HKIE Journal_Apr_V49 - Hong Kong Engineer
-
Upload
khangminh22 -
Category
Documents
-
view
3 -
download
0
Transcript of HKIE Journal_Apr_V49 - Hong Kong Engineer
49APR 21
VOL
Hong Kong Engineer is the official journal of The Hong Kong Institution of Engineers (HKIE) and is published by the Publisher, Printers’ Circle Ltd. The Institution and the Publisher retain copyright in all materials published in the journal. No part of this magazine may be reproduced or transmitted in any form or by any means, or stored in any retrieval system of any nature without the prior written permission of the HKIE and the Publisher. The HKIE and the Publisher have endeavoured to ensure the published information is correct and lawful at the time of printing, but the HKIE and the Publisher do not make any warranties or representations, express or implied, with respect to any information in this publication nor do the HKIE and the Publisher endorse the accuracy, completeness, non-infringement, timeliness or reliability of any information in this publication. The HKIE and the Publisher will not be responsible or liable for any loss, claims, damages, liabilities, costs and expenses of any kind whatsoever arising out of the information in this publication. The contents of articles and advertisements in the journal do not necessarily reflect the views and opinions of The Hong Kong Institution of Engineers.
ISSN 1607-9183
Printed by Printers’ Circle LimitedApril print run: 14,200 copiesThis journal is printed with soy ink
Publisher: Peter TungAssociate Publisher: Selina Tung Sub-editor: K B ChiuContributors: Hong Kong Economic Times, the Environment
Bureau and the Electrical and Mechanical Services Department, the HKSAR Government, Arup and Ir Billy Cheung
Creative Director: Peter TungGraphic Designer: Dennis HuiMarketing Director: Selina TungMarketing Executive: Peggy Chiu
Cover design: Headman & Partners Ltd
Journal Editorial CommitteeChairman: Ir David C H ChangMembers: Ir Derrick H K Leung, Ir Ambrose H T Chen, Ir C M Choi, Ir Prof Ken Ho, Ir Ben B Wong, Ir C K Hon, Sandy So, Selina Tung
Editorial Columns:Should you wish to contribute articles for publication of editorial columns in the Journal, please send your emails and relevant information to [email protected].
Hong Kong Engineer welcomes editorial contributions from readers. Paper submissions should not exceed 2,000 words in length. They should be provided in Word or Rich Text format, with images supplied in good quality JPEG format. Detailed guidelines may be obtained from the Institution. Submissions to the Letter to the Editor column should not exceed 400 words in length. No image should be submitted for this column. The Journal Editorial Committee reserves the right to accept or reject any contribution and the decision is final.
Advertising and Subscription Office:Unit 401-5 Paramount Building12 Ka Yip Street Chaiwan Hong KongTel: 2562 6138 Fax: 2558 7216Advertising email: [email protected] email: [email protected]
Advertising options include display advertisements and mail insertion. Advertisements that appear in the journal imply neither endorsement nor recommendation by The Hong Kong Institution of Engineers.
Hong Kong subscription : HK$50 per issue HK$550 per year
Overseas subscription : HK$750 / US$100 per year
HKIE Headquarters:9/F Island Beverley No 1 Great George StreetCauseway Bay Hong KongTel: 2895 4446 Fax: 2577 7791Email: [email protected]
HKIE Website
02 THE DRAGON & THE BEAVER
05 UPDATE
06 COVER STORY
How recycling technology can keep Hong Kong’s landfills
from getting overfull
17 LETTER TO THE EDITOR
23 INSTITUTION & DIVISION ACTIVITIES
• The HKIE Young Engineers Arthur & Louise May Memorial
Scholarship (Cycle 2020/21)
• 香港工程建設專業機構及人士大灣區執業備案辦法簡介會
• The Enginpreneurs Hub webinar - February series
• Webinars for Innovation Expo 2021 (March series) - Green
technology opportunities amidst the plastic and waste
problem during the pandemic
• Major changes of the CoP for the Electricity (Wiring)
Regulations 2020 Edition and practical implementations
• Technical seminar on emerging mobility trends
impacting Hong Kong
• Seminar on deep learning demystified
• Webinar on the route to Registered Quality
Management Engineers
• Seminar on how safety works in two independent lift cars
operating in one shaft
37 NOTICES TO MEMBERS
45 MEMBERSHIP
48 CPD PROGRAMME
53 CLASSIFIED
55 GENERAL INFORMATION
56 LEGCO NEWS
NO 04
CO
NTEN
TS
THE D
RA
GO
N &
THE BEA
VER
April 2021 I Hong Kong Engineer2
Media - A medium for listening to the EngineersAs engineers, we spare no efforts to offer our expertise and
innovative ideas on improvement of people’s living quality
for the betterment of the society. By giving advices to the
Government and the general public, we hope to provide
solutions to problems or inspire more discussions in order
to engender collective wisdom. That is why the Institution
works closely with the media on topical matters where
engineers’ opinions are warranted.
In the past few months, the Institution has conducted
about 40 interviews with various media including print,
online and electronic news programmes. These interviews
have covered a wide spectrum of areas including sanitary
and public health concerns arising from the COVID-19
pandemic, reclamation, heritage conservation, fire safety
and many more.
On many occasions, our President, Ir Prof P L Yuen has been
on the front actively providing practical, informative and
prompt advices to the public on drainage arrangements,
ventilation and air exchange issues helping people to
combat the pandemic. Readers may already note that
Ir Prof Yuen has also been appointed by the Government
as Chairman of the Working Group on Implementing the
Requirement on Air Change or Air Purifiers in Dine-in
Restaurants under Cap 599F, thus making further
contributions to assist Hong Kong in fighting the virus.
We do hope that our public voice can help educate the
public on matters concerning the profession, uplift the
professional status of engineers as well as provide useful
expert advice to the society in this difficult time.
THE D
RA
GO
N &
THE BEA
VER
April 2021 I Hong Kong Engineer 3
COUNCIL NEWS - MARCH MEETINGElection of CouncilThe 46th Annual General Meeting (AGM) of the Institution will be held on 28 June 2021 at the Hong Kong Convention and Exhibition Centre. Preparation for the meeting has commenced.
The Council noted the nomination of candidate for vice presidency. In accordance with the nomination procedures for election of Vice President, the candidate will be invited to make a presentation to the Council Members before the Council finalises its nomination of Vice President for election by Corporate Members on the day of the AGM. A Council meeting (Special) will be held on 22 April 2021 for the purpose and the meeting will be open for Corporate Members to view the proceedings of the meeting and presentation(s) of candidate(s) by real time broadcasting at the HKIE Headquarters.
With regard to the Elected Ordinary Members, the Council resolved that there would be five seats for Elected Ordinary Members up for election on the day of the AGM. Nomination forms together with the Guidelines for Election are obtainable at the HKIE Headquarters or from the HKIE website at http://www.hkie.org.hk.
The eligibility for election to these posts is stipulated in the Constitution.
Venue for the 46th Annual General Meeting (AGM)Noting that the Institution’s booking with the Hong Kong Red Cross Headquarters (HKRC) would not be confirmed until late April or May 2021 and after considering the various constraints imposed on the arrangement of the AGM at HKRC under the current circumstances together with the risks involved, the Council approved to choose the Hong Kong Convention and Exhibition Centre in lieu of HKRC as the AGM venue and voting centre for the afternoon session on 28 June 2021.
Proposed e-registration for AGMTo enable better management of people flow among the queues for the registration stations at the AGM elections and to shorten the registration time, the Council approved the proposal for e-registration for the AGM.
The Enginpreneurs Hub Webinar Series The Institution continued to arrange webinars to facilitate the development of members’ innovation skills under the Enginpreneurs Hub. In March 2021, two webinars, delivered by Mr Bart Fong and Dr Vincent Fung respectively, were held to share with HKIE members their experience in patent applications in Hong Kong and in digital transformation for smart manufacturing facilities. Details of these two webinars will be reported in the next issue of the Journal. The two Enginpreneurs Hub webinars in February 2021 were well received and a report of these events is available on page 25 of this Journal.
Webinar Series for the HKIE Innovation Expo 2021The Institution sustains the endeavours to arrange webinars to offer up-to-date information on innovation and technology to members as part of the HKIE Innovation Expo 2021 under the Presidential theme. On 5 March 2021, a webinar delivered by Dr Yau Wing-kwong, JP was held to enlighten members about the recycling opportunities arising from the innovative green technology amidst the public health challenges posed by the pandemic. The webinar, which had received overwhelming responses, was also submitted by the Institution to the World Federation of Engineering Organisation as one of the celebration events for the World Engineering Day. A report for the event is available on page 26 of the Journal.
Electronic Membership Card for Student MembersThe HKIE is pleased to introduce a new service of electronic membership card (e-membership card) for all Student Members in replacement of the physical membership card. Student Members may view the e-membership card online in the Member Login area on the HKIE website http://www.hkie.org.hk.
Student Members’ e-membership card under the Free Student Membership Scheme will be renewed automatically in March every year during the period of the Scheme.
For Student Members who received the payment advice of membership subscription for the financial year 2021-2022 this February, the e-membership card will be available five working days after the successful settlement of the membership subscription fee.
HKIE Transactions Online: A paperless reading experience anytime, anywhere and for everyoneTo encourage the transfer of engineering knowledge, HKIE Transactions is now paper-free and subscription-free. Both HKIE members and non-members are welcome to enjoy free online access to the HKIE Transactions archive anytime and anywhere on the go! Do not miss this opportunity to enjoy a better reading experience at HKIE Transactions Online via https://www.hkie.org.hk/hkietransactions/.
April 2021 I Hong Kong Engineer 5
UP
DA
TE
in February 2021. Both projects involve DCS pipe laying, as
well as the design, construction and operation of DCS plants,
and aim to provide district cooling services commencing
from around 2026 to meet the population intake schedules.
DCS is a large-scale centralised air-conditioning infrastructure
which creates green job opportunities and reduces the heat
island effect. It is more energy efficient than the traditional
central air-conditioning system in individual buildings and
achieves energy saving by taking advantage of economy
of scale and load diversity of various buildings.
This article is contributed by the Environment Bureau and the Electrical and Mechanical Services
Department, the HKSAR Government
As mentioned by the Chief Executive in the 2020 Policy
Address, Hong Kong will strive to achieve carbon neutrality
before 2050. To this end, the Government will examine
various means and take forward different measures to
reduce carbon emissions. Against this background, the
Environment Bureau and the Electrical and Mechanical
Services Department have been spearheading the
implementation of District Cooling System (DCS) in new
development areas, including Tung Chung New Town
Extension (East) and Kwu Tung North New Development
Area.
The Finance Committee of the Legislative Council recently
approved the DCS funding proposals for Tung Chung East
(HK$3,918.2 million) and Kwu Tung North (HK$5,787.7 million)
Legislative Council approved District Cooling Systems at Tung Chung East and Kwu Tung North
Designed by Herzog & de Meuron in partnership with
TFP Farrells and Arup, the long-awaited M+ has completed
its construction of museum building and is set to open to the
public by the end of 2021.
With a total footprint of 65,000 sq m, the M+ building houses
17,000 sq m of exhibition space across 33 galleries. Its
eye-striking inverted T shape is a simple design, yet its facade
is something special. The podium and tower are united as
concrete structures clad in ceramic tiles that reflect the
changing conditions of light and weather. The tower is
covered with 140,000 pieces of ceramic tiles, many with
windows in between. They are laid out in a horizontal louvre
structure to provide sun shading to the museum’s interior
spaces.
The M+ building sits directly above tunnels for the MTR Airport
Express and Tung Chung Line. The excavation around the
railway tunnels produces a ‘found space’ that provides an
anchor for the building for hosting dynamic and rotating
installations. To facilitate the construction, the project team
needed to control the tunnel movements in accordance with
strict limits set by Hong Kong’s transit and building authorities.
The engineering solution included the use of five mega-trusses
which prevent the massive structure loading on the tunnels.
The landmark building also includes three cinemas,
a mediatheque, a learning hub, a research centre, a roof
garden, a members lounge, a coffee and tea bar, museum
shops, restaurants and offices, providing a space for learning,
interpretation and inspiration set against the backdrop of
Victoria Harbour.
This article is contributed by Arup.
M+ museum building completed
CO
VER
STOR
Y
April 2021 I Hong Kong Engineer6
How recycling
technology can keep
Hong Kong’s landfills
from getting overfull
Covid-19 has changed the world in a myriad of unexpected ways.
From how we conduct business to the way we buy food, this
coronavirus has forced us to adopt habits and technologies
to keep our businesses afloat, our stomachs full, and to help
us carry on with our daily lives in general. Meetings are now
conducted online, wearing of face masks, and take-out
meals to be the norm instead of a last-minute option, under
pandemic restrictions.
Our natural environment, too, has been affected. The sharp
drop in international travel and manufacturing activity has
decreased the amount of carbon dioxide (CO2) being
pumped into the atmosphere. According to research by
the University of East Anglia, the University of Exeter and
the Global Carbon Project there has been a 7% drop in
greenhouse gas emissions to the tune of 2.4 billion tons
between 2019 and 2020, which is the most significant decline
on record.
Flora and fauna that have been absent from their natural
habitats for years have now reappeared, such as the
re-emergence of pink dolphins in Hong Kong. While this is
good news, the truth of Covid-19’s impact on the environment
is far more staggering.
Our waste problemHong Kong’s issue with waste was severe enough before
the pandemic. During 2018, the Environmental Protection
Department (EPD) recorded 5.87 million tonnes of solid waste
being dumped into landfills. This amounted to about 1.53 kg
of waste created every day per person - which is also an
increase from 5.66 million tonnes created in the previous year.
Of this total figure, only 30% was recycled.
During the pandemic, with most people being encouraged
to stay at home and to wear single-use personal protective
equipment (PPE) when going out, the rate at which we
are generating rubbish is expected to be even higher.
With thousands of take-out bags, boxes and utensils being
thrown away by stay-at-home dinners every day, both the
lack of public awareness and effective system for collecting
recyclable waste means that these likely end up in our
landfills. The same is true for single-use surgical masks, which
are not only challenging to recycle but often are carelessly
disposed of on our sidewalks, forests, hiking trails, and
beaches.
By Hong Kong Economic Times
CO
VER
STOR
Y
April 2021 I Hong Kong Engineer 7
One-time use plastic items are one of the greatest threats to the environment
Used surgical masks are often carelessly disposed of on our sidewalks, forests, hiking trails, and beaches
Each Hong Kong resident is dumping 1.53 kg each day into the landfills
The EPD also has warned that our current landfills, which were
only meant to last us until 2020, might have been filled earlier
if nothing was done to minimise waste loads. In response,
extensions of the current three strategic landfills still in use
are being put forward, with old ones being turned into areas
available and safe for the public, such as parks and sports
grounds.
Hong Kong is far from the only one suffering from waste-
related headaches. In China, the Ministry of Ecology and
Environment estimated that Wuhan hospitals produced
240 tonnes of waste daily during the height of the pandemic.
The Thailand Environment Institute saw their country’s plastic
waste creation increase from 1,500 tonnes to 6,300 tonnes per
day.
According to research by the University of Alberta in Canada,
15 countries in Africa alone are estimated to use 586,833,053
face masks every day. This also creates a pressing issue of
how all this waste is going to be processed given the limited
access to recycling equipment and technology.
“During 2018, the Environmental Protection Department (EPD) recorded 5.87 million tonnes of solid waste being dumped into landfills…Of this total number, only 30% was recycled.”
CO
VER
STOR
Y
April 2021 I Hong Kong Engineer8
While every country’s situation with waste is unique, recycling
remains to be one of the most direct ways all of us can focus
on to begin moving towards a more sustainable society.
The state of recycling in Hong KongIn Hong Kong, recycling is carried out at both grassroots and
enterprise levels.
Grassroots groups have been at the forefront of Hong Kong’s
recycling efforts and have been heavily relied upon for waste
collection and sustainability education for years. Greeners
Action, a local NGO that collects recyclable waste from
commercial and industrial buildings, could keep up to
40 tonnes of waste from being dumped into our landfills with
its HK$7.1 million trial scheme funded by the Government’s
Recycling Fund. This scheme is the first of its kind and
hopes to pave the way for more Government-supported
recycling schemes in the future. Various NGOs, including
those that are not affiliated initially with green causes, have
also participated by turning part of their workspaces into
collection points. Sadly, many of these grassroots groups
have ceased operations due to the coronavirus outbreak.
Community Green Stations set up by the EPD are some of the
few remaining collection points where the public can dispose
of their recyclables under the pandemic.
For enterprises that recycle for profit, one would think that
business is doing well given the amount of waste being
produced. That would be the case if most of this waste even
reached the recycling facilities in the first place. Instead,
much of it ends up in trash bins designated for landfills. In
2019, Baguio, one of Hong Kong’s largest waste collection
contractors, processed 40 tonnes a day at its glass recycling
facility in Lung Kwu Tan, which is only half of the 100-tonne
capacity it was designed to handle. On top of not receiving
enough glass to fill production capacity, Baguio faces the
additional challenge of having to sort out non-glass items
by hand, such as metal cans, plastic bottles, and take-out
utensils. Baguio’s Project Manager, Delvin Cheng Chung-
wang laments: “People think anything that looks like glass
is glass, so there’s everything in here. Ceramics, porcelain,
crystal, full bottles of ketchup, wine or soy sauce and, of
course, just everyday trash like aluminum cans and plastics.”
However, as of November 2019, Baguio was ordered to
suspend glass collection services and remove many of their
glass collection bins from the streets, citing “recent social
circumstances.”
Another recycling enterprise is MilMill, Hong Kong’s first paper
carton recycling plant. Their production line can handle
20 tonnes of materials if it operates non-stop for 24 hours,
but had been receiving only one tonne a day before the
pandemic. After the onset of Covid-19, the amount of
materials they received drastically decreased to around
100 kg per day due to the redirection of cartons away from
their former collection points in schools, offices, and other
public areas. Fortunately, MilMill has been able to bring that
number back up to one tonne by setting up new collection
points and rebuilding their network with the support of district
councillors. Equally as important is MilMill’s role as an educator
on sustainable habits, holding activities and regular tours at its
facility for the public. These tours are currently suspended due
to pandemic restrictions.
The synergy of both grassroots groups and recycling
enterprises is clear: the former helps to collect recyclable
waste, while the latter processes it. The problem now is that
neither of these is functioning at full capacity, either due to
pandemic restrictions or a lack of public effort to recycle.
How can technology facilitate recycling?Technological innovation has always been one of Hong
Kong’s strengths when it comes to tackling problems. With
funding support from the Government and access to world-
class technologies and talents, engineers with relevant
know-how are more than equipped to overcome recycling
challenges created by the pandemic and beyond.
Recycling thermoplastics
One recent innovation is the development of a new way
of recycling thermoplastics (Patent 10052795). Patented
in Hong Kong in 2018, this recycling system pushes plastic
waste against a rotating frictional heater, transforming it into
a molten form that can be directly pelletised or injection
“People think anything that looks like glass is glass, so there’s everything in here. Ceramics, porcelain, crystal, full bottles of ketchup, wine or soy sauce and, of course, just everyday trash like aluminum cans and plastics.” Delvin Cheng Chung-wang, Baguio’s Project Manager
CO
VER
STOR
Y
April 2021 I Hong Kong Engineer 9
molded. The combination of shear forces and molten plastic
fragments then distributes contaminants such as paper, dirt,
food, foil, and other foreign materials evenly throughout
the mixture. With this technology, plastic wastes with
contaminants can still yield higher quality products giving
a clear advantage over many other systems. As described
in the patent: “Appropriate blending, mixing and melting
parameters [allow] the use of many plastics and plastic
composites that otherwise could not be effectively recycled,
and the range of plastic mixes that comprise possible input
and output variants is endless.” This also makes recyclers less
reliant on manual sorting for ensuring material purity and
may even help to keep operations running should pandemic
restrictions require workers to stay home.
Pyrolysis
Another recycling process worth delving deeper into is that
of pyrolysis. Through this process, material is burned past its
decomposition temperature in an anaerobic environment,
resulting in the separation and extraction of burnable fuel
and purified materials with numerous industrial applications.
Wood, plastic and tire rubber are some common materials
that can undergo pyrolysis, with all three of these yielding fuel
in various material states. Pyrolysed tire rubber, for example,
yields fuel and carbon black - a key reinforcing agent in
rubber and a pigment that offers a degree of UV protection
and conductivity, which can see use in marine, industrial,
aerospace, or simple decorative applications. Pyrolysed
wood can produce end-products such as activated carbon
and organic fertilisers such as wood vinegar, the latter of
which is separated out from the combustible gases produced
during pyrolysis. Particularly for wood, pyrolysis gives us an
alternative solution to just simply leaving out large amounts
of wood to decompose, which can be useful for quickly
processing fallen trees from typhoons. Currently, one such
facility for wood pyrolysis is in development at EcoPark in Tuen
Mun.
Automated sorting with Artificial Intelligence (AI)
On the topic of sorting, another way technology can aid
the recycling effort is through automation, as current waste
sorting at Hong Kong’s recycling facilities is mostly done by
hand. Although the amount of material that is received by
these facilities leaves much to be desired, automating this
tedious and repetitive task can save operations costs and
increase overall output. TOMRA, a European-based recycling
technology company, develops automated sorters that can
separate different recyclable materials based on factors such
as colour, density, size, and ballistic attributes. Integrating
specialised optical and sensor equipment even allows these
sorters to gather data from waste flows on the production line
and learn how to make more efficient sorts over time, also
known as artificial intelligence via deep learning. Investment
in such technology could lead to less reliance on manual
sorting and higher purity in processed materials, both of which
are good news for the recycler’s bottom line.
On a similar note, Polyethylene Terephthalate (PET) recycling
technology that is currently used in Hong Kong also uses light
spectrum technology to sort out plastics of different colours.
The plastics are then subject to crushing and deep cleaning
to produce high quality PET pellets for further industrial
application.
Electronic waste processing at WEEE Park
Other than plastics, Waste Electrical and Electronic Equipment
(WEEE) is another major source of waste to fret about, with
around 60 to 70 tonnes of WEEE having ended up in Hong
Kong’s landfills per day in 2018. To remedy the situation, the
Government developed a WEEE treatment and recycling
facility in EcoPark, Tuen Mun. Various electronics, especially
those used in households, are sent here to be processed
according to type, such as refrigerators, air conditioners,
computers, and more. Incoming WEEE is sorted and sent
through four different processing lines: refrigerator processing,
air-conditioning processing, dismantling and material sorting,
and Cathode Ray Tube (CRT) detoxification. Diagrams
breaking down each of these processes can be found on the
Government WEEE Park website. In 2020, of the 23,383 tonnes
of WEEE treated, 20,274 tonnes of materials were recovered.
Despite the coronavirus, the park remains fully operational
today.
