PETROLEUM TANKS - Containment Solutions
-
Upload
khangminh22 -
Category
Documents
-
view
0 -
download
0
Transcript of PETROLEUM TANKS - Containment Solutions
PETROLEUM TANKS L I S T P R I C E
E F F E C T I V E : J A N U A R Y 1 , 2 0 1 8 P U B L I C AT I O N N O . P G 1 1 0 0 0 X
S U P E R S E D E S P G 1 1 0 0 0 W01/18
TABLE OF CONTENTS:
Double-Wall Tanks .........................................................................................................................................3
Tank Mounted Accessories ..........................................................................................................................4
Miscellaneous Accessories ...........................................................................................................................5
Deadman Anchoring .....................................................................................................................................6
Compartment Tank Extensions ..................................................................................................................7
Tank Sumps .......................................................................................................................................................8
Tank Sump Accessories ..............................................................................................................................12
CONDITIONS OF SALEContainment Solutions, Inc. (CSI) fiberglass underground petroleum storage tanks are to be installed according to NFPA 30 or 31A and current installation instructions as outlined in Pub. No. INST 6001. Local codes may apply and should be consulted. Fiberglass tanks require proper selection of backfill materials and good construction practices during installation. Double-Wall Tanks are for the storage of petroleum products, alcohols, and alcohol-gasoline mixtures as defined in Pub. No. TNK 1001.
The proper handling, installation and care of all tanks are the responsibility of the purchaser and any loss or damage resulting from improper installation, handling or care, or from storage of a product not approved by CSI, shall not be the responsibility of CSI.
General terms and conditions of sale apply to these products and are stated in CSI Terms and Conditions as written on the order acknowledgment and invoice. All prices are stated in USD and subject to change without notice.
Payment Terms: Subject to approval.
WARRANTYProduct warranties are available on the CSI website or by calling your local sales representative. Product warranties are suspended until the CSI invoice is paid in full.CSI does not warrant any installed product, component or parts manufactured by others. All consumable parts including but not limited to gaskets and o-rings are excluded from all CSI warranties.
SHIPPING TERMS F.O.B. Manufacturing Plants:
• Bakersfield, California • Tulsa, Oklahoma • Mt. Union, Pennsylvania
All prices herein are F.O.B. shipping point. Freight invoiced to customer, sellers routing. Reference the most current Freight & Delivery Zone Rate Schedule. Fuel surcharges may be added to the invoice as necessary. All orders subject to minimum-order value. Taxes not included.
Containment Solutions, Inc.333 North Rivershire Dr., Suite 190
Conroe, Texas 77304Tel: (936) 756-7731 • Fax: (936) 756-7766
www.containmentsolutions.com
10’
8’
6’
4’
Note: [1] For 12’ diameter tank prices, call your CSI inside sales representative.
DOUBLE-WALL TANKS
40,000 $190,610 $14,995 (10) 71' 4" 19,300 27,750
35,000 $159,565 $12,465 (8) 63' 1" 17,000 24,350
30,000 $133,655 $9,715 (8) 54' 7" 14,500 20,400
25,000 $111,195 $8,125 (8) 46' 0" 12,250 17,100
20,000 $81,025 $6,535 (6) 37' 6" 9,750 13,550
15,000 $65,705 $5,200 (4) 29' 3" 7,700 10,500
12,000 $58,125 $3,645 (4) 23' 9" 6,550 8,600
10,000 $54,370 $3,365 (3) 20' 11" 5,850 7,500
6,000 $34,250 $2,735 (4) 30' 3" 4,050 5,100
5,000 $31,365 $2,550 (4) 25' 0" 3,450 4,350
4,000 $27,480 $2,400 (2) 19' 9" 2,900 3,550
3,000 $23,580 $2,245 (2) 16' 9" 2,450 3,000
2,500 $21,370 $2,160 (2) 13' 9" 2,150 2,650
1,000 $14,210 $1,145 (2) 11' 1" 950 1,235
600 $10,740 $1,105 (2) 7' 3" 750 975
15,000 $69,575 $4,325 (6) 44' 7" 7,500 9,350
12,000 $49,415 $3,730 (4) 36' 0" 5,550 7,050
10,000 $39,530 $3,415 (4) 30' 6" 4,800 5,950
8,000 $34,095 $3,040 (4) 25' 0" 4,050 5,000
6,000 $30,640 $2,780 (2) 19' 6" 3,300 4,050
5,000 $26,890 $2,555 (2) 16' 9" 2,950 3,600
3
NOMINAL CAPACITY (GALLONS)
[1]
MADE -TO-
ORDER PRICE
BRINE FILLED INTERSTICE
& RESERVOIR
NO. STRAPS REQUIRED
(not included in price)
TANK LENGTH / WEIGHT (FT. / LBS.)
