STEDI Carling Type Rocker Switches

Image not found or type unknown Genesis Professional Edition LEDDriving Light (single)

FEATURES:

140W LED / 15540lm (raw) for industry-leading output37 x high-quality Lumileds LEDs that provide consistentperformanceLED spot reflector with the ability to use a combination modular filter73mm slim footprint that provides multiple mountingoptions3 stage operation: Full intensity, day time or night timepositioning optionsReverse polarity voltage protection and high currentwaterproof connectorsCISPR25 compliant, reduced radio frequencyinterference technologyThermal overload protection prevents light fromoverheatingHard-wearing UV stable powder coat finishIP68 & IP69K rated / Gore® waterproof membrane toprotect against water and dustPressure diecast aluminium housing and bezel providinglightweight strengthImpact-resistant polycarbonate filter for added protection3 year warranty.

KIT CONTENTS

1 x Genesis Professional Edition LED Driving Light withfitted mounting bracket (GENESISLED210)1 x Spot filter ( F210C )1 x 4 pin high current waterproof harness adaptor1 x Mounting hardware1 x User instructions.

GENESIS PROFESSIONAL EDITION LED DRIVING LIGHTS PHOTOMETRICS – COMBO FILTERS 1 LUX AT 763M

Dents n All 4x4 Accessories Catalogue | Phone: 021 552 6560 | www.dentsnall4x4accessories.co.za

Developer By PDF Catalog Woocommerce

https://www.oppositelock.co.za/filters-accessories?filter=filters-accessories,210mm

https://www.oppositelock.co.za/filters-accessories?filter=filters-accessories,210mm

https://au.lightforce.com/products/genesis-clear-filter

GENESIS PROFESSIONAL EDITION LED DRIVING LIGHTS PHOTOMETRICS – SPOT FILTERS 1 LUX AT 1119M

Read More

Categories: Round Driving Lights

Product Description

Image not found or type unknown 20? Single Row LED Light Bar – Combo

Extruded aluminium body with black anodized coatingIP69K rated to protect against moisture / contaminant ingressHard coated, scratch and high impact resistant polycarbonatelensCustom moulded strain relief connector fitted to military speccableGenuine Gore® waterproof membrane with mechanical sealOver, under and reverse voltage protectionPulse width modulation thermal management circuitryProtected against electromagnetic and radio frequencyinterference (RFI)Stainless steel brackets and mounting hardwareComprehensive wiring harnessBroad operating voltage range of 10 ~ 36 voltsInput cable length: 450mm (17.72?).Wiring Harness Length2.5m (92.43?)Deutsch waterproof connectorsRoHS certified3 Year warranty.

1 LUX AT 404 METRES



https://www.oppositelock.co.za/wp-content/uploads/2021/11/NEW-GenesisLED-Single-Beam-Pattern-Spot.jpg

https://www.oppositelock.co.za/wp-content/uploads/2021/11/NEW-GenesisLED-Single-Beam-Pattern-Combo.jpg

https://www.dentsnall4x4accessories.co.za/catalogue/lighting/round-driving-lights/genesis-professional-edition-led-driving-light-single/

https://www.dentsnall4x4accessories.co.za/product-category/lighting/round-driving-lights/

Read More

Categories: Light Bars

Product Description

Image not found or type unknown 20? Dual Row LED Bar – Dual Wattage

Extruded aluminium body with black anodized coatingIP69K rated to protect against moisture / contaminant ingressHard coated, scratch and high impact resistant polycarbonatelensCustom moulded strain relief connector fitted to military speccableGenuine Gore® waterproof membrane with mechanical sealOver, under and reverse voltage protectionPulse width modulation thermal management circuitryProtected against electromagnetic and radio frequencyinterference (RFI)Stainless steel brackets and mounting hardwareComprehensive wiring harnessBroad operating voltage range of 12 ~ 36 voltsInput cable length: 450mm (17.72?).Wiring Harness Length2.5m (92.43?)Deutsch waterproof connectorsRoHS certified3 Year warranty.

PERFORMANCE



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/light-bars/20″-single-row-led-light-bar-combo/

https://www.dentsnall4x4accessories.co.za/product-category/lighting/light-bars/

Read More


Product DescriptionD20XP 1 x Lightforce Dual Row LED Bar 1 x Full wiring harness (including relay and switch connector) 2 x Stainlesssteel brackets and hardware 1 x User instructions

Image not found or type unknown Striker Professional Edition LED DrivingLight (Twin Pack)

Read More


Product Description

2 x Striker Professional Edition LED Drive 2 x Clear filters with Lightforce logo 2 x Reversible mounting hardware 1 xLightforce single switch 8 pin adaptor (SWADP4) 1 x Complete DIY installation kit including 12V harness, headlightadaptors, dashboard switch and all the consumables required 1 x User instructions.



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/light-bars/20″-dual-row-led-bar-dual-wattage/


https://www.dentsnall4x4accessories.co.za/catalogue/lighting/light-bars/striker-professional-edition-led-driving-light-twin-pack/


STEDI Carling Type Rocker Switches

Read More

Categories: Wiring & Switches

Product Description

STEDI Short Type Push Switches For Toyota

Read More


Product Description



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/wiring-switches/stedi-carling-type-rocker-switches/

https://www.dentsnall4x4accessories.co.za/product-category/lighting/wiring-switches/

https://www.dentsnall4x4accessories.co.za/catalogue/lighting/wiring-switches/stedi-short-type-push-switches-for-toyota/


STEDI Switch Panel for Ford Ranger MK2MK3 Raptor And Everest

THE NITTY GRITTY.

STEDI all-new Ford switch fascia to suit the Ford Ranger PX2,PX3, Ranger Raptor and Everest (2015 - 2019), effortlessly solvesthe lack of switch blanks in the aforementioned Ford models. TheSTEDI switch panel requires no modification whatsoever to theoriginal dash. Unlike alternate solutions, our installation process iscompletely non-intrusive, meaning you do not need to remove anyconsole or trim pieces for the installation. Switch wiring aside, thefascia panel can be fitted in under 60 seconds. Compatible with ourentire range of Square Type Pushes switches, which have O.E likelatching feedback. STEDI Registered Design 201916784 Switchesand blanks sold separately.

TECH SPECS

MATERIAL INJECTION MOULDED PLASTIC

COMPATIBILITY

Ford Ranger 2015 to current | World Wide

Ford Everest 2015 to 2019 | World Wide

Ford Ranger Raptor 2018 to current | World WideRead More


Product Description

STEDI Square Type Push Switches forSTEDI Fascia Panels

THE NITTY GRITTY.DETAILS New for 2018 our new square 22 x 22mm Push latchingtype switch designed for the new incoming Toyota models like theToyota Land Cruiser Prado (GDJ150R, second face-lift. KEYFEATURES Ice Blue LED Back Lighting - Exact colour match toOEM switch backlighting Green Upper Light is Active when Poweris ON - Exact match to OEM switch. Lower Light is Active whenDash Lights are ON Laser Etched print ensure our print will neverrub off with use Rated at 3A on 12v COMPATIBLE TOYOTAMAKES Toyota Prado 150 Series | 2018 - Onward Toyota RAV4 |2019 - Onward Fits the STEDI Ford and Toyota 70 series & Ford



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/wiring-switches/stedi-switch-panel-for-ford-ranger-mk2-mk3-raptor-and-everest/


switch fascias. Toyota Hiace (Feb 2019 - Current) Toyota Camry(Sep 2017 - Current) Toyota Corolla ( Jun 2018 - Current) Pleaseensure our switches are always wired through a fused relay. Pleasenote we have 4 different OEM style Toyota switches, if your vehiclemake is not listed above, please view our other product listings.Read More


Product Description

Type: Light BarRear LightsSTEDIRoof Light BarWork LightsSpot LightsAuxiliary BatteryWinch PowerTray LightsLeft Side LightsRight Side LightsRear Diff LockFront Diff LockPower On/OffSTEDI OWLPortable FridgeFog LightsBeaconAir CompressorBlankRock LightsUSB Charger InsertRJ45 UHF Insert



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/wiring-switches/stedi-square-type-push-switches-for-stedi-fascia-panels/


STEDI Nissan Patrol Y62 Series 5 HighBeam Adapter

THE NITTY GRITTY.

Designed to work with all STEDI Quick Fit Wiring Harnesses.Designed ONLY for Nissan Patrol Y62 Series 5 models (from 2020onwards).

TECH SPECS

Connector TypeNissan Y62 Patrol Series 5 LED Head LightAdapter

Weight 0.3kgRead More


Product Description

STEDI Mazda BT50 (Post AUG-2020) PiggyBack Adapter

THE NITTY GRITTY.

Specifically designed to suit the Mazda BT50 (Post AUG-2020)LED Headlight ONLY. The easy solution for wiring up yourDriving Lights with no need for splicing, trapping, or soldering as itis a direct Plug & play install. Designed to work with all STEDIHigh Beam Wiring Harnesses.

TECH SPECS

Connector Type 6 Pin

Fits Isuzu D-Max Mazda BT50 (Post AUG-2020)



Product Description



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/wiring-switches/stedi-nissan-patrol-y62-series-5-high-beam-adapter/


https://www.dentsnall4x4accessories.co.za/catalogue/lighting/wiring-switches/stedi-mazda-bt50-post-aug-2020-piggy-back-adapter/


STEDI Piggyback Adapters To Suit ISUZU

THE NITTY GRITTY.

Specifically designed to suit the Isuzu D-Max (Pre AUG-2020) / M-ux (Current) with factory LED Headlight ONLY. The easy solutionfor wiring up your Driving Lights with no need for splicing,trapping, or soldering as it is a direct Plug & play install. Designedto work with all STEDI High Beam Wiring Harnesses.

TECH SPECS


Fits Isuzu D-Max /M-ux

D-Max (Pre AUG-2020) / M-ux (Current)with Factory LED Headlights

Read More


Product Description

Isuzu D-Max (Pre AUG-2020)/ M-UX (Current) LED Models Piggyback AdaptersIsuzu D-Max (Post AUG-2020)

STEDI Piggyback Adapters To SuitMitsubishi

MITSUBISHI MQ TRITON HID HEADLIGHT PIGGY BACK ADAPTER:

THE NITTY GRITTY.Specifically design to suit the Mitsubishi MQ Triton which is fittedwith factory HID / Xenon headlamp. The easy solution for wiring upyour Driving Lights with no need for splicing, trapping or solderingas it is a direct Plug & Play install. Designed to work with all STEDIQuick Fit Wiring Harnesses.

Read More


Product Description

Mitsubishi MQ Triton HID Headlight Piggyback Adapters



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/wiring-switches/stedi-piggyback-adapters-to-suit-isuzu/


https://www.dentsnall4x4accessories.co.za/catalogue/lighting/wiring-switches/stedi-piggyback-adapters-to-suit-mitsubishi/


Mitsubishi MR Triton LED Headlight Piggyback AdaptersMitsubishi QE Pajero Sport Headlight Piggyback AdaptersMitsubishi QF Pajero Sport Headlight Piggyback Adapters

STEDI Piggy Back AdaptersH1/H4/HB3/H7/H8/H9/H11

THE NITTY GRITTY.Eliminate the need to splice and or solder your vehicles factorywiring with our piggy back adapters. Available adapters H1 | H3 |H4 | HB3 | H7 | H8

Read More


Product Description

STEDI Nissan Navara/NP300 Plug And PlayWiring Harness Kit

THE NITTY GRITTY.

The Nissan Navara NP300 community know all too well theheadaches involved in trying to trigger driving lights off of the highbeam of the NP300 fitted with factory LED headlights. Blownheadlight modules are just some of the problems you're likely toencounter. So far the only tidy solution has been to spend $200 on aGenuine Nissan OE Driving Light harness, which has no switchillumination wired in, and is only capable of supporting a total of15amp, not to mention doesn't come include with water-proofconnectors. We've addressed all of these short-comings and in trueSTEDI style we're delivering at accessible pricing Key features of the STEDI Nissan Navara NP300 Wiring Kit.

OEM Matching Piggy Back Adaptor specifically for theNP300.Built in electronics make our harness fully compliant with thenegatively switched systemFeaturing a total 4.8 meters of wiring (full stretched out)2.4m of cabling from Relay to Switch



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/wiring-switches/stedi-piggy-back-adapters-h1-h4-hb3-h7-h8-h9-h11/


2.0m of cabling from Driving Light connector to RelayDual Deutsch DT-2 Connection | connect two lights bars ordriving lights.Inline 30A Fuse with Water-Proof Fuse Holder12vDC 60A Switching RelayUniversal Round Dime Switch ON/OFF Switch supplied | OEType Navara Switches Sold separately.UV Rated Insulation2 x DTP & DT-2 connector to connect two lights bars ordriving lights.

TECH SPECS

Wiring Kit Rating 12vDC 30A

Relay Rating 12vDC 60A

Supplied Fuse 30A

Connector Type Deutsch DT-2 & DTP Waterproof Connectors Read More


Product Description



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/wiring-switches/stedi-nissan-navara-np300-plug-and-play-wiring-harness-kit/


STEDI Single Connector Plug & Play SmartHarness™ High Beam Driving Light Wiring

THE NITTY GRITTY.

Plug & Play Wiring Harness for Quick Fit installation of yourdriving lights. The supplied H3 (HB3) and H4 Adapters trigger yourdriving lights from your high beam without cutting or soldering anywiring. Simply unplug your HB3 or H4 connector at the back ofyour headlight's bulb, plug in our adapter and you're done! Drivinglights will only trigger from a high beam, and the switch will actonly as an isolator. Our new V2.0 has built-in electronics thatautomatically detects whether your system is positive or negativeswitched, and will work right out of the box without anymodification whatsoever. Toyota's, Ford Ranger, Mazda BT50among many other popular 4x4 are notorious for being very difficultand costly to wire driving lights to high beam, our quick fit harnesstakes all the guesswork out of it. Contains everything you need toget your lights connected: ON/OFF Switch, 60A Relay, 30A Fuse,ribbed cable protectors, heat shrink wrapped relay.

Featuring a total of 4.8 meters of wiring (full stretched out)2.4m of cabling from Relay to Switch2.0m of cabling from Driving Light connector to Relay2.0m from H4 or HB3 Adapter to RelayTotal cable length 6.4m12vDC 30A Rated Fuse Kit12vDC 40A Switching RelayPush Button ON/OFF SwitchUV Rated InsulationInstruction included.1 x DT connector to connect 1 Light Bar

HB3 & H4 are the most common wiring connects found in mostpopular makes and models. If your car does not use H4 or HB3, thiswiring harness can still be used to connect to a high beam. We alsosell separately H1, H9 & H7, as well as vehicle-specific adaptors forthe Amarok, 200 series Landcruiser, MQ & MR Triton, Isuzu M-UX/ D-Max, Ranger / Raptor PX2 & PX3 7 Holden Colorado & NissanD23 Navara.

TECH SPECS



Fuse 30A

Light Connector Deutsch DT Waterproof

Instruction Included

Max Load 25A @12vRead More



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/wiring-switches/stedi-single-connector-plug-play-smart-harness-high-beam-driving-light-wiring/


Product Description

STEDI SUZUKI JIMNY (JB64WJB74W)Piggy Back Adapter

THE NITTY GRITTY.

Specifically designed to suit the Suzuki Jimny (JB64W/JB74W).The easy solution for wiring up your Driving Lights with no needfor splicing, trapping or soldering as it is a direct Plug & Play install.Designed to work with all STEDI Quick Fit Wiring Harnesses.

TECH SPECS


Fits Suzuki Jimny 2018+ Read More


Product Description

STEDI VW Amarok Headlight Piggy BackAdapter

THE NITTY GRITTY.

Specifically designed to suit the Volkswagen Amarok (All Models).The easy solution for wiring up your Driving Lights with no needfor splicing, tapping or soldering as it is a direct Plug & Play install.Designed to work with all STEDI Quick Fit Wiring Harnesses.

TECH SPECS


Fits Volkswagen Amarok: All ModelsRead More





https://www.dentsnall4x4accessories.co.za/catalogue/lighting/wiring-switches/stedi-suzuki-jimny-jb64wjb74w-piggy-back-adapter/


https://www.dentsnall4x4accessories.co.za/catalogue/lighting/wiring-switches/stedi-vw-amarok-headlight-piggy-back-adapter/


Product Description

STEDI Piggyback Adapters To SuitTOYOTA

Toyota Landcruiser 200 Series:

THE NITTY GRITTY.

Specifically designed to suit the Landcruiser 200 Series (2016+)with factory LED Headlight ONLY. The easy solution for wiring upyour Driving Lights with no need for splicing, trapping or solderingas it is a direct Plug & Play install. Designed to work with all STEDI

Quick Fit Wiring Harnesses.

Toyota Prado 150 Series (MY18+):

THE NITTY GRITTY.

The new Landcruiser Prado has magnificent factory fitted Bi-LEDheadlamps. Problem is that wiring auxiliary driving lights that arehigh-beam switched is a nightmare. Up until this point, the onlyoption for professional installers and DIY enthusiasts has been topurchase the Genuine Toyota Harness which retails for $190.00. Below we compare features of the STEDI designed harness compared to the Genuine Toyota offering.



FEATURE COMPARISON

Switch "ACTIVE" illumination

STEDI ?

TOYOTA ×

Dash Light Illumination ×

STEDI ?

TOYOTA ×

Compatible connectors to popular driving lights

STEDI ?

TOYOTA ×

Interior dash components needing to be removed for install

STEDI 3

TOYOTA 12

Maximum current support

STEDI35A+ (when used withSTEDI SMART harness)

TOYOTA 30AThe wire lengths on the STEDI patch harness have been optimizedto facilitate a very stealth factory-like install. The patch harnessoffered for sale is compatible with all STEDI Smart Driving Lightharnesses sold separately and included with our driving lights andlight bars. In the interest of safe driving, like the genuine Toyotaharness. we have designed our patch harness not to function with thevehicle's factory auto-high beam or auto-headlight system. Similarto the Toyota harness, for safety reason This Product is protected by Provisional Patent 2020902757 STEDI Designed & Manufactured: This product is not endorsed by, directly affiliated with Toyota. All product and company names are the registered trademarks of their original owners. The use of any trade name or trademark is for compatibility and reference purposes only and does not imply any association with the trademark holder of their product brand.



Toyota Fortuner Crusade (LED models)

THE NITTY GRITTY.

Specifically designed to suit the Toyota Fortuner with factory LEDHeadlight ONLY. The easy solution for wiring up your DrivingLights with no need for splicing, trapping or soldering as it is adirect Plug & Play install. Designed to work with all STEDI Quick

Fit Wiring Harnesses.

Read More


Product Description



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/wiring-switches/stedi-piggyback-adapters-to-suit-toyota/


STEDI LED Work Light Wiring Kit LoomHarness (NOT HIGH BEAM TRIGGERED)

THE NITTY GRITTY.

STEDI - Fully Assembled Wiring kit for LED Work Lights or camplights. It contains everything you need to get your lights connected.Press button ON/OFF switch. The included relay is rated to 40A soyou can use the one wiring kit to connect several light bars to theone wiring loom. Featuring a total of 4.8 meters of wiring (fullstretched out)

2.8m of cabling from Relay to Switch2.0m of cabling from light connectors to Relay12vDC 30A Rated Fuse Kit12vDC 40A Switching RelayON/OFF SwitchUV Rated Insulation

Please note that this harness is not high beam activated, please referto our other listing for our High Beam Trigger light harnesses.

TECH SPECS



Fuse 30A

Cable Length 4.5m +or-

Switch Type Dime Switch

Instruction Included



Rated 30ARead More


Product Description

STEDI Nissan Navara/NP300 Piggy BackAdapter Only

*** ONLY COMPATIBLE WITH STEDI HARNESSES, If usedwith another brand wiring harness, you will blow the vehicle'sIPDM (a module which controls headlights) and incur a costly repairfrom Nissan. This piggyback adapter is compatible with any highbeam triggered wiring harness from Stedi, including the harnesseswe include with our lights.

THE NITTY GRITTY.

Designed to work with all STEDI Quick Fit Wiring Harnesses.

TECH SPECS

Connector TypeNissan D23 NP300 Navara LED Head LightAdapter

Read More


Product Description

STEDI Dual Connector Plug & Play SMARTHARNESS™ High Beam Driving LightWiring

Universal Quick Fit SMART Harness™ - High Beam triggered.

