2022 ECOaaS v2.5 Update v1.0 (EN) - TycheTools

Update 2022

DATA-DRIVEN MISSION CRITICAL

v2.5

Version 2.5

On February 1, the changes introduced in the ECOaaS v 2.5 solu-tion have been activated in the production site, accessible by the customers.

The modi�cations described below are part of the continuous improvement processes of TycheTools both in interface elements as in the back-end and system architecture.

Any suggestion or comment can be sent through the contact at www.tychetools.com

©TycheTools. All right reserved Page 3

©TycheTools. All right reserved

The following graphics have been added and/or modi-fied:

• Center cards now show the trend of calculated values

• Navigation through the map in its different levels (upper left area) updates automatically and simulta-neously the values of the psychrometric map.

• A card has been added with the calculation of emis-sions equivalent tons of CO2 and its trend.

• Target PUE has been added to the PUE card if is inside a datacenter

• In the lower left area a view has been added of the overall power consumption of the company, and the performance indicator charts for each of the data cen-ters.

• In the lower right area, a radar style graph has been added, showing the most critical cabinets in two selec-table categories: Temperature (compliance with the ASHRAE standards) and Underused IT Equipment

100%

90%

60%

Dry bulb temperature ºC

Dew

poi

nt te

mpe

ratu

re ºC

40

38

36

34

30

28

26

24

22

20

18

16

14

12

10

8

6

4

2

0

ºC0 5 10 15 20 25 30 35 40

40%

20%

30%

10%

Wet bulb te

mperature

ºC

Relative humidity

Overview / All Companies

View Rating

Datacenter energy consumption

Feed

back

Thermal Resilience

100%

ThermalConformance

95.98%

PowerConsumption

337.45

PUE

3.14Companies status

Average temperature Average humidity19ºC 70%

% Servers usage

98%

Monitored racks

21Power median

5.68kW

KPIs Heatmaps ReportOverview 3 English

11/12/2020 Select Date

Metrics overview

PUE Efficiency

Air Flow issues

CO2 emissions

739.02 tCO2 - eq/year

Q1 Q2 Q3 Q4

Estimated savings in the last year

Estimated savingsin the coming monthxxxx 70%

Datacenter Last year

Datacenter 1 Datacenter 2 Datacenter 3 Datacenter 4 Datacenter 5

Datacenter 6 Datacenter 7 Datacenter 8 Datacenter 9

Changes in the interface Overview

KPIs

Pressure

Pressure Alerts

Mad01-Room2

Critical racks pressure values

All Alerts Warnings Temperature OK

Room 1 - Rack 23Select

Room 1Rack 234-34

Room 1Rack 234-34

Room 1Rack 244-34

Room 1Rack 233-22

Room 2Rack 256-58

Room 2Rack 266-85

Room 3Rack 287-25

Room 3Rack 287-25

Room 3Rack 287-25

5 1 1

7

51

2 5

Pressure evolution

Close

Company 1 DC Mad 01 / KPIs / Detail Pressure

Feed

back


11/12/2020 Select Date

Average pressure in cold aisles (StdDev) 94249.21 (±132.4) Pa

Average pressure in hot aisles (StdDev) 94137.17 (±115.82) Pa

30 Pressure Row View

Room 1- Row 3Select

Median

Negative pressure

Median

Positive pressure

Rack 1

Rack 10

Rack 23

Rack 32

Rack 98

Rack 233

Rack 2

Rack 20

Rack 34

Rack 34

Rack 34

0

Negative pressure Positive pressure

• In the KPIs global screen, the aggregated data of the floor measure-ments (physical floor under the technical floor) has been added to the Pressure, Temperature, and Humidity cards.

• The Pressure Detail screen has been completely redesigned to improve reading and analysis. A tree chart has been added with the most critical racks (upper left area). Likewise, the graphs of pressure per rack have been modified to allow a better visualization (upper right area). The time evolution graph (area central) now can be filtered by row.

Pressure Detail

Pressure status


• The data structure has been reorganised by adding the z-axis value (height). This data has been added to the dynamic information cards for each sensor.

• Map selection is now done via a drop-down menu on the left.

• All maps can now display maximum, median, and minimum values.

• Areas that are not under measurement are now painted in grey, so as not to add unrealistic information to the display.

• The loading of maps has been optimised to improve their speed.

