Technical & industrial expertiseOur mechanical, electronic, thermal, lighting and optical skills allow the design and assembly of new on-board solutions
Quality & GuaranteesOur designs give you the benefit of 60 years feedback from experience, comply with regulations and current standards, and benefit from a guarantee*
*Guarantee duration varies depending on the product
Control of company processes: description, performance, efficiency monitoring and analysis, interaction analysis, operating reviews
QSE***** Management System control
QSE***** training, awareness and commu-nication
Audit implementation and external audit managementDocument and record control (document management)
Listening to interested parties (customer and internal)
Identification of preventive and corrective actions
Measurement and test equipment installation and maintainability
Detected at the customer and internally: identification and processing of non-conformities internally or at the supplier, making the customer safe and analysing causes
Identification and prevention of product risks: FMECA*, railway RAMS**, PRA***, risk ranking, product approval plans, monitoring plans, etc. according to customer and regulatory requirements
Supplier evaluation and audit, identification of our requirements (PES****), new or modified pro-duct type approval and accep-tance inspection
Identification and prevention of risks in the process FMECA* and monitoring plan writing.Process audits, performance measurements.
Business ethics
Responsible purchasing
Compliance with regulations and other obligations
Prevention and control of environmental aspects
Ecodesign
Consumption monitoring
Maintaining ISO 14001 certification Management of the environment
Health and Safety risk prevention and control
Quality of life at work
Maintaining OHSAS* 18001 certification for health and safety at work management
Non conforming
product control
Economic issues
Environmental issues
Social issues
System quality
Equipment control
Control of project
design and development
Procurement control
Product and manufactu-ring process
control
UNIQUE INDUSTRIAL KNOW-HOW
QUALITY MANAGEMENT
CORPORATE SOCIAL RESPONSABILITY
* FMECA = Failure Modes, Effects and Criticality Analysis - ** RAM = Reliability, Availability, and Maintainability - *** PRA = Probabilistic Risk Assessment**** PES = Product Evaluation Sheet - ***** QSE = Quality Security Environment
* OHSAS = Occupational Health and Safety Advisory Services
TAILOR-MADE PRODUCT CREATION…
In parallel with its catalogue offer, SESALY designs tailor-made on-board solutions and offers services for the study, development and production of on-board solutions produced on the basis of Customer requirements specifications, functional & technical specifications
1 COMMERCIAL & TECHNICAL SUPPORT We listen to you, advise you and commit to supply you with catalogue or tailor-made on-board solutions 2 REACTIVITY Our integrated resources allow us to:
. Respond to you within 5 days about the feasibility of versions of our products available in the catalogue
. Respond to your requests for tailor-made solutions in less than 1 month
. Send you acknowledgement of receipt of your order within 48 hours and deliver your products to you quickly
CUSTOMER COMMITMENTS…
SpecificationsClose collaboration between YOU
and our engineers
FeasibilityCost / Performance optimisation
Technical and economic feasibility
PrototypeSpecifications translated into a
prototype
Regulatory qualificationR65, EMC, NF/EN 13272, NF/EN 12352,
NF/EN 62471, R 1004, R118, Dir 95/28/EC, EN 45545-2...
Design/OutlineConforming to the main
specifications
QualificationFunctional tests
Regulatory prequalification
Serial productionIndustrialisation of
your solution
Mock upComplete specifications for samples
Pre-seriesPre-series with tests
1 2 3
4 5 6
7 8 9
Triflash & equipped bars 4
Beacons 14
Lightbars 20
Audible solutions 26
Exterior lights 30
Ceiling lights 38
Marking 42
Vehicle lights 48
Accessories 54
Spares & Notes 62
CONTENTS
2017
Phone : +33 (0)4 72 917 917 - Fax : +33 (0)4 72 917 918 - Email : [email protected] - Web site : www.sesaly.com4
TRIFLASH
Triflash manually lifted 6
Triflash electrically lifted 8
Equipped bars 10
2017
Phone : +33 (0)4 72 917 917 - Fax : +33 (0)4 72 917 918 - Email : [email protected] - Web site : www.sesaly.com 5Do not hesitate to contact us for any other specific request !
Trifl
ash
Equ
ippe
d ba
rs
• AK5 type screen printing (other type on request: AK14, etc.)
• Class 1 or Class 2 film
• Dimensions: 500 mm or 700 mm
• 1 hinge for the 500 mm triangle
• 2 hinges for the 700 mm triangle
• Fixing separation from 150 mm to 160 mm
• Vibration, shock, and UV resistant
• EMC (Electro-Magnetic Compatibility)
• Dual voltage supply: 12/24 V by 6.5 m long cable
• Day/night cell
• Electronic unit protected against polarity reversals and short circuits
• Completely watertight electronic unit, moulded resin to IP 68
Characteristics common to all our Triflash units
Model AK5-700 mm
700 mm
x
xx
Model AK5-500 mm
500 mm
x
xx
page 6
2017
Phone : +33 (0)4 72 917 917 - Fax : +33 (0)4 72 917 918 - Email : [email protected] - Web site : www.sesaly.com6
TRIFLASH
- New structure made of polyamide with glass fiber - Shock & vibration resistant- Light weight : only 2.6 kg- Compact structure : only 44 mm thick
- New LED : 1 high power LED InGaN (3rd generation of LED) per optic - High light intensity : 638 cd (12V & day)- Low power consumption: 0.16 A day (12 V)- High light output ratio : 68 lm/W (25°C ta)- Supplied with 6 optics Ø 50 mm - Flashing lights with wide angle- Lifetime greater than 100,000 hours & maintenance free- Day and night use by automatic switching- Light intensity complies with standards NF EN 12352 and NF P 98475- Complies with CEM R10-5
Reference DesignationTL 700 Triflash Double sided LED - Class 1 - 700 mm
TL 700 CL2 Triflash Double sided LED - Class 2 - 700 mm
STL 700 Triflash Single sided LED - Class 1 - Rear rail fixing - 700 mm
STL 700 CL2 Triflash Single sided LED - Class 2 - Rear rail fixing - 700 mm
STL 700/C Triflash Single sided LED - Class 1 - Hinged - 700 mm
STL 700 CL2/C Triflash Single sided LED - Class 2 - Hinged - 700 mm
TLP 500
TL 700
12/24 VLED
TLP 500.ADH
REFENCES /ORANGE - FRANCE TELECOM - EDF - CITY OF PARIS - GDF
Reference DesignationTLP 500 Triflash Double sided LED - Class 1 - 500 mm
TLP 500.CL2 Triflash Double sided LED - Class 2 - 500 mm
STLP 500 Triflash Single sided LED - Class 1 - Rear rail fixing - 500 mm
STLP 500 CL2 Triflash Single sided LED - Class 2 - Rear rail fixing - 500 mm
STLP 500/C Triflash Single sided LED - Class 1 - Hinged - 500 mm
STLP 500 CL2/C Triflash Single sided LED - Class 2 - Hinged - 500 mm
TLP 500MAG/R Triflash Double sided LED - Class 1 - Magnetic plate with toggle clamp – Cigar lighter plug (max. 40km/h)
TLP 500 CL2MAG/R Triflash Double sided LED - Class 2 - Magnetic plate with toggle clamp – Cigar lighter plug (max. 40km/h)
TLP 500.ADH Triflash Double sided LED - Class 1 - S90 adhesive fixings
TLP 500.ADH.CL2 Triflash Double sided LED - Class 2 - S90 adhesive fixings
New Generation !
- Triflash supplied with 6 R2 type Ø 50 mm flashing lamps- Shock & vibration resistant- 12 high power LEDs per lamp – Wide angle LED- Lifetime greater than 100,000 hours *- Maintenance free- Day and night use by automatic switching- Very low power consumption: 0.2 A day and 0.1 A night (12 V)- Light intensity : complies to NF EN 12352 and NF P 98475 - CEM (Electro- Magnetic Compatibility) : complies to directive 2006/28/CE
* Light output is reduced by 30 % after 100,000 hours
TRIFLASH 500
TRIFLASH 700
Trifl
ash
Equ
ippe
d ba
rs
2017
Phone : +33 (0)4 72 917 917 - Fax : +33 (0)4 72 917 918 - Email : [email protected] - Web site : www.sesaly.com 7Do not hesitate to contact us for any other specific request !
DRILLED FIXINGS*
MAGNETIC & ADHESIVE FIXINGS
FIXING PLATES for TRIFLASH
Reference Designation # of Silent blocks
FIX/500 Fixing plate for Triflash 500 4
FIX/TLP 500/R Fixing plate for Triflash 500 with toggle clamp 4
FIX/700 Fixing plate for for Triflash 700 6
Reference Designation
MAG/TLP 500 Magnetic fixing plate for Triflash 500
MAG/TLP 500/R Magnetic fixing plate for Triflash 500 with toggle clamp
ADH/TLP 500 Adhesive fixing plate for Triflash 500
ADH/TLP 500/R Adhesive fixing plate for Triflash 500 with toggle clamp
TLP 500MAG/R CL1 LED Triflash 500 on magnetic plate with toggle clamp
TLP 500 CL2MAG/R CL2 LED Triangle on magnetic plate with toggle clamp
TLP 500.FIX.ADH CL1 LED Triflash 500 with plate & adhesive fixations & toggle
TLP 500.FIX.ADH.CL2 CL2 LED Triflash 500 with plate & adhesive fixations & toggle
- No drilling needed with below plates available in 2 versions : magnetic or adhesive- Magnetic plates are delivered with with 4 magnets (For a speed less than 40 km/h) and an 8 A universal plug
Reference Designation T/RAB Manual lifted kit with screws
T/RAB.C Manual lifted kit with adhesives
T/RAB.P Manual lifted kit with pulley
Manual folding kit
L = 2 x height of triangle
TRIFLASH MANUAL LIFTED KITS
- Triflash supplied with 6 R2 type Ø 50 mm flashing lamps- Shock & vibration resistant- 12 high power LEDs per lamp – Wide angle LED- Lifetime greater than 100,000 hours *- Maintenance free- Day and night use by automatic switching- Very low power consumption: 0.2 A day and 0.1 A night (12 V)- Light intensity : complies to NF EN 12352 and NF P 98475 - CEM (Electro- Magnetic Compatibility) : complies to directive 2006/28/CE
* Light output is reduced by 30 % after 100,000 hours
Toggle clamp
FIX/TLP 500/R
Providing a uniform distribution of the weight of the triangle on the vehicle roof
* Fixings to be drilled on vehicle roof
TLP 500.FIX.ADH.CL2ADH/TLP 500/RMAG/TLP 500/R TLP 500 CL2MAG/R
FIX/700
2017
Phone : +33 (0)4 72 917 917 - Fax : +33 (0)4 72 917 918 - Email : [email protected] - Web site : www.sesaly.com8
Reference Designation TLP 500.12/ELEC Triflash LED lifted electrically – Class 1 – 500 mm – 12 V
TLP 500.24/ELEC Triflash LED lifted electrically – Class 1 – 500 mm – 24 V
TLP 500.12/ELEC.CL2 Triflash LED lifted electrically – Class 2 – 500 mm – 12 V
TLP 500.24/ELEC.CL2 Triflash LED lifted electrically – Class 2 – 500 mm – 24 V
TL 700.12/ELEC Triflash LED lifted electrically – Class 1 – 700 mm – 12 V
TL 700.24/ELEC Triflash LED lifted electrically – Class 1 – 700 mm – 24 V
TL 700.12/ELEC.CL2 Triflash LED lifted electrically – Class 2 – 700 mm – 12 V
TL 700.24/ELEC.CL2 Triflash LED lifted electrically – Class 2 – 700 mm – 24 V
TLP 500.12/ELEC.B Triflash LED lifted electrically, white – Class 1 – 500 mm – 12 V
TLP 500.24/ELEC.B Triflash LED lifted electrically, white – Class 1 – 500 mm – 24 V
TLP 500.12/ELEC.CL2.B Triflash LED lifted electrically, white – Class 2 – 500 mm – 12 V
TL 700.12/ELEC.B Triflash LED lifted electrically, white – Class 1 – 700 mm – 12 V
TL 700.24/ELEC.B Triflash LED lifted electrically, white – Class 1 – 700 mm – 24 V
TL 700.12/ELEC.B.CL2.B Triflash LED lifted electrically, white – Class 2 – 700 mm – 12 V
- Lift box made in aluminium fairing- Raised by IP 66 electronic actuator- Watertight moulded resin electronic unit
TL 700.12/ELEC.CL2.B
12V or 24 VLED
►Kit of 3 adhesive fixings for mounting
electrically lifted unit on a roof
Tip!
