SHUR-KUT® Quick Change Disc Kits

Each kit contains 20 of the most popular Shur-Kut® quick-change discs.

CONTENTS:• (5) 2" discs each

in A/O 36, 60, 80 & 120 grit.

• (1) Medium density holder with 1/4" shank.

Type R KitPart No. 1-613-37500Type S KitPart No. 1-613-34309Reg. Net Price $24.24

4" Self-Centering ViseDesigned to provide reliable, consistent workholding for your manufacturing needs!

Part No. 1-903-RWP502Reg. Net Price $1,880.18

$1,69000

$175SAVEOVER

SPECIAL KBC

FEATURES:• Clamping rails are an alternative mounting option when utilizing swing clamps to hold your

workholding products to the machine table/pallet.• Jaws adjust from either end of vise to auto- matically position work piece in center of vise.• Segment screw for added rigidity.• Utilizes 2 dowel pins: one for centering and one for locating.• Repeatability: 0.001"• Centering Tolerance: ±0.0005"

SPECIFICATIONS:Jaw Width / Height .. 3.94" / 1.01"Max. Jaw Opening ............................. 2.5"/5.62"*Vise Length ................................................ 6.49"Bed Height ................................................. 1.96"Max. Clamping Force .......................... 4,000 lbs.Weight ..................................................... 14 lbs.* Jaws may be reversed for larger 5.62" opening.

Dial Indicatorswith NIST Certificate of Calibration

Part No. Reg. Face Color 52-520 Net Price

WhiteBlack

-110W-110B

$50.6050.60

$34.5034.50

SALE!

Punch & Die Set

FEATURES:• Traditional style punch & die set.• Economical way to make washers, shims, and gaskets.• Clear plastic top plate marked with accurate center lines.• Cut stainless and blue tempered shim up to .010" thick.• Base and punches are made of hardened and ground A-2 tool steel.• Cut steel, brass, copper, aluminum, rubber, and plastic up to .025" thick.

Part No. 1-958-315Reg. Net Price $129.50

$10360 9 PUNCH SIZES INCLUDED:1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4"

14-1/2" Capacity Gravity FeedVertical Saw

FEATURES:• 1 HP Motor, 1 Phase.• Accepts blades from 1/4"-3/4" wide.• Accurate gravity feed with hydraulic

speed control and depth stop.• Speeds (4): 70-525 SFPM• Rugged simple construction for easy

maintenance and long service life.• Shipping Weight: 700 lbs.

Model EFPart No. 6-398-005

$5,19500FINANCE AS LOW AS $119.49/mo.CALL FOR DETAILS

For fasteners between 1/4" & 3/4" dia. Applied to threaded components be-fore assembly, it has con-trolled lubricity for accurate clamp loads. Parts can be separated using hand tools.

242™ ThreadlockerMedium Strength / Blue

FEATURES:• Graduation: .001"• Range: 0-1"• Reading: 0-.100• 4-48 Thread.• Tolerance markers.

• Solid brass housing.• AGD 2 Series.• Supplied with lug back.• Carbide contact points.• Meets ANSI specs for accuracy.

$16.9547.16

Bottle Part No. Reg. Size 1-444- Net Price

-24221-24231

10 ml50 ml

$14.4140.09

SALE!

YOUR CHOICE$1995

41 LED FLASHLIGHTFREE

With Any Online Order $14900 or More!

Valid 9/1/19 - 10/31/19Registered Customers Only.One Time Use.

COUPON CODE:FLA919U

Part No. 1-909-60195

KBCTools.comWEB:

1-800-521-1740PHONE: M-F 8am - 8pm, EST

1-800-322-4292FAX: FAX ORDERS 24/7

SEP-OCT 2019

Industrial Metalworking Tooling & Solutions Since 1965

Check out the bigred lockers outside our KBC Michigan location.Just order during regular business hours and pick up your order anytime!Your tools... your time.

24/7 All Tools...All The Time.

24/7 PICK-UP LOCKERS

Call: 1-800-521-1740 Fax: 1-800-322-4292 Web: KBCTools.com2

Industrial Metalworking Tooling & Solutions Since 1965Cutting Tools ..................................... 2-7, 36Carbide Tooling ................................ 8-9, 35Fluids ......................................... 1, 2, 32, 36Workholding Tools ................ 1, 2, 10-13, 35Abrasives .................................. 1, 14-15, 35Measuring & Inspection .............. 1, 3, 16-21Toolroom Accessories .................... 1, 22-23Hand Tools .............................................. 33Shop Supplies ................................ 3, 30-31Power / Air Tools ..................................... 34 Machinery ....................................... 1, 24-29

GSA Contract #BPA-GS-06F-4KBCT

100% SATISFACTIONGUARANTEED: If you are not 100%satisfied for any reason just return the unused item(s) in its original packaging within 30 days, with your receipt for a replacement,exchange, full credit or refund.

DAMAGED, LOST, OR SHORT SHIPMENTS: It doesn’t happen often, but if it does, call your local courier office immediately, and advise KBC so that we can reship and place a claim. Please keep dam-aged goods and containers until the claim is closed.

TRUCK SHIPMENTS: KBC is not responsible for merchandise damaged or lost by motor freight carriers. If the shipment is damaged or short one or more packages, please have it noted by the truck driver on receipt and freight bill. If you accept a short or damaged shipment from the truck driver without proper notation by the driver, you do so at your own risk.

PRICING: KBC Tools & Machinery traditionally holds prices for the duration of its sales flyers. As industrial market conditions continue to change across North America (tariffs, raw material, and price increases), KBC reserves the right to change prices based upon inventory conditions and supplier price increases without notice. BUY NOW! KBC Tools & Machinery strives to be your choice for all your tooling needs.

MINIMUM ORDER: Only $25.00, to cover processing costs.

OOPS!: Errors do occur, so mistakes are subject to correction. Sorry for any inconvenience.

SAT ISFACTION

* Excludes Machinery & Non-Stock Items.

99% of All Orders Ship the Same Day... Or you can Pick Up at your Local Branch.* Your Choice.

QUICK INDEX

Somerestrictions may apply.

FLAT RATESHIPPING

On All Online Ordersup to 50 lbs.

With Any Online Order $14900 or More!

PLUSFREE

Valid 9/1/19 - 10/31/19Registered Customers Only.

One Time Use.

FEATURES:• Blades automatically adapt

to any thread pitch.• The blades have axial play

and will automatically adjust themselves into the

thread grooves.• Can be used on right hand

or left hand threads.• Applicable to all forms of

standard and metric threads.

NES Thread Cleaner & Restorer

$72.20105.45296.80

Model Part No. Reg. No. Threads 1-842- Net Price

-601-602-606

FOR 60O THREADS

NES 1 5/32" - 3/4" (4-19mm) NES 2 11/16" - 1-1/2" (17-38mm) NES 3 1-3/8" - 6" (35-152mm)

$61.3789.63

252.28

SALE!

NES SET1 of Each: NES 1, NES 2, NES 1R, NES 2RPart No. 1-842-605Reg. NetPrice $197.95

$16826

Threaded Boring HeadShanks & Adapters

Adjustable Boring HeadsROUND STYLE

Boring Center Dist. Bar Hole Between Threaded Part No. Reg. Dia. OAL Size Holes Offset Back 1-573- Net Price 2" 2.406" 3/8" 5/8" 5/8" 7/8"-20 2 2.406 1/2 5/8 5/8 7/8"-20 3 3.156 3/4 15/16 1 1-1/2"-18 4 3.867 1 1-1/4 1-5/8 1-1/2"-18

$357.95357.95508.10725.05

-1025-102-103-104

SALE!$322.16

322.16457.29652.55

$215.25227.10

Retention Knob Reg. Dia. Proj. Thread Thread Part No. Net Price

2" 1.88" 5/8"-11 3" 1.88 5/8"-11

1-5737-0401-5738-040

CAT 40 V-FLANGE

7/8"-201-1/2"-18

$193.73204.39

SALE!

MORSE TAPER Tang Type

$78.55124.35 135.15146.00

Reg. No. Thread Part No. Net Price

2334

1-5737-0021-5737-0031-5738-0031-5738-004

SALE!7/8"-207/8"-20

1-1/2"-181-1/2"-18

$70.70111.92 121.64131.40

STRAIGHT SHANK

$42.2542.25 60.1085.50

Reg. Diameter Thread Part No. Net Price 3/4" 1 1 1-1/4

1-5737-0131-5737-0151-5738-0151-5738-016

SALE!7/8"-207/8"-20

1-1/2"-181-1/2"-18

$38.0338.03 54.0976.95

R-8

$81.50105.20

Retention Reg. Thread Thread Part No. Net Price

7/16"-20 1-5737-0101-5738-010

SALE!7/8"-20

1-1/2"-18$73.35

94.68

QuickTite®

Instant AdhesiveFEATURES: • New self-piercing, no clog tip.• Virtually indestructible construction.• Continuous flow or drop control.• Improved dispensing control and accuracy. • Spill proof design keeps hands clean.• Locking cap collar prevents leaks and hardening.

4 gm BottlePart No.

1-444-39202Reg. Net

Price $7.09

$603

41 LED FLASHLIGHT

COUPON CODE:FLA919U

Part No. 1-909-60195

Major Credit Cards Accepted: 3Subscribe @ KBCTools.com to Get Exclusive Email Offers.

Coolant ProofDigimatic MicrometersWith SPC Output

FEATURES:• Ratchet stop.• Graduation: .00005" (.001mm)• Auto power on/off function.• IP65 protection level, enabling use in environments exposed to cutting oil, etc. Anti-corrosion treatment is required after use.• Measurement data output function is available with a water-resistant connection.• Certificate of inspection is included. (It is not the type used to obtain calibration certificates.)

Range: 0-1" (0-25mm)Part No. 1-808-293330Reg. Net Price $247.00

$20995

Range: 1-2" (25-50mm)Part No. 1-808-293331Reg. Net Price $291.00

$24735

Supplied ina fitted case.

Series 293

ABSOLUTE DigimaticCalipersWith SPC Output

FEATURES:• Resolution: .0005" (.01mm).• Large and clear LCD readout.• The ZERO/ABS key allows the display to be Zero-Set at any slider position along the scale for incremental comparison measurements. This switch will also allow return to the absolute (ABS) coordinate and display of the true position from the origin point (usually jaws-closed point).• Thumb roller included.

Mitutoyo's Digimatic Caliper is the next generationof electronic calipers. It keeps track of its origin pointonce set. Whenever turned on, the large LCD screendisplays the actual slider position ready to start measurement.No more repeated zero setting is necessary with the absoluteencoder technology as well as no more care for overspeed errors.

Part No. Reg. Range 1-808- Net Price

0-6" (0-150mm) 0-8" (0-200mm) 0-12" (0-300mm)

-500171-500172-500173

$188.00248.00541.00

$159.80210.80459.85

SALE!

Series 500

Supplied in a fitted case.

Designed for pinpoint accuracyand superior ergonomics. You’llfeel the difference. The Guardair LazerTM

Series Safety Air Gun sets a standardfor power, convenience, and comfort.

FEATURES:• All metal construction, unique shape, and soft rubber over-molded trigger conforms to any hand.• Ergonomic grip reduces hand fatigue.• Ready for use with any 1/4" NPT inlet connector.• 1/8" NPSM outlet for optional safety nozzles.• Meets OSHA 1910.242(b) Regarding Output Pressure.

Palm/Thumb Actuated Gun

Lazer™ Jet Safety Air Gun

Model LZR600Part No. 1-816G-LZR600

Reg. Net Price $17.46

$1484

®WorkForce® RubberAir Hose Assemblies

50’ Hose (HRE3850RD2)Part No.1-914L-002Reg. NetPrice $42.42

$3295

FEATURES:• VRMA Class C medium oil resistance inner tube.• Reinforced synthetic rubber tube and cover with a synthetic yarn weave for extra strength and flexibility.• Bend restrictors reduce wear, making hose last longer.

25’ Hose (HRE3825RD2)Part No.1-914L-001Reg. NetPrice $24.22

$1795

Workforce® rubber hose assembliesare designed for a wide range of industrial,construction and agricultural applications.

SPECIFICATIONS:Working Pressure ......................... 300 PSIMax. Burst Pressure .................. 1,200 PSIBrass NPT Fittings .................... 1/4" MNPTI.D. Hose .............................................. 3/8"Color .................................................... Red

10-24 NC 3 H-3 10-32 NF 3 H-3 1/4-20 NC 3 H-3 1/4-20 NC 3 H-5 1/4-28 NF 3 H-3 1/4-28 NF 3 H-5 5/16-18 NC 3 H-3 5/16-18 NC 3 H-5 5/16-24 NF 3 H-3 5/16-24 NF 3 H-4 3/8-16 NC 3 H-3 3/8-16 NC 3 H-5 3/8-24 NF 3 H-3 3/8-24 NF 3 H-4 7/16-14 NC 4 H-5 7/16-20 NF 4 H-5 1/2-13 NC 4 H-3 1/2-13 NC 4 H-5 1/2-20 NF 4 H-3 1/2-20 NF 4 H-5

Ground No. of Thread Part No. Reg. Size Flutes Limits 1-351- Net Price

$18.0518.0523.3523.3523.3523.3525.4025.4025.4025.4028.6528.6528.6528.6537.0537.0043.0543.0543.0543.05

$14.4414.4418.6818.6818.6818.6820.3220.3220.3220.3222.9222.9222.9222.9229.6429.6034.4434.4434.4434.44

-7350281-7350299-7350283-7350282-7350301-7350300-7350285-7350284-7350303-7350302-7350287-7350286-7350305-7350304-7350288-7350306-7350290-7350289-7350308-7350307

SALE!

DIN ANSIBlue SharkSpiral Pointed Taps For Stainless Steel

SHARK LINE

FEATURES:• Color ring coding helps identify suitability for specific materials and enables quick and easy tool selection.• Advanced Geometry & Chamfer - Thread geometry with optimized form generates low torque, excellent threads at both high and low speeds, and superior surface finish. Significant reduction in axial forces and torque compared to conventional taps ensuring problem-free threading of blind and through holes in the selected material.• Standard ANSI shank and square with DIN overall length, for extra reach and compatibility with Inch Standard Tap Holding.

Super-B (TiAlN + WC/C) coating with additional edge treatment. Manufactured from a unique powder metallurgy tool steel different from any other HSS-E-PM. This provides an unbeatable combination of toughness and edge strength, allowing the taps to perform at higher cutting temperatures while offering excellent performance and longer tool life.

PLUG STYLE

TAKE A BITE OUT OF THREADING.

More information and complete listing of Dormer Shark Taps @ KBCTools.com

FEATURES:• Convenient hanging hook.• Durable cast aluminum body.• Delivers high thrust with pinpoint accuracy.• Knurled adjusting nut controls air volume.• 1/4" FNPT inlet.

The main flow of air exits through the nozzle tip and full plant air pressure is available to move and dislodge debris. In addition, a small portion of the main flow is diverted through slots around the periphery of the nozzle to form a protective air cone. Helpsprevent chips and other debris from "flying back" towards the operator. Should the tip become blocked, the entire air flow is diverted through the slots. Under these conditions pressure at the nozzle tip is held to less than 30 PSI, thereby satisfying OSHA safety standards.

Jet Guard Safety Protective Air Cone Gun

Model 74SKPart No. 1-816G-74SKReg. Net Price $26.65

$2265

®

Call: 1-800-521-1740 Fax: 1-800-322-4292 Web: KBCTools.com

CUTTING TOOLS

4

1/8" Head Diameter, 1/8" Shank Diameter.SA-43 SC-42 SD-42 SG-41 SM-45 SL-42

MiniatureCarbide Bur Set1-1/2" OAL

Double CutPart No.5-100-71033Reg. NetPrice $42.70

$3630

SETS INCLUDE:A selection of more frequently used, fractional size drills and comes packed neatly in a plastic case.

Solid Carbide Hi-Roc Drill Sets

No. of Part No. Reg. Drills Sizes 5-100- Net Price

5 1/8" to 3/8" by 16ths 7 1/16" to 1/4" by 32nds 10 3/64" to 3/16" by 64ths

$178.80156.90182.23

-20181-20367-20526

$143.04125.52145.78

SALE!

6-FluteCountersinks SetsSETS INCLUDE:One piece each of 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", & 1" with a particular point angle in plastic case.

60° 82° 90°

$134.16134.16134.16

Included Part No. Reg. Angle 5-100- Net Price

-79001-79006-79011

$114.04114.04114.04

NOW!

6-FluteChatterlessCountersinks

Series 79

HIGH SPEED STEELFEATURES:• Steam homogenized surface treatment (blackening) to prolong tool life and prevent galling.• Because of the multiple flute design,

chip loads are generally smaller and even at maximum speeds, chatter-free machining is possible.

Buy In Package Quantity: Up to 1/2" 3 Per Pack

Body Shank Part No. Reg. Part No. Reg.

Part No. Reg. Dia. OAL Dia. 5-100- Net Price 5-100- Net Price 5-100- Net Price

1/4" 2" 1/4" 5/16 2 1/4 3/8 2 1/4 1/2 2 3/8 5/8 2-1/4 3/8 3/4 2-3/4 1/2 7/8 2-3/4 1/2 1 2-3/4 1/2

60° 82° 90°

-79071-79096-79121-79146-79171-79196-79221-79246

-79076-79101-79126-79151-79176-79201-79226-79251

-79081-79106-79131-79156-79181-79206-79231-79256

$8.87 10.60 10.97 13.55 19.60 26.83 36.80 41.00

$8.87 10.60 10.97 13.55 19.60 26.83 36.80 41.00

$8.87 10.60 10.97 13.55 19.60 26.83 36.80 41.00

$7.54 9.01 9.32 11.52 16.66 22.81 31.28 34.85

$7.54 9.01 9.32 11.52 16.66 22.81 31.28 34.85

$7.54 9.01 9.32 11.52 16.66 22.81 31.28 34.85

NOW! NOW! NOW!

For Economical,General PurposeCountersinking,Chamfering orDeburring.

Solid Carbide Hi-Roc Drills

FEATURES:• Produces chips without generating excessive heat.• Accurately sized holes are produced without annealing or softening the workpiece.• Reamer type finishes are easily produced.• Both a production drill and a salvage or reclaim tool.

135° POINTFINE GRAIN 6%COBALT C-2 GRADE

Designed to drill hardened steelin the 42-65 Rockwell "C" range.

Series 200

Flute Part No. Reg. Size Dia. Length OAL 5-100- Net Price

Flute Part No. Reg. Size Dia. Length OAL 5-100- Net Price

$16.4914.5514.5514.5514.5517.0617.5518.8521.9323.4225.3827.1328.5129.6535.4238.3540.7542.6744.3049.9551.8053.5255.0260.9072.08

-20004-20067-20100-20130-20163-20199-20229-20253-20283-20313-20340-20376-20403-20427-20451-20472-20499-20520-20541-20562-20583-20604-20622-20643-20664

1/32" .0312" 3/16" 1-1/2" 3/64 .0469 1/4 1-1/2 1/16 .0625 5/16 1-1/2 5/64 .0781 3/8 1-1/2 3/32 .0938 1/2 1-1/2 7/64 .1094 5/8 1-1/2 1/8 .1250 5/8 1-1/2 9/64 .1406 5/8 2 5/32 .1562 5/8 2 11/64 .1719 5/8 2 3/16 .1875 5/8 2 13/64 .2031 3/4 2 7/32 .2187 3/4 2 15/64 .2344 3/4 2 1/4 .2500 3/4 2 17/64 .2656 3/4 2-1/2 9/32 .2812 3/4 2-1/2 19/64 .2969 3/4 2-1/2 5/16 .3125 3/4 2-1/2 21/64 .3281 1 2-1/2 11/32 .3438 1 2-1/2 23/64 .3594 1 2-1/2 3/8 .3750 1 2-1/2 25/64 .3906 1 2-3/4 13/32 .4062 1 2-3/4

27/64" .4219" 1" 2-3/4" 7/16 .4375 1 2-3/4 29/64 .4531 1 3 15/32 .4688 1 3 31/64 .4844 1 3 1/2 .5000 1 3 33/64 .5156 1-1/8 3-1/2 17/32 .5312 1-1/8 3-1/2 35/64 .5469 1-1/8 3-1/2 9/16 .5625 1-1/8 3-1/2 37/64 .5781 1-1/4 3-1/2 19/32 .5938 1-1/4 3-1/2 39/64 .6094 1-1/4 3-1/2 5/8 .6250 1-1/4 3-1/2 41/64 .6406 1-1/2 4 21/32 .6562 1-1/2 4 43/64 .6719 1-1/2 4 11/16 .6875 1-1/2 4 45/64 .7031 1-1/2 4 23/32 .7188 1-1/2 4 47/64 .7344 1-1/2 4 3/4 .7500 1-1/2 4 49/64 .7656 1-1/2 4 25/32 .7812 1-1/2 4

-20682-20697-20712-20727-20733-20739-20745-20748-20754-20760-20766-20772-20775-20781-20787-20793-20799-20802-20808-20814-20820-20826-20829-20832

$81.5585.7088.0589.2593.3193.31

125.70128.01131.48133.79143.01146.50148.79149.95230.70236.44247.98247.98250.29258.35268.75275.66284.87294.09

$14.0212.3712.3712.3712.3714.5014.9216.0218.6419.9121.5723.0624.2325.2030.1132.6034.6436.2737.6642.4644.0345.4946.7751.7761.27

SALE!$69.32

72.8574.8475.8679.3179.31

106.85108.81111.76113.72121.56124.53126.47127.46196.10200.97210.78210.78212.75219.60228.44234.31242.14249.98

SALE!

Supplied in afitted plastic case.

SET INCLUDES: SA-1, SC-1, SD-1, SG-1, and SM-1.

5 Pc. Solid CarbideBurr Set1/4" Head Diameter,1/4" Shank Diameter.

Part No.1-338-001Reg. NetPrice $50.49

$4292

$12.8512.9713.8414.6515.2615.5215.8916.8417.6418.3818.9422.2823.0523.8224.9025.7126.5028.05

Saw Diameter Part No. Inch mm 1-856- ONLY! 3/4" 19 7/8 22 1 25 1-1/8 29 1-1/4 32 1-3/8 35 1-1/2 38 1-5/8 41 1-3/4 44 1-7/8 48 2 51 2-1/8 54 2-1/4 57 2-3/8 60 2-1/2 64 2-5/8 67 2-3/4 70 3 76

-65614-65615-65616-65617-65618-65619-65620-65621-65622-65623-65624-65625-65626-65627-65628-65629-65630-65631

CT034CT078CT100CT118CT114CT138CT112CT158CT134CT178CT200CT218CT214CT238CT212CT258CT234 CT300

StarrettNo.

Ultra-high hardness provides long life whencutting difficult and abrasive materials includingwood, PVC and fiberglass.

Carbide Tipped Hole Saws

High Performance Triple ChipTungsten Carbide Tipped Saws

FEATURES:• A cost effective solution for cutting nail embedded wood, wood and metal combination, reinforced concrete and fiberglass.• Leaves high quality surface finish on entry and exit and provides a smooth cut.• Tungsten carbide tipped teeth for outstanding cutting performance and product durability.• Suitable for use in electric & battery operated tools.• Cutting depth of 1-5/8" (41mm).

Major Credit Cards Accepted: 5Subscribe @ KBCTools.com to Get Exclusive Email Offers.

CUTTING TOOLS

Spiral Pointed Hand Taps

FEATURES:• Excellent production tapping of through holes.• Commonly referred to as "gun" taps.• Flute design forces the

evacuation of chips ahead of the cutting action.

