2
KITA HR Monoblock
MADE IN ITALY
Kita Templari HR versions are monoblock/split reversible air to water heat pumps with high efficiency , scroll injection compressor with inverter. The air-water heat pump HR combines technology and design by 360 degrees. This heat pump not only easily matches with the surroundings but also makes the silentness its key strength, in fact the fan is located in the upper part of the heat pump in order to avoid any noise due to the air flow generated by the fan.
OPTIONAL FOR KITA HR MONOBLOCK ON REQUEST (to be requested at the order)
HP Air/Water inverter
* The heat pump is supplied without gas. The adjustment of the gas price will be monthly based on market quotations.
DOMESTIC HOT WATER PRODUCTION IN PRIORITY
WEB REMOTE CONTROLL
CERTIFICATE OF MANUFACTURING PROCESS
SCROLL SMART INJECTION COMPRESSOR
CLIMATE COMPENSATION
MULTI-KITA MANAGEMENT
HEATING AND COOLING
HIGH EFFICIENCY ELETRONIC PUMPS
DOUBLE ELECTRICITY EXPANSION VALVE WITH ELECTRONIC CONTROLLED
REFRIGERANT GAS R410A
HIGH EFFICIENCY EC FAN
MANAGEMENT INVERTER
ArticleK-AVTSee proper section at pag. 18PMP-DIRECT(In case of “no-puffer” mode, if high water flow rate is needed)
Available with 7’’touch panel.
ArticleK-TOUCHTouch panel 7’’ included withpredisposition to internetconnection for remot controlG-CALSee proper section at pag. 18
G-ACSSee proper section at pag. 18PREWIRED CABLE MONOBLOCKSee proper section at pag. 1810m20m30m
Model U.M. HR 10 HR 12 HR 14 HR 10 3Phase HR 12 3Phase HR 14 3Phase HR 14 Cold 3Phase
Heating capacity (A7/W35)
kW 9,90 12,16 14,27 9,90 12,16 14,27 14,30
Cooling capacity (A35/W18)
kW 11,86 13,06 16,23 11,86 13,06 16,23 16,23
Supply V-Hz 230/1/50 230/1/50 230/1/50 400/3/50 400/3/50 400/3/50 400/3/50Compressor Scroll Inverter
E.V.I.Scroll Inverter
E.V.I.Scroll Inverter
E.V.I.Scroll Inverter
E.V.I.Scroll Inverter
E.V.I.Scroll Inverter
E.V.I.Scroll Inverter
E.V.I.Refrigerant tipo R410A R410A R410A R410A R410A R410A R410AMeasures LxAxP mm 880x1800 880x1800 880x1800 880x1800 880x1800 880x1800 880x1800Weight kg 230 230 230 230 230 230 230
3
KITA HR Split
MADE IN ITALY
Kita Templari HR versions are monoblock/split reversible air to water heat pumps with high efficiency , scroll injection compressor with inverter. The air-water heat pump HR combines technology and design by 360 degrees. This heat pump not only easily matches with the surroundings but also makes the silentness its key strength, in fact the fan is located in the upper part of the heat pump in order to avoid any noise due to the air flow generated by the fan.
OPTIONAL FOR KITA HR SPLIT ON REQUEST (to be requested at the order)
HP Air/Water inverter
* The heat pump is supplied without gas. The adjustment of the gas price will be monthly based on market quotations.
DOMESTIC HOT WATER PRODUCTION IN PRIORITY
WEB REMOTE CONTROLL
CERTIFICATE OF MANUFACTURING PROCESS
SCROLL SMART INJECTION COMPRESSOR
CLIMATE COMPENSATION
MULTI-KITA MANAGEMENT
HEATING AND COOLING
HIGH EFFICIENCY ELETRONIC PUMPS
DOUBLE ELECTRICITY EXPANSION VALVE WITH ELECTRONIC CONTROLLED
REFRIGERANT GAS R410A
HIGH EFFICIENCY EC FAN
MANAGEMENT INVERTER
Available with 7’’touch panel.
ArticleK-TOUCHTouch panel 7’’ included withpredisposition to internetconnection for remot controlG-CALSee proper section at pag. 18
G-ACS-SSee proper section at pag. 18
ArticlePMP-DIRECT(In case of “no-puffer” mode, if high water flow rate is needed)
ArticlePREWIRED CABLE SPLITSet of 4 cables with pre-wired connectors on one side. Available with the following length:10m20m30m
MANDATORY ACCESSORIES
Model U.M. HR 10 Split HR 12 Split HR 14 Split HR 10 3Phase
Split
HR 12 3Phase
Split
HR 14 3Phase
Split
HR 14 Cold 3Phase
SplitHeating capacity (A7/W35) kW 9,90 12,16 14,27 9,90 12,16 14,27 14,30Cooling capacity (A35/W18) kW 11,86 13,06 16,23 11,86 13,06 16,23 16,23Supply V-Hz 230/1/50 230/1/50 230/1/50 400/3/50 400/3/50 400/3/50 400/3/50Compressor Scroll Inverter
E.V.I.Scroll Inverter
E.V.I.Scroll Inverter
E.V.I.Scroll Inverter
E.V.I.Scroll Inverter
E.V.I.Scroll Inverter
E.V.I.Scroll Inverter
E.V.I.Refrigerant tipo R410A R410A R410A R410A R410A R410A R410AMeasures LxAxP
Ext. Un. mm 880x1800 880x1800 880x1800 880x1800 880x1800 880x1800 880x1800Int. Un. 550x878.4x208 550x878.4x208 550x878.4x208 550x878.4x208 550x878.4x208 550x878.4x208 550x878.4x208
Weight Ext. Un. kg 230 230 230 230 230 230 230Int. Un. 50 50 50 50 50 50 50
4
Model U.M. S S3Phase SPlus SPlus 3phaseHeating capacity (A7/W35) kW 10,00 10,00 12,00 12,00Cooling capacity (A35/W18) kW 8,30 8,30 8,70 8,70Supply V/Ph/Hz 230/1/50 400/3/50 230/1/50 400/3/50Compressor Twin Rotary Twin Rotary Twin Rotary Twin RotaryRefrigerant R410A R410A R410A R410AMeasures LxAxP mm 1406x908x550 1406x908x550 1406x908x550 1406x908x550Weight kg 180 180 180 180
MADE IN ITALY
KITA Templari S versions are monoblock reversible air to water heat pumps with high efficiency, twin rotary compressor with inverter. They are adapted to satisfy the needs for low heating demand buildings.
OPTIONAL FOR KITA S MONOBLOCK ON REQUEST (to be requested at the order)
HP Air/Water inverter
DOMESTIC HOT WATER PRODUCTION IN PRIORITY
WEB REMOTE CONTROLL
CERTIFICATE OF MANUFACTURING PROCESS
TWIN ROTARY COMPRESSOR
CLIMATE COMPENSATION
MULTI-KITA MANAGEMENT
HEATING AND COOLING
HIGH EFFICIENCY ELETRONIC PUMPS
ELECTRICITY EXPANSION VALVE WITH ELECTRONIC CONTROLLED
REFRIGERANT GAS R410A
HIGH EFFICIENCY EC FAN
MANAGEMENT INVERTER
* The heat pump is supplied without gas. The adjustment of the gas price will be monthly based on market quotations.
KITA S Monoblock
ArticleK-TOUCHTouch panel 7’’ included withpredisposition to internetconnection for remot controlK-LEGS-SMSee proper section at pag. 18
FRONT GRIDfrontal grid to cover the fan
PROTECTION-GRID-SSee proper section at pag. 18
G-CALSee proper section at pag. 18
G-ACSSee proper section at pag. 18
ArticlePREWIRED CABLE MONOBLOCKSee proper section at pag. 1810m20m30mK-RSCSee proper section at pag. 18
K-AVTSee proper section at pag. 18PMP-DIRECT(In case of “no-puffer” mode, if high water flow rate is needed)
K-AVSPEC/PSee proper section at pag. 18
With 7’’ touch panel.
5
HP Air/Water inverter
MADE IN ITALY
KITA Templari S versions are split reversible air to water heat pumps with high efficiency, twin rotary compressor with inverter. They are adapted to satisfy the needs for low heating demand buildings.
