Chennai 600 119 Department of Mechanical Engineering ...
-
Upload
khangminh22 -
Category
Documents
-
view
0 -
download
0
Transcript of Chennai 600 119 Department of Mechanical Engineering ...
St.Joseph’s College of Engineering – Chennai 600 119
Department of Mechanical Engineering
Faculty Information Sheet
Staff Name : Mr. N.SATHISHKUMAR., M.E., (Ph.D.)
Faculty Id : TME70
Designation : Assistant Professor
E- Mail Id : [email protected]
Qualification
:
UG B.E. Mechanical Engineering
PG M.E. Computer Integrated Manufacturing
(Ph.D.) Additive Manufacturing (Pursuing)
College Name :
UG University College of Engineering – Dindigul
PG College of Engineering - Guindy
(Ph.D.) College of Engineering - Guindy
Academic
Record with
Class Obtained :
UG First Class With Distinction (University Rank – 20)
PG First Class With Distinction
Total Teaching
Experience
(Years)
: 04 Years 05 Months
Areas of
specialization
(Research)
: Additive Manufacturing, Rapid Tooling, Composite Materials, Unconventional
Machining Process.
Subjects handled
in UG with
Subject Code
:
GE6152 – Engineering Graphics, GE6251 – Basic Civil and Mechanical
Engineering, GE6351 – Environmental Science and Engineering, ME6501 –
Computer Aided Design, ME6602 – Automobile Engineering, ME6603 – Finite
Element Analysis, ME6703 – Computer Integrated Manufacturing Systems,
GE8152 – Engineering Graphics, ME8691 – Computer Aided Design and
Manufacturing, OAT551 – Automotive Systems
Subjects handled
in PG with
Subject Code
: MF5102 – Computer Integrated Manufacturing Systems, MF5203 – Tooling For
Manufacturing
St.Joseph’s College of Engineering – Chennai 600 119
Department of Mechanical Engineering
Faculty Information Sheet
Labs handled in
UG with Subject
Code :
GE6162 – Engineering Practices Laboratory, GE6261 – Computer Aided Drafting
and Modeling Laboratory, ME6511 – Dynamics Laboratory, ME6513 – Metrology
and Measurements Laboratory, ME6712 – Mechatronics Laboratory, ME6611 –
CAD/CAM Laboratory
Department
Responsibilities
Held :
Class Counsellor, Time Table Team Member, Department Scholarship File
Incharge, Website Updation Team Member, Department Placement Team Member,
Dynamics Lab Assistant Incharge, Department Entrepreneurship Development
Team Member.
Publication in
International
Journals
:
1. Prithvirajan, R., Sugavaneswaran, M., Sathishkumar, N., & Arumaikkannu, G.
(2019). Metal bellow hydroforming using additive manufactured die: a case
study. Rapid Prototyping Journal. https://doi.org/10.1108/RPJ-07-2018-0182 (Web
of Science - Science Citation Index Expanded – Anna University Annexure I -
Impact Factor – 3.937)
2. NE Arun Kumar, A. Suresh Babu, and N. Sathishkumar. "Influence of near-dry
ambiance on WEDM of Monel super alloy." Materials and Manufacturing Processes
(2020): 1-9. https://doi.org/10.1080/10426914.2020.1866191 (Web of Science -
Science Citation Index Expanded – Anna University Annexure I - Impact Factor –
3.046)
3. Manoj Kumar, P., Elakkiyadasan, R., Sathishkumar, N., Ashwin Prabhu, G., &
Balasubramanian, T. (2020). Performance enhancement of a domestic refrigerator
with Nanoparticle Enhanced PCM over the condenser side. FME
Transactions, 48(3), 620-627. doi: 10.5937/fme2003620M (Web of Science -
Emerging Source Science Citation Index – Impact Factor – 1.37)
4. N.Sathishkumar, Naren Vivekanandan, Balamurugan, L, N Arunkumar, Ijaz
Ahamed. “Mechanical Properties of Triply Periodic Minimal Surface based lattices
St.Joseph’s College of Engineering – Chennai 600 119
Department of Mechanical Engineering
Faculty Information Sheet
made by Polyjet Printing.” Materials Today: Proceedings, 2020. 2934-2940.DOI:
doi.org/10.1016/j.matpr.2020.03.427 ( Web of Science – Conference Proceedings
Citation Index – Impact Factor – 0.576)
5. N. Sathishkumar, K Pravinkumar, G Ashwin Prabhu, M Siva, PL Sudharsan.
Investigation of mechanical properties in Al359 hybrid metal matrix composite
reinforced with SiC and fly ash. Materials Today: Proceedings.2020.
https://doi.org/10.1016/j.matpr.2020.04.024 (Scopus Indexed - Impact Factor –
0.576)
6. M Arun, N. Sathishkumar, K Nithesh Kumar, SS Ajai, S Aswin. Development
of patient specific bio-polymer incisor teeth by 3D printing process: A case study.
