Tubes and fittings

Tubes and fittingsTubes and fi ttings 2010

Omslag utside.indd 1Omslag utside.indd 1 11.11.10 12.0511.11.10 12.05

Denne ”minikatalogen”inneholder deler av kapittel 1 av Alfa Lavals produktkatalog – med fokus på enklere komponenter som rør, bend, fittings og annet montasjemateriell. Denne er ment for brukere som ønsker en enkel oversikt over de viktigste standard komponentene som brukes i det norske marked.

I samarbeide med Alfa Laval kan Landteknikk tilby markedets mest omfattende utvalg av pumper, ventiler, komponenter og montasjemateriell til næringsmiddelindustrien.

Den komplette katalogen fra Alfa Laval (1258 sider) inneholder informasjon om pumper, ventiler, varme-vekslere filtre, tankutrustning og automasjonskompo-nenter, samt reservedeler til disse. Kontakt oss dersom du har behov for den komplette katalogen!

Mer informasjon på nettDu finner mer informasjon på www.landteknikk.no. Her finner du også direkte linker til gode produkt-søkeverktøy på www.alfalaval.com. Her får du også tilgang til komplett katalog i elektronisk utgave samt produktdatablader.

Spør oss!Våre fagfolk hjelper gjerne dersom du har spørsmål, eller det er produkter du ikke finner i denne katalogen. Husk også at vi gjerne står til tjeneste ved ombygging og modernisering, vedlikehold og opti malisering av anlegget. Vårt team av montasje- og servicespesialister kjenner næringsmiddelindustrien og de krav som stilles til hygieniske installasjoner.

Det meste du trenger til drift og vedlikehold– markedets mest omfattende utvalg av montasjemateriell

OsloPostboks 83 Økern

0508 Oslo

Tlf: 23 05 28 00

Fax: 23 05 28 01

KleppLalandsveien 2

4353 Klepp Stasjon

Tlf: 51 78 83 00

Fax: 51 78 83 01

TrondheimPostboks 1836 Lade

7440 Trondheim

Tlf: 73 87 60 00

Fax: 73 87 60 01

Side 2.indd 1 11.11.10 12.17Omslag innside.indd 1Omslag innside.indd 1 11.11.10 12.2511.11.10 12.25

1. Tubes and Fittings

Alfa Laval constantly focuses on producing installation material with long durability,problem-free welding and assembly, and highest possible strength.

1

Product Presentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.0

Sanitary, ISO 2037 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1

Sanitary, DIN 11850 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2

Tri-Clover® Sanitary ASME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5

Tri-Clover® UltraPure, ASME BPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.6

Tri-Clover® UltraPure, Series A/DIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.7

Installation accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.10

Supply Concept Product Presentation

1.1.

kySome might simply call it logistics. At Alfa Laval, we call it thesurvival of the fittest.

Efficient logistics is one of the most important influential factors deciding a companys’ fate in the hustle and bustle world of engineering and

construction. That’s why Alfa Laval is the first on the market to introduce a new way for you to stay ahead of your competitors – a four tier supply

chain concept for buying fittings.

We offer you superior logistics on a worldwide basis. In practice that means fast and efficient deliveries according to your needs and competitive

pricing without compromising the product quality or ethical standards. It doesn’t matter whether you order single pieces, boxes, a pallet or a container;

we have the supply chain that best fits your needs in terms of price, volume and delivery time.

Ordering of larger quantities and consolidated orders will also be awarded with additional discounts, so why not decide to stay one step ahead of

all logistics problems? Stay ahead with the first true supply chain concept that fits your needs.

Easy ordering via e-channel catalog at www.alfalaval.com/echannel or contact your Alfa Laval contact person.

Single pieces Box of 10 Pallet ContainerFull product

range readily

available from

1 to 9 pieces.

Robust and labeled

packaging secures the

products.

Consolidate your orders and

get delivery directly from the

factory stock by ordering via

e-Channel catalog.

Made-to-order and delivered

directly from factory. Rationalize

your order processing time by

ordering via e-Channel catalog.

Single Pieces Box of 10 Pallet Container

Assortment AllMost standard products

1" – 4", DN25-DN100

Fast selling products

1" – 4", DN25-DN100

All products available from

factoryAvailability From stock From stock From factory stock Made to order

Price Current priceCurrent price less box

discount

Current price less box &

pallet discountLowest price

How to order Same as today Same as today e-Channel catalog e-Channel catalog

Order volume 1 – 9 pieces 10 piecesMinimum order value for

pallet to consider

Minimum order value for

container to consider

DECIDE YOUR DISCOUNTS: 25% or 35% or MOREIn the following chapters 1.1 to 1.5 and 1.9 the products available in boxes of 10 and in pallets are highlighted on each page.

Box of 10 When ordering boxes of 10 pcs you will receive a 25% discount.

Pallet: When ordering pallets in e-channel cataloque you will receive 35% discount.

The pallet symbol indicates which products in the range from 1-4" (DN25-100) are availble from factory stock.

Container: Please contact your Alfa Laval Contact person for discount agreement.The complete pallet and container product lists are available for download from e-channel cataloque.

1.1.36

Product Presentation Alfa Laval Installation Material

1.1.

kyIn all shapes, sizes and standardsAlfa Laval Installation Material

.

Alfa Laval is your complete source for specialized fittings and tubingrequired in food, dairy, beverage, personal care, biotechnology andpharmaceutical process applications. Smooth, crevice-free interiorsand secure, self-aligning joints are characteristic for Alfa Laval Fittings.Each offers superior corrosion-resistance and unmatched servicelife. Alfa Laval fittings are designed and manufactured to ensuredimensional accuracy and structural integrity, making them easy toinstall. Tubing is manufactured to Alfa Laval’s stringent specifications,making it a perfect match for the weld fittings. Choose from a widerange of tube sizes, surface finishes and connect options. All productsare labelled with a bar code, product information and manufacturingdate. This provides the optimum identification and ensures that theproduct arrives to the job site in a clean orbital weld condition.

The Alfa Laval tubes and fittings are divided into two product ranges,Sanitary and UltraPure, The Sanitary range is suitable for moststandard duties and the UltraPure range is suitable for duties withextra high demands on hygiene and cleanability.

Sanitary range tubes and fittingsThe Sanitary product range offers a wide range of tubes and fittingswith an internal surface finish from Ra<0,8 µm to Ra< 1,6 µm. TheSanitary range has tubes and fittings according to DIN 11850, ISO2037, BS 4825, JIS G 3447, and ASME dimension standards.

UltraPure range tubes and fittingsThe UltraPure product range offers a wide range of tubes and fittingswith an internal surface finish from Ra<0,4 µm to Ra< 0,8 µm, eitherelectro polished or mechanically polished. The UltraPure range hastubes and fittings according to DIN 11850, ISO 1127, and ASMEBPE dimension standards. The UltraPure range is manufactured incompliance with the ASME BPE and DIN 11866 standards. All tubesand fittings are internally cleaned and individually capped and bagged.All product wetted st. st. products in the UltraPure range (exceptproducts w. H3o finish) are delivered with MTR (Mill Test Report) orwith 3.1. certificate in accordance to EN 10204.Certificates for H3o are available upon request.

The UltraPure range is manufactured under extra strict and throughquality control methods. Wall thickness integrity is maintained throughthe use of fabrication grade minimum wall tubing for all cold-formedtubular products. After cold forming, our tube product is resized toensure that the ovality falls within the prescribed tolerances. Endfacing is provided with a machined square-cut method. This allows forthe most accurate and consistent orbital weld result. All fittings are putthrough 100% visual inspection and ovality and squareness tolerancesare inspected with calibrated equipment. Surface finish is inspectedwith a calibrated profilometer to ensure the Roughness average (Ra)maximum is not exceeded.

1.1.37

Alfa Laval Installation Material Product Presentation

1.1Surface specification for Alfa Laval Sanitary rangeSanitary tubes

Surface texture (Ra µm) Dimension rangesAlfa Laval

designationInternal

Surface

Welded

areaExternal

Standard

designa-

tion

According

toTreatment

DIN 11850 ISO 2037 BS 4825

Tri-Clover®

Sanitary

ASMEBC < 0.8 < 1.6 pickled BC DIN 11850 Annealed X X XBD < 0.8 < 1.6 < 1.0 BD DIN 11850 Annealed X X XCC < 0.8 < 1.6 pickled CC DIN 11850 Not annealed XCD < 0.8 < 1.6 < 1.0 CD DIN 11850 Not annealed X

Tri-Clover® Sanitary < 0.8 < 0.8 < 0.8 No. 4 1) 3A Annealed X

1) According to 3A 33-01 section D1

Sanitary Fittings

Surface designation Dimension ranges

ProductInternal External DIN ISO BS JIS G

Tri-Clover® Sanitary

ASMEMat Mat XSemi bright Semi bright X X XMirror Mirror X

Unions

3A 3A XMat Mat XRaw Raw XRaw Semi bright XRaw Polished X XSemi bright Semi bright XPolished Polished XMirror Mirror X

Bends

3A 3A XMat Mat XRaw Raw XPolished Polished X X XMirror Mirror X

Tees

3A 3A XMat Mat XRaw Semi bright XRaw Polished X X

Semi bright Semi bright X

Reducers

3A 3A X

Explanation of surface designation for fittings

Alfa Laval designation MethodMat Shot BlastedRaw As fabricated or tumbledSemi bright As fabricated or tumbledPolished Mechanically polishedMirror Mechanically polished and buffed for a shiny surface3A Mechanically polished or as fabricated

1.1.38


1.1Surface specification for Alfa Laval Tri-Clover® UltraPure rangeUltraPure tubes and fittings

Surface texture (Ra µm) Standard designation

Alfa Laval

designation InternalWelded /

Bended areaExternal Turbular Machined

According to Treatment

Tri-Clover®

UltraPure

ASME-BPE

Tri-Clover®

UltraPure

Series A and

Series BPL < 0.5 < 0.5 < 0.8 SF1 SF1 ASME BPE Annealed XPM < 0.4 EP3) < 0.4 EP3) < 0.8 SF4 SF4 ASME BPE Annealed X

H3o/H3 < 0.8 < 0.8 < 1.6 H3o H3 DIN 11866 Annealed XH4o/H4 < 0.4 < 0.4 < 0.8 H4o H4 DIN 11866 Annealed X

HE4o/HE4 < 0.4 EP3) < 0.4 EP3) < 0.8 HE4o HE4 DIN 11866 Annealed X

3) Electro polished

* SF-Surface Finish. SF4: Ra < 0.375 EP

Conversion table - Surface finishCorrelation between Grit and Ra values

Ra (µm) Ra (µ inch) US Grit UK Grit3 125 1202 85 180

1.65 70 801.5 50 240

0.75 30 3200.62 25 1800.45 18 2400.40 15 5000.25 10 320

Material specification for Alfa Laval Sanitary rangeWetted steel parts

Dimension ranges

MaterialDIN 11850 ISO 2037 BS 4825 JIS G 3447


ASME

1.4301* (304) X X

1.4307* (304L) X X X X1.4401* (316) 1)

1.4404* (316L) X X X X304** X316L** X

1) Reducers and Reducing tees are only available in 1.4401 (316)

* According to DIN EN 10088-1

** According to ASTM A 269 and A 270.

Seal ring material for clamp fittings

Dimension ranges

MaterialDIN 11850 ISO 2037 BS 4825


ASMENBR X X XNitrile (Buna-N) XWhite Nitrile (White Buna-N) XEPDM X X X XFPM X X XViton® XPTFE X X X XSilicone (Q) X X X

1.1.39


1.1Material specification for Alfa Laval Tri-Clover® UltraPure rangeWetted steel parts

Dimension ranges

Material Tri-Clover® UltraPure

ASME-BPE

Tri-Clover® UltraPure

Series A/DIN


Series B/ ISO1.4404* (316L) X1.4435* (316L) X X

316L** X

* According to DIN EN 10088-1

** According to ASTM A 269 and A 270 S2. All Tri-Clover® UltraPure ASME BPEweld ends are also according to ASME BPE sulphur content

0.005-0.017%

Series A and B are available in Delta Ferrite class DF-1 and DF-3according to DIN 11866, see below

Delta Ferrite classes according to DIN 11866

DF-Class Delta Ferrite value1 ≤ 3,0%2 ≤ 1,0%3 ≤ 0,5%

Gasket material in fittings

Dimension ranges


ASME-BPE


Series A/ DIN


Series B/ ISONitrile (Buna-N) XWhite Nitrile (White Buna-N) XEPDM X4) X XFPM X XViton® X4)

White Viton® XPTFE X 3) 3)

Silicone (Q) X4)

3) PTFE only available for clamp gasket4) EPDM, Viton and Silicone available with USP Class 6 certificate - please request by order.

Chemical composition table

Material Grade Chemical composition in % by massMaterial

Number

StandardC Si Mn

P S N Cr Ni Mo

1.4404 DIN-EN

10088-1

≤ 0.030 ≤ 1.000 ≤ 2.00 0.045 ≤ 0.015 ≤ 0.11 16.50 -

18.50

10.00 -

13.00

2.00 - 2.50

1.4435 DIN-EN

10088-1

≤ 0.030 ≤ 1.000 ≤ 2.00 0.045 ≤ 0.015 ≤ 0.11 17.00 -

19.00

12.50 -

15.00

2.50 - 3.00

316L ASTM A 269 ≤ 0.035 ≤ 0.750 ≤ 2.00 0.040 ≤ 0.030 16.00 -

18.00

10.00 -

15.00

2.00 - 3.00

316L* ASTM BPE

/ ASTM A

270 S-2

≤ 0.035 ≤ 0.075 ≤ 2.00 0.040 0.005 -

0.017

16.00 -

18.00

10.00 -

10.00

2.00 - 3.00

*According to ASTM A 269 and A 270 S2. All Tri-Clover® UltraPure ASME BPEweld ends are also according to ASME BPE sulphur content

0.005-0.017%

1.1.40


1.1Pressure ratings (bar) for Alfa Laval Tri-Clover® Sanitary range

Dimension ranges

MaterialDIN 11850 ISO 2037 BS 4825 JIS G 3447


ASMETubes (20°C) 52-213* 55-130* 56-467* 56-351*Bends,Tees, Reducers (80/200°C) 25/15 25/15 25/15 25/15 25/15Nut unions (80/200°C) 25/15 25/15 25/15 25/15Flange unions (80/200°C) 25/15 25/15 25/15 25/15

* Tube pressure ratings depending on size (larger diameter smaller pressure rating)

Pressure ratings (bar) for Alfa Laval Tri-Clover® UltraPure range

Dimension ranges


ASME-BPE


Series A/ DIN


Series B/ ISOTubes (20°C) 56-351* 52-300* 54-320*Bends,Tees, Reducers (80/200°C) 25/15 25/15 25/15Nut unions (80/200°C) 25/15 25/15Flange unions (80/200°C) 25/15 25/15

* Tube pressure ratings depending on size (larger diameter smaller pressure rating)

Pressure ratings (bar) of Tri-Clamp® Connections

Service Ratings* (bar)Size Tube OD 1/2 & 3/4 inch 1 & 11/2 inch 2 inch 21/2 inch 3 inch 4 inch 6 inch

13MHLA (Screw tightened to maximum)at 20°C -- 10.3 10.3 10.3 10.3 10.3 --at 120°C -- 8.6 8.6 8.6 8.6 5.2 --13MHHM (Wing nut tightened to 2.8 Nm of torque)at 20°C -- 34.5 31.0 27.6 24.1 20.7 10.3at 120°C -- 20.7 20.7 13.8 13.4 10.3 5.213MHHS (Wing nut tightened to 2.8 Nm of torque)at 20°C 151.7 41.4 37.9 31.0 24.1 20.7 --at 120°C 82.7 20.7 19.0 15.5 12.1 10.3 --13MHP (Bolts tightened to 2.71 Nm of torque)at 20°C -- 103 68.9 68.9 68.9 85.7 20.7at 120°C -- 82.7 55.2 55.2 85.2 41.4 13.8A13MO (1-3" nuts tightened to 2.3 Nm., 4"-6" 3.4 Nm. of torque)at 20°C -- 34.5 24.1 20.7 13.8 10.3 5.2at 120°C -- 17.2 13.8 10.3 10.3 10.3 3.4A13MHM (Wing nut tightened to 2.8 Nm of torque)at 20°C -- 34.5 31 27.6 24.1 20.7 10.3at 120°C -- 20.7 17.2 13.8 12.1 10.3 5.2

* Service ratings are based on hydrostatic tests using standard-molded Buna-N material gaskets, with proper installation of ferrules, assembly of joints

and absence of shock pressure. Contact Alfa Laval for service of other type and material gaskets, and for ratings at higher temperatures.

All ratings shown are dependent upon related components within the systems and proper installation. For temperatures above 120° C, we

recommend using only 13MHP clamps.

1.1.41


1.1Pressure drop and flow velocity curves

Pressure drop in 100 m ISO 2037 and DIN 11850 tubes Flow velocity in ISO 2037 and DIN 11850 tubes

1.1.42

1.1 Sanitary, ISO 2037

The installation material in this section is manufactured to meet ISO 2037 tube dimensions.

Ordering LeafletsTubes ISO 2037 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1.44Reducers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1.45Bends . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1.47Hose Liners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1.50Tees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1.51SMS Union Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1.52Seal rings for SMS Union Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1.58ISO Union Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1.59DS Union Parts DS 720 tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1.61DIN Union Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1.64Clamp Union Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1.67Clamp Rings for Clamp Union Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1.69Flange connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1.70

Tubes ISO 2037 Sanitary, ISO 2037

1.1 Tubes of manufacturing lengths of approx 6 metersProduct code: 5102

Finish: BD and BC

Material

Item No.

RCPL EUR

pr. meter

Material

Item No.

RCPL

EURSize Dimension (mm)

1.4307 (304L) 1.4404 (316L) mm OD/ID x t BD finish Inch tubes ISO 20379611-81-9010 * 9611-81-9210 * 25 25/22.6 x 1.29611-81-9020 * 9611-81-9220 * 32 32/29.6 x 1.29611-81-9030 * 9611-81-9230 * 38 38/35.6 x 1.29611-81-9060 * 9611-81-9260 * 51 51/48.6 x 1.29611-81-9090 * 9611-81-9280 * 63.5 63.5/60.3 x 1.69611-81-9101 * 9611-81-9290 * 76.1 76.1/72.9 x 1.69611-81-9120 * 9611-81-9310 * 101.6 101.6/97.6 x 2.0

BC finish Inch tubes ISO 20379611-81-9008 * 9611-81-9868 * 25 25/22.6 x 1.29611-81-9862 * 9611-81-9869 * 32 32/29.6 x 1.29611-81-9863 * 9611-81-9870 * 38 38/35.6 x 1.29611-81-9864 * 9611-81-9871 * 51 51/48.6 x 1.29611-81-9865 * 9611-81-9872 * 63.5 63.5/60.3 x 1.69611-81-9866 * 9611-81-9873 * 76.1 76.1/72.9 x 1.69611-81-9867 * 9611-81-9874 * 101.6 101.6/97.6 x 2.0

* RCPL prices are updated monthly

Please contact your Alfa Laval contact person for further information.

1.1.44

Sanitary, ISO 2037 Reducers

1.1Product code: 5064 Finish: OD: Semi brightID: Semi bright

Material

Item No.

RCPL


1.4404 (316L) mm OD1/ID1 x t1 OD2/ID2 x t2 L Concentric reducer31317-0895-1 12.59 38/25 25/22.6 x 1.2 38/35.6 x 1.2 44.031317-0895-2 22.29 51/25 25/22.6 x 1.2 51/48.6 x 1.2 86.031317-0895-3 15.36 51/38 38/35.6 x 1.2 51/48.6 x 1.2 42.031317-0895-4 23.68 63.5/38 38/35.6 x 1.2 63.5/61.1 x 1.2 82.031317-0895-5 17.79 63.5/51 51/48.6 x 1.2 63.5/61.1 x 1.2 40.031317-0895-6 26.39 76.1/51 51/48.6 x 1.6 76.1/72.9 x 1.6 79.031317-0895-7 21.19 76.1/63.5 63.5/60.3 x 1.6 76.1/72.9 x 1.6 39.031317-0895-8 29.45 101.6/76.1 76.1/72.9 x 2.0 101.6/97.6 x 2.0 81.0

Eccentric reducer31317-0896-1 22.58 38/25 25/22.6 x 1.2 38/35.6 x 1.2 44.031317-0896-2 50.82 51/25 25/22.6 x 1.2 51/48.6 x 1.2 86.031317-0896-3 24.20 51/38 38/35.6 x 1.2 51/48.6 x 1.2 42.031317-0896-4 50.82 63.5/38 38/35.6 x 1.2 63.5/61.1 x 1.2 82.031317-0896-5 26.68 63.5/51 51/48.6 x 1.2 63.5/61.1 x 1.2 40.031317-0896-6 29.45 76.1/51 51/48.6 x 1.6 76.1/72.9 x 1.6 79.031317-0896-7 27.37 76.1/63.5 63.5/60.3 x 1.6 76.1/72.9 x 1.6 39.031317-0896-8 43.31 101.6/76.1 76.1/72.9 x 2.0 101.6/97.6 x 2.0 81.0

NOTE: For pressure and surface, please see PD-sheet.

Order boxes of 10 and get 25% off.

1.1.45

Reducers Sanitary, ISO 2037

1.1 Product code: 5064 Finish: OD: PolishedID: Raw

Item No.RCPL

EURItem No.

RCPL


1.4307 (304L) 1.4404 (316L) mm OD1/ID1 x t1 OD2/ID2 x t2 L Concentric reducer9612-9282-50 6.70 9612-9282-59 7.62 38.1/25.4 38.1/34.9 x 1.6 25.4/22.2 x 1.6 40.09612-9282-51 9.64 9612-9282-60 11.26 50.8/25.4 50.8/47.6 x 1.6 25.4/22.2 x 1.6 80.09612-9282-52 7.16 9612-9282-61 8.32 50.8/38.1 50.8/47.6 x 1.6 38.1/34.9 x 1.6 41.09612-9282-53 11.03 9612-9282-62 12.59 63.5/38.1 63.5/60.3 x 1.6 38.1/34.9 x 1.6 80.09612-9282-54 8.60 9612-9282-63 9.76 63.5/50.8 63.5/60.3 x 1.6 50.8/47.6 x 1.6 38.09612-9282-55 13.22 9612-9282-64 15.25 76.1/50.8 76.1/73.0 x 1.6 50.8/47.6 x 1.6 76.09612-9282-56 11.90 9612-9282-65 13.51 76.1/63.5 76.1/73.0 x 1.6 63.5/60.3 x 1.6 36.09612-9282-57 19.92 9612-9282-66 22.93 101.6/76.1 101.6/97.6 x 2.0 76.2/73.0 x 1.6 77.09612-9282-58 21.37 9612-9282-67 24.60 101.6/63.5 101.6/97.6 x 2.0 63.5/60.3 x 1.6 108.09612-9293-65 19.92 9612-9293-67 22.93 104/76.1 104/100 x 2.0 76.1/72.9 x 1.6 77.09612-9293-66 21.37 9612-9293-68 24.60 104/63.5 104/100 x 2.0 63.5/60.3 x 1.6 115.0

Concentric reducer9612-9282-74 7.85 38.1/25.4 38.1/34.9 x 1.6 25.4/22.2 x 1.6 97.09612-9282-75 11.84 50.8/38.1 50.8/47.6 x 1.6 38.1/34.9 x 1.6 97.09612-9282-76 8.43 50.8/25.4 50.8/47.6 x 1.6 25.4/22.2 x 1.6 115.09612-9282-77 11.84 63.5/50.8 63.5/60.3 x 1.6 50.8/47.6 x 1.6 97.09612-9282-78 10.16 63.5/38.1 63.5/60.3 x 1.6 38.1/34.9 x 1.6 120.09612-9282-79 16.23 76.2/63.5 76.1/73.0 x 1.6 63.5/60.3 x 1.6 97.09612-9282-80 15.19 76.2/50.8 76.1/73.0 x 1.6 50.8/47.6 x 1.6 115.09612-9282-81 13.22 76.2/38.1 76.1/73.0 x 2.0 38.1/34.9 x 1.6 130.09612-9282-82 24.60 101.6/76.2 101.6/97.6 x 2.0 76.2/73.0 x 1.6 120.09612-9282-83 22.93 101.6/63.5 101.6/97.6 x 2.0 63.5/60.3 x 1.6 140.09612-9282-84 27.14 101.6/50.8 101.6/97.6 x 2.0 50.8/47.6 x 1.6 150.09612-9293-69 24.60 104/76.1 104/100 x 2.0 76.2/73 x 1.6 120.09612-9293-70 22.93 104/63.5 104/100 x 2.0 63.5/60.3 x 1.6 140.09612-9293-71 27.14 104/50.8 104/100 x 2.0 50.8/47.6 x 1.6 150.0

Eccentric reducer9612-9282-85 8.72 38.1/25.4 38.1/34.9 x 1.6 25.4/22.2 x 1.6 100.09612-9282-86 13.80 50.8/38.1 50.8/47.6 x 1.6 38.1/34.9 x 1.6 100.09612-9282-87 8.72 50.8/25.4 50.8/47.6 x 1.6 25.4/22.2 x 1.6 120.09612-9282-88 14.21 63.5/50.8 63.5/60.3 x 1.6 50.8/47.6 x 1.6 105.09612-9282-89 10.63 63.5/38.1 63.5/60.3 x 1.6 38.1/34.9 x 1.6 140.09612-9282-90 17.50 76.2/63.5 76.1/73.0 x 1.6 63.5/60.3 x 1.6 105.09612-9282-91 15.19 76.2/50.8 76.1/73.0 x 1.6 50.8/47.6 x 1.6 135.09612-9282-92 29.45 101.6/76.2 101.6/97.6 x 2.0 76.2/73.0 x 1.6 135.09612-9282-93 25.64 101.6/63.5 101.6/97.6 x 2.0 63.5/60.3 x 1.6 170.09612-9293-72 29.45 104/76.1 104/100 x 2.0 76.2/73 x 1.6 135.09612-9293-73 25.64 104/63.5 104/100 x 2.0 63.5/60.3 x 1.6 170.0


Wall thickness is not according to ISO 2037.


1.1.46

Sanitary, ISO 2037 Bends

1.1Product code: 5004 Finish: OD: Semi brightID: Semi bright

Material

Item No.

RCPL

EUR

Material

Item No.

RCPL


1.4307 (304L) 1.4404 (316L) mm OD/ID x t L L1 R Bend 90° - (R = 1 x D)190683 7.68 191507 9.59 25 25/22.6 x 1.2 55.0 25.0190684 15.19 191508 19.87 32 32/29.6 x 1.2 65.0 32.0

31319-0210-1 9.64 31319-0211-1 12.19 38 38/35.6 x 1.2 70.0 38.031319-0218-1 11.43 31319-0219-1 14.09 51 51/48.6 x 1.2 82.0 51.031319-0226-1 16.11 31319-0227-1 20.10 63.5 63.5/60.3 x 1.6 105.0 64.031319-0234-1 27.08 31319-0235-1 33.50 76.1 76.0/72.0 x 2.0 110.0 76.0

Bend 90° - (R = 1 x D)190941 16.75 191699 19.17 25 25/22.6 x 1.2 55.0 255.0 25.0

31319-0266-1 20.73 31319-0267-1 23.68 38 38/35.6 x 1.2 70.0 270.0 38.031319-0274-1 24.77 31319-0275-1 29.45 51 51/48.6 x 1.2 82.0 282.0 51.031319-0282-1 38.12 31319-0283-1 39.85 63.5 63.5/60.3 x 1.6 105.0 305.0 64.031319-0290-1 54.86 31319-0291-1 62.37 76.1 76.1/72.1 x 2.0 110.0 310.0 76.031319-0723-1 175.56 31319-0723-2 221.76 101.6 101.6/97.6 x 2.0 150.0 350.0 149.0

Bend 90° - (R = 1.5 x D)9611-31-001-0 8.43 9611-31-001-1 10.51 25 25/22.6 x 1.2 65.0 37.59611-31-002-0 10.86 9611-31-002-1 13.22 38 38/35.6 x 1.2 85.0 57.09611-31-003-0 12.47 9611-31-003-1 15.82 51 51/48.6 x 1.2 110.0 76.59611-31-004-0 17.50 9611-31-004-1 21.66 63.5 63.5/60.3 x 1.6 135.0 95.39611-31-005-0 28.88 9611-31-005-1 36.38 76.1 76.1/72.9 x 1.6 155.0 114.29611-31-006-0 53.13 9611-31-006-1 66.99 101.6 101.6/97.6 x 2.0 195.0 152.5

Bend 90° - (R = 1.5 x D)9611-31-266-1 7.68 9611-31-267-1 9.59 25 25/22.6 x 1.2 38.0 37.59611-31-266-2 9.64 9611-31-267-2 12.19 38 38/35.6 x 1.2 57.0 57.09611-31-266-3 11.43 9611-31-267-3 14.09 51 51/48.6 x 1.2 76.0 76.59611-31-266-4 16.11 9611-31-267-4 20.10 63.5 63.5/60.3 x 1.6 95.0 95.39611-31-266-5 27.08 9611-31-267-5 33.50 76.1 76.1/72.9 x 1.6 114.0 114.29611-31-266-6 51.98 9611-31-267-6 64.68 101.6 101.6/97.6 x 2.0 152.0 152.5


Order Pallets and get 35% off (1" - 4") (DN25 - DN100)

1.1.47

Bends Sanitary, ISO 2037

1.1 Product code: 5004 Finish: OD: PolishedID: Raw

Material

Item No.

RCPL

EUR

Material

Item No.

RCPL

EURSize Dimension (mm) ID: Raw

1.4307 (304L) 1.4404 (316L) mm OD x t L R Bend 90° - (R = 1 x D)9612-0277-15 8.43 9612-0277-22 10.57 25 25.0 x 1.2 55.0 25.09612-0277-16 18.43 9612-0277-23 36.36 32 32.0 x 1.2 65.0 32.09612-0277-17 10.63 9612-0277-24 13.40 38 38.0 x 1.2 70.0 38.09612-0277-18 12.59 9612-0277-25 15.48 51 51.0 x 1.2 82.0 51.09612-0277-19 17.73 9612-0277-26 22.12 63.5 63.5 x 1.6 105.0 64.09612-0277-20 30.03 9612-0277-27 36.96 76.1 76.1 x 2.0 110.0 76.0

1.4404 (316L) Bend 90° - (R = 3 x D)9612-9282-68 8.03 25.4 25.4/22.9 x 1.25 115.0 75.09612-9282-69 9.41 31.8 31.8/29.3 x 1.25 136.0 93.09612-9282-70 10.91 38.1 38.1/35.6 x 1.25 140.0 115.09612-9282-71 14.73 50.8 50.8/48.3 x 1.25 225.0 150.09612-9282-72 20.21 63.5 63.5/60.5 x 1.50 240.0 185.09612-9282-73 26.57 76.0 76.0/72.8 x 1.60 250.0 215.0

1.4307 (304L) 1.4404 (316L) Bend 90° - (R = 1.5 x D)9613-4042-01 8.43 9613-4042-07 10.57 25 25/22.6 x 1.2 38.0 37.59613-4042-02 10.63 9613-4042-08 13.40 38 38/35.6 x 1.2 57.0 57.09613-4042-03 12.59 9613-4042-09 15.48 51 51/48.6 x 1.2 76.0 76.59613-4042-04 17.73 9613-4042-10 22.12 63.5 63.5/60.3 x 1.6 95.0 95.39613-4042-05 30.03 9613-4042-11 36.96 76.1 76.1/72.9 x 1.6 114.0 114.29613-4042-06 57.17 9613-4042-12 71.03 101.6 101.6/97.6 x 2.0 152.0 152.5



1.1.48

Sanitary, ISO 2037 Bends

1.1Product code: 5004 Finish: OD: PolishedID: Raw

Material

Item No.

RCPL

EUR

Material

Item No.

RCPL


Finish: OD: Semi bright

ID: Semi bright1.4307 (304L) 1.4404 (316L) mm OD/ID x t L1 L2 Bend 45°, OD/ID: Semi bright9611-30-0661 9.99 9611-30-0809 12.47 25 25/22.6 x 1.2 70.0 47.09611-30-0662 11.43 9611-30-0810 14.09 38 38/35.6 x 1.2 87.0 63.09611-30-0663 13.11 9611-30-0811 16.11 51 51/48.6 x 1.2 119.5 86.59611-30-0664 17.04 9611-30-0812 21.54 63.5 63.5/60.3 x 1.6 136.0 101.09611-30-0665 31.19 9611-30-0813 38.69 76.1 76.1/72.1 x 2.0 157.0 119.09611-30-0778 62.95 9611-30-0667 77.39 101.6 101.6/97.6 x 2.0 226.5 166.0

Bend 45°, OD/ID: Polished9613-4043-01 10.97 9613-4043-07 13.74 25 25/22.6 x 1.2 70.0 47.09613-4043-02 12.59 9613-4043-08 15.48 38 38/35.6 x 1.2 87.0 63.09613-4043-03 14.44 9613-4043-09 17.73 51 51/48.6 x 1.2 119.5 86.59613-4043-04 18.77 9613-4043-10 23.68 63.5 63.5/60.3 x 1.6 136.0 101.09613-4043-05 34.07 9613-4043-11 42.74 76.1 76.1/72.1 x 2.0 157.0 119.09613-4043-06 69.30 9613-4043-12 84.89 101.6 101.6/97.6 x 2.0 226.5 166.0




1.1.49

Hose Liners Sanitary, ISO 2037

1.1 Product code: 5086, 5018 Finish: OD: Semi brightID: Semi bright

Material

Item No.

RCPL


1.4404 (316L) mm OD1/ID1 x t1 OD2 E L R Hose liner, straightProduct code: 5086

191570 11.16 25 25/22.6 x 1.2 29.0 10.0 42.5191572 13.40 38 38/35.6 x 1.2 42.0 10.0 71.0191573 16.62 51 51/48.6 x 1.2 55.0 10.0 101.0191574 20.64 63.5 63.5/60.3 x 1.6 67.0 10.0 116.0191575 27.72 76.1 76.1/72.1 x 2.0 80.0 10.0 140.0

31317-0802-1 69.00 101.6 101.6/97.6 x 2.0 105.6 10.0 163.0

Product code: 5018 Hose liner, bend191596 15.54 25 25/22.6 x 1.2 29.0 10.0 55.0 25.0191598 19.06 38 38/35.6 x 1.2 42.0 10.0 70.0 38.0191599 26.78 51 51/48.6 x 1.2 55.0 10.0 82.0 51.0191600 55.13 63.5 63.5/60.3 x 1.6 67.0 10.0 105.0 63.5191601 85.05 76.1 76.1/72.1 x 2.0 80.0 10.0 110.0 76.0

31317-0568-1 211.05 101.6 101.6/97.6 x 2.0 105.6 10.0 150.0 150.0


1.1.50

Sanitary, ISO 2037 Tees

1.1Product code: 5022 Finish: OD: PolishedID: Polished

Material

Item No.

RCPL

EUR

Material

Item No.

RCPL


1.4307 (304L) 1.4404 (316L) mm OD/ID x t OD2 /ID2 x t2 L1 L2 Tee190725 13.46 191652 16.98 25 25/22.6 x 1.2 55.0190727 18.42 191654 22.93 38 38/35.6 x 1.2 70.0190728 20.79 191655 26.05 51 51/48.6 x 1.2 82.0190729 30.61 191656 38.12 63.5 63.5/60.3 x 1.6 105.0190730 38.12 191657 47.93 76.1 76.1/72.1 x 2.0 110.0

31317-0851-1 80.27 31317-0851-2 100.49 101.6 101.6/97.6 x 2.0 150.0

Tee, short outlet9611-30-2052 13.22 9611-30-2155 16.34 25 25/22.6 x 1.2 55.0 27.09611-30-2053 14.96 9611-30-2156 18.77 38 38/35.6 x 1.2 70.0 40.59611-30-2054 16.00 9611-30-2157 19.64 51 51/48.6 x 1.2 82.0 54.59611-30-2055 22.81 9611-30-2158 28.36 63.5 63.5/60.3 x 1.6 105.0 67.09611-30-2056 28.07 9611-30-2159 35.81 76.1 76.1/72.1 x 2.0 110.0 81.09611-30-2057 51.98 9611-30-2160 64.68 101.6 101.6/97.6 x 2.0 150.0 107.0

1.4404 (316L) mm OD1/ID1 x t1 OD2 /ID2 x t2 L1 L2 Tee, reduced31317-0806-1 17.79 51-38-51 51/48.6 x 1.2 38/35.6 x 1.2 82.0 70.031317-0807-1 26.68 63.5-38-63.5 63.5/60.3 x 1.6 38/35.6 x 1.2 105.0 70.031317-0808-1 28.01 63.5-51-63.5 63.5/60.3 x 1.6 51/48.6 x 1.2 105.0 82.031317-0809-1 39.27 76.1-38-76.1 76.1/72.1 x 2.0 38.1/34.9 x 1.6 110.0 80.031317-0810-1 39.85 76.1-51-76.1 76.1/72.1 x 2.0 50.8/47.6 x 1.6 110.0 82.0

Tee, reduced, short outlet31801-9039-1 19.87 38/25 38/35.6 x 1.2 25/22.6 x 1.2 70.0 40.731801-9039-2 23.10 51/25 51/48.6 x 1.2 25/22.6 x 1.2 82.0 54.131801-9039-3 23.62 51/38 51/48.6 x 1.2 38/35.6 x 1.2 82.0 54.131801-9039-4 29.45 63.5/25 63.5/60.3 x 1.6 25/22.6 x 1.2 105.0 66.531801-9039-5 29.45 63.5/38 63.5/60.3 x 1.6 38/35.6 x 1.2 105.0 67.631801-9039-6 35.81 63.5/51 63.5/60.3 x 1.6 51/48.6 x 1.2 105.0 66.531801-9039-7 53.13 76.1/25 76.1/72.1 x 2.0 25/21.8 x 1.6 110.0 79.331801-9039-8 36.38 76.1/38 76.1/72.1 x 2.0 38/34.8 x 1.6 110.0 80.631801-9039-9 44.47 76.1/51 76.1/72.1 x 2.0 51/47.3 x 1.6 110.0 80.631801-9040-1 36.38 76.1/63.5 76.1/72.1 x 2.0 63.5/60.3 x 1.6 110.0 80.031801-9040-2 84.32 101.6/25 101.6/97.6 x 2.0 25/21.8 x 1.6 150.0 105.031801-9040-3 66.99 101.6/38 101.6/97.6 x 2.0 38/34.8 x 1.6 150.0 106.631801-9040-4 73.34 101.6/51 101.6/97.6 x 2.0 51/47.8 x 1.6 150.0 106.631801-9040-5 65.84 101.6/63.5 101.6/97.6 x 2.0 63.5/60.3 x 1.6 150.0 106.631801-9040-6 97.02 101.6/76.1 101.6/97.6 x 2.0 76.1/72.9 x 1.6 150.0 106.69612-9277-40 45.05 104/25 104/100 x 2.0 25.4/21.4 x 2.0 150.0 108.09612-9277-41 45.05 104/38 104/100 x 2.0 38.1/34.1 x 2.0 150.0 110.09612-9277-42 45.05 104/51 104/100 x 2.0 50.8/46.8 x 2.0 150.0 110.09612-9277-43 45.05 104/63.5 104/100 x 2.0 63.5/59.5 x 2.0 150.0 112.09612-9277-44 45.05 104/76.1 104/100 x 2.0 76.1/72.1 x 2.0 150.0 112.0




1.1.51

SMS Union Parts Sanitary, ISO 2037

1.1 Product code: 5043 Finish: OD: Semi brightSeals: Nitrile

Thread: Round type

Material

Item No.

RCPL

EUR

Material

Item No.