Model U.M. S Split S3Phase Split SPlus Split SPlus 3phase SplitHeating capacity (A7/W35) kW 10,00 10,00 12,00 12,00Cooling capacity (A35/W18) kW 8,30 8,30 8,70 8,70Supply V/Ph/Hz 230/1/50 400/3/50 230/1/50 400/3/50Compressor Twin Rotary Twin Rotary Twin Rotary Twin RotaryRefrigerant R410A R410A R410A R410AMeasures LxAxP
Ext. Un. mm 1406x908x550 1406x908x550 1406x908x550 1406x908x550Int. Un. 550x878.4x208 550x878.4x208 550x878.4x208 550x878.4x208
Weight Ext. Un. kg 160 160 160 160Int. Un. 50 50 50 50
OPTIONAL FOR KITA S SPLIT ON REQUEST (to be requested at the order)
DOMESTIC HOT WATER PRODUCTION IN PRIORITY
WEB REMOTE CONTROLL
CERTIFICATE OF MANUFACTURING PROCESS
TWIN ROTARY COMPRESSOR
CLIMATE COMPENSATION
MULTI-KITA MANAGEMENT
HEATING AND COOLING
HIGH EFFICIENCY ELETRONIC PUMPS
ELECTRICITY EXPANSION VALVE WITH ELECTRONIC CONTROLLED
REFRIGERANT GAS R410A
HIGH EFFICIENCY EC FAN
MANAGEMENT INVERTER
* The heat pump is supplied without gas. The adjustment of the gas price will be monthly based on market quotations.
KITA S Split
ArticlePREWIRED CABLE SPLITSet of 4 cables with pre-wired connectors on one side. Available with the following length:10m20m30m
MANDATORY ACCESSORIES
ArticleG-CALSee proper section at pag. 18G-ACS-SSee proper section at pag. 18K-RSCSee proper section at pag. 18
PMP-DIRECT(In case of “no-puffer” mode, if high water flow rate is needed)
K-AVSPEC/PSee proper section at pag. 18
ArticleK-TOUCHTouch panel 7’’ included withpredisposition to internetconnection for remot controlK-LEGS-SMSee proper section at pag. 18
FRONT GRIDfrontal grid to cover the fan
PROTECTION-GRID-SSee proper section at pag. 18
With 7’’ touch panel.
6
Model U.M. Si / Si 3phase Si Cold / Si Cold 3phase
Si Plus / Si Plus 3phase
Si Plus Cold / Si Plus Cold 3phase
Heating capacity (A7/W35) kW 10,00 10,00 12,48 12,00Cooling capacity (A35/W18) kW 8,75 8,75 10,79 10,79Supply V/Ph/Hz 230/1/50 /
400/3/50230/1/50 / 400/3/50 230/1/50 / 400/3/50 400/3/50
Compressor Scroll Inverter E.V.I. Scroll Inverter E.V.I. Scroll Inverter E.V.I. Scroll Inverter E.V.I.Refrigerant R410A R410A R410A R410AMeasures LxAxP mm 1406x908x550 1406x908x550 1406x908x550 1406x908x550Weight kg 180 180 180 180
MADE IN ITALY
KITA Templari Si versions are monoblock reversible air to water heat pumps with high efficiency, twin rotary compressor with inverter. They are adapted to satisfy the needs for low heating demand buildings.
OPTIONAL FOR KITA Si MONOBLOCK ON REQUEST (to be requested at the order)
HP Air/Water inverter
DOMESTIC HOT WATER PRODUCTION IN PRIORITY
WEB REMOTE CONTROLL
CERTIFICATE OF MANUFACTURING PROCESS
CLIMATE COMPENSATION
MULTI-KITA MANAGEMENT
HEATING AND COOLING
HIGH EFFICIENCY ELETRONIC PUMPS
ELECTRICITY EXPANSION VALVE WITH ELECTRONIC CONTROLLED
REFRIGERANT GAS R410A
HIGH EFFICIENCY EC FAN
MANAGEMENT INVERTER
* The heat pump is supplied without gas. The adjustment of the gas price will be monthly based on market quotations.
KITA Si Monoblock
ArticleK-TOUCHTouch panel 7’’ included withpredisposition to internetconnection for remot controlK-LEGS-SMSee proper section at pag. 18
FRONT GRIDfrontal grid to cover the fan
PROTECTION-GRID-SSee proper section at pag. 18
G-CALSee proper section at pag. 18
G-ACSSee proper section at pag. 18
ArticlePREWIRED CABLE MONOBLOCKSee proper section at pag. 1810m20m30mK-RSCSee proper section at pag. 18
K-AVTSee proper section at pag. 18PMP-DIRECT(In case of “no-puffer” mode, if high water flow rate is needed)
K-AVSPEC/PSee proper section at pag. 18
SCROLL SMART INJECTION COMPRESSOR
With 7’’ touch panel.
7
HP Air/Water inverter
MADE IN ITALY
KITA Templari Si versions are split reversible air to water heat pumps with high efficiency, twin rotary compressor with inverter. They are adapted to satisfy the needs for low heating demand buildings.
Model U.M. Si / Si 3phase Split
Si Cold / Si Cold 3phase Split
Si Plus / Si Plus 3phase Split
Si Plus Cold Split / Si Plus Cold 3phase Split
Heating capacity (A7/W35) kW 10,00 10,00 12,48 12,00Cooling capacity (A35/W18) kW 8,75 8,75 10,79 10,79Supply V/Ph/Hz 230/1/50 / 400/3/50 230/1/50 / 400/3/50 230/1/50 / 400/3/50 400/3/50Compressor Scroll Inverter E.V.I. Scroll Inverter E.V.I. Scroll Inverter E.V.I. Scroll Inverter E.V.I.Refrigerant R410A R410A R410A R410AMeasures LxAxP
Ext. Un. mm 1406x908x550 1406x908x550 1406x908x550 1406x908x550Int. Un. 550x878.4x208 550x878.4x208 550x878.4x208 550x878.4x208
Weight Ext. Un. kg 160 160 160 160Int. Un. 50 50 50 50
OPTIONAL FOR KITA Si SPLIT ON REQUEST (to be requested at the order)
DOMESTIC HOT WATER PRODUCTION IN PRIORITY
WEB REMOTE CONTROLL
CERTIFICATE OF MANUFACTURING PROCESS
CLIMATE COMPENSATION
MULTI-KITA MANAGEMENT
HEATING AND COOLING
HIGH EFFICIENCY ELETRONIC PUMPS
ELECTRICITY EXPANSION VALVE WITH ELECTRONIC CONTROLLED
REFRIGERANT GAS R410A
HIGH EFFICIENCY EC FAN
MANAGEMENT INVERTER
* The heat pump is supplied without gas. The adjustment of the gas price will be monthly based on market quotations.
KITA Si Split
ArticlePREWIRED CABLE SPLITSet of 4 cables with pre-wired connectors on one side. Available with the following length:10m20m30m
MANDATORY ACCESSORIES
ArticleG-ACS-SSee proper section at pag. 18K-RSCSee proper section at pag. 18
PMP-DIRECT(In case of “no-puffer” mode, if high water flow rate is needed)
K-AVSPEC/PSee proper section at pag. 18
ArticleK-TOUCHTouch panel 7’’ included withpredisposition to internetconnection for remot controlK-LEGS-SMSee proper section at pag. 18
FRONT GRIDfrontal grid to cover the fan
PROTECTION-GRID-SSee proper section at pag. 18
G-CALSee proper section at pag. 18
SCROLL SMART INJECTION COMPRESSOR
With 7’’ touch panel.
8
KITA Templari Mi versions are monoblock reversible air to water heat pumps with high efficiency, Scroll Smart Injection compressor with inverter.
HP Air/Water inverter
OPTIONAL FOR KITA Mi MONOBLOCK ON REQUEST (to be requested at the order)
DOMESTIC HOT WATER PRODUCTION IN PRIORITY
WEB REMOTE CONTROLL
CERTIFICATE OF MANUFACTURING PROCESS
SCROLL SMART INJECTION COMPRESSOR
CLIMATE COMPENSATION
MULTI-KITA MANAGEMENT
HEATING AND COOLING
HIGH EFFICIENCY ELETRONIC PUMPS
DOUBLE ELECTRICITY EXPANSION VALVE WITH ELECTRONIC CONTROLLED
REFRIGERANT GAS R410A
HIGH EFFICIENCY EC FAN
MANAGEMENT INVERTER
* The heat pump is supplied without gas. The adjustment of the gas price will be monthly based on market quotations.
