•

•Propane•Solution for remote monitoring of tanks

•

·Used for monitoring unit for tank ·Powered by disposable battery (no A/C power required) ·Common battery type CR-123A ·Batteries (six) supports 6,500 transmissions ·Operates on the digital GSM or

CDMA network ·Easy to install, does not require any modification to the tank

·Installation time is of +/-15 minutes ·Designed for operation in bad

weather (NEMA 4) ·Tolerates the variations of temperature

•* Adaptive Telemetry: •Automatically adjusts the frequency of

reports depending on the movement of inventory, maintaining up-to-date web portal

•Confidencial 2009

•Steady propane tank capacity: 1,000 Gal

Confidential 2009

Unit activation:

• Install 2 board batteries

• Install battery pack - with black and red wire

• Push the (white) start button

• Confirm all green LED lights

• Connect external antenna • Close unit and seal with

front screw

Start

•

•Top view of propane tank •before installation

•Close Up pre-installation

The existing cover indicates 61% ~ 62% approximately Only two screws should be removed, they are securing measuring sleeve Warning: The four screws that secure the internal float should not be removed.

Note: See the Quick Setup Guide for more details

9 Confidencial - 2009

•

•Close Up of the sensor installed

•10

•Confidencial y Propietario - 2009

• The measurement is still visible to The user• The magnetic sensor indicates •61% ~ 62%• Note: It is normal that there is a slight •variation (1% to 4%) in

some cases. • The cable connected to the

•magnetic sensor should not hang directly sensor to prevent tension sensor

•

•

Completed Installation

•

•Magnetically installation time: 10 minutes

•Unit Prophet GSM installed