THE DEVIL IS IN THE DETAIL Whilst others claim to beuniversally compatible with both positive and negative switched



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/wiring-switches/stedi-led-work-light-wiring-kit-loom-harness-not-high-beam-triggered/


https://www.dentsnall4x4accessories.co.za/catalogue/lighting/wiring-switches/stedi-nissan-navara-np300-piggy-back-adapter-only/


vehicles, you'll soon discover that this is not the case. TheSTEDI SMART Harness™ is unique in that it has a built-inmicroprocessor which deals with even the most complex vehiclewiring systems. When installing your LED Driving Lights our aimwas to create a stress-free process with piece of mind of knowing itwill all come together in the end.

BRIDGING THE GAP Whether your driving lights use the popularDT or DTP connectors, our SMART Harness™ caters forboth providing a cross-compatibility platform that will lay anyconfusion to rest. Dual output allows for running anything from asingle to dual slim LED Light bar to a set of high performance LEDSpot Lights like our STEDI Type-X.ADR COMPLIANT 100% Plug & Play, no splicing or graftingrequired, our SMART Harness™ will install straight to your vehiclehassle-free triggering straight from your vehicles high beam. Withan all-new waterproof switch for open cabin application, includedHB3 + H4 Piggy Back adaptors fitting most vehicles factoryheadlights with H1, H7 & H9 also available, this is your all in onewiring solution.



DETAILS

Dual Output Quick Fit SMART Harness™ | Our all-in-one wiringloom Our all-new Plug & Play SMART Harness™ for Quick Fitinstallation of your driving lights. Incredible High Current 10AWGcable, negative switch compatible, waterproof switch & DTP to DTReducers bridging the compatibility between the two connectortypes. Our SMART Harness™ has been designed around theconsumer to simplify the installation process. The supplied HB3and H4 Adapters trigger your driving lights from your high beamwithout cutting or soldering any wiring. Simply unplug your HB3 orH4 connector at the back of your headlight's bulb, plug in ouradapter, and you're done! Driving lights will only trigger from ahigh beam, and the switch will act solely as an isolator. Our newSMART Harness™ has a built-in microprocessor that automaticallydetects whether your system is positive or negative switched, andwill work right out of the box without any modification whatsoever.Toyota's, Ford Ranger, Mazda BT50 among many other popular 4x4are notorious for being very difficult and costly to wire drivinglights to high beam, our quick fit harness takes all the guesswork outof it. It contains everything you need to get your lights connected:ON/OFF Switch, 60A Relay, 35A Fuse, ribbed cable protectors, heatshrink wrapped relay, DTP to DT Reducers.

Featuring a total of 4.8 meters of wiring (full stretched out)2.4m of cabling from Relay to Switch2.0m of cabling from Driving Light connector to Relay2.0m from H4 or HB3 Adapter to RelayTotal cable length 6.4m12vDC 35A Rated Fuse Kit12vDC 60A Switching RelayPush Button ON/OFF SwitchUV Rated InsulationInstruction included.

HB3 & H4 are the most common wiring connectors found in mostpopular makes and models. If your car does not use H4 or HB3, this



wiring harness can still be used to connect to a high beam. We alsosell separately H1, H9 & H7, as well as vehicle-specific adaptors forthe Amarok, 200 series Landcruiser, MQ & MR Triton, Isuzu M-UX/ D-Max, Ranger / Raptor PX2 & PX3 7 Holden Colorado.

SPECIFICATIONS

WIRING RATING 12vDC 35A

RELAY RATING 12vDC 60A

FUSE 35A

CONNECTOR DT & DTP

INSTRUCTIONS Included

MAX LOAD 35A @12v

INCLUDED PIGGYBACK HB3 & H4Read More


Product Description

STEDI Ford Ranger Raptor & Everest PiggyBack Adapter

DETAILS

The STEDI Quick-Fit high beam piggy back adaptor is designedspecificially to fit the PX2, PX3 Ford Ranger, Ford Ranger Raptor &Ford Everest all models. The above named vehicles high beam bulbsresides inside of a sealed rigid dust-cap, therefore using traditionalpass-through adaptors means piercing a hole through the vehiclesdust-cap. Our Ford Quick-Fit piggy back adaptor connects to the 8pin plug which is external to the headlamp with incredibility easyaccess. The T-connector on the back of our harness plugs straight into all existing STEDI Driving Light Smart harnesses, which mayalso fit other harnesses on the market.

SPECIFICATIONS

CONNECTOR TYPE 8 Pin

FITS FORD: Ranger, Ranger Raptor, Everest.Read More


Product Description



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/wiring-switches/stedi-dual-connector-plug-play-smart-harness-high-beam-driving-light-wiring/


https://www.dentsnall4x4accessories.co.za/catalogue/lighting/wiring-switches/stedi-ford-ranger-raptor-everest-piggy-back-adapter/


STEDI SINGLE 8.5" Type-X Pro LEDDriving Light

1.15KM BEAM THROW Using the latest optic simulationmodeling, the reflector geometry was tweaked over and over againto achieve a highly functional beam pattern. No doubt the attentiongrabber is the unrelenting beam distance of 1.155km, however, thereal strength of our Type-X™ PRO is in mid to long-range lightdistribution that really sets it apart. An astonishing beam throwcoupled with a homogeneous wide beam will have you insist ondriving only when the sun's down.YOUR LIGHTS YOUR WAY. Pink? Green? Blue? Orange? Greyor all Black? The choice is yours. We've designed the inner ringfasteners to be independent of the main sealing structure, allowingyou to change the color that best suits you. We've included grey andorange in the kit to get you started, or if you prefer all black, simplydon't fit any ring at all. Our colored filters and iconic STEDI smilecovers are backward compatible too. Additional colors soldseparately.



A WOLF IN WOLF'S CLOTHING Forget folded steel brackets3mm 4mm or 5mm it's all yesterday's news. Type-X™ PRO is allabout pushing boundaries, the bracket system is a 10mm thick high-pressure die-cast aluminum marvel of engineering. Ribbed in all theright places to ensure no vibration and no prospect for fatigue. OurType-X™ PRO bracket was designed to withstand extreme andprolonged corrugations time and time again. True to STEDI'ssignature design principles we’ve added brushed stainless steelshoulder plates, which will look just as comfortable on a tricked out70 series as it will be mounted to a PRO race buggy.PROPER TESTED PHOTOMETRIC DATA Don’t confuse our Isolux and Lumens with the baseless numberscirculating around the internet. Our published specifications arecomprehensively tested by a photometric laboratory. We stand byour photometric data.



DETAILS

ALWAYS ON THE CUTTING EDGE. Cutting edge performancestarts with cutting-edge LED technology. To achieve genuinecategory-leading performance our Type-X™ Pro is equipped with37 x Oslon High-Flux LEDs, selected for having the #1 highestlumen density per mm2 of any other comparable LED on themarket. Compared to the two other leading spotlights brand's similarofferings, the LEDs used in Type-X™ PRO have + 23% and +42%higher lumen density per mm2 in comparison. The net result ishigher net light volume and unrivaled beam throw. A WOLF IN WOLF’S CLOTHING The hard-coated optical grade lens shares thesame DNA as ballistic glass making it virtually indestructible. A UVstabilizer has also been added to ensure our lenses truly withstandthe test of time with no discoloring or UV degradation. This hasallowed us to do away with any secondary lens covers or filterswhich are known to significantly reduce light transmission. ICONIC PERFORMANCE Using the latest optic simulationmodeling, the reflector geometry was tweaked over and over againto achieve a highly usable beam pattern. No doubt the attentiongrabber is the unrelenting beam distance of 1,155m (tested in pairs,combo beam), however, the real strength of our Type-X™ PRO is in



mid to long light distribution that really sets it apart. Our key focuswas on driver confidence, by increasing the beam throw the driverhas longer analysis time. We maximized driver comfort bysmoothing out the beam eliminating shadows. We reduced the lightwasted in unimportant zones like treetops and immediately in frontof the vehicle. The result is a homogeneous, unrelenting beam thatwill support you well in any adventure. Unlike our competitors, eachType-X™ PRO lamp has 6 built-in flood reflectors for improvedlight distribution out into the road shoulders. The built-in wide-beamreflector eliminates the need to add any wide beam covers, whichare not only less efficient at distributing light, covers also withholdvaluable light transmission.

SPECIFICATIONS

LED 37 x Oslon High-Flux LED

RAW LUMENS 26,270 (Pair)

TESTED LUMENS 15,870 (Pair)

AMP DRAW 10.4A @ 13.2v (each)

POWER DRAW 137W

CANDELA 1,334,025cd

BEAM PATTERN 6 x Spread 31 x Pencil Beam

INGRESS PROTECTION IP68 | Submersible up to 3m



COLOUR TEMP (CCT) 5700K

VOLTAGE COMPATIBILITY 12v & 24v

LUMEN MAINTENANCE 50,000 LM-80

WEIGHT 2.860kg (each)

PHOTOMETRIC DATA

10 M 13,340 Lx

50 M 533 Lx

200 M 33 Lx

300 M 14 Lx

400 M 8 Lx

1,000 M 1.3 Lx

1,155 M 1 LxRead More


Product Description

STEDI 7" Type-X Sport LED Driving Lights

ENTER THE WORLD OF STEDI The internet is littered withmediocre lights. 98% of driving lights offered in the marketplace areoff the shelf imports with the reseller’s laser logo and subsequentprice mark-up. Don’t even get us started on the fictitiousperformance claims. When you enter the world of STEDI, you’rebuying into a product which is mechanically and opticallyengineered with our know-how and our tooling, with our reputationand warranty standing right behind it. Our lights won’t fade, turnyellow and fall-off at the first sign of corrugations. Our photometricdata is lab tested, not photoshopped – We stand by it.



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/round-driving-lights/stedi-single-8-5-type-x-pro-led-driving-light/


DETAILS

THE NERDY DETAILS

4mm thick 304 Series Stainless Mounting bracket, whichincludes rubber dampener and an additional 3mm upper plate.A360.0 Cast Housing | Boasting superior strength andcorrosion resistance.3mm Thick GE Lexan Lens with hard coating | Virtuallyunbreakable & scratch resistant100% Polyester UV and abrasion resistant powder coatIP68 | Dust & Particle tight + Water-proof up to 3 metersNitto Denko Pressure Equalization vent with membrane |Protects against water ingress, dust & contaminants.Environmentally Sealed Deutsch® DT-2 connectorEMI & RFI Suppression circuitry – We guarantee it.Each 7" TYPE-X Sport comprises 32 of OSRAM’s® finestOSLON® LED, selected for its high luminous flux andperfectly matches optical properties.4 wide-beam reflectors built-in, which form a lateral shapedflood pattern designed to minimize valuable light wasted upto the sky.5700K CCT offers stunning clarity and definition withexcellent Colour Rendering Index (CRI)



SPECIFICATIONS

LED 32 x Osram Oslon SSL




POWER DRAW 85W (each)

CANDELA 819,200cd

BEAM PATTERN 4 x Spread 28 x Spot Beam






PHOTOMETRIC DATA

10 M 8,129 Lx



50 M 327 Lx

200 M 20 Lx

300 M 9 Lx

400 M 5 Lx

895 M 1LxRead More


Product Description

STEDI 8.5" Type-X Sport LED DrivingLights

ENTER THE WORLD OF STEDI The internet is littered withmediocre lights. 98% of driving lights offered in the marketplace areoff-the-shelf imports with the reseller’s laser logo and subsequentprice mark-up. Don’t even get us started on the fictitiousperformance claims. When you enter the world of STEDI, you’rebuying into a product that is mechanically and optically engineeredwith our know-how and our tooling, with our reputation andwarranty standing right behind it. Our lights won’t fade, turn yellow,and fall off at the first sign of corrugations. Our photometric data islab tested, not photoshopped – We stand by it.



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/round-driving-lights/stedi-7-type-x-sport-led-driving-lights/


DETAILS

THE NERDY DETAILS

4mm thick 304 Series Stainless Mounting bracket, whichincludes rubber dampener and an additional 3mm upper plate.A360.0 Cast Housing | Boasting superior strength andcorrosion resistance.3mm Thick GE Lexan Lens with hard coating | Virtuallyunbreakable & scratch resistant100% Polyester UV and abrasion resistant powder coatIP68 | Dust & Particle tight + Water-proof up to 3 metersNitto Denko Pressure Equalization vent with membrane |Protects against water ingress, dust & contaminants.Environmentally Sealed Deutsch® DTP-2 connectorEMI & RFI Suppression circuitry – We guarantee it.Each TYPE-X Sport comprises 36 of OSRAM’s® finestOSLON® LED, selected for its high luminous flux andperfectly matches optical properties.Four wide-beam reflectors built-in, which form a lateral-shaped flood pattern designed to minimize valuable lightwasted up to the sky. Also available separately are the snap-onwide-beam covers, for environments demanding an increasedperipheral vision.5700K CCT offers stunning clarity and definition withexcellent Colour Rendering Index (CRI)



SPECIFICATIONS

LED 36 x Osram Oslon SSL




POWER DRAW 129W

CANDELA 1,102,500cd

BEAM PATTERN 4 x Spread 32 x Spot Beam






PHOTOMETRIC DATA

10 M 11,025 Lx



50 M 441 Lx

200 M 27 Lx

300 M 12 Lx

400 M 6 Lx

1,000 M 1.1 Lx



Product Description

STEDI Quad Pro LED Driving Lights

Registered Design 202013629

COMPACT DESIGN | MEGA PERFORMANCE Up until thismoment in time, the compact LED driving light space has beengrossly neglected. The only compact offerings available seemto chronically suffer from compact performance. Adding insult toinjury most look like they were penned by a guy back in the 1970swho had an extensive background in drawing construction bricks. Enter the all-new QUAD PRO.



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/round-driving-lights/stedi-8-5-type-x-sport-led-driving-lights/


A LEGENDARY BLOODLINE Any product within the STEDIoffering that wears the "PRO" nameplate represents the very best inits class - You only have to look at our iconic TYPE-X & ST3303PRO, which are both the ultimate nod to the PRO standard. The all-new QUAD PRO utilizes the same legendary TYPE-X PRO DNA.Yes! The same reflector, same LED, all buttoned up into compactyet explosive performance package.CUSTOMISABLE LIKE NO OTHER

Included in the kit is a pair of STEDI blackout cover, plus orangeand grey colour customisation caps. The iconic STEDI Smileycovers are available to purchase separately, as are optional blue,



green, red, and yellow colour caps.

DETAILS

Registered Design 202013629 The compact housing design offersendless possibilities in terms of mounting locations. We think theseare going to be hugely popular as roof-mounted arrays and on bullbars with minimal clearance like the AFN bars. KEY FEATURES

Includes our legendary Easy-Fit plug and play high beam



wiring harnessIP68 Ingress protection means our QUADS are 100%immersible in water and dust-tight.5700K Colour temperature provides just the right amount ofwarmth to cut-through air-born particles.Environmentally sealed Deutsch DT-2 connectorsRFI and EMI suppressed circuit design, which means nointerference with radio or communications equipment.High-Pressure Die-Cast BracketSpread and Spot beam reflectors built-in.

The price quoted is for a pair & includes our legendary Plug & PlaySmart Wiring harness.

SPECIFICATIONS





POWER DRAW 97W (each)

CANDELA 693,889cd






WEIGHT 1.4Kg (Including cover) (each)

PHOTOMETRIC DATA

10 M 6,938 Lx

50 M 277 Lx

200 M 17 Lx

300 M 7.7 Lx

400 M 4 Lx

500 M 2.7 Lx

833 M 1 LxRead More


Product Description



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/round-driving-lights/stedi-quad-pro-led-driving-lights/


STEDI 8.5" Type-X Pro LED Driving Lights

1.15KM BEAM DISTANCEMARKET LEADING!

THE PRO STANDARD You only need one glance to realize thatthe sky was the limit when designing the STEDI TYPE-X ™ PRO (Registered Design Number 201814836 & Registered Trademark)

Back in 2016, we released the original Type-X™ and completelydisrupted the high-performance driving light market. If you haven’theard about the legendary reputation of V1.0 TYPE-X™, start bychecking out the Youtube comparisons. With the introduction of ourPRO Edition, we are yet again redefining the auxiliary driving lightcategory. Our all-new Type-X™ PRO edition epitomizes ourcommitment to maximizing light output and reliability at levels thatsurpass the most respected players in the industry.

1.15KM



BEAM THROW Using the latest optic simulation modeling, thereflector geometry was tweaked over and over again to achieve ahighly functional beam pattern. No doubt the attention grabber isthe unrelenting beam distance of 1.155km, however, the realstrength of our Type-X™ PRO is in mid to long-range lightdistribution that really sets it apart. An astonishing beam throwcoupled with a homogeneous wide beam will have you insist ondriving only when the sun's down.YOUR LIGHTS YOUR WAY. Pink? Green? Blue? Orange? Greyor all Black? The choice is yours. We've designed the inner ringfasteners to be independent of the main sealing structure, allowingyou to change the color that best suits you. We've included grey andorange in the kit to get you started, or if you prefer all black, simplydon't fit any ring at all. Our colored filters and iconic STEDI smilecovers are backward compatible too. Additional colors soldseparately.

A WOLF IN WOLF'S CLOTHING Forget folded steel brackets3mm 4mm or 5mm it's all yesterday's news. Type-X™ PRO is allabout pushing boundaries, the bracket system is a 10mm thick high-pressure die-cast aluminum marvel of engineering. Ribbed in all theright places to ensure no vibration and no prospect for fatigue. OurType-X™ PRO bracket was designed to withstand extreme andprolonged corrugations time and time again. True to STEDI'ssignature design principles we’ve added brushed stainless steelshoulder plates, which will look just as comfortable on a tricked out70 series as it will be mounted to a PRO race buggy.PROPER TESTED PHOTOMETRIC DATA Don’t confuse our Isolux and Lumens with the baseless numberscirculating around the internet. Our published specifications arecomprehensively tested by a photometric laboratory. We stand byour photometric data.



DETAILS

ALWAYS ON THE CUTTING EDGE. Cutting edge performancestarts with cutting-edge LED technology. To achieve genuinecategory-leading performance our Type-X™ Pro is equipped with37 x Oslon High-Flux LEDs, selected for having the #1 highestlumen density per mm2 of any other comparable LED on the



market. Compared to the two other leading spotlights brand's similarofferings, the LEDs used in Type-X™ PRO have + 23% and +42%higher lumen density per mm2 in comparison. The net result ishigher net light volume and unrivaled beam throw. A WOLF IN WOLF’S CLOTHING The hard-coated optical grade lens shares thesame DNA as ballistic glass making it virtually indestructible. A UVstabilizer has also been added to ensure our lenses truly withstandthe test of time with no discoloring or UV degradation. This hasallowed us to do away with any secondary lens covers or filterswhich are known to significantly reduce light transmission. ICONIC PERFORMANCE Using the latest optic simulationmodeling, the reflector geometry was tweaked over and over againto achieve a highly usable beam pattern. No doubt the attentiongrabber is the unrelenting beam distance of 1,155m (tested in pairs,combo beam), however, the real strength of our Type-X™ PRO is inmid to long light distribution that really sets it apart. Our key focuswas on driver confidence, by increasing the beam throw the driverhas longer analysis time. We maximized driver comfort bysmoothing out the beam eliminating shadows. We reduced the lightwasted in unimportant zones like treetops and immediately in frontof the vehicle. The result is a homogeneous, unrelenting beam thatwill support you well in any adventure. Unlike our competitors, eachType-X™ PRO lamp has 6 built-in flood reflectors for improvedlight distribution out into the road shoulders. The built-in wide-beamreflector eliminates the need to add any wide beam covers, whichare not only less efficient at distributing light, covers also withholdvaluable light transmission.



SPECIFICATIONS





POWER DRAW 137W

CANDELA 1,334,025cd







PHOTOMETRIC DATA

10 M 13,340 Lx

50 M 533 Lx

200 M 33 Lx

300 M 14 Lx



400 M 8 Lx

1,000 M 1.3 Lx



Product Description

STEDI ST1K 13.5" E-Mark LED Light Bar

THE NITTY GRITTY.

THE NERDY STUFF

20 x 5W OSRAM LEDsRFI and EMI suppression circuit. Guaranteed to not interferewith Radio or GPS EquipmentIP68 - Submersible to 3mEnvironmentally sealed Deutsch DT-2 connectorsInnovative hooded opticsDriving Beam E mark compliant beam.Heavy Duty Adjustable Bottom Mounts & Side bracketincluded.Reverse Polarity Protected Circuit (RPPC)Electronic Thermal ManagementBuilt-in Voltage Surge Protection

TECH SPECS

LED Manufacturer OSRAM

LED COUNT 12

VOLTAGE 9V - 32V

CURRENT DRAW(AMPERES)

4.0a @13.6v



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/round-driving-lights/stedi-8-5-type-x-pro-led-driving-lights/


LENS MATERIALOPTICAL GRADE, HARDCOATED LEXAN

RAW LUMENS 3,552Lm

PEAK INTENSITY(CANDELA)

134,435cd

HOUSING MATERIALA360.0 Cast face plate, extrudedAluminum heat sink

LIFESPAN 50,000

FLOOD BEAM 50°

SPOT BEAM 9°

INGRESS PROTECTION IP68

OPERATING TEMP -40C ~ +150C

WEIGHT 0.845kg

Read More


Product Description

STEDI ST1K 21.5" E-Mark LED Light Bar

THE NITTY GRITTY.

