STC TEST REPORT

STC TEST REPORT Date: 2016-05-04 of 7

No.: SP125036

STC (Shanghai) Company Limited No.130, Huashen Road, Waigaoqiao Free Trade Zone, Shanghai, China (Zip code: 200131)

Tel: (86 21) 52198248 Fax: (86 21) 52198249 Homepage:www.shstc.org Email:[email protected] This report shall not be reproduced unless with prior written approval from STC (Shanghai ) Company Limited.

For conditions of Issuance of this test report, Please refer to the overleaf or homepage

Applicant :

Description of Samples : One (1) group of submitted samples said to be:

Date Samples Received : 2016-04-28

Date Tested : 2016-04-28 to 2016-05-12

Investigation Requested : 1. 84/500/EEC & 2005/31/EC ceramic articles intended to come into contact with foodstuffs: determination of the release of Lead and

Cadmium from ceramic ware.

2. Lead and Cadmium Released from Lip and Rim Area.

Conclusion : 1. The test result(s) of the submitted sample(s) complied with the test

requirement of 84/500/EEC & 2005/31/EC ceramic articles intended to

come into contact with foodstuffs: determination of the release of Lead

and Cadmium from ceramic ware.

HE Lijie, Bill

For and on behalf of

STC (Shanghai) Company Limited

http://www.shstc.org/

mailto:[email protected]





No.: SP125036

TEST RESULTS:

1. Ceramic Articles Intended to Come into Contact with Foodstuffs: Determination of the

Release of Lead and Cadmium from Ceramic Ware.

1.1 Determination of the Release of Lead and Cadmium from ceramic ware

Ref: 84/500/EEC & 2005/31/EC

Test Method: EN 1388-1:1996

Sample Identity Colour / Component

1 CX1430-99（teapot）

Specimen(s) Leachable lead Leachable cadmium Volume of acid used

(1) <0.1 mg/L <0.01 mg/L 443 mL

(2) <0.1 mg/L <0.01 mg/L 443 mL

(3) <0.1 mg/L <0.01 mg/L 443 mL

(4) <0.1 mg/L <0.01 mg/L 443 mL

Average: <0.1 mg/L <0.01 mg/L 443 mL

Classification: Category 2

Limit 4.0 mg/L 0.3 mg/L -

Notes: 1. mg/L denotes milligram per litre.

2. < denotes less than.

3. Limit is quoted from category 2 in 84/500/EEC & 2005/31/EC.


Ref: 84/500/EEC & 2005/31/EC Test Method: EN 1388-1:1996

Sample Identity Colour / Component

1 CX1430-99（cover）


(1) <0.1 mg/L <0.01 mg/L 32 mL

(2) <0.1 mg/L <0.01 mg/L 32 mL

(3) <0.1 mg/L <0.01 mg/L 32 mL

(4) <0.1 mg/L <0.01 mg/L 32 mL













No.: SP125036

TEST RESULTS:


Ref: 84/500/EEC & 2005/31/EC


Sample Identity Colour / Component 1 CX1430-99（cup）


(1) <0.1 mg/L <0.01 mg/L 295 mL

(2) <0.1 mg/L <0.01 mg/L 295 mL

(3) <0.1 mg/L <0.01 mg/L 295 mL

(4) <0.1 mg/L <0.01 mg/L 295 mL








Ref: 84/500/EEC & 2005/31/EC




(1) <0.1 mg/L <0.01 mg/L 200 mL

(2) <0.1 mg/L <0.01 mg/L 200 mL

(3) <0.1 mg/L <0.01 mg/L 200 mL

(4) <0.1 mg/L <0.01 mg/L 200 mL













No.: SP125036

TEST RESULTS:


Ref: 84/500/EEC & 2005/31/EC


Sample Identity Colour / Component 1 CX1429-99（dish）


(1) <0.1 mg/dm² <0.01 mg/dm² -

(2) <0.1 mg/dm² <0.01 mg/dm² -

(3) <0.1 mg/dm² <0.01 mg/dm² -

(4) <0.1 mg/dm² <0.01 mg/dm² -

Average: <0.1 mg/dm² <0.01 mg/dm² -

Classification: Category1

Limit 0.8 mg/dm² 0.07 mg/dm² -





Ref: 84/500/EEC & 2005/31/EC


Sample Identity Colour / Component 1 CX1431-99(cup)


(1) <0.1 mg/L <0.01 mg/L 276 mL

(2) <0.1 mg/L <0.01 mg/L 276 mL

(3) <0.1 mg/L <0.01 mg/L 276 mL

(4) <0.1 mg/L <0.01 mg/L 276 mL













No.: SP125036

TEST RESULTS:

2.1. Lead and Cadmium Released from Lip and Rim Area

Ref.: ASTM C927-80(Reapproved 2014)

Sample Identity Colour / Component 1 CX1430-99(cup)


(1) <0.1 mg/L <0.01 mg/L 335mL

(2) <0.1 mg/L <0.01 mg/L 335mL

(3) <0.1 mg/L <0.01 mg/L 335mL

(4) <0.1 mg/L <0.01 mg/L 335mL

(5) <0.1 mg/L <0.01 mg/L 335mL

(6) <0.1 mg/L <0.01 mg/L 335mL

Average: <0.1 mg/L <0.01 mg/L 335mL

Limit* <4 mg/L <0.4 mg/L --



3. *Limit reference to Society of Glass and Ceramic Decorators (SGCD).





