Post on 06-May-2023
Issue 10-2006 (RI, RII) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6030 Series Premium Tractors-1
ATTACHMENTS - FACTORY AND FIELD INSTALLEDA short description and recommendation of some ofthe various factory and field installations is given.Please note that the information, codes bundlenumbers are given for reference only, the currentprice list must be the only official orderingdocument.
Where factory installation codes or field installationbundle numbers were not available, they will be madeavailable as soon as possible.
1 Drive System
1.1 FRONT PTODirection of rotation of front PTO is seen in relation tothe tractor’s direction of forward travel.A front PTO and a drive shaft must always be orderedin conjuntions with each other.
Front PTO - 21 splines
Models: 6230 - 6630
Models: 6830, 6930, 7430, 7530
Code Bundle Description
8778 AL174158Front PTO, 21 splines (counterclockwise rotating)2300 rpm rated engine speed
Code Bundle Description
8778 AL174161Front PTO, 21 splines (counterclockwise rotating)2100 rpm rated engine speed
6030 Series Premium Tractors-2 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 10-2006 (RI, RII)
Front PTO - 6 splines
Models: 6230 - 6630
Models: 6830, 6930, 7430, 7530
Front PTO drive shaft
Models: 6230 - 6430
Models: 6530 - 6930, 7430, 7530
1.2 CREEPER KITS
Models: with cab: 6230 - 6630Note: Depending on the options of the tractor,
additional spare parts may be required.
Code Bundle Description
8777 AL174160Front PTO, 6 splines(clockwise rotating)2300 rpm rated engine speed
Code Bundle Description
8777 AL174162Front PTO, 6 splines(clockwise rotating)2100 rpm rated engine speed
Code Bundle DescriptionAL174164 Front PTO drive shaft (4 cyl.)
Code Bundle DescriptionAL174165 Front PTO drive shaft (6 cyl.)
Code Bundle Description
AL173288Creeper kit, PowrQuad Plus or AutoQuad Plus transmission,40 km/h (25 mph), 6 ranges
Bundle Description Remark QTY
AL160792 Creeper housingwith dowel pins 1
AL173654Field installation kitwith cab componentsfor creeper lever
1
Issue 10-2006 (RI, RII) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6030 Series Premium Tractors-3
Models: with cab: 6230 - 6630Note:Depending on the options of the tractor,
additional spare parts may be required.
Models: with cab: 6230 - 6430Note:Depending on the options of the tractor,
additional spare parts may be required.
AL172602 Suction line 1AL168627 U-joint, drive shaft 1
L168349 Shape hose(coolant inlet) 1
L168350 Shape hose(coolant return) 1
Code Bundle Description
AL173290Creeper kit, PowrQuad Plus transmission, 40 km/h (25 mph) ECO or AutoQuad Plus transmission,50 km/h (31 mph), 6 ranges
Bundle Description Remark QTY
AL160792 Creeper housingwith dowel pins 1
AL173654Field installation kitwith cab componentsfor creeper lever
1
AL172602 Suction line 1AL168627 U-joint, drive shaft 1
L168349 Shape hose(coolant inlet) 1
L168350 Shape hose(coolant return) 1
Bundle Description Remark QTY
Code Bundle Description
AL173291Creeper kit, PowrQuad Plus transmission, 40 km/h (25 mph),4 ranges
Bundle Description Remark QTY
AL173654Field installation kitwith cab componentsfor creeper lever
1
AL172602 Suction line 1AL168627 U-joint, drive shaft
AL155069 Oil line assembly for tractors with2-wheel drive 1
AL155071 Oil line assembly for tractors with4-wheel drive 1
L168349 Shape hose(coolant inlet) 1
L168350 Shape hose(coolant return) 1
6030 Series Premium Tractors-4 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 10-2006 (RI, RII)
Models: with cab: 6830Note:Depending on the options of the tractor,
additional spare parts may be required.
Models: with cab: 6930Note:Depending on the options of the tractor,
additional spare parts may be required.
Models: with cab: 6230 - 6930
Code Bundle Description
AL173422
Creeper kit,PowrQuad Plus transmission, 40 km/h (25 mph) orAutoQuad Plus transmission,40 km/h (25 mph) or 50 km/h (31 mph)
Bundle Description Remark QTY
AL173654Field installation kitwith cab componentsfor creeper lever
1
RE201075 Transmission outputshaft with bushing 1
L64500 Loctite 574 1
Code Bundle Description
AL173423
Creeper kit,PowrQuad Plus transmission, 40 km/h (25 mph) orAutoQuad Plus transmission,40 km/h (25 mph) or 50 km/h (31 mph)
Bundle Description Remark QTY
AL173654Field installation kitwith cab componentsfor creeper lever
1
RE201075 Transmission outputshaft with bushing 1
L64500 Loctite 574 1
Code Bundle Description
AL173654 Field installation kit with cab components for creeper lever
Issue 10-2006 (RI, RII) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6030 Series Premium Tractors-5
2 HYDRAULICS
2.1 MECHANICALLY-ACTUATED SELECTIVE CONTROL VALVES -
M-SCV
The M-SCVs provide a full range of features whichgives the flexibility to operate all hydraulic equipmenton the farm. The M-SCVs are located at the rear of thetractor. The selective control valves may be used inany of the available positions.Three different M-SCV versions are available: 100 Series, 200 Series or 300 Series. These M-SCVscan only be used with PFC hydraulic system withaxial piston pump.The M-SCV field kit contains as well thecorresponding quick couplers. The below listedactuating parts have to be ordered separately accordingto the mounting position of the M-SCV and this partsinclude the new color-coded dust protection housings.
100 Series M-SCV
Models: 6230 - 6930, 7430, 7530Note:This selective control valve at position 3 or 4
may be operated by a separat control lever or by a multi-function lever.
Actuating partsFor M-SCV installation on Position III
For M-SCV installation on Position IV
200 Series M-SCV
Models: 6230 - 6930, 7430, 7530Note:This selective control valve at position 3 or 4
may be operated by a separat control lever or by a multi-function lever.
Actuating partsFor M-SCV installation on Position III
Code Bundle Description
7221 AL170399 M-SCV Series 100 withstandard quick couplers
Bundle Description Remark QTY
AL176243Control parts andcolor-coded dust protectionhousing in brown
controls SCV at position III 1
AL176245
Multi-function lever with 2 functions and HI-LO shifting and color-coded dust protection housing inbrown and black
controls SCV at position III and IV
1
Bundle Description Remark QTY
AL176244Control parts andcolor-coded dust protectionhousing in black
controls SCV at position IV 1
AL176245
Multi-function lever with 2 functions and HI-LO shifting and color-coded dust protection housing inbrown and black
controls SCV at position III and IV
1
Code Bundle Description
7230 AL170400 M-SCV Series 200 withDeLuxe quick couplers
Bundle Description Remark QTY
AL176243Control parts andcolor-coded dust protectionhousing in brown
controls SCV at position III 1
AL176245
Multi-function lever with 2 functions and HI-LO shifting and color-coded dust protection housing inbrown and black
controls SCV at position III and IV
1
6030 Series Premium Tractors-6 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 10-2006 (RI, RII)
For M-SCV installation on Position IV
300 Series M-SCV
Models: 6230 - 6930, 7430, 7530Note:This selective control valve at position 3 or 4
may be operated by a separat control lever or by a multi-function lever.
Actuating partsFor M-SCV installation on Position III
For M-SCV installation on Position IV
Bundle Description Remark QTY
AL176244Control parts andcolor-coded dust protectionhousing in black
controls SCV at position IV 1
AL176245
Multi-function lever with 2 functions and HI-LO shifting and color-coded dust protection housing inbrown and black
controls SCV at position III and IV
1
Code Bundle Description
7226 AL170401 M-SCV Series 300 withDeLuxe quick couplers
Bundle Description Remark QTY
AL176243Control parts andcolor-coded dust protectionhousing in brown
controls SCV at position III 1
AL176245
Multi-function lever with 2 functions and HI-LO shifting and color-coded dust protection housing inbrown and black
controls SCV at position III and IV
1
Bundle Description Remark QTY
AL176244Control parts andcolor-coded dust protectionhousing in black
controls SCV at position IV 1
AL176245
Multi-function lever with 2 functions and HI-LO shifting and color-coded dust protection housing inbrown and black
controls SCV at position III and IV
1
Issue 10-2006 (RI, RII) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6030 Series Premium Tractors-7
2.2 M-ICV AND E-ICV
Mechanical IndependentControl Valve (M-ICV)
Models: 6230 - 6930, 7430, 7530Note:Depending on the options of the tractor,
additional spare parts may be required.
Models: 6230 - 6930, 7430, 7530Note:Depending on the options of the tractor,
additional spare parts may be required.
Electrical IndependentControl Valve (E-ICV)
Models: 6230 - 6930, 7430, 7530Note:Depending on the options of the tractor,
additional spare parts may be required.