Designation Reference
Kit of 3 adhesive fixings S 99
TRIFLASH ELECTRICALLY LIFTED
TLP 500.12/ELEC
Raising unit
mounted with
point towards
the rear
Trifl
ash
Equ
ippe
d ba
rs
2017
Phone : +33 (0)4 72 917 917 - Fax : +33 (0)4 72 917 918 - Email : [email protected] - Web site : www.sesaly.com 9Do not hesitate to contact us for any other specific request !
LED 12/24 V - BOLT, MAGNETIC OR ADHESIVE FIXINGTriflash switch, & LED beacons’ switch supplied
Class 1 reference Class 2 reference Fixing DesignationCOMBIT512.2GL.FIX COMBIT512.2GL.FIXCL2 Bolt Triflash LED 500 mm – 2 rotating LED beacons
COMBIT512.2FL.FIX COMBIT512.2FL.FIXCL2 Bolt Triflash LED 500 mm – 2 flashing LED beacons
COMBIT712.2GL.FIX COMBIT712.2GL.FIXCL2 Bolt Triflash LED 700 mm – 2 rotating LED beacons
COMBIT712.2FL.FIX COMBIT712.2FL.FIXCL2 Bolt Triflash LED 700 mm – 2 flashing LED beacons
COMBIT512.2GL.ADH COMBIT512.2GL.ADHCL2 Adhesive Triflash LED 500 mm – 2 rotating LED beacons
COMBIT512.2FL.ADH COMBIT512.2FL.ADHCL2 Adhesive Triflash LED 500 mm – 2 flashing LED beacons
COMBIT712.2GL.ADH COMBIT712.2GL.ADHCL2 Adhesive Triflash LED 700 mm – 2 rotating LED beacons
COMBIT712.2FL.ADH COMBIT712.2FL.ADHCL2 Adhesive Triflash LED 700 mm – 2 flashing LED beacons
COMBIT512.2GL.MAG COMBIT512.2GL.MAGCL2 Magnetic Triflash LED 500 mm – 2 rotating LED beacons
COMBIT512.2FL.MAG COMBIT512.2FL.MAGCL2 Magnetic Triflash LED 500 mm – 2 flashing LED beacons
COMBIT712.2GL.MAG COMBIT712.2GL.MAGCL2 Magnetic Triflash LED 700 mm – 2 rotating LED beacons
COMBIT712.2FL.MAG COMBIT712.2FL.MAGCL2 Magnetic Triflash LED 700 mm – 2 flashing LED beacons
For a version with a single revolving light replace 2GL by 1GL or 2FL by 1FL in the reference.Example: COMBIT5.1GL.FIX
For a 24V version replace 12 by 24 in the reference.Example: COMBIT524.2GL.FIX
TRIFLASH COMBINED* *LIFTING UNIT
+
LED BEACONS
COMBIT512.2GL.ADHCOMBIT512.2GL.MAG
2017
Phone : +33 (0)4 72 917 917 - Fax : +33 (0)4 72 917 918 - Email : [email protected] - Web site : www.sesaly.com10
TRIFLASH EQUIPPED BARS
Triflash equipped on universal bars 11
Triflash equipped on adhesive bars 12
Triflash equipped on bars dedicated to vehicles 13
Trifl
ash
Equ
ippe
d ba
rs
2017
Phone : +33 (0)4 72 917 917 - Fax : +33 (0)4 72 917 918 - Email : [email protected] - Web site : www.sesaly.com 11Do not hesitate to contact us for any other specific request !
MAGNETIC OR ADHESIVE FIXINGS
Equipped bars delivered with pre-wired LED beacons & Triflash
Complete prewired assembly can be adapted to light cars (LV) and utility vehicles (UV), comprising LED Triflash + 2 LED beacons (rotating or flashing lights).
Magnetic version: 3 ultra-powerful Ø 180 mm feet + safety strap
For a class 2 Triflash, add .CL2 to the end of the reference
Designation Magnetic fix. reference Adhesive fix. referenceTriflash LED 500 mm + 2 LED beacons with rotating light SMT T5.2GL.MAG SMT T5.2GL.ADH
Triflash LED 500 mm + 2 LED beacons with flashing light SMT T5.2FL.MAG SMT T5.2FL.ADH
Triflash LED 700 mm + 2 LED beacons with rotating light SMT T7.2FL.MAG SMT T7.2FL.ADH
Triflash LED 700 mm + 2 LED beacons with flashing light SMT T7.2FL.MAG SMT T7.2FL.ADH
Magnetic fix. reference Adhesive fix. referenceSMT T5.MAG SMT T5.ADH
SMT T7.MAG SMT T7.ADH
The kit is supplied with a toggle clamp closure system to allow lowering the Triflash (for vehicles with accessible height).A lifted kit is also supplied for high vehicles.
Triflash switch & beacon switches supplied.
TRIFLASH ON UNIVERSAL BARS
Assembly ready to position on the vehicle, without drilling: magnetic or adhesive.
2017
Phone : +33 (0)4 72 917 917 - Fax : +33 (0)4 72 917 918 - Email : [email protected] - Web site : www.sesaly.com12
Our adhesive bars are delivered assembled and ready to install on your vehicle with adhesive fixings !
To order your equipped adhesive bar, please select:1. The bar length suiting your vehicle2. Your beacon type 3. Your triangle class4. Your raising system
1. 2. 3. 4.
Reference Bar length Beacon Triangle class Lifting system
Bar VL/1 1.25 m Halogen Class 1 Manual
Bar VL/2 1.25 m Halogen Class 1 Electric¹
Bar VL/3 1.25 m Halogen Class 2 Manual
Bar VL/4 1.25 m Halogen Class 2 Electric¹
Bar VL/5 1.25 m Rotating LED Class 1 Manual
Bar VL/6 1.25 m Rotating LED Class 1 Electric¹
Bar VL/7 1.25 m Rotating LED Class 2 Manual
Bar VL/8 1.25 m Rotating LED Class 2 Electric¹
Bar VL/9 1.25 m Flashing LED Class 1 Manual
Bar VL/10 1.25 m Flashing LED Class 1 Electric¹
Bar VL/11 1.25 m Flashing LED Class 2 Manual
Bar VL/12 1.25 m Flashing LED Class 2 Electric¹
Bar VU/1 1.25 m Halogen Class 1 Manual
Bar VU/2 1.6 m Halogen Class 1 Electric¹
Bar VU/3 1.6 m Halogen Class 2 Manual
Bar VU/4 1.6 m Halogen Class 2 Electric¹
Bar VU/5 1.6 m Rotating LED Class 1 Manual
Bar VU/6 1.6 m Rotating LED Class 1 Electric¹
Bar VU/7 1.6 m Rotating LED Class 2 Manual
Bar VU/8 1.6 m Rotating LED Class 2 Electric¹
Bar VU/9 1.6 m Flashing LED Class 1 Manual
Bar VU/10 1.6 m Flashing LED Class 1 Electric¹
Bar VU/11 1.6 m Flashing LED Class 2 Manual
Bar VU/12 1.6 m Flashing LED Class 2 Electric¹
¹with third point
TRIFLASH ON ADHESIVE BARS
Trifl
ash
Equ
ippe
d ba
rs
2017
Phone : +33 (0)4 72 917 917 - Fax : +33 (0)4 72 917 918 - Email : [email protected] - Web site : www.sesaly.com 13Do not hesitate to contact us for any other specific request !
Reference Vehicle gutter fixingsS 51 Fixings < 15 cm
S 55 Fixings from 25 cm to 32 cm
S 52 Fixings from 34 cm to 50 cm
S 53 Fixings from 58 cm to 70 cm
Reference Universal fixingsS 54 Direct roof fixing kit (drilled)
S 90 Adhesive fixings
Bar only ReferenceBar length 110 cm S 110 LP
Bar length 125 cm S 125 LP
Bar length 135 cm S 135 LP
Bar length 150 cm S 150 LP
Bar length 160 cm S 160 LP
Bar length 170 cm S 170 LP
Bar length 180 cm S 180 LP
Bar length 190 cm S 190 LP
Bar length 200 cm S 200 LP
Bar length 220 cm S 220 LP
Vehicle Bar FixingIveco Daily Cab or Tipper S 170 S 59
FORD Transit Connect 2013 S 135 S 86
MERCEDES Sprinter S 150 S 76
VOLKSWAGEN Transporter S 150 S 76
The third adhesive or magnetic point (to be positioned under the head of the lifting point to recover the height of the universal bar).
Reference Designation
T.3M Magnetic 3rd point
T.3C Adhesive 3rd point
Tip! The 3rd point
To order your bar assembly, just state:
1. Vehicle brand and model (van, cab, etc.)2. Year the vehicle was first registered3. Fixing type (drilled, adhesive or dedicated vehicle fixing)4. Choice of equipment: triangle, LED beacons (rotating or flashing Satelight ...)
TRIFLASH ON DEDICATED* BARS*Dédicated to vehicles
We can
manufacture
dedicated bars
for any vehicle
on demand
Phone : +33 (0)4 72 917 917 - Fax : +33 (0)4 72 917 918 - Email : [email protected] - Web site : www.sesaly.com14
2017
BEACONS
LED Beacons : SATELIGHT 15
XL LED Beacons : SATELIGHT XL 17
Halogen Beacons 18
Pole mounting connectors 19
Do not hesitate to contact us for any other specific request !Phone : +33 (0)4 72 917 917 - Fax : +33 (0)4 72 917 918 - Email : [email protected] - Web site : www.sesaly.com 15
Bea
cons
2017
S A T E L I G H TLED
Fixing Characteristics Dimensions ORANGE BLUE
3 points ►ISO standard base
Central Bolt
►Quicker mounting because only 1 hole needed on the vehicle►The power leads pass through the M12 bolt
Pole mounting
►Better fixing system performance than a wing nut►Clamp ring locking system on pole mounting connector
Flexible pole mounting
►Shock absorbing flexible base
Magnetic
►Magnetic base, no need to drill, retained at 200 km/h = 124 mph►Flexible cable with cigar lighter plug and switch
Base
►Stackable, accessory enabling you to get a beason as high as required
Protective Grill ► Protect SATELIGHTagainst chocs
LED BEACONS ROTATING OR FLASHING
YearsGarantee
Phone : +33 (0)4 72 917 917 - Fax : +33 (0)4 72 917 918 - Email : [email protected] - Web site : www.sesaly.com16
2017
S A T E L I G H TLED
Fixing Colour R 65 Reference
R 65 Reference
ICAO Reference
3 points (1) Orange GL 100.OR FL 100.OR FL 300.OR
3 points (1) Blue GL 100.B FL 100.B FL 300.B
Central bolt (2) Orange GL 101.OR FL 101.OR FL 301.OR
Central bolt (2) Blue GL 101.B FL 101.B FL 301.B
Pole mounting (3) Orange GL 102.OR FL 102.OR FL 302.OR
Pole mounting (3) Blue GL 102.B FL 102.B FL 302.B
Flexible pole mounting (4) Orange GL 105.OR FL 105.OR FL 305.OR
Flexible pole mounting (4) Blue GL 105.B FL 105.B FL 305.B
Magnetic (5) Orange GL 104.OR FL 104.OR FL 304.OR
Magnetic (5) Blue GL 104.B FL 104.B FL 304.B
SATELIGHT Base ** (6) Black EMB SATELIGHT EMB SATELIGHT EMB SATELIGHT
SATELIGHT Grill (page 15) GP SATELIGHT GP SATELIGHT GP SATELIGHT
12/2410-30 Vdc
Vdc
LED x8▷▶▶
12 Vdc - 1.1 A24 Vdc - 0.5 A
A EMC2009/19/CE-30° / +50°PC IP 66
R 65ICAO*130
+/- 10
Flashes/minRevs/min
SATELIGHT R65 is also available in red & green. Please contact us if you need any code.
