Proposed Administrative / IT - MPAKVN

S.No Description Amount

1 Electrical External 28988404.20

Total of Package 11 28988404.20

Proposed Administrative / IT/ ITES Office complex by MP AKVN

Indore, Near Crystal IT Park, Indore

Package 11- Electrical External

Project: Proposed Administrative / IT/ ITES Office complex by MP AKVN Indore, Near Crystal IT Park, Indore

Client: MPAKVN Indore

As Per MPPWD SOR 2014

SOR OVERHEAD LINES

1.0 42.2 Supply of support for overhead line RS joist /'H' Beam of

I.S. standard including drilling of required hole etc. complete as required.

A 42.2.6 H - Beam 152 x 152mm, Std weight 37.1 Kg / Mtr 111.00 Metre 2545 282,495

2.0 42.6 Supplying and drawing of stranded Aluminium Conductor Steel Reinforced (ACSR) confirming to IS:398-

1976 of approved make, stringing, making off complete with binding at existing insulator, jointing,

jumpering, tearing off,connecting etc. as required and clearing of obstacles (if any) etc.

A 42.6.5 ACSR 0.1 sq inch (100 Sq.mm Al. EQ. ) - (Dog) 0.60 Km. 89346 53,608

3.0 42.9 Supplying and drawing guard wire/earth wire/bearer wire 18.62 mm2 (4.87mm. Dia / 6swg) G.I.

including stringing, binding at existing insulators or brackets, jointing, jumpering, connecting &

cradle etc. as required and clearing of obstacles (if any)

0.40 Km. 17198 6,879

4.0 42.14 Erection of RS Joist pole / 'H' Beam / steel tubular / steel rail pole of length exceeding 10 metres

but not exceeding 13 metres in cement concrete M-10 (1 cement:3 core sand: 6 graded stone

aggregate 40mm nominal size) base, foundation, muffing including excavation and back refilling

etc. as required.

6.00 Each 4027 24,162

5.0 42.18 Erection of RS Joist pole / 'H' Beam / steel tubular / steel rail pole strut in cement concrete

1:3:6(1cement:3coarse sand: 6 aggregate 40mm nominal size) foundation including excavation and

refilling and secured with holding clamps, nuts and bolts, etc. as required. 3.00 Each 2844 8,532

6.0 42.22 Supplying and erection of stay set complete with 19/20mm.dia 1.8 metre long stay rod, turn buckle,

ancher plate of size 300mm x 300mm x 7.5mm, thimble, stay clamps, bow tightener, 7/4.00 dia G.I.

stay wire etc. in cement concrete M-10 (1 Cement : 3 Coarse and : 6 granded stone aggregate

40mm nominal size) foundation including excavation and back refilling etc. as required.

2.00 Each 3775 7,550

7.0 42.37 Labour charges for erection of Angle/Chanel/Flat iron fitting for over head line & sub-station etc

such as 'D' bracket,cross arms, top clamp, 'V' cross arms, Back/Support clamps or other similar

work etc. including nut bolts of required size, as required as per specification. 300.00 Kg. 7 2,100

8.0 42.4 Supplying and erection of 33KV Porcelain pin insulator required 18.00 Each 503 9,054

9.0 42.41 Supplying and erection of a set of three 11KV porcelain disc insulators for 33KV overhead lines

with galvanized insulator fittings, ball and socket type, and complete with galvanized strain clamp,

bolts, nuts, washers etc. as required. 18.00 Each 1212 21,816

10.0 42.53 Supplying and erection of single piece non-linear resistor type lightning arrestor (Set of 3 Nos.)

for 3 wire, 33KV overhead lines/sub-station with rated voltage of 30KV (rms) with a nominal

discharge current rating of 5 KA and complete with galvanized clamping arrangement, G.I. bolts,

nuts, washer etc. as required.

1.00 Set 31467 31,467

PARTIULARS

Package no. 11 General guidelines of quantities Part-II for External Electrification Work for proposed admistrative/ IT/ ITES Office by MP AKVN Indore, Crystal IT Park, Indore

PART -1

TOTAL

QUANTITY AMOUNTS.NO. SOR NO.

BUILDING ELECTRICAL WORKS

RATE UNIT

Nine Squares Architects Pvt. Ltd. 1



PARTIULARS TOTAL

QUANTITY AMOUNTS.NO. SOR NO. RATE UNIT

11.0 42.56 Supplying installing, testing & commissioning of outdoor H.T., AB switch assembly set gang

operated with brass contact parts, including required GI pipe operating rod, handle & locking

arrangement on On-Off position conforming to IS complete with required material and installing

on existing DP structure to complete the job as required as per specification.(Set of 3 nos.)

12.0 42.56.2 33KV, 600A. 1.00 set 21291 21,291

13.0 42.57 Supplying installing, testing & commissioning D.O. Fuse assembly with brass part contact for 33 or

11/0.4 KV DP Structure set of 3 Nos. with fuse barrel i/c required fuse element & other materials as

per specification on existing D.P. structure as required.101

14.0 42.57.2 33KV 1.00 set 14485 14,485

15.0 42.62 Supply, laying and fixing of G.I. earth coil of 4mm dia G.I. wire having 120 turns of nearly 50mm

dia. and 3 mt. long tail in existing pit duly earthed with pole etc complete as required as per

specification.

6.00 Each 220 1,320

16.0 42.63 Supplying and fixing 33/11/0.4 KV enamel coated danger board size 200x250mm with clamp on

existing HT/LT structure / poles. 2.00 Each 148 296

17.0 42.68 Supplying and fixing Limit switch with accessories & arrangement on existing HT/LT structure /

poles AB switch handle for inter locking between distribution panel main incoming LT switch gear/

system as required to complete the job. 1.00 each 1778 1,778

18.0 42.69 Supply & fixing fencing of chain link mesh 100 x 100 mm, 12 SWG GI wire for for D.P. structure

electric sub-station including single post of angle iron size 50x50x5mm, 2.5 mt long should be

provided up to 2.00 mt. apart or as required .The panel frame with required angle iron/ flat iron

members /cross members including mesh welded in frame panel, shall be erected between the

post. The angle iron post shall be erected in cement concrete 1:2:4 ( 20 mm graded metal )

foundation, including excavation of pit and refilling the same . The fencing shall be provided with

one entrance gate including locking arrangement as required as per specification. The height

of fencing shall be 2 mt. above ground level. Fencing shall be painted with required shade.

20.00 Sq.Mt 1110 22,200

19.0 42.71 Supplying & fixing of Fire Extinguisher/Refills as per IS specification20.0 42.71.1 ABC type duly refilled 6 Kg & ready to use 4 buckets set with sand, self supported M.S.stand i/c

shed 4.00 each 3616 14,464

21.0 42.71.5 duly painted with red colour as per IS. 4.00 each 4407 17,628

22.0 42.72 Supply of Rubber mat 2 x 1.0Mtr, 1100V Tested 50.00 each 1582 79,100

23.0 42.74 Supply of Hand Gloves 33KV Tested 1.00 pair 938 938

24.0 42.75 Supply of Fiber Discharge Rod I/C Connection copper Lead Tested 1.00 each 2995 2,995

25.0 42.76 Supply of Fiber D.O Operating Rod for 11 / 33KV Tested 1.00 each 2656 2,656

26.0 42.77 Supply of First Aid Box complete with medicine & bandage as per specification. 1.00 set 565 565

27.0 42.78 Supply of shock instruction chart duly framed with glass, as reqd. 4.00 each 339 1,356

28.0 42.82 Designing and construction of Pedestal (Plinth) for transformer of desired size including

excavation in hard rock/soft rock, base concrete 1:4:8, 20mm thick and pedestal of RCC 1:2:4

including required tar steel reinforcement for required height as per IE Rules from base concrete

including shuttering and finishing with 10mm thick plaster in cement mortor 1:3 curing & white

washing etc. complete as per specifications.

