SALE CATALOG

SALE CATALOGSPECIALTY TOOL & MACHINE CO., INC.

AND LTS INDUSTRIES, INC.3331 Gilmore Industrial Blvd., Louisville, KY 40213

WEDNESDAY, JULY 11, 2018 – 9:00 AM

Auctioneers:Jeffrey L. Luggen – License #RP7066Joseph M. Luggen – License #RP3521

15% BUYER’S PREMIUM IS IN EFFECT FOR THIS SALE ON-SITE!18% BUYER’S PREMIUM IS IN EFFECT FOR THIS SALE ONLINE!

NO MERCHANDISE MAY BE REMOVED WHILE THE SALE IS IN PROGRESS!

ALTHOUGH INFORMATION HAS BEEN OBTAINED FROM SOURCES DEEMED RELIABLE, THE AUCTIONEER MAKES NO WARRANTY OR GUARANTEE EXPRESSED OR IMPLIED, AS TO THE ACCURACY OF THE INFORMATION HEREIN CONTAINED.

IT IS FOR THIS REASON THAT BUYERS SHOULD AVAIL THEMSELVES FOR THE OPPORTUNITY TO MAKE INSPECTION PRIOR TO THE SALE.

Sale Under the Management of

CINCINNATI INDUSTRIAL AUCTIONEERSauctioneers | appraisers | since 1961 | cia-auction.com | [email protected] Dunlap St., Cincinnati, Ohio 45214 Phone 513-241-9701 Fax 513-241-6760

AUCTIONPUBLIC

____ ___JI

SYNOPSIS OF THE TERMS OF SALE

SPECIALTY TOOL & MACHINE CO., INC. AND L TS INDUSTRIES, INC.

3331 Gilmore Industrial Blvd., Louisville, KY 40213 WEDNESDAY, JULY 11, 2018-9:00 AM

REGISTRATION: All Bidders must register and are required to give positive identification at time of registration.

"AS IS, WHERE IS": Everything is being sold for cash on an "as is", "where is" basis without warranties expressed or implied on part of the Owner and Auctioneer. There are NO REFUNDS, NO EXCHANGES, NO GUARANTEES or NO WARRANTIES on any item. ALL SALES ARE FINAL.

DEPOSITS: All Bidders must post a deposit upon request at time of registration or at time of sale by Auctioneer.

PAYMENTS: ONSITE BUYER'S INVOICES MUST BE PAID IN FULL AT THE SALES CONCLUSION. ONLINE BUYER'S INVOICES MUST BE PAID IN FULL WITHIN 24 HOURS AFTER THE AUCTION. Any merchandise not paid for by this specified time will be considered abandoned and may be resold by the auctioneer, any loss incurred in the resale to be borne by the original buyer. All payments must be made in cash, check, wire transfer or certified funds. Please inquire with auction personnel regarding the acceptance of funding.

REMOVAL: Time permitting, auction personnel will be available at the conclusion the sale for one (1) hour for the Buyer to removal tabletop and hand carried items.

ALL SMALL ITEMS MUST BE OFF THE PREMISES BY FRIDAY, JULY 13, 2018 at 4:00 PM. Auctioneer/Owner will not be responsible for any small items after this time.

ALL LARGE ITEMS MUST BE OFF THE PREMISES BY FRIDAY, JULY 20, 2018 at4:00 PM. At which time the Auctioneer's representative will leave the premises. After this time, arrangements for removal must be made with the Owner.

"TIME IS OF THE ESSENCE" ALL ITEMS MUST BE OFF THE PREMISES BY FRIDAY, JULY 27, 2018 at 4:00 PM. At the Owners Discretion, any items remaining after this time will be removed from the premises and stored at the expense of the buyer, considered abandoned and scrapped.

CHECKOUT HOURS: Thursday, July 12th and Friday, July 13th From 8:00 AM to 4:00 PM Monday, July 16th - Friday, July 20th From 8:00 AM to 4:00 PM By Appointment Only during Normal Business Hours Through Friday July 27, 2018!

IMPORTANT AUCTION NOTICES: 15% BUYERS PREMIUM IS IN EFFECT FOR THIS SALE ONSITE! 18% BUYERS PREMIUM IS IN EFFECT FOR THIS SALE ONLINE!

ALL BUYERS WILL BE REQUIRED TO EXECUTE AN "AUCTION PURCHASE REMOVAL AGREEMENT" NO MERCHANDISE MAY BE REMOVED WHILE THE SALE IS IN PROGRESS!!!

ALL SALES SUBJECT TO STATE AND LOCAL SALES TAX WHERE APPLICABLE ALL BIDDERS MUST COMPLY WITH OUR CUSTOMARY "TERMS OF SALE" ATTACHED HERETO, POSTED AT THE SALE SITE & OUR

WEBSITE @WWW.CIA-AUCTION.COM.

WIRING INSTRUCTIONS The balance of your invoice may be wired directly to our bank:

PNC Bank, 201 East Fifth Street, Cincinnati, Ohio 45201 Call for Complete Wire Transfer Instructions

PLEASE SPECIFY YOUR BIDDER NUMBER WHEN MAKING YOUR WIRE TRANSFER NOTE: A BANK WIRE TRANSFER FEE WILL APPLY WHICH IS NOT INCLUDED IN BALANCE DUE OF INVOICE

(A CINCINNATI INDUSTRIAL AUCTIONEERS auctioneers I appraisers I since 1961 I cia-auction.com I [email protected] 2020 Dunlap St., Cincinnati, Ohio 45214 Phone 513-241-9701 Fax 513-241 -6760

TERMS OF SALE

NOTICE: All Bidders and other persons attending this sale ("Bidders") agree that they have read and have full knowledge of these terms and agree to be bound hereby. The Bidder identified by the Auctioneer as the high bidder or successful bidder at auction ("successful Bidder") shall have entered into a legally binding contract to purchase the item bid upon ("Lot") at the price and subject to the terms and conditions set forth herein. All determinations, rulings, and adjustments made by the Auctioneer in good faith shall be final, binding, and conclusive upon all Bidders. The term "Auctioneer" herein means Cincinnati Industrial Auctioneers, Inc.

1. IDENTIFICATION - All Bidders are required to give full name and addresses at time of registration. 2. DEPOSIT - Each successful Bidder will be required to make a deposit in cash or by bank cashier's or certified check

of 25 percent (25%) of the successful bid on each Lot at time of knockdown. In default of such deposit, the Lot may be put up again immediately and resold.

3. TIME OF PAYMENT- Each successful Bidder shall receive an invoice during or at the conclusion of the auction. All invoices must be paid in full by the close of business on the last day of the auction sale and prior to removing any Lot. Any other arrangements must be made with auctioneer prior to bidding. In the absence of payment or agreement by the auctioneer, title to the Lot shall not transfer to the successful Bidder and such Bidder will lose any right, title or interest such Bidder may have acquired, and the deposit paid, if any, without further notice to such Bidder. The Bidder shall nonetheless remain liable for any damages caused by the Bidder's failure to pay.

4. REMOVAL - All purchases must be removed not later than the date specified in the Auction Catalogue and/or announced at the sale. No Lot can, on any account, be removed during the sale. All goods are sold "Where Is." Removal shall be at the expense, risk, and liability of the successful Bidder. Purchases will be released only on presentation of paid invoice. Auctioneer shall not be responsible for Lots not removed within the time allowed, but Auctioneer shall have the option to remove and store at the expense and risk of the successful Bidder any article purchased, but not paid for and removed within the time required.