THE NERDY STUFF

20 x 5W OSRAM LEDsRFI and EMI suppression circuit. Guaranteed to not interferewith Radio or GPS EquipmentIP68 - Submersible to 3mEnvironmentally sealed Deutsch DT-2 connectorsInnovative hooded opticsDriving Beam E mark compliant beam.



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/light-bars/stedi-st1k-13-5-e-mark-led-light-bar/


Heavy Duty Adjustable Bottom Mounts & Side bracketincluded.Reverse Polarity Protected Circuit (RPPC)Electronic Thermal ManagementBuilt-in Voltage Surge Protection

INCLUDES: Our high current Easy-Fit Plug & Play WiringHarness. (Switch, Fuse, Relay HB3 and H4 high-beam piggy backadaptors)

TECH SPECS

LED Manufacturer OSRAM

LED COUNT 20

VOLTAGE 9V - 32V


8.0a @13.6v

LENS MATERIAL OPTICAL GRADE, MAKROLON

RAW LUMENS 5,920Lm


219,792cd


LUMEN MAINTENANCE 50,000 (LM80)



WEIGHT 1.290kg



Read More


Product Description

STEDI Curved 21.5" ST2K Super Drive 8LED Light Bar

THE NITTY GRITTY.

ADVANTAGES OF A LATERAL SPOT BEAM

Excellent well rounded mid to long-range illuminationSignificantly minimizes adverse reflection from road signsEliminates light wasted on illuminating tree tops (won’tdisturb sleeping koalas)An excellent alternative to HID, without the associateddownsidesThe beam is 90m wide at approx 250m

KEY FEATURES

LED Parking / Position Light FunctionBreather allows pressure equalization when rapid heat up andcool down cycles occur.Anodized Polyester Powder CoatWeatherproof Deutsch® DT2 Connector.Includes adjustable side bracketsIncludes our Easy-Fit Plug & Play High Beam Wiring Harnesswith HB3 & H4 adapter (Compatible with both negative andpositive switched vehicles.Protected against reverse polarityShockproof, IP68 waterproof, UV ShieldedProtected against RFI / EMC InterferenceVoltage & current surge protection



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/light-bars/stedi-st1k-21-5-e-mark-led-light-bar/


Pulse Width Modulation Thermal Management

TECH SPECS

MAIN BEAM LED COUNT 8 x 15W

VOLTAGE 12V & 24V


LUMENS 8,000

HOUSING MATERIAL 6063 EXTRUSION

AMPERES 8.1A @ 13.2v

LIFESPAN 50,000

BEAM DRIVING BEAM


OPERATING TEMP -40ËšC ~ +150ËšC

WEIGHT 2.845kg

CERTIFICATES E-Mark R10 | CE ?



Read More


Product Description

STEDI Curved 31" ST2K Super Drive 12LED Light Bar

THE NITTY GRITTY.



KEY FEATURES




https://www.dentsnall4x4accessories.co.za/catalogue/lighting/light-bars/stedi-curved-21-5-st2k-super-drive-8-led-light-bar/



TECH SPECS


VOLTAGE 12V & 24V


LUMENS 12,000



LIFESPAN 50,000

SPOT BEAM DRIVING BEAM



WEIGHT 3.645kg




Read More


Product Description


THE NITTY GRITTY.



KEY FEATURES




https://www.dentsnall4x4accessories.co.za/catalogue/lighting/light-bars/stedi-curved-31-st2k-super-drive-12-led-light-bar/



TECH SPECS


VOLTAGE 12V & 24V


LUMENS 16,000



LIFESPAN 50,000




WEIGHT 4.795kg




Read More


Product Description


THE NITTY GRITTY.



KEY FEATURES







TECH SPECS


VOLTAGE 12V & 24V


LUMENS 20,000



LIFESPAN 50,000




WEIGHT 5.790kg




Read More


Product Description

STEDI Marine White Boat Curved 31" ST2K12 LED Light Bar

THE NITTY GRITTY.



KEY FEATURES

LED Parking / Position Light FunctionBreather allows pressure equalization when rapid heat up andcool down cycles occur.Anodized Polyester Powder CoatWeatherproof Deutsch® DT2 Connector.Includes adjustable side bracketsProtected against reverse polarityShockproof, IP68 waterproof, UV ShieldedProtected against RFI / EMC InterferenceVoltage & current surge protectionPulse Width Modulation Thermal Management





TECH SPECS


VOLTAGE 12V & 24V


LUMENS 12,000



LIFESPAN 50,000




WEIGHT 3.645kg

CERTIFICATES E-Mark R10 | CE ?Read More


Product Description

STEDI ST3K 51.5" 50 LED Slim LED LightBar

THE NITTY GRITTY.

MARKET LEADING PERFORMANCE. ST3K-50L features 50 ofOSRAM’s® finest OSLON® LED, selected for unrivaledefficiency. 10 Flood + 30 Spot + 10 Flood reflector distributionforms a remarkable beam that pushes the wide beam out at 50° andspot beam at 5.8° all the way to staggering 1 lux @ 778m True



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/light-bars/stedi-marine-white-boat-curved-31-st2k-12-led-light-bar/


White 5700K Colour temperature offers stunning clarity anddefinition. Our Pure-Drive™ circuit design allow 97% of inputpower to go directly to LEDs. BUILT TO WITHSTAND THE RELENTLESS PUNISHMENT OF THE DEEP AUSTRALIAN OUTBACK. Finished in 100% Polyester UV and abrasion resistantpowder coat, ensures that our bars will never discolour. PressureEqualization vent | Protects against water ingress, dust &contaminants. IP68 | Dust & Particle tight + Water-proof up to 3meters! Environmentally sealed Deutsch ® DT-2 connector.Protected against EMC and RFI. Ultra-Low 51mm profile withoutthe side brackets & 63mm with side brackets! Includes our Easy FitHigh Beam Plug and Play Wiring Harness which includes H4 and HB3 Adapters making for an easy connection to high beam. Unlikethe copycat harnesses on the market ours has built in electronicsmaking our harness compatible with even the most modern andsophisticated wiring systems Backed by a 5 Year ReplacementWarranty.

TECH SPECS

LED 50 x Osram Oslon White

Effective Lumen 10,250Lm

Peak Intensity (Candela) 608,000cd

Operating Voltage 10-30V DC

IP Rating IP68

Current Draw 11.2A @ 13.6v

Colour Temperature (CCT) 5700 Kelvin

Housing Material Aluminium Extrusion & Cast

Lens GE™ Lexan

Mounting Bracket Powder Coated 3mm Stainless Steel

Bolts and FIttings 3 Series Stainless Steel

Beam Type Flood Spot Combo

Life Span 50,000 Hours

Weight 4.250

Operating Environment -40 - +50° Celsius

PHOTOMETRIC DATA



10 M 6,052 Lx

50 M 242 Lx

100 M 60 Lx

200 M 15 Lx

778 M 1 Lx

Read More


Product Description


THE NITTY GRITTY.

MARKET LEADING PERFORMANCE. ST3K-10L features 10 ofOSRAM’s® finest OSLON® LED, selected for unrivalledefficiency. 2 Flood + 6 Spot + 2 Flood reflector distribution forms aremarkable beam that pushes the wide beam out at 50° and spotbeam at 5.8° all the way to staggering 1 lux @ 348m True White5700K Colour temperature offers stunning clarity and definition.Our Pure-Drive™ circuit design allows 97% of input power to go



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/light-bars/stedi-st3k-51-5-50-led-slim-led-light-bar/


directly to LEDs. BUILT TO WITHSTAND THE RELENTLESS PUNISHMENT OF THE DEEP AUSTRALIAN OUTBACK.Finished in 100% Polyester UV and abrasion resistant powder coatensures that our bars will never discolour. Pressure Equalizationvent | Protects against water ingress, dust & contaminants. IP68 |Dust & Particle tight + Water-proof up to 3 meters! Environmentallysealed Deutsch ® DT-2 connector. Protected against EMC and RFI.Backed by a 5 Year Replacement Warranty.

TECH SPECS





IP Rating IP68




Lens GE™ Lexan





Weight 1.650


PHOTOMETRIC DATA

10 M 1,211 Lx

50 M 48 Lx

100 M 12 Lx

200 M 3 Lx

348 M 1 Lx



Read More


Product Description


THE NITTY GRITTY.

MARKET LEADING PERFORMANCE. ST3K-6L features 6 ofOSRAM’s® finest OSLON® LED, selected for unrivalledefficiency. 2 Flood + 2 Spot + 2 Flood reflector distribution forms aremarkable beam that pushes the wide beam out at 50° and spotbeam at 5.8° all the way to staggering 1 lux @ 269m True White5700K Colour temperature offers stunning clarity and definition.Our Pure-Drive™ circuit design allows 97% of input power to godirectly to LEDs. BUILT TO WITHSTAND THE RELENTLESS PUNISHMENT OF THE DEEP AUSTRALIAN OUTBACK.Finished in 100% Polyester UV and abrasion resistant powder coatensures that our bars will never discolour. Pressure Equalizationvent | Protects against water ingress, dust & contaminants. IP68 |Dust & Particle tight + Water-proof up to 3 meters! Environmentally





sealed Deutsch ® DT-2 connector. Protected against EMC and RFI.Backed by a 5 Year Replacement Warranty.

TECH SPECS





IP Rating IP68




Lens GE™ Lexan


Bolts and Fittings 3 Series Stainless Steel



Weight 0.760


PHOTOMETRIC DATA

10 M 723 Lx

50 M 29 Lx

100 M 7.2 Lx

200 M 1.8 Lx

269 M 1 Lx



Read More


Product Description


THE NITTY GRITTY.

MARKET LEADING PERFORMANCE. ST3K-40L features 40 ofOSRAM’s® finest OSLON® LED, selected for unrivalledefficiency. 8 Flood + 24 Spot + 8 Flood reflector distribution formsa remarkable beam that pushes the wide beam out at 50° and spotbeam at 5.8° all the way to staggering 1 lux @ 699m True White5700K Colour temperature offers stunning clarity and definition.Our Pure-Drive™ circuit design allows 97% of input power to godirectly to LEDs. BUILT TO WITHSTAND THE RELENTLESS PUNISHMENT OF THE DEEP AUSTRALIAN OUTBACK.Finished in 100% Polyester UV and abrasion resistant powder coatensures that our bars will never discolour. Pressure Equalizationvent | Protects against water ingress, dust & contaminants. IP68 |Dust & Particle tight + Water-proof up to 3 meters! Environmentally





sealed Deutsch ® DT-2 connector. Protected against EMC and RFI.Includes our Easy-Fit High Beam Plug and Play Wiring Harnesswhich includes H4 and HB3 Adapters making for an easyconnection to high beam. Unlike the copycat harnesses on themarket, ours has built-in electronics making our harness compatiblewith even the most modern and sophisticated wiring systems Backedby a 5 Year Replacement Warranty.

TECH SPECS





IP Rating IP68




Lens GE™ Lexan





Weight 3.475kg


PHOTOMETRIC DATA

10 M 4,886 Lx

50 M 195 Lx

100 M 46 Lx

200 M 11.5 Lx

699 M 1 Lx



Read More


Product Description


THE NITTY GRITTY.

MARKET LEADING PERFORMANCE. ST3K-30L features 30 ofOSRAM’s® finest OSLON® LED, selected for unrivalledefficiency. 6 Flood + 18 Spot + 6 Flood reflector distribution formsa remarkable beam that pushes the wide beam out at 50° and spotbeam at 5.8° all the way to staggering 1 lux @ 601m True White5700K Colour temperature offers stunning clarity and definition.Our Pure-Drive™ circuit design allows 97% of input power to godirectly to LEDs. BUILT TO WITHSTAND THE RELENTLESS PUNISHMENT OF THE DEEP AUSTRALIAN OUTBACK.Finished in 100% Polyester UV and abrasion resistant powder coatensures that our bars will never discolour. Pressure Equalizationvent | Protects against water ingress, dust & contaminants. IP68 |





Dust & Particle tight + Water-proof up to 3 meters! Environmentallysealed Deutsch ® DT-2 connector. Protected against EMC and RFI.Includes our Easy-Fit High Beam Plug and Play Wiring Harnesswhich includes H4 and HB3 Adapters making for an easyconnection to high beam. Unlike the copycat harnesses on themarket, ours has built-in electronics making our harness compatiblewith even the most modern and sophisticated wiring systems Backedby a 5 Year Replacement Warranty.

TECH SPECS





IP Rating IP68




Lens GE™ Lexan







Weight 2.640


PHOTOMETRIC DATA

10 M 3,612 lX

50 M 144 Lx

100 M 36 Lx

200 M 9 Lx

601 M 1 Lx

Read More


Product Description






THE NITTY GRITTY.

MARKET LEADING PERFORMANCE. ST3K-20L features 20 ofOSRAM’s® finest OSLON® LED, selected for unrivalledefficiency. 4 Flood + 12 Spot + 4 Flood reflector distribution formsa remarkable beam that pushes the wide beam out at 50° and spotbeam at 5.8° all the way to staggering 1 lux @ 493m True White5700K Colour temperature offers stunning clarity and definition.Our Pure-Drive™ circuit design allow 97% of input power to godirectly to LEDs. BUILT TO WITHSTAND THE RELENTLESS PUNISHMENT OF THE DEEP AUSTRALIAN OUTBACK.Finished in 100% Polyester UV and abrasion resistant powder coat,ensures that our bars will never discolour. Pressure Equalizationvent | Protects against water ingress, dust & contaminants. IP68 |Dust & Particle tight + Water-proof up to 3 meters! Environmentallysealed Deutsch ® DT-2 connector. Protected against EMC and RFI.Ultra-Low 51mm profile without the side brackets & 63mm withside brackets! Includes our Easy Fit High Beam Plug and PlayWiring Harness which includes H4 and HB3 Adapters making foran easy connection to high beam. Unlike the copycat harnesses onthe market ours has built in electronics making our harnesscompatible with even the most modern and sophisticated wiringsystems Backed by a 5 Year Replacement Warranty.

TECH SPECS



Peak Intensity 243,200cd


IP Rating IP68






Lens GE™ Lexan





Weight 1.855


PHOTOMETRIC DATA

10 M 2,430 Lx

50 M 97 Lx

100 M 24 Lx

200 M 6 Lx

493 M 1 Lx

Read More


Product Description





STEDI 12" ST4K 20 LED Double RowLight Bar

THE NITTY GRITTY.

PERFORMANCE THAT LETS YOU TURN THE SUN BACK ON

STEDI ST4K-20 features 20 of OSRAM’s® finest OSLON®LED, selected for its high luminous flux and perfectly matchoptical properties.

4 Flood + 12 Spot + 4 Flood reflector distribution forms aremarkable beam that pushes the wide beam out at 50° andspot beam at 5.8° all the way to staggering 1 lux @ 468m

Crystal White 5700K Colour temperature offers stunningclarity and definition with excellent Colour Rendering Index(CRI).

Our Pure-Drive™ circuit design allow 97% of input power togo directly to LEDs.

BUILT TO GO ALL NIGHT

A360.0 Cast face plate, extruded Aluminum heat sinkg |finished in 100% Polyester UV and abrasion resistant powdercoat, ensures that our bars will never discolour.

Pressure Equalization vent with Gore® membrane | Protectsagainst water ingress, dust & contaminants.

IP68 | Dust & Particle tight + Water-proof up to 3 meters –Drown it, we insist!

Environmentally sealed Deutsch ® DT connector.

Backed by our no nonsense 5-year replacement warranty. MOUNT IT YOUR WAY We know you want flexible mounting options,which is why we’ve included two seperate mounting options.

The included adjustable sliding mounts allow you to align themount bolts to any pre-existing mounting holes. Makemounting to UHF tabs or Bull bar dech very straight forward.

Or use our 3mm thick 304 Stainless steel side brackets, whichfeature + or - 15mm height adjustment.

EASY-FIT Plug & Play High Beam Wiring Harness included. Included is our acclaimed Easy-Fit Plug and Play Wiring Harnesswith supplied H4 and HB3 Adapters, making for an easy connectionto high beam. Further unlike other brands our kit has built inelectronics making our harness compatible with even the most



modern and sophisticated wiring systems. Whether your vehicle ispositive or negatively switched our harness will work right out ofthe box without any modification whatsover. No nonsense 5 Year Replacement Warranty backed by an Australian company with bricks & mortar presence.

TECH SPECS

LED MANUFACTURER OSRAM (Oslon) ®

LED COUNT 20

VOLTAGE 12V & 24V


LUMENS 4,800 LUMENS

PEAK INTENSITY (CANDELA) 220,800cd

HOUSING MATERIALA360.0 Cast face plate,extruded Aluminum heat sink


LIFESPAN 50,000

FLOOD BEAM 50°

SPOT BEAM 5.8°




OPERATING TEMP -40°C to 60°C

WEIGHT 1.610kg

Read More


Product Description


THE NITTY GRITTY.





Our Pure-Drive™ circuit design allows 97% of input power togo directly to LEDs.




https://www.dentsnall4x4accessories.co.za/catalogue/lighting/light-bars/stedi-12-st4k-20-led-double-row-light-bar/


A360.0 Cast face plate, extruded Aluminum heat sink |finished in 100% Polyester UV and abrasion resistant powdercoat, ensures that our bars will never discolour.




Backed by our no-nonsense 5-year replacement warranty. MOUNT IT YOUR WAY We know you want flexible mounting options,which is why we’ve included two separate mounting options.

The included adjustable sliding mounts allow you to align themount bolts to any pre-existing mounting holes. Makemounting to UHF tabs or Bullbars very straight forward.


EASY-FIT Plug & Play High Beam Wiring Harness included. Included is our acclaimed Easy-Fit Plug and Play Wiring Harnesswith supplied H4 and HB3 Adapters, making for an easy connectionto high beam. Further unlike other brands, our kit has built-inelectronics making our harness compatible with even the mostmodern and sophisticated wiring systems. Whether your vehicle ispositive or negatively switched our harness will work right out ofthe box without any modification whatsoever. No nonsense 5 Year Replacement Warranty backed by an Australian company which has a bricks & mortar presence.

TECH SPECS




LED COUNT 40

VOLTAGE 12V & 24V


LUMENS 9,600 LUMENS




LIFESPAN 50,000

FLOOD BEAM 50°

SPOT BEAM 5.8°



WEIGHT 2.880kgRead More





Product Description


THE NITTY GRITTY.

















EASY-FIT Plug & Play High Beam Wiring Harness included. Included is our acclaimed Easy-Fit Plug and Play Wiring Harnesswith supplied H4 and HB3 Adapters, making for an easy connectionto high beam. Further unlike other brands our kit has built inelectronics making our harness compatible with even the mostmodern and sophisticated wiring systems. Whether your vehicle ispositive or negatively switched our harness will work right out ofthe box without any modification whatsover. No nonsense 5 Year Replacement Warranty backed by an Australian company which has a brick & mortar presence.

TECH SPECS


LED COUNT 60

VOLTAGE 12V & 24V


LUMENS 14,400 LUMENS




LIFESPAN 50,000

FLOOD BEAM 50°

SPOT BEAM 5.8°



WEIGHT 4.150kg



Read More


Product Description


THE NITTY GRITTY.



12 Flood + 56 Spot + 12 Flood reflector distribution forms aremarkable beam that pushes the wide beam out at 50° and





spot beam at 5.8° all the way to staggering 1 lux @ 936m







Environmentally sealed Deutsch ® DTP connector.







TECH SPECS


LED COUNT 80

VOLTAGE 12V & 24V






LIFESPAN 50,000

FLOOD BEAM 50°

SPOT BEAM 5.8°



WEIGHT 5.430kg



Read More


Product Description


THE NITTY GRITTY.



16 Flood + 65 Spot + 16 Flood reflector distribution forms aremarkable beam that pushes the wide beam out at 50° andspot beam at 5.8° all the way to staggering 1 lux @ 1,025m
















TECH SPECS


LED COUNT 96

VOLTAGE 12V & 24V



PEAK INTENSITY (CANDELA) 1,059,840cd





LIFESPAN 50,000

FLOOD BEAM 50°

SPOT BEAM 5.8°



WEIGHT 6.425kg

Read More


Product Description


THE NITTY GRITTY.