YearsGarantee
LED BEACONS ROTATING OR FLASHING
Rotating Flashing
* ICAO references meet ICAO Annex 14 for Aerodromes vol I. July 2013 specifications** SATELIGHT BASE is an accessory only for 3 points versions
New : ICAO* BEACONS FOR AIRPORTS !
TIP !
You can use the SATELIGHT base to obtain the required beacon height you need ...
The SATELIGHT base is stackable !
→
(6)
(1) (2) (3)(5)
(4)
(1)
(6)
Do not hesitate to contact us for any other specific request !Phone : +33 (0)4 72 917 917 - Fax : +33 (0)4 72 917 918 - Email : [email protected] - Web site : www.sesaly.com 17
Bea
cons
2017
S A T E L I G H T X LLED
12/2410-30 Vdc
Vdc
LED x8▷▶▶
12 Vdc - 1.1 A24 Vdc - 0.5 A
A EMC2009/19/CE-30° / +50° IP 66
Fixing Colour
R65 Reference
R 65 Reference
ICAO Reference
3 points (1) Orange GLXL 100.OR FLXL 100.OR FLXL 300.OR
3 points (1) Blue GLXL 100.B FLXL 100.B FLXL 300.B
Central bolt (2) Orange GLXL 101.OR FLXL 101.OR FLXL 301.OR
Central bolt (2) Blue GLXL 101.B FLXL 101.B FLXL 301.B
Pole mounting (3) Orange GLXL 102.OR FLXL 102.OR FLXL 302.OR
Pole mounting (3) Blue GLXL 102.B FLXL 102.B FLXL 302.B
Flexible pole mounting (4) Orange GLXL 105.OR FLXL 105.OR FLXL 305.OR
Flexible pole mounting (4) Blue GLXL 105.B FLXL 105.B FLXL 305.B
Magnetic (5) Orange GLXL104.OR FLXL104.OR FLXL 304.OR
Magnetic (5) Blue GLXL 104.B FLXL 104.B FLXL 304.B
SATELIGHT Base** (6) Black EMB SATELIGHT EMB SATELIGHT EMB SATELIGHT
PC130+/- 10
Flashes/minRevs/min
LED BEACONS ROTATING OR FLASHING
Rotating Flashing
YearsGarantee
TIP !
You can use the SATELIGHT base to obtain the required beacon height you need ...
The SATELIGHT base is stackable !
R 65ICAO*
New : ICAO* BEACONS FOR AIRPORTS !
→
(1)
(1)
(2) (3) (4)
(6)
(6)
SATELIGHT R65 is also available in red & green. Please contact us if you need any code.
* ICAO references meet ICAO Annex 14 for Aerodromes vol I. July 2013 specifications** SATELIGHT BASE is an accessory only for 3 points versions
(5)
Phone : +33 (0)4 72 917 917 - Fax : +33 (0)4 72 917 918 - Email : [email protected] - Web site : www.sesaly.com18
2017
BR 390HALOGEN
EUROROTHALOGEN
Fixing Colour Dimensionsmm (H x Ø)
Ref.12 Vwithout bulb
Ref.12 Vwith bulb
Ref.24 Vwith bulb
3 points Orange 179 x 153 BR 390.00 BR 390.00.12 BR 390.00.24
3 points Blue 179 x 153 BR 390.01 BR 390.01.12 BR 390.01.24
3 points Red 179 x 153 BR 390.02 BR 390.02.12 BR 390.02.24
Pole mounting Orange 236 x 149 BR 392.00 BR 392.00.12 BR 392.00.24
Pole mounting Blue 236 x 149 BR 392.01 BR 392.01.12 BR 392.01.24
Pole mounting Red 236 x 149 BR 392.02 BR 392.02.12 BR 392.02.24
Flexible pole mounting Orange 290 x 149 BR 395.00 BR 395.00.12 BR 395.00.24
Magnetic Orange 182 x 155 BR 394.00 BR 394.00.12 BR 394.00.24
Magnetic Blue 182 x 155 BR 394.01 BR 394.01.12 BR 394.01.24
Magnetic Red 182 x 155 BR 394.02 BR 394.02.12 BR 394.02.24
Fixing Colour Dimensionsmm (H x Ø) Réf. 12 V Réf. 24 V
3 points Orange 120 x 148 NE EURO/P12 NE EURO/P24
Central bolt Orange 163 x 116 NE EURO/B12 NE EURO/B24
Pole mounting Orange 162 x 116 NE EURO/H12 NE EURO/H24
Flexible pole mounting Orange 188 x 116 NE EURO/HF12 NE EURO/HF24
Magnetic Orange 142 x 116 NE EURO/M12 NE EURO/M24
Magnetic + sucker Orange 155 x 116 NE EURO/MV12 NE EURO/MV24
All our halogen magnetic fixing revolving lights are delivered with a cigar lighter plug
All our halogen magnetic fixing revolving lights are delivered with a cigar lighter plug
Protective grill option – Ref. GP
12/2410-30 Vdc
Vdc
12 Vdc - 4.6 A24 Vdc - 3.0 A
AEMC
R 65IP 56PC
LENS
Cabochon
12/2410-30 Vdc
Vdc
12 Vdc - 1.8 A24 Vdc - 1.0 A
AEMCR 65 IP 56PC21 W -30° / +50°
OrangeBlue
HALOGEN BEACONS ROTATING OR FLASHING
3 points Magnetic 3 points + GP Pole mounting FlexiblePole mounting
3 points Pole mounting FlexiblePole mounting
Central bolt Magnetic Magnetic & sucker
Do not hesitate to contact us for any other specific request !Phone : +33 (0)4 72 917 917 - Fax : +33 (0)4 72 917 918 - Email : [email protected] - Web site : www.sesaly.com 19
Bea
cons
2017
GDO - MagneticHALOGEN
Fixing Colour Dimensionsmm (LxWxH)
Ref.12 Vwithout bulb
Magnetic Orange 175 x 118 x 140 GDO12
Magnetic Blue 175 x 118 x 140 GDB12
All our halogen magnetic fixing beacons are delivered with a cigar lighter plug
12Vdc
EMCR 6555 WA
4.58
POLE MOUNTING CONNECTORS
Fixing Dimensionsmm (H x Ø) Characteristics Reference
Welded 100 x 24 Watertight cap BR 13109.00
Bolted 100 x 24 Thread 450 mm – Nut, backnut Watertight cap BR 13109.50
Offset 100 x 24 Hole spacing 40 mm – Offset 85 mm Watertight cap BR 13109.60
For screwed fittings 100 x 24 Hole spacing 85 mm Watertight cap BR 13109.70
Cable extends 1.5 m
Phone : +33 (0)4 72 917 917 - Fax : +33 (0)4 72 917 918 - Email : [email protected] - Web site : www.sesaly.com20
2017
LIGHTBARS
Megaflash Double Stack Orange Lightbar 21
Scrolling lightbar 23
Programmed message panels 24Scrolling lightbars (Master / slave) 25
Marking for construction site, highway, breakdown vehicles, abnormal loads, agricultural vehicles, etc.
Marking for emergency or works vehicles
Marking for construction site vehicles or temporary hazards
Phone : +33 (0)4 72 917 917 - Fax : +33 (0)4 72 917 918 - Email : [email protected] - Web site : www.sesaly.com 21
Ligh
tbar
s
Do not hesitate to contact us for any other specific request !
2017
LIGHTBARMEGAFLASH DOUBLE STACK
- CREE light output power LED- 2 or 4 TORNADO® LED modules- FLASHING or ROTATING version- ECE R65 class 1 type approved in orange- Available in ECE R65 class 2 type approved blue- Patented FX® lens- UV resistant treated polycarbonate cover- Dual voltage 10-30 Vdc- 5-year guarantee- Possible lengths: 550 mm / 830 mm /1110 mm/ 1390 mm/ 1670 mm/1950 mm- Depth 320 mm – height 90 mm – Height with fixings: 130 mm- Complies to CEM (Electro-Magnetic Compatibility)
These lightbars are delivered with a 5 metre electric harness.They are composed of a UV resistant treated polycarbonate covers & universal fixing lugs
They are infinitely modular according to your needs. See the next page to make your choice.
Our basic lightbars are delivered with orange upper covers and orange lower covers.If you choose options such as “scrolling arrow”, “side lights”, these functions will be positioned on the lower level. The lower covers will this be crystal.
Marking for service, construction site, road, breakdown vehicles, etc.
ECE
Reference Length (mm) Number of modules Rotating Flashing
RE.DS1.122.111 1110 2 Yes No
RE.DS2.122.111 1110 4 Yes No
RE.DS3.122.111 1110 2 No Yes
RE.DS4.122.111 1110 4 No Yes
RE.DS1.122.139 1390 2 Yes No
RE.DS2.122.139 1390 4 Yes No
RE.DS3.122.139 1390 2 No Yes
RE.DS4.122.139 1390 4 No Yes
R 65
Phone : +33 (0)4 72 917 917 - Fax : +33 (0)4 72 917 918 - Email : [email protected] - Web site : www.sesaly.com22
2017
Reference Technical Description
RE OPT DS CCB WHITE CENTRAL COVER
RE OPT DS CCLB WHITE CENTRAL COVER WITH LED LIGHTING
RE OPT DS MARQ TEXT OF YOUR CHOICE
RE OPT DS AL LED SIDE LIGHTS – ALLEY LIGHT – WORK ZONE LIGHTINGIntegrated into the lightbar
RE OPT DS FL LED FRONT SPOTLIGHTS – FRONT LIGHTIntegrated into the lightbar
RE OPT DS RL LED REAR SPOTLIGHTS – REAR LIGHTIntegrated into the lightbar
RE OPT DS SC FLASHING STOP FUNCTION REPEATERS
RE OPT DS HP LOUDSPEAKER + GRILL
RE OPT DS PA PUBLIC ADDRESS - MICROPHONE
RE OPT DS TD66 LED LIGHTS TRAFFIC DIRECTOR – REINFORCED BEACONS TO DIRECT TRAFFIC LEFT RIGHT SCROLLING/ RIGHT LEFT SCROLLING / WARNINGIntegrated into the lightbar
RE OPT DS TD88 LED LIGHTS TRAFFIC DIRECTOR – REINFORCED BEACONS TO DIRECT TRAFFIC LEFT RIGHT SCROLLING/ RIGHT LEFT SCROLLING / WARNINGIntegrated into the lightbar
RE OPT DS CT12 12-WAY ROOF CONNECTOR
RE OPT DS MAG MAGNETIC FIXINGS – TESTED BY TUV Germany at 235 KM/H = 146 miles / hour
RE OPT DS VEN SUCKER FIXINGS
RE OPT DS C10M 10 METRE ELECTRIC HARNESS
Configure your lightbar on request by adding your desired options.
BREAKDOWN
BREAKDOWN
OPTIONS for MEGAFLASHLIGHTBAR Double Stack Orange
Phone : +33 (0)4 72 917 917 - Fax : +33 (0)4 72 917 918 - Email : [email protected] - Web site : www.sesaly.com 23
Ligh
tbar
s
Do not hesitate to contact us for any other specific request !