RCPL


1.4307 (304L) 1.4404 (316L) mm OD/ID x t A B Union9611-30-0382 26.25 9611-33-0382 30.61 25 25/22.6 x 1.2 51.0 23.59611-30-0389 37.32 9611-33-0389 43.01 32 33.7/31.3 x 1.2 60.0 25.59611-30-0383 32.89 9611-33-0383 37.32 38 38/35.6 x 1.2 74.0 30.09611-30-0384 36.69 9611-33-0384 42.38 51 51/48.6 x 1.2 84.0 30.09611-30-0385 50.60 9611-33-0385 59.46 63.5 63.5/60.3 x 1.6 100.0 33.09611-30-0386 62.62 9611-33-0386 73.37 76.1 76.1/72.9 x 1.6 114.0 35.09611-30-0387 142.95 9611-33-0387 161.92 101.6 101.6/97.6 x 2.0 154.0 48.0

1.4301 (304) mm A B C D Nut190613 10.12 25 51.0 20.0 40 x 1/6 32.0190614 13.79 32 60.0 22.0 48 x 1/6 40.0190615 12.52 38 74.0 25.0 60 x 1/6 48.0190616 14.48 51 84.0 26.0 70 x 1/6 60.5190617 19.73 63.5 100.0 30.0 85 x 1/6 74.0190618 25.49 76.1 114.0 32.0 98 x 1/6 87.0

31317-0884-1 66.41 101.6 154.0 45.0 132 x 1/6 117.09612-9282-94 30.42 104 138.0 31.0 125 x 1/4 113.0

1.4307 (304L) 1.4404 (316L) mm OD/ID x t B C Male part190711 9.49 191001 12.27 25 25/22.6 x 1.2 15.0 40 x 1/6190712 13.79 191002 17.58 32 33.7/31.3 x 1.2 17.0 48 x 1/6190713 12.02 191003 14.99 38 38/35.6 x 1.2 20.0 60 x 1/6190714 13.09 191004 16.57 51 51/48.6 x 1.2 20.0 70 x 1/6190715 18.22 191005 23.15 63.5 63.5/60.3 x 1.6 24.0 85 x 1/6190716 21.51 191006 27.39 76.1 76.1/72.9 x 1.6 24.0 98 x 1/6

31317-0817-1 47.44 31317-0817-3 60.09 101.6 101.6/97.6 x 2.0 35.0 132 x 1/6

1.4307 (304L) 1.4404 (316L) mm OD/ID x t A B Liner190704 6.33 190994 7.91 25 25/22.6 x 1.2 35.5 7.5190705 9.17 190995 11.64 32 33.7/31.3 x 1.2 43.5 7.5190706 7.65 190996 9.99 38 38/35.6 x 1.2 55.0 9.0190707 8.98 190997 11.51 51 51/48.6 x 1.2 65.0 9.0190708 12.46 190998 15.69 63.5 63.5/60.3 x 1.6 80.0 9.0190709 15.43 190999 19.86 76.1 76.1/72.9 x 1.6 93.0 10.0

31317-0885-1 27.64 31317-0885-2 34.79 101.6 101.6/97.6 x 2.0 127.0 12.0TD 309-023

NOTE: Seal rings - please see later this chapter.



1.1.52

Sanitary, ISO 2037 SMS Union Parts

1.1Product code: 5043 Finish: OD: Semi brightSeals: Nitrile

Thread: Round typeConnections: Expanding ends

Material

Item No.

RCPL


1.4301 (304) mm A B C D Union190655 24.86 25 51.0 38.0 25.2190656 33.52 32 60.0 38.0 32.2190657 30.42 38 74.0 44.0 38.2190658 35.42 51 84.0 46.0 51.2190659 49.34 63.5 100.0 56.0 63.8190660 61.35 76.1 114.0 66.0 76.3

Nut190613 10.12 25 51.0 20.0 40 x 1/6 32.0190614 13.79 32 60.0 22.0 48 x 1/6 40.0190615 12.52 38 74.0 25.0 60 x 1/6 48.0190616 14.48 51 84.0 26.0 70 x 1/6 60.5190617 19.73 63.5 100.0 30.0 85 x 1/6 74.0190618 25.49 76.1 114.0 32.0 98 x 1/6 87.0

31317-0884-1 66.41 101.6 154.0 45.0 132 x 1/6 117.0

Male part190641 8.41 25 20.0 40 x 1/6 25.2190642 10.50 32 20.0 48 x 1/6 32.2190643 10.18 38 23.0 60 x 1/6 38.2190644 12.08 51 25.0 70 x 1/6 51.2190645 16.38 63.5 30.0 85 x 1/6 63.8190646 20.05 76.1 35.0 98 x 1/6 76.3

Liner190627 5.94 25 35.5 17.0 25.2190628 8.54 32 43.5 17.0 32.2190629 7.34 38 55.0 20.0 38.2190630 8.54 51 65.0 20.0 51.2190631 12.46 63.5 80.0 25.0 63.8190632 15.43 76.1 93.0 30.0 76.3




1.1.53


1.1 Product code: 5043 Finish: OD: Semi brightSeals: Nitrile

Thread: Round typeConnections: Expanding ends/welding ends

Material

Item No.

RCPL


1.4301 (304) mm A B C DExpanding Reducing

male part190129 39.85 38/25 38.0 23.0 60 x 1/6 25.2190156 46.17 51/25 51.0 25.0 70 x 1/6 25.2190159 48.70 51/38 51.0 25.0 70 x 1/6 38.2190160 66.41 63.5/38 63.5 30.0 85 x 1/6 38.2190161 57.56 63.5/51 63.5 30.0 85 x 1/6 51.2190162 84.76 76.1/51 76.0 35.0 98 x 1/6 51.2190163 102.47 76.1/63.5 76.0 35.0 98 x 1/6 63.8

1.4404 (316L) Expanding Reducing liner191669 18.66 38/25 55.0 17.0 25.2191670 30.55 51/25 65.0 17.0 25.2191675 27.07 51/38 65.0 20.0 38.2191671 54.40 63.5/25 80.0 17.0 25.2191676 55.66 63.5/38 80.0 20.0 38.2191678 52.50 63.5/51 80.0 20.0 51.2191677 68.31 76.1/38 93.0 20.0 38.2191679 73.37 76.1/51 93.0 20.0 51.2191680 68.31 76.1/63.5 93.0 25.0 63.8

1.4404 (316L) mm OD/ID x t A B C Reducing male part31317-0737-2 41.75 38/25 25/22.6 x 1.2 35.6 20.0 60 x 1/631317-0891-1 57.56 51/25 25/22.6 x 1.2 48.6 20.0 70 x 1/631317-0657-1 43.64 51/38 38/35.6 x 1.2 48.6 20.0 70 x 1/631317-0892-1 73.37 63.5/38 38/35.6 x 1.2 60.3 24.0 85 x 1/631317-0659-1 57.56 63.5/51 51/48.6 x 1.2 60.3 24.0 85 x 1/631317-0822-1 96.77 76.1/51 51/48.6 x 1.2 72.9 24.0 98 x 1/631317-0512-1 89.18 76.1/63.5 63.5/60.3 x 1.6 72.9 24.0 98 x 1/6

1.4404 (316L) mm OD/ID x t A B Reducing liner31317-0765-2 21.82 38/25 25/22.6 x 1.2 55.0 9.031317-0764-2 23.47 51/25 25/22.6 x 1.2 65.0 9.031317-0661-1 23.47 51/38 38/35.6 x 1.2 65.0 9.031317-0794-1 39.22 63.5/38 38/35.6 x 1.2 80.0 9.031317-0663-1 35.42 63.5/51 51/48.6 x 1.2 80.0 9.031317-0793-1 49.34 76.1/51 51/48.6 x 1.2 93.0 10.031317-0888-1 49.34 76.1/63.5 63.5/60.3 x 1.6 93.0 10.031317-0889-1 90.45 101.6/63.5 63.5/60.3 x 1.6 127.0 15.031317-0890-1 83.49 101.6/76.1 76.1/72.9 x 1.6 127.0 15.0




1.1.54


1.1Product code: 5043 Seals: Semi bright

Material

Item No.

RCPL

EUR

Material

Item No.

RCPL


1.4307 (304L) 1.4404 (316L) mm OD/ID x t A B Liner, long.9611-30-961-1 10.18 25 25/22.6 x 1.2 35.5 17.09611-30-961-3 11.26 38 38/35.6 x 1.2 55.0 20.09611-30-961-4 12.78 51 51/48.6 x 1.2 65.0 20.09611-30-961-5 17.39 63.5 63.5/60.3 x 1.6 80.0 25.09611-30-961-6 21.25 76.1 76.1/72.9 x 1.6 93.0 30.09611-30-961-7 39.85 101.6 101.6/97.6 x 2.0 127.0 35.0

1.4307 (304L) 1.4404 (316L) mm OD/ID x t B C Male part9613-4095-01 9.49 9613-4095-07 12.27 25 25/22.5 x 1.25 19.0 40 x 1/69613-4095-02 12.02 9613-4095-08 14.99 38 38/35.5 x 1.25 23.0 60 x 1/69613-4095-03 13.09 9613-4095-09 16.57 51 51/48.5 x 1.25 23.0 70 x 1/69613-4095-04 18.22 9613-4095-10 23.15 63.5 63.5/60.4 x 1.55 27.0 85 x 1/69613-4095-05 21.51 9613-4095-11 27.39 76.1 76.1/72.7 x 1.7 27.0 98 x 1/69613-4095-06 47.44 9613-4095-12 60.09 104 104/99.9 x 2.05 30.0 125 x 1/4

1.4307 (304L) 1.4404 (316L) mm A B C D Liner9613-4094-01 4.62 9613-4094-07 5.15 25 22.5 25.0 15.6 35.59613-4094-02 6.39 9613-4094-08 6.77 38 35.5 38.0 16.0 55.09613-4094-03 7.40 9613-4094-09 8.22 51 48.5 51.0 17.0 65.09613-4094-04 9.30 9613-4094-10 10.50 63.5 60.4 63.5 17.0 80.09613-4094-05 12.52 9613-4094-11 13.73 76.1 72.7 76.1 19.0 93.09613-4094-06 15.81 9613-4094-12 17.84 104 99.9 104.0 19.0 118.0

1.4307 (304L) 1.4404 (316L) mm OD1/ID1 x t1 B OD2 E Hose liner191577 23.72 25 25/22.6 x 1.2 50.0 29.0 10.0191579 35.42 38 38/35.6 x 1.2 80.0 42.0 10.0191580 36.05 51 51/48.6 x 1.2 110.0 55.0 10.0191581 75.27 63.5 63.5/60.3 x 1.6 125.0 67.0 10.0191582 80.96 76.1 76.1/72.1 x 2.0 150.0 80.0 10.0




1.1.55


1.1 Product code: 5043 Finish: Semi brightThread: Round type

Material

Item No.

RCPL

EUR

Material

Item No.

RCPL


1.4301 (304) 1.4404 (316L) mm A B C D End cap9612-1430-01 25.93 9612-1430-08 29.41 25 51.0 20.0 40 x 1/69612-1430-02 27.77 9612-1430-09 30.99 38 74.0 25.0 60 x 1/69612-1430-03 29.66 9612-1430-10 32.89 51 84.0 26.0 70 x 1/69612-1430-04 48.07 9612-1430-11 52.50 63.5 100.0 31.0 85 x 1/69612-1430-05 56.93 9612-1430-12 61.99 76.1 114.0 32.0 98 x 1/69612-1430-06 98.04 9612-1430-13 109.42 101.6 154.0 45.0 132 x 1/6

End cap with chain9612-1451-01 32.26 9612-1451-08 35.42 25 51.0 20.0 40 x 1/6 6.59612-1451-02 32.89 9612-1451-09 36.05 38 74.0 25.0 60 x 1/6 6.59612-1451-03 39.22 9612-1451-10 42.38 51 84.0 26.0 70 x 1/6 6.59612-1451-04 49.34 9612-1451-11 55.66 63.5 100.0 31.0 85 x 1/6 6.59612-1451-05 61.35 9612-1451-12 69.58 76.1 114.0 32.0 98 x 1/6 6.59612-1451-06 110.69 9612-1451-13 123.97 101.6 154.0 45.0 132 x 1/6 6.5

Blank190084 7.65 25 35.5 3.0190086 10.18 38 55.0 4.0190087 11.64 51 65.0 4.0190088 15.05 63.5 80.0 4.0190089 20.24 76.1 93.0 5.0

31317-0334-1 30.99 101.6 127.0 6.0




1.1.56


1.1Product code: 5043Product code: 5004, 5018

Finish: See below

Material

Item No.

RCPL

EURSize Dimension (mm) Finish: Semi bright

1.4307

(304L)mm A B C D E Adapter, male to BSP male

Product code: 5043190502 19.35 25 40 x 1/6 30.0 1" 22.5 15.0190506 29.98 38 60 x 1/6 42.0 11/2" 35.5 23.0190508 33.52 51 70 x 1/6 47.0 2" 48.5 28.0190510 137.89 63.5 85 x 1/6 55.0 21/2" 60.5 32.0

Adapter, male to BSP female190514 22.26 25 40 x 1/6 15.0 1" 22.5 23.0190518 34.16 38 60 x 1/6 22.0 11/2" 35.5 32.0190520 39.22 51 70 x 1/6 27.0 2" 48.5 38.0190522 154.33 63.5 85 x 1/6 31.0 21/2" 60.5 42.0

Material

Item No.

RCPL

EUR

Material

Item No.

RCPL


Finish: Semi bright

Thread: Round type1.4307

(304L)

1.4404

(316L)mm OD/ID x t A B

Short bend, ends nut/liner

and maleProduct code: 5004

190760 57.17 191029 68.72 25 25/22.6 x 1.2 55.0 55.0190762 66.99 191031 83.16 38 38/35.6 x 1.2 70.0 70.0190763 54.86 191032 99.91 51 51/48.6 x 1.2 82.0 82.0190764 111.46 191033 118.39 63.5 63.5/60.3 x 1.6 105.0 105.0190765 147.26 191034 169.21 76.1 76.1/72.1 x 2.0 110.0 110.0

1.4404

(316L)mm OD1/ID1 x t1 A B OD2 E Bend with hose end and liner

Product code: 5018191603 32.03 25 25/22.6 x 1.2 62.0 55.0 29.0 10.0191605 50.93 38 38/35.6 x 1.2 79.0 70.0 42.0 10.0191606 42.53 51 51/48.6 x 1.2 91.0 82.0 55.0 10.0191607 92.40 63.5 63.5/60.3 x 1.6 114.0 105.0 67.0 10.0




1.1.57

Seal rings for SMS Union Parts Sanitary, ISO 2037

1.1 Product code: 5043

Item No.RCPL

EURItem No.

RCPL

EURItem No.

RCPL


NBR EPDM FPM mm A B D Seal ring190601 0.39 31317-0375-3 0.77 31317-0375-2 6.33 25 32.0 5.5 24.8190602 0.80 31317-0376-2 4.06 9611-99-1306 18.85 32 40.0 5.5 31.8190603 0.39 31317-0377-2 0.77 191661 10.50 38 48.0 5.5 37.8190604 0.51 31317-0378-5 1.02 31317-0378-2 17.08 51 61.0 5.5 50.8190605 0.51 31317-0379-3 1.51 31317-0379-2 20.18 63.5 73.5 5.5 63.2190606 0.63 31317-0380-3 1.78 31317-0380-1 26.38 76.1 86.0 5.5 75.5

31317-0886-1 2.28 31317-0886-2 5.06 31317-0886-3 53.76 101.6 114.0 5.5 101.09611-99-4547 2.28 9611-99-4546 5.06 9611-99-4548 53.76 104 116.0 5.5 104

PTFE Seal ring31317-0551-1 2.65 25 32.0 4.0 25.031317-0551-2 3.62 32 40.0 4.0 32.031317-0551-3 3.16 38 48.0 4.0 38.031317-0551-4 4.04 51 61.0 4.0 51.031317-0551-5 6.58 63.5 73.5 4.0 63.531317-0551-6 8.92 76.1 86.0 4.0 76.131317-0551-7 11.13 101.6 114.0 4.0 101.6

NBR Seal ring190608 3.16 25 32.0 5.0 22.5190609 4.62 32 40.0 5.0 29.571066 3.70 38 48.0 5.0 35.571068 4.84 51 61.0 5.0 48.5

190610 6.33 63.5 73.5 5.0 60.5190611 8.48 76.1 86.0 5.0 72.0

31317-0886-5 22.29 101.6 114.0 5.0 97.6

PTFE Seal ring190987 3.16 25 32.0 4.0 22.5190988 5.98 32 40.0 4.0 29.5190989 3.92 38 48.0 4.0 35.5190990 6.58 51 61.0 4.0 48.5190991 8.03 63.5 73.5 4.0 60.5190992 10.50 76.1 86.0 4.0 72.0

31317-0517-1 12.27 101.6 114.0 4.0 97.6190993 33.50 108 120.0 4.0 100.0


1.1.58

Sanitary, ISO 2037 ISO Union Parts

1.1Product code: 5041 Finish: Semi brightSeals: Nitrile

Thread: Trapezoidal type

Material

Item No.

RCPL

EUR

Material

Item No.

RCPL


1.4404 (316L) mm OD/ID x t A B Union9611-33-0955 32.26 25 25.6/22.5 x 1.55 48.0 35.59611-33-0956 36.05 38 38.6/35.5 x 1.55 64.0 35.59611-33-0957 39.22 51 51.6/48.5 x 1.55 77.0 35.59611-33-0958 48.70 63.5 64.1/60.5 x 1.8 91.0 35.59611-33-0959 55.66 76.1 76.6/72.0 x 2.3 106.0 35.59611-33-0960 120.81 101.6 102.5/97.6 x 2.45 135.0 45.0

1.4301 (304) mm A B C D Nut31319-0001-1 12.84 25 48.0 30.0 38.3 x 1/8 30.531319-0002-1 13.66 38 64.0 30.0 51.8 x 1/8 43.531319-0003-1 15.62 51 77.0 30.0 65.3 x 1/8 57.031319-0004-1 17.96 63.5 91.0 30.0 78.8 x 1/8 70.731319-0005-1 20.30 76.1 106.0 30.0 92.3 x 1/8 83.39611-30-0149 48.70 101.6 135.0 30.0 119.4 x 1/8 110.0

1.4404 (316L) mm OD/ID x t B C Male part31319-0062-1 10.06 25 25.6/22.5 x 1.55 21.5 37.1 x 1/831319-0063-1 12.08 38 38.6/35.5 x 1.55 21.5 50.6 x 1/831319-0015-3 13.41 51 51.6/48.5 x 1.55 21.5 64.1 x 1/831319-0016-3 17.71 63.5 64.1/60.5 x 1.8 21.5 77.6 x 1/831319-0017-3 19.10 76.1 76.6/72.0 x 2.3 21.5 91.1 x 1/89611-30-0899 40.48 101.6 102.5/97.6 x 2.45 21.5 118.4 x 1/8

1.4404 (316L) mm OD/ID x t A B Liner31319-0068-1 7.78 25 25.6/22.5 x 1.55 33.8 12.031319-0069-1 9.36 38 38.6/35.5 x 1.55 47.0 12.031319-0027-3 9.36 51 51.6/48.5 x 1.55 60.5 12.031319-0071-1 11.89 63.5 64.1/60.5 x 1.8 74.0 12.031319-0072-1 14.36 76.1 76.6/72 x 2.3 87.5 12.09611-30-0898 28.40 101.6 102.5/97.6 x 2.45 114.1 21.5




1.1.59

ISO Union Parts Sanitary, ISO 2037

1.1 Product code: 5041 Finish: Semi bright

Material

Item No.

RCPL


1.4404 (316L) mm A B D Blank9611-30-829-0 6.96 25 33.8 10.5 29.09611-30-829-1 8.35 38 47.0 10.5 42.59611-30-829-2 11.07 51 60.5 10.5 56.09611-30-829-3 18.79 63.5 74.0 10.5 69.79611-30-829-4 20.68 76.1 87.5 10.5 82.39611-30-829-5 37.32 101.6 114.1 10.5 108.4

D


Item No.RCPL

EURItem No.

RCPL

EURItem No.

RCPL


NBR EPDM mm A B D Seal ring9611-99-0953 1.28 9611-99-1390 1.49 25 32.5 6.0 23.69611-99-0954 1.28 9611-99-1392 1.49 38 46.0 6.0 36.69611-99-0955 1.28 9611-99-1393 1.49 51 59.5 6.0 49.69611-99-0956 1.28 9611-99-1394 1.49 63.5 73.2 6.0 61.39611-99-0957 1.61 9611-99-1395 2.18 76.1 86.5 6.0 73.99611-99-0959 2.41 9611-99-1397 2.99 101.6 112.5 6.0 98.6

PTFE mm A B D Seal ring9611-99-1424 2.52 25 32.5 6.0 22.89611-99-1426 3.80 38 46.0 6.0 35.99611-99-1427 5.06 51 59.9 6.0 48.99611-99-1428 6.45 63.5 73.0 6.0 60.99611-99-1429 7.21 76.1 86.5 6.0 73.39611-99-1431 9.36 101.6 113.0 6.0 98.0

NBR EPDM FPM mm A B D Seal ring31319-0031-1 1.28 31319-0031-4 1.49 31319-0031-3 3.45 25 32.5 7.0 25.531319-0032-1 1.28 31319-0032-4 1.49 31319-0032-3 3.45 38 46.0 7.0 38.031319-0033-1 1.28 31319-0033-4 1.49 31319-0033-3 3.45 51 59.5 7.0 51.031319-0034-1 1.28 31319-0034-4 1.49 31319-0034-3 3.45 63.5 73.0 7.0 63.031319-0035-1 1.61 31319-0035-4 1.95 31319-0035-3 3.67 76.1 86.5 7.0 75.5

TD 317-018_1


1.1.60

Sanitary, ISO 2037 DS Union Parts DS 720 tubes


Thread: Round type

Material

Item No.

RCPL

EUR

Material

Item No.

RCPL


1.4404 (316L) mm OD/ID x t A B Union9611-33-0264 36.05 25 25.4/22.5 x 1.45 57.0 30.09611-33-0265 43.64 38 38.4/35.5 x 1.45 71.0 31.59611-33-0266 53.76 51 51.4/48.5 x 1.45 86.0 31.59611-33-0267 70.84 63.5 63.9/60.5 x 1.7 103.0 36.59611-33-0268 85.39 76.1 76.4/72.0 x 2.2 115.0 36.59611-33-0269 198.61 101.6 102/97.6 x 2.2 150.0 36.5

1.4301 (304) mm A B C D Nut9611-30-0197 10.50 25 57.0 20.0 44 x 1/6 35.09611-30-0198 11.13 38 71.0 20.0 58 x 1/6 48.59611-30-0199 14.36 51 86.0 22.0 72 x 1/6 62.59611-30-0200 18.34 63.5 103.0 24.0 88 x 1/6 76.59611-30-0201 21.51 76.1 115.0 25.0 100 x 1/6 88.59611-30-0263 75.27 101.6 150.0 28.0 130 x 1/6 117.0

1.4404 (316L) mm OD/ID x t B C Male part9611-33-0684 14.48 25 25.4/22.5 x 1.45 18.5 44 x 1/69611-33-0685 17.39 38 38.4/35.5 x 1.45 20.0 58 x 1/69611-33-0686 21.00 51 51.4/48.5 x 1.45 20.0 72 x 1/69611-33-0687 31.25 63.5 63.9/60.5 x 1.7 24.0 88 x 1/69611-33-0688 36.69 76.1 76.4/72.0 x 2.2 24.0 100 x 1/69611-33-0690 77.17 101.6 102/97.6 x 2.2 24.0 130 x 1/6

C

1.4404 (316L) mm OD/ID x t A B Liner9611-33-0691 10.50 25 25.4/22.5 x 1.45 40.0 11.09611-33-0692 14.67 38 38.4/35.5 x 1.45 54.0 11.09611-33-0693 17.39 51 51.4/48.5 x 1.45 68.0 11.09611-33-0694 20.05 63.5 63.9/60.5 x 1.7 84.0 12.09611-33-0695 26.31 76.1 76.4/72.0 x 2.2 96.0 12.09611-33-0697 42.38 101.6 102/97.6 x 2.2 124.0 12.0




1.1.61

DS Union Parts DS 720 tubes Sanitary, ISO 2037

1.1 Product code: 5042 Finish: Semi brightSeals: Nitrile


Material

Item No.

RCPL


1.4301 (304) mm A B C D Male part9611-30-0203 9.80 25 20.0 44 x 1/6 25.09611-30-0204 11.13 38 22.0 58 x 1/6 38.09611-30-0205 12.27 51 24.0 72 x 1/6 51.09611-30-0206 17.33 63.5 26.0 88 x 1/6 63.59611-30-0207 21.00 76.1 28.0 100 x 1/6 76.0

Liner9611-30-0209 6.45 25 40.0 16.0 25.09611-30-0210 7.59 38 54.0 18.0 38.09611-30-0211 10.18 51 68.0 20.0 51.09611-30-0212 15.12 63.5 84.0 22.0 63.5.9611-30-0213 17.33 76.1 96.0 24.0 76.0

Material

Item No.

RCPL


1.4301 (304) mm A B D D1 Expanding Reducing liner9611-30-0224 18.66 38/25 54.0 30.0 25.0 35.59611-30-0225 43.01 51/25 68.0 32.0 25.0 48.59611-30-0226 28.46 51/38 68.0 32.0 38.0 48.59611-30-0227 54.40 63.5/38 84.0 42.0 38.0 60.59611-30-0228 41.75 63.5/51 84.0 33.0 51.0 60.59611-30-0229 72.11 76/51 96.0 44.0 51.0 72.09611-30-0230 69.58 76/63.5 96.0 35.0 63.5 72.0

1.4301 (304) mm A B End cap for chain9611-30-352-0 56.93 25 57.0 20.09611-30-353-0 60.72 38 71.0 20.09611-30-354-0 69.58 51 86.0 22.09611-30-355-0 101.83 63.5 103.0 24.09611-30-356-0 122.07 76.1 115.0 25.0




1.1.62

Sanitary, ISO 2037 DS Union Parts DS 720 tubes

1.1Product code: 5042 Finish: Semi brightThread: Round type

Connections: Expanding ends

Material

Item No.

RCPL

EUR

Material

Item No.

RCPL


1.4404 (316L) mm A B Blank9611-30-0253 9.68 25 40.0 3.09611-30-0254 10.56 38 54.0 3.09611-30-0255 13.28 51 68.0 3.09611-30-0256 16.70 63.5 84.0 4.09611-30-0257 18.22 76.1 96.0 4.09611-30-0259 27.32 101.6 124.0 4.0


Item No.RCPL

EURItem No.

RCPL


NBR EPDM mm A B D Seal ring9611-99-0120 1.02 9611-99-2814 3.98 25 32.0 4.5 25.09611-99-0121 1.14 9611-99-2816 3.80 38 47.0 4.5 38.09611-99-0122 1.14 9611-99-2817 3.80 51 59.0 4.5 51.09611-99-0123 1.14 9611-99-2818 6.58 63.5 74.5 4.5 63.59611-99-0124 1.14 9611-99-2819 9.17 76.1 88.0 4.5 76.19611-99-0558 3.04 9611-99-2820 12.46 101.6 112.5 4.5 101.6

PTFE FPM mm A B D Seal ring9611-99-1167 4.04 9611-99-2833 48.07 25 32.0 4.5 25.09611-99-1168 4.18 9611-99-2835 48.07 38 47.0 4.5 38.09611-99-1170 5.57 9611-99-2836 48.07 51 59.0 4.5 51.09611-99-1171 7.08 9611-99-2837 48.07 63.5 74.5 4.5 63.59611-99-1172 12.52 9611-99-2838 48.07 76.1 88.0 4.5 76.19611-99-1173 25.24 9611-99-2839 48.07 101.6 112.5 4.5 101.6


1.1.63

DIN Union Parts Sanitary, ISO 2037


Thread: Round type

Material

Item No.

RCPL

EUR

Material

Item No.

RCPL


1.4301 (304) mm A B C D Nut31318-0014-1 8.03 25 63.0 21.0 52 x 1/6 36.031318-0014-2 8.54 32 70.0 21.0 58 x 1/6 42.031318-0014-3 9.17 40 78.0 21.0 65 x 1/6 49.031318-0014-4 10.69 50 92.0 22.0 78 x 1/6 62.031318-0014-5 16.76 65 112.0 25.0 95 x 1/6 80.09611-30-644-0 26.00 75 120.0 26.0 104 x 1/6 87.031318-0014-6 26.25 80 127.0 30.0 110 x 1/4 94.031318-0014-8 36.18 100 148.0 31.0 130 x 1/4 115.0

1.4307 (304L) 1.4404 (316L) mm OD/ID x t B C Male part9612-1579-01 8.22 9612-1579-17 10.56 25 25.4/22.9 x 1.25 29.0 52 x 1/69612-1579-02 19.29 9612-1579-18 23.47 32 31.8/29.3 x 1.25 32.0 58 x 1/69612-1579-03 10.12 9612-1579-19 12.78 40 38.1/35.1 x 1.5 33.0 65 x 1/69612-1579-04 11.51 9612-1579-20 14.67 50 50.8/47.8 x 1.5 35.0 78 x 1/69612-1579-05 17.52 9612-1579-21 22.77 65 63.5/60.5 x 1.5 40.0 95 x 1/69612-1579-06 26.31 9612-1579-22 34.79 75 76.1/73.1 x 1.5 40.0 104 x 1/69612-1579-07 34.16 9612-1579-23 41.75 80 76.1/72.1 x 2.0 45.0 110 x 1/49612-1579-08 42.38 9612-1579-24 64.52 100 101.6/97.6 x 2.0 54.0 130 x 1/4

1.4307 (304L) 1.4404 (316L) mm OD/ID x t A B Liner9612-1580-01 5.57 9612-1580-17 6.96 25 25.4/22.9 x 1.25 44.0 22.09612-1580-02 11.39 9612-1580-18 15.12 32 31.8/29.3 x 1.25 50.0 25.09612-1580-03 6.83 9612-1580-19 8.79 40 38.1/35.1 x 1.5 56.0 26.09612-1580-04 8.03 9612-1580-20 10.37 50 50.8/47.8 x 1.5 68.5 28.09612-1580-05 13.09 9612-1580-21 17.33 65 63.5/60.5 x 1.5 86.0 32.09612-1580-06 20.18 9612-1580-22 29.92 75 76.1/73.1 x 1.5 93.7 32.09612-1580-07 25.93 9612-1580-23 54.40 80 76.1/72.1 x 2.0 100.0 37.09612-1580-08 31.06 9612-1580-24 47.44 100 101.6/97.6 x 2.0 121.0 44.0




1.1.64

Sanitary, ISO 2037 DIN Union Parts


Thread: Round type

Material

Item No.

RCPL


1.4301 (304) mm A B C D Male part9611-30-0977 12.46 25 29.0 52 x 1/6 25.29611-30-632-0 14.74 32 32.0 58 x 1/6 32.29611-30-0978 10.12 40 33.0 65 x 1/6 38.29611-30-0979 11.51 50 35.0 78 x 1/6 51.29611-30-0980 26.25 65 40.0 95 x 1/6 63.89611-30-633-0 51.23 75 40.0 104 x 1/6 76.39611-30-0981 39.22 80 45.0 110 x 1/4 76.39611-30-0983 64.52 100 54.0 130 x 1/4 101.9

Liner9611-30-0984 5.57 25 44.0 22.0 25.29611-30-638-0 9.49 32 50.0 25.0 32.29611-30-0985 6.83 40 56.0 26.0 38.29611-30-0986 8.03 50 68.0 28.0 51.29611-30-0987 19.61 65 86.0 32.0 63.89611-30-639-0 30.17 75 95.0 32.0 76.39611-30-0988 34.16 80 100.0 37.0 76.39611-30-0990 31.06 100 121.0 44.0 101.9

Material

Item No.

RCPL

EUR

Material

Item No.

RCPL


1.4307 (304L) 1.4404 (316L) mm OD/ID x t B C Male part31318-0007-2 8.22 31318-0007-1 10.56 25 25.0/22.6 x 1.2 22.0 52 x 1/631318-0008-2 19.29 31318-0008-1 24.54 32 33.7/31.3 x 1.2 22.0 58 x 1/631318-0009-2 10.12 31318-0009-1 12.78 40 38/35.6 x 1.2 22.0 65 x 1/631318-0010-2 11.51 31318-0010-1 14.67 50 51/48.6 x 1.2 22.0 78 x 1/631318-0011-2 17.52 31318-0011-1 22.77 65 63.5/60.3 x 1.6 25.0 95 x 1/69611-30-602-0 30.17 9611-30-602-1 69.58 75 76.1/73.1 x 1.5 30.0 104 x 1/631318-0012-2 25.93 31318-0012-1 34.79 80 76.1/72.9 x 1.6 30.0 110 x 1/431318-0034-2 48.70 31318-0034-1 55.66 100 101.6/97.6 x 2.0 30.0 130 x 1/4

1.4307 (304L) 1.4404 (316L) mm OD/ID x t A B Liner31318-0018-2 5.57 31318-0018-1 6.96 25 25.0/22.6 x 1.2 44.0 18.09611-30-0721 12.40 9611-33-0721 15.81 32 33.7/31.3 x 1.2 50.0 15.031318-0019-2 6.83 31318-0019-1 8.79 40 38/35.6 x 1.2 56.0 18.031318-0020-2 8.03 31318-0020-1 10.37 50 51/48.6 x 1.2 68.0 20.031318-0021-2 13.09 31318-0021-1 17.33 65 63.5/60.3 x 1.6 86.0 20.09611-30-607-0 24.22 9611-30-607-1 51.23 75 76.1/73.1 x 1.5 95.0 20.031318-0022-2 22.71 31318-0022-1 54.40 80 76.1/72.9 x 1.6 100.0 20.0.31318-0023-2 31.06 31318-0023-1 49.34 100 101.6/97.6 x 2.0 121.0 23.0




1.1.65

DIN Union Parts Sanitary, ISO 2037


Thread: Round type

Material

Item No.

RCPL


1.4404 (316L) mm OD1/ID1 x t1 A B ID2 Reducing liner, semi bright9611-30-735-0 52.50 32/25 25.0/22.6 x 1.2 50.0 18.0 32.09611-30-735-1 54.40 40/25 25.0/22.6 x 1.2 56.0 18.0 38.09611-30-735-2 61.35 40/32 33.7/31.3 x 1.2 56.0 18.0 38.09611-30-735-3 38.58 50/38 38.0/35.6 x 1.2 68.0 20.0 50.09611-30-735-4 80.96 65/51 51.0/48.6 x 1.2 86.0 20.0 66.09611-30-735-5 105.00 80/51 51.0/48.6 x 1.2 100.0 20.0 81.09611-30-735-6 109.42 80/63.5 63.5/60.3 x 1.6 100.0 20.0 81.09611-30-735-7 173.94 100/76.1 76.1/72.9 x 1.6 121.0 23.0 100.0

1.4404 (316L) mm OD1/ID1 x t1 B C ID2Reducing male part,

Semi bright9611-30-734-0 75.27 32/25 25.0/22.6 x 1.2 22.0 58 x 1/6 32.09611-30-734-1 77.80 40/25 25.0/22.6 x 1.2 22.0 65 x 1/6 38.09611-30-734-2 80.96 40/32 33.7/31.3 x 1.2 22.0 65 x 1/6 38.09611-30-734-3 96.77 50/38 38.0/35.6 x 1.2 22.0 78 x 1/6 50.09611-30-734-4 130.93 65/51 51.0/48.6 x 1.2 27.0 95 x 1/6 66.09611-30-734-5 180.90 80/51 51.0/48.6 x 1.2 32.0 110 x 1/4 81.09611-30-734-6 172.67 80/63.5 63.5/60.3 x 1.6 32.0 110 x 1/4 81.09611-30-734-7 230.23 100/76.1 76.1/72.9 x 1.6 33.0 130 x 1/4 100.0

Item No.RCPL

EURItem No.

RCPL

EURItem No.

RCPL


NBR EPDM FPM mm A B D Seal ring527346-04 0.39 9611-99-1269 0.39 9611-99-1864 1.78 25 40.0 5.0 30.0527346-05 0.39 9611-99-1270 0.39 9611-99-1865 2.73 32 46.0 5.0 36.0527346-06 0.39 9611-99-1271 0.39 9611-99-1866 2.78 40 52.0 5.0 42.0527346-07 0.51 9611-99-1272 0.89 9611-99-1867 2.78 50 64.0 5.0 54.0527346-08 0.51 9611-99-1273 0.89 9611-99-1868 4.66 65 81.0 5.0 71.0

9611-99-1264 1.02 9611-99-1274 1.26 9611-99-1869 25.55 75 88.0 5.0 78.0527346-09 1.02 9611-99-1275 1.26 9611-99-1128 5.81 80 95.0 5.0 85.0527346-11 1.02 9611-99-1276 1.26 9611-99-1870 8.92 100 114.0 6.0 104.0

Silicone (Q) PTFE mm A B D Seal ring9611-99-1920 0.51 9611-99-1876 1.40 25 40.0 5.0 30.09611-99-1921 0.51 9611-99-1877 1.78 32 46.0 5.0 36.09611-99-1922 0.51 9611-99-1878 1.88 40 52.0 5.0 42.09611-99-1923 1.02 9611-99-1879 3.55 50 64.0 5.0 54.09611-99-1924 1.02 9611-99-1880 5.76 65 81.0 5.0 71.09611-99-1925 1.52 9611-99-1881 12.78 75 88.0 5.0 78.09611-99-1926 1.52 9611-99-1882 6.83 80 95.0 5.0 85.09611-99-1927 1.52 9611-99-1883 11.07 100 114.0 6.0 104.0



1.1.66

Sanitary, ISO 2037 Clamp Union Parts

1.1Product code: 5045 Finish: Semi bright

Material

Item No.

RCPL

EUR

Material

Item No.

RCPL


1.4307 (304L) 1.4404 (316L) mm OD/ID x t A B Clamp ferrule ISO 28529611-31-019-1 9.80 9611-31-019-0 11.13 25 25.6/22.6 x 1.5 50.5 21.59611-31-020-1 9.99 9611-31-020-0 11.51 38 38.6/35.6 x 1.5 50.5 21.59611-31-021-1 11.13 9611-31-021-0 13.09 51 51.6/48.6 x 1.5 64.0 21.59611-31-022-1 13.79 9611-31-022-0 15.94 63.5 64.1/60.3 x 1.9 77.5 21.59611-31-023-1 17.33 9611-31-023-0 19.86 76.1 76.7/72.9 x 1.9 91.0 21.59611-31-024-1 33.52 9611-31-024-0 39.22 101.6 102.5/97.6 x 2.45 119.0 21.59611-31-031-1 105.63 9611-31-031-0 122.71 114.3 115.6/110.3 x 2.65 130.0 28.09611-31-032-1 88.36 9611-31-032-0 111.32 139.7 141.2/135.7 x 2.75 155.0 28.09611-31-033-1 124.60 9611-31-033-0 144.21 168.3 170.0/163.1 x 3.45 183.0 28.0

Clamp ferrule9612-9901-07 11.13 25 25/22.6 x 1.20 50.5 21.59612-9901-08 11.51 38 38/35.6 x 1.20 50.5 21.59612-9901-09 13.09 51 51/48.6 x 1.20 64.0 21.59612-9901-10 15.94 63.5 63.5/60.3 x 1.60 77.5 21.59612-9901-11 19.86 76.1 76.1/72.9 x 1.60 91.0 21.59612-9901-12 39.22 101.6 101.6/97.6 x 2.0 119.0 21.5

1.4301 (304) mm A B D Clamp ferrule9611-31-066-0 12.52 25 50.5 20.0 25.09611-31-067-0 13.79 38 50.5 20.0 38.09611-31-068-0 17.20 51 64.0 25.0 51.09611-31-069-0 26.00 63.5 77.5 30.0 63.59611-31-070-0 39.22 76.1 91.0 30.0 76.1

1.4404 (316L) mm OD/ID x t A B Clamp reducing ferrule9611-31-050-0 19.86 38 - 25 25.6/22.6 x 1.5 50.5 12.09611-31-051-0 21.63 38 - 32 32.6/29.6 x 1.5 50.5 12.09611-31-053-0 55.66 51 - 38 38.6/35.6 x 1.5 64.0 12.09611-31-055-0 66.41 63.5 - 51 51.6/48.6 x 1.5 77.5 12.09611-31-057-0 101.20 76.1 - 63.5 64.1/60.3 x 1.9 91.0 12.0




1.1.67

Clamp Union Parts Sanitary, ISO 2037

1.1 Product code: 5045 Finish: Semi bright

Material

Item No.