5. MANNER OF PAYMENT-All payments must be made by cash, bank cashier's check or company check with a bank letter of authorization guaranteeing funds to "Cincinnati Industrial Auctioneers, Inc." All checks for deposits and balances due shall be payable to the order of "Cincinnati Industrial Auctioneers, Inc." All invoices must be paid to representatives of the Auctioneer at the auction site unless otherwise announced. The full purchase price on all Lots sold to the same successful Bidder must be paid within the time fixed and before removal of any Lot.

6. DISCALIMER OF ALL WARRANTIES INCLUDING IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR PARTICULAR PURPOSE; CONDITION OF ARTICLES SOLD - The Auctioneer and any owner, seller, or secured party make no warranties express or implied as to merchantability or fitness for purpose whatsoever. All such express or implied warranties are expressly excluded hereby. No oral statement or other writing by any person negates this exclusion. If you think you have received any assurance or warranty of any kind as to a Lot offered in this auction do not bid on such item unless the Auctioneer has signed a writing specifically directed to you and identifying the Lot and stating the modification of this exclusion The Auctioneer shall not be responsible for the correct description, genuineness, authenticity of, or defect in any Lot, and makes no warranty in connection therewith. No sale will be set aside nor allowance made on account of any incorrectness, error in commentary, cataloging, or any imperfection not noted. No deduction, credit or avoidance shall be allowed on damaged articles, all Lots being exposed for public exhibition are purchased and accepted by successful Bidder "AS IS", "WHERE IS" and "WITH ALL FAULTS". Auctioneer makes no warranties or guarantees whatsoever whether written, oral or implied as to quality, quantity, condition, usability, salability, weight, measurement, age, model, mechanical condition, performance or other specifications and all sales made are utterly without recourse.

7. CLAIMS- No Claims will be allowed after removal of Lots from premises. 8. RESPONSIBILITY FOR NON-DELIVERY- Auctioneer, any owner, seller or secured party shall not, in any event, be

liable to any Bidder for non-delivery of any Lot or for any other matter or thing, other than for the return to the successful Bidder of the deposit or sum paid on said Lot, should the successful Bidder be entitled thereto. This means that if are a successful Bidder and for any reason your Lot is not made available to you, you agree that the damages you may claim for such non-delivery are limited to the amounts you have paid and you waive any claim for damages for lost profits, opportunity, the value of the Lot in excess of the purchase price, your time, expenses, incidental and consequential damages, all of which are expressly waived.

• CINCINNATI INDUSTRIAL AUCTIONEERS auctioneers I appraisers I since 1961 I cia-auction.com I [email protected] 2020 Dunlap St., Cincinnati, Ohio 45214 Phone 513-241-9701 Fax 513-241-6760

9. COMPLIANCE WITH TERMS OF SALE - In default of payment of invoices in full within the time therein specified, the Auctioneer in addition to all other remedies allowed by law, may retain all monies received as deposit or otherwise, as liquidated damages. Lots not paid for and removed within the time allowed herein may be resold at public or private sale without further notice, and any deficiency, together with all expenses and charges of resale, will be charged to the defaulting successful Bidder.

1 o. RISK TO PERSON AND PROPERTY- Persons attending during exhibition, sale, or removal of Lots assume all risks of damage of or loss to person and property and specifically release the Auctioneer from liability therefore and agree to indemnify and hold the Auctioneer harmless from any loss, claim, liability, cost, or expense caused all or in part by such person(s). Neither the auctioneer nor his principal shall be liable by reason of any defect in or condition of the premises on which the exhibition, sale, or removal of Lots is held.

11 . ADDITION TO OR WITHDRAWAL FROM SALE - The Auctioneer reserves the right to alter the order of the sale, withdrawal from the sale any of the Lots or parts thereof or to sell at this sale Lots not listed, and also reserves the right to group one or more Lots into one or more selling Lots or to subdivide into two or more selling Lots, or make any combination thereof which Auctioneer in its sole discretion determines. Whenever the best interest of the Seller will be served, the Auctioneer reserves the right to sell Lots in bulk.

12. SALE BY ESTIMATED WEIGHT, COUNT OR MEASURE - Where items are sold by estimated weight, count, or measure, the successful Bidder will be invoiced for and required to pay for the estimated weight, count, or measure. If upon delivery any shortage exists, the successful Bidder will receive a credit at the rate of the bid. If there be an excess, the successful Bidder will be required to take and pay for such excess, at the rate of the bid.

13. DISPUTE BETWEEN BIDDERS/BID INCREMENTS - If any dispute arises between two or more Bidders, the Auctioneer may decide the same or put the Lot up for sale again at once, or resell to the highest Bidder. The Auctioneer may reject a nominal or fractional bid advance in the Auctioneer's sole discretion

14. RESERVE - The Auctioneer reserves the right to reject any and all bids. On Lots upon which there is a reserve, the Auctioneer shall have the right to bid on behalf of the seller, owner or secured party and shall have no obligation to denote or announce such reserve or bid.

15. RECORDS - The record of sale kept by the Auctioneer and bookkeeper will be taken as final in the event of any dispute.

16. AGENCY- The Auctioneer is acting as agent only and is not responsible for the acts of its principals. 17. SALES TAX - All sales are subject to state and local taxes, which will be collected from the successful Bidder

unless a proper exemption certificate including tax-exempt number is presented at the time of payment. 18. BUYER'S PREMIUM - The Auctioneer in its sole discretion may impose a Buyer's Premium on any Lots sold. The

Buyer's Premium is a percentage that is added to the final purchase price of any Lot. 19. SHIPPING - All coolants, oil and fluids must be drained from all machinery and equipment prior to removal. All

of the above must be shipped in compliance with state and federal regulations. Unless otherwise expressly provided in writing, preparation and shipment shall be at the sole responsibility and cost of the successful Bidder.

20. INSURANCE - All successful Bidders, or the their riggers must provide the Auctioneer and the owner of the premises of the sale a certificate of insurance in amounts acceptable to the Auctioneer prior to removal of any Lot.

21. ADDITIONAL TERMS AND CONDITIONS - Except as set forth in Section 6 above, the Auctioneer may modify or supplement these terms and conditions of sale by language in the catalog available at the sale site or by announcement at the start of the sale.

CINCINNATI INDUSTRIAL AUCTIONEERS auctioneers I appraisers I since 1961 I cia-auction.com I [email protected] 2020 Dunlap St., Cincinnati, Ohio 45214 Phone 513-241-9701 Fax 513-241-6760

AUCTION PURCHASE & REMOVAL AGREEMENT

SPECIAL TV TOOL & MACHINE CO., INC. AND L TS INDUSTRIES, INC.

3331 Gilmore Industrial Blvd., Louisville, KV 40213 WEDNESDAY, JUL V 11, 2018 - 9:00 AM

All purchasers of items at the Specialty Tool & Machine Co., Inc. and L TS Industries, Inc. auction conducted by Cincinnati Industrial Auctioneers, Inc. hereby agree to the following:

All purchasers agree to abide by the "Terms of Sale" as listed on our website and posted at the auction premises. The Auctioneer and Owner make no warranties express or implied as to merchantability, fitness for purpose, or condition of the articles being sold. All such expressed or implied warranties are expressly excluded hereby.