13.50 Cu. Mt. 8328 112,428




PARTIULARS TOTAL


29.0 42.83 Collection and spreading of metal dust, Murom and 40mm graded hard metal in sub-station yard

or as required as mentioned below -30.0 42.83.3 (iii) Metal 40 mm 40.00 Cu. Mt. 1087 43,480

TOTAL 784,643

NON SOR 33KV HT CABLE

31.0

Supplying & Laying of High Tension XLPE insulated and PVC sheathed 11 KV/33 KV grade confirming to

IS 7098/Part-II/85 with latest amendments, armoured of approved make with aluminium solid / stranded

conductor.

A Armoured Cable 33KV 3 Core 185 Sqmm. 140.00 meter 2398.00 335,720

TOTAL 335,720

NON SOR 33KV HT VCB PANEL

32.0

Design, manufacture, supply, installation, testing and commissioning of Panel set 33KV, 1250A,

31.5KA/3sec, Indoor type metal clad floor mounted vermin proof horizontal drawout fully interlocked

vertical isolation VCBcircuit breaker panel board fabricated out of minimum 2mm thick CRCA sheet as

per specifications. The panel shall be complete with all accessories / fitting / wiring like insulated copper

Busbar, cable termination boxes suitable for 3C x 240 Sqmm XLPE armoured aluminium cable for

incoming and outgoing feeder, foundation bolts etc. complete as required and as specified below :-

1.00 SET 1344460.00 1,344,460

Incoming: (including electrical & mechanical Interlocking between both incomers & Bus Coupler)

One No. 33KV 1250 Amps., 31.5KA/3sec electrically operated draw out type VCBcircuit breaker

complete with trip free spring charged closing mechanism, necessary auxiliary relays, control switches,

emergency hand trip devices and mechanical ON / OFF indicator etc with following metering and

protection (for each unit):.

PF Meter - 1nos

digital frequency meter - 1nos

digital type ammeter with 3 no. cast raisin CTs for metering (75/50/5-5A, CL- 1, 15VA) with ASS and 2

Amp SP MCB - 1 sets

voltmeter (0-40KV) with VSS - 1 sets

kW meter - 1 nos

kWh meter with RS-485 Port - 1nos

Phase indication lamps with 2Amp SP MCB for protection (Red, Yellow and Blue) - 3 no.

Red/ Green indicating lamp for close and open position - 2 no

amber indicating lamp for auto trip - 1 No.

clear indicating lamp for trip circuit healthy - 1nos

blue indicating lamp for spring charged-1nos

strip heater to prevent absorption of moisture -1nos

2Nos. O/C and 1No E/F (CDG-11 or equivalent) relay with 1 Nos. CTs 75/50 /5-5A, CL 5P10, 15VA - 1

sets

Master Trip Relay - 1nos

Trip circuit supervision relay - 1nos

33KV/1.712/110/1.712. 200VA burden P.T -1nos




PARTIULARS TOTAL


12 windows annunciation system for annunciation of transformer / electrical protection faults - 1 sets

Busbar : 1250 Amp. Color coded heat shrinkable PVC sleeved TP copper busbar of 26.3KA fault rating.

Make- ABB /Schneider/simens

Battery-Design, manufacture, assembly, supply erection, testing & commissioning of 150 AH, capacity 24

V DC Ni-Cadmium maintenance free batteries duly charged complete with connecting lead as required for

10 hour back up for all controls and equipment operating mechanism of VCBs , indications , protection

devices and alarm.Other details are as per Technical Specifications Of this tender. Make-Rocket / Exide

(SMF type).

Battery Charger Design, manufacture, assembly, supply, erection, testing & commissioning of suitable

float cum boost battery charger and necessary distribution board with 6 Nos. 16A outgoing feeders,

instrument panel, Amp, Volts meter, interconnections etc. power supply 230 V, 1 phase, 50 Hz ± 10%.

Charger trouble annunciation shall be provided through potential free contacts.

Make:- Chabi /Hertz/BCH

TOTAL 1,344,460




PARTIULARS TOTAL


NON SOR DISTRIBUTION TRANSFORMER

33.0

Supplying installing, connecting, testing and commissioning of 3 Phase, 50 Hz, 11/0.415KV or 33/0.415

KV, Delta/Star connected, Aluminium/Copper wound, oil filled, Indoor/outdoor type, Distribution/Station

transformer of accepted standard specification with accessories such as drain & filter valve, earthing

terminals, lifting arrangements of suitable size, dehydrating breather with silica gel of suitable size,

Conservator tank, air release devise, Rating & diagram plate including CI rollers, Radiators with shut off

valve, Cable end boxes on HT & LT side CABLE BOX , Explosion vent with diaphragm, Off load tap

changing switch, Buchholz relay, thermometer pocket with 6” dial type thermometer & OTI, wherever

required complete with first filling of oil with installation on existing DP structure or foundation etc.

complete as per specification. The no load and full load losses should not be more than as mentioned

below.

Complete liasioning work with State Electricity board, including preparation, submission and approval of

drawings/Papers as per rules of Electricity board, electrical inspector follow up and getting the approval

for installation, sanction of power and connection and charging. Complete work to be arranged in a

manner so as to get the power before final commissioning of project.A 1600 KVA 33/.415 KV (Copper wound with tap changing arrangement) 1.00 Each 1596702.00 1,596,702

B

Providing interlocking between 33KV GOD &Incoming HT Breaker complete using 4C*2.5 sq. mm.

copper armoured cable approved make maximum length 30 mtr. With limit switches approved make. 1.00 Each 6700 6,700

TOTAL 1,603,402

NON SOR SOALR SYSTEM

34.0

Supply, Installation , Testing & Commissioning of Solar System 10KWp with Solar Panels IP-65 grade

(Multi Crystalline Silicon) and String Inverters suitable for 10KW, 3-phase 440volts 50Hz with

minimum efficiency 90% complite with VRLA type battery of Exide/ Amara Raja with life of

minimum 4-5 years. Make - Ravin Infra Solar Project / TATA BP / Moserbear

1.00 No 1178107.00 1,178,107

TOTAL 1,178,107




PARTIULARS TOTAL


35.0 NON SOR DG SET

A

Design, manufacture, assembly, testing at works, supply, erection & testing at site as per specifications

complete in all respect of Silent DG Sets of KVA rating as specified below : Approved make- Cummins

/Caterpillar / MTU

415 Volts, 3 phase, 50 Hz, 1500 RPM AC alternator coupled with Water cooled Diesel Engine complete

with all accessories, like self starting device, fly wheel coupling with guard V belts cooling system,

instrument panel comprising of switch with key, battery charging device, safety control for lub oil pressure

and high cooling water temperature with tripping PLC 3100/2100 etc. The alternator insulation shall be

class 'H' with temperature rise limited to Class 'F' value suitable to with stand tropical conditions and shall

generally comply with BS 5000 and IS 4722. The over load capacity shall not be less than 110% of rated

capacity for 1 hour in every 12 hours. 24 Volt 360 AH sealed maintenance free chargeable lead acid

battery set complete with suitable trickle/boost chargers & battery leads. Neutral CT of suitable ratio &

Class PS accuracy with terminal box for Alternator REF protection for all DG sets to be provided. (DG

controlled by PLC Synchronisation / AMF panel .) Work includes complete liassoning & Co ordination

with MPSEB & Electrical Safety department for Drawing approval for DG Sets, Final Permission with

Electrical Safety department & SEB.

The DG set shall be mounted on a suitable designed fabricated rigid common base frame with

antivibration pads to provide not less than 99% vibration isolation. First filling of lube of lube oil & HSD

shall be included in DG Sets cost. The DG Set shall include all standard accessories, fittings, silencer,

flexible bellow, and instruments manuals etc. complete as per specifications.The design of DG Sets shall

conform to the requirement of CPCB.