PERFORMANCE THAT LET’S YOU TURN THE SUN BACK ON

STEDI ST4K-100 features 100 of OSRAM’s® finestOSLON® LED, selected for its high luminous flux and





perfectly match optical properties.

16 Flood + 68 Spot + 16 Flood reflector distribution forms aremarkable beam that pushes the wide beam out at 50° andspot beam at 5.8° all the way to staggering 1 lux @ 1,050m


Our Pure-Drive™ circuit design allows 97% of input power togo directly to LEDs.


A360.0 Cast face plate extruded Aluminium heat sink|finished in 100% Polyester UV and abrasion resistant powdercoat, ensures that our bars will never discolour.




Backed by our no-nonsense 5-year replacement warranty. MOUNT IT YOUR WAY We know you want flexible mounting options,which is why we’ve included two separate mounting options.



EASY-FIT Plug & Play High Beam Wiring Harness included. Included is our acclaimed Easy-Fit Plug and Play Wiring Harnesswith supplied H4 and HB3 Adapters, making for an easy connectionto high beam. Further unlike other brands, our kit has built-inelectronics making our harness compatible with even the mostmodern and sophisticated wiring systems. Whether your vehicle ispositive or negatively switched our harness will work right out ofthe box without any modification whatsoever. No nonsense 5 Year Replacement Warranty backed by an Australian company which has a brick & mortar presence.



TECH SPECS


LED COUNT 100

VOLTAGE 12V & 24V



PEAK INTENSITY (CANDELA) 1,104,000cd


AMPERES 23.4.2A @ 13.6v

LIFESPAN 50,000

FLOOD BEAM 50°

SPOT BEAM 5.8°


OPERATING TEMP --40°C to 60°C

WEIGHT 6.620kg



Read More


Product Description

STEDI 8" ST4K 12 LED Double Row Light

THE NITTY GRITTY.







A360.0 Cast face plate, extruded Aluminum heat sink|finished in 100% Polyester UV and abrasion resistant powdercoat, ensures that our bars will never discolour.


IP68 | Dust & Particle tight + Water-proof up to 3 meters –





Drown it, we insist!


Backed by our no nonsense 5-year replacement warranty. MOUNT IT YOUR WAY We know you want flexible mounting options,which is why we’ve included two separate mounting options.



EASY-FIT Plug & Play High Beam Wiring Harness included. Included is our acclaimed Easy-Fit Plug and Play Wiring Harnesswith supplied H4 and HB3 Adapters, making for an easy connectionto high beam. Further unlike other brands our kit has built inelectronics making our harness compatible with even the mostmodern and sophisticated wiring systems. Whether your vehicle ispositive or negatively switched our harness will work right out ofthe box without any modification whatsoever. No nonsense 5 Year Replacement Warranty backed by an Australian company which has a brick & mortar presence.

TECH SPECS


LED COUNT 12

VOLTAGE 12V & 24V



LUMENS 2,880 LUMENS


AMPERES 2.5A @ 13.6v | 1.1A @ 24v



LIFESPAN 50,000

FLOOD BEAM 50°

SPOT BEAM 5.8°



WEIGHT 1.020kg

Read More


Product Description



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/light-bars/stedi-8-st4k-12-led-double-row-light/



DETAILS











MOUNT IT YOUR WAY We know you want flexible mountingoptions, which is why we’ve included two separate mountingoptions.

The included adjustable sliding mounts allow you to align themount bolts to any pre-existing mounting holes. Makemounting to UHF tabs or Bull bar deck very straight forward.


EASY-FIT Plug & Play High Beam Wiring Harness included. Included is our acclaimed Easy-Fit Plug and Play Wiring Harnesswith supplied H4 and HB3 Adapters, making for an easy connectionto high beam. Further unlike other brands our kit has built inelectronics making our harness compatible with even the most



modern and sophisticated wiring systems. Whether your vehicle ispositive or negatively switched our harness will work right out ofthe box without any modification whatsoever.

SPECIFICATIONS


LED COUNT 24

VOLTAGE 12V & 24V


LUMENS 5,760 LUMENS

PEAK INTENSITY (CANDELA) 264960cd



LIFESPAN 50,000

FLOOD BEAM 50°

SPOT BEAM 5.8°

INGRESS PROTECTION IP69K






Product Description

STEDI 28" 52 LED ST4K Double RowLight Bar

THE NITTY GRITTY.












The included adjustable sliding mounts allow you to align the





mount bolts to any pre-existing mounting holes. Makemounting to UHF tabs or Bull bar dech very straight forward.


EASY-FIT Plug & Play High Beam Wiring Harness included. Included is our acclaimed Easy-Fit Plug and Play Wiring Harnesswith supplied H4 and HB3 Adapters, making for an easy connectionto high beam. Further unlike other brands our kit has built inelectronics making our harness compatible with even the mostmodern and sophisticated wiring systems. Whether your vehicle ispositive or negatively switched our harness will work right out ofthe box without any modification whatsover. No nonsense 5 Year Replacement Warranty backed by an Australian company which has a bricks & mortar presence.

TECH SPECS


LED COUNT 52

VOLTAGE 12V & 24V






LIFESPAN 50,000

FLOOD BEAM 50°

SPOT BEAM 5.8°



WEIGHT 3.660kg



Read More


Product Description

STEDI ST-X 40.5" Super Drive LED LightBar

THE BEAM PATTERNIf you're looking for a driving light thatoffers near-field spread, keep moving, this is not that. The opticalproperties of the hooded reflector design are best described as high-beam on steroids. The ST-X excels in the high-speed, high-wayapplication when mid to long-range visibility is critical.



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/light-bars/stedi-28-52-led-st4k-double-row-light-bar/


Significantly minimizes adverse reflection from road signsControlled vertical spread minimizes reflections off of high-mounted road signs.

KEY FEATURES

16x 15W LEDsLED Parking / Position Light Function (Amber or White built-in)Breather allows pressure equalization when rapid heat up andcool down cycles occurAnodized Polyester Powder CoatWeatherproof Deutsch® DTP ConnectorIncludes adjustable Side brackets & Sliding bottom bracketsIncludes our Easy-Fit Plug & Play High Beam Wiring Harnesswith HB3 & H4 adapter (Compatible with both negative andpositive switched vehicles)Protected against reverse polarityShockproof, IP68 waterproof, UV ShieldedProtected Against RFI / EMC InterferenceVoltage & current surge protectionPulse Width Modulation Thermal Management

Compatible with Ford Ranger Wildtrak FX4 Roof Light Bar Mounting Bracket for Roof Mounting.

TECH SPECS

Full Power:

E-Mark Power:



VOLTAGE 9-36V

AMPERES17.2A @ 12V (full power), 3.28A@ 12V (limit power)

POWER206.4W (full power), 39.36 (limitpower)

LUMENS8400LM (full power), 2327LM(limit power)

COLOUR TEMPERATURE 5000k

PHOTOMETRIC DATA1 lux @ 859m (full power), 1 lux @450m (limit power)

LENS MATERIALOPTICAL GRADE, HARD-COATED LEXAN



CANDELAS739582 @ full power, 203337 @limit power

CONNECTOR 60cm cable with DTP 4in


CERTIFICATES R112, ref. 50 and R10

LIFESPAN 50, 000hrs (LM80)

PRODUCT WEIGHT 3.7kg

SHIPPING WEIGHT 4.2kg



Read More


Product Description

STEDI ST3303 Pro 11" Double Row UltraHigh Output LED Bar

Registered Design: 201915829.CREE® XLamp XP-L HI undomed LEDs using CREE’sbreakthrough SC5 Technology™RFI and EMI suppression circuit. Guaranteed to not interferewith Radio or GPS EquipmentIP68 - Submersible to 3mDeutsch DT 15A connector32mm diameter parabolic reflectorsSpread and Spot beam pattern4mm thick 304 stainless steel side brackets included.Cast Alloy adjustable sliding bracket included.Nitto Denko™ Breather with PTFE microporous membraneVery heavy-duty Smart Plug & Play ADR compliant WiringHarness. (Switch, Dual Fuse, Dual Relay and HB3 and H4Piggyback Adaptors) include

Registered Design: 201915829



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/light-bars/stedi-st-x-40-5-super-drive-led-light-bar/


TECH SPECS

LED Manufacturer CREE XPL Hi

LED COUNT 12

VOLTAGE 9V - 32V


5.9a @13.6v


RAW LUMENS 13,140Lm

EFFECTIVE LUMENS 6,720Lm




360,800cd


LIFESPAN 50,000

FLOOD BEAM 50°

SPOT BEAM 9°



WEIGHT 1,295kgRead More


Product Description

STEDI ST3303 Pro 18.4" Double Row UltraHigh Output LED Bar

Registered Design: 201915829.CREE® XLamp XP-L HI undomed LEDs using CREE’sbreakthrough SC5 Technology™RFI and EMI suppression circuit. Guaranteed to not interferewith Radio or GPS EquipmentIP68 - Submersible to 3mSingle High Current Deutsch DTP-2 25A connector32mm diameter parabolic reflectorsSpread and Spot beam pattern4mm thick 304 stainless steel side brackets included.Cast Alloy adjustable sliding bracket included.Nitto Denko™ Breather with PTFE microporous membrane

Very heavy-duty Smart Plug & Play ADR compliant WiringHarness. (Switch, Dual Fuse, Dual Relay and HB3 and H4Piggyback Adaptors) include Registered Design: 201915829



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/light-bars/stedi-st3303-pro-11-double-row-ultra-high-output-led-bar/


TECH SPECS


LED COUNT 24

VOLTAGE 9V - 32V


11.9a @13.6v


RAW LUMENS 26,280Lm





435,600cd


LIFESPAN 50,000

FLOOD BEAM 50°

SPOT BEAM 9°



WEIGHT 2.250kg Read More


Product Description


CREE® XLamp XP-L HI undomed LEDs using CREE’sbreakthrough SC5 Technology™ RFI and EMI suppression circuit.Guaranteed to not interfere with Radio or GPS Equipment IP68 -Submersible to 3m High Current Deutsch DTP-2 25A connectors32mm diameter parabolic reflectors Spread and Spot beam pattern4mm thick 304 stainless steel side brackets included. Cast Alloyadjustable sliding bracket included. Nitto Denko™ Breather withPTFE microporous membrane Very heavy-duty Smart Plug & PlayADR compliant Wiring Harness. (Switch, Fuse, Relay and HB3 andH4 Piggyback Adaptors) included Registered Design: 201915829

TECH SPECS



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/light-bars/stedi-st3303-pro-18-4-double-row-ultra-high-output-led-bar/



LED COUNT 32

VOLTAGE 9V - 32V


16.4a @13.6v


RAW LUMENS 31,040Lm



474,721cd


LIFESPAN 50,000

FLOOD BEAM 50°

SPOT BEAM 9°









Product Description


KEY FEATURES

Registered Design: 201915829.CREE® XLamp XP-L HI undomed LEDs using CREE’sbreakthrough SC5 Technology™RFI and EMI suppression circuit. Guaranteed to not interferewith Radio or GPS EquipmentIP68 - Submersible to 3mHigh Current Deutsch DTP-2 25A connectors32mm diameter parabolic reflectorsSpread and Spot beam pattern4mm thick 304 stainless steel side brackets included.Cast Alloy adjustable sliding bracket included.Nitto Denko™ Breather with PTFE microporous membraneVery heavy-duty Smart Plug & Play ADR compliant WiringHarness. (Switch, Dual Fuse, Dual Relay and HB3 and H4Piggyback Adaptors) included

Registered Design: 201915829

TECH SPECS




LED COUNT 40

VOLTAGE 9V - 32V


25.3a @13.6v


RAW LUMENS 43,800Lm



656,100cd


LIFESPAN 50,000

FLOOD BEAM 50°

SPOT BEAM 9°



WEIGHT 4.960kg Read More


Product Description





STEDI ST3303 Pro 39" Double Row UltraHigh Output LED Bar

CREE® XLamp XP-L HI undomed LEDs using CREE’sbreakthrough SC5 Technology™ RFI and EMI suppression circuit.Guaranteed to not interfere with Radio or GPS Equipment IP68 -Submersible to 3m High Current Deutsch DTP-2 25A connectors32mm diameter parabolic reflectors Spread and Spot beam pattern4mm thick 304 stainless steel side brackets included. Cast Alloyadjustable sliding bracket included. Nitto Denko™ Breather withPTFE microporous membrane Very heavy-duty Smart Plug & PlayADR compliant Wiring Harness. (Switch, Dual Fuse, Dual Relayand HB3 and H4 Piggyback Adaptors) include Registered Design: 201915829

TECH SPECS



LED Manufacturer CREE XP-L Hi

LED COUNT 60

VOLTAGE 9V - 32V


36.7a @13.6v


RAW LUMENS 65,700Lm

EFFECTIVE LUMENS 33,600LM


919,681cd


LIFESPAN 50,000

FLOOD REFLECTORS 24

SPOT REFLECTORS 36





Product Description

STEDI ST3301 Pro 18.6" 12 LED Light Bar

DETAILS



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/light-bars/stedi-st3303-pro-39-double-row-ultra-high-output-led-bar/


Unmistakable performance. Unmistakably STEDI. For almost adecade, the name STEDI has stood for cutting-edge design andmarket-leading performance. STEDI has continued to keep at theforefront of LED lighting, making STEDI the leading brand bornright here in Australia. Unquestionably, ST3301 PRO sits at thepinnacle of the STEDI offering. A pure expression of capability anddesign that converges with brutal performance, making the all-newST3301 PRO a quintessential component for any LED aficionado. KEY TECHNICAL BREAKDOWN

Ingress Protection IP68 (Backed by a certificate ofconformity),Coordinated Colour Temperature 5600K - Excellent colourcontrast.Flood/spot/flood combination with 12 x LEDs2 Flood + 8 Spot + 2 Flood Reflector DistributionTough GE Lexan primary lens which 250 times the impact-resistant strength of glass and 30 times stronger than acrylicPoly-carbonate.Waterproof Deutsch DT ConnectorAdjustable Slide mounts and stainless steel side bracketsincluded.Guaranteed against electromagnetic (EMC) and radiofrequency (RFI) interference

SPECIFICATIONS



LUMEN 10, 320Lm (RAW)

PEAK INTENSITY (CANDELA) Coming Soon cd

OPERATING VOLTAGE 10-45V DC

WATERPROOF RATE IP 68

LED 12 x OSRAM™

COLOUR TEMPERATURE 5600K

MATERIAL Die-Cast Aluminium

LENS GE Lexan™

MOUNTING BRACKET Aluminium

BOLTS AND FITTINGS 3 Series Stainless Steel

FLOOD BEAM ANGLE 45° Degrees

SPOT BEAM ANGLE 11° Degrees


WEIGHT 1.925kg

CURRENT DRAW Coming Soon 6.6A @ 13.6v

Read More


Product Description

STEDI ST3301 Pro 41" 28 LED Light Bar

THE NITTY GRITTY.




https://www.dentsnall4x4accessories.co.za/catalogue/lighting/light-bars/stedi-st3301-pro-18-6-12-led-light-bar/


Ingress Protection IP68 (Backed by a certificate ofconformity),Coordinated Colour Temperature 5600K - Excellent colourcontrast.Flood/spot/flood combination with 18 x LEDs4 Flood + 18 Spot + 4 Flood Reflector DistributionTough GE Lexan primary lens which 250 times the impact-resistant strength of glass and 30 times stronger than acrylicPoly-carbonate.Waterproof Deutsch DT-P ConnectorAdjustable Slide mounts and stainless steel side bracketsincluded.Guaranteed against electromagnetic (EMC) and radiofrequency (RFI) interference

We are so confident you will love this product, price, quality, andperformance, we are offering a FULL 5 YEAR WARRANTY!

TECH SPECS



Lumen 23,800Lm (RAW) 11,850Lm (Effective)



Waterproof Rate IP 68

LED 28 x OSRAM

Colour Temperature 5600K

Material Die-Cast Aluminium

Lens GE Lexan

Mounting Bracket Aluminium


Flood Beam Angle 45°C Degrees

Spot Beam AngleÂ 11°C Degrees

Lumen Maintenance 50,000 LM-80

Weight 4.9kg

Current Draw 12.3A @ 13.6vRead More


Product Description



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/light-bars/stedi-st3301-pro-41-28-led-light-bar/


STEDI ST3301 Pro 7.5" 4 LED Work Light

Dimensions:

THE NITTY GRITTY.

KEY TECHNICAL BREAKDOWN

Ingress Protection IP68 (Backed by a certificate ofconformity),Coordinated Colour Temperature 5500K - Excellent colourcontrast.4 x CREE™ XM-L2 LEDs4 Flood ReflectorsTough GE Lexan primary lens which 250 times the impact-resistant strength of glass and 30 times stronger than acrylicPoly-carbonate.Waterproof Deutsch DT-2 ConnectorStainless steel side bracket included, with optional bottommount sold separately.Guaranteed against electromagnetic (EMC) and radiofrequency (RFI) interference

TECH SPECS

Lumen Flux 3,440Lm


IP Rating IP68

LED 4 x OSRAM™

Colour Temperature (CCT) 5600K

Material Die-Cast Aluminium Housing

Lens GE Lexan™

Mounting Bracket 3mm 304 Stainless Steel




Beam Type 45° Flood

Amp Draw 2.4A @ 13.6v



Product Description

STEDI ST3301 Pro 4.6" 2 LED Work Light

Dimensions:

THE NITTY GRITTY.

KEY TECHNICAL BREAKDOWN

Ingress Protection IP68 (Backed by a certificate ofconformity),Coordinated Colour Temperature 5600K - Excellent colorcontrast.2 Flood Reflector DistributionTough GE Lexan primary lens which 250 times the impact-resistant strength of glass and 30 times stronger than acrylicPoly-carbonate.Waterproof Deutsch DT ConnectorAdjustable Slide mounts and stainless steel side bracketsincluded.Guaranteed against electromagnetic (EMC) and radiofrequency (RFI) interference



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/light-bars/stedi-st3301-pro-7-5-4-led-work-light/


TECH SPECS

Lumen 1,720Lm (RAW)

Peak Intensity (Candela) Coming Soon



LED 2 x OSRAM™



Lens GE Lexan™

Mounting Bracket Aluminum


Flood Beam Angle 45° Degrees


Weight 600g



Product Description


Read More


Product Description



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/light-bars/stedi-st3301-pro-4-6-2-led-work-light/






Ingress Protection IP68 (Backed by a certificate ofconformity),Coordinated Colour Temperature 5600K - Excellent colourcontrast.Flood/spot/flood combination with 18 x LEDs4 Flood + 10 Spot + 4 Flood Reflector DistributionTough GE Lexan primary lens which 250 times the impact-resistant strength of glass and 30 times stronger than acrylicPoly-carbonate.Waterproof Deutsch DT ConnectorAdjustable Slide mounts and stainless steel side bracketsincluded.Guaranteed against electromagnetic (EMC) and radiofrequency (RFI) interference

We are so confident you will love this product, price, quality, andperformance, we are offering a 30-day money-back guarantee and a FULL 5 YEAR WARRANTY!

TECH SPECS



Lumen 15,300Lm (RAW) 8,250Lm (Effective)




LED 18 x OSRAM™



Lens GE Lexan

Mounting Bracket Aluminium


Flood Beam Angle 45° Degrees

Spot Beam Angle 11° Degrees


Weight 2.800kg



Product Description





STEDI Universal Type-C LED Fog LightUpgrade (TJM T13 & Rhino 4x4)

KEY TECHNICAL DETAILS These LED fog lights are a direct fitthat uses your factory mounting points in behind the standard frontbumper, and some aftermarket bull bars listed below. The projectorlens optic distributes a very flat and extremely wide pattern which isDOT and ECE standard compliant for road use. Once installed we recommend that the beam is adjusted to ensure that it cuts off no higher than 50cm from the ground, with the car 25m away from a wall. Please check below for a full list of compatible vehicles.

BULL BARS

TJM: T13 Bull Bars with halogen fog lights T13Rhino 4x4: Bull Bars

TECH SPECS

HOUSING MATERIAL Alloy Heat Sink

LED High Performance Luxeon T LED

COMPATIBLE VOLTAGE 12v and 24v

LIFESPAN 50,000hours

CONNECTOR TYPE Sealed

CERTIFICATION CE, E4, RoHs, R87, IP67

FOG LIGHT DRAW 0.5a @ 13.6v

DIAMETER 90mm

OEM PART NO#OE No.: 81210-0W050, 81220-0W040 OE No.: 81210-0W070,81220-0W070

Read More

Categories: LED Conversion Kits

Product Description



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/led-conversion-kits/stedi-universal-type-c-led-fog-light-upgrade-tjm-t13-rhino-4x4/

https://www.dentsnall4x4accessories.co.za/product-category/lighting/led-conversion-kits/

STEDI Universal Type-A LED Fog LightUpgrade

KEY TECHNICAL DETAILS If you're looking for an OEM likeLED upgrade, look no further down our Type A fog light which hasmounting brackets to suit a wide range of factory fog lamp housing.The projector lens optic distributes a very flat and extremely widepattern which is DOT and ECE standard compliant for road use. Once installed we recommend that the beam is adjusted to ensure that it cuts off no higher than 50cm from the ground, with the car 25m away from a wall. Please check below for a full list of compatible vehicles.

