Iocl Proce Bid

7/30/2019 Iocl Proce Bid

1/63

ITEM

CODESl.

No.

DESCRIPTION Unit Rate

(Rs.)

RATES IN WORDS

(RUPEES)

I SITE CLEARANCE

1 1 Clearing the site of all weeds, shrubs, bushes, grass and growth of any

other vegetation including uprooting trees and saplings of girth upto 30

cms, measured at a height of 1 m above ground level and other

obstructions etc. complete and disposing off the materials to an

unobjectionable location irrespective of any lead and lift including filling

the pits/hollows formed by removing the weeds, shrubs, etc. with

approved selected earth, rolling the surface with hand roller, etc. as

SQM 2 Two only

2 Felling of trees of girth measured at a height of 1 m above ground levelincluding cutting of trunks and branches, removing the roots and

disposal of all materials and filling and compacting of earth.2 a) Beyond 30 cm girth and upto 60 cm girth EACH 74 Seventy Four only

3 b) Beyond 60 cm girth and upto 120 cm girth EACH 320 Three Hundred andTwenty only

4 3 Removing the roots by excavation of an already cut tree in the site upto

a maximum girth 120cm and backfilling and compacting of the pit all

complete as directed by Engineer-in-charge.

EACH 178 One Hundred andSeventy Eight only

II EARTHWORK EXCAVATION

4 Excavation for foundations, substructures, etc. to the following depths

below existing ground level, in all types of ordinary and hard soils

including hard murum, de-watering the excavated pits necessary

shoring, strutting, including backfilling sides of foundation with selected

excavated material, stacking earth for back filling and/or disposing

excess excavated material outside the premises of IOCL at an

unobjectionable place irrespective of lead etc complete (Excavation

/removal of rubble fill shall also be covered under this item. The rate

shall include dewatering of the excavated area till completion of all works

5 a) Upto 1.5 m CUM 125 One Hundred and

Twenty Five only6 b) Above 1.5 upto 3.0 m CUM 142 One Hundred and Forty

Two only7 c) Above 3.0 upto 4.5 m CUM 159 One Hundred and Fifty

Nine only8 d) Above 4.5 upto 6.0 m CUM 176 One Hundred and

Seventy Six only5 Excavation for foundations, substructures, etc. to the following depths

below existing ground level, in soft rock and laterite rock, de-watering

the excavated pits, including disposing excess excavated material

outside the premises of IOCL at an unobjectionable place irrespectiveof lead etc complete (The rate shall include dewatering of the excavated

area till completion of all works upto ground level)

9 a) Upto 1.5 m CUM 253 Two Hundred and Fifty

Three only10 b) Above 1.5 upto 3.0 m CUM 283 Two Hundred and Eighty

Three only11 c) Above 3.0 upto 4.5 m CUM 313 Three Hundred and

Thirteen only6 Excavation for foundations, substructures, etc. to the following depths

below existing ground level, in hard rock by chiselling/pneumatic drilling,

de-watering the excavated pits, including disposing excess excavated

material outside the premises of IOCL at an unobjectionable place

irrespective of lead etc complete (The rate shall include dewatering of

the excavated area till completion of all works upto ground level)

12 a) Upto 1.5 m CUM 560 Five Hundred and Sixty

only

INDIAN OIL CORPORATION LIMITED.(MARKETING DIVISION)

ANDHRA PRADESH STATE OFFICE

PRICE SCHEDULE

DESCRIPTION OF WORKS : INSTALLATION OF 5/10/15/20/50/70KL TANK,

DISPENSING UNITS, PIPELINES, OTHER CIVIL / MECHANICAL / ELECTRICAL /MAINTENANCE WORKS.

PART - A - CIVIL WORKS

Tenderer's Signature with seal 1

PDF created with pdfFactory trial version www.pdffactory.com
http://www.pdffactory.com/http://www.pdffactory.com/


2/63

ITEM

CODESl.

No.


(Rs.)

RATES IN WORDS

(RUPEES)

13 b) Above 1.5 upto 3.0 m CUM 590 Five Hundred and Ninety

only14 c) Above 3.0 upto 4.5 m CUM 620 Six Hundred and Twenty

only7 Excavation for foundations, substructures, etc. to the following depths

below existing ground level, in hard rock by controlled blasting, de-watering the excavated pits, including disposing excess excavated

material outside the premises of IOCL at an unobjectionable place

irrespective of lead etc complete (The rate shall include dewatering of

the excavated area till completion of all works upto ground level)15 a) Upto 1.5 m CUM 358 Three Hundred and fifty

Eight only16 b) Above 1.5 upto 3.0 m CUM 388 Three Hundred and

Eighty Eight only17 c) Above 3.0 upto 4.5 m CUM 418 Four Hundred and

Eighteen only8 Supply, f illing, spreading and compacting after sprinkling required

quantity of water using 8 to 10 ton roller to 95% of maximum dry density

in layers not exceeding 200 mm compacted thickness as per the

enclosed detailed specifications.

18 a) Imported approved quality murram CUM 290 Two Hundred and Ninetyonly19 b) Excavated earth CUM 46 Forty Six only

20 c) Selected imported earth CUM 229 Two Hundred and

Twenty Nine only9 Filling in plinth or where directed including supply and transporting,

spreading thoroughly compacted in layers not exceeding 200 mm in

depth complete

21 a) with selected excavated earth CUM 40 Forty only

22 b) with selected imported earth CUM 223 Two Hundred and

Twenty Three only23 c) with clean coarse river sand CUM 671 Six Hundred and Seventy

One only24 d) with manufactured sand CUM 613 Six Hundred and

Thirteen only25 10 Mass mechanicalexcavation for Land development, excavated earth

comprising of all kinds of soft and loose soil, murram, kankar, gravel,

soft rock, shrubs, grass etc., excluding hard rock, including filling at site

if necessary / stacking serviceable materials / disposing the surplus

excavated materials within / outside IOCL premises to an

unobjectionable location irrespective of any lead & lift, as directed by

IOCL. The excavation shall be termed as mass excavation if and only if

the quantity of excavation is minimum 100.00 CUM. (Measurement will

be onl for the uantit of cuttin

CUM 123 One Hundred and

Twenty Three only

III CONCRETE AND ALLIED WORKS

11 Providing and laying of plain cement concrete (PCC) of specified grade

conforming to latest IS 456 for all works in foundation, plinth &

superstructure. Item includes cost of all materials, mixing, pouring in

position, compaction, formwork, curing, finishing etc complete as

s ecified in detailed descri tion.26 a) Plain Cement Concrete 1:4:8 using 40mm nominal size aggregates CUM 2,157 Two Thousand One

Hundred and Fifty Sevenonly

27 b) Plain Cement Concrete 1:3:6 using 40mm nominal size aggregates CUM 2,418 Two Thousand Four

Hundred and Eighteen

only28 c) Plain Cement Concrete 1:2:4 using 20mm nominal size aggregates CUM 3,132 Three Thousand One

Hundred and Thirty Two

onl12 Providing and laying of reinforced cement concrete (RCC) of specified

grade conforming to latest IS 456 Item includes cost of all materials

excluding steel reinforcement, mixing, pouring in position, compaction,

formwork, scaffolding, curing, finishing etc complete as specified in

detailed descri tion.i In foundations plinth, beams, columns, pedestals, walls, pilecaps etc -

upto plinth level

29 a) Concrete of nominal mix 1:1.5:3 CUM 3,876 Three Thousand Eight

Hundred and Seventy Six

only




3/63

ITEM

CODESl.

No.


(Rs.)

RATES IN WORDS

(RUPEES)

ii In lintels, shelves, balconies, beams, sunshades, wall, column, roof

slab, staircase, fins, facia etc- above plinth level.

30 a) Concrete of nominal mix 1:1.5:3 CUM 4,936 Four Thousand Nine

Hundred and Thirty Six

only13 Providing and laying of reinforced cement concrete (RCC) of specified

grade conforming to latest IS 456 using RMC. Item includes cost of all

materials excluding steel reinforcement, mixing, pumping / pouring in

position, compaction, formwork, scaffolding, curing, finishing etc

complete as specified in detailed description.

i In foundations plinth, beams, columns, pedestals, walls, pilecaps etc -

upto plinth level31 a) RMC of mix M 20 from approved source CUM 4,590 Four Thousand Five

Hundred and Ninety only

ii In lintels, shelves, balconies, beams, sunshades, wall, column, roof

slab, staircase, fins, facia etc- above plinth level.32 a) RMC of mix M 20 from approved source CUM 5,614 Five Thousand Six

Hundred and Forteen

only

14 UNDER REAMED PILESa) Providing RCC 1:1:3 excluding steel reinforcement for under reamed

33 i 300mm dia RM 491 Four Hundred and Ninety

One only34 ii 400mm dia RM 909 Nine Hundred and Nine

only35 iii 450mm dia RM 1,162 One Thousand One

Hundred and Sixty Two

onlyb) Providing RCC 1:1:3 excluding steel reinforcement for under reamed

piles with single bulb beyond 6m deep as per IS 2911 etc. complete as

per the approved drawings

36 i 300mm dia RM 440 Four Hundred and Forty

only37 ii 400mm dia RM 760 Seven Hundred and Sixty

only38 iii 450mm dia RM 955 Nine Hundred and Fifty

Five onlyc) Extra cost for providing additional RCC bulb for under reamed piles

including all charges as per direction of IOCL for following sizes of piles

as per the approved drawings

39 i 300mm dia EACH 569 Five Hundred and sixty

Nine only40 ii 400mm dia EACH 916 Nine Hundred and

Sixteen only41 iii 450mm dia EACH 1,123 One Thousand One

Hundred and Twenty

Three only15 PRE-CAST CONCRETE WORKS

42 a) Providing, placing and fixing in position PCC / RCC Pre-cast slab units

in nominal mix of 1:1.5:3 with 20mm downgraded coarse aggregate, as

per approved drawings, including suitable form-work to provide smooth

f inish and thickness as specif ied in the drawings, etc complete.