HIGH SPEED STEEL PLUG STYLEGROUND THREAD RIGHT HAND

MACHINESCREW SIZES • 2-FLUTE • LIST NO. 106C GH Part No. Reg. Size Limit 106C- Net Price

$8.466.38 6.64 6.89 6.89

4-40 NC H2 6-32 NC H3 8-32 NC H3 10-24 NC H3 10-32 NF H3

-440-22P-632-23P-832-23P-1024-23P-1032-23P

SALE!$7.61

5.74 5.98 6.20 6.20

FRACTIONAL SIZES • 3-FLUTE • LIST NO. 102C GH Part No. Reg. Size Limit 102C- Net Price

$6.976.97 8.18 8.18 9.51 9.51

18.44 18.44 30.85 30.85 42.60

1/4-20 NC H3 1/4-28 NF H3 5/16-18 NC H3 5/16-24 NF H3 3/8-16 NC H3 3/8-24 NF H3 1/2-13 NC H3 1/2-20 NF H3 5/8-11 NC H3 5/8-18 NF H3 3/4-10 NC H3

-1420-33P-1428-33P-51618-33P-51624-33P-3816-33P-3824-33P-1213-33P-1220-33P-5811-33P-5818-33P-3410-33P

SALE!$6.27

6.27 7.36 7.36 8.56 8.56

16.60 16.60 27.77 27.77 38.34

Metric SpiralPointed Hand Taps

HIGHSPEED STEEL PLUG STYLERIGHT HANDGROUND THREAD

FEATURES:• Commonly referred to as "gun" taps.• Production tapping of through holes.• Flute design forces the evacuation of chips ahead of the cutting action.

LIST NO. 102M

$11.739.687.957.958.499.48

17.4321.69

Pitch Dia. No. of Part No. Reg. Size Limit Flutes 102M- Net Price

M2.5X0.45 D3 2 M3X0.5 D3 2 M4X0.7 D4 2 M5X0.8 D4 2 M6X1 D5 2 M8X1.25 D5 2 M10X1.5 D6 3 M12X1.75 D6 3

-62814-62818-62826-62834-62838-62850-62854-62858

SALE!$10.56

8.717.167.167.648.53

15.6919.52

CENTER CUTTING

4 Flute Solid CarbideSingle End Mills

Designed for slotting, drilling, pocketing, and general purpose milling.

STANDARD LENGTH Flute Flute Part No. Reg. Dia. Shank Length OAL 1-326- Net Price

1/16" 1/8" 3/16" 1-1/2" 1/8 1/8 1/2 1-1/2 3/16 3/16 5/8 2 1/4 1/4 3/4 2-1/2 5/16 5/16 7/8 2-1/2 3/8 3/8 7/8 2-1/2 7/16 7/16 1 2-1/2 1/2 1/2 1 3 9/16 9/16 1-1/4 3-1/2 5/8 5/8 1-1/4 3-1/2 3/4 3/4 1-1/2 4

$5.805.809.28

10.5012.9015.7722.6827.5052.9255.0876.68

$4.934.937.898.93

10.9713.4019.2823.3844.9846.8265.18

-004-008-012-016-020-024-028-032-036-040-048

SALE!

Standard Length TiN Coated Solid Carbide Single End MillsDesigned for general milling operations. Spiral multi-flute design permits a fasterand smoother cutting action.

2 FLUTE

3 FLUTE

$8.808.809.90

12.5016.6020.0030.0033.00

$6.036.309.62

12.1514.7818.9029.1629.70

$7.927.928.91

11.2514.9418.0027.0029.70

-004-008-012-016-020-024-028-032

$6.707.00

10.6913.5016.4221.0032.4033.00

$6.036.309.62

12.1514.7818.9029.1629.70

-004-008-012-016-020-024-028-032

Flute Shank Flute Part No. Reg. Part No. Reg. Part No. Reg. Dia. Dia. Length OAL 1-325C- Net Price 1-330C- Net Price 1-326C- Net Price

2 Flute

1/16" 1/8" 3/16" 1-1/2" 1/8 1/8 1/2 1-1/2 3/16 3/16 5/8 2 1/4 1/4 3/4 2-1/2 5/16 5/16 7/8 2-1/2 3/8 3/8 7/8 2-1/2 7/16 7/16 1 2-1/2 1/2 1/2 1 3

$6.707.00

10.6913.5016.4221.0032.4033.00

-004-008-012-016-020-024-028-032

SALE! SALE! SALE!

3 Flute 4 Flute

MICROSHIELD™ TiN - TITANIUM NITRIDE:A general purpose coating for Solid Carbide, HSS and HSCO end mills that provides effective protection against wear, abrasion and edge buildup. Primary applicationsare milling steels in a non-hardened condition.

2 Flute Double End MillsDesigned for slotting, keying, grooving, and general purpose milling.

$7.357.357.357.507.50

13.1517.80

$5.155.155.155.255.259.21

12.46

Mill Shank Length Part No. Reg Dia. Dia. Of Cut OAL 5-250- Net Price

-005-015-025-035-045-065-075

1/8" 3/8" 3/8" 3-1/8" 3/16 3/8 7/16 3-1/8 1/4 3/8 1/2 3-1/8 5/16 3/8 9/16 3-1/8 3/8 3/8 9/16 3-1/8 1/2 1/2 13/16 3-7/8 5/8 5/8 1-1/8 4-1/2

SALE!

HIGH SPEED STEEL

45o Helix Single End TiCN Solid Carbide Center Cutting End Mills For Aluminum

FEATURES:• Full form ground flute shape.• Eccentric primary relief and cylindrical land.• Extra fine grain carbide.• Ultra high transverse rupture strength.

$20.1022.0027.2039.7037.2041.2064.3044.1049.0080.10

104.0054.7060.7092.9059.8675.1083.5092.90

132.00231.00

$17.0918.7023.1233.7531.6235.0254.6637.4941.6568.0988.4046.5051.6078.9750.8863.8470.9878.97

112.20196.35

Mill Shank Length Part No. Reg. Dia. Dia. of Cut OAL 5-303C- Net Price

-61626-61627-61630-61631-61634-61635-61636-61639-61640-61641-61642-61645-61646-61647-61650-61651-61654-61655-61656-61657

1/8" 1/8" 1/4" 1-1/2" 1/8 1/8 3/8 1-1/2 3/16 3/16 5/16 2 3/16 3/16 9/16 2 1/4 1/4 3/8 2-1/2 1/4 1/4 3/4 2-1/2 1/4 1/4 1-1/4 4 5/16 5/16 7/16 2-1/2 5/16 5/16 13/16 2-1/2 5/16 5/16 1-1/4 4 5/16 5/16 2-1/4 4 3/8 3/8 1/2 2-1/2 3/8 3/8 1 2-1/2 3/8 3/8 1-1/2 4 7/16 7/16 9/16 2-3/4 7/16 7/16 1 2-3/4 1/2 1/2 5/8 3 1/2 1/2 1-1/4 3 1/2 1/2 2 4 1/2 1/2 3-1/8 6

NOW!

3 FLUTE - LIST A345

2 FLUTE - LIST A245

$20.7022.0037.2041.2064.3047.0051.8098.8075.5083.80

132.00

Mill Shank Length Part No. Reg. Dia. Dia. of Cut OAL 5-303C- Net Price

-61442-61443-61450-61451-61452-61461-61462-61463-61470-61471-61472

1/8" 1/8" 1/4" 1-1/2" 1/8 1/8 3/8 1-1/2 1/4 1/4 3/8 2-1/2 1/4 1/4 3/4 2-1/2 1/4 1/4 1-1/4 4 3/8 3/8 1/2 2-1/2 3/8 3/8 1 2-1/2 3/8 3/8 1-1/2 4 1/2 1/2 5/8 3 1/2 1/2 1-1/4 3 1/2 1/2 2 4

NOW!$17.60

18.7031.6235.0254.6639.9544.0383.9864.1871.23

112.20

MICROSHIELD™ TiCN - TITANIUM CARBONITRIDE:Incorporation of Carbon into the TiN matrix to increasehardness and abrasion resistance. TiCN is an alternativeto TiN for HSS and HSCO applications where additional wear resistance is required. Primary Solid Carbideapplications are milling Aluminum Alloys and Cast Iron.

AdvancedGeometrics forHigh Performance Machining of

Aluminum.

Call: 1-800-521-1740 Fax: 1-800-322-4292 Web: KBCTools.com

CUTTING TOOLS

6

$5.906.446.807.708.468.71

10.4410.9812.8512.8515.6615.9719.0419.0420.2721.0623.9825.2528.0631.0033.7336.0741.7246.4250.7454.9759.6564.1966.1768.35

Part No. Reg. Size 5-373- Net Price

3/64" 1/16 5/64 3/32 7/64 1/8 9/64 5/32 11/64 3/16 13/64 7/32 15/64 1/4 17/64 9/32 19/64 5/16 21/64 11/32 23/64 3/8 25/64 13/32 27/64 7/16 29/64 15/32 31/64 1/2

-003-004-005-006-007-008-009-010-011-012-013-014-015-016-017-018-019-020-021-022-023-024-025-026-027-028-029-030-031-032

$5.025.475.786.557.197.408.879.33

10.9210.9213.3113.5716.1816.1817.2317.9020.3821.4623.8526.3528.6730.6635.4639.4643.1346.7250.7054.5656.2458.10

SALE!

Solid carbide construction allows extra rigidityand useful under high drilling temperatures.For use on cast iron, aluminum, plastic, non-ferrous alloys, and highly abrasive materials.

Solid Carbide Jobbers Drills 118°

POINT

RIGHTHAND135° SPLIT POINTHIGH SPEED STEEL

Cobalt Jobbers DrillsFor drilling tough, high tensile strength materials.Heat resistant 8% cobalt andheavy-duty flute construction.

1/16" 1-7/8" 5/64 2 3/32 2-1/4 7/64 2-5/8 1/8 2-3/4 9/64 2-7/8 5/32 3-1/8 11/64 3-1/4 3/16 3-1/2 13/64 3-5/8 7/32 3-3/4 15/64 3-7/8 1/4 4 17/64 4-1/8 9/32 4-1/4 19/64 4-3/8 5/16 4-1/2 21/64 4-5/8 11/32 4-3/4 23/64 4-7/8 3/8 5 25/64 5-1/8 13/32 5-1/4 27/64 5-3/8 7/16 5-1/2 29/64 5-5/8 15/32 5-3/4 31/64 5-7/8 1/2 6

$2.172.172.172.282.752.783.123.293.664.434.875.165.446.236.517.988.459.38

10.2211.8711.6913.4413.9515.4715.8019.0919.4320.0419.69

$1.741.741.741.822.202.222.502.632.933.543.904.134.354.985.216.386.767.508.189.509.35

10.7511.1612.3812.6415.2715.5416.0315.75

-004-005-006-007-008-009-010-011-012-013-014-015-016-017-018-019-020-021-022-023-024-025-026-027-028-029-030-031-032

Part No. Reg. Size OAL 1-011A- Net Price SALE!

1/16" - 1/2" by 64thsPart No.1-001-0290Reg. NetPrice $25.03

$1495

Jobbers length drills aredesigned to perform in a wide variety of normal conditions and in a broad range of materials in both machine and portable drilling.

29 Pc.FractionalJobbers Drill Set

RIGHTHAND118°SPLITPOINTHIGHSPEEDSTEEL

8 Piece Set

9/16" to 1" by 16thsPart No. 1-060A-200Reg. Net Price $315.07

$26781

Carbide Tipped Roto Percussion Masonry Drills

Used for Drilling inConcrete, Brick, Tile,Cinder Block, Plaster, Etc.

1/8" 3" 1/8" 5/32 3 1/8 3/16 3-1/2 3/16 3/16 6 3/16 7/32 4 7/32 1/4 4-1/8 1/4 1/4 6 1/4 9/32 4 1/4 5/16 4-3/4 5/16 3/8 4-1/2 3/8 3/8 6 3/8 7/16 6 3/8 1/2 6 1/2

$2.923.252.753.474.243.033.743.584.184.574.906.777.37

$2.342.602.202.783.392.422.992.863.343.663.925.425.90

Part No. Reg. Size OAL Shank 1-010- Net Price

-001-002-003-004-005-006-007-009-011-014-015-017-019

SALE!

Silver & Deming Drills

1/2" SHANK118° POINT6" OVERALL LENGTHHIGH SPEED STEEL

Expands the size range capacityof a 1/2" portable drill chuck. Ideal for drilling in low & medium tensile strength materials.

$22.2425.0327.7430.6236.8641.1548.3157.8964.5670.8179.1497.04

112.04123.70134.95

-036-040-044-048-056-060-100-104-108-112-116-120-124-128-132

$26.1629.4532.6436.0243.3748.4156.8468.1175.9583.3093.10

114.17131.81145.53158.76

9/16" 5/8 11/16 3/4 7/8 15/1611-1/161-1/81-3/161-1/41-5/161-3/81-7/161-1/2

Part No. Reg. Size 1-060A- Net Price NOW!

TiN CoatedPart No. 5-331-3682Reg. NetPrice $23.80

$1666

3 Pc.TiN CoatedStep Drill SetFEATURES:• Ranges of Bits: 1/8-1/2", 3/16-1/2", 1/4-3/4".• Designed to deburr as you go.• Creates perfectly round holes in metal, plastic, wood, and other thin materials. • Tip does not slide, absolutely no need for a center punch.• Easily sharpened.

HIGH SPEED STEEL

OutsideChamfering MillsFEATURES:• Chatterless design.• Designed to chamfer a variety of diameters on tubing, pipe, and round stock.• Use on drill presses, screw machines, lathes or other chucking machines.

Major Actual Work Mouth Recess Body Body Thread Part No. Reg. Part No. Reg. Dia. Dia. Hole Dia. Length Size 1-162- Net Price 1-162- Net Price

$42.90 55.85

— 65.95

— 91.80 152.70

$45.7559.2068.10—

94.95——

60° 90°

1/4" 5/16" 3/64" 1/2" 1" 5/16"-24 1/2 5/8 1/8 7/8 1-1/4 3/8-24 3/4 7/8 1/4 1-1/8 1-3/4 1/2-20 3/4 7/8 3/16 1-1/8 1-5/16 1/2-20 1 1-1/8 1/4 1-1/2 2 3/4-16 1 1-1/8 1/4 1-3/8 1-3/4 3/4-16 1-1/2 1-5/8 5/8 2-1/2 1-7/8 3/4-16

-601-602-603—

-604——

-901-902

—-903

—-904-905

$38.8950.3257.89—

80.71——

$36.47 47.47

— 56.06

— 78.03 129.80

SALE! SALE!

FEATURES:• Ideal for drilling in low and medium tensile strength materials.• Common flute and overall length for minimal adjustment during tool changes.• Precision ground for a high degree of concentricity between shank & body diameter.

5 Pc. 3/4" Reduced Shank Drill Set

HIGH SPEED STEEL 118° POINT

1" to 1 1/2" by 8thsPart No. 1-059-000Reg. Net Price $194.22

$16509

Supplied in a wood block.

Major Credit Cards Accepted: 7Subscribe @ KBCTools.com to Get Exclusive Email Offers.

CUTTING TOOLS

JOBBERS LENGTH DRILLS 4011 1 to 6mm by 0.5mm 2026 Drill Index A to Z 2060 Drill Index No. 1 to No. 60

326 A to Z 360 No. 1 to No. 60

-4011

-2026-2060

-0326-0360

$8.00

20.0020.00

30.0049.00

Huot Part No. Reg. No. Description 1-030- Net Price

SCREW MACHINE DRILLS

TAPER LENGTH DRILLS

$4.00

10.0010.00

15.0024.50

SALE!

DrillIndexes

FEATURES:• Folding drill holder.• All-steel index securely holds drills by the shank (except taper shank drills).• Greater accessibility.• High quality epoxy finish.• Silk screened drill identification for easy picking of drills.

5 Pc. Combined Drill and Countersink SetWith Plastic Case

60° RIGHT HANDHIGH SPEED STEELNo. 1 through No. 5Part No. 1-031-200Reg. Net Price $34.75

$2954

SAVE MOREBUY THE SET

Combined Drills and CountersinksHIGH SPEED STEEL RIGHT HAND

1 1/8" 3/64" 2 3/16 5/64 3 1/4 7/64 4 5/16 1/8 5 7/16 3/16

$5.435.675.916.099.67

-005-015-025-040-050

Body Drill Part No. Reg. Size Dia. Dia. 1-031- Net Price NOW!

$4.624.825.025.188.22

Plain type combined drills and countersinks are used for producing center holes in components or workpieces which require machining between centers.

Tolerances:Up to 1/2" .....+.0000"/-.0003"Over 1/2" .....+.0000"/-.0005"

Fractional Drill Blanks

Blanks are often used as gages to check hole sizedrill bushing size.Can be used as guidepins for die sets ormodified as punches.

HIGH SPEED STEEL

HARDENED & GROUNDBRIGHT FINISH

Part No. Reg. Part No. Reg. Size 1-096- Net Price Size 1-096- Net Price

19/64" 5/16 21/64 11/32 23/64 3/8 25/64 13/32 27/64 7/16 29/64 15/32 31/64 1/2

$1.361.441.441.441.441.441.581.581.902.372.482.712.923.153.39

-004-005-006-007-008-009-010-011-012-013-014-015-016-017-018

1/16" 5/64 3/32 7/64 1/8 9/64 5/32 11/64 3/16 13/64 7/32 15/64 1/4 17/64 9/32

SALE!$1.16

1.221.221.221.221.221.341.341.622.012.112.302.482.682.88

-019-020-021-022-023-024-025-026-027-028-029-030-031-032

$3.713.924.284.615.165.725.956.527.308.208.338.669.789.78

$3.153.333.643.924.394.865.065.546.216.977.087.368.318.31

SALE!

1/16" to 1/2" by 64thsPart No. 1-099-029Reg. NetPrice $100.30

$8526

29 Pc.FractionalBlank Set

Hex Shank Taper Car Reamers

Taper Car Reamers have the same features as bridge reamers except for shorter flute and overall length facilitating their use in tight quarters. Hex Nut welded to shank for ready use in pneumatic power tools.

SPIRAL FLUTEHIGH SPEEDSTEEL

$59.7065.3074.7590.90

Flute Part No. Reg. Size Length 5-056X- Net Price

11/16" 5" 13/16 5 15/16 5 1-1/16 5

-051-052-060-104

$41.7945.7152.3363.63

SALE!

FEATURES:• Files will not skip or jump out of fine pitches. • Milled, not cold-formed, so cutting teeth actually have sharp edges which allow the file to do the work

rather than the mechanic.• File teeth come to a sharp point

which allows the teeth to get to the bottom of the thread and remove any rust or gunk that has accumulated there.

Thread Restoring Files

11, 12, 13, 14, 16, 18, 20 & 24 TPI 9, 10, 12, 16, 20, 27, 28 & 32 TPI 8, 10, 11-1/2, 14, 16, 18, 24 & 27 8, 10, 11-1/2, 14 .80, 1.0, 1.25, 1.5, 1.75, 2.0, 2.5, 3.0 For files #101,102, #103, & #107

$7.45

7.45

7.45

22.507.45

0.70

Part No. Reg. Description Threads 1-842- Net Price

-101

-102

-103

-104-107

-110

ThreadRestoring

Files

ExternalPipe Files

MetricThread Files

PlasticHandles

SALE!$6.33

6.33

6.33

19.136.33

0.60

Nu-Thred® files are the highest quality with cross-cut &

depth proportional to the thread pitch.HIGH SPEED STEEL

3 FLUTE STRAIGHT SHANK

7 Pc. Solid Cap ScrewCounterbore Set

FEATURES:• Designed to create a recess for socket head cap screws and shoulder screws.• Also used for spot facing smaller spots, enlarging, or cleaning holes.• Solid pilot will not score or damage pilot hole.• Cutting action is chatterless.

SET INCLUDES:Sizes - 6, 8, 10, 1/4", 5/16", 3/8", 1/2"Part No. 1-166-400Reg. Net Price $108.95

$8171Supplied in wood stand.

Used for producing center holes in components or workpieces with the extra length allowing access to difficult-to-reach areas.

Long Series CombinedDrills and Countersinks

60° INCLUDED ANGLEHIGH SPEED STEEL

-130-140-150-160-240-250-260-340-350-360-440-450-460-540-550-560-650-660

1 1/8" 3/64" 3 1 1/8 3/64 4 1 1/8 3/64 5 1 1/8 3/64 6 2 3/16 5/64 4 2 3/16 5/64 5 2 3/16 5/64 6 3 1/4 7/64 4 3 1/4 7/64 5 3 1/4 7/64 6 4 5/16 1/8 4 4 5/16 1/8 5 4 5/16 1/8 6 5 7/16 3/16 4 5 7/16 3/16 5 5 7/16 3/16 6 6 1/2 7/32 5 6 1/2 7/32 6

$13.1313.7019.0324.9215.0219.2425.0215.8220.8125.2517.5222.4025.8623.0326.6729.9428.6534.63

$11.8212.3317.1322.4313.5217.3222.5214.2418.7322.7315.7720.1623.2720.7324.0026.9525.7931.17

Body Drill Part No. Reg. Size Dia. Dia. OAL 1-047A- Net Price NOW!

Call: 1-800-521-1740 Fax: 1-800-322-4292 Web: KBCTools.com

CARBIDE TOOLING

8

FEATURES: • For use with 80O

diamond positive clearance CCMT inserts.• Complete with 4-Layer Coated Carbide Inserts, Torx Screws & Torx Key.

7 Pc. Indexable Toolholder & Boring Bar Sets

NOW!

SCLCR, SCLCL,SCBCR, SCKCR, SCMCN, SCSCR,

& SCLCR

-407101-407102-407103-407104-407105

1/4"5/163/81/25/8

21.51

$247.35254.85267.25285.95385.40

Tool Styles CCMT Included in Set Shank Insert Part No. Reg. (1 each) Size Series 1-428- Net Price

$210.25216.62227.16243.06327.59

Supplied with a fitted wooden case.

FEATURES:• Advanced precision chip clearance allows for maximum boring capacity.• The insert is held more secure with the Torx screw than the hex screws and reduces tool slipping.• Positive rake for fast material removal, as well as finishing.• Bar made of heat treated, precision ground alloy steel for rigidity.

TPBN Positive Insert Indexable Boring Bars

For use withTPGB & TPGH

Style Inserts

Style LEnd and side cuttingangle for positive triangleTPGB or TPGH inserts.

F

EC

Shank

B

0° 5°

5°5° POSRAKE0°

Right Hand Shown Left Hand Opposite

Min. Tool Bore Insert Part No. Reg. Style B C D E F Series 1-512A- Net Price

TPBN06-2TPBN08-2TPBN10-2TPBN12-3TPBN16-3TPBN20-3TPBN20-4TPBN24-4

21.51

322

432

.430" .590 .682 .845 1.115 1.370 1.370 1.680

5" 6 8 10 12 12 12 12

.375" .500 .625 .750 1.000 1.250 1.250 1.500

.208"

.287

.350

.422

.555

.682

.682

.840

1-1/4"1-1/22-1/42-1/233-1/23-1/24

SALE!-001-002-003-004-005-006-007-008

$71.6173.4974.9278.81

134.73153.75153.75169.60

$60.8762.4763.6866.99

114.52130.69130.69144.16

FA

A - A

D

L

Ø dØmin

95°

95°

FEATURES:• Negative 3° side and

end cut edge angle.• Uses 80° diamond positive clearance CCMT inserts.

SI-SCLC R Indexable Boring Bars

Center Shank Min. OAL Line Insert Part No. Reg. Boring Bar Style Size Bore L F Series 6-870- Net Price

SI-SCLCR 4-2SI-SCLCR 6-2SI-SCLCR 8-2SI-SCLCR 10-2SI-SCLCR 8-3SI-SCLCR 10-3SI-SCLCR 12-3SI-SCLCR 16-3

-042-062-082-085-083-103-123-163

.315" .375 .500 .625 .500 .625 .750 1.000

.354" .468 .560 .850 .625 .812 1.000 1.120

4" 6 7 8 7 81012

21.51

32.52

.1875".2500.2900.4050.3120.4060.5000.6094

$54.9354.9354.9373.3655.3064.4769.3188.12

SALE!$46.69

46.6946.6962.3647.0154.8058.9174.90

BantamSystem Kits

Part No. 1-294-072Reg. Net Price $171.01

$14536

B2 Boring Kit

FEATURES:• .285" minimum bore• .007" radius inserts• GP22 grade inserts

INCLUDES:• (1) CSBI-250-3-5R holder• (10) CDCG-505L inserts

Small DiameterCutting System For Boring and Threading.

