SPECIFICATION SHEET

TAFCO / TMP Company, Inc. Model: WIC Item #1

4/12/2013SPECIFICATION SHEET

ITEM# 1 - WALK-IN COOLER (1 REQ'D)

TAFCO / TMP Company, Inc. WIC

Walk-In Cooler, 10' 7-1/2" x 6' 9-1/2" x 7' 6-1/2", galvalume interior and exterior finish, embossed floorw/ interior ramp, view port in doors, 2 ea. 1' 0" x 4' 0" (2 tube) fluorescent light, 2 ea. 6" x 12" insidecorner trim strip, pre-assembled remote refrigeration w/ outdoor package1 year parts and labor warranty5 year compressor warranty

Mfr Qty Model Spec

ACCESSORIES

APPROVED ALTERNATES: BALLY, KOLPAK

PROVIDE SHOP DRAWINGS FOR REVIEW ANDAPPROVAL

AMPS MOCPMCAHPKWNEMAVOLTS CYCLE CONN

ELECTRICAL

PHASE AFF

10120 60 Direct11

ELECTRICAL 1 REMARKS

FOR LIGHTS & SWITCH

The Brazilian Embassy

TAFCO / TMP Company, Inc. Model: DFA38-88-DE Item #2


ITEM# 2 - LOW-PROFILE EVAPORATOR COIL +35 DEGREES (1 REQ'D)

TAFCO / TMP Company, Inc. DFA38-88-DE

Low-Profile Evaporator Coil +35 degrees, included in and part of Walk-In Cooler (Item 1)

<Included>

Mfr Qty Model Spec

ACCESSORIES



ELECTRICAL

PHASE AFF

.87120 60 Direct11

DIRECTSIZE

COLDSIZE

INDIRECTSIZE

HOTSIZE

HOTGPH

CONDENSERINLET SIZE

FILTEREDSIZE

CONDENSEROUTLET SIZE

WATER WASTE

HOTAFF

COLDAFF

FILTEREDAFF

3/4"1 1


TAFCO / TMP Company, Inc. Model: GLH100M44E Item #3


ITEM# 3 - COMPRESSOR +35 DEGREES (1 REQ'D)

TAFCO / TMP Company, Inc. GLH100M44E

Compressor +35 degrees, included in and part of Walk-In Cooler (Item 1)

Mfr Qty Model Spec

ACCESSORIES



ELECTRICAL

PHASE AFF

15 1208 60 Direct11


Focus Foodservice Model: FF1842G Item #4


ITEM# 4 - WALK-IN SHELVING (4 REQ'D)

Focus Foodservice FF1842G

Shelf, Wire, 18"W x 42"L, green epoxy coated finish

Mfr Qty Model Spec

ACCESSORIES

Shelf, Wire, 18"W x 48"L, green epoxy coatedfinish

FF1848G16Focus Foodservice

Post, 74"H, stationary, green epoxy coated withSaniGard™

FG074G20Focus Foodservice

APPROVED ALTERNATES: EAGLE, METRO

5 UNITS4 SHELVES PER UNITSPLIT SLEEVES INCLUDEDINSTALL BOTTOM SHELVES AT A MINIMUM OF10" AFFEQUALLY SPACE REMAINING SHELVES


Item #

JobFOODSERVICE, LLC

FOC

US

WIR

E SH

ELVIN

G

FOCUS SHELVING Wire Shelving

• Design: The open wire design of these heavy gauge chrome or epoxy coated shelves minimizes dust accumulation and allows a free circulation of air, greater visibility of stored items and greater light penetration.

• Versatile: FOCUS SHELVING can change as quickly as your needs change. By using various sizes, hundreds of shelving configurations become possible.

• Fast and Secure Assembly: Posts with the double groove visual guide feature, have circular grooves at 1" (25mm) intervals and are numbered at 2" (50mm) intervals. A tapered split sleeve (plastic) snaps together around each post. Tapered openings in the shelf corners slide over the tapered split sleeves to lock on the shelf. Shelf is assembled in minutes without the use of any special tools.

• Shelf Ribs: Run front to back, allowing you to slide items on and off shelves smoothly.

• Shelf Accessibility: Shelves can be adjusted at 1" (25mm) intervals along the entire length of the post.

• Durable: FOCUS wire shelving is available in two finishes: chromate & epoxy coated.

• Adjustable Feet: Bolt levelers compensate for uneven surfaces.

• Strength: Each shelf up to 48" in length is rated to supportup to 800 lbs. of uniformly distributed weight. Shelves longer than 48" support 600 lbs.

Focus Foodservice, LLC • 300 Knightsbridge Parkway, Suite 500 • Lincolnshire, IL 60069 • www.focusfoodservice.com

Focus Foodservice FF1842G Item#:4


FOODSERVICE, LLC

JobFOCUS SHELVING WIRE SHELVING

Length

Width

Width Length Approx. Pkd. Wt. Item No. Item No.(in) (mm) (in) (mm) (lbs.) (kg) Chromate Epoxy12 305 36 914 7 3.1 FF1236C FF1236GN12 305 48 1220 9 4.1 FF1248C FF1248GN12 305 60 1524 13 5.8 FF1260C FF1260GN14 355 24 610 6 2.7 FF1424C FF1424G14 355 30 760 7 3.2 FF1430C FF1430G14 355 36 910 8 3.6 FF1436C FF1436G14 355 42 1060 9.5 4.3 FF1442C FF1442G14 355 48 1220 10.5 4.7 FF1448C FF1448G14 355 60 1525 14 6.3 FF1460C FF1460G14 355 72 1825 17 7.7 FF1472C FF1472G18 455 18 455 5.6 2.55 FF1818CH -18 455 24 610 7 3.2 FF1824C FF1824G18 455 30 760 8 3.6 FF1830C FF1830G18 455 36 910 9.5 4.3 FF1836C FF1836G18 455 42 1060 11 5.0 FF1842C FF1842G18 455 48 1220 12 5.4 FF1848C FF1848G18 455 54 1370 14.5 6.6 FF1854C FF1854G18 455 60 1525 17 7.7 FF1860C FF1860G18 455 72 1825 20 9.1 FF1872C FF1872G21 530 24 610 8 3.6 FF2124C FF2124G21 530 30 760 9 4.1 FF2130C FF2130G21 530 36 910 11 5.0 FF2136C FF2136G21 530 42 1060 12 5.4 FF2142C FF2142G21 530 48 1220 14 6.4 FF2148C FF2148G21 530 54 1370 16 7.6 FF2154C FF2154G21 530 60 1525 18 8.2 FF2160C FF2160G21 530 72 1825 24 10.9 FF2172C FF2172G24 610 24 610 9 4.1 FF2424C FF2424G24 610 30 760 11 5.0 FF2430C FF2430G24 610 36 910 13 5.9 FF2436C FF2436G24 610 42 1060 15 6.8 FF2442C FF2442G24 610 48 1220 16 7.3 FF2448C FF2448G24 610 54 1370 18 8.6 FF2454C FF2454G24 610 60 1525 21 9.5 FF2460C FF2460G24 610 72 1825 26 11.8 FF2472C FF2472G30 760 36 910 33.2 15.1 FF3036CH -30 760 60 1525 53.4 24.3 FF3060CH FF3060GN

Wire Shelves

Split Sleeves

"S" Hooks

Posts

Used to “add-on” shelving units withonly two posts required.Item No. 93333 ChromateItem No. 93333GN Green Epoxy

Height Approx. Pkd. Wt. Item No. Item No.(in.) (mm) (lbs.) (kg) Chromate* Epoxy*7 190 0.5 0.2 FG007C FG007G13 368 1 0.5 FG013C FG013G33 876 2 0.9 FG033C FG033G54 1386 3 1.4 FG054C FG054G63 1589 3.5 1.6 FG063C FG063G74 1895 4 1.8 FG074C FG074G86 2200 5 2.3 FG086C FG086G

Posts are grooved at 1" (25mm) increments and numbered at 2" (50mm) increments. Posts are double grooved every 8" (203mm) for easy identification.

*Note: for mobile post use the prefix “FGN”

Focus Foodservice, LLC • 300 Knightsbridge Parkway, Suite 500 • Lincolnshire, IL 60069Phone 800-968-3918 • Fax 800-968-4129 • www.focusfoodservice.com

rev. 0311

Focus Foodservice FF1842G Item#:4


Item #

JobFOODSERVICE, LLC

FOC

US

DU

NN

AG

E SH

ELVES

DUNNAGE SHELVES • Superior Strength: Dunnage shelves offer

considerably more weight-bearing capacity than other Focus shelves. They can be combined with other Focus shelves to provide extra strength at the lower levels of a shelving unit where the heaviest loads will be placed. The 36" (91.4 cm) length shelf has a 1,600-pound (727 kg) uniformly distributed static load capacity, the 48" (121.9 cm) shelf holds up to 1,300-pounds (591 kg), and the 60" (152.5 cm) shelf holds up to 1,000 pounds (455 kg).

• Stress Resistance: The high static-load capacity of these dunnage shelves translate into an increased ability to stand up under the strain of unbalanced loads and the stress of materials repeatedly being placed on the shelf typical of a commercial food service operation.

• Shelf Construction: These dunnage shelves have the same tapered corners and split sleeves that accommodate the 1" (25 mm) posts used for other Focus shelving. They assemble easily, fit securely, and are compatible with same sized Focus wire shelving.

• Two-Piece Design: Removable wire deck fits over reinforced 1" (25 mm) square, tubular frame. It lifts off for easy, thorough cleaning.

• Smooth Loading & Unloading: The front-to-back upper ribs of the deck allow you to slide items on and off the shelves smoothly.

• Adjustable: Rolled grooves on the posts enable dunnage shelves to be positioned at desired levels in 1" (25 mm) increments.

• Finishes: Available in chrome-plated and green epoxy coated.


Focus Foodservice FG074G Item#:4


FOODSERVICE, LLC

Job DUNNAGE SHELVES

Shelves

Specifications

• Shelves: The shelf support frame is made of 1” (25 mm) square tubing. The removable wire deck is made from 5/16” (8.0 mm) diameter wire. Available in chrome-plated and green epoxy coated finishes.

• Posts: Posts have an outside diameter of 1” (25 mm) with rolled grooves in 1” (25 mm) increments along the entire length. Available in chrome-plated and green epoxy coated finishes.

�Important: Stability decreases as the ratio of height to width increases when heavier loads are placed on the upper shelves. Keep units as wide and low as possible, using the dunnage shelf as the bottom shelf. If two dunnage shelves are being used, both should be placed within the lower half of the unit. Dunnage shelves are not recommended for use in shelf carts or trucks.

Item No. ChromeItem No. Green Epoxy Coated

Width Length Approx Pkg Wt.

(in.) (cm) (in.) (cm) (lbs.) (kg)

FFSM1836CH FFSM1836GN 18 45.7 36 91.4 20.8 9.5

FFSM1848CH FFSM1848GN 18 45.7 48 121.9 27.4 12.5

FFSM1860CH FFSM1860GN 18 45.7 60 152.4 33.9 15.4

- FFSM2430GN 24 61 30 76 17.3 7.9

FFSM2436CH FFSM2436GN 24 61 36 91.4 25.3 11.5

FFSM2448CH FFSM2448GN 24 61 48 121.9 33.2 15.1

FFSM2460CH FFSM2460GN 24 61 60 152.4 41.2 18.7

Posts


Height Approx Pkg Wt.

(in.) (cm) (lbs.) (kg)

FG007C FG007G 7 17.8 0.5 0.2

FG013C FG013G 13 33 0.9 0.4

FG033C FG033G 33 83.8 2.0 0.9

FG054C FG054G 54 137.2 3.1 1.4

FG063C FG063G 63 160.0 3.6 1.6

FG074C FG074G 74 188.0 4.2 1.9

FG086C FG086G 86 218.4 4.9 2.2


rev. 0311

Focus Foodservice FG074G Item#:4


TAFCO / TMP Company, Inc. Model: WITS Item #5


ITEM# 5 - WALK-IN TRIM STRIPS (1 lt REQ'D)

TAFCO / TMP Company, Inc. WITS

Walk-In Trim Strips, included in and part of Walk-In Cooler (Item 1)


Focus Foodservice Model: FF1436C Item #6


ITEM# 6 - WALL SHELVES (3 REQ'D)

Focus Foodservice FF1436C

Shelf, Wire, 14"W x 36"L, chromate finish

Mfr Qty Model Spec

ACCESSORIES

Shelf, Wire, 14"W x 42"L, chromate finishFF1442C6Focus Foodservice

Wall Mount Post Set, 54" post height, includes:(1) post, top and bottom mounting brackets,(2) intermediate brackets, bolts to secure postto bracket, chromate finish, NSF

FWPS54CH5 stFocus Foodservice

Post Mount Wall Brackets, single, for 14" widthshelf, (2) chromate shelf caps and plastic splitsleeves, chromate finish,

FPMB14SCH12Focus Foodservice

Post Mount Wall Brackets, double, for 14"width shelf, (4) chromate shelf caps and plasticsplit sleeves, chromate finish, NSF

FPMB14DCH3Focus Foodservice


3 TIER3 SECTIONSWALL MOUNT BOTTOM SHELVES AT 60" AFFWALL MOUNT MIDDLE SHELVES AT 72" AFFWALL MOUNT TOP SHELVES AT 84"


Item #

JobFOODSERVICE, LLC

FOC

US

WIR

E SH

ELVIN

G











Focus Foodservice FF1436C Item#:6


FOODSERVICE, LLC


Length

Width


Wire Shelves

Split Sleeves

"S" Hooks

Posts






rev. 0311



Item #

JobFOODSERVICE, LLC

FOC

US

PO

ST-TY

PE A

ND

DIR

ECT W

ALL M

OU

NTS


For Wire ShelvesIdeal for storing items conveniently overhead or above work surfaces

Accommodate all 14" (35.5 cm), 18" (45.7 cm), 21" (53.0 cm), and 24" (61.0 cm) wide shelves. Wire lugs on brackets fit corner collar openings on shelves. Chrome plated shelf caps are included to cover openings in tops of shelves.

Choice of single or double supports. Double supports are used for continuous runs of shelving. Single supports are used at each end of a shelf. Available in chromate finish or green epoxy coated.

Post-Type Mounts• Versatile: Post-type mounting system can meet your

exact needs for wall shelving. Posts and supports are available to hold anything from a single small shelf to many tiers of shelving running continuously along a wall.

• Fast, Secure Assembly: Post has grooves along its entire length at 1" (25mm) intervals. Tapered plastic split-sleeves lock around any groove, and matching taper in opening of shelf collar creates secure positioning.

• Adjustable: Shelf supports and shelves can be positioned or repositioned on the post in 1" (25mm) increments.

Direct Mounts• One-piece construction: Brackets are securely

welded to the mounting plate for greater durability.

• Easy Installation: Because mounting plate is welded to the bracket, it is much easier to align and install bracket to a wall.

• Save Space: The back of the shelf is within a fraction of an inch from the wall.

Available for 12" wide shelving

POST-TYPE AND DIRECT WALL MOUNTS

Focus Foodservice, LLC • 120 Lakeview Parkway • Vernon Hills, IL 60061 • www.focusfoodservice.com

Focus Foodservice FWPS54CH Item#:6


FOODSERVICE, LLC

JobPOST-TYPE AND DIRECT WALL MOUNTS For Wire Shelves

Posts

Shelf Brackets- Post Mounted

Post Height

DescriptionItem No.

ChromateItem No.

Green Epoxy(in.) (cm)

13 33.0 Post for single tier FWPS13CH FWPS13GN

24 61.0 Post for 2 tiers FWPS24CH FWPS24GN



63 160.0 Post for 4 tiers FWPS63CH —

Shelf Width

DescriptionItem No.

ChromateItem No.


14 35.6 Single Bracket FPMB14SCH FPMB14SGN


21 53.0 Single Bracket FPMB21SCH —


14 35.6 Double Bracket FPMB14DCH FPMB14DGN


21 53.0 Double Bracket FPMB21DCH —


Direct Wall MountsShelf Width

DescriptionItem No.

ChromateItem No.


12 30.5 Single Bracket FWB12SCH FWB12SGN

14 35.6 Single Bracket FWB14SCH FWB14SG




12 30.5 Double Bracket FWB12DCH FWB12DGN

14 35.6 Double Bracket FWB14DCH FWB14DG




Direct Wall Mounts Each consists of a shelf support welded to a mounting plate with two chrome plated shelf caps. Use single brackets at shelf ends and double brackets for adjoining shelves. Hardware to mount brackets to wall is NOT included. Please select according to type of wall. Order shelves separately.

DimensionsPost-Type Wall Mounts Each post assembly includes one post and 2 mounting brackets (top and bottom). One interme-diate bracket is supplied with 33" posts and 2 are supplied with 54" and 63" posts for greater security. Hardware to mount brackets to wall is NOT included. Please select according to type of wall. Order shelves separately.


rev. 0311



Eagle Group Model: CUSTOM Item #7


ITEM# 7 - WALL CABINETS (2 REQ'D)

Eagle Group CUSTOM

Stainless Steel Wall Cabinets - to measure (1) 4' x 1' x 3'-6"H and (1) @ 5' x 1' x 3'-6"H. Stainless steelclad construction with (2) glass shelves with glass inserts on front of doors.Note: Blocking in wall by others. Electrical by others.

Mfr Qty Model Spec

ACCESSORIES



Cambro Model: CD2020110 Item #8


ITEM# 8 - RACK DOLLY (2 REQ'D)

Cambro CD2020110

Camdolly®, 22-1/2"D x 22-1/2"L x 8-1/4"H, without handle, polyethylene construction, (4) 3" heavyduty swivel casters, load capacity 300 lbs., black, NSF

Mfr Qty Model Spec

ACCESSORIES

APPROVED ALTERNATES: METRO, KELMAX


6

Item No.Specifier Identification No.

Model No.

Quantity

© 2002 Cambro Manufacturing Company 5801 Skylab Road, Huntington Beach, California 92647-2056-U.S.A.T e l e p h o n e (1)714 848 1555 Toll Free 800 854 7631 Customer Service Hot Line 800 833 3003LIT FCST-0102-06

Features & Benefits• Make any job easier by smoothly transporting stacks of full

size 20" x 20" (50 cm x 50 cm) dish racks with these ruggedand reliable Camdollies. The CDR2020 and CDR2020H modelswill transport side by side stacks of half size dish racks also.

• Load capacity:Model CD2020 - 300 lbs. (136 Kg.)Model CDR2020 - 350 lbs. (159 Kg.)Models CD2020H, CDR2020H, CD2020HB - 350 lbs. (159 Kg.)

• Material design:Models CD2020, CD2020H, CD2020HB - One piece seamless,double-wall, high-density polyethylene construction is extremely durable. Won't rust or corrode. Foamed-in-place polyurethane core adds greater structural strength and reduces noise. Molded in handle on Model CD2020H and CD2020HB is extra sturdy and will not break or bend. Provides controlled handling and maneuvering over the roughest terrain. Models CDR2020 and CDR2020H - Injection molded high-density polypropylene offers exceptional performance with improved affordability. Will handle the demands of any foodservice operation. Won't rust or corrode. Weighs 40% less thanthe CD2020 for improved ease of handling and carryingwhen empty. A chrome handle on the CDR2020H offerseasy maneuvering.

• Simple to clean - all can be wiped down or steam cleaned.• Casters:

Models CD2020, CD2020H - Four each 3" (7,6 cm) heavy-duty,swivel casters, no brake. Bolted into molded-in steel plates.Model CD2020HB - Two each rear 10" (25,4 cm) Easy Wheelsand 2 each 5" (12,7 cm) swivel casters, 1 w/ brake. Bolted into molded-in steel plates.Models CDR2020, CDR2020H - Four each 4" (10 cm) swivel casters, no brake.

• No assembly required for models CD2020, CD2020H and CD2020HB. Minimal assembly required for CDR2020 and CDR2020H.

• Colors:Models CD2020, CD2020H and CD2020HB available in 7 colors.Models CDR2020 andCDR2020H available in Soft Gray (151) only.

For Dish RacksWithout HandleModel CD2020, CDR2020With HandleModels CD2020H, CD2020HB, CDR2020H

Camdollies®

Approvals

CD2020, CD2020H, CD2020HB only.

CD2020

CD2020H

CD2020HB

For Camracks™

10" (25,4 cm)Easy Wheels

CDR2020H

CDR2020

Cambro CD2020110 Item#:8


© 2002 Cambro Manufacturing Company 5801 Skylab Road, Huntington Beach, California 92647-2056-U.S.A.T e l e p h o n e (1)714 848 1555 Toll Free 800 854 7631 Customer Service Hot Line 800 833 3003

Printed in USA

Item No.Specifier Identification No.

Model No.

Quantity

Camdollies®

Standard Colors (CD2020, CD2020H, CD2020HB)❏ Coffee Beige (157) ❏ Dark Brown (131) ❏ Black (110)❏ Slate Blue (401) ❏ Gray (180) ❏ Brick Red (402) ❏ Green (519)

Load Interior Dimensions Exterior Dimensions Case lbs./cubeCode Description Capacity W x L L x W x H Kg/m3

Without HandleCD2020 Camdolly 300 lbs 201⁄16" x 201⁄16" 221⁄2" x 221⁄2" x 81⁄4" 19 (2.14)

(136 Kg) (51 x 51 cm) (57 x 57 x 21 cm) 9 (0,06)CDR2020 Camdolly 350 lbs 207⁄8" x 207⁄8" 213⁄8" x 213⁄8" x 7" 113⁄4 (1.14)

(159 Kg) (53 x 53 cm) (54 x 54 x 18 cm) 5,3 (0,03)With HandleCD2020H Camdolly 350 lbs 201⁄4" x 201⁄4" 251⁄2" x 22 1⁄4" x 361⁄2" 321⁄4 (11.45)

(159 Kg) (52 x 52 cm) (65 x 57 x 93 cm) 15 (0,32)CDR2020H Camdolly 350 lbs 207⁄8" x 207⁄8" 251⁄8" x 21 3⁄8" x 36" 211⁄2 (3.25)

(159 Kg) (53 x 53 cm) (64 x 54 x 91 cm) 9,7 (0,1)CD2020HB Camdolly 350 lbs 201⁄2" x 205⁄8" 27" x 26 1⁄8" x 361⁄2" 46 (15.89)

(159 Kg) (52 x 52 cm) (69 x 66 x 93 cm) 21 (0,44)

Architect Specs

Approvals

CD2020, CD2020H, CD2020HB only.

Specifications Dimension Tolerance: +/- 1/4" (0,64 cm)

The dish rack transport cart shall be a Camdolly, Cambro Model......manufactured by CambroMfg. Co., Huntington Beach, CA 92648 U.S.A. Models CD2020, CD2020H and CD2020HB shallbe constructed of single-molded, seamless, double wall, high-density polyethylene and thickfoam injected polyurethane. Models CDR2020 and CDR2020H shall be constructed of injectionmolded polypropylene. It shall be available with a load capacity of either 300 or 350 lbs.(136 or 159 Kg). It shall be available with a molded-in handle or a chrome handle. ModelsCD2020, CD2020H and CD2020HB shall be available with 4 each 5" (12,7 cm) swivel casters,no brake, or with 2 each 10" (25,4 cm) Easy Wheels and 2 each 5" (12,7 cm) swivel casters,1 w/ brake. Casters shall be bolted into molded-in metal plates. Models CDR2020 andCDR2020H shall be available with 4 each 4" (10 cm) swivel casters, no brake. Models CDR2020and CDR2020H shall be available in 1 color and shall require minimal assembly. ModelsCD2020, CD2020H and CD2020HB shall be available in 7 colors and require no assembly.

Standard Colors (CDR2020, CDR2020H)❏ Soft Gray (151)

CD2020 CDR2020H CDR2020

CD2020H CD2020HB

For Dish RacksWithout HandleModel CD2020, CDR2020With HandleModels CD2020H, CD2020HB, CDR2020H

Cambro CD2020110 Item#:8


Eagle Group Model: CDTR-60-16/3 Item #9


ITEM# 9 - CLEAN DISHTABLE (1 REQ'D)

Eagle Group CDTR-60-16/3

Clean Dishtable, straight design, 60"L, for left-to-right operation, 16 gauge type 304 stainless steel top,galvanized tubular legs, crossrails & gussets, adjustable feet, NSF

Mfr Qty Model Spec

ACCESSORIES

End splash, per end, all heights (RIGHT END)E301Eagle Group

Stainless steel legs, gussets & feet for lengthsup to 72", straight

-SLGF1Eagle Group

APPROVED ALTERNATES: ADVANCE, SELECTSTAINLESS



Foodservice Division: Phone 800-441-8440MHC/Retail Display Divisions: Phone 800-637-5100

EG50.00 Rev. 06/09

CatalogSpecification

SheetNo.

EG50.00

CleanD

ishtables—StraightD

esign

EAGLE GROUP100 Industrial Boulevard, Clayton, DE 19938-8903 USAPhone: 302-653-3000 • Fax: 302-653-2065www.eaglegrp.com

Options / Accessories *UndershelfStainless steel legsStainless steel gussetsStainless steel feet

Eagle Foodservice Equipment, Eagle MHC, SpecFAB®, and Retail Display are divisions of Eagle Group. ©2009 by the Eagle Group

Item No.:Project No.:

S.I.S. No.:

Clean Dishtables—Straight Design

Specification Sheet

Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com

For custom configuration or fabrication needs, contact our SpecFAB® Division.Phone: 302-653-3000 • Fax: 302-653-3091 • e-mail: [email protected]

MODELS:CDTL-24-16/4CDTL-24-16/3CDTL-24-14/3CDTR-24-16/4CDTR-24-16/3CDTR-24-14/3CDTL-30-16/4CDTL-30-16/3CDTL-30-14/3CDTR-30-16/4CDTR-30-16/3CDTR-30-14/3CDTL-36-16/4CDTL-36-16/3CDTR-36-14/3CDTR-36-16/4CDTR-36-16/3CDTR-36-14/3

Design and Construction Features• 14 or 16 gauge stainless steel.• 30˝ (762mm)-wide table furnished in nine lengths.

• 11⁄2˝ (38mm) raised rolled rim on front and end.

• 15⁄8˝ (41mm)-diameter galvanized legs with welded1˝ (25mm)-diameter crossbracing.

• 8˝ (203mm)-high backsplash.• Adjustable non-marking bullet feet with up to 1˝ (25mm)adjustment.

• All Spec-Master® 14 gauge type 304 dishtables comestandard with stainless steel crossbraced legs and gussets,complete with metal feet.

Certifications / Approvals

CDTL-84-16/4CDTL-84-16/3CDTL-84-14/3CDTR-84-16/4CDTR-84-16/3CDTR-84-14/3CDTL-96-16/4CDTL-96-16/3CDTL-96-14/3CDTR-96-16/4CDTR-96-16/3CDTR-96-14/3CDTL-120-16/4CDTL-120-16/3CDTL-120-14/3CDTR-120-16/4CDTR-120-16/3CDTR-120-14/3

CDTL-48-16/4CDTL-48-16/3CDTL-48-14/3CDTR-48-16/4CDTR-48-16/3CDTR-48-14/3CDTL-60-16/4CDTL-60-16/3CDTL-60-14/3CDTR-60-16/4CDTR-60-16/3CDTR-60-14/3CDTL-72-16/4CDTL-72-16/3CDTL-72-14/3CDTR-72-16/4CDTR-72-16/3CDTR-72-14/3

right-hand model shown with optional undershelf *(dishwasher not included)

* See Spec Sheet #EG50.07 for full line of options and accessories.

Short Form SpecificationsEagle Clean Dishtables, model ___________. Top to be16/430, 16/304, or 14/304 stainless steel, with all seamswelded, ground smooth, and polished. Front and ends to have3˝-high upturn with 11⁄2˝-diameter rolled edge. Galvanized hatchannels welded to underside. Backsplash is 8˝-high. 201⁄2˝standard opening for dishwasher. Legs to be 15⁄8˝ O.D.galvanized tubing, 1˝ diameter crossbracing and adjustablebullet feet (14/304 models come standard with stainless steelhat channels welded to underside of table, stainless steelcrossbraced legs, and adjustable metal feet).

Eagle Group CDTR-60-16/3 Item#:9


Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.comAlthough every attempt has been made to ensure the accuracy of the information provided, we cannot be held responsible for

typographical or printing errors. Information and specifications are subject to change without notice. Please confirm at time of order.

Cata

log

Spec

ifica

tion

Shee

tNo.

EG50

.00

Clea

nD

isht

able

s—St

raig

htD

esig

nItem No.:

Project No.:S.I.S. No.:

Rev. 06/09

Printed in U.S.A.©2009 by Eagle GroupFoodservice Division: Phone 800-441-8440

MHC/Retail Display Divisions: Phone 800-637-5100


Clean Dishtables—Straight Design

FRONT VIEW

TOP VIEW

SIDE VIEW

Spec-Master®

16 gauge 16 gauge 14 gaugetype 430 type 304 type 304 length weightmodel # model # model # description in. mm lbs. kg

CDTL-24-16/4 CDTL-24-14/3 CDTL-24-16/3 left-hand model 24˝ 610 36 16.3CDTR-24-16/4 CDTR-24-16/3 CDTR-24-14/3 right-hand model 24˝ 610 36 16.3CDTL-30-16/4 CDTL-30-16/3 CDTL-30-14/3 left-hand model 30˝ 762 42 19.1CDTR-30-16/4 CDTR-30-16/3 CDTR-30-14/3 right-hand model 30˝ 762 42 19.1CDTL-36-16/4 CDTL-36-16/3 CDTL-36-14/3 left-hand model 36˝ 914 49 22.2CDTR-36-16/4 CDTR-36-16/3 CDTR-36-14/3 right-hand model 36˝ 914 49 22.2CDTL-48-16/4 CDTL-48-16/3 CDTL-48-14/3 left-hand model 48˝ 1219 63 29.6CDTR-48-16/4 CDTR-48-16/3 CDTR-48-14/3 right-hand model 48˝ 1219 63 29.6CDTL-60-16/4 CDTL-60-16/3 CDTL-60-14/3 left-hand model 60˝ 1524 77 34.9CDTR-60-16/4 CDTR-60-16/3 CDTR-60-14/3 right-hand model 60˝ 1524 77 34.9CDTL-72-16/4 CDTL-72-16/3 CDTL-72-14/3 left-hand model 72˝ 1829 91 41.3CDTR-72-16/4 CDTR-72-16/3 CDTR-72-14/3 right-hand model 72˝ 1829 91 41.3CDTL-84-16/4 CDTL-84-16/3 CDTL-84-14/3 left-hand model 84˝ 2134 105 47.6CDTR-84-16/4 CDTR-84-16/3 CDTR-84-14/3 right-hand model 84˝ 2134 105 47.6CDTL-96-16/4 CDTL-96-16/3 CDTL-96-14/3 left-hand model 96˝ 2438 119 54.0CDTR-96-16/4 CDTR-96-16/3 CDTR-96-14/3 right-hand model 96˝ 2438 119 54.0CDTL-120-16/4 CDTL-120-16/3 CDTL-120-14/3 left-hand model 120˝ 3048 147 66.7CDTR-120-16/4 CDTR-120-16/3 CDTR-120-14/3 right-hand model 120˝ 3048 147 66.7

Eagle Group CDTR-60-16/3 Item#:9



EG10.50 Rev. 04/12

Catalog Specification Sheet No.

EG10.50

Table Modifications




S.I.S. No.:

Table Modificationsand Accessories

Specification Sheet




(fabricated to NSF-applicable standards)

Refer to chart below fordescription of E# models.

For complete list of E# models and description, see chartbelow and chart on back page.

* For GFI receptacle, add “-GFI” to E number (example: E18.1-GFI).

E10 Square edge table - front and/or rearE11 Marine counter edgeE12 “V” type marine edge (not available in 16/430)E13 Bullnose edge 300698 Casters - 4˝ (102mm)-diameter with brake300699 Casters - 4˝ (102mm)-diameter without brake317635 Casters - 5˝ (127mm)-diameter with brake317636 Casters - 5˝ (127mm)-diameter without brake300692 Bullet feet - stainless steel301036 Bullet feet - white metal300293 Bullet feet - plastic

313835 Stainless steel flanged bullet feetE15 Vertical tray dividers - 4-section assembly, 3˝ on centers E17 Special height legsE18* Duplex receptacle and mounting plate (under table)E18.1* Duplex receptacle in splash (requires at least 6˝-high splash)E18.2* Pedestal duplex receptacle (top of table or overshelf)E19 Stainless steel gussets

606329 Scrap chute, 6˝ (152mm)-diameter606331 Knife rack (fits rolled rim, poly, and square edge tables)

model # description model # description

model # descriptionNOT PICTURED

marine edgesquare edge bullnose edgemarine counter edge

Eagle Group E30 Item#:9




Cata

log

Spec

ifica

tion

Shee

t No.

