N/A N/A 7/8 to 1-7/8 7/8 to 1-7/8
Cavity (KI21/22) 7/8 to 4-3/8 N/A 7/8 to 4-3/8 N/A
Core (KI23) 7/8 to 4-3/8b 7/8 to 4-3/8b 7/8 to 4-3/8b 7/8 to 4-3/8b
Back Up (KI30/31) 1-7/8 N/A N/A 1-7/8
Spacer Blocks (KI40) 2-1/2 to 5 2-1/2 to 5 2-1/2 to 5 2-1/2 to 5
Ejector Retainer (KI60/62) 1/2 1/2 1/2 1/2
Ejector Plate (KI70) 1 1 1 1
11x14
COMPONENTSERIES
A & AW B & BW X & XW T & TW
Top Clamping (KI15/16) 1-3/8 N/A 1-3/8 N/A
Bottom Clamping(KI17) 7/8 7/8 7/8 7/8
Clamping/Cavity (KI18/19) N/A 1-7/8 to 4-3/8 N/A 1-7/8 to 4-3/8
Multi-Purpose Cavity (KI20) 7/8 to 4-3/8a 7/8 to 4-3/8a 7/8 to 4-3/8a 7/8 to 4-3/8
Multi-Purpose Cavity (KI24) N/A N/A 7/8 to 1-7/8 7/8 to 1-7/8
Cavity (KI21/22) 7/8 to 4-3/8 N/A 7/8 to 4-3/8 N/A
Core (KI23) 7/8 to 4-3/8b 7/8 to 4-3/8b 7/8 to 4-3/8b 7/8 to 4-3/8b
Back Up (KI30/31) 1-7/8 N/A N/A 1-7/8
Spacer Blocks (KI40) 2-1/2 to 5 2-1/2 to 5 2-1/2 to 5 2-1/2 to 5
Ejector Retainer (KI60/62) 1/2 1/2 1/2 1/2
Ejector Plate (KI70) 1 1 1 1
HASCO STANDARD MOLD BASE ASSEMBLIES
Mold Base Library 14 - 25
a. W series onlyb. Not for W series
11x18
COMPONENTSERIES
A & AW B & BW X & XW T & TW
Top Clamping (KI15/16) 1-3/8 N/A 1-3/8 N/A
Bottom Clamping(KI17) 7/8 7/8 7/8 7/8
Clamping/Cavity (KI18/19) N/A 1-7/8 to 4-3/8 N/A 1-7/8 to 4-3/8
Multi-Purpose Cavity (KI20) 7/8 to 4-3/8a 7/8 to 4-3/8a 7/8 to 4-3/8a 7/8 to 4-3/8
Multi-Purpose Cavity (KI24) N/A N/A 7/8 to 1-7/8 7/8 to 1-7/8
Cavity (KI21/22) 7/8 to 4-3/8 N/A 7/8 to 4-3/8 N/A
Core (KI23) 7/8 to 4-3/8b 7/8 to 4-3/8b 7/8 to 4-3/8b 7/8 to 4-3/8b
Back Up (KI30/31) 1-7/8 N/A N/A 1-7/8
Spacer Blocks (KI40) 2-1/2 to 5 2-1/2 to 5 2-1/2 to 5 2-1/2 to 5
Ejector Retainer (KI60/62) 1/2 1/2 1/2 1/2
Ejector Plate (KI70) 1 1 1 1
11x23
COMPONENTSERIES
A & AW B & BW X & XW T & TW
Top Clamping (KI15/16) 1-3/8 N/A 1-3/8 N/A
Bottom Clamping(KI17) 7/8 7/8 7/8 7/8
Clamping/Cavity (KI18/19) N/A 1-7/8 to 4-3/8 N/A 1-7/8 to 4-3/8
Multi-Purpose Cavity (KI20) 7/8 to 4-3/8a 7/8 to 4-3/8a 7/8 to 4-3/8a 7/8 to 4-3/8
Multi-Purpose Cavity (KI24) N/A N/A 7/8 to 1-7/8 7/8 to 1-7/8
Cavity (KI21/22) 7/8 to 4-3/8 N/A 7/8 to 4-3/8 N/A
Core (KI23) 7/8 to 4-3/8b 7/8 to 4-3/8b 7/8 to 4-3/8b 7/8 to 4-3/8b
Back Up (KI30/31) 1-7/8 N/A N/A 1-7/8
Spacer Blocks (KI40) 2-1/2 to 5 2-1/2 to 5 2-1/2 to 5 2-1/2 to 5
Ejector Retainer (KI60/62) 1/2 1/2 1/2 1/2
Ejector Plate (KI70) 1 1 1 1
HASCO STANDARD MOLD BASE ASSEMBLIES
14 - 26 Mold Base Library
a. W series onlyb. Not for W series
12x12
COMPONENTSERIES
A & AW B & BW X & XW T & TW
Top Clamping (KI15/16) 1-3/8 N/A 1-3/8 N/A
Bottom Clamping(KI17) 7/8 7/8 7/8 7/8
Clamping/Cavity (KI18/19) N/A 1-7/8 to 5-7/8 N/A 1-7/8 to 5-7/8
Multi-Purpose Cavity (KI20) 7/8 to 5-7/8a 7/8 to 5-7/8a 7/8 to 5-7/8a 7/8 to 5-7/8
Multi-Purpose Cavity (KI24) N/A N/A 7/8 to 1-7/8 7/8 to 1-7/8
Cavity (KI21/22) 7/8 to 5-7/8 N/A 7/8 to 5-7/8 N/A
Core (KI23) 7/8 to 5-7/8b 7/8 to 5-7/8b 7/8 to 5-7/8b 7/8 to 5-7/8b
Back Up (KI30/31) 1-7/8 N/A N/A 1-7/8
Spacer Blocks (KI40) 3 to 5 3 to 5 3 to 5 3 to 5
Ejector Retainer (KI60/62) 1/2 1/2 1/2 1/2
Ejector Plate (KI70) 1-1/4 1-1/4 1-1/4 1-1/4
12x15
COMPONENTSERIES
A & AW B & BW X & XW T & TW
Top Clamping (KI15/16) 1-3/8 N/A 1-3/8 N/A
Bottom Clamping(KI17) 7/8 7/8 7/8 7/8
Clamping/Cavity (KI18/19) N/A 1-7/8 to 5-7/8 N/A 1-7/8 to 5-7/8
Multi-Purpose Cavity (KI20) 7/8 to 5-7/8a 7/8 to 5-7/8a 7/8 to 5-7/8a 7/8 to 5-7/8
Multi-Purpose Cavity (KI24) N/A N/A 7/8 to 1-7/8 7/8 to 1-7/8
Cavity (KI21/22) 7/8 to 5-7/8 N/A 7/8 to 5-7/8 N/A
Core (KI23) 7/8 to 5-7/8b 7/8 to 5-7/8b 7/8 to 5-7/8b 7/8 to 5-7/8b
Back Up (KI30/31) 1-7/8 N/A N/A 1-7/8
Spacer Blocks (KI40) 3 to 5 3 to 5 3 to 5 3 to 5
Ejector Retainer (KI60/62) 1/2 1/2 1/2 1/2
Ejector Plate (KI70) 1-1/4 1-1/4 1-1/4 1-1/4
HASCO STANDARD MOLD BASE ASSEMBLIES
Mold Base Library 14 - 27
a. W series onlyb. Not for W series
12x20
COMPONENTSERIES
A & AW B & BW X & XW T & TW
Top Clamping (KI15/16) 1-3/8 N/A 1-3/8 N/A
Bottom Clamping(KI17) 7/8 7/8 7/8 7/8
Clamping/Cavity (KI18/19) N/A 1-7/8 to 5-7/8 N/A 1-7/8 to 5-7/8
Multi-Purpose Cavity (KI20) 7/8 to 5-7/8a 7/8 to 5-7/8a 7/8 to 5-7/8a 7/8 to 5-7/8
Multi-Purpose Cavity (KI24) N/A N/A 7/8 to 1-7/8 7/8 to 1-7/8
Cavity (KI21/22) 7/8 to 5-7/8 N/A 7/8 to 5-7/8 N/A
Core (KI23) 7/8 to 5-7/8b 7/8 to 5-7/8b 7/8 to 5-7/8b 7/8 to 5-7/8b
Back Up (KI30/31) 1-7/8 N/A N/A 1-7/8
Spacer Blocks (KI40) 3 to 5 3 to 5 3 to 5 3 to 5
Ejector Retainer (KI60/62) 1/2 1/2 1/2 1/2
Ejector Plate (KI70) 1-1/4 1-1/4 1-1/4 1-1/4
12x23
COMPONENTSERIES
A & AW B & BW X & XW T & TW
Top Clamping (KI15/16) 1-3/8 N/A 1-3/8 N/A
Bottom Clamping(KI17) 7/8 7/8 7/8 7/8
Clamping/Cavity (KI18/19) N/A 1-7/8 to 5-7/8 N/A 1-7/8 to 5-7/8
Multi-Purpose Cavity (KI20) 7/8 to 5-7/8a 7/8 to 5-7/8a 7/8 to 5-7/8a 7/8 to 5-7/8
Multi-Purpose Cavity (KI24) N/A N/A 7/8 to 1-7/8 7/8 to 1-7/8
Cavity (KI21/22) 7/8 to 5-7/8 N/A 7/8 to 5-7/8 N/A
Core (KI23) 7/8 to 5-7/8b 7/8 to 5-7/8b 7/8 to 5-7/8b 7/8 to 5-7/8b
Back Up (KI30/31) 1-7/8 N/A N/A 1-7/8
Spacer Blocks (KI40) 3 to 5 3 to 5 3 to 5 3 to 5
Ejector Retainer (KI60/62) 1/2 1/2 1/2 1/2
Ejector Plate (KI70) 1-1/4 1-1/4 1-1/4 1-1/4
HASCO STANDARD MOLD BASE ASSEMBLIES
14 - 28 Mold Base Library
a. W series onlyb. Not for W series
13x15
COMPONENTSERIES
A & AW B & BW X & XW T & TW
Top Clamping (KI15/16) 1-3/8 N/A 1-3/8 N/A
Bottom Clamping(KI17) 7/8 7/8 7/8 7/8
Clamping/Cavity (KI18/19) N/A 1-7/8 to 5-7/8 N/A 1-7/8 to 5-7/8
Multi-Purpose Cavity (KI20) 7/8 to 5-7/8a 7/8 to 5-7/8a 7/8 to 5-7/8a 7/8 to 5-7/8
Multi-Purpose Cavity (KI24) N/A N/A 7/8 to 1-7/8 7/8 to 1-7/8
Cavity (KI21/22) 7/8 to 5-7/8 N/A 7/8 to 5-7/8 N/A
Core (KI23) 7/8 to 5-7/8b 7/8 to 5-7/8b 7/8 to 5-7/8b 7/8 to 5-7/8b
Back Up (KI30/31) 1-7/8 N/A N/A 1-7/8
Spacer Blocks (KI40) 3 to 5 3 to 5 3 to 5 3 to 5
Ejector Retainer (KI60/62) 1/2 1/2 1/2 1/2
Ejector Plate (KI70) 1-1/4 1-1/4 1-1/4 1-1/4
13x18
COMPONENTSERIES
A & AW B & BW X & XW T & TW
Top Clamping (KI15/16) 1-3/8 N/A 1-3/8 N/A
Bottom Clamping(KI17) 7/8 7/8 7/8 7/8
Clamping/Cavity (KI18/19) N/A 1-7/8 to 5-7/8 N/A 1-7/8 to 5-7/8
Multi-Purpose Cavity (KI20) 7/8 to 5-7/8a 7/8 to 5-7/8a 7/8 to 5-7/8a 7/8 to 5-7/8
Multi-Purpose Cavity (KI24) N/A N/A 7/8 to 1-7/8 7/8 to 1-7/8
Cavity (KI21/22) 7/8 to 5-7/8 N/A 7/8 to 5-7/8 N/A
Core (KI23) 7/8 to 5-7/8b 7/8 to 5-7/8b 7/8 to 5-7/8b 7/8 to 5-7/8b
Back Up (KI30/31) 1-7/8 N/A N/A 1-7/8
Spacer Blocks (KI40) 3 to 5 3 to 5 3 to 5 3 to 5
Ejector Retainer (KI60/62) 1/2 1/2 1/2 1/2
Ejector Plate (KI70) 1-1/4 1-1/4 1-1/4 1-1/4
HASCO STANDARD MOLD BASE ASSEMBLIES
Mold Base Library 14 - 29
a. W series onlyb. Not for W series
13x20
COMPONENTSERIES
A & AW B & BW X & XW T & TW
Top Clamping (KI15/16) 1-3/8 N/A 1-3/8 N/A
Bottom Clamping(KI17) 7/8 7/8 7/8 7/8
Clamping/Cavity (KI18/19) N/A 1-7/8 to 5-7/8 N/A 1-7/8 to 5-7/8
Multi-Purpose Cavity (KI20) 7/8 to 5-7/8a 7/8 to 5-7/8a 7/8 to 5-7/8a 7/8 to 5-7/8
Multi-Purpose Cavity (KI24) N/A N/A 7/8 to 1-7/8 7/8 to 1-7/8
Cavity (KI21/22) 7/8 to 5-7/8 N/A 7/8 to 5-7/8 N/A
Core (KI23) 7/8 to 5-7/8b 7/8 to 5-7/8b 7/8 to 5-7/8b 7/8 to 5-7/8b
Back Up (KI30/31) 1-7/8 N/A N/A 1-7/8
Spacer Blocks (KI40) 3 to 5 3 to 5 3 to 5 3 to 5
Ejector Retainer (KI60/62) 1/2 1/2 1/2 1/2
Ejector Plate (KI70) 1-1/4 1-1/4 1-1/4 1-1/4
13x23
COMPONENTSERIES
A & AW B & BW X & XW T & TW
Top Clamping (KI15/16) 1-3/8 N/A 1-3/8 N/A
Bottom Clamping(KI17) 7/8 7/8 7/8 7/8
Clamping/Cavity (KI18/19) N/A 2-3/8 to 5-7/8 N/A 2-3/8 to 5-7/8
Multi-Purpose Cavity (KI20) 7/8 to 5-7/8a 7/8 to 5-7/8a 7/8 to 5-7/8a 7/8 to 5-7/8
Multi-Purpose Cavity (KI24) N/A N/A 7/8 to 1-7/8 7/8 to 1-7/8
Cavity (KI21/22) 7/8 to 5-7/8 N/A 7/8 to 5-7/8 N/A
Core (KI23) 7/8 to 5-7/8b 7/8 to 5-7/8b 7/8 to 5-7/8b 7/8 to 5-7/8b
Back Up (KI30/31) 1-7/8 N/A N/A 1-7/8
Spacer Blocks (KI40) 3 to 5 3 to 5 3 to 5 3 to 5
Ejector Retainer (KI60/62) 1/2 1/2 1/2 1/2
Ejector Plate (KI70) 1-1/4 1-1/4 1-1/4 1-1/4
HASCO STANDARD MOLD BASE ASSEMBLIES
14 - 30 Mold Base Library
a. W series onlyb. Not for W series
13x26
COMPONENTSERIES
A & AW B & BW X & XW T & TW
Top Clamping (KI15/16) 1-3/8 N/A 1-3/8 N/A
Bottom Clamping(KI17) 7/8 7/8 7/8 7/8
Clamping/Cavity (KI18/19) N/A 2-3/8 to 5-7/8 N/A 2-3/8 to 5-7/8
Multi-Purpose Cavity (KI20) 7/8 to 5-7/8a 7/8 to 5-7/8a 7/8 to 5-7/8a 7/8 to 5-7/8
Multi-Purpose Cavity (KI24) N/A N/A 7/8 to 1-7/8 7/8 to 1-7/8
Cavity (KI21/22) 7/8 to 5-7/8 N/A 7/8 to 5-7/8 N/A
Core (KI23) 7/8 to 5-7/8b 7/8 to 5-7/8b 7/8 to 5-7/8b 7/8 to 5-7/8b
Back Up (KI30/31) 1-7/8 N/A N/A 1-7/8
Spacer Blocks (KI40) 3 to 5 3 to 5 3 to 5 3 to 5
Ejector Retainer (KI60/62) 1/2 1/2 1/2 1/2
Ejector Plate (KI70) 1-1/4 1-1/4 1-1/4 1-1/4
13x29
COMPONENTSERIES
A & AW B & BW X & XW T & TW
Top Clamping (KI15/16) 1-3/8 N/A 1-3/8 N/A
Bottom Clamping(KI17) 7/8 7/8 7/8 7/8
Clamping/Cavity (KI18/19) N/A 2-3/8 to 5-7/8 N/A 2-3/8 to 5-7/8
Multi-Purpose Cavity (KI20) 7/8 to 5-7/8a 7/8 to 5-7/8a 7/8 to 5-7/8a 7/8 to 5-7/8
Multi-Purpose Cavity (KI24) N/A N/A 7/8 to 1-7/8 7/8 to 1-7/8
Cavity (KI21/22) 7/8 to 5-7/8 N/A 7/8 to 5-7/8 N/A
Core (KI23) 7/8 to 5-7/8b 7/8 to 5-7/8b 7/8 to 5-7/8b 7/8 to 5-7/8b
Back Up (KI30/31) 1-7/8 N/A N/A 1-7/8
Spacer Blocks (KI40) 3 to 5 3 to 5 3 to 5 3 to 5
Ejector Retainer (KI60/62) 1/2 1/2 1/2 1/2
Ejector Plate (KI70) 1-1/4 1-1/4 1-1/4 1-1/4
HASCO STANDARD MOLD BASE ASSEMBLIES
Mold Base Library 14 - 31
a. W series onlyb. Not for W series
15x18
COMPONENTSERIES
A & AW B & BW X & XW T & TW
Top Clamping (KI15/16) 1-3/8 N/A 1-3/8 N/A
Bottom Clamping(KI17) 7/8 7/8 7/8 7/8
Clamping/Cavity (KI18/19) N/A 1-7/8 to 5-7/8 N/A 1-7/8 to 5-7/8
Multi-Purpose Cavity (KI20) 1-3/8 to 5-7/8a 1-3/8 to 5-7/8a 1-3/8 to 5-7/8a 1-3/8 to 5-7/8
Multi-Purpose Cavity (KI24) N/A N/A 7/8 to 1-7/8 7/8 to 1-7/8
Cavity (KI21/22) 1-3/8 to 5-7/8 N/A 1-3/8 to 5-7/8 N/A
Core (KI23) 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b
Back Up (KI30/31) 2-3/8 N/A N/A 2-3/8
Spacer Blocks (KI40) 3 to 5 3 to 5 3 to 5 3 to 5
Ejector Retainer (KI60/62) 5/8 5/8 5/8 5/8
Ejector Plate (KI70) 1-1/4 1-1/4 1-1/4 1-1/4
15x23
COMPONENTSERIES
A & AW B & BW X & XW T & TW
Top Clamping (KI15/16) 1-3/8 N/A 1-3/8 N/A
Bottom Clamping(KI17) 7/8 7/8 7/8 7/8
Clamping/Cavity (KI18/19) N/A 2-3/8 to 5-7/8 N/A 2-3/8 to 5-7/8
Multi-Purpose Cavity (KI20) 1-3/8 to 5-7/8a 1-3/8 to 5-7/8a 1-3/8 to 5-7/8a 1-3/8 to 5-7/8
Multi-Purpose Cavity (KI24) N/A N/A 7/8 to 1-7/8 7/8 to 1-7/8
Cavity (KI21/22) 1-3/8 to 5-7/8 N/A 1-3/8 to 5-7/8 N/A
Core (KI23) 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b
Back Up (KI30/31) 2-3/8 N/A N/A 2-3/8
Spacer Blocks (KI40) 3 to 5 3 to 5 3 to 5 3 to 5
Ejector Retainer (KI60/62) 5/8 5/8 5/8 5/8
Ejector Plate (KI70) 1-1/4 1-1/4 1-1/4 1-1/4
HASCO STANDARD MOLD BASE ASSEMBLIES
14 - 32 Mold Base Library
a. W series onlyb. Not for W series
15x26
COMPONENTSERIES
A & AW B & BW X & XW T & TW
Top Clamping (KI15/16) 1-3/8 N/A 1-3/8 N/A
Bottom Clamping(KI17) 7/8 7/8 7/8 7/8
Clamping/Cavity (KI18/19) N/A 2-3/8 to 5-7/8 N/A 2-3/8 to 5-7/8
Multi-Purpose Cavity (KI20) 1-3/8 to 5-7/8a 1-3/8 to 5-7/8a 1-3/8 to 5-7/8a 1-3/8 to 5-7/8
Multi-Purpose Cavity (KI24) N/A N/A 7/8 to 1-7/8 7/8 to 1-7/8
Cavity (KI21/22) 1-3/8 to 5-7/8 N/A 1-3/8 to 5-7/8 N/A
Core (KI23) 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b
Back Up (KI30/31) 2-3/8 N/A N/A 2-3/8
Spacer Blocks (KI40) 3 to 5 3 to 5 3 to 5 3 to 5
Ejector Retainer (KI60/62) 5/8 5/8 5/8 5/8
Ejector Plate (KI70) 1-1/4 1-1/4 1-1/4 1-1/4
15x29
COMPONENTSERIES
A & AW B & BW X & XW T & TW
Top Clamping (KI15/16) 1-3/8 N/A 1-3/8 N/A
Bottom Clamping(KI17) 7/8 7/8 7/8 7/8
Clamping/Cavity (KI18/19) N/A 2-3/8 to 5-7/8 N/A 2-3/8 to 5-7/8
Multi-Purpose Cavity (KI20) 1-3/8 to 5-7/8a 1-3/8 to 5-7/8a 1-3/8 to 5-7/8a 1-3/8 to 5-7/8
Multi-Purpose Cavity (KI24) N/A N/A 7/8 to 1-7/8 7/8 to 1-7/8
Cavity (KI21/22) 1-3/8 to 5-7/8 N/A 1-3/8 to 5-7/8 N/A
Core (KI23) 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b
Back Up (KI30/31) 2-3/8 N/A N/A 2-3/8
Spacer Blocks (KI40) 3 to 5 3 to 5 3 to 5 3 to 5
Ejector Retainer (KI60/62) 5/8 5/8 5/8 5/8
Ejector Plate (KI70) 1-1/4 1-1/4 1-1/4 1-1/4
HASCO STANDARD MOLD BASE ASSEMBLIES
Mold Base Library 14 - 33
a. W series onlyb. Not for W series
16x16
COMPONENTSERIES
A & AW B & BW X & XW T & TW
Top Clamping (KI15/16) 1-3/8 N/A 1-3/8 N/A
Bottom Clamping(KI17) 7/8 7/8 7/8 7/8
Clamping/Cavity (KI18/19) N/A 1-7/8 to 5-7/8 N/A 1-7/8 to 5-7/8
Multi-Purpose Cavity (KI20) 1-3/8 to 5-7/8a 1-3/8 to 5-7/8a 1-3/8 to 5-7/8a 1-3/8 to 5-7/8
Multi-Purpose Cavity (KI24) N/A N/A 7/8 to 1-7/8 7/8 to 1-7/8
Cavity (KI21/22) 1-3/8 to 5-7/8 N/A 1-3/8 to 5-7/8 N/A
Core (KI23) 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b
Back Up (KI30/31) 2-3/8 N/A N/A 2-3/8
Spacer Blocks (KI40) 3 to 5 3 to 5 3 to 5 3 to 5
Ejector Retainer (KI60/62) 5/8 5/8 5/8 5/8
Ejector Plate (KI70) 1-1/4 1-1/4 1-1/4 1-1/4
16x20
COMPONENTSERIES
A & AW B & BW X & XW T & TW
Top Clamping (KI15/16) 1-3/8 N/A 1-3/8 N/A
Bottom Clamping(KI17) 7/8 7/8 7/8 7/8
Clamping/Cavity (KI18/19) N/A 2-3/8 to 5-7/8 N/A 2-3/8 to 5-7/8
Multi-Purpose Cavity (KI20) 1-3/8 to 5-7/8a 1-3/8 to 5-7/8a 1-3/8 to 5-7/8a 1-3/8 to 5-7/8
Multi-Purpose Cavity (KI24) N/A N/A 7/8 to 1-7/8 7/8 to 1-7/8
Cavity (KI21/22) 1-3/8 to 5-7/8 N/A 1-3/8 to 5-7/8 N/A
Core (KI23) 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b
Back Up (KI30/31) 2-3/8 N/A N/A 2-3/8
Spacer Blocks (KI40) 3 to 5 3 to 5 3 to 5 3 to 5
Ejector Retainer (KI60/62) 5/8 5/8 5/8 5/8
Ejector Plate (KI70) 1-1/4 1-1/4 1-1/4 1-1/4
HASCO STANDARD MOLD BASE ASSEMBLIES
14 - 34 Mold Base Library
a. W series onlyb. Not for W series
16x23
COMPONENTSERIES
A & AW B & BW X & XW T & TW
Top Clamping (KI15/16) 1-3/8 N/A 1-3/8 N/A
Bottom Clamping(KI17) 7/8 7/8 7/8 7/8
Clamping/Cavity (KI18/19) N/A 2-3/8 to 5-7/8 N/A 2-3/8 to 5-7/8
Multi-Purpose Cavity (KI20) 1-3/8 to 5-7/8a 1-3/8 to 5-7/8a 1-3/8 to 5-7/8a 1-3/8 to 5-7/8
Multi-Purpose Cavity (KI24) N/A N/A 7/8 to 1-7/8 7/8 to 1-7/8
Cavity (KI21/22) 1-3/8 to 5-7/8 N/A 1-3/8 to 5-7/8 N/A
Core (KI23) 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b
Back Up (KI30/31) 2-3/8 N/A N/A 2-3/8
Spacer Blocks (KI40) 3 to 5 3 to 5 3 to 5 3 to 5
Ejector Retainer (KI60/62) 5/8 5/8 5/8 5/8
Ejector Plate (KI70) 1-1/4 1-1/4 1-1/4 1-1/4
16x26
COMPONENTSERIES
A & AW B & BW X & XW T & TW
Top Clamping (KI15/16) 1-3/8 N/A 1-3/8 N/A
Bottom Clamping(KI17) 7/8 7/8 7/8 7/8
Clamping/Cavity (KI18/19) N/A 2-3/8 to 5-7/8 N/A 2-3/8 to 5-7/8
Multi-Purpose Cavity (KI20) 1-3/8 to 5-7/8a 1-3/8 to 5-7/8a 1-3/8 to 5-7/8a 1-3/8 to 5-7/8
Multi-Purpose Cavity (KI24) N/A N/A 7/8 to 1-7/8 7/8 to 1-7/8
Cavity (KI21/22) 1-3/8 to 5-7/8 N/A 1-3/8 to 5-7/8 N/A
Core (KI23) 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b
Back Up (KI30/31) 2-3/8 N/A N/A 2-3/8
Spacer Blocks (KI40) 3 to 5 3 to 5 3 to 5 3 to 5
Ejector Retainer (KI60/62) 5/8 5/8 5/8 5/8
Ejector Plate (KI70) 1-1/4 1-1/4 1-1/4 1-1/4
HASCO STANDARD MOLD BASE ASSEMBLIES
Mold Base Library 14 - 35
a. W series onlyb. Not for W series
16x29
COMPONENTSERIES
A & AW B & BW X & XW T & TW
Top Clamping (KI15/16) 1-3/8 N/A 1-3/8 N/A
Bottom Clamping(KI17) 7/8 7/8 7/8 7/8
Clamping/Cavity (KI18/19) N/A 2-3/8 to 5-7/8 N/A 2-3/8 to 5-7/8
Multi-Purpose Cavity (KI20) 1-3/8 to 5-7/8a 1-3/8 to 5-7/8a 1-3/8 to 5-7/8a 1-3/8 to 5-7/8
Multi-Purpose Cavity (KI24) N/A N/A 7/8 to 1-7/8 7/8 to 1-7/8
Cavity (KI21/22) 1-3/8 to 5-7/8 N/A 1-3/8 to 5-7/8 N/A
Core (KI23) 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b
Back Up (KI30/31) 2-3/8 N/A N/A 2-3/8
Spacer Blocks (KI40) 3 to 5 3 to 5 3 to 5 3 to 5
Ejector Retainer (KI60/62) 5/8 5/8 5/8 5/8
Ejector Plate (KI70) 1-1/4 1-1/4 1-1/4 1-1/4
16x35
COMPONENTSERIES
A & AW B & BW X & XW T & TW
Top Clamping (KI15/16) 1-3/8 N/A 1-3/8 N/A
Bottom Clamping(KI17) 7/8 7/8 7/8 7/8
Clamping/Cavity (KI18/19) N/A 2-3/8 to 5-7/8 N/A 2-3/8 to 5-7/8
Multi-Purpose Cavity (KI20) 1-3/8 to 5-7/8a 1-3/8 to 5-7/8a 1-3/8 to 5-7/8a 1-3/8 to 5-7/8
Multi-Purpose Cavity (KI24) N/A N/A 7/8 to 1-7/8 7/8 to 1-7/8
Cavity (KI21/22) 1-3/8 to 5-7/8 N/A 1-3/8 to 5-7/8 N/A
Core (KI23) 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b
Back Up (KI30/31) 2-3/8 N/A N/A 2-3/8
Spacer Blocks (KI40) 3 to 5 3 to 5 3 to 5 3 to 5
Ejector Retainer (KI60/62) 5/8 5/8 5/8 5/8
Ejector Plate (KI70) 1-1/4 1-1/4 1-1/4 1-1/4
HASCO STANDARD MOLD BASE ASSEMBLIES
14 - 36 Mold Base Library
a. W series onlyb. Not for W series
18x18
COMPONENTSERIES
A & AW B & BW X & XW T & TW
Top Clamping (KI15/16) 1-3/8 N/A 1-3/8 N/A
Bottom Clamping(KI17) 7/8 7/8 7/8 7/8
Clamping/Cavity (KI18/19) N/A 2-3/8 to 5-7/8 N/A 2-3/8 to 5-7/8
Multi-Purpose Cavity (KI20) 1-3/8 to 5-7/8a 1-3/8 to 5-7/8a 1-3/8 to 5-7/8a 1-3/8 to 5-7/8
Multi-Purpose Cavity (KI24) N/A N/A 7/8 to 1-7/8 7/8 to 1-7/8
Cavity (KI21/22) 1-3/8 to 5-7/8 N/A 1-3/8 to 5-7/8 N/A
Core (KI23) 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b
Back Up (KI30/31) 2-3/8 N/A N/A 2-3/8
Spacer Blocks (KI40) 3 to 5 3 to 5 3 to 5 3 to 5
Ejector Retainer (KI60/62) 5/8 5/8 5/8 5/8
Ejector Plate (KI70) 1-1/4 1-1/4 1-1/4 1-1/4
18x20
COMPONENTSERIES
A & AW B & BW X & XW T & TW
Top Clamping (KI15/16) 1-3/8 N/A 1-3/8 N/A
Bottom Clamping(KI17) 7/8 7/8 7/8 7/8
Clamping/Cavity (KI18/19) N/A 2-3/8 to 5-7/8 N/A 2-3/8 to 5-7/8
Multi-Purpose Cavity (KI20) 1-3/8 to 5-7/8a 1-3/8 to 5-7/8a 1-3/8 to 5-7/8a 1-3/8 to 5-7/8
Multi-Purpose Cavity (KI24) N/A N/A 7/8 to 1-7/8 7/8 to 1-7/8
Cavity (KI21/22) 1-3/8 to 5-7/8 N/A 1-3/8 to 5-7/8 N/A
Core (KI23) 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b
Back Up (KI30/31) 2-3/8 N/A N/A 2-3/8
Spacer Blocks (KI40) 3 to 5 3 to 5 3 to 5 3 to 5
Ejector Retainer (KI60/62) 5/8 5/8 5/8 5/8
Ejector Plate (KI70) 1-1/4 1-1/4 1-1/4 1-1/4
HASCO STANDARD MOLD BASE ASSEMBLIES
Mold Base Library 14 - 37
a. W series onlyb. Not for W series
18x23
COMPONENTSERIES
A & AW B & BW X & XW T & TW
Top Clamping (KI15/16) 1-3/8 N/A 1-3/8 N/A
Bottom Clamping(KI17) 7/8 7/8 7/8 7/8
Clamping/Cavity (KI18/19) N/A 2-3/8 to 5-7/8 N/A 2-3/8 to 5-7/8
Multi-Purpose Cavity (KI20) 1-3/8 to 5-7/8a 1-3/8 to 5-7/8a 1-3/8 to 5-7/8a 1-3/8 to 5-7/8
Multi-Purpose Cavity (KI24) N/A N/A 7/8 to 1-7/8 7/8 to 1-7/8
Cavity (KI21/22) 1-3/8 to 5-7/8 N/A 1-3/8 to 5-7/8 N/A
Core (KI23) 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b
Back Up (KI30/31) 2-3/8 N/A N/A 2-3/8
Spacer Blocks (KI40) 3 to 5 3 to 5 3 to 5 3 to 5
Ejector Retainer (KI60/62) 5/8 5/8 5/8 5/8
Ejector Plate (KI70) 1-1/4 1-1/4 1-1/4 1-1/4
18x26
COMPONENTSERIES
A & AW B & BW X & XW T & TW
Top Clamping (KI15/16) 1-3/8 N/A 1-3/8 N/A
Bottom Clamping(KI17) 7/8 7/8 7/8 7/8
Clamping/Cavity (KI18/19) N/A 2-3/8 to 5-7/8 N/A 2-3/8 to 5-7/8
Multi-Purpose Cavity (KI20) 1-3/8 to 5-7/8a 1-3/8 to 5-7/8a 1-3/8 to 5-7/8a 1-3/8 to 5-7/8
Multi-Purpose Cavity (KI24) N/A N/A 7/8 to 1-7/8 7/8 to 1-7/8
Cavity (KI21/22) 1-3/8 to 5-7/8 N/A 1-3/8 to 5-7/8 N/A
Core (KI23) 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b
Back Up (KI30/31) 2-3/8 N/A N/A 2-3/8
Spacer Blocks (KI40) 3 to 5 3 to 5 3 to 5 3 to 5
Ejector Retainer (KI60/62) 5/8 5/8 5/8 5/8
Ejector Plate (KI70) 1-1/4 1-1/4 1-1/4 1-1/4
HASCO STANDARD MOLD BASE ASSEMBLIES
14 - 38 Mold Base Library
a. W series onlyb. Not for W series
18x29
COMPONENTSERIES
A & AW B & BW X & XW T & TW
Top Clamping (KI15/16) 1-3/8 N/A 1-3/8 N/A
Bottom Clamping(KI17) 7/8 7/8 7/8 7/8
Clamping/Cavity (KI18/19) N/A 2-3/8 to 5-7/8 N/A 2-3/8 to 5-7/8
Multi-Purpose Cavity (KI20) 1-3/8 to 5-7/8a 1-3/8 to 5-7/8a 1-3/8 to 5-7/8a 1-3/8 to 5-7/8
Multi-Purpose Cavity (KI24) N/A N/A 7/8 to 1-7/8 7/8 to 1-7/8
Cavity (KI21/22) 1-3/8 to 5-7/8 N/A 1-3/8 to 5-7/8 N/A
Core (KI23) 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b
Back Up (KI30/31) 2-3/8 N/A N/A 2-3/8
Spacer Blocks (KI40) 3 to 5 3 to 5 3 to 5 3 to 5
Ejector Retainer (KI60/62) 5/8 5/8 5/8 5/8
Ejector Plate (KI70) 1-1/4 1-1/4 1-1/4 1-1/4
18x35
COMPONENTSERIES
A & AW B & BW X & XW T & TW
Top Clamping (KI15/16) 1-3/8 N/A 1-3/8 N/A
Bottom Clamping(KI17) 7/8 7/8 7/8 7/8
Clamping/Cavity (KI18/19) N/A 2-7/8 to 5-7/8 N/A 2-7/8 to 5-7/8
Multi-Purpose Cavity (KI20) 1-3/8 to 5-7/8a 1-3/8 to 5-7/8a 1-3/8 to 5-7/8a 1-3/8 to 5-7/8
Multi-Purpose Cavity (KI24) N/A N/A 7/8 to 1-7/8 7/8 to 1-7/8
Cavity (KI21/22) 1-3/8 to 5-7/8 N/A 1-3/8 to 5-7/8 N/A
Core (KI23) 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b
Back Up (KI30/31) 2-3/8 N/A N/A 2-3/8
Spacer Blocks (KI40) 3 to 5 3 to 5 3 to 5 3 to 5
Ejector Retainer (KI60/62) 5/8 5/8 5/8 5/8
Ejector Plate (KI70) 1-1/4 1-1/4 1-1/4 1-1/4
HASCO STANDARD MOLD BASE ASSEMBLIES
Mold Base Library 14 - 39
a. W series onlyb. Not for W series
19x20
COMPONENTSERIES
A & AW B & BW X & XW T & TW
Top Clamping (KI15/16) 1-3/8 N/A 1-3/8 N/A
Bottom Clamping(KI17) 7/8 7/8 7/8 7/8
Clamping/Cavity (KI18/19) N/A 2-3/8 to 5-7/8 N/A 2-3/8 to 5-7/8
Multi-Purpose Cavity (KI20) 1-3/8 to 5-7/8a 1-3/8 to 5-7/8a 1-3/8 to 5-7/8a 1-3/8 to 5-7/8
Multi-Purpose Cavity (KI24) N/A N/A 7/8 to 1-7/8 7/8 to 1-7/8
Cavity (KI21/22) 1-3/8 to 5-7/8 N/A 1-3/8 to 5-7/8 N/A
Core (KI23) 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b
Back Up (KI30/31) 2-3/8 N/A N/A 2-3/8
Spacer Blocks (KI40) 3 to 5 3 to 5 3 to 5 3 to 5
Ejector Retainer (KI60/62) 5/8 5/8 5/8 5/8
Ejector Plate (KI70) 1-1/4 1-1/4 1-1/4 1-1/4
19x24
COMPONENTSERIES
A & AW B & BW X & XW T & TW
Top Clamping (KI15/16) 1-3/8 N/A 1-3/8 N/A
Bottom Clamping(KI17) 7/8 7/8 7/8 7/8
Clamping/Cavity (KI18/19) N/A 2-3/8 to 5-7/8 N/A 2-3/8 to 5-7/8
Multi-Purpose Cavity (KI20) 1-3/8 to 5-7/8a 1-3/8 to 5-7/8a 1-3/8 to 5-7/8a 1-3/8 to 5-7/8
Multi-Purpose Cavity (KI24) N/A N/A 7/8 to 1-7/8 7/8 to 1-7/8
Cavity (KI21/22) 1-3/8 to 5-7/8 N/A 1-3/8 to 5-7/8 N/A
Core (KI23) 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b
Back Up (KI30/31) 2-3/8 N/A N/A 2-3/8
Spacer Blocks (KI40) 3 to 5 3 to 5 3 to 5 3 to 5
Ejector Retainer (KI60/62) 5/8 5/8 5/8 5/8
Ejector Plate (KI70) 1-1/4 1-1/4 1-1/4 1-1/4
HASCO STANDARD MOLD BASE ASSEMBLIES
14 - 40 Mold Base Library
a. W series onlyb. Not for W series
19x26
COMPONENTSERIES
A & AW B & BW X & XW T & TW
Top Clamping (KI15/16) 1-3/8 N/A 1-3/8 N/A
Bottom Clamping(KI17) 7/8 7/8 7/8 7/8
Clamping/Cavity (KI18/19) N/A 2-3/8 to 5-7/8 N/A 2-3/8 to 5-7/8
Multi-Purpose Cavity (KI20) 1-3/8 to 5-7/8a 1-3/8 to 5-7/8a 1-3/8 to 5-7/8a 1-3/8 to 5-7/8
Multi-Purpose Cavity (KI24) N/A N/A 7/8 to 1-7/8 7/8 to 1-7/8
Cavity (KI21/22) 1-3/8 to 5-7/8 N/A 1-3/8 to 5-7/8 N/A
Core (KI23) 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b
Back Up (KI30/31) 2-3/8 N/A N/A 2-3/8
Spacer Blocks (KI40) 3 to 5 3 to 5 3 to 5 3 to 5
Ejector Retainer (KI60/62) 5/8 5/8 5/8 5/8
Ejector Plate (KI70) 1-1/4 1-1/4 1-1/4 1-1/4
19x29
COMPONENTSERIES
A & AW B & BW X & XW T & TW
Top Clamping (KI15/16) 1-3/8 N/A 1-3/8 N/A
Bottom Clamping(KI17) 7/8 7/8 7/8 7/8
Clamping/Cavity (KI18/19) N/A 2-3/8 to 5-7/8 N/A 2-3/8 to 5-7/8
Multi-Purpose Cavity (KI20) 1-3/8 to 5-7/8a 1-3/8 to 5-7/8a 1-3/8 to 5-7/8a 1-3/8 to 5-7/8
Multi-Purpose Cavity (KI24) N/A N/A 7/8 to 1-7/8 7/8 to 1-7/8
Cavity (KI21/22) 1-3/8 to 5-7/8 N/A 1-3/8 to 5-7/8 N/A
Core (KI23) 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b
Back Up (KI30/31) 2-3/8 N/A N/A 2-3/8
Spacer Blocks (KI40) 3 to 5 3 to 5 3 to 5 3 to 5
Ejector Retainer (KI60/62) 5/8 5/8 5/8 5/8
Ejector Plate (KI70) 1-1/4 1-1/4 1-1/4 1-1/4
HASCO STANDARD MOLD BASE ASSEMBLIES
Mold Base Library 14 - 41
a. W series onlyb. Not for W series
19x35
COMPONENTSERIES
A & AW B & BW X & XW T & TW
Top Clamping (KI15/16) 1-3/8 N/A 1-3/8 N/A
Bottom Clamping(KI17) 7/8 7/8 7/8 7/8
Clamping/Cavity (KI18/19) N/A 2-7/8 to 5-7/8 N/A 2-7/8 to 5-7/8
Multi-Purpose Cavity (KI20) 1-3/8 to 5-7/8a 1-3/8 to 5-7/8a 1-3/8 to 5-7/8a 1-3/8 to 5-7/8
Multi-Purpose Cavity (KI24) N/A N/A 7/8 to 1-7/8 7/8 to 1-7/8
Cavity (KI21/22) 1-3/8 to 5-7/8 N/A 1-3/8 to 5-7/8 N/A
Core (KI23) 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b
Back Up (KI30/31) 2-3/8 N/A N/A 2-3/8
Spacer Blocks (KI40) 3 to 5 3 to 5 3 to 5 3 to 5
Ejector Retainer (KI60/62) 5/8 5/8 5/8 5/8
Ejector Plate (KI70) 1-1/4 1-1/4 1-1/4 1-1/4
24x24
COMPONENTSERIES
A & AW B & BW X & XW T & TW
Top Clamping (KI15/16) 1-3/8 N/A 1-3/8 N/A
Bottom Clamping(KI17) 1-3/8 1-3/8 1-3/8 1-3/8
Clamping/Cavity (KI18/19) N/A 2-3/8 to 5-7/8 N/A 2-3/8 to 5-7/8
Multi-Purpose Cavity (KI20) 1-3/8 to 5-7/8a 1-3/8 to 5-7/8a 1-3/8 to 5-7/8a 1-3/8 to 5-7/8
Multi-Purpose Cavity (KI24) N/A N/A 7/8 to 1-7/8 7/8 to 1-7/8
Cavity (KI21/22) 1-3/8 to 5-7/8 N/A 1-3/8 to 5-7/8 N/A
Core (KI23) 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b
Back Up (KI30/31) 2-3/8 N/A N/A 2-3/8
Spacer Blocks (KI40) 3 to 5 3 to 5 3 to 5 3 to 5
Ejector Retainer (KI60/62) 5/8 5/8 5/8 5/8
Ejector Plate (KI70) 1-1/4 1-1/4 1-1/4 1-1/4
HASCO STANDARD MOLD BASE ASSEMBLIES
14 - 42 Mold Base Library
a. W series onlyb. Not for W series
24x26
COMPONENTSERIES
A & AW B & BW X & XW T & TW
Top Clamping (KI15/16) 1-3/8 N/A 1-3/8 N/A
Bottom Clamping(KI17) 1-3/8 1-3/8 1-3/8 1-3/8
Clamping/Cavity (KI18/19) N/A 2-3/8 to 5-7/8 N/A 2-3/8 to 5-7/8
Multi-Purpose Cavity (KI20) 1-3/8 to 5-7/8a 1-3/8 to 5-7/8a 1-3/8 to 5-7/8a 1-3/8 to 5-7/8
Multi-Purpose Cavity (KI24) N/A N/A 7/8 to 1-7/8 7/8 to 1-7/8
Cavity (KI21/22) 1-3/8 to 5-7/8 N/A 1-3/8 to 5-7/8 N/A
Core (KI23) 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b
Back Up (KI30/31) 2-3/8 N/A N/A 2-3/8
Spacer Blocks (KI40) 3 to 5 3 to 5 3 to 5 3 to 5
Ejector Retainer (KI60/62) 5/8 5/8 5/8 5/8
Ejector Plate (KI70) 1-1/4 1-1/4 1-1/4 1-1/4
24x29
COMPONENTSERIES
A & AW B & BW X & XW T & TW
Top Clamping (KI15/16) 1-3/8 N/A 1-3/8 N/A
Bottom Clamping(KI17) 1-3/8 1-3/8 1-3/8 1-3/8
Clamping/Cavity (KI18/19) N/A 2-7/8 to 5-7/8 N/A 2-7/8 to 5-7/8
Multi-Purpose Cavity (KI20) 1-3/8 to 5-7/8a 1-3/8 to 5-7/8a 1-3/8 to 5-7/8a 1-3/8 to 5-7/8
Multi-Purpose Cavity (KI24) N/A N/A 7/8 to 1-7/8 7/8 to 1-7/8
Cavity (KI21/22) 1-3/8 to 5-7/8 N/A 1-3/8 to 5-7/8 N/A
Core (KI23) 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b
Back Up (KI30/31) 2-3/8 N/A N/A 2-3/8
Spacer Blocks (KI40) 3 to 5 3 to 5 3 to 5 3 to 5
Ejector Retainer (KI60/62) 5/8 5/8 5/8 5/8
Ejector Plate (KI70) 1-1/4 1-1/4 1-1/4 1-1/4
HASCO STANDARD MOLD BASE ASSEMBLIES
Mold Base Library 14 - 43
a. W series onlyb. Not for W series
24x35
COMPONENTSERIES
A & AW B & BW X & XW T & TW
Top Clamping (KI15/16) 1-3/8 N/A 1-3/8 N/A
Bottom Clamping(KI17) 1-3/8 1-3/8 1-3/8 1-3/8
Clamping/Cavity (KI18/19) N/A 2-7/8 to 5-7/8 N/A 2-7/8 to 5-7/8
Multi-Purpose Cavity (KI20) 1-3/8 to 5-7/8a 1-3/8 to 5-7/8a 1-3/8 to 5-7/8a 1-3/8 to 5-7/8
Multi-Purpose Cavity (KI24) N/A N/A 7/8 to 1-7/8 7/8 to 1-7/8
Cavity (KI21/22) 1-3/8 to 5-7/8 N/A 1-3/8 to 5-7/8 N/A
Core (KI23) 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b 1-3/8 to 5-7/8b
Back Up (KI30/31) 2-3/8 N/A N/A 2-3/8
Spacer Blocks (KI40) 3 to 5 3 to 5 3 to 5 3 to 5
Ejector Retainer (KI60/62) 5/8 5/8 5/8 5/8
Ejector Plate (KI70) 1-1/4 1-1/4 1-1/4 1-1/4
Mold Base Library 15 - 1
13HASCO BUSHINGS
BUSHING, CATALOG NO. ZI10
Generic Part Name: ZI10
InstanceName
S2 d_1 l l1 k d_3 d_4
Z10_010 12.0000 9.0000 7.0000 15.0000 3.0000 14.0000 16.0000
Z10_011 17.0000 9.0000 7.0000 20.0000 3.0000 14.0000 16.0000
Z10_012 22.0000 9.0000 7.0000 25.0000 3.0000 14.0000 16.0000
Z10_013 27.0000 9.0000 7.0000 30.0000 3.0000 14.0000 16.0000
Z10_014 36.0000 9.0000 7.0000 39.0000 3.0000 14.0000 16.0000
Z10_015 46.0000 9.0000 46.0000 49.0000 3.0000 14.0000 16.0000
Z10_016 56.0000 9.0000 46.0000 59.0000 3.0000 14.0000 16.0000
Z10_017 66.0000 9.0000 46.0000 69.0000 3.0000 14.0000 16.0000
Z10_018 12.0000 10.0000 46.0000 15.0000 3.0000 14.0000 16.0000
Z10_019 17.0000 10.0000 46.0000 20.0000 3.0000 14.0000 16.0000
Z10_020 22.0000 10.0000 46.0000 25.0000 3.0000 14.0000 16.0000
Z10_021 27.0000 10.0000 46.0000 30.0000 3.0000 14.0000 16.0000
Z10_022 36.0000 10.0000 46.0000 39.0000 3.0000 14.0000 16.0000
Z10_023 46.0000 10.0000 46.0000 49.0000 3.0000 14.0000 16.0000