Part No. 1-294-071Reg. NetPrice $171.01

$14536

FEATURES:• .180" minimum bore• .007" radius inserts• GP22 grade inserts

INCLUDES:• (1) CSBI-165/187-1/2-7R holder• (10) CDCG-505L inserts

B1 Boring Kit

Part No. 1-294-061Reg. Net Price $235.24

$21172

T1Threading Kit

FEATURES:• 60o V threading• .312" minimum bore• GP22 grade inserts

INCLUDES:• (1) BFR-312S holder• (10) BFR3-60V inserts

Part No.1-512A-015

Reg. NetPrice $554.18

$47105

TPBN-BBS1 Boring Bar SetTPBN-S SET INCLUDES:

(1) TPBN06-2 1/2" .430" (1) TPBN08-2 1/2 .590 (10) 21.51 (1) T-8 (1) TPBN10-2 5/8 .682 (1) TPBN12-3 3/4 .845 (10) 321 (1) T-10

Tool Shank Minimum TPGH Torx Number Size Bore Inserts Key

(1)Storage

Box

COMPLETESET INCLUDES:• (4) Boring Bars • (20) Coated Inserts• (2) Torx Keys• (1) Storage Box

SAVE MOREBUY THE SET

10 20 30 40 50 60 70 80

D min

D max

Ø

Ø

L

Dh6

y

80°

10°

Countersink& Chamfering Tool, 10O to 80O

Fleximill End Mills

Fleximill InsertsCOATED C-6 GRADE Part No. Reg. Insert 1-293TC- Net Price

-012 $8.00TCMT 16T3 $6.80SALE!

D. D. Part No. Reg. End Mill No. D h6 L Y min. ø max. ø 1-293- Net Price SALE!340 W 750340 W 1.000

.75" 4" 10O-80O .20" 1.00" 1.00 4 10O-80O .20 1.25

$283.14300.82

$333.10353.90

-151 -152

Major Credit Cards Accepted: 9Subscribe @ KBCTools.com to Get Exclusive Email Offers.

CARBIDE TOOLING

Insert Part No. Style W l r 1-244X- ONLY!

$11.8012.20

SP300 .122" .445" .008" SP400 .161 .445 .010

-SP3-SP4

GRADE NC-3030 - Excellent coated grade for rough cuts in steel & steel alloys. Equivalent to P20-P40 & M20-M40 grade. Recommended Cutting Speed: 250-650 SFM.

Style SP Carbide InsertsI

7o

W=±0.004

W r

I

7o

W=±0.004

W r

Saw-Man Cut-Off Blade KitsFEATURES:• Small width of chip can be achieved due to special chip breaker and cutting edge design.• Extended tool life due to specially designed rake angle.• Built-in stopper prevents inserts from being pushed back which ensures accuracy during high speed applications.• Decreased nose radius size to prevent burrs on work piece.• Various insert lead angles available for best machining conditions.

Fig. 2

150o

H h

W

H

L

SAVE MOREBUY THE KIT

* Insert Grade: Coated NC3030

Part No. Tool Number H W L h 1-244- ONLY! Inserts* Wrench

SPBA100-S-3-NI 1" 3/32" 4-3/8" .827" SPBA125-S-3-NI 1-1/4 3/32 6 .984 SPBA100-S-4-NI 1 1/8 4-3/8 .827 SPBA125-S-4-NI 1-1/4 1/8 6 .984

$110.00110.00121.00121.00

-106-130-107-131

(20) SP300 SW15S (20) SP300 SW15S (20) SP400 SW15S (20) SP400 SW15S

KIT INCLUDES

The Mil-Tec Freedom Cutter®

is perfect for every shop. Thecombination of flexibility andperformance offers users a low costmilling solution without sacrificing quality.

FEATURES:• Positive geometry for free cutting.• Separate geometry for aluminum and steel.

Freedom Cutter®

IndexableShell Mills

Fits three different shapes of inserts. Square, Round, and Octagon, all in one body!

KITS INCLUDE: • Anti-Seize Lubricant• Mil-Tec Freedom Cutter Body• (10) Inserts• (2) Wrenches • Extra Screws

TOOL DIMENSIONS: # of Tool No. Dia. Bore Height Inserts

FC-2-4 2" .75" 1.750" 4 FC-3-5 3 1.25 1.875 5 FC-4-6 4 1.50 1.875 6

KITS FOR STEEL/STAINLESS APPLICATIONS(INCLUDES PS45L-MTC357 INSERTS)

Include Part No. Reg. Kit No. Tool No. 1-265- Net Price

KTFC-2-4PSKTFC-3-5PSKTFC-4-6PS

FC-2-4FC-3-5FC-4-6

-035K-040K-045K

$304.20409.50496.80

$338.00455.00552.00

NOW!

For more informationvisit KBCTools.com

Include Part No. Reg. Kit No. Tool No. 1-265- Net Price

KTFC-2-4SSKTFC-3-5SSKTFC-4-6SS

FC-2-4FC-3-5FC-4-6

-035A-040A-045A

$304.20409.50496.80

$338.00455.00552.00

NOW!

KITS FOR ALUMINUM APPLICATIONS(INCLUDES SS45L-MTC322 INSERTS)

NIKCOLE MINI-SYSTEMS Grooving & Cut-Off Set For Grooving & Cut-Off Under .078" Width

FEATURES:• The only system that provides you with two cutting

edges in one insert in extremely narrow widths.• Positive locking insert screw & unique insert pocket design assures a repeatable cutting edge location.

SET INCLUDES:• (1) Right Hand Toolholder 1/2" SQ x 4-1/2" L. • (5) TiN Coated Standard Grooving Inserts: .035" W x .100" T .043" W x .235" T .051" W x .235" T .063" W x .235" T .073" W x .235" T• (1) Screw & Torx Key.Part No. 1-293-015

Reg. Net Price $164.16 $13954

Supplied with a fitted case.

Insert Blade Max Part No. Reg. Size Size (H) H1 L W A Dia. 6-895- Net Price

-262-263-264-265-323-324-325

GTN-2GTN-3GTN-4GTN-5GTN-3GTN-4GTN-5

.087" .065" 1.97" .122 .091 2.95 .161 .126 3.15 .201 .169 3.15 .122 .091 3.94 .166 .126 3.94 .201 .169 4.70

1.02"

1.26

.83"

.97

4.33"

5.91

$59.6763.4763.4796.4973.7173.7179.50

$70.2074.6774.67

113.5286.7286.7293.53

SALE!

Adjustable Cut-Off Blades

MICRO 100 is a space age, micro grain carbide ofexcellent quality. It is in a class of its own, resultingfrom the exclusive treating process. Micro grain carbide has superior rupture strength for exceptional machining versatility. It is also highly shock resistant, it will notchip or break under normal machining conditions andis unexcelled in interrupted cutting. It considerablyprolongs tool life in machining all hard stainlesssteels, and also efficiently performing in exotic metals.

Style CCMTCarbide Insert

80o DiamondFEATURES:• 1/4" I.C.• Insert Style: CCMT 21.51• Thickness: 3/32"• Hole Diameter: .110"• Corner Radius: 1/64"

Part No. 1-428-501100Reg. Net Price $10.15

$863

Style TNMG CarbideInserts

FEATURES:• Double sided.• Pin and clamp insert.• 0° relief angle.• Use for medium cuts.• Standard chip control.• Depth of Cut: 5/64" ~ 15/64".• Feed Rate: .010" ~ .020"/rev.

Grade TG-320 - Excellent coated grade for general purpose cuts in steel and steel alloys. Equivalent to P10-P30 grade. Recommended cutting speed 500-1,000 SFM.

TRIANGULAR

ASA Insert Hole Corner Part No. Reg. Code IC Size Dia. Thickness Radius 1-2443- Net Price

TNMG-321 3/8" .150" 1/8" 1/64" TNMG-322 3/8 .150 1/8 1/32 TNMG-323 3/8 .150 1/8 3/64 TNMG-324 3/8 .150 1/8 1/16 TNMG-331 3/8 .150 3/16 1/64 TNMG-332 3/8 .150 3/16 1/32 TNMG-431 1/2 .203 3/16 1/64 TNMG-432 1/2 .203 3/16 1/32 TNMG-433 1/2 .203 3/16 3/64

-622-623-624-625-626-627-628-629-630

$7.557.557.557.558.208.20

11.6511.6511.65

SALE!$6.04

6.046.046.046.566.569.329.329.32

Call: 1-800-521-1740 Fax: 1-800-322-4292 Web: KBCTools.com

WORK HOLDING

10

FEATURES:• Universal Use - TCI soft jaws fit all Anglock, Accu-Lock, Lock-Tight and similar precision machine vises.• Protect Finish - Aluminum soft jaws will not damage finish of parts.

Aluminum Soft Jaws For Precision Machine Vises

Part No. 1-554-161006Reg. Net Price $46.72

$4205

SPECIFICATIONS: Vise Size .......................... 6"Jaw Dimensions: Thickness ............... 1.230" Height ..................... 2.000" Length ..................... 7.000"

For Kitagawa, Matsumoto and Howa & Seike chucks. All Jaws are made from 1018 Mild Steel.

Metric Serrated Square and Pointed Soft Jaws

P=Pointed Jaw

Chuck H&R Part No. Reg. Net Size Reference # A B C D J F Bolt 7-905M- Price Ea.

6" Kitagawa HR-6K-1.5-P 3-1/8" 1-1/2" 1-1/4" .472" .438" .787" 10mm HR-6K-2.0-P 3-1/8 2 1-1/4 .472 .438 .787 10mm 8" Kitagawa HR-149-1.5 3-1/2 1-1/2 1-1/2 .551 .781 1.000 1/2 B-208 Kitagawa HR-149-2.5 3-1/2 2-1/2 1-1/2 .551 .781 1.000 1/2 B-10 Kitagawa HR-82-2.0 4 2 1-1/2 .630 .650 1.181 1/2 B-210 Kitagawa HR-82-2.5 4 2-1/2 1-3/4 .630 .650 1.181 1/2

-005-006-007-008-010-011

$23.3826.2222.8823.8621.9329.99

$21.0423.6020.5921.4719.7426.99

SALE!

1.5MM (.0591) @ 60˚ SERRATION

Soft Top JawsAmerican StandardTongue & Groove (A.S.T.G.)

For Bergman, Bison, Cushman, Huron, Rohm, Forkhardt,Pratt Burnerd America, SCA, SP, W&S, Nobel and Yuasa chucks. All Jaws are made from 1018 Mild Steel.

MEDIUM DUTY1/8" TONGUE HEIGHT

P=Pointed Jaw

Chuck H&R Part No. Reg. Net Size Reference # A B C D E F Bolt J 7-905- Price Ea.

6" HR-459-P 3-3/16" 1-5/8" 1-1/4" 5/16" 1/2" 1.50" 3/8" 1-11/16" 8 HR-450 3-1/2 1-5/8 1-1/4 5/16 1/2 1.75 3/8 1-5/8 8 HR-462-P 3-15/16 1-5/8 1-1/4 5/16 1/2 1.75 3/8 2-1/4 10 HR-452 4-1/4 1-7/8 1-1/2 1/2 3/4 2.12 1/2 1-15/16 10 HR-464-P 4-13/16 1-7/8 1-1/2 1/2 3/4 2.12 1/2 2-11/16 12 HR-454 4-7/8 2-3/8 1-3/4 1/2 3/4 2.50 1/2 2-5/16

-002-003-004-005-006-007

$22.5517.5324.6422.5529.2325.05

STANDARD HEIGHT

SALE!$20.30

15.7822.1820.3026.3122.55

1. Workstop assembly, suitable to use with 2"-6" jawplates. Part No. 1-5721-WSRL46 Reg. Net Price $19.76

$1778

2. Extended length workstop assembly, suitable to use with 4" & 6" jaw on outside. Part No. 1-5721-WSRLE46 Reg. Net Price $26.00

$2340

3. 6" groove-lock jaw plate (not reversible). Part No. 1-5721-D60-315 Reg. Net Price $42.64

$3838

5. Replacement clamp assembly. Part No. 1-5721-WSRL4686S Reg. Net Price $13.52

$1217

GrooveLockTM WorkstopJaw Plates

FEATURES:• Does not interfere with part or spindle.• Single bolt design for tightening workstop.• Simple, functional, integral workstop system.• Multiple parts can be located on the same jaw plate.

WSRL46 WSRLE46

Vise Jaw StopThe Vise Jaw Stop by Edge Technologyis the most advanced jaw stop to date.It features a micro stop rod that ispositioned below the top surface of thevise jaws for cutter clearance. The stoprod is also adjustable side-to-side to allow space between the unit and the workpiece for even more cutter clearance.

FEATURES:• The stop pin is positioned completely below the top surface of vise jaw to allow for cutter clearance.• Body made from anodized aluminum.• Fits all milling machine vises with 1/2" - 7/8" thick jaws and 1/8" minimum protrusion.• 1-1/8" wide body with 2 hardened steel guide pins and large #10 clamp screw are used to secure the unit to the vise jaw.• 8-32 non-marring flat point set screws are used to secure stop rod.• 1/8" x 2" hardened stop pin is used to accurately locate workpieces. The stop pin is also adjustable side-to-side to allow for cutter clearance.

Part No. 1-811-14000Reg. Net Price $24.99

$2124

Fly Cutter & Tool Bits

Counter BalancedUses Standard Tool Bits

SPECIFICATIONS:Shank Size ................... R-8Body Diameter .......... 2-1/2"Tool Bit Size ................ 5/16"

Part No. 1-512-800Reg. Net Price $32.50

$2600

FLY CUTTER

M2 High Speed Steel

5/16" x 2-1/2"Part No.1-420-020Reg. NetPrice $1.70

$136

SQUARE TOOL BIT

Angle PlatesFEATURES:• Hardened to RC 58-62.• Ground flat, square & parallel within 0.0002".• Solid 1-piece steel construction for longer life.

$115.25138.60180.20

Weight Part No. Reg. Dimensions (lbs. - oz.) 1-814- Net Price

3" x 3" x 4" x 1" 4.8 4 x 4 x 4 x 1 7.8 4 x 4 x 6 x 1-1/4 10

-105-106-108

$97.96117.81153.17

NOW!

Major Credit Cards Accepted: 11Subscribe @ KBCTools.com to Get Exclusive Email Offers.

WORK HOLDING

FEATURES:• Stationary jaw has machined keyway for alignment of the vise and includes alignment rail for quick setups.• Hardened vise bed and jaw plates.• Outside rail edges of the body are machined.• More robust main screw that can handle higher torque loads and transmit higher clamping pressure.• Footprint and distance from keyway to stationary jaw same as major competitor.• Sealed bearing systemreduces clamping pressure and increases bearing life.

REPEATABILITY 0.001"

Single StationMachineVises

Part No. 1-903-PWS6900Reg. Net Price $519.00

$44115

SPECIFICATIONS:Max. Jaw Opening ........................................ 9"Jaw Width ................................................ 5.94"Jaw Depth ............................................... 1.75"Vise Length ........................................ 17.206"Vise Width ............................................... 8.77"Weight ................................................. 81 Lbs.

6" VISE FEATURES:• The largest opening in its class of 9".• The angled slide & locking jaw design prevents lifting of the moveable jaw.• Up to 8,200 lbs. of clamping force.• Bed height matched to size 2-7/8" (73.025mm) +/- 0.0005".

Part No. 1-903-PWS8110Reg. Net Price $1,262.00

$1,13580

SPECIFICATIONS:Max. Jaw Opening .......................................... 11"Jaw Width ......................................................... 8"Jaw Depth ..................................................... 2.2"Vise Length ............................................... 21.81"Vise Width ................................................... 11.5"Weight ................................................... 175 Lbs.

8" VISE FEATURES:• The largest opening in its class of 11".• An angled slide and locking jaw are designed to prevent lifting of the moveable jaw.• The 4 bolt design on the stationary jaw reduces deflection by 25%.• Up to 12,000 lbs. of clamping force.• Bed height matched to size 3.310" (84.07mm) +/- 0.0005".

LIFETIMEWARRANTY

Multi-JawRotatingBench Vise

Part No.1-549-29503Reg. NetPrice $331.00

$28135

FEATURES:• Eight locking pin stops hold the rotating head in a desired position during set-up.• The head and base rotate a full 360O.

SPECIFICATIONS: Jaw Width .................................... 5-1/8"Jaw Depth .................................... 3-1/2"Jaw Opening: Top Jaw ........................................... 4" V-Jaw ......................................... 5-1/4" Pipe Jaw .......................................... 3"Pipe Capacity .............................. 2-1/2"Height ......................................... 10-5/8" Weight ........................................ 56 lbs.

INCLUDES:• A built-in anvil and bolt lugs in the base for secure mounting.• (3) Sets of replaceable, hardened steel jaws for holding flat or round stock.

Mini Horizontal/Vertical Rotary Tables

FEATURES:• Table clamping surface are precision ground & cylindrical center bore concentric.• Dual position tables used for circular cutting, angle setting, boring & spot facing operations.• Horizontal and vertical rotary tables come with 360° graduations.• Features dual positive action locks with extra deep coolant channel.• Complete with a pair of mounting clamps.

$157.50225.00

Center Worm Weight Part No. Reg. Diameter Hole Ratio (lbs.) 1-397- Net Price

3" 1 MT 1:60 8.9 4 2 MT 1:72 14.5

-5566-5561

$126.00180.00

NOW!

Indexing Plate Not Included.

REARVIEW

SPECIFICATIONS:V-Block Capacity ..................... 1-5/8"Collet Capacity ........................ All 5CThrough Hole ........................... 1-1/4"Center Height ............................... 3"Height ...................................... 5-1/2"Base (L x W) .......................... 4" x 5"Weight .................................... 22 lbs.

SUBURBAN TOOLMaster-Grind™

Model MG5-CV-S1Part No. 1-806-MG5CVS1Reg. Net Price $2,831.00

$2,40635

FEATURES:• "TWIN-DEX", which combines 5C collet and V-Block in one fixture.• 72 position index plate allows hard index every 5o ±15 arc seconds.• Maximum spindle runout 0.000050".• Square and parallel within 0.0002".• Built-in 2-1/2" sine bar for setting angles between hard index locations.• Horizontal or vertical v-block mounting.• Spindle runs in 2 heavy-duty, 4" tapered roller bearings.

Suppliedwith a fittedwooden case.

SineSet ®

COMPATIBLE!

Heavy Duty PrecisionLive Centers

FEATURES:• A heavy-duty ball thrust bearing takes all axial thrust.• The rotating spindle is extended right through the tapered shank.• 2 specially designed adjustable needle-roller bearings carry all radial loads.• Complete protection of bearings from the ingress of coolant, dirt and dust is provided by the built-in oil-seal, which also prevents loss of lubricant.

ØD

l

L

Mk

Ød

60O

MADE IN CZECH REPUBLIC

Most Popular Live Centers in the USA!

Max. Net Max. Weight Weight Morse Speed Workpiece of Center Part No. Reg. Taper D d L I (RPM) (lbs.) (lbs.) 1-506- Net Price SALE!

$133.30166.62211.22292.59507.08

$156.82196.02248.49344.22596.57

2 1.42" .87" 4.92" 1.00" 6,000 600 .75 3 1.85 1.18 6.38 1.26 5,000 900 1.75 4 2.17 1.38 7.64 1.48 4,000 1,800 3.00 5 2.76 1.77 9.45 1.85 3,500 3,000 6.66 6 3.54 2.36 12.51 2.44 2,500 7,500 15.80

-200-300-400-500-600

FEATURES:• Knockout ends are hardened on carbide tipped dead centers.• Eliminates the need for special dead centers.• Covers the widest range of center hole sizes.

Large Carbide PointImperial Carbide Centers

$184.00214.00298.00408.00

-69102-69103-69104-69105

2 15/16" 1-3/16" 2-3/8" 3 15/16 1-3/16 2-3/8 4 1-1/4 1-3/4 2-11/16 5 1-1/4 1-3/4 3-5/16

Morse Part No. Reg. Taper T A K 1-435- Net Price

$156.40181.90253.30346.80

SALE!

AT

K

Call: 1-800-521-1740 Fax: 1-800-322-4292 Web: KBCTools.com

WORK HOLDING

12

Heavy-Duty Key-TypePrecision ChucksFEATURES:• Heavy-duty performance.• Plain bearing models precision crafted.• All parts are hardened for maximum tool life.

* Extra Heavy-Duty Model

$52.5469.5069.5090.00

139.32131.18208.20

82 32 0 - 3/8" 2JT K2 43 34 0 - 1/2 6JT K3 43 34 0 - 1/2 33JT K3 84 3A 1/32 - 5/8 3JT K3 85* — 1/16 - 3/4 4JT K4 45 36 3/16 - 3/4 3JT K3 85B — 3/16 - 1-1/32 4JT K4

Chuck Jacobs Tapered Jacobs Part No. Reg. Model Equiv. Capacity Mount Key 1-507- Net Price

-501-502-519-503-507-504-505

$44.6659.0859.0876.50

118.42111.50176.97

SALE!

These modern Bison precision lathe chucks canbe used on all types of lathes and different kindsof milling, drilling, and CNC attachments.

FEATURES:• Body made of quality cast iron.• All guideways and bearing surfaces are precisely machined. • Scroll Plate drop forged of fine alloy steel, carefully case hardened.• Thread flanks ground on both sides.• Jaw teeth and guides are hardened and fully ground on both sides. • Pinions hardened and ground.

3-Jaw Self-CenteringScroll Chucks

SEMI-STEEL BODY

Plain Back with 2-Piece Reversible Jaws

$654.55926.25

Thru-Hole Weight Part No. Reg. Size Diameter (lbs.) 7-800- Net Price

8"10

2.1654" 2.9922

34 57

-080-100

$556.37787.31

SALE!Part No7-862-0501Reg. NetPrice $514.90

$43767

INCLUDES (1 Ea.):• Allen Key• Chuck Wrench• Set of Mounting Bolts

SPECIFICATIONS:Chuck Diameter ......................................... 5"5C Collet Holding Capacity ... 3/64" to 1-1/8"Max. Speed ................................ 6,000 RPMApprox. Weight ............................. 12-15 lbs.

Designed for use with all 5C collets. They can be used for turning, facing, boring, grinding and milling operations on center lathes and grinding machines. The simple key operatedscroll provides uniform,distortion free clampingof workpieces and lowcollet exchange times.

5C Collet ChuckPlain Back

R8 Shank Drill Chuck Arbors

PRECISION GROUND

JACOBS TAPER

Chuck Part No. Reg. Taper Taper 1-507- Net Price

$17.2517.2517.2517.2517.25

R8 2JT R8 3JT R8 4JT R8 6JT R8 33JT

-080-135-185-255-305

SALE!$14.66

14.6614.6614.6614.66

Part No. 8-604-002Reg. Net Price $77.30

$6184

Demagnetize dies, punches, cutters orany tools that havebecome magnetized fromany source. Operates on115V AC with on/off switch.