Tabl

e M

odifi

catio

nsItem No.:


Rev. 04/12




EG10

.50


sink on left/right side of table sink with faucet on end of tablesink on center of table

Optional Sinks Built Into Tables – Standard Locations

Sinks — complete with faucet and basket drain (Specify location)E20 - 10˝ x 14˝ x 9.5˝ bowl (254 x 356 x 241mm)E21 - 14˝ x 16˝ x 9.5˝ bowl (356 x 406 x 241mm)E22* - 16˝ x 20˝ x 8˝ bowl (406 x 508 x 203mm)E23* - 16˝ x 20˝ x 14˝ bowl (406 x 508 x 356mm)E24* - 18˝ x 20˝ x 14˝ bowl (457 x 508 x 356mm)E24A* - 20˝ x 20˝ x 14˝ (508 x 508 x 356mm)E25 - 24˝ x 24˝ x 14˝ bowl (610 x 610 x 356mm)

for 36˝ (914mm)-wide tables313304 T&S faucet upgrade - deck mount 4˝ (102mm) centers300720 Lever drain - 1.5˝ I.P.S. (38mm)300721 Lever drain - 2˝ I.P.S. (51mm)300722 Lever drain - 2˝ I.P.S. (51mm) with overflow341189** Twist handle drain - 1.5˝ I.P.S. (38mm)336002** Twist handle drain - 2˝ I.P.S. (51mm)341190** Twist handle drain - 2˝ I.P.S. (51mm) with overflowE27 Top cutout - square or round (Specify location)E28 Angle slides for pans, up to six pairs

(Specify location and pan size)E29 Urn trough, 4.5˝ wide x 1.25˝ deep (114 x 32mm) with

1.5˝ (38mm) drain, complete with louvered grate. (Length must be maximum of 6˝ shorter than table. Specify location.)

E30 End splash — per end (Specify end), all heights E31 1.5˝ (38mm) rear upturn for undershelfE32 Can opener hole with under table support (Specify location)E33 Sink splash — single thickness, 4˝ tall (102mm)E34 Column cutout (Send floor plan/sketch)

E35 16 gauge s/s apron in front of sinks or cutoutsE36 Fully welded - top, undershelf & legsE36A Welded base only - undershelf & legsE37 NSF sprayed-on sound deadening up to 12´ (3658mm)E37A - for each additional foot E38-6*** Cantilever mount up to 6´ (1829mm) - add to wall shelf priceE38-12*** Cantilever mount up to 12´ (3658mm)E39 Enclosed backsplash

* These sink bowls will not fit in a table any less than 30˝ (762mm) wide. ** Optional twist drain brackets available for use with twist handle drains.

*** Applicable to wall mount shelves and pot racks.

model # description


Refer to chart at right fordescription of E# models.



Champion Model: DH-2000 Item #10


ITEM# 10 - DISHWASHER, DOOR TYPE (1 REQ'D)

Champion DH-2000

Versa-Clean Dishwasher, door type, high temperature with built-in 40° and 70° F rise electric booster,self-draining pump, 55 racks/hour capacity, auto-fill, stainless steel construction, electric tank heat,NSF, UL, 1hp, ENERGY STAR®

Mfr Qty Model Spec

ACCESSORIES

One year limited warranty, standard1Champion

208v/60/1, 65.0 amps1Champion

APPROVED ALTERNATES: MEIKO, JACKSON


ELECTRICAL

PHASE AFF

65 1208 60 Direct11

DIRECTSIZE

COLDSIZE

INDIRECTSIZE

HOTSIZE

HOTGPH

CONDENSERINLET SIZE

FILTEREDSIZE


WATER WASTE

HOTAFF

COLDAFF

FILTEREDAFF

2"3/4" 49.51 1

PLUMBING 1 REMARKS

PLUMBER TO PROVIDE/INSTALL BACK FLOW PREVENTOR ON THIS UNIT IN ORDER TO COMPLY W/LOCAL HEALTH DEPARTMENT REGULATIONS


(1M) 8/09 Printed in U.S.A.

DH2000 High Temperature Door-type

Dishwashing Machine

Versa-Clean

Versa

-Clean

do

or-ty

pe

standard Features• EnErgyStar®Qualified• nEwExclusiveBuilt-in booster configured

for both 40° and 70° Rise

• nEwExclusiveField convertible to single or three phase, 208 or 240 volt, corner or straight through operation

• Rinse Sentry – ensures 180°F final rinse

• Auto start – starts unit when doors are closed

• High temperature

• Single point connection

• High efficiency 1 HP pump

• 55 racks per hour

• Self draining pump

• Automatic tank fill

• Detergent/chemical connections

• Interchangeable upper and lower arm

• Top mounted splash proof controls

• Automatic drain valve

speCiFier statementSpecified unit will be Champion model Versa-Clean, DH2000 high temperature door-type dishwashing machine.Features top mounted splash proof controls, Rinse Sentry, Auto start, interchangeable stainless steel wash and rinse arms, 55 racks/hr., .90 US gals/rack. 1 year parts and labor warranty.

Champion Industries, Inc. P. O. Box 4149, Winston-Salem, NC 27115

Tel: 336/661-1556 Fax: 336/661-1979 www.championindustries.com

ProjectItem No.Quantity

options & aCCessories Drain Tempering Kit

Side Panels

Champion DH-2000 Item#:10


DH2000 High TemperatureDoor-type Dishwashing Machine

Versa-CleanV

ersa

-Cle

an

do

or-

type

Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.Champion Industries, Inc., P. O. Box 4149, Winston-Salem, NC 27115 • 336/661-1556 • Fax: 336/661-1979 • www.championindustries.com

Shipping weight crated: 300 lbs. Dimensions shown in inches

Front View door Clearance

Corner Configuration

side View

typical table Construction

speCiFiCationsCapacities Racks per hr. (NSF rated) 55 Wash tank (gal.) 9.5

Motorhorsepower 1 HPwaterconsumption Gal. per hr. (max. use) 49.5 Gal. per rack .90

temperature°F Wash 150 Rinse 180

Heating Tank heat, electric 5.2 kW Electric Booster 7.5 kW

timecycleinseconds Wash 40 Dwell 1 Rinse 12 Sanitary Dwell 7 Total cycle 60

warning: Plumbing, electrical connections should be made by qualified personnel who will observe all the applicable plumbing, sanitary and safety codes and the National Electrical Code.

Plumbingnote:Because of variation in house-supplied water pressure, pressure regulating valves (PRV’s) for incoming water may be needed. The PRV’s can be purchased from Champion or obtained locally.

Electric40°/70°riseBooster Minimum Maximum SupplyCkt. Overcurrent rated Conductor Protective Voltage amps ampacity Device 208/60/1 65 80 80 240/60/1 75 80 80 208/60/3 40 50 50 240/60/3 45 50 50

plan View

straight through operation

‘USGBC’ and related logo is a trademark owned by the U.S. Green Building Council and is used by permission.

utilities1 water

3/4" NPT

2 Electricala. 208-240/60/1B. 208-240/60/3

3 Draina. 2" fit hose

67"

19-1/8"

19-1/8"

3-1/4"

18-1/16" 13-1/8"

26"

3-3/16" 18-1/8"

4-1/2"

33-3/4"

59-1/8"

18-3/4"

6" Floor Clearance

17-5/8" 13-1/8"

13-1/8"

13-1/8"

26-1/8"

30-7/8"

6-1/2"

65-1/4"

20-3/16" InsideRails

76" Top ClearanceOpen Doors

17-3/8" Door

Clearance

Corner Con�guration

2

3

6" Min.[152]

6" Min.[152]

26-3/8"[669]

25-3/4"[656]

Champion DH-2000 Item#:10


Item #11


ITEM# 11 -

<Spare>


Eagle Group Model: SDTL-72-16/3 Item #12


ITEM# 12 - SOILED DISHTABLE (1 REQ'D)

Eagle Group SDTL-72-16/3

Soiled Dishtable, straight design, 72"L, for left-to-right operation, 8"H backsplash, 20" x 20" x 5" deeppre-rinse sink, scrap block, 16 gauge type 304 stainless steel top, rolled rim on front & side, galvanizedtubular legs, crossrails & gussets, adjustable feet, NSF

Mfr Qty Model Spec

ACCESSORIES

Stainless steel legs, gussets & feet for lengthsup to 72", straight

-SLGF1Eagle Group

Rack Slides, for dishtables3011241Eagle Group

Scrap Trough, 5"W x 2"D, 1-1/2" center drainopening, removable basket with handles,stainless steel construction

SCRAP TROUGH1Eagle Group

Disposal provision package, includes weldmentonly for collar which are furnished by others,control panel bracket weldment, and holes forpre-rinse & anti-siphon vacuum breaker

E411Eagle Group

No scrap block, add suffix "-NSB" to modelnumber, Deduct

1Eagle Group



DIRECTSIZE

COLDSIZE

INDIRECTSIZE

HOTSIZE

HOTGPH

CONDENSERINLET SIZE

FILTEREDSIZE


WATER WASTE

HOTAFF

COLDAFF

FILTEREDAFF

1-1/2"1 1

PLUMBING 1 REMARKS

FOR SCRAP TROUGH



EG50.02 Rev. 06/09


SheetNo.

EG50.02

SoiledD

ishtables—StraightD

esign


Options / AccessoriesRack slidesScrap basketScrap basket/rack slidecomboPrerinse unit



S.I.S. No.:

Soiled Dishtables—Straight Design

Specification Sheet



MODELS:SDTL-30-16/4SDTL-30-16/3SDTL-30-14/3SDTR-30-16/4SDTR-30-16/3SDTR-30-14/3SDTL-36-16/4SDTL-36-16/3SDTL-36-14/3SDTR-36-16/4SDTR-36-16/3SDTR-36-14/3SDTL-48-16/4SDTL-48-16/3SDTL-48-14/3SDTR-48-16/4

Design and Construction Features• 16 or 14 gauge stainless steel.• 30˝ (762mm)-wide table with choice of eight lengths.• Left or right hand operation.• 20˝ x 20˝ x 5˝ (508 x 508 x 127mm) prerinse sink punchedfor standard basket drain.

• Hole supplied for deck-mount prerinse.• Adjustable non-marking feet with up to 1˝ (25mm)adjustment.

• 15⁄8˝ (41mm)-diameter galvanized legs with welded1˝ (25mm)-diameter crossbrace.

• All Spec-Master® 14 gauge type 304 dishtables comestandard with stainless steel crossbraced legs and gussets,complete with stainless steel feet.

• Scrap block automatically provided on left-hand models48˝ (1219mm) and longer, and right-hand models 60˝(1524mm) and longer. To specify no scrap block desired,add suffix “-NSB” to model number.Example: SDTL-48-16/4-NSB


SDTL-84-14/3SDTR-84-16/4SDTR-84-16/3SDTR-84-14/3SDTL-96-16/4SDTL-96-16/3SDTL-96-14/3SDTR-96-16/4SDTR-96-16/3SDTR-96-14/3SDTL-120-16/4SDTL-120-16/3SDTL-120-14/3SDTR-120-16/4SDTR-120-16/3SDTR-120-14/3

SDTR-48-16/3SDTR-48-14/3SDTL-60-16/4SDTL-60-16/3SDTL-60-14/3SDTR-60-16/4SDTR-60-16/3SDTR-60-14/3SDTL-72-16/4SDTL-72-16/3SDTL-72-14/3SDTR-72-16/4SDTR-72-16/3SDTR-72-14/3SDTL-84-16/4SDTL-84-16/3

FaucetsUndershelfStainless steel legsStainless steel gussetsStainless steel feet

left-hand model shown with optional deck-mountprerinse unit (dishwasher not included)

Short Form SpecificationsEagle Soiled Dishtables, model _______________. Top to be16/430, 16/304, or 14/304 stainless steel with all seamswelded, ground smooth, and polished. Front and ends to have3˝-high upturn with a 11⁄2˝-diameter rolled edge. Galvanized hatchannels welded to underside. Backsplash is 8˝-high. 201⁄2˝opening for dishwasher. 20˝ x 20˝ x 5˝ deep stainless steelprerinse sink with basket drain, hole for deck mounted prerinsespray, and rubber scrap block provided. Legs to be 15⁄8˝ O.D.galvanized tubing with 1˝ diameter crossbracing and adjustablebullet feet (14/304 models come standard with stainless steelhat channels welded to underside of table, stainless steelcrossbraced legs, and adjustable metal feet).

Eagle Group SDTL-72-16/3 Item#:12


FRONT VIEW

TOP VIEW

(right-hand model shown)

Dimension A• 31⁄2˝ – for 30˝ & 36˝ tables L or R,and 48˝ left only.

• 15˝ – for 48˝ right and 60˝ & 72˝both L or R.

• 231⁄2˝ – for 84˝ & 96˝ tables.Please review dishwasher for sizeand location of control box.

SIDE VIEW



CatalogSp

ecificationSh

eetN

o.EG

50.0

2So

iled

Dis

htab

les—

Stra

ight

Des

ign


S.I.S. No.:

Rev. 06/09




Soiled Dishtables—Straight Design

* Scrap block provided with these models. To order one of these models with no scrap block, add suffix “-NSB” on end of model number. Example: SDTL-60-14/3-NSB

Spec-Master®

16 gauge 16 gauge 14 gaugetype 430 type 304 type 304 length weightmodel # model # model # description in. mm lbs. kg

SDTL-30-16/4 SDTL-30-16/3 SDTL-30-14/3 left-hand model 30˝ 762 42 19.1SDTR-30-16/4 SDTR-30-16/3 SDTR-30-14/3 right-hand model 30˝ 762 42 19.1SDTL-36-16/4 SDTL-36-16/3 SDTL-36-14/3 left-hand model 36˝ 914 49 22.2SDTR-36-16/4 SDTR-36-16/3 SDTR-36-14/3 right-hand model 36˝ 914 49 22.2SDTL-48-16/4* SDTL-48-16/3* SDTL-48-14/3* left-hand model 48˝ 1219 63 29.6SDTR-48-16/4 SDTR-48-16/3 SDTR-48-14/3 right-hand model 48˝ 1219 63 29.6SDTL-60-16/4* SDTL-60-16/3* SDTL-60-14/3* left-hand model 60˝ 1524 77 34.9SDTR-60-16/4* SDTR-60-16/3* SDTR-60-14/3* right-hand model 60˝ 1524 77 34.9SDTL-72-16/4* SDTL-72-16/3* SDTL-72-14/3* left-hand model 72˝ 1829 91 41.3SDTR-72-16/4* SDTR-72-16/3* SDTR-72-14/3* right-hand model 72˝ 1829 91 41.3SDTL-84-16/4* SDTL-84-16/3* SDTL-84-14/3* left-hand model 84˝ 2134 105 47.6SDTR-84-16/4* SDTR-84-16/3* SDTR-84-14/3* right-hand model 84˝ 2134 105 47.6SDTL-96-16/4* SDTL-96-16/3* SDTL-96-14/3* left-hand model 96˝ 2438 119 54.0SDTR-96-16/4* SDTR-96-16/3* SDTR-96-14/3* right-hand model 96˝ 2438 119 54.0SDTL-120-16/4* SDTL-120-16/3* SDTL-120-14/3* left-hand model 120˝ 3048 147 66.7SDTR-120-16/4* SDTR-120-16/3* SDTR-120-14/3* right-hand model 120˝ 3048 147 66.7

Eagle Group SDTL-72-16/3 Item#:12



EG50.07B Rev. 04/12


EG50.07B

Dishtable Accessories




S.I.S. No.:

Dishtable AccessoriesSpecification Sheet




shipping wt.model # lbs. kg301630 15 6.8

shipping wt.model # lbs. kg301124 4 1.8

shipping wt.model # lbs. kgSCRAP TROUGH 13 5.8

model # description300719 splash-mounted spray unit300718 deck-mounted spray unit301189 faucet add-on with 12˝ (305mm) spout301190 wall bracket

model # description313295 deck-mounted spray unit with wall bracket313297 faucet add-on with 12˝ (305mm) spout

model # description316743 stainless steel gussets

model # description300692 stainless steel301036 white metal300293 plastic

Rack Slide• 16 gauge construction.

Scrap Basket• This model features all-16 gauge stainless steel

construction. • Tabs provide proper height

and basket drainage.

Prerinse Basket with Slide Bar• An all-in-one combination. • Type 304 construction throughout.

Drain Trough• 5˝ (127mm) wide and 2˝ (51mm) deep

with a 11⁄2˝ (38mm) center drain opening. • Removable basket with handles. • All-stainless steel construction.

scrap trough

Prerinse Units…• Temperature adjustment for hot water

with preset cold water adjustment foranti-scald protection.

…T&S Extra Heavy Duty Prerinse Components• Top-of-the-line.

width x length x height shipping wt.model # in. mm lbs. kg606434 171⁄2˝ x 191⁄2˝ x 2˝ 445 x 493 x 51 3 1.4

Stainless Steel Gussets• Optional only for 16 gauge tables. • Standard on SPEC-MASTER® tables.

gusset

Bullet FeetWith a full 1˝ (25mm) adjustment.

…Standard Prerinse Components

Dishtable Undershelves• Provides extra space for rack

storage and operations equipment.

• 241⁄8˝ (612mm) wide. NOTE: Order one size smaller than dishtable.

shipping Galvanized 400 Series 300 Series length weight

model # model # model # in. mm lbs. kg605371 605374 606479 24˝ 610 10 4.5605372 605375 606480 36˝ 914 15 6.8605373 605376 606481 48˝ 1219 20 9.0

MODELS: 300*301*305428311722

313*316660316743351585

605*606*DTRA-24DVS-*

HDC*SCRAPTROUGH

* See charts for full model numbers.

See Spec Sheet #EG50.06 for optionalDishtable Racks.

See Spec Sheet #EG50.12 for optional LIFESTOR® Polymer Undershelf forDishtables.

Eagle Group 301124 Item#:12




Cata

log

Spec

ifica

tion

Shee

t No.

Dis

htab

le A

cces

sori

es

Rev. 04/12




EG50

.07B

corner dishtable with optional PVC rollers

Sink Covers • 18 gauge stainless steel with

holes provided for handling.

PVC Rollers• 2˝ (51mm) diameter. • Free-wheel. • For 14/304 dishtables only.• For ease of sliding racks.• For stainless steel rollers,

contact factory.

Three rollers required for every 12˝ (305mm). Example: For a 6� (1829mm)table, at the required three per foot: 6� table x 3 per foot = 18 rollers needed.

Standard only on SPEC-MASTER® seriesdishtables.

See Spec Sheet #EG50.07A for Dishtable Modifications.

model # description311772 crossbrace assembly316660 crossbrace assembly for undercounter dishtables300765 single leg for undershelf

width x length shipping wt.model # in. mm lbs. kg305428 20˝ x 20˝ 508 x 508 11 5.0351585 16˝ x 20˝ 406 x 508 10 4.5

length shipping wt.model # in. mm lbs. kgDTRA-24 24˝ 610 3 1.4

Legs and Crossbrace Assemblies• Stainless steel welded construction.

model # description300720 11⁄2˝ or 2˝ (38 or 51mm) NPS connection300721 2˝ (51mm) NPS connection

Lever Drains

model # description313832 brass, for 1⁄2˝ pipe size

Anti-Siphon Breaker

outer width x length x height * weightmodel # in. mm lbs. kgDVS-48 4˝ x 16˝ x 48˝ 102 x 406 x 1219 60 27.2DVS-60 4˝ x 16˝ x 60˝ 102 x 406 x 1524 75 34.0DVS-72 4˝ x 16˝ x 72˝ 102 x 406 x 1829 90 40.8

* Outer dimensions exclude 2˝ flange. For other size requirements, please call the factory.

overall width x length x height* sh. weightmodel # in. mm lbs. kgHDC3636 36˝ x 36˝ x 20˝ 914 x 914 x 508 150 68.0HDC3642 36˝ x 42˝ x 20˝ 914 x 1067 x 508 155 70.3HDC3648 36˝ x 48˝ x 20˝ 914 x 1219 x 508 175 79.4HDC4242 42˝ x 42˝ x 20˝ 1067 x 1067 x 508 194 88.0HDC4848 48˝ x 48˝ x 20˝ 1219 x 1219 x 508 206 93.4HDC4860 48˝ x 60˝ x 20˝ 1219 x 1524 x 508 226 102.5

* For other size requirements, please call the factory.

Dishwasher Condensate Vents, DVS Series

• Mounts to dishwasher end vents. • Seams are continuously liquid-tight. • 18 gauge type 304 stainless steel.

NFPA-96Dishwasher Condensate and Type II Hoods, HDC Series ( )for TYPE II

• 12˝ x 12˝ (305 x 305mm)collar opening for exhaustconnection.

• Type 304 stainless steelconstruction.

• Full perimeter gutter withdrain tube located on the left.

For Type II applications, optional baffles are available. To order, add suffix “S”to model number (example: HDC3636S).

Dishtable Accessories




EG20.50 Rev. 04/10


SheetNo.

EG20.50

SinkM

odifications




S.I.S. No.:

Sink ModificationsSpecification Sheet


E30E37E37AE38-6E38-12

MODELS:E39E40E41E41AE43

E44E45E46E47

E48E48AE49E49A

E50E51E52E53

E54E55E56E101A


* Applicable to wall mount shelves and pot racks.



included in illustration above:model # descriptionE30 End splash - per end, all heightsE40 Provision for sink heaterE41 Disposal provision package—collarE41A Disposal provision package—coneE43 Stand pipe with corner guard, available only on FN-style and

utility sinksE44 Faucet hole revision (adding or moving)E45 Trough installed in drainboard - up to 30˝ (762mm) longE46 Rubber scrap block installedE101A Turn down backsplash (per table), includes Z-clips

model # descriptionE37 NSF sprayed-on latex sound deadening - up to 12´ (3658mm)E37A - for each additional footE38-6 * Cantilever mount up to 6´ (1829mm)E38-12 * Cantilever mount up to 12´ (3658mm)E39 Enclosed backsplash

E47Sink cover holders, sized for stainless steel or poly(includes upper and lower track)

E48 Stainless steel apron, to cover sink bowls - 2 or 3 compartmentE48A - for each additional compartment over 3E49 s/s undershelf under drainboards - up to 24˝ (610mm) w/short legsE49A - for each additional foot over 24˝ (610mm)E50 Provision for water pumpE51 Optional size drainboardE52 High backsplash up to 13˝ (330mm)E53 High backsplash up to 18˝ (457mm)E54 Working height revision

model # descriptionE55 Drainboard corner turnE56 overflow hole

Refer to chartbelow fordescription ofE# models.



InSinkErator Model: SS-100-7-MRS Item #13


ITEM# 13 - DISPOSER (1 REQ'D)

InSinkErator SS-100-7-MRS

SS-100™ Complete Disposer Package, sink mount system, 6-5/8" diameter inlet, with #7 collar adaptorfor sink installation, 1 HP motor, stainless steel construction, includes syphon breaker, solenoid valve,flow control valve, removable splash baffle, stainless steel sink stopper, manual reverse switch

Mfr Qty Model Spec

ACCESSORIES

1 yr. parts & labor warranty from date ofinstallation (std)

1InSinkErator

208v/60/1-ph, 5.1 amps1InSinkErator

APPROVED ALTERNATES: RED GOAT,SALVAJOR

KEC TO HAVE COLLAR SHIPPED TOFABRICATOR OF SOILED DISHTABLE (ITEM 12)FOR FACTORY INSTALLATION


ELECTRICAL

PHASE AFF

5.1 1208 60 Direct11

DIRECTSIZE

COLDSIZE

INDIRECTSIZE

HOTSIZE

HOTGPH

CONDENSERINLET SIZE

FILTEREDSIZE


WATER WASTE

HOTAFF

COLDAFF

FILTEREDAFF

1-1/2"1/2"1 1


PROJECT: ITEM NO.:

Heavy-duty disposer designed for continuous operation in restaurants, hotels, hospitals and cafeterias. Food waste including steak bones is quickly and efficiently removed with this labor-saving, self-cleaning, environmentally sound disposer.

CC-202 Control Center(Auto-Reversing)

CC-101 Control Center(Auto-Reversing)

AS-101 Control Center AquaSaver® (Auto-Reversing)

A complete collection of our product drawings is available for download at the InSinkErator Revit/CAD Library, which can be found at www.insinkerator.com/foodservice. Product information is also accessible on The KCL CADalog. More information is available from KCL at www.kclcad.com.

Manual Switch(Single Direction)

Manual Reverse Switch(Dual Direction)

1/2 – 1-1/4 H.P. DISPOSER MODELS

MODEL & HORSEPOWER/ELECTRICAL REQUIREMENTS

115/208-230V, 60 Hz, 1 Ph, 8.4/4.0/4.2 amps, UL 208-230/460V, 60 Hz, 3 Ph, 2.0/2.2/1.1 amps, ULSS-501/2 H.P.

115/208-230V, 60 Hz, 1 Ph, 10.0/4.2/5.0 amps, UL208-230/460V, 60 Hz, 3 Ph, 2.5/3.0/1.5 amps, UL115/230V, 50 Hz, 1 Ph, 7.7/3.7 amps

230/460V, 50 Hz, 3 Ph, 2.7/1.4 amps380V, 50 Hz, 3 Ph, 1.1 amps

SS-753/4 H.P.

InSinkErator ©2012 Printed in USA Form No. F307-12L-45-02InSinkErator is a business unit of Emerson Electric Co.

4700 21st STREETRACINE, WI 53406TEL: 800-845-8345FAX: 262 554-3620www.insinkerator.com/foodservice

ELECTRICAL CONTROLS

SPECIFICATIONS

• Grind Chamber: Corrosion Resistant Stainless Steel

• Mounting: 3/4" (19.1 mm) rubber mounting above grinding chamber isolates sound and eliminates vibration. Mounting is enclosed in chrome plated covers for sanitation and appearance.

• Motor: 1/2 – 1-1/4 HP Induction Motor, 1725 RPM, totally enclosed to provide protection against outside moisture. Controlled power air flow cools motor for efficiency and longer life. Built-in thermal overload protection.

• Cutting Elements: Stationary and rotating shredding elements made from cast nickel chrome alloy for long life and corrosion resistance, designed for reverse action grinding.

• Main Bearings: Double-tapered Timken roller bearings provide a shock absorbing cushion.

• Motor Seals: Triple lip seal protects motor from water damage. Secondary spring-loaded oil seal provides double protection against water and loss of grease.

• Finish: All Stainless Steel and Chrome plated. Paint-free for lasting sanitation.

• Warranty: 1 year full warranty from date of installation.

• A Disposer Package Includes: 1 Mounting/Bowl Assembly, 1 Electrical Control, 1 Syphon Breaker, 1 Solenoid Valve, and 1 Flow Control Valve. The standard Flow Control Valve will be sent with the unit unless the optional valve is specified.

115/208-230V, 60 Hz, 1 Ph, 11.6/5.1/5.7 amps, UL208-230/460V, 60 Hz, 3 Ph, 2.2/3.0/1.5 amps, UL

120/208-240V, 60 Hz, 1 Ph, 11.6/5.1/5.7 amps, NOM100/200-230V, 50/60 Hz, 1 Ph, 10.4/5.2/5.4 amps

SS-1001 H.P.

115/208-230V, 60 Hz, 1 Ph, 12.8/5.9/6.6 amps, UL 208-230/460V, 60 Hz, 3 Ph, 2.6/3.3/1.9 amps, ULSS-1251-1/4 H.P.

NOTE: All amp ratings denote amp draw during a grind load.

The Emerson logo is a trademark and a service mark

of Emerson Electric Co.

InSinkErator SS-100-7-MRS Item#:13


DIMENSIONS

IMPORTANT: Use dimension chart below for adaptor height in place of InSinkErator bowl sink height when mounting directly to a sink.

Bowl Sinks

Flange O.D. X

Work Table Hole Y

Flange I.D. Z

Height

12" (304.8 mm)

13-1/2" (342.9 mm)

12-1/4" (311.2 mm)

12" (304.8 mm)

6-1/2" (165.1 mm)

15" (381 mm)

16-1/2" (419.1 mm)

15-1/4" (387.4 mm)

15" (381.0 mm)

6-1/2" (165.1 mm)

18" (457.2 mm)

19-1/2" (495.3 mm)

18-1/4" (463.6 mm)

18" (457.2 mm)

6-1/2" (165.1 mm)

Adaptors X Y Z Height

No. 5 Fits Standard Sink Opening: 3-1/2" – 4" (88.9 mm – 101.6 mm)

2-3/4"(69.9 mm)

No. 6 7-13/16" (198.4 mm)

6-7/8" (174.6 mm)

6-5/8" (168.3 mm)

1-3/16" (30.2 mm)

No. 7 9-1/8" (231.8 mm)

7-7/8" (200.0 mm)

7-5/8" (193.7 mm)

2-1/16" (52.4 mm)

Z

Y

6-5/8"(168.3 mm)

X

6-13/16"(173.0 mm)

4-7/8"(123.8 mm)

6-3/8"(161.9 mm)

1-1/2"(38.1 mm)

3-3/8"(85.7 mm)

6-1/2"(165.1 mm)

7-11/16"(195.3 mm)

17"(431.8 mm)

EXTERNAL ELECTRICALCONNECTIONS

1/2-14 N.P.T.WATER INLET

InSinkEratorBOWL SINK

NOTE: • Adaptors are available upon request for all competitor sink bowls or cones.• Please have sink bowl/cone type with the necessary dimensions when ordering adaptors.

RECOMMENDED INSTALLATION

DISPOSER MOUNTING ASSEMBLIES (choose one)

Collar Mounts

#6 Collar Adaptor for welding into trough, provides 6-5/8" (168.3 mm) opening, includes splash baffle

#7 Collar Adaptor for welding into sink, provides 6-5/8" (168.3 mm) opening, includes splash baffle and stopper

#5 Sink Flange Mounting Assemblies for 3-1/2" – 4" (88.9 mm – 101.6 mm) sink opening (support legs are recommended)

Bowl Mounts

Type A Sink Bowl Assembly: Includes bowl, water nozzle(s), bowl cover, splash baffle

Type B Sink Bowl Assembly: Includes bowl, water nozzle(s), silver guard, splash baffle

Type C Sink Bowl Assembly: Includes bowl, water nozzle(s), splash baffle

Sink Bowl Assembly Size12" (304.8 mm) with one adjustable water nozzle15" (381.0 mm) with one adjustable water nozzle18" (457.2 mm) with two adjustable water nozzles

Standard Optional

SS-50 3 GPM(11.4 LPM)

N/A

SS-75 3 GPM(11.4 LPM)

N/A

SS-100 5 GPM(18.9 LPM)

3 GPM(11.4 LPM)

SS-125 5 GPM(18.9 LPM)

3 GPM(11.4 LPM)

For additional information, see Foodservice Product Information Binder.

RECOMMENDED WATER USAGE

InSinkErator SS-100-7-MRS Item#:13


T&S Brass Model: MPY-8WLN-08 Item #14


ITEM# 14 - MINI PRERINSE UNIT (1 REQ'D)

T&S Brass MPY-8WLN-08

Mini pre-rinse Unit, 8" wall mount base faucet, compact spring & flex hose, low flow spray valve, 6"wall bracket, lever handles, 8" add on faucet

DIRECTSIZE

COLDSIZE

INDIRECTSIZE

HOTSIZE

HOTGPH

CONDENSERINLET SIZE

FILTEREDSIZE


WATER WASTE

HOTAFF

COLDAFF

FILTEREDAFF

1/2"1/2"1 1


[203mm][88mm]3 7/16"

8"

12 11/16"

RegulatorB-PT Stream

& Spray Valve Not ShownOverhead Spring, Hose

Lever HandlesSpring Checks &Eterna Cartridges w/

For Clarity

Surface

060X8" Swing Nozzle w/

Mounting

EPAct2005 CompliantFor Commercial Use Only

8" c/cAdjustable From7 3/4" to 8 1/4"

[197mm] - [210mm] Hose w/ PolyurethaneInner Hose & Handle

24" Stainless SteelB-0024-H Swing Nozzle

Not Shown ForClarity

1/4 Turn Eterna

Bracket

B-0155-LNEZ

Cartridge & Lever Handle

6" Wall B-0109-01

B-0107-C

Female Inlets)

Spray Valve w/ 1.24 GPM Flow Rate 000364-40

3/8" NPTx 8" Riser

004RFingerHook

2"[51mm]Flanges(1/2" NPT

[552mm]21 3/4"

[78mm]3 1/16" 8 7/8"

[226mm]

1 of

Product Specifications:

Scale:

Model No.

