SALE - KBC Tools & Machinery
-
Upload
khangminh22 -
Category
Documents
-
view
2 -
download
0
Transcript of SALE - KBC Tools & Machinery
KBCTools.comWEB:
1-800-521-1740PHONE:
1-800-322-4292FAX:
SALE
Major Credit Cards Accepted:
PHONE HOURS: Mon-Fri. 8am - 8pm, EST / FAX ORDERS 24/7!
IP54 Large Display Electronic Calipers
FEATURES:• Resolution: .0005" (.01mm / 1/128" fractional).• Hardened stainless steel body.• Precision lapped finish for smooth travel.• IP54 - Splash water, oil and dust resistant.• 1 Year Warranty.
Range: 0-6" (0-150mm)Part No. 1-815-100Reg. Net Price $49.95
$3746INCH - METRIC - FRACTIONAL
Range: 0-12" (0-300mm)Part No. 1-815-120Reg. Net Price $108.00
$8100
HDS Digimatic Height Gage with Absolute EncoderSeries 570 - with Output
FEATURES:• Feed wheel.• Can easily measure the height of small parts.• Unlimited response speed.• Absolute encoder for direct measurement from power on.• Easy-to-read, large LCD display, 6 digit & minus sign (-).• Economical energy-saving design.• Functions Include: Zero-Setting (ABS & INC modes),
Presetting (ABS & INC modes), Hold/Data Button, Inch/mm Conversion, Data Output, Error Alarm,
Low Battery Alarm, ON/OFF, Origin.• Battery Life: Approx. 20,000 hrs.
SPECIFICATIONS:Range ......... 0-12" (0-300mm)Resolution .. .0005" (.001mm)Accuracy ................... ±.0015"
Part No. 1-808-570312Reg. Net Price $627.00
$53295
Model SP1007Part No. 1-457-525Reg. Net Price $43.35
$3251
NOGA 007Deburring Set
INCLUDES:• RB Handle (12mm Hex, Aluminum)• OR ("O" Ring Grooves Blade)• TC (Thread Cleaner Blade)• S100 Blade (for Steel)• S150 Blade (for Plastic)• RD 16.5 (RotoDrive Countersink)• RDE 18 (External RotoDrive Countersink)
Deburring, Cleaning,Finishing & Countersink.
6 Pc. 4 Flute Solid CarbideSingle End Mill Set
Designed for slotting, drilling, pocketing, and general purpose milling.
STANDARD LENGTH
CENTER CUTTING
SET INCLUDES:1/8", 3/16", 1/4",5/16", 3/8", 1/2"
Set supplied ina plastic case.
Part No. 1-326-000Reg. Net Price $78.00
$5850
17" x 40" High Precision Engine Lathe
COMPLETE WITH:• Face Plate• Steady Rest & Follow Rest• 4-Way Toolpost• 10" 3-Jaw Chuck• Coolant System with Rear Splash Guard• Toolbox with Tools• Halogen Work Light• Manual and Parts List
SPECIFICATIONS:Spindle Nose/Bore ............ D1-6 Camlock/3.125"Spindle Speeds (12) .................... 36-1,800 RPMThread Range ...... (45) 2-72 TPI, (39) 0.2-14 mm Tailstock Taper/ Spindle Travel ............ 4 MT / 5"Drive Motor .................. 7.5 HP, 230/460V, 3 PHShipping Weight ...................................4,510 lbs.
Model ML-1740TPart No. 6-273-064
$18,45000FINANCE AS LOW AS$416.60/mo.CALL FOR DETAILS
Faster, Easy Smart Search, Product Filtering, Improved Account Tools & More!
All Online Orders up to 50 lbs.*$$11009595 FLAT RATEFLAT RATE
SHIPPINGSHIPPING *Some restrictions may apply.
0-10-1"" Outside Outside MicrometerMicrometer
Coupon Code:MIC319U
with Any Online Order $99.00 or More!
FREEFREEValid 3/1/19 - 4/30/19 Registered Customers Only. One time use.
PLUS
Part No. 1-812-501
A $17.60 A $17.60 Value!Value!
NOW ONLY!
NOW ONLY!
NOW ONLY!
NOW ONLY!
NOW ONLY!
with Chuck Guard & 2-Speed Tailstock
Call: 1-800-521-1740 Fax: 1-800-322-4292 Web: KBCTools.com2
Quick IndexCutting Tools ...................... 1, 3, 4-7, 36 Carbide Tooling ..................... 3, 8-9, 36Fluids ....................................... 2, 32, 36Workholding Tools ............ 10-13, 35-36Abrasives ............................ 1, 14-15, 35Measuring & Inspection ............ 1, 16-21Toolroom Accessories ................. 22-23Hand Tools ................................ 2-3, 33Shop Supplies ................... 3, 30-31, 35Power / Air Tools .......................... 34-35 Machinery ................................. 1, 24-29
GSA Contract #BPA-GS-06F-4KBCT
100% SATISFACTIONGUARANTEED: If you are not 100%satisfied for any reason just return theunused item(s) in its original packaging within30 days, with your receipt for a replacement,exchange, full credit or refund.
DAMAGED, LOST, OR SHORT SHIPMENTS: It doesn’t happen often, but if it does, callyour local courier office immediately, and advise KBC so that we can reship and place a claim. Please keep damaged goods and containers until the claim is closed.
TRUCK SHIPMENTS: KBC is not responsible for merchandise damaged or lost by motor freight carriers. If the shipment is damaged or short one or more packages, please have it noted by the truck driver on receipt and freight bill. If you accept a short or damaged shipment from the truck driver without proper notation by the driver, you do so at your own risk.
PRICING: KBC Tools & Machinery traditionally holdsprices for the duration of its sales flyers. As industrial market conditions continue to change across North America (tariffs, raw material, and price increases), KBC reserves the right to change prices based upon inventory conditions and supplier price increases without notice. BUY NOW! KBC Tools & Machinery strives to be your choice for all your tooling needs.
MINIMUM ORDER: Only $25.00, to cover processing costs.
OOPS!: Errors do occur, so mistakes are subject to correction. Sorry for any inconvenience.
SAT ISFACTION
* Excludes Machinery & Non-Stock Items.
99% of All Orders Ship the Same Day... Or you can Pick Up at your Local Branch.* Your Choice.
Over 860 Pages ofour Best ProductsPLUS thousands of New Items added!
KBC Volume 52Master Catalog
GET ONEGET ONETODAY!TODAY!
To Request a Copy Call 1-800-521-1740 or go to KBCTools.com
Check out the bigred lockers outside our KBC Michigan location.Just order during regular business hours and pick up your order anytime!Your tools... your time.
24/7 All Tools...All The Time.
24/7 PICK-UP LOCKERS
Highly concentrated premium synthetic water soluble coolant formulated to exceed the demands of spray and flood cooling. It contains a non-chlorine extreme pressure additive for improved tool and surface finish. Prevents rusting on tool and surface finish. Contains a broad spectrum biocide/fungicide for protection against growth. Non-toxic, non-flammable, and biodegradable.
ECOLOGICALLY SAFE
TRI-COOLTM TC-1 Premium Synthetic Coolant
1 GallonPart No. 1-439-30656Reg. Net Price $43.45
$3911
5 GallonPart No. 1-439-30657Reg. Net Price $199.75
$17978
Automatic Center Punchw/ Adjustable Stroke
Starrett #818Part No. 1-855-53048Reg. Net Price $38.00 $3230
FEATURES:• No hammer required, just
hold the punch in upright position, press it down, and built-in mechanism strikes a perfect center.
• Lightweight, knurled handle for positive grip & easy handling.
• The force of the blow can be adjusted by turning the knurled cap.
• Length: 5" (125mm), Diameter: 5/8" (16mm)
Rugged, hand impact driver solves the problem of turning rusted, frozen or other stubborn screws. Can also be used on 3/8" square drive impact sockets. Reverses for tightening or loosening screws. Consists of impact driver with 3/8" square drive fitting, adapter for 5/16" hex bits and four assorted hex screwdriver bits (5/16" & 1/2" regular slotted, #2 & #4 Phillips).
Part No. 1-927-70220Reg. Net Price $70.00 $5600
KLEIN TOOLSReversible ImpactDriver Set
Pocket Tapes
1/2" 1/2 3/4 3/4
-30660-30661-30663-30664
$3.193.195.045.04
12’12 (3.5m)16 16 (5m)
EnglishEnglish/Metric
EnglishEnglish/Metric
KTS12-12-NKTS12-12ME-NKTS34-16-NKTS34-16ME-N
Starrett Blade Part No. Reg. Number Length Width Graduation 1-855- Net Price SALE!
$2.872.874.544.54
FEATURES:• Produced of high visibility ABS plastic.• Ergonomic design provides a comfortable fit in the hand.• Positive lock holds the blade firmly in place.
• Steel belt clip.• Blade Graduation Style: English: Graduated in 1/16". English/Metric: Graduated
1/16" and Millimeters.
Major Credit Cards Accepted: 3Industrial Metalworking Tooling & Solutions Since 1965.
RIGHT HANDHIGH SPEED STEELTiN TIPPED118° POINT
Jobbers length drillsare designed to performin a wide variety ofnormal conditions.Jobbers length alsoperform in a broadrange of materialsin both machineand portable drilling.Superhard TITANIUMNITRIDE (TiN) surfacetreatment improves drilllife, chip ejection, andproductivity; decreaseshorsepower requirements.
Titanium Coated Jobbers Drills
3/32" 7/64 1/8 9/64 5/32 11/64 3/16 13/64 7/32 15/64 1/4 17/64 9/32 19/64 5/16 21/64 11/32 23/64 3/8 25/64 13/32 27/64 7/16 29/64 15/32 31/64 1/2
2-1/4"2-5/82-3/42-7/83-1/83-1/43-1/23-5/83-3/43-7/844-1/84-1/4 4-3/84-1/24-5/84-3/4 4-7/855-1/8 5-1/45-3/85-1/25-5/85-3/45-7/8 6
$1.401.491.491.611.651.792.002.172.422.632.803.363.454.014.414.925.416.186.277.287.468.238.599.56
10.1910.6810.71
-006-007-008-009-010-011-012-013-014-015-016-017-018 -019-020-021-022-023-024-025-026-027-028-029-030-031-032
Part No. Reg. Size OAL 1-001TA- Net Price
$1.121.191.191.291.321.431.601.741.932.102.242.692.763.213.533.934.334.945.015.825.966.586.877.648.158.548.57
SALE!
Fractional Sizes
6-Drawer Chest 26" Wide
Model WCH-266BK (Black)Part No. 1-824-235Reg. Net Price $215.45
$18313
SPECIFICATIONS:Top Tray Dimensions .... 25.75" x 11.75" x 2.88"Overall Dimensions ............... 26" x 12" x 15.25"Capacity .................................................. 85 lbs.Weight ..................................................... 43 lbs.Gas struts hold lid open during use.
5-Drawer Cabinet26" Wide
Model WCA-265BKColor: BlackPart No. 1-824-265Reg. NetPrice $360.80
$30668
SPECIFICATIONS:Overall Dimensions .................... 26.5" x 18" x 34.5"Capacity Ea. Drawer (ball-bearing slides) .... 85 lbs.Weight ........................................................ 107 lbs.
Sturdy 5" x 2" casterssupport up to 1,100 lbs.
Waterloo Series
The Waterloo Series is designed for the discriminating professional who needs high-quality tool storage at an affordable price.
FEATURES:• Non-slip drawer liners protect surfaces and hold tools in place.• Internal tubular keyed locking system protects valuable tool collections.• Full-extension 85 lb. ball-bearing drawer slides support drawers full of tools.• Rugged double wall construction adds strength.• SolidTraxTM drawer assembly adds stability and strength.
Part No. 1-914L-AG4Reg. Net Price $14.70
$1250
3-In-1 Air Blow Gun
Dual air chuck that inflates truck and car tires. Designed to be used as eithera blow gun or a tire inflater. Versatile tool for the truck driver or car owner.
SPECIFICATIONS:Max. Working Pressure ... 110 PSIAir Consumption @ 90 PSI ............ 1/4" Hose .................... 13 CFM 3/8" Hose .................... 15 CFMOverall Length ..................... 12.5"
8:1 Energy Audit IR Thermometer/ScannerWith Star Burst Laser Targeting
FEATURES:• In scanning mode, color of light panel (red, green or blue) and beeper sound (fast, silent or slow) indicate whether target is above, within or below reference temperature setpoint bandwidth.• Large backlit LCD display turns off after 15 seconds of inactivity.• Unique Star Burst laser targeting system helps approximate the target/spot size.• Set point band options 1oF, 5oF and 10oF.• Auto-power off after 60 seconds of inactivity.• Squeezing and holding trigger captures reference temperature & launches scan mode.
Ideal for energy auditors, building inspectors, HVAC technicians, electricians, manufacturing technicians, food processing inspectors and homeowners.
Model IRTC50Part No.8-304-060Reg. Net Price $71.35
$6065
SPECIFICATIONS:Distance to Spot Ratio .................................... 8:1Range ........................................... -40oF to 428oFAccuracy ....... ±2% above 32oF, ±3% below 32oFOperating Temp. .......... 32oF - 104oF @ <90%RHDimensions ......................... 5.31" x 1.65" x 6.81"
INCLUDES:• (1) 9V Battery• User's Manual• 1 Year Limited
Warranty
FEATURES:• Adjustable bezel.• Knife-edge contacts.• Sharp, clear dial graduations.• Thumb-operated fine adjustment roll.• Hardened stainless steel bar, measuring surfaces,rack, gears & depth rod.• Lock screws for sliding jaw and dial bezel.• Sharp, black graduations on satin finished bar.• Positive, spring-loaded double pinion anti-backlash control.• Provides quick, accurate measurement of O.D., I.D. and depth.
Starrett #3202-6Range: 0-6"
Part No. 1-855-61467Reg. Net Price $105.00
$8400
Dial Calipers Series 3202
Multi-Axis Stop
FEATURES:• 5/16" hardened stop rod can be quickly and accurately positioned.• Large 1/2-13" socket head cap. • Stop rod stays parallel to the milling machine table for increased accuracy. • Base of unit is keyed to 5/8" T-slot in table.• Unique design stays completely below the top surface of vise jaws for cutter clearance.
Part No. 1-811-48000Reg. Net Price $99.99
$7999T-nutIncluded.
Part No. 1-700D-V-400Reg. Net Price $26.45
$2381
One 15X (15mm) and20X (10mm) swing out double lens systems in chrome plated brass case. Vinyl carrying case.
DoubleCoddington MagnifierDONEGAN
Call: 1-800-521-1740 Fax: 1-800-322-4292 Web: KBCTools.com
CUTTING TOOLS
4
Carbide Tipped Chucking Reamers
ROCK RIVER TOOL, INC.
FRACTIONALSIZES
For all general reamingof steel, cast iron, non-ferrous metals, plastics and non-metals. Straight shank and straightpolished flutes. Carbide tips brazed to one-piece hardened tool steel bodies.
STANDARD TOLERANCES:Fractional ........... +.0003"/-.0000"
Flute Part No. Reg. Dia. Length OAL 5-655A- Net Price
$33.6533.6534.4035.6039.90 48.1052.3554.5055.4558.0559.9564.7075.3579.00
3/16" 1-1/8" 4-1/2" 1/4 1-1/2 6 5/16 1-1/2 6 3/8 1-3/4 7 7/16 1-3/4 7 1/2 2 8 9/16 2 8 5/8 2-1/4 9 11/16 2-1/4 9 3/4 2-1/2 9-1/2 13/16 2-1/2 9-1/2 7/8 2-5/8 10 15/16 2-5/8 10 1 2-3/4 10-1/2
-012-016-020-024-028-032-036-040-044-048-052-056-060-100
$28.6028.6029.2430.2633.9240.8944.5046.3347.1349.3450.9655.0064.0567.15
SALE!
4 Pc. ZErO Flute M35 CobaltCountersinks and Deburring Tool Sets
FEATURES:• M35 cobalt; 6% tungsten, 5% moly, 5% cobalt - for long life in all types of materials.• Through-hole design that is easy to resharpen using a small grinding wheel in the cross-hole.• Simple all-purpose versatility that provides flawless countersinking and deburring.• Cam relieved for totally chatter-free cuts.• Chamfer diameters ranging from 7/64" to 1-1/32".• Free cutting action - minimal power needed - use by hand or machine feed.• Works on all materials. Excels on aluminum, plastics, and other nonmetallics.• Micro-smooth CNC precision ground for clean smooth cutting without smearing.
STRAIGHT SHANK,CNC PRECISION CAM GROUND, CHATTERLESS CUTTING ACTION
5/16", 3/8", 1/2", 5/8"
60°82°90°
-53508-53518-53528
$76.1276.1276.12
Degree Sizes Included Part No. Reg. Angle In Set 1-159A- Net Price
$68.5168.5168.51
NOW!
5 Pc. Set Shown
Primarily for use in screw machines. Performs well in limited access areas or where extra rigidity is required. Short length providesincreased rigidity in machine drilling. Also referred to as stub drills. 135° SPLIT POINT
RIGHT HAND
HIGH SPEEDSTEEL
Cobalt HSS is used for drilling in tough, high tensile strength materials. Drills are made of heat resistant, heavy duty cobalt high speed steel, with heavy duty flute construction and 135° Split point.
FRACTIONAL SIZES
Part No. Reg. Size OAL 1-016A- Net Price
$1.621.641.621.842.102.132.312.623.063.513.874.284.285.045.34
$6.386.657.597.999.469.19
10.8310.8412.3512.3515.2514.8215.2514.7637.93
$38.2441.1939.6746.8645.5247.7545.9654.8952.6661.5858.0166.0563.8169.6266.94
1/16" 5/64 3/32 7/641/8
9/64 5/3211/64 3/1613/64 7/3215/64
1/417/64 9/32
-004-005-006-007-008-009-010-011-012-013-014-015-016-017-018
19/64"5/16
21/6411/3223/64
3/825/6413/3227/647/16
29/6415/3231/64
1/233/64
-019-020-021-022-023-024-025-026-027-028-029-030-031-032-033
17/32"35/64 9/1637/6419/3239/64
5/841/6421/3243/6411/1645/6423/3247/64
3/4
-034-035-036-037-038-039-040-041-042-043-044-045-046-047-048
1-5/8" 1-11/16 1-3/4 1-13/16 1-7/8 1-15/16 2-1/16 2-1/8 2-3/16 2-1/4 2-3/8 2-7/16 2-1/8 2-5/8 2-11/16
2-3/4" 2-13/16 2-15/16 3 3-1/16 3-1/8 3-1/4 3-5/16 3-3/8 3-7/16 3-9/16 3-5/8 3-11/16 3-3/4 3-7/8
3-7/8"444-1/84-1/84-1/44-1/44-1/24-1/24-5/84-5/84-3/44-3/455
$1.911.931.912.172.472.502.713.083.614.134.555.045.045.936.28
Part No. Reg. Size OAL 1-016A- Net Price
Part No. Reg. Size OAL 1-016A- Net Price
$7.517.828.939.40
11.1310.8212.7412.7614.5314.5317.9417.4317.9417.3644.63
SALE! SALE! SALE!$44.99
48.4646.6755.1353.5556.1854.0864.5861.9572.4568.2577.7075.0881.9078.75
Cobalt Screw Machine Drills
6-Flute Double End Countersinks
Two cutting ends give you twice the tool life of a single end tool.
1/8"3/161/4
5/163/81/2
Body Part No. Part No. Part No. Reg. Dia. OAL 1-1646H- 1-1646H- 1-1646H- Net Price
60° 82° 90°
1-1/2"222-1/22-1/23
-60008-60012-60016-60020-60024-60032
-82008-82012-82016-82020-82024-82032
-90008-90012-90016-90020-90024-90032
$14.8515.1815.7618.2820.3625.54
$13.3713.6614.1816.4518.3222.99
SALE!
HIGH SPEED STEEL
FEATURES:• Allows cutting through a depth of 2". • Exceptionally strong, safe, and shatter resistant. • Cuts a wide variety of materials including wood, metal, and steel. • Manufactured with hardened heat resistant and positive rake high speed steel teeth welded to a durable alloy backing and cap.
13 Pc. Deep Cut Bi-Metal General Purpose Hole Saw Kit
Starrett #KDC09051-NPart No. 1-856-01218Reg. Net Price $129.68
$11023
KIT INCLUDES: • DCH Series Hole Saws - 3/4", 7/8", 1-1/8", 1-3/8", 1-1/2", 1-3/4", 2", 2-1/4", 2-1/2"• A1E Extended Length Arbor• A2E Extended Length Quick Hitch Arbor• A014CE Extra Length HSS Pilot Drill• A12 Arbor Adapter
Step Drills
The UNIBIT™ Step Drill uses a unique single flute design to drill perfectly round holes in thin materials quickly with less effort. It also incorporates cutting steps of progressively larger diame-ters and saves money because one bit can replace an entire set of costly twist drill bits.
®
No. of Hole Shank Step Part No. Part No. Item Holes Sizes Dia. Thick. 1-820- 1-820-
$22.1522.1539.8847.10
UNIBIT 1TM 13 1/8"- 1/2" 1/4" 1/8" UNIBIT 2TM 6 3/16"- 1/2" 1/4 3/8 UNIBIT 3TM 9 1/4"- 3/4" 3/8 1/8 UNIBIT 4TM 12 3/16"- 7/8" 3/8 1/8
-UNIBIT1-UNIBIT2-UNIBIT3-UNIBIT4
$29.5029.5053.1462.82
-UNIBIT1T-UNIBIT2T-UNIBIT3T-UNIBIT4T
UNCOATED TiN COATED
ONLY! ONLY!
FEATURES:• Non-skid tip.• Easy to sharpen.• Automatic deburring action.• Single cutting edge creates perfectly round holes in metal, plastic, wood and other thin materials without center punching.
All Sets Supplied In Plastic Case.
Major Credit Cards Accepted:
CUTTING TOOLS
5Subscribe @ KBCTools.com to Get Exclusive Email Offers.
8 Pc. Hand AdjustableReamer SetHIGH SPEED STEEL
Supplied in a fitted wood case.
FEATURES:• Each reamer adjusts from a smaller size to a larger size.• Reamers are used for light cut, repair work, removing
stock, or for enlarging holes.• Can be hand operated by use of wrenches.
15/32" to 1-1/16"Part No. 1-135-800Reg. Net Price $130.20
$9114 MADE IN ENGLAND
Premium Tapsthat CustomersAsk for by Name.
CLARKSON/OSBORNBlue Wizard Spiral Pointed Taps
A spiral point tap with Blue Surface finish for through holes in mild steel, malleable iron & difficultto machine materials, such as stainless steel& high alloyed metals.
2 Flute 1/4"3 Flute 5/16" & Up
HIGH SPEED STEEL GROUND THREAD RIGHT HAND
$9.279.99
13.5219.85
1/4-20 NC H3 5/16-18 NC H3 3/8-16 NC H3 1/2-13 NC H3
Ground Thread Part No. Reg. Size Limits 1-361A- Net Price
$10.9011.7515.9023.35
FRACTIONAL SIZES
-0161-0201-0241-0321
NOW!
