Micro800® Programmable Logic Controller (PLC) Family

PUBLIC

Copyright © 2016 Rockwell Automation, Inc. All Rights Reserved. 1

Micro800® Programmable Logic Controller (PLC) Family

Dec 2016

Copyright © 2016 Rockwell Automation, Inc. All Rights Reserved. 2PUBLIC

Agenda

Overview Of Resources

Order Information

Connected Components Workbench Software Overview

Micro800 Family Overview

Value Proposition Of Micro800 System

Applications For Micro800


Micro800 Controller FamilyUsing Connected Components WorkbenchTM (CCW)

Nano PLC Micro PLC

Micro810®

Programmable

relay replacer and

timer8 A relay outputs,

Analog inputs

Micro820™

For smaller standalone

machines and remote

automation

Micro830®

For standalone

machines with motion

Pe

rfo

rma

nc

e/F

eatu

res

Micro850®

For standalone

machines with motion

and more I/O and

Ethernet connectivity.

Local I/O

Embedded

Analog I/O

12pts

20-36pts

10-88pts

24-132ptsEach controller is cost and

performance optimized for

specific applications


Micro810 AnatomySmart Relay Micro PLC, 12 pts

Embedded

12/24/120/240V power

supply models

4-ch 0-10V

10-bit analog input

(shared with DC inputs)

USB

(removable adapter)

DIN Rail or Panel Mount4 Outputs 5/8A High current relays,

24V DC Source Transistor models

LCD Display with

Memory Backup function

(removable)

Embedded 12/24/120/240V

power supply models

8 Inputs

12/24V Sink/Source,

120/240VAC


Micro810 Controller

Micro810 controller has the price of a smart relay but with the programming capabilities of a micro PLC. As part of the Micro800

PLC family, the Micro810 controller shares the same programming environment as Micro820, Micro830 and Micro850.

Embedded smart relay function blocks configured from 1.5 in. LCD and keypad

No software or program download required

Use in relay applications that require a small amount of logic (up to 4 function blocks), applications include programmable timer, lighting

control

Function blocks include Delay OFF/ON Timer, Time of Day, Time of Week, Time of Year, Counter

High current (8 A) relay outputs replaces the need for external relays

Up to 4 configurable analog input channels

Program download via USB programming port (adapter required)

Optional 1.5 in. LCD Display can be inserted onto front of controller and removed under power

Used to configure controller and to monitor I/O status

Contains memory backup function

Run/program mode switching

LCD password

LCD instruction allows LCD Display and keypad to be used as simple 4-line text display with 6 buttons available as inputs


Micro820 AnatomyFor Smaller Standalone Machines and Remote Automation Projects, 20pts

USB for program

download to controller

5 KHz PWM

(no PTO motion)

4 Analog Inputs

1 Analog Output

(0-10V)

2 Plug-ins

for Expansion

microSDTM

for Backup,

Datalog/Recipe

4-color

backlight

RS232/485

Serial port(RS-232 to Remote LCD)

Up to 4

10K Thermistor

inputs

Ethernet

ASCII Text

Built-in controller

system menu(set IP address)

IP65

Built in RTC


Micro820 Controller 20 pt

Designed for simpler standalone machines and remote automation application

Function as a remote terminal unit (RTU) for SCADA applications with support for CIP and Modbus

over serial and Ethernet communications

Embedded support for 4 thermistor temperature inputs can function as a direct digital control (DDC)

for building management systems (BMS)

Embedded 4 channel analog input and 1 channel analog output for speed or torque control

EtherNet/IPTM for Connected Components Workbench programming, RTU applications and HMI

connectivity

5 kHz PWM Output for controlling solenoids and valves

Built-in Real Time Clock (RTC) with no battery required

microSDTM slot for program transfer, data log and recipe management. The supported formats are

FAT 32/16 with maximum card size at 32 GB. The microSD card class speeds supported are Class 6

and 10 SDSC and SDHC.

Models available with removable terminal blocks for easier wiring and installation

Supports up to two plug-in modules

Optional remote 3.5 in. LCD display, which connects to controller’s embedded RS-232


Remote LCD Display

Allen-Bradley® Micro800 Remote LCD Display connects to the embedded RS-232

port and works as an essential accessory for the Micro820 controller

Used as a simple HMI with 4 or 8 lines of ASCII text

A tactile keypad with 6 programmable function keys

System menu is available in multiple languages for direct viewing and editing of

controller variables

Ethernet address of the controller can be easily set from the menu

Configurable start-up screen

4 backlight colors available, can be programmed for alarm function

Rated IP65, it is suitable for front panel mounting. It also supports DIN rail

mounting next to the controller.