Item No.

T&S BRASS AND BRONZE WORKS, INC.Travelers Rest, SC 29690

REG. #A2601ISO #9001

07/01/08

DHL

MPY-8WLN-08

Sheet:

Travelers Rest, SC: 800-476-4103 Simi Valley, CA: 800-423-0150

NTSSpray Valve, 6" Wall Bracket & Lever Handles

2 Saddleback Cove / P.O. Box 1088

Fax: 864-834-3518 www.tsbrass.com

JHBJRMApprovedDrawn Checked

Date:8" Swing Nozzle, Compact Spring & Flex Hose, B-0107-C8" Wall Mount Mixing Faucet, Add-On Faucet w/

Easy Install Pre-Rinse Unit:

This Space for Architect/Engineer Approval

Job Name__________________________Date_________

Model Specified_____________________ Quantity______

Customer/Wholesaler______________________________

Contractor_______________________________________

Architect/Engineer_________________________________

2

T&S Brass MPY-8WLN-08 Item#:14


9

10

11

18

14

20

1

23

15

21

2

3

4

5

7

2

8

13

19

1617

12

6

22

2524

26

ITEM NO. SALES NO. DESCRIPTION

1 B-0107-C 1.24 GPM Spray Valve2 010476-45 #27 Washer3 000907-45 Hold Down Ring4 002987-40 Grip Handle Assembly5 010475-45 Washer, B-0100 Hose Barrel6 B-0024-H2A 24" Flex Hose Less Handle7 016795-45 Compact Pre-Rinse Spring8 000821-40 Spring Body9 B-0109-01 Bracket Assembly, 6" Wall10 004R Finger Hook11 000364-40 3/8" x 8" Riser12 001019-45 Coupling Nut Washer13 00AA 00AA Flange Assembly

14 012442-40 Cold Eterna Spindle Assembly w/ Spring Check

15 001638-45 Lever handle16 001660-45 Cold, Index Button17 000922-45 Screw, Lever

18 012443-40 Hot Eterna Spindle Assembly w/ Spring Check

19 001661-45 Hot, Index Button

20 007947-40 Quarter Turn Spindle Assembly

21 B-PT Stream Regulator Outlet22 001048-45 Nozzle Tip Washer23 060X 060X Swing Nozzle Asm

24 002711-40 Cold Eterna Spindle Asm w/ SC, Handle, Screw & Index

25 002712-40 Hot Eterna Spindle Asm w/ SC, Handle, Screw & Index

26 B-0155-LNEZ Add-On 1/4 Turn Faucet

2Sheet:

Model No.

Item No.


Travelers Rest, SC: 800-476-4103 Fax: 864-834-3518

REG. #A2601ISO #9001

MPY-8WLN-08

Simi Valley, CA: 800-423-0150


ApprovedDrawn Checked

NTSof 2

www.tsbrass.com

Date:

Spray Valve, 6" Wall Bracket & Lever Handles

DHL

07/01/08Scale:


JRM JHBEasy Install Pre-Rinse Unit:8" Wall Mount Mixing Faucet, Add-On Faucet w/8" Swing Nozzle, Compact Spring & Flex Hose, B-0107-C

T&S Brass MPY-8WLN-08 Item#:14


Rubbermaid Model: FG354100LGRAY Item #15


ITEM# 15 - GARBAGE CAN / NIKEC (5 REQ'D)

Rubbermaid FG354100LGRAY

Slim Jim® Waste Container, 15-7/8 gallon (60 liter) n, general purpose waste, open type without lid,high-impact plastic construction, light gray

<By Owner>

Mfr Qty Model Spec

ACCESSORIES

Waste Basket, 14 qt., 11-1/8"L x 8-1/4"W x 12-1/4"H, fire resistant, rounded corners, texturedfinish, fiberglass, CSFM & UL approved, gray<By Owner>

FG254100GRAY1Rubbermaid


www.rubbermaidcommercial.com

121UTIlITY REFUSE:� indoor Utility containers

slim jim® with Venting channelsnew slim Jim® with Venting Channels features ourinnovative system that increases efficiency and improve worker well-being. n Integrated, venting channels take the strain

out of liner removaln Space-saving profile fits virtually anywheren Four can liner cinches improve productivityn Molded-in handles and base grips make lifting and emptying easier

inTegRaTed VenTing channelsVenting channels dramatically reduce the force required to remove a full can liner up to 60%* when compared to traditional Slim Jim® containers.

No. Color DescriptionU.S.Dimensions

U.S.Capacity

U.S.Ship Wt/Ctn

MetricDimensions

MetricCapacity

MetricShip Wt/Ctn Can Liners Pack

FG354060** gRay, Bla, Beig Slim Jim® with Venting Channels 22” l x 11” w x 30” h 23 gal 30.6 lb 55.9 cm x 27.9 cm x 76.2 cm 87.1 L 13.9 kg 5009-88A 4FG354007 gRn, BlUe Slim Jim® with Venting

Channels - Recycling22” l x 11” w x 30” h 23 gal 30.6 lb 55.9 cm x 27.9 cm x 76.2 cm 87.1 L 13.9 kg 5009-88A 4

** Custom imprinting available; contact Rubbermaid Customer Service at (800) 347-9800 for details. A Not for sale in California.* Based on internal testing.

slim jim® containersthe industry standard in space-saving waste management.n Efficient size and shape designed to fit in tight spacesn Durable, all-plastic construction is easy to cleann Handled versions make lifting and carrying easiern Bottom hand-holds provide a secure grip during emptying

No. Color DescriptionU.S.Dimensions

U.S.Capacity

U.S.Ship Wt/Ctn

MetricDimensions

MetricCapacity

MetricShip Wt/Ctn Can Liners Pack

FG354000* yel, gRay, BRn, BlUe, Bla, Beig

Slim Jim® Waste Container 20” l x 11” w x 30” h 23 gal 32.9 lb 50.8 cm x 27.9 cm x 76.2 cm 87.1 L 14.9 kg 5009-88A 4

FG354075 BlUe Slim Jim® Recycling Container 20” l x 11” w x 30” h 23 gal 30.2 lb 50.8 cm x 27.9 cm x 76.2 cm 87.1 L 13.7 kg 5009-88A 4FG354100 lgRay, dBlUe,

BeigSlim Jim® Waste Container with Handles 23.13” l x 11” w x 24.88” h 157⁄8 gal 34.6 lb 58.8 cm x 27.9 cm x 63.2 cm 60 L 15.7 kg 5009-88A 4

FG354173 BlUe Slim Jim® Recycling Container with Handles

23.12” l x 11” w x 24.88” h 157⁄8 gal 34.6 lb 58.7 cm x 27.9 cm x 63.2 cm 60 L 15.7 kg 5009-88A 4

* Custom imprinting available; contact Rubbermaid Customer Service at (800) 347-9800 for details. A Not for sale in California.

FG354007See page 125 for recycling labels.

FG354060 can lineR cinchesFour pull-through holes and can liner cinches eliminate knot tying.

ACCESSoriES& Lids

pg. 122

FG354060 shown with optional FG355300 Stainless Steel Dolly (see page 122).

www.rubbermaidslimjim.com

See it inACtion

Slim Jim® ComboFG354220See page 122 for ordering information.

ACCESSoriESpg. 122

FG354000 Available in multiple colors to simplify waste separation.

FG354173For more Slim Jim® Recycling Containers, see page 192. FG354173 with FG270388 lid

over

60% easier*

Rubbermaid FG354100LGRAY Item#:15


Eagle Group Model: HSAN-10-F-LRS Item #16


ITEM# 16 - HAND SINK (1 REQ'D)

Eagle Group HSAN-10-F-LRS

Hand Sink, wall model, 18" x 12" x 14-1/4", 18/304 stainless steel construction, includes splashmounted faucet, left & right end splashes, basket drain, deep-drawn seamless design-positive drain,NSF

Mfr Qty Model Spec

ACCESSORIES

Paper Towel Dispenser, wall mounted, foldedtowel dispenser, 304 stainless steelconstruction, NSF

3184961Eagle Group

Deck mounted soap dispenser, 16 oz., NSF3240741Eagle Group


DIRECTSIZE

COLDSIZE

INDIRECTSIZE

HOTSIZE

HOTGPH

CONDENSERINLET SIZE

FILTEREDSIZE


WATER WASTE

HOTAFF

COLDAFF

FILTEREDAFF

1-1/2"1/2"1/2"1 1



EG20.56 Rev. 02/12


EG20.56

Hand Sinks w

ith Side Splashes




S.I.S. No.:

Hand Sinks with Side SplashesSpecification Sheet



MODELS:

HSA-10-F-LRSHSAN-10-F-LRSHSA-10-FTWS-LRSHSA-10-FDPE-LRS


Hand Sinks• Heavy gauge type 304 stainless steel all-welded

construction. • Inverted “V” edge rim retards spillage.• Unique deep-drawn positive-drain bowl assures

complete drainage to meet the most stringent health code requirements.

• Water inlet: 1⁄2˝ (13mm) NPT. • Drain outlet: 11⁄2˝ (38mm) NPS.

Side Splashes• Side splashes are factory-installed on both sides of sink. • 16 gauge type 304 stainless steel. • Tapered and rounded for safety.

bowl size overall sizewidth x length x depth width x length x height weight

model # includes in. mm in. mm lbs. kg

HSA-10-F-LRS faucet, basket drain 93⁄4˝ x 131⁄2˝ x 63⁄4˝ 248 x 343 x 173 143⁄4˝ x 187⁄8˝ x 123⁄4˝ 376 x 480 x 324 14 6.4and side splashes

HSAN-10-F-LRS 12˝ side-to-side, faucet, 131⁄2˝ x 93⁄4˝ x 63⁄4˝ 343 x 248 x 173 18˝ x 12˝ x 141⁄4˝ 457 x 305 x 362 13 5.9basket drain, side splashesfaucet, p-trap, tubular wall

HSA-10-FTWS-LRS brackets, basket drain, 93⁄4˝ x 131⁄2˝ x 63⁄4˝ 248 x 343 x 173 143⁄4˝ x 187⁄8˝ x 123⁄4˝ 376 x 480 x 324 21 9.5side splasheselectronic-eye faucet,

HSA-10-FDPE-LRS towel/soap dispenser, 93⁄4˝ x 131⁄2˝ x 63⁄4˝ 248 x 343 x 173 143⁄4˝ x 191⁄4˝ x 281⁄4˝ 376 x 489 x 718 31 14.1basket drain, side splashes

HSAN-10-F-LRS

HSA-10-FDPE-LRSHSA-10-FTWS-LRS

Short Form SpecificationsEagle Hand Sinks with Side Splashes, model ____________.Constructed of all-welded type 304 stainless steel, with deep-drawn positive drain sink bowl, inverted “V” edge to preventspillage, drain, splash-mounted faucet, and factory-installedside splash on both sides. Offered are the following hand sinks: • Model #HSA-10-F-LRS. • Model #HSAN-10-F-LRS. 12˝ side-to-side. • Model #HSA-10-FDPE-LRS. Includes paper towel dispenser,

soap dispenser, and electronic-eye sensor-beam faucet with12-volt adaptor – 120/60/1.

• Model #HSA-10-FTWS-LRS. Includes tubular wall support.

HSA-10-F-LRS

Eagle Group HSAN-10-F-LRS Item#:16



EG20.52B Rev. 04/12


EG20.52B

Hand Sink Accessories &

Options—

Miscellaneous




S.I.S. No.:

Hand Sink Accessories & Options—Miscellaneous

Specification Sheet



TOWEL/SOAP DISPENSERSmodel # descriptionDP-10* towel dispenser with conventional soap dispenserDP-20* towel dispenser with electric-eye soap dispenser318496 towel dispenser, type 304 stainless steel 352854 touchless, break-resistant plastic, wall mounted

model # description300791 tail piece300789 p-trap

PLUMBING COMPONENTS

add suffix # for models:

-T * HSA-10; HSA-10-F; HSA-10-FA; HSA-10-FDP; HSA-10-FE;HSA-10-FDPE; HSA-10-FDPEE; and HSA-10-FW

WASTE RECEPTACLE20 gauge stainless steel. Removable. Comes with skirt. Must befactory installed.

* Example: HSA-10-FDP-T

model #DP-10 towel dispenser

model #318496 towel dispenser

conventional soap dispenser

polymer rotary drain

p-trap

tailpiece

soap dispenserwith electric eye

*Fits all HSA hand sinks except Space Saver models

SOAP DISPENSERSmodel # description300602 soap dispenser, conventional 359752 soap dispenser, wall mounted with electric-eye 324074 soap dispenser, deck mounted, 16-oz.

HAND SANITIZING DISPENSERmodel # description352852 Purell/TXF, wall mounted

DRAINS MAXIMUM FLOW RATEgallons gallons

model # description per minute per hour

319931 polymer rotary drain fits 11 6603.5˝ (89mm)-diameter hole

319932 overflow assembly for - -#319931 drain (above)300886 1.5˝ (38mm) drain assembly,

12 720fits 2˝ (51mm)-diameter hole

300966 mini crumb cup for - -1.5˝ (38mm) drain300287 crumb cup stainer assembly 18 1080

cast metal lever drain with

347771 overflow assembly, with 7.25˝ - -(185mm)-long lever, fits3.5˝ (89mm)-diameter hole

wastereceptacle

handsanitizingdispenser





Cata

log

Spec

ifica

tion

Shee

t No.

Han

d Si

nk A

cces

sori

es &

Opt

ions

—M

isce

llane

ous


S.I.S. No.:

Rev. 04/12




EG20

.52B

SKIRT ASSEMBLIESmodel # fits models

606215 HSA-10; HSA-10-F; HSA-10-FA; HSA-10-FDP; HSA-10-FE; HSA-10-FDPE; HSA-10-FDPEE; and HSA-10-FW

607560 HSAN-10-F

model # description

HSA-SSK one self-adhesive side splash, can beused for right or left application

hand sink with hot water heater

FACTORY-INSTALLED

FOR FIELD INSTALLATION

add suffix # description-LS * left end splash only-RS * right end splash only-LRS * left and right end splash

END SPLASHESType 304 stainless steel. Note: Will not work with Space Saver HandSinks that have faucets with wrist handles. Note: MICROGARD® cannot be put on hand sinks with end splashes.

* Example: HSA-10-F-LRS

* Example: HSA-10-F-NB

WALL BRACKETSmodel # description606396 side mounting, one pair, does not fit Space Saver models

add suffix # * description

-NB * Infectious-control nail brush made of FDO-approvedmaterial, with stainless steel splash mount holder

wallbracket

skirt assembly

hand sink withelectropolished finish

nail brush

nail brushholder

hand sink with optional end splashes

pair of end splashes for field installation

NAIL BRUSH AND NAIL BRUSH HOLDER

* Example: HSA-10-F-EP

add suffix # * description

-EP * Increases corrosion resistance, deburring, reduces productadhesion. Easier cleaning, Attractive appearance.

ELECTROPOLISHED FINISHFor material handling applications.

withTANKLESS

WATERHEATER

HOT WATER HEATERFor Eagle hand sinks with 10˝ x 14˝ x 6˝ (254 x 356 x 152mm) roundedsink bowl. Energy-efficient self-contained tankless hot water heater byEemax™. 120V, 29A. 0.5 gallons per minute, with 48° temperature rise.Maximum 150 PSI operating pressure (25 PSI min.). Flow switch activatesheater only on demand—no stand-by heat loss. 3/8˝ compressionfittings. Includes type 304 stainless steel pedestal base, which featuresnotch for water heater electrical wiring and front access panel. No T&Prelief valve needed (check local codes), reducing installation cost.Note: Field wiring required.

*Example: HSA-10-FDPEE-WH

add suffix # applicable modelsHSA-10; HSA-10-F; HSA-10-FA; HSA-10-FDP; HSA-10-FE;

-WH * HSA-10-FDPE; HSA-10-FDPEE; HSA-10-FW; HSA-10-FA-Pand HSAD-10-F



Eagle Group Model: SPTD Item #17


ITEM# 17 - SOAP & PAPER TOWEL DISPENSER (1 REQ'D)

Eagle Group SPTD

Soap & paper towel dispenser, included in and part of Hand Sink (Item 16)


Eagle Group Model: WSP1260 Item #18


ITEM# 18 - OVERSHELF (1 REQ'D)

Eagle Group WSP1260

Wall Shelf with Removable Hooks, 12" x 60" 16 gauge type 430 stainless steel, 1 1/2" roll on front, 11/2" upturn on rear and ends, 2" x 3/16" flat bar, furnished with double-prong stainless steel hooks,one every 12", NSF

Mfr Qty Model Spec

ACCESSORIES

Wall Shelf with Removable Hooks, 12" x 48" 16gauge type 430 stainless steel, 1 1/2" roll onfront, 1 1/2" upturn on rear and ends, 2" x3/16" flat bar, furnished with double-prongstainless steel hooks, one every 12", NSF

WSP12481Eagle Group


WALL MOUNT AT 72" AFF



EG02.06 Rev. 11/08


SheetNo.

EG02.06

WallShelves

with

Rem

ovableH

ooks




S.I.S. No.:

Specification Sheet




Wall Shelves withRemovable Hooks

MODELS:

Options / AccessoriesAdditional hooks

Short Form SpecificationsEagle Wall Shelf with Removable Hooks, model_____________. Shelf is constructed of 16 gauge type 304stainless steel, with 11⁄2˝ roll on front and 11⁄2˝ upturn on rearand ends. 2˝ x 3⁄16˝ type 304 stainless steel flat bar. Furnished withdouble-prong stainless steel removable hooks, one every 12˝. WSP1072

WSP1084WSP1096WSP10108WSP10120WSP10132WSP10144WSP1236WSP1248WSP1260WSP1272WSP1284WSP1296

WSP1036WSP1048WSP1060WSP1072WSP1084WSP1096WSP10108WSP10120WSP10132WSP10144WSP1036WSP1048WSP1060

WSP12108WSP12120WSP12132WSP12144WSP1536WSP1548WSP1560WSP1572WSP1584WSP1596WSP15108WSP15120WSP15132WSP15144

wall shelf with rack

Design and Construction Features• Shelf: 16 gauge type 430 stainless steel.• 11⁄2˝ (38mm) roll on front.• 11⁄2˝ (38mm) upturn on rear and ends.• Flat bar: 2˝ x 3⁄16˝ (51 x 5mm) type 304 stainless steel.• Double-pronged, stainless steel removable hooks—

one every 12˝ (305mm).

Eagle Group WSP1260 Item#:18




Cata

log

Spec

ifica

tion

Shee

tNo.

EG02

.06

Wal

lShe

lves

with

Rem

ovab

leH

ooks


S.I.S. No.:

Rev. 11/08




Wall Shelves with Removable Hooks

weight weight weight weight lengthmodel # lbs. kg model # lbs. kg model # lbs. kg model # lbs. kg in. mmWSP1036 12 5.4 WSP1236 15 6.8 WSP1536 21 9.5 WSP1836 27 12.2 36˝ 914WSP1048 23 10.4 WSP1248 29 13.2 WSP1548 35 15.9 WSP1848 41 18.6 48˝ 1219WSP1060 37 16.8 WSP1260 43 19.5 WSP1560 49 22.2 WSP1860 55 24.9 60˝ 1524WSP1072 51 23.1 WSP1272 57 25.9 WSP1572 63 28.6 WSP1872 69 31.3 72˝ 1829WSP1084 65 29.5 WSP1284 71 32.2 WSP1584 77 34.9 WSP1884 83 37.6 84˝ 2134WSP1096 79 35.8 WSP1296 85 38.6 WSP1596 91 41.3 WSP1896 97 44.0 96˝ 2438WSP10108 93 42.2 WSP12108 99 44.9 WSP15108 105 47.6 WSP18108 111 50.3 108˝ 2743WSP10120 107 48.5 WSP12120 113 51.3 WSP15120 119 54.0 WSP18120 125 56.7 120˝ 3048WSP10132 121 54.9 WSP12132 127 57.6 WSP15132 133 60.3 WSP18132 139 63.1 132˝ 3353WSP10144 135 61.2 WSP12144 141 64.0 WSP15144 147 66.7 WSP18144 153 69.4 144˝ 3658

10˝ (254mm) WIDE 12˝ (305mm) WIDE 15˝ (381mm) WIDE 18˝ (457mm) WIDE

FRONT VIEW

(note: pot hooks not shown)

TOP VIEW

SIDE VIEW

Eagle Group WSP1260 Item#:18


Eagle Group Model: C314-16-3-18 Item #19


ITEM# 19 - THREE (3) COMPARTMENT SINK (1 REQ'D)

Eagle Group C314-16-3-18

Corner Sink, Three Compartment, with 18" left & right drainboards, 16" x 19" x 14" deep bowls, 8"Hsplash, galvanized open frame base with side crossrails, 16/304 stainless steel, NSF

Mfr Qty Model Spec

ACCESSORIES

End splash, per end, all heights (LEFT END)E301Eagle Group

Sink Mixing Faucet, 12" swing nozzle, wallmounted, 8" centers on sink faucet with 1/2"IPS EE male inlets with adjustable flange, leverhandles

B-0231-EE2T&S Brass

Twist Waste Valve, 3-1/2" sink opening, 2"drain outlet with 1-1/2" adapter (replaces B-3912, B-3916)

B-39503T&S Brass

APPROVED ALTERNATES: ADVANCE, SELECTSTAINLESS (SINK)APPROVED ALTERNATE: FISHER (FAUCET,LEVER WASTE)

DIRECTSIZE

COLDSIZE

INDIRECTSIZE

HOTSIZE

HOTGPH

CONDENSERINLET SIZE

FILTEREDSIZE


WATER WASTE

HOTAFF

COLDAFF

FILTEREDAFF

(3) 2"(2)1/2"

(2)1/2"

1 1



EG20.09 Rev. 09/12


EG20.09

314 Series Corner Sinks



Short Form SpecificationsEagle 314 Series Corner Sink, model _______________.Heavy gauge type 304 stainless steel sink bowls, drainboards,and backsplash. Sink bowls are deep-drawn with a minimum15⁄8˝ radius. Poly cutting board furnished. Faucet holes arepunched on 8˝ centers. Unit furnished with 11⁄2˝ IPS basket-typedrains. 15⁄8˝ O.D. galvanized tubular legs and crossbracing withadjustable bullet feet.


Item No.:Project No.:S.I.S. No.:

314 Series Corner SinksSpecification Sheet

MODELS:



corner sink

C314-10-3-12C314-16-3-18

C314-22-3-18C314-24-3-24

Top• Features 11⁄2˝ (38mm) rolled rim on front and sides. • Drainboards, backsplash and edges are 16 gauge type 304stainless steel.

• Drainboards are integrally welded. • 11⁄8˝ (29mm) faucet holes punched on 8˝ (203mm) centers.

Base• Legs: 15⁄8˝ (41mm)-diameter heavy-gauge galva nized tubingwith plated 12-gauge gussets and high-impact corrosionresistant fully-adjustable bullet feet.

• Crossbracing: 1˝ (25mm)-diameter heavy-gauge galvanizedtubing, running front-to-back.

• Leg locations are adjacent to sink bowls, providingincreased stability and maximum weight support.

• Leg gussets are welded to a die-cut heavy-gauge re in forc ing plate.

Bowls• Heavy gauge type 304 stainless steel. • Deep-drawn one-piece seamless con struc tion using state-of-the-art hydraulic press es.

• All sink bowls have a generous radius and are rectangularfor maximum ca pac i ty.

• Basket-type waste drains are 11⁄2˝ (38mm) IPS and included.• 31⁄2˝ (89mm) opening provided in sink bowl.

Design and Construction Features• Unit comes standard with poly cutting board/sink cover. • Entire assembly is fuse welded and planished, pro vid ing aone-piece seamless sink unit.

• Welded areas are high-speed belt blended to match ad ja centsurfaces with continuity of satin finish.

• All outside corners of sink assembly are bullnosed toprovide safe, clean edges.

Options / AccessoriesFaucetsExtra sink coversWaste outletPrerinse unitAdd-on faucetStainless steel gussets

Stainless steel legsStainless steel bullet feetLever drainsTwist handle drainsTwist drain brackets

Eagle Group C314-16-3-18 Item#:19




Bowl DImEnsIonsovErAllDImEnsIons

Cata

log

Spec

ifica

tion

Shee

t No.

EG20

.09

314

Seri

es C

orne

r Si

nks

Item No.:Project No.:S.I.S. No.:

Rev. 09/12

Printed in U.S.A.©2012 by Eagle Group

314 Series Corner Sinks



TOP VIEW SIDE VIEW

drainwidth length depth drainboards front-to-back centers shipping

model # (A) (B) (C) (D) (E) (F) (G) (H) (I) weight

C314-10-3-1239˝ 43˝ 10˝ 14˝ 10˝ two 12˝ 21˝ 11˝ 9˝ 80 lbs.

(991mm) (1092mm) (254mm) (355mm) (241mm) (304mm) (533mm) (279mm) (229mm) (36.3 kg)

C314-16-3-18571⁄4˝ 593⁄4˝ 16˝ 19˝ 14˝ two 18˝ 26˝ 131⁄2˝ 121⁄8˝ 140 lbs.


C314-22-3-1869˝ 69˝ 22˝ 22˝ 14˝ two 18˝ 29˝ 15˝ 15˝ 175 lbs.


C314-24-3-2479˝ 79˝ 24˝ 24˝ 14˝ two 24˝ 31˝ 16˝ 16˝ 200 lbs.


Eagle Group C314-16-3-18 Item#:19



EG10.50 Rev. 04/12


EG10.50

Table Modifications




S.I.S. No.:


Specification Sheet


















Cata

log

Spec

ifica

tion

Shee

t No.

Tabl

e M

odifi

catio

nsItem No.:


Rev. 04/12




EG10

.50












model # description





121mm4 3/4"

12"305mm

7 1/2"191mm

Eterna Cartridges &Lever Handles w/ Color Coded Indexes

8"203mm

MountingSurface

Stream Regulator OutletB-PT

062X 12" Swing Nozzle w/

1/2" NPTMale Inlet

Note: Rough-In Requirement(2) Ø 1" [25mm] Mounting Holes

2 5/16"59mm

Sheet: 1 of


Scale:

Model No.

Item No.


REG. #A2601ISO #9001

02/17/11

JRM

Travelers Rest, SC: 800-476-4103

Double Pantry Faucet w/ Eterna Cartridges, 12" Swing Nozzle w/ B-PT Stream Regulator Outlet, Lever Handles & 1/2" Male Inlets

www.tsbrass.com

JHBDHLApprovedDrawn Checked

1:4

2 Saddleback Cove / P.O. Box 1088 B-0231-EE

Simi Valley, CA: 800-423-0150 Fax: 864-834-3518

Date:


Job Name__________________________Date_________



Contractor_______________________________________


2

T&S Brass B-0231-EE Item#:19


2Sheet:

Model No.

Item No.



REG. #A2601ISO #9001

B-0231-EE




of

Date:w/ B-PT Stream Regulator Outlet, Lever Handles & 1/2" Male InletsJRM

02/17/11Scale:


DHL JHB

www.tsbrass.com

2

Double Pantry Faucet w/ Eterna Cartridges, 12" Swing Nozzle

NTS

911 1012

14

1

2 416

15

13

6

7

3

5

8


1 B-PT Stream Regulator2 001048-45 Nozzle Tip Washer

3 062X 12" Swing Nozzle Assembly w/ B-PT Stream Regulator

4 009538-45 Swivel Washer5 011429-45 Swivel Sleeves (2)6 001074-45 O-Ring7 001660-45 Blue Index-CW8 002954-45 Shank Lock Nut9 000999-45 Brass Lock Washer10 00EE 1/2" NPT Male Inlet Assembly11 001019-45 Coupling Nut Washer 12 005959-40 Spindle Asm. Eterna "Cold"13 005960-40 Spindle Asm, Eterna "Hot"14 001638-45 Lever Handle15 001661-45 Red Index-HW16 000922-45 Lever Handle Screw

T&S Brass B-0231-EE Item#:19


5 3/4"[146mm]

12 1/4"±1/4"[312mm]

2 5/8"[68mm]

Twist Handle w/Heat ResistantPlastic Grip (Shownin Open Position)

Adapter Converts 2" NPTMale to 1 1/2" NPT Male. Remove Adapter When 2" NPT Male Thread is Needed.

4 7/16"[113mm]

Removable Snap-in Strainer

180°60°

HANDLE ORIENTATION

OPENED

CLOSED

LOCKED


Scale:

Model No.

Item No.


REG. #A2601ISO #9001

3/19/07

JRM

B-3950

Rotary Waste Valve w/ Twist Handle, 3 1/2" Sink Opening, 2" NPT Male Outlet & 1 1/2" NPT Male Adapter


Date:

1:4


Job Name__________________________Date_________



Contractor_______________________________________


CheckedDrawn ApprovedDHL JHB

www.tsbrass.comFax: 864-834-3518Simi Valley, CA: 800-423-0150Travelers Rest, SC: 800-476-4103

Sheet: 1 of 2

T&S Brass B-3950 Item#:19


6

5

4

7

9

1

Also Furnished w/ SealingCap When Overflow TubeCoupling Nut is Not Used.

PN# 012640-45

23

Washers, O-Rings & Gaskets are included in

Parts Kit B-39K

8

ITEM NO. SALES NO. DESCRIPTION1 010389-45 O-Ring, Plunger 2 010391-45 Nut, Coupling For Twist Drain3 010390-45 Ferrule, Coupling Nut4 010382-45 Gasket, 3 1/2" Face Flange 5 010384-45 Flange, 3 1/2" Face6 010386-45 Strainer, 3 1/2" Snap-in Removable7 010388-45 Plunger, Twist Drain 8 010393-45 Handle Asm, Rotary Waste Valve Twist9 B-3945 Adapter, 2" NPT x 1 1/2" NPT

Model No.

Item No.



REG. #A2601ISO #9001

B-3950




1:4Date:

Rotary Waste Valve w/ Twist Handle, 3 1/2" Sink Opening, 2" NPT Male Outlet & 1 1/2" NPT Male Adapter

JRM

3/19/07Scale:


DHL JHB

www.tsbrass.com

2of2Sheet:



Delfield Model: 6125XL-S Item #20


ITEM# 20 - FREEZER, REACH-IN, 1 SECTION / EXISTING/RELOCATE (1REQ'D)

Delfield 6125XL-S

Freezer, Reach-in, single-section, 20.0 cubic feet, top mounted self-contained refrigeration 404A, digitalthermometer, stainless steel front, aluminum ends, ABS interior, (3) epoxy coated wire shelves, solidhinged full height door, casters, cUL, NSF, 1/2 hp

<Existing>

Mfr Qty Model Spec

ACCESSORIES

115v/60/1, 9.0 amps, with cord & NEMA 5-15P,standard

1Delfield

(1) Year parts & labor warranty, standard (USA)1Delfield

5 Yr compressor warranty1Delfield

Door hinged on right standard1Delfield


ELECTRICAL

PHASE AFF

9 1/25-15P120 60 Cord & Plug11


MECHANICAL CONNECTIONS MUST BE VERIFIED


Project __________________________________

Item ____________________________________

Quantity ________________________________

CSI Section 11400

Approved _______________________________

Date ____________________________________

980 S. Isabella Rd.Mt. Pleasant, Michigan 48858

Phone: 800-733-8948 or 989-773-7981Fax: 800-669-0619 www.delfield.com

Only Models6125XL-S

6125XL-SH6151XL-S

6151XL-SH

Exterior: Top and bottom are constructed of 24-gauge galvanized steel. Exterior sides are 0.032 aluminum. Front housing is 22-gauge stainless steel.

Doors: Unit is provided with hinged solid front door(s). Door exterior is constructed of 22-gauge stainless steel. Interior door liner is ABS. Doors are provided with locks, magnetic gaskets, self-closing, edgemount hinges; and quick grip long length door handle(s).

Interior: Liner is constructed of seamless, one piece ABS material with 15 molded shelf supports spaced 3.00” (76mm) apart. Three epoxy coated wire shelves, rated at 250 lb. load capacity each, are provided per section. Liner comes with a limited lifetime warranty.

Units are completely insulated with a minimum of 2.00” (5cm) high density foamed in place environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane.

Interior is lighted by one 40-watt incandescent light on one and two door models, and two 40-watt incandescent lights on three door models. Lights are located outside of the food zone. Door activated switches control the lights.