KITA Mi Monoblock
MADE IN ITALY
ArticleK-TOUCHTouch panel 7’’ included withpredisposition to internetconnection for remot controlK-LEGS-SMSee proper section at pag. 18
FRONT GRIDfrontal grid to cover the fan
PROTECTION-GRID-MSee proper section at pag. 18
G-CALSee proper section at pag. 18
G-ACSSee proper section at pag. 18
ArticlePREWIRED CABLE MONOBLOCKSee proper section at pag. 1810m20m30mK-RSCSee proper section at pag. 18
K-AVTSee proper section at pag. 18PMP-DIRECT(In case of “no-puffer” mode, if high water flow rate is needed)
FLOWGRIDSee proper section at pag. 18
SILENZIO-KITSee proper section at pag. 18
K-AVSPEC/PSee proper section at pag. 18
With 7’’ touch panel.
Model U.M. Mi / Mi 3phase Mi Cold / Mi Cold 3phase
Mi Plus / Mi Plus 3phase
Mi Plus Cold 3phase
Heating capacity (A7/W35) kW 16,60 15,00 20,20 18,00Cooling capacity (A35/W18) kW 11,78 11,78 16,37 16,37Supply V/Ph/Hz 230/1/50 / 400/3/50 230/1/50 / 400/3/50 230/1/50 / 400/3/50 400/3/50Compressor Scroll Inverter E.V.I. Scroll Inverter E.V.I. Scroll Inverter E.V.I. Scroll Inverter E.V.I.Refrigerant R410A R410A R410A R410AMeasures LxAxP mm 1591x1012x546 1591x1012x546 1591x1012x546 1591x1012x546Weight kg 220 220 220 220Price*
9
HP Air/Water inverter
KITA Templari Mi versions are split reversible air to water heat pumps with high efficiency, Scroll Smart Injection compressor with inverter.
OPTIONAL FOR KITA Mi SPLIT ON REQUEST (to be requested at the order)
DOMESTIC HOT WATER PRODUCTION IN PRIORITY
WEB REMOTE CONTROLL
CERTIFICATE OF MANUFACTURING PROCESS
SCROLL SMART INJECTION COMPRESSOR
CLIMATE COMPENSATION
MULTI-KITA MANAGEMENT
HEATING AND COOLING
HIGH EFFICIENCY ELETRONIC PUMPS
DOUBLE ELECTRICITY EXPANSION VALVE WITH ELECTRONIC CONTROLLED
REFRIGERANT GAS R410A
HIGH EFFICIENCY EC FAN
MANAGEMENT INVERTER
ArticlePREWIRED CABLE SPLITSet of 4 cables with pre-wired connectors on one side. Available with the following length:10m20m30m
MANDATORY ACCESSORIES* The heat pump is supplied without gas. The adjustment of the gas price will be monthly based on market quotations.
KITA Mi Split
MADE IN ITALY
ArticleK-TOUCHTouch panel 7’’ included withpredisposition to internetconnection for remot controlK-LEGS-SMSee proper section at pag. 18
FRONT GRIDfrontal grid to cover the fan
PROTECTION-GRID-MSee proper section at pag. 18
G-CALSee proper section at pag. 18G-ACS-SSee proper section at pag. 18
ArticleK-RSCSee proper section at pag. 18
PMP-DIRECT(In case of “no-puffer” mode, if high water flow rate is needed)
FLOWGRIDSee proper section at pag. 18
SILENZIO-KITSee proper section at pag. 18
K-AVSPEC/PSee proper section at pag. 18
With 7’’ touch panel.
Model U.M. Mi Split / Mi 3phase Split
Mi Cold Split / Mi Cold 3phase Split
Mi Plus Split/ Mi Plus 3phase Split
Mi Plus Cold 3phase Split
Heating capacity (A7/W35) kW 16,60 15,00 20,20 18,00Cooling capacity (A35/W18) kW 11,78 11,78 16,37 16,37Supply V/Ph/Hz 230/1/50 / 400/3/50 230/1/50 / 400/3/50 230/1/50 / 400/3/50 400/3/50Compressor Scroll Inverter E.V.I. Scroll Inverter E.V.I. Scroll Inverter E.V.I. Scroll Inverter E.V.I.Refrigerant R410A R410A R410A R410AMeasures LxAxP
Ext. Un. mm 1591x1012x546 1591x1012x546 1591x1012x546 1591x1012x546Int. Un. 550x878.4x208 550x878.4x208 550x878.4x208 550x878.4x208
Weight Ext. Un. kg 200 200 200 200Int. Un. 50 50 50 50
Price*
10
MADE IN ITALY
HP Air/Water inverter
OPTIONAL FOR KITA L MONOBLOCK ON REQUEST (to be requested at the order)
DOMESTIC HOT WATER PRODUCTION IN PRIORITY
WEB REMOTE CONTROLL
CERTIFICATE OF MANUFACTURING PROCESS
SCROLL SMART INJECTION COMPRESSOR
CLIMATE COMPENSATION
MULTI-KITA MANAGEMENT
HEATING AND COOLING
HIGH EFFICIENCY ELETRONIC PUMPS
DOUBLE ELECTRICITY EXPANSION VALVE WITH ELECTRONIC CONTROLLED
REFRIGERANT GAS R410A
HIGH EFFICIENCY EC FAN
MANAGEMENT INVERTER
KITA L Monoblock
Available with 7’’touch panel.
ArticoloK-TOUCHTouch panel 7’’ included withpredisposition to internetconnection for remot controlK-LEGS-SMSee proper section at pag. 18
PROTECTION-GRID-LSee proper section at pag. 18
G-CALSee proper section at pag. 18G-ACSSee proper section at pag. 18K-RSCSee proper section at pag. 18
PREWIRED CABLE MONOBLOCKSee proper section at pag. 1810m20m30m
ArticoloK-AVTSee proper section at pag. 18FLOWGRIDSee proper section at pag. 18
FAN-910See proper section at pag. 18
SILENZIO-KITSee proper section at pag. 18
K-AVSPEC/PSee proper section at pag. 18
KITA Templari L versions are monoblock reversible air to water heat pumps with high efficiency, Scroll Smart Injection compressor with inverter.
Model U.M. L33 L42 L66 L ColdHeating capacity (A7/W35) kW 25,50 31,90 35,00 35,00Cooling capacity (A35/W18) kW 21,80 26,90 32,50 32,50Supply V/Ph/Hz 400/3/50 400/3/50 400/3/50 400/3/50Compressor Scroll Inverter E.V.I. Scroll Inverter E.V.I. Scroll Inverter E.V.I. Scroll Inverter E.V.I.Refrigerant R410A R410A R410A R410AMeasures LxAxP mm 1791x1257x641 1791x1257x641 1791x1257x641 1791x1257x641Weight kg 280 280 280 280
11
MADE IN ITALY
HP Air/Water inverter
KITA Templari L versions are split reversible air to water heat pumps with high efficiency, Scroll Smart Injection compressor with inverter.
OPTIONAL FOR KITA L SPLIT ON REQUEST (to be requested at the order)
DOMESTIC HOT WATER PRODUCTION IN PRIORITY
WEB REMOTE CONTROLL
CERTIFICATE OF MANUFACTURING PROCESS
SCROLL SMART INJECTION COMPRESSOR
CLIMATE COMPENSATION
MULTI-KITA MANAGEMENT
HEATING AND COOLING
HIGH EFFICIENCY ELETRONIC PUMPS
DOUBLE ELECTRICITY EXPANSION VALVE WITH ELECTRONIC CONTROLLED
REFRIGERANT GAS R410A
HIGH EFFICIENCY EC FAN
MANAGEMENT INVERTER
ArticlePREWIRED CABLE SPLITSet of 4 cables with pre-wired connectors on one side. Available with the following length:10m20m30m
MANDATORY ACCESSORIES* The heat pump is supplied without gas. The adjustment of the gas price will be monthly based on market quotations.
KITA L Split
Available with 7’’touch panel.