RCPL

EUR

Material

Item No.

RCPL


1.4307 (304L) 1.4404 (316L) mm A B Blank9611-34-059-0 7.34 9611-34-060-0 11.89 25-38 50.4 6.49611-34-059-1 9.80 9611-34-060-1 15.12 51 63.9 6.49611-34-059-2 13.09 9611-34-060-2 17.33 63.5 77.4 6.49611-34-059-3 15.37 9611-34-060-3 22.71 76.1 90.9 6.4

210506 44.31 9611-34-060-4 37.32 101.6 118.9 6.4Not available 9612-4640-01 313.72 168.3 183.0 11.0

Item No.RCPL

EURItem No.

RCPL

EURItem No.

RCPL


NBR EPDM FPM mm A B D Seal ring9611-99-0765 1.88 9611-99-1358 2.40 9611-99-1890 26.31 25 52.7 5.5 22.89611-99-0766 1.88 9611-99-1359 2.40 9611-99-1891 26.31 38 52.7 5.5 35.89611-99-0767 2.28 9611-99-1360 2.78 9611-99-1892 30.42 51 66.2 5.5 48.89611-99-0768 2.40 9611-99-1361 3.04 9611-99-1893 43.64 63.5 79.7 5.5 60.59611-99-0769 2.53 9611-99-1362 3.40 9611-99-1894 52.50 76.1 93.2 5.5 73.19611-99-0770 3.55 9611-99-1363 5.68 9611-99-1895 64.52 101.6 121.2 5.5 97.89611-99-1354 5.10 9611-99-1364 5.94 9611-99-1896 68.31 114.3 132.2 5.5 110.59611-99-1355 5.10 9611-99-1365 6.12 9611-99-1897 63.53 139.7 157.2 5.5 135.99611-99-1356 5.42 9611-99-1366 6.33 9611-99-1898 71.47 168.3 185.2 5.5 163.39611-99-1357 5.17 9611-99-1367 8.29 9611-99-1899 85.80 219.1 235.7 5.5 214.1

B

PTFE mm A B DSeal ring

- (Modified ISO 2852, type A)9611-99-1403 7.59 25 52.7 5.1 22.69611-99-1404 7.59 38 52.7 5.1 35.69611-99-1405 9.49 51 66.2 5.1 48.69611-99-1406 10.18 63.5 79.7 5.1 60.39611-99-1407 11.26 76.1 93.2 5.1 72.99611-99-1408 16.57 101.6 121.2 5.1 97.6

B



1.1.68

Sanitary, ISO 2037 Clamp Rings for Clamp Union Parts

1.1Product code: 5049

Material

Item No.

RCPL


1.4301 (304) mm A B C A13MHM - Clamp ring211053 21.76 25/38 90.9 63.8 54.0211054 25.78 51 103.9 77.4 67.1211055 31.63 63.5 117.6 90.4 81.0211056 35.84 76.1 130.9 103.6 94.5211057 40.04 101.6 159.5 132.6 122.2

13MHHM Clamp ring212195 41.55 25/38 54.0212196 50.53 51 67.5212197 59.50 63.5 81.0212198 66.48 76.1 94.5212199 77.45 101.6 122.6

Clamp ring, wingnut9611-99-4453 25.48 25/38 54.09611-99-4454 31.04 51 67.59611-99-4455 35.76 63.5 81.09611-99-4456 42.15 76.1 94.59611-99-4457 49.80 101.6 122.6

13MW - Light clamp ring9612-0119-02 32.00 25/38 90.0 58.5 52.39612-0119-03 35.84 51 99.0 72.0 65.09612-0119-04 39.50 63.5 112.5 85.5 79.29612-0119-05 59.23 76.1 126.0 99.0 93.09612-0119-06 62.66 101.6 154.0 127.0 120.7

Clamp ring (Allen Screws)9611-31-105-1 9.77 25-38 85.5 58.59611-31-105-2 9.77 51 99.0 72.09611-31-105-3 10.09 63.5 112.5 85.59611-31-105-4 13.10 76.1 126.0 99.09611-31-105-5 13.28 101.6 154.0 127.09611-31-105-6 34.49 114.3 165.0 138.09611-31-105-7 31.67 139.7 198.0 164.09611-31-105-8 35.76 168.3 226.0 192.09611-31-105-9 37.68 219.1 280.5 243.5





1.1.69

Flange connections Sanitary, ISO 2037

1.1 Product code: 5058 Finish: Semi brightSeals: EPDM

Material

Item No.

RCPL

EURSize

Pressure

classDimension (mm)

1.4404 (316L) mm PN (bar) OD/ID x t A B C Complete flange9612-4987-10 60.09 25 16 25/22.6 x 1.2 79.0 50.0 4 x M89612-4987-11 74.64 38 16 38/35.6 x 1.2 79.0 50.0 4 x M89612-4987-12 84.12 51 16 51/48.6 x 1.2 99.0 50.0 4 x M89612-4987-13 108.16 63.5 10 63.5/60.3 x 1.6 117.0 50.0 4 x M89612-4987-14 127.77 76.1 10 76.1/72.9 x 1.6 132.0 50.0 4 x M89612-4987-15 152.43 101.6 10 101.6/97.6 x 2.0 160.0 50.0 8 x M8

1.4404 (316L) mm OD/ID x t B E F Flange with O-ring groove9612-4930-10 25.11 25 25/22.6 x 1.2 25.0 10.0 64.09612-4930-11 36.05 38 38/35.6 x 1.2 25.0 10.0 64.09612-4930-12 40.48 51 51/48.6 x 1.2 25.0 10.0 84.09612-4930-13 52.50 63.5 63.5/60.3 x 1.6 25.0 10.0 102.09612-4930-14 62.62 76.1 76.1/72.9 x 1.6 25.0 10.0 117.09612-4930-15 74.00 101.6 101.6/97.6 x 2.0 25.0 10.0 143.0

Flange without O-ring groove9612-4929-10 32.26 25 25/22.6 x 1.2 25.0 10.0 64.09612-4929-11 36.05 38 38/35.6 x 1.2 25.0 10.0 64.09612-4929-12 40.48 51 51/48.6 x 1.2 25.0 10.0 84.09612-4929-13 52.50 63.5 63.5/60.3 x 1.6 25.0 10.0 102.09612-4929-14 62.62 76.1 76.1/72.9 x 1.6 25.0 10.0 117.09612-4929-15 74.00 101.6 101.6/97.6 x 2.0 25.0 10.0 143.0

Blank for flange9612-4931-10 58.19 25 10.0 64.09612-4931-11 60.72 38 10.0 64.09612-4931-12 72.11 51 10.0 84.09612-4931-13 87.92 63.5 10.0 102.09612-4931-14 134.09 76.1 10.0 117.09612-4931-15 171.41 101.6 10.0 143.0




1.1.70

Sanitary, ISO 2037 Flange connections

1.1Product code: 5058

Item No.RCPL

EURItem No.

RCPL

EURItem No.

RCPL


Silicone (Q) EPDM FPM mm A B C Flange seal9612-4026-41 1.02 9612-4026-31 1.02 9612-4026-51 1.64 25 33.7 4.1 23.99612-4026-42 1.14 9612-4026-32 1.14 9612-4026-52 1.64 38 46.7 4.1 36.99612-4026-43 1.40 9612-4026-33 1.40 9612-4026-53 2.04 51 59.7 4.1 49.99612-4026-44 1.51 9612-4026-34 1.51 9612-4026-54 2.28 63.5 71.7 4.1 61.99612-4026-45 2.04 9612-4026-35 2.04 9612-4026-55 2.53 76.1 83.2 4.1 73.49612-4026-46 2.53 9612-4026-36 2.53 9612-4026-56 4.04 101.6 108.8 4.1 99.0

Flange size Screws Nuts Screws and nut set9612-4993-01 1.26 25-76.1 4xM8 x 30 4 x M89612-4993-02 2.53 101.6 8xM8 x 30 8 x M8


1.1.71

1.1.72

1.2 Sanitary, DIN 11850

The installation material in this section is manufactured to meet DIN 11850 tube dimensions.

Ordering LeafletsTubes DIN 11850 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2.74Reducers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2.76Bends . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2.79Tees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2.83DIN Union Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2.87Seal rings for DIN Union Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2.97Other fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2.99Clamp Union Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2.100Clamp Rings for Clamp Union Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2.101Flange connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2.103Aseptic Union Parts DIN 11864-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2.105

Tubes DIN 11850 Sanitary, DIN 11850

1.2

Tubes of manufacturing lengths of approx 6 metersProduct code: 5108

Material

Item No.

RCPL

EUR

pr. meter

Material

Item No.

RCPL

EUR

pr. meter

Size

DNDimension (mm)

1.4307 (304L) 1.4404 (316L) mm OD/ID x tBD finish, DIN 11850 tubes,

2nd series9611-81-9440 * 9611-81-9592 * 15 19/16 x 1.59611-81-9442 * 9611-81-9594 * 20 23/20 x 1.59611-81-9133 * 9611-81-9596 * 25 29/26 x 1.59611-81-9443 * 9611-81-9598 * 32 35/32 x 1.59611-81-9444 * 9611-81-9544 * 40 41/38 x 1.59611-81-9445 * 9611-81-9554 * 50 53/50 x 1.59611-81-9170 * 9611-81-9365 * 65 70/66 x 2.09611-81-9175 * 9611-81-9375 * 80 85/81 x 2.09611-81-9184 * 9611-81-9388 * 100 104/100 x 2.0

BD finish, DIN tubes not according to standard9611-81-9430 * 9611-81-9452 * 15 18/15 x 1.59611-81-9441 * 9611-81-9453 * 20 22/19 x 1.59611-81-9135 * 9611-81-9582 * 25 28/25 x 1.59611-81-9145 * 9611-81-9584 * 32 34/31 x 1.59611-81-9155 * 9611-81-9586 * 40 40/37 x 1.59611-81-9165 * 9611-81-9588 * 50 52/49 x 1.5

BC finish, DIN 11850 tubes, 2nd series9611-81-9798 * 9611-81-9647 * 15 19/16 x 1.59611-81-9800 * 9611-81-9648 * 20 23/20 x 1.59611-81-9802 * 9611-81-9649 * 25 29/26 x 1.59611-81-9804 * 9611-81-9650 * 32 35/32 x 1.59611-81-9806 * 9611-81-9651 * 40 41/38 x 1.59611-81-9808 * 9611-81-9652 * 50 53/50 x 1.59611-81-9171 * 9611-81-9363 * 65 70/66 x 2.09611-81-9176 * 9611-81-9656 * 80 85/81 x 2.09611-81-9186 * 9611-81-9657 * 100 104/100 x 2.0

BC finish, DIN tubes not according to standard9611-81-9797 * 9611-81-9809 * 15 18/15 x 1.59611-81-9799 * 9611-81-9941 * 20 22/19 x 1.59611-81-9801 * 9611-81-9653 * 25 28/25 x 1.59611-81-9803 * 9611-81-9654 * 32 34/31 x 1.59611-81-9805 * 9611-81-9655 * 40 40/37 x 1.59611-81-9807 * 9611-81-9934 * 50 52/49 x 1.5



1.2.74

Sanitary, DIN 11850 Tubes DIN 11850

1.2

Tubes of manufacturing lengths of approx 6 metersProduct code: 5108

Material

Item No.

RCPL

EUR

pr. meter

Material

Item No.

RCPL

EUR

pr. meter

Size

DNDimension (mm)

1.4301 (304) 1.4404 (316L) mm OD/ID x tCC finish, DIN 11850 tubes,

2nd series9611-81-9683 * 9611-81-9528 * 15 19/16 x 1.59611-81-9684 * 9611-81-9529 * 20 23/20 x 1.59611-81-9519 * 9611-81-9627 * 25 29/26 x 1.59611-81-9520 * 9611-81-9628 * 32 35/32 x 1.59611-81-9521 * 9611-81-9629 * 40 41/38 x 1.59611-81-9522 * 9611-81-9630 * 50 53/50 x 1.59611-81-9689 * 9611-81-9631 * 65 70/66 x 2.09611-81-9690 * 9611-81-9632 * 80 85/81 x 2.09611-81-9691 * 9611-81-9633 * 100 104/100 x 2.09611-81-9692 * 9611-81-9634 * 125 129/125 x 2.09611-81-9693 * 9611-81-9534 * 150 154/150 x 2.0

CC finish, DIN tubes not according to standard9611-81-9517 * 9611-81-9625 * 15 18/15 x 1.59611-81-9518 * 9611-81-9626 * 20 22/19 x 1.59611-81-9523 * 9611-81-9503 * 25 28/25 x 1.59611-81-9524 * 9611-81-9504 * 32 34/31 x 1.59611-81-9525 * 9611-81-9505 * 40 40/37 x 1.59611-81-9526 * 9611-81-9506 * 50 52/49 x 1.5

CD finish, DIN 11850 tubes, 2nd series9611-81-9660 * 9611-81-9413 * 15 19/16 x 1.59611-81-9661 * 9611-81-9414 * 20 23/20 x 1.59611-81-9674 * 9611-81-9435 * 25 29/26 x 1.59611-81-9675 * 9611-81-9436 * 32 35/32 x 1.59611-81-9676 * 9611-81-9437 * 40 41/38 x 1.59611-81-9677 * 9611-81-9438 * 50 53/50 x 1.59611-81-9425 * 9611-81-9450 * 65 70/66 x 2.09611-81-9426 * 9611-81-9451 * 80 85/81 x 2.09611-81-9427 * 9611-81-9935 * 100 104/100 x 2.09611-81-9428 * 9611-81-9936 * 125 129/125 x 2.09611-81-9429 * 9611-81-9449 * 150 154/150 x 2.0

CD finish, DIN tubes not according to standard9611-81-9672 * 9611-81-9433 * 15 18/15 x 1.59611-81-9673 * 9611-81-9434 * 20 22/19 x 1.59611-81-9678 * 9611-81-9439 * 25 28/25 x 1.59611-81-9679 * 9611-81-9466 * 32 34/31 x 1.59611-81-9680 * 9611-81-9467 * 40 40/37 x 1.59611-81-9681 * 9611-81-9468 * 50 52/49 x 1.5



1.2.75

Reducers Sanitary, DIN 11850

1.2

Product code: 5068 Finish: OD: Semi brightID: Raw

Material

Item No.

RCPL

EUR

Material

Item No.

RCPL

EUR

Size

DNDimension (mm)

1.4307 (304L) 1.4404 (316L) mm A B C Concentric reducer9612-6485-01 5.60 9612-6486-01 6.76 15/10 15.0 9.0 16.09612-6485-02 6.47 9612-6486-02 9.93 20/10 19.0 9.0 25.09612-6485-03 5.42 9612-6486-03 6.18 20/15 19.0 15.0 17.09612-6485-04 15.25 9612-6486-04 24.66 25/10 25.0 9.0 29.59612-6485-05 6.93 9612-6486-05 9.07 25/15 25.0 15.0 17.09612-6485-06 6.81 9612-6486-06 8.60 25/20 25.0 19.0 19.59612-6485-07 7.33 9612-6486-07 9.53 32/15 31.0 15.0 22.09612-6485-08 6.29 9612-6486-08 8.32 32/20 31.0 19.0 22.09612-6485-09 4.68 9612-6486-09 9.30 32/25 31.0 25.0 20.09612-6485-10 23.97 9612-6486-10 30.61 40/15 37.0 15.0 45.09612-6485-11 6.24 9612-6486-11 9.76 40/20 37.0 19.0 33.59612-6485-12 6.70 9612-6486-12 7.80 40/25 37.0 25.0 28.09612-6485-13 6.24 9612-6486-13 7.33 40/32 37.0 31.0 28.09612-6485-14 8.60 9612-6486-14 10.80 50/25 49.0 25.0 44.09612-6485-15 7.85 9612-6486-15 10.86 50/32 49.0 31.0 32.09612-6485-16 6.99 9612-6486-16 8.43 50/40 49.0 37.0 37.09612-6485-17 27.66 9612-6486-17 32.92 65/25 66.0 25.0 58.59612-6485-18 27.32 9612-6486-18 32.92 65/32 66.0 31.0 52.09612-6485-19 9.70 9612-6486-19 13.92 65/40 66.0 37.0 38.09612-6485-20 9.24 9612-6486-20 11.38 65/50 66.0 49.0 31.09612-6485-21 43.89 9612-6486-21 49.67 80/25 81.0 25.0 89.59612-6485-22 42.74 9612-6486-22 49.67 80/32 81.0 31.0 83.09612-6485-23 33.50 9612-6486-23 42.16 80/40 81.0 37.0 61.09612-6485-24 15.77 9612-6486-24 19.46 80/50 81.0 49.0 31.59612-6485-25 12.19 9612-6486-25 14.50 80/65 81.0 66.0 31.59612-6485-26 54.29 9612-6486-26 69.88 100/25 100.0 25.0 112.09612-6485-27 53.13 9612-6486-27 65.26 100/32 100.0 31.0 105.59612-6485-28 43.89 9612-6486-28 61.22 100/40 100.0 37.0 91.59612-6485-29 42.74 9612-6486-29 50.82 100/50 100.0 49.0 87.09612-6485-30 20.10 9612-6486-30 24.49 100/65 100.0 66.0 54.09612-6485-31 19.64 9612-6486-31 19.23 100/80 100.0 81.0 38.09612-6485-32 94.13 9612-6486-32 120.70 125/25 125.0 25.0 147.59612-6485-33 92.98 9612-6486-33 118.97 125/32 125.0 31.0 141.09612-6485-34 75.08 9612-6486-34 116.66 125/40 125.0 37.0 127.09612-6485-35 64.68 9612-6486-35 87.78 125/50 125.0 49.0 122.59612-6485-36 62.95 9612-6486-36 80.85 125/65 125.0 66.0 89.59612-6485-37 35.23 9612-6486-37 45.62 125/80 125.0 81.0 61.09612-6485-38 25.76 9612-6486-38 34.07 125/100 125.0 100.0 36.09612-6485-39 76.81 9612-6486-39 105.68 150/65 150.0 66.0 129.09612-6485-40 76.23 9612-6486-40 93.56 150/80 150.0 81.0 93.09612-6485-41 43.31 9612-6486-41 58.33 150/100 150.0 100.0 66.59612-6485-42 26.28 9612-6486-42 36.38 150/125 150.0 125.0 40.09612-6485-43 133.98 9612-6486-43 167.48 200/100 200.0 100.0 134.09612-6485-44 123.01 9612-6486-44 159.39 200/125 200.0 125.0 107.59612-6485-45 101.64 9612-6486-45 134.56 200/150 200.0 150.0 68.0



1.2.76

Sanitary, DIN 11850 Reducers

1.2

Product code: 5068 Finish: OD: MatID: Mat

Material

Item No.

RCPL

EUR

Material

Item No.

RCPL

EUR

Size

DNDimension (mm)

1.4307 (304L) 1.4404 (316L) mm A B C9612-6485-46 4.70 9612-6486-46 6.01 15/10 15.0 9.0 16.09612-6485-47 5.72 9612-6486-47 9.30 20/10 19.0 9.0 25.09612-6485-48 4.85 9612-6486-48 5.54 20/15 19.0 15.0 17.09612-6485-49 13.51 9612-6486-49 23.50 25/10 25.0 9.0 29.59612-6485-50 5.95 9612-6486-50 8.14 25/15 25.0 15.0 17.09612-6485-51 6.01 9612-6486-51 7.80 25/20 25.0 19.0 19.59612-6485-52 6.35 9612-6486-52 8.60 32/15 31.0 15.0 22.09612-6485-53 5.38 9612-6486-53 7.33 32/20 31.0 19.0 22.09612-6485-54 4.24 9612-6486-54 8.84 32/25 31.0 25.0 20.09612-6485-55 20.50 9612-6486-55 26.57 40/15 37.0 15.0 45.09612-6485-56 6.12 9612-6486-56 8.95 40/20 37.0 19.0 33.59612-6485-57 5.95 9612-6486-57 6.93 40/25 37.0 25.0 28.09612-6485-58 5.65 9612-6486-58 6.70 40/32 37.0 31.0 28.09612-6485-59 7.57 9612-6486-59 10.05 50/25 49.0 25.0 44.09612-6485-60 6.93 9612-6486-60 9.99 50/32 49.0 31.0 32.09612-6485-61 6.29 9612-6486-61 7.74 50/40 49.0 37.0 37.09612-6485-62 24.49 9612-6486-62 30.03 65/25 66.0 25.0 58.59612-6485-63 24.37 9612-6486-63 30.03 65/32 66.0 31.0 52.09612-6485-64 8.32 9612-6486-64 12.82 65/40 66.0 37.0 38.09612-6485-65 8.32 9612-6486-65 10.40 65/50 66.0 49.0 31.09612-6485-66 38.69 9612-6486-66 46.78 80/25 81.0 25.0 89.59612-6485-67 38.12 9612-6486-67 46.78 80/32 81.0 31.0 83.09612-6485-68 29.45 9612-6486-68 37.54 80/40 81.0 37.0 61.09612-6485-69 14.21 9612-6486-69 17.96 80/50 81.0 49.0 31.59612-6485-70 11.03 9612-6486-70 13.34 80/65 81.0 66.0 31.59612-6485-71 49.09 9612-6486-71 64.68 100/25 100.0 25.0 112.09612-6485-72 48.51 9612-6486-72 60.64 100/32 100.0 31.0 105.59612-6485-73 82.58 9612-6486-73 56.60 100/40 100.0 37.0 91.59612-6485-74 36.96 9612-6486-74 45.05 100/50 100.0 49.0 87.09612-6485-75 18.19 9612-6486-75 23.27 100/65 100.0 66.0 54.09612-6485-76 13.86 9612-6486-76 17.50 100/80 100.0 81.0 38.09612-6485-77 88.36 9612-6486-77 114.35 125/25 125.0 25.0 147.59612-6485-78 87.78 9612-6486-78 112.04 125/32 125.0 31.0 141.09612-6485-79 73.92 9612-6486-79 105.68 125/40 125.0 37.0 127.09612-6485-80 60.64 9612-6486-80 82.58 125/50 125.0 49.0 122.59612-6485-81 57.17 9612-6486-81 75.65 125/65 125.0 66.0 129.09612-6485-82 32.34 9612-6486-82 43.31 125/80 125.0 81.0 61.09612-6485-83 22.75 9612-6486-83 31.19 125/100 125.0 100.0 36.09612-6485-84 71.03 9612-6486-84 101.06 150/65 150.0 66.0 129.09612-6485-85 71.03 9612-6486-85 88.36 150/80 150.0 81.0 93.09612-6485-86 38.69 9612-6486-86 54.29 150/100 150.0 100.0 66.59612-6485-87 22.35 9612-6486-87 31.76 150/125 150.0 125.0 40.09612-6485-88 124.74 9612-6486-88 158.24 200/100 200.0 100.0 134.09612-6485-89 108.57 9612-6486-89 144.95 200/125 200.0 125.0 107.59612-6485-90 97.02 9612-6486-90 125.90 200/150 200.0 150.0 68.0



1.2.77

Reducers Sanitary, DIN 11850

1.2

Product code: 5068 Finish: See below

Material

Item No.

RCPL

EUR

Material

Item No.

RCPL

EUR

Size

DNDimension (mm)

Finish: OD: Semi bright

ID: Raw1.4307 (304L) 1.4404 (316L) mm A B C Eccentric9612-6487-43 10.28 9612-6487-64 12.01 15/10 16.0 10.0 11.59612-6487-44 11.20 9612-6487-65 12.94 20/15 20.0 16.0 9.09612-6487-45 13.74 9612-6487-66 15.88 25/15 26.0 16.0 19.09612-6487-46 13.46 9612-6487-67 15.36 25/20 26.0 20.0 11.09612-6487-47 16.05 9612-6487-68 18.31 32/20 32.0 20.0 22.09612-6487-48 13.46 9612-6487-69 16.23 32/25 32.0 26.0 11.09612-6487-49 15.59 9612-6487-70 16.23 40/25 38.0 26.0 21.59612-6487-50 15.88 9612-6487-71 16.63 40/32 38.0 32.0 11.09612-6487-51 31.76 9612-6487-72 35.81 50/25 50.0 26.0 44.09612-6487-52 31.19 9612-6487-73 34.07 50/32 50.0 32.0 33.59612-6487-53 15.71 9612-6487-74 18.88 50/40 50.0 38.0 23.09612-6487-54 35.23 9612-6487-75 39.27 65/40 66.0 38.0 55.59612-6487-55 19.00 9612-6487-76 23.10 65/50 66.0 50.0 33.09612-6487-56 42.16 9612-6487-77 46.78 80/50 81.0 50.0 62.59612-6487-57 23.50 9612-6487-78 26.91 80/65 81.0 66.0 30.09612-6487-58 54.86 9612-6487-79 62.37 100/65 100.0 66.0 67.59612-6487-59 31.76 9612-6487-80 35.23 100/80 100.0 81.0 38.09612-6487-60 77.39 9612-6487-81 83.16 125/80 125.0 81.0 86.59612-6487-61 44.47 9612-6487-82 49.09 125/100 125.0 100.0 49.09612-6487-62 65.26 9612-6487-83 94.13 150/100 150.0 100.0 98.59612-6487-63 36.38 9612-6487-84 50.82 150/125 150.0 125.0 50.0

Material

Item No.

RCPL

EUR

Material

Item No.

RCPL

EUR

Size

DNDimension (mm)

Finish: OD: Mat

ID: Mat1.4307 (304L) 1.4404 (316L) mm A B C Eccentric reducer9612-6487-01 9.76 9612-6487-22 10.86 15/10 16.0 10.0 11.59612-6487-02 10.86 9612-6487-23 13.98 20/15 20.0 16.0 9.09612-6487-03 13.17 9612-6487-24 15.30 25/15 26.0 16.0 19.09612-6487-04 12.88 9612-6487-25 14.73 25/20 26.0 20.0 11.09612-6487-05 15.94 9612-6487-26 17.73 32/20 32.0 20.0 22.09612-6487-06 12.82 9612-6487-27 15.25 32/25 32.0 26.0 11.09612-6487-07 14.78 9612-6487-28 15.42 40/25 38.0 26.0 21.59612-6487-08 14.78 9612-6487-29 15.94 40/32 38.0 32.0 11.09612-6487-09 31.19 9612-6487-30 35.23 50/25 50.0 26.0 44.09612-6487-10 30.61 9612-6487-31 32.92 50/32 50.0 32.0 33.59612-6487-11 14.84 9612-6487-32 18.13 50/40 50.0 38.0 23.09612-6487-12 34.07 9612-6487-33 38.69 65/40 66.0 38.0 55.59612-6487-13 18.19 9612-6487-34 22.81 65/50 66.0 50.0 33.09612-6487-14 39.85 9612-6487-35 45.62 80/50 81.0 50.0 62.59612-6487-15 22.58 9612-6487-36 25.99 80/65 81.0 66.0 30.09612-6487-16 54.29 9612-6487-37 61.22 100/65 100.0 66.0 67.59612-6487-17 30.61 9612-6487-38 17.09 100/80 100.0 81.0 38.09612-6487-18 76.23 9612-6487-39 81.43 125/80 125.0 81.0 86.59612-6487-19 42.74 9612-6487-40 47.93 125/100 125.0 100.0 49.09612-6487-20 63.53 9612-6487-41 92.40 150/100 150.0 100.0 98.59612-6487-21 35.23 9612-6487-42 49.09 150/125 150.0 125.0 50.0



1.2.78

Sanitary, DIN 11850 Bends

1.2

Product code: 5007 Finish: OD: PolishedID: Raw

Material

Item No.

RCPL

EUR

Material

Item No.

RCPL

EUR

Size

DNDimension (mm)

1.4307 (304L) 1.4404 (316L) mm OD/IDxt L R Bend 90°, 2nd series9612-1545-58 11.67 9612-1545-08 17.96 10 13/10x1.5 38.0 26.09612-1545-59 11.67 9612-1545-09 17.96 15 19/16x1.5 47.0 35.09612-1545-60 11.67 9612-1545-10 17.96 20 23/20x1.5 52.0 40.09612-1545-61 8.45 9612-1545-11 12.78 25 29/26x1.5 70.0 50.09612-1545-62 12.37 9612-1545-12 22.87 32 35/32x1.5 78.0 55.09612-1545-63 9.30 9612-1545-13 13.92 40 41/38x1.5 85.0 60.09612-1545-64 11.55 9612-1545-14 17.50 50 53/50x1.5 97.0 70.09611-30-406-0 16.34 9611-30-406-2 24.89 65 70/66x2.0 110.0 80.09611-30-408-0 43.31 9611-30-408-2 65.84 80 85/81x2.0 118.0 90.09611-30-409-0 56.66 9611-30-409-2 84.72 100 104/100x2.0 140.0 100.0

Bend 90°9611-30-412-0 11.67 9611-30-412-2 17.96 10 12/9x1.5 38.0 26.09611-30-413-0 11.67 9611-30-413-2 17.96 15 18/15x1.5 47.0 35.09611-29-392-1 11.67 9611-29-392-2 17.96 20 22/19x1.5 52.0 40.09611-30-414-0 8.45 9611-30-414-2 12.78 25 28/25x1.5 70.0 50.09611-30-415-0 12.37 9611-30-415-2 22.87 32 34/31x1.5 78.0 55.09611-30-416-0 9.30 9611-30-416-2 13.92 40 40/37x1.5 85.0 60.09611-30-417-0 11.55 9611-30-417-2 17.50 50 52/49x1.5 97.0 70.0

Bend 90°, acc. to DIN 11852, 2nd series9612-1505-58 8.84 9612-1505-08 10.22 10 13/10x1.5 26.0 26.09612-1505-59 8.84 9612-1505-09 10.22 15 19/16x1.5 35.0 35.09612-1505-60 8.84 9612-1505-10 10.22 20 23/20x1.5 40.0 40.09612-1505-61 7.65 9612-1505-11 9.60 25 29/26x1.5 50.0 50.09612-1505-62 8.53 9612-1505-12 10.81 32 35/32x1.5 55.0 55.09612-1505-63 8.60 9612-1505-13 10.86 40 41/38x1.5 60.0 60.09612-1505-64 10.51 9612-1505-14 14.38 50 53/50x1.5 70.0 70.09611-30-1066 16.23 9611-30-917-1 20.67 65 70/66x2.0 80.0 80.09611-30-1067 28.01 9611-30-918-1 35.81 80 85/81x2.0 90.0 90.09611-30-1068 36.38 9611-30-919-1 46.78 100 104/100x2.0 100.0 100.09611-30-920-0 81.08 9611-30-920-1 112.79 125 129/125x2.0 187.5 187.59611-30-921-0 102.91 9611-30-921-1 142.41 150 154/150x2.0 225.0 225.0

Bend 90°9611-30-910-0 8.84 9611-30-910-1 10.22 10 12/9x1.5 26.0 26.09611-30-1060 8.84 9611-30-911-1 10.22 15 18/15x1.5 35.0 35.09611-30-1061 8.84 9611-30-913-1 10.22 20 22/19x1.5 40.0 40.09611-30-1062 7.65 9611-30-912-1 9.60 25 28/25x1.5 50.0 50.09611-30-1063 8.53 9611-30-914-1 10.81 32 34/31x1.5 55.0 55.09611-30-1064 8.60 9611-30-915-1 10.86 40 40/37x1.5 60.0 60.09611-30-1065 10.51 9611-30-916-1 14.38 50 52/49x1.5 70.0 70.0




1.2.79

Bends Sanitary, DIN 11850

1.2

Product code: 5007 Finish: OD: MatID: Mat

Material

Item No.

RCPL

EUR

Material

Item No.

RCPL

EUR

Size

DNDimension (mm)

1.4307 (304L) 1.4404 (316L) mm OD/IDxt L R Bend 90°, 2nd series9612-1545-65 10.51 9612-1545-27 16.11 10 13/10x1.5 38.0 26.09612-1545-66 10.51 9612-1545-28 16.11 15 19/16x1.5 47.0 35.09612-1545-67 10.51 9612-1545-29 16.11 20 23/20x1.5 52.0 40.09612-1545-68 7.58 9612-1545-30 11.62 25 29/26x1.5 70.0 50.09612-1545-69 11.18 9612-1545-31 20.64 32 35/32x1.5 78.0 55.09612-1545-70 8.32 9612-1545-32 12.53 40 41/38x1.5 85.0 60.09612-1545-71 10.40 9612-1545-33 15.77 50 53/50x1.5 97.0 70.09611-30-406-1 14.73 9611-30-406-3 22.58 65 70/66x2.0 110.0 80.09611-30-408-1 55.44 9611-30-408-3 60.64 80 85/81x2.0 118.0 90.09611-30-409-1 69.13 9611-30-409-3 75.88 100 104/100x2.0 140.0 100.0

Bend 90°9611-30-412-1 10.51 9611-30-412-3 16.11 10 12/9x1.5 38.0 26.09611-30-413-1 10.51 9611-30-413-3 16.11 15 18/15x1.5 47.0 35.09611-29-392-3 10.51 9611-29-392-4 16.11 20 22/19x1.5 52.0 40.09611-30-414-1 7.58 9611-30-414-3 11.62 25 28/25x1.5 70.0 50.09611-30-415-1 11.18 9611-30-415-3 20.64 32 34/31x1.5 78.0 55.09611-30-416-1 8.32 9611-30-416-3 12.53 40 40/37x1.5 85.0 60.09611-30-417-1 10.40 9611-30-417-3 15.77 50 52/49x1.5 97.0 70.0

Bend 90°, acc. to DIN 11852, 2nd series9612-1505-65 7.85 9612-1505-27 9.30 10 13/10x1.5 26.0 26.09612-1505-66 7.85 9612-1505-28 9.30 15 19/16x1.5 35.0 35.09612-1505-67 7.85 9612-1505-29 9.30 20 23/20x1.5 40.0 40.09612-1505-68 6.86 9612-1505-30 8.66 25 29/26x1.5 50.0 50.09612-1505-69 7.64 9612-1505-31 9.82 32 35/32x1.5 55.0 55.09612-1505-70 7.68 9612-1505-32 9.64 40 41/38x1.5 60.0 60.09612-1505-71 9.47 9612-1505-33 13.05 50 53/50x1.5 70.0 70.09611-30-917-2 14.67 9611-30-917-3 18.60 65 70/66x2.0 80.0 80.09611-30-918-2 25.29 9611-30-918-3 31.76 80 85/81x2.0 90.0 90.09611-30-919-2 33.79 9611-30-919-3 41.58 100 104/100x2.0 100.0 100.0

Bend 90°9611-30-910-2 7.85 9611-30-910-3 9.30 10 132/9x1.5 26.0 26.09611-30-911-2 7.85 9611-30-911-3 9.30 15 18/15x1.5 35.0 35.09611-30-913-2 7.85 9611-30-913-3 9.30 20 22/19x1.5 40.0 40.09611-30-912-2 6.86 9611-30-912-3 8.66 25 28/25x1.5 50.0 50.09611-30-914-2 7.64 9611-30-914-3 9.82 32 34/31x1.5 55.0 55.09611-30-915-2 7.68 9611-30-915-3 9.64 40 40/37x1.5 60.0 60.0.9611-30-916-2 9.47 9611-30-916-3 13.05 50 52/49x1.5 70.0 70.0




1.2.80

Sanitary, DIN 11850 Bends

1.2


Material

Item No.

RCPL

EUR

Material

Item No.

RCPL

EUR

Size

DNDimension (mm)

1.4301 (304) 1.4404 (316L) mm OD/IDxt L RBend 45°,

2nd series OD/ID: Semi bright9612-1546-42 13.74 9612-1546-11 16.75 25 29/26x1.5 34.0 50.09612-1546-43 16.69 9612-1546-12 18.42 32 35/32x1.5 37.0 55.09612-1546-44 19.29 9612-1546-13 21.14 40 41/38x1.5 41.0 60.09612-1546-45 21.14 9612-1546-14 25.41 50 53/50x1.5 48.0 70.09611-29-386-1 16.29 9611-29-386-2 31.19 65 70/66x2.0 55.0 80.09611-29-387-1 28.07 9611-29-387-2 53.13 80 85/81x2.0 62.0 90.09611-29-388-1 40.43 9611-29-388-2 77.39 100 104/100x2.0 69.0 100.09611-29-389-1 136.87 9611-29-389-2 170.94 125 129/125x2.0 131.0 187.59611-29-390-1 169.79 9611-29-390-2 214.25 150 154/150x2.0 157.0 225.0

Bend 45°, acc to DIN 11852, 2nd series. OD/ID: Mat9612-1546-49 12.42 9612-1546-30 15.19 25 289/26x1.5 34.0 50.09612-1546-50 15.13 9612-1546-31 16.69 32 35/32x1.5 37.0 55.09612-1546-51 17.21 9612-1546-32 19.06 40 41/38x1.5 41.0 60.09612-1546-52 19.06 9612-1546-33 22.93 50 53/50x1.5 48.0 70.09611-29-386-3 14.73 9611-29-386-4 27.84 65 70/66x2.0 55.0 80.09611-29-387-3 25.41 9611-29-387-4 46.78 80 85/81x2.0 62.0 90.09611-29-388-3 37.54 9611-29-388-4 70.46 100 104/100x2.0 69.0 100.09611-29-389-3 122.43 9611-29-389-4 154.19 125 129/125x2.0 131.0 187.59611-29-390-3 153.62 9611-29-390-4 194.04 150 154/150x2.0 157.0 225.0

Bend 45°, OD: Semi bright, ID: Raw9611-29-382-1 6.12 9611-29-382-2 11.49 25 28/25x1.5 34.0 50.09611-29-383-1 11.20 9611-29-383-2 15.42 32 34/31x1.5 37.0 55.09611-29-384-1 7.74 9611-29-384-2 13.74 40 40/37x1.5 41.0 60.09611-29-385-1 9.64 9611-29-385-2 18.60 50 52/49x1.5 48.0 70.0

Bend 45°, OD/ID: Mat9611-29-382-3 5.50 9611-29-382-4 10.40 25 28/25x1.5 34.0 50.09611-29-383-3 10.05 9611-29-383-4 13.98 32 34/31x1.5 37.0 55.09611-29-384-3 6.99 9611-29-384-4 12.53 40 40/37x1.5 41.0 60.09611-29-385-3 8.72 9611-29-385-4 16.69 50 52/49x1.5 48.0 70.0



1.2.81

Bends Sanitary, DIN 11850

1.2


Material

Item No.

RCPL

EUR

Material

Item No.

