Altro Reliance™ 25 product datasheet - Building Materials
-
Upload
khangminh22 -
Category
Documents
-
view
0 -
download
0
Transcript of Altro Reliance™ 25 product datasheet - Building Materials
800 377 5597 USA / 800 565 4658 CAN support@altrofl oors.com
www.altro.com
For technical support please call and speak with our Technical Services department.
Designed for possibilities.Made for people.
Altro Reliance™ 25 product datasheetRobust, slip-resistant flooring for heavy-duty areas
discover altro.com/reliance
Looking for a robust, heavy-duty solution for your back-of-house or front-of-house areas? With both traditional and modern looks in one slip-resistant range, it couldn’t be easier now.
Confidence, trust and assurance – Altro Reliance 25 is a premium choice in heavy duty commercial flooring. At 2.5mm thick, it is highly durable and can cope with high levels of foot and wheeled traffic without compromising on performance.
Combine Altro Reliance 25 with Altro wall protection for your toughest areas.
Altro Reliance 25 also looks great paired with Altro Symphonia, Altro Wood, Altro Orchestra, Altro Lavencia or Altro Walkway 20.
Typical applications
Healthcare, laboratories, kitchens, bars, cafeterias, verterinaries, industrial areas, manufacturing, machine shops, chemical processing, arenas and more
Features + benefits
• Highly durable and robust at 2.5mm thick
• Both traditional and modern looks available
• Able to endure high levels of foot and wheeled traffic
• Achieves R10 slip resistance rating and SCoF of .8 dry, .9 wet
• FloorScore Certified / Low VOCs
Slip resistance
It is designers, specifiers and end-users’ responsibility to ensure flooring is fit for purpose, and it’s part of our role here at Altro to help make this process easy. Our flooring is separated into three categories: safety, slip-resistant and smooth.
Altro Reliance 25 is a slip-resistant flooring. It’s a perfect choice for many commercial areas in which your slip risk is not as high as a commercial kitchen or other wet environments, but your patrons, patients, students and employees still deserve to be secure on their feet. Slip-resistant flooring from Altro will reduce the risk of slips, give you peace of mind and look good doing so.
Altro Easyclean
Rather than using a superficial surface coat, Altro Easyclean Technology is incorporated into the flooring while it is manufactured. This allows Altro flooring to benefit from enhanced cleaning and maintenance while still allowing our products’ slip-resistant properties to shine through.
Smooth flooring will have a higher level of Altro Easyclean than a slip-resistant or safety floor.
• Industry-leading ease of cleaning
• Enhanced long-term cleanability
• Cleaning and maintenance cost savings
• Sustained long-term slip resistance
• Exceptional long-term durability
• Low dirt pick-up qualities
• Improved color retention
.8D.9W DCOF
.56
Altro Reliance 25Pendulum test
PTV≥40
6’7”width
65’5”length
2.5mmthick
sheetformat
JetWR100 / A1M100 LRV 6
D2501
Roof GardenWR262 / A1M154 LRV 23
D2500
SkylineWR52 / A1M52 LRV 25
D25332
MonumentWR305 / A1M239 LRV 23
D2508
MidnightWR72 / A1M72 LRV 11
D25421
VaultWR277 / A1M100 LRV 5
D2517
BoneWR20 / A1M20 LRV 37
D25215
RockWR84 / A1M84 LRV 23
D2504
StormWR82 / A1M82 LRV 16
D25903
Ice RinkWR291 / A1M01 LRV 70
D2514
BiscuitWR146 / A1M20 LRV 30
D25904
ArenaWR297 / A1M20 LRV 41
D2510
FogWR81 / A1M81 LRV 27
D25153
StatueWR304 / A1M12 LRV 62
D2513
RustWR150 / A1M238 LRV 10
D25907
ForgeWR248 / A1M238 LRV 9
D2515
SignalWR300 / A1M42 LRV 13
D2516
StreamWR288 / A1M71 LRV 22
D2518
TempleWR261 / A1M81 LRV 27
D2509
PlazaWR27 / A1M27 LRV 32
D2512
PoolWR307 / A1M73 LRV 10
D2503
RunwayWR72 / A1M72 LRV 9
D2506
PavementWR83 / A1M83 LRV 14
D2507
FountainWR306 / A1M71 LRV 22
D2502
GalleryWR62 / A1M62 LRV 10
D2511
StreetlightWR287 / A1M79 LRV 45
D2505
Specifi cations
Type + class ASTM F1303 Type I, Grade 1, Class A, safety fl ooring
Thickness and wear layer 2.5mm | .10”, homogenous construction
Roll dimensions 6’7” x 65’5 | 2m x 20m
Weight 6.27 lbs./yd2
| 3.4 kg/m2
Warranty 15 years
Cleaning technology Altro Easyclean
Static coeffi cient of friction ASTM D2047 .8 dry, .9 wet
Dynamic coeffi cient
of frictionANSI/NFSI B101.3 .44 wet DCOF
Ramp test DIN 51130 R10
TRRL pendulum testBS 7976
ASTM E30340+
Static load limit ASTM F970 2000 psi
Indentation EN 433 ≤ 0.10mm
Wear (abrasion) resistance EN 660 ≤ 10% 50,000 cycles
Castor chair abrasion EN 425 Pass
Flexibility ASTM F137 Pass
Light fastness EN 20105-B02 ≥ 6
Sound insulation ISO 140-8 7dB
Electrical behaviors EN 1815 ≤ 2kV Antistatic
Minimum operating
temperature-4°F (-20°C)
Fire and smoke
performance
CAN/ULC - S102.2
ASTM E648
ASTM E662
Tested
Class I
< 450
Chemical resistance ASTM F925 Tested
VOC emissionsCA 01350
FloorScore
Pass
Certifi ed
Bio-based content Manufactured with rapidly renewable bio-based content.