Materials Today: Proceedings. 2020. (Scopus Indexed - Impact Factor – 0.576)
https://doi.org/10.1016/j.matpr.2020.04.367
7. Arun Kumar, N. E., N.Sathishkumar, Raviraj, E., Narayanan, M. P., & Eugene,
R. (2020). Influence of near dry wirecut electrical discharge machining parameters
on kerf width in Monel 400. Materials Today: Proceedings. (Scopus Indexed -
Impact Factor – 0.576) https://doi.org/10.1016/j.matpr.2020.05.471
8. Ashwin Prabhu, G., N.Sathishkumar, Pravinkumar, K., Kumar, P. M.,
Balasubramanian, T., & Sudharsan, P. L. (2020). Heat treatment and analysis of
nickel super alloy for gas turbine applications. Materials Today: Proceedings.
https://doi.org/10.1016/j.matpr.2020.05.098 (Scopus Indexed - Impact Factor –
0.576)
9. Kumar, K. M., Arun, K., N.Sathishkumar, Narayanan, M. P., & Raviraj, E.
(2020). Experimental investigation on the machinability of nodular ductile iron with
cubic boron nitride and tungsten carbide inserts. Materials Today: Proceedings.
St.Joseph’s College of Engineering – Chennai 600 119
Department of Mechanical Engineering
Faculty Information Sheet
https://doi.org/10.1016/j.matpr.2020.04.862 (Scopus Indexed - Impact Factor –
0.576)
10. V Ashok kumar, N. Sathishkumar. Effect of fin geometry for various tubes
shape using CFD simulation on multi-channel heat exchanger in mobile air
conditioning (MAC). International Journal of Mechanical and Production
Engineering Research and Development (IJMPERD). 2018; Vol.8 (special issue 8);
26-32. ISSN (P): 2249-6890; ISSN (E): 2249-8001. (Scopus Indexed - Impact
Factor – 0.413)
11. Subramanian, M., Sathishkumar, N., Sasthrigal, J. S., Arunkumar, N., &
Hariharan, V. (2020). Optimization of process parameters in friction stir welded
dissimilar magnesium alloys using RSM. Materials Today: Proceedings.
https://doi.org/10.1016/j.matpr.2020.09.049 (Scopus Indexed - Impact Factor – 0.576)
12. Selvam, R., Sathishkumar, N., Kumar, K. M., Arunkumar, N., & Rahman, T.
K. (2020, September). Optimization of drilling parameters on hybrid natural fiber
reinforced polymer matrix composites. In IOP Conference Series: Materials Science
and Engineering (Vol. 923, No. 1, p. 012059). IOP Publishing.
doi:10.1088/1757-899X/923/1/012059 (Scopus Indexed - Impact Factor – 0.543)
13. Sathishkumar, N., Vincent, B., Arunkumar, N., Kumar, K. M., & Sudharsan,
P. L. (2020, September). Study of compressive behaviour on 3D printed ABS
polymer lattice structures infilled with epoxy and polyester resins. In IOP
Conference Series: Materials Science and Engineering (Vol. 923, No. 1, p. 012044).
IOP Publishing.
doi:10.1088/1757-899X/923/1/012044 (Scopus Indexed - Impact Factor – 0.543)
St.Joseph’s College of Engineering – Chennai 600 119
Department of Mechanical Engineering
Faculty Information Sheet
14. Balamurugan, L., Sathishkumar, N., Arunkumar, N., & Aravind, G. (2017).
Investigation of mechanical behaviour and surface roughness properties on
electroplated FDM ABS parts. Int. J. Eng. Res. Mech. Civ. Eng., 2, 60-67.
15. Sathishkumar N, Ashok Kumar V, Gokulnath M et.al. Performance analysis of
palmitic acid coated pcm storage container. International Journal of Research and
Review. 2020; 7(3): 495-500. DOI: inrein.com/10.4444/ijrr.1002/1857
16. Sathishkumar N, Premkumar P, Bruce AR et.al. Design and analysis of an
impeller of a turbocharger. International Journal of Research and Review. 2020;
7(4): 45-51. DOI: inrein.com/10.4444/ijrr.1002/1871
17. Vincent B, Sathishkumar N, Anand G. Synthesis and investigation of peek
based hybrid composite reinforced with zinc oxide and aluminium oxide
nanoparticles. International Journal of Research and Review. 2020; 7(4): 189-193.