RCPL

EUR

Size

DNDimension (mm)

1.4301 (304) 1.4404 (316L) mm OD/IDxt A B CBend 180°,

OD: Semi bright, ID: Raw9612-1568-01 36.96 9612-1568-25 43.31 10 12/9x1.5 52.09612-1568-02 38.12 9612-1568-26 45.05 15 18/15x1.5 68.09612-1568-03 43.31 9612-1568-27 50.82 20 22/19x1.5 76.09612-1568-04 37.54 9612-1568-28 49.67 25 28/25x1.5 100.09612-1568-05 39.85 9612-1568-29 56.60 32 34/31x1.5 110.09612-1568-06 46.20 9612-1568-30 65.26 40 40/37x1.5 120.09612-1568-07 62.37 9612-1568-31 87.20 50 52/49x1.5 140.09612-1568-08 83.16 9612-1568-32 109.15 65 70/66x2.0 160.09612-1568-09 114.92 9612-1568-33 163.43 80 85/81x2.0 180.09612-1568-10 158.24 9612-1568-34 224.65 100 104/100x2.0 200.0

Bend 180°, OD/ID: Mat9612-1568-13 32.92 9612-1568-37 39.27 10 12/9x1.5 52.09612-1568-14 35.23 9612-1568-38 40.43 15 18/15x1.5 68.09612-1568-15 39.27 9612-1568-39 45.62 20 22/19x1.5 76.09612-1568-16 33.50 9612-1568-40 45.05 25 28/25x1.5 100.09612-1568-17 36.96 9612-1568-41 51.98 32 34/31x1.5 110.09612-1568-18 42.16 9612-1568-42 58.33 40 40/37x1.5 120.09612-1568-19 54.86 9612-1568-43 77.96 50 52/49x1.5 140.09612-1568-20 75.65 9612-1568-44 96.44 65 70/66x2.0 160.09612-1568-21 103.95 9612-1568-45 147.26 80 85/81x2.0 180.09612-1568-22 141.49 9612-1568-46 202.13 100 104/100x2.0 200.0

T-double bend - OD: Semi bright, ID: Raw9612-1542-01 65.26 9612-1542-15 83.16 25 49.0 50.0 25.09612-1542-02 73.92 9612-1542-16 93.56 32 54.0 55.0 31.09612-1542-03 75.08 9612-1542-17 99.91 40 59.0 60.0 37.09612-1542-04 90.09 9612-1542-18 112.61 50 69.0 70.0 49.09612-1542-05 114.35 9612-1542-19 143.80 65 79.0 80.0 66.09612-1542-06 161.12 9612-1542-20 216.56 80 89.0 90.0 81.09612-1542-07 217.72 9612-1542-21 275.47 100 99.0 100.0 100.0

T-double bend - OD/ID: Mat9612-1542-08 58.91 9612-1542-22 75.65 25 49.0 50.0 25.09612-1542-09 66.99 9612-1542-23 84.32 32 54.0 55.0 31.09612-1542-10 67.57 9612-1542-24 90.09 40 59.0 60.0 37.09612-1542-11 81.43 9612-1542-25 101.06 50 69.0 70.0 49.09612-1542-12 102.80 9612-1542-26 130.52 65 79.0 80.0 66.09612-1542-13 145.53 9612-1542-27 196.35 80 89.0 90.0 81.09612-1542-14 197.51 9612-1542-28 247.75 100 99.0 100.0 100.0



1.2.82

Sanitary, DIN 11850 Tees

1.2

Product code: 5026 Finish: OD/ID: Polished

Material

Item No.

RCPL

EUR

Material

Item No.

RCPL

EUR

Size

DNDimension (mm)

1.4307 (304L) 1.4404 (316L) mm OD/ID x t LTee, acc. to DIN 11852,

2nd series9612-1555-58 17.56 9612-1555-08 19.75 10 13/10 x 1.5 26.09612-1555-59 17.56 9612-1555-09 19.75 15 19/16 x 1.5 35.09612-1555-60 17.56 9612-1555-10 19.75 20 23/20 x 1.5 40.09612-1555-61 12.88 9612-1555-11 16.46 25 29/26 x 1.5 50.09612-1555-62 16.29 9612-1555-12 20.67 32 35/32 x 1.5 55.09612-1555-63 16.75 9612-1555-13 20.96 40 41/38 x 1.5 60.09612-1555-64 21.60 9612-1555-14 27.43 50 53/50 x 1.5 70.09611-30-929-0 30.03 9611-30-929-1 38.12 65 70/66 x 2.0 80.09611-30-930-0 37.54 9611-30-930-1 46.20 80 85/81 x 2.0 90.09611-30-931-0 49.67 9611-30-931-1 65.26 100 104/100 x 2.0 100.09611-30-932-0 168.63 9611-30-932-1 211.37 125 129/125 x 2.0 187.59611-30-933-0 260.45 9611-30-933-1 347.66 150 154/150 x 2.0 225.0

Tee, form TS9611-30-922-0 17.56 9611-30-922-1 19.75 10 12/9 x 1.5 26.09611-30-923-0 17.56 9611-30-923-1 19.75 15 18/15 x 1.5 35.09611-30-924-0 17.56 9611-30-924-1 19.75 20 22/19 x 1.5 40.09611-30-925-0 12.88 9611-30-925-1 16.46 25 28/25 x 1.5 50.09611-30-926-0 16.29 9611-30-926-1 20.67 32 34/31 x 1.5 55.09611-30-927-0 16.75 9611-30-927-1 20.96 40 40/37 x 1.5 60.09611-30-928-0 21.60 9611-30-928-1 27.43 50 52/49 x 1.5 70.0

1.4307 (304L) 1.4404 (316L) mm OD/ID x t L1 L2Tee, short,

acc. to DIN 11852, 2nd series9612-9287-01 16.69 9612-9287-11 18.77 15 19/16 x 1.5 35.0 11.09612-9287-02 16.69 9612-9287-12 18.77 20 23/20 x 1.5 40.0 13.09612-9287-03 8.37 9612-9287-13 16.52 25 29/26 x 1.5 50.0 16.59612-9287-04 13.34 9612-9287-14 19.12 32 35/32 x 1.5 55.0 19.09612-9287-05 10.63 9612-9287-15 18.65 40 41/38 x 1.5 60.0 22.59612-9287-06 13.11 9612-9287-16 19.46 50 53/50 x 1.5 70.0 29.59611-30-458-0 19.40 9611-30-458-2 30.03 65 70/66 x 2.0 80.0 40.09611-30-460-0 27.43 9611-30-460-2 43.89 80 85/81 x 2.0 90.0 45.59611-30-462-0 36.38 9611-30-462-2 64.10 100 104/100 x 2.0 100.0 58.59611-30-464-0 144.38 9611-30-464-2 203.28 125 129/125 x 2.0 187.5 71.59612-1500-53 195.20 9612-1500-40 282.98 150 154/150 x 2.0 225.0 87.01.4301 (304) 1.4404 (316L) mm OD/ID x t L1 L2 Tee, short

9612-1500-02 16.69 9612-1500-30 18.77 15 18/15 x 1.5 35.0 10.09612-1500-03 16.69 9612-1500-31 18.77 20 22/19 x 1.5 40.0 12.09612-1500-04 8.37 9612-1500-32 16.52 25 28/25 x 1.5 50.0 15.59612-1500-05 13.34 9612-1500-33 19.12 32 34/31 x 1.5 55.0 18.59612-1500-06 10.63 9612-1500-34 18.65 40 40/37 x 1.5 60.0 21.59612-1500-07 13.11 9612-1500-35 19.46 50 52/49 x 1.5 70.0 29.5




1.2.83

Tees Sanitary, DIN 11850

1.2

Product code: 5026 Finish: OD/ID: Mat

Material

Item No.

RCPL

EUR

Material

Item No.

RCPL

EUR

Size

DNDimension (mm)

1.4307 (304L) 1.4404 (316L) mm OD/ID x t LTee, acc. to DIN 11852,

2nd series9612-1555-65 15.82 9612-1555-27 17.73 10 13/10 x 1.5 26.09612-1555-66 15.82 9612-1555-28 17.73 15 19/16 x 1.5 35.09612-1555-67 15.82 9612-1555-29 17.73 20 23/20 x 1.5 40.09612-1555-68 11.49 9612-1555-30 14.78 25 29/26 x 1.5 50.09612-1555-69 14.73 9612-1555-31 18.60 32 35/32 x 1.5 55.09612-1555-70 15.19 9612-1555-32 19.00 40 41/38 x 1.5 60.09612-1555-71 19.58 9612-1555-33 24.72 50 53/50 x 1.5 70.09611-30-929-2 26.91 9611-30-929-3 34.07 65 70/66 x 2.0 80.09611-30-930-2 33.50 9611-30-930-3 42.16 80 85/81 x 2.0 90.09611-30-931-2 45.05 9611-30-931-3 58.91 100 104/100 x 2.0 100.09611-30-932-2 152.46 9611-30-932-3 190.58 125 129/125 x 2.0 187.59611-30-933-2 233.89 9611-30-933-3 312.43 150 154/150 x 2.0 225.0

Tee, form TS9611-30-922-2 15.82 9611-30-922-3 17.73 10 12/9 x 1.5 26.09611-30-923-2 15.82 9611-30-923-3 17.73 15 18/15 x 1.5 35.09611-30-924-2 15.82 9611-30-924-3 17.73 20 22/19 x 1.5 40.09611-30-925-2 11.49 9611-30-925-3 14.78 25 28/25 x 1.5 50.09611-30-926-2 14.73 9611-30-926-3 18.60 32 34/31 x 1.5 55.09611-30-927-2 15.19 9611-30-927-3 19.00 40 40/37 x 1.5 60.09611-30-928-2 19.58 9611-30-928-3 24.72 50 52/49 x 1.5 70.0

1.4307 (304L) 1.4404 (316L) mm OD/ID x t L1 L2Tee, short,

acc. to DIN 11852, 2nd series9612-9287-21 15.13 9612-9287-31 16.86 15 19/16 x 1.5 35.0 11.09612-9287-22 15.13 9612-9287-32 16.86 20 23/20 x 1.5 40.0 13.09612-9287-23 7.51 9612-9287-33 14.84 25 29/26 x 1.5 50.0 16.59612-9287-24 12.01 9612-9287-34 17.09 32 35/32 x 1.5 55.0 19.09612-9287-25 9.59 9612-9287-35 16.75 40 41/38 x 1.5 60.0 22.59612-9287-26 11.84 9612-9287-36 17.56 50 53/50 x 1.5 70.0 29.59611-30-458-1 17.50 9611-30-458-3 26.91 65 70/66 x 2.0 80.0 40.09611-30-460-1 24.72 9611-30-460-3 38.69 80 85/81 x 2.0 90.0 45.59611-30-462-1 32.34 9611-30-462-3 56.60 100 104/100 x 2.0 100.0 58.59611-30-464-1 131.09 9611-30-464-3 183.07 125 129/125 x 2.0 187.5 71.59612-1500-54 176.14 9612-1500-52 254.10 150 154/150 x 2.0 225.0 87.01.4301 (304) 1.4404 (316L) mm OD/ID x t L1 L2 Tee, short

9612-1500-09 15.13 9612-1500-42 16.86 15 18/15 x 1.5 35.0 10.09612-1500-10 15.13 9612-1500-43 16.86 20 22/19 x 1.5 40.0 12.09612-1500-11 7.51 9612-1500-44 14.84 25 28/25 x 1.5 50.0 15.59612-1500-12 12.01 9612-1500-45 17.09 32 34/31 x 1.5 55.0 18.59612-1500-13 9.59 9612-1500-46 16.75 40 40/37 x 1.5 60.0 21.59612-1500-14 11.84 9612-1500-47 17.56 50 52/49 x 1.5 70.0 29.5



1.2.84

Sanitary, DIN 11850 Tees

1.2

* Please note that reduced tees are not within the DIN standardProduct code: 5026

Finish: See below

Material

Item No.

RCPL

EUR

Material

Item No.

RCPL

EUR

Size

DNDimension (mm) Finish: OD/ID: Polished

1.4307 (304L) 1.4404 (316L) mm OD1/ID1 x t1 OD2/ID2 x t2 L1 L2 Reduced tee, short*9612-1556-01 17.90 9612-1556-17 22.75 32/25 34/31 x 1.5 28/25 x 1.5 55.0 20.59612-1556-02 20.10 9612-1556-18 31.19 40/25 40/37 x 1.5 28/25 x 1.5 60.0 23.59612-1556-03 17.61 9612-1556-19 36.38 40/32 40/37 x 1.5 34/31 x 1.5 60.0 23.09612-1556-04 24.14 9612-1556-20 36.38 50/32 52/49 x 1.5 34/31 x 1.5 70.0 29.09612-1556-05 20.39 9612-1556-21 39.27 50/40 52/49 x 1.5 40/37 x 1.5 70.0 29.09611-30-457-0 32.34 9611-30-457-2 46.78 65/50 70/66 x 2.0 52/49 x 1.5 80.0 39.09612-1556-06 45.05 9612-1556-23 65.84 80/50 85/81 x 2.0 52/49 x 1.5 90.0 47.09611-30-459-0 45.62 9611-30-459-2 65.26 80/65 85/81 x 2.0 70/66 x 2.0 90.0 47.09612-1556-07 56.02 9612-1556-25 84.32 100/50 104/100 x 2.0 52/49 x 1.5 100.0 58.09612-1556-08 58.91 9612-1556-26 66.99 100/65 104/100 x 2.0 70/66 x 2.0 100.0 58.09611-30-461-0 58.91 9611-30-461-2 95.87 100/80 104/100 x 2.0 85/81 x 2.0 100.0 59.0

Reduced tee*9612-1574-01 26.91 9612-1574-34 30.03 32/25 34/31 x 1.5 28/25 x 1.5 55.09612-1574-02 17.67 9612-1574-35 31.76 40/25 40/37 x 1.5 28/25 x 1.5 60.09612-1574-03 23.74 9612-1574-36 35.23 40/32 40/37 x 1.5 34/31 x 1.5 60.09612-1574-04 26.10 9612-1574-37 38.69 50/32 52/49 x 1.5 34/31 x 1.5 70.09612-1574-05 22.41 9612-1574-38 42.16 50/40 52/49 x 1.5 40/37 x 1.5 70.09612-1574-06 30.61 9612-1574-39 60.64 65/50 70/66 x 2.0 52/49 x 1.5 80.09612-1574-07 37.54 9612-1574-40 73.34 80/50 85/81 x 2.0 52/49 x 1.5 90.09612-1574-08 60.64 9612-1574-41 81.43 80/65 85/81 x 2.0 70/66 x 2.0 90.09612-1574-09 55.44 9612-1574-42 95.29 100/50 104/100 x 2.0 52/49 x 1.5 100.09612-1574-10 64.68 9612-1574-43 114.92 100/65 104/100 x 2.0 70/66 x 2.0 100.09612-1574-11 73.92 9612-1574-44 92.98 100/80 104/100 x 2.0 85/81 x 2.0 100.0

Material

Item No.

RCPL

EUR

Material

Item No.

RCPL

EUR

Size

DNDimension (mm) Finish: OD/ID: Mat

1.4307 (304L) 1.4404 (316L) mm OD1/ID1 x t1 OD2/ID2 x t2 L1 L2 Reduced tee, short*9612-1556-09 16.11 9612-1556-28 20.39 32/25 34/31 x 1.5 28/25 x 1.5 55.0 20.59612-1556-10 18.13 9612-1556-29 27.84 40/25 40/37 x 1.5 28/25 x 1.5 60.0 23.59612-1556-11 15.88 9612-1556-30 32.92 40/32 40/37 x 1.5 34/31 x 1.5 60.0 23.09612-1556-12 21.66 9612-1556-31 32.92 50/32 52/49 x 1.5 34/31 x 1.5 70.0 29.09612-1556-13 18.42 9612-1556-32 36.38 50/40 52/49 x 1.5 40/37 x 1.5 70.0 29.09611-30-457-1 28.88 9611-30-457-3 43.31 65/50 70/66 x 2.0 52/49 x 1.5 80.0 39.09612-1556-14 39.85 9612-1556-34 60.64 80/50 85/81 x 2.0 52/49 x 1.5 90.0 47.09611-30-459-1 40.43 9611-30-459-3 58.91 80/65 85/81 x 2.0 70/66 x 2.0 90.0 47.09612-1556-15 50.82 9612-1556-36 75.65 100/50 104/100 x 2.0 52/49 x 1.5 100.0 58.09612-1556-16 53.13 9612-1556-37 61.22 100/65 104/100 x 2.0 70/66 x 2.0 100.0 58.09611-30-461-1 53.13 9611-30-461-3 86.63 100/80 104/100 x 2.0 85/81 x 2.0 100.0 59.0

Reduced tee*9612-1574-12 23.74 9612-1574-23 27.14 32/25 34/31 x 1.5 28/25 x 1.5 55.09612-1574-13 15.94 9612-1574-24 28.53 40/25 40/37 x 1.5 28/25 x 1.5 60.09612-1574-14 21.43 9612-1574-25 31.19 40/32 40/37 x 1.5 34/31 x 1.5 60.09612-1574-15 23.45 9612-1574-26 35.81 50/32 52/49 x 1.5 34/31 x 1.5 70.09612-1574-16 20.10 9612-1574-27 38.12 50/40 52/49 x 1.5 40/37 x 1.5 70.09612-1574-17 27.43 9612-1574-28 54.29 65/50 70/66 x 2.0 52/49 x 1.5 80.09612-1574-18 33.50 9612-1574-29 65.84 80/50 85/81 x 2.0 52/49 x 1.5 90.09612-1574-19 54.29 9612-1574-30 73.34 80/65 85/81 x 2.0 70/66 x 2.0 90.09612-1574-20 49.67 9612-1574-31 86.05 100/50 104/100 x 2.0 52/49 x 1.5 100.09612-1574-21 57.17 9612-1574-32 103.95 100/65 104/100 x 2.0 70/66 x 2.0 100.09612-1574-22 66.99 9612-1574-33 82.58 100/80 104/100 x 2.0 85/81 x 2.0 100.0


1.2.85

Tees Sanitary, DIN 11850

1.2

* Please note that reduced tees are not within the DIN standardProduct code: 5026

Finish: See below


1.2.86

Sanitary, DIN 11850 DIN Union Parts

1.2

Product code: 5044 Finish: Semi brightSeals: Nitrile

Thread: Round type

Material

Item No.

RCPL

EUR

Material

Item No.

RCPL

EUR

Size

DNDimension (mm)

1.4307 (304L) 1.4404 (316L) mm OD/ID x t A B Union, Acc. to DIN 11851, 2nd series9611-30-579-0 13.05 9611-30-579-1 21.73 10 13/10 x 1.5 38.0 25.09611-30-580-0 20.81 9611-30-580-1 23.47 15 19/16 x 1.5 44.0 25.09611-29-001-1 19.35 9611-29-001-2 31.31 20 23/20 x 1.5 54.0 25.09611-30-1119 20.24 9611-33-1119 24.16 25 29/26 x 1.5 63.0 31.09611-30-1120 21.82 9611-33-1120 27.32 32 35/32 x 1.5 70.0 31.09611-30-1121 23.85 9611-33-1121 28.27 40 41/38 x 1.5 78.0 31.09611-30-1122 28.02 9611-33-1122 32.89 50 53/50 x 1.5 92.0 33.09611-30-1123 39.22 9611-33-1123 46.81 65 70/66 x 2.0 112.0 35.09611-30-1124 65.15 9611-33-1124 91.47 80 85/81 x 2.0 127.0 35.09611-30-1126 96.70 9611-33-1126 116.43 100 104/100 x 2.0 148.0 41.01.4301 (304) 1.4404 (316L) mm A B C D Nut, acc. to DIN 11851

9611-30-642-0 5.13 9612-1507-01 7.83 10 38.0 18.0 28 x 1/8 14.09611-30-643-0 8.92 9612-1507-02 14.04 15 44.0 18.0 34 x 1/8 25.09611-29-002-1 6.26 9612-1507-03 9.77 20 54.0 20.0 44 x 1/6 31.031318-0014-1 8.03 9612-1507-04 15.37 25 63.0 21.0 52 x 1/6 36.031318-0014-2 8.54 9612-1507-05 14.17 32 70.0 21.0 58 x 1/6 42.031318-0014-3 9.17 9612-1507-06 15.37 40 78.0 21.0 65 x 1/6 49.031318-0014-4 10.69 9612-1507-07 17.39 50 92.0 22.0 78 x 1/6 62.031318-0014-5 16.76 9612-1507-08 26.82 65 112.0 25.0 95 x 1/6 80.031318-0014-6 26.25 9612-1507-10 41.75 80 127.0 29.0 110 x 1/4 94.031318-0014-8 36.18 9612-1507-11 59.20 100 148.0 31.0 130 x 1/4 115.0

1.4307 (304L) 1.4404 (316L) mm OD/ID x t B CMale part, Acc. to DIN

11851, 2nd series9611-30-590-0 5.31 9611-30-590-1 11.10 10 13/10 x 1.5 17.0 28 x 1/8

9611-30-591-0 7.84 9611-30-591-1 9.42 15 19/16 x 1.5 17.0 34 x 1/8

9611-29-003-1 8.30 9611-29-003-2 15.65 20 23/20 x 1.5 19.0 44 x 1/6

9611-30-1087 6.96 9611-33-1087 9.42 25 29/26 x 1.5 22.0 52 x 1/6

9611-30-1088 7.46 9611-33-1088 10.12 32 35/32 x 1.5 22.0 58 x 1/6

9611-30-1089 8.35 9611-33-1089 10.69 40 41/38 x 1.5 22.0 65 x 1/6

9611-30-1090 9.68 9611-33-1090 12.52 50 53/50 x 1.5 23.0 78 x 1/6

9611-30-1091 13.09 9611-33-1091 17.08 65 70/66 x 2.0 25.0 95 x 1/6

9611-30-1092 22.14 9611-33-1092 28.53 80 85/81 x 2.0 25.0 110 x 1/4

9611-30-1094 32.69 9611-33-1094 43.42 100 104/100 x 2.0 30.0 130 x 1/4

1.4307 (304L) 1.4404 (316L) mm OD/ID x t A BLiner

Acc. to DIN 11851, 2nd series9611-30-595-0 2.29 9611-30-595-1 5.17 10 13/10 x 1.5 22.0 13.09611-30-596-0 3.55 9611-30-596-1 4.80 15 19/16 x 1.5 28.0 13.09611-29-004-1 4.50 9611-29-004-2 9.30 20 23/20 x 1.5 36.0 13.09611-30-1095 4.80 9611-33-1095 6.33 25 29/26 x 1.5 44.0 15.09611-30-1096 5.43 9611-33-1096 8.41 32 35/32 x 1.5 50.0 15.09611-30-1097 5.94 9611-33-1097 7.91 40 41/38 x 1.5 56.0 15.09611-30-1098 7.08 9611-33-1098 9.23 50 53/50 x 1.5 68.0 16.09611-30-1099 8.98 9611-33-1099 11.89 65 70/66 x 2.0 86.0 17.09611-30-1100 15.43 9611-33-1100 20.18 80 85/81 x 2.0 100.0 17.09611-30-1102 26.97 9611-33-1102 35.52 100 104/100 x 2.0 121.0 20.0





1.2.87

DIN Union Parts Sanitary, DIN 11850

1.2

Product code: 5044 Finish: MatSeals: Nitrile

Thread: Round type

Material

Item No.

RCPL

EUR

Material

Item No.

RCPL

EUR

Size

DNDimension (mm)

1.4307 (304L) 1.4404 (316L) mm OD/ID x t A BUnion, Acc. to DIN 11851,

2nd series9611-30-579-2 14.37 9611-30-579-3 22.09 10 13/10 x 1.5 38.0 25.09611-30-580-2 22.77 9611-30-580-3 25.81 15 19/16 x 1.5 44.0 25.09611-29-001-3 21.35 9611-29-001-4 34.63 20 23/20 x 1.5 54.0 25.09611-30-674-2 22.26 9611-30-674-3 26.63 25 29/26 x 1.5 63.0 31.09611-30-675-2 24.04 9611-30-675-3 30.17 32 35/32 x 1.5 70.0 31.09611-30-676-2 26.25 9611-30-676-3 31.25 40 41/38 x 1.5 78.0 31.09611-30-677-2 30.74 9611-30-677-3 36.05 50 53/50 x 1.5 92.0 33.09611-30-678-2 42.38 9611-30-678-3 49.97 65 70/66 x 2.0 112.0 35.09611-30-679-2 71.47 9611-30-679-3 83.49 80 85/81 x 2.0 127.0 35.09611-30-680-2 107.88 9611-30-680-3 127.61 100 104/100 x 2.0 148.0 41.01.4301 (304) 1.4404 (316L) mm A B C D Nut, acc. to DIN 11851

9611-30-642-1 7.53 9612-1507-14 10.51 10 38.0 18.0 28 x 1/8 14.09611-30-643-1 9.80 9612-1507-15 15.37 15 44.0 18.0 34 x 1/8 25.09611-29-002-2 6.88 9612-1507-16 12.67 20 54.0 20.0 44 x 1/6 31.09611-30-709-1 8.92 9612-1507-17 16.89 25 63.0 21.0 52 x 1/6 36.09611-30-710-1 9.49 9612-1507-18 15.50 32 70.0 21.0 58 x 1/6 42.09611-30-711-1 10.18 9612-1507-19 16.89 40 78.0 21.0 65 x 1/6 49.09611-30-712-1 11.95 9612-1507-20 19.16 50 92.0 22.0 78 x 1/6 62.09611-30-713-1 18.34 9612-1507-21 29.47 65 112.0 25.0 95 x 1/6 80.09611-30-714-1 28.91 9612-1507-23 44.28 80 127.0 29.0 110 x 1/4 94.09611-30-715-1 40.78 9612-1507-24 64.47 100 148.0 31.0 130 x 1/4 115.0

1.4307 (304L) 1.4404 (316L) mm OD/ID x t B CMale part, Acc. to DIN

11851, 2nd series9611-30-590-2 5.84 9611-30-590-3 12.29 10 13/10 x 1.5 17.0 28 x 1/8

9611-30-591-2 8.60 9611-30-591-3 10.37 15 19/16 x 1.5 17.0 34 x 1/8

9611-29-003-3 9.20 9611-29-003-4 17.17 20 23/20 x 1.5 19.0 44 x 1/6

9611-30-681-2 7.65 9611-30-681-3 10.37 25 29/26 x 1.5 22.0 52 x 1/6

9611-30-682-2 8.22 9611-30-682-3 11.07 32 35/32 x 1.5 22.0 58 x 1/6

9611-30-683-2 9.17 9611-30-683-3 11.95 40 41/38 x 1.5 22.0 65 x 1/6

9611-30-684-2 10.56 9611-30-684-3 13.73 50 53/50 x 1.5 23.0 78 x 1/6

9611-30-685-2 14.42 9611-30-685-3 18.66 65 70/66 x 2.0 25.0 95 x 1/6

9611-30-686-2 24.41 9611-30-686-3 31.37 80 85/81 x 2.0 25.0 110 x 1/4

9611-30-687-2 36.18 9611-30-687-3 46.05 100 104/100 x 2.0 30.0 130 x 1/4

1.4307 (304L) 1.4404 (316L) mm OD/ID x t A BLiner Acc. to DIN 11851,

2nd series9611-30-595-2 2.52 9611-30-595-3 6.93 10 13/10 x 1.5 22.0 13.09611-30-596-2 3.90 9611-30-596-3 5.28 15 19/16 x 1.5 28.0 13.09611-29-004-3 4.98 9611-29-004-4 10.20 20 23/20 x 1.5 36.0 13.09611-30-688-2 5.28 9611-30-688-3 6.96 25 29/26 x 1.5 44.0 15.09611-30-689-2 5.98 9611-30-689-3 9.30 32 35/32 x 1.5 50.0 15.09611-30-690-2 6.51 9611-30-690-3 8.79 40 41/38 x 1.5 56.0 15.09611-30-691-2 7.72 9611-30-691-3 10.25 50 53/50 x 1.5 68.0 16.09611-30-692-2 9.93 9611-30-692-3 13.03 65 70/66 x 2.0 86.0 17.09611-30-693-2 17.08 9611-30-693-3 22.14 80 85/81 x 2.0 100.0 17.09611-30-694-2 29.80 9611-30-694-3 38.81 100 104/100 x 2.0 121.0 20.0




1.2.88


1.2

Product code: 5044 Finish: Semi brightThread: Round type

Material

Item No.

RCPL

EUR

Material

Item No.

RCPL

EUR

Size

DNDimension (mm)

1.4307 (304L) 1.4404 (316L) mm OD/ID x t A BUnion, long. NBR seal. Acc.

to DIN 11851, 2nd seal9612-1513-01 15.13 9612-1514-01 19.97 10 13/10 x 1.5 38.0 34.09612-1513-02 20.87 9612-1514-02 24.48 15 19/16 x 1.5 44.0 34.09612-1513-03 16.65 9612-1514-03 19.88 20 23/20 x 1.5 54.0 36.09612-1513-04 21.57 9612-1514-04 24.22 25 29/26 x 1.5 63.0 45.09612-1513-05 23.85 9612-1514-05 27.01 32 35/32 x 1.5 70.0 51.09612-1513-06 25.62 9612-1514-06 29.60 40 41/38 x 1.5 78.0 53.09612-1513-07 30.04 9612-1514-07 36.05 50 53/50 x 1.5 92.0 57.09612-1513-08 46.17 9612-1514-08 52.50 65 70/66 x 2.0 112.0 65.09612-1513-09 70.84 9612-1514-09 79.06 80 85/81 x 2.0 127.0 75.09612-1513-10 106.56 9612-1514-10 112.48 100 104/100 x 2.0 148.0 89.09612-1513-11 193.55 9612-1514-11 242.25 125 129/125 x 2.0 178.0 70.09612-1513-12 326.18 9612-1514-12 387.09 150 154/150 x 2.0 210.0 76.0

Union, long. EPDM seal. Acc. to DIN 11851, 2nd series9612-1513-37 15.13 9612-1514-37 19.97 10 13/10 x 1.5 38.0 34.09612-1513-38 20.87 9612-1514-38 24.48 15 19/16 x 1.5 44.0 34.09612-1513-39 16.65 9612-1514-39 19.88 20 23/20 x 1.5 54.0 36.09612-1513-40 21.57 9612-1514-40 24.22 25 29/26 x 1.5 63.0 45.09612-1513-41 23.85 9612-1514-41 27.01 32 35/32 x 1.5 70.0 51.09612-1513-42 25.62 9612-1514-42 29.60 40 41/38 x 1.5 78.0 53.09612-1513-43 30.42 9612-1514-43 36.05 50 53/50 x 1.5 92.0 57.09612-1513-44 46.81 9612-1514-44 52.50 65 70/66 x 2.0 112.0 65.09612-1513-45 71.47 9612-1514-45 80.33 80 85/81 x 2.0 127.0 75.09612-1513-46 107.22 9612-1514-46 113.14 100 104/100 x 2.0 148.0 89.09612-1513-47 194.18 9612-1514-47 242.88 125 129/125 x 2.0 178.0 70.09612-1513-48 326.75 9612-1514-48 387.66 150 154/150 x 2.0 210.0 76.0




1.2.89


1.2


Material

Item No.

RCPL

EUR

Material

Item No.

RCPL

EUR

Size

DNDimension (mm)

1.4301 (304) 1.4404 (316L) mm A B C D Nut, acc. to DIN 118519611-30-642-0 5.13 9612-1507-01 7.83 10 38.0 18.0 28 x 1/8 14.09611-30-643-0 8.92 9612-1507-02 14.04 15 44.0 18.0 34 x 1/8 25.09611-29-002-1 6.26 9612-1507-03 9.77 20 54.0 20.0 44 x 1/6 31.031318-0014-1 8.03 9612-1507-04 15.37 25 63.0 21.0 52 x 1/6 36.031318-0014-2 8.54 9612-1507-05 14.17 32 70.0 21.0 58 x 1/6 42.031318-0014-3 9.17 9612-1507-06 15.37 40 78.0 21.0 65 x 1/6 49.031318-0014-4 10.69 9612-1507-07 17.39 50 92.0 22.0 78 x 1/6 62.031318-0014-5 16.76 9612-1507-08 26.82 65 112.0 25.0 95 x 1/6 80.031318-0014-6 26.25 9612-1507-10 41.75 80 127.0 29.0 110 x 1/4 94.031318-0014-8 36.18 9612-1507-11 59.20 100 148.0 31.0 130 x 1/4 115.09611-30-645-0 67.05 9612-1507-12 219.48 125 178.0 34.0 160 x 1/4 138.09611-30-646-0 120.77 On request 150 210.0 40.0 190 x 1/4 164.0

1.4307 (304L) 1.4404 (316L) mm OD/ID x t B CMale part, long. Acc. to DIN

11851, 2nd series9611-30-610-0 7.50 9611-30-610-1 9.06 10 13/10 x 1.5 21.0 28 x 1/8

9611-30-611-0 7.40 9611-30-611-1 9.23 15 19/16 x 1.5 21.0 34 x 1/8

9611-29-008-1 6.40 9611-29-008-2 8.40 20 23/20 x 1.5 24.0 44 x 1/6

9611-30-1103 7.78 9611-33-1103 9.49 25 29/26 x 1.5 29.0 52 x 1/6

9611-30-1104 9.11 9611-33-1104 10.37 32 35/32 x 1.5 32.0 58 x 1/6

9611-30-1105 9.55 9611-33-1105 11.64 40 41/38 x 1.5 33.0 65 x 1/6

9611-30-1106 11.01 9611-33-1106 14.55 50 53/50 x 1.5 35.0 78 x 1/6

9611-30-1107 16.63 9611-33-1107 20.05 65 70/66 x 2.0 40.0 95 x 1/6

9611-30-1108 25.68 9611-33-1108 30.80 80 85/81 x 2.0 45.0 110 x 1/4

9611-30-1110 38.81 9611-33-1110 40.13 100 104/100 x 2.0 54.0 130 x 1/4

9611-30-613-0 69.58 9611-30-613-1 103.73 125 129/125 x 2.0 46.0 160 x 1/4

9611-30-614-0 112.96 9611-30-614-1 144.81 150 154/150 x 2.0 50.0 190 x 1/4

1.4307 (304L) 1.4404 (316L) mm OD/ID x t A BLiner, long. Acc. to DIN

11851, 2nd series9611-30-615-0 2.23 9611-30-615-1 5.51 10 13/10 x 1.5 22.0 17.09611-30-616-0 4.13 9611-30-616-1 5.91 15 19/16 x 1.5 28.0 17.09611-29-009-1 3.67 9611-29-009-2 4.93 20 23/20 x 1.5 36.0 18.09611-30-1111 5.28 9611-33-1111 6.33 25 29/26 x 1.5 44.0 22.09611-30-1112 5.79 9611-33-1112 7.72 32 35/32 x 1.5 50.0 25.09611-30-1113 6.58 9611-33-1113 8.41 40 41/38 x 1.5 56.0 26.09611-30-1114 7.78 9611-33-1114 10.18 50 53/50 x 1.5 68.0 28.09611-30-1115 11.89 9611-33-1115 14.74 65 70/66 x 2.0 86.0 32.09611-30-1116 18.22 9611-33-1116 21.82 80 85/81 x 2.0 100.0 37.09611-30-1118 29.67 9611-33-1118 34.86 100 104/100 x 2.0 121.0 44.09611-30-618-0 55.66 9611-30-618-1 70.21 125 129/125 x 2.0 150.0 34.09611-30-619-0 108.16 9611-30-619-1 139.40 150 154/150 x 2.0 176.0 37.0





1.2.90


1.2

Product code: 5044 Finish: MatThread: Round type

Material

Item No.

RCPL

EUR

Material

Item No.

RCPL

EUR

Size

DNDimension (mm)

1.4307 (304L)

- NBR

1.4404 (316L)

- NBRmm OD/ID x t A B

Union, long. Acc. to DIN

11851, 2nd series9612-1513-13 16.60 9612-1514-13 21.87 10 13/10 x 1.5 38.0 34.09612-1513-14 22.83 9612-1514-14 26.88 15 19/16 x 1.5 44.0 34.09612-1513-15 18.31 9612-1514-15 21.87 20 23/20 x 1.5 54.0 36.09612-1513-16 23.66 9612-1514-16 26.69 25 29/26 x 1.5 63.0 45.09612-1513-17 26.25 9612-1514-17 29.73 32 35/32 x 1.5 70.0 51.09612-1513-18 28.34 9612-1514-18 32.26 40 41/38 x 1.5 78.0 53.09612-1513-19 32.89 9612-1514-19 39.85 50 53/50 x 1.5 92.0 57.09612-1513-20 49.97 9612-1514-20 56.93 65 70/66 x 2.0 112.0 65.09612-1513-21 77.80 9612-1514-21 87.92 80 85/81 x 2.0 127.0 75.09612-1513-22 117.75 9612-1514-22 123.67 100 104/100 x 2.0 148.0 89.09612-1513-23 212.52 9612-1514-23 266.92 125 129/125 x 2.0 178.0 70.09612-1513-24 426.94 9612-1514-24 426.94 150 154/150 x 2.0 210.0 76.01.4307 (304L)

- EPDM

1.4404 (316L)

- EPDMmm OD/ID x t A B

Union, long. Acc. to DIN

11851, 2nd series9612-1513-25 16.60 9612-1514-25 21.87 10 13/10 x 1.5 38.0 34.09612-1513-26 22.83 9612-1514-26 26.88 15 19/16 x 1.5 44.0 34.09612-1513-27 18.31 9612-1514-27 21.87 20 23/20 x 1.5 54.0 36.09612-1513-28 23.66 9612-1514-28 26.69 25 29/26 x 1.5 63.0 45.09612-1513-29 26.25 9612-1514-29 29.73 32 35/32 x 1.5 70.0 51.09612-1513-30 28.34 9612-1514-30 32.26 40 41/38 x 1.5 78.0 53.09612-1513-31 33.52 9612-1514-31 39.85 50 53/50 x 1.5 92.0 57.09612-1513-32 49.97 9612-1514-32 57.56 65 70/66 x 2.0 112.0 65.09612-1513-33 77.80 9612-1514-33 87.92 80 85/81 x 2.0 127.0 75.09612-1513-34 117.75 9612-1514-34 124.32 100 104/100 x 2.0 148.0 89.09612-1513-35 268.18 9612-1514-35 268.18 125 129/125 x 2.0 178.0 70.09612-1513-36 360.34 9612-1514-36 389.81 150 154/150 x 2.0 210.0 76.0




1.2.91


1.2

Product code: 5044 Finish: MatThread: Round type

Material

Item No.

RCPL

EUR

Material

Item No.

RCPL

EUR

Size

DNDimension (mm)

1.4301 (304) 1.4404 (316L) mm A B C D Nut, acc. to DIN 118519611-30-642-1 7.53 9612-1507-14 10.51 10 38.0 18.0 28 x 1/8 19.09611-30-643-1 9.80 9612-1507-15 15.37 15 44.0 18.0 34 x 1/8 25.09611-29-002-2 6.88 9612-1507-16 12.67 20 54.0 20.0 44 x 1/6 31.09611-30-709-1 8.92 9612-1507-17 16.89 25 63.0 21.0 52 x 1/6 36.09611-30-710-1 9.49 9612-1507-18 15.50 32 70.0 21.0 58 x 1/6 42.09611-30-711-1 10.18 9612-1507-19 16.89 40 78.0 21.0 65 x 1/6 49.09611-30-712-1 11.95 9612-1507-20 19.16 50 92.0 22.0 78 x 1/6 62.09611-30-713-1 18.34 9612-1507-21 29.47 65 112.0 25.0 95 x 1/6 80.09611-30-714-1 28.91 9612-1507-23 44.28 80 127.0 29.0 110 x 1/4 94.09611-30-715-1 40.78 9612-1507-24 64.47 100 148.0 31.0 130 x 1/4 115.09611-30-645-1 73.37 On request 125 178.0 34.0 160 x 1/4 138.09611-30-646-1 134.60 On request 150 210.0 40.0 190 x 1/4 164.0

1.4307 (304L) 1.4404 (316L) mm OD/ID x t B CMale part, long. Acc. to DIN

11851, 2nd series9611-30-610-2 8.21 9611-30-610-3 9.92 10 13/10 x 1.5 21.0 28 x 1/8

9611-30-611-2 8.03 9611-30-611-3 10.25 15 19/16 x 1.5 21.0 34 x 1/8

9611-29-008-3 7.12 9611-29-008-4 9.30 20 23/20 x 1.5 24.0 44 x 1/6

9611-30-695-2 8.54 9611-30-695-3 10.44 25 29/26 x 1.5 29.0 52 x 1/6

9611-30-696-2 9.99 9611-30-696-3 11.39 32 35/32 x 1.5 32.0 58 x 1/6

9611-30-697-2 10.50 9611-30-697-3 12.78 40 41/38 x 1.5 33.0 65 x 1/6

9611-30-698-2 12.21 9611-30-698-3 16.07 50 53/50 x 1.5 35.0 78 x 1/6

9611-30-699-2 18.22 9611-30-699-3 22.01 65 70/66 x 2.0 40.0 95 x 1/6

9611-30-700-2 28.40 9611-30-700-3 34.16 80 85/81 x 2.0 45.0 110 x 1/4

9611-30-701-2 43.42 9611-30-701-3 43.42 100 104/100 x 2.0 54.0 130 x 1/4

9611-30-613-2 75.90 9611-30-613-3 113.85 125 129/125 x 2.0 46.0 160 x 1/4

9611-30-614-2 123.78 9611-30-614-3 159.84 150 154/150 x 2.0 50.0 190 x 1/4

1.4307 (304L) 1.4404 (316L) mm OD/ID x t A BLiner, long. Acc. to DIN

11851, 2nd series9611-30-615-2 2.45 9611-30-615-3 6.02 10 13/10 x 1.5 22.0 17.09611-30-616-2 4.54 9611-30-616-3 6.51 15 19/16 x 1.5 28.0 17.09611-29-009-3 4.03 9611-29-009-4 5.41 20 23/20 x 1.5 36.0 18.09611-30-702-2 5.81 9611-30-702-3 6.96 25 29/26 x 1.5 44.0 22.09611-30-703-2 6.39 9611-30-703-3 8.48 32 35/32 x 1.5 50.0 25.09611-30-704-2 7.21 9611-30-704-3 9.30 40 41/38 x 1.5 56.0 26.09611-30-705-2 8.54 9611-30-705-3 11.13 50 53/50 x 1.5 68.0 28.09611-30-706-2 13.03 9611-30-706-3 16.26 65 70/66 x 2.0 86.0 32.09611-30-707-2 20.05 9611-30-707-3 24.04 80 85/81 x 2.0 100.0 37.09611-30-708-2 32.63 9611-30-708-3 38.15 100 104/100 x 2.0 121.0 44.09611-30-618-2 60.72 9611-30-618-3 77.17 125 129/125 x 2.0 150.0 34.09611-30-619-2 118.98 9611-30-619-3 153.82 150 154/150 x 2.0 176.0 37.0




1.2.92


1.2

Product code: 5044 Finish: See belowSeals: Nitrile


Material

Item No.