All items are purchased on an "As Is, Where Is" basis, with the purchaser to incur all costs in conjunction with the removal of the items from the premises. ALL EQUIPMENT MUST BE REMOVED IN A WORKMAN LIKE MANNER AND ALL UTILITIES MUST BE CAPPED. ALL ANCHOR BOLTS MUST BE CUT OFF AT FLOOR LEVEL. ALL OILS AND COOLANTS MUST BE REMOVED FROM MACHINES PRIOR TO REMOVAL. All items are available for removal during normal business hours through Friday, July 20, 2018 at 4:00 PM at which time our representatives will leave the premises. After this time arrangements for removal must be made by appointment with the Auctioneer.

"TIME IS OF THE ESSENCE" regarding the removal of items from the premises. All items must be removed by Friday, July 27, 2018 at 4:00 PM. Any items remaining after this time will be removed and stored at the expense of the buyer, or considered abandoned and scrapped. NO EXCEPTIONS!

All purchasers and/or riggers of machinery MUST provide Cincinnati Industrial Auctioneers, Inc. and Specialty Tool & Machine Co., Inc. and L TS Industries, Inc. a certificate of insurance in the amount of $2,000,000.00 prior to removal. Cincinnati Industrial Auctioneers, Inc. Specialty Tool & Machine Co., Inc. and LTS Industries, Inc must be named on the policy as co-insurer.

There are NO REFUNDS, NO EXCHANGES, NO GUARANTEES OR NO WARRANTIES on any item. ALL SALES ARE FINAL.

Accepted By Purchaser:

Company Name

Buyer Number/ Bidspotter Username

Signature

(A

Date

Specialty Tool & Machine Co., Inc. July 11, 2018

CINCINNATI INDUSTRIAL AUCTIONEERS auctioneers I appraisers I since 1961 I cia-auction.com I [email protected] 2020 Dunlap St., Cincinnati, Ohio 45214 Phone 513-241-9701 Fax 513-241-6760

CINCINNATI IND. AUCTIONEERS, INC. 2020 DUNLAP STREET CINCINNATI, OH 45214

513-241-9701

Catalog for Auction:SPECIALTY TOOL & MACHINE CO., INC. This catalog is meant merely as a guide. The Auctioneers do not warrant the accuracy,

genuineness, authenticity, description, weight, count or measure of any of the lots specified herein.

Page1

Lot Num Qty. Description Lot Num Qty. Description

2 3 4 5 6 7 8

9

10 11 12

13 14 15

16 17 18 19

20 21 22

23 24 25 26 27 28 29

30 31 32 33 34

35

1 7-1/4" EVOLUTION RAGE MULTI PURPOSE CIRCULAR SAW

1 7-1/4" MAKITA CIRCULAR SAW 1 7-1/4" MAKITA CIRCULAR SAW 1 14" METAL DEVIL METAL CUTTING SAW 4 4-1/2" RIGHT ANGLE ELECTRIC GRINDERS 4 4-1/2" RIGHT ANGLE ELECTRIC GRINDERS 2 4-1/2" RIGHT ANGLE ELECTRIC GRINDERS

12 (LOT) 7-1/4" ELECTRIC RIGHT ANGLE GRINDER AND DYNABRADE MODEL 13415 DYNISHER ANGLE POLISHER PORTER CABLE ELECTRIC VARIABLE SPEED ROUTER

1 3" HITACHI ELECTRIC BELT SANDER 2 HEAT GUNS 1 SHRINKFAST MODEL 998UL PROPANE

TYPE HEAT SHRINK GUN 1 3/8" ASTRO PNEUMATIC POP RIVETER

21 PNEUMATIC POP RIVETERS 1 (LOT) RIDGID CORDLESS DRILLS AND

CHARGERS 6 DYNABRADE PNEUMATIC SANDERS 3 PNEUMATIC GRINDERS 1 (LOT) MISCELLANEOUS PNEUMATIC TOOLS 1 CENTRAL PNEUMATIC GRAVITY FEED

PAINT SPRAY GUN 4 FASTENAL HEAVY DUTY RIVETERS 2 COi TORQUE WRENCH

APPLE ARCHERY ELECTRIC AAROW SHAFT CUTTER FLEX MODEL LPR-1503-VRA PIPE POLISHER

1 (LOT) FILES 1 (LOT) T-WRENCHES 2 20 TON BOTTLE JACK 1 ZEBRA MODEL ZM600 LABEL PRINTER 2 ZEBRA ZP450 ANPEII LABEL PRINTER 3 SCALES, 60 LB. SPX 675 DIGITAL, 100 LB.

TOLEDO 5871, 10 LB. PELOUZE DIAL 1 OPEN 1 OPEN 1 OPEN 3 32" X 96" HEAVY DUTY STEEL TABLES 1 (LOT) MISCELLANEOUS C-CLAMPS, PLATE

LIFTERS AND MAGNETIC SHEET LIFTER WITH CART (LOT) MISCELLANEOUS TOOLS WITH CART

36

37

38 39

40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

61 62

63 64 65 66 67 68

69

70

71

72

9-DRAWER WATERLOO PORTABLE TOOL CART WITH TOOLS 1 O" DEL TA PORTABLE CONTRACTERS TABLE SAW 12" BOSCH PORTABLE MITRE SAW 8" X 12" KALAMAZOO HORIZONTAL BAND SAW

1 DE GRINDER 1 DE GRINDER 1 DE GRINDER 1 DE GRINDER 1 DE GRINDER

2" BALDOR BELT GRINDER 2" BALDOR BELT GRINDER 2" BALDOR BELT GRINDER 2" BALDOR BELT GRINDER 2" BALDOR BELT GRINDER 2" BALDOR BELT GRINDER 6" BEAVER BELT GRINDER 6" BELT GRINDER 20" WILTON PEDESTAL DRILL PRESS 16-1/2" DELTA PEDESTAL DRILL PRESS 16-1/2" DELTA PEDESTAL DRILL PRESS 16-1/2" DELTA PEDESTAL DRILL PRESS 16" JET PEDESTAL DRILL PRESS BOSCH ROUTER WITH SHOP MADE TABLE DAKE MODEL 1-1/2B ARBOR PRESS

1 SHOP MADE ARBOR PRESS STAND WITH CLAMPS

1 32" X 96" HEAVY DUTY STEEL TABLE 4 SECTIONS 42" X 144" X 150" ADJUSTABLE

BEAM PALLET RACK 1 BANDING CART WITH TOOLS 1 BANDING CART WITH TOOLS 1 BANDING CART WITH TOOLS

DAYTON DRUM TYPE SHOP VAC 2 SHOPVACS 1 28" DIAMETER PEDESTAL SHOP AIR

CIRCULATOR 28" DIAMETER PEDESTAL SHOP AIR CIRCULATOR 28" DIAMETER PEDESTAL SHOP AIR CIRCULATOR 28" DIAMETER PEDESTAL SHOP AIR CIRCULATOR 28" DIAMETER PEDESTAL SHOP AIR CIRCULATOR

C-U-S BUSINESS SYSTEMS - State of the Art Auction Software

CINCINNATI IND. AUCTIONEERS, INC. Page2 2020 DUNLAP STREET CINCINNATI, OH 45214

513-241-9701

Catalog for Auction:SPECIALTY TOOL & MACHINE CO., INC.