USB port for program download to controller


Micro830 AnatomyFlexible Micro PLC with Simple Motion, 10/16/24/48 pts

Serial

12/24V sink/source,

120V AC input models

High Speed Inputs

(DC inputs)

Two to Five

Plug-in Slots

Support up to 3 axes of motion

with PTO

High Speed Outputs

(DC outputs)

DIN Rail or Panel Mount

12/24V sink/source,

relay output modelsRun/Program Switch

USB

RS232/485 Serial Port (non-isolated)

Optional AC Power Supply (isolated)

attaches to left side of controller

Embedded 24V DC Power Supply


Micro830 Controller

Designed for standalone machine control applications

Highly flexible and customizable - “Pay for only what you need” Supports up to 5 plug-in slots

Plug-ins customize base unit with additional digital and analog I/O, communication modules and application-specific

modules.

Expandable up to 88 digital I/O, 20 Analog I/O, 6 Serial ports.

Form factor that is based on number of I/O points being embedded in the base: 10, 16, 24, or 48 Entire family shares plug-ins and accessories.

Removable terminal blocks available on 24 pt and 48 pt models for easier wiring

Embedded Communications USB programming

Non-isolated serial port (RS232/485) for communications to HMI

CIP, Modbus RTU (Master/Slave), ASCII.

Embedded motion capabilities with up to 3 axes of motion on Transistor Output models provide High speed (100usec) interrupts - supported on DC input models, and allows as many as six 100 kHz High-Speed

Counter inputs (HSC) with PLS support.

Up to three 100 KHz Pulse Train Outputs (PTO)

Single axis moves supported via Motion Instructions

Touch Probe is for registering the exact position of an axis that is based on an asynchronous event. It is embedded in

controller hardware and so is more accurate than interrupts alone.


Micro850 AnatomyMicro PLC with Ethernet and Expansion I/O

Embedded 24V DC Power Supply

Support up to 3 axes of motion

with PTO

High-Speed Inputs and Outputs

(DC inputs/outputs)

Up to 4 Expansion I/O modules

Bus Terminator

2085-ECR

Support a maximum

of 132 I/O points

Removable terminal blocks on both

controller and expansion I/O

Up to Five

Plug-in Slots

DIN Rail or

Panel Mount

12/24V sink/source,

relay output models

Optional AC Power Supply (isolated)

attaches to left side of controller

Run/Program

Switch

USB

RS232/485

Serial Port

(non-isolated)

Ethernet


Micro850 Controller

Designed for larger standalone machine applications that require Ethernet connectivity and higher density, higher precision analog and digital I/O as compared to Micro830 controller

Equipped with same form factor, plug-in support, instruction/data size and motion capabilities as Micro830 24-pt and 48-pt controllers

All capabilities of Micro830 plus additional capabilities: Embedded Ethernet port then supports EtherNet/IP and Modbus TCP/IP Support up to four 2085 Expansion I/O modules. Expandable up to 132 digital I/O

The 2085 Expansion I/O module snaps firmly to the right side of Micro850 controller to form a solid block. This feature creates ease of installing of Micro850 and Expansion I/O onto the panel


2085 Expansion I/O for Micro850

Single (26 mm) and double wide (46 mm) form factors minimize panel space. On average 20% narrower than 1762 I/O

Attaches to the right side of controller and locks securely into place – robust and easy to mount

Digital I/O, Analog I/O, TC/RTD modules


Micro800 Plug-In Modules

Plug-in Types

• Analog input/output (2-channel / 4-channel, non-isolated)

• Up to 20 Analog inputs

• Digital I/O

• Double the amount of digital I/O without increasing footprint of controller

• Resistance Temperature Detector/Thermocouple (2-channel, non-isolated)

• Makes temperature control possible when used with PID with autotuning

• Trim Potentiometer (6-channel, analog input)

• Low-cost method of adding six analog presets for speed, position and temperature control

• Allows simple tuning or adjustment of system without PC

• Serial Port RS232/485 (isolated)

• Address even the most intensive serial communications tasks with CIP, Modbus RTU and ASCII protocol support

• Up to five additional serial ports

Change the “Personality” of the Base Unit Controller with Plug-In Modules• Extends the functionality of the controller without increasing the panel space

• Allows highly customizable hardware configurations

• Wide range of Plug-ins available for Micro820, Micro830 and Micro850 controllers

*Backup Memory with High Accuracy Real-Time Clock plug-in is not supported on Micro820 controller.

*Backup Memory with High Accuracy Real-Time Clock

Can be used to clone/update Micro800 application code.