Ortho-phthalate content Ortho-phthalate-free
Recycled content This product contains 10% post-consumer recycled content.
Composition
Traditional - Silicon carbide, aluminum trioxide and colored quartz aggregate throughout
thickness of PVC. Modern - Aluminum trioxide and colored quartz aggregate throughout
thickness of PVC. Altro Easyclean incorporated for exceptional cleanability.
Backing Non-woven polyester/cellulose glass fi ber reinforcement scrim.
Installation and
maintenance
Altro fl ooring must be installed by a professional fl ooring installer that has attended an Altro
training clinic. Installation procedures available at altrofl oors.com/downloads, training clinic
information at altrofl oors.com/training. Proper care of Altro fl ooring is critical. Please consult our
cleaning procedures available at altrofl oors.com/downloads. Failure to install, heat weld, and/or
maintain correctly could void the warranty.
StainingCertain chemicals may cause staining of vinyl fl ooring. Traffi c stains may be caused by asphalt
and rubber products, like rubber mats. Please conduct stain test before installation.
Altro, Altro Reliance 25 and Altro Easyclean are all trademarks of Altro Limited. Content was correct at time of creation.
Altro reserves the right to change any detail. Please consult your sales representative for the latest product information.
© Copyright Altro USA 2020
>.8D.9W
R10Pendulum test
PTV≥40
DCOF.56
15year
product warranty
LEED facts LEED v4
Altro Reliance 25 6
This product may help contributeto the following credits
Materials and resources
Contains recycled content 1
Materials and resources
Renewable bio-based content 1
Materials and resources - EPD
Environmental product declaration
Type III product specifi c
1
Materials and resources - HPD
Health product declaration 1
Environmental quality
Low emitting materials, fl ooring 1
Environmental quality
Low emitting materials, adhesives 1
Discover more of our sustainability story
and credentials at altro.com/sustainability
Looking for samples?Order samples 24 hours a day, 7 days a week at www.altro.com/samples
© Copyright Altro 2020
USA 800 377 5597
CANADA 800 565 4658
www.altro.com
Content was correct at time of print. Altro reserves the right to change any detail. Please consult www.altro.com or your local Sales Representative for the latest product information.
Follow us
Discover more online!
Maintenance guides Illustrated cleaning guides Warranty forms
800 377 5597 USA / 800 565 4658 CAN support@altrofl oors.com
www.altro.com
For technical support please call and speak with our Technical Services department.
Installation quickfacts for safety and slip-resistant flooring
Substrate preparation
• Patching materials used on the substrate must be Portland-cement based
patching compound. Gypsum-based products may be unsuitable. Silicate
based admixes and sprays are not suitable.
• Moisture-tolerant patching and leveling compounds must be used in wet
environments.
• Concrete surface pH should not exceed 9.9 alkalinity.
• Conduct moisture tests per ASTM F2170 on all concrete slabs regardless
of age or grade level. Relative humidity tests must not exceed 90% RH.
Test results are only indicators of current moisture conditions at the time of
testing and do not predict future moisture conditions.
• All concrete on or below grade must have a fully functioning and intact sub-
slab moisture vapor barrier.
• Substrate should be smooth, clean and dry.
• Do not use markers, pens, construction crayons, tapes or paints on the
subfloor. This may bleed through and cause permanent staining.
• Follow all applicable local, state and federal regulations and laws pertaining
to saw cutting, grinding and patching work of concrete; all work is to
comply with OSHA 3902 Respirable Crystalline Silica Standard.
Acclimatizing material
• HVAC must be in permanent operation prior to installation.
• Installation area and Altro materials must be maintained and installed
between 68°F (20°C)-85°F (29°C).
• Rolls should be kept standing upright in a secure location to prevent
toppling over for a minimum of 72 hours at 68°F (20°C).
• A minimum temperature of 68°F (20°C) must be maintained for 72 hours
before, during, and after installation.
• Do not proceed with installation until all conditions have been met.
Fitting / laying
• Material should be checked for defects, unmatched dye lots, etc. If a fault
Installation quickfacts do not replace Altro’s complete installation and maintenance library. For indepth information, Installation and Maintenance guides are available online at altro.com/techdocs
Grooving depth based on flooring
Altro Stronghold 30 - 3.0mm 75%
Altro Atlas 40 - 4.0mm 75%
Altro Classic 25 - 2.5mm 75%
Altro Aquarius - 2.0mm 90%
Altro Reliance 25 - 2.5mm 90%
Altro Walkway 20 - 2.0mm 90%
Altro Tungsten - 2.0mm 90%
Adhesive based on flooring
Altro Stronghold 30 - 3.0mm AltroFix 30
Altro Atlas 40 - 4.0mm AltroFix 30
Altro Classic 25 - 2.5mm AltroFix 30
Altro Aquarius - 2.0mm AltroFix 30
Altro Reliance 25 - 2.5mm Ecofix 20E
Altro Walkway 20 - 2.0mm Ecofix 20E
Altro Tungsten - 2.0mm Ecofix 20E
All wet areas, regardless of flooring selection, should use
AltroFix 30. Contact Technical Services for additional
specific information on adhesive selection.
A seperate quickfacts document is available for
adhesive-free Altro XpressLay and Altro Cantata.
upd
ated
12/
03/2
0
LEED forms Installation guides Installation quickfacts
Even more great resources!
Literature
• BIM components
• SpecWizard by Arcat
• SDS sheets
• Detail drawings and CAD files
• High resolution swatch downloads
• Photo galleries - www.altropics.com
• Solutions by area type - ORs, labs and
cleanrooms, kitchens, senior living and more!