Code Bundle Description8810 AL174931 M-ICV field kit (2 functions)
Bundle Description Remark QTYAL174935 ICV lines 6230 - 6630 1AL174937 ICV lines 6830, 6930 1AL174938 ICV lines 7430, 7530 1
AL175020 Joystick for M-ICV control(2 functions) 6230 - 6930 1
AL175021 Joystick for M-ICV control(2 functions) 7430, 7530 1
AL175022Joystick for M-ICV control with diverter switchesand HI-LO shifting(2 functions)
6230 - 6930 1
AL175023Joystick for M-ICV control with diverter switchesand HI-LO shifting(2 functions)
7430, 7530 1
Code Bundle DescriptionAL174932 M-ICV field kit (3 functions)
Bundle Description Remark QTYAL174935 ICV lines 6230 - 6630 1AL174937 ICV lines 6830, 6930 1AL174938 ICV lines 7430, 7530 1
AL175024Joystick for M-ICV control with diverter switchesand HI-LO shifting(3 functions)
6230 - 6930 1
AL175025Joystick for M-ICV control with diverter switchesand HI-LO shifting(3 functions)
7430, 7530 1
Code Bundle Description8802 AL174933 E-ICV field kit (2 functions)
Bundle Description Remark QTYAL174935 ICV lines 6230 - 6630 1AL174937 ICV lines 6830, 6930 1AL174938 ICV lines 7430, 7530 1
AL175230 Electrical parts for tractors with M-SCV 1
AL175231 Electrical parts for tractors with E-SCV 1
AL174410 Joystick for E-ICV with CommandArm 1
AL174227 Joystick for E-ICV without CommandArm 1
6030 Series Premium Tractors-8 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 10-2006 (RI, RII)
Models: 6230 - 6930, 7430, 7530Note:Depending on the options of the tractor,
additional spare parts may be required.
2.3 ELECTRICALLY-ACTUATED SELECTIVE CONTROL VALVE -
(E-SCV)
Models: 6230 - 6930, 7430, 7530
Models: 6230 - 6930, 7430, 7530
Code Bundle Description8803 AL174934 E-ICV field kit (3 functions)
Bundle Description Remark QTYAL174935 ICV lines 6230 - 6630 1AL174937 ICV lines 6830, 6930 1AL174938 ICV lines 7430, 7530 1
AL175230 Electrical parts for tractors with M-SCV 1
AL175231 Electrical parts for tractors with E-SCV 1
AL174410 Joystick for E-ICV with CommandArm 1
AL174227 Joystick for E-ICV without CommandArm 1
Code Bundle Description
7231 AL176291Kit of parts for E-SCV’sat position III includes valvesand control parts
Code Bundle Description
7231 AL176145Kit of parts for E-SCV’sat position IV includes valvesand control parts
Issue 10-2006 (RI, RII) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6030 Series Premium Tractors-9
2.4 MISCELLANEOUS
Additional hydraulic oil reservoir 14 litresMore and more applications require the use ofhydraulic components. Big trailers with telescopiccylinders, for example, easily require 30 litres or moreof hydraulic oil to dump the trailer’s platform.To increase the amount of hydraulic oil at yourdisposal for such applications, John Deere offers anadditional hydraulic oil reservoir for easy fieldinstallation on 6030 Series Premium tractors. Thesereservoir provide additional 14 litres of hydraulic oil toincrease the withdrawal capacity of your hydraulicsystem.
Models: 6230 - 6630
Models: 6830, 6930, 7430, 7530
Code Bundle Description
8897 AL172591 Additional hydraulic oil reservoir,14 litres
Code Bundle Description
8897 AL172593 Additional hydraulic oil reservoir,14 litres
6030 Series Premium Tractors-10 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 10-2006 (RI, RII)
3 ENGINE
Bottom guard for fuel tanksRecommended in adverse conditions, like scrub,woodland or land reclamation.
Models: 6230 - 6430
Models: 6530 - 6830
Models: 6530 - 6930
Models: 6930
Code Bundle Description
8875 AL156243 Base guard for fuel tank (160 l, 165 l, 185 l)
Code Bundle DescriptionAL118241 Base guard for fuel tank, 207 l
Code Bundle DescriptionAL159939 Base guard for fuel tank, 250 l
Code Bundle DescriptionAL163513 Base guard for fuel tank, 325 l
Issue 10-2006 (RI, RII) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6030 Series Premium Tractors-11
Always be prepared in winter time -with John Deere heating systems!Have you also struggled with this situation? It iswinter, it is cold and you need your tractor urgently!And then… starting problems! You can save yourself from this situation! Here is thesolution John Deere offers you: a genuine fuel pre-heater, cold start packages and a coolant pre-heater -for reliable starts during the cold season!
Fuel pre-heaterParticularly important in the cold season, fuel pre-heaters prevent fuel waxing and subsequent filterblockage by automatically actuating a heater elementin the filter at low temperatures.
Models: 6230 - 6930, 7430, 7530
Cold start packagesWith a cold start package your tractor is fully preparedfor cold weather conditions. All required mountingparts are included in the field installation kit.
Models: 6230 - 6930, 7430, 7530Note:not for tractors with AutoPowr transmissionNote: if the tractor is not already equipped with a
coolant pre-heater please order in addition 1 x AL173954 coolant pre-heater, 230 V
Models: 6330 - 6930, 7430, 7530Note: for tractors with AutoPowr transmissionNote: if the tractor is not already equipped with a
coolant pre-heater please order in addition 1 x AL173954 coolant pre-heater, 230 V
Coolant pre-heaterA cold start - defined as a start with an enginetemperature lower than 10°C - places stress on theengine. Due to the quick and unbalanced heating of theengine, parts wear out more rapidly. With the help of acoolant heater the engine block is warmed andtherefore provides an easier start and reduces wear. Furthermore, it is important that the engine reaches it’soptimum operating temperature as fast as possible.This reduces fuel consumption and reduces exhaustemissions. Result: lower operating costs and lessenvironmental pollution.
Models: 6230 - 6930, 7430, 7530
Code Bundle Description9025 AL158520 Fuel pre-heater
Code Bundle Description
9020 AL173953Cold start package, 230 V(charge pump pre-heater and transmission pre-heater)
Code Bundle Description
9020 AL173952 Cold start package, 230 V(charge pump pre-heater)
Code Bundle Description9030 AL173954 Coolant pre-heater, 230 V
6030 Series Premium Tractors-12 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 10-2006 (RI, RII)
4 ELECTRICAL - ELECTRONICAL COMPONENTS
4.1 LIGHTS
Headlights H4, beltline-mountedThese adjustable head lamps are fitted left and right tothe beltline of the cab. The halogen-type H4 bulbsprovide excellent illumination to the front and arestrongly recommended if front mounted equipment isto be used, especially e.g. for highway use when aloader or front linkage mounted implements obscurethe beam of the normal head lamps.
Models: 6230 - 6930, 7430, 7530
Models: 6230 - 6930, 7430, 7530
Working Lights H3, beltline-mountedThese adjustable working lights are fitted left and rightto beltline of the cab and offer outstandingillumination to the front working area as well as formounted implements (could be installed upright orhanging).
Models: 6230 - 6930, 7430, 7530Note: can also be installed on rear fender
(see corresponding catalog page)
Code Bundle Description
9070 AL174332 2 beltline-mounted headlights H4, for right hand traffic
Code Bundle Description
9070 AL174344 2 beltline-mounted headlights H4, for left hand traffic
Code Bundle Description
9071 AL1743412 Working Lights H3,beltline-mounted on cab frame(upright or hanging)
Issue 10-2006 (RI, RII) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6030 Series Premium Tractors-13
Xenon Working Lights, beltline-mounted
Models: 6230 - 6930, 7430, 7530
Front Corner Working Lights H3
Sideways integrated in the front grille next to the frontheadlights, may be switched off for road travel.Provide superior illumination of the front working areaas the corner work lights are directed downward andoutward to light up the area immediately inside andahead of the front wheels. This will help operatorsfollowing a plough furrow or drill marker furrow atnight - for better working conditions and increasedproductivity.
Models: 6230 - 6930, 7430, 7530Note:Depending on the options of the tractor,
additional spare parts may be required.
Code Bundle Description
9072 AL175583 2 Xenon (HID) Working Lights,beltline-mounted on cab frame
Code Bundle DescriptionAL175575 Front Corner Working Lights H3
Bundle Description Remark QTYAL171958 Wiring harness, hood for 4 cyl. tractors only 1AL171893 Wiring harness, hood for 6 cyl. tractors only 1AL114046 Rocker switch 1
6030 Series Premium Tractors-14 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 10-2006 (RI, RII)
Additional Working Lights H3,cab-roof mounted
Models: 6230 - 6930, 7430, 7530
Xenon Working Lights,cab-roof mounted rear
Xenon headlights are firmly established within theautomobile industry, for giving the driver increasedvisibility. Xenon lights offer more advantages when used in thefield and John Deere gives the operator the opportunityto use them to their fullest potential.
Models: 6230 - 6930, 7430, 7530Note: please order in addition L153232 double-faced
adhesive tape if required
Code Bundle Description
AL1743452 additional Working Lights H3,cab-roof mounted,FRONT and/or REAR
Code Bundle Description
AL174229 2 Xenon (HID) Working Lights,cab-roof mounted rear
Issue 10-2006 (RI, RII) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6030 Series Premium Tractors-15
Working Light H3,fender-mounted rear
Models: 6230 - 6930, 7430, 7530
Models: 6230 - 6930, 7430, 7530Note:can also be installed on beltline
(see corresponding catalog page)
Beacon light
Models: 6230 - 6930, 7430, 7530
Code Bundle Description
AL174329 1 Working Lightfender-mounted rear
Code Bundle Description
AL1743412 Working Lightsfender-mounted rear(without licence plate)
Code Bundle Description9080 AL174214 Field installation kit for beacon light
6030 Series Premium Tractors-16 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 10-2006 (RI, RII)
4.2 MISCELLANEOUS
Multiple power outlet socketJohn Deere offers an auxiliary power strip kit to hookup electrical accessories to the tractor. It allows you toexpand your outlet needs while providing quick andconvenient hookup. The installation is flexible andeasy.Six additional electrical outlets give either permanentor ignition key controlled power for such items as:Computers, portable telephone charges, implementmonitor.