HASCO BUSHINGS
15 - 2 Mold Base Library
Z10_024 56.0000 10.0000 46.0000 59.0000 3.0000 14.0000 16.0000
Z10_025 66.0000 10.0000 46.0000 69.0000 3.0000 14.0000 16.0000
Z10_026 17.0000 14.0000 46.0000 26.0000 6.0000 20.0000 25.0000
Z10_027 22.0000 14.0000 46.0000 31.0000 6.0000 20.0000 25.0000
Z10_028 27.0000 14.0000 46.0000 36.0000 6.0000 20.0000 25.0000
Z10_029 36.0000 14.0000 46.0000 45.0000 6.0000 20.0000 25.0000
Z10_030 46.0000 14.0000 46.0000 55.0000 6.0000 20.0000 25.0000
Z10_031 17.0000 15.0000 46.0000 26.0000 6.0000 20.0000 25.0000
Z10_032 22.0000 15.0000 46.0000 31.0000 6.0000 20.0000 25.0000
Z10_033 27.0000 15.0000 46.0000 36.0000 6.0000 20.0000 25.0000
Z10_034 36.0000 15.0000 46.0000 45.0000 6.0000 20.0000 25.0000
Z10_035 46.0000 15.0000 46.0000 55.0000 6.0000 20.0000 25.0000
Z10_036 56.0000 14.0000 56.0000 65.0000 6.0000 20.0000 25.0000
Z10_037 66.0000 14.0000 56.0000 75.0000 6.0000 20.0000 25.0000
Z10_038 76.0000 14.0000 56.0000 85.0000 6.0000 20.0000 25.0000
Z10_039 86.0000 14.0000 56.0000 95.0000 6.0000 20.0000 25.0000
Z10_040 96.0000 14.0000 56.0000 105.0000 6.0000 20.0000 25.0000
Z10_041 116.0000 14.0000 56.0000 125.0000 6.0000 20.0000 25.0000
Z10_042 56.0000 15.0000 56.0000 65.0000 6.0000 20.0000 25.0000
Z10_043 66.0000 15.0000 56.0000 75.0000 6.0000 20.0000 25.0000
Z10_044 76.0000 15.0000 56.0000 85.0000 6.0000 20.0000 25.0000
Z10_045 86.0000 15.0000 56.0000 95.0000 6.0000 20.0000 25.0000
Z10_046 96.0000 15.0000 56.0000 105.0000 6.0000 20.0000 25.0000
Z10_047 116.0000 15.0000 56.0000 125.0000 6.0000 20.0000 25.0000
Z10_048 17.0000 18.0000 56.0000 26.0000 6.0000 26.0000 31.0000
Z10_049 22.0000 18.0000 56.0000 31.0000 6.0000 26.0000 31.0000
Z10_050 27.0000 18.0000 56.0000 36.0000 6.0000 26.0000 31.0000
Z10_051 36.0000 18.0000 56.0000 45.0000 6.0000 26.0000 31.0000
Z10_052 46.0000 18.0000 56.0000 55.0000 6.0000 26.0000 31.0000
Z10_053 56.0000 18.0000 56.0000 65.0000 6.0000 26.0000 31.0000
InstanceName
S2 d_1 l l1 k d_3 d_4
HASCO BUSHINGS
Mold Base Library 15 - 3
Z10_054 17.0000 20.0000 56.0000 26.0000 6.0000 26.0000 31.0000
Z10_055 22.0000 20.0000 56.0000 31.0000 6.0000 26.0000 31.0000
Z10_056 27.0000 20.0000 56.0000 36.0000 6.0000 26.0000 31.0000
Z10_057 36.0000 20.0000 56.0000 45.0000 6.0000 26.0000 31.0000
Z10_058 46.0000 20.0000 56.0000 55.0000 6.0000 26.0000 31.0000
Z10_059 56.0000 20.0000 56.0000 65.0000 6.0000 26.0000 31.0000
Z10_060 66.0000 18.0000 56.0000 75.0000 6.0000 26.0000 31.0000
Z10_061 76.0000 18.0000 76.0000 85.0000 6.0000 26.0000 31.0000
Z10_062 86.0000 18.0000 76.0000 95.0000 6.0000 26.0000 31.0000
Z10_063 96.0000 18.0000 76.0000 105.0000 6.0000 26.0000 31.0000
Z10_064 116.0000 18.0000 76.0000 125.0000 6.0000 26.0000 31.0000
Z10_065 136.0000 18.0000 76.0000 145.0000 6.0000 26.0000 31.0000
Z10_066 66.0000 20.0000 76.0000 75.0000 6.0000 26.0000 31.0000
Z10_067 76.0000 20.0000 76.0000 85.0000 6.0000 26.0000 31.0000
Z10_068 86.0000 20.0000 76.0000 95.0000 6.0000 26.0000 31.0000
Z10_069 96.0000 20.0000 76.0000 105.0000 6.0000 26.0000 31.0000
Z10_070 116.0000 20.0000 76.0000 125.0000 6.0000 26.0000 31.0000
Z10_071 136.0000 20.0000 76.0000 145.0000 6.0000 26.0000 31.0000
Z10_072 17.0000 22.0000 76.0000 26.0000 6.0000 30.0000 35.0000
Z10_073 22.0000 22.0000 76.0000 31.0000 6.0000 30.0000 35.0000
Z10_074 27.0000 22.0000 76.0000 36.0000 6.0000 30.0000 35.0000
Z10_075 36.0000 22.0000 76.0000 45.0000 6.0000 30.0000 35.0000
Z10_076 46.0000 22.0000 76.0000 55.0000 6.0000 30.0000 35.0000
Z10_077 56.0000 22.0000 76.0000 65.0000 6.0000 30.0000 35.0000
Z10_078 17.0000 24.0000 76.0000 26.0000 6.0000 30.0000 35.0000
Z10_079 22.0000 24.0000 76.0000 31.0000 6.0000 30.0000 35.0000
Z10_080 27.0000 24.0000 76.0000 36.0000 6.0000 30.0000 35.0000
Z10_081 36.0000 24.0000 76.0000 45.0000 6.0000 30.0000 35.0000
Z10_082 46.0000 24.0000 76.0000 55.0000 6.0000 30.0000 35.0000
Z10_083 56.0000 24.0000 76.0000 65.0000 6.0000 30.0000 35.0000
InstanceName
S2 d_1 l l1 k d_3 d_4
HASCO BUSHINGS
15 - 4 Mold Base Library
Z10_084 66.0000 22.0000 76.0000 75.0000 6.0000 30.0000 35.0000
Z10_085 76.0000 22.0000 76.0000 85.0000 6.0000 30.0000 35.0000
Z10_086 86.0000 22.0000 76.0000 95.0000 6.0000 30.0000 35.0000
Z10_087 96.0000 22.0000 76.0000 105.0000 6.0000 30.0000 35.0000
Z10_088 116.0000 22.0000 96.0000 125.0000 6.0000 30.0000 35.0000
Z10_089 136.0000 22.0000 96.0000 145.0000 6.0000 30.0000 35.0000
Z10_090 156.0000 22.0000 96.0000 165.0000 6.0000 30.0000 35.0000
Z10_091 66.0000 24.0000 96.0000 75.0000 6.0000 30.0000 35.0000
Z10_092 76.0000 24.0000 96.0000 85.0000 6.0000 30.0000 35.0000
Z10_093 86.0000 24.0000 96.0000 95.0000 6.0000 30.0000 35.0000
Z10_094 96.0000 24.0000 96.0000 105.0000 6.0000 30.0000 35.0000
Z10_095 116.0000 24.0000 96.0000 125.0000 6.0000 30.0000 35.0000
Z10_096 136.0000 24.0000 96.0000 145.0000 6.0000 30.0000 35.0000
Z10_097 156.0000 24.0000 96.0000 165.0000 6.0000 30.0000 35.0000
Z10_098 27.0000 30.0000 96.0000 36.0000 6.0000 42.0000 47.0000
Z10_099 36.0000 30.0000 96.0000 45.0000 6.0000 42.0000 47.0000
Z10_100 46.0000 30.0000 96.0000 55.0000 6.0000 42.0000 47.0000
Z10_101 56.0000 30.0000 96.0000 65.0000 6.0000 42.0000 47.0000
Z10_102 66.0000 30.0000 96.0000 75.0000 6.0000 42.0000 47.0000
Z10_103 76.0000 30.0000 96.0000 85.0000 6.0000 42.0000 47.0000
Z10_104 86.0000 30.0000 96.0000 95.0000 6.0000 42.0000 47.0000
Z10_105 96.0000 30.0000 96.0000 105.0000 6.0000 42.0000 47.0000
Z10_106 116.0000 30.0000 96.0000 125.0000 6.0000 42.0000 47.0000
Z10_107 136.0000 30.0000 116.0000 145.0000 6.0000 42.0000 47.0000
Z10_108 156.0000 30.0000 116.0000 165.0000 6.0000 42.0000 47.0000
Z10_109 196.0000 30.0000 116.0000 205.0000 6.0000 42.0000 47.0000
Z10_110 27.0000 32.0000 116.0000 36.0000 6.0000 42.0000 47.0000
Z10_111 36.0000 32.0000 116.0000 45.0000 6.0000 42.0000 47.0000
Z10_112 46.0000 32.0000 116.0000 55.0000 6.0000 42.0000 47.0000
Z10_113 56.0000 32.0000 116.0000 65.0000 6.0000 42.0000 47.0000
InstanceName
S2 d_1 l l1 k d_3 d_4
HASCO BUSHINGS
Mold Base Library 15 - 5
Z10_114 66.0000 32.0000 116.0000 75.0000 6.0000 42.0000 47.0000
Z10_115 76.0000 32.0000 116.0000 85.0000 6.0000 42.0000 47.0000
Z10_116 86.0000 32.0000 116.0000 95.0000 6.0000 42.0000 47.0000
Z10_117 96.0000 32.0000 116.0000 105.0000 6.0000 42.0000 47.0000
Z10_118 116.0000 32.0000 116.0000 125.0000 6.0000 42.0000 47.0000
Z10_119 136.0000 32.0000 116.0000 145.0000 6.0000 42.0000 47.0000
Z10_120 156.0000 32.0000 116.0000 165.0000 6.0000 42.0000 47.0000
Z10_121 196.0000 32.0000 116.0000 205.0000 6.0000 42.0000 47.0000
Z10_122 46.0000 40.0000 116.0000 58.0000 10.0000 54.0000 60.0000
Z10_123 56.0000 40.0000 116.0000 68.0000 10.0000 54.0000 60.0000
Z10_124 66.0000 40.0000 116.0000 78.0000 10.0000 54.0000 60.0000
Z10_125 76.0000 40.0000 116.0000 88.0000 10.0000 54.0000 60.0000
Z10_126 86.0000 40.0000 116.0000 98.0000 10.0000 54.0000 60.0000
Z10_127 96.0000 40.0000 116.0000 108.0000 10.0000 54.0000 60.0000
Z10_128 116.0000 40.0000 116.0000 128.0000 10.0000 54.0000 60.0000
Z10_129 136.0000 40.0000 136.0000 148.0000 10.0000 54.0000 60.0000
Z10_130 156.0000 40.0000 136.0000 168.0000 10.0000 54.0000 60.0000
Z10_131 196.0000 40.0000 136.0000 208.0000 10.0000 54.0000 60.0000
Z10_132 246.0000 40.0000 136.0000 258.0000 10.0000 54.0000 60.0000
Z10_133 46.0000 42.0000 136.0000 58.0000 10.0000 54.0000 60.0000
Z10_134 56.0000 42.0000 136.0000 68.0000 10.0000 54.0000 60.0000
Z10_135 66.0000 42.0000 136.0000 78.0000 10.0000 54.0000 60.0000
Z10_136 76.0000 42.0000 136.0000 88.0000 10.0000 54.0000 60.0000
Z10_137 86.0000 42.0000 136.0000 98.0000 10.0000 54.0000 60.0000
Z10_138 96.0000 42.0000 136.0000 108.0000 10.0000 54.0000 60.0000
Z10_139 116.0000 42.0000 136.0000 128.0000 10.0000 54.0000 60.0000
Z10_140 136.0000 42.0000 136.0000 148.0000 10.0000 54.0000 60.0000
Z10_141 156.0000 42.0000 136.0000 168.0000 10.0000 54.0000 60.0000
Z10_142 196.0000 42.0000 136.0000 208.0000 10.0000 54.0000 60.0000
Z10_143 246.0000 42.0000 136.0000 258.0000 10.0000 54.0000 60.0000
InstanceName
S2 d_1 l l1 k d_3 d_4
HASCO BUSHINGS
15 - 6 Mold Base Library
BUSHING, CATALOG NO. ZI11
Generic Part Name: ZI11
InstanceName
S2 d_1 d_3 k d_4
ZI11_001 0.8750 0.8750 1.1250 0.2500 1.2500
ZI11_002 1.3750 0.8750 1.1250 0.2500 1.2500
ZI11_003 1.8750 0.8750 1.1250 0.2500 1.2500
ZI11_004 2.3750 0.8750 1.1250 0.2500 1.2500
ZI11_005 2.8750 0.8750 1.1250 0.2500 1.2500
ZI11_006 3.3750 0.8750 1.1250 0.2500 1.2500
ZI11_007 3.8750 0.8750 1.1250 0.2500 1.2500
ZI11_008 4.3750 0.8750 1.1250 0.2500 1.2500
ZI11_009 0.8750 0.9380 1.2500 0.2500 1.3750
ZI11_010 1.3750 0.9380 1.2500 0.2500 1.3750
ZI11_011 1.8750 0.9380 1.2500 0.2500 1.3750
ZI11_012 2.3750 0.9380 1.2500 0.2500 1.3750
ZI11_013 2.8750 0.9380 1.2500 0.2500 1.3750
ZI11_014 3.3750 0.9380 1.2500 0.2500 1.3750
ZI11_015 3.8750 0.9380 1.2500 0.2500 1.3750
ZI11_016 4.3750 0.9380 1.2500 0.2500 1.3750
ZI11_017 4.8750 0.9380 1.2500 0.2500 1.3750
HASCO BUSHINGS
Mold Base Library 15 - 7
ZI11_018 5.8750 0.9380 1.2500 0.2500 1.3750
ZI11_019 0.8750 1.0000 1.2500 0.2500 1.3750
ZI11_020 1.3750 1.0000 1.2500 0.2500 1.3750
ZI11_021 1.8750 1.0000 1.2500 0.2500 1.3750
ZI11_022 2.3750 1.0000 1.2500 0.2500 1.3750
ZI11_023 2.8750 1.0000 1.2500 0.2500 1.3750
ZI11_024 3.3750 1.0000 1.2500 0.2500 1.3750
ZI11_025 3.8750 1.0000 1.2500 0.2500 1.3750
ZI11_026 4.3750 1.0000 1.2500 0.2500 1.3750
ZI11_027 4.8750 1.0000 1.2500 0.2500 1.3750
ZI11_028 5.8750 1.0000 1.2500 0.2500 1.3750
ZI11_029 0.8750 1.1880 1.5000 0.3120 1.6250
ZI11_030 1.3750 1.1880 1.5000 0.3120 1.6250
ZI11_031 1.8750 1.1880 1.5000 0.3120 1.6250
ZI11_032 2.3750 1.1880 1.5000 0.3120 1.6250
ZI11_033 2.8750 1.1880 1.5000 0.3120 1.6250
ZI11_034 3.3750 1.1880 1.5000 0.3120 1.6250
ZI11_035 3.8750 1.1880 1.5000 0.3120 1.6250
ZI11_036 4.3750 1.1880 1.5000 0.3120 1.6250
ZI11_037 4.8750 1.1880 1.5000 0.3120 1.6250
ZI11_038 5.8750 1.1880 1.5000 0.3120 1.6250
ZI11_039 0.8750 1.2500 1.5000 0.3120 1.6250
ZI11_040 1.3750 1.2500 1.5000 0.3120 1.6250
ZI11_041 1.8750 1.2500 1.5000 0.3120 1.6250
ZI11_042 2.3750 1.2500 1.5000 0.3120 1.6250
ZI11_043 2.8750 1.2500 1.5000 0.3120 1.6250
ZI11_044 3.3750 1.2500 1.5000 0.3120 1.6250
ZI11_045 3.8750 1.2500 1.5000 0.3120 1.6250
ZI11_046 4.3750 1.2500 1.5000 0.3120 1.6250
ZI11_047 4.8750 1.2500 1.5000 0.3120 1.6250
InstanceName
S2 d_1 d_3 k d_4
HASCO BUSHINGS
15 - 8 Mold Base Library
ZI11_048 5.8750 1.2500 1.5000 0.3120 1.6250
ZI11_049 0.8750 1.4380 2.0000 0.3120 2.1250
ZI11_050 1.3750 1.4380 2.0000 0.3120 2.1250
ZI11_051 1.8750 1.4380 2.0000 0.3120 2.1250
ZI11_052 2.3750 1.4380 2.0000 0.3120 2.1250
ZI11_053 2.8750 1.4380 2.0000 0.3120 2.1250
ZI11_054 3.3750 1.4380 2.0000 0.3120 2.1250
ZI11_055 3.8750 1.4380 2.0000 0.3120 2.1250
ZI11_056 4.3750 1.4380 2.0000 0.3120 2.1250
ZI11_057 4.8750 1.4380 2.0000 0.3120 2.1250
ZI11_058 5.8750 1.4380 2.0000 0.3120 2.1250
ZI11_059 0.8750 1.5000 2.0000 0.3120 2.1250
ZI11_060 1.3750 1.5000 2.0000 0.3120 2.1250
ZI11_061 1.8750 1.5000 2.0000 0.3120 2.1250
ZI11_062 2.3750 1.5000 2.0000 0.3120 2.1250
ZI11_063 2.8750 1.5000 2.0000 0.3120 2.1250
ZI11_064 3.3750 1.5000 2.0000 0.3120 2.1250
ZI11_065 3.8750 1.5000 2.0000 0.3120 2.1250
ZI11_066 4.3750 1.5000 2.0000 0.3120 2.1250
ZI11_067 4.8750 1.5000 2.0000 0.3120 2.1250
ZI11_068 5.8750 1.5000 2.0000 0.3120 2.1250
ZI11_069 1.3750 2.0000 2.5000 0.5000 2.6250
ZI11_070 1.8750 2.0000 2.5000 0.5000 2.6250
ZI11_071 2.3750 2.0000 2.5000 0.5000 2.6250
ZI11_072 2.8750 2.0000 2.5000 0.5000 2.6250
ZI11_073 3.3750 2.0000 2.5000 0.5000 2.6250
ZI11_074 3.8750 2.0000 2.5000 0.5000 2.6250
ZI11_075 4.3750 2.0000 2.5000 0.5000 2.6250
ZI11_076 4.8750 2.0000 2.5000 0.5000 2.6250
ZI11_077 5.8750 2.0000 2.5000 0.5000 2.6250
InstanceName
S2 d_1 d_3 k d_4
HASCO BUSHINGS
Mold Base Library 15 - 9
BUSHING, CATALOG NO. ZI20
Generic Part Name: ZI20
InstanceName
d_3L
Lengthd_2 l1
ZI20_010 1.0000 1.5000 0.7800 0.5310
ZI20_011 1.0000 2.0000 0.7800 0.5310
ZI20_012 1.0000 3.0000 0.7800 0.5310
ZI20_013 1.0000 4.0000 0.7800 0.5310
ZI20_014 1.0000 4.5000 0.7800 0.5310
ZI20_015 1.0000 5.0000 0.7800 0.5310
ZI20_016 1.0000 5.5000 0.7800 0.5310
ZI20_017 1.0000 6.5000 0.7800 0.5310
ZI20_020 1.2500 1.5000 1.0400 0.5310
ZI20_021 1.2500 2.0000 1.0400 0.5310
ZI20_022 1.2500 3.0000 1.0400 0.5310
ZI20_023 1.2500 4.0000 1.0400 0.5310
ZI20_024 1.2500 4.5000 1.0400 0.5310
ZI20_025 1.2500 5.0000 1.0400 0.5310
ZI20_026 1.2500 5.5000 1.0400 0.5310
ZI20_027 1.2500 6.5000 1.0400 0.5310
ZI20_030 1.5000 2.0000 1.3000 0.5310
HASCO BUSHINGS
15 - 10 Mold Base Library
ZI20_031 1.5000 3.0000 1.3000 0.5310
ZI20_032 1.5000 4.0000 1.3000 0.5310
ZI20_033 1.5000 5.0000 1.3000 0.5310
ZI20_034 1.5000 5.5000 1.3000 0.5310
ZI20_035 1.5000 6.5000 1.3000 0.5310
ZI20_036 1.5000 7.5000 1.3000 0.5310
ZI20_040 2.0000 2.0000 1.5700 0.5310
ZI20_041 2.0000 3.0000 1.5700 0.5310
ZI20_042 2.0000 4.0000 1.5700 0.5310
ZI20_043 2.0000 5.0000 1.5700 0.5310
ZI20_044 2.0000 5.5000 1.5700 0.5310
ZI20_045 2.0000 6.5000 1.5700 0.5310
ZI20_046 2.0000 7.5000 1.5700 0.5310
InstanceName
d_3L
Lengthd_2 l1
Mold Base Library 16 - 1
13HASCO LOCATING RINGS
LOCATING RING, CATALOG NO. KI110
Generic Part Name: KI110
InstanceName
D H
KI110_010 4.0000 0.4380
KI110_011 4.0000 0.5310
HASCO LOCATING RINGS
16 - 2 Mold Base Library
LOCATING RING, CATALOG NO. KI113
Generic Part Name: KI113
InstanceName
D H
KI113_010 4.00 0.9690
Mold Base Library 17 - 1
13HASCO PINS
PIN, CATALOG NO. ZI00
Generic Part Name: ZI00
InstanceName
S2 d_1L
Lengthd_3 f k d_4
ZI00_010 0.8750 0.6880 1.2500 1.0000 0.2500 0.1880 1.1250
ZI00_011 0.8750 0.6880 1.7500 1.0000 0.2500 0.1880 1.1250
ZI00_012 0.8750 0.6880 2.7500 1.0000 0.2500 0.1880 1.1250
ZI00_013 0.8750 0.6880 3.7500 1.0000 0.2500 0.1880 1.1250
ZI00_014 0.8750 0.6880 4.7500 1.0000 0.2500 0.1880 1.1250
ZI00_015 1.3750 0.6880 1.7500 1.0000 0.2500 0.1880 1.1250
ZI00_016 1.3750 0.6880 2.7500 1.0000 0.2500 0.1880 1.1250
ZI00_017 1.3750 0.6880 3.7500 1.0000 0.2500 0.1880 1.1250
ZI00_018 1.3750 0.6880 4.7500 1.0000 0.2500 0.1880 1.1250
ZI00_019 1.8750 0.6880 1.7500 1.0000 0.2500 0.1880 1.1250
ZI00_020 1.8750 0.6880 2.7500 1.0000 0.2500 0.1880 1.1250
ZI00_021 1.8750 0.6880 3.7500 1.0000 0.2500 0.1880 1.1250
ZI00_022 1.8750 0.6880 4.7500 1.0000 0.2500 0.1880 1.1250
ZI00_023 2.3750 0.6880 1.7500 1.0000 0.2500 0.1880 1.1250
ZI00_024 2.3750 0.6880 2.7500 1.0000 0.2500 0.1880 1.1250
ZI00_025 2.3750 0.6880 3.7500 1.0000 0.2500 0.1880 1.1250
HASCO PINS
17 - 2 Mold Base Library
ZI00_026 2.3750 0.6880 4.7500 1.0000 0.2500 0.1880 1.1250
ZI00_027 2.8750 0.6880 1.7500 1.0000 0.2500 0.1880 1.1250
ZI00_028 2.8750 0.6880 2.7500 1.0000 0.2500 0.1880 1.1250
ZI00_029 2.8750 0.6880 3.7500 1.0000 0.2500 0.1880 1.1250
ZI00_030 2.8750 0.6880 4.7500 1.0000 0.2500 0.1880 1.1250
ZI00_031 3.3750 0.6880 1.7500 1.0000 0.2500 0.1880 1.1250
ZI00_032 3.3750 0.6880 2.7500 1.0000 0.2500 0.1880 1.1250
ZI00_033 3.3750 0.6880 3.7500 1.0000 0.2500 0.1880 1.1250
ZI00_034 3.3750 0.6880 4.7500 1.0000 0.2500 0.1880 1.1250
ZI00_035 3.8750 0.6880 1.7500 1.0000 0.2500 0.1880 1.1250
ZI00_036 3.8750 0.6880 2.7500 1.0000 0.2500 0.1880 1.1250
ZI00_037 3.8750 0.6880 3.7500 1.0000 0.2500 0.1880 1.1250
ZI00_038 3.8750 0.6880 4.7500 1.0000 0.2500 0.1880 1.1250
ZI00_039 4.3750 0.6880 1.7500 1.0000 0.2500 0.1880 1.1250
ZI00_040 4.3750 0.6880 2.7500 1.0000 0.2500 0.1880 1.1250
ZI00_041 4.3750 0.6880 3.7500 1.0000 0.2500 0.1880 1.1250
ZI00_042 4.3750 0.6880 4.7500 1.0000 0.2500 0.1880 1.1250
ZI00_050 0.8750 0.7500 1.2500 1.0000 0.2500 0.1880 1.1250
ZI00_051 0.8750 0.7500 1.7500 1.0000 0.2500 0.1880 1.1250
ZI00_052 0.8750 0.7500 2.7500 1.0000 0.2500 0.1880 1.1250
ZI00_053 0.8750 0.7500 3.7500 1.0000 0.2500 0.1880 1.1250
ZI00_054 0.8750 0.7500 4.7500 1.0000 0.2500 0.1880 1.1250
ZI00_055 1.3750 0.7500 1.7500 1.0000 0.2500 0.1880 1.1250
ZI00_056 1.3750 0.7500 2.7500 1.0000 0.2500 0.1880 1.1250
ZI00_057 1.3750 0.7500 3.7500 1.0000 0.2500 0.1880 1.1250
ZI00_058 1.3750 0.7500 4.7500 1.0000 0.2500 0.1880 1.1250
ZI00_059 1.8750 0.7500 1.7500 1.0000 0.2500 0.1880 1.1250
ZI00_060 1.8750 0.7500 2.7500 1.0000 0.2500 0.1880 1.1250
ZI00_061 1.8750 0.7500 3.7500 1.0000 0.2500 0.1880 1.1250
ZI00_062 1.8750 0.7500 4.7500 1.0000 0.2500 0.1880 1.1250
InstanceName
S2 d_1L
Lengthd_3 f k d_4
HASCO PINS
Mold Base Library 17 - 3
ZI00_063 2.3750 0.7500 1.7500 1.0000 0.2500 0.1880 1.1250
ZI00_064 2.3750 0.7500 2.7500 1.0000 0.2500 0.1880 1.1250
ZI00_065 2.3750 0.7500 3.7500 1.0000 0.2500 0.1880 1.1250
ZI00_066 2.3750 0.7500 4.7500 1.0000 0.2500 0.1880 1.1250
ZI00_067 2.8750 0.7500 1.7500 1.0000 0.2500 0.1880 1.1250
ZI00_068 2.8750 0.7500 2.7500 1.0000 0.2500 0.1880 1.1250
ZI00_069 2.8750 0.7500 3.7500 1.0000 0.2500 0.1880 1.1250
ZI00_070 2.8750 0.7500 4.7500 1.0000 0.2500 0.1880 1.1250
ZI00_071 3.3750 0.7500 1.7500 1.0000 0.2500 0.1880 1.1250
ZI00_072 3.3750 0.7500 2.7500 1.0000 0.2500 0.1880 1.1250
ZI00_073 3.3750 0.7500 3.7500 1.0000 0.2500 0.1880 1.1250
ZI00_074 3.3750 0.7500 4.7500 1.0000 0.2500 0.1880 1.1250
ZI00_075 3.8750 0.7500 1.7500 1.0000 0.2500 0.1880 1.1250
ZI00_076 3.8750 0.7500 2.7500 1.0000 0.2500 0.1880 1.1250
ZI00_077 3.8750 0.7500 3.7500 1.0000 0.2500 0.1880 1.1250
ZI00_078 3.8750 0.7500 4.7500 1.0000 0.2500 0.1880 1.1250
ZI00_079 4.3750 0.7500 1.7500 1.0000 0.2500 0.1880 1.1250
ZI00_080 4.3750 0.7500 2.7500 1.0000 0.2500 0.1880 1.1250
ZI00_081 4.3750 0.7500 3.7500 1.0000 0.2500 0.1880 1.1250
ZI00_082 4.3750 0.7500 4.7500 1.0000 0.2500 0.1880 1.1250
ZI00_083 0.8750 0.9380 1.2500 1.2500 0.2500 0.2500 1.3750
ZI00_084 0.8750 0.9380 1.7500 1.2500 0.2500 0.2500 1.3750
ZI00_085 0.8750 0.9380 2.2500 1.2500 0.2500 0.2500 1.3750
ZI00_086 0.8750 0.9380 3.2500 1.2500 0.2500 0.2500 1.3750
ZI00_087 0.8750 0.9380 4.2500 1.2500 0.2500 0.2500 1.3750
ZI00_088 0.8750 0.9380 5.2500 1.2500 0.2500 0.2500 1.3750
ZI00_089 0.8750 0.9380 6.2500 1.2500 0.2500 0.2500 1.3750
ZI00_090 1.3750 0.9380 1.2500 1.2500 0.2500 0.2500 1.3750
ZI00_091 1.3750 0.9380 1.7500 1.2500 0.2500 0.2500 1.3750
ZI00_092 1.3750 0.9380 2.7500 1.2500 0.2500 0.2500 1.3750
InstanceName
S2 d_1L
Lengthd_3 f k d_4
HASCO PINS
17 - 4 Mold Base Library
ZI00_093 1.3750 0.9380 3.7500 1.2500 0.2500 0.2500 1.3750
ZI00_094 1.3750 0.9380 4.7500 1.2500 0.2500 0.2500 1.3750
ZI00_095 1.3750 0.9380 5.7500 1.2500 0.2500 0.2500 1.3750
ZI00_096 1.3750 0.9380 6.7500 1.2500 0.2500 0.2500 1.3750
ZI00_097 1.3750 0.9380 8.7500 1.2500 0.2500 0.2500 1.3750
ZI00_098 1.8750 0.9380 1.7500 1.2500 0.2500 0.2500 1.3750
ZI00_099 1.8750 0.9380 2.2500 1.2500 0.2500 0.2500 1.3750
ZI00_100 1.8750 0.9380 3.2500 1.2500 0.2500 0.2500 1.3750
ZI00_101 1.8750 0.9380 4.2500 1.2500 0.2500 0.2500 1.3750
ZI00_102 1.8750 0.9380 5.2500 1.2500 0.2500 0.2500 1.3750
ZI00_103 1.8750 0.9380 6.2500 1.2500 0.2500 0.2500 1.3750
ZI00_104 2.3750 0.9380 1.7500 1.2500 0.2500 0.2500 1.3750
ZI00_105 2.3750 0.9380 2.2500 1.2500 0.2500 0.2500 1.3750
ZI00_106 2.3750 0.9380 3.2500 1.2500 0.2500 0.2500 1.3750
ZI00_107 2.3750 0.9380 4.2500 1.2500 0.2500 0.2500 1.3750
ZI00_108 2.3750 0.9380 5.2500 1.2500 0.2500 0.2500 1.3750
ZI00_109 2.3750 0.9380 6.2500 1.2500 0.2500 0.2500 1.3750
ZI00_110 2.8750 0.9380 1.7500 1.2500 0.2500 0.2500 1.3750
ZI00_111 2.8750 0.9380 2.2500 1.2500 0.2500 0.2500 1.3750
ZI00_112 2.8750 0.9380 3.2500 1.2500 0.2500 0.2500 1.3750
ZI00_113 2.8750 0.9380 4.2500 1.2500 0.2500 0.2500 1.3750
ZI00_114 2.8750 0.9380 5.2500 1.2500 0.2500 0.2500 1.3750
ZI00_115 2.8750 0.9380 6.2500 1.2500 0.2500 0.2500 1.3750
ZI00_116 3.3750 0.9380 1.7500 1.2500 0.2500 0.2500 1.3750
ZI00_117 3.3750 0.9380 2.2500 1.2500 0.2500 0.2500 1.3750
ZI00_118 3.3750 0.9380 3.2500 1.2500 0.2500 0.2500 1.3750
ZI00_119 3.3750 0.9380 4.2500 1.2500 0.2500 0.2500 1.3750
ZI00_120 3.3750 0.9380 5.2500 1.2500 0.2500 0.2500 1.3750
ZI00_121 3.3750 0.9380 6.2500 1.2500 0.2500 0.2500 1.3750
ZI00_122 3.8750 0.9380 2.2500 1.2500 0.2500 0.2500 1.3750
InstanceName
S2 d_1L
Lengthd_3 f k d_4
HASCO PINS
Mold Base Library 17 - 5
ZI00_123 3.8750 0.9380 3.2500 1.2500 0.2500 0.2500 1.3750
ZI00_124 3.8750 0.9380 4.2500 1.2500 0.2500 0.2500 1.3750
ZI00_125 3.8750 0.9380 5.2500 1.2500 0.2500 0.2500 1.3750
ZI00_126 3.8750 0.9380 6.2500 1.2500 0.2500 0.2500 1.3750
ZI00_127 4.3750 0.9380 1.7500 1.2500 0.2500 0.2500 1.3750
ZI00_128 4.3750 0.9380 2.2500 1.2500 0.2500 0.2500 1.3750
ZI00_129 4.3750 0.9380 3.2500 1.2500 0.2500 0.2500 1.3750
ZI00_130 4.3750 0.9380 4.2500 1.2500 0.2500 0.2500 1.3750
ZI00_131 4.3750 0.9380 5.2500 1.2500 0.2500 0.2500 1.3750
ZI00_132 4.3750 0.9380 6.2500 1.2500 0.2500 0.2500 1.3750
ZI00_133 4.8750 0.9380 1.7500 1.2500 0.2500 0.2500 1.3750
ZI00_134 4.8750 0.9380 2.2500 1.2500 0.2500 0.2500 1.3750
ZI00_135 4.8750 0.9380 3.2500 1.2500 0.2500 0.2500 1.3750
ZI00_136 4.8750 0.9380 4.2500 1.2500 0.2500 0.2500 1.3750
ZI00_137 4.8750 0.9380 5.2500 1.2500 0.2500 0.2500 1.3750
ZI00_138 4.8750 0.9380 6.2500 1.2500 0.2500 0.2500 1.3750
ZI00_139 5.8750 0.9380 1.7500 1.2500 0.2500 0.2500 1.3750
ZI00_140 5.8750 0.9380 2.2500 1.2500 0.2500 0.2500 1.3750
ZI00_141 5.8750 0.9380 3.2500 1.2500 0.2500 0.2500 1.3750
ZI00_142 5.8750 0.9380 4.2500 1.2500 0.2500 0.2500 1.3750
ZI00_143 5.8750 0.9380 5.2500 1.2500 0.2500 0.2500 1.3750
ZI00_144 5.8750 0.9380 6.2500 1.2500 0.2500 0.2500 1.3750
ZI00_145 0.8750 1.0000 1.2500 1.2500 0.2500 0.2500 1.3750
ZI00_146 0.8750 1.0000 1.7500 1.2500 0.2500 0.2500 1.3750
ZI00_147 0.8750 1.0000 2.2500 1.2500 0.2500 0.2500 1.3750
ZI00_148 0.8750 1.0000 3.2500 1.2500 0.2500 0.2500 1.3750
ZI00_149 0.8750 1.0000 4.2500 1.2500 0.2500 0.2500 1.3750
ZI00_150 0.8750 1.0000 5.2500 1.2500 0.2500 0.2500 1.3750
ZI00_151 0.8750 1.0000 6.2500 1.2500 0.2500 0.2500 1.3750
ZI00_152 1.3750 1.0000 1.2500 1.2500 0.2500 0.2500 1.3750
InstanceName
S2 d_1L
Lengthd_3 f k d_4
HASCO PINS
17 - 6 Mold Base Library
ZI00_153 1.3750 1.0000 1.7500 1.2500 0.2500 0.2500 1.3750
ZI00_154 1.3750 1.0000 2.7500 1.2500 0.2500 0.2500 1.3750
ZI00_155 1.3750 1.0000 3.7500 1.2500 0.2500 0.2500 1.3750
ZI00_156 1.3750 1.0000 4.7500 1.2500 0.2500 0.2500 1.3750
ZI00_157 1.3750 1.0000 5.7500 1.2500 0.2500 0.2500 1.3750
ZI00_158 1.3750 1.0000 6.7500 1.2500 0.2500 0.2500 1.3750
ZI00_159 1.3750 1.0000 8.7500 1.2500 0.2500 0.2500 1.3750
ZI00_160 1.8750 1.0000 1.7500 1.2500 0.2500 0.2500 1.3750
ZI00_161 1.8750 1.0000 2.2500 1.2500 0.2500 0.2500 1.3750
ZI00_162 1.8750 1.0000 3.2500 1.2500 0.2500 0.2500 1.3750
ZI00_163 1.8750 1.0000 4.2500 1.2500 0.2500 0.2500 1.3750
ZI00_164 1.8750 1.0000 5.2500 1.2500 0.2500 0.2500 1.3750
ZI00_165 1.8750 1.0000 6.2500 1.2500 0.2500 0.2500 1.3750
ZI00_166 2.3750 1.0000 1.7500 1.2500 0.2500 0.2500 1.3750
ZI00_167 2.3750 1.0000 2.2500 1.2500 0.2500 0.2500 1.3750
ZI00_168 2.3750 1.0000 3.2500 1.2500 0.2500 0.2500 1.3750
ZI00_169 2.3750 1.0000 4.2500 1.2500 0.2500 0.2500 1.3750
ZI00_170 2.3750 1.0000 5.2500 1.2500 0.2500 0.2500 1.3750
ZI00_171 2.3750 1.0000 6.2500 1.2500 0.2500 0.2500 1.3750
ZI00_172 2.8750 1.0000 1.7500 1.2500 0.2500 0.2500 1.3750
ZI00_173 2.8750 1.0000 2.2500 1.2500 0.2500 0.2500 1.3750
ZI00_174 2.8750 1.0000 3.2500 1.2500 0.2500 0.2500 1.3750
ZI00_175 2.8750 1.0000 4.2500 1.2500 0.2500 0.2500 1.3750
ZI00_176 2.8750 1.0000 5.2500 1.2500 0.2500 0.2500 1.3750
ZI00_177 2.8750 1.0000 6.2500 1.2500 0.2500 0.2500 1.3750
ZI00_178 3.3750 1.0000 1.7500 1.2500 0.2500 0.2500 1.3750
ZI00_179 3.3750 1.0000 2.2500 1.2500 0.2500 0.2500 1.3750
ZI00_180 3.3750 1.0000 3.2500 1.2500 0.2500 0.2500 1.3750
ZI00_181 3.3750 1.0000 4.2500 1.2500 0.2500 0.2500 1.3750
ZI00_182 3.3750 1.0000 5.2500 1.2500 0.2500 0.2500 1.3750
InstanceName
S2 d_1L
Lengthd_3 f k d_4
HASCO PINS
Mold Base Library 17 - 7
ZI00_183 3.3750 1.0000 6.2500 1.2500 0.2500 0.2500 1.3750
ZI00_184 3.8750 1.0000 2.2500 1.2500 0.2500 0.2500 1.3750
ZI00_185 3.8750 1.0000 3.2500 1.2500 0.2500 0.2500 1.3750
ZI00_186 3.8750 1.0000 4.2500 1.2500 0.2500 0.2500 1.3750
ZI00_187 3.8750 1.0000 5.2500 1.2500 0.2500 0.2500 1.3750
ZI00_188 3.8750 1.0000 6.2500 1.2500 0.2500 0.2500 1.3750
ZI00_189 4.3750 1.0000 1.7500 1.2500 0.2500 0.2500 1.3750
ZI00_190 4.3750 1.0000 2.2500 1.2500 0.2500 0.2500 1.3750
ZI00_191 4.3750 1.0000 3.2500 1.2500 0.2500 0.2500 1.3750
ZI00_192 4.3750 1.0000 4.2500 1.2500 0.2500 0.2500 1.3750
ZI00_193 4.3750 1.0000 5.2500 1.2500 0.2500 0.2500 1.3750
ZI00_194 4.3750 1.0000 6.2500 1.2500 0.2500 0.2500 1.3750
ZI00_195 4.8750 1.0000 1.7500 1.2500 0.2500 0.2500 1.3750
ZI00_196 4.8750 1.0000 2.2500 1.2500 0.2500 0.2500 1.3750
ZI00_197 4.8750 1.0000 3.2500 1.2500 0.2500 0.2500 1.3750
ZI00_198 4.8750 1.0000 4.2500 1.2500 0.2500 0.2500 1.3750
ZI00_199 4.8750 1.0000 5.2500 1.2500 0.2500 0.2500 1.3750
ZI00_200 4.8750 1.0000 6.2500 1.2500 0.2500 0.2500 1.3750
ZI00_201 5.8750 1.0000 1.7500 1.2500 0.2500 0.2500 1.3750
ZI00_202 5.8750 1.0000 2.2500 1.2500 0.2500 0.2500 1.3750
ZI00_203 5.8750 1.0000 3.2500 1.2500 0.2500 0.2500 1.3750
ZI00_204 5.8750 1.0000 4.2500 1.2500 0.2500 0.2500 1.3750
ZI00_205 5.8750 1.0000 5.2500 1.2500 0.2500 0.2500 1.3750
ZI00_206 5.8750 1.0000 6.2500 1.2500 0.2500 0.2500 1.3750
ZI00_207 1.3750 1.1880 1.7500 1.5000 0.3750 0.3120 1.6250
ZI00_208 1.3750 1.1880 2.7500 1.5000 0.3750 0.3120 1.6250
ZI00_209 1.3750 1.1880 3.7500 1.5000 0.3750 0.3120 1.6250
ZI00_210 1.3750 1.1880 4.7500 1.5000 0.3750 0.3120 1.6250
ZI00_211 1.3750 1.1880 5.7500 1.5000 0.3750 0.3120 1.6250
ZI00_212 1.3750 1.1880 6.7500 1.5000 0.3750 0.3120 1.6250
InstanceName
S2 d_1L
Lengthd_3 f k d_4
HASCO PINS
17 - 8 Mold Base Library
ZI00_213 1.8750 1.1880 1.7500 1.5000 0.3750 0.3120 1.6250
ZI00_214 1.8750 1.1880 2.2500 1.5000 0.3750 0.3120 1.6250
ZI00_215 1.8750 1.1880 3.2500 1.5000 0.3750 0.3120 1.6250
ZI00_216 1.8750 1.1880 4.2500 1.5000 0.3750 0.3120 1.6250
ZI00_217 1.8750 1.1880 5.2500 1.5000 0.3750 0.3120 1.6250
ZI00_218 1.8750 1.1880 6.2500 1.5000 0.3750 0.3120 1.6250
ZI00_219 1.8750 1.1880 6.7500 1.5000 0.3750 0.3120 1.6250
ZI00_220 1.8750 1.1880 7.7500 1.5000 0.3750 0.3120 1.6250
ZI00_221 1.8750 1.1880 8.7500 1.5000 0.3750 0.3120 1.6250
ZI00_222 2.3750 1.1880 1.7500 1.5000 0.3750 0.3120 1.6250
ZI00_223 2.3750 1.1880 2.2500 1.5000 0.3750 0.3120 1.6250
ZI00_224 2.3750 1.1880 3.2500 1.5000 0.3750 0.3120 1.6250
ZI00_225 2.3750 1.1880 4.2500 1.5000 0.3750 0.3120 1.6250
ZI00_226 2.3750 1.1880 5.2500 1.5000 0.3750 0.3120 1.6250
ZI00_227 2.3750 1.1880 6.2500 1.5000 0.3750 0.3120 1.6250
ZI00_228 2.8750 1.1880 1.7500 1.5000 0.3750 0.3120 1.6250
ZI00_229 2.8750 1.1880 2.2500 1.5000 0.3750 0.3120 1.6250
ZI00_230 2.8750 1.1880 3.2500 1.5000 0.3750 0.3120 1.6250
ZI00_231 2.8750 1.1880 4.2500 1.5000 0.3750 0.3120 1.6250
ZI00_232 2.8750 1.1880 5.2500 1.5000 0.3750 0.3120 1.6250
ZI00_233 2.8750 1.1880 6.2500 1.5000 0.3750 0.3120 1.6250
ZI00_234 3.3750 1.1880 1.7500 1.5000 0.3750 0.3120 1.6250
ZI00_235 3.3750 1.1880 2.2500 1.5000 0.3750 0.3120 1.6250
ZI00_236 3.3750 1.1880 3.2500 1.5000 0.3750 0.3120 1.6250
ZI00_237 3.3750 1.1880 4.2500 1.5000 0.3750 0.3120 1.6250
ZI00_238 3.3750 1.1880 5.2500 1.5000 0.3750 0.3120 1.6250
ZI00_239 3.3750 1.1880 6.2500 1.5000 0.3750 0.3120 1.6250
ZI00_240 3.8750 1.1880 2.2500 1.5000 0.3750 0.3120 1.6250
ZI00_241 3.8750 1.1880 3.2500 1.5000 0.3750 0.3120 1.6250
ZI00_242 3.8750 1.1880 4.2500 1.5000 0.3750 0.3120 1.6250
InstanceName
S2 d_1L
Lengthd_3 f k d_4
HASCO PINS
Mold Base Library 17 - 9
ZI00_243 3.8750 1.1880 5.2500 1.5000 0.3750 0.3120 1.6250
ZI00_244 3.8750 1.1880 6.2500 1.5000 0.3750 0.3120 1.6250
ZI00_245 4.3750 1.1880 3.2500 1.5000 0.3750 0.3120 1.6250
ZI00_246 4.3750 1.1880 4.2500 1.5000 0.3750 0.3120 1.6250
ZI00_247 4.3750 1.1880 5.2500 1.5000 0.3750 0.3120 1.6250
ZI00_248 4.3750 1.1880 6.2500 1.5000 0.3750 0.3120 1.6250
ZI00_249 4.8750 1.1880 3.2500 1.5000 0.3750 0.3120 1.6250
ZI00_250 4.8750 1.1880 4.2500 1.5000 0.3750 0.3120 1.6250
ZI00_251 4.8750 1.1880 5.2500 1.5000 0.3750 0.3120 1.6250
