Crossover line was leaked at F-2101
Transcript of Crossover line was leaked at F-2101
CROSSOVER LINEWas leaked 2
• on 31 July 2014, after start up, crossover line No.6 was leaked on elbow at F-2101.• On 1 august 2014 another elbow on crossover line No.6 was leaked again.• On site, we found blemish of crude .
INTRODUCED
Written by thiraphop t. (ENMM-PW)
CROSSOVER LINEWas leaked 3CONTENT
HOW TO REPAIR ?
SIMULATION RESULT
Written by thiraphop t. (ENMM-PW)
CROSSOVER LINEWas leaked 4HOW TO REPAIR ?
• firstly, we created “elbow clamping spool “ in fabshop and bring it to site in order to clamped a leaked-elbow. Unfortunately, “elbow clamping spool” doesn’t match with a leaked-elbow so we have to modify it on site
Written by thiraphop t. (ENMM-PW)
CROSSOVER LINEWas leaked 5CONTENT
HOW TO REPAIR ?
SIMULATION RESULT
Written by thiraphop t. (ENMM-PW)
CROSSOVER LINEWas leaked 6SIMULATION RESULT
• on assumption in excel “crossover line was leaked at F-2101” that is attached with PPT. we found that crossover line No.6 dosen’t angle 90’ that same elbow on site.
Written by thiraphop t. (ENMM-PW)
CROSSOVER LINEWas leaked 7SIMULATION RESULT • these are the result of other
crossover lines.
Written by thiraphop t. (ENMM-PW)
Coil No.1
Coil No.2
Coil No.3
Coil No.4
Coil No.5
Coil No.7
Coil No.8