COMPATIBLE VEHICLES

CITROEN

DS5: 2012 - 2017DS4: 2011BERLINGO: 2012 - 2017C-CROSSER: 2007 - 2017C4: 2004 -2009C4 PICASSO: 2006 - 2007C4 PICASSO: 2011C5: 2001 - 2007C-QUATRE: 2009

FORD

C-MAX: 2010 - 2017ECOSPORT: 2013 - 2017EXPLORER: 2011 - 2015FIESTA: WQ - WP 1/2004 - 8/2008 including XR4FOCUS: LT 5/2007 - 3/2009 Fits XXR5 from 2/2008 to12/2011FREESTYLE: 2005 - 2007FALCON FG: Series 2/2008 - 2013 (XT, XR6, XR8, G6 &G6E) TERRITORY SZ: 6/2011 - 2013 (Excluding Titanium Model)FUSION: 2014 - 2017MUSTANG: 2015 - 2017RANGER: PX1 + PX2 2012 - Current (Not includingWildtrak PX2)TAURUS X: 2008 - 2009TRANSIT: 2/2006 onwardsTRANSIT CONNECT: 2011 - 2013



HOLDEN

COMMODORE: VE 6/2006 to 9/2010 (Series 1)

HONDA

CITY: 2014 - 2016CR-V: 2012 - 2014CR-Z: 2013 - 2015JAZZ: 2014 - 2017

INFINITI

EX35: 2008 - 2012EX37: 2013 - 2017FX35: 2006 - 2012FX45: 2006 - 2008FX37: 2013 - 2017FX50: 2009 - 2011G25: 2011 - 2012G37: 2009 -2013M35: 2012M37: 2011 - 2012M56: 2012QX56: 2011 - 2012Q70: 2014 - 2017QX70: 2014 - 2017

JAGUAR

X-TYPE: 2004S-TYPE: 2005 - 2009

LAND ROVER

FREELANDER 2: 2007DISCOVERY 4

MAZDA

BT-50: 2012 - present

MERCEDES BENZ

CITAN W415: 2012 - 2017



MITSUBISHI

ASX: 2010 - 2017MIRAGE: 2013 - 2017OUTLANDER: 2005 - 2007OUTLANDER: 2010 - 2011OUTLANDER: 2012 - 2017PAJERO: NS / NT 7/2006 - 9/2011PAJERO SPORT 2015 - CurrentTRITON: 2010 - present

NISSAN

CUBE: 2009 - 2014JUKE: 2010 - 2014MURANO: 2008 - 2014NV200: 2010 - 2017PATROL: 2004 - 2009PATROL: 2010 - 2017QASHQAI: 2014 - 2017TIIDA: 2006 - 2017LEAF: 2011 - 2017NAVARA D40: 2010 - 2013PATHFINDER: 2004 - 2012

OPEL

AGILA: 2008ASTRA G: 1998 - 2003ASTRA H: 2004 - 2009VECTRA: 2005 - 2008

PEUGEOT

4007: 2007 - 2017207: 2006 - 2008301: 2013307: 2005 - 2006407: 2005 - 2008

PORSCHE

CAYENNE: 2011 - 2014



RENAULT

LATITUDE: 2011CAPTUR: 2013 - 2017LOGAN: 2008MEGANE: 2002 - 2009

SUBARU

Subaru XV 2011 - 20172012-2014 Subaru BRZ2013-2014 Subaru Forester2014+ Subaru Liberty2010-2012 Subaru Outback2010-2012 Subaru Impreza (not WRX/STi, and requires H16adapter)2012-2013 Subaru WRX/STiWRX/STi 2015+

SUZUKI

ALTO: 2008 - 2017A-STAR: 2009 - 2017ALIVIO: 2014 - 2017GRAND VITARA: 2005 - 2017SPLASH: 2007 - 2017SWIFT: 2006 - 2017SX4: 2008 - 2017VITARA: 2006 - 2017JIMNY: 2000 - 2018 (Third Generation)

TOYOTA

FT 86: 2012 - 2017GT 86: 2012 - 2017SCION FRS: 2012 - 2017

TECH SPECS


LED Luxeon T LED








DIAMETER 90mm

OEM PART NO#26150-89906-21 / 26150-8993B /26150-8990B / 26150-8992B /26150-8994B 51858824 / 9670955280 / 33900-STK-A11 R: 33900-TY0-003 + L: 33950-TY0-003 84501-FJ000 / SU003-02518 /A4158200356 / 26150-3NA0A / 84503-FJ000 / 8321A36 / 6208Q38321A034 / 8321A144 / MN142091 / LR001587 / 6208F9 R:8321A902 + L: 8321A901 26150-3XA0A / 26155-00Q0A / 26150-VD30A 35500-63J00 / 35500-63J02 / 5500-63J03 8200074008 /5001874722 / 8321A097 / 4709052 / 088358 1209177 / 1209077 /6710027 / 620662 / 620639 / 6206E1 UC2T51680 / 4F9Z 15200 AA

Read More


Product Description

STEDI Universal Type-B LED Fog LightUpgrade

KEY TECHNICAL DETAILS These LED fog lights are a direct fitwhich uses your factory mounting points in behind the standardfront bumper, and some aftermarket bull bars listed below. Theprojector lens optic distributes a very flat and extremely widepattern which is DOT and ECE standard compliant for road use. Once installed we recommend that the beam is adjusted to ensure that it cuts off no higher than 50cm from the ground, with the car 25m away from a wall. Please check below for a full list of compatible vehicles.

COMPATIBLE VEHICLES:

LEXUS

LX570: 2008 - 2011IS-F: 2008 - 2013HS250H: 2010 - 2012RX270 / RX350 / RX450: 2010 - 2015GS350: 2013 - 2015LX570: 2013 - 2017

TOYOTA

4 RUNNER: 2014 - 2017AURION: 2007 - 2017



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/led-conversion-kits/stedi-universal-type-a-led-fog-light-upgrade/


AURIS: 2007 - 2017AVALON: 2008 - 2010CAMRY: 7/2006 - 11/2011CAMRY HYBRID: AHV40 2010 - 2011COROLLA: 3/2007 to 2013FORTUNER: 2015 - 2017KLUGER: 2007 - 2017N80 (Revo) HILUX: 2016 - 2019N70 (Vigo) HILUX: 2012 - 2015 (face-lift) LANDCRUISER PRADO 150: 2009 - 2020LANDCRUISER 200 SERIES: 2016 - 2020PRIUS: 2009 - 2015PRIUS C: 2012 - 2017RAV 4: 2006 - 2011RAV 4: 2016 - 2017TUNDRA: 2013 - 2017YARIS: 2014 - 2017

PEUGEOT

206: 1998 - 2005206 SPORT: 1998 - 2005

TECH SPECS


LED High Performance Luxeon T LED






DIAMETER 90mm

OEM PART NO#R: 81210-0D040 + L: 81220-0D040 / R: 81210-0D041 + L: 81220-0D041 R: 81210-0D042 + L: 81220-0D042 / R: 81210-06052 + L:81220-06050 R: 35501-57L00 + L: 35502-57L01 / R: 81210-06071+ L: 81220-06071 R: 81025-0W020 + L: 81026-0W020 / R: 81211-12230 + L: 81221-12230 R: 81210-12230 + L: 81220-12230 / R:81210-0D110 + L: 81220-0D110 R: 81210-02110 + L: 81220-02110

Read More




https://www.dentsnall4x4accessories.co.za/catalogue/lighting/led-conversion-kits/stedi-universal-type-b-led-fog-light-upgrade/


Product Description

STEDI LED Fog & DRL Upgrade To SuitARB Summit Bullbar

KEY TECHNICAL DETAILS

Built in LED Day-time Running Light (DRL)Two High Performance Osram EmittersUV Stable Automotive Grade PC Primary LensEnvironmentally sealed matching HB4 connector, for easyplug and play installation.Pressure Equalisation Vent | Eliminates condensationIP67 Ingress Protection | Protected from immersion between15 centimetres and 1 meter in depth for 10min at a time.50,000 hours Lifespan24 month Warranty6000K CCTIncludes all required tilt adjust spring and screwAll Alloy outer casing | The original is plastic.RFI & EMI Suppression Circuitry

Price quoted is for a pair (ARB Fog Light Shroud shown is notincluded) If you're unsure whether your ARB bull bar is eligible feelfree to get in touch with us for advice. STEDI Designed & Manufacturered. This product is not endorsed by, directly affiliatedwith ARB. All product and company names are the registeredtrademarks of their original owners. The use of any trade name ortrademark is for compatibility and reference purposes only and doesnot imply any association with the trademark holder of their productbrand.

TECH SPECS

FOG LED / DRL LED 12W FOG & 1.2W DRL

INPUT VOLTAGE 12v to 24v DC



FOG ACTUAL LUMENS 728 Lm each

DRL ACTUAL LUMENS 38 Lm each


CONNECTOR TYPE Sealed HB4

CERTIFICATION IP67

DRL DRAW 0.2A @ 13.6v

FOG LIGHT DRAW 0.9A @ 13.6v

FITSARB Summit Bull Bars, Toyota 70Series Landcruiser

OPERATING TEMP - 40°C to + 60°C

WEIGHT 0.60kg

CCT 6000K

HOUSING MATERIAL Die-Cast AlloyRead More


Product Description

STEDI LED Fog & DRL Upgrade To SuitIronman Bullbar

Compatible with all of the following Ironman 4x4 Bull Bars: AluminiumDeluxe CommercialProtectorPremium DeluxeNo Loop / Single Loop Bull Bars

Also fits some Dobinson bull bars with 110mm diameter fog light. STEDI Designed & Manufactured: This product is not endorsed by,directly affiliated with MCC, Dobinson or Ironman. All product andcompany names are the registered trademarks of their originalowners. The use of any trade name or trademark is for compatibilityand reference purposes only and does not imply any association withthe trademark holder of their product brand.

TECH SPECS

HOUSING MATERIAL Alloy

LED Luxeon T LED

COMPATIBLE VOLTAGE 12V



CERTIFICATION IP67



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/led-conversion-kits/stedi-led-fog-drl-upgrade-to-suit-arb-summit-bullbar/


DRL DRAW 0.3a @ 13.6v / DIM 0.15a @ 13.6v


COMPATIBLE All Ironman bullbars. SomeDobinson Bull Bars

Read More


Product Description

Stedi Fog Light LED Bulb Upgrade

STEDI Solid Fog Light Upgrade LED Retrofit. You've upgradedyour headlights, parkers, and high beam and now realized howyellow your fog lights are. The STEDI Night Pilots Fog LightUpgrade LED Retrofit is your answer. If you're not sure aboutcompatibility please get in touch with our team. TECHNOLOGY

Electrically Protected again RFI and EM InterferenceOver and Under Voltage ProtectionWaterproof connectorsPlug and Play ConnectorIngress Protection IP65True White 5700K to ensure perfect color temp match withyour other STEDI LED productsA solid heatsink with no fan ensures long operating life.

TECH SPECS

HOUSING MATERIAL 6063 Aviation Aluminium (Heat Sink)

BASE MATERIAL OEM Style Plastic

AMPERES 1.2A @ 13.6v (Each Globe)

LUMENS 1,500Lm (Each Globe)

COMPATIBLE VOLTAGE DC 12v and 24v


CANBUS Sold Separately

CONNECTOR TYPE User Selected


OPERATING TEMP -40°c to + 80°cRead More


Product Description

Fitting Type:



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/led-conversion-kits/stedi-led-fog-drl-upgrade-to-suit-ironman-bullbar/


https://www.dentsnall4x4accessories.co.za/catalogue/lighting/led-conversion-kits/stedi-fog-light-led-bulb-upgrade/


H1H3HB4 (9006)H8/H9/H11/H16BMW H8 Angel EyesPWY24WPSX24WP13W DRL & Fog880/881

STEDI LED Fog With DRL Upgrade ForARB Delux Bullbar

KEY TECHNICAL DETAILS

UV Stable automotive grade Poly-carb primary Lens | Unlikethe OE ours lens wont break!Environmentally sealed automotive connectorsUses the same terminals as original ARB fog light for easyinstallation.Military Spec Pressure Equalisation Vent | EliminatescondensationIP67 Ingress Protection | Protected from immersion between15 centimeters and 1 meter in depth for 10min at a time.50,000 hours Lifespan24 month Warranty5700K to ensure a CCT match to other STEDI LED products

Price quoted is for a pair (ARB Fog Light Shroud shown is notincluded) Fits ARB Fog Light Kit Part No: 6821201. If you'reunsure whether your ARB bullbar is eligible feel free to get in touchwith us for advice. Once installed we recommend that the beam is adjusted to ensure that it cuts off no higher than 50cm from the ground, with the car 25m away from a wall. Please note that thisLED upgrade will not suit vehicle which have the IPF upgraded foglight housing and kit. If your fog light lens has the IPF logoembossed on it, this upgrade will not suit. STEDI Designed & Manufactured. This product is not endorsed by, directly affiliatedwith ARB. All product and company names are the registeredtrademarks of their original owners. The use of any trade name ortrademark is for compatibility and reference purposes only and doesnot imply any association with the trademark holder of their productbrand.

TECH SPECS

HOUSING MATERIAL DIE-CAST ALLOY

COMPATIBLE VOLTAGE 12v to 15v

LIFESPAN 30,000 hours



TESTED LUMENS (FOG) 764 Lm

TESTED LUMENS (DRL) 35 Lm


CERTIFICATION IP67

DRL DRAW 0.2A @13.6V

FOG LIGHT DRAW .8A @ 13.6v

DIAMETER 103mm Read More


Product Description

LED & DRL UPGRADEStock is boring, which is why we created a beautifully engineered & designed LED Fog Light upgrade with integratedDay-Time Running Light (DRL). Design by STEDI to specifically suit the ARB Deluxe bull bars. This is the oneyou've been waiting for.

STEDI CANBUS Cancellation Modules(PAIR)

Canbus Error Cancellation Module is recommended for later modelcars that gives dashbourd errors when changing out bulbs to LED . How do I determine whether I need the CANBUS cancellation module? Your vehicle warns you of any bulb failures is one way ofdetermining whether your vehicle has a CANBUS system. What does the CANBUS Cancellation Module do, and why might I need one? Today modern vehicles have several Electronic ControlUnits which monitor the many sub system in today's cars. Thingslike Tyre Pressure Monitoring, Door Locks etc are all controlled viathe CANBUS system. Vehicles that are fitted with CANBUSLighting System, monitor all bulbs in the vehicles system arefunctioning. When the factory bulbs are replaced with LED systems,the CANBUS will detect a variance in the expect current and believethere is a fault or a bulb out, which will either trigger a dash error orno power being delivered to the head lights until the fault isrectified. The CANBUS cancellation module tricks the computer into thinking all is well within the system.

TECH SPECS


COMPATIBILITY 12v ONLYRead More



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/led-conversion-kits/stedi-led-fog-with-drl-upgrade-for-arb-delux-bullbar/


https://www.dentsnall4x4accessories.co.za/catalogue/lighting/led-conversion-kits/stedi-canbus-cancellation-modules-pair/


Product Description

Fitting: H4H7H8/H9/H11/H16HB4

STEDI LED Project Headlight Bulbs -Projector Housing

KEY BEAM CHARACTERISTICSCCT 5700K means colours sync with our auxiliary LED drivinglights. OEM matching light distribution through the exactpositioning of the LED emitters to match the optical properties ofthe projector headlight. One of the critical advantages of projector-based headlamps is that the optical module is fitted with an internalcut-off shield, which keeps oncoming cars from being blinded bystray light scatter, this allows for a brighter light source to beleveraged without fear of poor light distribution. Instant full beamwithout any warm-up time. Electrically Protected against RadioFrequency Interference and Electromagnetic Interference. Weguarantee that our upgrade will not cause in static radio noise. Overand Under Voltage Protection INSTALLATION. Matching plugand play connectors to suit the vehicle OEM connector.

TECH SPECS

INPUT POWER 42W

BEAM ANGLE 270 °

COMPATIBLE VOLTAGE 9V to 22V DC

CURRENT DRAW 3.5A ± 0.2A (each) @13.6v

KELVIN 5700K

TESTED LUMENS 3,700LM (each)

COMPATIBILITY Projector Lens only

FIT COMPATIBILITY User Selected

COOLING EFFICIENCY 7500w / m.kRead More





https://www.dentsnall4x4accessories.co.za/catalogue/lighting/led-conversion-kits/stedi-led-project-headlight-bulbs-projector-housing/


Product Description

Fitting Type: H1H7H8 H9 H11 H16HIR2 (9012)HB3 (9005)

STEDI Copper Head LED Headlight Bulbs -Reflector Housing

STEDI all-new Copper-Head™ LED Headlight kit is designed forvehicles which have the enclosed headlight bulbs that prevent ourfanned Night Pilot kit from being installed. We’ve tested anauseating amount of different “no fan” LEDs, and ultimately restedon our Copper Heads™ for its excellent light distribution, brightness& durability. MATERIAL & THERMAL MANAGEMENT - Staying cool is the end all and be all in the world of LED. Wellexecuted thermal management means higher drive current leading tohigher light volume.

Six 100% Pure Copper(Cu) belts allow maximum thermalconductivity. The thermoelectrically separated coppersubstrates allow heat to transfer to the substrate efficientlyand quickly.

American made Down Corning® thermal paste to increaseconductivity to 6063 aluminium tower.

No fan means modern vehicles which have rigid dust-coversor fully enclosed headlights bulbs can upgrade to LEDwithout modifying the dust cap or worse leaving them offaltogether.

Smaller driver footprint for tight applications.

Near identical footprint to stand halogen bulb ensure 100compatibility.

KEY LIGHTING BENEFITS

Top Bin Philips© Lumileds Luxeon ZES® LED | We’veindependently verified the authenticity of thePhilips© Lumileds used. The undomed nature of the ZES®provide better optical control with minimal scatter.

CCT 5700K means colours sync with our auxiliary LEDdriving lights.

OEM matching light distribution through exact positioning of



the LED emitters to optimise the vehicles reflector design asthe OEM intended.

Instant Full Beam without any warm up time.

TECHNOLOGY

CAN-Bus cancellation built inUnlike other platforms on the market, our Copper Heads LEDKit will not discolour or tarnish your vehicles headlampreflector or lenses.Electrically Protected again RFI and EM InterferenceOver and Under Voltage ProtectionWaterproof connectorsPlug and Play Connector | No cutting or professionalinstallation required, as easy as changing OEM bulbIngress Protection IP65 | means our kits will not fail at thefirst sign of water.True White 5700Kelvin

MONEY BACK GUARANTEE: Our LED Conversion Kits comewith a 100% money back guarantee within 30 days. You're welcometo install and use our conversion kit, and if you're not 100% satisfiedsend them back to us for a no questions asked refund.

TECH SPECS

HOUSING MATERIAL 6063 Aviation Aluminium

LED CHIP TYPE 6 x Philip™ ZES (Each Lamp)

POWER 1.6A each @ 13.6v

RAW LUMENS3,450Lm each globe (RAW)1,760Lm each globe (Actual)


LUMEN MAINTENANCELM-80

50,000 hours

LIFE EXPECTANCY 5Read More


Product Description



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/led-conversion-kits/stedi-copper-head-led-headlight-bulbs-reflector-housing/


STEDI LED License Plate Light forLandcruiser 70, 80, 150 SERIES & FJCRUISER

A completely sealed plug-and-play OE quality retrofit LED toreplace the halogen license plate lights found on the followingToyota models. It offers a significant increase in brightness over theoriginal equipment, and much more uniform light distribution inorder to avoid causing an unwanted glare when the reverse camera isin night vision mode. Installation is plug and play and comes withCANBUS cancellation module to guarantee error-free operation.ADR compliant with (E8) & CE

2010 - 2020 Landcruiser Prado 150 Series 2007 - 2014 Toyota FJ Cruiser XJ10 GSJ151991-1997 Toyota Land Cruiser 80 series FJ8075 78 79 Series Landcruiser

TECH SPECSE-Mark Approved. 12V 3W CE Tick

Read More


Product Description

STEDI 1000 Lumen Reverse Light Upgrades

Let’s face it the factory fitted halogen reverse bulbs just don’t cut it,not even close. A typical halogen bulb usually has an efficiency of18 Lumens per watt of input power, as compared to an astonishing76 Lumens per watt of input power four LED upgrade, whichrepresents a 4.2 x increase in brightness, and less overall powerconsumption. Our high brightness reverse upgrades have built-inerror cancellation making them compatible with any CANBUSapplication. The connectors plug straight into the vehicles factorywiring. The rubber grommet fits any hole size between 13mm and18mm Due to the high level of brightness, we recommend that theseonly be used for reverse. Sold as pairs.

