GT-300EL GT-600EL GT-750EL - Tadano
-
Upload
khangminh22 -
Category
Documents
-
view
1 -
download
0
Transcript of GT-300EL GT-600EL GT-750EL - Tadano
TRUCK CRANE
GT-750EL/600EL/300EL-3-E-18-3-02-86-549-B1Printed in Japan
TADANO LTD. (International Sales Division)4-12, Kamezawa 2-chome, Sumida-ku Tokyo 130-0014, JapanPhone: +81-3-3621-7750 Fax: +81-3-3621-7785http://www.tadano.com/ E-mail: [email protected]
30 METRIC TON CAPACITY
GT-300EL60 METRIC TON CAPACITY
GT-600EL75 METRIC TON CAPACITY
GT-750EL
GT-750EL
GT-600EL
GT-300EL
The GT-750EL/600EL/300EL:
High Quality We Are Proud Of
Photo: Optional model
Photo: Optional model
GT-750ELCrane capacity: 75,000 kg
5-section long boom: 47.0 m
2-staged jib: 9.0 m/14.3 m
Maximum lifting height: 47.3 m (Boom)
61.2 m (Jib)
Maximum load radius: 40.0 m (Boom)
48.0 m (Jib)
GT-600ELCrane capacity: 60,000 kg
5-section long boom: 43.0 m
2-staged jib: 9.0 m/14.3 m
Maximum lifting height: 43.4 m (Boom)
57.3 m (Jib)
Maximum load radius: 34.0 m (Boom)
44.0 m (Jib)
GT-300ELCrane capacity: 30,000 kg
4-section long boom: 34.0 m
2-staged jib: 8.5 m/14.0 m
Maximum lifting height: 34.0 m (Boom)
48.0 m (Jib)
Maximum load radius: 32.0 m (Boom)
40.0 m (Jib)
CONTENTS
CarrierTwo-person, full-width cabin
High performance engineAutomatic mechanical transmission
Cruise controlNew suspensions for the carrier
Test drive for new truck crane
CraneRounded construction boom
Two telescoping modes [Ⅰ] & [Ⅱ]Two winches with cable follower
Operator ComfortUnder slung jib
Automatic moment limiter [AML-C]Control of asymmetric extension width of outriggers
Smart Chart systemHELLO-NET
Reduce fuel consumption
WORKING RANGE & DIMENSIONSCOUNTERWEIGHT (GT-750EL)
OPTIONAL ITEMS
03
05
07
09
01 02
The GT-750EL/600EL/300EL redefines what truck cranes should be by offering enhanced safety and performance in all crane operations. The newly designed carrier also boasts refined performance, enabling it to withstand even the harshest running test conditions. Tadano has utilized years of development experience to craft this cutting-edge, Japanese-manufactured truck crane.
Photo: Optional model
State-of-the-Art Truck Cranes Crafted in Japan
03 04
Carrier
The full-sized cabin accommodates two passengers, allows comfortable traveling for the operator.
Two-person, full-width cabin
GT-750ELOverall length: approx. 14,180 mmOverall width: approx. 2,800 mmOverall height: approx. 3,740 mmMax. traveling speed: 85 km/h
GT-600ELOverall length: approx. 13,140 mmOverall width: approx. 2,800 mmOverall height: approx. 3,780 mmMax. traveling speed: 85 km/h
GT-300ELOverall length: approx. 12,620 mmOverall width: approx. 2,550 mmOverall height: approx. 3,800 mmMax. traveling speed: 85 km/h
The carrier has been newly designed, right down to the suspension, to pass long and rigorous road tests in a variety of environments and substantially improve crane mobility. The cabin has also been remodeled with features that contribute to comfortable and safe driving, such as automatic mechanical transmission.
High performance engine [EUROⅢ]
Daimler OM457LA4-cycle, turbo charged and after cooledMax. output: 260 kW {353 PS} Max. torque: 1,850 Nm {188 kgf-m}
*GT-750EL, GT-600EL
*GT-750EL, GT-600EL
*GT-300ELDaimler OM926LA4-cycle, turbo charged and after cooledMax. output: 240 kW {326 PS}Max. torque: 1,300 Nm {132 kgf-m}
Cruise controlA system that automatically controls the speed of the carrier
High-speed driving and durability performance tests for the new truck crane∙ Maximum speed test∙ Road-holding ability test∙ ABS test∙ Brake performance test∙ Road driving durability test: 15,000km
Shift lever
Gearshift switch
Sachs shock absorborsImproved ride comfort and operability.
Front: Reyco leaf-type suspensions
Featuring rubber suspension co-developed with HendricksonExtreme durability proven in the harshest environments.Improved ride comfort and maintainability.
Rear: Rubber suspension mounts
New suspensions for the carrierThe ride quality has been optimized to ensure the driver's comfort and protect the carrier.