Solar panel recycling - Challenging but worthwhile
Unfortunately not all electronic waste is easy to recycle. Items
like solar panels, for example, are relatively costly to recycle,
with few to no recyclers in Hong Kong currently willing to
collect and process them. This, however, does not mean that
solar panels have little valuable materials housed within them.
Silicon, copper, silver, aluminum, and glass are all materials
that, if recovered effectively, have high resale value. The
task for engineers would be to develop ways to extract these
materials while retaining their value, or even designing new
solar panels that allow these materials to be easily extracted.
In 2019, researchers from the EU-funded project CABRISS
began developing a novel extraction method using a water-
based technology and lasers to open thin-film photovoltaic
panels with minimal damage. This not only preserves the
CO
VER
STOR
Y
April 2021 I Hong Kong Engineer 11
high-quality glass film but also allows the other materials
underneath to retain purity when extracted. As explained
by CABRISS project coordinator David Pelletier, “For Si-based
PV modules, an innovative and water-based technology
was developed which, unlike conventional shredding
technologies, does not break glass resulting in the collection
of all materials in Si PV modules.”
In addition to recycling solar panels, it is also worth exploring
how they can instead be upcycled - in other words, finding
a more creative use for them. In fact, while old solar panels
may not be as efficient as their newer counterparts in
generating energy for commercial applications, they can still
be useful for everyday low-voltage tasks. Berlin-based start-
up SunCrafter upcycles retired solar panels to create off-
grid power stations, which can be used to charge phones,
scooters, and power other low-voltage mobile devices.
Christian NGOs Youth with a Mission and Working for the
Son Solar use decommissioned panels to help build solar
microgrids that generate and store electricity for areas with
no power in more than 20 countries.
allocated HK$100 million towards the development of smart
bins in residential areas through the scheme “Supporting
Residential Buildings in Adopting Smart Bins Technology
in Food Waste Collection and Recycling”. According to
the relevant Guidance Notes published by the Recycling
Fund, these smart bins will use computer software for user
identification and smart sensors to measure and track food
waste being thrown away by each individual resident. This is
done with the goal of promoting better separation of waste
and raising awareness among residents on the importance of
recycling food waste. The data collected by the smart bins
will be useful for recyclers to determine optimal collection
times and routes that yield productive waste loads.
Reverse Vending Machine
Speaking of tracking individual recycling habits, one project
the EPD has been experimenting with for the last 10 years is
the Reverse Vending Machine (RVM). Now in its third iteration,
the RVM system is packed with a variety of smart features
and now accepts metal and paper recyclables, in addition
to plastic. Using a smart weight detector, the system can
identify and reject plastic bottles with liquid contents in them.
A material compressor and capacity alert system increases
storage and collection efficiency, the latter of which
automatically alerts relevant authorities when the machine
is nearly full. A mobile app also allows users to track their
contributions and receive redeemable rewards, which is
a key incentive to encourage the public to use these
machines. Finally, real-time recycling data is uploaded to the
cloud from all machines across Hong Kong, giving researchers
insight into what is being recycled in correlation to where
and when. Placement of these machines will target primarily
residential areas to encourage hassle-free recycling of
household wastes.
Outreach campaigns by the Environmental Protection DepartmentWhile having the best recycling technologies at our disposal
would surely be an advantage, the root of the problem
lies further up the recycling chain - in other words, people
and their wasteful habits. That is why outreach campaigns,
especially those organised by the EPD, are so crucial in the
fight to combat our waste problem. However, teaching the
public about the importance of recycling is something far
from new, having been attempted in the past by countless
Government and NGO initiatives alike.
Solar panels are primarily composed of glass, plastic, and aluminum that can be recycled
Organic waste recovery
Organic waste is not one that immediately comes to mind
when one thinks of recyclable materials. Located in Siu Ho
Wan, North Lantau, O · PARK1 is one such recycling facility
that converts organic waste into electrical power. It does so
by processing up to 200 tonnes of organic matter a day into
compost products and biogas, the latter of which can be
used to generate electricity. The process is also able to filter
out impurities such as glass, metal, stone, sand, plastic bag
fragments and other over-sized contaminants over 16mm in
size. Construction of O · PARK2 is currently underway, which
will be designed to process up to 300 tonnes of organic waste
each day - a small but hopeful fraction of the 3,600 tonnes of
food waste being sent to our landfills every day.
To ensure this food waste even gets to the relevant recycling
facilities, the Hong Kong Government’s Recycling Fund has
AS
TA &
DE
KR
A K
EM
A C
ertified
TECHNICAL DATA• Power supply: 240VAC, 415V AC• In compliance with standards: - MCB Board: IEC61439-3:2012 - MCCB Board: IEC61439-2:2011• Degree of protection: IP41 up to IP44• Surface mounting• Busbar rating: - MCB SPN Board: 100A - MCB DPN, TPN & 4P Board: 125A upto 250A, 4way to 18way - MCCB TPN Board: 250A upto 800A (with max. 400A outgoing), 4way to 18way• High quality epoxy powder surface coating• Short circuit breaking capacity: - MCB Board: 16kA / 24kA - MCCB Board: 50kA
1/F., Flat D, Block B, Marvel Ind. Bldg., 17-23, Kwai Fung Crescent, Kwai Chung, N.T. Hong Kong. Tel: (852) 2614 8133 Fax: (852) 2408 3867 Home Page: www.fairrack.com E-mail: [email protected]
CO
VER
STOR
Y
April 2021 I Hong Kong Engineer 13
Renewable or recycled materials are one of the key ways to reduce the overuse of disposable tableware
Fortunately, a recent push by the EPD however has shown
much promise - the new “Recycling Stores” being one such
glowing example. These Recycling Stores aim to incentivise
recycling by providing the public with a convenient location
to bring recyclable waste while rewarding individual
contributions. Every resident who brings a minimum of 2 kg of
recyclable goods can turn them in at designated facilities and
earn points (Greeny Coins) on a GREEN$ smart card. These
points can then be redeemed for everyday-use items, as well
as many sustainably-made goods such as bamboo tissues
and recycled plastic bags. As noted by Dr Yau Wing-kwong in
a recent webinar on “Green Technology Opportunities amidst
the Plastic and Waste Problem during the Pandemic” hosted
by the HKIE, the first pilot store that opened in 2020 was very
well received by the public, with many recyclers even willing
to go the extra step to remove staples from books and ensure
their recyclables are fit for processing. There are now 22
recycling stores set up across 18 districts in Hong Kong, most
of which were gradually set up throughout Q1 of 2021.
Recycling Stations are also another crucial part of the
EPD’s public education campaign. On top of working
with nearby residential estates and companies to roll out
localised recycling programmes, educational activities such
as exhibitions, workshops and others are regularly held at
these recycling stations. As at October 2020, 7,000 tonnes of
recyclables have been collected across Hong Kong’s nine
Recycling Stations.
Finally, “Recycling Spots” have fulfilled the more grassroots
role of the EPD’s recycling outreach campaign. Since the
fourth quarter of 2020, over 100 recycling spots have been
set up at regular times near single blocks or buildings without
owner corporations (also known as “three nil buildings”).
This is to help reach out to those residents that may not have
easy access to waste separation facilities in the absence of
a managing entity. If these fresh pushes towards a green-
conscious society have proven anything, it is that Hong Kong
people are capable of learning recycling habits - be it for
hygienic reasons and, perhaps more importantly, our future
generations won’t have to suffer our wasteful consequences.
From waste collection to recycling and all the detailed
processes in between, many ways exist through which
engineering talents and technologies can be applied
to enhance efficiency. While cities may possess different
strengths in promoting sustainability awareness and practice,
one aspect we certainly do not lack here in Hong Kong
is technological capability. We have what it takes, and
hopefully, through funding schemes such as the Recycling
Scheme and the Green Technology Fund, we can pool
our financial and intellectual resources together to make a
cleaner Hong Kong, pandemic or not.
CEMENTAID (HONG KONG) LIMITEDRoom 3401-03, Singga Commercial Centre, 148 Connaught Road West, Hong KongTel: (852) 2858 3313 Fax: (852) 2858 1638 Website: www.cementaid.com E-mail: [email protected]
For more information, please contact us via the following:
you can RELY on
The Way to Better Concrete
C
M
Y
CM
MY
CY
CMY
K
Cementaid_Apr20_OP.pdf 1 24/3/2020 4:20 PM
CO
VER
STOR
Y
April 2021 I Hong Kong Engineer 15
References• Brock J (2020). The Plastic Pandemic: Covid-19 Trashed the Recycling
Dream. Reuters. [online]. Available at: https://www.reuters.com/investigates/special-report/health-coronavirus-plastic-recycling/. [Accessed 30/01/2021].
• CORDIS EU Research Results (2018). Recycling of Photovoltaic Waste Boosts Circular Economy. [online report]. Available at: https://cordis.europa.eu/article/id/240250-recycling-of-photovoltaic-waste-boosts-circular-economy. [Accessed on 30/01/2021].
• Desrosiers A and Trent M (2020). Coronavirus: How Hong Kong’s Dramatic Drop in Recycling Sets a Dangerous New Norm. Hong Kong Free Press [online]. Available at: https://hongkongfp.com/2020/06/21/coronavirus-how-hong-kongs-dramatic-drop-in-recycling-sets-a-dangerous-new-norm/. [Accessed on 30/01/2021].
• Desrosiers A (2020). HK landfills are Supposed to be Full in 2020. What’s the Government’s Plan? [online]. Sustainable Asia. Available at: https://sustainableasia.co/feature/hk-landfills-are-supposed-to-be-full-in-2020-whats-the-government-s-plan. [Accessed on 30/01/2021].
• Energy Pyrolysis Ltd (2013). Carbon Black. [online] Available at: http://www.energy-pyrolysis.org/products/carbon-black/. [Accessed on 18/03/2021].
• Environmental Protection Department (2005). Problems and Solutions. [online]. Available at: https://www.epd.gov.hk/epd/english/environmentinhk/waste/prob_solutions/landfill.html. [Accessed on: 30/01/2021].
• Global Carbon Project (2020). Global Carbon Budget. [online]. Available at: https://www.globalcarbonproject.org/carbonbudget/20/infographics.htm. [Accessed on 30/01/2021].
• Green Tech Fund (2020). About the Fund. [online]. Available at: https://www.gtf.gov.hk/en/about_the_fund/about_the_fund.html. [Accessed on 30/01/2021].
• HKIE (2021). Green Technology Opportunities Amidst the Plastic and Waste Problem during the Pandemic. Webinars for Innovation Expo 2021. Webinar Series March 2021 [YouTube video]. Available at: https://www.youtube.com/watch?v=33RA3ex2ihs&ab_channel=HKIEChannel. [Accessed on 18/03/2021].
• Ho S (2019). Hong Kong Facing Monumental Waste Crisis With Disposal Rates Highest Ever [online]. Green Queen. Available at: https://www.greenqueen.com.hk/hong-kong-facing-monumental-waste-crisis-with-disposal-rates-highest-ever/. [Accessed on 30/01/2021].
• Ho S (2020). New Fund to Support Hong Kong Recyclers During Coronavirus Pandemic [online]. Green Queen. Available at: https://www.greenqueen.com.hk/new-fund-to-support-hong-kong-recyclers-during-coronavirus-pandemic/. [Accessed on 30/01/2021].
• Kao E (2019). Sort Your Rubbish Properly, Hong Kong’s Glass Recyclers Tell Residents Amid Supply and Waste Management Woes. South China Morning Post. [online]. Available at: https://www.scmp.com/news/hong-kong/health-environment/article/2188405/sort-your-rubbish-properly-hong-kongs-glass. [Accessed on 30/01/2021].
• Low Z (2020). Hong Kong NGO Taking Action to Keep City’s Plastic Waste under Control by Reaching Areas Recycling Firms Ignore. South China Morning Post. [online]. Available at: https://www.scmp.com/news/hong-kong/health-environment/article/3112753/hong-kong-ngo-taking-action-keep-citys-plastic. [Accessed on 30/01/2021].
• Low Z (2019). Environmental Group Warns of ‘Dark Period’ as Hong Kong Waste Hits Highest Level Since 1991. South China Morning Post. [online]. Available at: https://www.scmp.com/news/hong-kong/health-environment/article/3039304/environmental-group-warns-dark-period-hong-kong. [Accessed on 30/01/2021].
• Oceans Asia (2020). COVID-19 Facemasks & Marine Plastic Pollution. [online]. Available at https://oceansasia.org/covid-19-facemasks/. [Accessed on: 30/01/2021].
• Owusu P and Sarkodie S (2020). Impact of COVID-19 pandemic on waste management. Environment, Development and Sustainability. [online]. p3. Available at: https://doi.org/10.1007/s10668-020-00956-y. [Accessed on 30/01/2021] .
• Recycling Fund (2020). Guidance Notes: A Theme-based Scheme on Supporting Residential Buildings in Adopting Smart Bins Technology in Food Waste Collection and Recycling. [online report]. Available at: https://www.recyclingfund.hk/images/app_isp/solicitation_theme_e.pdf [Accessed on 30/01/2021].
• Recycling Today (2018). Hong Kong Company’s System Uses Frictional Heat to Recycle Thermoplastics [online]. Available at: https://www.recyclingtoday.com/article/hong-kong-companys-system-uses-frictional-heat-to-recycle-thermoplastics/. [Accessed on 30/01/2021].
• Schmidt J (2019). SunCrafter: Upcycling Scrap Solar Panels Into Sturdy Offgrid Power Solutions [online]. Available at: https://en.reset.org/blog/suncrafter-upcycling-scrap-solar-panels-sturdy-offgrid-power-solutions-08302019. [Accessed on: 30/01/2021].
• Simke A (2020). Asia’s Battle Against Plastic Waste [online]. Earth.org. Available at: https://earth.org/asias-battle-against-plastic-waste/. [Accessed on 30/01/2021].
• Solar Power World (2019). Old Solar Panels Get Second Life in Repurposing and Recycling Markets. [online]. Available at https://www.solarpowerworldonline.com/2019/01/old-solar-panels-get-second-life-in-repurposing-and-recycling-markets/#:~:text=In%20addition%20to%20repurposing%2C%20the,stream%20to%20make%20new%20modules. [Accessed on 30/01/2021].
• wasterducation.gov.hk (2018). Green@Community. [online]. Available at https://www.wastereduction.gov.hk/en/community/crn_intro.htm. [Accessed on 19/03/2021]
• wastereducation.gov.hk (2018). Hong Kong 2018 Waste Statistics. Edition 1 [PDF]. Hong Kong Environmental Protection Department, Waste Data & Statistics. Available at: https://www.wastereduction.gov.hk/en/assistancewizard/waste_red_sat.htm. [Accessed on 30/01/2021]
• Waste Management World (2020). TOMRA: New Sorting Technology Can Help Overcome Recycling Disruption from COVID-19 [online]. Available at: https://waste-management-world.com/a/tomra-new-sorting-technology-can-help-overcome-recycling-disruption-from-covid. [Accessed on 30/01/2021].
• weee.gov.hk (2018). WEEE·PARK( WEEE Treatment and Recycling Facility). [online]. Available at: https://weee.gov.hk/page.php?id=3&content=1. [Accessed on 30/01/2021].
April 2021 I Hong Kong Engineer 17
LETTER TO
THE ED
ITOR
Letter to the EditorDear Editor
I am glad to learn about the achievements in the
application of Modular Integrated Construction (MiC)
from the Cover Story in Hong Kong Engineer of January
2021 (Volume 49). However, in my opinion, the concept
of Modular Construction has not been presented in a
balanced manner.
The article has used the terms “MiC” and “Modular
Construction” interchangeably, creating the impression
that both are the same. In fact that is not the case. Modular
Construction represents a family of solutions that embraces
off-site manufacturing and on-site assembly. On the other
hand, MiC, which mandates the use of freestanding
volumetric modules manufactured off-site according to the
definition of the Development Bureau, is only one member
of the family.
According to a report titled “Modular Construction: From
projects to products” published by McKinsey & Company
in June 2019, Modular Construction “involves producing
standardised components of a structure in an off-site
factory, then assembling on site.” These components
can be three-dimensional (3D) volumetric units or
two-dimensional (2D) panels. While 3D volumetric solutions
involving fully-fitted units (ie MiC) maximise productivity
benefits, 2D panelised solutions (an analogy is the assembly
of Ikea furniture) optimise logistics in transport and storage.
There are advantages and limitations associated with
each approach. The report concludes that the specific
requirements, circumstances and constraints of a project
determine whether a 3D volumetric solution, a 2D panelised
solution, or a hybrid solution offers the best option. There is
no one-size-fits-all solution.
Today, Modular Construction represents a forest of
opportunities to the building industry. MiC is probably the
most eye-catching tree in this forest. While driving wider
application of MiC in Hong Kong, it is important for our
industry leaders to keep an open mind and not let the focus
on a big tree block the view of the lush forest behind it.
Yours truly
Ir Alan H L MAN
Fellow
Dear Editor,
I am grateful to you for forwarding the views of Ir Alan Man
about the Cover Story published in the January 2021 issue of
Hong Kong Engineer which is entitled “Modular Integrated
Construction for High-rise Buildings: Measured Benefits”
(DEVB et al., 2021), and would like to provide my responses
hereinafter.
First of all, let us get the concept fundamentally correct.
MiC was developed in Hong Kong building on the Modular
Construction (MC) approach which has been widely
adopted globally, while MiC emphasises the integration of
advanced manufacturing technologies into the
re-engineered building and construction processes
particularly for high-rise developments in high-density
contexts. As mentioned in the Cover Story, the concept of
MiC was defined by Pan and Hon (2018) as:
“a game-changing disruptively-innovative approach
to transforming fragmented site-based construction
of buildings and facilities into integrated value-driven
production and assembly of pre-finished modules with the
opportunity to realise enhanced quality, productivity, safety
and sustainability.”
The Development Bureau Technical Circular (Works)
No 2/2020 described MiC in a more concrete form as:
“a construction method whereby freestanding volumetric
modules with finishes, fixtures, fittings, furniture and building
services installation, etc manufactured off-site and then
transported to site for assembly.”
MC is the most advanced off-site construction technology
with three-dimensional units that enclose usable space and
are often prefinished. Various terminologies have been used
in different countries and regions for the MC approach,
Response to Ir Alan Man
April 2021 I Hong Kong Engineer18
LETTER TO
THE ED
ITOR
with examples including “modular building” in the UK (Gibb
and Pendlebury, 2006), “permanent modular construction”
in the US (MBI, 2013), “Prefabricated Prefinished Volumetric
Construction (PPVC)” in Singapore (BCA, 2017), and
of course “Modular Integrated Construction (MiC)” in
Hong Kong. There are subtle differences between these
terms, which are explained and illustrated in the Glossary
produced by the Centre for Innovation in Construction
and Infrastructure Development (CICID) of The University
of Hong Kong (HKU) (Pan et al., 2020). However, such
differences should not concern the adopters of MiC in
Hong Kong or MC in the global context. Nevertheless, there
is a fundamental difference between MiC or MC and
off-site construction. The latter is a term literally developed
to contrast with on-site construction, and covers a wide
spectrum of off-site technologies including MC. There
exist in market at least hundreds of off-site technologies,
components and systems manufactured and supplied by
thousands of factories. Prof Alistair Gibb and his team from
Loughborough University, UK developed a level system to
have categorised the many off-site technologies at four
levels (Gibb 1999; Gibb and Pendlebury, 2006), ie:
• Level 1 “component subassembly” (eg prefabricated
lintels),
• Level 2 “non-volumetric preassembly” (eg precast wall
panels),
• Level 3 “volumetric preassembly” (eg bathroom pods),
and
• Level 4 “complete buildings”.
For details one may refer to Prof Gibb’s seminal monograph
entitled “Off-site Fabrication: Prefabrication, Pre-assembly
and Modularisation” published in 1999 and Loughborough
University’s off-site glossary of terms published in 2006
(Gibb and Pendlebury, 2006). One may further refer to
the Glossary of MiC produced by the CICID of HKU in 2020
(Pan et al., 2020), which expands the off-site construction
terms to also cover MiC as well as smart construction in line
with the global trend of the construction industry towards
modularisation and digitalisation.
However, despite the well-established body of knowledge
of MiC, MC and off-site construction, there still exist
misunderstanding of individuals and organisations about
the terms. Ir Man brought forward the report published by
McKinsey & Company (2019). Although the term “modular
construction” is used in the title of that report with no reason
provided perhaps as an eye-catcher, many terms are
used in the report interchangeably with no definition or
description provided. The terms used in that report include:
“modular construction” (title and throughout), “modular
(or prefabricated) construction” (Page 1), “prefabricated
housing” (Page 1), “pre-fabricated components” (Page 5),
“prefabricated buildings” (Page 17), “industrial
construction” (Page 18), “offsite manufacturing” (Page 19),
“offsite construction” (Page 22), “offsite-produced
residential buildings” (Page 23), “modular prefabrication”
(Page 23), etc. In addition to the inconsistent and somehow
improper use of these terms, that report also wrongly states
“Terms such as offsite construction, prefabrication, and
modular construction are used interchangeably” (Page 7)
which should be corrected. What is illustrated in the figure
(Exhibit 2, Page 8) actually shows the spectrum of off-site
construction technologies, but not “modular construction”
incorrectly put in the figure caption. The body of literature
of off-site and MC should have been properly accessed to
avoid misunderstanding.
Next comes my response to the metaphors of “tree” and
“forest” given by Ir Man, although such response might be
considered no longer needed after the misunderstanding
becomes self-evident and demystified. Hong Kong has
witnessed a general high-speed development mode in
the past half a century. That was partly attributed to the
development and application of many innovations and
technologies such as precast concrete technology for
public housing development. This technology undoubtedly
contributed significantly to the housing supply in the city,
enjoying the cheap labour and policy support in the then
Pearl River Delta now called the Greater Bay Area (GBA).
Nevertheless, sacrifices came along such as the loss or at
least insufficient retention of intellectual properties affiliated
with the reallocated manufacturing capabilities outside
Hong Kong and the lack of procurement bargaining power
due to the increasingly rigid supply chains, which are
coupled with the threats of the rising labour cost in the GBA
and the shifting focus of the manufacturing industry in the
GBA towards the domestic market driven by the national
“dual circulation” strategy. In particular, off-site construction
has been a national policy in recent years, inspiring a large
number of innovations and technologies for not only
off-site itself but also green and digital, widely perceived
to be leaving the counterpart practices in Hong Kong
well behind. MiC is a disruptive innovation developed in
Hong Kong and, despite its introduction only since 2017,
has already demonstrated its rich benefits for and vigorous
life in Hong Kong development. As of February 2021,
there had been 31 MiC systems granted with the Buildings
Department’s in-principle acceptance and dozens of MiC
projects completed or under planning, design or delivery
in Hong Kong. This is a competitive edge that the Hong
April 2021 I Hong Kong Engineer 19
LETTER TO
THE ED
ITOR
Kong construction industry should firmly grasp and fully
capitalise on. Nevertheless, it is wise not to overstate MiC as a
panacea, now or ever. Different types of off-site construction
technologies at the four levels listed above have their own
merits and applicability, eg for buildings and infrastructures.