DOI: inrein.com/10.4444/ijrr.1002/1889
18. B Vincent, N Sathishkumar, G Anand. Investigation on Thermo-Mechanical
Behaviour of E Glass Fibre and Iron Oxide Filler Particles Reinforced Epoxy
Composite. International Journal for Research in Applied Science and Engineering
Technology.2020; 8(4): 1522-1526. http://doi.org/10.22214/ijraset.2020.4245
19. Sathishkumar, N., Udayakumar, A. S. M., Vincent, B., & Kumar, V. A. Study
and Analysis of 3D Printed FDM Components by Non-Destructive Testing
Techniques. DOI: inrein.com/10.4444/ijrr.1002/1974
Publication in
Proceedings of
International
Conferences
(Chapters in
Book Series)
:
1. Sathishkumar, N., et al. "Investigation of Mechanical Behaviour and Surface
Roughness Properties on Copper Electroplated FDM High Impact Polystyrene
Parts." Advances in Additive Manufacturing and Joining. Springer, Singapore,
2020. 287-300. https://doi.org/10.1007/978-981-32-9433-2_25
St.Joseph’s College of Engineering – Chennai 600 119
Department of Mechanical Engineering
Faculty Information Sheet
2. Sugavaneswaran, M., N. Rajesh, and N. Sathishkumar. "Design of Robot
Gripper with Topology Optimization and Its Fabrication Using Additive
Manufacturing." Advances in Additive Manufacturing and Joining. Springer,
Singapore, 2020. 75-85. https://doi.org/10.1007/978-981-32-9433-2_6
3. N.Arunkumar, N.Sathishkumar et.al. Experimental Study and Analysis of
Defragmented Carbon Nanotubes in Polyacrylonitrile Matrix, Trends in
Manufacturing and Engineering Management, Springer Nature Singapore Pte
Ltd.,2020,https://doi.org/10.1007/978-981-15-4745-4_29
4. Sathishkumar, N., M. Sugavaneswaran, and G. Arumaikkannu. "Investigation
of sparse mode build style on material consumption, build time and compressive
behaviour of additive manufactured cellular structures." 6th International & 27th
All India Manufacturing Technology, Design and Research Conference (AIMTDR-
2016). 2016. ISBN: 978-93-86256-27-0
5. R. Prithvirajan, M. Sugavaneswaran, N. Sathishkumar, G. Arumaikkannu.
Study on feasibility of FDM made ABS die for metal bellow hydroforming.
International Conference on Manufacturing Technology and Simulation. 2017; 105-
108. ISBN 978-93-80689-26-5
6. Sathishkumar N, Hariharasudavelan R, Sugavaneswaran M, Arumaikkannu G,
"Study on Curling Due to Part Distortion in Additive Manufactured Thin Feature",
Abstract in Conference Proceedings "PROGRESS IN ADDITIVE
MANUFACTURING", NANYANG TECHNICAL UNIVERSITY SINGAPORE,
16-19 May 2016.
St.Joseph’s College of Engineering – Chennai 600 119
Department of Mechanical Engineering
Faculty Information Sheet
Conference’s
Attended
:
1. 6th International & 27th All India Manufacturing Technology, Design and
Research Conference (AIMTDR-2016), December 16-18, 2016 at College of
Engineering., Pune, Maharashtra, INDIA.
2. International conference on manufacturing technology and simulation, 7th and
8th July 2017, Indian Institute of Technology Madras, Chennai – 600036.
3. 7th International & 28th All India Manufacturing Technology, Design and
Research Conference (AIMTDR-2018), December 13-15, 2018 at College of
Engineering - Guindy, Tamilnadu, India.
4. International Conference on Materials, Manufacturing and Modelling (ICMMM
2019), March 29-31, 2019 at VIT - Vellore, Tamilnadu, India.
5. International Conference on Mechanical Engineering Design, 25-26 April 2019,
SSN College of Engineering, Chennai , India
6. International Mechanical Engineering Congress (IMEC-2019), 29th November-
1st December 2019, NIT Tiruchirappalli, India.
7. 2nd International Conference on Recent Trends in Metallurgy, Materials Science
and Manufacturing (IMME19), 27th December- 28th December 2019, NIT
Tiruchirappalli, India.
8. Participated in the National Level Conference on "RECENT TRENDS IN
MANUFACTURING TECHNOLOGY" organized by "COLLEGE OF
ENGINEERING - GUINDY"
9. ICTAMDMES 2020, St. Joseph's College of Engineering, International
Conference, Chennai, Tamil Nadu, 20th - 21st February 2020
St.Joseph’s College of Engineering – Chennai 600 119
Department of Mechanical Engineering
Faculty Information Sheet
FDP’s/ NPTEL
Courses/
Workshops/
Industrial
Trainings
FDP’s Attended:
1. Successfully completed the program, "Induction Training of Faculty"
supported by PMMMNMTT Scheme, MHRD, Govt. of India at Teaching Learning
Centre, IIT Madras from 6th November to 30th November 2017.