(Reinforcement shall be measured & paid separately).

CUM 3,915 Three Thousand Nine

Hundred and Fifteen only

43 b) Making and fixing RCC pre-cast concrete kerbing blocks in varying

lengths to suite site conditions out of concrete mix 1:2:4 of desired

shape and size with chamfers and recessed edges as per drawings

including fixing them in position with C.M. 1:3, after excavating required

depth from the ground and consolidating the base, providing PCC1:4:8,

including necessary earthwork, PCC 1:4:8, reinforcement, plastering

etc., complete as per standard drawings and as directed. (Ref. Drawing

No. IOC/CAPEX/153)

CUM 3,649 Three Thousand Six

Hundred and Forty Nine

only

44 16 Making coping for the top of compound wall in plain cement concrete

Mix 1:2:4 upto 75mm thick, including cost of all materials, shuttering,

labour scaffolding etc. and finishing with 12mm thick plastering in CM

1:4 as per standard drawings. (Ref. Drawing No.

IOC/FEATS/CAPEX/831

RM 192 One Hundred and Ninety

Two only




4/63

ITEM

CODESl.

No.


(Rs.)

RATES IN WORDS

(RUPEES)

45 17 Providing and laying PCC screed of average thickness 50 mm in 1:2:4

mix with 12 mm downgraded size coarse aggregate including laying to

slope, curing, finishing top surface to receivewaterproofing treatment or

as shown on drawings or directed, rounding at edges etc. complete

including form-work & shuttering.

SQM 157 One Hundred and Fifty

Seven only

REINFORCEMENT

18 Providing, bending, laying, binding & fixing in posit ion reinforcement

steel of approved make, including supplying & providing soft annealed

wire used for binding at all levels and locations for RCC work with all

leads & lifts

46 a) TMT bars / High Yield Strength deformed bars conforming to IS 1786 KG 59 Fif ty Nine only

IV BRICK MASONRY

19 Brickwork with locally available good quality brick masonry with bricks

having minimum crushing strength of 35 kg/cm2 including scaffolding,

curing, etc. for walls, parapets, etc. below and above plinth at all

levels,joints/wall surface prepared either for pointing or plastering

complete, as per the enclosed detailed specifications, drawings or as

directed by IOCL47 a) Half brick masonry (115mm thick or nearest available size) in cement

mortar 1:4 with hoop iron comprising of 2 Nos. 6mm dia. round bars

after every fourth course

SQM 402 Four Hundred and Two

only

48 b) Full brick masonry (230mm thick or nearest available size) in cement

mortar 1:5 in foundation upto plinth level.

CUM 2,679 Two Thousand Six

Hundred and Seventy

Nine onl49 c) Full brick masonry (230mm thick or nearest available size) in cement

mortar 1:5 in superstructure

CUM 2,799 Two Thousand Seven

Hundred and Ninety Nine

only20 Supplying and laying brick pitching (on edge) with bricks having

minimum crushing strength of 35 kg/cm2 over a layer of sand for

levelling, including filling the interstices with cement mortar 1:3, packing

the bricks ro erl etc. com lete.50 a) 70mm thick SQM 212 Two Hundred and

Twelve only

V STONE MASONRY21 Providing Stone masonry with hard stone below and above plinth at all

levels including scaffolding, dressing of stones, packing interstices,

levelling, curing etc. complete

51 a) Random Rubble Masonry in CM 1:6 CUM 1,434 One Thousand Four

Hundred and Thirty Four

only52 22 Providing size stone masonry (f irst sort) in CM 1:6 with hard stone, in

foundation, plinth and superstructure including scaffolding and all lead

and lifts.

CUM 1,899 One Thousand Eight


only

23 Providing Dry stone rubble packing of required compacted thickness

with hard stones set in regular lines, interstices thoroughly filled &

compacted with small chips / stone grit or any other approved fil ler

material or as directed by IOCL.

53 a) 230 mm. thk. SQM 215 Two Hundred and Fifteen

only54 24 Providing dry stone pitching 225 mm thick laid in courses and required

profile with hammer dressed stones having no side less than 150 mm,

with minimum depth 200 mm including preparing bedding surface,

pointing with CM 1:3 mix, all lead and lifts, etc. complete.

SQM 266 Two Hundred and Sixty

Six only

55 25 Providing laying hard core layer with 80 mm and down size well graded

hard broken stone including packing and fil ling voids with sand by

flooding in foundations.

CUM 1,142 One Thousand One

Hundred and Forty Two

only




5/63

ITEM

CODESl.

No.


(Rs.)

RATES IN WORDS

(RUPEES)

VI CONCRETE BLOCK MASONRY

56 26 Providing solid concrete block masonry in cement mortar 1:6 including

scaffolding, curing, etc. for walls, parapets, etc. above plinth at all

levels, joints / wall surface prepared either for fair face f inish or

plastering and including providing concrete, reinforcement and

shuttering (where required) at all door and window jambs, openings etc.complete as per enclosed specifications. (R.C.C runners, mullions and

transoms shall be measured and paid for separately under concrete,

reinforcement and shutterin items :

CUM 2,616 Two Thousand Six

Hundred and Sixteen

only

VII ANTI-TERMITE TREATMENT

57 27 Providing and injecting chemical emulsion for pre-constructional anti-

termite treatment and creating a chemical barrier as per IS 6313 (Part

II) for walls, trenches, foundation, top surface of plinth filling, foundation

of walls, f loor, along exterior perimeter of building etc. complete,

conforming to manufacturers specifications & as directed by IOCL

using Chloropyriphos Emulsifiable 20 % concentration (The actual

plinth area shall be measured for payment).

SQM 63 Sixty Three only

VIII DAMP PROOF COURSE

58 28 Providing & laying 40 mm thick damp proof coarse in plain cement

concrete mix 1:2:4 using 20mm downgraded coarse aggregate

including providing and mixing water proofing material 'Impermo' orequivalent @ 1Kg per 50Kg of cement and applying bitumen coating of

80/100 grade using 1.7 kg/Sq.m. of bitumen after cleaning the surface

with brushes, etc. complete as per specifications.

M2 140 One Hundred and Forty

only

IX ALUMINIUM WORKS

29 Supply & fixing Aluminium Doors, Windows & Partitions made of

powder coated aluminium sections of minimum coating thickness 15

microns complete as per IS 1948:1961. Item includes all fittings and

accessories complete as specified in detailed description.

59 a) For glazed partitions with 5mm galss as per approved drawings SQM 2,572 Two Thousand Five

Hundred and Seventy

Two only60 b) For fixed glazing with 12mm Glass as per approved drawings SQM 2,791 Two Thousand Seven

Hundred and Ninety One

only

61 c) For fixed glazing with 8mm Glass as per approved drawings SQM 2,436 Two Thousand Four Hundred and Thirty Six

only

62 d) For partly glazed (5mm thick) and partly panelled partitions using 12

mm thick both side laminated exterior grade particle board as per

approved drawings as per approved drawings

SQM 2,616 Two Thousand Six

Hundred and Sixteen

only63 e) For fully panelled partitions using 12 mm thick both side laminated

exterior grade particle board as per approved drawings



onl64 f) For fully glazed (5mm) doors, including providing and fixing hinges,

pivots, all fittings including locking arrangements, concealed tower bolts,

cost of PVC / Neoprene gasket, etc complete as per approved

drawings.

SQM 3,895 Three Thousand Eight

Hundred and Ninety Five

only

65 g) For partly glazed (5mm) partly panelled doors using 12 mm thick, both

side laminated exterior grade particle board including providing and

fixing hinges, pivots, all f itt ings including locking arrangements,concealed tower bolts, cost of PVC / Neoprene gasket, etc complete as

er a roved drawin s.

SQM 3,963 Three Thousand Nine

Hundrd and Sixty Three

only

66 h) For fully panelled doors using 12 mm thick, both side laminated exterior

grade particle board including providing and fixing hinges, pivots, all

fittings including locking arrangements, concealed tower bolts, cost of

PVC / Neoprene gasket, etc complete as per approved drawings.

SQM 3,866 Three Thousand Eight

Hundred and Sixty Six

only

67 i) For fully panelled doors using sandwich panel marine-ply core not less

than 3mm thick faced with 20 gauge powder coated aluminium sheets

including providing and fixing hinges, pivots, all fittings including locking

arrangements, concealed tower bolts, cost of PVC / Neoprene gasket,

etc complete as per approved drawings.

SQM 5,427 Five Thousand Four

Hundred and Twenty

Seven only

68 j) For fully panelled doors using PVC multiwall panels of approved make,

including providing and fixing hinges, pivots, all fittings including lockingarrangements, concealed tower bolts, cost of PVC / Neoprene gasket,

etc complete as per approved drawings.

SQM 3,972 Three Thousand Nine

Hundred and SeventyTwo only




6/63

ITEM

CODESl.

No.


(Rs.)

RATES IN WORDS

(RUPEES)

69 k) For sliding windows using 5 mm thick glass including providing

approved standard hardware, weather strips, glazed channels, nylon

gliders, rubber bumpers in interlocking sections, in-built self locking

arrangements, etc. complete as per approved drawings.

SQM 2,364 Two Thousand Three

Hundred and Sixty Four

Only

70 l) For openable casement windows using 5 mm thick glass includingapproved quality gaskets for proper fixing and making window water

tight, SS frictional / powder coated hinges, handle and other

accessories such as hinges, peg stay, handle etc., complete as per

approved drawings.