This is further elaborated below.
At the HKIE Building Division Annual Seminar on 8 April 2019
I had an opportunity to explain the relation between MiC
and off-site construction, eg that MiC is the highest level of
the off-site construction spectrum, hence game-changing
and disruptive rather than incremental (Pan, 2019). MiC
should be promoted to spearhead the innovation and
technology breakthrough and diffusion in Hong Kong
construction. Shortly after that on 28 May 2019, the
CICID of HKU launched the MiC Strategy Paper entitled
“Modularisation for Modernisation: A Strategy Paper
Rethinking Hong Kong Construction”, in which we defined
the three words of MiC as:
“The term ‘modular’ is defined herein as the process of
modularising fragmented site-based construction elements,
components and facilities to integrated prefinished modules
to best suit value-driven production and assembly, and
should not be simply understood as 3D volumetric modules
per se.
The term ‘integrated’ is defined herein as the process
of integrating different construction activities and
players in the vertical design and supply chains and of
integrating various functions and stakeholders in the lateral
institutional settings. The integrated process should reflect
the progressive approach to promoting MiC in various
construction sectors such as hostel, hotel and housing
in an appropriate roadmap to address their strengths,
weaknesses, opportunities and challenges. The integrated
process should also avoid regarding MiC as a technical
approach per se, but embrace it within the legislative,
economic, social, and technological contexts.
The term ‘construction’ is defined herein as the life cycle
based whole process covering planning, design, production,
construction, facility management, but not site construction
per se, so as to allow pre-site virtual building engaging BIM for
mitigated risks and post-site smart feedback engaging IoT for
enhanced accountability.” (Pan et al., 2019, Page 23)
With the definitions set forth above, the MiC approach
should easily find its solid ground in infrastructures too, and
open up new opportunities for various off-site construction
technologies.
Hong Kong construction has surely rich strengths but also
clear weaknesses, and golden opportunities but also
alarming threats, in the face of the changing climate of
the city itself, the GBA and globally. What is perceived as
“the lush forest” in Ir Man’s views might become a barren
land - not the “barren rock with hardly a house upon it”
remarked in the colonial history - but one with little inspiring
innovation which would certainly mismatch the highly
ranked infrastructure and development of the city. Thus,
here comes a golden time for us to fully embrace innovation
and technology spearheaded by MiC, and probably the
only time.
Last but not the least, I would like to reiterate the “MiC
Innovating Higher” model that covers the four themes of
“higher-rise, higher-density, higher-tech, and higher-co-
creation” for the future MiC development, which the HKIE
Building Division offered me to present at its Annual Seminar
in 2019. This model became the theme of the International
Conference on MiC organised on 27 August 2019 and
honoured by the Chief Executive of the HKSAR. It is good to
“keep an open mind” but only when there is yet any focal
point. However, clearly now we have got one, and needed
is MiC to spearhead at full pace.
Ir Professor Wei PAN
Executive Director
Centre for Innovation in Construction and Infrastructure
Department of Civil Engineering
The University of Hong Kong
References • BCA (2017). Prefabricated Prefinished Volumetric Construction
(PPVC) Guidebook. Building and Construction Authority (BCA), Singapore.
• DEVB, ArchSD, HKSTP and HKU CICID (2021). Modular integrated construction for high-rise buildings: measured benefits. Hong Kong Engineer, Vol 49, Jan 2021, pp.10-17.
• Gibb, A. G. F. (1999). Off-Site Fabrication: prefabrication, preassembly, and modularisation. Whittles Publishing.
• Gibb, A. G. F. and Pendlebury, M.C. (2006). Glossary of Terms. Buildoffsite, London.
• MBI (2013). Permanent Modular Construction 2013 Annual Report. Modular Building Institute (MBI).
• McKinsey & Company (2019). Modular construction: From projects to products. McKinsey & Company: Capital Projects & Infrastructure.
• Pan, W. (2019). Modular Integrated Construction: Innovating Higher. Proceedings of HKIE Building Division 18th Annual Seminar, 8 April 2019, Hong Kong.
• Pan, W. and Hon, C. K. (2018). Modular Integrated Construction for High-rise Buildings. Proceedings of The Institute of Civil Engineers - Municipal Engineer, DOI: 10.1680/jmuen.18.00028.
• Pan, W., Yang, Y., Zhang, Z. and Chan, S. (2019). Modularisation for Modernisation: A Strategy Paper Rethinking Hong Kong Construction. CICID, The University of Hong Kong, Hong Kong. https://www.miclab.hk/mfm.
• Pan, W., Zhang, Z. and Yang, Y. (2020). A Glossary of Modular Integrated Construction. The University of Hong Kong, Hong Kong. ISBN 978-962-8014-27-9. http://hdl.handle.net/10722/297012.
April 2021 I Hong Kong Engineer20
Climate Change Corner
This article is contributed by Ir Billy Cheung with the coordination of the Environmental Division.
Development of green hydrogen: The key to viable carbon-free economy
By Ir Billy CHEUNG
People were certainly haunted by the explosive hydrogen image of the Hindenburg disaster in 1937. Since then, use of hydrogen (based on fossil fuels, steam methane reformation or gasifi cation of coal or lignite) had been confi ned to industrial feedstock. However, green hydrogen produced by renewables via electrolysis and water molecules splitting is now emerging as a viable green fuel globally.
In accordance with the Paris Agreement, the global economy must be fully scaled up to green technology to achieve net zero carbon emission by 2050. In this regard, migration from a hydrocarbon-based energy to a green hydrogen economy is crucial. Many countries in Europe, Asia and North America have recently issued green hydrogen roadmaps and strategies as well as commitment to broaden investment into green hydrogen solutions.
On the other hand, the decline of solar and wind energy costs (the global Levelised Cost of Electricity for wind and solar has been reduced by 0.35 - 0.39 HK$/kWh from 2009 to 2017, representing 67% - 86% reduction) with associated advantages, has signifi cantly boosted green hydrogen production which requires a massive expansion of
renewable generation to power the electrolysis plants that split water into hydrogen and oxygen. The production of green hydrogen also helps to solve the intermittency issue that plagues wind and solar power, with effi cient storage.
Moreover, green hydrogen and fuel cell (reversing electrolysis process) technologies have been signifi cantly upgraded in terms of effi ciency, durability, reliability, and affordability since the last fuel cell boom in the early 2000s. As such, green hydrogen is taking off around the globe. Global transition towards electric mobility solutions has also paved way for adoption of green hydrogen to provide solutions for long-range zero-emission applications. While wind and solar energy can provide electricity for buildings and vehicles, green hydrogen could be an ideal power source for energy-intensive industries including hard-to-electrify sectors, long-haul trucking, aviation and heavy manufacturing.
In Hong Kong, the Chief Executive announced the objective of carbon neutrality by 2050 during the Policy Address in November 2020. In the current context of regional green fi nance and investment momentum, developing green hydrogen is a great opportunity and the best choice for a carbon-free economy in Hong Kong. Therefore, the Government, in concerted action with stakeholders, needs to urgently formulate green hydrogen strategy. This should include wider use of renewables on many outlying islands and incentives for commercial electrolyser fuel cell products.
C
M
Y
CM
MY
CY
CMY
K
VTC-IVE_Prn_Ad_2021_Apr_03_OL.pdf 1 22/3/2021 4:39 PM
Notice: The H
KIE does not pre-approve any CPD activities/courses. In regard to the academ
ic requirements for m
embership of the H
KIE, please refer to the accredited programm
es listed in the HKIE w
ebsite.
“Engineers ofOur Next Generation”Competition
「未來工程師」比賽
截止報名日期延至 SUBMISSION DEADLINE EXTENDED TO
23 April 20212021年4月23日提交作品時間以主辦機構伺服器顯示時間作準Time of submission is taken according to theOrganiser's server record
全港小學學生Primary school students in Hong Kong(a) 個人 Individual(b) 組合 (最多3人為一組) Group (maximum 3 students in a group)
每組設冠軍︑亞軍︑季軍及最佳創意獎各1名A Champion, 1st Runner-up, 2nd Runner-up andCreativity Award for each category
得獎者將有機會獲頒獎座︑獎狀及現金獎The prize includes a trophy, a certificate and cash prize
短片拍攝比賽詳情及細則請參閱香港工程師學會網頁Please visit the HKIE website for more details of the video shooting competition
獲獎作品將有機會於香港工程師學會創科博覽中展出︐並於學會資訊平台刊登︐詳情有待公布The award-winning entries will be displayed at theHKIE Innovation Expo and published on various HKIE communication platforms. Details to be announced
香港工程師學會傳訊統籌部Corporate Communications SectionThe Hong Kong Institution of Engineers
[email protected] 4446
參賽組別 CATEGORIES
查詢 ENQUIRIES
獎項 AWARDS AND PRIZES
INSTITU
TION
& D
IVISIO
N A
CTIV
ITIES
April 2021 I Hong Kong Engineer 23
General
Congratulations to the following young engineers who are
selected for the HKIE Young Engineers Arthur & Louise May
Memorial Scholarship (Cycle 2020/21):
• Ir Wong Kwan Lok Eugene
• Mr Zhou Shanjing Alexander
The composition of the Panel of Judges for the Scholarship
(Cycle 2020/21) and Work Group of the HKIE Young Engineers
Arthur & Louise May Memorial Scholarship are as follows:
Panel of Judges:
Chairman:
• Ir Prof P L Yuen, President
Members:
• Ir Dr Barry Lee Chi Hong, Chairman of the Learned Society
Board
• Ir Raymond Chan Kin Sek, Past President
• Ir Prof Choy Kin Kuen, Past President
• Ir Dr Joseph Lai Hung Kit, Associate Professor, Department
of Building Services Engineering, PolyU
The HKIE Young Engineers Arthur & Louise May Memorial Scholarship (Cycle 2020/21)
Work Group of the HKIE Young Engineers Arthur & Louise
May Memorial Scholarship:
Chairman:
• Ir Ringo Yu Shek Man
Members:
• Ir Dr Barry Lee Chi Hong, Chairman of the Learned Society
Board
• Ir Raymond Chan Kin Sek
• Ir Patrick Cheung Yuen Fong
• Ir Ip Tat Yan
• Ir Dr Anthony Lo Chi Wah
• Ir Raymond Poon Kwok Ying
The Scholarship aims to encourage and support young
engineers to further their education abroad for the benefit of
the engineering profession and the local community at large.
Young members who would like to pursue non-degree
granting courses (between one week to six months),
post-graduate degree granting courses or attend professional
development workshops (not less than one week) organised
by government departments, reputable public and
professional bodies outside Hong Kong are welcome to apply
for the Scholarship. The next cycle of the Scholarship will open
for application in the 3rd quarter of 2021.
INSTITU
TION
& D
IVISIO
N A
CTIV
ITIES
April 2021 I Hong Kong Engineer24
為讓會員更全面地把握粵港澳大灣區發展帶來的機遇,學會於2021年2月4日聯同立法會工程界別盧偉國議員、博士、工程師及特區政府發展局舉辦了「香港工程建設專業機構及人士大灣區執業備案辦法簡介會」,講解相關措施的詳情及介紹重點工程項目。在發展局的協助下,簡介會有幸邀請到廣東省住房和城鄉建設廳建築市場監管處古榮清處長、二級調研員、深圳市前海深港現代服務業合作區管理局孫毅副處長、珠海經濟特區橫琴新區建設環保局豐衛華科長,以及發展局首席助理秘書長(工務)何英傑工程師擔任講者。
是次簡介會吸引數以百計學會會員和社會人士參加。簡介會上,講者分別介紹廣東省大灣區、前海和橫琴各地就香港工程建設專業機
香港工程建設專業機構及人士大灣區執業備案辦法簡介會構及人士的備案辦法和實施現況,以及國家在大灣區內各城市以相互配合、互補不足為重心的發展策略;並讓參加者透過認識各城市的重點工程項目,結合自身專業經驗和發展方向,探索如何把握機會,將業務及事業拓展到內地市場,分享國內基建和發展的成果。
簡介會最後設有問答環節,參加者反應十分踴躍,提問範圍涵蓋申請備案的注意事項、專業資格互認的可行性、備案的要求和未來延展至其他專業的可能性等。講者的即場回應相信可以為參加者說明了不少關於備案辦法的誤區,亦為是次簡介會劃上完滿句號。
左起:盧偉國議員、源栢樑會長及陳芯舟小姐(主持)
廣東省住房和城鄉建設廳建築市場監管處古榮清處長、二級調研員
學會會長源栢樑教授、工程師 盧偉國議員、博士、工程師 發展局首席助理秘書長(工務)何英傑工程師(右)及代表
深圳市前海深港現代服務業合作區管理局孫毅副處長(中)及代表 珠海經濟特區橫琴新區建設環保局豐衛華科長(左)及代表
「香港工程建設專業機構及人士大灣區執業備案辦法簡介會」的講者及嘉賓:
INSTITU
TION
& D
IVISIO
N A
CTIV
ITIES
April 2021 I Hong Kong Engineer 25
The Institution continued to arrange webinars to facilitate
the development of members’ innovation skills under the
Enginpreneurs Hub. This was one of the initiatives of the
Institution under the Presidential Theme of Session 2020/2021,
“Believing is seeing – Innovation for transformation” (相信‧可
‧看見 — 創新‧成‧蛻變).
In February 2021, two webinars were held to introduce
the innovation methodologies and patenting issues in
the Mainland respectively to members. Both were
well-received with enthusiastic responses from participants.
On 5 February 2021, the webinar entitled “In Search of
Excellence Through Innovation” was presented by Ir Dr Victor
Lo, Founding Director and President of the Institute of
Systematic Innovation, Hong Kong. The webinar offered an
essential introduction of what is innovation. Ir Dr Lo provided
ample examples illustrating the creative uses of innovation in
our daily lives and explained the innovation methodologies in
detail.
He also talked on the “ISO 56002:2019”, which is the
world’s first guiding international standard for innovation
management system. To show support to the Enginpreneurs
Hub and encourage participants to continue on their journeys
to innovation, Ir Dr Lo generously contributed 100 copies of
his book《創新管理系統 ISO 56002 天書》for distribution to
participants who offered feedback on the inspirations they
had gained for innovation in their everyday or work life from
the webinar.
The other webinar was held on 19 February 2021. The speaker,
Mr Yan Xiwen (顏希文), Deputy General Manager of Scihead
IP Law Firm, gave a presentation on the “Practical Issues on
Patent Application in the Mainland (中國專利申請實務專題講
座)” to participants. Mr Yan introduced the Patent Law of the
People’s Republic of China and explained different types of
patents - invention patents, utility model patents and design
patents, with real-life cases.
He also provided details of various steps of the patent
application process in the Mainland. The participants raised
questions enthusiastically during the question-and-answer
session. Mr Yan responded to the questions by offering his
worthy experience as an intellectual property expert to clear
up any doubts on applying for a patent of an invention.
The Enginpreneurs Hub webinar - February series
President Ir Prof P L Yuen (R) presenting a certificate of appreciation to the speaker Ir Dr Victor Lo (L)
After the webinar held on 5 Feb 2021 (L to R): Ir Louis Yiu (Moderator), President Ir Prof P L Yuen, Ir Dr Victor Lo and Ir Dr Ritz Lau
President Ir Prof P L Yuen and Ir Dr Ritz Lau (Moderator) (L) welcomed the speaker Mr Yan Xiwen (R)
INSTITU
TION
& D
IVISIO
N A
CTIV
ITIES
April 2021 I Hong Kong Engineer26
The HKIE Innovation Expo 2021 is an initiative of the Institution
under the Presidential Theme of Session 2020/2021, “Believing
is seeing - Innovation for transformation” (相信‧可‧看見 —
創新‧成‧蛻變), with the aims of strengthening the network
between the engineering industry and stakeholders of the
Innovation and Technology (I&T) ecosystem within the
region as well as around the globe; and revitalising the
innovation process and generating opportunities through the
collaborations between the engineering innovators, potential
investors and stakeholders.
As the prelude to the HKIE Innovation Expo 2021, a series
of webinars would be organised under the Expo starting
from March 2021. We were pleased to invite a veteran
environmentalist and energy conservation consultant, Dr Yau
Wing-kwong, JP, Chief Executive of Environmental Association,
to deliver the first webinar on “green” waste management
innovation.
Coincidently, the Institution was invited by the World
Federation of Engineering Organisation (WFEO) to celebrate
the World Engineering Day (WED), ie 4th March in each year
since 2020, coordinated by the United Nations Educational,
Scientific and Cultural Organisation (UNESCO). As to support
the WED, the webinar by Dr Yau had been simultaneously
submitted to WFEO by the Institution for registration as one of
the celebration events of the WED.
Held on 5 March 2021, the webinar, entitled “Green
technology opportunities amidst the plastic and waste
problem during the pandemic”, was presented by Dr Yau,
which was well received with enthusiastic responses from
participants across different boundaries including Australia,
Macau SAR, Singapore, Taiwan, and the United States.
Dr Yau started the webinar by indicating the rising
consumption of petroleum products during the pandemic
and the resulting waste disposal problem. He then expatiated
on the countermeasures to alleviate the landfill saturation
in Hong Kong including innovative waste collection
and separation methods with the goal to minimise the
transportation risk involving medical wastes as well as to
reduce the logistics cost by compressing the municipal waste
volume in local waste treatment plants.
Webinars for Innovation Expo 2021 (March series) - Green technology opportunities amidst the plastic and waste problem during the pandemic
An exhaustive coverage on recycling opportunities
characterised by the innovative green technology, such
as automation, was also offered by Dr Yau to illustrate the
achievable formation of a circular economy upheld by
the elements of recycling and upcycling as well as the
adaptation to the new-normal lifestyle for optimising our
consumption pattern and efforts on waste reduction and
recycling. The discussion allowed us to better perceive the
prospect of green technology development and the trend
of environmental protection policy such as the adoption of
polluter-pays principle and the use of smart green technology
in Hong Kong.
Presentation of a certificate of appreciation to the speaker Dr Yau Wing-kwong, JP by President Ir Prof P L Yuen(L to R): President Ir Prof P L Yuen, Dr Yau Wing-kwong, JP, Ms Shelton Cheung (Moderator)
The webinar held on 5 March 2021
INSTITU
TION
& D
IVISIO
N A
CTIV
ITIES
April 2021 I Hong Kong Engineer 27
Digital tools, such as Building Information Modelling (BIM)
technology, were used to increase efficiency, productivity
and resilience throughout the construction process for
InnoCell project. This allowed all MEP pipework and
equipment to be well coordinated with the structural
framework and internal fixtures on the computer model and
enabled seamless assembly by the contractor and enhanced
accuracy for the coordination of the services.
The structural construction of the 17-storey smart-living
dormitory commenced in August 2019 and was completed
with obtaining OP by October 2020. The project delivery time
was about 14 months, which is at least six months faster. There
was also a combined construction of in-situ core walls and
slabs, and steel-structured MiC modules. The building was
assembled from 418 modules in three-day construction cycles
and provides five types of room.
The HKIE Building Services Division and BSOMES co-organised
an online technical webinar on the captioned topic on
23 February 2021.
Ir Johnson Sze, E&M Engineer of Electrical and Mechanical
Services Department, and Ir K F Yee, Chairman of the
BS Division acted as guest speakers for the webinar. The webinar
received overwhelming response with over 1,100 participants.
Building
Building Services
HKIE Building Division site visit - the InnoCell of HKSTPBy Mr Jacky CHIU
Major changes of the CoP for the Electricity (Wiring) Regulations 2020 Edition and practical implementationsBy Ir Sally LEUNG and Ms Esther MAK
The new Code of Practice (CoP) for the Electricity (Wiring)
Regulations 2020 Edition was published at the end of 2020
with substantial changes to the previous edition. During the
webinar, Ir Sze first highlighted the major changes of the CoP
between the 2015 and 2020 editions, and explained the
reasons for the changes and concerns about those issues
from different professionals in the Working Group Members.
The audience showed keen interest in the development of
green technology and environmental protection in Hong
Kong during the question-and-answer session. Dr Yau went
into details of Reverse Vending Machine (RVM) about
its trial implementation, and the current status of waste
management and green technology development in Hong
Kong in contrast to the Asian, American, and European
counterparts.
Group Photo of Participants on the technical visit to InnoCell
For densely populated cities like Hong Kong, the successful
completion of InnoCell project is expected to pave the way
for the use of MiC in wider applications. This will provide an
effective way to create living and working spaces much
quicker, more economically and in a sustainable manner.
INSTITU
TION
& D
IVISIO
N A
CTIV
ITIES
April 2021 I Hong Kong Engineer28
The technical seminar on the captioned topic was held on the
evening of 27 January 2021 by the HKIE Civil Division. The two
invited speakers were Ir Carmen Chu, Director of the Transport
Team in Arup with over 20 years of experience in a wide
spectrum of transportation studies, and Ms Lian Duan, Senior
Transportation Engineer in Arup with a broad experience in
mobility innovations across multi-modal transportation.
The webinar was conducted live on Zoom and was accessible
to both HKIE and non-HKIE members. The webinar was divided
into three parts which consisted of presentations respectively
from Ir Chu and Ms Duan followed by a question-and-answer
session towards the end.
Ir Chu kicked off the first part of the presentation by describing
today’s emerging mobility trends. She pointed out that traffic
jams have been a problem for the entire world. Supporting
data shows that commuters spend an average of 100 hours
a year stuck in traffic. As urban mobility is changing rapidly,
Civil
Technical seminar on emerging mobility trends impacting Hong KongBy Mr Jimmy FUNG
it is simply not feasible to keep constructing new roads and
highways endlessly to cope with the increasing demand.
Therefore, she suggested that there will be a need for
convergence of key technologies as well as a change in
social attitudes. She stated that some global mega trends
such as increasing automation, digital connectivity and the
shared economy could potentially contribute to an intelligent
mobility ecosystem.
Speakers and OC members
Several topics including the safety precautions for work
on low voltage installation (Code 4G), provisions for Arc
Fault Detection Devices (AFDDs) (Code 6B(1)), final circuit
requirements for Universal Serial Bus (USB) outlets (Code
6F), renewable energy power installations (Code 26P),
charging facilities for electrical vehicles (Code 26S) and
Modular Integrated Construction (MiC) (Code 26T) etc were
presented.
Ir Sze also introduced Module 3 of the Continuing Professional
Development Scheme for Registered Electrical Worker (REW)
on a voluntary basis. After that, Ir Yee further explained the
major changes of the latest CoP through practical approach
and implementation.
Ir Yee highlighted the step-by-step working procedures for
electrical installation work before and inside false ceilings
with a tailor-made Task-specific Risk Assessment Checklist and
different scenarios. He also introduced the importance of
AFDDs, the particular requirements for the installation of USB
outlets, the reasons behind the changes in Earth Fault Loop
Impendence, and update on the change of conduit factors
etc.