Refrigeration system: All components are mounted to the exterior cabinet ceiling, outside the food zone and are assembled as one piece and can be removed as one piece. Environmentally friendly R404A refrigerant is used. System has the capability of maintaining between -5˚F and 0˚F in heavy use food service operations. Refrigerant is metered using a highly responsive thermostatic expansion valve. On demand, evaporator defrost is automatic using a temperature initiated/temperature terminated system with electric heaters. System is controlled using Delfield’s ACT-Advanced Control Technology electronic temperature control, which provides improved pull down times, reducing compressor cycling and longer compressor life with lower energy consumption.

Evaporator condensate is eliminated using an energy efficient hot gas system. Temperature is displayed with digital display using a blue LED.

Others: Unit is supplied standard with a 10’ cord and plug, attached. 4” diameter casters with an overall height of 5” are mounted on the unit from the factory on self-contained models ( 2&3 section units only).

Remote units are standard with legs. Legs are constructed of painted metal and are 6” high with 1” adjustability to compensate for installation location factors.

Specifications

Standard Features• Stainless steel doors and front shroud• Aluminum sides• Seamless, Delrite® ABS interior liner• Top mounted refrigeration system• High performance Delflow refrigeration,

designed to maintain -5˚F to 0˚F• Ships with casters mounted from factory

(2&3 section units only)• Easy to adjust epoxy shelves (three per

section)• Easy to read digital thermometer with

visual high/low temp alarm• 10’ cord and plug attached• Edgemount door hinges• Pressure relief valve is standard to

prevent door vapor lock• High density foamed in place

environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane insulation

• 6125XL-S Single section full height doors• 6151XL-S Two section full height doors• 6176XL-S Three section full height doors• 6125XL-SR Remote full height doors• 6151XL-SR Remote full height doors• 6176XL-SR Remote full height doors

• 6125XL-SH Single section half height door• 6151XL-SH Two section half height door• 6176XL-SH Three section half height door• 6125XL-SHR Remote half height door• 6151XL-SHR Remote half height door• 6176XL-SHR Remote half height door

Models

6100XLSolid Door Reach-in Freezer

6100XL: Solid Door Reach-in Freezer

keeps energy costs low• Environmentally friendly R404a

refrigerant• One year parts and labor, 5 year

compressor warranty, limited lifetime liner warranty

• Interior accepts 18” x 26” sheet pans

• Self closing doors with stay open feature at 120˚

• Ergonomically correct, easy grip door handles

Options & Accessories• Extra shelves• Non standard hinging• Legs in lieu of casters• Tray rack (TR-8B)• Stainless steel ends/backs• 220/60/1 voltage package

6125XL-SH

Delfield 6125XL-S Item#:20



Phone: 800-733-8948 or 989-773-7981Fax: 800-669-0619www.delfield.com

Door Clearance DetailAll Models

Typical End/Section ViewAll Models

Interior Elev. View6125XL-S & 6125XL-SR

Interior Elev. View6151XL-S & 6151XL-SR

Interior Elev. View6176XL-S & and 6176XL-SR

6100

XLSo

lid D

oor

Reac

h-i

n F

reez

ers

Printed in the U.S.A.DS6100XLS07/11

Plan View6125XL-S

Plan View6151XL-S

Plan View6176XL-S

Elevation View6125XL-S & 6125XL-SR

Elevation View6151XL-S & 6151XL-SR

Elevation View6176XL-S & and 6176XL-SR

Specifications

Model Voltage Amps Storage Capacity FT3

Shelf Capacity FT2 H.P. BTU Ship Weight Nema

PlugEnergy

(KWH/Day)

6125XL-S, 115 9.0 20.0 15.1 1/2 1516 274lbs/124kg 5-15P 6.69

6125XL-SH 115 9.0 20.0 15.1 1/2 1516 274lbs/124kg 5-15P 7.05

6151XL-S 115 12.0 43.5 33.2 3/4 1923 454lbs/206kg 5-15P 11.03

6151XL-SH 115 12.0 43.5 33.2 3/4 1923 454lbs/206kg 5-15P 12.55

6176XL-S, SH 120/208 20.0 66.5 48.3 1/2, 3/4 1516/1923 622lbs/282kg 14-20P 15.59

Remote units supplied with: Evaporator coil, solenoid valve, expansion valve, and temperature control. Condensing units to be sized and supplied by others.

Remote Model Voltage Amps Storage Capacity FT3

Shelf Capacity FT2 H.P.* BTU Ship Weight Nema

PlugEnergy

(KWH/Day)

6125XL-SR, SHR 115 2.0 20.0 15.1 1/2 1516 274lbs/124kg 5-15P N/A

6151XL-SR, SHR 115 3.0 43.5 33.2 3/4 1923 454lbs/206kg 5-15P N/A

6176XL-SR, SHR 115 4.0 66.5 48.3 1/2, 3/4 1516/1923 622lbs/282kg (2)5-15P N/A

*Recommended; will vary with refrigerant used, contact factory.

Delfield reserves the right to make changes to the design or specifications without prior notice.

25.86”66cm

79.50”202cm

79.50”202cm

51.6

3”13

1cm

57.31”146cm

56.82”144cm

25.37”64cm

27.12”69cm

13.00”33cm

79.50”202cm

61.50”156cm

5.00”13cm

79.50”202cm

25.50”65cm

32.80”83cm

51.00”130cm

32.80”83cm

76.50”193cm

32.80”83cm

19.75”50cm

20.50”50cm

20.50”50cm

19.75”50cm

20.50”50cm

20.50”50cm

4.00”10cm

4.00”10cm

79.50”202cm

79.50”202cm

51.6

3”13

1cm

57.31”146cm

56.82”144cm

25.37”64cm

27.12”69cm

13.00”33cm

79.50”202cm

61.50”156cm

5.00”13cm

79.50”202cm

25.50”65cm

32.80”83cm

51.00”130cm

32.80”83cm

76.50”193cm

32.80”83cm

19.75”50cm

20.50”50cm

20.50”50cm

19.75”50cm

20.50”50cm

20.50”50cm

4.00”10cm

4.00”10cm

Delfield 6125XL-S Item#:20


Continental Refrigerator Model: 2R Item #21


ITEM# 21 - REACH-IN REFRIGERATOR, 2 SECTIONS (1 REQ'D)

Continental Refrigerator 2R

Refrigerator, reach-in, two-section, self-contained refrigeration, aluminum exterior & interior, stainlesssteel front & doors, standard depth cabinet, narrow full-height doors, with exterior dial-typethermometer, electric condensate evaporator, 5" casters, 1/3 hp, ENERGY STAR®

Mfr Qty Model Spec

ACCESSORIES

Standard warranty: 1 year parts and labor1Continental Refrigerator

115v/60/1, 10' cord, NEMA 5-15P, standard1Continental Refrigerator

Refrigerator: Self-Contained refrigeration, 1/3hp, standard

1Continental Refrigerator

Compressor warranty: 5 year compressor1Continental Refrigerator

Left Door hinged on left & right door hinged onright, standard


5" Casters, standard1Continental Refrigerator

Pan Slide Assembly, full section for 18 x 26 or(2) 18 x 14 pans on 3" centers, bottom support,stainless steel angle (holds 16 per full section)

50-P008A1Continental Refrigerator

APPROVED ALTERNATES: TRUE, BEVERAGE AIR


ELECTRICAL

PHASE AFF

9.1 1/35-15P120 60 Cord & Plug11


Toll-Free: 800-523-7138Phone: 215-244-1400Fax: 215-244-9579

539 Dunksferry RoadBensalem, PA 19020 www.continentalrefrigerator.com

Product Specifications

Project Name:

Model Specified:

Location:

Item No: Quantity:

APPROVAL:

OPTIONS AND ACCESSORIES

2R - Two Section RefrigeratorSolid Doors, Self-ContainedUnits available in one, two and three sections. All upright models contain 3” non-CFC polyurethane foam insulation. Our selection of Reach-In Refrigerators are available in standard depth, Shallow Depth, Slim Line and Extra Wide models.

R E A C H - I N R E F R I G E R A T O R

ENERGY STAR® Qualified Commercial Refrigerator

Stainless steel case back• Adjustable Legs•

Pan slide assemblies• Half doors•

Increased refrigeration systems• Pass-Thru•

Stainless steel shelves• Remote models•

Digital thermometer• Shallow-Depth•

Rehinging of doors (• consult factory) Hinged glass doors•

Expansion valve system • Special electrical requirements• (consult factory)

DIMENSIONAL DATA

Net Capacity (cu. ft.) 48 (1359 cu l)

Width, Overall (in.) 52 (1321 mm)

Depth, Overall (incl. handles) (in.) 353/8 (899 mm)

Depth [less door(s)] (in.) 32 (813 mm)

Depth [door(s) open 90°] (in.) 551/2 (1410 mm)

Clear Door Width (in.) 193/8 (492 mm)

Clear Full Door Height. (in.) 585/8 (1489 mm)

Clear Half Door Height. (in.) 271/2 (699 mm)

Height, Overall (incl. 5” casters) (in.) 821/4 (2089 mm)

No. of Full Door(s) 2

No. of Half Door(s) 4

No. of Shelves 6

Shelf Area (sq. ft.) 40.8 (3.8 sq m)

Tray Slide Capacity (half) 11 ea.

Tray Slide Capacity (full) 24 ea.

REFRIGERANT DATA

Condensing Unit Size (H.P.) 1/3

Capacity (BTU/Hr)* 2560

ELECTRICAL DATA

Cabinet 115/60/1

Feed Wires (incl. ground) 3

Condensing Unit 115/60/1

Total Amps 9.1

Cabinet Amps 1.9

SHIPPING DATA

Height - Crated (in.) 851/2 (2172 mm)

Width - Crated (in.) 64 (1626 mm)

Depth - Crated (in.) 42 (1067 mm)

Volume - crated (cu. ft.) 133 (3766 cu l)

Weight Standard - Crated (lbs.) 520 (236 kg)

Weight SS - Crated (lbs.) 600 (272 kg)

Weight Standard - Uncrated (lbs.) 350 (159 kg)

Weight SS - Uncrated (lbs.) 430 (195 kg)

* Rating @ +25°F evaporator, 90°F ambientFigures in parentheses reflect metric equivalents.

IMPORTANT NOTE: If the cabinet is located directly against a wall and/or under a low ceiling, a minimum clearance of 12” is required.

Consult factory for other model configurations, options and accessories.

Continental Refrigerator 2R Item#:21


© Copyright 2010. Continental Refrigerator. A Division of National Refrigeration & Air Conditioning Products, Inc.

®

Due to our continued efforts in developing innovative products, specifications subject to change without notice.

MADE IN THE U.S.A.

Standard Design Features

This Continental Refrigerator product is warranted to be free from all manufacturing defects, material or workmanship, for a period of one (1) year from date of original installation, or fifteen (15) months from date of shipment, whichever occurs first. All motor-compres-sor assemblies are warranted to be free from defects, material and workmanship, for a period of five (5) years from date of installation.

05/27/10

Equipped with one NEMA-5-15P Plug



REFRIGERATION SYSTEM

Environmentally-safe R-134a refrigerant

CABINET ARCHITECTURE

3” non-CFC polyurethane foam insulation

Chrome-plated flow line handles

Cam action, lift off hinges

Self-closing doors

Magnetic snap-in door gasket

Cylinder lock in each door

5” casters

Heavy-duty epoxy-coated steel shelves

MODEL FEATURES

Automatic interior lighting

Exterior dial thermometer

Automatic, energy-saving, electric condensate evaporator

ELECTRICAL

Completely pre-wired at factory for connection to 115/60/1 phase, 15 amp dedicated outlet

10 ft. cord and plug set included, 90° with NEMA

STANDARD

Stainless steel front, aluminum end panels and interior

SUFFIX SA

Stainless steel exterior, aluminum interior

SUFFIX SS

Stainless steel exterior and interior


2R - Two Section RefrigeratorModel Blueprint

2R (10/7/10)

583/4”(1492 mm)

Door Opening

193/8”(492 mm)

Door Opening

52”(1321 mm)

5”(127 mm)

Casters

821/4”(2096 mm)

13” (330 mm)

12” (305 mm)

543/4”(1391 mm)

261/2”(695 mm)

32”(813 mm)

34”(864 mm)

353/8”(899 mm)

RIGHT VIEW

FRONT VIEW

583/4”(1492 mm)

Door Opening

193/8”(492 mm)

Door Opening

52”(1321 mm)

5”(127 mm)

Casters

821/4”(2096 mm)

13” (330 mm)

12” (305 mm)

543/4”(1391 mm)

261/2”(695 mm)

32”(813 mm)

34”(864 mm)

353/8”(899 mm)



Continental Refrigerator Model: 1F Item #22


ITEM# 22 - REACH-IN FREEZER (1 REQ'D)

Continental Refrigerator 1F

Freezer, reach-in, one-section, self-contained refrigeration, stainless steel front & doors, aluminumexterior & interior, standard depth cabinet, full-height solid door, exterior dial-type thermometer,electric condensate evaporator, 5" casters, 1/3 hp

Mfr Qty Model Spec

ACCESSORIES


115v/60/1, 7.6 amps, 10' cord, NEMA 5-15P,standard


Freezer: Self-Contained refrigeration, 1/3 hp,standard






ELECTRICAL

PHASE AFF

7.6 1/35-15P120 60 Cord & Plug11





Project Name:

Model Specified:

Location:

Item No: Quantity:

APPROVAL:


DIMENSIONAL DATA












No. of Shelves 3


Tray Slide Capacity (per half section) 8 ea.

Tray Slide Capacity (per full section) 16 ea.

REFRIGERANT DATA



ELECTRICAL DATA

Cabinet 115/60/1



Total Amps 7.6

Cabinet Amps 1.6

Defrost Amps 5.2

SHIPPING DATA


Width - Crated (in.) 315/8 (803 mm)







* Rating @ -15°F evaporator, 90°F ambientFigures in parentheses reflect metric equivalents.


1F - One Section FreezerSolid Door, Self-ContainedUnits available in one, two and three sections. All upright models contain 3” non-CFC polyurethane foam insulation. Our selection of Reach-In Freezers are available in standard depth, Shallow Depth, Slim Line and Extra Wide models.

• Stainless steel case back • Adjustable Legs

• Pan slide assemblies • Half doors

• Increased refrigeration systems • Pass-Thru

• Stainless steel shelves • Remote models

• Digital thermometer • Shallow-Depth

• Rehinging of doors (consult factory) • Hinged glass doors

• Expansion valve system • Special electrical requirements (consult factory)

R E A C H - I N F R E E Z E R

ENERGY STAR® Qualified Commercial Freezer


Continental Refrigerator 1F Item#:22



®


MADE IN THE U.S.A.



05/27/10





Environmentally-safe R-404A refrigerant





Self-closing doors



5” casters


MODEL FEATURES


External dial thermometer


Automatic electric defrost

Energy saving switch for door heater

ELECTRICAL


10 ft. cord and plug set included, 90° plug

STANDARD


SUFFIX SA


SUFFIX SS


R E A C H - I N F R E E Z E R

1F - One Section FreezerModel Blueprint

1F (5/10/11)

583/4”(1492 mm)

Door Opening

193/8”(492 mm)

Door Opening

5”(127 mm)

Casters

821/4”(2096 mm)

13” (330 mm)

12” (305 mm)

26”(660 mm)

543/4”(1391 mm)

29”(737 mm)

32”(813 mm)

34”(864 mm)

353/8”(899 mm)

SIDE VIEW

FRONT VIEW

583/4”(1492 mm)

Door Opening

193/8”(492 mm)

Door Opening

5”(127 mm)

Casters

821/4”(2096 mm)

13” (330 mm)

12” (305 mm)

26”(660 mm)

543/4”(1391 mm)

29”(737 mm)

32”(813 mm)

34”(864 mm)

353/8”(899 mm)

Continental Refrigerator 1F Item#:22


Item #23


ITEM# 23 -

<Spare>


Item #24


ITEM# 24 -

<Spare>


Edlund Model: U-12 Item #25


ITEM# 25 - CAN OPENER (1 REQ'D)

Edlund U-12

Can Opener, Quick change, Manual, with standard length bar and new plated base, NSF certified

Mfr Qty Model Spec

ACCESSORIES

1 yr. limited warranty, std.1Edlund

APPROVED ALTERNATE: OR EQUAL


Edlund proudly introduces the new Universal Series Manual Can Openers. The NSF certified U-12 opener includes

many of the same design features as our popular S-11, with quick change gear, stainless steel slide bar and pull pin for easy

blade replacement. Once again, Edlund raises the bar on can opener technology.

U-12 NSF Manual Can Openers

• NSF Certified

• Stainless steel blade and gear for longer life

• Replaceable base insert for a tighter fit and easier slide action

• Easily disassembled for easy cleaning

• Made in U.S.A.

Edlund U-12 Item#:25


Our reputation is virtually stainless.

The U-12 is available in both long and short bar lengths. The U-12 is easily disassembled

for increased sanitation.

MODEL # DESCRIPTION PRODUCT CODE CASE CUBE CASE WEIGHTFT3/M3 LBS./KGS

U-12 Quick change can opener with standard 14100 3.3/1.0 21/9.5length bar and new plated base

U-12 S Opener with stainless steel base 14200 3.3/1.0 21/9.5

U-12 C Opener with stainless steel clamp base 14010 3.3/1.0 22/9.9

U-12 L Opener with long bar and plated 14500 3.3/1.0 22/9.9steel base

U-12 SL Opener with long bar and stainless 14600 3.3/1.0 22/9.9steel base

U-12 CL Opener with long bar and cast 14300 3.3/1.0 22/9.9stainless steel clamp base

ST-93 Rustproof can opener cleaning tool 38500 .5/.2

SPECIFICATIONS:

Note: U-12 Series standard length bar is 16″ (40.6 cm) long. Extra long bar is 22″ (55.9 cm) long.

WARRANTY INFORMATION: THE EDLUND COMPANY WARRANTS THESE PRODUCTS TO BE FREE FROM DEFECTS IN MATERIAL AND WORKMANSHIP FOR A PERIOD OF ONE YEAR FROM DATE OF PURCHASE. THE COMPANY’S OBLIGATION UNDER THIS WARRANTY IS LIMITED TO REPAIRING OR REPLACING WITHOUT CHARGE ANY PART OR PARTS FOUND TO BE DEFECTIVEUNDER NORMAL USE. IT IS THE RESPONSIBILITY OF THE PURCHASER TO RETURN THE ENTIRE UNIT TO THE FACTORY, TRANSPORTATION CHARGES PREPAID. THIS WARRANTY DOES NOT COVER PARTS THAT MUST BE REPLACED UNDER NORMAL USE, INCLUDING KNIVES AND DRIVE GEARS ON CAN OPENERS. NO OTHER WARRANTY, WRITTEN OR VERBAL, IS AUTHORIZEDBY THE COMPANY. WARRANTY INFORMATION OUTSIDE THE UNITED STATES MAY VARY, CONSULT YOUR DISTRIBUTOR. 9/04 ED01-327

ST-93 Rustproof can opener cleaning tool

Around these parts, we make great can openers.That’s the long and short of it.

®

Edlund Company, Inc., 159 Industrial Parkway, Burlington, VT 05401 800-772-2126 www.edlundco.com

Our reputation is virtually stainless.

Both models available with choice of baseoptions: plated screw down, stainless screw down or stainless clamp down base.

Edlund U-12 Item#:25


Eagle Group Model: OB30120SE Item #26


ITEM# 26 - WORK TABLE (1 REQ'D)

Eagle Group OB30120SE

Spec-Master® Enclosed Work Table, 120"W x 30"D, open front, 14/304 stainless steel top with rollededges front & back, square turndown ends, stainless steel wrapper & legs, adjustable feet, NSF

Mfr Qty Model Spec

ACCESSORIES

Can opener hole with under table support(RIGHT END)

E321Eagle Group

For trim (left-to-right) around 2-drawer foodwarmers (Item 27)

E356 ftEagle Group

For trim (front to back panel) for built-in 2-drawer food warmers (Item 27)

E851Eagle Group





EG10.30 Rev. 11/08


SheetNo.

EG10.30

Spec-Master

®Enclosed

Worktables

with

FlatTop




S.I.S. No.:

Specification Sheet




Spec-Master® EnclosedWorktables with Flat TopMODELS:

Options / Accessories

CB2436SECB2448SECB2460SECB2472SECB2484SECB2496SECB24120SECB3036SECB3048SECB3060SECB3072SECB3084SECB3096SECB30120SE

OB2436SEOB2448SEOB2460SEOB2472SEOB2484SEOB2496SEOB24120SEOB3036SEOB3048SEOB3060SEOB3072SEOB3084SEOB3096SEOB30120SE

CBH2436SECBH2448SECBH2460SECBH2472SECBH2484SECBH2496SECBH24120SECBH3036SECBH3048SECBH3060SECBH3072SECBH3084SECBH3096SECBH30120SE

Design and Construction Features• All-welded design.• Available with open front, sliding doors, or hinged doors.• Doors are 20 gauge type 430 stainless steel.• Top mechanically polished to satin finish.• Sound-deadened between top and frame.• 15⁄8˝ (42mm)-diameter type 304 stainless legs.• 1˝ (25mm) stainless steel adjustable bullet feet.• 11⁄2˝ (38mm) sanitary rolled rim on front and back withsquare edge on ends for flush fit.

• Optional fixed center shelf available. To order, add suffix“-CS” to model number. Example: OB2436SE-CS

Lock (for units with doors)Casters*OvershelfCenter shelf

* To order table with 4˝ (102mm)-diameter casters, add suffix “-CA”(ex: OB3048SE-CA). To order table with 5˝ (127mm)-diameter casters,add suffix “-CAH” (ex: CB3048SE-CAH).

Short Form SpecificationsEagle Spec-Master® Enclosed Base Worktable, model________________. Top is 14/304 stainless steel, sides andback are heavy gauge stainless steel. (Open Front, Stainlesssteel Sliding Doors, or Stainless steel Hinged Door) modelswith 11⁄2˝ rolled edge on front and rear, sides turned down.Constructed with uni-lok® patented gusset system, with thegussets recessed into the hat channels to reduce lateralmovement. 15⁄8˝ O.D. stainless steel tubular legs with adjustablebullet feet.

Patented uni-lok® System(Patent No. 5,165,349)

enclosed worktablewith sliding doors

Eagle Group OB30120SE Item#:26




CatalogSp

ecificationSh

eetN

o.EG

10.30

Spec-M

aster®

Enclosed

Worktableswith

Flat

Top


S.I.S. No.:

Rev. 11/08




Spec-Master® Enclosed Worktables with Hinged Doors

Spec-Master® Enclosed Worktables with Open Front

Spec-Master® Enclosed Worktables with Sliding Doors

width length weightmodel # in. mm in. mm lbs. kgOB2436SE 24˝ 610 36˝ 914 132 59.9OB2448SE 24˝ 610 48˝ 1219 160 72.6OB2460SE 24˝ 610 60˝ 1524 200 90.7OB2472SE 24˝ 610 72˝ 1829 240 108.9OB2484SE 24˝ 610 84˝ 2134 281 127.5OB2496SE 24˝ 610 96˝ 2438 322 146.1OB24120SE 24˝ 610 120˝ 3048 366 166.0OB3036SE 30˝ 762 36˝ 914 136 61.7OB3048SE 30˝ 762 48˝ 1219 166 75.3OB3060SE 30˝ 762 60˝ 1524 199 90.3OB3072SE 30˝ 762 72˝ 1829 248 112.5OB3084SE 30˝ 762 84˝ 2134 294 133.4OB3096SE 30˝ 762 96˝ 2438 340 154.2OB30120SE 30˝ 762 120˝ 3048 432 196.0

width length weightmodel # in. mm in. mm lbs. kgCB2436SE 24˝ 610 36˝ 914 138 62.6CB2448SE 24˝ 610 48˝ 1219 170 77.1CB2460SE 24˝ 610 60˝ 1524 212 96.2CB2472SE 24˝ 610 72˝ 1829 254 115.2CB2484SE* 24˝ 610 84˝ 2134 299 135.6CB2496SE* 24˝ 610 96˝ 2438 339 153.8CB24120SE* 24˝ 610 120˝ 3048 384 174.2CB3036SE 30˝ 762 36˝ 914 142 64.4CB3048SE 30˝ 762 48˝ 1219 173 78.5CB3060SE 30˝ 762 60˝ 1524 219 99.3CB3072SE 30˝ 762 72˝ 1829 261 118.4CB3084SE* 30˝ 762 84˝ 2134 312 141.5CB3096SE* 30˝ 762 96˝ 2438 350 158.8CB30120SE* 30˝ 762 120˝ 3048 450 204.1

width length weightmodel # in. mm in. mm lbs. kgCBH2436SE 24˝ 610 36˝ 914 138 62.6CBH2448SE 24˝ 610 48˝ 1219 170 77.1CBH2460SE 24˝ 610 60˝ 1524 212 96.2CBH2472SE 24˝ 610 72˝ 1829 254 115.2CBH2484SE* 24˝ 610 84˝ 2134 299 135.6CBH2496SE* 24˝ 610 96˝ 2438 339 153.8CBH24120SE* 24˝ 610 120˝ 3048 384 174.2CBH3036SE 30˝ 762 36˝ 914 142 64.4CBH3048SE 30˝ 762 48˝ 1219 173 78.5CBH3060SE 30˝ 762 60˝ 1524 219 99.3CBH3072SE 30˝ 762 72˝ 1829 261 118.4CBH3084SE* 30˝ 762 84˝ 2134 312 141.5CBH3096SE* 30˝ 762 96˝ 2438 350 158.8CBH30120SE* 30˝ 762 120˝ 3048 450 204.1

* Note: Worktables 84˝ (2134mm) and longer have two sets of doors.


FRONT VIEW

FRONT VIEW SIDE VIEW

SIDE VIEW





EG10.50 Rev. 04/12


EG10.50

Table Modifications




S.I.S. No.:


Specification Sheet


















Cata

log

Spec

ifica

tion

Shee

t No.

Tabl

e M

odifi

catio

nsItem No.:


Rev. 04/12




EG10

.50












model # description





Wells Model: RWN-26 Item #27


ITEM# 27 - BUILT-IN WARMING DRAWER (2 REQ'D)

Wells RWN-26

Food Warming Drawer Unit, built-in, two drawers, capacity approximately 8 dozen rolls/drawer,stainless steel construction, humidity and thermostat controls, 676w/900w

Mfr Qty Model Spec

ACCESSORIES

208/240v/60/1-ph, 676/900w, 3.3/3.8 amps,NEMA 6-15P

220672Wells

APPROVED ALTERNATES: TOASTMASTER,EAGLE

KEC TO HAVE UNITS SHIPPED TO FABRICATOROF WORKCOUNTER W/ CABINET BASE (ITEM26) FOR FACTORY INSTALLATION


ELECTRICAL

PHASE AFF

3.3 .676208 60 Direct11


RWN-16, RWN-26, RWN-36 BUILT-IN NARROW DRAWER WARMERS

RW

N-16

, RW

N-26

, RW

N-36

BU

ILT-IN N

AR

RO

W D

RA

WER

WA

RM

ERS

I T E M N O .

W E L L S M A N U FA C T U R I N G

Features• Narrow width saves space while accommodating standard 12”x20” pans.

• Exclusive self-latching mechanism provides easy, one-touch, secure closing.

• Individual thermostatic temperature control on each drawer gives these warmers maximum versatility.

• Durable stainless steel tracks and bearings provide smooth, trouble-free operation.

• Adjustable front vent on each drawer allows for humidity control.

• A stainless steel pan is provided with each drawer and is capable of holding a standard 12” x 20” pan.

• Fully insulated for maximum efficiency.

• Models with optional built-in thermometer (T) are NSF approved for potentially hazardous foods.

• The RWN series Drawer Warmers are Underwriters Laboratories, Inc. LISTED and meet NSF International and Canadian standards.

• A one-year warranty against defects covers parts and labor.

Accessories / Options Humitrol Rack, stainless steel, one per drawer, non-splash, 20624

Optional Built-in Thermometer (T), for individual drawers, contact factory

Wells Built-In Narrow Drawer Warmers can keep a variety of foods hot and ready to serve. Their compact width saves valuable space, yet the drawers accept all standard 12” x 20” pans up to 6” deep. All Wells warmers come with individual controls on each drawer for temperature and humidity, allowing food to be hot and crispy in one drawer, warm and moist in another.

RWN-26

WELLS

SpecificationsOverall Dimensions: Inches MM Width 20 1/4 514 Depth 26 1/2 673 Height RWN-16 series 10 7/8 276 RWN-26 series 21 533 RWN-36 series 31 1/8 790Temperature Range: Fahrenheit Celsius RWN series 90º to 210º 32º to 99ºPre-Heat Time to 175˚ F: 120V & 240V 208V RWN series 15 minutes 22 minutesTypical Capacity: Dinner Rolls Individual drawer Appox. 8 doz.Weights: Lbs. KG

RWN-16 series: Installed 51 23 Shipping 63 29



Wells RWN-26 Item#:27


M O D E LR W N - 16

B U I LT- I N N A R R O W D R AW E R WA R M E R

D I M E N S I O N S : INCH(MM)


R W N - 16 E L E CT R I C A L S P E C I F I C AT I O N S :

RWN-16 120 450 3.8 SINGLE NONE



MODELS* VOLTS WATTS AMPS PHASE POWER SUPPLY CORD

STD.4

R

E6070

R

LISTEDE6070

R

LISTED

C

02/02 • REV(E) • PART NO. 49340

(241)

9 1/2

(514)

20 1/4

(276)

10 7/8

(498)

19 5/8

(381)

15

(673)

26 1/2

(143)

5 5/8

REAR SUPPORT

* RWNT-16 models are provided with a thermometer and have the same electrical specifications as the standard models.

NOTE: Specifications are subject to change without notice. See installation instructions prior to installing the unit. This document is not for installation purposes.



M O D E LR W N - 2 6




R W N - 2 6 E L E CT R I C A L S P E C I F I C AT I O N S :






02/02 • REV(E) • PART NO. 49340

(143)

5 5/8

(673)

26 1/2

(381)

15

(498)

19 5/8

(514)

20 1/4

(533)

21

(498)

19 5/8

REAR SUPPORT

C

LISTED

R

E6070LISTED

R

E6070

R

STD.4




M O D E LR W N - 3 6




WELLS MANUFACTURING COMPANY2 ERIK CIRCLE, PO BOX 280, VERDI, NV 89439 U.S.A. USA PHONE: (775) 689-5700 • FAX: (775) 689-5972FOR ORDERS ONLY: (888) 356-5362 • FAX: (800) 356-5142 www.wellsbloomfield.com© 2002 WELLS MANUFACTURING • PRINTED IN THE U.S.A.02/02 • REV(E) • PART NO. 49340

(756)

29 3/4(791)

31 1/8

(514)

20 1/4

(498)

19 5/8

(381)

15

(673)

26 1/2

(143)

5 5/8

REAR SUPPORT

R

LISTED

R

E6070

R

STD.4 E6070

R W N - 3 6 E L E CT R I C A L S P E C I F I C AT I O N S :









Item #28


ITEM# 28 -

<Spare>


Continental Refrigerator Model: SWF48 Item #29


ITEM# 29 - WORKTOP FREEZER (1 REQ'D)

Continental Refrigerator SWF48

Work Top Freezer, 48" wide, two-section, stainless steel flat top, (2) field rehingable doors, stainlesssteel front, aluminum sides & interior, 5" casters, rear mounted self-contained refrigeration, 1/2 hp

Mfr Qty Model Spec

ACCESSORIES

115v/60/1, 10' cord & plug, standard1Continental Refrigerator

Self-Contained refrigeration, 1/2 hp, standard1Continental Refrigerator

Electric Condensate Vaporizer, 115v/60/1, withcord and plug


Stainless steel end panels (includes both sides)1Continental Refrigerator

Stainless steel finished back1Continental Refrigerator

Casters, 5" standard1Continental Refrigerator



ELECTRICAL

PHASE AFF

7.6 1/35-15P120 60 Cord & Plug11


WORKTOPFREEZERS

Utilizing Environmentally Safe, CFC-free R-404A Refrigerant

Standard Features• Modern, State-of-the-Art Styling

• Performance Rated Refrigeration SystemUtilizing Environmentally Safe R-404ARefrigerant

• Easily Serviceable Back Mounted Compressor

• 2" Non-CFC Polyurethane Foam Insulation

• Spring Loaded, Self Closing Door

• Magnetic Snap-In Gasket

• 5" Casters

• Heavy-Duty, Epoxy-Coated Steel Shelves

• Interior Hanging Thermometer

• Unique Air Flow Distribution Keeps Product at

Uniformly Constant Temperatures

• Cabinet Construction Consisting of StainlessSteel Front and Top, Aluminum End Panels,CaseBack and Interior

• Non-Corrosive, Plasticized Fin Evaporator Coil

• Completely Enclosed, Vented and RemovableCase Back

• Automatic, Energy Saving, Non-ElectricCondensate Disposal

• 10' Cord and Plug Attached

• Automatic Electric Defrost

Optional Features & Accessories• Casters • Stainless Steel Legs

• Remote Models–R • Back Splash-BS

• Stainless Steel End Panels- • Stainless Steel Rear

SA Models Cover in Lieu of

• Stainless Steel Interior & Alumimum

Exterior-SS Models • Glass Door-GD

• Electric Condensate (SWF27 only)

• Additional Shelves • Door Locks

SWF32

SWF27

SWF60

SWF36

Models Available• SWF27 • SWF48

• SWF32 • SWF60

• SWF36

SWF48

Continental Refrigerator SWF48 Item#:29


WTFRZ108

A Division of National Refrigeration & A/C Products, Inc.

