2012 Tank Link Propane installation
Transcript of 2012 Tank Link Propane installation
•
·Used for monitoring unit for tank ·Powered by disposable battery (no A/C power required) ·Common battery type CR-123A ·Batteries (six) supports 6,500 transmissions ·Operates on the digital GSM or
CDMA network ·Easy to install, does not require any modification to the tank
·Installation time is of +/-15 minutes ·Designed for operation in bad
weather (NEMA 4) ·Tolerates the variations of temperature
•* Adaptive Telemetry: •Automatically adjusts the frequency of
reports depending on the movement of inventory, maintaining up-to-date web portal
•Confidencial 2009
•Steady propane tank capacity: 1,000 Gal
Confidential 2009
Unit activation:
• Install 2 board batteries
• Install battery pack - with black and red wire
• Push the (white) start button
• Confirm all green LED lights
• Connect external antenna • Close unit and seal with
front screw
Start
•Close Up pre-installation
The existing cover indicates 61% ~ 62% approximately Only two screws should be removed, they are securing measuring sleeve Warning: The four screws that secure the internal float should not be removed.
Note: See the Quick Setup Guide for more details
9 Confidencial - 2009
•
•Close Up of the sensor installed
•10
•Confidencial y Propietario - 2009
• The measurement is still visible to The user• The magnetic sensor indicates •61% ~ 62%• Note: It is normal that there is a slight •variation (1% to 4%) in
some cases. • The cable connected to the
•magnetic sensor should not hang directly sensor to prevent tension sensor