SQM 2,937 Two Thousand NineHundred and Thirty

Seven only

71 m) For adjustable louvered ventilators with 4 mm thick pinheaded glass

including necessary accessories like screws, rawl plugs, anodised

aluminium adjustable louver mechanism, all labour charges, sundries,

etc. complete as per approved drawings.

SQM 3,214 Three Thousand Two

Hundred and Forteen

only

30 Providing and fixing glazing using approved plain float glass in

aluminium doors, windows, ventilator shutters and partitions etc., with

PVC / neoprene gasket etc., complete as per approved drawings and

the directions of IOCL. (Item includes replacement of the damaged

glass and disposal of the same.)

72 a) 5 mm thick SQM 512 Five Hundred and Twelve

only73 b) 8 mm thick SQM 838 Eight Hundred and Thirty

Eight only74 c) 12 mm thick SQM 1,110 One Thousand One

Hundred and Ten only31 Providing and fixing ISI marked aluminium tower bolts ISI marked

anodized (anodic coating not less than grade AC 10 as per IS: 1868)

transparent or dyed to required colour or shade with necessary screws

etc. com lete.75 a) 200 x 10 mm EACH 110 One Hundred and Ten

only76 b) 100 x 10 mm EACH 56 Fifty Six only

32 Providing and fixing ISI marked aluminium handle ISI marked anodized

(anodic coating not less than grade AC 10 as per IS: 1868) transparent

or dyed to required colour or shade with necessary screws etc.

com lete.77 a) 125 mm EACH 36 Thirty Six only

78 b) 100 mm EACH 30 Thirty only

79 33 Providing and fixing ISI marked aluminium casement stays ISI marked

anodized (anodic coating not less than grade AC 10 as per IS: 1868)

transparent or dyed to required colour or shade with necessary screws

etc., complete.

EACH 249 Two Hundred and Forty

Nine only

34 FULLY GLAZED ENTRANCE DOOR

80 a) Supply and f ixing of Powder coated Aluminium fully glazed Entrance

door using 12mm thick float glass (includes two side aluminum frame)

including cost of f loor springs, all accessories and as per standard

approved drawings with powder coated aluminium sections.

SQM 3,269 Three Thousand Two

Hundrd and Sixty Nine

only

81 35 Supplying & fixing of aluminium grill of "Decogrille" or equivalent

approved make with 15 micron (min) anodising as per design code No.

DG-107 with aluminium Decogrill make frame of design No. DG-3

complete & DG 6 (H section) including cost and conveyance of all

materials,labour charges, sundries etc. complete as per directions of

IOCL.

SQM 1,614 One Thousand Six

Hundred and Forteen

only




7/63

ITEM

CODESl.

No.


(Rs.)

RATES IN WORDS

(RUPEES)

36 ALUMINIUM DOORS FOR PCF AND SPECIALISED WORKS

82 a) Supplying & f ixing of aluminium door shutters at site with 50 microns

Powder Coated aluminium sections of 83.50 x 44.45 x 3.00 mm (2.107

kg/rmt) with all necessary accessories like door lock, beadings, handles,

screws and rowl plugs etc. including supplying and fixing of 6mm thick

marine ply in fill pannel with 1 mm thk. laminate on both sides including

cost of all materials and labour charges, contigencies etc. complete as

per drawing & design given in all respect. (Main Door Shutters Ply-

Marino-1000-Royal Grey or Equivalent, Aluminium sections-Make Jindal

or equivalent, Aluminium Sections-Powder Coated in Brown Matt Finish

Ply Make-Century / Anchor / Greenply or Equivalent Laminate make -

Marino / Sunmica / Greenlam or Equivalent).

SQM 3,589 Three Thousand Five

Hundred and Eighty Nine

only

83 b) Supplying & f ixing of aluminium door shutters at site with 50 microns

Powder Coated aluminium sections of 83.50 x 44.45 X 3.00 mm (2.107

kg/rmt) with all necessary accessories like door lock, beadings, handles,

screws and rowl plugs etc. including supplying and fixing of 4mm thick

Aluminium Sheets powder coated on both sides including cost of all

materials and labour charges , contigencies etc., complete as per

drawing & design given in all respect. (W. C. Door Shutters Aluminium

sections - Make Jindal or, equivalent, Aluminium Sections - PowderCoated in Brown Matt Finish, Aluminium Sheet -Powder Coated in

Brown Matt Finish)

SQM 5,036 Five Thousand and

Thirty Six only

84 c) Supplying & Fixing of Aluminium door shutters with 50 micron powder

coated aluminium pipe frame section 44.45x25.40x3.20mm(0.605

Kg/rmt) & 50 micron powder coated aluminium door section

20.50x38.10x3.05mm (1.363 kg/rmt) with all necessary accessories like

tubular door lock, beadings, screws etc., including supplying & fixing of

Aluminium sheet 4mm thk. powder coated on both sides and aluminium

louver set powder coated. Aluminium Sheet Make - Jindal or Equivalent,

Aluminium Sections - Make Jindal or Equivaient, Aluminium Sections

Sheet & Louvers Powder Coated - Brown Matt, as Per Drawing &

Design Complete in all respect. (Janitors Cabinet)

SQM 4,724 Four Thousand Seven

Hudred and Twenty Four

only

X FITTINGS & HARDWARES FOR DOORS & WINDOWS37 Providing and fixing following hardware to door shutters with suitable

screws etc. complete as directed.

85 a) Godrej make 6 lever mortice lock with a pair of CP handles (Catalogue

No. Handle LKYLDM605, Mortice Lock LKYLDM606)

EACH 1,320 One Thousand Three

Hundred and Twenty

only86 b) Godrej make keyed cylindrical lock with a pair of Stainless steel knobs

(Catalogue No. LKYPDC527)

EACH 860 Eight Hundred and Sixty

only87 c) Door Stoppers EACH 49 Fourty Nine only

88 d) Supplying and fixing approved make hydraulic door closer including cost

and conveyance of all materials, labour charges for fixing, etc. complete

as per directions of IOCL

EACH 773 Seven Hundred and

Seventy Three only

89 e) Supplying and fixing approved make hydraulic f loor spring with cover

plates including cutting and making good floors for required embedding

in floor, cost and conveyance of all materials, labour charges for fixing,

etc.complete as per directions of IOCL

EACH 2,432 Two Thousand Four

Hundred and Thirty Two

only

90 f) Providing & fixing on doors / windows glass panes of approved make

brown / grey colour sun control f ilm (ref lective type) including all

charges.

SQM 372 Three Hundred and

Seventy Two only

XI ROLLING SHUTTER

38 Providing & fixing rolling shutter made out of 18 gauge steel sheets for

laths, including bottom rail, guide channels, lock plates, locking

arrangement, fixing bolts, pulling handles, hood, rolling arrangement,

standard make springs in brackets, necessary bearings, etc. including

fixing of frames with rag bolts, grouting of parts in position etc. and also

including two coats of zinc phosphate primer and two coats of synthetic

enamel paint of approved colour, shade & brand etc. complete as per

relevant IS standard or as per manufacturer's specif ications or as

directed by IOCL.91 a) Self-coiling type rolling shutter. SQM 2,485 Two Thousand Four

Hundred and Eighty Five

only




8/63

ITEM

CODESl.

No.


(Rs.)

RATES IN WORDS

(RUPEES)

92 b) Gear operated type-rolling shutters with gear box and crank handle at

waist level on outside.

SQM 2,969 Two Thousand Nine

Hundred and Sixty Nine

onl39 Same as item No.38 above but with grill of size 600mm high

93 a) Self-coiling type rolling shutter SQM 2,694 Two Thousand SixHundrd and Ninety Four

only

94 b) Gear operated type-rolling shutters with gear box and crank handle at

waist level on outside.

SQM 3,178 Three Thousand One

Hundred and Seventy

Eight only

XII PLASTERING AND POINTING

40 Providing & applying cement plaster for walls, columns, beams etc.

including chipping concrete surface if required, finishing, scaffolding,

curin etc. com lete:95 a) Cement plaster 12mm thick in CM 1:4 SQM 78 Seventy Eight only

96 41 Providing & applying 6 mm thick plain faced cement plaster in CM 1:3

for underside of ceilings including hacking / chipping concrete surface,

finishing, scaffolding, curing, etc. complete.

SQM 61 Sixty One only

97 42 Providing and applying 20 mm thick cement plaster in CM 1:4 in two

coats, under layer 10mm thick (rough) and top layer 10mm thick floated

hard and trowelled smooth including chipping concrete surface

wherever re uired curin scaffoldin etc. com lete.

SQM 121 One Hundred and

Twenty One only

43 Making grooves, bands, copings, drip course, etc. complete in plastered

surface in CM 1:3 as per approved drawings and instructions of IOCL,

etc. complete

98 a) Grooves (horizontal / vertical) as per approved drawings upto 10mm

wide and 10mm deep

RM 14 Forteen only

99 b) Providing 12mm thick plastering for Drip course of size as per

drawings but not ess than a width of 20mm with cement mortar 1:4

including scaffolding, curing, finishing, etc. complete:

RM 18 Eighteen only

100 44 Providing and f ixing of 200mm wide chicken wiremesh of 24 gauge at

the junction of brickwork and RCC work, including fixing with nails, rawl

plugs etc; before applying plaster.