539 Dunksferry Road Bensalem, PA 19020

(800) 523-7138 Fax: (215) 244-9579

www.continentalrefrigerator.com

Worktop Freezers

SPECIFICATIONS SWF27 SWF32 SWF36 SWF48 SWF60

DIMENSIONAL DATANet Capacity (cu. ft.) 7.4 9.0 10.3 13.4 17.0

Width, Overall (in.) 271/2 32 36 48 60

Depth, Overall (incl. Hdls.) (in.) 30 30 30 30 30

Depth, Body Only (Less Door(s)(in.) 271/2 271/2 271/2 271/2 271/2

Height (incl. 5" Casters) (in.) 35 35 35 35 35

Shelf Area (sq. ft.) 3.5 3.9 4.6 6.8 8.1

No. of Shelves 1 1 2 2 2

No. of Doors 1 1 2 2 2

Interior Depth (in.) 20 20 20 20 20

Interior Height (in.) 261/4 261/4 261/4 261/4 261/4

Interior Width (in.) 241/2 28 32 44 56

Condensing Unit Size (H.P.) 1/4 1/3 1/3 1/3 1/3

Cabinet Electrical 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1

Amps 5.9 8.1 8.1 7.6 7.8

Fans 1 1 2 2 2

Shipping Weight (lbs.) 165 180 220 248 284

Shipping Height (in.) 431/4 431/4 431/4 431/4 431/4

Shipping Length (in.) 353/4 39 43 55 681/4

Shipping Depth (in.) 371/4 371/4 371/4 371/4 371/4

SWF27 SWF32

SWF36 SWF60SWF48

Continental Refrigerator SWF48 Item#:29


Continental Refrigerator Model: SW48 Item #30


ITEM# 30 - REFRIGERATED WORK TOP (1 REQ'D)

Continental Refrigerator SW48

Work Top Refrigerator, 48" wide, two-section, stainless steel flat top, (2) field rehingable doors,stainless steel front, aluminum sides & interior, 5" casters, rear mounted self-contained refrigeration,1/5 hp

Mfr Qty Model Spec

ACCESSORIES

115v/60/1, 10' cord & plug, standard1Continental Refrigerator

Self-Contained refrigeration, 1/5 hp, standard1Continental Refrigerator

Standard warranty: 1 year parts and labor; 5year compressor


Electric Condensate Vaporizer, 115v/60/1, withcord and plug


Stainless steel end panels (includes both sides)1Continental Refrigerator

Stainless steel finished back1Continental Refrigerator

Casters, 5" standard1Continental Refrigerator



ELECTRICAL

PHASE AFF

7.1 1/55-15P120 60 Cord & Plug11


WORKTOPREFRIGERATORS

Utilizing Environmentally Safe,

CFC-free R-134a Refrigerant

Standard Features•Modern, State-of-the-Art Styling

•Performance Rated Refrigeration System UtilizingEnvironmentally Safe R-134a Refrigerant

•Easily Serviceable Back Mounted Compressor

•2" Non-CFC Polyurethane Foam Insulation

•Spring Loaded, Self Closing Door

•Magnetic Snap-In Gasket

•5" Casters, two with brakes; two without brakes

•Heavy-Duty, Epoxy-Coated Steel Shelves

•Interior Hanging Thermometer

•Unique Air Flow Distribution Keeps Product atUniformly Constant Temperatures

•Cabinet Construction Consisting of Stainless SteelFront and Top, Aluminum End Panels,Case Backand Interior

•Non-Corrosive, Plasticized Fin Evaporator Coil

•Completely Enclosed, Vented and RemovableCase Back

•Automatic, Energy Saving, Non-ElectricCondensate Disposal

•10' Cord and Plug AttachedModels Available• SW27 • SW60

• SW32 • SW48

• SW36 • SW72

Optional Features & Accessories• Legs • Electric Condensate

• Remote Models R • Additional Shelves

• Stainless Steel End Panels- • Back Splash-BS

SA Models • Glass Door-GD

• Stainless Steel Interior & • Door Locks

Exterior-SS Models • Single Overshelf

• Stainless Steel Finished • Double Overshelf

Back in Lieu of Aluminum • Stainless Steel Roll

Out Drawers in Lieu of

Door-D

SW60

SW48SW27

Continental Refrigerator SW48 Item#:30


WTREF607

A Division of National Refrigeration & A/C Products, Inc.

539 Dunksferry Road Bensalem, PA 19020

(800) 523-7138 Fax: (215) 244-9579

www.continentalrefrigerator.com

SPECIFICATIONS SW27 SW32 SW36 SW48 SW60 SW72

DIMENSIONAL DATANet Capacity (cu. ft.) 7.4 9.0 10.3 13.4 17.0 20.6

Width, Overall (in.) 271/2 32 36 48 60 72

Depth, Overall (incl. Hdls.) (in.) 30 30 30 30 30 30

Depth, Body Only (Less Door(s)(in.) 271/2 271/2 271/2 271/2 271/2 271/2

Height (incl. 5" Casters) (in.) 35 35 35 35 35 35

Shelf Area (sq. ft.) 3.5 3.9 4.6 6.8 8.1 10.2

No. of Shelves 1 1 2 2 2 3

No. of Doors 1 1 2 2 2 3

Interior Depth (in.) 20 20 20 20 20 20

Interior Height (in.) 261/4 261/4 261/4 261/4 261/4 261/4

Interior Width (in.) 241/2 28 32 44 56 68

Condensing Unit Size (H.P.) 1/5 1/5 1/5 1/5 1/4 1/4

Cabinet Electrical 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1

Amps 6.1 6.3 6.3 7.1 7.6 8.6

Fans 2 2 2 3 3 4

Shipping Weight (lbs.) 165 180 220 248 284 318

Shipping Height (in.) 431/4 431/4 431/4 431/4 431/4 431/4

Shipping Length (in.) 353/4 39 43 55 681/4 801/4

Shipping Depth (in.) 371/4 371/4 371/4 371/4 371/4 371/4

WORKTOP REFRIGERATORS

Continental Refrigerator SW48 Item#:30




ITEM# 31 - WALL SHELVES (2 REQ'D)



Mfr Qty Model Spec

ACCESSORIES

Wall Mount Post Set, 33" post height, includes:(1) post, top and bottom mounting brackets,intermediate bracket, bolts to secure post tobracket, chromate finish

FWPS33CH2 stFocus Foodservice

Post Mount Wall Brackets, single, for 14" widthshelf, (2) chromate shelf caps and plastic splitsleeves, chromate finish,

FPMB14SCH4Focus Foodservice


2 TIER1 SECTIONWALL MOUNT BOTTOM SHELF AT 66" AFWALL MOUNT TOP SHELF AT 78" AFF


Item #

JobFOODSERVICE, LLC

FOC

US

WIR

E SH

ELVIN

G













FOODSERVICE, LLC


Length

Width


Wire Shelves

Split Sleeves

"S" Hooks

Posts






rev. 0311



Item #

JobFOODSERVICE, LLC

FOC

US

PO

ST-TY

PE A

ND

DIR

ECT W

ALL M

OU

NTS


For Wire ShelvesIdeal for storing items conveniently overhead or above work surfaces

Accommodate all 14" (35.5 cm), 18" (45.7 cm), 21" (53.0 cm), and 24" (61.0 cm) wide shelves. Wire lugs on brackets fit corner collar openings on shelves. Chrome plated shelf caps are included to cover openings in tops of shelves.

Choice of single or double supports. Double supports are used for continuous runs of shelving. Single supports are used at each end of a shelf. Available in chromate finish or green epoxy coated.

Post-Type Mounts• Versatile: Post-type mounting system can meet your

exact needs for wall shelving. Posts and supports are available to hold anything from a single small shelf to many tiers of shelving running continuously along a wall.

• Fast, Secure Assembly: Post has grooves along its entire length at 1" (25mm) intervals. Tapered plastic split-sleeves lock around any groove, and matching taper in opening of shelf collar creates secure positioning.

• Adjustable: Shelf supports and shelves can be positioned or repositioned on the post in 1" (25mm) increments.

Direct Mounts• One-piece construction: Brackets are securely

welded to the mounting plate for greater durability.

• Easy Installation: Because mounting plate is welded to the bracket, it is much easier to align and install bracket to a wall.

• Save Space: The back of the shelf is within a fraction of an inch from the wall.

Available for 12" wide shelving

POST-TYPE AND DIRECT WALL MOUNTS

Focus Foodservice, LLC • 120 Lakeview Parkway • Vernon Hills, IL 60061 • www.focusfoodservice.com



FOODSERVICE, LLC

JobPOST-TYPE AND DIRECT WALL MOUNTS For Wire Shelves

Posts

Shelf Brackets- Post Mounted

Post Height

DescriptionItem No.

ChromateItem No.


13 33.0 Post for single tier FWPS13CH FWPS13GN




63 160.0 Post for 4 tiers FWPS63CH —

Shelf Width

DescriptionItem No.

ChromateItem No.




21 53.0 Single Bracket FPMB21SCH —




21 53.0 Double Bracket FPMB21DCH —


Direct Wall MountsShelf Width

DescriptionItem No.

ChromateItem No.












Direct Wall Mounts Each consists of a shelf support welded to a mounting plate with two chrome plated shelf caps. Use single brackets at shelf ends and double brackets for adjoining shelves. Hardware to mount brackets to wall is NOT included. Please select according to type of wall. Order shelves separately.

DimensionsPost-Type Wall Mounts Each post assembly includes one post and 2 mounting brackets (top and bottom). One interme-diate bracket is supplied with 33" posts and 2 are supplied with 54" and 63" posts for greater security. Hardware to mount brackets to wall is NOT included. Please select according to type of wall. Order shelves separately.


rev. 0311



Eagle Group Model: T3048SEM-BS Item #32



Eagle Group T3048SEM-BS

Spec-Master® Work Table, 48"W x 30"D, 14/304 stainless steel top with 4-1/2" backsplash, box marineedge front & ends, heavy gauge stainless steel undershelf, (4) 1-5/8" O.D. heavy gauge stainless steellegs, 1" adjustable stainless steel feet, Uni-Lok® gusset system, NSF

Mfr Qty Model Spec

ACCESSORIES

Sink, 18" x 20" x 14" bowl, for 30"W tables,complete with faucet and basket drain (RIGHTEND)

E241Eagle Group



DIRECTSIZE

COLDSIZE

INDIRECTSIZE

HOTSIZE

HOTGPH

CONDENSERINLET SIZE

FILTEREDSIZE


WATER WASTE

HOTAFF

COLDAFF

FILTEREDAFF

1/2" 1-1/2"1/2"1 1


worktable with backsplash and adjustable undershelf


EG10.45D Rev. 01/12


EG10.45D

Spec-Master

®M

arine Series Worktables w

ith Backsplash and Stainless Steel Base with Undershelf


Short Form SpecificationsEagle worktables, Spec-Master® Marine series, model_______________. Top constructed of 14/304 stainless steel,with 21⁄16˝ marine counter style edging on all four sides and 41⁄2˝backsplash. Adjustable undershelf constructed of 18/304stainless steel with marine edge. Top reinforced with stainlesssteel hat channels and sound deadened. Constructed with uni-lok® patented gusset system with the gussets recessed intothe hat channels to reduce lateral movement. 15⁄8˝-diameterstainless steel legs, with stainless steel gussets and 1˝ stainless steel adjustable bullet feet.



S.I.S. No.:

Worktables with Backsplash and Stainless Steel Base with Undershelf—Spec-Master® Marine Series

Specification Sheet



Tabletop• Patented uni-lok® gusset system (patent #5,165,349): gussets

are recessed into hat channel, reducing lateral movement. • Top reinforced with welded-on hat channel. • Sound-deadened between top and channels. • 41⁄2˝ (114mm)-high 90° backsplash with 1˝ (25mm) turn at 90°.• Marine counter edge on front and ends. • 14 gauge type 304 polished stainless steel.

Adjustable Undershelf• Heavy gauge stainless steel. • Gusset welded to each corner. • Heavy duty marine edge design.

Legs—15⁄8˝ (41mm)-diameter• Tables 96˝ (2438mm) and longer come with six legs or more. • Heavy gauge stainless steel. • 1˝ (25mm) adjustable stainless steel feet.


T2424SEM-BST2430SEM-BST2436SEM-BST2448SEM-BST2460SEM-BST2472SEM-BST2484SEM-BST2496SEM-BS



MODELS: T24108SEM-BST24120SEM-BST24132SEM-BST24144SEM-BST3030SEM-BST3036SEM-BST3048SEM-BST3060SEM-BS


Options / AccessoriesDrawerLockCastersStainless steel bullet feetOvershelvesPower strip (for material handling)

Duplex receptaclesPot rackSinkAdditional undershelfStabilizer Bar (for 30˝- and 36˝-wide tables)

Eagle Group T3048SEM-BS Item#:32




Cata

log

Spec

ifica

tion

Shee

t No.

EG10

.45D

Spec

-Mas

ter®

Mar

ine

Serie

s W

orkt

able

s w

ith B

acks

plas

h an

d St

ainl

ess

Stee

l Bas

e w

ith U

nder

shel

f

Rev. 01/12


Worktables with Backsplash and Stainless Steel Base with Undershelf—Spec-Master® Marine Series



TOP VIEW

**For�custom�sizes�-�fill�in�requireddimensions�in�layout�provided

SIDE VIEWFRONT VIEW


S.I.S. No.:

# of width length weightmodel # legs in. mm in. mm lbs. kgT2424SEM-BS 4 24˝ 610 24˝ 610 47 21.3T2430SEM-BS 4 24˝ 610 30˝ 762 53 24.0T2436SEM-BS 4 24˝ 610 36˝ 914 58 26.3T2448SEM-BS 4 24˝ 610 48˝ 1219 69 31.3T2460SEM-BS 4 24˝ 610 60˝ 1524 80 36.3T2472SEM-BS 4 24˝ 610 72˝ 1829 94 42.6T2484SEM-BS 4 24˝ 610 84˝ 2134 107 48.5T2496SEM-BS 6 24˝ 610 96˝ 2438 125 56.7T24108SEM-BS 6 24˝ 610 108˝ 2743 156 70.3T24120SEM-BS 6 24˝ 610 120˝ 3048 169 76.7T24132SEM-BS 8 24˝ 610 132˝ 3353 183 83.0T24144SEM-BS 8 24˝ 610 144˝ 3658 196 88.9T3030SEM-BS 4 30˝ 762 30˝ 762 55 24.9T3036SEM-BS 4 30˝ 762 36˝ 914 58 26.3T3048SEM-BS 4 30˝ 762 48˝ 1219 77 34.9T3060SEM-BS 4 30˝ 762 60˝ 1524 89 40.4T3072SEM-BS 4 30˝ 762 72˝ 1829 103 46.3T3084SEM-BS 4 30˝ 762 84˝ 2134 119 54.0T3096SEM-BS 6 30˝ 762 96˝ 2438 143 64.9T30108SEM-BS 6 30˝ 762 108˝ 2743 165 74.4T30120SEM-BS 6 30˝ 762 120˝ 3048 187 84.8T30132SEM-BS 8 30˝ 762 132˝ 3353 207 93.9T30144SEM-BS 8 30˝ 762 144˝ 3658 228 103.4T3648SEM-BS 4 36˝ 914 48˝ 1219 85 38.6T3660SEM-BS 4 36˝ 914 60˝ 1524 99 44.9T3672SEM-BS 4 36˝ 914 72˝ 1829 117 53.1T3684SEM-BS 4 36˝ 914 84˝ 2134 135 61.2T3696SEM-BS 6 36˝ 914 96˝ 2438 145 65.8T36108SEM-BS 6 36˝ 914 108˝ 2743 186 84.4T36120SEM-BS 6 36˝ 914 120˝ 3048 211 95.7T36132SEM-BS 8 36˝ 914 132˝ 3353 238 108.0T36144SEM-BS 8 36˝ 914 144˝ 3658 263 119.3

marine counter edge construction

21⁄16˝52mm

Eagle Group T3048SEM-BS Item#:32



EG10.50 Rev. 04/12


EG10.50

Table Modifications




S.I.S. No.:


Specification Sheet


















Cata

log

Spec

ifica

tion

Shee

t No.

Tabl

e M

odifi

catio

nsItem No.:


Rev. 04/12




EG10

.50












model # description





Vulcan Model: VP18 Item #33


ITEM# 33 - PROOFER HOLDING CABINET / EXISTING (1 REQ'D)

Vulcan VP18

Proofing Heated Cabinet, mobile, non-insulated, (18) 18" x 26" x 1" sheet pans or (36) 12" x 20" x 2-1/2" steam table pans, fan & air tunnel, adjustable tray slides, 1/2 gallon water pan, switch can be setto proof or set for heated holding up to 190° F, glass door, stainless steel construction, includes driptrough & removable drip pan, 5" casters; 2 swivel, 2 rigid with locks, cUL

<Existing>


F41192 (05/11)

H O L D I N G & T R A N S P O R T

P.O. Box 696 ■ Louisville, KY 40201 ■ Toll-free: 1-800-814-2028 ■ Local: 502-778-2791 ■ Quote & Order Fax: 1-800-444-0602

a division of ITW Food Equipment Group LLC

Item # C.S.I. Section 11420

VP1818 PAN NON-INSULATED

HEATED HOLDING & PROOFING CABINET

Model VP18

UL listed to Canadian safety standards. Classify by UL to NSF Std. #4

SPECIFICATIONS

Eighteen level heated holding and proofing cabinet, Vulcan Hart Model No. VP18. Heavy duty 20 gauge polished stainless steel cabinet. Four 5" casters, two swivel with brakes, two rigid. Glass door with heavy duty hinges, door latch mechanism and gaskets. Adjustable interior pan supports adjust on 3" centers and are removable for easy cleaning. Accommodates up to eighteen 18" x 26" sheet pans and thirty six 12" x 20" x 23⁄4" steam table pans. Includes 1⁄2 gallon water pan for proofing, drip trough and removable condensation pan on the bottom of cabinet. Top mounted, recessed control panel includes fan on/off switch, dial thermostat adjustable from ambient to 190°F, cabinet temperature thermometer, and switch to change from proofing to holding. 2,000 total watt heating elements with stainless steel cover, 16.7 total amp draw. Lifetime warranty on the heating elements. Requires 120 volt single phase power supply. Furnished with top mounted power cord with strain relief and NEMA 5-20 plug.

Exterior Dimensions:

251⁄4" W x 303⁄4" D x 71" H

STANDARD FEATURES

■ Eighteen level heated holding and proofing cabinet accepts eighteen 18" x 26" pans or thirty-six 12" x 20" pans

■ Heavy duty 20 gauge polished stainless steel cabinet

■ Set of 5" casters, two swivel with brakes and two rigid

■ Full size glass door with field reversible heavy duty hinges, door latch mechanism, and gaskets provide visibility of the contents in the cabinet

■ Adjustable interior pan supports adjust on 3" centers and are removable for easy cleaning

■ Top mounted, recessed control panel includes fan on/off switch, dial thermostat adjustable from ambient to 190°F, cabinet temperature thermometer, and switch to change from proofing to holding

■ Top mounted control panel is easy to use and out of the way of brooms, mops, and feet. Control panel on top eliminates removing control panel for cleaning

■ Fan and air tunnel provide even heat distribution

■ 2,000 total watt heating elements with stainless steel cover, 16.7 amps total draw

■ Requires 120 volt, single phase power supply

■ Furnished with top mounted power cord with strain relief and NEMA 5-20 plug

■ Furnished with ten pairs of tray slides

■ Includes 1⁄2 gallon water pan for proofing, drip trough and removable condensation pan on the bottom of cabinet

■ Lifetime warranty on the heating elements

■ One year limited parts and labor warranty

Vulcan VP18 Item#:33


NOTE: In line with its policy to continually improve its products, Vulcan reserves the right to change materials and specifications without notice.F41192 (05/11)



H O L D I N G & T R A N S P O R T

CAPACITY DIMENSIONS ELECTRICAL SHIPPING WEIGHTS

18" X 26" PANS

12" X 20" PANS EXTERIOR VOLTS WATTS AMPS LBS / KG

18 36 251⁄4" W x 30 3⁄4" D x 71" H 120 2,000 16.7 236 lbs. / 107 kg.

VP1818 PAN NON-INSULATED

HEATED HOLDING & PROOFING CABINET

Vulcan VP18 Item#:33




ITEM# 34 - SHELVING UNIT / EXISTING (4 REQ'D)



<Existing>

Mfr Qty Model Spec

ACCESSORIES

Post, 74"H, stationary, chromate finish<Existing>

FG074C4Focus Foodservice


Item #

JobFOODSERVICE, LLC

FOC

US

WIR

E SH

ELVIN

G













FOODSERVICE, LLC


Length

Width


Wire Shelves

Split Sleeves

"S" Hooks

Posts






rev. 0311



Item #

JobFOODSERVICE, LLC

FOC

US

DU

NN

AG

E SH

ELVES

DUNNAGE SHELVES • Superior Strength: Dunnage shelves offer

considerably more weight-bearing capacity than other Focus shelves. They can be combined with other Focus shelves to provide extra strength at the lower levels of a shelving unit where the heaviest loads will be placed. The 36" (91.4 cm) length shelf has a 1,600-pound (727 kg) uniformly distributed static load capacity, the 48" (121.9 cm) shelf holds up to 1,300-pounds (591 kg), and the 60" (152.5 cm) shelf holds up to 1,000 pounds (455 kg).

• Stress Resistance: The high static-load capacity of these dunnage shelves translate into an increased ability to stand up under the strain of unbalanced loads and the stress of materials repeatedly being placed on the shelf typical of a commercial food service operation.

• Shelf Construction: These dunnage shelves have the same tapered corners and split sleeves that accommodate the 1" (25 mm) posts used for other Focus shelving. They assemble easily, fit securely, and are compatible with same sized Focus wire shelving.

• Two-Piece Design: Removable wire deck fits over reinforced 1" (25 mm) square, tubular frame. It lifts off for easy, thorough cleaning.

• Smooth Loading & Unloading: The front-to-back upper ribs of the deck allow you to slide items on and off the shelves smoothly.

• Adjustable: Rolled grooves on the posts enable dunnage shelves to be positioned at desired levels in 1" (25 mm) increments.

• Finishes: Available in chrome-plated and green epoxy coated.


Focus Foodservice FG074C Item#:34


FOODSERVICE, LLC

Job DUNNAGE SHELVES

Shelves

Specifications

• Shelves: The shelf support frame is made of 1” (25 mm) square tubing. The removable wire deck is made from 5/16” (8.0 mm) diameter wire. Available in chrome-plated and green epoxy coated finishes.

• Posts: Posts have an outside diameter of 1” (25 mm) with rolled grooves in 1” (25 mm) increments along the entire length. Available in chrome-plated and green epoxy coated finishes.

�Important: Stability decreases as the ratio of height to width increases when heavier loads are placed on the upper shelves. Keep units as wide and low as possible, using the dunnage shelf as the bottom shelf. If two dunnage shelves are being used, both should be placed within the lower half of the unit. Dunnage shelves are not recommended for use in shelf carts or trucks.


Width Length Approx Pkg Wt.

(in.) (cm) (in.) (cm) (lbs.) (kg)

FFSM1836CH FFSM1836GN 18 45.7 36 91.4 20.8 9.5

FFSM1848CH FFSM1848GN 18 45.7 48 121.9 27.4 12.5

FFSM1860CH FFSM1860GN 18 45.7 60 152.4 33.9 15.4

- FFSM2430GN 24 61 30 76 17.3 7.9

FFSM2436CH FFSM2436GN 24 61 36 91.4 25.3 11.5

FFSM2448CH FFSM2448GN 24 61 48 121.9 33.2 15.1

FFSM2460CH FFSM2460GN 24 61 60 152.4 41.2 18.7

Posts


Height Approx Pkg Wt.

(in.) (cm) (lbs.) (kg)

FG007C FG007G 7 17.8 0.5 0.2

FG013C FG013G 13 33 0.9 0.4

FG033C FG033G 33 83.8 2.0 0.9

FG054C FG054G 54 137.2 3.1 1.4

FG063C FG063G 63 160.0 3.6 1.6

FG074C FG074G 74 188.0 4.2 1.9

FG086C FG086G 86 218.4 4.9 2.2


rev. 0311

Focus Foodservice FG074C Item#:34


Custom Model: SSWP Item #35


ITEM# 35 - STAINLESS STEEL WALL PANELS / EXISTING (1 REQ'D)

Custom SSWP

Stainless Steel Wall Panels

<Existing>


Garland/US Range Model: MST24B Item #36


ITEM# 36 - CHARBROILER, GAS, 24" / EXISTING (1 REQ'D)

Garland/US Range MST24B

Master Series Charbroiler, gas, 24" W x 23" D grill area, briquettes, flat/tilt grates, reversible grates,spark ignition, pilot valve with flame fail, 1-1/4" front manifold, storage base, stainless steel front andsides (stainless steel exposed sides on batteries), 6" legs, 60,000 BTU (Garland)

<Existing>


Garland Commercial Ranges Ltd.1177 Kamato Road, Mississauga, Ontario L4W 1X4 CANADA

General Inquiries 1-905-624-0260USA Sales, Parts and Service 1-800-424-2411 Canadian Sales 1-888-442-7526 Canada or USA Parts/Service 1-800-427-6668

Master Series Heavy DutyRange-Match Char-Broiler

Item: ______________________________

Quantity: __________________________

Project: ____________________________

Approval: __________________________

Date: ______________________________

Master Series H

eavy Duty Range-M

atch Char-Broiler

Models: MST17B MST24B MST34B MST17BE

MST24BE MST34BE MST17BT MST24BT MST34BT

Specification:MasterSeriesChar‑broilerwithstainlesssteelfrontandsides.Broilingareaconsistsofheavydutyracksectionswhichareeasilymovedforflatortiltpositionbroiling.Dualsided,castironbroilergrateswith1/2"(13mm)roundedbar,(boardbrand)anddiamond(fine)patternonoppositeside.15,000BTU(4.39kW)burnerscontrolledbyindividualHi‑Lovalves.Sentrytotalflamefailurepro‑tectionforallburnersLargecapacityfulllengthgreasedrawers.Heavy‑weight,longlastingbriquettes.Cabinet,17"(432mm),24"(610mm),or34"(864mm),wideby34"(869mm)deep,withtwostainlesssteelfull‑sizedhingeddoorsandfront.Naturalgasorpropane.Availableinmodu‑larmodels,suffixBT

Standard Features:• Stainlesssteelfrontdoors• Stainlesssteelfrontandsides• Stainlesssteelfrontrail• 1‑1/4"NPTfrontmanifold• Dualsided,castironbroilergrates

with1/2"(13mm)roundedbar,(boardbrand)anddiamond(fine)patternonoppositesides

• 15,000BTU(4.39kW)burners,• Piezosparkignitionwithconstant

burningpilots• Storagebaseinteriorofaluminized

steel• Modulartopbroilers(suffix"BT"),

modularbroileris14‑1/2"(368mm)frombroilerbasetoworkingheight

• 6"(152mm)chromedsteeladjust‑ablelegs

• ElectricSparkignitiononallpilotsSuffix‑Emodels

• Sentrytotalflamefailureprotec‑tionforallburners

Optional Features: Stainlesssteelmainback Reargasconnection;3/4"NPT Gasregulator3/4"or1‑1/4" Gasshutoffvalve;3/4",1"or1‑1/4"

NPT Gasflexhose&quickdisconnect

(3/4",1"or1‑1/4"NPTx5')w/restrainingdevice,pleasespecify

Endcapsandcover(NC,specify) Stainlesssteelbackguard:10"

(354mm),17"(432mm)or33"(838mm)

Dual‑sided,steeldiamond,(fine)inlieuofcastirongrate

Daisbase Swivelcasters(4)w/frontbrakes Polyurethanenon‑markingswivel

casters(4)w/frontbrakes 6"(152mm)stainlesssteeladjust‑

ablelegs 230volt,50cyclecomponents,

electricignition,(export)

Range-Match Char-Broilers

NOTE:Broilerssuppledwithcastersmustbeinstalledwithanapprovedrestrainingdevice.

Model MST34B

®

Garland/US Range MST24B Item#:36


Garland Commercial Ranges Ltd.1177 Kamato Road, Mississauga, Ontario L4W 1X4 CANADA

General Inquiries 1-905-624-0260USA Sales, Parts and Service 1-800-424-2411 Canadian Sales 1-888-442-7526 Canada or USA Parts/Service 1-800-427-6668

37-7/8"[962mm]

13-1/8"[333mm]

2-7/8"[73mm]

3-1/2"[89mm]

31-1/2"[800mm]

6" [152mm]

30-3/8"[772mm]

9-3/4"[248mm]

31-1/2"[800mm]

33-7/8"[860mm]

40-1/4"[1022mm]

34"[864mm]

1-1/4" N.P.T.[32mm]

GAS INLET

14-/12"[368mm]

WIDTH

INPUT SPECIFICATIONS MST17B/BT MST24B/BT MST34B/BT

Input 45,000BTU(13.2kW) 60,000BTU(17.6kW) 90,000BTU(26.4kw)

Inlet/Manifold Size 1‑1/4"NPT 1‑1/4"NPT 1‑1/4"NPT

INSTALLATION NOTES

Installation Clearances ¹ Entry Clearances Operating Pressure

Clearance:0”forInstallationinNon‑CombustibleSurroundingsOnly

Crated:39‑1/4"(997mm)Uncrated:34‑1/4"(870)

Natural:6"WC(15mbar)Propane:10"WC(25mbar)

PRODUCT Width:In(mm)

Depth:In(mm)

Shipping

Cu Ft Shipping Wt: (Lb/Kg)

MST17B 17(432) 38(965) 24 235/107

MST17BT 17(432) 38(965) 10 135/60

MST24B 24(612) 38(965) 30 330/150

MST24BT 24(612) 38(965) 16 230/105

MST34B 34(864) 38(965) 48 510/231

MST34BT 34(864) 38(965) 24 390/180

Master Series H

eavy Duty Range-M

atch Char-Broiler

Form#MST17B,24STB,34STB(12/07/11)

ElectricalcharacteristicsformodelswithSuffix‑E:120VACsinglephase60Hz,1amp6ft.(1.8m)NEMA5‑15Pcordandplugprovided.230VACexportdirectconnectsinglephase50Hz,1amp.Garland/U.S.Rangeproductsarenotapprovedorautho‑rizedforhomeorresidentialuse,butareintendedforcommercialapplicationsonly.Garland/U.S.Rangewillnotprovideservice,warranty,maintenanceorsupportofanykindotherthanincommercialapplications.

¹NOTE:Installationclearancereductionsareapplicableonlywherelocalcodespermit.Gasinputratingsshownhereareforinstallationsupto2,000ft.(610m)aboveseallevel.Specifyaltitudesover2,000ft.Pleasespecifygastypewhenordering.

