MosaicTM Programme mechanisms

MosaicTM Programme mechanismsswitches

0 792 010 770 15 0 792 11 0 770 62

Pack Cat.Nos Switches 16 AX - 250 V±Automatic terminals2-pole one-way switch

10 0 770 50 White - 2 modules

Illuminated 2-pole one-way switch10 0 770 52 White - 2 modules

To be equipped with lights Cat.Nos 6 650 90 or 91

Switches 20 AX - 250 V±Screw terminals

Two-way switches10 0 770 60 White - 1 module


Illuminated two-way switchesTo be equipped with light Cat.No 0 676 64 (p. 877)

10 0 770 62 White - 1 module


2-pole two-way switch10 0 770 63 White - 2 modules

2-pole illuminated two-way switchTo be equipped with light Cat.No 0 676 64 (p. 877)


Accessories10 6 650 90 For illuminated function of

Cat.No 0 770 52

10 6 650 91 For indicator function ofCat.No 0 770 52

1: Contains a silver compound to prevent the growth of bacteria on the surface of the plate

Pack Cat.Nos Switches 10 AX - 250 V±One-way switchesAutomatic terminals

10 0 770 00 White - 1 module


Energy saving switchesAutomatic terminalsAre installed and work like conventional 2-way switches. In addition, they automatically switch off after 10 mins if no movement is detected by the built-in IR detection cellDetection fi eld: 160°. Detection range: 8 mCompatible with any lamp:- 12-150 W: incandescent and 230 V halogen lamps- 12-150 VA: lamps with electronic or ferromagneticballast- 8-30 W (or 650 mA): LED and CFLAll types of lamps can be mixed on the same circuitIdeal for rooms where the light may be left switchedon needlessly (child’s bedroom, box room)

1 0 770 15 White1 0 792 15 Alu

Two-way switchesAutomatic terminals

10 0 770 01 White - 1 module10 0 792 01 Alu - 1 module10 0 787 10 White antimicrobial(1) - 1 module10 0 770 11 White - 2 modules10 0 792 11 Alu - 2 modules10 0 787 11 White antimicrobial(1) - 2 modules

Illuminated two-way switchesAutomatic terminalsTo be equipped with lights (p. 877)

10 0 770 02 White - 1 module10 0 792 02 Alu - 1 module10 0 770 12 White - 2 modules10 0 792 12 Alu - 2 modules10 0 787 12 White antimicrobial(1) - 2 modules

Intermediate switchesScrew terminals

10 0 770 21 White - 2 modules10 0 792 21 Alu - 2 modules

6 650 91

MosaicTM Programme mechanismspushbuttons and accessories

Selection chart for boxes, supports and plates p. 900-901

Pack Cat.Nos. Pushbuttons 6 A - 250 V±Automatic terminals, no tool required

One-way pushbuttons10 0 770 30 White - 1 module10 0 792 30 Alu - 1 module10 0 787 14 White antimicrobial(1) - 1 module

One-way pushbuttons10 0 770 40 White - 2 modules10 0 792 40 Alu - 2 modules10 0 787 15 White antimicrobial(1) - 2 modules

Illuminated one-way pushbuttonsTo be equipped with lights (see opposite)Supplied with 2 free terminals

10 0 770 33 White - 1 module

Two-way pushbuttons10 0 770 31 White - 1 module


Illuminated two-way pushbuttonsTo be equipped with lights (see opposite)

10 0 770 32 White - 1 module10 0 792 32 Alu - 1 module10 0 770 42 White - 2 modules10 0 792 42 Alu - 2 modules10 0 787 16 White antimicrobial(1) - 2 modules

Illuminated two-way push-button with free terminal

10 0 770 34 White - 1 module

Two-way pushbutton with label-holder10 0 770 43 White antimicrobial(1) - 2 modules

Pack Cat.Nos. Accessories

White

Locator lightsFor illuminated function of Cat.Nos0 770 02/12, 0 792 02/12, 0 770 32/42 and 0 792 32/42Connected by direct mounting

10 0 676 86 230 V. Consumption 0.15 mA

10 0 676 87 12 V – 24 V – 48 VAC and DC consumption: 12 V :0.4 mA ; 24 V : 1.2 mA ; 48 V : 3.7 mA

Indicator lightsFor indicator function of two-way switchesCat.Nos 0 770 02/12, 0 792 02/12 and0 770 33/34

10 0 676 88 Distributed phase wiring monitor light230 V. Consumption 3 mA

10 0 676 85 Existing wiring monitor light230 V. Consumption 3 mA

10 0 676 89 12-24-48 V

Light for socket outlets and 20 AX switchesFor indicator or locator function ofCat.Nos 0 770 62, 0 770 64, 0 770 94

10 0 676 64 230 VConsumption 2.4 mATo be wired

Green light for socket outlets10 0 676 63 230 V

Consumption 2.4 mATo be wired


0 770 430 770 30 0 770 33 0 676 86

MosaicTM Programme mechanismsradio switches

MosaicTM Programme mechanismspull-cord switches and ventilation control

Pack Cat.Nos Pull-cord switchesFast connection via automatic terminals, no tool required

Two-way switch, 10 AX - 2 modulesFor controlling 230 V± incandescent and halogenlamps up to 2300 W

1 0 770 14 WhiteWith cord length 1.5 m

Two-way pushbutton - 6 A, with pull cord2 modules

1 0 770 44 WhiteWith cord length 1.5 m

Ventilation controlFast connection via automatic terminals,no tool required

Two-way switch

For direct control of controlled mechanical ventilation10 AX - 250 V±

1 0 770 27 White antimicrobial(1)


Pack Cat.Nos Centralized control unit - wireless transmitter switchesSurface-mounting or within a fl ush-mounting boxNo wiring requiredPowered by 3V CR 2032 lithium batteries, supplied

1 0 746 85 White - single switchEnables you:- to control a group of Radio receiverswitches- to do a two-way switch without wiring

1 0 746 86 White - 2-gang switchEnables you to control two radio receiverswitches or two groups of Radioreceiver switches

Dimmer1 0 746 89 White

To dim one radio dimmer receiver or a group of radio dimmer receivers

Dimmer receiver switch without neutral -1 circuit, 8-300 W

1 0 746 87 WhiteWith status LED (On/Off)Enables you to control LED, compact fl uorescent or halogen lamps as well aselectronic or ferromagnetic transformers

Individual control unit wired (230 V± ) to thecontrolled loadIntegrated radio receiverCan be controlled by other Radio controls (dimming, 4-scenario, IR sensor…)Power supply: 230 V±2 modules

ON/OFF lighting module1 0 883 06 Can be connected as close as possible to

the loadAvoids the need to pull a cable between theload and its control unit

Its receiver function allows it to be controlled by1-gang or 2-gang wireless radio control units(transmitters), 4-scenario controls, IR detector,remote controlsPower supply: 230 VA, phase + neutral



All two-way switches with indicator have a terminal for neutral connection and must be equipped with an indicator

0 770 14 0 770 27 0 746 85 0 746 89 0 883 06

MosaicTM Programme mechanismsskirting light with motion sensor

MosaicTM Programme mechanismssensitive switch and touch switches

0 787 13

Pack Cat.Nos Sensitive switch 10 AX

For controlling light sources by simply passing the hand close to the switch (maximum loads, see p. 882)Particularly suitable for applications in medical environments Up to 5 sensitive switches can be combined to control the same lighting circuit Supplied with LED indicator light

1 0 766 66 White - antimicrobial(1)

Touch switchesFor controlling light sources and other functions by touching the switchParticularly suitable for applications in medical environments Marking possible with label (supplied) to be put under the cover plate 2 modules

Switch with neutralEquipped with indicator light (LED)For controlling lamps (maximum loads, see p. 882):- Up to 1000 W for 230 VA incandescent or halogen- Up to 500 VA for ELV halogen with ferromagnetic orelectronic transformer


NO/NC contact pushbutton – not suppliedEquipped with LED indicator light and feedback indicator to be wired. Particularly suitable for controlling door releases and locks 12/24 VSupply: 12 V=Consumption: 0.2 WContact: 12 or 24 V=, 5 A max.