TECH SPECS

HOUSING MATERIAL Aluminium

LED 9 X SEOUL CSP emitters



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/led-conversion-kits/stedi-led-license-plate-light-for-landcruiser-70-80-150-series-fj-cruiser/


POWER 1.0a @ 13.6v

LUMEN 1,000 LM ± 40 M

COMPATIBLE VOLTAGE DC 12v and 24v (Surge 32V)

LIFESPAN 30,000 Hours

CANBUS Compatible



OPERATING TEMP -40°c to + 80°c

CERTIFICATION CE, ROHS

COORDINATED COLOUR TEMP 5800KRead More


Product Description

STEDI FORD RANGER & EVEREST LEDMirror Puddle Lamp

A completely sealed plug and play retrofit LED to replace thehalogen Puddle Lamps found on the Ford Ranger & Ford Everest.Offers a significant increase in brightness over the originalequipment.Read More


Product Description



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/led-conversion-kits/stedi-1000-lumen-reverse-light-upgrades/


https://www.dentsnall4x4accessories.co.za/catalogue/lighting/led-conversion-kits/stedi-ford-ranger-everest-led-mirror-puddle-lamp/


STEDI LED Side Marker for TOYOTA 70 &80 Series Landcruiser

Read More


Product DescriptionA completely sealed plug and play retrofit LED to replace the oranged lens halogen side marker indicator lamps ToyotaLandcruiser 75, 76, 78, 79 & 80 Series. Dynamic amber LED flows when the indicator is active. Install is plug and playcan be done in under 5 min.

STEDI FORD RANGER EVEREST &MAZDA BT-50 LED License Plate Light

A completely sealed plug and play retrofit LED to replace thehalogen license plate lights found on the Ford Ranger, Everest, someMondeo models, and the Mazda BT-50 (2015+). It offers asignificant increase in brightness over the original equipment, andmuch more uniform light distribution in order to avoid causing anunwanted glare when the reverse camera is in night vision mode.Installation is plug and play. PLEASE NOTE: This will not fit XL &XLS RANGER models. Replaces the following OEM Part NumbersFord part # 6M2Z13550A, Jaguar part # C2D16179Read More


Product Description



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/led-conversion-kits/stedi-led-side-marker-for-toyota-70-80-series-landcruiser/


https://www.dentsnall4x4accessories.co.za/catalogue/lighting/led-conversion-kits/stedi-ford-ranger-everest-mazda-bt-50-led-license-plate-light/


STEDI Bayonet Style LEDs

KEY TECHNICAL FEATURES

CANBUS friendly - Error-free operation on 98% of vehicles.Not Polarity Sensitive - our LEDs won't fail if you plug themin the wrong way.Constant Current circuit - Avoids compromising LED life &provides consistent illumination across all LEDsCompatible from 9v to 30v circuits.SMD LED for uniform light distribution

Sold in packs of 2

TECH SPECS

HOUSING MATERIAL Aluminum

LED 3030

POWER 0.419A @ 12V


LUMEN MAINTENANCE (LM-80) 30,000 Hours

CANBUS Compatible

CONNECTOR TYPE USER Selected

LUMINOUS FLUX 609 Lumens


COLOUR RENDERING INDEX 83 CRI

COORDINATED COLOUR TEMP 6000K

CERTIFICATION CE, ROHSRead More


Product DescriptionBayonet LED upgrades are commonly used as reversing lamps and Parkers. If you're tired of constantly changing out-blown LED bulbs, then our LED upgrade is your answer.



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/led-conversion-kits/stedi-bayonet-style-leds/


STEDI Festoon Style Interior LED's

SJ-LEDs are the way to go to take the dullness out of the cabin.Available in a range of sizes to suit most vehicles our SJ are sure tomake all the difference. KEY TECHNICAL FEATURES | SJ-3014 36MM

Not Polarity Sensitive - our SJ's won't fail if you plug them inthe wrong way.Constant Current circuit - Avoids compromising LED life &provides consistent illumination across all LEDsCompatible 12v circuits.SMD LED for uniform light distribution

COMMON USES FOR FESTOON GLOBES

Interior Dome LightsLicense Plate LightsBoot Light

Sold in packs of 2

TECH SPECS


LED 3014


POWER 0.148 A @ 13.6v

COMPATIBLE VOLTAGE DC 12v


CONNECTOR TYPE SJ-xxxx




RENDERING INDEX 74 CRIRead More


Product DescriptionFestoon replacement LED globes are the solution for converting the inside lighting to your car to a pure white, brighterlight. Commonly found in dome and trunk/boot lights, the Festoon LEDs are an easy installation that will replace thedull, yellow factory globes.



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/led-conversion-kits/stedi-festoon-style-interior-leds/


STEDI Wedge Style LEDs

wedge LEDs are the finishing touch to bring the front end of yourcar back in to the 20th century. KEY TECHNICAL FEATURES

CANBUS friendly - Error free operationNot Polarity Sensitive - our LEDs won't fail if you plug themin the wrong way.Constant Current circuit - Avoids compromising LED life &provides consistent illumination across all LEDsCompatible from 9v to 30v circuits.Smoked lens over LEDs for uniform light distribution

COMMON USES FOR OUR WEDGE GLOBES

Interior Dome LightsInterior Map LightsLicense Plate LightsBoot LightCourtesy LightsPark LightsReverse LightsRear Fog Lights

Sold in packs of 2

TECH SPECS


LED 3030


POWER 2.2 Watts



CANBUS Compatible





RENDERING INDEX 83Read More


Product Description



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/led-conversion-kits/stedi-wedge-style-leds/


STEDI 7" Iris Chrome LED Headlight

IRIS 7 Inch LED Driving Lights should be the first step whenimproving your motorcycles' light output. Complete with High andLow beam as well as a full LED halo ring DRL, the IRIS 7" is theperfect replacement for your existing headlight. KEY PERFORMANCE METRICS

ADR Approved E-Mark CEProper Right Hand Drive Beam GeometryH4 AdaptorHigh Beam 1 Lux @ 235mLow Beam 1 Lux @ 141m

PERFORMANCE BUILD QUALITY

Anodized Polyester Powdercoat

Lexan Polycarbonate (PC) Lens refractor

Die-cast aluminium alloy (ADC12) Heat-Sink

IP67 | Ingress Protection

Shock Proof, Waterproof and UV Shielded

Protected against Reverse Polarity and Voltage / Currentsurges

Warranty | 2 Years

COMPATIBLE MODELS:

1955-1983 Jeep CJ-51976-1986 Jeep CJ-71981-1985 Jeep CJ-81997-2006 Jeep Wrangler (TJ)1982 - 1991 Mitsubishi Pajero (L040)Land Rover Defender70 Series Toyota Landcruiser with round headlamp (Needsadditional H4 CANBUS to resolve negative switching)60 Series Toyota Landcruiser with round headlamp (Needsadditional H4 CANBUS to resolve negative switching)Toyota FJ-40/45/47 (Needs additional H4 CANBUS toresolve negative switching)GQ PatrolHarley Davidson MotorcyclesMercedes Benz G WagonKenworth Trucks with 7 inch round headlight



TECH SPECS

LEDHigh Beam: 2x 10w XML-2 LEDLow Beam: 2x 15w LED DRL: 30x1.5w Osram

RAW LUMENSHigh Beam: 2000Lm Low Beam:1400Lm DRL: 150Lm

AMP DRAW High Beam: 2.4a @ 13.6v LowBeam: 1.6a @ 13.6v DRL: 0.2a @13.6v



OPERATING TEMPERATURE

-30°C~+60°C

LENS MATERIAL LEXAN Polycarbonate

COLOUR TEMP 5700K

VOLTAGE COMPATIBILITY

12v & 24v

PEAK BEAM DISTANCE @ 1 LUX

High Beam: 235m Low Beam:141m DRL: 8m

WEIGHT (each) 1.140kg each

DROP IIN REPLACEMENT FOR

#6014, 6015, 6016, H6024 and Par56 headlamp designs

Read More


Product DescriptionIRIS LED Headlight unit is ADR Compliant and features a proper RHD beam geometry. Our IRIS is a complete LEDunit that will replace your existing 7" factory headlight unit. Complete with separate High & Low beams as well as afull halo DRL, the IRIS is your all-in-one upgrade solution for your motorbike or 4x4 vehicle that runs a 7" headlight(list of known compatible models in the description).



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/led-conversion-kits/stedi-7-iris-chrome-led-headlight/


STEDI 7" Homage LED Headlight

390M @ 1 LUX.

Designed with trailblazing dual-mode technology (low and highbeam), the STEDI 7 Inch Homage LED Headlight exemplifies theinnovation and performance that makes STEDI a leader in the LEDautomotive auxiliary lighting industry.

TECH SPECS

LED 2 x 12W Osram KW H4L531.TE

RAW LUMENS 2400Lm

AMP DRAW 1A@24V 2A@12V



OPERATING TEMPERATURE -40°C~+60°C

LENS MATERIAL Hardened Polycarbonate Lens

COLOUR TEMP 5700K

VOLTAGE COMPATIBILITY DC 10V - 28V


High Beam: 390m Low Beam:212m


DROP-IN REPLACEMENT FOR

#6014, 6015, 6016, H6024 andPar 56 headlamp designs

CERTIFICATION CLSPR25 CLASS 3



Read More


Product DescriptionThe stylistic STEDI 7 Inch Homage LED Headlight is a throwback to the classic light design; think of the Jeep CJ,Mercedes G Wagon, Defender, old school muscle cars (to name just a few). A 100% ADR Compliant light that deliversa breaking-edge performance within a retro aesthetic, the STEDI 7 Inch Homage LED Headlight is sure to catch the eyeof all car aficionados.



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/led-conversion-kits/stedi-7-homage-led-headlight/


STEDI 7" Carbon Black LED Headlight

CARBON 7 Inch LED Driving Lights should be the first step whenimproving your motorcycles light output. Complete with High andLow beam as well as a half LED halo ring DRL, the CARBON 7" is the perfect replacement for your existing headlight. KEY PERFORMANCE METRICS

ADR Approved E-Mark CEProper Right Hand Drive Beam GeometryH4 + H13 AdaptorHigh Beam 1 Lux @ 210mLow Beam 1 Lux @ 118m

PERFORMANCE BUILD QUALITY

Anodised Polyester Powder-coat

Lexan Poly-carbonate (PC) Lens refactor

Die-cast aluminium alloy (ADC12) Heat-Sink

IP67 | Ingress Protection

Shock Proof, Waterproof and UV Shielded

Protected against Reverse Polarity and Voltage / Currentsurges

Warranty | 2 Years

COMPATIBLE MODELS:



1955-1983 Jeep CJ-51976-1986 Jeep CJ-71981-1985 Jeep CJ-81997-2006 Jeep Wrangler (TJ)2007-2018 Jeep Wrangler 2-Door (JK)2007-2018 Jeep Wrangler Unlimited 4-Door (JK)Land Rover Defender1982 - 1991 Mitsubishi Pajero (L040)70 Series Toyota Landcruiser with round headlamp (Needsadditional H4 canbus to resolve negative switching)60 Series Toyota Landcruiser with round headlamp (Needsadditional H4 canbus to resolve negative switchingToyota FJ-40/45/47 (Needs additional H4 CANBUS toresolvenegative switching)GQ PatrolHarley Davidson MotorcyclesMercedes Benz G WagonKenworth Trucks with 7 inch round headlight

TECH SPECS

LEDHigh Beam: 2x 10w XML-2 LEDLow Beam: 2x 15w LED DRL: 30x1.5w Osram

RAW LUMENSHigh Beam: 1800Lm Low Beam:1250Lm DRL: 150Lm

AMP DRAW High Beam: 2.4a @ 13.6v LowBeam: 1.6a @ 13.6v DRL: 0.2a @13.6v



OPERATING TEMPERATURE

-30°C~+60°C

LENS MATERIAL LEXAN Polycarbonate

COLOUR TEMP 5700K

VOLTAGE COMPATIBILITY

12v & 24v




High Beam: 210m Low Beam:118mDRL: 8m


DROP IN REPLACEMENT FOR

#6014, 6015, 6016, H6024 and Par56 headlamp designs

Read More


Product DescriptionSTEDI Carbon LED Headlight unit is ADR Compliant and features a proper RHD beam geometry. Our CARBON is acomplete LED unit that will replace your existing 7" factory headlight unit. Complete with separate High & Low beamsas well as a full halo DRL, the CARBON is your all in one upgrade solution for your motorbike or 4x4 vehicle that runs7" headlight (list of known compatible models in the description).

STEDI VW Amarok Lower Grill Light BarBracket

Read More

Categories: Lights Accessories & Spare Parts

Product Description

Size: 31.5" ST3K21.5" ST3K

STEDI VW Amarok Lower Grill Light Bar BracketSuitable to mount either 21.5" or 31.5" Stedi ST3K Light Bar in the lower part of the grill.



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/led-conversion-kits/stedi-7-carbon-black-led-headlight/


https://www.dentsnall4x4accessories.co.za/catalogue/lighting/lights-accessories-spare-parts/stedi-vw-amarok-lower-grill-light-bar-bracket/

https://www.dentsnall4x4accessories.co.za/product-category/lighting/lights-accessories-spare-parts/

STEDI Ford Ranger & Everest Lower GrillLight Bar Mounting Bracket v2

Designed to fit Ford Ranger MK2 (PX2) & Everest 2015 to 2018(UA Chassis) all sub-models including XL, XLS, XLT, Wildtrak &FX4 | Trend, Ambient, Titanium. Will also fit Ford Ranger Raptorand the newer PX3 Ranger without a radar box in the lower grille. Ranger Raptor and PX3 (XLS only) require two holes to be drilled in the lower steel support as the pre-existing mounting holes are absent. Manufactured with 3mm Stainless Steel with satin powdercoat, and designed to be fastened to pre-existing holes which arealready present on the inner steel support. This is a completely non-intrusive install meaning that no new holes need to be made, nor dosections of the front bumper need any cutting or modifying. The endresult is a very robust, stealth installation. The design is optimizedto suit our STEDI ST3K-21.5" LED Light Bar.

Black Powder Coated Finish3 Series Stainless SteelDesigned to minimize disruption of air-flowNo need to remove the front bumperBolts to pre-existing holesNo drilling required, bolt and nut kit included (ExcludingPXIII and Everest with Tech-Pack in the center)

Price is for the bracket only, light bars sold separately.

TECH SPECS

Material 3 series Stainless Steel

Finish Powder Coat Read More


Product Description



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/lights-accessories-spare-parts/stedi-ford-ranger-everest-lower-grill-light-bar-mounting-bracket-v2/


STEDI Ford Ranger Wildtrak/Thunder RoofRail Light Bar Bracket

A roof light bar mounting solution that doesn't involve drilling orother intrusive fasteners. Designed and engineered specifically forthe Ford Ranger Wildtrak & FX4 (PX1, PX2 & PX3), using 3mmstainless steel finished in a satin UV stable powder coating.Designed to bolt to existing fasteners on the underside of roofrailing, our Wildtrak roof bracket is designed to fit our ST4K 42", ST3K 41.5" & our ST2K 40.5" series light bars (sold separately)Whilst our Wildtrak brackets may suit other similar size light bars,we ask customers to take caution as we have only torture testedusing the above STEDI bars.

TECH SPECS

Material 3mm Stainless Steel

FitsFord Ranger Wildtrak FX4 PX1, PX2, PX3 2012to Current

Read More


Product Description

STEDI Rhino Rack Platform Light BarMounting Bracket

KEY PRODUCT FEATURES

Manufactured using 4mm thick stainless steel.The powder-coat is a textured finish which precisely matchesthe tone and texture of the Rhino Rack™The light bar mounting points are slotted allowing heightoptimization of the light bar.Ability to slide the mounts backward and forward along theplatform channel.Mounts lights directly below the Rhino platformAdd-on front mount plate allows the light bar to sit in front ofthe Rhino Rack™

SUITS THE FOLLOWING RHINO RACK™

Pioneer Platform 4 & 5 plankPioneer Tray 4 & 5 plankPioneer Tradie 4 & 5 plank

Read More



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/lights-accessories-spare-parts/stedi-ford-ranger-wildtrak-thunder-roof-rail-light-bar-bracket/


https://www.dentsnall4x4accessories.co.za/catalogue/lighting/lights-accessories-spare-parts/stedi-rhino-rack-platform-light-bar-mounting-bracket/


Product Description

STEDI Rally Bar to Suit Ford

The STEDI Rally Bar is a perfect match for our 60mm - 66mm HEX Bull Bar Tube Mounting Brackets. The Hex is designed to reduceexcessive mounting equipment, and when combined with the RallyBar, provides the perfect solution for hosting your ideal lightcombination. To suit all Ford Ranger PX2, PX3, Raptor, and Everest vehicles.

TECH SPECS

HOLDING CAPACITY 30kg

MATERIAL Stainless steel (front tube)

THICKNESS 2mm

DIAMETER 60mm

PRODUCT WEIGHT 5.1kg

SHIPPING WEIGHT 6.3kg

Read More


Product Description




https://www.dentsnall4x4accessories.co.za/catalogue/lighting/lights-accessories-spare-parts/stedi-rally-bar-to-suit-ford/


STEDI Rock Light Easy Fit Rhino RackMount (pair)

Sold in pairs & designed specifically for the updated range (newshape) of STEDI Surface LED Rock Lights. STEDI Designed & Manufactured. This product is not endorsed by or directly affiliatedwith Rhino-Rack™. All product and company names are theregistered trademarks of their original owners. The use of any tradename or trademark is for compatibility and reference purposes onlyand does not imply any association with the trademark holder oftheir product brand.

NOTE: you will require 2 x M5 25mm button head screws for fitment (screws not supplied).

TECH SPECS

COMPATIBILITYFits CURRENT SHAPE STEDISurface Rock Lights (refer to diagram)

SUITABILITYAny application with an opening of26mm - 47mm

MATERIAL ABS & PC

SCREW TYPE2 x M5 25mm button head (notsupplied)

Read More


Product Description



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/lights-accessories-spare-parts/stedi-rock-light-easy-fit-rhino-rack-mount-pair/


STEDI Ford Ranger Raptor Inner Grill LightMount

Designed to fit Ford Ranger Raptor (2019+) Manufactured with3mm Stainless Steel, and designed to be fastened to pre-existingholes which are already present on the inner side of the front grille.This is a completely non-intrusive install meaning that no new holesneed to be made, nor do sections of the front bumper need anycutting or modifying. The end result is a very robust, stealthinstallation. Design is optimized to suit our STEDI ST3K 21.5" or STEDI ST1K 21.5" LED Light Bars.

Stainless SteelDesigned to minimize disruption of air-flowNo need to remove front bumperBolts to pre-existing holesNo drilling required, bolt and nut kit included

Price is for the bracket only, light bars sold separately.

Read More

Categories: Speciality Brackets

Product Description

STEDI Surface Rock Light 30° AngledBracket

Suitable for all STEDI Surface LED Rock Lights (RGB/White),allowing mounting with a fixed 30°.

TECH SPECS

COMPATIBILITY All STEDI Surface Rock Lights

MATERIAL RubberRead More


Product Description



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/speciality-brackets/stedi-ford-ranger-raptor-inner-grill-light-mount/

https://www.dentsnall4x4accessories.co.za/product-category/lighting/speciality-brackets/

https://www.dentsnall4x4accessories.co.za/catalogue/lighting/speciality-brackets/stedi-surface-rock-light-30-angled-bracket/


STEDI Number Plate Light MountingBracket

DETAILS

The STEDI Hardened Steel Number Plate light mounting bracketsbolt through your existing number plate holes, for effortlesslymounting driving lights or and LED Light Bar. Finished in a durablesatin black UV stabilised powder coat, along with contoured tubesection, makes for an aesthetically pleasing addition to anypassenger vehicle. Great solution if you need to install Spot Light ora LED Light Bar but do not have a nudge bar or bull bar to mountto. Universal fitment, with no modification required. Fits mostlights with adjustable bottom slide brackets. Also has provision tomount UHF antenna.