Adds precision real-time clock function without needing to calibrate or update

DeviceNet Scanner

Enhances Micro800 communication capabilities up to 20 nodes of PowerFlex® AC drives or

CompactBlockTM LDX I/O

Reduces wiring and installation costs for larger standalone machines that have distributed

drives and I/O

Motion High-Speed Counter

Supports Touch Probe Input in hardware for exact registration of axis

Provides position verification for servo feedback and encoder feedback modes

Application-specific Plug-ins from Encompass™ Partners


DeviceNet Scanner Plug-in

1

• Physical Network

• Wire Network and Set Node Addresses

2

• Software Configuration in Connected Components Workbench

• Add one Rockwell Automation pre-configured UDFB to configure one device

3

• Auto Creation of Scan List

• Enable auto scan for nodes 1-20 (UDFB in R6, CCW in R8)

• No Network configuration needed

DeviceNetTM Scanner Plug-in

Simplified DeviceNet set up – “Easy as 123”

All configuration uses Connected Components Workbench - No other software required

For controlling up to 20nodes

Compatible with all DeviceNet media

Reduces installation costs


Comparison between Expansion I/O Versus Plug-ins

Features Plug-In Expansion I/O

Terminal Block Non-removable Removable Terminal Block

Input Isolation Non-isolated analog inputs Isolated analog inputs

Analog resolution and accuracy 12-bit resolution for Analog I/O

1% accuracy for Analog I/O

1degC accuracy for TC/RTD

14-bit resolution for Inputs

12-bit resolution for Output

0.1% accuracy for Analog I/O

0.5degC accuracy for TC/RTD

Filter times Fixed 50/60Hz filter Configurable filter times

I/O density 2 pts to 8 pts 4 pts to 32 pts

Footprint No increase in controller footprint Width of controller increases with Expansion I/O

Different variety of modules Isolated Serial port, Trimpot,

Memory Back-up, RTC, DeviceNet, HSC, Digital I/O,

Analog I/O, Encompass Partner's Product

Digital and Analog I/O modules only

Customer gets better I/O performance for Expansion I/O


Micro800 Optional Power Supply

Output is regulated 1.6A@24VDC for Micro800 controllers

Typically used with smaller systems when Customer does not

have their own existing 24V DC power supply or

Used to provide isolated 24V DC power for noisy environments

Typically used with Micro820, Micro830 and Micro850 controllers:

Micro820/830/850 do not have integrated AC to DC power supply

Catalog number

2080-PS120-240VAC Power supply can be attached optionally

to left side of controller base unit – all

wiring is external


Agenda


Order Information






Connected Components WorkbenchSingle Software for All Your Component Devices

Configure

Program

Visualize


Connected Components Workbench Software

Easy to Configure

Single software package for all your essential components reduces time to create and maintain your machine design

PowerFlex® drive wizards make configuration easier

Guardmaster® configurable safety relay editor makes safety logic intuitive

Easy to Program

Micro800 controller supports your choice of IEC-61131 PLC programming languages (Ladder Diagram, Function Block Diagram, Structured

Text) to suit your application

User-defined function blocks speed machine development

Standard PLCopen® motion instructions with PTO Motion Axis and HSC Feedback Axis removes the complexity from simple positioning

applications

Easy to Visualize

Micro800 variable names can be referenced directly by HMI tags, which result in less complexity and time-saving benefits

Lower the cost to Design, Develop and Deliver your machine


Standard Edition Developer Edition

Price Free for download or on DVD Contact local distributor

or Rockwell

Automation® Sales

Common environment to configure all your

common devices

Yes Yes

Project import/export Yes Yes

Archive manager No Yes

Micro800 Programming

- IEC 61131-3 ladder diagram, function block

diagram, structured text

Yes Yes

- User-defined function block Yes Yes

- Run mode change No Yes

- User-defined data types No* Yes

- Spy List Used Existing lists New lists can be created

- Intellectual Property Protection No** Yes

* – requires Developer Edition to create new data types, which

can be used in Standard Edition.

**- requires Developer Edition to create passwords, which can

be used in Standard Edition.

WorkbenchComparison of Standard versus Developer Editions

Developer Edition is for machine developers to reduce their time to Design, Develop and Deliver

Standard Edition is meant to be installed on many Personal Computers (PCs) to help ensure availability for simple debugging and configuring devices


Micro800 Release 10.00 Overview

Design Time Performance Improvements

Build/Download/Upload times decreased by 36% to 58%, Run Mode Change times decreased by 30% to 61%

Automatic renaming of variables throughout project

Programming Enhancements

Indirect Bit Addressing using Variable

User-Defined Functions – simplified UDFB with reduced memory usage

Additional FIFO and PID Instructions

Enhanced Memory Diagnostics

Ladder Logic Usability Enhancements

Improved Ladder Drag and Drop

Improved Keyboard Navigation of Rungs and Instructions

Optional Module – single project for multiple machine configurations

Download Data Protection – protected variables are not overwritten during project download


Design Time Performance Increases

Build times decreased by up to 55%

Download times decreased by up to 58%

Upload times decreased by up to 36%

Results vary by project and PC


Online Change (Online Edits) Performance Increases

Run Mode Change times decreased by 30% on

average

Test Logic time decreased by up to 39%

Undo time decreased by up to 45%

Accept time decreased by up to 61%

Results vary by project and PC


Indirect Bit Addressing Using a Variable

Bits of an integer can be referenced using an index variable

Defined Words and constants also supported

Uses 8X less memory than using array of BOOL

Index data type must be SINT


Ladder Editor Drag and Drop Improved

Drag and drop of instructions with more visible drag and drop points

Similar improvement for rungs


Ladder Editor Keyboard Improvements

More intuitive arrow

key navigation of

rungs and

instructions

Control-t to toggle Boolean values when online with controller to aid in debugging