2017
S C R O L L I N G U N I T
For LED scrolling: ASNC – 12 Vdc
Characteristics:- 4 available modes: scrolling right to left, left to right, centre to edges, warning- Can be slaved to the flash mode- Day/night mode- 2 speeds- An auxiliary button for, for example, controlling beaconsRef. ASNC.12V
Voltage Dimension (mm) Version Reference
12 V 1500 x 110 x 69 halogen ARROW.12V
24 V 1500 x 110 x 69 halogen ARROW.24V
12 V 1500 x 45 x 70 LED AS1060LED.12V
ARROWSTICK LED SCROLLING LIGHTBAR
Characteristics:- 8 LED modules- Lightbar delivered with ASNC.12V scrolling unit - 2 lengths available: 1000 mm lightbar with 10 m cable 1200 mm lightbar with 10 m cable
Voltage Dimension (mm) Reference
12 V 1000 x 45 x 70 AS839LEDG2.12V
12 V 1200 x 45 x 70 AS847LEDG2.12V
24 V 1000 x 45 x 70 AS839LEDG2.24V
24 V 1200 x 45 x 70 AS847LEDG2.24V
ARROWSTICK SCROLLING ARROW LIGHTBAR
Characteristics:- 10 LED or halogen modules- 1 length available: 1500 mm lightbar with 5 m cable- LED lightbar version delivered with ASNC.12V scrolling unit- Halogen lightbar version delivered with ASBC scrolling unit
LED ARROWHalogen ARROW
Marking for emergency or works vehicles
I N T E G R A T E D S C R O L L I N G
SCROLLING LIGHTBARS
Phone : +33 (0)4 72 917 917 - Fax : +33 (0)4 72 917 918 - Email : [email protected] - Web site : www.sesaly.com24
2017
Marking slow moving vehicles, mobile construction sites
Message Dimension Voltage Reference
Balayage-Danger
Depth 85 mm
Height 170 mm
Length 705 mm
24 Vdc ¹ PMP.BD
Collecte-Danger 24 Vdc¹ PMP.CD
30 km/h Danger 24 Vdc¹ PMP.D30
Patience-Collecte 24 Vdc¹ PMP.PC
FACTORY PROGRAMMED TEXT OF YOUR CHOICE WITH MAXIMUM 8 CHARACTERS
Characteristics:- Amber LED- Low power consumption- Simple to use- No programming- No control unit- Metal housing – Epoxy paint- IP 68 resin coated electronics- Automatic day/night switching- Other texts available on request
PROGRAMMED MESSAGE PANELPMP
Message Dimension Voltage Reference
Collecte-Danger + 8 left arrowsDepth 85 mmHeight 170 mmLength 1505 mm
24 Vdc¹ PMP.CD.FG
Collecte-Danger + SID.L scrolling modules 24 Vdc¹ PMP.CD.SIDL
1 12 V version available on request
MESSAGE PANELS
Phone : +33 (0)4 72 917 917 - Fax : +33 (0)4 72 917 918 - Email : [email protected] - Web site : www.sesaly.com 25
Ligh
tbar
s
Do not hesitate to contact us for any other specific request !
2017
Marking of construction vehicles or temporary hazards
SCROLLING LIGHTBARS (MASTER / SLAVE)SIDL
Description:Set comprising 2 modules each with 4 flashing amber LED lights each.Each unit lights successively from inside to outside(or scroll from outside to inside by simple rotation of the front panels)
Kit composition:1 module with 4 lights with incorporated scrolling centre light (Master)1 module with 4 lights (Slave)A 2-way cable 3 m long for power supplyA 6-way cable 3.5 m long for connection between modules
Characteristics:- Anti-corrosion treated body – Black Epoxy paint- Cables exits through cable glands- Screw terminal connections in modules- Fixing by 2 M5 screws on top (spacing 260 mm) and/or M5 screws on side- IP 68 resin coated electronics- Automatic day/night switching- Module weight: 3.4 kg
Dimensions:Module: 400 mm x 85 mm x 170 mm
Reference Designation Voltage
SIDL.C Double body LED scrolling module 12/24 Vdc
SIDL.FLECHE Double body LED scrolling module Chevrons 12/24 Vdc
Phone : +33 (0)4 72 917 917 - Fax : +33 (0)4 72 917 918 - Email : [email protected] - Web site : www.sesaly.com26
2017
AUDIBLE SOLUTIONS
Priority warnings 27
Reversing alarms 28
Phone : +33 (0)4 72 917 917 - Fax : +33 (0)4 72 917 918 - Email : [email protected] - Web site : www.sesaly.com 27
Aud
ible
Do not hesitate to contact us for any other specific request !
2017
S I R E N + L O U D S P E A K E R
For priority vehicles
Characteristics:- 12 Vdc- IP66- Choice of 5 tones: Police, Gendarmerie, Fire brigade, MMU (Mobile Medical Unit) or Ambulances- Dimensions: 30 mm x 71 mm x 90 mm- Weight: 200 g
Homologation UTACPolice KE S.POL
Gendarmerie KE S.GEN
Fire brigade KE S.POM
MMU KE S.UMH
Ambulances KE S.AMB
S I R E N + P U B L I C A D R E S S
For priority vehicles
Characteristics:- 12 Vdc or 24 Vdc- Choice of 5 tones: Police, Gendarmerie, Fire brigade, MMU (Mobile Medical Unit) or Ambulances- Dimensions: 170 mm x 104 mm x 60 mm
Specify the tone on ordering
UTAC type approval
12 Vdc BR S4000.PA.12V
24 Vdc BR S4000.PA.24V
PRIORITY WARNINGS
Phone : +33 (0)4 72 917 917 - Fax : +33 (0)4 72 917 918 - Email : [email protected] - Web site : www.sesaly.com28
2017
Developed for the new generation of electric vehiclesDesigned and manufactured by SESALY – France
A U D I B L E R E V E R S I N G A L A R M S
U R B A N M I N I W A R N I N GA1S
Characteristics:
2 urban warnings in 1 ► Choice of “gong” or “bell” sound + reversing alarm functionDepending on selected version, the sound power varies from 80 to 110 dB at 1 metre - 12 Vdc or 24 Vdc- Bracket fixing- Day / night function- IP56 Waterproof loudspeaker in black PA6- Cable: 200 mm – Tyco Superseal connectors ► Other connectors on request- Dimensions: 73 mm x 72 mm x 60 mm- Power consumption: 2 A at 12 V and 1.2 A at 24 V- Weight: 270 g
Type Approval: EMC 2009/19/CECEM 2009/19/CE
Reference 12 V Reference 24 V Designation
A1S.10 A1S.02 “Gong” warning sound + buzzer
SESALY has other references in stock. Please contact us.
Reference Picture Voltage dB level Designation IP Connection
BRI SA BBS 97 (1) 12/24 Vdc 77 dB à 97 dB Mixed frequency audible reversing alarm IP 68 1 m wire
BSR 8638 (2) 12/24 Vdc 77 dB - 102 dB Audible reversing alarm IP 67 AMP FI/FO
BSR678D.124 (3) 12 Vdc to 48 Vdc 77 dB à 97 dB Audible reversing alarm IP 67 2 screws
BSR678.124 (4) 12 Vdc to 48 Vdc 97 dB Audible reversing alarm IP 67 2 screws
BSRAV.124 (5) 12/24 Vdc 97 dB Audible reversing alarm IP 67 2 m cable
(1) (2) (3) (4) (5)
REVERSING ALARMS
Phone : +33 (0)4 72 917 917 - Fax : +33 (0)4 72 917 918 - Email : [email protected] - Web site : www.sesaly.com 29
Aud
ible
Do not hesitate to contact us for any other specific request !
2017
R E V E R S I N G S O U N D B U L B
I N T E R M I T T E N T M I C R O A L A R MBSR
I N T E R M I T T E N T M I C R O A L A R MBSD
Characteristics:- 12/24 V or 24 V alternating or direct current - Intermittent micro alarm for outside use: shock resistant, compact and waterproof- Very high sound quality- Small dimensions- Low power consumption- Cable: 220 mm- Ingress protection: IP 67- Weight: 57 g
Mounting directly on body (Ø32 mm cut-out) or using a bracket:- Spacing 84 mm: Reference BSR 13/31- Spacing 19 mm: Reference BSR 13/32
Applications: Agricultural equipment, construction plant, cranes, lorries, vans, buses.
Characteristics:- 12/24 Vdc or 24 Vdc- Intermittent micro alarm for outside use: shock resistant, compact and waterproof- Cable: 200 mm- Ingress protection: IP 67- Weight: 25 g
Characteristics:- 12/24 Vdc or 24 Vdc- Current consumption: 1.2 A- BA15S base
Reference without bracket
Reference with 13/31 bracket Picture Reference with
13/32 bracket Picture dB level Designation
BSR 24 BSR 24/31 (1) BSR 24/32 (2) 100 dB 24 Vdc micro alarm
BSR 124 BSR 124/31 (1) BSR 124/32 (2) 100 dB 12/24 Vdc micro alarm
BSR87 124 BSR87 124/31 (1) BSR87 124/32 (2) 87 dB 12/24 Vdc micro alarm
Reference 12 Vdc Reference 24 Vdc dB level Designation
BSD 12 BSD 24 92 dB Micro alarm
Reference 12 Vdc Reference 24 Vdc dB level Designation
BACK UP ALARM BACK UP ALARM 24V 86 dB Reversing sound bulb
(2)
REVERSING ALARMS
(1)
Phone : +33 (0)4 72 917 917 - Fax : +33 (0)4 72 917 918 - Email : [email protected] - Web site : www.sesaly.com30
2017
EXTERIOR LIGHTS
Work lights 31
Motorised spot lights 33
Side spot lights 34
Additional exterior lights 35
Phone : +33 (0)4 72 917 917 - Fax : +33 (0)4 72 917 918 - Email : [email protected] - Web site : www.sesaly.com 31
Ext
erio
r Lig
hts
Do not hesitate to contact us for any other specific request !
2017
B E L I G H TLED Designed and manufactured by SESALY - France
The BELIGHT successfully passed the photobiological safety test to standard NF EN 62471 “Photobiologi-cal safety of lights and light systems”The BELIGHT belongs to risk group 0: Risk free
LED x2▷▶▶
Warm White
*Resists high pressure washing
EMC2009/19/CE
Lux1 m
75
lm2000
60°
Adjustable
Hr> 20.000
IP 66*-40° / +70°
Vdc12/48
12 Vdc - 2.6 A24 Vdc - 1.3 A
BodyAluminium
BoltedReference Colour Dimensions mm (HxLxD) Designation
BELIGHT.OR Amber 98 x 139 x 78 LED worklight
BELIGHT.CR Crystal 98 x 139 x 78 LED worklight
ProtectiveglassPC
ProtectiveglassPC
WORK LIGHTS
Phone : +33 (0)4 72 917 917 - Fax : +33 (0)4 72 917 918 - Email : [email protected] - Web site : www.sesaly.com32
2017
M I N I L I G H TLED
With or without switch
◄
◄
◄
◄
111 mm
84 mm
Reference Designation
MINILIGHT.CR 4 LED work light - Crystal
MINILIGHT.CR/I 4 LED work light – Crystal – With switch
MINILIGHT.CR/MAG 4 LED work light – Crystal – With switch 2000 mm straight cable + cigar lighter plug – Red switch on light Magnet: Adhesion force 40 kg
Characteristics: - 12/24 Vdc (10-30 Vdc)- Warm white LED- Polycarbonate protective glass- Aluminium body- Adjustable- Operating temperature: -30˚C / + 65˚C- IP67- EMC- 4 LED- 700 lumen
WORK LIGHTS
Phone : +33 (0)4 72 917 917 - Fax : +33 (0)4 72 917 918 - Email : [email protected] - Web site : www.sesaly.com 33
Ext
erio
r Lig
hts
Do not hesitate to contact us for any other specific request !