ZI00_252 4.8750 1.1880 6.2500 1.5000 0.3750 0.3120 1.6250
ZI00_253 5.8750 1.1880 3.2500 1.5000 0.3750 0.3120 1.6250
ZI00_254 5.8750 1.1880 4.2500 1.5000 0.3750 0.3120 1.6250
ZI00_255 5.8750 1.1880 5.2500 1.5000 0.3750 0.3120 1.6250
ZI00_256 5.8750 1.1880 6.2500 1.5000 0.3750 0.3120 1.6250
ZI00_257 1.3750 1.2500 1.7500 1.5000 0.3750 0.3120 1.6250
ZI00_258 1.3750 1.2500 2.7500 1.5000 0.3750 0.3120 1.6250
ZI00_259 1.3750 1.2500 3.7500 1.5000 0.3750 0.3120 1.6250
ZI00_260 1.3750 1.2500 4.7500 1.5000 0.3750 0.3120 1.6250
ZI00_261 1.3750 1.2500 5.7500 1.5000 0.3750 0.3120 1.6250
ZI00_262 1.3750 1.2500 6.7500 1.5000 0.3750 0.3120 1.6250
ZI00_263 1.8750 1.2500 1.7500 1.5000 0.3750 0.3120 1.6250
ZI00_264 1.8750 1.2500 2.2500 1.5000 0.3750 0.3120 1.6250
ZI00_265 1.8750 1.2500 3.2500 1.5000 0.3750 0.3120 1.6250
ZI00_266 1.8750 1.2500 4.2500 1.5000 0.3750 0.3120 1.6250
ZI00_267 1.8750 1.2500 5.2500 1.5000 0.3750 0.3120 1.6250
ZI00_268 1.8750 1.2500 6.2500 1.5000 0.3750 0.3120 1.6250
ZI00_269 1.8750 1.2500 6.7500 1.5000 0.3750 0.3120 1.6250
ZI00_270 1.8750 1.2500 7.7500 1.5000 0.3750 0.3120 1.6250
ZI00_271 1.8750 1.2500 8.7500 1.5000 0.3750 0.3120 1.6250
ZI00_272 2.3750 1.2500 1.7500 1.5000 0.3750 0.3120 1.6250
InstanceName
S2 d_1L
Lengthd_3 f k d_4
HASCO PINS
17 - 10 Mold Base Library
ZI00_273 2.3750 1.2500 2.2500 1.5000 0.3750 0.3120 1.6250
ZI00_274 2.3750 1.2500 3.2500 1.5000 0.3750 0.3120 1.6250
ZI00_275 2.3750 1.2500 4.2500 1.5000 0.3750 0.3120 1.6250
ZI00_276 2.3750 1.2500 5.2500 1.5000 0.3750 0.3120 1.6250
ZI00_277 2.3750 1.2500 6.2500 1.5000 0.3750 0.3120 1.6250
ZI00_278 2.8750 1.2500 1.7500 1.5000 0.3750 0.3120 1.6250
ZI00_279 2.8750 1.2500 2.2500 1.5000 0.3750 0.3120 1.6250
ZI00_280 2.8750 1.2500 3.2500 1.5000 0.3750 0.3120 1.6250
ZI00_281 2.8750 1.2500 4.2500 1.5000 0.3750 0.3120 1.6250
ZI00_282 2.8750 1.2500 5.2500 1.5000 0.3750 0.3120 1.6250
ZI00_283 2.8750 1.2500 6.2500 1.5000 0.3750 0.3120 1.6250
ZI00_284 3.3750 1.2500 1.7500 1.5000 0.3750 0.3120 1.6250
ZI00_285 3.3750 1.2500 2.2500 1.5000 0.3750 0.3120 1.6250
ZI00_286 3.3750 1.2500 3.2500 1.5000 0.3750 0.3120 1.6250
ZI00_287 3.3750 1.2500 4.2500 1.5000 0.3750 0.3120 1.6250
ZI00_288 3.3750 1.2500 5.2500 1.5000 0.3750 0.3120 1.6250
ZI00_289 3.3750 1.2500 6.2500 1.5000 0.3750 0.3120 1.6250
ZI00_290 3.8750 1.2500 2.2500 1.5000 0.3750 0.3120 1.6250
ZI00_291 3.8750 1.2500 3.2500 1.5000 0.3750 0.3120 1.6250
ZI00_292 3.8750 1.2500 4.2500 1.5000 0.3750 0.3120 1.6250
ZI00_293 3.8750 1.2500 5.2500 1.5000 0.3750 0.3120 1.6250
ZI00_294 3.8750 1.2500 6.2500 1.5000 0.3750 0.3120 1.6250
ZI00_295 4.3750 1.2500 3.2500 1.5000 0.3750 0.3120 1.6250
ZI00_296 4.3750 1.2500 4.2500 1.5000 0.3750 0.3120 1.6250
ZI00_297 4.3750 1.2500 5.2500 1.5000 0.3750 0.3120 1.6250
ZI00_298 4.3750 1.2500 6.2500 1.5000 0.3750 0.3120 1.6250
ZI00_299 4.8750 1.2500 3.2500 1.5000 0.3750 0.3120 1.6250
ZI00_300 4.8750 1.2500 4.2500 1.5000 0.3750 0.3120 1.6250
ZI00_301 4.8750 1.2500 5.2500 1.5000 0.3750 0.3120 1.6250
ZI00_302 4.8750 1.2500 6.2500 1.5000 0.3750 0.3120 1.6250
InstanceName
S2 d_1L
Lengthd_3 f k d_4
HASCO PINS
Mold Base Library 17 - 11
ZI00_303 5.8750 1.2500 3.2500 1.5000 0.3750 0.3120 1.6250
ZI00_304 5.8750 1.2500 4.2500 1.5000 0.3750 0.3120 1.6250
ZI00_305 5.8750 1.2500 5.2500 1.5000 0.3750 0.3120 1.6250
ZI00_306 5.8750 1.2500 6.2500 1.5000 0.3750 0.3120 1.6250
ZI00_307 1.3750 1.4380 1.7500 2.0000 0.5000 0.3120 2.1250
ZI00_308 1.3750 1.4380 2.7500 2.0000 0.5000 0.3120 2.1250
ZI00_309 1.3750 1.4380 3.7500 2.0000 0.5000 0.3120 2.1250
ZI00_310 1.3750 1.4380 4.7500 2.0000 0.5000 0.3120 2.1250
ZI00_311 1.3750 1.4380 5.7500 2.0000 0.5000 0.3120 2.1250
ZI00_312 1.3750 1.4380 6.7500 2.0000 0.5000 0.3120 2.1250
ZI00_313 1.8750 1.4380 2.2500 2.0000 0.5000 0.3120 2.1250
ZI00_314 1.8750 1.4380 3.2500 2.0000 0.5000 0.3120 2.1250
ZI00_315 1.8750 1.4380 4.2500 2.0000 0.5000 0.3120 2.1250
ZI00_316 1.8750 1.4380 5.2500 2.0000 0.5000 0.3120 2.1250
ZI00_317 1.8750 1.4380 6.2500 2.0000 0.5000 0.3120 2.1250
ZI00_318 1.8750 1.4380 7.2500 2.0000 0.5000 0.3120 2.1250
ZI00_319 1.8750 1.4380 8.2500 2.0000 0.5000 0.3120 2.1250
ZI00_320 1.8750 1.4380 9.2500 2.0000 0.5000 0.3120 2.1250
ZI00_321 1.8750 1.4380 10.2500 2.0000 0.5000 0.3120 2.1250
ZI00_322 2.3750 1.4380 2.2500 2.0000 0.5000 0.3120 2.1250
ZI00_323 2.3750 1.4380 3.2500 2.0000 0.5000 0.3120 2.1250
ZI00_324 2.3750 1.4380 4.2500 2.0000 0.5000 0.3120 2.1250
ZI00_325 2.3750 1.4380 5.2500 2.0000 0.5000 0.3120 2.1250
ZI00_326 2.3750 1.4380 6.2500 2.0000 0.5000 0.3120 2.1250
ZI00_327 2.3750 1.4380 7.2500 2.0000 0.5000 0.3120 2.1250
ZI00_328 2.3750 1.4380 8.2500 2.0000 0.5000 0.3120 2.1250
ZI00_329 2.3750 1.4380 9.2500 2.0000 0.5000 0.3120 2.1250
ZI00_330 2.3750 1.4380 10.2500 2.0000 0.5000 0.3120 2.1250
ZI00_331 2.8750 1.4380 2.2500 2.0000 0.5000 0.3120 2.1250
ZI00_332 2.8750 1.4380 3.2500 2.0000 0.5000 0.3120 2.1250
InstanceName
S2 d_1L
Lengthd_3 f k d_4
HASCO PINS
17 - 12 Mold Base Library
ZI00_333 2.8750 1.4380 4.2500 2.0000 0.5000 0.3120 2.1250
ZI00_334 2.8750 1.4380 5.2500 2.0000 0.5000 0.3120 2.1250
ZI00_335 2.8750 1.4380 6.2500 2.0000 0.5000 0.3120 2.1250
ZI00_336 3.3750 1.4380 3.2500 2.0000 0.5000 0.3120 2.1250
ZI00_337 3.3750 1.4380 4.2500 2.0000 0.5000 0.3120 2.1250
ZI00_338 3.3750 1.4380 5.2500 2.0000 0.5000 0.3120 2.1250
ZI00_339 3.3750 1.4380 6.2500 2.0000 0.5000 0.3120 2.1250
ZI00_340 3.8750 1.4380 3.2500 2.0000 0.5000 0.3120 2.1250
ZI00_341 3.8750 1.4380 4.2500 2.0000 0.5000 0.3120 2.1250
ZI00_342 3.8750 1.4380 5.2500 2.0000 0.5000 0.3120 2.1250
ZI00_343 3.8750 1.4380 5.7500 2.0000 0.5000 0.3120 2.1250
ZI00_344 3.8750 1.4380 6.2500 2.0000 0.5000 0.3120 2.1250
ZI00_345 4.3750 1.4380 3.2500 2.0000 0.5000 0.3120 2.1250
ZI00_346 4.3750 1.4380 4.2500 2.0000 0.5000 0.3120 2.1250
ZI00_347 4.3750 1.4380 5.2500 2.0000 0.5000 0.3120 2.1250
ZI00_348 4.3750 1.4380 6.2500 2.0000 0.5000 0.3120 2.1250
ZI00_349 4.8750 1.4380 3.2500 2.0000 0.5000 0.3120 2.1250
ZI00_350 4.8750 1.4380 4.2500 2.0000 0.5000 0.3120 2.1250
ZI00_351 4.8750 1.4380 5.2500 2.0000 0.5000 0.3120 2.1250
ZI00_352 4.8750 1.4380 6.2500 2.0000 0.5000 0.3120 2.1250
ZI00_353 5.8750 1.4380 3.2500 2.0000 0.5000 0.3120 2.1250
ZI00_354 5.8750 1.4380 4.2500 2.0000 0.5000 0.3120 2.1250
ZI00_355 5.8750 1.4380 5.2500 2.0000 0.5000 0.3120 2.1250
ZI00_356 5.8750 1.4380 6.2500 2.0000 0.5000 0.3120 2.1250
ZI00_357 1.3750 1.5000 1.7500 2.0000 0.5000 0.3120 2.1250
ZI00_358 1.3750 1.5000 2.7500 2.0000 0.5000 0.3120 2.1250
ZI00_359 1.3750 1.5000 3.7500 2.0000 0.5000 0.3120 2.1250
ZI00_360 1.3750 1.5000 4.7500 2.0000 0.5000 0.3120 2.1250
ZI00_361 1.3750 1.5000 5.7500 2.0000 0.5000 0.3120 2.1250
ZI00_362 1.3750 1.5000 6.7500 2.0000 0.5000 0.3120 2.1250
InstanceName
S2 d_1L
Lengthd_3 f k d_4
HASCO PINS
Mold Base Library 17 - 13
ZI00_363 1.8750 1.5000 2.2500 2.0000 0.5000 0.3120 2.1250
ZI00_364 1.8750 1.5000 3.2500 2.0000 0.5000 0.3120 2.1250
ZI00_365 1.8750 1.5000 4.2500 2.0000 0.5000 0.3120 2.1250
ZI00_366 1.8750 1.5000 5.2500 2.0000 0.5000 0.3120 2.1250
ZI00_367 1.8750 1.5000 6.2500 2.0000 0.5000 0.3120 2.1250
ZI00_368 1.8750 1.5000 7.2500 2.0000 0.5000 0.3120 2.1250
ZI00_369 1.8750 1.5000 8.2500 2.0000 0.5000 0.3120 2.1250
ZI00_370 1.8750 1.5000 9.2500 2.0000 0.5000 0.3120 2.1250
ZI00_371 1.8750 1.5000 10.2500 2.0000 0.5000 0.3120 2.1250
ZI00_372 2.3750 1.5000 2.2500 2.0000 0.5000 0.3120 2.1250
ZI00_373 2.3750 1.5000 3.2500 2.0000 0.5000 0.3120 2.1250
ZI00_374 2.3750 1.5000 4.2500 2.0000 0.5000 0.3120 2.1250
ZI00_375 2.3750 1.5000 5.2500 2.0000 0.5000 0.3120 2.1250
ZI00_376 2.3750 1.5000 6.2500 2.0000 0.5000 0.3120 2.1250
ZI00_377 2.3750 1.5000 7.2500 2.0000 0.5000 0.3120 2.1250
ZI00_378 2.3750 1.5000 8.2500 2.0000 0.5000 0.3120 2.1250
ZI00_379 2.3750 1.5000 9.2500 2.0000 0.5000 0.3120 2.1250
ZI00_380 2.3750 1.5000 10.2500 2.0000 0.5000 0.3120 2.1250
ZI00_381 2.8750 1.5000 2.2500 2.0000 0.5000 0.3120 2.1250
ZI00_382 2.8750 1.5000 3.2500 2.0000 0.5000 0.3120 2.1250
ZI00_383 2.8750 1.5000 4.2500 2.0000 0.5000 0.3120 2.1250
ZI00_384 2.8750 1.5000 5.2500 2.0000 0.5000 0.3120 2.1250
ZI00_385 2.8750 1.5000 6.2500 2.0000 0.5000 0.3120 2.1250
ZI00_386 3.3750 1.5000 3.2500 2.0000 0.5000 0.3120 2.1250
ZI00_387 3.3750 1.5000 4.2500 2.0000 0.5000 0.3120 2.1250
ZI00_388 3.3750 1.5000 5.2500 2.0000 0.5000 0.3120 2.1250
ZI00_389 3.3750 1.5000 6.2500 2.0000 0.5000 0.3120 2.1250
ZI00_390 3.8750 1.5000 3.2500 2.0000 0.5000 0.3120 2.1250
ZI00_391 3.8750 1.5000 4.2500 2.0000 0.5000 0.3120 2.1250
ZI00_392 3.8750 1.5000 5.2500 2.0000 0.5000 0.3120 2.1250
InstanceName
S2 d_1L
Lengthd_3 f k d_4
HASCO PINS
17 - 14 Mold Base Library
ZI00_393 3.8750 1.5000 5.7500 2.0000 0.5000 0.3120 2.1250
ZI00_394 3.8750 1.5000 6.2500 2.0000 0.5000 0.3120 2.1250
ZI00_395 4.3750 1.5000 3.2500 2.0000 0.5000 0.3120 2.1250
ZI00_396 4.3750 1.5000 4.2500 2.0000 0.5000 0.3120 2.1250
ZI00_397 4.3750 1.5000 5.2500 2.0000 0.5000 0.3120 2.1250
ZI00_398 4.3750 1.5000 6.2500 2.0000 0.5000 0.3120 2.1250
ZI00_399 4.8750 1.5000 3.2500 2.0000 0.5000 0.3120 2.1250
ZI00_400 4.8750 1.5000 4.2500 2.0000 0.5000 0.3120 2.1250
ZI00_401 4.8750 1.5000 5.2500 2.0000 0.5000 0.3120 2.1250
ZI00_402 4.8750 1.5000 6.2500 2.0000 0.5000 0.3120 2.1250
ZI00_403 5.8750 1.5000 3.2500 2.0000 0.5000 0.3120 2.1250
ZI00_404 5.8750 1.5000 4.2500 2.0000 0.5000 0.3120 2.1250
ZI00_405 5.8750 1.5000 5.2500 2.0000 0.5000 0.3120 2.1250
ZI00_406 5.8750 1.5000 6.2500 2.0000 0.5000 0.3120 2.1250
InstanceName
S2 d_1L
Lengthd_3 f k d_4
HASCO PINS
Mold Base Library 17 - 15
PIN, CATALOG NO. ZI03
Generic Part Name: ZI03
InstanceName
s2 d_1 L k d_3 d_4
ZI03_010 0.8750 0.6880 1.2500 0.1880 1.0000 1.1250
ZI03_011 0.8750 0.6880 1.7500 0.1880 1.0000 1.1250
ZI03_012 0.8750 0.6880 2.7500 0.1880 1.0000 1.1250
ZI03_013 0.8750 0.6880 3.7500 0.1880 1.0000 1.1250
ZI03_014 0.8750 0.6880 4.7500 0.1880 1.0000 1.1250
ZI03_015 1.3750 0.6880 1.7500 0.1880 1.0000 1.1250
ZI03_016 1.3750 0.6880 2.7500 0.1880 1.0000 1.1250
ZI03_017 1.3750 0.6880 3.7500 0.1880 1.0000 1.1250
ZI03_018 1.3750 0.6880 4.7500 0.1880 1.0000 1.1250
ZI03_019 1.3750 0.6880 5.7500 0.1880 1.0000 1.1250
ZI03_020 1.3750 0.6880 6.7500 0.1880 1.0000 1.1250
ZI03_021 1.3750 0.6880 7.7500 0.1880 1.0000 1.1250
ZI03_022 1.3750 0.6880 8.7500 0.1880 1.0000 1.1250
ZI03_023 1.3750 0.6880 9.7500 0.1880 1.0000 1.1250
ZI03_024 1.8750 0.6880 1.7500 0.1880 1.0000 1.1250
ZI03_025 1.8750 0.6880 2.7500 0.1880 1.0000 1.1250
ZI03_026 1.8750 0.6880 3.7500 0.1880 1.0000 1.1250
HASCO PINS
17 - 16 Mold Base Library
ZI03_027 1.8750 0.6880 4.7500 0.1880 1.0000 1.1250
ZI03_028 2.3750 0.6880 1.7500 0.1880 1.0000 1.1250
ZI03_029 2.3750 0.6880 2.7500 0.1880 1.0000 1.1250
ZI03_030 2.3750 0.6880 3.7500 0.1880 1.0000 1.1250
ZI03_031 2.3750 0.6880 4.7500 0.1880 1.0000 1.1250
ZI03_032 2.8750 0.6880 1.7500 0.1880 1.0000 1.1250
ZI03_033 2.8750 0.6880 2.7500 0.1880 1.0000 1.1250
ZI03_034 2.8750 0.6880 3.7500 0.1880 1.0000 1.1250
ZI03_035 2.8750 0.6880 4.7500 0.1880 1.0000 1.1250
ZI03_036 3.3750 0.6880 1.7500 0.1880 1.0000 1.1250
ZI03_037 3.3750 0.6880 2.7500 0.1880 1.0000 1.1250
ZI03_038 3.3750 0.6880 3.7500 0.1880 1.0000 1.1250
ZI03_039 3.3750 0.6880 4.7500 0.1880 1.0000 1.1250
ZI03_040 3.8750 0.6880 1.7500 0.1880 1.0000 1.1250
ZI03_041 3.8750 0.6880 2.7500 0.1880 1.0000 1.1250
ZI03_042 3.8750 0.6880 3.7500 0.1880 1.0000 1.1250
ZI03_043 3.8750 0.6880 4.7500 0.1880 1.0000 1.1250
ZI03_044 4.3750 0.6880 1.7500 0.1880 1.0000 1.1250
ZI03_045 4.3750 0.6880 2.7500 0.1880 1.0000 1.1250
ZI03_046 4.3750 0.6880 3.7500 0.1880 1.0000 1.1250
ZI03_047 4.3750 0.6880 4.7500 0.1880 1.0000 1.1250
ZI03_048 0.8750 0.7500 1.2500 0.1880 1.0000 1.1250
ZI03_049 0.8750 0.7500 1.7500 0.1880 1.0000 1.1250
ZI03_050 0.8750 0.7500 2.7500 0.1880 1.0000 1.1250
ZI03_051 0.8750 0.7500 3.7500 0.1880 1.0000 1.1250
ZI03_052 0.8750 0.7500 4.7500 0.1880 1.0000 1.1250
ZI03_053 1.3750 0.7500 1.7500 0.1880 1.0000 1.1250
ZI03_054 1.3750 0.7500 2.7500 0.1880 1.0000 1.1250
ZI03_055 1.3750 0.7500 3.7500 0.1880 1.0000 1.1250
ZI03_056 1.3750 0.7500 4.7500 0.1880 1.0000 1.1250
InstanceName
s2 d_1 L k d_3 d_4
HASCO PINS
Mold Base Library 17 - 17
ZI03_057 1.3750 0.7500 5.7500 0.1880 1.0000 1.1250
ZI03_058 1.3750 0.7500 6.7500 0.1880 1.0000 1.1250
ZI03_059 1.3750 0.7500 7.7500 0.1880 1.0000 1.1250
ZI03_060 1.3750 0.7500 8.7500 0.1880 1.0000 1.1250
ZI03_061 1.3750 0.7500 9.7500 0.1880 1.0000 1.1250
ZI03_062 1.8750 0.7500 1.7500 0.1880 1.0000 1.1250
ZI03_063 1.8750 0.7500 2.7500 0.1880 1.0000 1.1250
ZI03_064 1.8750 0.7500 3.7500 0.1880 1.0000 1.1250
ZI03_065 1.8750 0.7500 4.7500 0.1880 1.0000 1.1250
ZI03_066 2.3750 0.7500 1.7500 0.1880 1.0000 1.1250
ZI03_067 2.3750 0.7500 2.7500 0.1880 1.0000 1.1250
ZI03_068 2.3750 0.7500 3.7500 0.1880 1.0000 1.1250
ZI03_069 2.3750 0.7500 4.7500 0.1880 1.0000 1.1250
ZI03_070 2.8750 0.7500 1.7500 0.1880 1.0000 1.1250
ZI03_071 2.8750 0.7500 2.7500 0.1880 1.0000 1.1250
ZI03_072 2.8750 0.7500 3.7500 0.1880 1.0000 1.1250
ZI03_073 2.8750 0.7500 4.7500 0.1880 1.0000 1.1250
ZI03_074 3.3750 0.7500 1.7500 0.1880 1.0000 1.1250
ZI03_075 3.3750 0.7500 2.7500 0.1880 1.0000 1.1250
ZI03_076 3.3750 0.7500 3.7500 0.1880 1.0000 1.1250
ZI03_077 3.3750 0.7500 4.7500 0.1880 1.0000 1.1250
ZI03_078 3.8750 0.7500 1.7500 0.1880 1.0000 1.1250
ZI03_079 3.8750 0.7500 2.7500 0.1880 1.0000 1.1250
ZI03_080 3.8750 0.7500 3.7500 0.1880 1.0000 1.1250
ZI03_081 3.8750 0.7500 4.7500 0.1880 1.0000 1.1250
ZI03_082 4.3750 0.7500 1.7500 0.1880 1.0000 1.1250
ZI03_083 4.3750 0.7500 2.7500 0.1880 1.0000 1.1250
ZI03_084 4.3750 0.7500 3.7500 0.1880 1.0000 1.1250
ZI03_085 4.3750 0.7500 4.7500 0.1880 1.0000 1.1250
ZI03_086 0.8750 0.9380 1.2500 0.2500 1.2500 1.3750
InstanceName
s2 d_1 L k d_3 d_4
HASCO PINS
17 - 18 Mold Base Library
ZI03_087 0.8750 0.9380 1.7500 0.2500 1.2500 1.3750
ZI03_088 0.8750 0.9380 2.2500 0.2500 1.2500 1.3750
ZI03_089 0.8750 0.9380 3.2500 0.2500 1.2500 1.3750
ZI03_090 0.8750 0.9380 4.2500 0.2500 1.2500 1.3750
ZI03_091 0.8750 0.9380 5.2500 0.2500 1.2500 1.3750
ZI03_092 0.8750 0.9380 6.2500 0.2500 1.2500 1.3750
ZI03_093 1.3750 0.9380 1.2500 0.2500 1.2500 1.3750
ZI03_094 1.3750 0.9380 1.7500 0.2500 1.2500 1.3750
ZI03_095 1.3750 0.9380 2.7500 0.2500 1.2500 1.3750
ZI03_096 1.3750 0.9380 3.7500 0.2500 1.2500 1.3750
ZI03_097 1.3750 0.9380 4.7500 0.2500 1.2500 1.3750
ZI03_098 1.3750 0.9380 5.7500 0.2500 1.2500 1.3750
ZI03_099 1.3750 0.9380 6.7500 0.2500 1.2500 1.3750
ZI03_100 1.3750 0.9380 8.7500 0.2500 1.2500 1.3750
ZI03_101 1.3750 0.9380 9.7500 0.2500 1.2500 1.3750
ZI03_102 1.3750 0.9380 10.7500 0.2500 1.2500 1.3750
ZI03_103 1.8750 0.9380 1.7500 0.2500 1.2500 1.3750
ZI03_104 1.8750 0.9380 2.2500 0.2500 1.2500 1.3750
ZI03_105 1.8750 0.9380 3.2500 0.2500 1.2500 1.3750
ZI03_106 1.8750 0.9380 4.2500 0.2500 1.2500 1.3750
ZI03_107 1.8750 0.9380 5.2500 0.2500 1.2500 1.3750
ZI03_108 1.8750 0.9380 6.2500 0.2500 1.2500 1.3750
ZI03_109 1.8750 0.9380 6.7500 0.2500 1.2500 1.3750
ZI03_110 1.8750 0.9380 7.7500 0.2500 1.2500 1.3750
ZI03_111 1.8750 0.9380 8.7500 0.2500 1.2500 1.3750
ZI03_112 1.8750 0.9380 9.7500 0.2500 1.2500 1.3750
ZI03_113 1.8750 0.9380 10.7500 0.2500 1.2500 1.3750
ZI03_114 2.3750 0.9380 1.7500 0.2500 1.2500 1.3750
ZI03_115 2.3750 0.9380 2.2500 0.2500 1.2500 1.3750
ZI03_116 2.3750 0.9380 3.2500 0.2500 1.2500 1.3750
InstanceName
s2 d_1 L k d_3 d_4
HASCO PINS
Mold Base Library 17 - 19
ZI03_117 2.3750 0.9380 4.2500 0.2500 1.2500 1.3750
ZI03_118 2.3750 0.9380 5.2500 0.2500 1.2500 1.3750
ZI03_119 2.3750 0.9380 6.2500 0.2500 1.2500 1.3750
ZI03_120 2.8750 0.9380 1.7500 0.2500 1.2500 1.3750
ZI03_121 2.8750 0.9380 2.2500 0.2500 1.2500 1.3750
ZI03_122 2.8750 0.9380 3.2500 0.2500 1.2500 1.3750
ZI03_123 2.8750 0.9380 4.2500 0.2500 1.2500 1.3750
ZI03_124 2.8750 0.9380 5.2500 0.2500 1.2500 1.3750
ZI03_125 2.8750 0.9380 6.2500 0.2500 1.2500 1.3750
ZI03_126 3.3750 0.9380 1.7500 0.2500 1.2500 1.3750
ZI03_127 3.3750 0.9380 2.2500 0.2500 1.2500 1.3750
ZI03_128 3.3750 0.9380 3.2500 0.2500 1.2500 1.3750
ZI03_129 3.3750 0.9380 4.2500 0.2500 1.2500 1.3750
ZI03_130 3.3750 0.9380 5.2500 0.2500 1.2500 1.3750
ZI03_131 3.3750 0.9380 6.2500 0.2500 1.2500 1.3750
ZI03_132 3.8750 0.9380 2.2500 0.2500 1.2500 1.3750
ZI03_133 3.8750 0.9380 3.2500 0.2500 1.2500 1.3750
ZI03_134 3.8750 0.9380 4.2500 0.2500 1.2500 1.3750
ZI03_135 3.8750 0.9380 5.2500 0.2500 1.2500 1.3750
ZI03_136 3.8750 0.9380 6.2500 0.2500 1.2500 1.3750
ZI03_137 4.3750 0.9380 1.7500 0.2500 1.2500 1.3750
ZI03_138 4.3750 0.9380 2.2500 0.2500 1.2500 1.3750
ZI03_139 4.3750 0.9380 3.2500 0.2500 1.2500 1.3750
ZI03_140 4.3750 0.9380 4.2500 0.2500 1.2500 1.3750
ZI03_141 4.3750 0.9380 5.2500 0.2500 1.2500 1.3750
ZI03_142 4.3750 0.9380 6.2500 0.2500 1.2500 1.3750
ZI03_143 4.8750 0.9380 1.7500 0.2500 1.2500 1.3750
ZI03_144 4.8750 0.9380 2.2500 0.2500 1.2500 1.3750
ZI03_145 4.8750 0.9380 3.2500 0.2500 1.2500 1.3750
ZI03_146 4.8750 0.9380 4.2500 0.2500 1.2500 1.3750
InstanceName
s2 d_1 L k d_3 d_4
HASCO PINS
17 - 20 Mold Base Library
ZI03_147 4.8750 0.9380 5.2500 0.2500 1.2500 1.3750
ZI03_148 4.8750 0.9380 6.2500 0.2500 1.2500 1.3750
ZI03_149 5.8750 0.9380 1.7500 0.2500 1.2500 1.3750
ZI03_150 5.8750 0.9380 2.2500 0.2500 1.2500 1.3750
ZI03_151 5.8750 0.9380 3.2500 0.2500 1.2500 1.3750
ZI03_152 5.8750 0.9380 4.2500 0.2500 1.2500 1.3750
ZI03_153 5.8750 0.9380 5.2500 0.2500 1.2500 1.3750
ZI03_154 5.8750 0.9380 6.2500 0.2500 1.2500 1.3750
ZI03_155 0.8750 1.0000 1.2500 0.2500 1.2500 1.3750
ZI03_156 0.8750 1.0000 1.7500 0.2500 1.2500 1.3750
ZI03_157 0.8750 1.0000 2.2500 0.2500 1.2500 1.3750
ZI03_158 0.8750 1.0000 3.2500 0.2500 1.2500 1.3750
ZI03_159 0.8750 1.0000 4.2500 0.2500 1.2500 1.3750
ZI03_160 0.8750 1.0000 5.2500 0.2500 1.2500 1.3750
ZI03_161 0.8750 1.0000 6.2500 0.2500 1.2500 1.3750
ZI03_162 1.3750 1.0000 1.2500 0.2500 1.2500 1.3750
ZI03_163 1.3750 1.0000 1.7500 0.2500 1.2500 1.3750
ZI03_164 1.3750 1.0000 2.7500 0.2500 1.2500 1.3750
ZI03_165 1.3750 1.0000 3.7500 0.2500 1.2500 1.3750
ZI03_166 1.3750 1.0000 4.7500 0.2500 1.2500 1.3750
ZI03_167 1.3750 1.0000 5.7500 0.2500 1.2500 1.3750
ZI03_168 1.3750 1.0000 6.7500 0.2500 1.2500 1.3750
ZI03_169 1.3750 1.0000 8.7500 0.2500 1.2500 1.3750
ZI03_170 1.3750 1.0000 9.7500 0.2500 1.2500 1.3750
ZI03_171 1.3750 1.0000 10.7500 0.2500 1.2500 1.3750
ZI03_172 1.8750 1.0000 1.7500 0.2500 1.2500 1.3750
ZI03_173 1.8750 1.0000 2.2500 0.2500 1.2500 1.3750
ZI03_174 1.8750 1.0000 3.2500 0.2500 1.2500 1.3750
ZI03_175 1.8750 1.0000 4.2500 0.2500 1.2500 1.3750
ZI03_176 1.8750 1.0000 5.2500 0.2500 1.2500 1.3750
InstanceName
s2 d_1 L k d_3 d_4
HASCO PINS
Mold Base Library 17 - 21
ZI03_177 1.8750 1.0000 6.2500 0.2500 1.2500 1.3750
ZI03_178 1.8750 1.0000 6.7500 0.2500 1.2500 1.3750
ZI03_179 1.8750 1.0000 7.7500 0.2500 1.2500 1.3750
ZI03_180 1.8750 1.0000 8.7500 0.2500 1.2500 1.3750
ZI03_181 1.8750 1.0000 9.7500 0.2500 1.2500 1.3750
ZI03_182 1.8750 1.0000 10.7500 0.2500 1.2500 1.3750
ZI03_183 2.3750 1.0000 1.7500 0.2500 1.2500 1.3750
ZI03_184 2.3750 1.0000 2.2500 0.2500 1.2500 1.3750
ZI03_185 2.3750 1.0000 3.2500 0.2500 1.2500 1.3750
ZI03_186 2.3750 1.0000 4.2500 0.2500 1.2500 1.3750
ZI03_187 2.3750 1.0000 5.2500 0.2500 1.2500 1.3750
ZI03_188 2.3750 1.0000 6.2500 0.2500 1.2500 1.3750
ZI03_189 2.8750 1.0000 1.7500 0.2500 1.2500 1.3750
ZI03_190 2.8750 1.0000 2.2500 0.2500 1.2500 1.3750
ZI03_191 2.8750 1.0000 3.2500 0.2500 1.2500 1.3750
ZI03_192 2.8750 1.0000 4.2500 0.2500 1.2500 1.3750
ZI03_193 2.8750 1.0000 5.2500 0.2500 1.2500 1.3750
ZI03_194 2.8750 1.0000 6.2500 0.2500 1.2500 1.3750
ZI03_195 3.3750 1.0000 1.7500 0.2500 1.2500 1.3750
ZI03_196 3.3750 1.0000 2.2500 0.2500 1.2500 1.3750
ZI03_197 3.3750 1.0000 3.2500 0.2500 1.2500 1.3750
ZI03_198 3.3750 1.0000 4.2500 0.2500 1.2500 1.3750
ZI03_199 3.3750 1.0000 5.2500 0.2500 1.2500 1.3750
ZI03_200 3.3750 1.0000 6.2500 0.2500 1.2500 1.3750
ZI03_201 3.8750 1.0000 2.2500 0.2500 1.2500 1.3750
ZI03_202 3.8750 1.0000 3.2500 0.2500 1.2500 1.3750
ZI03_203 3.8750 1.0000 4.2500 0.2500 1.2500 1.3750
ZI03_204 3.8750 1.0000 5.2500 0.2500 1.2500 1.3750
ZI03_205 3.8750 1.0000 6.2500 0.2500 1.2500 1.3750
ZI03_206 4.3750 1.0000 1.7500 0.2500 1.2500 1.3750
InstanceName
s2 d_1 L k d_3 d_4
HASCO PINS
17 - 22 Mold Base Library
ZI03_207 4.3750 1.0000 2.2500 0.2500 1.2500 1.3750
ZI03_208 4.3750 1.0000 3.2500 0.2500 1.2500 1.3750
ZI03_209 4.3750 1.0000 4.2500 0.2500 1.2500 1.3750
ZI03_210 4.3750 1.0000 5.2500 0.2500 1.2500 1.3750
ZI03_211 4.3750 1.0000 6.2500 0.2500 1.2500 1.3750
ZI03_212 4.8750 1.0000 1.7500 0.2500 1.2500 1.3750
ZI03_213 4.8750 1.0000 2.2500 0.2500 1.2500 1.3750
ZI03_214 4.8750 1.0000 3.2500 0.2500 1.2500 1.3750
ZI03_215 4.8750 1.0000 4.2500 0.2500 1.2500 1.3750
ZI03_216 4.8750 1.0000 5.2500 0.2500 1.2500 1.3750
ZI03_217 4.8750 1.0000 6.2500 0.2500 1.2500 1.3750
ZI03_218 5.8750 1.0000 1.7500 0.2500 1.2500 1.3750
ZI03_219 5.8750 1.0000 2.2500 0.2500 1.2500 1.3750
ZI03_220 5.8750 1.0000 3.2500 0.2500 1.2500 1.3750
ZI03_221 5.8750 1.0000 4.2500 0.2500 1.2500 1.3750
ZI03_222 5.8750 1.0000 5.2500 0.2500 1.2500 1.3750
ZI03_223 5.8750 1.0000 6.2500 0.2500 1.2500 1.3750
ZI03_224 0.8750 1.1880 1.7500 0.3120 1.5000 1.6250
ZI03_225 0.8750 1.1880 2.7500 0.3120 1.5000 1.6250
ZI03_226 0.8750 1.1880 3.2500 0.3120 1.5000 1.6250
ZI03_227 0.8750 1.1880 3.7500 0.3120 1.5000 1.6250
ZI03_228 0.8750 1.1880 4.2500 0.3120 1.5000 1.6250
ZI03_229 0.8750 1.1880 5.2500 0.3120 1.5000 1.6250
ZI03_230 1.3750 1.1880 1.7500 0.3120 1.5000 1.6250
ZI03_231 1.3750 1.1880 2.7500 0.3120 1.5000 1.6250
ZI03_232 1.3750 1.1880 3.7500 0.3120 1.5000 1.6250
ZI03_233 1.3750 1.1880 4.7500 0.3120 1.5000 1.6250
ZI03_234 1.3750 1.1880 5.7500 0.3120 1.5000 1.6250
ZI03_235 1.3750 1.1880 6.7500 0.3120 1.5000 1.6250
ZI03_236 1.3750 1.1880 8.7500 0.3120 1.5000 1.6250
InstanceName
s2 d_1 L k d_3 d_4
HASCO PINS
Mold Base Library 17 - 23
ZI03_237 1.3750 1.1880 9.7500 0.3120 1.5000 1.6250
ZI03_238 1.8750 1.1880 1.7500 0.3120 1.5000 1.6250
ZI03_239 1.8750 1.1880 2.2500 0.3120 1.5000 1.6250
ZI03_240 1.8750 1.1880 3.2500 0.3120 1.5000 1.6250
ZI03_241 1.8750 1.1880 4.2500 0.3120 1.5000 1.6250
ZI03_242 1.8750 1.1880 5.2500 0.3120 1.5000 1.6250
ZI03_243 1.8750 1.1880 6.2500 0.3120 1.5000 1.6250
ZI03_244 1.8750 1.1880 6.7500 0.3120 1.5000 1.6250
ZI03_245 1.8750 1.1880 7.7500 0.3120 1.5000 1.6250
ZI03_246 1.8750 1.1880 8.7500 0.3120 1.5000 1.6250
ZI03_247 1.8750 1.1880 9.7500 0.3120 1.5000 1.6250
ZI03_248 1.8750 1.1880 10.7500 0.3120 1.5000 1.6250
ZI03_250 2.3750 1.1880 2.2500 0.3120 1.5000 1.6250
ZI03_251 2.3750 1.1880 3.2500 0.3120 1.5000 1.6250
ZI03_252 2.3750 1.1880 4.2500 0.3120 1.5000 1.6250
ZI03_253 2.3750 1.1880 5.2500 0.3120 1.5000 1.6250
ZI03_254 2.3750 1.1880 6.2500 0.3120 1.5000 1.6250
ZI03_256 2.8750 1.1880 2.2500 0.3120 1.5000 1.6250
ZI03_257 2.8750 1.1880 3.2500 0.3120 1.5000 1.6250
ZI03_258 2.8750 1.1880 4.2500 0.3120 1.5000 1.6250
ZI03_259 2.8750 1.1880 5.2500 0.3120 1.5000 1.6250
ZI03_260 2.8750 1.1880 6.2500 0.3120 1.5000 1.6250
ZI03_262 3.3750 1.1880 2.2500 0.3120 1.5000 1.6250
ZI03_263 3.3750 1.1880 3.2500 0.3120 1.5000 1.6250
ZI03_264 3.3750 1.1880 4.2500 0.3120 1.5000 1.6250
ZI03_265 3.3750 1.1880 5.2500 0.3120 1.5000 1.6250
ZI03_266 3.3750 1.1880 6.2500 0.3120 1.5000 1.6250
ZI03_268 3.8750 1.1880 3.2500 0.3120 1.5000 1.6250
ZI03_269 3.8750 1.1880 4.2500 0.3120 1.5000 1.6250
ZI03_270 3.8750 1.1880 5.2500 0.3120 1.5000 1.6250
InstanceName
s2 d_1 L k d_3 d_4
HASCO PINS
17 - 24 Mold Base Library
ZI03_271 3.8750 1.1880 6.2500 0.3120 1.5000 1.6250
ZI03_273 4.3750 1.1880 2.2500 0.3120 1.5000 1.6250
ZI03_274 4.3750 1.1880 3.2500 0.3120 1.5000 1.6250
ZI03_275 4.3750 1.1880 4.2500 0.3120 1.5000 1.6250
ZI03_276 4.3750 1.1880 5.2500 0.3120 1.5000 1.6250
ZI03_277 4.3750 1.1880 6.2500 0.3120 1.5000 1.6250
ZI03_279 4.8750 1.1880 2.2500 0.3120 1.5000 1.6250
ZI03_280 4.8750 1.1880 3.2500 0.3120 1.5000 1.6250
ZI03_281 4.8750 1.1880 4.2500 0.3120 1.5000 1.6250
ZI03_282 4.8750 1.1880 5.2500 0.3120 1.5000 1.6250
ZI03_283 4.8750 1.1880 6.2500 0.3120 1.5000 1.6250
ZI03_285 5.8750 1.1880 2.2500 0.3120 1.5000 1.6250
ZI03_286 5.8750 1.1880 3.2500 0.3120 1.5000 1.6250
ZI03_287 5.8750 1.1880 4.2500 0.3120 1.5000 1.6250
ZI03_288 5.8750 1.1880 5.2500 0.3120 1.5000 1.6250
ZI03_289 5.8750 1.1880 6.2500 0.3120 1.5000 1.6250
ZI03_290 0.8750 1.2500 1.7500 0.3120 1.5000 1.6250
ZI03_291 0.8750 1.2500 2.7500 0.3120 1.5000 1.6250
ZI03_292 0.8750 1.2500 3.2500 0.3120 1.5000 1.6250
ZI03_293 0.8750 1.2500 3.7500 0.3120 1.5000 1.6250
ZI03_294 0.8750 1.2500 4.2500 0.3120 1.5000 1.6250
ZI03_295 0.8750 1.2500 5.2500 0.3120 1.5000 1.6250
ZI03_296 1.3750 1.2500 1.7500 0.3120 1.5000 1.6250
ZI03_297 1.3750 1.2500 2.7500 0.3120 1.5000 1.6250
ZI03_298 1.3750 1.2500 3.7500 0.3120 1.5000 1.6250
ZI03_299 1.3750 1.2500 4.7500 0.3120 1.5000 1.6250
ZI03_300 1.3750 1.2500 5.7500 0.3120 1.5000 1.6250
ZI03_301 1.3750 1.2500 6.7500 0.3120 1.5000 1.6250
ZI03_302 1.3750 1.2500 8.7500 0.3120 1.5000 1.6250
ZI03_303 1.3750 1.2500 9.7500 0.3120 1.5000 1.6250
InstanceName
s2 d_1 L k d_3 d_4
HASCO PINS
Mold Base Library 17 - 25
ZI03_304 1.8750 1.2500 1.7500 0.3120 1.5000 1.6250
ZI03_305 1.8750 1.2500 2.2500 0.3120 1.5000 1.6250
ZI03_306 1.8750 1.2500 3.2500 0.3120 1.5000 1.6250
ZI03_307 1.8750 1.2500 4.2500 0.3120 1.5000 1.6250
ZI03_308 1.8750 1.2500 5.2500 0.3120 1.5000 1.6250
ZI03_309 1.8750 1.2500 6.2500 0.3120 1.5000 1.6250
ZI03_310 1.8750 1.2500 6.7500 0.3120 1.5000 1.6250
ZI03_311 1.8750 1.2500 7.7500 0.3120 1.5000 1.6250
ZI03_312 1.8750 1.2500 8.7500 0.3120 1.5000 1.6250
ZI03_313 1.8750 1.2500 9.7500 0.3120 1.5000 1.6250
ZI03_314 1.8750 1.2500 10.7500 0.3120 1.5000 1.6250
ZI03_315 2.3750 1.2500 2.2500 0.3120 1.5000 1.6250
ZI03_316 2.3750 1.2500 3.2500 0.3120 1.5000 1.6250
ZI03_317 2.3750 1.2500 4.2500 0.3120 1.5000 1.6250
ZI03_318 2.3750 1.2500 5.2500 0.3120 1.5000 1.6250
ZI03_319 2.3750 1.2500 6.2500 0.3120 1.5000 1.6250
ZI03_320 2.8750 1.2500 2.2500 0.3120 1.5000 1.6250
ZI03_321 2.8750 1.2500 3.2500 0.3120 1.5000 1.6250
ZI03_322 2.8750 1.2500 4.2500 0.3120 1.5000 1.6250
ZI03_323 2.8750 1.2500 5.2500 0.3120 1.5000 1.6250
ZI03_324 2.8750 1.2500 6.2500 0.3120 1.5000 1.6250
ZI03_325 3.3750 1.2500 2.2500 0.3120 1.5000 1.6250
ZI03_326 3.3750 1.2500 3.2500 0.3120 1.5000 1.6250
ZI03_327 3.3750 1.2500 4.2500 0.3120 1.5000 1.6250
ZI03_328 3.3750 1.2500 5.2500 0.3120 1.5000 1.6250
ZI03_329 3.3750 1.2500 6.2500 0.3120 1.5000 1.6250
ZI03_330 3.8750 1.2500 3.2500 0.3120 1.5000 1.6250
ZI03_331 3.8750 1.2500 4.2500 0.3120 1.5000 1.6250
ZI03_332 3.8750 1.2500 5.2500 0.3120 1.5000 1.6250
ZI03_333 3.8750 1.2500 6.2500 0.3120 1.5000 1.6250
InstanceName
s2 d_1 L k d_3 d_4
HASCO PINS
17 - 26 Mold Base Library
ZI03_334 4.3750 1.2500 2.2500 0.3120 1.5000 1.6250
ZI03_335 4.3750 1.2500 3.2500 0.3120 1.5000 1.6250
ZI03_336 4.3750 1.2500 4.2500 0.3120 1.5000 1.6250
ZI03_337 4.3750 1.2500 5.2500 0.3120 1.5000 1.6250
ZI03_338 4.3750 1.2500 6.2500 0.3120 1.5000 1.6250
ZI03_339 4.8750 1.2500 2.2500 0.3120 1.5000 1.6250
ZI03_340 4.8750 1.2500 3.2500 0.3120 1.5000 1.6250
ZI03_341 4.8750 1.2500 4.2500 0.3120 1.5000 1.6250
ZI03_342 4.8750 1.2500 5.2500 0.3120 1.5000 1.6250
ZI03_343 4.8750 1.2500 6.2500 0.3120 1.5000 1.6250
ZI03_344 5.8750 1.2500 2.2500 0.3120 1.5000 1.6250
ZI03_345 5.8750 1.2500 3.2500 0.3120 1.5000 1.6250
ZI03_346 5.8750 1.2500 4.2500 0.3120 1.5000 1.6250
ZI03_347 5.8750 1.2500 5.2500 0.3120 1.5000 1.6250
ZI03_348 5.8750 1.2500 6.2500 0.3120 1.5000 1.6250
ZI03_349 1.3750 1.4380 1.7500 0.3120 2.0000 2.1250
ZI03_350 1.3750 1.4380 2.7500 0.3120 2.0000 2.1250
ZI03_351 1.3750 1.4380 3.7500 0.3120 2.0000 2.1250
ZI03_352 1.3750 1.4380 4.7500 0.3120 2.0000 2.1250
ZI03_353 1.3750 1.4380 5.7500 0.3120 2.0000 2.1250
ZI03_354 1.3750 1.4380 6.7500 0.3120 2.0000 2.1250
ZI03_355 1.3750 1.4380 8.7500 0.3120 2.0000 2.1250