After the presentation, a question-and-answer session was
chaired by Mr Keith Chung. Participants actively interacted
in the fruitful discussions. On behalf of the Organising
Committee, we would like to express our sincere gratitude to
Ir Sze and Ir Yee for their support and informative presentation
which made the webinar a very successful one.
Extracts from the presentation on Zoom
INSTITU
TION
& D
IVISIO
N A
CTIV
ITIES
April 2021 I Hong Kong Engineer 29
Ir Chu further elaborated on the concept of smart mobility,
and naming the strategies which are being proposed for ITS
Management in Hong Kong. She introduced initiatives like the
free-flow tolling system in 2024, real-time adaptive traffic signal
system and crowd management system at Kai Tak Sports Park
to visualise how they could be realistically implemented in the
near future.
She also discussed strategies for public transport including
Environmentally Friendly Linkage System (ELFS) and walking
aspects as one of the most recent technologies such as smart
payment street parking meters. She concluded her part with
some key considerations for the future of mobility.
Ms Lian highlighted how new mobility in cities could be
realised as she took the audience through the basics of the
levels of vehicle autonomy. Autonomous and electric vehicles
are key players in the transformation of mobility since they
could bring several benefits to cities.
She emphasised that although the new mobility system is
mainly driven by technologies, new technologies could be
the solutions themselves. There should be an integrated and
user-centric design approach when it comes to adopting
technologies so that they satisfy the needs of the public in
a sustainable manner. Ms Lian then finished off her part of the
presentation with the provision of data insights and revenue
generation opportunities for new cities.
A technical seminar on the captioned topic was co-organised
by Department of Civil and Environmental Engineering of
The Hong Kong Polytechnic University (PolyU), the HKIE Civil
Division and HKIHT on the evening of 3 February 2021.
Prof Yuhong Wang from the Department of Civil and
Environmental Engineering of the PolyU was invited to be
the speaker for the sharing session. Prof Wang’s current main
research projects and interests lie in future urban green and
intelligent infrastructures that aim to make our cities cleaner,
smarter, more resilient, and more environmentally friendly.
He is currently leading two major research projects in these
areas, one of which is the development of smart pavement
systems. The seminar was conducted live on Zoom and was
accessible to the public. The webinar consisted of two parts:
the presentation from Prof Wang and a subsequent question-
and-answer session.
Prof Wang started his presentation by introducing his research
team and acknowledging the sponsors of his research. He
pointed out that pavements and roofs constitute over 60%
of urban surfaces. He then shared some problems relating to
current urban pavements which include structure durability,
surface durability and the unique constraints on construction
methods in the urban environment.
Prof Wang then moved onto discussing the concept of
smart mobility. He described smart mobility as the first of the
six major development areas that have been identified for
Technical seminar on new prefabricated composite pavement systems for sustainable and smart city developmentBy Jimmy FUNG
Photo of the presentation in Zoom
smart cities that aim to develop more efficient, convenient
and environmentally friendly transport systems by adopting
innovation information and communication technologies.
He proposed a solution to the problems of urban pavements
which would adopt prefabricated structures built on the
principles of automatic prefabrication and construction.
Prof Wang also highlighted the key features of the
prefabricated pavement. An integrated porous pavement
system is demonstrated to allow surface water to be diverted
in order to avoid water stagnation. He also listed out the
tests that could be done to ensure the performance and
resistance of the proposed prefabricated pavement.
He concluded the seminar with various future directions and
perspectives which would potentially improve the current
pavement product.
INSTITU
TION
& D
IVISIO
N A
CTIV
ITIES
April 2021 I Hong Kong Engineer30
Electronics
Fire
Seminar on deep learning demystified By Ms Monica LEUNG
Webinar technical talk on science and technology of battery fire safetyBy Ir Angus WONG
On 23 November 2020, the HKIE Electronics Division (EN) was
glad to invite Dr Charles Cheung, Senior Data Scientist and
Deputy Director of the NVIDIA AI Technology Center HK, to
give a webinar titled “Deep Learning Demystified” at the HKIE
Headquarter. More than 100 participants enjoyed insights on
how to apply Artificial Intelligence (AI) in real life applications.
Dr Cheung started the seminar by introducing machine
learning. There are three types of machine learning:
supervised learning, reinforcement learning and unsupervised
learning.
• Supervised learning uses a training set to teach models to
yield the desired output. The goal is to correctly label new
data with a set of labelled training data.
• Reinforcement learning is learning best actions based on
reward or punishment. The system receives feedback for
its actions, and the goal is to perform better actions.
• Unsupervised learning uses machine learning algorithms
to analyse and cluster unlabelled datasets. The goal is to
categorise the observations.
Next, Dr Cheung explained the theory and features of deep
learning. Deep learning is part of machine learning methods
The HKIE Fire Division successfully delivered the first
international webinar on the captioned topic in collaboration
with the HKIE Australia Chapter and the Society of Fire Safety
New South Wales. Professor Guillermo Rein from Imperial
College, London was the guest speaker. Over 270 engineers
joined the event from Hong Kong, Macau, Sydney and
London without geographical boundaries.
Prof Rein and his HazeLab team recently carried out a study,
to collect and analyse the safety challenges faced by Lithium-
ion battery (LIB) industries across sectors and compared them
to the research contributions found in the field.
based on artificial neural networks with representation
learning.
Last but not least, Dr Cheung talked about the application
development of deep learning using the NVIDIA platform.
He illustrated examples of how AI can be applied in different
areas, such as intelligent video analytics, finance, healthcare,
security, and autonomous vehicles.
AI will present new opportunities and capabilities to improve
the human experience. We believe that every company
should be exploring the technology.
Dr Charles Cheung and committee members of the EN Division
Chairlady Ir Dr Fiona Tsui and Event Convenor Ir Gerald Lee with Prof Rein from Imperial College London
INSTITU
TION
& D
IVISIO
N A
CTIV
ITIES
April 2021 I Hong Kong Engineer 31
Logistics & Transportation
Minimising loss from car accidents by applying Big Data Analytics to your vehicle network By Ms Joyce WONG and Ir Carmen CHU
There are around 16,000 traffic accidents occur in Hong Kong
every year. Public buses, public light buses and taxis are the
three most accident-prone vehicle types while the top two
driver contributory factors to traffic accidents are “driving
inattentively” and “driving too close to the vehicle in front”,
according to statistics provided by the Hong Kong Police
Force.
In this webinar Mr Antonio Wong, CEO and Co-founder
of Greensafety Technology Ltd, shared with us how the
implementation of Artificial Intelligence (AI), Big Data
Analytics and Internet of Vehicles (IoV) could offer real-time
warnings and precautions to drivers to avoid accidents, and
also identify potential road safety black spots for reporting to
the government and other road users.
Mr Wong shared with us his experience of working with The
Kowloon Motor Bus Co. (KMB) and other corporations to install
on-board systems and safety measures such as Advanced
Driver Assist System and Distraction Detection System to
provide real-time alerts for drivers at service.
The Advanced Driver Assist System can accurately calculate
the speed of vehicles and the distance to the preceding
objects on the road, using the principles of triangulation
and depth sensing. With the assistance of video analytics,
combined with signals and monitored steering speeds, the
system can activate the alarms (or seat vibration) in the
vehicle to alert the drivers that there is an insufficient safety
distance to the objects ahead and record a 10-second
Through the webinar, Prof Rein raised our awareness of
Lithium- ion battery fire safety and gave the webinar
audience a better understanding of Li-ion fires to encourage
innovation and better solutions.
Mr Antonio Wong, CEO and Co-founder, Greensafety Technology Ltd
LIB is an important technology for the present and future
of energy storage, transport, and consumer electronics.
However, many types of LIB display a tendency to ignite or
release gases. Although statistically rare, LIB fires pose hazards
which are significantly different to other fire hazards in terms
of the initiation route, rate of spread, duration, toxicity, and
suppression.
video with spatial information for further investigation of any
incidents and black spots reporting.
The Distraction Detection System (or called Drowsiness
Monitoring System) can be adopted to detect the level of
alertness of a driver by using image-processing technology
and AI- based facial patterns.
An online platform gathers the fleet performance data
and provides a visual performance dashboard of identified
potential road safety black spots to allow stakeholders to take
preventive measures and actions before accidents occur.
The webinar was organised on 29 January 2021 and attracted
over 110 members. The audience found the webinar fruitful
by learning how the latest technology could safeguard and
enhance road safety.
INSTITU
TION
& D
IVISIO
N A
CTIV
ITIES
April 2021 I Hong Kong Engineer32
Manufacturing, Industrial & Systems
Webinar on the route to Registered Quality Management Engineers By Ir Dr S L MAK
The webinar was jointly organised by the HKIE Manufacturing,
Industrial and Systems (MI) Division and the Control,
Automation and Instrumentation (CA) Division successfully
on 19 November 2020. Three hundred participants joined the
webinar via Zoom.
In the beginning, Ir C S Leung, Chairman of the CA Division,
delivered the opening speech and introduced the three
distinguished speakers to the participants.
Then Ir Dr Tommy Lo, President of the Hong Kong Institution of
Certified Auditors (HKICA), introduced the Mutual Recognition
Agreement (MRA) between the HKICA and the China
Certification and Accreditation Association (CCAA) and
explained how HKIE members with the relevant experience
could apply to become Registered Quality Management
Engineers (QME) and recognised in mainland China.
The second speaker, Mr Chen Yaojin, Deputy President
of Guangdong Product Certification Service Association,
explained the background of QME, which is related with the
Government policy document named “關於深化工程技術人才
職稱制度改革的指導意見” in Guangdong, and introduced the
application procedure. The purposes of QME are to enhance
one’s competitive edge and job opportunities and establish
professional standards in quality management, etc.
The third speaker was Ir Dr Fanny Tang who is Director of
Recognition of Prior Learning (RPL) Assessment Agency
for Testing, Inspection and Certification (TIC) and Assistant
Professor at the Open University of Hong Kong (OUHK). She
talked about the RPL assessment scheme and its background
under HKQF and highlighted that OUHK was the appointed
assessment agency of RPL for TIC industry.
Lastly, Dr Tang briefed the assessment methods including
written tests, interviews, practical assessments and the
combinations that depended on the level of RPL clusters.
Before the end of the webinar, some participants asked when
they could apply for the qualifications and where to get the
latest news about the qualifications. The speakers agreed to
post the information to the HKICA website.
Materials
Technical seminar/webinar on recent progress in modelling of durability and cracking in concrete structures By Ir Dr P L NG and Ir C S LAM
The captioned webinar was organised by the HKIE
Materials (MT) Division on 18 January 2021. The speaker was
Dr Shengjun Zhou of Bell Asset Engineering Pty Ltd from
Australia.
Dr Zhou delivered the technical content in four parts. The
first part was on the deterioration mechanisms of concrete
structures due to reinforcement corrosion. There are four
modes of transport for deleterious media in concrete, namely
absorption, permeation, diffusion, and wicking. The speaker
explained different physical, chemical and electro-chemical
mechanisms of reinforced concrete deterioration, including The speaker Dr Shengjun Zhou (L), Ir Dr P L Ng and Ir C S Lam (R).
INSTITU
TION
& D
IVISIO
N A
CTIV
ITIES
April 2021 I Hong Kong Engineer 33
Mechanical, Marine, Naval Architecture & Chemical
Volunteer service - Partner reading with underprivileged children By Mr Keith LEUNG and Mr Tim CHO
It is said that stories can ignite the imagination and curiosity
of children, which is important. The saying proved to be true
at the storytelling workshop “童心同行伴讀計劃” of the Young
Women Christian Association (YWCA), which was full of
laughter and happiness, held on 30 October 2020 during
a Zoom meeting jointly organised by the Mechanical, Marine,
Naval Architecture and Chemical Committee.
The event started with an interactive presentation on the
duties of an engineer. This deepened the understanding of
both the children and their parents’ and aroused their interest
towards engineering.
Then the committee held a storytelling session (Book: Strange
Tales from Pu Songling). The children were invited to role-play
the characters and narrate the story. The children actively
contributed and presented a very interesting plot. Through
this session, mutual learning between the volunteers and the
children was achieved.
Later, the volunteers were divided into three sub-groups to
play games with the children. As part of the activities, the
volunteers were able to build a harmonious relationship and
team spirit with the children. The event ended with a song
and dance performance by the children.
Despite the online nature of the workshop, both volunteers
and children found the event so satisfying and fruitful that
they didn’t want to say goodbye until the last minute.
The event was very rewarding. Volunteers learned a lot from
the interaction with children. It is hoped that more helping
hands and care could be provided to underprivileged
children.
Hence, you are earnestly invited to join us and share your love
with people in need in the coming activities!
a précis of carbonation which is a key issue in durability
design.
The second part was on the modelling service life in
structural design and assessment. Dr Zhou presented various
approaches to durability design including “Deemed to
Satisfy”, “Avoidance of Deterioration”, “Full Probabilistic
Modelling”, “Partial Factors” and “Partial Probabilistic
Modelling”. With regard to durability modelling, Dr Zhou
introduced the first, second and third generations of
analytical/numerical models for chloride diffusion and
carbonation. He also provided application examples for
service life design and residual life estimation.
The third part was on the effects of cracks on concrete
durability. Dr Zhou discussed various causes of concrete
cracking, the effects of crack opening on chloride diffusion,
carbonation, reinforcement corrosion and service life as
revealed from experimental studies in the literature as well as
project examples in real life, and codified provisions on crack
width limits.
The fourth part was on thermal modelling and crack analysis.
Dr Zhou presented the mechanisms of thermal and shrinkage
crack formation, numerical modelling of temperature
distribution and thermal stresses in concrete structures with
variable thickness, mix proportions, raw materials, placing
temperature, ambient conditions, movement restraints,
formwork/insulation and cooling pipe systems, crack analysis
and control measures, and project examples.
The inspiring seminar and webinar ended with a vibrant
question-and-answer session. On behalf of the MT Division
and all the participants, we would like to thank Dr Zhou for his
informative and impressive presentation.
INSTITU
TION
& D
IVISIO
N A
CTIV
ITIES
April 2021 I Hong Kong Engineer34
Safety Specialist Committee
Seminar on how safety works in two independent lift cars operating in one shaftBy Ir Kevin MAN
The captioned technical seminar was jointly organised by the
Building Services (BS) Division and Safety Specialist Committee
(SSC) successfully on 21 January 2021. Dr Andy Chan, CEO of
South East Asia thyssenkrupp Elevator (HK) Ltd, was invited to
share his experiences on the application of TWIN lifts and their
related safety.
With the challenges of urbanisation and the transformation of
cities into the best places to live, the demand for efficient and
user-friendly people moving solutions are becoming more
important than ever.
The TWIN solution presented by Dr Chan substantially
increases the capacity of vertical transportation in buildings
used to having just single or double deck lift car solutions. The
TWIN solution works even more efficiently for buildings with lots
of inter-floor traffic like hospitals, government buildings, offices
with single tenants or those demand for frequent inter-floor
operations; and so forth.
The emergence of the TWIN solution reminds us and our fellow
engineers that “sky is the limit” for our creativity that may one
day turn into innovations that can benefit the community. Presentation of appreciation certificate to Dr Chan by Chairman of SSC and Chairman of BS Division
安全事務專責委員會與自動化及儀器儀表分部於2021年1月29日晚聯合主辦了《易經與2021年預測視像講座》,有近四百人出席。
主講者是陳寶來工程師 (著名傳媒專欄作家,筆名文相濡),他深入淺出地講解了《易經》的哲學及應用理論,並以過去多年刊登出來的預測與結果作比較,包括失蹤馬航墮機位置、日本311九級大地震、英國脫歐、特朗普敗選和血光之災(染上新型冠狀病毒)、香港港鐵的重大事故(二次出軌事故)、香港實施新法例(國安法)止暴制亂,以及日本安倍晉三因病下台等重大事件。
他再以有關歷史出現同類事件的統計數據為基礎,為今年(截至2022年2月4日止)作出預測,如拜登易有血光之災、世界復甦緩慢、新型冠狀病毒大變種、美國出現分裂、美元逐漸破敗、香港經濟復甦比外圍更慢、好事多磨、大陸會在國際舞台更上一層樓等等。以上
易經與2021年預測視像講座報告By Ir Andrew LIN
安全工程專責事務委員會頒發感謝狀予陳工程師
預測都是有根有據,並非怪力亂神,符合一個理性工程師的想法,使人對玄學理論有了全新的認識,講座現場反應熱烈。
The webinar was attended by around 300 participants who
were interested and overwhelmed with many questions on
the operations of the TWIN lifts and related safety issues.
On behalf of SSC and BS Division, we would like to express our
sincere thanks to Dr Chan for delivering such an informative
and fruitful talk.
INSTITU
TION
& D
IVISIO
N A
CTIV
ITIES
April 2021 I Hong Kong Engineer 35
Young Members Committee
Pursuing success in public relations - An introduction to becoming an effective facilitatorBy Mr Alvin K W SZE
As engineers, we often meet with people from different
backgrounds, and we also have to organise public
engagements and consultation events to obtain views from
the community.
On 20 February 2021, the Young Members Committee (YMC)
and the Continuing Professional Development Committee
(CPDC) jointly organised the captioned workshop. Ms Laura
Cozijnsen, Founder of Lighthouse Consultant Limited, was
invited to deliver the webinar.
In the first session, the role of facilitator was introduced.
Ms Cozijnsen consolidated the duties of a facilitator, including
(1) keeping an energetic voice to motivate participants,
(2) asking appropriate questions to guide the discussion,
(3) smiling all the time, bridge-building and interacting with
participants, (4) sensing the atmosphere of the events through
the response of participants, and (5) task-making to ensure all
objectives are covered . By making use of polling and chat
box, she demonstrated how to adopt the functions of online
meeting tools to encourage interaction in a virtual meeting.
For the second session, the fundamental skills of being
an effective facilitator were delivered. Among the skills,
she emphasised the importance of first impressions, as it
happens with just a glance and the impression will stay in the
audience’s mind.
To make a good first impression, she highlighted the key
factors, including aggressiveness, competence, confidence
and trustworthiness, etc. In addition, she demonstrated
the use of body language, verbal skills, and the power of
language to engage the participants, like using “we” instead
of “you” and using positive words instead of negative words.
Also, during virtual meeting, the camera should capture our
face and hands, so we can make good use of our body
language.
For the last session, suggestions on asking good questions
were covered. There may be a question-and-answer session
at the end of an event or a session. A good question should
be on topic and relevant to the speaker’s experiences or
interests. Also, open-ended follow-up questions can be asked
to ignite a new conversation.
This workshop served as an introductory course on being an
effective facilitator, and will surely help young members to
host meetings and events in their daily work.
The HKIE Toastmasters Club
HKIE Toastmasters Club Regular Meeting held on 4 Mar 2021By Charles LEE
The Toastmasters Club (TMC) Regular Meeting was held on
4 March 2021 with “Project Management” as the meeting
theme. Members and participants were asked to share their
experiences and the challenges faced during their execution
of engineering projects.
We were grateful to have Ms Melissa Waye as Toastmaster for
the evening and Ir F C Chan as the Table Topics Master.
Ir Chan initiated an interactive Table Topics Session, and invited
the audience to share the challenges they faced and the skills
they learned when managing engineering projects. The topics
also covered the legal responsibilities of engineers, document
traceability as well as communication skills with various project
stakeholders.
INSTITU
TION
& D
IVISIO
N A
CTIV
ITIES
April 2021 I Hong Kong Engineer36
Group photo of the participants and audience
Four prepared speeches were also delivered by Mr Martin Lee
(Level 1 Project 3 Title: Pandemic Life Change; Level 1 Project
4 Title: Evaluation Speech; Level 1 Project 5 Title: Artificial
Intelligence and Human Competition) and Mr Michael Ho
(Level 1 Project 5 Title: Vacation Planning). Their speeches
were evaluated based on their strengths and areas for
improvements in public speaking skills.
Last but not least, the best speakers and evaluator for the
meeting were selected:
• The best table topic speaker: Ir S C Kam
• The best prepared speech speaker: Mr Michael Ho
• The best evaluator: Ms Melissa Waye
TMC meeting is a learn-by-doing platform where participants
can hone their speaking and leadership skills in a relaxed
atmosphere. Don’t miss the chance to not only strengthen
Veneree Club
風水閒談—家居風水與人的關係蔣敬華工程師
睿賢學社於2021年2月24日邀請了陳裕就先生蒞臨主持 「風水閒談 — 家居風水與人的關係」講座。陳先生為風水名人,師承多位玄學名家,深入鑽研鵲橋命理、紫微斗數、命名學及玄空風水等。講座反應熱烈,現場及網上共吸引了132位會員參與。
陳先生首先以科學方法演繹中國傳統文化,深入淺出,並以理性角度介紹風水、五行、陰陽、術數及堪輿等概念。為使參與者易於明瞭各種中國歷史悠久的堪輿及術數,他更引用現今資訊科技領域裏的不同應用程式,來比喻各種命理中不同的運算。
陳先生更詳述流年預計的動向,家居風水與人的關係及影響,風水寶地的要素,以實例闡釋家居風水佈局及化煞擺設等等。最後陳先生更道出流年天干四化的奧秘,及三元九運之預象供與會者參考。
講座引起參加者熱烈回應及提問,陳先生都逐一詳細解答。
睿賢學社各委員及講者向參加者拜年
your public speaking skills, but also expand your engineering
network.
If you are interested in joining us, please contact our
Vice President Public Relations Mr Ben Lee by email at
NO
TICES TO
MEM
BERS
April 2021 I Hong Kong Engineer 37
Obituary
In memory of Ir Dr NIP Kam Fan
The Hong Kong Institution of Engineers expresses deep
sorrow over the passing away of Ir Dr Nip Kam Fan in
Vancouver, Canada on 13 March 2021 at the age of
88.
Ir Dr Nip obtained his BSc degree in civil engineering
with first-class honours awarded by The University of
Hong Kong in 1956. As a distinguished pioneer in traffic
engineering, Ir Dr Nip took a vital role in developing
systematic traffic and transport planning in Hong Kong
in the 1960’s. He was instrumental in the setting up of
the Traffic and Transport Survey Division in the former
Public Works Department.
Ir Dr Nip was also a forerunner in urban planning and
development. He instigated public consultation in
the planning of major urban construction initiatives
and this had later become a standard practice in
pursuing urban development. As head of the Urban
Areas Development Office, he adapted the new
town project management system in spearheading
development projects in the urban areas and this had
culminated to the transformation of the New Territories
Development Department to eventually become
Territory Development Department. During his tenure
as the Director of Engineering Development, Director
of Civil Engineering Services, and later Director of the
Territory Development from 1989 until his retirement
in 1992, he had made profound contributions to the
urbanisation of Hong Kong.
After his retirement, Ir Dr Nip continued to serve the
society in a variety of ways. The development of the
infrastructure of the Haven of Hope Hospital was one of
the remarkable exemplars of Ir Dr Nip’s contributions to
the community.