RCPL

EUR

Material

Item No.

RCPL

EUR

Size

DNDimension (mm) Finish: Semi bright

1.4301 (304) 1.4404 (316L) mm A B C D Male part31318-0039-1 7.65 9611-30-660-2 16.76 25 29.0 52 x 1/6 28.231318-0039-2 13.16 9611-30-661-2 23.47 32 32.0 58 x 1/6 34.231318-0039-3 9.42 9611-30-662-2 20.56 40 33.0 65 x 1/6 40.231318-0039-4 10.69 9611-30-663-2 14.36 50 35.0 78 x 1/6 52.231318-0039-5 16.19 9611-30-664-2 40.48 65 40.0 95 x 1/6 70.331318-0039-6 25.24 9611-30-665-2 60.09 80 45.0 110 x 1/4 85.331318-0039-8 38.15 9611-30-666-2 100.64 100 54.0 130 x 1/4 104.3

Liner31318-0015-1 5.17 9611-30-667-2 7.46 25 44.0 22.0 28.231318-0015-2 8.41 9611-30-668-2 16.89 32 50.0 25.0 34.231318-0015-3 6.45 9611-30-669-2 17.39 40 56.0 26.0 40.231318-0015-4 7.65 9611-30-670-2 16.76 50 68.0 28.0 52.231318-0015-5 11.51 9611-30-671-2 29.10 65 86.0 32.0 70.331318-0015-6 17.84 9611-30-672-2 25.62 80 100.0 37.0 85.331318-0015-8 29.01 9611-30-673-2 71.04 100 121.0 44.0 104.3

Material

Item No.

RCPL

EUR

Material

Item No.

RCPL

EUR

Size

DNDimension (mm) Finish: Mat

1.4301 (304) 1.4404 (316L) mm A B C D Male part9611-30-660-1 8.41 9611-30-660-3 16.75 25 29.0 52 x 1/6 28.29611-30-661-1 14.48 9611-30-661-3 23.56 32 32.0 58 x 1/6 34.29611-30-662-1 10.37 9611-30-662-3 20.67 40 33.0 65 x 1/6 40.29611-30-663-1 11.95 9611-30-663-3 15.69 50 35.0 78 x 1/6 52.29611-30-664-1 17.84 9611-30-664-3 40.43 65 40.0 95 x 1/6 70.39611-30-665-1 27.70 9611-30-665-3 67.05 80 45.0 110 x 1/4 85.39611-30-666-1 42.76 9611-30-666-3 109.85 100 54.0 130 x 1/4 104.3

Liner9611-30-667-1 5.68 9611-30-667-3 7.51 25 44.0 22.0 28.29611-30-668-1 9.30 9611-30-668-3 16.92 32 50.0 25.0 34.29611-30-669-1 7.08 9611-30-669-3 19.16 40 56.0 26.0 40.29611-30-670-1 8.41 9611-30-670-3 18.34 50 68.0 28.0 52.29611-30-671-1 12.59 9611-30-671-3 32.26 65 86.0 32.0 70.39611-30-672-1 19.67 9611-30-672-3 28.08 80 100.0 37.0 85.39611-30-673-1 31.91 9611-30-673-3 70.27 100 121.0 44.0 104.3




1.2.93


1.2


Material

Item No.

RCPL

EUR

Material

Item No.

RCPL

EUR

Size

DNDimension (mm)

1.4301 (304) 1.4404 (316L) mm A B C D End cap9611-29-127-1 23.34 9612-1522-01 26.44 10 38.0 18.0 28 x 1/8

9611-29-128-1 16.76 9612-1522-02 25.43 15 44.0 18.0 34 x 1/8

9611-29-129-1 15.94 9612-1522-03 23.02 20 54.0 21.0 44 x 1/6

9611-29-130-1 12.97 9612-1522-04 30.55 25 63.0 21.0 52 x 1/6

9611-29-131-1 21.51 9612-1522-05 27.77 32 70.0 21.0 58 x 1/6

9611-29-132-1 13.60 9612-1522-06 24.98 40 78.0 21.0 65 x 1/6

9611-29-133-1 16.38 9612-1522-07 25.11 50 92.0 22.0 78 x 1/6

9611-29-134-1 22.33 9612-1522-08 31.63 65 112.0 25.0 95 x 1/6

9611-29-135-1 34.16 9612-1522-09 70.21 80 127.0 29.0 110 x 1/4

9611-29-137-1 55.66 9612-1522-10 101.83 100 148.0 31.0 130 x 1/4

9611-29-138-1 170.78 9612-1522-11 398.48 125 178.0 34.0 160 x 1/4

9611-29-139-1 582.53 9612-1522-12 484.50 150 210.0 40.0 190 x 1/4

End cap with chain and NBR seal disc9611-29-141-1 25.68 9612-1523-01 29.10 10 38.0 18.0 28 x 1/8 8.09611-29-142-1 18.34 9612-1523-02 27.83 15 44.0 18.0 34 x 1/8 8.09611-29-143-1 17.52 9612-1523-03 25.49 20 54.0 21.0 44 x 1/6 8.09611-29-144-1 14.29 9612-1523-04 33.52 25 63.0 21.0 52 x 1/6 8.09611-29-145-1 23.59 9612-1523-05 30.55 32 70.0 21.0 58 x 1/6 8.09611-29-146-1 14.99 9612-1523-06 27.39 40 78.0 21.0 65 x 1/6 8.09611-29-147-1 18.03 9612-1523-07 27.64 50 92.0 22.0 78 x 1/6 8.09611-29-148-1 24.79 9612-1523-08 34.79 65 112.0 25.0 95 x 1/6 8.09611-29-149-1 37.32 9612-1523-09 77.17 80 127.0 29.0 110 x 1/4 8.09611-29-151-1 60.72 9612-1523-10 111.32 100 148.0 31.0 130 x 1/4 8.09611-29-152-1 186.59 9612-1523-11 438.32 125 178.0 34.0 160 x 1/4 8.09611-29-153-1 640.09 9612-1523-12 532.57 150 210.0 40.0 190 x 1/4 8.01.4307 (304L) 1.4404 (316L) mm A B D E Blank9611-30-647-0 12.27 9612-1524-13 15.12 10 22.0 6.0 18.0 9.09611-30-648-0 12.59 9612-1524-14 17.58 15 28.0 6.0 24.0 9.09611-29-111-1 18.28 9612-1524-15 23.47 20 36.5 8.0 30.0 11.031318-0035-1 6.96 9612-1524-16 9.17 25 44.0 10.0 35.0 13.031318-0035-2 19.73 9612-1524-17 26.44 32 50.0 10.0 41.0 13.031318-0035-3 10.56 9612-1524-18 14.48 40 56.0 10.0 48.0 13.031318-0035-4 13.28 9612-1524-19 17.39 50 68.5 11.0 61.0 14.031318-0035-5 19.73 9612-1524-20 29.60 65 86.0 12.0 79.0 16.09611-30-649-0 49.34 9612-1524-21 68.31 75 93.7 12.0 86.0 16.031318-0035-6 28.21 9612-1524-22 49.97 80 100.0 12.0 93.0 16.031318-0035-8 44.28 9612-1524-23 69.58 100 121.0 15.0 114.0 20.09611-30-650-0 101.20 9612-1524-24 198.61 125 150.0 17.0 137.0 22.09611-30-651-0 206.83 9612-1524-25 306.76 150 176.0 18.0 163.0 24.0




1.2.94


1.2


Connections: Expanding ends

Material

Item No.

RCPL

EUR

Size

DNDimension (mm)

1.4301 (304) mm A B D1 ID2 Reducing liner (concentric)9611-29-094-1 18.34 25/15 44.0 22.0 18.2 26.09611-29-095-1 27.43 32/15 50.0 23.0 18.2 32.09611-29-096-1 27.43 32/20 50.0 23.0 22.2 32.09611-30-737-0 25.87 32/25 50.0 20.0 28.2 32.09611-29-097-1 60.09 40/15 56.0 25.0 18.2 38.09611-29-098-1 39.85 40/20 56.0 25.0 22.2 38.09611-30-737-1 21.82 40/25 56.0 20.0 28.2 38.09611-30-737-2 28.53 40/32 56.0 23.0 34.2 38.09611-29-099-1 46.17 50/25 68.0 28.0 28.2 50.09611-29-100-1 40.48 50/32 68.0 23.0 34.2 50.09611-30-737-3 29.22 50/40 68.0 26.0 40.2 50.09611-29-101-1 79.06 65/25 86.0 32.0 28.2 66.09611-29-102-1 46.78 65/32 86.0 32.0 34.2 66.09611-29-103-1 39.22 65/40 86.0 26.0 40.2 66.09611-30-737-4 21.00 65/50 86.0 27.0 52.2 66.09611-29-105-1 68.31 80/40 100.0 36.0 40.2 81.09611-30-737-5 77.80 80/50 100.0 30.0 52.2 81.09611-30-737-6 69.58 80/65 100.0 31.0 70.3 81.09611-29-107-1 62.37 100/50 121.0 40.0 52.2 100.09611-29-108-1 161.92 100/65 121.0 40.0 70.3 100.09611-30-737-7 137.25 100/80 121.0 42.0 85.3 100.01.4301 (304) mm B C D1 ID2 Reducing male part

9611-30-736-0 28.21 32/25 27.0 58 x 1/6 28.2 32.09611-30-736-1 32.89 40/25 28.0 65 x 1/6 28.2 38.09611-30-736-2 36.05 40/32 29.0 65 x 1/6 34.2 38.09611-29-087-1 56.93 50/25 26.0 78 x 1/6 28.2 50.09611-29-088-1 29.66 50/32 29.0 78 x 1/6 34.2 50.09611-30-736-3 31.44 50/40 35.0 78 x 1/6 40.2 50.09611-29-089-1 68.72 65/32 39.0 95 x 1/6 34.2 66.09611-29-090-1 101.20 65/40 39.0 95 x 1/6 40.2 66.09611-30-736-4 58.19 65/50 40.0 95 x 1/6 52.2 66.09611-29-091-1 94.71 80/40 43.0 110 x 1/4 40.2 81.09611-30-736-5 182.79 80/50 45.0 110 x 1/4 52.2 81.09611-30-736-6 130.93 80/65 46.0 110 x 1/4 70.3 81.09611-29-092-1 147.37 100/50 49.0 130 x 1/4 52.2 100.09611-29-093-1 136.62 100/65 49.0 130 x 1/4 70.3 100.09611-30-736-7 270.08 100/80 49.0 130 x 1/4 85.3 100.0



1.2.95


1.2


Material

Item No.

RCPL

EUR

Size

DNDimension (mm)

1.4307 (304L) mm A B C (BSP) D E Adapter, male to BSP female9611-30-519-0 42.38 10 28 x 1/8 30.0 3/8" 19.0 14.09611-30-520-0 32.89 15 34 x 1/8 30.0 1/2" 24.0 14.09612-1520-37 42.38 20 44 x 1/6 30.0 3/4" 30.0 14.09611-30-521-0 42.38 25 52 x 1/6 35.0 1" 41.0 20.09611-30-522-0 34.79 32 58 x 1/6 35.0 1 1/4" 46.0 20.09611-30-523-0 42.38 40 65 x 1/6 35.0 1 1/2" 50.0 20.09611-30-524-0 29.22 50 78 x 1/6 35.0 2" 65.0 20.09611-30-525-0 94.24 65 95 x 1/6 38.0 2 1/2" 80.0 22.09611-30-527-0 256.16 80 110 x 1/4 43.0 3" 95.0 25.09611-30-528-0 256.80 100 130 x 1/4 50.0 4" 117.0 30.0

Adapter, male to BSP male9611-30-531-0 27.89 10 28 x 1/8 40.0 3/8" 19.0 14.09611-30-532-0 30.04 15 34 x 1/8 40.0 1/2" 24.0 14.09612-1521-37 29.98 20 44 x 1/6 42.0 3/4" 30.0 14.09611-30-533-0 28.02 25 52 x 1/6 48.0 1" 41.0 20.09611-30-534-0 40.48 32 58 x 1/6 48.0 1 1/4" 46.0 20.09611-30-535-0 32.26 40 65 x 1/6 50.0 1 1/2" 50.0 20.09611-30-536-0 41.75 50 78 x 1/6 52.0 2" 65.0 20.09611-30-537-0 104.36 65 95 x 1/6 56.0 2 1/2" 80.0 22.09611-30-539-0 161.92 80 110 x 1/4 66.0 3" 95.0 25.09611-30-540-0 325.11 100 130 x 1/4 72.0 4" 117.0 30.0

Material

Item No.

RCPL

EUR

Size

DNDimension (mm)

1.4301 (304) mm A B C D Hose liner, beer9612-1577-04 30.80 25 80.0 63.0 24.0 27.09612-1577-05 39.85 32 90.0 70.0 31.0 34.09612-1577-06 49.97 40 105.0 84.0 32.0 43.09612-1577-07 44.28 50 120.0 97.0 45.0 53.09612-1577-08 60.72 65 140.0 113.0 60.0 68.09612-1577-09 131.56 80 160.0 132.0 74.0 83.09612-1577-10 163.82 100 180.0 141.0 93.0 103.0

Hose liner9612-1575-02 25.68 15 63.0 19.5 16.09612-1575-03 25.68 20 63.0 23.5 20.09612-1575-04 22.26 25 75.0 30.0 26.09612-1575-05 26.25 32 85.0 35.5 32.09612-1575-06 27.70 40 95.0 43.0 38.09612-1575-07 32.26 50 106.0 55.0 50.09612-1575-08 43.01 65 117.0 73.0 66.09612-1575-09 61.99 80 127.0 89.0 81.09612-1575-10 99.94 100 140.0 108.0 100.0




1.2.96

Sanitary, DIN 11850 Seal rings for DIN Union Parts

1.2

Product code: 5044

Item No.RCPL

EURItem No.

RCPL

EUR

Size

DNDimension (mm)

NBR FPM mm A B D Seal ring527346-01 0.39 9611-99-1861 1.78 10 20.0 4.5 12.0527346-02 0.39 9611-99-1862 2.04 15 26.0 4.5 18.0527346-03 0.39 9611-99-1863 2.14 20 33.0 4.5 23.0527346-04 0.39 9611-99-1864 1.78 25 40.0 5.0 30.0527346-05 0.39 9611-99-1865 2.73 32 46.0 5.0 36.0527346-06 0.39 9611-99-1866 2.78 40 52.0 5.0 42.0527346-07 0.51 9611-99-1867 2.78 50 64.0 5.0 54.0527346-08 0.51 9611-99-1868 4.66 65 81.0 5.0 71.0

9611-99-1264 1.02 9611-99-1869 25.55 75 88.0 5.0 78.0527346-09 1.02 9611-99-1128 5.81 80 95.0 5.0 85.0527346-11 1.02 9611-99-1870 8.92 100 114.0 6.0 104.0

9611-99-1265 2.28 9611-99-1871 20.62 125 142.0 7.0 130.09611-99-1266 2.28 9611-99-1872 24.41 150 167.0 7.0 155.0

EPDM Silicone (Q) mm A B D Seal ring9611-99-1267 0.39 9611-99-1917 0.51 10 20.0 4.5 12.09611-99-1268 0.39 9611-99-1918 0.65 15 26.0 4.5 18.09611-99-1323 0.39 9611-99-1919 0.51 20 33.0 4.5 23.09611-99-1269 0.39 9611-99-1920 0.51 25 40.0 5.0 30.09611-99-1270 0.39 9611-99-1921 0.51 32 46.0 5.0 36.09611-99-1271 0.39 9611-99-1922 0.51 40 52.0 5.0 42.09611-99-1272 0.89 9611-99-1923 1.02 50 64.0 5.0 54.09611-99-1273 0.89 9611-99-1924 1.02 65 81.0 5.0 71.09611-99-1274 1.26 9611-99-1925 1.52 75 88.0 5.0 78.09611-99-1275 1.26 9611-99-1926 1.52 80 95.0 5.0 85.09611-99-1276 1.26 9611-99-1927 1.52 100 114.0 6.0 104.09611-99-1277 2.78 9611-99-1928 5.42 125 142.0 7.0 130.09611-99-1278 2.78 9611-99-1929 4.86 150 167.0 7.0 155.0

PTFE mm A B D Seal ring9611-99-1873 0.67 10 20.0 4.5 12.09611-99-1874 0.89 15 26.0 4.5 18.09611-99-1875 1.26 20 33.0 4.5 23.09611-99-1876 1.40 25 40.0 5.0 30.09611-99-1877 1.78 32 46.0 5.0 36.09611-99-1878 1.88 40 52.0 5.0 42.09611-99-1879 3.55 50 64.0 5.0 54.09611-99-1880 5.76 65 81.0 5.0 71.09611-99-1881 12.78 75 88.0 5.0 78.09611-99-1882 6.83 80 95.0 5.0 85.09611-99-1883 11.07 100 114.0 6.0 104.09611-99-1884 15.37 125 142.0 7.0 130.09611-99-1885 15.43 150 167.0 7.0 155.0


1.2.97

Seal rings for DIN Union Parts Sanitary, DIN 11850

1.2

Product code: 5044

Item No.RCPL

EURItem No.

RCPL

EUR

Size

DNDimension (mm)

NBR EPDM mm A B Seal disc9611-29-113-1 0.96 10 28.0 3.09611-29-114-1 0.77 15 34.0 3.09611-29-115-1 0.91 20 44.0 3.09611-29-116-1 0.77 25 52.0 3.09611-29-117-1 0.77 32 58.0 3.09611-29-118-1 0.68 40 65.0 3.09611-29-119-1 0.65 50 78.0 3.09611-29-120-1 0.89 65 95.0 3.09611-29-122-1 2.53 80 110.0 3.09611-29-124-1 4.45 100 130.0 3.09611-29-125-1 8.92 125 160.0 3.09611-29-126-1 10.12 150 190.0 3.0

Seal ring, 8 mm9611-99-1838 0.80 9611-99-1851 1.26 25 8.09611-99-1839 0.91 9611-99-1852 1.59 32 8.09611-99-1840 1.27 9611-99-1853 1.52 40 8.09611-99-1841 1.82 9611-99-1854 1.52 50 8.09611-99-1842 2.44 9611-99-1855 2.04 65 8.09611-99-1843 10.18 9611-99-1856 8.41 75 8.09611-99-1844 1.80 9611-99-1857 1.40 80 8.09611-99-1845 2.06 9611-99-1858 2.40 100 8.0

Seal ring9611-90-0253 0.96 10 5.09611-90-0254 0.70 15 5.09611-90-0255 0.75 20 5.09611-90-0256 0.80 25 6.09611-90-0257 0.85 32 6.09611-90-0258 0.97 40 6.09611-90-0259 1.09 50 6.09611-90-0260 1.33 65 6.09611-90-0261 1.66 80 6.09611-90-0262 2.04 90 6.09611-90-0263 2.51 100 6.09611-90-0264 3.47 125 7.09611-90-0265 3.97 150 7.0


1.2.98

Sanitary, DIN 11850 Other fittings

1.2

Sockets and male partsProduct code: 5044

Material

Item No.

RCPL

EUR

Size

DNDimension (mm)

1.4571 (316L) mm D L Half socket9611-29-566-3 2.38 1/8 14.0 7.59611-29-567-3 2.93 1/4 18.0 11.09611-29-568-3 3.05 3/8 21.3 11.59611-29-569-3 3.61 1/2 26.4 15.09611-29-570-3 5.09 3/4 31.8 16.59611-29-571-3 5.19 1 39.5 19.09611-29-572-3 7.65 1 1/4 48.3 21.59611-29-573-3 12.27 1 1/2 54.5 21.59611-29-574-3 12.27 2 66.3 26.09611-29-575-3 27.49 2 1/2 82.0 30.09611-29-576-3 36.96 3 95.0 33.0

Socket9611-29-544-3 3.38 1/8 14.0 17.09611-29-545-3 4.38 1/4 18.0 25.09611-29-546-3 3.59 3/8 21.3 26.09611-29-547-3 5.33 1/2 26.4 34.09611-29-548-3 5.84 3/4 31.8 36.09611-29-549-3 9.68 1 39.5 43.09611-29-550-3 11.07 1 1/4 48.3 48.09611-29-551-3 12.59 1 1/2 54.5 48.09611-29-552-3 21.00 2 66.3 56.09611-29-553-3 43.01 2 1/2 82.0 65.09611-29-554-3 52.50 3 95.0 71.01.4571 (316Ti) Welding male part9611-29-588-4 2.57 1/8 30.09611-29-589-4 3.47 1/4 30.09611-29-590-4 3.34 3/8 30.09611-29-591-4 2.53 1/2 35.09611-29-592-4 3.76 3/4 40.09611-29-593-4 4.04 1 40.09611-29-594-4 7.34 1 1/4 50.09611-29-595-4 10.44 1 1/2 50.09611-29-596-4 11.57 2 55.09611-29-597-4 21.69 2 1/2 60.09611-29-598-4 22.45 3 65.0


1.2.99

Clamp Union Parts Sanitary, DIN 11850

1.2

Product code: 5045

Material

Item No.

RCPL

EUR

Material

Item No.

RCPL

EUR

Size

DNDimension (mm)

1.4301 (304) 1.4404 (316L) mm OD/ID x t A BClamp ferrule, acc. to

DIN 326769612-1561-01 15.24 9612-1561-21 16.70 10 13/10 x 1.5 34.0 18.09612-1561-02 15.37 9612-1561-22 16.70 15 19/16 x 1.5 34.0 18.09612-1561-03 15.37 9612-1561-23 16.70 20 23/20 x 1.5 34.0 18.09612-1561-04 10.37 9612-1561-24 12.02 25 29/26 x 1.5 50.5 21.59612-1561-05 15.37 9612-1561-25 17.58 32 35/32 x 1.5 50.5 21.59612-1561-06 10.56 9612-1561-26 12.33 40 41/38 x 1.5 50.5 21.59612-1561-07 11.26 9612-1561-27 15.94 50 53/50 x 1.5 64.0 21.59612-1561-08 19.73 9612-1561-28 21.25 65 70/66 x 2.0 91.0 28.09612-1561-09 30.11 9612-1561-29 36.69 80 85/81 x 2.0 106.0 28.09612-1561-10 41.75 9612-1561-30 48.70 100 104/100 x 2.0 119.0 28.09612-1561-41 111.32 9612-1561-45 136.62 125 129/125 x 2.0 155.0 28.09612-1561-42 130.30 9612-1561-46 158.13 150 154/150 x 2.0 183.0 28.0

Clamp ferrule, acc. to DIN 326769612-9353-02 14.74 10 34.0 6.09612-9353-02 14.74 15 34.0 6.09612-9353-02 14.74 20 34.0 6.09612-9353-03 10.69 25 50.5 6.09612-9353-03 10.69 32 50.5 6.09612-9353-03 10.69 40 50.5 6.09612-9353-04 16.26 50 64.0 6.09612-9353-05 25.24 65 91.0 7.09612-9353-06 30.68 80 106.0 8.09612-9353-07 36.05 100 119.0 8.09612-9353-08 102.47 125 155.0 12.09612-9353-01 325.74 150 183.0 12.0

Item No.RCPL

EURItem No.

RCPL

EURItem No.

RCPL

EUR

Size

DNDimension (mm)

EPDM NBR FPM mm A B D Seal ring9611-99-2009 6.58 9611-99-1999 4.80 9611-99-4182 17.37 10 36.2 5.5 10.29611-99-2010 5.43 9611-99-2000 4.04 9611-99-4183 17.37 15 36.2 5.5 16.29611-99-2011 5.68 9611-99-2001 4.30 9611-99-4184 17.37 20 36.2 5.5 20.29611-99-2012 1.88 9611-99-2002 3.19 9611-99-4185 18.98 25 52.7 5.5 26.29611-99-2013 2.78 9611-99-2003 4.43 9611-99-4186 18.98 32 52.7 5.5 32.29611-99-2014 1.88 9611-99-2004 2.65 9611-99-4187 20.59 40 52.7 5.5 38.29611-99-2015 2.28 9611-99-2005 3.34 9611-99-4188 22.31 50 66.2 5.5 50.29611-99-2016 3.28 9611-99-2006 4.29 9611-99-4189 25.53 65 93.2 5.5 66.29611-99-2017 4.04 9611-99-2007 7.53 9611-99-4190 31.74 80 108.2 5.5 81.29611-99-2018 5.31 9611-99-2008 10.63 9611-99-4191 34.96 100 121.2 5.5 100.29611-99-3205 7.78 On request On request 125 157.2 5.5 125.29611-99-3206 14.04 On request On request 150 185.2 5.5 150.2

B

PTFE mm A B D Seal ring9611-99-2019 40.48 10 36.2 5.1 10.09611-99-2020 31.25 15 36.2 5.1 16.09611-99-2021 36.05 20 36.2 5.1 20.09611-99-2022 32.89 25 52.7 5.1 26.09611-99-2023 46.17 32 52.7 5.1 32.09611-99-2024 44.28 40 52.7 5.1 38.09611-99-2025 50.60 50 66.2 5.1 50.09611-99-2026 53.76 65 93.2 5.1 66.09611-99-2027 80.33 80 108.2 5.1 81.09611-99-2028 98.04 100 121.2 5.1 100.0 B


1.2.100

Sanitary, DIN 11850 Clamp Rings for Clamp Union Parts

1.2

Product code: 5049

Item No.RCPL

EUR

Size

DNDimension (mm)

1.4301 (304) mm A B C A13MHM Clamp ring211053 21.76 25-40 90.9 63.8 54.0211054 25.78 50 103.9 77.4 67.1211056 35.84 65 130.9 103.6 94.5211057 40.04 100 159.5 132.6 122.2

Clamp ring9611-99-3113 42.14 10-20 69.0 43.0 37.09611-99-3114 46.61 80 141.0 113.0 109.09611-99-3203 183.92 125 221.0 168.0 159.09611-99-3204 183.92 150 254.0 197.0 187.0

13 MW Light clamp ring9612-0119-02 32.00 25-40 90.0 58.5 52.39612-0119-03 35.84 50 99.0 72.0 65.09612-0119-05 59.23 65 126.0 99.0 93.09612-0119-06 62.66 100 154.0 127.0 120.7

Clamp ring (Allen Screws)9611-31-105-1 9.77 25-40 85.5 58.59611-31-105-2 9.77 50 99.0 72.09611-31-105-4 13.10 65 126.0 99.09611-31-105-5 13.28 100 154.0 127.0




1.2.101

Clamp Rings for Clamp Union Parts Sanitary, DIN 11850

1.2

Product code: 5049

Item No.RCPL

EUR

Size

DNDimension (mm)

1.4301 (304) mm A 13MHHM Clamp ring212195 41.55 25-40 54.0212197 59.50 50 67.5212198 66.48 65 94.5212199 77.45 100 122.6

Clamp ring, wingnut9611-99-4458 25.36 10-20 37.59611-99-4453 25.48 25-40 54.09611-99-4454 31.04 50 67.59611-99-4456 42.15 65 94.59611-99-4459 47.89 80 109.59611-99-4457 49.80 100 122.6




1.2.102

Sanitary, DIN 11850 Flange connections

1.2

Product code: 5044 Finish: Semi brightSeals: EPDM

Material

Item No.

RCPL

EUR

Size

DN

Pressure

classDimension (mm)

1.4404 (316L) mm PN (bar) OD/ID x t A B C Complete flange9612-4987-01 77.17 25 16 29/26 x 1.5 79.0 50.0 4 x M89612-4987-02 96.77 32 16 35/32 x 1.5 79.0 50.0 4 x M89612-4987-03 86.02 40 16 41/38 x 1.5 87.0 50.0 4 x M89612-4987-04 63.88 50 16 53/50 x 1.5 106.0 50.0 4 x M89612-4987-05 88.55 65 10 70/66 x 2.0 125.0. 50.0 4 x M89612-4987-06 137.89 80 10 85/81 x 2.0 140.0 50.0 8 x M89612-4987-07 292.22 100 10 104/100 x 2.0 160.0 50.0 8 x M89612-4987-08 432.00 125 10 129/125 x 2.0 190.0 60.0 8 x M109612-4987-09 864.00 150 10 154/150 x 2.0 215.0 60.0 8 x M10

1.4404 (316L) mm PN (bar) OD/ID x t B E F Flange with O-ring groove9612-4930-01 37.32 25 16 29/26 x 1.5 25.0 10.0 64.09612-4930-02 47.44 32 16 35/32 x 1.5 25.0 10.0 64.09612-4930-03 41.75 40 16 41/38 x 1.5 25.0 10.0 72.09612-4930-04 30.55 50 16 53/50 x 1.5 25.0 10.0 91.09612-4930-05 42.38 65 10 70/66 x 2.0 25.0 10.0 110.09612-4930-06 67.05 80 10 85/81 x 2.0 25.0 10.0 125.09612-4930-07 143.58 100 10 104/100 x 2.0 25.0 10.0 143.09612-4930-08 211.26 125 10 129/125 x 2.0 30.0 15.0 171.09612-4930-09 426.94 150 10 154/150 x 2.0 30.0 15.0 196.0

Flange without O-ring groove9612-4929-01 37.32 25 16 29/26 x 1.5 25.0 10.0 64.09612-4929-02 47.44 32 16 35/32 x 1.5 25.0 10.0 64.09612-4929-03 41.75 40 16 41/38 x 1.5 25.0 10.0 72.09612-4929-04 30.55 50 16 53/50 x 1.5 25.0 10.0 91.09612-4929-05 42.38 65 10 70/66 x 2.0 25.0 10.0 110.09612-4929-06 67.05 80 10 85/81 x 2.0 25.0 10.0 125.09612-4929-07 143.58 100 10 104/100 x 2.0 25.0 10.0 143.09612-4929-08 211.26 125 10 129/125 x 2.0 30.0 15.0 171.09612-4929-09 426.94 150 10 154/150 x 2.0 30.0 15.0 196.0

Blank for flange9612-4931-01 89.18 25 16 10.0 64.09612-4931-02 89.18 32 16 10.0 64.09612-4931-03 99.94 40 16 10.0 72.09612-4931-04 109.42 50 16 10.0 91.09612-4931-05 110.69 65 10 10.0 110.09612-4931-06 218.21 80 10 10.0 125.09612-4931-07 196.71 100 10 10.0 143.09612-4931-08 473.11 125 10 15.0 171.09612-4931-09 796.95 150 10 15.0 196.0

NOTE: Seal rings and screws - please see later this chapter.


1.2.103

Flange connections Sanitary, DIN 11850

1.2

Product code: 5044

Item No.RCPL

EURItem No.

RCPL

EURItem No.

RCPL

EUR

Size

DNDimension (mm)

EPDM Silicone (Q) FPM mm A B C Flange seal9612-4026-01 1.02 9612-4026-11 1.88 9612-4026-21 3.28 DN25 37.2 4.1 27.49612-4026-02 1.02 9612-4026-12 1.88 9612-4026-22 3.28 DN32 43.2 4.1 33.49612-4026-03 1.14 9612-4026-13 2.30 9612-4026-23 3.04 DN40 49.2 4.1 39.49612-4026-04 1.40 9612-4026-14 2.57 9612-4026-24 4.43 DN50 61.2 4.1 51.49612-4026-05 1.52 9612-4026-15 2.97 9612-4026-25 4.92 DN65 77.2 4.1 67.49612-4026-06 2.04 9612-4026-16 3.95 9612-4026-26 5.00 DN80 92.2 4.1 82.49612-4026-07 3.04 9612-4026-17 5.92 9612-4026-27 7.59 DN100111.2 4.1 101.49612-4026-08 3.80 9612-4026-18 6.83 9612-4026-28 9.49 DN125136.2 4.1 126.49612-4026-09 5.06 9612-4026-19 9.99 9612-4026-29 14.74 DN150161.2 4.1 151.4

Silicone (Q) Flange size Screws Nut Screws and nut set9612-4993-01 1.26 DN 25-65 4xM8x30 4xM89612-4993-02 2.53 DN 80-100 8xM8x30 8xM89612-4993-03 5.68 DN 125-150 8xM10x40 8xM10


1.2.104

Sanitary, DIN 11850 Aseptic Union Parts DIN 11864-1

1.2

According to DIN 11864-1Form A with O-ringOverall length type KProduct code: 5044, 5057, 5054

Finish: Semi brightThread: Round type

Item No.RCPL

EURItem No.

RCPL

EUR

Size

DNDimension (mm)

1.4301 (304) mm A B C D Nut acc. to DIN 11851Product code: 504431318-0014-1 8.03 25 63.0 21.0 52 x 1/6 36.031318-0014-2 8.54 32 70.0 21.0 58 x 1/6 42.031318-0014-3 9.17 40 78.0 21.0 65 x 1/6 49.031318-0014-4 10.69 50 92.0 22.0 78 x 1/6 62.031318-0014-5 16.76 65 112.0 25.0 95 x 1/6 80.031318-0014-6 26.25 80 127.0 29.0 110 x 1/4 94.031318-0014-8 36.18 100 148.0 31.0 130 x 1/4 115.0

1.4404 (316L) mm OD/ID x t B C Male part acc. to DIN 11864-1Product code: 5057

9612-9288-34 10.35 25 29/26 x 1.5 26.0 52 x 1/69612-9288-35 12.82 32 35/32 x 1.5 30.0 58 x 1/69612-9288-36 13.86 40 41/38 x 1.5 31.0 65 x 1/69612-9288-37 16.45 50 53/50 x 1.5 31.0 78 x 1/69612-9288-38 24.21 65 70/66 x 2.0 36.0 95 x 1/69612-9288-39 36.23 80 85/81 x 2.0 42.0 110 x 1/49612-9288-40 55.20 100 104/100 x 2.0 50.0 130 x 1/4

1.4404 (316L) mm OD/ID x t A B Liner acc. to DIN 11864-19612-9288-44 9.95 25 29/26 x 1.5 42.9 22.09612-9288-45 10.87 32 35/32 x 1.5 48.9 25.09612-9288-46 12.08 40 41/38 x 1.5 54.9 26.09612-9288-47 15.18 50 53/50 x 1.5 66.9 30.09612-9288-48 20.87 65 70/66 x 2.0 84.9 34.09612-9288-49 32.20 80 85/81 x 2.0 98.9 38.09612-9288-50 39.10 100 104/100 x 2.0 118.9 46.0


Material

Item No.

RCPL

EUR

Material

Item No.

RCPL

EUR

Size

DNDimension (mm)

EPDM FPM mm B D Seal ring DIN 11864 - Form AProduct code: 5054

9612-9062-04 9.50 9612-9062-14 15.64 25 3.5 22.09612-9062-05 11.10 9612-9062-15 22.31 32 5.0 34.09612-9062-06 9.50 9612-9062-16 15.64 40 5.0 40.09612-9062-07 9.50 9612-9062-17 17.37 50 5.0 52.09612-9062-08 9.50 9612-9062-18 18.98 65 5.0 68.09612-9062-09 15.64 9612-9062-19 28.52 80 5.0 83.09612-9062-10 15.64 9612-9062-20 30.25 100 5.0 102.0


1.2.105

1.2.106

1.5 Tri-Clover® Sanitary ASME

The installation material in this section is manufactured to meet Tri-Clover® Sanitary tubedimensions matching ASME BPE DT-1.

Ordering LeafletsTubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5.128Bends . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5.129Tees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5.133Reducing Tees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5.134Crosses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5.135Reducers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5.136Clamp Ferrule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5.137Clamp Ferrules and End Caps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5.138Thermometer Caps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5.139Clamp Rings for Clamp Union Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5.140Gaskets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5.142Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5.145

Tubes Tri-Clover® Sanitary ASME

1.5

Tubes of manufacturing lengths of approx 6.1 metersProduct code: 5106

Finish

Item No.

RCPL

EUR

Finish

Item No.

RCPL

EUR

Size

DN/ODDimension (mm)

1.4301 (304) 1.4404 (316L) Inch mm OD/ID x tExecuted according to

3A Standard* 9613-4191-17 * 1/2 12.70 12.7/9.4 x 1.65* 9613-4191-18 * 3/4 19.05 19.0/15.7 x 1.65

9613-4191-01 * 9613-4191-11 * 1 25.40 25.4/22.1 x 1.659613-4191-02 * 9613-4191-12 * 11/2 38.10 38.1/34.8 x 1.659613-4191-03 * 9613-4191-13 * 2 50.80 50.8/47.5 x 1.659613-4191-04 * 9613-4191-14 * 21/2 63.50 63.5/60.2 x 1.659613-4191-05 * 9613-4191-15 * 3 76.20 76.2/72.9 x 1.659613-4191-06 * 9613-4191-16 * 4 101.60 101.6/97.4 x 2.11

OD/ID and t (wall thickness) of the fittings in chapter 1.5 (Tri-Clover® Sanitary ASME) with weld end connections is identical to the above.



1.5.128

Tri-Clover® Sanitary ASME Bends

1.5

Product code: 5009 Tri-Clover® SanitaryFinish: OD/ID Ra 0.8

Material

Item No.

RCPL

EUR

Material

Item No.

RCPL

EUR

Size

DN/OD

Dimension

A304 316L Inch mm Inch mm B2S

9634-000308 21.91 9634-000322 35.55 1 25.4 3.00 76.29634-000309 19.97 9634-000323 35.55 11/2 38.1 3.75 95.39634-000310 23.17 9634-000324 42.88 2 50.8 4.75 120.79634-000311 34.71 9634-000325 64.88 21/2 63.5 5.50 139.79634-000312 48.03 9634-000326 89.30 3 76.2 6.25 158.89634-000313 82.57 9634-000327 152.50 4 101.6 8.00 203.2Not available 9634-048644 973.16 6 152.4 11.50 292.1

L2S240403 21.91 245904 35.55 1 25.4 2.06 52.4241403 19.97 240015 35.55 11/2 38.1 2.94 74.6242403 23.17 240034 42.88 2 50.8 4.06 103.2243403 34.71 245966 64.88 21/2 63.5 5.19 131.8244403 48.03 240012 89.30 3 76.2 6.31 160.3245403 86.63 241735 158.24 4 101.6 8.31 211.11

2WCL060487 15.42 060589 38.25 1 25.4 1.50 38.1060084 14.58 060590 34.71 11/2 38.1 2.25 57.2060033 16.94 060421 41.87 2 50.8 3.00 76.2060185 26.46 060025 63.77 21/2 63.5 3.75 95.3060488 32.77 060281 74.99 3 76.2 4.50 114.3060275 69.09 060591 151.65 4 101.6 6.00 152.4060293 369.57 060268 451.58 6 152.4 9.00 228.6




1.5.129

Bends Tri-Clover® Sanitary ASME

1.5


Material

Item No.