Lot Num Qt~. Descrii>tion Lot Num Qt~. Descri()tion

73 1 28" DIAMETER PEDESTAL SHOP AIR 99 2,200 LB. ULINE SCISSOR TYPE PALLET CIRCULATOR TRUCK



76 1 28" DIAMETER PEDESTAL SHOP AIR 102 5,500 LB. GIANT MOVE PALLET TRUCK CIRCULATOR 103 5,500 LB. GIANT MOVE PALLET TRUCK

77 28" DIAMETER PEDESTAL SHOP AIR 104 5,500 LB. WESCO PALLET TRUCK CIRCULATOR 105 1 5,500 LB. WESCO PALLET TRUCK

78 28" DIAMETER PEDESTAL SHOP AIR 106 1 5,500 LB. WESCO PALLET TRUCK CIRCULATOR 107 5,500 LB. PALLET TRUCK

79 28" DIAMETER PEDESTAL SHOP AIR 108 1 5,500 LB. PALLET TRUCK CIRCULATOR 109 1 CABLE CRANK PORTABLE DIE LIFT CART

80 28" DIAMETER PEDESTAL SHOP AIR 110 2 2-WHEEL DOLLIES CIRCULATOR . 111 1 90" X 120" HEAVY DUTY STEEL WELDING

81 1 28" DIAMETER PEDESTAL SHOP AIR TABLE CIRCULATOR 112 60" X 120" HEAVY DUTY STEEL WELDING

82 1 28" DIAMETER PEDESTAL SHOP AIR TABLE CIRCULATOR 113 3 MISCELLANEOUS HEAVY DUTY STEEL

83 1 28" DIAMETER PEDESTAL SHOP AIR WELDING TABLE CIRCULATOR 114 350 AMP MILLER SYNCROWAVE 350

84 1 28" DIAMETER PEDESTAL SHOP AIR WELDER; S/N JK677000 WITH HTP ARCTIC CIRCULATOR CHILL COOLER

85 28" DIAMETER PEDESTAL SHOP AIR 115 350 AMP MILLER MILLERMATIC 350 CIRCULATOR WELDER; S/N LH210192B

86 28" DIAMETER PEDESTAL SHOP AIR 116 350 AMP MILLER MILLERMATIC 350 CIRCULATOR WELDER; S/N MD121483N

87 28" DIAMETER PEDESTAL SHOP AIR 117 1 350 AMP MILLER MILLERMATIC 350 CIRCULATOR WELDER; S/N MB120045B

88 24" DIAMETER PEDESTAL SHOP AIR 118 1 350 AMP ESAB MODEL 353CV WELDER; S/N CIRCULATOR ME-J148009, WITH MIG 35 FEEDER

89 1 24" DIAMETER PEDESTAL SHOP AIR 119 1 350 AMP ESAB MODEL 353CV WELDER; S/N CIRCULATOR ME-J401066, WITH MIG 35 FEEDER

90 20" DIAMETER PEDESTAL SHOP AIR 120 1 350 AMP ESAB MODEL 353CV WELDER; S/N CIRCULATOR ME-J403094, WITH MIG 35 FEEDER

91 20" DIAMETER PEDESTAL SHOP AIR 121 1 350 AMP ESAB MODEL 353CV WELDER; S/N CIRCULATOR MA-J012005, WITH MIG 35 FEEDER

92 1/2 TON X 20' ARM POLE MOUNTED JIB 122 1 350 AMP ESAB MODEL 353CV WELDER; S/N CRANE WITH 1/2 TON P&H ELECTRIC CHAIN ME-182622, WITH MIG 35 FEEDER HOIST 123 1 200 AMP MILLER DYNASTY 200 TIG

93 1 3' PORTABLE SHOP LADDER WELDER; S/N LJ60509L WITH COOLMATE 3 94 1 30" PORTABLE SHOP LADDER 124 1 LINCOLN ELECTRIC HANDY MIG WELDER; 95 1 28" PORTABLE MACHINE LADDER S/N P1140800009 96 1 7' ALUMINUM LADDER 125 NELSON TYPE CD LITE STUD WELDER; S/N 97 1 2,200 LB. ULINE SCISSOR TYPE PALLET 02550163

TRUCK 126 ACETYLENE CART 98 2,200 LB. ULINE SCISSOR TYPE PALLET 127 150 KVA TELEDYNE PEER MODEL P-100-2

TRUCK SPOT WELDER; S/N 800169, 28" THROAT

C-U-S BUSINESS SYSTEMS · State of the Art Auction Software

Lot Num

128

129

130

131

132 133 134 135 136 137 138

139

140

141 142 143

144 145 146 147 148 149 150 151

152

153

154

155

156

157


513-241-9701

Page3

Catalog for Auction:SPECIAL TY TOOL & MACHINE CO., INC.

Qty. Description Lot Num

20 KVA MILLER MODEL SSW-2040ATT SPOT 158 WELDER; S/N LB022667, 16" THROAT 159 RANSOME MODEL B2-A ELECTRIC WELDING POSITIONER; S/N 0826459, 200 LB. 160 CAPACITY, 6" 3-JAW CHUCK, FOOT PEDAL, 3.3 RPPM TABLE 161 SHOP MADE MANUAL WELDING POSITIONER, 12" 3-JAW CHUCK 162 AIRCRAFTER MODEL 2A ELECTRIC WELDING POSITIONER, 8" 3-JAW CHUCK, 163 FOOT PEDAL SKID MISCELLANEOUS WELDING WIRE SKID MISCELLANEOUS HOSE AND WIRE SKID MISCELLANEOUS WELDING SUPPLIES 164 SKID MISCELLANEOUS WELDING SUPPLIES

3 MIG GUNS SKID MISCELLANEOUS WELDING SUPPLIES 60 GAL. EAGLE CRA-62 CORROSIVE MATERIAL CABINET 60 GAL. EAGLE YP1-47 FLAMMABLE MATERIAL CABINET 48" X 68" X 48" HEAVY DUTY STEEL CABINET 2-DOOR STEEL CABINET WITH CONTENTS 2-DOOR STEEL CABINET WITH CONTENTS 60" X 60" HEAVY DUTY STEEL WELDING TABLE

2 SKIDS FATIGUE MATS

165

166

167

168

2 DRUM RACKS 168A 5 JUSTRITE OILY RAG CANS 1 PORTABLE WIRE CART WITH CONTENTS 3 STEEL CABINETS 169 5 16" X 120" ROLLER CONVEYORS 170 5 STEEL SAW HORSES 4 SKIDS MISCELLANEOUS WIRE, HOSES, 171

CHAINS AND SLINGS 4 SKIDS MISCELLANEOUS MACHINE PARTS 172

AND ACCESSORIES, HARDWARE, WELDING SUPPLIES 173

4 SKIDS MISCELLANEOUS OFFICE SUPPLIES, LIGHTING, HOSE, HARDWARE 174

1 1/2 TON X 20' POLE MOUNTED JIB CRANE WITH 1/2 TON P&H ELECTRIC CHAIN HOIST 175

8 38" X 38" PORTABLE HEAVY DUTY STEEL TABLES 176

4 38" X 38" PORTABLE HEAVY DUTY STEEL TABLES 177

4 MISCELLANEOUS STEEL CARTS AND (1) 178 5-DRAWER KENNEDY STEEL FRAMED 178A BENCH

Qty. Description

3 STEEL FRAMED BENCHES 1 PORTABLE FUEL OIL POWERED HOT

WATER POWER WASHER 48" X 68" X 48" HEAVY DUTY STEEL CABINET 48" X 68" X 48" HEAVY DUTY STEEL CABINET

1 48" X 68" X 48" HEAVY DUTY STEEL CABINET

1 12' X 10' X 8' APPROX. DRIVE-IN/ PASS-THRU BOLT TOGETHER POWDER COAT BOOTH, SIDEWALL 5 HP EXHAUST, 96" WIDE X 80" HIGH DOORS (LOT) WAGNER PRIMA SPRINT AND PARKER MODEL GX7000B LONICS POWDER COAT SPRAYERS AND POWDER COAT ACCESSORIES