ArticoloK-TOUCHTouch panel 7’’ included withpredisposition to internetconnection for remot controlK-LEGS-SMSee proper section at pag. 18
PROTECTION-GRID-LSee proper section at pag. 18
G-CALSee proper section at pag. 18G-ACS-SSee proper section at pag. 18
ArticoloK-RSCSee proper section at pag. 18
FLOWGRIDSee proper section at pag. 18
PMP-DIRECT(In case of “no-puffer” mode, if high water flow rate is needed)FAN-910See proper section at pag. 18
SILENZIO-KITSee proper section at pag. 18
K-AVSPEC/PSee proper section at pag. 18
Model U.M. L33 Split L42 Split L66 Split L Cold SplitHeating capacity (A7/W35) kW 25,50 31,90 35,00 35,00Cooling capacity (A35/W18) kW 21,80 26,90 32,50 32,50Supply V/Ph/Hz 400/3/50 400/3/50 400/3/50 400/3/50Compressor Scroll Inverter E.V.I. Scroll Inverter E.V.I. Scroll Inverter E.V.I. Scroll Inverter E.V.I.Refrigerant R410A R410A R410A R410AMeasures LxAxP Ext. Un. mm 1791x1257x641 1791x1257x641 1791x1257x641 1791x1257x641
Int. Un. 550x878.4x208 550x878.4x208 550x878.4x208 550x878.4x208Weight Ext. Un. kg 260 260 260 260
Int. Un. 50 50 50 50
12
* Front grid supplied as optional
MADE IN ITALY
HP Air/Water inverter
DOMESTIC HOT WATER PRODUCTION IN PRIORITY
WEB REMOTE CONTROLL
CERTIFICATE OF MANUFACTURING PROCESS
SCROLL SMART INJECTION COMPRESSOR
CLIMATE COMPENSATION
MULTI-KITA MANAGEMENT
HEATING AND COOLING
HIGH EFFICIENCY ELETRONIC PUMPS
DOUBLE ELECTRICITY EXPANSION VALVE WITH ELECTRONIC CONTROLLED
REFRIGERANT GAS R410A
HIGH EFFICIENCY EC FAN
MANAGEMENT INVERTER
* The heat pump is supplied without gas. The adjustment of the gas price will be monthly based on market quotations.*K-RSC and K-AVT included in the price.
KITA Li PlusMonoblockKITA Templari Li Plus versions are monoblock reversible air to water heat pumps with high efficiency, Scroll Smart Injection compressor with inverter.
Available with 7’’touch panel.
Model U.M. Li PlusHeating capacity (A7/W35) kW 46,50Cooling capacity (A35/W18) kW 42,25Supply V/Ph/Hz 400/3/50Compressor Scroll Inverter E.V.I.Refrigerant R410AMeasures LxAxP mm 2000x1341x750Weight kg 320
ArticleK-TOUCHTouch panel 7’’ included withpredisposition to internetconnection for remot controlG-CALSee proper section at pag. 18G-ACSSee proper section at pag. 18PREWIRED CABLE MONOBLOCKSee proper section at pag. 1810m20m30m
ArticleFLOWGRIDSee proper section at pag. 18
K-AVSPEC/PSee proper section at pag. 18
*FRONT GRID Li PLUSFrontal grid to cover the fan
PROTECTION-GRID-Li PLUSRear grid
OPTIONAL FOR KITA Li Plus MONOBLOCK ON REQUEST (to be requested at the order)
* if used in combination with glycole specify if ethylene or propylene
ArticleCirculation pump for heating / cooling Wilo brand model Yonos Para High Flow 30/12, 180mm spacing. Maximum power consumpton 305 W.Circulation pump for heating / cooling Wilo brand model Yonos MAXO 40/0,5-16 PN6/10 250mm spacing (3 power steps) maximum power 800w W.Circulation pump for heating / cooling DAB brand model KI 30/90 maximum power consumpton 1400 W *
MANDATORY ACCESSORIES
13
* Front grid supplied as optional
MADE IN ITALY
HP Air/Water inverter
KITA Templari Li Plus versions are split reversible air to water heat pumps with high efficiency, Scroll Smart Injection compressor with inverter.
DOMESTIC HOT WATER PRODUCTION IN PRIORITY
WEB REMOTE CONTROLL
CERTIFICATE OF MANUFACTURING PROCESS
SCROLL SMART INJECTION COMPRESSOR
CLIMATE COMPENSATION
MULTI-KITA MANAGEMENT
HEATING AND COOLING
HIGH EFFICIENCY ELETRONIC PUMPS
DOUBLE ELECTRICITY EXPANSION VALVE WITH ELECTRONIC CONTROLLED
REFRIGERANT GAS R410A
HIGH EFFICIENCY EC FAN
MANAGEMENT INVERTER
* The heat pump is supplied without gas. The adjustment of the gas price will be monthly based on market quotations.*K-RSC and K-AVT included in the price.
KITA Li PlusSplit
Available with 7’’touch panel.
* if used in combination with glycole specify if ethylene or propylene
Model U.M. Li Plus SplitHeating capacity (A7/W35) kW 46,50Cooling capacity (A35/W18) kW 42,25Supply V/Ph/Hz 400/3/50Compressor Scroll Inverter E.V.I.Refrigerant R410AMeasures LxAxP Ext. Un. mm 2000x1341x750
Int. Un. 550x878.4x208Weight Ext. Un. kg 300
Int. Un. 50
ArticleK-TOUCHTouch panel 7’’ included withpredisposition to internetconnection for remot controlG-CALSee proper section at pag. 18
G-ACS-SSee proper section at pag. 18FLOWGRIDSee proper section at pag. 18
ArticleK-AVSPEC/PSee proper section at pag. 18
*FRONT GRID Li PLUSFrontal grid to cover the fan
PROTECTION-GRID-Li PLUSRear grid
OPTIONAL FOR KITA Li Plus SPLIT ON REQUEST (to be requested at the order)
ArticleCirculation pump for heating / cooling Wilo brand model Yonos Para High Flow 30/12, 180mm spacing. Maximum power consumpton 305 W.Circulation pump for heating / cooling Wilo brand model Yonos MAXO 40/0,5-16 PN6/10 250mm spacing (3 power steps) maximum power 800w W.Circulation pump for heating / cooling DAB brand model KI 30/90 maximum power consumpton 1400 W *PREWIRED CABLE SPLITSet of 4 cables with pre-wired connectors on one side. Available with the following length:10m20m30m
MANDATORY ACCESSORIES
14
HP Air to Air for industrial use
Kita-Air is the ideal solution for winter and summer climate control of large environments such as stores, warehouses and industrial laboratories, greenhouses, gymnasiums, etc.The outside unit is equipped with inverter scroll compressor with steam injection, and it can operates up to external temperatures of -32 ° C.The direct exchange between the two units through refrigerant optimizes performance both as a heat pump or as chiller.The indoor unit is also made with a special fan to minimize the noise impact within the environment in which it is situated.
TECHNICAL FEATURES
MADE IN ITALY
Model U.M. AIRHeating capacity (A out 7/A in 20) kW 39,00Cooling capacity (A out 35/A in 27) kW 35,00Supply V/Ph/Hz 400/3/50Compressor Scroll Inverter E.V.I.Refrigerant R410AMeasures LxAxP
Ext. Un. mm 1791x1257x641Int. Un. 1263x1080x774
Weight Ext. Un. kg 280Int. Un. 130
OPTIONAL FOR KITA AIR ON REQUEST(to be requested at the order)
OPTIONAL FOR KITA AIR ON REQUEST(to be requested at the order)ArticleK-AVSPEC Support brackets 20 cm of height for
ground fixing of outdoor unit
K-STF-LE Pair of brackets in L for wall mounting of outdoor unit
K-LEGS-L Couple of metal legs 25 cm high complete with anti-vibration and pipes holes, condensate drain and electrical connections. Supplied already assembled on the heat pump.
K-STF-AIR Pair of brackets in L for wall mounting of indoor unit
NO-FROST HEATER 9kW
A 9kW heating element integrated in the exchanger of the internal unit to avoid the flow of cold air during the defrost cycle
NO-FROST HEATER 13,5kW
A 13,5kW heating element integrated in the exchanger of the internal unit to avoid the flow of cold air during the defrost cycle
FLOW-GRID INT Flow Grid INT: flow grid system for acoustic limitations (-3dB) for indoor unit
FLOW-GRID EXT Flow Grid EXT: flow grid system for acoustic limitations (-3dB) for outdoor unit
ArticleK-TOUCH Touch panel 7’’included with predisposition tointernet connection for remotcontrol
* The heat pump is supplied without gas. The adjustment of the gas price will be monthly based on market quotations.