SQM 37 Thirty Seven only

45 Providing Pointing in brick masonry / Rubble masonry in cement sand

mortar 1:3 at all levels including raking joints, scaffolding, curing etc.

complete for :

101 a) Flush pointing SQM 48 Forty Eight only

102 b) Ruled pointing SQM 51 Fifty One only

103 46 Providing & applying cement plaster 1:3 12mm thick with neat cement

flushing coat including chipping concrete surface if required, finishing,

scaffolding, curing, etc., complete

SQM 110 One Hundred and Ten

only

XIII FLOOR FINISHES, SKIRTING AND DADO

47 Providing and laying 1st quality white ceramic glazed wall tiles of

approved make of minimum thickness 5mm as approved by the

Engineer-in-Charge in skirting, dado, risers, etc. over 12mm thick

cement mortar 1:3 mix, jointing with grey cement slurry and pointing

with tile joint filler of approved make, including cost of all materials,

labour, etc., complete.

104 a) 200 x 300 SQM 572 Five Hundred andSeventy Two only

48 Providing and laying 1st quality coloured ceramic glazed wall tiles of

minimum thickness 5mm of approved make in all colours/shades of

following sizes as approved by the Engineer-in-Charge in skirting, dado,

risers, etc. over 12mm thick cement mortar 1:3 mix, jointing with grey

cement slurry including pointing with tile joint filler of approved make

and shade, cost of all materials, labour etc., complete

105 a) 200 x 300 SQM 575 Five Hundred and

Seventy Five only106 b) 300 x 400 SQM 702 Seven Hundred and Two

only




9/63

ITEM

CODESl.

No.


(Rs.)

RATES IN WORDS

(RUPEES)

49 Providing and laying 1st quality ceramic floor tiles (including treads) of

minimum thickness 8mm of approved make in all colours/shades of

following sizes as approved by the Engineer-in- Charge over 20mm

thick cement mortar 1:4 mix, jointing with grey cement slurry including

pointing with tile joint filler of approved make and shade, of matching

shade including cost of all materials, labour etc., complete107 a) 300 x 300 SQM 560 Five Hundred and Sixty

only108 b) 400 x 400 SQM 607 Six Hundred and Seven

only109 c) 600 x 600 SQM 723 Seven Hundred and

Twenty Three only50 Providing and laying of 1st quality vitrified ceramic floor tiles (including

treads) of approved make in all colours/shades of following sizes of

thickness as specified by the manufacturer and as approved by the

Engineer-in-Charge over 20mm thick cement mortar 1:4 mix, jointing

with grey cement slurry including pointing with tile joint filler of approved

make and shade, including cost of all materials, labour etc., complete

110 a) 400 x 400( minimum dimensions and thickness 7.5 8 mm) SQM 1,017 One Thousand and

Seventeen only111 b) 600 x 600( minimum dimensions and thickness 9.6 10 mm) SQM 1,176 One Thousand One

Hundred and Seventy Six

only112 51 Providing and laying 50 mm thick Indian Patent Stone flooring, treads,

landings, etc. comprising of 38 mm thick under layer of cement

concrete 1:2:4 ( with graded stone aggregates of nomial size 12.5mm)

and 12 mm thick top layer in cement mortar 1:1 including preparation of

base, supplying & providing glass strips of size 40mm x 4mm in joints,

rounding corners and junctions, casting in chequered board pattern,

finishing, shuttering, curing, etc. complete

SQM 322 Three Hundred and

Twenty Two only

113 52 Supplying and laying of pressed cement concrete tiles of minimum

thickness 20mm of approved make, size & colour with necessary 20mm

thick CM 1:4 bedding, jointed with neat cement slurry including pointing

with white cement mixed with pigment to match the shade of the tiles

including rubbing & cleaning, preparation of base, cost of all materials

and labour etc., complete.

SQM 774 Seven Hundred and

Seventy Four only

114 53 Supplying and laying of plain white marble of 18 mm thick (sample of

marble shall be approved by Engineer-in-charge) over 20mm (average)

thick CM 1:4 bedding and jointed with white cement slurry including

rubbing, mirror polishing, cost of all materials and labour etc., complete

SQM 1,663 One Thousand Six

Hundred and Sixty Three

only

115 54 Supplying and fixing of 10mm thick mirror polished black granite tiles for

f looring / pump island edges etc. over 12mm thick CM 1:4 including

sprinkling sand after applying Araldite, cost of all materials and labour

etc. complete.

SQM 1,498 One Thousand Four

Hundred and Ninety

Eight only

116 55 Supplying and fixing of mirror polished black granite slab of 18-20 mm

thick for flooring / pump island including bedding in cement mortar 1:4,

20mm thick, sprinkling sand after applying Araldite, cost of all material

and labour etc., complete (Payment for nosing will be made separately

under res ective item


Hundred and Fifty Five

only

56 Providing edge nosing for granite slabs including all charges.

117 a) Half round edge nosing (Quarter portion of circle) RM 211 Two Hundred and Eleven

only

118 b) Full round edge nosing (Half portion of circle) RM 245 Two Hundred and Forty

Five only

57 Supplying and fixing of cudappa slab in shelves for buildings

119 a) 25mm thick both side polished jointed with CM 1:4 SQM 719 Seven Hundred and

Nineteen only58 Supplying and laying of approved Kota stone slabs (sample of stone

shall be approved by Engineer-in-charge) of specified size over 20mm

thick bedding in CM 1:4 and jointed with grey cement slurry mixed with

pigment to match the shade of the slab including rubbing and polishing

complete

120 a) 25mm thick in flooring SQM 624 Six Hundred and TwentyFour only




10/63


11/63

ITEM

CODESl.

No.


(Rs.)

RATES IN WORDS

(RUPEES)

135 71 Supplying & f ixing of 16 gauge GI plain sheet of approved make with

necessary folding / fabrication using hydraulic press for flashing sheet /

fascia, etc. in roofing / buildings / sheds, hoardings, etc. including all

necessar fixtures etc. com lete

SQM 1,083 One Thousand Eighty

Three only

136 72 Supplying & fixing of 18 gauge MS sheet with necessary folding /

fabrication using hydraulic press for f lashing sheet / fascia, etc. inroofing / buildings / sheds, hoardings, etc. including all necessary

fixtures etc., complete

KG 71 Seventy One only

137 73 Supplying & fixing of 16 gauge MS sheet with necessary folding /

fabrication using hydraulic press for f lashing sheet / fascia, etc. in

roofing / buildings / sheds, hoardings, etc. including all necessary



138 74 Supplying & fixing of 14 gauge (2 mm) MS sheet with necessaryfolding

/ fabrication using hydraulic press for flashing sheet / fascia, etc. in

roofing / buildings / sheds, hoardings, etc. including all necessary



139 75 Supplying & fixing of 22 gauge GI corrugated sheet of approved make

including necessary J/L bolts, nuts, washers, all labour charges,

scaffolding, sundries etc. complete.

SQM 738 Seven Hundred and

Thirty Eight only

140 76 Supplying & fixing 18 gauge GI ridges fabricated out of GI sheets of

approved make as per specifications including all the necessary fittings,

fastners, etc. complete

RM 256 Two Hundred and Fifty

Six only

141 77 Supplying & f ixing half round PVC gutters 160 mm of approved make

as per specifications including all the necessary fittings, fastners, etc.

complete

RM 229 Two Hundred and

Twenty Nine only

142 78 Supplying & f ixing of 6 mm thick corrugated AC sheet of approved for

roofing / wall cladding etc. including necessary J/L bolts, nuts, washers,

all labour charges, scaffolding, sundries etc. complete.

SQM 192 One Hundred and Ninety

Two only

143 79 Supplying & fixing 6 mm thick AC ridges of approved make as per

standard practice including all the necessary fittings, fastners, etc.

complete

RM 173 One Hundred and

Seventy Three only

144 80 Providing and fixing 700mm wide rain water gutter fabricated out of 18

Gauge Aluminium Sheets of 1200 mm width including MS clamp

supports, fittings, fastners, etc. complete, as per detailed drawings. (No

oints shall be rovided in the utter

RM 1,148 One Thousand One

Hundred and Forty Eight

only

145 81 Providing and fixing 700mm wide rain water gutter fabricated out of 18

Gauge GI Sheets of 1200 mm width including MS clamp supports,

fittings, fastners, etc. complete, as per detailed drawings.

RM 1,006 One Thousand and Six

only

146 82 Providing and f ixing Klippon Galvalume / Zincalume 0.55 mm TCT or

equivalent steel roofing system of approved make conforming to

ASTM:A446 as per standard specifications & manufacturers

instructions, etc. complete as directed by IOCL

SQM 1,121 One Thousand One

Hundred and Twenty

One only

147 83 Providing and fixing ridges suitable for Klippon roofing system 500 mm

wide 0.55 mm TCT equivalent of approved make conforming to

ASTM:A446 as per standard specifications & manufacturers

instructions, etc.complete as directed by IOCL

RM 903 Nine Hundred and Three

only

148 84 Providing and f ixing High Rib Galvalume / Zincalume 0.47 mm TCT or

equivalent steel roofing system of approved make as per standard

specifications & manufacturers instructions, etc. complete as directed

by IOCL

SQM 805 Eight Hundred and Five

only

149 85 Providing and fixing ridges suitable for High Rib Galvalume / Zincalume

roofing system 500 mm wide 0.47 mm TCT equivalent of approved

make as per standard specifications & manufacturers instructions,

etc.com lete as directed b IOCL

RM 644 Six Hundred and Forty

Four only

150 86 Providing and fixing High Rib coloured Galvalume / Zincalume 0.50 mm

TCT or equivalent steel roof ing system of approved make as per

standard specifications & manufacturers instructions, etc. complete as

directed by IOCL

SQM 920 Nine Hundred and

Twenty only

151 87 Providing and fixing ridges suitable for High Rib coloured Galvalume /

Zincalume roofing system 500 mm wide 0.50 mm TCT equivalent of

approved make as per standard specif ications & manufacturers

instructions, etc.complete as directed by IOCL

RM 759 Seven Hundred and Fifty

Nine only

XVI FALSE CEILING




12/63

ITEM

CODESl.