B 750KVA (with acoustic enclosure ) 2.00 Set 5443605.00 10,887,210

B.1 Exhaust Piping :

Design, manufacture, supply, erection, testing & commissioning of 4.85 mm thick exhaust piping

conforming to IS:3589 with expansion joints, bends, support thermal insulation with 75mm thick glasswool

/mineral wool, wire chicken mesh over insulation and 24 gauge aluminium sheet cladding over the

exhaust pipes from silencer to atmosphere.

B.2 400 mm dia 20.00 RM 4600 92,000

B.3 250 mm dia 60.00 RM 2900 174,000

The sizes are indicative only and the Contractor should furnish calculation for exhaust piping size for

approval by the Consultant. The system should meet the performance of the engine without exceeding

the back pressure limit prescribed by engine supplier. Indicative exhaust pipe layout drawing is enclosed

for reference. In case the selected size as per calculation of back pressure does not fall in the size

specified above, the rate of pipe of size so selected shall also be indicated.

M.S. Structural Support :




PARTIULARS TOTAL


C

Chimney with with structure as per Pollution Control Act up to 30 Mtr. Height including all support &

structure , civil work , foundation for self supported chimney. Self supporting structure suitable for approx.

30 meter exhaust pipe above the ground level. This self supporting structure shall be complete with

Aviation light with battery & battery charger and earthing for lightning arrestor, including Guy wire

supports. This structure shall be designed for a wind velocity prevailing at site. Including welding, cutting,

2 layers of anti-coating primer with 2 layers of silver paint etc. complete as required. The item given

indicative and minimum to be provided. The bidder shall workout & furnish the detail for approval in their

proposal.

7,000.00 Kg. 80 560,000

C.1 FUEL DAY OIL TANK :

D

Supply, fabrication, installation, testing & commissioning of M.S. day oil tank of 990 litres capacity

fabricated out of min. 5mm thick M.S. sheet installed on steel frame or masonry pedestal with all

associated accessories, filters, valves & fittings including level controller complete as required, float

switch with contacts for remote interlock should be provided. The tank shall be suitably treated with oil

resistant paint/anticorrosive treatment on inside & outside surface respectively. The contact of level

controlled shall be wired up terminal block.

2.00 Set 10100 20,200

D.1 Fuel Oil Piping :

Supply, installation, testing and commissioning of schedule- B class MS piping conforming to IS-1239 for

fuel piping complete with all necessary fittings and valves between day oil storage tanks and DG

sets/priming motor including jointing of pipes, painting with 2 coats of red oxide and two coats of enamel

paint.

D.2 25 mm dia 30.00 RM 505 15,150

D.3 50 mm dia (for branch) 30.00 RM 810 24,300

E Oil Hand Pump :

E.1Supply & installation of hand pump for pumping out fuel from barrels to the day oil tank with flexible hose

pipe of 5 mtr length. 1.00 No. 4100 4,100

E.2

Supply,installation testing and commissioning of fuel meters for incoming line to tank with pipe size up to

25mm having digital disply and communication port.This shall be supplied along with power supply unit. 2.00 Nos. 5100 10,200

TOTAL 11,787,160

36.0 NON SOR BUSDUCT

A

Supply , installation, testing & commissioning of sheet steel enclosed 3 phase & neutral 415V, 50 Hz.

aluminium conductor bus duct including bends, transposition piece expansion joint, all flexible

connections as per specifications and drawings with all accessories, supports and termination of bus duct

to switchgear/transformer/DG SET.Cost for all supports required for mounting of bus duct with all bends ,

hardware ets is included in running meter cost.

A.1 2500A TPN ALUMINIUM BUSDUCT 65KA 10.00 Mtr 26972.00 269,720

B Supply , Installation testing and comissioning of flexible jointing box for end connection.

B.1 FOR BUS DUCT 2500A TPN 1.00 No 64531.00 64,531

TOTAL 334,251




PARTIULARS TOTAL


36.0 NON SOR LT PANELS AND DB

A Supply,Installation, testing & commissioning of following panels including supply and installation of all

switchgears (ACB, SFU, HRCFUSES, CONTACTOR, OVERLOAD RELAY, MCCB,CHNGEOVER

SWITCH,MCB,CAPACITOR) and all metering(Ammeter, Voltmeter,Frequency meter,PF meter,KW ,

KWH meter,KVA meter,Time Totaliser,multifunction meter,datalogger,) indication lamps (LED

type),selector switches , push buttons (Luminous/Non Luminous type) , connectors, aux contact blocks,

control fuses , instrument CTs , protection CTs ,APFCR relay , all protection relays , annunciation window

etc entire fabrication of panels, complete bus bar system, wiring, supply and installation of all hardware,

Powder Coating etc. as per technical speciifcation given in tender. Make :-

1. - ACB EDO type Microprocessor based LSIG - ABB / SIEMENS (3WL) / L&T (U-power) /

SCHENIDER (MASTERPACT -NS). 2. MCBB

Above 200 A Microprocessor based - ABB / SIEMENS(3VL) / Legrand (DPX) / SCHENIDER (NSX). 3.

MCBB Below 200 A Thermal setting - ABB / SIEMENS(3VL) / Legrand (DRX/DPX3) / SCHENIDER

(NSX). 4. MCB 10KA - ABB / SIEMENS / Legrand (DX3) / Schnedier (Acti9)