Shifts up a gear. Switches to manual when driving in automatic.
Push forward
Switches between automatic and manual (switchable at all times).
Automatic/ManualPush to the left
Changes the shift position according to your speed when driving in manual.
Push once to the right
Shifts down a gear. Switches to manual when driving in automatic.
Pull backward
Automatic mechanical transmission
Photo: Optional model
05 06
The rounded boom is made of high tensile steel which decreases its weight while increasing its strength to realize smooth and powerful crane operation, while the high-performance AML-C assists with safe and comfortable operation.In addition, the newly developed Smart Chart expands workability into whole new areas to improve operation efficiency.
Crane
5°
25°
45°
5°
25°
45°
5°25°
45°
Both the main winch and the auxiliary winch have powerful line pull(GT-750EL: 5.6-ton, GT-600EL/300EL: 4.5-ton) and operate at high speeds for increased work efficiency.
The operator can select either of the two boom telescoping modes based on the designated job plan. This provides enhanced crane capabilities in accordance with work needs.
*GT-750EL, GT-600EL
Photo: Optional model
Mode [Ⅰ] is extension of 2nd section
only. Then synchronized extension of 3rd, 4th and 5th sections.
Mode [Ⅱ] is synchronized extension
of 3rd, 4th and 5th sections. Then 2nd section independently.
Two winches with cable follower
The rounded boom constructed of high tensile steel contributes to decreased boom weight and increased boom strength.
Rounded construction boom
The crane cabin provides improved livability and offers the operator a comfortable working environment.
Operator Comfort
The crane operating levers are of finger control type and surely and steadily respond to the operator.
Two telescoping modes [Ⅰ] & [Ⅱ]
Mode [Ⅰ] Mode [Ⅱ]
A two-stage, side up jib makes installation in narrow spaces possible.
Under slung jib (Side up type: GT-750EL, GT-600EL)
Jib installation
Maximum extension (7.0 m)
Middle 2 extension (6.5 m)
Minimum extension (2.51 m)
Middle 1 extension (4.7 m)
Maximum extension (7.0 m)
Middle 2 extension (6.5 m)
Minimum extension (2.51 m)
Middle 1 extension (4.7 m)
Maximum extension (6.2 m)
Middle 2 extension (5.8 m)
Minimum extension (2.18 m)
Middle 1 extension (4.1 m)
GT-750ELCrane capacity: 75,000 kg
5-section long boom: 47.0 m
2-staged jib: 9.0 m/14.3 m
Maximum lifting height: 47.3 m (Boom)
61.2 m (Jib)
Maximum load radius: 40.0 m (Boom)
48.0 m (Jib)
GT-600ELCrane capacity: 60,000 kg
5-section long boom: 43.0 m
2-staged jib: 9.0 m/14.3 m
Maximum lifting height: 43.4 m (Boom)
57.3 m (Jib)
Maximum load radius: 34.0 m (Boom)
44.0 m (Jib)
GT-300ELCrane capacity: 30,000 kg
4-section long boom: 34.0 m
2-staged jib: 8.5 m/14.0 m
Maximum lifting height: 34.0 m (Boom)
48.0 m (Jib)
Maximum load radius: 32.0 m (Boom)
40.0 m (Jib)
07 08
Note: HELLO-NET availability varies by situation. For detail, please contact your distributor or our sales staff in charge.
The system effectively controls the quantity of hydraulic pump discharge at the time of crane operation in response to the amount of movement applied by the operating lever.
The system controls the maximum engine speed during crane operation.
[Compared with GT-600EX]
* The above figures differ according to the type of a crane used and its operating conditions.
Fuel consumptionCO2 emissions
Eco Mode System
Reduce fuel consumptionPositive Control System
HELLO-NETThe HELLO-NET System is used to monitor crane activity straight from your computer or mobile device.You have the ability to view work history, machine position data and maintenance information.HELLO-NET provides advanced customer support between the owners' site and TADANO Group.
GPS
Satellite communications
Owner Service
Work siteGround station
TADANO
Smart Chart system
GT-750EL GT-600EL
Down
15 %max.
Down
35 %max.
An example of effects with the Smart Chart (Comparison with conventional control)
Tadano's new Smart Chart taps into a crane's full potential by expanding the rear part of the conventional circular work area into a square for increased load radius when the outriggers are extended to improve safety and efficiency.
The newly developed Smart Chart expands the working area, allowing you to get the best crane performance in any outrigger extension setup.
Smart Chart creates a new working area for you
Automatic moment limiter [AML-C]Tadano’s new AML-C is easy to use. It allows the operator to simultaneously monitor: boom angle, boom length, operating pressure of the elevating cylinder, the extension width of outriggers, slewing position, rated lifting capacity and present hook load.All of this enables the AML-C to move easily through lifting capacity changes without changing configurations and codes to make a lift.The AML-C provides both audio and visual warnings when a condition exists that will overload the crane and automatically employs our slow stop function to avoid shock loads.The AML-C with “OPERATOR” pre-set working range limits and automatic slow stop functions will assist the operator to deliver safe smooth operations.