ZI03_356 1.8750 1.4380 2.2500 0.3120 2.0000 2.1250
ZI03_357 1.8750 1.4380 3.2500 0.3120 2.0000 2.1250
ZI03_358 1.8750 1.4380 4.2500 0.3120 2.0000 2.1250
ZI03_359 1.8750 1.4380 5.2500 0.3120 2.0000 2.1250
ZI03_360 1.8750 1.4380 6.2500 0.3120 2.0000 2.1250
ZI03_361 1.8750 1.4380 7.2500 0.3120 2.0000 2.1250
ZI03_362 1.8750 1.4380 8.2500 0.3120 2.0000 2.1250
ZI03_363 1.8750 1.4380 9.2500 0.3120 2.0000 2.1250
InstanceName
s2 d_1 L k d_3 d_4
HASCO PINS
Mold Base Library 17 - 27
ZI03_364 1.8750 1.4380 10.2500 0.3120 2.0000 2.1250
ZI03_365 2.3750 1.4380 2.2500 0.3120 2.0000 2.1250
ZI03_366 2.3750 1.4380 3.2500 0.3120 2.0000 2.1250
ZI03_367 2.3750 1.4380 4.2500 0.3120 2.0000 2.1250
ZI03_368 2.3750 1.4380 5.2500 0.3120 2.0000 2.1250
ZI03_369 2.3750 1.4380 6.2500 0.3120 2.0000 2.1250
ZI03_370 2.3750 1.4380 7.2500 0.3120 2.0000 2.1250
ZI03_371 2.3750 1.4380 8.2500 0.3120 2.0000 2.1250
ZI03_372 2.3750 1.4380 9.2500 0.3120 2.0000 2.1250
ZI03_373 2.3750 1.4380 10.2500 0.3120 2.0000 2.1250
ZI03_374 2.8750 1.4380 2.2500 0.3120 2.0000 2.1250
ZI03_375 2.8750 1.4380 3.2500 0.3120 2.0000 2.1250
ZI03_376 2.8750 1.4380 4.2500 0.3120 2.0000 2.1250
ZI03_377 2.8750 1.4380 5.2500 0.3120 2.0000 2.1250
ZI03_378 2.8750 1.4380 6.2500 0.3120 2.0000 2.1250
ZI03_379 3.3750 1.4380 3.2500 0.3120 2.0000 2.1250
ZI03_380 3.3750 1.4380 4.2500 0.3120 2.0000 2.1250
ZI03_381 3.3750 1.4380 5.2500 0.3120 2.0000 2.1250
ZI03_382 3.3750 1.4380 6.2500 0.3120 2.0000 2.1250
ZI03_383 3.8750 1.4380 3.2500 0.3120 2.0000 2.1250
ZI03_384 3.8750 1.4380 4.2500 0.3120 2.0000 2.1250
ZI03_385 3.8750 1.4380 5.2500 0.3120 2.0000 2.1250
ZI03_386 3.8750 1.4380 5.7500 0.3120 2.0000 2.1250
ZI03_387 3.8750 1.4380 6.2500 0.3120 2.0000 2.1250
ZI03_388 4.3750 1.4380 3.2500 0.3120 2.0000 2.1250
ZI03_389 4.3750 1.4380 4.2500 0.3120 2.0000 2.1250
ZI03_390 4.3750 1.4380 5.2500 0.3120 2.0000 2.1250
ZI03_391 4.3750 1.4380 6.2500 0.3120 2.0000 2.1250
ZI03_392 4.8750 1.4380 3.2500 0.3120 2.0000 2.1250
ZI03_393 4.8750 1.4380 4.2500 0.3120 2.0000 2.1250
InstanceName
s2 d_1 L k d_3 d_4
HASCO PINS
17 - 28 Mold Base Library
ZI03_394 4.8750 1.4380 5.2500 0.3120 2.0000 2.1250
ZI03_395 4.8750 1.4380 6.2500 0.3120 2.0000 2.1250
ZI03_396 5.8750 1.4380 3.2500 0.3120 2.0000 2.1250
ZI03_397 5.8750 1.4380 4.2500 0.3120 2.0000 2.1250
ZI03_398 5.8750 1.4380 5.2500 0.3120 2.0000 2.1250
ZI03_399 5.8750 1.4380 6.2500 0.3120 2.0000 2.1250
ZI03_400 1.3750 1.5000 1.7500 0.3120 2.0000 2.1250
ZI03_401 1.3750 1.5000 2.7500 0.3120 2.0000 2.1250
ZI03_402 1.3750 1.5000 3.7500 0.3120 2.0000 2.1250
ZI03_403 1.3750 1.5000 4.7500 0.3120 2.0000 2.1250
ZI03_404 1.3750 1.5000 5.7500 0.3120 2.0000 2.1250
ZI03_405 1.3750 1.5000 6.7500 0.3120 2.0000 2.1250
ZI03_406 1.3750 1.5000 8.7500 0.3120 2.0000 2.1250
ZI03_407 1.8750 1.5000 2.2500 0.3120 2.0000 2.1250
ZI03_408 1.8750 1.5000 3.2500 0.3120 2.0000 2.1250
ZI03_409 1.8750 1.5000 4.2500 0.3120 2.0000 2.1250
ZI03_410 1.8750 1.5000 5.2500 0.3120 2.0000 2.1250
ZI03_411 1.8750 1.5000 6.2500 0.3120 2.0000 2.1250
ZI03_412 1.8750 1.5000 7.2500 0.3120 2.0000 2.1250
ZI03_413 1.8750 1.5000 8.2500 0.3120 2.0000 2.1250
ZI03_414 1.8750 1.5000 9.2500 0.3120 2.0000 2.1250
ZI03_415 1.8750 1.5000 10.2500 0.3120 2.0000 2.1250
ZI03_416 2.3750 1.5000 2.2500 0.3120 2.0000 2.1250
ZI03_417 2.3750 1.5000 3.2500 0.3120 2.0000 2.1250
ZI03_418 2.3750 1.5000 4.2500 0.3120 2.0000 2.1250
ZI03_419 2.3750 1.5000 5.2500 0.3120 2.0000 2.1250
ZI03_420 2.3750 1.5000 6.2500 0.3120 2.0000 2.1250
ZI03_421 2.3750 1.5000 7.2500 0.3120 2.0000 2.1250
ZI03_422 2.3750 1.5000 8.2500 0.3120 2.0000 2.1250
ZI03_423 2.3750 1.5000 9.2500 0.3120 2.0000 2.1250
InstanceName
s2 d_1 L k d_3 d_4
HASCO PINS
Mold Base Library 17 - 29
ZI03_424 2.3750 1.5000 10.2500 0.3120 2.0000 2.1250
ZI03_425 2.8750 1.5000 2.2500 0.3120 2.0000 2.1250
ZI03_426 2.8750 1.5000 3.2500 0.3120 2.0000 2.1250
ZI03_427 2.8750 1.5000 4.2500 0.3120 2.0000 2.1250
ZI03_428 2.8750 1.5000 5.2500 0.3120 2.0000 2.1250
ZI03_429 2.8750 1.5000 6.2500 0.3120 2.0000 2.1250
ZI03_430 3.3750 1.5000 3.2500 0.3120 2.0000 2.1250
ZI03_431 3.3750 1.5000 4.2500 0.3120 2.0000 2.1250
ZI03_432 3.3750 1.5000 5.2500 0.3120 2.0000 2.1250
ZI03_433 3.3750 1.5000 6.2500 0.3120 2.0000 2.1250
ZI03_434 3.8750 1.5000 3.2500 0.3120 2.0000 2.1250
ZI03_435 3.8750 1.5000 4.2500 0.3120 2.0000 2.1250
ZI03_436 3.8750 1.5000 5.2500 0.3120 2.0000 2.1250
ZI03_437 3.8750 1.5000 5.7500 0.3120 2.0000 2.1250
ZI03_438 3.8750 1.5000 6.2500 0.3120 2.0000 2.1250
ZI03_439 4.3750 1.5000 3.2500 0.3120 2.0000 2.1250
ZI03_440 4.3750 1.5000 4.2500 0.3120 2.0000 2.1250
ZI03_441 4.3750 1.5000 5.2500 0.3120 2.0000 2.1250
ZI03_442 4.3750 1.5000 6.2500 0.3120 2.0000 2.1250
ZI03_443 4.8750 1.5000 3.2500 0.3120 2.0000 2.1250
ZI03_444 4.8750 1.5000 4.2500 0.3120 2.0000 2.1250
ZI03_445 4.8750 1.5000 5.2500 0.3120 2.0000 2.1250
ZI03_446 4.8750 1.5000 6.2500 0.3120 2.0000 2.1250
ZI03_447 5.8750 1.5000 3.2500 0.3120 2.0000 2.1250
ZI03_448 5.8750 1.5000 4.2500 0.3120 2.0000 2.1250
ZI03_449 5.8750 1.5000 5.2500 0.3120 2.0000 2.1250
ZI03_450 5.8750 1.5000 6.2500 0.3120 2.0000 2.1250
InstanceName
s2 d_1 L k d_3 d_4
HASCO PINS
17 - 30 Mold Base Library
PIN, CATALOG NO. ZI41
Generic Part Name: ZI41
InstanceName
d_1 L d_2 k
ZI41_001 0.0620 6.0000 0.2500 0.1250
ZI41_002 0.0940 6.0000 0.2500 0.1250
ZI41_003 0.0940 10.0000 0.2500 0.1250
ZI41_004 0.1250 6.0000 0.2500 0.1250
ZI41_005 0.1250 10.0000 0.2500 0.1250
ZI41_006 0.1250 14.0000 0.2500 0.1250
ZI41_007 0.1410 6.0000 0.2500 0.1250
ZI41_008 0.1410 10.0000 0.2500 0.1250
ZI41_009 0.1410 14.0000 0.2500 0.1250
ZI41_010 0.1560 6.0000 0.2810 0.1560
ZI41_011 0.1560 10.0000 0.2810 0.1560
ZI41_012 0.1560 14.0000 0.2810 0.1560
ZI41_013 0.1560 18.0000 0.2810 0.1560
ZI41_014 0.1560 25.0000 0.2810 0.1560
ZI41_015 0.1720 10.0000 0.3440 0.1880
ZI41_016 0.1720 14.0000 0.3440 0.1880
ZI41_017 0.1880 6.0000 0.3750 0.1880
ZI41_018 0.1880 10.0000 0.3750 0.1880
ZI41_019 0.1880 14.0000 0.3750 0.1880
ZI41_020 0.1880 18.0000 0.3750 0.1880
HASCO PINS
Mold Base Library 17 - 31
ZI41_021 0.1880 25.0000 0.3750 0.1880
ZI41_022 0.2030 6.0000 0.3750 0.1880
ZI41_023 0.2030 10.0000 0.3750 0.1880
ZI41_024 0.2030 14.0000 0.3750 0.1880
ZI41_025 0.2190 6.0000 0.4060 0.1880
ZI41_026 0.2190 10.0000 0.4060 0.1880
ZI41_027 0.2190 14.0000 0.4060 0.1880
ZI41_028 0.2190 18.0000 0.4060 0.1880
ZI41_029 0.2190 25.0000 0.4060 0.1880
ZI41_030 0.2340 6.0000 0.4060 0.1880
ZI41_031 0.2340 10.0000 0.4060 0.1880
ZI41_032 0.2340 14.0000 0.4060 0.1880
ZI41_033 0.2500 6.0000 0.4380 0.1880
ZI41_034 0.2500 10.0000 0.4380 0.1880
ZI41_035 0.2500 14.0000 0.4380 0.1880
ZI41_036 0.2500 18.0000 0.4380 0.1880
ZI41_037 0.2500 25.0000 0.4380 0.1880
ZI41_038 0.2500 35.0000 0.4380 0.1880
ZI41_039 0.2660 10.0000 0.4380 0.2500
ZI41_040 0.2660 14.0000 0.4380 0.2500
ZI41_041 0.2660 18.0000 0.4380 0.2500
ZI41_042 0.2660 25.0000 0.4380 0.2500
ZI41_043 0.2810 10.0000 0.4380 0.2500
ZI41_044 0.2810 14.0000 0.4380 0.2500
ZI41_045 0.2810 18.0000 0.4380 0.2500
ZI41_046 0.2970 10.0000 0.5000 0.2500
ZI41_047 0.2970 14.0000 0.5000 0.2500
ZI41_048 0.3120 6.0000 0.5000 0.2500
ZI41_049 0.3120 10.0000 0.5000 0.2500
ZI41_050 0.3120 14.0000 0.5000 0.2500
InstanceName
d_1 L d_2 k
HASCO PINS
17 - 32 Mold Base Library
ZI41_051 0.3120 18.0000 0.5000 0.2500
ZI41_052 0.3440 10.0000 0.5620 0.2500
ZI41_053 0.3440 14.0000 0.5620 0.2500
ZI41_054 0.3440 18.0000 0.5620 0.2500
ZI41_055 0.3440 25.0000 0.5620 0.2500
ZI41_056 0.3590 10.0000 0.6250 0.2500
ZI41_057 0.3590 14.0000 0.6250 0.2500
ZI41_058 0.3750 6.0000 0.6250 0.2500
ZI41_059 0.3750 10.0000 0.6250 0.2500
ZI41_060 0.3750 14.0000 0.6250 0.2500
ZI41_061 0.3750 18.0000 0.6250 0.2500
ZI41_062 0.4060 10.0000 0.6880 0.2500
ZI41_063 0.4060 14.0000 0.6880 0.2500
ZI41_064 0.4060 18.0000 0.6880 0.2500
ZI41_065 0.4060 25.0000 0.6880 0.2500
ZI41_066 0.4380 10.0000 0.6880 0.2500
ZI41_067 0.4380 14.0000 0.6880 0.2500
ZI41_068 0.4380 18.0000 0.6880 0.2500
ZI41_069 0.4380 25.0000 0.6880 0.2500
ZI41_070 0.5000 6.0000 0.7500 0.2500
ZI41_071 0.5000 10.0000 0.7500 0.2500
ZI41_072 0.5000 14.0000 0.7500 0.2500
ZI41_073 0.5000 18.0000 0.7500 0.2500
ZI41_074 0.5000 25.0000 0.7500 0.2500
ZI41_075 0.6250 6.0000 0.8750 0.2500
ZI41_076 0.6250 10.0000 0.8750 0.2500
ZI41_077 0.6250 14.0000 0.8750 0.2500
ZI41_078 0.6250 18.0000 0.8750 0.2500
ZI41_079 0.6250 25.0000 0.8750 0.2500
ZI41_080 0.6250 35.0000 0.8750 0.2500
InstanceName
d_1 L d_2 k
HASCO PINS
Mold Base Library 17 - 33
ZI41_081 0.7500 6.0000 1.0000 0.2500
ZI41_082 0.7500 10.0000 1.0000 0.2500
ZI41_083 0.7500 14.0000 1.0000 0.2500
ZI41_084 0.7500 18.0000 1.0000 0.2500
ZI41_085 0.7500 25.0000 1.0000 0.2500
ZI41_086 0.8750 6.0000 1.1250 0.2500
ZI41_087 0.8750 10.0000 1.1250 0.2500
ZI41_088 0.8750 14.0000 1.1250 0.2500
ZI41_089 0.8750 18.0000 1.1250 0.2500
ZI41_090 0.8750 25.0000 1.1250 0.2500
ZI41_091 1.0000 6.0000 1.2500 0.2500
ZI41_092 1.0000 10.0000 1.2500 0.2500
ZI41_093 1.0000 14.0000 1.2500 0.2500
InstanceName
d_1 L d_2 k
HASCO PINS
17 - 34 Mold Base Library
PIN, CATALOG NO. ZI551
Generic Part Name: ZI551
InstanceName
head_height
ZI551_1 0.1250
ZI551_2 0.1875
Mold Base Library 18 - 1
13HASCO SPRUE BUSHINGS
SPRUE BUSHING, CATALOG NO. ZI512
Generic Part Name: ZI512
InstanceName
d_2 L d R
ZI512_010 1.00 1.3750 0.1560 0.50
ZI512_011 1.00 1.8750 0.1560 0.50
ZI512_012 1.00 2.3750 0.1560 0.50
ZI512_013 1.00 2.8750 0.1560 0.50
ZI512_014 1.00 3.3750 0.1560 0.50
ZI512_015 1.00 1.3750 0.2190 0.50
ZI512_016 1.00 1.8750 0.2190 0.50
ZI512_017 1.00 2.3750 0.2190 0.50
ZI512_018 1.00 2.8750 0.2190 0.50
ZI512_019 1.00 3.3750 0.2190 0.50
ZI512_020 1.00 3.8750 0.2190 0.50
ZI512_021 1.00 4.3750 0.2190 0.50
ZI512_022 1.00 4.8750 0.2190 0.50
ZI512_023 1.00 5.3750 0.2190 0.50
ZI512_024 1.00 6.3750 0.2190 0.50
HASCO SPRUE BUSHINGS
18 - 2 Mold Base Library
ZI512_025 1.00 1.3750 0.2810 0.50
ZI512_026 1.00 1.8750 0.2810 0.50
ZI512_027 1.00 2.3750 0.2810 0.50
ZI512_028 1.00 2.8750 0.2810 0.50
ZI512_029 1.00 3.3750 0.2810 0.50
ZI512_030 1.00 3.8750 0.2810 0.50
ZI512_031 1.00 4.3750 0.2810 0.50
ZI512_032 1.00 4.8750 0.2810 0.50
ZI512_033 1.00 5.3750 0.2810 0.50
ZI512_034 1.00 6.3750 0.2810 0.50
ZI512_035 1.00 1.8750 0.3440 0.50
ZI512_036 1.00 2.3750 0.3440 0.50
ZI512_037 1.00 2.8750 0.3440 0.50
ZI512_038 1.00 3.3750 0.3440 0.50
ZI512_039 1.00 3.8750 0.3440 0.50
ZI512_040 1.00 4.3750 0.3440 0.50
ZI512_041 1.00 4.8750 0.3440 0.50
ZI512_042 1.00 5.3750 0.3440 0.50
ZI512_043 1.00 1.3750 0.1560 0.75
ZI512_044 1.00 1.8750 0.1560 0.75
ZI512_045 1.00 2.3750 0.1560 0.75
ZI512_046 1.00 2.8750 0.1560 0.75
ZI512_047 1.00 3.3750 0.1560 0.75
ZI512_048 1.00 1.3750 0.2190 0.75
ZI512_049 1.00 1.8750 0.2190 0.75
ZI512_050 1.00 2.3750 0.2190 0.75
ZI512_051 1.00 2.8750 0.2190 0.75
ZI512_052 1.00 3.3750 0.2190 0.75
ZI512_053 1.00 3.8750 0.2190 0.75
ZI512_054 1.00 4.3750 0.2190 0.75
InstanceName
d_2 L d R
HASCO SPRUE BUSHINGS
Mold Base Library 18 - 3
ZI512_055 1.00 4.8750 0.2190 0.75
ZI512_056 1.00 5.3750 0.2190 0.75
ZI512_057 1.00 6.3750 0.2190 0.75
ZI512_058 1.00 1.3750 0.2810 0.75
ZI512_059 1.00 1.8750 0.2810 0.75
ZI512_060 1.00 2.3750 0.2810 0.75
ZI512_061 1.00 2.8750 0.2810 0.75
ZI512_062 1.00 3.3750 0.2810 0.75
ZI512_063 1.00 3.8750 0.2810 0.75
ZI512_064 1.00 4.3750 0.2810 0.75
ZI512_065 1.00 4.8750 0.2810 0.75
ZI512_066 1.00 5.3750 0.2810 0.75
ZI512_067 1.00 6.3750 0.2810 0.75
ZI512_068 1.00 1.8750 0.3440 0.75
ZI512_069 1.00 2.3750 0.3440 0.75
ZI512_070 1.00 2.8750 0.3440 0.75
ZI512_071 1.00 3.3750 0.3440 0.75
ZI512_072 1.00 3.8750 0.3440 0.75
ZI512_073 1.00 4.3750 0.3440 0.75
ZI512_074 1.00 4.8750 0.3440 0.75
ZI512_075 1.00 5.3750 0.3440 0.75
InstanceName
d_2 L d R
HASCO SPRUE BUSHINGS
18 - 4 Mold Base Library
SPRUE BUSHING, CATALOG NO. ZI513
Generic Part Name: ZI513
InstanceName
d_2 L d R
ZI513_010 0.7500 1.6250 0.1560 0.50
ZI513_011 0.7500 2.1250 0.1560 0.50
ZI513_012 0.7500 2.6250 0.1560 0.50
ZI513_013 0.7500 3.1250 0.1560 0.50
ZI513_014 0.7500 3.6250 0.1560 0.50
ZI513_015 0.7500 4.1250 0.1560 0.50
ZI513_016 0.7500 4.6250 0.1560 0.50
ZI513_017 0.7500 5.1250 0.1560 0.50
ZI513_018 0.7500 1.6250 0.2190 0.50
ZI513_019 0.7500 2.1250 0.2190 0.50
ZI513_020 0.7500 2.6250 0.2190 0.50
ZI513_021 0.7500 3.1250 0.2190 0.50
ZI513_022 0.7500 3.6250 0.2190 0.50
ZI513_023 0.7500 4.1250 0.2190 0.50
ZI513_024 0.7500 4.6250 0.2190 0.50
ZI513_025 0.7500 5.1250 0.2190 0.50
ZI513_026 1.0000 1.6250 0.1560 0.50
HASCO SPRUE BUSHINGS
Mold Base Library 18 - 5
ZI513_027 1.0000 2.1250 0.1560 0.50
ZI513_028 1.0000 2.6250 0.1560 0.50
ZI513_029 1.0000 3.1250 0.1560 0.50
ZI513_030 1.0000 3.6250 0.1560 0.50
ZI513_031 1.0000 4.1250 0.1560 0.50
ZI513_032 1.0000 1.6250 0.2190 0.50
ZI513_033 1.0000 2.1250 0.2190 0.50
ZI513_034 1.0000 2.6250 0.2190 0.50
ZI513_035 1.0000 3.1250 0.2190 0.50
ZI513_036 1.0000 3.6250 0.2190 0.50
ZI513_037 1.0000 4.1250 0.2190 0.50
ZI513_038 1.0000 1.6250 0.2810 0.50
ZI513_039 1.0000 2.1250 0.2810 0.50
ZI513_040 1.0000 2.6250 0.2810 0.50
ZI513_041 1.0000 3.1250 0.2810 0.50
ZI513_042 1.0000 3.6250 0.2810 0.50
ZI513_043 1.0000 4.1250 0.2810 0.50
ZI513_044 0.7500 1.6250 0.1560 0.75
ZI513_045 0.7500 2.1250 0.1560 0.75
ZI513_046 0.7500 2.6250 0.1560 0.75
ZI513_047 0.7500 3.1250 0.1560 0.75
ZI513_048 0.7500 3.6250 0.1560 0.75
ZI513_049 0.7500 4.1250 0.1560 0.75
ZI513_050 0.7500 4.6250 0.1560 0.75
ZI513_051 0.7500 5.1250 0.1560 0.75
ZI513_052 0.7500 1.6250 0.2190 0.75
ZI513_053 0.7500 2.1250 0.2190 0.75
ZI513_054 0.7500 2.6250 0.2190 0.75
ZI513_055 0.7500 3.1250 0.2190 0.75
ZI513_056 0.7500 3.6250 0.2190 0.75
InstanceName
d_2 L d R
HASCO SPRUE BUSHINGS
18 - 6 Mold Base Library
ZI513_057 0.7500 4.1250 0.2190 0.75
ZI513_058 0.7500 4.6250 0.2190 0.75
ZI513_059 0.7500 5.1250 0.2190 0.75
ZI513_060 1.0000 1.6250 0.1560 0.75
ZI513_061 1.0000 2.1250 0.1560 0.75
ZI513_062 1.0000 2.6250 0.1560 0.75
ZI513_063 1.0000 3.1250 0.1560 0.75
ZI513_064 1.0000 3.6250 0.1560 0.75
ZI513_065 1.0000 4.1250 0.1560 0.75
ZI513_066 1.0000 1.6250 0.2190 0.75
ZI513_067 1.0000 2.1250 0.2190 0.75
ZI513_068 1.0000 2.6250 0.2190 0.75
ZI513_069 1.0000 3.1250 0.2190 0.75
ZI513_070 1.0000 3.6250 0.2190 0.75
ZI513_071 1.0000 4.1250 0.2190 0.75
ZI513_072 1.0000 1.6250 0.2810 0.75
ZI513_073 1.0000 2.1250 0.2810 0.75
ZI513_074 1.0000 2.6250 0.2810 0.75
ZI513_075 1.0000 3.1250 0.2810 0.75
ZI513_076 1.0000 3.6250 0.2810 0.75
ZI513_077 1.0000 4.1250 0.2810 0.75
InstanceName
d_2 L d R
Mold Base Library 19 - 1
13HASCO SCREWS
SCREW, CATALOG NO. ZI31
Generic Part Name: ZI31
InstanceName
BASICDIA
thread_dia D k SW b L
ZI31_01 #6-32 0.1380 0.2260 0.1380 0.1110 .19-.94 1/4 to 1
ZI31_02 #8-32 0.1640 0.2700 0.1640 0.1430 .19-.87 1/4 to 1-1/2
ZI31_03 #10-24 0.1900 0.3120 0.1900 0.1590 .29-.87 3/8 to 2
ZI31_04 1/4-20 0.2500 0.3750 0.2500 0.1900 .28-1.00 3/8 to 3
ZI31_05 5/16-18 0.3120 0.4690 0.3120 0.2530 .26-1.13 3/8 to 3-1/2
ZI31_06 3/8-16 0.3750 0.5620 0.3750 0.3160 .38-1.25 1/2 to 6
ZI31_07 1/2-13 0.5000 0.7500 0.5000 0.3790 .35-1.50 1/2 to 12
ZI31_08 5/8-11 0.6250 0.9380 0.6250 0.5050 .82-1.75 1 to 12
HASCO SCREWS
19 - 2 Mold Base Library
SCREW, CATALOG NO. ZI33
Generic Part Name: ZI33
InstanceName
thread_dia
DHead
Diameter
kHead
HeightSW
LTotal
Length
bThreadLength
ZI33_0101 0.1120 0.2180 0.0820 0.0630 0.3750 0.2400
ZI33_0102 0.1120 0.2180 0.0820 0.0630 0.5000 0.3700
ZI33_0103 0.1120 0.2180 0.0820 0.0630 0.6250 0.4900
ZI33_0201 0.1250 0.2400 0.0900 0.0780 0.3750 0.2400
ZI33_0202 0.1250 0.2400 0.0900 0.0780 0.5000 0.3600
ZI33_0203 0.1250 0.2400 0.0900 0.0780 0.6250 0.4900
ZI33_0301 0.1380 0.2630 0.0970 0.0780 0.3750 0.2200
ZI33_0302 0.1380 0.2630 0.0970 0.0780 0.5000 0.3400
ZI33_0303 0.1380 0.2630 0.0970 0.0780 0.6250 0.4700
ZI33_0401 0.1640 0.3110 0.1120 0.0940 0.3750 0.2000
ZI33_0402 0.1640 0.3110 0.1120 0.0940 0.5000 0.3300
ZI33_0403 0.1640 0.3110 0.1120 0.0940 0.6250 0.4500
ZI33_0404 0.1640 0.3110 0.1120 0.0940 0.7500 0.5800
ZI33_0501 0.2500 0.4800 0.1620 0.1560 0.5000 0.2400
ZI33_0502 0.2500 0.4800 0.1620 0.1560 0.6250 0.3600
ZI33_0503 0.2500 0.4800 0.1620 0.1560 0.7500 0.4900
ZI33_0504 0.2500 0.4800 0.1620 0.1560 1.0000 0.7400
HASCO SCREWS
Mold Base Library 19 - 3
ZI33_0601 0.3120 0.6000 0.1980 0.1880 0.5000 0.1900
ZI33_0602 0.3120 0.6000 0.1980 0.1880 0.7500 0.4400
ZI33_0603 0.3120 0.6000 0.1980 0.1880 0.8750 0.5700
ZI33_0604 0.3120 0.6000 0.1980 0.1880 1.0000 0.6900
ZI33_0701 0.3750 0.7200 0.2340 0.2190 0.7500 0.3900
ZI33_0702 0.3750 0.7200 0.2340 0.2190 1.0000 0.6400
ZI33_0703 0.3750 0.7200 0.2340 0.2190 1.2500 0.8900
ZI33_0801 0.5000 0.8720 0.2510 0.3130 0.7500 0.3500
ZI33_0802 0.5000 0.8720 0.2510 0.3130 1.0000 0.6000
ZI33_0803 0.5000 0.8720 0.2510 0.3130 1.2500 0.8500
ZI33_0804 0.5000 0.8720 0.2510 0.3130 1.5000 1.1000
ZI33_0901 0.6250 1.1120 0.3240 0.3750 1.2500 0.7400
ZI33_0902 0.6250 1.1120 0.3240 0.3750 1.5000 1.0000
ZI33_0903 0.6250 1.1120 0.3240 0.3750 2.0000 1.5000
ZI33_1001 0.7500 1.3550 0.3960 0.5000 1.5000 0.9000
ZI33_1002 0.7500 1.3550 0.3960 0.5000 2.0000 1.4000
ZI33_1003 0.7500 1.3550 0.3960 0.5000 2.5000 1.9000
InstanceName
thread_dia
DHead
Diameter
kHead
HeightSW
LTotal
Length
bThreadLength
HASCO SCREWS
19 - 4 Mold Base Library
SCREW, CATALOG NO. ZI35
Generic Part Name: ZI35
InstanceName
thread_dia L SW
ZI35_0101 0.1120 0.1250 0.0500
ZI35_0102 0.1120 0.1880 0.0500
ZI35_0103 0.1120 0.2500 0.0500
ZI35_0201 0.1250 0.1880 0.0630
ZI35_0301 0.1380 0.2500 0.0630
ZI35_0302 0.1380 0.3750 0.0630
ZI35_0303 0.1380 0.5000 0.0630
ZI35_0401 0.1640 0.2500 0.0780
ZI35_0402 0.1640 0.5000 0.0780
ZI35_0501 0.1900 0.2500 0.0940
ZI35_0502 0.1900 0.3750 0.0940
ZI35_0503 0.1900 0.5000 0.0940
ZI35_0601 0.2500 0.2500 0.1250
ZI35_0602 0.2500 0.3750 0.1250
ZI35_0701 0.3120 0.5000 0.1560
ZI35_0801 0.3750 0.5000 0.1880
ZI35_0802 0.3750 0.7500 0.1880
ZI35_0901 0.5000 0.7500 0.2500
HASCO SCREWS
Mold Base Library 19 - 5
SCREW, CATALOG NO. ZI38
Generic Part Name: ZI38
InstanceName
D_1BodyDia.
Lthread_
diaThreadsPer Inch
B D k SW
ZI38-0101 0.2500 0.5000 0.1900 24.0000 0.3750 0.3750 0.1880 0.1250
ZI38_0102 0.2500 0.7500 0.1900 24.0000 0.3750 0.3750 0.1880 0.1250
ZI38_0103 0.2500 1.0000 0.1900 24.0000 0.3750 0.3750 0.1880 0.1250
ZI38-0104 0.2500 1.2500 0.1900 24.0000 0.3750 0.3750 0.1880 0.1250
ZI38_0105 0.2500 1.5000 0.1900 24.0000 0.3750 0.3750 0.1880 0.1250
ZI38-0201 0.3120 0.5000 0.2500 20.0000 0.4380 0.4380 0.2190 0.1560
ZI38_0202 0.3120 0.7500 0.2500 20.0000 0.4380 0.4380 0.2190 0.1560
ZI38_0203 0.3120 1.0000 0.2500 20.0000 0.4380 0.4380 0.2190 0.1560
ZI38-0204 0.3120 1.2500 0.2500 20.0000 0.4380 0.4380 0.2190 0.1560
ZI38_0205 0.3120 1.5000 0.2500 20.0000 0.4380 0.4380 0.2190 0.1560
ZI38-0206 0.3120 1.7500 0.2500 20.0000 0.4380 0.4380 0.2190 0.1560
ZI38-0207 0.3120 2.0000 0.2500 20.0000 0.4380 0.4380 0.2190 0.1560
ZI38-0301 0.3750 1.0000 0.3120 18.0000 0.5000 0.5620 0.2500 0.1880
ZI38_0302 0.3750 1.2500 0.3120 18.0000 0.5000 0.5620 0.2500 0.1880
ZI38_0303 0.3750 1.5000 0.3120 18.0000 0.5000 0.5620 0.2500 0.1880
ZI38-0304 0.3750 1.7500 0.3120 18.0000 0.5000 0.5620 0.2500 0.1880
ZI38_0305 0.3750 2.0000 0.3120 18.0000 0.5000 0.5620 0.2500 0.1880
ZI38-0306 0.3750 2.2500 0.3120 18.0000 0.5000 0.5620 0.2500 0.1880
HASCO SCREWS
19 - 6 Mold Base Library
ZI38-0307 0.3750 2.5000 0.3120 18.0000 0.5000 0.5620 0.2500 0.1880
ZI38_0308 0.3750 2.7500 0.3120 18.0000 0.5000 0.5620 0.2500 0.1880
ZI38-0309 0.3750 3.0000 0.3120 18.0000 0.5000 0.5620 0.2500 0.1880
ZI38-0310 0.3750 3.2500 0.3120 18.0000 0.5000 0.5620 0.2500 0.1880
ZI38-0311 0.3750 3.5000 0.3120 18.0000 0.5000 0.5620 0.2500 0.1880
ZI38_0312 0.3750 3.7500 0.3120 18.0000 0.5000 0.5620 0.2500 0.1880
ZI38_0313 0.3750 4.0000 0.3120 18.0000 0.5000 0.5620 0.2500 0.1880
ZI38-0401 0.5000 1.0000 0.3750 16.0000 0.6250 0.7500 0.3120 0.2500
ZI38_0402 0.5000 1.2500 0.3750 16.0000 0.6250 0.7500 0.3120 0.2500
ZI38_0403 0.5000 1.5000 0.3750 16.0000 0.6250 0.7500 0.3120 0.2500
ZI38-0404 0.5000 1.7500 0.3750 16.0000 0.6250 0.7500 0.3120 0.2500
ZI38_0405 0.5000 2.0000 0.3750 16.0000 0.6250 0.7500 0.3120 0.2500
ZI38-0406 0.5000 2.2500 0.3750 16.0000 0.6250 0.7500 0.3120 0.2500
ZI38-0407 0.5000 2.5000 0.3750 16.0000 0.6250 0.7500 0.3120 0.2500
ZI38_0408 0.5000 2.7500 0.3750 16.0000 0.6250 0.7500 0.3120 0.2500
ZI38-0409 0.5000 3.0000 0.3750 16.0000 0.6250 0.7500 0.3120 0.2500
ZI38-0410 0.5000 3.2500 0.3750 16.0000 0.6250 0.7500 0.3120 0.2500
ZI38-0411 0.5000 3.5000 0.3750 16.0000 0.6250 0.7500 0.3120 0.2500
ZI38_0412 0.5000 3.7500 0.3750 16.0000 0.6250 0.7500 0.3120 0.2500
ZI38_0413 0.5000 4.0000 0.3750 16.0000 0.6250 0.7500 0.3120 0.2500
ZI38-0414 0.5000 4.2500 0.3750 16.0000 0.6250 0.7500 0.3120 0.2500
ZI38_0415 0.5000 4.5000 0.3750 16.0000 0.6250 0.7500 0.3120 0.2500
ZI38-0416 0.5000 4.7500 0.3750 16.0000 0.6250 0.7500 0.3120 0.2500
ZI38-0417 0.5000 5.0000 0.3750 16.0000 0.6250 0.7500 0.3120 0.2500
ZI38-0501 0.6250 1.0000 0.5000 13.0000 0.7500 0.8750 0.3750 0.3120
ZI38_0502 0.6250 1.2500 0.5000 13.0000 0.7500 0.8750 0.3750 0.3120
ZI38_0503 0.6250 1.5000 0.5000 13.0000 0.7500 0.8750 0.3750 0.3120
ZI38-0504 0.6250 1.7500 0.5000 13.0000 0.7500 0.8750 0.3750 0.3120
ZI38_0505 0.6250 2.0000 0.5000 13.0000 0.7500 0.8750 0.3750 0.3120
ZI38-0506 0.6250 2.2500 0.5000 13.0000 0.7500 0.8750 0.3750 0.3120
InstanceName
D_1BodyDia.
Lthread_
diaThreadsPer Inch
B D k SW
HASCO SCREWS
Mold Base Library 19 - 7
ZI38-0507 0.6250 2.5000 0.5000 13.0000 0.7500 0.8750 0.3750 0.3120
ZI38_0508 0.6250 2.7500 0.5000 13.0000 0.7500 0.8750 0.3750 0.3120
ZI38-0509 0.6250 3.0000 0.5000 13.0000 0.7500 0.8750 0.3750 0.3120
ZI38-0510 0.6250 3.2500 0.5000 13.0000 0.7500 0.8750 0.3750 0.3120
ZI38-0511 0.6250 3.5000 0.5000 13.0000 0.7500 0.8750 0.3750 0.3120
ZI38_0512 0.6250 3.7500 0.5000 13.0000 0.7500 0.8750 0.3750 0.3120
ZI38_0513 0.6250 4.0000 0.5000 13.0000 0.7500 0.8750 0.3750 0.3120
ZI38-0514 0.6250 4.2500 0.5000 13.0000 0.7500 0.8750 0.3750 0.3120
ZI38_0515 0.6250 4.5000 0.5000 13.0000 0.7500 0.8750 0.3750 0.3120
ZI38-0516 0.6250 4.7500 0.5000 13.0000 0.7500 0.8750 0.3750 0.3120
ZI38-0517 0.6250 5.0000 0.5000 13.0000 0.7500 0.8750 0.3750 0.3120
ZI38_0518 0.6250 5.5000 0.5000 13.0000 0.7500 0.8750 0.3750 0.3120
ZI38-0519 0.6250 6.0000 0.5000 13.0000 0.7500 0.8750 0.3750 0.3120
ZI38-0601 0.7500 1.2500 0.6250 11.0000 0.8750 1.0000 0.5000 0.3750
ZI38_0602 0.7500 1.5000 0.6250 11.0000 0.8750 1.0000 0.5000 0.3750
ZI38_0603 0.7500 1.7500 0.6250 11.0000 0.8750 1.0000 0.5000 0.3750
ZI38-0604 0.7500 2.0000 0.6250 11.0000 0.8750 1.0000 0.5000 0.3750
ZI38_0605 0.7500 2.2500 0.6250 11.0000 0.8750 1.0000 0.5000 0.3750
ZI38-0606 0.7500 2.5000 0.6250 11.0000 0.8750 1.0000 0.5000 0.3750
ZI38-0607 0.7500 2.7500 0.6250 11.0000 0.8750 1.0000 0.5000 0.3750
ZI38_0608 0.7500 3.0000 0.6250 11.0000 0.8750 1.0000 0.5000 0.3750
ZI38-0609 0.7500 3.2500 0.6250 11.0000 0.8750 1.0000 0.5000 0.3750
ZI38-0610 0.7500 3.5000 0.6250 11.0000 0.8750 1.0000 0.5000 0.3750
ZI38-0611 0.7500 3.7500 0.6250 11.0000 0.8750 1.0000 0.5000 0.3750
ZI38_0612 0.7500 4.0000 0.6250 11.0000 0.8750 1.0000 0.5000 0.3750
ZI38_0613 0.7500 4.2500 0.6250 11.0000 0.8750 1.0000 0.5000 0.3750
ZI38-0614 0.7500 4.5000 0.6250 11.0000 0.8750 1.0000 0.5000 0.3750
ZI38_0615 0.7500 4.7500 0.6250 11.0000 0.8750 1.0000 0.5000 0.3750
ZI38-0616 0.7500 5.0000 0.6250 11.0000 0.8750 1.0000 0.5000 0.3750
ZI38-0617 0.7500 5.5000 0.6250 11.0000 0.8750 1.0000 0.5000 0.3750
InstanceName
D_1BodyDia.
Lthread_
diaThreadsPer Inch
B D k SW
HASCO SCREWS
19 - 8 Mold Base Library
ZI38_0618 0.7500 6.0000 0.6250 11.0000 0.8750 1.0000 0.5000 0.3750
ZI38-0619 0.7500 6.5000 0.6250 11.0000 0.8750 1.0000 0.5000 0.3750
ZI38-0620 0.7500 7.0000 0.6250 11.0000 0.8750 1.0000 0.5000 0.3750
InstanceName
D_1BodyDia.
Lthread_
diaThreadsPer Inch
B D k SW
Mold Base Library 20 - 1
1HASCO METRIC MOLD BASE ASSEMBLIES
This chapter describes the HASCO metric mold base assemblies. The chapter contains thefollowing sections:
• Naming conventions• Tables of mold base sizes
NAMING CONVENTION
The parts and assemblies in the MOLD BASE LIBRARY are namedaccording to the following conventions.
Figure 20-1Metric Mold Base Assembly
Assemblies of the metric mold bases include the following:
• Two clamping plates• One cavity plate• One backup plate• Two ejector plates• One stop disc• One spacer block
HASCO METRIC MOLD BASE ASSEMBLIES
20 - 2 Mold Base Library
Mold Base Assembly
Figure 20-1 shows an example of a mold base assembly created withplates and components from the HASCO K series.
The HASCO mold library contains two subdirectories:
• assy_plates• components
Names for parts are generally the same as their corresponding catalogname order in the HASCO Company’s catalog. Generally, hyphensand spaces have been omitted or changed to underscores to make thecatalog numbers and instance names valid for use in Pro/ENGINEER.Each subdirectory contains all the plates for that size and one typicalmold base assembly.
A typical mold base with the dimensions "396 by 546mm" is locatedin the directory 396x546, and is listed as follows:
K396x546t.asm
After you select the typical mold base, you can select the genericassembly or an instance. Selecting the instance allows you to use theindividual plate instances to create a customized mold.
NOTE: You must create a search path for "kst_disc" in theconfig.pro file to access this part.
The following sections contain information on the K series platetypes, and the instances for each.
Clamping Plates
Clamping plates, K series, size 396x546mm Kcl396546 have thefollowing four instances:
Generic: K10-396546 (type K10) with four instancesInstance: 104055_046 - The thickness is 46 mm.
104055_036 - The thickness is 36 mm.Generic: K11-396546 (type K11)Instance: 114055_046 - The thickness is 46 mm.
114055_036 - The thickness is 36 mm.Generic: K15-396546Instance: 154055_046 - The thickness is 46 mm.
154055_036 - The thickness is 36 mm.Generic: K16-396546Instance: 164055_046 - The thickness is 46 mm.
164055_036 - The thickness is 36 mm.
HASCO METRIC MOLD BASE ASSEMBLIES
Mold Base Library 20 - 3
Cavity Plate
Cavity plates have two instances that define different thicknesses. Thenames are as follows:
Generic: K20-396546 (type K20)Instances: 204055_136 - The thickness is 136 mm.
204055_096 - The thickness is 96 mm.Generic: K251396546 (type K251)Instances: 254055_136 - The thickness is 136 mm.
254055_096 - The thickness is 96 mm.
Back Up Plates
Back up plates have one instance. The name is as follows:
Generic: K30-396546, size 396x546 mm (type K30)Instances: 2304055_046 - The thickness is 46 mm.
304055_056 - The thickness is 56 mm.
Spacer Blocks
Spacer blocks have two instances. The names are as follows:
Generic: K40-396546, for base size 396x546 mm (type K40)Instances: 404055_136 - The thickness is 136 mm.
404055_096 - The thickness is 96 mm.
Ejector Retaining Plates
Ejector retaining plates have two instances. The names are as follows:
Generic: K60-396546, for base size 396x546 mm (type K60)Instance: 604055_017 - The thickness is 17 mm.Generic: K61-396546 for base size 396x546 mm (type K61)Instance: 614055_017 - The thickness is 17 mm.
Ejector Base Plates
Ejector plates have two instances. The names are as follows:
Generic: K70-396546, for base size 396x546 mm (type K70)Instance: 704055_027 - The thickness is 27 mm.Generic: K71-396546, for base size 396x546 mm (type K71)Instance: 714055_027 - The thickness is 27 mm.
HASCO METRIC MOLD BASE ASSEMBLIES
20 - 4 Mold Base Library
Component Parts
Component parts are named as abbreviated forms of their names in theHASCO Company catalog; instance names correspond exactly to thecatalog numbers. All component parts are located in the directorycomponents, in subdirectories named for the types of parts theycontain.
TABLE OF MOLD BASE SIZES
The following tables list all the mold base sizes. Note that alldimensions are expressed in millimeters.