RCPL

EUR

Material

Item No.

RCPL

EUR

Size

DN/OD

Dimension

A304 316L Inch mm Inch mm B2KS

9634-000508 22.50 9634-000522 36.48 1 25.4 2.25 57.29634-000509 19.72 9634-000523 36.48 11/2 38.1 2.50 63.59634-000510 23.50 9634-000524 42.88 2 50.8 3.00 76.29634-000511 30.00 9634-000525 48.86 21/2 63.5 3.38 85.79634-000512 34.63 9634-000526 58.14 3 76.2 3.63 92.19634-000513 66.56 9634-000527 101.10 4 101.6 4.50 114.3Not available 9634-048643 916.76 6 152.4 6.25 158.8

2WK060728 31.00 1 25.4 0.63 15.9060729 31.00 11/2 38.1 0.94 23.8060730 36.48 2 50.8 1.25 31.8060731 41.84 21/2 63.5 1.56 39.7060283 48.86 3 76.2 1.88 47.6060732 86.78 4 101.6 2.50 63.5

9634-050000 369.57 6 152.4 3.75 95.3




1.5.130

Tri-Clover® Sanitary ASME Bends

1.5

Product code: 5009, 5010 Tri-Clover® SanitaryFinish: OD/ID Ra 0.8

Size DimensionMaterial

Item No.

RCPL

EUR

Material

Item No.

RCPL

EUR DN/OD A B304 316L Inch mm Inch mm Inch mm L2CM

Product code: 5009240226 31.00 246076 50.97 1 25.4 2.06 52.4 2.56 65.1241229 27.30 246038 50.97 11/2 38.1 2.94 74.6 3.44 87.3242227 34.71 245920 64.70 2 50.8 4.06 103.2 4.56 115.9243229 52.87 246100 100.77 21/2 63.5 5.19 131.8 5.69 144.5244229 69.28 246096 130.59 3 76.2 6.31 160.3 6.81 173.0245210 119.04 242068 203.30 4 101.6 8.31 211.1 8.94 227.0

Product code: 5010 B2CMP9634-002915 29.15 9634-002936 49.71 1 25.4 2.00 50.89634-002916 25.61 9634-002937 49.71 11/2 38.1 2.75 69.99634-002917 33.70 9634-002938 62.35 2 50.8 3.50 88.99634-002918 54.77 9634-002939 101.10 21/2 63.5 4.25 108.09634-002919 63.19 9634-002940 116.17 3 76.2 5.00 127.09634-002920 121.16 9634-002941 226.10 4 101.6 6.63 168.3Not available 9634-050009 1315.80 6 152.4 10.50 266.7

304 Inch mm Inch mm Inch mm 2CMP-31MP211088 53.30 2 x 1 50.8 x 25.4 2.00 50.8 2.00 50.8210007 92.98 2 x 11/2 50.8 x 38.1 2.75 69.9 2.75 69.9210008 121.28 21/2 x 2 63.5 x 50.8 3.50 88.9 3.50 88.9210033 133.40 3 x 2 76.2 x 50.8 3.50 88.9 3.50 88.9210058 187.69 3 x 21/2 76.2 x 63.5 4.25 108.0 4.25 108.0

210061 348.81 4 x 3101.6 x

76.25.00 127.0 5.13 130.2



1.5.131

Bends Tri-Clover® Sanitary ASME

1.5



Item No.

RCPL

EUR

Material

Item No.

RCPL

EUR DN/OD A B304 316L Inch mm Inch mm Inch mm B2KMW

Product code: 5009On request 1 25.4 2.25 57.2 1.13 28.6On request 11/2 38.1 2.50 63.5 1.44 36.5On request 2 50.8 3.00 76.2 1.75 44.5On request 21/2 63.5 3.38 85.7 2.06 52.4On request 3 76.2 3.63 92.1 2.38 60.3On request 4 101.6 4.50 14.3 3.13 79.4

Product code: 5010 B2KMP9634-003115 38.22 9634-003136 66.56 1 25.4 1.13 28.69634-003116 32.77 9634-003137 55.61 11/2 38.1 1.44 36.59634-003117 37.32 9634-003138 65.66 2 50.8 1.75 44.59634-003118 57.24 9634-003139 101.02 21/2 63.5 2.06 52.49634-003119 73.30 9634-003140 127.96 3 76.2 2.38 60.39634-003120 163.32 9634-003141 222.30 4 101.6 3.13 79.4Not available 9634-003142 1315.80 6 152.4 5.25 133.4



1.5.132

Tri-Clover® Sanitary ASME Tees

1.5


Material

Item No.

RCPL

EUR

Material

Item No.

RCPL

EUR

Size

DN/OD

Dimension

A

Dimension

B304 316L Inch mm Inch mm Inch mm B7WWW

Product code: 50299634-000708 29.74 9634-000722 49.71 1 25.4 2.13 54.09634-000709 27.30 9634-000723 49.71 11/2 38.1 2.38 60.39634-000710 31.93 9634-000724 58.14 2 50.8 2.88 73.09634-000711 41.87 9634-000725 71.62 21/2 63.5 3.13 79.49634-000712 53.92 9634-000726 99.42 3 76.2 3.38 85.79634-000713 80.88 9634-000727 145.76 4 101.6 4.13 104.8Not available 9634-000728 958.78 6 152.4 5.63 142.9

L7WWW9613-4666-07 * 9613-4666-19 * 1 25.4 1.13 28.69613-4666-08 * 9613-4666-20 * 11/2 38.1 1.66 42.19613-4666-09 * 9613-4666-21 * 2 50.8 2.06 52.49613-4666-10 * 9613-4666-22 * 21/2 63.5 2.34 59.59613-4666-11 * 9613-4666-23 * 3 76.2 2.59 65.99613-4666-12 * 9613-4666-24 * 4 101.6 3.44 87.3

B7WWM9634-002715 34.69 9634-002736 56.41 1 25.4 2.13 54.0 2.63 66.79634-002716 31.90 9634-002737 56.41 11/2 38.1 2.38 60.3 2.88 73.09634-002717 38.22 9634-002738 68.24 2 50.8 2.88 73.0 3.38 85.79634-002718 51.36 9634-002739 88.40 21/2 63.5 3.13 79.4 3.63 92.19634-002719 65.66 9634-002740 116.17 3 76.2 3.38 85.7 3.88 98.49634-002720 101.87 9634-002741 178.47 4 101.6 4.13 104.8 4.75 120.7

Product code: 5030 B7MP9634-003315 53.92 9634-003336 76.67 1 25.4 2.63 66.79634-003316 47.18 9634-003337 67.40 11/2 38.1 2.88 73.09634-003317 53.92 9634-003338 76.67 2 50.8 3.38 85.79634-003318 71.56 9634-003339 92.68 21/2 63.5 3.63 92.19634-003319 149.97 9634-003340 194.62 3 76.2 3.88 98.49634-003320 255.10 9634-003341 327.99 4 101.6 7.13 181.0Not available 9634-003342 2241.81 6 152.4 7.13 181.0




1.5.133

Reducing Tees Tri-Clover® Sanitary ASME

1.5


Material

Item No.

RCPL

EUR

Material

Item No.

RCPL

EUR

Size

DN/OD

Dimension

A

Dimension

B304 316L Inch mm Inch mm Inch mm B7RWWW

Product code: 50299634-001217 47.99 9634-001249 81.73 11/2 x 1 38.1 x 25.4 2.38 60.3 2.38 60.39634-001218 59.77 9634-001250 108.69 2 x 1 50.8 x 25.4 2.88 73.0 2.63 66.79634-001219 59.82 9634-001251 103.63 2 x 11/2 50.8 x 38.1 2.88 73.0 2.63 66.79634-001220 85.03 9634-001252 123.75 21/2 x 1 63.5 x 25.4 3.13 79.4 2.88 73.0

9634-001221 85.10 9634-001253 123.8521/2 x

11/263.5 x 38.1 3.13 79.4 2.88 73.0

9634-001222 85.03 9634-001254 123.85 21/2 x 2 63.5 x 50.8 3.13 79.4 2.88 73.09634-001223 103.55 9634-001255 174.26 3 x 1 76.2 x 25.4 3.38 85.7 2.88 79.49634-001224 103.63 9634-001256 174.26 3 x 11/2 76.2 x 38.1 3.38 85.7 3.13 79.49634-001225 103.55 9634-001257 174.40 3 x 2 76.2 x 50.8 3.38 85.7 3.13 79.49634-001226 103.55 9634-001258 174.26 3 x 21/2 76.2 x 63.5 3.38 85.7 3.13 79.49634-001227 107.75 9634-001259 259.29 4 x 1 101.6 x 25.4 4.13 104.8 3.13 92.19634-001228 107.75 9634-001260 259.29 4 x 11/2 101.6 x 38.1 4.13 104.8 3.63 92.19634-001229 107.75 9634-001261 255.28 4 x 2 101.6 x 50.8 4.13 104.8 3.88 98.49634-001230 105.23 9634-001262 255.28 4 x 21/2 101.6 x 63.5 4.13 104.8 3.88 98.49634-001231 105.23 9634-001263 255.08 4 x 3 101.6 x 76.2 4.13 104.8 3.88 98.4Not available 9634-048301 922.85 6 x 1/2 152.4 x 12.7 5.63 142.9 5.13 130.2Not available On request 6 x 3/4 152.4 x 19.0 5.63 142.9 5.13 130.2Not available On request 6 x 1 152.4 x 25.4 5.63 142.9 5.13 130.2Not available On request 6 x 11/2 152.4 x 38.1 5.63 142.9 5.13 130.2Not available 9634-048305 890.66 6 x 2 152.4 x 50.8 5.63 142.9 5.13 130.2Not available On request 6 x 21/2 152.4 x 63.5 5.63 142.9 5.13 130.2Not available 9634-048307 890.66 6 x 3 152.4 x 76.2 5.63 142.9 5.13 130.2

Not available 9634-001264 984.95 6 x 4152.4 x

101.65.63 142.9 5.13 130.2

Product code: 5030 B7RMP9634-003834 87.62 9634-003882 140.71 2 x 1 50.8 x 25.4 3.38 85.7 3.13 79.49634-003835 87.55 9634-003883 140.59 2 x 11/2 50.8 x 38.1 3.38 85.7 3.13 79.49634-003838 119.54 9634-003886 166.68 21/2 x 2 63.5 x 50.8 3.63 92.1 3.38 85.79634-003841 247.50 9634-003889 357.23 3 x 2 76.2 x 50.8 3.88 98.4 3.88 98.49634-003842 247.50 9634-003890 399.88 3 x 21/2 76.2 x 63.5 3.88 98.4 3.88 98.49634-003843 360.36 9634-003891 452.18 4 x 1 101.6 x 25.4 4.75 120.7 4.13 104.89634-003844 347.68 9634-003892 436.07 4 x 11/2 101.6 x 38.1 4.75 120.7 4.13 104.89634-003845 342.63 9634-003893 415.87 4 x 2 101.6 x 50.8 4.75 120.7 4.38 111.19634-003846 328.32 9634-003894 415.87 4 x 21/2 101.6 x 63.5 4.75 120.7 4.38 111.19634-003847 313.16 9634-003895 409.13 4 x 3 101.6 x 76.2 4.75 120.7 4.38 111.1



1.5.134

Tri-Clover® Sanitary ASME Crosses

1.5


Material

Item No.

RCPL

EUR

Material

Item No.

RCPL

EUR

Size

DN/OD

Dimension

A304 316L Inch mm Inch mm B9WWWW

Product code: 50299634-000908 86.71 9634-000922 112.89 1 25.4 2.13 54.09634-000909 79.98 9634-000923 129.75 11/2 38.1 2.38 60.39634-000910 86.78 9634-000924 133.96 2 50.8 2.88 73.09634-000911 90.92 9634-000925 163.44 21/2 63.5 3.13 79.49634-000912 144.07 9634-000926 217.37 3 76.2 3.38 85.79634-000913 202.88 9634-000927 277.19 4 101.6 4.13 104.8

Product code: 5030 B9MP9634-003515 105.23 9634-003536 161.63 1 25.4 2.63 66.79634-003516 96.81 9634-003537 161.76 11/2 38.1 2.88 73.09634-003517 116.17 9634-003538 194.62 2 50.8 3.38 85.79634-003518 157.43 9634-003539 228.14 21/2 63.5 3.63 92.19634-003519 196.99 9634-003540 316.78 3 76.2 3.88 98.49634-003520 363.67 9634-003541 612.02 4 101.6 4.75 120.7



1.5.135

Reducers Tri-Clover® Sanitary ASME

1.5


Material

Item No.

RCPL

EUR

Size

DN/OD

Dimension

A316L Inch mm Inch mm L31

Product code: 5069246214 32.82 11/2 x 1 38.1 x 25.4 2.00 50.8

9634-047934 42.53 2 x 1 50.8 x 25.4 4.00 101.6240030 29.18 2 x 11/2 50.8 x 38.1 2.00 50.8240962 45.74 21/2 x 11/2 63.5 x 38.1 4.75 120.7246005 40.12 21/2 x 2 63.5 x 50.8 2.00 50.8246129 162.88 3 x 11/2 76.2 x 38.1 6.00 152.4240029 58.36 3 x 2 76.2 x 50.8 4.00 101.6246036 65.65 3 x 21/2 76.2 x 63.5 2.00 50.8240963 124.37 4 x 2 101.6 x 50.8 8.00 203.2240964 112.33 4 x 21/2 101.6 x 63.5 6.00 152.4246067 87.53 4 x 3 101.6 x 76.2 4.00 101.6

9634-049355 391.25 6 x 3 152.4 x 76.2 5.50 139.79634-049356 391.57 6 x 4 152.4 x 101.6 5.50 139.7

L32240976 43.77 11/2 x 1 38.1 x 25.4 2.00 50.8240977 56.97 2 x 1 50.8 x 25.4 4.00 101.6240978 47.42 2 x 11/2 50.8 x 38.1 2.00 50.8240979 53.76 21/2 x 11/2 63.5 x 38.1 4.00 101.6240980 51.06 21/2 x 2 63.5 x 50.8 2.00 50.8240982 58.36 3 x 2 76.2 x 50.8 4.00 101.6240983 76.59 3 x 21/2 76.2 x 63.5 2.00 50.8240984 149.25 4 x 2 101.6 x 50.8 8.00 203.2240985 132.39 4 x 21/2 101.6 x 63.5 6.00 152.4240986 113.06 4 x 3 101.6 x 76.2 4.00 101.6

9634-050002 444.52 6 x 3 152.4 x 76.2 5.50 139.79634-049354 444.52 6 x 4 152.4 x 101.6 5.50 139.7

Product code: 5070 B31 - 14MP9634-039716 74.99 11/2 x 1 38.1 x 25.4 3.00 76.29634-039717 91.83 2 x 1 50.8 x 25.4 5.00 127.09634-039718 68.24 2 x 11/2 50.8 x 38.1 3.00 76.29634-039720 87.62 21/2 x 11/2 63.5 x 38.1 5.00 127.09634-039721 85.10 21/2 x 2 63.5 x 50.8 3.00 76.29634-039724 109.53 3 x 2 76.2 x 50.8 5.00 127.09634-039725 105.32 3 x 21/2 76.2 x 63.5 3.00 76.29634-039730 187.03 4 x 3 101.6 x 76.2 5.13 130.29634-050022 1095.23 6 x 3 152.4 x 76.2 7.63 193.79634-050025 1191.20 6 x 4 152.4 x 101.6 7.63 193.7

B32 - 14MP9634-039816 94.36 11/2 x 1 38.1 x 25.4 3.00 76.29634-039817 117.95 2 x 1 50.8 x 25.4 5.00 127.09634-039818 87.62 2 x 11/2 50.8 x 38.1 3.00 76.29634-039820 112.81 21/2 x 11/2 63.5 x 38.1 5.00 127.09634-039821 109.53 21/2 x 2 63.5 x 50.8 3.00 76.29634-039824 128.06 3 x 2 76.2 x 50.8 5.00 127.09634-039825 127.96 3 x 21/2 76.2 x 63.5 3.00 76.29634-039830 225.61 4 x 3 101.6 x 76.2 5.13 130.2On request 6 x 3 152.4 x 76.2 7.63 193.7

9634-050021 1549.82 6 x 4 152.4 x 101.6 7.63 193.7


1.5.136

Tri-Clover® Sanitary ASME Clamp Ferrule

1.5


Material

Item No.

RCPL

EUR

Material

Item No.

RCPL

EUR

Size

DN/OD

Dimension

A304 316L Inch mm Inch mm L14AM

240606 9.11 240644 14.15 1 25.4 1.13 28.6241605 8.22 240028 14.15 11/2 38.1 1.13 28.6242605 9.20 240027 15.36 2 50.8 1.13 28.6243605 13.59 246226 22.06 21/2 63.5 1.13 28.6244606 20.11 246124 33.32 3 76.2 1.13 28.6245596 46.26 246200 77.25 4 101.6 1.13 28.6

14WMPSNot available 610205 12.47 1/2 12.7 0.50 12.7Not available 610238 12.47 3/4 19.0 0.50 12.7

610854 5.32 610365 10.05 1 25.4 0.50 12.7610855 4.36 610367 5.42 11/2 38.1 0.50 12.7610856 5.13 610368 6.97 2 50.8 0.50 12.7610857 8.13 610369 12.38 21/2 63.5 0.50 12.7610858 12.01 610370 16.10 3 76.2 0.50 12.7610859 24.20 610373 31.19 4 101.6 0.63 15.9660016 203.84 9634-049938 245.72 6 152.4 1.50 38.1

TD 321-149

14WLMP/14WLMO210908 23.64 210348 37.24 1 25.4 3.00 76.2210491 22.06 210374 37.24 11/2 38.1 3.00 76.2212101 29.22 210375 49.33 2 50.8 3.00 76.2212108 40.30 210376 70.74 21/2 63.5 3.00 76.2211209 53.05 210377 94.01 3 76.2 4.00 101.6210492 81.91 210378 143.34 4 101.6 4.00 101.6261218 449.80 260235 510.99 6 152.4 6.00 152.4




1.5.137

Clamp Ferrules and End Caps Tri-Clover® Sanitary ASME

1.5



Item No.

RCPL

EUR

Material

Item No.

RCPL

EUR DN/OD A B C304 316L Inch mm Inch mm Inch mm Inch mm 14RMP

210447 8.52 213447 13.85 1 25.4 0.75 19.1 1.00 25.4210449 5.81 213449 9.59 11/2 38.1 1.13 28.6 1.50 38.1210450 8.62 213450 13.03 2 50.8 1.31 33.3 2.00 50.8210451 14.78 213451 22.21 21/2 63.5 1.38 34.9 2.50 63.5210452 25.28 213452 37.88 3 76.2 1.44 36.5 3.00 76.2210454 59.57 213454 90.28 4 101.6 1.50 38.1 4.00 101.6

14MPW210519 20.38 210525 33.78 1 25.4 1.63 41.3 0.88 22.2 1.16 29.4210465 14.53 210526 25.13 11/2 38.1 1.63 41.3 1.38 34.9 1.67 42.5210466 18.25 210527 31.19 2 50.8 1.75 44.5 1.88 47.6 2.19 55.6210467 31.19 210528 52.12 21/2 63.5 1.75 44.5 2.38 60.3 2.70 68.7210468 35.28 210529 59.57 3 76.2 1.81 46.0 2.88 73.0 3.22 81.8210469 75.28 210530 126.59 4 101.6 2.13 54.0 3.83 97.2 4.25 108.0

16AMPNot available 210518 9.20 3/4 19.0 0.19 4.80 0.98 24.9

210501 6.01 210854 8.13 11/2 38.1 0.25 6.40 1.98 50.4210502 8.13 210855 11.54 2 50.8 0.25 6.40 2.52 63.9210503 11.08 210856 16.29 21/2 63.5 0.25 6.40 3.05 77.4210504 18.25 210857 25.13 3 76.2 0.25 6.40 3.58 90.0210506 44.31 210858 66.09 4 101.6 0.25 6.40 4.69 119.1261220 245.72 260237 307.15 6 152.4 0.44 6.58 6.58 167.1




1.5.138

Tri-Clover® Sanitary ASME Thermometer Caps

1.5



Item No.

RCPL

EUR

Material

Item No.

RCPL

EUR DN/OD A B

304 316L Inch mm Inch mm Inch mm23BMP - No tapped

hole615959 40.68 615966 91.03 1 + 11/2 38.1 1.98 50.4 0.63 15.9615958 54.17 615967 121.93 2 50.8 2.52 63.9 0.63 15.9615960 59.95 Not available 21/2 63.5 3.05 77.4 0.63 15.9615961 75.46 615969 * 3 76.2 3.58 90.9 0.63 15.9

On request 615971 * 4 101.6 4.69 119.1 0.63 15.9

23BMP - Tapped with NPT threads210623 61.34 214206 105.02 1 x 1/2 25.4 x 12.7 1.98 50.3 0.63 15.9210596 45.45 211677 101.30 11/2 x 3/4 38.1 x 19.0 1.98 50.3 0.63 15.9210626 60.97 213599 133.82 2 x 3/4 50.8 x 19.0 2.52 64.0 0.63 15.9211448 66.73 610723 * 21/2 x 3/4 63.5 x 19.0 3.05 77.5 0.63 15.9211555 84.11 610724 * 3 x 3/4 76.2 x 19.0 3.58 90.9 0.63 15.9211439 131.97 610726 * 4 x 3/4 101.6 x 19.0 4.69 119.1 0.63 15.9

* On request.



1.5.139

Clamp Rings for Clamp Union Parts Tri-Clover® Sanitary ASME

1.5

Product code: 5049 Tri-Clover® Sanitary

Material

Item No.

RCPL

EUR

Size

DN/OD

Dimension

A304 Inch mm Inch mm 13MHHM

212195 41.55 1 x 11/2 25.4 x 38.1 2.13 54.0212196 50.53 2 50.8 2.66 67.5212197 59.50 21/2 63.5 3.19 81.0212198 66.48 3 76.2 3.72 94.5212199 77.45 4 101.6 4.83 122.6210129 140.78 6 152.4 6.69 169.9

A13MHM211053 21.76 1 x 11/2 25.4 x 38.1 2.13 54.0211054 25.78 2 50.8 2.64 67.1211055 31.63 21/2 63.5 3.19 81.0211056 35.84 3 76.2 3.72 94.5211057 40.04 4 101.6 4.83 122.2211058 137.12 6 152.4 6.69 169.9

13MW9612-0119-02 32.00 11/2 38.1 2.06 52.39612-0119-03 35.84 2 50.8 2.56 65.09612-0119-04 39.50 21/2 63.5 3.12 79.29612-0119-05 59.23 3 76.2 3.66 93.09612-0119-06 62.66 4 101.6 4.75 120.7

13MHHS211290 42.05 1/2 - 3/4 12.7 - 19.0 1.13 28.6




1.5.140

Tri-Clover® Sanitary ASME Clamp Rings for Clamp Union Parts

1.5


Material

Item No.

RCPL

EUR

Size

DN/OD

Dimension

A304 Inch mm Inch mm 13MHHS

211283 63.27 11/2 38.1 2.13 54.0211284 77.15 2 50.8 2.66 67.5211286 89.05 21/2 63.5 3.19 81.0211287 104.21 3 76.2 3.72 94.5211289 120.67 4 101.6 4.83 122.6

13MHP210180 43.33 11/2 38.1 2.05 52.0210040 55.57 2 50.8 2.58 65.5210213 59.23 21/2 63.5 3.11 79.0210248 73.13 3 76.2 3.64 92.5210042 89.05 4 101.6 4.73 120.3

9634-048982 155.40 6 152.4 6.63 168.4

A12MPS210135 137.12 11/2 38.1 1.98 50.4210136 138.95 2 50.8 2.52 63.9210137 199.29 21/2 63.5 3.05 77.4210138 210.25 3 76.2 3.58 90.9210140 469.87 4 101.6 4.69 119.1




1.5.141

Gaskets Tri-Clover® Sanitary ASME

1.5


Material

Item No.

RCPL

EUR

Material

Item No.

RCPL

EUR

Material

Item No.

RCPL

EUR

Material

Item No.

RCPL

EURSize

42MP-E 42MP-U 42MP-SFY Inch 42MP290273 1.55 290272 1.27 290274 3.59 1/2

290265 1.66 290264 1.55 290266 4.07 3/4

9614-006401 * 9614-006402 * 9614-006403 * 1

42MP-G 42MP-X Inch 42MP290270 2.03 290090 3.54 1/2

290271 1.55 290099 3.48 3/4

9614-006404 * 9614-006405 * 1

40MP-E 40MP-U 40MP-SFY Inch 40MP/40MO290141 1.17 298451 0.68 290009 3.97 1290044 1.17 298452 0.39 290022 2.99 11/2

290043 1.27 298453 0.39 290030 3.38 2290048 1.36 298454 0.87 290040 5.04 21/2

290036 1.55 298455 0.96 290049 7.07 3290018 1.66 298456 1.55 290053 8.90 4290234 15.08 290112 10.71 290220 40.86 640MP-G 40MP-X 40MP-UW Inch 40MP/40MO298224 1.94 298512 1.74 298501 0.68 1298227 1.74 298507 1.55 298495 0.68 11/2

298228 1.94 298508 1.74 298496 0.68 2298223 2.22 298509 2.22 298499 0.87 21/2

298225 2.81 298510 2.51 298497 0.96 3298226 3.78 298511 2.90 298498 1.55 4298235 15.54 Not available 290195 10.32 6


Material Descriptions

Code Letter Material Code Letter MaterialE EPDM SFY Steam Resistant FluoroelastomerG PTFE X Silicone (Q)

UW White Buna NU Buna N

1.5.142

Tri-Clover® Sanitary ASME Gaskets

1.5


Material

Item No.

RCPL

EUR

Material

Item No.

RCPL

EUR

Material

Item No.

RCPL

EURSize

40MPF-E 40MPF-U 40MPF-SFY Inch 40MPF/40MOF290031 1.94 298346 1.17 290097 5.04 1290038 1.94 298347 1.17 290115 4.07 11/2

290017 1.94 298376 1.17 290117 5.04 2290035 2.51 298348 1.17 290118 8.32 21/2

290138 3.10 298375 1.17 290119 8.62 3290025 3.10 298349 2.22 290172 9.11 4290131 16.10 298220 9.11 290182 43.38 6

40MPF-X 40MPF-UW 40MPF/40MOF298411 2.03 298308 0.96 1298412 2.03 298431 0.96 11/2

298413 2.13 298417 0.96 2298414 3.10 290069 0.96 21/2

298415 3.19 298432 1.36 3298416 4.07 298433 1.94 4298605 17.50 290236 13.22 6

40MHP-E 40MHP-SFY 40MHP290029 8.03 290028 8.21 1

A40MP-GRA40MP/A40MO.

PTFE Envelope Gasket with SFY290072 3.10 1290073 2.51 11/2

290074 3.10 2290075 4.07 21/2

290076 4.55 3290077 8.62 4290085 29.22 6


1.5.143

Gaskets Tri-Clover® Sanitary ASME

1.5


Material

Item No.

RCPL

EUR

Material

Item No.

RCPL

EUR

Material

Item No.

RCPL

EUR

Size

DN/OD

40MPS-U Inch mm40MPS, 10

- Mesh Screen Gasket*298488 26.62 11/2 38.1298434 35.00 2 50.8298436 41.23 21/2 63.5290034 43.38 3 76.2298438 61.43 4 101.6

A80MP-E A80MP-SFY A80MP-U Inch mm A80MP, Orifice Plate - 316L290248 26.15 290207 37.24 290216 20.11 11/2 38.1290255 30.16 290001 43.38 290221 24.20 2 50.8290314 40.30 290002 51.19 290222 32.34 21/2 63.5290275 48.40 290180 85.63 290223 43.38 3 76.2

Material Descriptions

Code Letter Material Code Letter MaterialE EPDM SFY Steam Resistant Fluoroelastomer

U Buna N

* Wire diameter = 0.64 mm

Holes = 1.9 mm square

Open area = 56.3%

1.5.144

Tri-Clover® Sanitary ASME Adapters

1.5



Item No.

RCPL

EUR

Material

Item No.

RCPL

EUR DN/OD A304 316L Inch mm Inch mm 14MPHR

211469 38.35 213384 55.39 1 x 1 25.4 x 25.4 1.69 42.9211393 35.28 213382 58.64 11/2 x 11/2 38.1 x 38.1 1.69 42.9211387 46.26 213383 114.31 2 x 2 50.8 x 50.8 2.31 58.7211480 58.64 210722 123.60 21/2 x 21/2 63.5 x 63.5 2.00 50.8211481 83.77 211534 178.43 3 x 3 76.2 x 76.2 3.11 79.0211482 156.13 211535 275.08 4 x 4 101.6 x 101.6 3.41 86.5


Item No.

RCPL

EUR

Material

Item No.

RCPL

EUR DN/OD A B C304 316L Inch mm Inch mm Inch mm Inch mm 14MPHT

211399 23.23 211526 38.35 1 25.4 4.50 114.3 0.88 22.2 1.00 25.4211396 21.10 211527 38.35 11/2 38.1 4.50 114.3 1.38 34.9 1.50 38.1211398 26.11 211793 50.26 2 50.8 4.50 114.3 1.88 47.6 2.00 50.8211394 39.22 212039 73.53 21/2 63.5 4.50 114.3 2.38 60.3 2.50 63.5211392 47.30 213468 95.72 3 76.2 4.50 114.3 2.88 73.0 3.00 76.2211402 78.99 213493 144.27 4 101.6 4.63 117.5 3.83 97.2 4.00 101.6


Item No.

RCPL

EUR

Material

Item No.

RCPL

EUR DN/OD A B304 316L Inch mm Inch mm Inch mm 22MP

211378 124.53 210984 176.85 1 x 3/4 25.4 x 19.0 1.63 41.3211331 94.94 213625 139.62 1 x 1 25.4 x 25.4 1.63 41.3211334 114.31 213913 179.00 11/2 x 11/4 38.1 x 31.8 2.25 57.2211335 87.49 213733 139.40 11/2 x 11/2 38.1 x 38.1 2.25 57.2211434 114.31 213821 196.39 11/2 x 3/4 38.1 x 19.0 1.63 41.3211336 114.31 211736 192.67 11/2 x 1 38.1 x 25.4 1.63 41.3211362 105.02 213914 185.87 2 x 11/2 50.8 x 38.1 2.34 59.5211337 99.44 213623 159.84 2 x 2 50.8 x 50.8 1.69 42.9211539 267.65 210249 269.51 21/2 x 2 63.5 x 50.8 1.41 35.7211332 267.65 210318 269.51 21/2 x 21/2 63.5 x 63.5 2.09 53.2211340 159.84 213649 260.22 3 x 3 76.2 x 76.2 2.19 55.6211339 201.67 210737 331.77 4 x 4 101.6 x 101.6 2.66 67.5

21MP (N.P.T. Pipe Thread - Non 3A)211371 95.87 213650 143.34 1 x 3/4 25.4 x 19.0 0.98 25.0 2.19 55.6211299 79.12 213598 113.55 1 x 1 25.4 x 25.4 0.69 17.5 2.25 57.2211363 87.36 213741 148.01 11/2 x 11/4 38.1 x 31.8 0.70 17.9 2.44 61.9211300 78.99 213626 114.31 11/2 x 11/2 38.1 x 38.1 0.72 18.3 2.44 61.9211421 87.36 212034 148.92 11/2 x 3/4 38.1 x 19.0 0.55 13.9 2.19 55.6211306 87.36 213740 147.99 11/2 x 1 38.1 x 25.4 0.72 18.3 2.31 58.7211305 87.36 210821 144.05 11/2 x 2 38.1 x 50.8 0.72 18.3 2.63 66.7211354 87.36 214198 157.99 2 x 11/2 50.8 x 38.1 0.75 19.1 2.47 62.7211301 83.64 213624 131.04 2 x 2 50.8 x 50.8 0.75 19.1 2.66 67.5211369 127.32 214009 213.75 21/2 x 2 63.5 x 50.8 1.14 29.0 3.13 79.4211302 127.32 213918 202.60 21/2 x 21/2 63.5 x 63.5 1.38 34.9 3.28 83.3211303 159.84 213597 260.22 3 x 3 76.2 x 76.2 1.20 30.6 3.50 88.9211304 245.35 213596 405.19 4 x 4 101.6 x 101.6 1.30 32.9 3.81 96.8



1.5.145

1.5.146

1.7 Tri-Clover® UltraPure, Series A/DIN

The Tubes and Fittings in this section is manufactured to meet DIN 11866 Series A/DINtube dimensions.

PD SheetsTri-Clover® UltraPure Series A/DIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.7.172

Ordering LeafletsTubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.7.174Bends DIN 11865 Series A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.7.175Tees DIN 11865 Series A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.7.176Reducers DIN 11865 Series A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.7.180Aseptic Union Parts DIN 11864-1 Form A . . . . . . . . . . . . . . . . . . . . . . . . . . 1.7.184Aseptic Flange Connections DIN 11864-2 Form A Series A . . . . . . . . . . . . 1.7.187End Caps/ Blanks for Aseptic Clamp Parts 11864-3 Form A Series A . . . . . 1.7.189Aseptic Clamp Union Parts DIN 11864-3 . . . . . . . . . . . . . . . . . . . . . . . . . . 1.7.190Clamp Connections (DIN 32676) Series A . . . . . . . . . . . . . . . . . . . . . . . . . . 1.7.192Clamps and Seal rings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.7.194

Tri-Clover® UltraPure Series A/DIN Tri-Clover® UltraPure, Series A/DIN

1.7

.

kyKeep Your Process Ultra CleanTri-Clover® UltraPure Series A/DIN

.

ApplicationAlfa Laval Tri-Clover® UltraPure installation package is the perfectchoice for ultra pure processes within the demanding pharmaceutical,biotech and personal care industries.

Standard designThe UltraPure Series A/DIN tubes & fittings are in accordance toseries A in:

- DIN 32676 (Clamp connections).- DIN 11865 (Bends, Tees, Reducers).- DIN 11866 (Tubes).- DIN 11864-1 Form A /Aseptic Union Parts)- DIN 11864-2 Form A (Aseptic Flange parts)- DIN 11864-3 Form A (Aseptic Clamp Union Parts)

MaterialsUltraPure Series A/DIN is available in material 1.4435 for fittings and inmaterial 1.4404 for tubes.All tubes are annealed, pickled and passivated in accordance withDIN EN 10217-7 W2Ab.

Steel material composition in accordance to DIN 10088-1

Steel designation % by massNumber Name C Si Mn P S N Cr Mo Ni1.4404 X2CrNiMo17-12-2 ≤ 0.030 ≤ 1.00 ≤ 2.0 ≤ 0.045 ≤ 0.015b ≤ 0.11 16.5 to 18.5 2.00 to 2.50 10.0 to 13.0c

1.4435 X2CrNiMo18-14-3 ≤ 0.030 ≤ 1.00 ≤ 2.0 ≤ 0.045 ≤ 0.015b ≤ 0.11 17.0 to 19.0 2.50 to 3.00 12.5 to 15.0

b) For bars, rods, wire, sections, bright products and the relevant semi-finished products, a maximum content of 0,030 % S applies.

c) Where for special reasons, e. g. hot workability for the fabrication of seamless tubes where it is necessary to minimize the delta ferrite content, or with

the aim of low magnetic permeability, the maximum Ni content may be increased by 1,50 % (m/m) for 1.4404

ElastomersSeal rings are available in EPDM, FPM and PTFE

Elastomer properties

EPDM FPM PTFEFDA (CFR 21: 177.2600) Yes Yes YesUSP Class VI certified No No NoRecommended operating temperature, 0C -10oC to +140oC -10oC to +180oC -10oC to +220oCResistanceSteam resistance Yes No YesAlkali resistance Yes No YesResistance to fats/oils No Yes YesOzone resistance Yes Yes Yes

1.7.172

Tri-Clover® UltraPure, Series A/DIN Tri-Clover® UltraPure Series A/DIN

1.7

DimensionsDimensions and tolerances for tube material in accordance to DIN 11866 series A

External tube diameter 13.00 19.00 23.00 29.00 35.00 41.00 53.00 70.00 85.00 104.00Internal tube diameter 10.00 16.00 20.00 26.00 32.00 38.00 50.00 66.00 81.00 100.00External diameter tolerances ±0.10 ±0.10 ±0.12 ±0.15 ±0.18 ±0.21 ±0.27 ±0.35 ±0.43 ±0.52Wall thickness 1.50 1.50 1.50 1.50 1.50 1.50 1.50 2.00 2.00 2.00Wall thickness tolerances a ±0.15 ±0.15 ±0.15 ±0.15 ±0.15 ±0.15 ±0.15 ±0.15 ±0.15 ±0.15Weight kg/m 0.432 0.658 0.808 1.034 1.260 1.485 1.937 3.409 4.162 5.114

a) For tubes which have undergone after treatment (honing, polishing, electro polishing) the minimum permissible wall thickness may be reduced by

0.05 mm.

Internal and external surface finish

Hygiene classa Surface textureInternal surface Seam internal External

H3oH3

Ra < 0.80 µm Ra < 0.80 µm

H4oH4

HE4ob

HE4b

Ra < 0.40 µm Ra < 0.40 µmRa < 0.80 µm

a) Tubular fittings with external surface of Ra<0.80 µm are marked with an o (e.g. H3o), Machined fittings with external surface of Ra<0,80 µm are

marked without an o (e.g. H3)

b) Electro polished in accordance with standardized procedures involving the removal of at least 20 µm.

Fitting pressure rating

Pressure ratings in barBends,Tees, Reducers (80/200°C) 25/15Clamp unions (80/200°C) 25/15

Tube pressure ratingTable C.1 - Permissible operating pressures at room temperature -200C

Nominal size

DN/OD13.00 19.00 23.00 29.00 35.00 41.00 53.00 70.00 85.00 104.00

Permissible operating pressures in bar for tubesSeries A 369 263 209 165 137 117 90 91 75 61

The permissible operating pressures were calculated for seamless and welded tubes (v = 1) using the design value for material number 1.4404 to

DIN EN 10088-2:1995-08, Table 10 - product from C (cold strip) assuming that the permissible design tension of 100% in the seam is used.

Other standards fulfilments- All tubes and fittings are in accordance to the European pressure vessel directive (PED Directive 97/23/EC)- All plastic protection end caps are in compliance to REACH (European Community Regulation on chemicals and their safe use)

Delivery conditionTo ensure easy identification and immediate use, all Tri-Clover® UltraPure tubes & fittings are delivered as follows:

- All tubes are delivered in lengths of 6 meters (0 to + 10 mm).- Weld ends are delivered with straight-cut ends, free from burrs and breaks suitable for automatic welding.- All fittings are individually marked with heat number, material, surface finish designation, and dimension.- Internally cleaned and free from oils, grease, particulates, grinding compounds or electrolytes.- Protected with end caps and individually dry-wrapped in plastic bags.

1.7.173

Tubes Tri-Clover® UltraPure, Series A/DIN

1.7

Product code: 5112 Material: 1.4404

Finish

Item No.