Demagnetizer

Table Size: 6-3/4" x 4-1/2"

Key No. LFA Series Jacobs Series

R1/K1 81B, 81A 1A, 1B, 1BS, MC TB1/KG1 412, 420, 4200 DC, H1, MC, U R4/K7 7A, 7BA, 7B RB13/KK 4222, 4220 DC, H, MC, U

MODEL CD2 INCLUDES:

Model CD1Part No.1-507-201MReg. NetPrice 25.65

$2180

Model CD2Part No.1-507-202MReg. NetPrice $24.25

$2061

Key CAD-DEwith Magnet

Key No. LFA Series Jacobs Series

R6/K3 43, 44, 45, 84, 3, 3A, 6A, 6B, 14N, 83S, 84S, 44Z 34, 35, 56, 5, 6334, 75 R5/K32 82, 42BA, 42BAZ 11N, 32, 33, 3326 MC10, MC33, MC3326 R2/K2 82 2A, MC5 R13/K30 81B, 42, 81BS 30, 31B, 8-1/2N, MC4

MODEL CD1 INCLUDES:

Part No. 8-591A-1ACReg. Net Price $607.66

$51651

FEATURES:• Knurled collet holder is hardened and precision ground.• Uses standard 5C type collets up to 1-1/16" diameter to hold round, hexagonal, and square workpieces.• Can be used with step collets and expanding chucks for internal gripping. • Has 1-7/64" holes completely through unit for bar feeds or dropping finished parts.• Maximum operating pressure is 120 PSI.• Base of fixture is relieved for chip removal.• Double action piston type air cylinder develops holding power 18X air line pressure.

INCLUDES:• Air hose.• 4-way foot treadle.• (2) Lugs for mounting.

heinrich

Overall Height ......................................... 5"Overall Width .................................... 8-1/4"Hold Collets Diameter .................... 1-1/16"Weight ............................................. 25 lbs.

Air Collet Fixture

PRECISION GROUND

Morse Taper ShankDrill Chuck Arbors

JACOBSTAPER

Jacobs Part No. Reg. Arbor Taper 1-507- Net Price 2 MT 2JT 2 MT 3JT 2 MT 6JT 2 MT 33JT 3 MT 2JT 3 MT 3JT 3 MT 4JT 3 MT 6JT 3 MT 33JT 4 MT 4JT

SALE!$3.57

3.573.573.574.634.638.424.935.02

11.09

$4.204.204.204.205.455.459.905.805.90

13.05

-060-115-235-290-065-120-170-240-295-175

FEATURES:• Multiple usage on tool holder tapers NMTB/NST, ISO, CAT, BT and DIN.• Enables strong gripping power of cutting tools in horizontal and vertical positions.• Light weight and compact design for mounting on work table or tool cart.

CNC Tool Tightening Fixtures

Weight Part No. Reg Taper (lbs.) 7-189- Net Price

CAT/BT 40CAT/BT 50

4.28.4

-740-750

$158.84176.71

$135.01150.20

NOW!

Horizontal/Vertical

For Turning,Facing, Boring, Grinding & Milling Operations.

Major Credit Cards Accepted: 13Subscribe @ KBCTools.com to Get Exclusive Email Offers.

WORK HOLDING

EXPANDED LISTING!

NMTB Shank ERCollet Chucks

FEATURES:• Collet changes minimized due to large holding range of each collet.• Concentricity guaranteed to 0.0004".• Exclusive self-releasing system reduces sticking.

40 TAPER

Gage Collet Length Dia. Part No. Reg. Size (A) (D) 7-171- Net Price

$122.57121.91114.89143.01

-4016-4025-3040-4040

ER16 2-1/2" 1.26" ER25 2-1/2 1.65 ER32 3 1.97 ER40 2-1/2 2.48

$104.18103.62

97.66121.56

SALE!

Straight Shank ERCollet Chucks

FEATURES:• Concentricity guaranteed to 0.0004".• Collet changes minimized due to large holding range of each collet.• Exclusive self- releasing system reduces sticking.

Collet Shank Shank Part No. Reg. Size Size Dia. OAL 7-171- Net Price

-1105-1106-1606-1607-2007-2009-2503-2505-3001-4001-4002

$118.4892.0490.6090.60

100.97102.69134.06134.06127.42117.35114.52

ER11 1/2" .63" 6.2" ER11 5/8 .63 6.2 ER16 5/8 .875 6 ER16 3/4 .875 6-1/2 ER20 3/4 1.338 5-1/2 ER20 1 1.338 5-1/2 ER25 3/4 1.65 6-1/2 ER25 1 1.65 6-1/2 ER32 1 1.97 3-3/4 ER40 1 2.48 4-1/2 ER40 1-1/4 2.48 4-3/4

$100.7178.2377.0177.0185.8287.29

113.95113.95108.31

99.7597.34

SALE!

ER ColletsFEATURES:• Concentricity guaranteed to 0.0004".• Wide holding range of each collet requires fewer collets and changes.• ER collets collapse approximately 1/32" while maintaining full accuracy.• Unique self-releasing system eliminates sticking.• ER mini-collet chucks allow for machining in tight locations with reduced outside nose diameter.

ER16 COLLETS Part No. Reg. Size 7-171- Net Price

$15.91 15.91 15.9115.91 15.91 15.91

-161-163-164-166-167-169

1/16"1/83/16 1/45/16 3/8

$13.52 13.52 13.5213.52 13.52 13.52

SALE!

ER25 COLLETS Part No. Reg. Size 7-171- Net Price

$17.2217.22 17.22 17.2217.2217.22 17.2217.22

-230-232-234-238-242-246-250-254

1/16" 1/8 3/16 1/4 5/16 3/8 7/16 1/2

$14.6414.64 14.64 14.6414.6414.64 14.6414.64

SALE!

ER40 COLLETS Part No. Reg. Size 7-171- Net Price

$24.24 24.24

24.2424.2424.2424.2424.24

-438-446-454-462-470-478-486

1/4" 3/8 1/2 5/8 3/4 7/81

$20.60 20.60 20.6020.6020.6020.6020.60

SALE!

Part No. Reg. Size 7-171- Net Price

$20.85 20.8520.85 20.85

-112-116-118-122

1/16"1/83/161/4

$17.72 17.7217.72 17.72

SALE!

ER11 COLLETS

Part No. Reg. Size 7-171- Net Price

$16.8916.89 16.89 16.8916.89 16.89 16.8916.89

-201-205-207-211-213-217-221-223

1/16" 1/8 3/16 1/45/16 3/87/16 1/2

$14.3614.36 14.36 14.3614.36 14.36 14.3614.36

ER20 COLLETS

SALE!

ER32 COLLETS Part No. Reg. Size 7-171- Net Price

$20.17 20.17 20.17 20.1720.17 20.1720.1720.1720.17

-330-334-338-340-346-350-354-362-370

1/8" 3/16 1/4 5/16 3/8 7/16 1/2 5/8 3/4

$17.14 17.14 17.14 17.1417.14 17.1417.1417.1417.14

SALE!

Interchangeable with Bilz System.

dD

LFEATURES:• Quick-Change style.• Taper ground to AT3 accuracy or better.

CAT40 V-Flange Rigid TapHolder

$164.73

Adapter Adapt. Proj. Dia. Part No. Reg. Size (d) (L) (D) 7-520- Net Price

$193.80-2148040 #1 .748" 2.32" 1.31"NOW!

CAT40 V-Flange End Mill Holders

$67.1967.1967.1967.1967.1970.0867.1987.4267.1975.1467.1975.1475.1494.65

Part No. Reg. Bore Proj. Dia. 7-520- Net Price

-22907-22909-22911-22915-22917175-22917212-22917-22918-22919175-22921175-229213-22925175-22925-22929

$79.0579.0579.0579.0579.0582.4579.05

102.8579.0588.4079.0588.4088.40

111.35

1/8" 2.37" .69" 3/16 2-1/2 .69 1/4 3 .78 3/8 3 1 1/2 1-3/4 1-1/2 1/2 2-1/2 1-1/4 1/2 3 1-1/4 1/2 4.63 1-3/4 5/8 1-3/4 1-1/2 3/4 1-3/4 1-3/4 3/4 3 1-3/4 1 1-3/4 2 1 4 2 1-1/2 4-1/2 2-1/2

NOW!

FEATURES:• High precision bore (H5) is best in industry.• Taper ground to AT3 for maximum spindle contact.• Individually inspected, tested & certified for accuracy.• Balanced to 15,000 RPM at G6.3.

5C Inch & Metric Collet Sets

FEATURES:• Hardened and precision ground.• Made of high grade steel.• Internal thread 1.041" - 24, external thread 1.242" - 20.

18 Pc. Inch Set1/16" to 1-1/8" by 16thsPart No. 1-519-030Reg. Net Price $120.00

$9600

9 Pc. Metric Set4mm to 20mm by 2mmPart No. 1-519-070Reg. Net Price $55.90

$4472

FEATURES:• Quick-change style.• Change worn taps in seconds.

ANSIRigid TapCollets

$31.4531.4531.4531.4531.4531.4531.4531.4531.4531.45

Part No. Reg. ANSI Metric 7-520- Net Price

Tap Size

$37.0037.0037.0037.0037.0037.0037.0037.0037.0037.00

-19114036-19114041-19114048-19114054-19114063-19114079-19114095-19114111-19114127-19114142

#0 - #6 M1.6 - M3.5 #8,5/32" M4 #10,3/16" M4.5 - M5 #12,7/32" — 1/4" M6, M6.3 5/16" M7, M8 3/8" M10 7/16" M11 1/2" M12, M12.5 9/16" M14

NOW!

SIZE 1

Call: 1-800-521-1740 Fax: 1-800-322-4292 Web: KBCTools.com

ABRASIVES

14

Glass Bead -Used for honing,polishing, peening, blending, finishing and removing light burrs, frosting glass and cleaning most light foreign matter.

Abrasive Media

ABRASIVES (50 LB. CARTONS) Part No. Description Grit 2-011-

$55.1361.2060.64

-5002-5009-5010

Medium Glass BeadCoarse Glass BeadFine Glass Bead

60-100 40-60

100-170

ONLY!

Set CThe Scraper Deburring Tool Set

THE FINISHING TOUCH...

Complete with Mango II. Model C blade holder (w/key) & C42 scraper.

Mango IIPart No. 1-457-256Reg. Net Price $17.66

$1501

Full DiscType Buffs

SPIRALSEWN

FEATURES:• Spiral-sewn for added stiffness. • Approximately 1/4" thick (20 ply).• Mount together to obtain desired overall width.

Part No. Reg. Size Hole 1-442- Net Price

$2.905.057.35

11.55

4" 1/2"- 5/8" 6 1/2 - 5/8 8 1/2 - 5/8 10 7/8 - 1

-384-386-388-3810

NOW!$2.61

4.556.62

10.40

SAINT-GOBAIN

India Triangular Abrasive Files

India files are a smooth cutting aluminum oxide abrasive. Ideal when a close tolerance is more important than the speed of cut.

Triangular files are used for a varietyof deburring, chamfering and radiusingapplications including cleaning tap threads, stoning cutting surface of milling cutters,lapping honing tools, dies and molds, andputting precision points on center punches.

Part No. Reg. Size Grit 1-632- Net Price

4"x 1/4" Medium 4 x 1/4 Fine 4 x 3/8 Medium 4 x 3/8 Fine 4 x 1/2 Medium 4 x 1/2 Fine

-86235-86230-86250-86245-86265-86260

$10.1010.1010.9510.9511.1011.10

$9.099.099.869.869.999.99

SALE!

ALUMINUM OXIDE

1/4" Stem 1/2" Thick

Shank MountedBuffing Wheels

Part No. Reg. Size 1-442- Net Price

$6.407.45

2" 3

-SM2-SM3

$5.766.71

NOW!

TYPE "SM"

FEATURES:• Double sided blade holder to utilize both light-duty "N" series and heavy-duty "S" series blades.• Telescopes from 3/4" to 3-1/4" with N blades.• Telescopes from 3/4" to 2-7/8" with S blades.

Model LB1000Part No.1-457-505Reg. NetPrice $10.45

$888

Liza Burr

INCLUDES:• UNI-Handle.• SN-Holder.• N1 & N2 blades.

FEATURES:• Double end scraper for longer tool life.• Can be locked in required position.

Model SC1000Part No.1-457-508Reg. NetPrice $16.10

$1369

Scraper

INCLUDES:• UNI-Handle.• Double-Ended T120

Triangular Scraper.

Constructed with a universal aluminum oxide grain anda flexible cloth backing. Ideal for use in many hand sanding applicationssuch as deburring,blending andsurfacepreparation.

1" ROLLS - 50 YARD LENGTHS HEAVY-DUTY - FINEST QUALITYALUMINUM OXIDE Quality Coated Abrasives

FEATURES:• The flexible backing can withstand heavy use without tearing.• A resin over resin bond provides strong heat and moisture resistance.• Aluminum oxide is a tough, durable grain characterized by the long life of its cutting edges.

$17.6216.4515.4815.4815.4815.4815.4815.4815.4815.48

Part No. Reg. Grit 1-625- Net Price

-060-080-100-120-150-180-220-240-320-400

60 80100120150180220240320400

$14.9813.9813.1613.1613.1613.1613.1613.1613.1613.16

SALE!

Abrasive Rolls

Part No. 4-130-999Reg. Net Price $7.50

$595

5-1/2" Medium Cut NeedleFile Set

• Flat• Joint• Knife• Round• Slitting• Square• Barrette• Marking• Crossing• Equaling• Half Round• Three Square

INCLUDES (1 EA.):

Supplied in a wallet.

Major Credit Cards Accepted: 15Subscribe @ KBCTools.com to Get Exclusive Email Offers.

ABRASIVES

Quickie Cut™ ReinforcedCut-Off Wheels

TYPE 1

FEATURES:• Grade - ZA60-TB-Flex.• Zirconia aluminum oxide mixture.• Recommended for ferrous metals.• Flexible wheels design for fast cutting & easy work penetration.

B-Flex

Max. Part No. ONLY! Size RPM 1-602- Price/Each

4" x .040"x 5/8" 19,000 4-1/2 x .035 x 7/8 13,300 5 x .040 x 7/8 12,250 6 x .040 x 7/8 10,200 7 x 1/16 x 7/8 8,500

$1.441.401.651.802.87

-45014-45010-45011-45012-45013

FEATURES:• Grade - ZA36-T-Rigid.• Zirconia aluminum oxide mixture.• Recommended for ferrous metals.• Rigid wheel design for fast cutting & longer life.

Rigid

4-1/2" x .045"x 7/8" 13,300 5 x .045 x 7/8 12,250 6 x .045 x 7/8 10,200 7 x 1/16 x 7/8 8,500

Max. Part No. ONLY! Size RPM 1-602- Price/Each

$1.401.701.802.80

-35514-35516-35517-35518

Part No.1-613-34309Reg. NetPrice $24.77

$2105

SHUR-KUT® Disc Kit

KIT INCLUDES:• (5) 2" Discs ea. in aluminum oxide 36, 60, 80, and 120 grit. • (1) Medium density holder with 1/4" shank.

TYPE "S"

Kit contains 20 of themost popular Shur-Kut®quick-change discs.

SHUR-KUT®

Plate Sanders Stik-OnDiscs

Part No. Reg. Net Size Grit 1-613- Price / Ea.

$5.024.184.184.18

14.2812.0212.0212.02

-11504-11507-11508-11510-11552-11555-11556-11558

366080

120366080

120

12"25/box

20"10/box

$4.273.553.553.55

12.1410.2210.2210.82

NOW!

FEATURES:• Heavy-duty "X" wt. cloth, coated with a smooth hot melt pressure sensitive adhesive. • Discs will not slip or fly off and are easily removed without leaving residue on the backing plates.

For GeneralGrinding,Deburring,and Blending. ALUMINUM OXIDE

Green Silicon Carbide Bench Grinding WheelsCool Cutting Vitrified Bondguaranteedfully

6 x 3/4 x H 6 x 1 x H 8 x 1 x H4

-028 -052 -030 -054 -036 -060

$15.3516.9525.40

Part No. 1-703- Max. 60-I 80-I 100-I Reg. Size RPM Grit Grit Grit Net Price

-004-006-012

4,4564,4563,600

$13.0514.4121.59

SALE!

SHUR-BRITE® Stainless Finishing Hand PadsFEATURES:• Great to reorient scratch patterns.• Designed to impart grain finish on stainless steel.• Cleans discoloration from stainless steel.• Removes residue.• Blend tool marks.

Part No.1-613-40754

$206 6" x 9"BLACK

ONLY!

FEATURES:• .24 GRIT• Silicon carbide.• Dressing and opening

vitrified bonded wheels.

1" x 1" x 6"Part No. 1-578-006Reg. Net Price $6.50

$585

Wheel Dressing Stick

Knot Wire Cup Brushes

FEATURES:• Carbon material.• High quality tempered wire.• Thread Arbor Hole - 5/8"-11.• For scale removal, deburring, weld cleaning and flat surfaces.• Quality performance and competitively priced wire wheel brushes.

2-3/4" .014 12,500 2-3/4" .020 12,500 4" .020 8,500

Cup Wire Max. Part No. Reg Net Size Size RPM 1-619- Price / Ea.

$7.157.30

12.05

-49645-49646-49647

$6.086.21

10.24

SALE!

BriteRite®

GeneralPurposeHand Pads

Box Case Part No. Qty. Qty. 1-631- Each Ea./Box Ea./Case

$.75$.96$1.07-827505 20 60

ONLY!

Best for hand application of deburring, polishing, cleaning, finishing &surface preparationon metal compositeor plastic surfaces.

6" x 9"MAROONALUMINUMOXIDE

Max. Part No. Reg. Net Size Grit RPM 1-631- Price / Ea.

12,000

12,000

8,000

Medium 1-1/2" Fine Very Fine Medium 2" Fine Very Fine Medium 3" Fine Very Fine

$1.02.98.98

1.091.031.031.771.611.61

-840212-840213-840215-840312-840313-840315-840412-840413-840415

$.92.88.88.98.93.93

1.591.451.45

NOW!

Buff & Blend™ Discs

FEATURES:• Blending, cleaning, deburring and finishing.• Flexible, conformable discs

constructed of GP material, which provides a high

rate of cut while producing consistent finishes.

TYPE "S"

Call: 1-800-521-1740 Fax: 1-800-322-4292 Web: KBCTools.com

MEASURING & INSPECTION

16

Digimatic Caliper

Part No. 1-808-500196KTotal Value Price $170.05

$14454

FEATURES:• Range: 0-6" (0-150mm)• Resolution: .0005" (.01mm)• Scale contamination detection function.• Zero-setting of the display is also

possible at any slider position.• Large .295" high LCD digits.• The Absolute MyCal E-Z Caliper allows

direct measurements from power on. • Certificate of inspection provided.

12" Dial CaliperSeries 505

Part No. 1-808-505746Reg. Net Price $289.00

$24565

6" Precision Dial CaliperWith Thumb Roll

Part No. 8-100-006Reg. Net Price $29.55

$2364

12" Shock Proof Dial Caliper

FEATURES:• 4-way measurement.• Solid stainless steel construction.• Silky smooth movement throughout.• Dial graduations of 0.001" with one

revolution equivalent to 0.100".• Tough shockproof design.• Strong locking screw.• 1 year warranty.Supplied in a shop-hardened case.

Part No. 1-815-115Reg. Net Price $92.40

$6930

EC799 Electronic Slide Calipers

Electronic Calipers

EXPANDED LISTING!

6" x 150mm Pocket Steel Rule with Clip

FREE

FEATURES:• Accurately locate working edges, shoulders, grooves, center points, and scribed lines.• Time-saving positioning tools for jig

borers, milling and other machines.• Hardened and centerless ground to precision tolerance.• All sizes are 3" long.

Edge & Center Finders

* The Combo Type has a double head, with an edge finder on one end and a center finder on the other.

Single 1/2"

Double 1/2"

Single 3/8" Combo* 1/2"

1/2"1/2" & .2000" .2000".2000"

-260

-262

-263-264

$15.05

18.80

15.8022.80

$12.79

15.98

13.4319.38

Head Tip Part No. Reg. Type Shank Dia. 1-805- Net Price SALE!

Part No. 1-804-550Reg. Net Price $15.30

$1377

Center Finder

FEATURES:• Place tool in drill chuck or collet and line up pointer

with line scribed on shaft.• Accurately & quickly locates center on round workpieces.• Satin chrome finish.

Range: 0-6"Part No. 54-101-150Reg. Net Price $47.70

$3816

Range: 0-12"Part No. 54-101-300Reg. Net Price $120.35

$9628

Starrett #EC799A-6/150Range: 0-6" (0-150mm)Part No. 1-855-00142Reg. Net Price $173.00

$14705

Starrett #EC799A-12/300Range: 0-12" (0-300mm)Part No. 1-855-00148Reg. Net Price $359.00

$30515

Part No. 1-808-950300

FEATURES:• Resolution: .100"• Graduation: .001"• Stainless steel.• Improved finish on sliding

surfaces for longevity.• New face for easier readability.

Supplied in afitted plastic case.

• Can measure OD, ID, depth, and steps.• New designed dial movement for ultra smooth sliding and high shock protection.

FEATURES:• Resolution: .0005" (.01mm)• Zero at any position.• Large easy-to-read LCD, .32" high characters.• Lock screw to hold the slide position.• Integrated depth rod.• Last measuring position retained when shut-off.• Auto shut-off after 5 minutes of non-use.• Fine adjustment thumb wheel.• Lightweight, ergonomic design.• Hardened stainless steel body.• Linear accuracy meets DIN862.Supplied with a protective case.

FEATURES:• 4-way measurement.• Stainless steel frame.• Large easy-to-read display.• Resolution: .0005" (.01mm)• Direct inch/metric conversion.• Absolute/incremental measurement.Supplied with a molded case.

FEATURES:• Revolution: .100" • Easily used, accurate - read directly to .001" on large clear dial.• 4-way measurement.• Stainless steel with satin chrome finish.Supplied in a plastic case.

Major Credit Cards Accepted: 17Subscribe @ KBCTools.com to Get Exclusive Email Offers.

MEASURING & INSPECTION

Inch Radius GageSeries 186

FEATURES:• Range: 1/32-1/4"• No. of leaves: 30• Five measuring locations.• Identified with its particular radius.• Accuracy: ±.0016" (0.04mm).

Part No. 1-808-186101Reg. Net Price $47.75

$4059

FeelerGages

FEATURES:• Length of Blade: 3"• Number of Blades: 26• Blades made of finest feeler gage stock, hardened and tempered.• Each blade marked with thickness. • Lock nut holds blades securely in place. • Steel case protects blades. Tapered

1/4" Wide At TipPart No. 1-804-520

Reg. NetPrice $18.40

$1564

Straight1/2" Wide At Tip

Part No. 1-804-519Reg. Net

Price $18.40

$1564

THICKNESSESINCLUDED:.0015, .002, .0025, .003,.004, .005, .006, .007, .008,.009, .010, .011, .012, .013,.014, .015, .016, .017, .018, .019, .020, .021, .022, .023, .024, .025"

FEATURES:• 28 Blades included are both V, American National & U.S. Standard 60O threads.• Narrow leaf blade for internal and external thread.• Locking device at each end secures blades.• Each blade clearly marked with proper thread size.

Screw Pitch Gages

$21.35

18.45

21.35

21.35

$18.15

15.68

18.15

18.15

No. Of Part No. Reg. Type Groups Blades Included 1-804- Net Price

-511

-512

-513

-515

English

English

English/Metric

Metric

2

2

2

2

1. 4, 4-1/2, 5, 6, 7, 8, 9, 10, 11, 11-1/2, 12, 13, 14, 16 inch2. 18, 20, 24, 27, 28, 32, 36, 40, 44, 48, 56, 64, 72, 80 inch

1. 9, 10, 11, 11-1/2, 12, 13, 14, 15, 16, 18, 20 inch2. 22, 24, 26, 27, 28, 30, 32, 34, 36, 38, 40 inch

1. 4, 6, 8, 10, 11, 11-1/2, 12, 13, 16, 20, 28, 32, 40, 58 inch2. .5, .75, 1, 1.25, 1.5, 1.75, 2, 2.5, 3, 3.5, 4, 4.5, 5, 6 mm

1. .25, .3, .35, .4, .45, .5, .55, .6, .65, .7, .75, .8, .85, .9 mm2. 1, 1.1, 1.2, 1.25, 1.3, 1.4, 1.5, 1.6, 1.7, 1.75, 1.8, 1.9, 2, 2.5 mm

SALE!