1 14' LONG X 10' WIDE X 8' HIGH APPROX. DESPATCH MODEL PSC3-66S-1G DRIVE IN NATURAL GAS BATCH OVEN; S/N 158743, 500 DEGREE, 100" WIDE X 80" HIGH DOOR

1 150' APPROX. TROLLY TYPE CEILING HUNG OVER HEAD CONVEYOR WITH HANGERS AND CHAINS

1 500 LB. CM SHOPSTAR ELECTRIC CHAIN HOIST

2 SECTIONS 48" X 144" X 144" ADJUSTABLE BEAM PALLET RACK

1 CONTENTS OF SHOP OFFICES INCLUDING SHELVES, DESKS, CHAIRS (NO AFFFIXED ITEMS)

1 (LOT) STOOLS, BENCHES AND SHELVES 1 (LOT) BAR STOCK, STOCK RACKS, FLOOR

GRATING 1 (LOT) MISCELLANEOUS DUST COLLECTOR

PARTS 1 SECTIONS 48" X 144" X 144" ADJUSTABLE

BEAM PALLET RACK 1 5' X 10' X 7' APPROX. BOLT TOGETHER

REAR EXHAUST PAINT BOOTH 1 24" X 42" TRIGO MODEL 42X24SL/BP BLAST

CABINET WITH DUST FILTER ABRASIVE FINISHING, INC. DUAL BURR BENCH FINISHING TUB ABRASIVE FINISHING, INC. SINGLE BURR BENCH FINISHING TUB

2 GRAYMILLS PUMPS STEEL CABINET SECTION 48' X 108" X 144" ADJUSTABLE BEAM PALLET RACK


Lot Num

179

180

181 182

183 184

185

186

187 188

189

190

191

192

193

194

195

Qty.

1

1

1

1

1

1 1

1

1

1


513-241-9701

Page4


Description Lot Num Qty. Description

5 TON X 40' APPROX. SPAN BREHOB 196 2 60" FORK EXTENSIONS SINGLE GIRDER TOP RUNNING OVERHEAD 197 1 LIFT TRUCK/ HOIST TYPE DRUM GRABBER BRIDGE CRANE WITH 5 TYON SHAW-BOX 198 1 YARD MECO PORTABLE SELF DUMPING ELECTRIC CABLE HOIST HOPPER 2 TON X 40' APPROX. SPAN BREHOB 199 1 YARD MECO PORTABLE SELF DUMPING SINGLE GIRDER TOP RUNNING OVERHEAD HOPPER BRIDGE CRANE WITH 2 TON COFFING 200 1 YARD MECO PORTABLE SELF DUMPING ELECTRIC CHAIN HOIST HOPPER 220' LONG APPROX. RAILS AND RACEWAY 201 1 YARD MECO PORTABLE SELF DUMPING 2,000 LB. AVER MODEL VLS-07 SUCTION HOPPER TYPE SHEET LIFTER 202 1 1 YARD MECO SELF DUMPING HOPPER 24" X 74" X 72" STEEL FRAMED RACK 203 1 48" X 52" RAISED LIFT TRUCK TYPE WORK LINCOLN FANUC SYSTEM 35 CNC ROBOTIC CAGE WELDING CELL; S/N E13848272, 350 AMP 204 66" X 66" X 42" HEAVY DUTY STEEL PARTS LINCOLN R350 POWER SUPPLY, FANUC CONTAINER ARCMATE 100iC ROBOT, FANUC R-30iB 205 2 SECTIONS 42" X 144" X 216" AND 48" X 144" CONTROL, LINCOLN COOL ARC 55 CHILLER, X 144" ADJUSTABLE BEAM PALLET RACK (2) 40" X 82" TABLES (NEW 2014) 206 2 SECTIONS 42" X 144" X216" ADJUSTABLE 14" X 20" DOALL MODEL 500SNC BEAM PALLET RACKS AUTOMATIC HORIZONTAL BAND SAW, PLC 207 48" X 48" SYNERGY STRETCH WRAP CONTROL, BAR FEED, 60 DEGREE SWIVEL SYSTEMS ELECTRIC ROTARY TABLE, FOOT (NEW 2015) PEDAL 9" X 16" DOALL MODEL C916 HORIZONTAL 208 10 42" X 48" COMPOSITE SKIDS BAND SAW; S/N 438-861274 209 1 SKID 12" X 19" X 6" ORBIS PLASTIC (LOT) BAND SAW BLADES STORAGE BINS 50 TON GEKA HYDRACROP 50A HYDRAULIC 210 6 24" X 42" X 12" HEAVY DUTY STEEL IRONWORKER; S/N 9028, WITH TOOLING STACKING BASKETS (NEW 1995) 211 1 44" X 48' X 28" COLLAPSIBLE PLASTIC BAILEIGH MODEL M250 HYDRAULIC TUBE BASKET BENDER WITH TOOLING (NEW 2012) 212 20 20" X 32" X 16" COLLAPSIBLE STACKING HEBO MODEL ML-100 PIPE GRINDER AND WIRE BASKETS POLISHER; S/N GH-0113-4980 (NEW 2013) 213 1 6,000 LB. FAIRBANKS DIAL PLATFORM 2007 FORD F450 XL SUPER DUTY DIESEL SCALE, 48" X 60" PLATFORM FLATBED TRUCK; VIN 1 FDXF46P17EB05096, 214 SECTION 50" X 73" X 120' ADJUSTABLE 14' BED, POWER STROKE VB POWER BEAM RACK DIESEL ENGINE, AUTOMATIC 215 8 SKIDS MISCELLANEOUS SHIPPING TRANSMISSION, 189,410 MILES SUPPLIES INCLUDING BOXES, TAPE, 2007 FORD F150 CLUB CAB GASOLINE BUBBLE WRAP, BAGS, POPCORN PICKUP TRUCK; VIN 1FTRF12217KB93252, 216 1 ROMER MODEL RA-7535-2 PORTABLE ARM. 4.2 LITER GASOLINE ENGINE, AUTOMATIC CASE, FP2 MOBILITY PACK, PROBES, 4' X 8' TRANSMISSION, 137,999 MILES X 10" GRANITE SURFACE PLATE 5,000 LB. YALE MODEL GLC050 LP GAS 217 10" MITUTOYO MODEL PJ-250 OPTICAL SOLID TIRE LIFT TRUCK; S/N E187V193902, COMPARITOR; S/N 2752 3-STAGE MAST, 82" MAST HEIGHT, 189" LIFT 218 GIDDING AND LEWIS CORDAX DISCOVERY HEIGHT, 60" FORKS, 8,278 HOURS D-28 CMM; SIN P-5089-0900, 32" X 42" STEEL 5,000 LB. YALE MODEL GLC050 LP GAS DRILLED AND TAPPED SURFACE PLATE, SOLID TIRE LIFT TRUCK; S/N N568707, RENISHAW PH10T MOTORIZED PROBE, 3-STAGE MAST, 82" MAST HEIGHT, 190" LIFT RENISHAW PHC10-2 CONTROLLER, TP20 HEIGHT, 42" FORKS, 17,412 HOURS TOUCH PROBE, (2) STANDARD FORCE