Garland/US Range MST24B Item#:36


Vulcan Model: 60SC-10B Item #37


ITEM# 37 - RANGE, 60", 10 OPEN BURNERS / EXISTING (1 REQ'D)

Vulcan 60SC-10B

Endurance™ Restaurant Range, 60", gas, (10) 30,000 BTU burners with lift-off burner heads, (1)standard oven on left, (1) convection on right, stainless steel front, sides, back riser & high shelf, fullyMIG welded frame, 6" adjustable legs, 358,000 BTU/hr, CSA, NSF

<Existing>

Mfr Qty Model Spec

ACCESSORIES

Salamander Broiler, Gas, 36" range, wall orcounter mount, 66,000 BTU total with (6)11,000 BTU burners, with stainless steelradiants, infinite manual control, standing pilotignition system, trigger grip positive rackpositioning, stainless steel front, top and sides,3/4" top gas connection with regulator, CSA,NSF <Existing>

36SB1Vulcan


R E S T A U R A N T R A N G E S




F-45331 (6/11)

ENDURANCE GAS RESTAURANT RANGE10 OPEN BURNERS

60" WIDE GAS RANGE

SPECIFICATIONS

60” wide gas restaurant range, Vulcan Model No. 60SS-10B-N. Fully MIG welded aluminized steel frame for added durability. Stainless steel front, sides, backriser, highshelf and 6” adjustable legs. Extra deep crumb tray with welded corners. Ten 30,000 BTU/hr. open top burners with lift-off burner heads. Energy saving flashtube open burner ignition system (one pilot for every two burners) shrouded for reliability. Heavy duty cast grates, easy lift-off 12” x 12 1/2” in the front and 12” x 14 1/2” in the back to better accommodate stock pots or large pans. Grates have a built in aeration bowl for greater efficiency. Burner knobs are cool to the touch, high temperature material. Two ovens: left oven is 23,000 BTU/hr. bakers depth oven, measures 26 1/4”d x 20 1/4”w x 14”h. Right oven is 35,000 BTU/hr. bakers depth oven, measures 27"d x 26" 3/8"w x 14"h. Both ovens have porcelain bottoms and door panels. Oven thermostats adjusts from 250°F to 500°F with a low setting. Each oven is supplied with two racks, two rack guide sets, and four rack positions. Oven doors are heavy duty with an integrated door hingespring mechanism requiring no adjustment. 1” rear gas connections with rear manifold and pressure regulator. Total input 358,000 BTU/hr.

Exterior Dimensions: 34”d x 60”w x 58”h on 6” adjustable legs

60SS-10B-N 2 Standard Ovens / Natural Gas

60SS-10B-P 2 Standard Ovens / Propane

60SC-10B-N 1 Standard Oven / 1 Convection Oven Natural Gas

60SC-10B-P 1 Standard Oven / 1 Convection Oven Propane

STANDARD FEATURES

Fully MIG welded frame ■

Stainless steel front, sides, backriser, lift-off high shelf ■

6” stainless steel adjustable legs ■

Ten open top burners, each burner is 30,000 BTU/hr. ■

with lift-off burner heads

Shrouded flash tube pilot system (one pilot per ■

two burners)

Heavy duty cast grates, easy lift-off 12” x 12 1/2” in ■

front and 12” x 14 1/2” in the rear

Extra deep pull out crumb tray with welded corners ■

Left oven: 23,000 BTU/hr. baker’s depth oven cavity, ■

full size sheet pans (18" x 26") fit front to back only

Right oven: 35,000 BTU/hr. baker’s depth oven cavity, ■

full size sheet pans (18" x 26") fit front to back and side to side

Oven thermostats adjusts from 250°F to 500°F ■

Two oven racks and four rack positions for each oven ■

Right oven: 35,000 BTU/hr. convection oven in place ■

of standard oven 24”d x 26 3/8”w x 13 7/8”h (115v - 1 phase blower motor, 4 amp, 6’ cord and plug, includes three oven racks. Full size sheet pans only fit side-to-side in convection oven. Convection oven motor requires field attachment.

1" rear gas connection and pressure regulator ■

One year limited parts and labor warranty ■

ACCESSORIES (Packaged & Sold Separately)

Extra oven rack with rack guides

Casters (set of eight)

Leveling casters (set of eight)

Flanged feet (set of eight)

10" stainless steel stub back

Reinforced high shelf for mounting salamander broiler

Model 60SS-10B-N (shown with optional casters)

Vulcan 60SC-10B Item#:37





F-45331 (6/11)NOTE: In line with its policy to continually improve its products, Vulcan reserves the right to change materials and specifications without notice.

ENDURANCE GAS RESTAURANT RANGE10 OPEN BURNERS

60" WIDE GAS RANGE

INSTALLATION INSTRUCTIONS

Clearances5. Rear Sides Combustible 6” 10” Standard Oven Non-combustible 0” 0” Convection Oven Non-combustible Min. 4” 0”

For proper combustion, install equipment on adjustable 6. legs or casters provided with unit.

For proper combustion, install equipment on adjustable 7. legs or casters provided with unit. NOTE: In line with its policy to continually improve its product, Vulcan reserves the right to change materials and specifications without notice.

Specify type of gas when ordering. Specify altitude when above 2,000 feet.

A pressure regulator sized for this unit is included. 1. Natural gas 5.0” W.C., propane gas 10.0” W.C.

Gas line connecting to range must be 1” or larger. 2. Ifflexibleconnectorsareused,theinsidediameter must be 1” or larger.

An adequate ventilation system is required for commercial 3. cooking equipment. Information may be obtained by writing to the National Fire Protection Association, 1 Batterymarch Park, Quincy, MA 02269, www.NFPA.org. When writing, refer to NFPA No. 96.

These units are manufactured for installation in 4. accordance with ANSZ223.1A (latest edition), National Fuel Gas Code. Copies may be obtained from The American Gas Association, 400 N Capitol St. NW, Washington, DC 20001, www.AGA.org.

TOP CONFIGURATION

MODEL NUMBER DESCRIPTION

TOTAL INPUT

BTU / HRSHIPPING WEIGHT

LBS / KG

60SS-10B-N 2 Standard Ovens / 10 Burners / Natural Gas 358,000 890 / 404

60SS-10B-P 2 Standard Ovens / 10 Burners / Propane 358,000 890 / 404

60SC-10B-P 1 Standard Oven / 1 Convection Oven / 10 Burners / Natural Gas 358,000 950 / 431

60SC-10B-P 1 Standard Oven / 1 Convection Oven / 10 Burners / Propane 358,000 950 / 431

This appliance is manufactured for commercial use only and is not intended for home use.

Vulcan 60SC-10B Item#:37





F32547 (05/12)


36SB36" HEAVY DUTY GAS

SALAMANDER BROILER

Model 36SB

36SB Salamander Broiler

NOTE: 36SB may be used in conjunction with appropriate reinforced range back riser, wall mounted with optional brackets or counter mounted with optional 4" legs.

STANDARD FEATURES

■ Stainless steel front, top and sides.

■ Infinite adjustment temperature control.

■ Six 11,000 BTU/hr bar type burners with stainless steel radiants; 66,000 BTU/hr total input.

■ Standing pilot ignition system.

■ Chrome plated trigger grip control handle provides positive positioning of the broiling carriage. Heavy duty chrome plated broiling grid measures 271⁄2"w x 13"d.

■ Removable full width spillage pan.

■ 3⁄4" top gas connection and gas pressure regulator.

■ One year limited parts and labor warranty.

OPTIONS

Set of wall mount brackets.

Set of 4" legs with adjustable feet.

Stainless steel reinforced back riser for range mounting.SPECIFICATIONS

Gas salamander broiler, Vulcan-Hart Model No. 36SB. Stainless steel front, top and sides. Six 11,000 BTU/hr bar-type burners with stainless steel radiants; 66,000 BTU/hr total input. Infinite heat control valve. Pilot ignition system. Chrome plated trigger grip control handle provides positive positioning of the broiling carriage. Heavy duty chrome plated broiling grid measures 271⁄2"w x 13"d. Removable full width spillage pan. 3⁄4" top gas connection and gas pressure regulator.

Exterior Dimensions:36"w x 19"d x 175⁄8"h.

CSA design certified. NSF listed.

SPECIFY TYPE OF GAS WHEN ORDERING.SPECIFY ALTITUDE WHEN ABOVE 3,999 FT.

Vulcan 36SB Item#:37





F32547 (05/12)

36SB36" HEAVY DUTY GAS

SALAMANDER BROILER

INSTALLATION REQUIREMENTS:

NOTE: In line with its policy to continually improve its products, Vulcan reserves the right to change materials and specifications without notice.

1. A gas pressure regulator sized for this unit is included. Natural gas 5" W.C., Propane gas 10" W.C.

2. An adequate ventilation system is required for commercial cooking equipment. Information may be obtained by writing to the National Fire Protection Association, Batterymarch Park, Quincy, MA 02169. When writing refer to NFPA No. 96.

3. These units are manufactured for installation in accordance with National Fuel Gas Code, ANSI-Z223.1/NFPA #54 (latest edition). Copies may be obtained from The American Gas Association, Accredited Standards Committee Z223 @ 400N. Capital St. NW,

Washington, DC 20001, or the Secretary Standards Council, NFPA, 1 Batterymarch Park, Quincy, MA 02169-7471.

NOTE: In the Commonwealth of Massachusetts All gas appliances vented through a ventilation hood or exhaust

system equipped with a damper or with a power means of exhaust shall comply with 248 CMR.

4. Clearances: Combustible Non-Combustible Rear 0" 0" Sides 6" 0" Bottom 10" 4"

5. This appliance is manufactured for commercial installation only and is not intended for home use.

GAS CONNECTION: 3⁄4" (19 mm)

MODELMOUNTED

OVERINPUT

BTU/hr. WIDTH DEPTH HEIGHTAPPROX. SHIP. WT.

36SB 36" range 66,000 36" (914 mm) 19" (483 mm)

See Drawing

250 lbs./113 kg

36SB 48" range 66,000 *48" (1219 mm) 19" (483 mm) 275 lbs./125 kg

36SB 60" range 66,000 *60" (1524 mm) 19" (483 mm) 300 lbs./136 kg

*Width includes broiler and single deck plate shelf.

OPTIONAL COUNTER LEG

4"(102)

11⁄4"(32)

191⁄2"(496)

2"(51)

19"(483)

11⁄8"(29)

11⁄4"(32)36"

(914)20"

(508)

241⁄2"(622)

3⁄4" GAS CONNECTION

OPTIONAL WALL MOUNTBRACKET

21⁄4 " (57) AIR SPACE

Vulcan 36SB Item#:37


Vulcan Model: SB Item #38


ITEM# 38 - SALAMANDER BROILER / EXISTING (1 REQ'D)

Vulcan SB

Salamander Broiler, included in and part of 10-burner range (Item 37)

<Existing>


Vulcan Model: TK35 Item #39


ITEM# 39 - FRYER / EXISTING (1 REQ'D)

Vulcan TK35

Fryer

<Existing>


Vulcan TK35 Item#:39


Custom Model: EXHAUST HOOD Item #40


ITEM# 40 - EXHAUST HOOD / EXISTING (1 REQ'D)

Custom EXHAUST HOOD

Exhaust Hood

<Existing>


Custom Model: FSS Item #41


ITEM# 41 - FIRE SUPPRESSION SYSTEM / EXISTING (1 REQ'D)

Custom FSS

Fire Suppression System

<Existing>


Miscellaneous Model: MOP SINK Item #42


ITEM# 42 - MOP SINK / EXISTING (1 REQ'D)

Miscellaneous MOP SINK

Mop Sink

<Existing>


Eagle Group Model: US0824-16/3 Item #43


ITEM# 43 - MOP HOLDER / EXISTING (1 REQ'D)

Eagle Group US0824-16/3

Utility Shelf with Mop Hanger, 8" x 24", 16/304 stainless steel

<Existing>



EG20.02 Rev. 10/09


SheetNo.

EG20.02

Utility

Shelves


Short Form SpecificationsEagle Utility Shelf with Mop Hanger, model _______________.Constructed of 16/304 stainless steel. Standard 8˝ wide.Furnished with mop hangers and hooks for hanging clothes.

Design and Construction Features• 16 gauge type 304 stainless steel.• Mop hangers and hooks are riveted to front of shelf.• Available in 24˝, 36˝, and 48˝ (610, 914, and 1219mm)lengths.

• Standard width is 8˝ (203mm).



S.I.S. No.:

Utility ShelvesSpecification Sheet

MODELS:



#US0836-16/3

US0824-16/3US0836-16/3US0848-16/3

Eagle Group US0824-16/3 Item#:43




shelf shelfwidth length weight

model # in. mm in. mm lbs. kg

US0824-16/3 8˝ 203 24˝ 610 9 4.1US0836-16/3 8˝ 203 36˝ 914 11 5.0US0848-16/3 8˝ 203 48˝ 1218 13 5.9

CatalogSp

ecificationSh

eetN

o.EG

20.0

2U

tility

Shel

ves


S.I.S. No.:

Rev. 10/09


Utility Shelves



SIDE VIEW

FRONT VIEW

Eagle Group US0824-16/3 Item#:43


Eagle Group Model: CM84PR Item #44


ITEM# 44 - POT RACK (1 REQ'D)

Eagle Group CM84PR

Pot Rack, Ceiling Hung, triple bar design with ceiling hangers, 76"L, with stainless steel double-prongedsliding hooks, constructed of 3/16" x 2" stainless steel, NSF

Mfr Qty Model Spec

ACCESSORIES



wall mounted


EG10.12 Rev. 01/12


EG10.12

Racks




S.I.S. No.:

Specification Sheet




RacksMODELS:

Options / AccessoriesAdditional sliding hooksAll-welded construction12˝-wide adjustable shelves (for Table Mounted Racks)

Short Form SpecificationsEagle Table Mounted Pot/Pan Rack, model ______________.Constructed of 3⁄16˝ x 2˝ (aluminum or stainless steel) flat bar,bolted together. Triple bar construction, furnished with onestainless steel double prong sliding pot hook every 12˝. 15⁄8˝ O.D. stainless steel tubular supports extend through tableand are secured to adjustable undershelf. Available withoptional 12˝ wide 16/304 stainless steel shelf. Eagle Ceiling Mounted Pot/Pan Rack, model ______________.Constructed of 3⁄16˝ x 2˝ (aluminum or stainless steel) flat bar,bolted together. Triple bar construction, furnished with onestainless steel double prong sliding pot hook every 12˝.Provided with plated chain hangars for ceiling suspension.Eagle Wall Mounted Pot/Pan Rack, model _______________.Constructed of 3⁄16˝ x 2˝ (aluminum or stainless steel) flat barbolted together. Furnished with one stainless steel doubleprong sliding pot hook every 12˝, and provided with stainlesssteel mounting brackets.

TM36*TM48*TM60*TM72*TM84*TM96*TM108*TM120*TM132*TM144*

CM36*CM48*CM60*CM72*CM84*CM96*CM108*CM120*CM132*CM144*

WM36*WM48*WM60*WM72*WM84*WM96*WM108*WM120*WM132*WM144*

Ceiling mounted (non-NSF)• Racks are triple-bar construction. • Supported with plated chain hangers supplied. • Available in stainless steel or aluminum. • Provided with double-pronged pot hooks.

Wall Mounted• Racks are double-bar construction. • Supplied with die-formed stainless steel brackets. • Available in stainless steel or aluminum. • Provided with double-pronged pot hooks.

Table Mounted• Racks are triple-bar construction. • Front-to-back adjustable crossbracing, plus adjustable

undershelf. • 15⁄8˝ (41mm) tubular stainless steel supports extend

through tabletop and are secured to adjustable undershelf.Units 108˝ (2743mm) and longer have three supports.

• Provided with double-pronged pot hooks. • Available in stainless steel or alu mi num.

ceiling mounted (non-NSF)

* See charts on back for full model numbers.

table mounted

Eagle Group CM84PR Item#:44




Cata

log

Spec

ifica

tion

Shee

t No.

EG10

.12

Rac

ksItem No.:


Rev. 01/12




Table Mounted Racks

Wall Mounted Racks

Ceiling Mounted Racks

t ABl e

t ABl e

20˝ 508mm

20˝508mm

94˝ 2388mm

12˝ 305mm

12˝305mm

5˝127mm

16˝ 406mm

l en g t h

24˝ 610mmCh AIn

91⁄8˝ 232mm

20˝ 508mm

RACKl en g t h

341⁄2˝ 876mm

18˝457mm

18˝ 457mm

43⁄8˝ 111mm

l en g t h

ALUMINUM STAINLESS STEEL rackweight weight length

model # lbs. kg model # lbs. kg in. mmCM36APR 28 12.7 CM36PR 41 18.6 28˝ 711CM48APR 32 14.5 CM48PR 48 21.8 40˝ 1016CM60APR 36 16.3 CM60PR 54 24.5 52˝ 1321CM72APR 40 18.1 CM72PR 60 27.2 64˝ 1626CM84APR 44 20.0 CM84PR 67 30.4 76˝ 1930CM96APR 48 21.8 CM96PR 74 33.6 88˝ 2235CM108APR 53 24.0 CM108PR 81 36.7 100˝ 2540CM120APR 58 26.3 CM120PR 87 39.5 112˝ 2845CM132APR 63 28.6 CM132PR 94 42.6 124˝ 3150CM144APR 68 30.8 CM144PR 101 45.8 136˝ 3454

ALUMINUM STAINLESS STEEL rack fits tableweight weight length length

model # lbs. kg model # lbs. kg in. mm in. mmTM36APR 38 17.2 TM36PR 50 22.7 28˝ 711 36˝ 914TM48APR 42 19.1 TM48PR 57 25.9 40˝ 1016 48˝ 1219TM60APR 46 20.9 TM60PR 64 29.0 52˝ 1321 60˝ 1524TM72APR 50 22.7 TM72PR 70 31.8 64˝ 1626 72˝ 1829TM84APR 54 24.5 TM84PR 77 34.9 76˝ 1930 84˝ 2134TM96APR 58 26.3 TM96PR 83 37.6 88˝ 2235 96˝ 2438TM108APR* 62 28.1 TM108PR* 89 40.4 100˝ 2540 108˝ 2743TM120APR* 66 29.9 TM120PR* 95 43.1 112˝ 2845 120˝ 3048TM132APR* 71 32.2 TM132PR* 102 46.3 124˝ 3150 132˝ 3353TM144APR* 76 34.5 TM144PR* 109 49.4 136˝ 3454 144˝ 3658

* These racks include center tubular support.

ALUMINUM STAINLESS STEEL rackweight weight length

model # lbs. kg model # lbs. kg in. mmWM36APR 13 5.8 WM36PR 18 8.2 36˝ 914WM48APR 15 6.8 WM48PR 22 10.0 48˝ 1219WM60APR 17 7.7 WM60PR 26 11.8 60˝ 1524WM72APR 19 8.6 WM72PR 29 13.2 72˝ 1829WM84APR 21 9.5 WM84PR 33 15.0 84˝ 2134WM96APR 23 10.4 WM96PR 37 16.8 96˝ 2438WM108APR 25 11.3 WM108PR 41 18.6 108˝ 2743WM120APR 28 12.7 WM120PR 45 20.4 120˝ 3048WM132APR 31 14.1 WM132PR 50 22.7 132˝ 3353WM144APR 34 15.4 WM144PR 55 24.9 144˝ 3658

Eagle Group CM84PR Item#:44


Item #45


ITEM# 45 -

<Spare>


American Creative Solutions Model: CUSTOM Item #46



American Creative Solutions CUSTOM

Stainless Steel Wall Cabinets, to be in three sections and out of stainless steel cladconstruction and to be approximately 8'-2-1/2" x 1-0" x 3'-6" high + 2'-8" x 1-0" x 2'-8" high + 7'-6" x 1'-0" x 2'-8 high. 3'-6" high cabinets to have (2) glass shelves with glass insert doors on front of cabinet.Both sets of 2'-8 high cabinets to have (1) glass shelf with glass insert doors on front.Note: Blocking in wall by others. Electrical by others.

Mfr Qty Model Spec

ACCESSORIES





ITEM# 47 - SERVICE COUNTER W/ CABINET BASE (1 REQ'D)


Stainless Steel Counter Solutions - to be approximately 8'-2-1/2" x 2'-0" x 2'10-1/2" high. To be stainlesssteel clad construction with doors and shelves on base asneeded. To include stainless steel top, 6" legs and adjustable bullet feet with removable stainless steeltoe kick.Note: Plumbing and electrical by others

Mfr Qty Model Spec

ACCESSORIES





ITEM# 48 - MILLWORK COUNTER WITH SINK (1 REQ'D)

Eagle Group CUSTOM

Stainless Steel Counter - to be approximately 7'-6" x 2'-0" x 2'-10-1/2" high. To bestainless steel clad construction with doors and shelves on base as needed. To include stainless steeltop, 6" legs, adjustable bullet feet with removable stainless steel toe kick and (1) 28" x 16" stainelsssteel sink.

Mfr Qty Model Spec

ACCESSORIES

Mixing Faucet, deck mount, swivel gooseneck,11-3/4"H - deck to top of gooseneck, 7-1/2" tipof nozzle to deck, lever handles, 4" center with1/2" IPS eccentric flanged female inlets

B-03251T&S Brass


DIRECTSIZE

COLDSIZE

INDIRECTSIZE

HOTSIZE

HOTGPH

CONDENSERINLET SIZE

FILTEREDSIZE


WATER WASTE

HOTAFF

COLDAFF

FILTEREDAFF

1/2" 1-1/2"1/2"1 1


9 1/2"[241mm]

[140mm]5 1/2"13 9/16"

[343mm]

Mounting Surface

Adjustable from3 3/4" to 4 1/4"

[95mm to 108mm]

Note: Rough-In RequirementØ 1 1/2" [38mm] HolesØ 1 1/4" [32mm] Minimum

Eterna Cartridges &Lever Handles w/ Color Coded Indexes

4" c/c[102mm]

Travelers Rest, SC: 800-476-4103

Sheet: 1 of


Scale:

Model No.

Item No.


REG. #A2601ISO #9001

02/17/11

Simi Valley, CA: 800-423-0150 Fax: 864-834-3518 www.tsbrass.com

JHBDHLApprovedDrawn Checked

1/2" NPT Female Inlets

4" c/c Double Pantry Faucet, Eterna Cartridges, 133X SwivelGooseneck w/ B-PT Stream Regulator Outlet, Lever Handles & Gooseneck w/ B-PT Stream Regulator Outlet, Lever Handles &


Gooseneck w/ B-PT Stream Regulator Outlet, Lever Handles & JRM


4" c/c Double Pantry Faucet, Eterna Cartridges, 133X Swivel


B-0325

4" c/c Double Pantry Faucet, Eterna Cartridges, 133X SwivelDate:

1:4


Job Name__________________________Date_________



Contractor_______________________________________


2

Swivel Gooseneck w/ B-PTStream Regulator Outlet

133X

Ø 2" [51mm]Flanges w/1/2" NPTFemale Inlets




1 B-PT Stream Regulator Assembly2 001048-45 Nozzle Tip Washer3 133X Swivel Gooseneck Assembly4 009538-45 Swivel Washer5 011429-45 Swivel Sleeves (2)6 001074-45 O-Ring7 001661-45 Red Index-HW8 000922-45 Lever Handle Screw9 001660-45 Blue Index-CW

10 005959-40 Spindle Asm, Eterna "Cold"11 001019-45 Coupling Nut Washer 12 00AA Flange Assembly13 005960-40 Spindle Asm, Eterna "Hot"14 001638-45 Lever Handle

12

2

6

4

8

913

10

11

1

14

7

5

3

of2Sheet:

Model No.

Item No.



REG. #A2601ISO #9001

B-0325



ApprovedDrawn

2

www.tsbrass.com

Checked

Date:1/2" NPT Female Inlets

JRM

02/17/11Scale:


DHL JHB4" c/c Double Pantry Faucet, Eterna Cartridges, 133X SwivelGooseneck w/ B-PT Stream Regulator Outlet, Lever Handles &

NTS



Item #49


ITEM# 49 -

<Spare>


ACP Model: RCS10DS Item #50


ITEM# 50 - MICROWAVE OVEN (1 REQ'D)

ACP RCS10DS

Amana® Commercial Microwave Oven, 1000 watts, medium volume, stainless steel exterior & interior,6 min. dial timer, 1 power level, non-removable air filter, side hinged door with glass window, limited 3-yr warranty, 120v/60/1-ph, 13.0 amps, 15 MCA, 5' cord & NEMA 5-15P

Mfr Qty Model Spec

ACCESSORIES

APPROVED ALTERNATES: PANASONIC, SHARP


ELECTRICAL

PHASE AFF

13 151.555-15P120 60 Cord & Plug11


225 49th Ave Dr. SW Cedar Rapids, IA 52404 | 800-233-2366 | 319-368-8120 | Fax: 319-368-8198 | www.acpsolutions.com

Item #:

Project #:

AIA

File #:Specification #:

Medium VolumeAmana Commercial Microwave Model RCS10DS

Model RCS10DS shown

Power Output

l 1000 watts of power.

l Full power only for simple operation.

Easy to Use

l User friendly six minute dial timer lights up for at-a-glance

monitoring.

l Timer must be manually reset to zero if door is opened during

heating.

l See-through door and lighted interior for monitoring without opening the door.

l 1.2 cubic ft. (34 liter) capacity accommodates a 14” (356 mm) platter, prepackaged foods and single servings.

l Stackable to save valuable counter space.

Easy to Maintain

l Stainless steel exterior and interior for easy cleaning and a commercial look.

l Constructed to withstand the foodservice environment.

l Non-removable air filter protects oven components.

l Backed by the ACP, Inc. 24/7 ComServ Support Center, 866-426-2621.

l UL and ETL Listed.

Medium VolumeThis category of microwave is ideal for...

Applications: - Coffee shops - Ethnic restaurants - Concessions - Dessert stations All ACP, Inc. commercial ovens are backed by our Culinary Center. Call us with any question regarding food preparation,menu development and cooking times.866-426-2621.

Amana® is a Registered trademark of Maytag Corporation. Brand used under license.

ACP RCS10DS Item#:50


Form # ACRR0967 ACP commitment to quality may mean a change in specification without notice. Product of the U.S.A. © 2012 ACP Inc.™ Printed in the U.S.A.

AIA

File

#:

Spec

ifica

tion

#:

225 49th Ave. Dr. SW Cedar Rapids, IA 52404 U.S.A. | 800-233-2366 | 319-368-8120 | Fax: 319-368-8198 | www.acpsolutions.com

Amana Commercial Microwave Model RCS10DS | Medium Volume

SpecificationsModel RCS10DS UPC Code 728028020731Configuration CountertopControl System Dial Max. Cooking Time 6:00 Power Levels 1Time Entry Option YesMicrowave Distribution Rotating antenna, topMagnetron 1Stackable YesStage Cooking 1Interior Light YesDoor Handle Grab & GoSignal End of cycleExterior Dimensions H 13 3⁄4” (349) W 22” (559) D*19” (483) Cavity Dimensions H 8 1⁄2” (216) W 14 1⁄2” (368) D 15” (381)Door Depth 32 3⁄4” (832), 90o+ door openUsable Cavity Space 1.2 cubic ft. (34 liter) Exterior Finish Stainless steel Interior Finish Stainless steel Power Consumption 1550 W, 13 APower Output** 1000 W** Microwave Power Source 120V, 60 Hz, 15 A single phase

Plug Configuration / Cord NEMA 5-15 5 ft. (1.5m)

Frequency 2450 MHzProduct Weight 41 lbs. (18.6 kg.)Ship weight (approx.) 48 lbs. (21.8 kg.)Shipping Carton Size H 17 1⁄4” (431) W 25 1⁄2” (660) D 20 1⁄2” (508)UPS Shippable Yes

SpecificationsCommercial microwave shall have a user-friendly 6 minute dial timer with illuminated digits and an end of cycle audi-ble signal. Timer shall not automatically reset if the door is opened during heating. There shall be a single power level and cooking stage. Microwave output shall be 1000 watts distributed by one magnetron with a rotating top antenna to provide superior even heating throughout the cavity. Durable door shall have a tempered glass window and a grab and go handle with a 90o + opening for easy access. An interior light shall facilitate monitoring without opening the door. The large 1.2 cubic ft. (34 liter) cavity shall ac-commodate a 14” (356 mm) platter. Interior ceramic shelf shall be sealed and recessed on oven bottom to reduce plate-to-shelf edge impact. Oven shall have a stainless steel exterior and interior and be stackable to save counter and shelf space. The air filter shall be permanently affixed to the front of the oven. Microwave oven shall comply with standards set by the U.S Department of Health and Human Services, UL for safety and ETL for sanitation.

WarrantyWarranty Certificate for this product can be found on the ACP, Inc. website at:

www.acpsolutions.com/warranty

ServiceAll products are backed by the ACP, Inc. 24/7 ComServ Support Center.

Measurements in ( ) are millimeters* Includes handle ** IEC 60705 Tested

Installation clearance: 2” all sides Drawings available from KCL CADlog - [email protected]

ACP RCS10DS Item#:50


Bunn-O-Matic Model: TB3-0009 Item #51


ITEM# 51 - TEA BREWER / NIKEC (1 REQ'D)

Bunn-O-Matic TB3-0009

36700.0009 TB3 Iced Tea Brewer with Portable Server, 3-gallon capacity single brewer, 16.3gallon/hour, SplashGard® funnel, adjustable steep time, (dispensers sold separately), 120v/60/1-ph,1730w, 14.4amps, NEMA 5-15P, cord attached, UL, NSF

<By Purveyor>

Mfr Qty Model Spec

ACCESSORIES

33000.0000 TDS-3 Iced Tea/Coffee Dispenser,cylinder style, 3 gallon capacity (11.4 litres),sump dispense valve, stainless steel lid, faucethandles are labeled sweetened &unsweetened, side handles, NSF <ByPurveyor>

TDS-3-00001Bunn-O-Matic


ELECTRICAL

PHASE AFF

14.4 1.735-15P120 60 Cord & Plug11


MECHANICAL CONNECTIONS MUST BE VERIFIED W/ PURVEYOR

DIRECTSIZE

COLDSIZE

INDIRECTSIZE

HOTSIZE

HOTGPH

CONDENSERINLET SIZE

FILTEREDSIZE


WATER WASTE

HOTAFF

COLDAFF

FILTEREDAFF

1/4"1 1

PLUMBING 1 REMARKS

MECHANICAL CONNECTIONS MUST BE VERIFIED W/ PURVEYOR, PLUMBER TO PROVIDE/INSTALLBACK FLOW PREVENTOR IN ACCORDANCE W/ LOCAL HEALTH DEPARTMENT CODE.


Features

Related Products

Item#

Project

Date

For current specification sheets and other information, go to www.bunn.com.

TDO-4 – Tea Dispenser Product No. : 34100.0002capacity: 4 gallonsWeight: 13 lbs. Dimensions:19” H x 10.7” W x 13.7” D48.26 cm H x 27.18 cm W x 34.8 cm D

TD4T – Tea Dispenser Product No. : 03250.0004capacity: 4 gallonsWeight: 14 lbs. Dimensions: 21.9” H x 9” W x 13” D55.63 cm H x 22.86 cm W x 33.02 cm D

TDS-3.0 – Tea Dispenser Product No. : 33000.0000capacity: 3.0 gallonsWeight: 9.4 lbs.Dimensions: 19”H x 9.8”W x 12.8”D48.3cm H x 24.9cm W x 32.5cm D

Translucent Pouchpack Tea Funnel Quick dispense, tU-3QProduct No. : 35282.0001Standard dispense, tU-3Product No. : 35282.0002

2/11 B1

Iced Tea Brewer• Brews16.3to26.7gallons(61.7to101.1litres)perhourfromrealtealeaves.• Brewsdirectlyintoanystyleportableserver.• Meetyourvolumeneeds;brew3gallons(11.36litres)oficedteaatatime.• Quickbrew(Q)modelsavailableforshorterbrewingcycles.• SplashGard®funneldeflectshotliquidsawayfromthehand.•TB3hasadjustablesteeptimeformorecontroloverflavorextraction.• Internationalelectricalconfigurationsavailable.

Sweetener Model Features• Separateinletforsweetener-useexistingCO2systemsorexternal3rd

partypumpforsweetenerdelivery.

Model TB3Q with TDO-4 Dispenser(TDO-4 sold separately)

Dimensions(29”trunk):34”Hx11.6”Wx22”D(86.4cm H x 29.5cm W x 58.4cm D)

Dimensions(25.75”trunk):31”Hx11.6”Wx22”D(78.7cm H x 29.5cm W x 58.4cm D)

Model Agency Listing

TB3QTB3

3 Gallon Iced Tea Brewer with Portable Server

Easy Clear® EQHP-Tea Product No. : 39000.0007

Easy Clear® EQHP-TEACRTGreplacement cartridge Product No. : 39000.1007

Single/Dual Filter Pack Product No. : 20100.0000Packed per case: 500Dimensions: 51⁄4"Basex33⁄4"Sidewall13.34cmBasex9.52cmSidewall

UL LISTED

UL LISTED

TB3/TB3Q Tea Dispensers

25.75" trunk TD4, TDS-3, TDO-4

29" trunk TD4,TD4T, TDS-3, TDS-3.5, TDO-4, TDO-5, TDO-N-3.5, TDO-N-4

Bunn-O-Matic TB3-0009 Item#:51


BUNN®practicescontinuousproductresearchandimprovement.Wereservetherighttochangespecificationsandproductdesignwithoutnotice.Suchrevisionsdonotentitlethebuyertocorrespondingchanges,improvements,additionsorreplacementsforpreviouslypurchasedequipment.

