bags and technical equipment - Bikemate.net

EXPLORE. ENJOY.

givimoto.com

BAGS AND TECHNICALEQUIPMENTAPPLICATION CHART - FEBRUARY 2019

GIVI EXPLORERTHE WORLD AS SEEN

ON TWO WHEELS

The will to uniteall passionate biketravellers under one sky,driven by the enthusiasmof sharing the excitement lived during our trips all over the world.

This is what brought usto launchWWW.GIVI EXPLORER.COM,the web portal for those who never stop exploring the planet and experiencing differentcultures and people…

INDEX

HARD BAGS

SOFT BAGS

ACCESSORIES

AIRSTARS & SPOILERS

MECHANICAL PART PROTECTION

SPECIFIC EQUIPMENT FOR BIKES AND SCOOTERS

SPARE PARTS & DISPLAYS

p. 4

p. 36

p. 70

p. 90

p. 96

p. 99

p. 192

1EXPLORE. ENJOY.

THE COMPANYThe Company GIVI was founded in 1978 by an intuition of Giuseppe Visenzi, a talented rider during the sixties in several World Championship categories, and very soon it became a leading company in the sector of motorcycle accessories.

In a very short space of time, the success of its products crossed both national and international boundaries thanks to the passion and the enterprising ability of its founder who was assisted with great care and determination by a team that has been continually able to think of and realise new products. The constant research carried out with the aim of developing materials and the use of new production technologies has been particularly decisive.

The result is now a range of accessories that are not only accessories, but proper accompaniments to motorcycles, efficient, technologically advanced

and always with a new and winning design. GIVI, whose production facilities and Headquarters are located in Flero, in the industrial heartland of Brescia, is now able to offer its products in more than 50 Countries, with direct branches in France, UK, Spain, Germany, Tunisia, USA, Brazil, Malaysia, Cina, Vietnam and Indonesia. This widespread diffusion makes it possible to satisfy the needs of every motorcyclist everywhere in the world.

GIVI boasts a production site that covers an area of over 30,000 sq mtrs, with a staff count of more than 150 employees, that take great care in all phases of production, from research / product planning to distribution, and having the ability to make use of the most modern technologies available, in order to achieve production responding to market requests characterized by a high technological content.

GIVI in the world

ALGERIAANGOLAARGENTINAAUSTRALIAAUSTRIABELGIUMBERMUDABOLIVIABRAZILBULGARIACANADACHILECHINACOLUMBIACOSTA RICACROATIACYPRUSCZECH REPUBLICDENMARKESTONIAFINLANDFRANCEGERMANYGUATEMALAGREECEHOLLANDHONG KONGHUNGARYICELANDINDIAINDONESIAISRAELITALY HEADQUARTERS

JAPANKUWAITLATVIA

LEBANONLITHUANIALUXEMBOURGMACEDONIAMALAYSIAMALTAMEXICOMONTENEGRONEW ZEALANDNORWAYPANAMAPHILIPPINESPOLANDPORTUGALROMANIARUSSIASERBIASINGAPORESLOVAKIASLOVENIASPAINSOUTH AFRICASOUTH KOREASWEDENSWITZERLANDTAIWANURUGUAYTHAILANDTUNISIATURKEYUKRAINEUNITED KINGDOMVENEZUELAUSAVIETNAM

HEADQUARTERS

PRODUCTION PLANT

R&D CENTER

COMMERCIAL BRANCH

DISTRIBUTION HEADQUARTERS - R&D CENTER

2

MADE IN ITALYGIVI placed all manufacturing units and the main logistic warehouse within a few kilometers radius from the Headquarters in Flero (Brescia). A total of more than 150 trained employees work here, setting up and monitoring the work of advanced tools and production machinery.

GIVI is a strong believer in automation. It’s our highly skilled technicians who ultimately refine, assemble, polish and check the coupling of each and every product, ensuring optimum quality.

Today just a few Italian companies are structured to follow the true concept of bringing “Made in Italy” quality to the international market; GIVI is among those.

QUALITY CONTROLOne of our strongest assets is the pursuit of a quality standard that can greatly elevate the riding comfort and safety of motorcyclists.

This is GIVI’s mission. A commitment made possible by teamwork, based on responsible product development and great respect for the end user.

GIVI employs the best available technology to offer ease of use, safety and emotional involvement, turning the brand into a lifestyle. Composite techno fibres, exclusive techno polymers, complex molds, high precision machinery and injection processes, strict quality controls, products, shapes, details and ever new destinations of use testify the total dedication of the brand to the consumers’ needs.

MANUFACTURINGThe manufacturing and plastic injection centre is also located in the city of Flero. Here the polymers, the raw material used to manufacture the hard side and top cases, are blended to GIVI’s specifications. After strict quality control they are conveyed to the automated injection press line. The unfinished products are then processed by anthropomorphic robots that complete the main assembly stages. In a nearby area the latest generation CNC mills cut the molds. In the final stage, all the molds are manually checked to assure the perfect alignment of their components.

All metal parts are manufactured in the metal works facility, also located in Flero. CNC mills cut, bend, weld and machine the metal with the highest precision. Every single piece composing our motorcycle fitting kits for side and top cases comes from this facility. The laser cutting of the metal sheets allows absolute dimensional precision, within a 0.1 mm tolerance.

THE R&D DEPARTMENTThe need for a technical office has been a GIVI priority since the very beginning. The decision to turn it into a fully independent R&D Department was finalized when the company entered the motorcycle helmet sector as a manufacturer. The R&D Department is the pride of GIVI: inside its offices a full team of technicians, designers and engineers follow new projects through every single stage.

A second, smaller but fully equipped R&D Department works on the projects aimed toward the South Asian market. This unit is located inside the manufacturing unit of GIVI Malaysia, however all the main ideas and innovations fielded mostly during the last 10 years by the brand, were born in Flero. This is a very important area composing of a light and airy, open “thinking” space, and a helmet testing lab.

3EXPLORE. ENJOY.

Attention: this case can ONLY be mounted with the side-case holder PL_ _ _CAM / PLR_ _ _CAM.MONOKEY® CAM-SIDE

MONOKEY®

TREKKER OUTBACK 58 TREKKER OUTBACK 42 TREKKER DOLOMITI 46 TREKKER DOLOMITI 30

58 ltr. top case, aluminium 42 ltr. top case, aluminium 46 ltr. top case, aluminium Valigia in alluminio, 30 lt

TREKKER 52 V56 MAXIA 4 V56NN MAXIA 4 V47

52 ltr. top case, black with aluminium finish 56 ltr. top case, black with aluminium finish 56 ltr. top case, black with carbonpattern finish

47 ltr. top case, black with aluminium finish

V47NN V46 E460 V40

47 ltr. top case, black with carbonpattern finish

46 ltr. top case, black 46 ltr. top case, black 40 ltr. top case, black

TREKKER 46 TREKKER 33 TREKKER DOLOMITI 30 E22 E360

Black case with aluminium finishand top opening, 46 ltr

Black case with aluminium finishand top opening, 33 ltr

30 ltr. side case, aluminium Pair of black panniers, 22 ltr. 36 ltr. black case

TREKKER OUTBACK 48 TREKKER OUTBACK 37

Trekker Outback aluminium side-case, 48 ltr (left-side or right-side)

Trekker Outback aluminium side-case, 37 ltr (left-side or right-side)

MONOKEY®

TOP CASES

SIDE CASES

SIDE CASES

4

HARD BAGS HARD BAGS

RETRO-FIT

FIXED

MONOLOCK®

B47 BLADE E470 SIMPLY III E450 SIMPLY II B37 BLADE E370

47 ltr. top case, black 47 ltr. top case, black 45 ltr. top case, black 37 ltr. top case, black 37 ltr. top case, black

B360 B34 E340 VISION B330

36 ltr. top case, black 34 ltr. top case, black 34 ltr. top case, black 33 ltr. top case, black

B32 BOLD E300N2 B29 B27

32 ltr. top case, black 30 ltr. top case, black 29 ltr. top case, black 27 ltr. top case, black

TREKKER DOLOMITI 36

Pair of aluminium side cases, 36 ltr

TREKKER OUTBACK ATV FOR BICYCLES FOR BICYCLES

110 ltr. top case, aluminium 25 ltr. top case for bicycle 14 ltr. top case for bicycle

SIDE CASES

TOP CASES

TOP CASES

Attention: this case can ONLY be mountedwith the side-case holder PLX / PLXR.MONOKEY® SIDE

V37 V37NN V35

Pair of side-cases, black, with central insert painted matt silver and red reflectors, 37 ltr

Pair of side-cases, black, with Carbon Look inserts and red reflectors, 37 ltr

Pair of black panniers, 35 ltr

SIDE CASES

5EXPLORE. ENJOY.

HARD

BAG

S

HARD BAGSMONOKEY® SYSTEMMonokey®, patented by GIVI, is the most widespread fitting system for hard cases and side cases. Simple to use, Simple to use, it allows the opening of the top case lid and the detachment of the case from the fitting plate with just one key. All the Monokey® products combine the best characteristics of mechanical resistance and rigidity of the fitting, with features including compact and light components. The even distribution of the load on the plate surface is guaranteed by the three fitting points. The damping of oscillation and vibration and the contact between the bottom shell and the plate are assured by four spacers made of elastic material, which is particularly resistant to extreme weather and temperature variation. Thanks to these solutions a high level of reliability of the fitting is guaranteed.

In order to offer a wider range of applications and uses, GIVI has introduced Monolock®. Following the same philosophy that defines the Monokey® fitting system; this second solution is mostly made for lighter vehicles, such as scooters and maxi-scooters. Even with limitations of maximum load, this system of fitting combines performances comparable to those of the Monokey® system with components boasting lighter and far smaller dimensional restrictions. Because of its natural compatibility with different kinds of motorcycles, it is appreciated by the most important brands of motorcycle producers, who have adopted it for their original accessories. As well as for Monokey®, the opening of the case top shell and the detachment of the case from the plate are operated with just one key.

MONOLOCK® SYSTEM

RETRO-FIT is the new mounting system that opens new opportunities for the rider, allowing him to attach a set of aluminum Trekker Dolomiti side cases to any existing PL and PLR mounts, originally designed for Monokey® cases. With this quick and secure adapter, it takes seconds to attach and detach the cases, without using any tools: the bottom part slides over the prongs on the bracket, while the top part is secured using two quick release fasteners, that fit to the included support which replaces the standard Monokey® locking wedge.

RETRO-FIT SYSTEM

The Trekker Outback are cases especially created for off-road use. To support all the demands of off-road travel, a fitting system and side-case holders stronger than standard Monokey are required. For this reason, the new Monokey Cam-Side system has been developed which fixes the case in four different points whilst at the same time maintaining the possibility to be released quickly from the rack. The specific side-case holders are the PL_ _ _CAM and PLR_ _ _CAM that are manufactured using tubular steel with an 18 mm diameter, and are fixed to the bike in different points, in order to strengthen the structure. Besides the panel of the frame where the case is linked, it is better if the rubber support points are moved in the perimetric zones of the case.

MONOKEY® CAM-SIDE SYSTEM

Introduced to the market in 2006, the Monokey® Side attaches onto the side of the above-mentioned two fitting systems, and thereby introducing different fitting solutions for the motorcyclist. Patented by GIVI, Monokey® Side represents an interesting evolution of the classic system constituted by the “fitment Kit plus the side-bag”. The new solution introduces new advanced technical features and some other points of interest: the cases that adopt Monokey® Side can be recognized by the shaped profile of the base and by the addition of two new fixing points, composed by “sleds”. The latter receive the disengagement movement from the case release button and determine a significant and further increase in overall stability. Monokey® Side allows greater adhesion of the case to the side of the motorcycle, improving the aerodynamic aspect. The motorcyclist’s habits won’t change, since it will continue to open/close and attach/detach the case equipped with Monokey® Side with one key and push button.

MONOKEY® SIDE SYSTEM

6

HARD BAGS

7EXPLORE. ENJOY.

HARD

BAG

S

FIXED SYSTEM TREKKER OUTBACK ATV 110 LTR

TREKKER OUTBACK ATV 110 LTROBK110A Trekker Outback natural aluminium top-

case for ATV, 110 ltr

OPTIONALS351 Pair of Trekker Strap belts, maximum

traction load 75 kg.

UT804Waterproof Cargo bag, 80 ltr. Aimed at both road Enduro bikes and Touring motorcycles

OBK110KITUniversal fitting kit for mounting the OBK110 on the carrier of ATV with a diameter steel tube of between 18mm and 25 mm

E162 Support in stainless steel for thermal flaskSTF500S Stainless-steel thermal flask, 500ml

info

20 kg 110 lt890

375

420

optional

S351 UT804 E162 STF500S

8

HARD BAGS

s = Item available until it runs out of stock

TREKKER OUTBACK 48 LTR

info

10 kg 48 lt495

387

306

optional

T507 UT807B GRT702 EA120

E143 E144 E145 E146

E148 TAN01 E162 STF500S

TREKKER OUTBACK 48 LTR 2018* OBKN48AL Left/Right-side Trekker Outback natural

aluminium side-case, 48 ltr* OBKN48AR

Left/Right-side Trekker Outback natural aluminium side-case, 48 ltr

* OBKN48APACK2

Pair of Trekker Outback natural aluminium side-cases, 48 ltr, with matching lock cylinders plus a third matching lock cylinder to be mounted in a suitable separate top-case

* OBKN4837APACK2

Pair of side-cases Trekker Outback in natural aluminium. 1 OBKN48AL (left) and 1 OBKN37AR (right) with matching lock cylinders plus a third matching lock cylinder to be mounted in a suitable separate top-case

* OBKN48BL Trekker Outback Black Line, aluminium side-case matt black, painted, 48 ltr

* OBKN48BR

Trekker Outback Black Line, aluminium side-case matt black, painted, 48 ltr

* OBKN48BPACK2

Pair of Trekker Outback Black Line, aluminium side-case matt black, painted, 48 ltr, with matching lock cylinders plus a third matching lock cylinder to be mounted in a suitable separate top-case

* OBKN4837BPACK2

Pair of Trekker Outback Black Line, aluminium side-case matt black, painted, 1 OBKN48BL (left) and 1 OBKN37BR (right) with matching lock cylinders plus a third matching lock cylinder to be mounted in a suitable separate top-case

OPTIONALUT807B Expandable cargo bag water resistant, 20 ltrEA120 Waterproof cargo bag 15 ltr.GRT702 s Cylindrical, waterproof cargo bag, 20 ltrE143 Additional padded handles

E144 Elastic carrying net, anchorable to the hinges predisposed on the lid

E145Pair of reflective serigraphed stickers, to fit on the rear side of the Trekker Outback and Trekker Dolomiti. Dimensions 205 x 45 mm

E146Set of 3 protective adhesive rubbers for Trekker Outback covers. Dimensions 280 x 20 mm (2 pieces) + 350 x 20 mm (1 piece)

E148 Removable support in stainless steel to mount the tank TAN01

TAN01 Homologated Jerry can 2.5 ltr suitable for the transportation of fuel, water or oil.

T507 Waterproof inner bag 45 ltr for Trekker Outback 48 ltrE162 Support in stainless steel for thermal flaskSTF500S Stainless-steel thermal flask, 500ml* Attention: this case can only be mounted with the side-case holder PL_ _ _CAM / PLR_ _ _CAM. Opening the lid completely could possibly be impeded by the presence of a top-case or by parts of the bike. If this happens it is possi-ble to remove the lid using a specially provided mechanism on the case.

9EXPLORE. ENJOY.

HARD

BAG

S

TREKKER OUTBACK 37 LTR

info

10 kg 37 lt495

387

246

optional

T506 UT807B GRT702 EA120

E143 E144 E145 E146

E148 TAN01 E162 STF500S

TREKKER OUTBACK 37 LTR 2018* OBKN37AL Left-side Trekker Outback natural aluminium

side-case, 37 ltr* OBKN37AR

Right-side Trekker Outback natural aluminium side-case, 37 ltr

* OBKN37APACK2Pair of Trekker Outback natural aluminium side-cases, 37 ltr, with matching lock cylinders plus a third matching lock cylinder to be mounted in a suitable separate top-case

* OBKN4837APACK2

Pair of side-cases Trekker Outback in natural aluminium. 1 OBKN48AL (left) and 1 OBKN37AR (right) with matching lock cylinders plus a third matching lock cylinder to be mounted in a suitable separate top-case

* OBKN37BL Left-side Trekker Outback Black Line, aluminium side-case matt black, painted, 37 ltr

* OBKN37BR

Right-side Trekker Outback Black Line, aluminium side-case matt black, painted, 37 ltr

* OBKN37BPACK2

Pair of Trekker Outback Black Line, aluminium side-case matt black, painted, 37 ltr, with matching lock cylinders plus a third matching lock cylinder to be mounted in a suitable separate top-case

* OBKN4837BPACK2

Pair of Trekker Outback Black Line, aluminium side-case matt black, painted, 1 OBKN48BL (left) and 1 OBKN37BR (right) with matching lock cylinders plus a third matching lock cylinder to be mounted in a suitable separate top-case

OPTIONALUT807B Expandable cargo bag water resistant, 20 ltrEA120 Waterproof cargo bag 15 ltr.GRT702 s Cylindrical, waterproof cargo bag, 20 ltrE143 Additional padded handles

E144 Elastic carrying net, anchorable to the hinges predisposed on the lid


E146Set of 3 protective adhesive rubbers for Trekker Outback covers. Dimensions 280 x 20 mm (2 pieces) + 350 x 20 mm (1 piece)

E148 Removable support in stainless steel to mount the tank TAN01


T506 Waterproof inner bag 35 ltr for Trekker Outback 37 ltrE162 Support in stainless steel for thermal flaskSTF500S Stainless-steel thermal flask, 500ml* Attention: this case can only be mounted with the side-case holder PL_ _ _CAM / PLR_ _ _CAM. Opening the lid completely could possibly be impeded by the presence of a top-case or by parts of the bike. If this happens it is possi-ble to remove the lid using a specially provided mechanism on the case.

10

HARD BAGS


TREKKER OUTBACK 58 LT TREKKER OUTBACK 58 LT 2018

* OBKN58A Trekker Outback natural aluminium top-case,58 ltr

* OBKN58B Trekker Outback Black Line aluminium top-case, matt black painted 58 ltr

OPTIONALT512 Waterproof Inner bag for Trekker Outback 58 ltr.GRT703 s Cylindrical, waterproof cargo bag, 40 ltrS351 Pair of Trekker Strap belts, maximum traction load

75 kgE161 Inner elastic carrying net for OBK58 Trekker OutbackE162 Support in stainless steel for thermal flask.STF500S Stainless-steel thermal flask, 500ml

S410Universal Trolley Base for MONOKEY® top-cases. To be combined with a MONOKEY® fitting plate. Security Lock system

E172 Polyurethane backrest (black)* Cannot be fitted onto plates with an installed electrical contact for a stop light kit

optional

info

10 kg 58 lt555

323

454

TREKKER OUTBACK 42 LT TREKKER OUTBACK 42 LT 2018

*OBKN42A Trekker Outback natural aluminium top-case, 42 ltr*OBKN42B Trekker Outback Black Line aluminium top-case, matt

black painted 42 ltrOPTIONAL

T511 Waterproof Inner bag for Trekker Outback 42 ltr., Trekker Dolomit 46 ltr.

S351 Pair of Trekker Strap belts, maximum traction load 75 kgE162 Support in stainless steel for thermal flaskSTF500S Stainless-steel thermal flask, 500mlE148 Removable support in stainless steel to mount the tank

TAN01 on Trekker Outback casesTAN01 Homologated Jerry can 2.5 ltr suitable for the

transportation of fuel, water or oil.


E168 Inner elastic carrying netE173 Polyurethane backrest (black)* Cannot be fitted onto plates with an installed electrical contact for a stop light kit

optional

info

10 kg 42 lt409

323

454

T512 GRT703 S351 E161

E162 STF500S S410 E172

T511 S351 E162 STF500S

S410 E148 E168 E173

11EXPLORE. ENJOY.

HARD

BAG

S

DLM46 TREKKER DOLOMITIDLM46 TREKKER DOLOMITI

* DLM46A Trekker Dolomiti MONOKEY® case in a natural aluminium finish, 46 ltr

* DLM46B Trekker Dolomiti MONOKEY® case in a aluminium finish, matt black painted, 46 ltr

OPTIONALE164 Polyurethane backrest (black)T511 Waterproof Inner bagGRT702 s Cylindrical, waterproof cargo bag, 20 ltrS351 Pair of Trekker Strap belts, maximum traction load

75 kgE166 Inner elastic carrying netE162 Support in stainless steel for thermal flaskSTF500S Stainless-steel thermal flask, 500ml


E165 Nylon rack* Cannot be fitted onto plates with an installed electrical contact for a stop light kit

optional

info

10 kg 46 lt460

340

410

DLM30 TREKKER DOLOMITIDLM30 TREKKER DOLOMITI

*DLM30A Trekker Dolomiti MONOKEY® case in a natural aluminium finish, 30 ltr.

*DLM30B Trekker Dolomiti MONOKEY® case in aluminium finish, matt black painted, 30 ltr.

* Can be used as both a top-case (compatible with all Monokey plates), or as a side-case (compatible with PL_ _ _ and PLR_ _ _ side frames)

OPTIONALE164 Polyurethane backrest (black)S351 Pair of Trekker Strap belts, maximum traction load 75 kgGRT702 s Cylindrical, waterproof cargo bag, 20 ltrT514 Inner bag for DLM30 Trekker Dolomiti caseE166 Inner elastic carrying net for Trekker DolomitiE162 Support in stainless steel for thermal flaskSTF500S Stainless-steel thermal flask, 500mlS410 Universal Trolley Base for MONOKEY® top-cases. To be

combined with a MONOKEY® fitting plate. Security Lock systemE165 Nylon rack for DLM30 and DLM46 Trekker Dolomiti* Cannot be fitted onto plates with an installed electrical contact for a stop light kit

optional

info

10 kg 30 lt460

240

410

E164 E165 T511 S351

E166 E162 STF500S S410

E164 S351 E165 T514

E166 E162 STF500S S410

12

HARD BAGS


TRK52N TREKKER

TRK52N TREKKER* TRK52N 52 ltr top-case black with anodized

aluminium finish* TRK52B 52 ltr top-case black with aluminium finish,

matt black painted

OPTIONAL

T490T490 Inner bag for TRK52 Trekker top-case, made from padded and reinforced technical fabric.

UT807B Expandable cargo bag water resistant, 20 ltr

E125Four rings kit for T10N elastic net anchor. The rings must be anchored to the top-case by making four holes of ø10mm

E133S Backrest in polyurethane foam, covered in black synthetic leather with GIVI logo

T10N Elastic carrying net, black, 1 pieceS351 Pair of Trekker Strap belts, maximum

traction load 75 kg.E142B Metal rack (black) for TRK52S150 Universal small nylon rack


* Cannot be fitted onto plates with an installed electrical contact for a stop light kit

info

10 kg 52 lt600

460

315

optional

T490 UT807B E125 E133S

S351 E142B S150 S410

13EXPLORE. ENJOY.

HARD

BAG

S

TRK33N / TRK46N TREKKER

info 46 lt.

10 kg 46 lt526

411

310

optional

E118 E120B E125 T484B

T10N S351 E149 S410

info 33 lt.

10 kg 33 lt526

411

230

TRK46N TREKKER* TRK46N 46 ltr top-case black with anodized aluminium

finish with top opening* TRK46PACK2

Set of two TRK46N Trekker case with matching lock cylinders plus a third matching lock cylinder to be mounted in a suitable separate top-case

* TRK46B 46 ltr top-case black with aluminium finish, matt black painted, with top opening

* TRK46BPACK2

Set of two TRK46B Trekker case matt black painted with matching lock cylinders plus a third matching lock cylinder to be mounted in a suitable separate top-case

* TRK33N 33 ltr case black with anodized aluminium finish with top opening

* TRK33PACK2

Set of two TRK33N Trekker cases with matching lock cylinders plus a third matching lock cylinder to be mounted in a suitable separate top-case

* TRK33B 33 ltr top-case black with aluminium finish, matt black painted, with top opening

* TRK33BPACK2

Set of two TRK33B Trekker cases matt black painted with matching lock cylinders plus a third matching lock cylinder to be mounted in a suitable separate top-case

OPTIONALE118 Polyurethane backrest (black)

E120BMetal rack (black), smaller than the E120, it uses the same holes and allows the opening of the case for TRK46 / TRK33

E152 Metal rack (black), it does not allow the top opening of the case to be opened

S150 Universal small nylon rack

E125Four ring kit to anchor T10N elastic net. The rings must be anchored to the case by making four holes of ø10mm

T484BInner bag for Trekker cases TRK33 and TRK46, expanded it can be used in the TRK46 case, unexpanded the bag is adaptable to the TRK33 case.

T10N Elastic carrying net, black, 1 piece

S351 Pair of Trekker Strap belts, maximum traction load 75 kg.

E149 Support in stainless steel to mount the tank TAN01


E162 Support in stainless steel for thermal flaskSTF500S Stainless-steel thermal flask, 500ml


* Cannot be fitted onto plates with an installed electrical contact for a stop light kit

14

HARD BAGS


V56 MAXIA 4

V56 MAXIA 4

V56NV56 MAXIA4 56 ltr top-case, black with black cover, red reflectors and inserts in anodized aluminium

V56NTV56 MAXIA4 56 ltr top-case, black with black cover, smoked reflectors and inserts in anodized aluminium

V56NNV56 MAXIA4 56 ltr top-case with red reflectors, black cover and Carbon Look inserts

V56NNTV56 MAXIA4 56 ltr top-case with smoked reflectors, black cover and Carbon Look inserts

OPTIONALCV47_ _ _ Painted cover (standard and specific

colours)CV47N Black embossed coverT468B Inner bag for V56 Maxia 4, E55 Maxia 3

and E52 Maxia casesUT807B Expandable cargo bag water resistant,

20 ltrS351 Pair of Trekker Strap belts, maximum

traction load 75 kg.E159 Metal rack (black) for V56 / V47S150 Universal small nylon rack

E111Specific backrest for MONOKEY® top-case E55 MAXIA 3 / V56 MAXIA 4 covered with black/grey synthetic leather

** E160 Stop light with LED

E175NEW

Automatic opening kit Keyless 2.0 for V56 Maxia cases. It allows the opening of the suitcase through an app to be installed on your device, downloadable from the App Store and Google Play.


** This product is exempt from homologation in accordance with EU Regulation 168/2013. We invite you to check the existing legislation in your country.

Cover CV47_ _ _

Silver Gloss Black Red WhiteB913

Pearl WhiteB912

Yellow FluoG126

Painted with standard colours

info

10 kg 56 lt600

330

480

optional

CV47_ _ _ T468B UT807B E159

S150 E160 E175 S410

15EXPLORE. ENJOY.

HARD

BAG

S

V56 MAXIA 4 KEYLESS 2.0

V56 MAXIA 4 KEYLESS 2.0

V56NKL

V56 MAXIA4 56 ltr top-case, black with black cover, red reflectors and inserts in anodized aluminium, equipped with the Keyless 2.0 automatic opening system through an app to be installed on your device, downloadable from the App Store and Google Play

V56NTKL

V56 MAXIA4 56 ltr top-case, black with black cover, smoked reflectors and inserts in anodized aluminium, equipped with the Keyless 2.0 automatic opening system through an app to be installed on your device, downloadable from the App Store and Google Play

V56NNKL

V56 MAXIA4 56 ltr top-case with red reflectors, black cover and Carbon Look inserts, equipped with the Keyless 2.0 automatic opening system through an app to be installed on your device, downloadable from the App Store and Google Play

V56NNTKL

V56 MAXIA4 56 ltr top-case with smoked reflectors, black cover and Carbon Look inserts, equipped with the Keyless 2.0 automatic opening system through an app to be installed on your device, downloadable from the App Store and Google Play


colours)CV47N Black embossed coverT468B Inner bag for V56 Maxia 4, E55 Maxia 3 and

E52 Maxia casesUT807B Expandable cargo bag water resistant, 20 ltrS351 Pair of Trekker Strap belts, maximum

traction load 75 kg.E159 Metal rack (black) for V56 / V47S150 Universal small nylon rack

E111Specific backrest for MONOKEY® top-case E55 MAXIA 3 / V56 MAXIA 4 covered with black/grey synthetic leather

** E160 Stop light with LED


** This product is exempt from homologation in accordance with EU Regulation 168/2013. We invite you to check the existing legislation in your country.

Cover CV47_ _ _


Pearl WhiteB912

Yellow FluoG126


info

10 kg 56 lt600

330

480

optional

CV47_ _ _ T468B UT807B E159

S150 E111 E160 S410

16

HARD BAGS


V47

V47* V47N 47 ltr top-case black with anodized

aluminium finish and red reflectors

* V47NTV47 TECH top-case, 47 ltr, black with anodized aluminium finish and smoked reflectors

* V47NN 47 ltr top-case black with carbon pattern insert and red reflectors

* V47NNTV47 TECH top-case, 47 ltr black, with carbon pattern insert and smoked reflectors


colours)CV47N Black embossed coverE132 Specific remote control

E174NEW

Automatic opening kit Keyless 2.0 for V47, V40, B47 Blade, B37 Blade, B360 cases. It allows the opening of the suitcase through an app to be installed on your device, downloadable from the App Store and Google Play.