KITA AIR
Available with 7’’touch panel.
SCROLL SMART INJECTION COMPRESSOR
KITA WEB
DOUBLE ELECTRICITY EXPANSION VALVE WITH ELECTRONIC CONTROLLED
CERTIFICATE OF MANUFACTURING PROCESS
MANAGEMENT INVERTERMULTI-KITA MANAGEMENT
CLIMATE COMPENSATION
WITH SAVING FUNCTION
ENVIRONMENTALLY FRIENDLY RENEWABLE ENERGY
HEATING AND COOLING
REFRIGERANT GAS R410A
HIGH EFFICIENCY EC FAN
HEAT PUMP WITH SPLIT EXECUTION
15
HP Air to Air for industrial use
Kita-Air Cold is the ideal solution for winter and summer climate control of large environments such as stores, warehouses and industrial laboratories, greenhouses, gymnasiums, etc.The outside unit is equipped with inverter scroll compressor with steam injection, and it can operates up to external temperatures of -32 ° C.The direct exchange between the two units through refrigerant optimizes performance both as a heat pump or as chiller.The indoor unit is also made with a special fan to minimize the noise impact within the environment in which it is situated.
TECHNICAL FEATURES
MADE IN ITALY
Model U.M. AIR ColdHeating capacity (A out 7/A in 20) kW 40,00Cooling capacity (A out 35/A in 27) kW 37,00/40,00*Supply V/Ph/Hz 400/3/50Compressor Scroll Inverter
E.V.I.Refrigerant R410AMeasures LxAxP
Ext. Un. mm 1791x1257x641Int. Un. 1263x1080x774
Weight Ext. Un. kg 280Int. Un. 130
OPTIONAL FOR KITA AIR COLD ON REQUEST(to be requested at the order)
OPTIONAL FOR KITA AIR COLD ON REQUEST(to be requested at the order)ArticleK-AVSPEC Support brackets 20 cm of height for
ground fixing of outdoor unit
K-STF-LE Pair of brackets in L for wall mounting of outdoor unit
K-LEGS-L Couple of metal legs 25 cm high complete with anti-vibration and pipes holes, condensate drain and electrical connections. Supplied already assembled on the heat pump.
K-STF-AIR Pair of brackets in L for wall mounting of indoor unit
NO-FROST HEATER 9kW
A 9kW heating element integrated in the exchanger of the internal unit to avoid the flow of cold air during the defrost cycle
NO-FROST HEATER 13,5kW
A 13,5kW heating element integrated in the exchanger of the internal unit to avoid the flow of cold air during the defrost cycle
FLOW-GRID INT Flow Grid INT: flow grid system for acoustic limitations (-3dB) for indoor unit
FLOW-GRID EXT
Flow Grid EXT: flow grid system for acoustic limitations (-3dB) for outdoor unit
KIT BOOSTER Bigger valve to increase the power in chiller mode (from 37 to 40 kW)
ArticleK-TOUCH Touch panel 7’’included with predisposition tointernet connection for remotcontrol
* With booster Kit (optional).** The heat pump is supplied without gas. The adjustment of the gasprice will be monthly based on market quotations.
KITA AIR Cold
Available with 7’’touch panel.
SCROLL SMART INJECTION COMPRESSOR
KITA WEB
DOUBLE ELECTRICITY EXPANSION VALVE WITH ELECTRONIC CONTROLLED
CERTIFICATE OF MANUFACTURING PROCESS
MANAGEMENT INVERTERMULTI-KITA MANAGEMENT
CLIMATE COMPENSATION
WITH SAVING FUNCTION
ENVIRONMENTALLY FRIENDLY RENEWABLE ENERGY
HEATING AND COOLING
REFRIGERANT GAS R410A
HIGH EFFICIENCY EC FAN
HEAT PUMP WITH SPLIT EXECUTION
16
HP Air to Air for industrial use
Kita-Air 45 is the ideal solution for winter and summer climate control of large environments such as stores, warehouses and industrial laboratories, greenhouses, gymnasiums, etc.The outside unit is equipped with inverter scroll compressor with steam injection, and it can operates up to external temperatures of -32 ° C.The direct exchange between the two units through refrigerant optimizes performance both as a heat pump or as chiller.The indoor unit is also made with a special fan to minimize the noise impact within the environment in which it is situated.
TECHNICAL FEATURES
MADE IN ITALY
Model U.M. AIR PlusHeating capacity (A out 7/A in 20) kW 46,70Cooling capacity (A out 35/A in 27) kW 37,80Supply V/Ph/Hz 400/3/50Compressor Scroll Inverter E.V.I.Refrigerant R410AMeasures LxAxP
Ext. Un. mm 2000x1341x750Int. Un. 1254x1100x700
Weight Ext. Un. kg 320Int. Un. 140
OPTIONAL FOR KITA XL ON REQUEST(to be requested at the order)
OPTIONAL FOR KITA AIR PLUS ON REQUEST(to be requested at the order)Article
K-TOUCH Touch panel 7’’ included withpredisposition to internet connection forremot control
K-AVSPEC Support brackets 20 cm of height for ground fixing of outdoor unit
K-STF-AIR Pair of brackets in L for wall mounting of indoor unit
FLOW-GRID INT Flow Grid INT: flow grid system for acoustic limitations (-3dB) for indoor unit
FLOW-GRID EXT Flow Grid EXT: flow grid system for acoustic limitations (-3dB) for outdoor unit*FRONT GRID Li PLUSFrontal grid to cover the fan
PROTECTION-GRID-Li PLUSRear grid
ArticleK-TOUCH Touch panel 7’’included with predisposition tointernet connection for remotcontrol
* The heat pump is supplied without gas. The adjustment of the gas price will be monthly based on market quotations.
KITA AIR Plus
Available with 7’’touch panel.
SCROLL SMART INJECTION COMPRESSOR
KITA WEB
DOUBLE ELECTRICITY EXPANSION VALVE WITH ELECTRONIC CONTROLLED
CERTIFICATE OF MANUFACTURING PROCESS
MANAGEMENT INVERTERMULTI-KITA MANAGEMENT
CLIMATE COMPENSATION
WITH SAVING FUNCTION
ENVIRONMENTALLY FRIENDLY RENEWABLE ENERGY
HEATING AND COOLING
REFRIGERANT GAS R410A
HIGH EFFICIENCY EC FAN
HEAT PUMP WITH SPLIT EXECUTION
17
Complete accessories list
KITA OPTIONAL ON REQUESTArticle DescriptionK-LEGS-SMK-LEGS-L
Couple of metal legs 25 cm high complete with anti-vibration and pipes holes, condensate drain and electrical connections. Supplied already assembled on the heat pump. For S and M series
FRONT GRID- S- M
Frontal grid to cover the fan
FRONT GRID- Li Plus
Frontal grid to cover the fan
PROTECTION GRID -S-M-L-Li Plus
Metal protection grid for evaporator on rear side. Supplied already assembled on the heat pump
G-CAL Module for integration between the heat pump and a traditional boiler or eletric heater.
G-ACS Module for management of a second temperature set point for the sanitary production. With motorized 3-way valve. Supplied not preinstalled.For KITA monoblock version.
G-ACS -S Module for management of a second temperature set point for the sanitary production. With preinstalled motorized 3-way valve into indoor unit.For KITA split version.
K-RSC Condensate discharge resistance (recommended for very cold areas)
K-AVSPEC Rubber feet with antivibration function and height of 20 cm.Kit includes two 60cm parts for Kita M and S or four 20 cm pieces from to Kita L.
PMP-UG Circulation pump for heating / cooling Wilo brand model Yonos Para RS25 / 7.5 PWM, step 180. Maximum power consumption 75 W. Control PWM
PMP-25/1-9 Circulation pump for heating / cooling Wilo brand model Yonos Para High Flow 30/12, step 180. Maximum power consumption 200 W.
PMP-DIRECT Increased circulation pump for heating / cooling Grundfos brand model UPMXL GEO 25 / 125C step 180, Maximum power 180 W. Control PWM.
Circulation pump for heating / cooling Wilo brand model Yonos Para High Flow 30/12, 180mm spacing. Maximum power consumpton 305 W.
Circulation pump for heating / cooling Wilo brand model Yonos MAXO 40/0,5-16 PN6/10 250mm spacing (3 power steps) maximum power 800w W.