User-defined Function

User-defined Function (UDF) is a simpler version of current

User-defined Function Block (UDFB)

Targeted for simpler calculations such as converting

from Fahrenheit to Celsius

UDF does not support multiple instances BUT can use

significantly less memory than UDFB

Only one output parameter is supported

UDF is similar to Subroutine (whereas UDFB is similar to an

Add-On Instruction in Logix Designer)


Additional MicroLogix Instructions

Instructions added to aid in

MicroLogixTM migration

FIFO instructions (FFL, FFU)

PID instruction

Intuitive Parameter names

similar to MicroLogix PID

instruction


Optional Module Feature for OEMs

Target to OEM Machine Builders

who use the same controller project

for machines that have variable

amounts of I/O

No need to have 3 different projects

for small, medium, and large

machines, which vary in I/O

quantity

Similar to MicroLogix Do-Not-Fault

and Logix Inhibit Module features

Optional Module


Cross-reference Browser Delete Unused Variables

Easier to delete unused variables from cross-reference browser

No need to delete variables individually one at a time


Automatic Renaming of Variables throughout Project

Renaming variable will result in all references to the variable being

automatically renamed. Includes PanelView™ 800 Tag Mapping!

Example of renaming variable SensorA SensorAB

Program automatically updated!

Variable is renamed and …


Improved Memory Diagnostics

Embedded Project size now listed as part

of the Memory Diagnostics

Embedded Project contains Comments,

Symbolic Variable Names

Non-executable parts of the project

Aids when project does not build due to

too many comments in the project or too

many long variable names


Download Data Protection Enhancement

Data Protection helps user to prevent up to 60 variables from being overwritten during

Download and Project Restore from memory module

Micro820TM, Micro830®, Micro850®

Equivalent to the ability of MicroLogix to disable data files from being downloaded and

restore


Agenda


Order Information






Why Micro800 Controllers and Connected Components Workbench Software?

Micro800 and Connected Components Workbench software offers:

Cost-effective solution

Reduces total cost of machine

Easy to implement solutions

Easy to configure, Easy to program, Easy to visualize

Reduces machine development time, improves time to market


Flexibility, Scalability and Reuse with Micro800

Plug-in concept offers high flexibility to customize your controller to your application need

Up to 5 slots – multiple serial ports made possible.

No competitors can match the wide variety of plug-in modules that are offered in Micro800 system.

Special application plug-ins from RA Encompass Partners.

Save space.

Highly scalable. For more I/O, there are 2085 Expansion I/O modules and Compact Block LDX on DeviceNet

Up to 132 digital I/O with 2085 Expansion I/O

Additional 320 I/O with Compact Block LDX on DeviceNet

Controller Change supports reuse of project that is developed on one controller to the other


Micro800 Controllers Offer a Wide Variety of Connectivity Options Offers a wide variety of communication options for device connectivity to meet your

application needs.

Plug and play USB port makes it easy to connect CCW Programming software to

Micro800 controller. Improves efficiency during machine development and

commissioning phase.

CIP Pass-through saves time and effort while configuring your system and collecting

data

Supports CIP Symbolic and EtherNet/IP. It is ideal for communication to Logix products.

DeviceNet scanner for distributed I/O

Supports Modbus and ASCII protocols for connectivity to third-party devices.

Note: 1: Via USB adaptor (2080-USBADAPTER) 2: Via Remote LCD (2080-REMLCD)


Micro800 Component Motion Easy to Program, Cost-effective Solution

Touch probe is a low-cost method to achieve accurate position registration

HSC-Motion Plug-in supports pulse frequencies up to 250 kHz, for accurate position feedback from encoders

and servo drives

Easy motion programming. Simple to use axis configurations screens; Axis Monitor shows important

information about the status of axes; commonly used PLCopen instruction reduces learning curve


One Software for All Essential Devices

Connected Components Workbench Software offers controller programming, device configuration and HMI design editor in one software package. Improve efficiency and productivity during machine development

CCW is easy to acquire, easy to configure, easy to program

Free download for Standard Edition

Micro800Guardmaster 440C-CR30 CompactBlock LDX I/O

Kinetix® 3PowerFlex

4-series

PowerFlex

520-series

PowerFlex

7-seriesSMC™-

50SMC™

Flex

PanelView 800GuardShield™ 450L Light

Curtain


Password for Security and IP Protection

Improves security and intellectual property protection for Micro800

Supports creation of strong passwords

Controller enforces whether access is granted to controller

Supports display of protection status and user name to

determine current user

Password is encrypted in all communications with CCW

No backdoor password (If password is lost, need to update

controller!)

Password protection for UDFB in CCW Developer edition.