0 766 66

Selection chart for boxes, supports and plates p. 900-901 Pack Cat.Nos Skirting light with motion sensor

Mechanism equipped with an infrared detection cell and a LED beamTo be installed close to the floor (next to a socket, for example)When someone passes, the mechanism detects movement and switches the light onIdeal to illuminate a corridor at night without dazzling people, or to highlight possible dangerEquipped with an audible signal that can be deactivated (when product is used for lighting) or not (so as to indicate danger)

1 0 785 11 White

0 785 11

MosaicTM Programme mechanismsmotion and presence sensors

0 784 59


Pack Cat.Nos. 2-wire motion sensors, without neutral

IR detectionAccepted power by lamp type:- LEDs: 3 to 100 W- compact fluorescent: 3 to 100 W- LEDs, CFLs, Halogen, fluo tubes with ferromagneticor electronic transformer: 3 to 250 VA- halogen 230 V, incandescent: 3 to 250 WFor LED and compact fluorescent lampsIf several sensors are installed on the same circuit, theminimum load changes: refer to the technical sheetPossibility to install up to 3 sensors in parallelTime delay setting from 10 s to 10 minLight level threshold setting from 5 lux to 1275 luxStandby consumption : 0.2 W

Sensor without override1 0 784 58 White

1 0 792 47 Alu

Sensor with override1 0 784 59 White

Front override button to select “Always ON”, “Automatic” or “Always OFF” mode

2-wire motion sensor for time-lag switch,without neutralTo be associated with a time-lag switch (p. 93)Allows automatic turning on/off in a hall, staircase...Replaces a push-buttonThe time delay setting must be the same as that of the time-lag switch

1 0 784 57 White

3-wire motion sensors, with neutralIR detection - 2000 WChecks the light level continuously and not only at the time of detectionAccepted power by lamp type :- LEDs: 0 to 250 W- Compact fluorescent: 0 to 250 W- LEDs, CFLs, Halogen, fluo tubes with ferromagneticor electronic transformer: 0 to 1000 VA- Halogen 230 V, incandescent: 0 to 2000 WUp to 10 sensors can be connected in parallelAdditional remote manual control possible with pushbuttonTime delay setting from 5s to 30 minLight level threshold setting from 5 lux to 1275 luxStandby consumption : 0.2 W

1 0 784 54 White

1 0 792 58 Alu

0 784 57 0 784 54 0 401 490 784 52 + 0 788 02 (plate)

Pack Cat.Nos 3-wire motion sensors, with neutral(continued)

IR detection - 400 WAccepted power by lamp type:- LEDs: 0 to 50 W- Compact fluorescent: 0 to 50 W- LEDs, CFLs, Halogen with ferromagnetic orelectronic transformer: 0 to 200 VA- fluo tubes with ferromagnetic or electronictransformer: 0 to 150 VA- Halogen 230 V, incandescent: 0 to 400 WOnly one detector per circuitNo additional remote manual control with push buttonTime delay setting from 10 s to 10 minLight level threshold setting from 5 lux to 1275 luxStandby consumption: 0.55 W

1 0 784 50 White

3-wire presence sensor, with neutral

Infrared and ultrasonic double technologyAllows a precise presence detectionChecks the light level continuously and not only at the time of detectionPropose a special mode: manual switching on with integrated pushbutton, automatic switching offAccepted power by lamp type:- LEDs: 0 to 250 W- Compact fluorescent: 0 to 250 W- LEDs, CFLs, Halogen, fluo tubes with ferromagnetic or electronic transformer: 0 to 1000 VA- Halogen 230 V, incandescent: 0 to 2000 WUp to 10 sensors can be connected in parallel Additional remote manual control possible with push buttonTime delay setting from 5 s to 30 min Light level threshold setting from 5 lux to 1275 lux Standby consumption : 0.4 W

1 0 784 52 White

Active Power Compensator1 0 401 49 Allows 2-wire electronic switches without

neutral to be compatible with all loads (LED, fluocompact…)

All sensors are compatible with any lamp - Detection field: 120°. Detection range: 8 m. Recommended installation height: 1.20 m Integrated self-protection against overloads and short-circuits. 2 modules

NL 1

,5 m

m2

0 401 49

MosaicTM Programme mechanismsdimming control

0 792 07

Pack Cat.Nos Dimmer switches 110-230 V± - 50 HzCan be remotely controlled via non-illuminated pushbuttons (p. 877), with each pushbutton able to perform the dimming function When switched on, lighten at the level set before last switched off For installation in flush-mounting box depth 40 mm min

Universal dimmer without neutral, 2-wire

2 modules

For all types of lamps:- dimmable LEDs: 5 W to 75 W (10 lamps max.)- dimmable compact fluorescent lamps: 5 W to 75 W(10 lamps max.)- halogen with ferromagnetic or electronictransformer: 3 VA to 400 VA- fluorescent tube - ballast: 3 VA to 200 VA- halogen and incandescent 230 V: 3 W to 400 WWhen switched on, gradually (2 seconds) lights upat the level set before last switch-offFunctionning:- dimming mode- pre-set level mode (0%, 33%, 66%, 100%)- nightlight mode: dimming down of the lamp for1 hour

11

0 784 070 792 07

White Alu

Leading edge dimmer, without neutralFor the following types of lamps:- halogen 230 V and incandescent: 40 W to 600 W- halogen with ferromagnetic or electronic type Ltransformer: 40 VA to 600 VA

1 0 784 05 White

1000 W dimmer, with neutralFor the following types of lamps:- halogen with ferromagnetic or electronictransformer: 100 VA to 1000 VA- halogen and incandescent 230 V: 100 W to 1000 WWhen switched on, gradually (2 seconds) lights upat the level set before last switch-off

5 modules 5 LEDs displaying the current level of the circuit1 0 784 02 White

0 784 02

Pack Cat.Nos Dimmer switch with neutral, for 0-10 V ballast

2 modules For lamps with 0-10 V ballast, 600 VA1 0 784 04 White

2 modules Auxiliary control unit for DIN dimmer1 0 784 10 Remote control dimming peripheral for local

control of a remote control dimmer, with the same easy operation as a conventional dimmerA power supply Cat.No 0 036 80 is required

for controlling DIN-rail modular remote control dimmers Cat.Nos 0 036 60/71 (p. 94)