NOMINAL LENGTH
NOMINAL WEIGHT
NOMINAL WEIGHT W/
BRINE
Manway Accessories (Fig. 3 - 4)
Carbon Steel Manway Cover (blind) (Fig. 3) $495 $1,080 $1,345
Bolts, Nuts, Washers & Gaskets $290 $385 $685
304 Stainless Steel Manway Cover (blind) (Fig. 3) $1,585 $2,165 ---
Bolts, Nuts & Washers for Stainless Steel Lid $325 $425 ---
EPDM or Teflon Gasket for Stainless Steel Lid $290 $340 ---
304 Stainless Steel Bolt Rings (Supplied in 2 Halves) (Fig. 4) $935 $1,275 ---
Manway Fittings - NPT Couplings (Fig. 5) 2" 4" 6" 8"
HALF Coupling - Carbon Steel --- $370 $710 $1,235
HALF Coupling - 304 Stainless Steel $360 $530 $1,410 $1,955
FULL Coupling - Carbon Steel $495 $525 $950 $1,635
FULL Coupling - 304 Stainless Steel $510 $840 $2,045 $2,855
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Notes: [1] Manway price includes a deflector plate, steel lid and hardware.[2] Manway extensions include nuts, bolts, washers and gasket.[3] Includes deflector plate.[4] Includes deflector plate (top center line only).[5] Will support 400 lbs.
Double NPT Couplings [3] (Fig. 7) Unit Price
4" HALF coupling fitting Carbon Steel $1,750
4" FULL coupling fitting Carbon Steel $2,445
Fiberglass Flanged and Plate Gusseted Nozzles [4][5] (Fig. 8)
2" nozzle $1,615
4" nozzle $2,065
6" nozzle $2,475
8" nozzle $3,460
10" nozzle $3,620
Manways & Extensions (Fig. 1 - 2) 22" 30" 36"
Double-Wall Tank Manway [1] (Fig. 1) $2,950 $5,745 $10,650
Manway Extensions [2] (Carbon Steel Hardware) (Fig. 2) $1,795 $4,680 $7,425
Manway Extensions - SS [2] (304 Stainless Steel Hardware) $1,870 $5,020 ---
Manway Extension additional length per foot $490 $1,440 $2,175
Tank Mounted Fittings [3] (Fig. 6) 4" 6" 8"
HALF coupling fitting Carbon Steel $965 $1,435 $2,410
HALF coupling fitting 304 Stainless Steel $1,430 $2,335 $4,355
HALF coupling fitting Fiberglass $1,085 $1,505 ---
4
TANK MOUNTED ACCESSORIES
Notes: [6] NOT UL approved - must be field installed.[7] Includes manway cover with suction and return lines.[8] Includes 24" x 24" square opening in top.[9] Does not include primary tank fitting.[10] Only available for 4' diameter tanks, includes 4" NPT coupling fitting and deflector plate.
Ladders (Fig. 9) 4' Tank 6' Tank 8' Tank 10' Tank 12' TankCarbon Steel $1,490 $1,555 $1,570 $1,680 $1,805 Aluminum $1,675 $1,975 $2,305 $2,885 $3,405 Fiberglass [6] $1,675 $1,975 $2,305 $2,885 $3,405 304 Stainless Steel $1,675 $1,975 $2,305 $2,885 $3,795
Unattached Riser [8] (Fig. 14)
48" diameter x 42" Length (L dimension) $1,495
Extra length / ft. (extended L dimension) $295
Heating Coil [7] (Fig. 10)
Helical Heating Coil --- $6,790 $6,985 $7,155 $7,340
Tank Bottom Sumps (Fig. 11) Unit Price
8" diameter x 4" depth $3,250
Additional Deflector Plates (Fig. 12) Carbon Steel Stainless Steel
12" x 12" $250 $370
24" x 24" $685 $1,005
Tank Identification Tags (Fig. 13)
Tank Tag $290
Optional cement casing $290
Additional Accessories (Fig. 15 - 18) Size Unit Price
Secondary FRP containment fitting, tank mounted [9] (Fig. 15) 6" $1,100
Reducer Bushings (Fig. 16) 4" x 1" x 1" $275
4" x 2" $275
6" x 4" $275
Extra tank mounted lift lug (Fig. 17) 4', 6', 8' tanks $340
10' tanks $475
Extra lift lug plug [10] (Fig. 18) 4' tanks only $475
Crating / Drop Off / Pick Ups Unit Price
Skid charge (2,500 gallon capacity and smaller) $665
Customer pick up $260
Nylon straps (export, minimum of 2) $305