095x095COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 12 to 22
Bottom Clamping Plates (K11, K13, & K16) 12 to 22
Cavity Plates (K20 & K251) 6 to 17
Back Up Plate (K30) 9 to 56
Ejector Base Plates (K70 & K71) 9
Ejector Retainer Plates (K60 & K61) 6
Spacer Blocks (K40 & K41) 22 to 46
Stop Disc (Z551-1 & Z551-2) N/A
100x130COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 9 to 22
Bottom Clamping Plates (K11, K13, & K16) 9 to 22
Cavity Plates (K20 & K251) 6 to 17
Back Up Plate (K30) 9 to 56
Ejector Base Plates (K70 & K71) 9
Ejector Retainer Plates (K60 & K61) 6
Spacer Blocks (K40 & K41) 9 to 22
Stop Disc (Z551-1 & Z551-2) N/A
HASCO METRIC MOLD BASE ASSEMBLIES
Mold Base Library 20 - 5
156x156COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 17 to 27
Bottom Clamping Plates (K11, K13, & K16) 17 to 27
Cavity Plates (K20 & K251) 27 to 36
Back Up Plate (K30) 17 to 76
Ejector Base Plates (K70 & K71) 17
Ejector Retainer Plates (K60 & K61) 9
Spacer Blocks (K40 & K41) 46 to 76
Stop Disc (Z551-1 & Z551-2) 3
156x196COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 17 to 27
Bottom Clamping Plates (K11, K13, & K16) 17 to 27
Cavity Plates (K20 & K251) 27 to 36
Back Up Plate (K30) 17 to 76
Ejector Base Plates (K70 & K71) 17
Ejector Retainer Plates (K60 & K61) 9
Spacer Blocks (K40 & K41) 46 to 76
Stop Disc (Z551-1 & Z551-2) 3
156x246COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 17 to 27
Bottom Clamping Plates (K11, K13, & K16) 17 to 27
Cavity Plates (K20 & K251) 27 to 36
Back Up Plate (K30) 17 to 76
Ejector Base Plates (K70 & K71) 17
Ejector Retainer Plates (K60 & K61) 9
Spacer Blocks (K40 & K41) 46 to 76
Stop Disc (Z551-1 & Z551-2) 3
156x296COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 22 to 27
Bottom Clamping Plates (K11, K13, & K16) 22 to 27
Cavity Plates (K20 & K251) 27 to 36
Back Up Plate (K30) 22 to 76
Ejector Base Plates (K70 & K71) 17
Ejector Retainer Plates (K60 & K61) 12
Spacer Blocks (K40 & K41) 46 to 76
Stop Disc (Z551-1 & Z551-2) 3
HASCO METRIC MOLD BASE ASSEMBLIES
20 - 6 Mold Base Library
190x246COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 17 to 27
Bottom Clamping Plates (K11, K13, & K16) 17 to 27
Cavity Plates (K20 & K251) 27 to 36
Back Up Plate (K30) 17 to 96
Ejector Base Plates (K70 & K71) 17
Ejector Retainer Plates (K60 & K61) 12
Spacer Blocks (K40 & K41) 46 to 76
Stop Disc (Z551-1 & Z551-2) 3
196x196COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 17 to 27
Bottom Clamping Plates (K11, K13, & K16) 17 to 27
Cavity Plates (K20 & K251) 27 to 36
Back Up Plate (K30) 17 to 96
Ejector Base Plates (K70 & K71) 17
Ejector Retainer Plates (K60 & K61) 12
Spacer Blocks (K40 & K41) 46 to 76
Stop Disc (Z551-1 & Z551-2) 3
196x296COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 17 to 36
Bottom Clamping Plates (K11, K13, & K16) 17 to 36
Cavity Plates (K20 & K251) 17 to 96
Back Up Plate (K30) 36
Ejector Base Plates (K70 & K71) 17
Ejector Retainer Plates (K60 & K61) 12
Spacer Blocks (K40 & K41) 56 to 96
Stop Disc (Z551-1 & Z551-2) 3
196x346COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 17 to 36
Bottom Clamping Plates (K11, K13, & K16) 17 to 36
Cavity Plates (K20 & K251) 17 to 96
Back Up Plate (K30) 36
Ejector Base Plates (K70 & K71) 17
Ejector Retainer Plates (K60 & K61) 12
Spacer Blocks (K40 & K41) 56 to 96
Stop Disc (Z551-1 & Z551-2) 3
HASCO METRIC MOLD BASE ASSEMBLIES
Mold Base Library 20 - 7
196x396COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 27 to 36
Bottom Clamping Plates (K11, K13, & K16) 27 to 36
Cavity Plates (K20 & K251) 27 to 96
Back Up Plate (K30) 36
Ejector Base Plates (K70 & K71) 22
Ejector Retainer Plates (K60 & K61) 17
Spacer Blocks (K40 & K41) 56 to 96
Stop Disc (Z551-1 & Z551-2) 3
218x246COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 17 to 27
Bottom Clamping Plates (K11, K13, & K16) 17 to 27
Cavity Plates (K20 & K251) 17 to 96
Back Up Plate (K30) 27 to 36
Ejector Base Plates (K70 & K71) 17
Ejector Retainer Plates (K60 & K61) 12
Spacer Blocks (K40 & K41) 46 to 76
Stop Disc (Z551-1 & Z551-2) 3
218x296COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 17 to 36
Bottom Clamping Plates (K11, K13, & K16) 17 to 36
Cavity Plates (K20 & K251) 17 to 96
Back Up Plate (K30) 27 to 36
Ejector Base Plates (K70 & K71) 17
Ejector Retainer Plates (K60 & K61) 12
Spacer Blocks (K40 & K41) 56 to 96
Stop Disc (Z551-1 & Z551-2) 3
246x246COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 17 to 36
Bottom Clamping Plates (K11, K13, & K16) 17 to 36
Cavity Plates (K20 & K251) 17 to 96
Back Up Plate (K30) 36
Ejector Base Plates (K70 & K71) 17
Ejector Retainer Plates (K60 & K61) 12
Spacer Blocks (K40 & K41) 56 to 96
Stop Disc (Z551-1 & Z551-2) 3
HASCO METRIC MOLD BASE ASSEMBLIES
20 - 8 Mold Base Library
246x296COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 17 to 36
Bottom Clamping Plates (K11, K13, & K16) 17 to 36
Cavity Plates (K20 & K251) 17 to 116
Back Up Plate (K30) 36
Ejector Base Plates (K70 & K71) 17
Ejector Retainer Plates (K60 & K61) 12
Spacer Blocks (K40 & K41) 56 to 96
Stop Disc (Z551-1 & Z551-2) 3
246x346COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 22 to 36
Bottom Clamping Plates (K11, K13, & K16) 22 to 36
Cavity Plates (K20 & K251) 22 to 116
Back Up Plate (K30) 36 to 46
Ejector Base Plates (K70 & K71) 22
Ejector Retainer Plates (K60 & K61) 17
Spacer Blocks (K40 & K41) 56 to 96
Stop Disc (Z551-1 & Z551-2) 3
246x396COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 22 to 36
Bottom Clamping Plates (K11, K13, & K16) 22 to 36
Cavity Plates (K20 & K251) 22 to 116
Back Up Plate (K30) 36 to 46
Ejector Base Plates (K70 & K71) 22
Ejector Retainer Plates (K60 & K61) 17
Spacer Blocks (K40 & K41) 56 to 96
Stop Disc (Z551-1 & Z551-2) 3
246x446COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 27 to 36
Bottom Clamping Plates (K11, K13, & K16) 27 to 36
Cavity Plates (K20 & K251) 27 to 116
Back Up Plate (K30) 36 to 46
Ejector Base Plates (K70 & K71) 22
Ejector Retainer Plates (K60 & K61) 17
Spacer Blocks (K40 & K41) 56 to 96
Stop Disc (Z551-1 & Z551-2) 3
HASCO METRIC MOLD BASE ASSEMBLIES
Mold Base Library 20 - 9
246x496COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 27 to 36
Bottom Clamping Plates (K11, K13, & K16) 27 to 36
Cavity Plates (K20 & K251) 27 to 116
Back Up Plate (K30) 36 to 46
Ejector Base Plates (K70 & K71) 22
Ejector Retainer Plates (K60 & K61) 17
Spacer Blocks (K40 & K41) 56 to 96
Stop Disc (Z551-1 & Z551-2) 3
296x296COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 22 to 36
Bottom Clamping Plates (K11, K13, & K16) 22 to 36
Cavity Plates (K20 & K251) 22 to 116
Back Up Plate (K30) 36 to 46
Ejector Base Plates (K70 & K71) 17
Ejector Retainer Plates (K60 & K61) 12
Spacer Blocks (K40 & K41) 56 to 96
Stop Disc (Z551-1 & Z551-2) 3
296x346COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 22 to 36
Bottom Clamping Plates (K11, K13, & K16) 22 to 36
Cavity Plates (K20 & K251) 22 to 116
Back Up Plate (K30) 36 to 46
Ejector Base Plates (K70 & K71) 22
Ejector Retainer Plates (K60 & K61) 17
Spacer Blocks (K40 & K41) 56 to 96
Stop Disc (Z551-1 & Z551-2) 3
296x396COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 22 to 36
Bottom Clamping Plates (K11, K13, & K16) 22 to 36
Cavity Plates (K20 & K251) 22 to 116
Back Up Plate (K30) 36 to 46
Ejector Base Plates (K70 & K71) 22
Ejector Retainer Plates (K60 & K61) 17
Spacer Blocks (K40 & K41) 56 to 96
Stop Disc (Z551-1 & Z551-2) 3
HASCO METRIC MOLD BASE ASSEMBLIES
20 - 10 Mold Base Library
296x446COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 27 to 36
Bottom Clamping Plates (K11, K13, & K16) 27 to 36
Cavity Plates (K20 & K251) 27 to 116
Back Up Plate (K30) 36 to 46
Ejector Base Plates (K70 & K71) 22
Ejector Retainer Plates (K60 & K61) 17
Spacer Blocks (K40 & K41) 56 to 96
Stop Disc (Z551-1 & Z551-2) 3
296x496COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 27 to 36
Bottom Clamping Plates (K11, K13, & K16) 27 to 36
Cavity Plates (K20 & K251) 27 to 116
Back Up Plate (K30) 36 to 46
Ejector Base Plates (K70 & K71) 22
Ejector Retainer Plates (K60 & K61) 17
Spacer Blocks (K40 & K41) 56 to 96
Stop Disc (Z551-1 & Z551-2) 3
296x546COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 27 to 36
Bottom Clamping Plates (K11, K13, & K16) 27 to 36
Cavity Plates (K20 & K251) 27 to 116
Back Up Plate (K30) 36 to 46
Ejector Base Plates (K70 & K71) 22
Ejector Retainer Plates (K60 & K61) 17
Spacer Blocks (K40 & K41) 56 to 96
Stop Disc (Z551-1 & Z551-2) 3
296x696COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 27 to 46
Bottom Clamping Plates (K11, K13, & K16) 27 to 46
Cavity Plates (K20 & K251) 27 to 116
Back Up Plate (K30) 36 to 46
Ejector Base Plates (K70 & K71) 27
Ejector Retainer Plates (K60 & K61) 22
Spacer Blocks (K40 & K41) 76 to 136
Stop Disc (Z551-1 & Z551-2) 3
HASCO METRIC MOLD BASE ASSEMBLIES
Mold Base Library 20 - 11
346x346COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 22 to 36
Bottom Clamping Plates (K11, K13, & K16) 22 to 36
Cavity Plates (K20 & K251) 22 to 116
Back Up Plate (K30) 36 to 46
Ejector Base Plates (K70 & K71) 22
Ejector Retainer Plates (K60 & K61) 17
Spacer Blocks (K40 & K41) 56 to 96
Stop Disc (Z551-1 & Z551-2) 3
346x396COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 22 to 46
Bottom Clamping Plates (K11, K13, & K16) 22 to 46
Cavity Plates (K20 & K251) 22 to 116
Back Up Plate (K30) 27 to 46
Ejector Base Plates (K70 & K71) 22
Ejector Retainer Plates (K60 & K61) 17
Spacer Blocks (K40 & K41) 56 to 96
Stop Disc (Z551-1 & Z551-2) 3
346x446COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 22 to 46
Bottom Clamping Plates (K11, K13, & K16) 22 to 46
Cavity Plates (K20 & K251) 27 to 116
Back Up Plate (K30) 27 to 46
Ejector Base Plates (K70 & K71) 22
Ejector Retainer Plates (K60 & K61) 17
Spacer Blocks (K40 & K41) 56 to 136
Stop Disc (Z551-1 & Z551-2) 3
346x496COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 22 to 46
Bottom Clamping Plates (K11, K13, & K16) 22 to 46
Cavity Plates (K20 & K251) 22 to 116
Back Up Plate (K30) 36 to 46
Ejector Base Plates (K70 & K71) 22
Ejector Retainer Plates (K60 & K61) 17
Spacer Blocks (K40 & K41) 56 to 136
Stop Disc (Z551-1 & Z551-2) 3
HASCO METRIC MOLD BASE ASSEMBLIES
20 - 12 Mold Base Library
346x546COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 27 to 46
Bottom Clamping Plates (K11, K13, & K16) 27 to 46
Cavity Plates (K20 & K251) 27 to 136
Back Up Plate (K30) 36 to 46
Ejector Base Plates (K70 & K71) 27
Ejector Retainer Plates (K60 & K61) 22
Spacer Blocks (K40 & K41) 66 to 136
Stop Disc (Z551-1 & Z551-2) 3
346x596COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 27 to 46
Bottom Clamping Plates (K11, K13, & K16) 27 to 46
Cavity Plates (K20 & K251) 27 to 136
Back Up Plate (K30) 36 to 46
Ejector Base Plates (K70 & K71) 27
Ejector Retainer Plates (K60 & K61) 22
Spacer Blocks (K40 & K41) 66 to 136
Stop Disc (Z551-1 & Z551-2) 3
346x696COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 27 to 46
Bottom Clamping Plates (K11, K13, & K16) 27 to 46
Cavity Plates (K20 & K251) 27 to 136
Back Up Plate (K30) 36 to 46
Ejector Base Plates (K70 & K71) 27
Ejector Retainer Plates (K60 & K61) 22
Spacer Blocks (K40 & K41) 76 to 136
Stop Disc (Z551-1 & Z551-2) 3
346x796COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) N/A
Bottom Clamping Plates (K11, K13, & K16) 36 to 56
Cavity Plates (K20 & K251) 36 to 156
Back Up Plate (K30) 36 to 56
Ejector Base Plates (K70 & K71) 27
Ejector Retainer Plates (K60 & K61) 22
Spacer Blocks (K40 & K41) 86 to 156
Stop Disc (Z551-1 & Z551-2) N/A
HASCO METRIC MOLD BASE ASSEMBLIES
Mold Base Library 20 - 13
396x396COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 22 to 46
Bottom Clamping Plates (K11, K13, & K16) 22 to 46
Cavity Plates (K20 & K251) 22 to 116
Back Up Plate (K30) 36 to 46
Ejector Base Plates (K70 & K71) 22
Ejector Retainer Plates (K60 & K61) 17
Spacer Blocks (K40 & K41) 56 to 116
Stop Disc (Z551-1 & Z551-2) 3
396x446COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 27 to 46
Bottom Clamping Plates (K11, K13, & K16) 27 to 46
Cavity Plates (K20 & K251) 27 to 116
Back Up Plate (K30) 36 to 46
Ejector Base Plates (K70 & K71) 22
Ejector Retainer Plates (K60 & K61) 17
Spacer Blocks (K40 & K41) 56 to 116
Stop Disc (Z551-1 & Z551-2) 3
396x496COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 27 to 46
Bottom Clamping Plates (K11, K13, & K16) 27 to 46
Cavity Plates (K20 & K251) 27 to 136
Back Up Plate (K30) 36 to 46
Ejector Base Plates (K70 & K71) 27
Ejector Retainer Plates (K60 & K61) 22
Spacer Blocks (K40 & K41) 66 to 136
Stop Disc (Z551-1 & Z551-2) 3
396x546COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 27 to 46
Bottom Clamping Plates (K11, K13, & K16) 27 to 46
Cavity Plates (K20 & K251) 27 to 136
Back Up Plate (K30) 46 to 56
Ejector Base Plates (K70 & K71) 27
Ejector Retainer Plates (K60 & K61) 17
Spacer Blocks (K40 & K41) 66 to 136
Stop Disc (Z551-1 & Z551-2) 3
HASCO METRIC MOLD BASE ASSEMBLIES
20 - 14 Mold Base Library
396x596COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 27 to 46
Bottom Clamping Plates (K11, K13, & K16) 27 to 46
Cavity Plates (K20 & K251) 27 to 136
Back Up Plate (K30) 46 to 56
Ejector Base Plates (K70 & K71) 27
Ejector Retainer Plates (K60 & K61) 22
Spacer Blocks (K40 & K41) 66 to 136
Stop Disc (Z551-1 & Z551-2) 3
396x696COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 36 to 56
Bottom Clamping Plates (K11, K13, & K16) 36 to 56
Cavity Plates (K20 & K251) 36 to 156
Back Up Plate (K30) 46 to 56
Ejector Base Plates (K70 & K71) 36
Ejector Retainer Plates (K60 & K61) 27
Spacer Blocks (K40 & K41) 76 to 136
Stop Disc (Z551-1 & Z551-2) 3
396x796COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 36 to 56
Bottom Clamping Plates (K11, K13, & K16) 36 to 56
Cavity Plates (K20 & K251) 36 to 156
Back Up Plate (K30) 46 to 56
Ejector Base Plates (K70 & K71) 36
Ejector Retainer Plates (K60 & K61) 27
Spacer Blocks (K40 & K41) 86 to 156
Stop Disc (Z551-1 & Z551-2) N/A
396x896COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 36 to 56
Bottom Clamping Plates (K11, K13, & K16) 36 to 56
Cavity Plates (K20 & K251) 36 to 156
Back Up Plate (K30) 46 to 56
Ejector Base Plates (K70 & K71) 36
Ejector Retainer Plates (K60 & K61) 27
Spacer Blocks (K40 & K41) 86 to 156
Stop Disc (Z551-1 & Z551-2) N/A
HASCO METRIC MOLD BASE ASSEMBLIES
Mold Base Library 20 - 15
446x446COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 27 to 46
Bottom Clamping Plates (K11, K13, & K16) 27 to 46
Cavity Plates (K20 & K251) 27 to 116
Back Up Plate (K30) 36 to 46
Ejector Base Plates (K70 & K71) 27
Ejector Retainer Plates (K60 & K61) 17
Spacer Blocks (K40 & K41) 56 to 116
Stop Disc (Z551-1 & Z551-2) 3
446x496COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 27 to 46
Bottom Clamping Plates (K11, K13, & K16) 27 to 46
Cavity Plates (K20 & K251) 27 to 136
Back Up Plate (K30) 46 to 56
Ejector Base Plates (K70 & K71) 27
Ejector Retainer Plates (K60 & K61) 22
Spacer Blocks (K40 & K41) 66 to 136
Stop Disc (Z551-1 & Z551-2) 3
446x546COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 27 to 46
Bottom Clamping Plates (K11, K13, & K16) 27 to 46
Cavity Plates (K20 & K251) 27 to 136
Back Up Plate (K30) 46 to 56
Ejector Base Plates (K70 & K71) 27
Ejector Retainer Plates (K60 & K61) 22
Spacer Blocks (K40 & K41) 66 to 136
Stop Disc (Z551-1 & Z551-2) 3
446x596COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 27 to 46
Bottom Clamping Plates (K11, K13, & K16) 27 to 46
Cavity Plates (K20 & K251) 27 to 136
Back Up Plate (K30) 46 to 56
Ejector Base Plates (K70 & K71) 27
Ejector Retainer Plates (K60 & K61) 22
Spacer Blocks (K40 & K41) 66 to 136
Stop Disc (Z551-1 & Z551-2) 3
HASCO METRIC MOLD BASE ASSEMBLIES
20 - 16 Mold Base Library
446x696COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 36 to 56
Bottom Clamping Plates (K11, K13, & K16) 36 to 56
Cavity Plates (K20 & K251) 36 to 156
Back Up Plate (K30) 46 to 56
Ejector Base Plates (K70 & K71) 36
Ejector Retainer Plates (K60 & K61) 27
Spacer Blocks (K40 & K41) 76 to 136
Stop Disc (Z551-1 & Z551-2) 3
446x796COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 36 to 56
Bottom Clamping Plates (K11, K13, & K16) 36 to 56
Cavity Plates (K20 & K251) 36 to 156
Back Up Plate (K30) 46 to 56
Ejector Base Plates (K70 & K71) 36
Ejector Retainer Plates (K60 & K61) 27
Spacer Blocks (K40 & K41) 86 to 156
Stop Disc (Z551-1 & Z551-2) N/A
446x896COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 36 to 56
Bottom Clamping Plates (K11, K13, & K16) 36 to 56
Cavity Plates (K20 & K251) 36 to 156
Back Up Plate (K30) 46 to 56
Ejector Base Plates (K70 & K71) 36
Ejector Retainer Plates (K60 & K61) 27
Spacer Blocks (K40 & K41) 86 to 156
Stop Disc (Z551-1 & Z551-2) N/A
496x496COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 27 to 56
Bottom Clamping Plates (K11, K13, & K16) 27 to 56
Cavity Plates (K20 & K251) 27 to 156
Back Up Plate (K30) 46 to 56
Ejector Base Plates (K70 & K71) 36
Ejector Retainer Plates (K60 & K61) 27
Spacer Blocks (K40 & K41) 66 to 136
Stop Disc (Z551-1 & Z551-2) 3
HASCO METRIC MOLD BASE ASSEMBLIES
Mold Base Library 20 - 17
496x546COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 27 to 56
Bottom Clamping Plates (K11, K13, & K16) 27 to 56
Cavity Plates (K20 & K251) 27 to 156
Back Up Plate (K30) 46 to 56
Ejector Base Plates (K70 & K71) 36
Ejector Retainer Plates (K60 & K61) 27
Spacer Blocks (K40 & K41) 66 to 136
Stop Disc (Z551-1 & Z551-2) 3
496x596COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 36 to 56
Bottom Clamping Plates (K11, K13, & K16) 36 to 56
Cavity Plates (K20 & K251) 36 to 156
Back Up Plate (K30) 46 to 56
Ejector Base Plates (K70 & K71) 36
Ejector Retainer Plates (K60 & K61) 27
Spacer Blocks (K40 & K41) 76 to 136
Stop Disc (Z551-1 & Z551-2) 3
496x696COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 36 to 56
Bottom Clamping Plates (K11, K13, & K16) 36 to 56
Cavity Plates (K20 & K251) 36 to 156
Back Up Plate (K30) 46 to 56
Ejector Base Plates (K70 & K71) 36
Ejector Retainer Plates (K60 & K61) 27
Spacer Blocks (K40 & K41) 76 to 136
Stop Disc (Z551-1 & Z551-2) 3
496x796COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 46 to 56
Bottom Clamping Plates (K11, K13, & K16) 46 to 56
Cavity Plates (K20 & K251) 56 to 196
Back Up Plate (K30) 56 to 76
Ejector Base Plates (K70 & K71) 36
Ejector Retainer Plates (K60 & K61) 27
Spacer Blocks (K40 & K41) 96 to 156
Stop Disc (Z551-1 & Z551-2) N/A
HASCO METRIC MOLD BASE ASSEMBLIES
20 - 18 Mold Base Library
496x896COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 46 to 56
Bottom Clamping Plates (K11, K13, & K16) 46 to 56
Cavity Plates (K20 & K251) 56 to 196
Back Up Plate (K30) 56 to 76
Ejector Base Plates (K70 & K71) 36
Ejector Retainer Plates (K60 & K61) 27
Spacer Blocks (K40 & K41) 96 to 156
Stop Disc (Z551-1 & Z551-2) N/A
496x996COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 46 to 56
Bottom Clamping Plates (K11, K13, & K16) 46 to 56
Cavity Plates (K20 & K251) 56 to 196
Back Up Plate (K30) 56 to 76
Ejector Base Plates (K70 & K71) 36
Ejector Retainer Plates (K60 & K61) 27
Spacer Blocks (K40 & K41) 96 to 156
Stop Disc (Z551-1 & Z551-2) N/A
546x546COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 36 to 56
Bottom Clamping Plates (K11, K13, & K16) 36 to 56
Cavity Plates (K20 & K251) 36 to 156
Back Up Plate (K30) 46 to 56
Ejector Base Plates (K70 & K71) 36
Ejector Retainer Plates (K60 & K61) 27
Spacer Blocks (K40 & K41) 76 to 136
Stop Disc (Z551-1 & Z551-2) 3
546x596COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 36 to 56
Bottom Clamping Plates (K11, K13, & K16) 36 to 56
Cavity Plates (K20 & K251) 36 to 156
Back Up Plate (K30) 46 to 56
Ejector Base Plates (K70 & K71) 36
Ejector Retainer Plates (K60 & K61) 27
Spacer Blocks (K40 & K41) 76 to 136
Stop Disc (Z551-1 & Z551-2) 3
HASCO METRIC MOLD BASE ASSEMBLIES
Mold Base Library 20 - 19
546x696COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 36 to 56
Bottom Clamping Plates (K11, K13, & K16) 36 to 56
Cavity Plates (K20 & K251) 36 to 156
Back Up Plate (K30) 46 to 56
Ejector Base Plates (K70 & K71) 36
Ejector Retainer Plates (K60 & K61) 27
Spacer Blocks (K40 & K41) 76 to 136
Stop Disc (Z551-1 & Z551-2) 3
546x796COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 56
Bottom Clamping Plates (K11, K13, & K16) 56
Cavity Plates (K20 & K251) 56 to 196
Back Up Plate (K30) 56 to 76
Ejector Base Plates (K70 & K71) 36
Ejector Retainer Plates (K60 & K61) 27
Spacer Blocks (K40 & K41) 96 to 156
Stop Disc (Z551-1 & Z551-2) N/A
546x896COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 56
Bottom Clamping Plates (K11, K13, & K16) 56
Cavity Plates (K20 & K251) 56 to 196
Back Up Plate (K30) 56 to 76
Ejector Base Plates (K70 & K71) 36
Ejector Retainer Plates (K60 & K61) 27
Spacer Blocks (K40 & K41) 96 to 156
Stop Disc (Z551-1 & Z551-2) N/A
546x996COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 56
Bottom Clamping Plates (K11, K13, & K16) 56
Cavity Plates (K20 & K251) 56 to 196
Back Up Plate (K30) 56 to 76
Ejector Base Plates (K70 & K71) 36
Ejector Retainer Plates (K60 & K61) 27
Spacer Blocks (K40 & K41) 96 to 156
Stop Disc (Z551-1 & Z551-2) N/A
HASCO METRIC MOLD BASE ASSEMBLIES
20 - 20 Mold Base Library
596x596COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 36 to 56
Bottom Clamping Plates (K11, K13, & K16) 36 to 56
Cavity Plates (K20 & K251) 36 to 156
Back Up Plate (K30) 46 to 56
Ejector Base Plates (K70 & K71) 36
Ejector Retainer Plates (K60 & K61) 27
Spacer Blocks (K40 & K41) 76 to 136
Stop Disc (Z551-1 & Z551-2) 3
596x696COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 56
Bottom Clamping Plates (K11, K13, & K16) 56
Cavity Plates (K20 & K251) 56 to 196
Back Up Plate (K30) 56 to 76
Ejector Base Plates (K70 & K71) 36
Ejector Retainer Plates (K60 & K61) 27
Spacer Blocks (K40 & K41) 96 to 156
596x796COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 56
Bottom Clamping Plates (K11, K13, & K16) 56
Cavity Plates (K20 & K251) 56 to 196
Back Up Plate (K30) 56 to 76
Ejector Base Plates (K70 & K71) 36
Ejector Retainer Plates (K60 & K61) 27
Spacer Blocks (K40 & K41) 96 to 156
Stop Disc (Z551-1 & Z551-2) N/A
596x896COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 56
Bottom Clamping Plates (K11, K13, & K16) 56
Cavity Plates (K20 & K251) 56 to 196
Back Up Plate (K30) 56 to 76
Ejector Base Plates (K70 & K71) 36
Ejector Retainer Plates (K60 & K61) 27
Spacer Blocks (K40 & K41) 96 to 156
Stop Disc (Z551-1 & Z551-2) N/A
HASCO METRIC MOLD BASE ASSEMBLIES
Mold Base Library 20 - 21
596x996COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 56
Bottom Clamping Plates (K11, K13, & K16) 56
Cavity Plates (K20 & K251) 56 to 196
Back Up Plate (K30) 56 to 76
Ejector Base Plates (K70 & K71) 36
Ejector Retainer Plates (K60 & K61) 27
Spacer Blocks (K40 & K41) 96 to 156
Stop Disc (Z551-1 & Z551-2) N/A
696x696COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 56 to 76
Bottom Clamping Plates (K11, K13, & K16) 56 to 76
Cavity Plates (K20 & K251) 56 to 196
Back Up Plate (K30) 56 to 76
Ejector Base Plates (K70 & K71) 36
Ejector Retainer Plates (K60 & K61) 27
Spacer Blocks (K40 & K41) 96 to 156
Stop Disc (Z551-1 & Z551-2) N/A
696x796COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 56 to 76
Bottom Clamping Plates (K11, K13, & K16) 56 to 76
Cavity Plates (K20 & K251) 56 to 196
Back Up Plate (K30) 56 to 76
Ejector Base Plates (K70 & K71) 36
Ejector Retainer Plates (K60 & K61) 27
Spacer Blocks (K40 & K41) 96 to 156
Stop Disc (Z551-1 & Z551-2) N/A
696x896COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 56 to 76
Bottom Clamping Plates (K11, K13, & K16) 56 to 76
Cavity Plates (K20 & K251) 56 to 196
Back Up Plate (K30) 56 to 76
Ejector Base Plates (K70 & K71) 36
Ejector Retainer Plates (K60 & K61) 27
Spacer Blocks (K40 & K41) 96 to 156
Stop Disc (Z551-1 & Z551-2)
696x996COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 56 to 76
Bottom Clamping Plates (K11, K13, & K16) 56 to 76
Cavity Plates (K20 & K251) 56 to 196
Back Up Plate (K30) 56 to 76
Ejector Base Plates (K70 & K71) 36
Ejector Retainer Plates (K60 & K61) 27
Spacer Blocks (K40 & K41) 96 to 156
Stop Disc (Z551-1 & Z551-2) N/A
796x796COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 56 to 76
Bottom Clamping Plates (K11, K13, & K16) 56 to 76
Cavity Plates (K20 & K251) 56 to 196
Back Up Plate (K30) 56 to 76
Ejector Base Plates (K70 & K71) 36
Ejector Retainer Plates (K60 & K61) 27
Spacer Blocks (K40 & K41) 96 to 156
Stop Disc (Z551-1 & Z551-2) N/A
796x896COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 56 to 76
Bottom Clamping Plates (K11, K13, & K16) 56 to 76
Cavity Plates (K20 & K251) 56 to 196
Back Up Plate (K30) 56 to 76
Ejector Base Plates (K70 & K71) 36
Ejector Retainer Plates (K60 & K61) 27
Spacer Blocks (K40 & K41) 96 to 156
Stop Disc (Z551-1 & Z551-2) N/A
796x996COMPONENT THICKNESS
Top Clamping Plates(K10, K12, & K15) 56 to 76
Bottom Clamping Plates (K11, K13, & K16) 56 to 76
Cavity Plates (K20 & K251) 56 to 196
Back Up Plate (K30) 56 to 76
Ejector Base Plates (K70 & K71) 36
Ejector Retainer Plates (K60 & K61) 27
Spacer Blocks (K40 & K41) 96 to 156
Stop Disc (Z551-1 & Z551-2) N/A
Mold Base Library 21 - 1
9HASCO METRIC PINS
PIN, CATALOG NO. Z00
Generic Part Name: Z00
InstanceName
d_3d_4HeadDia.
l1 f k S2d_1
Pin Dia.L
Length
Z00_01 14.0000 16.0000 4.0000 3.0000 3.0000 12-56 9-10 25-60
Z00_02 20.0000 25.0000 7.0000 9.0000 6.0000 17-116 14-15 35-150
Z00_03 26.0000 31.0000 7.0000 9.0000 6.0000 17-136 18-20 35-245
Z00_04 30.0000 35.0000 7.0000 9.0000 6.0000 17-156 22-24 35-285
Z00_05 42.0000 47.0000 7.0000 9.0000 6.0000 27-196 30-32 45-295
Z00_06 54.0000 60.0000 7.0000 9.0000 6.0000 46-246 40-42 95-245
HASCO METRIC PINS
21 - 2 Mold Base Library
PIN, CATALOG NO. Z03
Generic Part Name: Z03
InstanceName
d_3d_4
Head Dia.l1 k S2
d_1Pin Dia.
LLength
Z03_01 14.0000 16.0000 4.0000 3.0000 17-46 9-10 20-45
Z03_02 20.0000 25.0000 7.0000 6.0000 22-86 14-15 20-110
Z03_03 26.0000 31.0000 7.0000 6.0000 22-116 18-20 20-135
Z03_04 30.0000 35.0000 7.0000 6.0000 27-136 22-24 25-165
Z03_05 42.0000 47.0000 7.0000 6.0000 27-196 30-32 45-195
Z03_06 54.0000 60.0000 7.0000 10.0000 56-196 40-42 75-235
Z03_07 66.0000 72.0000 10.0000 10.0000 96-196 50 115-175
Z03_08 80.0000 86.0000 10.0000 20.0000 96-246 60 115-195
HASCO METRIC PINS
Mold Base Library 21 - 3
PIN, CATALOG NO. Z40
Generic Part Name: Z40
InstanceName
d_1Pin Diameter
l1Total
Length
d_2Head
Diameter
kHead
Thicknessr
Z40_010 1.6000 40.0000 3.0000 1.5000 0.3000
Z40_011 1.6000 60.0000 3.0000 1.5000 0.3000
Z40_012 1.6000 80.0000 3.0000 1.5000 0.3000
Z40_013 1.6000 100.0000 3.0000 1.5000 0.3000
Z40_014 1.6000 125.0000 3.0000 1.5000 0.3000
Z40_015 1.6000 160.0000 3.0000 1.5000 0.3000
Z40_016 1.6000 200.0000 3.0000 1.5000 0.3000
Z40_017 2.0000 40.0000 4.0000 2.0000 0.3000
Z40_018 2.0000 60.0000 4.0000 2.0000 0.3000
Z40_019 2.0000 80.0000 4.0000 2.0000 0.3000
Z40_020 2.0000 100.0000 4.0000 2.0000 0.3000
Z40_021 2.0000 125.0000 4.0000 2.0000 0.3000
Z40_022 2.0000 160.0000 4.0000 2.0000 0.3000
Z40_023 2.0000 200.0000 4.0000 2.0000 0.3000
Z40_024 2.0000 250.0000 4.0000 2.0000 0.3000
Z40_025 2.2000 100.0000 4.0000 2.0000 0.3000
Z40_026 2.2000 125.0000 4.0000 2.0000 0.3000
Z40_027 2.2000 160.0000 4.0000 2.0000 0.3000
HASCO METRIC PINS
21 - 4 Mold Base Library
Z40_028 2.2000 200.0000 4.0000 2.0000 0.3000
Z40_029 2.2000 250.0000 4.0000 2.0000 0.3000
Z40_030 2.5000 40.0000 5.0000 2.0000 0.3000
Z40_031 2.5000 60.0000 5.0000 2.0000 0.3000
Z40_032 2.5000 80.0000 5.0000 2.0000 0.3000
Z40_033 2.5000 100.0000 5.0000 2.0000 0.3000
Z40_034 2.5000 125.0000 5.0000 2.0000 0.3000
Z40_035 2.5000 160.0000 5.0000 2.0000 0.3000
Z40_036 2.5000 200.0000 5.0000 2.0000 0.3000
Z40_037 2.5000 250.0000 5.0000 2.0000 0.3000
Z40_038 3.0000 40.0000 6.0000 3.0000 0.3000
Z40_039 3.0000 60.0000 6.0000 3.0000 0.3000
Z40_040 3.0000 80.0000 6.0000 3.0000 0.3000
Z40_041 3.0000 100.0000 6.0000 3.0000 0.3000
Z40_042 3.0000 125.0000 6.0000 3.0000 0.3000
Z40_043 3.0000 160.0000 6.0000 3.0000 0.3000
Z40_044 3.0000 200.0000 6.0000 3.0000 0.3000
Z40_045 3.0000 250.0000 6.0000 3.0000 0.3000
Z40_046 3.2000 100.0000 6.0000 3.0000 0.3000
Z40_047 3.2000 125.0000 6.0000 3.0000 0.3000
Z40_048 3.2000 160.0000 6.0000 3.0000 0.3000
Z40_049 3.2000 200.0000 6.0000 3.0000 0.3000
Z40_050 3.2000 250.0000 6.0000 3.0000 0.3000
Z40_051 3.5000 100.0000 7.0000 3.0000 0.3000
Z40_052 3.5000 125.0000 7.0000 3.0000 0.3000
Z40_053 3.5000 160.0000 7.0000 3.0000 0.3000
Z40_054 3.5000 200.0000 7.0000 3.0000 0.3000
Z40_055 3.5000 250.0000 7.0000 3.0000 0.3000
Z40_056 3.7000 100.0000 7.0000 3.0000 0.3000
Z40_057 3.7000 125.0000 7.0000 3.0000 0.3000
InstanceName
d_1Pin Diameter
l1Total
Length
d_2Head
Diameter
kHead
Thicknessr
HASCO METRIC PINS
Mold Base Library 21 - 5
Z40_058 3.7000 160.0000 7.0000 3.0000 0.3000
Z40_059 3.7000 200.0000 7.0000 3.0000 0.3000
Z40_060 3.7000 250.0000 7.0000 3.0000 0.3000
Z40_061 4.0000 40.0000 8.0000 3.0000 0.3000
Z40_062 4.0000 60.0000 8.0000 3.0000 0.3000
Z40_063 4.0000 80.0000 8.0000 3.0000 0.3000
Z40_064 4.0000 100.0000 8.0000 3.0000 0.3000
Z40_065 4.0000 125.0000 8.0000 3.0000 0.3000
Z40_066 4.0000 160.0000 8.0000 3.0000 0.3000
Z40_067 4.0000 200.0000 8.0000 3.0000 0.3000
Z40_068 4.0000 250.0000 8.0000 3.0000 0.3000
Z40_069 4.0000 315.0000 8.0000 3.0000 0.3000
Z40_070 4.2000 100.0000 8.0000 3.0000 0.3000
Z40_071 4.2000 125.0000 8.0000 3.0000 0.3000
Z40_072 4.2000 160.0000 8.0000 3.0000 0.3000
Z40_073 4.2000 200.0000 8.0000 3.0000 0.3000
Z40_074 4.2000 250.0000 8.0000 3.0000 0.3000
Z40_075 4.2000 315.0000 8.0000 3.0000 0.3000
Z40_076 4.5000 100.0000 8.0000 3.0000 0.3000
Z40_077 4.5000 125.0000 8.0000 3.0000 0.3000
Z40_078 4.5000 160.0000 8.0000 3.0000 0.3000
Z40_079 4.5000 200.0000 8.0000 3.0000 0.3000
Z40_080 5.0000 40.0000 10.0000 3.0000 0.3000
Z40_081 5.0000 60.0000 10.0000 3.0000 0.3000
Z40_082 5.0000 80.0000 10.0000 3.0000 0.3000
Z40_083 5.0000 100.0000 10.0000 3.0000 0.3000
Z40_084 5.0000 125.0000 10.0000 3.0000 0.3000
Z40_085 5.0000 160.0000 10.0000 3.0000 0.3000
Z40_086 5.0000 200.0000 10.0000 3.0000 0.3000
Z40_087 5.0000 250.0000 10.0000 3.0000 0.3000
InstanceName
d_1Pin Diameter
l1Total
Length
d_2Head
Diameter
kHead
Thicknessr
HASCO METRIC PINS
21 - 6 Mold Base Library
Z40_088 5.0000 315.0000 10.0000 3.0000 0.3000
Z40_089 5.2000 100.0000 10.0000 3.0000 0.3000
Z40_090 5.2000 125.0000 10.0000 3.0000 0.3000
Z40_091 5.2000 160.0000 10.0000 3.0000 0.3000
Z40_092 5.2000 200.0000 10.0000 3.0000 0.3000
Z40_093 5.2000 250.0000 10.0000 3.0000 0.3000
Z40_094 5.2000 315.0000 10.0000 3.0000 0.3000
Z40_095 5.5000 100.0000 10.0000 3.0000 0.3000
Z40_096 5.5000 125.0000 10.0000 3.0000 0.3000
Z40_097 5.5000 160.0000 10.0000 3.0000 0.3000
Z40_098 5.5000 200.0000 10.0000 3.0000 0.3000
Z40_099 6.0000 40.0000 12.0000 5.0000 0.5000
Z40_100 6.0000 60.0000 12.0000 5.0000 0.5000
Z40_101 6.0000 80.0000 12.0000 5.0000 0.5000
Z40_102 6.0000 100.0000 12.0000 5.0000 0.5000
Z40_103 6.0000 125.0000 12.0000 5.0000 0.5000
Z40_104 6.0000 160.0000 12.0000 5.0000 0.5000
Z40_105 6.0000 200.0000 12.0000 5.0000 0.5000
Z40_106 6.0000 250.0000 12.0000 5.0000 0.5000
Z40_107 6.0000 315.0000 12.0000 5.0000 0.5000
Z40_108 6.2000 100.0000 12.0000 5.0000 0.5000
Z40_109 6.2000 125.0000 12.0000 5.0000 0.5000
Z40_110 6.2000 160.0000 12.0000 5.0000 0.5000
Z40_111 6.2000 200.0000 12.0000 5.0000 0.5000
Z40_112 6.2000 250.0000 12.0000 5.0000 0.5000
Z40_113 6.2000 315.0000 12.0000 5.0000 0.5000
Z40_114 6.5000 100.0000 12.0000 5.0000 0.5000
Z40_115 6.5000 125.0000 12.0000 5.0000 0.5000
Z40_116 6.5000 160.0000 12.0000 5.0000 0.5000
Z40_117 6.5000 200.0000 12.0000 5.0000 0.5000
InstanceName
d_1Pin Diameter
l1Total
Length
d_2Head
Diameter
kHead
Thicknessr
HASCO METRIC PINS
Mold Base Library 21 - 7
Z40_118 6.5000 250.0000 12.0000 5.0000 0.5000
Z40_119 7.0000 100.0000 12.0000 5.0000 0.5000
Z40_120 7.0000 125.0000 12.0000 5.0000 0.5000
Z40_121 7.0000 160.0000 12.0000 5.0000 0.5000
Z40_122 7.0000 200.0000 12.0000 5.0000 0.5000
Z40_123 7.0000 250.0000 12.0000 5.0000 0.5000
Z40_124 8.0000 60.0000 14.0000 5.0000 0.5000
Z40_125 8.0000 80.0000 14.0000 5.0000 0.5000
Z40_126 8.0000 100.0000 14.0000 5.0000 0.5000
Z40_127 8.0000 125.0000 14.0000 5.0000 0.5000
Z40_128 8.0000 160.0000 14.0000 5.0000 0.5000
Z40_129 8.0000 200.0000 14.0000 5.0000 0.5000
Z40_130 8.0000 250.0000 14.0000 5.0000 0.5000
Z40_131 8.0000 315.0000 14.0000 5.0000 0.5000
Z40_132 8.2000 100.0000 14.0000 5.0000 0.5000
Z40_133 8.2000 125.0000 14.0000 5.0000 0.5000
Z40_134 8.2000 160.0000 14.0000 5.0000 0.5000
Z40_135 8.2000 200.0000 14.0000 5.0000 0.5000
Z40_136 8.2000 250.0000 14.0000 5.0000 0.5000
Z40_137 8.2000 315.0000 14.0000 5.0000 0.5000
Z40_138 10.0000 80.0000 16.0000 5.0000 0.5000
Z40_139 10.0000 100.0000 16.0000 5.0000 0.5000
Z40_140 10.0000 125.0000 16.0000 5.0000 0.5000
Z40_141 10.0000 160.0000 16.0000 5.0000 0.5000
Z40_142 10.0000 200.0000 16.0000 5.0000 0.5000
Z40_143 10.0000 250.0000 16.0000 5.0000 0.5000
Z40_144 10.0000 315.0000 16.0000 5.0000 0.5000
Z40_145 10.2000 125.0000 16.0000 5.0000 0.5000
Z40_146 10.2000 160.0000 16.0000 5.0000 0.5000
Z40_147 10.2000 200.0000 16.0000 5.0000 0.5000
InstanceName
d_1Pin Diameter
l1Total
Length
d_2Head
Diameter
kHead
Thicknessr
HASCO METRIC PINS
21 - 8 Mold Base Library
Z40_148 10.2000 250.0000 16.0000 5.0000 0.5000
Z40_149 10.2000 315.0000 16.0000 5.0000 0.5000
Z40_150 10.5000 100.0000 16.0000 5.0000 0.5000
Z40_151 10.5000 125.0000 16.0000 5.0000 0.5000
Z40_152 10.5000 160.0000 16.0000 5.0000 0.5000
Z40_153 10.5000 200.0000 16.0000 5.0000 0.5000
Z40_154 10.5000 250.0000 16.0000 5.0000 0.5000
Z40_155 10.5000 315.0000 16.0000 5.0000 0.5000
Z40_156 12.0000 80.0000 20.0000 7.0000 0.8000
Z40_157 12.0000 100.0000 20.0000 7.0000 0.8000
Z40_158 12.0000 125.0000 20.0000 7.0000 0.8000
Z40_159 12.0000 160.0000 20.0000 7.0000 0.8000
Z40_160 12.0000 200.0000 20.0000 7.0000 0.8000
Z40_161 12.0000 250.0000 20.0000 7.0000 0.8000
Z40_162 12.0000 315.0000 20.0000 7.0000 0.8000
Z40_163 12.5000 100.0000 18.0000 7.0000 0.8000
Z40_164 12.5000 125.0000 18.0000 7.0000 0.8000
Z40_165 12.5000 160.0000 18.0000 7.0000 0.8000
Z40_166 12.5000 200.0000 18.0000 7.0000 0.8000
Z40_167 12.5000 250.0000 18.0000 7.0000 0.8000
Z40_168 12.5000 315.0000 18.0000 7.0000 0.8000
Z40_169 14.0000 100.0000 22.0000 7.0000 0.8000
Z40_170 14.0000 125.0000 22.0000 7.0000 0.8000
Z40_171 14.0000 160.0000 22.0000 7.0000 0.8000
Z40_172 14.0000 200.0000 22.0000 7.0000 0.8000
Z40_173 14.0000 250.0000 22.0000 7.0000 0.8000
Z40_174 14.0000 315.0000 22.0000 7.0000 0.8000
Z40_175 16.0000 100.0000 22.0000 7.0000 0.8000
Z40_176 16.0000 125.0000 22.0000 7.0000 0.8000
Z40_177 16.0000 160.0000 22.0000 7.0000 0.8000
InstanceName
d_1Pin Diameter
l1Total
Length
d_2Head
Diameter
kHead
Thicknessr
HASCO METRIC PINS
Mold Base Library 21 - 9
Z40_178 16.0000 200.0000 22.0000 7.0000 0.8000
Z40_179 16.0000 250.0000 22.0000 7.0000 0.8000
Z40_180 16.0000 315.0000 22.0000 7.0000 0.8000
InstanceName
d_1Pin Diameter
l1Total
Length
d_2Head
Diameter
kHead
Thicknessr
HASCO METRIC PINS
21 - 10 Mold Base Library
PIN, CATALOG NO. Z49
Generic Part Name: Z49
InstanceName
d_1Pin
Diameter
l1Total
Length
d_2Head
Diameterd_3 t1 k
Z49_010 3.0000 63.0000 6.0000 4.0000 5.0000 10.0000
Z49_011 3.0000 125.0000 6.0000 4.0000 5.0000 10.0000
Z49_012 3.5000 63.0000 6.0000 4.0000 5.0000 10.0000
Z49_013 3.5000 125.0000 6.0000 4.0000 5.0000 10.0000
Z49_014 4.0000 63.0000 8.0000 5.0000 7.0000 12.0000
Z49_015 4.0000 125.0000 8.0000 5.0000 7.0000 12.0000
Z49_016 4.5000 63.0000 8.0000 5.0000 7.0000 12.0000
Z49_017 4.5000 125.0000 8.0000 5.0000 7.0000 12.0000
Z49_018 5.0000 80.0000 9.0000 6.0000 9.0000 14.0000
Z49_019 5.0000 160.0000 9.0000 6.0000 9.0000 14.0000
Z49_020 5.5000 80.0000 9.0000 6.0000 9.0000 14.0000
Z49_021 5.5000 160.0000 9.0000 6.0000 9.0000 14.0000
Z49_022 6.0000 80.0000 10.0000 6.0000 9.0000 14.0000
Z49_023 6.0000 160.0000 10.0000 6.0000 9.0000 14.0000
Z49_024 6.5000 80.0000 10.0000 6.0000 9.0000 14.0000
Z49_025 6.5000 160.0000 10.0000 6.0000 9.0000 14.0000
Z49_026 8.0000 80.0000 13.0000 8.0000 10.0000 16.0000
Z49_027 8.0000 160.0000 13.0000 8.0000 10.0000 16.0000
Z49_028 8.5000 80.0000 13.0000 8.0000 10.0000 16.0000
HASCO METRIC PINS
Mold Base Library 21 - 11
Z49_029 8.5000 160.0000 13.0000 8.0000 10.0000 16.0000
Z49_030 10.0000 100.0000 15.0000 10.0000 12.0000 18.0000
Z49_031 10.0000 200.0000 15.0000 10.0000 12.0000 18.0000
Z49_032 10.5000 100.0000 15.0000 10.0000 12.0000 18.0000
Z49_033 10.5000 200.0000 15.0000 10.0000 12.0000 18.0000
Z49_034 12.0000 100.0000 18.0000 12.0000 14.0000 22.0000
Z49_035 12.0000 200.0000 18.0000 12.0000 14.0000 22.0000
Z49_036 12.5000 100.0000 18.0000 12.0000 14.0000 22.0000
Z49_037 12.5000 200.0000 18.0000 12.0000 14.0000 22.0000
Z49_038 14.0000 100.0000 20.0000 12.0000 14.0000 22.0000
Z49_039 14.0000 200.0000 20.0000 12.0000 14.0000 22.0000
Z49_040 14.5000 100.0000 20.0000 12.0000 14.0000 22.0000
Z49_041 14.5000 200.0000 20.0000 12.0000 14.0000 22.0000
Z49_042 16.0000 100.0000 22.0000 16.0000 18.0000 25.0000
Z49_043 16.0000 200.0000 22.0000 16.0000 18.0000 25.0000
Z49_044 16.5000 100.0000 22.0000 16.0000 18.0000 25.0000
Z49_045 16.5000 200.0000 22.0000 16.0000 18.0000 25.0000
InstanceName
d_1Pin
Diameter
l1Total
Length
d_2Head
Diameterd_3 t1 k
Mold Base Library 22 - 1
10HASCO METRIC LOCATING RINGS
LOCATING RING, CATALOG NO. K100
Generic Part Name: K100
Notes
1. “*” denotes a non-existent value.