2 42" FORKS MODULES, PC. MONITOR AND PRINTERS

C-U-S BUSINESS SYSTEMS • State of the Art Auction Software


513-241-9701


Pages

Lot Num Qty. Description Lot Num Qty. Description

219 24" MITUTOYO ABSOLUTE DIGIMATIC HEIGHT GAGE (NEW)

248 1 112 TON X 20' POLE MOUNTED JIB CRANE WITH 112 TON P&H ELECTRIC CHAIN HOIST

220 18" MITUTOYO ABSOLUTE DIGIMATIC 249 1 43" X 15' AMERICAN PACEMAKER GEARED

221

222 223

224

225 226 227 228 229 230 231 232 233

234

235

235A

236 237 238 239 240

241 242

243

244

245

246

247

HEIGHT GAGE (NEW) 1 18" BROWN AND SHARPE MODEL 588

HEIGHT GAGE 1 12" DIAL HEIGHT GAGE 250 1 19" BROWN AND SHARPE 583 HITE-SET 251

HEIGHT GAGE 252 12" CADILLAC MODEL HG-12 PLA-CHEK 253 HEIGHT GAGE 254

10 INSPECTION GAGE STANDS 255 1 (LOT) PARALLELS 256 1 (LOT) PARALLELS 257 4 .251-.500 PIN GAGE SETS 7 MISCELLANEOUS PIN GAGE SETS 1 24" X 36" X 4" GRANITE SURFACE PLATE

18" X 24" X 3" GRANITE SURFACE PLATE 258 12" X 18" X 3" GRANITE SURFACE PLATE 259 KING PORTABLE BRINELLS HARDNESS TESTER WITH BRINELLS SCOPE

4 STARRETT MODEL 1130 EXTERNAL TREAD GAGES 260 18-DRAWER BENCH WITH MISCELLANEOUS 261 INSPECTION GAGES INCLUDING CALIPERS, MICROMETERS, BLOCK GAGES, CHAMFER GAGES 262 CONTENTS OF OFFICE; (1) DESK, (2) 263 CHAIRS, BOOKSHELF, FILE CABINET 264

1 16" - 20" SPI OUTSIDE MICROMETER 1 6" - 12" MITUTOYO MICROMETER 1 .7 - 6" MITUTOYO BORE GAGE 1 40" MITUTOYO CF DIGIMATIC CALIPER 265 1 18" MITUTOYO ABSOLUTE DIGIMATIC

CALIPER 24" MITUTOYO VERNIER CALIPER 266 36" X 96" PORTABLE HEAVY DUTY STEEL 267 TABLE 268 CONTENTS OF ROOM, MACHINE PARTS, LIGHTING, MAINTENANCE, SHELVES, NO. 2 FILE CABINETS 269 CONTENTS OF LOFT; MACHINE PARTS, HARDWARE, RACKS (NO A/C UNIT) 270 54" ARM X 96" WIDE X 144" HIGH SINGLE 271 SIDED HEAVY DUTY STEEL CANTILEVER RACK

1 54" ARM X 96" WIDE X 144" HIGH SINGLE SIDED HEAVY DUTY STEEL CANTILEVER 272 RACK

1 60" X 144" X 100" HEAVY DUTY STEEL RACK 273

HEAD LATHE, SPINDLE SPEED 6-600 RPM, 28" 4-JAW CHUCK, 2-314" SPINDLE HOLE, TAPER QUICK RELEASE TOOLHOLDER 34" CHUCK PLATE 28" STEADY REST 16" STEADY REST 16" STEADY REST (LOT) TOOLING LARGE CAPACITY TOOLHOLDER 15" X 54" AMERICAN PACEMAKER GEARED HEAD LATHE, SPINDLE SPEED 25-1,500 RPM, 1-314" SPINDLE HOLE, TAPER, 12" 3-JAW CHUCK

1 QUICK RELASE TOOLHOLDER 1 17" X 60" CLAUSING-COLCHESTER GEARED

HEAD LATHE, SPINDLE SPEED 20-1,600 RPM, 12" 3-JAW CHUCK, 3" SPINDLE HOLE, STEADY REST QUICK RELEASE TOOLHOLDER 17" X 60" CLAUSING-COLCHESTER GEARED HEAD LATHE, SPINDLE SPEED 20-1,600 RPM, 12" 3-JAW CHUCK, 3" SPINDLE HOLE QUICK RELEASE TOOLHOLDER SHOP BUILT CENTERING MACHINE 20" X 60" ROM I-BRIDGEPORT EX-PATH-II SD FLAT BED CNC ENGINE LATHE, 12" 3-JAW CHUCK, 2-112" SPINDLE HOLE, STEADY REST, BRIDGEPORT BPCT DRO 15" X 60" SHARP 1560S ENGINE LATHE, 7" COLLET CHUCK, 10" 3-JAW CHUCK, 1" SPINDLE HOLE

1 QUICK RELEASE TOOLHOLDER 1 (LOT) MISCELLANEOUS TOOLING

(LOT) TOOLING INCLUDING MORSE TAPER DRILLS, TOOLHOLDERS, CENTERS, WITH RACK 4-DOOR STEEL CABINET AND RACK WITH CONTENTS (LOT) MISCELLANEOUS TOOLING GRAFFENSTADEN MODEL F.V.102 UNIVERSAL MILLING MACHINE; SIN 203204, SPINDLE SPEED 32-1,600 RPM, 12" X 52" TABLE 20" DOALL MODEL 2013V VERTICAL BAND SAW; SIN 457-87406 DC MORRISON KEYSEATER; SIN K97-5222