0 784 04 0 784 10

MosaicTM Programme mechanisms maximum loads

n Switches and dimmers maximum loads at 230 VA

Cat.Nos

Incandescentor halogen

lamps

+

ELV halogen or compact fluorescent

withferromagnetictransformer

+ELV halogenor compact fluorescent

or LEDwith

electronictransformer

+

+

Fluorescenttube with

electronic or ferromagnetic transformer

LED or fluorescent

load with 0-10 VA

electronicballast

Compactfluorescent

and dimmablecompact

fluorescentbulb

LED and dimmable

LEDbulb Motor

Backupheatingsystem Contactor

Energy saving switches

0 770 15 0 792 15

12 W150 W

12 VA 150 VA

12 VA150 VA

12 VA 100 VA - 12 W

60 W50 mA

650 mA12 W 60 W

50 mA 650 mA - - -

Radio dimmer

0 746 87 7 W300 W

35 VA300 VA

10 VA300 VA

35 VA300 VA -

9 W(2)

60 W (10 lamps maxi)

5 W(3)


- - -

Sensitive switches

0 766 66 1000 W 500 VA 500 VA 500 VA - 500 VA - 100 VA 1000 W I max ≤ 2A

Dimmer switches

0 784 02 100 W1000 W

100 VA1000 VA

100 VA1000 VA - - - - - - -

0 784 04 - - - - 40 VA600 VA - - - - -

0 784 05 40 W600 W

40 VA600 VA - - - - - - - -

0 784 070 792 07

3 W400 W

3 VA400 VA

3 VA400 VA

3 VA200 VA -

3 W(2)


3 W(3)


- - -

Switch sensors

0 784 50 400 W 200 VA 200 VA 150 VA - 50 W 50 W - - -

0 784 580 792 47 0 784 59

3 W 250 W

3 VA 250 VA

3 VA 250 VA

3 VA 250 VA - 3 W(4)

100 W3 W(4)

100 W - - -

0 784 520 784 540 792 58

2000 W 1000 VA 1000 VA 10 x (2 x 36 W) - 250 VA 500 VA - 2000 W l max ≤ 2 A

Timer switch

0 784 20 1000 W 400 VA 400 VA - - - - 250 VA 1840 W -

Programmable time switch

0 784 25 1200 W 1800 VA 2300 VA - - 100 VA(1) - 1800 VA - -

Touch switch

0 787 09 1000 W 500 VA 500 VA 500 VA - 500 VA 500 VA 100 VA 1000 W l max ≤ 2 A

1: Does not work with dimmable compact fluorescent bulb2: Works with dimmable CFL3: Works with dimmable LED bulbs4: When several sensors on the same circuit, the minimum load increases

or

MosaicTM Programme mechanismstimer switch, programmable time switch

MosaicTM Programmecolour-lighting management

0 784 03 0 488 60

Pack Cat.Nos Colour-lighting dimmers

Allow the user to create lighting ambiancesFor (LEDs) DALI ballasts and driversFor controlling max. 21 RGB (Red/Green/Blue) luminaires Confi guration via “learn” button Ideal for show-rooms, shops, restaurants, hotels, beauty salons...Work with power supply Cat.No 0 035 15White

Dimmer - 1 area1 0 784 03 Allows manual change of colours

Touch dimmer - 1 to 4 areas1 0 488 60 Allows the creation of up to 4 lighting

ambiances in up to 4 areas Multicolour dimmingLight adjustments:- colours: via touch chromatic circle- intensity: via bargraph

Supplied with supportFor installation in 2-module fl ush-mounting box depth 50 mm

DALI power supplies

Work with colour-lighting dimmers Cat.Nos 0 784 03 and 0 488 60230 V - 200 mA - 16 V

1 0 035 13 2 modules DIN1 0 035 15 For installation in false ceiling

0 784 20 0 784 25

Pack Cat.Nos Timer switch

Interference suppression conforming to standard EN 55022For timer control of a circuit with the following loads: - 1000 W 230 V± incandescent and halogen- 1840 W resistive (heating)- 400 VA fluorescent and ELV halogenIt is possible to install a number of timer switches inparallel on the same circuit2-wire installation in 40 mm min. boxHas an integrated LED. 2 modules

1 0 784 20 White

Programmable time switch20 hours working reserveCapacity: 8 weekly programmesTemporary or permanent override1 output - 6 A - 250 V± cos ø = 11 changeover contactUsed to programme the control of a circuit with the following loads:- 1200 W 230 V± incandescent and halogen- 1800 VA fluorescent Ø26 or 38 mm and ELVhalogen with ferromagnetic or electronic transformer- 1800 W motors (ventilation only)- 3600 W resistive (heating only)

1 0 784 25 White

MosaicTM Programme mechanismsroller blind controls

MosaicTM Programme mechanismsheating, temperature regulation

0 767 20 0 767 21

Pack Cat.Nos Room thermostats

Power supply 230 V± - 50/60 HzSuitable for regulation of ceiling panel heating and direct floor heating

Electronic

2 modules

Alternatively for cooling systemsAdjustment range from 10 °C to 30 °CFrost protection 7 °C Adjustment accuracy +/- 0.5 °C (category B) One output by non-powered contact Pushbutton on front face for selecting the operating mode (off, switch off when temperature falls or rises) Adjustable brightness of LEDs• LV useBreaking capacity:- 8 A / 250 V± - resistive circuit- 2 A / 250 V± - inductive circuit• ELV useBreaking capacity from 1 mA min. to 500 mA max.12 to 48 V± / 12 to 24 V=

1 0 767 20 White

Electronic with weekly programming

5 modules

Provides temperature regulation for oil, gas and electric heating installations in comfort, reduced and frost-free modes Permanent display of the current programme 4 preset programmes, 1 free programme, 4 time periods max. per day, 2 adjustable temperature levels Adjustment range: 7 °C to 30 °C Adjustment accuracy: ± 0.5 °C (category B) Permanent backup of programmes Working reserve 100 h1 output by changeover contactBreaking capacity: - 8 A - 250 V± - resistive circuit- 2 A - 250 V± - inductive circuit- 1 to 500 mA max. - 12 to 48 V±

1 0 767 21 White

Sensor for DIN-rail modular thermostat

2 modules

Measures the temperature for DIN-rail modular thermostatTo be installed with a support (p. 96)

1 0 767 23 White

0 787 05

Pack Cat.Nos Roller blind switches

For direct raise/lower/stop control of 500 W max.blind, awning or canopy motor

10 0 770 26 White1 0 792 26 Alu1 0 787 05 White antimicrobial(1)

Roller blind pushbuttonsFor 1 roller blindFor controlling 500 W max. blind, awning or canopy motor by electronic control box

10 0 770 25 White1 0 792 25 Alu

For 1 or several roller blindsFor direct control of motorsCan be associated with multiple control relay Cat.No 0 676 22 (2 positions: up/down)

10 0 770 28 White1 0 792 28 Alu

Radio roller blind controls

Individual or centralized controls, depending on settingManagement of the electronic end stop included in the programmable opening settingFunctioning via 2.4 GHz Radio waves2 modules

230 V± controlsTo be flush-mounted in boxes depth 50 mm recommended (40 mm mini)

1 0 784 26 White

Wireless wall-mounted controlsEquipped with Lithium 3 V CR 2032 batteriesMounting accessories suppliedTo be installed directly on the wall, without a flush-mounting boxTo control one individual roller blind radio switch or a group of individual roller blind radio switches

1 0 784 29 White

Single pole relay1 0 766 90 Used to bring functions with low breaking

capacity close to the application Resistive: 3000 W

Incandescent: 1800 WLV halogen: 1800 W Fluorescent: 400 VA Motors (roller blind type): 530 W2 modules

Multiple control relay1 0 676 22 For controlling several roller blinds

simultaneouslyTo be mounted in flush-mounting box depth 40 mm


0 792 28

MosaicTM Programme mechanismskeyswitches, emergency stop pushbuttons, keycard switches, hotel bedroom indicators, shaver socket