RCPL

EUR

pr. meter

Size

DNDimension (mm)

Hygiene

Class

mm OD/ID x t Tube9612-90-4362 * 13.0 13.0/10.0 x 1.5 H3o9612-90-4363 * 19.0 19.0/16.0 x 1.5 H3o9612-90-4364 * 23.0 23.0/20.0 x 1.5 H3o9612-90-4365 * 29.0 29.0/26.0 x 1.5 H3o9612-90-4366 * 35.0 35.0/32.0 x 1.5 H3o9612-90-4367 * 41.0 41.0/38.0 x 1.5 H3o9612-90-4368 * 53.0 53.0/50.0 x 1.5 H3o9612-90-4369 * 70.0 70.0/66.0 x 2.0 H3o9612-90-4370 * 85.0 85.0/81.0 x 2.0 H3o9612-90-4371 * 104.0 104.0/100.0 x 2.0 H3o

Tube9612-90-4382 * 13.0 13.0/10.0 x 1.5 H4o9612-90-4383 * 19.0 19.0/16.0 x 1.5 H4o9612-90-4384 * 23.0 23.0/20.0 x 1.5 H4o9612-90-4385 * 29.0 29.0/26.0 x 1.5 H4o9612-90-4386 * 35.0 35.0/32.0 x 1.5 H4o9612-90-4387 * 41.0 41.0/38.0 x 1.5 H4o9612-90-4388 * 53.0 53.0/50.0 x 1.5 H4o9612-90-4389 * 70.0 70.0/66.0 x 2.0 H4o9612-90-4390 * 85.0 85.0/81.0 x 2.0 H4o9612-90-4392 * 104.0 104.0/100.0 x 2.0 H4o

Tube9612-90-4372 * 13.0 13.0/10.0 x 1.5 HE4o9612-90-4373 * 19.0 19.0/16.0 x 1.5 HE4o9612-90-4374 * 23.0 23.0/20.0 x 1.5 HE4o9612-90-4375 * 29.0 29.0/26.0 x 1.5 HE4o9612-90-4376 * 35.0 35.0/32.0 x 1.5 HE4o9612-90-4377 * 41.0 41.0/38.0 x 1.5 HE4o9612-90-4378 * 53.0 53.0/50.0 x 1.5 HE4o9612-90-4379 * 70.0 70.0/66.0 x 2.0 HE4o9612-90-4380 * 85.0 85.0/81.0 x 2.0 HE4o9612-90-4381 * 104.0 104.0/100.0 x 2.0 HE4o

NOTE: All tubes are delivered in lengths of 6 meters. (0 to + 10 mm)



1.7.174

Tri-Clover® UltraPure, Series A/DIN Bends DIN 11865 Series A

1.7

According to DIN 11865 table 4Product code: 5012

Material: 1.4435 (316L)

Item No.RCPL

EURItem No.

RCPL

EUR

Size

DNDimension (mm)

H3o mm OD/ID x t A B R Bend 90°9612-9052-11 38.11 10 13/10 x 1.5 51.0 25.0 25.09612-9052-12 43.02 15 19/16 x 1.5 60.0 25.0 35.09612-9052-13 58.01 20 23/20 x 1.5 65.0 25.0 40.09612-9052-14 62.48 25 29/26 x 1.5 90.0 40.0 50.09612-9052-15 69.62 32 35/32 x 1.5 95.0 40.0 55.09612-9052-16 70.51 40 41/38 x 1.5 100.0 40.0 60.09612-9052-17 76.76 50 53/50 x 1.5 110.0 40.0 70.09612-9052-18 87.47 65 70/66 x 2.0 120.0 40.0 80.09612-9052-19 134.77 80 85/81 x 2.0 145.0 55.0 90.09612-9052-20 157.97 100 104/100 x 2.0 155.0 55.0 100.0

H4o HE4o mm OD/ID x t A B R Bend 90°9612-9052-21 52.66 9613-4117-01 105.32 10 13/10 x 1.5 51.0 25.0 25.09612-9052-22 60.69 9613-4117-02 109.78 15 19/16 x 1.5 60.0 25.0 35.09612-9052-23 81.22 9613-4117-03 110.67 20 23/20 x 1.5 65.0 25.0 40.09612-9052-24 86.57 9613-4117-04 111.56 25 29/26 x 1.5 90.0 40.0 50.09612-9052-25 91.04 9613-4117-05 117.81 32 35/32 x 1.5 95.0 40.0 55.09612-9052-26 98.18 9613-4117-06 131.20 40 41/38 x 1.5 100.0 40.0 60.09612-9052-27 106.21 9613-4117-07 148.16 50 53/50 x 1.5 110.0 40.0 70.09612-9052-28 116.03 9613-4117-08 189.21 65 70/66 x 2.0 120.0 40.0 80.09612-9052-29 172.25 9613-4117-09 235.62 80 85/81 x 2.0 145.0 55.0 90.09612-9052-30 208.85 9613-4117-10 273.11 100 104/100 x 2.0 155.0 55.0 100.0

H3o mm OD/ID x t A B R Bend 45°9612-9053-11 38.11 10 13/10 x 1.5 35.8 25.0 25.09612-9053-12 43.02 15 19/16 x 1.5 39.5 25.0 35.09612-9053-13 58.01 20 23/20 x 1.5 41.6 25.0 40.09612-9053-14 62.48 25 29/26 x 1.5 60.7 40.0 50.09612-9053-15 69.62 32 35/32 x 1.5 62.8 40.0 55.09612-9053-16 70.51 40 41/38 x 1.5 64.9 40.0 60.09612-9053-17 76.76 50 53/50 x 1.5 69.0 40.0 70.09612-9053-18 87.47 65 70/66 x 2.0 73.1 40.0 80.09612-9053-19 134.77 80 85/81 x 2.0 92.3 55.0 90.09612-9053-20 157.97 100 104/100 x 2.0 96.4 55.0 100.0

H4o HE4o mm OD/ID x t A B R Bend 45°9612-9053-21 52.66 9613-4118-01 105.32 10 13/10 x 1.5 35.8 25.0 25.09612-9053-22 60.69 9613-4118-02 109.78 15 19/16 x 1.5 39.5 25.0 35.09612-9053-23 81.22 9613-4118-03 110.67 20 23/20 x 1.5 41.6 25.0 40.09612-9053-24 86.57 9613-4118-04 111.56 25 29/26 x 1.5 60.7 40.0 50.09612-9053-25 91.04 9613-4118-05 117.81 32 35/32 x 1.5 62.8 40.0 55.09612-9053-26 98.18 9613-4118-06 131.20 40 41/38 x 1.5 64.9 40.0 60.09612-9053-27 106.21 9613-4118-07 148.16 50 53/50 x 1.5 69.0 40.0 70.09612-9053-28 116.03 9613-4118-08 189.21 65 70/66 x 2.0 73.1 40.0 80.09612-9053-29 172.25 9613-4118-09 235.62 80 85/81 x 2.0 92.3 55.0 90.09612-9053-30 208.85 9613-4118-10 273.11 100 104/100 x 2.0 96.4 55.0 100.0


1.7.175

Tees DIN 11865 Series A Tri-Clover® UltraPure, Series A/DIN

1.7


Material: 1.4435 (316L)

Item No.RCPL

EURItem No.

RCPL

EUR

Size

DNDimension (mm)

H3o mm OD/ID x t A Tee9612-9054-11 88.36 10 13/10 x 1.5 35.09612-9054-12 84.79 15 19/16 x 1.5 35.09612-9054-13 87.47 20 23/20 x 1.5 40.09612-9054-14 93.71 25 29/26 x 1.5 50.09612-9054-15 100.85 32 35/32 x 1.5 55.09612-9054-16 110.67 40 41/38 x 1.5 60.09612-9054-17 130.31 50 53/50 x 1.5 80.09612-9054-18 174.93 65 70/66 x 2.0 105.09612-9054-19 238.30 80 85/81 x 2.0 130.09612-9054-20 310.59 100 104/100 x 2.0 155.0

H4o HE4o mm OD/ID x t A Tee9612-9054-21 125.84 9613-4119-01 152.62 10 13/10 x 1.5 35.09612-9054-22 117.81 9613-4119-02 153.51 15 19/16 x 1.5 35.09612-9054-23 124.06 9613-4119-03 154.40 20 23/20 x 1.5 40.09612-9054-24 128.52 9613-4119-04 147.26 25 29/26 x 1.5 50.09612-9054-25 141.02 9613-4119-05 155.30 32 35/32 x 1.5 55.09612-9054-26 150.83 9613-4119-06 163.33 40 41/38 x 1.5 60.09612-9054-27 178.50 9613-4119-07 177.61 50 53/50 x 1.5 80.09612-9054-28 229.37 9613-4119-08 254.36 65 70/66 x 2.0 105.09612-9054-29 313.27 9613-4119-09 307.91 80 85/81 x 2.0 130.09612-9054-30 410.55 9613-4119-10 384.67 100 104/100 x 2.0 155.0

HE4o mm OD/ID x t A B C Short tee9613-4121-01 98.18 10 13/10 x 1.5 35.0 10.5 109613-4121-02 98.18 15 19/16 x 1.5 35.0 11.0 169613-4121-03 98.18 20 23/20 x 1.5 40.0 13.0 209613-4121-04 91.93 25 29/26 x 1.5 50.0 16.0 269613-4121-05 97.28 32 35/32 x 1.5 55.0 19.5 329613-4121-06 99.96 40 41/38 x 1.5 60.0 23.0 389613-4121-07 106.21 50 53/50 x 1.5 80.0 30.0 509613-4121-08 149.94 65 70/66 x 2.0 105.0 40.0 669613-4121-09 184.75 80 85/81 x 2.0 130.0 47.5 819613-4121-10 224.02 100 104/100 x 2.0 155.0 58.0 100


1.7.176

Tri-Clover® UltraPure, Series A/DIN Tees DIN 11865 Series A

1.7


Material: 1.4435 (316L)

Item No.RCPL

EUR

Size

DNDimension (mm)

H3o mm OD1/ID1 x t1 OD2/ID2 x t2 A B Reducing tee9612-9056-29 93.71 15/10 19/16 x 1.5 13/10 x 1.5 35.0 35.09612-9056-30 97.28 20/10 23/20 x 1.5 13/10 x 1.5 40.0 40.09612-9056-31 97.28 20/15 23/20 x 1.5 19/16 x 1.5 40.0 40.09612-9056-32 100.85 25/10 29/26 x 1.5 13/10 x 1.5 50.0 50.09612-9056-33 100.85 25/15 29/26 x 1.5 19/16 x 1.5 50.0 50.09612-9056-34 100.85 25/20 29/26 x 1.5 23/20 x 1.5 50.0 50.09612-9056-35 110.67 32/15 35/32 x 1.5 19/16 x 1.5 55.0 55.09612-9056-36 110.67 32/20 35/32 x 1.5 23/20 x 1.5 55.0 55.09612-9056-37 110.67 32/25 35/32 x 1.5 29/26 x 1.5 55.0 55.09612-9056-38 119.60 40/15 41/38 x 1.5 19/16 x 1.5 60.0 60.09612-9056-39 119.60 40/20 41/38 x 1.5 23/20 x 1.5 60.0 60.09612-9056-40 119.60 40/25 41/38 x 1.5 29/26 x 1.5 60.0 60.09612-9056-41 119.60 40/32 41/38 x 1.5 35/32 x 1.5 60.0 60.09612-9056-42 143.69 50/15 53/50 x 1.5 19/16 x 1.5 80.0 80.09612-9056-43 143.69 50/20 53/50 x 1.5 23/20 x 1.5 80.0 80.09612-9056-44 143.69 50/25 53/50 x 1.5 29/26 x 1.5 80.0 80.09612-9056-45 143.69 50/32 53/50 x 1.5 35/32 x 1.5 80.0 80.09612-9056-46 143.69 50/40 53/50 x 1.5 41/38 x 1.5 80.0 80.09612-9056-47 192.78 65/25 70/66 x 2.0 29/26 x 1.5 105.0 80.09612-9056-48 192.78 65/32 70/66 x 2.0 35/32 x 1.5 105.0 80.09612-9056-49 192.78 65/40 70/66 x 2.0 41/38 x 1.5 105.0 80.09612-9056-50 192.78 65/50 70/66 x 2.0 53/50 x 1.5 105.0 80.09612-9056-51 260.61 80/40 85/81 x 2.0 41/38 x 1.5 130.0 105.09612-9056-52 260.61 80/50 85/81 x 2.0 53/50 x 1.5 130.0 105.09612-9056-53 260.61 80/65 85/81 x 2.0 70/66 x 2.0 130.0 105.09612-9056-54 336.47 100/50 104/100 x 2.0 53/50 x 1.5 155.0 130.09612-9056-55 336.47 100/65 104/100 x 2.0 70/66 x 2.0 155.0 130.09612-9056-56 336.47 100/80 104/100 x 2.0 85/81 x 2.0 155.0 130.0


1.7.177

Tees DIN 11865 Series A Tri-Clover® UltraPure, Series A/DIN

1.7


Material: 1.4435 (316L)

Item No.RCPL

EURItem No.

RCPL

EUR

Size

DNDimension (mm)

H4o HE4o mm OD1/ID1 x t1 OD2/ID2 x t2 A B Reducing tee9612-9056-57 125.84 9613-4120-01 163.33 15/10 19/16 x 1.5 13/10 x 1.5 35.0 35.09612-9056-58 132.98 9613-4120-02 162.44 20/10 23/20 x 1.5 13/10 x 1.5 40.0 40.09612-9056-59 132.98 9613-4120-03 162.44 20/15 23/20 x 1.5 19/16 x 1.5 40.0 40.09612-9056-60 134.77 9613-4120-04 157.97 25/10 29/26 x 1.5 13/10 x 1.5 50.0 50.09612-9056-61 134.77 9613-4120-05 157.97 25/15 29/26 x 1.5 19/16 x 1.5 50.0 50.09612-9056-62 134.77 9613-4120-06 157.97 25/20 29/26 x 1.5 23/20 x 1.5 50.0 50.09612-9056-63 149.05 9613-4120-07 167.79 32/15 35/32 x 1.5 19/16 x 1.5 55.0 55.09612-9056-64 149.05 9613-4120-08 167.79 32/20 35/32 x 1.5 23/20 x 1.5 55.0 55.09612-9056-65 149.05 9613-4120-09 167.79 32/25 35/32 x 1.5 29/26 x 1.5 55.0 55.09612-9056-66 163.33 9613-4120-11 176.72 40/15 41/38 x 1.5 19/16 x 1.5 60.0 60.09612-9056-67 163.33 9613-4120-12 176.72 40/20 41/38 x 1.5 23/20 x 1.5 60.0 60.09612-9056-68 163.33 9613-4120-13 176.72 40/25 41/38 x 1.5 29/26 x 1.5 60.0 60.09612-9056-69 163.33 9613-4120-14 176.72 40/32 41/38 x 1.5 35/32 x 1.5 60.0 60.09612-9056-70 189.21 9613-4120-16 193.67 50/15 53/50 x 1.5 19/16 x 1.5 80.0 80.09612-9056-71 189.21 9613-4120-17 193.67 50/20 53/50 x 1.5 23/20 x 1.5 80.0 80.09612-9056-72 189.21 9613-4120-18 193.67 50/25 53/50 x 1.5 29/26 x 1.5 80.0 80.09612-9056-73 189.21 9613-4120-19 193.67 50/32 53/50 x 1.5 35/32 x 1.5 80.0 80.09612-9056-74 189.21 9613-4120-20 193.67 50/40 53/50 x 1.5 41/38 x 1.5 80.0 80.09612-9056-75 246.33 9613-4120-22 274.89 65/25 70/66 x 2.0 29/26 x 1.5 105.0 80.09612-9056-76 246.33 9613-4120-23 274.89 65/32 70/66 x 2.0 35/32 x 1.5 105.0 80.09612-9056-77 246.33 9613-4120-24 274.89 65/40 70/66 x 2.0 41/38 x 1.5 105.0 80.09612-9056-78 246.33 9613-4120-25 274.89 65/50 70/66 x 2.0 53/50 x 1.5 105.0 80.09612-9056-79 332.90 9613-4120-26 333.80 80/40 85/81 x 2.0 41/38 x 1.5 130.0 105.09612-9056-80 332.90 9613-4120-27 333.80 80/50 85/81 x 2.0 53/50 x 1.5 130.0 105.09612-9056-81 332.90 9613-4120-28 333.80 80/65 85/81 x 2.0 70/66 x 2.0 130.0 105.09612-9056-82 437.33 9613-4120-29 418.58 100/50 104/100 x 2.0 53/50 x 1.5 155.0 130.09612-9056-83 437.33 9613-4120-30 418.58 100/65 104/100 x 2.0 70/66 x 2.0 155.0 130.09612-9056-84 437.33 9613-4120-31 418.58 100/80 104/100 x 2.0 85/81 x 2.0 155.0 130.0


1.7.178

Tri-Clover® UltraPure, Series A/DIN Tees DIN 11865 Series A

1.7


Material: 1.4435 (316L)

Item No.RCPL

EUR

Size

DNDimension (mm)

HE4o mm OD1/ID1 x t1 OD2/ID2 x t2 A B Reducing tee, Short9613-4122-01 100.85 15/10 19/16 x 1.5 13/10 x 1.5 35.0 11.09613-4122-02 100.85 20/10 23/20 x 1.5 13/10 x 1.5 40.0 13.09613-4122-03 100.85 20/15 23/20 x 1.5 19/16 x 1.5 40.0 13.09613-4122-04 96.39 25/10 29/26 x 1.5 13/10 x 1.5 50.0 17.09613-4122-05 96.39 25/15 29/26 x 1.5 19/16 x 1.5 50.0 16.09613-4122-06 96.39 25/20 29/26 x 1.5 23/20 x 1.5 50.0 16.09613-4122-07 99.96 32/15 35/32 x 1.5 19/16 x 1.5 55.0 19.09613-4122-08 99.96 32/20 35/32 x 1.5 23/20 x 1.5 55.0 19.09613-4122-09 99.96 32/25 35/32 x 1.5 29/26 x 1.5 55.0 19.09613-4122-10 104.42 40/15 41/38 x 1.5 19/16 x 1.5 60.0 23.59613-4122-11 104.42 40/20 41/38 x 1.5 23/20 x 1.5 60.0 22.09613-4122-12 104.42 40/25 41/38 x 1.5 29/26 x 1.5 60.0 22.09613-4122-13 104.42 40/32 41/38 x 1.5 35/32 x 1.5 60.0 22.59613-4122-14 109.78 50/15 53/50 x 1.5 19/16 x 1.5 80.0 30.09613-4122-15 109.78 50/20 53/50 x 1.5 23/20 x 1.5 80.0 30.09613-4122-16 109.78 50/25 53/50 x 1.5 29/26 x 1.5 80.0 28.09613-4122-17 109.78 50/32 53/50 x 1.5 35/32 x 1.5 80.0 28.59613-4122-18 109.78 50/40 53/50 x 1.5 41/38 x 1.5 80.0 29.09613-4122-19 156.19 65/25 70/66 x 2.0 29/26 x 1.5 105.0 40.09613-4122-20 156.19 65/32 70/66 x 2.0 35/32 x 1.5 105.0 37.09613-4122-21 156.19 65/40 70/66 x 2.0 41/38 x 1.5 105.0 37.59613-4122-22 156.19 65/50 70/66 x 2.0 53/50 x 1.5 105.0 38.59613-4122-23 195.46 80/40 85/81 x 2.0 41/38 x 1.5 130.0 45.09613-4122-24 195.46 80/50 85/81 x 2.0 53/50 x 1.5 130.0 46.09613-4122-25 195.46 80/65 85/81 x 2.0 70/66 x 2.0 130.0 47.59613-4122-26 232.05 100/50 104/100 x 2.0 53/50 x 1.5 155.0 55.59613-4122-27 232.05 100/65 104/100 x 2.0 70/66 x 2.0 155.0 57.09613-4122-28 232.05 100/80 104/100 x 2.0 85/81 x 2.0 155.0 57.0


1.7.179

Reducers DIN 11865 Series A Tri-Clover® UltraPure, Series A/DIN

1.7


Material: 1.4435 (316L)

Item No.RCPL

EURItem No.

RCPL

EUR

Size

DNDimension (mm)

H3o H4o mm OD1/ID1 x t1 OD2/ID2 x t2 A Concentric reducer9612-9058-01 81.22 9612-9059-71 110.67 15/10 19/16 x 1.5 13/10 x 1.5 60.09612-9058-02 94.61 9612-9059-72 127.63 20/10 23/20 x 1.5 13/10 x 1.5 60.09612-9058-03 84.79 9612-9059-73 114.24 20/15 23/20 x 1.5 19/16 x 1.5 60.09612-9058-04 116.03 9612-9059-74 157.08 25/10 29/26 x 1.5 13/10 x 1.5 70.09612-9058-05 94.61 9612-9059-75 126.74 25/15 29/26 x 1.5 19/16 x 1.5 70.09612-9058-06 85.68 9612-9059-76 116.03 25/20 29/26 x 1.5 23/20 x 1.5 70.09612-9058-07 108.89 9612-9059-77 146.37 32/15 35/32 x 1.5 19/16 x 1.5 80.09612-9058-08 97.28 9612-9059-78 130.31 32/20 35/32 x 1.5 23/20 x 1.5 80.09612-9058-09 91.04 9612-9059-79 121.38 32/25 35/32 x 1.5 29/26 x 1.5 80.09612-9058-10 108.89 9612-9059-80 146.37 40/15 41/38 x 1.5 19/16 x 1.5 90.09612-9058-11 97.28 9612-9059-81 130.31 40/20 41/38 x 1.5 23/20 x 1.5 90.09612-9058-12 91.04 9612-9059-82 121.38 40/25 41/38 x 1.5 29/26 x 1.5 90.09612-9058-13 91.04 9612-9059-83 121.38 40/32 41/38 x 1.5 35/32 x 1.5 90.09612-9058-14 125.84 9612-9059-84 170.47 50/15 53/50 x 1.5 19/16 x 1.5 90.09612-9058-15 116.03 9612-9059-85 156.19 50/20 53/50 x 1.5 23/20 x 1.5 90.09612-9058-16 103.53 9612-9059-86 141.02 50/25 53/50 x 1.5 29/26 x 1.5 90.09612-9058-17 99.07 9612-9059-87 133.88 50/32 53/50 x 1.5 35/32 x 1.5 90.09612-9058-18 96.39 9612-9059-88 132.98 50/40 53/50 x 1.5 41/38 x 1.5 90.09612-9058-19 224.91 9612-9059-89 305.24 65/25 70/66 x 2.0 29/26 x 1.5 110.09612-9058-20 213.31 9612-9059-90 291.85 65/32 70/66 x 2.0 35/32 x 1.5 110.09612-9058-21 203.49 9612-9059-91 248.12 65/40 70/66 x 2.0 41/38 x 1.5 110.09612-9058-22 199.03 9612-9059-92 246.33 65/50 70/66 x 2.0 53/50 x 1.5 110.09612-9058-23 288.28 9612-9059-93 381.10 80/40 85/81 x 2.0 41/38 x 1.5 110.09612-9058-24 264.18 9612-9059-94 361.46 80/50 85/81 x 2.0 53/50 x 1.5 110.09612-9058-25 254.36 9612-9059-95 343.61 80/65 85/81 x 2.0 70/66 x 2.0 110.09612-9058-26 408.77 9612-9059-96 550.67 100/50 104/100 x 2.0 53/50 x 1.5 135.09612-9058-27 381.10 9612-9059-97 512.30 100/65 104/100 x 2.0 70/66 x 2.0 135.09612-9058-28 349.86 9612-9059-98 464.10 100/80 104/100 x 2.0 85/81 x 2.0 135.0


1.7.180

Tri-Clover® UltraPure, Series A/DIN Reducers DIN 11865 Series A

1.7


Material: 1.4435 (316L)

Item No.RCPL

EUR

Size

DNDimension (mm)

HE4o mm OD1/ID1 x t1 OD2/ID2 x t2 A Concentric reducer9613-4123-01 145.48 15/10 19/16 x 1.5 13/10 x 1.5 60.09613-4123-02 160.65 20/10 23/20 x 1.5 13/10 x 1.5 60.09613-4123-03 149.05 20/15 23/20 x 1.5 19/16 x 1.5 60.09613-4123-04 159.76 25/10 29/26 x 1.5 13/10 x 1.5 70.09613-4123-05 145.48 25/15 29/26 x 1.5 19/16 x 1.5 70.09613-4123-06 134.77 25/20 29/26 x 1.5 23/20 x 1.5 70.09613-4123-07 154.40 32/15 35/32 x 1.5 19/16 x 1.5 80.09613-4123-08 142.80 32/20 35/32 x 1.5 23/20 x 1.5 80.09613-4123-09 137.45 32/25 35/32 x 1.5 29/26 x 1.5 80.09613-4123-10 159.76 40/15 41/38 x 1.5 19/16 x 1.5 90.09613-4123-11 148.16 40/20 41/38 x 1.5 23/20 x 1.5 90.09613-4123-12 145.48 40/25 41/38 x 1.5 29/26 x 1.5 90.09613-4123-13 145.48 40/32 41/38 x 1.5 35/32 x 1.5 90.09613-4123-14 174.93 50/15 53/50 x 1.5 19/16 x 1.5 90.09613-4123-15 165.11 50/20 53/50 x 1.5 23/20 x 1.5 90.09613-4123-16 154.40 50/25 53/50 x 1.5 29/26 x 1.5 90.09613-4123-17 149.94 50/32 53/50 x 1.5 35/32 x 1.5 90.09613-4123-18 147.26 50/40 53/50 x 1.5 41/38 x 1.5 90.09613-4123-19 278.46 65/25 70/66 x 2.0 29/26 x 1.5 110.09613-4123-20 266.86 65/32 70/66 x 2.0 35/32 x 1.5 110.09613-4123-21 257.04 65/40 70/66 x 2.0 41/38 x 1.5 110.09613-4123-22 252.58 65/50 70/66 x 2.0 53/50 x 1.5 110.09613-4123-23 362.36 80/40 85/81 x 2.0 41/38 x 1.5 110.09613-4123-24 342.72 80/50 85/81 x 2.0 53/50 x 1.5 110.09613-4123-25 332.01 80/65 85/81 x 2.0 70/66 x 2.0 110.09613-4123-26 576.56 100/50 104/100 x 2.0 53/50 x 1.5 135.09613-4123-27 540.86 100/65 104/100 x 2.0 70/66 x 2.0 135.09613-4123-28 492.66 100/80 104/100 x 2.0 85/81 x 2.0 135.0


1.7.181

Reducers DIN 11865 Series A Tri-Clover® UltraPure, Series A/DIN

1.7


Material: 1.4435 (316L)

Item No.RCPL

EURItem No.

RCPL

EUR

Size

DNDimension (mm)

H3o H4o mm OD1/ID1 x t1 OD2/ID2 x t2 A Eccentric reducer9612-9059-41 116.03 9612-9080-52 156.19 15/10 19/16 x 1.5 13/10 x 1.5 60.09612-9059-42 121.38 9612-9080-53 164.22 20/10 23/20 x 1.5 13/10 x 1.5 60.09612-9059-43 107.10 9612-9080-54 145.48 20/15 23/20 x 1.5 19/16 x 1.5 60.09612-9059-44 131.20 9612-9080-55 178.50 25/10 29/26 x 1.5 13/10 x 1.5 70.09612-9059-45 117.81 9612-9080-56 158.87 25/15 29/26 x 1.5 19/16 x 1.5 70.09612-9059-46 107.10 9612-9080-57 144.59 25/20 29/26 x 1.5 23/20 x 1.5 70.09612-9059-47 130.31 9612-9080-58 175.82 32/15 35/32 x 1.5 19/16 x 1.5 80.09612-9059-48 119.60 9612-9080-59 162.44 32/20 35/32 x 1.5 23/20 x 1.5 80.09612-9059-49 113.35 9612-9080-60 150.83 32/25 35/32 x 1.5 29/26 x 1.5 80.09612-9059-50 130.31 9612-9080-61 175.82 40/15 41/38 x 1.5 19/16 x 1.5 90.09612-9059-51 119.60 9612-9080-62 162.44 40/20 41/38 x 1.5 23/20 x 1.5 90.09612-9059-52 113.35 9612-9080-63 150.83 40/25 41/38 x 1.5 29/26 x 1.5 90.09612-9059-53 113.35 9612-9080-64 150.83 40/32 41/38 x 1.5 35/32 x 1.5 90.09612-9059-54 146.37 9612-9080-65 199.03 50/15 53/50 x 1.5 19/16 x 1.5 90.09612-9059-55 134.77 9612-9080-66 183.86 50/20 53/50 x 1.5 23/20 x 1.5 90.09612-9059-56 128.52 9612-9080-67 174.93 50/25 53/50 x 1.5 29/26 x 1.5 90.09612-9059-57 126.74 9612-9080-68 173.15 50/32 53/50 x 1.5 35/32 x 1.5 90.09612-9059-58 120.49 9612-9080-69 164.22 50/40 53/50 x 1.5 41/38 x 1.5 90.09612-9059-59 265.97 9612-9080-70 361.46 65/25 70/66 x 2.0 29/26 x 1.5 110.09612-9059-60 265.97 9612-9080-71 361.46 65/32 70/66 x 2.0 35/32 x 1.5 110.09612-9059-61 249.01 9612-9080-72 336.47 65/40 70/66 x 2.0 41/38 x 1.5 110.09612-9059-62 244.55 9612-9080-73 329.33 65/50 70/66 x 2.0 53/50 x 1.5 110.09612-9059-63 422.15 9612-9080-74 569.42 80/40 85/81 x 2.0 41/38 x 1.5 110.09612-9059-64 405.20 9612-9080-75 547.10 80/50 85/81 x 2.0 53/50 x 1.5 110.09612-9059-65 384.67 9612-9080-76 517.65 80/65 85/81 x 2.0 70/66 x 2.0 110.09612-9059-66 564.95 9612-9080-77 763.98 100/50 104/100 x 2.0 53/50 x 1.5 135.09612-9059-67 532.82 9612-9080-78 720.25 100/65 104/100 x 2.0 70/66 x 2.0 135.09612-9059-68 510.51 9612-9080-79 692.58 100/80 104/100 x 2.0 85/81 x 2.0 135.0

1.7.182

Tri-Clover® UltraPure, Series A/DIN Reducers DIN 11865 Series A

1.7


Material: 1.4435 (316L)

Item No.RCPL

EUR

Size

DNDimension (mm)

HE4o mm OD1/ID1 x t1 OD2/ID2 x t2 A Eccentric reducer9613-4124-01 188.32 15/10 19/16 x 1.5 13/10 x 1.5 60.09613-4124-02 197.24 20/10 23/20 x 1.5 13/10 x 1.5 60.09613-4124-03 178.50 20/15 23/20 x 1.5 19/16 x 1.5 60.09613-4124-04 202.60 25/10 29/26 x 1.5 13/10 x 1.5 70.09613-4124-05 184.75 25/15 29/26 x 1.5 19/16 x 1.5 70.09613-4124-06 168.68 25/20 29/26 x 1.5 23/20 x 1.5 70.09613-4124-07 199.92 32/15 35/32 x 1.5 19/16 x 1.5 80.09613-4124-08 186.53 32/20 35/32 x 1.5 23/20 x 1.5 80.09613-4124-09 176.72 32/25 35/32 x 1.5 29/26 x 1.5 80.09613-4124-10 199.92 40/15 41/38 x 1.5 19/16 x 1.5 90.09613-4124-11 186.53 40/20 41/38 x 1.5 23/20 x 1.5 90.09613-4124-12 176.72 40/25 41/38 x 1.5 29/26 x 1.5 90.09613-4124-13 176.72 40/32 41/38 x 1.5 35/32 x 1.5 90.09613-4124-14 221.34 50/15 53/50 x 1.5 19/16 x 1.5 90.09613-4124-15 206.17 50/20 53/50 x 1.5 23/20 x 1.5 90.09613-4124-16 197.24 50/25 53/50 x 1.5 29/26 x 1.5 90.09613-4124-17 196.35 50/32 53/50 x 1.5 35/32 x 1.5 90.09613-4124-18 188.32 50/40 53/50 x 1.5 41/38 x 1.5 90.09613-4124-19 394.49 65/25 70/66 x 2.0 29/26 x 1.5 110.09613-4124-20 394.49 65/32 70/66 x 2.0 35/32 x 1.5 110.09613-4124-21 373.07 65/40 70/66 x 2.0 41/38 x 1.5 110.09613-4124-22 363.25 65/50 70/66 x 2.0 53/50 x 1.5 110.09613-4124-23 594.41 80/40 85/81 x 2.0 41/38 x 1.5 110.09613-4124-24 572.09 80/50 85/81 x 2.0 53/50 x 1.5 110.09613-4124-25 543.53 80/65 85/81 x 2.0 70/66 x 2.0 110.09613-4124-26 780.94 100/50 104/100 x 2.0 53/50 x 1.5 135.09613-4124-27 738.10 100/65 104/100 x 2.0 70/66 x 2.0 135.09613-4124-28 713.11 100/80 104/100 x 2.0 85/81 x 2.0 135.0


1.7.183

Aseptic Union Parts DIN 11864-1 Tri-Clover® UltraPure, Series A/DIN

1.7

According to DIN 11864-1 form A with O-ringProduct code: 5052

Material: 1.4435 (316L)Connections: For orbital welding

Item No.RCPL

EURItem No.

RCPL

EUR

Size

DNDimension (mm)

H3o H4o mm OD/ID x t A B Male part9612-9046-61 47.12 9612-9046-81 64.52 10 13/10 x 1.5 28 x 1/8 41.09612-9046-62 48.48 9612-9046-82 64.52 15 19/16 x 1.5 34 x 1/8 41.09612-9046-63 48.48 9612-9046-83 65.49 20 23/20 x 1.5 44 x 1/6 43.09612-9046-64 49.85 9612-9046-84 66.47 25 29/26 x 1.5 52 x 1/6 43.09612-9046-65 53.76 9612-9046-85 73.31 32 35/32 x 1.5 58 x 1/6 48.09612-9046-66 54.74 9612-9046-86 74.29 40 41/38 x 1.5 65 x 1/6 48.09612-9046-67 66.47 9612-9046-87 91.89 50 53/50 x 1.5 78 x 1/6 48.09612-9046-68 92.86 9612-9046-88 125.12 65 70/66 x 2.0 95 x 1/6 60.09612-9046-69 152.49 9612-9046-89 204.30 80 85/81 x 2.0 110 x 1/4 64.09612-9046-70 186.70 9612-9046-90 250.24 100 104/100 x 2.0 130 x 1/4 64.0

Liner9612-9046-71 44.38 9612-9047-01 59.63 10 13/10 x 1.5 39.09612-9046-72 44.38 9612-9047-02 59.63 15 19/16 x 1.5 39.09612-9046-73 45.85 9612-9047-03 61.58 20 23/20 x 1.5 38.09612-9046-74 45.85 9612-9047-04 62.56 25 29/26 x 1.5 40.09612-9046-75 50.83 9612-9047-05 66.47 32 35/32 x 1.5 47.09612-9046-76 52.79 9612-9047-06 71.36 40 41/38 x 1.5 47.09612-9046-77 65.49 9612-9047-07 88.95 50 53/50 x 1.5 48.09612-9046-78 88.95 9612-9047-08 119.26 65 70/66 x 2.0 61.09612-9046-79 124.14 9612-9047-09 165.20 80 85/81 x 2.0 61.09612-9046-80 161.29 9612-9047-10 218.96 100 104/100 x 2.0 66.0


1.7.184

Tri-Clover® UltraPure, Series A/DIN Aseptic Union Parts DIN 11864-1

1.7

According to DIN 11864-1 form A with O-ringProduct code for nut DIN 11851: 5044Product code: EPDM, FPM: 5052

Nut: 1.4301 (304), 1.4404 (316L)Thread: Round type

Item No.RCPL

EURItem No.

RCPL

EUR

Size

DNDimension (mm)

1.4301 (304) 1.4404 (316L) mm A B C D Nut DIN 118519611-30-642-0 5.13 9612-1507-01 7.83 10 38.0 18.0 28 x 1/8 14.09611-30-643-0 8.92 9612-1507-02 14.04 15 44.0 18.0 34 x 1/8 25.09611-29-002-1 6.26 9612-1507-03 9.77 20 54.0 20.0 44 x 1/6 31.031318-0014-1 8.03 9612-1507-04 15.37 25 63.0 21.0 52 x 1/6 36.031318-0014-2 8.54 9612-1507-05 14.17 32 70.0 21.0 58 x 1/6 42.031318-0014-3 9.17 9612-1507-06 15.37 40 78.0 21.0 65 x 1/6 49.031318-0014-4 10.69 9612-1507-07 17.39 50 92.0 22.0 78 x 1/6 62.031318-0014-5 16.76 9612-1507-08 26.82 65 112.0 25.0 95 x 1/6 80.031318-0014-6 26.25 9612-1507-10 41.75 80 127.0 29.0 110 x 1/4 94.031318-0014-8 36.18 9612-1507-11 59.20 100 148.0 31.0 130 x 1/4 115.0


Item No.RCPL

EURItem No.

RCPL

EUR

Size

DNDimension (mm)

EPDM FPM mm B D Seal ring for DIN 118649612-9062-01 7.91 9612-9062-11 14.15 10 3.5 12.09612-9062-02 7.91 9612-9062-12 14.15 15 3.5 18.09612-9062-03 7.91 9612-9062-13 15.64 20 3.5 22.09612-9062-04 9.50 9612-9062-14 15.64 25 3.5 28.09612-9062-05 11.10 9612-9062-15 22.31 32 5.0 34.09612-9062-06 9.50 9612-9062-16 15.64 40 5.0 40.09612-9062-07 9.50 9612-9062-17 17.37 50 5.0 52.09612-9062-08 9.50 9612-9062-18 18.98 65 5.0 68.09612-9062-09 15.64 9612-9062-19 28.52 80 5.0 83.09612-9062-10 15.64 9612-9062-20 30.25 100 5.0 102.0

1.7.185

Aseptic Union Parts DIN 11864-1 Tri-Clover® UltraPure, Series A/DIN

1.7

For DIN 11864-1, Form AProduct code: 5054

Material: 1.4435 (316L)

Item No.RCPL

EUR

Size

DNDimension (mm)

H4o mm A B C Male blank9612-9047-31 86.02 10 28 x 1/8 24.0 24.09612-9047-32 87.98 15 34 x 1/8 28.0 24.09612-9047-33 91.89 20 44 x 1/6 34.0 24.09612-9047-34 102.64 25 52 x 1/6 44.0 24.09612-9047-35 106.55 32 58 x 1/6 53.0 24.09612-9047-36 108.50 40 65 x 1/6 60.0 24.09612-9047-37 121.21 50 78 x 1/6 72.0 24.09612-9047-38 140.76 65 95 x 1/6 87.0 28.09612-9047-39 157.38 80 100 x 1/4 100.0 28.09612-9047-40 190.61 100 130 x 1/4 120.0 30.0

Liner9612-9047-41 52.79 10 18.0 9.09612-9047-42 53.76 15 24.0 9.09612-9047-43 55.72 20 30.0 10.09612-9047-44 61.58 25 35.0 12.09612-9047-45 62.56 32 41.0 13.09612-9047-46 63.54 40 48.0 13.09612-9047-47 73.31 50 61.0 14.09612-9047-48 83.09 65 79.0 16.09612-9047-49 93.84 80 93.0 16.09612-9047-50 129.03 100 114.0 20.0


1.7.186

Tri-Clover® UltraPure, Series A/DIN Aseptic Flange Connections DIN 11864-2

1.7

According to DIN 11864-2 form A with O-ringProduct code: H3o: 5052

Material: 1.4435 (316L)

Item No.RCPL

EURItem No.