Lot Num

274

275

276 277

277A 278

279

280 281

282 283

284

285 286 287

288

289

290

291

292


513-241-9701


Page&

Qty. Description Lot Num Qty. Description

SHOP MADE HYDRAULIC H-FRAME PRESS 293 1 (LOT) MISCELLANEOUS MACHINE WITH HYDRAULIC PUMP SUPPLIES. HARDWARE, VISE JAWS WITH (2) GREAVES HORIZONTAL MILLING MACHINE, STEEL RACKS SPINDLE SPEED 25-1,250 RPM, 12" X 52" 294 (LOT) MISCELLANEOUS MACHINE PARTS, TABLE TOOLING, HARDWARE 3" PNEUMATIC VISE 295 WARNER AND SWASEY NO. 5 TURRET GREAVES HORIZONTAL MILLING MACHINE, LATHE; SIN 571847, 6-POSITION TURRET, 10" SPINDLE SPEED 20-1,000 RPM, 12" X 52" 3-JAW CHUCK, 2-314" SPINDLE HOLE, TABLE COOLANT INDEXABLE MILLING ATTACHMENT 296 36" OIL GEAR BROACH MACHINE; SIN 6017, 4 HP BRIDGEPORT SERIES II VERTICAL 600 RPM MILLING MACHINE; SIN 6608, SPINDLE 297 1 BROACH TOOLING SPEED 50-3,500 RPM, 11" X 58" TABLE, QUILL 298 1 25 HP INGERSOLL-RAND MODEL UP6-25-125 POWER FEED, ACU-RITE Ill DRO, COOLANT HORIZONTAL TANK AIR COMPRESSOR; SIN 2 HP BRIDGEPORT SERIES I VERTICAL CBV330067, 7,305 LOAD HOURS, 20,946 RUN MILLING MACHINE; SIN 214552, SPINDLE HOURS SPEED 60-4,200 RPM, 9" X 42" POWER 299 25 HP INGERSOLL RAND HORIZONTAL TABLE, NEWALL DRO TANK AIR COMPRESSOR 6" MACHINE VISE 300 1 ULTRA AIR MODEL UA10UAC AIR DRYER; 2 HP BRIDGEPORT VERTICAL MILLING SIN U-14118 MACHINE; SIN 255151, SPINDLE SPEED 301 1 ULTRA AIR MODEL UAA-120-1 AIR DRYER; 60-4,200 RPM, 9" X 42" POWER TABLE, SIN X12196 POWER DRAWBAR, ACU-RITE Ill DRO 302 1 176 TON X 157" ADIRA MODEL QHD-16040 6" MACHINE VISE CNC PRESS BRAKE; SIN 314 HP BRIDGEPORT 8-SPEED SERTICAL ME1-005584-6721-12395, 157" OVERALL MILLING MACHINE; S/N 105965, SPINDLE LENGTH, 124" BETWEEN HOUSING SPEED 80-2,720 RPM, 9" X 48' POWER CYBELEC MODEVA 10S CONTROL, BACK TABLE, ACU-RITE DRO GAGE (NEW 2006) 2 HP BRIDGEPORT VERTICAL MILLING 303 1 160" 4-WAY DIE MACHINE; SIN 354556, SPINDLE SPEED 304 77 TON X 98" ADIRA MODEL QHD-7025 CNC 60-4,200 RPM, 9" X 42" POWER TABLE, HYDRAULIC PRESS BRAKE; SIN ACU-RITE Ill DRO 15446-10107, 98" OVERALL LENGTH, 80" (LOT) HOLD DOWNS BETWEEN HOUSING, CYBELEC MODEVA (LOT) DRILLS AND RACK IOS CONTROL, BACK GAGE (NEW 2006) (LOT) MISCELLANEOUS TOOLING AND 305 100" 4-WAY DIE 2-DOOR CABINET 306 77 TON X 98" ADIRA MODEL QHD-7025 CNC (LOT) MISCELLANEOUS TOOLING AND HYDRAULIC PRESS BRAKE; SIN FIXTURES INCLUDING TOOLHOLDERS, 15446-10107, 98" OVERALL LENGTH, 80" V-BLOCKS, ANGLE PLATES, DRILLS, BETWEEN HOUSING, CYBELEC CONTROL, HOLDDOWNS AND (2) STEEL RACKS BACK GAGE (NEW 2000)

1 11" X 36' SHELDON SHOP LATHE; SIN 307 3 HP CHEVALIER VERTICAL MILLING TXE16633, COLLET CHUCK, QUICK RELEASE MACHINE; SIN NIA, SPINDLE SPEED 60-4,500 TOOL HOLDER RPM, 9" X 42" POWER TABLE, ACU-RITE Ill

1 6" X 12" HARIG SUPER 612 HAND FEED DRO GRINDER; SIN NIA 308 1 6" MACHINE VISE

1 6" X 12" BROWN AND SHARPE NO. 2B HAND FEED GRINDER; SIN NIA

1 FARRELL-SELLERS TOOL GRINDER


Lot Num

309

310

311

312

313

314

315 316 317 318 319 320

321

322

323

324


513-241-9701

Page7


Qty. Description Lot Num

MAZAK NEXUS 510C-II CNC VERTICAL 325 MACHINING CENTER; S/N 219440, MAZAK 326 NEXUS MAZATROL CONTROL, 21" X 51" 327 TABLE, 41" X 20" X 20" TRAVELS, 40 TAPER, CHIP CONVEYOR, 30 STATION AUTOMATIC 328 TOOL CHANGER (NEW 4/2010) SMW 4TH AXIS TABLE, 9" CHUCK FACE WITH ROTARY TOMBSTONE, 8" 3-JAW CHUCK MAZAK NEXUS 510C-II CNC VERTICAL MACHINING CENTER; S/N 189264, MAZAK 329 NEXUS MAZATROL CONTROL, 21" X 51" TABLE, 41" X 20" X 20" TRAVELS, 40 TAPER, CHIP CONVEYOR, 30 STATION AUTOMATIC 330 TOOL CHANGER (NEW 11/2006) SMW 4TH AXIS TABLE, 10" CHUCK FACE 331 WITH ROTARY TOMBSTONE 332

1 MAZAK MODEL VTC-20C CNC VERTICAL MACHINING CENTER; SIN 123281, 20" X 78" TABLE, 40 TAPER, MAZATROL M PLUS CONTROL

1 4-DRAWER STEEL FRAMED LIGHTED SHOP BENCH WITH TOOLING AND HOLD DOWNS 333 AND 5" BENCH VISE FLEX ARM PNEUMATIC PEDESTAL HOIST

1 FLEX ARM PNEUMATIC GRINDER 334 90 CAT 40 TOOLHOLDERS WITH CART 335 34 CAT 40 TOOLHOLDERS WITH CART 62 CAT 40 TOOLHOLDERS WITH CART

1/2 TON X 20' POLE MOUNTED JIB CRANE WITH 1/2 TON YALE ELECTRIC CHAIN HOIST 3,500 WATT MITSUBISHI MODEL 336 ML-3015-LVP(S) SHUTTLE TABLE CNC LASER; S/N LH-16659, MODEL ML35CF 337 RESONATOR MODEL LC20BP2 CONTROL, 338 122" X-AXIS, 61" Y-AXIS, 4.72" Z-AXIS, (2) 61" X 120" BURN TABLES, THERMAL CARE 339 HQ2A1603LXA CHILLER, 45 AND 75 KVA TRANSFORMERS (NEW 2002) 10 HP TORIT MODEL DFT2-8 DUST COLLECTOR; S/N 3307715-1

1 3,500 WATT MITSUBISHI MODEL 340 ML-3015-LZP SHUTTLE TABLE CNC LASER; S/N 6930LVP06, CONTROL, 122" X-AXIS, 61" Y-AXIS, 3.93' Z-AXIS, (2) 61" X 120" BURN 341 TABLES, ELECTRICAL BOX, THERMAL CARE MODEL HQ2A16LX2 CHILLER, 45 AND 75 KVA 342 TRANSFORMERS

1 7.5 HP TORIT MODEL 2DF6 DUST 343 COLLECTOR; S/N IG578292-001 344

Qty. Description

1 (LOT) LASER TABLE GRILLS WITH CART 1 (2) STEEL FRAMED BENCHES 1 SECTION 42" X 96" X 112" ADJUSTABLE

BEAM PALLET RACK 1 MAZAK MODEL UQ NEXUS 250-11 CNC

TURNING CENTER; S/N 248037, MAZATROL MATRIX NEXUS CONTROL, 8" 3-JAW CHUCK, 12 POSITION TURRET, TAILSTOCK, CHIP CONVEYOR (NEW 2013) '''SUBJECT TO OVERALL"' LNS MODEL QL880-52 MAGAZINE BAR FEED; S/N 27075901, DRO (NEW 2013) '"SUBJECT TO OVERALL"' AIR FLOW SYSTEMS MINI-PAC PORTABLE AIR CLEANER "'SUBJECT TO OVERALL"'

