Blow Molding Roadshow 2015 - GCM Technical Support E ...
-
Upload
khangminh22 -
Category
Documents
-
view
0 -
download
0
Transcript of Blow Molding Roadshow 2015 - GCM Technical Support E ...
Product Introduction by VPTS 2th November 2015
Ms. Lalisa Aurpongpun
Engineer, Technical Support Department
PTT Polymer Marketing Company Limited
Email : [email protected]
Product Introduction by VPTS 2th November 2015
Agenda
• PTTPM Products Overview
• InnoPlus for Blow Molding Application
• Development Trend
Product Introduction by VPTS 2th November 2015
PP
Technology: Lyondellbasell
Capacity : 750 KTPA
LDPE
HDPE
LLDPE
Technology: Lyondellbasell (Tubular)
Capacity : 300 KTPA
Technology: Mitsui CX
Capacity : 850 KTPA
Technology: Univation (Unipol)
Capacity : 400 KTPA
(Double capacity up to 800 KTPA in 2018)
Technology: Monsanto
Capacity : 60 KTPA
HIPS
GPPS
Technology: Hunstman
Capacity : 30 KTPA
PTTPM Product Overview
Product Introduction by VPTS 2th November 2015
PP
Technology: Lyondellbasell
Capacity : 750 KTPA
LDPE
HDPE
LLDPE
Technology: Lyondellbasell (Tubular)
Capacity : 300 KTPA
Technology: Mitsui CX
Capacity : 850 KTPA
Technology: Univation (Unipol)
Capacity : 400 KTPA
(Double capacity up to 800 KTPA in 2018)
Technology: Monsanto
Capacity : 60 KTPA
HIPS
GPPS
Technology: Hunstman
Capacity : 30 KTPA
PTTPM Product Overview
Product Introduction by VPTS 2th November 2015
PTTPM Product Overview
• Mechanical Testing Lab
• Polymer Characterization Lab
• Catalysis and Wet Lab
• Analytical Lab
• Formulation Lab
• GPC
• Calibration Lab
• High Sensitivity Lab
Research Laboratories
Product Introduction by VPTS 2th November 2015
InnoPlus Grades
InnoPlus HDPE
Total 26 grades
• Blown film
4 grades
• Cap & Closure
6 grades
• Monofilament
2 grades
• Blow molding
6 grades
• Injection Molding
6 grades
• Thermoforming
1 grades
• Pipe (PE100 natural)
1 grade
InnoPlus LDPE
Total 9 grades
• Blown film
8 grades
• Injection molding &
Masterbatch
1 grades
(Blow molding and foam
application can be used film
grades)
InnoPlus LLDPE
Total 19 grades
• Blown film (C4 LL)
9 grades
• Blown film (C6 mLL)
4 grades
• Rotational molding
7 grades
• Wire & Cable
2 grades
• Injection molding &
Masterbatch
1 grade
Product Introduction by VPTS 2th November 2015
InnoPlus Grade for Blow Molding (General Application)
• Drinking water botttle
• Milk bottle
• Beverage bottle
• Household Product
1. Food containers
HDPE
HD4200B HD5200B
MFR 190, 2.16 kg 0.67 0.45
Density 0.966 0.966
ESCR; 25%
Igepal 25 30
Application Food Containers
Product Introduction by VPTS 2th November 2015
• Personal care container
• Cosmetic bottle
• Shampoo bottle
• Detergent bottle
• Lubricant oil containers
2. Chemical Containers
HDPE
HD6200B HD6600B HD7000H
MFR 190,
2.16Kg 0.45 0.40 0.1
Density 0.962 0.957 0.952
ESCR; 25%
Igepal 60 400 >1000
Application Small to Medium size of chemical
containers
InnoPlus Grade for Blow Molding (General Application)
Product Introduction by VPTS 2th November 2015
HDPE
HD7200B HD8200B
MFR 190, 2.16Kg 0.04 0.03
Density 0.956 0.955
ESCR; 25%
Igepal >1000 >1000
Application Large drums
• 20-160 liters drums
• Chemical drums
• Lubricant drums
3. Large Drums
InnoPlus Grade for Blow Molding (General Application)
Product Introduction by VPTS 2th November 2015
LDPE
LD2420D LD2420F
MFR 190, 2.16 Kg 0.27 0.75
Density 0.922 0.922
Slip/AB No No
Application Small bottle (Squeeze) ,
Cosmetic Tube
InnoPlus Grade for Blow Molding (General Application)
Product Introduction by VPTS 2th November 2015
InnoPlus Grade for Blow Molding (Advanced Application)
HDPE Liner
Plastic Converter
1. Liner for LPG Composite Cylinder
Product Introduction by VPTS 2th November 2015
• Washer Tank
• Plastic Fuel Tank
2. Automotive Part
InnoPlus Grade for Blow Molding (Advanced Application)
Product Introduction by VPTS 2th November 2015
Development Trend
2. Large Size Tank Replace Product
from Rotational Molding Process
1. Weight Reduction for Bottle / Container
3. Intermediate Bulk Containers(IBC)
Product Introduction by VPTS 2th November 2015
Technical Support E-Service
Technical Question ?
Technical Datasheet
Safety Datasheet
Product Introduction by VPTS 2th November 2015
Technical Support E-Service
https://www.pttpm-techinfo.com/
All technical documents you need • Tech Datasheet / SDS / PRC / Cert of Origin • ISO / Plant information / Product detail