2017
Reference Fixing Designation
POT 12 (1) Sucker Adjustable light with white plastic optics
POT 14 (2) Wireless magnetic Adjustable light with white glass optics – plastic grill
(1) (2)
Characteristics:- On/Off function- Sucker or magnetic fixing- Polyethylene fixed base for both versions- ABS body- Remote control with On/Off indicator light- Halogen bulb gives 400 m range with standard beam 55 W – 4.2 A- Horizontal angle: 7˚ - Vertical angle 4˚- Top/bottom inclination 75˚- Rotation 440˚- 2 motors (consumption 0.4 A per motor)- 3 m power supply cable with cigar lighter plug
HALOGEN S P O T L I G H T S
SPOTLIGHTS MOTORISED ADJUSTABLE
Phone : +33 (0)4 72 917 917 - Fax : +33 (0)4 72 917 918 - Email : [email protected] - Web site : www.sesaly.com34
2017
O U T D O O R L I G H T I N GLED
LED x3▷▶▶
ECE R10 0412 Vdc - 0.35 A
24 Vdc - 0.20 A
AAl
Body
12/2410-30 Vdc
Vdc
IP 69K
Characteristics: - 3 “natural white” power LED- Black aluminium body- 1.5 mm seal on rear face- 1500 mm 2 ways cable
Ideal for your work area
Reference Dimensions mm (L x H x D) Designation
EL.3PL 125.5 x 42.5 x 31.5 Surface mounted LED outdoor light
4250°K4750°K 20°
LED M I N I F L E D
Characteristics: - Flashing LED light available in colours: orange, red, green, crystal or blue- Height: 60 mm – Ø 76 mm- Fixing separation: 56 mm (2 screws M5 x 15)- Synchronisation of 2 to 6 MINIFLED- Flash frequency: 60 flashes / min- Power consumption: 0.016 A at 12 V and 0.02 A at 24 V- Ingress protection IP 68- EMC 2009/19/CE
Reference Colour Designation
MINIFLED.OR Orange Orange LED flashing light
MINIFLED.R Red Red LED flashing light
MINIFLED.V Green Green LED flashing light
MINIFLED.CR Crystal Crystal LED flashing light
MINIFLED.B Blue Blue LED flashing light
Optional bracket – Ref. EQ/MINIFL
M I N I F L E D
FLOODLIGHTS
EXTERIOR LIGHTS Ø 76
Phone : +33 (0)4 72 917 917 - Fax : +33 (0)4 72 917 918 - Email : [email protected] - Web site : www.sesaly.com 35
Ext
erio
r Lig
hts
Do not hesitate to contact us for any other specific request !
2017
Characteristics: - LED stroboscopic light with integrated flashing unit- Dual voltage 12/24 Vdc- Triple flash – 160 cycles / minute- Double sided adhesive mounted- PMMA body and lens- 30,000 hours lifetime
4 LED oval version – Current consumption 170 mA at 12 Vdc / 85 mA at 24 Vdc6 LED rectangular version - Current consumption 330 mA at 12 Vdc / 165 mA at 24 Vdc
Characteristics:- Flash frequency: 90 flashes / min- EMC 2006/28/CEOnly the master lights can control the slave lights
Reference Colour Designation
SA SBEF 4 Y Orange
4 LED stroboscopic light - Oval SA SBEF 4 R Red
SA SBEF 4 B Blue
SA SBDF 6 Y Orange
6 LED stroboscopic light - Rectangular SA SBDF 6 R Red
SA SBDF 6 B Blue
Reference Colour Designation
MINILEDS OR/C Orange Single LED flashing light - master
MINILEDS OR/F Orange Single LED flashing light - slave
MINILEDS OR KIT2 Orange 2 LED flashing lights – 1 master + 1 slave
MINILEDS OR KIT2 3C Orange 2 LED flashing lights – 1 master + 1 slave - 3 m cable
LED M I N I L E D
LED STROBOSCOPIC LIGHTS ADHESIVE
EXTERIOR LIGHTS Ø 76
Phone : +33 (0)4 72 917 917 - Fax : +33 (0)4 72 917 918 - Email : [email protected] - Web site : www.sesaly.comPhone : +33 (0)4 72 917 917 - Fax : +33 (0)4 72 917 918 - Email : [email protected] - Web site : www.sesaly.com36
2017
LED M A X I 2 0 0
Common characteristics: - Light equipped with 104 LEDs resin coated- Black ABS body- Anti-reflection glass- Very low current consumption: less than 0.2 A- Light output: 370 lux at 1 m on axis for an amber coloured Ø 200 mm light (95 lux at 2 m)- Life greater than 100,000 hours *- IP 68 ingress protection- Fixings for surface mounting either with M5 screws or with M6 HH screws- Power cable: 3 metres- EMC 2006/28/CE
Reference Colour Function Voltage Characteristics
MAXI200 OR/FL Amber Flash / Double Flash 12/24 Vdc Synchronisable lightsFunction change with fourth wireElectronic unit incorporatedAutomatic day/night switching
MAXI200 OR/CF Amber Fixed / Flashing 12/24 Vdc
MAXI200 OR/12 Amber Fixed 12 Vdc
This light can be used in fixed mode or controlled by an external unit (scrolling or flashing)
MAXI200 OR/24 Amber Fixed 24 Vdc
MAXI200 R/12 Red Fixed 12 Vdc
MAXI200 R/24 Red Fixed 24 Vdc
MAXI200 V/24 Green Fixed 24 Vdc
MAXI200 SI/24 No Entry Fixed 24 Vdc
MAXIS200 OR Amber Fixed 220 Vac
MAXIS200 R Red Fixed 220 Vac
MAXIS200 V Green Fixed 220 Vac
MAXIS200 R5/2F Red Double Flash 220 Vac
MAXIS200 W/2F White Double Flash 220 Vac
* Light output decreases by 30% after 100,000 hours
EXTERIOR LIGHTS Ø 200
Phone : +33 (0)4 72 917 917 - Fax : +33 (0)4 72 917 918 - Email : [email protected] - Web site : www.sesaly.com 37
Roo
f Lig
hts
Do not hesitate to contact us for any other specific request !
2017
Phone : +33 (0)4 72 917 917 - Fax : +33 (0)4 72 917 918 - Email : [email protected] - Web site : www.sesaly.com
Characteristics: - Light grey body- Height: 140 mm- Thickness: 56 mm- Fixing spacing: 30 mm (by 2 M4 screws)- The F75 can also be fixed by M10x45 hollow studding (on request)
2 versions:- Unidirectional version: 1 opaque cover and 1 orange coverUnidirectional light available with internal reflector to increase the light intensity.- Bidirectional version – E2 type approved: type F75 1 PE2 for P25.1 21 W bulbdouble sided orange – type approval 1 -4 – 5 E2 front & side flashing
Complete unidirectional lights
Reference Designation
F 751PREFOR Complete light + reflector - Orange
F 751PREFB Complete light + reflector - Blue
Complete lights with incorporated electronic unit
Reference Designation
CPP_275N1O Bidirectional - Without reflector
CPP_275R1O Bidirectional - With reflector
Complete bidirectional lights
Reference Designation
F751POR For P25.1 – 21 W bulb – standard model
F751PE200 For P25.1 – 21 W bulb – type approved model
F75H1OR For H1 iodine bulb – Orange
F75H1B For H1 iodine bulb – Blue
F 7 5HALOGEN
Bulb not supplied
EXTERIOR LIGHTS F75
Phone : +33 (0)4 72 917 917 - Fax : +33 (0)4 72 917 918 - Email : [email protected] - Web site : www.sesaly.com38
2017
CEILING LIGHTS
Surface mounted 39
Marker lights 41
Phone : +33 (0)4 72 917 917 - Fax : +33 (0)4 72 917 918 - Email : [email protected] - Web site : www.sesaly.com 39Do not hesitate to contact us for any other specific request !
2017
Cei
ling
light
s
LED SURFACE MOUNTED CEILING LIGHTS 9/32V
Characteristics of linear versions: - Surface mounted ceiling light equipped with 24 “warm white” or “cool white” LEDs- UV resistant treated polycarbonate body- Model with red LED touch switch for “warm white” ceiling light- Model with blue LED touch switch for “cool white” ceiling light- Model without switch- Dimensions: 270 mm x 40 mm x 8 mm- Current consumption: 0.6 A- Ingress protection: IP 67- Light output: • 187 lux at 1 m on axis
• 47 lux at 1 m over 3.5 m diameter • 47 lux at 2 m on axis• 12 lux at 2 m on 7 m diameter
Characteristics of circular versions: - Surface mounted ceiling light equipped with 36 “warm white” or “cool white” LEDs- UV resistant treated polycarbonate body- Model with red LED or blue touch switch for “warm white” ceiling light- Model without switch- Diameter: 165 mm- Height: 10 mm- Current consumption: 0.7 A- Ingress protection: IP 67- Light output: • 264 lux at 1 m on axis
• 64 lux at 1 m over 3.6 m diameter • 66 lux at 2 m on axis • 16 lux at 2 m on 7.3 m diameter
Reference Touch switch Designation
FR 7322 Yes “Warm white” surface mounted LED ceiling light
FR 7321 Yes “Cool white” surface mounted LED ceiling light
FR 7320 No “Warm white” surface mounted LED ceiling light
FR 7319 No “Cool white” surface mounted LED ceiling light
Reference Touch switch Designation
FR 7603 Yes “Warm white” surface mounted LED ceiling light
FR 7601 Yes “Cool white” surface mounted LED ceiling light
FR 7602 No “Warm white” surface mounted LED ceiling light
FR 7600 No “Cool white” surface mounted LED ceiling light
Red LED touch switch = warm white
►
Blue LED touch switch = cool white
►
►►
Red L
ED tou
ch switch
Blue
LED tou
ch switch
CEILING LIGHTS ON SURFACE
Phone : +33 (0)4 72 917 917 - Fax : +33 (0)4 72 917 918 - Email : [email protected] - Web site : www.sesaly.com40
2017
LED SURFACE MOUNTED CEILING LIGHTS 12/24V
Characteristics: - Surface mounted ceiling light equipped with 12 “natural white” LEDs- Option: on/off switch- Aluminium body- PC cover- Illumination angle 120˚- 250 lux at 1 metre- Length: 314 mm – Thickness: 20 mm – Width: 40 mm- Ingress protection: IP 54- EMC 2009/19/CE
Reference Length Fixing spacing LED Switch Lumens Consumption
SA SPV4500/I 314 mm 292 mm 12
Yes 600 0.6 A - 12 Vdc
0.3 A - 24 Vdc SA SPV4500 No
Reference Length Switch Consumption
ST 18312 425 mm Yes 0.4 A - 12 Vdc
LED SURFACE MOUNTED CEILING LIGHTS 12V
Characteristics: - Adjustable LED surface mounted ceiling light- Switch- Light output: 180 lux at 1 m on axis- Dimensions: 425 mm x 42 mm x 43 mm- Ingress protection: IP 40
◄ ◄
Adjust
able
CEILING LIGHTS ON SURFACE
Phone : +33 (0)4 72 917 917 - Fax : +33 (0)4 72 917 918 - Email : [email protected] - Web site : www.sesaly.com 41Do not hesitate to contact us for any other specific request !
2017
Cei
ling
light
s
Reference Voltage Designation
FL700.W.W1 24 VdcSurface mounted marker light with 3 white LEDs
FL700.W.W-12 12 Vdc
FL700.W.B1 24 VdcSurface mounted marker light with 3 blue LEDs
FL700.W.B-12 12 Vdc
Reference Colour Voltage Designation
VOY10.CO2B2 Orange
12/24 Vdc
Smooth orange indicator light with ribbed lens
VOY10.CV2B2 Green Smooth green indicator light with ribbed lens
VOY10.CB2B2 Blue Smooth blue indicator light with ribbed lens
VOY10.CC2B2 Crystal Smooth crystal indicator light with ribbed lens
VOY10.CR2B2 Red Smooth red indicator light with ribbed lens
Characteristics:- 12/24 Vdc- Marker light equipped with 3 white or blue LEDs- Polycarbonate body + foam seal- Housing colour: white- Dimensions: 83 mm x 30 mm x 9.1 mm- Fixing spacing: 64.8 mm- Life greater than 30,000 hours
Characteristics:- 12/24 Vdc- 3 “warm white” LEDs- Orange, green, blue, crystal or red cover- Lexan body- Hole diameter 23 mm- Can be mounted on panel from 1 to 10 mm thick- Triple ribbed lens cover- Current consumption 12 Vdc - 0.004 A
24 Vdc - 0.015 A- Directive 95/28/CE
S U R F A C E M O U N T E D M A R K E R L I G H T
W AT E R T I G H T B U I LT I N I N D I C ATO R L I G H T
LED
LED
CEILING LIGHTS ON SURFACE
MARKER LIGHTS
Phone : +33 (0)4 72 917 917 - Fax : +33 (0)4 72 917 918 - Email : [email protected] - Web site : www.sesaly.com42
2017
MARKING FOR LIGHT VEHICLES (L.V.) & UTILITY VEHICLES (U.V.)