InstanceName
D H d1 h1
K100_010 60.0000 8.0000 36.0000 4.0000
K100_011 80.0000 8.0000 36.0000 4.0000
K100_012 90.0000 8.0000 36.0000 *
K100_013 100.0000 8.0000 36.0000 4.0000
K100_014 110.0000 8.0000 36.0000 4.0000
K100_015 110.0000 12.0000 36.0000 4.0000
K100_016 120.0000 8.0000 36.0000 4.0000
K100_017 120.0000 12.0000 36.0000 4.0000
K100_018 125.0000 8.0000 36.0000 4.0000
K100_019 125.0000 12.0000 36.0000 4.0000
K100_020 130.0000 12.0000 36.0000 4.0000
K100_021 140.0000 12.0000 36.0000 4.0000
K100_022 150.0000 12.0000 36.0000 4.0000
HASCO METRIC LOCATING RINGS
22 - 2 Mold Base Library
K100_023 160.0000 8.0000 36.0000 4.0000
K100_024 160.0000 12.0000 36.0000 4.0000
K100_025 175.0000 8.0000 36.0000 4.0000
K100_026 175.0000 12.0000 36.0000 4.0000
K100_027 180.0000 12.0000 36.0000 4.0000
K100_028 200.0000 12.0000 36.0000 4.0000
K100_029 250.0000 12.0000 36.0000 4.0000
K100_030 60.0000 11.0000 26.0000 7.0000
K100_031 60.0000 13.0000 26.0000 9.0000
K100_032 80.0000 11.0000 26.0000 7.0000
K100_033 80.0000 13.0000 26.0000 9.0000
K100_034 90.0000 11.0000 36.0000 *
K100_035 90.0000 13.0000 36.0000 *
K100_036 90.0000 15.0000 36.0000 *
K100_037 90.0000 16.5000 36.0000 *
K100_038 100.0000 11.0000 36.0000 7.0000
K100_039 100.0000 13.0000 36.0000 9.0000
K100_040 100.0000 15.0000 36.0000 11.0000
K100_041 100.0000 16.5000 36.0000 12.5000
K100_042 110.0000 11.0000 36.0000 7.0000
K100_043 110.0000 13.0000 36.0000 9.0000
K100_044 110.0000 15.0000 36.0000 11.0000
K100_045 110.0000 16.5000 36.0000 12.5000
K100_046 120.0000 11.0000 36.0000 7.0000
K100_047 120.0000 13.0000 36.0000 9.0000
K100_048 120.0000 15.0000 36.0000 11.0000
K100_049 120.0000 16.5000 36.0000 12.5000
K100_050 125.0000 11.0000 36.0000 7.0000
K100_051 125.0000 13.0000 36.0000 9.0000
K100_052 125.0000 15.0000 36.0000 11.0000
InstanceName
D H d1 h1
HASCO METRIC LOCATING RINGS
Mold Base Library 22 - 3
K100_053 125.0000 16.5000 36.0000 12.5000
K100_054 160.0000 11.0000 36.0000 7.0000
K100_055 160.0000 13.0000 36.0000 9.0000
K100_056 160.0000 15.0000 36.0000 11.0000
K100_057 160.0000 16.5000 36.0000 12.5000
K100_058 175.0000 11.0000 36.0000 7.0000
K100_059 175.0000 13.0000 36.0000 9.0000
K100_060 175.0000 15.0000 36.0000 11.0000
K100_061 175.0000 16.5000 36.0000 12.5000
InstanceName
D H d1 h1
HASCO METRIC LOCATING RINGS
22 - 4 Mold Base Library
LOCATING RING, CATALOG NO. K500
Generic Part Name: K500
InstanceName
D H h1
K500_010 60.0000 8.0000 4.0000
K500_011 80.0000 8.0000 4.0000
K500_012 100.0000 8.0000 4.0000
K500_013 110.0000 8.0000 4.0000
K500_014 110.0000 12.0000 4.0000
K500_015 120.0000 8.0000 4.0000
K500_016 120.0000 12.0000 4.0000
K500_017 125.0000 8.0000 4.0000
K500_018 125.0000 12.0000 4.0000
K500_019 140.0000 8.0000 4.0000
K500_020 150.0000 8.0000 4.0000
K500_021 160.0000 8.0000 4.0000
K500_022 160.0000 12.0000 4.0000
K500_023 175.0000 8.0000 4.0000
K500_024 175.0000 12.0000 4.0000
K500_025 200.0000 12.0000 4.0000
K500_026 250.0000 12.0000 4.0000
K500_027 60.0000 11.0000 7.0000
K500_028 60.0000 13.0000 9.0000
HASCO METRIC LOCATING RINGS
Mold Base Library 22 - 5
K500_029 80.0000 11.0000 7.0000
K500_030 80.0000 13.0000 9.0000
K500_031 100.0000 11.0000 7.0000
K500_032 100.0000 13.0000 9.0000
K500_033 100.0000 15.0000 11.0000
K500_034 100.0000 16.5000 12.5000
K500_035 110.0000 11.0000 7.0000
K500_036 110.0000 13.0000 9.0000
K500_037 110.0000 15.0000 11.0000
K500_038 110.0000 16.5000 12.5000
K500_039 120.0000 11.0000 7.0000
K500_040 120.0000 13.0000 9.0000
K500_041 120.0000 15.0000 11.0000
K500_042 120.0000 16.5000 12.5000
K500_043 125.0000 11.0000 7.0000
K500_044 125.0000 13.0000 9.0000
K500_045 125.0000 15.0000 11.0000
K500_046 125.0000 16.5000 12.5000
K500_047 160.0000 11.0000 7.0000
K500_048 160.0000 13.0000 9.0000
K500_049 160.0000 15.0000 11.0000
K500_050 160.0000 16.5000 12.5000
K500_051 175.0000 11.0000 7.0000
K500_052 175.0000 13.0000 9.0000
K500_053 175.0000 15.0000 11.0000
K500_054 175.0000 16.5000 12.5000
InstanceName
D H h1
Mold Base Library 23 - 1
3HASCO METRIC BUSHINGS
BUSHING, CATALOG NO. Z10
Generic Part Name: Z10
InstanceName
S2 d_1 l l1 k d_3 d_4
Z10_010 12.0000 9.0000 7.0000 15.0000 3.0000 14.0000 16.0000
Z10_011 17.0000 9.0000 7.0000 20.0000 3.0000 14.0000 16.0000
Z10_012 22.0000 9.0000 7.0000 25.0000 3.0000 14.0000 16.0000
Z10_013 27.0000 9.0000 7.0000 30.0000 3.0000 14.0000 16.0000
Z10_014 36.0000 9.0000 7.0000 39.0000 3.0000 14.0000 16.0000
Z10_015 46.0000 9.0000 46.0000 49.0000 3.0000 14.0000 16.0000
Z10_016 56.0000 9.0000 46.0000 59.0000 3.0000 14.0000 16.0000
Z10_017 66.0000 9.0000 46.0000 69.0000 3.0000 14.0000 16.0000
Z10_018 12.0000 10.0000 46.0000 15.0000 3.0000 14.0000 16.0000
Z10_019 17.0000 10.0000 46.0000 20.0000 3.0000 14.0000 16.0000
Z10_020 22.0000 10.0000 46.0000 25.0000 3.0000 14.0000 16.0000
Z10_021 27.0000 10.0000 46.0000 30.0000 3.0000 14.0000 16.0000
Z10_022 36.0000 10.0000 46.0000 39.0000 3.0000 14.0000 16.0000
Z10_023 46.0000 10.0000 46.0000 49.0000 3.0000 14.0000 16.0000
Z10_024 56.0000 10.0000 46.0000 59.0000 3.0000 14.0000 16.0000
Z10_025 66.0000 10.0000 46.0000 69.0000 3.0000 14.0000 16.0000
Z10_026 17.0000 14.0000 46.0000 26.0000 6.0000 20.0000 25.0000
Z10_027 22.0000 14.0000 46.0000 31.0000 6.0000 20.0000 25.0000
HASCO METRIC BUSHINGS
23 - 2 Mold Base Library
Z10_028 27.0000 14.0000 46.0000 36.0000 6.0000 20.0000 25.0000
Z10_029 36.0000 14.0000 46.0000 45.0000 6.0000 20.0000 25.0000
Z10_030 46.0000 14.0000 46.0000 55.0000 6.0000 20.0000 25.0000
Z10_031 17.0000 15.0000 46.0000 26.0000 6.0000 20.0000 25.0000
Z10_032 22.0000 15.0000 46.0000 31.0000 6.0000 20.0000 25.0000
Z10_033 27.0000 15.0000 46.0000 36.0000 6.0000 20.0000 25.0000
Z10_034 36.0000 15.0000 46.0000 45.0000 6.0000 20.0000 25.0000
Z10_035 46.0000 15.0000 46.0000 55.0000 6.0000 20.0000 25.0000
Z10_036 56.0000 14.0000 56.0000 65.0000 6.0000 20.0000 25.0000
Z10_037 66.0000 14.0000 56.0000 75.0000 6.0000 20.0000 25.0000
Z10_038 76.0000 14.0000 56.0000 85.0000 6.0000 20.0000 25.0000
Z10_039 86.0000 14.0000 56.0000 95.0000 6.0000 20.0000 25.0000
Z10_040 96.0000 14.0000 56.0000 105.0000 6.0000 20.0000 25.0000
Z10_041 116.0000 14.0000 56.0000 125.0000 6.0000 20.0000 25.0000
Z10_042 56.0000 15.0000 56.0000 65.0000 6.0000 20.0000 25.0000
Z10_043 66.0000 15.0000 56.0000 75.0000 6.0000 20.0000 25.0000
Z10_044 76.0000 15.0000 56.0000 85.0000 6.0000 20.0000 25.0000
Z10_045 86.0000 15.0000 56.0000 95.0000 6.0000 20.0000 25.0000
Z10_046 96.0000 15.0000 56.0000 105.0000 6.0000 20.0000 25.0000
Z10_047 116.0000 15.0000 56.0000 125.0000 6.0000 20.0000 25.0000
Z10_048 17.0000 18.0000 56.0000 26.0000 6.0000 26.0000 31.0000
Z10_049 22.0000 18.0000 56.0000 31.0000 6.0000 26.0000 31.0000
Z10_050 27.0000 18.0000 56.0000 36.0000 6.0000 26.0000 31.0000
Z10_051 36.0000 18.0000 56.0000 45.0000 6.0000 26.0000 31.0000
Z10_052 46.0000 18.0000 56.0000 55.0000 6.0000 26.0000 31.0000
Z10_053 56.0000 18.0000 56.0000 65.0000 6.0000 26.0000 31.0000
Z10_054 17.0000 20.0000 56.0000 26.0000 6.0000 26.0000 31.0000
Z10_055 22.0000 20.0000 56.0000 31.0000 6.0000 26.0000 31.0000
Z10_056 27.0000 20.0000 56.0000 36.0000 6.0000 26.0000 31.0000
Z10_057 36.0000 20.0000 56.0000 45.0000 6.0000 26.0000 31.0000
InstanceName
S2 d_1 l l1 k d_3 d_4
HASCO METRIC BUSHINGS
Mold Base Library 23 - 3
Z10_058 46.0000 20.0000 56.0000 55.0000 6.0000 26.0000 31.0000
Z10_059 56.0000 20.0000 56.0000 65.0000 6.0000 26.0000 31.0000
Z10_060 66.0000 18.0000 56.0000 75.0000 6.0000 26.0000 31.0000
Z10_061 76.0000 18.0000 76.0000 85.0000 6.0000 26.0000 31.0000
Z10_062 86.0000 18.0000 76.0000 95.0000 6.0000 26.0000 31.0000
Z10_063 96.0000 18.0000 76.0000 105.0000 6.0000 26.0000 31.0000
Z10_064 116.0000 18.0000 76.0000 125.0000 6.0000 26.0000 31.0000
Z10_065 136.0000 18.0000 76.0000 145.0000 6.0000 26.0000 31.0000
Z10_066 66.0000 20.0000 76.0000 75.0000 6.0000 26.0000 31.0000
Z10_067 76.0000 20.0000 76.0000 85.0000 6.0000 26.0000 31.0000
Z10_068 86.0000 20.0000 76.0000 95.0000 6.0000 26.0000 31.0000
Z10_069 96.0000 20.0000 76.0000 105.0000 6.0000 26.0000 31.0000
Z10_070 116.0000 20.0000 76.0000 125.0000 6.0000 26.0000 31.0000
Z10_071 136.0000 20.0000 76.0000 145.0000 6.0000 26.0000 31.0000
Z10_072 17.0000 22.0000 76.0000 26.0000 6.0000 30.0000 35.0000
Z10_073 22.0000 22.0000 76.0000 31.0000 6.0000 30.0000 35.0000
Z10_074 27.0000 22.0000 76.0000 36.0000 6.0000 30.0000 35.0000
Z10_075 36.0000 22.0000 76.0000 45.0000 6.0000 30.0000 35.0000
Z10_076 46.0000 22.0000 76.0000 55.0000 6.0000 30.0000 35.0000
Z10_077 56.0000 22.0000 76.0000 65.0000 6.0000 30.0000 35.0000
Z10_078 17.0000 24.0000 76.0000 26.0000 6.0000 30.0000 35.0000
Z10_079 22.0000 24.0000 76.0000 31.0000 6.0000 30.0000 35.0000
Z10_080 27.0000 24.0000 76.0000 36.0000 6.0000 30.0000 35.0000
Z10_081 36.0000 24.0000 76.0000 45.0000 6.0000 30.0000 35.0000
Z10_082 46.0000 24.0000 76.0000 55.0000 6.0000 30.0000 35.0000
Z10_083 56.0000 24.0000 76.0000 65.0000 6.0000 30.0000 35.0000
Z10_084 66.0000 22.0000 76.0000 75.0000 6.0000 30.0000 35.0000
Z10_085 76.0000 22.0000 76.0000 85.0000 6.0000 30.0000 35.0000
Z10_086 86.0000 22.0000 76.0000 95.0000 6.0000 30.0000 35.0000
Z10_087 96.0000 22.0000 76.0000 105.0000 6.0000 30.0000 35.0000
InstanceName
S2 d_1 l l1 k d_3 d_4
HASCO METRIC BUSHINGS
23 - 4 Mold Base Library
Z10_088 116.0000 22.0000 96.0000 125.0000 6.0000 30.0000 35.0000
Z10_089 136.0000 22.0000 96.0000 145.0000 6.0000 30.0000 35.0000
Z10_090 156.0000 22.0000 96.0000 165.0000 6.0000 30.0000 35.0000
Z10_091 66.0000 24.0000 96.0000 75.0000 6.0000 30.0000 35.0000
Z10_092 76.0000 24.0000 96.0000 85.0000 6.0000 30.0000 35.0000
Z10_093 86.0000 24.0000 96.0000 95.0000 6.0000 30.0000 35.0000
Z10_094 96.0000 24.0000 96.0000 105.0000 6.0000 30.0000 35.0000
Z10_095 116.0000 24.0000 96.0000 125.0000 6.0000 30.0000 35.0000
Z10_096 136.0000 24.0000 96.0000 145.0000 6.0000 30.0000 35.0000
Z10_097 156.0000 24.0000 96.0000 165.0000 6.0000 30.0000 35.0000
Z10_098 27.0000 30.0000 96.0000 36.0000 6.0000 42.0000 47.0000
Z10_099 36.0000 30.0000 96.0000 45.0000 6.0000 42.0000 47.0000
Z10_100 46.0000 30.0000 96.0000 55.0000 6.0000 42.0000 47.0000
Z10_101 56.0000 30.0000 96.0000 65.0000 6.0000 42.0000 47.0000
Z10_102 66.0000 30.0000 96.0000 75.0000 6.0000 42.0000 47.0000
Z10_103 76.0000 30.0000 96.0000 85.0000 6.0000 42.0000 47.0000
Z10_104 86.0000 30.0000 96.0000 95.0000 6.0000 42.0000 47.0000
Z10_105 96.0000 30.0000 96.0000 105.0000 6.0000 42.0000 47.0000
Z10_106 116.0000 30.0000 96.0000 125.0000 6.0000 42.0000 47.0000
Z10_107 136.0000 30.0000 116.0000 145.0000 6.0000 42.0000 47.0000
Z10_108 156.0000 30.0000 116.0000 165.0000 6.0000 42.0000 47.0000
Z10_109 196.0000 30.0000 116.0000 205.0000 6.0000 42.0000 47.0000
Z10_110 27.0000 32.0000 116.0000 36.0000 6.0000 42.0000 47.0000
Z10_111 36.0000 32.0000 116.0000 45.0000 6.0000 42.0000 47.0000
Z10_112 46.0000 32.0000 116.0000 55.0000 6.0000 42.0000 47.0000
Z10_113 56.0000 32.0000 116.0000 65.0000 6.0000 42.0000 47.0000
Z10_114 66.0000 32.0000 116.0000 75.0000 6.0000 42.0000 47.0000
Z10_115 76.0000 32.0000 116.0000 85.0000 6.0000 42.0000 47.0000
Z10_116 86.0000 32.0000 116.0000 95.0000 6.0000 42.0000 47.0000
Z10_117 96.0000 32.0000 116.0000 105.0000 6.0000 42.0000 47.0000
InstanceName
S2 d_1 l l1 k d_3 d_4
HASCO METRIC BUSHINGS
Mold Base Library 23 - 5
Z10_118 116.0000 32.0000 116.0000 125.0000 6.0000 42.0000 47.0000
Z10_119 136.0000 32.0000 116.0000 145.0000 6.0000 42.0000 47.0000
Z10_120 156.0000 32.0000 116.0000 165.0000 6.0000 42.0000 47.0000
Z10_121 196.0000 32.0000 116.0000 205.0000 6.0000 42.0000 47.0000
Z10_122 46.0000 40.0000 116.0000 58.0000 10.0000 54.0000 60.0000
Z10_123 56.0000 40.0000 116.0000 68.0000 10.0000 54.0000 60.0000
Z10_124 66.0000 40.0000 116.0000 78.0000 10.0000 54.0000 60.0000
Z10_125 76.0000 40.0000 116.0000 88.0000 10.0000 54.0000 60.0000
Z10_126 86.0000 40.0000 116.0000 98.0000 10.0000 54.0000 60.0000
Z10_127 96.0000 40.0000 116.0000 108.0000 10.0000 54.0000 60.0000
Z10_128 116.0000 40.0000 116.0000 128.0000 10.0000 54.0000 60.0000
Z10_129 136.0000 40.0000 136.0000 148.0000 10.0000 54.0000 60.0000
Z10_130 156.0000 40.0000 136.0000 168.0000 10.0000 54.0000 60.0000
Z10_131 196.0000 40.0000 136.0000 208.0000 10.0000 54.0000 60.0000
Z10_132 246.0000 40.0000 136.0000 258.0000 10.0000 54.0000 60.0000
Z10_133 46.0000 42.0000 136.0000 58.0000 10.0000 54.0000 60.0000
Z10_134 56.0000 42.0000 136.0000 68.0000 10.0000 54.0000 60.0000
Z10_135 66.0000 42.0000 136.0000 78.0000 10.0000 54.0000 60.0000
Z10_136 76.0000 42.0000 136.0000 88.0000 10.0000 54.0000 60.0000
Z10_137 86.0000 42.0000 136.0000 98.0000 10.0000 54.0000 60.0000
Z10_138 96.0000 42.0000 136.0000 108.0000 10.0000 54.0000 60.0000
Z10_139 116.0000 42.0000 136.0000 128.0000 10.0000 54.0000 60.0000
Z10_140 136.0000 42.0000 136.0000 148.0000 10.0000 54.0000 60.0000
Z10_141 156.0000 42.0000 136.0000 168.0000 10.0000 54.0000 60.0000
Z10_142 196.0000 42.0000 136.0000 208.0000 10.0000 54.0000 60.0000
Z10_143 246.0000 42.0000 136.0000 258.0000 10.0000 54.0000 60.0000
InstanceName
S2 d_1 l l1 k d_3 d_4
HASCO METRIC BUSHINGS
23 - 6 Mold Base Library
BUSHING, CATALOG NO. Z11
Generic Part Name: Z11
Notes
1. “*” denotes a non-existent value.
InstanceName
S2 d_1 l d_3 d_4 k Cut
Z11_010 9.0000 9.0000 * 14.0000 16.0000 3.0000 N
Z11_011 12.0000 9.0000 * 14.0000 16.0000 3.0000 N
Z11_012 17.0000 9.0000 * 14.0000 16.0000 3.0000 N
Z11_013 22.0000 9.0000 * 14.0000 16.0000 3.0000 N
Z11_014 27.0000 9.0000 * 14.0000 16.0000 3.0000 N
Z11_015 36.0000 9.0000 * 14.0000 16.0000 3.0000 N
Z11_016 46.0000 9.0000 * 14.0000 16.0000 3.0000 N
Z11_017 56.0000 9.0000 46.0000 14.0000 16.0000 3.0000 Y
Z11_018 66.0000 9.0000 46.0000 14.0000 16.0000 3.0000 Y
Z11_019 9.0000 10.0000 * 14.0000 16.0000 3.0000 N
Z11_020 12.0000 10.0000 * 14.0000 16.0000 3.0000 N
Z11_021 17.0000 10.0000 * 14.0000 16.0000 3.0000 N
Z11_022 22.0000 10.0000 * 14.0000 16.0000 3.0000 N
Z11_023 27.0000 10.0000 * 14.0000 16.0000 3.0000 N
Z11_024 36.0000 10.0000 * 14.0000 16.0000 3.0000 N
Z11_025 46.0000 10.0000 * 14.0000 16.0000 3.0000 N
Z11_026 56.0000 10.0000 46.0000 14.0000 16.0000 3.0000 Y
HASCO METRIC BUSHINGS
Mold Base Library 23 - 7
Z11_027 66.0000 10.0000 46.0000 14.0000 16.0000 3.0000 Y
Z11_028 17.0000 12.0000 * 18.0000 23.0000 6.0000 N
Z11_029 22.0000 12.0000 * 18.0000 23.0000 6.0000 N
Z11_030 27.0000 12.0000 * 18.0000 23.0000 6.0000 N
Z11_031 36.0000 12.0000 * 18.0000 23.0000 6.0000 N
Z11_032 46.0000 12.0000 * 18.0000 23.0000 6.0000 N
Z11_033 56.0000 12.0000 * 18.0000 23.0000 6.0000 N
Z11_034 12.0000 14.0000 * 20.0000 25.0000 6.0000 N
Z11_035 17.0000 14.0000 * 20.0000 25.0000 6.0000 N
Z11_036 22.0000 14.0000 * 20.0000 25.0000 6.0000 N
Z11_037 27.0000 14.0000 * 20.0000 25.0000 6.0000 N
Z11_038 36.0000 14.0000 * 20.0000 25.0000 6.0000 N
Z11_039 46.0000 14.0000 * 20.0000 25.0000 6.0000 N
Z11_040 56.0000 14.0000 * 20.0000 25.0000 6.0000 N
Z11_041 66.0000 14.0000 56.0000 20.0000 25.0000 6.0000 Y
Z11_042 76.0000 14.0000 56.0000 20.0000 25.0000 6.0000 Y
Z11_043 86.0000 14.0000 56.0000 20.0000 25.0000 6.0000 Y
Z11_044 96.0000 14.0000 56.0000 20.0000 25.0000 6.0000 Y
Z11_045 12.0000 15.0000 * 20.0000 25.0000 6.0000 N
Z11_046 17.0000 15.0000 * 20.0000 25.0000 6.0000 N
Z11_047 22.0000 15.0000 * 20.0000 25.0000 6.0000 N
Z11_048 27.0000 15.0000 * 20.0000 25.0000 6.0000 N
Z11_049 36.0000 15.0000 * 20.0000 25.0000 6.0000 N
Z11_050 46.0000 15.0000 * 20.0000 25.0000 6.0000 N
Z11_051 56.0000 15.0000 * 20.0000 25.0000 6.0000 N
Z11_052 66.0000 15.0000 56.0000 20.0000 25.0000 6.0000 Y
Z11_053 76.0000 15.0000 56.0000 20.0000 25.0000 6.0000 Y
Z11_054 86.0000 15.0000 56.0000 20.0000 25.0000 6.0000 Y
Z11_055 96.0000 15.0000 56.0000 20.0000 25.0000 6.0000 Y
Z11_056 17.0000 16.0000 * 22.0000 27.0000 6.0000 N
InstanceName
S2 d_1 l d_3 d_4 k Cut
HASCO METRIC BUSHINGS
23 - 8 Mold Base Library
Z11_057 22.0000 16.0000 * 22.0000 27.0000 6.0000 N
Z11_058 27.0000 16.0000 * 22.0000 27.0000 6.0000 N
Z11_059 36.0000 16.0000 * 22.0000 27.0000 6.0000 N
Z11_060 46.0000 16.0000 * 22.0000 27.0000 6.0000 N
Z11_061 56.0000 16.0000 * 22.0000 27.0000 6.0000 N
Z11_062 17.0000 18.0000 * 26.0000 31.0000 6.0000 N
Z11_063 22.0000 18.0000 * 26.0000 31.0000 6.0000 N
Z11_064 27.0000 18.0000 * 26.0000 31.0000 6.0000 N
Z11_065 36.0000 18.0000 * 26.0000 31.0000 6.0000 N
Z11_066 46.0000 18.0000 * 26.0000 31.0000 6.0000 N
Z11_067 56.0000 18.0000 * 26.0000 31.0000 6.0000 N
Z11_068 66.0000 18.0000 * 26.0000 31.0000 6.0000 N
Z11_069 76.0000 18.0000 * 26.0000 31.0000 6.0000 N
Z11_070 86.0000 18.0000 76.0000 26.0000 31.0000 6.0000 Y
Z11_071 96.0000 18.0000 76.0000 26.0000 31.0000 6.0000 Y
Z11_072 116.0000 18.0000 76.0000 26.0000 31.0000 6.0000 Y
Z11_073 17.0000 20.0000 * 26.0000 31.0000 6.0000 N
Z11_074 22.0000 20.0000 * 26.0000 31.0000 6.0000 N
Z11_075 27.0000 20.0000 * 26.0000 31.0000 6.0000 N
Z11_076 36.0000 20.0000 * 26.0000 31.0000 6.0000 N
Z11_077 46.0000 20.0000 * 26.0000 31.0000 6.0000 N
Z11_078 56.0000 20.0000 * 26.0000 31.0000 6.0000 N
Z11_079 66.0000 20.0000 * 26.0000 31.0000 6.0000 N
Z11_080 76.0000 20.0000 * 26.0000 31.0000 6.0000 N
Z11_081 86.0000 20.0000 76.0000 26.0000 31.0000 6.0000 Y
Z11_082 96.0000 20.0000 76.0000 26.0000 31.0000 6.0000 Y
Z11_083 116.0000 20.0000 76.0000 26.0000 31.0000 6.0000 Y
Z11_084 17.0000 22.0000 * 30.0000 35.0000 6.0000 N
Z11_085 22.0000 22.0000 * 30.0000 35.0000 6.0000 N
Z11_086 27.0000 22.0000 * 30.0000 35.0000 6.0000 N
InstanceName
S2 d_1 l d_3 d_4 k Cut
HASCO METRIC BUSHINGS
Mold Base Library 23 - 9
Z11_087 36.0000 22.0000 * 30.0000 35.0000 6.0000 N
Z11_088 46.0000 22.0000 * 30.0000 35.0000 6.0000 N
Z11_089 56.0000 22.0000 * 30.0000 35.0000 6.0000 N
Z11_090 66.0000 22.0000 * 30.0000 35.0000 6.0000 N
Z11_091 76.0000 22.0000 * 30.0000 35.0000 6.0000 N
Z11_092 86.0000 22.0000 * 30.0000 35.0000 6.0000 N
Z11_093 96.0000 22.0000 * 30.0000 35.0000 6.0000 N
Z11_094 116.0000 22.0000 96.0000 30.0000 35.0000 6.0000 Y
Z11_095 136.0000 22.0000 96.0000 30.0000 35.0000 6.0000 Y
Z11_096 17.0000 24.0000 * 30.0000 35.0000 6.0000 N
Z11_097 22.0000 24.0000 * 30.0000 35.0000 6.0000 N
Z11_098 27.0000 24.0000 * 30.0000 35.0000 6.0000 N
Z11_099 36.0000 24.0000 * 30.0000 35.0000 6.0000 N
Z11_100 46.0000 24.0000 * 30.0000 35.0000 6.0000 N
Z11_101 56.0000 24.0000 * 30.0000 35.0000 6.0000 N
Z11_102 66.0000 24.0000 * 30.0000 35.0000 6.0000 N
Z11_103 76.0000 24.0000 * 30.0000 35.0000 6.0000 N
Z11_104 86.0000 24.0000 * 30.0000 35.0000 6.0000 N
Z11_105 96.0000 24.0000 * 30.0000 35.0000 6.0000 N
Z11_106 116.0000 24.0000 96.0000 30.0000 35.0000 6.0000 Y
Z11_107 136.0000 24.0000 96.0000 30.0000 35.0000 6.0000 Y
Z11_108 27.0000 30.0000 * 42.0000 47.0000 6.0000 N
Z11_109 36.0000 30.0000 * 42.0000 47.0000 6.0000 N
Z11_110 46.0000 30.0000 * 42.0000 47.0000 6.0000 N
Z11_111 56.0000 30.0000 * 42.0000 47.0000 6.0000 N
Z11_112 66.0000 30.0000 * 42.0000 47.0000 6.0000 N
Z11_113 76.0000 30.0000 * 42.0000 47.0000 6.0000 N
Z11_114 86.0000 30.0000 * 42.0000 47.0000 6.0000 N
Z11_115 96.0000 30.0000 * 42.0000 47.0000 6.0000 N
Z11_116 116.0000 30.0000 * 42.0000 47.0000 6.0000 N
InstanceName
S2 d_1 l d_3 d_4 k Cut
HASCO METRIC BUSHINGS
23 - 10 Mold Base Library
Z11_117 136.0000 30.0000 116.0000 42.0000 47.0000 6.0000 Y
Z11_118 156.0000 30.0000 116.0000 42.0000 47.0000 6.0000 Y
Z11_119 27.0000 32.0000 * 42.0000 47.0000 6.0000 N
Z11_120 36.0000 32.0000 * 42.0000 47.0000 6.0000 N
Z11_121 46.0000 32.0000 * 42.0000 47.0000 6.0000 N
Z11_122 56.0000 32.0000 * 42.0000 47.0000 6.0000 N
Z11_123 66.0000 32.0000 * 42.0000 47.0000 6.0000 N
Z11_124 76.0000 32.0000 * 42.0000 47.0000 6.0000 N
Z11_125 86.0000 32.0000 * 42.0000 47.0000 6.0000 N
Z11_126 96.0000 32.0000 * 42.0000 47.0000 6.0000 N
Z11_127 116.0000 32.0000 * 42.0000 47.0000 6.0000 N
Z11_128 136.0000 32.0000 116.0000 42.0000 47.0000 6.0000 Y
Z11_129 156.0000 32.0000 116.0000 42.0000 47.0000 6.0000 Y
Z11_130 46.0000 40.0000 * 54.0000 60.0000 10.0000 N
Z11_131 56.0000 40.0000 * 54.0000 60.0000 10.0000 N
Z11_132 66.0000 40.0000 * 54.0000 60.0000 10.0000 N
Z11_133 76.0000 40.0000 * 54.0000 60.0000 10.0000 N
Z11_134 86.0000 40.0000 * 54.0000 60.0000 10.0000 N
Z11_135 96.0000 40.0000 * 54.0000 60.0000 10.0000 N
Z11_136 116.0000 40.0000 * 54.0000 60.0000 10.0000 N
Z11_137 136.0000 40.0000 * 54.0000 60.0000 10.0000 N
Z11_138 156.0000 40.0000 136.0000 54.0000 60.0000 10.0000 Y
Z11_139 196.0000 40.0000 136.0000 54.0000 60.0000 10.0000 Y
Z11_140 246.0000 40.0000 136.0000 54.0000 60.0000 10.0000 Y
Z11_141 46.0000 42.0000 * 54.0000 60.0000 10.0000 N
Z11_142 56.0000 42.0000 * 54.0000 60.0000 10.0000 N
Z11_143 66.0000 42.0000 * 54.0000 60.0000 10.0000 N
Z11_144 76.0000 42.0000 * 54.0000 60.0000 10.0000 N
Z11_145 86.0000 42.0000 * 54.0000 60.0000 10.0000 N
Z11_146 96.0000 42.0000 * 54.0000 60.0000 10.0000 N
InstanceName
S2 d_1 l d_3 d_4 k Cut
HASCO METRIC BUSHINGS
Mold Base Library 23 - 11
Z11_147 116.0000 42.0000 * 54.0000 60.0000 10.0000 N
Z11_148 136.0000 42.0000 * 54.0000 60.0000 10.0000 N
Z11_149 156.0000 42.0000 136.0000 54.0000 60.0000 10.0000 Y
Z11_150 196.0000 42.0000 136.0000 54.0000 60.0000 10.0000 Y
Z11_151 246.0000 42.0000 136.0000 54.0000 60.0000 10.0000 Y
Z11_152 76.0000 50.0000 * 66.0000 72.0000 10.0000 N
Z11_153 96.0000 50.0000 * 66.0000 72.0000 10.0000 N
Z11_154 116.0000 50.0000 * 66.0000 72.0000 10.0000 N
Z11_155 136.0000 50.0000 * 66.0000 72.0000 10.0000 N
Z11_156 156.0000 50.0000 136.0000 66.0000 72.0000 10.0000 Y
Z11_157 196.0000 50.0000 136.0000 66.0000 72.0000 10.0000 Y
Z11_158 96.0000 60.0000 * 80.0000 86.0000 20.0000 N
Z11_159 116.0000 60.0000 * 80.0000 86.0000 20.0000 N
Z11_160 136.0000 60.0000 * 80.0000 86.0000 20.0000 N
Z11_161 156.0000 60.0000 136.0000 80.0000 86.0000 20.0000 Y
Z11_162 196.0000 60.0000 136.0000 80.0000 86.0000 20.0000 Y
Z11_163 246.0000 60.0000 136.0000 80.0000 86.0000 20.0000 Y
InstanceName
S2 d_1 l d_3 d_4 k Cut
HASCO METRIC BUSHINGS
23 - 12 Mold Base Library
BUSHING, CATALOG NO. Z20
Generic Part Name: Z20
InstanceName
d_3 l l1 l2 d_1 d_2
Z20_010 14.00 20.00 8.00 2.00 11.00 7.00
Z20_011 14.00 30.00 8.00 2.00 11.00 7.00
Z20_012 14.00 40.00 8.00 2.00 11.00 7.00
Z20_013 14.00 50.00 8.00 2.00 11.00 7.00
Z20_014 14.00 60.00 8.00 2.00 11.00 7.00
Z20_015 14.00 70.00 8.00 2.00 11.00 7.00
Z20_016 14.00 80.00 8.00 2.00 11.00 7.00
Z20_017 14.00 100.00 8.00 2.00 11.00 7.00
Z20_018 20.00 30.00 13.00 2.00 16.00 11.00
Z20_019 20.00 40.00 13.00 2.00 16.00 11.00
Z20_020 20.00 60.00 13.00 2.00 16.00 11.00
Z20_021 20.00 80.00 13.00 2.00 16.00 11.00
Z20_022 20.00 100.00 13.00 2.00 16.00 11.00
Z20_023 20.00 120.00 13.00 2.00 16.00 11.00
Z20_024 20.00 140.00 13.00 2.00 16.00 11.00
Z20_025 20.00 160.00 13.00 2.00 16.00 11.00
Z20_026 26.00 30.00 13.00 2.50 21.00 11.00
Z20_027 26.00 40.00 13.00 2.50 21.00 11.00
HASCO METRIC BUSHINGS
Mold Base Library 23 - 13
Z20_028 26.00 60.00 13.00 2.50 21.00 11.00
Z20_029 26.00 80.00 13.00 2.50 21.00 11.00
Z20_030 26.00 100.00 13.00 2.50 21.00 11.00
Z20_031 26.00 120.00 13.00 2.50 21.00 11.00
Z20_032 26.00 140.00 13.00 2.50 21.00 11.00
Z20_033 26.00 160.00 13.00 2.50 21.00 11.00
Z20_034 26.00 180.00 13.00 2.50 21.00 11.00
Z20_035 30.00 40.00 13.00 2.50 25.00 17.00
Z20_036 30.00 60.00 13.00 2.50 25.00 17.00
Z20_037 30.00 80.00 13.00 2.50 25.00 17.00
Z20_038 30.00 100.00 13.00 2.50 25.00 17.00
Z20_039 30.00 120.00 13.00 2.50 25.00 17.00
Z20_040 30.00 140.00 13.00 2.50 25.00 17.00
Z20_041 30.00 160.00 13.00 2.50 25.00 17.00
Z20_042 30.00 180.00 13.00 2.50 25.00 17.00
Z20_043 30.00 200.00 13.00 2.50 25.00 17.00
Z20_044 30.00 240.00 13.00 2.50 25.00 17.00
Z20_045 42.00 40.00 13.00 4.50 33.00 24.00
Z20_046 42.00 60.00 13.00 4.50 33.00 24.00
Z20_047 42.00 80.00 13.00 4.50 33.00 24.00
Z20_048 42.00 100.00 13.00 4.50 33.00 24.00
Z20_049 42.00 120.00 13.00 4.50 33.00 24.00
Z20_050 42.00 140.00 13.00 4.50 33.00 24.00
Z20_051 42.00 160.00 13.00 4.50 33.00 24.00
Z20_052 42.00 180.00 13.00 4.50 33.00 24.00
Z20_053 42.00 200.00 13.00 4.50 33.00 24.00
Z20_054 42.00 220.00 13.00 4.50 33.00 24.00
Z20_055 42.00 260.00 13.00 4.50 33.00 24.00
Z20_056 42.00 300.00 13.00 4.50 33.00 24.00
Z20_057 54.00 60.00 13.00 4.50 43.00 32.00
InstanceName
d_3 l l1 l2 d_1 d_2
HASCO METRIC BUSHINGS
23 - 14 Mold Base Library
Z20_058 54.00 80.00 13.00 4.50 43.00 32.00
Z20_059 54.00 120.00 13.00 4.50 43.00 32.00
Z20_060 54.00 160.00 13.00 4.50 43.00 32.00
Z20_061 54.00 200.00 13.00 4.50 43.00 32.00
Z20_062 54.00 240.00 13.00 4.50 43.00 32.00
Z20_063 54.00 280.00 13.00 4.50 43.00 32.00
InstanceName
d_3 l l1 l2 d_1 d_2
HASCO METRIC BUSHINGS
Mold Base Library 23 - 15
BUSHING, CATALOG NO. Z45
Generic Part Name: Z45
InstanceName
b1 d_1 d_2 b2 l2 k r l1
Z45_01 1.50 3.00 6.00 1.80 35.00 3.00 0.30 60-150
Z45_02 1.60 3.00 6.00 1.90 35.00 3.00 0.30 75-150
Z45_03 2.00 4.00 8.00 2.40 35.00 3.00 0.30 75-150
Z45_04 2.20 4.00 8.00 2.40 35.00 3.00 0.30 75-150
Z45_05 2.50 5.00 10.00 3.00 35.00 3.00 0.30 75-150
Z45_06 2.70 5.00 10.00 3.00 45.00 3.00 0.30 75-150
Z45_07 3.00 5.00 10.00 3.30 45.00 3.00 0.30 75-150
Z45_08 3.20 5.00 10.00 3.50 45.00 3.00 0.30 75-175
Z45_09 3.50 6.00 12.00 4.00 45.00 5.00 0.50 75-175
Z45_10 3.70 6.00 12.00 4.00 45.00 5.00 0.50 75-175
Z45_11 4.00 6.00 12.00 4.30 45.00 5.00 0.50 75-200
Z45_12 4.20 8.00 14.00 5.00 45.00 5.00 0.50 75-200
Z45_13 5.00 8.00 14.00 5.30 45.00 5.00 0.50 75-200
Z45_14 5.20 8.00 14.00 5.50 45.00 5.00 0.50 75-200
Z45_15 6.00 10.00 16.00 6.30 45.00 5.00 0.50 75-250
Z45_16 6.20 10.00 16.00 6.50 45.00 5.00 0.50 75-250
Z45_17 8.00 12.00 20.00 8.30 45.00 7.00 0.80 75-275
Z45_18 8.20 12.00 20.00 8.50 45.00 7.00 0.80 75-275
HASCO METRIC BUSHINGS
23 - 16 Mold Base Library
Z45_19 10.00 14.00 22.00 10.50 50.00 7.00 0.80 100-275
Z45_20 12.00 16.00 22.00 12.50 50.00 7.00 0.80 100-275
InstanceName
b1 d_1 d_2 b2 l2 k r l1
Mold Base Library 24 - 1
24HASCO METRIC SCREWS
SCREW, CATALOG NO. Z30
Generic Part Name: Z30
InstanceName
NOM_SIZETHR_PITCH
thread_diahead_
diahead_height
hex_socket
b length
Z30_01 M4X0.7 4.00 7.00 4.00 3.0000 7.9-22.9 10 to 25
Z30_02 M5X0.8 5.00 8.50 5.00 4.0000 5.6-22.6 8 to 40
Z30_03 M6X1 6.00 10.00 6.00 5.0000 7-27 10 to 70
Z30_04 M8X1.25 8.00 13.00 8.00 6.0000 12.3-31.3 16 to 80
Z30_05 M10X1.5 10.00 16.00 10.00 8.0000 11.5-35.5 16 to 120
Z30_06 M12X1.75 12.00 18.00 12.00 10.0000 14.8-36 20 to 140
Z30_07 M16X2 16.00 24.00 16.00 14.0000 24-54 30 to 130
HASCO METRIC SCREWS
24 - 2 Mold Base Library
SCREW, CATALOG NO. Z31
Generic Part Name: Z31
InstanceName
NOM_SIZE_THR_PITCH
thread_dia head_dia head_height
HEX SOCKSIZE
sock_depth
Z31_01 M4X0.7 4.00 7.00 4.00 3.0000 2.00
Z31_02 M5X0.8 5.00 8.50 5.00 4.0000 2.50
Z31_03 M6X1 6.00 10.00 6.00 5.0000 3.00
Z31_04 M8X1.25 8.00 13.00 8.00 6.0000 4.00
Z31_05 M10X1.5 10.00 16.00 10.00 8.0000 5.00
Z31_06 M12X1.75 12.00 18.00 12.00 10.0000 6.00
Z31_07 M16X2 16.00 24.00 16.00 14.0000 8.00
Z31_08 M20X2.5 20.00 30.00 20.00 17.0000 10.00
Z31_09 M24X3 24.00 36.00 24.00 19.0000 12.00
HASCO METRIC SCREWS
Mold Base Library 24 - 3
SCREW, CATALOG NO. Z33
Generic Part Name: Z33
InstanceName
NOM SIZETHR PITCH
thread_dia
head_dia
head_height HEXSOCKSIZE
sock_depth
Z33_0101 M4X0.7 4.00 8.00 5.70 8.96 2.50000
Z33_0102 M4X0.7 4.00 12.00 9.70 8.96 2.50000
Z33_0103 M4X0.7 4.00 16.00 14.00 8.96 2.50000
Z33_0201 M6X1 6.00 12.00 8.70 13.44 4.00000
Z33_0202 M6X1 6.00 16.00 12.70 13.44 4.00000
Z33_0203 M6X1 6.00 20.00 18.00 13.44 4.00000
Z33_0204 M6X1 6.00 25.00 18.00 13.44 4.00000
Z33_0301 M8X1.25 8.00 16.00 11.60 17.92 5.00000
Z33_0302 M8X1.25 8.00 20.00 15.60 17.92 5.00000
Z33_0401 M10X1.5 10.00 20.00 14.50 22.40 6.00000