Ir Dr Nip was a person who endeavoured tirelessly
in pursuit of knowledge. Together with his first BSc
degree in Civil Engineering and two Honorary
Fellowship Degrees, he had also obtained a total of
ten degrees including one Doctoral Degree and two
Master’s Degrees, in a wide spectrum of intellectual
areas including humanities, science, Mathematics,
Economics, religion in addition to engineering.
Ir Dr Nip served the HKIE as the Chairman to the Training
Review Sub-Committee from 1996 to 2001. Whilst the
Institution is greatly indebted to Ir Dr Nip for his long
years of service to the Institution, his contributions to
nurturing young talents for the engineering profession
and the development of Hong Kong, we would like to
offer our deepest condolences to his family.
NO
TICES TO
MEM
BERS
April 2021 I Hong Kong Engineer38
Authorised Persons’, Registered Structural Engineers’ and Registered Geotechnical Engineers’ Disciplinary Board Panel under the Buildings Ordinance
Technical Committee on Building Safety and Health Requirements for Historic Buildings under the Buildings Ordinance
Task Force on Construction Digitalisation
District Cooling Services Ordinance (Cap 624) Appeal Board Panel
Examination Committee for Registration as a Grade B Electrical Worker
Examination Committee for Registration as a Grade C Electrical Worker
Lift and Escalator Safety Advisory Committee
Advisory Committee under Fire Safety (Industrial Buildings) Ordinance Cap 636
Buildings Department
Construction Industry Council
Electrical and Mechanical Services Department
Fire Services Department
The HKIE’s Nominations for External Boards/Committees(From 9 December 2020 to 2 March 2021)
Organisation Representative(s)/Nominee(s)Board/Committee
The invitation for nominations from the Buildings Department was addressed to the ERB and assistance was given by the Institution in providing nomination. The following nominations were submitted to the ERB for consideration:
Authorised Persons in the list of Engineers under Buildings OrdinanceIr Benny LAI Siu Lun, Ir Raymond LO Man Chiu,Ir Patrick NG Wai Ming, Ir Alan YAU Hoi Ngan
Registered Structural Engineers under Buildings OrdinanceIr CHAN Chi Kong, Ir Prof Joseph CHI Wuh Jian,Ir Dr James LAU Chi Wang,Ir Jacky WONG Woon Ki,Ir Andes WONG Yiu Wang
Registered Geotechnical Engineers under Buildings OrdinanceIr Tony CHEUNG Chin To, Ir Lewis CHEUNG Kwan,Ir Rupert LEUNG Kwok Yiu, Ir Henry SHIU Sun Hin,Ir James SZE Wang Cho
Ir Kevin TANG
Ir Dr George SZE Lee Wah
Corporate Members in the Electrical Discipline, Mechanical Discipline or Building Services DisciplineIr Dr Philip CHAN Kan Ip, Ir Dr LEE Wai Ling,Ir Kenneth LI Siu Kong, Ir Dicky POON Yat Fai
Corporate Members in other DisciplinesIr Charles CHAN Hing Lung, Ir IP Tat Yan,Ir Tim LEUNG Man Tim, Ir Kelvin TANG Sher Kin
Ir Dr Edward LO Wai Chau, Ir Keith YUE Wai Pui
Ir Walter AU Tat Kay, Ir Brian CHENG Wai Lung,Ir Dr Anthony LO Chi Wah, Ir Dr WONG Ka Chung
Ir HO Sau Chiu
Ir Jimmy LI Kwun, Ir Dr Fiona TSUI Suk Chong
The HKSAR Government
NO
TICES TO
MEM
BERS
April 2021 I Hong Kong Engineer 39
Training Boards of the VTC
BEAM Plus Interiors (BI) Steering Committee
2020-2021年度九龍城區優質樓宇活動 — 優質樓宇管理比賽暨最佳環境衛生大廈選舉
Vocational Training Council (VTC)
BEAM Society Limited
Kowloon City District Council
The HKIE’s Nominations for External Boards/Committees(From 9 December 2020 to 2 March 2021)
Organisation Representative(s)/Nominee(s)Board/Committee
Building, Civil Engineering and Built Environment Training BoardIr Prof POON Chi Sun
Electrical & Mechanical Services Training BoardIr Brian CHENG Wai Lung
Innovation and Technology Training BoardIr Dr Ritz LAU Ming Ho
Ir Prof Joseph CHI Wuh Jian
Ir LAM Chi Sing, Mr Benjamin LAM Yau Bun,Ir Sally LEUNG Suk Yan
Others
Higher Education Institution
Views on Amendment to Geoguide 5 - Guide to Slope Maintenance
Views on Raising Penalties of Occupartional Safety and Health Legislation
Views on the Studying the Waste Disposal (Charging for Municipal Solid Waste) (Amendment) Bill 2018
Views to the Financial Secretary for the Formulation of the 2021-22 Budget
Views on the Future Arrangement of the Standing Offer Agreement for Quality Professional Services (SOA-QPS)
Views on Consultation on Proposed Amendments to Waterworks Ordinance (Cap 102)
The HKIE’s Submissions to External Organisations(From 11 December 2020 to 21 March 2021)
Organisation
Geotechnical Engineering Office
Labour Department
Legislative Council
Office of the Financial Secretary
Office of the Government Chief Information Officer
Water Supplies Department
The HKSAR Government
Submission
The HKIE Gold Medal 2021Ir Prof Norman W M Ko
The HKIE Honorary Fellow 2021Ir Prof Lee Chack-fan
The HKIE President’s Award 2021Ir David C H Chang
Young Engineer of the Year Award 2021Ir Ivy Y L Leung – AwardeeIr Ng Ka-chun – Certificate of Merit
In view of the current pandemic situation, the award presentation has been postponed. The re-scheduling arrangement will be announced in due course.
The HKIE AwardsThe Institution is pleased to announce the results of the following engineering awards to recognise the awardees’ contribution to the Institution and the engineering profession. The awardees are as follows:
NO
TICES TO
MEM
BERS
April 2021 I Hong Kong Engineer40
The 46th Annual General Meeting (AGM) of the Hong Kong Institution of Engineers will be
held on Monday, 28 June 2021 at 7:00pm at Room S421, L4, Hong Kong Convention and Exhibition Centre (HKCEC), 1 Harbour Road, Wanchai, Hong Kong. Details of the
46th AGM will be announced in due course.
Nominations for the Elected Ordinary Members of the Council are now open. For details,
please contact the Chief Executive and Secretary at Tel: 2895 4446. Nomination form and
Guidelines for election of Elected Ordinary Members are available on the HKIE website:
http://www.hkie.org.hk.
The 46th Annual General Meeting of the Institution
The 45th Annual Dinner The Hong Kong Institution of EngineersDate, time & venueThe 45th Annual Dinner of the Institution will be held at the Convention Hall, Hong Kong Convention and Exhibition Centre, Harbour Road, Wanchai, on Friday, 4 June 2021. The Dinner will start at 7:00pm. Guests are expected to arrive the venue by 6:30pm.
Principal guest The Honourable Mrs Carrie Lam Cheng Yuet-ngor, GBM, GBS, Chief Executive of the Hong Kong Special Administrative Region
PriceHK$1,580 per person (including a pre-dinner cocktail and the western set dinner)
Reservation & enquiriesFor reservation, please visit the event website at: www.hkie.org.hk/AnnualDinner. Payment shall be made upon receipt of the event confirmation email.
For enquiries, please contact the HKIE Conference and Function Section at Tel: 2895 4446 or by Email: [email protected].
The Institution will keep monitoring the latest pandemic and regulatory development to make appropriate adjustments in accordance with the latest prevention and control measures implemented by the Administration. The Institution reserves the right to make any changes to the programme without notice.
Start your paper-free reading journey with Hong Kong EngineerTo be kind to the environment, and to offer readers a better reading experience online, the printed Hong Kong Engineer will soon be phased out and transformed to a paper-free, online-only publication starting from August 2021 with both web and PDF versions for your choice. You are welcome to start your paperless reading journey anywhere and anytime on your mobile, tablet and desktop at: http://www.hkengineer.org.hk.
If you prefer to read the digital version only and not to receive the printed copy from now on, please indicate your preference at the Member Login Area. For enquiries, please contact [email protected]
Opt to read the digital Journal in advance
Read Hong Kong Engineer Online
NO
TICES TO
MEM
BERS
April 2021 I Hong Kong Engineer 41
For more details about this theme issue, you are invited to visit the HKIE website at https://www.hkie.org.hk/en/membership/transactions_call_for_papers
Submit your manuscript via ScholarOne Manuscripts System (S1M)Online submission of manuscripts is available at: http://mc.manuscriptcentral.com/thie.
Before submission, authors are invited to check the submission guidelines at: https://www.hkie.org.hk/en/membership/transactions/ to view the Instruction for Authors and Referencing Style.
EnquiriesEmail: [email protected]
HKIE Transactions is a quarterly periodical that provides a forum for discussing all aspects of engineering from both theoretical and practical perspectives. Full-length papers, technical notes and discussions on any topic of engineering are always welcome.
The HKIE Transactions is now inviting you to submit papers for our Theme Issue on the subject AI for Smart Applications to be published in HKIE Transactions Volume 29 Number 2, June 2022 issue.
Topics suitable include:• Artificial intelligence algorithms• Artificial intelligence applications• Conventional machine learning systems • Deep learning systems
Learning Discount/special offer items
The Hong Kong Management Association Programmes/courses
Living Discount/special offer items
Clothing
Cecilia Yau Couture Tailor-made clothing
Petrol and diesel
Caltex StarCard Petrol and diesel
Esso Fleet Card Petrol and diesel
Wine
Chanti Wine Wine
UNICO J & I Ltd Wine
Watson’s Wine Wine
Others
Hong Kong Parkview Club membership
Mentalcare Connect Co Ltd Groceries
Zurich Insurance Co Ltd General insurance
The HKIE Members' BenefitsThe HKIE devotes to provide a range of services to our members and concerns on members’ well-being. In light of this, the HKIE endeavours to seek potential members’ benefits from different merchants. We are pleased to inform that HKIE members are entitled to the benefits as set out below.
For details of the benefits, please visit the HKIE website at http://hkie.org.hk/membership/benefit/.
HKIE Transactions Theme Issue (June 2022) on "AI for Smart Applications" - Calling for Papers
NO
TICES TO
MEM
BERS
April 2021 I Hong Kong Engineer42
Update on SARTOR3 (Standards and Routes to Registration 3) and UK-SPEC (The UK Standard for Professional Engineering Competence)The Engineering Council (UK) implemented the SARTOR3 system from 1999. Accredited MEng degrees or accredited BEng degrees plus matching sections are required to satisfy the academic requirements for Chartered Engineers in the UK. The HKIE is a signatory to the Washington Accord and the HKIE recognises the accredited MEng or accredited BEng degrees plus matching sections of the Engineering Council (UK) from first intake year 1999 as satisfying the academic requirements for Member of the HKIE.
The SARTOR3 system has been replaced by the UK-SPEC since 1 March 2004 and the updated academic requirements for Chartered Engineers (CEng) Registration are as follows:
(i) An accredited integrated MEng degree; or
(ii) An accredited Bachelors degree with honours in engineering or technology plus either an appropriate Masters degree accredited or approved by a professional engineering institution; or
(iii) An accredited Bachelors degree with honours in engineering or technology plus appropriate further learning to Masters level.
In line with these changes, the HKIE shall accept graduates from the UK as satisfying the academic requirements for Member of the Institution if they could provide document proof from the Engineering Council (UK) that they have satisfied the academic requirements ie either (i), (ii) or (iii) for Chartered Engineers (CEng) Registration.
Online CPD Logbook for Members of the HKIEThe online CPD logbook service is now in operation to provide solely for members of the HKIE to record their personal CPD activities. Members are invited to enter the Member Login area of our website to access to this online free-of-charge CPD logbook for keeping a systemic record of their CPD participation.
For trainees who are under the formal training schemes of the HKIE, they will remain to be required to record their CPD activities in the Record of CPD with endorsement by their Engineering Supervisors.
If you have any questions, please feel free to contact the Member Login Service Support at [email protected].
Report of Activities and HKIE Diary -Place Your Order Online!To promote sustainable development, the Institution has adopted various measures to reduce paper consumption. Members are encouraged to refer to the electronic version of the publications which are available on the Institution’s website and place your order online to minimise the print run.
Report of Activities for Session 2020/2021The Report of Activities contains President’s Report, Chief Executive and Secretary’s Report, and reports from various Boards, Committees, Discipline Advisory Panels and Divisions. If you prefer a printed copy of the Report, please indicate at the Member Login Area of the HKIE website by Friday, 30 April 2021.
HKIE Diary 2022The HKIE Diary is a pocket planner featuring information about the Institution and useful telephone numbers. Members may place an order for a complimentary copy of the HKIE Diary 2022 at the Member Login Area of the HKIE website by Tuesday, 31 August 2021.
Upon successful order, members will receive an acknowledgement email reply in November 2021, and the HKIE Diary will be sent out in December 2021. Late requests will only be accommodated while stocks last and an administrative charge of HK$40 will apply.
HKIE Member Login Areahttps://www.hkie.org.hk/memberarea/
For enquiries on access to the HKIE Member Login Area, please contact [email protected].
Remarks: • Members are encouraged to update their
correspondence address via the online member profile update service at the Member Login Area.
• Please note that only subscribed members with valid membership will receive the publication(s) ordered. Student Members under the Free Student Membership Scheme are not eligible to order the Report of Activities and Diary.
NO
TICES TO
MEM
BERS
April 2021 I Hong Kong Engineer 43
Policy on ReinstatementCorporate Members and Associate Members who have been removed from the membership roll (due to resignation or striking off by Council resolution) for more than seven years will be required to submit fresh applications should they wish to re-join the Institution. All other grades of members who have been removed from the membership roll (due to resignation or striking off by Council resolution) for more than three years will be required to submit fresh applications should they wish to re-join the Institution. Subject to the above, the current payment scale for reinstatement of membership other than for non-resident members, is a reinstatement fee of HK$400 (for administration purpose), plus all arrears in subscription. The arrears in subscription shall be subject to a maximum of three years’ subscriptions prior to the application for reinstatement of membership.
Non-resident members who apply for the reinstatement of membership as non-resident members shall only be required to pay a reinstatement fee of HK$400; all arrears in subscription shall be waived. All other requirements for reinstatement of membership shall remain unchanged.
Mandatory Continuing Professional Development Requirements for Corporate MembersCommencing 1 January 2019, competence-based approach to CPD activities will be fully implemented as part of CPD requirements for Corporate Members. Corporate Members are required to undertake, out of the 30 hours per year, at least 5 hours each for two areas of CPD activities, namely “Technical Matters” (TM) and “Broader Areas of Studies” (BAS).
Corporate Members are required to complete and return an annual CPD Declaration Form together with the membership subscription advice to the Institution. A random checking, usually 1% sampling, on all Corporate Members, will be conducted on an annual basis. Members who are selected for checking will be asked to submit their evidences of CPD.
The following actions shall be taken in case of non-compliance:1. Corporate Members who fail to comply with the CPD
requirement in the first year selected for sampling will be asked to submit their records again in the following year;
2. Warning letters will be issued to Corporate Members who fail to comply in two consecutive years. The HKIE Continuing Professional Development Committee (CPDC) will also follow up with those Corporate Members on the reasons of non-compliance;
3. Corporate Members who fail to comply with the CPD requirements in the third consecutive year may be invited to an interview with HKIE CPDC Representative(s);
4. Corporate Members who fail to comply with the CPD requirements for the 4th consecutive year will have their names published in Hong Kong Engineer.
For details, please refer to the “Revised Guidance Notes for Mandatory Continuing Professional Development (CPD) for Corporate Members” which is available on the HKIE website at http://www.hkie.org.hk.
The following Members have failed to comply with the CPD requirements for four consecutive years:
Ir WONG Kin Nam Ir AU Ka HungIr SO Chung Yuen Ir LO Wing Yiu JeffreyIr TANG Siu Hung
The Members concerned are urged to take immediate action to fulfil the CPD requirements.
Mandatory Basic Safety Training under the Factories and Industrial Undertakings Ordinance, Cap 59Corporate Membership has satisfied the Commissioner for Labour in respect of section 6BA(4), Cap 59 since 1998 on the understanding that Corporate Members have undertaken a minimum units in the Continuing Professional Development (CPD) programmes, which include updates on occupational health and safety legislation. On the basis that Corporate Members will continuously update their knowledge in occupational safety and health through CPD, Corporate Members of the HKIE do not need to take mandatory basic safety training before entering construction sites.
Please note that the HKIE is required to provide such CPD records concerning the recognition of the Corporate Members’ training for the purpose of section 6BA, Cap 59 upon the request of the Labour Department.
Members may refer to the online references of safety training from relevant statutory bodies, including the Occupational Safety & Health Council (http://online.oshc.org.hk/elearning/learner/elearning_c.htm) and Construction Industry Council (http://www.cic.hk/eng/main/safety-corner/).
In MemoriamWONG Chi Tak
The Institution notes with sadness the passing away of Ir Wong Chi-tak. Our deepest sympathy goes to his family and friends.
*Note from the Secretariat: If members come across to know any of our members who has passed away, please notify us.
NO
TICES TO
MEM
BERS
April 2021 I Hong Kong Engineer44
The
HK
IE S
ou
ven
irHKIE TiesWith an eye-catching and elegant design, the HKIE Ties are among the most popular souvenirs for our members. Six new ties are now available and may be an essential piece to add to your wardrobe. Embroidered with the simplifi ed HKIE Dragon Coat of Arms, either in a single, monogram or two-colour pattern, the ties are timeless accessories for fellow engineers and suitable for every occasion. The six new ties are now available at HK$100 each.
If you are tired of rummaging around for pens and paper clips, the HKIE Rubik’s Pen Pot will come in handy for keeping your desk organised. It comes with a design that integrates the new HKIE logo with each letter printed on a side of the pen pot. It has two rows of magnets to store paper clips, and features a twistable-block that allows you to have fun while being practical at the same time. The HKIE Rubik’s Pen Pot is available at HK$80 each.
For enquiries and ordering, please contact our reception desk at 2895 4446.
HKIE Rubik’s Pen Pot
Simplifi ed Dragon Embroidered (Navy blue)
Simplifi ed Dragon Embroidered (Burgundy)
Monogram Dragon Pattern
(Navy Blue)
Monogram Dragon Pattern
(Burgundy)
Two-colour Dragon Pattern
(Navy Blue)
Two-colour Dragon Pattern
(Burgundy)
The HKIE Diary 2021This handy pocket Diary features information about the Institution, useful telephone numbers, notable dates and railway maps to ensure you keep on top of your meetings and schedules. Diaries are available for sale at HK$40 each. Order now while stocks last.
The HKIE Thermo CupPrinted with the Dragon and Beaver Coat of Arms and the new HKIE logo, the HKIE Thermo Cup combines the HKIE’s tradition and modern simplicity style. It is great for hot or cold beverages. The button design enables easy locking and prevents spilling. Its simple elegance and high practicality can certainly satisfy your daily needs. The HKIE Thermo Cup is now available for sale at HK$90 each.