0 770 72 0 770 75 0 770 470 784 800 766 01

Pack Cat.Nos Keyswitches

2 modules

2-position switchBy changeover contact6 A - 250 V±RONIS key no. 601 Key can be removed in both positions

1 0 770 72 White

3-position switchChangeover switch with OFF position6 A - 250 V±RONIS key no. 601 Key can be removed in all 3 positions

1 0 770 73 White

2-position switch - European key barrel1 contact - 2 poles 10 A - 250 V±Key extracted in central position without changing the status of the contacts ON/OFF Must be fitted with standard European key barrel or key barrel Cat.No 0 697 95

1 0 770 74 White

3-position pushbutton - European key barrelChangeover switch with OFF position10 A - 250 V±Key extracted in OFF positionMust be fitted with standard European key barrel or key barrel Cat.No 0 697 95

1 0 770 75 White

European key barrel1 0 697 95 European key barrel supplied with one set

of 3 keys

Emergency stop mushroom head pushbuttons2 modules

With keyNO + NC 3 A - 250 V±Unlock with RONIS key no. 455

1 0 766 01 Red/yellow

1/4 turnNO + NC 3 A - 250 V±1/4 turn unlocking

1 0 766 02 Red/yellow

Pack Cat.Nos Keycard switches

For energizing a circuit by inserting an ISO format card (e.g: Cat.No 0 767 11 or hotel room access card)Time-delay: 30 sec. after card removalBacklight insert badge area2 modules

Electronic keycard switches1 0 784 80 Operates via contact with ISO card or

key fob Cat.No 0 898 06Communication: BUS/SCS

1 0 767 28 Only operates with MIFARE contactless ISO badge cards (e.g Cat.Nos 0 767 11/12/13)Contact capacity:- 110 V, power 15 VA- 230 V, power 30 VA

Mechanical keycard switches1 0 784 45 Operates via contact with ISO card or

key fob Cat.No 089806Contact capacity:- 110 V, power 15 VA- 230 V, power 30 VA

10 0 898 06 Key fobSupplied complete with a label holderfor individual hotel identification

Hotel bedroom indicatorsIndicator lamp and bell push Enables the resident to inform hotel staff of the room status Two settings are possible: - do not disturb- please clean the room

5 0 770 47 Installed in the corridor, displays calls Supplied with lamps

5 0 770 48 Allows the user to select the desired setting Supplied with lamp Cat.No 0 676 68 (p. 877)

Shaver socket IP 24 - IK 04Conform to EN 60742 and EN 61558-2 Power supply 230 VA - 50/60 Hz and 1 output120/220 VAConnection via automatic terminals Equipped with a circuit separation transformer to isolate the user from the mains supply Protected against overloads and short circuits by built-in thermal relay limiting the available power to 20 VA Insertion of the plug activates the powersupply to the transformer

1 0 775 86 With integrated support For flush mounting 2 gang boxes only, 40 mm deep 5 modules

Pack Cat.Nos QI wireless chargers - for integration into the furnitureSpecially designed for mounting horizontally on furniture. For meeting rooms, offices, public areas, etc80 mm drilling diameter, Aluminium colour. Extra-slim with thickness < 1.5 mm. Supplied with identification sticker diameter 85/110 mm, 2.5 m cord, fixing base and cable ties. 110-240 V universal power supplyPlugs conforming to European, BS, US, Australian/Chinese standards

1 0 775 80 5 W - IP 44 / IK 08 charger1 0 776 00 15 W - IP 44 / IK 06 charger

Flush-mounted wireless chargers - for public area1 A - 5 V/5 W wireless charger. Specially designed for public buildings, passageways or transit areas, swimming pools, etc. IK 08 - IP 66 - Class II SELVComes with 2 induction antennae for fast smartphone charging. Recognition area: 50 x 80 mmPlate at an angle of 10° with non-slip coating to hold the terminal safely in place during chargingScrews onto flush-mounting box with 60 mm fixing centres, min. depth 40 mm, French, German or British standard. Can also be fixed at 4 points Can be mounted on rectangular boxes and outdoors 110/230 VA Phase + Neutral power supplyMechanism supplied with cover plate, attached with 2 Torx screws at the side

1 0 775 99 Aluminium colourDimensions: 141 x 95 x 51 mm 2 x 2.5 mm2 terminals

Wireless charger + Type-A USB - Mosaic version1 A - 5 V/5 W charger with one 2.4 A/12 W USB port to power a second deviceSpecially designed for work areasFor installation in flush-mounting box, surface mounting box, workstation kit, column module, multi-outlet extension for offices, etcTo be fitted with a support and a plate depending on the selection of the wiring accessories rangesComes with 2 induction antennae for fast intuitive smartphone charging. Recognition area: 50 x 80 mmPlate at an angle of 10° with non-slip coating to hold the terminal safely in place during chargingDimensions: 136.5 x 70 x 56.5 mm Anti-theft lock functionCan be mounted in multiple horizontal positions

1 0 775 98 White with metallic finishing plate 2 x 2.5 mm2 terminals

Wireless power chargers for fast charging a smartphone with a QI receiverPower supply standby mode consumption < 0.07%Conform to the QI WPC standard (Wireless Power Consortium): certified for professional QI 1.2.3 projectsConform to EN 62479 standard (EMF emissions)Conform to ICNIRP specifications (health protection)Do not interfere with other wireless signals (Zigbee, TNT, GSM, 4G, etc)

Mosaic™ Programme wireless power chargers

Mosaic™ Programme wireless power chargers

n Wireless power charging

n Ergonomically designed to suit different environments

A Legrand innovation for fast, easy charging

An open international standard:

Horizontal charging on furniture

Vertical charging on a wall in public areas (semi-flush-mounted)

Charging in Mosaic environment

Using wireless energy transferNo need for cords and connectors

Wireless Power Consortium: 270 members, ensuring interoperability with induction-compatible phonesQI: global standard adopted by vehicle manufacturers and cafés/hotels/restaurantsProducts certified for professional QI 1.2.3 projects

Insertion in an 80 mm diameter cut-out / Fixed into furnitureExternal power supply with 2.5 m cord

Ideal for indoor or outdoor locations

With induction and 2.4 A / 12 W USB socket

Excellent resistance to impacts (IK 08) and adverse weather conditions (IP 66)Can be fixed directly on the flush-mounting box or for extra strength drilled with anchor bolts

0 775 980 775 990 775 80 supplied with sticker

See more on USB chargers See more on USB chargers

MosaicTM Programme mechanismsGerman standard multi-support single and multiple socket outlets

0 772 310 772 17 0 772 52

Automatic terminals

0 772 19

Pack Cat.Nos Multi-support single socket outlets - German standardFor installation in fl ush-mounting box, surface-mounting box, fl oor box, column module, desktop multi-outlet extension, offi ce module and trunking 2 modules

2P+E with shutters for child protection10 0 772 111 White - automatic terminals10 0 772 131 White - with special tap-off screw and

4 mm2 screw terminals10 0 772 181 Red - automatic terminals10 0 792 131 Alu - screw terminals10 0 787 021 White antimicrobial(2) - screw terminals10 0 772 161 Green antimicrobial(2) - automatic terminals10 0 772 171 Orange antimicrobial(2) - automatic terminals10 0 772 201 Red antimicrobial(2) - screw terminals