MICRO 100 is a space age,micro grain carbide of excellent quality. It is in a class of it’s own,resulting from the exclusive treatingprocess. Considerably prolongs tool life in machining all hard stainlesssteels, efficiently performs in exoticmetals. Provides vastly increased speed and feed rates in cutting aluminum, copper, stainlesssteels, high temperature alloys, thermoplastics and compositesused in the aircraft industry.
Micro-Grain carbide +PLUS!A
B
CL
T
W
T3°
3°
8°10°
Square Nose Tool
Style C Carbide Toolbits
1/4" 1/4" 2" 1/16" 1/4" 1/4" 5/16 5/16 2-1/4 3/32 5/16 3/8 3/8 3/8 2-1/2 3/32 3/8 3/8 7/16 7/16 3 3/32 7/16 1/2 1/2 1/2 3-1/2 1/8 1/2 1/2 5/8 5/8 4 5/32 5/8 5/8 3/4 3/4 4-1/2 3/16 3/4 3/4
-C4-C5-C6-C7-C8-C10-C12
$12.4513.1513.5513.7014.2025.0030.90
Part No. Reg. A B C T W L 1-428- Net Price
TipShankDimensions
$11.2111.8412.2012.3312.7822.5027.81
SALE!
20 Pc. TiN Coated 2 & 4 Flute Center CuttingSingle End Mill Set
Part No.5-300T-100
Reg. NetPrice $102.25
$8180
SET INCLUDES(1 EACH 2 & 4 FLUTE): • 3/16", 1/4", 5/16", 3/8" (3/8" Shank)• 7/16", 1/2" (1/2" Shank)• 9/16", 5/8" (5/8" Shank)• 11/16", 3/4" (3/4" Shank)
HIGH SPEED STEEL
Supplied
in awood
case.
Internal ThreadCleaner &Restorer
Part No. 1-842-250Reg. Net Price $22.65
$1925
Two-Handled Internal Rethreading Tool (9" long) offers double action and can be locked in place. Pouched. Weight 0.95 lb.
$23.05
16.00
CUTTER SETS Part No. Reg. Description Threads 1-842- Net Price
Standard 9, 10, 11, 12, 13, 16, 18, Set 20, 24, 27, 28,32, TPI Metric .80, 1.00, 1.25, 1.50, 1.75, Set 2.00, 2.50, 3.00 pitch
-300
-301
$19.59
13.60
SALE!
INCLUDES:• 3 Popular Bits: - 14 TPI for 3/4" Pipe - 11-1/2 TPI for 1" to 2" - 8 TPI for up to 6" Dia.
4 Flute Plug Hand Taps
FEATURES:• General purpose taps.• Widely used in through holes and where there is sufficient room at the bottom in blind holes.
LIST NO. 103RIGHT HANDGH LIMIT - H3HIGH SPEED STEELGROUND THREAD
1/4-20 NC 1/4-28 NF 5/16-18 NC 5/16-24 NF 3/8-16 NC 3/8-24 NF 1/2-13 NC 1/2-20 NF 5/8-11 NC 5/8-18 NF 3/4-10 NC 3/4-16 NF
$6.206.207.17 7.17 8.24 8.24
16.2816.2828.7828.7840.5140.51
Part No. Reg. Size 103- Net Price
-1420-43P-1428-43P-51618-43P-51624-43P-3816-43P-3824-43P-1213-43P-1220-43P-5811-43P-5818-43P-3410-43P-3416-43P
SALE!$4.96
4.965.74 5.74 6.59 6.59
13.0213.0223.0223.0232.4132.41
1/16" to 1/2" by 64thsPart No. 5-015A-29054Reg. Net Price $622.68
$56041
25 Pc. ChuckingReamer Set
HIGH SPEED STEELSTRAIGHT SHANKSTRAIGHT FLUTE
SUPPLIED IN STEEL INDEX
Chucking Reamers (M-2 High Speed Steel). Designed for use in turret lathes, screw machines, drill presses and all types of machine tool equipment. Ground with a 45O chamfer they are suitable for reaming most materials ordinarily encountered.
FEATURES:• Easily resharpened.• Not recommended for use in hand-held tools.• May be used on hardened steel and work hardening alloys.• Rigid set-ups & good machinery maintenance are a must.
Carbide Uniflute CountersinksSeries 60
Body Length Shank Reg. Dia. Overall Dia. 60O 82O 90O Net Price
1/8" 1-1/2" 1/8" 3/16 1-1/2" 3/16 1/4 2 1/4 3/8 2 1/4 1/2 2-3/8 1/4 3/4 3 1/2 1 3 1/2
Part No. 5-100-
-60001-60021-60041-60061-60081-60101-60121
-60006-60026-60046-60066-60086-60106-60126
-60011-60031-60051-60071-60091-60111-60131
$10.74 13.43 16.24 31.59 43.83 81.53 133.37
$12.64 15.80 19.11 37.17 51.56 95.92 156.91
SALE!
Recommended for use on abrasive, non-metallic and non-ferrous materials.
FRACTIONAL SIZES
Call: 1-800-521-1740 Fax: 1-800-322-4292 Web: KBCTools.com
CUTTING TOOLS
6
4 Flute Extra Length Solid Carbide Center Cutting Single End MillsLonger flute length to allow deeper cuts.List C430
1/8" 1/8" 5/8" 2" 1/8 1/8 3/4 3 1/8 1/8 1 3 1/4 1/4 1 3 1/4 1/4 1 4 1/4 1/4 1-1/2 4 1/4 1/4 1-1/2 6 3/8 3/8 1 3 3/8 3/8 1 4 3/8 3/8 2 4 3/8 3/8 1-1/2 6 3/8 3/8 3 6 1/2 1/2 1 4 1/2 1/2 2 4 1/2 1/2 1-1/2 6 1/2 1/2 3 6
$15.6023.9023.9030.6032.3032.3043.6043.7048.0048.0069.8069.8070.4070.40
101.00101.00
Flute Part No. Reg. Dia. Shank Length OAL 1-3244- Net Price
-001-002-003-007-008-009-010-015-016-017-018-019-024-025-026-027
$12.4819.1219.1224.4825.8425.8434.8834.9638.4038.4055.8455.8456.3256.3280.8080.80
SALE!
FEATURES:• Center-cutting.• Full CNC ground.• Radius tolerance ±.002.• Extra fine grade carbide.• Microshield™ HM TiAlN Coating.• Ideal for most milling applications.• Ultra high transverse rupture strength.
MICROSHIELD™ TiAIN -TITANIUM ALUMINUM NITRIDE:
TiAIN offers a higher level of thermal stability above TiN and TiCN with abrasion resistance. Ideal for high heat applications found in milling steels, stainless steels and high temp alloys with a hardness of 52 HRc and below.
4 Flute TiAIN Coated General Purpose Solid Carbide Corner Radius End Mills LIST C430R
Mill Shank Length Part No. Reg. Part No. Reg. Part No. Reg. Dia. Dia. of Cut OAL 5-431- Net Price NOW! 5-432- Net Price NOW! 5-433- Net Price NOW! 1/8" 1/8" 1/2" 1-1/2" 3/16 3/16 5/8 2 1/4 1/4 3/4 2-1/2 5/16 5/16 13/16 2-1/2 3/8 3/8 1 2-1/2 7/16 7/16 1 2-3/4 1/2 1/2 1 3
-91372-91375-91378-91382-91386-91391-91353
$15.6619.7126.9137.5343.7451.3074.52
.015 Radius .020 Radius .030 Radius
-91374-91377-91380-91384-91389-91393-91399
$15.6619.7126.9137.5343.7451.3074.52
-91373-91376-91379-91383-91387-91392-91398
$15.6619.7126.9137.5343.7451.3074.52
$17.4021.9029.9041.7048.6057.0082.80
$17.4021.9029.9041.7048.6057.0082.80
$17.4021.9029.9041.7048.6057.0082.80
Solid Carbide Reamers4 FluteBelow 1/4" Dia.,6 FluteOn Larger Sizes
For general purpose reaming applications in ferrous metalsand most non-ferrous materials. Precision ground with straightflutes for making smooth, accurate holes while retaining long tool life.
STRAIGHT SHANK STRAIGHT FLUTE
Decimal. Flute Part No. Reg. Size Equiv. Length OAL 5-661- Net Price
1/16" .0625" 3/8" 1/8 .1250 5/8 3/16 .1875 7/8 1/4 .2500 1 5/16 .3125 1-1/8 3/8 .3750 1-1/4 7/16 .4375 1-3/8 1/2 .5000 1-3/8
$11.5515.7021.1028.1037.8045.3558.9073.55
-018-044-066-087-100-111-117-121
1-1/2"2-1/42-3/433-1/43-1/23-3/44
$9.8213.3517.9423.8932.1338.5550.0762.52
SALE!
GROUND THREAD
MetricTap/Drill SetIndexes organize 9 tapswith the correct drill bit!
Set includes plughand taps andjobbers drills listed.
Part No.1-393-103Reg. Net
Price $52.20
$4437
Includes Sizes
2.5 x 0.45 2.05mm 3.0 x 0.50 2.50mm 3.5 x 0.60 2.90mm 4.0 x 0.70 3.30mm 5.0 x 0.80 4.20mm 6.0 x 1.00 5.00mm 8.0 x 1.25 6.70mm 10.0 x 1.50 8.50mm 12.0 x 1.75 10.20mm
Tap Drill
HIGH SPEED STEEL
RIGHTHAND
8 Pc. Solid CarbideBurr Kit with 1/4" Shanks
SUPPLIED IN A WOOD BOX
KIT INCLUDES (1 Ea.):• SD1 Ball - 1/4"• SE1 Oval - 1/4" x 3/8"• SM1 Cone - 1/4" x 1/2"• SN1 Inverted - 1/4" x 5/16"• SA1 Cylindrical - 1/4" x 5/8"• SC1 Radial End - 1/4" x 5/8"• SF1 Tree, Radius End - 1/4" x 5/8"• SG1 Tree, Pointed End - 1/4" x 5/8"
Standard Plain Cut: General purpose cut, where stock removal rates & finish requirements are average. Performs best on soft ferrous materials.
Part No. 1-338-000Reg. Net Price $79.90
$5593
Standard CutPart No. 5-100-71049Reg. Net Price $61.08
$5497SA-43 SC-42 SC-41 SD-42 SE-41 SF-41 SG-41 SM-45 SL-42 SN-42
10 Pc. MiniatureCarbide Bur Set1/8" Shank, 1-1/2" OAL,1/8" Head Diameter
Plain type solid carbide 60° combined drills and countersinks with straight flutes are used for producing center holes in components or workpieces which require machining betweencenters. Fine grain 6% cobalt C-2 grade.
Solid Carbide Combined Drills & Countersinks
1 1/8" 3/64" 2 3/16 5/64 3 1/4 7/64 4 5/16 1/8 5 7/16 3/16 6 1/2 7/32
$9.1812.0015.0021.0031.0042.00
-001-002-003-004-005-006
Body Drill Part No. Reg. Size Dia. Dia. 1-049- Net Price
$7.8010.2012.7517.8526.3535.70
SALE!
60° ANGLE INCLUDED
Style E Carbide Tipped Toolbits
Grade C-5 general purpose carbide grade for steel and steel alloys.
$3.784.285.688.26
11.50
$4.685.186.839.85
13.58
-E5-E6-E8-E10-E12
5/16" 5/16" 2-1/4" 3/8 3/8 2-1/2 1/2 1/2 3-1/2 5/8 5/8 4 3/4 3/4 4-1/2
Part No. Reg. A B C 1-2445- Net Price SALE!
Shank Dimensions
W A
C
B
L
TBOTHSIDES
6°STEEL 3°
60°
SHARP TO .005 RADIUS
Neutral 60°
American Standard
The style E tool is designed to cut an American Standard 60° V thread. It is easily modified to cut coarser threads. As supplied, the style E tool is suitable for use in 30° angle boring bars.
Major Credit Cards Accepted:
CUTTING TOOLS
7Shop our current Inventory Clearance Deals at KBCTools.com
FEATURES:• Micrograin 10% cobalt grade.• Shank Diameter: 1/8"• Overall Length: 1-1/2"
4 Flute PremiumSolid CarbideCenter CuttingMiniature End Mills
Series 111
Designed foraggressive milling of most materials.
Flute Part No. Reg. Size Length 5-100- Net Price
.005" .015" .010 .030 .015 .045 .020 .060 .025 .075 .030 .090 .035 .105 .040 .120 .045 .135 .050 .150 .055 .165 .060 .180 .065 .195 .070 .210 .075 .225 .080 .240 .085 .255 .090 .270 .095 .285 .100 .300
$69.7249.8129.4728.9628.9629.4722.8222.3022.8222.8222.8220.3418.2418.2418.2418.2418.2418.2418.2418.24
-51001-51005-51009-51017-51021-51025-51031-51039-51043-51049-51053-51061-51067-51071-51077-51085-51087-51089-51093-51099
SALE!$59.26
42.3425.0524.6224.6225.0519.4018.9619.4019.4019.4017.2915.5015.5015.5015.5015.5015.5015.5015.50
ThreadRepair Kits
KITS INCLUDE: • (10) Inserts• (1) Drill• (1) Tap• (1) Installation tool• (1) Tang break
4-40 x 1.5D 5-40 x 1.5D 6-32 x 1.5D 8-32 x 1.5D 10-24 x 1.5D 12-24 x 1.5D 1/4-20 x 1.5D 5/16-18 x 1.5D 3/8-16 x 1.5D 4-48 x1.5D 6-40 x 1.5D 8-36 x 1.5D10-32 x 1.5D1/4-28 x 1.5D 5/16-24 x 1.5D 3/8-24 x 1.5D
Thread Part No. Reg. Size 1-842- Net Price
-SK20215-SK20315-SK20415-SK20515-SK20615-SK20715-SK20815-SK20915-SK21015-SK30215-SK30415-SK30515-SK30615-SK30815-SK30915-SK31015
$29.1230.0228.3129.3026.7832.8528.7632.3138.5230.0228.3129.3026.7828.7632.3138.52
$32.3633.3531.4532.5529.7536.5031.9535.9042.8033.3531.4532.5529.7531.9535.9042.80
SALE!
Part No. Reg. Size 5-530- Net Price
1/2" 9/16 5/8 11/16 3/4 13/16 7/8 15/1611-1/161-1/81-3/161-1/4
-111-113-116-119-121-124-127-130-133-136-139-142-145
$27.8427.8427.8427.8429.6432.6933.2435.2237.3639.5243.1244.9145.80
$23.6623.6623.6623.6625.1927.7928.2529.9431.7633.5936.6538.1738.93
NOW! Part No. Reg. Size 5-530- Net Price
1-5/16" 1-3/8 1-7/16 1-1/2 1-9/16 1-5/8 1-11/16 1-3/4 1-13/16 1-7/8 1-15/16 2
-148-151-154-157-160-163-166-169-172-175-178-181
$50.3055.6861.0866.4670.0671.8680.8482.6493.4193.4197.00
104.19
$42.7647.3351.9256.4959.5561.0868.7170.2479.4079.4082.4588.56
NOW!
Annular Cutters
3/4" SHANK
SHORTSERIES(1" DEPTH)
FEATURES:• Eliminates multi-step drilling.
• More accurate & clear holes.• Better finishing.
HIGHSPEEDSTEEL
Style AL & ARCarbide Tipped Toolbits
Style A tools are designed for turning, boring or facing to a square shoulder. Maximum regrindsare possible for light cutting where the maximum wear occurs at or near the front face of the tool. STRAIGHT TURNING TOOLS
GRADE C-5
Shank Dimensions Left Hand Right Hand Nose Part No. Reg. Part No. Reg. Square Length Radius 1-2445- Net Price 1-2445- Net Price ONLY! ONLY! 1/4" 2" 5/16 2-1/4 3/8 2-1/2 7/16 3 1/2 3-1/2 5/8 4
$3.784.244.424.625.928.42
$3.784.244.424.625.928.42
-AL4-AL5-AL6-AL7-AL8-AL10
-AR4-AR5-AR6-AR7-AR8-AR10
1/64"1/641/641/321/321/32
$4.735.305.535.787.40
10.53
$4.735.305.535.787.40
10.53
Standard Length Solid Carbide Single End MillsSingle end mills are designed for general millingoperations. The spiral multi-flute design permitsa faster and smoother cutting action.
Flute Shank Flute Part No. Reg. Dia. Dia. Length OAL 1-330- Net Price
-004-006-008-010-012-014-016-018-020-024-028-032
1/16" 1/8" 3/16" 1-1/2" 3/32 1/8 3/8 1-1/2 1/8 1/8 1/2 1-1/2 5/32 3/16 9/16 2 3/16 3/16 5/8 2 7/32 1/4 5/8 2-1/2 1/4 1/4 3/4 2-1/2 9/32 5/16 3/4 2-1/2 5/16 5/16 7/8 2-1/2 3/8 3/8 1 2-1/2 7/16 7/16 1 2-3/4 1/2 1/2 1 3
$8.008.008.009.619.60
11.2312.2017.0015.6019.0029.0032.00
$6.406.406.407.697.688.989.76
13.6012.4815.2023.2025.60
NOW!
3 FLUTE
1/16" 1/8" 3/16" 1-1/2" 3/32 1/8 3/8 1-1/2 1/8 1/8 1/2 1-1/2 5/32 3/16 9/16 2 3/16 3/16 5/8 2 7/32 1/4 5/8 2-1/2 1/4 1/4 3/4 2-1/2 9/32 5/16 7/8 2-1/2 5/16 5/16 7/8 2-1/2 3/8 3/8 7/8 2-1/2 7/16 7/16 1 2-1/2 1/2 1/2 1 3
$5.805.805.809.619.28
11.2310.5013.9312.9017.5022.6827.50
-004-006-008-010-012-014-016-018-020-024-028-032
NOW!
2 FLUTE Flute Shank Flute Part No. Reg. Dia. Dia. Length OAL 1-325- Net Price
$4.644.644.647.697.428.988.40
11.1410.3214.0018.1422.00
Silver & Deming Drills
6" OVERALL LENGTH
Expands the size range capacity of a 1/2"portable drill chuck. Ideal for drilling inlow & medium tensile strength materials.
8 Piece Set9/16" to 1" by 16thsPart No. 1-060-200Reg. NetPrice $72.25
$5780
$6.767.648.499.28
11.0212.3714.4416.9319.3221.1723.4028.0629.9133.3035.17
-036-040-044-048-056-060-100-104-108-112-116-120-124-128-132
9/16" 5/8 11/16 3/4 7/8 15/1611-1/161-1/81-3/161-1/41-5/161-3/81-7/161-1/2
Part No. Size 1-060- ONLY!
HIGH SPEED STEEL
118° POINT
1/2"SHANK
HIGH SPEED STEEL
4 Flute 3/16" ShankMiniature Double End Mills
Designed for general purposemilling operations.
SPECIAL BUY!Quantities Limited.
Part No. 5-265-010Reg. Net Price $7.75
$194• Mill Dia.: 1/8"• Flute Length: 3/8"• OAL: 2-1/4"
29 Pc. ScrewMachine Drill Set
Primarily for use in screw machines. Performs well in limited accessareas or where extrarigidity is required.Short length providesincreased rigidityin machine drilling.Also referred toas stub drills.
Part No.1-050A-000
Reg. NetPrice $135.73
$11537
118° POINTRIGHT HAND
HIGHSPEED STEEL
1/16"to 1/2"
by 64ths
Call: 1-800-521-1740 Fax: 1-800-322-4292 Web: KBCTools.com
CARBIDE TOOLING
8
SI-MCLN Right HandIndexable Boring Bars
For use withCNMG
Style Inserts
Style L• Negative 5O side and end cutting edge angle. • For use with 80O negative diamond CNMG inserts.
Ko
7o NEGRAKE F
D
B
C
5o
7oKo
Ko
7o NEGRAKE F
D
B
C
5o
7oKo
Min. CNMG Tool Bore Insert Part No. Reg. Style B C D F KO Series 1-285R- Net Price
S16T-MCLNR/L-4S20U-MCLNR-4S24U-MCLNR/L-4
432 1.28"1.531.78
12"1414
1"1-1/41-1/2
14O
14O
11O
.640"
.765
.890
-120-121-122
SALE!$254.39
271.66298.35
$203.51217.33238.68
B
L1
L2
F
H1
2o
H
External ThreadingToolholders
B
L1
L2
F
H1
2o
H
$63.0068.7068.7068.7072.1680.17
AL 3/8-3 .37" .63" 2.5" .81" AL 050-3 .50 .63 3.5 .87 AL 0625-3 3/8" .63 .63 5.0 1.02 AL 075-3 .75 .75 5.0 1.02 AL 100-3 1.00 1.00 6.0 1.02 AL 125-3 1.25 1.25 7.0 1.18
$74.1280.8280.8280.8284.8994.32
-085-005-006-010-015-020
Insert Size H, H1 Part No. Reg. Model No. (I.C.) B F L1 L2 1-289R- Net Price SALE!
All toolholders are supplied with 1-1/2° helix-angle.Supplied with anvil.
RIGHT HAND SHOWN
External Right HandThreading Inserts
60o PARTIALPROFILE(NON-TOPPING)
The "Partial Profile" inserts cut without "Topping" the O.D. of the thread. The same insert can be used for a range of different thread pitches.
VKX: TiN coated carbide grade excellent for stainless steel & cast iron.VSX: All purpose carbide grade. Coated for extra tool life. Able to withstand difficult cutting conditions.
Part No. Reg. Part No. Reg. I.C. TPI MM 1-2892- Net Price 1-2892- Net Price
VKX Grade VSX Grade
-510-VKX-515-VKX-520-VKX
3/8A 16 - 48 0.5 - 1.5 3/8G 8 - 14 1.75 - 3.0 3/8AG 8 - 48 0.5 - 3.0
$18.8918.8918.89
$16.0616.0616.06
-510-VSX-515-VSX-520-VSX
$18.8918.8918.89
$16.0616.0616.06
NOW! NOW!
Pitch Range
RIGHT HAND SHOWN LEFT HAND OPPOSITE
F
L
BSCLCR/L B
H95o
95o
Right Hand Shown, Left Hand Opposite
FEATURES:• 5O side or end cutting edge angle. • For use with 80O
diamond CCMT inserts.
For use withCCMT
Style Inserts
SCLC R Indexable Toolholders
CCMT Tool Width Height Length Insert Part No. Reg. Style B H L F Series 6-800R- Net Price
SCLCR 04-2SCLCR 06-2JSCLCR 08-3ASCLCR 10-3BSCLCR 12-3BSCLCR 16-3DSCLCR 12-4BSCLCR 16-4D
-042-062-103-113-123-163-224-264
0.315" 3/8 1/2 5/8 3/41 3/41
0.315" 3/8 1/2 5/8 3/41 3/41
2.36"3-1/244-1/24-1/264-1/26
21.51
32.52
43
0.394"0.5000.6250.7501.0001.2501.0001.250
$33.3130.3931.3233.3037.2439.2039.2041.18
$41.6437.9939.1541.6346.5549.0049.0051.47
NOW!
GRADE TG-320 - Excellent coated grade for generalpurpose cuts in steel & steel alloys. Equivalent to P10-P30 grade. Recommended cutting speed 500-1000 SFM.