-

Main Electrical Panel with APFCR

1. MAIN LT PANEL

DG 1,2 INCOMER

1 - INDIACATING LAMP 'R' PHASE LED TYPE 240V AC 22.5 SQ.MM - ABB/MIMIC/RAAS - 22.5 LED TYPE - 2 ,

2 - INDIACATING LAMP 'Y' PHASE LED TYPE 240V AC 22.5 SQ.MM - ABB/MIMIC/RAAS - 22.5 LED TYPE - 2 ,

3 - INDIACATING LAMP 'B' PHASE LED TYPE 240V AC 22.5 SQ.MM - ABB/MIMIC/RAAS - 22.5 LED TYPE - 2 ,

4 - INDIACATING LAMP 'ON' LED TYPE 240V AC 22.5 SQ.MM - ABB/MIMIC/RAAS - 22.5 LED TYPE - 2 ,

5 - INDIACATING LAMP 'OFF' LED TYPE 240V AC 22.5 SQ.MM - ABB/MIMIC/RAAS - 22.5 LED TYPE - 2 ,

6 - INDIACATING LAMP 'TRIP' LED TYPE 240V AC 22.5 SQ.MM - ABB/MIMIC/RAAS - 22.5 LED TYPE - 2 ,

4,178,756 B 1.00 Each 4178756




PARTIULARS TOTAL


8 - CONTROL SWITCH 4 AMP - TECHNIK - - 12 ,

9 - 1250A TP ACB EDO TYPE LSIG - ABB - - 2 ,

10 - ELECTRCAL TRIP INDICATION E1/6 - ABB - - 2 ,

11 - UNDER VOLTAGE RELEASE E1/6 ( 240 V AC ) - ABB - - 2 ,

11 - CLOSING COIL 240V AC - ABB - - 2 ,

12 - KEY LOCK IN OPEN POS. SAME KEYS E1/6 - ABB - - 2 ,

13 - 400A TP NEUTRAL CONTACTOR - ABB - - 2 ,

14 - OVER CURRENT+EARTH FAULT RELAY IDMTL TYPE - ESSUN/C&S - - 2 ,

16 - MULTI FUNCTION METER - SCHNIEDER/NEPTUNE - DIGITAL - 2 ,

21 - CT 1600/5A CL - POWERTEK/NEW TEK - - 8 ,

22 - CT 1600/5A CL PROTECTION CLASS - POWERTEK/NEW TEK - - 6 ,

23 - CT' SHORTING LINKS - CONNECT WELL - - 12 ,

24 - 12 WAY WINDOW ANNOUNCIATOR - EAPL - - 2 ,

1 - PLC SYNCHRONIZING MODULE WITH REVERSE POWER RELAY , ALL FUNTION FOR PROTECTION OF DG

WITH PLC LOAD SHEARING , BATTARY CHARGER - DEIF - - 2 ,

2 - AUXILARY MATERIAL - DEIF - - 2 ,

- EB 1 INCOMER - - - ,







7 - INDIACATING LAMP 'MAINS AVAILABLE' LED TYPE 240V AC 22.5 SQ.MM - ABB/MIMIC/RAAS - 22.5 LED TYPE

- 1 ,

4,178,756 B 1.00 Each 4178756




PARTIULARS TOTAL



9 - 2500A FP ACB EDO TYPE LSIG - ABB - - 1 ,

10 - ELECTRCAL TRIP INDICATION E1/6 - ABB - E1/E6 - 1 ,




14 - OVER CURRENT+EARTH FAULT RELAY IDMTL TYPE - ESSUN/C&S - - 1 ,

17 - M.D. CONTROLLER WITH, 2 C/O RELAYS, RS-485 - ELMEASURE / TRINITY - DIGITAL - 1 ,

19 - VOLTMETER (0-500V) DIGITAL TYPE 96*96 SQ. MM - SCHNIEDER/NEPTUNE - DIGITAL - 1 ,

20 - VOLTAGE SELECTOR SWITCH - SALZER/KAYCEE - 10 AMP - 1 ,

21 - AMMETER (0-250A) DIGITAL TYPE 96*96 SQ. MM - SCHNIEDER/NEPTUNE - DIGITAL - 1 ,

22 - AMPERE SELECTOR SWITCH - SALZER/KAYCEE - 10 AMP - 1 ,

24 - CT 2500/5A CL - POWERTEK/NEW TEK - - 4 ,

25 - CT 2500/5A CL PS - POWERTEK/NEW TEK - - 3 ,

26 - CT' SHORTING LINKS - CONNECT WELL - - 4 ,

27 - HOOTER -230 V AC - VAISHNO / VEERAL - - 1 ,

28 - 4 WAY WINDOW ANNOUNCIATOR - EAPL - - 1 ,

- - - - ,

- APFC SECTION 1 - - - ,

4 - CONTROL SWITCH 4A - TECHNIC - - 3 ,

8 - APFC RELAY 12- STG - NEPTUNE / EPCOS - RM-12 - 1 ,

9 - CONTROL CONTACTOR 4 NO, COIL 230 V AC - ABB - NX40E - 2 ,

10 - AUXILLARY CONTACT BLOCK ( NO ) - ABB - - 8 ,

11 - AUTO MAN SW - SALZER/KAYCEE - 10 AMP - 1 ,

12 - TOGGLE SW - REPUTED - 10 AMP - 1 ,

13 - CONTROL TRANSFORMER 415-220V AC - REPUTED - - 1 ,

14 - FAN 6' WITH FILTER,THERMOSTATE, 6A SP MCB - REXONALD - 220 VOLT AC - 2 ,

- 100KVAR STEP - - - 5 NOS ,

1 - 250A TP MCCB 36 KA - ABB - T4N 250 FF - 5 ,

2 - SPREADER FOR MCCB - ABB - T4N - 5 ,

3 - 250A TP CONTACTOR AC3 - ABB - A260-30-11 - 5 ,

4 - CAPACITOR 50 KVAR, HEAVY DURY - CAN TYPE, 440V, 50 HZ - NEPTUNE/EPCOS - HEAVY DUTY - 10 ,

- - - - ,

4,178,756 B 1.00 Each 4178756




PARTIULARS TOTAL


- 50 KVAR STEP - - - 4 NOS ,




4 - CAPACITOR 50 KVAR, HEAVY DURY - CAN TYPE, 440V, 50 HZ - NEPTUNE/EPCOS - HEAVY DUTY - 4 ,

- - - - ,

- 25 KVAR STEP - - - 1 NOS ,

1 - MCB 63A, 3P, 10KA, C - CURVE - HAGER/SCHNIEDER - 10 KA - 1 ,


3 - CAPACITOR 25 KVAR, HEAVY DUTY TYPE,440V, 50 HZ - NEPTUNE/EPCOS - POWER - 9 - 1 ,

- - - - ,

- 15 KVAR STEP - - - 1 NOS ,



3 - CAPACITOR 15 KVAR, HEAVY DUTY TYPE,440V, 50 HZ - NEPTUNE/EPCOS - POWER - 9 - 1 ,

- - - - ,

- 10 KVAR STEP - - - 1 NOS ,



3 - CAPACITOR 10 KVAR, HEAVY DUTY ,440V, 50 HZ - NEPTUNE/EPCOS - POWER - 9 - 1 ,

- - - - ,

- - - - ,

- DIRECT CAPACITOR SECTION 1 - - - ,

- 25KVAR STEP - - - 1 NOS ,



3 - CAPACITOR 25 KVAR, HEAVY DURY - CAN TYPE, 440V, 50 HZ - NEPTUNE/EPCOS - POWER - 9 - 1 ,

- - - - ,





- - - - ,

4,178,756 B 1.00 Each 4178756




PARTIULARS TOTAL






- - - - ,





- - - - ,





- - - - ,





- - - - ,

- BUSCOUPLER - - - ,







4,178,756 B 1.00 Each 4178756




PARTIULARS TOTAL


7 - INDIACATING LAMP 'MAINS AVAILABLE' LED TYPE 240V AC 22.5 SQ.MM - ABB/MIMIC/RAAS - 22.5 LED TYPE

- 2 ,


9 - 1600A FP ACB EDO TYPE LSIG - ABB - - 2 ,

10 - ELECTRCAL TRIP INDICATION E1/6 - ABB - E1/E6 - 2 ,




- - - - ,

- OUTGOING 2 - - - ,

1 - 1250A FP MDO ACB 50KA LSIG - ABB - - 2 ,

2 - KWH METER DUEL SOURCE - SCHNIEDER/NEPTUNE - DIGITAL - 2 ,

3 - 1250/5A C.T. CL-1, - POWERTEK/NEW TEK - - 6 ,

- - - - ,

1 - 1000A FP ACB MDO 50KA LSIG - ABB - - 2 ,



- - - - ,

1 - 800A FP ACB MDO 50KA LSIG - ABB - - 2 ,



- - - - ,

1 - 630A FP MCCB 36 KA LSIG - ABB - T6N 630 FF - 2 ,


3 - ROHM FOR MCCB - ABB - T5N - 2 ,



11 U/V UNDER VOLTAGE RELEASE E1/6 ( 240 V AC ) ABB 1

11 CLOSING COIL 240V AC ABB 1

12 KEY LOCK IN OPEN POS. SAME KEYS E1/6 ABB 1

4,178,756 B 1.00 Each 4178756




PARTIULARS TOTAL


EB 2 INCOMER

1 IND INDIACATING LAMP 'R' PHASE LED TYPE 240V AC 22.5 SQ.MM ABB/MIMIC/RAAS 22.5 LED TYPE 1