Models: 6230 - 6930, 7430, 7530
Powerstrip AdaptersPowerstrip adapters allow electrical connection formonitors and equipment not fitting the tractor’sstandard powerstrip or 3-pin outlets. Availableadapters include:
• 1 m (39.37 inch) cable for custom hard-wiring tocomponents
• Cigarette lighter-style outlet• North American-style flat 3-pin adapter (replicates
3-pin outlet found on Command Console)• European-style round 3-pin adapter
Powerstrip adapters can also be used with the FieldOffice.
Models: 6230 - 6930, 7430, 7530
Models: 6230 - 6930, 7430, 7530
Models: 6230 - 6930, 7430, 7530
Models: 6230 - 6930, 7430, 7530
Code Bundle Description
9146 AL174215 Field installation kit formultiple power outlet socket
Code Bundle Description
RE67013Adapter standard connector(with 1 m / 39.37 inch cable for hard-wiring electrical components)
Code Bundle DescriptionRE67014 Adapter cigarette lighter outlet
Code Bundle DescriptionRE67015 Adapter 3-pin North American
Code Bundle DescriptionRE67016 Adapter 3-pin European
Issue 10-2006 (RI, RII) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6030 Series Premium Tractors-17
Sockets on the right rear cab post(C-Post)1) The 3-pin socket provides 12V with up to 30 amp.2) The 7-pin signal interface socket allows
implementsto communicate with the tractor withinthe ISO standard 11786 (please order in additionAL174997).
3) In case of electro-hydraulic pick-up hitchapplication the control switch can be locatedinto this socket as well.
Models: 6230 - 6930, 7430, 7530
Signal interface socket
Models: 6230 - 6930, 7430, 7530Note:can be added to 3-terminal socket AL174348
Battery cut-off switch
Models: 6230 - 6430
Models: 6530 - 6930, 7430, 7530Code Bundle Description9145 AL174348 3-terminal socket
Code Bundle DescriptionAL174997 Signal interface socket
Code Bundle Description9015 AL174696 Battery cut-off switch (4 cyl.)
Code Bundle Description9015 AL174697 Battery cut-off switch (6 cyl.)
6030 Series Premium Tractors-18 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 10-2006 (RI, RII)
Back-up alarm
Models: 6230 - 6930, 7430
HMS IIThe second generation of HMS can reduce thenumber of manual tasks you perform by up to 80%. Itcan help gain you time in the field and ensure yourheadland operations are as precise at the end of the dayas they were when your started your work. Forexample, with one push of a switch, you can raise thehitch, adjust a hydraulically driven implement, shut offthe PTO, disengage the MFWD and turn off thedifferential lock. All this is done in the sequence youset and the system can repeat the manoeuvresaccording to a programmed distance. Touch the buttonagain to return to the previous setting - field work hasnever been that easy or productive!
Models: 6230 - 6930, 7430, 7530Note: Depending on the options of the tractor,
additional spare parts may be required.
AutoQuad PlusIt offers all the features of PowrQuad Plus with theadditional benefits of automatic shifting, infinitelyadjustable shift point, forward/reverse ratio setting anda programmable maximum gear. The advancedelectronic control unit (ECU) measures engine loadand rpm to shift up or down automatically among thefour powershiftable speeds within each range.
Models: 6230 - 6930, 7430, 7530
Code Bundle DescriptionAL174225 Field installation kit for back-up alarm
Code Bundle Description9125 AL176254 Field installation kit for HMS II
Bundle Description Remark QTY
AL176163 Linear hitch controlfor RH console 1
RE223554 Rocker switch, HMS II 1
Code Bundle DescriptionAL176040 Field installation kit for AutoQuad Plus
Issue 10-2006 (RI, RII) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6030 Series Premium Tractors-19
5 MISCELLANEOUS
5.1 OPERATOR´S STATION
New Cab AccessoriesJohn Deere offers new accessories for the highest inoperator comfort and convenience! Personalize yourtractor cab and underline the high-quality appearanceof your tractor with the following new accessories.
Leather cusions with seat heatingThe dark brown leather seat cushion kit includes seatand backrest cushions as well as a backrest extension.The new leather trims provide the ultimate in operatorcomfort; especially the extra thick seat cushion and thebackrest extension help to reduce operator fatigue formore productivity even on long working days. Inaddition, the integrated seat heating provides optimumcomfort on cold winter days.As an additional eye-catcher the name John Deere isembroidered on the backrest extension. The robust and longevity leather is easy to clean andabrasion-proof.
Models: 6230 - 6930, 7430, 7530Note:Leather seat cushion is only compatible with
MSG95 seats with adjustable seat cushion inclination and seat pan depth adjustment (see picture below).
Note:For seats without seat heating please order in addition AL151005 wiring harness.
Leather steering wheelThe new dark-brown leather steering wheel is elegantin appearance and provides a comfortable grip evenduring long working days! It is produced in the high-standard John Deere qualityand features the same adjustability as the standardsteering wheel.
Models: 6230 - 6930, 7430, 7530
Stainless steel heat protectionfor exhaust pipeFor an individual and elegant look John Deere offersthe new stainless steel heat protection for the exhaustpipe.
It is produced in the high-standard John Deere qualitywhich ensures durability and a long service life.
Code Bundle Description
AL174350Dark brown leather cushions and backrest with preparation for seat heating for MSG95 seats
Code Bundle DescriptionAL173828 Dark brown leather steering wheel
6030 Series Premium Tractors-20 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 10-2006 (RI, RII)
Models: 6530 - 6930, 7430, 7530
Wood-look trimsPersonalize your tractor cab with the new wood-looktrims. The kit includes decorative covers for the radioconsole as well as the rear and front part of theheadlining - one with preparation for sunshade. The new interior parts are easy to install and give yourJohn Deere tractor an elegant and extraordinary look!
Models: 6230 - 6930, 7430, 7530
Code Bundle Description
AL175376 Stainless steel heat protection for exhaust pipe
Code Bundle DescriptionAL176910 Wood-look trims
Issue 10-2006 (RI, RII) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6030 Series Premium Tractors-21
Super Air Comfort seat - MSG 95
Air suspended seat features:• Air suspension with low frequency technology is
specially designed for tractors with axle and cabsuspension. Absorbs jolts and vibrations andreduces unpleasant shocks to spinal column.Makes driving a calm, relaxed experience,especially at higher speeds.
• Horizontal adjustment 210 mm (8.27 inch) foreasy positioning in the cab.
• 100 mm (3.94 inch) vertical suspension travel toabsorb even the hardest shocks.
• Backrest angle adjustment: Individual backrestinclination supports the drivers back to preventpostural anomaly and reach an optimal seatingposition for a relaxed driving in all time.
• Integrated telescopic backrest extension from 475-645 mm (25.39 inch) for optimum back support.
• Weight adjustment: The adjustment to the correctweight of the driver is very important to assureoptimum functionality of the whole seatsuspension - for greater ergonomics and safety.
• Height adjustment (80 mm / 3.15 inch) for an idealseat position for every body size.
• Pneumatic lumbar support allows a quick andexact adjustment of the lumbar support to preventback problems. This comfort feature feels goodand prevents spinal injuries by ideally supportingthe back. It can quickly and precisely be adjustedto the individual contour of driver’s back.
• Horizontal suspension (45 mm / 1.77 inch) todamp oscillations of implements, trailers at highspeed or in difficult terrain. Minimizes horizontalvibrations when travelling fast, pullingimplements or trailers and when working on roughterrain to prevent harmful shocks from the driver’sback.
• Lateral suspension (+/- 25 mm / 0.98 inch) absorbsvibrations and shocks coming crosswise to thedriving direction to protect the diver’s back,especially the lumbar area for more comfortablesitting even when driving at slopes.
• The seat pan depth adjustment for quickadjustment of seat cushion to de driver’s bodysize. Optimally supports thighs of different length.
• Seat cushion inclination in 4 steps to reliefpressure from the knees.
• An active carbon layer is located under the seatcover removes body moisture and the discomfortof sweating. Features a special pore structurewhich absorbs millions of water molecules - 1cm2/0.16 inch2 of cover material has an innersurface nearly as big as a soccer field! Moreoperator’s comfort through a dry and pleasant seatclimate.
• Seat heating provides pleasant seat comfort evenduring cold days.
• Foldable armrest with height and angleadjustment: Wide and ergonomically contouredarmrests can be individually adjusted. Ensureperfect posture in the seat and relaxed armposition. Important: Armrests that are positionedtoo low promote an asymmetrical posture andarmrests that are positioned too high lead toshoulder or neck pain.
• Operator’s manual holder: always on hand and in atidy appearance.
• Seat switch• Adjustable swivel +/-15° for easy access in and
out of the seat as well as easier control of rearimplements.