No.


(Rs.)

RATES IN WORDS

(RUPEES)

152 88 Supply and installation of false ceiling system of approved make as per

vendor list comprising of 150/200 mm wide panels (150F/200F

including filler strips, if any) formed out of pre-coated, weather resistant

and petroleum fumes resistant steel panels coated in white colour

including the cost of providing and fixing rigid suspension arrangement

as per drawings and specifications. The direction of the panel should beperpendicular to the road. The manufacturers specifications should be

made available to the Site Engineer and the work should be executed

strictly as per manufacturers specification.

SQM 1,265 One Thousand Two

Hundred and Sixty Five

only

153 89 Providing and Fixing TRAC -Tile or Equivalent False ceiling inside the

Sales rooms and Convineos, comprising of 600 mm x600 mm size

aluminium tiles as per specifications including glass wool insulation

above the false ceiling and as directed by the IOCL.

SQM 2,013 Two Thousand and

Thirteen only

154 90 Providing Gypsum board false ceiling of 12.5 mm thick tapered edge

gypsum board using standard GI sections including scaffolding,

labour, making necessary cutouts, sundries etc. complete as per

standard specifications and as directed by IOCL.

SQM 573 Five Hundred and

Seventy Three only

XVII PROVIDING & CONSTRUCTING DRIVEWAYS

A FLEXIBLE PAVEMENTS

155 91 Providing Granular sub-base for the specified depth in layers of 200mmthick, using well graded gravel or natural sand & gravel / crushed stone

mix as per IS sieve designation 26.5mm to 0.075mm with minimum

CBR value of 20%. The material passing 425 microns sieve to be tested

according to IS:2720 (Part V) shall have liquid limit and plasticity index

not more than 25% and 6% respectively. The granular sub base to be

compacted to 95% of the maximum dry density with 8-10 ton road roller.

CUM 840 Eight Hundred and Fortyonly

156 92 Providing and laying WBM 100 mm thick consolidated thickness for

bottom layer (GRADE I) of sub base, metal size ranging from 90 to

45mm with screenings (13.2 mm and less) and binding materials to fill

the voids and compacted with 8-10 Ton road roller including all charges.

SQM 130 One Hundred and Thirty

only

157 93 Providing and laying WBM 75 mm thick consolidated thickness

(GRADE II) for middle layer of sub base metal size ranging from 63 to

45 mm with screeingings (13.2 mm and less) and binding materials to

fill the voids and compacted with 8-10 Ton road roller including all

charges.


Twelve only

158 94 Providing and laying WBM 75 mm thick consolidated thickness

(GRADE III) for top layer of sub base metal size ranging from 53 to 22.4

mm with screeingings (13.2 mm and less) and binding materials to fill

the voids and compacted with 8-10 Ton road roller including all charges.


Twelve only

159 95 Providing and laying wet mix macadam base course using 45 mm and

down graded aggregates, including mixing, laying and compacting

clean, crushed and graded aggregates and granular material premixed

with water to a dense mass on a prepared subbase in accordance with

the requirements of the specifications, drawings and as directed by

IOCL.

CUM 1,170 One Thousand One

Hundred and Seventy

only

160 96 Providing and laying rubble of size 150mm to 230mm for soling

including levelling, hand packing, blinding, wedging to a thickness of230mm average and consolidating by 8-10 tonnes road roller etc.

complete.

CUM 610 Six Hundred and Ten

only

97 BITUMINOUS MACADAM

161 a) Providing and laying Bituminous Macadam of 75mm thick with

compacted crushed aggregates of size ranging from 45mm to 22.4mm

premixed with a bituminous binder (grade 80/100) laid immediately after

mixing over the base and compacted with 8 to 10 tonnes road roller etc.,

complete

SQM 355 Three Hundred and Fifty

Five only

162 98 Providing 75mm thick Built Up Spray Semigrout using 40mm IRC size

HBG machine crushed metal laid over a tack coat over the existing B.T

surface as per detailed specifications.

SQM 264 Two Hundred and Sixty

Four only

99 PREMIX CARPET (OTHER THAN HOT MIX PLANT PREMIX AND

USE OF MECHANICAL PAVER FOR THE APPROACH ROAD /

INSIDE OUTLET)




13/63


14/63

ITEM

CODESl.

No.


(Rs.)

RATES IN WORDS

(RUPEES)

100 SEAL COAT

166 a) Providing and laying 6 mm thick seal coat with tack coat including

preparing surface of road with bitumen heated in bitumen boiler fitted

with the spray set spraying using 98 kg of bitumen of grade 80/100 and

blindng surface with 0.90 cum of stone aggregate of 6.3mm size

(passing 11.2mm sieve and retained on 2.36mm sieve only) per 100SQM of road surface including rolling and finishing with power road

roller all complete.

SQM 69 Sixty Nine only

101 PREMIX CARPET USING HOT MIX PLANT PREMIX AND USE OF

MECHANICAL PAVER FOR THE APPROACH ROAD / INSIDE

OUTLET.

167 a) Providing and laying 50mm premix bituminous macadam base course

with stone aggregate of quality size and grading as specif ied in

technical specification and straight run bitumen of grade 80/100 @3.5%

by weight of total mix including hot mixing of stone aggregate and

bitumen in hot mix plant, transporting mixed material and laying mixed

material with paver finisher to the required level and grade, rolling with

road roller of 8 to 10 tonne capacity to achieve the required compaction

and density.

SQM 277 Two Hundred and

Seventy Seven only

168 b) Providing, laying and consolidation, semi dense bituminous concrete on

prepared surface, with specified graded crushed aggregates as per

technical specification for wearing course, including, heating, course,

including, heating, aggregate and binder in hot mix plant, laying to

uniform consolidated thickness of 25mm, and rolling with 8 - 10 power

roller to required compaction over a tack coat of 2.0 Kg per 10 Sqm.

(Using bitumen of grade 80/100)


Seventy Seven only

169 c) Providing and laying 50mm premix bituminous macadam base course

with stone aggregate of quality size and grading as specif ied in

technical specification and straight run bitumen of grade 60/70 @3.5%

by weight of total mix including hot mixing of stone aggregate and

bitumen in hot mix plant, transporting mixed material and laying mixed

material with paver finisher to the required level and grade, rolling with

road roller of 8 to 10 tonne capacity to achieve the required compaction

and density.

SQM 282 Two Hundred and Eighty

Two only

170 d) Providing, laying and consolidation, semi dense bituminous concrete on

prepared surface, with specified graded crushed aggregates as per

technical specification for wearing course, including, heating, course,

including, heating, aggregate and binder in hot mix plant, laying to

uniform consolidated thickness of 25mm, and rolling with 8 - 10 power

roller to required compaction over a tack coat of 2.0 Kg per 10 Sqm.

(Using bitumen of grade 60/70)

SQM 180 One Hundred and Eighty

only

102 CONCRETE PAVER BLOCKS

Providing and laying Pre-cast cement concrete block paved driveway

including supplying 80mm thick pre-cast machine made cement

concrete block of approved size, shape, shade and manufacturers and

as per IOCL's specifications. The paver blocks shall have peripheral

chamfer, with average crushing strength not less than 40 N/Sq.mm as

per BS6717 Part -1(1986), maximum water absorption of 2% after 10

minutes and 5% after 24 hrs. as per BS 1881, maximum dimensional

deviations of +/- 2mm on length & width and +/- 3mm on on thickness.

The job includes supplying & laying a layer of 50mm thick clean course

sand on thoroughly compacted sub-base below the paver blocks,

cutting the paver blocks wherever required with hydraulic splitter, filling

in the joints at the edges of paver blocks with sand,compacting with

machine vibrator to required line and level, etc. complete. (Payment for

provision of edge restraints shall be made separately)

171 a) with 80mm thick paver blocks (grey / coloured) SQM 706 Seven Hundred and Six

only172 b) with 80mm thick paver blocks (reflective) SQM 930 Nine Hundred and Thirty

only




15/63

ITEM

CODESl.

No.


(Rs.)

RATES IN WORDS

(RUPEES)

B RIGID PAVEMENTS

173 103 Providing and laying design mix reinforced cement concrete in roads /

drive-ways works of Grade M25 having test beam flexural strength of

minimum 35 kg / Sq.cm at 28 days using minimum 330 kg of cement

per cubic metre of concrete, coarse sand and graded stone aggregates

of 20 mm nominal size in appropriate proportions as per IOCLspecification, including dewatering with vacuum pump, finishing the the

floor with power trowel and well compacted with plate compactor using

double beam screed vibrator with proper side shuttering (Rate shall

include cost of shuttering & vacuum dewatering. Payment for

reinforcement shall be made separately)

CUM 4,297 Four Thousand Two

Hundred and Ninety

Seven only

174 104 Supplying & fixing in position 25mm thick bitumen imprignated fibre

board "SHALITEX" or equivalent, as approved by Engineer-in-charge,

conforming to IS 1838 including cost of primer, sealing compound with

bitumastic filler to a depth of 50mm etc. in the expansion joints etc. as

per drawings, specfications and directions of IOCL complete.

SQM 679 Six Hundred and Seventy

Nine only

175 105 Making thermal expansion joints by providing grooves 1/4 depth of

concrete thickness and filling with polysulphide sealing compound (2

pack system) for a size of 20 mm x 15 mm with lower portion filled with

filler material as per drawings, specfications and directions of IOCLcomplete.

RM 331 Three Hundred and

Thirty One only

XVIII RCC Hume Pipes

106 Supplying and laying RCC Hume pipes of NP2 class conforming to IS

458 under driveway and for culverts including excavation, providing

collar joints, backfilling, etc. complete as directed by IOCL.