Z33_0501 M12X1.75 12.00 20.00 13.50 26.88 8.00000
HASCO METRIC SCREWS
24 - 4 Mold Base Library
SCREW, CATALOG NO. Z34
Generic Part Name: Z34
InstanceName
NOMINAL_DIA THR
PITCH
THRPITCH
LengthSOCKETDEPTH
HEXSOCKSIZE
point_dia
point_length
Z34_0101 M4X0.7 4.00 10 2.50 2.0 2.50 3.00
Z34_0201 M6X1 6.00 18 3.50 3.0 4.00 3.50
Z34_0202 M6X1 6.00 25 3.50 3.0 4.00 3.50
Z34_0301 M8X1.25 8.00 20 5.00 4.0 5.50 5.00
Z34_0302 M8X1.25 8.00 30 5.00 4.0 5.50 5.00
Z34_0401 M10X1.5 10.00 30 6.00 5.0 7.00 5.50
Z34_0402 M10X1.5 10.00 40 6.00 5.0 7.00 5.50
Z34_0403 M10X1.5 10.00 50 6.00 5.0 7.00 5.50
Z34_0501 M12X1.75 12.00 30 8.00 6.0 8.50 7.00
Z34_0502 M12X1.75 12.00 40 8.00 6.0 8.50 7.00
Z34_0601 M16X2 16.00 45 10.00 8.0 12.00 9.00
Z34_0602 M16X2 16.00 55 10.00 8.0 12.00 9.00
HASCO METRIC SCREWS
Mold Base Library 24 - 5
SCREW, CATALOG NO. Z35
Generic Part Name: Z35
InstanceName
NOMINAL-DIA THRPITCH
ThreadPitch
lengthsocket_depth
HEXSOCKSIZE
point_dia
Z35_01 M3X0.5 3.00 2.00 1.50000 6-8 2
Z35_02 M4X0.7 4.00 2.50 2.00000 6-12 2.5
Z35_03 M5X0.8 5.00 3.50 2.50000 6-16 3
Z35_04 M6X1 6.00 4.00 3.00000 6-20 3.5
Z35_05 M8X1.25 8.00 5.50 4.00000 8-30 5
Z35_06 M10X1.5 10.00 7.00 5.00000 10-40 6
Z35_07 M12X1.75 12.00 8.50 6.00000 12-40 8
HASCO METRIC SCREWS
24 - 6 Mold Base Library
SCREW, CATALOG NO. Z69
Generic Part Name: Z69
InstanceName
NOMINALDIA
d_1 d_2 s H
Z69_01 4.0000 4.10 7.00 1.20 2.8000
Z69_02 5.0000 5.10 8.80 1.60 3.8000
Z69_03 6.0000 6.10 9.90 1.60 3.8000
Z69_04 8.0000 8.10 12.70 2.00 4.7000
Z69_05 10.0000 10.20 16.00 2.50 5.9000
Z69_06 12.0000 12.20 18.00 2.50 5.9000
Z69_07 16.0000 16.20 24.40 3.50 8.3000
Z69_08 20.0000 20.20 30.60 4.50 10.6000
Z69_09 24.0000 24.50 35.90 5.00 11.8000
Mold Base Library 25 - 1
13HASCO METRIC SPRINGS
SPRING, CATALOG NO. Z60
Generic Part Name: Z60
Instance Name L_N L_C F_N S_N D_ECOIL_
DD_I L_O CYL Spring
SPR1_REP 6.500 5.250 10.80 2.2000 3.0000 0.50000 2.0000 8.70 Y N
SPR2_REP 7.500 6.600 38.50 3.5000 3.2600 0.63000 2.0000 11.00 Y N
SPR3_REP 10.300 9.150 38.50 5.2000 3.2600 0.63000 2.0000 15.50 Y N
SPR4_REP 12.800 10.250 28.50 4.7000 3.2600 0.63000 2.0000 17.50 Y N
SPR5_REP 7.000 6.000 32.40 2.7000 4.8000 0.80000 3.2000 9.70 Y N
SPR6_REP 13.500 11.600 32.40 6.0000 4.8000 0.80000 3.2000 19.50 Y N
SPR7_REP 9.000 8.400 108.00 3.0000 6.0000 1.20000 3.6000 12.00 Y N
SPR8_REP 9.000 7.500 44.10 3.0000 6.0000 1.00000 4.0000 12.00 Y N
SPR9_REP 24.600 20.500 44.10 9.9000 6.0000 1.00000 4.0000 34.50 Y N
SPR10_REP 5.750 4.500 39.20 4.2500 6.8000 0.90000 5.0000 10.00 Y N
SPR11_REP 9.800 9.400 133.00 7.2000 7.5000 1.25000 5.0000 17.00 Y N
SPR12_REP 13.800 13.150 133.00 11.2000 7.5000 1.25000 5.0000 25.00 Y N
SPR13_REP 10.000 9.200 136.00 5.0000 8.0000 1.40000 5.2000 15.00 Y N
SPR14_REP 21.000 20.000 446.00 4.0000 12.0000 2.70000 6.6000 25.00 Y N
SPR15_REP 9.300 8.400 182.50 8.7000 10.0000 1.50000 7.0000 18.00 Y N
HASCO METRIC SPRINGS
25 - 2 Mold Base Library
SPR16_REP 10.100 7.500 33.40 8.9000 9.0000 1.00000 7.0000 19.00 Y N
SPR17_REP 14.000 13.500 314.00 6.0000 11.2000 2.10000 7.0000 20.00 Y N
SPR18_REP 21.500 18.750 141.00 18.5000 10.0000 1.50000 7.0000 40.00 Y N
SPR19_REP 15.000 12.750 177.00 10.0000 11.0000 1.70000 7.6000 25.00 Y N
SPR20_REP 7.700 6.900 85.30 12.3000 11.2000 1.25000 8.7000 20.00 Y N
SPR21_REP 21.100 18.150 85.30 42.9000 11.2000 1.25000 8.7000 64.00 Y N
SPR22_REP 22.000 19.200 147.00 28.0000 12.2000 1.60000 9.0000 50.00 Y N
SPR23_REP 25.300 21.500 108.00 29.7000 12.0000 1.50000 9.0000 55.00 Y N
SPR24_REP 24.400 22.500 118.00 35.6000 12.0000 1.50000 9.0000 60.00 Y N
SPR25_REP 14.000 13.500 216.00 16.0000 13.0000 1.80000 9.4000 30.00 Y N
SPR26_REP 22.400 17.500 206.00 17.6000 14.0000 2.00000 10.0000 40.00 Y N
SPR27_REP 25.000 22.500 245.00 25.0000 14.0000 2.00000 10.0000 50.00 Y N
SPR28_REP 65.000 58.000 1320.00 18.0000 18.0000 4.00000 10.0000 83.00 Y N
SPR29_REP 27.000 25.000 1330.00 8.0000 19.0000 4.00000 11.0000 35.00 Y N
SPR30_REP 22.000 17.800 226.00 18.0000 15.2000 2.10000 11.0000 40.00 Y N
SPR31_REP 30.000 20.000 220.00 20.0000 15.2000 2.10000 11.0000 50.00 Y N
SPR32_REP 36.000 24.200 211.00 24.0000 15.2000 2.10000 11.0000 60.00 Y N
SPR33_REP 42.000 26.300 224.00 28.0000 15.5000 2.10000 11.0000 70.00 Y N
SPR34_REP 48.000 30.500 217.00 32.0000 15.2000 2.10000 11.0000 80.00 Y N
SPR35_REP 54.000 34.700 211.00 36.0000 15.2000 2.10000 11.0000 90.00 Y N
SPR36_REP 31.000 28.500 481.00 14.0000 17.5000 3.00000 11.5000 45.00 Y N
SPR37_REP 34.000 31.500 471.00 16.0000 17.5000 3.00000 11.5000 50.00 Y N
SPR38_REP 41.000 32.500 260.00 44.0000 17.0000 2.25000 12.5000 85.00 Y N
SPR39_REP 29.000 27.500 1630.00 6.0000 23.0000 5.00000 13.0000 35.00 Y N
SPR40_REP 28.000 24.500 736.00 12.0000 20.0000 3.50000 13.0000 40.00 Y N
SPR41_REP 31.400 29.400 245.00 38.6000 17.5000 2.25000 13.0000 70.00 Y N
SPR42_REP 48.000 46.400 1960.00 12.0000 24.0000 5.30000 13.4000 60.00 Y N
SPR43_REP 34.400 31.500 1140.00 15.6000 21.5000 4.00000 13.5000 50.00 Y N
SPR44_REP 59.000 56.000 4600.00 11.0000 27.8000 7.00000 13.8000 70.00 Y N
SPR45_REP 24.000 20.800 419.00 12.0000 21.4000 3.20000 15.0000 36.00 Y N
SPR46_REP 20.000 16.250 294.00 20.0000 20.0000 2.50000 15.0000 40.00 Y N
SPR47_REP 37.600 32.500 1180.00 7.4000 25.0000 5.00000 15.0000 45.00 Y N
SPR48_REP 27.800 25.500 451.00 22.2000 21.0000 3.00000 15.0000 50.00 Y N
SPR49_REP 34.700 32.000 392.00 25.3000 21.0000 3.00000 15.0000 60.00 Y N
Instance Name L_N L_C F_N S_N D_ECOIL_
DD_I L_O CYL Spring
HASCO METRIC SPRINGS
Mold Base Library 25 - 3
SPR50_REP 41.100 38.000 367.00 28.9000 21.0000 3.00000 15.0000 70.00 Y N
SPR51_REP 47.500 44.000 349.00 32.5000 21.0000 3.00000 15.0000 80.00 Y N
SPR52_REP 23.600 21.000 540.00 21.4000 21.5000 3.00000 15.5000 45.00 Y N
SPR53_REP 21.000 18.000 841.00 9.0000 25.0000 4.00000 17.0000 30.00 Y N
SPR54_REP 103.000 99.000 2400.00 33.0000 29.0000 6.00000 17.0000 136.00 Y N
SPR55_REP 27.600 25.000 981.00 8.5000 30.0000 5.00000 20.0000 36.00 Y N
SPR56_REP 27.000 26.000 883.00 23.0000 28.0000 4.00000 20.0000 50.00 Y N
SPR57_REP 65.600 60.000 1450.00 16.4000 32.0000 6.00000 20.0000 82.00 Y N
SPR58_REP 72.200 66.000 1560.00 19.8000 32.0000 6.00000 20.0000 92.00 Y N
SPR59_REP 78.600 72.000 1670.00 23.4000 32.0000 6.00000 20.0000 102.00 Y N
SPR60_REP 85.300 78.000 1690.00 26.7000 32.0000 6.00000 20.0000 112.00 Y N
SPR61_REP 91.800 84.000 1810.00 30.2000 32.0000 6.00000 20.0000 122.00 Y N
SPR62_REP 98.300 90.000 1880.00 33.7000 32.0000 6.00000 20.0000 132.00 Y N
SPR63_REP 104.900 96.000 1920.00 37.1000 32.0000 6.00000 20.0000 142.00 Y N
SPR64_REP 111.400 102.000 1960.00 40.6000 32.0000 6.00000 20.0000 152.00 Y N
SPR65_REP 118.000 108.000 2010.00 44.0000 32.0000 6.00000 20.0000 162.00 Y N
SPR66_REP 130.000 119.000 1930.00 47.0000 32.0000 6.00000 20.0000 177.00 Y N
SPR67_REP 152.800 140.000 1700.00 49.2000 32.0000 6.00000 20.0000 202.00 Y N
SPR68_REP 168.100 154.000 1610.00 51.9000 32.0000 6.00000 20.0000 220.00 Y N
SPR69_REP 33.000 24.800 728.00 13.0000 31.0000 4.50000 22.0000 46.00 Y N
SPR70_REP 36.000 32.000 804.00 34.0000 30.0000 4.00000 22.0000 70.00 Y N
SPR71_REP 35.300 31.500 491.00 40.7000 29.0000 3.50000 22.0000 76.00 Y N
SPR72_REP 47.300 40.400 883.00 28.7000 33.5000 4.75000 24.0000 76.00 Y N
SPR73_REP 41.000 36.000 1340.00 15.0000 38.0000 6.00000 26.0000 56.00 Y N
SPR74_REP 84.000 80.500 1900.00 28.0000 40.0000 7.00000 26.0000 112.00 Y N
SPR75_REP 100.000 87.500 1970.00 32.0000 40.0000 7.00000 26.0000 132.00 Y N
SPR76_REP 114.000 101.500 1980.00 38.0000 40.0000 7.00000 26.0000 152.00 Y N
SPR77_REP 129.000 115.500 1940.00 43.0000 40.0000 7.00000 26.0000 172.00 Y N
SPR78_REP 144.000 129.500 1910.00 48.0000 40.0000 7.00000 26.0000 192.00 Y N
SPR79_REP 160.000 136.500 1960.00 52.0000 40.0000 7.00000 26.0000 212.00 Y N
SPR80_REP 58.600 56.000 2940.00 21.4000 46.0000 8.00000 30.0000 80.00 Y N
SPR81_REP 45.200 42.700 4410.00 14.8000 50.0000 9.00000 32.0000 60.00 Y N
SPR82_REP 98.500 91.000 3190.00 43.5000 48.4000 8.20000 32.0000 142.00 Y N
SPR83_REP 138.000 127.000 3060.00 44.0000 49.6000 8.80000 32.0000 182.00 Y N
Instance Name L_N L_C F_N S_N D_ECOIL_
DD_I L_O CYL Spring
HASCO METRIC SPRINGS
25 - 4 Mold Base Library
SPR84_REP 152.400 140.000 3300.00 47.6000 50.0000 9.00000 32.0000 200.00 Y N
SPR85_REP 171.300 157.000 3400.00 50.7000 50.4000 9.20000 32.0000 222.00 Y N
SPR86_REP 209.900 192.000 3260.00 52.1000 51.0000 9.50000 32.0000 262.00 Y N
SPR87_REP 76.600 71.200 3920.00 23.4000 53.0000 9.50000 34.0000 100.00 Y N
SPR88_REP 35.000 34.000 1820.00 15.0000 58.0000 8.00000 42.0000 50.00 Y N
SPR1 6.500 5.250 10.80 2.2000 3.0000 0.50000 2.0000 8.70 N Y
SPR2 7.500 6.600 38.50 3.5000 3.2600 0.63000 2.0000 11.00 N Y
SPR3 10.300 9.150 38.50 5.2000 3.2600 0.63000 2.0000 15.50 N Y
SPR4 12.800 10.250 28.50 4.7000 3.2600 0.63000 2.0000 17.50 N Y
SPR5 7.000 6.000 32.40 2.7000 4.8000 0.80000 3.2000 9.70 N Y
SPR6 13.500 11.600 32.40 6.0000 4.8000 0.80000 3.2000 19.50 N Y
SPR7 9.000 8.400 108.00 3.0000 6.0000 1.20000 3.6000 12.00 N Y
SPR8 9.000 7.500 44.10 3.0000 6.0000 1.00000 4.0000 12.00 N Y
SPR9 24.600 20.500 44.10 9.9000 6.0000 1.00000 4.0000 34.50 N Y
SPR10 5.750 4.500 39.20 4.2500 6.8000 0.90000 5.0000 10.00 N Y
SPR11 9.800 9.400 133.00 7.2000 7.5000 1.25000 5.0000 17.00 N Y
SPR12 13.800 13.150 133.00 11.2000 7.5000 1.25000 5.0000 25.00 N Y
SPR13 10.000 9.200 136.00 5.0000 8.0000 1.40000 5.2000 15.00 N Y
SPR14 21.000 20.000 446.00 4.0000 12.0000 2.70000 6.6000 25.00 N Y
SPR15 9.300 8.400 182.50 8.7000 10.0000 1.50000 7.0000 18.00 N Y
SPR16 10.100 7.500 33.40 8.9000 9.0000 1.00000 7.0000 19.00 N Y
SPR17 14.000 13.500 314.00 6.0000 11.2000 2.10000 7.0000 20.00 N Y
SPR18 21.500 18.750 141.00 18.5000 10.0000 1.50000 7.0000 40.00 N Y
SPR19 15.000 12.750 177.00 10.0000 11.0000 1.70000 7.6000 25.00 N Y
SPR20 7.700 6.900 85.30 12.3000 11.2000 1.25000 8.7000 20.00 N Y
SPR21 21.100 18.150 85.30 42.9000 11.2000 1.25000 8.7000 64.00 N Y
SPR22 22.000 19.200 147.00 28.0000 12.2000 1.60000 9.0000 50.00 N Y
SPR23 25.300 21.500 108.00 29.7000 12.0000 1.50000 9.0000 55.00 N Y
SPR24 24.400 22.500 118.00 35.6000 12.0000 1.50000 9.0000 60.00 N Y
SPR25 14.000 13.500 216.00 16.0000 13.0000 1.80000 9.4000 30.00 N Y
SPR26 22.400 17.500 206.00 17.6000 14.0000 2.00000 10.0000 40.00 N Y
SPR27 25.000 22.500 245.00 25.0000 14.0000 2.00000 10.0000 50.00 N Y
SPR28 65.000 58.000 1320.00 18.0000 18.0000 4.00000 10.0000 83.00 N Y
SPR29 27.000 25.000 1330.00 8.0000 19.0000 4.00000 11.0000 35.00 N Y
Instance Name L_N L_C F_N S_N D_ECOIL_
DD_I L_O CYL Spring
HASCO METRIC SPRINGS
Mold Base Library 25 - 5
SPR30 22.000 17.800 226.00 18.0000 15.2000 2.10000 11.0000 40.00 N Y
SPR31 30.000 20.000 220.00 20.0000 15.2000 2.10000 11.0000 50.00 N Y
SPR32 36.000 24.200 211.00 24.0000 15.2000 2.10000 11.0000 60.00 N Y
SPR33 42.000 26.300 224.00 28.0000 15.5000 2.10000 11.0000 70.00 N Y
SPR34 48.000 30.500 217.00 32.0000 15.2000 2.10000 11.0000 80.00 N Y
SPR35 54.000 34.700 211.00 36.0000 15.2000 2.10000 11.0000 90.00 N Y
SPR36 31.000 28.500 481.00 14.0000 17.5000 3.00000 11.5000 45.00 N Y
SPR37 34.000 31.500 471.00 16.0000 17.5000 3.00000 11.5000 50.00 N Y
SPR38 41.000 32.500 260.00 44.0000 17.0000 2.25000 12.5000 85.00 N Y
SPR39 29.000 27.500 1630.00 6.0000 23.0000 5.00000 13.0000 35.00 N Y
SPR40 28.000 24.500 736.00 12.0000 20.0000 3.50000 13.0000 40.00 N Y
SPR41 31.400 29.400 245.00 38.6000 17.5000 2.25000 13.0000 70.00 N Y
SPR42 48.000 46.400 1960.00 12.0000 24.0000 5.30000 13.4000 60.00 N Y
SPR43 34.400 31.500 1140.00 15.6000 21.5000 4.00000 13.5000 50.00 N Y
SPR44 59.000 56.000 4600.00 11.0000 27.8000 7.00000 13.8000 70.00 N Y
SPR45 24.000 20.800 419.00 12.0000 21.4000 3.20000 15.0000 36.00 N Y
SPR46 20.000 16.250 294.00 20.0000 20.0000 2.50000 15.0000 40.00 N Y
SPR47 37.600 32.500 1180.00 7.4000 25.0000 5.00000 15.0000 45.00 N Y
SPR48 27.800 25.500 451.00 22.2000 21.0000 3.00000 15.0000 50.00 N Y
SPR49 34.700 32.000 392.00 25.3000 21.0000 3.00000 15.0000 60.00 N Y
SPR50 41.100 38.000 367.00 28.9000 21.0000 3.00000 15.0000 70.00 N Y
SPR51 47.500 44.000 349.00 32.5000 21.0000 3.00000 15.0000 80.00 N Y
SPR52 23.600 21.000 540.00 21.4000 21.5000 3.00000 15.5000 45.00 N Y
SPR53 21.000 18.000 841.00 9.0000 25.0000 4.00000 17.0000 30.00 N Y
SPR54 103.000 99.000 2400.00 33.0000 29.0000 6.00000 17.0000 136.00 N Y
SPR55 27.600 25.000 981.00 8.5000 30.0000 5.00000 20.0000 36.00 N Y
SPR56 27.000 26.000 883.00 23.0000 28.0000 4.00000 20.0000 50.00 N Y
SPR57 65.600 60.000 1450.00 16.4000 32.0000 6.00000 20.0000 82.00 N Y
SPR58 72.200 66.000 1560.00 19.8000 32.0000 6.00000 20.0000 92.00 N Y
SPR59 78.600 72.000 1670.00 23.4000 32.0000 6.00000 20.0000 102.00 N Y
SPR60 85.300 78.000 1690.00 26.7000 32.0000 6.00000 20.0000 112.00 N Y
SPR61 91.800 84.000 1810.00 30.2000 32.0000 6.00000 20.0000 122.00 N Y
SPR62 98.300 90.000 1880.00 33.7000 32.0000 6.00000 20.0000 132.00 N Y
SPR63 104.900 96.000 1920.00 37.1000 32.0000 6.00000 20.0000 142.00 N Y
Instance Name L_N L_C F_N S_N D_ECOIL_
DD_I L_O CYL Spring
HASCO METRIC SPRINGS
25 - 6 Mold Base Library
SPR64 111.400 102.000 1960.00 40.6000 32.0000 6.00000 20.0000 152.00 N Y
SPR65 118.000 108.000 2010.00 44.0000 32.0000 6.00000 20.0000 162.00 N Y
SPR66 130.000 119.000 1930.00 47.0000 32.0000 6.00000 20.0000 177.00 N Y
SPR67 152.800 140.000 1700.00 49.2000 32.0000 6.00000 20.0000 202.00 N Y
SPR68 168.100 154.000 1610.00 51.9000 32.0000 6.00000 20.0000 220.00 N Y
SPR69 33.000 24.800 728.00 13.0000 31.0000 4.50000 22.0000 46.00 N Y
SPR70 36.000 32.000 804.00 34.0000 30.0000 4.00000 22.0000 70.00 N Y
SPR71 35.300 31.500 491.00 40.7000 29.0000 3.50000 22.0000 76.00 N Y
SPR72 47.300 40.400 883.00 28.7000 33.5000 4.75000 24.0000 76.00 N Y
SPR73 41.000 36.000 1340.00 15.0000 38.0000 6.00000 26.0000 56.00 N Y
SPR74 84.000 80.500 1900.00 28.0000 40.0000 7.00000 26.0000 112.00 N Y
SPR75 100.000 87.500 1970.00 32.0000 40.0000 7.00000 26.0000 132.00 N Y
SPR76 114.000 101.500 1980.00 38.0000 40.0000 7.00000 26.0000 152.00 N Y
SPR77 129.000 115.500 1940.00 43.0000 40.0000 7.00000 26.0000 172.00 N Y
SPR78 144.000 129.500 1910.00 48.0000 40.0000 7.00000 26.0000 192.00 N Y
SPR79 160.000 136.500 1960.00 52.0000 40.0000 7.00000 26.0000 212.00 N Y
SPR80 58.600 56.000 2940.00 21.4000 46.0000 8.00000 60.0000 80.00 N Y
SPR81 45.200 42.700 4410.00 14.8000 50.0000 9.00000 32.0000 60.00 N Y
SPR82 98.500 91.000 3190.00 43.5000 48.4000 8.20000 32.0000 142.00 N Y
SPR83 138.000 127.000 3060.00 44.0000 49.6000 8.80000 32.0000 182.00 N Y
SPR84 152.400 140.000 3300.00 47.6000 50.0000 9.00000 32.0000 200.00 N Y
SPR85 171.300 157.000 3400.00 50.7000 50.4000 9.20000 32.0000 222.00 N Y
SPR86 209.900 192.000 3260.00 52.1000 51.0000 9.50000 32.0000 262.00 N Y
SPR87 76.600 71.200 3920.00 23.4000 53.0000 9.50000 34.0000 100.00 N Y
SPR88 35.000 34.000 1820.00 15.0000 58.0000 8.00000 42.0000 50.00 N Y
Instance Name L_N L_C F_N S_N D_ECOIL_
DD_I L_O CYL Spring
HASCO METRIC SPRINGS
Mold Base Library 25 - 7
SPRING, CATALOG NO. Z64
Generic Part Name: Z64
Instance Name L_N L_C F_N S_N D_E A D_I L_O CYL Spring
SQR_SPR1_REP 12.6000 11.5000 167.00 7.4000 10.0000 1.50000 7.0000 20.00 Y N
SQR_SPR2_REP 14.2000 13.5000 284.00 5.8000 11.5000 2.00000 7.5000 20.00 Y N
SQR_SPR3_REP 37.5000 33.0000 412.00 12.5000 14.0000 2.50000 9.0000 50.00 Y N
SQR_SPR4_REP 21.6000 19.8000 510.00 10.4000 14.5000 2.50000 9.5000 32.00 Y N
SQR_SPR5_REP 37.8000 35.5000 1570.00 7.2000 17.5000 4.00000 9.5000 45.00 Y N
SQR_SPR6_REP 39.4000 36.5000 1720.00 10.6000 19.0000 4.00000 11.0000 50.00 Y N
SQR_SPR7_REP 35.2000 32.5000 1570.00 9.8000 19.5000 4.00000 11.5000 45.00 Y N
SQR_SPR8_REP 34.0000 32.0000 1280.00 11.0000 21.0000 4.00000 13.0000 45.00 Y N
SQR_SPR9_REP 40.2000 37.0000 2940.00 4.8000 26.0000 6.00000 14.0000 45.00 Y N
SQR_SPR10_REP 83.5000 81.0000 5300.00 14.5000 28.0000 7.00000 14.0000 98.00 Y N
SQR_SPR11_REP 58.4000 55.0000 1100.00 24.6000 23.0000 4.00000 15.0000 83.00 Y N
SQR_SPR12_REP 55.5000 53.0000 4610.00 16.5000 42.0000 8.00000 26.0000 72.00 Y N
SQR_SPR1 12.6000 11.5000 167.00 7.4000 10.0000 1.50000 7.0000 20.00 N Y
SQR_SPR2 14.2000 13.5000 284.00 5.8000 11.5000 2.00000 7.5000 20.00 N Y
SQR_SPR3 37.5000 33.0000 412.00 12.5000 14.0000 2.50000 9.0000 50.00 N Y
HASCO METRIC SPRINGS
25 - 8 Mold Base Library
SQR_SPR4 21.6000 19.8000 510.00 10.4000 14.5000 2.50000 9.5000 32.00 N Y
SQR_SPR5 37.8000 35.5000 1570.00 7.2000 17.5000 4.00000 9.5000 45.00 N Y
SQR_SPR6 39.4000 36.5000 1720.00 10.6000 19.0000 4.00000 11.0000 50.00 N Y
SQR_SPR7 35.2000 32.5000 1570.00 9.8000 19.5000 4.00000 11.5000 45.00 N Y
SQR_SPR8 34.0000 32.0000 1280.00 11.0000 21.0000 4.00000 13.0000 45.00 N Y
SQR_SPR9 40.2000 37.0000 2940.00 4.8000 26.0000 6.00000 14.0000 45.00 N Y
SQR_SPR10 83.5000 81.0000 5300.00 14.5000 28.0000 7.00000 14.0000 98.00 N Y
SQR_SPR11 58.4000 55.0000 1100.00 24.6000 23.0000 4.00000 15.0000 83.00 N Y
SQR_SPR12 55.5000 53.0000 4610.00 16.5000 42.0000 8.00000 26.0000 72.00 N Y
Instance Name L_N L_C F_N S_N D_E A D_I L_O CYL Spring
Mold Base Library 26 - 1
11HASCO METRIC SPRUE BUSHINGS
SPRUE BUSHING, CATALOG NO. Z51
Generic Part Name: Z51
Notes
1. “*” denotes a non-existent value.
InstanceName
d_2 l d_1 r d k Cut
Z51_010 18.00 27.0000 3.5000 15.50 38.00 18.0000 Y
Z51_011 18.00 36.0000 3.5000 15.50 38.00 18.0000 Y
Z51_012 18.00 46.0000 3.5000 15.50 38.00 18.0000 Y
Z51_013 18.00 56.0000 3.5000 15.50 38.00 18.0000 Y
Z51_014 18.00 27.0000 4.5000 15.50 38.00 18.0000 Y
Z51_015 18.00 36.0000 4.5000 15.50 38.00 18.0000 Y
Z51_016 18.00 46.0000 4.5000 15.50 38.00 18.0000 Y
Z51_017 18.00 56.0000 4.5000 15.50 38.00 18.0000 Y
HASCO METRIC SPRUE BUSHINGS
26 - 2 Mold Base Library
Z51_018 18.00 76.0000 4.5000 15.50 38.00 18.0000 Y
Z51_019 24.00 46.0000 4.5000 15.50 48.00 23.0000 Y
Z51_020 24.00 56.0000 4.5000 15.50 48.00 23.0000 Y
Z51_021 24.00 76.0000 4.5000 15.50 48.00 23.0000 Y
Z51_022 24.00 56.0000 6.5000 15.50 48.00 23.0000 Y
Z51_023 24.00 76.0000 6.5000 15.50 48.00 23.0000 Y
Z51_024 18.00 27.0000 3.5000 40.00 38.00 18.0000 Y
Z51_025 18.00 36.0000 3.5000 40.00 38.00 18.0000 Y
Z51_026 18.00 46.0000 3.5000 40.00 38.00 18.0000 Y
Z51_027 18.00 56.0000 3.5000 40.00 38.00 18.0000 Y
Z51_028 18.00 27.0000 4.5000 40.00 38.00 18.0000 Y
Z51_029 18.00 36.0000 4.5000 40.00 38.00 18.0000 Y
Z51_030 18.00 46.0000 4.5000 40.00 38.00 18.0000 Y
Z51_031 18.00 56.0000 4.5000 40.00 38.00 18.0000 Y
Z51_032 18.00 76.0000 4.5000 40.00 38.00 18.0000 Y
Z51_033 24.00 46.0000 4.5000 40.00 48.00 23.0000 Y
Z51_034 24.00 56.0000 4.5000 40.00 48.00 23.0000 Y
Z51_035 24.00 76.0000 4.5000 40.00 48.00 23.0000 Y
Z51_036 24.00 56.0000 6.5000 40.00 48.00 23.0000 Y
Z51_037 24.00 76.0000 6.5000 40.00 48.00 23.0000 Y
Z51_038 18.00 27.0000 3.5000 * 38.00 18.0000 N
Z51_039 18.00 36.0000 3.5000 * 38.00 18.0000 N
Z51_040 18.00 46.0000 3.5000 * 38.00 18.0000 N
Z51_041 18.00 56.0000 3.5000 * 38.00 18.0000 N
Z51_042 18.00 27.0000 4.5000 * 38.00 18.0000 N
Z51_043 18.00 36.0000 4.5000 * 38.00 18.0000 N
Z51_044 18.00 46.0000 4.5000 * 38.00 18.0000 N
Z51_045 18.00 56.0000 4.5000 * 38.00 18.0000 N
Z51_046 18.00 76.0000 4.5000 * 38.00 18.0000 N
Z51_047 24.00 46.0000 4.5000 * 48.00 23.0000 N
InstanceName
d_2 l d_1 r d k Cut
HASCO METRIC SPRUE BUSHINGS
Mold Base Library 26 - 3
Z51_048 24.00 56.0000 4.5000 * 48.00 23.0000 N
Z51_049 24.00 76.0000 4.5000 * 48.00 23.0000 N
Z51_050 24.00 56.0000 6.5000 * 48.00 23.0000 N
Z51_051 24.00 76.0000 6.5000 * 48.00 23.0000 N
InstanceName
d_2 l d_1 r d k Cut
HASCO METRIC SPRUE BUSHINGS
26 - 4 Mold Base Library
SPRUE BUSHING, CATALOG NO. Z511
Generic Part Name: Z511
Notes
1. “*” denotes a non-existent value.
InstanceName
d_2 l d_1 r d k t Cut
Z511_010 12.00 22.0000 2.5000 15.50 28.00 13.0000 1.5000 Y
Z511_011 12.00 27.0000 2.5000 15.50 28.00 13.0000 1.5000 Y
Z511_012 12.00 36.0000 2.5000 15.50 28.00 13.0000 1.5000 Y
Z511_013 12.00 46.0000 2.5000 15.50 28.00 13.0000 1.5000 Y
Z511_014 12.00 22.0000 3.5000 15.50 28.00 13.0000 1.5000 Y
Z511_015 12.00 27.0000 3.5000 15.50 28.00 13.0000 1.5000 Y
Z511_016 12.00 36.0000 3.5000 15.50 28.00 13.0000 1.5000 Y
Z511_017 12.00 46.0000 3.5000 15.50 28.00 13.0000 1.5000 Y
Z511_018 12.00 56.0000 3.5000 15.50 28.00 13.0000 1.5000 Y
HASCO METRIC SPRUE BUSHINGS
Mold Base Library 26 - 5
Z511_019 18.00 27.0000 3.0000 15.50 38.00 18.0000 3.0000 Y
Z511_020 18.00 36.0000 3.0000 15.50 38.00 18.0000 3.0000 Y
Z511_021 18.00 46.0000 3.0000 15.50 38.00 18.0000 3.0000 Y
Z511_022 18.00 56.0000 3.0000 15.50 38.00 18.0000 3.0000 Y
Z511_023 18.00 76.0000 3.0000 15.50 38.00 18.0000 3.0000 Y
Z511_024 18.00 96.0000 3.0000 15.50 38.00 18.0000 3.0000 Y
Z511_025 18.00 116.0000 3.0000 15.50 38.00 18.0000 3.0000 Y
Z511_026 18.00 27.0000 4.0000 15.50 38.00 18.0000 3.0000 Y
Z511_027 18.00 36.0000 4.0000 15.50 38.00 18.0000 3.0000 Y
Z511_028 18.00 46.0000 4.0000 15.50 38.00 18.0000 3.0000 Y
Z511_029 18.00 56.0000 4.0000 15.50 38.00 18.0000 3.0000 Y
Z511_030 18.00 76.0000 4.0000 15.50 38.00 18.0000 3.0000 Y
Z511_031 18.00 96.0000 4.0000 15.50 38.00 18.0000 3.0000 Y
Z511_032 18.00 116.0000 4.0000 15.50 38.00 18.0000 3.0000 Y
Z511_033 12.00 22.0000 2.5000 40.00 28.00 13.0000 1.5000 Y
Z511_034 12.00 27.0000 2.5000 40.00 28.00 13.0000 1.5000 Y
Z511_035 12.00 36.0000 2.5000 40.00 28.00 13.0000 1.5000 Y
Z511_036 12.00 46.0000 2.5000 40.00 28.00 13.0000 1.5000 Y
Z511_037 12.00 22.0000 3.5000 40.00 28.00 13.0000 1.5000 Y
Z511_038 12.00 27.0000 3.5000 40.00 28.00 13.0000 1.5000 Y
Z511_039 12.00 36.0000 3.5000 40.00 28.00 13.0000 1.5000 Y
Z511_040 12.00 46.0000 3.5000 40.00 28.00 13.0000 1.5000 Y
Z511_041 12.00 56.0000 3.5000 40.00 28.00 13.0000 1.5000 Y
Z511_042 18.00 27.0000 3.0000 40.00 38.00 18.0000 3.0000 Y
Z511_043 18.00 36.0000 3.0000 40.00 38.00 18.0000 3.0000 Y
Z511_044 18.00 46.0000 3.0000 40.00 38.00 18.0000 3.0000 Y
Z511_045 18.00 56.0000 3.0000 40.00 38.00 18.0000 3.0000 Y
Z511_046 18.00 76.0000 3.0000 40.00 38.00 18.0000 3.0000 Y
Z511_047 18.00 96.0000 3.0000 40.00 38.00 18.0000 3.0000 Y
Z511_048 18.00 116.0000 3.0000 40.00 38.00 18.0000 3.0000 Y
InstanceName
d_2 l d_1 r d k t Cut
HASCO METRIC SPRUE BUSHINGS
26 - 6 Mold Base Library
Z511_049 18.00 27.0000 3.0000 40.00 38.00 18.0000 3.0000 Y
Z511_050 18.00 36.0000 3.0000 40.00 38.00 18.0000 3.0000 Y
Z511_051 18.00 46.0000 3.0000 40.00 38.00 18.0000 3.0000 Y
Z511_052 18.00 56.0000 3.0000 40.00 38.00 18.0000 3.0000 Y
Z511_053 18.00 76.0000 3.0000 40.00 38.00 18.0000 3.0000 Y
Z511_054 18.00 96.0000 3.0000 40.00 38.00 18.0000 3.0000 Y
Z511_055 18.00 116.0000 3.0000 40.00 38.00 18.0000 3.0000 Y
Z511_056 12.00 22.0000 2.5000 * 28.00 13.0000 * N
Z511_057 12.00 27.0000 2.5000 * 28.00 13.0000 * N
Z511_058 12.00 36.0000 2.5000 * 28.00 13.0000 * N
Z511_059 12.00 46.0000 2.5000 * 28.00 13.0000 * N
Z511_060 12.00 22.0000 3.5000 * 28.00 13.0000 * N
Z511_061 12.00 27.0000 3.5000 * 28.00 13.0000 * N
Z511_062 12.00 36.0000 3.5000 * 28.00 13.0000 * N
Z511_063 12.00 46.0000 3.5000 * 28.00 13.0000 * N
Z511_064 12.00 56.0000 3.5000 * 28.00 13.0000 * N
Z511_065 18.00 27.0000 3.0000 * 38.00 18.0000 * N
Z511_066 18.00 36.0000 3.0000 * 38.00 18.0000 * N
Z511_067 18.00 46.0000 3.0000 * 38.00 18.0000 * N
Z511_068 18.00 56.0000 3.0000 * 38.00 18.0000 * N
Z511_069 18.00 76.0000 3.0000 * 38.00 18.0000 * N
Z511_070 18.00 96.0000 3.0000 * 38.00 18.0000 * N
Z511_071 18.00 116.0000 3.0000 * 38.00 18.0000 * N
Z511_072 18.00 27.0000 4.0000 * 38.00 18.0000 * N
Z511_073 18.00 36.0000 4.0000 * 38.00 18.0000 * N
Z511_074 18.00 46.0000 4.0000 * 38.00 18.0000 * N
Z511_075 18.00 56.0000 4.0000 * 38.00 18.0000 * N
Z511_076 18.00 76.0000 4.0000 * 38.00 18.0000 * N
Z511_077 18.00 96.0000 4.0000 * 38.00 18.0000 * N
Z511_078 18.00 116.0000 4.0000 * 38.00 18.0000 * N
InstanceName
d_2 l d_1 r d k t Cut
Mold Base Library 27 - 1
27FUTABA METRIC MOLD BASE ASSEMBLIES
The FUTABA metric mold base library is a database of parts and assemblies that you canretrieve when you are designing metric molds in Pro/ENGINEER. All Pro/ENGINEERassemblies and parts in the library are created to the specifications listed in the FUTABACorporation catalog.
NOTE: You do not have to create a search path for these assembliesin the config.pro file.
LIBRARY ORGANIZATION
The FUTABA mold library contains two subdirectories:
• assy_fm—Contains mold base assemblies.• comp_fm—Contains component parts of the mold bases.
In general, the names for assemblies and their component parts are thesame as their corresponding catalog names in the FUTABA catalog.Generally, hyphens and spaces have been omitted or changed tounderscores to make the catalog numbers and instance names valid foruse in Pro/ENGINEER.
Four series of metric mold bases are available for selection in theassy_fm directory:
• FSAA• FSBA• FSCA• FSDA
Figures 27-1 to 27-4 show these mold base assembly series.
FUTABA METRIC MOLD BASE ASSEMBLIES
27 - 2 Mold Base Library
Figure 27-1Series FSAA Metric Mold Base Assembly
In Figure 27-1, the “O” stands for the offset between the plates. If youopen the mold base assembly, you can modify the offsets.
Assemblies of the FSAA metric mold base series include thefollowing:
• Two clamping plates (T and L)• One cavity plate (A)• One core plate (B)• One support plate (U)• One spacer block (C)• Two ejector plates (E and F)
FUTABA METRIC MOLD BASE ASSEMBLIES
Mold Base Library 27 - 3
Figure 27-2Series FSBA Metric Mold Base Assembly
.
In Figure 27-2, the “0” stands for the offset between the plates. If youopen the mold base assembly, you can modify the offsets.
Assemblies of the FSBA metric mold base series include thefollowing:
• Two clamping plates (T and L)• One cavity plate (A)• One stripper plate (S)• One core plate (B)• One support plate (U)• One spacer block (C)• Two ejector plates (F and E)
FUTABA METRIC MOLD BASE ASSEMBLIES
27 - 4 Mold Base Library
Figure 27-3Series FSCA Metric Mold Base Assembly
.
In Figure 27-3, the “0” stands for the offset between the plates. If youopen the mold base assembly, you can modify the offsets.
Assemblies of the FSCA metric mold base series include thefollowing:
• Two clamping plates (T and L)• One cavity plate (A)• One core plate (B)• One spacer block (C)• Two ejector plates (F and E)
FUTABA METRIC MOLD BASE ASSEMBLIES
Mold Base Library 27 - 5
Figure 27-4Series FSDA Metric Mold Base Assembly
.
In Figure 27-4, the “0” stands for the offset between the plates. If youopen the mold base assembly, you can modify the offsets.
Assemblies of the FSDA metric mold base series include thefollowing:
• Two clamping plates (T and E)• One cavity plate (A)• One stripper plate (S)• One core plate (B)• One spacer block (C)• Two ejector plates (E and F)
FUTABA METRIC MOLD BASE ASSEMBLIES
27 - 6 Mold Base Library
RETRIEVING ASSEMBLIES FROM THE LIBRARY
After you select one of the four mold base assembly series, you canretrieve the generic assembly or a particular instance (that is, aparticular size) of the assembly series. Sizes for the four series of moldbases can be specified from 110x130 mm to 700x800 mm. SeeTABLE OF MOLD BASE AND PLATE SIZES for a complete list ofthe mold base sizes.
After you select the particular size mold base to use, you can retrievethe generic mold base or assemble an instance of the mold base.Assembling an instance allows you to specify sizes for the mold’sindividual plates to create a customized mold.See TABLE OF MOLDBASE AND PLATE SIZES for a list of plate sizes that can bespecified for a particular size mold base.
TABLE OF MOLD BASE AND PLATE SIZES
In the following table, all the dimensions are expressed in millimeters.