• Optional CommandArm
Models: 6230 - 6930, 7430, 7530Note: includes:
- pneumatic lumbar support- seat cushion with heating- activated carbon layer- extra-thick seat cushion (101,6 mm /4 inch)
Note: order in addition seat belt AL117366
Models: 6230 - 6930, 7430, 7530Note: includes:
- pneumatic lumbar support- seat cushion with heating- activated carbon layer- extra-thick seat cushion (101,6 mm /4 inch)
Note: order in addition seat belt AL155363
Code Bundle Description
AL175597Super Air Comfort seat MSG95, air suspended with operatorpresence switch(without CommandArm)
Code Bundle Description
AL175596Super Air Comfort seat MSG95, air suspended with operatorpresence switch(with CommandArm)
6030 Series Premium Tractors-22 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 10-2006 (RI, RII)
Models: 6230 - 6930, 7430, 7530Note: includes:
- mechanical lumbar support- standard seat cushion (76,2 mm / 3 inch)
Note: order in addition seat belt AL117366
Super Comfort seat - MSG85
Mechanical suspended seat features: • Mechanical seat suspension• Horizontal adjustment 210 mm (8.27 inch) for
easy positioning of the seat within the tractor cab• 100 mm (3.94 inch) vertical suspension travel to
absorb even the hardest shocks• Backrest angle adjustment: Individual backrest
inclination supports the drivers back to preventpostural anomaly and reach an optimal seatingposition for a relaxed driving in all time.
• Weight adjustment: The adjustment to the correctweight of the driver is very important to assureoptimum functionality of the whole seatsuspension - for greater ergonomics and safety
• Height adjustment (80 mm / 3.15 inch) for an idealseat position for every body size
• Mechanical lumbar support• Horizontal suspension (45 mm / 1.77 inch) to
damp oscillations of implements, trailers at highspeed or in difficult terrain. Minimizes horizontalvibrations when travelling fast, pullingimplements or trailers and when working on roughterrain to prevent harmful shocks from the driver’sback.
• Foldable armrest• Seat switch
Models: 6230 - 6930, 7430, 7530Note: order in addition seat belt AL117366
Backrest extensionFor customers who require greater upper back supportfor MSG85 and MSG95 seats.
Models: 6230 - 6930, 7430, 7530
External swivelThe seat can be swiveled 180 degrees which allows aneasy operation of rear mounted equipment.
Models: 6230 - 6930, 7430, 7530Note: for Super Comfort seat MSG85 and Super Air
Comfort seats MSG95 without CommandArm
Code Bundle Description
AL175598Super Air Comfort seat MSG95, air suspended with operatorpresence switch(without CommandArm)
Code Bundle Description
7622 AL175599 Super Comfort seat - MSG85, mechanical suspended
Code Bundle DescriptionAL174234 Backrest extension
Code Bundle DescriptionAL119292 External adapter, 180° swivel
Issue 10-2006 (RI, RII) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6030 Series Premium Tractors-23
Instructional seat
Models: 6230 - 6930, 7430, 7530
Suspension for Instructional seat
Models: 6230 - 6930, 7430, 7530
Safety belt for instructional seat
Models: 6230 - 6930, 7430, 7530
Inner rear view mirror
Models: 6230 - 6930, 7430, 7530
Additional inside rear view mirrorThe additional rear view mirror is installed on theright-hand side of the rear window (in direction oftravel). It provides an excellent view on swingingdrawbar and rear-end attachments.
Models: 6230 - 6930, 7430, 7530
Code Bundle Description9230 AL173569 Instructional seat (not suspended)
Code Bundle DescriptionAL173570 Suspension for Instructional seat
Code Bundle Description9235 AL117734 Safety belt for instructional seat
Code Bundle Description9205 AL175679 Inner rear view mirror
Code Bundle Description
AL151224 Additional inside rear view mirror,rear installation
6030 Series Premium Tractors-24 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 10-2006 (RI, RII)
External MirrorsLarge external mirrors provide increased trafficawareness for improved road safety and aid trailerreversing.
Telescopic rear view mirrorsTelescopic mirrors offer manually adjustabletelescopic arms with manually adjustable mirrors. Themirror mounts are offset on the stem to allow forfurther adjustment and better head clearance whenentering the cab.
Models: 6230 - 6930, 7430, 7530
Models: 6230 - 6930, 7430, 7530
Rear windscreen wiperA large rear windscreen wiper, with intermittentswitching, maintain good vision in bad weatherconditions. Micro-switches are used to isolate wipermotor when the windscreen is open.
Models: 6230 - 6930, 7430, 7530
Rear windshield washerThe reservoir for the rear windshield washer isinstalled under the right-hand step. It can be reachedeasily, allows quick refilling.
Models: 6230 - 6930
Code Bundle Description7706 AL80126 Left hand telescopic rear view mirror
Code Bundle Description7706 AL80127 Right hand telescopic rear view mirror
Code Bundle Description9100 AL174219 Rear windscreen wiper
Code Bundle DescriptionAL158767 Rear windshield washer
Issue 10-2006 (RI, RII) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6030 Series Premium Tractors-25
Dual Beam Radar SensorMake sure your wheel slip is optimal - between 8% to12% for tractors with MFWD and 10% to 15% fortractors with two-wheel drive. Monitor your wheel slipaccurately with a dual beam radar sensor - save fuel,avoid soil compaction, increase your tractiveperformance, improve your efficiency.Benefits of NEW dual beam design:
• Assures a powerful and accurate signal - Dualbeam output makes radar less susceptible to hardsurface tall/wavy grass interferences.
• Accuracy is aided by a heavy-gauge mountingbracket and rubber isolators that reduce chancesthat vibration can effect the radio signal.
• Has a fast update rate - when the tractor comes tostop, accelerates or varies speed indicated groundspeed on the tractor display will closely match theactual ground speed.
• Dual beam radar sensors are self-calibrating, nosetup time is needed anymore.
The radar sensor may be installed only on tractorsequipped with a Basic Control Unit (BCU).
Models: 6230 - 6930, 7430, 7530Note:please order in addition AL171547 field
installation kit with mounting parts and L65000 safety decal
Models: 6230 - 6930, 7430, 7530Note:please order in addition AL171547 field
installation kit with mounting parts and L65000 safety decal
Models: 6230 - 6930, 7430, 7530Note:please order in addition AL171547 field
installation kit with mounting parts
Models: 6230 - 6930, 7430, 7530
Field office
The field office for the 6030 Series Premium tractors isa large portfolio pouch where papers, operatormanuals, music cassettes, personal notes andimplements information, or even a laptop computercan be stored.
Code Bundle Description
RE243242 Ground speed radar sensor unitfor Europe only
Code Bundle Description
RE218823 Ground speed radar sensor unitfor UK only
Code Bundle Description
RE243241 Ground speed radar sensor unitfor Australia only
Code Bundle Description
AL171547 Field installation kit with mounting parts for ground speed radar sensor
6030 Series Premium Tractors-26 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 10-2006 (RI, RII)
The entire unit is removable to be carried like a briefcase. Its base is also pre-wired to accommodateelectronic devices like mobile telephones, or laptopcomputers. The lid provides a flat writing surface.
Models: 6230 - 6930, 7430, 7530
Electrical Cooling Compartment - Fridge
Models: 6230 - 6930, 7430, 7530
Beverage coolerSpecifically designed for the operator’s station thebeverage cooler can be securely stored and easilyremoved. Especially on hot days the operator willappreciate the insulating capacity keeping food anddrinks cool.
Models: 6230 - 6930
Sun visor
Fold down sun visor to keep that low level sun out ofthe operator’s eyes, from dawn to dusk.
Models: 6230 - 6930, 7430, 7530
Code Bundle Description
9220 AL174264 Field Office and ElectricalCooling Compartment
Code Bundle Description9217 AL174263 Electrical Cooling Compartment
Code Bundle Description
9215 AL112070 Cool box (incl. fastening straps, bracket and hardware)
Code Bundle DescriptionAL157620 Sun visor installation
Issue 10-2006 (RI, RII) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6030 Series Premium Tractors-27
Sunshade front or rearThe John Deere pull-down sunshade improveoperator’s comfort on sunny days by blocking directlight and reducing glare. In addition, they eliminateheat build-up in the cab. Due to an independentvertical adjustment the shades can be lowered andraised to any desired position - for highest operator’scomfort. This kit can be mounted to the front or rear windowand include all needed hardware for field conversion -for an easy and convenient installation.
Models: 6230 - 6930, 7430, 7530
Bottle holderJohn Deere offers a bottle holder for convenient andsafe storage of bottles in 6030 Series Premium cabs.Rugged plastic provides the accustomed John Deerequality. The bottle holder is installed underneath theoperator’s seat in the corner between the step in thefloor and the console.
Models: 6230 - 6930, 7430, 7530Note: not in combination with
suspended instructional seat
Cup-holder
Models: 6230 - 6930Note: the cup-holder cannot be installed on tractors
equipped with cool box AL112070
Code Bundle DescriptionAL174359 Sunshade front or rear
Code Bundle Description9216 AL156731 Bottle holder, left hand
Code Bundle Description9218 AL163826 Cup-holder on front right post
6030 Series Premium Tractors-28 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 10-2006 (RI, RII)
Floor-mat
Models: 6230 - 6930, 7430, 7530
Multi-function control lever for M-ICV(2 functions)
Models: 6230 - 6930
Models: 7430, 7530
Models: 6230 - 6930
Models: 7430, 7530
Code Bundle DescriptionAL168015 Rear floor-mat
Code Bundle Description
AL175020 Joystick for M-ICV control(2 functions)
Code Bundle Description
AL175021 Joystick for M-ICV control(2 functions)
Code Bundle Description
AL175022Joystick for M-ICV control withdiverter switches and HI-LO shifting(2 functions)
Code Bundle Description
AL175023Joystick for M-ICV control withdiverter switches and HI-LO shifting(2 functions)
Issue 10-2006 (RI, RII) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6030 Series Premium Tractors-29
Multi-function control lever for M-ICV(3 functions)
Models: 6230 - 6930
Models: 7430, 7530
Joysticks for E-ICV control
Models: 6230 - 6930, 7430, 7530
Models: 6230 - 6930, 7430, 7530
Activated Carbon Air FilterThe activated carbon air filter provides extra comfortand protection against most airborne particles for thedriver of a 6030 Series Premium tractor under heavyduty conditions. It is equipped with a synthetic pre-filter, a pleated filter element and an activated carboncell.