SPECIFICATIONS

MATERIAL | Hardened SteelWeight 1.14KgUV rated Powder Coat

Read More


Product Description



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/speciality-brackets/stedi-number-plate-light-mounting-bracket/


STEDI ST3303 & ST3301 Pro Color Caps

Color: RedGreenTanYellowBlue

Read More


Product Description

STEDI ST3303 Pro Black Out Covers

Optional blackout cover for STEDI ST3303 Pro LED Light Bars -STEDI logo print *Please Note: These covers are specificallydesigned to fit the STEDI ST3303 Pro LED Light Bars*

TECH SPECS

COMPATABILITY STEDI ST3303 Pro Series Light Bars

SIZE

11"18.4"23.3"28.2"39"

Read More


Product Description



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/lights-accessories-spare-parts/stedi-st3303-st3301-pro-color-caps/


https://www.dentsnall4x4accessories.co.za/catalogue/lighting/lights-accessories-spare-parts/stedi-st3303-pro-black-out-covers/


STEDI QUAD Pro Optional ReplacementCovers

TECH SPECSCOMPATABILITY: STEDI QUAD Pro Series Spot Lights STYLE:Clear or Smiley

Read More


Product Description

STEDI ST4K Black Out Covers

Optional blackout cover for STEDI ST4K LED Light Bars - STEDIlogo print *Please Note: These covers are specifically designed to fitthe STEDI ST4K LED Light Bars*

TECH SPECS

COMPATABILITY STEDI ST4K Series Light Bars

SIZE User Selected

Size:

8"12"14"22"28"32"42"50"52"

Read More


Product Description



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/lights-accessories-spare-parts/stedi-quad-pro-optional-replacement-covers/


https://www.dentsnall4x4accessories.co.za/catalogue/lighting/lights-accessories-spare-parts/stedi-st4k-black-out-covers/


STEDI Type-X Pro Color Rings

TECH SPECS

COMPATIBILITY STEDI TYPE-X Pro ONLY

COLOUR User Selected

Color:

GreyOrangeRedYellowTanGreenPinkBlue

Read More


Product Description

STEDI QUAD Pro Colored Cap Kit

TECH SPECS

Compatible with STEDI QUAD Pro LED Driving LightsGives the user the freedom to customize the look of theirQUAD Pro'sQuick and Easy Installation

WHAT'S INCLUDED

2x Color Cap Sets to suit 1 Pair (2) QUAD Pro's - UserSelected Color

Color:

RedGreenBlueYellow



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/lights-accessories-spare-parts/stedi-type-x-pro-color-rings/


Read More


Product Description

STEDI Anti-Theft kit for Type-X 8.5" & 7"Spotlights

Pre-Configured Anti-Theft kits to suit the STEDI TYPE X Sport8.5" & 7" & Type-X PRO Driving Lights. Nuts & bolts are 304Stainless Steel. One anti-theft pack will do a pair of Type-X.

1 x M10 Nut Security Key1 x M8 Bolt Security Key4 x 8mm Bolts (Long) - Used to secure the brackets to thesides of the Type-X2 x 10mm Nuts - Used to secure the bracket to the vehicle.

Read More


Product Description

STEDI TYPE-X™ SPORT 7" OptionalReplacement Covers

Now with a range of custom colors and styles, you can make your set of Type XSpotlights your own. Standard clear or black replacements available as well as theall-time favorite smiley and range of tinted filter covers.

SPECIFICATIONS

COMPATABILITY Type-X Sport 7"

SIZE 7 Inch Diameter

Style: Smiley



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/lights-accessories-spare-parts/stedi-quad-pro-colored-cap-kit/


https://www.dentsnall4x4accessories.co.za/catalogue/lighting/lights-accessories-spare-parts/stedi-anti-theft-kit-for-type-x-8-5-7-spotlights/


ClearSTEDI Stencil

Read More


Product Description

STEDI ST3301 Pro Black Out Covers

Optional blackout cover for STEDI ST3301 Pro LED Light Bars -STEDI Stencil print *Please Note: These covers are specificallydesigned to fit the STEDI ST3301 Pro LED Light Bars*

SPECIFICATIONS

COMPATABILITY STEDI ST3301 Pro Series Light Bars

Size: 18.6"24.5"27.5"41"

Read More


Product Description

STEDI ST3K Black Out Covers

Optional blackout cover for STEDI ST3K LED Light Bars - STEDIlogo print *Please Note: These covers are specifically designed to fitthe STEDI ST3K LED Light Bars*

TECH SPECS

COMPATABILITY STEDI ST3K Series Light Bars

Size: 7.5"11.5"21.5"31.5"41.5"



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/lights-accessories-spare-parts/stedi-type-x-sport-7-optional-replacement-covers/


https://www.dentsnall4x4accessories.co.za/catalogue/lighting/lights-accessories-spare-parts/stedi-st3301-pro-black-out-covers/


51.5"

Read More


Product Description

STEDI TYPE-X™ PRO/SPORT 8.5"Optional Replacement Covers

Now with a range of custom colours and styles, you can make yourset of Type X Spot lights your own. Standard clear or blackreplacements available as well as the all time favorite smiley andrange of tinted filter covers. Style:

SmileyClearSTEDI StencilClear DiffusedSTEDI BoldClear BlueBlood SplatterCamoClear YellowClear GreenCarbon Print

COMPATABILITY Type-X Sport 8.5" Type-X Pro 8.5"

SIZE 8 Inch Diameter

Read More


Product Description



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/lights-accessories-spare-parts/stedi-st3k-black-out-covers/


https://www.dentsnall4x4accessories.co.za/catalogue/lighting/lights-accessories-spare-parts/stedi-type-x-pro-sport-8-5-optional-replacement-covers/


STEDI Small Tube Mounting Brackets

DETAILS

Black Bull Bar brackets are made from High Quality Aluminium.These bulbar brackets can be used for effortless mounting of ourrange of HID Spot Light and Light Bars. Can also be used to mountthe following;

Communications AntennasReversing Camera SystemsDriving LightsLED Light Bar

Please ensure you carefully measure your bull bar to ensure correctfitment. We supply in the package 2 x rubber inserts which can pickup slack and is also recommended to prevent scratches on yourapplied surface.

Read More

Categories: Driving Light Accessories

Product Description

STEDI Tube Clamp Bull Bar Brackets offer a stable mounting platform for bullbars that are not fitted with tabs forUHF Antennas and LED lights. Made from cast aluminum with stainless steel fasteners keeping it is strong yetlightweight as well as a polyester UV stable powder coat to reduce fade. Size:

28-30MM35MM

STEDI Vice Bull Bar Tube Clamps

TECH SPECS(49mm - 51mm VICE Bull Bar Tube Clamp Illustrated) The STEDIVice Clamp Bull Bar Brackets will meet the versatile applicationwhen it comes to side mounted & certain lower mounted LED lightBars. Made from cast aluminium with stainless steel fastenerskeeping it strong yet light weight as well as a polyester UV stablepowder coat to reduce fade.

Read More




https://www.dentsnall4x4accessories.co.za/catalogue/lighting/driving-light-accessories/stedi-small-tube-mounting-brackets/

https://www.dentsnall4x4accessories.co.za/product-category/lighting/driving-light-accessories/

https://www.dentsnall4x4accessories.co.za/catalogue/lighting/driving-light-accessories/stedi-vice-bull-bar-tube-clamps/


Product Description

STEDI HEX Bull Bar Tube MountingBrackets

Stedi ingenious Tube Clamp provides a convenient solution forcomfortably mounting LED lights to your vehicle’s nudge bar. This new innovative design also allows for a non-intrusive clamp mechanism, resulting in the securing nuts and bolts being hidden.The design also enhances the security of your LED light, as theattached tube clamp (and mounted light) is next to impossible to besnatched from your vehicle.Read More


Product Description

STEDI Bull Bar Tube Mounting Brackets

Black Bull Bar brackets are made from High Quality Aluminium.These bulbar brackets can be used for effortless mounting of ourrange of HID Spot Light and Light Bars. Can also be used to mountthe following;

Communications AntennasReversing Camera SystemsDriving LightsLED Light Bar

Please ensure you carefully measure your bull bar to ensure correctfitment. We supply in the package 2 x rubber inserts which can pickup slack and is also recommended to prevent scratches on yourapplied surface.

Read More


Product Description

The STEDI Tube Clamp Bull Bar Brackets offer a stable mounting platform for bullbars that are not fitted with tabs forUHF Antennas and LED lights. Made from cast aluminum with stainless steel fasteners keeping it is strong yetlightweight as well as a polyester UV stable powder coat to reduce fade. Size:

40MM-45MM48MM-53MM



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/driving-light-accessories/stedi-hex-bull-bar-tube-mounting-brackets/


https://www.dentsnall4x4accessories.co.za/catalogue/lighting/driving-light-accessories/stedi-bull-bar-tube-mounting-brackets/


60MM-65MM76MM-81MM

6 RGB Camp Light Kit – Underlight X6

Dimensions

Image not found or type unknown

What's Included

Teralume Industries™ Underlight X6 LED Rock Light Kit6x RGB Rock Lights4x 3.5M Cables and 2x 5M CablesBluetooth Power Module with 6-to-1 Weather Proof ConnectorsStainless Steel Hardware for Each Rock Light6x Rubber Base Mounts

Specifications

Voltage – 9-24V DCMounting – Stainless Steel Fasteners and 6x Rubber BasesAmps – 9w / 0.48A @ 12V DC (each)Vibration – Vibration dampened and shockproof to 28GDiode Count – 3x 3w RGB CREE® LEDsLumens – 303-558 Effective Lumens (Depending on Colour)Light Beam – Super Scene BeamIngress – IP69K – Water Proof up to 3 metersBase – Flat Rubber BasesWiring – Varied CableHousing – High Pressure Cast AluminiumPolarity – Reverse Polarity ProtectionInterference – CISPR25 Class 3



Features

Compact – Barely noticeable, the Underlight X6 Kit is ultradiscrete and compact. Can be used inside and outside – Mountthem anywhere!Durable – Weather proof, fully sealed with PC lens, StainlessSteel fasteners and a rubber pad allow for trouble free fittingand operating.Dust & Waterproof – IP69K. The X6 obtains the highestingress rating available.Interference Free – CISPR25. The X6’s wont interfere withelectronics such as your UHF/CB Radio or cellular devices.ULTRA Low Current Draw – With a low current draw, youcan run the Underlights rock lights lights off your start batterywith out hassle.60,000 Hour Life – Trouble free operation year after year, orwe’ll replace it!

Read More

Categories: Camping Lights

Product Description

IOS & ANDRIOD PHONE APP

BLUETOOTH

Own and IOS or Andriod device? Download the free Bluetooth App and take control of the entire system, from thetouch of a button! Millions of colour choices, animated modes and basic functions can all be controlled from the easy touse Bluetooth App. Most popular choices are choosing colours to suit the environment, like an amber shade to reducethe bugs or dimming the system to provide no intrusive light. The options are literally endless!



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/6-rgb-camp-light-kit-underlight-x6/

https://www.dentsnall4x4accessories.co.za/product-category/lighting/camping-lights/

Teralume ICON LED Driving Lights

The Icon represents what a driving light should be in more waysthan one. The intense spot beam that the Icons project is whateveryone’s been waiting for since LED technology found its wayinto driving lights; distance down the road. The Icons comprise of34 x ultra-high-output emitters, 6 x Oslon® emitters and 28 x CREE® emitters. Both emitters complement each other perfectly, boastingweapon-like output and beam length. Each emitter has beenspecifically tuned to the reflector, unlike any other LED DrivingLight on offer. The hybrid of Oslon® and CREE® ultra-highintensity emitters and sophisticated reflector design redefine theLED Driving Light space, projecting a clear and even beam of lightover 1300m ahead. For the first time, you can now experience whata true LED Driving Light should be.Read More


Product Description

Specifications

Voltage – 9-36V DCMounting – 5mm Brushed Stainless Steel Brackets – No WeldsPower – 120w / 8.6A @ 12V DCVibration – Vibration dampened and shockproof to 28GDiodes – Combination of ultra high output Oslon® and CREE® didoesLumens – 14, 616 Effective Lumens per unitLight Beam – 3.7-degree hyper spot beamIngress – IP69K – Water Proof up to 3 metersConnections – Waterproof Deutsch® DT-P connectorWiring – Complete Plug ‘n’ Play Quik-Fit Harness + H4 & HB3 connectorsHousing – Ultra high-pressure cast aluminiumWeight – 3.25 Kilograms EachInterference – CISPR 25 Class 3

Features

Sold In Pairs – The Icons are sold as pairs and arrive at your home in one box, ready to run.Fully Assembled – The Icons arrive fully assembled and ready to run. All you need to do is mount them and plugthem in!Less Unwanted Reflection – The Icons have a far superior beam pattern to most other driving light offerings. Lessstray light is emitted from the lamp, significantly reducing unwanted reflective feedback to the driver.5mm Bracket – Class-leading 5mm Stainless Steel bracket will stand up to huge punishment!Dust & Waterproof – IP69K. The Icon’s obtain the highest ingress certification available. 100% water and dusttight.Interference Free – CISPR 25 Class 3 Certified. The Icon’s won’t interfere with electronics such as your UHF/CB



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/round-driving-lights/teralume-icon-led-driving-lights/


Radio or cellular devices.5500 Kelvin – Less eye fatigue. The Icon’s allow you to see obstacles and hazards with total clarity.

DOUBLE ROW 60 L.E.D.

PRODUCT FEATURES:

Lense Length: 30 inch / 76.20cmBeam: Combination LightLumens: 16 800 LM @ 12.7 ADistance: 1 320mIP Rating: IP69Part #: RRAGE D-60-LED

IMPORTANT NOTES: Lense Length: The lense length refersto the actual length of the LEXAN lense and excludes the frame ortwo foot pieces. Total Length of Light Unit: Since the lense lengthonly indicates the length of the lense, please allow for an additional50mm on each side, when calculating which size will be suitable forthe specific application. The additional 50m on each side refers tothe frame as well as the foot piece. Distance: Manufacturers testtheir lights on an ideal flat terrain, without any physicalobstructions, to determine the maximum distance at which the lightis reflected back. This distance, in other words, refers to the furthestpoint of light reflection and not to a focus point. Special equipmentis utilised for this test as the human eye might not even be able tosee/identify the reflecting object. Read More


Product Description

DOUBLE ROW 20 L.E.D.

PRODUCT FEATURES:

Lense Length: 10 inch / 25.40cmBeam: Spot LightLumens: 4 800 LM @ 4.0 ADistance: 780mIP Rating: IP69Part #: RRAGE D-20-LED

IMPORTANT NOTES: Lense Length: The lense length refersto the actual length of the LEXAN lense and excludes the frame ortwo foot pieces. Total Length of Light Unit: Since the lense lengthonly indicates the length of the lense, please allow for an additional50mm on each side, when calculating which size will be suitable for



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/light-bars/double-row-60-l-e-d/


the specific application. The additional 50m on each side refers tothe frame as well as the foot piece. Distance: Manufacturers testtheir lights on an ideal flat terrain, without any physicalobstructions, to determine the maximum distance at which the lightis reflected back. This distance, in other words, refers to the furthestpoint of light reflection and not to a focus point. Special equipmentis utilised for this test as the human eye might not even be able tosee/identify the reflecting object. Read More


Product Description

DOUBLE ROW 8 L.E.D.

PRODUCT FEATURES:

Lense Length: 4 inch / 10.16cmBeam: Spot LightLumens: 1 920 LM @ 1.3 ADistance: 540mIP Rating: IP69Part #: RRAGE D-8-LED

IMPORTANT NOTES: Lense Length: The lense length refersto the actual length of the LEXAN lense and excludes the frame ortwo foot pieces. Total Length of Light Unit: Since the lense lengthonly indicates the length of the lense, please allow for an additional50mm on each side, when calculating which size will be suitable forthe specific application. The additional 50m on each side refers tothe frame as well as the foot piece. Distance: Manufacturers testtheir lights on an ideal flat terrain, without any physicalobstructions, to determine the maximum distance at which the lightis reflected back. This distance, in other words, refers to the furthestpoint of light reflection and not to a focus point. Special equipmentis utilised for this test as the human eye might not even be able tosee/identify the reflecting object. Read More


Product Description







AR SERIES - SINGLE ROW 30 L.E.D.

PRODUCT FEATURES:

Lense Length: 30 inch / 76.20cmBeam: Combination LightLumens: 4 606 LM @ 11.1 ADistance: 965mIP Rating: IP69Part #: RRAGE-AR-S30LED

IMPORTANT NOTES:

For the AR SERIES we use a CREE motherboard that consists ofLED reflectors WITHOUT the optic lens enhancers. Themotherboard consists of 5 Watt light emitting diodes. All thoughthe lights in the AR SERIES don’t have the same penetration as theOPTIC Series, it still outshines other famous LED brands. TheOPTIC Series is already well priced, but the AR SERIES is evenmore affordable! LENSE LENGTH: The lense length refers to theactual length of the LEXAN lense and excludes the frame or twofoot pieces. TOTAL LENGTH OF LIGHT UNIT: Since the lenselength only indicates the length of the lense, please allow for anadditional 50mm on each side, when calculating which size will besuitable for the specific application. The additional 50m on eachside refers to the frame as well as the foot piece. DISTANCE: Manufacturers test their lights on an ideal flat terrain, without anyphysical obstructions, to determine the maximum distance at whichthe light is reflected back. This distance, in other words, refers tothe furthest point of light reflection and not to a focus point. Specialequipment is utilised for this test as the human eye might not evenbe able to see/identify the reflecting object. Read More


Product Description



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/light-bars/ar-series-single-row-30-l-e-d/


AR SERIES - SINGLE ROW 4 L.E.D.

PRODUCT FEATURES:

Lense Length: 4 inch / 10.16cmBeam: Spot / Flood LightLumens: 1 173 LM @ 1.8 ADistance: 485m (Spot) & 335m (Flood)IP Rating: IP69Part #: RRAGE-AR-S4LED

IMPORTANT NOTES:



Product Description



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/light-bars/ar-series-single-row-4-l-e-d/


AR SERIES - DOUBLE ROW 60 L.E.D.