ASA Insert Hole Corner Part No. Reg. Code IC Size Dia. Thickness Radius 1-2443- Net Price
CCMT-21.51 1/4" .110" 3/32" 1/64" CCMT-32.51 3/8 .173 5/32 1/64 CCMT-32.52 3/8 .173 5/32 1/32 CCMT-431 1/2 .216 3/16 1/64 CCMT-432 1/2 .216 3/16 1/32
-931-932-933-934-923
$9.229.509.50
12.5612.56
$6.927.137.139.429.42
SALE!
Style CCMTCarbide Inserts
80o DIAMONDFEATURES:• Single sided.• Screw on insert.• 7° relief angle.• Standard chip control.• Use for medium cuts.• Depth of Cut: 3/64" ~ 1/8".• Feed Rate: .004" ~ .012"/rev.
SPBA-SCut-Off Blades
1" 1/16" 4-3/8" .827"1 3/32 4-3/8 .8271 1/8 4-3/8 .8271 5/32 4-3/8 .8271-1/4 1/16 6 .9841-1/4 3/32 6 .9841-1/4 1/8 6 .9841-1/4 5/32 6 .984
100-S-2100-S-3100-S-4100-S-5125-S-2125-S-3125-S-4125-S-5
Block Part No. Reg. No. H W L h 1-244- Net Price
-009-010-011-012-013-014-015-016
$94.5094.5094.5094.5094.5094.5094.5094.50
$75.6075.6075.6075.6075.6075.6075.6075.60
SALE!
GRADE NC-3030 - Excellent coated grade for rough cuts in steel & steel alloys. Equivalent to P20-P40 & M20-M40 grade. Recommended Cutting Speed: 250-650 SFM.
SP Carbide Inserts
$10.9110.9110.9111.0311.0311.0311.3911.3911.3911.95
$8.738.738.738.828.828.829.119.119.119.56
SP200 .087" .366" .008" SP200R .087 .366 .008 SP200L .087 .366 .008 SP300 .122 .445 .008 SP300R .122 .445 .008 SP300L .122 .445 .008 SP400 .161 .445 .010 SP400R .161 .445 .010 SP400L .161 .445 .010 SP500 .201 .449 .012
-SP2-SP2R-SP2L-SP3-SP3R-SP3L-SP4-SP4R-SP4L-SP5
Insert Part No. Reg. Style W l r 1-244X- Net Price NOW!
Major Credit Cards Accepted:
CARBIDE TOOLING
9Shop More Tools for Metal @ KBCTools.com
Grade DVP656 - Tough and hard substrate with a very good resistance to thermaland mechanical shock PVD-TiN coating, best finishing applications higher cutting sfm.
C30-062-TP3-075
DD1
F
H
C
d
30°
C45-075-TP3-075
DD1
F
H
C
d
45°
C60-100-TP3-075
DD1
FH
C
d
60°
FEATURES:• 3/4" Weldon shank.• Positive TPHT inserts, 11O clearance.• Three cutting edges.• High rate of material removal.• Torx screw locking system.
TOOL ANGLES:Cutting Rake .. +11O
Axial Rake ......... 0O
Radial Rake ....... 0O
Indexable 30O, 45O & 60O Chamfer End Mills
$105.57105.57105.57
TPHT No. Gage Part No. Reg. Tool Number C D D1 d F H Inserts Insert 1-286A- Net Price
$124.20124.20124.20
C30-062-TP3-075 3-1/2" 5/8" 1.600" 3/4" .275" 1-1/4" 2 C45-075-TP3-075 3-1/2 3/4 1.517 3/4 .392 1-1/4 2 C60-100-TP3-075 3-1/2 1 1.560 3/4 .484 1-1/4 2
-095-100-105
32.52
SALE!
I.C.
r
HOLE
T
15°
TPHT Inserts
$10.85-020
Insert Hole Part No. Style I.C. T r Dia. 1-2866-
TPHT-32.52-EZ .375" .1563" .0312" .173"
DVP656
ONLY!
I.C.T
FLAT
D
.003
.005
6-1/2o RELIEFBOTH SIDES
0o 5o 60o
On edge style 0° rake precisionground - withdouble countersinks.
Style TNMCThreadingInserts 60O ‘V’
SCREW ON INSERT
Insert Part Reg. Style I.C. No. Net Price
TNMC-32-NV 3/8" TNMC-43-NV 1/2
-754-756
$8.229.30
$8.018.76
$9.009.70
C-5 Part No. 1-2445-
C-2 Part No. 1-2442-
Coated Part No. 1-2448-
SALE!$6.01
6.57
Reg. Net Price SALE!
Reg. Net Price SALE!
$6.176.98
$6.757.28
D
A2o
L
L1
D1
F
D
A2o
L
L1
D1
F
D
A2o
L
L1
D1
FAll toolholders are supplied with 1-1/2° helix-angle.
Internal Right Hand ThreadingToolholders
Prefix N: No anvil used Prefix A: Supplied with anvil
$99.7099.70
110.35110.35121.93
$84.7584.7593.8093.80
103.64
Insert Min. Minor Size Dia. of Part No. Reg. Model No. (I.C.) A L L1 D D1 F Thread 1-289R- Net Price
-090-096-100-105-110
NVR 0375-2 1/4" .67" 7" 1.00" .75" .37" .28" .50" NVR 050-3 .67 7 1.43 .75 .50 .37 .67 NVR 0625-3 .67 7 1.50 .75 .625 .46 .80 AVR 075-3 3/8 .67 7 1.50 .75 .75 .51 .90 AVR 100-3 1.12 10 2.50 1.25 1.00 .65 1.20
DIMENSIONS
NOW!
Internal Right Hand ThreadingInserts 60° PARTIAL PROFILE (NON-TOPPING)
The "Partial Profile" inserts cut without "Topping" the O.D. of the thread. The same insert can be used for a range of different thread pitches.
VKX: TiN coated carbide grade excellent for stainless steel & cast iron.VSX: All purpose carbide grade. Coated for extra tool life. Able to withstand difficult cutting conditions.
Pitch Range Part No. Reg. Part No. Reg. I.C. TPI MM 1-2891- Net Price 1-2891- Net Price
VKX Grade VSX Grade
-510-VKX-515-VKX-520-VKX
3/8A 16 - 48 0.5 - 1.5 3/8G 8 - 14 1.75 - 3.0 3/8AG 8 - 48 0.5 - 3.0
$18.8918.8918.89
$16.0616.0616.06
-510-VSX-515-VSX-520-VSX
$18.8918.8918.89
$16.0616.0616.06
NOW! NOW!
FEATURES: • For use with 55O
diamond positive clearance DCMT inserts.• Each holder includes high precision M2.5 x T-8 Torx Screw and Torx key.
SDNCN Indexable ThreadingToolholders55O ‘V’ Turning
SDNCN
Over DCMT Tool Square Overall Insert Insert Part No. Style Shank Length F Series 1-428- ONLY!SDNCN 0505 H2SDNCN 0606 H2SDNCN 0808 H2SDNCN 1010 H2
-103761-103762-103763-103764
5/16"3/81/25/8
4"444
.157"
.189
.250
.31321.51
$45.4553.2056.0062.15
DCMT 21.51 INSERT55o DiamondPart No. 1-428-501200 $9.14NOW ONLY!
F
62.5
Bantam System B1 Boring Kit
FEATURES:• .180" minimum bore• .007" radius inserts• GP22 grade inserts
INCLUDES:• 1 CSBI-165/187-1/2-7R holder• 10 CDCG-505L inserts
Part No. 1-294-071Reg. Net
Price $171.01
$15391
FEATURES:• Double sided.• 0° relief angle.• Use for medium cuts.• Pin and clamp insert.• Standard chip control.• Depth of cut - 5/64" ~ 15/64".• Feed rate - .010" ~ .020"/rev.
Style CNMGCarbide Inserts
CNMG-431 1/2" .203" 3/16" 1/64" CNMG-432 1/2 .203 3/16 1/32 CNMG-433 1/2 .203 3/16 3/64 CNMG-543 5/8 .253 1/4 3/64 CNMG-642 3/4 .313 1/4 1/32 CNMG-643 3/4 .313 1/4 3/64 CNMG-644 3/4 .313 1/4 1/16
$10.5810.5810.5813.6022.0222.0222.02
ASA Insert Hole Corner Part No. Reg. Code IC Size Dia. Thickness Radius 1-2443- Net Price
-685-686-687-452-688-689-453
$8.468.468.46
10.8817.6217.6217.62
SALE!
80o DIAMOND
GRADE TG-320 - Excellent coated grade forgeneral purpose cuts in steel& steel alloys. Equivalent toP10-P30 grade. Recommended Cutting Speed: 500-1,000 SFM.
Call: 1-800-521-1740 Fax: 1-800-322-4292 Web: KBCTools.com10
WORK HOLDING
3-Jaw Universal Iron Body Chucks
Series 342Medium Duty Value Line
FEATURES:• High value and lower cost.• One year warranty.• Maximum .003" TIR using nominating pinion.• .001" repeatability using nominating pinion.• Hardened scroll.• Three hardened pinions.• Semi steel bodies.
PLAIN BACKwith Two Piece Reversible Jaws Chuck Weight Part No. Reg. Dia. (lbs.) 1-495- Net Price
$290.00275.00350.00450.00675.00
5" 11 6 25 8 34 10 55 12 130
-0500-0600-0800-1000-1200
$246.50233.75297.50382.50573.75
SALE!
Specially designed for extra heavy-duty drilling applications on production drilling machines, jig bore, milling machines, lathes and radials. The ideal choice for those jobs that require close tolerance drilling. The ball thrust bearing reduces friction in the chuck’s closing mechanism, so the operator can apply more gripping power on the twist drill shank.
Heavy-Duty Ball Bearing Chucks
R-8 Shank Drill Chuck Arbors
Morse Taper Shank Drill Chuck Arbors
Wedge Sets
For removing taper mount chucks from arbors or chucks.
JACOBS TAPER
JACOBS TAPER
11N 0 - 3/8" 2JT K32 14N 0 - 1/2 3JT K3 16N 1/8 - 5/8 3JT K4
Chuck Chuck Uses Part No. Reg. Model Capacity Mount Key 1-508- Net Price
$142.64206.16236.67
$106.98154.62177.50
-30215-30221-30227
SALE!
#2 Wedge Set 2JT#3 Wedge Set 3JT
$13.8613.86
$12.4712.47
Used On Jacobs® Part No. Reg. Set No. Taper No. 1-508- Net Price
-13267-13268
SALE! Jacobs Part No. Reg. Taper 1-508- Net Price
2JT 3JT
-7339-7340
$100.64100.64
$85.5485.54
NOW!
Taper Jacobs Part No. Reg. Shank Taper 1-508- Net Price
2MT 2JT 2MT 3JT 3MT 2JT 3MT 3JT
-7307-7308-7314-7315
$18.6618.3026.0724.77
$16.7916.4723.4622.29
NOW!
5C Collet Chucks
FEATURES:• Forged steel chucks used for turning, facing, boring, grinding and milling operations. • Set-Tru Style features 4 micro adjustment screws for outstanding repeatability.• Tru-Length type features fixed collet position for fast and accurate work piece changes.• Designed for use with all 5C collets.• Maximum Speed: 6,000 RPM.
MADE IN POLAND
Weight Part No. Reg. Size Type (lbs.) 3-862- Net Price
5" Standard 9.9 5" Tru-Length 11.5 5" Set-Tru 11.9
$412.15727.45529.00
$350.33618.33449.65
-0501P-0503P-0505P
SALE!
V2
I
A
C
G
BDE
Long Point configuration allows for tool clearance.
Regal Live CentersLONG POINT
Max. Work Piece Morse Max Weight Part No. Reg. Taper A B C D E G V2 I RPM (lbs.) 1-435- Net Price
$284.00326.00424.00582.00
2 3/8" 1-7/8" 2-3/8" 1-3/4" 1/4" 5/8" 34 3 3/8 1-7/8 2-3/8 1-3/4 1/4 5/8 34 4 1/2 2-7/32 3 1-31/32 3/8 13/16 34 5 1/2 2-1/2 3-1/16 2-3/32 9/32 15/16 40
-48102-48103-48104-48105
310310
1,1001,100
4,0004,0004,0005,000
1-21/32"1-21/3222-5/32
$241.40277.10360.40494.70
SALE!
FEATURES:• Heavy-duty bearing design.• Accuracy guaranteed to ± .0001.• Points are through-hardened to 61-63 Rc.• Full length spindle for extra rigidity.• Bodies are heat-treated for additional strength.• Double row of angular contact bearings for superior performance.
FEATURES:• Fits any 5C collet.• Supplied with threaded rod.• Hardened for long life.• Black oxide.
5C Adjustable Collet Stop
Part No. 1-519-005
$710
Precision Expanding Mandrels
Hardened & ground for speedy set-ups. Sizes to 1" come with 1 sleeve. Larger sizes come with 1 large & 1 small sleeve.
2-1/2"2-3/42-3/43-1/43-1/244567
5" 6 7 7 7 9 911-1/21417
1/2" to 9/16" 9/16" to 21/32" 21/32" to 3/4" 3/4" to 7/8" 7/8" to 1" 1" to 1-1/4" 1-1/4" to 1-1/2" 1-1/2" to 2" 2" to 2-3/4" 2-3/4" to 3-3/4"
$47.0549.7558.6562.9071.00
121.75129.00158.40262.50292.15
-180-181-182-183-184-185-186-187-188-189
$37.6439.8046.9250.3271.0097.40
103.20126.72210.00233.72
SALE! Arbor Sleeve Part No. Reg. Range Length Length 1-588- Net Price
Major Credit Cards Accepted:
WORK HOLDING
11Call for Free Technical Support — All Help... All The Time.
1/8" - 7/8" by 16thsPart No. 1-5251-020Reg. Net Price $272.35
$23150
13 Pc. R8 RoundCollet Set
"Precision Grade"
FEATURES:• Hardened steel base.• Low height is ideal for small machine set-ups.• Light weight for easy handling.• 72 position index plate provides a hard stop every 5° ±15 arc seconds.• Uses standard ER-25 spring collets.• Spindle rides in preloaded ball bearings.• Maximum spindle runout is 0.0002" T.I.R.• Fitted wooden case & collet wrench included.
SPECIFICATIONS:Center Height ....................................... 1-7/8"Collet Capacity ............................... All ER-25Through Hole .......................................... 5/8"Weight ................................................... 4 lbs.
SUBURBAN TOOL Mini-Master™
Index Fixture
Model MM25RPart No. 1-806-570Reg. Net Price $965.00
$82025
REARVIEW
This ER collet chuck fits CNC lathes and can also be use for tapping applications. It seals coolant from the turret to the shankwith an o-ring on the end of the shank.
CNC Lathe ER Collet Chucks
FEATURES:• For coolant up to 1,500 PSI.• Collet pocket T.I.R 0.0001".• PowerCOAT nut included.
EXPANDED LISTING!
Shank Gage Collet Dia. Length Dia. Part No. Reg. Size (C) (l2) (D) 7-520- Net Price
$198.00198.00175.00196.00200.40
-04782-04784-04788-04786-04790
ER-25 1-1/4" 1.46" 1.65" ER-32 1-1/4 1.69 1.97 ER-32 1-1/2 1.50 1.97 ER-40 1-1/4 2.36 2.48 ER-40 1-1/2 2.36 2.48
$168.30168.30148.75166.60170.34
SALE!
FEATURES:• Standard 0.0002" T.I.R.• Collapse Range: 0.039"• Inspected for quality and accuracy.
ER Collets ER 25 COLLETS Part No. Reg. Size 7-520- Net Price
$24.0024.0024.0024.0024.0024.0024.00
-25008-25012-25016-25020-25024-25032-25040
1/8" 3/16 1/4 5/16 3/8 1/2 5/8
$20.4020.4020.4020.4020.4020.4020.40
NOW!
ER 32 COLLETS
$24.0024.0024.0024.0024.0024.0024.0024.00
-32008-32012-32016-32020-32024-32032-32040-32048
1/8" 3/16 1/4 5/16 3/8 1/2 5/8 3/4
Part No. Reg. Size 7-520- Net Price
$20.4020.4020.4020.4020.4020.4020.4020.40
NOW!
ER 40 COLLETS
$26.4026.4026.4026.4026.4026.4026.4026.40
-40008-40016-40024-40032-40040-40048-40056-40064
1/8" 1/4 3/8 1/2 5/8 3/4 7/81
Part No. Reg. Size 7-520- Net Price
$22.4422.4422.4422.4422.4422.4422.4422.44
NOW!
Super Quick ChangeFirst Time Buyers Set
FEATURES:• Triple Action Locking System.• Precise Repeatability within .0001".• 15° Locking Handle Position Adjustment.• Super Heavy Duty Locking Gear and Wedge Style Sliding Gibs.• High Tensile Strength Chromium-Molybdenum Alloy Steel Body, Locking Gear, Sliding Gibs, Locking Gear Head, and Locking Handle.• Thru Hardened, Ion Nitrided, Precision Ground Locking Gear and Sliding Gibs for Wear Resistance and Repeatability.• CNC Precision Ground and Qualified for accuracy and repeatability.• Thru Hardened, Ion Nitrided, and Xylan Coated Body.• Zero Backlash.• Anti-Rotation Pins.
#881#2
#7#1
Model SDN30BXA-FTBPart No. SD30BXA-FTBReg. Net Price $1,006.94
$80555
SET INCLUDES:• Tool post• #1 Turning & Facing Holder• #2 Turning, Facing, & Boring Holder• #7-71C Reversible Cut-Off Blade Holder• #881 Threading Holder• Triangle Toolholder
• Laydown Thread Boring Bar• Triangle Boring Bar• Cut-off Blade Stop• Square Shank Tool Insert• Boring Bar Insert• Cut-off & Grooving Insert• Threading Insert• Layout Insert
Chuck Stop SetDesigned to locate shorter parts beyond the chuck jaws to provide clearance for facing operations.
Part No. 1-811-30000Reg. Net Price $199.99
$15999
FEATURES:• The chuck stop includes 10 sets of different
height parallel bars to achieve the required spacing. Parallel bar heights from 1/2"
to 1-5/8" in 1/8" increments. 0.0002" parallelism accuracy. Supplied in a case.• A centering plug is used to keep the unit
centered to the ID of the chuck and strong neodymium magnets secure it to the face of the chuck. The included centering plug diameters are 1.4", 2.0", 2.5", 3.0", 3.5", and 4.0".
• The chuck stop is 6.0" in diameter.• Designed for 3 jaw chucks only. For use on 6" diameter chucks and larger.
1 3 2 3 2 4 3 4 3 5 4 5 5 6
Morse Morse Taper Taper Part No. Reg. Hole Outside 1-5142- Net Price
-010-015-025-030-045-050-060
$7.607.60
13.1513.1517.8517.8546.30
SALE!$6.08
6.0810.5210.5214.2814.2837.04
StandardDrill Sleeves
FEATURES:• Designed to be used with taper shank tools, providing accurate alignment
between the members.• Hardened and ground.• Precision ground for high concentricity.
Call: 1-800-521-1740 Fax: 1-800-322-4292 Web: KBCTools.com12
WORK HOLDING
Supra-SK E Keyless Drill Chucks
FEATURES: • Robust design. Stressed components made from steel.• No throughhole. Chucks must be tightened onto spindle with high torque. • Retention of the clamping force even when used under difficult conditions. • Lightweight design for powerful cordless and corded power tools.• Clamping and radial locking possible in one single movement.
Part No. 1-507-1193005Reg. Net Price $81.00
$7290
MADE IN GERMANY
Keyless self-tightening drill chucks suitable for percussion drilling on hand-operated power tools.
SPECIFICATIONS:Size Capacity .................... 1/32-1/2"Thread Mount ...................... 1/2-20"
Key-Type Super Chucks
Equipped with a sliding ring. Allcomponents are hardened and groundfor accuracy. Super holding and frictionfree movement for heavy duty drilling.
Chuck Jacobs Capacity Tapered Jacobs Part No. Reg. Model Equiv. Inches Mount Key 1-507- Net Price
$61.0078.0583.45
113.05127.26185.30256.85
81bS-13A 8-1/2N 0 - 5/16 2shJT K30 82bS-5A 11N 0 - 3/8 2JT K32 43S-6A — 0 - 1/2 33JT K3 83S-6A 14N 0 - 1/2 3JT K3 84S-6A 16N 1/32 - 5/8 3JT K3 85S-9A 18N 1/16 - 3/4 4JT K4 85bS-9A 20N 3/16 - 1-1/32 4JT K4
-510-511-512-513-514-515-516
$51.8566.3470.9396.09
108.17157.51218.32
NOW!
FEATURES:• Maximum T.I.R. 0.0001" taper to collet pocket.• Balanced to 25,000 RPM at G2.5 for high speed.• PowerCOAT included for 75% more clamping power.
Cutting tool life is reduced by 10% with every .0001" of T.I.R. Techniks improves cutting tool life and saves you money.
Produced According to AT3 Specifications.
$122.40122.40123.93122.40123.93132.35132.35137.70
Collet Gage Nose Part No. Reg. Size Length Dia. 7-520- Net Price
$136.00136.00137.70136.00137.70147.05147.05153.00
-22213-22225-22227-22235-22237-22253-22255-22261
ER-11 3" .748" ER-16 2.76 1.260 ER-16 4 1.260 ER-20 2.76 1.380 ER-20 4 1.380 ER-32 2.76 1.970 ER-32 4 1.970 ER-40 3.15 2.480
SALE!
CAT 40 V-FlangeER Collet Chucks FEATURES:
• 3x more holding power than other chucks.• Holds non-standard shank sizes up to 1/2".• Replaceable chuck is held by a drawbolt.• Powerful drawbar holds chuck tight.
CAT V-FlangeKeyless Drill Chucks
CAT 40 V-Flange1/2" Drill Chuck(L) Proj. 4" / (D) Dia. 2.5"Part No. 7-520-22403Reg. Net Price $216.75
$19508
CAT 50 V-Flange1/2" Drill Chuck(L) Proj. 4" / (D) Dia. 3.87"Part No. 7-520-22405Reg. Net Price $266.05
$23945
The "BRINEY ZERO CHUCK" has only (.750) of gage length to help machine parts or fixtures that are too close to the machine spindle head for stub or standard gage length collet chucks. What makes this chuck so different isthat the collet sits into the holder past the flange area and into the taper shank. The collet is held in place with a "ZERO CHUCK NUT" that has an external thread on it to seat into the flange. The only projection from the gage line is the length of the flange (.750) and the tool being used for machining.
CAT 40V-Flange ER-32 Zero Chuck
Part No. 7-525-4555Reg. Net Price $210.00
$18900
5C Collet Rack
Part No.1-588-130
$1800
FEATURES:• Holds up to 30 collets.• Baked enamel finish for easy cleaning and protection.• Can be hung on wall or can be set on shelf, or work bench.• Dimensions: 9x12", 5-1/2" high at one end and 2-1/2" at the other.
FEATURES:• Ground tapers ranging from AT2 to
AT3 for maximum spindle contact.• Concentricity of .0002 or less from the tool shank to bore.• Certified 8620 Material.
FEATURES:• Operate the same as the rectangular chucks and are of the same construction with poles running off the edge.• Top plates on all models are of magnetic steel and nonmagnetic stainless furnace brazed construction.• Ideally used on lathes, grinders and other machinery with rotating spindles.