Models: 6230 - 6930, 7430, 7530
Code Bundle Description
AL175024Joystick for M-ICV control withdiverter switches and HI-LO shifting(3 functions)
Code Bundle Description
AL175025Joystick for M-ICV control withdiverter switches and HI-LO shifting(3 functions)
Code Bundle Description
AL174410 Joystick for E-ICV withCommandArm
Code Bundle Description
AL174227 Joystick for E-ICV without CommandArm
Code Bundle DescriptionAL158986 Activated Carbon Air Filter
6030 Series Premium Tractors-30 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 10-2006 (RI, RII)
5.2 WEIGHTSPlease note that the weights displayed in this catalogueare available through EPDC (DNS-System/JDPoint).
Front base weights
Models: 6230 - 6630Note:not compatible with front PTO
Models: 6230Note:not compatible with front PTONote: if tractor is equipped with a 551 Series front
loader only this front weight support could be installed (as it is dimensionally smaller than AL176563 front weight support, 60 kg)
Models: 6230 - 6930, 7430, 7530Note:not compatible with front PTO
Quick-tatch weights
Models: 6230 - 6930, 7430, 7530Note: includes 10 x 50 kg left (L38449)
and 10 x 50 kg right (L38450)
Front weight stop kit
Models: 6230 - 6930, 7430, 7530
Mounting kits For 6 - 18 quick-tatch weights
Models: 6230 - 6930, 7430, 7530
Code Bundle Description
AL176563 Front weight support, 60 kg(for max. 14 quick-tatch weights)
Code Bundle Description
8770 AL176564 Front weight support, 70 kg(for max. 14 quick-tatch weights)
Code Bundle Description
8771 AL176565 Front weight support, 110 kg(for max. 18 quick-tatch weights)
Code Bundle Description
AL71258 Set of 20 quick-tatch weights,50 kg each
Code Bundle DescriptionAL119964 Front weight stop kit, 2 x 50 kg
Code Bundle Description
AL119967 Mounting parts for 6, 8, 10quick-tatch weights
Issue 10-2006 (RI, RII) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6030 Series Premium Tractors-31
Models: 6230 - 6930, 7430, 7530
Models: 6230 - 6930, 7430, 7530
Pick-up weight - 1150 kg
Models: 7430, 7530Note: for tractors with MFWD only
Code Bundle Description
AL119968 Mounting parts for 12 & 14quick-tatch weights
Code Bundle Description
AL82932 Mounting parts for 16 & 18quick-tatch weights
Code Bundle Description9510 AL172542 Pick-up weight, 1150 kg
6030 Series Premium Tractors-32 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 10-2006 (RI, RII)
Pick-up weight - 900 kgFits on all 6030 Series Premium base weights and maybe installed on tractors with a three-point hitchinstalled either at the fornt or the rear.
Models: 6330 - 6930, 7430, 7530Note: for tractors with MFWD only, cannot be
installed in combination with front weights
Center link bracketRequired, if pick-up weight is used on the rear or front3-point hitch. Includes two spacer bushings, if 400 kgcentre pick-up weight section only is used in the 3-point hitch.
Models: 6230 - 6930, 7430, 7530
Pick-up weight - 650 kgThe 650 kg concrete additional weight may beinstalled only on tractors with a three-point hitchinstalled either at the front or the rear.
Models: 6230 - 6930Note: for tractors with MFWD only
Code Bundle Description9508 AL112166 Pick-up weight, 900 kg
Code Bundle Description
9515 AL113121 Center link bracket for pick-up weight (with distance tubes)
Code Bundle Description
AL120009 Pick-up weight, 650 kg (concrete weight)
Issue 10-2006 (RI, RII) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6030 Series Premium Tractors-33
Horicon weight Package8 x 20 kg front weights with 20 kg carrier attached tothe front of frame behind a front weight.
Models: 6230 - 6930Note: install only with 110 kg base weight
Front shields
Models: 6530 - 6930
REAR WHEEL WEIGHTS
Rear wheel weight - 38,5 kgFor steel wheels 28” and bigger on flanges.
Models: 6230 - 6930, 7430, 7530Note: Includes first set of parts bolted to the rim
(base mounting parts).
Models: 6230 - 6930, 7430, 7530Note: Includes additional set of parts (if base
mounting parts included in AL119955 are installed).
Rear wheel weight - 55 kgFor steel wheels 34” - 38” on flange axles.
Models: 6230 - 6930, 7430, 7530Note: Includes first set of parts bolted to the rim
(base mounting parts).
Code Bundle DescriptionAL160627 Horicon weight package, 180 kg
Code Bundle DescriptionAL157298 Front shield
Code Bundle Description
AL119955 Rear wheel weight set, 77 kg (2 x 38,5 kg)
Code Bundle Description
AR56632 Rear wheel weight set, 77 kg (2 x 38,5 kg)
Code Bundle Description
9525 AR56636 Rear wheel weight set, 110 kg(2 x 55 kg)
6030 Series Premium Tractors-34 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 10-2006 (RI, RII)
Models: 6230 - 6930, 7430, 7530Note: Includes additional set of parts (if base
mounting parts included in AR56636 are installed).
Code Bundle Description
9525 AL119956 Rear wheel weight set, 110 kg(2 x 55 kg)
Issue 10-2006 (RI, RII) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6030 Series Premium Tractors-35
5.3 CHASSIS PARTS
Rigid front fendersFor saver high speed road transport and reduced tractorsoiling. Large, full-coverage flexible front fenderswith wide range of adjustments to adapt to thedifferent tread settings to protect the cab from mud anddebris.
Models: 6230 - 6430
Models: 6230 - 6930
Models: 6230 - 6930
Models: 6230 - 6930, 7430, 7530
Models: 6230 - 6930, 7430, 7530
Turnable front fendersA single arm fender for MFWD axles offers a greatersteering angle. It stops at the frame and turns while thetires move further until the maximum steering angle isreached. The turning circle now is the same as ontractors without fenders.
Models: 6230 - 6530Note: for front loader application an additional fender
stop panel AL165335 (6230 - 6430) or AL165336 (6530) has to be ordered separately
For tire sizes:• 11.2R28• 12.4R24• 12.4R28• 280/85R28• 320/85R24• 320/85R28
Code Bundle Description8841 AL173809 Rigid front fender, 355 mm width
Code Bundle Description8841 AL173795 Rigid front fender, 410 mm width
Code Bundle Description8841 AL173796 Rigid front fender, 470 mm width
Code Bundle Description8841 AL173797 Rigid front fender, 520 mm width
Code Bundle Description8841 AL173793 Rigid front fender, 600 mm width
Code Bundle Description8842 AL164705 Turnable front fender, 355 mm width
6030 Series Premium Tractors-36 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 10-2006 (RI, RII)
Models: 6230 - 6830Note: for front loader application an additional fender
stop panel AL165335 (6230 - 6430) or AL165336 (6530 - 6830) has to be ordered separately
Note:not for APL 2060For tire sizes:
• 13.6R24• 13.6R28• 14.9R24• 14.9R28• 340/85R24• 340/85R28• 380/70R24• 380/70R28• 380/85R24• 380/85R28
Models: 6230 - 6930, 7430, 7530Note: for front loader application an additional fender
stop panel AL165335 (6230 - 6430) or AL165336 (6530 - 6830) has to be ordered separately; for 6930, 7430 and 7530 with front loader application no stop panel is needed
Note:not for APL 2060For tire sizes:
• 16.9R24• 16.9R28• 16.9R30• 420/70R24• 420/70R28• 420/85R24• 420/85R28• 420/85R30• 440/65R24
Models: 6230 - 6930, 7430, 7530Note: for front loader application an additional fender
stop panel AL165335 (6230 - 6430) or AL165336 (6530 - 6830) has to be ordered separately; for 6930, 7430 and 7530 with front loader application no stop panel is needed
Note: not for APL 2060For tire sizes:
• 480/65R24• 480/65R28• 480/70R24• 480/70R28• 480/70R30
Code Bundle Description8842 AL164706 Turnable front fender, 410 mm width
Code Bundle Description8842 AL164707 Turnable front fender, 470 mm width
Code Bundle Description8842 AL164708 Turnable front fender, 520 mm width
Issue 10-2006 (RI, RII) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6030 Series Premium Tractors-37
Fender side extensions
The fender extensions are a one piece design. They arecompatible for use with snow chains on the rearwheels, for example for forestry applications. Coverlarge tires and significantly reduce soiling of tractorand cab.