Precision Radius Gagewith Handle

Tool No. RG1Part No.

8-410-009Reg. Net

Price $33.00

$2640

FEATURES:• Measuring Range: - .100-12 in Steps of .001" - .200-12 in Steps of .0001"• Tolerance of ±50 µ in.• Etched, unique serial numbers are included on each block.• Includes a certificate of calibration*.

Part No.1-855-99923Reg. NetPrice $451.00

$38335

81 Pc. Grade "B" Rectangular Gage Block Set

* Calibration performed at Webber Gage in Cleveland, OH. Certificate of Calibration with NVLAP accreditation.

Calibration in accordance with ISO 17025 with dated calibration certificate and NIST traceability number. Uncertainty of measurement (k=2): µ = 6+L where L is in inches, but µ not less than 7 µ in.

Supplied in high-quality

fitted wooden case.

Precision Steel Minus Pin Gage Sets

Starrett Part No. Reg. Description No. 1-855- Net Price

$91.00204.00310.00

$77.35173.40263.50

50 Pc. Set, Sizes .011-.060"190 Pc. Set, Sizes .061-.250250 Pc. Set, Sizes .251-.500

S4001-060S4003-250S4005-500

-67481-67483-67485

NOW!

Part No. 1-804-7110

Reg. Net Price$29.20

$2482

FEATURES:• Tempered blade.• Square/miter head features level vial & hardened scribe tool.• High contrast blade graduations.• Heads supplied with a hammertone powder-coat finish ... the ultimate.• Durable easy to read finished chrome blade.• 12" length, 1" width, 8ths, 16ths & 16ths, 32nds.

Carpenter’s Square

SPECIFICATIONS:Base Length .......................... 3" Base Width ....................... .210"Base Height ...................... .975"Slot Width ......................... .620"

T-Bar Depth Base Attachment

CALIPERNOT INCLUDED.

FEATURES:• Fits all brands of calipers.• Locking screw.• Black oxide plated.• Case hardened steel.

Fits 4-6" CalipersPart No. 1-850-Z9223Reg. Net Price $22.20

$1887

SET INCLUDES:• (9) Blocks .1001" - .1009" (Steps of .0001")• (49) Blocks .101" - .149" (Steps of .001")• (19) Blocks .05" - .95" (Steps of .05")• (4) Blocks 1" - 4" (Steps of 1")

FEATURES:• All gages are 2" long and hardened to RC 60/72.• All pin gages are manufactured to a 0.0002" tolerance.• All sharp corners are broken.• Each pin is centerless lapped and is clearly etched with the stated size. • Color coded, fully adjustable GO/NO-GO gage handle furnished with each set. • Inspection certificate included.• Sets are supplied in a rugged, high-impact protective case with each space marked for the appropriate gage.

USE FOR:• Setting micrometers.• Checking locations.• Measuring hole sizes & depths.• Checking distances between holes.• Quick, precision GO/NO-GO gaging.

FEATURES:• Range: 1/64" - 17/64" by 64ths & 9/32" to 1/2" by 32nds. • Number of Gages: 25• Satin chrome finish.• Five measuring surfaces for both convex and concave radii.• Designed for checking or laying out concave or convex radii.• Used for inspection, layout, pattern making and all other machining jobs.• Each gage is marked clearly with its size. Supplied in a fitted case.

Call: 1-800-521-1740 Fax: 1-800-322-4292 Web: KBCTools.com

MEASURING & INSPECTION

18

Protractor

SPECIFICATIONS:Measuring Range ..................... 360° (4 x 90°) Resolution ................................................. .05°Accuracy .................................................. ±.2°Repeatability ............................................. .05°Dimensions .... 2.375" L x 1.375" W x 2.375" H

Part No. 54-422-450 Reg. Net Price $98.08

$7846

Displayinverts for easy reading!

The Touch Off Gage allows you to standardize the way tool offsets are measured in your shop. To use this gage just lower the tool down onto the contact face until the indicator reads zero. At that point the tool tip is exactly 4 inches from the surface the Touch Off Gage is sitting on.

Part No. 1-811-52000Reg. Net Price $124.99

$10624

Touch Off Gage IP54 Large Display Electronic Micrometer

Part No. 1-815-525Reg. Net

Price $64.30

$5144

Part No. Reg. Range Remarks 1-808- Net Price

0-1" 1-2 2-3

Ratchet StopRatchet Stopw/ Standard

-103260-103262-103217

$122.00142.00159.00

$103.70120.70135.15

SALE!

Outside MicrometersSeries 103

IP66 Electric Digital Tool Setting Gage

Part No. 1-815-215Reg. Net Price $85.00

$5950

Micrometer Stand

Part No. 1-397-027Reg. NetPrice $29.20

$2336

2-12" Solid Rod Inside Micrometer SetSeries 124

Starrett No. 124BZPart No. 1-855-50546Reg. Net Price $331.00

$28135SPECIFICATIONS:Movement of Screw ....................... 1/2"No. of Rods ..................................... 10No. of Spacing Collars .............. (1) 1/2"

3-3/8" Bench Level

FEATURES:• Accurately machined base leveling surface.• Compact 3-3/8" bench level with a sensitive and accurate single vial.• Body made of seasoned

cast iron with black wrinkle finish.

Starrett #130Part No. 1-855-50560Reg. Net Price $41.50

$3735

6 Pc. Hardness Tester File Set

Part No. 8-570-100Reg. Net Price $136.45

$11598

FEATURES:• Gage graduations 0.001". • Gage repeatability 0.0002". • Accurately establishes tool length offsets for CNC milling machines. • The contact face is lightly spring loaded to protect against overrun. • Contact face diameter is 1/4". • The rectangular base and recessed indicator face allow it to fit between vise jaws on a pair of parallel bars. • Offset height 4" (101.6mm). • Large 2.2" easy to read indicator face. • Easy calibration check using 1-2-3 blocks. • Body and contact face are made from red anodized 6061-T6 aluminum. • Padded case and manual included.

FEATURES:• Range: 0-1" / 0-25mm.• Accuracy: 0.00015" / 0.003mm.• Resolution: 0.00005" / 0.001mm.• ABC / INC measurement.• Anodized aluminum alloy ratchet and friction thimble.• Ball attachment included.• Auto power off.• SPC data output port for cable and wireless data output option.Complete in a molded case.

FEATURES:• Can be adjusted to any position.• Provides desirable measuring position and angle for inside and outside micrometers.

FEATURES:• Graduation: .0001"• Clear graduations on satin-chrome finish.• Carbide faces.• Positive locking clamp.• Baked-enamel-finished frame.Complete with afitted carrying case.

FEATURES:• Graduations: .001"• Hardened & ground anvils on rods, adjustable for length. Head anvil is hardened and ground.• Measuring rods are solid and assembled on one side of the micrometer head.• Rods are insulated & marked with length.• Quick-reading figures - every thousandth numbered on inch reading tools.• Handle screws in the micrometer head in place of dummy screw, which is opposite a rod lock screw.Supplied with a fitted case.

This set includes 6 files - HRc 40 to HRC 60.Set provides a quick, inexpensive and simple way to check material hardness. No need to bringthe material to be tested over to a hardness testing machine. Just bring this file set to the piece being tested. Files have specially curved tips, which can reach into internal slots that cannot be tested byconventional hardness testers. Each file has a non-slip, color coded handle with the Rockwellvalue. Includes a fitted case with instructionsand conversion chart (Rockwell C to Vickers).

FEATURES:• Hold feature.• Instant 360° digital inclination display of any angle.• Embedded magnets with 3.5 lbs. pull.• Uses standard 9V battery (250 hrs.)

FEATURES:• Range: 1/2"• Accuracy: ±0.0015"• Repeatability: ±0.0001"• Resolution: 0.00005”/0.001mm.• Alert back lite will light-up when setting to zero.• IP66 Protective Reading.• 5 strong magnets on base.• Easy read super large lite display. • Uses CR2032 replacement battery.Supplied in a strong protective case.

Major Credit Cards Accepted: 19Subscribe @ KBCTools.com to Get Exclusive Email Offers.

MEASURING & INSPECTION

Electronic Height Gage

Starrett #3751AZPart No. 1-855-12221Reg. Net Price $290.00

$24650

Digimatic Height Gage Series 192

4 Pair Set with Plastic Case.3/16" x 1" x 6", 3/16" x 1-1/4" x 6",1/2" x 1-1/2" x 6", 1/2" x 1-3/4" x 6"

Part No.1-801-210Reg. NetPrice $46.50

$3500

1-2-3Block PairsFEATURES:• Parallelism: ±.0002"• Precision ground and hardened on all sides.• Hardness HRC 56-60.• Ideal for mounting work

for precision grinding and layout.

YOUR CHOICE$1295

1" x 2" x 3"w/ 23 Holes Per Block.Five 3/8"-16 Tapped HolesPart No. 1-806-003T

1" x 2" x 3"w/ 1 Hole Per BlockPart No. 1-806-003H

Part No. 1-808-192632 Reg. Net Price $2,770.00

$2,35450

FEATURES:• Set consists of 2 machinist jacks supplied in a shop-hardened case.• Individual jacks consist of a heavy, steel cast base with adjustable steel screw and tilting swivel head, with a lock nut for permanent positioning.• 1-1/2" jack base for added stability.• Range: Min: 3", Max: 4"• Lifting capacity: 1,000 lbs.

Machinist Jack Set

Part No. 52-104-025Reg. Net

Price $18.59

$1580

THIN BLADE WITH WIDE BEAM

FEATURES:• Hardened blade.• Made of finest steel.• Accuracy to workshop grade.• Square accurate both inside and outside.

Machinists’ Steel Squares

Beam Part No. Reg. Size Length 1-397- Net Price

2" 1-1/2" 3 2-1/2 4 3 6 4

-002X-003X-004X-006X

$5.145.445.918.42

$6.056.406.959.90

SALE!FEATURES:• Width: 1/2"• Micro fine graduations.• Satin chrome, no-glare finish.• Hardened and tempered steel.

$9.70 9.709.709.709.70

Part No. Reg. Grad. 1-804- Net Price 4R 16R 5R 3R E/M

-459-460-461-462-463

$8.73 8.738.738.738.73

SALE!

GRADUATIONS:• 4R: 8ths, 16ths, 32nds & 64ths• 5R: 32nds, 64ths, 10ths & 100ths• 16R: 32nds, 64ths, 50ths & 100ths• 3R: 32nds, 64ths, 10ths & 50ths• E/M: .5mm, mm, 32nds & 64ths

4 Pc. Measuring Tool Set

Part No. 8-135-4004Reg. Net

Price $55.00

$4400

Electronic Height Offset Sensor

A

B

CFEATURES:• Repeatability T.I.R. within .0002"-.0006mm.• Four high visible lights.• Made of high quality tool steel hardened to 60 RC.• Easily replace lamp and battery.• Precision ground on all surfaces.• One-piece design construction

gives strength and accuracy.

SPECIFICATIONS:A .............................. 1"B ......... 2.000" ± .0002"C ......................... .310"

Part No. 1-801-310Reg. Net

Price $129.15

$10978

One 15X (15mm) and 20X (10mm) swing out double lens systems in chrome plated brass case. Vinyl carrying case.

DoubleCoddington MagnifierDONEGAN

Part No. 1-700D-V-400Reg. Net Price $26.45

$2248

SET INCLUDES:• 90O Knife Edge Square• Stainless Steel Ruler: 6"• Outside Micrometer: 1", .0001" Graduation• Dial Caliper: 6", .001" Graduation Supplied with a fitted plastic case.

Inch Set

FEATURES:• Hardness: Case hardened to RC 55-62 on 2 sides top and bottom only. • Dimensions: Within 0.001” allowance. • Made from fine quality tool steel stress relieved against distortion, precision ground and hardened. • Tolerance: Parallel 0.0003" on 2 sides, top and bottom. • The holes are designed for easier handling and set-ups.

Matched Pairs 5 Holes

Precision Parallel Set

FEATURES:• Range: 0-24" (0-600mm)• Resolution: .0005" (.01mm)• Linear Accuracy: ±.002"• SPC data output.• Double-column structure for

high measuring accuracy.• Functions Include: Zero-

Setting, ABS/INC Switching, 2-Presets, Probe Tip Diameter Compensation, Power on/off, Data Hold, -/+ Switching,

Inch/mm Conversion, Alarm (Low Voltage, Counting

Valve Composition Error).• Includes: Carbide-tipped scriber and 2 scriber clamps.

FEATURES:• Range: 0-6" (0-150mm)• Resolution: .0005" (.01mm)• Linear Accuracy: ±.001" (±.02mm)• Easy-to-read LCD with .32" high characters.• Rounded nose scriber cuts clean, sharp lines.• Inch/millimeter conversion and zero at any position.• Manual on/off with auto off after 5 min. of non-use.• Scriber can reference zero from the base bottom.• Long life hardened, stainless steel bar.• Slide lock and fine adjustment thumb roll.• Hardened, ground, and lapped base.Supplied in a case.

6" Flexible Steel Rules

Call: 1-800-521-1740 Fax: 1-800-322-4292 Web: KBCTools.com

MEASURING & INSPECTION

20

Dial IndicatorGroup 2

SPECIFICATIONS:Range One Rev. .................................. .100" Total ........................................ 1.000"Graduation ................................... .001"Dial Reading ............................... 0-100

Part No. 1-808-2416SKTotal Value $129.95

$11046

22 Pc.IndicatorPoint Kit

FREE

IP65 Extended Range Test Indicator

Part No. 1-815-355Reg. Net Price $80.00

$6400

11 Pc. Mini Point AGD Drop Dial Indicator Point Kit

11 Pc. KitPart No. 1-850-Z9001Reg. Net Price $10.07

$906

Smaller version of the Select-A-Point Kit. Consists of 11 points. One stem point and 10 flat, ball, and cone points. All points have 4-48 thread and are made from corrosion resistant Type 303 Stainless Steel.

®

Twice the Test for Less!

White FaceIndicator & HolderPart No.8-135-0014Reg. NetPrice $54.95

$4396

2 Pc. Set-Up &Inspection Kit

IP54 X -PROOFINDICATOR FEATURES:• Travel: 1".• Reading: .001"• Sealed back plate.• Tolerance markers.• Rubber bellows on stem.• AGD Group 2, 2-1/4" dia.• O-Ring seal on safety cap.• Lug back and carbide point.• Robust, shockproof design.• Continuous Reading: 0-100.• O-Ring protection for bezel & rotating dial. All packed in a shop-Hardened case!

Part No. 52-585-155

Reg. Net Price $85.08 $6806

Water ResistantIndicator Set

FEATURES:• Accurate and reliable.• Simple and smooth to operate.• Rugged, with few moving parts.• Shank Diameter: 1/4" (6.3mm)• Indicator with 3 contact points and adapter.

Universal Back Plunger Dial Test IndicatorSeries 196

Starrett #196B1Part No.

1-855-50699Reg. Net

Price $148.00 $12580

SPECIFICATIONS:Range ................................. .200"Graduation .......................... .001"Dial Reading ...................... 0-100

KIT INCLUDES:• Flat Point (6): 7/32" dia. x 1/4" long 7/32" dia. x 3/8" long 7/32" dia. x 1/2" long 7/32" dia. x 5/8" long 7/32" dia. x 7/8" long 7/32" dia. x 1-1/4" long• Bent Stem Point (1): 1/16" dia. x 5/16" long• Ball Point (2): 7/32" dia. x 7/32" long 7/32" dia. x 5/8" long • Cone Point (2): 7/32" dia. x 3/4" long 7/32" dia. x 5/8" long

White FacePart No. 8-100-001Reg. NetPrice $15.95

$995*Includes NIST Certificate of Calibration.

Dial Part No. Reg. Grad. Dia. 52-562- Net Price .0005"* 1-1/2" .0005 1 .001 1

-001-002-003

$129.77129.77129.77

NOW!$110.30

110.30110.30

FEATURES:• Range: 0.060"• Swivel Arc: 210°• 2 Dovetail stems.• Automatic reversal.• Revolution counter.• Jeweled movement.• Dial Reading: 0-15-0• Easy-to-read tilted dial.• Includes extra .040" & .120" contact points.• Tungsten Carbide Point: .080"

Horizontal Dial Test Indicators

FEATURES:• Range: 0.060"• Swivel Arc: 210°• 2 Dovetail stems.• Automatic reversal.• Revolution counter.• Jeweled movement.• Dial reading: 0-15-0.• Easy-to-read tilted dial.• IP65 Protective Rating.• Tungsten Carbide Point: .080"• Includes extra .040" & .120" contact points.• 1 year warranty.Complete witha molded case.

0-1" Dial Indicator

FEATURES:• 4-48 thread.• Graduation: .001"• Revolution counter.• .100 per revolution.• Dial Reading: 0-100• Diameter Stem: 3/8" • Dial Diameter: 2-1/4" • Lug back.

SATISFACTION GUARANTEED!

FEATURES:• 2-1/4" dia. face.• Continuous dial reading.• Spindle rack, pinions & pivots of hardened stainless steel.• Satin-finish chrome plated forged brass case.• Lug-on-center back, mounted vertically.• Accuracy meets Federal Specifications.• Chrome plated stem.• Contact point is of hardened, ground and chrome plated tool steel.

INCLUDES:• Test Indicator: .030 x .0005"• Test Indicator Holder: 1-7/8"• (2) Stems: 5/32" & 3/8"Supplied in afitted plastic case.

MAGNETIC BASE FEATURES:• 85 lb. pull.• Fine adjustment.• On/off lever release magnet.• V-base for placing on round surfaces.• Also mounts test indicators with 1/4" post.• Base Dimensions: 2" x 2-11/32" x 1-13/16"

Major Credit Cards Accepted: 21Subscribe @ KBCTools.com to Get Exclusive Email Offers.

MEASURING & INSPECTION

Model No. DG6160Part No. 1-457-917Reg. Net Price $132.15

$10572

Fat & Fab DoubleFine AdjustmentMagnetic Base

3D Universal Mini Magnetic Base

Part No. 1-815-250Reg. Net Price $45.50

$2995

SALE!

Bore GagesSeries 3089

* Includes one 2" extension.

0.7-1.5" 6" 10 2 1.4-2.4 6 6 4 2-6 6 11 4

Starret Measuring Probe Part No. Reg. No. Range Depth Contacts Spacers 1-855- Net Price

-12456-12457-12458

3089Z-131-715J3089Z-131-1424J3089Z-131-26J*

$264.00264.00295.00

$224.40224.40250.75

SALE!

0-22" Depth Gage

Part No. 52-125-006Reg. Net

Price $125.00

$10000

0-4" Depth MicrometerSeries 129 - Interchangeable Rod Type

Supplied witha fitted case.

Part No. 1-808-129131Reg. Net Price $213.00

$18105

0-6" Depth Micrometer

Part No. 1-812-303Reg. Net Price $88.25

$5700

SPECIFICATIONS:Flatness ....... . .00005"Full Square ............ 6"Height .................. 10"Base ...................... 2"

FEATURES:• Extreme stability.• Maintenance free.• Microscrew fingertip control.• Accepts all A.G.D. indicators.• Ideal for use with the most accurate dial indicators.

"Granite Chek"Perfect for Every Machinist, Inspector or Toolmaker!

With Fine AdjustPart No. 1-807-500Reg. NetPrice $49.00

$3920

Telescoping Gage Set"DOUBLE ACTION" Self-Centering

FEATURES:• Satin chrome finish.• Rigid handle with self-centering feature.• Complete set of 6 (5/16"- 6") in plastic case.• Made of hardened tool steel.

Part No. 8-412-004CReg. Net Price $18.50

$1573

FEATURES:• Base Length: 4"• Graduation: .001"• Rods: 4 pcs. - .157" diameter interchangeable rods, with lapped measuring end, are calibrated and tested at the factory. Rods are adjustable length, to compensate wear on the measuring tip, with 2 supplied wrenches.• Ratchet stop for consistent & repetitive measurements.• Crisp, clear graduations on the thimble.• Satin-chromed finished throughout.

FEATURES:• Graduation: .001"• Base Length: 4"• Measure the depth of small holes & slots.• High accuracy interchangeable rods.

Supplied with a case.• Ratchet stop for consistent and repetitive measurements.• Satin chrome finish.

FEATURES:• Satin chrome finish.• Rods connect together for full 22" capacity.• Includes 2 extra points for small hole applications.Supplied with ashop-hardened case. SPECIFICATIONS:Base Size .......................... 4"Graduation .................... .001"Travel ............................. 0-1"

FEATURES:• 2-point contact.• Graduation: .0005"• Carbide contacts for extended wear.• All anvils laser marked for easy selection.• Gage chart for quick & easy anvil selection.• Ergonomic design with non-slip insulating grip.• Includes sturdy aluminum case with cutouts for gage and all accessories.

FEATURES:• Power pull: 50 lbs.• Overall reach: 7.5"• ON/OFF magnet switch.• V-groove magnet bottom surface for curved surface.• Anodized universal arm with one knob central lock.• Dovetail clamp for test indicator.• Clamping hole for indicator stem.• Complete with a protective molded case

with space for test and dial indicator storage.• 1 year warranty.

FEATURES:• Five axis holder.• Double Fine Adjustment: - Top: Universal Swivel Clamp - Bottom: Unique Single Direction• Powerful on/off magnetic

base (176 lbs./ft.).• Holds 6mm, 8mm, 3/8",

dovetail and back lug.• Fast and easy to set-up gauges into required position.• Instant fixation in any position.• Unique central locking mechanism with NOGA designed spring loaded bearing.• Black finished arms.• Bottom Arm: 4.33"• Top Arm: 3.98"

Call: 1-800-521-1740 Fax: 1-800-322-4292 Web: KBCTools.com

TOOLROOM ACCESSORIES

22

Hold-Down Toggle Clamps

Most suitable for holding down sheetmetal or circuit boards. Many spindle bar and base combination available to suit your application.

* U-Bar, Flanged Base ** Fixed Bar, Flanged Base

SUPPLIED WITHSPINDLE ASSEMBLY.

HORIZONTAL HANDLE Height Holding Under Overall Capacity Part No. Reg. Base Length (lbs.) 1-990- Net Price

5/16" 3-1/16" 60 3/8 3-3/16 60 1 5-7/16 200 1-3/8 6-19/32 500 1-3/4 10-3/8 750

-201*-201A**-201B*-225D*-20235*

NOW!$5.69

5.697.759.60

14.09

$4.844.846.598.16

11.98

T-Slot Toe Clamp

1.94

1.00 1.12

.62.38

FEATURES:• Low profile cam action clamp with positive downforce.• Clamp is mounted in the T-Slots of machine tables by sliding the clamp to the workpiece &

tightening the locking screw.• Two Clamping Edges: - Smooth for Machined Surfaces - Serrated for Rough Cut Material

$34.1734.1734.1736.17

$40.2040.2040.2042.55

9/165/8

11/163/4

-24128-24148-24168-24188

T-Slot Part No. Reg. Size 1-904- Net Price NOW!

® Regular DutyExtra Deep ThroatDrop Forged

High Visibility Safety ClampsSeries 400CS

Throat Spindle Min. Proof Ship Wgt. Part No. Reg. Capacity Depth Diameter Test (lbs.) (lbs.) 1-550- Net Price

0 - 2" 2" 1/2" 3,500 1-1/2 0 - 3 2-3/8 5/8 3,500 1-3/4 0 - 4 2-3/4 3/4 6,500 2-3/4 0 - 6 3-5/8 3/4 6,900 4-3/4 0 - 8 4-1/2 3/4 6,900 8-1/2 0 - 10 5-3/8 7/8 8,000 10-1/2 0 - 12 5-3/4 7/8 9,500 14

-H402CS-H403CS-H404CS-H406CS-H408CS-H4010CS-H4012CS

$14.7720.4129.1144.3056.4680.78

125.96

$12.5517.3524.7437.6647.9968.66

107.07

SALE!