CCAT, Application Starter Kit and UDFB Reduces Machine Development Time Connected Component Accelerator Toolkit (CCAT) reduces the machine design and development and commissioning time of OEM

by 50%

Machine Application Starter Kit provides white paper, sample code, BOM and wiring diagram of typical Micro800 applications

Reduces machine conversion time

User Defined Function Block (UDFB) that are available at sample code library allows code reuse and reduces development time

Improves design productivity, time to market

CCAT


Summary Value Proposition for Micro800/CCW System

Greater flexibility and scalability with Micro800 Plug-in modules

Micro800 supports a wide variety of network communication options

USB port for ease of use

Micro800 component motion: easy to program, cost-effective solution

CCW is one software for all essential devices

Sample application code reduces machine development time

Password for security and IP protection

Modbus

ASCII

Micro800/CCW offers cost-effective and Easy to Implement solutions.

Helps machine builders to be competitive.


Agenda


Order Information






Micro800 Controller Catalog Nomenclature

2080 – LC50 24 Q W B

Bulletin Number

2080 = Micro800 family

Base unit

LC10 = Micro810

LC20 = Micro820

LC30 = Micro830

LC50 = Micro850

Number of digital and analog

I/O combined

Input Type

A = 110V AC or 110/220V AC

Q = 24V AC/DC

D(1) = 12V DC(1) Available for Micro810 only.

Output Type

B = 24V DC Source

V = 24V DC Sink

W = Relay

Power Supply

A(1) = 120/240V AC

B = 24V DC

D(1) = 12V DC


Micro810 Catalog

Catalog # Inputs Outputs Analog In

0-10V

(shared with

DC In)

120V AC 240V AC 24VDC/VAC 12V DC Relay 24V DC SRC

Controllers

2080-LC10-12QWB - - 8 - 4 - 4

2080-LC10-12AWA 8 - - 4 - -

2080-LC10-12QBB - - 8 - - 4 4

2080-LC10-12DWD - - - 8 4 - 4

Accessories

2080-LCD - - - - - - -

2080-USBADAPTER - - - - - - -


Micro820 Catalog

Catalog # Inputs Outputs Analog In

0-10V

(shared

with DC In)

Analog Out

0-10V

PWM

support

120V AC 240V

AC

24VDC/

VAC

Relay 24V DC

source

Controllers

2080-LC20-20QBB - - 12 - 7 4 1 1

2080-LC20-20QWB - - 12 7 - 4 1 -

2080-LC20-20AWB 8 - 4 7 - 4 1 -

2080-LC20-20QBBR - - 12 - 7 4 1 1

2080-LC20-

20QWBR

- - 12 7 - 4 1 -

2080-LC20-

20AWBR

8 - 4 7 - 4 1 -

Accessories

2080-REMLCD - - - - - - - -


Micro830 CatalogCatalog # Inputs Outputs

110V AC 24VDC/VAC Relay 24V Sink 24V Source

2080-LC30-10QWB - 6 4 - -

2080-LC30-10QVB - 6 - 4 -

2080-LC30-16AWB 10 - 6 - -

2080-LC30-16QWB - 10 6 - -

2080-LC30-16QVB - 10 - 6 -

2080-LC30-24QBB 14 - - 10

2080-LC30-24QVB - 14 - 10 -

2080-LC30-24QWB - 14 10 - -

2080-LC30-48AWB 28 - 20 - -

2080-LC30-48QBB - 28 - - 20

2080-LC30-48QVB - 28 - 20 -

2080-LC30-48QWB - 28 20 - -


Micro850 Catalog

Catalog # Inputs Outputs

110V AC 24VDC/VAC Relay 24V Sink 24V Source

2080-LC50-24AWB 14 - 10 - -

2080-LC50-24AWB 14 - 10 - -

2080-LC50-24QVB - 14 - 10 -

2080-LC50-24QWB - 14 10 - -

2080-LC50-48AWB 28 - 20 - -

2080-LC50-48QBB - 28 - - 20

2080-LC50-48QVB - 28 - 20 -

2080-LC50-48QWB - 28 20 - -


Micro800 Plug-in

Category Catalog Number Description Controller Support

Digital I/O 2080-IQ4 4-pt Digital Input, 12/24 VDC, Sink/Source, Type3

Micro820,

Micro830 and

Micro850

2080-OB4 4-pt Digital Output, 12/24 VDC, Source

2080-OV4 4-pt Digital Output, 12/24 VDC, Sink

2080-OW4I 4-pt Relay Output, Individually Isolated, 2 A

2080-IQ4OB4 8-pt Combo: 4-pt Digital Input, 12/24 VDC, Sink/Source,

Type3, and 4-pt Digital Output, 12/24 VDC, Source

2080-IQ4OV4 8-pt Combo: 4-pt Digital Input, 12/24 VDC, Sink/Source,

Type3, and 4-pt Digital Output, 12/24 VDC, Sink

Analog I/O

2080-IF4 4-ch Analog Input, 0-20mA, 0-10V, non-isolated 12 bit

2080-IF2 2-ch Analog Input, 0-20mA, 0-10V, non-isolated 12 bit

2080-OF2 2-ch Analog Output 0-20mA, 0-10V, non-isolated 12 bit

Specialty

2080-RTD2 2-ch RTD, non-isolated, ±1.0 °C

2080-TC2 2-ch TC, non-isolated, ±1.0 °C

2080-TRIMPOT6 6-ch Trimpot Analog Input

2080-MOT-HSC High-Speed Counter, 250 kHz, Differential Line Receiver, 1 Digital Output