MEM
BERSH
IP
April 2021 I Hong Kong Engineer 45
The following elections were recently approved by Council of The Hong Kong Institution of Engineers:
FellowCHAN Pai Ming JimmyFONG Hok Shing MichaelKO Wing Yin AlbertKWONG Hui Lok AnthonyLAI Kam ToLI Hin WaMUI Kwok WaiYAO ShuhuaiYE Wenjing
No of Fellow: 9
MemberAU Chi KwongCHAN Chun YinCHAN Ka ShingCHAN Tat FuCHAN Yat HoCHENG Chun HoCHENG Ka ManCHEUNG Hoi YanCHEUNG Siu MingCHOW Chi Fung TaylorCHUNG Siu Kei JulianHO Chi ChungHO Hung SangHO King Chung KelvinHO Sau LinHUI Kin PongHUI Sze KeungIP Shing ChunJIAN JiajunJIANG YiKAN Ka WingKWOK Chi Ho LeoKWOK Chin HoLAI Chi FungLAI Wing ToLAM Ho Chun HoraceLAM Kai YinLAM Kam ChuenLAM Ming FaiLAU Kwok TungLAU Wing PuiLEE Lok ManLEUNG Wai KwanLI DazhongLI Po Chun BentonLIN Ho KwanLIU Chun MingLIU Wan Wai BellamyLO Kwok WaiMA XiaoNG Chi FaiNG Siu Lun AlanNG Yuk PingPLANTIER Dimitri Marie Charles
AlbertSHIU Ka WaiSO Chun WingSO Hoi LingTANG Lok Man AlanTSAI Sze MingTSANG Shing-CheungTSANG YikWAN Chi WaiWONG Ka YuWONG Kit PuiWONG Lee Man
WONG Shun HoWONG Siu WanWONG Timothy Ying-kitWONG Wai ChungWONG Wing HongYANG Kwok WaiYIP Yue HinZHANG XunZHONG Chen
No of Member: 64
Associate MemberYIP Ka Man
No of Associate Member: 1
Graduate MemberALNAQDY EamonnAU Chin HoAU Sheung HoAU Yuk KitAU YEUNG Pui LaamCHAI Chi ChungCHAN Belinda PatriciaCHAN Chi FungCHAN Chi LokCHAN Ching HangCHAN ChiuCHAN Chun Kit MatthewCHAN Ho LunCHAN Hon KongCHAN Ka ChunCHAN Ka HeiCHAN Ka HoCHAN Ka Hong GaryCHAN Ka LeongCHAN Ka ManCHAN Kai ChunCHAN Kin HeiCHAN Kin ShingCHAN Kwan LeongCHAN Kwun HongCHAN Lit KeungCHAN Lok HinCHAN Lok ManCHAN Lok PingCHAN Lok YanCHAN Man HinCHAN Michael DouglasCHAN Ming HimCHAN Nik HangCHAN Pui KitCHAN RyanCHAN Shing FungCHAN Sin PingCHAN Siu FungCHAN Sze NgaiCHAN Tsz TingCHAN Wai LeukCHAN Wai LokCHAN Wai TakCHAN Yan Kiu TaliaCHAN Yan WaiCHAN Yau HangCHAN Yeuk NamCHAN Yuen YiCHANG Chi Kit EimonCHAU JethroCHAU Yu KiuCHE Yik LamCHEN Hong LeiCHENG Chi YungCHENG Hiu Wo
CHENG Kan YauCHENG Yat HungCHEOK Gwan YongCHEUNG BenedictCHEUNG Chin ChoiCHEUNG Chun HeiCHEUNG HingCHEUNG Ho ChingCHEUNG Hon KitCHEUNG Hong NingCHEUNG Ka HeiCHEUNG Ka KuenCHEUNG Lok FaiCHEUNG Long YinCHEUNG Lung OnCHEUNG Ming SinCHEUNG Sze WanCHEUNG Tin YingCHEUNG Ting ChunCHEUNG Tsz LokCHEUNG Tsz YuenCHEUNG Wun YinCHEUNG Yan In ZoranaCHIM Tsz SingCHING Wai KinCHIONG Ka Yan VanessaCHIU Pik YinCHIU Tin YauCHIU Wing KeiCHIU Yui ChiCHO Wan ChinCHOI Chak YanCHOI Chung KiuCHOI Lok YiCHOI Shing HeiCHOI Tsz ChungCHOI Wai KinCHOI Yin TingCHONG LuiCHOW ManCHOW Man KeiCHOW Mei KwanCHOW Tai WaiCHOW Tin LongCHOW Tsz ChunCHOW Wai ManCHOY Sheung ChiCHU Kam PuiCHU Wai FuCHU Wai LamCHUI Tsz HoCHUI Wai Hang ThomansCHUN Wa ChoiCHUNG Chun OnCHUNG Chun WaCHUNG Elvis Wing CheongCHUNG Kin TongCHUNG Wai HooCHUNG Wing LamDILIREBA TalifujiangENG Wai HoongFONG Hoi YeeFONG Shun SzeFU ChunFUNG Gregory Tze YuFUNG Kam TongGUNAWAN Sharon PatriciaHO Chun FungHO Chun HeiHO Chun KitHO Chun WoHO Chun YinHO Long FungHO Man HongHO Pui WaiHO Wai Hin
HO Wai LunHO Ying Yin KennethHOO Man WaiHUI Chun LokHUI Ka KuenHUI Shuk MingHUNG Cheuk TingHUNG Chun Hang RoyHUNG Kwong YuenIP Cheuk HinIP Ching ToIP Tat HeiIP Yau ShingJIM Tsz Him BenedictKAN Sheung YinKEUNG Cheuk HinKONG Chi ChungKONG Kam WahKOO Ho SangKWAN Po ChunKWOK Chun ManKWOK Tsun PingKWOK Wai PongKWOK WilsonKWOK Wing TungKWONG Yuan HwaLAI Ka ChunLAI Yeung ChingLAM Chak HongLAM Hoi Chun HarrisLAM Siu KwanLAM Wing Chun VincentLAM Yan ChingLAU Cheuk WaiLAU Chi NgaiLAU Chun NamLAU Chun YinLAU Hiu KinLAU Ka HingLAU Kwun HinLAU Pak HimLAU Wing ToLAW Cheuk YinLAW Ka KiLAW Kai WaiLAW Tsz ChunLAW Wai Shing KenLAW Wing LeongLEE Cheuk TimLEE Chun ManLEE Hoi To WilliamLEE Kit HonLEE Sum Yi AngelLEE Tsz ChungLEE Yin FungLEE Yuen TatLEUNG Chak FungLEUNG Chi ChoiLEUNG Hon SanLEUNG Ka WingLEUNG Man FaiLEUNG Man LokLEUNG Mei YanLEUNG Nok KanLEUNG Sui YingLEUNG Yau ChuenLI Cheuk TungLI Cheuk YingLI Ho ChunLI JiahaoLI Ming HinLI Olivia Pui YuLIANG Pui HoLIM Ming HinLIN MingyanLIU Shiu Loong Harris
MEM
BERSH
IP
April 2021 I Hong Kong Engineer46
LIU Wing KiLO Chi ChingLO Ching Hin WilliamLO Ivan Wing ChunLO Tsz YuenLUI Hiu LamLUK Tsz YuLUO DerenLUO GuangpeiMAN Tsz KuiMAU Yuen ChingMO Kin YipMOK Hoi TingMOK Ka ChunMOK Siu HongMUI Wai HinNG Cheuk LongNG Chi TimNG Ching ShanNG Ho WangNG Hung WingNG Lok Hang EdmundNG Pei KeeNG Wai ChunNG Wing KiNG Yin Yi ChrisNOMANI Faizan AnwarPANG Cheuk YingPANG Ho TakPANG Wai LikPANG Wing TungPOON Cheuk SangPOON Chun HinPOON Lester See-kitPOON Tok ManPOON Tsz ChingREN JiajiaSABHARWAL RohanSETIAWAN StanleySHEK Hoi YingSHI YaqiSHIU UltanSIT Chun ManSIT Ho Ting MartinSIU Tsun HoSIU Wai Nam RockySO Ching Ham RyanSO Sze WingSO Wing TimSO Yiu WaiSUEN Yiu HungSUM Ping HongSZE Yik ChunTAI Chun HinTAI Man ToTANG ChenTANG Chi TinTANG Ka MeiTANG Ming YinTANG Tsz ChunTANG Yuen KiuTO Man HonTO Sze Wai AmyTO Zoe Ngai ManTONG Cheuk TinTSANG Kar LokTSANG Tok HoTSANG Tsz KitTSANG Wai HoTSE Cheuk HimTSE Chung HeiTSE Hon LamTSE Man HinTSE Wai HungTSE Wing Chi BonnieTSOI Yu Tung
TSUI Chun LamTSUI Ka LamTSUI Lok InTSUI Tsz KwanTSUI Yui WingTUNG Kai WaiTUNG TimothyTUNG Wing HanWAN Ka KinWAN Man SzeWANG Yu ShenWONG Cheuk YinWONG Chi SangWONG Hon SumWONG Ka FaiWONG Kam LeungWONG Kan TakWONG Kuen Kwun PaulWONG Long YingWONG Ngo Nam AndrewWONG Pak HinWONG Sze TsitWONG Tsz HimWONG Tsz HinWONG Wai ChingWONG Yat ChunWONG Yee ChingWONG Yu SumWOO On ChunWU KailiangYAN JianYAN Ka CheungYAN RuobingYAN Tsz ChinYANG MingYAU Yee TingYEUNG Cho PanYEUNG Kai Sui IrisYEUNG Ngai HoYEUNG Sai YimYEUNG Timothy Chun YinYICK Marcus Ka-hoYIM YuiYIN CaitongYIP Chi Ho EricYIP Kin SangYIP Yuen Tai OscarYU Chun Huen KevinYU Jun WongYUE An Yee ToniaYUM Ka LokYUNG Nin HangZHANG BoyanZHENG XiaoZHENG YingfeiZHOU JinZHU Weining
No of Graduate Member: 341
Student MemberAGGARWAL MithilAU Ka WaAU Pui YuenAUYEUNG Ka ChunCAI JinhongCAI YuxiangCAO BoCHAN Andrew Chun WaiCHAN Cheong HangCHAN Chi ChaiCHAN Chi FungCHAN ChloeCHAN Chun HeiCHAN Ho Cheung
CHAN Ho KwanCHAN Ka ChunCHAN Ka HoCHAN Ka WaiCHAN Ka WaiCHAN Kai FungCHAN Kin HangCHAN Kin LamCHAN King YinCHAN Lit LukCHAN Long ChingCHAN Long HeiCHAN Long KitCHAN Pak LunCHAN Po KwanCHAN Pui YingCHAN Shing KitCHAN Sin ChingCHAN Sin LamCHAN Sze LeungCHAN Sze TongCHAN Tsz Ching RachelCHAN Tsz FungCHAN Tsz HoCHAN Tsz HoCHAN Tsz Lok NathanCHAN Wai Yu RowenaCHAN Yee HangCHAN Yin Tsam SammieCHAN Yuk HeiCHAN Yun HoCHANG Man ChingCHANG Wai LamCHANG Yu HoCHANG Yun LamCHAU King YinCHAU Ting HeiCHEN GonghaoCHEN Tsun Ming JasonCHENG Chi HinCHENG Ho HimCHENG Ho ManCHENG Ho PakCHENG Ka SingCHENG Ming ChunCHENG Pak HeiCHENG Pak HoCHENG Sung MayCHENG Tsz WaCHENG Yu FungCHEUK Siu LeungCHEUNG Chi HangCHEUNG Hoi HeiCHEUNG Hoi KitCHEUNG Ka LongCHEUNG Ka MingCHEUNG Ka SinCHEUNG Kwok YamCHEUNG Pak LamCHEUNG Pak SumCHEUNG Po SangCHEUNG Pui SanCHEUNG Sau TingCHEUNG Tsoi ManCHEUNG Yiu HoCHIN Heung WingCHIN Kam TatCHING Cho TungCHIU Mei YuCHIU Yiu ChungCHOI Chun WahCHOI Ngon Lun KinseyCHOI Siu KaiCHOI Yan KiuCHOW Chi ShingCHOW Chor Kin
CHOW ChunCHOW Chun SingCHU Hoi LamCHU Sin Hang VictorCHUI Cheuk NamCHUI Man Yin EdwardCHUI Siu HuenCHUM MiuCHUNG Cheuk ManCHUNG Tsz KeungCHUNG Wing MingDEL RIO Harry JonesDENG YangFAN Lok YinFOAK Hoi TungFONG Wai TingFUNG Ching TungFUNG Chun HeiFUNG Hiu MingFUNG Ho FungFUNG Ka LokFUNG Ka ManFUNG Man PoFUNG Pak HongFUNG Sin Yeung YolandaFUNG Sum YiFUNG Yu ShingHA Kai ChitHE QiandeHO FungHO Ho YinHO Kwan SuiHO Man Ching JustieHO Ming KeiHO Ting ChunHO Ting HimHO Wing HoHO Yat FaiHON Chun TingHUANG RuicongHUI Kwan MingHUI Wai YinHUNG Cham FaiHUNG Chung YinHUNG Kit ChingHUNG Tsung LamIP Chun HeiIP Chun MingIP Pak YinIP Wai YeeIP Yan ToIU Pak HongKAM Chun HangKAM Ka HoKAM Tak KitKAM Tsz ChuenKAN Chi SingKAN Choi Lam JasonKO Chun HoKO Cisco Sai YanKO Ho KiuKO Wai ShanKONG Hoi LeungKONG Hoi MingKONG Tik Lun EndersKONG Tsz ChingKOO Man Hong VincentKWOK Ching KiuKWOK Fung YuenKWOK Ho NamKWOK Ho NamKWOK Ka WahKWOK Tsz ChungKWOK Tsz LokKWOK Tsz YinKWOK Wai Tung
MEM
BERSH
IP
April 2021 I Hong Kong Engineer 47
KWOK Wai YinKWOK Wing KuenKWOK Wun KwongKWONG Faat KitLAI Chun LungLAM CharlotteLAM Cheuk HangLAM Chi ChungLAM Chun TingLAM Ho Hin VictorLAM Ka PoLAM Ka TsunLAM Kwun YuLAM Sze ChungLAM Sze ManLAM Sze Yin CeciliaLAM Wai FungLAM Yeung HoLAM Yi Lok EnochLAM Yu HinLAO HaoyueLAU Chi WaLAU Chung NamLAU Ho TungLAU Hok YeeLAU Ka KitLAU Ka LokLAU Kee YinLAU Tin MingLAU Ting FaiLAU Wai LamLAU Wing HeiLAU Wing KaiLAU YuenLAW Chi FaiLAW Ho HinLAW On ShunLAW Tsun HeiLAW Tung YiLAW Wai ChungLAW Wan HongLEE An LiLEE Cheuk YinLEE Chun LokLEE In LordLEE Ka YingLEE Ka YiuLEE Kwok ShingLEE Long ShunLEE Sin Ki CatherineLEE Tsz ChunLEE Tsz ChunLEE Tsz FungLEE Tsz LeungLEE Yiu HeiLEE Yiu HongLEONG Tsz HongLEUNG Chi CheungLEUNG Chun FuiLEUNG Chung KeiLEUNG Chung LaiLEUNG Ka ManLEUNG Ka YatLEUNG Kei LingLEUNG Kin LongLEUNG King LongLEUNG Kit YanLEUNG Man HinLEUNG Ming HimLEUNG Shun LokLEUNG Wing HoLEUNG Wing YanLEUNG Yi ManLEUNG Yiu FungLI Cheng FaLI Jun Wei
LI Ka HeiLI Ka WaiLI Siu MingLI XuanbaoLI Yin LamLI Yu YatLI ZekangLI ZhenLIANG Jian FengLIANG JiantuLIANG RuizhengLIN Hao XianLIN TianmuyeLIU Chun HungLIU GongjianLIU Ka HeiLIU Kit ManLIU Tsz ManLIU Wai ChingLIU Wing YanLO Choi YingLO Chun MingLO Hok ManLO Man Fai HowardLO Sin YueLO Siu ManLOK Kam KwongLOK Man TsunLU Jia ChengLU Tse HauLUI Lai ShanLUI Man KitLUI Pak HimLUI Shun YuLUI Wing SzeLUI Yin NangLUI Yiu WaiLUK Oi KeiMA Yuk HeiMAK Chun KitMAK Hoi TikMAK Kai YimMAK Lok YanMAK Yuen YeungMAN Cheuk NamMAN Chun HeiMAN Hiu FungMAN Tsz KitMAN Wing Kiu KristieMOK Cheuk LamMOK Chun LungMONG Man NgoNG Cheuk FungNG Cheuk LokNG Chin ToNG Chun HeiNG Pui FuNG Pui Him AidanNG Siu CheungNG Ting SumNG Tsz ChungNGAI Chi TakNGAN Man CheukNING JianrongONGKOWIJONO ChristianPANG Chi HinPANG Chun LongPANG Ka HoPANG Kwai KwongPAU Ka ChunPENG Hao YangPON Chon HongPOON Chi KwongPOON Ho YukPOON Lut MingPUN Cheuk Hei
PUN Wang LamSHE Pak YuSHEK Kai NamSHEK Man KitSHIU Cheuk NamSHMIDT ArailymSIN Ka ChunSIT Hiu FungSO Chi HinSO Kai HongSO Kai Lun AllenSO Kwai FongSO Man YinSO Sai WahSUM YvetteTAI Chung YinTAM Chun KitTAM Ka WingTAM Kam HungTAM Wai MeiTAM Yuk LaiTAN HaojunTANG Cheuk SingTANG Chi HongTANG Chun TingTANG Kam ToTANG Manuel JoaoTANG Tze PongTANG Wing Yee VenusTO Ho Kit AresTO Wai LunTONG Michael Kin HayTONG Yiu WaiTSANG Chi WangTSANG Chiu LokTSANG Ka ChunTSANG Pui KinTSANG Wai Ho RiccoTSANG Wing Yu TaniaTSANG Yik ChiTSANG Yuk LunTSE Kai YinTSE Pak HeiTSE Sik KeiTSE Tin ChunTSOI Chak YuenTSUI Hin ShingTSUI Kai HongVIRMANI VedikaWAN Ho YiWAN Ka LokWAN Pak NgoWANG BinghongWONG Ching LingWONG Choi LamWONG Chong SanWONG Chun HoWONG Chun KinWONG Chun ManWONG Hon KitWONG Hui ShunWONG Jun Yan JohnsonWONG Ka ChunWONG Kei ChunWONG Kui TaiWONG Kwok WaiWONG Man FungWONG Man HoWONG Man HoWONG Ng SingWONG Ngai ChunWONG Ngai PuiWONG Sing LungWONG Sze ChunWONG Sze Wa
WONG Tak LungWONG Tsz HimWONG Wai KuenWONG Yiu ChoWONG Yu KiWU HaohuaWU HoWU QuanbingWU WenfengWU YetingXING JiaqianXU Chak WaiYAN Kai HangYANG XuanYAU Chun FaiYAU CyrusYAU Ka HeiYAU Wai ChiYEE Chun ManYEUNG Adrian Justin Tsoi ChunYEUNG Chui MeiYEUNG Chun LokYEUNG Hiu FungYEUNG Ho LongYEUNG Ming HinYEUNG Pak FaiYEUNG Pui LamYEUNG Tsz LeungYEUNG WaYEUNG Yat ChunYIM Hiu ChungYIM Ka WaiYIM Kwan ToYIP Chi HangYIP Chi LongYIP Chin Fung JeredYIP Sin PingYIU Fai PanYIU Hiu NamYIU Ho KeungYIU Tsz ChingYU CanquanYU Cheuk HangYU Ching TungYU Kwan KinYU SihaoYU Ting HinYU Tsz LungYUEN Chun HoYUEN Hon WaiYUNG Kim KeungZHENG JunmengZHENG JunweiZHENG LiangbinZHOU Mingxiong
No of Student Member: 448
The following elections to Additional Discipline were recently approved by Council of The Hong Kong Institution of Engineers:
Name DisciplinesHUI Shun Chong BUDLAM Cheuk Wing CVLLEE Tung Wah ELLLIU Junchang GELRUAN Zhijian GELWONG Kin Yan BSSYIP Ka Chuen BSS
Total Elections: 7
48 For course details and application forms, please refer to the Course Calendar under Continuing Professional Development at the HKIE homepage at http://www.hkie.org.hk. Please note that all course information is subject to alteration by Course Providers without prior notice.
CP
D P
RO
GR
AM
ME
Accredited Certification International Ltd
ISO 50001:2018 Implementation and Documentation (TNEn3) • 6 April 2021 (Tue) (CPD0406)• 3 May 2021 (Mon) (CPD0506)• 1 June 2021 (Tue) (CPD0606)9:30am - 5:00pm; HK$1,560 (HK$1,460 for HKIE Members)
Six Sigma Yellow Belt (T6YB) • 6 & 7 April 2021 (Tue & Wed) (CPD0403)• 6 & 7 May 2021 (Thur & Fri) (CPD0503)• 7 & 8 June 2021 (Mon & Tue) (CPD0603)9:30am - 5:00pm; HK$3,630 (HK$3,430 for HKIE Members)
ISO 9001:2015 Internal Auditor Training (TQ4) • 6 & 7 April 2021 (Tue & Wed) (CPD0409)• 6 & 7 May 2021 (Thur & Fri) (CPD0509)• 7 & 8 June 2021 (Mon & Tue) (CPD0609)9:30am - 5:00pm; HK$3,190 (HK$2,990 for HKIE Members)
Integrated Management System Internal Auditor Training (TM4) • 6 & 7 April 2021 (Tue & Wed) (CPD0413)• 6 & 7 May 2021 (Thur & Fri) (CPD0513)• 7 & 8 June 2021 (Mon & Tue) (CPD0613)9:30am - 5:00pm; HK$3,850 (HK$3,650 for HKIE Members)
ISO 50001:2018 Energy Review Training (TNEn1)• 8 April 2021 (Thur) (CPD0412)• 6 May 2021 (Thur) (CPD0512)• 7 June 2021 (Mon) (CPD0612)9:30am - 1:00pm; HK$990 (HK$890 for HKIE Members)
ISO 14001:2015 Internal Auditor Training (TE4) • 8 & 9 April 2021 (Thur & Fri) (CPD0404)• 10 & 11 May 2021 (Mon & Tue) (CPD0504)• 9 & 10 June 2021 (Wed & Thur) (CPD0604)9:30am - 5:00pm; HK$3,190 (HK$2,990 for HKIE Members)
Safety Management and Laboratory Safety Application Training (SP01)• 12 April 2021 (Mon) (CPD0418)• 10 May 2021 (Mon) (CPD0518)• 21 June 2021 (Mon) (CPD0618)9:30am - 5:00pm; HK$2,145 (HK$1,995 for HKIE Members)
IRCA Certificated ISO 14001:2004 EMS Auditor/Lead Auditor Training (TE9)• 12, 13, 14, 15 & 16 April 2021 (Mon - Fri) (CPD0405)• 3, 4, 5, 6 & 7 May 2021 (Mon - Fri) (CPD0505)• 7, 8, 9, 10 & 11 June 2021 (Mon - Fri) (CPD0605)9:00am - 5:30pm; HK$10,600 (HK$10,400 for HKIE Members)
Key Performance Indicators (TKPI) • 13 April 2021 (Tue) (CPD0408)• 18 May 2021 (Tue) (CPD0508)• 15 June 2021 (Tue) (CPD0608)9:30am - 5:00pm; HK$2,590 (HK$2,390 for HKIE Members)
ISO 55001 Implementation and Documentation (TA3)• 15 April 2021 (Thur) (CPD0416)• 20 May 2021 (Thur) (CPD0516)• 17 June 2021 (Thur) (CPD0616)9:30am - 5:00pm; HK$1,500 (HK$1,400 for HKIE Members)
ISO 55001 Effective Application (TA2)• 16 April 2021 (Fri) (CPD0415)• 14 May 2021 (Fri) (CPD0515)• 25 June 2021 (Fri) (CPD0615)9:30am - 5:00pm; HK$1,500 (HK$1,400 for HKIE Members)
Safety Tips Training for Works in Office and Out of Office (SP02)• 20 April 2021 (Tue) (CPD0419)• 18 May 2021 (Tue) (CPD0519)• 22 June 2021 (Tue) (CPD0619)9:30am - 5:00pm; HK$2,145 (HK$1,995 for HKIE Members)
Safety and 5S in Construction Warehouse (SP08) • 20 April 2021 (Tue) (CPD0424)• 25 May 2021 (Tue) (CPD0524)• 29 June 2021 (Tue) (CPD0624)9:30am - 1:30pm; HK$1,100 (HK$1,000 for HKIE Members)
Advanced Quality Circle Facilitator Course (TQC4) • 21 April 2021 (Wed) (CPD0410)• 26 May 2021 (Wed) (CPD0510)• 23 June 2021 (Wed) (CPD0610)9:30am - 5:00pm; HK$1,660 (HK$1,460 for HKIE Members)
Safe and Civilised Construction (SP03)• 21 April 2021 (Wed) (CPD0420)• 12 May 2021 (Wed) (CPD0520)• 23 June 2021 (Wed) (CPD0620)9:30am - 1:30pm; HK$1,100 (HK$1,000 for HKIE Members)
Six Sigma Green Belt (T6GB)• 21, 22 & 23 April 2021 (Wed, Thur & Fri) (CPD0414)• 26, 27 & 28 May 2021 (Wed, Thur & Fri) (CPD0514)• 23, 24 & 25 June 2021 (Wed, Thur & Fri) (CPD0614)9:30am - 5:30pm; HK$6,060 (HK$5,860 for HKIE Members)
Safety Practice in Construction (SP04)• 22 April 2021 (Thur) (CPD0421)• 20 May 2021 (Thur) (CPD0521)• 24 June 2021 (Thur) (CPD0621)9:30am - 1:30pm; HK$1,100 (HK$1,000 for HKIE Members)
ISO 45001:2018 Internal Auditor Training (TNS4)• 22 & 23 April 2021 (Thur & Fri) (CPD0411)• 27 & 28 May 2021 (Thur & Fri) (CPD0511)• 17 & 18 June 2021 (Thur & Fri) (CPD0611)9:30am - 5:00pm; HK$2,900 (HK$2,700 for HKIE Members)
ISO 55001 Internal Auditor Training (TA4)• 22 & 23 April 2021 (Thur & Fri) (CPD0417)• 27 & 28 May 2021 (Thur & Fri) (CPD0517)• 17 & 18 June 2021 (Thur & Fri) (CPD0617)9:30am - 5:00pm; HK$3,190 (HK$2,990 for HKIE Members)
Occupational Safety on Display Screen Equipment (SP05) • 23 April 2021 (Fri) (CPD0422)• 21 May 2021 (Fri) (CPD0522)• 25 June 2021 (Fri) (CPD0622)9:30am - 5:00pm; HK$2,145 (HK$1,995 for HKIE Members)
Safety Practice in Confined Space (SP06)• 26 April 2021 (Mon) (CPD0423)• 24 May 2021 (Mon) (CPD0523)• 28 June 2021 (Mon) (CPD0623)9:30am - 1:30pm; HK$1,100 (HK$1,000 for HKIE Members)
ISO 50001:2018 Internal Auditor Training (TNEn4) • 26 & 27 April 2021 (Mon & Tue) (CPD0407)• 25 & 26 May 2021 (Tue & Wed) (CPD0507)• 24 & 25 June 2021 (Thur & Fri) (CPD0607)9:30am - 5:00pm; HK$3,190 (HK$2,990 for HKIE Members)
IRCA Certificated ISO 9001:2015 QMS Auditor/Lead Auditor Training (TQ9)• 26, 27, 28, 29 & 30 April 2021 (Mon - Fri) (CPD0425)• 24, 25, 26, 27 & 28 May 2021 (Mon - Fri) (CPD0525)• 21, 22, 23, 24 & 25 June 2021 (Mon - Fri) (CPD0625)9:00am - 5:30pm; HK$10,600 (HK$10,400 for HKIE Members)
Venue: Unit 1901, 19/F, Yen Sheng Centre, 64 Hoi Yuen Road, Kwun Tong, Kowloon
Registration: Please download the Enrolment Form from the HKIE website and return to ACI.