2P+E without child protection10 0 772 101 White - screw terminals

2P+E angled 45°10 0 772 451 White - automatic terminals

2P+E tamperproof10 0 772 141 Red - screw terminals

To be used with the tamperproof insert Cat.No 0 502 99

2P+E "Access Design"Special for disabled personsSimple action on the lever allows easy plug-in or unplug


2P+E with cover10 0 772 19 White antimicrobial(2) - automatic

terminals

2P+E with indicator10 0 772 12 White antimicrobial(2) - automatic

terminalsIndicator 230 V - 2.4 mA supplied

Pack Cat.Nos Multi-support multiple socket outlets - German standardFor installation in fl ush-mounting box, surface-mounting box, fl oor box, column module, desktop multi-outlet extension and offi ce moduleInclined 45° - IK 07Connection by automatic terminals

2 x 2P+E10 0 772 52 White10 0 772 90 White - with indicator 230 V - 2.4 mA

(supplied)10 0 792 82 Alu10 0 772 72 Red10 0 772 91 Red - with indicator 230 V - 2.4 mA

(supplied)10 0 772 81 Red - tamperproof. To be used with

tamperproof insert Cat.No 0 502 9910 0 772 92 Red - tamperproof, with indicator

230 V - 2.4 mA (supplied). To be used with tamperproof insert Cat.No 0 502 99

3 x 2P+E10 0 772 53 White 10 0 792 83 Alu10 0 772 73 Red10 0 772 82 Red - tamperproof. To be used with

tamperproof insert Cat.No 0 502 99

4 x 2P+E5 0 772 54 White 5 0 772 74 Red5 0 772 83 Red - tamperproof. To be used

with tamperproof insert Cat.No 0 502 99

Tamperproof insert10 0 502 99 Tamperproof insert for socket

Fits directly into the plug

Green light for socket outlets

10 0 676 63 230 VConsumption 2.4 mATo be wired

1: Can be installed in receptacles for fl oor sockets (p. 479)

2: Contains a silver compound to prevent the growth of bacteria on the surface of the plat

Pack Cat.Nos Other standard socket outlets

Euro-US standard - white10 0 775 01 1 module

10 0 775 021 2 modules

US standard - white10 0 775 03 1 module

10 0 775 04 2 modules - 15 A

British standard - white10 0 775 05 2 modules - 13 A

Italian type - white10 0 775 10 1 module - 10 A - screw terminals10 0 775 11 1 module - 10/16 A - screw terminals

German-Italian standard10 0 775 12 2 modules - 16 A - screw terminals

Not compatible with a 2-module support

Swiss type - white10 0 775 061 2 modules - type 13

Danish standard - white10 0 775 081 2 modules - with shutters for child protection10 0 775 091 2 modules - for UPS - with shutters for child

protection

Pack Cat.Nos 2P ELV socket outlet

With shutters for child protection For installation in flush-mounting box, surface-mounting box, floor box, column module, desktopmulti-outlet extension, office module and trunking

10 0 771 50 1 module - white antimicrobial(1)

Equipotential socketEqualises the voltages of all the conductive elements and all the exposed conductive parts, as well as limiting the contact voltage to a value that is not dangerous for people. For use in hospital environments to prevent disturbance of sensitive equipmentConforms to standards DIN 42801 and IEC 60364-7-710

1 0 787 00 1 moduleWhite antimicrobial(2)

Equipotential plug10 7 759 93 Equipotential connection plug

1: Can be installed in receptacles for floor sockets (p. 479)


0 775 02 0 775 04 0 775 05 0 775 06 0 787 00

MosaicTM Programme mechanismsinternational standards socket outlets

MosaicTM Programme mechanismsUSB charging sockets

0 775 910 775 94

Pack Cat.Nos USB charging sockets Type-A

For recharging portable devicesConform to IEC 62684-2011-01Surge protection > 1 kVConsumption in passive mode < 0.07 WPower supply AC/DC efficiency at highest level (VI)2 x 2.5 mm² screw terminalsClass II SELVSupplied cordless

Double USB Type-A sockets - 5 V - 2.4 A - 12 WFor fast charging smartphones and tablets PC2 modules

1 0 775 941 White1 0 793 941 Alu

Single USB Type-A sockets - 5 V - 1.1 A - 5.5 WFor fast charging smartphones and tablets PC1 module

1 0 775 91 White1 0 793 91 Alu

USB charging sockets Type-CUniversal charger for portable devicesConform to IEC 62680-1-3Surge protection > 1 kVConsumption in passive mode < 0.07 WPower supply AC/DC efficiency at highest level (VI)2 x 2.5 mm² screw terminalsClass II SELVSupplied cordless

Double USB Type-A + USB Type-C sockets - 5 V - 3 A - 15 WFor smartphones and fast charging tablets PC2 modules

1 0 775 921 White1 0 793 921 Alu

Double USB Type-C + USB Type-C sockets - 5 V - 3 A - 15 WFor smartphones and fast charging tablets PC2 modules

1 0 775 901 White1 0 793 901 Alu

Single USB Type-C sockets - 5 V - 1.5 A - 7.5 WFor smartphones and fast charging tablets PC1 module

1 0 775 89 White1 0 793 89 Alu

Pack Cat.Nos Micro USB charging dock

Cordless micro USB docking station for charging a smartphone5 V – 2.4 A power supplyScreen remains visible during chargingEquipped with:- a lateral USB port for an additional device- a smartphone clamp-holder with a non-slip andanti-scratch finish coatPossible to charge an iPhone by using the micro USBLightning adaptoriPhone is a registered Apple brandThe accessory is not supplied with the product

1 0 775 96 White

Support for portable device during chargingMultigang installation with 2xUSB charger or with a 2P+T and a mobile chargerFlat frame does not require a wall shutter box (fix using screws or adhesive on all surface)Prevents device from any risk of falling and allows secure use of device while chargingWall-mounting clampFor 1 portable device

1 0 775 97 White


0 775 96 0 775 97

2.4 A 2.4 A1.1 A

0 775 40 0 775 41

Pack Cat.Nos Voltage surge protector

16 A - 250 V± - 50/60 HzProtection against overvoltages of atmospheric or industrial origin, in an installation already protected by a voltage surge protector in the panel (p. 74)For installation downstream of an RCBO, protects all the sockets wired in cascade with the voltage surge protector. Operation displayed by indicator lightKeeps the socket energised after an overvoltage(mains or lightning strike) until replacement of moduleCat.No 0 775 41Nominal discharge current (In): 1.5 kAMaximum permissible current (Imax): 6 kAProtection level (Up): L-N: 1 kV; N-PE: 1 kVOpen circuit voltage (Uoc): 3 kV Conform to standards EN 61643-11

1 0 775 40 White2 modules

Replacement module for voltage surgeprotector

1 0 775 41 For Cat.No 0 775 40

Buzzers and bellsBuzzers - 2 modules

10 0 766 40 White - 8 V± - 50/60 HzConsumption 370 mASound level 70 dB at 1 m

10 0 766 41 White - 230 V± - 50/60 HzConsumption 25 mASound level 70 dB at 1 m

Electronic bell - 2 modules1 0 766 42 White

12-24-48 V=Consumption 5-9-17 mA

Depending on power supply Sound level 80 dB at 1 m

Blanking platesFor Mosaic mechanisms

10 0 770 70 White - 1 module10 0 792 70 Alu - 1 module10 0 787 20 White antimicrobial(1) - 1 module10 0 770 71 White - 2 modules10 0 792 80 Alu - 2 modules10 0 787 21 White antimicrobial(1) - 2 modules