176 a) 150 mm dia. RM 440 Four Hundred and Forty

only177 b) 200 mm dia. RM 548 Five Hundred and Forty

Eight only178 c) 300 mm dia. RM 722 Seven Hundred and

Twenty Two only107 Supplying and laying RCC Hume pipes of NP3 class conforming to IS

458 under driveway and for culverts including excavation, providing

collar joints, backfilling, etc. complete as directed by IOCL.

179 a) 350mm dia RM 1,375 One Thousand ThreeHundred and Seventy

Five only180 b) 450mm dia RM 1,816 One Thousand Eight

Hundred and Sixteen

only181 c) 600 mm dia. RM 2,445 Two Thousand four

Hundred and Forty Five

only182 d) 900 mm dia RM 4,204 Four Thousand Two

Hundred and Four only183 e) 1000mm dia RM 4,949 Four Thousand Nine

Hundred and Forty Nine

only184 f) 1200 mm dia RM 6,956 Six Thousand Nine

Hundred and Fifty Six

only

108 Supplying and laying RCC Hume pipes of NP 4 Class (without collars)

conforming to IS 458 under driveway and for culverts including

excavation, providing collar joints, backfilling, etc. complete as directed

b IOCL.185 a) 450 mm dia RM 1,758 One Thousand Seven

Hundred and Fifty Eight

only

186 b) 600mm dia RM 2,499 Two Thousand Four


only

187 c) 1000 mm dia RM 4,818 Four Thousand Eight

Hundred and Eighteen

only

188 d) 1200 mm dia RM 7,021 Seven Thousand andTwenty One only




16/63

ITEM

CODESl.

No.


(Rs.)

RATES IN WORDS

(RUPEES)

XIX STRUCTURAL STEEL WORKS

109 Supplying and fabricating (Shop Fabrication to be done as per

specifications and approved fabrication drawings), transporting to site &

erecting structural steel members for canopy and other works including

two coats of zinc phosphate primer and two coats of synthetic enamel

paint, provision of necessary erection bolts, nuts, washers, cleats,stiffeners, gussets, base plate and all operations such as, but not

limited to, preheating as per specifications, straightening, cutting,

drilling, grinding etc. complete. (Weight of erection bolt and welds shall

not be considered for a ment189 a) Members fabricated from rolled steel sections/plates/strips, etc KG 68 Sixty Eight only

190 b) Members fabricated from tubular sections KG 79 Seventy Nine only

191 110 Extra over and above item No. 109 for structural steel work for painting

polyurethene paint using zinc ethyl sil icate primer, polyamid mio

undercoat,and alphatic acrylic polyurethene finish paint, instead of two

coats of zinc phosphate primer and two coats of synthetic enamel

aint includin all char es.

KG 4 Four only

192 111 Supplying & fixing MS security gril ls of approved design for windows,

ventilators, doors etc., welded type using MS rounds, MS squares, MS

flats etc. including painting two coats of zinc phosphate primer and two

coats of synthetic enamel paint, etc. complete as per drawings anddirections of IOCL.

KG 74 Seventy Four only

193 112 Supplying & fixing MS gratings of welded type for drain covers using

MS flats and angles, including painting two coats of zinc phosphate

primer and two coats of synthetic enamel paint, etc. complete as per

drawin s and directions of IOCL.

KG 77 Seventy Seven only

113 Supplying and fixing MS foundation bolts with necessary GI nuts and

washers of specified sizes, all conforming to relevant Indian Standards

and as a roved b En ineer-in-char e :194 a) Bolts of all sizes upto and including 450 mm length. KG 99 Ninety Nine only

195 b) Bolts of all sizes above 450 mm length. KG 97 Ninety Seven only

196 114 Providing & fixing concertina fencing comprising of GI concertina strips

and barbed wire of 12SWG, 2 strands & 4 point including MS angle

posts, straightening, fixing with MS angle post using clips, drilling holes,

painting MS bar / angles with two coats of zinc phosphate primer and

two coats of aluminium paint etc. complete as per drawing No. DRG.

No. ENG/ 404-3/3, and as per directions of IOCL.

RM 519 Five Hundred and

Nineteen only

197 115 Providing and f ixing chain link fencing, having mesh 50mmx50mm

made out of 10 gauge hot dipped galvanised wire and barbed wire of

12SWG, 2 strands & 4 point with necessary nuts, bolts, washers and

other fixtures required, painting MS bar / angles with two coats of primer

and two coats of aluminium paint etc. complete as per drawing No.

DRG. No. ENG/ 403-1/2, 2/2 and specif ications. (The rate for civil

works like excavation, brick masonry, PCC etc. shall be paid

se aratel .

RM 1,001 One Thousand and One

only

198 116 Providing and f ixing chain link fencing, using 10SWG GI wire 50mm

square mesh fixed with 25 mm square tube of 16 guage with vertical

post of 50 mm x 50 mm with necessary nuts, bolts, washers and other

fixtures required, painting two coats of zinc phosphate primer and two

coats of aluminium paint etc. complete as per drawing No.

IOC/CAPEX/154 A and specifications. (The rate for civil works likeexcavation, brick masonry, PCC etc. shall be paid separately).

RM 950 Nine Hundred and Fifty

only

XX BORE WELL

117 Drilling Borewell

199 a) Identifying the point for drilling the bore well. LS 2,500 Two Thousand and Five

Hundred only200 b) Drilling 165mm-180mm diaborewell up to a depth of 65RM inclusive of

all works necessary for commissioning.

RM 286 Two Hundred and Eighty

Six only201 c) Drilling165mm-180mm dia borewell f rom 65 - 100RM inclusive of all

works necessary for commissioning

RM 325 Three Hundred and

Twenty Five only202 d) Drilling 165mm-180mm dia borewell a beyond 100RM inclusive of all

necessary for commissioning.

RM 401 Four Hundred and One

only203 e) Supplying and fixing high density polymer air pipe of 12mm dia for

borewell upto a depth of 65RM.

RM 36 Thrity Six only

204 f) Supplying and fixing high density polymer air pipe of 12mm dia for

borewell from 65 -100RM.

RM 41 Forty One only

205 g) Supplying and fixing high density polymer air pipe of 12mm dia for borewell beyond 100RM.

RM 47 Forty Seven only




17/63


18/63

ITEM

CODESl.

No.


(Rs.)

RATES IN WORDS

(RUPEES)

235 g) 75mm (6 kg/cm2) RM 126 One Hundred and

Twenty Six only236 h) 110mm (6 kg/cm2) RM 237 Two Hundred and Thirty

Seven only237 i) 160mm (6 kg/cm2) RM 482 Four Hundred and Eighty

Two only125 VITREOUS CHINA ORISSA PATTERN WC

238 a) Providing & f ixing f irst quality white vitreous china orissa pattern WC

squatting pan of size 580 x 440 mm with 10 litre PVC low level flushing

cistern with all fittings as per detailed specifications.

EACH 3,120 Three Thousand One

Hundred and Twenty

only239 b) Providing & fixing first quality coloured vitreous china orissa pattern WC

squatting pan of size 580 x 440 mm with 10 litre PVC low level flushing

cistern with all fittings as per detailed specifications.

EACH 3,634 Three Thousand Six

Hundred and Thirty Four

only

126 VITREOUS CHINA EUROPEAN TYPE WC

240 a) Providing & fixing first quality white vitreous china European type WC

pan with 10 litre PVC low level flushing cistern and seat cover with all

fittings as per detailed specifications.

EACH 2,920 Two Thousand Nine

Hundred and Twenty

only241 b) Providing & fixing first quality coloured vitreous china European type

WC pan with 10 litre PVC low level flushing cistern and seat cover with

all fittings as per detailed specifications.

EACH 3,477 Three Thousand Four

Hundred and Seventy

Seven only

127 SOLID PLASTIC SEAT COVER FOR EWC242 a) Providing and fixing solid plastic seat and lid of approved make for

European type WC pan including all charges.

EACH 316 Three Hundred and

Sixteen only243 b) Providing and fixing coloured solid plastic seat and lid of approved

make for European type WC pan including all charges.

EACH 443 Four Hundred and Forty

Three only128 PVC FLUSHING CISTERN

244 a) Providing & fixing 10 litres white PVC flushing cistern including

supporting brackets, mosquito proof coupling of approved make, pull

handle, etc. complete as directed by IOCL. (Item includes removing the

old fittings in case of replacement without any extra cost)

EACH 963 Nine Hundred and Sixty

Three only

245 b) Providing & fixing 10 litres coloured PVC flushing cistern including

supporting brackets, mosquito proof coupling of approved make, pull

handle, etc. complete as directed by IOCL. (Item includes removing the

old fittings in case of replacement without any extra cost)

EACH 993 Nine Hundred and Ninety

Three only

129 FLAT BACK OR CORNER TYPE URINAL

i Providing & fixing white vitreous china flat back or wall corner type

lipped front urinal basin of the following sizes with drain pipe and all

fittings complete as directed by IOCL. (Item includes removing the old

fittings in case of replacement without any extra cost)

246 a) 430 x 260 x 350mm size flat back urinal. EACH 1,512 One Thousand Five

Hundred and Twelve only

247 b) 430 x 265 x 340mm size angle back urinal EACH 1,652 One Thousand Six

Hundred and Fifty Two

onlyii Providing & f ixing coloured vitreous china f lat back or wall corner type

lipped front urinal basin of the following sizes with drain pipe and all

fittings complete as directed by IOCL. (Item includes removing the old

fittings in case of replacement without any extra cost)

248 a) 430 x 260 x 350mm size flat back urinal. EACH 1,745 One Thousand Seven

Hundred and Forty Five

only249 b) 430 x 265 x 340mm size angle back urinal EACH 1,955 One Thousand Nine

Hundred and Fifty Five

onl130 FLAT BACK WASH BASIN

250 a) Providing & fixing white vitreous china flat back wash basin of size

550mm x 400mm with CI brackets painted white with 15mm CP brass

pillar tap and angle valve, CP brass waste coupling with rubber plug,

pattern, 32mm dia CP brass bottle trap & its unions, including cutting &

making good the wall & floor surface/ tiled surface wherever required.