Circulation pump for heating / cooling DAB brand model KI 30/90 maximum power consumpton 1400 W*
FLOW-GRID Silencer grid to be placed inside the fan, in order to reduce the noise of Kita units (available in different sizes for all models)
18
Complete accessories list
ACCESSORIES FOR KITA SOFTWAREArticle DescriptionSILENZIO KIT Replacement acoustic insulation.
PREWIRED CABLE MONOBLOCK
Cable kit for power supply and signal for Kita monoblock.Available in the following length:10m20m30m
PREWIRED CABLE SPLIT
Set of 4 cables with pre-wired connectors on one side. Available in the following length:10m20m30m
FAN-910 Increased fan with 910 mm diameter, for Kita-L33 and Kita-L42 units.It maximizes performance.
K-FY Y brass filter with 1“ 1/4 and plugs and 2“ body
K-AVT Vibration joints for hydraulic connection pipes for monobloc Kita versions, made with overbraid of stainless steel. Provided 2 pieces 1 “1/4 for vers. S and M, and 2 pieces 1 “1/2 series L
ACCESSORI PER SOFTWARE KITAArticle DescriptionSK CABLE Device for updating of Kita heat pumps software using your laptop connected
computer via cable.
SCHEDA.BMS Electronic card for additional serial port.
CHIAVETTA Device for updating of Kita heat pumps software.
SK UPLOAD Device for loading software in Carel mouse via computer.
* if used in combination with glycole specify if ethylene or propylene
19
K-Touch
The man-kita interface
Article DescriptionK-TOUCH Touch panel 7’’ included with predisposition to internet connection for remot controlHCC-F01 Metal frame for installation of 7 ‘’ Touch PanelHCC-F02 Installation box for wall mounting Touch Panel 7 ‘’HCC-CABLE-P Pair of rolls of 100 m cable each. Section 1mm2 for powering devices connected to the MODBUS lineHCC-CABLE-M 100 m cable for connecting MODBUS HCC cable devices
Article Description2 DISPLAY Kit composed by BMS card + display
Touch PanelThe touch panel is the heart of the system and thanks to its simple and intuitive interface it allows an easy management of the heat pump. It can be connected to internet to be managed by remote devices such as smartphones, tablets ot PCs. The control panel of the heat pump offers the advantage to check by remote control the operating parameters of the machine while it’s working, beside this it allows the management of the settings like set point regulation, timer programs, climatic curve, integration with photovoltaic system, energetic optimizer.
Analogic module
To use contemporaneously the K-Touch panel with PGD panel you should also order:
Article DescriptionDIN 0-10V Module I/O 0-10 V / MODBUS output to heat pump control / DIN rail
fixing
DIN 0-10V PRG Module I/O 0-10 V - probe input - MODBUS input / 2NC NO 250V 10Aoutput / DIN rail fixing
20
Domestic climate control
House Climate Control
The HCC kit enables MODBUS management of the Kita heat pump by integrating it with the building’s thermal system. From a single panel, thanks to additional accessories, it is possible to handle heating, cooling, dehumidification and hot water production, as well as the ability to control the temperature and humidity inside the house, pilot circulating pumps, mixing valves and zone valves. The kit can be customize according to the type of system in the building allowing to manage: up to 3 circuits with different outlet temperatures and up to 12 independent environments. The accessories that create the kit are: Touch screen panel, I/O Floor board, ROOM sensor for temperature and humidity.
Touch PanelThe Touch Panel is the heart of the system and thanks to its simple and intuitive interface it allows the management of the heat pump and any installed accessories.It can be connected to the Internet to be managed via remote devices such as smartphones, tablets or PCs.It can also be used as a control panel of the heat pump alone, which offers the advantage of being able to view and control the operating parameters of the unit in operation: setpoint management, timer programming, climatic curve, energetic optimizer, photovoltaic integration.
Room sensorsTemperature and humidity sensors communicating via MODBUS with the Touch Panel. In addition to displaying environmental information it can be used to change the setpoint of the individual environment. Are equipped with a relay for a possible direct drive of the zone valve connected with the ambient controlled by the sensor.
I/O Floor boardElectronic board that, manages the on/off of the devices that compose the building thermal system: modulating or on/off circulating pumps, mixing and zone head valves, dehumidifiers and hydronic fancoils.
21
House Climate Control
Kit per installazione del pannello a muro
This solution is necessary only if the thermal system requires to manage zones with different temperatures, mixing, circulating pumps, dehumidifiers/split.
Article DescriptionK-TOUCH Touch panel 7’’ included with predisposition to internet connection for remot controlHCC-FLOOR I/O board for the management of auxiliary componentsSCHEDA C-MIX Board to manage a mixed circuit and an high temperature circuitHCC-ROOM Ambient sensor for temperature and humidity controlHCC-CABLE-P Pair of rolls of 100 m cable each. Section 1mm2 for powering devices connected to the MODBUS lineHCC-CABLE-M 100 m cable for connecting MODBUS HCC cable devicesSCHEDA.BMS Scheda elettronica per porta seriale aggiuntiva
To use contemporaneously the K-Touch panel with PGD panel you should also order:2 DISPLAY Kit composed by BMS card + display
Article DescriptionHCC-F01 Metal frame for installation of 7‘’ Touch PanelHCC-F02 Installation box for wall mounting Touch Panel 7‘’
1- Touch panel to manage Kita heat pump and ROOM sensors to control environments andI/O FLOOR
22
Hidronic fancoils compatible with HCC system.Fancoil
House Climate Control
HIGH WALL CapacityArticle Description Cooling
(watt) (7-12° C)Heating(watt) ( 50°C)
FNC-HW 400DC Inverter High Wall fancoil with electronic on board and remote control
1140 w 1610 wFNC-HW 600 1620 w 2350 wFNC-HW 800 2340 w 3250 w
• Prices include Inverter control pcb and remote control• Prices are for products without accessories like, connection pipe, wall pad thermostat• On demand, some accessories (see following paragraphs) can be factory mounted without
any extra cost
• Standard Water connection on left side and electric connection on right side• Standard color is silver or white
FLOOR STANDING - FULL FLAT 2/4 PIPES Connection CapacityArticle Description Cooling
(watt) (7-12° C)Heating(watt) ( 50°C)
FNC-FS 200DC Inverter Floor standing fancoil FULL FLAT design with electronic onboard
830 w 1090 wFNC-FS 400 1760 w 2350 wFNC-FS 600 2650 w 3190 wFNC-FS 800 3340 w 4100 w
• Prices include Inverter pcb, not command on board• Prices are for products without accessories like, connection pipe, wall pad thermostat• On demand, some accessories (see following paragraphs) can be factory mounted without
any extra cost
• Product could be installed with connection left or right side• For horizontal ceiling installation, the accessory “condensate collector tray” must be added• Standard color is silver or white
NANO ( small height ) - FULL FLAT 2/4 PIPES Connection CapacityArticle Description Cooling
(watt) (7-12° C)Heating(watt) ( 50°C)
FNC-NA 200DC Inverter Floor standing fancoil FULL FLAT design with electronic onboard
560 w 780 wFNC-NA 400 1140 w 1610 wFNC-NA 600 1620 w 2350 wFNC-NA 800 2340 w 3250 w
• Prices include Inverter pcb, feet, not command on board• Prices are for products without accessories like, connection pipe, wall pad thermostat• On demand, some accessories (see following paragraphs) can be factory mounted without
any extra cost
• Product could be installed with connection left or right side• Only Vertical installation are admitted• Standard color is silver or white
BATH (High height ) - FULL FLAT 2 PIPES Connection CapacityArticle Description Cooling
(watt) (7-12° C)Heating(watt) ( 50°C)
FNC-BT 200 DC Inverter High Wall fancoil with electronic on board and remote control
2340 w 3250 w
• Prices include Inverter control pcb and remote control• Prices are for products without accessories like, connection pipe, wall pad thermostat• On demand, some accessories (see following paragraphs) can be factory mounted without
any extra cost
• Standard Water connection on right side and electric connection on left side• Standard color is silver or white• Only VERTICAL (wall) installation is allowed
23
Multikita
ALL THE CONTROL YOU NEED
* Each of the units connected to the multikita system must be equipped with a BMS board to be controlled by the main panel.