Alldimensionsshownininches.

Dimensions & Specifications

Bunn-O-Matic®Corporation-1400StevensonDriveSpringfield,Illinois62703•800-637-8606•217-529-6601•Fax217-529-6644•www.bunn.com

5.34

ACCESS PANEL FOR Q MODELS ONLY

34.0 - 29” Trunk30.9 - 25.75” Trunk

23.0 - 29” Trunk19.8 - 25.75” Trunk

Model Product # Volts Amps Tank Heater Total Brewing Cubic Shipping Cord Watts Watts Capacity Measure Weight Attached

TB3ƒ 36700.0009 120 14.4 1680 1730 16.3gal./hr. 8.8ft3 43 lbs. Yes†

TB3Qƒ 36700.0013 120 14.4 1680 1730 26.7gal./hr. 8.8ft3 42 lbs. Yes†

TB3 36700.0030 120 14.4 1680 1730 16.3gal./hr. 7.9ft3 42 lbs. Yes†

TB3Qƒw/TD4T 36700.0041 120 14.4 1680 1730 26.7gal./hr. 10ft3 55 lbs. Yes†

TB3ƒ Sweetner 36700.0043 120 14.4 1680 1730 16.3gal./hr. 8.8ft3 44 lbs. Yes†

TB3ƒµ 36700.0055 120 14.4 1680 1730 16.3gal./hr. 8.8ft3 42 lbs. Yes†

TB3Q# 36700.0059 120 14.4 1680 1730 26.7gal./hr. 8.8ft3 41 lbs. Yes† TB3Q*ƒ 36700.0076 120 14.4 1680 1730 26.7gal./hr. 8.8ft3 42 lbs. Yes†

TB3Qƒw/TD4T 36700.0080 120 14.4 1680 1730 26.7gal./hr. 10ft3 55 lbs. Yes†

w/6footcord

*Quick disconnect. ƒ29” trunk height µHas ready light †Power cord (NEMA 5-15P) 15 Amp-120V machine only #90 oz concentrate

Electrical: Modelsrequire2-wiresplusgroundserviceratedat120V,singlephase,60Hz.

Plumbing: 20-90psi(138-621kPa).Machinesuppliedwith 1⁄4"ODmaleflarefitting.Requiresminimum1GPMwaterflow.

2/10 © Bunn-O-Matic Corporation

Bunn-O-Matic TB3-0009 Item#:51


Features

Related Products

Item#

Project

Date


9/10 B7

Iced Tea/Coffee Dispensers• Dispensersavailablein3,3.5,4,and5gallon

(11.4,13.2,15.1and18.9litre)capacities.• Sumpdispensevalveassurescompletedispensingoftea.• tDS-3,tDS-3.5andtDS-5modelshavestainlesslid.• tDo-4andtDo-5modelshaveplasticlidandovalshape.• Faucethandlesarelabeledsweetenedandunsweetened.Sidehandlesaremounted

offsetforcloserside-by-sidepositioning.*

* Some TDS-3 and TDS-5 models in stock may not have these features.


tDS-3tDS-3.5tDS-5IcD-3tDo-4tDo-5

3, 3.5, 4, 5 Gallon Cylinder StyleIced Tea/Coffee Dispensers

TDS-3.5Dimensions:

20.4”Hx9.8”Wx12.8”D(51.8cm H x 24.9cm W x 32.5cm D)

TDS-3Dimensions:

19”Hx9.8”Wx12.8”D(48.3cm H x 24.9cm W x 32.5cm D)

TDS-5Dimensions:

25.6”Hx9.8”Wx14.8”D(65cm H x 37.8cm W x 37.6cm D)

TDO-5Dimensions:


TDO-4Dimensions:


ICD-3 Iced Coffee DispenserProductNo.:33000.0002Dimensions:20.6”Hx9.8”Wx14”D52.3cmHx37.8cmWx35.6cmD

TDO Brew-Through LidProductNo.:34093.0001

Remote StandProductNo.:37675.0001

Pinch Tube Faucet KitProductNo.:40363.1000

TDO Lid RetainerProductNo.:35136.0001Dimensions:5.25”Hx11”Wx10.2”D13.3cmHx27.9cmWx10.2cmD

Drip TrayProductNo.:38029.1000(for TDO-4 and TDO-5)

Bunn-O-Matic TDS-3-0000 Item#:51



alldimensionsshownininches.


Bunn-o-matic®corporation-1400StevensonDriveSpringfield,Illinois62703•800-637-8606•217-529-6601•Fax217-529-6644•www.bunn.com

Model Product # Capacity Handles Cubic Measure Shipping Weight

tDS-3 33000.0000 3gal/11.4litres Side 2.2ft3 9.4lbs.tDS-3.5 33000.0008 3.5gal/13.2litres Side 2.6ft3 10lbs.tDS-5 33000.0001 5gal/18.9litres Side 2.9ft3 12lbs.IcD-3 33000.0002 3gal/11.4litres Side 2.2ft3 10lbs.tDo-4(solidlid) 34100.0000 4gal/15.1litres Side 2.1ft3 12lbs.tDo-4(brew-throughlid) 34100.0002 4gal/15.1litres Side 2.1ft3 12lbs.tDo-4(solidlid,pinchtubefaucet*) 34100.0012 4gal/15.1litres Side 2.1ft3 12lbs.tDo-5(solidlid) 34100.0001 5gal/18.9litres Side 2.4ft3 14lbs.tDo-5(brew-throughlid) 34100.0003 5gal/18.9litres Side 2.4ft3 14lbs.* Pinch tube faucet requires bag liner for proper operation.

tDS-3/IcD-3 tDS-5

tDo-4 tDo-5

(10.65)LID

(9.80)RSVR.

(12.75)RSVR.

(13.65)LID

(19.00)RSVR.

(8.125)

1.90

.50

(10.65)LID

(9.80)RSVR.

(12.75)RSVR.

(13.65)LID

(22.125)RSVR.

(8.125)

1.90

.50

tDS-3.5


Bunn-O-Matic TDS-3-0000 Item#:51






Stainless Steel Wall Cabinets - to be stainless steel clad construction and to be approximately 7'-6" x 1'-0" x 2'-8 high. Cabinet to be (3) 2'-6" sections and to have (1) glass shelf with glass insert doors on frontof each cabinet.

Stainless Steel Wall Cabinets - to be stainless steel clad construction and to be approximately 3'-0" x 1'-0" x 2'-8 high. Cabinet to have (1) glass shelf with glass insert doors on front of each cabinet.Note: Blocking in wall by others. Electrical by others.

Mfr Qty Model Spec

ACCESSORIES

PROVIDE SHP DRAWINGS FOR REVIEW ANDAPPROVAL


Bunn-O-Matic Model: CWTF35-3-0253 Item #53


ITEM# 53 - COFFEE BREWER / NIKEC (1 REQ'D)

Bunn-O-Matic CWTF35-3-0253

12950.0253 CWTF35-3 Coffee Brewer, automatic, with 1 lower and 2 upper warmers, brews 7.5 gallonsper hour, hot water faucet, plastic funnel, pourover feature, stainless decor, 120/208-240v/60/1-ph,17.1 amps, 3850 watts, UL, NSF

<By Purveyor>

Mfr Qty Model Spec

ACCESSORIES

06100.0106 Easy Pour® Coffee Decanter, 64oz., drip-proof, fast-pour-lip, black handle, 6pack <By Purveyor>

EASYPOUR-01061 pkBunn-O-Matic

06101.0103 Easy Pour® Coffee Decanter, 64oz., drip-proof, fast-pour-lip, orange handle, 3-pack <By Purveyor>

EASYPOUR-OR-0103

1 pkBunn-O-Matic


ELECTRICAL

PHASE AFF

17.1 3.85120/208 60 Direct11


MECHANICAL CONNECTIONS MUST BE VERIFIED W/ PURVEYOR

DIRECTSIZE

COLDSIZE

INDIRECTSIZE

HOTSIZE

HOTGPH

CONDENSERINLET SIZE

FILTEREDSIZE


WATER WASTE

HOTAFF

COLDAFF

FILTEREDAFF

1/4"1 1

PLUMBING 1 REMARKS

MECHANICAL CONNECTIONS MUST BE VERIFIED W/ PURVEYOR, PLUMBER TO PROVIDE/INSTALLBACK FLOW PREVENTOR IN ACCORDANCE W/ LOCAL HEALTH DEPARTMENT CODE.


Features

Related Products

Item#

Project

Date


Patents Apply 3/09 A1.1

Easy Clear® EQ-17-TL Product No. : 30200.1000 Dimensions: 127⁄16" H x 21⁄2" W x 3" D31.6 cm H x 6.35 cm W x 7.62 cm D

Easy Clear® ED-17-TL Product No. : 30201.1001 Dimensions: 81⁄4" H x 25⁄16" Dia. 20.95 cm H x 5.87 cm Dia.

12 Cup Automatic Coffee Brewer • Brews3.8to7.5gallons(14.4to28.4litres)ofperfectcoffeeperhour.• Modelisspace-saving8.5"(21.6cm)wide.• Allstainlesssteelconstruction.• HotwaterfaucetexceptonCWTmodels(seeback).• Pouroverfeatureonallmodels.• SplashGard®funneldeflectshotliquidsawayfromthehand.• Internationalelectricalconfigurationsavailable.

Model CWTF15–3(decanters sold separately)

Dimensions: 18.9” H x 8.5” W x 17.8” D(48cm H x 21.6cm W x 45.2cm D)

Easy Pour® black decanter Product No. : 06100.0101Quantity:1(also packaged in

quantities of 2, 3, 6, 12, & 24)

Easy Pour® orange decanter(fordecaf) Product No. : 06101.0101Quantity:1 (also packaged in quantities of 2, 3, 6, 12, & 24)

1GPR SS Portable Server on an RWS1 Warmer 1GPRProductNo.:12487.0001* RWS1ProductNo.:12203.0010*Also available with side handles or black decor.

Paper Filter Pack Product No. : 20115.0000Packedpercase:1,000Dimensions: 41⁄4” Basex23⁄4”Sidewall 10.8 cm Basex6.98cm Sidewall


cWtF15cWtF20cWtF35

UL LISTED

UL LISTED

UL LISTED

12 Cup Automatic Coffee Brewer


Dimensions: 18.9” H x 8.5” W x 17.8” D(48cm H x 21.6cm W x 45.2cm D)


Dimensions: 16.8” H x 8.5” W x 17.8” D(42.7cm H x 21.6cm W x 45.2cm D)

Bunn-O-Matic CWTF35-3-0253 Item#:53






8.50

20.65

Model Product # Volts Amps Tank Heater Total Brewing Cu. Shipping Cord Watts Watts Capacity Ft. Weight Attached

CWTF15-1 12950.0293 120 12.3 1320 1470 3.8gal./hr. 3.9 27lbs. YesCWTF15–2 12950.0211 120 13 1320 1570 3.8gal./hr. 3.9 33lbs. Yes CWTF15–3 12950.0213 120 14 1320 1670 3.8gal./hr. 3.9 33lbs. Yes CWTF15–3 12950.0217 120 13.9 1320 1670 3.8gal./hr. 3.9 34lbs. Yes CWTF20–3 12950.0283 120 17.9 1800 2150 5.1gal./hr. 3.9 34lbs. No CWTF35–3 12950.0253 120/208-240 17.1* 3500 3850 7.5gal./hr. 3.9 33lbs. No CWTF35–3 12950.0261 120/208-240 17.1* 3500 3850 7.5gal./hr. 3.9 34lbs. NoCWT15 12950.0356 120 13.9 1320 1670 3.8gal./hr. 3.9 30lbs. YesCWT20 12950.0291 120 17.9 1800 2150 5.1gal./hr. 3.9 30lbs. NoCWT35 12950.0292 120/240 17.1 3500 3850 7.5gal./hr. 3.9 30lbs. No*17.1 Amps @120/240 VoltsBrewing capacity: based upon incoming water temp of 60ºF (140ºF rise) per 1/2 gallon brew time of 4 minutes.Models listed as 120/208V or 120/240V must be connected to 208V or 240V electrical service respectively. Please refer to the installation manual.

Electrical: Model15requires2-wiresplusgroundservicerated120V,singlephase,60Hz. Model20requires2-wiresplusgroundservicerated120V,singlephase,60Hz. Model35requires3-wiresplusgroundservicerated120/208or120/240V,singlephase,60Hz.

Plumbing: 20-90psi(138-621kPa).Machinesuppliedwith 1⁄4"maleflarefitting.


Bunn-O-Matic CWTF35-3-0253 Item#:53


Features

Related Products

Item#

Project

Date


5/11 A1.15

WS2-Warmer with auxilary outlet Product No: 12882.0004 s/s decor 12882.0006 black decor6” H x 71⁄2” W x 174⁄5” D15.24cm H x 19.05cm W x 45.21cm Dtwo position warmer for S, St & StF brewers.

Easy Pour® Coffee Decanters• Containerandhandlecorearemoldedassturdy,extra-strength,one-piece

constructionforlongestlife.• Clear,high-impact-resistantmaterialcomplieswithFDAregulationsforfood

contact.• Baseishighqualitystainlesssteel.• Drip-proof,fast-pourlip–anexclusiveBUNNdesigntoassureconvenient

serving.Fast,cleanpouringfromfrontoreitherside.

WL2-Low profile warmer Product No: 11402.0001 s/s decor 11402.0006 black decor51⁄5” H x 8” W x 18” D13.21cm H x 20.32cm W x 45.72cm Dtwo position warmer for c, cW, VP17, etc. brewers.

WX1-warmer Product No. : 06450.0004one position warmer

WX2-warmer Product No. : 06310.0004two position warmer

BCW-Auxiliary warmer Product No. : 04875.0003one position warmerforhomeuse.

Coffee Decantersand Warmers


WS2 WarmerWL2 WarmerWX1 WarmerWX2 WarmerBCWWarmer

UL LISTED

Regular and DecafEasy Pour® Decanters

Regular and Decaf Glass Decanters

More Quality Decanters

NCD DecantersStainless Steel Decanters

UL LISTED

UL LISTED

UL LISTED

UL LISTED

Bunn-O-Matic EASYPOUR-0106 Item#:53






Model Product # Cu. Ft. Shipping Weight

EasyPour®blackhandle,64oz.,caseof1 06100.0101 .3 1lb.(0.5kg) EasyPour®blackhandle,64oz.,caseof2 06100.0102 .6 2lbs.(0.9kg) EasyPour®blackhandle,64oz.,caseof3 06100.0103 .8 3lbs.(1.4kg) EasyPour®blackhandle,64oz.,caseof6 06100.0106 1.5 6lbs.(2.7kg) EasyPour®blackhandle,64oz.,caseof12 06100.0112 3.0 12lbs.(5.5kg) EasyPour®blackhandle,64oz.,caseof24 06100.0124 5.8 23lbs.(10.4kg) EasyPour®blackhandle,64oz.,6each,caseof1 06100.0156 1.8 8lbs.(3.6kg)EasyPour®orangehandle,64oz.,caseof1 06101.0101 .3 1lb.(0.5kg) EasyPour®orangehandle,64oz.,caseof2 06101.0102 .6 2lbs.(0.9kg) EasyPour®orangehandle,64oz.,caseof3 06101.0103 .8 3lbs.(1.4kg) EasyPour®orangehandle,64oz.,caseof6 06101.0106 1.5 6lbs.(2.7kg) EasyPour®orangehandle,64oz.,caseof12 06101.0112 3.0 12lbs.(5.5kg) EasyPour®orangehandle,64oz.,caseof24 06101.0124 5.8 23lbs.(10.4kg)Private label Easy Pour® decanters are available; call your BUNN Sales Representative for information. Decanter,glass–blackhandle,64oz.,caseof3 42400.0003 0.8 4.5lbs.(2.1kg) Decanter,glass–blackhandle,64oz.,caseof24 42400.0024 5.8 26lbs.(11.8kg)

Decanter,glass–orangehandle,64oz.,caseof3 42401.0003 0.8 4.5lbs.(2.1kg) Decanter,glass–orangehandle,64oz.,caseof24 42401.0024 5.8 26lbs.(11.8kg)

Decanter,stainlesssteel,64oz. 06026.0000 0.2 1.5lb.(0.7kg) Decanter,stainlesssteel,orangetext,64oz.,decaf 06041.0000 0.2 1.5lb.(0.7kg)

Decanter,glass–blackhandle,50oz.,caseof1 20435.0000 0.2 1.17lb.(0.53kg)


Bunn-O-Matic EASYPOUR-0106 Item#:53




ITEM# 54 - WORK COUNTER (1 REQ'D)

Eagle Group CUSTOM

Spec-Master® Enclosed Work Table, 102"W x 24"D, 14/304 stainless steel top with 4-1/2" backsplash,rolled front edge, square turndown ends, stainless steel wrapper, hinged doors, stainless steel legs,adjustable feet, NSF

Mfr Qty Model Spec

ACCESSORIES

End splash, per end, all heights (RIGHT ENDAND PARTIAL LEFT END SPLASH AT COLUMN)

E302Eagle Group

Sink, 14" x 16" x 9-1/2" bowl, complete withfaucet and basket drain (LEFT END)

E212Eagle Group

Door Lock-L1Eagle Group



DIRECTSIZE

COLDSIZE

INDIRECTSIZE

HOTSIZE

HOTGPH

CONDENSERINLET SIZE

FILTEREDSIZE


WATER WASTE

HOTAFF

COLDAFF

FILTEREDAFF

1/2" (2) 1-1/2"

1/2"1 1



EG10.32 Rev. 11/08


SheetNo.

EG10.32

Spec-Master

®Enclosed

Worktables

with

Backsplash




S.I.S. No.:

Specification Sheet




Spec-Master® EnclosedWorktables with BacksplashMODELS:

Short Form SpecificationsEagle Spec-Master® Enclosed Base Worktable, model_______________. Top is 14/304 stainless steel, sides andback are heavy gauge stainless steel. (Open Front, StainlessSteel Sliding Door, or Stainless Steel Hinged Door) modelswith 11⁄2˝ rolled edge on front, sides turned down, and4˝ backsplash on rear. Constructed with uni-lok® patentedgusset system, with the gussets recessed into the hat channelsto reduce lateral movement. 15⁄8˝ O.D. stainless steel tubularlegs with adjustable bullet feet.

CB2436SE-BSCB2448SE-BSCB2460SE-BSCB2472SE-BSCB2484SE-BSCB2496SE-BSCB24120SE-BSCB3036SE-BSCB3048SE-BSCB3060SE-BSCB3072SE-BSCB3084SE-BSCB3096SE-BSCB30120SE-BS

OB2436SE-BSOB2448SE-BSOB2460SE-BSOB2472SE-BSOB2484SE-BSOB2496SE-BSOB24120SE-BSOB3036SE-BSOB3048SE-BSOB3060SE-BSOB3072SE-BSOB3084SE-BSOB3096SE-BSOB30120SE-BS

CBH2436SE-BSCBH2448SE-BSCBH2460SE-BSCBH2472SE-BSCBH2484SE-BSCBH2496SE-BSCBH24120SE-BSCBH3036SE-BSCBH3048SE-BSCBH3060SE-BSCBH3072SE-BSCBH3084SE-BSCBH3096SE-BSCBH30120SE-BS

Features• All-welded design.• Available with open front, sliding doors, or hinged doors.• Doors are 20 gauge type 430 stainless steel.• Top mechanically polished to satin finish.• Top is 14 gauge type 304 stainless steel reinforced with afull length “hat” channel support.

• Body is heavy gauge type 430 stainless steel.• Sound-deadened between top and frame.• 15⁄8˝ (42mm)-diameter type 304 stainless legs.• 1˝ (25mm) adjustable stainless steel feet.• 11⁄2˝ (38mm) sanitary rolled rim on front.• 41⁄2˝ (114mm) backsplash on rear.• Square edge on ends for flush fit.• Optional fixed center shelf available. To order, add suffix“-CS” to model number. Example: OB2436SE-BS-CS

Options / AccessoriesLock (for units with doors)Casters*OvershelfCenter shelf

* To order table with 4˝ (102mm)-diameter casters, add suffix “-CA”(ex: OB3048SE-BS-CA). To order table with 5˝ (127mm)-diameter casters,add suffix “-CAH” (ex: CB3048SE-BS-CAH).


enclosed worktablewith hinged doors

Eagle Group CUSTOM Item#:54




CatalogSp

ecificationSh

eetN

o.EG

10.32

Spec-M

aster®

Enclosed

Worktableswith

Backsplash


S.I.S. No.:

Rev. 11/08







width length weightmodel # in. mm in. mm lbs. kgOB2436SE-BS 24˝ 610 36˝ 914 133 60.3OB2448SE-BS 24˝ 610 48˝ 1219 161 73.0OB2460SE-BS 24˝ 610 60˝ 1524 202 91.6OB2472SE-BS 24˝ 610 72˝ 1829 243 110.2OB2484SE-BS 24˝ 610 84˝ 2134 284 128.8OB2496SE-BS 24˝ 610 96˝ 2438 326 147.9OB24120SE-BS 24˝ 610 120˝ 3048 390 176.9OB3036SE-BS 30˝ 762 36˝ 914 137 62.1OB3048SE-BS 30˝ 762 48˝ 1219 167 75.8OB3060SE-BS 30˝ 762 60˝ 1524 201 91.2OB3072SE-BS 30˝ 762 72˝ 1829 251 113.9OB3084SE-BS 30˝ 762 84˝ 2134 299 135.6OB3096SE-BS 30˝ 762 96˝ 2438 344 156.0OB30120SE-BS 30˝ 762 120˝ 3048 438 198.7

width length weightmodel # in. mm in. mm lbs. kgCB2436SE-BS 24˝ 610 36˝ 914 139 63.1CB2448SE-BS 24˝ 610 48˝ 1219 171 77.6CB2460SE-BS 24˝ 610 60˝ 1524 214 97.1CB2472SE-BS 24˝ 610 72˝ 1829 256 116.1CB2484SE-BS* 24˝ 610 84˝ 2134 304 137.9CB2496SE-BS* 24˝ 610 96˝ 2438 343 155.6CB24120SE-BS* 24˝ 610 120˝ 3048 390 176.9CB3036SE-BS 30˝ 762 36˝ 914 143 64.9CB3048SE-BS 30˝ 762 48˝ 1219 174 78.9CB3060SE-BS 30˝ 762 60˝ 1524 221 100.2CB3072SE-BS 30˝ 762 72˝ 1829 264 119.8CB3084SE-BS* 30˝ 762 84˝ 2134 319 144.7CB3096SE-BS* 30˝ 762 96˝ 2438 355 161.0CB30120SE-BS* 30˝ 762 120˝ 3048 458 207.8

width length weightmodel # in. mm in. mm lbs. kgCBH2436SE-BS 24˝ 610 36˝ 914 139 63.1CBH2448SE-BS 24˝ 610 48˝ 1219 171 77.6CBH2460SE-BS 24˝ 610 60˝ 1524 214 97.1CBH2472SE-BS 24˝ 610 72˝ 1829 256 116.1CBH2484SE-BS* 24˝ 610 84˝ 2134 304 137.9CBH2496SE-BS* 24˝ 610 96˝ 2438 343 155.6CBH24120SE-BS* 24˝ 610 120˝ 3048 390 176.9CBH3036SE-BS 30˝ 762 36˝ 914 143 64.9CBH3048SE-BS 30˝ 762 48˝ 1219 174 78.9CBH3060SE-BS 30˝ 762 60˝ 1524 221 100.2CBH3072SE-BS 30˝ 762 72˝ 1829 264 119.8CBH3084SE-BS* 30˝ 762 84˝ 2134 319 144.7CBH3096SE-BS* 30˝ 762 96˝ 2438 355 161.0CBH30120SE-BS* 30˝ 762 120˝ 3048 458 207.8



FRONT VIEW


SIDE VIEW


Eagle Group CUSTOM Item#:54



EG10.50 Rev. 04/12


EG10.50

Table Modifications




S.I.S. No.:


Specification Sheet


















Cata

log

Spec

ifica

tion

Shee

t No.

Tabl

e M

odifi

catio

nsItem No.:


Rev. 04/12




EG10

.50












model # description





Continental Refrigerator Model: 1R Item #55


ITEM# 55 - REACH-IN REFRIGERATOR, 1 SECTION (1 REQ'D)

Continental Refrigerator 1R

Refrigerator, reach-in, one-section, self-contained refrigeration, aluminum exterior & interior, stainlesssteel front & door, standard depth cabinet, full-height solid doors, exterior dial-type thermometer,electric condensate evaporator, 5" casters, 1/4 hp, ENERGY STAR®

Mfr Qty Model Spec

ACCESSORIES


115v/60/1, 6.9 amps, 10' cord, NEMA 5-15P,standard


Refrigerator: Self-Contained refrigeration, 1/4hp, standard



Door hinged on left1Continental Refrigerator




ELECTRICAL

PHASE AFF

6.9 1/45-15P120 60 Cord & Plug11





Project Name:

Model Specified:

Location:

Item No: Quantity:

APPROVAL:


DIMENSIONAL DATA












No. of Shelves 3


Tray Slide Capacity (half) 11 ea.

Tray Slide Capacity (full) 24 ea.

REFRIGERANT DATA



ELECTRICAL DATA

Cabinet 115/60/1



Total Amps 6.9

Cabinet Amps 1.6

SHIPPING DATA


Width - Crated (in.) 315/8 (803 mm)







* Rating @ +25°F evaporator, 90°F ambientFigures in parentheses reflect metric equivalents.


1R - One Section RefrigeratorSolid Door, Self-ContainedUnits available in one, two and three sections. All upright models contain 3” non-CFC polyurethane foam insulation. Our selection of Reach-In Refrigerators are available in standard depth, Shallow Depth, Slim Line and Extra Wide models.

Stainless steel case back• Adjustable Legs•

Pan slide assemblies• Half doors•

Increased refrigeration systems• Pass-Thru•

Stainless steel shelves• Remote models•

Digital thermometer• Shallow-Depth•

Rehinging of doors (• consult factory) Hinged glass doors•

Expansion valve system • Special electrical requirements• (consult factory)


ENERGY STAR® Qualified Commercial Refrigerator





®


MADE IN THE U.S.A.



05/27/10





Environmentally-safe R-134a refrigerant





Self-closing doors



5” casters


MODEL FEATURES


External dial thermometer


ELECTRICAL


10 ft. cord and plug set included, 90° with NEMA

STANDARD


SUFFIX SA


SUFFIX SS



1R - One Section RefrigeratorModel Blueprint

1R (10/7/10)

583/4”(1492 mm)

Door Opening

193/8”(492 mm)

Door Opening

5”(127 mm)

Casters

821/4”(2096 mm)

13” (330 mm)

12” (305 mm)

26”(660 mm)

543/4”(1391 mm)

29”(737 mm)

32”(813 mm)

34”(864 mm)

353/8”(899 mm)

RIGHT VIEW

FRONT VIEW

583/4”(1492 mm)

Door Opening

193/8”(492 mm)

Door Opening

5”(127 mm)

Casters

821/4”(2096 mm)

13” (330 mm)

12” (305 mm)

26”(660 mm)

543/4”(1391 mm)

29”(737 mm)

32”(813 mm)

34”(864 mm)

353/8”(899 mm)



Eagle Group Model: CBH3036SE-BS Item #56


ITEM# 56 - WORK COUNTER (1 REQ'D)

Eagle Group CBH3036SE-BS

Spec-Master® Enclosed Work Table, 36"W x 30"D, 14/304 stainless steel top with 4-1/2" backsplash,rolled front edge, square turndown ends, stainless steel wrapper, hinged doors, stainless steel legs,adjustable feet, NSF

Mfr Qty Model Spec

ACCESSORIES

Center shelf full width for enclosed baseworktables, add -FCS model no.

1Eagle Group

End splash, per end, all heights (LEFT END)E301Eagle Group





EG10.32 Rev. 11/08


SheetNo.

EG10.32

Spec-Master

®Enclosed

Worktables

with

Backsplash




S.I.S. No.:

Specification Sheet




Spec-Master® EnclosedWorktables with BacksplashMODELS:

Short Form SpecificationsEagle Spec-Master® Enclosed Base Worktable, model_______________. Top is 14/304 stainless steel, sides andback are heavy gauge stainless steel. (Open Front, StainlessSteel Sliding Door, or Stainless Steel Hinged Door) modelswith 11⁄2˝ rolled edge on front, sides turned down, and4˝ backsplash on rear. Constructed with uni-lok® patentedgusset system, with the gussets recessed into the hat channelsto reduce lateral movement. 15⁄8˝ O.D. stainless steel tubularlegs with adjustable bullet feet.

CB2436SE-BSCB2448SE-BSCB2460SE-BSCB2472SE-BSCB2484SE-BSCB2496SE-BSCB24120SE-BSCB3036SE-BSCB3048SE-BSCB3060SE-BSCB3072SE-BSCB3084SE-BSCB3096SE-BSCB30120SE-BS

OB2436SE-BSOB2448SE-BSOB2460SE-BSOB2472SE-BSOB2484SE-BSOB2496SE-BSOB24120SE-BSOB3036SE-BSOB3048SE-BSOB3060SE-BSOB3072SE-BSOB3084SE-BSOB3096SE-BSOB30120SE-BS

CBH2436SE-BSCBH2448SE-BSCBH2460SE-BSCBH2472SE-BSCBH2484SE-BSCBH2496SE-BSCBH24120SE-BSCBH3036SE-BSCBH3048SE-BSCBH3060SE-BSCBH3072SE-BSCBH3084SE-BSCBH3096SE-BSCBH30120SE-BS

Features• All-welded design.• Available with open front, sliding doors, or hinged doors.• Doors are 20 gauge type 430 stainless steel.• Top mechanically polished to satin finish.• Top is 14 gauge type 304 stainless steel reinforced with afull length “hat” channel support.

• Body is heavy gauge type 430 stainless steel.• Sound-deadened between top and frame.• 15⁄8˝ (42mm)-diameter type 304 stainless legs.• 1˝ (25mm) adjustable stainless steel feet.• 11⁄2˝ (38mm) sanitary rolled rim on front.• 41⁄2˝ (114mm) backsplash on rear.• Square edge on ends for flush fit.• Optional fixed center shelf available. To order, add suffix“-CS” to model number. Example: OB2436SE-BS-CS

Options / AccessoriesLock (for units with doors)Casters*OvershelfCenter shelf

* To order table with 4˝ (102mm)-diameter casters, add suffix “-CA”(ex: OB3048SE-BS-CA). To order table with 5˝ (127mm)-diameter casters,add suffix “-CAH” (ex: CB3048SE-BS-CAH).


enclosed worktablewith hinged doors

Eagle Group CBH3036SE-BS Item#:56




CatalogSp

ecificationSh

eetN

o.EG

10.32

Spec-M

aster®

Enclosed

Worktableswith

Backsplash


S.I.S. No.:

Rev. 11/08







width length weightmodel # in. mm in. mm lbs. kgOB2436SE-BS 24˝ 610 36˝ 914 133 60.3OB2448SE-BS 24˝ 610 48˝ 1219 161 73.0OB2460SE-BS 24˝ 610 60˝ 1524 202 91.6OB2472SE-BS 24˝ 610 72˝ 1829 243 110.2OB2484SE-BS 24˝ 610 84˝ 2134 284 128.8OB2496SE-BS 24˝ 610 96˝ 2438 326 147.9OB24120SE-BS 24˝ 610 120˝ 3048 390 176.9OB3036SE-BS 30˝ 762 36˝ 914 137 62.1OB3048SE-BS 30˝ 762 48˝ 1219 167 75.8OB3060SE-BS 30˝ 762 60˝ 1524 201 91.2OB3072SE-BS 30˝ 762 72˝ 1829 251 113.9OB3084SE-BS 30˝ 762 84˝ 2134 299 135.6OB3096SE-BS 30˝ 762 96˝ 2438 344 156.0OB30120SE-BS 30˝ 762 120˝ 3048 438 198.7

width length weightmodel # in. mm in. mm lbs. kgCB2436SE-BS 24˝ 610 36˝ 914 139 63.1CB2448SE-BS 24˝ 610 48˝ 1219 171 77.6CB2460SE-BS 24˝ 610 60˝ 1524 214 97.1CB2472SE-BS 24˝ 610 72˝ 1829 256 116.1CB2484SE-BS* 24˝ 610 84˝ 2134 304 137.9CB2496SE-BS* 24˝ 610 96˝ 2438 343 155.6CB24120SE-BS* 24˝ 610 120˝ 3048 390 176.9CB3036SE-BS 30˝ 762 36˝ 914 143 64.9CB3048SE-BS 30˝ 762 48˝ 1219 174 78.9CB3060SE-BS 30˝ 762 60˝ 1524 221 100.2CB3072SE-BS 30˝ 762 72˝ 1829 264 119.8CB3084SE-BS* 30˝ 762 84˝ 2134 319 144.7CB3096SE-BS* 30˝ 762 96˝ 2438 355 161.0CB30120SE-BS* 30˝ 762 120˝ 3048 458 207.8

width length weightmodel # in. mm in. mm lbs. kgCBH2436SE-BS 24˝ 610 36˝ 914 139 63.1CBH2448SE-BS 24˝ 610 48˝ 1219 171 77.6CBH2460SE-BS 24˝ 610 60˝ 1524 214 97.1CBH2472SE-BS 24˝ 610 72˝ 1829 256 116.1CBH2484SE-BS* 24˝ 610 84˝ 2134 304 137.9CBH2496SE-BS* 24˝ 610 96˝ 2438 343 155.6CBH24120SE-BS* 24˝ 610 120˝ 3048 390 176.9CBH3036SE-BS 30˝ 762 36˝ 914 143 64.9CBH3048SE-BS 30˝ 762 48˝ 1219 174 78.9CBH3060SE-BS 30˝ 762 60˝ 1524 221 100.2CBH3072SE-BS 30˝ 762 72˝ 1829 264 119.8CBH3084SE-BS* 30˝ 762 84˝ 2134 319 144.7CBH3096SE-BS* 30˝ 762 96˝ 2438 355 161.0CBH30120SE-BS* 30˝ 762 120˝ 3048 458 207.8



FRONT VIEW


SIDE VIEW


Eagle Group CBH3036SE-BS Item#:56



EG10.50 Rev. 04/12


EG10.50

Table Modifications




S.I.S. No.:


Specification Sheet


















Cata

log

Spec

ifica

tion

Shee

t No.