2 IND INDIACATING LAMP 'Y' PHASE LED TYPE 240V AC 22.5 SQ.MM ABB/MIMIC/RAAS 22.5 LED TYPE 1

3 IND INDIACATING LAMP 'B' PHASE LED TYPE 240V AC 22.5 SQ.MM ABB/MIMIC/RAAS 22.5 LED TYPE 1

4 IND INDIACATING LAMP 'ON' LED TYPE 240V AC 22.5 SQ.MM ABB/MIMIC/RAAS 22.5 LED TYPE 1

5 IND INDIACATING LAMP 'OFF' LED TYPE 240V AC 22.5 SQ.MM ABB/MIMIC/RAAS 22.5 LED TYPE 1

6 IND INDIACATING LAMP 'TRIP' LED TYPE 240V AC 22.5 SQ.MM ABB/MIMIC/RAAS 22.5 LED TYPE 1

7 IND INDIACATING LAMP 'MAINS AVAILABLE' LED TYPE 240V AC 22.5 SQ.MM ABB/MIMIC/RAAS 22.5 LED

TYPE 1

8 SW CONTROL SWITCH 4 AMP TECHNIK 6

9 ACB 1600A FP ACB EDO TYPE LSIG ABB 1

10 ELECTRCAL TRIP INDICATION E1/6 ABB E1/E6 1

11 U/V UNDER VOLTAGE RELEASE E1/6 ( 240 V AC ) ABB 1

11 CLOSING COIL 240V AC ABB 1

12 KEY LOCK IN OPEN POS. SAME KEYS E1/6 ABB 1

14 RELAY OVER CURRENT+EARTH FAULT RELAY IDMTL TYPE ESSUN/C&S 1

17 M.D. CONTROLLER WITH, 2 C/O RELAYS, RS-485 ELMEASURE / TRINITY DIGITAL 1

19 MTR VOLTMETER (0-500V) DIGITAL TYPE 96*96 SQ. MM SCHNIEDER/NEPTUNE DIGITAL 1

20 VSS VOLTAGE SELECTOR SWITCH SALZER/KAYCEE 10 AMP 1

21 MTR AMMETER (0-250A) DIGITAL TYPE 96*96 SQ. MM SCHNIEDER/NEPTUNE DIGITAL 1

22 ASS AMPERE SELECTOR SWITCH SALZER/KAYCEE 10 AMP 1

24 CT CT 1600/5A CL POWERTEK/NEW TEK 4

25 CT CT 1600/5A CL PS POWERTEK/NEW TEK 3

26 CT CT' SHORTING LINKS CONNECT WELL 4

27 HTR HOOTER -230 V AC VAISHNO / VEERAL 1

28 4 WAY WINDOW ANNOUNCIATOR EAPL 1

OUTGOING 2

1 ACB 1250A FP MDO ACB 50KA LSIG ABB 1

2 MTR KWH METER DUEL SOURCE SCHNIEDER/NEPTUNE DIGITAL 1

3 CT 1250/5A C.T. CL-1, POWERTEK/NEW TEK 3

4,178,756 1.00 Each 4178756




PARTIULARS TOTAL


1 ACB 1000A FP ACB MDO 50KA LSIG ABB 1


3 CT 1000/5A C.T. CL-1, POWERTEK/NEW TEK 3 , MS powder coated Cabinet to accomadate above accessories

(approximate size- 8000mmX2175mm*1100mm) indoor type. MS powder coated Cabinet to accomadate

above accessories (approximate size- 7000mmX2175mm*1100mm) indoor type.

1 ACB 800A FP ACB MDO 50KA LSIG ABB 1



1 MCCB 630A FP MCCB 36 KA LSIG ABB T6N 630 FF 1

2 SPR SPREADER FOR MCCB ABB T5N 1

3 ROHM ROHM FOR MCCB ABB T5N 1








4,178,756 1.00 Each 4178756




PARTIULARS TOTAL







APFC SECTION 2

4 SW CONTROL SWITCH 4A TECHNIC 3

8 RELAY APFC RELAY 12- STG NEPTUNE / EPCOS RM-12 1

9 CONT CONTROL CONTACTOR 4 NO, COIL 230 V AC ABB NX40E 2

10 NO AUXILLARY CONTACT BLOCK ( NO ) ABB 8

11 SSW AUTO MAN SW SALZER/KAYCEE 10 AMP 1

12 SW TOGGLE SW REPUTED 10 AMP 1

13 TRXMR CONTROL TRANSFORMER 415-220V AC REPUTED 1

14 FAN FAN 6' WITH FILTER,THERMOSTATE, 6A SP MCB REXONALD 220 VOLT AC 2

100KVAR STEP 6 NOS

1 MCCB 250A TP MCCB 36 KA ABB T4N 250 FF 6


3 CONT 250A TP CONTACTOR AC3 ABB A260-30-11 6

4 CAP CAPACITOR 50 KVAR, HEAVY DURY - CAN TYPE, 440V, 50 HZ NEPTUNE/EPCOS POWER - 9 12

4,178,756 1.00 Each 4178756




PARTIULARS TOTAL


50 KVAR STEP 2 NOS





25 KVAR STEP 1 NOS

1 MCB MCB 63A, 3P, 10KA, C - CURVE HAGER/SCHNIEDER 10 KA 1


3 CAP CAPACITOR 25 KVAR, HEAVY DUTY TYPE,440V, 50 HZ NEPTUNE/EPCOS POWER - 9 1

15 KVAR STEP 1 NOS



3 CAP CAPACITOR 15 KVAR, HEAVY DUTY TYPE,440V, 50 HZ NEPTUNE/EPCOS POWER - 9 1

10 KVAR STEP 1 NOS



3 CAP CAPACITOR 10 KVAR, HEAVY DUTY ,440V, 50 HZ NEPTUNE/EPCOS POWER - 9 1

5 KVAR STEP 1 NOS

1 MCB MCB 16A, TP, 10KA, C-CURVE HAGER/SCHNIEDER 10 KA 1


3 CAP CAPACITOR 5 KVAR, HEAVY DUTY ,440V, 50 HZ NEPTUNE/EPCOS POWER - 9 1

4 IND/PB RED PUSH BUTTON 'START' 1 NO TYPE, 22.5 MM ; GREEN PUSH BUTTON 'STOP' 1 NC

TYPE, 22.5 MM INDICATING LAMP ON " RED " LED TYPE 230 V AC, 22.5 MM L&T 12

DIRECT CAPACITOR SECTION 2

25KVAR STEP 1 NOS




15KVAR STEP 1 NOS



3 CAP CAPACITOR 15 KVAR, HEAVY DURY - CAN TYPE, 440V, 50 HZ NEPTU

4,178,756 1.00 Each 4178756




PARTIULARS TOTAL


NE/EPCOS POWER - 9 1

10KVAR STEP 1 NOS




5KVAR STEP 1 NOS




3KVAR STEP 1 NOS




2KVAR STEP 1 NOS




C Out Door Lighting Panel

INCOMER

1 IND INDIACATING LAMP 'R' PHASE LED TYPE 240V AC 22.5 SQ.MM ABB/SCHNIEDER/C&S 22.5 MM LED 1

2 IND INDIACATING LAMP 'Y' PHASE LED TYPE 240V AC 22.5 SQ.MM ABB/SCHNIEDER/C&S 22.5 MM LED 1

3 IND INDIACATING LAMP 'B' PHASE LED TYPE 240V AC 22.5 SQ.MM ABB/SCHNIEDER/C&S 22.5 MM LED 1

4 IND INDIACATING LAMP 'ON' TYPE 240V AC 22.5 SQ.MM ABB/SCHNIEDER/C&S 22.5 MM LED 1

5 IND INDIACATING LAMP 'OFF' TYPE 240V AC 22.5 SQ.MM ABB/SCHNIEDER/C&S 22.5 MM LED 1

6 IND INDIACATING LAMP 'TRIP' TYPE 240V AC 22.5 SQ.MM ABB/SCHNIEDER/C&S

4,178,756

Each 49081 49,081

1.00 Each 4178756

1.00




PARTIULARS TOTAL


22.5 MM LED 1

7 SW CONTROL SWITCH 4A TECHNIC 6

8 MCB 63A FP MCB 10KA 'C' CURVE HAGER/ SCHNIEER 10KA 1

9 NONC TRIP ALARM CONTACT (1NO+1NC) HAGER/ SCHNIEER 10KA 1

OUTGOING



3 MCB 20A DP MCB 10KA 'C' CURVE HAGER/ SCHNIEER 10KA 1

4 CONN CONNECTOR ELMEX/SALZER 14

TIMER SECTION

1 TMR TIMER HAGER 24 HR 2


3 CONT 32A FP CONTACTOR ABB 2

SUB OUTGOING

1 MCB 6A SP MCB 10KA 'C' CURVE HAGER/ SCHNIEER 10KA 18

2 CONN CONNECTOR ELMEX/SALZER 18

SUB TOTAL - 4,227,837

SOR EARTHING, LOOP EARTHING

37.0 37.3 Earthing with G.I. Earth plate 600mm X 600mm X 6mm thick including accessories and providing

masonary encloser in cement mortor, cover plate having locking arrangment on the top and G.I. watering

pipe 20mm dia 2.7 Metre long etc. (but without charcoal or coke and salt ) complete as required. 16.00 Each 2951 47,216

38.0 37.4 Earthing with Copper Earth plate 600mm X 600mm X 6mm thick including accessories and providing

masonary encloser in cement mortor, cover plate having locking arrangment on the top and G.I. watering

pipe 20mm dia 2.7 Metre long etc. (but without charcoal or coke and salt ) complete as required. 16.00 Each 8013 128,208

39.0 37.5.1 Add Extra for using salt and charcoal / coke for G.I. Plate or

Copper plate earth electrode as required including

excavation & refilling. 32.00 Each 1841 58,912

40.0

37.6

Supplying and laying 8 SWG (4 mm) copper wire at 0.5

Metre below ground level as conductor earth electrode

including soldering etc. as required. 400.00

metre

85 34,000

41.0

37.7

Supplying and laying 6SWG (5.6mm) G.I. wire at 0.5 Metre

below ground level as conductor earth electrode including

soldering etc. as required. 1,500.00

metre

23 34,500

42.0

37.9

Supplying and laying 25mm X 6mm G.I. strip at 0.5 Metre

below ground level as strip earth electrode including

soldering etc. as required. 270.00

metre

113 30,510

Each 49081 49,081 1.00




PARTIULARS TOTAL


43.0 37.15 Providing and fixing 25mm X 4mm G.I. strip on surface or in

recessed/concealed for connection etc. as required. 300.00 metre 123 36,900

44.0 37.18 Supplying and laying 50mm X 6mm G.I. strip at 0.5 metre

below ground level / surface as strip earth electrode

including jointing etc. as required. 220.00

metre

95 20,900

45.0 37.23 Providing and fixing copper tape 20mm X 3mm thick on parapet and surface of wall of

lightening conductor as required ( for Horizontal runs ) 100.00 Each 368 36,800

46.037.32

Providing and laying G.I. tape 38mm X 6mm thick for earth

electrode directly in ground as required . 1,240.00 Each 161 199,640

-

SUB TOTAL 627,586

NON SOR EARTHING STRIP

47.0Supply & laying of hot dipped GI/pure copper earthing strip to connect to the DBS,Poles and equipments

in outdoor yard and also in indoor portion of substation.

A Copper strip 35x5mm 70.00 meter 1313.00 91,910

B Copper strip 50x5mm 110.00 meter 1866.00 205,260

TOTAL 297,170

SOR LIGHTING FIXTURES AND FANS

48.0 31.14 Supplying, fixing & testing of approved make of integral

type bollard cyclindrical shape housing cast aluminium

dome shape top cover fixed with cylindrical shape poly

carbonate cover having base plate with holes for direct

mounting complete with all accessories and control gear

box (without lamp) including preparatoion of foundation

including fixing with connection and all required material as

required.

A 31.14.2 LED 9 Watt Height > 700mm 10.00 Each 9214 92,140




PARTIULARS TOTAL


LED LIGHTING - -

49.0 31.28 Supplying and fixing integral post top lantern LED fitting

comprises of copper dust finish cast aluminium spigot and spun aluminium canopy fixed with opal

polycarbonate, pipe arrangement for vertical mounting, open construction driver and accessories

are wired up to terminal block. LED of 1 to 3 W each assembled on single MCPCB, having color

temp 6500K & having 50000 burning hrs life with minimum @ L 70, system lumen output should be

minimum with efficacy>80lm/W. LED driver PF 0.95 & surge protection 2KV. The colour rendering

index of LED light should be more than 70. Submission LM 80-08 Form LED Source Manufacturer

& LM79-08 / IS16106 from NABL approved lab. Manufacturer manadatory. i/c connection wire,

testing etc. to complete the job. 2 Yrs Guarantee certificate from manufacturer.

A 31.28.1 40 W LED 8.00 Each 16654 133,232

50.0 31.29 Supplying and fixing street light with high power LED of 1

to 3 W each assembled on single MCPCB, system lumens output with efficacy>90 lm/W. luminiare

having color temp

6500K & 50000 burning hrs life with minimum @ L 70,

The colour rendering index of LED light should be more

than 70. Luminiare comprises of driver, PF 0.95 & surge

protection 3KV. Housing made of pressure die cast

aluminium with heat resistant flat glass / Lens type, IP65

protection. Submission LM 80-08 Form LED Source

Manufacturer & LM79-08 / IS16106 from NABL approved

lab. Manufacturer manadatory i/c 50mm.dia G.I. Pipe

bracket upto 2 mtr. long in required angle/shape,

connection lead, testing etc to complete the job. 2 Yrs

Guarantee certificate from manufacturer.A 31.29.4 90W 20.00 Each 23923 478,460

51.0 31.30 Supplying and fixing flood light with high power LED of 1 to

3 W each assembled on single MCPCB, system lumens

output with efficacy>90 lm/W. luminiare having color temp

6500K & 50000 burning hrs life with minimum @ L 70,

The colour rendering index of LED light should be more

than 70. Luminiare comprises of driver, PF 0.95 & surge

protection 3KV. Housing made of pressure die cast

aluminium with heat resistant flat glass, IP65 protection.

Submission LM 80-08 Form LED Source Manufacturer &

LM79-08 / IS16106 from NABL approved lab.

Manufacturer manadatory i/c connection lead, testing etc

to complete the job. 2 Yrs Guarantee certificate from

manufacturer.

- -

A 31.30.6 150W 4.00 Each 34257 137,028

SUB TOTAL 840,860




PARTIULARS TOTAL


52.0 SOR FABRICATION WORK

A 42.36 Supply, fabrication and erection of Angle/Chanel/Flat iron

fitting for over head line & sub-station etc such as 'D'

bracket, cross arms, top clamp, 'V' cross arms,

Back/Support clamps or other similar work etc. including

nut bolts of required size, making holes, fabrication,

welding, cutting, etc. and painting with one coat of red oxide

paint & two coat of aluminium paint as required as per

specification.

4,650.00 KG 80 372,000

-

SUB TOTAL 372,000

SOR STREET LIGHTING SYSTEM

53.0 42.93 Providing and erecting hot dipped galvanized octagonal poles in single section made from 3mm

thick sheet having lockable weather proof flush door junction box complete erected in an approved

manner on provided foundation.Suitable size & type of foundation bolts 4 nos. 'J' type (EN8 grade)

- -

A 42.93.7 9 mtrs. Height, 155 X 70mm A/F, 260x260x16mm base plate, 4 nos. X 24 x 750mm bolt 16.00 each 24908 398,528

54.0 42.94 Providing and fixing of sword canopy type single arm GI bracket upto 2 Mtr. Long for 70mm A/F

top octagonal pole

16.00 each 3478 55,648

55.0 42.101 Designing & casting with M-20 reinforcement cement concrete foundation suitable for

Octagonal poles considering the safe soil bearing capacity at site as 10 T/sqm at 2 mtrs. Depth

including excavation, foundation nut P. bolts in an approved manner.

14.00 Cu.M 14435 202,090

42.12 Supplying and erection of water tight terminal box made of 16 SWG M.S. Sheet (1.6mm thick) i/c rubber

gasket of required size suitable for kit kat/ MCB/ Switch including 2 Nos. pole clamp of M.S. flat iron size

32x3mm, nut and bolts, 4 Pole epoxy connector nut & bolt type, 30Amp., 500Volt. The box shall be

powder coated. Excluding the cost of the Kit Kat/MCB/Switch complete as per specification.

42.12.1 20x15x10Cms. 14.00 each 730 10,220.00

A

41.1 Supply of XLPE Insulated power cable (conforming IS-7098 )

1100 Volt grade/Heavy duty power cable conforming to IS 1554- 1100 Volts grade , 2 core /3½ core/4

coreISI MARKED with Alu. Stranded /solid conductor -

A.1 41.1.10 ARMOURED 4 CORE - -

A.2 41.1.10.2 10 Sq.mm.(XLPE) 700.00 Metre 181 126,700

BRASS COMPRESSION GLAND -

56.0 41.5 Supplying and fixing heavy duty cable gland for P.V.C. insulated armoured cable with brass washer,

Rubber ring complete erected with cable and lead connection etc. as per specification complete. - -

A 41.5.2 Gland Size 22mm suitable for cable 2/3, 3½, 2/4 x 10

Sq.mm or 2x 16 Sq.mm 24.00 Each 46 1,104

B 41.21 Laying of one number armoured / unarmoured power

cable 1:1 kV grade of size not exceeding 25 Sq.mm in the

existing RCC Hume/Stone ware/G.I. pipe / surface in

existing trench as required.

700.00 Metre 25 17,500




PARTIULARS TOTAL


52.0 42.97 Providing and erecting black painted galvanized decorative

designer poles in different section, top 60mm dia., bottom

140mm dia. with gold colour painted ornamental cast

aluminium ring having lockable weather proof flush door

junction box in bottom section, base plate dia. 290mm

having 4 holes of 22mm dia. complete erected in an

approved manner on existing foundation. Suitable size &

type of foundation bolts 4 nos. X 16mm X 450mm 'J' type

(EN8 grade)

- -

A 42.97.1 3 Mtr. Height 8.00 Each 31323 250,584

TOTAL 1,062,374

NON SOR LIGHTING FIXTURES

53.0 LED BUSH Lights suitable for 3x1Watt LED lamp,230v complete with all accessories and lamp 20.00 Nos 4047 80,940

SUB TOTAL 80,940

54.0 SOR SLLEVE

19.80Providng And Laying Non- Pressure Np-2 Class (Light Duty) R.C.C Pipe With Collars Joined With Stiff Mixture Of

Cement Morter In The Proportion Of 1:2 (1 Cement : 2 Sand ) Including Testing Of Joint Etc. Complete: -

A 19.8.1 100 MM Dia R.C.C Pipe 15.00 Meter 243.00 3,645

B 19.8.2 150 MM Dia R.C.C Pipe 265.00 Meter 285.00 75,525

C 19.8.3 250 MM Dia R.C.C Pipe 10.00 Meter 385.00 3,850

D 19.8.4 300 MM Dia R.C.C Pipe 310.00 Meter 480.00 148,800

SUB TOTAL 231,820

NON SOR SLLEVE & CHAMBER

55.0 Making of brick chamber 200mm thick brickwall of size 1200mmx900mm ( internal) with 1000

mm depth (including ground PCC of 1:3:6 of 150mm , plastering of wall 20mm , 1:4 (internal or

external) as required , supply and installation of CI chamber cover with frame (medium duty) for

above sizes complete in all respect including all labour and material . The work also includes

excavation in hard soil making of brick chambers of above size and refilling around with soil and

disposing of balance soil outside for electrical cable.

5.00 No. 5894 29,470

56.0 Making of brick chamber 200mm thick brickwall of size 1200mmx900mm ( internal) with 750 mm

depth (including ground PCC of 1:3:6 of 150mm , plastering of wall 20mm , 1:4 (internal or

external) as required , supply and installation of CI chamber cover with frame (medium duty) for

above sizes complete in all respect including all labour and material . The work also includes

excavation in hard soil making of brick chambers of above size and refilling around with soil and

disposing of balance soil outside for electrical cable.

2.00 No. 5677 11,354




PARTIULARS TOTAL


57.0 Making of brick chamber 200mm thick brickwall of size 900mmx600mm ( internal) with 750 mm depth

(including ground PCC of 1:3:6 of 150mm , plastering of wall 20mm , 1:4 (internal or external) as required

, supply and installation of CI chamber cover with frame (medium duty) for above sizes complete in all

respect including all labour and material . The work also includes excavation in hard soil making of brick

chambers of above size and refilling around with soil and disposing of balance soil outside for electrical

cable.

16.00 No. 5014 80,224






cable.

1.00 No. 3620 3,620






cable.

16.00 No. 3620 57,920

SUB TOTAL 182,588

SOR CABLING WORK

60.0

41.1 Supply of XLPE Insulated power cable (conforming IS-7098 )

1100 Volt grade/Heavy duty power cable conforming to IS 1554- 1100 Volts grade , 2 core /3½ core/4

coreISI MARKED with Alu. Stranded /solid conductor -

A 41.1.8 ARMOURED 3.5 CORE -

A.1 41.1.8.6 120 Sq.mm(XLPE) 200.00 Metre 846 169,200

A.2 41.1.8.7 150 Sq.mm(XLPE) 100.00 Metre 1003 100,300

A.3 41.1.8.8 185 Sq.mm(XLPE) 100.00 Metre 1240 124,000

A.4 41.1.8.10 300 Sq.mm(XLPE) 1,000.00 Metre 1909 1,909,000

B 41.1.10 ARMOURED 4 CORE - -

B.1 41.1.10.4 25 Sq.mm(XLPE) - Metre 272 -

61.0 BRASS COMPRESSION GLAND -

A 41.5 Supplying and fixing heavy duty cable gland for P.V.C. insulated armoured cable with brass washer,

Rubber ring complete erected with cable and lead connection etc. as per specification complete. - -

A.1 41.5.6 Gland Size 45mm 3/3½ x120 Sq.mm, 3½ x95 Sq.mm, 3x150 Sq.mm. 6.00 Each 137 822

A.2 41.5.8 Gland Size 57mm 3 x 225 Sq.mm, 3 ½ x 185 Sq.mm 2.00 Each 244 488

A.3 41.5.9 Gland Size 70mm 3 x 240 Sq.mm, 3½ x 300 Sq.mm 52.00 Each 333 17,316




PARTIULARS TOTAL


62.0 41.6 Supplying and fixing ferrules. (Aluminium in Line connector) As per IS - specification suitable for following

size of cable with Aluminium stranded/solid conductor evently cramped with high pressure tool including

connection as required complete - -

For Conductor Size- - -

A 41.6.9 120.00 Sq.mm 6.00 Each 13 78

B 41.6.11 185.00 Sq.mm 2.00 Each 22 44

C 41.6.12 240.00 Sq.mm - Each 36 -

D 41.6.13 300.00 Sq.mm 52.00 Each 52 2,704

63.0 41.7 LUGS:- - -

A Supplying and fixing cramping type Alum. lugs as per I.S.S. Specification suitable for following size of

cable with Alu. /Copper solid/stranded conductor evently cramped with high/pressure tool and connected

to switch gear/Bus/M.C.C.B./ M.C.B. etc. as required complete.For Conductor Size- - -