2.Fundamentals of Vibration & Analysis (St. Joseph College of Engineering. ) from
30/10/17 to (10 Days)
3. NPTEL FDP – 1 Week FDP – Manufacturing of Composites – August to October
2019.
4. NPTEL FDP – 1 Week FDP – Basics of Finite Element Analysis I – February to
April 2019.
5. NPTEL FDP – 11
2 Week FDP – Engineering Metrology – July/ October 2019.
GIAN Courses:
1. Participated in MHRD sponsored one week GIAN course on "3D PRINTING &
ADDITIVE MANUFACTURING" (COURSE CODE 151036L03) organized by
the "Department of Mechanical Engineering, National Institute of Technology
Warangal" during 20th - 24th June 2016. Expert faculty: Prof. Ian Gibson, Deakin
University, Australia.
2. Participated in MHRD sponsored one week GIAN course on "Mechanics of
mechanical metamaterials" Organized by the “Department of Mechanical
Engineering, Indian Institute of Technology Madras, Chennai" during 18 – 22
November 2019. Expert faculty: Prof. Dr. Changqing Chen, professor and director
of the Institute of Solid Mechanics, School of Aerospace Engineering at Tsinghua
University, Beijing, P. R. China.
St.Joseph’s College of Engineering – Chennai 600 119
Department of Mechanical Engineering
Faculty Information Sheet
NPTEL Courses Completed:
1.Basics of Finite Element Analysis I – 8 Weeks Course – IIT Kanpur – Elite
2.Manufacturing of Composites – 8 Weeks Course- IIT Kanpur - Elite + Silver
3. Engineering Metrology – 12 Weeks Course – IIT Kanpur - Elite
Workshop’s Attended:
1. One day National Level Workshop on "RECENT RESEARCH TRENDS IN
MANUFACTURING ENGINEERING" organized by "COLLEGE OF ENGINEERING -
GUINDY".
2. One day National Level Workshop on "APPLICATION OF ROBOTS IN
MANUFACTURING INDUSTRY" organized by "COLLEGE OF ENGINEERING -
GUINDY".
3. One day National Level Workshop on "FASCINATING APPLICATIONS OF
THERMAL ENGINEERING" organized by "RVS CET- DINDIGUL"
4. One day National Level Workshop on "RECENT TRENDS IN ROBOTICS AND
RENEWABLE ENERGY SOURCES (SOLAR)" organized by "ICE-TRICHY"
5.Two days All India Workshop on “Manufacturing Application of Micromachining for
Automobile Components” organized by “The Institution of Engineers (India)” along with
“St.Joseph’s Institute of Technology” on 16th and 17th July 2019.
Industrial Trainings
1. Successfully completed an industrial training in "Reconditioning of Engine and
Parts of Transmission system" at "TNSTC (MADURAI) LTD Reconditioning unit
Dindigul".
2. Successfully completed an industrial training in "Basics of Foundry, Green sand
preparation, Automatic handling of furnace using sensors, Scrap management and
Quality control in foundry" at "INTERFIT INDIA PVT LTD (FOUNDRY
DIVISION) Dindigul".
St.Joseph’s College of Engineering – Chennai 600 119
Department of Mechanical Engineering
Faculty Information Sheet
Online Webinars : Webinars Organized 07
Webinars Attended 51
Industrial
Projects
:
Successfully completed an industrial project on developing "3D printed sparse build
hydroforming die for making thin metallic bellows" to the company Metallic
Bellows (India) Pvt. Ltd 3/136, East coast road, Vettuvankeni, Injambakkam,
Chennai 600 115.
No of UG
Projects Guided : 13
Google Scholar
Profile Link : https://scholar.google.com/citations?user=b2P002cAAAAJ&hl=en
ORCID Id : https://orcid.org/0000-0002-2358-5297
Scopus Author
Id :
57209207216
https://www.scopus.com/authid/detail.uri?authorId=57209207216
Research Gate
Profile Link : https://www.researchgate.net/profile/Sathishkumar_Natesan2
Web of Science
Researcher Id :
AAS-3306-2020
https://publons.com/researcher/3481411/n-sathishkumar/metrics/
Mendeley Profile
Link : https://www.mendeley.com/profiles/sathishkumar-n2/
Anna University
Staff Id : 3123420
Awards or
Achievements : All India Topper in NPTEL Course on “Manufacturing of Composites” Conducted
by IIT Kanpur in 2019.