The Multikita system is the solution developed by Templari to supervise and integrate the power of multiple heat pumps on a single circuit. It’s the ideal solution for condos and commercial buildings in general.
Through a wide 7” touch screen panel it’s possible to coordinate and manage up to 6 Kita units thanks to a simple and intuitive graphic.
The software using the only probes installed in the main heat pump calculates the total request and divides it equally to all the units connected to the system. The Multikita is also able to manage the domestic hot water production when this option is needed.
The system is also really easy to configure, the user will only have to set some simple parameters and the Multikita will do the rest completing the configuration by itself.The interface simple and intuitive with a few touches allows to set the parameters.
To make the Multikita even more flexible and easy to manage, Templari has implemented the remote management option developed to control the system over the internet with the most common devices: Computer\Tablet\Smartphone.
Article DescriptionMKT 7‘‘ touch screen display panel including one of the below frames:HCC-F01 Metal frame for installation of 7‘’ Touch PanelHCC-F02 Installation box for wall mounting Touch Panel 7‘’SCHEDA.BMS Electronic card for additional serial port. It allows simultaneous use of both the HCC touch panel and the base
PGD1 panel of which the heat pump is supplied as standard.*
24
DHW Production module
TMP-RAPID ie 40 is an instantaneous domestic hot water production module that uses the working principle of a stainless steel plates exchanger, that finds a wide use if coupled with buffer tanks.The setting of the domestic hot water outlet temperature (secondary side) happens with the modulation of the primary circuit flow rate through a variable flow pump controlled by MFWC controller (PWM control). The system, which works with a low primary temperature, finds a wide use in thermal solar systems and in underfloor heating. ls available a DHW recirculation pump kit.
Advantages• Domestic hot water is produced on requests, so that big
accumulations are not necessary;• DHW nominal supply 40 l/min;• High performances thanks to the oversized plate
exchanger made of steel;• High reduction of water stagnation and legionella risk• Possibility to install domestic recirculation;• High efficiency circulating pump;• Quick installation and easy maintenance;• lt may be combined with every heat generator;• Complete with thermal insulation.
ie40 compactTMP-FAST
Article DescriptionTMP-FAST Mini Wilo Yonos para - Versione pensile hanging versionTMP-FAST RIC Domestic hot water recirculation system TMP-FAST ie40
25
Compact dimensions, maximum result.TMP-MINI is a DHW production module that uses the working principle of a stainless steel plate heat exchanger.The temperature of the water is managed by a thermostatic mixing valve on the primary circuit. The pump, placed on the primary circuit is activated to the signal of the flowswitch that is placed on the secondary circuit. For optimized the comfort a secondary return kit is available.TMP- MINI is designed for the installation of the heat meter 1,5mc/h 110 x ¾.
Advantages• Compact module 330x450x120 white cover ral 9010• Preassembled and tested module• Wall-hung or built-in version• Shut-off valves both on primary and secondary circuit• Reduced maintenance• Easy temperature setting• Large production of DHW• No need to balance the flow rate of the primary circuit• Modulating flow rate by the thermostatic mixing valve on
the primary circuit• Available the secondary return kit• Secondary return kit with return temperature setting• Design for the installation of the heat meter (primary
circuit).
Mini WiloTMP-MINI
Article DescriptionTMP-RAPID MINI Mini Wilo Yonos para - Hanging versionTMP-RAPID MINI RIC domestic hot water recirculation system TMP-RAPID MINI
DHW Production module
26
Hot water enamelled boilers
ENAMELLED BOILER FOR HEAT PUMPS
Carbon steel enamelled boiler for the productionand storage of domestic hot water provided byone or two Internal fixed coil heat exchangers withhigh heat exchange surface; it can be powered bythe heat pump and solar plant.
Sanitary
Material S 235 Jr vetroporcellanatoInternal protective processing Inorganic alimentary enamelling (DIN 4753.3)External protective processing Painting with anti rust and industrial glazeOperation (P max. / T max.) 8 bar / 95°CCathodic protection Magnesium anode
Upper exchanger(heat pump)
Material S 235 Jr enamelledInternal protective processing: RoughExternal protective processing Inorganic alimentary enamelling (DIN 4753.3)Typology: Fixed coil with a double parallel spiralOperation (P max. / T max.) 12 bar / 95°C
Generalcharacteristics
Capacity 300 - 1500 LtWaranty 5 yearsInsulation Rigid polyurethane + pvc: Fire resistance class B3 (DIN 4102)Reference legislation - PED 14/68/UE Art. 4 Par. 3 (Pressure equipment)
- M.D. of 6th April 2004 N.174 (suitability of materials in contact with SHW)- Directive 2009/125/CE (Energy related Products)
Technical characteristics
27
Hot water enamelled boilers
Accessories
BLR-PDC - Enamelled boiler for heat pumpsRigid Polyurethane insulation + pvc
Article Thickness (mm) ErP DHW Exchager inox (Sq.M)BLR-PDC 300 R 50 B 3,5BLR-PDC 400 R 50 B 4,5BLR-PDC 500 R 50 B 5,7BLR-PDC 600 R 50 C 5,7BLR-PDC 800 R 100 C 6BLR-PDC 1000 R 100 C 6
Stainless steel electrical resistance for waterconnection 1 “1/2 - IP 65
range thermostat 30/70 ° C and safety thermostatArticle Power (w) L (mm) SupplyHE 30 M 3000 320 ~ 230 VHE 30 T 3000 350 3 ~ 400 VHE 40 T 4000 400 3 ~ 400 VHE 50 T 5000 500 3 ~ 400 VHE 75 T 7500 700 3 ~ 400 VHE 90 T 9000 700 3 ~ 400 VHE 120 T 12000 850 3 ~ 400 V
28
Smartwarm combined thermal accumulator
Thermal accumulator for the storage of heating water produced from continuous or discontinuous heat sources; instantaneous production of Sanitary Hot Water by means of a AISI 316L stainless steel high-efficiency corrugated heatexchanger. Small sizes for domestic installations.Available with the primary lower heat exchanger.The thermal fluid contained in the external puffer and in the primary heat exchangers must operate “closed loop” (without oxygen), this to avoid corrosion.
Sanitary
Material Inox AISI 316L (1.4404)Internal protective processing Pickling and passivationExrernal protective processing Pickling and passivationTypology Corrugated fixed tube with high exchange surfaceOperation (P max. / T max.) 6 bar / 95°C
Puffer
Material S 235 JrInternal protective processing RoughExrernal protective processing Painting with anti rust and industrial glazeOperation (P max. / T max.) 3 bar / 95°C
Exchanger
Material S 235 JrInternal protective processing RoughExrernal protective processing RoughTipology Spiral fixed coilOperation (P max. / T max.) 12 bar / 95°C
Generalcharacteristics
Capacity 300 - 400 LtWarranty 5 yearsInsulation Rigid polyurethane + pvc: Fire resistance class B3 (DIN 4102)Reference legislation: - PED 14/68/UE Art. 4 Par. 3 (Pressure equipment)
- M.D. of 6th April 2004 N.174 (suitability of materials in contact with SHW)- Directive 2009/125/CE (Energy related Products)
Technical characteristics
29
Maxiwarm combined thermal accumulator
Smartwarm combined thermal accumulator
SM0W - Smartwarm combined thermal accumulatorInsulated with rigid Polyurethane 50 mm + pvc
Article ErP DHW Exchager inox (Sq.M)SMWR 300 C 3,6SMWR 400 C 3,6
MX0W - Maxiwarm combined thermal accumulator without coilRigid insulation + pvc
Article Thickness (mm) ErP DHW Exchager inox (Sq.M)MAWA 600 50 C 5,5MAWA 800 100 C 7MAWA 1000 100 C 7,5MAWA 1250 100 C 8,5MAWA 1500 100 C 10MAWA 2000 100 C 12
30
Hot Cold Storage
Thermal flywheel for the storage of technical water both hot and cold, accompanied by attacks of large size to allow the outflow of high flow capacities. Suitable for systems with heat pumps.Insulated with anti-condensing insulation with low external temperatures.The thermal fluid contained in the tank must operate “closed loop” (without oxygen), this to avoid corrosion.