Pre-cut kits 43
Striped tape in rolls 43
Phone : +33 (0)4 72 917 917 - Fax : +33 (0)4 72 917 918 - Email : [email protected] - Web site : www.sesaly.com 43
Mar
king
Do not hesitate to contact us for any other specific request !
2017
Pre-cut kits for vehicles
Striped tape in rolls
Characteristics:White retroreflective tape + red screen printing Kit composition:Front tapeRear tape4 tapes 0.56 m x 0.143 m for the right and left parts (2 x 2 tapes)
Class A: - Visibility to 80 metres- Minimum authorised by regulations
Class B level – Microprismatic: - Visibility up to 500 metres- Flexible adhesive microprismatic structure- Easy to fit- Visibility from all angles- Exceptional night visibility- Flexible film with unique ability to conform- No need for varnish or sealing strip- Adhesive provided with channels in the glue allowing air to escape during laying- Certified to standard TPESC 14037
Light Vehicle Kits Reference
Class A KVL1
Class B microprismatic KVL2
Utility Vehicle Kits - Vans Reference
Class A KVU1
Class B microprismatic KVU2
Utility Vehicle Kits - Cabs Reference
Class A KVU1 CABINE
Class B microprismatic KVU2 CABINE
Striped tape in rolls Dimensions CLA Ref. CLB Ref. Microprismatic CLB Ref.2 rolls kit (1 right + 1 left) 45.70 m x 0.14 m 3361/1 3361/2 3361/32 rolls kit (1 right + 1 left) 9 m x 0.14 m 3362/1 3362/2 3362/3
For each vehicle, specify:- The vehicle brand- The exact vehicle model (cab chassis, van, high roof, etc.)- The year the vehicle was registered
U.V. MARKING
Phone : +33 (0)4 72 917 917 - Fax : +33 (0)4 72 917 918 - Email : [email protected] - Web site : www.sesaly.com44
2017
MARKING FOR HEAVY GOODS VEHICLES (H.G.V.)
Safety contour tapes for HGV marking 45
Phone : +33 (0)4 72 917 917 - Fax : +33 (0)4 72 917 918 - Email : [email protected] - Web site : www.sesaly.com 45
Mar
king
Do not hesitate to contact us for any other specific request !
2017
H.G.V. contour safety tapes
Characteristics:- Complies with standard ECE 104- Type approval to 104R 00821- Diamond Grade micro-prismatic film- Visible at over 500 metres- Good wide-angle performance- Easy to fit and customisable cutting- Single layer conformable product, limits tearing and unsticking edges- Special for rigid body- Durability: 5 years
HGV marking Dimensions ReferenceWhite roll 50 m x 55 mm VC 104B (1)
HGV marking Dimensions ReferenceYellow roll 50 m x 55 mm VC 104J (2)
HGV marking Dimensions ReferenceRed roll 50 m x 55 mm VC 104REuropean rear plates Dimensions Reference2 aluminium truck plates 560 mm x 140 mm x 1 mm BEC 2 ALU (3)
European rear plates Dimensions Reference2 aluminium trailer plates 565 mm x 200 mm x 1 mm BEC 2 ALU (4)
(1)
(2)
(3)
(4)
H.G.V. MARKING
Phone : +33 (0)4 72 917 917 - Fax : +33 (0)4 72 917 918 - Email : [email protected] - Web site : www.sesaly.com46
2017
PLATES
“SERVICE” 47
“ARRETS FREQUENTS” 47
“CONVOI EXCEPTIONNEL” 47
Phone : +33 (0)4 72 917 917 - Fax : +33 (0)4 72 917 918 - Email : [email protected] - Web site : www.sesaly.com 47
Mar
king
Do not hesitate to contact us for any other specific request !
2017
“SERVICE” Plates
“ARRÊTS FRÉQUENTS” Plates
“CONVOI EXCEPTIONNEL” Plates
Designation Dimensions ReferenceSERVICE plate – adhesive – CL1 500 mm x 150 mm P.A. SERVICE.CL1SERVICE plate – adhesive – CL2 500 mm x 150 mm P.A. SERVICE.CL2
Designation Dimensions ReferenceSERVICE plate – magnetic – CL1 500 mm x 150 mm P.MAG. SERVICE.CL1SERVICE plate – magnetic – CL2 500 mm x 150 mm P.MAG. SERVICE.CL2
Plates available in dimensions 1000 mm x 300 mm – Contact us
Plates available in dimensions 1000 mm x 300 mm – Contact us
Designation Dimensions Reference“ARRÊTS FRÉQUENTS” plate – adhesive – CL1 500 mm x 150 mm P.A. ARRÊTS F.CL1“ARRÊTS FRÉQUENTS” plate – adhesive – CL2 500 mm x 150 mm P.A. ARRÊTS F.CL2
Designation Dimensions Reference“ARRÊTS FRÉQUENTS” plate – magnetic – CL1 500 mm x 150 mm P.MAG ARRÊTS F.CL1“ARRÊTS FRÉQUENTS” plate – magnetic – CL2 500 mm x 150 mm P.MAG ARRÊTS F.CL2
Designation Dimensions Reference
“CONVOI EXCEPTIONNEL” plateCL2 – text on 2 lines – Single sided 1200 mm x 400 mm x 2 mm CONVOI EX 03 (1)
“CONVOI EXCEPTIONNEL” regulation sheetAuthorised on non-flat surface 1200 mm x 400 mm CONVOI EX 06 (2)
“CONVOI EXCEPTIONNEL” plateCL2 – text on 2 lines – Double sided 1200 mm x 400 mm x 2 mm CONVOI EX 08
“CONVOI EXCEPTIONNEL” platewith hinges and retaining pegs - CL2 1200 mm x 400 mm x 2 mm CONVOI EX/C
“CONVOI EXCEPTIONNEL” adhesive only – CL 1 1200 mm x 400 mm CONVOI EX ADH 1
“CONVOI EXCEPTIONNEL” adhesive only – CL 2 1900 mm x 250 mm CONVOI EX ADH 2 (3)
Maximum speed: 50 km/h
(1)
(2)
(3)
PLATES
Phone : +33 (0)4 72 917 917 - Fax : +33 (0)4 72 917 918 - Email : [email protected] - Web site : www.sesaly.com48
2017
VEHICLE LIGHTS
Multifunction lights 50
Tail lights 51
3rd stop light 51
Licence plate lights 52
Side marker 52
Front indicator 52
Side indicator 52
Outline lights 53
Phone : +33 (0)4 72 917 917 - Fax : +33 (0)4 72 917 918 - Email : [email protected] - Web site : www.sesaly.com 49
Vehi
cle
light
s
Do not hesitate to contact us for any other specific request !
2017
All vehicle lights offered in the following pages are type approved according to the current regulations.
Always note the type approval marking on the lights so as to know the mounting direction.
Always install the lights on a flat surface.
We recommend 1 Nm maximum tightening torque for installing our lights.
For lights equipped with a Gore-Tex membrane provide a space behind this membrane allow the light to breathe properly.
So that the light IP is complete the light must meet the following criteria:
- Mounting with a sealed connector- Connector/cable sealing done with heatshrink sleeve- Tightening torque less than 80 N/cm
To avoid water entry by capillary action all the cabling must be absolutely watertight
Protect the cables against rubbing in passage through sheet surfaces
Do not use corrosive or abrasive cleaning products, petrol or alcohol based products to clean the lights. For preference use cleaning with soapy water and a microfibre cloth.
I N F O R M A T I O N
Phone : +33 (0)4 72 917 917 - Fax : +33 (0)4 72 917 918 - Email : [email protected] - Web site : www.sesaly.com50
2017
LED
LED
M U L T I F U N C T I O N L I G H T S – 2 4 V D C
LED light with 6 functions ► Reflector► Tail ► Stop ► Indicator► Fog ► Reversing
Characteristics:- Polycarbonate cover- Black polycarbonate body- Rear mounting installation by M6 screws or front mounting- Horizontal or vertical mounting- 500 mm cable included- Lifetime greater than 20,000 hours- Operating temperature: - 20 ˚C to + 50 ˚C- Ingress protection: IP 67- Dimensions: 225 mm x 105 mm x 24 mm- Weight: 300 g
Designation Reference6 function LED light F930
C P SP PC SPC B B.C R R.C R.B
Indicator Tail StopTail
TailIndicator
StopTail
Indicator
Fog Fog with reflector
Reversing Rever-sing with reflector
Reversing Fog
F250* F250C F250P F250SP - - F250B - F250R - -
F280 F280C - F280SP F280PC F280SPC F280B - F280R - -
F720 F720C F720P F720SP - - F720B - F720R - -
F726 F726C - F726SP F726PC F726SPC F726B - F726R - F726RB
F730 F730C - F730SP - F730SPC F730B F730B.C F730R F730R.C F730RBFor a 12 V light add -12 to the end of the reference (example: F726R-12 = 12 V reversing light) * F250 operates at 9/32 V
F250 – LED light – Front or rear fixing – 9/32 V – IP 67Can be mounted over 360 ˚ relative to the central axis
Dimensions (LxW) Depth Fixing spacing Cable Ingress protection Weight
252 mm x 13 mm 28 mm 235 mm 260 mm IP 67 82 g
F280 – LED light - 2 point rear fixing – IP 67Dimensions (LxW) Depth Insertion Fixing spacing Cable Ingress protection Weight
80 mm x 80 mm 34 mm 22 mm 45 mm 500 mm IP 67 140 g
F720 – LED light - Front fixing – IP 67Delivered with 2 screw caps in the colour of the optics – Option: chrome plated ring
Diameter Depth Insertion Fixing spacing Cable Ingress protection Weight
95 mm 45 mm 21 mm 80 mm 150 mm IP 67 100 g
F726 – LED light – 3 point rear fixing – IP 67
Diameter Depth Insertion Fixing diameter Cable Ingress protection Weight
95 mm 34 mm 21.5 mm 60 mm 500 mm IP 67 120 g
F730 – LED light – 2 point rear fixing – IP 67Delivered with 2 screw caps in the colour of the optics – Option: chrome plated trim
Diameter Depth Insertion Fixing diameter Cable Ingress protection Weight
122 mm 39 mm 33.5 mm 45 mm 500 mm IP 67 240 g
M U L T I F U N C T I O N L I G H T S
Phone : +33 (0)4 72 917 917 - Fax : +33 (0)4 72 917 918 - Email : [email protected] - Web site : www.sesaly.com 51
Vehi
cle
light
s
Do not hesitate to contact us for any other specific request !