UPS accessory shipment $140
Double-wall annular space vacuum gauge $220
5
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 14
Fig. 15
Fig. 16
Fig. 17
Fig. 18
MISCELLANEOUS ACCESSORIES
10’
8’8’
6’
4’
40,000 (8) - 18' LP $16,045 (10) $4,050 (20) $7,400 $24,750
35,000 (2) - 18' LP & (4) - 22' LP $12,690 (8) $3,240 (16) $5,920 $19,940
30,000 (6) - 18' LP $12,035 (8) $3,240 (16) $5,920 $19,940
25,000 (4) - 14' LP & (2) - 18' LP $11,270 (8) $3,240 (16) $5,920 $19,940
20,000 (4) - 18' LP $8,020 (6) $2,430 (12) $4,440 $15,135
15,000 (4) - 14' LP $7,260 (4) $1,620 (8) $2,960 $10,330
12,000 (2) - 22' LP $4,340 (4) $1,620 (8) $2,960 $10,330
10,000 (2) - 18' LP $4,010 (3) $1,215 (6) $2,220 $7,925
15,000 (2) - 12' & (4) - 16' $7,915 (6) $2,250 (12) $3,540 $14,905
12,000 (4) - 18' $6,215 (4) $1,500 (8) $2,360 $10,175
10,000 (4) - 16' $5,610 (4) $1,500 (8) $2,360 $10,175
8,000 (4) - 12' $4,620 (4) $1,500 (8) $2,360 $10,175
6,000 (2) - 18' $3,105 (2) $750 (4) $1,180 $5,445
5,000 (2) - 16' $2,800 (2) $750 (4) $1,180 $5,445
6,000 (4) - 14' LP $7,260 (4) $1,300 (8) $2,000 $9,695
5,000 (2) - 22' LP $4,340 (4) $1,300 (8) $2,000 $9,695
4,000 (2) - 18' LP $4,010 (2) $650 (4) $1,000 $5,205
3,000 (2) - 14' LP $3,630 (2) $650 (4) $1,000 $5,205
2,500 (2) - 14' LP $3,630 (2) $650 (4) $1,000 $5,205
1,000 (2) - 14' LP $3,630 (2) $610 ---- ---- ----
600 (2) - 14' LP $3,630 (2) $610 ---- ---- ----
STRAPS TURNBUCKLES (TB)
Standard Strap Split Strap
4' Diameter $305 ----
6' Diameter $325 $1,695
8' Diameter $375 $1,740
10' Diameter $405 $1,775
12' L 14' L 16' L 18' L 20' L 22' L
12" x 12" $1,155 ---- $1,400 $1,555 $1,670 ----
18" x 8" (LP) ---- $1,815 ---- $2,005 ---- $2,170
LP = Low Profile
INDIVIDUAL DEADMAN PRICES
Model Price
6' Diameter TB3406 $250
8' Diameter TB3409 $295
10' Diameter TB3418 $370
[1] Note: 6’ diameter tanks where deadmen are buried 12” below tank bottom, call your CSI inside sales representative for alternate turnbuckles and pricing.
6
DEADMAN ANCHORING
TANK CAPACITY (GALLONS)
# & SIZE OF DEADMEN
DEADMEN PRICE
STANDARD STRAPS TURNBUCKLES [1] SPLIT STRAP ASSEMBLY
PRICE# REQ. PRICE # REQ. PRICE
10’
8’
6’
Notes: [1] Manways are required in all compartments.[2] Price does not include manways, fittings, or other accessories except lift lugs and an annular space fitting.[3] Prices include total number of straps required per tank. Split-straps are extra and include necessary hardware and (1) tightener.
Made To Order Tank Extension
10,000 $53,530 $1,620 (4) 17' 9" 6075 8300
8,000 $35,465 $810 (2) 14' 9" 4875 6875
7,000 $31,340 $810 (2) 12' 4200 5850
6,000 $30,625 $810 (2) 10' 7" 3850 5350
Maximum total compartment tank capacity cannot exceed 50,000 gallons
7,000 $37,230 $1,500 (4) 20' 3" 3600 4450
6,000 $36,055 $750 (2) 17' 6" 3200 4000
5,000 $26,095 $750 (2) 14' 6" 2550 3350
4,000 $21,980 $750 (2) 11' 9" 2200 2800
Maximum total compartment tank capacity cannot exceed 20,000 gallons
3,000 $24,180 $650 (2) 14' 3" 2050 2575
2,000 $20,215 $650 (2) 10' 2" 1600 1975
Maximum total compartment tank capacity cannot exceed 10,000 gallons
The price guide allows for one tank extension per MTO tank. For additional extensions (or more than 2 compartments) contact your CSI representative. Tank extension prices are based on double-wall shells and double-wall bulkhead(s). Tank extensions are available with either a dry cavity or brine filled interstitial space.