1 OVERALL LOTS 328-330 MAZAK MODEL UQ NEXUS 250-11 CNC TURNING CENTER; S/N 189208, MAZATROL MATRIX NEXUS CONTROL, 8" 3-JAW CHUCK, 12 POSITION TURRET, TAILSTOCK, CHIP CONVEYOR (NEW 2006) '*'SUBJECT TO OVERALL'" LNS MODEL QL SERVO 80 MAGAZINE BAR FEED; S/N 320010 "'SUBJECT TO OVERALL'"

1 OVERALL LOTS 332-333 1 MAZAK MODEL QTN-20 CNC TURNING

CENTER; S/N 120249, MAZATROL T-PLUS CONTROL, 8" COLLET CHUCK, 8-POSITION TURRET, TAILSTOCK, CHIP CONVEYOR (NEW 1996)

1 SMW MODEL QUCIK 7.52 HYDRAULIC BAR FEED WITH HYDRAULIC PUMP

1 OVERALL LOTS 335-336 1 (LOT) MISCELLANEOUS TOOLING AND

COLLETS WITH (2) STEEL FRAME BENCHES MAZAK MODEL AJV-25/404 CNC MACHINING CENTER; S/N 77915, MAZA TROL M-32 CONTROL, 22" X 48" TABLE, 24 STATION AUTOMATIC TOOL HOLDER (SPINDLE OUT OF MACHINE - OUT OF SERVICE) (LOT) MISCELLANEOUS TOOLING AND HOLD DOWNS WITH STEEL FRAME LIGHTED BENCH 1/2 TON X 20' POLE MOUNTED JIB CRANE WITH 1/2 TON P&H ELECTRIC CHAIN HOIST

2 12-DRAWER CABINETS WITH MISCELLANEOUS TOOLING

2 8" HYDRAULIC KURT VISES 1 6" KURT MACHINE VISE


CINCINNATI IND. AUCTIONEERS, INC. Pages 2020 DUNLAP STREET CINCINNATI, OH 45214

513-241-9701


Lot Num Q!}<. Descri(ltion Lot Num Q!}<. Descri(ltion

345 6" KURT MACHINE VISE 383 1 (LOT) INDEXIBLE TOOLING, VISE JAWS, 346 6" KURT MACHINE VISE COLLETS, WITH STEEL RACK 347 6" KURT MACHINE VISE 384 2 SKIDS DRILLS, ENDMILLS, TOOLING, 348 6" KURT MACHINE VISE CARBIDE INSERTS, INSPECTION 349 6" MACHINE VISE 385 (LOT) CHUCKS, STEADY REST, 350 6" MACHINE VISE MISCELLANEOUS TOOLING 351 6" MACHINE VISE 386 1 (LOT) MISCELLANEOUS FIXTURES 352 1 6" MACHINE VISE 387 1 OPEN 353 6" MACHINE VISE 388 1 OPEN 354 1 5" MACHINE VISE 389 1 SHARPE MODEL MX3100N COLOR COPIER 355 1 5" MACHINE VISE 390 1 REMAINING CONTENTS IN ROOM, (2) 356 1 5" MACHINE VISE DESKS, (2) CHAIRS, FILING CABINET 357 1 4" KURT MACHINE VISE 391 HP LASERJET 8150N PRINTER 358 1 4" KURT MACHINE VISE 392 CONTENTS OF ROOM, DESK, (2) CHAIRS, 359 1 4" KURT MACHINE VISE TABLE 360 4" KURT MACHINE VISE 393 EPSON 3LCD PORTABLE PROJECTOR 361 4" KURT MACHINE VISE 394 CONFERENCE TABLE WITH (8) CHAIRS 362 6" PALMGREN ANGLE SINE VISE 395 FRIDIGAIRE REFRIGERATOR 363 6" LBS ANGLE SINE VISE 396 2 MICROWAVE OVENS AND TOASTER 364 4" ANGLE VISE 397 8 TABLES 365 8" MACHINE VISE 398 50 FOLDING CHAIRS AND CART 366 4" KURT 2-SIDED VISE 399 1 42" HISENSE FLATSCREEN TV AND DVD 367 2 VISE SWIVEL PLATES PLAYER 367A 1 42" X 108" HEAVY DUTY STEEL TABLE .. ,1 400 5 MISCELLANEOUS SHELVES

WEEK DELAYED REMOVAL ... 401 1 L-SHAPED DESK, (3) CHAIRS, BOOKSHELF 368 SHOP MADE CENTERING GRINDER (NO CABINET FIXTURE) 369 1 DUMORE TOOL POST GRINDER 402 1 (LOT) HP OFFICE PRO 8600 ALL IN ONE 370 1 DRILL DOCTOR DRILL BIT SHARPENER PRINTER, MONITOR, KEYBOARDS 371 1 48" X 96" PORTABLE HEAVY DUTY STEEL 403 DESK, (2) CHAIRS, TABLE (NO ATTACHED

SHELF WITH MISCELLANEOUS TOOLING, FIXTURES) HOLD DOWN, TOOLHOLDERS, END MILLS, 404 CONTENTS OF OFFICE DESK, TABLE, (2) TAPS, REAMERS, INSERTS CHAIRS, (2) BOOKSHELVES (NO ATTACHED

372 1 PEMSERTER SERIES 4 PNEUMATIC PRESS; FIXTURES) S/N L4-5482, 18" THROAT (NEW 2011) 405 CONTENTS OF OFFICE; (2) DESK, (3)

373 HAAS 4TH AXIS TABLE WITH 38" CHUCK CHAIRS, (3) FILE CABINETS, BOOKSHELF, 374 18" TROYKE ROTARY TABLE LATERAL CABINET 375 CINCINNATI DIVIDING HEAD 406 CONTENTS OF OFFICE; U-SHAPED DESK, 376 18" X 28" PORTABLE STEEL T-SLOTTED CHARI, BOOKSHELF, (60 FILE CABINET

TABLE 407 LEATHER LOVE SEAT 377 24" X 36" X 20" T-SLOTTED BOX TABLE 408 1 CONTENTS OF OFFICE; DESK, FILE 378 23" X 23" T-SLOTTED TABLE RISER CABINET, (4) CHAIRS (NO ATTACHED 379 (LOT) ANGLE PLATES FIXTURES) 380 5-DRAWER WATERLOO TOOLBOX WITH 409 1 CONTENTS OF OFFICE SUPPLIES - OFFICE

CONTENTS SUPPLIES ONLY (NO PHONE OR PA 381 1 12-DRAWER CABINET WITH CONTENTS; SYSTEM)

DRILLS, ENDMILLS, REAMER, TAPS 410 1 CONTENTS OF OFFICE; DESK, (2) CHAIRS, 382 11-DRAWER LYON CABINET WITH (2) TABLES, BOOKSHELF (NO ATTACHED

CONTENTS; CARBIDE INSERTS, BORING FIXTURES) BARS, INDEXABLE TOOLING, HARDWARE, 411 GE REFRIGERATOR COLLETS 412 MICROWAVE AND TOASTER OVEN


SALE CATALOG

Documents

Transcript of SALE CATALOG