Tabl

e M

odifi

catio

nsItem No.:


Rev. 04/12




EG10

.50












model # description





Item #57


ITEM# 57 -

<Spare>


Eagle Group Model: OB3060SE Item #58



Eagle Group OB3060SE

Spec-Master® Enclosed Work Table, 60"W x 30"D, open front, 14/304 stainless steel top with rollededges front & back, square turndown ends, stainless steel wrapper & legs, adjustable feet, NSF

Mfr Qty Model Spec

ACCESSORIES


1Eagle Group

5" Casters, set of 4, add suffex -CAH1Eagle Group

Spec-Master® Enclosed Work Table, 72"W x30"D, open front, 14/304 stainless steel topwith rolled edges front & back, squareturndown ends, stainless steel wrapper & legs,adjustable feet, NSF

OB3072SE1Eagle Group


1Eagle Group

5" Casters, set of 4, add suffex -CAH1Eagle Group



EG10.30 Rev. 11/08


SheetNo.

EG10.30

Spec-Master

®Enclosed

Worktables

with

FlatTop




S.I.S. No.:

Specification Sheet




Spec-Master® EnclosedWorktables with Flat TopMODELS:

Options / Accessories

CB2436SECB2448SECB2460SECB2472SECB2484SECB2496SECB24120SECB3036SECB3048SECB3060SECB3072SECB3084SECB3096SECB30120SE

OB2436SEOB2448SEOB2460SEOB2472SEOB2484SEOB2496SEOB24120SEOB3036SEOB3048SEOB3060SEOB3072SEOB3084SEOB3096SEOB30120SE

CBH2436SECBH2448SECBH2460SECBH2472SECBH2484SECBH2496SECBH24120SECBH3036SECBH3048SECBH3060SECBH3072SECBH3084SECBH3096SECBH30120SE

Design and Construction Features• All-welded design.• Available with open front, sliding doors, or hinged doors.• Doors are 20 gauge type 430 stainless steel.• Top mechanically polished to satin finish.• Sound-deadened between top and frame.• 15⁄8˝ (42mm)-diameter type 304 stainless legs.• 1˝ (25mm) stainless steel adjustable bullet feet.• 11⁄2˝ (38mm) sanitary rolled rim on front and back withsquare edge on ends for flush fit.

• Optional fixed center shelf available. To order, add suffix“-CS” to model number. Example: OB2436SE-CS

Lock (for units with doors)Casters*OvershelfCenter shelf

* To order table with 4˝ (102mm)-diameter casters, add suffix “-CA”(ex: OB3048SE-CA). To order table with 5˝ (127mm)-diameter casters,add suffix “-CAH” (ex: CB3048SE-CAH).

Short Form SpecificationsEagle Spec-Master® Enclosed Base Worktable, model________________. Top is 14/304 stainless steel, sides andback are heavy gauge stainless steel. (Open Front, Stainlesssteel Sliding Doors, or Stainless steel Hinged Door) modelswith 11⁄2˝ rolled edge on front and rear, sides turned down.Constructed with uni-lok® patented gusset system, with thegussets recessed into the hat channels to reduce lateralmovement. 15⁄8˝ O.D. stainless steel tubular legs with adjustablebullet feet.


enclosed worktablewith sliding doors





CatalogSp

ecificationSh

eetN

o.EG

10.30

Spec-M

aster®

Enclosed

Worktableswith

Flat

Top


S.I.S. No.:

Rev. 11/08







width length weightmodel # in. mm in. mm lbs. kgOB2436SE 24˝ 610 36˝ 914 132 59.9OB2448SE 24˝ 610 48˝ 1219 160 72.6OB2460SE 24˝ 610 60˝ 1524 200 90.7OB2472SE 24˝ 610 72˝ 1829 240 108.9OB2484SE 24˝ 610 84˝ 2134 281 127.5OB2496SE 24˝ 610 96˝ 2438 322 146.1OB24120SE 24˝ 610 120˝ 3048 366 166.0OB3036SE 30˝ 762 36˝ 914 136 61.7OB3048SE 30˝ 762 48˝ 1219 166 75.3OB3060SE 30˝ 762 60˝ 1524 199 90.3OB3072SE 30˝ 762 72˝ 1829 248 112.5OB3084SE 30˝ 762 84˝ 2134 294 133.4OB3096SE 30˝ 762 96˝ 2438 340 154.2OB30120SE 30˝ 762 120˝ 3048 432 196.0

width length weightmodel # in. mm in. mm lbs. kgCB2436SE 24˝ 610 36˝ 914 138 62.6CB2448SE 24˝ 610 48˝ 1219 170 77.1CB2460SE 24˝ 610 60˝ 1524 212 96.2CB2472SE 24˝ 610 72˝ 1829 254 115.2CB2484SE* 24˝ 610 84˝ 2134 299 135.6CB2496SE* 24˝ 610 96˝ 2438 339 153.8CB24120SE* 24˝ 610 120˝ 3048 384 174.2CB3036SE 30˝ 762 36˝ 914 142 64.4CB3048SE 30˝ 762 48˝ 1219 173 78.5CB3060SE 30˝ 762 60˝ 1524 219 99.3CB3072SE 30˝ 762 72˝ 1829 261 118.4CB3084SE* 30˝ 762 84˝ 2134 312 141.5CB3096SE* 30˝ 762 96˝ 2438 350 158.8CB30120SE* 30˝ 762 120˝ 3048 450 204.1

width length weightmodel # in. mm in. mm lbs. kgCBH2436SE 24˝ 610 36˝ 914 138 62.6CBH2448SE 24˝ 610 48˝ 1219 170 77.1CBH2460SE 24˝ 610 60˝ 1524 212 96.2CBH2472SE 24˝ 610 72˝ 1829 254 115.2CBH2484SE* 24˝ 610 84˝ 2134 299 135.6CBH2496SE* 24˝ 610 96˝ 2438 339 153.8CBH24120SE* 24˝ 610 120˝ 3048 384 174.2CBH3036SE 30˝ 762 36˝ 914 142 64.4CBH3048SE 30˝ 762 48˝ 1219 173 78.5CBH3060SE 30˝ 762 60˝ 1524 219 99.3CBH3072SE 30˝ 762 72˝ 1829 261 118.4CBH3084SE* 30˝ 762 84˝ 2134 312 141.5CBH3096SE* 30˝ 762 96˝ 2438 350 158.8CBH30120SE* 30˝ 762 120˝ 3048 450 204.1



FRONT VIEW


SIDE VIEW




Item #59


ITEM# 59 -

<Spare>


Vulcan Model: EV36-S-6FP-208 Item #60


ITEM# 60 - RANGE, 36", 6 ROUND, SOLID CAST IRON FRENCH PLATES(1 REQ'D)

Vulcan EV36-S-6FP-208

Restaurant Range, 36", electric, (6) 2 kw French hot plates 9-1/2" round French plates with infinitecontrols, standard oversized oven with (1) rack, stainless steel front, sides, single deck high shelf & 6"legs, 17.0 kw, 208v

Mfr Qty Model Spec

ACCESSORIES

1 year limited parts & labor warranty, standard1Vulcan

208v/60/1ph, 17.0kw, 81.7 amps, field convertdirect wire

1Vulcan

Single deck s/s high shelf, standard1Vulcan

Casters (set of 4) (shipped in separate carton)CASTERS RR41Vulcan


ELECTRICAL

PHASE AFF

81.7 17208 60 Direct11






F-38254 (3/12)

36" ELECTRIC RESTAURANT RANGE6 FRENCH PLATES

Modular range shipped in multiple cartons

SPECIFICATIONS

36” wide electric restaurant range, Vulcan Model No. EV36-S-6FP-208. Fully MIG welded aluminized steel frame for added durability. Stainless steel front, sides, back riser, plate shelf and 6” adjustable legs. Six 9 1/2” round French plates, 2 KW input per plate. Full width pull out crumb tray located beneath the cooking top. Comes with one standard oversized oven. Oven interior measures 26 1/2”w x 26 3/8”d x 14”h. Comes with one oven rack and three rack positions. Oven door is heavy duty with an integrated door hinge / spring mechanism, requiring no adjustments. 5 KW input. Top browning heat control. Thermostat adjusts from 200°F to 500°F. Oven controls are protected from heat in an insulated side compartment. Requires 208, 240 or 480 volt, 1 or 3 phase power supply. All ranges are shipped in 3 phase and are field convertible to single phase.

Exterior Dimensions:

34”d x 36”w x 58”h on 6” adjustable legs

EV36-S-6FP-208 6 French Plates / Standard T Oversized Oven / 208V



STANDARD FEATURES

Fully MIG welded aluminized steel frame for added ■

durabilityStainless steel front, sides, back riser, shelf and legs ■

Six 9 1/2” round, 2 KW French plates with infinite ■

heat control switches. Four position heat switch on 480 volt.5 KW oven with top browning control ■

One standard oversized oven, interior measures ■

26 1/2”w x 26 3/8”d x 14”hFull width pull out crumb tray ■

Thermostat adjusts from 200°F to 500°F ■

Cool to the touch control knobs ■

One oven rack and three rack positions ■

18” x 26” sheet pans fit side to side and front to back ■

Requires 208, 240 or 480 volt, 1 or 3 phase power ■

supply (ranges shipped in 3 phase and are field convertible to single phase)

One year limited parts and labor warranty ■

ACCESSORIES (Packaged and Sold Separately)

Extra oven rack with two rack guides T

Set of four casters (two locking) T

10” stainless steel stub back T

ESB36 salamander broiler T

Reinforced high shelf for ESB36 salamander broiler T

Towel bar T

Cutting board T

Condiment rail T

Fryer shield T

Model EV36-S-6FP-208 shown with adjustable legs

Vulcan EV36-S-6FP-208 Item#:60





F-38254 (3/12)NOTE: In line with its policy to continually improve its products, Vulcan reserves the right to change materials and specifications without notice.

INSTALLATION INSTRUCTIONS

36" ELECTRIC RESTAURANT RANGE6 FRENCH PLATES

Clearances from Combustible Rear Sides Construction Range only 0” 0” Range and ESB Salamander Broiler 2” 8”

Clearance Note: Electric Ranges are 0 inches,sides and 0 inches rear from combustible and non-combustible constructions except when hot top sections are incorporated. Ranges incorporating hot top sections are 0 inches sides and 0 inches rear to non-combustibles and 6 inches sides and 6 inches rear to combustible constructions.

This appliance is manufactured for commercial use only and is not intended for home use.

34”

58”

37”

KNOCKOUT FORELECTRICAL

CONNECTIONS

8 1/8”3”

27 1/4”

46 1/2”

36”

AVAILABLE VOLTAGES - 208, 240 OR 480 VOLT - 1 OR 3 PHASE

3 PHASE LOADING NOMINAL AMPS PER LINE WIRE

MODEL NUMBER VOLTAGE

TOTAL CONNECTING

KW

KW PER PHASE 3 PHASE 1 PHASE

X-Y Y-Z X-Z X Y Z

EV36-S-6FP-208 208 17.0 4.0 8.0 5.0 37.5 50.0 54.1 81.7

EV36-S-6FP-240 240 17.0 4.0 8.0 5.0 32.5 43.3 46.9 70.8

EV36-S-6FP-480 480 17.0 4.0 8.0 5.0 16.3 21.7 23.5 35.4

Vulcan EV36-S-6FP-208 Item#:60


Metro Model: C5T8-ASB Item #61


ITEM# 61 - MOBILE HEATED CABINET (1 REQ'D)

Metro C5T8-ASB

C5™ T-Series Transport Armour™ heavy-duty insulated mobile heated cabinet, 5/6 Ht, adjustablebottom load slides-3.35" oc, top mount analog thermometer and electro-mechanical thermostat, (14)18" x 26" or (28) 12" x 20" x 2-1/2" pan capacity, 304 stainless steel, foamed-in-place polyurethaneinsulation, maximum temperature 200°F, 6" casters, 120V/60/1, 1400 watts, 12 amps, NEMA 5-15P,UL, CUL, NSF, ENERGY STAR®

Mfr Qty Model Spec

ACCESSORIES

APPROVED ALTERNATES: CARTER-HOFFMAN,WITTCO


ELECTRICAL

PHASE AFF

12 1.45-15P120 60 Cord & Plug11


InterMetro Industries CorporationNorth Washington StreetWilkes-Barre, PA 18705www.metro.com

Item # _____________________________________

Job _______________________________________

13.9

TM

etro C5 T-Series Transport Armour ™ H

eavy-Duty Heated H

olding Cabinet

Full HeightDigitalControls

Metro C5 T-SeriesTransport Armour™ Heavy-Duty Heated Holding Cabinet• Transport Armour™

• Foamed-in-place polyurethane insulation with Type 304 stainless steel structure provides superior heat retention, adds structural rigidity, and minimizes energy consumption

• Steel reinforced polymer handles double as bumpers to protect the cabinet from impact and provide ergonomic grab points for easy handling

• Polymer Armour panels are optimally located to protect the cabinet from facility hazards such as door handles and panic bars to help maintain a cleaner appearance. Molded in hand holds create additional grab points for easy handling

• Mobile Power Option features battery technology that gently circulates air inside the cabinet and keeps the controller illuminated and functional, while unplugged and in transit. Only available with digital controls.

• Controls: Choice of intelligent digital solid state or simple analog controls. Digital controls feature mobile power, low and high temperature alarms, diagnostic troubleshooting codes, and a manager lock-out feature.

• Performance: Ducted convection heating system provides fast heat-up and recovery times. Heating element located inside cabinet chamber for greater effi ciency. 1350W element in Full, 5/6, and ½ height models. Two 675W elements in dual cavity models.

• Sizes: C5 T-Series cabinets are available in Full height (single & dual cavity) (73.875", 1876mm), 5/6 height (65.438", 1662mm), and 1/2 height (48.563", 1234mm).

• Capacity: Three slide systems provide maximum holding capacity. Adjustable bottom load slides hold 18"x26" (457x660mm) sheet pans,12"x20" (305x508mm) steam pans, or GN pans on 1.675” increments. Adjustable lip load slides hold 18"x26" (457x660mm) sheet pans, 12"x20" (305x508mm) steam pans, or GN pans on 1.675" (43mm) increments. Fixed lip load slides hold 12"x20" (305x508mm) pans or GN pans on 1.675" (43mm) spacing.

• Reliability: Reliability and durability are designed from the ground up. High-quality heavy-duty components provide a long life of worry free use to withstand even the harshest applications.

• Energy Star: All T-Series models are Energy Star.Dual Cavity

DigitalControls

1/2 HeightAnalog

Controls

5/6 HeightDigital

Controls

Full HeightAnalog

Controls

Recall & MemoryView settings with the

touch of a button.

Low/High Temp AlarmsAlert operator while cabinet is in transit.

Digital DisplayEasy-to-read precise temperature read-out.

Mobile PowerGently circulates air inside the cabinet and keeps controller

illuminated and functional while unplugged and in transit.

IntuitiveEasy-to-use controls that anyone can understand.

Flush Recessed ControlsProvide protection while in transit.

Electro-Mechanical Control of TemperatureEasy-to-use dial puts you in control of cabinet temperature.

ANALOG CONTROLLER:

Analog ThermometerMeasures and displays temperature

when cabinet is off and in transit.

DIGITALCONTROLLER:

Diagnostic TroubleshootingDetects and displays codes when electrical

components are in need of servicing.

Metro C5T8-ASB Item#:61


13.9

T

Options/Accessories:• Small Item Shelf (C5T-SHELF)• Travel Latch / Hasp (C5T-TRVL)• Straight Plug (C5T-STRPLG)• Adjustable Bottom Load Slide Pair (C5T-BSLIDEPR)• Adjustable Lip Load Slide Pair (C5T-LSLIDEPR)• Correctional Packages • Full Height (C5T-CORR-9) • Full Height Dual Cavity (C5T-CORR-9D) • 5/6 Height (C5T-CORR-8) • 1/2 Height (C5T-CORR-5)

Met

ro C

5 T-

Serie

s Tr

ansp

ort A

rmou

r™ H

eavy

-Dut

y H

eate

d H

oldi

ng C

abin

et

Adjustable Bottom Load Pan Capacity Adjustable Lip Load Pan Capacity Fixed Lip Load Pan Capacity Slide Pairs 12" x 20" x 2.5" Slide Pairs 12" x 20" x 2.5" 12" x 20" x 2.5" Cabinet Size Provided Max† 18" x 26" GN 1/1 Provided Max* 18" x 26" GN 1/1 GN 2/1 GN 1/1

Full Height 16 32 16 32 16 32 16 32 16 32 Full Height Dual Cavity 14 28 14 32* 14 28 14 28 16 32 5/6 Height 14 27 14 28 14 27 14 26 14 28 1/2 Height 9 17 9 18 9 17 9 16 9 18

† Maximum number of slide pairs @ 1.675" spacing. Additional slide pairs ordered separately.* Floor of cabinet used for 1 pan level, 2 levels for dual cavity Metro Heated cabinets are for

hot food holding applications only.

Specifi cations• Cabinet Material: Type 304 stainless steel, 20-gauge polished exterior;

22-gauge interior.• Insulation: CFC free foamed-in-place polyurethane insulation. 2" thick

sides, top, and base. 3.5" thick on rear wall. R Value = 12.• Doors: Vaulted, Type 304 stainless steel, 20-gauge welded doors with

foamed-in-place polyurethane insulation. Three function information panel: cabinet ID, whiteboard, clipboard.

• Base: Heavy-duty one piece base, bolted to heavy-duty caster channels, reinforced by foamed-in-place polyurethane insulation.

• Casters: Heavy-duty 6" diameter polyurethane casters with 2" tread width. Plate mounted, bolted to 14-gauge caster channels. 2 swivel,2 swivel with brake. Load capacity 600 lbs. each.

• Hinges: Type 304 stainless steel, 11-gauge concealed hinges mounted to cabinet body, reinforced by backer plates. Non-removable 3/8" diameter stainless steel pin. Hinges are removable with tools.

• Door Latch: Flush mounted, heavy-duty Type 304 stainless steelpaddle latch.

• Door Gaskets: High quality, high temperature, cabinet mounted, santoprene gaskets. Removable without tools.

• Handles/Bumpers: Over molded polymer handles with 1/4" thick metal insert for reinforcement that double as protective bumpers.

• Digital Controls: Closed loop, solid state controller with low and high temperature alarms, diagnostic troubleshooting codes, manager lock-out feature, and 12V, 9.0A hour sealed lead acid battery mobile power feature that gently circulates fan and operates controller for up to 3 hours while cabinet is unplugged and in transit.

• Analog Controls: Analog thermometer with independent thermostatcontrol knob.

• Thermal Performance: 200°F (93°C) maximum operating temperature. • Cord: 71/2' coiled cord with NEMA 5-15P plug. 30" long when fully

retracted. Contact factory for 220-240V cabinet plug end options. • Clearance Requirements: 18" (46cm) away from any cooking

equipment. AVOID contact with surfaces that exceed 200°F (90°C). Minimum clearance from enclosures is 11/2" (38mm) on sides, back,and top.

• Slide Capacities:

Metro C5 T-Series Transport Armour™ Heavy-Duty Heated Holding Cabinet

DC5 T 9 D-

ModelNumberDescription

-

S B*Dual Cavity Slide Type

B = Adjustable Bottom LoadL = Adjustable Lip LoadF = Fixed Lip Load

ControllerD = DigitalA = Analog

Cabinet Height9 = Full Height8 = 5/6 Height5 = 1/2 Height

NEMA5-15P

For Standard Wattage Cabinets(120V, 12A, 60Hz, 1400W)

*Dual Cavity Option only available on Full Height Models

XC5 T 9 DExport Model Number Description

S BNEMA6-15P

Add “X” for Export Cabinets(220-240V, 6A, 50/60Hz, 1176-1400W)

- AC5 T 9 DModels with Accessories or Options

S BC5 T 9 D- AD S B

An “A” suffix indicates that accessories need to be factory assembledto the cabinet. Order accessories separately.

73.875"(1876mm)

73.875"(1876mm)

FULL HEIGHT

48.563"(1234mm)

1/2 HEIGHT FULL HEIGHT DUAL CAVITY

65.438"(1662mm)

5/6 HEIGHT

ALL CABINETS ARE 30" (762mm) WIDE AND 39.25" (997mm) DEEP

InterMetro Industries CorporationNorth Washington Street, Wilkes-Barre, PA 18705Phone: 570-825-2741Fax: 570-825-2852For Product Information:U.S. and Canada: 1.800.992.1776Outside U.S. and Canada: www.metro.com/contactus

All Metro Catalog Sheets are available on our Web Site: www.metro.comL03-282

Printed in U.S.A. 2/11

Information and specifi cations are subject to change without notice. Please confi rm at time of order.

Copyright © 2011 InterMetro Industries Corp.

Metro C5T8-ASB Item#:61


Miscellaneous Model: SAFE Item #62


ITEM# 62 - SAFE / EXISTING (1 REQ'D)

Miscellaneous SAFE

Safe

<Existing>


Item #63


ITEM# 63 -

<Spare>


Item #64


ITEM# 64 -

<Spare>


Item #65


ITEM# 65 -

<Spare>


Item #66


ITEM# 66 -

<Spare>


Miscellaneous Model: TV Item #67


ITEM# 67 - TELEVISION / EXISTING (1 REQ'D)

Miscellaneous TV

Television

<Existing>


Miscellaneous Model: SCCB Item #68


ITEM# 68 - SERVICE COUNTER W/ CABINET BASE / EXISTING (1 REQ'D)

Miscellaneous SCCB

Service Counter w/ cabinet base

<Existing>


Delfield Model: SMDBR1-SH Item #69


ITEM# 69 - REACH-IN DUAL TEMP CABINET / EXISTING/RELOCATE (1REQ'D)

Delfield SMDBR1-SH

Specification Line Series® Refrigerator/Freezer, Reach-in, 23.04 cubic feet, single-section withrefrigeration with solid door bottom, freezer with solid door top, stainless steel front, aluminum sidesand interior, (3) epoxy coated wire shelves, digital thermometer, top mounted compressor, stainlesssteel legs, refrigerator 1/5 hp & freezer 1/3 hp

<Existing>

Mfr Qty Model Spec

ACCESSORIES

115v/60/1, 14 amps, NEMA 5-20P, standard1Delfield

(2) Year parts & labor warranty, standard (USA)1Delfield

(5) Year compressor warranty standard1Delfield

Self-contained refrigeration system, standard(Refrigerator)

1Delfield

Self-contained refrigeration system, standard(Freezer)

1Delfield

Door hinged on right standard1Delfield


ELECTRICAL

PHASE AFF

12 1/5, 1/45-20P120 60 Cord & Plug11


MECHANICAL CONNECTIONS MUST BE VERIFIED


Project __________________________________

Item ____________________________________

Quantity ________________________________

CSI Section 11400

Approved _______________________________

Date ____________________________________


Phone: 800-733-8948 or 989-773-7981Fax: 800-669-0619 www.delfield.com

Exterior: SS and SA models shall have corrosion resistant stainless steel exterior cabinet sides, front and shroud. SM models shall have corrosion resistant aluminum on exterior cabinet sides and will have stainless front and shroud. All units shall have the upper shroud hinged with a gas assist stay open feature to provide easy access to the refrigeration system.

Interior: Cabinet interior shall be corrosion resistant stainless steel (SS models) or heavy gauge aluminum (SA and SM models). Bottom and top surfaces shall be die stamped to provide radius corners and recessed floor. Four wire shelves are provided, SA/SS standard shelves are chrome plated, SM standard shelves are epoxy coated. Shelves rest on clips which are adjustable on 1” increments on stainless steel pilasters affixed to the cabinet interior. Pilasters are removable without tools for cleaning. Mounted to the interior ceiling of each compartment, the interior incandescent lights are controlled automatically through a switch mounted in the hinge assembly to protect against breakage. Door openings are protected with high impact ABS breaker strips. An evaporator shall be mounted to the ceiling assuring low velocity, even air movement throughout the cabinet interior.

Doors: Exterior shall be corrosion resistant stainless steel. Interior liner shall be resilient high impact ABS material formed to protrude beyond the door gasket to protect the gasket from tearing. Each door has two edge mount, self closing, cam lift style hinges. Doors

can be removed from the cabinet without the use of tools. Metal door handle shall be recessed into the door for easy grip without impacting aisle space. Keyed door lock is mounted in the door next to the handle. Lock engages into a heavy duty strike mounted to the cabinet face. Door gaskets are magnetic and mount to the door snapping in place and are removable without tools.

Refrigeration system: Each compartment has its own separate refrigeration system. Condensing units are located on top of the cabinet, outside the food zone, behind the upper shroud. Evaporator coils are located inside the cabinet mounted to the interior ceiling of each compartment. Defrost is automatic. Condensate travels down a tube in the cabinet side wall to a receptacle mounted to the exterior bottom of the cabinet where it is evaporated with the aid of an electric heater. Each compartment’s temperature is individually monitored, controlled, and displayed on the exterior of the cabinet. Refrigerator compartment maintains between 33°F and 41°F. Freezer compartment maintains temperature between 0ºF and -5ºF.

Electrical: Unit comes with one 10’ cord and plug with single point connection to all cabinet and refrigeration system electronics. It is attached to a junction box mounted on the exterior top of the cabinet.

Specifications

Standard Features Options & AccessoriesStainless steel interior and exterior (SS)

Stainless steel exterior, aluminum interior (SA)Aluminum interior and exterior, stainless front (SM)Built in door locks with heavy duty strikesRecessed metal door handleTwo exterior digital thermometers with high/low temperature alarmEasy to use electronic controlEasy access “flip up” shroudFour wire shelves - SA/SS standard with chrome plated shelves and SM standard with epoxy coated shelvesTough ABS interior door liners10’ attached cord and plug6” adjustable stainless steel legsStainless steel breaker stripsHigh density foamed in place environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane keeps energy costs lowTwo year parts & labor warrantyFive year compressor warranty

•••

•••

•••

•••••

••

SSDTR1-SH Refrigerator top/freezer bottom stainless exterior and interior half door

SSDBR1-SH Freezer top/refrigerator bottom stainless exterior and interior half door

SADTR1-SH Refrigerator top/freezer bottom stainless exterior and aluminum interior half door

SADBR1-SH Freezer top/refrigerator bottom stainless exterior and aluminum interior half door

SMDTR1-SH Refrigerator top/freezer bottom stainless front aluminum exterior and interior half door

SMDBR1-SH Freezer top/refrigerator bottom stainless front aluminum exterior and interior half door

Models

Specification Line®Solid Door Single Section Dual Temp Refrigerator/Freezer Reach-Ins

Specification Line®: Solid Door Single Section D

ual Temp Refrigerator/Freezer Reach-Ins

Security (prison) package6” polyurethane castersDoor field rehingabilityStainless steel interior door linerAdditional shelvesTray slidesStainless steel backLaminate on front, sides and backBottom mount electricalStainless steel banking stripHeat shield endStainless steel kick plateLaminate kick plate4” stainless steel utility base230-50-1 electrical220-60-1 electrical

••••••••••••••••

SSDBR1-SH(shown with optional casters)

Delfield SMDBR1-SH Item#:69



Phone: 800-733-8948 or 989-773-7981Fax: 800-669-0619www.delfield.com

Spec

ifica

tion

Line

®So

lid D

oor

Sin

gle

Sec

tion

Du

al T

emp

Ref

rig

erat

or/F

reez

er R

each

-In

s

Printed in the U.S.A.DSSSD102/11

Delfield reserves the right to make changes to the design or specifications without prior notice.

Mechanical DataMODEL NUMBER DESCRIPTION VOLTAGE AMPS STORAGE

CAPACITYNUMBER OF

SHELVESH.P. BTU

CABINETBTU

SYSTEMSHIP

WEIGHTNEMA PLUG

ENERGY (KWH)

SSDTR1-SH, SADTR1-SH, SMDTR1-SH

Top RefrigeratorBottom Freezer

115/60/1 12.010.81ft3

10.81ft3

22

1/51/4

455744

15431260

525lbs (238kg)

5-20P 6.95

SSDBR1-SH, SADBR1-SH, SMDBR1-SH

Top FreezerBottom Refrigerator

115/60/1 12.010.81ft3

10.81ft3

22

1/41/5

744455

12601543

525lbs (238kg)

5-20P 6.95

ELEVATION VIEW

PLAN VIEW

END VIEW

30"

58"

6.12

81.12

29.00”73.7cm

34.00”86.4cm

56.00”142.2cm

83.00”210.8cm

SPECIFICATION LINE SPECIFICATION LINE SPECIFICATION LINE

25.00"63.5cm

52.00"132.1cm 79.00"

200.7cm34.00”86.4cm

34.00”86.4cm

48.00”121.9cm

44.00"111.8cm 34.00”

86.4cm

30.00"76.2cm

28.00"71.1cm

28.00"71.1cm

6.12”15.5cm

81.12”205.0cm

29.00

34.00

56.00

34.00

83.00

34.00

SPECIFICATION LINE SPECIFICATION LINE SPECIFICATION LINE

75.00”190.5cm

SPECIFICATION LINE SPECIFICATION LINE

Condensate heater in pan must be utilized or a �oor drain is required.

Delfield SMDBR1-SH Item#:69


Custom Model: BT Item #70


ITEM# 70 - BREAK TABLE / EXISTING (1 REQ'D)

Custom BT

Break Table


Custom Model: SCCB Item #71


ITEM# 71 - SERVICE COUNTER W/ CABINET BASE / EXISTING (1 REQ'D)

Custom SCCB

Service Counter w/ cabinet base

<Existing>


Custom Model: SS Item #72


ITEM# 72 - SERVICE SINK (DROP-IN) / EXISTING (1 REQ'D)

Custom SS

Service Sink (Drop-In)

<Existing>




ITEM# 73 - SERVICE COUNTER (1 REQ'D)

Eagle Group CUSTOM

Stainless Steel Counter - to be approximately 7'-8" x 2'-0" x 2'-10-1/2" high. To bestainless steel clad construction with doors and shelves on base as needed. To include stainless steeltop, 6" legs and adjustable bullet feet with removable stainless steel toe kick.

Mfr Qty Model Spec

ACCESSORIES





ITEM# 74 - WALL CABINET (1 REQ'D)

Eagle Group CUSTOM

Stainless Steel Wall Cabinets - to be stainless steel clad construction and to be approximately 6'-0" x 1'-0" x 2'-8 high. Cabinets to have (1) glass shelf with glass insert doors on front.Note: Blocking in wall by others. Electrical by others

Mfr Qty Model Spec

ACCESSORIES



Item #75


ITEM# 75 -

<Spare>


Custom Model: MCT Item #76


ITEM# 76 - MARBLE COUNTER TOP / EXISTING/RELOCATE (1 REQ'D)

Custom MCT

Marble Counter Top

Relocate the existing marble slab from worktable and place on top of the worktop refrigerator &freezer (Items 29 & 30)

<Existing>


SPECIFICATION SHEET

Documents

Transcript of SPECIFICATION SHEET