7
COMPARTMENT TANK EXTENSIONS
CAPACITY (GALLONS)
TANK EXT. PRICE
[1][2]
ANCHOR STRAPS (# OF STRAPS REQ’D)
[3]
NOMINAL LENGTH
WEIGHT ADDER (LBS.)
DRY CAVITY BRINE FILLED
42" Diameter
3' $1,925 $4,215 --- ---
4' $2,160 $4,440 --- ---
5' $2,305 $4,585 --- ---
6' $2,490 $4,895 --- ---
7' $2,845 $5,140 --- ---
48" Diameter
3' $2,160 $5,245 $2,700 $5,630
4' $2,535 $5,505 $3,170 $5,915
5' $2,745 $5,735 $3,435 $6,165
6' $2,975 $5,955 $3,500 $6,405
7' $3,250 $6,130 $4,065 $6,590
54" Diameter
3' --- --- $3,535 $7,065
4' --- --- $3,980 $7,415
5' --- --- $4,410 $7,755
6' --- --- $4,835 $8,035
7' --- --- $5,270 $8,270
Round single-wall tank sumps include a sump lid, enclosure top, round sump body and AD kit(s). Watertight sumps include a watertight lid and two (2) AD kits which are used to easily bond sump parts by way of adhesive channels. Sump opening dimensions reflect the outer diameter of the sump lid, the accessible opening of the sump is smaller in diameter.
34” 40”
3’ - 7’3’ - 7’
42” or 48” Diameter
34” Opening Watertight Sump
48” or 54” Diameter
40” Opening Watertight Sump
8
ROUND SINGLE-WALL TANK SUMPS
34” OPENING 40” OPENING
FRICTION FIT WATERTIGHT FRICTION FIT WATERTIGHT
42" Diameter
3' (SBS) [1] $4,080 $5,275 --- ---
4' $4,095 $5,285 --- ---
5' $4,455 $5,635 --- ---
6' $4,805 $5,975 --- ---
7' $5,160 $6,355 --- ---
48" Diameter
3' (SBS) [1] $4,445 $5,735 $5,560 $6,165
4' $4,465 $5,780 $5,580 $6,215
5' $4,880 $6,220 $6,090 $6,685
6' $5,285 $6,635 $6,610 $7,125
7' $5,690 $7,170 $7,110 $7,700
54" Diameter
4' --- --- $6,445 $7,960
5' --- --- $6,880 $8,395
6' --- --- $7,315 $8,935
7' --- --- $7,740 $9,680
Polygon single-wall tank sumps include a sump lid, enclosure top, 8 panel polygon body, and (2) AD kits. The flat panels on the polygon body allow for 45° and 90° penetration fittings. Single-Wall polygon sumps utilize adhesive channels for easier field bonding. Sump opening dimensions reflect the outer diameter of the sump lid, the accessible opening of the sump is smaller in diameter.
34” 40”
3’ - 7’3’ - 7’
42” or 48” Diameter
34” Opening Watertight Sump
48” or 54” Diameter
40” Opening Watertight Sump
Notes: [1] Shallow Bury Sump (SBS)
9
POLYGON SINGLE-WALL TANK SUMPS
34” OPENING 40” OPENING
FRICTION FIT WATERTIGHT FRICTION FIT WATERTIGHT
All double-wall sumps include a watertight lid and integral reservoir for interstitial space monitoring. Sumps are shipped in multiple pieces and require field assembly to install properly. There are two (2) double-wall sump models and three (3) diameters available for each. One (1) MFFK is shipped with each order for brine filling. All prices and models are based on brine filled sumps.
EZ-FIT MODEL DW SUMPThe EZ-Fit tanks sump (AD model) features EZ-Fit adhesive channels for easier field bonding. 42” and 48” EZ-Fit sump prices include (4) AD kits, 54” EZ-Fit sump prices include (6) AD kits. This sump is eligible for the 30-year HydroGuard® warranty when purchased with a CSI double-wall hydrostatically monitored tank.
BASIC LK DW SUMPThe LK sump (LK model) relies on field bonded butt joints by means of glass and resin lay-ups. 42” and 48” sump prices include (4) LK kits, 54” sump prices include (6) LK kits.