(Item includes removing the old fittings in case of the replacement

without an extra cost.

EACH 2,933 Two Thousand Nine

Hundred and Thirty

Three only




19/63

ITEM

CODESl.

No.


(Rs.)

RATES IN WORDS

(RUPEES)

251 b) Providing & fixing coloured vitreous china flat back wash basin of size

550mm x 400mm with CI brackets painted white with 15mm CP brass

pillar tap and angle valve, CP brass waste coupling with rubber plug,

pattern, 32mm dia CP brass bottle trap & its unions, including cutting &

making good the wall & floor surface/ tiled surface wherever required.

(Item includes removing the old fittings in case of the replacementwithout any extra cost.)

EACH 3,236 Three Thousand Two

Hundred and Thirty Six

only

252 131 Supplying & f ixing concealed battery operated electronic f lushing

system of approved make, for urinals including all charges as per the

requirements of IOCL. CERA Cat. No. 6904 or appd. equivalent.

EACH 6,243 Six Thousand Two

Hundred and Forty Three

only

132 Supplying & f ixing the following of approved quality f ittings as per

IOCL's requirements and instructions.

253 a) Providing & fixing CP brass towel rail, of 1.25mm wall thickness pipe &

600mm long

EACH 256 Two Hundred and Fifty

Six only254 b) Providing & fixing CP brass toilet paper holder of appd. make and

quality

EACH 292 Two Hundred and Ninety

Two only

255 c) Providing & fixing CP brass liquid soap container of appd. make &

quality

EACH 348 Three Hundred and Forty

Eight only

256 d) Providing & f ixing white viterous china recessed pattern soap tray of

size 216 x 108mm.

EACH 325 Three Hundred and

Twenty Five only

257 e) Providing & fixing coloured viterous china recessed pattern soap tray of

size 216 x 108mm

EACH 430 Four Hundred and Thirty

only258 f) Providing & fixing 600mm x 450mm and min. 5.5mm thick bevelled

edge mirror of approved make with 6mm thick approved marine ply

backing, CP brass hanging hooks, fixing screws, etc.

EACH 578 Five Hundred and

Seventy Eight only

259 g) Providing & f ixing 15 mm CP brass angle valve of appd. make & quality EACH 520 Five Hundred and

Twenty only

260 h) Providing & f ixing 15 mm CP brass pillar cock of appd. make & quality EACH 541 Five Hundred and Forty

One only

261 i) Providing & fixing 15 mm CP brass concealed stop cock with wall

flange of approved make & quality


Twenty Three only

262 j) Providing & fixing 20 mm CP brass concealed stop cock with wall

flange of approved make & quality


Seventy One only263 k) Providing & fixing 15 mm CP brass long body bib cock of approved

make & quality

EACH 630 Six Hundred and Thirty

only264 l) Providing & f ixing overhead CP adjustable spray shower of approved

make & quality with shower arm.

EACH 416 Four Hundred and

Sixteen only265 133 Providing & fixing ball valve for garden of 15 mm dia of approved make

& quality

EACH 241 Two Hundred and Forty

One only266 134 Supplying & fixing cast iron floor trap (Nahani) of 100mm inlet & 75mm

outlet of self cleansing design with cast iron screwed down or hinged

grating with or without vent arm complete, including cost of cutting and

making good walls & floor surface etc. complete.

EACH 557 Five Hundred and Fifty

Seven only

267 135 Supplying & fixing best qualityPVC floor trap (Multi trap) of 100mm inlet

and 75mm outlet of self cleansing design including cost of cutt ing

making good walls & floor surface.

EACH 230 Two Hundred and Thirty

only

136 Supplying, laying and jointing glazed stoneware pipes grade A with stiff

mixture of cement in the proportion 1:3 over 100 mm CC bed of 1:3:6,

including excavation to the required depth, back fil ling, watering,

consolidation, making necessary connections with fittings, testing of

joints etc. complete

268 a) 100mm dia. RM 364 Three Hundred and Sixty

Four only269 b) 150 mm dia. RM 413 Four Hundred and

Thirteen only270 137 Supplying & fixing SW gully trap of grade "A" complete with CI grating,

brick masonry chamber & water tight CI cover, with frame of 300 x

300mm size (inside) The weight of Cover shall be min. 4.50 Kg and that

of frame 2.70 KG. Item includes required excavation, back filling, PCC,

brickwork, plastering in CM1:4, etc. complete

EACH 1,272 One Thousand Two

Hundred and Seventy

Two only

271 138 Construction of brick masonry inspection chamber/manhole of 600 x

600 x 750mm internal dimension with RCC cover slab 150 mm thick

including necessary excavation, CC 1:4:8, 100mm thick in foundation,

brick masonry, plastering in CM 1:3 on all exposed surfaces and inside

the manhole, with a floating coat of neat cement & making channels in

CC 1:2:4 in bed, complete including curing etc. complete

EACH 3,899 Three Thousand Eight


only




20/63

ITEM

CODESl.

No.


(Rs.)

RATES IN WORDS

(RUPEES)

139 Providing & constructing of septic tank and soak pit as per IOC

standard drawing including inlet and outlet chambers, heavy duty CI

manhole cover, vent pipe etc. complete. Item includes 150mm dia.PVC

pipe (6 kg/cm2) between soak pit and septic tank, excavation, PCC,

brickwork, plastering all other civil works as per drawing etc. complete

272 a) For 50 users LS 94,065 Ninety Four Thousand

and Sixty Five only273 b) For 20 users LS 60,563 Sixty Thousand Five

Hundred and Sixty Three

only140 Supplying and installing of H. D. moulded polyethylene tank, "SINTEX"

or equivalent approved make water storage tank of following capacities

including all fittings like drain plug etc., placing on plain hard surface,

etc. com lete274 a) 500 Litres EACH 2,682 Two Thousand Six

Hundred and Eighty Two

only275 b) 1000 Litres. EACH 5,363 Five Thousand Three

Hundred and Six Three

onl276 c) 2000 Litres. EACH 10,726 Ten Thousand Seven

Hundred and Twenty Six

only141 Providing and fixing stainless steel jali (grating) with or without hole for

waste pipe for floor/Nahini trap277 a) 75mm dia - Weight not less than 70 grams EACH 39 Thirty Nine only

278 b) 100 mm dia - Weight not less than 100 grams EACH 69 Sixty Nine only

142 Providing and fixing plastic moulded jali of required colour and shade

for floor/Nahini trap279 a) Circular type EACH 34 Thirty Four only

280 b) Rectangular with openable circular - lid EACH 39 Thirty Nine only

143 Providing & fixing Brass/GM full way gate valve with CI wheel screwed

ends of IS approved quality.281 a) 15mm dia EACH 477 Four Hundred and

Seventy Seven only

282 b) 20mm dia EACH 640 Six Hundred and Fortyonly

283 c) 25mm dia EACH 995 Nine Hundred and Ninety

Five only284 d) 32mm dia EACH 1,390 One Thousand Three

Hundred and Ninety only

285 e) 40mm dia EACH 1,875 One Thousand Eight

Hundred and Seventy

Five only144 Providing and filling rain water harvesting pits stone aggregates/ ballast

in specified sizes cost and conveyance of all materials, labour charges,

sundries etc. com lete286 a) 40 mm stone aggregates CUM 700 Seven Hundred only

145 WATER SUPPLY, PLUMBING AND SANITARY WORKS FOR PCF

AND SPECIALISED WORKS287 a) Providing & fixing first quality white vitreous china wall hung European

type WC pan (Parryware Cascade or equivalent) with seat cover with all

fittings and fitting with chair brackets / heavy rag bolts with rubber bush

and stainless steel cap, after drilling holes of 20 mm dia and inserting

suitable sleeves etc. complete as per detailed specifications.

EACH 4,391 Four Thousand Three


only

288 b) Providing & fixing first quality coloured vitreous china wall hung

European type WC pan (Parryware Cascade or equivalent) with seat

cover with all fittings and fitting with chair brackets / heavy rag bolts

with rubber bush and stainless steel cap, after drilling holes of 20 mm

dia and inserting suitable sleeves etc. complete as per detailed

s ecifications.

EACH 5,686 Five Thousand Six

Hundred and Eighty Six

only

289 c) Providing & fixing first qualitywhite vitreous china Anglo Indian typeWC

pan with seat cover with all fittings as per detailed specifications.

EACH 3,322 Three Thousand Three

Hundred and Twenty

Two only

290 d) Providing & f ixing f irst quality white vitreous china Urinal basin 420 x610 with built in Automatic Flushing Sensor- parrryware with all fittings

as er detailed s ecifications.

EACH 11,569 Eleven Thousand FiveHundred and Sixty Nine

onl




21/63

ITEM

CODESl.

No.


(Rs.)

RATES IN WORDS

(RUPEES)

291 e) Providing and fixing at site circular shaped 470 mm dia Off White

coloured wash basin of Hindware/ Parryware make to be fixed in the

Black Granite stone supported on 20 mm thk Kadappah stone slab,

including cutt ing of Necessary hole in the granite stone, CP waste

coupling, nickel plated copper connections, Bottle trap of jaquar make

(catalogue no. 769. - B) / ESS - ESS (cromaseries) / AQUEL makeetccomplete with waste coupling JACQUAR make Catelogue No. 705, but

excluding cost of Tap, angle cocks etc complete. (The wash basin shall

be under counter type. Granite slab, cuddapah stone slab etc. will be

paid for separately.) (No extra payment will be made for cutting opening

in granite slab).