Tank
Material S 235 JrInternal protective processing RoughExternal protective processing Painting with anti rust and industrial enamelOperation (P max. / T max.) 6 bar / da -10°C a +95°C
Generalcharacteristics
Capacity 200 - 2000 LtWarranty 5 yearsInsulation - Rigid polyurethane + pvc: Fire resistance class B3 (DIN 4102)
- PEXL+ Flexible polyestere +pvc: Fire resistance class B2 (DIN 4102)Reference legislation - PED 14/68/UE Art. 4 Par. 3
- Directive 2009/125/CE (Energy related Products)
Technical characteristics
ACF - Inertial storage Hot/Cold Black SteelRigid Polyurethane insulation thick. 50 mm + pvc
Article ErPACF 200 CACF 300 CACF 500 CACF 800 CACF 1000 C
For bigger capacities require estimate.Request estimate for the horizontal version.
31
CONDIZIONI DI VENDITA POMPE DI CALORE (per aziende)
Il testo di questo Certificato di Garanzia contiene le condizioni della Garanzia Commerciale riconosciuta all’acquirente di prodotti/impianti della Templari Srl; dette condizioni non pregiudicano e sono rispettose dei diritti riconosciuti al Consumatore dal D.L. 02.02 2002, n. 24 emesso in recepimento della Direttiva 1999/44/CE del Parlamento Europeo.
1. Soggetti destinatariQueste condizioni di garanzia sono rivolte esclusivamente alle ditte cheacquistano direttamente da Templari Srl.Poichè l’impianto di produzione di calore/freddo e di utilizzo dellostesso è costituito da un insieme di componenti di origine diversa scelti liberamente dalla Ditta Acquirente titolata alla loro installazione, lagaranzia si esplica limitatamente ai componenti di propria produzionee nei confronti della ditta stessa. E’ esclusa l’applicazione della Direttiva1999/44/CE; la Ditta Acquirente diventa automaticamente responsabile,secondo garanzia europea per i beni di consumo, quando questa fornisceil prodotto al proprio cliente finale e quest’ultimo non potrà produrrealcuna pretesa nei confronti di Templari srl, in quanto la ditta fornitricerimane la responsabile e titolata all’adempimento degli eventualiobblighi con l’utente finale ai sensi della normativa in vigore.
2. Durata e oggetto della garanziaLa Templari Srl garantisce i propri prodotti per vizi o difetti di fabbricazionecon espressa esclusione di ogni vizio o fatto inerente al montaggio e allamanutenzione del prodotto e al suo buon funzionamento (art. 1512 c.c.).La durata della garanzia si estende per un periodo di 2 anni (24 mesi)decorrenti dalla data di acquisto del prodotto (fa fede la data difatturazione).Gli eventuali interventi di riparazione o sostituzione non estendono ladurata della garanzia originaria che decorre sempre dalla data di acquistodel prodotto/impianto.
3. Termini e decadenzeLa garanzia decorre in ogni caso, salvo diversi accordi all’atto dellavendita, dalla data di fatturazione alla Ditta Acquirente. La garanzia havalidità solo se vi è stato il regolare pagamento della fornitura stessada parte della Ditta Acquirente. Per i prodotti/impianti ove previstol’avviamento e collaudo da parte di un CAT, la compilazione integraledel “verbale di primo avviamento” determina la continuità della validitàdella garanzia stessa. Copia di tale documento sarà fatta pervenire allaDirezione dal CAT che ha effettuato l’avviamento.E’ cura del cliente finale, al momento dell’intervento, fornire al tecnicoautorizzato:- libretto di avviamento e manutenzione” per le pompe di calore;- certificato di conformità di installazione dell’impianto a regola d’arte
redatto dall’installatore.La mancanza di uno o più di questi documenti fa decadere la garanzia. La Ditta Acquirente decade dalla garanzia se non denuncia il vizio entro 8 giorni dalla scoperta e prima del decorso del termine massimo di durata della garanzia.
4. Condizioni di validità della garanziaAffinché la presente Garanzia abbia piena validità è necessario che:• tutte le operazioni di installazione ed utilizzo del prodotto, così
come la manutenzione periodica, avvengano secondo le prescrizionie indicazioni riportate nel Manuale tecnico di installazione, uso emanutenzione;
• qualunque intervento di riparazione sia eseguito da personalequalificato, secondo i requisiti tecnico-professionali previsti dallaL. 46/90, oppure dai CAT autorizzati e che i ricambi utilizzati sianoesclusivamente quelli originali; la stessa cosa vale per gli accessoried i materiali di consumo, il cui utilizzo può infatti incidere sulleprestazione del prodotto.
5. Estensione TerritorialeIl presente certificato di garanzia è valido per tutti i prodotti acquistati edinstallati sul territorio italiano (compresi la Repubblica di San Marino ela Città del Vaticano).
6. Clausole di esclusioneNon sono coperti da garanzia tutti i componenti che dovesseromanifestare un difetto di conformità• errata installazione e/o allacciamento degli impianti, nonché
regolazione difforme da quanto previsto dai manuali di installazione,uso e manutenzione del prodotto, da parte della Ditta Acquirente oda terzi;
• usura, negligenza, trascuratezza d’uso e cattiva manutenzione daparte del consumatore o dell’installatore a causa del mancato rispettodi quanto riportatone raccomandato nei manuali di installazione, usoe manutenzione del prodotto;
• danni da trasporto, da movimentazione, ovvero da cause di forzamaggiore e circostanze che, comunque, non possono farsi risalire adazione od omissione del produttore;
• installazione o riparazione eseguita da personale non autorizzato;• uso dei prodotti diverso rispetto all’uso standard.
Pertanto, nel caso in cui, su richiesta del consumatore, sia effettuato unintervento tecnico da parte del personale dei CAT autorizzati in relazione a quanto sopra indicato, i costi dell’intervento e delle eventuali parti di ricambio saranno a totale carico del consumatore.E’ espressamente escluso dalla garanzia ogni componente dei prodotti soggetto a normale usura.
7. SpedizioniQualora, al ricevimento della merce, saranno accertati, vizi o difetti dell’unità derivanti dal trasporto, non saranno accettate lamenteletrascorsi 8 giorni dalla consegna del bene da parte del vettore e,comunque deve essere specificatamente indicata nel documento ditrasporto la dicitura “merce ritirata/accettata con riserva” e la relativadenuncia va comunicata anche al vettore nel termine di legge, tramiteraccomandata A.R., ed inviata per conoscenza a Templari srl.
8. Prestazioni in garanzia e autorizzazione al resoL’intervento in garanzia implica a insindacabile giudizio di Templari srl,la riparazione o la sostituzione delle parti difettose. A tal fine la DittaAcquirente si impegna a far eseguire presso il proprio cliente finalequelle riparazioni che Templari srl ritiene indispensabili consentendolel’accesso all’impianto.Le parti e/o i componenti sostituiti in garanzia restano di proprietà diTemplari srl alla quale devono essere restituiti franco spese; la restituzionedei prodotti difformi o difettosi deve essere preventivamente autorizzataper iscritto dal produttore.L’autorizzazione al reso non costituisce in alcun modo riconoscimentodi vizi o di difetti, che dovranno essere accertati e provati. Le eventualiprestazioni richieste dalla Ditta Acquirente per controllo, modifica,taratura o operazioni di manutenzione espressamente indicate comenon comprese in garanzia nei manuali d’uso e manutenzione dei singoliprodotti, saranno alla stessa addebitate. La garanzia non si estende innessun caso al rimborso spese di smontaggio, di montaggio o trasporto.
9. Limitazioni della responsabilità del ProduttoreTemplari Srl declina ogni responsabilità per eventuali danni che possanoderivare, in modo diretto, indiretto, a persone, animali e cose, perla mancata osservanza di tutte le prescrizioni indicate nell’appositomanuale di istruzioni d’installazione, uso e manutenzione concernenti specialmente le avvertenze in tema di installazione, uso e manutenzionedel prodotto/impianto.
10. Scadenza della GaranziaUna volta scaduto il periodo di garanzia, i costi per eventuali interventi diriparazione saranno a carico del consumatore.
11. Soluzione delle controversiePer qualsiasi controversia nascente o derivante dall’esecuzione delpresente contratto sarà competente in via esclusiva il foro di Padova.
vers. 10/07/2020
via Pitagora, 20A - 35030 Rubano(PD) - ItaliaTel. +39 049 5225929 - +39 049 8597400 - Fax +39 049 8055626www.templari.com [email protected]
T H E H E A T P U M P