Models: 6230 - 6930, 7430, 7530Note:6530 and 6630 with suspended cabFor tire sizes:
• 18.4R38• 460/85R38
Models: 6230 - 6930, 7430, 7530For tire sizes:
• 13.6R38• 14.9R38• 16.9R34• 16.9R38• 18.4R34• 18.4R38• 420/85R38• 460/85R38• 480/70R34• 480/70R38• 520/70R38• 540/65R38
Models: 6230 - 6930, 7430, 7530Note:7430 and 7530 with suspended cabFor tire sizes:
• 20.R38• 520/70R38• 520/85R38• 580/70R38• 600/65R38• 650/65R38
Models: 6230 - 6930, 7430, 7530For tire sizes:
• 20.R38• 520/70R34• 520/70R38• 520/85R38• 540/65R38• 600/65R38• 650/65R38
Fender extensionFor heavy duty work and bad weather conditionsJohn Deere offers a mud flap kit for 6030 SeriesPremium tractors. The mud flap provides an additionalprotection to avoid dirt on your tractor and followingvehicles. It is made of rugged and flexible rubber, thatbears up against worst application conditions. The kitfits to all 6030 Series Premium tractors with a 190 mmwidth fender extensions.
Code Bundle DescriptionFender side extension, 110 x 15 mm(4.33 x 0.59 inch)
AL120094 Mounting parts for fender extensionL151637 Fender extension, LH, 110 x 15 mmL151743 Fender extension, RH, 110 x 15 mm
Code Bundle Description
8900 AL174768 Fender side extension, 110 x 60 mm (4.33 x 2.36 inch)
Code Bundle DescriptionFender side extension, 190 x 20 mm(7.48 x 0.79 inch)
AL120094 Mounting parts for fender extensionL151638 Fender extension, LH, 190 x 20 mmL151745 Fender extension, RH, 190 x 20 mm
Code Bundle Description
8900 AL174770 Fender side extension, 190 x 65 mm (7.48 x 2.56 inch)
6030 Series Premium Tractors-38 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 10-2006 (RI, RII)
Models: 6230 - 6930, 7430, 7530Note:can only be installed if the tractor already has a
190 x 65 mm or 190 x 20 mm side-extension on its fenders.
Mud Guards
Models: 6230 - 6930, 7430, 7530Note:with suspended cab
Models: 6230 - 6430Note: without suspended cab
Code Bundle DescriptionAL159975 Fender extension
Code Bundle DescriptionAL174142 Mud guard for step
Code Bundle DescriptionAL174141 Mud guard for step
Issue 10-2006 (RI, RII) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6030 Series Premium Tractors-39
5.4 AXLES
Extensions Rear axleRear axle extensions are available to match differenttread settings.
Models: 6230, 6330Note: In combination with rear wheels with bolt circle
measuring 203 mm in dia.Note: Increased tread setting from 1912 mm-1976 mm
Models: 6230, 6330Note: In combination with rear wheels with bolt circle
measuring 203 mm in dia.Note: Increased tread setting from 1916 mm-2004 mm
Models: 6230, 6330Note:order addionally: 1 x L116668
reinforcement ringNote: Increased tread setting from 1912 mm-2138 mm
Front axle
Models: 6230, 6330
Note: In combination with front wheels with bolt circle measuring 275 mm in dia.
Note: Increased tread setting from 2016 mm-2134 mm
Track extension front and rear axleThe extended track and extra-wide vehicle lighting areintended only for 6-cylinder tractors with a 335 mm(13.19 inch) hole-circle diameter on front wheels andwith a 275 mm (10.83 inch) hole-circle diameter onrear wheels.In order to work as efficient as possible, progress inrow planting and the use of wider attachments demandflexible track widths. To meet these demands JohnDeere offers track extensions for 6030 Series Premium6-cylinder tractor models.With the help of the extended track, it is possible tocover more rows at once and to ride within the rowswithout affecting cultivations or banks. For sprayerapplications the new field installation kits provideanother advantage: the extended track of the tractorallows a superior support and balance adjustment ofthe sprayer.Two different extensions are available:
• Extension 2 x 94 mm provides a track extension to2000 mm. Depending on the overall tractor width,additional lighting kits for extra-wide vehicles areavailable.
• Extension 2 x 219 mm provides a track extensionto 2250 mm. Due to the resultant overall tractorwidth the kit also includes extra-wide vehiclelighting and a warning sign.
Code Bundle Description
AL156776 Distance hub, 30 mm, for rear axle extension
Code Bundle Description
8921 AL156779 Distance hub, 44 mm, for rear axle extension
Code Bundle Description
8922 AL156777 Distance hub, 111mm, for rear axle, treadadjusting
Code Bundle Description
8925 AL156778 Distance hub, 60mm, for centering the front wheels
6030 Series Premium Tractors-40 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 10-2006 (RI, RII)
Models: 6530 - 6930, 7430, 7530Note:Maximum overall width of 2550 mm (100.4 inch)Note:Must NOT be installed on tractors with dual
wheelsNote: Important when extending the track of the rear
axle and rear wheels are attached by studs and wheel nuts: length of studs has to be 120 mm (4.72 inch) and wheel nuts has to be M20 x 1.5. If required, please order 16 x L150648 (stud) and 16 x 14M7499 (wheel nut) separately.
Note: Important when extending the track of the rear axle and rear wheels are attached by wheel bolts: wheel bolts has to be M20 x 1.5 x 95 cap screws. If required, please order 16 x L152520 (wheel bolt) separately.
Models: 6530 - 6830Note: Maximum overall width of 2750 mm (108.3 inch)Note: Must NOT be installed on tractors with dual
wheelsNote: Important when extending the track of the rear
axle and rear wheels are attached by studs and wheel nuts: length of studs has to be 120 mm (4.72 inch) and wheel nuts has to be M20 x 1.5. If required, please order 16 x L150648 (stud) and 16 x 14M7499 (wheel nut) separately.
Note: Important when extending the track of the rear axle and rear wheels are attached by wheel bolts: wheel bolts has to be M20 x 1.5 x 95 cap screws. If required, please order 16 x L152520 (wheel bolt) separately.
Models: 6530 - 6830Note: Maximum overall width of 2750 - 3000 mm
(108.3 - 118 inch)Note: Must NOT be installed on tractors with dual
wheels
Code Bundle Description
AL162738 Track extended to 2000 mm(78.74 inch)
Code Bundle Description
AL164385Track extended to 2000 mm(78.74 inch) with extra-wide vehicle lighting
Code Bundle Description
AL162739Track extended to 2250 mm(88.58 inch) with extra-wide vehicle lighting and warning sign
Issue 10-2006 (RI, RII) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6030 Series Premium Tractors-41
Models: 6530 - 6930, 7430, 7530Note:Maximum overall width of 2750 - 3000 mm
(108.3 - 118 inch)
Models: 6530 - 6930, 7430, 7530Note:Maximum overall width of 2750 mm (108.3 inch)
Reinforcement of rear wheelsFor heavy-duty operations in the field, the rear wheels(on flanged rear axle with fine thread) can be re-inforced with this kit.
Models: 6530 - 6930, 7430Note:On tractors not equipped with a second spacer
ring, follwing parts must be ordered in addition:
Code Bundle Description
AL164386 Extra-wide vehicle lighting and warning sign
Code Bundle DescriptionAL169786 Extra-wide vehicle lighting
Code Bundle Description
AL155035 Rear wheel reinforcement for heavy duty operations in the field
Bundle Description Remark QTY
L152520 M20 x 1.5 x 95 cap screw
for tractors with 80 mm long wheel bolts 16
24M7242 Washer for tractors with 80 mm long wheel bolts 16
L150648 M20 x 1.5 x 120 stud for tractors with 105 mm long studs 16
6030 Series Premium Tractors-42 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 10-2006 (RI, RII)
5.5 BRAKES AND STEERING
Hydraulic trailer brakeThe hydraulic trailer brake system gives a powerful,safe braking function. The tractor brake-pedal operatedsystem gives a trailer braking function proportional tothe pressure applied to the pedal.The field kits below permit the tractor to be retro-fittedwith an hydraulic trailer brake.
Models: 6230 - 6630Note: Depending on the options of the tractor,
additional spare parts may be required.
Models: 6830, 6930Note: Depending on the options of the tractor,
additional spare parts may be required.
Models: 7430, 7530Note: Depending on the options of the tractor,
additional spare parts may be required.
Code Bundle Description9350 AL173904 Hydraulic trailer brake
Bundle Description Remark QTY
AL172828 Hydraulic trailer brake valve (I = 6)
not for UK
for 6330, 6430 tractors with MFWD
6530, 6630 tractorswith or without MFWD
1
AL172829 Hydraulic trailer brake valve (I = 9,2)
6230 with or without MFWD
for 6330, 6430 without MFWD
for UK: 6230 - 6630 with or without MFWD
1
AL170827 Inlet valve forPrio 2 options
if tractor is not equipped with a suspended cab,a TLS-axle or a electro-hydraulic controlledpick-up hitch control valve
1
Code Bundle Description9350 AL173905 Hydraulic trailer brake
Bundle Description Remark QTY
AL172828Hydraulic trailer brake valve (I = 6) 1
AL170827 Inlet valve forPrio 2 options
if tractor is not equipped with a suspended cab,a TLS-axle or a electro-hydraulic controlledpick-up hitch control valve
1
Code Bundle Description9350 AL173906 Hydraulic trailer brake
Bundle Description Remark QTY
AL172828Hydraulic trailer brake valve (I = 6) 1
AL170827 Inlet valve forPrio 2 options
if tractor is not equipped with a suspended cab,a TLS-axle or a electro-hydraulic controlledpick-up hitch control valve
1
Issue 10-2006 (RI, RII) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6030 Series Premium Tractors-43
Pneumatic trailer brakeThe pneumatic trailer brake system consists basicallyof a two line system. This is the same as used today oncommercial vehicles.Pre-braking function:
• short brake pedal travel allows braking of thetrailer without braking the tractor. This feature isrequired to control the trailer and prevent jackknifing.