• To withstand the high torque of heavy lathe cuts, dowel pins or screws may be inserted in the top plate.• Chuck top plates may be machined for work with odd configurations or an auxiliary plate may be added and removed for other
work, leaving the original plate intact.• The ST series is not water-tight and should not be used with coolant.
High Power Rotary Chucks
ST2 1/2R* 2-5/8" 2-9/16" 1-7/8" 1/8" 1-1/2 ST4 1/8R* 4-3/16 4-1/8 2-3/16 1/4 5 ST5 1/4R* 5-3/8 5-1/4 1-5/16 3/8 7-1/2 SP6R 6-5/16 6-3/16 2-13/16 3/8 15 SP8R 8-1/8 8 2-13/16 3/8 27 SP12R 12-1/8 12 3 3/8 63
$249.00285.00352.00800.00
1188.002341.00
Model Pole Weight Part No. Reg. No. A B C Space (lbs.) 8-302- Net Price
-055-056-057-058-059-060
Dimensions In Inches
* Swing-Type Shutoff
$224.10256.50316.80720.00
1069.202106.90
NOW!
REMOVABLE HANDLES
StandardPole
Major Credit Cards Accepted:
WORK HOLDING
13Shop Online or Fax Orders 24/7 — All Tools... All The Time.
Part No. 1-549-320Reg. Net Price $126.50
$9900
FEATURES:• Fine pitch, V-thread lead screw for precise movement.• Fixed jaw is grooved horizontally
and vertically for convenience in holding round pieces.
SPECIFICATIONS:Jaw Width ............................... 3"Jaw Depth ........................ 1-1/2"Jaw Opening .......................... 3"Bolt Lugs .............................. 1/2"Height ............................... 2-5/8"Weight ................................ 8 lbs.
Drill Press Vise with Lugs
®
FEATURES:• Great for holding wood, metal and tubing.• Magnetic back mounts securely to jaw.• Non-magnetic front.• Designed to fit any
3" - 6" vise jaws.
Multi-Grip Vise Jaws
Jaws are sold in pairs!
Part No. 1-550-21111Reg. Net Price $19.15
$1724
4" Self-Centering Vise
Designed to provide reliable, consistent workholding for your manufacturing needs!
Part No. 1-903-RWP502Reg. Net
Price $1,880.18
$1,69000
$175SAVEOVER
SPECIAL KBC
FEATURES:• Has clamping rails as an alternative mounting option when utilizing swing clamps to hold your
workholding products to the machine table/pallet.• Centering Tolerance: ±0.0005"• Segment screw for added rigidity.• Utilizes 2 dowel pins: one for centering and one for locating.• Jaws adjust from either end of vise to automatically position work piece in center of vise.• Repeatability: 0.001"
SPECIFICATIONS:Jaw Width .............................................. 3.94"Jaw Height .............................................. 1.01" Max. Jaw Opening .......................... 2.5"/5.62"*Vise Length ............................................ 6.49"Bed Height ............................................. 1.96"Max. Clamping Force ...................... 4,000 lbs.Weight ................................................. 14 lbs.
* Jaws may be reversed for larger 5.62" opening.
® FEATURES:• For added durability, bars & locking mechanisms are hardened & ground.• The unique top locking lever can be raised or lowered to tighten or loosen against the workpiece.• Recessed parallel steel jaw inserts level work, and can be removed to accommodate your jig and fixture components.• The base is designed for clear through drilling applications.• 2 Year Warranty.
A simple push or pull on the center bar knob sets the jaw in position. Then any easy press on the locking lever cams the jaw ahead 3/32", exerting a holding pressure that is adjustable from 400 lbs. to 1,100 lbs.
Cam Action Drill Press Vises
Jaw Jaw Jaw Weight Part No. Reg. Width Opening Depth Height (lbs.) 1-550- Net Price
3" 3" 1-1/4" 2-3/4" 10 4 4-11/16 1-5/16 3-1/4 18 6 6-3/16 1-13/16 3-3/4 34 8 8-3/16 2 4-7/16 51
-1203-1204-1206-1208
$181.90198.90348.50433.50
$145.52159.12278.80346.80
SALE!
The Touch Off Gage allows you to standardize the way tool offsets are measured in your shop.To use this gage just lower the tool down onto the contact face until the indicator reads zero. At that point the tool tip is exactly 4 inches from the surface the Touch Off Gage is sitting on.
FEATURES:• Accurately establishes tool length offsets for CNC milling machines. • The contact face is lightly spring loaded to protect against overrun. • Contact face diameter is 0.250". • The rectangular base and recessed indicator face allow it to fit between vise jaws on a pair of parallel bars. • Offset height 4" (101.6mm). • Large 2.2" easy to read indicator face. • Easy calibration check using 1-2-3 blocks. • Gage graduations 0.001". • Gage repeatability 0.0002". • Body and contact face are made from red anodized 6061-T6 aluminum. • Padded case and manual included.
Part No. 1-811-52000Reg. Net Price $124.99
$9999
Touch Off Gage
6" Jaw WidthWeight: 65 lbs.
Part No.1-5721-DX6SK
Reg NetPrice $635.51
$54018
DX6™ Crossover™ Vise
FEATURES:• DX6™ CrossOver™ vise is a combination of AngLock®, Pull-Type and 4 bolt stationary jaw design. – AngLock® design reduces stress on body during clamping. – Pull-type design reduces stress on body during clamping. – 4 bolt design reduces stationary jaw deflection and alleviates body stress.• Large 9" jaw opening.• Repeatability within .001".• Bed height matched to size 2.875" (73.025mm) ±.0005".• Hardened vise bed/jaw plates.• Chip evacuation straight through the body.• GrooveLock jaw plate and workstop included.• 80,000 psi ductile iron body, nut & movable jaw.• New brush seal design makes it easier to replace.• Fits on D50-4-SA swivel base.
FREEIncludes 4 Pc. Setof Kurt Speed KnobsFor Tool-Free Jaw Plate Changes!
$20.00Value!
PermanentRectangularMagneticChucks EconomyGrade
FEATURES:• Magnetic Pull - 88lbs/40kg.• Solid top & bottom plates assure retained accuracy.• Standard pole type.• Positive hand release.
Approx. Part No. Reg. Size Weight 9-600- Net Price
$198.00257.40355.10491.40658.80994.80
4"x 7" 15 lbs. 5 x 10 22 6 x 12 33 6 x 18 50 8 x 18 73 8 x 24 97
-047-510-612-618-818-824
$168.30218.79301.84417.69559.98845.58
SALE!
Call: 1-800-521-1740 Fax: 1-800-322-4292 Web: KBCTools.com
ABRASIVES
14
FEATURES:• Discs are designed to resist loading, extending service life.• Continuous supply of mineral in abrasive-filled bristles provides a high cut rate and more uniform finish.• Flexible yet durable bristles conform the work piece without damaging base material.
Scotch-BriteTM RolocTM Bristle Discs
Max. Part No. Reg. Net Size Grit Color (RPM) 1-630- Price/Disc
$8.45 8.45
8.45
-18730-18732-18733
2" 2 2
50 Green 25,000 80 Yellow 25,000 120 White 25,000
$7.61 7.61
7.61
NOW!
2" Type "R" Rol-On Disc HoldersType "R" Quick-Change Interchangeable with 3M ROLOC®
Medium DensityPart No.
1-613-11275
$5511/4" SHANK
FEATURES:• Standard tool for maintenance departments, machine shops.• Easily used for hand applications.• Flexible material, fast cutting action.• Use what you need to reduce waste.• Ideal for lathe work when sanding to precise size.
For use on Ferrous, Non-Ferrous, Stainless, Plastics, Rubber, Composites.
SHUR-KUT® Shop Rolls1" x 50 Yards
FLEXIBLE "J" WT. RESIN CLOTH - A/O
$25.6424.3823.6023.6023.6023.6023.6023.60
Part No. Reg. Grit 1-613- Net Price
-12107-12108-12109-12110-12111-12112-12114-12115
6080
100120150180240320
$23.0821.9421.2421.2421.2421.2421.2421.24
NOW!
Part No. 1-613-28802 Reg. Net Price $62.37
$5301
Cartridge Roll Assortment Kit
CONTENTS:Each kit contains 120 pcs. ofthe most popular sizes of straightcartridge rolls and full tapered rolls from 1/4" to 1/2" dia. in both 1" and 1-1/2" lengths. Grits are 80 and120 resin bond. Also includedare 2 mandrels with 1/4" shank.
PREMIUM A/O "X" WT.RESIN BOND CLOTH
FEATURES:• Consistent diamond structure and shape: - Repeatable dressing performance.• Well defined sharp diamond point: - Durable; maximum cost effectiveness for dressing conventional abrasives.• Steeper 60° angle head design: - Greater machine and part clearance produce forms with tighter tolerances.
The best selection when aresetting program is not feasibleor low initial cost is the primarypurchasing consideration.
Conventional Diamond Single Point Truing/Dressing Tools
Straight Tapered Convex
Wheel Forms
NOTE: THESE TOOLS CANNOT BE RESET.
Product Wheel Tool Part No. Reg. Number Diameter Carat Wt. Dia. 1-632- Net Price
1/5
1/4
1/3
1/2
3/4
1
InternalWheel
Up to 7"
8" to 10"
11" to 14"
15" to 20"
21"+
BC1M6BC1M7BC2M6BC2M7BC3M6BC3M7BC5M6BC5M7BC7M6BC7M7BC10M6BC10M7
-92001-92007-92002-92008-92003-92009-92004-92010-92005-92011-92006-92012
$40.7039.8046.2046.2050.2551.3561.2061.2092.7592.75
132.55132.55
3/8" 7/16 3/8 7/16 3/8 7/16 3/8 7/16 3/8 7/16 3/8 7/16
$36.6335.8241.5841.5845.2346.2255.0855.0883.4883.48
119.30119.30
SALE!
India Square Abrasive Files
INDIA FILES: Smooth cutting aluminum oxide abrasive. Ideal when a close tolerance is moreimportant than the speed of cut.
Applications range from dimensioning keyways to maintain fit, stoning faces on router bits, touching-up edges of reamer teeth, & lapping/honing to close tolerance to produce the finest edge on precision instruments, die work and delicate tools.
Part No. Size Grit 1-632-
4"x 1/4" Medium 4 x 1/4 Fine 4 x 3/8 Medium 4 x 3/8 Fine 4 x 1/2 Medium 4 x 1/2 Fine
-86070-86065-86085-86080-86100-86095
$7.907.908.008.008.058.05
ONLY!
ALUMINUM OXIDE
Mill Files Bastard Cut
FEATURES:• Single cut on edge and sides.• File tapers toward the point for detail.• Two square edges.
Very adaptable file that can be used for a multitude of applications such as sharpening various types of tools and saws, draw filing, lathe work and general shop use.
$5.515.516.648.51
13.90
4" 6 8 10 12
-08243-08354-08497-08642-08737
12121212
6
Per Part No. Size Box 1-552- ONLY!
KK711X (X-weight)Aluminum Oxide FullResin Cloth is recommendedfor heavy-duty grinding &deburring of all non-ferrousmetals, steel, cast iron, plastics or composites. Use forsanding plywood, particle board, or any wood product application.
Premium GradeCloth AbrasiveBelts
Quality Coated Abrasives
NOTE: A polyester backing makesit possible to use product as waterproof in 60 & 80 grits.
$2.29 2.12 2.47
3.41 2.45 3.45 9.97 9.50 9.17
Reg. Net Belt Size Grit Part No. Price/Ea.
1-6094-0051-6095-0051-609H-0051-6094-0101-6095-0101-609H-0101-6094-0451-6095-0451-609H-045
60 1"x 42" 80 120 60 2 x 48 80 120 60 6 x 48 80 120
$1.95 1.80 2.10 2.90
2.08 2.93 8.47 8.08 7.79
NOW!
Major Credit Cards Accepted:
ABRASIVES
1599% of All Orders Ship the Same Day!
AZ Surface Grinding Wheels
VITRIFIED BONDED - AZ:Premium Blue Aluminum Oxide.Particularly suited for grinding HSS over 55RC. Specially recommended for grinding heat sensitive steels like aluminum and stainless steels. It grinds with an exceptionally cool cutting action. Requires minimum dressing.
7" x 1/2" x 1-1/4" - 3,760 RPM Part No. Reg. Net Grit 1-595- Price/Ea.
$14.8514.8514.8214.8214.8214.8214.8214.82
$12.6212.6212.6012.6012.6012.6012.6012.60
-34318-34319-34320-34321-34323-34324-34325-34326
46-H 46-I 46-J 46-K 60-H 60-I 60-J 60-K
NOW!
Combination Grit.Premium silicon carbide abrasive. Fast cutting stone; ideal for general sharpening of cutting tools. Fast stock removal for quick edge sharpening with minimal loading.6" x 2" x 1" Coarse/Fine.Part No. 1-632-85450Reg. Net Price $29.55
$2512
Machine Knife StoneOffer both coarse and fine sides for sharp-ening and honing paper and cloth-cutting knives and planer knives on the machine. The groove around the middle of the stone protects fingers and provides a secure hold. 4" Dia. x 1-1/2" Thick.Part No. 1-632-87570Reg. Net Price $40.70
$3460
Bench StonesCRYSTALON (Silicon Carbide)
Each kit contains 35 of the most popular SHUR-KUT® quick change discs and SHUR-BRITE® surface conditioning discs.
CONTENTS:• (5 ea.) Quick change discs in A/O 36, 60, 80 and 120 grit. • (5 ea.) Surface conditioning discs in coarse, medium and very fine.• (1) Medium density holder with 1/4" shank.
SHUR-KUT® / SHUR-BRITE®
Combo Disc Kit
2" Type "R"Part No. 1-613-32056Reg. Net Price $38.64
$3284
Quick Change 2"Laminated DiscsALUMINUM OXIDE (A/O)
SocAtt® features an all-metal attachment on the holder padand disc to ensure a safe,secure, durable fit.
FEATURES:• Ideal for flat or contour surfaces.• Most commonly used are grits
36-50 for weld removal. Grits 60-120 for removal of
imperfections and blending.• General purpose grinding,
deburring, and blending on ferrous metals.
$.75.72.68.65.63.62.62.62.62.62.62.62
-522401-522402-522403-522404-522405-522406-522407-522408-522409-522410-522411-522412
Part No. Reg. Net Grit 1-631- Price/Disc
24 36 40 50 60 80 100 120 150 180 240 320
$.68.65.61.59.57.56.56.56.56.56.56.56
SALE!
MUST BE PURCHASED IN PACKS OF 100.
Interchangeable with 3M Roloc TS discs, Merit Type II Twist-On, Norton Speed-LokType "S" Turn-On
2" Disc HolderWITH 1/4" SHANK
Part No.1-613-11173
$551
TYPE "S"
Straight & CircularEnd Wire Brushes1/4" Shank
STRAIGHT END BRUSHES - Crimped
Wire Trim Part No. Reg. Dia. Size Length 1-621- Net Price
1/2" .006" 1" 1/2 .010 1 1/2 .014 1 1/2 .020 1 3/4 .006 1 3/4 .010 1 3/4 .014 1 3/4 .020 1 1 .006 1 1 .010 1 1 .014 1 1 .020 1
$7.855.955.605.20
10.407.407.106.75
13.658.608.308.05
-015-016-017-018-019-020-021-022-023-024-025-026
$6.675.064.764.428.846.296.045.74
11.607.317.066.84
SALE!
General purpose for working hard to reach places. For use on portable 1/4" dia. air and electric tools. Used for rubber and plastic flash removal, paint and rust removal, die, mold and tool polishing.
CIRCULAR END BRUSHES - CrimpedProvide lighter brushing actions & superior finish when cleaning, removing rust and paint, smoothing, descaling, cleaning fettling from cast seams, light deburring.
Wire Trim Part No. Reg. Dia. Size Length 1-621- Net Price
1-1/2" .006" 7/16" 1-1/2 .012 7/16 3 .006 1 3 .014 1 3 .020 1
$11.4010.4514.9511.5511.20
-031-032-034-035-036
$9.698.88
12.719.829.52
SALE!
Part No.1-457-370Reg. Net
Price $34.50
$2588
Heavy Duty Deburring & Scraping Kit
SET INCLUDES:• Mango II Handle• Holder E• Holder C• Blades: E100P, E111, E200, E300,
E600, E700, C42• C Key
diamond
Diamond Hone & Stone
Handle Part No. Grit Color 1-609-
Super Fine (1200) Blue Fine (600) Red Medium (400) Purple Coarse (250) Black Extra Coarse (150) Green
-LSF-LF-LM-LC-LXC
$4.854.856.057.258.90
ONLY!
Set of 5: Super Fine, Fine, Medium, Coarse & Extra Coarse
BUY THE SET & SAVE!Part No. 1-609-LPAK5Reg. Net Price $28.30
$2547
FEATURES:• 3/4" x 2" diamond pad on a 6" x 3/4" plastic handle.• Very effective in hard to get
to places, carbide table saw blades, router bits, deburring.
N Tele Set
Deburrs steel, aluminum, plastic, brass and cast iron.
Model NG8300Part No. 1-457-552Reg. Net Price $13.25
$1193
SET INCLUDES:• NogaGrip 3 handle.• N holder.• 5pcs. N1 blades• 5pcs. N2 blades.
Call: 1-800-521-1740 Fax: 1-800-322-4292 Web: KBCTools.com
MEASURING INSPECTION
16
FEATURES:• Direct inch/metric conversion.• Stainless steel frame.
• Large easy-to-read LCD display.• Patented ceramic
capacitive sensor.
• Resolution: .0005" (.01mm)• ABS/INC measurement.• Includes molded case.
External Internal Part No. Reg. Range Jaw Length Jaw Length Thickness 54-100- Net Price
1.56" .635" .117" 2.40 .930 .125
$118.72173.15
-000-112
0-6" (0-150mm)0-12" (0-300mm)
$89.04129.86
SALE!
Economy Digital Calipers
Wireless TransmitterFor Economy Calipers & IP54 Calipers
FEATURES:• Includes 1 USB receiver and 1 Transmitter (good for 1 tool).• Audible as well as LED indications when data is sent.• Input into Excel, Word, Notepad and CAD programs with the press of a button.• Simple plug and play operation.• Wireless technology allows the use of the tool up to 60' away from a computer.• Includes 1 spare battery (CR2032), instructions, and storage case.
Part No. 54-115-100Reg. Net Price $101.49
$8750
The Wireless Transmitter allows wireless input form Economy and IP54 Economy Calipers as well as Indi-Max Indicators. Input directly into Excel, Word, CAD and Notepad.
FEATURES:• IP67 means it's immune to coolants, dirt, grit, and chips.• Certificate of inspection provided on 6" & 8" models.
0-6" (0-150mm) .0005" (.01mm) 0-8" (0-200mm) .0005" (.01mm) 0-12" (0-300mm) .0005" (.01mm)
-500752-500753-500754
$209.00280.00484.00
No SPC Output
Part No. Reg. Range Resolution Remarks 1-808- Net Price
$177.65238.00411.40
NOW!
ABSOLUTE Coolant Proof CalipersSeries 500 w/ ABSOLUTE Encoder
Ultra-Cal VElectronic Caliper
FEATURES:• Hold function.• Direct RS-232 output.• 4-way measurement; inside, outside, depth & step.• Resolution: .0005" (.01mm)• Repeatability: .0005" (.01mm)• Maximum error: .001" (.02mm)• Temperature range 5 to 40° C working, -20 to 60° C in storage.
• Direct inch/metric conversion.• Dust, water & oil resistant to
IP67 even with the proximity cable connected.
• Hardened stainless steel construction.• Features absolute/relative measuring modes.• Includes molded case.
Range: 6" (150mm)Part No.
54-100-067Reg. Net
Price $202.56
$15192
Quick Check Portable Hardness Tester
FEATURES:• Pocket Size - Length: 9"+, Weight: 4 oz. No moving parts to get out of adjustment.• Convenient for hardness testing on your surface plate, your work bench or office desk.• Covers the entire range of heat treated steel from 20 Rc to 65 Rc hardness of the Rockwell C scale.• The piece to be checked should have a section size of 1" square or more and at least 1/2" thick.• Precise reading in Rockwell C scale - Pretested for positive release and dependable accuracy.• Will not mar the surface of heat treated parts.
SPECIFICATIONS:Accuracy ................. +/- 2 Rockwell pointsLength ................................................. 9+"Weight .............................................. 4 oz.
A quick and easy checking gage for flat workpieces. Ideal for spotor production checking.
Part No.1-820-17295Reg. NetPrice $245.00
$20825
OptiVISOR® Binocular Magnifiers
Precision binocular headband magnifier offering hands-free efficiency and eye-strain reduc-tion. Can be worn with or without glasses by anyone requiring close accuracy in their work. Ground and polished optical lenses.
DONEGAN
$60.3060.3066.30
2.00X 10" 2.50X 8 3.50X 4
-DA-4-DA-5-DA-10
Focal Part No. Reg. Power Lgt. 1-700D- Net Price
$51.2651.2656.36
SALE!
Bore Gage Setting Master Kit
SETTING DEVICE:• Depth Capacity: 1"• Internal Capacity: 6"• Base Anvil: 2.750" x .80"• Centralizer Capacity Width: 2.625"• Adjustable Anvil. 2.375" x .375" (2 ea.)• Quick-release holder for fast adjustment.
36 PC. ECONOMY GAGE BLOCK SET:• Tolerance to .00005"• Certificate of calibration to N.I.S.T.
Accurately set any bore gage up to 6" in diameter to an accuracy of .0001".Bore Gage Not Included.
Part No. 53-646-000Reg. Net Price $246.20
$19696
FEATURES:• Accurately and quickly locates center on round workpiece.• Place the tool in drill chuck or
collet and line up pointer with line scribed on shaft.
SPECIFICATIONS:Shank Diameter ........... 3/8"Overall Length ......... 4-1/8"
Center Finder
Part No. 1-397-730
$920
Major Credit Cards Accepted:
MEASURING INSPECTION
17Subscribe @ KBCTools.com to Get Exclusive Email Offers.
Multi-Use Rule & Gage
Part No. 1-805-16Reg. Net Price $11.15
$1004
Made of stainless steel. Has a 4" rulegraduated in 32nds and millimeters.Used as a drill point gage, a square, bevel protractor and center finder;has a tap and drill table.
FEATURES:• Tool can also be used as a plain rule, hook rule, depth gage, and slide caliper.• The hook rule has accurate, machine divided graduations in 8ths, 16ths, quick reading 32nds & 64ths.• Hook is adjustable and can be shortened or extended to either side of the rule, and may be removed if desired.• The head is beveled to 59O, and is also graduated in 32nds along the 59O face for measuring the drill tips which should be of equal lengths.• The sliding head may be adjusted to any position along the rule and locked by a thumb nut.
Starrett #22CPart No. 1-855-50150Reg. Net Price $69.00
$6210
Drill Point Gage
81 Pc. Rectangular Gage Block Set
FEATURES:• Accuracy ±.00005".• Certificate of calibration
traceable to NIST.• Inspected according to meet
NIST Federal Specification ASME B89. 1.9 - 2002
tolerances on length for inch gage blocks.• High-quality fitted wood case.