2017
LED F R O N T T A I L L I G H T S
R E A R T A I L L I G H T S
S U R FA C E M O U N T E D 3 R D S TO P L I G H T
4 white LEDs / Translucent cover – Option: surface mounted support – IP67 – Blue and orange LEDs available (contact us)
Dimensions Fixing spacing Cable Weight 12 V reference 24 V reference
65 mm x 16 mm x 15 mm 45 mm 250 mm20 g37 gwith support
13.5021.000 13.5022.000
4 LED / Translucent cover – Foam seal on back – Horizontal or vertical mounting – IP67
Dimensions Fixing spacing Cable Weight 12 V reference 24 V reference
70 mm x 25 mm x 11.5 mm 33.4 mm 250 mm 20 g 13.5024.100 13.5024.600
1 white LED / Translucent cover – IP67
External diameter Total height Cable Weight 12/24 V reference
30 mm 32 mm 250 mm 26 g 13.5010.000
4 red LEDs / Red cover – Screw fixing - Option: surface mounted support – IP67
Dimensions Fixing spacing Cable Weight 12 V reference 24 V reference
65 mm x 16 mm x 15 mm 45 mm 250 mm20 g37 gwith support
13.0012.000 13.0013.000
4 LED / Red cover – Foam seal on back – Horizontal or vertical mounting – IP67
Dimensions Fixing spacing Cable Weight 12 V reference 24 V reference
70 mm x 25 mm x 11.5 mm 33.4 mm 250 mm 20 g 13.0020.100 13.0020.600
1 red LED / Red cover or translucent lens – IP67
External diameter Total height Cable Weight 12/24 V reference red lens
12/24 V reference translucent lens
30 mm 32 mm 250 mm 26 g 13.0014.000 13.0014.500
LED
Common characteristics:- 2 screw fixing- Ingress protection: IP 67
Dimensions Fixing spacing LED Cable Weight Colour 12 V reference 24 V reference
310 mm x 15 mm x 16 mm 284 mm 28 230 mm 58 g Red 308.12R 308.24R (1)
310 mm x 15 mm x 16 mm 284 mm 28 230 mm 58 g Crystal 308.12CR 308.24CR (2)
361 mm - Smiley 215 mm 12 260 mm 120 g Red 307.12 307.24 (3)
(1)
(3)
(2)
LED
LED
Phone : +33 (0)4 72 917 917 - Fax : +33 (0)4 72 917 918 - Email : [email protected] - Web site : www.sesaly.com52
2017
L I C E N C E P L A T E L I G H T S
F R O N T I N D I C A T O R S
S I D E I N D I C A T O R S
S I D E M A R K E R S
Common characteristics:- 12/24 Vdc- White LEDs- Ingress protection: IP 67
Characteristics:- 9/32 Vdc- Rear fixing- Operating temperature: -20 ˚C to + 70 ˚C- Ingress protection: IP 67
Characteristics:- 9/32 Vdc- Rear fixing- Operating temperature: -20 ˚C to + 70 ˚C- Ingress protection: IP 67
Common characteristics:- 12 Vdc or 24 Vdc- Reflector- Ingress protection: IP 67
Dimensions Fixings Spacing Cable LED Weight Reference
82 mm x 10 mm x 32 mm Built-in – 13 mm 65 mm Yes 2 58 gm EPL124 (1)
75 mm x 56 mm x 62 mm Surface mounted 39 mm No 6 58 gm EPL324* (2)
100 mm x 55 mm x 45 mm Surface mounted 70 mm Yes 2 120 gm EPL424 (3)
Dimensions Fixings Spacing Cable Weight Reference
Ø 55 mm x D 50 mm Built-in – 15.6 mm 60 mm 200 mm 80 g F055C
Dimensions Fixings Spacing Cable Weight Colour Reference
119 mm x 72 mm x 25 mm Surface mounted 49 mm 300 mm 110 g Amber 13.1051.500 (1)
119 mm x 72 mm x 25 mm Surface mounted 49 mm 300 mm 110 g Crystal 13.1051.000 (2)
Dimensions Fixings Spacing Cable LED Weight Reference 12 Vdc Reference 24 VdcOrange trim – 200 mm cable output for 12 Vdc and 500 mm for 24 Vdc
124 mm x 14 mm x 45 mm Surface mounted 112 mm Yes 2 40 g 12.1015.610 12.1015.810 (1)
100 mm cable output for 12 Vdc (cable + 6.35 terminals) and 165 mm for 24 Vdc (cable + 6.35 terminals)110 mm x 13 mm x 45 mm Surface mounted 90 mm No 6 40 g 12.1008.100 12.1010.150 (2)
2 AMP connectors – Mounted on flexible elbow support110 mm x 36 mm x 75 mm Suspended 90 mm Yes 2 74 g 12.1013.600 12.1014.600 (3)
(1) (3)(2)
* 1 licence plate light is sufficient for plates with dimensions 520 mm x 120 mm and 340 mm x 240 mm
(1) (3)(2)
(1)
(2)
LED
LED
LED
LED
Phone : +33 (0)4 72 917 917 - Fax : +33 (0)4 72 917 918 - Email : [email protected] - Web site : www.sesaly.com 53
Vehi
cle
light
s
Do not hesitate to contact us for any other specific request !
2017
Characteristics:- 12 Vdc or 24 Vdc- Delivered with screw caps- Ingress protection: IP 67
Characteristics:- 9/32 Vdc- Delivered with screw caps- Ingress protection: IP 67
Characteristics:- 9/32 Vdc- Red, orange or white polycarbonate lens (rear position, side marker, front position)- Rubber support – Flexible foot- Ingress protection: IP 67
Dimensions H x W x D Fixings Fixing Spacing Cable Weight Reference 12 V Reference 24 V
124 mm x 38.7 mm x 39 mm Surface mounted 83 mm 500 mm 70 g 12.0014.000 FGL.VH
Dimensions H x W x D Fixings Fixing Spacing Cable Weight Side Reference
150 mm x 40 mm x 38 mm Suspended – Flat flange 15 mm 500 mm 110 g Left FGL.VH.SPG (1)
150 mm x 40 mm x 38 mm Suspended – Flat flange 15 mm 500 mm 110 g Right FGL.VH.SPD (1)
149.5 mm x 40 mm x 58 mm Suspended – 90˚ elbow 15 mm 500 mm 110 g Left FGL.VH.SCG (2)
149.5 mm x 40 mm x 58 mm Suspended – 90˚ elbow 15 mm 500 mm 110 g Right FGL.VH.SCD (2)
Dimensions H x W x D Height Fixings Fixing Spacing Cable Side Reference
100 mm x 44 mm x 12 mm 184 mm Surface mounted – 90˚ angle 77 mm 250 mm Left 12.0017.300 (1)
100 mm x 44 mm x 12 mm 184 mm Surface mounted – 90˚ angle 77 mm 250 mm Right 12.0017.600
100 mm x 44 mm x 12 mm 114 mm Surface mounted 77 mm 250 mm Left or right 12.0017.000 (2)
2 F U N C T I O N O U T L I N E L I G H TSURFACE MOUNTED
SUSPENDED
SURFACE MOUNTED
2 F U N C T I O N O U T L I N E L I G H T S
3 F U N C T I O N O U T L I N E L I G H T S
(1) (2)
(1) (2)
LED
LED
LED
Phone : +33 (0)4 72 917 917 - Fax : +33 (0)4 72 917 918 - Email : [email protected] - Web site : www.sesaly.com54
2017
ACCESSORIES
Reversing radars 55
Retrovision 56
Sound feedback kit 56
Switches 57
Control units 57
Sun visor display 58
Voltage converters 59
USB solutions 60
Cigar lighter socket 61
Other accessories 61
Phone : +33 (0)4 72 917 917 - Fax : +33 (0)4 72 917 918 - Email : [email protected] - Web site : www.sesaly.com 55
Acc
esso
ries
Do not hesitate to contact us for any other specific request !
2017
Characteristics:-12/24 Vdc- Wireless connection between control unit and screen (sealed control unit)- Detection distance from 0.1 m to 5 m- Digital display between 0.3 m and 5 m- System starts with a warning beep when reverse gear is engaged- Increase in sound signal frequency when the distance falls below 1.5 m- Sound levels: High, low or OFF- Colour LED on display: • green for distance between 0.8 m and 1.5 m
• orange for distance between 0.4 m and 0.8 m• red for distance less than 0.4 m
- Visual distance indication on screen- Ultrasonic sensors
Mounting recommendations:- Ideal installation height: 500 mm to 650 mm (distance from sensors to ground)- Sensors installed on the same axis
Warning: Wireless version not suitable for mounting in a metal environment For this configuration, see wired version below
Built-in
Built-in or surface mounted
Reference Designation
PSW.124 Wireless reversing radar
Reference Designation
B2.R1 Built-in or surface mounted wired reversing radar
W I R E L E S S V E R S I O NPSW
W I R E D V E R S I O N B2.R1
Characteristics:-12/24 Vdc unit- Automatic detection of obstacles located behind the vehicle when reverse gear is engaged- Detection at 2.50 m for the central sensors or 60 cm for the 2 side sensors (selected by switch)- Sound and visual alarm (digital readout) in the cabin with indication of position and distance to the obstacle- Sound signal frequency variation according to distance- Ingress protection: IP 68- Interchangeable sensors- Supplied with connection cables:• detector/unit: 2.5 m of cable• unit/control panel and buzzer: 15 m of cableSuitable for metal bumpers
2 mounting options:- Built into the rear bumpers or into the shields- Surface mounted for bus and HGV versions with 50 cm offset possible (switch selection)
REVERSING RADARS
Phone : +33 (0)4 72 917 917 - Fax : +33 (0)4 72 917 918 - Email : [email protected] - Web site : www.sesaly.com56
2017
C O L O U R R E A R V I E W C A M E R A K I T
I N T E R P H O N E
Camera characteristics :- Colour- 270,000 pixels- 18 infrared LEDs- CCD technology- Dimensions: 70 mm x 44 mm x 54 mm- Audio- Vibration resistance: 10 G- Operating temperature: -20 ˚C to + 70 ˚C- Ingress protection: IP 67
7.0” monitor characteristics- Anti-reflection screen- Menu based mirror/normal switching- Audio- Visor- Screen display- Operating temperature: -20 ˚C to + 70 ˚C- Vibration resistance: 10 G- Compliant with 2003/97/EC, CE and EMC standards
The CAM KIT is a colour retrovision system comprising a camera and 7.0” monitor
Applications: Agricultural equipment, construction plant, coaches and buses, cranes, trucks, vans, dustbin trucks, etc.
Reference Designation Dimensions Light output Contrast Power consumption
CAM KIT 7’’ 7.0” colour retrovision kit 122 mm x 26 mm x 182 mm 450 cd/m² 250:1 10 W
12/24
12/24
Characteristics:- Kit comprising a “master” unit, a “slave” unit and a 25 m connection cable- dB level: 80/95 dB- Current consumption: 0.4 A- Dimensions: 122 mm x 84 mm x 50 mm- Ingress protection: IP 68- Fixing kit supplied
Type approval:EMC 89/336/EEC
2 sound feedback kits:
One-way feedback kit:To speak to the “slave” unit the red pushbutton on the “master” module must be pressed whilst speaking close to the module.This version always allows the “master” module to hear speech from the “slave” module.
Two-way feedback kit:To speak to the “slave” unit the red pushbutton on the “master” module must be pressed whilst speaking close to the moduleTo speak to the “master” unit the red pushbutton on the “slave” module must be pressed whilst speaking close to the module.
Reference Designation
BRI BCVI 1 One-way feedback kit
BRI BCVI 2 Two-way feedback kit
RETROVISION
SOUND FEEDBACK KIT
Phone : +33 (0)4 72 917 917 - Fax : +33 (0)4 72 917 918 - Email : [email protected] - Web site : www.sesaly.com 57
Acc
esso
ries
Do not hesitate to contact us for any other specific request !
2017
Characteristics:- Kit comprising a “master” unit, a “slave” unit and a 25 m connection cable- dB level: 80/95 dB- Current consumption: 0.4 A- Dimensions: 122 mm x 84 mm x 50 mm- Ingress protection: IP 68- Fixing kit supplied
Type approval:EMC 89/336/EEC
2 sound feedback kits:
One-way feedback kit:To speak to the “slave” unit the red pushbutton on the “master” module must be pressed whilst speaking close to the module.This version always allows the “master” module to hear speech from the “slave” module.
Two-way feedback kit:To speak to the “slave” unit the red pushbutton on the “master” module must be pressed whilst speaking close to the moduleTo speak to the “master” unit the red pushbutton on the “slave” module must be pressed whilst speaking close to the module.