Enquiries: Training Department at Tel: 3977 8983 Fax: 2806 1940 Email: [email protected] Website: http://www.aci-limited.com/
Gala Education Company
eLearning Series:
English for Technical Writing• 1 - 30 April 2021 (CPD0429)• 1 - 31 May 2021 (CPD0528)• 1 - 30 June 2021 (CPD0632)Duration: three hours; HK$780
49For course details and application forms, please refer to the Course Calendar under Continuing Professional Development at the HKIE homepage at http://www.hkie.org.hk. Please note that all course information is subject to alteration by Course Providers without prior notice.
CP
D P
RO
GR
AM
ME
Improving the Style of Your English Writing • 1 - 30 April 2021 (CPD0430)• 1 - 31 May 2021 (CPD0529)• 1 - 30 June 2021 (CPD0633)Duration: three hours; HK$780
Mistakes to Avoid in Conversational English• 1 - 30 April 2021 (CPD0431)• 1 - 31 May 2021 (CPD0530)• 1 - 30 June 2021 (CPD0634)Duration: three hours; HK$780
The Financial Side of Project Management • 1 - 30 April 2021 (CPD0432)• 1 - 31 May 2021 (CPD0531)• 1 - 30 June 2021 (CPD0635)Duration: three hours; HK$780
Business Finance for Non-finance Managers • 1 - 30 April 2021 (CPD0433)• 1 - 31 May 2021 (CPD0532)• 1 - 30 June 2021 (CPD0636)Duration: three hours; HK$780
Lessons from Financial Crisis • 1 - 30 April 2021 (CPD0434)• 1 - 31 May 2021 (CPD0533)• 1 - 30 June 2021 (CPD0637)Duration: four hours; HK$780
Understanding Financial Risk and Hedging by Market Products• 1 - 30 April 2021 (CPD0435)• 1 - 31 May 2021 (CPD0534)• 1 - 30 June 2021 (CPD0638)Duration: three hours; HK$780
Registration: Please send an email to [email protected], stating the e-class of interest and contact information.
Enquiries: Dr Kong at Tel: 9310 7127 Email: [email protected]
Hong Kong Legal Training Institute
Essentials of Mediation Skills in Workplace (CPD0436)14 April 2021 (Wed); 9:30am - 5:00pm; HK$1,500
Criminal Law for Construction Professionals (CPD0437)16 April 2021 (Fri); 9:30am - 5:00pm; HK$1,500
Essential Laws for Engineers (CPD0438)23 April 2021 (Fri); 9:30am - 5:00pm; HK$1,500
Legal Aspects of Design-build-operate Contracts (CPD0535)7 May 2021 (Fri); 9:30am - 5:00pm; HK$1,500
Contract Law Essentials for Non-lawyers (CPD0536)14 May 2021 (Fri); 9:30am - 5:00pm; HK$1,500
Essentials of Contracts (Right of Third Parties) Ordinance (CPD0537)26 May 2021 (Wed); 9:30am - 5:00pm; HK$1,500
Legal Aspects of Tendering (CPD0639)2 June 2021 (Wed); 9:30am - 5:00pm; HK$1,500
Legal Aspects of NEC Contracts for NEC Project Managers (CPD0640)11 June 2021 (Fri); 9:30am - 5:00pm; HK$1,500
Force Majeure in Hong Kong Business Contracts (CPD0641)18 June 2021 (Fri); 9:30am - 5:00pm; HK$1,500
Essential Laws for Modular Integrated Construction in Hong Kong (CPD0642)23 June 2021 (Wed); 9:30am - 5:00pm; HK$1,500
Legal Aspects of Negligence for Engineers (CPD0643)25 June 2021 (Fri); 9:30am - 5:00pm; HK$1,500
Venue: HKMA, 14/F, Fairmont House, 8 Cotton Tree Drive, Central, Hong Kong
Registration: Please download the Enrolment Form from the HKIE website and return with a crossed cheque made payable to “Hong Kong Legal Training Institute Ltd” to Hong Kong Legal Training Institute, Rm 503, Tower Two, Lippo Centre, Admiralty, Hong Kong.
Enquiries: Tel: 2869 6322 Email: [email protected]
Mastermind Training Institute (Hong Kong) Ltd
Budgeting and Cost Management for Non-finance Professionals - Webinar (CPD0466)19 April 2021 (Mon); 9:30am -5:00pm; HK$1,500
Essentials of NEC4 Term Service Contract (TSC) (CPD0564)14 May 2021 (Fri); 9:30am - 5:00pm; HK$2,000
Essential Finance and Accounting Techniques for Non-finance Professionals - Webinar (CPD0565)17 May 2021 (Mon); 9:30am - 5:00pm; HK$1,500
Venue: Pico Tower, Wanchai, Hong Kong
Registration: Please complete the online Enrolment Form from the HKIE website.
Enquiries: Training Department at Tel: 2709 1038 Fax: 2569 0108 Email: [email protected]
MindPower Development Academy Co Ltd
Interview Secret Leading to Career Success for Engineers and Managers • 14 April 2021 (Wed) (CPD0443)• 12 May 2021 (Wed) (CPD0543)• 16 June 2021 (Wed) (CPD0648)9:00am - 5:00pm; HK$1,800
Amazing Presentation Skills for Engineers and Managers • 21 & 22 April 2021 (Wed & Thur) (CPD0441)• 26 & 27 May 2021 (Wed & Thur) (CPD0541)• 23 & 24 June 2021 (Wed & Thur) (CPD0646)9:00am - 5:00pm; HK$6,800
Qualified Vibration Monitoring and Diagnosis Analyst (Level I) • 22 April 2021 (Thur) (CPD0439)• 27 May 2021 (Thur) (CPD0538)9:30am - 5:30pm; HK$3,250
Behavioural Based Safety Observation for Safety Officers, Engineers and Managers • 23 April 2021 (Fri) (CPD0442)• 27 May 2021 (Thur) (CPD0542)• 29 June 2021 (Tue) (CPD0647)9:00am - 5:00pm; HK$3,500
Psychology for Safety Officers and Managers • 26 April 2021 (Mon) (CPD0440)• 24 May 2021 (Mon) (CPD0540)• 28 June 2021 (Mon) (CPD0645)9:00am - 5:00pm; HK$3,300
50 For course details and application forms, please refer to the Course Calendar under Continuing Professional Development at the HKIE homepage at http://www.hkie.org.hk. Please note that all course information is subject to alteration by Course Providers without prior notice.
CP
D P
RO
GR
AM
ME
Professional Certificate in Modular Integrated Construction (MiC) for Project Managers and Clerks of Works (CPD0574)31 May, 2, 7, 9, 16, 21, 23, 28, 30 June, 7, 9, 14, 16, 21, 28, 30 July & 7 August 2021 (Mon, Wed, Fri & Sat); 7:00pm - 10:00pm; HK$4,400
Construction Dispute Management Course (CPD0629)1, 8, 15, 22 June 2021 (Tue); 7:00pm - 10:00pm; HK$800
Reinforced Concrete - Defect Diagnosis and Remedy Course (CPD0630)1, 3, 8 &10 June 2021 (Tue & Thur); 7:00pm - 10:00pm; HK$800
Slope Stability and Slope Maintenance Course (SSM(M)) (CPD0631)3, 10, 17, 24 June 2021 (Thur); 7:00pm - 9:00pm; HK$550
Conditions of Contract Course - Civil Works (CPD0628)8, 15, 22, 29 June & 6, 13 July 2021 (Tue); 7:00pm - 9:30pm; HK$900
Conditions of Contract Course - Building Works (CBWZ(M)) (CPD0627)25 June & 2, 9, 16 July 2021 (Fri); 7:00pm - 10:00pm; HK$800
Venue: CIC Kowloon Bay Training Centre, 44 Tai Yip Street, Kowloon Bay, Kowloon
Registration: Please download the Enrolment Form from the HKIE website and return to HKIC. Applicants will be arranged to pay course fee only after application is accepted.
Enquiries: Ms Ho at Tel: 2100 9000 (press 1 - 4) Fax: 2100 9575 (CPD0427 & CPD0573); Mr Lai at Tel: 2100 9000 (press 1 - 4) Fax: 2100 9575 (CPD0328); Ms Kwan at Tel: 2100 9000 (press 1 - 4) Fax: 2100 9575 (CPD0526, CPD0627 & CPD0629); Ms Chan at Tel: 2100 9000 (press 1 - 4) Fax: 2100 9575 (CPD0628 & CPD0631); Ms Han at Tel: 2100 9000 (press 1 - 4) Fax: 2100 9575 (CPD0574)
SGS Hong Kong Ltd
ISO 13485:2016 Medical Devices Quality Management Systems Foundation Course (CPD0446)8 & 9 April 2021 (Thur & Fri); 9:30am - 5:30pm; HK$1,800 (HK$1,440 for HKIE Members)
SA8000®2014 Standard Requirement and Interpretation Training (CPD0449)12 April 2021 (Mon); 9:30am - 5:30pm; HK$1,800 (HK$1,440 for HKIE Members)
IRCA Certified ISO 45001: 2018 Auditor Migration Course (Module 1 and 2 Combined Course) (CPD0450)12 & 13 April 2021 (Mon & Tue); 9:00am - 6:00pm; HK$3,900 (HK$3,120 for HKIE Members)
Introduction to ISO 45001 Occupational Health and Safety Management Systems Training Course (CPD0445)16 April 2021 (Fri); 9:30am - 5:30pm; HK$1,800 (HK$1,440 for HKIE Members)
ISO 50001:2018 Energy Management System (EnMS) Foundation Training (CPD0447)26 April 2021 (Mon); 9:30am - 5:30pm; HK$1,800 (HK$1,440 for HKIE Members)
Risk Based Thinking for ISO 9001:2015 Awareness Course (CPD0448)26 April 2021 (Mon); 9:30am - 5:30pm; HK$1,800 (HK$1,440 for HKIE Members)
ISO 31000 Risk Management for Engineers Training (CPD0548)3 May 2021 (Mon); 9:00am - 6:00pm; HK$1,300 (HK$1,040 for HKIE Members)
LEAN Six Sigma Green Belt (BS13503) (CPD0539)7, 14, 21 & 28 May 2021 (Fri); 9:00am - 5:00pm; HK$4,800
Qualified Vibration Monitoring and Diagnosis Analyst (Advanced Level) (CPD0644)17 & 24 June 2021 (Thur); 9:30am - 5:30pm; HK$5,800
Venue: Unit 2101, 21/F, Gala Place, 56 Dundas Street, Mongkok, Kowloon
Registration: Website: http://www.mpda.com.hk/registration/
Enquiries: Miss Melinda at Tel: 8192 9898 Fax: 2474 3821
Occupational Safety & Health Council
Health and Safety for Graduate Engineers (Processing Industry) (CPD0444)21, 22 & 23 April 2021 (Wed, Thur & Fri); 9:30am - 5:00pm; HK$1,870/HK$1,680*/HK$1,310**
Risk Assessment for Graduate Engineers (CPD0545)17 & 24 May 2021 (Mon); 9:30am - 5:00pm; HK$1,080/HK$970*/HK$760**
Health and Safety for Graduate Engineers (Construction Industry) (CPD0649)2, 3 & 4 June 2021 (Wed, Thur & Fri); 9:30am - 5:00pm; HK$1,870/HK$1,680*/HK$1,310**
Construction Safety Management Systems Training for Graduate Engineers (CPD0651)11, 18 & 25 June 2021 (Fri); 9:30am - 5:00pm; HK$2,270/HK$2,040*/HK$1,590**
Health and Safety for Graduate Engineers (Electrical and Mechanical Industry) (CPD0650)21, 22 & 23 June 2021 (Mon, Tue & Wed); 9:30am - 5:00pm; HK$1,870/HK$1,680*/HK$1,310**
*Training fee for Ambassador & Green Cross Group Member**Training fee for SMEs
Venue: North Point OSH Training Centre, 18/F, China United Centre, 28 Marble Road, North Point, Hong Kong
Registration: Please download the Enrolment Form from the HKIE website and return with a crossed cheque made payable to “Occupational Safety and Health Council” to OSHC.
Enquiries: Miss Helly Hui at Tel: 2116 5708 Fax: 2151 7411
School of Professional Development in Construction - Hong Kong Institute of Construction
Conditions of Contract Course - Civil Works (CCWZ(M)) (CPD0327)13, 20, 27 April & 4, 11, 18 May 2021 (Tue); 7:00pm - 9:30pm; HK$900
Planning for a Building Project Course (PBP(M)) (CPD0427)14, 21, 28 April & 5, 12 May 2021 (Wed); 7:00pm - 10:00pm; HK$860
Certificate in Digital Construction and Supervision Technologies for Front-line Supervisors (CPD0573)26, 28 May & 2, 4, 9 June 2021 (Wed & Fri); 7:00pm - 10:00pm; HK$1,600
51For course details and application forms, please refer to the Course Calendar under Continuing Professional Development at the HKIE homepage at http://www.hkie.org.hk. Please note that all course information is subject to alteration by Course Providers without prior notice.
CP
D P
RO
GR
AM
ME
ISO 55001 Asset Management for Engineers Training (CPD0550)3 May 2021 (Mon); 9:00am - 6:00pm; HK$1,300 (HK$1,040 for HKIE Members)
IRCA Certified ISO 9001:2015 Quality Management Systems Internal Auditor Training Course (CPD0547)3 & 4 May 2021 (Mon & Tue); 9:00am - 6:00pm; HK$4,000 (HK$3,200 for HKIE Members)
Workshop on Crisis Management in Food Industry (CPD0546)24 May 2021 (Mon); 9:30am - 5:30pm; HK$1,800 (HK$1,440 for HKIE Members)
ISO 45001:2018 Occupational Health and Safety Management Systems - Internal Auditor Training Course (CPD0549)24 & 25 May 2021 (Mon & Tue); 9:00am - 6:00pm; HK$4,000 (HK$3,200 for HKIE Members)
Venue: Units 303 & 305, 3/F, Building 22E, Phase 3, Hong Kong Science Park, the New Territories
Registration: Please download the Enrolment Form from the HKIE website and return with a crossed cheque made payable to “SGS Hong Kong Ltd - SGS Academy” to Ms Sandy Mok, 17/F, The Octagon, No 6 Sha Tsui Road, Tsuen Wan, the New Territories.
Enquiries: Ms Sandy Mok at Tel: 2765 3530 Fax: 2333 2257
STEP Coaching & Consulting Ltd
Problem Solving and Decision Making (CPD0451)12 & 13 April 2021 (Mon & Tue); 9:15am - 5:15pm; HK$3,000 (HK$2,600 for HKIE Members)
Improving Personal Effectiveness (CPD0453)19 April 2021 (Mon); 9:15am - 5:15pm; HK$1,500 (HK$1,300 for HKIE Members)
Increase Your Influence at Work (CPD0454)20 April 2021 (Tue); 9:15am - 5:15pm; HK$1,500 (HK$1,300 for HKIE Members)
Project Conflict and Relationship Management (CPD0452)26 & 27 April 2021 (Mon & Tue); 9:15am - 5:15pm; HK$3,000 (HK$2,600 for HKIE Members)
Enhance Business Value through Creativity Thinking (CPD0551)3 & 4 May 2021 (Mon & Tue); 9:15am - 5:15pm; HK$3,000 (HK$2,600 for HKIE Members)
Project Management Fundamental (CPD0552)17 May 2021 (Mon); 9:15am - 5:15pm; HK$1,500 (HK$1,300 for HKIE Members)
Seven Habits of Success (CPD0553)24 & 25 May 2021 (Mon & Tue); 9:15am - 5:15pm; HK$3,000 (HK$2,600 for HKIE Members)
Improving Problem-solving Skills on Phone (CPD0653)7 June 2021 (Mon); 9:15am - 5:15pm; HK$1,500 (HK$1,300 for HKIE Members)
Build High Performing Team (CPD0654)8 June 2021 (Tue); 9:15am - 5:15pm; HK$1,500 (HK$1,300 for HKIE Members)
Consultative Selling and Negotiation Skill (CPD0652)21 & 22 June 2021 (Mon & Tue); 9:15am - 5:15pm; HK$3,000 (HK$2,600 for HKIE Members)
Venue: 1/F, Nathan Tower, 518 - 520 Nathan Road, Yaumatei, Kowloon (to be confirmed)
Registration: Please download the Enrolment Form from the HKIE website and return with a crossed cheque made payable to “STEP Coaching & Consulting Ltd” to Mr Stephen Lam, or direct payment to HSBC account number: 801-147406-838.
Enquiries: Mr Stephen Lam at Tel: 6048 8001 Email: [email protected] Website: http://www.step-coaching.com.hk
TQM Consultants Company Ltd
Thrive to Success through KPI/OKR Setting • 2 April 2021 (Fri) (CPD0455)• 10 May 2021 (Mon) (CPD0557) 9:30am - 5:00pm; HK$1,600 (HK$1,300 for HKIE Members)
Becoming an Inspirational Leader • 3 April 2021 (Sat) (CPD0456)• 26 June 2021 (Sat) (CPD0664)9:30am - 5:00pm; HK$1,600 (HK$1,300 for HKIE Members)
Professional Project Management • 7 April 2021 (Wed) (CPD0457)• 12 April 2021 (Mon) (CPD0459)• 23 April 2021 (Fri) (CPD0463)• 27 April 2021 (Tue) (CPD0465)• 7 May 2021 (Fri) (CPD0556)• 15 May 2021 (Sat) (CPD0559)• 22 May 2021 (Sat) (CPD0561)• 1 June 2021 (Tue) (CPD0655)• 12 June 2021 (Sat) (CPD0659)• 23 June 2021 (Wed) (CPD0663)• 29 June 2021 (Tue) (CPD0665)9:30am - 5:00pm; HK$1,600 (HK$1,300 for HKIE Members)
Design Thinking Workshop (CPD0458)9 April 2021 (Fri); 9:30am - 5:00pm; HK$1,600 (HK$1,300 for HKIE Members)
Enabling Agile Response to Market by Shortening the Production Cycle • 14 April 2021 (Wed) (CPD0460)• 21 May 2021 (Fri) (CPD0560)9:30am - 5:00pm; HK$1,600 (HK$1,300 for HKIE Members)
Sustainable Development Planning Workshop • 15 April 2021 (Thur) (CPD0461)• 12 May 2021 (Wed) (CPD0558)• 3 June 2021 (Thur) (CPD0656) 1:30pm - 5:30pm; HK$4,800 (HK$4,500 for HKIE Members)
Achieving Timeliness, Quality and Margin with Seven QC Tools • 17 April 2021 (Sat) (CPD0462)• 19 June 2021 (Sat) (CPD0661)9:30am - 5:00pm; HK$1,600 (HK$1,300 for HKIE Members)
No More Downtime! Securing Business' Asset to Enable Business Continuity with ISO 55001 (CPD0464)26 April 2021 (Mon); 9:30am - 5:00pm; HK$1,600 (HK$1,300 for HKIE Members)
Successful Manager Series - (2) Workshop on Building Your Influencing Power • 3 May 2021 (Mon) (CPD0554)• 18 June 2021 (Fri) (CPD0660)9:30am - 5:00pm; HK$1,600 (HK$1,300 for HKIE Members)
Avoid All Mistakes to Save Your Energy, Time and Resource (CPD0555)4 May 2021 (Tue); 9:30am - 5:00pm; HK$1,600 (HK$1,300 for HKIE Members)
Building Win-win Partnership in Your Supply Chain (CPD0562)25 May 2021 (Tue); 9:30am - 5:00pm; HK$1,600 (HK$1,300 for HKIE Members)
ISO14001:2015 EnMS Internal Auditor Training (CPD0563)28 May 2021 (Fri); 9:30am - 5:00pm; HK$1,600 (HK$1,300 for HKIE Members)
52 For course details and application forms, please refer to the Course Calendar under Continuing Professional Development at the HKIE homepage at http://www.hkie.org.hk. Please note that all course information is subject to alteration by Course Providers without prior notice.
CP
D P
RO
GR
AM
ME
Standard Enrolment ProceduresPlease complete and return the Standard Reply Form together with a crossed cheque (if required) to respective organisers. You may refer to respective course details for payment method.
Please be reminded that applications will not be accepted without submission of the appropriate fee.
For further details of the Standard Enrolment Procedures when applying CPD courses and/or seminars organised by the HKIE, please refer to the HKIE homepage at http://www.hkie.org.hk.
EnquiriesPlease contact Training & Development Section, the HKIE at Tel: 2895 4446 Fax: 2577 7791.
Continuing Professional Development (CPD)
Requirements for Candidates Applying to Become Corporate/
Associate MembersCandidates who would like to apply for Corporate or Associate Membership must meet the CPD requirements of the Institution.
For application to Corporate Membership, candidates under formal training route (Scheme “A”) must have undertaken a minimum average of 45 hours (7.5 days) per year calculated from the commencement date of Scheme “A”, up to the time of the Professional Assessment. For general experience route, candidates must meet a minimum average of 45 hours per year for the six years immediately prior to their application for Professional Assessment. For mature route, candidates must have undertaken an average of 45 hours (7.5 days) per year of relevant extra developmental updating for the three years immediately prior to their application for Professional Assessment.