42" Diameter
4' $14,790 $13,570 --- ---
5' $15,255 $14,005 --- ---
6' $15,785 $14,450 --- ---
7' $16,235 $14,830 --- ---
48" Diameter
4' $15,860 $14,830 $16,225 $15,265
5' $16,360 $15,140 $16,720 $15,780
6' $16,920 $15,585 $17,295 $16,365
7' $17,420 $16,025 $17,800 $16,875
54" Diameter
4' --- --- $17,500 $17,825
5' --- --- $18,690 $18,995
6' --- --- $19,825 $19,315
7' --- --- $21,030 $20,370
10
POLYGON DOUBLE-WALL TANK SUMPS
34” OPENING 40” OPENING
EZ-Fit (AD) LK Model EZ-Fit (AD) LK Model
34” 40”
3’ - 7’3’ - 7’
42” or 48” Diameter
34” Opening EZ-Fit Sump
48” or 54” Diameter
40” Opening EZ-Fit Sump
Notes: [1] Select Desired Tank Sump first, then add sump bottom price. Tank Mounted Adapters are supplied by others.[2] Flat Bottom Sumps may also be used as Transition Sumps.[3] Additional delivery charges apply.[4] Strap channel required when hold down strap intersects collar.[5] Split Strap will not fit inside containment collar.[6] Available for tank sumps with 34" openings only. [7] Available for tank sumps with 40” openings only.
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Flat Bottom Round FBS 42" or 48" [1][2] 42" Dia. 48" Dia.
Single-Wall Sump Adder $1,420 $1,525
Flat Bottom Polygon FBS 42" or 48" [1][2]
Single-Wall Sump Adder $1,420 $1,525
Double-Wall Sump Adder $1,490 $1,590
SW Watertight Tank Sump Parts
(WT34) Sump Top $1,355 $1,530
(WT34) Gasket $135 $135
(WT40) Gasket $175 $175
SW Friction Fit Tank Sump Parts
(FF34) Sump Top $530 $700
Secondary Containment Collar (Fig. 1) Single-Wall Double-Wall
42" Diameter Collar - 6" $1,795 $2,175
42" Diameter Collar - 14" [3] $2,185 ---
48" Diameter Collar - 6" $2,170 $2,405
48" Diameter Collar - 14" [3] $2,625 ---
54" Diameter Collar - 6" $3,655 $3,820
Collar Strap Channel [4][5] (Fig.2) Unit Price
Single-Wall Strap Channel - 42" Collar $905
Single-Wall Strap Channel - 48" Collar $1,025
Turbine Lid (Fig. 3)
Turbine Lid for 34" opening (WT or FF sump) $670
Turbine Lid for 40" opening (WT or FF sump) $810
Fill Vapor Lid (Fig. 4)
FV 2/15/16 (15" cuffs) [6] $670
FV 2/13/16 (13" cuffs) [6] $670
Quad Fill (4 cuffs) [7] $1,330
Factory Installed Inspection Port (Fig. 5)
INS4 - 4" Watertight Port $490
INS6 - 6" Watertight Port $520
11
TANK SUMP ACCESSORIES
Field Installed Inspection Port Kits [8] (Fig. 8)
KIT-INS4 Includes 4" Watertight Port $490
KIT-INS6 Includes 6" Watertight Port $520
Kits for Joining Sump Components [8] Unit Price
KIT LK - for Layups $410
KIT AD - for Adhesive Channels $410
Monitoring Fluid
5 Gallon Brine Bucket $40
5 Gallon Propylene Glycol Bucket $120
Monitoring Fluid Fill Kit for Fill DW Tank Sumps (Fig. 6)
MFFK $275
Test / Drain Fitting (Fig. 7)
Collar Fitting $165
Fig. 6Monitoring
Fluid Fill KitMonitoring
Fluid Fill Kit
Monitoring
Fluid Fill Kit
Mon
itorin
gFl
uid
Fill
Kit
Monitoring
Fluid Fill Kit
Fig. 7
Fig. 8
Notes: [8] Hazardous material - ground shipment only (3 - 5 days)
12
TANK SUMP ACCESSORIES
While Containment Solutions has taken every precaution as to the accuracy of content and data presented herein, Containment Solutions cannot be held responsible for the individual interpretation of the data presented, any loss or damage to any property whatsoever, injury or death to any persons whatsoever, or any claims, demands, actions, complaints, proceedings, judgment, losses, damages, compensation, liabilities, costs or charges, however arising from the unauthorized undirected use of this handbook or the data it contains.
© January 2018 • Containment Solutions, Inc. • All Rights Reserved • Pub. No. PG 11000X
333 North Rivershire Drive, Suite 190Conroe, Texas 77304
Tel: (936) 756-7731 • Fax: (936) 756-7766www.containmentsolutions.com