AML lamp
When operating the crane with the asymmetric outriggers extended, the AML-C detects the extension width of all of the crane's outriggers (front, rear, left and right) to measure maximum work capacity in each area. When slewing the boom from the longer outrigger area to the shorter outrigger area, the AML-C detects the motion and displays the maximum capacity according to the extension width of each of the outriggers, and brings the motion to a slow stop before it reaches the maximum capacity. Regardless of operator awareness, the AML-C's slow stop function will help to minimize any safety risk.
Control of asymmetric extension width of outriggers
O/R MAX
O/R MID
O/R MIN
O/R MID
A
F
E
C D
H
B
G
A: Over-front B: Over-rear C: Over-side D: Over-side
E: Rated Load [ O/R MAX ]
F: Rated Load [ O/R MID ]
G: Rated Load [ O/R MID ]
H: Rated Load [ O/R MIN ]SLOW STOP !
Outrigger Maximum extension
Outrigger Middle extension
Load radius 31.4 m → 34 m
Approx. 8 .3% expansion
Approx. 44 .3% expansion
Load lifting capacity 0.7 t → 1.01 t
Eco mode switch
0 m
6 t
3 t
1 t
10 m 10 m20 m 20 m30 m 30 m
20 m
30 m
10 m
0 m
10 m
20 m
30 m
9.00
6.75
4.50
2.25
0.000 10 20 30 40
Load
lift
ing
(t)
Load radius (m) Smart ChartConventional control
[Slewing range: 125 to 145 degrees]Performance comparison graph (GT-600EL)
*GT-750EL, GT-600EL
09 10
DIMENSIONS (mm)
WORKING RANGE
Continuing technical development requires Tadano to retain the right to make specifications, equipment and price changes without notice.
*Some specifications are subject to change
GT-750EL
Counterweight is hydraulically mounting/dismounting; in addition, dismounted counterweights can be lifted and moved for transport without a helper crane, as well as being re-mounted at a work site for operation.
Self-Removable counterweight
58.8%
COUNTERWEIGHT GT-750EL: Mass... 7.7 t
OPTIONAL ITEMS
• ABS • Spark arrester(Euro3) • 400 L fuel tank • Rear fog lamp • Spare tire and bracket • Stepladder(capacity 100 kg)
External lamp (AML) LED
Beacon lamp
Counterweight mounting/dismounting switch
Winch drum camera and monitor
Rear view camera (monitor: standard) Side marker lamp
Wind speed indicatorSearch light *GT-600EL, GT-750EL
Fixed counterweight: Mass... 4.0 t
Self-Removable counterweight: Mass... 1.0 t
Self-Removable counterweight: Mass... 2.7 t
Lift
ing
Hei
ght
(m)
Load Radius (m)Axis of rotation
0.6
1.4
0°
0 0
81°
40°
12.0 m
16.4 m
20.8 m
29.5 m
38.3 m
47.0 m
20°
30°
10°
50°
60°
70°
2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50
2 4 6 8101214161820222426283032343638404244464850525456
42.6 m
70.0
52.5
36.2
23.8
19.2
40.8
26.6
26.6
18.2
18.2
14.6
13.8
12.2
10.8
8.7
35.4
23.0
15.2
8.0
20.9
17.5
13.0
6.4
11.3
9.0
7.9
6.7
5.5
4.6
7.0
5.8
5.2
4.7
3.9
3.3
2.8
2.3
2.0
8.7
8.0
7.1
6.3
5.2
4.2
3.5
2.9
2.4
1.9
1.6
1.2
1.0
0.91.2
1.6
2.0
2.53.
13.94.
75.76.
97.78.
0
9.5
10.87.9
10.0 3.8
3.2
1.70.7
0.6
Lift
ing
Hei
ght
(m)
Load Radius (m)Axis of rotation
3.5
565452504846444240383634323028262422201816141210 8 6 4 2
5048464442403836343230282624222018161412108642
70°
60°
50°
10°
30°
20°
47.0 m
40°
81°
00
6664626058
47.0 m + 9.0 m
47.0 m + 14.3 m
0°
3.2
3.0
2.8
2.6
2.4
2.3
2.2
1.8
1.5
1.2
0.9
0.6
0.4
2.2
2.1
2.0
1.9
1.8
1.7
1.6
1.6
1.5
1.4
1.2
0.9
0.7
0.5
5°
25°45°
2,079
450
290
5,580
R3,960
2,80
0
MIN
.
MA
X.
MID
2.M
ID1.