110x130
PLATE THICKNESS Top Clamping Plate (T) 15
Cavity Plate (A) 20 to 60
Stripper Plate (S) 10
Core Plate (B) 20 to 60
Support Plate (U) 25 to 30
Spacer Block (C) 40 to 50
Ejector Retainer Plate (E) 13
Ejector Plate (F) 13
Bottom Clamping Plate (L) 15
130x130
PLATE THICKNESS Top Clamping Plate (T) 15
Cavity Plate (A) 20 to 60
Stripper Plate (S) 10
Core Plate (B) 20 to 60
Support Plate (U) 25 to 30
Spacer Block (C) 40 to 50
Ejector Retainer Plate (E) 13
Ejector Plate (F) 13
Bottom Clamping Plate (L) 15
FUTABA METRIC MOLD BASE ASSEMBLIES
Mold Base Library 27 - 7
130x150
PLATE THICKNESS Top Clamping Plate (T) 15
Cavity Plate (A) 20 to 60
Stripper Plate (S) 10
Core Plate (B) 20 to 60
Support Plate (U) 25 to 30
Spacer Block (C) 40 to 50
Ejector Retainer Plate (E) 13
Ejector Plate (F) 13
Bottom Clamping Plate (L) 15
150x150
PLATE THICKNESS Top Clamping Plate (T) 20
Cavity Plate (A) 20 to 80
Stripper Plate (S) 15
Core Plate (B) 20 to 80
Support Plate (U) 30 to 40
Spacer Block (C) 50 to 80
Ejector Retainer Plate (E) 13
Ejector Plate (F) 15
Bottom Clamping Plate (L) 20
150x180
PLATE THICKNESS Top Clamping Plate (T) 20
Cavity Plate (A) 20 to 80
Stripper Plate (S) 15
Core Plate (B) 20 to 80
Support Plate (U) 30 to 40
Spacer Block (C) 50 to 80
Ejector Retainer Plate (E) 13
Ejector Plate (F) 15
Bottom Clamping Plate (L) 20
FUTABA METRIC MOLD BASE ASSEMBLIES
27 - 8 Mold Base Library
150x200
PLATE THICKNESS Top Clamping Plate (T) 20
Cavity Plate (A) 20 to 80
Stripper Plate (S) 15
Core Plate (B) 20 to 80
Support Plate (U) 30 to 40
Spacer Block (C) 50 to 80
Ejector Retainer Plate (E) 13
Ejector Plate (F) 15
Bottom Clamping Plate (L) 20
150x230
PLATE THICKNESS Top Clamping Plate (T) 20
Cavity Plate (A) 20 to 80
Stripper Plate (S) 15
Core Plate (B) 20 to 80
Support Plate (U) 30 to 40
Spacer Block (C) 50 to 80
Ejector Retainer Plate (E) 13
Ejector Plate (F) 15
Bottom Clamping Plate (L) 20
150x250
PLATE THICKNESS Top Clamping Plate (T) 20
Cavity Plate (A) 20 to 80
Stripper Plate (S) 15
Core Plate (B) 20 to 80
Support Plate (U) 30 to 40
Spacer Block (C) 50 to 80
Ejector Retainer Plate (E) 13
Ejector Plate (F) 15
Bottom Clamping Plate (L) 20
FUTABA METRIC MOLD BASE ASSEMBLIES
Mold Base Library 27 - 9
150x300
PLATE THICKNESS Top Clamping Plate (T) 20
Cavity Plate (A) 20 to 80
Stripper Plate (S) 15
Core Plate (B) 20 to 80
Support Plate (U) 30 to 40
Spacer Block (C) 50 to 80
Ejector Retainer Plate (E) 13
Ejector Plate (F) 15
Bottom Clamping Plate (L) 20
180x180
PLATE THICKNESS Top Clamping Plate (T) 20
Cavity Plate (A) 20 to 80
Stripper Plate (S) 15
Core Plate (B) 20 to 80
Support Plate (U) 30 to 40
Spacer Block (C) 50 to 80
Ejector Retainer Plate (E) 13
Ejector Plate (F) 15
Bottom Clamping Plate (L) 20
180x200
PLATE THICKNESS Top Clamping Plate (T) 20
Cavity Plate (A) 20 to 80
Stripper Plate (S) 15
Core Plate (B) 20 to 80
Support Plate (U) 30 to 40
Spacer Block (C) 50 to 80
Ejector Retainer Plate (E) 13
Ejector Plate (F) 15
Bottom Clamping Plate (L) 20
FUTABA METRIC MOLD BASE ASSEMBLIES
27 - 10 Mold Base Library
180x230
PLATE THICKNESS Top Clamping Plate (T) 20
Cavity Plate (A) 20 to 80
Stripper Plate (S) 15
Core Plate (B) 20 to 80
Support Plate (U) 30 to 40
Spacer Block (C) 50 to 80
Ejector Retainer Plate (E) 13
Ejector Plate (F) 15
Bottom Clamping Plate (L) 20
180x250
PLATE THICKNESS Top Clamping Plate (T) 20
Cavity Plate (A) 20 to 80
Stripper Plate (S) 15
Core Plate (B) 20 to 80
Support Plate (U) 30 to 40
Spacer Block (C) 50 to 80
Ejector Retainer Plate (E) 13
Ejector Plate (F) 15
Bottom Clamping Plate (L) 20
180x300
PLATE THICKNESS Top Clamping Plate (T) 20
Cavity Plate (A) 20 to 80
Stripper Plate (S) 15
Core Plate (B) 20 to 80
Support Plate (U) 30 to 40
Spacer Block (C) 50 to 80
Ejector Retainer Plate (E) 13
Ejector Plate (F) 15
Bottom Clamping Plate (L) 20
FUTABA METRIC MOLD BASE ASSEMBLIES
Mold Base Library 27 - 11
180x350
PLATE THICKNESS Top Clamping Plate (T) 20
Cavity Plate (A) 20 to 80
Stripper Plate (S) 15
Core Plate (B) 20 to 80
Support Plate (U) 30 to 40
Spacer Block (C) 50 to 80
Ejector Retainer Plate (E) 13
Ejector Plate (F) 15
Bottom Clamping Plate (L) 20
200x200
PLATE THICKNESS Top Clamping Plate (T) 25
Cavity Plate (A) 20 to 100
Stripper Plate (S) 20
Core Plate (B) 20 to 100
Support Plate (U) 30 to 40
Spacer Block (C) 50 to 90
Ejector Retainer Plate (E) 13
Ejector Plate (F) 15
Bottom Clamping Plate (L) 25
200x230
PLATE THICKNESS Top Clamping Plate (T) 25
Cavity Plate (A) 20 to 100
Stripper Plate (S) 20
Core Plate (B) 20 to 100
Support Plate (U) 30 to 40
Spacer Block (C) 50 to 90
Ejector Retainer Plate (E) 15
Ejector Plate (F) 20
Bottom Clamping Plate (L) 25
FUTABA METRIC MOLD BASE ASSEMBLIES
27 - 12 Mold Base Library
200x240
PLATE THICKNESS Top Clamping Plate (T) 25
Cavity Plate (A) 20 to 100
Stripper Plate (S) 20
Core Plate (B) 20 to 100
Support Plate (U) 30 to 40
Spacer Block (C) 50 to 90
Ejector Retainer Plate (E) 15
Ejector Plate (F) 20
Bottom Clamping Plate (L) 25
200x250
PLATE THICKNESS Top Clamping Plate (T) 25
Cavity Plate (A) 20 to 100
Stripper Plate (S) 20
Core Plate (B) 20 to 100
Support Plate (U) 30 to 40
Spacer Block (C) 50 to 90
Ejector Retainer Plate (E) 15
Ejector Plate (F) 20
Bottom Clamping Plate (L) 25
200x300
PLATE THICKNESS Top Clamping Plate (T) 25
Cavity Plate (A) 20 to 100
Stripper Plate (S) 20
Core Plate (B) 20 to 100
Support Plate (U) 30 to 40
Spacer Block (C) 50 to 90
Ejector Retainer Plate (E) 15
Ejector Plate (F) 20
Bottom Clamping Plate (L) 25
FUTABA METRIC MOLD BASE ASSEMBLIES
Mold Base Library 27 - 13
200x350
PLATE THICKNESS Top Clamping Plate (T) 25
Cavity Plate (A) 20 to 100
Stripper Plate (S) 20
Core Plate (B) 20 to 100
Support Plate (U) 30 to 40
Spacer Block (C) 50 to 90
Ejector Retainer Plate (E) 15
Ejector Plate (F) 20
Bottom Clamping Plate (L) 25
200x400
PLATE THICKNESS Top Clamping Plate (T) 25
Cavity Plate (A) 20 to 100
Stripper Plate (S) 20
Core Plate (B) 20 to 100
Support Plate (U) 30 to 40
Spacer Block (C) 50 to 90
Ejector Retainer Plate (E) 15
Ejector Plate (F) 20
Bottom Clamping Plate (L) 25
200x450
PLATE THICKNESS Top Clamping Plate (T) 25
Cavity Plate (A) 20 to 100
Stripper Plate (S) 20
Core Plate (B) 20 to 100
Support Plate (U) 30 to 40
Spacer Block (C) 50 to 90
Ejector Retainer Plate (E) 15
Ejector Plate (F) 20
Bottom Clamping Plate (L) 25
FUTABA METRIC MOLD BASE ASSEMBLIES
27 - 14 Mold Base Library
230x230
PLATE THICKNESS Top Clamping Plate (T) 25
Cavity Plate (A) 25 to 100
Stripper Plate (S) 20
Core Plate (B) 25 to 100
Support Plate (U) 35 to 50
Spacer Block (C) 60 to 100
Ejector Retainer Plate (E) 15
Ejector Plate (F) 20
Bottom Clamping Plate (L) 25
230x250
PLATE THICKNESS Top Clamping Plate (T) 25
Cavity Plate (A) 25 to 100
Stripper Plate (S) 20
Core Plate (B) 25 to 100
Support Plate (U) 35 to 50
Spacer Block (C) 60 to 100
Ejector Retainer Plate (E) 15
Ejector Plate (F) 20
Bottom Clamping Plate (L) 25
230x270
PLATE THICKNESS Top Clamping Plate (T) 25
Cavity Plate (A) 25 to 100
Stripper Plate (S) 20
Core Plate (B) 25 to 100
Support Plate (U) 35 to 50
Spacer Block (C) 60 to 100
Ejector Retainer Plate (E) 15
Ejector Plate (F) 20
Bottom Clamping Plate (L) 25
FUTABA METRIC MOLD BASE ASSEMBLIES
Mold Base Library 27 - 15
230x300
PLATE THICKNESS Top Clamping Plate (T) 25
Cavity Plate (A) 25 to 100
Stripper Plate (S) 20
Core Plate (B) 25 to 100
Support Plate (U) 35 to 50
Spacer Block (C) 60 to 100
Ejector Retainer Plate (E) 15
Ejector Plate (F) 20
Bottom Clamping Plate (L) 25
230x350
PLATE THICKNESS Top Clamping Plate (T) 25
Cavity Plate (A) 25 to 100
Stripper Plate (S) 20
Core Plate (B) 25 to 100
Support Plate (U) 35 to 50
Spacer Block (C) 60 to 100
Ejector Retainer Plate (E) 15
Ejector Plate (F) 20
Bottom Clamping Plate (L) 25
230x400
PLATE THICKNESS Top Clamping Plate (T) 25
Cavity Plate (A) 25 to 100
Stripper Plate (S) 20
Core Plate (B) 25 to 100
Support Plate (U) 35 to 50
Spacer Block (C) 60 to 100
Ejector Retainer Plate (E) 15
Ejector Plate (F) 20
Bottom Clamping Plate (L) 25
FUTABA METRIC MOLD BASE ASSEMBLIES
27 - 16 Mold Base Library
250x250
PLATE THICKNESS Top Clamping Plate (T) 25
Cavity Plate (A) 25 to 120
Stripper Plate (S) 25
Core Plate (B) 25 to 120
Support Plate (U) 35 to 50
Spacer Block (C) 60 to 100
Ejector Retainer Plate (E) 15
Ejector Plate (F) 20
Bottom Clamping Plate (L) 25
250x270
PLATE THICKNESS Top Clamping Plate (T) 25
Cavity Plate (A) 25 to 120
Stripper Plate (S) 25
Core Plate (B) 25 to 120
Support Plate (U) 35 to 50
Spacer Block (C) 60 to 100
Ejector Retainer Plate (E) 15
Ejector Plate (F) 20
Bottom Clamping Plate (L) 25
250x300
PLATE THICKNESS Top Clamping Plate (T) 25
Cavity Plate (A) 25 to 120
Stripper Plate (S) 25
Core Plate (B) 25 to 120
Support Plate (U) 35 to 50
Spacer Block (C) 60 to 100
Ejector Retainer Plate (E) 15
Ejector Plate (F) 20
Bottom Clamping Plate (L) 25
FUTABA METRIC MOLD BASE ASSEMBLIES
Mold Base Library 27 - 17
250x350
PLATE THICKNESS Top Clamping Plate (T) 25
Cavity Plate (A) 25 to 120
Stripper Plate (S) 25
Core Plate (B) 25 to 120
Support Plate (U) 35 to 50
Spacer Block (C) 60 to 100
Ejector Retainer Plate (E) 15
Ejector Plate (F) 20
Bottom Clamping Plate (L) 25
250x400
PLATE THICKNESS Top Clamping Plate (T) 25
Cavity Plate (A) 25 to 120
Stripper Plate (S) 25
Core Plate (B) 25 to 120
Support Plate (U) 35 to 50
Spacer Block (C) 60 to 100
Ejector Retainer Plate (E) 15
Ejector Plate (F) 20
Bottom Clamping Plate (L) 25
250x450
PLATE THICKNESS Top Clamping Plate (T) 25
Cavity Plate (A) 25 to 120
Stripper Plate (S) 25
Core Plate (B) 25 to 120
Support Plate (U) 35 to 50
Spacer Block (C) 60 to 100
Ejector Retainer Plate (E) 15
Ejector Plate (F) 20
Bottom Clamping Plate (L) 25
FUTABA METRIC MOLD BASE ASSEMBLIES
27 - 18 Mold Base Library
250x500
PLATE THICKNESS Top Clamping Plate (T) 25
Cavity Plate (A) 25 to 120
Stripper Plate (S) 25
Core Plate (B) 25 to 120
Support Plate (U) 35 to 50
Spacer Block (C) 60 to 100
Ejector Retainer Plate (E) 15
Ejector Plate (F) 20
Bottom Clamping Plate (L) 25
270x300
PLATE THICKNESS Top Clamping Plate (T) 25
Cavity Plate (A) 30 to 120
Stripper Plate (S) 25
Core Plate (B) 30 to 120
Support Plate (U) 40 to 50
Spacer Block (C) 70 to 100
Ejector Retainer Plate (E) 15
Ejector Plate (F) 20
Bottom Clamping Plate (L) 25
270x350
PLATE THICKNESS Top Clamping Plate (T) 25
Cavity Plate (A) 30 to 120
Stripper Plate (S) 25
Core Plate (B) 30 to 120
Support Plate (U) 40 to 50
Spacer Block (C) 70 to 100
Ejector Retainer Plate (E) 15
Ejector Plate (F) 20
Bottom Clamping Plate (L) 25
FUTABA METRIC MOLD BASE ASSEMBLIES
Mold Base Library 27 - 19
270x400
PLATE THICKNESS Top Clamping Plate (T) 25
Cavity Plate (A) 30 to 120
Stripper Plate (S) 25
Core Plate (B) 30 to 120
Support Plate (U) 40 to 50
Spacer Block (C) 70 to 100
Ejector Retainer Plate (E) 15
Ejector Plate (F) 20
Bottom Clamping Plate (L) 25
270x500
PLATE THICKNESS Top Clamping Plate (T) 25
Cavity Plate (A) 30 to 120
Stripper Plate (S) 25
Core Plate (B) 30 to 120
Support Plate (U) 40 to 50
Spacer Block (C) 70 to 100
Ejector Retainer Plate (E) 15
Ejector Plate (F) 20
Bottom Clamping Plate (L) 25
290x300
PLATE THICKNESS Top Clamping Plate (T) 25
Cavity Plate (A) 30 to 120
Stripper Plate (S) 25
Core Plate (B) 30 to 120
Support Plate (U) 40 to 50
Spacer Block (C) 70 to 100
Ejector Retainer Plate (E) 20
Ejector Plate (F) 25
Bottom Clamping Plate (L) 25
FUTABA METRIC MOLD BASE ASSEMBLIES
27 - 20 Mold Base Library
290x350
PLATE THICKNESS Top Clamping Plate (T) 25
Cavity Plate (A) 30 to 120
Stripper Plate (S) 25
Core Plate (B) 30 to 120
Support Plate (U) 40 to 50
Spacer Block (C) 70 to 100
Ejector Retainer Plate (E) 20
Ejector Plate (F) 25
Bottom Clamping Plate (L) 25
290x400
PLATE THICKNESS Top Clamping Plate (T) 25
Cavity Plate (A) 30 to 120
Stripper Plate (S) 25
Core Plate (B) 30 to 120
Support Plate (U) 40 to 50
Spacer Block (C) 70 to 100
Ejector Retainer Plate (E) 20
Ejector Plate (F) 25
Bottom Clamping Plate (L) 25
300x300
PLATE THICKNESS Top Clamping Plate (T) 25
Cavity Plate (A) 30 to 130
Stripper Plate (S) 30
Core Plate (B) 30 to 130
Support Plate (U) 45 to 60
Spacer Block (C) 70 to 110
Ejector Retainer Plate (E) 20
Ejector Plate (F) 25
Bottom Clamping Plate (L) 25
FUTABA METRIC MOLD BASE ASSEMBLIES
Mold Base Library 27 - 21
300x320
PLATE THICKNESS Top Clamping Plate (T) 25
Cavity Plate (A) 35 to 130
Stripper Plate (S) 30
Core Plate (B) 35 to 130
Support Plate (U) 45 to 60
Spacer Block (C) 70 to 110
Ejector Retainer Plate (E) 20
Ejector Plate (F) 25
Bottom Clamping Plate (L) 25
300x350
PLATE THICKNESS Top Clamping Plate (T) 25
Cavity Plate (A) 35 to 130
Stripper Plate (S) 30
Core Plate (B) 35 to 130
Support Plate (U) 45 to 60
Spacer Block (C) 70 to 110
Ejector Retainer Plate (E) 20
Ejector Plate (F) 25
Bottom Clamping Plate (L) 25
300x400
PLATE THICKNESS Top Clamping Plate (T) 30
Cavity Plate (A) 35 to 130
Stripper Plate (S) 30
Core Plate (B) 35 to 130
Support Plate (U) 45 to 60
Spacer Block (C) 70 to 110
Ejector Retainer Plate (E) 20
Ejector Plate (F) 25
Bottom Clamping Plate (L) 30
FUTABA METRIC MOLD BASE ASSEMBLIES
27 - 22 Mold Base Library
300x450
PLATE THICKNESS Top Clamping Plate (T) 30
Cavity Plate (A) 35 to 130
Stripper Plate (S) 30
Core Plate (B) 35 to 130
Support Plate (U) 45 to 60
Spacer Block (C) 70 to 110
Ejector Retainer Plate (E) 20
Ejector Plate (F) 25
Bottom Clamping Plate (L) 30
300x500
PLATE THICKNESS Top Clamping Plate (T) 30
Cavity Plate (A) 35 to 130
Stripper Plate (S) 30
Core Plate (B) 35 to 130
Support Plate (U) 45 to 60
Spacer Block (C) 70 to 110
Ejector Retainer Plate (E) 20
Ejector Plate (F) 25
Bottom Clamping Plate (L) 30
300x550
PLATE THICKNESS Top Clamping Plate (T) 30
Cavity Plate (A) 35 to 130
Stripper Plate (S) 30
Core Plate (B) 35 to 130
Support Plate (U) 45 to 60
Spacer Block (C) 70 to 110
Ejector Retainer Plate (E) 20
Ejector Plate (F) 25
Bottom Clamping Plate (L) 30
FUTABA METRIC MOLD BASE ASSEMBLIES
Mold Base Library 27 - 23
300x600
PLATE THICKNESS Top Clamping Plate (T) 30
Cavity Plate (A) 35 to 130
Stripper Plate (S) 30
Core Plate (B) 35 to 130
Support Plate (U) 45 to 60
Spacer Block (C) 70 to 110
Ejector Retainer Plate (E) 20
Ejector Plate (F) 25
Bottom Clamping Plate (L) 30
330x350
PLATE THICKNESS Top Clamping Plate (T) 30
Cavity Plate (A) 35 to 130
Stripper Plate (S) 30
Core Plate (B) 35 to 130
Support Plate (U) 45 to 60
Spacer Block (C) 70 to 110
Ejector Retainer Plate (E) 20
Ejector Plate (F) 25
Bottom Clamping Plate (L) 30
330x400
PLATE THICKNESS Top Clamping Plate (T) 30
Cavity Plate (A) 35 to 130
Stripper Plate (S) 30
Core Plate (B) 35 to 130
Support Plate (U) 45 to 60
Spacer Block (C) 70 to 110
Ejector Retainer Plate (E) 20
Ejector Plate (F) 25
Bottom Clamping Plate (L) 30
FUTABA METRIC MOLD BASE ASSEMBLIES
27 - 24 Mold Base Library
330x450
PLATE THICKNESS Top Clamping Plate (T) 30
Cavity Plate (A) 35 to 130
Stripper Plate (S) 30
Core Plate (B) 35 to 130
Support Plate (U) 45 to 60
Spacer Block (C) 70 to 110
Ejector Retainer Plate (E) 20
Ejector Plate (F) 25
Bottom Clamping Plate (L) 30
330x500
PLATE THICKNESS Top Clamping Plate (T) 30
Cavity Plate (A) 35 to 130
Stripper Plate (S) 30
Core Plate (B) 35 to 130
Support Plate (U) 45 to 60
Spacer Block (C) 70 to 110
Ejector Retainer Plate (E) 20
Ejector Plate (F) 25
Bottom Clamping Plate (L) 30
350x350
PLATE THICKNESS Top Clamping Plate (T) 30
Cavity Plate (A) 40 to 130
Stripper Plate (S) 35
Core Plate (B) 40 to 130
Support Plate (U) 45 to 60
Spacer Block (C) 70 to 110
Ejector Retainer Plate (E) 20
Ejector Plate (F) 25
Bottom Clamping Plate (L) 30
FUTABA METRIC MOLD BASE ASSEMBLIES
Mold Base Library 27 - 25
350x400
PLATE THICKNESS Top Clamping Plate (T) 30
Cavity Plate (A) 40 to 130
Stripper Plate (S) 35
Core Plate (B) 40 to 130
Support Plate (U) 45 to 60
Spacer Block (C) 70 to 110
Ejector Retainer Plate (E) 20
Ejector Plate (F) 25
Bottom Clamping Plate (L) 30
350x450
PLATE THICKNESS Top Clamping Plate (T) 30
Cavity Plate (A) 40 to 130
Stripper Plate (S) 35
Core Plate (B) 40 to 130
Support Plate (U) 45 to 60
Spacer Block (C) 70 to 110
Ejector Retainer Plate (E) 20
Ejector Plate (F) 25
Bottom Clamping Plate (L) 30
350x500
PLATE THICKNESS Top Clamping Plate (T) 30
Cavity Plate (A) 40 to 130
Stripper Plate (S) 35
Core Plate (B) 40 to 130
Support Plate (U) 45 to 60
Spacer Block (C) 70 to 110
Ejector Retainer Plate (E) 20
Ejector Plate (F) 25
Bottom Clamping Plate (L) 30
FUTABA METRIC MOLD BASE ASSEMBLIES
27 - 26 Mold Base Library
350x550
PLATE THICKNESS Top Clamping Plate (T) 30
Cavity Plate (A) 40 to 130
Stripper Plate (S) 35
Core Plate (B) 40 to 130
Support Plate (U) 45 to 60
Spacer Block (C) 70 to 110
Ejector Retainer Plate (E) 20
Ejector Plate (F) 25
Bottom Clamping Plate (L) 30
350x600
PLATE THICKNESS Top Clamping Plate (T) 30
Cavity Plate (A) 40 to 130
Stripper Plate (S) 35
Core Plate (B) 40 to 130
Support Plate (U) 45 to 60
Spacer Block (C) 70 to 110
Ejector Retainer Plate (E) 20
Ejector Plate (F) 25
Bottom Clamping Plate (L) 30
400x400
PLATE THICKNESS Top Clamping Plate (T) 30
Cavity Plate (A) 40 to 150
Stripper Plate (S) 35
Core Plate (B) 40 to 150
Support Plate (U) 50 to 70
Spacer Block (C) 100 to 130
Ejector Retainer Plate (E) 25
Ejector Plate (F) 30
Bottom Clamping Plate (L) 30
FUTABA METRIC MOLD BASE ASSEMBLIES
Mold Base Library 27 - 27
400x450
PLATE THICKNESS Top Clamping Plate (T) 30
Cavity Plate (A) 40 to 150
Stripper Plate (S) 35
Core Plate (B) 40 to 150
Support Plate (U) 50 to 70
Spacer Block (C) 100 to 130
Ejector Retainer Plate (E) 25
Ejector Plate (F) 30
Bottom Clamping Plate (L) 30
400x500
PLATE THICKNESS Top Clamping Plate (T) 35
Cavity Plate (A) 40 to 150
Stripper Plate (S) 35
Core Plate (B) 40 to 150
Support Plate (U) 50 to 70
Spacer Block (C) 100 to 130
Ejector Retainer Plate (E) 25
Ejector Plate (F) 30
Bottom Clamping Plate (L) 35
400x550
PLATE THICKNESS Top Clamping Plate (T) 35
Cavity Plate (A) 40 to 150
Stripper Plate (S) 35
Core Plate (B) 40 to 150
Support Plate (U) 50 to 70
Spacer Block (C) 100 to 130
Ejector Retainer Plate (E) 25
Ejector Plate (F) 30
Bottom Clamping Plate (L) 35
FUTABA METRIC MOLD BASE ASSEMBLIES
27 - 28 Mold Base Library
400x600
PLATE THICKNESS Top Clamping Plate (T) 35
Cavity Plate (A) 40 to 150
Stripper Plate (S) 35
Core Plate (B) 40 to 150
Support Plate (U) 50 to 70
Spacer Block (C) 100 to 130
Ejector Retainer Plate (E) 25
Ejector Plate (F) 30
Bottom Clamping Plate (L) 35
400x700
PLATE THICKNESS Top Clamping Plate (T) 35
Cavity Plate (A) 40 to 150
Stripper Plate (S) 35
Core Plate (B) 40 to 150
Support Plate (U) 50 to 70
Spacer Block (C) 100 to 130
Ejector Retainer Plate (E) 25
Ejector Plate (F) 30
Bottom Clamping Plate (L) 35
450x450
PLATE THICKNESS Top Clamping Plate (T) 35
Cavity Plate (A) 40 to 150
Stripper Plate (S) 40
Core Plate (B) 40 to 150
Support Plate (U) 60 to 80
Spacer Block (C) 100 to 130
Ejector Retainer Plate (E) 25
Ejector Plate (F) 30
Bottom Clamping Plate (L) 35
FUTABA METRIC MOLD BASE ASSEMBLIES
Mold Base Library 27 - 29
450x500
PLATE THICKNESS Top Clamping Plate (T) 35
Cavity Plate (A) 40 to 150
Stripper Plate (S) 40
Core Plate (B) 40 to 150
Support Plate (U) 60 to 80
Spacer Block (C) 100 to 130
Ejector Retainer Plate (E) 25
Ejector Plate (F) 30
Bottom Clamping Plate (L) 35
450x550
PLATE THICKNESS Top Clamping Plate (T) 35
Cavity Plate (A) 40 to 150
Stripper Plate (S) 40
Core Plate (B) 40 to 150
Support Plate (U) 60 to 80
Spacer Block (C) 100 to 130
Ejector Retainer Plate (E) 25
Ejector Plate (F) 30
Bottom Clamping Plate (L) 35
450x600
PLATE THICKNESS Top Clamping Plate (T) 35
Cavity Plate (A) 40 to 150
Stripper Plate (S) 40
Core Plate (B) 40 to 150
Support Plate (U) 60 to 80
Spacer Block (C) 100 to 130
Ejector Retainer Plate (E) 25
Ejector Plate (F) 30
Bottom Clamping Plate (L) 35
FUTABA METRIC MOLD BASE ASSEMBLIES
27 - 30 Mold Base Library
500x500
PLATE THICKNESS Top Clamping Plate (T) 35
Cavity Plate (A) 40 to 150
Stripper Plate (S) 40
Core Plate (B) 40 to 150
Support Plate (U) 60 to 80
Spacer Block (C) 100 to 130
Ejector Retainer Plate (E) 25
Ejector Plate (F) 30
Bottom Clamping Plate (L) 35
500x600
PLATE THICKNESS Top Clamping Plate (T) 35
Cavity Plate (A) 40 to 150
Stripper Plate (S) 40
Core Plate (B) 40 to 150
Support Plate (U) 60 to 80
Spacer Block (C) 100 to 130
Ejector Retainer Plate (E) 25
Ejector Plate (F) 30
Bottom Clamping Plate (L) 35
500x700
PLATE THICKNESS Top Clamping Plate (T) 35
Cavity Plate (A) 40 to 150
Stripper Plate (S) 40
Core Plate (B) 40 to 150
Support Plate (U) 60 to 80
Spacer Block (C) 100 to 130
Ejector Retainer Plate (E) 25
Ejector Plate (F) 30
Bottom Clamping Plate (L) 35
FUTABA METRIC MOLD BASE ASSEMBLIES
Mold Base Library 27 - 31
550x550
PLATE THICKNESS Top Clamping Plate (T) 35
Cavity Plate (A) 60 to 250
Stripper Plate (S) 40
Core Plate (B) 60 to 200
Support Plate (U) 70
Spacer Block (C) 100 to 170
Ejector Retainer Plate (E) 25
Ejector Plate (F) 30
Bottom Clamping Plate (L) 35
550x600
PLATE THICKNESS Top Clamping Plate (T) 35
Cavity Plate (A) 60 to 250
Stripper Plate (S) 40
Core Plate (B) 60 to 200
Support Plate (U) 70
Spacer Block (C) 100 to 170
Ejector Retainer Plate (E) 25
Ejector Plate (F) 30
Bottom Clamping Plate (L) 35
550x650
PLATE THICKNESS Top Clamping Plate (T) 35
Cavity Plate (A) 60 to 250
Stripper Plate (S) 40
Core Plate (B) 60 to 200
Support Plate (U) 70
Spacer Block (C) 100 to 170
Ejector Retainer Plate (E) 25
Ejector Plate (F) 30
Bottom Clamping Plate (L) 35
FUTABA METRIC MOLD BASE ASSEMBLIES
27 - 32 Mold Base Library
550x700
PLATE THICKNESS Top Clamping Plate (T) 35
Cavity Plate (A) 60 to 250
Stripper Plate (S) 40
Core Plate (B) 60 to 200
Support Plate (U) 70
Spacer Block (C) 100 to 170
Ejector Retainer Plate (E) 25
Ejector Plate (F) 30
Bottom Clamping Plate (L) 35
550x750
PLATE THICKNESS Top Clamping Plate (T) 35
Cavity Plate (A) 80 to 250
Stripper Plate (S) 40
Core Plate (B) 80 to 200
Support Plate (U) 70
Spacer Block (C) 100 to 170
Ejector Retainer Plate (E) 25
Ejector Plate (F) 30
Bottom Clamping Plate (L) 35
550x800
PLATE THICKNESS Top Clamping Plate (T) 35
Cavity Plate (A) 80 to 250
Stripper Plate (S) 40
Core Plate (B) 80 to 200
Support Plate (U) 70
Spacer Block (C) 100 to 170
Ejector Retainer Plate (E) 25
Ejector Plate (F) 30
Bottom Clamping Plate (L) 35
FUTABA METRIC MOLD BASE ASSEMBLIES
Mold Base Library 27 - 33
600x600
PLATE THICKNESS Top Clamping Plate (T) 35
Cavity Plate (A) 60 to 250
Stripper Plate (S) 50
Core Plate (B) 60 to 200
Support Plate (U) 80
Spacer Block (C) 100 to 170
Ejector Retainer Plate (E) 25
Ejector Plate (F) 30
Bottom Clamping Plate (L) 35
600x650
PLATE THICKNESS Top Clamping Plate (T) 35
Cavity Plate (A) 60 to 250
Stripper Plate (S) 50
Core Plate (B) 60 to 200
Support Plate (U) 80
Spacer Block (C) 100 to 170
Ejector Retainer Plate (E) 25
Ejector Plate (F) 30
Bottom Clamping Plate (L) 35
600x700
PLATE THICKNESS Top Clamping Plate (T) 35
Cavity Plate (A) 60 to 250
Stripper Plate (S) 50
Core Plate (B) 60 to 200
Support Plate (U) 80
Spacer Block (C) 100 to 170
Ejector Retainer Plate (E) 25
Ejector Plate (F) 30
Bottom Clamping Plate (L) 35
FUTABA METRIC MOLD BASE ASSEMBLIES
27 - 34 Mold Base Library
600x750
PLATE THICKNESS Top Clamping Plate (T) 35
Cavity Plate (A) 100 to 250
Stripper Plate (S) 50
Core Plate (B) 100 to 200
Support Plate (U) 80
Spacer Block (C) 100 to 170
Ejector Retainer Plate (E) 25
Ejector Plate (F) 30
Bottom Clamping Plate (L) 35
600x800
PLATE THICKNESS Top Clamping Plate (T) 35
Cavity Plate (A) 100 to 250
Stripper Plate (S) 50
Core Plate (B) 100 to 200
Support Plate (U) 80
Spacer Block (C) 100 to 170
Ejector Retainer Plate (E) 25
Ejector Plate (F) 30
Bottom Clamping Plate (L) 35
650x650
PLATE THICKNESS Top Clamping Plate (T) 35
Cavity Plate (A) 100 to 250
Stripper Plate (S) 60
Core Plate (B) 100 to 200
Support Plate (U) 90
Spacer Block (C) 100 to 170
Ejector Retainer Plate (E) 25
Ejector Plate (F) 30
Bottom Clamping Plate (L) 35
FUTABA METRIC MOLD BASE ASSEMBLIES
Mold Base Library 27 - 35
650x700
PLATE THICKNESS Top Clamping Plate (T) 35
Cavity Plate (A) 100 to 250
Stripper Plate (S) 60
Core Plate (B) 100 to 200
Support Plate (U) 90
Spacer Block (C) 100 to 170
Ejector Retainer Plate (E) 25
Ejector Plate (F) 30
Bottom Clamping Plate (L) 35
650x750
PLATE THICKNESS Top Clamping Plate (T) 35
Cavity Plate (A) 100 to 250
Stripper Plate (S) 60
Core Plate (B) 100 to 200
Support Plate (U) 90
Spacer Block (C) 100 to 170
Ejector Retainer Plate (E) 25
Ejector Plate (F) 30
Bottom Clamping Plate (L) 35
650x800
PLATE THICKNESS Top Clamping Plate (T) 35
Cavity Plate (A) 100 to 250
Stripper Plate (S) 60
Core Plate (B) 100 to 200
Support Plate (U) 90
Spacer Block (C) 100 to 170
Ejector Retainer Plate (E) 25
Ejector Plate (F) 30
Bottom Clamping Plate (L) 35
FUTABA METRIC MOLD BASE ASSEMBLIES
27 - 36 Mold Base Library
700x700
PLATE THICKNESS Top Clamping Plate (T) 40
Cavity Plate (A) 100 to 250
Stripper Plate (S) 60
Core Plate (B) 100 to 200
Support Plate (U) 100
Spacer Block (C) 100 to 170
Ejector Retainer Plate (E) 25
Ejector Plate (F) 30
Bottom Clamping Plate (L) 40
700x750
PLATE THICKNESS Top Clamping Plate (T) 40
Cavity Plate (A) 100 to 250
Stripper Plate (S) 60
Core Plate (B) 100 to 200
Support Plate (U) 100
Spacer Block (C) 100 to 170
Ejector Retainer Plate (E) 25
Ejector Plate (F) 30
Bottom Clamping Plate (L) 40
700x800
PLATE THICKNESS Top Clamping Plate (T) 40
Cavity Plate (A) 100 to 250
Stripper Plate (S) 60
Core Plate (B) 100 to 200
Support Plate (U) 100
Spacer Block (C) 100 to 170
Ejector Retainer Plate (E) 25
Ejector Plate (F) 30
Bottom Clamping Plate (L) 40
Mold Base Library 28 - 1
3FUTABA METRIC BUSHINGS
GUIDE BUSH, CATALOG NO. GBA
Generic Part Name: GBA_FM
InstanceName
NOMINAL_SIZE
d_nom d_1head_
diahead_height
length L_1
GBA_FM12 12.0000 12.0000 18.0000 22.0000 5.0000 19 to 39 by 5,49, 59
29
GBA_FM16 16.0000 16.0000 25.0000 30.0000 6.0000 19 to 39 by 5,49 to 79 by 10
35
GBA_FM20 20.0000 20.0000 30.0000 35.0000 8.0000 19 to 39 by 5,49 to 79 by 10
35
GBA_FM25 25.0000 25.0000 35.0000 40.0000 8.0000 24 to 39 by 5,49 to 79 by 10,49 to 199 by
10
50
GBA_FM30 30.0000 30.0000 42.0000 47.0000 10.0000 29, 34, 39 to139 by 10
60
GBA_FM35 35.0000 35.0000 48.0000 54.0000 10.0000 39 to 149 by10
70
GBA_FM40 40.0000 40.0000 55.0000 61.0000 10.0000 39 to 159 by10
80
GBA_FM50 50.0000 50.0000 70.0000 76.0000 12.0000 49 to 159 by10
100
GBA_FM60 60.0000 60.0000 80.0000 86.0000 15.0000 99 to 129 by10, 149. 159 to
199 by 20
140
FUTABA METRIC BUSHINGS
28 - 2 Mold Base Library
GUIDE BUSH, CATALOG NO. GBB
Generic Part Name: GBB_FM
InstanceName
NOMINAL_SIZE
d_nom d_1 M length L_1
GBB_FM12 12.0000 12.0000 18.0000 4.0000 9 *
GBB_FM16 16.0000 16.0000 25.0000 6.0000 14 to 29 by5
*
GBB_FM20 20.0000 20.0000 30.0000 6.0000 14 to 39 by5
*
GBB_FM25 25.0000 25.0000 35.0000 8.0000 24 to 39 by5, 49
*
GBB_FM30 30.0000 30.0000 42.0000 8.0000 29, 34, 39to 59 by 10
*
GBB_FM35 35.0000 35.0000 48.0000 8.0000 29, 34, 39to 79 by 10
*
GBB_FM40 40.0000 40.0000 55.0000 8.0000 39 to 79 by10
*
GBB_FM50 50.0000 50.0000 70.0000 10.0000 39 to 99 by10
48
GBB_FM60 60.0000 60.0000 80.0000 10.0000 59, 69, 129 *
FUTABA METRIC BUSHINGS
Mold Base Library 28 - 3
SPRUE BUSH, CATALOG NO. SBA
Generic Part Name: SBA_FM
InstanceName
NOMINAL_SIZE
d_nom hole_dia angle length
SBA_FM1632 16.0000 16.0000 3.50000 1.00000 90, 130
SBA_FM1633 16.0000 16.0000 3.50000 1.50000 50
SBA_FM1642 16.0000 16.0000 4.50000 1.00000 90, 130
SBA_FM1643 16.0000 16.0000 4.50000 1.50000 50
SBA_FM2032 20.0000 20.0000 3.50000 1.00000 90, 130
SBA_FM2033 20.0000 20.0000 3.50000 1.50000 50
SBA_FM2042 20.0000 20.0000 4.50000 1.00000 90, 130
SBA_FM2043 20.0000 20.0000 4.50000 1.50000 50
FUTABA METRIC BUSHINGS
28 - 4 Mold Base Library
SPRUE BUSH, CATALOG NO. SBB
Generic Part Name: SBB_FM
InstanceName
NOMINAL_SIZE
d_nomhead_height
hole_dia angle length
SBB_FM1232 16.0000 16.0000 25.0000 3.50000 1.00000 105, 145
SBB_FM1233 16.0000 16.0000 25.0000 3.50000 1.50000 65
SBB_FM1242 16.0000 16.0000 25.0000 4.50000 1.00000 105, 145
SBB_FM1243 16.0000 16.0000 25.0000 4.50000 1.50000 65
SBB_FM1332 16.0000 16.0000 30.0000 3.50000 1.00000 110, 150
SBB_FM1333 16.0000 16.0000 30.0000 3.50000 1.50000 70
SBB_FM1342 16.0000 16.0000 30.0000 4.50000 1.00000 110, 150
SBB_FM1343 16.0000 16.0000 30.0000 4.50000 1.50000 70
SBB_FM2232 20.0000 20.0000 25.0000 3.50000 1.00000 105, 145
SBB_FM2233 20.0000 20.0000 25.0000 3.50000 1.50000 65
SBB_FM2242 20.0000 20.0000 25.0000 4.50000 1.00000 105, 145
SBB_FM2243 20.0000 20.0000 25.0000 4.50000 1.50000 65
SBB_FM2332 20.0000 20.0000 30.0000 3.50000 1.00000 110, 150
SBB_FM2333 20.0000 20.0000 30.0000 3.50000 1.50000 70
SBB_FM2342 20.0000 20.0000 30.0000 4.50000 1.00000 110, 150
SBB_FM2343 20.0000 20.0000 30.0000 4.50000 1.50000 70
FUTABA METRIC BUSHINGS
Mold Base Library 28 - 5
PRE-HARDENED SPRUE BUSH, CATALOG NO. SBC
Generic Part Name: SBC_FM
InstanceName
NOMINAL_SIZE
d_nom ring_dia hole_dist length
SBC_FM13 13.0000 13.0000 36.0000 13.0000 50, 70
SBC_FM16 16.0000 16.0000 50.0000 18.0000 50, 70, 90
SBC_FM20 20.0000 20.0000 50.0000 18.0000 50, 70, 90
FUTABA METRIC BUSHINGS
28 - 6 Mold Base Library
PRE-HARDENED SPRUE BUSH, CATALOG NO. SBD
Generic Part Name: SBD_FM
InstanceName
NOMINAL_SIZE
d_nomhead_height
hole_dist length
SBD_FM1625 16.0000 16.0000 25.0000 15.0000 65, 85, 105
SBD_FM1630 16.0000 16.0000 30.0000 20.0000 70, 90, 110
SBD_FM2025 20.0000 20.0000 25.0000 15.0000 65, 85, 105
SBD_FM2030 20.0000 20.0000 30.0000 20.0000 70, 90, 110
Mold Base Library 29 - 1
23FUTABA METRIC PINS
STRAIGHT EJECTOR PIN, CATALOG NO. EA
Generic Part Name: EA_FM
InstanceName
NOMINAL_SIZE
d_nom head_dia head_height length
EA_FM015 1.5000 1.5000 5.0000 3.00000 100, 150, 200
EA_FM020 2.0000 2.0000 6.0000 4.00000 100 to 300 by 50
EA_FM025 2.5000 2.5000 6.0000 4.00000 100, 150, 200
EA_FM030 3.0000 3.0000 6.0000 4.00000 100 to 300 by 50
EA_FM035 3.5000 3.5000 7.0000 4.00000 100 to 300 by 50
EA_FM040 4.0000 4.0000 8.0000 6.00000 100 to 350 by 50
EA_FM045 4.5000 4.5000 8.0000 6.00000 100 to 350 by 50
EA_FM050 5.0000 5.0000 9.0000 6.00000 100 to 350 by 50
EA_FM060 6.0000 6.0000 10.0000 6.00000 100 to 350 by 50
EA_FM070 7.0000 7.0000 11.0000 6.00000 100 to 350 by 50
EA_FM080 8.0000 8.0000 13.0000 8.00000 100 to 350 by 50
EA_FM100 10.0000 10.0000 15.0000 8.00000 100 to 350 by 50
EA_FM120 12.0000 12.0000 17.0000 8.00000 100 to 350 by 50
EA_FM140 14.0000 14.0000 19.0000 8.00000 100 to 350 by 50
EA_FM160 16.0000 16.0000 21.0000 8.00000 100 to 350 by 50
EA_FM180 18.0000 18.0000 23.0000 8.00000 100 to 350 by 50
EA_FM200 20.0000 20.0000 25.0000 8.00000 100 to 350 by 50
FUTABA METRIC PINS
29 - 2 Mold Base Library
STRAIGHT EJECTOR PIN, CATALOG NO. EJ
Generic Part Name: EJ_FM
InstanceName
NOMINAL_SIZE
d_nom head_dia length
EJ_FM010 1.0000 1.0000 3.0000 100, 150
EJ_FM011 1.1000 1.1000 3.0000 100, 150
EJ_FM012 1.2000 1.2000 3.0000 100, 150
EJ_FM013 1.3000 1.3000 3.0000 100, 150
EJ_FM014 1.4000 1.4000 3.0000 100, 150
EJ_FM015 1.5000 1.5000 3.0000 100, 150, 200
EJ_FM016 1.6000 1.6000 4.0000 100, 150, 200
EJ_FM017 1.7000 1.7000 4.0000 100, 150, 200
EJ_FM018 1.8000 1.8000 4.0000 100, 150, 200
EJ_FM019 1.9000 1.9000 4.0000 100, 150, 200
EJ_FM020 2.0000 2.0000 4.0000 100 to 300 by 50
EJ_FM021 2.1000 2.1000 5.0000 100, 150, 200
EJ_FM022 2.2000 2.2000 5.0000 100, 150, 200
EJ_FM023 2.3000 2.3000 5.0000 100, 150, 200
EJ_FM024 2.4000 2.4000 5.0000 100, 150, 200
EJ_FM025 2.5000 2.5000 5.0000 100 to 300 by 50
EJ_FM026 2.6000 2.6000 6.0000 100, 150, 200
EJ_FM027 2.7000 2.7000 6.0000 100, 150, 200
EJ_FM028 2.8000 2.8000 6.0000 100, 150, 200
EJ_FM029 2.9000 2.9000 6.0000 100, 150, 200
FUTABA METRIC PINS
Mold Base Library 29 - 3
EJ_FM030 3.0000 3.0000 6.0000 100 to 350 by 50
EJ_FM035 3.5000 3.5000 7.0000 100 to 350 by 50
EJ_FM040 4.0000 4.0000 7.0000 100 to 350 by 50
EJ_FM050 5.0000 5.0000 8.0000 100 to 400 by 50
EJ_FM060 6.0000 6.0000 9.0000 100 to 400 by 50, 500
EJ_FM080 8.0000 8.0000 11.0000 100 to 400 by 50, 400
EJ_FM100 10.0000 10.0000 14.0000 100 to 400 by 50, 500
EJ_FM120 12.0000 12.0000 16.0000 100 to 400 by 50, 500
InstanceName
NOMINAL_SIZE
d_nom head_dia length
FUTABA METRIC PINS
29 - 4 Mold Base Library
GUIDE PIN, CATALOG NO. GPA
Generic Part Name: GPA_FM
InstanceName
NOMINAL_SIZE
d_nomhead_
diahead_height
length L_1
GPA_FM12 12.0000 12.0000 17.0000 5.0000 37 to 107 by 5,117, 127
19, 29, 39
GPA_FM16 16.0000 16.0000 20.0000 6.0000 37 to 157 by 5,167
19, 24, 29, 39
GPA_FM20 20.0000 20.0000 25.0000 6.0000 37 to 167 by 5,177 to 207 by
10
19, 29, 34, 39,49
GPA_FM25 25.0000 25.0000 30.0000 8.0000 47 to 217 by 5,227, 237, 247
24, 29 to 59 by10
GPA_FM30 30.0000 30.0000 35.0000 8.0000 57 to 232 by 5,237 to 277 by
10
29, 34, 39 to69 by 10
GPA_FM35 35.0000 35.0000 40.0000 8.0000 77, 87, 97, 107to 277 by 5,
287 to 317 by10
39 to 79 by 10
GPA_FM40 40.0000 40.0000 45.0000 10.0000 77 to 317 by10
39 to 79 by 10
GPA_FM50 50.0000 50.0000 56.0000 12.0000 97 to 357 by10
49 to 99 by 10,119
GPA_FM6 60.0000 60.0000 66.0000 15.0000 197 to 357 by10
99
FUTABA METRIC PINS
Mold Base Library 29 - 5
RETURN PIN, CATALOG NO. RPN
Generic Part Name: RPN_FM
InstanceName
NOMINAL_SIZE
d_nom head_dia length
RPN_FM08 8.0000 8.0000 12.0000 47 to 72 by 5
RPN_FM10 10.0000 10.0000 15.0000 47 to 127 by 5
RPN_FM12 12.0000 12.0000 17.0000 55 to 130 by 5,140 to 155 by5, 165 to 215
by 10
RPN_FM15 15.0000 15.0000 20.0000 50 to 240 by 5,250
RPN_FM20 20.0000 20.0000 25.0000 65 to 265 by 5,275
RPN_FM25 25.0000 25.0000 30.0000 80 to 275 by 5,280 to 320 by
10
RPN_FM30 30.0000 30.0000 35.0000 110 to 330 by10, 380 to 630
by 50
RPN_FM35 35.0000 35.0000 40.0000 250, 300, 380
Mold Base Library 30 - 1
30FUTABA METRIC LOCATING RINGS
LOCATING RING, CATALOG NO. LRA
Generic Part Name: LRA_FM
InstanceName
NOMINAL_SIZE
ring_dia hole_dia H hole_dist
LRA_FM60 60.000 60.000 36.000 4.50000 24.0000
LRA_FM100 100.000 100.000 70.000 7.00000 42.5000
LRA_FM120 120.000 120.000 90.000 7.00000 52.5000
LRA_FM150 150.000 150.000 110.000 9.00000 65.0000
FUTABA METRIC LOCATING RINGS
30 - 2 Mold Base Library
LOCATING RING, CATALOG NO. LRB
Generic Part Name: LRB_FM
InstanceName
NOMINAL_SIZE
ring_dia hole_dia
LRB_FM1036 100.000 100.000 36.0000
LRB_FM1050 100.000 100.000 50.0000
LRB_FM1236 120.000 120.000 36.0000
LRB_FM1250 120.000 120.000 50.0000
Mold Base Library 31 - 1
31FUTABA METRIC SCREWS
SCREW
Generic Part Name: SHCS_FM
The dimension table for the screw component is presented on the next page.
FU
TA
BA
ME
TR
IC S
CR
EW
S
31
- 2M
old
Ba
se L
ibra
ry
InstanceName
NOM_SIZE_THR_PITCH
thread_dia
body_dia
head_dia
head_height
head_chamfer
head_fillet
under-head_fillet
hex_socket
flatwidth
sockdepth
wallthick
SHCS_FM05 M5x0.8 5.000 5.000 8.500 5.000 0.5000 0.1300 0.2000 4.000 4.0800 2.5000 1.90000
SHCS_FM06 M6x1 6.000 6.000 10.000 6.000 0.6000 0.2000 0.2500 5.000 5.0800 3.0000 2.28000
SHCS_FM08 M8x1.25 8.000 8.000 13.000 8.000 0.8000 0.2000 0.4000 6.000 6.0900 4.0000 3.20000
SHCS_FM10 M10x1.5 10.000 10.000 16.000 10.000 1.0000 0.2000 0.4000 8.000 8.1200 5.0000 4.00000
SHCS_FM12 M12x1.75 12.000 12.000 18.000 12.000 1.2000 0.2500 0.6000 10.000 10.1300 6.0000 4.80000
SHCS_FM14 M14x2 14.000 14.000 21.000 14.000 1.4000 0.2500 0.6000 12.000 12.1500 7.0000 5.60000
SHCS_FM16 M16x2 16.000 16.000 24.000 16.000 1.6000 0.2500 0.6000 14.000 14.1600 8.0000 6.40000
SHCS_FM20 M20x2.5 20.000 20.000 30.000 20.000 2.0000 0.4000 0.8000 17.000 17.2200 10.0000 8.00000
FUTABA METRIC SCREWS
Mold Base Library 31 - 3
The lengths for the screws are as follows:
InstanceName
length thread_length
SHCS_FM05 20 16
SHCS_FM06 20 18
SHCS_FM08 16, 20, 25, 55to 90 by 5, 100
13, 17, 22
SHCS_FM10 20, 25, 30, 70to 90 by 5, 100
17, 22, 26
SHCS_FM12 20, 25, 30, 40,70 to 90 by 5,100 to 180 by
10
17, 22, 27, 30,36
SHCS_FM14 25, 30, 35, 85,90 to 200 by
10
22, 27, 32, 34,40
SHCS_FM16 50, 55, 150 to300 by 10
38, 44, 57
SHCS_FM20 50, 55, 150 to270 by 10
46, 52, 65