Communications 2080-SERIALISOL RS232/485 isolated serial port

2080-DNET20 DeviceNet Scanner, 20 Nodes

Backup Memory 2080-MEMBAK-RTC Memory Backup and High Accuracy RTC Micro830 & Micro850


Micro850 Expansion I/O

Category Catalog Number Description Controller Support

Digital I/O2085-IQ16 16-pt Digital Input, 12/24 VDC, Sink/Source

Micro850

2085-IQ32T 32-pt Digital Input, 12/24 VDC, Sink/Source

2085-OV16 16-pt Digital Output, 12/24 VDC, Sink

2085-OB16 16-pt Digital Output, 12/24 VDC, Source

2085-OW8 8-pt Relay output, 2 A

2085-OW16 16-pt Relay output, 2 A

2085-IA8 8-pt 120V AC input

2085-IM8 8-pt 240V AC input

2085-OA8 8-pt 120/240 VAC output

Analog I/O2085-IF4 4-ch Analog Input, 0 mA ~ 20 mA, -10V ~ +10V, isolated, 14 bit

2085-IF8 8-ch Analog Input, 0 mA ~ 20 mA, -10V ~ +10V, isolated, 14 bit

2085-OF4 4-ch Analog Output, 0 mA ~ 20 mA, -10V ~ +10V, isolated, 12 bit

Specialty 2085-IRT4 4-ch RTD and TC, isolated, ±0.5 °C

Bus Terminator 2085-ECR End Cap Terminator


Recommended upgrade from previous releases to Release 10.00

Windows® 10 support

Micro800 ladder editor enhancements, new FIFO and PID instructions

Guardmaster 440C-CR30 function block editor enhancements

PanelView™ 800 support for Virtual Network Computing (VNC) Server, Upload

Standard Edition – free for download or order free DVD

Developer Edition – contact your local distributor or Rockwell Automation® salesperson for pricing

Individual lifetime license using FactoryTalk® Activation. Requires Tech Connect contract or toolkit to upgrade to future

releases.

OEM and Enterprise Toolkits with yearly activations are also supported

Catalog Number 9328-CCWDEVxxE

xx EN-English, PT-Portuguese, FR-French, IT-Italian, DE-German, ES-Spanish, ZH-Simplified Chinese (non-

English versions available approximately 3 months after English)

Connected Components Workbench SoftwareOrder Information

http://rockwellautomation.com/go/lit/ccws


Agenda


Order Information






Selecting Micro800 Based on Requirements

Feature Micro810 Micro820 Micro830 Micro850

Typical Application • Lighting control

• Heating and cooling

• Compressor control

• Elevator control

• Air Handling Unit

• Remote water pump

management

• Stretch wrapper

• Car Wash system

• DDC in building

management system

• Adhesive Labeler (up to 200 labels/min)

• Cartoner

• Solar panel positioning

• Sleeving machine (up to 400 sleeves/min)

• Intermittent Vertical and Horizontal form, fill,

and seal (up to 80packs/min)

• Material handling

LCD Yes (embedded LCD) Yes (Remote LCD) - -

Embedded Analog Yes (4 AI) Yes (4AI, 1AO) - -

Maximum local digital I/O pts 12 35 88 132

Plug-ins - Yes Yes Yes

Serial Port - Yes Yes Yes

Ethernet - Yes - Yes

Motion and High-Speed I/O - - Yes Yes

Expansion I/O - - - Yes

No motion/position control required

Distributed over a wide area/

over long distances

Motion/position control and more I/O

No communication to

other devices

Distributed over a wide area/

over long distances


Videos on YouTube

Watch applications using Micro800

controllers on YouTube https://www.youtube.com/playlist?list=PL3K_BigUXJ1MQJ

RCkS01CgHpEtGLmWta2

Watch Micro800 product animation and

programming videos on YouTube https://www.youtube.com/playlist?list=PL3K_BigUXJ1MH

sXuwkSGDkohhnsH3EPi1

https://www.youtube.com/playlist?list=PL3K_BigUXJ1MQJRCkS01CgHpEtGLmWta2

https://www.youtube.com/playlist?list=PL3K_BigUXJ1MHsXuwkSGDkohhnsH3EPi1


Agenda


Order Information






Resources: Micro800 and Connected Components Workbench SoftwareCategory File names/hyperlink

Documentation Micro800 PLC Family Brochure http://literature.rockwellautomation.com/idc/groups/literature/documents/br/2080-br001_-en-p.pdf