7,00
0
6,50
04,
700
2,51
0
2,360 200
3,320
2,200
12.7°
6151,8892,900
1,422
892,680
3,99111,200
270
14,180
1,4982,400
17.5
°
2,365
3,74
0
MIN.:12,000–MAX.: 47,000
11 12
DIMENSIONS (mm)
WORKING RANGE
Continuing technical development requires Tadano to retain the right to make specifications, equipment and price changes without notice.
*Some specifications are subject to change
GT-600EL
DIMENSIONS (mm)
Continuing technical development requires Tadano to retain the right to make specifications, equipment and price changes without notice.
*Some specifications are subject to change
58.8%
0°
Axis of Rotation
8.0
7.5
0 0
81°
40°
11.0 m
15.0 m
19.0 m
27.0 m
35.0 m
43.0 m
20°
30°
10°
50°
60°
70°
2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
39.0 m
60.0
42.2
28.5
19.5
15.6
40.8
32.0
26.5
22.0
16.3
12.8
14.0
11.1
9.2
7.7
28.2
18.7
12.3
8.3
19.6
14.1
10.1
5.8
10.1
6.2
4.9
4.0
3.2
2.6
6.3
5.1
4.1
3.4
2.8
2.3
1.9
1.5
1.2
10.0
8.8
7.0
5.7
4.7
3.8
3.0
2.4
1.9
1.5
1.2
0.9
0.6
0.6
0.9
1.2
1.6
2.1
2.73.
44.25.
16.48.
19.0
10.0
Lift
ing
Hei
ght
(m)
Load Radius (m)
565452504846444240383634323028262422201816141210 8 6 4 2
5048464442403836343230282624222018161412108642 0
0
6058
62
39.0 m
43.0 m
35.0 m
27.0 m
19.0 m
15.0 m
11.0 m
81°
70°
60°
50°
40°
30°
20°
10°
0°
43.0 m + 9.0 m
43.0 m + 14.3 m
2.4
2.3
2.1
2.0
1.9
1.8
1.7
1.6
1.3
1.0
0.8
0.6
0.4
0.5
0.7
1.0
1.31.
72.22.
72.93.
13.43.
64.0
5°
25°45°
Lift
ing
Hei
ght
(m)
Load Radius (m)Axis of rotation
WORKING RANGE
GT-300EL
0.3
0.5
0.7
0.9
1.2
1.4
1.82.
22.42.
52.72.
83.0
0.3
0.4
0.60.
8
0.9
1.0
1.01.
11.21.
31.41.
41.51.
6
34.0 m + 14.0 m
34.0 m + 8.5 m
0 0
81°
40°
10.3 m
14.2 m
18.2 m
22.1 m
26.1 m
34.0 m
30°
50°
60°
70°
2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
30.0 m
Lift
ing
Hei
ght
(m)
Load Radius (m)Axis of rotation
45°25°5°
Load Radius (m)Axis of rotation
0°
0.6
4.6
9.5
7.2
7.2
5.8
4.6
3.7
2.9
2.3
1.9
1.5
1.2
0.9
0.7
1.0
1.2
1.5
1.9
2.3
2.9
3.7
4.76.
07.79.4
1.5
1.8
2.3
2.9
3.7
4.7
2.3
2.8
3.6
4.7
6.2
3.5
6.1
8.5
11.2
5.9
8.3
11.1
15.4
6.28.
010.912
.4
8.311
.313.0
15.518
.018
.0
10.9
15.1
23.430
.0
30.0 m
70°
60°
50°
10°
30°
20°
34.0 m
26.1 m
22.1 m
18.2 m
14.2 m
10.3 m
40°
81°
56
54
52
50
48
46
44
42
40
38
36
34
32
30
28
26
24
22
20
18
16
14
12
10
8
6
4
2
5048464442403836343230282624222018161412108642 0
0
Lift
ing
Hei
ght
(m)
MIN
.M
ID1.
MID
2.
MA
X.
R 3,295
2,55
0
2,18
04,
100
5,80
0
6,20
0
5,400
400
300
(2,072@Tire: 315/80R22.5)2,092
1,859
(3,8
10@
Tire
: 315
/80R
22.5
)
(307
)
(16.
9°) (11.7°)
(207
)
3,80
0
1,4224,3891,565 2,400 2,38910,600
455
12,620
11.4º
295
1,350
MIN.: 10,300–MAX.: 34,000
3002,3003,1002,900
16.4
º
195
2,079
2,308
450290
6,50
0
5,580
7,00
0
4,70
02,
510
R3,640
2,80
0
MID
2.M
IN.
MID
1.
MA
X.
205
3,320
18° 13.5°
2,680 2,900
MIN.: 11,000 ~ MAX.: 43,000
1,800
89285
11,2002101,889
13,140
1,730 2,400 1,498 3,991
3,78
0
1,422