RCPL

EUR

Size

DNDimension (mm)

H3o H4o mm OD/ID x t A B F Flange with O-ring groove9612-9048-61 66.47 9612-9048-81 88.95 10 13/10 x 1.5 54.0 41.5 37.09612-9048-62 67.45 9612-9048-82 92.86 15 19/16 x 1.5 59.0 41.5 42.09612-9048-63 68.43 9612-9048-83 93.84 20 23/20 x 1.5 64.0 41.5 47.09612-9048-64 73.31 9612-9048-84 94.82 25 29/26 x 1.5 70.0 41.5 53.09612-9048-65 75.27 9612-9048-85 99.71 32 35/32 x 1.5 76.0 46.5 59.09612-9048-66 81.13 9612-9048-86 109.48 40 41/38 x 1.5 82.0 46.5 65.09612-9048-67 89.93 9612-9048-87 121.21 50 53/50 x 1.5 94.0 46.5 77.09612-9048-68 116.32 9612-9048-88 154.45 65 70/66 x 2.0 113.0 55.5 95.09612-9048-69 137.83 9612-9048-89 185.73 80 85/81 x 2.0 133.0 59.5 112.09612-9048-70 174.00 9612-9048-90 233.62 100 104/100 x 2.0 159.0 59.5 137.0

Flange without O-ring groove9612-9048-71 63.54 9612-9049-01 84.07 10 13/10 x 1.5 54.0 40.0 37.09612-9048-72 66.47 9612-9049-02 88.95 15 19/16 x 1.5 59.0 40.0 42.09612-9048-73 66.47 9612-9049-03 88.95 20 23/20 x 1.5 64.0 40.0 47.09612-9048-74 67.45 9612-9049-04 91.89 25 29/26 x 1.5 70.0 40.0 53.09612-9048-75 73.31 9612-9049-05 94.82 32 35/32 x 1.5 76.0 45.0 59.09612-9048-76 77.22 9612-9049-06 106.55 40 41/38 x 1.5 82.0 45.0 65.09612-9048-77 86.02 9612-9049-07 116.32 50 53/50 x 1.5 94.0 45.0 77.09612-9048-78 110.46 9612-9049-08 147.60 65 70/66 x 2.0 113.0 54.0 95.09612-9048-79 131.96 9612-9049-09 178.88 80 85/81 x 2.0 133.0 58.0 112.09612-9048-80 170.09 9612-9049-10 225.80 100 104/100 x 2.0 159.0 58.0 137.0

1.7.187

Aseptic Flange Connections DIN 11864-2 Tri-Clover® UltraPure, Series A/DIN

1.7

Product code: 5052According to DIN 11864-2 form A with O-ring

Material: 1.4435 (316L)

Item No.RCPL

EUR

Size

DNDimension (mm)

H4o mm A B CBlind flange. For flange without

O-ring groove9612-9049-11 97.75 10 54.0 11.5 37.09612-9049-12 103.50 15 59.0 11.5 42.09612-9049-13 104.65 20 64.0 11.5 47.09612-9049-14 108.10 25 70.0 11.5 53.09612-9049-15 113.85 32 76.0 11.5 59.09612-9049-16 121.90 40 82.0 11.5 65.09612-9049-17 128.80 50 94.0 11.5 77.09612-9049-18 147.20 65 113.0 11.5 95.09612-9049-19 173.65 80 133.0 13.5 112.09612-9049-20 211.60 100 159.0 15.5 137.0

Blind flange. For flange with O-ring groove9612-9049-21 92.00 10 54.0 11.5 37.09612-9049-22 97.75 15 59.0 11.5 42.09612-9049-23 101.20 20 64.0 11.5 47.09612-9049-24 104.65 25 70.0 11.5 53.09612-9049-25 108.10 32 76.0 11.5 59.09612-9049-26 113.85 40 82.0 11.5 65.09612-9049-27 136.85 50 94.0 11.5 77.09612-9049-28 167.90 65 113.0 11.5 95.09612-9049-29 203.55 80 133.0 13.5 112.09612-9049-30 238.05 100 159.0 15.5 137.0

Item No.RCPL

EURItem No.

RCPL

EUR

Size

DNDimension (mm)

Product code: 5054EPDM FPM mm B D Seal ring for DIN 11864

9612-9062-01 7.91 9612-9062-11 14.15 10 3.5 12.09612-9062-02 7.91 9612-9062-12 14.15 15 3.5 18.09612-9062-03 7.91 9612-9062-13 15.64 20 3.5 22.09612-9062-04 9.50 9612-9062-14 15.64 25 3.5 28.09612-9062-05 11.10 9612-9062-15 22.31 32 5.0 34.09612-9062-06 9.50 9612-9062-16 15.64 40 5.0 40.09612-9062-07 9.50 9612-9062-17 17.37 50 5.0 52.09612-9062-08 9.50 9612-9062-18 18.98 65 5.0 68.09612-9062-09 15.64 9612-9062-19 28.52 80 5.0 83.09612-9062-10 15.64 9612-9062-20 30.25 100 5.0 102.0

Item No.RCPL

EUR

Flange size

DIN/DNNuts Screws

Product code: 50541.4301 (304) mm Screws and nut set

9612-9051-61 3.17 10 - 50 4 x M8 x 30 4 x M89612-9051-62 4.73 65 8 x M8 x 30 8 x M89612-9051-64 9.50 80 8 x M10 x 35 8 x M109612-9051-65 9.50 100 8 x M10 x 40 8 x M10


1.7.188

Tri-Clover® UltraPure, Series A/DIN End Caps/ Blanks

1.7

Sealing System according to DIN 11864-3 form A with O-ringProduct code: 1.4301 (304): 5049Product code: EPDM, FPM: 5052

Material: 1.4435 (316L)

Item No.RCPL

EUR

Size

DNDimension (mm)

H4o mm A BClamp end cap for clamp

liner with O-ring groove9612-9050-61 73.60 10 34.0 11.59612-9050-62 77.05 15 34.0 11.59612-9050-63 86.25 20 50.5 11.59612-9050-64 86.25 25 50.5 11.59612-9050-65 90.85 32 50.5 11.59612-9050-66 104.65 40 64.0 11.59612-9050-67 110.40 50 77.5 11.59612-9050-68 131.10 65 91.0 11.59612-9050-69 167.90 80 106.0 13.59612-9050-70 200.10 100 130.0 15.5

Clamp end cap for clamp liner without O-ring groove9612-9050-71 67.85 10 34.0 10.09612-9050-72 73.60 15 34.0 10.09612-9050-73 79.35 20 50.5 10.09612-9050-74 80.50 25 50.5 10.09612-9050-75 86.25 32 50.5 10.09612-9050-76 97.75 40 64.0 10.09612-9050-77 108.10 50 77.5 10.09612-9050-78 128.80 65 91.0 10.09612-9050-79 165.60 80 106.0 12.09612-9050-80 192.05 100 130.0 14.0


1.7.189

Aseptic Clamp Union Parts DIN 11864-3 Tri-Clover® UltraPure, Series A/DIN

1.7

Sealing System according to DIN 11864-3 form A with O-ringProduct code: 5052

Material: 1.4435 (316L)

Item No.RCPL

EURItem No.

RCPL

EUR

Size

DNDimension (mm)

H3o H4o mm OD/ID x t A BClamp liner with O-ring

groove9612-9050-21 44.38 9612-9050-41 59.63 10 13/10 x 1.5 34.0 39.59612-9050-22 40.18 9612-9050-42 53.76 15 19/16 x 1.5 34.0 39.59612-9050-23 36.27 9612-9050-43 50.83 20 23/20 x 1.5 50.5 39.59612-9050-24 39.10 9612-9050-44 50.83 25 29/26 x 1.5 50.5 40.09612-9050-25 45.85 9612-9050-45 62.56 32 35/32 x 1.5 50.5 45.59612-9050-26 50.83 9612-9050-46 68.43 40 41/38 x 1.5 64.0 45.59612-9050-27 62.56 9612-9050-47 81.13 50 53/50 x 1.5 77.5 46.09612-9050-28 88.95 9612-9050-48 117.30 65 70/66 x 2.0 91.0 58.09612-9050-29 122.19 9612-9050-49 163.24 80 85/81 x 2.0 106.0 60.09612-9050-30 130.99 9612-9050-50 174.00 100 104/100 x 2.0 130.0 61.5

Clamp liner without O-ring groove9612-9050-31 40.18 9612-9050-51 53.76 10 13/10 x 1.5 34.0 38.09612-9050-32 35.10 9612-9050-52 45.85 15 19/16 x 1.5 34.0 38.09612-9050-33 35.10 9612-9050-53 45.85 20 23/20 x 1.5 50.5 38.09612-9050-34 35.10 9612-9050-54 47.12 25 29/26 x 1.5 50.5 38.59612-9050-35 53.76 9612-9050-55 73.31 32 35/32 x 1.5 50.5 44.09612-9050-36 48.48 9612-9050-56 62.56 40 41/38 x 1.5 64.0 44.09612-9050-37 55.72 9612-9050-57 76.25 50 53/50 x 1.5 77.5 44.59612-9050-38 79.18 9612-9050-58 107.53 65 70/66 x 2.0 91.0 56.59612-9050-39 111.44 9612-9050-59 147.60 80 85/81 x 2.0 106.0 58.59612-9050-40 121.21 9612-9050-60 162.27 100 104/100 x 2.0 130.0 60.0

1.7.190

Tri-Clover® UltraPure, Series A/DIN Aseptic Clamp Union Parts DIN 11864-3

1.7

Sealing System according to DIN 11864-3 form A with O-ringProduct code: 1.4301 (304): 5049Product code: EPDM, FPM: 5052

Clamp: 1.4301 (304)

Material

Item No.

RCPL

EUR

Size

DNDimension (mm)

1.4301 (304) mm A B C A13MHM Clamp ring211053 21.76 20 90.9 63.8 54.0211053 21.76 25 90.9 63.8 54.0211053 21.76 32 90.9 63.8 54.0211054 25.78 40 103.9 77.4 67.1211055 31.63 50 117.6 90.4 81.0211056 35.84 65 130.9 103.6 94.5

Clamp ring9611-99-3113 42.14 10 69.0 43.0 37.09611-99-3113 42.14 15 69.0 43.0 37.09611-99-3114 46.61 80 141.0 113.0 109.0

13MHHM Clamp ring212195 41.55 25-32 54.0212196 50.53 40 67.5212197 59.50 50 81.0212198 66.48 65 94.5212199 77.45 100 122.6


Item No.RCPL

EURItem No.

RCPL

EUR

Size

DNDimension (mm)

EPDM FPM mm B D Seal ring for DIN 118649612-9062-01 7.91 9612-9062-11 14.15 10 3.5 12.09612-9062-02 7.91 9612-9062-12 14.15 15 3.5 18.09612-9062-03 7.91 9612-9062-13 15.64 20 3.5 22.09612-9062-04 9.50 9612-9062-14 15.64 25 3.5 28.09612-9062-05 11.10 9612-9062-15 22.31 32 5.0 34.09612-9062-06 9.50 9612-9062-16 15.64 40 5.0 40.09612-9062-07 9.50 9612-9062-17 17.37 50 5.0 52.09612-9062-08 9.50 9612-9062-18 18.98 65 5.0 68.09612-9062-09 15.64 9612-9062-19 28.52 80 5.0 83.09612-9062-10 15.64 9612-9062-20 30.25 100 5.0 102.0

1.7.191

Clamp Connections (DIN 32676) Tri-Clover® UltraPure, Series A/DIN

1.7

According to DIN 32676Product code: H3: 5052

Material: 1.4435 (316L)

Item No.RCPL

EURItem No.

RCPL

EUR

Size

DNDimension (mm)

H3o H4o mm OD/ID x t A B L Clamp ferrule9612-9228-31 35.10 9612-9228-81 49.85 10 13/10 x 1.5 34.0 28.6 23.09612-9228-32 30.99 9612-9228-82 43.01 15 19/16 x 1.5 34.0 28.6 24.09612-9228-33 29.72 9612-9228-83 40.18 20 23/20 x 1.5 34.0 28.6 25.09612-9228-34 29.72 9612-9228-84 41.74 25 29/26 x 1.5 50.5 36.0 30.09612-9228-35 43.01 9612-9228-85 59.63 32 35/32 x 1.5 50.5 36.0 32.09612-9228-36 43.01 9612-9228-86 57.67 40 41/38 x 1.5 50.5 36.0 33.09612-9228-37 50.83 9612-9228-87 68.43 50 53/50 x 1.5 64.0 36.0 33.09612-9228-38 75.27 9612-9228-88 99.71 65 70/66 x 2.0 91.0 48.0 42.09612-9228-39 106.55 9612-9228-89 140.76 80 85/81 x 2.0 106.0 48.0 42.09612-9228-40 113.39 9612-9228-90 154.45 100 104/100 x 2.0 119.0 48.0 44.0

LTD 320-031_1

Clamp ferrule short9612-9915-66 27.47 9612-9915-76 28.15 10 13/10 x 1.5 34.0 18.0 8.09612-9915-67 27.47 9612-9915-77 28.15 15 19/16 x 1.5 34.0 18.0 10.09612-9915-68 27.47 9612-9915-78 28.15 20 23/20 x 1.5 34.0 18.0 11.09612-9915-69 23.95 9612-9915-79 24.54 25 29/26 x 1.5 50.5 21.5 12.09612-9915-70 34.31 9612-9915-80 35.19 32 35/32 x 1.5 50.5 21.5 13.09612-9915-71 25.02 9612-9915-81 25.71 40 41/38 x 1.5 50.5 21.5 15.09612-9915-72 26.89 9612-9915-82 27.47 50 53/50 x 1.5 64.0 21.5 14.09612-9915-73 37.93 9612-9915-83 38.51 65 70/66 x 2.0 91.0 28.0 18.09612-9915-74 65.49 9612-9915-84 66.47 80 85/81 x 2.0 106.0 28.0 18.09612-9915-75 94.82 9612-9915-85 95.80 100 104/100 x 2.0 119.0 28.0 20.0

TD 320-034_1

L

HE4o mm OD/ID x t A B L Clamp ferrule9613-4125-01 79.18 10 13/10 x 1.5 34.0 28.6 23.09613-4125-02 79.18 15 19/16 x 1.5 34.0 28.6 24.09613-4125-03 86.02 20 23/20 x 1.5 34.0 28.6 25.09613-4125-04 74.29 25 29/26 x 1.5 50.5 36.0 30.09613-4125-05 77.22 32 35/32 x 1.5 50.5 36.0 32.09613-4125-06 77.22 40 41/38 x 1.5 50.5 36.0 33.09613-4125-07 92.86 50 53/50 x 1.5 64.0 36.0 33.09613-4125-08 138.81 65 70/66 x 2.0 91.0 48.0 42.09613-4125-09 160.31 80 85/81 x 2.0 106.0 48.0 42.09613-4125-10 203.32 100 104/100 x 2.0 119.0 48.0 42.0

LTD 320-031_1

Clamp ferrule short9613-4126-01 66.47 10 13/10 x 1.5 34.0 18.0 8.09613-4126-02 66.47 15 19/16 x 1.5 34.0 18.0 10.09613-4126-03 66.47 20 23/20 x 1.5 34.0 18.0 11.09613-4126-04 54.74 25 29/26 x 1.5 50.5 21.5 12.09613-4126-05 63.54 32 35/32 x 1.5 50.5 21.5 13.09613-4126-06 55.72 40 41/38 x 1.5 50.5 21.5 15.09613-4126-07 56.70 50 53/50 x 1.5 64.0 21.5 14.09613-4126-08 87.00 65 70/66 x 2.0 91.0 28.0 18.09613-4126-09 110.46 80 85/81 x 2.0 106.0 28.0 18.09613-4126-10 134.90 100 104/100 x 2.0 119.0 28.0 20.0

TD 320-034_1

L

Sealings - please see later this chapter.

1.7.192

Tri-Clover® UltraPure, Series A/DIN Clamp Connections (DIN 32676)

1.7

According to DIN 32676Product code: H3: 5052

Material: 1.4404 (316L)

Item No.RCPL

EURItem No.

RCPL

EUR

Size

DNDimension (mm)

HE4o H4o mm A B End cap9613-4444-10 46.17 9613-4444-02 11.60 10 34.0 6.359613-4444-10 46.17 9613-4444-02 11.60 15 34.0 6.359613-4444-10 46.17 9613-4444-02 11.60 20 34.0 6.359613-4444-11 79.35 9613-4444-03 22.40 25 50.5 6.359613-4444-11 79.35 9613-4444-03 22.40 32 50.5 6.359613-4444-11 79.35 9613-4444-03 22.40 40 50.5 6.359613-4444-12 83.95 9613-4444-04 25.24 50 64.0 6.359613-4444-14 133.40 9613-4444-06 42.39 65 91.0 6.359613-4444-15 141.45 9613-4444-07 52.55 80 106.0 6.359613-4444-16 87.92 9613-4444-08 36.65 100 119.0 6.35

Sealings - please see later this chapter.

1.7.193

Clamps and Seal rings Tri-Clover® UltraPure, Series A/DIN

1.7

Product code clamps: 5049Product code seal rings: 5045

Material: 1.4301 (304)

Material

Item No.

RCPL

EUR

Size

DNDimension (mm)

mm A B C A13MHM Clamp ring211053 21.76 25 90.9 63.8 54.0211053 21.76 32 90.9 63.8 54.0211053 21.76 40 90.9 63.8 54.0211054 25.78 50 103.9 77.4 67.1211056 35.84 65 130.9 103.6 94.5211057 40.04 100 159.5 132.6 122.2

Clamp ring9611-99-3113 42.14 10 69.0 43.0 37.09611-99-3113 42.14 15 69.0 43.0 37.09611-99-3113 42.14 20 69.0 43.0 37.09611-99-3114 46.61 80 141.0 113.0 109.0

Item No.RCPL

EUR

Size

DNDimension (mm)

mm A 13MHHM Clamp ring212195 41.55 25-32 54.0212196 50.53 40 67.5212197 59.50 50 81.0212198 66.48 65 94.5212199 77.45 100 122.6

Item No.RCPL

EURItem No.

RCPL

EURItem No.

RCPL

EUR

Size

DNDimension (mm)

EPDM FPM PTFE mm A B D Seal ring for clamp9613-4700-01 6.58 9611-99-4182 17.37 9612-9915-86 24.73 10 36.2 5.5 10.29613-4700-02 5.43 9611-99-4183 17.37 9612-9915-87 24.73 15 36.2 5.5 16.29613-4700-03 5.68 9611-99-4184 17.37 9612-9915-88 24.73 20 36.2 5.5 20.29613-4700-04 1.89 9611-99-4185 18.98 9612-9915-89 33.12 25 52.7 5.5 26.29613-4700-05 2.78 9611-99-4186 18.98 9612-9915-90 33.12 32 52.7 5.5 32.29613-4700-06 1.89 9611-99-4187 20.59 9612-9915-91 33.12 40 52.7 5.5 38.29613-4700-07 2.28 9611-99-4188 22.31 9612-9915-92 38.87 50 66.2 5.5 50.29613-4700-08 3.28 9611-99-4189 25.53 9612-9915-93 46.81 65 93.2 5.5 66.29613-4700-09 4.04 9611-99-4190 31.74 9612-9915-94 56.35 80 108.2 5.5 81.29613-4700-10 5.31 9611-99-4191 34.96 9612-9915-95 64.40 100 121.2 5.5 100.2

B


1.7.194

1.10 Installation accessories

Tube support systems and tools makes our installation material package complete.

Ordering LeafletsTube Holders ISO 2037 tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.10.232Tube Holders DIN11850 tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.10.235Tube Support System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.10.237Tools for Unions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.10.242Tools for Tubing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.10.243End Caps & Mounting Plates ISO 2037 tubes . . . . . . . . . . . . . . . . . . . . . . .1.10.244

Tube Holders ISO 2037 tubes Installation accessories

1.10

Product code: 5082 Tube: ISO

Material

Item No.

RCPL

EUR

Size

DNDimension (mm)

1.4301 (304) mm A B C (BSP) DTube holder with welding

attachment9611-85-025-0 13.16 25 49.0 34.99611-85-025-1 13.60 38 62.0 41.49611-85-025-2 13.79 51 75.0 47.99611-85-025-3 14.48 63.5 87.6 54.29611-85-025-4 14.55 76.1 100.0 60.59611-85-025-5 15.05 101.6 125.6 73.4

Tube holder without welding attachment9612-4832-01 8.22 25 49.0 14.99612-4832-02 8.41 38 62.0 21.49612-4832-03 8.79 51 75.0 27.99612-4832-04 9.17 63.5 87.6 34.29612-4832-05 10.25 76.1 100.0 40.59612-4832-06 9.49 101.6 125.6 53.4

Material

Item No.

RCPL

EUR

Size

DNDimension (mm)

1.4301 (304) mm A B C D Tube holder, open9612-9283-18 5.42 25 51.5 25.09612-9283-19 5.42 38 51.5 38.09612-9283-20 5.76 51 51.5 51.09612-9283-21 6.17 63.5 51.5 63.59612-9283-22 6.17 76.1 51.5 76.19612-9283-23 7.46 101.6 70.0 101.6


1.10.232

Installation accessories Tube Holders ISO 2037 tubes

1.10

Product code: 5082 Tube: ISOMaterial: 1.4301 (304)

Item No.RCPL

EUR

Size

DNDimension (mm)

A B C ELoose mm Tube holder with short shaft9612-4111-07 9.42 25 80.0 27.0 90.0 21.39612-4111-08 9.99 38 93.0 40.0 90.0 21.39612-4111-09 10.56 51 106.0 53.0 90.0 21.39612-4111-10 11.13 63.5 118.0 65.5 90.0 21.39612-4111-11 12.08 76 132.0 78.0 90.0 21.39612-4111-12 13.16 101.6 157.0 104.0 90.0 21.3

Tight Tube holder with short shaft9612-4111-01 9.42 25 78.0 24.0 90.0 21.39612-4111-02 9.99 38 91.0 38.1 90.0 21.39612-4111-03 10.56 51 104.0 51.0 90.0 21.39612-4111-04 11.07 63.5 116.0 63.5 90.0 21.39612-4111-05 12.02 76 129.0 76.2 90.0 21.39612-4111-06 13.16 101.6 155.0 101.6 90.0 21.3

Loose Tube holder with long shaft9612-4111-19 12.78 25 80.0 27.0 150.0 21.39612-4111-20 10.37 38 93.0 40.0 150.0 21.39612-4111-21 11.13 51 106.0 53.0 150.0 21.39612-4111-22 11.64 63.5 118.0 65.5 150.0 21.39612-4111-23 16.26 76 132.0 78.0 150.0 21.39612-4111-24 13.66 101.6 157.0 104.0 150.0 21.3

Tight Tube holder with long shaft9612-4111-13 12.02 25 78.0 25.4 150.0 21.39612-4111-14 12.46 38 91.0 38.1 150.0 21.39612-4111-15 13.35 51 104.0 51.0 150.0 21.39612-4111-16 11.64 63.5 116.0 63.5 150.0 21.39612-4111-17 15.05 76 129.0 76.2 150.0 21.39612-4111-18 17.77 101.6 155.0 101.6 150.0 21.3

Tight Tube holder - with short shaft9612-9910-05 11.51 101.0 48.3 90.0 21.39612-9910-06 12.97 113.0 60.3 90.0 21.39612-9910-07 14.48 143.0 88.9 90.0 21.39612-9910-08 16.26 167.0 114.0 95.0 21.3


1.10.233

Tube Holders ISO 2037 tubes Installation accessories

1.10

Hinged Hex pipe holdersProduct code: 5082

Tube: ISOMaterial: 1.4301 (304)

Material

Item No.

RCPL

EUR

Size

DNDimension (mm)

mm A B C DHXO, 2 piece saddle HEX

- No Attachment9612-9282-25 3.55 25 25.0 15.09612-9282-26 3.78 38 38.0 21.59612-9282-27 3.81 51 51.0 28.09612-9282-28 4.38 63.5 63.5 34.59612-9282-29 4.76 76 76.0 40.59612-9282-30 5.22 104 104.0 54.5

HKO, hinged HEX - No Attachment9612-9282-13 3.34 25 25.0 15.09612-9282-14 3.42 38 38.0 21.59612-9282-15 3.59 51 51.0 28.09612-9282-16 4.14 63.5 63.5 34.59612-9282-17 4.32 76 76.0 40.59612-9282-18 5.13 104 104.0 54.5

HKB, hinged HEX9612-9282-19 4.95 25 25.0 100.0 10.09612-9282-20 5.05 38 38.0 100.0 10.09612-9282-21 5.22 51 51.0 100.0 12.09612-9282-22 5.84 63.5 63.5 100.0 12.09612-9282-23 6.19 76 76.0 100.0 12.09612-9282-24 6.51 104 104.0 100.0 14.0


1.10.234

Installation accessories Tube Holders DIN11850 tubes

1.10

Product code: 5082 Tube: DINMaterial: 1.4301 (304)

Finish

Item No.

RCPL

EUR

Finish

Item No.

RCPL

EUR

Size

DNDimension (mm)

Semi bright Mat mm B C D Tube holder with shaft9611-98-070-0 6.89 9611-98-070-1 6.89 10 62.5 12.0 8.09611-98-071-0 7.34 9611-98-071-1 6.89 15 65.5 18.0 8.09611-98-113-2 6.89 9611-98-113-1 6.89 20 68.5 22.0 8.09611-98-072-0 6.83 9611-98-072-1 6.83 25 71.5 28.0 10.09611-98-073-0 7.08 9611-98-073-1 7.08 32 74.5 34.0 10.09611-98-074-0 7.34 9611-98-074-1 7.34 40 77.5 40.0 10.09611-98-075-0 8.35 9611-98-075-1 8.35 50 83.5 52.0 12.09611-98-076-0 9.42 9611-98-076-1 9.42 65 92.5 70.0 12.09611-98-078-0 11.13 9611-98-078-1 11.13 80 100 85.0 12.09611-98-079-0 12.52 9611-98-079-1 12.52 100 109.5 104.0 12.09611-98-080-0 36.05 9611-98-080-1 36.05 125 140.5 129.0 16.09611-98-081-0 49.97 9611-98-081-1 49.97 150 179.5 154.0 16.0

Tube holder without shaft9611-98-115-2 4.81 9611-98-115-1 4.81 10 12.09611-98-116-2 4.81 9611-98-116-1 4.81 15 18.09611-98-117-2 4.81 9611-98-117-1 4.81 20 22.09611-98-118-2 3.92 9611-98-118-1 3.92 25 28.09611-98-119-2 4.68 9611-98-119-1 4.68 32 34.09611-98-120-2 4.54 9611-98-120-1 4.54 40 40.09611-98-121-2 5.43 9611-98-121-1 5.43 50 52.09611-98-122-2 5.81 9611-98-122-1 5.81 65 70.09611-98-123-2 7.91 9611-98-123-1 7.91 80 85.09611-98-124-2 9.99 9611-98-124-1 9.99 100 104.09611-98-125-2 29.47 9611-98-125-1 28.02 125 129.09611-98-126-2 39.22 9611-98-126-1 39.22 150 154.0


1.10.235

Tube Holders DIN11850 tubes Installation accessories

1.10

Product code: 5082 Tube: DINMaterial: 1.4301 (304)

Dimension (mm)Item No.

RCPL

EUR

Size

DN A B C D ETight mm Tube holder without shaft

9612-4110-81 8.92 10 60.0 11.09612-4110-82 8.92 15 65.0 15.99612-4110-51 8.92 20 72.0 23.09612-4110-52 8.92 25 80.0 29.09612-4110-83 9.17 32 85.0 32.09612-4110-84 9.43 40 93.0 40.09612-4110-55 10.18 50 107.0 53.09612-4110-56 11.13 65 123.0 70.09612-4110-57 12.46 80 137.0 85.09612-4110-58 12.59 100 157.0 104.09612-4110-59 19.35 125 182.0 129.09612-4110-60 20.18 150 207.0 154.0

Loose Tube holder with short shaft9612-4110-77 8.54 10 62.0 12.0 50.0 8.09612-4110-78 8.54 15 67.0 18.0 50.0 8.09612-4110-15 7.80 20 74.0 25.0 90.0 21.39612-4110-16 9.42 25 82.0 30.0 90.0 21.39612-4110-79 9.68 32 87.0 34.0 90.0 21.39612-4110-80 9.99 40 95.0 42.0 90.0 21.39612-4110-19 10.56 50 109.0 54.0 90.0 21.39612-4110-20 14.48 65 125.0 72.0 90.0 21.39612-4110-21 12.97 80 139.0 87.0 90.0 21.39612-4110-22 13.16 100 159.0 106.0 50.0 21.39612-4110-23 19.86 125 184.0 131.0 50.0 21.39612-4110-24 20.56 150 209.0 156.0 50.0 21.3

Tight Tube holder with short shaft9612-4110-73 8.54 10 60.0 11.0 50.0 8.09612-4110-74 10.37 15 65.0 15.9 50.0 8.09612-4110-03 11.95 20 72.0 23.0 90.0 21.39612-4110-04 12.08 25 80.0 29.0 90.0 21.39612-4110-75 13.10 32 85.0 32.0 90.0 21.39612-4110-76 12.78 40 93.0 40.0 90.0 21.39612-4110-07 15.12 50 107.0 53.0 90.0 21.39612-4110-08 18.53 65 123.0 70.0 90.0 21.39612-4110-09 15.81 80 137.0 85.0 90.0 21.39612-4110-10 10.37 100 157.0 104.0 50.0 21.39612-4110-11 29.73 125 182.0 129.0 50.0 21.39612-4110-12 30.61 150 207.0 154.0 50.0 21.3


1.10.236

Installation accessories Tube Support System

1.10

Supports systemProduct code: 5118, 5084

Material

Item No.

RCPL

EUR

Size

DNDimension (mm)

1.4301 (304) mm A B C Square tubeProduct code: 51189611-83-1486 * 15 15 1.59611-83-1488 * 20 20 2.09611-83-1493 * 25 25 2.09611-83-1490 * 30 30 2.09611-83-1496 * 35 35 2.09611-83-1501 * 40 40 1.59611-83-1504 * 40 40 2.09611-83-1507 * 45 45 2.09611-83-1513 * 50 50 2.09611-83-1381 * 50 50 3.09611-83-1382 * 60 60 2.09611-83-1383 * 60 60 3.09611-83-1384 * 80 80 2.09611-83-1573 * 80 80 3.09611-83-1386 * 100 100 2.09611-83-1387 * 100 100 3.09611-83-1388 * 100 100 4.09611-83-1441 * 120 120 3.09611-83-1442 * 120 120 4.0

TD 320-043

1.4301 (304) A B C Rectangular tubeProduct code: 51189611-83-1389 * 30 20 2.09611-83-1390 * 40 20 2.09611-83-1391 * 50 30 2.09611-83-1527 * 60 40 2.09611-83-1393 * 80 40 2.09611-83-1565 * 80 40 3.09611-83-1570 * 80 60 3.09611-83-1455 * 100 40 3.09611-83-1396 * 100 50 2.09611-83-1397 * 100 50 3.09611-83-1398 * 100 60 2.09611-83-1460 * 120 40 3.09611-83-1461 * 120 60 3.0


All tubes are in lengths of 6 meters .

1.10.237

Tube Support System Installation accessories

1.10


Material

Item No.

RCPL

EUR

Size

DNDimension (mm)

1.4301 (304) A B Flat steelProduct code: 51189611-83-1401 * 20 39611-83-1402 * 20 59611-83-1403 * 25 39611-83-1404 * 25 59611-83-1405 * 25 69611-83-1406 * 30 39611-83-1407 * 30 59611-83-1408 * 30 69611-83-1409 * 30 89611-83-1410 * 30 109611-83-1411 * 35 59611-83-1412 * 35 69611-83-1413 * 35 109611-83-1414 * 40 49611-83-1415 * 40 59611-83-1416 * 40 69611-83-1417 * 40 89611-83-1418 * 50 59611-83-1419 * 50 69611-83-1420 * 50 89611-83-1421 * 60 59611-83-1422 * 60 69611-83-1423 * 60 89611-83-1424 * 80 59611-83-1425 * 80 69611-83-1426 * 80 89611-83-1427 * 80 109611-83-1428 * 100 69611-83-1429 * 100 89611-83-1430 * 100 101.4301 (304) A B Angle steel

Product code: 51189611-83-1431 * 20 39611-83-1432 * 25 39611-83-1433 * 30 39611-83-1434 * 35 49611-83-1435 * 40 49611-83-1436 * 50 59611-83-1437 * 60 69611-83-1438 * 70 79611-83-1439 * 80 8

TD 320-044

Product code: 5084 Stud bolt9611-85-072-0 5.40 110.0 M12


All tubes are in lengths of 6 meters .

1.10.238


1.10

Supports systemProduct code: 5084

Material

Item No.

RCPL

EURDimension (mm)

1.4301 (304) A B Floor plate9611-85-066-0 15.53 150.0 40.0

Wall plate, ceiling plate9611-85-073-0 15.76 150.0 40.0

Wall plate, ceiling plate9611-85-074-0 15.87 150.0 9.0

Wall plate, ceiling plate9612-5158-01 36.23 150.0 154.0

1.10.239

Tube Support System Installation accessories

1.10

Supports systemProduct code: 5084

Material

Item No.

RCPL

EURDimension (mm)

A B C D E Wall plate9611-88-0370 20.24 60.0 120.0 80.0 6.0 13.5

Connection piece ALO9611-85-052-0 8.34 80.0 36.5 M12 15.0

Fastening of connection piece9611-99-1157 3.80 80.0 M12

Expanding bolt9611-99-0585 1.85 55.0 M12 x 55

Bolt for T-connection9611-99-0586 1.96 80.0 M12 x 80

Nut and washer9611-99-0587 0.81 M129611-99-0588 0.85 M12

1.10.240


1.10


Material

Item No.

RCPL

EUR

Size

DNDimension (mm)

1.4301 (304) mm A B C D E F Floor socketProduct code: 50869612-9283-05 16.16 25 101.6 35.0 6.0 50.8 1.5 25.09612-9283-06 17.60 38 101.6 35.0 6.0 50.8 1.5 38.09612-9283-07 18.40 51 101.6 35.0 6.0 50.8 1.5 51.09612-9283-08 18.98 63.5 101.6 35.0 6.0 50.8 1.5 63.59612-9283-09 19.78 76 101.6 35.0 6.0 50.8 1.5 76.0

Material

Item No.

RCPL

EUR

Size

DN1.4301 (304) mm Strap

Product code: 50849611-99-0589 2.87 259611-99-0590 3.09 389611-99-0591 3.33 519611-99-0592 3.56 63.59611-99-0593 3.67 76.19611-99-0594 5.29 101.6

Product code: 5086 Flexible screw driver9611-98-040-0 20.59

Material

Item No.

RCPL

EUR

Size

DNDimension (mm)

Product code: 5084 A B C Tube holder9611-85-0530 5.98 25 40.5 25.0 12.79611-85-0531 5.98 38 40.5 35.0 19.39611-85-0532 6.44 51 40.5 35.0 25.69611-85-0533 6.90 63.5 40.5 35.0 32.09611-85-0534 6.96 76.1 40.5 35.0 38.49611-85-0535 7.59 101.6 40.5 35.0 51.2

1.10.241

Tools for Unions Installation accessories

1.10

Union spannersProduct code: 5086

Material

Item No.

RCPL

EUR

Material

Item No.

RCPL

EUR

Size

DNDimension (mm)

For nut diam.Zink plated steel Light alloy mm A

from toSpanners for SMS and

DS round nuts9611-98-0118 12.13 25 58.0 62.09611-98-0119 12.88 38 68.0 75.09611-98-0120 15.07 51 80.0 90.09611-98-0123 18.75 63.5 95.0 100.09611-98-0121 23.17 76.1 110.0 115.09611-98-0125 31.05 101.6 155.0 165.0

Spanners for IDF round nuts9611-98-0117 13.17 25 45.0 50.09611-98-0118 12.13 38 58.0 62.09611-98-0119 12.88 51 68.0 75.09611-98-0120 15.07 63.5 80.0 90.09611-98-0121 23.17 76.1 110.0 115.09611-98-0126 36.23 101.6 135.0 145.0

Spanner, hexagon nuts - IDF/ISO9611-98-0111 28.41 25 47.09611-98-0112 29.90 38 62.09611-98-0113 31.63 51 77.09611-98-0114 32.78 63.5 92.09611-98-0115 33.93 76.1 108.09611-98-0127 68.43 101.6 135.5

Universal spanners for round nuts31317-0935-1 19.55 25-76.1

Spanners for RJT (BS) hexagon nuts9611-98-0140 28.41 25 52.09611-98-0141 29.90 38 66.09611-98-0142 31.63 51 80.09611-98-0114 32.78 63.5 92.09611-98-112-1 33.93 76.1 106.0

Material

Item No.

RCPL

EUR

Size

DNDimension (mm)

For nut diam.1.4301 (304) mm

from toUniversal spanner for ISO/DIN

69696 51.75 25-76 DIN 20-65

Spanners for DIN9611-98-0118 12.13 25 58.0 62.09611-98-0119 12.88 40 68.0 75.09611-98-0120 15.07 50 80.0 90.09611-98-0121 23.17 65 110.0 115.09611-98-0124 26.05 80 120.0 125.09611-98-0126 36.23 100 135.0 145.0

"C" spanners for DIN9611-90-1027 20.70 10-20 35.0 60.09611-90-1028 23.58 25-40 60.0 90.09611-90-1029 35.65 50-100 90.0 155.09611-90-1030 47.73 125-150 155.0 230.0

1.10.242

Installation accessories Tools for Tubing

1.10

Product code: 5086

Item No.RCPL


SteelDN

mm

DN

mmMax. thickness of saw blades Cutting device, ISO

9611-98-107-0 99.48 25 1.49611-98-107-1 102.35 38 1.59611-98-107-2 108.10 51 1.69611-98-107-3 157.55 63.5 1.79611-98-107-4 170.20 76.1 1.79611-98-107-5 282.90 101.6 1.9

Cutting device, DIN9611-98-1080 117.88 159611-98-1081 117.88 209611-98-1082 121.33 259611-98-1083 121.33 329611-98-1084 128.23 409611-98-1085 113.28 509611-98-1086 224.83 659611-98-1087 290.95 809611-98-1089 366.28 100

1.10.243

End Caps & Mounting Plates ISO 2037 tubes Installation accessories

1.10

Product code: 5086 Tube: ISOSemi bright

Material

Item No.

RCPL

EUR

Material

Item No.

RCPL

EUR

Size

DNDimension (mm)

1.4301 (304) 1.4404 (316L) mm A B C D End cap, ISO9612-4464-01 23.00 25 25.0 21.8 9.09612-4464-02 29.90 38 38.0 34.8 10.09612-4464-03 37.38 51 51.0 47.8 12.09612-4464-04 37.95 63.5 63.5 60.3 14.09612-4464-05 39.10 76 76.0 72.0 17.09612-4464-06 40.25 101.6 101.6 97.6 26.0

End cap, ISO9612-9282-31 12.82 101.6 101.6 35.0 50.8 1.5

1.10.244

Installation accessories End Caps & Mounting Plates ISO 2037 tubes

1.10

Product code: 5086 Tube: DINMat

Material

Item No.

RCPL

EUR

Material

Item No.

RCPL

EUR

Size

DNDimension (mm)

1.4301 (304) 1.4404 (316L) mm A B C End capPolished9611-90-1011 7.71 9611-90-7350 9.49 25 28.0 25.0 11.09611-90-1012 8.28 9611-90-7351 9.66 32 34.0 31.0 14.09611-90-1013 9.32 9611-90-7352 12.08 40 40.0 37.0 14.09611-90-1014 10.47 9611-90-7353 13.23 50 52.0 49.0 17.09611-90-1015 11.10 9611-90-7354 17.48 65 70.0 66.0 22.09611-90-1016 11.44 9611-90-7355 19.84 80 85.0 81.0 24.09611-90-1017 13.74 9611-90-7356 28.23 100 104.0 100.0 28.09611-90-1018 23.58 9611-90-7357 43.70 125 129.0 125.0 33.09611-90-1019 24.55 9611-90-7358 44.85 150 154.0 150.0 38.09611-90-1020 54.63 9611-90-7359 100.63 200 204.0 200.0 47.09611-90-1021 130.53 9611-90-7360 240.82 250 254.0 250.0 50.0

End capMatt9611-90-1000 7.71 25 28.0 25.0 11.09611-90-1001 8.28 32 34.0 31.0 14.09611-90-1002 9.32 40 40.0 37.0 14.09611-90-1003 10.47 50 52.0 49.0 17.09611-90-1004 11.10 65 70.0 66.0 22.09611-90-1005 11.44 80 85.0 81.0 24.09611-90-1006 13.74 100 104.0 100.0 28.09611-90-1007 23.58 125 129.0 125.0 33.09611-90-1008 24.55 150 154.0 150.0 38.09611-90-1009 55.20 200 204.0 200.0 47.09611-90-1010 131.09 250 254.0 250.0 50.0

Mounting plate31801-5391-1 11.79 120.0 5.031801-5391-2 27.31 160.0 8.0

1.10.245

Tubes and fittingsTubes and fi ttings 2010

Omslag utside.indd 1Omslag utside.indd 1 11.11.10 12.0511.11.10 12.05

Tubes and fittings

Documents

Transcript of Tubes and fittings