Micro810 Programmable Logic Controller Product Profile http://literature.rockwellautomation.com/idc/groups/literature/documents/pp/2080-pp001_-en-p.pdf




Micro800 Programmable Controllers Family Selection Guide http://literature.rockwellautomation.com/idc/groups/literature/documents/sg/2080-sg001_-en-p.pdf

Micro810 Programmable Controllers User Manual http://literature.rockwellautomation.com/idc/groups/literature/documents/um/2080-um001_-en-e.pdf

Micro830 and Micro850 Programmable Controllers User Manual http://literature.rockwellautomation.com/idc/groups/literature/documents/um/2080-um002_-en-e.pdf

Micro800 Product Catalog http://www.ab.com/en/epub/catalogs/12762/2181376/2416247/10769738/10770676/

Micro800 Web Page http://ab.rockwellautomation.com/Programmable-Controllers/Micro800

Micro800 Virtual Brochure http://www.ab.com/programmablecontrol/micro/micro800/get/virtualbrochure/

Micro800 Sample Code http://www.rockwellautomation.com/go/scmicro800/

Videos (YouTube) Micro800 Videos https://www.youtube.com/playlist?list=PL3K_BigUXJ1MHsXuwkSGDkohhnsH3EPi1

Software Web pagehttp://www.rockwellautomation.com/rockwellautomation/products-technologies/connected-

components/tools/workbench.page?

Connected Components Workbench R10.00 https://download.rockwellautomation.com/esd/ocx.aspx?sdrsid=S30470 (Standard Edition)

https://download.rockwellautomation.com/webupdates/enter.aspx (Developer Edition)

Connected Components Workbench R10.00 Release notes http://literature.rockwellautomation.com/idc/groups/literature/documents/rn/cc-rn001_-en-p.pdf

http://literature.rockwellautomation.com/idc/groups/literature/documents/br/2080-br001_-en-p.pdf

http://literature.rockwellautomation.com/idc/groups/literature/documents/pp/2080-pp001_-en-p.pdf




http://literature.rockwellautomation.com/idc/groups/literature/documents/sg/2080-sg001_-en-p.pdf

http://literature.rockwellautomation.com/idc/groups/literature/documents/um/2080-um001_-en-e.pdf

http://literature.rockwellautomation.com/idc/groups/literature/documents/um/2080-um002_-en-e.pdf

http://www.ab.com/en/epub/catalogs/12762/2181376/2416247/10769738/10770676/

http://ab.rockwellautomation.com/Programmable-Controllers/Micro800

http://www.ab.com/programmablecontrol/micro/micro800/get/virtualbrochure/

http://www.rockwellautomation.com/go/scmicro800/

https://www.youtube.com/playlist?list=PL3K_BigUXJ1MHsXuwkSGDkohhnsH3EPi1

http://www.rockwellautomation.com/rockwellautomation/products-technologies/connected-components/tools/workbench.page

https://download.rockwellautomation.com/esd/ocx.aspx?sdrsid=S30470

https://download.rockwellautomation.com/webupdates/enter.aspx

http://literature.rockwellautomation.com/idc/groups/literature/documents/rn/cc-rn001_-en-p.pdf


Resources: Connected Components, PanelView 800, PowerFlex, Kinetix

Category File names/hyperlink

Connected

Componentse-brochure

http://literature.rockwellautomation.com/idc/groups/multi_media/documents/multimedia/files/virtualbrochure/connected-

components/index.html

Web page www.rockwellautomation.com/go/cc

PanelView 800 Web page http://ab.rockwellautomation.com/Graphic-Terminals/2711R-PanelView-800-Graphic-Terminals

Brochure http://literature.rockwellautomation.com/idc/groups/literature/documents/br/2711r-br001_-en-p.pdf

User Manual http://literature.rockwellautomation.com/idc/groups/literature/documents/um/2711r-um001_-en-e.pdf

Product Profile http://literature.rockwellautomation.com/idc/groups/literature/documents/pp/2711r-pp001_-en-p.pdf

YouTube https://www.youtube.com/watch?v=n1OZ8eNpi6U&list=PL3K_BigUXJ1N2J6fjk0V_zCi9YpSM0-SV&index=120

PowerFlex Web Page http://ab.rockwellautomation.com/Drives/Component

User manual http://literature.rockwellautomation.com/idc/groups/literature/documents/um/22a-um001_-en-e.pdf

Kinetix 3 Web page http://ab.rockwellautomation.com/Motion-Control/Kinetix-3-Servo-Drive

Product Profile http://literature.rockwellautomation.com/idc/groups/literature/documents/pp/2071-pp001_-en-p.pdf

User manual http://literature.rockwellautomation.com/idc/groups/literature/documents/um/2071-um001_-en-p.pdf

Selection guide http://literature.rockwellautomation.com/idc/groups/literature/documents/sg/gmc-sg001_-en-p.pdf

Kinetix 300 Web page http://ab.rockwellautomation.com/Motion-Control/Kinetix-300-Servo-Drive