• A quick release valve opens the trailer brakeimmediately after release of the brake pedal forbetter acceleration.
Single line systems for pneumatic trailer brakes areavailable as well. These kits are supplementary to thedual-line systems, they can not be used stand alone.The dual-line system has to be installed first before thesingle line system should be ordered.The field kits below permit the tractor to be retro-fittedwith a pneumatic trailer brake system. The pneumatictrailer brake system may be installed only on tractorsequipped with a handbrake.
Models: 6230 - 6930, 7430, 7530
Models: 6230 - 6630Note:without front axle brakeNote: Depending on the options of the tractor,
additional spare parts may be required.
Models: 6230 - 6630Note:with front axle brakeNote: Depending on the options of the tractor,
additional spare parts may be required.
Code Bundle Description
AL171459 Pneumatic trailer brake,single-line system
Code Bundle Description
9356 AL171451 Pneumatic trailer brake,dual-line system
Bundle Description Remark QTY
AL171455 Additional partsfor air supply 1
AL171488Additional parts for enginewith air-conditioning(dual-line system)
6230 - 6430 1
AL171491Additional parts for enginewith air-conditioning(dual-line system)
6530, 6630 1
AL171490Additional parts for engine without air-conditioning(dual-line system)
1
AL160421 Yellow coupler for UK only 1AL160422 Red coupler for UK only 1
L101118 20 m (787.40 in.)compressed-air line (12 x 1.5) 1
L100264 11 m (433.07 in.)compressed-air line (6 x 1.0) 1
Code Bundle Description
9356 AL171452 Pneumatic trailer brake,dual-line system
Bundle Description Remark QTY
AL171455 Additional partsfor air supply 1
AL171488Additional parts for enginewith air-conditioning (dual-line system)
6230 - 6430 1
AL171491Additional parts for enginewith air-conditioning(dual-line system)
6530, 6630 1
AL171490Additional parts for engine without air-conditioning(dual-line system)
1
AL160421 Yellow coupler for UK only 1AL160422 Red coupler for UK only 1
L101118 20 m (787.40 in.)compressed-air line (12 x 1.5) 1
L100264 11 m (433.07 in.)compressed-air line (6 x 1.0) 1
6030 Series Premium Tractors-44 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 10-2006 (RI, RII)
Models: 6830, 6930, 7430, 7530Note:without front axle brakeNote: Depending on the options of the tractor,
additional spare parts may be required.
Models: 6830, 6930, 7430, 7530Note: with front axle brakeNote: Depending on the options of the tractor,
additional spare parts may be required.
Code Bundle Description
9356 AL171453 Pneumatic trailer brake,dual-line system
Bundle Description Remark QTY
AL171455 Additional partsfor air supply 1
AL171494Additional parts for enginewith air-conditioning(dual-line system)
6830, 6930 1
AL171497Additional parts for enginewith air-conditioning(dual-line system)
7430, 7530 1
AL171496Additional parts for engine without air-conditioning(dual-line system)
1
AL160421 Yellow coupler for UK only 1AL160422 Red coupler for UK only 1
L101118 20 m (787.40 in.)compressed-air line (12 x 1.5) 1
L100264 11 m (433.07 in.)compressed-air line (6 x 1.0) 1
Code Bundle Description
9356 AL171454 Pneumatic trailer brake,dual-line system
Bundle Description Remark QTY
AL171455 Additional partsfor air supply 1
AL171494Additional parts for enginewith air-conditioning(dual-line system)
6830, 6930 1
AL171497Additional parts for enginewith air-conditioning(dual-line system)
7430, 7530 1
AL171496Additional parts for engine without air-conditioning(dual-line system)
1
AL160421 Yellow coupler for UK only 1AL160422 Red coupler for UK only 1
L101118 20 m (787.40 in.)compressed-air line (12 x 1.5) 1
L100264 11 m (433.07 in.)compressed-air line (6 x 1.0) 1
Issue 10-2006 (RI, RII) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6030 Series Premium Tractors-45
5.6 STORAGE Tool boxAn external detachable and lockable tool box withconvenient carrying handle is located in front of thecab. It has the capacity to hold tools and a selection oflinkage balls, hitch pins and linchpins for implementattachment.
Models: 6230 - 6930Note:The toolbox is secured to the left hand-grip
of the cab using a strap.
Models: 7430 - 7530Note:The bracket for the toolbox is installed
below the cab.
Additional storage container - 45l
With a capacity of 45 l and a 45 kg maximum payloadthis sheet metal storage container offers additionalspace, e.g. for rubber boots, oil cans, bulky tools,grease guns etc.Equipped with 2 handles at the side it can easily becarried. With the help of the included quick lock pinthe container can be closed rapidly.The fastening on the back allows a quick installation toall existing front weights: base weights, front weightsand the 900 kg / 1150 kg pick-up weights.
Code Bundle Description
8850 AL175285 Sheet metal tool box, mounted at the front of the cab on the left hand side
Code Bundle Description
8850 AL175286 Sheet metal tool box, mounted at the front of the cab on the left hand side
6030 Series Premium Tractors-46 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 10-2006 (RI, RII)
Models: 6230 - 6930, 7430, 7530Note:45 kg maximal payload; only for front
installation: attachable to base weights, front weights and 900 kg pick-up weight.
Code Bundle DescriptionAL120005 Storage container, 45 l
Issue 10-2006 (RI, RII) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6030 Series Premium Tractors-47
5.7 HITCHES AND ASSOCIATED EQUIPMENT
Release cablesFor upper and lower link hooks including hardware(screws, clamps, holder etc.)
Models: 6230 - 6930, 7430, 7530
Remote control switch unit (Mini-Flap)
Models: 6230 - 6930, 7430, 7530
Models: 6230 - 6930, 7430, 7530
E-SCV remote control switch
Models: 6230 - 6930, 7430, 7530Note:could be installed on the left hand side or on the
right hand side of the remote control switch unit
PTO remote control switch
Models: 6230 - 6930, 7430, 7530Note:could be installed on the left hand side or on the
right hand side of the remote control switch unit
Code Bundle Description
AL81619 Cables for controlling the center link and draft links
Code Bundle Description
AL174742 Remote control switch unit (Mini-Flap)for left hand side
Code Bundle Description
AL174743 Remote control switch unit (Mini-Flap)for right hand side
Code Bundle DescriptionAL174741 E-SCV remote control switch
Code Bundle DescriptionAL174740 PTO remote control switch
6030 Series Premium Tractors-48 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 10-2006 (RI, RII)
Stabilizer bar “Economy” For use only with cat. II and cat. III flat bar draft links.These provide manual adjustment of lateral hitchmovement.
Models: 6230 - 6630
Models: 6830, 6930
Automatic stabilizer barAutomatic stabilzer bars offer for the respectiveimplements the possiblity to have:
• lateral sway over a self defined lower rangeand no sway above, or
• no sway over the whole range
Models: 6230 - 6630
Models: 6830, 6930
Code Bundle DescriptionAL117961 Stabilizer bar “Economy”
Code Bundle DescriptionAL151119 Stabilizer bar “Economy”
Code Bundle Description
AL171016 Automatic stabilizer bars,right hand and left hand
Code Bundle Description
AL159255 Automatic stabilizer bars,right hand and left hand
Issue 10-2006 (RI, RII) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6030 Series Premium Tractors-49
Stabilizer chains with sway control blocksFor almost universal implement control.
Models: 6230 - 6630Note: for tractors with telescopic lift link or flat steel
lift link order in addition:
Swinging drawbar
Drawbars are adjustable in length and the swingingfeature can also be locked out.
Models: 6530 - 6930, 7430
Models: 6830 - 6930, 7430, 7530Note:not used with Powrshift transmission
Code Bundle DescriptionAL80849 Stabilizer chains
Bundle Description QTYL79378 Console for cat. II or cat. III 219M7489 Screw M16x45 for cat. II 419M7409 Screw M16x50 for cat. III 4
Code Bundle Description9441 AL80054 Swinging drawbar with hammer strap
Code Bundle Description
9441 AL81349 Swinging drawbar with hammer strap, includes swinging drawbar L115073
6030 Series Premium Tractors-50 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 10-2006 (RI, RII)
Models: 6830 - 6930, 7430, 7530Note:used with Powrshift transmission
Hitch Holder for upper wagon hitchChanging the implement from trailer to three-pointhitch in the field and not knowing where to put theupper trailer hitch.John Deere offers the solution - the hitch holder for theupper wagon hitch. The holder is a convenient solutionthat can easily be mounted within minutes onto allkinds of front weights with coupling recess. Thewagon hitch can easily be affixed and is stored in aconvenient height you can reach without stooping.The holder is adjusted with two fixing screws thatagain can be adjusted in two widths depending on theweight the holder has been mounted onto.