CD

F

A B

E

T-Slot Nuts

$2.122.122.352.562.613.542.98

Table Ref. No Thread Slot Part No. TN A B C D E F 1-903-

-41404-41405-41406-41409-41410-41411-41412

437 3/8-16 7/16" 1/2" 7/32" 11/16" 7/8" 500 3/8-16 1/2 1/2 9/32 7/8 7/8 562 3/8-16 9/16 5/8 11/32 7/8 1-1/8 563 1/2-13 9/16 5/8 11/32 7/8 1-1/8 625 1/2-13 5/8 5/8 11/32 1 1-1/8 626 1/2-13 5/8 3/4 3/8 1-1/8 1-1/8 687 1/2-13 11/16 3/4 7/16 1-1/8 1-1/4

ONLY!

Last thread incomplete to preventstud from turning through bottom of nut into machine table. Tapped thru T-nuts are available upon request. T-Slot Nuts are undersized to fit machine table slot. Case Hardened • Black Oxide Finish

Steel Spring ClampsMade with vinyl tips to prevent marring & vinyl handles for a non-slip grip. Features a heavy-duty spring for a tight fit & nickel plating to prevent corrosion.

Clamping Throat Approx. Part No. Reg. Capacity Depth Weight 1-820B- Net Price

1" 1-1/4" .17 lbs. 2 2-1/4 .40 3 3-5/16 .80

-XM3-XM5-XM7

$1.883.025.33

$1.602.574.53

NO PADS NO TIPS 1" 1-1/4" .17 lbs. 2 2-1/4 .40 3 3-5/16 .80

-XM3-NPT-XM5-NPT-XM7-NPT

$1.883.025.33

$1.602.574.53

SALE!

STB FEATURES:• "Super-Tuff" Bessey.• Hex head spindle.• Economical standard pad.

SQ FEATURES:• Specifically designed to target the

4", 6", 8" and 12" "C" clamp but more efficient and less costly.

• Moveable sliding arm design saves 90% of clamping time vs. the ordinary "C" clamp.• Deep throat has greater reach and

eliminates the need to purchase regular and deep throat "C" clamp.

Model Throat Part No. Reg. No. Opening Depth Rail Size 1-820B- Net Price

6" 4-3/4" 27/32" x 13/32" 8 4-3/4 1-3/16 x 9/1612 5-1/2 1-3/16 x 9/1620 4-3/4 1-3/16 x 9/16

12" 7" 1-9/16" x 3/4"20 7 1-9/16 x 3/4

-015-016-018-019

-020-021

SQ-4SQ-8SQ-12SQ-20

STB30STB50

$45.8284.81

105.32142.05

208.25239.88

SQ SERIES "SUPER QUICK" CLAMPS

STB SERIES "SUPER TUFF" CLAMPS

$41.2476.3394.79

127.84

187.42215.89

SALE!

All Steel Industrial Clamps Series SQ & STB

Fast, EconomicalWorkhorses!

Driver Type Studs

Black Oxide Finish

$1.301.371.331.351.421.471.451.471.541.56

Part No. Length 1-903-

-40701-40702-40703-40704-40705-40706-40707-40708-40709-40710

1-1/2"22-1/233-1/244-1/255-1/26

ONLY!

THREAD SIZE: 1/2-13 Part No. Length 1-903-

1-1/2"22-1/233-1/244-1/255-1/26

ONLY!

THREAD SIZE: 3/8-16

$1.281.301.301.311.311.331.331.351.441.42

-40501-40502-40503-40504-40505-40506-40507-40508-40509-40510

With 1" Thick Step Blocks.

9/16" 1/2-13 5/8 1/2-13 11/16 1/2-13 11/16 5/8-11 3/4 5/8-11 13/16 5/8-11

T-Slot Table Part No. Reg. Size Stud Size 1-903- Net Price

$210.91186.99202.84261.43262.55273.12

-20401-20402-20403-20415-20416-20417

$168.73149.59162.27209.14210.04218.50

SALE!

Supplied with a metal case.

Part No. 1-904A-20402Reg. Net Price $100.19

$8015

SET INCLUDES:• (6) T-Slot Nuts• (6) Flange Nuts• (4) Coupling Nuts• (6 Step Blocks• (6) Serrated End Clamps• (1) T-Slot Cleaner• (24) Studs, 4 each: 3", 4", 5", 6", 7", 8" lg.

Stud Size: 1/2-13Table T-Slot Size: 5/8"

Machinist ClampingSets

Supplied witha plastic case.

SETS INCLUDE:• (6) T-Slot Nuts• (6) Flange Nuts• (4) Coupling Nuts• (6) Step Blocks• (6) Serrated End Clamps• (24) Studs, 4 each: 3", 4", 5", 6", 7", 8" lg.

FEATURES:• Drop forged frame c-clamp with an anti-spatter, copper plated spindle, swivel pad, and cross-pin handle.• Acme roll spindle threads provide user with maximum strength and clamping force.

Major Credit Cards Accepted: 23Subscribe @ KBCTools.com to Get Exclusive Email Offers.

TOOLROOM ACCESSORIES

SUPPLIED WITH SPINDLE ASSEMBLY.VERTICAL HANDLE

* U-Bar, Flanged Base, Straight Handle** Fixed Bar, Flanged Base, Straight Handle† Fixed Bar, Straight Base, Straight Handle

Height Holding Overall Under Overall Capacity Part No. Reg. Height Base Length (lbs.) 1-990- Net Price

2-61/64" 41/64" 1-31/32" 100 3-3/4 29/32 2-17/32 200 3-3/4 29/32 2-17/32 200 3-3/4 29/32 2-17/32 200 5-1/2 1-1/4 4-9/16 500 3-7/16 1-1/4 4-9/16 500 3-7/16 1-1/4 4-9/16 500 7-1/2 1-11/16 5-17/32 750 8-7/8 2 6-15/16 1,000

-101A*-12050**-12055†-12050U*-12130**-12142**-12147†-12265*-10247*

NOW!$7.08

8.378.408.34

10.5710.5710.5715.4823.42

$6.027.117.147.098.988.988.98

13.1619.91

FEATURES:• Marked every 6" with a line, thickness in thousandths of an inch.• Includes No. 667 thickness stock.• Case provides the ability to snip off the desired

length without any waste & useful for cutting off the required length for adjusting tappets, spark plugs,

distributor points, checking bearing clearances etc.• Also useful for shimming in fixturing & die work.• Made of the finest tempered steel.

Thickness Gage in RollsSeries 666 - 25' Long

$238.5097.2052.2051.3054.9054.9037.8037.8037.8037.8037.8034.2034.6535.1035.1034.65

$265.00108.00

58.0057.0061.0061.0042.0042.0042.0042.0042.0038.0038.5039.0039.0038.50

Starrett Part No. Reg. Number Thickness 1-855- Net Price

666-1/2666-1666-1-1/2666-2666-2-1/2666-3666-4666-5666-6666-7666-8666-10666-12666-13666-14666-15

-64210-52796-52797-52798-52799-52800-52801-52802-52803-52804-52805-52807-52809-52810-52811-52812

.0005"

.001

.0015

.002

.0025

.003

.004

.005

.006

.007

.008

.010

.012

.013

.014

.015

SALE!

Supplied ina rewindable dispenser case.

Oil Hardening Drill Rods36" Length GroundDrill Rods.0-1 Quality Non-Distorting

Tolerance: Plus or Minus .0005"

METRIC SIZES

$2.733.133.414.315.455.937.158.62

10.6013.0615.0017.0719.7322.6124.8428.4932.0234.7230.1833.3438.3638.8643.3847.12

Size Decimal Part No. (mm) Equiv. Inches 1-950M

2 0.0787 3 0.1181 4 0.1575 5 0.1969 6 0.2362 7 0.2756 8 0.3150 9 0.3543 10 0.3937 11 0.4331 12 0.4724 13 0.5118 14 0.5512 15 0.5906 16 0.6299 17 0.6693 18 0.7087 19 0.7480 20 0.7874 21 0.8268 22 0.8661 23 0.9055 24 0.9449 25 0.9843

-002-003-004-005-006-007-008-009-010-011-012-013-014-015-016-017-018-019-020-021-022-023-024-025

ONLY!

FRACTIONAL SIZES

$2.212.412.652.792.683.173.343.573.434.374.695.024.545.485.946.235.777.277.82

Part No. Part No. Size 1-950- Size 1-950-

1/16" 5/64 3/32 7/64 1/8 9/64 5/32 11/64 3/16 13/64 7/32 15/64 1/4 17/64 9/32 19/64 5/16 21/64 11/32

23/64" 3/8 25/64 13/32 27/64 7/16 29/64 15/32 31/64 1/2 17/32 9/16 19/32 5/8 21/32 11/16 23/32 3/4 25/32

-004-005-006-007-008-009-010-011-012-013-014-015-016-017-018-019-020-021-022

-023-024-025-026-027-028-029-030-031-032-034-036-038-040-042-044-046-048-050

ONLY! ONLY!$8.72

7.7310.0010.7311.6912.0113.4513.7615.3613.0816.6218.6620.7719.7825.1627.5930.2527.8627.51

13/16 27/32 7/8 29/32 15/16 31/32 1 1-1/16 1-1/8 1-3/16 1-1/4 1-5/16 1-3/8 1-7/16 1-1/2 1-5/8 1-3/4 2

-052-054-056-058-060-062-100-104-108-112-116-120-124-128-132-140-148-200

$30.5932.4929.2637.9940.0042.9138.6248.9250.4061.2959.8271.7369.9385.9482.47

105.31122.21139.05

Part No. Size 1-950- ONLY!

B*

CDA ±.0002BALL DIA.

±.0002TOOLMAKERSConstructionTooling BallsPrecision ground shoulder provides precise "C"dimension to facilitatelocating ball centerline.Heat treated steel.

*– Slip fit shank tolerance is plus .0000", minus .0004".– Press fit shank tolerance is plus .0003", minus .0000".– Ball and shank are concentric within .0002" T.I.R.

$17.6018.3619.1020.8526.39

-26805-26810-26815-26820-26830

-26806-26811-26816-26821-26831

.2500" .1250" .200" 9/16" .3750 .1875 .300 3/4 .5000 .2500 .400 15/16 .5000 .2500 .500 1-3/8 .7500 .3750 .500 1-1/4

Part No. 1-901- Slip Press Reg. A B* C D Fit Fit Net Price

$15.8416.5217.1918.7723.75

SALE!

Metric Keystock

RECTANGULAR Size Part No. Reg. W x T (mm) 1-958- Net Price

$4.455.906.959.309.00

11.8014.1513.2521.2023.6023.6028.0047.1054.45

119.70129.70

-05020-05035-05040-05050-05060-05065-05070-05075-05080-05085-05090-05095-05100-05105*-05110*-05115*

8 x 7 10 x 8 12 x 8 14 x 9 12 x 10 16 x 10 18 x 11 20 x 12 22 x 14 25 x 14 28 x 16 32 x 18 36 x 20 40 x 22 45 x 25 50 x 28

$3.564.725.567.447.209.44

11.3210.6016.9618.8818.8822.4037.6843.5695.76

103.76

NOW!

*Only available in plain finish.

FEATURES:• True metric keystock that conforms to metric keyway specifications.• Material is high quality, cold drawn steel, C1020 to C1045.• All sizes meet ISO R773, and BS 4235 and most sizes meet DIN 6880.

Gold dichromate plating on most sizesmakes product identification easy.

Size Part No. Reg. (mm) 1-958- Net Price

$6.204.452.552.653.007.354.306.209.45

16.2016.2020.0525.0558.8533.10

2 3 4 5 6 7 81012141618202225

-04000*-04005*-04010-04015-04020-04025-04030-04035-04040-04045-04050-04055-04060-04065-04070*

$4.963.562.042.122.405.883.444.967.56

12.9612.9616.0420.0447.0826.48

NOW!

SQUARE

12"Lengths

Machinery’s Handbook30th Edition

TABLE OF CONTENTS• Mathematics• Mechanics and Strength of Materials• Properties, Treatment, and Testing of Materials• Dimensioning, Gaging, and Measuring• Tooling and Toolmaking• Machining Operations

• Manufacturing Processes• Fasteners• Threads & Threading• Gears, Splines, and Cams• Machine Elements• Measuring Units

For more than 100 years. Machinery'sHandbook has been the most popular referencework in metalworking, design, engineering and manufacturing facilities, and technical schools and colleges through-out the world. The 30th edition of the "Bible of the Metal working Industries" contains major revisions of existing content, as well as new material on a variety of topics. It is the essential reference for mechanical, manufacturing, and industrial engineers, designers, draftsmen, toolmakers, machinists, engineering and technology students, and the serious home hobbyist. 2,896 pp.

Toolbox Edition (4.6" x 7")Part No. 1-961-05530Reg. NetPrice $109.95

$8246

Large Print (7" x 10")Part No. 1-961-06530Reg. NetPrice $129.95

$9746

Call: 1-800-521-1740 Fax: 1-800-322-4292 Web: KBCTools.com

MACHINERY

24

Model TF-1420Part No. 6-398-006

$13,79500FINANCE AS LOW AS $317.29/mo.CALL FOR DETAILS

Model HVBS-712Part No. 6-200-033

$1,49900

Horizontal/VerticalBandsaw

FEATURES:• Portable, take to the job & plug it in.• 7" round, 7" x 12" rectangular capacity.• 3/4 HP, 115V, 1 PH. • Hydraulic feed control.• Built-in coolant system.• 4 blade speeds.• 3/4" x 93" blade.• Shipping Weight: 400 lbs.

®

14-1/2" Capacity Gravity FeedVertical Saw

FEATURES:• 1 HP Motor, 1 Phase.• Accepts blades from 1/4"-3/4" wide.• Accurate gravity feed with hydraulic speed control and depth stop.• Speeds (4): 70-525 SFPM• Rugged simple construction for easy maintenance and long service life.• Shipping Weight: 700 lbs.

Model EFPart No. 6-398-005

$5,19500FINANCE AS LOW AS $119.49/mo.CALL FOR DETAILS

9" x 16"HorizontalBandsaw

Model BAH-916Part No. 6-271-025

$2,69500

$70.00Value!

Spare H.S. Blade IncludedFREE

FEATURES:• 1-1/2 HP, 115/230V, 1 PH.• 9" round, 3" x 16" or 9" x 13" rectangular capacity @ 90°.• 4 blade speeds with 1" x 129" blade.• Hydraulic feed control.• Built in coolant system.• Shipping Weight: 800 lbs.

FEATURES:• Large 14" x 20" cutting capacity at 90°, 14" x 13" at 45°.• Infinitely variable blade speeds from 50-400 ft./min. via A.C. inverter speed control - full moto torque through entire speed range!• Infinitely variable feed from 0-150 lbs.(via. air/hydraulic system).• Tilt frame design enables angle cuts without having to move the stock.• Shipping Weight: 1,300 lbs.

Vertical TiltFrameBandsaw

Automatic CycleBandsaws

MODELBS-15A SHOWN

FEATURES:• Cast iron construction.• Full auto cycle.• 3 HP drive motor.• 1" bi-metal blade.• Shipping Weight: 2,100 or 2,500 lbs.

Model BS-12A(12" Round Cap.)Part No. 6-275-007

$10,99500FINANCE AS LOW AS $252.89/mo.CALL FOR DETAILS

Model BS-15A(15" Round Cap.)Part No. 6-275-009

$13,29500FINANCE AS LOW AS $305.78/mo.CALL FOR DETAILS

FEATURES:• Portable, take to the job & plug it in.• 3/4 HP, 115V, 1 phase.• Built in coolant system.• Hydraulic feed control.• 7" round & 7" x 11" rectangular capacity.• 4 blade speeds.• 3/4" x 93" blade.• Shipping Weight: 400 lbs.

Model BAH-712Part No. 6-280-005

$1,09900

Horizontal/Vertical Bandsaw

Major Credit Cards Accepted: 25Subscribe @ KBCTools.com to Get Exclusive Email Offers.

MACHINERY

FEATURES:• 10" x 18" capacity.• Built-in blade welder.• Do-All® type blade guides.• Infinitely variable blade speed.• 1 HP, 1 PH drive motor.• Shipping Weight: 1,000 lbs.

Vertical Bandsaw

BAV-450Part No.

6-395-027

$4,45000

FINANCE AS LOW AS $102.35/mo.

CALL FOR DETAILS

Variable Speeds

& Built-in Blade Welder

with Purchase ofany Surface Grinder

5 Gallon Pailof GRINDZALTM

Pure SyntheticGrinding CoolantPart No. 1-123-065

$95.60 Value!

FREE

FEATURES:• Cartridge spindle with ABEC-7 precision spindle bearings.• Double "V" saddle ways, H-frame column design and heavyweight.• Oversize spindle housing and flange mount design allows heavier grinds than with other similar size machines.• Ultra high column with 21" spindle to table.• Roller ways for smooth effortless table travel.• Construction gives this machine exceptional rigidity.• Shipping Weight: 2,500 lbs.

6" x 18" Manual Surface Grinder 2 HP Motor, 230V, 3 PH

ModelKGS-618MPart No. 6-273-003

$8,84500FINANCE AS LOW AS $203.44/mo.CALL FOR DETAILS

Complete withfull coolantsystem, 6" x 18" permanent magnetic chuck, grinding wheel& wheel mount.

6" x 18" Manual Surface Grinding Machine

FEATURES: • 2 HP Motor, 230V, 3PH• Balancing base and arbor for precision balancing of grinding wheel.• Cartridge-type grinding spindle with precision spindle bearings.• Roller ways for smooth effortless table travel.• Double "V" saddle way design for precision cross travel.• One-shot lube system provides oil to all sliding surfaces.• Max. Distance Spindle to Table: 15-3/4"• Shipping Weight: 1,850 lbs.

Model SG-618Part No. 6-271-015

$6,89500

FINANCE AS LOW AS $158.59/mo.CALL FOR DETAILS

10" x 20" 3-Axis Auto Feed Surface Grinder

Model SGS-1020AHDPart No. 6-273-015

$21,15000FINANCE AS LOW AS $477.57/mo.CALL FOR DETAILS

FEATURES:• 10" x 20" grinding capacity.• Automatic lubrication system.• 3-axis automatic movement with incremental downfeed in .0001" steps.• Precision hand scrapped turcite table & saddle ways.• Rapid elevation motor for quick and easy positioning.• High column design with 19" spindle center to table.• Shipping Weight: 3,400 lbs.

INCLUDES:8" x 20" Magnetic Chuck, Dust-suction Coolant and Overhead Dresser.

Complete withflood coolant system, 6" x 18" permanent magnetic chuck, grinding wheel & wheel mount.

12" Disc & 6" x 48" Belt Heavy-DutyCombination Sander

Model WS1712Part No. 6-397-WS1712

$70560

FEATURES:• 1-1/2 HP, 115V, 1 PH motor.• Precision ground cast iron tables.• On/off toggle switch with safety key.• Cabinet style stand with power coated paint.• Heavy-duty mitre gauge.• Quick-change belt release.• Shipping Weight: 230 lbs.

FEATURES:• Heavy-duty cast iron construction.• Hand wheel for raising and lowering table.• Powerful 2 HP direct drive motor with 3 PH.• For use on all materials; wood, metal & plastics.• 20" solid metal disc is high speed balanced for smooth vibration free operation.• Shipping Weight: 550 lbs.

20" Disc Sander/Grinder

Model DS-20Part No. 6-150-010

$1,49000

COMPLETE WITH:• Wheel Kit• ON/OFF Switch• Manual & Parts List• (1) 16" x 1" Abrasive Wheel

16" Heavy Duty Cut-Off SawFEATURES:• Vise swivels to 45°.• Heavy-duty cast iron frame upper & lower.• Motor: 5 HP, 230V, 3PH• Spindle Speed: 3,000 RPM• Capacity: Pipe - 3",

Round Solid - 2"• Shipping Weight: 258 lbs.

Model COS-16Part No. 6-100-010

$83500

Call: 1-800-521-1740 Fax: 1-800-322-4292 Web: KBCTools.com

MACHINERY

26

Complete with

DP-700Digital ReadoutINSTALLED!

Model HW-30160(30" x 160")

Part No. 6-273-079

$46,59500FINANCE AS LOW AS $1,052.12/mo.CALL FOR DETAILS

Part No. 6-273-079-N

$52,29500FINANCE AS LOW AS $1,180.82/mo.CALL FOR DETAILS

Model HW-2680(26" x 80")

Part No. 6-273-072

$31,75000FINANCE AS LOW AS $716.92/mo.CALL FOR DETAILS

Part No. 6-273-072-N

$35,29500FINANCE AS LOW AS $796.96/mo.CALL FOR DETAILS

COMPLETE WITH:

• Follow Rest• 15" 3-Jaw Chuck• Toolbox with Tools• Manual & Parts List

• Roller Jaw Steady Rest

• 4-Position Carriage Stop

• 4-Way Indexable Toolpost

• Coolant System with Full

Length Rear Splash Guard

• 2-Way Rapid Traverse on Apron

26" & 30" Swing Heavy-Duty Lathes with 4-1/2" Spindle Bore

FEATURES:• Center sleeve.• Threading dial.• Hardened & ground gears and splines.• Hardened & ground cross slideways & bedways.• Solid full-length cast iron base.• Precision rigid spindle with 3-point support.

Huge 4-1/2"Spindle Bore &

2-Way Rapid Traverse.

SPECIFICATIONS:Swing Over Bed ......................... 26" / 30"Bed Width ....................................... 15.75"Swing Over Cross Slide ........ 17.3"/ 21.3"Width of Gap w/Faceplate ................ 11.8"Distance Between Centers ....... 80" / 160"Spindle Speeds (12) ......... 10-1,000 RPMThread Cutting Range Inch (44) ................................ 2-56 TPI Metric (39) .......................... 0.5-14 mm Spindle Motor ...... 15 HP, 230/460V, 3 PH Spindle Bore ................................... 4-1/2" Spindle Nose .................................. D1-11 Tailstock Taper .................................. 5 MT Shipping Weight .. 6,900 lbs. / 11,800 lbs.

14" x 40" CNC Lathe

FEATURES:• Fagor 8055i CNC Control.• Programmable flood coolant.• 7.5 HP Servo drive spindle motor.• Induction hardened and ground ways.• Rigid FC30 castings with extra ribbing.• Extra large precision ground ballscrews.• Alloy steel gears that are hardened and ground.

SPECIFICATIONS:Swing Over Bed / Cross Slide .. 14" / 8-5/8" Distance Between Center ..................... 40" Width of Bed ........................................... 8" Spindle Nose / Bore ................. D1-4 / 1.5" Spindle Taper .................................... 5 MT Spindle Speeds .................. 50-3,000 RPM Cross Slide Travel (X Axis) .................... 8" Longitudinal Travel (Z Axis) .................. 33" Tailstock Quill Dia. / Travel ... 1-3/4" / 4-3/4"Voltage/Phase ......................... 230V, 3 PHShipping Weight ....................... 2,750 Lbs.

Model CSM-1440CNCPart No. 6-273-056

$42,15000FINANCE AS LOW AS $951.75/mo.CALL FOR DETAILS

FEATURES:• 6 HP spindle motor, 3 PH.• 16" swing x 40" between centers.• 16 spindle speeds, 45-1,800 RPM.• D1-6 camlock spindle with 3-point bearing support.• Large 2" spindle bore.• Shipping Weight: 3,400 lbs.

Model GRIP-1640GHPart No. 6-269-009-N5

$11,49500FINANCE AS LOW AS $264.39/mo.CALL FOR DETAILS

16" x 40" Precision Toolroom Lathe

13" x 40" Heavy-DutyPrecision Lathe

HEAVIEST HEAVY-DUTY

13" LATHE AVAILABLE!