Fowler "Economy/Workshop" grade GageBlock Sets are identical to our standardsets in all respects, except for the widerrange of tolerance which is more thanadequate for a majority of shop needs.Blocks are rectangular, constructedof the finest grade of high carbon/chrome steel, fully stress relieved,hardened to 65 RC, lapped andmirror polished to a very low micro-surface finish. Blocks feature a lowcoefficient of thermal expansion,and they are carefully inspected foraccurate size, parallelism and flatness.
Part No. 53-672-081Reg. Net Price $230.80
$17310
SET INCLUDES:• 9 Blocks .1001" - .1009" (Steps of .0001")• 49 Blocks .101" - .149" (Steps of .001")• 19 Blocks .05" - .95" (Steps of .05")• 4 Blocks 1" - 4" (Steps of 1")
Gage Pins & Sets Minus Tolerance
FEATURES:• No sharp edges.• All members 2" long.• Material: 52100 Bearing Steel.• All gages & sets are traceable to N.I.S.T.• Size & serial number laser etched on each piece.
Class Z• Size Deviation: .0001"• Surface finish 8 micro.• Roundness Geometry: .00005".• Class Z gage pin will meet or exceed the requirements of Class ZZ in any situation or application.
M-0 .011-0.060" 50 M-1 .061-0.250 190
-002-006
$81.82184.09
$73.64165.68
SALE!
Gage No. of Part No. Reg. Set Range Members 1-8091- Net Price
USES:• Checking locations.• Setting micrometers.• GO & NO/GO gaging.• Measuring hole sizes and depth.• Checking distances between holes.
FINISH:• Center-less lapped.• All English gages with .0001" limit.• Heat treated to a hardness of 60-62 Rockwell C.• Each gage is inspected and has a 8 microfinish or better.
6" Extended Range Dial Bore Gage Set
FEATURES:• Range: 0.7-6" (up to 10" deep).• Accuracy: 0.0005" with crisp precision graduations.• Carbide tip on plunger.• Full set of attachments and parts included.• 1 Year Warranty.
Supplied in a protective case.
Part No. 1-815-400Reg. Net Price $157.40
$9995
Special Introductory Offer!
Part No. 1-808-329350Reg. Net Price $590.00
$50150
FEATURES:• Range: 0-6" (0-150mm)• 6 interchangeable rods, with lapped measuring end.• Rod Length Adjusted In: 1" (25mm) increments.• With measuring rod clamp.• Base: 4" x .63"• With SPC output.• With ratchet stop.• Automatic switch OFF.
Suppliedin fitted case.
Electronic Depth Micrometer Series 329
With White Face IndicatorPart No. 8-135-0010Reg. Net Price $32.40
$2754
SET INCLUDES:• Dial Indicator: 1"• Dial Reading: 0-100• 22 Pc. Indicator Point Set• Mini Mag Base
3 Pc. Set-Up & Inspection Kit
Supplied inplastic case.
Call: 1-800-521-1740 Fax: 1-800-322-4292 Web: KBCTools.com
MEASURING INSPECTION
18
FEATURES:• 4-48 Thread.• Tolerance markers.• Solid brass housing.• Popular AGD 2 Series.• Supplied with lug back.• Carbide tipped contact points.• Meets ANSI specs for accuracy.
Dial Indicator
Part No. 52-520-110Reg. Net Price $29.70
$2525
SPECIFICATIONS:Graduation ................... .001"Range ................................ 1"Dial Reading ............... 0-100
FEATURES:• Horizontal & vertical mounting positions.• Articulating arm with powerful central locking knob, provides full 360O horizontal positioning and over 180O vertical positioning.• Positive ON/OFF switch.• Small but powerful magnetic base, with 70 lbs. holding force.• Will hold any indicator with a 3/8" stem or standard dovetail mount.• Very sensitive fine adjustment thumb screw.
SPECIFICATIONS:Base ............................. 1-3/16" x 1-9/16" x 1-3/8"Max. Horizontal Reach ................................ 4-3/4"Max. Vertical Reach .................................... 7-1/2"
Universal Indicator Holder With Triple-Jointed Arm
The compact and versatile 660 Magnetic BaseIndicator Holder has 3 adjustable pivots controlledby a single knob, for fast, easy indicator positioning.
Starrett #660Part No. 1-855-68621
Reg. Net Price $132.00
$10560
FEATURES:• Range: 0-12" (0-300mm).• Resolution: .0005" (0.01mm)• Accuracy: .001"• SPC data output.• Easy-to-use standard type.• Double-column structure ensures high measuring accuracy.• Carbide-tipped scriber is provided.• Includes: Carbide Scriber and 2 Scriber Clamps• Functions Include: Zero-Setting, ABS/INC Switching, 2-Presets, Probe Tip Diameter Compensation, Power ON/OFF, Data Hold, -/+ Switching, Inch/mm Conversion, Alarm (Low Voltage, Counting Valve Composition Error).
Digimatic Height Gage
Part No. 1-808-192630Reg. Net Price $1,540.00
$1,30900
FEATURES:• Chrome-plated.• Caliper type jaws.• Carbide measuring faces.• Ratchet stop for exact
repetitive readings.
Inside Micrometers
Provides accurate smallinternal measurements.
Supplied with a fitted case.
$46.1555.55
Setting Part No. Reg Range Graduation Ring 1-812- Net Price
0.2-1.2" .001" w/ Standard 0.2" 1-2" .001" w/ Standard 1.0
-215-220
$39.2347.22
SALE!
2 Pc. Combination Square Sets
Series 11H - Regular Blade
GRADUATIONS:No. 4R - 8ths, 16ths, Quick Reading 32nds, 64ths
Starrett Part No. Reg. Size Graduation Number 1-855- Net Price
6"12
-50051-50055
11H-6-4R11H-12-4R
No. 4RNo. 4R
$82.0084.00
$69.7071.40
SALE!
FEATURES:• With reversible lock bolt, scriber, spirit level, and hardened steel, machine divided blade. Cast iron heads with black wrinkle finish.
Toolmaker’s V-BlocksA precision-made set for toolmakers and machinists. Made of hardened tool steel, machined and ground to close tolerances. Blocks are approximately 1-1/4" sq. & 1-5/8" long. 1" dia. clamping capacity.
Two Blocks & Two ClampsPart No. 1-805-117Reg. Net Price $29.95
$2396 FEATURES:• Work surfaces may be located easily and accurately.• Body and contacts are made of tool steel, hardened
and ground lapped to close tolerances for diameter
and concentricity.
Single EndEdge Finder
Starrett #87APart No. 1-855-53062Reg. Net Price $27.50
$2338 SPECIFICATIONS:Body Dia. ............................. .375"Contact Dia .......................... .200"
FEATURES:• Carbide faces.• Positive locking clamp.• Baked-enamel finished frame.• Clear graduations of satin-chrome finish.
Series 103
0-3" Outside Micrometer Set
Part No. 1-808-103929Reg. Net Price $391.00
$33235
Mitutoyo Range Grad. No. Remarks
0-1" .001" 103177 1-2 .001 103178 2-3 .001 103179
SET INCLUDES:
Ratchet stop w/
standards
Series 192
Sheet Metal Gage
FEATURES:• Hardened and tempered tool steel.• For gaging uncoated sheet, plate iron & steel.• 1/8" thick & 3-1/4" diameter.• Measures from 0 to 36 or decimal equivalents on reverse side.
Part No. 1-804-5058Reg. Net Price $27.05
$2299
U.S. STANDARD
FEATURES:• All leaves clearly marked with size.• Made of high quality polished tool steel.• Quickly determine the pitch of various threads.• Locking device at both ends to securely lock the leaves.
Screw Pitch Gages
$3.923.92
11.12
Part No. Reg. Range Pitches 1-999- Net Price
$4.904.90
13.90
4-42 TPI 31 .25-2.5 MM 28 4-84 TPI 51
-005-010-015
SALE!
Major Credit Cards Accepted:
MEASURING INSPECTION
19Industrial Metalworking Tooling & Solutions Since 1965.
6" pocket combination square. Bladegraduated in 8ths and 16ths on one side,16ths and 32nds on the other side.
Part No. 1-930-10227
$685
Pocket SizeCombination Square With Scriber & Level
FEATURES:• 5-axis holder.• Black finished arms.• Instant fixation in any position.• Powerful magnet with on/off switch.• Universal swivel clamp holds a 6mm, 8mm, 3/8" stem, dovetail or back lug.• Central locking mechanism with NOGA
designed spring loaded bearing.• Fast and easy to set up gauges.• Magnet Pull: 176 lbs./ft.• Arm Length: bottom - 4.33", top - 3.98"
Universal Magnetic BaseWith Fine Adjustment On The Top Clamp
Model No.DG61003Part No.
1-457-909Reg. Net
Price $103.55
$8284
Due to its stability and ease of use, the NOGA Universal Magnetic Base hasbecome the industry’s most wanted.
Electronic DigitalIndicatorSeries 3600 - AGD Group 2
Inch/MetricConversionStarrett #3600-5Part No.1-855-68813Reg. NetPrice $186.00
$15810
FEATURES:• Power ON/OFF.• Long battery life.• Dust cap.• AGD group 2 size.• Range: .500" or 12.7mm• Large, easy-to-read LCD.• Zero setting at any position.• Resolution: .0005" or .01mm• Reverse travel (± control indicates direction).• Stem Diameter: 3/8".• 4-48 spindle thread.• Lug-on-center back & additional flat back.• Plastic storage case with clear cover.
Machinists’ Improved LevelsSeries 98 with Ground & Graduated Vials
FEATURES:• Ground and graduated main vials.• Adjustable to a positive setting.• Base of the levels feature an involute groove running the length of base, providing a reliable seat for round work.• With the cross test level, it’s possible to simultaneously level in both directions.• Case not included.
Starrett Part No. Reg. Inch mm Description No. 1-855- Net Price
Size
4" 100 6 150 8 200 12 300
Without Cross Test VialWith Cross Test VialWith Cross Test VialWith Ground Single Plumb Vial and Cross Test Vial
-50440-50441-50442-50443
98-498-698-898-12
$114.00135.00167.00233.00
$96.90114.75141.95198.05
SALE!
Dial IndicatorsGroup 2
FEATURES:• Continuous Dial.• 2-1/4" Dia. Face.• Satin-finish chrome plated forged brass case.• Precision ground hard chrome plated stem.• Accuracy meets Federal Specifications.• Contact point is made of hardened, ground and chrome plated tool steel.• Spindle rack, pinions and pivots of hardened stainless steel.
MITUTOYO offers dial indicators in a variety of AGD Series, with inch and metric graduations. These instruments conform to the three specifications governing dial indicators. The scope of available ranges and graduationsis such that MITUTOYO is, now, one of the largest producers of dial indicators.
Dial Indicators are furnished with a lug-on-center back, mounted vertically. The majority of thebacks can be mounted horizontally if required.
SPECIFICATIONS:One Rev. Range ..................................... .050" Range .................................................... 1.000"Graduation ............................................ .0005"Dial Reading ........................................... .0-50
Part No.1-808-2776S
Reg. NetPrice $142.00
$12070
6 Pc.Telescoping Gage Set
FEATURES:• Satin chrome finish.• Locking mechanism con-
sists of a knurled screw at the end of the handle.
• Contact plungers auto-matically self center at all times and in all positions.
• Measures the true size of holes and slots.• Plungers are locked at any desired setting.• Contact ends are hardened & radius
ground providing clearance for insertion
into a smaller hole.
Range: 5/16" to 6" Part No. 1-804-508Reg. Net Price $95.65
$8130
1 Dovetail Fits All Indicators(1) 5/32" Dia. Hole At An Angle(1) 1/8" Hole Inside Dovetail(1) 1/4" Hole (3) Pivot Points
Axial SupportBracket
Part No. 1-850-Z9610SS
Reg. Net Price $22.20
$1887
STAINLESS STEEL
FEATURES:• Used for mounting indicators with dovetails or rods.• 3/8" diameter body for
secure clamping, with 5-1/2" overall reach.
Extended Range Dial Calipers
Jaw Part No. Reg. Range Depth 52-008- Net Price
$222.60272.05
0-18"0-24
3.125"3.375
-018-024
$178.08217.64
SALE!Includes afitted case.
FEATURES:• Depth rod.• Black dial face.• Revolution: .100"
• Graduations: 0.001"• Stainless steel construction.• Internal Measuring Nibs: .500"• Satin chrome finish.
6" Stainless Rules
15/32" width one sided,graduated in mm & 16ths.Part No. 1-805-305MM
$240
Depth gage pocket clip.Width 1/2" Front: Quick-reading 32nds & 64ths.
Back: Decimal Equivalents.Part No. 1-805-300
$255
Call: 1-800-521-1740 Fax: 1-800-322-4292 Web: KBCTools.com
MEASURING INSPECTION
20
Part No. 1-815-200Reg. Net Price $48.75
$3656
FEATURES:• 3-side magnets (bottom & 2 side walls).• Large LCD display.• Reversible reading.• Precision digital level sensor.• Hold and ZERO functions.• (1) 9V Battery Included.• 1 Year Warranty.
Magnetic Digital Angle Protractor
SPECIFICATIONS:Measuring Range ... 360° (4 x 90°) Resolution ............................... .05°Accuracy ................................ ±.2°Repeatability ............................. .1°Dimensions ......... 2.2" x 2.2" x 1.2"
P.D. Check™ Thread WireAttachmentSystem
The first new breakthroughin measuring threads using the 3 wire method in 35 years!
INSTRUCTIONS:1. Select the Proper Size wires.2. Match the Wire Size with the Proper P.D. Check™3. Slip Two Wires in the Holder.4. Now Place the Holder on the MIC's Anvil.5. Hold the Micrometer in one Hand and the Third Wire in the other.6. Check the Threads.
SET INCLUDES:• .018" - .022" (Purple)• .024" - .032" (Blue)• .040" - .045" (Yellow)• .055" - .063" (Green)• .072" - .081" (Red)
FEATURES:• Fits all MIC's with .245" to .312" Anvils.• No more lost thread wires in the chip pans.• Specifically designed for rapid
and accurate measurement.• Each part fits 2 sizes of wires.
Micrometer Not Included.
Part No. 1-820-16707Reg. Net Price $19.95
$1696
Digit Outside Micrometer
Supplied in afitted plastic case.
FEATURES:• Lock nut.• Ratchet stop.• Graduation: .0001"• Satin chrome finish.• Carbide tipped faces.
Range: 0-1"Part No. 1-812-500Reg. Net Price $36.50
$2738
Shockproof Dial CaliperWith Thumb Roll
FEATURES:• Range: 0-6"• 4-Way measuring.• Tough shockproof design.• .001" (.02mm) reading dial face.• .100" (2mm) range per revolution.• Silky smooth movement throughout.• Accuracy/Resolution/Grad.: .001"• 1 year warranty.
Supplied in a shop-hardened case.
Part No. 1-815-105Reg. Net Price $49.95
$3497
WHITE FACE
STAINLESSSTEEL
Dial Test Indicator& Magnetic Stand SetINCLUDES:• Stem: 3/8"• Knurled Clamp Ring• 513402 Dial Test Indicator.• 7014E Mini Magnetic Stand• Carbide Contact Point: .079"
INDICATOR SPECIFICATIONS:Range ................................................... .03"Graduation ....................................... .0005"Dial Reading .................................... 0-15-0
Indicator OnlyPart No. 1-808-513402Reg. Net Price $130.00
$11050
Part No. 1-808-513907Reg. Net Price $215.00
$17200
INDICATOR FEATURES:• Anti-magnetic.• Jeweled bearings.• Glare-free crystal with scratch-resistant coating.• No-clutch structure.• Water and dust resistant.
FEATURES:• Provided only with a zero-set key for easy origin setting.• A ratchet stop or friction thimble for a constant measuring force.• Measurement readout with large characters on the LCD screen.• No spindle clamp. No data output.• Supplied in fitted plastic case.
SPECIFICATIONS:Range ................................. 0-1" (0-25mm)Graduation ................... .00005" (.001mm)
w/ Ratchet StopPart No. 1-808-293831Reg. Net Price $136.00
$11560
w/ Friction ThimblePart No. 1-808-293832Reg. Net Price $142.00
$12070
MDC-Lite Digimatic Micrometers
Series 513 HorizontalType
Digital Count Dial Height Gage& Surface Plate Set
SET INCLUDES:• Digital Count Dial Height Gage with Dual Directional Counters: 0-12"• "B" 0-Ledge Granite Surface Plate: 12" x 18" x 3"
HEIGHT GAGE FEATURES:• Graduation: .001" Dial Reading Digital Counter.: 0.1"• Double digital counter can be zero-set at any height within range by depressing zero-set button. • Features a large feed wheel for coarse & fine vertical adjustments.• Bottom surface hardened & ground.• Carbide tipped scriber.
Part No. 8-135-9100Reg. Net Price $219.95
$17596
Major Credit Cards Accepted:
MEASURING INSPECTION
21Shop our current Inventory Clearance Deals at KBCTools.com
Part No. 1-397-026XReg. NetPrice $25.20
$1895
FEATURES:• Accuracy to workshop grade.• Square accurate both inside and outside.• Made of finest steel.• Hardened blade.
ThinBlade With Wide Beam
4 Pc. Machinists’ Steel Square Set
Beam Size Length
2" 1-1/2" 3 2-1/2 4 3 6 4
Precision Thin Parallel Set
Part No. 1-812-016Reg. Net Price $60.65 $4852
FEATURES:• Made of high grade alloy steel, hardened and ground, 2 holes in each parallel.• Accuracy .0002" parallelism in height, .001" to size in height.• 10 matched pairs 6" long by 1/8" wide: 1/2", 5/8", 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-3/8, 1-1/2", 1-5/8".
Suppliedin plasticcase.
FEATURES:• Fits all brands.• 60o conical points.• Allen wrench included.• .375" dia. x 2.25" long.• Supplied in hi-impact reusable tube.• Hardened steel with black oxide coating.
Centerline GagesMeasures hole center to hole center quickly and accurately!
Fits 4", 6"& 8" Calipers
Part No.1-850-Z9009
Reg. NetPrice $22.70
$1930
Bore GageInch/Metric
Part No.1-397-35 9
Reg. NetPrice $10.89
$795FEATURES:• Handy gage for measuring cylindrical bores, bearing work and for gaging slots.• Graduation: 1/64" (0.1mm)• Range: 1/32"-5/8" (1-15mm)• Made from polished stainless steel.• Clearly etched graduations for inch on one side and metric on the other.
SET INCLUDES:• Center Gage: 60o
• Screw Pitch Gage: 4 to 84• Radius Gage: 1/32" to 1/4"• Feeler Gage: .0015" to .025"
Machinist Gage Set
Part No.1-397-715Reg. NetPrice $29.90 $1895
FEATURES:• Accurate to within .0005".• 1/2" Dia. Shank, 3-15/16" Length• Includes AAA alkaline battery & bulb.• Quick, precise & lights up instantly when stylus .200" dia. x 1/2" length reaches the work edge.• Exact reading off any electrically conductive metal.
Self-contained visualfor machine set-up.MACHINIST’S MATE
ElectronicEdge Finder
Part No. 1-275-98315Reg. Net Price $24.95
$2121
Pitch GagesFEATURES:• Pitch size is stamped on each gage.• Whitworth, Unified and metric screw pitch gages (60O).• Range (mm): 0.4-7mm & 4-42 TPI. • No. of Leaves: 51.• Composition of Gage: MM: 0.4, 0.5, 0.7, 0.75, 0.8, 0.9, 1, 1.25, 1.5, 1.75, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, & 7. TPI: 4, 4-1/2, 5, 5-1/2, 6, 7, 8, 9, 10, 11, 11-1/2, 12, 13, 14, 15, 16, 18, 20, 22, 24,26, 27, 28, 30, 32, 34, 36, 38, 40, & 42.
Part No. 1-808-188151Reg. Net Price $54.35
$4620
Series 188
Part No. 1-802-44460
$1200
FEATURES:• Graduations in 14ths, 20ths, 24ths & 32nd of an inch.• Shows double depth of threads.• Tempered satin-chrome finish.• 60° angles for Unified, American, Am. National and U.S. Std., threads.
Center Gage
FEATURES:• Base: 4"• Metric/Inch system conversion at any position.• Zero setting at any position.• Resolution: .0005" (.01mm)• With data output interface.• Manual power ON/OFF.
Electronic Digital Depth Gages
Range: 0-6" (0-150mm)Part No. 1-812-305
$6235
Range: 0-12" (0-300mm)Part No. 1-812-315
$9900
FEATURES:• Used for drawing radial lines, transferring angles, & setting bevels.• Head Measures: 3-5/16" x 2"• Measures angles from 0 to 180O.• 6" arm & knurled thumb lock nut.• Blade secured firmly by lock nut at any angle.• Made of tempered steel with satin chrome finish.
StainlessSteelProtractors
Head Part No. Reg. Style 1-804- Net Price
Rectangle Semi-Circle
-17SS-18SS
$15.7015.70
NOW!$13.35
13.35
Call: 1-800-521-1740 Fax: 1-800-322-4292 Web: KBCTools.com
TOOLROOM ACCESSORIES
22
FEATURES:• Maximum safety is available with the integrated
anti-slip system. A set screw that is molded into the sliding arm interlocks with the serration on the rail to prevent the clamp from slipping.
• Corrugated malleable cast iron fixed jaw and sliding arm generate powerful, rigid clamping. Top jaw is press fitted to the rail.
• High quality profiled rail. The profile acts as a reliable reinforcement against torsional
forces, while the serration on six faces additionally prevents the clamp from slipping.
• The smooth running spindle with Acme thread allows for more clamping with less effort.
Malleable Cast Bar ClampsMedium Duty
$34.7539.8542.4047.4548.5056.8577.95
Max. Throat Clamping Part No. Reg. Open. Depth Force (lbs.) 1-820B- Net Price
12" 4-1/2" 18 4-1/2 24 4-1/2 30 4-1/2 16 7 24 7 48 7
-4512-4518-4524-4530-7016-7024-7048
1000100010001000132013201320
$27.8031.8833.9237.9638.8045.4862.36
SALE!
One-Handed EZS Clamps
FEATURES:• Single-handed clamping and spreading of workpieces with up to 445 lb clamping force. • The upper section can quickly convert from clamping to spreading without tools.• EZS extend throat depth right to the outside edge of the pads - power spread across the entire pad. • Ergonomic handle positioned behind the rail, enabling a powerful grip.• Soft pressure caps optimize material protection and secure clamping.• Throat Depth: 3-1/2"
Clamping Approx. Part No. Reg.Capacity Spreading Weight 1-820B- Net Price 6" 12 18 24 36
-EZS15-EZS30-EZS45-EZS60-EZS90
$20.9022.9526.0529.2034.40
6-1/2" - 14"6-1/2 - 206-1/2 - 25-3/46-1/2 - 31-3/46-1/2 - 43-1/2
1.20 lbs1.802.002.302.50
$17.7719.5122.1424.8229.24
SALE!
TOLERANCES:Thickness: ............................... ±.001"Width: ............................. + .000/.005"
0-1 Oil Hardening
Quality Oil hardening, Non-distorting alloy steel. Soft, readyto machine.Packed individually.