Reference Voltage Designation Dimensions Insertion depth
250200 12 Vdc Rotary switch 12 Vdc30 mm x 30 mm x 63 mm 44.5 mm
250290 24 Vdc Rotary switch 24 Vdc
Reference Voltage Symbol Designation Dimensions Insertion depth
INTER VOY XL GYR
12 Vdc
Beacon Switch XL 12 Vdc - Beacon
28 mm x 28 mm 44.5 mmINTER VOY XL TRI Triflash Switch XL 12 Vdc - Triflash
INTER VOY XL PLA Ceiling Switch XL 12 Vdc - Ceiling
Reference Rest current Outputs Console Keys
ID DLC3000 (1)
8 mA at 12 Vdc
4 Pos. + scrolling
1
8
ID DLC4000 (2) 4 Pos. 2 Neg. 4
ID DLC8000 (3) 8 Pos. 2 Neg. 8
Characteristics:- 12 Vdc or 24 Vdc- 2-position rotary switch: On / Off- Allows actuation of a triangle, a beacon, an equipped bar, etc.- Maximum power: 180 W
Characteristics:- 12/24 Vdc- 4 to 8 functions- The DLC range has been designed for the new LED equipment.- The standard programming can be manually modified.- The DLC 4000 manages “standard” marker lights.- The DLC 3000 specifically controls scrolling marker lights as well as “standard” marker lights.- The DLC 8000 allows management of marker lights including more accessories.- Maximum power: 25 A- Automatic backlighting- Multi-directional foot- DLC 3000 - 4000 - 8000 console dimensions: 95 mm x 70 mm x 35 mm (excluding fixings)- DLC 3000 weight: 115 g- DLC 4000 – 8000 weight: 75 g- Operating temperature: - 25 ˚C to + 60 ˚C- EMC
Characteristics:- 2-position switch: On / Off- Allows actuation of a triangle, a beacon, an equipped bar, etc.- Maximum power: 120 W
R O T A R Y S W I T C H E S
S W I T C H E S
(1)
(2)
(3)
SWITCHES
CONTROL UNITSC O N T R O L U N I T S
Phone : +33 (0)4 72 917 917 - Fax : +33 (0)4 72 917 918 - Email : [email protected] - Web site : www.sesaly.com58
2017
Characteristics:- 12 Vdc- Afficheur pare-soleil à LED - Boîtier bleu - Dimensions : 250 mm x 18 mm x 80 mm- Entr’axe de fixation : 210 mm- Poids : 350 g
Characteristics:- Sealed polycarbonate box- 6 circuits- 50 W nominal per output- Cable entries by 3 PE11 cable glands- Dimensions: 170 mm x 140 mm x 80 mm
Operation:- Input voltage: 12 V and 24 V – Short circuit protected inputs- Output voltage: 12 Vdc
Internal connections:6 x 6.35 mm tab per input6 x 6.35 tab per output
Characteristics:- For trailers equipped with 1 or 2 indicator lights on each side- Dimensions: W = 62 mm – L = 106 mm – Height from support face to end of pins: 90 mm- Fixing by 135 mm long foot with two Ø 5.5 mm holes- Spacing 110 mm- Connection: by Ø 4 mm clips
Mounting location:Because of the dissipated power it is essential that the voltage dropper is mounted in a ventilated location and fixed to a metal part
A P S
V O L T A G E D R O P P E R S
Reference Voltage Designation
APS POLICE
12 Vdc
“POLICE” LED display
APS PM “POLICE MUNICIPALE” LED display
APS GEND “GENDARMERIE” LED display
APS DOUANES “DOUANES” LED display
Reference Designation
A B6.2001 “Standard” static voltage dropper – 24 V and 12 V input – 12 V output
A B6.97 “Special” static voltage dropper – 24 V / 12 V input – 12 V output
Reference Designation
Z 8TR1B 24/12 V voltage dropper relay – 2 indicator lights on each side
Z 8TR2 24/12 V voltage dropper relay – 1 indicator light on each side
This LED visor display lights automatically when the visor is lowered
24 Vdc to 12 Vdc - For bulbs
SESALY static voltage droppers operate in switched mode with almost no heat.
Other texts available on request
SUN VISOR DISPLAY
VOLTAGE CONVERTERS
Phone : +33 (0)4 72 917 917 - Fax : +33 (0)4 72 917 918 - Email : [email protected] - Web site : www.sesaly.com 59
Acc
esso
ries
Do not hesitate to contact us for any other specific request !
2017
V O L T A G E D R O P P E R S24 Vdc to 12 Vdc - Compact socket
V O L T A G E D R O P P E R S24 Vdc to 12 Vdc
V O L T A G E S T E P - U P
I N D I C A T O R P O W E R U N I T
Characteristics:- Allows hitching of a 24 V equipped vehicle to a 12 V trailer without changing the bulbs- Equipped with an N series 24 V input and a standard 7 pin 12 V output, with 1 earth and 6 x 42 W outputs- Each polarity is connected to an electronic board
Characteristics:- Stabilised output voltage from 12 V to 14 V for input voltage from 17 Vdc to 32 Vdc- Current from 3 A to 24 A- Direct / intermittent current- Negative earth connection- No heat release- Extruded aluminium and reinforced nylon unit- Ingress protection: IP 53
Characteristics:- 24 V output voltage for input voltage from 8 V to 18 V- Direct / intermittent current- Overvoltage, overheating and polarity inversion protection- Ingress protection: IP 53
Characteristic:- Connection by 6.35 lugs
This equipment allows an antenna to be insulated from earth, regulation of a direct current source, interference suppression, installation of accessories on positive earth vehicles, 12 V to 24 V conversion.
Reference Designation
A B/PRISE “Standard” static voltage dropper – 24 V and 12 V input – 12 V output
A B/PRISE/MULTIPLEX “Special” static voltage dropper – 24 V / 12 V input – 12 V output
Reference Designation Dimensions Current
AB3S
24/12 Vdc voltage dropper relay
71 mm x 87 mm x 50 mm 3 A / 6 A
AB6S 88 mm x 87 mm x 50 mm 6 A / 10 A
AB12S 126 mm x 87 mm x 50 mm 12 A / 18 A
AB18S166 mm x 87 mm x 50 mm
18 A / 21 A
AB24S 24 A / 30 A
Reference Designation Dimensions Current
AB124S12/24 Vdc voltage step up
88 mm x 87 mm x 50 mm 7 A
AB124S15 183 mm x 160 mm x 64 mm 15 A
Reference Designation Power 12 Vdc Power 24 Vdc
C GP01 (1) High power unit – 12/24 Vdc – 2 outputs2 x 55 W 2 x 70 W
C GP02 (2) High power unit – 12/24 Vdc – 2 outputs – alternate flashing
(1)
(2)
12 Vdc to 24 Vdc
Phone : +33 (0)4 72 917 917 - Fax : +33 (0)4 72 917 918 - Email : [email protected] - Web site : www.sesaly.com60
2017
S U R F A C E M O U N T E D U S B S O C K E T
Characteristics: - USB A type – 2 ways- Compatible with all equipment brands- Blue LED power on lighting- Direct 12/24 Vdc power supply- Available current: 2X2.5 A - Protected socket: - input against polarity inversions - input against over voltages - output against short-circuits- Operating temperature: -30 ˚C to + 70 ˚C- Current consumption at 12 Vdc: - Max: 0.96 A - Standby: 0.013 A- Current consumption at 24 Vdc: - Max: 0.46 A - Standby: 0.008 A- Current consumption at 28 Vdc: - Max: 0.38 A - Standby: 0.007 A- Regulations : R118 (Fire Smoke) - Automotive R10 04 (CEM)
12/24
USB socket delivered in 2 parts: a cover + an electronic boardCover easily clipped to the electronic board
Reference Designation ColourUSB3.APL.4 Surface mounted USB Grey
USB3.APL.4.IDB Surface mounted USB Blue Hawaï
USB3.APL.4.RDS060501 Surface mounted USB Beige
Othe r co lou rs ava i l ab le on reques t !
USB solutions
R O U N D U S B S O C K E T12/24
Charasteristics : - 2 versions : 1 or 2 USB sockets- Mounting : 30 mm diameter hole with or without bezel- Output indicator : Blue LED- Casework : black polycarbonate body- Input voltage range : 9-32Vdc- Output voltage : 5Vdc +/-0.2V- Output power : 2.1A (single) - 3.0A (double) - MAX 1.5A per socket- Power conversion : 90 %- Operating temperatures : -25°C to + 30°C- Off load current (quiescent current) : < 1.7 mA- Regulations : IP30 - R118 (Fire Smoke) - Automotive R10 05 (CEM)- Internal fuse & transients : protected by filters and rugged component selection
Reference Designation Colour
USB.RBL.1P Surface mounted round USB with 1 plug
USB.RBL.2P Surface mounted round USB with 2 plugs
USB.RBL.SUP Mounting support for seat installation of surface mounted round USB
Solutions dedicated to on-board applications,
Compatible with all multimedia devices and all brand !
USB.RBL.1P USB.RBL.2P
USB.RBL.SUP
12/24
Phone : +33 (0)4 72 917 917 - Fax : +33 (0)4 72 917 918 - Email : [email protected] - Web site : www.sesaly.com 61
Acc
esso
ries
Do not hesitate to contact us for any other specific request !
2017
C I G A R L I G H T E R S O C K E T
Reference Designation
114320 (1) Built-in DIN socket – 2-pins
KCO (2) Cigar lighter lead
PRO 15-12 (3) Universal 15 A – 12 V plug + LED switch
PRO 2 (4) Cigar lighter plug – 16 A – 12/24 Vdc
PRO 6 (5) Built-in plastic socket – 16 A
PRO 8 (6) Surface mounted DIN socket + plastic cover – 16 A
(1) (2)(3)
(4)(5)
(6)
R E F L E C T O R S
D I S C S A N D T A R E S
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
Designation Dimensions Fixing spacing Colour Reference
Reflector for flat surfaces 126 mm x 7 mm x 58 mm 112 mm Orange F C45OR (1)
Reflector for flat surfaces 126 mm x 7 mm x 58 mm 112 mm Red F C45R (2)
Reflector for flat surfaces 126 mm x 7 mm x 58 mm 112 mm Crystal F C45C (3)
Reflector for inclined surfaces – 6˚ 66 mm x 7 mm x 42 mm Orange F C46-6
Reflector for inclined surfaces – 15˚ 66 mm x 7 mm x 42 mm Orange F C46-15
Reflector with hole Ø 60 mm Orange F C14OR
Reflector with hole Ø 60 mm Red F C14R (4)
Reflector with hole Ø 60 mm Crystal F C14C
Adhesive reflector Ø 60 mm Orange F C24OR (5)
Adhesive reflector Ø 60 mm Red F C24R
Adhesive reflector Ø 60 mm Crystal F C24C
Reflector with hole Ø 80 mm Orange F C6OR
Reflector with hole Ø 80 mm Red F C6R
Reflector with hole Ø 80 mm Crystal F C6C (6)
Adhesive reflector 58 mm x 40 mm Orange F C21OR (7)
Adhesive reflector 58 mm x 40 mm Red F C21R
Adhesive reflector 58 mm x 40 mm Crystal F C21C
Reflector with hole 90 mm x 40 mm 70 mm Orange F C22OR
Reflector with hole 90 mm x 40 mm 70 mm Red F C22R
Reflector with hole 90 mm x 40 mm 70 mm Crystal F C22C (8)
Adhesive reflector 94 mm x 44 mm Orange F C23OR
Adhesive reflector 94 mm x 44 mm Red F C23R (9)
Adhesive reflector 94 mm x 44 mm Crystal F C23C
Triangular reflector with hole Red TRE 3
Speed Diameter Reference
25 KM/H 200 mm 25 PLA
60 KM/H 200 mm 60 PLA
65 KM/H 200 mm 65 PLA
70 KM/H 200 mm 70 PLA
80 KM/H 200 mm 80 PLA
90 KM/H 200 mm 90 PLA
100 KM/H 200 mm 100 PLA
110 KM/H 200 mm 110 PLA
Designation Dimensions Reference
Transparent tares – Black letters 325 mm x 110 mm FTLN
Transparent tares – White letters 352 mm x 110 mm FTLB
White background tares – Black letters 352 mm x 110 mm FBLN
CIGAR LIGHTER SOCKET
Phone : +33 (0)4 72 917 917 - Fax : +33 (0)4 72 917 918 - Email : [email protected] - Web site : www.sesaly.com62
2017
SPARES
We can supply spare parts on demand.
Please contact us if you need any spare parts.
Phone : +33 (0)4 72 917 917 - Fax : +33 (0)4 72 917 918 - Email : [email protected] - Web site : www.sesaly.com 63 Spa
res
& N
otes
Do not hesitate to contact us for any other specific request !
2017
Phone : +33 (0)4 72 917 917 - Fax : +33 (0)4 72 917 918 - Email : [email protected] - Web site : www.sesaly.com64
2017