EACH 3,677 Three Thousand Six

Hundred and Seventy

Seven only

292 f) Providing and f ixing at site Jacquar make Pillar cock long neck with

aerator (contnental series) Catalogue No. 021 / ESS-ESS (croma

series) / AQUEL(deleno) make or equivalent make approved by IOCL

be fixed at site including all necessary fittings etc complete.

EACH 787 Senven Hundred and

Eighty Seven only

293 g) Providing & Fixing at site angle cock of Jacquar make ( Continental

Series) Catalogue No.053 / ESS-ESS (croma series) / AQUEL (deleno)

make or equivalent make approved by IOCL, to be fixed below wash

basins and other areas etc complete.

EACH 584 Five Hundred and Eighty

Four only

294 h) Providing and fixing at site Jacquar make Stop cock (Continental

Series) Catalogue No.083 / ESS-ESS (croma series) / AQUEL make orequivalent make approved by IOCL as required.

EACH 950 Nine Hundred and Fifty

only

295 i) Providing and fixing at site bib cock jacquar make (Continental Series)

Catalogue NO.107 / ESS-ESS (croma series) / AQUEL(deleno) make

or equivalent make approved by IOCL to be fixed at stte including all

materials, labour etc complete.

EACH 810 Eight Hundred and Ten

only

296 j) Providing and Fixing Metropole concelled Flush Valve Brass Chrome

finished Plumbing Fitt ings: Make: Jacquar (Continental Series)

Catalogue No.1081A, Ess Ess (Chroma Series), Aquel (deleno), or

equivalent make approved by IOCL.

EACH 1,916 One Thousand Nine

Hundred and Sixteen

only

297 k) Providing & fixing SS / finish Toilet Paper Holder - Jaguar (continental) /

aquel (deleno) or equivalent make approved by IOCL.

EACH 687 Six Hundred and Eighty

Seven only

298 l) Providing & fixing SS / finish rob hook - Jaguar (continental) / aquel

(deleno) or equivalent make approved by IOCL.

EACH 519 Five Hundred and

Nineteen only299 m) Providing & f ixing Liquid Soap Dispenser Colgate Pamolive make or

Eqiuivalent approved by IOCL.

EACH 292 Two Hundred and Ninety

Two only300 n) Providing & f ixing Electrically Operated Hand Drver System on wall

near Wash Basin area of make Technocrat or Equivalent approved by

IOCL.

EACH 6,581 Six Thousand FiveHundred and Eighty One

onlyXXIII PAINTING

301 146 Providing & painting with two coats of cement paint of approved brand

and manufacture on new plastered surface over two coats of white

cement after preparing the surface including necessary scrapping,

cleanin scaffoldin curin etc. com lete.

SQM 48 Forty Eight only

302 147 Providing & painting with two coats cement paint of approved brand and

manufacture on old wall surface after necessary washing, cleaning,

curin etc. com lete

SQM 35 Thirty Five only

303 148 Providing & painting with acrylic distemper two coats on new surfaces

over one coat of cement primer with 2 coats of putty etc. including

necessary scraping, cleaning, scaffolding etc., complete

SQM 87 Eighty Seven only

304 149 Providing & painting one coat Acrylic distemper for the old surfaces

after scrapping and cleaning the existing surface as directed by IOCLincludin scaffoldin etc. com lete.

SQM 16 Sixteen only

305 150 Providing & painting two coats Acrylic distemper for the old surfaces

after scrapping and cleaning the existing surface as directed by IOCL

including scaffolding etc. complete.

SQM 26 Twenty Six only

306 151 Surface preparation, supplying & painting one coat of cement primer

and two coats of wall putty and two coats of interior acrylic emulsion

paint for interior surfaces, as per specifications, and of approved colour

and make, including scraping, scaffolding etc. complete.

SQM 110 One Hundred and ten

only

307 152 Surface preparation, supplying & painting one coat of interior acrylic

emulsion paint for interior surfaces as per specif ications, and of

approved colour and make including scraping & scaffolding etc.

complete.

SQM 31 Thirty One only

308 153 Surface preparation,supplying & painting two coats of interior acrylic

emulsion paint for interior surfaces as per specif ications, and of

approved colour and make including scraping, scaf folding etc.complete.

SQM 48 Forty Eight only




22/63

ITEM

CODESl.

No.


(Rs.)

RATES IN WORDS

(RUPEES)

309 154 Surface preparation, supplying & painting one coat of exterior acrylic

emulsion paint for exterior surfaces as per specif ications and of

approved colour and make including scraping, scaf folding etc.

complete.

SQM 39 Thirty Nine only

310 155 Surface preparation, supplying & painting two coat of exterior acrylic

emulsion paint for exterior surfaces as per specif ications and ofapproved colour and make including scraping, scaf folding etc.

complete.


311 156 Surface preparation, supplying & painting two coat of exterior acrylic

emulsion paint over one coat of cement primer for exterior surfaces as

per specifications and of approved colour and make including scraping,

scaffolding etc. complete.

SQM 82 Eighty Two only

312 157 Providing and applying priming coat using two coats of white cement

after scrapping and cleaning the surface, using scaffolding, etc.

complete.

SQM 13 Thirteen only

313 158 Providing painting with two coats of synthetic enamel paint over one

coat of cement primer on new plastered surfaces including cost of all

materials, labour, scraping, scaffolding etc., complete.

SQM 58 Fifty Eight only

314 159 Providing painting with one coat of synthetic enamel paint on existing

cement plastered and painted surfaces including cost of all materials,labour, scraping, scaffolding etc., complete.

SQM 25 Twenty Five only

315 160 Providing painting with two coats of synthetic enamel paint on existing

cement plastered and painted surfaces including cost of all materials,

labour, scraping, scaffolding etc., complete

SQM 39 Thirty Nine only

316 161 Providing painting two coats synthetic enamel paint over two coats of

zinc phosphate primer on new steel work including cost of all material,

labour, scraping, scaffolding, etc. complete


317 162 Providing painting one coat synthetic enamel paint over one coat of zinc

phosphate primer for old steel surfaces after scrapping and cleaning the

existing surface as directed by IOCL including scaffolding etc.complete

SQM 38 Thirty Eight only

318 163 Providing painting two coats synthetic enamel paint over one coat of

zinc phosphate primer for the old steel surfaces after scrapping and

cleaning the existing surface as directed by IOCL including scaffolding

etc. complete.

SQM 51 Fifty One only

319 164 Providing & painting with two coats of aluminum paint for steel surface

over two coats of zinc phosphate primer after cleaning the old paint, mill

scale, rust, grease, etc. including scraping, scaffolding etc. complete.

SQM 59 Fifty Nine only

320 165 Providing & painting with two coats of aluminum paint for steel surface

over one coat of zinc phosphate primer after cleaning the old paint, mill

scale, rust, grease, etc. including scraping, scaffolding etc. complete.

SQM 47 Forty Seven only

321 166 Surface preparation, providing and applying spray painting with one coat

of metal primer (1litre/10m2), two coats of metal putty (1kg/5m2), one

coat speedkote primer surfacer (1litre/10m2),and two coats of synthetic

enamel paint (1litre/5m2) for canopy / building facia made of MS/Al.

sheet including cost of all machineries, materials, labour, scaffolding

etc., as per specifications and IOC colour scheme.

SQM 232 Two Hundred and Thirty

Two only

322 167 Surface preparation, providing and applying spray painting, two coats ofsynthetic enamel paint (1litre/5m2) for existing canopy / building facia

made of MS/Al. sheet including cost of all machineries, materials,

labour, scaffolding etc., as per specifications and IOC colour scheme.

SQM 121 One Hundred andTwenty One only

323 168 Surface preparation, providing and applying (spray painting), two coats

of polyurethene paint of approved make on MS canopy columns over

necessary coats of ETCH primer, epoxy putty, primer surfacer, etc. as

per manufacturers specifications, including cost of all machineries,

materials, labour, scaffolding etc. as per directions of IOCL.

SQM 432 Four Hundred and Thirty

Two only

324 169 Supplying and applying white lime wash three coats to give an even

shade including mixing specified quantity of gum and indigo to walls,

ceiling etc. (last two coats with brush only), including cost & conveyance

of all materials, labour etc. complete.

SQM 8 Eight only




23/63

ITEM

CODESl.

No.


(Rs.)

RATES IN WORDS

(RUPEES)

170 Writing name of Retail Outlet and location/Indian Oil Corporation

monogram, other sign / slogans on building / glass of show window etc.

of the following heights / diameters with vinyl sticker LG or 3M make of

a roved ualit and shade.325 a) Letter of size upto 5 cms EACH 25 Twenty Five only

326 b) Letter of size above 5 cms & upto 15 cms EACH 40 Forty only327 c) Letter of size above 15 cms & upto 25 cms EACH 160 One Hundred and Sixty

only328 d) Letter of size above 25 cms & upto 70 cms EACH 320 Three Hundred and

Twenty only329 e) Indian Oil Corporation Monogram upto 45 cm dia. EACH 450 Four Hundred and Fifty

only330 171 Lettering NO SMOKING, AIR, WATER, TOILET, FIRST AID, etc.

(Local language / English), as per drawings and as directed by IOCL.

(Measurement will be for each word / set)

EACH 175 One Hundred and

Seventy Five only

172 Painting the following with two coat

Iocl Proce Bid

Documents

Transcript of Iocl Proce Bid