Product Profile http://literature.rockwellautomation.com/idc/groups/literature/documents/pp/2097-pp001_-en-p.pdf

User manual http://literature.rockwellautomation.com/idc/groups/literature/documents/um/2097-um001_-en-p.pdf

Selection guide http://literature.rockwellautomation.com/idc/groups/literature/documents/sg/gmc-sg001_-en-p.pdf

http://literature.rockwellautomation.com/idc/groups/multi_media/documents/multimedia/files/virtualbrochure/connected-components/index.html

http://www.rockwellautomation.com/go/cc

http://ab.rockwellautomation.com/Graphic-Terminals/2711R-PanelView-800-Graphic-Terminals

http://literature.rockwellautomation.com/idc/groups/literature/documents/br/2711r-br001_-en-p.pdf

http://literature.rockwellautomation.com/idc/groups/literature/documents/um/2711r-um001_-en-e.pdf

http://literature.rockwellautomation.com/idc/groups/literature/documents/pp/2711r-pp001_-en-p.pdf

https://www.youtube.com/watch?v=n1OZ8eNpi6U&list=PL3K_BigUXJ1N2J6fjk0V_zCi9YpSM0-SV&index=120

http://ab.rockwellautomation.com/Drives/Component

http://literature.rockwellautomation.com/idc/groups/literature/documents/um/22a-um001_-en-e.pdf

http://ab.rockwellautomation.com/Motion-Control/Kinetix-3-Servo-Drive


http://literature.rockwellautomation.com/idc/groups/literature/documents/um/2071-um001_-en-p.pdf

http://literature.rockwellautomation.com/idc/groups/literature/documents/sg/gmc-sg001_-en-p.pdf

http://www.rockwellautomation.com/components/connected/ccat.html


http://literature.rockwellautomation.com/idc/groups/literature/documents/um/2097-um001_-en-p.pdf

http://literature.rockwellautomation.com/idc/groups/literature/documents/sg/gmc-sg001_-en-p.pdf


Resources: Others

Category File names/hyperlink

Useful linksConnected Components Accelerator Toolkits http://www.rockwellautomation.com/components/connected/ccat.html

CrossWorks™ https://j6appsep.rockwellautomation.com/crossworks/

eCAD Works http://www.rockwellautomation.com/en/e-tools/drawings.html

Integrated Architecture® Builder http://www.rockwellautomation.com/en/e-tools/configuration.html

ProposalWorks™ http://www.rockwellautomation.com/en/e-tools/index.html#proposalworks

Knowledgebase http://www.rockwellautomation.com/knowledgebase/

Other Literature White Papers

OEM - Packaging: Labeling Machinehttp://literature.rockwellautomation.com/idc/groups/literature/documents/wp/oem-wp013_-en-p.pdf

OEM – Packaging: Automation of Intermittent VFFS

Machine Using Micro850 Programmable Controllerhttp://literature.rockwellautomation.com/idc/groups/literature/documents/wp/oem-wp011_-en-p.pdf

OEM Brochures

VFFS on CompactLogix™http://literature.rockwellautomation.com/idc/groups/literature/documents/br/oem-br044_-en-p.pdf

Ampoule Filling http://literature.rockwellautomation.com/idc/groups/literature/documents/br/oem-br046_-en-p.pdf

Pasteurizer http://literature.rockwellautomation.com/idc/groups/literature/documents/br/oem-br045_-en-p.pdf

Mix and Batch http://literature.rockwellautomation.com/idc/groups/literature/documents/br/oem-br048_-en-p.pdf

OEM Application Brochures Compilation http://literature.rockwellautomation.com/idc/groups/literature/documents/cl/oem-cl002_-en-p.pdf

http://www.rockwellautomation.com/components/connected/ccat.html

https://j6appsep.rockwellautomation.com/crossworks/

http://www.rockwellautomation.com/en/e-tools/drawings.html

http://www.rockwellautomation.com/en/e-tools/configuration.html

http://www.rockwellautomation.com/en/e-tools/index.html#proposalworks

http://www.rockwellautomation.com/knowledgebase/

http://literature.rockwellautomation.com/idc/groups/literature/documents/wp/oem-wp013_-en-p.pdf

http://literature.rockwellautomation.com/idc/groups/literature/documents/wp/oem-wp011_-en-p.pdf

http://literature.rockwellautomation.com/idc/groups/literature/documents/br/oem-br044_-en-p.pdf




http://literature.rockwellautomation.com/idc/groups/literature/documents/cl/oem-cl002_-en-p.pdf

PUBLIC

www.rockwellautomation.com

Copyright © 2016 Rockwell Automation, Inc. All Rights Reserved. 60

For More Information, Visit Micro800 on ab.com

http://ab.rockwellautomation.com/Programmable-Controllers/Micro800

Micro800® Programmable Logic Controller (PLC) Family

Documents

Transcript of Micro800® Programmable Logic Controller (PLC) Family