Part No. 6-273-058-N5

$13,95000FINANCE AS LOW AS $320.85/mo.CALL FOR DETAILS

Complete with

DP-500 Digital ReadoutINSTALLED!Model

TRL-1340Part No. 6-273-058

$11,49500FINANCE AS LOW AS $264.39/mo.CALL FOR DETAILS

FEATURES:• 5 HP 2-speed drive motor, 230V, 3 PH.• ISO 9001 Certified Factory.• 16 spindle speeds, 50-2,570 RPM.• Shipping Weight: 2,440 lbs.

Complete with 7" 3-jaw chuck, chuck guard, steady rest and follow rest, 4-way indexable toolpost, coolant system with full length rear splash guard, halogen work light, toolbox with tools, manual & parts list.

Major Credit Cards Accepted: 27Subscribe @ KBCTools.com to Get Exclusive Email Offers.

MACHINERYCOMPLETE WITH:• Toolpost • 3 MT Tailstock• Work Light • Coolant System• Full Enclosure with Sliding Front Doors as well as Side & Rear Access• Front Access Slide Out Chip Tray• Manual & Parts List• Automatic Lube System

Part No. 6-269-008-N5

$7,24000FINANCE AS LOW AS $166.52/mo.CALL FOR DETAILS

Complete with

DP-500 Digital ReadoutINSTALLED!Model

GRIP-1340GPart No. 6-269-008

$5,51500FINANCE AS LOW AS $126.85/mo.CALL FOR DETAILS

13" x 40" Precision Toolroom LatheFEATURES:• 2 HP spindle motor, 1 PH.• 13" swing x 40" between centers.• 8 spindle speeds, 70-2,000 RPM.• D1-4 spindle mount, 1-1/2" bore.• Floor model with full-length rear guard.• All gear head, hardened and ground ways.

FEATURES:• 9 spindle speeds, 70-1,400 RPM.• 12" swing x 36" between centers.• D1-4 spindle mount, 1-1/2" bore.• All gear head, hardened and ground ways.

12" x 36" PrecisionToolroom Lathe

Model GRIP-1236EPart No. 6-660-010

$4,36500FINANCE AS LOW AS $100.40/mo.CALL FOR DETAILS

Complete with Floor Stand, Rear Splash Guard, 3 & 4 Jaw Chucks, Slotted Face Plate, Steady & Follow Rest.

High Precision Engine Lathes

FEATURES:• 7.3 HP main spindle motor, 12 speeds.• D1-8 camlock, 3.2" spindle bore.• Hardened and ground gears and bedways.• Solid one-piece cast iron base.• Inch dials & leadscrews.• Centralized lube system

in headstock.• Full-length safety foot brake.

Model KLS-1840G(18" x 40")

Complete with

DP-500 Digital ReadoutINSTALLED!

Model KLS-1860G(18" x 60")

Part No. 6-273-070-N5

$17,35500FINANCE AS LOW AS $391.88/mo.CALL FOR DETAILS

Part No. 6-273-071

$16,04500FINANCE AS LOW AS $362.30/mo.CALL FOR DETAILS

Part No. 6-273-071-N5

$18,36500FINANCE AS LOW AS $414.68/mo.CALL FOR DETAILS

Part No. 6-273-070

$15,15000FINANCE AS LOW AS $342.09/mo.CALL FOR DETAILS

Complete with 8" 3-jaw chuck, 10" 4-jaw chuck, steady rest and follow rest, 4-way toolpost, coolant system with full length rear splash guard, halogen work light, toolbox with tools, manual and parts list.

Neither razor-sharp chips nor brokentool bits will penetratethe Lexan® shield.

FEATURES:• Rib reinforced.• Light in weight.• Swings away easily.• Robust construction.

LATHEGUARD

Very Small Lathes 3.9" Up to 6" Dia. 6 to 12 6 Up to 8 Dia. 12 to 16 8 Up to 12 Dia. 16 to 20 10 Up to 16 Dia. 20 to 24 13 Up to 20 Dia.

Suggested Center Use With Part No. Reg. Lathe Size Height (A) Chucks 1-495- Net Price

$142.00169.00179.00195.00225.00

-12999-13060-13061-13062-13064

SALE!$127.80

152.10161.10175.50202.50

Latheguard Shield with Hardware & Mounting Bracket

Call: 1-800-521-1740 Fax: 1-800-322-4292 Web: KBCTools.com

MACHINERY

28

20-1/2" Floor Drill Press

®

ModelJDP-20MF

Part No. 6-200-039

$1,15390

FEATURES:• 20-1/2" swing.• 1" drilling capacity.• Supplied with 3/4" capacity drill chuck.• Spindle travel 4-5/8"/3MT spindle taper.• Max. spindle distance to table 29-1/8".• 12 spindle speeds: 150-4,200 RPM.• 1-1/2 HP, 1 PH, 115/230V motor; prewired 115V.• Shipping Weight: 375 lbs.

Model RD-1000Part No. 6-269-011

$11,49500FINANCE AS LOW AS $264.39/mo.CALL FOR DETAILS

SPECIFICATIONS:Distance, Spindleto Column ............................. 39.4"Spindle Taper ...................... 4 MTQuill Travel ......................... 9-7/8"Column Diameter ................... 10"Drilling Capacity ................. 1-1/2"Voltage/Phase ..... 230/460V, 3 PHOverall Height ......................... 93"Shipping Weight ........... 3,800 lbs.

Radial Drill Press With 39" Arm

Complete with Box Table,

Coolant & Work Light.

FEATURES:• 24" swing.• Power quill feed.• 4 MT spindle taper.• 8 speed geared head.• 1-1/2" drilling capacity.• Foot pedal operated instant reverse switch for tapping.• .75/1.5 HP Motor, 230V, 3 PH.• Shipping Weight: 800 lbs.

1-1/2" CapacityGeared Head Drill Press

10" x 54" CNC VerticalMilling MachineWith 3-Axis Acu-RiteG2 CNC Control

FEATURES:• 10" x 54" hardened and ground table with precision hardened ground ways.• 3 HP, 3 PH motor.• Acu-Rite G2 CNC control is easy to learn and simple to use.• Control features canned cycles for all regular milling and drilling jobs, just fill-in the blanks to complete a program.• Reliable mechanical V.S. Mill head delivers full torque over entire speed range.• Heavy-duty box ways on knee and column with extra-wide saddle for added rigidity.• Shipping Weight: 3,200 lbs.

Model TUM-3VS-G23Part No. 6-265-006-G23

$27,72000FINANCE AS LOW AS $625.92/mo.CALL FOR DETAILS

You won't find a better value on a CNC knee mill with top quality Acu-Rite G2 Control!

Model 600BPart No. 6-325-005

$5,09500FINANCE AS LOW AS $117.19/mo.CALL FOR DETAILS

FEATURES:• AC hi-torque spindle motor dual wound high/low.• Spiral type chip conveyor.• All AC digital Servo motors (X, Y + Z) CAT-40 taper spindle.• Extra-large roll out flood coolant system with automatic oil skimmer.• Full enclosure with extra wide opening and removable side doors.• Precision extra-side linear ways for smooth rapid traverse and high accuracy.• Halogen work light.• Oversized C-3 grade precision ground ball screws.• 10,000 RPM hi-performance spindle with spindle chiller.• Certified Meehanite castings with heavy-duty extra wide linear

guide ways and 6 carrier blocks.• Auto lubrication unit with metered check valves.• Direct coupled Servo motors for ultra precision.• Fanuc 0i-MD 3-axis CNC control with 8.4" color monitor with 2 gig flash drive and Ethernet.

SPECIFICATIONS: Table Travel ...................................... 24" Column Travel (Z-axis) .................... 18.1" Saddle Travel (Y-axis) ..................... 18.1" Rapid Travel (x, y + z) .......... 1,417"/IPM X, Y + Z Axis Feed Motor ......... 3.35 HP Spindle Center To Column .............. 19.7" Spindle Motor ........... 15 HP, 230V, 3 PH Spindle Speeds .................. 10,000 RPM Spindle Taper ............................. CAT-40 Spindle To Table ........................ 3.9"-22"Max. Tool Diameter ............................. 3"Max. Tool Length ............................. 5.9"Max. Tool Weight ..................... 12.1 lbs.Tool Change Time ..................... 3.7 sec.Tool Holder ................................. CAT-40Tool Storage Cap ............................... 16Table Size ................................. 18" x 28"Max Cutting Feed Rate .............. 590 IPMMax Work Load ......................... 660 lbs.Shipping Weight ...................... 8,540 lbs.

Model KVR-2418(24" x 18" x 18" X/Y/Z)

Part No. 6-273-100

$58,19500

FINANCE AS LOW AS $1,314.04/mo.CALL FOR DETAILS

COMPLETE WITH:• Automatic lubrication.• Automatic tool changer.• Programmable flood coolant system.• Full enclosure with front and side access.• Metal telescoping way covers.• Fanuc 0i-MD 3-Axis CNC Control.• Manual and parts list for mill.• Complete operation manual for Fanuc Control.

DON'T SEE THE MACHINE YOU NEED? Shop KBCTools.com or email us with your

specific needs at machinery@KBCTools.com.

Larger Vertical Machining Centers Available - More Information @ KBCTools.com

Vertical Machining Center

Includes 16 Tool Vertical ATC with

3.7 Sec. ToolChange Time

Major Credit Cards Accepted: 29Subscribe @ KBCTools.com to Get Exclusive Email Offers.

MACHINERY

SPECIFICATIONS: Table Size .............................................. 10" x 54"Longitudinal Travel Manual ........................... 32" with Power Feed ....................................... 28"Cross Travel ................................................... 16"Knee Travel .................................................... 16"Table to spindle min/max ......................... 16-5/8"Spindle to column at 90O .......................... 5" - 22"Spindle Speeds .......................... 70 - 4200 RPMSpindle Taper .................................................. R8Power Quill Feeds (per rev.) . .0017/.0032/.0053Quill Travel ........................................................ 5"Spindle Motor ................... 3 HP, 230/460V, 3 PHShipping Weight ................................... 3,500 lbs.

Heavy Duty Milling Machines

Turret Milling MachinesSPECIFICATIONS:Table Size ....................................... 9" x 49" Longitudinal Travel Manual Model ......... 35"Longitudinal Travel w/Power Feed ......... 31"Cross Travel / Knee Travel ............. 12" / 16"Table To Spindle min-max. ........... 0-18-3/4"Spindle To Column at 90° ...... 6-3/4"-18-3/4" Spindle Speeds ....... 70 - 4,200 RPM (Var.)*Spindle Taper ......................................... R-8Power Quill Feeds (per rev.) ................ .0017"/.0032"/.0053" Quill Travel ............................................... 5"Spindle Motor Step Pulley ......... 3 HP, 230/460V, 3 PHShipping Weight ........................... 2,700 lbs.

3HP Variable Speed Head!

Model TUM-3VS Part No. 6-265-006

$8,62000FINANCE AS LOW AS $198.26/mo.CALL FOR DETAILS

Part No. 6-265-006-N5

$10,11500FINANCE AS LOW AS $232.65/mo.CALL FOR DETAILS

Complete with

DP-500 2-AxisDigital Readout& Table FeedINSTALLED!

Model TUM-1VS Part No. 6-265-007

$7,70000FINANCE AS LOW AS $177.10/mo.CALL FOR DETAILS

Part No.6-265-007-N5

$9,19500FINANCE AS LOW AS $211.49/mo.CALL FOR DETAILS

Complete with

DP-500 2-AxisDigital Readout& Table FeedINSTALLED!

with Purchase of any KBC Mill / DRO Package

$202.95Value!

• 13 Pc. Collet Set (1-519-020)• 52 Pc. Clamp Kit (1-904-20402)• 10 Pc. End Mill Set (5-300T-050)

Jaws 55 TonPunch PressureIronworker5 HP, 230V, 3 PH

55 Ton hydraulic poweredpunching capacity with opentooling station, built-in stationsfor shearing plate and angle iron.

SPECIFICATIONS:Throat Depth ..................................................... 7Max. Capacity ................... 1-3/8" Dia. -1/2" PlateLargest Standard Punch/Die ......... 1-1/16"/1-1/4"Opt. Sized Table ........... 1-9/16" Punch/1-5/8" DieBar Shear Rounds/Squares ....................... 1-1/8"Flat Max. Thickness ............................... 3/4" x 4"Flat Max. Width .................... 1/2" x 12-3/8" x 14"Angle Shear Max. Size .................. 3" x 3" x 3/8"Shipping Weight .................................. 2,100 lbs.

Model 55TPart No. 6-700-215

$11,19900FINANCE AS LOW AS $257.58/mo.CALL FOR DETAILS

Model HBU48-16Part No. 6-700-040

$1,73000

SPECIFICATIONS: Capacity, Mild Steel ......... 16 GA.Bending Length ................ 48-1/4" Maximum Depth Of Body ......... 4" Maximum Lift Of Beam ...... 1-1/4" Front To Rear Beam Adjustment ............ 5/8" Minimum Reverse Bend ........ 1/4" Min. Flange In Cap. Material .... 1" Finger Widths ................ 2, 3 & 4" Shipping Weight .............. 580 lbs.

Universal Box & Pan Brake WITH STAND

F.O.B. FACTORY— TENNESSEE

16 Gauge Foot Squaring Metal Shear

SPECIFICATIONS: Max. Shearing Capacity, Mild Steel ......................... 16 GA.Max. Shearing Capacity, Stainless Steel ................. 20 GA.Maximum Cutting Length ......................................... 52-1/4"Back Gauge Range ........................................................ 30"Front Gauge Range ......................................................... 37"Floor Space, Gauges in Position ........................... 60" x 80"Overall Dimensions, Less Gauges, L x W x H .................................................... 61" x 36" x 42"Shipping Weight ................................................... 1,100 lbs.

Model 52Part No. 6-700-010

$2,99500

F.O.B. FACTORY— TENNESSEE

FREETOOLING

Call us for punches & dies and all the other available accessories for these versatile machines.

Call: 1-800-521-1740 Fax: 1-800-322-4292 Web: KBCTools.com

SHOP SUPPLIES

30

Clear Lensw/ Clear Frames

+ 1.5 diopterPart No. 1-711-BKH15Reg. Net Price $6.00

$510

+ 2.0 diopterPart No. 1-711-BKH20Reg. Net Price $6.00

$510

XO SkeletonHeadgear with Clear Face Shield

Part No. 1-711-104Reg. Net Price $26.30

$2236

FEATURES:• Ratchet action adjustment with terry cloth sweatband to provide both a precise fit and maximum comfort.• Face shield's curvature on sides and underneath chin provide optimum protection.• Headgear with integrated 1 pc. molded PC face shield providing better optical quality.• DURAMASS hardcoating to reduce scratching after repeated use.• Z87.1, AS/NZS 1337 compliant. Superior protection from liquid splashesand flying debris.

More information @ KBCTools.com

Solar Powered Auto Darkening Welding Helmet

FEATURES:• Durable lightweight material is corrosion resistant & flame retardant.• Returns to normal when welding stops with dark to clear adjustments available.• Variable shades from DIN9 to DIN13.• Extra-Large Viewing - 3.8" W x 2.17" H• Complies with - DIN, ISO, EN safety standards & ANSI Z87.1-2003 standards.• Utilizes high performance solar cells with 2 built-in 3V lithium batteries as power back-up.• Special turnover headband mechanism allows for greater comfort and reduces fatigue.• Automatically darkens in 1/30,000 of a second.• Ultra high performance filters protect against UV & IR.

Flaming SkullsPart No. 1-701-41266

Reg. Net Price $143.75

$9344

Leather Welder Gloves

Size: Extra-Large

Part No.1-700-004

$875

FEATURES:• Insulated.• Fleece lining.• Gauntlet cuff.• Made of gray B grade split shoulder cow leather.• 13" 1 pc. back, self hemmed, and have a full sock lining.

FEATURES:• Silicone free.• EN388 Score 412X.• Treated with Actifresh® to kill bacteria & promote freshness.• 15 gauge black nylon/Lycra shell.• Machine Washable: hang dry.• Do not use chlorine bleach or harsh detergents.• Comfortable and cool.• Bi-polymer palm and fingertips coated.

Ninja® X Gloves

Size: LargePart No. 1-711-N9674L

$405

Size: Extra-LargePart No. 1-711-N9674XL

$405

Unique shell and polymer combination incorporating the latest in hand protection technology. Ninja® Gloves offer dexterity, sense of touch, & protection.

Bear Kat¨

Part No. 1-711-BK110

$180

Clear Lens

NOTE: Magnetshave built-in SAFETYFACTOR of3.5X the rated load. Never lift more than the max. rated load.

AB

DE

HG

FC

AB

DE

HG

FC

Use the EZ-LIFT to move plate steel, block or round steel and iron material in your shop. Super-powerful "rare earth" neodymium iron boron magnet requires no electricity. It’s perfect for loading or unloading most workpieces including press molds, plastic molds, machined parts, etc.

FEATURES:• Eliminates dangerous straps and slings.• Fast, safe, efficient loading and unloading.• Beveled surface lifts round steel easily.• Faster than working with straps or slings.• Maintenance free lifting magnets never wear out.

EARTH-CHAINLifting Magnets

Maximum Maximum Rated Load Minimum Rated Load Maximum Weight Part No. Reg. Model A B C D E F G H (lbs.) Thickness (lbs.) Dia. x Length (lbs.) 7-520E- Net. Price

ELM-100 4.2" 3.3" 4.7" 4.9" 2.4" 2.8" 1.6" 1.2" 220 .59" 99 5.9" x 40" 5.5 ELM-300 7.1 6.1 6.1 7.3 3.6 3.7 2.0 1.6 660 .98 300 9.8 x 60 18.9

Plate Steel Round Steel

$291.40662.30

-100-300

$233.12529.84

SALE!

FEATURES:• Does not absorb water.• Sonic bonds provide added strength unlike the competitions unboned product.• The economical choice to soak up hydraulic oil, diesel fuel or any petroleum-based fluid.

Oil-Only White Pads

Pack of 100Part No. 1-835-714Reg. Net Price $61.00

$5185

AMI-100 17" X 19" DOUBLE WEIGHT

FEATURES:• Strong yet lightweight design.• Non-slip, soft temple material.• Single lens design with integral side shields for unobstructed view.• Exclusive Duramass® scratch resistant coating.• Rugged polycarbonate lens filters 99.9% of harmful UV rays.

Major Credit Cards Accepted: 31Subscribe @ KBCTools.com to Get Exclusive Email Offers.

SHOP SUPPLIES

Magnetic Mountfor Tube Lights

Model MB-6Part No.

1-541-MB6

$2230Vertical use only.Sold as one pair.

Non-ContactLaser Tachometer

Ideal for high-speed motors, engines, gearboxes, fans, compressors.

Supplied with a hard case.

FEATURES:• Auto ranging.• Laser precision.• Wide measuring range.• Range: 2.5-99,999 RPM• Jumbo 5 digit LCD display.• Memory: Min./Max./Last

INCLUDES:• User's Manual• (3) AAA Batteries• 1 Year Limited Warranty• Adhesive Reflective Tape

Model LT2234CPart No. 8-304-090Reg. Net Price $93.90

$7982

For Vertical Milling Machines

"THE BIB"Way Cover Set

FEATURES:• Protect ways from chips & oil.• Easily mounted with two screws.• Made of heavy .070 oil and chip-resistant Neoprene rubber.• Cut clean-up time.

Part No. 1-541-400Reg. NetPrice $59.95

$4796

INCLUDES:(36) 1/2"(36) 1"(36) 1-1/2"

(24) 2" (12) 3"

Part No.1-613-746

$7730

144 Pc. Chip Brush Assortment

Model 52611 (26-3/4" x 8-1/2" x 18")8 Adj. Drawer Dividers & A DropFront Panel for Added Security.Part No. 1-823-00094Reg. Net Price $568.13

$51132

Model 3611 (26-1/8" x 12-1/8" x 18-7/8")6 Adjustable Drawer Dividers.Part No. 1-823-10430Reg. Net Price $873.60

$78624

FEATURES:• 2-Piece welded I-beam drawers slides hold up to 90 lbs. per drawer.• Wool felt-lined drawers and top till.• High security tubular locking system.• Heavy-duty steel plated side handles.

11-Drawer26" Mechanics’ Chests

More information@ KBCTools.com

MODEL 52611

Pro Lathe Gage

FEATURES:• Durable anodized finish.• Ground steel shaft mounted on dual precision ball bearing.• Made from high strength aluminum.• Set turning, & facing tools on spindle

axis for optimum cutting conditions.• Precision glass vial level with 30' (2mm) sensitivity.

Part No. 1-811-02000Reg. Net Price $34.99

$2974

Hands Free

Design.

Brush Box Part No. Width Qty. 1-613-

Box Qty. Pricing

1/2"11-1/223

3636362412

$12.8515.9522.6515.9526.55

-740B-741B-742B-743B-745B

ONLY!

Chip Brushes

High volume/cost-effective brushes for wide range includingpainting, gluing, touch-up, chip removal, parts cleaning, and other industrial applications. Economy quality white bristle.

FEATURES:• 9 Watt• 120 Volt. • 1020 Lumens• Integrated ballast.• 9' grounded cord and plug.• Compact high-impact acrylic housing or borosilicate glass.• 2-3/4" diameter tubular housing with adjustable steel mounts.• Average rated LED life 50,000 hours.• SVT-O/O oil & water-resistant cord and plug - with liquid tight fittings to power outlet.

Size: 24 x 2-3/4 x 1/4Part No. 1-541-7749GLReg. Net Price $226.75

$19274

LED TubeMachine LightBorosilicate Glass

5 DrawerLocking TopService Cart

FEATURES:• 5" x 2" heavy-duty casters: 2 locking.• Chrome plated 16 gauge steel frame.• Full extension roller bearing drawer slides.• Durable powder coat finish.• EVA foam liners in all drawers for added protection.• Locking screwdriver / pry bar holder for added storage.

Model 8045BLPart No. 1-832-8045Reg. Net Price $481.11

$40894

SPECIFICATIONS:Load Capacity ... 500 lbs.Height ...................... 40"Length ...................... 27"Width ........................ 16"

Top Bin Depth ............. 3"Twin Drawer Depth ..... 2"Mid. Drawer 1 Depth ... 2"

Mid. Drawer 2 Depth ... 4"Bottom Drawer Depth .. 6"Bottom Shelf Depth ..... 3"

Quick & EasyAssembly

with a FoldableSide Work Shelf!

3-Drawer 27" Industrial RollerCabinet K1800

If you need large drawers for hand toolsand a spacious compartment for bulkyitems, this popular cabinet is for you!

Model 273X (27" x 18" x 35")With Ball Bearing Slides.Part No. 1-823-00604Reg. Net Price $683.62

$61526

FEATURES:• Fits any 26" chest, chest base or chest riser.• Comes with 5" x 2" sintered casters.• High security tubular locking system.• Swing-down panel conceals bottom compartment.

Brownwrinkle finish.

Call: 1-800-521-1740 Fax: 1-800-322-4292 Web: KBCTools.com

FLUIDS

32

IndustrialWay Oils

FEATURES:• 5 viscosity grades of lubricant.• Oils are non-corrosive & protect

against wear & stick-slip.• For use on machine ways and slideways.

20 WT GradePart No.1-820-720Reg. NetPrice $16.90

$1521

30 WT GradePart No.1-820-730Reg. NetPrice $16.90

$1521

Water Wizard®

SubmersibleUtility Pump

INCLUDES:• Garden hose adapter.• Removable inlet screen for easy cleaning.• Pumps down to 1/8".• 10' power cord.

FEATURES:• Viton shaft sal.• Epoxy coated cast aluminum housing.• 1/6 HP shaded pole motor with overload protecion.• Designed for continuous duty.