Models: 6830 - 6930, 7430, 7530
Load control shaft, support
Models: 6830, 6930
Code Bundle Description
AL119419 Swinging drawbar, includes swinging drawbar AL151017
Code Bundle DescriptionAL165650 Hitch holder for upper trailer hitch
Code Bundle DescriptionAL160835 Load control shaft support
Issue 10-2006 (RI, RII) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6030 Series Premium Tractors-51
Hydraulic Center Link
Models: 6230 - 6630
Models: 6530, 6630
Models: 6830, 6930, 7430, 7530
Code Bundle Description
7382 AL174550 Hydraulic Center Link(Cat. 3/70)
Code Bundle Description
7382 AL177081 Hydraulic Center Link(Cat. 3/90)
Code Bundle Description
7382 AL174551 Hydraulic Center Link(Cat. 3/90)
6030 Series Premium Tractors-52 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 10-2006 (RI, RII)
Hydraulic pick-up hitch (SCV controlled)
Models: 6230 - 6630
Models: 6230 - 6630Note:Depending on the options of the tractor,
additional spare parts may be required:
Models: 6830, 6930
Models: 6830, 6930Note: Depending on the options of the tractor,
additional spare parts may be required:
Models: 7430, 7530
Models: 7430, 7530Note: Depending on the options of the tractor,
additional spare parts may be required:
Code Bundle Description
AL174109Field installation kit forhydraulic pick-up hitch(manually actuated)
Code Bundle Description
AL174443Control components for upgrading AL174109 to electro-hydraulic controlled pick-up hitch
Bundle Description Remark QTY
AL174516 Inlet valve forPrio 2 option
if tractor is not equipped with a suspended cabcontrol valve
1
AL174348 3-terminal socketat C-Post 1
L167830 Spacer, 58 mmif tractor is not equipped with a suspended cabcontrol valve
1
L167831 Spacer, 44 mm 1
Code Bundle Description
AL174110Field installation kit forhydraulic pick-up hitch(manually actuated)
Code Bundle Description
AL174444Control components for upgrading AL174110 to electro-hydraulic controlled pick-up hitch
Bundle Description Remark QTY
AL174516 Inlet valve forPrio 2 option
if tractor is not equipped with a suspended cabcontrol valve
1
AL174348 3-terminal socketat C-Post 1
L167830 Spacer, 58 mmif tractor is not equipped with a suspended cabcontrol valve
1
L167831 Spacer, 44 mm 1
Code Bundle Description
AL174111Field installation kit forhydraulic pick-up hitch(manually actuated)
Code Bundle Description
AL174445Control components for upgrading AL174111 to electro-hydraulic controlled pick-up hitch
Bundle Description Remark QTY
AL174516 Inlet valve forPrio 2 option
if tractor is not equipped with a suspended cab control valve
1
AL174348 3-terminal socketat C-Post 1
L167830 Spacer, 58 mmif tractor is not equipped with a suspended cabcontrol valve
1
L167831 Spacer, 44 mm 1
Issue 10-2006 (RI, RII) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6030 Series Premium Tractors-53
Drawbar
Models: 6230 - 6930, 7430, 7530
Wagon hitch release
Models: 6230 - 6630
Models: 6230 - 6930, 7430, 7530Note:Depending on the options of the tractor,
additional spare parts may be required:
Low position hitcheswith 3-in-1 wagon hitch
Models: 6230 - 6930, 7430, 7530
Models: 6230 - 6930, 7430, 7530
Code Bundle Description
AL157346 Drawbar with storage for JD pick-up hitch
Code Bundle DescriptionAL174221 Wagon hitch release, fixed
Code Bundle DescriptionAL174220 Wagon hitch release, 9-position
Bundle Description Remark QTY
AL171246 Push-pull cablewith height-adjustable trailer hitch and without suspended cab
1
AL171269 Push-pull cablewith height-adjustable trailer hitch and with suspended cab
1
AL171267 Push-pull cable for 7430, 7530 1
Code Bundle Description9419 AL163693 Rail with piton fix insert slider
Code Bundle DescriptionAL163696 Piton fix insert slider
Bundle Description Remark QTY
6030 Series Premium Tractors-54 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 10-2006 (RI, RII)
Models: 6230 - 6930, 7430, 7530
Models: 6230 - 6930, 7430, 7530
Low position wagon hitchesfor 9-position rail
Models: 6230 - 6930, 7430, 7530Note: for 9-position rail only
Models: 6230 - 6930, 7430, 7530Note: for 9-position rail only
Forced steering system
Models: 6230 - 6930, 7430, 7530
Yoke for draft link supportHinged to the left and right hand side rear axle, itprotects the draft sensor pins from shock loads underextreme draft work.
Models: 6330 - 6630
Code Bundle Description9405 AL163694 Rail with ball type insert slider
Code Bundle DescriptionAL163697 Ball type insert slider
Code Bundle Description
AL176731 Wagon hitch height-adjustable,piton fix
Code Bundle Description
AL176726 Wagon hitch height-adjustable,ball
Code Bundle Description
AL176728Forced steering system (one side)for wagon hitch height-adjustable,ball type
Code Bundle DescriptionAL78129 Yoke for draft link support
Issue 10-2006 (RI, RII) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6030 Series Premium Tractors-55
5.8 VANDALISM PROTECTION KITS
Latch for oil filler neck
Models: 6230 - 6630
Vandalism protection
Models: 6230 - 6430
Models: 6530 - 6930, 7430, 7530
Code Bundle Description
AL110170 Field kit, latch for oil filler neck, transmission - vandalism protection Code Bundle Description
AL175117 Vandalism protection(lock for side panel and hood)
Code Bundle Description
AL175118 Vandalism protection(lock for side panel and hood)
6030 Series Premium Tractors-56 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 10-2006 (RI, RII)
Security door lock kitLocking the cab with an individual key, different fromthe standard ignition key, is helpful for many differentapplications of the tractor. John Deere therefore offersthe Security door lock field installation kit. It featuresan individual key system that prevents misuse of thestandard ignition key. This field kit provides individualsecurity by individual keys for all equipment keptinside the cab. The kit comes with four keys, in case ofdamage or loss a blank key can be ordered.
Models: 6230 - 6930, 7430, 7530Note: if needed please order in addition:
Code Bundle DescriptionAL71345 Security door lock kit
Bundle Description QTYAL71350 Blank key 1
Issue 10-2006 (RI, RII) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6030 Series Premium Tractors-57
Numerical Index
Bundle No. Page Bundle No. PageAL71258 30 AL162739 40AL71345 56 AL163513 10AL78129 54 AL163693 53AL80054 49 AL163694 54AL80126 24 AL163696 53AL80127 24 AL163697 54AL80849 49 AL163826 27AL81349 49 AL164385 40AL81619 47 AL164386 41AL82932 31 AL164705 35AL110170 55 AL164706 36AL112070 26 AL164707 36AL112166 32 AL164708 36AL113121 32 AL165650 50AL117734 23 AL168015 28AL117961 48 AL169786 41AL118241 10 AL170399 5AL119292 22 AL170400 5AL119419 50 AL170401 6AL119955 33 AL171016 48AL119956 34 AL171451 43AL119964 30 AL171452 43AL119967 30 AL171453 44AL119968 31 AL171454 44AL120005 46 AL171459 43AL120009 32 AL171547 25AL151119 48 AL172542 31AL151224 23 AL172591 9AL155035 41 AL172593 9AL156243 10 AL173288 2AL156731 27 AL173290 3AL156776 39 AL173291 3AL156777 39 AL173422 4AL156778 39 AL173423 4AL156779 39 AL173569 23AL157298 33 AL173570 23AL157346 53 AL173654 4AL157620 26 AL173793 35AL158520 11 AL173795 35AL158767 24 AL173796 35AL158986 29 AL173797 35AL159255 48 AL173809 35AL159939 10 AL173828 19AL159975 38 AL173904 42AL160627 33 AL173905 42AL160835 50 AL173906 42AL162738 40 AL173952 11
Bundle No. Page Bundle No. PageAL173953 11 AL174931 7AL173954 11 AL174932 7AL174109 52 AL174933 7AL174110 52 AL174934 8AL174111 52 AL174997 17AL174141 38 AL175020 28AL174142 38 AL175021 28AL174158 1 AL175022 28AL174160 2 AL175023 28AL174161 1 AL175024 29AL174162 2 AL175025 29AL174164 2 AL175117 55AL174165 2 AL175118 55AL174214 15 AL175285 45AL174215 16 AL175286 45AL174219 24 AL175376 20AL174220 53 AL175575 13AL174221 53 AL175583 13AL174225 18 AL175596 21AL174227 29 AL175597 21AL174229 14 AL175598 22AL174234 22 AL175599 22AL174263 26 AL175679 23AL174264 26 AL176040 18AL174329 15 AL176145 8AL174332 12 AL176254 18AL174341 12 AL176291 8AL174341 15 AL176563 30AL174344 12 AL176564 30AL174345 14 AL176565 30AL174348 17 AL176726 54AL174350 19 AL176728 54AL174359 27 AL176731 54AL174410 29 AL176910 20AL174443 52 AL177081 51AL174444 52 AR56632 33AL174445 52 AR56636 33AL174550 51 RE67013 16AL174551 51 RE67014 16AL174696 17 RE67015 16AL174697 17 RE67016 16AL174740 47 RE218823 25AL174741 47 RE243241 25AL174742 47 RE243242 25AL174743 47AL174768 37AL174770 37