For application to Associate Membership, candidates under formal training route must have undertaken a minimum average of 45 hours (7.5 days) per year from the commencement date of training scheme, up to the time of the Assessment. For general experience route or mature route, candidates must have undertaken a minimum average of 45 hours (7.5 days) per year for the two years immediately prior to their application for Assessment.
Managing Health and Safety of Your Staffs in Compliance with ISO 45001 (CPD0657)5 June 2021 (Sat); 9:30am - 5:00pm; HK$1,600 (HK$1,300 for HKIE Members)
Enhancing Business Efficiency and Effectiveness with LEAN (CPD0658)9 June 2021 (Wed); 9:30am - 5:00pm; HK$1,600 (HK$1,300 for HKIE Members)
Accelerating Your Business' Growth with Six Sigma (CPD0662)21 June 2021 (Mon); 9:30am - 5:00pm; HK$1,600 (HK$1,300 for HKIE Members)
Impactful Communication and Negotiation Skills (CPD0666)30 June 2021 (Wed); 9:30am - 5:00pm; HK$1,600 (HK$1,300 for HKIE Members)
Venue: Training Centre of TQM Consultants Co Ltd, 11/F, Lockhart Centre, 301 - 307 Lockhart Road, Wan Chai, Hong Kong
Registration: Please download the Enrolment Form from the HKIE website and return with a crossed cheque made payable to “TQM Consultants Co Ltd” to the Account Department, TQM Consultants Co Ltd, 11/F, Lockhart Centre, 301 - 307 Lockhart Road, Hong Kong, or direct payment to HSBC account number: 159-098045-838.
Enquiries: Training Department at Tel: 2569 2883 Fax: 2569 0108 Email: [email protected]
U-Safe Consultancy Workshop (Online CPD Course)
eLearning: How to Report Environmental Performance• 1 - 30 April 2021 (CPD0467)• 1 - 31 May 2021 (CPD0566)• 1 - 30 June 2021 (CPD0670)Any time; HK$1,200
eLearning: Introduction of Environmental Audit• 1 - 30 April 2021 (CPD0468)• 1 - 31 May 2021 (CPD0567)• 1 - 30 June 2021 (CPD0671)Any time; HK$1,200
eLearning: Assurance Techniques for Compliance with Health and Safety Rules• 1 - 30 April 2021 (CPD0469)• 1 - 31 May 2021 (CPD0568)• 1 - 30 June 2021 (CPD0672)Any time; HK$2,000
eLearning: How to Implement Sustainable Construction Practices • 1 - 30 April 2021 (CPD0470)• 1 - 31 May 2021 (CPD0569)• 1 - 30 June 2021 (CPD0673)Any time; HK$800
eLearning: How to Manage Environmental Aspects and Hazards • 1 - 30 April 2021 (CPD0471)• 1 - 31 May 2021 (CPD0570)• 1 - 30 June 2021 (CPD0674)Any time; HK$800
eLearning: Occupational Health and Hygiene Management Practices • 1 - 30 April 2021 (CPD0472)• 1 - 31 May 2021 (CPD0571)• 1 - 30 June 2021 (CPD0675)Any time; HK$2,500
eLearning: Transition Guidance in ISO 45001:2018 Occupational Health and Safety Management System • 1 - 30 April 2021 (CPD0473)• 1 - 31 May 2021 (CPD0572)• 1 - 30 June 2021 (CPD0676)Any time; HK$800
Registration: Registration via online training platform at http://www.procpdonline.com
Enquiries: Email: [email protected]
Notice: The H
KIE does not pre-approve any CPD activities/courses. In regard to the academ
ic requirements for m
embership of the H
KIE, please refer to the accredited programm
es listed in the HKIE w
ebsite.
April 2021 I Hong Kong Engineer 53
CLA
SSIFIED
Notice: The H
KIE does not pre-approve any CPD activities/courses. In regard to the academ
ic requirements for m
embership of the H
KIE, please refer to the accredited programm
es listed in the HKIE w
ebsite.
April 2021 I Hong Kong Engineer54
CLA
SSIFIED
Application Deadline30 April 2021
Building Services Engineering
Civil Engineering
Construction and Real Estate
Construction Law and Dispute Resolution
Environmental Management and Engineering
Facility Management
Fire and Safety Engineering
Geomatics (Geographic Information Systems)
Geomatics (Surveying)
High Performance Buildings
Project Management
Sustainable Urban Development
Urban Informatics and Smart Cities
Doctor of International Real Estate and Construction Programme (*hosted by the Department of Building and Real Estate)
屋宇設備工程學
土木工程學
建築及房地產學
建築法及爭議解決學
環境管理及工程學
設施管理
消防及安全工程學
測繪及地理資訊學 ( 地理資訊 )
測繪及地理資訊學 ( 測量 )
高效能建築
項目管理
可持續城市發展學
城市信息學及智慧城市
國際房地產及建築博士學位
Application Deadline2021/22 Admissions
Master of Science (MSc) / Postgraduate Diploma (PgD) Programmes
C
M
Y
CM
MY
CY
CMY
K
April 2021 I Hong Kong Engineer 55
GEN
ERA
L INFO
RM
ATIO
NTHE COUNCIL
OVERSEAS CHAPTER CHAIRMEN
COUNCIL MEMBERS (DIVISION) TEL FAX EMAILIr Leo H Y CHAN BASc(Comp) MBA MPA MHKIE 3509 8303 2869 6712 [email protected] Edward S C CHAN BSc(CVL&ENV) MSc(STL) CEng FHKIE 9259 2673 [email protected] MCSCE MICE PEng(Ont) RSE 1RSE(PRC) R.P.E.(CVL, STL) Ir CHAN Yiu Hon BEng(ELL) MHKIE 2195 3333 2991 4233 [email protected] CHEUK Kim Tang BEng(MCL) MSc(BSS) CEng CEM CEnv 2270 2975 [email protected] FCIBSE FIMechE LEED AP BEAM Pro REA R.P.E.(BSS, MCL) Ir Prof Joseph Duncan W J CHI Sr Dip(CVL) Hons Dip(CVL) 6031 9948 3007 3207 [email protected] MBA PhD(Engg Mgt) CEng FHKIE FHKICM FHKIHT FIStructE hkMICE RI RSA RSE RSO R.P.E.(CVL, STL) Ir Clement H W CHUNG BEng(MCL) MEngSc CEng FHKIE 2268 3695 2779 3362 [email protected] ATD MASHRAE REA R.P.E.(MCL) Ir Ian S P CHUNG BSc(Engg) MSc(Engg) FHKIE FICE NACE 3922 8989 3922 9797 [email protected] Specialist R.P.E.(CVL)Ir Prof Mark HAYMAN EMBA FHKIE FRAeS 2766 7599 [email protected] Prof Ken HO JP BSc MSc CEng FHKIE FICE R.P.E.(CVL, GEL) 2762 5158 2714 3565 [email protected] IP Tat Yan ECPt2 HD(ENS) MSc(Engg) CEng FHKIE MIEE 2843 3459 2810 0506 [email protected] Dr Ritz M H LAU HD Cert(AI) BSc MSc PhD CEng FHKIE 6840 6594 [email protected] Ir Prof Patrick P C LEE Dip(Productn & Ind Engg) 9302 3542 [email protected](Productn & Ind Engg) BBA MBA DBA FHKIE FCILT MCIPS CAQ SSBB RLSBBIr Ben C H LEUNG HD(CVL) BEng(CVL) FHKIE MIStructE AP 2973 5736 2526 3111 [email protected] Pro RI RSE R.P.E.(BUD, STL)Ir Prof Eddie H K LOCK BEng(ELL) MScEng(ELL&ENS) MBA 2182 2930 [email protected] CEng MHKIE FIET FInstMC BEAM ProIr Prof Joseph Y W MAK ECPt2 Assoc(STL) MSc(CVL) CEng 9269 8722 [email protected] FIStructE MICE 1RSEIr Prof Richard H Y SO BSc(ENS) PhD(Human Factors) CEng 2358 6961 2358 0062 [email protected] FHKES FIEHF SMAIAAIr Dr TSANG Kim Fung MEng PhD FHKIE MIEE 3442 7806 3442 0562 [email protected] Edmond P H TSE FSDSM DMS ProfDip(HRM) 6182 3908 2670 1111 [email protected](Public Policy & Mgt) FHKIE FIFireE
EX-OFFICIO MEMBERS Mr Daniel T S YIP HC(MCL) Dip(Mgt St) MSc(Proj Mgt) IEng 6380 2813 [email protected] MIGEM comIr Rachel H C NG BASc(CVL) CEng MHKIE MICE 9611 0103 [email protected]
CO-OPTED MEMBERSIr Ricky C K LAU BEng(CVL) FHKIE 2762 5000 2246 8708 [email protected] Simon S H NGO BSc(MCL) CEng FHKIE FIGEM 2963 1818 2516 7728 [email protected].(GAS)
OBSERVERSIr Prof Thomas K C CHAN MSc(BSS) CEng FHKIE FCIBSE 2579 8659 2856 9908 [email protected] FIET FIHEEM R.P.E.(BSS, ELL) Chairman of Engineers Registration Board Ir Dr The Hon LO Wai Kwok SBS MH JP BSc MSc MBA EngD 2539 0610 2539 0621 [email protected] FHKIE FHKEng FIET FIMechE R.P.E.(MIS)Representative of the Engineering Functional Constituency of the Legislative CouncilIr Ringo S M YU JP BEng(CVL) CEng FHKIE MICE MIStructE 2770 0122 2580 0470 [email protected].(CVL, GEL, STL) com.hkChairman of Engineering Forum
CHIEF EXECUTIVE AND SECRETARYIr HON Chi Keung 2895 4446 2577 7791 [email protected]
SECRETARIATThe HKIE 9/F Island Beverley, No 1 Great George Street, Causeway Bay, Hong KongTel: 2895 4446 Fax: 2577 7791 Website: http://www.hkie.org.hkEmail: [email protected]
PATRONTHE CHIEF EXECUTIVETHE HONOURABLE MRS CARRIE LAM CHENG YUET-NGOR, GBM, GBS
PRESIDENT TEL FAX EMAILIr Prof P L YUEN BScEng(MCL) MBA EngD FHKIE 2895 4446 2577 7791 [email protected] FIHEEM R.P.E.(BSS)
IMMEDIATE PAST PRESIDENTIr Ringo S M YU JP BEng(CVL) CEng FHKIE MICE MIStructE 2770 0122 2580 0470 [email protected].(CVL, GEL, STL) com.hk
SENIOR VICE PRESIDENTIr Edwin K F CHUNG BEng(CVL) MASc(GEL) FHKIE 2601 1000 2601 3988 [email protected].(CVL, GEL)
VICE PRESIDENTSIr Aaron K M BOK BSc(Eng) FHKIE FHKIHT R.P.E.(CVL) [email protected] Dr LEE Chi Hong BEng(MCL) HC(MCL) MSc(ENV Mgt) 2767 1888 2767 2000 [email protected](Tech Mgt) DBA CEng FHKIE FCIWEM FIMechE R.P.E.(BSS, ENV, MCL)
ELECTED ORDINARY MEMBERSIr CHAN Siu Hung JP BSc(Eng) MSc CEng MHKIE HonFEI 2678 8238 2678 8491 [email protected] CHEN Hao Ting MEng(MCL) MScEng(ENV) ACGI MHKIE 2594 6367 [email protected] Francis C Y CHENG BSc(Chemistry) FHKIE CChem 2814 3280 2508 9946 [email protected] Ir Albert T N CHENG BSc(Eng) MSc(Eng) LLB CEng FHKIE 2100 9002 2100 9003 [email protected] FHKIHTIr Jovian M C CHEUNG BEng(BSS) 9166 0001 2890 6081 [email protected](Comp & INF Tech) CEng MHKIE MCIBSEIr Alice K T CHOW BSc MSc CEng FHKIE FAPM FHKIFM 2268 3601 2268 3975 [email protected] FIStructE ACIArb R.P.E.(CVL, STL)Ir Prof Adam S C CHOY MSc(STL) CEng FHKIE 2859 5483 2517 6107 [email protected](CVL) MIStructE RI RSE 1RSE(PRC) R.P.E.(STL) com.hkIr KONG Shui Sun BSc MBA MA(ArbDR) LLB FHKIE FCIArb 9023 2209 [email protected] Rupert K Y LEUNG DipIng BSc(Engg) CEng FHKIE MICE 2738 3808 2565 5561 [email protected] RGE R.P.E.(CVL, GEL, STL) comIr Mandy M Y LEUNG BEng(ELL&ENS) MSc(ELL&ENS) MBA 2678 6233 2678 6800 [email protected] CEng MHKIE MIETIr LEUNG Yiu Hong BEng(ELL) MHKIE 2808 3626 2882 1574 [email protected]. org.hkIr LIU Sing Pang ECPt2 Assoc(CVL&STL) FHKIE MIStructE 2272 3198 2375 3655 [email protected] Victor K Y LO Dip(Mgt Studies) BSc(CVL) FHKIE 9082 9265 [email protected] Eric S C MA GBS JP Dip(STL) HD(STL) BScEng(CVL) 2131 0600 3112 2638 [email protected] CEng FHKIE FCIHT FICE FIStructE R.P.E.(CVL, STL) com.hkIr MAK Ka Wai BBS DipHE(Delft) BScEng(CVL) MA(ADR) 9102 5231 [email protected] Barrister FHKIE MICE MIEAust 2761 1185Ir Eagle C Y MO BEng(BSS) MSc(BSS) MHKIE FACSD FSOE 3563 7003 3563 7018 [email protected] BEAM Pro BEEF-QSP GBL Manager REA comR.P.E.(BSS) Ir Bobby M T NG BBS BSc(Engg) CEng FHKIE MCIWEM 9102 7525 2519 0084 [email protected] MIEAustIr Michelle M S TANG BEng(CVL w/ Architecture) 3922 9265 2328 6802 [email protected](Anthropology) MHKIE R.P.E.(CVL) com.hkIr TANG Whai Tak MEng(Hons) ACGI MPA CEng MHKIE 3718 6828 3718 6800 hkie.taktang@gmail. comMICE Ir Wilson S K TSANG Assoc(BSS) MSc(BSS) MSc(Mgt) 9410 4130 tsangskwilson@gmail. DIC(Mgt) CEng FHKIE MCIBSE R.P.E.(BSS, FRE) com
AUSTRALIAN CHAPTERIr YEUNG Mai MaiTel: 61 414 242 072Email: [email protected]
CANADIAN CHAPTERIr Brian LEETel: 905 477 7000x7507 Fax: 905 479 7773Email: [email protected]
UK CHAPTERIr Joanne H C CHAUEmail: [email protected]
Environmental Ir Prof Irene M C LOTel: 2358 7157 Fax: 2358 1534Email: [email protected] Ir Paul Y C CHANTel: 2968 1822 Fax: 2968 0072Email: [email protected] Edmond W M FONGTel: 2765 5604 Fax: 2392 7422Email: [email protected] Ir Prof Ken HOTel: 2762 5158 Fax: 2714 3565Email: [email protected] Ir Prof LEUNG Kwong SakTel: 3943 8492 Fax: 2603 5024Email: [email protected] & Transportation Ir Prof WONG Sze ChunTel: 2859 1964 Fax: 2559 5337Email: [email protected], Industrial & SystemsIr CHAN Sin WingTel: 2414 0456 Fax: 2412 1743Email: [email protected] & Naval Architecture Ir CHAN Ming YauTel: 2852 4409 Fax: 2854 9416Email: [email protected]
Materials Ir Prof Joseph Y W MAKTel: 9269 8722Email: [email protected] Ir Steven K H LAITel: 2565 3150 Fax: 2811 3321Email: [email protected] Ir NG Kin ShingTel: 3842 3010Email: [email protected]
AP/RSE/RGE CommitteeIr Dr LAU Chi KeungTel: 2891 8359 Fax: 2834 5887Email: [email protected] Associate Members CommitteeMr Daniel T S YIPTel: 6380 2813Email: [email protected] Specialist CommitteeIr Simon H C TSUITel: 2678 6874 Fax: 2678 7350Email: [email protected] Members CommitteeIr Rachel H C NGTel: 9611 0103Email: [email protected]
Building ServicesIr Philip K S CHANTel: 2372 8944 Fax: 2513 1828Email: [email protected] Dr YAU Yiu HungTel: 9193 3387Email: [email protected] Ir Eric K L CHANTel: 9045 5571Email: [email protected], Automation & InstrumentationIr Prof Louis F S LOCKTel: 9621 3703Email: [email protected] Ir Dr Edward W C LOTel: 2766 6144 Fax: 2330 1544Email: [email protected] KWOK Wai ShunTel: 2814 3269 Fax: 2580 9280Email: [email protected] Ir Walter T K AUTel: 2611 4500 Fax: 2611 4600Email: [email protected]
DIVISION CHAIRMENAircraftIr CHAN Wai KeungTel: 2305 8350 Fax: 2753 9327Email: [email protected] Dr LI Chi KwongTel: 6565 3392Email: [email protected] LAI Wai WahTel: 2859 5466 Fax: 2517 6107Email: [email protected] ServicesIr YEE Kwong FaiTel: 9172 8288Email: [email protected] Paul C F CHANTel: 6370 8129Email: [email protected], Automation & InstrumentationIr LEUNG Chun SingTel: 2814 3683 Fax: 2871 0645Email: [email protected] TAM Wing ShingTel: 9170 0331Email: [email protected]
ElectronicsIr John K W CHANTel: 2678 6080 Fax: 2678 7250Email: [email protected] Dr Anthony Y W MATel: 2788 5613 Fax: 2788 5608Email: [email protected] Dr TSUI Suk ChongTel: 2688 1071 Fax: 2688 0460Email: [email protected] & EnergyIr Dr Simon W K CHANTel: 2106 5655Email: [email protected] NG MaureenTel: 2528 6217 Fax: 2865 2657Email: [email protected] TechnologyIr Dr George L W SZETel: 2881 8113 Fax: 2881 8043Email: [email protected] & Transportation Ir Prof WONG Sze ChunTel: 2859 1964 Fax: 2559 5337Email: [email protected], Industrial & SystemsIr Dr LIU Sai LokTel: 2836 1003 Fax: 2591 4772Email: [email protected]
MaterialsIr Prof Joseph Y W MAKTel: 9269 8722Email: [email protected], Marine, Naval Architecture & ChemicalIr Albany W I TAMTel: 2268 3300 Fax: 2865 6493Email: [email protected] LAM Chun ManTel: 2993 8507 Fax: 2993 7749Email: [email protected] LAM King KongTel: 2129 3956 Fax: 3152 2056Email: [email protected]
DISCIPLINE REPRESENTATIVESAircraftIr Johnny L C YEETel: 2305 8266 Fax: 2753 9327Email: [email protected] POON Kwok YingTel: 2808 3645 Fax: 2157 0107Email: [email protected] Prof Adam S C CHOYTel: 2859 5483 Fax: 2517 6107Email: [email protected]
*
*#
*
**
*
*
**#
*
DIVISION CHAIRMEN & DISCIPLINE REPRESENTATIVES
* Members of the Executive# In dual capacity
LEGC
O N
EWS
April 2021 I Hong Kong Engineer56
Visited East Rail Line new signalling system and nine-car trainsOn 4 February 2021, together with some other LegCo Members, I visited East Rail Line to understand design features of the new nine-car trains. On 6 February 2021, the new signal system and new trains of the East Rail Line of the MTR Corporation were put into operation.
Raised a question on members of public flocking to countryside amid epidemicAt the Council meeting on 3 February 2021, I raised a question on members of public flocking to countryside amid epidemic. Due to the number of visitors to the countryside has been increasing incessantly, there are concerns on public health and hygiene problems such as the spread of the epidemic disease and the accumulation of rubbish left by visitors. For my question and Government’s reply, please visit the website at https://www.info.gov.hk/gia/general/ 202102/03/P2021020300480.htm?fontSize=3
Funding projects approved in the PWSC and the FCOn 24 February 2021, the Public Works Subcommittee (PWSC) approved a funding request of HK$2.5 billion for site formation and infrastructure works for public housing developments at Tseung Kwan O. The projects together with the others would be forwarded to the Finance Committee (FC) for final funding approval.
On 19 February 2021, the FC approved an additional funding of HK$1.5 billion to cover the cost of the works required for the design and construction of the Hong Kong-Zhuhai-Macao Bridge Main Bridge. Another allocation of HK$0.2 billion was approved to enhance the existing facilities of the Public Health Laboratory Centre.
Urged the Government to conduct a comprehensive transportation strategy studyAt the Chief Executive (CE) question-and-answer session on 5 February 2021, I asked the CE if the Government will speed up implementation of the seven new railway projects in a way that infrastructure drives community development. For my question and Government’s reply, please visit the website at https://www.info.gov.hk/gia/general/202102/04/P2021020400506.htm
Visited the M+ Museum construction site in the West Kowloon Cultural DistrictOn 11 February 2021, together with the CE and Government officials, I visited the construction site of the M+ Museum in the West Kowloon Cultural District to learn more about the anti-epidemic measures implemented by the contractor at the site. The measures include body temperature checks and the presentation of negative virus test results at the entrance, as well as the adoption of social distancing and cleaning and disinfection measures at the canteen and workers’ rest areas. The construction site also takes part in the testing programme rolled out by the Construction Industry Council and the Hong Kong Construction Association, in which a private testing agency has been
Room 709, 7/F, Legislative Council Complex, 1 Legislative Council Road, Central,Hong KongTel: 2539 0610 Fax: 2539 0621 Email: [email protected]: http://www.irdrwklo.hk
Responses to the Budget 2021-22The Financial Secretary delivered the Budget 2021-22 on 24 February 2021. I am pleased that the Budget had adopted many of the suggestions of mine, in particular those regarding HK$5,000 electronic consumption vouchers, providing subsidy for Real Estate Investment Trusts to list in Hong Kong, subsidising drainage repair works in old buildings, reviving local group tours, etc.
WK Lo's LegCo Express
Ir Dr The Hon Lo Wai KwokRepresentative of the EngineeringFunctional Constituency of the Legislative Council
arranged to provide a specimen collection service for workers at construction sites.
Urged the Government to relax cross border travel with vaccination record On 23 February 2021, together with some other members from LegCo and the business sector, I urged the Government to allow holders of certifications of negative result of the nucleic acid test on COVID-19 after vaccination to be exempted from compulsory quarantine when they travel from Hong Kong to the Mainland. The “Vaccination Pass” can provide incentives for Hong Kong citizens to participate in the vaccination programme, and help restart economic and trade flow between two places.
Visited the Ocean Park Together with other members of the Panel on Economic Development, I visited the Ocean Park on 20 February 2021 to better understand the proposed way forward of the Park. We visited the existing facilities of the lower park area and upper park area including Aqua City Lagoon and Ocean Park Tower. We were briefed on the proposed way forward of the Park as well as the financial arrangements. The group also visited the Water World, which will open this summer, to learn about its features.