Precision GroundFlatstock
$12.157.629.73
11.6913.7115.7119.8023.8427.9231.9935.9944.1052.2122.2110.3712.9315.3417.5820.1225.0729.9334.8644.6654.4964.3219.9514.5917.0520.1220.3326.0532.1838.2644.4550.6256.74
Part Thickness Width No.
1/16"
1/8"
3/8" 1/2 3/411-1/41-1/222-1/233-1/2456 1/8" 1/2 3/411-1/41-1/222-1/23456 3/16" 1/2 3/411-1/41-1/222-1/233-1/24
-638-054-056-058-060-062-064-066-068-070-072-076-078-110-112-114-116-118-120-122-124-126-130-134-136-168-170-172-174-176-178-180-182-184-186-188
3/16"
$15.7514.9318.9622.8126.5730.6338.3246.1253.8361.7369.3684.93
100.5344.5320.3424.9329.5433.8338.3847.5556.6065.7584.03
102.23120.48
54.3827.2532.7238.3043.5849.1460.3671.4082.6193.86
104.92
ONLY! ONLY!
18" Part No. 1-951-
36" Part No.1-965-
$19.0116.5019.9723.5326.7130.3637.1744.1151.0757.9864.9178.8192.6920.6719.8024.0128.0931.9136.0544.2852.5460.7924.4922.5727.3131.9036.1940.9150.2559.4868.8278.1187.38
105.97124.54
28.3334.1139.8045.4451.1762.6773.7285.9997.20
108.71
Part Thickness Width No.
1/4" 1/2 3/411-1/41-1/222-1/233-1/2456 5/16" 1/2 3/411-1/41-1/222-1/23 3/8" 1/2 3/411-1/41-1/222-1/233-1/2456 1/2" 3/411-1/41-1/222-1/233-1/24
-226-228-230-232-234-236-238-240-242-244-246-250-252-256-258-260-262-264-266-268-270-272-286-288-290-292-294-296-298-300-302-304-306-310-312-344-346-348-350-352-354-356-358-360-362
$37.5532.0338.2044.5150.2156.5869.0881.5093.96
106.49118.96143.90175.71
40.5538.3145.7153.0559.7767.2281.8796.57
111.1947.7543.6352.0560.3567.9576.3092.93
109.43126.04142.72159.29192.41225.66
54.6364.8375.0184.8695.02
115.39135.80156.25176.54197.03
ONLY! ONLY!
18" Part No. 1-951-
36" Part No. 1-965-
1/4"
5/16"
3/8"
1/2"
FOR KBC’S EXTENSIVE LISTING OF
FLAT STOCK VISIT: KBCTOOLS.COM
Nominal AnalysisCarbon ............ .90Chromium ....... .50Manganese ... 1.20Tungsten ........ .50Vanadium ....... .20
Plastic Thickness Gage Set
12" Fan Blade SetPart No. 1-958-78900Reg. Net Price $41.40
$3312
FEATURES:• Contains 13 blades riveted together for on-site convenience.• Color indicates thickness.• Made of the highest quality plastic material.• Non-corrosive, non- conductive, non-sparking, and non-marring.• Packaged in vinyl case.
Decimal/Metric Color
.001" (.025mm).0015" (.038mm)
.002" (.051mm)
.003" (.076mm)
.004" (.102mm)
.005" (.127mm).0075" (.191mm)
.010" (.254mm).0125" (.305mm)
.015" (.381mm)
.020" (.508mm)
.025" (.635mm)
.030" (.762mm)
AmberPurpleRedGreenTanBlueMatteBrownBlackPinkYellowWhiteCoral
13 THICKNESSES
Machinist Clamping Set
Part No. 1-904A-20402Reg. Net Price $98.00
$7840
Table T-Slot Size: 5/8" Stud Size: 1/2-13
FEATURES:• Made of cast iron.• Black finish.
Star Type Hand Knobs
$1.712.522.704.414.95
1/4-20 1" 5/16-18 1-1/2 3/8-16 2 1/2-13 2-1/2 5/8-11 3
-316-317-318-319-320
Thread Head Part No. Size Dia. 1-397- ONLY!
SET INCLUDES:• Plastic Case• (6) T-Slot Nuts• (6) Flange Nuts• (4) Coupling Nuts• (1) T-Slot Cleaner• (6) Step Blocks• (6) Serrated End Clamps• (24) Studs, 4 Ea.: 3", 4", 5", 6", 7", 8" Lg.
Major Credit Cards Accepted:
TOOLROOM ACCESSORIES
23Full Line Distributor of All Brands in Our Master Catalog.
FEATURES:• Drop-forged steel frame.• Steel screw, swivel and handle.• Replacement parts available.• Conform to U.S. Gov’t specs.• Copper plated screw.
Manufacturers of Quality "C" Clamps.
Industrial C-Clamps
$21.0525.4033.3544.5560.1077.65
105.90
Throat Screw Approx. Part No. Reg. Capacity Depth Dia. Wgt. (lbs.) 1-532- Net Price
0 - 2" 2" 1/2" 1-1/4 0 - 3 2-3/8 1/2 2 0 - 4 2-3/4 3/4 3-1/2 0 - 6 3-5/8 3/4 5 0 - 8 4-1/2 3/4 7 0 - 10 5-3/8 3/4 10-1/2 0 - 12 5-3/4 7/8 15-1/2
-402-403-404-406-408-410-412
$17.8921.5928.3537.8751.0966.0090.02
SALE!
Max. Throat Rated Part No. Reg. Size & Style Opening Depth Load 1-532- Net Price
1" T Handle 1-1/16" 1/2" 350 2" T Handle 2 1-1/8 800 3" T Handle 3 1-1/4 1500 4-1/2" D - Deep Throat 4-1/2 2-1/4 1700 6" T Handle 6 2-1/8 2000 6" D - Deep Throat 6 4-1/2 2000
-401-405-410X-415-420-421
$12.7515.4322.0423.5735.9439.20
$11.4813.8919.8421.2132.3535.28
SALE!
KANT-TWISTUniversal Clamps
FEATURES:• Floating jaws that always stay parallel.• Built-in V-blocks for round or rod stock.• Designed to eliminate distorting or twisting action.• Copper plated jaws & screws are ideal for welding.
Combine The Best Features Of Ordinary C-Clamps & Parallel Clamps!
-S Solid Holding Bar (Bolt retainers furnished) -U "U" Shaped Holding Bar * Plastic Spindle Assembly.
HORIZONTAL HANDLE HORIZONTAL BAR HOLD-DOWN
$9.149.14
11.9912.3515.9114.1024.41
Height Holding Overall Under Overall Capacity Part No. Reg. Model Height Base Length (lbs.) 1-910- Net Price
205-S* 3/4" 13/32" 2-3/4" 60 205-U* 3/4 13/32 2-3/4 60 213-U 11/16 3/4 3-15/16 150 215-U 1-1/2 1 5-7/16 200 217-U 1-29/32 31/32 6-17/64 200 225-U 1-7/8 1-3/8 6-19/32 500 235-U 2-1/2 1-3/4 10-1/8 750
-52060-52050-52130-52150-52170-52250-52350
$8.238.23
10.7911.1214.3212.6921.97
SALE!
Height Holding Overall Under Overall Capacity Part No. Reg. Model Height Base Length (lbs.) 1-910- Net Price SALE!
$11.8212.4015.2612.4016.2138.4624.2535.73
201-U 2-7/8" 5/8" 2-1/8" 100 202 3-3/4 15/16 2-9/16 200 202-B 3-15/16 1-1/8 2-9/16 200 202-U 3-15/16 15/16 2-9/16 200 207-U 5-1/2 1-1/4 3-7/8 500 207-USS 5-3/4 1-1/4 4-3/8 400 210-U 7-1/2 1-11/16 5-1/2 750 247-U 8-11/16 2 7 1000
-52010-52020-52025-52026-52070-52079-52100-52470
-U "U" Shaped Holding Bar -B Straight Base - No Flange
VERTICAL HANDLE HOLD-DOWN
$10.6411.1613.7311.1614.5934.6121.8332.16
LOW SILHOUETTE PLUNGER Holding Overall Plunger Overall Capacity Part No. Reg. Model Height Travel Length (lbs.) 1-910- Net Price SALE! 603 2-23/32" 1-1/4" 4-11/16" 600 607 3-9/32 1-5/8 4-5/16 800 630 2-7/8 2 7-1/16 2500
-56030-56070-56300
$22.8635.9343.95
$20.5732.3439.56
COMPANYA DOVER
Toggle Clamps
Supplied withspindle assembly.
Packaged Steel Shim Stock
This handy shim stock comes readypackaged in dispenser cartons for easyuse. Saves time, waste and bother. Precision-gauged for accuracy.
A full hard,cold rolled, low carbon 1008-1010. This is also aBranded™ Shim.
6" x 100" STEEL ROLLS
Part No. Reg. Thickness 1-955- Net Price
-A1-A1X-A2-A2X-A3-A3X-A4-A5-A6-A7-A8
$21.0024.9514.4015.1515.5516.6014.9513.7012.8013.3513.25
.001"
.0015
.002
.0025
.003
.0035
.004
.005
.006
.007
.008
Part No. Reg. Thickness 1-955- Net Price
-A9-A10-A12-A13X-A15-A16X-A18-A20-A22-A25-A31
$13.9014.1013.8017.1513.1018.0017.8014.8015.4515.8516.65
.009"
.010
.012
.0135
.015
.0165
.018
.020
.022
.025
.031
$11.8211.9911.7314.5811.1415.3015.1312.5813.1313.4714.15
$17.8521.2112.2412.8813.2214.1112.7111.6510.8811.3511.26
SALE!SALE!
Punch & Die Set
FEATURES:• Traditional style punch & die set.• Economical way to make washers, shims, and gaskets.• Clear plastic top plate marked with accurate center lines.• Cut stainless and blue tempered shim up to .010" thick.• Base and punches are made of hardened and ground A-2 tool steel.• Cut steel, brass, copper, aluminum, rubber, and plastic up to .025" thick.
Part No. 1-958-315Reg. Net Price $129.50
$11008
9 PUNCH SIZES INCLUDED:1/8", 3/16", 1/4", 5/16", 3/8",7/16", 1/2", 5/8", 3/4"
Machinist Calc® Pro 2Advanced Machining Math + Materials
Model 4088Part No. 1-961-004Reg. Net Price $89.95
$7646
The Machinist Calc® Pro 2 includes materials & tool settings combined with DOC & WOC to solve all your speed & feedcalculations for face, end or slot milling plus turning, drillingand boring. It also gives you step-saving drill & thread chart look-ups, right triangle solutions, bolt-circle patterns, a larger 2-line LCD display & much more all built into a portable,rugged & cost-effective handheld calculator.
INCLUDES: • Armadillo Gear Protective Hard Case.• Long-life battery (CR2025).• Quick Reference Guide and Easy-to-Follow User’s Guide.
Great for Machinists, Tool & Die Makers,Setters, Supervisors and Shop Owners.
C
A
BK
Case HardenedBlack Oxide Finish
Flange(Collar) Nuts
$1.471.561.681.962.002.563.76
Reference Thread Part No. Reg. No. A B C K 1-903- Net Price
-41601-41602-41603-41604-41605-41606-41607
FN-14 1/4-20" 5/8" 5/16" 1/2" FN-56 5/16-18 3/4 3/8 9/16 FN-38 3/8-16 7/8 1/2 11/16 FN-76 7/16-14 1 9/16 3/4 FN-12 1/2-13 1-1/8 11/16 7/8 FN-58 5/8-11 1-3/8 13/16 1-1/16 FN-34 3/4-10 1-5/8 1 1-1/4
$1.181.251.341.571.602.053.01
SALE!
Call: 1-800-521-1740 Fax: 1-800-322-4292 Web: KBCTools.com
MACHINERY
24
Model HVBS-712Part No. 6-200-033
$1,49900
Horizontal/VerticalBandsawFEATURES:• 7" round, 7" x 12" rectangular capacity.• 3/4 HP, 115V, 1 PH. • Portable, take the job & plug it in.• Hydraulic feed control.• Built-in coolant system.• 4 blade speeds.• 3/4" x 93" blade.• Net Weight: 374 lbs.
®
14-1/2" Capacity Gravity FeedVertical Saw
FEATURES:• 1 HP Motor, 1 Phase.• Accepts blades from 1/4"-3/4" wide.• 4 blade speeds to select from.• Accurate gravity feed with hydraulic speed control and depth stop.• Rugged simple construction for easy maintenance and long service life.
Model EFPart No. 6-398-005
$4,69500FINANCE AS LOW AS $107.99/mo.CALL FOR DETAILS
9" x 16"HorizontalBandsaw
Model BAH-916Part No. 6-271-025
$2,69500
$70.00Value!
Spare H.S. Blade IncludedFREE
FEATURES:• 1-1/2 HP, 115/230V, 1 PH.• 9" round, 3" x 16" or 9" x 13" rectangular capacity @ 90°.• 4 blade speeds with 1" x 129" blade.• Hydraulic feed control.• Built in coolant system.
Model TF-1420Part No. 6-398-006
$12,49500FINANCE AS LOW AS $287.39/mo.CALL FOR DETAILS
FEATURES:• Large 14" x 20" cutting capacity at 90°, 14" x 13" at 45°.• Infinitely variable blade speeds from 50-400 ft./min. via A.C. inverter
speed control - full motor torque through entire speed range!
• Infinitely variable feed from 0-150 lbs.(via. air/hydraulic system).
• Tilt frame design enables angle cuts without having to move the stock.
Vertical TiltFrameBandsaw
Automatic CycleBandsaws
MODELBS-15A SHOWN
FEATURES:• Cast iron construction.• Full auto cycle.• 3 HP drive motor.• 1" bi-metal blade.• Net Weight: 1,800 or 2,200 lbs.• Shipping Weight: 2,000 or 2,500 lbs.
Model BS-12A(12" Round Cap.)Part No. 6-275-007
$10,99500FINANCE AS LOW AS $252.89/mo.CALL FOR DETAILS
Model BS-15A(15" Round Cap.)Part No. 6-275-009
$13,29500FINANCE AS LOW AS $305.79/mo.CALL FOR DETAILS
FEATURES:• 3/4 HP, 115V, 1 phase.• Built in coolant system.• Hydraulic feed control.• 7" round & 7" x 11" rectangular capacity.• 4 blade speeds.
Model BAH-712Part No. 6-280-005
$1,09900
Horizontal/Vertical Bandsaw• 3/4" x 93" blade.• Portable - take this machine to the job and plug it in.• Net Weight: 325 lbs.• Shipping Weight: 400 lbs.
Major Credit Cards Accepted:
MACHINERY
25Flexible Financing to Afford the Machines You Need Now!
COMPLETE WITH:• Toolbox & Tools• Manual & Parts List• Drawbar for R8 Collets• Front & Rear Rubber Way Covers• 1/2" Capacity Drill Chuck & Arbor
7" x 18" VerticalBench Mill
Model GRIP-16Part No. 6-275-003
$2,24500
FEATURES:• Reversing switch.• Manual quill feed both rapid spoke wheel and fine feed handwheel control with an easy to read, front mounted depth gage.• Dovetail ways on table & saddle with adjustable tapered gibs.• Head assembly is raised and lowered on the column by a crank. The head pivots 360o on the column
and can be locked in any position.
SPECIFICATIONS:Drilling / End Mill Capacity ............ 1-1/4" / 3/4"Swing .................................................... 15-7/8"Max. Distance, Spindle to Table ................ 18"Spindle Taper / Travel .......................... R8 / 5"Column Diameter ................................... 4-1/2"Spindle Speeds (12) ................ 110-2,385 RPMTable / Cross Slide Travel .................... 18" / 7"Effective Table Area ............................ 28" x 8"Overall Height ....................................... 43-1/2"Motor .................................... 2 HP, 230V, 1 PHNet Weight ........................................... 660 lbs.Shipping Weight .................................. 750 lbs.
MODEL TUM-3VS Pictured with Newall Digital Readout and KBC Table Feed.
SPECIFICATIONS: TUM-3VSTable Size .............................................. 10" x 54"Longitudinal Travel Manual ........................... 32" with Power Feed ....................................... 28"Cross Travel ................................................... 16"Knee Travel .................................................... 16"Table to spindle min/max ......................... 16-5/8"Spindle to column at 90O .......................... 5" - 22"Spindle Speeds .......................... 70 - 4200 RPMSpindle Taper .................................................. R8Power Quill Feeds (per rev.) . .0017/.0032/.0053Quill Travel ........................................................ 5"Spindle Motor ............. 3 HP, 230/460V, 3 PhaseNet Weight ............................................. 2,800 lbs.Shipping Weight ................................... 3,200 lbs.
Heavy Duty Milling Machines
Model TUM-3VS Part No. 6-265-006
$8,62000FINANCE AS LOW AS $198.26/mo.CALL FOR DETAILS
Part No. 6-265-006-N5
$10,11500FINANCE AS LOW AS $232.65/mo.CALL FOR DETAILS
Complete with
DP-500 2-AxisDigital Readout& Table FeedINSTALLED!
ModelTUM-1VS Part No.6-265-007
$7,70000FINANCE AS LOW AS $177.10/mo.CALL FOR DETAILS
Part No.6-265-007-N5
$9,19500FINANCE AS LOW AS $211.49/mo.CALL FOR DETAILS
Complete with
DP-500 2-AxisDigital Readout& Table FeedINSTALLED!
Turret Milling MachinesSPECIFICATIONS: Table Size ................................................... 9" x 49" Longitudinal Travel Manual Model ..................... 35"Longitudinal Travel w/Power Feed ..................... 31"Cross Travel / Knee Travel ........................ 12" / 16"Table To Spindle min-max. ...................... 0-18-3/4"Spindle To Column at 90° ................. 6-3/4"-18-3/4" Spindle Speeds .................. 70 - 4,200 RPM (Var.)*Spindle Taper .................................................... R-8Power Quill Feeds (per rev.) .. .0017"/.0032"/.0053" Quill Travel ........................................................... 5"Spindle Motor Step Pulley .... 3 HP, 230/460V, 3 PHNet Weight (approx.) ............................... 2,200 lbs. Shipping Weight ...................................... 2,700 lbs.
3HP Variable Speed Head!
10" x 54" CNC VerticalMilling MachineWith 3-Axis Acu-RiteG2 CNC Control
FEATURES:• 3 HP, 3 PH Motor• NEW Acu-Rite G2 CNC control - easy to learn and simple to use.• 10" x 54" hardened and ground table with precision hardened ground ways.• Control features canned cycles for all regular milling and drilling jobs, just fill-in the blanks to complete a program.• Reliable mechanical V.S. Mill head delivers full torque over entire speed range.• Heavy-duty box ways on knee and column
with extra wide saddle for added rigidity.
ModelTUM-3VS-G23Part No.6-265-006-G23
$27,72000FINANCE AS LOW AS $625.92/mo.CALL FOR DETAILS
You won't find a better value on a CNC knee mill with top quality Acu-Rite G2 Control!
Complete with
FREE Floor Stand!
with Purchaseof any KBC Mill / DRO Package
$211.49Value!
FREETOOLING
• 13 Pc. Collet Set (1-519-020)• 52 Pc. Clamp Kit (1-904-20402)• 10 Pc. End Mill Set (5-300T-050)
Call: 1-800-521-1740 Fax: 1-800-322-4292 Web: KBCTools.com
MACHINERY
26
Part No. 1-123-065
with Purchase ofany Surface Grinder
5 Gallon Pailof GRINDZALTM
Pure SyntheticGrinding Coolant
$95.60Value!
FREE
FEATURES:• Ultra high column with 21" spindle to table.• Cartridge spindle with ABEC-7 precision spindle bearings.• Double "V" saddle ways, H-frame column design and heavyweight.• Roller ways for smooth effortless table travel.• Oversize spindle housing & flange mount design allows
heavier grinds than with other similar size machines.• Construction gives this machine exceptional rigidity.
6" x 18" Manual Surface Grinder 2 HP Motor, 230V, 3 PH
ModelKGS-618MPart No. 6-273-003
$8,84500FINANCE AS LOW AS $203.44/mo.CALL FOR DETAILS
Complete withfull coolantsystem, 6" x 18" permanent magnetic chuck, grinding wheel& wheel mount.
3-Axis Auto Feed Surface Grinders
FEATURES:• 5 or 7.5 HP, 3 PH motor.• Automatic lubrication.• 14" x 1-1/4" x 5" or 14" x 2" x 5" wheel.• Net Weight: 4,400 lbs. or 6,260 lbs.• Shipping Weight: 5,000 lbs. or 6,800 lbs.Model
SGS-1230AHD(12" x 30" Cap.)Part No. 6-273-020
$27,35000FINANCE AS LOW AS $617.56/mo.CALL FOR DETAILS
Model SGS-1640AHD(16" x 40" Cap.)Part No. 6-273-025
$41,09500FINANCE AS LOW AS $927.93/mo.CALL FOR DETAILS
Complete with electric chuck, coolant, and overhead dresser.
10" x 20" 3-Axis Auto Feed Surface Grinder
Model SGS-1020AHDPart No. 6-273-015
$21,15000FINANCE AS LOW AS $477.57/mo.CALL FOR DETAILS
FEATURES:• 10" x 20" grinding capacity.• Automatic lubrication system.• 3-axis automatic movement with incremental downfeed in .0001" steps.• Precision hand scrapped turcite table and saddle ways.• Rapid elevation motor for quick and easy positioning.• High column design with 19" spindle center to table.
INCLUDES:8" x 20" Magnetic Chuck, Dust-suction Coolant and Overhead Dresser.
9" x 32"Vertical Bench Milling Machinewith Optional Floor Stand, 2 HP, 115/230V, 1 PH Motor
COMPLETE WITH:• Draw Bar• Work Lamp• Chuck Arbor• 1/2" Drill Chuck• Drill Chuck Guard• Adjustable Carbide Facemill
w/ 2-Axis NewallDro & Table FeedPart No. 6-200-001-N5
$4,69900
Model JMD-18Part No. 6-200-001
$2,29900
FEATURES:• Forward and reverse switch.• Positive quick-stop knob and easy-to-read internal depth gauge.• Belt cover - quick slide latch allows faster belt adjustment to change spindle speeds.• One-piece cast iron column for added support.
SPECIFICATIONS:Drilling / Milling Capacity ........... 1-1/4" / 3/4"Swing ................................................ 15-7/8"Max. Distance, Spindle to Table ........... 18"Spindle Taper .......................................... R8Spindle Travel .......................................... 5"Spindle Speeds (12) ........... 150-3,000 RPMTable Size ............................ 9-1/2" x 32-1/4"Table Longitude Travel ..................... 20-1/2"Overall Dimensions .............. 47" x 40" x 51"Weight ............................................. 660 lbs.
®
Optional Floor StandPart No. 6-200-001SOur Net Price $319.00
20" Disc Sander/Grinder
FEATURES:• Heavy duty cast iron construction.• Hand wheel for raising and lowering table.• Powerful 2 HP direct drive motor with 3 PH.• For use on all materials; wood, metal, plastics, etc.• 20" solid metal disc is
high speed balanced for smooth vibration free operation.