Model 5-MSPPart No. 1-440-505000Reg. Net Price $153.10

$13014

FEATURES:• Quick and easy mounting.• One-knob control - instantly starts up and shuts down the unit.• As little as 25 PSI air supply operates Aquaflo efficiently. Simply attach airline to standardthreaded fitting supplied with unit and drop supply line into any container with coolant in your shop. No special tank required.

Part No. 1-439-14014Reg. Net Price $42.50

$3613

AQUAFLOCoolant DispenserComes with bracket for fast attachment onto any 1/4" dia. fitting on your machine tool!

FEATURES:• Moisturizers protect skin from metalworking fluid’s chemistry and biology.• Formulated to easily remove shop grease, oils, and grime.• No more need to use gritty cleaners.• No need to use liquid glove

or other barrier creams.

UNCLE EARL’S Bar Soap for Machinists

$4.684.945.25

Part No. Description 1-122-

-005-006-007

UnscentedLemon ZestOrange Grove

ONLY!

One 3.4 oz. bar

lasts longer than

1 gallon ofliquid soap!

Applied to fasteners up to 3/4"in diameter before assembly. High lubrication for easy assembly. Excellent forpreventing rust and corrosion in extreme chemical environmental conditions. Localized heat and hand tools are required to separate parts. Solvents will not weaken the adhesive bond.

262™ ThreadlockerHigh Strength / Red / Permanent

10 ml BottlePart No.1-444-26221Reg. Net Price $16.95

$1441

50 ml BottlePart No.1-444-26231Reg. NetPrice $47.16

$4009

Layout Fluid FEATURES:• Toulene-free.• Layout fluids allow

scribing of sharp, clear, precise lines

reducing eyestrain.• They provide a thin coat that dries in minutes without cracking

or chipping revealing defects and pinholes

in a variety of surfaces.

STEEL BLUE

$10.4212.57

8 oz. Brush Cap Can12 oz. Aerosol

-001-002

$9.3811.31

Part No. Reg. Size 1-442- Net Price NOW!

Cutting Fluid withEP-XTRA®

An ozone-friendly, professional quality cutting fluid that delivers superior performance for any cutting operation on any metal. Proprietary additive, EP-XTRA®, provides asynergistic boost in performance.

NON-OZONEDEPLETING

For drilling, tapping, milling - All cuts on all metals!

Part No. Reg. Description 1-444- Net Price

$3.2510.3561.95

4 oz. Spout Top16 oz. Spout Top1 Gallon Can

-10004E-10016E-10128E

$2.768.80

52.66

SALE!

LIFETIMEOIL SUPPLY!

FEATURES:• Works best when used with Zebra Oxygenator.• Contains no formaldehyde or harmful chemicals.• Safer and more economical than biocides.• Eliminates sump odors caused by hydrogen sulfide bacterial emissions.

Odor Control Tablets

Part No. 1-122-020Reg. Net Price $40.56

$3245

A tablet per 25 gallons of coolant every week. Designed for small sumps, usually of 200 gallons or less. 15 tablets per tube.

Made with All Natural Ingredients!

Do away with Coolant Stench!

WD-40 protects metal from rust and corrosion andis great when it comes to cleaning grease, grime,& other marks from most surfaces. VOC COMPLIANT.

The Solution That WorksAs Hard As You Do!

"The Original"

5 BASIC FUNCTIONS:• Lubricates!• Displaces Moisture!• Protects - Metal surfaces

with corrosion-resistant ingredients.

• Penetrates - Loosens rust-to-metal bonds

and frees stuck, frozen or rusted metal parts.• Cleans - Dirt, grime,

grease, and adhesives!

16 oz. AerosalPart No.1-443-49008

$730ONLY!

1 GallonPart No.1-443-49011

$2590ONLY!

FEATURES:• Stable and odor free.• Transparent lubricoolant.• Doesn't attack paint, exotic metals, bearings, or pumps.• Not recommended for aluminum.

WATER SOLUBLE!

SAWZIT™

Pure SyntheticSawing Lubricoolant

1 Gallon BottlePart No.1-123-075

Reg. NetPrice $19.87

$1788

5 Gallon PailPart No. 1-123-080

Reg. NetPrice $92.90

$8361More Information @ KBCTools.com

Major Credit Cards Accepted: 33Subscribe @ KBCTools.com to Get Exclusive Email Offers.

HAND TOOLS

FEATURES:• Exact fit machine tips.• Molded ergonomic handles. • Hole in handle for hanging.• Hardened CVM tool steel blades.

3K Over-Drive ErgonomicSeries TORX® Screwdrivers

MADE IN GERMANY

Part No. Part No. Description 1-939- Description 1-939-

$3.603.753.753.953.954.204.40

-45504-45507-45508-45509-45510-45515-45520

T6 x 60 T7 x 60 T8 x 60 T9 x 60T10 x 80T15 x 80T20 x 100

$4.905.816.308.347.007.15

-45525-45527-45530-45540-45545-45550

T25 x 100 T27 x 115 T30 x 115 T40 x 130 T45 x 130 T50 x 130

ONLY! ONLY!

®

22 Pc. L-Wrench Sets In Bondhex Cases

Combo Inch/MetricBLX-13 (.050" thru 3/8") & BLX-9 (1.5mm thru 10mm)Part No. 1-927-20199Reg. Net Price $28.24

$1977

Ball End Hex L-Wrench Set

FEATURES:• Protanium™ has 20% more torque in

use for tighter screws. Also it provides longer wear, and has sharper

corners for extra grab.

Combo Inch/Metric#16537 (.050" thru 3/8") & #16599 (1.5mm thru 10mm)Part No. 1-927-20599Reg. Net Price $34.81

$2437

ProGuard™ Stubby Ball End L-Wrench SetFEATURES:• Eliminates the need to cut off the short arm.• Stubby short arm L-wrench for low clearance.• Precision cut tip for full engagement.• Smaller inside radius for tight spaces.• ProtaniumTM has 20% more torque in use for tighter screws. Also it provides longer wear, and has sharper corners for extra grab.

22 Pc. Combo Inch/Metric Set HLX13 (.050" thru 3/8") & HLX9M (1.5mm thru 10mm)Part No. 1-927-22199Reg. Net Price $17.54

$1228

FEATURES:• Precision machined for ease of use and superior fit.• ProGuard™ is a corrosion-resistant finish:

Environmentally safe, provides better tool grip, resists solvents, and is 5x more corrosion resistant than competitor finishes.• Chamfered tool tips eliminate burrs and help tools seat in screw head.• Sharp corners transfer more torque to the screw and reduce stripping.

Hex End L-Wrench Set

Letter & Figure Stamps

MACHINE MADE

9 PC. FIGURE SETS Part No. Reg. Size 1-8992- Net Price

1/16" 3/32 1/8 3/16 1/4 3/8 1/2

-004-006-008-012-016-024-032

$12.6512.6512.6515.8018.9027.6541.05

SALE!$10.75

10.7510.7513.4316.0723.5034.89

27 PC. LETTER SETS Part No. Reg. Size 1-8993- Net Price

1/16" 3/32 1/8 3/16 1/4 3/8 1/2

-004-006-008-012-016-024-032

SALE!$38.00

38.0038.0047.3556.6582.85

123.05

$32.3032.3032.3040.2548.1570.42

104.59

10 Pc. 3/8" Drive Crowfoot Wrench Sets

SAE SET INCLUDES:Sizes - 3/8", 7/16", 1/2", 9/16", 5/8",11/16", 3/4", 13/16", 7/8", 1"Part No. 1-909-2575Reg. Net Price $17.50

$1488

METRIC SET INCLUDES:Sizes - 10, 11, 13, 14, 15,17, 19, 21, 22, 24mmPart No. 1-909-2580Reg. Net Price $17.50

$1488

FEATURES:• Speeds up removal or installation of hard-to-reach fasteners.• Drop forged alloy steel.• Heat treated and chrome plated.• Works where a conventional socket can’t.

1/4" Drive Torque Range: 20-200"/lbs.Part No. 1-909-2432Reg. Net Price $52.20

$4176

3/8" Drive Torque Range: 120-960 inch/lbs.Part No. 1-909-2455Reg. Net Price $41.20

$3296

1/2" Drive Torque Range: 10-150 ft./lbs.Part No. 1-909-2460Reg. Net Price $47.35

$3788FEATURES:• Hear and feel wrench click when torque value is reached.• High-contrast dual range scale is easy to read in low light.• Reversible drive chrome vanadium steel ratchet head.• Durable all-steel construction with corrosion-resistant finish.• Knurled handle provides a sure, non-slip grip.

Click Torque Wrenches

®

Supplied withconversion table chart

and storage case.

LIFETIMEGUARANTEE!

The strongest impact socket line around. Sunex® impact sockets tackle the tough-est jobs with a chrome molybdenum alloy steel grip that won’t let go.

SET INCLUDES:• SAE Sizes - 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1-1/16", 1-1/8", 1-1/4" • Metric Sizes - 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 26, 27mm • Deep Flip Sizes - 3/4" x 13/16" & 19 x 21mm

FEATURES:• CR-MO alloy steel for long life.• Heavy molded storage tray.

29 Pc. 1/2" Drive Master Impact Socket Set

Part No.1-832-5153DD

Reg. NetPrice $154.65

$12372

6 Point - SAE & Metric

FULLY GUARANTEED!

Call: 1-800-521-1740 Fax: 1-800-322-4292 Web: KBCTools.com

POWER / AIR TOOLS

34

SPECIFICATIONS:Volts ................................................ 18VBattery ........................................ M18™Torque ........ 1,100 ft./lbs. and 700 ft./lbs.Length ................................................ 9"Weight .........................................7.2 lbs.

Part No. 1-828-2763-22Reg. Net Price $553.00

$47005

FEATURES:• Built-in LED light illuminates work surface.• POWERSTATE™ Brushless Motor: Outpowers competitors yet runs cooler with no wearable components.• 1/2" Anvil with friction ring for fast, easy socket changes.• REDLINK PLUS™ Intelligence: Allows the operator to choose between 2 fastening modes with Milwaukee’s proprietary DRIVE CONTROL™ feature. Mode 1 delivers up to 100 ft./lbs. of maximum fastening torque, and Mode 2 up to 700 ft./lbs. maximum fastening torque.• Superior Performance: Delivers up to 700 ft./lbs. of maximum fastening

torque, up to 1,100 ft./lbs. of nut-busting torque and up to 2X more runtime.• REDLITHIUM™ XC 5.0 Battery Pack: Provides superior pack construction, electronics and performance to deliver 2X more runtime.

KIT INCLUDES:• (1) M18™ & M12™ Multi-Voltage Charger• (1) M18 FUEL™ 1/2" High Torque Impact Wrench with Friction Ring (2763-20)• (2) M18™ REDLITHIUM™ XC 5.0 Extended Capacity Battery Pack

Suppliedwith a carryingcase.

M18 FUEL™ 1/2" HighTorque Impact Wrench With Friction Ring Kit

1/2" Impact Wrench

SPECIFICATIONS:Speed ............ 6,000 RPMAverage SCFM ........... 5.1Air Inlet ....................... 1/4"Bolt Capacity ............... 1/2"Drive Size ................... 1/2"Air Pressure ............90 PSITool Weight ..............5 lbs.

FEATURES:• Soft grip adds increased comfort during extended use.• Rocking dog type impact design good for DIY projects and general purpose applications like installing lug nuts & bolts.• Delivers 250 ft./lbs. of torque to quickly remove and install lug nuts and bolts.• Push button forward/reverse switch allows for one-handed directional changes.

INCLUDES:• 1/2" Air Impact Wrench• 1/4" NPT Inlet Plug

Model TL050201AVPart No. 6-399-200Reg. Net Price $58.55

$4684

SPECIFICATIONS:Speed ............................... 20,000 RPMAverage Air Consumption ........... 4 CFMOverall Length ............................ 5-1/2"Tool Weight ................................. 3/4 lb.

Rear Exhaust Angle Air Die Grinder

Part No.1-829-5772KTotal Value $40.55

$3250

FEATURES:• Angle head is a full bearing construction & supports air motor.• Independent power regulator and variable speed throttle.• Supplied with a 1/4" collet.

More information@ KBCTools.com

1/2" 20V MAX XRLithium-Ion Brushless Premium Drill/Driver Kit

FEATURES:• Heavy-duty with carbide inserts.• LED light provides increased visibility in dark or confined spaces.• Compact 7.9" size front-to-back length and fits tight areas.• 3 Load Speed: 0-450/0-1,300/0-2,000 RPM.• XR Li-Ion batteries (2) with fuel gauge provide 33% more capacity over standard packs.• DEWALT®-built high power, high efficiency brushless motor 650 UWO max power for superior drilling & fastening applications.

KIT INCLUDES:• Belt Hook• Fast Charger• 360o Side Handle• On-Board Bit Holder• DCD990 1/2" Drill/Driver

Part No. 1-826-DCD990M2Reg. Net Price $409.71

$34825Supplied with a kitbox.

Delivers 57% MORE run time than brushedmotors.

Heat Gun Kit

SPECIFICATIONS:Voltage ..................... 110V, 1 PH, 60 HzMotor ..................... 1,500W/ 12.5 AmpsDual Power ................. 1,000W, 1,500WTemp. Settings ............. 707oC, 1,004oCAir Speeds ..................... 13.2/19.5 CFM

FEATURES:• Dual power settings.• Powerful 1,500 watt motor.• Built-in thermal protector prevents overheating.• Ideal for paint, varnish, lacquer and label

removal, thawing or drying, forming and welding plastics, softening caulking and putty, heat shrinking plastics, soldering pipes or loosening joints and screws.

KIT INCLUDES:• Heat Gun• (4) Nozzles• 5 Pc. Paint Scraper Kit: - Flat Paint Scraper - Shave-Hook Scraper

Handle with Three Interchangeable Blades

Part No.6-125-155

$2990

Supplied with a carrying case.

Model 290Part No. 1-829-290

$2430

Engraver

FEATURES:• Engraves metal, glass, wood, plastic, and ceramics.• Holding area allows for extended use.• Soft grip adds extra comfort and control.

INCLUDES:• Engraver Tool• Carbide Point (9924)• Letter/Number Template

SPECIFICATIONS:Voltage .................. 115 AC, 60 HzAmps ........................................... 0.2Stroke per Minute ................. 7,200 Part No.

1-829-1621

1/8"Collet

FREE

BIG RED 6" Grinder

fullYear

Warranty3

FEATURES:• Furnished with non-exhaust type wheel guards & eye shield.• Base mounted on/off switch and 8' cord with plug.• Stamp steel tool rests.• Rubber mounting feet help minimize vibration.

SPECIFICATIONS:Speed .................................. 3,600 RPMMotor .......... 1/3 HP, 115V, 1 PH, 60 HZ

Part No. 2-010-612RReg. Net Price $408.00

$34680

INCLUDES (1 Each):• 36 Grit Wheel (6" x 3/4" x 1/2")• 60 Grit Wheel (6" x 3/4" x 1/2")

Identify and personalize your valuables!

Use for decorative engraving.

Major Credit Cards Accepted: 35Subscribe @ KBCTools.com to Get Exclusive Email Offers.

S A L ELIMITED QUANTITIES

ADCLN - Style L• Negative 5° end or side cutting

edge angle for negative 80° diamond CNMG inserts.

ADDJN - Style J• 3° side cutting edge

angle for negative 55° diamond DNMG inserts.

R/L Jet-StreamTM

Indexable Toolholders

(2) 1/8 NPT

Right Hand Shown, Left Hand Opposite

ADDJN(2) 1/8 NPT

Right Hand Shown, Left Hand Opposite

ADCLN(2) 1/8 NPT

Right Hand Shown, Left Hand Opposite

ADTJN

ADTJN - Style J• 3° side cutting edge

angle for negative triangle TNMG inserts.

MTVO-A - Style V• O.D. threading and shallow

grooving.• For use with triangular 60O V

TNMA threading style inserts.

R/L Indexable Toolholders

RIGHT HAND SHOWNLEFT HAND OPPOSITE

27o

F

C

A

B B

E

3o

7o NEGRAKE7

o N

EG

MTJN

RIGHT HAND SHOWNLEFT HAND OPPOSITE

B

E

C

AF

B

32o

3o

7o NEG

7o N

EG

RAKE

MDJN

B B

AF

VE

G

C

MTVO-CN

CE

G

F

V

B

A

B

MTVO-A

MTVO-CN - Style V• O.D. threading and shallow

grooving.• For use with triangular 60O V

TNMC threading style inserts.

MTJN - Style J• 3O side cutting edge angle. • For use with negative triangle TNMG inserts.

MDJN - Style J• 3O side cutting edge angle.• For use with negative 55O

diamond DNMG inserts.

SI-MWLN R/L Indexable Boring Bar

Style L• Negative 5O side and end cutting edge angle. • For use with 80O negative trigon WNMG inserts.

F

B

Ko

7o

7o NEG

Ko

RAKE

5o

C

D

RIGHT HAND SHOWN LEFT HAND OPPOSITE.

Vibratory Deburring& Finishing Machines

FEATURES:• Flow thru drain.• Clean, quiet, fast.• Deburr, polish, clean.• Adjustable amplitude.• 1600 cycles per minute.

A

BC

STARTER KIT INCLUDES:Includes 50 lbs. 5/8 x 1/4 Angle Cut Tri-Star Ceramic, 1 Quart Anti-Rust Solution & 1 Quart Soap Solution. Shipping Weight: 56 lbs.

Starter KitPart No. 2-012-002Reg. NetPrice $197.40

$16779

DEBURRING MACHINE

Working Weight Part No. Reg. Model Capacity (lbs.) A B C 2-012- Net Price

$910.00150S 10 QT 32 15 6 5-3/4 -150

Bowl Dimensions

$773.50SALE!

FEATURES:• The rotating spindle is extended right through the tapered shank.• Two adjustable needle-roller bearings carry all radial loads.• A heavy duty ball thrust bearing takes all axial thrust.• Complete protection of bearings provided by the built-in oil-seal, which also prevents loss of lubricant.• Made in Czech Republic.

7-In-1 Heavy-DutyInterchangeable Live Center Sets

3 .590" .984" 4 .784 1.181 5 .984 1.496 6 1.181 1.811

$900.601093.951396.991725.00

Morse Part No. Reg. Taper d I 1-499- Net Price

-300-400-500-600

$675.45929.86977.89

1035.00

SALE!

R.H. 1-285R- Min. WNMG Tool Bore Insert Part Reg. Reg. Style B C D F KO Series No. Net Price Net PriceS24U-MWLNR/L-4 4321.78" 14" 1-1/2" 11O $298.35.890" $298.35-052 $223.76$223.76

L.H. 1-285L-

SALE! SALE!

Shank Shank Tool Width Height OAL Insert Part Reg. Reg. Style A B C E F Series No. Net Price Net Price

R.H. 1-285R-

ADCLNR/L 20-4DADDJNR/L-16-4DADTJNR/L-16-4D

-702-711-731

1-1/4"11

1-1/4"11

6"66

1-1/2"1-1/42

CNMG 432DNMG 432TNMG 432

1-1/4"1-1/21-1/4

$185.08186.58

—

—186.58174.15

L.H. 1-285L-

SALE! SALE!$138.81

139.94—

—139.94130.61

Max. Shank Shank Groove Tool Height Width OAL Depth Insert Part Reg. Reg. Style A B C E F G V Series No. Net Price Net Price

R.H. 1-285R-

MTVOR/L 16-3D-AMTVOR/L 16-3D-CNMDJNR/L 20-4DMDJNR/L 24-4EMTJNR/L 16-3D

-144-144C-006-007-009

1"11-1/41-1/21

1"11-1/41-1/21

6" 6676

1-1/4" 1-1/41-1/221-1/4

TNMA 322TNMC 322DNMG 432DNMG 432TNMG 332

1.155" 1.1551-1/41-1/41

.150".150———

1/4" 1/4———

$93.8293.82

124.86142.75

75.57

L.H. 1-285L-

$70.3770.3793.65

107.0656.68

$93.8293.82

124.86142.75

75.57

$70.3770.3793.65

107.0656.68

SALE! SALE!

Over 860 Pages ofour Best ProductsPLUS thousands of New Items added!

KBC Volume 52Master Catalog

To Request a Copy Call 1-800-521-1740 or go to KBCTools.com

GET ONETODAY!

6465 18 Mile RoadSterling Heights, MI 48314Local Calls ....... (586) 731-3600Fax Main Line .. (586) 731-7464

4 LOCATIONS TO SERVE YOU!Showroom Hours: Monday to Friday 8am - 5pm

Detroit6300 18 Mile Rd.Sterling Heights, MI 48314Local Calls ....... (586) 979-0500Fax Main Line .. (586) 979-4292

U.S.A.

HEADQUARTE

RS

Hours: Monday to Friday 7am - 5pm

Chicago910 Busse RoadElk Grove Village, IL 60007Local Calls ....... (847) 758-4400Fax Main Line .. (847) 758-4110

Los Angeles1021 S. Placentia Ave.Fullerton, CA 92831Local Calls ....... (714) 278-0500Fax Main Line .. (714) 278-0505

ATTN: PURCHASING DEPARTMENTATTN: PURCHASING DEPARTMENT

PRST. STD.U.S. POSTAGE

PAIDKBC TOOLS

6300 18 MILE ROADSTERLING HEIGHTS, MI 48314

PHONE HOURS: Mon-Fri. 8am - 8pm, EST

Machinery Division

Fast, Easy Product Search and Filtering, Exclusive Web Offers, Mobile Friendly, Real-time Inventory, Live Chat & More!

Jobbers DrillsHIGH SPEED STEEL118° POINT RIGHT HAND

Drills are designed to perform in a wide variety of normal conditions and in a broad range of materials in both machine and portable drilling.FRACTIONAL SIZES

1/16" 1-7/8" 5/64 2 3/32 2-1/4 7/64 2-5/8 1/8 2-3/4 9/64 2-7/8 5/32 3-1/8 11/64 3-1/4 3/16 3-1/2 13/64 3-5/8 7/32 3-3/4 15/64 3-7/8 1/4 4 17/64 4-1/8 9/32 4-1/4 19/64 4-3/8 5/16 4-1/2 21/64 4-5/8 11/32 4-3/4 23/64 4-7/8 3/8 5 25/64 5-1/8 13/32 5-1/4 27/64 5-3/8 7/16 5-1/2 29/64 5-5/8 15/32 5-3/4 31/64 5-7/8 1/2 6

$1.331.351.351.421.381.521.561.701.892.082.292.502.633.193.293.834.224.695.205.885.996.867.047.798.199.179.66

10.2410.17

-004-005-006-007-008-009-010-011-012-013-014-015-016-017-018-019-020-021-022-023-024-025-026-027-028-029-030-031-032

Part No. Reg. Size OAL 1-001A- Net Price

$1.061.081.081.141.101.221.331.361.511.661.832.002.102.552.633.063.383.754.164.704.795.495.636.236.557.347.738.198.14

SALE!

FEATURES:• Completely portable.• 4’ nylon braided coolant line.• Output from each nozzle is regulated

by a single knob on the control.• Mist spray may be turned on or off

instantly to coordinate with the cutting cycle, and the spray mix

made lean or rich as needed.• Tank Capacity: 1 Gallon• No. of Outlets: 1

General Purpose Models w/ Stainless Steel Tanks

$167.00235.00

Nozzle Part No. Reg. Length 1-437- Net Price 6" Brass12" Flexline

-100N-100NF12

$141.95199.75

SALE!

For Mist and Flood Cooling. Highly recommended where tougher machining conditions require greater lubricity, where material is very abrasive, or tool pressure is exceptionally great. 1 gallon makes 33 gallons.

For Tougher Service Formula 77 Mist

or Flood Coolant

1 Gallon in plastic bottlePart No. 1-437-771Reg. Net Price $44.00

$3740

KBCTools.comWEB::

1-800-521-1740PHONE:

1-800-322-4292FAX: