Print Catalog - Spec-West

1www.spec-west.com

In January 1991, my dad Bob and I set out to construct Spec-West. We wanted to build our company much like a concrete foundation with strong, solid family under-pinnings and guided by values like integrity, humility and initiative. Over these last 25 years we’ve had triumphs and challenges. We’ve received accolades and been humbled. But as the busi-ness world has changed and we’ve evolved, the one thing that has not changed is our vision for our success.

Our mission: To be much more than a “me-too” supply house, to be an unmatched concrete resource for our customers and a true partner to our manufacturers. All this we do in an envi-ronment of family and fun for our Stakeholders.

We believe these principals manifest in our attitude, our responsiveness and our absolute commitment to doing whatever it takes for our customers, our manufacturers and each other. We do what we say we’ll do, 100% of the time.These simple words and the Golden Rule drive our every move. We realized back in 1991 that ultimately we were in the people business. Thank you for the opportunity to prove it.

Sincerely,

Randall L. [email protected]

Locally Owned and Operated

Sacramento Loomis Chico 10054 Mills Station Road 3855 Taylor Road 2350 Park Avenue Sacramento, CA 95827 Loomis, CA 95650 Chico, CA 95928 ph: (916) 361-1300 ph: (916) 660-0140 ph: (530) 961-9999 fx: (916) 361-1381 fx: (916) 660-0142 fx: (530) 961-9995

Produced by “The Catalog Group,” a division of Western Catalog Group, Inc., Marthasville, Missouri. Unauthorized reproduction of this catalog, whole or in part, is strictly prohibited.

Table of Contents

2 Sacramento (916) 361-1300 • Loomis (916) 660-0140 • Chico (530) 961-9999

Division 2: Civil Engineering, SWPPP & Layout . . . . . . . . . . . . . . . . . . . . . .4-22Detectable Warning Systems • Geosynthetics • Erosion Control • Trench Drains • Catch Basins • Grates • Stringline Guidance System • Construction Laser • Marking Paint

Division 2.1: Swimming Pool Products . . . . . . . . . . . . . . . . . . . . . . . . . . . .24-28Cantilever Forms • Deck Drains & Accessories • Deck Joint Sealants • Deck Joint Fillers

Division 3.1: Concrete Forming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30-42Hand-Set Forming Systems • Scaffold Brackets • Gang Forming • Column Forms • Wall Cap Forms • Step Liners • Countertop Forms • Form Ties • Forming Accessories • Timberstrand • Form Boards • Dowels • Stakes

Division 3.2: Reinforcements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44-48Rebar Splicing System • Rebar Chairs • Rebar • Wire Mesh • Anchor Bolts • Nails • Curing Blankets

Division 3.3: Cast-In-Place Concrete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50-68Sealers • Curing Compounds • Hardeners • Retarders & Accelerators • Form Release • Bonding Agents• Expansion Joint • Joint Caps • Fasteners • Anchor Bolts • Holdowns • Foundation Straps • Column Bases • Grout• Repair Mortar • Vapor Barrier • Polyethylene Film • Screed Accessories • Duplex Screws • Sprayers • Concrete Testing

Division 3.4: Concrete Restoration & Surface Preparation . . . . . . . . . . . .70-90Substrate Restoration • Concrete Repair • Concrete & Masonry Products • Epoxy • Cracking Agent • AnchoringAdhesive • Mechanical Anchors • Diamond Blades • Diamond Cup Wheels • Saw & Grinder Accessories• Abrasives • Cleaners & Strippers • Asphalt Repair • Resurfacing

Division 3.5: Tilt-Up & Precast Concrete . . . . . . . . . . . . . . . . . . . . . . . . . . .92-94 Lift System • Coil Anchors • Wall Braces • Tilt-Up Forming System • Chamfer Cutters

Division 3.6: Decorative Concrete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96-128Sealers • Curing Compounds • Slip Resistant Additive • Cleaners • Release Agent • Concrete Stamps • Color Hardener • Antique Release • Integral Concrete Color • Concrete Stain • Stampable Overlay • Surface Deactivator • Finishing & Polishing • Efflorescence Remover • Strippers • Overlayments • Waterproof & Epoxy Coatings • Countertops • Pavers &Stones • Surface Protection • Dust Containment

Division 5: Metals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130Stair Nosings • Stair Treads

Division 7: Thermal & Moisture Protection . . . . . . . . . . . . . . . . . . . . . . .132-140Waterproofing • Bonding Agent • Waterstops • Caulking Guns

Safety & Personal Protection Equipment . . . . . . . . . . . . . . . .142-146Fall Protection • Eyewear • Hard Hats • Vests • Rainsuits • Boots • Gloves • Ear Plugs • Face Masks • Hydration• Rebar Caps • Flood Lights • Extension Cords • Tie-Downs • Beverage Coolers

Tools & Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .148-195Power Trowels • Blades & Pans • Compaction • Soff-Cut Saws • Soff-Cut Blades • Concrete Vibrator • Trash Pump• Rebar Cutter/Bender • Demolition Hammer • Impact Drivers • Angle Grinders• Worm Drive Saw • Wet/Dry Vacuum • Hammer Bits & Steel • Straight Edge • Hand Floats • Spreaders • Brackets & Handles • Bull Floats • Trowels &Screeds • Groovers & Edgers • Tampers • Chisels • Utility Stamps • Mixer Drills • Shovels • Scrapers • Brooms & Brushes • Marking Chalk & Line Reels • Tape Measures • Levels • Calculators • Pressure Washer • Wheelbarrow • Wet Polisher • Decorative Concrete Tools • Floor Finishing • Water Hoses • Sledges & Hammers • Bolt Cutters • Pry Bar

Rentals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196Single Waler Forming • Conventional Forming • Gang Forming • Miscellaneous Forming • Floor Scrubbers • Epoxy Guns • Shot Blasters • Power Washers • Tilt-Up Equipment • Concrete Stamps & Skins • Pounders • Soff-Cut Saws • PowerTrowels • Concrete Vibrators

Product Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .198-200

Job Start-up Check List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201

Many products available are not shown in this catalog . Call SPEC•WEST first .

3www.spec-west.com

DIVISION2Civil Engineering, SWPPP & Layout


Detectable Warning SystemsGeosynthetics

SWPPP / Erosion ControlTrench Drains

Catch Basins / GratesStringline Guidance System

Laser LevelsMarking Paint

Stuff It

DETECTABLEWARNING SYSTEMS

The New Generation of Tactile Detectable Warnings

Federal Yellow Onyx Black Dark Gray Light Gray Brick Red Ochre Yellow Pearl White Ocean Blue Colonial Red #33538 #17038 #36118 #26280 #22144 #23594 #37875 #15187 #20109

Available Colors

CAST IN PLACEThe traditional Cast in Place detectable warning tile is an ideal solution for tactile needs and boasts the lowest installation cost available. The integral embedment flang-es are the complete anchoring system and the tile is easily cut for angle or radius applications.

SURFACE APPLIEDA cost effective solution for retrofit applications or new construction, the Surface Applied tile is supplied as a complete system including the Tile, Adhesive, Fasteners and Sealant. The beveled perimeter edge ensures a smooth transition from the sub-strate to the detectable warning surface and meets ADA requirements. In addition, the Surface Applied tile is easily cut to conform to angle or radius ramps.

Available Sizes• Curb Ramps• Vehicular Ways• Parking Areas• Stairwells

The world’s largest selection of detectable warning products for:• Pedestrian Crossings• Escalator Approaches• Transit Platforms• Multi-Modal Transit

Tile Size Dome Spacing (in inches) (center to center in-line) 12” x 12” 1.67” 24” x 24” 1.67” 24” x 36” 1.67” 24” x 48” 1.67” 24” x 60” 1.67” 36” x 48” 2.35” 36” x 60” 2.35”

Sacramento (916) 361-1300 • Loomis (916) 660-0140 • Chico (530) 961-99993

DETECTABLEWARNING SYSTEMS

5www.spec-west.com

Introducing the ultimate solution™ in detectable warning systems.

CAST IN PLACE REPLACEABLE• Installs in minutes during cement finishing stage.• The replaceability feature of the tile is industry leading due to its simplicity and speed.• Tamper-proof, stainless steel fastener maintains flush interface with walking surface.• Corrosion resistant hexagonal anchors designed to entrap concrete for optimal anchoring.• Anchor and fastener material compositions allow for reliable and secure installations when multiple replacements are necessary.• Large interface between tile and anchor seat area maximizes support at each fastener location.• Multiple fastener locations to ensure full anchoring of tactile surface.• Structural spine ensures stiffness and strength.• Tiles shipped with removable protective plastic film to provide a clean surface after installation.• Interactive sizes – all tiles maintain pattern repeat when mounted side-to-side or top-to-bottom.

With 20 years of leading research insights and progressive product development experience, Access Products Inc. has combined proven poly-mer processing and material technologies with innovative and intelligent design features to create the ultimate in detectable warning tiles. Maximized efficiencies in manufacturing, materials sourcing and product specifications deliver the most cost-ef-fective solution in the industry.

exceptional valuereplaceabilityinstalls in minutessuperior performance

The power of intelligent design and precision engi-neering™

ADA COMPLIANCE• 2.35” center-to-center, in-line dome spacing meets ADA Federal and CA State requirements.• Truncated dome size and spacing compliant with ADA Federal and CA State requirements, 0.9”

base and 0.45” top diameter.• Fully complies with all ADA and OSHA requirements for surface height transitions to eliminate

trip hazards.• Consistent dome spacing when tiles are adjoined (side-by-side or end-to-end).• Wide in-line dome configuration facilitates a smooth rolling transition for strollers, wheelchairs

and walkers.

PRODUCT SIZES• 1’ x 1”• 2’ x 2’• 2’ x 3’• 2’ x 4’• 2’ x 5’• 3’ x 4’• 3’ x 5’

STANDARD COLORS

SURFACE APPLIED• Audible detectability technology engineered for sound amplification.• Engineered load transfer design with bosses located directly under domes transfer loads directly to sub-

strate.• Bevelled perimeter edge meets ADA vertical displacement requirements.• Strategically placed pre-formed fastener hole locations enhance installation integrity and provide easy

installation.• Tiles shipped with color-matched fasteners.• Adhesive location identified on reverse side of tile for easy, error-free installation.• Tactile Bond/Sealant is available at Spec-West. The system is designed and tested to be both a structur-

al adhesive and perimeter edge sealant.• Interactive sizes – all tiles maintain pattern repeat when mounted side-to-side or top-to-bottom.

DIVISIO

N2

DETECTABLE WARNING SYSTEMS

6

detectable warning ADA pavers

• ADA Pavers are State of California Title 24 compliant. • Standard thickness is 2” to 2 3/4”.• Weight: 24 to 33 lbs. per sq. ft. (Depending on thickness).

• Material: Pressed Concrete.• Standard sizes are 12” and 24”.

ADA-2, dome spacing 2 .35”

ADA-40 ADA-70 ADA-90 ADA-100

ADA PATTERN

SPECIFICATIONS

COLORS (Additional colors available upon request)

2.375”

2.375”“A”

1.125”

1.125”

23.813”

23.813”

24” ADA-2 PAVER

State of CaliforniaTitle 24 Compliant

12”

12”1.25”

1.25”

2.35”“A”

12” ADA-2 PAVER

PROPERTY VALUE TEST METHOD Compressive Strength =>8,000 psi Average ASTM C140 Flexural Strength =>800 psi Average ASTM C293 Water Absorption <6% ASTM C140 Freeze/Thaw =<1% loss of dry weight (50 cycles) ASTM 1262 Center Load 1,850 lbs. WTCL 99

Federal Yellow 33538


GEOTEXTILES

7www.spec-west.com

TerraTex® Nonwoven Geotextiles

TerraTex® Woven Geotextiles

TerraTex Nonwoven Geotextiles are designed and manufactured for many construction applications. They perform the three primary functions of a geotextile: Separation (separating the native subgrade from an aggregate layer); Reinforcement (reinforcing an area by distributing weight over a wider area); and Filtration (retaining soil while allowing the passage of water). TerraTex Nonwoven Geotextiles have a random, three dimensional pore structure and are highly water permeable as is necessary in many geotextile end uses. A range of fabric weights is offered to meet Standard drainage geotextiles which meet or exceed commonly specified DOT and commercial drainage protection requirements.

Extra-strength drainage geotextiles designed for applications requiring high water permeability and puncture resistance.

Heavyweight geotextiles for multiple applications: embankment protection, erosion control, ground stabilization, geomembrane underliner, railroad bed stabilization, heavy-duty drainage protection and separation.

TerraTex Woven Geotextiles are designed and manufactured for many construction applications. They perform the three primary functions of a geotextile: Separation (separating the native subgrade from an aggregate layer); Reinforcement (reinforcing an area by distributing weight over a wider area); and Filtration (retaining soil while allowing the passage of water). TerraTex Woven Geotextiles are made of polypropylene filaments which are formed into a stable network such that they retain their relative position. A range of geotextiles is offered to meet the requirements of various applications.

TerraTex GS

TerraTexHD

Industry-standard geotextile that performs the functions of separation and stabilization in marginal soil conditions. Grab tensile strength of 200 lbs.

Grab tensile strength of 315 lbs.Meets specifications set forth by AASHTO M288 for stabilization.

Roll Dimensions N03 N04 SD N04.5 N05 N06 N07 N08 N10 N12 N16Width (ft.) 12.5/15 12.5/15 12.5/15 12.5/15 12.5/15 15 15 15 15 15 15Length (ft.) 360 360 360 360 360 300 300 300 300 300 150Area (sq. yd.) 500/600 500/600 500/600 500/600 500/600 500 500 500 500 500 250Approx Wgt (lbs.) 145/170 160/190 160/190 190/225 200/240 205 235 265 320 380 265

Roll Dimensions GS HD Width (ft.) 12.5/17.5 12.5/17.5 Length (ft.) 432/309 360/258 Area (sq. yd.) 600 500 Approx Wgt (lbs.) 225/260 235/270

Both TerraTex Nonwoven and TerraTex Woven Geotextiles are made of specially formulated polypropylene to insure resistance to most soil chemicals, rot, mildew, acids and alkalies in a pH range from 3 to 12.

TerraTex® is a registered trademark of Leggett & Platt, Inc.

DIVISIO

N2

GEOGRIDS

8

TerraGrid® Biaxial Geogrids

TerraGrid® is a registered trademark of Leggett & Platt, Inc.

Reduced Aggregate Layer ThicknessBiaxial geogrids confine aggregate subjected to dynamic loads, restraining movement and effectively increasing the aggregate shear strength. In turn, vehicle-induced loads are spread more efficiently, producing reduced pressure on less competent subgrades. As a result, thinner layers of biaxial geogrid-confined aggregate result in comparable subgrade loadings to thicker, non-confined layers. With reduced aggregate quantities, along with associated reductions in transportation and placement expenses, immediate cost benefits often result.

Increased Structure LongevityWider load spreading and reduced subgrade stresses apply to conventional aggregate thicknesses as well. Using biaxial geogrids in conjunction with standard base depths routinely results in longer structure life and lowered life-cycle costs.

Optimized Performance and EconomyOften, optimization of structure life and economy results via biaxial geogrid use with intermediate aggregate thicknesses. To facilitate optimization, Hanes Geo provides BI-DESIGN, interactive software developed to assist contractors and engineers in selecting appropriate geogrids and aggregate thicknesses using conventional design practices.

For Economical Road, Rail and Similar Load Support Systems

Aggregate Confinement


SWPPP

YellowJacket Drain Inlet FilterFilter Bag – High strength woven geotextile.Strapping – Weather resistant 2” polypropylene webbing.Overflow – 4 overflow portals built into each unit.Flow Rate – 200 gpm (gallons per minute).Dimensions – 4 sizes available to fit most storm drains.Maintenance – Remove with built-in straps, clean filter and replace.

2’x2’ • 2’x3’ • 2’x4’ • 3’x4’(Custom sizes available)

9www.spec-west.com

D-Watering BagUse – Separate sediment from pumped water.Material – 8-ounce non-woven geotextile.Strapping – Weather resistant 2” polypropylene webbing.Input Sleeve – Designed to accommodate several hose diameters.Installation – Quick and easy with heavy-duty webbing and d-rings sewn to the sleeve.Integrity – Sewn with a 4-thread lockstitch hem and additional perimeter lockstitch using high strength, marine-rated poly thread.

3’x4’ • 4’x6’ • 6’x9’ • 10’x10’ • 10’x15’(Custom sizes available)

Above Ground Grated Filter 2 (AGG2)Use – Ideal for combo drain inlets and surface only drain inlets.Filter Bag – High strength woven geotextile.Filtering Media – High strength woven geotextile - Aspen wood excelsior.Overflow – Built in portal allows faster flow-thru during heavy storms.Installation – Hold in place with gravel bags or heavy-duty wire.UV Rating – 85% with 364º flammability point.Flow Rate – 180 gpm (gallons per minute).

40” x 27”(Custom sizes available)

Silt Sifter® BagUltimate Solution – dual-component, bag-within-a-bag design.Outer Material – High density polyethylene - Poly thread (4) lock stitching.Filtering Media – Aspen wood excelsior (captures silt, sediment and soils).Weight (Dry) – ~35 lbs. - 3/8” pea gravel (filled).UV Rating – 85% - 364º flammability point.Maintenance – Clean with power wash or strong hose.

30”L x 16”W x 6”H

Sand Bags / Bird’s Eye Gravel BagsDurability/Consistency – Each bag is sewn shut.Weight – 30 lbs. sand (washed) / 30 lbs. 5/16” gravel.Uses – On construction sites and emergency situations, along streams and channels, down slope of exposed soil areas, around stockpiles, to divert or direct water flow, create a temporary sediment basin, or across ditches and swales.

14”W x 26”L (Empty)

DIVISIO

N2

SWPPP

10

Stuff It

Bio-Burlap WattleThe Rice Straw Fiber Roll with Burlap Cover is manufactured from certified weed-free California rice straw placed into a durable burlap tube at carefully controlled density. Its density allows it to perform as an effective filtering device without excessive water damming, which can cause premature over topping and increased soil loss. Since it is completely bio-degradable, materials turn into mulch as vegetation takes hold, without plastic fiber.

Features• Reduces total runoff. • Reduces sediment loss and pollution of receiving waterways. • Prevents blockage and reduces maintenance of storm water conveyances. • Easy, low cost installation and maintenance. • Utilizes renewable resources. • Various sizes available. • Completely biodegradable.• Effective as a sediment filtering device.

SpecificationsBrand ................................................................... HSIDiameter ............................................................. 9 in.Material ....................................Biodegradable FabricType ......................................................................... 0Density ................................................... 10 oz./sq.-ft.Length................................................................ 25 ft.Usage ............................................ For Toe of Slope, Channels, Site Perimeter

A Guide to Straw Wattle InstallationProper installation of straw wattles is essential in order to ensure the success of the product, and to conform with SWPPP best practices. When installing on slopes, wattles should be installed on contour with a slight downward angle at the end of the row in order to prevent ponding at the mid-section. No overall slope preparation is needed prior to installation; however, straw wattles should always be installed in shallow trenches according to these guidelines. Running multiple lengths of wattle the ends should be abutted firmly to ensure no leakage at the connection.Spacing on a Downslope: In an area with a 1-to-1 slope, or 1’ vertical change per 1’ of horizontal distance, plan to space wattle rows no more than 10’ apart. If an area has a 4-to-1 slope gradient, space rows of wattle about 40’ apart. For soft, loamy soils adjust the spacing closer together. For hard, rocky soils adjust the rows further apart.Trenching: Dig a 2- to 3-inch trench if the soil is hard and rocky or a 3- to 5-inch trench if the soil is soft and loamy. Installing: Lay straw wattle snugly in the trench. No daylight should be seen under the wattle. Pack soil from trench-ing against the wattle on the uphill side. Where more than one wattle is needed to complete a line, ensure that the ends of the two sections of wattle touch each other tightly. Drive a wooden stake perpendicular to the ground, into each end of the wattle and then every 4’ on center. Wooden stakes should be 18 to 24 inches long and either 1-by-1 inch or 1-by-2 inches wide. For flat installations along sidewalks or behind curbs it may not be necessary to stake the wattles, however, trenches must still be dug. For installations around storm drains and inlets, trenches and staking will be needed.


TRENCH DRAINS

11www.spec-west.com

Z882 Perma-Trench HDPE 12” Drain System

Z882 Dimensional Data

Approx. Wt.Trench Shallow Invert Deep Invert Max. Flow Rate (Less Grate)Number Inches mm Inches mm GPM LPS CFS Lbs. Kg8201 6.25 159 7.25 184 557 35 1.241 68 30.88202 7.25 184 8.25 210 774 49 1.725 68 30.88203 8.25 210 9.25 235 999 63 2.226 70 31.8 8203N 9.25 235 9.25 235 – – – 71 32.28204 9.25 235 10.25 260 1232 78 2.745 72 32.78205 10.25 260 11.25 286 1468 93 3.271 75 34.08206 11.25 286 12.25 311 1709 108 3.808 77 34.98206N 12.25 311 12.25 311 – – – 78 35.48207 12.25 311 13.25 337 1951 123 4.347 79 35.88208 13.25 337 14.25 362 2196 139 4.893 80 36.38209 14.25 362 15.25 387 2443 155 5.443 83 37.78209N 15.25 387 15.25 387 – – – 84 38.18210 15.25 387 16.25 413 2691 170 5.996 85 38.68211 16.25 413 17.25 438 2940 186 6.551 87 39.58212 17.25 438 18.25 464 3189 202 7.106 89 40.4

Features and Benefits• 8’ Modular Sections with 24” Grates. • 1.04% Built-In Slope – Handles greater flows, uniform slope.• Radiused Bottom – Better flow rate, less solids build-up.• Smooth High Density Polyethylene Structural Composite Interior – 0% water absorption.• Durable and Lightweight – Strong corrosion-resistant material.• Extra Long Runs – Sidewall extensions allow pre-slope runs up to 288 feet.• Variety of Gratings.• Grate Options – Available in H-20, FAA, ADA.

Closed End Cap(E1)

End Outlet(4”, 6”, 8” NH)

Bottom Outlet(4”, 6”, 8” NH)

Installation Specifications

9-1/4” Throat / 12” Overall Width, Consult Plans and Specifications

Engineering Specification Channels shall be 8’ long, 12” wide and have a 9-1/4” wide throat. Modular channel sections shall be made of High Density Polyethylene (HDPE), have interlocking ends and radiused bottom. Channel shall be provided with no slope (neutral) or with a 1.04% built-in slope. Channels shall be available with inverts ranging from 6.25” to 18.25”. Channels shall have clips molded into the sidesof the channel to accommodate vertical rebar for positioning and anchoring purposes. Choice of class A, B, C, D, E and F grates shall be available with H-20 and/or FAA load ratings and/or ADA compliance with mechanical lock-down devices. A heavy-duty steel frame shall be provided to distribute weight between the grates and the HDPE channel. End caps and catch basins shall be available to complement the channels and grates. End outlets, bottom outlets and side outlets shall be available in 4”, 6” and 8” diameters. Trench drain shall be Flo-Thru model Z882. For downloadable CSI format specification, visit www.zurn.com.

Applications• Highways• Airports• Airplane Hangars• Parking Lots• Gas Stations• Industrial Parks• Chemical Plants• Food Processing• Industrial Plants• Pharmaceuticals• Port Facilities• Water Parks

IntegralRebar Clips

Mechanical OverlapConnection

Frame AssemblyWith Anchor Studs

90°Fabrication

TeeFabrication

Z882 System Highlights

Grate

End Cover

Grate LockdownHardware

FrameAssembly

DIVISIO

N2

TRENCH DRAINS

12

Z886 Perma-Trench HDPE 6” Drain System

Features and Benefits• 80” Modular Channel Sections with 20” or 40” Grates. • .75% Built-In Slope – Handles greater flows, uniform slope.• Radiused Bottom – Better flow rate, less solids build-up.• Smooth High Density Polyethylene Structural Composite Interior –

0% water absorption.• Durable and Lightweight – Strong corrosion-resistant material.• Extra Long Runs – Sidewall extensions allow pre-slope runs up to 300 feet.• Variety of Gratings.• Grate Options – Available in H-20, FAA, ADA.


Approx. Wt.Trench Shallow Invert Deep Invert Max. Flow Rate (Less Grate)Number Inches mm Inches mm GPM LPS CFS Lbs. Kg8601 3.50 89 4.10 104 93 6 0.207 14 6.28602 4.10 104 4.70 119 122 8 0.272 15 6.88603 4.70 119 5.30 135 152 10 0.339 16 7.48603N 5.30 135 5.30 135 – – – 17 7.78604 5.30 135 5.90 150 183 12 0.408 18 8.38605 5.90 150 6.50 165 214 14 0.477 20 8.98606 6.50 165 7.10 180 245 16 0.546 21 9.58606N 7.10 180 7.10 180 – – – 22 10.08607 7.10 180 7.70 196 276 17 0.615 23 10.68608 7.70 196 8.30 211 308 19 0.686 25 11.28609 8.30 211 8.90 226 339 21 0.755 26 11.88610 8.90 226 9.50 241 371 23 0.827 27 12.48611 9.50 241 10.10 257 403 26 0.898 29 13.08612 10.10 257 10.70 272 435 28 0.969 30 13.68612N 10.70 272 10.70 272 – – – 30 13.68613 10.70 272 11.30 287 467 30 1.041 31 14.28614 11.30 287 11.90 302 498 32 1.110 33 14.88615 11.90 302 12.50 318 530 34 1.181 34 15.4

Closed End Cap(E1)

End Outlet(2”, 3”, 4”, 6”, NH)

Bottom Outlet(2”, 3”, 4”, 6”, NH)

Applications• Highways• Driveways• Kitchens• Pools• Parking Lots• Gas Stations• Airports• Airplane Hangars• Industrial Parks• Chemical Plants• Food Processing• Shopping Malls• Industrial Plants• Pharmaceuticals• Amusement Parks


4” Throat / 6-1/4” Overall Width, Consult Plans and Specifications

Engineering Specification Channels shall be 80” long, 6-1/4” wide, and have a 4” wide throat. Modular channel sections shall be made of High Density Polyethylene (HDPE), have interlocking ends and radiused bottom. Channel shall be provided either flat (neutral) or with a .75% built-in slope. Channels shall be available with inverts ranging from 3.5” to 12.50”. Channels shall have clips molded into the sides of the channel to accommodate vertical rebar for positioning and anchoring purposes. Choice of class A, B, C, D, E and F grates shall be available with H-20 and/or FAA load ratings and/or ADA compliance with mechanical lockdown devices. End caps and catch basins shall be available to complement the channels and grates. End outlets, bottom outlets and side outlets shall be available in 2”, 3”, 4” and 6” diameters. Trench drain shall be Flo-Thru model Z886. For downloadable CSI format specification, visit www.zurn.com.

IntegralRebar Clips

Optional -HD FrameAssembly

90°Fabrication

TeeFabrication


-DGC Grate

Grate LockdownHardware

Mechanical OverlapConnection


TRENCH DRAINS

13www.spec-west.com

Z883 Perma-Trench 6” Shallow Drain System

Z884 Perma-Trench 4-3/4” Shallow Drain System

Features and Benefits• 40” Modular Channel Sections with 20” or 40” Grates.• Smooth Seamless Construction – Clean, sanitary installation.• Durable and Lightweight – Strong corrosion-resistant material.• 3-1/2” Trench Depth – For depth restricted applications.• Variety of Gratings – Able to meet specific job requirements.• Grate Options – Available in ADA.• Optional – Stainless veneer frame.

Closed End Cap (E1) End Outlet (2” NH) Bottom Outlet (2”, 3”, 4” NH)

Grate

Applications• Sidewalks• Kitchens• Pools• Residential


Overall Depth Approx. Wt.Top C Minimum D Minimum (Less Grate)Size Inches mm Inches mm Lbs. Kg883 3.5 88.9 3.5 88.9 4 1.8

Engineering Specification Channels shall be 40” long, 6” wide and have a 4” wide throat. Modular channel sections shall be made of polypropylene, have interlocking ends and radiused bottom. Channel shall be provided flat (neutral) with a 3-1/2” invert. Channels shall have clips molded into the sides of the channel to accommodate vertical rebar for positioning and anchoring purposes. Choice of class A, B and C grates shall be available with H-20 and/or ADA compliance with mechanical lockdown devices. End caps and catch basins shall be available to complement the channels and grates. End outlets in 2” diameter and bottom outlets in 2”, 3” and 4” diameters shall be available. Trench drain shall be Flo-Thru model Z883. For down-loadable CSI format specification, visit www.zurn.com.


4” Throat / 6” Overall Width, Consult Plans and Specifications

Features and Benefits• 40” Modular Channel Sections with 20” or 40” Grates.• Smooth Seamless Construction – Clean, sanitary installation.• Durable and Lightweight – Strong corrosion-resistant material.• 2-7/8” Trench Depth – For depth restricted applications.• Variety of Gratings – Able to meet specific job requirements.• Grate Options – Available in ADA.• Optional – Stainless veneer frame.

Closed End Cap (E1) End Outlet (2” NH) Bottom Outlet (3” NH)

HPP Grate

Applications• Sidewalks• Kitchens• Pools• Residential


Overall Depth Approx. Wt. (Less Grate)Number Inches mm Lbs. Kg884 2.875 73 2.3 1.04

Engineering Specification Channels shall be 40” long, 4-3/4” wide and have a 3-1/4” wide throat. Modular channel sections shall be made of polypropylene, have interlocking ends and radiused bottom. Channel shall be provided flat (neutral) with a 2.875” invert. Channels shall have clips molded into the sides of the channel to accommodate vertical rebar for positioning and anchoring purposes. Choice of class A, B and C grates shall be available with H-20 and/or ADA compliance with mechanical lockdown devices. End caps and catch basins shall be available to complement the channels and grates. End outlets in 2” diameter and bottom outlets in 3” diameter shall be available. Trench drain shall be Flo-Thru model Z884. For downloadable CSI format specification, visit www.zurn.com.


3-1/4” Throat / 4-3/4” Overall Width, Consult Plans and Specifications

DIVISIO

N2

GRATES

14

6” Grates 12” Grates

Grate No. ...................................................................DGC Material ........................................................... Ductile Iron DIN Rating .............................................................Class C Weight lb. per ft. ..........................................................6.36 Open Area sq. in. per ft. ............................................18.57 ANSI Rating .....................................................Heavy Duty Application ........................... Truck Traffic, Pneumatic Tire

Grate No. ...................................................................DGE Material ........................................................... Ductile Iron DIN Rating ............................................................. Class E Weight lb. per ft. ..........................................................6.36 Open Area sq. in. per ft. ............................................18.57 ANSI Rating ................................................... Special Duty Application .........................Dynamic Loads, Forklift Traffic

Grate No. ......................................................................FG Material .................................................. Galvanized Steel DIN Rating ............................................................. Class B Weight lb. per ft. ..........................................................1.68 Open Area sq. in. per ft. ............................................13.68 ANSI Rating ....................................................... Light Duty Application ............................................. Pedestrian Traffic

Grate No. ..................................................................... PG Material .................................................. Galvanized Steel DIN Rating ............................................................. Class A Weight lb. per ft. ..........................................................1.65 Open Area sq. in. per ft. ..............................................7.17 ANSI Rating ....................................................... Light Duty Application .............................Heelproof Pedestrian Traffic

Grate No. ................................................................... HPPMaterial ................................... High Density PolyethyleneDIN Rating ............................................................. Class BWeight lb. per ft. ..........................................................0.90Open Area sq. in. per ft. ..............................................14.5ANSI Rating ....................................................... Light DutyApplication ..................Pedestrian, Chemical & Swim Pool

Grate No. ...................................................................DGC Material ........................................................... Ductile Iron DIN Rating .............................................................Class C Weight lb. per ft. ........................................................21.00 Open Area sq. in. per ft. ............................................57.50 ANSI Rating .....................................................Heavy Duty Application ................................................ Vehicle & Truck

Grate No. ..................................................................... BG Material .................................................. Galvanized Steel DIN Rating .............................................................Class D Weight lb. per ft. ........................................................13.30 Open Area sq. in. per ft. ..........................................101.00 ANSI Rating .....................................................Heavy Duty Application ................Heavy Loads Forklift & Truck Traffic

Grate No. ...................................................................DGE Material ........................................................... Ductile Iron DIN Rating ............................................................. Class E Weight lb. per ft. ........................................................21.50 Open Area sq. in. per ft. ............................................57.00 ANSI Rating ................................................... Special Duty Application .....................Hard Wheel Forklift, Truck TrafficAdditional Grates available upon request.

Please contact Spec•West.Transportation ClassificationsThe AASHTO (American Association of State Highway and Transportation Officials) “Standard Specification for Highway Bridges” defines H-20 loading as a two-axle truck with a maximum dual-wheel load of 16,000 pounds. HS-20 loading is defined as a tractor truck with a tandem axle semi trailer with a dual-wheel load of 16,000 pounds.The FAA (Federal Aviation Administration) Advisory Circular AC 150/5320-6D describes aircraft loading as 100,000 pounds placed over a 9” x 9” area.The Americans with Disabilities Act stipulates that the slot width be limited on gratings in walkways and elongated slots must be placed longitudinally so they are perpendicular to the dominant direction of travel.

Grate Top Loading ClassificationsTwo grate classification systems are shown to assist in grate selection. Both standards are used in the trench drain industry to choose the proper grating to meet loading requirements.6.1 ANSI A112.21.1MGrates and top rims shall be designed to meet the following loading classifications:6.1.1 Light Duty – All grates having safe live load (as calculated inparagraph 6.2.5) under 2,000 lbs. [900kg].6.1.2 Medium Duty – All grates having safe live load (as calculated inparagraph 6.2.5) between 2,000 lbs. [900kg] and 4,999 lbs. [2,250kg].

6.1.3 Heavy-Duty – All grates having safe live load (as calculated inparagraph 6.2.5) between 5,000 lbs. [2,250kg] and 7,499 lbs. [3,375kg].6.1.4 Extra Heavy-Duty – All grates having safe live load (as calculatedin paragraph 6.2.5) between 7,500 lbs. [3,375kg] and 10,000 lbs. [4,500kg].6.1.5 Special Duty – Grates having safe live load (as calculated in paragraph 6.2.5) over 10,000 lbs. [4,500kg] shall be considered special and treated accordingly.6.2 DIN 19580Grates and top rims shall be designed to meet the following load classifications:6.2.1 Classification A – Grate design load up to or exceeding3372 lbf [15kn].6.2.2 Classification B – Grate design load of at least 28101 lbf [125kn].6.2.3 Classification C – Grate design load of at least 56202 lbf [250kn].6.2.4 Classification D – Grate design load of at least 89924 lbf [400kn].6.2.5 Classification E – Grate design load of at least 134885 lbf [600kn].6.2.6 Classification F – Grate design load of at least 202328 lbf [900kn].The maximum safe live load is computed by dividing the load at failure by two.

In areas of extreme hard wheel forklift traffic (i.e. steel wheels), the Zurn-HD Frame Assembly is recommended.

1’ - 8”

3’ - 4”

3’ - 4”

5-3/8”

5-3/8”

3/4”

3/4”

5-3/8”

3/4”

1’ - 8”

5-3/8”

3/4”

1’ - 8” 3/4”

5-3/8”

24”

24”

24”

11½”

11½”

11½”

1½”

1½”

1½”


TRENCH DRAINS /CATCH BASINS

15www.spec-west.com

Z880 Perma-Trench HDPE 2-1/2” Wide Drain System

Features and Benefits• 48” Modular Channel Sections with 24” Grates.• Durable and Lightweight.• 3” Trench Depth.• Prefabricated 45’s and 90’s.• Five Standard Colors – Gray, Brick Red, Blue, Sand and White.• Grate Options – Heel-Proof Polyethylene Grate (-POG), Bronze

Decorative Grate (-BZ), Aluminum Decorative Grate (-AOG), Aluminum Wire Grate (-AWG) and Stainless Steel Wire

Grate (SWG).


Overall Depth Approx. Weight C Minimum D Maximum (Less Grate)Top Size Inches mm Inches mm Lbs. kg880 3.0 76.2 3.0 76.2 4 1.8


DIVISIO

N2

Z887 Perma-Trench Catch BasinsFeatures and Benefits• 6” x 20” Catch Basin – The 6” x 20” basin is meant to be used

as an in-line sump for applications where, from the top surface, the visual appearance is of continuous 6” wide Z886 trenching. Simply trace and cut the trench section to be connected into the end of the basin, insert into the basin, bolt together and caulk around the exterior.

• 12” x 24” and 24” x 24” Catch Basins – The larger catch basins, 12” x 24” x 24” and 24” x 24” x 24”, provide greater sump capac-ities for larger trench runs. These catch basins can be used with Z882 and Z886 trenches. These basins have an external trench adapter supplied to make the transition between the trench and basin. This adapter, along with the hardware, is supplied by Zurn to make a fast and easy connection to any basin. Additional adapters can be used to make numerous connections of trench into the catch basin.

• Basin Extension for 24” x 24” –This 12” polyethylene extension for 24” x 24” catch basin provides greater depths and capacities. These stackable units allow for depths in 12” increments.

24” x 24” Catch Basin with Z886 Connecting Trench



24” x 24” Catch Basin with 12” High Basin Extension



Overall Top Dimensions Approx. Wt. Length Width (Less Grate)Basin Inches mm Inches mm Lbs. Kg6 x 20 20-3/4 527 5-1/4 159 17.0 7.712 x 24 23-1/4 591 12 305 14.6 6.624 x 24 23-1/4 591 24-5/8 625 19.9 9.0

TRENCH DRAINS

16

Pre-Sloped Radius ChannelsStandard PolyDrain channels have a built-in 0.6% slope with a smooth radius bottom and a narrow cross section. These features provide excellent hydraulic efficiency. Without any site slope, a 3.5 feet per second velocity is obtained when the channels are flowing full.

• ABT’s polyester polymer concrete Polydrain products carry the UL-723 Classified mark for Class A fire rating.

• Polydrain is highly chemical resistant including salt, oil, gas, sewage, most acids and most alkalis.

• Polydrain’s polymer concrete channel offers superior strength and durability as well as marked cost advan-tages over alternative materials.

Grate Locks

Catch Basin

PolyDrain Channel

Outlet

Grating

End Plate

Inlet/Outlet

TypicalPolyDrain System

PolyDrain channels are a nominal meter (39.19”, 3.27’) long. Standard channels have a 0.6% built in slope. The 30 standard channels are positioned sequentially in numerical order from 010 to 300, creating a continuously sloped channel run. Channel runs can be designed with intersections or miters and fabricated onsite. Runs of almost any length are possible by varying outlet placements, integrating non-sloping channels and using PolyWall Sidewall Extensions for increased depth.

PolyDrain®

2410 Perforated Heel-Proof GrateMaterial .......................Galvanized PerforatedLength...............................................39.19 in.Weight ...................................................6 lbs.Load Class .............................. A (Light Duty)Application ......................... Pedestrian Traffic

2412 Reinforced PerforatedHeel-Proof GrateMaterial ............................... Galvanized SteelLength...............................................39.19 in.Weight ...................................................8 lbs.Load Class ............................ C (Heavy-duty)Application .................................. Commercial

2420 Slotted Steel GateMaterial ............................... Galvanized SteelLength...............................................39.19 in.Weight ...................................................6 lbs.Load Class ......................... B (Medium Duty)Application ...................................................... ....................Sidewalks & Residential Parking

2502 Slotted GrateMaterial ........................................ Ductile IronLength...............................................19.60 in.Weight ...................................................8 lbs.Load Class ..............E (Extreme Heavy-duty)Application ........................................................................Hard Tire Forklift, Heavy Vehicles

2506 Ornamental GrateMaterial .................Ductile Iron “Herringbone”Length...............................................19.60 in.Weight ...................................................7 lbs.Load Class ..............E (Extreme Heavy-duty)Application ........................................................................Hard Tire Forklift, Heavy Vehicles

2510 Ductile Iron FrameMaterial ........................................ Ductile IronLength...............................................19.60 in.Weight ...................................................9 lbs. Shown with

Ductile Iron Grate

Underside

PolyDrain’s Small Catch Basins have the same outside dimensions as standard PolyDrain channels. Designed to accept sidewall exten-sions, they can be positioned any place in a channel run. PolyDrain small catch basins are available with easy-to-remove stainless or galvanized steel trash buckets and can accept the full range of lock-able inlay or frame-and-grate systems. Available with foul air traps when required.

PolyDrain’s Large Catch Basins are designed to accept large volumes of fluids. Removable stainless or galvanized steel trash buckets are available and a cast iron grate and frame is included. Catch basins are 19.6”l x 12.8”w and have preformed cutouts for insertion of channels and 6” outlets on all four sides of the basin (other pipe sizes can be fitted to the catch basin as required). They have a stackable design which allows for installation to any required depth.

Bottom Platewith PVCOutlet


TRENCH DRAINS

17www.spec-west.com

TrenchFormer is a trench forming system that utilizes standard metal components and customizable forming sections. Its components are made in the most commonly constructed sizes.They have integral deforming grooves for easy removal. The steel angle rails include anchoring studs welded on predeter-mined centers to the outside corners. U-shaped no-float legs (#4 rebar) attach to rail clamps on each rail. Each rail end is designed to accept a rail clamp which connects adjacent rail segments.Prefabricated L-rail and T-rail assemblies allow for field instal-lation of 90° turns anywhere in the pre-sloped layout.Outlet piping is butted to an annular groove made in the EPS form prior to concreting. For trench junctions or for large outlet sizes, four catch basins are available.

TrenchFormer® TFX 6”-24” – The Most Versatile Trench Drain System on the Market

#208 Banded Bar Grating12.208C.FG Trench Width ....................... 8” Load Class .......................................310 psi Grate Length .......................................... 24” Weight ...............................................19 lbs.

#502 High Intake Slotted08.502F.GB Trench Width ....................... 8” Load Class ....................................1235 psi. Grate Length ..................................... 19.64” Weight ...............................................18 lbs.12.502D.FB Trench Width ..................... 12” Load Class .......................................494 psi Grate Length .......................................... 18” Weight ............................................26.1 lbs.12.502E.GB Trench Width ..................... 12” Load Class .......................................620 psi Grate Length ..................................... 19.64” Weight ...............................................36 lbs.

#504 8” Slotted ADA08.504F.FE Trench Width ........................ 8” Load Class .....................................1235 psi Grate Length .......................................... 16” Weight ...............................................21 lbs.

#504 12” Slotted ADA12.504G.FB Trench Width ..................... 12” Load Class .....................................2469 psi Grate Length .......................................... 18” Weight ...............................................51 lbs.

#506 8” Slotted ADA (Heel Proof)08.506F.GB Trench Width ....................... 8” Load Class .....................................1235 psi Grate Length ..................................... 19.64” Weight ...............................................24 lbs.

#601 Solid Cover24.601D.FB Trench Width ..................... 24” Load Class .......................................494 psi Grate Length .......................................... 24” Weight .............................................181 lbs.

1900 series catch basins are the same trench width and are 24-inch long flat bottom units, manufactured in 24- and 36-inch depths. They utilize 24-inch long rails, standard TrenchFormer grates, locking devices, and end rails.

WasherCross Tie

Rain Clamp

Set Screw

Standard Rail

Anchor Stud

Grate

Lock Toggle

Square Nut

Deform Groove

End Rail

No-FloatLegs

EPS Foam Former

ConnectionScrews

Bolt

8’-0”

TrenchFormer Catch Basins are available in both the 1600 and 1900 series. The catch basins can be used at any point throughout a trench run as well as termination point or a stand alone area drain. Both series utilize deforming grooves and a no-float leg system. The components are color coded for easy installation.

The 1600 series catch basins are 21”W x 24”L and are avail-able in both 24- and 36-inch depths. This series uses two 24-inch long frame rails and two end frames and C.I. grate.

Special End Rail - If a 1600 series catch basin is used at the end of a trench run, brackets connect to rail end frames. This aligns and retains the end of the trench rails for a secure and precise fit.

#208

#502

#504 - 8”

#504 - 12”

#506

#601

Ease of Installationu The system is installed by the suspension method using no-float legs. u Installing the system does not require heavy equipment, expensive highly-skilled labor, keyways,

or water stops, saving 33% or more.

DIVISIO

N2

TRENCH DRAINS

Mini Channel™ DrainsExcellent for light-duty applications including residential pools, concrete and paver patios, spas and tennis courts .

18

Part Pkg . Wt . Ea . Prod . No . Description Color Qty . (lbs .) Class Specifications 529 S/s Screws, FH #4 x 5/8” Steel 64 0.10 25PF

540 3’ Channel Grate White 48 ft. 0.66 25PF

541 3’ Channel Grate Gray 48 ft. 0.66 25PF

542 3’ Channel Grate Green 48 ft. 0.66 25PF

543 3’ Channel Grate Black 48 ft. 0.66 25PF

544 3’ Channel Grate Sand 48 ft. 0.66 25Pf

551 3’ Channel Grate Brick Red 48 ft. 0.66 25PF

Requires 4 screws per Grate. ADA Compliant/Heel-proof.

3 ft. Structural Foam Polyolefin Channel Grate with UV inhibitor. Open sur-face area 9.90 square inch-es per foot. 30.29 GPM per foot.

2-3/4”

1/2” x 5/16”GrateOpenings

36”

Part Pkg . Wt . Ea . Prod . No . Description Color Qty . (lbs .) Class Specifications 552B 1’ Brass Channel Grate Satin Brass 12 1.25 25PF

553PB 1’ Brass Channel Grate Polished Brass 12 1.25 25PF

Fits #500 Mini Channel. ADA Compliant/Heel-proof.

1 ft. Mini Channel Solid Brass Grate with brass screws. Open surface area 9.20 square inches per foot. 28.14 GPM per foot.

2-13/16”

1/4” x 7/8”GrateOpenings

12”

Part Pkg . Wt . Ea . Prod . No . Description Color Qty . (lbs .) Class Specifications 500 6’ Mini Channel Drain Gray 48 ft. 3.26 25PF

Grate should be recessed 1/8” below finish grade in non-trafic applications. Grade should be recessed 1/4” in traffic applications.

6 ft. Mini Channel Drain with inverse flying-buttress design, bottom flange, patented honeycomb reinforced walls and UV inhibitor.

Part Pkg . Wt . Ea . Prod . No . Description Color Qty . (lbs .) Class Specifications 529 S/S Screws, FH #4 x 5/8” Steel 64 0.10 25PF

554S 3’ Botanical Channel Grate Sand 16 0.89

554GR 3’ Botanical Channel Grate Green 16 0.89

554GY 3’ Botanical Channel Grate Gray 16 0.89

554 3’ Botanical Channel Grate Black 16 0.89

554CI 1’ Botanical Cast Iron Grate Raw Iron 1 1.82

Fits #500 Mini Channel. ADA Compliant.

3 ft. Structural Foam Polyolefin Botanical pattern Channel Grate with UV inhibitor. Open surface area 5.44 square inches per foot. 16.64 GPM per foot.

1 ft. Mini Channel Botanical Cast Iron Channel Grate. Open surface area 5.39 square inches per foot. 16.49 GPM per foot.

3.08”

36”

2-3/4”

12”

Part Pkg . Wt . Ea . Prod . No . Description Color Qty . (lbs .) Class Specifications 529 S/S Screws, FH #4 x 5/8” Steel 64 0.10 25PF

555S 3’ Wave Channel Grate Sand 16 0.88

555GR 3’ Wave Channel Grate Green 16 0.88

555GY 3’ Wave Channel Grate Gray 16 0.88

555 3’ Wave Channel Grate Black 16 0.88

555CI 1’ Wave Cast Iron Grate Raw Iron 1 1.30

Fits #500 Mini Channel. ADA Compliant.

3 ft. Structural Foam Polyolefin Wave pattern Channel Grate with UV inhibitor. Open surface area 5.73 square inches per foot. 17.54 GPM per foot.

1 ft. Mini Channel Wave Cast Iron Channel Grate. Open surface area 4.11 square inches per foot. 12.56 GPM per foot. Class B load rated.

3.08”

36”

2-3/4”

12”

6”


TRENCH DRAINS

Mini Channel™ AccessoriesExcellent for light-duty applications including residential pools, concrete and paver patios, spas and tennis courts .

19www.spec-west.com

Part Pkg . Wt . Ea . Product No . Description Color Qty . (lbs .) Class

529 Stainless Steel Screws, FH #4 x 5/8” Steel 64 0.10 25PF

230 6” Channel Installation Stake Gray 24 0.04 25PF

532 2” Sch. 40 Hub to 3” S&D Spigot Adapter White 20 0.14 30PV

533 2” Sch. 40 Hub to 4” S&D Spigot Adapter White 20 0.34 30PV

546 Spigot End Outlet for 2” Sch. 40 Pipe Fitting Gray 10 0.15 25PF

547 3” Channel End Cap Gray 20 0.12 25PF

548 3” Channel Coupling Gray 20 0.12 25PF

550 3’ Long Channel with 2” Sch. 40 Spigot Bottom Outlet Gray 6 2.17 25PF

5300 Fabricated 45° Elbow with Grate Gray 1 0.40 25PF

5303 Fabricated 45° Elbow with Grate Sand 1 0.40 25PF

5370 Fabricated Tee with Grate Gray 1 0.50 25PF

5372 Fabricated Tee with Grate Black 1 0.50 25PF

5374 Fabricated Tee with Grate Brick Red 1 0.50 25PF

5380 Fabricated 90° Elbow with Grate Gray 1 0.40 25PF

5383 Fabricated 90° Elbow with Grate Sand 1 0.40 25PF

Mini Channel™ Paver InstallationNDS Mini Channel and grates are dimensionally compatible with standard 2-3/8” clay and concrete paving systems. Both decorative and standard grate options make Mini Channel an ideal choice for drainage on paver parking courts, patios and plazas.

Mini Channeland Grate 2-3/8” Paver

Sand Setting Bed

Compacted Base

3”

4-1/2”

DIVISIO

N2

CONSTRUCTION LASER

21www.spec-west.com

RL-H4C Self-Leveling Construction Laser

Aluminum Tripod

SPECIFICATIONS Accuracy Horizontal ±10 arc seconds Self-Leveling Range Horizontal ±5° Working Area 2,600 ft. (800m) Rotation Speed 600 rpm Dust/Water Protection IP66 Operating Time Alkaline: 100 hours Ni-MH: 60 hours Operating Temperature -4°F to 122°F (-20°C to +50°C) Size (H x W x L) 8.5” x 7.75” x 7” (216.5mm x 195.6mm x 177mm)

KIT COMPONENTS

Laser Package Components: • RL-H4C Laser • LS-80L Sensor • Sensor Holder • Carry Case

Multi Purpose LaserGrading, excavating and general construction projects are perfect applications for the RL-H4C. With the added “Slope Matching” feature you can check grade on all your flat and slope work. The 600 rpm rotation speed makes the RL-H4C a great match with any machine mounted laser sensor. Wherever you need an accurate, horizontal laser, the RL-H4C is your best solution.

Easy to UseWith electronic self-leveling, you hit the Power Button and go right to work in seconds. If your RL-H4C gets disturbed on the job it relevels itself automatically. Its super fast self-leveling motors are accurate to +/-10 arc seconds.Long Range OperationNeed to shoot elevations up to 1,300 feet from your laser? No problem. This instrument has the power and range to cover a 2,600 ft. diameter jobsite.Long Battery LifeThe RL-H4C gives you the option of 60 hours of continuous usage with the Rechargeable Battery Pack or 100 hours with (4) D Cell Batteries.

All Weather DependabilityWith the IP66 rating, the RL-H4C is “jobsite tough” and can withstand dust, a sudden shower and even torrential rain-fall.Five Year GuaranteeThe RL-H4C Laser comes with a Five Year Guarantee. Topcon is backing up this reliable, accurate laser with the best factory warranty in the industry.

DIVISIO

N2

STRIPE WATER BASED MARKING PAINTA fast drying marking paint designed to be sprayed in an inverted position. Produces vivid marks, does not clog, and is safe for grass. Meets APWA color standards and is VOC compliant. May be sprayed

by hand or with the Z-605 marking gun or Z-606 marking wand.

Suggested Uses:Utility markingGolf coursesLandscapingConstruction sitesSurveyingMining

Packaging:Cans per case 12

Container 20 fluid ounce canLabel weight 17 ounces (482 grams)

Hazard Class 2.1

MARKING PAINT

22

Properties: Dry Time*: Flammability “Flammable”Flash point -4F To touch 15 minutesSpecific gravity 0.83Solids content ~26%VOC content ~52%, cannot exceed 66% *At 72°F, 50% humidity,MIR value ~0.62, cannot exceed 1.20 1.5 mil thicknessHAPs content 0Storage temperature 40-100F Curing time is extended with multiple Application temperature 50-90F coats and excessively thick coatsDurability GoodAbrasion resistance Good Gloss*: Flat, <15Resin system V.T. AlkydShelf life Guaranteed for 2 years *as measured on a 60° gloss meterFreeze/Thaw Up to 7 times without harm

**Do not warehouse in subfreezing temperatures**

Available Colors:

20-652White

20-653Precaution Blue

20-654Fluorescent Red

20-655Safety Green

20-657Fluorescent Orange

20-658Fluorescent Red/Orange

20-663Black

20-668Fluorescent Green

20-669Fluorescent Blue

20-670Alert Orange

20-671Safety Red

20-676Hi Visibility Yellow

20-678Caution Yellow

20-679Fluorescent Hot Pink

20-680Purple


23www.spec-west.com

DIVISIO

N2 .1Swimming Pool Products

Many products available are not shown in this catalog. Call SPEC•WEST first.

Cantilever Forms

Deck Drains / Accessories

Deck Joint Sealants

Deck Joint FillersSTETSON DEVELOPMENT, Inc.

CANTILEVER FORMS

24

RegularPoured in Place “Cantilever Forms” (Gunite/Fiberglass)

Part# Description1CF000 Form Only1CF011 Form - No Tie Wire - White Tile Strip1CF111 Form - Tie Wire - No Tile Strip1CF112 Form - Tie Wire - White Tile Strip1CF122 Form - Tie Wire - Grey Tile Strip1CF132 Form - Tie Wire - Tan Tile Strip1CF162 Form - Tie Wire - Black Tile StripAvailable with Plumb Strip(Used to square the top edge of Fiberglass pools)Packaged 112’ per carton

CapstonePoured in Place “Cantilever Forms” (Gunite/Fiberglass)


IntermediatePoured in Place “Cantilever Forms” (Gunite/Fiberglass)


Deep RegularPoured in Place “Cantilever Forms” (Gunite)

Part# Description12CF000 Form Only12CF011 Form - No Tie Wire - White Tile Strip12CF111* Form - Tie Wire - No Tile Strip12CF112* Form - Tie Wire - White Tile Strip12CF122* Form - Tie Wire - Grey Tile Strip12CF132* Form - Tie Wire - Tan Tile Strip12CF162* Form - Tie Wire - Black Tile Strip*Includes 2 Tie Wire Side KitsPackaged 112’ per carton


DIVISIO

N2 .1

CANTILEVER FORMS

25www.spec-west.com

Sandstone FormPoured in Place “Cantilever Forms” (Gunite)

Part# Description17CF000 Form Only17CF011 Form - No Tie Wire - White Tile Strip17CF111* Form - Tie Wire - No Tile Strip17CF112* Form - Tie Wire - White Tile Strip17CF122* Form - Tie Wire - Grey Tile Strip17CF132* Form - Tie Wire - Tan Tile Strip17CF162* Form - Tie Wire - Black Tile Strip*Includes 2 Tie Wire Side KitsPackaged 80’ per carton

Commercial FormPoured in Place “Cantilever Forms” (Gunite)

Part# Description3CF000 Form Only3CF111* Form - Tie Wire - No Tile Strip3CF80* Form - Tie Wire - White Tile Strip3CF802* Form - Tie Wire - Tan Tile Strip3CF803* Form - Tie Wire - Black Tile Strip3CF805* Form - Tie Wire - Grey Tile Strip*Includes 2 Tie Wire Side KitsPackaged 80’ per carton

OG FormPoured in Place “Cantilever Forms” (Gunite/Fiberglass)

Part# Description20CF80 OG Form - Tie Wire - White Tile Strip*Includes 2 Tie Wire Side KitsPackaged 80’ per carton

Fiber-Optic Capstone

Resin Rock

Poured in Place Perimeter Fiber-Optic Form (Gunite/fiberglass)

This form is designed to be used when applying resin overlays to existing cantilever decks. The forms are lined with tape to prevent the solvent based overlays from dissolving the foam and to leave a smooth surface when removed.

Part#7FS112 For Fiberstars FSSB, FSSB-CABL-42 & Supervision SV2377SV112 For Supervision SV32, SV42, Lumenyte, Fiberstars ELD, BPAK-50, Fiberworks FW 25, FW 5077AP112 For Fiberworks Ultra Glow 25, 50, 75

Carton Includes:• 112’ Resin Rock Form• 1 Tie Wire Side Kit• 1 Instruction Sheet

Carton Includes:• 112’ Fiber-Optic Capstone Form• 112’ Fiber-Optic Receiver• 1 Tie Wire Side Kit• 1 Instruction Sheet

DECK DRAINS& FITTINGS

26

Frontier Deck Drain“Removable Top Drain”Frontier Deck Drain is a removable top drain that features a double wall base and snap in top (PVC). When installing this drain the tops are staggered past the joints making the joints very rigid. Because the tops are removable, this drain is easy to clean and the tops can be replaced if ever damaged. Frontier Deck Drain is used in many residential and commercial swimming pools, patios and other pedestrian traffic areas.

Part# Top Cap Only Base OnlySDDW - White SDD-TCW-80 BASESDDT - Tan SDD-TCT-80SDDG - Grey SDD-TCG-80SDDB - Black SDD-TCB-80SDDM - Marble SDDTCM-80

Carton Includes: 80’ Base, 80’ Top Cap, 8 Couplers and 4 End Adapters

Channel DrainStegmeier LLC Channel Drain has an attractive dual channel top that reduces water pass-over. Channel Drain is an extruded PVC drain that comes with con-necting couplers and is designed to be set level. This drain is commonly used in pool decks, patios and other pedestrian traffic areas. Channel Drain is easy to install by staking on grade (no trenching required) and has a full .100” thickness top for durability.

Part#CD3W - WhiteCD3T - TanCD3G - GreyCD3B - Black

Carton Includes: 80’ Channel Drain, 8 Couplers and 4 End Adapters

Re-Cover Drain (Renovation)Replacement top used to repair damages deck drain.

Re-Cover Drains are designed with continuous side-to-side slots, allowing water to enter from either side at the original elevation. This important feature prevents ponding and subsequent freeze and thaw damage.

Installation TipsUsing a 1/8” carborundum or diamond blade, make two parallel cuts, removing the center of the damaged deck drain. Apply a continuous bead of silicone into the crack between the side walls of the existing drain and the con-crete. Press the Re-Cover Drain into the silicone filled slot. Place a weight on top of the Re-Cover Drain to hold it securely in place until the silicone cures.

Part#RD2W - WhiteRD2T - TanRD2G - GreyRD2B - Black

Packaged: 80’ Per Carton in 10’ Lengths

Re-Cover Strip (Renovation)These replacement covers are the perfect answer for the repair of damaged deck joints. After making a saw cut through the top of the old joint, this product is clipped over the old joint and held in place with adhesive. Re-Cover Strips can be used on joints that have been edged or not edged.

Packaged: 240’ Per Carton in 12’ Lengths

Part#RS2W - WhiteRS2T - TanRS2G - GreyRS2B - Black

Frontier Deck JointFrontier Deck Joint provides the necessary crack control, but not so deep as to interfere with steel placement. In addition to control, it adds a beautiful finished look. It is cost effective, durable, and easy to install. With the “T” member ears embedded in concrete, surface water seepage is kept from subsoil.

Packaged: 240’ per case in 12’ lengths with protective tape on top.

Part#SDJIW - WhiteSDJIT - TanSDJIG - GreySDJIB - Black

Frontier Nose CapsFrontier Nose Caps are designed to allow the control joint to run smoothly down the face to the tile or pool wall.

White Black Tan GreyRegular 1NC1 1NC2 1NC3 1NC6Capstone 9NC1 9NC2 9NC3 9NC6Intermediate 2NC1 2NC2 2NC3 2NC6Commercial 3NC1 3NC2 3NC3 3NC6Pool Cover &Stamp-A-Form 4NC1 4NC2 4NC3 4NC6Child Safety Grip CSGNC1 CSGNC2 CSGNC3 N/ASandstone 17NC1 N/A 17NC3 N/A

Carton Includes: 100 pieces

Drain Fittings Qty./ Channel Frontier Carton Drain Deck Drain90 Degree 10 CD9* SDD9045 Degree 10 CD4* SDD45Side Adapter 4 CDSA* SDD-SAClean Out 4 CDCO* N/A Tee 4 CDT* SDD-TWCross 2 CDX* SDD-XWDown Adapter 4 CDDA* SDD-DAEnd Adapter 4 DEA DEA End Plug 10 DEP DEPCoupler 12 DCU DCUP

*Add: W - White, T - Tan, G - Grey, B - Black

Channel Drain

Frontier Deck Drain


DECK DRAINS & SKIMMER LIDSSTETSON DEVELOPMENT, Inc.

27www.spec-west.com

MAKE YOUR POOL SPECTACULAR! Finally, an innovative way to eliminate the standard skimmer lid, deck drains and access panel cover from every deck finish. Pouralid’s unique patented design system along with the full color selection will make these items virtually disappear with every deck finish.

Pouralid™

Pouradrain™

Variety of Uses: Universal Pool Skimmer Cover, Water Main, Valves, Waterfalls & Fountains, Sewer Cleanouts.Fits: Hayward 1070, Hayward 1080, Waterway, Sta-Rite, Swinquip, U3, Jacuzzi, American, Pentair/Pacfab.

11” Square Pouralid Pool Skimmer Cover for New Construction

Part Number:SQ201 PAL TanSQ201 PAL GreySQ201 PAL Frosted

Recommended Load Class A: For pedes-trians, bicycles and wheel chair traffic. Loads are based on encasing product in concrete. ADA compliant.Specifications: 4” round polly resin grate with universal fit 3” to 4” collar. Fits: 3” or 4” SDR-35 drain pipe. 3” open surface area 4.125 sq. in. 5.65 GPM.

4” Pouradrain

Part Number:DC-401 ClearDC-401 GreyDC-401 Tan

Variety of Uses: Universal Pool Skimmer Cover, Water Main, Valves, Waterfalls & Fountains, Sewer Cleanouts.Fits: Hayward 1070, Hayward 1080, Waterway, Sta-Rite, Swinquip, U3, Jacuzzi, American, Pentair/Pacfab.

10” Pouralid Pool Skimmer Cover for New Construction

Part Number:201 PAL Tan201 PAL Grey201 PAL Clear201 PAL White

For use with: Play Equipment, Sewer Cleanouts, Valves, Water Main.

6” Pouralid Cover

Part Number:202 PAL Tan202 PAL Grey202 PAL Clear

Fits: Hayward 1070, Waterway, Sta-Rite, U3, MP Auto Fil.

9” Pouralid Replacement Lid for Existing Pool Skimmer

Part Number:204 PAL Tan204 PAL Grey

DIVISIO

N2 .1

POOL PRODUCTS

DECK-O-SEAL® – Polysulfide Joint SealantDECK-O-SEAL is used for caulking and sealing joints subject to concrete movement to provide a firm, flexible, weather-tight seal. It is ideal for sealing joints on swimming pool decks. It is applicable for both interior and exterior use.

DECK-O-FOAM® – Expansion Joint FillerDECK-O-FOAM is ideal for use as an expansion, contraction, and/or isolation joint in swimming pool decks, curb and gutter work, floor slabs, pavement patch repair, sidewalks, driveways, plazas, parking decks, highways, and airport runways.

FEATURES/BENEFITS• Easy to install. • Pre-scored strip is easily removed.• Economical alternative to expansion joints.• Controls amount of sealant needed and acts as a bond breaker.• Eliminates costly sawing and routing.• Flexible, lightweight, and can be formed around curved objects.• Can be used in interior or exterior applications.SPECIFICATIONS• ASTM D 4819, Type IISIZES • 1/4” x 3” x 100’ • 1/2” x 3-1/2” x 50’ • 1/4” x 4” x 100’ • 1/2” x 4” x 50’ • 1/4” x 6” x 100’ • 1/2” x 5” x 50’ • 1/4” x 8” x 100’ • 1/2” x 6” x 50’ • 1/4” x 48” x 100’ • 1/2” x 8” x 50’ • 1/2” x 3” x 50’ • 1/2” x 48” x 50’*Special sizes available upon request

28

DECK-O-SEAL ONE STEP® – Polysulfide Joint Sealant

DECK-O-SEAL ONE STEP is ideal for glazing operations and sealing joints in concrete structures. It bonds well to concrete, masonry, glass, metal and wood. It is ideally suited for applications when an expansion joint is required. NOTE: Do not paint DECK-O-SEAL.ONE STEP is frequently used in high sloping and vertical expansion joints where a non-sag, watertight, elastomeric sealant is required. ONE STEP is ideal for use in swimming pools above the waterline, where the tile meets the pool coping. FEATURES/BENEFITS• Highly resilient with excellent recovery characteristics.• Prevents uncontrolled cracking by allowing expansion and contraction

during temperature changes.• Stays flexible – won’t become brittle/crack due to UV exposure.• Resists abrasion, weathering and moisture; elevated temperatures will

not cause discoloration.• Resistant to today’s pool chemicals when used under normal condi-

tions.• Provides a permanent and uniform watertight seal.• Ready to use in self-contained cartridge.• Economical … no wasted material.• Eliminates moisture delays … rain or morning dew actually enhances

the product after installation.SPECIFICATIONS• ASTM C 920, Type S, Grade NS, Class 25, NT• CRD-C-506, Type II, Classes A & B• Federal Spec. A-A-1556A, Type S, Grade NS, Class 25, NTCOLORDura-White, Stone Gray and Desert TanPACKAGINGPre-mixed, ready-to-use, self-contained, 11 oz. cartridges, packaged 12 per carton


FEATURES/BENEFITS• Highly resilient with excellent recovery characteristics.• Provides permanent and uniform watertight seal.• Prevents uncontrolled cracking by allowing expansion and contraction

during temperature changes.• Stays flexible … won’t become brittle or crack due to ultraviolet expo-

sure.• Resists abrasion, weathering and moisture … elevated temperatures

will not cause discoloration.• Not affected by today’s pool chemicals.• Retains joint soundness in service once it’s cured and can be

stretched or compressed up to 25%.SPECIFICATIONS• CRD-C-506, Type I, Classes A & B• ASTM C 920, Type M, Grade P, Class 25, NT• Federal Spec. A-A-1556A, Type M, Grade P, Class 25, NTCOLORDura-White, Stone Gray, Desert Tan (Black, Redwood and custom col-ors available by special order)PACKAGINGPatented, pre-measured, two-component unitized, easy-to-handle pack-age contains proper ratio of base to setting agent, which must be main-tained. Ninety-six oz. base material can, setting agent, stirring paddle, and applicator are all included. Twenty-four oz. unitized packaging kits are also available. NOTE: Applicator bottle is not included in the 24-oz. kits.

29www.spec-west.com

DIVISIO

N3 .1Concrete Forming


Form Ties

Forming Accessories

Form Hanger, School Brackets

Timberstrand / Form Boards

Concrete Dowels

Construction Stakes

Cam-Lock Wall Forms

Scaffold Brackets

Column Clamps

Column Forms

Wall Cap Forms / Step Liners

Countertop Forms

SINGLE WALERFORMING SYSTEM

30

Cam LockLight Commercial Hand-Set Forming System• Cam Lock Bracket engages the loop-end tie, securely holding the 2x4

waler into place.• Stiffback Clamps attach to Cam Lock Brackets anywhere a 2x4

stiffback member is needed.• Self-centering plastic cushion cones seat tightly to the form providing a

neat and clean breakback.• Cam Lock ties are self spreading with a metal washer embedded into

each cone.• 1”, 1-1/2”, or 2” depth cones or washers.• Cam Lock ties eliminate the need for long and short end ties by

utilizing one standard end length.

Typical Form Design• Typical tie pattern is 16”x24” using common forming materials (2x4

lumber and 3/4” plywood form face).• 2250# safe working load (2:1 safety factor) adjust tie pattern/pour rate

according to specific job requirements.• Uses less lumber and requires less nailing than other typical wood-

based hand-set systems.• Customizable and flexible system—adaptable to most other types of

wall forming systems.• Stackable—use with Gates Scaffold Brackets.Versatile• Great for radius forming—ask about pre-cut wood radius walers—form

perfect curved walls.• Virtually all commercial jobsites have forming requirements ideally

suited for the Cam Lock System—combine with Gates Anchor Lock Gang Systems.

• Cam Lock Brackets, Stiffback Clamps, and Scaffold Brackets are plated for corrosion resistance.

Safety Rail Post• Accommodates a top, mid and bottom horizontal 2x4

safety rail.• Galvanized.

Stiffback Clamp• Cast steel handle (galvanized).• 3 Ga. wire yoke for connection to the

Cam Lock Bracket.

Cam Lock Bracket• Cast steel claw and body.• Galvanized.• Ears tested to 5000# without failure.

Dual-Duty Scaffold Bracket• Attached to Gates Cam Lock Bracket with

a 2x4 Stiffback Clamp above and below the Scaffold Bracket.

• Safety Post engaged in the receiver end of the Dual-Duty Scaffold Bracket.

• Galvanized.

Cam Lock “D” Cone Ties• Self-centering Poly-cone form tie.• Drill 13/16” tie holes.

Drill 13/16”Tie Holes

Tie SpacingFor RegularForming

GATESVERTICAL

DRILL STAND

Plan of Typical Corner for Walls Greater Than 12”

Plan of “T”-WallJunction for 12” Walls

PANEL TIE SPACING


SCAFFOLD BRACKETS

31www.spec-west.com

Gates Scaffold BracketsProved by UNITED STATES TESTING CO ., INC .to withstand repeated loads of 2500 pounds .(Meets OSHA Standards .)

The Gates Scaffold Bracket is constructed of sturdy, heavy gauge, pressed steel. Extra rigidity is obtained by spot welded corner gusset plate and tubularriveted bracing.

Hanger arms attach to the Cam Bracket ears in the same manner as the Stiff Back Cam. Secure, firm attachment in seconds is accomplished without bolts, nuts or nails.

It is quickly adaptable for use with 2x6 stiff back by removal and repositioning of hanger arms.

VERY IMPORTANT • HOW TO USE GATES SCAFFOLD BRACKETS • VERY IMPORTANT

Place a stiff back cam above and below each scaffold bracket placed on the form. When used as shown, the scaffold load will be placed on several ties and brackets.

A stiff back cam must always be used above each scaffold bracket as shown.

On all walls, scaffold brackets must always be placed within 6’-0”. 42” guard rail with toe plate, mid rail and top rail must be used.

All 2x4 stiff backs used to attach the Gates Scaffold Brackets MUST EXTEND TO A SOLID BASE. NEVER use short pieces of 2x4 under the scaffold brackets.

Scaffold Bracket must be attached to second Cam-Lock or lower from top of form with at least one Stiff Back Cam above and at least one below. Never attach Scaffold Bracket to the top row of ties.

GATESSCAFFOLDTEST NO.

DEN. 19026

All new Gates Scaffold Brackets factory tested to 3,000 lbs.

NEW YORK STATEB.S.A. SAFETY

APPROVAL #5005

Not to be used above 20’-0”. Any scaffolding above 23 feet should be checked with local, state and OSHA requirements.

SAFETY RAILPOST

DIVISIO

N3 .1

GANG FORMING

32

#5 Anchor-Lock Gates’ Mid Weight Gang System• Form Weight – approximately 7#/sf (typical design).• #5 Anchor Locks are attached to the form and lock the pass-thru ties

with a 1-1/2” breakback.• Can utilize taper ties or threaded 3/8” inner ties.• Plastic Tie Hole Sleeves are easy to build into the forms and fit closely

around the cone preventing excessive grout loss.• Attached hardware and loop end ties hold forms apart while setting and yield a precise wall thickness – no internal spreader needed.

Typical Form Design• Typical tie pattern is 24”x24” using common forming materials (2x6

and 4x4 lumber and 3/4” plywood form face).• 3250# Safe working load (2:1 safety factor) adjust tie pattern/pour rate

according to specific job requirements.• Straightforward gang form fabrication design is quick to build and easy

to modify.• Customizable and flexible system—adaptable to most other types of

wall forming systems.• Assembled forms have no loose hardware.• Gang forms can be connected using Gates 2”x2” Punched Angle with

loose or attached “U” Clamps.Versatile Forming System• Great for radius forming (ask about pre-cut wood radius walers or

Gates Radius Steel Walers) form perfect curved walls.• Gates builds custom forms delivered to the jobsite ready to set with

minimal assembly.• #5 Anchor Locks, Adjustable Form Braces and Scaffold Brackets are

zinc plated for corrosion resistance.

Excellent Results Pour After Pour• Designed for rapid concrete placement using common forming materi-

als (2x4, 2x6 or 4x4 lumber and 3/4” plywood form face).• Gates recommends engineered LVL (laminated veneer lumber) to

make efficient use of the strength of the Lok Fast Clamp—LVL is stronger and can mean fewer clamps—saves time/labor in form fabri-cation/use.

• Straightforward form fabrication design is quick to build at the jobsite or fabrication facility—assembled forms have no

loose parts.• Brace with Gates Adjustable Form Brace.• Gates Plastic Chamfer creates a water tight seal for consistent color

and no voids in concrete.

Lok Fast Column Clamp• Recognized as best gang

clamp on the market.• 1/4” x 3”x4” Angle.• 3 Standard sizes: - 8” - 24” - 12” - 36” - 24” - 48”• Each clamp has one oper-

ator angle with locking unit (shown), one pin angle, and two identical back angles.

Lok Fast Column ClampColumn Forming• Gates flagship column forming system—one of the fastest and most widely used column forming systems on the market today.• Standard Clamps are available to accommodate three column size ranges (8”-24”, 12”-36”, and 24”-48”).

#5 Anchor-Lock (Open & close withcarpenter’s hammer.)

#5 Anchor-Lock Plastic Tie Hole Sleeve

#5 Anchor-Lock Tie


GATES PU Loop – Lok-Fast column form pickup loop.

Disposable, one-piece cylindrical fiber forms for building concrete columns, piers, pilings and footings

COLUMN FORMS

www.spec-west.com

• Light Weight – Easy to store, handle and erect.• Strong – Multiple layers laminated for extra strength.• Versatile – Can be sawed, bored or

notched.• Moisture Resistant – Special adhesive improves weather

tolerance.• Convenient – Minimal bracing requirements.• Engineered for superior performance – Increased concrete pouring and vibration resistance.• Provides quality results – Poly-Coated interior for less moisture

loss and easier stripping.

RECESS RINGSAccent your columns withdecorative reveals• Easy to install in formwork.• Packaged with hardware and detailed

instructions.• Pretreated for easy removal.• Produces sharp, clean edges.• Custom sizes available.

FANCY FORMSFor the creative – Complex Shapes Made Simple• Huge variety of unique shapes and sizes.• Easy to use on any job site.• No spiral seam lines.• Strips easily.• Economical alternative to custom made forms.

SONOTUBE® FINISH FREE®

Leaves an impression on you – not the column• Exceptionally smooth columns that require no manual finishing.

LINED FORMSEliminate Spiral Seams• Column Tube Liner consists of a high

impact plastic sheet that lines conven-tional fibre tubes.

• One Seam to grind or finish.• Economical alternative to eliminate

added finishing costs.• Easy to use on any job site. Column

Tube Liners use conventional concrete placement methods and are easy to handle.

• Available in standard diameters from 10” to 36”.

• Can be left on for protection against spills and other hazards.

• A tube with liner can be left on for a full 28-day cure, resulting in greater con-crete compressive strength.

• Simplifies stripping, make several ver-tical cuts with a hand saw, remove the fibre tube in sections and strip away the liner.

• Column Tube Liner offers the advan-tages of low unit cost, faster placement with no cleaning,

clamping, re-oiling or form release agents required.

CONSTRUCTION TUBESROUND CONCRETE VOIDS• Specifically designed with exterior moisture-resistant coating.

• To form voids in concrete construction of slabs, bridge decks, roofs, piles, columns and lift slabs.

• Moisture-resistant adhesives throughout.

• End closures can be made of plywood on-site or ordered from dealer.

• Also available: Dowel tubes.

SIZES AND TYPESSpec•Tubes are available in diameters from 2” to 60”, in lengths up to 50 feet.Heavy Wall – Recommended for col-umns 18’ in height and taller. A premium quality fiber column form for use when job circumstances dictate that a stronger form is needed.Standard Wall – Recommended for columns 12’ to 18’ tall. Widely used for exposed columns. Produces true, well-formed columns that meet most construc-tion demands.Light Wall – Recommended for columns not exceeding 12’ in height. Similar construction as the Standard Wall, with thinner wall.

MADE IN THE USA

Spec•Tube

SPEC•TUBER O U N Dconcrete forms

SONOTUBE®

FINISH FREE®

concrete formswith StripCord®

Stripping filament

RAIN RESISTANTSonotube forms stand strong even in wet weather. Set today and pour tomorrow.

DIVISIO

N3 .1

FIBERGLASS COLUMN FORMS

34

Molded Fiber Glass Construction Products produces fiberglass domes and waffle forms for the construction of architectural, concrete ceilings. Fiberglass domes are lightweight, economical to use, and produce an attractive finish. MFG Construction Products Company maintains the largest inventory of standard forms. MFG custom forms can be made in almost any shape. The cost is relatively low and the shape possibilities are limited only by the designer’s imagination.

Round Column FormsThe MFG Construction Products Company name has become synonymous with the manufacture of one-piece, fiberglass reinforced plastic round column forms (RCFs). This RCF material selection makes them cost-effective and easier to handle in the field verses more traditional materials. MFG One-Piece RCFs are available in several standard sizes with diameters ranging 12” to 48” and lengths to 20’.

Designed for repeat useMFG One-Piece RCFs are “nest-able.” Requires less storage and shipping space.

• Virtually maintenance-free.• Easy to clean.• Smooth finish / one vertical seam. • Produces a beautiful concrete finish.• Can accommodate both architectural and standard concrete finish requirements.

Approx. Vol. Column Length Approx. Wt. of Concrete Diameter Up To Per Lineal Ft. Per Lineal Ft. 12” 20’ 9.9 lbs. .8 cu. ft. 14” 20’ 10.0 lbs. 1.0 cu. ft. 16” 20’ 11.1 lbs. 1.4 cu. ft. 18” 20’ 12.3 lbs. 1.8 cu. ft. 20” 20’ 13.1 lbs. 2.2 cu. ft. 22” 20’ 14.2 lbs. 2.6 cu. ft. 24” 20’ 15.2 lbs. 3.1 cu. ft. 26” 20’ 16.2 lbs. 3.6 cu. ft. 28” 20’ 17.3 lbs. 4.2 cu. ft. 30” 20’ 18.4 lbs. 4.9 cu. ft. 32” 20’ 19.5 lbs. 5.5 cu. ft. 34” 20’ 20.5 lbs. 6.3 cu. ft. 36” 20’ 21.5 lbs. 7.0 cu. ft. 38” 20’ 22.6 lbs. 7.9 cu. ft. 40” 20’ 23.7 lbs. 8.7 cu. ft. 42” 20’ 24.8 lbs. 9.6 cu. ft. 44” 20’ 25.8 lbs. 10.6 cu. ft. 46” 20’ 26.8 lbs. 11.5 cu. ft. 48” 20’ 27.9 lbs. 12.6 cu. ft.

Sizes

FEATURE BENEFIT

Lightweight • Fewer workers can handle forms with minimal effort. • Simple to set up and remove. • Lower shipping costs.

Strong and • Resist dents, sags, rot Durable and weather.


MAXIMUM LATERAL PRESSURE FOR MFG

ROUND COLUMN FORMS:It is recommended that

maximum lateral pressure should not exceed 1,900 psf.

MAXIMUM RATE OF POUR:At 90ºF: 18 feet per hourAt 80ºF: 16 feet per hourAt 70ºF: 14 feet per hourAt 60ºF: 12 feet per hourAt 50ºF: 10 feet per hourAt 40ºF: 8 feet per hour

Applies only for normal weight concrete made with type 1 cement, no admixtures or

pozzolans, slump no more than 4 inches, and vibration depth limited to 4 feet or less.

CONCRETE FORMS

35www.spec-west.com

Wall Cap Forms (80’ per carton) Part # Regular “360” REG-360Capstone “350” CAP-350Mini-Cap “300” MC-300OG “400” OG-400OG “600” OG-600

Length Part# Qty.Regular 4 ft. 1STP40 40 LFRegular 8 ft. 1STP80 80 LFIntermediate 4 ft. 2STP40 40 LFIntermediate 8 ft. 2STP80 80 LFCommercial 4 ft. 3STP24 24 LFCommercial 8 ft. 3STP48 48 LFCapstone 4 ft. 9STP40 40 LFCapstone 8 ft. 9STP80 80 LFSandstone 4 ft. 17STP40 28 LFSandstone 8 ft. 17STP80 56 LFSafety Tread 4 ft. 19STP40 40 LFSafety Tread 8 ft. 19STP80 80 LFOG 4 ft. 20STP24 24 LFOG 8 ft. 20STP48 48 LF

Wall Cap Forms are used to pour concrete caps on block walls, glass block walls, planters and benches. Wall Cap Forms are made of foam, making them lightweight and reusable. They are held in place with reusable spring clamps. Wall Cap Forms are available in several classic profiles. They provide an affordable “Cast-in-Place” solution.Spring Clamps are designed to hold the forms securely yet be removed easily without damage to the wall surface.

“For Poured In Place Concrete Counter Tops”Stegmeier’s Counter Top Forms are the answer to installing the popular counters found in many contem-porary kitchens, baths, and commercial sites such as restaurants and bars. These short 2” thick profiles are the perfect height for most applications and can be shaped or mitered to any angle.

Step Liners are a flexible foam step liner used to produce architectural profiles when pouring concrete steps. These labor saving forms are attached to the inside of the wood forms using spray adhesive, nails and or roofing tacks. Radius steps may be formed by attaching Step Liners to Slip-N-Join Lumber (a reusable plastic bender board by Stegmeier LLC). Break-away slots allow for three (3) riser heights. Step Liners may be stripped and finished much earlier than conventional forms.

Spring Clamps (Sold separately)Packaged 10/cartonPart #SPR-CLP

CAPSTONE DIAMOND CUT MARBLE ROUND REGULAR OG Part# CTF-32-CS Part# CTF-32-DC Part# CTF-32-MR Part# CTF-32-RG Part# CTF-32-OG

Counter Top Forms have a smooth even texture allow-ing them to be stripped early while there is ample time for finishing.

Carton Includes:• 32’ Countertop Forms• 1 Countertop Side Kit (50 Tie Wires, 50 Wood

Screws, 1 Foam Profile Edging Tool and 1 Roll

of Bending Tape)

Wall Cap Forms

Step Liners

Countertop Forms

DIVISIO

N3 .1

FIBERGLASSFORM TIE SYSTEM

36

SuperTie™F I B E R G L A S S F O R M T I E S Y S T E M

Say goodbye to corrosion forever.Easier to use, saves time, and less expensive than traditional steel form ties.• For industrial and commercial .• For architectural smooth form surfaces .• For architectural exposed aggregate formed or

wood plank finishings .• For architectural form liner formed finishes .

SuperTie™ System Overall AdvantagesSuperTie™ systems are appropriate for use in all forming applications but are especially beneficial in situations such as architectural finishes because an aesthetically pleasing finish is attained with tremendously reduced labor expenditures. The systems also reduce costs in battered-wall and “odd-sized” tie situations because the rod is cut to the length required at the jobsite.• Superior Finishes: Improved architectural finishes, without

patches or rust.• No Corrosion: The fiberglass form tie material cannot rust,

eliminating the need to have a break-back and the need for subse-quent plugging and patching to forestall rust.

• Saves Money: Saves dramatically on labor costs. Reduces form-tie-related costs as much as 70%.

• Reduced Inventory: One size fits all jobs. Bulk lengths are cut to the working measurements at the jobsite.

• Extends Form Life: All forms and form liners strip easily from the structure without damage from the ties.

• Natural Insulator: Fiberglass tie, which is left in the structure, is electromagnetically transparent, making it ideal for special situations where magnetic or electrical interference is undesirable. Fiberglass will not promulgate radio frequency and shields nuclear energy.

• Compatibility: SuperTie™ systems are compatible with all job-built and commercially available form systems.

GND6000 gripper with bearing plate and fiberglass rod


FORMING ACCESSORIES

37www.spec-west.com

Standard Stock Snapties, 2,250 Lbs. SWL, 2:1 SF High Strength Snapties, 3,350 Lbs. SWL, 2:1 SF• 1” x 1” Cones. • Loose Cupped Washer. End Wall End

Breakback

1” x 1” Plastic Cone

Plastic Plugs• For plugging unwanted holes in plywood forms.• Tight fitting for easy installation.

Metal Form Patches• For covering all kinds of holes and defects in ply-

wood form lumber.• Sharp spikes easily nail into plywood.

Form Aligner Brace, Turnbuckles

Standard Heavy-duty

Double Waler BracketsDesigned for double 2x4 or 2x6 strongbacks, used with a heavy-duty snaptie wedge.

Corner Lock BracketsSaves time in forming wall corners.

Heavy-duty Snaptie Wedges

Liner ClampsLiner Clamps are specifically designed for use as a single 2x4 strongback clamp.

DIVISIO

N3 .1

FORMING ACCESSORIES

38

She-Bolts, Waler Rods7/8” and 1” outside diameter coil. Thread available on request.5/8” Diameter coil. Tap available on request.

Ferrule Loop Inserts Straight Ferrule Loop Inserts

Scissor Clamps, Column Clamps• 2 Pieces per set. Size Column Size 36” 6” to 23-1/2” 48” 9-1/2” to 35-1/2” 60” 20” to 46”

Nut Washers, CatheadsAvailable in ACME and Coil Thread.

Concrete Tie Hole Plugs• Concrete tie hole plugs provide a fast, easy way to fill tie holes.

Taper Ties, Heavy-DutyCoil or ACME threaded.


LIGHT FORMING

39www.spec-west.com

A22 Spreader CleatsDayton Superior A22 Spreader Cleats are used to form footers or grade beams up to 32” high. On panels up to 24” high the cleats are spaced at 32” maximum center to center spacing. For panels over 24”, and up to 32”, the cleats should be spaced at 24” maximum cen-ter to center spacing. Two versions of the spreader cleat are available. The stamped metal cleat is available for 6” and 8” wall thickness-es with 3/4” or 1-1/8” lumber ends. The other spreader cleat version utilizes two lumber ends attached with a wire strut. This version is available for wall thicknesses over 5” with 3/4”, 1-1/8”, 1-5/8” and 2-1/4” lumber ends.

Wall Size End Size Code Weight (ea.) 6” 3/4” 13244 .363 lb. 8” 3/4” 13246 .431 lb. 10” 3/4” 13254 .479 lb. 12” 3/4” 13256 .527 lb. 6” 1-1/8” 13248 .410 lb. 8” 1-1/8” 13250 .478 lb. 10” 1-1/8” 13268 .526 lb. 12” 1-1/8” 13272 .574 lb.

Lumber

100 per carton

Lumber

Nail Hole

Lumber

Lumber

WallThickness

Nail Hole

WallThickness

A22 Spreader Cleat with Wire Strut

A22 Spreader Cleat – Stamped Metal 750 lbs .

Safe Working Load

To Order:Specify: (1) quantity, (2) name, (3) end dimension, (4) wall thickness.Example:500 pcs. A22 Spreader Cleat with wire strut, 2-1/4” end and 18” wall thickness.

Spreader Cleat

Plywood Panel

Nail Cleats to Green Footing

Spreader Cleat

SWL provides a factor of safety of approximately 2 to 1.

FAST-SET FORM HANGER, SCHOOL BRACKET• One piece, adjustable form hanger.• Saves on labor and materials.• Meets requirements for school and military projects.• High reuse factor.

ADJUSTABLE FROM:61-1/2” TO 102-1/2”

ADJUSTABLE FROM:3-3/8” TO 29-1/4”

FORM HANGER

DIVISIO

N3 .1

FORM BOARD

40

CONCRETE FORM BOARD THAT WORKS — AND KEEPS WORKING.On the jobsite, saving time means saving money. With TimberStrand® LSL Concrete Form Board, your crews won’t have to waste time sorting or culling through prod-uct to find the best pieces. Alignment is easier and splicing is minimal. Because TimberStrand® LSL is available in multiple depths, there’s no need for stacking. And, reduced jobsite waste means reduced clean-up time.Return on investment is the name of the game for every business. The advantages of investing in a product that stands up to multiple reuses vs. buying new product for every job is obvious. But TimberStrand® LSL benefits more than the bottom line, it also makes efficient use of natural resources. Our manufac-turing process maximizes wood’s natural strengths and minimizes natural inconsistencies like knots and splits. TimberStrand® LSL technology uses wood fibers from plentiful, small-diameter trees to engineer superior structural composite lumber for strength, consistency and durability.Performance like this deserves an encore — or several.

BENEFITS OFTIMBERSTRAND® LSL CONCRETE FORM BOARD

• No sorting or culling means reduced jobsite waste.

• Saves time and labor.

• Easy to handle and work with.

• Multiple reuses mean more bang for your buck.

• The best choice for a variety of concrete applications.

• Reliable performance over multiple uses.

• Requires less bracing than thinner materials.

• To eliminate stacking, the following sizes are available:

1-1/4” x 3-1/2” 1-1/4” x 11-7/8” 1-1/4” x 5-1/2” 1-1/4” x 14” 1-1/4” x 7-1/4” 1-1/4” x 16” 1-1/4” x 9-1/2”

• Custom sizes available on request.

ONE FORM BOARD, MANY POURS.TIMBERSTRAND® LSLCONCRETE FORM BOARDStraight forms are the critical component that makes all the difference to a successful pour. TimberStrand® LSL concrete form board is ideal for forming slab-on-grade foundations, tilt-up construction, driveways, sidewalks, footings—any ground-level slab.

• Stands up to multiple pours.

• Engineered for strength and consistent performance.

• Requires less bracing than thinner 1-1/8” materials.

• Resource-efficient technology.

• Excellent fastener holding properties.

• Resists bowing, twisting, and shrinking.

• Compatible with most release agents.


DIVISIO

N3 .1

CONCRETE DOWELING SYSTEM

41www.spec-west.com

SPEED LOAD SLEEVES Product Sleeve Code Round Dowel Size Length PSD1/2X5LT 1/2” x 10” Smooth Dowel 5” PSD1/2X9LT 1/2” x 18” Smooth Dowel 9” PSD3/4X5LT 3/4” x 10” Smooth Dowel 5” PSD3/4X9LT 3/4” x 18” Smooth Dowel 9” PSD3/4X12LT 3/4” x 24” Smooth Dowel 12” PSD1X9LT 1” x 18” Smooth Dowel 9” PSD125X9LT 1-1/4” x 18” Smooth Dowel 9”

Typical Joint Systems and Proper Slip Dowel Alignment

SPEED DOWEL™ in typical construction joint SPEED LOAD in typical expansion joint U.S. Patent D419,700

®

SPEED LOAD™ is a single component dowel sleeve for use in expansion joints. SPEED LOAD™ passes through pre-drilled expansion boards and has a self-locking design to securely position and align round dowels for positive load transfer.

Reduce slip dowel installation costs by

50% and ensureproper alignment .

SPEED DOWEL® is the pioneering slip dowel installation system that ensures proper dowel alignment for positive load transfer in slab-on-ground concrete joints.SPEED DOWEL® has revolutionized how the concrete industry designs and constructs joints for superior performance, while slashing the time and cost required for conventional slip dowel installations.Field-tested for over 20 years, SPEED DOWEL® is THE CHOICE for round and square dowel installations.

SPEED DOWEL® is available for round and square dowels in several sizes. Sleeves and bases are sold separately. Bases are reusable, which should be considered when determining requirements.

SPEED DOWEL® and SPEED LOAD™Applications include: Sleeve Sleeve Base

Code Round Dowel Size Length Code PSD09/#4TX 5/8” Smooth or #4 Rebar x 18” 9” PSD/#4BX PSD12/#4TX 5/8” Smooth or #4 Rebar x 24” 12” PSD09/#5TX 3/4” Smooth or #5 Rebar x 18” 9” PSD/#5BX PSD12/#5TX 3/4” Smooth or #5 Rebar x 24” 12” PSD09/#6TX 7/8” Smooth or #6 Rebar x 18” 9” PSD/#6BX PSD12/#6TX 7/8” Smooth or #6 Rebar x 24” 12” PSD09/#7TX 1” Smooth or #7 Rebar x 18” 9” PSD/#7BX PSD12/#7TX 1” Smooth or #7 Rebar x 24” 12” PSD09/#9TX 1-1/4” Smooth or #9 Rebar x 18” 9” PSD/#9BX PSD12/#9TX 1-1/4” Smooth or #9 Rebar x 24” 12” PSDEPX09/#9TX* 1-1/4” Smooth or #9 Rebar X 18” 9” PSDEPX/#9BX PSDEPX10/#9TX* 1-1/4” Smooth or #9 Rebar X 24” 12” PSD10/#11TX 1-1/2” Smooth or #11 Rebar X 20” 10” PSD/#11BX PSD230x20TL* 20mm x 460mm Round Dowel 230mm PSD20BL PSD305x20TL* 20mm x 610mm Round Dowel 305mm*Sika Greenstreak offers SPEED DOWEL® sleeves sized to suit epoxy coated dowels. Code Square Dowel Size Length Code PSDQ9X3/4TX 3/4” x 18” Square Dowel 9” PSDQ3/4BX PSDQ12X3/4TX 3/4” x 24” Square Dowel 12” PSDQ230X20TL 20mm x 460mm Square Dowel 230mm PSDQ20BL PSDQ305X20TL 20mm x 610mm Square Dowel 305mm

SPEED DOWEL™ SLEEVES AND BASES

• Warehouse / Distribution Centers• Big Box Stores• Manufacturing Facilities• Commercial / Industrial Complexes• Entertainment Centers• Recreational Complexes• Parking Facilities• Airports

STAKES & DOWELS

NAIL STAKES3/4” Round – “RH” “Heat Drawn” point SMOOTH DOWELS

42

Length / Weight:12”RH / 1.37 lbs.18”RH / 2.13 lbs.24”RH / 2.53 lbs.30”RH / 3.63 lbs.36”RH / 4.38 lbs.42”RH / 5.13 lbs.48”RH / 5.88 lbs.60”RH / 7.38 lbs.

Sizes:1/2”5/8”3/4” 7/8”1”1-1/8”1-1/4”1-1/2”

Special lengths available upon request. 10 Stakes per fully enclosed box. All dowels are premium saw cut (no burs).

When jobs require “BUY AMERICAN,”call HOGAN.

CONSTRUCTION STAKES

36”30”

36”

48”

±¾”Diameter

±1”Diameter

24”18”

VaporStake™ Description• Non-corrosive, permanent, plastic stake.• 48”, 36”, 30”, 24” and 18” lengths.• ±¾” and ±1” diameters.• 25 Stakes per bundle for easy carrying.• Made of solid recycled PVC for LEED Credit.• Acts as a permanent plug in the vapor retarder. • Helps meet ASTME 1643-11 (sections 8.4 and 8.6) when used with vapor retarder’s sealing mastic.• Pre-pointed / Pre-drilled holes for duplex nails (¾” x 18” no holes).• Can be easily drilled in field for additional holes.• A Patent Pending Product / builditgreen.org approved.

VaporStake™ Installation• Use the VaporStake™ as you would a typical stake.• Can be used with sprayed-on vapor retarders or polyolefin vapor retarders.• Seal the vapor retarder to the VaporStake™ as you would a pipe penetration. • Use geared lopping shears to cut stake off above seal, but below concrete’s finished surface.• Lower portion of the VaporStake™ remains in place, permanently plugging the penetration.

Length ± 48” 36” 30” 36” 24” 18”Diameter ± 1” 1” 1” ¾” ¾” ¾”Lbs. per Bundle ± 67 45 34 23 15 12Nail Holes Yes Yes Yes Yes Yes No


43www.spec-west.com

DIVISIO

N3 .2Reinforcements

StandardsConcrete reinforcing bars Nominal dimensions—round sections Bar sizes Cross Old New Weight sectional ins. Nos. lbs. per Diameter area Perimeter Pieces/Ton foot inches sq. inches inches (20 ft. lengths) 1/4 2 .167 .250 .05 .786 3/8 3 .376 .375 .11 1.178 266 1/2 4 .668 .500 .20 1.571 152 5/8 5 1.043 .625 .31 1.963 96 3/4 6 1.502 .750 .44 2.356 67 7/8 7 2.044 .875 .60 2.749 1 8 2.670 1.000 .79 3.142 1 9 3.400 1.128 1.00 3.544 1-1/8 10 4.303 1.270 1.27 3.990 1-1/4 11 5.313 1.410 1.56 4.430


Rebar Splicing System

Rebar Chairs

Rebar / Wire Mesh

Anchor Bolts

Bar Ties / Accessories

Nails

Recommended Dowel Bar and Dowel-In Sizes

DBDI® Splice SystemIAPMO Evaluation Report ER-0321The Dayton Superior DBDI Splice System is a two-piece, standard mechanical splicing product that eliminates protruding dowels. Typical applications include splicing reinforcement bars in monolithic structures, rebar anchorages, future expansion, and dowel bar substitution at construction joints.The components of the system, the Dowel Bar (DB) and Dowel-In (DI), are manufactured from standard rebar material. Basicfabrication consists of forging and threading operations. No welding or machining is required and the threading operation does not reduce the nominal cross-sectional area of the bar. The completed splice obtains ultimate bar strengths and meets or exceeds all existing code requirements.System AdvantagesThe patented Dowel Bar Splicer System has been engineered, tested and proven to meet or exceed all field standards and design/engineering practices. The System is strong, easy to use and readily identified as rebar material. The easy installation requires no special tools or machinery and simplifies the forming operations. There are no “extras,” such as wedges, nuts, collars or couplers required and routine cutting, bending, etc., can be easily handled in the field, if required.The Dayton Superior DBDI Splice System Advantages:• Strong • Safe• Easy to Use• Eliminates Protruding Dowels• Improves Forming Costs• Reduces Forming and Stripping Hassles• Saves Forms By Eliminating Drilling Holes• No Forming Required.System ComplianceThe DBDI Splice System complies with the following standards/specifications:• ACI 318 Type 2• IAPMO Evaluation Report ER-0321• State Departments of Transportation• Ministries of Transportation (Canada)• Caltrans Ultimate Splice• City of Los Angeles Department of Building and Safety• Army Corps of Engineers CW03210• AASHTO• International Building Code (IBC).Typical Splicing SpecificationThe Dayton Superior DBDI Splice System, consisting of the Dowel Bar and Dowel-In, shall be used in splicing of rebar. The DBDI System shall be forged from deformed rebar material, free of external welding and machining. It shall be furnished with an integral nailing flange and threaded with UNC or UN thread to a depth, at minimum, equal to the nominal thread diame-ter. The Dowel-In shall be fabricated from deformed rebar material with thread corresponding to the Splicer. The completed splice shall meet Type 2 tensile requirements of American Concrete Institute Specification 318, Building Code Requirements for Reinforced Concrete and the Corps of Engineers Specification CW03210, Civil Works Construction Guide Specification for Steel Bars, Welded Steel Wire Fabric and Accessories for Concrete Reinforcement.

REBAR SPLICING SYSTEM

44

*U.S. Patent No. 4,619,096

Specified or Required Dowel Bar Recommended Dowel Bar Splicer and Dowel-In Bar Size Grade 60 Rebar Loads (lbs.) System DB-SAE Dowel- System Completed Splice (lbs.) Thread Bar InBar Stress US Metric (mm) CN (M) Py 1.25 Py Size* Size Size Area (min.) Py 1.25 Py 100% Pu #4 [13] [10] 12,000 15,000 5/8” - 11 #4 #4 .20 12,000 15,000 18,000 #5 [16] [15] 18,600 23,250 3/4” - 10 #5 #5 .31 18,600 23,250 27,900 #6 [19] [20] 26,400 33,000 7/8” - 9 #6 #6 .44 26,400 33,000 39,600 #7 [22] — 36,000 45,000 1” - 8 #7 #7 .60 36,000 45,000 54,000 #8 [25] [25] 47,400 59,250 1-1/8” - 8 #8 #8 .79 47,400 59,250 71,100 #9 [29] [30] 60,000 75,000 1-1/4” - 8 #9 #9 1.00 60,000 75,000 90,000 #10 [32] — 76,200 95,250 1-7/16” - 8 #10 #10 1.27 76,200 95,250 114,000 #11 [36] [35] 93,600 117,000 1-9/16” - 8 #11 #11 1.56 93,600 117,000 140,400Py = Minimum Yield Strength of bar. Pu = Minimum Tensile Strength of bar. *5/8”, 3/4”, 7/8” and 1” sizes have UNC Threads. 1-1/8” and larger sizes are equipped with UN Threads.


REBAR CHAIRS / SPACERS

45www.spec-west.com

Aztec® Tower Chair™ - PTC• Standard “Concrete Gray” color.• Minimal surface contact.• Designed for maximum aggregate flow and concrete consolidation.• Fits up to #8 rebar.• Tower chair straddles lower rebar mat in double mat applications.

Code Cover122835 1-1/2” - 1-3/4”121284 2” - 2-1/4”122837 2-1/2” - 2-3/4”121285 3” - 3-1/4”122839 3-1/2” - 3-3/4”122840 4” - 4-1/4”123562 4-1/2” - 4-3/4”123563 5” - 5-1/4”123564 5-1/2” - 5-3/4”123565 6” - 6-1/4”

Aztec® Space Wheel - PSW• Designed to fit a wide range of bar and wire mesh sizes.• Minimal surface contact.• Standard “Concrete Gray” color.• Lightweight.

Code Cover Bar Size121314 3/8” Fits Mesh121315 1/2” Fits Mesh121316 3/4” Up to #2 121317 3/4” Fits #2-#4 121318 1” Up to #2 121319 1” Fits #3-#6121320 1-1/4” Up to #2121321 1-1/4” Fits #3-#6121322 1-1/2” Up to #2121323 1-1/2” Fits #3-#6121324 2” Up to #2121325 2” Fits #3-#6121326 2-1/2” Up to #2121327* 3” Up to #2121328 3” Fits #3-#6

*Overall diameter is 6”

Aztec® E-Z Chair® - PEZ• Standard “Concrete Gray” color (custom colors available).• Minimal surface contact.• Designed for maximum aggregate flow and concrete consolidation.• High load capacity.• Fits up to #8 rebar.• Does not straddle bottom rebar mat in double mat applications (for

straddling applications, see Tower Chair).

Code Cover127667 3/4”127651 1” 127673 1-1/4” 127660 1-1/2” 127662 1-3/4” 127668 2” 127652 2-1/4”127674 2-1/2”

Code Cover127653 2-3/4” 127663 3” 127675 3-1/4”127669 3-1/2” 127654 3-3/4”127676 4”127655 4-1/4”127664 4-1/2”

Code Cover127677 4-3/4”127670 5”127656 5-1/4”127678 5-1/2”127657 5-3/4”127665 6”

Aztec® Castle Chair™ - PCC• Heavy-duty, stackable design.• Fits up to #8 rebar.• Perfect for use on insulating foam or nonpenetrable vapor barriers.• Most stable on-grade chair available.• Supports over 500 Ibs.• Each chair comes in two height combinations reducing inventory.

Aztec® E-Z Lok Wheel™ - PLW• Multiple hub diameter for rebar sizes #3 to #11.• Designed for medium to heavy-duty projects.• Wider locking hub eliminates “racking” and will not fall off.• Industry choice for use in heavy columns.• Once locked onto rebar, this wheel will not change shape and will always provide uni-

form cover.Application: Side-Form Spacer

Application: On-Grade, Single Mat Rebar or Wire Mesh, Bottom Layer Double Mat Rebar or Wire Mesh, Precast, Tilt-Wall, Insulated “Sandwich” Panels

Application: Single Mat Rebar or Wire Mesh, Bottom LayerDouble Mat Rebar or Wire Mesh, Tilt-Wall, Side-Form Spacer, On-Grade: when used with Sand Plate

Application: Single Mat-Rebar or Wire Mesh, Bottom Layer Double Mat-Rebar or Wire Mesh, Tilt Wall, Side-Form Spacer, On-Grade: when used with Sand Plate

Application: Side-Form Spacer

Code Cover Bar Size122841 1-1/2” #3 / #4122842 1-1/2” #5 / #6122843* 1-1/2” #3 / #4122844* 1-1/2” #5 / #6220392 2” #3 / #4 220388 2” #4 / #5 122845* 2-1/2” #3 / #4 122846* 3” #3 / #4 122847* 3” #5 / #6 220389* 4” #5 / #6 220391 4” #8 143316 4-1/2” #9 143428 4-1/2” #11 143317 5-1/2” #9 143429 5-1/2” #11 143318 6-1/2” #9 143430 6-1/2” #11

*Heavy-duty

Note: Concrete cover is defined as the distance from where the reinforcement sits in the hub of the wheel to the outside of the wheel (where it contacts the form).Meets all requirements and qualifies as a CRSI Class 1 Bar Support.

Code Cover122821 2-3/4”122822 3”122823 3-1/4”122824 3-1/2”122825 3-3/4”121290 4”121291* 4-1/4” - 4-1/2”121292* 4-3/4” - 5”121293* 5-1/4” - 5-1/2”121294* 5-3/4”121295 6”121296* 6-1/4” - 6-1/2”121297* 6-3/4” - 7”121298* 7-1/4” - 7-1/2”121299* 7-3/4” - 8”121300 7-3/4” - 8”121301* 8-1/4” - 8-1/2”121302* 8-3/4” - 9”121303* 9-1/4” - 9-1/2”121304* 9-3/4” - 10”

*Multiple height combinations and comes pre-assembled

DIVISIO

N3 .2

METAL INDIVIDUAL SUPPORTS

46

HC-GW HC-1 HC-1 HC-3 Galv. Plastic Plastic HC-1A Plain Wire Tipped Dipped Epoxy Size Code Code Code Code Code 2” 73100 73101 73106 73103 73107 2-1/4” 73110 73111 73116 73113 73117 2-1/2” 73120 73121 73126 73123 73127 2-3/4” 73130 73131 73136 73133 73137 3” 73140 73141 73146 73143 73147 3-1/4” 73150 73151 73156 73153 73157 3-1/2” 73160 73161 73166 73163 73167 3-3/4” 73170 73171 73176 73173 73177 4” 73180 73181 73186 73183 73187 4-1/4” 73190 73191 73196 73193 73197 4-1/2” 73200 73201 73206 73203 73207 4-3/4” 73210 73211 73216 73213 73217 5” 73220 73221 73226 73223 73227 5-1/4” 73230 73231 73236 73233 73237 5-1/2” 73240 73241 73246 73243 73247 5-3/4” 73250 73251 73256 73253 73257 6” 73260 73261 73266 73263 73267 6-1/4” 73270 73271 73276 73273 73277 6-1/2” 73280 73281 73286 73283 73287 6-3/4” 73290 73291 73296 73293 73297 7” 73300 73301 73306 73303 73307 7-1/4” 73310 73311 73316 73313 73317 7-1/2’ 73320 73321 73326 73323 73327 7-3/4” 73330 73331 73336 73333 73337 8” 73340 73341 73346 73343 73347 8-1/4” 73350 73351 73356 73353 73357 8-1/2” 73360 73361 73366 73363 73367 8-3/4” 73370 73371 73376 73373 73377 9” 73380 73381 73386 73383 73387 9-1/4” 72700 — 72706 — 72707 9-1/2” 72710 — 72716 72713 72717 9-3/4” 72720 — 72726 — 72727 10” 72730 — 72736 72733 72737 10-1/4” 72740 — 72746 — 72747 10-1/2” 72750 — 72756 — 72757 10-3/4” 72760 — 72766 — 72767 11” 72770 — 72776 — 72777 11-1/4” 72780 — 72786 — 72787 11-1/2” 72790 — 72796 — 72797 11-3/4” 72800 — 72806 — 72807 12” 72810 — 72816 — 72817

Application: To support reinforcing bar or wire mesh during concrete placement in Flat Slab, Tilt Wall Panel, Elevated Slabs, Precast Panels projects, to maintain proper concrete coverage.

Individual High Chair - HCDayton Superior’s Individual High Chair is used to support upper steel directly or by means of a carrier bar. Available in 2” to 15” heights in bright basic, plastic protected, epoxy-coated, or galvanized wire.• Formed cradle for placing reinforcing bar.• Designed to resist deformation under construction loading.• Wide leg span to allow chair to straddle lower bars.• Foot designed for use on multiple forming surfaces. Plastic Dipped and

Plastic Tipped chairs designed for exposed conditions, i.e. Tilt Wall Panels.

Supports for Rebar and Wire MeshDayton Superior manufactures a complete line of rebar and/or mesh supports. All Dayton Superior rebar supports are manufactured to the recommendations or specifications of the Concrete Reinforcing Steel Institute (CRSI). Supports are available bright basic, plastic protected, epoxy coated and stainless steel for various corrosion resistance protection. Dayton Superior rebar supports are shipped in convenient cartons, bundles or on skids and are clearly identified.

Application: Support reinforcing steel over loose compacted soil base, rock base, sand base or carton forms during normal construction.

Cover Height: 2” to 12” on 1/4” increments.

Cover Height: Available in heights of 2” to 15” in increments of 1/4”. Chairs over 12” require cross bracing or lacing of legs.

Individual High Chair With Plates - HCP• Formed cradle for placing reinforcing bar.• 1” Wide steel plates (2) provide bearing surface to allow high chair to

remain at elevation.• Available in epoxy coated or hot dipped galvanized finish on special

order basis.

HC-3Plain

HC-1Plastic Tipped

HC-1AEpoxy

HC-1Plastic Dipped

HCPwith Plates

HCPwith Plates - Epoxy

Size Code Size Code 2” 73005 7” 73308 2-1/4” 73007 7-1/4” 73318 2-1/2” 73012 7-1/2” 73328 2-3/4” 73014 7-3/4” 73338 3” 73015 8” 73348 3-1/4” 73017 8-1/4” 73358 3-1/2” 73025 8-1/2” 73368 3-3/4” 73027 8-3/4” 73378 4” 73028 9” 73388 4-1/4” 73198 9-1/4” — 4-1/2” 73208 9-1/2” — 4-3/4” 73218 9-3/4” — 5” 73228 10-1/4” — 5-1/4” 73238 10-1/2” — 5-1/2” 73248 10-3/4” — 5-3/4” 73258 11” — 6” 73268 11-1/4” — 6-1/4” 73278 11-1/2” — 6-1/2” 73288 11-3/4” — 6-3/4” 73298 12” —


WIRE MESH,ANCHOR BOLTS, NAILS

47www.spec-west.com

Styles shown are normally stocked 7 feet wide and 200 feet long. For other widths or lengths contact Spec-West. Note that fabric can be supplied in a square pattern for two-way reinforcing or in a rectangular pattern for one-way reinforcing.

Many engineers and contractors have found sheets superior to rolls in a num-ber of applications. Sheets are particularly helpful where flatness is important, such as in a thin layer of concrete, or where several layers of reinforcing have to be placed or in walls. Sheets come in varied widths and lengths. Listed below are the styles that are normally stocked (in 7’x10’ sheets).6x6 - 10/10 W1.4/W1.46x6 - 6/6 W2.9/W2.9Also available in epoxy coated to meet your state highway specs.

Sheets — Plain & Galvanized

Steel & Wire W-Number Wgt.Spacing Gauge Wire Sizer csf. 6x6 10/10 W1.4/W1.4 21 6x6 6/6 W2.9/W2.9 42

ANCHOR BOLTSWith Nuts andWashers

Cast in place in the tops of foundation walls to securely anchor wood frame structures to foundations.Available in many sizes (Cut thread available)

REINFORCING BAR — Plain & Epoxy#3 through #18, Grade 40 or 60. All sizes and lengths available on request (20’ lengths in stock).Mill certified.

NAILS 40d 30d 20d 16d 12d 10d 9d 8d 7d 6d 5d 4d

1 2 3 4 5 6 7 8 9 10 11 12

13 14 15 16 17 18 19 20 21 22 23

Kinds of Nail Heads

Kinds of Heads1, 2 – Oval Countersunk3 – Oval4 – Round5 – Flooring Brad6 – Duplex7, 10, 11 – Flat Countersunk8, 9 – Flat12 – Cupped13 – Metal Lath14 – Hoop Fastener15 – Tie and Pole-Dating16 – Umbrella17 – Lead Head18 – Staple19 – Brad20 – Headless (Dowel Pin)21 – Anchor – Scaffold (Double-Headed)22 – Shade Roller Pin23 – Curved

WIRE MESH Rolls — Plain

DIVISIO

N3 .2

CURING BLANKETS,REBAR, TIES & MESH

CONCRETE CURING BLANKETS

REBAR

48

Features• High density woven PE envelope coated on both sides for extreme vapor

retarding properties. Low perm rating of 0.87.• Woven PE webbing is sewn all around securing insulation layers to envelope

preventing insulation movement.• Full edge to edge design with zero insulation voids at the hems.• PE webbing is perforated with eyelets spaced at 10.0cm intervals – blankets can

be fastened together, or to scaffolding or forms.• Can be used as an insulated tarp when installed on scaffolding. (Note – Grip-Rite extreme blankets are not flame retardant. Check local fire codes before installing.)

New Designation Old Designation Approx. Weight (by W-number) (by Steel Wire Gauge) per 100 sq. ft. 6x6 - W1.4xW1.4 6x6 - 10x10 21 lb. 6X6 - W2xW2 6x6 - 8x8* 29 lb. 6x6 - W2.9xW2.9 6x6 - 6x6 42 lb. 6x6 - W4xW4 6x6 - 4x4 58 lb. 4x4 - W1.4xW1.4 4x4 - 10x10 31 lb. 4x4 - W2xW2 4x4 - 8x8 43 lb. 4x4 - W2.9xW2.9 4x4 - 6x6 62 lb. 4x4 - W4xW4 4x4 - 4x4 86 lb. 6x6 - W1.4xW1.4 6x6 - 10x10 21 lb. 6x6 - W2xW2 6x6 - 8x8* 29 lb. 6x6 - W2.9xW2.9 6x6 - 6x6 42 lb.

Nominal Size R-Value on R-Value with Master Pallet Top Load Qty/Truckload SKU Description Thickness Cut Finish Surface Air Space Pack Quantity Quantity (+/-10%) XR1625GR 1 Layer Foam 1/4” 6’ x 25’ 5’ 8” x 24’ 5” 1.08 3.13 8 64 352 1760 XR11225GR 1 Layer Foam 1/4” 12’ x 25’ 11’ 6” x 24’ 5” 1.08 3.13 4 32 176 880 XR2625GR 2 Layer Foam 3/8” 6’ x 25’ 5’ 8” x 24’ 5” 1.37 3.30 5 40 110 990 XR21225GR 2 Layer Foam 3/8” 12’ x 25’ 11’ 6” x 24’ 5” 1.37 3.30 2 16 88 440 XR3625GR 3 Layer Foam 1/2” 6’ x 25’ 5’ 8” x 24’ 5” 1.50 3.43 4 30 180 780 XR31225GR** 3 Layer Foam 1/2” 12’ x 25’ 11’ 6” x 24’ 5” 1.50 3.43 2 15 96 396 XR4625GR 4 Layer Foam 3/4” 6’ x 25’ 5’ 8” x 24’ 5” 2.18 3.80 3 21 66 528 XR5625GR 5 Layer Foam 1” 6’ x 25’ 5’ 8” x 24’ 5” 2.63 4.04 2 17 96 436 XRB625GR Bubble/Foam 1/2” 6’ x 26’ 5’ 8” x 24’ 5” 2.03 3.82 1 — 730 730 XRB1225GR Bubble/Foam 1/2” 12’ x 26’ 11’ 6” x 24’ 5” 2.03 3.82 1 — 350 350

Extreme Concrete Curing BlanketsGrip-Rite Extreme Concrete Curing Blankets® are a woven poly tarpaulin envelope with internal insulation secured all around by a patent pending reinforced webbing design. Extreme blankets are designed for use in cold weather concreting applications as an insulated cover to maintain the heat of hydration during the early stages of concrete curing.

Bar Size Bar Size Weight Weight per Length Number of Pieces per ton Inch Metric per Foot 20 ft. 30 ft. 40 ft. 60 ft. 20 ft. 30 ft. 40 ft. 60 ft. #3 #10 0.376 lb. 7.52 lb. 11.28 lb. 15.04 lb. 22.56 lb. 266.0 177.3 133.0 88.7 #4 #13 0.668 lb. 13.36 lb. 20.04 lb. 26.72 lb. 40.08 lb. 149.7 99.8 74.9 49.9 #5 #16 1.043 lb. 20.86 lb. 31.29 lb. 41.72 lb. 62.58 lb. 95.9 63.9 47.9 32.0 #6 #19 1.502 lb. 30.04 lb. 45.06 lb. 60.08 lb. 90.12 lb. 66.6 44.4 33.3 22.2 #7 #22 2.044 lb. 40.88 lb. 61.32 lb. 81.76 lb. 122.64 lb. 48.9 32.6 24.5 16.3 #8 #25 2.670 lb. 53.40 lb. 80.10 lb. 106.80 lb. 160.20 lb. 37.5 25.0 18.7 12.5 #9 #29 3.400 lb. 68.00 lb. 102.00 lb. 136.00 lb. 204.00 lb. 29.4 19.6 14.7 9.8 #10 #32 4.303 lb. 86.06 lb. 129.09 lb. 172.12 lb. 258.18 lb. 23.2 15.5 11.6 7.7 #11 #36 5.313 lb. 106.26 lb. 159.39 lb. 212.52 lb. 318.78 lb. 18.8 12.5 9.4 6.3 #14 #43 7.650 lb. 153.00 lb. 229.50 lb. 306.00 lb. 459.00 lb. 13.1 8.7 6.5 4.4 #18 #57 13.600 lb. 272.00 lb. 408.00 lb. 544.00 lb. 816.00 lb. 7.4 4.9 3.7 2.5

ASTM Standard Reinforcing Bars

Common Styles of Welded Wire Fabric

Rolls

Shee

ts

*Exact W-number size for 8 gauge is W2.1.**Generally stocked during the winter months.

Concrete Construction Accessories

Bars Ties(6” & 8”)


49www.spec-west.com

DIVISIO

N3 .3Cast-In-Place Concrete


Concrete Curing & Sealing

Hardeners / Retardants

Set Accelerators

Release & Bonding Agents

Expansion Joint / Joint Cap

Fasteners / Anchors

Holdowns

Foundation Straps

Purlin Anchors

Wet Post Anchors

Column Bases

Grout

Repair Mortar

Vapor Barrier

Polyethylene Film

Screed Posts

Duplex Screws

Anchor Bolts

Sprayers

Concrete Testing Equipment

CONCRETE CURING & SEALING

1100-CLEAR – Resin-Based, Water Emulsion Concrete Curing CompoundThe 1100-CLEAR series has been used on both interior and exterior applications where paint, resilient tile, or resilient flooring may be applied later. FEATURES/BENEFITS• When properly applied, produces a premium-grade film, which optimizes water

retention.• Furnished as a ready-to-use, true water-based compound.• Produces hard, dense concrete … minimizes hair checking, thermal cracking, dusting, and other defects.• Offers a compressive strength significantly greater than improperly cured or uncured concrete.• Increases tensile strength for greater resistance to cracking and

surface crazing.• Improves resistance to abrasion and the corrosive actions of salts and

chemicals.• Minimizes excessive shrinkage.• Can be applied quickly and easily with conventional commercial spray

equipment.• Formulations also available with red fugitive dye added.• VOC compliant.PACKAGING5 Gallon (18.93 L) Pails, 55 Gallon (208.20 L) Drums

50

1200-WHITE – Water-Based, Resin-Based Concrete Curing Compound1200-WHITE is intended for application on highways, airports, streets and bridge decks. The product provides optimum curing when protection from the sun’s heat is desired. FEATURES/BENEFITS• When properly applied, provides a premium-grade film, which optimizes water

retention.• Protects by reflecting the sun’s rays to keep the concrete surface

cooler and prevent excessive heat buildup, which can cause thermal cracking.• Furnished as a ready-to-use, true water-based compound.• Produces hard, dense concrete … minimizes hair checking, thermal cracking, dusting, and other defects.• Enhances the functional capabilities of concrete by “sealing in” the

performance assets of strength and long life.• Offers a compressive strength significantly greater than improperly or

uncured concrete.• Increases tensile strength for greater resistance to cracking and

surface crazing.• Improves abrasion resistance and minimizes corrosive action of salts

and chemicals … minimizes shrinkage.• Applies quickly and easily with conventional commercial spray

equipment.• VOC compliant.PACKAGING5 Gallon (18.93 L) Pails, 55 Gallon (208.20 L) Drums

VOCOMP® -20, -25 and -30 – Water-Based, Acrylic, Concrete Curing and Sealing CompoundsVOCOMP-20 (20% solids) water-based acrylic curing and sealing compound may be quickly and easily applied to simultaneously cure and/or seal new interior or exterior as well as vertical or horizontal concrete surfaces. It is ideal for application on commercial and industrial floors, sidewalks, basement and garage floors, multi-level parking decks, patios, driveways, and parking areas. VOCOMP-20 dries very quickly to protect and enhance the natural appearance of concrete.

VOCOMP-25 (25% solids) may be used wherever a medium-to-high sheen is desired to bring out the natural beauty of concrete without discoloring, checking, or peeling. It may be applied to simultaneously cure, seal, and dustproof new, old, interior, exterior, horizontal, and vertical concrete surfaces. VOCOMP-25 is ideal for curing, sealing, and dustproofing driveways, sidewalks, patios, swimming pool areas, and commercial and industrial floors. Horizontal surfaces protected with VOCOMP-25 offer excellent wearing qualities for foot and vehicular traffic. If, after prolonged usage, traffic patterns appear, the surface can be washed clean and recoated to restore the original beauty. Good concrete and good concreting practices should be followed, as VOCOMP-25 is not a cure-all for improperly mixed or placed concrete.

VOCOMP-30 (30% solids) may be used wherever a thicker film, with a medium-to-high sheen, is desired to bring out the natural beauty of concrete without discoloring, checking, or peeling. When properly applied, VOCOMP-30 provides a premium-grade seal for superior moisture protection. It may be applied to simultaneously cure, seal, and dustproof new, old, interior, exterior, horizontal, and vertical concrete surfaces. VOCOMP-30 is ideal for curing, sealing, and dustproofing driveways, sidewalks, patios, swimming pool areas, and commercial and industrial floors. Horizontal surfaces protected with VOCOMP-30 offer excellent wearing qualities for foot and vehicular traffic. If, after prolonged usage, traffic patterns appear, the surface can be washed clean and recoated to restore the original beauty. Good concrete and good concreting practices should be used, as VOCOMP-30 is not a cure-all for improperly mixed or placed concrete.FEATURES/BENEFITS• Permeable film allows moisture in cured concrete to evaporate.• Ready-to-use, non-yellowing, water-based compound that cures and/or

seals concrete in one quick and easy application.• Protects and enhances the natural appearance of concrete.• Tough, durable finish resists chemicals, petroleum and abrasives.• Tools may be cleaned with soap and water.• VOC compliant.PACKAGING1 Gallon (3.79 L) Units (4 per case), 5 Gallon (18.93 L) Pails,55 Gallon (208.20 L) Drum


CONCRETE HARDENER

LIQUI-HARD® ULTRA – Molecular Concrete Densifier and Chemical HardenerLIQUI-HARD ULTRA concrete densifier and chemical hardener is a waterborne, lithium-silicate-based, ready-to-use, colorless liquid, which hardens and dustproofs concrete at a molecular level. After proper application, the finished surface offers substantial improvement in abrasion and chemical resistance and will significantly improve the durability of the surface when compared to untreated concrete. As LIQUI-HARD ULTRA is applied and penetrates into the concrete surface, a chemical reaction takes place, producing a byproduct that fills in the pores of the concrete. LIQUI-HARD ULTRA solidifies the concrete, eliminating dusting and pitting.LIQUI-HARD ULTRA is chemically engineered to provide timely, quick, sustainable performance. The product is simply sprayed on and then left moist on the surface for 20 minutes. In this short period of time, the colorless liquid quickly penetrates into the surface. After application, the resulting surface features enhanced protection and sheen, coupled with superior abrasion resistance. This environmentally safe, water-based product features a zero VOC content and provides an attractive option in green building applications.LIQUI-HARD ULTRA is recommended for use wherever hardened, dustproofed, and improved chemical and abrasion resistant surfaces are required. Ideal applications include floors in restaurants, industrial plants, warehouses, storage silos, sewage plants, chemical processing facilities, refineries, and heavy pedestrian floor traffic areas, such as civic centers, sports arenas, stadiums, hospitals, airports, and museums. LIQUI-HARD ULTRA can successfully be used in conjunction with shake-on hardeners. The INDUROSHINE polished concrete system combines green concrete polishing and diamond grinding equipment with LIQUI-HARD ULTRA to create a unique, high sheen, wear-resistant concrete floor. Also works well on concrete countertops. FEATURES/BENEFITS• Penetrates deeply into concrete to densify and harden surfaces to help

prevent entry of moisture and other foreign matter.• Quick, easy application procedure (no flushing/rinsing required).• Improved freeze/thaw resistance.• Dustproofs and improves chemical, petroleum, and abrasion

resistance of treated surfaces.• Provides a permanent, attractive sheen with the ability to polish.• Protects against scratching or peeling.• Provides tough, protected surface that won’t yellow, discolor, or show

pedestrian or vehicular traffic wear marks.• Improves light reflectance.• May be burnished.• Compatible with BELLATRIX® for an enhanced concrete floor.• Ready to use from container and easy to apply.• Saves time on the polishing/burnishing process.• Indoor or outdoor use. • Environmentally safe, non-hazardous.• VOC content is 0.00 g/L.PACKAGING5 Gallon (18.93 Liter) Pails, 55 Gallon (208.20 Liter) Drums

51www.spec-west.com

MED-CURE™ – Concrete Curing Aid & HardenerMED-CURE concrete curing aid was specially formulated to supplement the W. R. MEADOWS line of curing compounds and provide the contractor with a good, general purpose curing aid for construction applications where economy is of prime importance. It contains no wax, resin, or solvent.MED-CURE is ideal as a curing aid, as well as for hardening and dustproofing exposed concrete floor slabs, sidewalks, driveways, beams, columns, etc. It can be used to provide a hard, dust-free surface on concrete floors to be painted or covered by resilient, carpeted, wood, or synthetic flooring.FEATURES/BENEFITS• Penetrates to aid curing, as well as to harden concrete in one easy

application.• Provides a low maintenance, finished surface.• Tint aids in identifying coverage.• Ideal for new, old, interior, exterior, horizontal, and vertical concrete surfaces.• Dries fast and may be recoated if desired.• Application tools may be cleaned with water.• VOC compliant … actual VOC content is 0.SPECIFICATIONS• Complies with all current federal, state, and local maximum allowable

VOC requirements, including U.S. EPA, SCAQMD, and OTC.PACKAGING5 Gallon (18.93 Liter) Pails55 Gallon (208.20 Liter) Drums275 Gallon (1040.99 Liter) TotesCOVERAGEBroomed Surface: 400 ft.²/gal. (9.82 m²/L)Troweled Surface: 600 ft.²/gal. (14.73 m²/L)APPLICATIONNew Concrete: Apply MED-CURE as soon as surface water has disappeared and the surface is dry to the touch or hard enough to walk on. Apply one even coat with a pressure hand sprayer or paint roller.Existing (Old) Concrete: Clean surface thoroughly with a trisodium phosphate solution and rinse thoroughly. Apply MED-CURE after the surface has dried. NOTE: Keep heavy traffic off surface for 24-48 hours after applying MED-CURE.CLEANUPApplication equipment may be cleaned easily with soap and water while still wet.PRECAUTIONSDO NOT DILUTE. Do not apply if the temperature of the concrete is less than 40ºF (4ºC). KEEP FROM FREEZING. If MED-CURE is accidentally sprayed or spilled on glass, brick, aluminum, painted surfaces, etc., flush immediately with water. Do not over-apply.

DIVISIO

N3 .3

RETARDANTS & SET ACCELERATOR

52

TOP-STOP™ – Spray-Applied, Water-Soluble Surface RetarderTOP-STOP temporarily halts the set of Portland cement at the surface while the concrete below the surface cures normally. TOP-STOP may be used to produce an architectural finish on concrete slabs by exposing the natural color and texture of the aggregate. TOP-STOP exposes the aggregate on floor slabs, sidewalks, tilt-up and precast panels, or any normal horizontal concrete application. TOP-STOP produces roughened bonding surfaces for subsequent concrete toppings and roughens horizontal surfaces for construction joints in power plants, dams, and other civil engineering projects.FEATURES/BENEFITS• Architectural-quality appearance with original color and texture of the

aggregate without sandblasting.• Easy, economical removal of the concrete surface without laborious

chipping or blasting required.• No danger of acid residue from strong washing compounds.• Easy to use. No expensive equipment required.• Uniform coverage results in uniform aggregate exposure.• Easy water cleanup. • VOC compliant … actual VOC content is 0. PACKAGING: 1 Gallon Units, 5 Gallon Pails

EVAPRE™ – Evaporation RetardantEVAPRE is specifically designed to form a thin monomolecular film to reduce rapid moisture loss from the concrete surfaces prior to curing. EVAPRE is ideal for use as an evaporation retardant for concrete surfaces where the evaporation rate exceeds the rate of bleeding. When applying surface hardeners, EVAPRE can be used after screeding and after the first floating operation, if necessary.FEATURES/BENEFITS• Significantly reduces plastic shrinkage and cracking caused by

evaporation in low humidity, high temperatures, and high winds.• Allows use of lower slump and lower water:cement ratio concrete.• Provides smooth and durable concrete flatwork.• Reduces wind crusting, stickiness, and sponginess, which often cause

poor and uneven surface texture.• Allows finishing crews to adhere to established schedules.• Reduces overall cost because timing of finishing operations is less

critical.• VOC compliant. • Helps minimize surface cracking.PACKAGING: 45 Oz. Containers, 1 Gallon Units, 5 Gallon Pails,55 Gallon Drums

HYDRASET-FREE accelerates initial set time one to three times faster than normal for mortar and concrete. HYDRASET-FREE should not be limited to use during months when temperatures are in the 20° to 45°F (-7° to 7°C) range. Increased workability and earlier strength are also obtained when temperatures are in the 50° to 65°F (10° to 18°C) range.

FEATURES/BENEFITS• Accelerates initial set time one to three times faster than normal for

concrete and mortar. • Speeds up hydration of cement.• Non-chloride formula.• Allows earlier removal of concrete forms or other protection.• Permits earlier finishing. • VOC compliant.PACKAGING: 5 Gallon Pails, 55 Gallon Drums

FINISHING AID

LYTHIC DAY1 (Finishing Aid)Lythic Day1 is a colloidal silica-based compound that acts as a troweling aid, curing agent, and a substitute for a membrane-forming curing compound. It is shipped as a concentrate and diluted with water at a 4:1 ratio to make a working solution with a coverage of approximately 1,000sf/gal. The solution is spray-applied to freshly laid concrete before it is worked by the power-trowel. Lythic Day1 reacts with the calcium hydroxide in the concrete to form additional CSH, becoming a permanent part of the slab surface. It does not form a film or membrane and reduces drag, increasing the

speed of the power-trowel. Day1 slows surface evaporation, as well, giving finishers between 15 and 45 minutes longer to finish the slab. It is a multifaceted treatment that increases the performance of your concrete. It improves curing, aids in finishing, and resists liquid penetration while becoming an integral part of the concrete slab.LY1001 - 1 GallonLY1005 - 5 Gallon


HYDRASET-FREE® – Non-Chloride Concrete Set Accelerator

FORM RELEASE& BONDING AGENT

53www.spec-west.com

DUOGARD® II – Water-Based Form Release AgentDUOGARD II form release agent is composed of organic chemicals emulsified in water that react with the alkali content of concrete to form a release film that effectively prevents the bonding of the concrete to the form. In addition, the product also contains a high molecular weight, non-reactive, chemically inert ingredient to assist in clean, quick form release and removal. This exclusive combination of physical and chemical reactive components provides a doubly effective separation … DUO … and the ultimate in form release efficiency.DUOGARD II form release agent can be used on various types of forms (wood and steel, as well as fiberglass, aluminum and fiber tubes). For fiber tube forms, DUOGARD II should be applied, even though the forms may be pre-coated. The application of DUOGARD II will allow the fiber tubes to strip much easier, even 60 to 90 days later. If tubes are stripped in 5 to 10 days, hand rubbing is greatly facilitated when the tubes are coated with DUOGARD II.FEATURES/BENEFITS• Can be safely used inside or outside.• Produces a better and cleaner cast when applied on prestressed and

precast concrete forms.• Cuts stripping time to an absolute minimum.• Reduces form cleaning and repairing.• Increases wood form life, prevents rust, rustproofs metal forms.• Effectively minimizes concrete buildup on pavers, R/M trucks, mixers,

spreader-finishers, buggies, chutes and other equipment.• Breaks concrete bond between surface and form cleanly and

effectively … leaves smooth surface.• Will not stain or discolor concrete and can be painted over.• Ready to use … requires no additional mixing.• Minimizes surface voids.• VOC compliant.PACKAGING: 5 Gallon Pails 55 Gallon Drums

DUOGARD® – VOC COMPLIANT Form Release AgentDUOGARD multi-reactive form release is composed of an organic chemical that reacts with the alkali content of concrete to form a release film that effectively inhibits the bonding of the concrete to the form. In addition, the product also contains a high molecular weight, non-reactive, chemically inert ingredient to assist in clean, quick form release and removal. These exclusive ingredients combine the effectiveness of a chemically reactive type and an inert barrier type to provide a doubly effective separation … DUO … and the ultimate in form release. DUOGARD can be used on forms such as wood, steel, aluminum, fiberglass-reinforced, all grades of plywood (pre-oiled, overlaid, LDO, NDO, HDO), epoxy-coated, and urethane-coated, as well as fiber tubes. DO NOT USE on expanded polystyrene (foam), rubber, latex, or latex forms made from SBR or natural rubber. Wood forms should be saturated prior to first use. DUOGARD should be applied to fiber tube forms even though they may be pre-coated. Tubes will strip much easier, even 60 to 90 days later. FEATURES/BENEFITS• Provides a better and cleaner cast when applied on pre-stressed and

precast concrete forms.• Cuts stripping time to an absolute minimum.• Reduces form cleaning and repairing.• Increases wood form life, prevents rust, rustproofs metal forms.• Effectively minimizes concrete buildup on pavers, R/M trucks, mixers,

spreader-finishers, buggies, chutes and other equipment.• Prevents bonding between poured concrete and the form.• Breaks concrete bond between the surface and the form cleanly and

effectively … leaves smooth surface.• Will not stain or discolor concrete and can be painted over.• Ready to use … requires no additional mixing.• VOC compliant.PACKAGING: 5 Gallon Pails 55 Gallon Drums

ACRY-LOK™ – Acrylic Polymer AdmixtureACRY-LOK is a high-solid, acrylic polymer latex admixture and bonding agent. This milky white liquid is non-yellowing in Portland cement mortars and concrete. When used as an admixture, ACRY-LOK provides increased abrasion, impact and crack resistance, flexural strength, and freeze/thaw tolerance. Permeability is also reduced, providing added protection from chloride intrusion and scaling.ACRY-LOK when used to make a slurry bond coat enhances the bond between the existing concrete and placement of the fresh cement-based concrete topping or repair mortar. ACRY-LOK will not re-emulsify once allowed to fully dry.USESSince ACRY-LOK will not re-emulsify, concrete repairs/mortars fortified with ACRY-LOK are ideal for interior, exterior, and moisture-related applications. Typical areas that would benefit from properties of this

product include concrete, toppings, mortars, grouts, and vertical, horizontal, and overhead patching. For enhanced bonding, useACRY-LOK as an additive in slurry bond coats.FEATURES/BENEFITS• Enhances adhesion – Longer lasting repairs.• Increases flexural strength – Better durability.• Non-re-emulsifiable – Superior performance in a wet environment.• Fortifies internally – Decreases chloride intrusion.• Greater resistance to freeze-thaw and scaling – Better repair

performance.• Multi-purpose applications – Easy to use.• Increases abrasion resistance/Strong, permanent repairs.• Non-yellowing – Aesthetically appealing exterior repairs.PACKAGING: 1 Gallon Unit 5 Gallon Pails 55 Gallon Drums

DIVISIO

N3 .3

EXPANSION JOINT / JOINT CAPS & SEALANT

54

SNAP-CAP® – Expansion Joint CapSNAP-CAP provides a time- and cost-saving method for forming straight, uniform, and debris-free joints of the proper configuration, ready to seal. The top of SNAP-CAP pulls free and can be discarded. The exposed concrete surfaces assure balanced adherence to the sides. It is ideal for both horizontal and vertical concrete projects.

To install, slide SNAP-CAP over the top of the expansion joint. Place the concrete and screed to finish grade as usual. When concrete is cured, insert a screwdriver through the top of SNAP-CAP, pull free and discard. The joint is ready to seal.SIZES Width: 3/8”, 1/2”, 3/4”, 1” Depth: 1/2” Length: 10’

POURTHANE® NS – Non-Sag Joint SealantPOURTHANE NS has very good adhesion to most construction materials. It is particularly recommended for expansion joints between precast concrete panels and seams on wooden, aluminum, and PVC joinery. POURTHANE NS is highly recommended for bonding concrete and baked clay roof tiles. FEATURES/BENEFITS• Ready to use and easy to gun and tool – No mixing and speeds application.• Low VOC content – Approved in all 50 states.• +/- 35% joint movement capability – Maintains flex-

ibility in moving joints.• No primer required for most construction materials – Lower cost.• Maintains excellent weather resistance – Long lasting joint seal.• Delivers a practical service temperature range – For all climates.• Superior bonding – Long lasting baked clay roof tile application.AVAILABLE COLORSLimestone, Stone Gray, Tan, White, Black, BronzePACKAGING: 10.1 Oz. (300 mL) Cartridges, 20 Oz. (592 mL) Sausages, 5 Gal. (18.9 L) Pails, 55 Gal. (208.2 L) DrumsSHELF LIFEWhen stored indoors and in original, unopened containers at temperatures between 41 - 77°F (5 - 25°C), shelf life is a minimum of one year from date of manufacture, except for pails and drums, which have a shelf life of six months.

POURTHANE® SL – Self-Leveling Joint SealantPOURTHANE SL is used to seal horizontal expansion joints in concrete and cementitious slabs, such as sidewalks, balconies, pavement, terraces, warehouses, factories, civil structures, plazas, runways, and pitch pans. FEATURES/BENEFITS• One-component, no mixing.• Self-leveling.• Movement capacity of +/-25%.• Accelerated curing.• Jet fuel resistant.• Permanently elastic.• High durability.• Resists aging and weathering.• Excellent adhesion.• Convenient, easy-to-use packaging.• Low VOC content.AVAILABLE COLORSLimestone, Stone Gray, TanPACKAGING: 20 Oz. (592 mL) Sausages, 29 Oz. (825 mL) Cartridges, 5 Gal. (18.93 L) Pails, 55 Gal. (208.20 L) DrumsSHELF LIFEWhen stored indoors and in original, unopened containers at temperatures between 41 - 104°F (5 - 40°C), shelf life is a minimum of one year from date of manufacture, except for pails and drums, which have a shelf life of six months.

FIBRE EXPANSION JOINT – Multi-Purpose, Expansion-Contraction Joint FillerFIBRE EXPANSION JOINT is composed of cellular fibers securely bonded together and uniformly saturated with asphalt to assure longevity. Wherever a cost-effective joint filler is required, FIBRE EXPANSION JOINT meets the need. It is versatile, resilient, flexible and non-extruding. When compressed to half of its original thickness, it will recover to a minimum of 70% of its original thickness. It will not deform, twist, or break with normal on-the-job handling. FIBRE EXPANSION JOINT is ideal for use on highways, streets, airport runways, sidewalks, driveways, flatwork, and scores of commercial and industrial applications subject to pedestrian and vehicular traffic. FEATURES/BENEFITS• Provides the ideal product for the majority of all expansion/contraction joint requirements.• Non-extruding … versatile … offers a minimum 70% recovery after

compression.• This tough, lightweight, easy-to-use, semi-rigid joint filler is available in

strips and shapes fabricated to your requirements.• Easy to cut … dimensionally stable … not sticky in summer or brittle in

winter.• Provides neat, finished joints requiring no trimming.• Often copied … but never equaled.• Remains the standard of the industry today … with over 80 years of

proven and satisfactory performance.• Can be punched for dowel bars and laminated to thicknesses greater

than 1” (25.4mm).SIZES Thickness: 3/8”, 1/2”, 3/4”, 1” Slab Widths: 36”, 48” Standard Lengths: 10’ Other Available Lengths: 5’, 6’, 12’


FASTENERS / ANCHORS

55www.spec-west.com

1) Predrilled holes are not required.2) Allowable Stress Design (ASD) values have been adjusted for a load duration factor, CD, of 1.6 corresponding to a ten-minute load duration (i.e. wind or earthquake loading) in accordance with the NDS. The ASD loads do not apply to loads of other durations.3) FA3 capacities are based on using a single-ply 2x sill plate.4) Minimum distance of 1.5 x IE ( 6 inches) is required to obtain the listed capacity.

USP Bearing Plates – BPBP – Designed to meet code requirements formudsill-to-foundation.

Plate Dimensions USP Thickness Bolt Stock No. Ref. No. (T) W L Dia. BP12 BP1/2 7 Ga 3/16 2 2 1/2 BP582 BP5/8-2 7 Ga 3/16 2 2 5/8 BP583 BP5/8, BP5/8-3 3 Ga 1/4 3 3 5/8 BP343 BP3/4-3 3 Ga 1/4 3 3 3/4

W

L

T

USP Concrete Form Ties & Wedge – FT & WGFT – Connect 1x and 2x nominal form lumber in low foundation walls up to 4 feet high.WG – V-shaped wedge assures rigidity and consistent form spacing.

USP Ref. Steel Dimensions Footing Width or Stock No. No. Gauge W L Wedge Wall Thickness FT6 WT6 18 5/8 10-5/8 (2) WG 6 FT8 WT8 18 5/8 12-5/8 (2) WG 8 FT10 WT10 18 5/8 14-5/8 (2) WG 10 FT12 WT12 18 5/8 16-5/8 (2) WG 12 WG W1 14 11/16 3-5/8 -- --

L

W

FT

11/16”

WGWedge

(Sold Separately)

USP Anchor Bolts – STBSTB – For monolithic slabs and concrete stem walls.

Identificationstamp andalignmentindicator

Embedmentline

H

L

E

1) May be used with either 3/4” or 1-1/2” forming materials.2) Breaking strength is approximately 775 lbs. Space as necessary to prevent form blow-out.

1) Design loads are based on the average ultimate, from a series of five tests, with a safety factor of three.2) Loads may not be increased for short term loading.3) Minimum center to center spacing between bolts is 3(E) for anchors acting in tension simultaneously.4) Minimum edge distance is 1-3/4”.5) Concrete stemwall shall be a minimum of 6” thick for 5/8” anchor bolts and 8” for 7/8” anchor bolts.

STB

USP Foundation Anchors – FA For installation into concrete slabs.FA3 – The FA3 features a split flange for nailing to both mudsill and stud for greater framing versatility.

3-5/8”

6) End distance shall be no less than 5”.7) Connection limited by lowest of bolt or holdown capacity.8) Concrete block shall be minimum 10” block.

BP

Dimensions (in.) Allowable Tension Loads (lbs.)1,2,3

Min. SDC A & B Wind SDC C-F USP Stemwall Embed. Mid- End Mid- End Mid- End Stock No. Ref. No. Width Dia. L H (E) wall Corner Wall wall Corner Wall wall Corner Wall STB16 SSTB16 6 5/8 17-13/16 5 12-13/16 4230 4230 4230 4230 4230 4230 3525 3525 3525 STB20 SSTB20 6 5/8 21-13/16 5 16-13/16 5120 4740 4740 5115 4230 4230 4265 3555 3555 STB24 SSTB24 6 5/8 25-13/16 5 20-13/16 5990 5915 5915 5990 5570 5570 4990 4675 4675 STB28 SSTB28 8 7/8 31 5 26 10100 9490 9490 9110 9110 9110 7650 7650 7650 STB34 SSTB34 8 7/8 36 6 30 11415 10525 10250 11390 10525 9405 9515 8770 7900 STB36 SSTB36 8 7/8 38 8 30 11415 10525 10250 11390 10525 9405 9515 8770 7900

5) Minimum anchor spacing for full capacity is 2 x lE. For less spacing, reduce capacity proportionally.6) The allowable loads are based on lumber with a specific gravity of 0.50 and a moisture content of 19% or less.7) Uplift deformation based on wood connection strength.8) Minimum concrete strength f’c = 2500 psi 9) NAILS: 10d x 1-1/2” nails are 0.148” dia. x 1-1/2” long.

1”

5-3/4”

4-5/8”

1-1/2” Embossed lines provide guide for matching to edge of form board.

FA3

Dimensions (in.) Fastener Schedule1,9 DF/SP USP Sill Plate Stud Min. Allowable Loads (lbs.)2,3,5,6,7

Plate Stock Ref. Steel Side Top Stem. Install. Uplift F1 F2 iasd Size No. No. Ga. W L IE D Qty Qty Type Qty Type Thick. Type Concrete8 160% 160% 160% (in.)8

Wind and SDC A & B 2 4 10d x 1-1/2 -- -- 6” Mudsill Uncracked 1010 625 735 0.066 Only Cracked 985 545 735 0.064 2 2 10d x 1-1/2 2 10d x 1-1/2 6” Mudsill Uncracked 755 615 465 0.015 & Stud Cracked 755 545 465 0.015 SDC C-F 2 4 10d x 1-1/2 -- -- 6” Mudsill Uncracked 1010 625 735 0.066 Only Cracked 845 470 645 0.055 2 2 10d x 1-1/2 2 10d x 1-1/2 6” Mudsill Uncracked 755 615 465 0.015 & Stud Cracked 755 470 465 0.015

2 x 4 or 2 x 6

FA3 MAS 16 1-1/2 4-5/8 4 1

2 x 4 or 2 x 6

FA3 MAS 16 1-1/2 4-5/8 4 1

DIVISIO

N3 .3

HOLDOWNS

56

USP Holdowns – TDXTDX – The TDX2 and TDX5 feature formed designs, all others are welded. All are self jigging.

Dimensions (in.) Fastener Schedule4 Min. Length DF/SP Anchor Bolts Required of Bolt Allowable Tension USP Ref. Steel Bolt Bolt End in Vertical Loads (lbs.)1,2,3

Stock No. No. Gauge W H D CL Dia. Qty Dia. Distance5 Member 160% i (in)1,2,3

1-1/2” 1910 0.150 6

TDX2-TZ HD3B 12 2-1/16 8-1/8 2-3/4 1-1/2 5/8 2 5/8 4-1/2 3” 2345 0.167 6

3-1/2” 3130 0.140 6

5-1/2” 3130 0.140 6

1-1/2” 2350 0.134 6

TDX5 -- 10 2-1/2 9-3/8 3-7/8 2 3/4 2 3/4 5-1/4 3” 3260 0.179 6

3-1/2” 3260 0.179 6

5-1/2” 3260 0.179 6

1-1/2” 2765 0.091 6

TDX6 HD5B 7 3-1/2 11-1/8 3-3/4 2 7/8 2 7/8 6-1/8 3” 5320 0.180 6

3-1/2” 5355 0.182 6

5-1/2” 5355 0.182 6

1-1/2” 4065 0.123 6

TDX8 -- 7 3-1/2 14-5/8 3-3/4 2 7/8 3 7/8 6-1/8 3” 7120 0.180 6

3-1/2” 7120 0.180 6

5-1/2” 7120 0.180 6

1-1/2” 5110 0.126 6

TDX10 HD7B 7 3-1/2 18-1/8 3-3/4 2 7/8 4 7/8 6-1/8 3” 7845 0.181 6

3-1/2” 7845 0.181 6

5-1/2” 7845 0.181 6

1-1/2” 6625 0.109 6

TDX14 HD9B 3 3-1/2 20-1/2 3-5/8 2-1/8 1 4 1 7 3” 11995 0.170 6

3-1/2” 13075 0.181 6

5-1/2” 13075 0.181 6

1) Allowable loads shown are for single shear connections and may be doubled for back-to-back installations. The designer must verify post and anchor bolt capacities.2 Allowable loads have been increased 60% for wind or seismic loads; no further increase shall be permitted.3) The designer must specify stud or post to resist published load values.4) The designer must specify anchor bolt type, length, and embedment.5) All models may be installed with greater than the required anchor end distance with no chart load reduction.6) Deflections are derived from static, monotonic load tests of devices connected to DF wood members and consider both the deflection of the holdown and cross grain crushing of the wood post.

7) The designer shall consider the effect of compression, bearing, tension, and combined bending due to device eccentricity when applicable.8) Holdowns raised off of the sill plate may have higher deflection values.9) Deflections are derived from static, monotonic load tests of devices connected to a steel jig. Additional deflection due to wood shrinkage and fastener slippage should be considered.

H

End Dist.CLW

D

TDX6

USP Predeflected Holdowns – PHDPHD – Reduces eccentricity in the studs/post decreased centerline dimension. No thru-bolts to countersink.

Dimensions (in.) Fastener Schedule Allowable Tension Loads (lbs.)1,4,7

Anchor WS3 Wood Deflection at USP Steel Bolts2 Screws6 DF/SP S-P-F Allowable Load Stock No. Ref. No. Gauge W H D CL8 Qty Dia. Qty 160% 160% i (in) at 160%3,5

PHD2A HDU2-SDS2.5 14 3 7-3/4 2-5/8 1-3/8 1 5/8 6 3215 2700 0.155 PHD4A HDU4-SDS2.5 14 3 9-3/4 2-5/8 1-3/8 1 5/8 10 5215 4380 0.137 PHD5A HDU5-SDS2.5 14 3 11-11/16 2-5/8 1-3/8 1 5/8 14 6525 5480 0.135 PHD8 HDU8-SDS2.5 12 3-1/4 16-1/2 3 1-3/8 1 7/8 24 8185 6875 0.062

1) Allowable loads have been increased 60% for wind and seismic loads; no further increase shall be permitted.2) The designer must specify anchor bolt type, length, and embedment.3) Deflections are derived from static, monotonic load tests of devices connected to DF-L wood members with specified fasteners.4) The designer shall consider the effect of compression, bearing, tension, and combined bending due to device eccentricity when applicable.

5) The PHD may be elevated off the sill.6) WS3 wood screws are 1/4” x 3” and are included with PHD models.7) Minimum post thickness is 3”. Consult a Spec-West sales representative for installations less than 3”.8) “CL” denotes the distance between the post and center of the anchor bolt.

Double lap back increases overall stiffness and fastener shear values.

Slotted seat design allows adjustment for mislocated anchor bolt.

W

1-5/8”

H

D

CL

PHD5


FOUNDATION STRAPS

57www.spec-west.com

USP Foundation Straps – STADSTAD – The coined dimples below the embedment line allow for increased concrete bonding. These holdowns retain high uplift capacity even when installed at corners of foundation stemwalls. Ideal for use with built up 2x end posts.

Dimensions (in.) Allowable Tension Loads (lbs.)9 Deflection Concrete Connection Strength10 at Allowable Seismic5,6,7 Load Based Min. Wood on Wood Stemwall Connection Connection USP Ref. Fastener Thickness Strap Strength Strength Stock No. No. Ga. Schedule1,2 W L Ie D CS (in.) Location Concrete10,11 Wind5,6,7 SDC A & B SDC C-F CD = 1.6 (in.)10

Corner3 Uncracked 2470 2470 2120 5105 0.123

STAD8 -- 12 (24) 16d Sinker 3 21-5/8 8 5 4-5/8 6 Cracked 2075 2075 1780 Middle4,5

Uncracked 4035 4035 3145 5105 0.123 Cracked 3460 3460 2965 Corner3

Uncracked 2470 2470 2120 5105 0.123 STAD8RJ -- 12 (24) 16d Sinker 3 35-1/8 8 5 18-1/8 6 Cracked 2075 2075 1780 Middle4,5


Uncracked 3265 3265 2800 5960 0.139 STAD10 STHD10 12 (28) 16d Sinker 3 21-5/8 10 5 1-5/8 6 Cracked 2645 2645 2265 Middle4,5


Uncracked 3265 3265 2800 5960 0.139 STAD10RJ STHD10RJ 12 (28) 16d Sinker 3 36 10 5 16-1/8 6 Cracked 2645 2645 2265 Middle4,5


Uncracked 5035 5035 4030 7220 0.138 STAD14 STHD14 12 (38) 16d Sinker 3 32-1/8 14 5 4-5/8 6 Cracked 5035 5035 4030 Middle4,5


Uncracked 5035 5035 4030 7220 0.138 STAD14RJ STHD14RJ 12 (38) 16d Sinker 3 39-5/8 14 5 12-1/8 6 Cracked 5035 5035 4030 Middle4,5

Uncracked 5580 5580 4345 7220 0.138 Cracked 5580 5580 4345

1) Predrilled holes are not required.2) Wood thickness shall be no less than 3-inches (2 - 2x members).3) Corner strap location implies that the distance from the corner of the wall to the edge of the strap is no less than 1/2”.4) Middle strap location implies that the minimum distance from the corner of the wall to the centerline of the strap is no less than 1.5 times the embedment depth.5) For edge distances between 1/2” and 1.5 x lE calculate loads using straight line interpolation.6) Minimum anchor spacing for full capacity is 2 x lE. For spacing less than that reduce capacity proportionally.7) The allowable loads are based on lumber with a specific gravity of 0.50 and a moisture content of 19% or less.8) Deformation based on wood connection strength.9) The lesser of the allowable load based on anchorage to concrete or wood connection strength must be selected.10) Minimum concrete strength f’c = 2500 psi.11) Minimum 1-#4 rebar shall be installed in the shear cone.12) NAILS: 16d sinkers are 0.148½ dia. x 3-1/4½ long. 10d common (0.148” dia. x 3” long) nails may be substituted with no load reduction.

L

W

CS

IE

D

STAD

DIVISION3.3

FOUNDATION STRAPS

58

USP Foundation Straps – HPAHD & PAHDPHAHD & PAHD – Designed to anchor wood framing to poured concrete foundations.

Fastener DF/SP Allowable Tension Loads (lbs.)2

Schedule1,12 Dimensions (in.) Deflection at Min. Wood Allowable Load Stemwall Concrete Connection Based on Wood USP Ref. Steel Thickness Edge Connection Strength Connection Stock No. No. Ga. Qty Type W H Ie D (in.) Distance3,4 Concrete9,10 Strength CD = 1.6 Strength (in.)8

Wind5,6,7 and SDC A & B

1/2” Uncracked 3300 3830 0.118 HPAHD22 -- 10 23 16d 2-1/16 24-3/4 9-1/2 4-1/8 6 Cracked 2310 1.5 x Ie

Uncracked 3460 3830 0.118 Cracked 2425 1/2” Uncracked 1225 2065 0.095 PAHD42 -- 12 15 16d 2-1/16 16-5/8 8 5-3/4 6 Cracked 855 1.5 x Ie

Uncracked 2610 2065 0.095 Cracked 1830 SDC C-F 1/2” Uncracked 2635 3830 0.118 HPAHD22 -- 10 23 16d 2-1/16 24-3/4 9-1/2 4-1/8 6 Cracked 1980 1.5 x Ie

Uncracked 2965 3830 0.118 Cracked 2075 1/2” Uncracked 1050 2065 0.095 PAHD42 -- 12 15 16d 2-1/16 16-5/8 8 5-3/4 6 Cracked 735 1.5 x Ie

Uncracked 2140 2065 0.095 Cracked 1565

1) Predrilled holes are not required.2) The lesser of the allowable load based on anchorage to concrete or wood connection strength must be selected.3) An edge distance of 1/2” implies that the distance from the corner of the wall to the edge of the strap is no less than 1/2”.4) An edge distance of 1.5 x Ie implies that the minimum distance from the corner of the wall to the centerline of the strap is no less than 1.5 times the embedment depth.5) For edge distances between 1/2” and 1.5 x le calculate loads using straight line interpolation.6) Minimum anchor spacing for full capacity is 2 x le. For spacing less than that reduce capacity proportionally.7) The allowable loads are based on lumber with a specific gravity of 0.50 and a moisture content of 19% or less.8) Deformation based on wood connection strength.9) Minimum concrete strength f’c = 2500 psi.10) Minimum 1-#4 rebar shall be installed in the shear cone.11) NAILS: 16d nails are 0.162” dia. x 3-1/2” long.

Embedmentline

H1

H2

D

W

HPAHD22

H1

H2

D

W

PAHD42

Embedmentline

Wind5,6,7 and SDC A & B

SDC C-F



PURLIN ANCHORS

59www.spec-west.com

USP Purlin Anchors – PA & PAIPA – For installation into poured concrete or concrete block walls and foundations.

PAI – For wood I-Joist applications. An expanded 3” on-center nail spacing reduces splitting along I-Joist flange.

Minimum Fastener Schedule5 DF/SP Allowable Embedment Min. Qty6 Tension Loads (lbs.)1,3

Nails4,7 Bolts Concrete Masonry USP Ref. L Nailer Nails Bolts2 Nails Bolts2

Stock No. No. (in.) Concrete Masonry Size Qty Nail Qty Dia. 160% 160% 160% 160% Max Capacity PA18 PA18 18-1/2 4 6 2x & 3x Ledger 12 16d 2 1/2 3035 2260 3035 2260 4x Ledger Max Capacity PA23 PA23 23-3/4 4 6 2x & 3x Ledger 15 16d 3 1/2 3700 3265 3035 3035 4x Ledger Max Capacity PA28 PA28 29 4 6 2x & 3x Ledger 15 16d 4 1/2 3700 3700 3035 3035 4x Ledger Max Capacity PA35 PA35 35 4 6 2x & 3x Ledger 15 16d 4 1/2 3700 3700 3035 3035 4x Ledger Max Capacity 2475 2475 PAI18 PAI18 18-1/2 4 6 2x & 3x Ledger 12 10d x 1-1/2 -- -- 2475 -- 1855 -- 4x Ledger 2270 1855 Max Capacity 3700 PAI23 PAI23 23-1/2 4 6 2x & 3x Ledger 18 10d x 1-1/2 -- -- 3510 -- 3035 -- 4x Ledger 3095 Max Capacity PAI28 PAI28 28-1/2 4 6 2x & 3x Ledger 24 10d x 1-1/2 -- -- 3700 -- 3035 -- 4x Ledger Max Capacity PAI35 PAI35 35-1/2 4 6 2x & 3x Ledger 26 10d x 1-1/2 -- -- 3700 -- 3035 -- 4x Ledger

1) Allowable Loads have been increased 60% for wind or seismic loads; no further increase shall be permitted.2) The allowable loads for bolts are based on parallel-to-grain loading with 3” minimum member thickness, except HPA which requires a 3-1/2” thick wood member.3) Allowable loads are based on the use of either nails or bolts; nail and bolt values cannot be combined.4) 16d sinkers or 10d common nails may be substituted for the specified 16d common nails at 0.85 of the table loads.5) For alternate nail schedule and load values consult USP.6) Minimum quantity of fasteners to be installed. Product may have additional fastener holes not needed to meet published allowable load of product.7) NAILS: 10d x 1-1/2” nails are 0.148” dia. x 1-1/2” long, 16d nails are 0.162” dia. x 3-1/2” long.

2-1/16”

L

1-1/2”

4-1/2”

2-1/16”

L

PA

PAI23

This catalog has no limits.If you don’t see what

you need — please call your local

SPEC-WEST800-723-SPEC

www.spec-west.com

DIVISION3.3

WET POST ANCHORS

60

USP Wet Post Anchors – WAS & WEWAS – A formed base providing a 1” stand-off with high bearing capacity.WE – A formed, one-piece design. Includes embossing for additional lateral strength.

Steel Fastener DF/SP Allowable Loads (lbs.)2,4

USP Gauge Dimensions (in.) Schedule5,6 Uncracked Concrete Cracked Concrete Post Stock Ref. Download Uplift1 F1 F2 Uplist1 F1 F2 Size No. No. Base Strap W1 W2 H1 H23 L Qty Type 100% 160% 160% 160% 160% 160% 160% WE44 PB44 12 12 3-1/2 -- 4-3/4 3-3/8 3-1/4 12 16d -- 1405 895 1010 1295 630 705

4x4 2 1/2 -- 1430 895 1010 1295 630 705 WAS44 PBS44A 16 14 3-9/16 3-1/2 6-3/4 3-1/2 2-1/4 14 16d 6775 3135 1405 1055 2420 995 740 2 1/2 6775 3075 1425 1055 2420 995 740 4x4 Rough WE44R PB44R 12 12 4 -- 5 3-5/8 3-3/8 12 16d -- 1405 895 1010 1295 630 705 WE46 PB46 12 12 5-1/2 -- 4-3/4 3-3/8 3-1/4 12 16d -- 1405 895 1010 1295 630 705

4x6 2 1/2 -- 1430 895 1010 1295 630 705 WAS46 PBS46 12 14 3-9/16 5-1/2 6-3/4 3-1/2 2-1/4 14 16d 12790 3135 1405 1055 2420 995 740 2 1/2 12790 3075 1425 1055 2420 995 740 4x6 Rough WE46R -- 12 12 6 -- 5 3-5/8 3-3/8 12 16d -- 1405 895 1010 1295 630 705 6x6

WE66 PB66 12 12 5-1/2 -- 5 3-5/8 5-3/8 12 16d -- 1405 895 1010 1295 630 705 WAS66 PBS66 12 12 5-1/2 5-1/2 6-3/4 5 2-1/4 14 16d 16005 3365 2040 1055 2800 1430 740 2 1/2 16005 4000 2040 1055 2800 1430 740 6x6 Rough WE66R PB66R 12 12 6 -- 5 3-5/8 5-3/8 12 16d -- 1405 895 1010 1295 630 705 SDC C-F WE44 PB44 12 12 3-1/2 -- 4-3/4 3-3/8 3-1/4 12 16d -- 1405 770 865 1110 540 605 4x4

2 1/2 -- 1425 770 865 1110 540 605 WAS44 PBS44A 16 14 3-9/16 3-1/2 6-3/4 3-1/2 2-1/4 14 16d 6265 2420 995 740 2075 855 635 2 1/2 6265 2420 995 740 2075 855 635 4x4 Rough WE44R PB44R 12 12 4 -- 5 3-5/8 3-3/8 12 16d -- 1405 770 865 1110 540 605 WE46 PB46 12 12 5-1/2 -- 4-3/4 3-3/8 3-1/4 12 16d -- 1405 770 865 1110 540 605 4x6

2 1/2 -- 1425 770 865 1110 540 605 WAS46 PBS46 12 14 3-9/16 5-1/2 6-3/4 3-1/2 2-1/4 14 16d 10960 2420 995 740 2075 855 635 2 1/2 10960 2420 995 740 2075 855 635 4x6 Rough WE46R -- 12 12 6 -- 5 3-5/8 3-3/8 12 16d -- 1405 770 865 1110 540 605 WE66 PB66 12 12 5-1/2 -- 5 3-5/8 5-3/8 12 16d -- 1405 770 865 1110 540 605 6x6 WAS66 PBS66 12 12 5-1/2 5-1/2 6-3/4 5 2-1/4 14 16d 13775 2800 1430 740 2400 1225 635 2 1/2 13775 2800 1430 740 2400 1225 635 6x6 Rough WE66R PB66R 12 12 6 -- 5 3-5/8 5-3/8 12 16d -- 1405 770 865 1110 540 605

1) Uplift loads have been increased 60% for wind or seismic loads; no further increase shall be permitted.2) Allowable loads are based on the use of either nails or bolts; nail and bolt values cannot be combined.3) H2 is mimimum embedment length of anchor into concrete.4) Minimum concrete strength f’c = 2,500 psi.5) All bolts shall meet or exceed the specifications of ASTM A 307.6) NAILS: 16d nails are 0.162” dia. x 3-1/2” long.

WAS

L

W1

W2

H1

H2

11-3/16”

WE

W1L

H1

H2

SDC C-F

SDC A & B


COLUMN BASES

61www.spec-west.com

USP Column Bases – CBSQCBSQ – These column bases install using USP’s WS2-HDG Wood Screws, reducing installation time and cost. Designed for high uplift in high wind or seismic applications. Includes a stand-off plate to protect the wood from ground contact moisture as required by building code.

Steel Fastener DF/SP Allowable Loads (lbs.)3

Gauge Dimensions (in.) Schedule2 Uncracked Concrete Cracked ConcreteColumn USP Wood Download Uplift Download Uplift Size Stock No. Ref. No. Strap Base W1 W2 L Embed4 Qty Screws 100% 160%1 100% 160%1

4 x 4 CBSQ44-TZ CBSQ44-SDS2 10 16 3-9/16 3-1/2 2-1/4 7-3/16 14 WS2-HDG 11950 5955 11950 4165 4 x 6 CBSQ46-TZ CBSQ46-SDS2 10 12 3-9/16 5-7/16 2-1/4 7-3/16 14 WS2-HDG 11955 5955 11955 4165 6 x 6 CBSQ66-TZ CBSQ66-SDS2 10 12 5-1/2 5-7/16 3 7-3/16 14 WS2-HDG 11955 6870 11955 5280

4 x 4 CBSQ44-TZ CBSQ44-SDS2 10 16 3-9/16 3-1/2 2-1/4 7-3/16 14 WS2-HDG 11950 5100 11950 3570 4 x 6 CBSQ46-TZ CBSQ46-SDS2 10 12 3-9/16 5-7/16 2-1/4 7-3/16 14 WS2-HDG 11955 5100 11955 3570 6 x 6 CBSQ66-TZ CBSQ66-SDS2 10 12 5-1/2 5-7/16 3 7-3/16 14 WS2-HDG 11955 6465 11955 4525

1) Uplift Loads have been increased 60% for wind and seismic loads, no further increase shall be permitted.2) WS2-HDG Wood Screws are 1/4” x 2” and are included with CBSQ Column Bases.3) Concrete compressive strength shall be 2,500 psi or greater at 28 days.4) The CBSQ shall be embedded into concrete up to specified depth. The minimum side cover is three inches.

1) Uplift loads have been increased 60% for wind or seismic loads; no further increase shall be permitted.2) WS2 Wood Screws are 1/4” dia. x 2” long and are included with KCBQ Column Bases.3) Concrete compressive strength shall be 2,500 psi or greater at 28 days.4) “Specify” denotes the required width that must be specified at the time of ordering.

L

H

7-3/16” W2

W1

CBSQ

KCBQ

L

H

8”

W1

W2

SDC C-F

SDC A & B

USP Column Bases – KCBQKCBQ – High capacity column base fastens to column with WS wood screws.

Steel Fastener DFD/SP Allowable Loads (lbs.)3

Gauge Diminsions (in.) Schedule2 Uncracked Concrete Cracked Concrete Column USP Uplift 160%1 Uplift 160%1

Size Stock No. Ref. No. Strap Base W1 W24 H L Qty Type SDC A & B SDC C-F SDC A&B SDC C-F 4 x 4 KCBQ44 CBQ44-SDS2 10 7 3-9/16 3-1/2 8-3/4 2-1/4 14 WS2 6870 6530 5330 4570 4 x 6 KCBQ46 CBQ46-SDS2 10 7 3-9/16 5-1/2 8-3/4 2-1/4 14 WS2 6870 6530 5330 4570 4 x 8 KCBQ48 -- 10 7 3-9/16 7-1/2 8-3/4 2-1/4 14 WS2 6870 6530 5330 4570 6 x 4 KCBQ64 -- 10 7 5-1/2 3-1/2 8-3/4 2-1/4 14 WS2 6870 6530 5330 4570 6 x 6 KCBQ66 CBQ66-SDS2 10 7 5-1/2 5-1/2 8-3/4 2-1/4 14 WS2 6870 6530 5330 4570 6 x 8 KCBQ68 -- 10 7 5-1/2 7-1/2 8-3/4 2-1/4 14 WS2 6870 6530 5330 4570 7-1/8 x 3-1/2 KCBQ71-4 -- 10 7 7-1/8 3-1/2 8-3/4 2-1/4 14 WS2 6870 6530 5330 4570 7-1/8 x 5-1/2 KCBQ71-6 -- 10 7 7-1/8 5-1/2 8-3/4 2-1/4 14 WS2 6870 6530 5330 4570 7-1/8 x 7-1/8 KCBQ71-7 -- 10 7 7-1/8 7-1/8 8-3/4 2-1/4 14 WS2 6870 6530 5330 4570 8 x 6 KCBQ86 -- 10 7 7-1/2 5-1/2 8-3/4 2-1/4 14 WS2 6870 6530 5330 4570 8 x 8 KCBQ88 -- 10 7 7-1/2 7-1/2 8-3/4 2-1/4 14 WS2 6870 6530 5330 4570 10 x 10 KCBQ1010 -- 10 7 9-1/2 9-1/2 8-3/4 2-1/4 14 WS2 6870 6530 5330 4570 10 x 12 KCBQ1012 -- 10 7 9-1/2 11-1/2 8-3/4 2-1/4 14 WS2 6870 6530 5330 4570 12 x 12 KCBQ1212 -- 10 7 11-1/2 11-1/2 8-3/4 2-1/4 14 WS2 6870 6530 5330 4570

5-1/8 glulam KCBQ5 -- 10 7 5-1/4 Specify 8-3/4 2 14 WS2 6870 6530 5330 4570



Glulam Sizes

DIVISIO

N3 .3

COLUMN BASES

62

1) Uplift Loads have been increased 60% for wind and seismic loads, no further increase shall be permitted.2) All bolts shall meet or exceed the specifications of ASTM A 307.3) Concrete compressive strength shall be 2,500 psi or greater at 28 days.

KCB

W1

W2

8”

H

L

3”

USP Column Bases – KCBKCB – Provides high structural capacity and rugged performance.

Steel Fastener DF/SP Allowable Loads (lbs.)3

Gauge Dimensions (in.) Schedule2 Uncracked Concrete Cracked Concrete Column USP Uplift 160%1 Uplift 160%1

Size Stock No. Ref. No. Strap Base W1 W24 H L Qty Type SDC A & B SDC C-F SDC A & B SDC C-F 4 x 4 KCB44 CB44 7 7 3-9/16 3-9/16 8-7/8 2 2 5/8 5525 5100 4165 3570 4 x 6 KCB46 CB46 7 7 3-9/16 5-1/2 8-7/8 2 2 5/8 5525 5100 4165 3570 4 x 8 KCB48 CB48 7 7 3-9/16 7-1/2 8-7/8 2 2 5/8 5525 5100 4165 3570 6 x 4 KCB64 CB64 7 7 5-1/2 3-1/2 8-7/8 3 2 5/8 6700 6465 5280 4525 6 x 6 KCB66 CB66 7 7 5-1/2 5-1/2 8-7/8 3 2 5/8 6700 6465 5280 4525 6 x 8 KCB68 CB68 7 7 5-1/2 7-1/2 8-7/8 3 2 5/8 6700 6465 5280 4525 6 x 10 KCB610 CB610 7 7 5-1/2 9-1/2 8-7/8 3 2 5/8 6700 6465 5280 4525 7 x 3-1/2 KCB74 CB7-1/8-4 3 7 7-1/8 3-1/2 9-3/4 3 2 3/4 6700 6465 5280 4525 7 x 5-1/2 KCB76 CB7-1/8-6 3 7 7-1/8 5-1/2 9-3/4 3 2 3/4 6700 6465 5280 4525 7 x 7 KCB77 CB7-1/8-7 3 7 7-1/8 7-1/8 9-3/4 3 2 3/4 6700 6465 5280 4525 8 x 6 KCB86 CB86 3 7 7-1/2 5-1/2 9-3/4 3 2 3/4 6700 6465 5280 4525 8 x 8 KCB88 CB88 3 7 7-1/2 7-1/2 9-3/4 3 2 3/4 6700 6465 5280 4525 10 x 10 KCB1010 CB1010 3 7 9-1/2 9-1/2 9-3/4 3 2 3/4 6700 6465 5280 4525 10 x 12 KCB1012 CB1012 3 7 9-1/2 11-1/2 9-3/4 3 2 3/4 6700 6465 5280 4525 12 x 12 KCB1212 CB1212 3 7 11-1/2 11-1/2 9-3/4 3 2 3/4 6700 6465 5280 4525

5-1/8 CB5-4.5, glulam KCB5 CB5-6 3 7 5-1/4 Specify 9-3/4 3 2 3/4 6700 6465 5280 4525

6-3/4 CB7-6, CB7-7.5, glulam KCB7 CB7-9, CB7-10.5 3 7 6-7/8 Specify 9-3/4 3 2 3/4 6700 6465 5280 4525

8-3/4 CB-6, CB9-7.5, glulam KCB9 CB9-9, CB9-10.5 3 7 8-7/8 Specify 9-3/4 3 2 3/4 6700 6465 5280 4525

Glulam Sizes


Conversion FactorsVolumeCubic inch = 16.39 ccCubic foot = 1728 cu. in. = 7.481 gal.Cubic yard = 27 cu. ft. = 0.7646 cbmUS gallon = 231 cu. in. = 3.785 literUS gallon = 128 fluid ounceUS fluid ounce = 29.57 ccImperial gallon = 1.20 US gallonImperial fluid ounce = .961 US fluid ounce

Length1 inch = .0833 ft. = 2.54 cm1 foot = .333 yd. = .3048 m1 mile = 5280 ft. = 1.609 km1 meter = 39.37 in. = 3.281 ft.

Specific Weight1 pound water = 27.6 cu. in. = .1198 gal.1 cu. ft. water = 62.43 pounds1 gallon water = 8.345 pounds

AreaPi = 3.14159Circular inch = .7854 sq. in.Square inch = 6.452 sq. cmSquare feet = 144 sq. in = .111 sq. yd.Square yard = 9 sq. ft. = .8361 sq. in.Square mile = 640 acres = 2.590 sq. km

Temperature°C = °F - 32 °F = 1.8 x °C + 32 1.8

GROUT ANDREPAIR MORTAR

63www.spec-west.com

CG-86™ – Construction-Grade GroutCG-86 is versatile and designed for structural grouting of machine and column baseplate, anchoring doweling, precast wall panels, and bridge seats and bearing pads. CG-86 is suitable for the transportation, industrial, commercial, and municipal markets. FEATURES/BENEFITS• Furnished premixed and ready to use … just add

water.• Excellent freeze-thaw characteristics … long-term

stability.• Conforms to ASTM C 827 and ASTM C 1090 positive expansion.• May be mixed to dry pack, plastic, flowable, and fluid consistencies for high versatility.• Provides a high strength, non-shrink grout for a broad range of general

construction projects.• Offers the strength and characteristics required for cost-effective, gen-

eral purpose grouting.• Cost reductions are realized when extended with pea gravel for deep

grouting.• Requires no separate bonding agent … only pre-saturation of concrete

with water prior to application.• No site batching required for consistent results.• No added chlorides or gypsum.PACKAGING 50 lb. Poly-Lined Bags

*All technical data is typical information, but may vary due to test methods, conditions, procedures, batching variations and raw material variances.

588-10K – Non-Shrink, Non-Ferrous, Mineral-Aggregate-Based Precision Grout588-10K is designed for precision grouting of machinery and equipment base plates, windmill turbines, generators, rolling mills, compressors, or similar types of machinery. It is also designed for grouting soleplates, bridge seats, precast columns and beams, steel column pads, precast beams, and segmental bridge construction. 588-10K can also be used for anchoring of guardrails, signposts, bridge seats, anchor bolts, guide wires and dowels. FEATURES/BENEFITS• May be mixed to plastic, flowable, and fluid consistencies for easy

application. • May be extended up to 50% by weight.• Very high compressive and flexural strengths.• High modulus to ensure proper load transfer.• Non-shrink ensures proper load transfer.• Quickly and easily placed by pouring or pumping.• Resists heat up to 600°• Resists many chemicals, including oils, petroleum products, solvents,

and mild caustic alkalis. • No added chloride or gypsum.PACKAGING 50 lb. Poly-Lined Bags

MEADOW-PLUG™ – One Component, Super Fast Setting, Hydraulic Repair MortarOnce mixed with water to a putty-like consistency, MEADOW-PLUG may be hand formed to quickly stop active fluid leaks in basements, tunnels, swimming pools, sewers, non-potable water tanks, voids around pipes, and wall tie holes. It seals construction joints between floors and walls. FEATURES/BENEFITS• Fast initial set – Stops liquid flow immediately.• Expands as it sets – Forms a permanent water stop.• Mixes with water only – Easy to use.• Horizontal, vertical, interior, exterior – Highly versatile.

TECHNICAL DATA*Using water amount for desired consistency as stated below per bag at 75°F (23°C) Consistency per ASTM C 827-95a Plastic Flowable Fluid Mix Ratio per 50 lb. bag 6.5 Pints 7.25 Pints 8.25 Pints Flow per ASTM C 230-90 5 Drops/Flow Table 110% 130% Flow per ASTM C 939-94a Flow Cone 26 Secs. Set Time per ASTM C 192-92 Initial Set 1 hr. 3 hrs. 5 hrs. Final Set 3 hrs. 5 hrs. 7 hrs. Expansion 24 hours 0.13% 0.10% 0.02% 3 days 0.16% 0.13% 0.04% 7 days 0.17% 0.13% 0.05% 28 days 0.17% 0.14% 0.06% Shrinkage % NONE NONE NONE Compressive Strength 1 day 5,500 psi 4,500 psi 3,500 psi 3 days 6,500 psi 5,500 psi 4,500 psi 7 days 7,500 psi 6.500 psi 5,500 psi 28 days 11,000 psi 9,200 psi 8,200 psi

TECHNICAL DATA* (Tests conducted at 75°F (23.9°C) unless noted) Consistency Plastic Flowable Fluid per ASTM C 827-95a Mix Ratio per 50 lbs. 6.25 pints 6.75 pints 8.5 pints Flow per ASTM C 230-90 100-120% 120-140% n/a Flow per ASTM C 939 40 Sec. Set Time per C191-92, Initial 4-6 hrs. 5-7 hrs. 6.8 hours Bond Strength at 28 Days ASTM C 882 Modified 2300 psi 2500 psi Freeze-Thaw Resist. ASTM C 666 100% Relative 100% Relative Procedure A, 300 Cycles Dynamic Mod. Dynamic Mod. Compressive Strength per ASTM C109-13 Wet Cure 1 day 3,500 psi 3,000 psi 2,500 psi 3 days 4,500 psi 4,000 psi 3,500 psi 7 days 6,000 psi 5,500 psi 5,000 psi 28 days 8,000 psi 7,500 psi 7,000 psi

• Above grade, below grade, underwater – Multi-purpose.• Non-metallic, non-corrosive – Will not stain.• May be top-coated within one hour – Saves time.• Good sulfate resistance – For wastewater or sewer applications.PACKAGING 50 lb. Pails, 8 lb. Tubs

TECHNICAL DATA* Compressive Strength per ASTM C 109 at: 15 min. 850 psi 1 hour 1,225 psi 1 day 2,650 psi 28 days 6,000 psi Set time per ASTM C 191 Initial: 2 minutes Final: 3 minutes*All technical data is typical information but may vary due to testing methods, conditions and operator.

DIVISIO

N3 .3

VAPOR BARRIER

PERMINATOR® – Vapor Barrier & Vapor Retarder

PERMINATOR underslab vapor barrier is primarily designed for underslab construction, where the soil has been tamped and leveled or compacted fill has been applied. The 200’ (61m) long sheets are unrolled as is or cut to size and installed using the overlapping method. Overlaps are 6” (152.4mm) wide and these seams are sealed using 4” (101.6mm) wide PERMINATOR TAPE.PERMINATOR can also be used as a protection course for waterproofing membranes. The desired sheet lengths are cut to size and retained at the top of the waterproofing membranes by PERMINATOR TAPE or TERMINATION BAR from W R. MEADOWS.FEATURES/BENEFITS• Available in 10 mil and 15 mil thicknesses, in 200’ (61m) long rolls.• Helps reduce the penetration of moisture and water vapor through the

slab into the structure.• Helps reduce fungus, mildew and mold.• Helps reduce radon gas from entering a structure.• Resistant to methane gas.• Tough enough to withstand normal construction jobsite conditions and

traffic … will not crack, puncture, snag, split or tear easily.• Installs quickly and easily over tamped grade … no gravel, fill or sand

needed.• 12’ (15 mil) and 15’ (10 mil) wide rolls require fewer seams.• PERMINATOR prevents uncontrolled moisture from entering the slab

allowing the slab to maintain the maximum slab moisture emission rate and relative humidity level as allowed by flooring manufacturer’s specifications.

• 10 or 15 mil thickness clearly marked on membrane for easy visual identification on jobsite.

• VOC content is 0 g/L. • Made in America.SPECIFICATIONS• Meets or exceeds all requirements of ASTM E 1745-11 Class A, B &

C.• ACI 302.2R: Guide for Concrete Slabs that Receive Moisture Sensitive

Flooring Materials makes a suggestion to use materials having 0.01 perms when flooring materials require protection lower than that determined by ASTM E1745. PERMINATOR 15 mil meets this requirement.

PACKAGING• 10 mil: 15’ wide (4.57m), 200’ long (60.96m) • 15 mil: 12’ wide (3.66m), 200’ long (60.96m)

64

PERMINATOR TAPE® – Vapor Barrier Tape

PERMINATOR TAPE is for use in sealing vapor barrier seams and attachment to footings, protrusions, etc. FEATURES/BENEFITS• Backing stabilized to resist the effects of UV exposure.• Product is very conformable.• Maintains a watertight seal in all weather conditions.PACKAGINGPERMINATOR TAPE is offered in 4” (10cm) widths and roll lengths of 180’ (55m), 12 rolls/carton.COVERAGEOne box of tape will adhere approximately 10 rolls of PERMINATOR.

PMPC – PREMOULDED MEMBRANE® VAPOR SEAL WITH PLASMATIC® CORE

PMPC, when properly applied, is designed to stop moisture migration (liquid or vapor) in footings, concrete floor slabs, and structural slabs, which greatly reduces fungus, mildew, and mold. It is especially useful under slabs overlaid with wood, tile, epoxy, and urethane coatings, carpeting, and resilient or seamless flooring systems, since it helps prevent warping and buckling caused by moisture migration. PMPC also greatly reduces radon gas from entering the structure. FEATURES/BENEFITS• Offers a virtually impermeable vaporproofing system with a perm rating

of less than 0.002 perms, the lowest in the industry.• As the only true vapor barrier for horizontal applications, it is both

waterproof and vaporproof.• Provides excellent tensile strength and puncture resistance.• Helps prevent warping, buckling, or delamination of subsequent

flooring systems.• Conforms to ASTM E 1993-98 specification.• Greatly reduces radon gas from entering the structure.• Helps meet and maintain the maximum slab moisture transfer rate

of 3 lb./1000 sq. ft./24 hours, as allowed by the flooring industry’s specifications.

PACKAGING 4’ (1.22m) x 8’ (2.44m) sheets


POLYETHYLENE FILM

65www.spec-west.com

MULTI-PURPOSE ECONOMY ROLLS

TRM “Weather-All”Multi-Purpose

POLYETHYLENE FILM

MEETING THE HIGHESTINDUSTRY, STATE AND FEDERAL

QUALITY STANDARDS

STK # ROLL SIZE LBS/ROLL COLOR SKID#

.0007 .07 MIL ROLLS

HD712 12’ x 400’ 16.00 CLEAR 72

.002 TWO MIL ROLLS

20504 4’2” x 200’ 8.00 CLEAR 30/4

.004 FOUR MIL ROLLS

420 20’ x 100’ 38.20 BLACK/CLEAR 35

.006 SIX MIL ROLLS

620 20’ x 100’ 57.40 BLACK/CLEAR 20

.010 TEN MIL ROLLS

1020 20’ x 100’ 95.50 BLACK/CLEAR 9

Made in

California

DIVISIO

N3 .3

DUPLEX SCREW

1 lb., 5 lb. consumer packs – Ideal for smaller projects.25 lb., 50 lb. bulk boxes – Perfect for the construction site or larger jobs.

Duplex Screws are double headed screwsthat are perfect for Concrete Forming.

SCREED ACCESSORIES

Screed Pad Post• 3/4” Diameter.• Tapped 1/2” N.C. thread.• Screws on die cast screed pads.• Good for plywood and steel decks.

Die Cast Screed Pads

2 x 4 Cast Iron Screed Hook

Wire Screed Hook

ANCHOR BOLTSAND FASTENERS

ANCHOR BOLTS

NAILS

66

u For attaching bottom plate or sill plate to newly poured concrete foundation.u Hot dipped galvanized anchor bolts and plates are recommended when working with treated lumber.

Anchor Bolt with Nut & Round* SAE Washer Pieces/ Boxes/ Size Box Pallet SKU Bright ASTM A153 Class C 3/8” x 6” 50 100 386AB50 3/8” x 8” 50 100 388AB50 1/2” x 6” 50 50 126AB50 1/2” x 8” 50 50 128AB50 1/2” x 10” 50 50 1210AB50 1/2” x 12” 50 50 1212AB50 1/2” x 14” 50 50 1214AB50 1/2” x 16” 50 50 1216AB50 1/2” x 18” 50 50 1218AB50 5/8” x 8” 25 50 588AB25 5/8” x 10” 25 50 5810AB25 5/8” x 12” 25 50 5812AB25 5/8” x 14” 25 50 5814AB25 5/8” x 16” 25 50 5816AB25 3/4” x 10” 20 25 3410AB20 3/4” x 12” 20 25 3412AB20 3/4” x 14” 20 25 3414AB20 3/4” x 15” 20 25 3415AB20 3/4” x 18” 20 25 3418AB20Hot Dipped Galvanized ASTM A153 Class C 1/2” x 6” 50 50 126GAB50 1/2” x 8” 50 50 128GAB50 1/2” x 10” 50 50 1210GAB50 1/2” x 12” 50 50 1212GAB50 1/2” x 14” 50 50 1214GAB50 1/2” x 16” 50 50 1216GAB50 1/2” x 18” 50 50 1218GAB50 5/8” x 8” 25 50 588HGAB25 5/8” x 10” 25 50 5810HGAB25 5/8” x 12” 25 50 5812HGAB25 5/8” x 14” 25 50 5814HGAB25 5/8” x 16” 25 50 5816HGAB25

*Available with Square and Square Slotted Washers.

Head Approx. Size Gauge Size Count/lb. SKU 3/8” 9 5/16” 420 38TFMAS 1/2” 9 5/16” 355 12TFMAS 5/8” 9 5/16” 279 58TFMAS 3/4” 9 5/16” 248 34TFMAS 1” 9 5/16” 186 1TFMAS 1-1/4” 9 5/16” 152 114TFMAS 1-1/2” 9 5/16” 128 112TFMAS 1-3/4” 9 5/16” 112 134TFMAS 2” 9 5/16” 98 2TFMAS 2-1/4” 9 5/16” 84 214TFMAS 2-1/2” 9 5/16” 78 212TFMAS 2-3/4” 9 5/16” 56 234TFMAS 3” 9 5/16” 78 3TFMAS 3-1/4” 9 5/16” 60 314TFMAS 3-1/2” 8 11/32” 48 312TFMAS 3-3/4” 8 11/32” 45 334TFMAS 4” 7 3/8” 35 4TFMAS

Head Approx. Size Penny Gauge Size Count/lb. SKU 1-3/4” 6D 11-1/2 3/16” / 17/64” 156 6DUP 2-1/4” 8D 10-1/4 15/64” / 9/32” 90 8DUP 2-3/4” 10D 9 1/4” / 5/16” 59 10DUP 2-7/8” 12D 9 1/4” / 5/16” 57 12DUP 3” 16D 8 9/32” / 11/32” 45 16DUP 3-1/2” 20D 6 5/16” /3/8” 28 20DUP

Duplex Nails – Bright Double-head Shank

u For temporary construction where nail removal is required, such as concrete forming and scaffoldings.

u Smooth, uncoated shank and double head ease removal (second head remains exposed). Made to conform to ASTM F1667.

Head Shank Approx. SKU Size Penny Gauge Size Style Count/lb. Bright Galv. 1-1/4” 3d 14 13/64” Smooth 543 3C 3HGC 1-1/2” 4d 12-1/2 1/4” Smooth 294 4C 4HGC 1-3/4” 5d 12-1/2 1/4” Smooth 254 5C 5HGC 2” 6d 11-1/2 17/64” Smooth 167 6C 6HGC 2-1/4” 7d 11-1/2 17/64” Smooth 150 7C 7HGC 2-1/2” 8d 10-1/2 9/32” Smooth 101 8C 8HGC 3” 10d 9 5/16” Smooth 66 10C 10HGC 3-1/4” 12d 9 5/16” Smooth 61 12C 12HGC 3/1/2” 16d 8 11/32” Smooth 47 16C 16HGC 4” 20d 6 13/32” Smooth 29 20C 20HGC 4-1/2” 30d 5 7/16” Smooth 22 30C 30HGC 5” 40d 4 15/32” Smooth 17 40C 40HGC 5-1/2” 50d 3 1/2” Smooth 13 50C 50HGC 6” 60d 2 17/32” Smooth 10 60C 60HGC 1-1/4” 3d 14 13/64” Ring 543 3HGATC 1-1/2” 4d 12-1/2 1/4” Ring 294 4HGATC 2” 6d 11-1/2 17/64” Ring 167 6ATC 6HGATC 2-1/2” 8d 10-1/2 9/32” Ring 101 8ATC 8HGATC 3” 10d 9 5/16” Ring 66 10ATC 10HGATC 3-1/4” 12d 9 5/16” Ring 61 12ATC 10HGATC 3-1/2” 16d 8 11/32” Ring 47 16ATC 16HGATC 4” 20d 6 13/32” Ring 29 20ATC 29HGATC 4-1/2” 30d 5 7/16” Ring 22 30ATC 30HGATC 5” 40d 4 15/32” Ring 17 40ATC 40HGATC 6” 60d 2 17/32” Ring 10 60ATC 60HGATC 2” 6d 11-1/2 17/64” Spiral 167 6STC 2-1/4” 7d 11-1/2 17/64” Spiral 150 7STC 2-1/2” 8d 10-1/2 9/32” Spiral 101 8STC 3-1/2” 16d 8 11/32” Spiral 47 16STC 2” 6d 11-1/2 17/64” Ardox 167 6ADXC 2-1/2” 8d 10-1/2 9/32” Ardox 101 8ADXC 3-1/2” 16d 8 11/32” Ardox 47 16ADXC 4” 20d 6 13/32” Ardox 29 20ADXC

Common Nails – Bright & Hot Dipped Galvanized

u For construction, carpentry and framing. Galvanized coating and larger shank provide greater strength. Conforms to ASTM F1667.

u For attaching furring strips and floor plates to uncured concrete.

u Made to conform to ASTM F1667.

Masonry Nails (Fluted)

Bright Galvanized


SPRAYERS

67www.spec-west.com

Acetone Sprayer with Dripless Shut-off – 3 Gal .Model #21127XP• Dripless trigger grip shut-off (at the nozzle) for

no-drip applications with XTREME™ Viton® seals.

• EPDM seals and gaskets to handle high concentration of acetone (stains).• Large 4-inch opening for easy filling and cleaning.• Pressure release valve.• Lock-Off feature prevents accidental spray.• Polyethylene tank – compatible with acetone stains.

Industrial Xtreme™ Concrete Sprayer w/ Dripless Shut-off – 3 Gal . Model #22149• Dripless trigger grip shut-off (at the nozzle) for a

no-drip application.• Xtreme™ Viton® seals resistant to the most

extreme chemicals and high concentrations of Acetone®, Naphtha®, Xylene®

and Toluene®.• Pressure release valve.• Translucent poly tank – compatible with most con-

crete solvents, cure & seals and form oils.• Large, 4-inch opening for easy filling and cleaning.

Upside Down Multi-UseTrigger Sprayer – 32 Oz . Model #1105• Ideal for use in your home or garden.• Sprays in any position, including upside down.• Made of high quality poly material.

Spec-West Sprayer – 2 Gal . Model #27522• Viton® seals and gaskets.• Funnel top for easy filling.• Two Gallon capacity.• Includes three detachable tips that delivers a fan shaped stream.• Durable poly trigger action grip allows easy spray and shut-off.• Poly extension wand provides increased strength and resistance to chemical corrosion.

Acetone Sprayer – 48 Oz . Model #10027• EPDM seals and gaskets to handle high concentrations of acetone (stains).• Adjustable cone nozzle.• 48 oz. cleanable bottle.• SureSpray™ anti-clog filter.• Polyethylene tank – compatible with ace-

tone stain.• Lightweight and durable.

Industrial Viton® Concrete Open Head Sprayer – 3 .5 Gal .Model #1949(Chapin’s most popular industrial sprayer)• Viton® seals and gaskets.• TriPoxy steel tank with large, 4” tri-lock opening for easy filling and cleaning.• Brass spray handle, wand and nozzle.• Brass pump.• Brass Shut-Off for durability and easy cleaning.• Lock-On feature locks sprayer in spray mode to reduce fatigue.• Use for concrete additives.

Xtreme™ Industrial Viton® Concrete Sprayer – 3 .5 Gal .Model #19049• Xtreme™ Viton® seals and gaskets.• TriPoxy steel tank with large, 4” tri-lock opening for easy filling and cleaning. The 3-prong patented design creates a strong, even seal for safe pressurizing.• Brass spray handle, wand and nozzle.• Brass pump.• Lock-On feature locks sprayer in spray mode to reduce fatigue.• Use for concrete additives. Great for cleaning/degreasing and for use in decorative concrete work.

DIVISIO

N3 .3

CONCRETE TESTING

DESLAURIERS BIO-CYLINDERThe Environmentally Responsible Test Cylinder Moldst Bio-degradable, recyclable, unlimited shelf life.t BIO-CYLINDER test cylinder molds meet ASTM specifications C39, C192 and C470.t BIO-CYLINDER mold is non-absorptive.t Molded single unit for consistent dimensional uniformity.tTop rim eliminates deformation.t Smooth molded plastic allows quick, easy stripping.tWeather resistant – eliminates jobsite storage problems.t Bio-degrades when placed into an active landfill.t Custom silk screen labeling available.t Available in 6x12, 4x8, 3x6 and 2x4.t Custom colors available.

68

PLASTIC SLUMP CONEt ASTM C143 approved.t Easily cleaned – can be cleaned in acid bath.t Use with or without base plate.tLightweight, reusable and inexpensive.tWill not rust and does not dent.

SLUMP CONE SETIncludest Spun metal slump cone.tGraduated tamping rod.t Cast aluminum slump cone base.t Cast aluminum 38 oz. scoop.

STEEL SLUMP CONEt Accurately determine the slump of concrete both in the laboratory and in the field.t Made of seamless spun steel for easy cleaning.t Fitted with handles and foot lugs, plated to resist rust.t Conical shape, 8” diameter base by 4” top by 12” height.t Meets ASTM C143.

SLUMP CONE FUNNELt Made of seamless spun steel with rolled top for easy cleaning.t Conical shape, 4” diameter base by 8” top.

LIDSThe cover interlocks with the test cylinders to provide consistent and uniform curing. It helps reduce mold detection and provides consistency in mold shape – easy stripping from the mold. Available for all sizes of test cylinder molds.

CAT# PSC

CAT# SC

CAT# SCSET

CAT# funnel


69www.spec-west.com

DIVISIO

N3 .4Concrete Restoration

& Surface Preparation


™

Self-Leveling Toppings& Underlayments

Dressing / Finishing

Patching / Repair

Concrete & Masonry Mixes

Epoxy Adhesives

Anchoring Adhesives

Mechanical Anchors

Diamond Blades& Cup Wheels

Dust Collection

Abrasives

Cleaners & Strippers

Asphalt Repair

Resurfacing

SUBSTRATE RESTORATION

70

ARDEX FEATHER FINISH mixes to a creamy, smooth finish under-layment that eliminates flooring installation problems associated with disbonding, crumbling, mold, mildew and staining. Install over: concrete, masonry, wood, terrazzo, ceramic and quarry tile – as well as properly prepared residues of cutback and other non-water-soluble adhesives on concrete – all without the need for priming or the use of a latex additive.Features:• Blend of hydraulic and other

cements• Self-drying matrix• Mixes with water only• Trowelable• Mold and mildew resistant• Interior use.Packaging: 10 lb. (4.5kg)Coverage: Up to 300 sq. ft. per bag (27.9m2)Thickness: True Featheredge; 1/2” (13mm) over large areas; any depth in small areas.

ARDEX V 1200™ (Self-Leveling Underlayment)ARDEX V 1200™ is the leveler for big jobs on tight schedules.Install over: interior concrete, ter-razzo, ceramic and quarry tile, epoxy coating systems and non-water soluble adhesive resi-dues on concrete.Features:• Interior use• Use on, above or below grade• Mixes with water.Packaging: 50 lb. (22.7kg)Coverage: 25 sq. ft. per bag at 1/4” (2.3m2 at 6mm)Thickness: Levels at 1/4” (6mm); installs from

1/8” to 1-1/4” (3mm to 3cm); can be tapered.

ARDEX K 15® (Self-Leveling Underlayment)ARDEX K 15® is the original and the most specified self-leveler in North America.Install over: interior concrete, terrazzo, ceramic and quarry tile, epoxy coating systems, wood, metal and non-water soluble adhesive residue on concrete; can be installed over concrete treated with certain curing compounds.Features:• Interior use; on, above or below grade• Mixes with water.Packaging: 55 lb. (25kg)Coverage: 30 sq. ft. per bag at 1/4” (2.8m2 at

6mm)Thickness: Levels at 1/4” (6mm); installs from

1/8” to 1-1/2” (3mm to 4cm) neat; up to 5” (13cm) with aggregate; can be tapered.

ARDEX K 500™ (Concrete Topping)ARDEX K 500™ is a self-leveling, no troweling topping for fast track resurfacing, smoothing or leveling of indoor concrete.Install over: concrete and certain non-porous surfaces.Features:• Pourable and pumpable• Interior use.Packaging: 55 lb. (25kg)Coverage: 27.5 sq. ft. per bag at 1/4” (2.6m2

at 6mm)Thickness: Neat – 1/4” to 1-1/2” (6mm to

3.8cm); Aggregate – Up to 5” (13cm); install at a minimum thickness of 3/8” (9.5mm) for a polished topping.

ARDEX SD-P® (Self-Drying Underlayment)ARDEX SD-P® is a patch that sets quickly so that a smooth, steel-troweled surface can be readily obtained. The finished sur-face hardens rapidly, permitting the installation of most common floor coverings quickly. It was developed to reduce curing time on pressed-for-time jobs.Install over: concrete floors, ramps, and stairways, as well as non-porous substrates such as terrazzo, ceramic and quarry tile.Features:• Most floor coverings can be installed immediately• Portland cement chemistry• Self-drying matrix• Mixes with water only• Trowelable• Interior use.Packaging: 20 and 40 lb. (9 and 18kg)Coverage: 50 sq. ft. per 40 lb. bag at 1/8” (4.65m2 at 3mm)Thickness: Featheredge – up to 1” (2.5cm) over large areas; Aggregate – up to 3” (7.5cm) in areas up to 4 sq. ft. (0.37m2).

ARDEX FEATHER FINISH® (Underlayment)


CONCRETE REPAIR

ARDEX CD™ (Concrete Dressing)

71www.spec-west.com

ARDEX CD™ is a concrete resurfacing compound modified with high-performance polymers for exceptional bond strength. Formulated from a blend of Portland cement and other hydraulic cements, it can be used over existing concrete to produce a new wear layer as well as to fill in small surface defects. ARDEX CD can be applied by trowel, squeegee or hopper gun or can be broom textured before it sets for a reduced-slip surface.Features:• Mixes with water only• Easy to apply• Installs 1/16” up to 1/8” (1.5 to 3mm)• Can be mixed to apply at a thickness

of up to 1/2” (12mm) for minor patching• Use for interior and exterior floors

and walls• Suitable for foot and rubber tire traffic• Available in gray or white, coarse or

fine finish.Packaging: 40 lb. (18kg)Coverage: Up to 120 sq. ft. per bag at 1/16” (11.1 sq. m at 1.6mm)

ARDEX CP™ (Concrete Patch)ARDEX CP™ is a trow-el-grade, cementitious topping for filling and repairing concrete above, on or below grade. Install over: Interior and exterior concrete floors, walls, steps and ramps.Features:• Freeze-thaw resistant• Suitable for foot and rubber tire traffic• Horizontal and vertical application.Packaging: 40 lb. bag (18kg)Coverage: 22.5 sq. ft. per bag at 1/4” (21.1m2 at 6mm)Thickness: Neat – 1/4” to 1/2” (6 to 12mm); Aggregate – up to 2” (5cm).

ARDEX TWP™ (Tilt Wall Patch)ARDEX TWP™ is a finishing compound to fill and smooth vertical concrete surfaces prior to sealing or painting. Tougher and more durable than tradition-al gypsum and latex patches. Use for tilt-up walls, pre-cast or poured in place concrete panels, and other concrete or masonrysurfaces; fill surface spalls, goug-es, cracks, dents, chips, bug holes or honeycombs.Features:• Portland cement based / • Trowelable• Mixes with water / • Interior and exterior.Packaging: 10 lb. (4.5kg)Coverage: 100 to 150 sq. ft. per bag at a skim-coat (9m2 to 14m2)

ARDEX CD FINE™ (Concrete Dressing)ARDEX CD FINE™ is modified with high-performance polymers and hydraulic cements for exceptional bond strength. Apply by trowel, squeegee or hopper gun; broom texture before it sets for a reduced-slip surface.Features:• Portland cement-based• Interior or exterior• For floors and walls• Special mix ratio for minor patching• Available in gray and white• Accepts color for decorative finishes.Packaging: 10 lb. (9kg)Coverage: up to 100 sq. ft. per bag at 1/32” (9.3m2 at 0.8mm)

ARDEX OVP™ (Overhead & Vertical Patch)ARDEX OVP™ is a trowelable finishing compound for tilt-up walls, pre-cast or poured in place concrete panels, and other concrete or masonry surfaces. Tougher and more durable than gypsum and latex patches.Features:• Water only / • Portland cement-based• Interior and exterior / • Self-Drying• Sandable / • Does not shrink.Packaging: 20 lb. bag (9kg)Coverage over smooth surface: 133 sq. ft. (12.35m2) at 1/16”; 66.6 sq. ft. (6.18m2) at 1/8”;

33.3 sq. ft. (3.09m2) at 1/4”; 300 sq. ft. (27.87m2) at a skim coat

DIVISIO

N3 .4

PAVECRETE® FOR RUBBING, SMOOTHING, RESTORATION, RESURFACING, REPAIRING

PAVECRETE is a Portland cement based product with graded silica aggregatesand special chemical additives for bonding, hardening and moisture retention. It is formulated for smoothing, rubbing and thin coat patchingapplications. PAVECRETE has a smooth, rich texture making it simple andeasy to apply. After curing, it is not water sensitive, it has the setting and curing properties of regular concrete. Use of PAVECRETE can help your project earn LEED Credits.

PRODUCT APPLICATIONS• Brighten and restore old concrete structures.• Rub concrete columns and structures.• Repair voids, honeycombs, holes, chipped areas in poured or precast concrete.• Fill cracks and holes in concrete, masonry, plaster, stucco, sheetrock and wood.• Use PAVECRETE to repair concrete, facings, walls, ceilings, beams and bridge abutments.• Use Pure PAVECRETE for smooth applications up to 1/8” thickness.• Use Sand Mix PAVECRETE for coarser texture finish and applications up to 1/4”.• Use White PAVECRETE for a white finish or with integral color or stain for brighter colors.

PRODUCT FEATURES• Featheredge to paper thin.• Color controlled to blend with concrete.• Add only water. Cures like regular concrete. Low shrinkage. Water resistant.• Not a gypsum product.• Extra rich for easy installation. Holds moisture while spreading or rubbing.• LEED credits applicable.

PRODUCT SPECIFICATIONS MATERIAL: Portland cement based product with special chemical additives CONSISTENCY: Mix to stiff trowelable consistency like soft putty WORKING TIME: Approximately 15 minutes COMPRESSIVE STRENGTH (ASTM C109, Moist cured) 7 Days: 28 Days: 3285 PSI 3915 PSI Tests performed on Sand Mix PAVECRETE. The strength of Pure PAVECRETE is

approximately 10% less.

P-100 PRIMER AND SURFACE BONDING, BONDING ADMIXTURE, VOC COMPLIANT

P-100 is a ready to use, film forming, one-time re-emulsifiable liquid bonding agent and polymer modifier for concrete. (VOC Compliant) This material, based on a new technology, gives outstanding surface and integral bonding without moisture sensitivity. It may be used inside or outside. P-100 was developed for use as a primer for our SUPER FLOWCRETE self-leveling material and is also used to prime surfaces before applications of PATCHCRETE, POWER-CRETE and CAST-PATCH. In addition to these Lyons products, it may be used to bond other materials to various surfaces. P-100 is an aqueous resin emulsion. It is a film forming copolymer emulsion.

PRODUCT APPLICATIONS• Use P-100 as a primer for FLOWCRETE, PATCHCRETE and POWER-CRETE. • It is used as a surface bonder to bond fresh cementitious materials.• It may be used as an integral polymer modifier for cementitious materials. • P-100 increases the bond strength and water resistance of cementitious materials.• Use P-100 in the repair of concrete, plastered ceilings and walls and stucco surfaces.

PRODUCT FEATURES• VOC Compliant. Not a PVA.• High Solids Copolymer emulsion.• Not moisture sensitive after use. Inside or outside use.• Re-emulsifiable, one time only.• Use as a surface bonder. Use as integral polymer modifier for cement mortars.• Use as primer for SUPER FLOWCRETE, PATCHCRETE, POWER-CRETE and CAST-PATCH.• Improved strength as a polymer modifier.TECHNICAL DATAP-100 meets requirements of ASTM C-1059

PATCHCRETE®

TWO-COMPONENT, ACRYLIC POLYMER MODIFIED TOPPING AND UNDERLAYMENT, OVERHEAD AND WALL REPAIRS

PATCHCRETE is a two-component polymer modified concrete repair, topping, and underlayment material. The PATCHCRETE liquid is a high solids content acrylic polymer. The PATCHCRETE Powder #1005 is a Portland cement based mix with graded silica and special chemical additives. Polymer modified concrete gives improved bonding, improved chemical resistance,improved water resistance and improved tensile, compressive and flexural strengths.

This high strength Portland cement/acrylic polymer combination provides a smooth durable semi-resilient surface which can be used as a finished floor in most applications. PATCHCRETE is easy to mix and apply, requiring no special tools. It is suitable for use as a screedable topping and underlayment, or as a floor, wall or overhead repair material when mixed to a stiffer trowelable consistency. PATCHCRETE has been approved by the USDA for use in most processing plants and may be used where there is exposure to potable water. Use of PATCHCRETE can help your project earn LEED Credits.

PRODUCT APPLICATIONSPATCHCRETE is designed to be used both as a topping or underlayment and as a wall, floor, and overhead patching and repair material when mixed to a stiffer consistency. For use as an underlayment, mix to the consistency of a thick pancake batter. Use PATCHCRETE to level and smooth rough or rained on concrete. PATCHCRETE may be used to level low areas inside or outside. It will bond to and may be used to level virtually any concrete surface. Mixed as a repair material, PATCHCRETE may be used to repair walls, floors, tilt panels, driveways, sidewalks, precast members, etc. PATCHCRETE may be applied from featheredge to 2-1/2 inches. Suitable for interior or exterior applications. Suitable forapplication where there is rubber tired forklift and vehicle traffic.

PRODUCT FEATURES• Outstanding bonding.• Improved water resistance.• Interior or exterior use.• From featheredge to 2-1/2”.• May be used as screedable underlayment.• May be used as a trowelable repair material.• Improved compressive strength.• No moist curing required.• High solids acrylic polymer.• May be stained or used with integral color.• May be used for stenciled and decorative concrete.• LEED credits applicable.

PRODUCT SPECIFICATIONS WORKING TIME: Approx. 25 minutes COLOR: Light gray, available in white INITIAL SET: 4 Hours

FLOWABLE CONSISTENCY: (1 bag to 1 gallon) Compressive Strength (ASTM C-109, Air Cured) 7 Days: 28 Days: 4120 PSI 5500 PSI Flexural Strength (ASTM C-348, Air Cured) 7 Days: 28 Days: 1260 PSI 1535 PSI Slant Shear Bond (ASTM C-1042, Air Cured) 28 Days: 1250 PSI

TROWELABLE CONSISTENCY: (1 bag to .8 gallon) Compressive Strength (ASTM C-109, Air Cured) 7 Days: 28 Days: 4550 PSI 6000 PSI Flexural Strength (ASTM C-348, Air Cured) 7 Days: 28 Days: 1360 PSI 1720 PSI Slant Shear Bond (ASTM C-1042, Air Cured) 28 Days: 1550 PSI

CONCRETE REPAIR


CONCRETE REPAIR

73www.spec-west.com

SUPER FLOWCRETE®

SELF-LEVELING TOPPING – QUICK TURNAROUND

SUPER FLOWCRETE is a technically advanced Portland cement based material which is self-leveling, self-drying and will perform very well as an interior finished floor, wearing surface or underlayment. It is a one-component, polymer modified scientific blend of cements, select graded silica and special additives. SUPER FLOWCRETE is self-drying through an internal chemical reaction which uses the water not needed for hydration.

SUPER FLOWCRETE gives a smooth, flat finished floor which is suitable for quick application of floor coverings or use as a finished wearing surface.

PRODUCT APPLICATIONSSUPER FLOWCRETE is designed to be used as a self-leveling wearing surface topping, underlayment or decorative finished floor. It is easy to apply and provides a smooth, tough finished floor. Use it as a new floor or for floor repairs in residential, retail, commercial, warehouses, utility areas and light manufacturing facilities. SUPER FLOWCRETE is suitable for hard rubber tire forklift traffic.

When SUPER FLOWCRETE is used as an underlayment, breathable floor cov-erings such as carpet, tile, etc., may be applied as soon as the material has dried (normally 6-8 hours). Non-breathable coverings or coatings such as epoxy, ure-thane and seamless flooring, may be applied as soon as 24 hours later.

SUPER FLOWCRETE is also designed to be used as an interior decorative floor for retail, hotel, restaurants and similar applications. Integral concrete colors and stains may be used to make decorative patterns and designs.

PRODUCT FEATURES• Self-leveling.• Self-drying.• Light gray concrete color, also available in white.• Use for warehouses/forklift traffic.• Underlayment from feather to 2”.• Wearing surface from 1/4” to 2”.• Easy to mix and apply.• Not a gypsum product.• Pumpable.

PRODUCT SPECIFICATIONS COLOR: Light gray or white FLOW AND SELF-HEAL TIME: 10-12 Minutes WORKING TIME: 25 Minutes INITIAL SET (ASTM C-191): 19 Minutes FINIAL SET (ASTM C-191): 49 Minutes COMPRESSIVE STRENGTH (ASTM C109, Air cured) 1 Day 3 Days 7 Days 28 Days 2600 PSI 3900 PSI 5300 PSI 6100 PSI FLEXURAL STRENGTH (ASTM C-348, Air Cured) 3 Days 7 Days 28 Days 925 PSI 1316 PSI 1360 PSI SLANT SHEAR BOND STRENGTH (ASTM C-1042, Air cured) 28 Days P-100 PRIMER 935 PSI SHRINKAGE: (ASTM C-596, Air Cured) 7 Days 28 Days .03% .04% ABRASION RESISTANCE (ASTM C-944, Internal test) 28 Days 62% Wt. loss - Very Good

POWER-CRETE®

SINGLE COMPONENT, STRUCTURAL REPAIR MATERIALUSE DOWN TO 32°F

POWER-CRETE is one component structural concrete repair material suitable for a wide range of applications. It is Portland cement based with select graded silica and proprietary modifiers to enhance strength and durability.This unique combination of materials gives a repair which is dimensionally stable, extremely strong, has an outstanding bond to a concrete surface and provides structural integrity. P-100 Primer is used with POWER-CRETE to insure a consis-tent and reliable bond For surfaces with a low porosity, POWER-CRETE can be installed with EP-200 EPOXY PRIMER. POWER-CRETE has an outstanding bond compressive strength, flexural strength, wear resistance and high early strength.

PRODUCT APPLICATIONSPOWER-CRETE is a fast-setting trowel grade repair material for horizontal applica-tion. It may be used to repair parking decks, bridge structures, pier and deck sup-ports, water and sewage treatment plants, factory and warehouse floors, manholes, for concrete topping and other similar applications.

Use POWER-CRETE when the repair must be ready for service in 8 hours. Use in cold weather, down to 32°F. It may be used for interior or exterior repairs, above or below grade. POWER-CRETE may be used from 1/2” to 6”.Suitable for applications with vehicle and forklift traffic.

PRODUCT FEATURES• High early strength.• Ready for service in 8 hours.• Apply from 1/2” to 6”.• Use down to 32°F.• High compressive and flexural strength.• Outstanding bonding.• Wearing surface.• Interior or exterior use, above or below grade.• Can be mixed with integral color.

PRODUCT TEST RESULT (Typical) COLOR: Light gray WORKING TIME: Approx. 20 Minutes COMPRESSIVE STRENGTH (ASTM C-109, Air cured) 1 Day 3 Days 7 Days 28 Days 4265 PSI 6925 PSI 7775 PSI 8900 PSI FLEXURAL STRENGTH (ASTM C-348, Air Cured) 3 Days 7 Days 28 Days 879 PSI 1227 PSI 1790 PSI BOND STRENGTH (ASTM C-1042, Air cured) (P-100 PRIMER) 28 Days 1490 PS SHRINKAGE (ASTM C-596) 7 Days 28 Days 0.01% 0.01%

DIVISION3.4

CONCRETE REPAIR

74

Flex Without Failure

Can Your Concrete Do This?Can Your Concrete Do This?

The World’s Most Amazing Cementitious Patch and Overlay Product!The World’s Most Amazing Cementitious Patch and Overlay Product!

Available in Three Formulations – Just Add WaterAvailable in Three Formulations – Just Add Water

Applications include:Bridge RepairCulvertsSidewalk RepairICF CoatingWall RepairCurb Repair

Crack & SpallPot HolesDecorative OverlayStructural UnderlaymentAlligatored (broken) Asphalt

Elephant Armor™ can be applied directly over ‘alligator skin’ asphalt without deconstruction.

Concrete repairs are made possible in remote ordifficult sites with Elephant Armor™.

Overhead repairs are easy with Elephant Armor™,forming is not required.

Before

Before

BeforeAfter

After

Concrete overlay without deconstructingthe failed substrate.

Use Elephant Armor™ to create outdoor furnishings,countertops, simulated stonework, etc.

Elephant Armor™ can be troweled, rolled, sprayed, stamped and stained.

Before Before

AfterAfter

• Fiber reinforced: Superior flexural and tensile strength as thin as 1/4”.• High ductility, allowing the overlay or patch to

‘FLEX’ without failure.

• Superior tensile strain capacity of other cement-based products.

• 10 Times the bond strength of other fiber based mortars for superior crack resistance.

• Prevents the propagation of existing cracks through the surface.

• Resists deicing salts, freeze/thaw.• Highly impermeable, abrasion resistant.

4000 PSI in 4 hours

™


CONCRETE REPAIR

75www.spec-west.com

Elephant Armor™ can be used for structural monolithic overlays for interior and exterior applications. Elephant Armor™ can be used as an underlay-ment for other overlay materials such as cementitious or epoxy types. It has unsurpassed flexural and tensile strengths and can be used to create seamless floors. Elephant Armor™ offers excellent workability and is BEST APPLIED to desired thickness with an approved roller or concrete tamping roller, to maintain the proper fiber dispersion. Elephant Armor™ will accept all finishes and placement similar to standard concrete such as smooth trow-el, broom, grooved and stamped. Elephant Armor™ accepts all types of pigments, stains and sealers. Elephant Armor™ is pre-packaged and comes ready to use. Its ease of use is unparalleled - all you have to do is add water.

Elephant Armor™ is currently being used by: Departments of Transportation, Municipalities, Airports, Military Bases, Waterand Power Authorities, Decorative Concrete Installers, Concrete Artisans and Asphalt Repair Specialists.

Prep and Clean• Cut a hard edge around area using a 1/2 inch crack chaser blade.• Do not feather edge.• Clean area thoroughly with pressure washer.

Prime• Apply a concrete bonding adhesive that meets ASTM C 1059 requirements.

Apply• The Elephant Armor was applied with a tamp roller and finished with a

trowel and broom.• Spray with Paristaltic pump or hopper gun (must work with fibers).

Finish• Steel trowel, fresno, textured stamp (mat or roller) or broom.• Apply a water or resin based curing compound immediately after finishing.

Graduate thickness with roller guides.

Recommended application tools.

Flexural Splitting Compressive Strength Tensile Strength ASTM C 947 ASTM C 496 ASTM C 109 Cube

EA Mortar 6.7 mpa (950 psi) 4.2 mpa (602 psi) 34.7 mpa (4940 psi) 28 days 28 days 56 days

EA Asphalt Patch 8.8 mpa (1259 psi) 5.9 mpa (838 psi) 45.8 mpa (6510 psi) 28 days 28 days 28 days

EA DOT 10.5 mpa (1493 psi) 7.9 mpa (1126 psi) 55 mpa (7837 psi) 7 days 28 days 28 days

Reopened

for use in

less than

2 hours

DIVISIO

N3 .4

CONCRETE &MASONRY PRODUCTS

CONCRETE MIXOriginal 4000 psi average compressive strength blend of Portland cement, sand, gravel or stone, and other approved ingredients. Just add water. Use for• Floors • Footings • Steps • Sidewalks• Patios • Curbs • Setting PostsExceeds the requirements of ASTM C 387Item No. 1101-80 80 lb. bag

76

MASON MIXHigh strength, contractor grade, pre-blended mortar mix. Contains properly graded masonry sand and requires only the addition of water.

Use for structural and non-structural masonry applications above and below grade. • Walls • Brick/stone veneers • Columns • Tuck pointingMeets the requirements of ASTM C 270 & C 1714Item No. 1136-80 80 lb. bag Type S

COUNTERTOP MIXA specially formulated, flow-able, high strength concrete mix for use in pre-cast and cast-in-place concrete countertop applications.

Benefits & Features• Strip forms in 18 hours.• High flow formula minimizes the need for mechanical vibration.• Reduced shrinkage formulation.• Exceeds 2,500 PSI (17.7 MPa) @ 3 days; 3,500 PSI (24.1 MPa) @ 7

days; 5,000 PSI (34.5 MPa) @ 28 days.Item No. 1106-80 80 lb. bag GrayItem No. 1106-81 80 lb. bag Tint Base White

QUIKRETE® 5000CONCRETE MIXCommercial Grade concrete mix designed for higher early strength gain. Achieves 2,500 PSI in 3 days and 5,000 PSI in 28 days. Ideal for cold weather application.Use for• Concrete projects 2” thick or more that require high strength.• Driveway aprons • Patios • Curbs• Sign footings • Deck supports • FloorsExceeds the requirements of ASTM C 387Item No. 1107-00 80 lb. bag

PORTLAND CEMENTMixed with aggregate and other ingredients to make concrete mix, mortar mix and base coat stucco. To make Concrete Mix: 3 Parts Gravel, 2 Parts All-Purpose Sand, and 1 Part Portland Cement (by volume).To make Type S Mortar Mix: 3½ to 4½ Parts Masonry Sand, ½ Part Hydrated Lime, and 1 Part Portland Cement (by volume).

Meets the requirements of ASTM C 150 and Federal Specifications for Portland cement.Item No. 1124-94 94 lb. bag Type I/II

ALL-PURPOSE GRAVELMulti-use product for a variety of decorative and landscaping applications. Also for making concrete. Washed, properly graded gravel.

Use for• Landscaping, gardening, patios, tree wells, walks, rooftops, fish ponds and aquariums.• Mix with Portland cement and all purpose sand to make concrete mix. Meets ASTM C 33 specifications.Item No. 1151-50 50 lb. bag

FASTSET CONCRETE MIXA rapid hardening concrete mixdesigned with a 20-30 minute set time, allowing for mixing, pouring and finishing. Use at any thickness from 1½” to 24”.

Use to build or repair: • Street repairs • Concrete parking lots • Highways• Concrete floors • Bridge decks • SidewalksCompressive strength ASTM C 393 Hours 3000 psi 20.7 MPa24 Hours 5000 psi 34.5 MPa7 Days 6000 psi 41.3 MPa Exceeds requirements of 28 Days 7000 psi 48.3 MPa ASTM C 928 R-3Item No. 1004-51 70 lb. bag

ATHLETICFIELD MARKERPulverized white limestone or marble used for markingathletic fields.Item No. 1111-60 50 lb. bag


CONCRETE REPAIR

77www.spec-west.com

Roadware 10 Minute Concrete Mender™ is a two-part polyurethane that penetrates deep into concrete to make permanent repairs. At less than 8 cps, Concrete Mender actually injects itself into the matrix of the concrete and shores up the existing concrete as well as making the repair. Concrete Mender eliminates the bond line and Microdowles into the concrete. Cures grey.

ROADWARE 10 MINUTE CONCRETE MENDER™

Exclusive slab to slab Microdoweling™ action, provided by Roadware 10 Minute Concrete Mender™, links concrete slabs together, restores aggregate interlock, and allows for full-traffic, dynamic-load transfer, in 10 Minutes. This Microdoweling™ action is more compatible with concrete and more effective than epoxy injection. Millions of micro-dowels penetrate the concrete and then bond, side by side, broken and jointed slabs. Hairline cracks, delamination cracks, irregular cracks, spalled control joints and variable depth spalls are quickly repaired with this amazing technology.

Industrial FloorsRepair cracks and spalls, plus control joints more than one year old. Tough enough for the heaviest lift truck service.Cold StorageRepair frozen concrete below -20°F. It will take a few hours to cure, but the repair will last.AnchoringAnchor bolts and repair railing mounts quickly and easily.Structural RepairConcrete Mender™ is a structural repair that can bond a slab back together and transfer dynamic loads. Use caution when repairing exterior concrete or re-cracking may occur.

DelaminationsUnique Microdoweling™ action can penetrate deep into concrete cracks. Use to rebond delaminated slabs.PolishingConcrete Mender may be honed, polished without gumming up the pads or smearing into the surface.Floor Coating PrepRepair cracks, spalls and joints prior to floor coating. Compatible with most industrial floor coating systems.Exterior RepairsConcrete Mender cures grey, but will turn buff/yellow when exposed to sunlight over time. Coat exterior repairs with MenderBlender™ or similarmaterial if needed.

Approximate yield with 40-30 silica sand mixed 2 parts sand to 1 part liquid. SIDE A SIDE B SAND MIXED MATERIAL CUBIC INCHES 4 oz. 4 oz. 16 oz. 17.5 oz. 32 8 oz. 8 oz. 32 oz. 35 oz. 64 16 oz. 16 oz. 64 oz. 70 oz. 128 1/2 gal. 1/2 gal. 2 gal. 2.2 gal. 508 1 gal. 1 gal. 4 gal. 4.4 gal. 1016General formula for higher sand content: (liquid + sand) 0.733

Product No. Description 80300 300 x 300ml Cartridge 80020 2-Gallon Kit 80050 10-Gallon Kit 1005 Static Mixer 24 Element 1105 Flow Restrictor 1006-14/15/18 Needle Tip Mixer 5300 600ml Application Gun

DIVISIO

N3 .4

CONCRETE REPAIR

78

Roadware MatchCrete™ Clear is a two-component aliphatic polyurethane for repairing cracks, spalls and joints in concrete subject to UV exposure from sunlight. This material is clear in appearance when applied and cured. Colored sand and pigments may be added to create color stable repairs that match most any decorative or shade of concrete surface. MatchCrete™ Clear will not significantly change color with exposure to sunlight over time. Roadware Flexible Cement II™ is a semi-flexible polyurethane for

repairing low movement cracks and control joints.

ROADWARE MatchCrete™ CLEAR ROADWARE FLEXIBLE CEMENT II™

Match colorsBy adding small amounts of dry color pigment and sand, many different colors can be made. Use colored sand for deeper color effect.Exterior RepairsMatchCrete™ Clear cures clear and will stay clear under sunlight. MatchCrete™ Clear is a structurally solid material. Use caution when repairing exterior concrete or recracking may occur.Polished ConcreteMatchCrete™ Clear may be polished in several hours. Use before or after polishing for repairs that will not distract from the polished concrete look.Exposed AggregateMatchCrete™ Clear cures clear so repairing exposed aggregate concrete is easy. MoistureConcrete and sand need to be dry before application.

Exterior RepairsUse Flexible Cement II™ to repair cracks and protect control joints in parking structures, bridge decks, loading docks and many types of struc-tural concrete.Control JointsUse in industrial floors to protect saw-cut control joints from wheel traffic damage.Cove jointsUse Flexible Cement II™ to seal cove joints where the floor meets a structural wall.Electrical PoddingSeal electrical loops and embedded lighting systems.ThresholdsRepair concrete thresholds with high thermal differentials.MoistureFlexible Cement II™ is tolerant of surface moisture when applied. Concrete should be as dry as practical to insure a good bond.High TrafficRepairs are tough and can handle heavy industrial traffic.Concrete BondingFlexible Cement II™ is an excellent flexible adhesive for bonding metal, wood and synthetic materials to concrete. Use to bond moldings and tack strips to concrete floors. Bonds asphalt to concrete.

Product No. Description 71105 50ml Cartridge w/Needle Tip 5150 50ml Application Gun 71300 300 x 300ml Cartridge 71020 2-Gallon Kit 1005 Static Mixer 24 Element 1105 Flow Restrictor 1006-14/15/18 Needle Tip Mixer 5300 600ml Application Gun

Product No. Description 91300 300 x 300ml Cartridge 91020 2-Gallon Kit 91050 10-Gallon Kit 1036 Static Mixer SQ 24 Element 5300 600ml Application Gun


CONCRETE REPAIR

Miracle Bond Easy Flow 8.6 oz.

79

Two-Part Repair EpoxyProduct Description:Miracle Bond® Easy Flow is a two-component, rapid curing, high strength, non-sag epoxy adhesive.Uses:Can be used as an adhesive for general purpose repair on most materials. Miracle Bond® Easy Flow works best on rough materi-als such as concrete, block, brick, stone or wood, but may be used on many other materials (even fiberglass) with excellent results.Shelf Life: 24 months at 40-95ºF.Applications Include:• Repairing loose railings• Filling voids in rotted wood• Bonding fresh concrete to hardened concrete• Bonding hardened concrete to hardened concrete• Bonding traffic markers/road buttons to concrete/

asphalt• Crack injection sealer around ports and cracks• Non-sag spall and patching material.Features & Advantages:• Two-part epoxy provides long lasting repairs• Non-sag/No-Drip formula for versatility• Moisture insensitive - Even cures underwater.No Nozzle No Problem!Often, a user will not have an extra nozzle for a recapped cartridge. The remaining material can still easily be used. Epoxy must be mixed in a 1:1 ratio of part A to part B . Next, dispense the epoxy into a cup or onto a flat disposable surface. Mix the two parts using a putty knife or another suitable flat mixer. Continue to mix until a consistent gray color is obtained without any streaks.

Crackbond® CSRRapid Cure Polyurethane Crack/Spall RepairProduct Description:Crackbond® CSR is a specially formulated, very low viscosity, two-part, hybrid polyurethane rapid cure concrete repair material.General Uses:• Repair spalls and cracks in high traffic areas• Repair floors prior to floor grinding/polishing• Rebuild spalled floor joints and concrete edges• Repair concrete on bridge and parking decks• Repair of interior and exterior

hairline cracks.Features & Advantages:• Penetrating, super low viscosity

provides high bond strength• Reaches 4,900 psi in 1 hour• Use in temperatures to 0°F• Cures in 20 minutes • Self-leveling• Provides excellent results when polished• Add aggregate for use as mortar.

Crack-KitCrack Injection and Concrete Repair KitThe Crackbond Epoxy Crack Injection System is a unique, high quality, low cost method of structurally re-bonding cracks. It contains everything you’ll need to structurally repair eight feet of crack.

Key Uses:• Crack injection• Concrete crack and

spall repair• Bonding concrete to concrete• Patching Material• Primer for industrial

coatings• Healer Sealer• Epoxy Grouting

• Gravity fed structural crack repair

• Mortar when mixed with sand• Capping paste sealer• Fix Cracks• Rotted Wood• Loose Railing• Broken Steps• Broken Concrete.

DIVISIO

N3 .4

EPOXY

80

TECHNICAL DATA* Property Typical Data Test Method 7 Day Cure @ 77°F (25°C) Tensile Strength, psi 7,000 (48.3 MPa) ASTM D 638 Elongation, % 1.6 ASTM D 638 Hardness, Shore D 85 ASTM D 2240 Flexural Strength, psi 8,000 (55.2 MPa) ASTM D 790 Flexural Modulus, psi 520,000 (3,585 MPa) ASTM D 790 Compressive Yield Strength, psi 12,000 psi (82.7 MPa) ASTM D 695 Compressive Modulus, psi 260,000 (1,800 MPa) ASTM D 695 Bond Strength, psi (2 days) 2,500 (17.25 MPa) ASTM C 882 Bond Strength, psi (14 days) 3,200 (22.08 MPa) ASTM C 882 Absorption, % (24 hours) 0.13% ASTM D 570 Linear Coefficient of Shrinkage 0.004 ASTM D 2566

PACKAGING1 Quart (.95 L), 1 Gallon (3.79 L), 15 Gallon (56.85 L) Units

TECHNICAL DATA* REZI-WELD™ 1000 REZI-WELD™ GEL PASTE Required per Required per Test Method Actual ASTM C 881, Type IV Actual ASTM C 881, Type IV Gel Time (ASTM C 881) 37 minutes Min. 30 minutes 45 minutes Min. 30 minutes Viscosity (ASTM D 2393, Mixed) 3,500 cps Max. 10,000 cps (ASTM C 881-99, Mixed) 1/2” Bead–No Sag Min. 1/4” Bead–No Sag Compressive Strength (ASTM D 695-96) 1 day 10,000 psi (70 MPa) Not Required 9,000 psi (62 MPa) Not Required 7 days 12,500 psi (79 MPa) Min. 10,000 psi (70 MPa) 11,500 psi (79 MPa) Min. 10,000 psi (70 MPa) Compressive Modulus (7 days) (ASTM D 695-96) 530,000 psi (3,655 MPa) Min. 200,000 psi (1,400 MPa) 400,000 psi (2,758 MPa) Min. 200,000 psi (1,400 MPa) Slant Shear Bond Strength (ASTM C 882, Moist Cured) 2 days (Old to Old Concrete) 1,250 psi (8.6 MPa) Min. 1,000 psi (7.0 MPa) 1,500 psi (10 MPa) Min. 1,000 psi (7.0 MPa) 14 days (Old to Old Concrete) 1,900 psi (13.1 MPa) Min. 1,500 psi (10.0 MPa) 2,000 psi (14 MPa) Min. 1,500 psi (10.0 MPa) 14 days (New to Old Concrete) 2,100 psi (14.5 MPa) Min. 1,500 psi (10.0 MPa) 2,500 psi (17 MPa) Min. 1,500 psi (10.0 MPa) Tensile Strength (7 days) (ASTM D 638-98) 7,250 psi (51 MPa) Min. 7,000 psi (48 MPa) Tensile Elongation (7 days) (ASTM D 638-98) 1.5% Min. 1% 1.5% Min. 1% Heat Deflection Temperature (7 days) (ASTM D 648-98) 135°F (57°C) Min. 120°F (50°C) 125°F (53°C) Min. 120°F (50°C) Linear Coefficient of Shrinkage (7 days) (ASTM D 2566) 0.002 Max. 0.005 0.003 Max. 0.005 Water Absorption (7 days) (ASTM D 570-98) 0.41% w/w Max. 1.0% w/w 0.51% w/w Max. 1.0% w/w

REZI-WELD™ GEL PASTE – Gel Consistency-Thixotrophic, Multi-Purpose Construction EpoxyREZI-WELD GEL PASTE is a highviscosity, rapid setting, thixotrophic,structural, epoxy-based, chemicalanchoring/bonding adhesive andinjection resin. It provides highmechanical properties and bond strength to concrete and various other substrates. It is a two-component, moisture-insensitive construction epoxy, which can be troweled, brushed, injected, or pumped. It is an easy-to-mix, easy-to-apply paste ideal for filling cracks, anchoring, doweling, and making small patches and general repairs in horizontal, vertical, and overhead concrete surfaces. It is also suitable for surface sealing prior to pressure injection. When used as an adhesive, It fills all voids between surfaces to be bonded. PACKAGING1 Quart (.95 Liter) Units, 1 Gallon (3.79 Liter) Units,2 Gallon (7.58 Liter) Units, 10 Gallon (37.9 Liter) Units

REZI-WELD™ – Low Viscosity Injection EpoxyDesigned for gravity feeding orpressure injecting using two-component metering systems,hand-held bulk guns, or pressurepots. It is suitable for injecting fine, non-moving structural cracks for long-term repairs. FEATURES/BENEFITS• Ideal for pressure injection and gravity feeding.• Advantageous as a low viscosity, epoxy adhesive binder.• Bonds cured concrete to fresh or hardened concrete.• Combines with aggregate to form an interior non-skid topping.• Resists many industrial chemicals.• Features low viscosity, high modulus, high strength, self-leveling char-

acteristics. • Furnished in unitized packaging.• Can be extended with sand to make an epoxy mortar. *All technical data is typical information, but may vary due to test methods, conditions and operators.

REZI-WELD™ 1000 – Multi-Purpose, Medium Viscosity Construction EpoxyREZI-WELD 1000 is a medium-viscosity, two-component, construction-grade structural epoxy adhesive. It is moisture-insensitive and resistant to many chemicals. As a neat mix, REZI-WELD 1000 is used to bond hardened concrete to fresh or hardened concrete. It can also be used to bond metals and other materials to hardened concrete. REZI-WELD 1000 is also used to secure metal anchors, bolts, rebar, and dowels in concrete. Mixed with sand or aggregates, REZI-WELD 1000 may be used to patch spalls or defects in concrete. A thin film coating sprinkled with sand or grit becomes a durable, non-skid interior topping. PACKAGING1 Quart (.95 Liter) Units, 1 Gallon (3.79 Liter) Units,2 Gallon (7.58 Liter) Units, 10 Gallon (37.9 Liter) Units


ANCHORINGAND DEMOLITION

Ultrabond 365CC

81www.spec-west.com

Cracked Concrete Code CompliantHybrid Anchoring AdhesiveMaterial Properties:• 13 oz. and 20 oz. cartridges with

3:1 mix ratio• Moisture insensitive • In-Service

temperature range of

5°F - 302°F • ASTM C881-14

Type I, II, IV and V, Grade 3, Class A, B and C

• 12-month shelf life.Features & Approvals:• ICC-ES ESR-3770

evaluation report for cracked and uncracked concrete

• Offering the highest elevated-temperature creep performance in the market today

• Approved extended installation temperature range of 5°F - 104°F

• Full cure in 45 minutes at 77°F• IBC/IRC: 2012, 2009 and 2006• FBC: 2012 and 2010.General Uses & Applications: • Anchoring threaded rod and reinforcing bar (rebar)

into either cracked or uncracked concrete• Bonding hardened concrete to hardened concrete

and freshly mixed concrete to hardened concrete• For use in vertical down, horizontal, upwardly

inclined and overhead installations• Resists static, wind and earthquake loading in tension and shear (IBC Seismic Design Categories A-F)• All season hybrid anchoring system for dry, damp

and water-saturated concrete.

Crackbond® JF-311

The Cracker®

Non-Explosive Cracking AgentThe Cracker® is a non-explosive cracking agent that can crack any hard rock or reinforced concrete. The Cracker is a universal product which may not only be substituted for explosives, hydraulic wedges, rock breakers, and concrete crackers, but can also be used in many places where other methods are impractical. Produced in powder form, The Cracker need only be mixed with water and poured into predrilled holes for dramatic results.Key Usage Facts:You’ll need to know the following to determine how much product you’ll need. What is the size and shape of the object to be demolished? What size pieces are you looking to create? Is there a free edge? Will the substrate be over or under 72°F? Is the substrate reinforced? What is the substrate psi?For complete info, see Cracker video (atcepoxy.com) and download the Cracker technical manual.

SAFE • QUIET • NON-TOXIC • POWERFUL

Polyurea Joint FillerCrackbond® JF-311 is a two-component, rapid curing, polyurea elastomeric joint filler material. It is self-leveling, 100% solids and flexible, allowing 10-15% movement of installed joint width.Features & Advantages:• NO VOCs ensures low odor• Fast setting formula provides quicker job completions and open traffic time• Abrasion resistance enables heavy traffic capability• Wide temperature range (-40°F to 120°F) gives product versatility.Uses: May be used to fill interior control joints or new construction saw joints on horizontal concrete surfaces. Designed for industrial floor applications receiving heavy vehicle traffic and can be used in exterior applications where minimal joint movement from thermal cycling will occur. For expansion joints use Adhesives Technology’s Crackbond® EJ formula.

DIVISIO

N3 .4

ANCHORING ADHESIVE & MECHANICAL ANCHORS

82

SET-XP® (22 oz.) High-Strength Anchoring Adhesive for Cracked and Uncracked ConcreteSET-XP® is a 1:1 two-component, high-solids, epoxy-based anchoring adhesive formulated for optimum performance in both cracked and uncracked concrete. SET-XP® adhesive has been rigorously tested in accordance with ICC-ES AC308 and 2009 IBC requirements and has proven to offer increased reliability in the most adverse conditions, including performance in cracked concrete under static and seismic loading. SET-XP® adhesive is teal in color in order to be identified as a high-performance adhesive for adverse conditions. Resin and hardener are dispensed and mixed simultaneously through the mixing nozzle. SET-XP® adhesive exceeds the ASTM C 881 specification for Type I and Type IV, Grade 3, Class C epoxy.Uses When SET-XP® adhesive is used with all threaded rod or rebar, the system can be used in tension and seismic zones where there is a risk of cracks occurring that pass through the anchor location. It is also suitable for uncracked concrete conditions.Shelf Life / Storage Conditions24 months from date of manufacture in unopened side- by-side cartridge. For best results, store between 45–90°F. To store partially used cartridges, leave hardened nozzle in place. To re-use, attach new nozzle.Chemical ResistanceVery good to excellent against distilled water, in-organic acids and alkalis. Fair to good against organic acids and alkalis, and many organic solvents. Poor against ketones. For more detailed information, contact Simpson Strong-Tie or Spec-West.

STRONG-BOLT® 2Wedge Anchor for Cracked and Uncracked ConcreteThe Strong-Bolt® 2 wedge anchor is the next-generation solution for cracked and uncracked concrete.• Category 1 anchor classification, the highest

attainable anchor category for reliability.• Tri-segmented clip – Each segment adjusts independently.• Dual embossments on each clip segment – Enables

clip to undercut into the concrete.• The Strong-Bolt 2 anchor can be installed in cracked

concrete with a minimum thickness of 3-1/4”, including concrete-over-metal decking.

• High-strength alloy clip on carbon-steel anchors.• Fits most fixtures and installs with common drill bit

sizes and tools.• Type 316 stainless-steel clip on stainless steel anchors.

Titen HD®

Screw Anchor for Cracked and Uncracked ConcreteThe Titen HD® anchor is a patented, high-strength screw anchor for both cracked and uncracked concrete, and masonry. • Now offering 1/4” diameter for cracked and

uncracked concrete.• Code-listed under the current IBC/IRC in

accordance with AC193 for cracked concrete applications per ICC-ES ESR-2713.

• Code-listed under the current IBC/IRC in accordance with AC106 for masonry

applications per ICC-ES ESR-1056.• Serrated teeth on the tip of the Titen HD screw.• Thread design undercuts to efficiently transfer the

load to the base material.• No special drill bit needed.• Installs with 50% less torque.• Hex-washer head.• Removable.

ANCHORING ADHESIVE

MECHANICAL ANCHORS

PROPERTY TEST METHOD RESULTSConsistency ASTM C 881 Passed, non-sagGlass transition temperature ASTM E 1356 155°F (68° C)Bond strength (moist cure) ASTM C 882 3,742 psi at 2 daysWater absorption ASTM D 570 0.10%Compressive yield strength ASTM D 695 14,830 psiCompressive modulus ASTM D 695 644,000 psiGel time ASTM C 881 49 minutes

Base Material Temperature Gel Time Cure Time °F °C (min.) (hr.) 50 10 75 72 60 16 60 48 70 21 45 24 90 32 35 24 110 43 20 24 For water-saturated concrete, the cure times are doubles.

Cure Schedule


DIAMOND BLADES

83www.spec-west.com

GENERAL PURPOSE DIAMOND BLADE BOB 14”x.125”x1”BOB14

BOB’s unique segment design reduces vibration and results in a quicker, smoother, faster lowest cost cut. The laser welded segments, cooling holes and a slant U-Gullet with undercut protection allows for cutting yet not limited to asphalt, block, brick, clay pavers, concrete, ductile iron pipe, plastic pipe, field stones, green concrete, hard brick, hard concrete, marble, granite, pavers and refractory brick. For use on cut-off saws or walk-behind saws of 24hp or less.Segment Height: 10mm | Wet or dry use

COMBO DIAMOND BLADE ECONOMY 14”x.125”x1”ECONOGP14-YELLOWLABEL

Our economy general purpose blade can be used with consistent performance on a variety of concrete, masonry and medium-hard materials. For use on cut-off saws or walk-behind saws of 24hp or less.Segment Height: 12mm | Wet or dry use

CONCRETE DIAMOND BLADE PREMIUM 14”x.125”x1”PREMCC14-PURPLELABEL

Premium series for cutting cured concrete. Contains arranged diamonds, laser welded and polished narrow U-Slot gullets for increase speed of cut and blade life. For use on walk-behind saws 24hp or less.Segment Height: 13mm | Wet use

ASPHALT DIAMOND BLADE STANDARD 14”x.125”x1”STANDAC14

Standard Asphalt blade, laser welded with wear-resistant bond with undercut protection. Engineered for cutting asphalt and asphalt over concrete. For use on cut-off saws or walk-behind saws of 24hp or less.Segment Height: 11mm | Wet or dry use

CONCRETE DIAMOND BLADE STANDARD 14”x.125”x1”STANDCC14-GREENLABEL

Standard Series blade, soft bond, laser welded, with polished key hole gullet, for cutting concrete. For use on cut-off saws or walk-behind saws of 24hp or less.Segment Height: 12mm | Wet use

COMBO DIAMOND BLADE STANDARD 14”x.125”x1”STANDGP14-BLUELABEL

The Standard series Combo blade can be used with extended performance on asphalt, block, brick, clay pavers, concrete, ductile iron pipe, plastic pipe, field stones, green concrete, hard brick, hard concrete, marble, granite, pavers and refractory brick. For use on cut-off saws or walk-behind saws of 24hp or less.Segment Height: 12mm | Wet or dry use

Spec-WestYour source for the highest quality and most cost effective products .

800-723-SPECwww .spec-west .com

DIVISIO

N3 .4

SMALL DIAMOND BLADES

84

TURBO, STANDARD DIAMOND BLADE 4”x7/8”C4C4R

SEGMENTED, STANDARD DIAMOND BLADE 7”x7/8” Arbor w/ Diamond KnockoutC5179

TURBO, STANDARD DIAMOND BLADE 7”x7/8” Arbor w/ Diamond KnockoutC4C7R

Standard series turbo blade gives smooth cuts in most concrete and masonry materials. Industrial quality diamonds with consistent and even distribution.

TUCK POINTING, STANDARD DIAMOND BLADE 4-3/8”x.250”x7/8”ZM80C10TP

Standard tuck pointing diamond blades provide fast cutting speeds and good blade life. Premium blades provide fast cutting speeds and have a higher diamond count than standard grade blades for extend-ed blade life. All grades can be used wet or dry.

Crack Chaser blades will quickly rout and widen cracks in concrete, asphalt or masonry and are excellent for mortar removal.

Standard series segmented blade give fast accurate cuts in a wide range of common building materials. Industrial quality diamonds with consistent and even distribution.

CRACK CHASER, CONTINUOUS DIAMOND BLADE 4”x5/8-11CRC4AIHT/CRC458

CRACK CHASER, CONTINUOUS DIAMOND BLADE 4”x10mmCRC410

CRACK CHASER, SEGMENTED DIAMOND BLADE 4”x7/8”CRC478

CRACK CHASER, SEGMENTED DIAMOND BLADE 7”x7/8”CRC778

TUCK POINTING, PREMIUM DIAMOND BLADE 4-5/8”x.250”x7/8”ULH40P12

SEGMENTED, PREMIUM DIAMOND BLADE 7”x7/8” Arbor w/ Diamond KnockoutZM80B07

Premium series, high speed segmented blades for block, granite, brick, concrete, stone and pavers, designed for maximum life and speed.

SEGMENTED, PREMIUM DIAMOND BLADE 4”x7/8”ZM80B04

TURBO, PREMIUM DIAMOND BLADE 7”x7/8” Arbor w/ Diamond KnockoutZRT80A07

Premium series made with the highest quality diamond grit and matrix, gives smooth, chip free cuts in concrete and masonry material.

TURBO, PREMIUM DIAMOND BLADE 4”x7/8”ZRT80A04

Diamond Blades from Spec-West Highest quality of professional diamond products in the

industry. Used by the top contractors for a reason. Built for ultimate performance. Knowledgeable sales and customer service reps.


DIAMOND CUP WHEELS

85www.spec-west.com

BLACK ARROW DIAMOND CUP WHEEL 7”x5/8-11ARCW0758

• Aggressive arrow shaped / plow segments are specifically engineered for the removal of Thicker Coatings: Epoxy, Mastic, Urethanes and other membrane materials from

concrete.• High quality diamond content plus taller 10mm segment height

provides longer wheel life.• Large Surface Area Diamond Segments leaves a smooth finish. • Medium 30/40 Grit – Not recommended when coatings or sealers

are going to be applied (i.e. Leaves a very smooth and closed pore finish).

ATOM RED DIAMOND CUP WHEEL 7”x5/8-11ATCW0768

• The wheel to use when you need to remove the high spots – Very aggressive, Extremely Effective on Hard Surfaces.• Wide Open Fan Propellers improves air flow for dust removal with

Dust Control Systems.• Medium Bond – 18/20 Grit, Decent finish for sealer and coating applications.• Smooth Uniform Finish, X-Long Wheel Life.• If the surface is extremely hard and you want faster results – this

is the wheel.

PCD EPOXY REMOVAL DIAMOND CUP WHEEL7”BKPCD1786

• Polycrystalline Diamond (PCD) Cup Wheels – Designed for fast removal of thicker coatings up to 3mm (1/8”) epoxy, paint, glue, acrylics, mastics, adhesives, urethane, elastic coatings,

etc.• PCD Wheels will not load or smear the coating like a traditional diamond cup wheels. Instead the PCD Segment scrapes

or slices beneath the coating leaving uniform swirl marks.• Although they are more expensive than any other types of coatings

removal tools, PCD’s the surest tool available for coatings removal – from soft to extremely hard, thin or thick, adhesives or sealers.

ASTRA, 9 SEGMENTS DIAMOND CUP WHEEL 4”x5/8-11GC4A-5S

ASTRA, 12 SEGMENTS DIAMOND CUP WHEEL 7”x5/8-11GC7A5S

• 2 Wheels in 1: Concrete Grinding + Coatings Removal. • Cuts through a variety of coatings including glue, paints, sealers, etc.• Leaves a rough finish perfect for Surface Preparation / Bonding of

primer or mastic to concrete floor.• General Purpose Grinding and Coatings Removal on a Variety of

Concrete Floors.

DIAMOND CUP WHEELSINGLE ROW 4”x5/8-11GC4S-5A

• Wet or dry applications.• Removing, shaping, and smoothing concrete, masonry and stone

aggregates.• Use single row cup wheels for faster removal of materials, includ-

ing, cured concrete, masonry, brick, block, pavers, green concrete, asphalt and stone.

ECONOMY DIAMOND CUP WHEEL2 ROW7”x5/8-11GC7D5A-ECONO

The ECONO double row cup wheel is used for the removal, shaping, and smoothing of concrete, masonry and stone aggregates. This cup wheel has a high diamond concentration for more surface removal per pass and longer life.

DIAMOND CUP WHEELDOUBLE ROW 4”x5/8-11GC4D-5A

DIAMOND CUP WHEELDOUBLE ROW 7”x5/8-11GC7D5A

• General Purpose Concrete Grinding – Double Row Segments.• Medium Bond – 40 / 50 Grit – Smooth Uniform Finish, extra Long Wheel Life.

DIVISIO

N3 .4

DIAMOND CUP WHEELS

86

TURBO, COURSE DIAMOND CUP WHEEL 4”x5/8-11GC4T-5C

TURBO, FINE DIAMOND CUP WHEEL 4”x5/8-11GC4T-5F

TURBO, MEDIUM DIAMOND CUP WHEEL 4”x5/8-11GC4T-5M

Spec-West Turbo Diamond Cup Wheels are offered in 3 grits to fit your application• Coarse grit for heavy, quick stock removal.• Medium grit for final shaping.• Fine grit for soft material or for getting close to layout lines without fear of chipping the edge.

TURBO, COURSE DIAMOND CUP WHEEL 7”x5/8-11GC7T5C

TURBO, FINE DIAMOND CUP WHEEL 7”x5/8-11GC7T5F

FRACTION - DECIMAL CONVERSIONS

132

764

116

316

532

14

932

1964

732

1564

564

332

18

364

2964

2764

38

2564

12

716

1332

1364

964

2364

1764

164

1132

1164

2164

516

3164

1532

1732

3964

916

1116

2132

34

2532

5164

2332

4764

3764

1932

58

3564

6164

5964

78

5764

1

1516

2932

4564

4164

5564

4964

3364

2732

4364

5364

1316

6364

3132

.015625 .3969

.03125 .7938

.046875 1.1906

.0625 1.5875

.078125 1.9844

.09375 2.3813

.109375 2.7781

.125 3.1750

.140625 3.5719

.15625 3.9688

.171875 4.3656

.1875 4.7625

.203125 5.1594

.21875 5.5563

.234375 5.9531

.250 6.3500

.265625 6.7469

.28125 7.1438

.296875 7.5406

.3125 7.9375

.328125 8.3344

.34375 8.7313

.359375 9.1282

.375 9.5250

.390625 9.9219

.40625 10.3188

.421875 10.7157

.4375 11.1125

.453125 11.5094

.46875 11.9063

.484375 12.3032

.500 12.7001

.515625 13.0969

.53125 13.4938

.546875 13.8907

.5625 14.2876

.578125 14.6844

.59375 15.0813

.609375 15.4782

.625 15.8751

.640625 16.2719

.65625 16.6688

.671875 17.0657

.6875 17.4625

.703125 17.8594

.71875 18.2563

.734375 18.6532

.750 19.0501

.765625 19.4470

.78125 19.8438

.796875 20.2407

.8125 20.6376

.828125 21.0345

.84375 21.4313

.859375 21.8282

.875 22.2251

.890625 22.6220

.90625 23.0188

.921875 23.4157

.9375 23.8126

.953125 24.2095

.96875 24.6063

.984375 25.0032

1.000 25.4001

Inches Millimeters Inches Millimeters Inches Millimeters Inches Millimeters


SAW & GRINDERACCESSORIES

FOR CIRCULAR SAWS

87www.spec-west.com

Perfect when cutting:CONCRETE • FIBERGLASS • WOOD• Made of heavy-duty stainless steel for durability.• Easy to assemble, installs in minutes.• Does not obstruct operator’s view.• Works well with your Blade Roller.

CONTROLS DUST AND INCREASES TOOL LIFE!

Outlet hose port.1-1/2” O.D.

FOR WORM DRIVE SAWS

WATERKIT™#BRWK001

Easy to Assemble, Installs in Minutes!

CollectsUp to 95%of Dust!

STAINLESS STEEL SAW VAC™#SDC714M

“THE ORIGINAL” BLADE ROLLER™#BR70001

FOR GRINDERS

• No tools required.• Non-marking wheels.• Eliminate costly, heavy equipment.

EXCELLENT FOR DECORATIVE CONCRETE!

Will fit the following saws:- Skil® HD77 & HD77 MAG- Skil® HD5860 (8-1/4”)- Makita Hypoid®

- Bosch® 1677M.

Will fit the following grinders:- Metabo® WE9-125Quick- Dewalt® DW402- Ridgid® R1000- Makita® 9527PB- Bosch® 1710- Hitachi® G12SE2- Milwaukee® 6148-6- And many more...

GRINDER CADDY™ BLADE ROLLER™For 4” and 4-1/2” Grinders#BR45003• Installs in seconds.• Great for crack-chasing and tuck pointing.• Adjustable depth of cut.• Non-marking wheels.

Shown with grinder and Diamond blade.

Includes: Ground Fault Circuit Interrupter, Blade Roller ball valve diverter assembly, Quick Release Coupler with 2 Rubber Gaskets, Flexible Plastic Tube, Plastic Nut, Hose Clamps.

• Reduces the operator’s levels of dangerous, cancer causing airborne pathogens, dust and fatigue!• Finger tip controls allow the minimal use of water, to help control the

hazards to the environment created by wet cutting.• Cooling and lubricating with water will make your expensive Diamond blades last up to 50% longer.• Cooling the blade also helps to cool the motor, thus extending the life

of your saw.• Works well with your Blade Roller.

GFCI INCLUDED

DIVISIO

N3 .4

ABRASIVES

METAL Ferrous Metals, Iron, Steel.

88

Depressed Center Grinding WheelsMETALALUMINUM OXIDESILVER LINE™

Part # Specs Grit Max RPM Pcs/BoxDC4510T 4-1/2 x 1/4 x 7/8 A24R 13,300 25DC4510TH 4-1/2 x 1/4 x 5/8-11 A24R 13,300 10DC7020T 7 x 1/4 x 7/8 A24S 8,500 10DC7020TH 7 x 1/4 x 5/8-11 A24S 8,500 10

METAL Ferrous Metals, Iron, Steel, Angle Iron, Rebar, Pipes.

Small Diameter Cut-Off WheelsFor Circular Saws and GrindersMETALALUMINUM OXIDESILVER LINE™

Part # Specs Grit Max RPM Pcs/BoxCW0440T 4 x 1/8 x 5/8 A46T 19,000 25CW071DT 7 x 1/8 x , 5/8 A30R 8,500 25

METAL Ductile Iron, Cast Iron, Hard Metals, Concrete, Coated Steel.

Specialty Cut-Off WheelsFor Chop Saws, Stationary Saws and High-SpeedGas Powered SawsDUCTILE IRON WHEEL• Special mix of grains for cutting a variety of

applications.• Fast cutting and long life.• Consistent density, balance and quality.

Part # Specs Grit Max RPM Pcs/BoxCDC1430 14 x 5/32 x 1* AC30S 5,400 10/30CDC1432 14 x 5/32 x 20mm* AC30S 5,400 10/30

Cut-Off Wheels


Hi-Speed Cut-Off WheelsFor Gas Powered SawsMETALALUMINUM OXIDESILVER LINE™

Part # Specs Grit Max RPM Pcs/BoxCW122GT 12 x 1/8 x 1* A30R 6,300 10/30


METALALUMINUM OXIDEPREMIUM

Part # Specs Grit Max RPM Pcs/BoxCW142G 14 x 1/8 x 1* A36S 5,400 10/30

SLIMCUT™ PLUS Extra Long Life and Cool Aggressive Cutting.

Thin Cut-Off WheelsSLIMCUT™ PLUS ABRASIVE WHEELALUMINUM OXIDE

Part # Specs Grit Max RPM Pcs/BoxDCWPL45A 4-1/2 x .045 x 7/8 A46 13,300 25

XTREME™ PX-4000™ Diamond Tools for Metal Applications Up to 65 Times More Life!

PEARL XTREME™SMALL DIAMETER

Part # Specs Max RPM Pcs/BoxPX4CW07 7 x .060 x 7/8 , 5/8 8,730 1

XTREME™ PX-4000™ Diamond Tools for Metal Applications Up to 65 Times More Life!

PEARL XTREME™LARGE DIAMETER

Part # Specs Max RPM Pcs/BoxPX4CW14 14 x .125 x 1, 20mm 5,500 1

MASONRY Concrete, Stone, Cast Iron and Non-Ferrous Metals.

MASONRYSILICON CARBIDEPREMIUM

Part # Specs Grit Max RPM Pcs/BoxDM4510 4-1/2 x 1/4 x 7/8 C24S 13,300 25DM4510H 4-1/2 x 1/4 x 5/8-11 C24S 13,300 10DM7010 7 x 1/4 x 7/8 C24S 8,500 10DM7010H 7 x 1/4 x 5/8-11 C24S 8,500 10

* Triple Reinforced

If you don’t see the Abrasive Wheel you need, please call Spec-West – (916) 361-1300 .


CLEANERS & STRIPPERS

89www.spec-west.com

700DG Degreaser (Formerly EMERGE™ All Purpose Cleaner)

Take all the guess work out of deciding on the best surface degreaser! Specially formulated to work with all BLUE BEAR products, 700DG is super concentrated and powerful enough to clean the dirtiest, toughest, and grimiest of projects. 700DG is a great product to help you easily finish clean-up after removing mastic, paint, or other coatings and adhesives.Ingredients: Water, Sodium Metasilicate, Surfactants• Helps to easily finish project clean-up.

• Cleaning doesn’t get better than this!• Super concentrated.

600GL Coatings Remover (Formerly SOY•Gel™ Paint and Urethane Remover)

600GL continues to impress contractors with its ease of use and powerful removal properties. With three times the coverage rate of traditional petroleum removers, 600GL effectively removes multiple layers of topical sealers, acrylics, enamels, urethanes, latex, some epoxies, and other single-component coatings. Made with soybeans, 600GL is a safe, low-odor, non-caustic, green coating remover.600GL is 100% biodegradable, practically odorless, and is safe for your hands, your work, and your customers.Ingredients: N-Methyl Pyrrolidone, Dibasic Ester LVP, Soy Ester, Proprietary Thickening and Surfactant Blend

• SAFE! No methylene chloride.• Removes multiple layers with ONE application.• Made with 100% American grown soybeans.

500MR Mastic Remover (Formerly BEAN•e•doo® Mastic Remover)

Ideal for use in occupied areas like post offices, schools, hospitals and other public places where safety is important. 500MR removes newer mastics, layered adhesives and even glues 50+ years old, using the power of soybeans. It’s the first product to pass both performance and environmental safety tests by the USPS for the removal of mastic containing asbestos!Contractors find that 500MR works more efficiently, saves time, and helps create a safer restoration site compared to traditional hazardous chemical mastic removers.Ingredients: Soy Ester, Proprietary Surfactant Blend

• Removes asbestos/black mastic, vinyl glue, ceramic mastic, traditional carpet adhesive.

• Virtually No Odor – Less than 3% VOC!• Cleans up easily with water and/or BLUE BEAR

700DG Degreaser.

760CE Muriatic Acid Replacement (Formerly VeraSafe®)

BLUE BEAR® 760CE is a safe organic replacement for traditional harmful acids, such as Hydrochloric, Sulfuric, and Muriatic acid. It can be used for a multitude of different applications. This revolutionary acid alternative cleans with industrial strength but will not burn your skin. 760CE is non-fuming, environmentally safe, and 100% biodegradable. 760CE will give you excellent performance with none of the hazards of a traditional acid, providing peace of mind, while saving you time and money.For Etching Concrete: Do not dilute. Make sure all coatings are removed and the surface is completely clean and dry before etching. Apply 760CE generously by pouring or spraying, then let dwell for a minimum of 10 minutes. Rinse well with a concentrated water spray. No neutralizing is required.For General Cleaning: Dilute 760CE 1:1 (one part 760CE to one part water). Apply generously to surface and let dwell until desired cleaning occurs. Rinse well with water. No neutralizing is required.Ingredients: Water, Proprietary Organic Salt Blend

DIVISIO

N3 .4

ASPHALT REPAIR

90

The Future of Asphalt RepairWhy use AQUAPHALT™ ?

• Extremely easy to apply.• Permanently hardens in minutes instead of days.• Engineered to be supremely tough and durable.• Usable in any weather.• Bonds with the surface to create a genuine repair, not just a temporary fix.• The only truly green and non-toxic product available.• Comes in three grades for precision repair.

Product # DescriptionM1155P4 4mm – cracks and less than 1-inch repairsM1155P6 6mm – 1- to 3-inch repairsM1155P9 9mm – deep holes and as base repairs

Simply the best cold patch you can buy .


RESURFACING

Concrete Polymer – LiquidPolymer Concrete is ideal for thin section patching, leveling, re-pitching and resurfacing applications from zero up to two inches thick. It is used for 1/4” – 1/2” thick Stamped Concrete applications over existing surfaces to provide decorative patterns and textures. It can be applied less than 1/16” thick by a special metal edge squeegee or hand trowel to provide a smooth finish or by a broom or hopper gun sprayer to provide textured finishes from 1/16” – 1/8” thick. It is most commonly used on driveways, patios, pool decks, garage floors, sidewalks, parking garages, warehouse floors, steps, walls, interior floors of hotels, casinos, stores, restaurants and other businesses. It can also be used as an underlayment to level uneven floors for tile and other types of flooring.Features• Restores existing surfaces.• Exceptional bondability. / Very durable.• Improves performance properties of mortar mixes.• Can be applied in a variety of textures, colors and patterns.• Excellent for acid stains and/or dyes. Fast cure time.• With Concrete Polymer added, cement mixes do not require a curing

agent.• Can be applied by trowel, rubber or metal squeegee, broom, brush,

screed rod, hopper gun sprayer or gauge rake and fresno for 1/4” Stamping applications.

91www.spec-west.com

DIVISIO

N3 .5Tilt-Up & Precast Concrete


Tilt-Up Lifting System

Coil-Anchor Bolts

Tilt-Up Wall Braces

Tilt-Up Forming System

Chamfer Cutters

LIFTING AND BRACING

92

T110 Superior Lift SystemThe Dayton Superior T110 Superior Lift Insert consists of a forged foot anchor, 4-leg wire base and plastic void former. The insert is positioned with the void direction toward the top of the panel and then is tied in place to the rebar cage. The T120 Superior Lifting Hardware allows quick attachment to the insert and remote ground release after panel has been erected and braced. The T110 Superior Lift Inserts are shipped assembled, ready to go and are sized 1/8” less than the panel thickness.

Structural Panel Thickness Face Tension 2:1 SF Face Shear 2:1 SF Anchor Length 5” 11,600 lbs. 12,400 lbs. 3.625” 5.5” 13,000 lbs. 13,400 lbs. 4.125” 6” 14,300 lbs. 14,400 lbs. 4.625” 6.5” 15,700 lbs. 15,300 lbs. 5.125” 7” 17,000 lbs. 16,200 lbs. 5.625” 7.25” 17,700 lbs. 16,700 lbs. 5.875” 7.5” 18,400 lbs. 17,100 lbs. 6.125” 8” 20,200 lbs. 18,100 lbs. 6.625” 8.5” 21,600 lbs. 19,200 lbs. 7.125” 9” 23,000 lbs. 20,400 lbs. 7.625” 9.25” 23,700 lbs. 20,900 lbs. 7.875” 9.5” 24,000 lbs. 21,500 lbs. 7.875” 10” 24,000 lbs. 22,900 lbs. 7.875” 10.5” 24,000 lbs. 22,950 lbs. 7.875” 11” 24,000 lbs. 23,000 lbs. 7.875” 11.25” 24,000 lbs. 23,400 lbs. 7.875” 11.5” 24,000 lbs. 23,800 lbs. 7.875” 12” 24,000 lbs. 24,000 lbs. 7.875”

To Order:Specify: (1) quantity, (2) name, (3) panel thickness, (4) bottom face aggregate or formliner thickness.Example:150. T110 Superior lift inserts, 9” panel with 1/2” formliner panel

SWL provides approximate safety factor shown with minimum 2500 psi normal weight concrete.

T110 Superior Lift System

T13 Coil-AnchorThe Dayton Superior T13 Coil-Anchor is a drill-in expansion anchor designed for use in the floor slabs of tilt-up buildings to attach and anchor wall braces. Each T13 plug includes the bolt, one cut washer and one tang. Available in 3/4” diameter x 4-1/2” or 6” lengths as specified.

T13 Coil-Anchor

Coil-Anchor Bolt

Washer

4 Turn TangU.S. Patent

No. 5,006,023 Code Packaging 49206 3/4” Nom Dia. x 4-1/2” T13 Coil-Anchor Set 123045 3/4” Nom Dia. x 6” T13 Coil-Anchor Set 125717 3/4” Nom Dia. - Extra Tangs 123566 Thread Gauge

Features:• Tapered threads• Reusable• Each set includes one coil-anchor bolt, one cut washer and one tang.

Installation:1. Drill a 3/4” diameter hole perpendicular to the floor surface with a new carbide tipped drill. Depth of the hole must be a minimum 4”. Holes drilled through slabs that are 5” or greater are acceptable. Do not use core bits for T13 anchor holes. Minimum compressive strength of the concrete must be 2,500 psi prior to installation of T13 anchors. Minimum edge distance for the T13 anchor is 12”.WARNING: Do not use T13 (4-1/2”) anchors in slabs less than 5” thick. The insufficient embedment depth will not allow required load capacity.Caution must be used when drilling through slabs less than 5” thick so that there is no blowout at the bottom of the hole. Tang may not fully engage, greatly reducing SWL; or tang may not engage at all, making the hole unusable.2. Thoroughly clean the drilled hole with compressed air.3. Thread the tang onto the T13 bolt. Finger tight is sufficient, no more than 1-1/2 turns.CAUTION: Do not attempt to pre-expand the tang. For proper load capacity, the tang must not be installed over 1-1/2 turns on the bolt.WARNING: Do not attempt to use a standard coil bolt with the T13 Coil-Anchor Tang. The Coil-Bolt Anchor Bolt is a tapered bolt and is not interchangeable with standardcoil bolts.4. T13G Thread Gauge - NOTE: T13G Thread Gauges are recommended to check T13 bolt thread wear when reusing T13 Coil-Anchor Bolts.

5. Insert the T13 anchor through the foot plate of the wall brace and into the properly drilled hole. Drive the bolt down until the cut washer rests on the foot plate.6. Tighten the T13 anchor with a 3/4” impact wrench, then use a torque wrench to insure correct tightness. Refer to the chart for proper torquing values.WARNING: If wind loads over 35 miles per hour are experienced on the job site, all T13 anchors should be checked with a torque wrench to verify proper torque values are maintained.7. The tension safe working load (SWL) per T13 Coil-Anchor is shown below:Floor Slab Thickness - 5” or thickerSWL Tension per Anchor - 7,500 lbs.Minimum Torque per Anchor - 200 ft. lbs.NOTES: Safe working loads are based on an approximate factor of safety of 2:1. This assumes a minimum slab compressive strength of 2,500 psi and a properly installedT13 anchor as detailed above.WARNING: When using T13 Coil-Anchor bolts, always clean and lubricate the bolt with T13L Set-Eez. Failure to do so will result in bolt wear, lower than expected loadcapacity and possible premature failure.

Available exclusively throughDayton Tilt-Up 3 Dealers


BRACING INFORMATION

93www.spec-west.com

T14 Tilt-Up Wall BracesThe T14 Tilt-Up Wall Braces are all steel, heavy duty wall braces designed to quickly and easily align and brace tilt-up wall panels. Rough adjustment of the T14 braces is easily accomplished by telescoping the pipes to the nearest incremental hole. Final adjustment is then achieved by simply turning the brace. Dayton Superior wall braces are available in numerous sizes to provide a continuous range of tilt-up panel heights of fifty feet or more. Refer to the chart below for additional information.

T66 Tilt Bracket™Tilt-Up Forming SystemThe Tilt Bracket Forming System consists of lightweight, reusable plastic brackets and an adhesive backed shoe plate. The bracket snaps into the shoe plate that is held firmly to the casting slab by the adhesive base.Brackets come in two sizes 5” for form height 5” to 7” and 7” for form height 7” to 11”. Maximum recommended spacing is 18”.

Min. and Max. Brace Type Description Brace Length Weight B1A Short Pipe Brace 8’-0” to 14’-0” 87 B4 Heavy Duty Regular Pipe Brace 14’-6” to 23’-6” 130 B5 Heavy Duty Long Pipe Brace 22’-6” to 39’-0” 208 B7 Short Jumbo Brace 17’-0” Fixed Length 107 B8 Jumbo Brace 22’-0” Fixed Length 130 B9 Jumbo Brace with 51-0” Extension 27’-0” Fixed Length 172 B10 Jumbo Brace with 10’-0” Extension 32’-0” Fixed Length 193 B11 Tru-Itt Brace 25’-6” to 40’-0” 505 B12/B12A Jumbo 5-1/2” 32’-0” Fixed Length 245 B14* B12/B12A Jumbo Brace, 10’-0” Extension 42’-0” Fixed Length 382 B15* B12/B12A Jumbo Brace, 20’-0” Extension 52’-0” Fixed Length 410 B16 B12/B12A Jumbo Brace, 5’-0” Extension 37’-0” Fixed Length 360 B18 Super Brace 52’-0” Fixed Length 984

To Order:Specify: (1) quantity, (2) name, (3) model.Example:200, T14 Tilt-Up Wall Braces, Model B8.

To Order:Specify: (1) quantity, (2) name, (3) size.Example:400, T66 Tilt Brackets, 7” size.

T14 Tilt-Up Pipe Brace T14 Tilt-Up Jumbo Brace

T66 Tilt Bracket 90° Application Battered Application

Fixed Length Pipe

Ball Bearing Coupler

Danger! To prevent accidental removal ofalignment pin, insert a 10d double headed nail through hole in alignment pin, bending the protruding portion of the nail to a 45degree minimum angle.

Telescoping Pipes

Foot Plate Foot Plate

Adjusting ScrewAdjusting Screw

Ball Bearing Coupler

Wall PlateWall Plate

Notes: * Field assembly is required for B14 & B15 braces. Fixed length allows for +/-9” of adjustment. B11 Brace available West Coast only. Pipe Extensions: T15 for the B8 model and T20 for the B12 model.

Shoe Plate

Casting SlabCasting SlabAdhesive

Form Form

Spacer

T66 TiltBracket

T66 TiltBracket

DIVISIO

N3 .5

CHAMFER CUTTERS

94

QUALITY SERVICE RELIABILITY

Easy to UseDurableSafeAccurate

Looking for an easy, economical and accurate way to cut chamfer? Look no further, these chamfer cutters are just what any tradesman needs. No need to carry around a saw when these handy, lightweight cutters will fit in any bag. They are manufactured for Loveday Lumber from the highest quality stainless steel. The backstop and markings on the anvil assure accurate angle cuts. Both the blade and the anvil can be replaced so you don’t have to buy a new tool.

Stock Shapes & Sizes

1/2” 5/8”3/4” 1”1-1/2”

1/2”5/8”3/4”1”

1/4” x 3/4” x 1/2”3/8” x 3/4” x 5/8”3/8” x 3/4” x 3/4”5/8” x 3/4” x 3/4”1” x 3/4” x 1-1/2”1” x 3/4” x 2-1/2”1-1/2” x 3/4” x 3”

3/4” x 1” x 1”1/2” x 1” x 1”3/8” x 1/2” x 1/2”1/2” x 1/2” x 5/8”5/8” x 1/2” x 1”1/4” x 1/4” x 1/2”

1/2”3/4”1”1-1/2”

1/2”5/8”3/4”1”

1/2” x 5/8”5/8” x 3/4”3/4” x 7/8”1” x 1-1/8”

Chamfer Half Round S4S Cove Quarter Round Rustification

We manufacture chamfer strips in just about any size you could possibly need, as well as a number of different materials.


95www.spec-west.com

DIVISIO

N3 .6Decorative Concrete


®

Release Agent

Concrete Stamps

Color Hardener

Antique Release

Integral Concrete Color

Concrete Stain

Stampable Overlay

Surface Deactivator

Finishing & Polishing

Efflorescence Remover

Strippers

Overlayments

Waterproof & Epoxy Coatings

Countertops

Pavers & Stones

Surface Protection

Dust Containment

Cleaners & Sealers

Curing Compounds

Slip Resistant Additive

CONCRETE SEALERS

96

SPEC-SEAL High Gloss, Low VOC, Wet Look Sealer

Description:SPEC-SEAL LOW VOC HG is a solvent based, high gloss, crystal clear, deep penetrating barrier coating for decorative concrete. SPEC-SEAL LOW VOC HG provides a “water-wet” appearance which enhances and beautifies the natural color of the applied masonry surface. Non yellowing formula seals against food stains, gasoline, grease, oils, water and acid. Its deep bonding abilities resist peeling, chipping, cracking and UV degradation. Made from the latest developments in VOC compliant high solids acrylic chemistry, SPEC-SEAL LOW VOC HG delivers excellent resistance to the formation of efflorescence. When used on newly placed concrete, the sealer can help protect against spalling, dusting, freeze-thaw damage and alkali degradation. SPEC-SEAL LOW VOC HG remains hard even under extreme sunlight and delivers superior wear resistance. Its VOC compliant formula works great indoors and outdoors to provide a breathable barrier that allows moisture to escape from coated surfaces.

Features: • Air Quality Compliant, VOC Content <100g/l• Use Indoors or Outdoors • Non-Yellowing, UV Resistant • Fast Drying and Long Lasting • Easy to Apply by Brush, Roller or Spray • Helps Retard Efflorescence • Resistant to Oil and Grease Stains • Excellent Adhesion • Water Repellent • Re-Coatable.

SSVOCHG1 1 Gallon CanSSVOCHG5 5 Gallon Can

SPEC-SEAL Low Sheen, Low VOC, Wet Look Sealer

Description:SPEC-SEAL LOW VOC LS is a solvent based, low sheen, crystal clear, deep penetrating barrier coating for decorative concrete. SPEC-SEAL LOW VOC LS provides a “damp-wet” appearance which enhances and beautifies the natural color of the applied masonry surface. Non yellowing formula seals against food stains, gasoline, grease, oils, water and acid. Its deep bonding abilities resist peeling, chipping, cracking and UV degradation. Made from the latest developments in VOC compliant high solids acrylic chemistry, SPEC-SEAL LOW VOC LS delivers excellent resistance to the formation of efflorescence. When used on newly placed concrete, the sealer can help protect against spalling, dusting, freeze-thaw damage and alkali degradation. SPEC-SEAL LOW VOC LS remains hard even under extreme sunlight and delivers superior wear resistance. Its VOC compliant formula works great indoors and outdoors to provide a breathable barrier that allows moisture to escape from coated surfaces.

Features: • Air Quality Compliant, VOC Content <100g/l• Use Indoors or Outdoors • Non-Yellowing, UV Resistant • Fast Drying and Long Lasting • Easy to Apply by Brush, Roller or Spray • Helps Retard Efflorescence • Resistant to Oil and Grease Stains • Excellent Adhesion • Water Repellent • Re-Coatable.

SSVOCLS1 1 Gallon CanSSVOCLS5 5 Gallon Can


CONCRETE SEALERS

97www.spec-west.com

SPEC-SEAL High Gloss, Wet Look Sealer

Description:SPEC-SEAL HG is a solvent based, crystal clear, high gloss protective coating designed exclusively for decorative concrete. SPEC-SEAL HG’s superior advanced penetrating formula provides a deep “water wet” appearance which enhances the natural colors of the applied surface. SPEC-SEAL HG’s non-yellowing barrier coating resists food stains, gasoline, grease, oils, acids and water. The deep bonding formula resists peeling, chipping, cracking and UV degrada-tion. Resulting from the latest developments in VOC compliant high solids acrylic chemistry, SPEC-SEAL HG delivers superior wear resistance and helps retard the formation of efflorescence. SPEC-SEAL HG works great indoors or outdoors and is ideal as a joint sand stabilizer for interlocking pavers.

Features: • Use Indoors or Outdoors • Non-Yellowing, UV Resistant • Fast Drying and Long Lasting • Easy to Apply by Brush, Roller or Spray • Helps Retard Efflorescence • Resistant to Oil and Grease Stains • Excellent Adhesion • Water Repellent • Re-Coatable.

SSHGWL1 1 Gallon CanSSHGWL5 5 Gallon Can

SPEC-SEAL Low Sheen, Wet Look Sealer

Description:SPEC-SEAL LS is a solvent based, crystal clear,low sheen protective coating designed exclusively for decorative concrete. SPEC-SEAL LS’s superior advanced penetrating formula provides a soft “damp-wet” appearance which enhances the natural colors of the applied surface. SPEC-SEAL LS’s non-yellowing barrier coating resists food stains, gasoline, grease, oils, acids and water. The deep bonding formula resists peeling, chipping, cracking and UV degradation. Resulting from the latest developments in VOC compliant high solids acrylic chemistry, SPEC-SEAL LS delivers superior wear resistance and helps retard the formation of efflorescence. SPEC-SEAL LS works great indoors or outdoors and is ideal as a joint sand stabilizer for interlocking pavers.

Features: • Use Indoors or Outdoors • Non-Yellowing, UV Resistant • Fast Drying and Long Lasting • Easy to Apply by Brush, Roller or Spray • Helps Retard Efflorescence • Resistant to Oil and Grease Stains • Excellent Adhesion • Water Repellent • Re-Coatable.

SSLSWL1 1 Gallon CanSSLSWL5 5 Gallon Can

DIVISIO

N3 .6

CONCRETE SEALERS /SEALER PROTECTOR

98

SPEC-SEAL Water Based, Satin Seal

Description:SPEC-SEAL WB is a water-based acrylic sealer. SPEC-SEAL WB is designed for use over decora-tive concrete, properly prepared concrete floors, pool decks and other new or old concrete and masonry surfaces. SPEC-SEAL WB is breathable, will not blush or yellow and dries quickly to a satin appearance. It has good chemical resistance, hot tire pickup resis-tance and will resist discoloration from dirt and spills. SEC-SEAL WB protects substrates treated with water-based or acid stains.

Features: • Use Indoors or Outdoors • Non-Yellowing, UV Resistant • Hot Tire Pickup Resistant• Easy Application and Cleanup • Alkaline and Efflorescence

Resistant• Resistant to Oil & Grease Stains • Excellent Adhesion • Good Early Water Resistant• Meets or Exceeds Environmental

Regulations.

SSWB1 1 Gal BottleSSWB5 5 Gal Pail

BOB Water Urethane/Acrylic Sealer

Description:BOB offers the “Best Of Both” by combining the hardness of a urethane along with the tenacious bond of an acrylic in a single component decorative concrete sealer. BOB was created for sur-faces that require a higher-end, yet cost effective finish that holds up very well to traffic such as retail stores, restaurant floors, industrial floors, garages, etc. It has strong abrasion and chemical resistance, excellent hot tire pickup resistance and will resist discoloration from dirt and most common spills. BOB is easy to apply and cures to a clear, non-blushing, non-yellowing glossy film.

Features: • Very Strong Durability• Hot Tire Pickup Resistant• Excellent Adhesion • Resistant to Oil & Grease Stains • Use Indoors or Outdoors • Non-Yellowing, UV Resistant • Easy Application and Cleanup • Blush and Water Resistant• Meets or Exceeds Environmental

Regulations.

BOB1 1 Gal BottleBOB5 5 Gal Pail

SPEC-COAT

Description:SPEC-COAT is a sacrificial coating designed to protect the interior floor sealer and floor substrate from wear. SPEC-COAT provides stunning highlights to colored, stained or stamped concrete floors while offering excellent slip resis-tance. The high solids formulation provides maximum scuff and heel mark resistance in high traffic areas. SPEC-COAT requires fewer coats than are needed with con-ventional lower solids products and stays glossy even after numerous cleanings.

Features: • Easily Applied, Fast Drying, Long Lasting • High Solids, High Gloss • Buffable, Wet or Dry • Heel Mark Resistant • Slip and Scuff Resistant • Non-Yellowing.

SC1 1 Gal BottleSC5 5 Gal Pail


SLIP RESISTANT ADDITIVE /CLEANERS / RELEASE AGENT

99www.spec-west.com

SPEC-WEST’S Bubblegum Liquid Release Description:Spec-West’s Bubblegum Liquid Release is a colorless release agent designed to keep texturing mats from sticking to plastic concrete or polymer modified overlays. Bubblegum Liquid Release forms a lubricating barrier that prolongs the life of texturing mats by decreasing the friction between the texturing mat and the surface. Liquid Release is used in the texturing process of both colored and uncolored concrete. It is also used as an alternative to powdered release agents that may not be desired in certain circumstances, such as interior projects or

polymer modified overlays. Bubblegum Release should be considered for use on projects that are to be textured but colored later. It also requires minimal cleanup and its bubblegum scent makes it easy to use for both indoor and outdoor applications.

Features: • Pleasant Bubblegum Scent• Easy-To-Apply Liquid • Prolongs Tool Life• Interior/Exterior Use.BUBBLEGUM1 1 Gal CanBUBBLEGUM5 5 Gal Pail

SPEC-GRIP Description:SPEC-GRIP is a micronized polymer additive that imparts slip resistance when used in any film forming sealer. It is perfect for use on walkways, pool decks, entry ways, driveways, garage floors and patios. SPEC-GRIP’s low density allows it to stay in suspension in the thinnest of sealers without settling. Surfaces treated with SPEC-

EFFLORESCENCE REMOVER is used to remove these deposits. Efflorescence Remover is a water soluble biodegradable blend of non-toxic acids and surfactants and is a safer alternative to highly reactive muriatic acid. It is also effective for removing hard water stains, mild rust stains, lime deposits and mortar residue. SPEC-WEST EFFLORESCENCE REMOVER prepares surfaces for the application of one of Spec-West’s sealers. SWER1 1 Gal Bottle

EFFLORESCENCE REMOVER Description:Efflorescence is a white crystalline deposit that is composed of water soluble mineral salts. The minerals travel to the surface, carried by water as it migrates through cementitious substrates by a process called capillary action. Once the solution of water and minerals arrives at the surface, the water evaporates leaving behind the minerals known as efflorescence. These minerals are found most often on concrete, brick, mortar and Mexican Saltillo tile. SPEC-WEST

SPEC-WESTAcid/Stain Neutralizer Description:SPEC-WEST ACID/STAIN NEUTRALIZER is a neutralizing rinse that restores the pH balance on all hardscape surfaces and is mandatory prior to sealing whenever any acid cleaning, etching or staining has taken place. This will

up to 10 parts water. Dilution rate with water determines cleaning power.Features: • Interior and Exterior Use• Water Based Safe • Very Effective on Oil and Grease• Concentrated • Biodegradable.SPECLEAN1 1 Gal BottleSPECLEAN5 5 Gal Pail

SPEC-CLEANDescription:SPEC-CLEAN is a complete heavy-duty concrete and masonry cleaner, designed specifically to clean dirt, grime, food, beverage and oil stains from decorative concrete, interlocking concrete paving stones, brick, clay tile and most other surfaces. It is an easy to use, safe, biodegradable cleaner that does not form noxious fumes or damage lawns or flower beds. It is concentrated and can be diluted with

GRIP are more comfortable to walk on barefoot than surfaces treated with sand or aggregate additives. SPEC-GRIP will not dissolve in solvents, absorb oil or expand in water.SG16* For 1 Gal Can ContainerSG32* For 5 Gal Can Container*Add the entire contents of the package to the appropriate size container of sealer or coating.

ensure proper sealer adhesion.Features: • Non-Toxic and Environmentally Safe • Safe for Colored and Stamped Concrete • Prevents Sealer Failure Due to Acid Staining.SWAN (Add 12 oz. package to 5 gallons water.)

DIVISION3.6

CONCRETE STAMPS

100

Engineered Texturing SystemsBrickform, the leader in Decorative Concrete, is proud to offer the largest selection of texture patterns with the highest degree of quality and precision. Our large selection of unique patterns and designs give the Architect and the Homeowner the options they need to create something truly special. The precision design, durability, and easy use give Contractors the tools they need to make those visions into realities.

Spec-West is the Nation’s Leading Suppliers of Brickform Stamps and Skins.

Texture MatsSeamless Skins

FM-H Roman Slate Texture A slate stone surface that utilizes dips, ridges and veins to create a continuously changing texture across the entire surface.Size: Various

FM-C Rough Stone TextureA natural stone texture characterized by a continuous coarse surface with several distinguishing veins.Size: Various

FM-3125-S/O Ashlar Cut Slate - StandardNaturally laminated stone textures, hand tooled.EF-3125-S/O*Size: 23.125” x 23.125” (58.74 x 58.74cm)

FM-650-S/O European FanAn elegant European fan pattern, consisting of slightly curved rectangular slate stones.EF-650-S/O*Size: 26” x 46” (66.04 x 116.84cm)

FM-8700-S/O Classic WoodCombining multiple wood grains to offer a bold, pronounced, exposed grain texture with six-inch wide planks.Size: 81.5” x 21.75” (207 x 55.2cm)

FM-700-S/O Random StoneHeavily textured random fieldstones. EF-700-S/O*Size: 29.125” x 29.125” (73.97 x 73.97cm)

FM-5000-S/O Harringbone Used BrickA weatherworn brick surface with an uneven tex-ture and rounded broken edges. EF-5000-S/O*Size: 32” x 36” (81.28 x 91.44cm)

FM-1350 English Field StoneA natural arrangement of river rock, emulating the look of smooth English fieldstones.Size: 18” x 39.75” (45.72 x 100.965cm)

FM-540-S/O London Cobble - StandardA staggered pattern of cobblestone with smooth joints and rounded edges. EF-540-S/O*Size: 17” x 29.75” (43.18 x 75.56cm)

*Contractors Choice is a professional line of tools that are tough, slim, sleek and firm, for a great feel on and off the slab. These new tools are both economically and ecologically friendly, emphasizing quality and dependability.Designed with a keen eye to the feedback and desires of end-users, Contractor’s Choice Mats are a contractor’s best friend.


CONCRETE STAMPS

S E A M L E S S T E X T U R I N G S K I N SThere are dozens of Seamless Texture options to choose from.

101www.spec-west.com

A S H L A R R O T A T I N G M A T SRotating mats for the Ashlar pattern have been designed to givea highly random pattern and realistic design with a simple rotational change. Modeled from real stone, the resulting surface is a beautiful rendition of slate and stone in three textures. Tight tolerances between mats result in less detail work and to speed up installation, each mat is marked on the back for rotation.

• Large skins have four handles, and are approximately 58” x 58”• Medium skins have four handles and are approximately 46” x 46”• Small skins have two handles, and are approximately 34” x 34”• Touch-up skins do not have handles, are approximately 20” x 20”

7

7

7

7

7

8 8

8

7

888

7

ROMAN SLATEITALIAN SLATECONNORS QUARRY STONE

OLD GRANITE

TRAVERTINE

SANDSTONE COARSE

SANDSTONE LIGHT

FLAMED GRANITE

COQUINA STONE

QUARTZITE

COQUINA W/SEA SHELLS

BLUE STONE

BELGIUM SLATE

19

ROMAN SLATE

19

ITALIAN SLATE19

ENGLISH ASHLAR

ARIZONA FLAGSTONE

R A N D O M S T O N E

24

BELGIUM SLATE


24

CASTLE STONE


24

STANDSTONE

(SMALL)

SANTA FE STONE

YUKON FLAT

YOSEMITE STONE FLAT

DENALI HAMMERED EDGE

ROMAN SLATE HAMMERED EDGE

ROMAN SLATE BULLNOSE

35

YUKON FLAT

YUKON FLAT

YOSEMITE STONE FLAT




35

YOSEMITE STONE FLAT

YUKON FLAT

YOSEMITE STONE FLAT




35


YUKON FLAT

YOSEMITE STONE FLAT




35


YUKON FLAT

YOSEMITE STONE FLAT




35


BULLNOSE

DENALI FLAT

HAMMERED EDGE

ROMAN SLATE FLAT

R A N D O M S T O N EThe Random Stone Stamps are either single or multiple part units that beautifully reproduce hand cut and placed stone, sandstone, granite and flagstone. The Arizona Flagstone has wide irregular grout lines and occasional smaller pieces that actually make it hard to tell it from the real thing. Santa Fe Stone comes in three stone sizes on two mats each, so up to all six mats can be used to form a multi-size, fully random or graduated stone sized surface.

(MEDIUM) (LARGE)

P R O L I N E T A M P E R SSHOCK-ABSORBING• Extra long grip.• Composite handle.• Shock absorbing, flexible coupling.• Self aligning base.• Removable locking pin.• Rounded corners and edges.12TAM - 12” x 12” 16TAM - 16” x 16”

WHE - Hammered Edge WV - V-Groove

E D G E L I N E R SProline’s Edgeliners are flexible, reusable liners to transfer a texture to edges, corners, risers of cast in place steps, countertops, pool copings and wall caps.

T O U C H - U P W H E E L S

DIVISIO

N3 .6

COLOR HARDENER /ANTIQUE RELEASE

102

COLOR HARDENERBRICKFORM Color Hardener is manufactured with the finest UV-resistant pigments and premium aggregates. BRICKFORM Color Hardener is designed to work with imprinting tools to produce clear, sharp impressions that enhance the finished appearance of any hardscape. When properly applied and troweled into newly placed, fresh concrete, it forms a colored concrete surface that is resistant to weathering, wear and normal abrasion.

• Non-fading.• Denser, more durable surface.• Improves abrasion resistance.• Can be antiqued and stained.• 40 Standard colors.• Custom colors available.• Compatible with Stampable Overlay OL-60.

LIMITATIONS – BRICKFORM Color Hardener is for use only with freshly poured, still-plastic, concrete surfaces.COLORS – BRICKFORM Color Hardener is available in 40 standard colors (see next page). Custom colors and color matching are also available.PACKAGING – BRICKFORM Color Hardener is packaged in convenient 60-pound, moisture-resistant pails. This type of packaging gives the material a shelf life of at least one-year, double the life of bagged color hardeners.

ANTIQUE RELEASEBRICKFORM Antique Release imparts a second color while serving as a bond breaker for stamping. It is made from a finely ground formula that creates beautifully antiqued and textured concrete surfaces. Antique Release is available in 40 standard colors to match or contrast with BRICKFORM Color Hardener. Custom colors and color matching are also available.

• Richly pigmented colors.• UV-resistant.• Use to antique, marbleize and faux paint.• Suitable for all cementitious surfaces.

LIMITATIONS – BRICKFORM Antique Release should not be used as the primary coloring agent. It should be applied over freshly placed, still plastic, color-hardened or integrally colored concrete surfaces.COLORS – BRICKFORM Antique Release is available in 40 standard colors (see next page) to match or contrast with BRICKFORM Color Hardener. Custom colors and color matching are also available.PACKAGING – BRICKFORM Antique Release is packaged in convenient30-pound (13.5kg), moisture-resistant, plastic pails.

ANTIQUE-ITBRICKFORM Antique-It is a water soluble antiquing agent designed to impart a secondary color or highlight over stamped concrete or textured overlays. Antique-It is easy to apply, dries fast and provides a durable color that closely resembles the look of release powder.

LIMITATIONS – When applying to existing concrete, the surface must be properly profiled. COLORS – BRICKFORM Antique-It is available in all 40 standard colors (see next page).PACKAGING – BRICKFORM Antique-It comes in powder form and is packaged in a one gallon bucket.


COLOR CHART


BRICKFORM STANDARD COLORS

115 Venetian Pink

1015 Blush Beige

330 Coconut

1065 Quarry Red

375 Buff Tan

735 Capuccino

500 Tile Red

525 Dusty Rose

310 Cream Beige

550 Brick Red

810 Walnut

1055 Pecos Sand

575 Victorian Red

400 Chestnut

1020 Antique Rose 1050 Antique Cork 515 Sunbaked Clay 425 Autumn Brown700 Terra Cotta

1035 Summer Beige

The Brickform 40 Standard Colors are available in Color Hardener, Antique Release, Antique-It, Cem-Coat, FreestylePro, Overlay Liquid Colorant, and Tinta’ Seal. Disclaimer: This color chart should be used as a general guide, not a definitive indicator of final color. Shades and hues can vary depending on screen settings. When planning a project, consult a physi-cal color card for a better indication of potential color. Create a representative mockup before any project to better account for the effects of conditions, material, and techniques that may alter the final appearance or color.

1040 Weathered Sage

625 Dover Blue

320 Golden Sandstone

1045 Shadow Slate

615 Stone Gray

1080 Adobe Buff

815 French Gray

600 Light Gray

1070 Sandy Buff

650 Smokey Blue

100 Dark Gray

350 Desert Tan

825 Slate Green

200 Medium Gray

1030 Ash White 250 Oyster White 1090 Sun Buff 300 Nutmeg1010 Smokey Beige

325 Sandstone DIVISIO

N3 .6

COLOR PRODUCTS

D U R A C O L O R H A R D E N E R ( C H )Dry-shake Color Hardeners come as powders that are hand broadcast onto the freshly placed concrete and thenworked into the surface with a float or trowel. Proline’s Dura Color Hardener is a uniform, streak-free concrete color hardener that’s durable enough for high traffic areas. In addition to adding color to concrete, it makes a great base for stamped concrete. Also available in Bags.

104

D U R A A N T I Q U E R E L E A S E ( A R)Dura Color Antique Release is a colored powdered release agent that will provide a contrasting effect on any stamped concrete. Combined with more than one color or alone, this product adds depth and dimension for a true natural look. Also available in Box or 1 Gallon Bucket.

E Z - T I Q U E A N T I Q U I N G W A S HEZ-Tique can be easily applied and holds fast to textured concrete. Each 3 lb. bucket covers up to 3,000 sq. ft. of freshly textured concrete or use to revitalize an older textured surface.

The colors shown are approximate, and as close as possible, to represent concrete with flat trowel finish and sealed with Dura Seal HG Sealer. Proline Dura Products is not responsible for application methods, finishing techniques, jobsite conditions, curing methods, and other conditions and therefore cannot guarantee an exact match. Various texturing and finishing techniques such as troweling or brooming, the use of sealers, and color variations in raw materials can produce variations in colors. Proline Dura Products highly recommends a representative job sample be done for each product.

P R O L I N E D U R A C O L O R S

Oceanside (612) Navajo (606) Suede (608) Espresso (622) Mojave (605) Soft Gray (613) Sage (607) Sand Canyon (603)

El Paso (625) Mocha (610) Rock Gray (614) Asheville Slate (647) Sycamore (604) Pecan (643) Walnut (641) Midnight Gray (615)

Santa Fe (609) Jade (618) Terra Cotta (629) Java (635) Adobe Beige (602) Cream Buff (601) Arizona Buff (623) Coconut Cream (621)

Mission Beige (631) Beige Cream (650) Summer Sand (645) Light Copper (642) Cheyenne (624) Kiln Red (637) Saddle Soap (632) Avalon (646)

Georgia Clay (628) Rosewood (633) Red Brick (640) Bonsall Beige (627) Buckwheat (644) Saltillo Tile (649) Pueblo (630) Tile Red (638)

*Also available in WHITE (800) and BLACK (700)


INTEGRAL COLOR CHART


SGE INTEGRAL COLORS – Dry Pigment Ready Mix

These color chips represent shades of Integral Colors based on medium tone gray Type I-II Portland cement with 4” slump. Use this chart as a guideline only. The colors may not exactly represent the final color. Shade variations of cement and aggregate plus variations in the volume of water, the addition of admixtures and other additives may have an effect on the design mix and final color. We recommend that a test slab be poured and approved prior to the start of the job.

413 Colony Red 413 Clay 413 Terra Cotta 306 Toffee 306 Cinnamon306 Canvas

417 Rose 417 Brick Red 417 Apple Red 238 Doeskin 238 Marigold238 Tyme

489 Dusty Rose 489 Light Plum 489 Dark Redwood 338 Rawhide 338 Leather338 Earthen

288 Rosemary 288 Ginger 288 Straw 385 Lava 385 Bark385 Taupe

750 Desert Tan 750 Salmon 750 Peach 242 Sahara 242 Nutmeg242 Sandstone

366 Blush 366 Dk. Blush 366 Natural Red 5092 Sage 5092 Avocado5092 Olive

775 Sand 775 Cedar 775 Sedona 920 Smoke 920 Onyx920 Slate

755 Trail Dust 755 Driftwood 755 Apricot

*908 Asphalt *908 Ultra Black*908 Lunar Eclipse

1 - 25 lb . bagper 4 yd . / 1 .04 lb . sack


1 - 25 lb bagper 1 yd . / 4 .16 lb . sack




1 - 25 lb . bagper 4 yards



*Caution: 908 Carbon Black can negate the amount of entrained air in the concrete mix.

DIVISIO

N3 .6

4 in 1 OverlaySmith’s 4 In 1 Overlay is a single bag formula dry mix requiring only addition of water to produce a permanent bonding cement overlay for both interior and exterior installations. This unique mix does not require a bond coat, and allows the installer to apply the product as a stamped overlay, spray texture, trowel substrate or vertical surface. Smith’s 4 in 1 Overlay is suitable for applications from vehicular traffic to residential flooring and countertops. Its heat reduction characteristics make Smith’s 4 in 1 Overlay an excellent product for pool decks and patios. Do not freeze.

STAMPABLE OVERLAY

• Water Only – No More Additive Waste

• Horizontal & Vertical Applications• High Polymer Modification• Multiple Applications from 1 Bag• Superior Performance• High Strength (rated for vehicle

traffic)• Interior & Exterior Application• Saves Time and Labor

106

ADOBE BUFFclass II

SUN BUFFclass II

ARABIAN SANDclass II

LIMESTONEclass I

SAND TAUPEclass I

CANYON CLAYclass I

DARK WALNUTclass I

SLATEclass I

MAPLEWOODclass I

ATHENS CLAYclass I

TERRACOTTAclass I

RIO REDclass I

PLATINUM GREYclass II N/R

FRENCH GREYclass II

MEDIUM GREYclass I

CHARCOALclass I

The colors represented above are to serve as a guide only. Variations may occur due to a wide range of variables, including but not limited to, the quality and degree of workmanship and curing conditions. The colors displayed are accurate to laboratory samples. If exactness of color is hypercritical, it is recommended that a jobsite test panel/slab is placed and finished. Professional use only.


SURFACE DEACTIVATOR


SURFACE DEACTIVATOR

Product # Color Code Exposure Depth SSD-02 Purple Acid Etch (0.2mm) SSD-05 Blue Light Sandblast (1/64”) (0.5mm) SSD-10 Brown Medium Sandblast (1/32”) (1mm) SSD-20 Green Heavy Sandblast (1/16”) (2mm) SSD-25 Yellow Exposure (3/32”) (2.5mm) SSD-30 Red Exposure (7/64”) (3mm) SSD-40 Gray Exposure (5/32”) (4mm) SSD-50 Mustard Exposure (3/16”) (5mm) SSD-55 White Exposure (13/64”) (5.5mm) SSD-65 Orange Exposure (1/4”) (6.5mm)

Surface Deactivator by Solomon Colors makes exposed aggregate finishes easier and more consistent. It is topically applied to freshly-placed concrete to prevent cement paste hardening and achieve more controlled exposed aggregate finishes. Unlike sugar-based retarders with uncertain levels of retardation, Surface Deactivator selectively halts the hydration process down to a controlled depth.

Ten predetermined depths of exposure are available, color-coded for identification, to provide consistent, repeatable cement paste removal and aggregate reveal. Because Surface Deactivator provides a longer window before the surface paste must be removed, it allows underlying concrete to harden properly, locking in aggregate and reducing pop-outs. Surface Deactivator is water-soluble for easy removal with high pressure water washing and scrubbing equipment.

Surface Deactivator creates a polymeric-film that acts as a water retention barrier and temporary curing agent, protecting fresh concrete from light rain and reducing moisture loss.Surface Deactivator can be applied to newly placed concrete that is specified for diamond polishing. It softens surface cement paste, reducing heavy grinding stages up to 75% and dramatically decreasing polishing time as well as diamond-tooling and labor costs.

Surface Deactivator offers many features and advantages:• Controlled, repeatable exposure depth.• Available in 10 predetermined depths.• Exposure depths numbered and color coded.• Extended exposure time and reliability.• High performance coverage rate.• Vibrant visual coverage control, non-staining.• Performs in hot and cold conditions.• Film forming and quick drying.• Polymer film reduces moisture loss.• Protects fresh concrete against light rain.• Solvent-free, water-soluble.• VOC Compliant.

DIVISIO

N3 .6

FINISHING AID / POLISHING PRODUCTS

108

LYTHIC DAY1 (Finishing Aid)

POLISHING PRODUCTS

Colloidal Silica-Based Troweling Aid with Added PerformanceLythic Day1 is a colloidal silica-based compound that acts as a troweling aid, curing agent, and a substitute for a membrane-forming curing compound. It is shipped as a concentrate and diluted with water at a 4:1 ratio to make a working solution with a coverage of approximately 1000sf/gal. The solution is spray-applied to freshly laid concrete before it is worked by the power-trowel. Lythic Day1 reacts with the calcium hydroxide in the concrete to form additional CSH, becoming a permanent part of the slab surface. It does not form a film or membrane and reduces drag, increasing the speed of the power-trowel.Day1 slows surface evaporation, as well, giving finishers between 15 and 45 minutes longer to finish the slab. Field testers indicate treatment with Day1 reduced the effect of conditions such as wind, sun, increases in ambient temperature, dry fill material, and other factors beyond the finisher’s control. Anecdotal evidence from contractors indicates using Day1 can “save” concrete slabs that were “getting away” from the finishers. “It’s like having another finisher on the job,” said contractors.As corroborated by third-party laboratory testing, Day1 slows evaporation after final set, improving curing. It is non-membrane forming, though

it has similar water-loss performance as membrane-forming curing compounds. Day1 also resists liquid penetration, causing water to bead and run off, aiding in waterproofing.Day1 is a multifaceted treatment that increases the performance of your concrete. It improves curing, aids in finishing, and resists liquid penetration while becoming an integral part of the concrete slab.LY-1 - Lythic Day 1LY-1001 - 1 GallonLY-1005 - 5 Gallon

LYTHIC DENSIFIERLythic Densifier is used for concrete polishing to hard-en the surface and close the pore structure, enabling the concrete to take a better polish and resist liquid penetration.• Low viscosity for spray application, no surface residue, no scrub-off.• No whitening when dry.• No hazardous waste removal.• Quick reaction time (30-60 min).• Saves time and labor during application.• Prevents dusting, increases durability.• Will not contribute to alkali-silica-reaction (ASR).• Safer PH level (9pH).• Concentrate formula.

LY-2 - Lythic DensifierLY-2001 - 1 GallonLY-2005 - 5 Gallon

LYTHIC DENSIFIER XLLythic Densifier XL is designed specifically for treating extremely porous or deteriorated concrete. • Low viscosity for spray application, no surface residue, no scrub-off.• No whitening when dry.• No hazardous waste removal.• Quick reaction time (30-60 min).• Saves time and labor during application.• Prevents dusting, increases durability.• Will not contribute to alkali-silica-reaction (ASR).• Safer PH level (9pH).• Concentrate formula. LY-3 - Lythic Densifier LX

LY-3001 - 1 GallonLY-3005 - 5 Gallon

LYTHIC PROTECTORLythic Protector is used as the final step of concrete polishing process. It protects against staining and etching agents, and minimizes abrasive wear to the finish.

LY-4 - Lythic ProtectorLY-4001 - 1 GallonLY-4005 - 5 Gallon

LYTHIC CLEANERLythic Cleaner is designed for everyday cleaning of concrete floors. It is an excellent choice for cleaning and maintaining polished concrete and other decorative finishes.LY-5 - Lythic ProtectorLY-5001 - 1 GallonLY-5005 - 5 GallonLY-5055 - 55 Gallon

LYTHIC SPD PROTECTORLythic SPD Protector is designed for commercial, retail, and other high-traffic environments where superior stain and chemical resistance is required.

LY-6 - Lythic SPD ProtectorLY-6000 - 2 Gallon Kit


SURFACE PREPARATIONAND CLEANERS


A water-based, biodegradable concrete etching gel specifically designed to aggressively profile the surfaces of both green (fresh) and mature concrete. The depth of the etch achieved is the same as hydrochloric (HCI) or muriatic acid; it also has 80% less odor and a more uniform etch than muriatic acid. The gel form of QuickEtch conveniently profiles the surface with low/no dust compared with sanding, grinding or shot blasting. Non-ozone depleting. QuickEtch is not to be used as a cleaner. It can be used over decorative masking patterns, such as Modello® Design stencils, to etch a non-slip decorative pattern. Available in 1 and 5 gallon containers. Covers approximately 50-100 sq. ft. (5-9 sq. m) per gallon.

QuickEtch™

EasyStrip 2000 will lift epoxies, urethanes, lead based architectural coatings, powder coatings and other high performance coatings. Use on most architectural surfaces such as concrete, brick, masonry and pavers where high performance coatings are present

The eco-friendly, non-fuming alternative to harsh cleaning acids or hazardous etching chemicals. The fast-acting formula dissolves concrete by attacking the Portland Cement, reducing it to a mush that’s easy to clean and remove from the surface. Use to remove concrete, cured cement, mortar, grout and stucco. Cleans concrete splash, trowels, screeds, hand tools, mixers, pumps, scaffolds, mud tubs, mud boards, trucks, trailers and silos, saws, drills, generators, augers and more. Available in a 22 oz. spray bottle and 1, 2.5, 5 and 55 gallon containers.

u 100% Biodegradable.u Non-hazardous to equipment.u Eco-friendly.u Non-corrosive.u Non-fuming.u Non-flammable.

MeanKlean™

Industrial Concrete & Mortar Dissolver

u Biodegradable.u Fast-acting.u VOC compliant.u Easy to control gel.u Non-acid.u Low odor.u Easy clean-up.

Fast-acting concrete coating and paint removers designed for preparing concrete surfaces for NewLook decorative stains and other decorative concrete products. They are safe to use, contain no TAP’s or HAP’s, offer easy clean-up with pressure washing, NewLook Concrete Degreaser™. Especially useful where worker safety or damage to delicate equipment may be a concern. Recommended for use on nearly all substrates, including concrete, steel, aluminum, masonry or wood (lead-based paints). Available in 1 and 5 gallon containers. Covers approximately 50-100 sq. ft. (5-9 sq. m) per gallon.

EasyStrip 1000 will lift most sealers, acrylics, non-acid stains, non-lead based paints, urethanes, lacquers and varnish. Not recommended for use on epoxies or polyureas. Use on most architectural surfaces such as concrete, brick, masonry and pavers where sealers and non-lead based paints are present.

EasyStrip™1000 & 2000

u Aggressive etching gel.u Alternative to grinding.u Deep profiling.u More uniform etch than acid.u 80% less odor than acid.

DIVISIO

N3 .6

EFFLORESCENCE CURE& CONCRETE SEALER

110

EffLock Liquid Admixture

SmartSeal™ AU-25 (25% solids) & SmartSeal™ AU-34 (34% solids)A water-based, nano-acrylic urethane sealers designed for use over NewLook concrete color stains, properly prepared concrete floors and other new or old concrete and masonry surfaces. These proprietary formulas dry quickly and create a strong, protective, blush resistant film. Once cure, SmartSeal has excellent abrasion and chemical resistance; it also resists hot tie, rain, UV, most common household chemicals, oil and grease. Available in 1 and 5 gallon containers. Matte, stain and gloss finishes available. Covers approx. 200-400 sq. ft. per gallon on unsealed surfaces. 400-600 sq. ft. on sealed surfaces.

SmartSeal™ WBA high-quality water-based nano-acrylic sealer designed for use over NewLook concrete color stains, properly prepared concrete floors, pool decks and other new or old concrete and masonry surfaces. SmartSeal WB’s proprietary, low solids (22%) formula dries quickly and creates a breathable protective layer that is blush resistant. Once cured, SmartSeal WB has good abrasion and chemical resistance; it also resists rain, UV, most common household chemicals, oil and grease. Available in 1 and 5 gallon containers. Matte, stain and gloss finishes available. Covers approx. 200-400 sq. ft. per gallon on unsealed surfaces. 400-600 sq. ft. on sealed surfaces.

u Tougher than water-based acrylics.u Cross-links like a 2-component sealer.u Strong blush (whiting) resistance.u Excellent resistance to abrasion, chemi-

cals and hot tire pick-up.u Non-yellowing.

u Use indoors and outdoors.u Great general purpose sealer.u Stainable with NewLook stains.u Good chemical resistance.u Good hot tire resistance.u Eco-friendly; VOC compliant.u Non-yellowing.u Strong blush (whiting) resistance.

u Cures and stops efflorescence.u Easier to mix than powder.u Improves density and green cure strength.u Enhances concrete uniformity.u Stabilizes and brightens integral color.u Mix 8-10 oz. (237-296mL) per each 100 lbs. of cement.u Packaged in 16 oz., 1, 5 and 55 gallon containers.

EffLock Topical Treatmentu Ready-to-use liquid solution (use after Efflorescence Remover).u Prevents efflorescence.u Improves concrete density.u Works with pre-cast, brick, block, pavers, stucco and more.u Covers approx. 200 sq. ft. per gallon.u Packaged in 16 oz., 1, 5 and 55 gallon containers.

EffLock Efflorescence Removeru Ready-to-use solution.u Removes efflorescence.u Strong etching properties.u Safe for metals and equipment.u Use before EffLock Topical Treatment.u Covers approx. 200 sq. ft. per gallon.u Packaged in 32 oz. spray, 1, 5 and 55 gallon containers.EffLock Powder Admixture

u Cures and stops efflorescence.u Improves density and green cure strength.u Enhances concrete uniformity.u Stabilizes and brightens integral color.u Mix 4-5 oz. (119-148mL) per each 100 lbs. of cement.u Packaged in 32 oz., 1, 5 and 55 gallon containers.

EffLock is a truly revolutionary efflorescence-curing system that is guaranteed to stop both primary and secondary efflorescence in concrete and masonry. The water-based, nano-fusion formula reacts with and permanently binds concrete chemical impurities at the nano-molecular level. This prevents the leaching of efflorescent salt for the life of the concrete, resulting in enhanced concrete performance. EffLock is not a waterproofing sealer, rather its unique chemistry uses hydrogen to convert chlorides and other contaminants into harmless matter.

SmartSeal™

u Cures and stops efflorescence permanently.u Improves density and green cure strength.u Stabilizes and brightens integral colors.u Enhances uniformity; reduces pinholes.u Eco-friendly, water based formula.u Use with pre-cast, brick, block, stucco.


CONCRETE SEALERAND STRIPPERS


Endurable Sealer has been created from cutting edge polyurethane technology that allows for maximum penetration, durability, and chemical resistance – while still delivering ease of application.

COVERAGE RATES300-800 square feet per gallon depending on porosity of surface.PACKAGINGConcentrate that makes 1.12 gallons.Concentrate that makes 9 gallons (9 gallon concentrate may be made 4.5 gallons at a time).MIX RATIOWater is mixed with the sealer components at a ratio of 2 parts water to 1 part mixed sealer components (for fastest dry times on smooth surface concrete, mix the second coat of sealer at 1 part water to 1 part mixed components).WHERE TO USE• Concrete – garages, driveways, patios, walkways, countertops, pool

decks, commercial floors, etc.• Masonry, terrazzo and natural stones.

ADVANTAGES• Comes in matte and gloss. • Spray, roll, or micro-fiber

application.• Low VOC’s, low odor.• Heavy-duty – forklift traffic and parking garages.• UV Stable – will not yellow or degrade in sunlight.

• Anti-graffiti.• Safe for countertops.• Incredible chemical resistance.• Very hard – incredible scratch

resistance.• No hot tire pick-up.

ADVANTAGES• Contains no highly toxic solvents or caustics.• Works on almost every type of sealer, paint, coating or varnish.• Long-lasting – can remove several layers of coatings without

evaporating or losing its strength.• Requires no special equipment. Can be applied with a mop.• Will not burn your skin.• Nearly odorless and safe to use indoors.• Clean-up is easy.COVERAGE RATES75-200 square feet per gallon depending on coating and number of layers to be removed.PACKAGING1 gallon kit4 gallon kitWHERE TO USEUse on any horizontal substrate besides resilient surfaces such as vinyl, VCT, or rubber.

COVERAGE RATES300-800 square feet per gallon depending on porosity of surface.PACKAGINGConcentrate that makes 1 gallon.Concentrate that makes 2 gallons.MIX RATIOWater is mixed with sealer at a ratio of 1 part water to 1 part sealer.WHERE TO USE• Concrete – garages, driveways, patios, walkways, countertops, etc.

Product has good resistance to chlorine, making it an effective sealer on pool decks. This sealer is not recommended in applications where motor oils, hydraulic fluids, etc. may be applicable.

• Masonry, terrazzo and natural stones.

ADVANTAGES• Matte or gloss finish.• Spray, roll, or micro-fiber

application.• Low VOC’s, low odor.• Very durable.• Good UV stability.

• Quick to dry.• Safe for countertops.• Good chemical resistance.• Very easy to apply.• Good against hot tire pick-up.

Endurable F1 Sealer is great replacement for solvent-based sealers. It has a very low VOC content, is very easy to apply and lasts twice as long as most acrylics.

Endurable Power Stripper is a non-hazardous stripper for coatings, sealers, paints and varnishes. It has very low odor, is cost-effective and will handle almost any finish. ADVANTAGES

• Contains no highly toxic solvents or caustics.• Works on almost every type of sealer, paint, coating or varnish.• Long-lasting – can remove several layers of coatings without

evaporating or losing its strength.• Requires no special equipment.• Will not burn your skin.• Nearly odorless and safe to use indoors.• Clean-up is easy.COVERAGE RATES75-200 square feet per gallon depending on coating and number of layers to be removed.PACKAGING1 gallon kit4 gallon kitWHERE TO USEUse on any vertical substrate besides resilient surfaces such as vinyl, VCT, or rubber. This product is perfect for lead abatement as it encapsulates lead and other heavy metals and does not allow them to escape into the air.

Endurable Vertical Stripper is a non-hazardous stripper for coatings, sealers, paints , varnishes on vertical surfaces. It has very low odor, is cost-effective, and will handle almost any finish.

DIVISIO

N3 .6

CURE & SEAL / CONCRETE STAIN

112

SATIN CURE & SEAL™ – WB 1315

PRO-DYE Penetrating Stain & Mottling Agent for Concrete

Pro-Dye Standard ColorsSwatches shown here represent Pro-Dye applied to white Micro-Topping (left) and gray concrete (right).Disclaimer - When choosing colors, use the appropriate BRICKFORM color selection guide for more accurate matching. Colors shown here display only the range of BRICKFORM options available. To confirm an exact color, have your contractor prepare a color sample for your approval before actual construction. BRICKFORM accepts no responsibility for color matching or misprints.

BRICKFORM Satin Cure & Seal is a water based, clear acrylic co-polymer curing compound, dustproofer and sealer all in one. Satin Cure & Seal minimizes moisture loss from evaporation in newly placed concrete to provide maximum strength, hardness and protection. Reducing water evaporation loss will result is a stronger, denser, more durable concrete with higher compressive strength, and better crack and freeze-thaw resistance.

GEM CURE & SEAL™ 309 – 100/VOC

BRICKFORM Gem Cure & Seal is a solvent based, clear acrylate copolymer curing compound, dustproofer and sealer all in one. Gem Cure & Seal minimizes moisture loss from evaporation in newly placed concrete to provide maximum strength, hardness and protection. Reducing water evaporation loss will result is a stronger, denser, more durable concrete with higher compressive strength, and better crack and freeze-thaw resistance.

BRICKFORM Pro-Dye penetrates the surface of newly cured or existing non-porous concrete, creating a layer of translucent color that dries quickly and will not chip, crack, or peel. The colors produced in each section of concrete will be unique with captivating, multi-colored intensities that become a permanent part of the concrete. Colors can be combined to create an unlimited number of color variations. When applied properly, Pro-Dye creates intense color that has a look similar to the mottling effect of acid stain. BRICKFORM Pro-Dye is packaged in liquid form to be mixed in proportion to acetone. It is designed to work with the BRICKFORM PROFESSIONAL CONCRETE POLISHING SYSTEM for the coloring process in polishing floors. BRICKFORM Pro-Dye is durable enough for commercial applications like restaurants, showrooms and retail spaces. It can be used to create vivid, new color

for interior floors or concrete countertops. BRICKFORM Pro-Dye can also be used to correct areas where acid stains have little or no reaction on the concrete surface. Pro-Dye is excellent in vertical applications, stencils, and logos because it dries so quickly• Interior Use Only• Easy To Spray Apply• Dries Quickly• Use Any Spray-On Sealer

TURQUOISE, DSL-210 COFFEE, DSL-310 CARAMEL, DSL-410 MAHOGANY, DSL-510 EBONY, DSL-610

JADE, DSL-110

MISSION BROWN, DSL-710 AMBER, DSL-810 OLIVE, DSL-910 WALNUT, DSL-1010 GOLD, DSL-2010

RAW SIENNA, DSL-2210 DEEP CARAMEL, DSL-2510 SAND, DSL-2710 TERRA COTTA, DSL-3010 CHOCOLATE BROWN, DSL-3510

SADDLE BROWN, DSL-3710 DEEP WALNUT, DSL-4010 BURNT SIENNA, DSL-4210 CHESTNUT, DSL-4510 SEPIA, DSL-5010

EGGPLANT, DSL-5210 PATRIOT BLUE, DSL-5510 FOREST GREEN, DSL-6710 MIDNIGHT BLACK, DSL-7010 BLACK, DSL-7210

WHITEMICRO-TOPPING

GRAYCONCRETE


CONCRETE STAIN


The ORIGINAL Solid Color Stain™u Restores & revitalizes ugly concrete.u Natural-looking finish.u Fixes faded integral color & failed acid

stain.u Completely opaque, uniform finish.

A premium water-based, polymer-modified concrete stain that creates a completely opaque and natural-looking finish. Use to restore previously colored surfaces or rejuvenate old, tired-looking concrete by completely covering discolorations, faded integral color or failed acid stains. Used on existing concrete flat work, vertical surfaces, concrete blocks, pavers, imprinted (stamped) concrete and many other porous surfaces. Perfect for use on micro-toppings and overlayments. Sealer not always required.• Large (32 oz.) standard size 4-part kit covers approx. 350-400 sq. ft. (32.5-37 sq. m) twice.• Small (4 oz.) test size 4-part kit covers approx. 45-50 sq. ft. (4-4.6 sq. m) twice.

Translucent Color Enhancer™u Quickly restores exposed aggregate.u Use indoors & outdoors.u Easily installed with a sprayer or brush.u Many vibrant, natural & UV-stable colors.

A premium water-based, polymer-modified concrete color stain used to restore exposed aggregate, faux finish flat work, and enhance areas of relief or texture on stamped concrete surfaces with a vibrant finish. As a translucent (non-solid) stain, the Enhancer can create an aesthetic multi-toned finish when used over the ORIGINAL Solid Color Stain™ in a contrasting color. The color value may also be darkened with the Color Additive Booster™. Must be sealed.

• Extra Large (32 oz.) size 3-part kit covers approx. 600-1200 sq. ft. (56-111 sq. m).• Large (16 oz.) size 3-part kit covers approx. 300-600 sq. ft. (28-56 sq. m).• Medium (4 oz.) size 3-part kit covers approx. 75-150 sq. ft. (7-14 sq. m).• Small (2 oz.) test size 3-part kit covers approx. 35-75 sq. ft. (4-7 sq. m).

WallStain™u Ready to use, single component.u Acrylic emulsion stain/sealer.u Resists abrasion & UV.u No primer required.u Resists mold, fungus growth.u Install with airless sprayers & rollers.u Available in standard NewLook colors.

WallStain™ SolidAn opaque (solid) non-yellowing acrylic emulsion stain/sealer designed to color, seal, and protect vertical concrete and masonry surfaces, eg. pre-cast and tilt-ups. Installs easily and quickly for vertical surfaces. WallStain will cure to a matte-satin finish when properly applied. Resist stains, UV, abrasion and minimize hairline cracking, dusting and spalling. Compatible with all NewLook concrete color stains and sealers. Limited color matching available.• Available in 1, 5 and 55 gallon containers. Covers approximately 200-300 sq. ft. per gallon.

WallStain™ TranslucentThe translucent version of WallStain is used to create highlights over WallStain Solid for a more natural, multi-colored finish. Limited color matching available. • Available in 1, 5 and 55 gallon containers. Covers approximately 200-300 sq. ft. per gallon.

WallStainSolid Base:• Sierra (344)*

TranslucentColors:• Maple (290)*• Beach House (233)*

*See color chart on page 114

DIVISIO

N3 .6

CONCRETE STAIN

114

The following products are available in these 20 Standard Colors:u The ORIGINAL Solid Color Stainu Translucent Color Enhanceru WallStainu Endura Solid Stainu Endura Cool Stain

Maintaining the image of concrete has never been easier than with NewLook’s family of architectural concrete stains. They are water-based, non-reactive and are used to restore old, tired-looking and faded concrete. Use NewLook’s premium stains to achieve sustainability and fix common concrete color problems like discolored, blotchy or stained concrete, wrong colors, failed acid-stain, faded integral color and more.

206 Charcoal 276 Medium Gray 275 Light Gray 214 Moonrock 202 Natural

215 Sunrise 344 Sierra 213 Caramel 225 Cowboy Dust 233 Beach House

286 Harvest 291 Fresco 292 Autumn Wood 294 Mountain Brown 272 Dark Brown

293 Spanish Clay 244 Terracotta 245 Spanish Red 295 Light Oak 237 Buffalo Brown

IMPORTANT: The colors above are for reference purposes only. They are approximate and, as close as possible, represent stained concrete with a flat-troweled or smooth finish. When choosing colors, use the respective Standard Color Selection Guide (available from Spec-West) for more accurate matching. NewLook International, Inc. cannot control (and is not responsible for) application methods, jobsite conditions, finishing techniques, preparation, curing methods, or other jobsite variables and, therefore, cannot guarantee the final appearance, adhesion or an exact match. Texture or finishing techniques, the use of sealers and slight color drifts in raw materials can produce variations in color appearance. Husbands must receive permission from their wives before selecting a color!

Premium Concrete Color Stains


CONCRETE STAIN


u Low build material.u High performance, single component stain.u Appears very natural upon application.u Ready to use premium contractor grade.u Apply with a NewLook brush or sprayer.u Performance enhancing additives that increase color

fastness and resistance to the elements.NewLook Endura Solid Stain is a single component concrete stain that is highly durable and easy to use. Developed to stain concrete, restore faded concrete or maintain concrete, it is affordable, premium in quality and performance. The product is contractor grade and compatible with NewLook’s extensive line of products.

u Reduces surface temperature up to 50°F.u Increases solar reflectivity and emissivity.u Lowers energy absorption.u Reduces Urban Heat Island effect.u Single component stain.

• 5 Gallon pail covers approx. 1250-2500 sq. ft. (116-232 sq. m)• 1 Gallon container covers approx. 250-500 sq. ft. (23-46 sq. m)• 1 Quart can covers approx. 62-125 sq. ft. (6-12 sq. m)• 4 Oz. test bottle covers approx. 7-14 sq. ft. (.65-1.3 sq. m)

• 1 quart covers approximately 75-100 sq. ft. per coat• 1 gallon covers approximately 300-400 sq. ft. per coat• 5 gallons covers approximately 1500-2000 sq. ft. per coat

*See color chart on page 114

ENDURASOLID STAIN

ENDURACOOL STAIN

EnduraStain is a new line of SINGLE COMPONENT concrete stains that are highly durable and easy to use. Developed to stain concrete, restore faded concrete or maintain concrete, EnduraStain is affordable and premium in quality and performance.

Benefits

A premium quality single component water-based, polymer-modified concrete color stain used to reduce the surface temperature of existing concrete. The patent-pending formula uses revolutionary infrared reflective technology to increase the solar reflectivity of concrete surfaces exposed to sunlight, reducing the surface temperature by up to 50°F. Endura Cool Stain provides a completely opaque, breathable and natural-looking finish. Perfect for use on concrete pool decks and municipal projects.

DIVISIO

N3 .6

CONCRETE STAIN

116

u Single Component / Ready to use.

u Easily replicates an acid stain look.

u May be used on smooth or textured surfaces.

u Use one or more colors to achieve a color fusion.

u VOC compliant 100 g/l.

Endura Faux Fusion™ is a water-based, semi-transparent concrete color stain that beautifies and enhances both exterior and interior porous concrete. It can be sprayed or brush applied to create an acid look or faux finish. Apply stain in various intensities with random motions to mottle the color. One or more colors may be used wet on wet or dry to achieve a color fusion.

401 Black Fury 403 Rhino Gray 405 Yeti White 407 Sasquatch Brown 409 Mahogany Rose

411 Havana Brown 413 Egyptian Sand 415 Ancient Amber 417 Tamarind Spice 419 Chipotle Red

421 Sparkling Cider 423 Russian Olive 425 Python Green 427 Pistachio 429 Mahalo Teal

431 Wild Flower Yellow 433 Samurai Red 435 Maui Orchid 437 African Violet 439 Poseidon Blue

Color Disclaimer: The colors shown are approximate and, as close as possible, represent concrete with a stamped finish. NewLook International, Inc.™ cannot control (and is not responsible for) application methods, jobsite conditions, finishing techniques, curing methods or other jobsite variables and, therefore, cannot guarantee the final appearance, adhesion or an exact color match. Texturing or finishing techniques, such as grooming or troweling, the use of sealers and slight color-drifts in raw materials can produce variations in color. NewLook International, Inc. Strongly recommends representative jobsite samples (mock-ups) prior to project installation. NewLook Concrete Color Stains are ideal for driveways, garage floors, pool decks, offices, restaurants, hotels, theme parks, shopping malls, walkways, schools and other high-traffic municipal areas.

PRODUCT COVERAGE1 Quart = 87 - 175 ft2 per coat / 8 - 16m2

1 Gal. = 250 - 500 ft2 per coat / 23 - 46m2

5 Gal. = 1,750 - 3,500 ft2 per coat / 162 - 325m2

Coverage is based on substrate porosity, moisture content, surface temperature and application method.


CONCRETE STAIN


BRICKFORM Blush-Tone Acid Stain lets you create colors with real depth that are unique and captivating. Thousands of different looks can be achieved ranging from the understated elegance of burnished leather to the ageless beauty of natural stone. Blush-Tone Acid Stain will open the door to a whole new palette of creative expression.

Color ChartAcid stains react with chemicals within the concrete to form lasting color. The initial color of the stain may not match the final color as a reaction has not yet completed. Disclaimer: This color chart should be used as a general guide, not a definitive indicator of final color. Shades and hues can vary depending on screen settings. When planning a project, consult a physical color card for a better indication of potential color. Create a representative mockup before any project to better account for the effects of conditions, material, and techniques that may alter the final appearance or color.

CS-100 Jade CS-200 Turquoise CS-300 Coffee CS-500 Mahogany

CS-600 Ebony CS-700 Mission Brown CS-800 Amber CS-1000 WalnutCS-900 Olive

CS-400 Caramel

CS-100 Jade CS-200 Turquoise CS-300 Coffee CS-500 Mahogany

CS-600 Ebony CS-700 Mission Brown CS-800 Amber CS-1000 WalnutCS-900 Olive

CS-400 Caramel

Blush-Tone Acid Stain Applied to Gray Concrete

Blush-Tone Acid Stain Applied to White Overlay

BLUSH-TONE ACID STAIN™

• Thousands of different looks can be achieved.• Creates unique, captivating, multi-colored intensities.• Creates colors with real depth.• Will not chip, crack or peel.

DIVISIO

N3 .6

CONCRETE STAIN

118

Kemiko® Stone Tone™ Stain

Kemiko® Stone Tone™ Stain Color Chart

KEMIKO® STONE TONE SEALER II is a waterborne acrylic that is applied over KEMIKO® STONE TONE STAIN and Rembrandt Polymer Stains. It is supplied in a clear gloss and satin finish and is a non-yellowing interior and exterior coating.

Stone Tone Buff On Wax

Benefits Include:• Durability• High Protection.

KEMIKO® STONE TONE BUFF ON WAX (Solvent Based) is formulated to produce a low sheen finish with high protection and durability. It is designed for interior use over KEMIKO® STONE TONE STAIN, pigmented colored concrete, tile, brick or any masonry surface.

Also available as a water based wax: Buff on Wax II

Benefits Include:• Excellent Chemical Resistance• Excellent Replacement for High VOC

Lacquers, Acrylic and Varnishes • Excellent Leveling and Flow Properties• Fast Cure• LEED Compliant• Low Odor - Low VOC.Commonly Found In:• Residential Floors• Schools and Hospitals.

COLAMedium Brown with

Red Undertones

MALAY TANMedium Buckskin with

Orange Undertones

VINTAGE UMBEREarthy Brown withRed Undertones

WALNUTSoft, Warm

Brown

GOLDEN WHEATSoft Amber with

Yellow Undertones

BLACKTortoise Shell Black with

Brown Undertones

GARDEN GOLDWarm Yellow with

Orange Undertones

ENGLISH REDRusty, Warm

Brown

GREEN LAWNSoft Green with

Grey Undertones

AQUA BLUESoft, Ocean Blue with

Green Undertones

Colors are an approximate representation, actual results may vary.

KEMIKO® STONE TONE CONCRETE STAIN is a single component reactive stain that transforms an ordinary concrete slab into a luxurious floor that resembles marble or glazed stone at a fraction of the cost. Available in 10 colors, it will not chip, fade or peel. KEMIKO® STONE TONE STAIN may be applied to concrete surfaces that are properly prepared, thoroughly cleaned and not acid etched in any way.Benefits Include:• Cost-effective• Durable• Permanent• Versatile• LEED Compliant• Low Odor – Zero VOC• Low Maintenance.

Stone Tone Sealer II


COlOr FlOOrSmith’s Color Floor is a water-based extra-strength stain developed to give a decorative natural appearance to concrete floors and other porous mediums. It is an excellent tool for the concrete market that can produce unbelievable works of art. Formulated as a user-friendly alternative to hazardous solvent and acid-based stains, Color Floor utilizes state-of-the-art acrylic polymer research and pigment preparation to ensure the highest quality results. Thanks to its superior adhesion, the stain works well on a variety of surfaces including, but not limited to, interior and exterior concrete, brick, plaster and natural stone. Color Floor can be applied to previously sealed surfaces, allowing an applicator to save jobs with little hassle. In addition to the Classic Series (semi-transparent stains), Smith’s Color Floor

is available in Old World Series (transparent stains) and Bright Light Series (high-chroma stains).Color Floor can be applied via airbrush, high volume low pressure unit (HVLP), production gun, pump (bug)

sprayer, sea sponge and traditional bristle brush. For best results, create a “mist” of Smith’s Color Floor on the intended surface. A variegated finish is achieved through the various absorbencies of the surface material as well as the differing specific gravities of the color pigments. Roller application methods force absorption of the diluted stain resulting in mechanical lines.

CONCRETE STAIN

• Low Odor• Low VOC• Weather Resistant• Ultra Violet Light Resistant• Alkali Resistant• Water Submersible• Fast Air Dry• Overnight Deliverable - No

Red Label• Interior/Exterior Application


Base BOOstSmith’s Base Boost is a blend of silicates used as an additive to Smith’s Color Floor and/or Smith’s Color Wall to promote substrate adhesion for base or primary colors as well as increase the stains durability. Smith’s Color Floor and Color Wall stains already achieve superior mechanical adhesion as a result of the modified acrylic carrier, but adding Base Boost into the Smith’s Concentrate produces an additional bond by reacting with the unhydrated calcium hydroxide found in the concrete. Smith’s Base Boost should not be used for application to overlays, previously coated substrates, or as an additive for highlight colors.

• No VOC• Horizontal and Vertical

Applications• Increased Durability• Biodegradable• Low Odor• Overnight Deliverable - No

Red Label• Interior/Exterior Application

Green CleanSmith’s Green Clean is a non-corrosive biodegradable gel developed to prepare a concrete substrate by producing a moderate surface texture. From the machine troweled interior surfaces to smooth exterior slabs. Green Clean is the next generation in surface preparation.

• Produce a moderate texture on machine troweled concrete

• Biodegradable• User friendly• Non-corrosive• Low Odor• Overnight Deliverable - No

Red Label

nature shieldSmith’s Nature Shield is a priming/penetrating water, oil and stain repellent developed to both mechanically and chemically bond to a wide variety of mineral substrates including, but not limited to concrete, stucco, pavers, natural stone, clay tile (Saltillo tile), and brick. This product is effective for applications where oil and stain resistance as well as water repellency is desired to reduce undesired stains, cracking, freeze / thaw damage, chemical degradation, biological growth, efflorescence and dirt pickup. Nature Shield serves a primer (excellent intercoat adhesion) for various Smith’s Decorative Concrete Products.

• Primer Coat / Mitigates Moisture Transfer

• Color Options Available• Low Odor / Low VOC• Ultra Violet Light Resistant• Reduce Maintenance Costs• Minimal Change In Substrate Appearance• User Friendly / Fast Air Dry• Overnight Deliverable - No

Red Label

DIVISIO

N3 .6

CONCRETE STAIN

120

Clas

sicSe

ries

Old W

orld

Serie

s(T

rans

pare

nt)

Brigh

t Ligh

tsSe

ries

(High

Chr

oma)

These plaques are only representations of the stain colors .

Actual field results may vary .

WhiteCF/CW-100

NaturalCF/CW-110

Antique GrayCF/CW-120

GrayCF/CW-130

BlackCF/CW-140

PatinaCF/CW-160

Olive GreenCF/CW-180

Yellow OchreCF/CW-200

SandstoneCF/CW-210

PotteryCF/CW-220

MauveCF/CW-225

Terra CottaCF/CW-230

Mars RedCF/CW-240

Desert SandCF/CW-250

Light AdobeCF/CW-260

Dark AdobeCF/CW-270

Dark BrownCF/CW-280

Dark ChocolateCF/CW-290

Moss GreenCF/CW-170

Sea FoamCF/CW-560

LodenCF/CW-570

HoneyCF/CW-600

AmberCF/CW-630

Red ClayCF/CW-640

FawnCF/CW-700

NutmegCF/CW-710

PurpleCF-900

Ocean BlueCF-910

Deep Aqua GreenCF-920

GreenCF-930

YellowCF-940

OrangeCF-950

RedCF-960


(Semi-transparent)

CONCRETE STAIN


ENDURable Concrete Stain is a specially formulated, non-reactive, semi-transparent stain that will penetrate and color most porous surfaces. It can be mixed in water, acetone or denatured alcohol. It is a low VOC product with no odor and cutting edge technology to bring you the smallest particle size available in a concrete stain to allow the greatest penetration.You may mix the stain into your choice of carrying agent with a drill and paddle or simply pour together and shake vigorously. It is highly recommended to always perform test areas to find the desired look you are trying to accomplish.

• It is ideal for exterior use as it is UV protected and will not fade in the sun.

• It is packaged as a liquid concentrate. Mottled looks similar to acid stain applications can be accomplished with application techniques.

• Application of a sealer is required and possible immediately after the stain is completely dry.

• The shelf life in concentrate form and mixed form is undetermined, but at minimum 8 years. The product comes in a concentrate that makes 1 gallon and also a concentrate that makes 5 gallons.

• The surface must be dry prior to application. If there is a cure & seal present, you must use acetone as the carrying agent to penetrate the cure & seal.

• Application is easiest with a pump sprayer with a conical tip. Tip size of .05 to .15 gpm at 40 psi is recommended to reach coverage rates of 400-600 s.f. per gallon.

• There may be residue left on the surface, most notably when the carrying agent is acetone, and when applied to a surface that has low porosity. You may wish to remove the excess residue with a white buff pad when working on a flat surface, but not necessary on broom-finished concrete. Seal with ENDURABLE SEALER or ENDURABLE F1 SEALER.

• The coverage rate is between 400-600 square feet per gallon. A light coat is recommended as the stain will go far. Applying too heavy will result in excess residue and

it will lower your coverage rate.

Amber Canary Citron Dark Chocolate Milk Chocolate

Moss Mustang Obsidian Orange Crush Orchid

Pacific Padre Rage Sand Storm Cloud

Topaz Saddlehorn Rust Sonora Pronghorn

ENDURABLE CONCRETE STAIN COLOR SELECTIONS

DIVISIO

N3 .6

DECORATIVE OVERLAYMENT & COUNTERTOPS

122

Pou

r-in

-Pla

ce

Cou

nter

tops

Flexible Concrete Flooring

• Use for flooring, countertops, wall panels, and much more.• Add your own sand and virtually any aggregate.• Use standard UV stable paint pigment to achieve any color.

One mix does it all!

ElastoCrete Mix (no sand)

Fiber Add PackShell Add Pack

ElastoShield Matte

(Water borne polyurethane) (Solvent borne polyurethane)

(Solvent borne polyurethane) (Solvent borne polyurethane)

ElastoShield Gloss

Satin High Solids High Gloss High Solids

Spe

cial

tyIt

ems

Add to mix when making sinks, shower panels or other applications where moisture is present. (not for submerged applications)

Add to standard liquid to thicken the mix for vertical applications.

Color to match your project, use to fill pin holes, prepare for sealer.

Use over any color to fill holes, pre-pare for sealer.

Fast set-ting grout that can be sealed after 30 minutes.

Use to prepare surface for sealer.

Rub on forms for quick and easy release.

WaterResistant Additive

Pressed Mix Additive

Penetrating Primer Release

Standard Grout Clear GroutQuick Grout

LIMITLESS CONCRETE

Sea

lers

Add to ElastoCrete Mix for a Cus-tom Look.


INDUSTRIAL COATINGS


KEMIKO® Waterborne Epoxy Topcoat (SS1600) is a two-component, water extended epoxy that offers excellent film properties, a long pot life, and is designed to be used as a thin film resilient primer/finish. This product can be applied on cement floors, steel, wood, plaster and even damp surfaces. Applications include any surface that requires a cost-effective, surface tolerant general maintenance coating.Benefits Include:• USDA Acceptable in food processing facilities • High Gloss• Low VOC—Low Odor• Water Clean Up• Cures Overnight• Available in Clear & Various Colors.

KEMIKO® Clear High Solids Polyaspartic (SS3200) is a high solids, two-component polyaspartic that can be used as a decorative or industrial environment topcoat.Benefits Include:• Quick Curing• Excellent Adhesion• Excellent UV Resistance• LEED Compliant• Very Low Odor – Low VOC• Excellent Abrasion & Chemical Resistance• Hot Tire Resistance.

KEMIKO® 100% Solids Self-LevelingClear Top Coat (SS1202) is a 100% solids, low viscosity, and water clear epoxy coating designed to be used with color quartz and selected aggregate. It cures overnight to a blush free, resilient high gloss film.Benefits Include:• Chemical Resistance• Zero VOC• Available in Two Cure Speeds• USDA Acceptable in food processing facilities • Available in Clear only.

KEMIKO® UV Resistant 100% Solids Self-Leveling Clear Top Coat (SS1202UVR) is a 100% solids clear epoxy coating product offering excellent UV resistance, low viscosity and 0 VOC. It has excellent chemical resistance, is designed to be used with color quartz and selected aggregate and cures to a blush free, resilient high gloss film. It can be applied as a finish on most interior cement floor surfaces and cures overnight. According to United States Department of Agriculture guidelines, this coating has been determined to be chemically acceptable for application to structural surfaces where there is a possibility of incidental food contact in establishments operating under the Federal Meat and Poultry Products Inspection Program.ApplicationsThis product may be applied as a topcoat to properly prepared concrete floors subject to continuous traffic such as: showrooms, warehouses, food and chemical processing facilities, hospitals, kitchens, breweries, laboratories, gymnasiums, garages and many other applications that require a high gloss resilient floor finish. The low viscosity mixture allows easy aggregate filling for slurry applications or aggregate broadcast systems for increased compressive strength and high impact service.

KEMIKO® High Solids Epoxy Moisture Barrier System (SS1120) is atwo-component polyamide amine cured epoxy. It is used in waterproofing and sealing above-grade and below-grade walls and floors. This product can be applied to properly prepared concrete walls, floors, and masonry walls exposed to damp conditions.Benefits Include:• VOC Compliant• Extremely Surface Tolerant• Eliminate/Reduce Water Vapor Transmissions.

KEMIKO® Waterborne Aliphatic Polyurethane (SS2700) is a universal, waterborne, high solids, HDI cured two component product. It may be applied to properly prepared concrete, plaster, wood, FRP, GFRC, metals and as a protective finish over Kemiko water base epoxies. USDA acceptable for surfaces where there is the possibility for incidental food contact.Benefits Include:• Excellent UV Resistance Suitable for Exterior Applications• Excellent Abrasion and Chemical Resistance• LEED Compliant• Low Odor – Low VOC• Easy Clean Up• Available in High Gloss (clear and pigmented), White and Satin.

DIVISIO

N3 .6

WATERPROOF &EPOXY COATINGS

124

M A D E I N U . S . A . • F O R P R O F E S S I O N A L U S E O N L Y

ALX STANDARD

ALXWaterproof Decking System• Unmatched Strength and Durability• Available Manufacturer’s Warranty• Excellent Sound Reduction Qualities• Tough Final Coat is UV Resistant• Covers Rough Plywood and Seams• Safe Skid Resistant Textured Finish• Decorative Finishes Available

INDUSTRIAL

BROADCAST

STANDARD

Temper-CreteUrethane Cement• USDA/FDA/ADA Compliant• Thermal Shock Resistant• High Compressive Strength• Chemical and Heat Resistant• Three System Options Including Cove

®


COUNTERTOP FORMS


Square Edge

Quarter Bullnose Fancy Edge Double Fancy

Full Bullnose Half Bullnose

DF-001(8) 8’ pieces

EF-001(8) 8’ pieces

QB-001(8) 8’ pieces

SE-001(8) 8’ pieces

FB-001(8) 8’ pieces

HB-001(8) 8’ pieces

PC-001 Precast FormAll kits include (12) 8’ pieces of precast form.

EE-001 Z Edge Expert SetInside and outside corner cutting guides that hold all edge pro-files firmly in the correct position while mitering.

*All cast-in-place form packages include (6) 8’ pieces of backwall forms.

LC-001 Z Counter-Pack Conversion KitA multi-component admixture for converting a standard 60 lb. bag of concrete mix into a high performance, easy to finish concrete countertop mix. Coverage: 3.75 sq. ft. in Z Counterforms (1-5/8” thick) when combined with 60 lb. concrete mix.

SF-001 Sink FormSingle 8’ self-adhering flexible sink form. Will conform to most undermount sinks. May have to be notched for double bowl sink. The sink must have vertical walls.

FK-001 Faucet KnockoutsSet of two reusable silicone faucet knockouts. Each will create a 1-1/4” hole through the surface of the countertop and 2-1/2” pocket to attach hardware. This will accept most faucets and spouts.

DPK-001 Z Gem PadsKit includes three diamond pads, #60, #150, #300 and one foam block. It is the only flexible Diamond hand pad on the market. This will allow the pad to conform to curved edges, ensuring even sanding on all surfaces.

RFL-001 Rock Face Form Liner Reusable, 8-foot form liner. 2-1/4”, made to fit perfectly inside of Z-Counterform Square Edge Form. Gives your countertop a realistic, chiseled stone edge.

DIVISIO

N3 .6

CONCRETE COUNTERTOPS

A comprehensive line of products for creating concrete countertops, as well as a wide range of artisan and architectural concrete. Buddy Rhodes Concrete Products has been supplying materials, training and support for concrete countertops and artisan architectural concrete longer than any other company in the market. The Buddy Rhodes team consists of artisans who have worked professionally producing concrete countertops and architectural objects for decades, who have taken their experience to develop a comprehensive offering of materials of the highest quality designed specifically for use in artisan concrete. If you can picture it, the materials Buddy offers can make it a reality. If you can’t picture it, Buddy offers the training, literature, and support to help your dreams become reality.

126

The materials offered include a complete line of pre blended mixes that meet a range of demands. These mixes can be purchased as separate ingredients as well, and blended on site. The mixes are accompanied by all of the water reducers, reinforcements, and other materials required for optimum strength and durability. Buddy offers a complete line of colors, including custom color matches for any color you can imagine, which are compatible not just with Buddy’s materials but with any cementitous system. The color is expanded with a line of glazes that can produce infinite effects and colors on hardened concrete. All of the tools necessary for polishing and finishing the concrete are available. And finally a comprehensive sealer offering that matches the right product for the project are available for DIYers to Professional Artisans.

If it pertains to artisan concrete, Buddy Rhodes has what you need.


PAVERS / STONES

Building a new house? Ready to give your current house a new look? Pavestone driveways add class and character. Pavers can be purchased in several different thicknesses to be best optimized for vehicular traffic.

Pavestone products are used in large commercial projects including multi-family dwellings, municipal and office buildings, parks, shopping centers and schools.


Retaining walls and freestanding walls add an element of design to an outdoor project. A grand entrance, dramatic garden views and designated outdoor living areas can be enhanced by creating terraced patios or flower beds.

Pavestone’s permeable pavers turn your poolside into a luxuri-ous space for entertaining, while enhancing safety and reducing maintenance. Steps can be implemented almost anywhere and they look great everywhere!

Pathways are a great way to join a driveway to a front entrance, a home to a patio, or simply for decorative purposes. Pathways can be created with pavers or with patio stones and look great combined with a retaining wall!

Use Pavestone Company’s Patio Design Ideas for great ways to create an outdoor living space for you and your family to enjoy. Paver patios are a fun way to add personality and charm to your yard.

DIVISIO

N3 .6

SURFACE PROTECTION / DUST CONTAINMENT

BUILDER BOARD™ WITH LIQUID SHIELD™

128

• Heavy-duty, water-resistant temporary floor protection.• Repels water, mud, paint and more.• Allows vapors to escape for maximum

breathability.• Tough enough to be driven on –

approximately 45 mil. thick.• Easy to install – lays fast and flat.• 1 Roll covers the same area as 10 sheets

of masonite.• A green product – 100% recyclable.• Use to gain USGBC LEED points.• Protects: Granite, Travertine, Marble,

Terrazzo, Stone, Colored Concrete, Tile, Wood, Carpet, Linoleum, etc.

• Clear, polyethylene film mat with tacky surface.• Designed to remove dirt from footwear.• 30 tabbed sheets for easy removal.• Sturdy, reusable board for any surface.• Non-skid backing holds securely to floor.• May be imprinted with your logo on white frame.• #DG30WM - 25.5” x 31.5”

STEP N PEEL™CLEAN MAT

#BLDLS3810038” x 100’ roll


BUILDER BOARD™ TAPE


DIVISIO

N5Metals


Stair Nosings

Safety Treads

BUY LOCAL

Comfortable and Safe StairsFor the safety reasons and for the comfort of usage, stair measurements are recommended to follow some guidelines:• The run length should be 9 inches (23 cm) or longer for enough foot

space.• The riser height should be 8.25 inches (21cm) or lower.• The nosing protrusion length should be 1.25 inches (3.2cm) or lower to

prevent tripping on the nosing.• The headroom is recommended to be 6’-8” (203cm) or higher.• The stair width is recommended to be 35 inches (89cm) or longer.• The height of the handrail, measured from the nose of the tread, is rec-

ommended to be between 34 and 38 inches (86 to 97cm).• The comfortable size of handrail diameter is between 1.25 and 2.68

inches (3.2 to 6.8cm).• Doors are normally not allowed to swing over steps. The arc of doors

Quick Reference forFraction to Decimal ConversionFraction Decimal1/16 0.0631/8 0.1253/16 0.1881/4 0.2505/16 0.3133/8 0.3757/16 0.4381/2 0.5009/16 0.5635/8 0.62511/16 0.6883/4 0.75013/16 0.8137/8 0.87515/16 0.938

STAIR NOSING

“Sure Step” Safety Stair NosingExtruded Base, Abrasive Filler • Impact Resistant

• Barrier-Free

• Anti-Slip Surface

• Choice of Color

• Economical

130

For Poured Concrete Stairs

TYPE 3511For Steel Pan Stairs

TYPE 9511 TYPE 9711

Anchor Options

For Concrete or Wood Stairs

TYPE 1511 extruded anchor

Easy-to-Install Renovation Treads

TYPE G4702

State of California Title 24 Safety Strip for the Visually Impaired

TYPE T-24H with holes for screws and fasteners TYPE T-24 with extruded anchor for

poured stairs

Gray

Black

Brown

Burgundy

Red

SafetyOrange

Buff

SafetyYellow

Green

Blue

COLOR CHART

Multi-Use Both Steel Pan and Poured Concrete

TYPE BF-211D TYPE BF-311D

Steel wing anchor furnished with nuts and bolts for assembly in field.

Cast on anchor integrally cast to underside. No field assembly required.

Tampin anchors for installation in existing concrete or terrazzo steps.



DIVISIO

N7Thermal & Moisture Protection


Waterproofing

Bonding Agent

Waterstops

Caulking Guns

WATERPROOFING

MEL-DRAIN™ – Rolled Matrix Drainage System

Used in conjunction with a total W. R. MEADOWS moisture protection system, MEL-DRAIN is the ideal choice for enhanced waterproofing protection of basement walls, plaza decks, earth-sheltered homes, commercial buildings, retaining walls, underground parking, site drainage, etc.FEATURES/BENEFITS• High flow capacity, without clogging/Relieves hydrostatic pressure buildup.• High compressive strength/Dependable, long life performance.• Easy to install; durable under jobsite conditions/Lower total installed

cost.• Chemically resistant to all naturally occurring soil conditions.• Wide variety of applications.• Provides added protection for waterproofing materials/Enhances

waterproofing performance.• Part of a complete W. R. MEADOWS moisture protection system/Worry-free, single-source solution.

MEL-PRIME™ – Water-Based AdhesiveUse MEL-PRIME W/B to simultaneously prepare and dustproof new, existing, vertical and horizontal surfaces in one easy, economical operation. Use MEL-PRIME W/B to condition all concrete surfaces to receive applications of MEL-DEK™, MEL-ROL®, and/or AIR-SHIELD™ from W. R. MEADOWS.FEATURES/BENEFITS• Ready to use.• Easy to apply/No harmful odors.• Provides durable, strong adhesion.• Compatible with full line of W. R. MEADOWS building envelope products.• Non-combustible.• VOC compliant.PACKAGING 1 Gallon (3.79 Liter) Can, 5 Gallon (18.9 Liter) Pail

132

MEL-ROL® – Waterproofing Membrane

MEL-ROL is a cost-effective answer to properly waterproof foundations, vertical walls, and below-grade floors in residential and commercial construction. It is equally effective for use as between-the-slab waterproofing on plaza decks, parking decks and structural slabs. Use it as a waterproofing membrane to isolate mechanical and electronic rooms, laboratories, kitchens and bathrooms. MEL-ROL offers positive protection when “wrapped around” major rapid transit, vehicular, utility and pedestrian tunnel projects. MEL-ROL can also be used on insulated concrete forms (ICF). FEATURES/BENEFITS• Provides cost-effective, flexible, versatile, dependable, positive

waterproofing protection against damaging moisture migration and the infiltration of free water.

• A quick and easy-to-apply system for maximum productivity.• Special membrane-to-membrane adhesion provides additional overlap

security.• Meets or exceeds the test requirements of all currently applicable specifications.• Components work together for positive waterproofing protection.• Handles with ease on the jobsite.SPECIFICATIONS• A.R.E.M.A.® Specifications Chapter 29, Waterproofing• ASTM D 570PACKAGING38.5” (977.9mm) wide x 62.5’ (19.1m) long, one roll per carton

MEL-ROL LM® – Liquid Waterproofing MembraneMEL-ROL LM can be used on new and remedial waterproofing applications on concrete or masonry block substrates. Since the formula is water-based, MEL-ROL LM can also be used on both ICFs and “green concrete” applications.FEATURES/BENEFITS• Waterproof – very low vapor permeability (perm rating).• Superior elongation – bridges minor

cracks; will not become brittle with age.• Fully bonded – water will not run beneath the membrane.• High solids, single-component, fast drying formulation – easy to apply;

low cost application equipment.• Cold-applied/water-based – will not adversely affect insulated forms

(ICFs) or various protection board options. Allows for application to damp or “green concrete.”

• VOC content is 0.0 g/L. Produces no harmful odors.• Easy application – no heating necessary. Eliminates fire hazards

associated with heating kettles. Apply with roller or airless sprayer.PACKAGING 5 Gallon (18.93 Liter) Pails55 Gallon (208.20 Liter) Drums (special order only)


WATERPROOFING /BONDING AGENT


MicroSeal IIReady to Use Clear Liquid Water Repellent for Concrete, Masonry and Cementitious StuccoMicroSeal II qualifies as a low solid coating with a VOC 65 g/l, ready-to-use, silane/siloxane emulsion designed to seal out water from new or existing unpainted concrete, stucco and masonry surfaces while maintaining vapor permeability.Benefits• Eliminates leakage caused by moisture saturation.• Reduces efflorescence and frost damage.• Allows substrate to breathe.• Preserves substrate color and texture (Test patch recommended).• Resistant to high alkalinity and ultraviolet rays.• Ready-to-use. No mixing required.• May be applied by spray, brush or roller.• Long life, warranted for ten years when properly mixed and applied.• Non-flammable, VOC 65 g/l.• 1-Year shelf-life.

Super BlockadeOne Component Cementitious Waterproof Coating for Concrete and MasonrySuper Blockade is a proprietary formulation of Portland cements, graded aggregates and chemical additives. The correct amount of co-polymer powder is pre-mixed in the bag, so only water is required to achieve consistent waterproofing of Portland cement surfaces.Benefits• Convenient. No liquid polymers to buy, inventory or handle.• Eliminates leakage caused by moisture saturation.• Prevents moisture damage such as efflorescence, spalling,

crumbling, and discoloration.• Mixes easily with mechanical mixer at slow speed.• Apply with masonry brush or bristle push broom.• Serves as final white or gray decorative surface as it protects.• Long term protection.• Eliminates need for concrete rubbing or sacking.• Foolproof waterproofing, eliminates mixing mistakes.

AcrylexLiquid Acrylic Adhesive AdmixtureAcrylex is a one component, water-base, non-yellowing acrylic polymer emulsion, used as an internal admixture for Portland cement mortars, cement plaster, stucco, and concrete mixes.Benefits• Improves tensile, flexural and compressive strengths when added to portland cement materials.• Increases adhesion and curing properties. • Increases water resistance.• Reduces shrinkage, cracking, and freeze/thaw damage.• Increases resistance to problems associated with high alkalinity.• VOC compliant.

DIVISIO

N7

WATERPROOFING

134

MULASTICOAT is a unique latex water based coating which forms an elastomeric waterproofing membrane with excellent bonding characteristics to most building materials.MULASTICOAT has a wide variety of waterproofing applications, including roof repairs, tank lining, water moats, reflection pools, shower pans, between slab membranes, etc.

AdvantagesP Low cost – minimum down time.P Ease of application.P Superior waterproofing.P Excellent bond strength.P High tensile strength and elastomeric properties.P Freeze-thaw resistant.P Water based – environmentally safe to use and

apply.

MULASTICOAT® “The Blue Stuff”

TEST METHOD RESULTSTensile Strength ........................... ASTM D2370 ............................... PSI 203Elongation ..................................... ASTM 2370 .................................. 1148%Tensile Bond Adhesion, PSI ........ ASTM C297 ................................. 162 CohesiveStatic Hydrostatic Pressure .......... ASTM C1306 ............................... Pass >45 PSIHydrostatic Head .......................... 12” Water/Film @ 40mil ............... Pass 96 hrs. / No EffectLow Temperature FlexibilityMandrel Bend ............................... ASTM D522 ................................. 1/2” Room Temp Pass............................................................................................................ 1” @ -5°F Pass............................................................................................................ 1/2” @ -5°F Pass

Multipurpose Elastomeric

Seamless Waterproofing

Membrane

AQUA PROOF is an elastomeric waterproofing material in a ready-to-use gallon can. This material is designed to waterproof new or existing concrete (or block) fountains, ponds, reflection pools, fish ponds, etc.

COLOR CHART

AdvantagesP Easy paint on.P Easy clean up.P Environmentally friendly.P Multiple color options.P Water based.P No special tools.

AQUA PROOFA Roll-on Waterproofing Membrane Used to Waterproof Fountains, Fish Ponds, Water Features, Etc .

Blue Dark Grey

Tan White

Grey


PVC WATERSTOPS


Ribbed with Center Bulb • • • Flat Ribbed • • Dumbbell with Center Bulb • • • Dumbbell • • Ribbed Tear Web • • • Base Seal • • Labyrinth •

Cons

tructi

onCo

ntrac

tion

Expa

nsion

Joint Type

Ribbed with Center Bulb Shapes are designed to accommodate movement in expansion joints. Ribbed with Center Bulb is extremely versatile and can be used in both working and non-working joints.

NOTE: The first waterstops featured a dumbbell design, but ribbed shapes provide a better seal.

Ribbed Shapes without center bulbs are suitable for construction or contraction joints where little or no movement will occur.

RB4316 STD. WT. 0.42 lbs./ft. HEAD PRESS. 65’

4”

3/16” 3/16” ID & 3/8” OD

RLB938 STD. WT. 2.65 lbs./ft. HEAD PRESS. 175’

9”

7/8” ID & 1-1/2” OD


6”

1/8”1/8”

3/16”

3/16” 3/8” 1/4”

RB938H STD. WT. 2.45 lbs./ft. HEAD PRESS. 175’

9”

1/2” ID & 1” OD1/8” 3/8”


9”

1/4” ID & 3/4 OD3/8” 1/2”

1/4” ID & 5/8” OD

RB6316A STD. WT. 0.92 lbs./ft. HEAD PRESS. 100’

6”

1/8”3/16” 5/16” ID & 9/16” OD


6”

1/8”3/8”3/16” 1/4” ID & 11/16” OD

RB638H STD. WT. 1.60 lbs./ft. HEAD PRESS. 125’

6”

1/8”5/8”3/8” 5/16” ID & 7/8” OD


6”

3/4”

9/32” 13/32” 3/16” ID & 5/8” OD

RB714B STD. WT. 1.28 lbs./ft. HEAD PRESS. 100’

7”

1/2” 1/4” 1/8”5/8” ID & 1” OD


9”

3/16” 1/4” ID & 1/2” OD


9”

3/16” 1/4” ID & 3/4” OD 1/8”3/8”

7/8”

R4316T STD. WT. 0.43 lbs./ft. HEAD PRESS. 65’

4”

3/32” 3/16” 1/8”

R6316 STD. WT. 0.84 lbs./ft. HEAD PRESS. 75’

6”

1/8” 3/16” 7/16”


6”

1/8” 3/8” 1/4”


6”

1/8” 3/8” 5/8”


9”

1/4” 3/8” 1/8”


9”

1/8” 3/8” 5/8”


12”

1/2” ID & 1-1/4 OD7/8” 1/2” 1”

SELECTING A PVC WATERSTOPWhen cast-in-place concrete members have joints that will be subject to water seepage or hydrostatic pressure, Vinylex PVC Waterstop should be installed. In all below grade con-struction and in any surface structure where it is necessary or desirable to contain or exclude moisture or water under pressure, Vinylex Waterstop provides a simple, effective and positive seal.Vinlyex PVC Waterstop is offered in several shape types to accommodate a wide range of applications, including construction, contraction and expansion joints. The Selection Guide offers general references for the most popular shapes.Most shapes are available in several widths and thicknesses. Generally, width and thick-ness will dictate how much hydrostatic head pressure the waterstop can withstand and when applicable the size of the centerbulb or tearweb will dictate allowable joint movement.

Vinylex PVC Waterstop is formulated using only virgin resins and is manufactured to satisfy the requirements of these industry standards: • Corps of Engineers CRD-C-572• Bureau of Reclamation• Various state and federal agencies.

Physical Properties Typical of PVC Waterstop Test Method Value

Tensile Strength ASTM D-638 2000 PSI Min.

Ultimate Elongation ASTM D-638 300% Min.

Specific Gravity ASTM D-792 1.35

Stiffness in Flexure ASTM D-747 600 PSI Min.

Hardness Shore A15 ASTM D-2240 78±3

Low Temperature ASTM D-746 Pass Brittleness @-35°F

Water Absorption ASTM D-570 .15% Max.

Tensile Strength After Accelerated CRD-C-572 1850 PSI Min. Extraction

Elongation After Accelerated CRD-C-572 300% Min. Extraction

Alkali Resistance • Weight change CRD-C-572 .20% Max. • Hardness change 2 Pts. Max.

Tear Resistance ASTM-D624 300 lb./in. Min.

SHAPE TYPE

DIVISIO

N7

PVC WATERSTOPS

136

Ribbed with Tear Web Shapes will accom-modate differential or significant movement in expansion joints. The Tear Web is uniquely designed to detach at a strategic point, allowing the U-shaped bulb to deform as needed without stressing the waterstop material.

Dumbbell Shapes without center bulbs are suitable for construction or contraction joints where little or no movement will occur.

Base Seal Shapes are highly suited to slabs-on-grade and some below grade wall joints. Base Seal Shapes are easy to install.

Labyrinth Shapes are typically used in ver-tical joints anticipating little or no movement. Labyrinth does not require split formwork.

Split Shapes are designed to eliminate split formwork, but have limited practical applica-tions. Split shapes are for vertical applications where no directional changes or intersections will be required.

RET638 is designed for retro-fit applications where new concrete meets an existing struc-ture. It is mechanically fastened to the existing structure with batten bars, anchor bolts and an epoxy gel leaving the extended leg to be embedded in new concrete.

W12 is offered to meet the design requirements of Caltrans for bridge deck joints.

Dumbbell with Center Bulb Shapes are designed to accommodate movement in expansion joints.

TWB618 STD. WT. 0.78 lbs./ft. HEAD PRESS. 65’

6”

1/8” 3/8”3/4”

D4316 STD. WT. 0.47 lbs./ft. HEAD PRESS. 65’

4”

3/16” 3/8”

RSB4316 STD. WT. 0.50 lbs./ft. HEAD PRESS. 65’

4”

1/16” 3/16” 3/32”7/16” OD


6”

3/16” 3/32”5/8” OD


6”

3/8” 3/32”

3/16”

5/8” OD


9”

3/8” 3/32”

3/16”

5/8” OD

DS638 STD. WT. 1.49 lbs./ft. HEAD PRESS. 125’

6”

3/4” 3/8”3/8”

3/16”

DS938 STD. WT. 2.20 lbs./ft. HEAD PRESS. 150’

9”

3/4” 3/8”3/8”

3/16”

BS618D STD. WT. 0.83 lbs./ft. HEAD PRESS. 100’

6”

9/16”1/8”

BS718 STD. WT. 0.79 lbs./ft. HEAD PRESS. 75’

7”

7/16”1/8” 7/16”

BS718E STD. WT. 1.21 lbs./ft. HEAD PRESS. 100’

7”

1/2”

9/16”

3-1/8”

1/8”1-1/4”

BS9532 STD. WT. 1.53 lbs./ft. HEAD PRESS. 100’

9”5/32”

3/4”

BSE9532 STD. WT. 1.85 lbs./ft. HEAD PRESS. 100’

9”5/32”

3/4”

U912 STD. WT. 4.64 lbs./ft.

8”

9”

3-1/2”

3/4”TWB918 STD. WT. 1.00 lbs./ft. HEAD PRESS. 100’

9”

1/8” 3/8”

3/4”

TWB938 STD. WT. 3.78 lbs./ft. HEAD PRESS. 150’

9”

3/8” 3/4”2-1/2” 1-1/8”

DB614 STD. WT. 1.20 lbs./ft. HEAD PRESS. 100’

6”

3/8” 1/4” 3/4” ID & 1-1/8” OD

DB938 STD. WT. 3.10 lbs./ft. HEAD PRESS. 150’

9”

1” 3/8” 3/4” ID & 1-1/2” OD

DLB938 STD. WT. 3.70 lbs./ft. HEAD PRESS. 150’

9”

15/16”3/8”

2” ID & 2-3/4” OD


6”

3/16” 3/8”


6”

1/4” 5/8”


6”

3/8” 3/4”


9”

3/8” 3/4”

D938LB STD. WT. 2.55 lbs./ft. HEAD PRESS. 150’

9”

3/8” 1”

3-1/4”

3/16”1-5/8”

KS412 STD. WT. 1.24 lbs./ft. HEAD PRESS. 50’

4-7/16”

3/16”1-5/8”


6-1/4”

1/4” 1/4”

1/4”1-5/8”

1/2”

RET638 STD. WT. 2.83 lbs./ft.

6”

3/32”

3-1/16”

1/4” x 2-1/4”ss sleeve exp. bolt

304 xx batten bar

1/2” 3/8”

W12 STD. WT. 1.10 lbs./ft.

5-1/4”

3/4”

3-1/8”1/8”1/8”

1/8”


SPECIAL SHAPES


WATERSTOPS


Mastic Waterstop for Concrete Construction JointsUltraStop® is a single component; self-sealing mastic waterstop that pre-vents moisture from penetrating non-moving joints in concrete construction.Fast and easy to install in all working temperatures, UltraStop requiresno special labor skills. UltraStop provides a lasting, watertight bond toconcrete surfaces.Advantages• Easy to install, requiring no specialized labor.• Applies in most weather conditions and temperatures.• Available in rolls to speed installation and minimize splicing.• Stays tacky and bonds to concrete with UltraStop Primer Adhesive.• No mechanical fasteners or split forming required.• Requires minimum concrete cover and does not create pressure which

could potentially spall the concrete.UltraStop is not an expansion joint material and should not be used as one. Expansion joints must be sealed with a conventional waterstop designed to accommodate movement. Vinylex Waterstop & Accessories has alternative waterstop materials suitable for expansion joints. Contact our technical department for more information.Packaging: (6) 16’-8” rolls per carton for a total of 100 ft. per carton.

Typical Applications• Storage tanks• Culverts• Pipe and penetrations• Retaining walls• Slabs-on-grade• Foundations

No. KK585

Ultrastop Primer Adhesive is required to assure proper installation. Additional mechanical fasteners may be

required for vertical or overhead applications.

Technical DataProperty Test Method Required Limits Typical ValuesSpecific Gravity ASTM D 71 1.15 to 1.50 1.22 to 1.30Flash Point ASTM D 92 350°F min. 450°FFire Point ASTM D 92 375°F min. 475°FAsh Inert Materials ASTM D 482 25% min. 35%Volatile Material ASTM D 6 3.0% max. 1.2%

Forming RequirementsUltraStop is installed after the form is stripped from the first pour and before the second pour is made. Therefore, splitting of the form is not required. The 3/4” x 1” cross sectional profile may be installed in a formed groove of appropriate dimensions or directly to a plain flat concrete surface. The use of a formed groove reduces the chance of the UltraStop shifting and being displaced when the second concrete pour is made. The non-expansive nature of UltraStop allows installation outside of the reinforcing steel with minimal concrete cover.

1”

3/4”

®

DIVISIO

N7

CAULKING GUNS

138

• 10:1 Thrust ratio.• Seal puncture tool/spout cutter.• Ladder hook.• E-Z Load front cap.Model 125: 1/4 gal., 6/case, 16 lbs.

535-XSP – Multi Ratio Applicator

• 26:1 Thrust ratio.• Easily converts in just seconds with snap in/snap out push disks.• Patented cartridge stabilizing plate for extra cartridge support.• Extra durable, heat treated piston rod.• Precision sintered friction plate.• Easy release star-burst reverse gripping plate.• Hammered finished alloy handle with comfort grip.Model 535-XSP: 6/case, 34 lbs. 300ml x 300ml; 300ml x 150ml; 300ml x 75ml; 150ml x 150ml; 150ml x 75ml

U.S. Patents 5,197,635, 6,176,398, 6,290,101

FPT-02 – Follow Plates (2 Gal.)

• Neoprene seal can be used with straight and tapered pail. • For 2” diameter barrel bulk gun.• 2 Gal. diameter – 8.5” with 1/2” neoprene seal.• No threaded barrel docking (air tight o-ring).

624-GTS / 632-GTS – Bulk/Sausage – Deluxe Hex Rod Models

632-GTS

624-GTS

655-XSP – Multi Ratio Applicator

• 26:1 Thrust ratio.• Easily converts in just seconds with snap in/snap out push disks.• Patented cartridge stabilizing plate for extra cartridge support.• Extra durable, heat treated piston rod.• Precision sintered friction plate.• Easy release star-burst reverse gripping plate.• Alloy handle with comfort grip.Model 655-XSP: 6/case, 34 lbs. 600ml x 600ml; 600ml x 300ml

U.S. Patents 5,197,635, 6,176,398, 6,290,101

125 – Hex Rod Parallel Frame

• Adjustable thrust ratio (10:1 or 7:1).• Seal puncture tool/spout cutter.• Ladder hook.• E-Z Load front cap.Model 114D: 1/10 gal., 12/case, 19 lbs.

U.S. Patents 5,381,931, 5,788,126

114D – Dripless on Demand Parallel Frame


• Adjustable thrust ratio (14:1 or 7:1).• Patented Gator Trigger™ comfort grip.• Rotating barrel with lock.• Ring cap and 3 cones included.• OV-25 oval nozzle included (1/2”).• Leather cups standard with floating sausage cup.• Dual hytrel cup standard on Model 632C-GTS.• Effective Trigger Grip (ETG) for longer rod life.• Optional carrying case available. • Replacement parts available.Model 624-GTS: 6/case, 22 lbs., 24 oz. Bulk, 10 oz. and 20 oz. Sausage PacksModel 632-GTS: 6/case, 26 lbs., 32 oz. Bulk, 10 oz., 20 oz., and 30 oz. Sausage Packs

U.S. Patents 5,381,931, 6,176,398, 7,398,899

COVERAGE CHART


JOINT WIDTH VS. DEPTH With Concrete, Masonry, Stone: If Joint WIDTH is: Sealant DEPTH should be: Min. Max.

1/4” (min. suggested) 1/4” 1/4”

Over 1/4” to 1/2” 1/4” Equal to WIDTH

Over 1/2” to 1” 1/2” Equal to WIDTH

Over 1” to 2” 1/2” 1/2 of WIDTH

Over 2” (Consult sealant supplier for recommendation)

Ratio of Film Thickness and Coverageof Materials Either of Plastic or Liquid Consistency

Based Upon 231 cu . in . to One Gallon

Thickness of film: (3/1000th inch). 1.6 is the factor (reducing cubic content of gal.). Divide 1.6 by thickness in inches to get coverage per gal.

Thickness Coverage (Sq . Ft ./ Gal .) 1/2 inch (500 mils) 3.2 Ft2/gal 1/4 inch (250 mils) 6.4 Ft2/gal 1/8 inch (125 mils) 12.8 Ft2/gal 1/16 inch (62.5 mils) 25.6 Ft2/gal 50 mils 32.1 Ft2/gal 30 mils 53.5 Ft2/gal 20 mils 80.2 Ft2/gal 10 mils 160.4 Ft2/gal 8 mils 200 Ft2/gal 5 mils 300 Ft2/gal 1 mil 1604 Ft2/gal 1 inch = 1000 mils

POOR

BETTER

IDEAL

LENGTH/AREA EQUIVALENTSMetric Equivalents of Length*

ENGLISH TO METRIC METRIC TO ENGLISH 1 inch = 25.4 mm 1 mm = 0.03937 in. = 2.54 cm = 0.003281 ft. = 0.0254 m = 0.001094 yd. 1 foot = 304.800 mm 1 cm = 0.3937 in. = 30.480 cm = 0.03281 ft. = 0.3048 m = 0.01094 yd. 1 yard = 91.4402 cm 1 meter = 39.37 in. = 0.9144 m = 3.2808 ft. = 0.03914 km = 1.0936 yd. 1 rod = 502.9211 cm = 0.1988 rd. = 5.0292 m = 0.04971 chain = 0.005029 km = 0.036214 mi. 1 chain = 2011.68 cm 1 kilometer = 3280.833 ft. = 20.1168 m = 1093.611 yd. = 0.02012 km = 198.838 rods 1 mile = 1609.344 m = 49.7095 chain = 1.6093 km = 0.6214 mi.

*A subscript after a figure indicates the number of times it is repeated.Thus 0.038 = 0.0008.

Metric Equivalents of Area* ENGLISH TO METRIC METRIC TO ENGLISH 1 cir. mil. = 0.035067 sq. mm 1 sq. mm = 1,973.55 cir. mils 1 sq. in. = 645.163 sq. mm = 0.001550 sq. in. = 6.5416 sq. cm = 0.0410764 sq. ft. = 0.036462 sq. m = 0.051196 sq. yd. 1 sq. ft. = 92,903.41 sq. mm 1 sq. cm = 0.1550 sq. in. = 929.0341 sq. cm = 0.001076 sq. ft. = 0.0929 sq. m = 0.031196 sq. yd. = 0.05929 hectare 1 sq. meter = 1,549.9969 sq. in. = 0.07929 sq. km = 10.7639 sq. ft. 1 sq. yd. = 836,130.74 sq. mm = 1.1960 sq. yd. = 8,361.307 sq. cm = 0.002471 sq. rod = 0.83613 sq. m = 0.032471 acres = 0.04836 hectare = 0.063861 sq. mi. = 0.06836 sq. km 1 hectare = 107,638.7 sq. ft. 1 sq. chain = 404.686 sq. m = 11,959.85 sq. yds. = 0.04047 hectare = 24.710 sq. chns = 0.034047 sq. km = 2.4710 acres 1 acre = 4,046.86 sq. m = 0.003861 sq. mi. = 0.4047 hectare 1 sq. km = 10,763,867.36 sq. ft. = 0.004047 sq. km = 1,195,985.26 sq. yds. 1 sq. mile = 2,589,998. sq. m = 2,471.050 sq. chns = 259.0 hectare = 247.1045 acres = 2.590 sq. km = 0.3861 sq. mi.

DIVISIO

N7

COVERAGE CHART

140

SEALANT COVERAGE CHARTCoverage Chart for a Five Gallon Pail (1155 cu. in.)

Linear feet per 5 gallon pail 1/8” 1/4” 3/8” 1/2” 5/8” 3/4” 7/8” 1” 1/8” 6160 3080 2050 1540 1230 1025 880 770 1/4” 1540 1025 770 565 510 440 380 3/8” 680 680 510 410 290 255 1/2” 385 305 255 220 190 Depth

Coverage Chart for a One and 1/2 Gallon Unit (346.5 cu. in.)Linear feet per 1-1/2 gallon unit

1/8” 1/4” 3/8” 1/2” 5/8” 3/4” 7/8” 1” 1/8” 1848 924 615 462 369 308 264 231 1/4” 412 308 231 185 153 132 116 3/8” 204 153 123 102 87 77 1/2” 116 92 77 66 57 Depth

Coverage Chart for a 10.3 fl. oz. Cartridges (18.6 cu. in.)Linear feet per cartridge

1/8” 1/4” 3/8” 1/2” 5/8” 3/4” 7/8” 1” 1/8” 99 49.5 33 24.5 20 16.5 14 12.5 1/4” 24.5 20 12.5 10 8 7 6 3/8” 11 8 6.5 5.5 4.5 4 1/2” 6 5 4 3.5 3 Depth

Quantities of Materials Required for Caulking or Sealing Joints and Openings

LINEAL FEET PER GALLON OF SEALANTS FOR VARIOUS JOINTS Joint 1/8 3/16 1/4 5/16 3/8 7/16 1/2 5/8 3/4 7/8 1 1-1/8 1-1/4 1-3/8 1-1/2 1/8 1232 820 616 494 410 350 306 246 205 176 154 136 123 112 102 3/16 547 404 328 274 234 205 164 133 116 102 91 82 74 68 1/4 308 246 205 176 154 123 102 88 76 68 61 55 50 5/16 196 164 140 122 98 82 70 61 54 49 44 41 3/8 136 116 102 82 68 58 51 45 41 37 34 7/16 100 87 72 57 50 43 39 35 32 29 1/2 77 61 51 44 38 34 31 28 25 5/8 49 41 35 31 27 24 22 19 3/4 34 29 25 23 20 18 17 7/8 25 22 19 17 16 14 1 19 17 15 14 12 1-1/8 15 13 12 11 1-1/4 12 11 10 1-3/8 10 9 1-1/2 8Divide answer into total joint footage to determine number of gallons required for job.One (1) U.S. gallon = approximately 12 ea., 10.1 oz. cartridges.



SafetySafety & Personal Protection Equipment


Harnesses / Lanyards

Eye Protection

Hard Hats

Safety Vests

Rain Suits

Boots & Gloves

Ear Plugs

Face Masks

Hydration

Bar Guards

Floodlights

Outdoor Extension Cords

Tie-Downs

Beverage Coolers

FALL PROTECTION

5,000 Lb., 3/4” RB (Removable Bolt) Concrete Anchor#7440

142

• Designed for use in cured, existing concrete.• Easily installed with simple tools.• Can be relocated and used repeatedly.• Ideally suited for construction and maintenance applications.• Meets the requirements of OSHA 1926 and ANSI Z359.1.

Journeyman Flex 3-D Full Body Harness#7035BX (Small) #7035BM (Medium)#7035BL (Large) #7035BXL (X Large)#7035B2X (2X) #7035B3X (3X)

Tradesman+ 1-D Full Body Harness#7008B (UniFit) #7008BX/2X (Dual Size XL/2XL)

ViewPack 6’ Shock Absorbing Lanyard#8256

Rebar Positioning Assembly#8250

• “Y”-leg lanyard for fall arrest and 100% tie off.• Leg expands from 4-1/2’ - 6’ (minimize tripping hazard).• Internal shock absorber is designed to limit arrest forces to 900 lbs.• Lightweight – an end-user favorite.• Anchorage end rebar hook has a 2-1/4” gate opening and allows a

broader range of connections.

ElasTech 6’ Shock Absorbing Lanyard#8240Y3

• 2-1/4” Gate swivel rebar hook with two locking snap hooks.• 9/32” Grade 80 chain complies with the toughest standards in the business.• To be used for work positioning with a qualified 3-D Full Body Harness.

DuraTech 10’ Web Self-Retracting Device#82710SC1

• Single-leg SRD.• 10’ Working length.• Glass reinforced polycarbonate housing.• Impact resistant over molded side walls.• Steel Carabiner w/Captive Pin.• Steel Snap Hook.• Integral Swivel Eye – reduces twisting.

Contractor LE 30’ 7/32 Galvanized Steel CableRetractable Lifeline#727630LE

• May be used as a traditional SRD for overhead anchorage options or in below harness D-ring anchorage conditions. • 7/32 Galvanized steel cable for added cut resistance. • Dual energy absorber system – internal inertial brake and external shock pack. • Designed to reduce the risk of cable failure

when contacting an edge during a fall event.• ANSI Z359.13 compliant external energy absorb-

er to reduce impact forces during edge contact in a fall event.

• Certified as ANSI Z359.14-2014 Leading Edge compliant.

• Rugged 1” polyester webbing provides extreme UV resistance.

• Exclusive ViewPack™ design combines protection of labels with view-window for inspection of internal energy absorber.

• Integral label cover to protect warning and inspection labels.

• Tear-away absorber design limits fall forces to 900 lbs. or less.

• Forged aluminum alloy D-rings, torso adjusters and belt buckles.

• Premium breathable padded air mesh shoulder yoke with integral non-slip dorsal D-ring adjustment.

• 18” Contoured stitched-down leg pads. • 6” Premium torso-sewn waist support

positioning pad for construction belted harnesses.

• Quick connect Visi-lock chest buckle.

• Deluxe breathable padded air mesh shoulder yoke with non-slip dorsal D-ring adjustment.• Quick connect Visi-lock chest buckle.• Low-profile spring-tension torso adjusters.• 6” Torso-sewn waist support positioning pad

for construction belted harnesses.• Complies with ANSI Z359.11-2014.


EYEWEAR

ReclusSR116LENS• Smoke lenses block bright sun rays.• Perfect tint for bright light conditions.• Block 99.9% of UV rays.FRAME• Sleek, medium-size frame.• Flexible and durable.• Soft TPR nose pads and temple tips.


KazbekTSKAP218LENS• Polarized Aqua Precision Blue Mirror.• Polarizing filter reduces glare.• Block 99.9% of UV rays.FRAME• Aggressive, traditional design.• Flexible and durable.• Soft TPR nose pads and temple arms.

Brazeau TXB236LENS • Polarized Smoke.• Polarizing filter reduces glare.• Block 99.9% of UV rays.FRAME • Modern wrap-around design.• Flexible and durable with matte finish.• Foam nose pads for comfort.

Brazeau DesignerXB116-SLENS • Smoke lenses block bright sun rays.• Perfect tint for bright light conditions.• Block 99.9% of UV rays.FRAME • Modern wrap-around design.• Flexible and durable with skull design.• Foam nose pads for comfort.

Safety

WORKPLACE SAFETY

144

Safety Vests • Florescent orange or lime green. • Ideal for construction, schools and utilities. • Lightweight, knitted polyester. • Wide mesh style is cool and comfortable, weighing only four ounces. • Available with or without reflective stripes.

Buckle Over Boots • Constructed of premium ozone resistant rubber.• Non-corrosive buckles, stretch-net cotton lining and self-draining gusset. • Fits over most work shoes and boots.• Available in 4-buckle 11” or 5-buckle 14” styles. Sizes 7-15.

Black Polyurethane and PVC Boots • Provides excellent protection in conditions that require a high degree of chemical resistance. • Non-slip, cleated safety sole with a steel shank. • Good choice for chemical plants, oil rigs and refineries, mining or food processing. • Available in either plain or steel toe.

PVC/Polyester Rain Suits • PVC laminated to polyester interior. • Double lapped heat welded construction. • Non-conductive hardware. • Raglan sleeves. • Jacket has inner storm fly. • Take up snaps at cuff. • Bib overalls available in plain or fly front. • Rain coat has two patch pockets and detachable hood.

Ear plugsComfortable hearing protection for your entire workforce!• High-quality hearing protection products that are lightweight, comfortable and easy to use for worker protection, in a wide variety of industrial applications. • Soft polymer foam, PVC foam, bright high visibility colors, taper fit and available in uncorded and corded.

MasksExcellent worker protection, lightweight design. The economical respirator is excellent for light and general duty dust applications. Adjustable nose clip makes it cool and comfortable with a custom fit and secure seal. • Use for grinding, sanding, sweeping, bagging, woodworking, foundries and other dusty operations.

Gloves• Full feature gloves for heavy-duty applications such as foundry, petrochemicals, agriculture, refining, forestry, automotive, mining and construction.• Leather palm gloves with striped canvas back and matching rubberized safety cuff.• Large black PVC glove fully coated with smooth or rough finish palm, cotton jersey liner or cotton interlock liner, sanitized and knit wrist available.

HydrationPrevent dehydration, hypothermia and muscle exhaustion duringprolonged physical exertion. Prevent heat-stress injuries before they occur with electrolyte replacement drinks specially created for the high heat-stress environment of the industrial workplace.Help maintain peak performance!

Hard Hats • Vents on top of hard hat increase air

circulation, keeping your head cool and comfortable.

• Features a 4-point woven nylon suspension, short peak and

low profile. • Meets ANSI/ISEA Z89.1, Type 1,

Class C requirements.


REBAR CAPS


n Approved by California OSHA #C1718AG and OSHA 1723AG.n Complies with Federal OSHA 701 (b).n Federal OSHA has ruled that if cover is in compliance with Cal OSHA, then it

conforms to Fed. 701 (b).n Made of engineered high-impact plastic.n 16-Square inch top surface area aids in protection.n Fits a range of diameters.n Self-centering formed steel insert seats cover perpendicular to rebar.

Cat # Fits Rebar Size DISC-10 #3 thru #7 DISC-10-USA* #3 thru #7 HH-M #7 thru #11 HH-M-USA* #7 thru #11 HH-L #11 thru #14

*Made in USA

DISC-10

HH-M / HH-M-USA

DISC-10-USA

IMPALEMENT PROTECTION

FLOODLIGHTS / EXTENSION CORDS

OUTDOOR EXTENSION CORDS

1201

Cat . # Lgth . Gauge Type Jacket Color1650 50’ 16/3 SJTW Vinyl Orange1201 100’ 12/3 SJTW Vinyl Yellow93185 50’ 12/3 SJTW Vinyl Yellow93181 100’ 12/3 SJTW Vinyl Yellow

POWER FLEX EXTENSION CORDS

Plugs Connectors

L5-20P

5-15P

5-15R

L5-20R

FLOODLIGHTS

5250

SPECIALTY QUARTZ FLOODLIGHT

LED STUBBY LIGHTS

• 5” diameter magnetic base provides up to 200 lbs. of holding power.

• On/Off switch on all units.• Vinyl cover on magnet protects surface to which it is attached.• 8’ 16/3 SJTW power supply cord.

• 50 Watt.• 3,800 Lumen.• Heavy-Duty Stubby Light.

Cat . # Light Hght . Lbs .5050 1- Heavy-Duty 10” 105050

Safety

TIE-DOWNS

• Multiple mounting styles to fit almost any rack.• Bolted or welded to your ladder rack. Always ready where and when

you need it.• Holds on when rope and rubber cords fail, never knotted or lost.• Safely secures pipe, ladders, lumber and most construction materials.• Polyester strap is UV protected and water resistant. Great in all climate conditions.• Yellow-zinc plated steel frame.• 8 Ft. polyester strap with Double J wire hook.• Strong, 500 lb. Static Load Rating per unit.

Rack-Strap Tie-Downs for Trucks and Vans

146

Rack-Strap RS1Right Angle Mounting Bracket for Square Tubing and Angle Iron

• Fits the following racks: - Any rack made of square or rectangular tubing 1” x 1” or larger - Adrian steel full-size perimeter van racks - Cross tread truck racks - Truck rack and accessories truck and van racks - Weather Guard truck racks and Safari van racks and many more.

Rack-Strap RS2Curved Mounting Bracket for 1-7/8” O.D. Round Pipe

• Fits the following racks: - Rack-IT truck racks - Sure-Fit truck racks and many more.

Rack-Strap RS10Universal Strap Replacement Kit


BEVERAGE COOLERS

Cup Dispensern Fits all Igloo 3-, 5- and 10-gallon beverage coolers equipped

with a cup-dispenser bracket.n Holds one full sleeve of 4-4½ oz. cone cups.

Industrial Beverage CoolersThe oasis of hydration!n Cooler maintains ice for 3 days at 90°F!n UV inhibitors protect against sun damage.n Pressure-fit lid won’t trap dirt/mold.n Front push-button spigot is easy to access when wearing

gloves on a work site.Bracket for Cup Dispenser

#9514

Cooler Spigot

#9590

#8243

4.25-oz. Rolled-Rim Replacement Cups

#9346


Tools &Equipm

ent

Tools & Equipment


ROSEBURROUGH TOOL, MFG

Power Trowels & BladesRammers & Plate Compactors

Soff-Cut Saws & BladesConcrete Vibrators

Trash PumpsRebar Cutters & Benders

Demolition & Rotary HammersImpact Drivers & Angle Grinders

Wet/Dry VacuumsHammer Bits & Hammer SteelFinishing Trowels & Screeds

Hand Floats & Bull FloatsEdgers & Groovers

Shovels & MixersBrooms & Brushes

Measuring & Marking ToolsLevels & Calculators

Pressure Washers & Water HosesWheelbarrows

Sledges & Hammers

WALK-BEHIND TROWELS

148

MQ is the undisputed leader.

MQ blades and pans

B46H90 (Shown with QXH QuickPitchTM handle)Honda GX270Centrifugal Clutch60-130 RPMB46S90Subaru EX27,Centrifugal Clutch60-130 RPMJ36H55 (Shown w/Optional SXH Standard handle)Honda GX160Centrifugal Clutch60-115 RPMJ36S60Subaru EX17Centrifugal Clutch60-115 RPM

Anti-vibration handle foroperator comfort

Ergonomic throttle control

Safety shut-off switch

Optional QuickPitch blade adjustment

Standard lifting bail

Fully enclosed belt guard

Heavy-dutycentrifugal clutch

Optimal balance forsmooth finishing

Stabilizer ring

Tough, long lasting gearbox

Durable spider assembly

Access panel

Heightadjustablehandlebar

Operating Shipping Model HP (kw)* Motor Clutch RPM Weight lb. (kg) Weight lb. (kg) J-Series - 36-inch (914mm) Guard Ring J36H55 4.8 (3.6) Honda Centrifugal 60-115 182 (82) 200 (91) J36S60 5.7 (3.6) Subaru EX17 Centrifugal 60-115 182 (82) 200 (91) B-Series - 46-inch (1170mm) Guard Ring B46H90 8 (6.0) Honda Centrifugal 60-130 263 (119) 285 (129) B46S90 9 (6.7) Subaru EX27 Centrifugal 60-130 263 (119) 285 (129)*Engine power ratings are calculated by the individual engine manufacturer and the rating method may vary among engine manufacturers. Multiquip Inc. and its subsidiary companies makes no claim, representation or warranty as to the power rating of the engine on this equipment and disclaims any responsibility or liability of any kind whatsoever with respect to the accuracy of the engine power rating. Users are advised to consult the engine manufacturer’s owners manual and its website for specific information regarding the engine power rating.

QXH QuickPitch™ handleA patented spring-loaded designenables the operator to reactrapidly to changing concrete conditions. Blade pitch isincreased or decreased in 1/8”increments by moving the latchinglever back and forth.

SXH Standard handleA favorite of contractors whoprefer to have infinite bladepitch control. The large knobmakes it easy to increase ordecrease blade pitch to thedesired angle.

B46H90

J36H55

MQ Whiteman blades are made of heat-treated trowel steel, formulated to our specifications for maximum wear resistance and long life. Our blades are manufactured with additional rivets for greater uniformity and torsional strength. This increases machine stability and produces a smoother, flatter finish. Enduro Blades use heavier gauge steel to achieve up to 50% longer life than conventional trowel blades. They are ideal for heavier walk-behind trowels and ride-on trowels. Quick Change Blades offer a simple, fast alternative to bolt-on blades. A reusable mounting bar and channel mount blade system allows replacement of blades in minutes without the use of tools. See next page for sizes.

Trowel handles sold separately unless otherwise noted. All models factory equipped with combination blades.


BLADES & PANS


Trowel Blades and Pans Model Blades for 24” Diameter Rotors (.075 steel thickness) Walk-Behind Ride-On C244 Combo Blade 5” x 9.25” x Blades for 30” Diameter Rotors (Finish .062”; Combo .075” steel thickness) F300 Finish Blade 6” x 10.5” x C334 Combo Blade 8” x 10.5” x Blades for 36” Diameter Rotors (Finish .062”; Combo .075” steel thickness) C844 Combo Blade 8” x 14” x C844R Combo Blade 8” x 14” x CL954F Float Blade 10” x 14” x x F900 Finish Blade 6” x 14” x Quick Change Blades for 36” Diameter Rotors (Finish .062”; Combo .075” steel thickness) QB1857 Blade Mounting Bar, One (1) required per trowel arm x x QC1871 Combo Blade 8” 14” x QF1872 Finish Blade 6” x 14” x QS1869 Snap Pin, Two (2) required per trowel arm x x Enduro Blades for 36” Diameter Rotors (Finish .092”; Combo .092” steel) C10844 Combo Blade 8” x 14” x F10900 Finish Blade 6” x 14” x Enduro-Quick Change Blades for 36” Diameter Rotors (Finish .092”; Combo .092” steel thickness) QC10871 Combo Blade 6” x 14” x QF10872 Finish Blade 8” x 14” x Blades for 46/48” Diameter Rotors (Finish .062”; Combo .075”; Float 12 G/.105” steel thickness) C464 Combo Blade 8” x 18” x C464R Combo Blade 8” x 18” x CL444F Float Blade 10” x 18” x x F400 Finish Blade 6” x 18” x Quick Change Blades for 46/48” Diameter Rotors (Finish .062”; Combo .075” steel thickness) QB1856 Blade Mounting Bar, One (1) required per trowel arm x x QC1873 Combo Blade 8” x 18” x QF1874 Finish Blade 6” x 18” x QS1869 Snap Pin, Two (2) required per trowel arm x x Enduro Blades for 46/48” Diameter Rotors (Finish .092”; Combo .092” steel thickness) C10464 Combo Blade 8” x 18” x F10400 Finish Blade 6” x 18” x RC818 Reversible Combo Blade 8” x 18” x Enduro-Quick Change Blades for 46/48” Diameter Rotors (Finish .092”; Combo .092” steel thickness) QC10873 Combo Blade 8” x 18” x QF10874 Finish Blade 6” x 18” x Blades for 48” Diameter 6-Blade Rotors (Finish .075”; Combo .075” steel thickness) F616 Finish Blade 6” x 16” x C8160 Comb Blade 8.125” x 16” x Enduro Blades for 48” Diameter 6-Blade Rotors (Finish .092”; Combo .092” steel thickness) F10616 Finish Blade 6” x 16”, 48” x C10816 Combo Blade 8.125” x 16” x RC816 Reversible Comb Blade 8.125” x 16” x Enduro Blades for 60” Diameter Rotors (Finish .092”; Combo .092” steel thickness) C11997 Combo Blade 8” x 23” x F11990 Finish Blade 6” x 23” x Model Float Pan Description 20646 Latch Pin for Float Pans x x 21550 24”, 4-Blade Flat Pan x 2870 36”, 4-Blade Flat Pan w/block x 2871 46”, 4-Blade Flat Pan w/block x 11032 36”, 4-Blade Superflat Pan x 11017W 46”, 4-Blade Superflat Pan x 12271 46”, 4-Blade Flat Pan x x 12272 46”, 5-Blade Flat Pan x 12093W 46”, 5-Blade Superflat Pan x 32026W 46”, 6-Blade Superflat Pan (HTXD6I only) x 32608W 46”, 6-Blade Superflat Pan (HTXG6DF only) x 11979 60”, 6-Blade Superflat Pan x

Tools &Equipm

ent

RIDE-ON TROWELS

150

MQ Mechanical-Drive Ride-On Trowels

Path Fuel Tank Operating Engine Blades Rotor Width Capacity Run Dimensions Weight Model Engine* Cooling Per Rotor RPM in. (mm) gal. (L) Time in. (L x W x H) lb. (kg) HHNG5 35 HP Vanguard Commercial Air 5 0-180 92 (2330) 5 (18.93) 2.51 gal./hr. 95 x 48 x 59 1083(491) JWN24HTCSL 22.1 HP Honda GX690 Gasoline Air 4 36-170 75 (1905) 5 (18.93) 1.71 gal.hr. 77 x 39 x 46.75 741 (336)*Engine power ratings are calculated by the individual engine manufacturer and the rating method may vary among engine manufacturers. Multiquip Inc. and its subsidiary companies makes no claim, representation or warranty as to the power rating of the engine on this equipment and disclaims any responsibility or liability of any kind whatsoever with respect to the accuracy of the engine power rating. Users are advised to consult the engine manufacturer’s owners manual and its website for specific information regarding the engine power rating.

For a listing of all blades and pans,

see page 149 .

The JWN24HTCSL is a non-overlapping twin 36-inch (914mm) machine with a constantly variable transmission and a powerful GX690 Honda engine.

• Operator is able to completely view the finishing surface through the frame.• Retardant spray system is actuated by controls located on the steering handles for uniform coverage of the slab surface.• Weather resistant polyethylene fuel tank and battery box eliminates corrosion.• Halogen lights provide illumination for night time or indoor work.• Servicing is made easy by a frame design that allows quick access to fill ports and filters.• Rugged frame is made of chrome-moly steel to withstand the rigors of handling and transportation.• High-performance engines withstand the rigors of concrete finishing.• Mechanical TwinPitch control for fast, accurate adjustment of trowel blades.• Lifting points are built into the machine for balanced lifting.• Spider assemblies can be economically rebuilt and feature long-lasting wear plates and spider hubs.• Helical gearbox design is 33% more efficient than worm drive designs resulting in cooler operating temperatures and longer service life.

• Smooth responsive patented steering assist makes this unit easy to control on any slab.

• Twin 36-inch (914mm) non-overlapping rotors great for all stages of finishing from panning to sealing.

• Equipped with a GX690, 24HP, Honda V-Twin gasoline engine and construction grade drive line that enables rotor speed ranges from 36-170 rpm.

HHNG5

JWN24HTCSL

The HHNG5 is equipped with the coolest running gearbox in the industry. Power is supplied by a 35-HP Air Cooled Gasoline engine that spins twin five-blade rotors to a top speed of 180 RPM.


COMPACTION


Making a lasting impression.

• Cyclonic air cleaners that capture 98% of airborne dust particles.• Long-lasting laminated wood and steel shoe.• Low vibration handles for operator comfort.• Combination hour meter/tachometer.• Durable guards to protect the engine from damage.• Redesigned fuel tank to meet EPA standards for evaporative emissions.

MTX60HDHonda GX100 Engine, 3,060 lb. impact force, 10.4 in shoe For applications requiring even greater productivity, Multiquip’s Mikasa MTX60HD 4-cycle rammer is the answer. Now with a redesigned fuel-tank that meets new EPA standards and features an integrated tachometer/hour meter.

• Cyclonic air cleaners that capture 98% of airborne dust particles.• Long-lasting laminated wood and steel shoe.• Low vibration handles for operator comfort.• Combination hour meter/tachometer.• Durable guards to protect the engine from damage.• Redesigned fuel tank to meet EPA standards for evaporative emissions.

MTX70HDHonda GX100 Engine, 3,350 lb. impact force, 11.2 in shoe Multiquip’s Mikasa MTX70HD is our most popular selling rammer – new and improved! This middle-weight compactor is ideal for confined area compaction and is exceptionally well balanced. Now with a redesigned fuel-tank that meets new EPA standards and features an integrated tachometer/hour meter.

• Anti-vibration handle, reduces vibration to the operator by 50%.• Economical price tag.• Solid, high-strength steel base plate with curved edges for excellent performance and smooth turns on hot asphalt.• Highly maneuverable, ideal for tight, confined areas.

MVC82VHW3080 lb. cf, Honda GX160, 17.7 in. plate, water tank Recognized as the industry standard for compacting granular soils and asphalt.

SpecificationsCentrifugal Force 3080 lbf (13.7kN)Exciter Speed 5600 VPMPlate Size 17.7” x 22.4” (450 x 570mm)Max Forward Speed (Per Min.) 72 ft. (22m)Fuel Consumption (Per Hour) 0.31 gal. (1.17 L)Water Tank Capacity 11.5 qt. (10.88 L)Overall Length 36” (914mm)Overall Width 17.7” (450mm)Overall Height 39.5” (1003mm)Operating Weight 198 lb. (90kg)

Specifications MTX60HD MTX70HDEngine Make/Model Honda GX100 Honda GX100Start Method Recoil RecoilEngine Power 2.8 HP (2.1kW) 2.8 HP (2.1kW)Engine RPM 4,100 4,100Blows Per Min. Up to 695 Up to 690Impact Force 3,064 lbf (1390kgf) 3,350 lbf (1520kgf)Shoe Jump Height 3.1” (79mm) 3.1” (79mm)Shoe Dimensions 13.4” x 10.4” 13.4” x 11.2” (L x W) (340mm x 265mm) (340mm x 285mm)Travel Speed Per Min. 55.8ft. (17m) 55.8 ft. (17m)Fuel Tank Capacity 2.5 qt. (2 L) 2.5 qt. (2 L)Overall Length 28.1” (714mm) 31.0” (788mm)Overall Width 13.8” (350mm) 13.8” (350mm)Overall Height 40.4” (1027mm) 40.4” (1027mm)Operating Weight 141 lbs. (64kg) 165 lbs. (75kg)

Rammers – the most innovative, lowest maintenance and most productive in the business .

One-way Plate Compactor

Tools &Equipm

ent

CONCRETE EQUIPMENT

152

CT36 & CT48 – Gasoline Walk-behind Trowels

The models of the CT36 trowel range feature a trowel diameter of 36 inches - ideal for finishing medium sized areas. The models of the CT48 trowel range feature a trowel diameter of 48 inches – ideal for finishing medium large areas.

The trowels are optimally balanced, therefore they can be effortlessly controlled in the wide range of speeds. The transmission brake, electronic safety switch and engine speed sensor offer additional triple protection for the user. In an emergency situation the device will simply switch off and the handle will come to a stand-still after no more than a three-quarter turn. Furthermore, the unit will only start if the throttle lever is set to zero. This prevents an inadvertent rotation of the handle on start-up.

BTS635s – Gasoline cut-off saw with a blade diameter of 14”/350mm and Soft-Start

The gasoline cut-off saw is your ideal companion on site. It is extremely durable and robust thanks to high quality manufacturing standards of the individual components. The design is perfectly balanced, making for easy and intuitive operation of the saw. The air-cooled two-cycle engine has a high torque with reliable power transmission. This ensures the first-class cutting performance. And it remains easily within all specified emission limits.

• The 3-stage air filter system: saves time and money .• The Soft-Start: no effort recoil starter .

IRFU – High-frequency Internal Vibrators with Bodyguard® and integrated frequency converter

The high-frequency internal vibrators of the IRFU range share one main characteristic: They simply connect tothe 1-phase power supply and are ready to use. Quick, simple, flexible. Ideal for independent operation.• Integrated frequency converter.• Reliable operation, even if the input voltages fluctuate and when used with generators.• Non-wearing converter due to sealed electronics.• Rubber coated head model designed for use with epoxy rebar.• Available in different hose lengths and voltages.

• Vibrator heads with five diameter sizes . • Protection hose length up to 59’ (18m) .

CT36

CT48


CUT-OFF SAWS

Husqvarna K760#966433201 - 12”#966433401 - 14”

Husqvarna K970#966477101 - 14”#966477201 - 16”


ApplicationsuCuts concrete and masonry in alteration, renovation and new

construction work.uCuts smaller holes and adjusts window and door openings.uCuts curbstones and pavers in landscaping.uPipe cutting in installation work.uAsphalt cutting in roadwork and pre-cutting in pipe trenches.uMetal cutting.BenefitsuThe new Active Air Filtration™ is one of the most efficient air filtration systems on the market, delivering operational times (dry

cutting) of about one year with no filter service required.uOptimal ergonomics thanks to a high power-to-weight ratio, low

vibrations (below 2.5 m/s2) and steplessly adjustable magnesium blade guard.

uEngine with X-Torq® produces more power, higher torque and 75% fewer emissions.

uSmartCarb™, a built-in automatic filter compensation, maintains high power and lowers fuel consumption.uDuraStarter™, the dust-sealed starter, and the durable starter cord

reduce the risk of downtime and increase reliability and service life.EasyStart™.

uDEX, dust-handling system, provides cleaner cutting with less water usage.

uOne year warranty.

SpecificationsEngine ...........................................................Air-cooled 2-stroke engineDisplacement, cu. in. (cc) ............................................................4.5 (74)Power, hp (kW) .............................................................................5 (3.7)Blade diameter, in. (mm) ................................................12/14 (305/350)Depth of cut, in. (mm) ........................................................4/5 (100/127)Max blade RPM (no load) .............................................................. 5,400Fuel capacity, qt. (l) ....................................................................0.95 (.9)Max weight without fuel and cutting equipment, lbs. (kg) .....................................21.2/21.6 (9.6/9.8)

ApplicationsuCuts concrete and masonry in alteration, renovation and new con-

struction work.uCuts curbstones and pavers in landscaping.uPipe cutting in installation work.uAsphalt cutting in roadwork and pre-cutting in pipe trenches.uMetal cutting.BenefitsuActive Air Filtration™, centrifugal air cleaning, extends product life

and service intervals.uThe new, light magnesium blade guard (only available on 14” model)

makes cutting easier. Thanks to a stepless adjustment (only avail-able on 14” model), you can easily change the

cutting position.uEngine with X-Torq® produces more power, higher torque and 75%

fewer emissions.uSmartCarb™, a built-in automatic filter compensation, maintains high

power and lowers fuel consumption.uEasy to start, due to the decompression valve.uDuraStarter™, a dust-sealed starter, and the durable starter cord

reduce the risk of downtime and increase reliability.uThe Poly V-belt provides better power transmission, less retensioning

and increased product life.uOne year warranty.

SpecificationsEngine ...........................................................Air-cooled 2-stroke engineDisplacement, cu. in. (cc) ............................................................5.7 (94)Power, hp (kW) ..........................................................................6.5 (4.8)Blade diameter, in. (mm) ................................................14/16 (350/400)Depth of cut, in. (mm) ........................................................5/6 (127/152)Max blade RPM (no load) ................................ 14” (5,400) 16” (4,700)Fuel capacity, qt. (l) ....................................................................1.1 (1.0)Max weight without fuel and cutting equipment, lbs. (kg) ....................................24/24.7 (10.9/11.2)

Tools &Equipm

ent

SOFF-CUT SAWS

Husqvarna Soff-Cut® 5000#966845701

154

ApplicationsuUltra Early Entry™ concrete cutting system to reduce random cracking.uDesigned for highway, runway and paving applications.uSeveral blade widths can be used, allowing different joint widths and crack control simultaneously.BenefitsuSelf-propelled gasoline saw with positraction drive, hydrostatic trans-

mission and travel speed indicator.uElectronic remote key start and choke.uSwitch activated blade depth control, retractable guide and engine throttle.u15 Amp regulated charging system.uLow-noise and low-dust blade block enclosure.uDry cut diamond blade, anti-ravel skid plate and safety arbor.uMechanical depth gauge.uRemote mounted air filter.AccessoriesHeadlight/side light #505485003Ignition key, 2-pack #505487402Blade wrench #505483103

SpecificationsPower / Engine Manufacturer ..........................................25 hp* / KohlerBlade diameter, in. (mm) ...........................................12 (350) - 14 (350)Depth of cut, in. (mm) .....................................................2 (20) - 4 (100)Average bladeshaft, rpm ................................................................. 3,100Displacement, cu. in. (mm) .........................................................44 (725)Fuel capacity, gal. (l) ..................................................................3.16 (12)Weight, lbs. (kg) .......................................................................495 (225)


ApplicationsuUltra Early Entry™ concrete cutting system to reduce random cracking.uDesigned for peak performance on highways, runways and paving.

Ideal for heavy-duty commercial, industrial and paving applications.uMultiple blade widths can be used, allowing different joint widths and

crack control simultaneously.BenefitsuSelf-propelled gasoline saw with positraction drive, hydrostatic trans-

mission and travel speed indicator.uSwitch-activated electronic adjustable handles.uMaster switch control panel.uElectronic remote key start and choke.uHigh-strength, lightweight aluminum frame.u20 Amp regulated charging system.uSwitch-activated blade depth control and retractable guide.uDry-cut diamond blade, anti-ravel skid plate and safety arbor.uLow-noise and low-dust blade block enclosure.uMechanical depth gauge.AccessoriesHeadlight #505485002Ignition key, 2-pack #505487402Side light #505486902

SpecificationsPower / Engine Manufacturer ..........................................22 hp* / KohlerBlade diameter, in. (mm) .................................... 12 (350) - 13-1/2 (343)Depth of cut, in. (mm) ............................................. 1-1/8 (28.5) - 3 (76)Average bladeshaft, rpm ................................................................. 3,500Displacement, cu. in. (mm) ......................................................41.1 (674)Fuel capacity, gal. (l) ..................................................................3.16 (12)Weight, lbs. (kg) .......................................................................488 (221)

*As rated by engine manufacturer.


SOFF-CUT SAWS



ApplicationsuUltra Early Entry™ concrete cutting system to reduce random

cracking.uIdeal for medium to heavy-duty usage on highways, runways,

commercial, industrial and paving applications.uThree blade widths can be used, allowing different joint widths and

crack control simultaneously.BenefitsuSelf-propelled gasoline saw with positraction drive, hydrostatic

transmission and travel speed indicator.uSwitch-activated electronic adjustable handle.uMaster switch control panel.uElectronic remote key start and choke.uHigh-strength, lightweight aluminum frame.u10 Amp regulated charging system.uSwitch-activated blade depth control and retractable guide.uDry-cut diamond blade, anti-ravel skid plate and safety arbor.uLow-noise and low-dust blade block enclosure.AccessoriesHeadlight #505752201Ignition key, 2-pack #505487401Side light #505486901Blade wrench #505483103

SpecificationsPower / Engine Manufacturer ..........................................11 hp* / HondaBlade diameter, in. (mm) .............................................9 (228) - 10 (254)Depth of cut, in. (mm) ............................................. 5/8 (16) - 1-1/2 (38)Average bladeshaft, rpm ................................................................. 3,200Displacement, cu. in. (mm) ......................................................23.7 (389)Fuel capacity, gal. (l) ...................................................................1.6 (6.1)Weight, lbs. (kg) .......................................................................347 (157)


ApplicationsuUltra Early Entry™ concrete cutting system to reduce random

cracking.uDesigned for heavy-duty usage on highways, runways, commercial

and paving applications.uThree blade widths can be used, allowing different joint widths and

crack control simultaneously.BenefitsuSelf-propelled gasoline saw with hydrostatic transmission.uElectronic key start.uElectric blade depth control.u15 Amp regulated charging system.uMechanical remote retractable guide.uBuilt-in lifting system.uRoll cage frame.uDry-cut diamond blade, anti-ravel skid plate and safety arbor.uLow-noise and low-dust blade block enclosure.AccessoriesHeadlight kit #505484702

SpecificationsPower / Engine Manufacturer ..........................................20 hp* / KohlerBlade diameter, in. (mm) .................................... 12 (305) - 13-1/2 (343)Depth of cut, in. (mm) ....................................... 1-1/8 (28.5) - 2-3/4 (70)Average bladeshaft, rpm ................................................................. 3,500Displacement, cu. in. (mm) ......................................................39.1 (640)Fuel capacity, gal. (l) ...............................................................4.34 (16.4)Weight, lbs. (kg) .......................................................................420 (191)


Tools &Equipm

ent

SOFF-CUT SAWS


156

ApplicationsuUltra Early Entry™ concrete cutting system to reduce random cracking.uDesigned for heavy-duty usage on highways, runways and paving applications.uThree blade widths can be used, allowing different joint widths and

crack control simultaneously.BenefitsuSelf-propelled gasoline saw with hydrostatic transmission.uElectronic remote key start and choke.uLow-noise and low-dust blade block enclosure.uMechanical remote retractable guide.uRoll cage frame.uMechanical depth control.uCyclonic air filter to increase engine longevity.uDry-cut diamond blade, anti-ravel skid plate and safety arbor.AccessoriesHeadlight kit #505484701

SpecificationsPower / Engine Manufacturer .............................................9 hp* / RobinBlade diameter, in. (mm) .............................................9 (228) - 10 (254)Depth of cut, in. (mm) ............................................. 5/8 (16) - 1-1/2 (38)Average bladeshaft, rpm ................................................................. 3,200Displacement, cu. in. (mm) ......................................................16.2 (265)Fuel capacity, gal. (l) .................................................................1.59 (6.0)Weight, lbs. (kg) .......................................................................317 (144)


ApplicationsuUltra Early Entry™ concrete cutting system to reduce random cracking.uDesigned for residential and light commercial applications such as driveways and parking lots.BenefitsuGasoline saw with easy pull start engine.uLow-noise and low-dust blade block enclosure.uMechanical blade depth control.uNon-marking and non-stick polyurethane wheels.uRetractable front guide system.uFolding handle.uSafety arbor.uHigh strength single piece frame.AccessoriesProEdge height adjustment mechanism for the 150saw required to use beveled blades P152128 #505398101

SpecificationsPower / Engine Manufacturer ..........................................4.3 hp* / RobinBlade diameter, in. (mm) ...............................................4 (101) - 6 (152)Depth of cut, in. (mm) ........................................... 1/2 (12) - 1-3/16 (30)Average bladeshaft, rpm ................................................................. 3,800Displacement, cu. in. (mm) ......................................................7.69 (126)Fuel capacity, gal. (l) ...................................................................0.7 (2.7)Weight, lbs. (kg) ...........................................................................87 (39)



SOFF-CUT SAW BLADES

ULTRA EARLY ENTRY™ SOFF-CUT® SAW BLADESHusqvarna Excel 1000 Series PurpleuFor ultra hard aggregate, non-abrasive sand.


Husqvarna Excel 2000 Series GreenuFor hard aggregate, non-abrasive sand.Size - Inches (mm) Blade Item #6 (152) x .100 XL6-2000 542777006 8 (203) x .100 XL8-2000 542756131 10 (254) x .100 XL10-2000 542756101 12 (305) x .120 XL12-2000 542756106 13-1/2 (343) x .120 XL14-2000 542756113 Paver blades - for 5000 saw only12 (305) x .120 PV12-2000 542756170 12 (305) x .250 PV12S14-2000 542756207 12 (305) x .380 PV12S38-2000 510384601 12 (305) x .500 PV12S50-2000 542756211 14 (350) x .120 PV14-2000 542756173 14 (350) x .250 PV14S14-2000 542756176

Size - Inches (mm) Blade Item #6 (152) x .100 XL6-1000 5427770058 (203) x .100 XL8-1000 54275613710 (254) x .100 XL10-1000 54275610010 (254) x .250 XL10S14-1000 542756292 12 (305) x .120 XL12-1000 542756105 12 (305) x .220 XL12S22-1000 542756164 12 (305) x .250 XL12S14-1000 542756291 12 (305) x .380 XL12S38-1000 542756273 13-1/2 (343) x .120 XL14-1000 542756112 13-1/2 (343) x .250 XL14S14-1000 542756261

Husqvarna Excel 4000 Series OrangeuFor medium aggregate, medium abrasive sand.Size - Inches (mm) Blade Item #6 (152) x .100 XL6-4000 542777008 8 (203) x .100 XL8-4000 542756133 10 (254) x .100 XL10-4000 542756103 12 (305) x .120 XL12-4000 542756108 12 (305) x .220 XL12S22-4000 542756111 Paver blades - for 5000 saw only12 (305) x .120 PV12-4000 542756171 12 (305) x .250 PV12S14-4000 542756208 14 (350) x .120 PV14-4000 542756174 14 (350) x .250 PV14S14-4000 542756177

Size - Inches (mm) Blade Item #6 (152) x .100 XL6-6000 542756150 8 (203) x .100 XL8-6000 542756179 10 (254) x .100 XL10-6000 542756136 12 (305) x .120 XL12-6000 542756110 13-1/2 (343) x .120 XL14-6000 V 542756167 Paver blades - for 5000 saw only12 (305) x .120 PV12-6000 542756172 14 (350) x .120 PV14-6000 542756175

Husqvarna Excel 5000 Series YellowuFor medium to soft aggregate, abrasive sand.

Husqvarna Excel 6000 Series BlackuFor soft aggregate, abrasive sand.

Size - Inches (mm) Blade Item #6 (152) x .100 XL6-1XX1TB 5427561838 (203) x .100 XL8-1XX1TB 510402902 10 (254) x .100 XL10-1XX1TB 542756187 12 (305) x .120 XL12-1XX1TB 542756192 13-1/2 (343) x .120 XL14-1XX1TB 510401401

Husqvarna Excel Turbo SeriesuFor soft aggregate, soft manufactured sand (limestone).

Size - Inches (mm) Blade Item #4 (102 x .100 XL4-Score 516029402

Husqvarna Score Cutting Blade for 150 SawuScore cuts 1/2” deep (maximum) in cured concrete.

Size - Inches (mm) Blade Item #5 (127) x .095 XL5-5000A 542756138 5 (127) x .095 XL5-5000A-X50 542756140 5-1/2 (140) x .095 XL55-5000A 542756123 6 (152) x .100 XL6-5000 542777009 8 (203) x .100 XL8-5000 542756134 9 (230) x .100 XL9-5000 542756160 10 (254) x .100 XL10-5000 542756104 10 (254) x .250 XL10S14-5000 542756163 10 (254) x .380 XL10S38-5000 542756190 12 (305) x .120 XL12-5000 542756109 12 (305) x .250 XL12S14-5000 542756166 12 (305) x .380 XL12S38-5000 542756198 12 (305) x .500 XL12S50-5000 542756200 13-1/2 (350) x .120 XL14-5000 542756116 13-1/2 (343) x .250 XL14S14-5000 542756169 13-1/2 (343) x .380 XL14S38-5000 542756206

Husqvarna Excel 3000 Series ReduFor medium to hard aggregate, medium abrasive sand.Size - Inches (mm) Blade Item #5 (127) x .095 XL5-3000A 542756118 5 (127) x .095 XL5-3000A-X50 542756120 5.16 (131) x .225 XL5S-3000-X50 542756182 5.16 (131) x .225 XL5S310-3000A 542756180 5-1/2 (140) x .095 XL55-3000A 542756121 6 (152) x .100 XL6-3000 542777007 6 (152) x .225 XL6S225-3000 542777011 8 (203) x .100 XL8-3000 542756132 8 (203) x .225 XL8S225-3000 542756158 9 (230) x .100 XL9-3000 542756159 10 (254) x .100 XL10-3000 542756102 10 (254) x .250 XL10S14-3000 542756161 10 (254) x .380 XL10S38-3000 542756189 12 (305) x .120 XL12-3000 542756107 12 (305) x .250 XL12S14-3000 542756165 12 (305) x .380 XL12S38-3000 542756197 12 (305) x .500 XL12S50-3000 542756199 13-1/2 (350) x .120 XL14-3000 542756114 13-1/2 (343) x .250 XL14S14-3000 542756168 13-1/2 (350) x .380 XL14S38-3000 510401601

V = undercut protection Tools &Equipm

ent

CONCRETE VIBRATOR

W994G1 Electric Concrete Vibrator

158

Legendary Wyco performance in a package that meets NEW UL standards

• Drives any head and shaft combination – one motor for all your consolidation needs.

• Conforms to current UL and OSHA regulations for safety.

• Lightweight with ergonomic hand grip and shoulder strap.

• Quick Connect technology used for shaft connection.

• Powers through your most challenging concrete applications.

The 994 electric motor vibrator builds on the legacy of the rugged and reliable 992A and 993. The 994 was designed to incorporate the latest features from our Sure Speed line, including a rugged molded motor enclosure, durable electric switch and easy-to-service motor brushes.

With all the features you expect on the jobsite, the 994 is ready to tackle your toughest consolidation jobs. The 994 meets the highest safety standards in the industry – UL60745-2-12 Electrical Certification, cUL, CE Listed to ensure jobsite safety as well as OSHA 29 CFR 1910.95 compliance for noise levels.

Shaft (Core & Casing) Motor Available in 2’, 5’, 7’, 10’, 14’ & 20’ sections Head

W877-520 13/16”

W988-Series W877-526 1”

W878-533* 1-3/8”

W878-540 1-3/4”

W989-Series W878-563* 2”

W878-568 2-1/4”

W877-512* 2-1/2”

*Available in polyurethane coated.

W994G115 Amp

3-Wire Grounded115V

Shaft and Head Selection


SUBMERSIBLE /TRASH PUMPS


• 1.0 HP, 115V/9.8A, 1Ø, UL & CUL Listed electric motor.• Built-in overload protection.• 2” (NPT) female discharge port.• Reliable double mechanical oil-filled seals.• Cast iron/steel motor casing serves as heat conductor.• Pumps liquid up To 120° F.• 25’ of molded power cord w/strain relief.• Dewaters flat surfaces up to 1/2” levels.

ST20372-Inch Discharge, 115V 1Ø, 1.0 HP, 73 GPM, 37’ Total Head This lightweight, compact submersible centrifugal pump is ideal for moving water in multiple confined and open area applications.

• 1.0 HP, 115V/8.0A, 1Ø, UL & CUL Listed electric motor.• Built-in overload protection.• 2” (NPT) female discharge port.• Reliable double mechanical oil-filled seals.• Cast iron/steel motor casing serves as heat conductor.• Pumps liquid up To 120° F.• 50’ of molded power cord w/strain relief.• Dewaters flat surfaces up to 1/16” Levels.

ST2038P2-Inch Discharge, 115V 1Ø, 1.0 HP, 60 GPM, 38’ Total HeadThe unique casing design of this pump permits it to draw water to a level of 1/16” without having to place the pump in any kind of sump.

• 1.0 HP, 115V/6.5A, 1Ø, UL & CUL Listed electric motor.• Built-in overload protection.• 2” (NPT) female discharge.• Total head: 40 ft.• MAX capacity: 79 gmp.• Pumps liquid up to 120° F.• Heavy-duty cast iron housing construction.• Dewaters flat surfaces up To 2” Levels.

ST2040T2-Inch Discharge, 115V 1Ø, 1.0 HP, 79 GPM, 40’ Total HeadThis lightweight, compact submersible trash pump is ideal for moving water with debris (Maximum size - 1” solids). The Industrial grade cast iron housing and abrasion resistant Cast Iron Impeller with Neoprene Rubber overlay tackles tough dewatering applications and heavy usage operations.

• Lightest trash pump in the Multiquip fleet.• Dual 2-inch discharge ports.• MAX solid discharge size: 1-inch diameter.• Pumps up to 211 gallons (800 liters) per minute. • Improved mechanical (silicone/silicone) seal.• Reliable 4.8 HP Honda GX160 engine.• Low engine oil shutdown.• Aluminum body with cast-iron fittings.• Easy clean-out cover.• Tubular steel frame for transportation and pump protection.• Cast Iron impeller and volute for abrasion resistance/long life.

QP2TH2” Suction, Trash Pump, 211 GPM, 98’ MAX Head; Honda GX160 This Honda-powered trash pump boasts a host of standard features for superior performance across the board. One-man operation to use in various dewatering applications when you have debris in the water.

• Features to tackle the demanding requirements of the pro contractors.• Trusted 7.9 HP Honda GX240 gasoline engine.• Automatic low oil shutdown for the engine is a standard feature.• Pumps water with solid content as large as 1.5-inch (37 mm) in diameter.• Maximum lift of 25 feet (7.6 meters).• Can pump up to 396 gallons (1,500 liters) per minute.• Dual 3-inch discharge ports to adapt to different applications.• Silicon/silicon mechanical seal for durability.• Large cleanout cover removes in seconds without tools.• Tubular steel frame for transportation and pump protection.• Cast iron impeller and volute for abrasion resistance/long life.• Aluminum body with cast-iron fittings.

QP3TH3” Suction, Trash Pump, 396 GPM, 95’ MAX Head; Honda GX240 This is Multiquip’s most popular pump model. The QP3TH is perfect for many pumping applications from dewatering to water tank and water truck use. Dual discharge ports increase the productivity and practicality of this gasoline-powered trash pump.

Clean-Water Submersible Pumps

Electric Submersible Trash Pumps

Gasoline-Powered Trash Pumps

Tools &Equipm

ent

REBAR CUTTERS & BENDERS

Portable Rebar Cutters (Grade 60 Rebar)

160

Model # DC-16W DCC-1618HL DC-20WH DC-25X DC-32WHMax Cutting Diameter 5/8” #5 Rebar 5/8” #5 Rebar 3/4” #6 Rebar 1” #8 Rebar 1-1/4” #10 RebarCutting Speed / Pressure 2.5 Sec. / 15 Tons 3 Sec. / 15 Tons 5 Sec. / 30 Tons 7 Sec. / 45 TonsCuts per battery / Speed 75 Cuts / 5 Sec.Voltage / 115V 50/60Hz / 115V 50/60Hz / 115V 50/60Hz / 115V 50/60Hz /Amperage 10 Amps 10 Amps 12 Amps 18 AmpsLi-ion Battery 18 V DC, 3.0AhBattery Charger 110 V 60 HzTool Weight 17.6 lbs. 16.1 lbs. 25.4 lbs. 49.6 lbs. 79 lbs.Dimensions LxWxH 18”x10.5”x4.5” 17.9”x3.8”x9.4” 16”x4.3”x8.2” 20”x5.9”x9.8” 23.1”x7”x10.6”

Portable Rebar Benders (Grade 60 Rebar)

Model # HB-16W DBD-16X DBD-25X DBR-25WH DBD-32XMax Bending Diameter 5/8” #5 Rebar 5/8” #5 Rebar 7/8” #7 Rebar 1” #8 Rebar 1-1/8” #9 RebarBending Angle / Speed 1-135° / 8 Sec. ≤180° / 5 Sec. ≤180° / 6 Sec. ≤94° (1/2”) ≤180° / 8 Sec. ≤90° (1”)Voltage / 115V 50/60Hz / 115V 50/60Hz / 115V 50/60Hz / 115V 50/60Hz / 115V 50/60Hz /Amperage 10 Amps 10 Amps 12 Amps 12 Amps 12 AmpsTool Weight 33 lbs. 90 lbs. 190 lbs. 57.3 lbs. 397 lbs.Dimensions LxWxH 22.8”x7.6”x8” 16.6”x12.5”x16.2” 19”x21.5”x17.2” 25.75”x10.5”x7.8” 23”x24.2”x18.7”

Portable Rebar Bender/Cutters (Grade 60 Rebar)

Model # DBC-16H DBC-20X DBC-25H DBC-2525 MBC-16BRebar Capacity Up to #5 3/4” Up to #6 1” Up to #8 Max Cutting Capacity 1” #8 5/8” #5Max Bending Capacity 7/8” #7 5/8” #5Bending Roller 2.42” Dia.Clearance (in-place) Cutting 1.75” from SurfaceClearance (in-place) Bending 4.5” from SurfaceCutting Speed 3 Sec. 3 Sec. 3 Sec.Bending Speed 180° in 7 Sec. 180° in 7 Sec. 180° in 9 Sec.Bending Capability 0-180°Voltage / 115V 50/60Hz / 115V 50/60Hz / 115V 50/60Hz / 115V 50/60Hz / 115V 50/60Hz /Amperage 10 Amps 10 Amps 12 Amps 10 Amps Cutting 12 Amps 12 Amps BendingWeight 40 lbs. 212 lbs. 321 lbs. 250 lbs. 57 lbs. (w/board)Dimensions LxWxH 25-1/8”x6-3/8”x8-5/8” 28”x18”x21.5” 32.75”x28”x22.5” 19.25”x24.75”x37.25” 60.5”x7.5”x10”


DEMOLITION HAMMERS & IMPACT DRIVERS


Bosch 11255VSR1” SDS-plus® Bulldog™ Extreme Rotary Hammer• 7.5 Amp; 0-1, 300 RPM; 0-5,800 BPM.• 3 Modes of operation – rotation only, rotary hammer and hammer-only.• Vario-Lock™ positioning.• HammerHook™.• Rotating brush plate.• Cord turret – 35° pivot.• SDS-plus® bit system.• D-handle design.• Variable-speed reversing trigger.• Integral clutch.

Bosch DH712VC18 Lb. SDS-max® Demolition Hammer• Best power to weight ratio – 14.5 Amp, 9.6 ft. lbs. of impact

energy (E.P.T.A.) and 18.3 lbs.• Active Vibration Control™.• Service Minder™ light.• Power light, Cord turret.• Constant Response™ circuitry.• Articulating auxiliary handle.• Vario-Lock positioning.• Variable speed dial.

Bosch DH507SDS-max® Demolition Hammer• Comfortable ergonomic grip area.• Variable speed trigger, variable speed dial.• SDS-max® bit system for tool-free bit changes and automatic bit locking.• Vario-Lock positioning.• 360° Auxiliary side handle.

Bosch DH1020VCSDS-max® Demolition Hammer• Best in class impact energy – 17 ft. lbs.• Best in class Anti-Vibration system.• In-line design – better weight distribution.• In-line design – longer hammer design.• Constant Response™ circuitry.• Vario-Lock™ positioning.• Variable speed dial.• Service Minder™ light.

Bosch BH2760VCBBrut™ Breaker Hammer with Basic Cart• Hits 50% harder than the former 11304.• Active Vibration Control™.• Ergonomic handles.• Non-slip housing cover.• Total portability – operates on 115/120 V AC/DC, 15 Amp outlet or 2500

watt portable generator.• Service Minder™ brush system.• Grease packed gear box and hammer mechanism.• The plus in anywhere hammer – does not need a compressor.

Bosch 25618BN18V Lithium-Ion, 1/4” Hex Impact Driver• 25% Lighter than the competition.• 25% Shorter than the competition.• Faster drill speeds and higher torque.• Customized inserts that hold individual tools in place with room underneath to keep other items, such as bits, batteries, chargers and more.

Bosch IDH182-0218V EC Brushless Socket Ready Impact with 1/4” Hex and 1/2” Square Drive• Socket-ready chuck – all-in-one impact driver and impact

wrench with a 1/4” quick-change hex and 1/2” square drive chuck for sockets.• Brushless motor.• 3 Speed and torque settings.• High torque output in its class of 1650 in. lbs.• Smallest grip diameter for best in class ergonomics.• 3 LED light design – shadow free illumination.• Electronic motor and cell protection help prevent overheating and overloading.• Advanced heat conductive housing keeps battery cooler.

Tools &Equipm

ent

ANGLE GRINDERS & WORM DRIVE SAWS

162

Bosch 1380SLIM-K4-1/2”, 7.5 Amp, Slip Grip Angle Grinder• Ergonomic small grip.• RPM - 11,000.• Directed air flow.• Removable brush covers.• Lock-on side switch.

Bosch 18SG-77” Angle Grinder Concrete Surfacing Attachment• Dust collection.• Removable nose piece.• Replaceable brush ring.• Completely tool free.• Bosch AIRSWEEP™ vacuum compatible.

Bosch AG40-85PD4-1/2” Angle Grinder with No-Lock-On Paddle Switch• Patented multi-grip paddle switch.• No-lock-on switch.• 8.5 Amp, 11,500 RPM motor.• Two-position vibration control handle.• Direct air flow.• Ergonomic housing.• Service Minder™ brushes.• Gear housing rotates 90 degrees.• Epoxy coated field windings.• Toolless adjustable guard.

Bosch AG50-125PD5” High Performance Angle Grinder with No-Lock-On Paddle Switch• Patented multi-grip paddle switch.• 12.5 Amp, 11,500 RPM motor.• Electronic clutch.• Overload protection.• Constant Response™ circuitry.• Soft start.• Restart protection.• No-lock-on switch.• Two-position vibration control handle.• Direct air flow.• Service Minder™ brushes.• Gear housing rotates 90 degrees.• Ergonomic housing.• Epoxy coated field windings.• Toolless adjustable guard.

SKILSAW SPT77WM-227-1/4” Magnesium Worm Drive Saw• Lightweight magnesium construction (12.45 lbs. without

blade, cord and wrench).• Duel-Field™ motor.• Die-cast magnesium foot has large easy-to-read bevel

and depth-of-cut scales.• 53° Bevel.• 24-Tooth Diablo® carbide blade.

SKILSAW SPT77WML-227-1/4” Lightweight Worm Drive Saw• Lighter magnesium construction.• Cut-Ready™ depth of cut system.• 53° Bevel.• Multi-function wrench.• 15 Amps of power.• Impact-resistant carbide blade.• Saw hook.• Anti-snag lower guard.• Durable magnesium foot.• Oil lubricated worm drive gears.• More accessible spindle lock.• Soft-grip handle.• Weight - 11.5 lbs. without blade, cord and wrench.

Bosch 18DC-5E4-1/2” to 5” Small Angle Grinder Dust Collection Attachment• Dust collection.• Large, durable foot plate.• Single screw depth adjustments.• Completely tool free.• Bosch AIRSWEEP™ vacuum compatible.


WET/DRY VACUUM

16 Gal Wet+Dry DustlessVac®

DustBuddie XP


16 Gal HEPA Wet+Dry DustlessVac®

The patented Wet+Dry DustlessVac® is the only vacuum that allows you to go from wet to dry without switching filters. A baffle inside the barrel keeps the water away from the filters, and a check ball prevents overfilling, making the Wet+Dry DustlessVac unlike any other vacuum on the market today. The patented filtration system of the Wet+Dry DustlessVac allows you to clean the filters without opening the barrel for a more dust-free work environment. An excellent choice for contractors and DIY homeowners who do not need to meet EPA or OSHA guidelines but want effective and economical dust control, this vacuum provides “almost HEPA” performance. The disposable and tear-resistant WunderBag™ micro pre-filter captures particles down to .5 microns, amazingly close to HEPA filters that capture down to .3 microns. Best for capturing fine dust from drywall sanding, grinding/cutting of concrete, brick, stone or fiberglass, the Wet+Dry DustlessVac provides powerful suction and intense durabili-ty to stand up to whatever the jobsite throws at you.

The patented HEPA Wet+Dry DustlessVac® gives you the same power, suction and advantages of the Wet+Dry DustlessVac plus certified HEPA filtration.The HEPA Wet+Dry DustlessVac is ideal for contractors required to comply with EPA regulations covering lead paint removal. The HEPA filter captures 99.97% of dust particles down to .3 microns, removing visible and invisible dust. The life of the HEPA filter and vacuum is extended when used with the optional Wunderbag™ micro pre-filter, as it captures the vast majority of dirt and dust before it reaches the more expensive HEPA filter. Using the Wunderbag™ micro pre-filter achieves the first step in the double-bagging process required by the EPA for RRP work.Designed to switch from dry to wet operation without getting the valuable HEPA filter wet, the HEPA Wet+Dry DustlessVac is the most economically affordable HEPA vacuum available today.

ITEM #D1603INCLUDES: (1) 16-gallon DustlessVac, (2) extension wands, (1) outer filter,(1) inner filter, (1) WunderBag™ micro pre-filter, (1) crevice tool,(1) floor tool, (1) 1.5” x 12’ crush-resistant hose.BEST FOR: Extra fine dust (drywall, concrete, stone, fiberglass, slurry).

ITEM #D1606INCLUDES: (1) 16-gallon HEPA DustlessVac, (2) extension wands, (1) certified HEPA filter, (1) HEPA filter cover, (1) WunderBag™ micro pre-filter, (1) crevice tool, (1) floor tool, (1) 1.5” x 12’ crush-resistant hoseBEST FOR: Extra fine dust (drywall, concrete, stone, fiberglass, slurry).

Features• Captures up to 99% of airborne dust.• Easy to install.• Made of glass-filled nylon – better abrasion resistance.• Grinds against walls.• Brush skirt improves dust collection.• Integrated universal adapter.• Fits most hand grinders.

Dustie

Improved Wheels

Improved Wheels

Features• Easy to install.• Captures up to 99% of airborne dust.• Fits most hand grinders.• Adjustable and adaptable.• Attaches quick and easy with Flex-Flange™.• Flex-Flange connecting collar fits most hand grinders.• Meets EPA regulations for lead paint renovation work.• Protects from harmful Silicosis and Hexavalent Chromium.• Fits DeWALT, Makita, Bosch and more.• Meets OSHA and NIOSH guidelines.

Item #D1836 5” Dustie Fits 4” to 5” GrindersItem #D1854 7” Dustie Fits 6” to 9” GrindersItem #D5160 Optional 6’ Hose

Item #D5835 5” DustBuddie XP Fits 4” to 5” Grinders Fits 1½” - 2¼” collarsItem #D5850 7” DustBuddie XP Fits 6” to 9” Grinders

Tools &Equipm

ent

SDS-max® HAMMER BITS& HAMMER STEEL

164

SDS-max® SpeedX™ Rotary Hammer Bits Useable OverallItem # Diameter Length LengthHC5005† 3/8” 8” 13”HC5010† 1/2” 8” 13”HC5011† 1/2” 16” 21”HC5013† 1/2” 24” 29”HC5015† 9/16” 8” 13”HC5016† 9/16” 16” 21”HC5017† 9/16” 24” 29”HC5020 5/8” 8” 13”HC5021 5/8” 16” 21”HC5024 5/8” 24” 29”HC5023 5/8” 31” 36”HC5026 11/16” 16” 21”HC5030 3/4” 8” 13”HC5031 3/4” 16” 21”HC5033 3/4” 31” 36”HC5034 3/4” 24” 29”HC5036 13/16” 16” 21”HC5040 7/8” 8” 13”HC5041 7/8” 16” 21”HC5044 7/8” 24” 29”HC5043 7/8” 31” 36”

Useable OverallItem # Diameter Length LengthHC5050 1” 8” 13”HC5051 1” 16” 21”HC5053 1” 31” 36”HC5054 1” 24” 29”HC5060 1-1/8” 8” 13”HC5061 1-1/8” 16” 21”HC5062 1-1/8” 24” 29”HC5063 1-1/8” 31” 36”HC5070 1-1/4” 8” 13”HC5071 1-1/4” 16” 21”HC5072 1-1/4” 24” 29”HC5073 1-1/4” 31” 36”HC5081 1-3/8” 16” 21”HC5082 1-3/8” 24” 29”HC5083 1-3/8” 31” 36”HC5091 1-1/2” 16” 21”HC5092 1-1/2” 24” 29”HC5093 1-1/2” 31” 36”HC5098 1-3/4” 16” 21”HC5099 2” 16” 21”

†Two cutter

Item # Description SizeHS1935 R-Tec flat chisel self-sharpening 1” × 16”HS1936 R-Tec star point chisel twist self-sharpening, no jam 16”HS1906 Aspalt cutter 5” × 15” HS1909 Bushing tool, one piece 16 tooth head, 1-3/4” square × 9-1/4”HS1910 Scaling chisel 3” × 12”HS1916 Scaling chisel 1-1/2” × 12”HS1917 Scaling chisel self-sharpening 2” × 14”HS1911 Flat chisel 1” × 12” HS1912 Flat chisel 1” × 18”HS1913 Bull point 12”HS1914 Bull point 18”HS1915 Tile chisel 2” × 12”HS1918 Floor scraper 6” × 25”HS1920 Seam tool 1-1/8” × 15”HS1921 Slotting tool 1-1/8” × 15”HS1922 Clay spade 4-1/2” × 17”HS1924 Ground rod driver 5/8” and 3/4” rodsHS1926 Round spade 5-3/8” × 16”HS1927 Tamper plate shank 12”HS1828 Tamper plate 5” × 5”HS1928 Winged channel chisel 1” × 15”HS1929 Gouge 1” × 12”HS1969 Carbide bushing tool 25 tooth head (carbide), 2” × 2” sq.

Speed X™

SDS-max® Hammer Steel Item # Description SizeHS2124 Tamper plate 6” × 6”HS2125 Tamper plate 8” × 8”HS2126 Tent stake driver 5-1/2”HS2861 Star point self-sharpening 16”HS2161 Moil point 20”HS2863 Flat chisel 16”HS2163 Narrow chisel 20”HS2164 3” chisel 20”HS2166 Superkut chisel 20-1/2”HS2167 5” asphalt cutter 19”HS2168 3” digging chisel 22-1/2”HS2169 5-3/8” clay spade 21”HS2170 Frost wedge 24-1/2”HS2171 Spike/pin driver 14-1/2”HS2172 Ground rod driver 15-1/2”HS2173 Tamper shank 15-1/2”

1-1/8” Hex Hammer Steel

Item # Description HS1415 10” pointHS1420 3/4” × 10” chiselHS1430 1/4” × 7” wood chiselHS1435 1/2” × 7” wood chiselHS1440 3/4” × 7” wood chiselHS1445 1” × 7” wood chiselHS1450 1-1/4” × 7” wood chiselHS1475 10” gouging chiselHS1480 8” carbide tipped pointHS1485 1-1/2” × 5-3/4” stubby scaling chiselHS1490 5-3/4” stubby pointHS1495 3/4” × 5-3/4” stubby flat chisel

SDS-plus® Bulldog™ Hammer Steel

Item # Description HS1425 1-1/2” × 10” wide chisel (self-sharpening)HS1427 2-1/2” × 10” wide chisel (self-sharpening)HS1465 1-1/2” × 10” tile chiselHS1470 3/4” × 10” viper flat chisel (long life)HS1472 10” point (long life)

SDS-plus® Bulldog™ Xtreme Hammer Steel


SDS-plus® HAMMER BITS


Daredevil™ Spade Bits

SDS-plus® Bulldog™ Rotary Hammer Bits

OverallItem # Diameter LengthDSBS1003 3/8” 4” DSBS1005 1/2” 4” DSBS1007 5/8” 4” DSBS1009 3/4” 4” DSBS1011 7/8” 4” DSBS1013 1” 4” DSBS1015 1-1/8” 4” DSBS1017 1-1/4” 4” DSBS1021 1-1/2” 4” DSB1001 1/4” 6” DSB1002 5/16” 6” DSB1003 3/8” 6” DSB1004 7/16” 6” DSB1005 1/2” 6” DSB1006 9/16” 6” DSB1007 5/8” 6”

Useable OverallItem # Diameter Length LengthHC2000 5/32” 2” 4” HC2001 5/32” 4” 6” HC2009 5/32” 6” 8”HC2010 3/16” 2” 4” HC2011 3/16” 4” 6” HC2012 3/16” 6” 8”HC2014 3/16” 10” 12” HC2016 3/16” 16” 18”HC2031 7/32” 4” 6”HC2032 7/32” 6” 8” HC2040 1/4” 2” 4”HC2041 1/4” 4” 6”HC2042 1/4” 6” 8”HC2044 1/4” 10” 12”HC2046 1/4” 16” 18”HC2051 5/16” 4” 6”HC2052 5/16” 6” 8”HC2054 5/16” 10” 12”HC2055 5/16” 16” 18”HC2061 3/8” 4” 6”HC2062 3/8” 6” 8”HC2064 3/8” 10” 12”HC2067 3/8” 16” 18”HC2068 3/8” 22” 24”HC2069 3/8” 37” 39”HC2073 7/16” 6” 8”HC2074 7/16” 10” 12”HC2081 1/2” 4” 6”HC2083 1/2” 6” 8”HC2084 1/2” 10” 12”HC2087 1/2” 16” 18”HC2088 1/2” 22” 24”HC2089 1/2” 37” 39”HC2093 9/16” 6” 8”HC2094 9/16” 10” 12”HC2097 9/16” 16” 18”HC2102 5/8” 6” 8”HC2104 5/8” 10” 12”HC2107 5/8” 16” 18”HC2108 5/8” 22” 24”HC2122 3/4” 6” 8”HC2124 3/4” 10” 12”HC2127 3/4” 16” 18”HC2128 3/4” 22” 24”HC2147 7/8” 16” 18”HC2163 1” 8” 10”HC2167 1” 16” 18”

Useable OverallItem # Diameter Length LengthHCFC2010 3/16” 2” 4”HCFC2011 3/16” 4” 6-1/2”HCFC2012 3/16” 6” 8-1/2”HCFC2014 3/16” 10” 12”HCFC2040 1/4” 2” 4” HCFC2041 1/4” 4” 6-1/2”HCFC2042 1/4” 6” 8-1/2”HCFC2044 1/4” 10” 12”HCFC2051 5/16” 4” 6”HCFC2054 5/16” 10” 12”HCFC2061 3/8” 4” 6”HCFC2064 3/8” 10” 12”HCFC2067 3/8” 16” 18”HCFC2081 1/2” 4” 6”HCFC2084 1/2” 10” 12”HCFC2087 1/2” 16” 18”HCFC2102 5/8” 6” 8-1/2”HCFC2103 5/8” 10” 12”HCFC2104 5/8” 16” 18”HCFC2224* 3/4” 8” 10”HCFC2227* 3/4” 16” 18”HCFC2244* 7/8” 8” 10”HCFC2247* 7/8” 16” 18”HCFC2263* 1” 8” 10”HCFC2267* 1” 16” 18”HCFC2283* 1-1/8” 8” 10”HCFC2287* 1-1/8” 16” 18”*Four cutter

OverallItem # Diameter LengthDSB1008 11/16” 6” DSB1009 3/4” 6” DSB1010 13/16” 6” DSB1011 7/8” 6” DSB1012 15/16” 6” DSB1013 1” 6” DSB1015 1-1/8” 6” DSB1017 1-1/4” 6” DSB1019 1-3/8” 6” DSB1021 1-1/2” 6” DLSB1003 3/8” 16” DLSB1005 1/2” 16” DLSB1007 5/8” 16” DLSB1009 3/4” 16” DLSB1011 7/8” 16” DLSB1013 1” 16”

SDS-plus® Rebar Cutters

Item # Diameter LengthRC2064 3/8” 12”RC2084 1/2” 12”RC2094 9/16” 12”RC2104 5/8” 12”RC2124 3/4” 12”

Item # Diameter LengthRC2144 7/8” 12”RC2164 1” 12”RC2168 1-1/8” 12”RC2172 1-1/4” 12”RC2176 1-1/2” 12”

SDS-plus® Bulldog™ Xtreme Rotary Hammer Bits

4XLonger life in rebar vs. standard SDS-plus® bit

Tools &Equipm

ent

DUST EXTRACTIONDRILL BIT

166

SPEED CLEAN™

Shank Diameter Catalog # Description SDS-Plus 7/16” DXS2074 DXS SDS+ 7/16x7-1/2x13 SDS-Plus 1/2” DXS2084 DXS SDS+ 1/2x7-1/2x13 SDS-Plus 9/16” DXS2094 DXS SDS+ 9/16x10x15 SDS-Plus 5/8” DXS2104 DXS SDS+ 5/8x10x15 SDS-Plus 11/16” DXS2114 DXS SDS+ 11/16x12-/2x18 SDS-Plus 3/4” DXS2124 DXS SDS+ 3/4x12-1/2x18 Vacuum Adapter (Plus) n/a DXSPLUS DXS SDS+ Adapter SDS-Max 3/4” DXS5034 DXS SDS Max 3/4x12-2x21 SDS-Max 13/16” DXS5048 DXS SDS Max 3/16x15x25 SDS-Max 7/8” DXS5044 DXS SDS Max 7/8x15x25 SDS-Max 1” DXS5054 DXS SDS Max 1x17-1/2x27 SDS-Max 1-1/8” DXS5062 DXS SDS Max 1-1/8x20x29 SDS-Max 1-3/8” DXS5082 DXS SDS Max 1-3/8x25x34 Vacuum Adapter (Max) n/a DXSMAX DXS SDS Max Adapter

Dust Extraction Drill Bit

Time SavingsUp to50%Per Anchor

Drilling SpeedUp to25%Faster

Speed Clean Bits offer a range of sizes to fit both SDS-Plus® and SDS-max® hammers

THE NEWEST INNOVATION FROM BOSCHThe traditional drill-blow-brush-blow method requires six steps and a time invest-ment of more than three minutes per anchor. Speed Clean™ bits when connected to a vacuum can eliminates hole cleaning steps from the standard anchoring process and reduces the start-to-finish install time by 50%.


TABLE OF MULTIPLIERS

Diameter of a circle X 3.1416 = Circumference.Radius of a circle X 6.283185 = Circumference.Square of the radius of a circle X 3.1416 = Area.Square of the diameter of a circle X 0.7854 = Area.Square of the circumference of a circle X 0.07958 = Area.Half of the circumference of a circle X half its diameter = Area.Circumference of a circle X 0.159155 = Radius.Square root of the area of a circle X 0.56419 = Radius.Circumference of a circle X 0.31831 = Diameter.Square root of the area of a circle X 1.12838 = Diameter.Diameter of a circle X 0.866 = Side of an inscribed equilateral triangle.Diameter of a circle X 0.7071 = Side of an inscribed square.Circumference of a circle X 0.225 = Side of an inscribed square.Circumference of a circle X 0.282 = Side of an equal square.

TABLE OF MULTIPLIERS

Diameter of a circle X 0.8862 = Side of an equal square.Base of a triangle X half the altitude = Area.Multiplying both diameters and .7854 together = Area of an ellipse.Surface of a sphere X one-sixth of its diameter = Volume.Circumference of a sphere X its diameter = Surface.Square of the diameter of a sphere X 3.1416 = Surface.Square of the circumference of a sphere X 0.3183 = Surface.Cube of the diameter of a sphere X 0.5236 = Volume.Cube of the circumference of a sphere X 0.016887 = Volume.Radius of a sphere X 1.1547 = Side of an inscribed cube.Area of its base X one-third of its altitude = Volume of a cone or pyramid, whether round, square or triangular.Area of one of its sides X 6 = Surface of a cube.Altitude of trapezoid X one-half the sum of its parallel sides = Area.

CONCRETE TOOLS

TORPEDO GROOVER®

56” long, machine tooled, high grade aluminum, cuts straight control joint 1-3/8” or 1-3/4” deep, also available in 48”, 36” and 24” lengths.


STRAIGHTEDGESAvailable in 4’ to 20’ lengths with kerfed edges and welded end caps. Straightedges are lightweight, durable, easily cleaned and hold a true edge indefinitely. Actual size is 1-1/2” x 3-1/2”, duplicating the exact size and “feel” of a wooden 2x4 makes this the perfect tool for screeding concrete without the problems of warping and waste using wood straightedges or the bulkiness and weight of standard stock aluminum. This is truly the cement mason’s choice! Special order sizes available.• Extruded to +- 1/16” tolerance in 10’ for straightness.• Aluminum alloy is heat-treated 60/61 T6.• Tensile strength 30 - 35,000 lbs. per square

inch.• Conforms to federal specifications

QQ/A250/11 and ASTM B209.Also available: 1” x 3” - 4’ - 12’1-3/4” x 4” - 8’ - 20’2” x 5” - 10’ or 24’

Tools &Equipm

ent

HAND FLOATSAND SPREADERS

Plaster Hand Floats

168

Molded Rubber Floats

Concrete Spreader

• Very dense texture.• Molded black sponge rubber.• Features a comfortable wood handle.

No. SizePL395 8”x4”x5/8”PL398 10”x4”x5/8”

• For rough texture surfaces.• Rubber float pad is securely cemented to flat aluminum back.• Features a comfortable wood handle.

No. SizePL374 8”x4”x5/8”PL382 10”x4”x3/4”

Course Cell Rubber Floats

Concrete Hand Floats

• Wears like magnesium for extremely long life.• Laminated canvas-resin is 3/8” thick with broken-in face. • Wood handle.• Ready to use.

A) Round EndsNo. SizeCF501 16”x3-1/2” CF502 18”x3-1/2”CF524 20”x3-1/2”

B) Square EndsNo. SizeCF503 12”x3-1/2”CF504 14”x3-1/2”CF505 16”x3-1/2” CF506 18”x3-1/2”CF507 20”x3-1/2”

C) Wide SizesNo. SizeCF529 12”x5”CF530 14”x5”CF531 16”x5” • Does an excellent job on any

sand surface.• Special coarse green foam.• Features a comfortable wood handle.

No. SizePL602 10”x4”x3/4”PL601 12”x4”x3/4”PL607 12”x5”x3/4”PL603 12”x5”x1”

No. SizeCC917 19-1/2”x4” (Assembled)

Green Texture Floats

Laminated Canvas-Resin Floats

Rub Bricks

Fluted silicon carbide rub bricks make dressing down concrete fast and easy. The fluted bricks are on a diagonal which provides sharp edges to help with stubborn materials while carrying away excess debris. Contoured plastic handle minimizes fatigue. Preferred by finishers for its ease of use.

Fluted Rub Bricks

No. Size GritCF281 8”x3-1/2”x3/4” 20

Already broken-in and ready for smoothing and dressing down concrete. Contoured plastichandle minimizes fatigue.A good value for the price.

Broken-In Rub Brick

5”

A

B

C

Cali Kumalong® Concrete Spreader#14 Gauge Steel Blade

No. Size GritCF268 8”x3-1/2”x1-1/2” 20CF283 6”x3”x1” 20CF282 6”x3”x1” 60

• Made of strong and heavy-duty, yet lightweight steel.• Blade measures 19-1/2”x4”.• Comes with 60” heavy-duty pinned wood handle to prevent spinning.• Double-edged blade doubles the blade life.


BRACKETS AND HANDLES


Lighter design helps to eliminate concrete build up! Fits all 2- or 4-hole bull floats. No adapter needed.

Knucklehead® II Bull Float Bracket“The Original”

Button Handle Float Brackets

Button Extension Handles

EZY-Tilt® II

• Made of rugged lightweight aluminum.• 1:1 turning ratio of handle and pitch of blade.• Protected grease reservoir for longer wear.• Turning handle eliminates bending and lifting.• US Patent #4,335,485.No. CC296

• Quick and easy turning action.• Pitch of float blade controlled by turning handle.• Floats flush against the wall.• Fits all 2- or 4-hole fl oats.No. CC270

Note: Both EZY-Tilt® II and Orbit-er™ can be used with 1-3/8” and 1-3/4” extension handles.

Multi-Twist™ Brackets

These small brackets rotate 360° to work from all angles. Attach brackets to brooms, bull floats, edgers, fresnos or groovers. Twist the handle to tighten and set any angle. Adapters connect to push button or threaded handles.

A) Clevis Handle BracketUse with walking groovers, edgers, brooms and tools with clevis brackets.No. CC686

B) 6-Hole Handle BracketFits all 2- or 4-hole floats.No. CC687

C) 2-Hole Handle BracketAttach to fresnos, bull floats or brooms.No. CC688

D) Push Button Handle AdapterConnects to 1-3/8” and 1-3/4” button extension handles.No. CC689

E) Threaded Handle AdapterConnects to all threaded bull float handles.No. CC685Must use adapter with Multi-Twist™ brackets.

Rotating Concrete Tool Brackets

Use to convert a 4-hole mountto a 2-hole mount for more versatility. Plate is 4”x5”.No. CC287

Converter Plate

• Swaged handles are anodized aluminum which prevents hands from turning black caused by oxidation.

• Swaged ends nest and snap together with spring lock buttons.• Handles can be adapted for use on bull floats, fresnos, and all long

handle type construction tools.• Lightweight aluminum button handles for use with Kraft double tilt action float brackets.

• Popular western style.

Anodized Aluminum Button

1-3/8” Diameter Blue Anodized

No. SizeCC336B 6’ HandleCC331B 8’ HandleCC336-01 Single Button Clip

1-3/4” Diameter Blue AnodizedNo. SizeCC289SB 6’ HandleCC293SB 8’ HandleCC291SB 10’ Handle

Knucklehead® II Rebuild KitIncludes plastic bushing and snap rings.No. CC296K

• Made of rugged lightweight aluminum.• 1:1 turning ratio of handle and pitch of blade.• Eliminates bending and lifting.• Designed to fit all 2- or 4-hole bull floats.• Chain eliminates over-extension of bracket.No. CC294

Tools &Equipm

ent

466-

83-1

6

BULL FLOATS

170

MAGNESIUM IS 30% LIGHTER THAN ALUMINUMMULTI-RIBBED FOR EXTRA STRENGTHBROKEN-IN BLADE

Magnesium Bull Float4-Hole Bracket

Bull Floats

• Lightweight and longer lasting than aluminum alloy.• Blade is “broken-in,” curved and balanced to prevent digging.• Use with threaded handles.• Floats will accept any 4-hole adjustable tilting handle bracket. Comes complete with 4-hole bracket assembly (CC800).

Laminated Wood Bull Float4-Hole Bracket

• Long lasting, laminated float with bracket.• 1-3/4” thick; with stiffener embedded in ends of float.• Includes 4-hole threaded bracket.

Square End

“H” Bracket

“H” Bracket

No. SizeCC781 36”x7-1/4”CC782 48”x7-1/4”CC783 60”x7-1/4”

No. SizeCC981 24”x7-1/4”CC985 36”x7-1/4”CC986 48”x7-1/4”

Bronze Bull Float Groover BitUse bull float as groover. Attaches with two thumbscrews. Mount as many groovers as needed. Works on 8” wide bull floats.

No. Bit Depth Radius WidthCC940 3/4” 1/4” 1/2”CC941 1” 1/4” 1/2”CC942 1-1/2” 1/4” 1/2”CC943 2” 1/4” 1/2”

Big “D” Blue Steel Bull FloatWith EZY-Tilt® II Bracket

• Carbon blue steel blade, rounded ends for a super smooth finish.• Heavy-duty 4” C-Channel design for extra regidity and flatness.• Use button handle (1-3/8” or 1-3/4”).

No. SizeCC748 36”x12”CC750 48”x12”CC749 60”x12”CC751 72”x12”

Cali Mahogany Bull Float

• Made of Asian Mahogany wood.• Smooth 7-1/4” wide by 3/4” thick wood face.

• Handle bracket will accept Fresno/Broom Adapter (CC295) for 1-3/4” or 1-3/8” diameter button handles, Fresno Trowel Adapter

(CC662) for threaded handles.• Float can also be fitted with a 5’ or 6’ clevis wood handle.

2-Hole Bracket Bar

2-Hole Bracket BarNo. SizeCC982 24”x7-1/4”CC983 36”x7-1/4”CC984 48”x7-1/4”

• Steel “H” Style bracket supports float working surface.• Bracket Bar accepts any 2-hole fixed or tilt bracket float brackets.

No. SizeCC735 36”x8”CC801 42”x8”CC745 45”x8”CC802 48”x8”CC754 54”x8”CC760 60”x8”CC761 72”x8”

Round EndNo. SizeCC736 36”x8”CC742 42”x8”CC743 45”x8”CC803 48”x8”CC744 54”x8”CC804 60”x8”CC808 72”x8”

Fresno Float WeightFits in Big “D” channel. 5 lb. iron weight. Using 2 for balance is recommended.No. CC755 (each)

“H” Bracket

2-Hole Bracket


FRESNO TROWELSAND SCREEDS


All-Angle Steel Fresno TrowelsCarbon Steel or Blue Steel

Fresno Trowels

• Made of high quality tempered steel for a perfect finish.• 360 Degree all-angle bracket lets you work at any angle.• Use fresno adapters for handle attachment.• Attach bronze fresno groover bit for grooving.• Use with clevis handle or adapter.

Center Line GrooverGroover is adjustable on any 5” wide fresno. Leaves a clear, fine line in concrete. Slide groover to proper position and tighten. Great for decorative concrete applications. No. Size CC013 1/4”

Bronze Fresno Trowel Groover BitsChange your fresno into a long-handledgroover by simply turning the two thumbscrews. Use more than one to make parallel grooves. 1/4” radius. Fits 5” wide fresnos.No. Bit DepthCC622 1/4”CC623 1/2”CC625 3/4”CC626 1”

Kraft screeds are made of Genuine Extru-Lite Magnesium™. These screeds are built for strength and rigidity but lightweight enoughfor those big jobs. Ends are capped to prevent concrete from building up inside. Extra end caps are available.No. Size No. SizeCC606 6’ CC614 14’CC608 8’ CC616 16’CC610 10’ CC619 18’CC612 12’ CC620 20’

• Round ends and wider working surface prevent marking and gouging while creating a smooth finish.

• Includes Knucklehead® II bracket (CC296), but can be used with any tilting bracket.

• 7” Wide blade allows user to finish close to walls and obstruction with-out bracket interference.

• Use with button handle.

Carbon SteelNo. SizeCC849 24”x5”CC850 30”x5”CC851 36”x5”CC852 42”x5”CC853 48”x5”

Blue SteelNo. SizeCC849B 24”x5”CC850B 30”x5”CC851B 36”x5”CC852B 42”x5”CC853B 48”x5”

No. SizeCC840B 36”x7”CC841B 48”x7”

Fresno Trowel with Swivel BracketCarbon Steel or Blue Steel

• Made of high quality tempered steel with square steel mounting.• 360 Degree all-angle bracket lets you work at any angle.• Round end fresno eliminates marking or gouging slabs.• Bracket to be used with clevis handle or adapter.

Carbon SteelNo. SizeCC618 18”x5”CC624 24”x5”CC630 30”x5”CC636 36”x5”CC642 42”x5”CC648 48”x5”

Blue SteelNo. SizeCC618B 18”x5”CC624B 24”x5”CC630B 30”x5”CC636B 36”x5”CC642B 42”x5”CC648B 48”x5”

7” Wide Blue Steel Fresno40% More Finishing Area

• Finish and edge in one pass.• Carbon steel blade with 1/2” radius edger on one end.• Great tool for sidewalks and decorative concrete.• 360 Degree swivel bracket lets you work at any angle.• Fresno groover bits can also be added.• Use with clevis handle or adapter.

Round End Fresno with Edger

Magnesium Screed30% Lighter than Other Aluminum Screeds

Easy Grip1-1/2” x 3-1/2”

No. Size RadiusCC618FE 18”x5” 1/2”CC624FE 24”x5” 1/2”

Screeds

Tools &Equipm

ent

GROOVERS

172

Kraft 100% Bronze GrooversCuts Smooth, Clean GroovesLongest Wearing One-Piece CastingHand PolishedMade in the USA

• Converts any wood handled tool into a walking tool in seconds.• Thumb screws hold aluminum bracket securely fixed in place.• Fits all wooden handled bronze, stainless steel and blue steel hand

tools.No. CC495

Bronze Rocker Groovers

Ultra Hard GrooverHeavy-Duty Iron

Handle adapters for all-steel groovers and hand tools. Three styles: swivel action, 2-hole single action, or 4-hole single action.No. Description CC653 4-Hole Single Action Plate AdapterCC659 2-Hole Single Action AdapterCC660 2-Hole Swivel Action Adapter

Handle Adapter Plates

Quick Change BracketConverter Bracket for Hand-Held Tools

SMALL BIT6”x2”No. CF301

3/16” Deep Bit3/16” Wide BitRadius 1/4”

LARGE BIT6”x4-1/2”No. CF303


BIG BIT6”x4-1/2”No. CF304


NARROW BIT6”x4-1/2”No. CF305


DEEP BIT6”x4-1/2”No. CF314

1” Deep Bit1/2” Wide BitRadius 1/4”

Wood Handle

2-HoleSingle Action

2-HoleSwivel Action

4-HoleSingle Action

Curved blade and tilt handle give plenty of knuckle room.

No. Size Bit Depth CF306 5”x1-3/4” 1/4”x1/4” 1/8”CF307 5”x1-3/4” 3/8”x3/8” 1/4”

This west coast favorite is made of a special formula chrome-nickel-iron metal that is long lasting. 6” Wood handle with steel clevis tightens to various angles.No. Size Depth Width CF404 3-1/2”x4” 1/4” 3/8”

Groovers


EDGERS, GROOVERSAND ROLLER TAMPS


Tube Edgers Walking Groovers

No. Diameter CF382 12”CF383 16”CF384 18”CF385 24”

No. DiameterCF386 30”CF387 36”CF388 48”

• Belt polished surface for cutting clean, smooth edges.• Used for creating chamfered edges on round support piers.• Made of long wearing one-piece bronze with 1” lip and 1/2” radius and

turned up ends.• Slope on the pier edge can be varied depending upon wetness of con-

crete and the angle and pressure of the Chamfer Tube Edger.

Groovers are made of high quality cast aluminum with broken-in face. Bit size matches hand groovers (CF304 and CF314) in depth. Adjustable EZY-Tilt® II bracket (CC294) allows finisher to use tool at the perfect angle. Use with button handles.

Step-Saver® Groovers

Bronze Chamfer Tube Edger

• Easy to use, saves time and increases the quality of your work.• Must-have tools for every concrete finisher.

• Used to groove vertical and horizontal control joints into the face of slabs, curbs and steps.• Simply work the groover between the form and concrete for a perfect joint every time.No. SizeCF007 12”L x 3/8”W x 3/4”DCF008 12”L x 1/2”W x 1”DCF009 12”L x 7/8”W x 3/4”DCF010 6”L x 1/2”W x 1”D

Step-Saver® Edgers• Make finishing step corners a breeze.• Insert and work between forms and concrete at step corners.• Once risers are stripped perfect rounded corners remain.No. SizeCF001 10”L x 3/8”RCF002 10”L x 1/2”RCF003 10”L x 3/4”R

Cut Perfect Control Joints and Corners Before Removing the Forms

Concrete Step-Saver® Tools

Walking Airplane GrooversWith EZY-Tilt ® II Bracket

Concrete Roller TampsDouble Roller Tamps• 5” Roller diameter. Two rollers per tamp head.• Depresses the aggregate and brings the fat to the surface in a uniform

manner.• Levels the slab in half the time and does a better job then other con-

ventional tampers.• Prepares the surface for a smoother finish.• Rollers fit 1-3/8” button end handles.

No. SizeCC948A 18”CC952A 36”CC958A 48”

Single Bit GrooversA) 24”x8” Groover Bit BitNo. Depth WidthBig BitCC304AS 3/4” 7/8”Deep BitCC314AS 1” 1/2”

Double Bit GrooversB) 24”x8” Groover Bit BitNo. Depth WidthBig BitCC304A 3/4” 7/8”Deep BitCC314A 1” 1/2”

Tools &Equipm

ent

CONCRETE TOOLS

174

Concrete ToolsAluminum ChiselsUse these aluminum chisels to dress and finish imprinted textured concrete.No. SizeCC115 1-1/2”CC110 3”CC116 4”CC117 8”CC118 12”CC111 18”

Straight Arrow Groover for Control JointsIdeal Tool for Cutting Long Straight Control JointsThese high-grade aluminum groovers are designed to cut long straight control joints. The design features a 4” wide top, providing greater sta-bility. The bolted sight marker helps cut perfectly long straight control joints. The adjustable bracket assembly slides on a center track for easy placement. Use with clevis handle or adapter. Bit BitNo. Size Width DepthCC006W-125 24” 1/4” 1-1/4”CC006W-150 24” 1/4” 1-1/2”CC006W-175 24” 1/4” 1-3/4”CC003W-125 36” 1/4” 1-1/4”CC003W-150 36” 1/4” 1-1/2”CC003W-175 36” 1/4” 1-3/4”CC004W-125 48” 1/4” 1-1/4”CC004W-150 48” 1/4” 1-1/2”CC004W-175 48” 1/4” 1-3/4”CC005W-125 60” 1/4” 1-1/4”CC005W-150 60” 1/4” 1-1/2”CC005W-175 60” 1/4” 1-3/4”

Double End Deco “V” Jointer

CC118

CC116CC115

Utility Stamps

Gauge Rake

SewerWater

Sight Marker

Sliding Track

Made of lightweight aluminum. Adjusts up to 2” for uniform coating of surface. Comes with 3-piece snap style aluminum threadedhandle (CC263).No. DescriptionCC975 24” Rake with Handle

Flexible Gunite ShoesGray flexible plastic lets you work on gunite, epoxy or sealers with ease of movement. Protect your work and bring air bubbles outof the application. (13) fi rmly attached 3/4” (overall length) steel spikes cover the bottom of the shoe. Two adjustable nylon straps securely hold gunite shoe to work boot.No. DescriptionHC177 Flexible Gunite Shoes (Pair)

Jointer is made of high quality aluminum. Use in conjunction with texture mats for touch up or cutting of small grooves. Groover designed to cut 5/8” or 3/4” joints. A “must-have” tool for every fi nisher.No. Size DescriptionCC112 12” “V” Jointer (5/8” x 3/4”)

Stamp concrete with locations of water and sewer lines. 3” letters made of longwearing cast aluminum.No. DescriptionCF405 Water Utility StampCF403 Sewer Utility Stamp

30” long decorative salt roller. Make small decorative impressions in concrete using rock salt. Use with 1-3/8” diameter snap button handles.No. CC957

Salt Roller


MIXERS, SHOVELS ANDOTHER CONCRETE TOOLS


Shovels

Sliders & Kneeboards

Silverback™ Professional SeriesStainless Steel Jiffy Mud and Paint MixersFits containers 3 gallons or larger. 21” long, 1/2” shaft, top diameter 4-1/2”, bottom diameter 5”, depth 5”. For use in a 1/2” drill.No. DC409

Denver Sliders

Egg Beater MixerUse to mix thinset, grout and concrete products. Platedsteel is easy to use and easy to clean. The 30” overall length of the tool works easily in 5 gallonbuckets. The 7/16” steel hex shaft works in 1/2” or larger drills.No. DC716

For small containers, 2 gallons or less. 10-1/2” long, 1/4” shaft, top diameter 2-3/8”, bottom diameter2-5/8”, head depth 2-1/2”. For use in a 3/8” drill.No. DC408

Made with top quality #16 gauge stainless steel for an extra smooth slid-ing surface. Round edges and corners with specialnesting design. Built-in toe brackets for easy back-and-forth motion. Weight 11 lbs.No. SizeCC152 28”x8-1/2” (Pair)

EZ-Kneeler™ KneeboardComfortable, Multi-Purpose Kneeboard

• 14 Gauge tempered steel blades for superior strength.• Forward turn step for comfort and firmer footing.• Lacquered hardwood handles are double riveted.• Wood and fiberglass handles available.

GG866

GG867

48” Wood

Handles

GG861

GG864

Long Handle ShovelsNo. DescriptionGG861 Square Point ShovelGG861F Square Point ShovelGG864 Round Point ShovelGG864F Round Point Shovel

48” Fiberglass Handles GG864F

GG861F

Round Shaft

Round Shaft

Hex Shaft

• Washable and chemical resistant.• 1-1/2” Thick foam cushion secured to 14”x24” polypropylene tray.• Working surface is 13-1/2”x19-1/4”.• Weighs only 2 lbs.No. WL069

31” “D” Wood

Handles

Floor/Form ScraperCleans and shaves all types of material from concrete and wood surfaces. Great for concrete form cleaning. Fitted with 54” metal handle. 36” and 48” scrapers come with handle braces.No. SizeGG013 7”GG014 14”GG018 18”GG022 22”GG023 36”GG024 48”

Scrapers

Short Handle ShovelsNo. DescriptionGG866 Round Blade Drain SpadeGG867 Square Blade Drain Spade

Mixers

Tools &Equipm

ent

FINISHING TROWELS

High Carbon Steel – DuraSoft® Handle

176

EDI Part# Size (in.) Size (mm) Handle 15265 MXS54D 10 x 3 254 x 76 Curved 13201 MXS55D 10 x 4 254 x 102 Curved 12123 MXS91D 10½ x 4½ 267 x 114 Curved 13893 MXS114D 11 x 4 279 x 102 Curved 12105 MX1D 11 x 4½ 279 x 114 Straight 12125 MXS1D 11 x 4½ 279 x 114 Curved 13459 MXS3D 11 x 4¾ 279 x 121 Curved 13458 MXS2D 11½ x 4½ 292 x 114 Curved 12131 MXS4D 11½ x 4¾ 292 x 121 Curved 13205 MXS56D 12 x 3 305 x 76 Curved 13207 MX62D 12 x 4 305 x 102 Straight 13209 MXS62D 12 x 4 305 x 102 Curved 12133 MXS7D 12 x 5 305 x 127 Curved 12135 MXS13D 13 x 5 330 x 127 Curved 13223 MX57D 14 x 3 356 x 76 Straight 13225 MXS57D 14 x 3 356 x 76 Curved 15272 MXS58D 14 x 3½ 356 x 89 Curved 13227 MX64D 14 x 4 356 x 102 Straight 13229 MXS64D 14 x 4 356 x 102 Curved 15275 MXS65D 14 x 4½ 356 x 114 Curved 13233 MXS73D 14 x 4¾ 356 x 121 Curved 13235 MXS145D 14 x 5 356 x 127 Curved 13245 MXS60D 16 x 3 406 x 76 Curved 15279 MXS61D 16 x 3½ 406 x 89 Curved 13282 MX66D 16 x 4 406 x 102 Straight 13249 MXS66D 16 x 4 406 x 102 Curved 15283 MXS67D* 16 x 4½ 406 x 114 Curved 15347 MXS68D* 16 x 4¾ 406 x 121 Curved 13251 MXS165D* 16 x 5 406 x 127 Curved 15290 MXS75D* 18 x 3 457 x 76 Curved 15287 MXS76D* 18 x 3½ 457 x 89 Curved 13267 MX81D* 18 x 4 457 x 102 Straight

EDI Part# Size (in.) Size (mm) Handle 13520 MXS64FR 14 x 4 356 x 102 Hardwood 13521 MXS64FRD 14 x 4 356 x 102 DuraSoft®

13522 MXS66FR 16 x 4 406 x 102 Hardwood 13523 MXS66FRD 16 x 4 406 x 102 DuraSoft®

16872 MXS75FR* 18 x 3 457 x 76 Hardwood 16873 MXS75FRD* 18 x 3 457 x 76 DuraSoft®


13937 MXS815FR 18 x 5 457 x 127 Hardwood 13939 MXS815FRD 18 x 5 457 x 127 DuraSoft®


13528 MXS205FR* 20 x 5 508 x 127 Hardwood 13529 MXS205FD* 20 x 5 508 x 127 DuraSoft®





• Highest grade hardened and tempered spring steel blade, properly shaped.• Aluminum alloy Xtralite® mounting is lightweight but very strong.• Beveled work edges prevent surface aggregate popping.• Resilient DuraSoft® handle provides a soft feel, reduces fatigue and offers excellent durability.• Straight or curved handle.• Sold 1 per inner pack / 12 per outer pack, 6 per outer pack where noted with *. Fully Rounded High Carbon Steel

13269 MXS81D* 18 x 4 457 x 102 Curved 13263 MXS77D* 18 x 4½ 457 x 114 Curved 15345 MXS82D* 18 x 4¾ 457 x 121 Curved 13279 MXS815D* 18 x 5 457 x 127 Curved 13273 MXS20D* 20 x 4 508 x 102 Curved 13277 MXS205D* 20 x 5 508 x 127 Curved 13895 MXS225D* 22 x 5 559 x 127 Curved 13197 MXS24D* 24 x 4 610 x 102 Curved 13199 MXS245D* 24 x 5 610 x 127 Curved

• Highest grade hardened and tempered spring steel blade, properly shaped.• Aluminum alloy Xtralite® mounting is lightweight but very strong.• Choice of resilient DuraSoft® handle or smooth, natural finish hardwood handle.• Sold 1 per inner pack / 12 per outer pack, 6 per outer pack where noted with *.

MARSHALLTOWN The Premier Line



POOL TROWELS& HAND FLOATS

High Carbon Steel Pool Trowels


EDI Part# Rivets Size (in.) Size (mm) Handle 13164 SP83 3 8 x 3 203 x 76 Hardwood 13166 SP83SD 3 8 x 3 203 x 76 DuraSoft®

13110 SP10 3 10 x 3 254 x 76 Hardwood 13109 SP10SD 3 10 x 3 254 x 76 DuraSoft®

13167 SP12S3 3 12 x 3½ 305 x 89 Hardwood 13168 SP12SDS3 3 12 x 3½ 305 x 89 DuraSoft®

13112 SP12 5 12 x 3½ 305 x 89 Hardwood 13111 SP12SD 5 12 x 3½ 305 x 89 DuraSoft®

13169 SP14S5 5 14 x 4 356 x 102 Hardwood 13174 SP14SDS5 5 14 x 4 356 x 102 DuraSoft®

13114 SP14 6 14 x 4 356 x 102 Hardwood 13113 SP14SD 6 14 x 4 356 x 102 DuraSoft®

13135 SP14D 6 14 x 4 356 x 102 DuraSoft®

13116 SP16* 8 16 x 4½ 406 x 114 Hardwood 13117 SP16SD* 8 16 x 4½ 406 x 114 DuraSoft®

13137 SP16D* 8 16 x 4½ 406 x 114 DuraSoft®

13118 SP815* 10 18 x 5 457 x 127 Hardwood 13119 SP815SD* 10 18 x 5 457 x 127 DuraSoft®

13175 SP164S12* 12 16 x 4 406 x 102 Hardwood 13176 SP164SDS12* 12 16 x 4 406 x 102 DuraSoft®

13138 SP164 12 16 x 4 406 x 102 Hardwood 13120 SP205* 12 20 x 5 508 x 127 Hardwood 13121 SP205SD* 12 20 x 5 508 x 127 DuraSoft®

13925 SP22 14 22 x 4 559 x 102 Hardwood 13927 SP22D 14 22 x 4 559 x 102 DuraSoft®




• Highest grade hardened and tempered spring steel blade, properly shaped.• Short aluminum alloy Xtralite® mounting is lightweight but very strong.• Blade is flexible enough to conform to almost any radius• Choice of resilient DuraSoft® handle or smooth, natural finish hardwood handle.• Sold 1 per inner pack / 12 per outer pack, 6 per outer pack where noted with *.

Cast Magnesium Hand Floats• Cast from the finest magnesium.• Designed with just the right broken-in shape.• Cast construction allows more knuckle clearance.• Placement of the handle gives the float perfect balance.• Sold 6 per inner pack / 6 per outer pack.

Beveled End Magnesium Hand Floats


EDI Part# Size (in.) Size (mm) Handle 14607 148 16 x 3-1/8 406 x 79 Plastic 14613 148D 16 x 3-1/8 406 x 79 DuraSoft®


EDI Part# Size (in.) Size (mm) Handle 14606 142 12 x 3-1/8 305 x 79 Hardwood 14609 142D 12 x 3-1/8 305 x 79 DuraSoft®

14604 145 16 x 3-1/8 406 x 79 Hardwood 14610 145D 16 x 3-1/8 406 x 79 DuraSoft®




• Extruded from very hard, durable, lightweight magnesium.• Our most popular float design.• Comfortable handle is positioned to give the tool perfect balance.• Recommended for use with air entrained concrete.• Magnesium floats produce a smoother finish than wood.• Sold 6 per inner pack / 6 per outer pack.

If you don’t find the tool or size you need,

please give us a call.

Tools &Equipm

ent

2036

-67-

16

EDGERS, PLACERS, BRACKETS & ADAPTERS

178

Size Size Radius Lip EDI Part# in. (mm) in. (mm) in. (mm) 13960 CE550B 6 x 3 152 x 76 1/8 (3) 3/8 (10) 13962 CE551B 6 x 3 152 x 76 1/4 (6) 3/8 (10) 13964 CE552B 6 x 3 152 x 76 3/8 (10) 1/2 (13) 13966 CE553B 6 x 3 152 x 76 1/2 (13) 5/8 (16) 13951 CE540B 6 x 3 152 x 76 3/4 (19) 7/8 (22) 13968 CE554B 6 x 4 152 x 102 1/8 (3) 3/8 (10) 13970 CE555B 6 x 4 152 x 102 1/4(6) 3/8 (10) 13972 CE556B 6 x 4 152 x 102 3/8 (10) 1/2 (13) 13974 CE557B 6 x 4 152 x 102 1/2 (13) 5/8 (16) 13952 CE541B 6 x 4 152 x 102 5/8 (16) 7/8 (22) 13976 CE558B 6 x 4 152 x 102 3/4 (19) 7/8 (22) 13953 CE542B 6 x 4 152 x 102 1 (25) 1-1/8 (29) 13978 CE559B 6 x 6 152 x 152 1/8 (3) 3/8 (10) 13980 CE560B 6 x 6 152 x 152 1/4 (6) 3/8 (10) 13982 CE561B 6 x 6 152 x 152 3/8 (10) 1/2 (13) 13984 CE562B 6 x 6 152 x 152 1/2 (13) 5/8 (16) 13954 CE543B 6 x 6 152 x 152 5/8 (16) 7/8 (22) 13986 CE563B 6 x 6 152 x 152 3/4 (19) 7/8 (22) 13955 CE544B 6 x 6 152 x 152 1 (25) 1-1/8 (29) 13956 CE545B 9 x 6 229 x 152 1/4 (6) 3/8 (10) 13957 CE546B 9 x 6 229 x 152 3/8 (10) 1/2 (13) 13958 CE547B 9 x 6 229 x 152 1/2 (13) 5/8 (16) 13961 CE548B 9 x 6 229 x 152 3/4 (19) 7/8 (22)

Blue Steel Hand Edger

• High grade blue steel blade with sturdy steel mounting.

• Straight ends.

Rock-It™ / Rocket-It™ 2.0 Float Brackets• Allows multi-angle floating.• Enables use with extension handles for extremely long ranges.• Full pitch controlled by half turn of handle.• Fits all magnesium bull floats without adapter plates.• Fits all push button handles – 1-3/8” (35mm) and 1-3/4” (4mm) without additional adapters.

All Aluminum Placer• Aluminum construction, powder

coated with soft grip end-cap.• Braced for additional strength.• 60” (1524mm) long.

QLT by marshalltown

QLT by marshalltown

QLT by marshalltown

Blade Blade EDI Part# Description Size (in.) Size (mm) 14753 AP753 Placer w/o Hook 19-1/2 x 4 495 x 102

Blade Blade EDI Part# Description Size (in.) Size (mm) 14251 16-RKT-N Rock-It™ N/A N/A 14799 BF9 Rock-It™ 2.0 N/A N/A


Rock-It™

“Twister” Bull Float Bracket• Cast aluminum bracket.• Universal mounting that fits any two or four-hole bull float without adapters.• Gear driven – continuous adjustment.• Gears maintain pitch of blade.• Fits 1-3/8” (35mm) and 1-3/4” (44mm) push button handles.

QLT by marshalltown

Blade BladeEDI Part# Description Size (in.) Size (mm) 16191 T91 “Twister” N/A N/A

“Twister”

Mini Rock-It™ Adjustable Angle Adapters• Allows handle placement in any position within a 180° sweep.• Turn handle clockwise to lock in position; counter clockwise to unlock.• Connects push button handles to edgers, groovers, fresnos and bull floats.

“Twister”

Rock-It™ 2.0

EDI Part# Diameter 14252 16-MR 1-3/8” (35mm) 14253 16-MRL 1-3/4” (44mm)


BUMP CUTTER


Magnesium Bump Cutter Kits• Long-lasting magnesium alloy.• Cuts high spots and fills low spots.• Great tool for use in highway paving and on floors requiring high “F” (flatness) numbers.• Sturdy bracket mount an strut mount with quick-disconnect outriggers.• Kits include bump cutter, three 1-3/4” x 6’ (44mm x 1.8M) handles, bracket and outriggers on 8’ (2.4M) and longer blades.• Quick and easy to assemble.• Sold 1 per inner pack / 1 per outer pack.

MARSHALLTOWN The Premier LineBump Cutter Kit w/“Twister” Bracket

EDI Part# Size (in.) Size (metric) 10527 BC15358T91 1½” x 3½” x 8’ 38mm x 89mm x 2.4M 10528 BC153510T91 1½” x 3½” x 10’ 38mm x 89mm x 3M 10529 BC153512T91 1½” x 3½” x 12’ 38mm x 89mm x 3.7M 10530 BC153514T91 1½” x 3½” x 14’ 38mm x 89mm x 4.3M 10531 BC153516T91 1½” x 3½” x 16’ 38mm x 89mm x 4.9M 10532 BC153520T91 1½” x 3½” x 20’ 38mm x 89mm x 6.1M 10533 BC153524T91 1½” x 3½” x 24’ 38mm x 89mm x 7.3M 10534 BC246T91 2” x 4” x 6’ 51mm x 102mm x 1.8M 10535 BC248T91 2” x 4” x 8’ 51mm x 102mm x 2.4M

EDI Part# Size (in.) Size (metric) 10536 BC2410T91 2” x 4” x 10’ 51mm x 102mm x 3M 10537 BC2412T91 2” x 4” x 12’ 51mm x 102mm x 3.7M 10538 BC2414T91 2” x 4” x 14’ 51mm x 102mm x 4.3M 10539 BC2416T91 2” x 4” x 16’ 51mm x 102mm x 4.9M 10541 BC2420T91 2” x 4” x 20’ 51mm x 102mm x 6.1M 10542 BC2424T91 2” x 4” x 24’ 51mm x 102mm x 7.3M 10543 BC2516T91 2” x 5” x 16’ 51mm x 127mm x 4.9M 10544 BC2520T91 2” x 5” x 20’ 51mm x 127mm x 6.1M 10545 BC2524T91 2” x 5” x 24’ 51mm x 127mm x 7.3M

Quick-disconnect Collar

Quick-disconnect Outriggers

SCREED

• Simple but durable power unit utilizes a maintenance-free flexible drive shaft design.

• Powered by a Honda GX35 4-stroke gasoline engine.• Control handle is adjustable to operator height and sports a convenient finger-

tip throttle control.• Easily maneuver around obstructions without marring slab surface.• Unique light-weight blade design (1.95 pounds per linear foot) requires no tools

to remove and is ideal for form-to-form or wet screeding.• Blade sizes available in lengths from 6 to 16 feet (1.8 to 4.8 meters).

DSGPULWIdeal for form-to-form and wet screeding The DuoScreed sports a unique blade profile that enables just one operator to quickly and accurately strike off concrete floors using a single blade for both form-to-form and wet screeding.

DuoScreed

SpecificationsBlade Construction AluminumBlade Width 6, 8, 10, 12, 14, 16 ft.Engine GX-35SATEngine Power 1.3 HP (1.0kW)Power Unit Weight 32 lbs. (14.5kg)Drive System Flexible-Shaft

Tools &Equipm

ent

CONCRETE TOOLSROSEBURROUGH TOOL, MFG

180

Concrete Tampers• Made with the splash away type steel bottom.• Reinforced to stay flat and welded at all contact points.• Handle has the right balance for easy all-day use.• Rubber grips on handles for safe, sure handling.• Braces on both ends.

No. SizeHT34 7-1/2” x 34”HT46 7-1/2” x 46”HT58 7-1/2” x 58”

Blue Crucible Steel Walking Edgers• Made of quality blue crucible steel for the professional tradesman.• Starter connectors and handles sold separately.

No. Size RadiusRTC-022076 9” x 6” 1/8”RTC-015832 9” x 6” 1/4”RTC-015887 9” x 6” 3/8”RTC-015818 9” x 6” 1/2”WE964 9” x 6” 5/8”RTC-015863 9” x 6” 3/4”WE966 9” x 6” 1”

Blue Crucible Walking Edgers forGroover Attachments • Made of quality blue crucible steel for the professional tradesman.• Made especially for use with a groover attachment.• Slip the groover attachment on and simply turn the two thumbscrews.• Use more than one to make parallel grooves.

No. Size RadiusWE5121 5” x 12” 1/4”WE5122 5” x 12” 3/8”WE5123 5” x 12” 1/2”WE5125 5” x 12” 3/4”

No. Size RadiusWE9100 9” x 10” 1/8”RTC-016914 9” x 10” 1/4”RTC-016969 9” x 10” 3/8”RTC-016907 9” x 10” 1/2”WE9104 9” x 10” 5/8”RTC-016945 9” x 10” 3/4”WE9106 9” x 10” 1”

Double Roller Tampers• Ends wading in the mix.• Tamps and levels.• Use on inclines.• Rollers are 5” in diameter.• Excellent for depressing the aggregate.• Brings fat to the surface and “The job is done in half the time with a roller tamp.”

Rock Salt Roller• Designed for the jobs that require a rock salt finish.• Includes a standard bracket for use with starter connectors.

No. SizeSR418 18”SR424 24”SR430 30”

No. SizeRRT242 24”RRT362 36”RRT482 48”


CONCRETE TOOLSROSEBURROUGH TOOL, MFG


Hard Steel Groovers - Walking Type• Made of a fine quality hard steel.• Bracket sold separately.

No. Size Radius Depth of GrooveSG812W 8” x 10” 1/4” 1/2”SG832W 8” x 10” 1/2” 1/2”SG814W 8” x 10” 1/4” 3/4”SG834W 8” x 10” 1/2” 3/4”SG854W 8” x 10” 3/4” 3/4”SG810W 8” x 10” 1/4” 1”SG830W 8” x 10” 1/2” 1”SG850W 8” x 10” 3/4” 1”SG8140W 8” x 10” 1/4” 1/4”SG8112W 8” x 10” 1/4” 1-1/2”SG8312W 8” x 10” 1/2” 1-1/2”SG8512W 8” x 10” 3/4” 1-1/2”SG8102W 8” x 10” 1/4” 2”SG8302W 8” x 10” 1/2” 2”SG8502W 8” x 10” 3/4” 2”SG81010W 8” x 10” 1” 1”

Hard Steel Groovers - Hand Type• Made of a fine quality hard steel.

No. Size Radius Depth of GrooveSG66140 6” x 6” 1/4” 1/4”SG6612 6” x 6” 1/4” 1/2”SG6632 6” x 6” 1/2” 1/2”SG6614 6” x 6” 1/4” 3/4”SG6634 6” x 6” 1/2” 3/4”SGRTC-007363 6” x 6” 3/4” 3/4”SG6610 6” x 6” 1/4” 1”SG6630 6” x 6” 1/2” 1”SG6650 6” x 6” 3/4” 1”SG661010 6” x 6” 1” 1”SG66112 6” x 6” 1/4” 1-1/2”SG66312 6” x 6” 1/2” 1-1/2”SG66512 6” x 6” 3/4” 1-1/2”SG66102 6” x 6” 1/4” 2”SG66302 6” x 6” 1/2” 2”SG66502 6” x 6” 3/4” 2”

Laminated Poplar Wood Bull Floats• Two-hole bracket.• Made of many strips of sturdy poplar wood laminated together with the

grain “on edge.”• Poplar is preferred for floating – the right porosity and strength.• Long-wearing, does not splinter.

Laminated Resin Glass Bull Floats• Two-hole setup.• Wears like steel.• Broken-in design.• 3/8” thick.

No. LengthRTC-100354 7-1/2” x 3’ FloatRTC-100361 7-1/4” x 4’ FloatRTC-100378 7-1/4” x 5’ FloatRTC-100385 7-1/4” x 6’ Float (Add a “B” for Braces)LWBF962 7-1/4” x 8’ Float (Add a “B” for Braces)

• Tee type bracket.

No. LengthLWBF36S 7-1/2” x 3’ FloatLWBF48S 7-1/4” x 4’ FloatLWBF60S 7-1/4” x 5’ Float

No. LengthLB7242 7” x 24”RTC-100491 7” x 30”LB7362 7” x 36”RTC-100453 7” x 42”LB7482 7” x 48”RTC-100415 7” x 60”RTC-100545 7” x 72”

Add a “B” for Braces

No. Size Radius Depth of GrooveSG2412W 12” x 14” 1/4” 1/2”SG2432W 12” x 14” 1/2” 1/2”SG2414W 12” x 14” 1/4” 3/4”SG2434W 12” x 14” 1/2” 3/4”SG2454W 12” x 14” 3/4” 3/4”SG2410W 12” x 14” 1/4” 1”SG2430W 12” x 14” 1/2” 1”SG2450W 12” x 14” 3/4” 1”SG24140W 12” x 14” 1/4” 1/4”SG24112W 12” x 14” 1/4” 1-1/2”SG24312W 12” x 14” 1/2” 1-1/2”SG24512W 12” x 14” 3/4” 1-1/2”SG24102W 12” x 14” 1/4” 2”SG24302W 12” x 14” 1/2” 2”SG24502W 12” x 14” 3/4” 2”SG241010W 12” x 14” 1” 1”

Tools &Equipm

ent

BROOMS & BRUSHES

182

• 100% black horsehair, staple set in half-round clear lacquered hard-wood block.

• Recommended Use: For sweeping smooth, dry floors, such as tile, linoleum, terrazzo, waxed and polished wood floors, etc.

• Length of Trim: 3 inches. / Includes No. M-60 Handle.No. 724 24-inch No. 736 36-inch (#99 Brace included)

SAME AS ABOVE EXCEPT:• Black plastic and black horsehair mixture.No. 712-X 12-inch (no handle) No. 724-X 24-inch No. 718-X 18-inch

No. 7 LiNe FLoor Brushes Beaver-TaiL CouNTer dusTers

osha-oraNge PLasTiC

• Unique block design allows for a special two-position bristle trim which makes this an ideal cleaning tool.

• Use in a straight-up position for cleaning open areas. For easy clean-ing of base boards and underneath kitchen equipment,

simply change angle of the brush. No flow through handle hole.• Stiff plastic bristles securely set in structural foam block work effective-

ly wet or dry. Acid resistant.• Size of block: 1-7/8” x 3” x 10”• Length of Trim: 1-3/4 inches. / Handle not included. No. 186 Blue crimped plastic

Bi-LeveL sCruB Brush

• Best Grade White Tampico fiber staple set in clear lacquered hardwood block with 6-3/4 inch red handle attached.• This is a heavily filled brush recommended for the professional contractor.• Block size: 6-1/2” L x 2” W• Length of Trim: 4 inches. No. 561 5 Rows wide

• Filling material is staple set in clear lacquered hardwood block.• Hang up hole in handle. • Brush face length: 9 inches. • Overall length: 13-1/2 inches. / Length of Trim: 2-1/2 inches.No. 54 Black horsehair

• Fiber is staple set in clear lacquered hardwood block with hang-up hole. • Brush face length: 9 inches. • Overall length: 13-1/2 inches. / Length of Trim: 2 inches.No. 55 Silver flagged plastic

WaTer PaiNT Brush

• Round Carbon Steel Wire. • Staple set in a wax

tumbled hardwood block with scraper and handle bracket attached. • For scaling and scraping old paint.• Length of Trim: 1-9/16 inches.• Scraper width: 6 inches.Block Size: 7-1/8” L x 2-1/4” W No. of rows: 6 x 19No. 5-SC-7 7-1/8” Block Size: 15” L x 2-1/4” W No. of rows: 6 x 38 No. 5-SC-15 15”

PaiNTers sCraTCh Brushes• Filled with OSHA orange poly corn for high visibility use. • Durable plastic will outlast natural fiber.• Will not absorb odors, mildew, rot or discolor. • Will not absorb water and rinses clean. • Wide flare on ends allows close sweeping to curbs.• Recommended Use: For wet or dry sweeping where a rugged broom is

required on rough surfaces such as concrete or asphalt street gutters, dairy barns, highway construction, etc.

• Length of Trim: 5 inches. / Handle not included. No. 1316-O 16-inch (Requires standard tapered handle)No. 1324-O 24-inch (Requires standard tapered handle)

With Scraper


BRUSHES


• Filling material is staple set in a high-tensile strength foam plastic block.• Will not absorb water. • Recommended for use where sanitation is required.• Size of block: 8 inches.• Length of Trim: 2 inches. No. 42 Green flagged plastic

• Fiber is staple set in a 12” x 1-1/4” hardwood block with handle. • Perfect for curbs, gutters and steps.• Length of Trim: 3 inches. No. 521 Yellow PolyNo. 523 Horsehair

ConCrete Finishing Brushes

Soft Grey Horsehair• Staple set in clear lacquered hardwood block.• Very light in weight. • The 72-inch handle and soft grey horsehair make it the ideal tool for applying a fine brushed finish on concrete.• Length of Trim: 2-1/2 inches. / No. M-72 Handle included.No. 2912 12-inch (No handle) No. 2930 30-inchNo. 2918 18-inch No. 2936 36-inchNo. 2924 24-inch

No. 99 Brace includedw/ 30” & 36” brushes.

• Staple set in clear lacquered hardwood block with one threaded handle hole.

• Three rows of filling material. / Hang up hole. • Used for applying a fine finish on newly poured concrete. • Handle not included (Requires standard threaded handle).2-1/2” Trim – Horsehair – Fine FinishNo. 2124-H 24-inch No. 2148-H 48-inchNo. 2136-H 36-inch3” Trim – Yellow Styrene – Fine FinishNo. 2136-Y 36-inch

VehiCle Wash Brush• Filling material is staple set in foam plastic block. • The 10-inch blocks have one threaded and one tapered handle hole.• Acid-resistant.• Although these high-quality brushes are recommended for use on all types of vehicles, some finishes may be more susceptible to scratching than others; always test in an inconspicuous area before use.• Will accommodate flo-thru handle.• Length of Trim: 2-1/2 inches.No. 1411-G Green flagged polystyrene

• Filling material is staple set in a wax tumbled hardwood block with hang up hole in handle.

• Block size: 20” L x 3” W• Length of Trim: 2 inches.No. 45 White Tampico

Short HandleFoam Plastic Block

• Filling material is staple set in a high-tensile strength foam plastic block.• Will not absorb water. • Recommended for use where sanitation is required.• Size of block: 20 inches.• Length of Trim: 2 inches. No. 43 Green flagged plasticNo. 77 Tampafil plastic

utility BrushesLong Handle Foam Plastic Block

20-Inch Handle

No. 77 shown

Fender Wash Brushes

• Filling material is staple set in a wax tumbled hardwood block with hang up hole in handle.• Block size: 8” L x 3” W• Length of Trim: 2 inches.No. 41 White Tampico

8-Inch Handle

Tools &Equipm

ent

BRUSHES AND CLEANERS

184

Riviera Brush Co .

Synpro Masonry Cleaner is a proprietary blend that eliminates the need to use harsh acids for cleaning, restoring and removing effl orescence from a number of surfaces including bricks, pavers,retaining walls and concrete driveways.• Removes excess mortar safely.• Removes e fflorescence.• An effective paver wash and prep prior to applying sealers.• Provides a light etch of concrete floors prior to staining.• General wash for concrete floors, new pavers, new construction, retaining walls and stucco.• Clean concrete tools and equipment with mild concrete build up.• 100% Biodegradable / Non-Regulated by D.O.T.• Meets USDA authorization code A1-A4, A7, A8, C1, G6, G7.• Non-Fuming / Non-Skin Irritant / Non-Corrosive.

Synpro Concrete Cleaner and Degreaser is a safe and effective cleaner formulated to replace not so safe acid and solventbased cleaners in a number of industries.• Dilution and Application: We recommend a maximum 10:1 (parts water: Synpro Cleaner) for light or general cleaning, 4:1 for moderate cleaning and 1:1 for heavy cleaning and degreasing.• Commonly used to clean concrete in preparation to receive acid or water based stains. It is also used to achieve general cleaning of bricks, pavers, stucco and EIFS.• Reduces labor cost and increases life of equipment.• 100% Biodegradable / Non-Regulated by D.O.T.• Meets USDA authorization code A1-A4, A7, A8, C1, G6, G7.• Non-Fuming / Non-Skin Irritant / Non-Corrosive.

Concrete Cleaner/DegreaserMasonry Cleaner

#6110R - 10” BrushExcellent for larger areas whether applying from a 5 gallon bucket or a sprayer. 2½” Flagged trim.

#6104R - 4” Round wheel faux finish brush.#6118R - 18” BrushExcellent as an applicator or finishing brush. 2½” Flagged fiber.

Also available:#6108R - 8” BrushGreat for smaller jobs under tight conditions. 2½” Flagged trim.#6109R - 9” Wide Body BrushHolds the most liquid of any of the brushes making it ideal when trying to saturate an area. The 9” brush will fit in liter buckets which are narrower than standard 5 gallon buckets. This brush actually contains the same amount of material as the 10” brush.2½” Flagged trim.#6124R - 24” BrushExcellent as an applicator or finishing brush. 2½” Flagged fiber.

Block Brushes

Faux Finish Brush

#7106R - 6” Waterproofing applicator brush.

DECORATIVE CONCRETE BRUSHES

Waterproofing Applicator Brush

Whisk Style Applicator Brush#7102R - 2-row, whisk style, applicator brush. Used to apply stains, seals, etc., along the edges, corners or tough to reach places.


MARKING & MEASURING


G130• 130 feet, heavy-duty cord and pull ring.• Holds over a pound of chalk for fewer refills.• One-piece steel crank for long life.

G100• 100 feet, heavy-duty cord and pull ring.• Hooks easily onto tool belt and holds almost a pound of chalk.• One-piece steel crank for long life.

MODEL UPC (052837) HOUSING HANDLE CAPACITY G100 026432 ABS metal 15 oz. G130 005864 ABS metal 27 oz.

MODEL UPC (052837) UNITS DIA. CIRC. RR318N 008506 ft., in. 12-1/2 in. 3 ft. RR418 010196 ft., in. 15-1/2 in. 4 ft.

MODEL UPC (052837) HOUSING HANDLE CAPACITY GB1 005802 plastic plastic 3oz.

MODEL UPC (052837) LGTH UNITS ZERO PT. NR101764 002211 165 ft. ft, 1/10, 1/100 Tape End + 1 ft.

MODEL UPC (052837) LGTH UNITS PG1825WIDE 027538 25 ft. ft, in, 1/8, 1/16, 1/32

GIant® chalk lIne reels The GIANT® brand is big — so it can hold a lot of string and a lot of chalk. If you’re snapping dozens of lines, or need big bold lines, grab a GIANT® and make your mark. Huge Big Mouth™ opening to ease fill-up and no-leak stopper to keep it shut.

nr101765 Features• Tough, double nylon-coated steel blades.• Break-resistant under severe use in the field.• 3/8-Inch wide blade reduces wind drift and tape weight.• Metal-reinforced crank handle for durability.

tape measuresLONG TAPE – Nylon-Reinforced Steel Blade, Standard RewindProviding accurate measurements, they are used in the harshest conditions in which people measure, and they stand to the only test that matters: field performance.

Gb1• High-speed, 3X rewind will re-chalk your line quickly.• Sturdy case will take the abuse any jobsite can dish out.• Clutch lets you pull the string out without knuckle-busting on a whirly handle.• No-Spill grommet keeps refills clean and easy.

stanDarD chalk lIne reel It fits in your hand, tool belt, or tool bag. Thin lines wherever andwhenever you need them. Geared rewind is a time saver. Braidedline is stronger and requires fewer replacements. This chalk linereel comes with a thin multi-material (cotton and polyethylene) linefor pinpoint accuracy and increased strength.

SHORT TAPE – Automatic Lock, 1-3/16” Wide BladeThis blade stands out up to 10 feet.

pG1825wIDe Features• Slide lock.• Chrome-coated ABS case and components.• Nylon-coated steel blade.• Impact durable.

measurInG wheelsROADRUNNER® Large• Time-proven designs with over 20 years of improvement.• 5-Digit, easy-read, magnified counter (9,999 feet, or meters; 11 inches, 10ths or decimeters) subtract in reverse.• 3-Piece, pistol grip handle with quick-snap cam locks.

RR318NKesonite™ is a strong, dense metal/resin composite. It holds its shape better than metal and it’s stronger than a spoked or die cast wheel. The weight of the wheel makes it easier to use and more accurate on rough terrain.

RR318N (Compact)

Tools &Equipm

ent

MARKING CHALK

prochalk® – Five Levels of IntensityProChalk Standard for your basic chalk line needs that are easier to clean up or let wear away naturally.ProChalk High Visibility which include our Glo-Orange, Glo-Lime and Yellow formulations for highly visible applications that will wear or wash away naturally in a few days.ProChalk Semi-Permanent for weather- and water-resistant lines that hit and stick for a long time but will eventually wear away naturally.ProChalk Permanent for weatherproof and waterproof lines that aren’t going to go away any time soon. Most users are choosing this level of intensity for applications that are going to be covered. This level is engineered for more extreme conditions.ProChalk Ultimate Dye which is almost 100% pigment for lines that are intended will be laid down once. Period.

186

prochalk® stanDarDInterior or Exterior UseApplications include interior layout, roofing, siding and paneling. MODEL UPC (052837) COLOR WEIGHT 4B* 006021 blue 4 oz. 4W* 006014 white 4 oz. 8B 006120 blue 8 oz. 8W 006113 white 8 oz. 12B 006226 blue 12 oz. 12W 006212 white 12 oz. 103B 020584 blue 3 lbs. 105B 006328 blue 5 lbs. 105W 006311 white 5 lbs. 125B 006526 blue 25 lbs. 125W 006519 white 25 lbs. 148B 006625 blue 48 lbs. 148W 006618 white 48 lbs.

*While supplies last

prochalk® semI-permanentWaterproof Marking ChalkExterior applications include concrete layout, roofing and metal fabrication. MODEL UPC (052837) COLOR WEIGHT 4R 006007 red 4 oz. 8BLACK 025954 black 8 oz. 8R 006106 red 8 oz. 12R 006205 red 12 oz. 103BLACK 026203 black 3 lbs. 103R 020577 red 3 lbs. 105BLACK 026210 black 5 lbs. 105R 006304 red 5 lbs. 125R 006502 red 25 lbs. 148R 006601 red 48 lbs.

prochalk® hIGh VIsIbIlItyStrike Once, Strike Bold!Exterior applications include corrections, plumbing, electrical, roofing and masonry. MODEL UPC (052837) COLOR WEIGHT 8GL 006427 glo-lime 8 oz. 8GO 006403 glo-orange 8 oz. 8Y 006137 yellow 8 oz. 12Y 006236 yellow 12 oz. 103GO 020591 glo-orange 3 lbs. 105GL 020188 glo-lime 5 lbs. 105GO 006410 glo-orange 5 lbs. 105Y 006335 yellow 5 lbs. 125GO 006540 glo-orange 25 lbs. 125Y 006533 yellow 25 lbs. 148GO 006649 glo-orange 48 lbs. 148Y 006632 yellow 48 lbs.

prochalk® permanentWeatherproof Marking ChalkExterior applications include exterior layout, extreme conditions, concrete layout and long-term applications. MODEL UPC (052837) COLOR WEIGHT PM8BLACK 021482 black 8 oz. PM8BLUE 021505 blue 8 oz. PM8RED 021529 red 8 oz. PM103BLACK 021499 black 3 lbs. PM103BLUE 021512 blue 3 lbs. PM103RED 021536 red 3 lbs. PM105BLACK 025299 black 5 lbs. PM105BLUE 025688 blue 5 lbs. PM105RED 025695 red 5 lbs.

prochalk® ultImate DyeWaterproof Permanent Marking DyeExterior applications include concrete layout, exterior layout, extreme conditions and long-term applications. MODEL UPC (052837) COLOR WEIGHT 5BD 025916 blue 5 oz. 5RD 026838 red 5 oz. 103BD 026036 blue 3 lbs. 103RD 026856 red 3 lbs.

WARNING! These are concentrated marking products. Lines snapped with ProChalk Semi-Permanent, Permanent and Ultimate Dye grades may be visible as long as one year after striking. The colors also may bleed through light-colored paint.


LEVELS


TECH Digital Electronic Level Type 196-2Electronic measuring technology / Two digital displays / Audible inclination guide / IP 65 Dust and Waterproof / Removable shock-absorbing end caps with anti-slip wall grips

Features• Precise slope measurements as needed for ADA 4.8.2 handicap ramp compliance.• Fast and accurate readings.• Dual screens (Front & Top) allow easy viewing from any angle.• Electronic displays illuminate for easy viewing in low light conditions.• 5 Display modes (degrees in 1 or 2 decimal points, percent, feet & inches (rise/run) in decimal, feet & inches in fractions, and mm/m).• Instantly converts measurements to any scale. Rise & run to degrees, degrees to percent, etc.• Audible tones for sight free use.• Simple one button calibration.• 14” Model designed to fit between wall studs to check slope on waste pipes.• Uses 2 AA batteries.• Carrying case included. Specifications

Model # Description Weight 36524 24” Tech/electronic IP65 level with case 1.6 36548 48” Tech/electronic IP65 level with case 2.8

DIRECTIONAL BEEP• Guides you to your angle so you don’t have to see the level.• Beep rate increases as angle is approached.• Steady beep when angle achieved.• Changes tone when gone too far.• Perfect for shimming cabinets, leveling pool tables.ANGLE COPY• Hold button freezes angle to be copied.• Readout shows the frozen angle.• Directional Beep begins when copied angle is approached.• Arrows show direction to copied angle.ALTERNATE ZERO• Hold button freezes angle to be copied.• Alt 0 button change frozen angle to the new zero reference.• Directional beep engages if activated.• Eliminates math when adding or subtracting from an angle.• Use for bending pipe, setting rafters, relative angle changes.GLOWING HORIZONTAL VIAL• No batteries required.• Any light source charges the vial.

Model # Description92288 23-5/8” (in/ft) SmartTool Level92296 47-1/4” (in/ft) SmartTool Level

Dependable Accurate Measures All Angles

Tools &Equipm

ent

SPECIALTY CALCULATORS

Construction Master Pro

188

Advanced Construction-Math Calculator

Size: 5.7” x 3.0” x 0.65” (145mm x 76mm x 17mm).Weight: 4.6 oz. (130gm) – with case and pocket reference guide.Power: Two 1.5-volt (LR-44/A76) long-life batteries.For: Contractors, Estimators, Architects, Carpenters, Framers, Draftspersons, Engineers, Builders, Tradespersons.

Model 4065Construction Calculations• Work in and convert between

building dimensions, including metric.• Built-in right-angle solutions.• Areas, volumes, square-ups.• Complete stair layouts.• Roof, rafter and framing solutions.• Circle – arcs, circumference,

segments.• Drywall – siding and panels.• Stairs – riser height and solve

for stairwell opening.• Studs on-center.• Compound miter cuts.• Arched rake-walls.

ConcreteCalc ProAdvanced Yard, Feet-Inch-Fraction Concrete Construction-Math Calculator

Size: 5.7” x 3.0” x 0.65” (145mm x 76mm x 17mm).Weight: 4.15 oz. (117.7gm) – with case and pocket reference guide.Power: One 3-volt (CR-2016) long-life battery.For: Concrete, Masonry and Paving Professionals.

Model 4225Helps You• Easy-to-use – reduce waste.• Work in yards, feet-inch-fractions.• Calculate area, volume and

weight per volume.• Automatic square-ups / drops.• Rebar solutions for total linear

feet and weight per size.• Complete stair layouts – set riser

height and tread width.• Equal sided polygons.• Circular solutions – circumfer-

ence, arc, cone, column and more!

Scale Master ClassicDigital Plan Measure

Size: 6.7” x 1.6” x 0.6” (171mm x 41mm x 15mm).Weight: 1.9 oz. (54g) – with batteries.Power: Two 3-volt lithium (CR-2032) Batteries included.

Model 6020Features• Obtain fast, accurate linear, area and volume take-offs from blueprints, drawings and maps.• 72 Built-in scales – 6 custom scales and 2 built-in memories.• “Lock switch” holds a mode or scale in either

metric or imperial dimensions.• Dramatically cut take-off time.• Speed estimates.• Improve profit.• Reduce errors.• Improve crew productivity.

Measure Master ProFeet-Inch-Fraction and Metric Dimensional Calculator

Size: 5.6” x 3.0” x 0.6” (142.8mm x 76.2mm x 15.9mm).Weight: 4.5 oz. (127.5gm) – with case and pocket reference guide.Power: Two 1.5-volt (LR-44/A76) long-life batteries.For: Designers, Craftsmen, Tradespersons, Fabricators, Woodworkers and Technicians.

Model 4020Calculations• Work in and convert between

dimensions, including metric.• Linear, area and volume mea-

surements; square-up and perimeter.• Find weight and weight per volume.• Instant solutions for circle area,

circumference, arcs and more.• Board feet.• Cost per unit – solve unit cost

and pricing.• Ideal for faster, more accurate

material estimates.

For: Contractors, Estimators, Engineers, Landscapers, Pipeline Builders, Excavators, Concrete Contractors, Plumbers, HVAC Contractors, Fencing Specialists, Telecommunication and Cable System Contractors, Pavers, Electrical Contractors or anyone needing fast, accurate takeoffs from plans and blueprints.


PRESSURE WASHER

Cold Water Gasoline Direct Drive Pressure Washer


SpecificationsPSI ..................................................................... 4000GPM ..................................................................... 3.5Displacement/ Engine ................. 389cc Honda OHVNet Weight .....................................................125 lbs.Dimensions .......................42.5”L x 23.5”W x 24.5”H

Rotating nozzles increase your cleaning power and decrease your cleaning time. They offer 0° spray impact with 25° coverage. (6000-PSI, 212°F temperature rating)

Rotating NozzlesAW-7500-SERIES

Designed for easy mobility, the CA-4004-1MAH is fitted with our patented vibration isolation plate and is capable of cleaning dirt and grime off any surface.

Pump• Forged brass manifold• Thermal relief valve• In-line water strainerFrame• Patented vibration isolation plate• Aluminum frame and base plate with 1-1/4-inch tube handles• Flat-free tiresUnit Includes• 50-foot x 3/8-inch non-marking hose with

quick connects• Insulated trigger gun with safety lock-off

WHEELBARROWS

HD-55 cubic ft . capacity

• Steel trays, handles, legs, braces and rims.• 14 gauge tubular steel handles that won’t bend or break with comfort-

able and secure hand grips.• 18 gauge steel trays with a 1/4” steel rod flanged into the rim.• Tires available in flat free or pneumatic.• Durable powder coated finish.

• Ergonomically designed so 80% of the load is on the wheel, NOT your back. • The deep and narrow trays are designed to maximize stability during

transport and allow for an easy and controlled end pour.• Designed to clear 27” interior or exterior doorways, of homes, sheds,

barns, greenhouses and outbuildings.

The last wheelbarrow you will ever need.

Tools &Equipm

ent

1184

-1-1

6

POLISHER

190

1100 Watt, Electronic Wet Polisher PWE 11-100

• Polisher for wet processing of granite, marble and other high-quality types of rock.• Metabo LongLife motor with epoxy coated windings, thermal overload protection and winding protection grid maxi-

mizes service life.• Vario-Tacho Constamatic electronics package (VTC) includes:

thumb-wheel for preselection of speed, speed remains constant under load, electronic soft start, thermal overload protection, current interruption protection.

• Double labyrinth sealed bearings for maximized dust protection.• Ergonomic shaped and adjustable loop handle for ideal handling.• Adjustable, external water supply for exact metering.• Housing cap for protection from splashes.• GFCI safety switch integrated in the cord.• Auto-stop carbon brushes to protect the motor.

Technical Values For backing pad up to maximum 5” Rated Input Power 1100 W Output Power 630 W No-Load Speed 1700 - 5400 /min. Revolutions at Rated Load 5400 /min. Torque 34 in.-lbs. Spindle Thread 5/8” - 11 UNC Weight (without power cable) 4.9 lbs. Cable Length 13 ft.

Wet Polisher


DECORATIVE CONCRETE TOOLS


Comes with aThreaded Handle

Adapter

“Magic Trowel” – Used to smooth the surface of applied cementitious overlays, particularly overlays of a more fluid consistency. A very effective finishing tool capable of creating a flawless surface.

Spiked Rollers – Vital in ensuing proper floor coating material adhesion. They are designed to be used on freshly applied floor coatings for the purpose of releasing trapped gas as well as to assist in the leveling process of floor coatings.

Item No. Width 47415 12” 47416 18” 47417 22” 47418 24” 47419 26”

Item No. 59458

9” Spiked Roller with 9/16” Super Sharp (44 spikes) on Radial Roller Frame

CAM® Gauge Rake – A patented “goof-proof” tool which applies a range of materials at a precise, specified, and uniform depth. For use in applying decorative concrete “toppings,” self-leveling/high performance floor coating materials, and underlayments in the floor-covering markets.

1/32” 1/24” 1/16” 1/8” 3/16” 1/4” 5/16” 3/8” 1/2” 57078 57079 57081 57082 57083 57084 57085 57086 57088 Size A Size B Size 1 Size 2 Size 3 Size 4 Size 5 Size 6 Size 8

24” Frame with threaded handle adapterItem No. 57000

Rake FrameCAM® Sets – When one contact point wears down, you simply loosen the wing nut and rotate the CAM® to a fresh contact point. The “radial” edge design maintains uniform coating thickness, even at varying handle angles and lengths.

CAM® Gauge Rake Frames and CAM® Sets are sold separately

FLOOR FINISHING

Nylfoam® Smoother #6030Designed for stairs and risers, closets, smaller areas, edging and cutting in, it applies a perfect finish every time. Can be cut to size.

Padco Floor CoatersThe fastest, most efficient floor finish applicators available, with normal coverage of 10,000 square feet per hour on hardwood, concrete, stone, tile and vinyl floors. They apply a wide range of waterborne and solvent based finishes with professional, even, consistent coverage every time –smooth, streak and bubble-free with amaz-ing speed.

18” COATERS 12” SMOOTHER

Heavyweight #6018Lightweight #6118

Nylfoam® #6000Applies a precise, smooth, lint-free finish to wood, resilient, concrete, tile and slate.

NanoFlock® #6100Applies an ultra-thin, smooth and shed-free finish. NanoFlock® is perfect for the application of acrylics, UV coatings and other thin mil applications.

18” REFILLS

Tools &Equipm

ent

MIXER DRILLS

Xo power mixer drills

192

For professionals with a profileEasy to operate with a straight back and ergonomically shaped grip handles. State-of-the-art motor and gear unit components for long service and safety while working. With HEXAFIX®-coupling for changing the mixing paddle quickly without any tools.

■ Mixing - premium class.■ Optimum performance and reliability.■ Perfect ergonomics.■ Reduced noise.■ Adjusted working height.■ Electronic speed control.

Dual paddle mixer Xo 55 duoHeavy work – made lighterThe counter-rotating hand-held mixer makes lots of mixing jobs easier and quicker. There is no counter-torque on the user and the machine is easy to move even in heavy and viscous material. You can generally count on being finished in just half the time. That’s modern mixing!

■ Quick, easy and thorough.■ Fast and thorough.■ Universal and economical.■ Upright working position.■ HEXAFIX® quick-action coupling.■ Electronic speed control.

Xo 1 Xo 4 Xo 6 Power rating 1010 W 1300 W 1600 W Power supply 110 - 125 VAC 110 - 125 VAC 110 - 125 VAC Gears 1 2 2 Speed / Load 0 - 650 rpm 0 - 450 rpm 0 - 410 rpm 0 - 620 rpm 0 - 580 rpm Diameter stirrer / rod 4.7” 5.5” 6.3” Mixing volume up to 10.5 gal. up to 17 gal. up to 23.5 gal. Double action trigger Yes Yes YesXo 1 & Xo 4 come with mixing tool paddle WK for cement, plaster, ready-mixed mortar, etc.Xo 6 comes with mixing tool paddle MK for plaster, mortar, screed, concrete, quartz-filled epoxy-resins, etc.

Xo 1 Xo 4

Xo 6

Xo 55 Duo Power supply 110 V, cable lenght 13 ft. Power rating 1450 W Rotation speed / Load 0-430 rpm Mixing volume up to 25 gals. (95 l) Weight 17.5 lbs.Comes with mixing tool MKD 140 HF

Technical specifications

Technical specifications

Ideal for:Miscellaneous mortars, Slightly moist mixes, Plasters, Screed, Coverings, Fillers, Filled and unfilled epoxy resin, Cement, Bitumen mixes, etc.

MKD 140 HF

Xo 55 Duo


WATER HOSE

Hot Water Rubber Hose


For use with hot water in cleaning applications oron jobsites. Designed for maximum performance up to 160°F and 100 PSI operating pressure. → Brass coupling is long lasting and crush proof.→ Heavy-duty rubber material is durable and long lasting.→ Manufactured in the USA. Part Number Hose Length Diameter4009100A 100 ft. 3/4”4008900A 50 ft. 3/4”4008600A 50 ft. 5/8”

Pro-flow Heavy-duty Professional HoseHeavy-duty professional hose is built to last and provide years of service. High burst rating for use in many applications. Hose end attachment features heavy-duty brass coupling with spring to prevent kinking at the spigot. Up to 450 PSI burst pressure rating. → Brass coupling is long lasting and crush proof.→ Heavy-duty PVC material, featuring “continuous flow” design on inner tube.→ Anti-bacterial lining prevents deterioration and extends hose life. Part Number Hose Length Diameter4004100 100 ft. 3/4”4003800 100 ft. 5/8”4003700 75 ft. 5/8”4003900 50 ft. 3/4”4003600 50 ft. 5/8”

Rubber Commercial Duty HoseFeaturing EDPM, a special synthetic rubber blend that is optimized for water appli-cations. Maximum operating temperature and pressure of 140°F at 100 PSI make this hose a strong choice for contractors, landscapers and other commercial profes-sional end-users. → Brass coupling is long lasting and crush proof.→ Heavy-duty rubber material is durable and long lasting.→ Manufactured in the USA.

Part Number Hose Length Diameter4008500A 100 ft. 5/8”4008300A 50 ft. 5/8”

Site Safe High Visibility HoseThis hose is excellent for use on jobsites, landscaping projects or wherever high visibility is needed. A great performing hose with features expected by either homeowners or commercial end-users. → Brass coupling is long lasting and crush proof.→ Medium-duty PVC material with high visibility colorant.→ Poly sleeve protects hose from kinking at the spigot. Part Number Hose Length Diameter4008200A 100 ft. 5/8”4008100A 50 ft. 5/8”

Tools &Equipm

ent

SLEDGES, HAMMERS & PICK MATTOCKS

Sledge Hammer, 36-in. Hickory Handle

194

The double face sledge hammer features a hickory handle for maximum strength and shock resistance. The head is forged from high-carbon steel and tempered for long life.

Part Number Head Weight 1197400 6 lbs. 1197900 8 lbs. 1199100 10 lbs. 1199400 12 lbs. 1199700 16 lbs. 1199900 20 lbs.

Engineer Hammers, 16-in. Hickory Handle

The hammer features a hickory handle and a double face forged steel hammer head. It makes driving spikes or wedges easier – a great choice for personal or professional use.

Part Number Head Weight 1196200 2 lbs. 1196300 3 lbs. 1196900 4 lbs. 1197500 6 lbs. 1198900 8 lbs.

Engineer Hammers, 16-in. Fiberglass Handle

The hammer features a fiberglass handle and a double face forged steel hammer head perfect for heavy hammering or demo-lition work. It makes driving spikes or wedges easier. It is a great choice for personal or professional use.

Part Number Head Weight 1196800 3 lbs. 1197000 4 lbs.

Sledge Hammer, Fiberglass Handle

The double face forged steel sledge hammer features a strong, fiberglass handle that will last for years to come. The hammer is used for demolition/destruction work.

Part Number Head Weight Handle Length 1197600 6 lbs. 34” 1198800 8 lbs. 36” 1199300 10 lbs. 36” 1199600 12 lbs. 36” 1199800 16 lbs. 36”

The pick mattock features a hickory handle and forged steel head, perfect for digging or breaking up compact ground. It has a handle guard for overstrike protection and to prevent the shaft from coming loose or slipping while striking.

Part Number Head Weight 1195000 5 lbs.

Pick Mattock, 36-in. Hickory Handle and Guard


BOLT CUTTERS,REBAR CUTTER/BENDER


Safety Cutting Model Size Handle Capacity Replacement No. HRC 19 HRC 36 Blade BC-0730 12” Malleable Cast Iron 3/16” 7/16” BCE-0030 BC-0735 14” Steel Tubular 1/4” 5/32” BCE-0035 BC-0745 18” Steel Tubular 5/16” 1/4” BCE-0045 BC-0760 24” Steel Tubular 3/8” 5/16” BCE-0060 BC-0775 30” Steel Tubular 1/2” 11/32” BCE-0075 BC-0790 36” Steel Tubular 9/16” 3/8” BCE-0090 BC-0710 42” Steel Tubular 5/8” 15/32” BCE-0010

Bolt Cutter• Most popular for all purpose cuts from soft to hard materials. • The blades are made of special alloy steel with careful heat treatment

to maximize the steel character in order to provide both durability and sharp-cutting.

• Clipper Cut jaw on 12” allows you flush cuts close to workpiece.• Center Cut jaw on 14” - 42” prolong the life span of the blade.• Lighter weight, great strength in steel tubular handles on 14” to 42” bolt

cutters.

Model No. SCB-16 Cutting Capacity up to 5/8”, #5 Grade 60 (420 Mpa) Bending Capacity up to 5/8”, #5 Grade 60 (420 Mpa) Bending Degree Capability 0 to 180 degree Bending Diameter 2-1/2” Net Weight 38 lbs. Overall Dimensions 8”(H) - 6”(W) - 50”(L) Replacement Blade No. SCBE-16 Replacement Blade Components #3, #4, #28

Re-Bar Cutter w/Bender• Cuts Grade 60 with ease!• Light weight and easy to handle.• Suitable for cutting and bending #4, #5 rebar.• Portable compact design with well balanced positioning of blades and rollers for suitability at jobsite work.• Can be bolted to floor or board for easy one-hand operation.

SCB-16

PRY BAR /STRIPPING BAR

Spec-Bar – Pry Bar / Form Stripping Bar

• All-purpose demolition and construction bar – excellent for stripping forms and other embedded objects.• Made with a heat treated high carbon tip and a rubber grip handle.• The hollow steel handle keeps the weight down while the rectangular (2” x 1”) shape helps the user keep a good grip.• The curved 3” spring steel head creates better leverage when taking apart panels.• The steel head is tempered to prevent deformation during heavy prying.• Efficient blade angle provides high leverage as a crow bar and nail puller.• All steel construction ensures long life.

Tools &Equipm

ent

196

rentals

Many products available are not shown in this catalog. Call SPEC-WEST first.


Concrete FormingSingle Waler Forming:• Gates Camlock System - Camlock Brackets - Stiffback Cams - Scaffold Brackets - Safety Rail Posts• Turnbuckles / Form Aligner Braces• Scaffold Planks• Jahn “A” Brackets• Form Liner Clamps• Snaptie Wedges

Conventional Forming:• RJD Fiberglass Rod System• 2 x 4 Waler Brackets• Snaptie Wedges• Pencil Rod Clamps• She-Bolts • Cathead Nuts• Taper Ties• Key Plates

Miscellaneous Forming:• Gates Lok-Fast Column Clamps• Gates Drill Stand• Scissor Column Clamps• MFG Fiberglass Column Forms• Fastset Form Hangers / School Brackets• Ellis Shore Clamps / Jacks• Steel Stakes

Gang Forming:• Gates 5M Anchor Lock System• Gates 9M Anchor Lock System

ConcreteRestoration& Surface Preparation• Floor Scrubber• Pneumatic Epoxy Guns• Shot Blasters• Mi-T-M Power Washers• Concrete Floor Grinder/

Polisher

Tilt-Up• Tilt-Up Lifting Hardware• Tilt-Up Braces• Coil Bolts / Cut Washers• Strongback Bolts / Plate Washers• Tilt-Up Angle Clips• Insert Replacement Plates

Tools & Equipment• Soff-Cut Saws• 36” and 48” Power Trowels• Wyco Concrete Vibrators• Power Washer

Decorative Concrete• Stamps • Skins• Pounder• Floor Scrubber

Fast Form:• Fast Form Brackets• Steel Wall• Road Form

MANUFACTURERS REPRESENTED


ABT, Inc . – Polydrain – Trench Former . . . . . . . . . . . . . . . . . . . . 16-17Access Products, Inc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5Adhesive Technology Corp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79, 81American Safety Tread Co ., Inc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .130Anvil American . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20Aquaphalt™ (High-Tech Asphalt Solutions) . . . . . . . . . . . . . . . . .90ARDEX Americas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70-71Armor Tile (Engineered Plastics) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4Benner Nawman . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .160Brickform (Solomon Colors, Inc .) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100, 102-103, 105, 107-108, 112, 117Buddy Rhodes Concrete Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .126Calculated Industries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .188CEP (Construction Electrical Products) . . . . . . . . . . . . . . . . . . . . . .145Chapin Manufacturing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67Collomix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .192Concrete Countertop Solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .125Concrete Solutions by Rhino Linings . . . . . . . . . . . . . . . . . . . . . . . . . . . .90Dayton Superior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39, 44-46, 92-93Deslauriers, Inc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68, 145Dustless Technologies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .163Edge Eyewear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .143ElastoCrete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .122Endurable Concrete Products (HDIP, Inc .) . . . . . . . . . 111, 121FallTech . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .142Franmar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89Gates & Sons, Inc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30-32Greenstreak . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41Grip Rite® (Prime Source Building Products) . . . . . . . . . 48, 66GST International . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74-75Hanes Geo Components (a Division of Leggett Platt) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-8Hay Stuff It, LLC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10Hogan Company . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42Husqvarna Construction Products . . . . . . . . . . . . . . . . . . . . . . . 153-157Igloo Products Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .146Kemiko® (Epmar Corporation - a Subsidiary of Quaker Chemical Company) . . 118, 123Keson . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185-186Kraft Tool Co .® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168-175Loveday Lumber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .94Lyons Manufacturing, Inc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72-73Magnolia Brush . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182-183Marshalltown Company . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176-179MCC U .S .A ., Inc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .195Merlex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .133Metabo Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .190MFG Construction Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34Mi-T-M Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .189Multicoat Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .134Multiquip, Inc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148-151, 159, 179NDS (National Diversified Sales) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18-19Newborn Brothers Co ., Inc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .138NewLook International, Inc . . . . . . . . . . . . . . . . . . . . .109-110, 113-116Orange-Crete® Brushes (Riviera Brush Co .) . . . . . . . . . . . . . . . .184Padco, Inc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .191Pavestone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .127

Pearl Abrasive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87-88Prime Source Building Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55-62Proline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101, 104PSI (Pollution Solution, Inc .) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9Quikrete® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76Rack-Strap, Inc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .146RJD Industries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36Roadware, Inc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77-78Robert Bosch Tool Corporation . . . . . . . . . . . .161-162, 164-166Roseburrough Tool, Mfg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180-181Seymour Midwest LLC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .191Seymour of Sycamore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22Simpson Strong-Tie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82Slip Industries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .167SmartTool® (M-D Building Products) . . . . . . . . . . . . . . . . . . . . . . . . . . . .187Smith Paints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106, 119-120Sonoco Products Company . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33Spec-West . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33, 37-39, 47, 65, 67, 83-86, 96-99, 139-140, 144, 195-196Stabila, Inc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .187Stegmeier, LLC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24-26, 35Stetson Development, Inc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27Surface Shields . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .128Synpro® Products (Riviera Brush Co .) . . . . . . . . . . . . . . . . . . . . . . . . .184Tectura Designs (a Wausau Tile, Inc . brand) . . . . . . . . . . . . . . . . . .6The AMES Companies, Inc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193-194Topcon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21TRM Manufacturing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65Trus Joist™ (Weyerhaeuser) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40VaporStake, LLC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42Vinylex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135-137W . R . Meadows, Inc . . . . . . . . . . . . . . . . . . . . .28, 50-54, 63-64, 80, 132Wacker Neuson . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .152Wellmade Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .189Westcoat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .124Wyco Tool® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .158Zurn Industries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-15


AAbrasive Stair Treads ....................130Abrasive Wheels ...............................88Accelerator, Set ................................52Acetone Sprayer ...............................67Acid Stain ........................................117Acid/Stain Neutralizer ......................99Acrylic Adhesive ............................133Acrylic Sealer ....................................98Acrylic/Urethane Sealer .................110ADA Pavers .........................................6Adapter, Handle ..............................178Adhesive, Acrylic .............................133 Anchoring ...................................81-82 Epoxy .........................................79-80 Substrate .......................................119 Water-Based .................................132Aggregate Confinement .....................8Aligner Brace, Form ..........................37Anchor Bolts .........................47, 55, 66Anchoring Adhesive ........................81Anchors, Adhesive/Mechanical .........82 Purlin ...............................................59 Stair Treads ...................................130 Wet Post ..........................................60Angle Grinder .................................162Antique Release .............................104Antiquing Agent .....................102, 104Applicator Brush ............................184Applicator, Floor Finish ...................191Architectural Concrete ...................126Area/Length Equivalents ...............139Artisan Concrete ............................126Asphalt Cutter .................................153Asphalt Patch ..............................74-75Asphalt Repair ..................................90Athletic Field Marker ........................76

BBar Ties .............................................48Bar, Pry ............................................195Bearing Plates ..................................55Bender/Cutter, Rebar ..............160, 195Beverage Cooler .............................146Bits, Hammer ...................................164Blade Roller ......................................87Blades, Diamond ..........................83-84 Soff-Cut Saw .................................157 Trowel ....................................148-149Block Brush ....................................184Board, Form .......................................40Body Harness .................................142Bolt Cutter .......................................195Bolts, Anchor ...............................55, 66 Hex Head ........................................20Bonding Agent ....................53, 72, 133Boots ...............................................144Brace, Wall ........................................93Bracing Information .........................93Bracket, Cooler/Cup ........................146 Corner Lock .....................................37 Float ......................................169, 178 Tilt ...................................................93Breaker Hammer .............................161

Brick Texture Mats .........................100Bronze Groover ..............................172Brooms ............................................182Brown Jersey Gloves .....................144Brushes ....................................182-184Buckle Overboots ...........................144Bull Float .................................170, 181Bump Cutter ....................................179

CCalculator ........................................188Cam Lock Bracket ............................30CAM® Sets .......................................191Cantilever Forms .........................24-25Cargo Straps ...................................146Carpet Protection ...........................128Cast-In-Place Concrete ...............50-68Catch Basin ..................................14-17Catheads ...........................................38Caulk, Joint ........................................28Caulking Gun ..................................138Center Line Groover .......................171Chairs, Rebar ...............................45-46Chalk ................................................186Chalk Line Reels .............................185Chamfer Cutter .................................94Chamfer Strips ..................................94Channel Drain ........................18-19, 26Channel Grate ..............................18-19Chisels .............................................174Civil Engineering ...........................4-22Clamps, Liner ....................................37 Stringline .........................................20Cleaner, Concrete ............................108 Concrete/Masonry ...................99, 109Cleaner/Degreaser ..........................184Cleaners & Strippers ................89, 111Coil-Anchor .......................................92Cold Patch .........................................90Cold Weather Curing Blanket..........48Color Chart, .......................................... Brickform (Acid Stain) ...................117 Brickform (Pro-Dye) ......................112 Brickform (Standard Colors) .........103 Endurable Concrete (Stain) ..........121 Kemiko® (Stone Tone™) ...............118 NewLook (Faux Fusion™) ............116 NewLook (Solid Color Stain) .........114 Proline (Dura Colors) ....................104 Smith Paints (Overlay) ..................106 Smith Paints (Stain) ......................120 Solomon (Dry Pigment) .................105Color Enhancer ...............................113Color Hardener .......................102, 104Color, Dry Pigment ..........................105Column Bases .............................61-62Column Clamps ................................38Column Forms .............................32-34Common Nails ..................................66Compactor, Plate ............................151Concrete Calculator .......................188Concrete Cleaner ..............................99Concrete Cleaner/Degreaser .........184Concrete Coating ...........................123

Concrete Coloring ..........................102Concrete Countertop ..............125-126Concrete Curing & Sealing ..............50Concrete Demolition ........................81Concrete Doweling System .............41Concrete Finishing Brush .............183Concrete Flooring ..........................122Concrete Form Board ......................40Concrete Forming .......................30-42Concrete Forming (Rentals) ..........196Concrete Hardener ...........................51Concrete Mix .....................................76Concrete Placer ..............................178Concrete Polishing .........................108Concrete Repair ...........................70-90Concrete Restoration (Rentals) .....196Concrete Sealer ........... 96-98, 110-111Concrete Sprayer .............................67Concrete Stain .........................112-121Concrete Stamps .....................100-101Concrete Tamper ............................180Concrete Test Molds ........................68Concrete Topping .............................70Concrete Vibrator ...................152, 158Cone Cups ......................................146Cone Ties, Cam Lock ........................30Connectors, Electrical .....................145Construction Calculator ................188Construction Laser ..........................21Construction Stakes ........................42Control Joint Groover ....................174Conversion Factors ..........................62Converter Bracket, Hand Tool .......172Cooler ..............................................146Corner Lock Bracket ........................37Corrosion Resistant Coating .........123Cotton Gloves .................................144Counter Duster ...............................182Counter Edge Profiles ....................125Countertop Forms ............................35Countertop Mix .................................76Countertop, Concrete ......122, 125-126Coverage Chart ........................139-140Cracking Agent .................................81Crow Bar .........................................195Cup Wheels ..................................85-86Cups, Disposable .............................146Cure & Seal .....................................112Curing Aid .........................................51Curing Blanket ..................................48Curing Compound ......................50, 52Cut-Off Saw ..............................152-153Cut-Off Wheels .................................88Cutter, Chamfer .................................94Cutter/Bender, Rebar ..............160, 195

DDeactivator, Surface .......................107Decimal/Fraction Conversion .............. ................................................86, 129Deck Coating ..................................124Deck Drain .........................................26Deck Joint .........................................26Decorative Concrete .................96-128

PRODUCT INDEX(Abrasive Stair Treads — Eyewear)

Decorative Concrete (Rentals) ......196Decorative Concrete Brush ...........184Degreaser ..........................................89Degreaser/Cleaner ..........................184Demolition Hammer .......................161Demolition, Concrete ........................81Densifier, Surface ............................108Detectable Warning .........................4-6Diamond Blades ..........................83-84Diamond Cup Wheels .................85-86Diamond Pads ................................125Digital Level ....................................187Digital Plan Measure ......................188Dimensional Calculator .................188Dispenser, Cup ...............................146Dissolver, Concrete/Mortar .............109Double Roller Tamper ....................180Doweling System, Concrete .............41Dowels, Smooth ................................42Drain Fittings ....................................26Drain Grate .............................14, 16-19Drain Inlet Filter ..................................9Drain Spade ....................................175Drain, Channel ...................................26 Deck ................................................26 Trench ........................................11-19Dressing, Concrete ...........................71Drill Bit, Dust Extraction ..................166Drill Stand, Vertical ...........................30Driveway Pavers .............................127Dry Pigment Color ..........................105Duplex Nails ......................................66Duplex Screw ....................................65Dust Collection, Grinder .................162Dust Containment ..........................128Dust Control ......................................87Dust Extraction Drill Bit .................166Dust Shroud ....................................163Duster ..............................................182Dustproofing ...................................132

EEar Plugs .........................................144Early Warning Pavers ........................6Edgeliners .......................................101Edger, Hand .............................173, 178 Walking .........................................180Efflorescence Remover ...........99, 110Electrical Plugs/Connectors ..........145Electronic Level ..............................187Engineer Hammer ...........................194Epoxy Adhesive ...........................79-80Epoxy Coating ................................124Epoxy Primer/Finish .......................123Equipment (Rentals) ......................196Erosion Control ............................7, 10Etching Gel .....................................109Evaporation Retardant .....................52Expansion Anchors ..........................92Expansion Joint Cap ........................54Expansion Joint Filler ......................28Extension Cord ...............................145Extension Handles .........................169Eyewear ...........................................143


FFall Arrest ........................................142Faucet Knockouts ..........................125Faux Finish Brush ..........................184Fender Wash Brush .......................183Ferrule Loop Inserts .........................38Fiberglass Column Forms ...............34Fiberglass Form Ties .......................36Fiber-Optic Capstone .......................25Filler, Joint .........................................54Film, Polyethylene .............................65Finish Underlayment ........................70Finishing Aid ...................................108Finishing Brush ..............................183Finishing Trowel .............................176Fittings, Drain ....................................26Flat Bar, Fiberglass ...........................20Float Bracket ...........................169, 178Float Pans ................................148-149Float, Bull .................................170, 181 Hand ......................................168, 177Floodlight ........................................145Floor Brush .....................................182Floor Finish Applicator ..................191Floor Protection ..............................128Floor Scraper ..................................175Flooring, Concrete ..........................122Follow Plate, Caulking Gun ............138Form Aligner Brace ..........................37Form Board .......................................40Form Hanger, School Bracket ...........39Form Patch, Metal .............................37Form Release ....................................53Form Scraper ..................................175Form Stripping Bar .........................195Form Ties ....................................36, 55Forming (Rentals) ...........................196Forming Accessories ..................37-38Forms, Cantilever .........................24-25 Column .......................................32-34 Concrete ..........................................30 Countertop ..............................35, 125Foundation Straps .......................57-58Fraction/Decimal Conversion .............. ................................................86, 129Fresno Float Weight .......................170Fresno Trowel .................................171Funnel, Slump Cone ..........................68

GGang Forming ...................................32Gauge Rake .............................174, 191Geogrids ..............................................8Geotextiles ..........................................7Glasses, Safety ...............................143Gloves ..............................................144Grate, Drain ............................14, 16-19Gravel Bags ........................................9Gravel, All-Purpose ............................76Grinder .............................................162Grinder Caddy ..................................87Grinding Wheels ...............................88Groover .............................172-173, 181Groover Bit, Bull Float ....................170

Fresno Trowel ...............................171Groover, Center Line .......................171 Control Joint ..................................174 Torpedo .........................................167Grout ..........................................63, 122Gunite Shoes ..................................174

HHammer ...........................................194Hammer Bits ............................164-165Hammer Steel .................................164Hand Edger .....................................178Hand Float ...............................168, 177Hand Groover .................................181Hand-Held Mixer .............................192Handle Adapter ...............................178Handle Adapter Plates ...................172Handles, Extension ..........................169Hard Hat ..........................................144Hardener ............................................51Harness, Full Body ..........................142Hearing Protection .........................144High Chairs .......................................46High Gloss Sealer ........................96-97Holdowns ..........................................56Hook, Screed .....................................65Hose, Water .....................................193Hydration .........................................144

IImpact Driver ..................................161Impalement Protection ...................145Individual High Chairs .....................46Industrial Coatings .........................123Inlet Filter ............................................9Inverted Tip Marking Paint ..............22

JJersey Gloves .................................144Joint Cap ...........................................54Joint Filler ...................................54, 81Joint Filler, Expansion ......................28Joint Sealant ...............................28, 54Jointer, “V” .......................................174

KKneeboard .......................................175

LLanyard, Shock Absorbing ..............142Laser ..................................................21Leather Gloves ...............................144LED Floodlight ................................145Length/Area Equivalents ...............139Level ................................................187Lids, Test Cylinder .............................68Lifeline, Self-Retracting ...................142Lift Insert ...........................................92Lifting and Bracing ...........................92Light Forming ...................................39Liner Clamp .......................................37Liquid Release ..................................99Load Support System ........................8Long Tape .......................................185Low Sheen Sealer ........................96-97Low VOC Sealer ................................96

MMarking Chalk .................................186

(Fall Arrest — Rock Face Form Liner)

Marking Chalk Reels ......................185Marking Paint ....................................22Mask, Respirator ..............................144Mason Mix .........................................76Masonry Cleaner ......................99, 184Masonry Nails ...................................66Mastic Remover ................................89Mastic Waterstop ............................137Mats, Texture ............................100-101Measuring Tapes/Wheels ..............185Mechanical Anchors ........................82Membrane, Waterproofing .......132, 134Mesh Supports .................................46Metal Cutter .....................................153Metals ..............................................130Mini Channel Drain ......................18-19Mixer, Hand-Held .............................192 Mud ...............................................175Mortar, Repair .........................63, 74-75Multipliers, Table of ........................166Multi-Purpose Film ...........................65Muriatic Acid Replacement .............89

NNail Puller ........................................195Nail Stakes ........................................42Nails .............................................47, 66Neutralizer, Acid/Stain .......................99Nose Cap ...........................................26Nozzle, Pressure Washer ................189Nut Washers .....................................38

OOSHA-Orange Brush ......................182Overboots, Buckle ...........................144Overhead/Vertical Wall Patch ..........71Overhead Repair, Concrete ..............72Overlay, Cementitious ..................74-75 Concrete ........................................106Overlayment, Decorative ................122

PPad, Screed .......................................65Paddle Mixer ...................................192Paint Brush .....................................182Paint Mixer ......................................175Paint Remover ................................109Paint Stripper ..................................111Paint, Marking ....................................22Painters Scratch Brush ..................182Paper Cups .....................................146Patch, Cementitious ......................74-75 Concrete ..........................................71Pathway Pavers ..............................127Patio Stones ....................................127Pavers ..............................................127Pavers, ADA ........................................6Pick Mattock ...................................194Placer, Concrete ..............................178Plan Measure ..................................188Plastic Slump Cone ..........................68Plastic Stakes ...................................42Plate Compactor .............................151Plugs, Electrical ...............................145 Plastic ..............................................37Polisher, Wet ...................................190

Polishing, Concrete .........................108Polyethylene Film .............................65Polyethylene Sprayer .......................67Pool Deck Pavers ...........................127Pool Drain Products .........................27Pool Products ...................................28Pool Trowel .....................................177Portland Cement ...............................76Post Anchors, Wet ............................60Post, Screed ......................................65Pouradrain™ .....................................27Pouralid™ ..........................................27Pour-in-Place Countertop ..............122Power Mixer ....................................192Power Trowel ..........................148, 150Pressure Washer ............................189Primer Adhesive .............................137Primer, Concrete ...............72, 119, 122Primer/Finish, Epoxy ......................123Pro Bar ............................................195Profiles, Counter Edge ....................125Protector, Sealer ...............................98Protector, Surface ...........................108Pump ................................................159Purlin Anchors ..................................59PVC Gloves .....................................144PVC Waterstops ......................135-136

RRack Straps .....................................146Radius Clips ......................................20Radius Layout Material ....................20Rain Suit ..........................................144Rake Frame, Gauge ........................191Rammer ...........................................151Random Stone Stamps ..................101Rebar ............................................47-48Rebar Caps .....................................145Rebar Chairs ................................45-46Rebar Cutter Bits ............................165Rebar Cutter/Bender ..............160, 195Rebar Positioning Assembly .........142Rebar Splicing ..................................44Rebar Standards ...............................43Reels, Chalk Line .............................185Reinforcements ...........................44-48Release Agent ............99, 102, 104,122Remover, Coatings ............................89 Mastic ..............................................89 Paint ..............................................109Rentals .............................................196Repair Mortar .........................63, 74-75 Repair, Asphalt ..................................90Repair, Concrete ....................71-79, 90Repellent .........................................119Repellent, Water ..............................133Respirator, Disposable ....................144Restoration, Concrete .......................90Resurfacing, Concrete ......................90Retaining Walls ...............................127Retardant, Evaporation .....................52Retractable Lifeline ........................142Ride-On Trowel ...............................150Rock Face Form Liner ...................125


Rock Salt Roller ..............................180Rocker Groover ..............................172Rods, Stringline .................................20Rolled-Rim Cups ............................146Roller Tamps ...................................173Roller, Spiked ..................................191Rotary Hammer ...............................161Rotary Hammer Bits ................164-165Rotating Mats ..................................101Round Bar, Fiberglass ......................20Round Column Forms .................33-34Rub Bricks ......................................168Rubber Hose ...................................193

SSafe Stair Guidelines .....................129Safety & Personal Protection .............. ...............................................142-146Safety Apparel ................................144Safety Eyewear ...............................143Safety Rail Post ................................30Safety Tested Scaffolds ...................31Safety Treads ..................................130Safety Vest ......................................144Salt Roller ........................................174Sand Bags ...........................................9Satin Sealer .......................................98Saw Blades ..........................83-84, 157Saw Vac .............................................87Saw, Cut-Off ..............................152-153 Skilsaw ..........................................162 Soff-Cut ..................................154-156 Worm Drive ...................................162Scaffold Bracket ..........................30-31Scaffolds, Safety Tested ...................31School Bracket, Form Hanger ..........39Scissor Clamps ................................38Scraper ............................................175Scratch Brush .................................182Screed ..............................................179Screed Hook .....................................65Screed Pad/Post ...............................65Screed, Magnesium .........................171Screw Anchor ...................................82Screw, Duplex ....................................65Scrub Brush ....................................182SDS-max® Hammer Bits .................164SDS-max® Hammer Steel ...............164SDS-plus® Hammer Bits .................165SDS-plus® Hammer Steel ...............164Seal, Vapor ........................................64Sealant Coverage Chart .................140Sealant, Joint ...............................28, 54Sealer ................................110, 122-123Sealer Protector ................................98Sealer Stripper ................................111Sealer, Concrete ...........96-98, 111, 118Sealing Compound ...........................50Sediment Filter ...................................9Self-Leveling Underlayment ............70Self-Retracting Device, Web ..........142Set Accelerator .................................52She-Bolts ...........................................38Shock Absorbing Lanyard .............142

(Rock Salt Roller — Worm Drive Saw)

Shop Vac .........................................163Shovel ..............................................175Silt Filter ..............................................9Sink Form ........................................125Skilsaw ............................................162Skimmer Cover .................................27Skins, Texture ..................................100Slate Texture Mats ..........................100Sledge Hammer ..............................194Sliders ..............................................175Slip Resistant Additive ....................99Slump Testing ...................................68Smooth Dowels ................................42Snaptie ...............................................37Snaptie Wedge ..................................37Soff-Cut Saw ............................154-156Soff-Cut Saw Blades ......................157Soil Retention .....................................7Space Bits .......................................165Spacer Wheels ..................................45Spec-Bar ..........................................195Specialty Calculator .......................188Speed Dowel® ....................................41Speed Load™ ...................................41Spigot, Cooler ..................................146Spiked Roller ..................................191Splicing, Rebar ..................................44Spray Paint ........................................22Sprayer ..............................................67Spreader Cleats ................................39Spreader, Concrete .........................168Stain, Concrete .........................112-121Stair Guidelines, Safe .....................129Stair Nosings ..................................130Stakes, Nail .......................................42Steel Slump Cone .............................68Steel Stakes ......................................42Steel, Hammer .................................164Step Liners ........................................35Step Tools, Concrete ......................173Stiffback ............................................30Stone Texture Mats ........................100Stones, Paving ................................127Straightedge ....................................167Straw Wattles ....................................10Street Broom ...................................182Stringline ...........................................20Stripe Paint .......................................22Stripper ............................................109Stripper ............................................111Stripping Bar ...................................195Structural Repair ..............................73Submersible Pump .........................159Sunglasses ......................................143SuperTie™ .........................................36Surface Deactivator ........................107Surface Preparation ...............109, 119Surface Preparation (Rentals) .......196Surface Protection .........................128Surface Retarder ..............................52Surface Treatment ............................52Swimming Pool Products ...........24-28SWPPP ............................................9-10

TTable of Multipliers .........................166Tactile Detectable Warning ............4-5Tamper .............................................101Tamper, Concrete ............................180Tape Measure .................................185Tape, Vapor Barrier ............................64Taper Ties .........................................38Test Cylinder, Slump ........................68Texture Mats/Skins ..................100-101Thermal & Moisture Protection ............ ...............................................132-140Threaded Splicing System ..............44Tie Hole Plugs ...................................38Tie-Downs .......................................146Ties, Bar .............................................48Tilt Bracket ........................................93Tilt Wall Patch ...................................71Tilt-Up (Rentals) ..............................196Title 24 Safety Strip (Stair Tread) ....... ......................................................130Tools & Equipment ..................148-195Tools (Rentals) ...............................196Topcoat, Decorative ........................123Topping, Concrete ..................70, 72-73Torpedo, Groover ............................167Touch-Up Wheels ...........................101Trash Pump .....................................159Trench Drain ................................11-19Trigger Sprayer .................................67Tripod ................................................21Trowel ..............................................191Trowel Blades ..........................148-149Trowel, Finishing .............................176 Fresno ...........................................171 Pool ...............................................177 Ride-On .........................................150 Walk-Behind ..........................148, 152Turnbuckle ........................................37

UUnderlayment, Concrete ...................72 Self-Leveling ...................................70Urethane Cement ............................124Urethane/Acrylic Sealer ...................98Utility Brush ....................................183Utility Stamps .................................174UV Resistant Coating .....................123

V“V” Jointer ......................................174Vacuum ............................................163Vacuum, Saw ....................................87Vaper Barrier .....................................64Varnish Stripper .............................111Vehicle Wash Brush .......................183Vertical Drill Stand ...........................30Vertical Stripper ..............................111Vest, Safety ......................................144Vibrator Motor, Concrete ................158Vibrator Shafts and Heads ............158Vibrator, Concrete ...........................152Void Forms, Round ...........................33

WWaler Rods ........................................38

Walk-Behind Trowel ...............148, 152Walking Edger ................................180Walking Groover .....................173, 181Wall Brace .........................................93Wall Cap Forms ................................35Wall Patch, Overhead/Vertical ..........71Wall Repair, Concrete .......................72Walls, Retaining ...............................127Water Cooler ...................................146Water Drainage ...................................7Water Hose ......................................193Water Paint Brush ..........................182Water Pump ....................................159Waterproof Coating .................123-124Waterproofing ..........................132-134Waterproofing Applicator Brush ...184Waterstops ...............................135-137Wattles, Straw ...................................10Wax, Concrete .................................118Web Self-Retracting Device ...........142Wedge Anchor ..................................82Wedge, Snaptie .................................37Wedges ..............................................55Welded Wire Fabric ..........................48Welded Wire Mesh ............................47Wet Look Sealer ..........................96-97Wet Polisher ....................................190Wet Post Anchors ............................60Wet/Dry Vacuum .............................163Wheelbarrow ...................................189Wheels, Abrasive ...............................88 Spacer .............................................45Wire Brush ......................................182Wire Mesh .........................................47Wire Mesh Supports .........................46Wire, Welded .....................................48Wood Texture Mats ........................100Worm Drive Saw .............................162

JOB START-UP CHECK LIST

Customer: Name:Phone:Email:Attn:Job Name: Location:

UNIT DESCRIPTION ORDER QTY. Filter/stabilization fabric Silt fencing / Straw wattles / SWPPP Barrier/safety fencing Marking paint (specify colors) Flagging Caution/danger tape Duct tape Nylon string line (twisted or braided, specify color) Marking chalk (specify color) Dolomark Lumber crayons Steel stakes (size 12”, 18”, 24”, 30”, 36”, 48”) Stake puller Shovels (square, round) Laser & Receiver Tripod (aluminum or fiberglass) Safety harness / Lanyards Rubber boots (5 buckle) Knee boots Rain gear (specify size) 5 gallon water cooler (with or w/o cups and cup holder) Hard hats (specify standard or ratchet, full rim) Safety vests Safety glasses Ear protection Gloves Respirator/dust masks First aid kits Water hose (specify size 1-1/2” x 50’, 3/4” x 50’, 3/4” x 100’) Water hose nozzle (Plastic adjustable) Hydrant wrench or adapter Nails (specify size) Chapin sprayer (1 gal. or 3 gal.) Wheelbarrow (metal) Electrical extension cords, twist lock, 50’ or 100’ Assorted pigtails Temporary power boxes / Cords Brooms / Brushes Floor scrapers (specify size 14”, 18”, 22”, 36”, tapered) Cumalongs / Concrete rakes 20” Gas cans Bolt cutters (specify size, import or domestic) Blades (skillsaw general purpose or carbide, metal, concrete, etc.) Bits (specify size, auger, paddle, SDS, spline shank, etc.)

Sacramento fax: (916) 361-1381 • Loomis fax: (916) 660-0142 • Chico fax: (530) [email protected]

Print Catalog - Spec-West

Documents

Transcript of Print Catalog - Spec-West