Model DS-20Part No. 6-150-010
$1,49000
Major Credit Cards Accepted:
MACHINERY
27We Stock Parts for All KBC Brand Machines.
12" Disc &6" x 48" BeltHeavy-DutyCombination Sander
ModelWS1712Part No.6-397-WS1712
$70560
FEATURES:• 1-1/2 HP, 115V, 1 PH motor.• Precision ground cast iron tables.• ON/OFF toggle switch with safety key.• Cabinet style stand with power coated paint.• Quick change belt release.• Heavy-duty mitre gauge.• Net Weight: 178 lbs.• Shipping Weight: 230 lbs.
20-1/2" Floor Drill Press
®
Supplied with 3/4"capacity drill chuck.
Model JDP-20MFPart No. 6-200-039
$1,15390
FEATURES:• 20-1/2" swing; drill to center of 41" wide part.• 1" drilling capacity.• Spindle travel 4-5/8" /3MT spindle taper.• Max. spindle distance to table 29-1/8".• 12 spindle speeds: 150-4,200 RPM.• 1-1/2 HP, 1 PH, 115/230V motor; prewired 115V.• Net Weight: 288 lbs.• Shipping Weight: 375 lbs.
FEATURES:• 24" swing.• Power quill feed.• 4 MT spindle taper.• 8 speed geared head.• 1-1/2" drilling capacity.• Foot pedal operated instant reverse switch for tapping.• .75/1.5 HP Motor, 230V, 3 PH.• Net Weight: 675 lbs.
1-1/2" CapacityGeared Head Drill Press
Model 600BPart No. 6-325-005
$5,09500FINANCE AS LOW AS $117.19/mo.CALL FOR DETAILS
16" Heavy Duty Cut-Off Saw5 HP, 230V, 3 PH
FEATURES:• Vise swivels to 45°.• 3,000 RPM spindle.• 2" capacity solid bar, 3 pipe.• 16" x 1" bore abrasive wheel.• Heavy-duty cast iron frame upper & lower.
SPECIFICATIONS:Main Motor ...................................... 5 HPVoltage ................................ 230V, 3 PHSpindle Speed ..................... 3,000 RPMAbrasive Wheel ................. 16" x 1" BoreCapacity (Pipe) ................................... 3"Capacity (Round Solid) ...................... 2"Net Weight ................................. 210 lbs.Shipping Weight ........................ 258 lbs.
COMPLETE WITH:• Wheel Kit• ON/OFF Switch• Manual & Parts List• 1 Pc. 16 Abrasive Wheel Model COS-16
Part No. 6-100-010
$83500
4-1/2" Coldsaw2 HP Motor,230V, 3 PH
SPECIFICATIONS:Motor ....................... 2 HP, 230V, 3 PHBlade Speeds (2) ............. 18 & 36 RPMBlade Size .............. 350 x 2.5 x 32 mmCutting Capacity: Round @ 90° ......................... 4-1/2" Round @ 45° ................................ 4" Rectangular at 45° ................ 4" x 4" Rectangular at 90° ......... 4" x 5-1/2"Net Weight ................................ 475 lbs.Shipping Weight ...................... 550 lbs.
FEATURES:• 14" diameter blade cuts up to 4-1/2" diameter stock. • 2-speed low RPM cold saw uses a metal blade to cut burr-free.• ON/OFF control switch in handle grip turns on the blade & coolant.• Direct drive oil-filled worm gearbox.• Cabinet base with built-in coolant system.
Model CS-350Part No. 6-545-006
$3,44500FINANCE AS LOW AS $79.24/mo.
CALL FOR DETAILS
COMPLETE WITH:• Self-Centering Vise• Built-In Coolant System• Oil Filled Worm Gearbox• 45o Swivel of Head Left & Right
• 1 Year Parts Replacement Warranty
High Speed Blade IncludedFREE
Model RD-1000Part No. 6-269-011
$11,49500FINANCE AS LOW AS $264.39/mo.CALL FOR DETAILS
SPECIFICATIONS:Distance, Spindleto Column ........................................... 39.4"Spindle Taper .................................... 4 MTQuill Travel ....................................... 9-7/8"Column Diameter ................................. 10"Drilling Capacity ............................... 1-1/2"Voltage/Phase ................... 230/460V, 3 PHOverall Height ....................................... 93"Net Weight .................................. 3,080 lbs.Shipping Weight ......................... 3,800 lbs.
Radial Drill Press with 39" Arm
Complete with Box Table,
Coolant & Work Light.
Call: 1-800-521-1740 Fax: 1-800-322-4292 Web: KBCTools.com
MACHINERY
28
Large BoreEngine Lathes
SPECIFICATIONS:Swing Over Bed ............................. 22" / 26"Swing Over Cross Slide ............ 12.5 / 16.5"Swing Over Gap ............................. 30" / 34"Distance Between Centers ....60" / 80" / 120"Spindle Speeds (range) ............... 12 speeds (36-1600 RPM)Spindle Nose/ Spindle Bore ........ D1-8/4.12"Threads Standard ................ 32 (2 to 28) TPIThreads Metric Pitch .......... 22 (1 to 14) MMTailstock Quill Travel/Taper ......... 6" / #5 MTMain Motor .............. 10 HP, 230/460V, 3 PHNet Weight ............ 7,480 / 8,480 / 9,650 lbs.Shipping Weight . 7,900 / 8,900 / 10,200 lbs.
FEATURES:• 10 HP main spindle motor, 12 speeds.• Safety foot brake.• Clutch style headstock.• Inch dials and leadscrews.• Jog button, 4-way rapid traverse.• D1-8 camlock, 4.12" spindle bore.• Centralized lube system in headstock.• Hardened & ground gears & bedways.
STANDARD EQUIPMENT:• 3-Jaw Chuck (12")• 4-Jaw Chuck (16")• Face Plate (20")
• Splash Guard• Work Light• Standard Tools
• Steady Rest (8")• Follow Rest (1-3")• 4-way Tool Post
• Thread Chasing Dial• Coolant System• Full-Length
Big 4" Spindle Bore,Clutch Spindle Drive &4-Way Rapid Traverse.
High Precision Engine Lathes
FEATURES:• 7.3 HP main spindle motor, 12 speeds.• D1-8 camlock, 3.2" spindle bore.• Hardened and ground gears and bedways.• Solid one-piece cast iron base.• Inch dials & leadscrews.• Centralized lube system
in headstock.• Full-length safety foot brake.
Model KLS-1840G(18" x 40")
Complete with
DP-500 Digital ReadoutINSTALLED!
Model KLS-1860G(18" x 60")
Part No. 6-273-070-N5
$17,35500FINANCE AS LOW AS $391.88/mo.CALL FOR DETAILS
Part No. 6-273-071
$16,04500FINANCE AS LOW AS $362.30/mo.CALL FOR DETAILS
Part No. 6-273-071-N5
$18,36500FINANCE AS LOW AS $414.68/mo.CALL FOR DETAILS
Part No. 6-273-070
$15,15000FINANCE AS LOW AS $342.09/mo.CALL FOR DETAILS
Complete with 8" 3-jaw chuck, 10" 4-jaw chuck, steady rest and follow rest, 4-way toolpost, coolant system with full length rear splash guard, halogen work light, toolbox with tools, manual and parts list.
16" x 40" Precision Toolroom LatheFEATURES:• 6 HP spindle motor, 3 PH.• 16" swing x 40" between centers.• 16 spindle speed, 45-1800 RPM.• D1-6 camlock spindle with 3-point bearing support.• Large 2" spindle bore.
ModelGRIP-1640GHPart No.6-269-009-N5
$11,49500FINANCE AS LOW AS $264.39/mo.CALL FOR DETAILS
13" x 40" Heavy-DutyPrecision Lathe
FEATURES:• 5 HP 2-speed drive motor, 230V, 3 PH.• ISO 9001 Certified Factory.• 16 spindle speeds, 50-2,570 RPM.• Complete with 7" 3-jaw chuck, chuck guard, steady rest and
follow rest, 4-way indexable toolpost, coolant system with full length rear splash guard, halogen work light, toolbox
with tools, manual & parts list.
Model TRL-1340Part No. 6-273-058
$11,49500FINANCE AS LOW AS $264.39/mo.CALL FOR DETAILS
Part No.6-273-058-N5
$13,95000FINANCE AS LOW AS $320.85/mo.CALL FOR DETAILS
Complete with
DP-500 Digital ReadoutINSTALLED!
HEAVIEST HEAVY-DUTY
13" LATHE AVAILABLE!
Major Credit Cards Accepted:
MACHINERY
29Shop Our Complete Machinery Section @ KBCTools.com
Part No. 6-269-008-N5
$7,24000FINANCE AS LOW AS $166.52/mo.CALL FOR DETAILS
Complete with
DP-500 Digital ReadoutINSTALLED!Model
GRIP-1340GPart No. 6-269-008
$5,51500FINANCE AS LOW AS $126.85/mo.CALL FOR DETAILS
Model KLS-2260C(22" x 60")
Model KLS-2280C(22" x 80")
Model KLS-26120C(26" x 120")
Part No. 6-273-067-N5
$24,07500FINANCE AS LOW AS $543.61/mo.CALL FOR DETAILS
Part No. 6-273-068
$22,46000FINANCE AS LOW AS $507.15/mo.CALL FOR DETAILS
Part No. 6-273-068-N5
$24,97500FINANCE AS LOW AS $563.94/mo.CALL FOR DETAILS
Part No. 6-273-069
$26,43000FINANCE AS LOW AS $596.79/mo.CALL FOR DETAILS
Part No. 6-273-069-N
$31,02000FINANCE AS LOW AS $700.43/mo.CALL FOR DETAILS
Part No. 6-273-067
$21,20000FINANCE AS LOW AS $478.70/mo.CALL FOR DETAILS
Complete with
DP-500 or DP-700 Digital ReadoutINSTALLED!
Supplied withNewall DP-700 DRO
13" x 40" Precision Toolroom LatheFEATURES:• 2 HP spindle motor, 1 PH.• 13" swing x 40" between centers.• 8 spindle speeds, 70-2000 RPM.• D1-4 spindle mount, 1-1/2" bore.• Floor model with full-length rear guard.• All gear head, hardened and ground ways.
DON'T SEE THE SIZE LATHE YOU NEED? Shop KBCTools.com or email us at [email protected] with your specific needs.
With Newall DP-500 DRO SystemInstalled
FEATURES:• 9 spindle speeds, 70-1,400 RPM.• 12" swing x 36" between centers.• D1-4 spindle mount, 1-1/2" bore.• All gear head, hardened and ground ways.
12" x 36" PrecisionToolroom Lathe
Model GRIP-1236EPart No. 6-660-010
$4,36500FINANCE AS LOW AS $100.40/mo.CALL FOR DETAILS
Complete with Floor Stand,
Rear Splash Guard, 3 & 4 Jaw Chucks, Slotted Face Plate, Steady & Follow Rest.
14" x 40"CNC Lathewith Fagor 8055iCNC Control
FEATURES:• Programmable flood coolant.• 7.5 HP Servo drive spindle motor.• Induction hardened and ground ways.• Rigid FC30 castings with extra ribbing.• Extra large precision ground ballscrews.• Alloy steel gears that are hardened and ground.
SPECIFICATIONS:Swing Over Bed ........................................... 14" Swing Over Cross Slide ........................... 8-5/8" Distance Between Center ............................. 40" Width of Bed ................................................... 8" Spindle Nose .............................................. D1-4 Spindle Bore ................................................ 1.5" Spindle Taper ............................................ 5 MT Spindle Speeds .......................... 50-3,000 RPM Cross Slide Travel (X Axis) ............................ 8" Longitudinal Travel (Z Axis) .......................... 33" Tailstock Quill Dia. / Travel ........... 1-3/4" / 4-3/4"Tailstock Taper .......................................... 3 MT Voltage/Phase ................................. 230V, 3 PHNet Weight ......................................... 2,530 Lbs.Shipping Weight ................................ 2,750 Lbs.
Model CSM-1440CNCPart No. 6-273-056
$42,15000
FINANCE AS LOW AS $951.75/mo.CALL FOR DETAILS
COMPLETE WITH:• Toolpost • 3 MT Tailstock• Work Light • Coolant System• Full Enclosure with Sliding Front Doors as well as Side & Rear Access• Front Access Slide Out Chip Tray• Manual & Parts List• Automatic Lube System
Call: 1-800-521-1740 Fax: 1-800-322-4292 Web: KBCTools.com
SHOP SUPPLIES
30
NEBO REDLINE® BLAST
Part No.1-541-6542Reg. Net
Price $39.99
$3599
SPECIFICATIONS:Length Compacted ................ 7.25"Length Extended ................... 7.75"Diameter Barrel ................... 1.375"Diameter Head .................... 1.875"Weight .............................. 0.95 lbs.
With 1,400 lumens of high intensity light, this must-have flashlightcan throw a spectacularly bright beam over 260 meters. The BLASTis completely waterproof and ready for any weather condition.
FEATURES:• Convex lens.• Tactical edge.• 4x adjustable zoon.• Rear-positioned, on/off button with Soft Touch Technology.
• Signature Red RingTM.• Anodized aircraft-grade
aluminum; waterproof (IPX7) & impact-resistant.
• Powered by 6 AA batteries (included).
The brightest flashlight ever created by NEBO!
High 1400 Medium 560 Low 140 Beacon 200 Strobe 1400
2.57
30120
6
260 M 180 90 — —
Run Time Viewing Mode Lumen (Hours) Distance
LIGHTING MODES
Part No. 1-811-08000Reg. Net Price $24.99 $1999
Speedy Lathe Gage
FEATURES:• Made from high strength aluminum.• Durable anodized finish.• Precision glass vial level with 30' (2mm) sensitivity.• Set turning and facing tools
on spindle axis for optimum cutting conditions.
Flexzilla® Air Hose Assemblies
FEATURES:• Lays flat, no memory.• Superior bend radius.• Excellent abrasion- resistant outer cover.• Includes bend restrictors to reduce wear and tear, prolonging the life of the hose.• Kink resistant under pressure.• Extreme all-weather flexibility,
even in subzero temperatures! (-40oF to 140oF)
MAX. WORKING PRESSURE @ 70oF: 300 PSI / 1/4" MNPT
Length Hose Part No. Reg. Model (ft.) I.D. 1-914L- Net Price
HFZ1425YW2 25 1/4" HFZ1450YW2 50 1/4 HFZ14100YW2 100 1/4 HFZ3825YW2 25 3/8 HFZ3850YW2 50 3/8 HFZ38100YW2 100 3/8
-1425-1450-14100-3825-3850-38100
$18.3028.2050.2525.7041.1073.80
$15.5623.9742.7121.8534.9462.73
SALE!
Wet/Dry Vacuum
FEATURES:• Has an on-board power tool outlet with auto start/stop.• Top mount filter location.• Durable construction for years of use.• Built-in blower that quickly moves dirt & debris from hard-to-reach areas.
SPECIFICATIONS:Peak HP ........................... 2.5 HPAmps ............................. 15 AmpsVoltage ................................ 120VHertz ................................... 60 HzWatts ............................... 1800 WHose .......................... 1.35" x 7.2'Power Cord Length ................. 16'Tank Size ................... 6.6 GallonsAir Flow ........................... 76 CFMWeight ................................ 18.75
Part No. 1-831-WD5PReg. Net Price $199.99
$17999
INCLUDED ACCESSORIES:• Standard Floor Nozzle• Hand Grip Nozzle• Extension Wand• Pleated Filter• Crevice Tool• Fleece Bag• Hose
FEATURES:• Meet all DOT, CHP & CVSA requirements.• Flexible, conforms to and controls the load.• Ratchet assembly allows fast, easy adjustment.
2" WIDE ASSEMBLIES:• Long Handle Ratchet• 18" Fixed End Length• 30 ft. Standard Assembly Length• Ultimate Strength - 10,000 lbs.• Working Load Limit - 3,300 lbs.
Secure your loads with these quality tiedowns!
LoadHugger Ratchet Tiedown Flat Hooks
LiftAll Code: 61002Part No. 3-003-30001Reg. Net Price $27.25
$2316
These fine quality draw bars are a must for every shop!Draw Bar
REPLACEMENT FOR BRIDGEPORT-TYPE MILLS:Drawbars are one of the most commonly used consumables in the machine shop. You should stock spares in the shop to avoid downtime!
SPECIFICATIONS:Our O-Ring design prevents the spacer fromfalling into the head during installation. Manufacturedfrom cold rolled steel, with a black oxide finish.
Part No.1-850-Z9005
Reg. NetPrice $19.25
$1733
2J Drawbar - 23-1/4" LengthFor Vari-Speed Heads7/16-20 ThreadsQuick-SorbTM
AbsorbentMade from high-quality material, Oil-Dri® Quick-SorbTM has been specially processed for greaterabsorption power. Smaller granules offer moresurface area and allow Oil-Dri® Quick-SorbTM
to absorb up to 2x as much liquid per poundas conventional floor absorbents! Use on avariety of spills, including oil, grease and water.
20 lb. BucketPart No. 1-835-721
$1500
XL
Yukon® & Yukon® XL Clear Uncoated Lens Safety Glasses
Part No. Reg. Description 1-711- Net Price
-9800-9810
$2.653.40
$2.122.72
Uncoated Clear Coated Clear
-9800XL-9810XL
3.054.45
2.443.56
Uncoated Clear Coated Clear
YUKON
YUKON XL
NOW!
FEATURES:• Spatula temples.• Dielectric, no metal parts.• Rugged polycarbonate lens filters 99.9% of harmful UV rays.• Single lens design with integral side shields for greater orbital seal.• Wraparound style for increased angular coverage and improved peripheral vision.• Integral brow guard and vented side shields.• Exclusive Duramass® scratch resistant coating.• YUKON XL: Enlarged to fit over regular prescription glasses.
Major Credit Cards Accepted:
SHOP SUPPLIES
31Shop Online or Fax Orders 24/7 — All Tools... All The Time.
FEATURES:• Lightweight - headband.• Ideal for environments including factories, sheet metal works, schools, printing and textile operations and power equipment.• Dual low-pressure bands improve comfort.• Ideal for noise levels up to 98dBA.• Broad foam cushions provide low surface pressure.• NRR: 25 dB
Peltor™ Optime™ 98 Over-the-Head Earmuffs
Part No.1-720-0912Reg. Net
Price $16.01
$1361
7-Drawer 20" Machinists’ Chest
Model 52020-1/8" x 8-1/2" x 13-5/8"Part No. 1-823-00001Reg. Net Price $392.00
$35280
FEATURES:• 6 adjustable drawer dividers.• Drawers and top till wool felt-lined.• Vinyl cushioned, steel core top handle.• Two piece welded I-beam drawer slides hold up to 90 lbs. per drawer.• Weight: 35 lbs.
BrownWrinkle Finish
For High Power
$27.8529.2030.5531.91
$22.2823.3624.4425.53
Extension Part No. Reg. Model No. Length 1-816G- Net Price
75LJ 006 AA 6" 75LJ 012 AA 12" 75LJ 018 AA 18" 75LJ 024 AA 24"
-LJ006-LJ012-LJ018-LJ024
SALE!
Long John®
Extended ReachSafety Air Guns
The main flow of air exits through the nozzle tip and full plant air pressure is available to move and dislodge debris. In addition, a small portion of the main flow is diverted through slots around the periphery of the nozzle to form a protective air cone. Helps prevent chips and other debris from "flying back" towards the operator. Should the tip become blocked, the entire air flow is diverted through the slots. Under these conditions pressure at the nozzle tip is held to less than 30 PSI, satisfying OSHA safety standards.
FEATURES:• Venturi nozzle delivers 100% more thrust compared to conventional air guns.• Cleans hard to reach areas.
3 Pack, Size: LargePart No. 1-700-017
$1110
Leather GauntletCuff Gloves
1 Pair, Size: LargePart No. 1-700-002
$435Excellentprotection at anaffordable price!
FEATURES:• Made of C grade split cow shoulder leather.• 4.5" rubberized safety cuff.• Gray fabric with red stripe back.
APPLICATIONS:• Landscaping• Automotive Assembly
FEATURES:• Push button controls for inch/mm, zero-set and on/off.• Easy to read LCD with resolution of .0005" (0.01mm). 0-6" travel inch/mm.• Powered by a single SR-44 battery lasting about 1 year with normal use.• SPC Output for data transmission to data processors or a remote display.
Easy installation fits most vertical knee mills.
Part No. 1-808-053906Reg. Net Price $310.00
$26350
Quill Kitwith ABSOLUTE Encoder
Magnetic BaseFEATURES:• 20o beam spread.• 9' grounded cord and plug.• Dust-free vinyl coated industrial strength flexible gooseneck.• Metal shade with a 22" reach magnetic base.• 6 watt, 120V LED lamp produces 370 lumens.• Push button on/off switch with rubber boot.• Portable - minimal space required.
Model 7842Part No. 1-541-7842Reg. Net Price $103.95
$8836
Quick Set Shield Kits
Shield yourself from chips & coolant.
Part No. Reg. Size 1-836- Net Price
6" x 8" 7-1/2" x 10" 8-1/2" x 12"
-60525-60526-60527
$31.8134.2636.71
$28.6330.8333.04
SALE!
KITS INCLUDE:• 14" Adjustable 3/4" Loc-Line® Arm• Magnetic Base & Fitting
SPECIFICATIONS:Input Voltage ..... 110V, 50/60 Hz., 1PHSpeed Range ...... 4-160 MAX 200 RPMOperating Torque ................. 150 in/lbs.Weight ........................................ 15 lbs.
FEATURES:• Smooth running.• Electrical & mechanical parts are made for easy maintenance.• Special electrical relay protects against
damage caused by power failure.
Table FeedVariable Speed
Part No.2-011-211Reg. NetPrice $385.00
$30800
Delivers the heavy force needed for riveting, squeezing, punching, bending, and other pressing applications. Sturdy, cast-iron construction. Removable, machined steel, 4-position anvil. Rugged steel ram is driven by a machined pinion. Base drilled for mounting on a bench or pedestal.
AP10: Equipped withhandwheel to performlight and quick press work.
Arbor Presses
Max. Ram Force Work Dimns. Weight Part No. Reg. (Tons) Swing Height (SQ.) Height (lbs.) 1-549- Net Price
1.0 8" 6" 1" 11" 34 2.0 10-3/8 7-7/8 1-1/4 15-1/8 70 3.0 11-3/4 12-1/2 1-1/2 21 135
$115.30236.75369.40
-AP10-AP20-AP30
$98.01201.24313.99
NOW!
Call: 1-800-521-1740 Fax: 1-800-322-4292 Web: KBCTools.com
FLUIDS
32
MINICOOL Cooling System
Uses the VENTURI principle to spray an air & liquid mixture. It consists of the following basic elements: A control valve, spray unit, air line, syphon line and a powerful on/off Popeye magnet, which has a "V" form base, making it possibleto mount on non-flat surfaces. Enables the user to easily control both the airflow rate and liquid rate.
FEATURES:• Single spray unit.• Strong magnetic base.• Nozzle, connected via Loc-Line® flexible hose.• Stainless steel armored syphon hose and air hose.• Simple, inexpensive, rugged.• Separate on/off air & fluid controls.