• Filters have been added to the Node Evolution graph, so that sensor selection is now much clearer. Also, the multiple selection allows the comparison of different sensors with each other. The location of the sensors is also displayed in the dynamic data, allowing better spatial identification.

Row 2

Node temperature evolution

Row FilterBOA02526 Inlet - -Rack Type Unit Select node

20

Cold Aisle summary Aisle temperature evolution Node temperature evolutionHot & Cold aisle summary

Area 1

Area 2

Temperature : Minimum Instant heatmap redrawRack IT power in rack Details Area, Sensors

Heatmaps


•The Humidity Detail screen now shows the psychrometric map with a scroll bar that allows the data in the previous six days to be visualized, in addition to the selected day. This time shift can be done manually or automatically using the play button. A selectable time evolution graph of the node has also been added. The sensors dynamically display the most relevant data.

Humidity Detail


ReportNew section

We continue to make it easy to view data, read reports is usually something that ends up consuming more time than desired, some-thing that from TycheTools we want to simplify.

This new section will present these reports in a newspaper format, easy and comfortable to read: the most relevant news, updated continuously, from your data center or technical room in just a glance.

Our AI will offer you in real time a vision of the areas in which to focus the attention; the location, date and time in which it the problem has been detected; and corresponding graphs where you can assess the scope of the issue.

A very useful tool for those operators or managers who need to be able to quickly see the critical points of their technical space.

Module name | 12/02/2021 10:21pm

Title

Module name | 12/02/2021 10:21pm

KPIs Heatmaps ReportOverview

Report / Company 1 / Boadilla

English

11/12/2020 Select date

TitleCondiciones inseguras para equipos IT

Thermal Conformance |04/10/2021

TitleProblemas en el control de flujo de aire en la sala xx, fila xx.

Temperature | 04/10/2021

Los flujos de aire frío/caliente no están equilibrados, esto indica una posible recirculación de aire.

Acciones sugeridasAñadir paneles ciegos, cerrar bastidores, poner paneles fijos, cubrir huecos en los servidores. Acciones de mejora: Cerramiento de pasillos fríos.

Posible recirculación de aire en rack xx

Pressure 12/02/2021 10:21pm

Recommendations

Rangos ASHRAELa temperatura alcanza valores fuera del rango recomendado por ASHRAE

Acción sugerida

Compruebe la vista detallada de la humedad para ajustar los puntos de consigna de los sistemas de sistemas de refrigeración

Servidores zombie en sala xxxPodría haber algún servidor infrautilizado

Accion sugerida

Algunos equipos informáticos de la sala parecen infrautilizados. La consolidación de la carga de trabajo virtualizada o la gestión gestión dinámica de los modos de bajo consumo puede conducir a mejoras en la eficiencia

Module name | 12/02/2021 10:21pm

La presión bajo el suelo técnico parece ser menor que en la sala. Podría haber puntos de presión negativa.

Posible presión negativa en sala xx

Pressure | 12/02/2021 10:21pm

La humedad en la sala debería estar entre xx% y xx%, ya que valores más altos crean riesgo de condensación y más bajos riesgo eléctrico.

Hay riesgo de condensación ya que la humedad actual es del 90%.

Elevado consumo de energíaRiesgo de condensación en sala

Humidity | 12/02/2021 10:21pm Humidity | 12/02/2021 10:21pm

El 95,84% de la carga de IT en esta sala se está ejecutando fuera del rango recomendado de ASHRAE.

ASHRAE recomienda que los equipos de IT se mantengan en este rango de temperaturas: xxºC y xxºC.

La temperatura actual es de xxºC .

En condiciones normales ASHRAE recomienda que los equipos IT se mantengan en los rangos recomendados, que es entre xx y xx. Excepcionalmente se permite el rango permitido.

En este caso se sobrepasa el rango recomendado en

Actualmente la variación de valores de inlet es muy grande, para entrar en la zona de ASRHAE permitida, recomendamos aumentar la temperatura de impulsión en xxºC. Idealmente, los valores deberían estar concentrados en un único punto. Aumentar la temperatura de impulsión permitirá ahorrar hasta un 70% en el consumo de refrigeración.


Alert Center

Our alert screen continues to grow. We have focused on deve-loping the detail of the alerts, with graphs showing the loca-tion of the sensor that generated the alert, and the temporary evolution to be able to see the system-generated anomalies.

This is the maximum level of detail that the user can access through the alerts table.