A.1 41.7.6 95 Sq.mm 2.00 Each 16 32

A.2 41.7.7 120 Sq.mm. 18.00 Each 21 378

A.3 41.7.8 150 Sq.mm. 52.00 Each 30 1,560

A.4 41.7.9 180 Sq.mm. 6.00 Each 40 240

A.5 41.7.10 240 Sq.mm. 6.00 Each 55 330

A.6 41.7.11 300 Sq.mm. 157.00 Each 72 11,304

-

64.0 41.1 Providing & Making cable end termination with HEAT SHRINKABLE jointing kit complete with all

accessories including lugs suitable for 33 KV/11 KV 3 core XLPE alum. conductor cable as required as

per specification and as per accepted standard including connection testing complete. -

41.10.2 Heat shrinkable joint,kit 33 KV XLPE, 3 Core -

A 41.10.2.1 Heat shr.jointg. kit 33 KV XLPE cable O.D. termination -

A 3 x 185-240 sq.mm. 4.00 Each 31337 125,348

B 41.10.2.2 Heat shr.jointg. kit 33 KV XLPE cable I.D. termination - -

B 3 x 185-240 sq.mm. 6.00 Each 24135 144,810

65.0 41.12 Suppying & installing G.I. Pipe for protection of

underground cable fixed on wall/support/in trench/fixed

between two rigid existing support of wall/beam for

erection of ceiling Fan/down rod for stiff pendent for light

luminaries /fan/protective for earthing, lightening conductor

down strip/overhead service line/for submersible cable or

centrifugal pump for water supply with necessary iron

clamp coupler, bend, tee, elbow, nuts and bolts etc.

complete in an approved manner as required to complete

excluding cost of excavation/dismentalling & other finshed

masonary Item complete.

- -

41.12.1 For 'B' Class pipe ISI Marked (IS-1161-68) - Metre -

A 41.12.1.6 50.00mm 50.00 Metre 465 23,250




PARTIULARS TOTAL


B 41.12.1.9 100.00mm 40.00 Metre 1070 42,800

C 41.12.1.10 150.00mm 20.00 Metre 1753 35,060

-

66.0

41.13 Supply and laying rigid PVC single socket and, nonmetallic

pipe ISI Marked (IS-4985-2000) 10 Kg/sq.cm class

5 for protection of under ground cable/or for water pump

delivery side, for water supply complete with necessary

clamp coupler, band, Tee, Elbow etc. in an approved

manner excluding cost of excavation etc.

- -

A 41.13.1 50.00mm O.D 50.00 Metre 127 6,350

B 41.13.2 75.00mm O.D 20.00 Metre 295 5,900

C 41.13.3 110.00mm O.D 40.00 Metre 645 25,800

-

67.0 CABLE LAYING - -

B 41.22 Laying of one number armoured / unarmoured power

cable 1.1 kV grade of size exceeding 25 Sq.mm but not

exceeding 400 Sq mm in the existing RCC Hume /Stone

ware/G.I. Pipe/ surface in existing trench as required. 1,400.00 Metre 43 60,200

68.0 41.54 Supply and erection of hot dip G.I. cable tray perforation

not more than 17.5% for specific dimensions along with

tees, bends.. The cable tray shall be hang from ceiling/

fixed to wall with necessary angle/flat iron / hanging rod,

for ceiling suspensions, clamps, anchor fastner, nuts,

bolts, washers, not mor than 1.5 mtr. apart complete as

per specification to complete the job. The tray shall be as

follows :-

- -

A 41.54.1 100 x 50 mm x 1.6mm thick 10.00 Per Metre 495 4,950

B 41.54.2 150 x 50 mm x 1.6mm thick 10.00 Per Metre 572 5,720

C 41.54.3 300 x 50 mm x 1.6mm thick 20.00 Per Metre 844 16,880

D 41.54.4 450 x 50 mm x 2 mm thick 20.00 Per Metre 1296 25,920

E 41.54.5 600 x 50 mm 2 mm thick 20.00 Per Metre 1603 32,060

SUB TOTAL 2,892,844

NON SOR LT CABLING

69.0 Supply,Laying of cables in excavated trenches, concrete trenches, along walls, through hume pipes,

cable trays etc with testing & commissioning. The cable shall be 1.1 KV grade XLPE, copper

armoured of approved make as per following sizes The scope includes supply & fixing of aluminium

cable tags ( at every 6 Mts distance),clamps/saddles for dressing of cable/cable route

markers at every 7 Mtr. distance as per drawings, specifications & instructions of

consultant.

-

A 4Cx4 SQMM CUAR CABLE 300.00 meter 380 114,000

B 3Cx4 SQMM CUAR CABLE 200.00 meter 288 57,600




PARTIULARS TOTAL


C 24Cx2.5 SQMM CU.AR XLPE CABLE 150.00 meter 1071 160,650

D 12Cx2.5 SQMM CU.AR XLPE CABLE 150.00 meter 612 91,800

E 7Cx2.5 SQMM CU.UNAR XLPE CABLE 150.00 meter 416 62,400

F 4Cx2.5 SQMM CU.AR XLPE CABLE 500.00 meter 270 135,000

G 3Cx2.5 SQMM CU.AR XLPE CABLE 400.00 meter 220 88,000

H 3Cx2.5 SQMM CU UNARMOURED XLPE CABLE 300.00 meter 170 51,000

I 1Cx16 SQMM CU UNARMOURED XLPE CABLE 100.00 meter 282 28,200

70.0 Cable termination of armoured cables 1.1 KV grade including supply & installation of cable glands,

cable lugs (copper or aluminium single compression type), heat shrinkable sleeves on long ends,

crimping paste etc. The work includes testing & commissioning of cables, meggaring values &

submitting reports of tests. (One set includes termination of all cores of one end only)

- -

A 4Cx4 SQMM CUAR CABLE 6.00 Set 204 1,224

B 3Cx4 SQMM CUAR CABLE 14.00 Set 200 2,800

C 24Cx2.5 SQMM CU.AR XLPE CABLE 4.00 Set 244.00 976

D 12Cx2.5 SQMM CU.AR XLPE CABLE 4.00 Set 223 892

E 7Cx2.5 SQMM CU.UNAR XLPE CABLE 2.00 Set 213 426

F 4Cx2.5 SQMM CU.AR XLPE CABLE 22.00 Set 197 4,334

G 3Cx2.5 SQMM CU.AR XLPE CABLE 20.00 Set 195 3,900

H 3Cx2.5 SQMM CU.flexible CABLE 4.00 Set 174 696

I 1Cx16 SQMM CU.UNAR XLPE CABLE 4.00 Set 186 744

-

SUB TOTAL 804,642




PARTIULARS TOTAL


SUMMARY SOR

SOR OVERHEAD LINES 784,643

SOR EARTHING, LOOP EARTHING 627,586

SOR LIGHTING FIXTURES AND FANS 840,860

SOR FABRICATION WORK 372,000

SOR STREET LIGHTING SYSTEM 1,062,374

SOR SLLEVE 231,820

SOR CABLING WORK 2,892,844

SOR SUB TOTAL 6,812,127

SUMMARY NON-SOR

NON SOR 33KV HT CABLE 335,720

NON SOR 33KV HT VCB PANEL 1,344,460

NON SOR DISTRIBUTION TRANSFORMER 1,603,402

NON SOR SOALR SYSTEM 1,178,107

NON SOR DG SET 11,787,160

NON SOR BUSDUCT 334,251

NON SOR LT PANELS AND DB 4,227,837

NON SOR EARTHING STRIP 297,170

NON SOR LIGHTING FIXTURES 80,940

NON SOR SLLEVE & CHAMBER 182,588

NON SOR LT CABLING 804,642

NON-SOR SUB TOTAL 22,176,277

S.O.R. AMOUNT 6,812,126.80

NON S.O.R. AMOUNT 22,176,277.40

TOTAL PART-I (S.O.R. & NON S.O.R.) AMOUNT 28,988,404.20


Proposed Administrative / IT - MPAKVN

Documents

Transcript of Proposed Administrative / IT - MPAKVN