Model MC1700Part No. 1-457-1700Reg. Net Price $106.20
$8495
Adjustable Coolant Hose System
FEATURES:• Fully hand-adjustable in both position and length.• Will stay in position without any springback. Creep due to machine vibration is eliminated.• Electrically non-conductive. It is ideal for use as an EDM flushing hose.
The Original Modular Hose System!
1/2" HOSE KIT INCLUDES:• 13" Length with Fittings (2) 5-3/4" Segments• 1/4", 3/8" & 1/2" Nozzles• 3/8" & 1/2" Male NPT Connectors
Part No.1-836-50813
$986
1/4" HOSE KIT INCLUDES:• 13" Length with Fittings (2) 5-3/4" Segments• 1/16", 1/8" & 1/4" Nozzles• 1/8" & 1/4" Male NPT Connectors
Part No.1-836-40413
$874
WS-11 Water Soluble Oil
Water-soluble oils combine oil with emulsifiers to create an oil-based coolant concentrate designed for water dilution that provides the lubricity of straight oils with the cooling and flushing abilities of water. They are compatible with virtually all types of metal and their unbeatable corrosion protection safeguards valuable parts and expensive machinery.
Economical general-purpose water-soluble oil for light machiningof all metals & can be used as a light film rust preventative.
1 GallonPart No. 1-122-74013Reg. Net Price $34.67
$3120
FEATURES:• Value actuated mechanism prevents paint in barrel from drying when cap is left off. • Heavy duty aluminum body with large paint capacity.• Formula is not xylene-based.• Make permanent bright marks on metal, rubber, plastic, glass, concrete,
leather, stone, wood, vinyl, and more.• Bullet tips are replaceable to ensure
complete use of paint in each marker.• Drying Time: 25 - 35 seconds.
BRITE-MARK® Markers
Quick drying, oil-based paint withstandsindoor and outdoor conditions withoutfading, chipping or losing its opacity.It can be used to permanently identifyinventory, assemblies, tools, finishedproducts or work-in-progress while resisting most work related abuses or compounds.
Our most popular marker, featuresa medium tip for clear, bold markings.
Part No. Dykem Color 1-442-
Dark BlueBlackWhiteYellowOrangeRedGreen
-M1-M2-M3-M4-M5-M6-M7
$3.293.293.293.293.293.293.29
ONLY!
Small Submersible Oil Filled Pump
FEATURES:• 10’ cord.• 170 GPH @ 1 ft.• Operates submersed.• Epoxy-csoated aluminum housing.• Not recommended for aquariums, swimming pools and fuel oil transfer.• 1/4" inlet MNPT discharge, with 90° elbow accessory, accepts 1/2" I.D. tubing.• 7’ shut-off head capability, and screened inlet.• Bottom inlet has snap-off screen for easy cleaning.
Permanently Lubricated Pump
Model 1-ATPart No.1-440-500286Reg. NetPrice $98.70
$8390
FEATURES:• No special ventilation required and all components are VOC free.• Imparts a tough, dull black protective finish to most ferrous metal parts.• Fast, inexpensive alternative to black oxide.• Ideal for blackening prototypes and repair parts, along with architectural and design projects.
Tool Black®
Liquid Kit
INCLUDES (1 PINTBOTTLE OF EA.):• Tool Black® Liquid• Metal Polish/ Cleanser • Prevent®
Part No.1-958-45120Reg. NetPrice $117.45
$9983
$15.7743.87
Part No. Reg. Size 1-444- Net Price
-1330583-1330585
10 ml Bottle50 ml Bottle
SALE!$13.40
37.29
Versatile, high strength liquid threadlocker. Engineered to cure consistently on a variety of metals, despite minor surface contaminants. Works on steel, stainless steel and most plated fasteners. Tolerates thread lubrication, anti-corrosion & protection fluids. Heat required for removal.
263™ ThreadlockerPrimerless / Oil Tolerant / High Strength / Red
FEATURES:• Upgraded temperature resistance - up to 360°F.• Oil tolerant curing on as-received fasteners without cleaning.• Primerless performance on both inactive and active metals.
ProTap®
Cutting Fluid
NON-OZONE DEPLETING
FEATURES:• For use with any cutting
operation on any metal.• It will not stain or change
the properties of soft metals.• 100% biodegradable
& free of all regulated chemicals.
• Clean up is easy and heat dissipation is rapid.
4 oz. Spout Top16 oz. Spout Top1 Gallon Can
-30004P-30016P-30128P
Part No. Reg. Description 1-444- Net Price SALE!
$3.2410.3561.95
$2.929.32
55.76
NON-OZONE DEPLETING
Major Credit Cards Accepted:
HAND TOOLS
33The Best Tools for Less — We Will Not Be Undersold!
CombinationWrench Sets12 Point
FEATURES:• Full polished for comfort & ease of use.• Nickel chrome plated for long lasting protection.• Sizes stamped on both sides for easy reading.• Chrome Vanadium alloy steel for long lasting durability.
14 Pc. SAE Set3/8", 7/16", 1/2", 9/16", 5/8",
11/16", 3/4", 13/16", 7/8", 15/16",1", 1-1/16", 1-1/8" & 1-1/4"
with Roll-Up HolderPart No. 1-552-CCWS4Reg. Net Price $86.49
$6919
15 Pc. Metric Set7, 8, 9, 10, 11, 12, 13, 14,
15, 16, 17, 18, 19, 20 & 21mmwith Roll-Up Holder
Part No. 1-552-CCWS5Reg. Net Price $86.49
$6919
FEATURES:• Wide hardened flared clearance grooved rollers allow true cuts close to flared end tubing.• Ratcheting action rotates the cutter around the tube allowing use in close quarter applications.• Comes with RW122 tool steel cutting wheel for use on
copper, aluminum, other thin wall tubing, & iron pipe.• Spare cutting wheel supplied in handle.• Longer handle requires less effort.• Cuts cooper, brass, aluminum tubing and thin wall conduit.• Replaceable cutting wheels: RW121/2, RW122, RW122P
E-Z RatchetTubing Cutter
1/8" to 1-1/8" CapacityPart No. 1-805-133Reg. Net Price $22.35
$1788
Adjustable Micrometer Torque Wrenches
®
FEATURES:• Simple locking collar handle to avoid changing torque value while in use.• Ratchet design is very strong and durable.• Knurled handle to provide comfortable non-slip grip.• Wrench is adjustable to torque value by rotating grip.• At present torque value a strong audible and tactile impulse is emitted. • Accuracy of +/- 3% Indicated Value (from 20% to 100% of capacity) meets or exceeds ASME B107.14M & ISO 6789.
High quality, American made Micrometer Torque Wrenches dual scale feature allows easy change over from SAE to Metric applications.
Drive Part No. Reg. Size 1-931- Net Price
$340.51244.31270.42
$289.43207.66229.86
-75002-75100-75150
1/4" 3/8 1/2
ONLY!
Model CS8525Part No.
1-552-26354Reg. Net
Price $18.36
$1561
FEATURES:• Rigid extra wide blade provides 10’ of standout.• Wide end hook holds better and makes marking easier.• Integrated D-ring for tether strap or easy hanging storage.• Drag Strip™ finger access for measuring & retraction control.• Durable molded case allows for added control and grip.
Accuracy, Reach, & Durability... all in one!
Hi-Viz Control Series Tape
1-3/16" x 25’, English
FEATURES:• Steel shot inside head eliminates rebound, conserving energy of each blow.• High-impact poly jacket surrounds the all-steel handle and head, preventing marring of surfaces.• Diamond textured handle for non-slip grip.• Made with lead-free and 3P phthalate-free materials.
®
Dead BlowHammers
Weight Face Part No. Reg. (lbs.) Dia. OAL 1-909- Net Price
$13.0514.3015.5519.85
1 1-1/2" 12" 1-1/2 1-3/4 13 2 2 14 3 2-1/4 14
-3182-3183-3184-3188
$10.4411.4412.4415.88
SALE!
5 Piece Plier Set
TOOL ROLL NO. 3 INCLUDES:526 - 6.5" Slip Joint Plier.3017 - 8" Long Nose Plier.337 - 7" Diagonal Cutting Plier.430 - 10" Tongue and Groove Plier.420 - 9.5" Tongue and Groove Plier.
Part No. 1-820-TR3Reg. Net Price $75.80
$6443
® Ballpoint Hex L-Wrench SetsIn Bondhex Cases
BLX-13 - 13 Pc. Inch Set(.050" thru 3/8").Part No. 1-927-10937Reg. Net Price $16.56
$1159
BLX-9M - 9 Pc. Metric Set(1.5mm thru 10mm)Part No. 1-927-10999Reg. Net Price $13.46
$942
FEATURES:• Protanium™ has 20% more
torque in use for tighter screws. Also it provides
longer wear, and has sharper corners for extra grab.
8 Pcs. - Length: 4"(1/16 to 5/16") 5 Pcs. - Length: 8"(1/8 to 3/8")
Part No. 1-397-SPC85Reg. Net Price $21.15
$1586
FEATURES:• Tool steel, hardened and tempered; centerless ground.• Uniformly heat treated, knurled body for easy gripping.
13 Pc. CombinationPin Punch Set
Call: 1-800-521-1740 Fax: 1-800-322-4292 Web: KBCTools.com
POWER / AIR TOOLS
34
SPECIFICATIONS:Amps .............................................. 1.15Speed Range .... 15,000 or 35,000 RPMVoltage ..................... 120 AC, 50-60 HzCord Length ........................................ 6’Weight ......................................... 18 oz.Warranty .................................... 2 years
FEATURES:• Cool-running ball bearing construction for smooth and quiet operation.• Replaceable motor brushes extend tool life.• Click-and-set on/off switch allows precise speed selection.• Lightweight design for comfort.
Model 200-1/15Part No. 1-829-2001Reg. Net Price $71.38
$6067
KIT INCLUDES:• Dremel 200 Series Rotary Tool• Lawn Mower & Garden Tool Sharpener• 15 Accessories
200-1/15 SeriesTwo SpeedRotary Tool Kit
Medium Rear Exhaust Air Die Grinder1/4" Collet
Part No. 1-829-5762Reg. Net Price $29.50
$2360
SPECIFICATIONS:Speed .................................... 20,000 RPMAverage Air Consumption ............... 3 CFMLength ..................................................... 6"Net Weight ...................................1-1/2 lbs.
Rear exhaust die grinder, has sturdy 1/2 HP motor built-in power regulator, variable speed throttle control,and full ball bearing construction.
FEATURES: • Motor/magnet interlock. • Solid state electric switching.• Automatic base/chip de-mag.• Automatic electronic soft-start.• Computer controlled reverse.• Full wave magnetic holding power.• Superior cutting tool performance.• Base control panel includes variable speed adjusting for motor.• Forward/reverse & feedback speed control.• Line lock-out prevents tool from operating should voltage be restored to an interrupted line when switch is locked in the "on" position.• For use on any flat ferrous material 1/2" & thicker.
Electromagnetic Drill Presses
DRILL MOTORSDRILL
STAND
ELECTROMAGNETIC DRILL STAND ONLY
120/12.5 1,650 lbs. 9" 15" x 4-1/4" x 11" 41 $1010.80
Max. Drill Point Volts/ Pressure On Drill Dimensions Weight Part No. Reg. Amps 1" Steel Plates Travel (H x W x L) (lbs.) 1-828- Net Price
-4202 $909.72SALE!
• Two Speed Drills, 5/8"-11 or 1/2"-13 taps not recommended.† Drills except #42531 have dual mount gear case
DRILL MOTORS FOR STANDS
$406.00680.40862.40
Volts/ Drill Tap No Load Chuck Part No. Reg. Amps Cap. Cap. AMPS RPM or Taper 1-828- Net Price
120/ 6.2 1/2" 5/8"-18 6.2 600 Chuck 120/11.5 3/4 1"-14 11.5 350 Chuck 120/11.5 1-1/4 1"-14 11.5 750/375 #3MT
-42531-42621-42921†
SALE!$365.40
612.36776.16
Bench GrindersProvides 88 plus minutes ofcontinuous use at full load withless than 1% RPM loss from thestated maximum. Capacitor motorssupply the extra current requiredduring start-up and running underload. Large diameter armatureshaft with shielded ball bearing.CSA NRTL/C certified.
FEATURES:• Heavy-duty construction with powerful, long-life motor for use all day, everyday.• Large cast aluminum tool rest tilts for angle grinding.• For general purpose grinding including sharpening, shaping, deburring, stock removal and cleaning of rust & scale.• Dust collection hose on #82081 (2-1/2").
INCLUDES:• Tool Rest• Eyeshields• Spark Arrestors• (1) 36 Grit & (1) 60 Grit Grinding Wheel• Power Cord
Wheel Max Arbor Part No. Reg. Dia. H.P. Voltage (Phase) RPM Size 1-549- Net Price
6" 1/3 120/240 (1 PH) 3,450 1/2" 8" 3/4 120/240 (1 PH) 3,450 5/8"
-82061-82081
$116.00 232.00
$98.60 197.20
NOW!
Part No. 2-002-2FSMReg. Net Price $465.00
$41850
2" Belt SanderFEATURES:• Tilt Table.• 2" x 48" Belt.• Direct drive 1/2 HP,
115V, 1 PH motor.
• Hinged guard for quick belt change.
• Shipping Weight (approx.): 55 lbs.
SPECIFICATIONS:Amps ..................................... 6.3Voltage ............................... 120VNo Load Speed .... 0-2,900 RPMTool Weight .................... 5.4 lbs.
FEATURES:• 1/2" Keyed chuck.• Double insulation.• Non-Slip soft grip.• Full power with switch in both forward & reverse.• Aluminum gear housing.• Power on indicator light.• Drill or hammer mode switch. • Variable speed control trigger & lock-on button for continuous operation.• Lateral handle and depth stop rod sets the driving depth.
1/2" Hammer Drill
Part No.6-125-154
$6204
INCLUDES:• Chuck Key• Multiple Position Lateral Handle• Depth Stop Guage
SPECIFICATIONS:Rating .......................... 120V ACAmperage .............................. 6.0Max Motor HP ....................... 1.0No Load RPM .................. 11,000Wire Cup Brush ...................... 3"Spindle Thread .............. 5/8"-11"Wire Wheel ............................. 4"Length ............................ 10-1/2"Weight ......................... 3.75 lbs.
4-1/2" Small Angle Grinder
INCLUDES:• Guard.• Flange Kit.• Abrasive Wheel.
• Auxiliary Handle.• Spanner Wrench.
FEATURES: • Lock-on/off for extended use applications.• Sealed switch - Keeps debris out of the mechanism and extends switch life.• Service MinderTM brushes - Eliminates guesswork, stops the tool when preventative maintenance is required.• Epoxy coated field windings - Provides protection against abrasive dust and metal debris.• Spindle lock - For quick wheel changes.• 2-position auxiliary handle.
Part No. 1-833-1375AReg. Net Price $82.00
$7380
Major Credit Cards Accepted: 35Shop our current Inventory Clearance Deals at KBCTools.com
S A L ELIMITED QUANTITIES
SPECIFICATIONS:Free Speed ......... 20,000 RPMCollet Size ....................... 1/4"Air Consumption (CFM) ...... 4Air Inlet (NPT) ................. 1/4" Total Length ................. 6-7/8"Tool Weight .............. 1.32 lbs.
FEATURES:• Full size to handle most general
purpose to heavy-duty grinding applications.
Straight Die Grinder
Model PT2430Part No. 1-832-PT2430Reg. Net Price $38.20
NOW ONLY!
$2292
Ideal for grinding, deburring, porting, and polishing!
The precision lathe chucks can be used on all types of lathes and different kinds of milling, drilling and CNC attachments.
Body made of quality cast iron. All guideways and bearing surfaces are precisely machined. Scroll Plate drop forged of fine alloy steel, carefully case hardened. Thread flanks ground on both sides. Jaw teeth and guides are hardened and fully ground on both sides. Pinions hardened and ground.
Three-Jaw Plain Back Self-Centering Scroll ChucksSEMI-STEEL BODY WITH TWO-PIECE REVERSIBLE JAWS
$1364.20
Thru-Hole Weight Part No. Reg. Size Diameter (lbs.) 7-800- Net Price
12" 4.0551 96 -120 $954.94NOW!
230 VOLTSTANDARD
FEATURES:• Instant reversing cycles efficiently performed.• Multi-speed motors operate equally well.• Motors may be either Wye or Delta connected.• No motor modification is required.• Multiple motors operate from one unit.• Numerous successful applications such as welders, computers, CNC, etc.• 5 Year Warranty.
CONVERTS SINGLE PHASE POWER INTO THREE PHASE POWER.
Roto-Phase I Rotary-Type Phase Converter Standard-Duty
NRTL/C
Roto-Phase I is a general purpose multi-motor generating system, operating a number of 3-phase motors having moderate starting torques. Where the largest motor operated equals the HP rating of the Roto-Phase all additional motors should be of lesser horsepower.
Largest Recom. Weight Part No. Reg. Model Motor HP Cap. (lbs.) 0-000- Net Price
$933.001458.002141.002618.00
-010-020-025-030
MG 1-1/2 5 84 A 5 12 171 R 7-1/2 17 222 B 10 25 275
$746.401166.401712.802094.40
SALE!
Chamfering &Deburring MachineFEATURES:• Ideal for chamfering/deburring of small workpiece.• Includes: (6) SPU-422 inserts in indexable milling cutter.• Easy set-up.
SPECIFICATIONS:Voltage .................................. 1PH, 110V/60HzSpeed .............................................. 3500 RPMLength of Guide Rails .................................. 20"Chamfering Capacity ............................. 0 - 1/8"Chamfering Angle ............................... 15° - 45°Space Requirement ............................ 20" x 12"Weight .................................................... 67 lbs.
Part No. 1-548-100Reg. Net Price $790.00
NOW ONLY!
$58900
FEATURES:• AngLock® design assures
the movable jaw does not lift.• 80,000-PSI ductile iron body.• Matching bed heights within
±0.001" at additional cost.• Standard bed height of ±0.001".• Hardened vise bed.• Hardened jaw plates.• Semi-hard steel screw.
Part No. 1-5721-100Reg. Net Price $3653.52
$2,99900NOW ONLY!
SPECIFICATIONS:Jaw Width ............... 10"Jaw Opening ...... 9-3/4"Weight ............. 300 lbs.
SS Series, Single Speed, Electric Chain Hoist
FEATURES:• Upper and lower limit switches prevent over-travel.• Gear train features lifetime lubrication, no oil changes required.• Reliable DC electromagnetic brake holds the load even if power is interrupted.• Can be operated on 50Hz power with 16% reduction in lifting speed.• Single phase - thermal overload protection. Three phase - reverse phase protection.
1,100 19.7 1 10 20-3/16" .875 1 115/230 2,200 19.7 1 10 24-7/16 1.750 1 115/230 1,100 31.5 1 10 20-3/16 1.200 3 230/460
Lifting Standard Capacity Speed Number Lift Head Part No. Reg. (lbs.) (FPM) of Falls (ft.) Room HP Phase Voltage 3-001- Net Price
$2291.992827.992059.99
-121100-111000-123100
$1718.992120.991544.99
SALE!
SAVEup to
SAVEoverover
SAVE
$707
D-100 AngLock® Vise
SAVEup to
SAVEoverover
SAVE
$650
SAVEup to
SAVEoverover
SAVE
$200
32 oz. CapacityPart No. 1-541-060Reg. Net Price $52.06
$4165
PRO-X MillIndexable Face Mill Kits
FEATURES:• Strong clamping due to the concave face of insert bottom side.• Good chip flow and less build up edge are achieved through buffed surface of insert.• High rake angle of insert provides good surface finish and low cutting load.• Specially designed for high speed machining of aluminum.• Suitable for square shouldering and curved surface machining.
KIT INCLUDES:• (1) PRO-X Mill Cutter.• (10) XEKT Inserts (Grade H01).• Wrench, Grease, & Literature.
Cutting Arbor Cutting No. of Part No. Dia. Height Hole Depth Inserts 1-244- Inserts 1-1/2" 1-1/2" 1/2" .670" 3 2 1-3/4 3/4 .670 4 3 2 1 .670 5 4 2-1/2 1-1/2 .670 6
$286.00297.00330.00352.00
-153N-2075-307N-407N
(10) XEKT19M508FR-MA(10) XEKT19M508FR-MA(10) XEKT19M508FR-MA(10) XEKT19M508FR-MA
KIT INCLUDESONLY!
FEATURES:• Trunnion style base.• Pin stops every 15° for quick angle setups.• Base and bed parallel to 0.004".• Jaw surface is square to 0.002".
Cradle Angle Vises
These vises allow quick and easy adjustments on work that frequently requires angle setups. The fastest way to get your work from 0°-90°.
Model Jaw Jaw Throat Wgt Part No. Reg. No. Width Opening Depth (lbs.) 1-549- Net Price
AVC30 3" 3" 1-3/8" AVC40 4 4 1-3/4
$84.00120.00
-AVC30-AVC40
1017
$67.2096.00
SALE!
® A1000 Sprayer
FEATURES:• Eliminate aerosol disposal problems.• Powder coated steel interior sprayer.• Rechargeable and refillable.• Not recommended for paint.• Completely portable.• Multi purpose nozzle, set for regular mist.• No Ozone depleting tax.• Environmentally safe.• Working Pressure: 80-150 PSI.• Not for use with water or water-based materials.
COOLANT KINGTM
SOLUBLE OIL METALWORKING FLUID
FEATURES:• Designed for all cutting and turning applications where a soluble oil is desired.• An excellent choice of machining materials such as Titanium, Iconel 718, Rene 41, Waspalloy, Cobalt based Super Alloys, Aluminum, Stainless Steel and other Aerospace materials.• Very compatible with all machining applications.• Exceptionally good bacteria and mold control ensure a long life and
minimize the use of other additives.• Outstanding lubricity and corrosion control with EP additives provide long tool life.
1 Gallon BottlePart No. 1-123-185Reg. Net Price $25.65
$2180
5 Gallon PailPart No. 1-123-190Reg. Net Price $124.30
$10566
WATERSOLUBLE!
NOW ONLY!
NOW ONLY!
NOW ONLY!
KBCTools.comWEB:
1-800-521-1740PHONE:
1-800-322-4292FAX:
Machinery Division6465 18 Mile RoadSterling Heights, MI 48314Local Calls ....... (586) 731-3600Fax Main Line .. (586) 731-7464
4 LOCATIONS TO SERVE YOU!Showroom Hours: Monday to Friday 8am - 5pm
Detroit6300 18 Mile Rd.Sterling Heights, MI 48314Local Calls ....... (586) 979-0500Fax Main Line .. (586) 979-4292
U.S.A.
HEADQUARTE
RS
Hours: Monday to Friday 7am - 5pm
Chicago910 Busse RoadElk Grove Village, IL 60007Local Calls ....... (847) 758-4400Fax Main Line .. (847) 758-4110
Los Angeles1021 S. Placentia Ave.Fullerton, CA 92831Local Calls ....... (714) 278-0500Fax Main Line .. (714) 278-0505
ATTN: PURCHASING DEPARTMENTATTN: PURCHASING DEPARTMENT
PRST. STD.U.S. POSTAGE
PAIDKBC TOOLS
6300 18 MILE ROADSTERLING HEIGHTS, MI 48314