Pack Cat.Nos Cable outlets

16 A with cable grip - 2 modulesEquipped with 4 automatic connection terminals on the front and rear faces for easy connection

10 0 775 51 White

20 A with cable grip - 2 modules10 0 775 50 White

Ø8 mm wire outlet - 1 module10 0 775 52 White

Anti-extraction moduleWhen used with a socket, avoids accidental unplugging of sensitive electrical equipment, by gripping the cord (Ø4 to 8 mm cords)Can withstand an extraction force of 350 N (35 kgs)

1 0 770 80 1 module - white antimicrobial(1)

Proximity MCBsUsed for local protection of part of a circuit against overloads and short circuitsUsed in addition to the main protection deviceDue to its proximity to the user and its discrimination with the main protection device, the restart can be immediate2 modulesTechnical characterictics : see e-catalogue

Single pole thermal magnetic MCB+ Neutral 230 V±Can also be used as a local consumption limiter(depending on its rating)Breaking capacity: 3000 A - NF C 61-410 (10/16 A)1500 A - NF C 61-410 (6 A)White

1 0 775 21 10 A1 0 775 22 16 A

Single pole RCBOs + Neutral 230 V±Provides additional protection of people (premises with conductive fl ooring, presence of water, etc.) against direct contact with live parts or earth leakagesWhite

1 0 775 31 10 A - 30 mA with test button1 0 775 32 16 A - 30 mA with test button1 0 775 33 10 A - 10 mA with test button1 0 775 34 16 A - 10 mA with test button


0 775 51 0 775 21 0 770 80

MosaicTM Programme mechanisms

voltage surge protector, replacement module, buzzers, bells, blanking plates, cable outlets and proximity MCBs

MosaicTM Programme mechanismsRJ 45 sockets - cat. 6A and 6

0 765 76 0 794 76 0 765 990 765 24 0 765 250 765 73

Can be integrated in all supports (p. 900-901)Contacts marked with dual colour code and wiring schemes T 568 A and T 568 BConform to standards ISO/IEC 11801 Ed. 3.0, amendment 2, EN 50173-1 and TIA/EIA C

Pack Cat.Nos Cat. 6A RJ 45 sockets

STP - 1 module360° metal shielding

10 0 765 73 White10 0 794 73 Alu

STP - 2 modules360° metal shielding

10 0 765 761 White10 0 794 761 Alu

10 0 765 241 White with green shutter

10 0 765 251 White with orange shutter

10 0 765 08 White - angled 45°

STP with controlled access - 2 modules360° metal shieldingSupplied with 2 keys for 5 sockets

5 0 765 99 White with red shutter

UTP - 1 module10 0 765 71 White10 0 794 71 Alu10 0 765 26 White with green shutter10 0 765 27 White with orange shutter

UTP - 2 modules10 0 765 741 White10 0 794 741 Alu

UTP with controlled access - 2 modulesSupplied with 2 keys for 5 sockets


10 0 765 09 White

Pack Cat.Nos Cat. 6 RJ 45 sockets

UTP - 1 module10 0 765 61 White10 0 794 61 Alu10 0 765 81 White antimicrobial




UTP 90° - 2 modulesVertical snap-on socket for column module

10 0 765 91 White

UTP 45° - 2 modules10 0 765 03 White

UTP 45° - 2 x RJ 45 - 2 modules5 0 765 04 White

UTP retractable RJ 45 socket - 4 modulesWith integrated retractable cord (0.9 m)Winds up automatically with a pushbutton

1 0 765 32 White

FTP - 1 module10 0 765 62 White10 0 794 62 Alu10 0 765 82 White antimicrobial

FTP - 2 modules10 0 765 651 White10 0 794 651 Alu10 0 765 221 White with green shutter10 0 765 231 White with orange shutter


MosaicTM Programme mechanismsRJ 45 sockets - cat. 5e

MosaicTM Programme mechanismsRJ 45 sockets - cat. 6

Pack Cat.Nos Cat. 6 RJ 45 sockets (continued)

FTP with controlled access - 2 modulesSupplied with 2 keys for 5 sockets


FTP 45° - 2 modules10 0 765 05 White

FTP 2 x RJ 45 45° - 2 modules5 0 765 06 White

FTP retractable RJ 45 sockets - 4 modulesWith integrated retractable cord (0.9 m) Winds up automatically with a pushbutton

1 0 765 33 White1 0 794 33 Alu

FTP 90° - 2 modulesVertical snap-on socket for column module

10 0 765 92 White10 0 794 92 Alu

Shielded STP - 1 module10 0 765 63 White10 0 765 83 White antimicrobial

Shielded STP - 2 modules10 0 765 661 White

Shielded STP with controlled access - 2 modulesSupplied with 2 keys for 5 sockets


STP 45° - 2 modulesVertical snap-on socket for column module

10 0 765 07 White

Shielded STP 90° - 2 modulesVertical snap-on socket for column module

10 0 765 93 White


Can be integrated in all supports (p. 900-901)Contacts marked with dual colour code and wiring schemes T 568 A and T 568 BConform to standards ISO/IEC 11801 Ed. 3.0, amendment 2, EN 50173-1 and TIA/EIA 568 C

0 794 33 0 765 63 0 765 96 0 765 52 0 794 550 765 54

Pack Cat.Nos Cat. 5e RJ 45 sockets

UTP - 1 module10 0 765 51 White10 0 794 51 Alu




UTP retractable RJ 45 socket - 4 modulesWith integrated retractable cord (0.9m) Winds up automatically with a pushbutton

1 0 765 30 White

UTP 45° - 2 modules10 0 765 01 White

2 x RJ 45 UTP 45° - 2 modules5 0 765 02 White

FTP - 1 module10 0 765 52 White10 0 794 52 Alu

FTP - 2 modules10 0 765 551 White10 0 794 551 Alu

FTP with controlled access - 2 modulesSupplied with 2 keys for 5 sockets



Can be integrated in all supports (p. 900-901)Contacts marked with dual colour code and wiring schemes T 568 A and T 568 BConform to standards ISO/IEC 11801 Ed. 3.0, amendment 2, EN 50173-1 and TIA/EIA 568 C

MosaicTM Programme mechanismsrear pluggable RJ 45 sockets and switches

0 786 22 0 786 26

0 779 00

Pack Cat.Nos Rear pluggable RJ 45 sockets

For use with area distribution boxes systemConnection to boxes via RJ 45-RJ 45 cordsUsed to create Cat. 6A, 6 and 5e links in accordance with standards ISO 11801 ed.2.0, EN 50173-1 and EIA/TIA 568 B2Multi-directional cable entryCan be installed in all supports minimum depth 40 mm. 2 modules

Cat. 6A STP10 0 786 28 White10 0 786 29 Alu

Cat. 6 FTP9 contacts

10 0 786 23 White10 0 786 27 Alu

Cat. 6 UTP8 contacts

10 0 786 22 White10 0 786 26 Alu

Cat. 5e FTP9 contacts

10 0 786 21 White10 0 786 25 Alu

Cat. 5e UTP8 contacts

10 0 786 20 White10 0 786 24 Alu

Flush-mounting switches

Non manageable switchesFor networking computer peripherals without a patchpanel: computers, printers, servers, etc.Possibility of extending an existing network bysimply replacing an RJ 45 socketTool-free connectionConform with standards IEEE 802.3 (Ethernet) andEN 500 81/82-2 (EMC requirements)Installation in all supports with minimum 40 mm depth6 ports at the front + 1 side RJ 45 connector forcabling and carrying out link testsPort status display integrated into the RJ 45 connectorsLabelling of each port from 1 to 6 and marker holderfor switch identifi cation6 modules