• Markers have been added to the time evolution graphs of the sensor indicating the exact moment in which the alert is gene-rated.

• Related alerts have been improved. In the case of being alerts generated by a floor sensor, the alerts are displayed closest to the sensor that caused the alert. In the case of be alerts genera-ted by a sensor located in a rack, they will be displayed alerts related to the same rack.

• In addition, the ground sensors show, besides the time evolu-tion, a map with the location of the sensor within the technical room.


Incident management & Help center

For an operator it is important to be able to control global incidents, but also those assigned to him and its status. To facilitate this task we have included in the user profile a small table where the user can update the tasks in progress. This table will show issues assigned to himself, and the status (in progress, dismissed, active, already finished).

Regarding the Help Center, we continue updating content, improving dynamic Help linked to the Help Center, and increasing the contents.

To keep the user informed we have also added a new section of changes, visible when the platform has new features in its structure.

Help Center

Help Center

Feed

back

Search Dynamic help

Off On

Select your preferences if you want to activate dynamic view This option will allow you to have interactive help in al screens.

Any question about our platform? Please use our searchbar .

You can also use Feedback platform to send us your issues.

Results

Lorem ipsum dolor sit amet, consectetuer adipiscing elit, sed diam nonummy nibh euismod tincidunt ut laoreet dolore magna aliquam erat volutpat.

Ut wisi enim ad minim veniam, quis nostrud exerci tation ullamcorper suscipit lobortis nisl ut aliquip ex ea commodo consequat. Duis autem vel eum iriure dolor in hendrerit in vulputate velit esse molestie consequat, vel illum dolore eu feugiat nulla facilisis at vero eros .

Learn more

Certificate of Calibration

Row1

Hot & Cold aisle humidity summary 11/12/2020

Select row

Lorem ipsum dolor sit amet, consectetuer adipiscing elit, sed diam nonummy nibh euismod tincidunt ut laoreet dolore magna aliquam erat volutpat.

Ut wisi enim ad minim veniam, quis nostrud exerci tation ullamcorper suscipit lobortis nisl ut aliquip ex ea commodo consequat.

Understanding boxplots

Learn more

Did you know?...

Pressure chart shows you medianvalues. Keep your attention in yourcold aisles.

Humidity


Dynamic Help

Help center

On Off

Cards showing the trend of each variable.New interactive psychrometric chart with more critical racks per variable

New features

Overview

KPIsHumidity detail: New graphs Pressure detail: Now shows floor pressure evolution.

New tabs for floor sensorsNode evolution with improved filters

Heatmaps

Now you can see ASHRAE levels in all of the graphs

Dynamic help

Now you can easily see how your Data Centre is doing as if you were reading a newspaper.

¡New section!: Reports

Profile Close

Edit your profile

Role

Name

Company

Phone

Email

Surname

Operator

[email protected]

Allow Email Noti�cations

Change your password

Current password

New password

Repeat your password

*********TemperatureHeatmapsAlerts

Power Anomaly Pressure Humidity

SLAPUE

Thermal ResilienceCooling

IT Power

Please select most important Tags for you.Personal Interests

Save ChangesDiscard Save ChangesDiscard

Company 1 DC Mad 01 / Profile

Close session

Edit profile

[email protected] Pérez

Change password


Team work Madrid_DC03

Feed

back

Assigned issues

256822ghj

25568dasj

2a3ds9655

[email protected]

[email protected]

[email protected] 14 Sept 202110:25 pm

ID/Issue Status

Temperature value

Temperature spatial

Airflow issue

EndedDone by

In progress

In progress

Done

%Solved issues

In progress 33%

Active 22%

Done 44.5%


Backend: what you don't see Improvements are found not only are in the screens that the user will see; our code is continually optimized, and we continuously review the calculations we perform with the data.

In this new version, we have reviewed the formulas of static and dyna-mic consumption, as well as consumption per rack and calculation of the SHR. In addition, the calculations of power consumption and cooling have been reexamined, improving calculation speed and optimizing code.

The entire platform has been unified, showing the date/time in format 24h.


TycheTools SL.Sebastián Gómez 5

28023 Madrid - EspañaTel:+34 911 212 416

Email: [email protected]

2022 ECOaaS v2.5 Update v1.0 (EN) - TycheTools

Documents

Transcript of 2022 ECOaaS v2.5 Update v1.0 (EN) - TycheTools