PRODUCT FEATURES:

Lense Length: 30 inch / 76.20cmBeam: Spot LightLumens: 7 032 LM @ 12.9 ADistance: 1 080mIP Rating: IP69Part #: RRAGE-AR-D60LED

IMPORTANT NOTES:



Product Description



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/light-bars/ar-series-double-row-60-l-e-d/



PRODUCT FEATURES:

Lense Length: 20 inch / 50.80cmBeam: Spot LightLumens: 5 210 LM @ 8.0 ADistance: 875mIP Rating: IP69Part #: RRAGE-AR-D40LED

IMPORTANT NOTES:



Product Description






PRODUCT FEATURES:


IMPORTANT NOTES:

For the AR SERIES we use a CREE motherboard that consists ofLED reflectors WITHOUT the optic lens enhancers. Themotherboard consists of 5 Watt light emitting diodes. All thoughthe lights in the AR SERIES don’t have the same penetration as theOPTIC Series, it still outshines other famous LED brands. TheOPTIC Series is already well priced, but the AR SERIES is evenmore affordable! LENSE LENGTH: The lense length refers to theactual length of the LEXAN lense and excludes the frame or twofoot pieces. TOTAL LENGTH OF LIGHT UNIT: Since the lenselength only indicates the length of the lense, please allow for anadditional 50mm on each side, when calculating which size will besuitable for the specific application. The additional 50m on eachside refers to the frame as well as the foot piece. DISTANCE: Manufacturers test their lights on an ideal flat terrain, without anyphysical obstructions, to determine the maximum distance at whichthe light is reflected back. This distance, in other words, refers tothe furthest point of light reflection and not to a focus point. Specialequipment is utilised for this test as the human eye might not evenbe able to see/identify the reflecting object.Read More


Product Description






PRODUCT FEATURES:


IMPORTANT NOTES:



Product Description





XDD220 36W Dual Row Bar

The XDD220 36W Dual Row Bar features the following: 1 LUX @220 meters. LED Power: 36W. 3020 Total Lumens. OperatingVoltage: 10-30 DC. Waterproof rate: IP 67. 12pcs*3w highintensity OSRAM LEDS. Current draw:12V/1.6A?24V/0.8A. Color Temperature: 6000K. Life time: 50000 hours. Material:High grade aircraft aluminium housing. Lens material:Polycarbonate lens. Mounting Bracket: Alloy. Combo beam(spread and spot). Dimensions: (Height with feet = 111.2mm /Width = 235mm/ Depth = 86.5mm). Weight: 1.1kg. Certificates:CE, RoHs, EMC, C-Tick. Wiring harness available. Deutschconnector included. 3 Year warranty.Read More


Product Description

Hardkorr XD Single Row LED Bar 310

KORR® has developed the new “XD Series”, which features intenselight powered by a new German Osram chip. The new developmentsare backed up with the latest design in reflector technology, whichthen enables these lights to throw light twice as far, using half thepower. Never has there been such dramatic gains in technology.LED Driving Lights are now as good, if not better than your HIDDriving Lights. Wider, whiter, longer and less power than everbefore, the “XD Series” Driving Lights will set the benchmark forperformance and price. 1 LUX @ 310 meters. LED Power: 18W. 1800 Total Lumens. Operating Voltage: 11-38 DC. Waterproofrate: IP 68. 6pcs*3w high intensity OSRAM LEDS . Currentdraw:12V/1.5A?24V/0.75A. Color Temperature: 5500-6000K. Lifetime: 50000 hours. Material: High grade aircraft aluminiumhousing. Lens material: Polycarbonate lens. Mounting Bracket:Alloy. Beam (spot). Dimensions: (Height with feet = 72mm /Width = 290mm/ Depth = 70mm). Dimensions: (Height with endsmounts= 80mm / Width = 365mm/ Depth = 70mm). Weight: 1.1kg. . Certificates: CE, RoHs, EMC, C-Tick. Wiring harness available. Deutsch connector included. 3 Year warranty.Read More


Product Description



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/light-bars/xdd220-36w-dual-row-bar/


https://www.dentsnall4x4accessories.co.za/catalogue/lighting/light-bars/hardkorr-xd-single-row-led-bar-310/


Hardkorr Trailblazer 6? Driving Light

HARD KORR®’s all-new Trailblazer BZR Series LED drivinglights have been named in honour of those enterprising men andwomen who dare to be different; who take the road less travelled,and who can rightly lay claim to the title of Trailblazer. Withincredible light penetration, rugged aluminium housing, ultra-durable marine grade steel bracket and IP68 waterproof enclosure,the HARD KORR Trailblazer BZR Series driving lights will rollback the darkness, wherever your journey takes you.Read More


Product DescriptionSpecifications Materials Aircraft aluminium housing 4mm 316 stainless steel bracket Lexan® polycarbonate lens| Dimensions 150mm (w) x 165mm (h) x 78mm (d) incl. bracket | LED Manufacturer Genuine OSRAM® | LEDNumber 14 x 3w | Output 3,780 lumens | Lux (pair) 1 lux @ 672m | Beam distance (pair) 1,344m | Beam Spot | IngressProtection IP68 | Weight 1.8kg | Operating Voltage 10 – 30v DC | Current 2.9A @ 12V / 1.6A @ 24V | Colour Temp6000K | LED Lifespan 50,000+ hours | Certifications CE, RoHS, C-Tick Pack Contents 1x 42w LED driving light | 1x316 stainless steel mounting bracket | 1x set of clear protective covers | 1x Deutsch plug connectors

Hardkorr Trailblazer 7? Round Driving Light

With incredible light penetration, rugged aluminium housing, ultra-durable marine grade steel bracket and IP68 waterproof enclosure,the HARD KORR Trailblazer Series driving lights will roll back thedarkness, wherever your journey takes you.Read More


Product Description

HARD KORR’s Trailblazer BZR Series® driving lights utilize the very latest in LED technology. With super-efficientcircuitry, patented reflector design created by expert engineers, and top-grade genuine OSRAM® LED chips, one pairof BZR180 7? lights has been independently tested by QUT’s NATA-accredited photometric laboratory at 1 lux @734m.

Genuine OSRAM LED’s purchased from authorized agentPatented reflector design and super-efficient circuitry delivers a strong, even beam using less power than everbeforeExtra heavy-duty 4mm 316 marine-grade stainless steel bracketLexan polycarbonate lens is unbreakable, abrasion-resistant and optically clearCustom molded rubber seal and positively-sealed light enclosure delivers a real IP68 waterproof ratingDaytime running light for extra visibilityAnti-theft bolts and nuts to help protect your investment from thieves



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/round-driving-lights/hardkorr-trailblazer-6″-driving-light/


https://www.dentsnall4x4accessories.co.za/catalogue/lighting/round-driving-lights/hardkorr-trailblazer-7″-round-driving-light/


Hardkorr Round LED Combo Beam Spotlight

The XDR270F LED Driving Light features 1 LUX @ 270 meters. 1x XDR270F (80w) LED Driving light. LED Power: 80W. 7000Total Lumens. Operating Voltage: 9-30 DC. Waterproof rate: IP 69(waterproof to 3m). 16pcs*5w high intensity CREE LEDS. Currentdraw:12V/6.66A? 24V/3.33A. Color Temperature: 6000K. Lifetime: 50000 hours. Material: High grade aircraft aluminiumhousing. Lens material: Polycarbonate lens. Mounting Bracket:Galvanised Steel. Beam: Combo. Dimensions: (Height withbracket= 237mm / Width = 180mm/ Depth = 114mm). Weight:2.9kg. Certificates: CE, RoHs, EMC, C-Tick. Wiring harnessavailable. Deutsch connector included. 3 Year warranty.Read More


Product DescriptionThe XDR270F LED Driving Light features 1 LUX @ 270 meters. 1 x XDR270F (80w) LED Driving light. LEDPower: 80W. 7000 Total Lumens. Operating Voltage: 9-30 DC. Waterproof rate: IP 69 (waterproof to 3m). 16pcs*5whigh intensity CREE LEDS. Current draw:12V/6.66A? 24V/3.33A. Color Temperature: 6000K. Life time: 50000hours. Material: High grade aircraft aluminium housing. Lens material: Polycarbonate lens. Mounting Bracket:Galvanised Steel. Beam: Combo. Dimensions: (Height with bracket= 237mm / Width = 180mm/ Depth = 114mm). Weight: 2.9kg. Certificates: CE, RoHs, EMC, C-Tick. Wiring harness available. Deutsch connector included. 3 Yearwarranty.

Hardkorr Trailblazer 9? Driving Light

HARD KORR®’s all-new Trailblazer BZR Series LED drivinglights have been named in honour of those enterprising men andwomen who dare to be different; who take the road less travelled,and who can rightly lay claim to the title of Trailblazer. Withincredible light penetration, rugged aluminium housing, ultra-durable marine grade steel bracket and IP68 waterproof enclosure,the HARD KORR Trailblazer BZR Series driving lights will rollback the darkness, wherever your journey takes you. Price is perlight. KEY FEATURES

Genuine OSRAM LED’s purchased from authorised agentPatented reflector design and super-efficient circuitry deliversa strong, even beam using less power than ever beforeExtra heavy-duty 4mm 316 marine-grade stainless steelbracketLexan polycarbonate lens is unbreakable, abrasion-resistantand optically clearCustom molded rubber seal and positively-sealed lightenclosure delivers a real IP68 waterproof rating



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/round-driving-lights/hardkorr-round-led-combo-beam-spotlight/


Daytime running light for extra visibilityAnti-theft bolts and nuts to help protect your investment fromthieves

Read More


Product DescriptionHard Korr’s new Ultralite Series LED Driving lights deliver an insane 1 lux @ 1,057m (pair) out of a compact unit thatweighs just 2.4kg. They are particularly suited to vehicles with narrow mounting surfaces such as many modern factorybullbars. Hard Korr’s Ultralite Series LED Driving Lights deliver revolutionary performance in a compact, lightweightunit. Measuring just 25mm from the back of the light to the middle of the mounting bolt and weighing in at just 2.4kg,Ultralite series lights will fit in places no driving light has fit before. They are particularly suited to the factory bars onmany new utes and 4×4 where the mounting surface is very narrow. But don’t be fooled – these lights are not toys.Blasting 1 lux of light at a mind-melting 1,057m down the road thanks to its next-generation 5w OSRAM LEDs andsuper-efficient circuitry, they are capable of handling series country or off-road driving. They’re also CISPR15compliant, meaning they have been independently tested to ensure they do not interfere with radio frequencies.


KORR® has developed the new “XD Series”, which features intenselight powered by a new German Osram chip. The new developmentsare backed up with the latest design in reflector technology, whichthen enables these lights to throw light twice as far, using half thepower. Never has there been such dramatic gains in technology.LED Driving Lights are now as good, if not better than your HIDDriving Lights. Wider, whiter, longer and less power than everbefore, the “XD Series” Driving Lights will set the benchmark forperformance and price. 1 LUX @ 340 meters. LED Power: 36W. 3600 Total Lumens. Operating Voltage: 11-38 DC. Waterproofrate: IP 68. 12pcs*3w high intensity OSRAM LEDS. Currentdraw:12V/3.0A?24V/1.5A. Color Temperature: 5500-6000K. Lifetime: 50000 hours. Material: High grade aircraft aluminiumhousing. Lens material: Polycarbonate lens. Mounting Bracket:Alloy. Combo Beam (spot & flood). Dimensions: (Height with feet= 72mm / Width = 555mm/ Depth = 70mm). Dimensions: (Heightwith end mounts= 80mm / Width = 620mm/ Depth = 70mm). Weight: 2.1kg. Certificates: CE, RoHs, EMC, C-Tick . Wiringharness available. Deutsch connector included. 3 Year warranty.Read More


Product Description



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/round-driving-lights/hardkorr-trailblazer-9″-driving-light/




Night Hawke 7? VLI Series LED DrivingLight

Each light is supplied with two protective covers which allow theuser to change the beam pattern quickly and easily. With the spotprotective cover fitted, the light projects a clean, focused spot beampattern that reaches extreme distance; great for highway driving.Clip-on the flood protective cover and the light changes significantlyto a wide, flood beam pattern which illuminates all the surroundingsfor excellent short to medium distance vision.Read More


Product Description

Hard coated polycarbonate lens offers long term scratch resistance ensuring maximum optical efficiency for years tocome. UV stable AkzoNobel powder coat, polycarbonate lens and covers ensure long term durability. Genuine, highoutput OSRAM LED’s for unmatched performance.175W and 10,800 [9?] and 85W 6,450 [7?] effective lumens perlight. DURABLE EXTERIOR Hard coated polycarbonate lens offers long term scratch resistance ensuring maximumoptical efficiency for years to come. UV stable AkzoNobel powder coat, polycarbonate lens and covers ensure longterm durability. BUILT TOUGH Pressure die-cast aluminium housing and strong, 4mm thick steel bracket will handleeven the toughest tracks. HIGH OUTPUT OSRAM LED’S 19 genuine, high output OSRAM LED’s for unmatchedperformance. 85W and 6,450 effective lumens per light. MODERN ELECTRONICS DESIGN Built in Transistorswitching simplifies wiring installation by removing the need for traditional 12V relays. PWM dimming capability forbrightness control at the turn of a dial. (Wiring system sold separately) SEALED TIGHT Waterproof and submersible,IP67 & IP69K rated with Genuine GORE breather, to manage the internal air pressure of the light. ACTIVE TEMPERATURE CONTROL SYSTEM Intelligent onboard monitoring of the LED temperatures, combined with thesuperior cooling design allows for maximum output in all conditions. SUPERIOR COOLING DESIGN Large airintakes channel cool air over the heatsink for unmatched cooling efficiency, allowing for the use of higher-poweredLED’s. LIGHTWEIGHT DESIGN Compact in size, weighing just 1.7kg. Perfectly suited to nudge bar, and alternativeinstallations where size and weight restrictions apply. CHANGEABLE BEAM PATTERN Clip on/clip off protectivecovers allow for quick changes between beam patterns. 1 x Spot, 1 x Flood included.

Hardkorr XDD380 Double Row LED Bar72W

The XDD380 72W features the following: Dual Row Bar1 LUX @380 meters. LED Power: 72W. 6120 Total Lumens. OperatingVoltage: 10-30 DC. Waterproof rate: IP 67. 24pcs*3w highintensity OSRAM LEDS. Current draw:12V/ 3.2A?24V/ 1.6A. Color Temperature: 6000K. Life time: 50000 hours. Material:High grade aircraft aluminium housing. Lens material:Polycarbonate lens. Mounting Bracket: Alloy. Combo beam(spread and spot). Dimensions: (Height with feet = 111.2mm /Width = 390mm/ Depth = 86.5mm). Weight: 2.2kg. Certificates:CE, RoHs, EMC, C-Tick. Wiring harness available. Deutsch



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/round-driving-lights/night-hawke-7″-vli-series-led-driving-light/


connector included. 3 Year warranty.Read More


Product Description


KORR® has developed the new “XD Series”, which features intenselight powered by a new German Osram chip. The new developmentsare backed up with the latest design in reflector technology, whichthen enables these lights to throw light twice as far, using half thepower. Never have there been such dramatic gains in technology.LED Driving Lights are now as good, if not better than your HIDDriving Lights. Wider, whiter, longer, and less power than everbefore, the “XD Series” Driving Lights will set the benchmark forperformance and price. 1 LUX @ 440 meters. LED Power: 54W.5400 Total Lumens. Operating Voltage: 11-38 DC. Waterproof rate:IP 68. 18pcs 3w high intensity OSRAM LEDS. Currentdraw:12V/4.5A?24V/2.25A. Color Temperature: 5500-6000K. Lifetime: 50000 hours. Material: High grade aircraft aluminium housing.Lens material: Polycarbonate lens. Mounting Bracket: Alloy.Combo Beam (spot & flood). Dimensions: (Height with feet =72mm / Width = 820mm/ Depth = 70mm). Dimensions: (Heightwith end mounts= 80mm Width = 880mm/ Depth = 70mm). Weight:3.0kg. Certificates: CE, RoHs, EMC, C-Tick. Wiring harnessavailable. Deutsch connector included. 3 Year warranty.Read More


Product Description

Hardkorr XDD500 Double Row LED Bar

The XDD500 120W Dual Row Bar features 1 LUX @ 500 meters. LED Power: 120W. 10200 Total Lumens. Operating Voltage: 10-30 DC. Waterproof rate: IP 67. 40pcs*3w high intensity OSRAMLEDS. Current draw:12V/ 5.8A?24V/ 2.9A. Color Temperature:6000K. Life time: 50000 hours. Material: High grade aircraftaluminium housing. Lens material: Polycarbonate lens. MountingBracket: Alloy. Combo beam (spread and spot). Dimensions:(Height with feet = 111.2mm / Width = 628.1mm/ Depth =86.5mm). Weight: 3.3kg. Certificates: CE, RoHs, EMC, C-Tick. Wiring harness available. Deutsch connector included. 3 Yearwarranty.Read More



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/light-bars/hardkorr-xdd380-double-row-led-bar-72w/




https://www.dentsnall4x4accessories.co.za/catalogue/lighting/light-bars/hardkorr-xdd500-double-row-led-bar/


Product Description

Night Hawk 9? VLI Series LED

Each light is supplied with two protective covers which allow theuser to change the beam pattern quickly and easily. With the spotprotective cover fitted, the light projects a clean, focused spot beampattern which reaches extreme distance; great for highway driving.Clip-on the flood protective cover and the light changes significantlyto a wide, flood beam pattern which illuminates all the surroundingsfor excellent short to medium distance vision.Read More


Product Description

Hard coated polycarbonate lens offers long term scratch resistance ensuring maximum optical efficiency for years tocome. UV stable AkzoNobel powder coat, polycarbonate lens and covers ensure long term durability. Genuine, highoutput OSRAM LED’s for unmatched performance.175W and 10,800 [9?] and 85W 6,450 [7?] effective lumens perlight.DURABLE EXTERIOR Hard coated polycarbonate lens offers long term scratch resistance ensuring maximum opticalefficiency for years to come. UV stable AkzoNobel powder coat, polycarbonate lens and covers ensure long termdurability. BUILT TOUGH Pressure die-cast aluminium housing and strong, 4mm thick steel bracket will handle eventhe toughest tracks. HIGH OUTPUT OSRAM LED’S 19 genuine, high output OSRAM LED’s for unmatchedperformance. 85W and 6,450 effective lumens per light. MODERN ELECTRONICS DESIGN Built in Transistorswitching simplifies wiring installation by removing the need for traditional 12V relays. PWM dimming capability forbrightness control at the turn of a dial. (Wiring system sold separately) SEALED TIGHT Waterproof and submersible,IP67 & IP69K rated with Genuine GORE breather, to manage the internal air pressure of the light. ACTIVE TEMPERATURE CONTROL SYSTEM Intelligent onboard monitoring of the LED temperatures, combined with thesuperior cooling design allows for maximum output in all conditions. SUPERIOR COOLING DESIGN Large airintakes channel cool air over the heatsink for unmatched cooling efficiency, allowing for the use of higher-poweredLED’s. LIGHTWEIGHT DESIGN Compact in size, weighing just 1.7kg. Perfectly suited to nudge bar, and alternativeinstallations where size and weight restrictions apply. CHANGEABLE BEAM PATTERN Clip on/clip off protectivecovers allow for quick changes between beam patterns. 1 x Spot, 1 x Flood included.

ARB 40 LED Light Bar

The AR40 Intensity LED Light Bar is designed to integrate with thetop tube of the bull bar, the AR40’s extruded alloy housing wrapsaround the tube, providing a low profile that doesn’t obstruct thedriver’s view (as per Australian Design Rule ADR42/04 Section 12)of the road. Its unique tube clamp mounting system sits out of view




https://www.dentsnall4x4accessories.co.za/catalogue/lighting/round-driving-lights/night-hawk-9″-vli-series-led/


and delivers incredible stability for off road use, eliminatingvibration while being adjustable so that it won’t interfere with aerialmounting tabs, leaving them free to be used for their intendedfunction. Output: 9200 raw lumens. Colour temperature: 5700K. Operating temperature: -40 degrees Celcius to 63 degrees Celcius. Power: 115W. Current draw: 8.0A at 14.4V.Read More


Product DescriptionEngineered in Australia and manufactured in the United States, using the same patented lens/reflector technology as ourexisting Intensity LED driving lights, the new ARB Intensity LED light bar features 40 individual LEDs (two rows of20) encased in a virtually indestructible polycarbonate lens and a powdercoated, extruded aluminium body withpressure die cast end caps.

ARB Intensity 32 LED Spotlight

Available in spot and flood beams, and featuring 32 LED’s with50,000+ hour lifespan. high pressure cast aluminium body forsuperior strength. Protected against radio frequency (RFI) andelectromagnetic (EMC) interference, the lights are also MIL810-STDG vibration certified and RoHS compliant. Deutsch DT06waterproof connectors. Over and under-voltage protection andintegrated thermal management for optimal operation. Multi-position stainless steel mounting bracket features a large footprint,versatile installation options, and a TIG weld for added strength.Read More


Product Description

ARB Intensity 21 LED Spotlight

Available in spot and flood beams, and featuring 21 LED’s with50,000+ hour lifespan. high pressure cast aluminium body forsuperior strength. Protected against radio frequency (RFI) andelectro-magnetic (EMC) interference, the lights are also MIL810-STDG vibration certified and RoHS compliant. Deutsch DT06waterproof connectors. Over and under voltage protection andintegrated thermal management for optimal operation. Multi-position stainless steel mounting bracket features a large footprint,versatile installation options, and a TIG weld for added strength. AGORE-TEX breather acts as a vent to protect against condensationand contaminants. Hard coated, durable protective cover offers anadditional shield against potential damage while off-roading. Virtually indestrucable polycarbonate lens provides protection



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/light-bars/arb-40-led-light-bar/


https://www.dentsnall4x4accessories.co.za/catalogue/lighting/round-driving-lights/arb-intensity-32-led-spotlight/


against road debris.Read More


Product Description

ARB Intensity Solis 36 Spotlight

The Intensity Solis range is available in dedicated spot whichconnect to a centralised dimming controller in the wiringloom. Measured as a pair of spot beams, the Solis boasts 1 lux @1462 metres. Individually, a single flood beam will achieve 1 lux @729 metres while one spot beam has an impressive 1032 metresthrow. Lights this bright need some level of containment, which iswhy Intensity Solis lights are sold standard with a 5-stagedimmability switch. The ability to dim driving lights is perfect forwhen you’re approaching highly reflective road signs and is alsoreally effective in low visibility scenarios (such as dust).Read More


Product DescriptionThe combination of 6x 10 watt and 30x 4 watt performance OSRAM LEDs with a highly tuned reflector design hasbrought the Intensity Solis to the top of the class in light output.



https://www.dentsnall4x4accessories.co.za/catalogue/lighting/round-driving-lights/arb-intensity-21-led-spotlight/


https://www.dentsnall4x4accessories.co.za/catalogue/lighting/round-driving-lights/arb-intensity-solis-36-spotlight/


STEDI Carling Type Rocker Switches

Documents

Transcript of STEDI Carling Type Rocker Switches