1 0 779 00 230 V supply1 0 779 01 PoE supply (802.3 ag)


0 786 17

MosaicTM Programme mechanismsdata sockets

Pack Cat.Nos RJ 45 doubler sockets

1 moduleEthernet/Ethernet

10 0 765 39 FTP - 9 contacts10 0 765 38 UTP - 8 contacts

Telephone/Ethernet10 0 765 37 FTP - 9 contacts10 0 765 36 UTP - 8 contacts

Telephone/telephone10 0 765 35 45 contacts

Adaptors for RJ 45 connectorEquipped with transparent marker holderWhite - 2 modules

10 0 786 04 For single Keystone connector

10 0 786 10 For 2 Keystone connectors

10 0 786 13 For 2 Keystone connectors - inclined 45°

10 0 786 02 For single Systimax connector

10 0 786 03 For double Systimax connector

10 0 786 09 For single Infra+ connector

Optical sockets - 2 modulesFor connecting 2 fibres to the workstationEquipped with 1 duplex adaptorSupplied with protective caps

1 0 786 14 SC/APC single mode fi ber optic socket

1 0 786 16 Socket with 2 ST optical adaptors bayonet connection

1 0 786 17 Socket with 2 SC optical adaptors push-pull connection

1 0 786 18 Socket with 2 LC optical adaptors push-pull connection


0 765 35 0 786 13

0 787 86

MosaicTM Programme mechanismstelevision sockets

MosaicTM Programme mechanisms

telephone sockets

Pack Cat.Nos Telephone sockets

RJ 11 and RJ 12 socketsEquipped with a modular Jack connector with 1/4 turn terminal for fast connection. Tap-off possible

10 0 787 30 White - RJ 11, 4 contacts - 1 module10 0 792 31 Alu - RJ 11, 4 contacts - 1 module

10 0 787 311 White - RJ 11, 4 contacts - 2 modules

10 0 787 321 White - RJ 12, 6 contacts - 2 modules

ISDN socketSelf-stripping 1/4 turn terminals for fast connection Tap-off possible

10 0 787 34 White - 8 contacts, 2.5 mm2 earth terminal

Flush-mounting telephone/Ethernet double connectorsProvide increased security against theft and damage to double connectors Provide a rate of 10/100 Mbps Multidirectional cable entry Can be installed in all supports min. 35 mm deep Telephone and Ethernet applications marked onthe protective flap9 contacts - 1 module - White

10 0 765 37 FTP10 0 765 36 UTP


0 787 32 0 767 37 0 787 95 0 787 94 0 787 93

For DVBT, Cablecast and satellite installationUHD TV compatibleClass A shielded star sockets LTE Ready (4G protected) Recommended coaxial cable: 17 VATCStar cabling (1 socket = 1 cable to antenna, splitter or multiswitch) Visual checking of the connectionMeet EN 50083-4 and EN 50083-2 European directiveTV: male connector (Ø9.5 mm) - 5-68 / 120-862 MHzR: female connector (Ø9.5 mm) - 87.5-108 MHzSAT: "F type" connector - 950-2400 MHz

Pack Cat.Nos Multi TV star sockets

TV-SAT - 1 module5 0 787 95 White

Low attenuation: 1 dB

TV-R-SAT - 2 modulesLow attenuation: 1.5 dB

10 0 787 861 White10 0 792 961 Alu

TV-R-SAT - SAT 2 modules10 0 787 941 White

(In 1 TV-R-SAT / In 2 SAT 2) Low attenuation: 1.5 dB

Single TV star socketsLow attenuation: 1 dB

TV 9.5 mm male5 0 787 93 White - 1 module

10 0 787 821 White - 2 modules10 0 792 921 Alu - 2 modules

TV "F-type"10 0 787 90 White - 1 module



MosaicTM Programme mechanismsBluetooth sound diffusion

MosaicTM Programme mechanismsBluetooth sound diffusion

0 787 45 5 739 82

Pack Cat.Nos Bluetooth sound diffusion

Allows music fi les or Internet Webradio reception from a smartphone or other devices via Bluettoth (wireless) or from jack input (3.5 mm cord not included)Loudspeackers to be wired to the bluetooth moduleIdeal for bathroom, kitchen or bedroom

Bluetooth module15 V= power supplyStereo or mono input on a 4/8 or 16 ohms loudspeaker2 modules

1 0 787 45 White

Power supply in false ceiling For Bluetooth module

1 0 673 22 Power supply 230 V~Output 15 V= - 3.5 WFor use in a Plexo boxCat.No 0 920 52

Loudspeakers

For false ceiling and plasterboard1 0 673 27 White fl ush loudspeaker

Depth 27 mmØ hole: 65 mmL max: 75 mm

Visible depth: 5 mmPower: 2 W / 16 ohms - 2"Equipped with clips for attachment

1 5 739 82 White fl ush loudspeakerDepth 57 mmØ hole: 90 mmL max: 100 mm

Visible depth 7.5 mmPower: 20 W musical - 10 Wrms/8 ΩSensitivity 86 dB (1 W/1 m)Equipped with clips for attachment

For wall fl ush-mounting1 0 673 03 Black fl ush loudspeaker

Depth 40 mmVisible depth: 10 mmL max: 127x127 mmPower: 12 W musical - 6 Wrms/16 Ω

Screw mounting for installation in fl ush-mounting box

0 673 03

Musical enjoyment• Mobile access to digital radio• Mobile access to my download music• Provides every day comfort

Installation• Easy to set up with Bluetooth• Mounting multigang with all Mosaic plates (p. 904)

Loudspeakers• High quality sound with 8 Ω and 16 Ω loudspeakers• Flush-mounting in false ceiling or wall-mounting

� Installation principale

-+

NL230 VA

15 V

13 mm maxi

6652

6

MosaicTM Programme mechanismsSUB D socket, USB data sockets and USB extender

Pack Cat.Nos USB data sockets - for data transferUsed to bring connections closer to the userFor connecting USB devices (scanner-printer, external hard disk)Max. cable length: 5 m. Recommended cable: USB A 1 module

Preterminated - USB 3.0Max. cable length: 5 mRecommended cable: USB AEquipped with a 15 cm cord

1 0 787 46 White

Connection via screw terminals - USB 2.0Max. cable length: 5 mRecommended cable: USB AUSB 2.0. Cross-section: 1 mm²

1 0 787 61 White1 0 792 84 Alu

USB extender - for data transferUsed to bring connections closer to the user in case of large distancesFor connecting USB devices (digital school board / interactive whiteboard…) located more than 5 m away (30 m max.) from a source (computer…)The kit includes a transmitter(1 module) and a receiver (1 module). The link between the transmitter and the receiver is made via a RJ 45 / RJ 45 cord

1 0 787 48 White

SUB D sockets - 2 modules1 0 787 65 9 contacts - Screw terminals connection

to link type RS 232 series

0 787 46 0 787 48

AUDIO/VIDEO SYSTEM

right systemneedsto meet

The

your

Quick installation

Optimum performance Easy connection

A wide range of technologies (HDMI, HD15 DISPLAY PORT, RCA, JACK) to suit the location and the user requirements