(1) <0.1 mg/L <0.01 mg/L 126mL

(2) <0.1 mg/L <0.01 mg/L 126mL

(3) <0.1 mg/L <0.01 mg/L 126mL

(4) <0.1 mg/L <0.01 mg/L 126mL

(5) <0.1 mg/L <0.01 mg/L 126mL

(6) <0.1 mg/L <0.01 mg/L 126mL












No.: SP125036

TEST RESULTS:





(1) <0.1 mg/L <0.01 mg/L 100mL

(2) <0.1 mg/L <0.01 mg/L 100mL

(3) <0.1 mg/L <0.01 mg/L 100mL

(4) <0.1 mg/L <0.01 mg/L 100mL

(5) <0.1 mg/L <0.01 mg/L 100mL

(6) <0.1 mg/L <0.01 mg/L 100mL












No.: SP125036

The photo of submitted samples

********** End of Test Report **********



STC TEST REPORT Date: 2016-06-08 Page 1 of 4

No.: SP125038




Applicant :

Description of Samples : One (1) group of submitted samples said to be:

Date Samples Received : 2016-04-28

Date Tested : 2016-04-28 to 2016-06-07

Requirements Conclusion 1. Extractable Heavy Metals - (EC) No 1935/2004 PASS

2. Migration Of Heavy Metal - TECHNICAL GUIDE ON METAL AND ALLOYS USED IN FOOD CONTACT MATERILAS OF COUNCIL OF EUROPE RESOLUTION CM/RES (2013) 9

PASS

HE Lijie, Bill

For and on behalf of

STC (Shanghai) Company Limited







No.: SP125038

TEST RESULTS:

1. Extractable Heavy Metals - (EC) No 1935/2004

Method Used: Extracted the sample in 3%(w/v) acetic acid at 70C for 2 hour, analyzed by ICP-AES

Sample Identity Colour / Component Style

1 Stainless steel spoon -

2 Stainless steel tea ball -

Results

1 2

Note(s): - mg/dm2 = milligram per square decimeter Method dctected limit (mg/dm2): - Pb 0.002, Cd 0.002, Cr 0.002, Ni 0.002, Cu 0.002, Co 0.002, Sb 0.002

Test Item(s) Unit

Maximum Allowable Limit

Lead (Pb) mg/dm2 ND ND 0.01

Cadmium (Cd) mg/dm2 ND ND 0.005

Chromium (Cr) mg/dm2 ND ND 0.4

Nickel (Ni) mg/dm2 ND ND 0.1

Copper (Cu) mg/dm2 ND ND 0.5

Cobalt (Co) mg/dm2 ND ND 0.1

Antimony (Sb) mg/dm2 ND ND 0.005

Conclusion - Pass Pass







No.: SP125038

TEST RESULTS:

2. Migration Of Heavy Metal - TECHNICAL GUIDE ON METAL AND ALLOYS USED IN FOOD CONTACT MATERILAS OF COUNCIL OF EUROPE RESOLUTION CM/RES (2013) 9 Method Used: With relerence to EN 13130-1:2004, Analysis was performed by Inductively Coupled Argon Plasma Atomic Emission Spectrophotometer and Graphite Furnace Atomic Absorption Spectrometry Simulant Used: 0.5% citric acid (w/w) in aqueous solution Test Condition: 100°C for 2 hours The radio of surface area to volume: 1dm2/ kg

Sample Identity Colour / Component Style 1 Stainless steel spoon -

2 Stainless steel tea ball -

Test Item(s)

Unit

1st+2nd Migration 3rd Migration

MDL Result Maximum

Allowable Limit

Result Maximum Allowable

Limit 1 2 1 2

Aluminium(Al) mg/kg ND ND 35 ND ND 5 0.2 Antimony(Sb) mg/kg ND ND 0.28 ND ND 0.04 0.02 Chromium(Cr) mg/kg ND 0.14 1.75 ND ND 0.25 0.1 Cobalt(Co) mg/kg ND ND 0.14 ND ND 0.02 0.01

Copper(Cu) mg/kg ND ND 28 ND ND 4 0.1 Iron(Fe) mg/kg 1.30 3.15 280 ND 0.26 40 0.25

Manganese(Mn) mg/kg ND ND 12.6 ND ND 1.8 0.25 Molybdenum(Mo) mg/kg ND ND 0.84 ND ND 0.12 0.02 Nickel(Ni) mg/kg ND ND 0.98 ND ND 0.14 0.05 Silver(Ag) mg/kg ND ND 0.56 ND ND 0.08 0.03

Tin(Sn) mg/kg ND ND 700 ND ND 100 5 Vanadium(V) mg/kg ND ND 0.07 ND ND 0.01 0.005

Zinc(Zn) mg/kg ND ND 35 ND ND 5 1 Arsenic(As) mg/kg ND ND 0.014 ND ND 0.002 0.001 Barium(Ba) mg/kg ND ND 8.4 ND ND 1.2 0.25 Beryllium(Be) mg/kg ND ND 0.07 ND ND 0.01 0.005

Cadmium(Cd) mg/kg ND ND 0.035 ND ND 0.005 0.002 Lead(Pb) mg/kg ND ND 0.07 ND ND 0.01 0.005

Lithium(Li) mg/kg ND ND 0.336 ND ND 0.048 0.02 Mercury(Hg) mg/kg ND ND 0.021 ND ND 0.003 0.002 Thallium(Tl) mg/kg ND ND 0.0007 ND ND 0.0001 0.0001 Magnesium(Mg) mg/kg ND ND - ND ND - 0.5

Titanium (Ti) mg/kg ND ND - ND ND - 0.5 Conclusion - Pass -

Note(s): - ND = Not Detected

- MDL = Method Detected Limit

- mg/kg = milligram(s) per kilogram = ppm = part(s) per million







No.: SP125038

The photo of submitted samples

********** End of Test Report **********



STC TEST REPORT

Documents

Transcript of STC TEST REPORT