Female HDMI 1.4 preterminated socket

Audio socket

Cords and cables

Audio/video 19" patch panel

MosaicTM Programme mechanismsaudio and video sockets

0 787 74

0 517 38

Pack Cat.Nos HDMI type A sockets

Used to transmit high-defi nition digital audio/video streams between a source (computer, Blu-ray player…) and a compatible receiver (TV, videoprojector…)

Preterminated HDMI 1.4 - 1 moduleEquipped with cord, length 15 cm

1 0 787 78 White1 0 793 78 Alu

Screw-type sockets HDMI 1.3 - 2 modules1 0 787 681 White1 0 792 751 Alu

HDMI extender1 0 517 38 Extends HDMI audio/video signals

up to 60m and up to a 4K resolution using HDBaseT Lite technologySupport of IR control allows a device to be remotely controlledUsed to connect remote HDMI terminals up to 57 m

The kit comprises transmitter and receiver units as well as power suppliesThe transmitter and receiver are linked by an RJ 45/RJ 45 cable (not supplied) (see p. 736)Compatible with 4K, 3D, EDID and HDCPIncluding infrared controlCertifi ed HDBaseT

Display port socketsUsed to transmit high-defi nition digital audio/video streams between a source (laptop, computer, etc) and a compatible receiver (videoprojector, TV…)

Preterminated socket - 1 moduleEquipped with cord, length 15 cm

1 0 787 91 White

Pack Cat.Nos HD15 sockets

Used to transmit analog video streams (VGA, XGA, UXGA depending on graphic card) between a source (computer) and a compatible receiver(video projector, TV...)

Preterminated sockets - 1 moduleEquipped with cord, length 15 cm

1 0 787 77 White1 0 793 77 Alu

Screw-type sockets - 2 modules1 0 787 571 White1 0 792 571 Alu

Screw-type socket + 3.5 mm Jack - 2 modules1 0 787 74 White

Solder-type socket - 1 module15 pin

1 0 787 72 White


0 787 78 0 787 91

0 787 77

MosaicTM Programme mechanismsaudio and video sockets (continued)

0 787 79 0 787 760 787 60 0 787 50

Pack Cat.Nos Videoprojector switch

Universal remote switch allowing to turn ON orplace in STANDBY mode a video projectorWorks with all videoprojectors or TV through IR learning processInstalled close to the room's lighting switches, it replaces the constructors remote andfosters the ignition and extinction of the videoprojector therefore reducing energy consumption and extending the bulb's lifetime

1 0 787 99 White

Jack sockets 3.5 mm3.5 mm Jack connectors can be used to create audio/video links

Preterminated sockets - 1 moduleEquipped with cord, length 15 cm

1 0 787 79 White1 0 793 79 Alu

4 screw-type female 3.5 mm Jack socket - 1 module1 0 787 64 White1 0 792 64 Alu

Solder-type female 3.5 mm Jack socket - 1 module1 0 787 73 White

Female 2 RCA socketsProvide the stereo audio link for any peripheral device such as a DVD drive, camera, video recorder1 module

PreterminatedEquipped with a 15 cm cord

1 0 787 47 White

Connection via screw terminals1 0 787 53 White

Female 3 RCA socketsProvide the composite video and stereo audio links for any peripheral device such as a DVD drive, camera, video recorder, videoconferencing, etcConnection via screw terminals 1 module

1 0 787 54 White1 0 792 54 Alu

Pack Cat.Nos 3-pole XLR sockets

Provide the stereo link for microphone, amplifier, mixing console, etc.Recommended cable: 1 audio pair 0.14 mm² to 0.5 mm² shieldedMax. cable length: 50 m (without amplifier)2 modules

1 0 787 55 White - fast screw connection female1 0 792 55 Alu - fast screw connection female

1 0 787 56 White - fast screw connection male

4-pole SpeakonUsed to connect power enclosuresRecommended cable: 2 audio pairs 4 mm²Max. cable length: 50 m (without amplifier)2 modules

1 0 787 60 White - fast screw connection female

Loudspeaker socketsTerminal 4 mm²


10 0 787 50 White - 1 module10 0 792 50 Alu - 1 module

Attenuator100 V - 25 WAllows to adjust power to 25 W from a balanced 100 V loudspeaker line 2 modules

1 0 787 76 White

Other audio and video sockets

Female BNC 75 socket - 1 moduleProvides the composite video link for any peripheral device such as a DVD drive, camera, video recorder, etc

1 0 787 58 White


XLR

Min

12

3

PUSH

0 787 47 0 787 55

MosaicTM Programme mechanismsilluminated signage functions, bulkhead lights, indicator lights and downlighter

0 785 20 0 785 22 0 785 11

0 785 010 785 10 0 785 60 Preprinted labels available in e-catalogue

All the illuminated functions are equipped with very low consumption LEDs with an estimated service life of 100,000 hours

Pack Cat.Nos llluminated signs 230 V±Mechanisms integrating LEDs and a pivoting window that can take preprinted labels (available in the e-catalogue)Customised labels can be printed using a simpletext editorSupplied with transparent paper to personalize labels

5 0 785 20 Signs with white LEDs - 2 modules A choice of 2 power levels(0.2 W or 1 W)

5 0 785 21 Signs with blue LEDs - 2 modules A choice of 2 power levels(0.2 W or 1 W)

5 0 785 24 Signs with 2-state LEDs with choiceof green or red confi gurable on the mechanism (1 W) - 2 modules

1 0 785 22 Signs with white LEDs (1 W)5 modules

1 0 785 23 Signs with blue LEDs (1 W)5 modules

Self-contained pilot light1 0 785 12 During a power failure, automatically gives

light using a high power white LED (stand-alone operation: 1 hour)Circular lighting by blue LED in

standby mode - 2 modulesSupplements the regulatory safety lighting system to meet high requirements (for child care centres, health, accessibility, retirement homes, etc.)Option of switching off by remote control

Skirting light with motion sensor1 0 785 11 Mechanism equipped with an infrared

detection cell and a LED beamTo be installed close to the fl oor (next to a socket for example)

When someone passes, the mechanism detects movement and switches the light onIdeal to illuminate a corridor at night without dazzling people, or to highlight possible dangerEquipped with an audible signal that can be deactivated (when product is used for lighting) or not (so as to indicate danger)

Pack Cat.Nos Bulkhead pilot light

1 0 785 10 To be installed in skirting trunking or bedhead strip 230 V - 2 modulesWhite antimicrobial(1)

Bulkheads2 modules

12-24 V± /= - 0.6 W10 0 785 60 Red10 0 785 61 White10 0 785 62 Green10 0 785 63 Blue

230 V± (0.2 or 1 W)10 0 785 70 Red10 0 785 71 White10 0 785 72 Green10 0 785 73 Blue

Indicator lights 1 moduleFor indicator or illuminated functions. Supplied with 4 coloured labels (red, orange, green and blue)

10 0 785 01 Single indicator 230 V (1 W) - Antimicrobial(1)

10 0 785 02 Double indicator 230 V (1 W)Antimicrobial(1)

10 0 785 51 Single indicator 12-24 V (0.2 W)Antimicrobial(1)

10 0 785 52 Double indicator 12-24 V (0.2 W)Antimicrobial(1)

Downlighter Skirting Light – Centralized supply

1 0 785 13 White1: Contains a silver compound to prevent the growth of bacteria on the surface of the plate

MosaicTM Programme mechanisms

Documents

Transcript of MosaicTM Programme mechanisms