** E135 Stop light with LED for top-case MONOKEY® V47

T502Inner bag for V47, V46, E41 Keyless, E460, E360, E45, B47 Blade, E470 Simply III, E450 Simply II cases

E159 Metal rack (black) for V56 / V47S150 Universal small nylon rackS351 Pair of Trekker Strap belts, maximum



* Double pack. Price for single piece** This product is exempt from homologation in accordance with EU Regulation 168/2013. We invite you to check the existing legislation in your country.

Cover CV47_ _ _


Pearl WhiteB912

Yellow FluoG126


info

10 kg 47 lt590

320

450

optional

CV47_ _ _ E132 E134S E135

T502 E159 S150 S351

17EXPLORE. ENJOY.

HARD

BAG

S

V47 KEYLESS 2.0

V47 KEYLESS 2.0

* V47NKL

47 ltr top-case black with anodized aluminium finish and red reflectors, equipped with the Keyless 2.0 automatic opening system through an app to be installed on your device, downloadable from the App Store and Google Play

* V47NTKL

V47 TECH top-case, 47 ltr, black with anodized aluminium finish and smoked reflectors, equipped with the Keyless 2.0 automatic opening system through an app to be installed on your device, downloadable from the App Store and Google Play

* V47NNKL

47 ltr top-case black with carbon pattern insert and red reflectors, equipped with the Keyless 2.0 automatic opening system through an app to be installed on your device, downloadable from the App Store and Google Play

* V47NNTKL

V47 TECH top-case, 47 ltr black, with carbon pattern insert and smoked reflectors, equipped with the Keyless 2.0 automatic opening system through an app to be installed on your device, downloadable from the App Store and Google Play


colours)CV47N Black embossed coverE132 Specific remote controlE134S Backrest in polyurethane foam, covered in

black synthetic leather with GIVI logo** E135 Stop light with LED for top-case MONOKEY®

V47


E159 Metal rack (black) for V56 / V47S150 Universal small nylon rackS351 Pair of Trekker Strap belts, maximum



* Single pack.** This product is exempt from homologation in accordance with EU Regulation 168/2013. We invite you to check the existing legislation in your country.

Cover CV47_ _ _


Pearl WhiteB912

Yellow FluoG126


info

10 kg 47 lt590

320

450

optional

CV47_ _ _ E132 E134S E135

T502 E159 S150 S351

18

HARD BAGS


V46V46

* V46N 46 ltr top-case with black embossed cover and red reflectors* V46NT V46 TECH top-case, 46 ltr black with smoked reflectors

OPTIONALC46N Black embossed coverC46NL Paintable coverC46_ _ _ Painted Cover (standard colours)E95S Specific backrest covered with black synthetic leather

with GIVI logo.** E105S Stop light with LED for top-case V46 / V46 TechE106 Inner light for top-case V46E107B Metal rack (black) for V46S150 Universal small nylon rackS351 Pair of Trekker Strap belts, maximum traction load 75 kgT502 Inner bag for casesS410 Universal Trolley Base for MONOKEY® top-cases. To be

combined with a MONOKEY® fitting plate. Security Lock system* Double pack. Price for single piece** This product is exempt from homologation in accordance with EU Regulation 168/2013. We invite you to check the existing legislation in your country.

optional

C46_ _ _ E95S E105S E106

info Cover C46N

10 kg 46 lt555

310

440

WhiteB913

Silver


V40V40

* V40N 40 ltr MONOKEY® top-case black, with redreflectors

* V40NT 40 ltr MONOKEY® top-case black, with smoked reflectors

OPTIONALE131S Backrest in polyurethane foam, covered in black

synthetic leather with GIVI logoC40NL Paintable coverC40_ _ _ Painted Cover (standard colours)


E174NEW


* Double pack. Price for single piece

optional

E131S C40_ _ _ S410 E174

info Cover E131S

10 kg 40 lt530

340

440

Silver Gloss Black


19EXPLORE. ENJOY.

HARD

BAG

S

E460E460

* E460N 46 ltr top-case, black with red reflectors

OPTIONAL


E79 Polyurethane backrest (black)

** E92 Stop light with LED for MONOKEY® top-case E460


E81B Metal rack (black)S150 Universal small nylon rack


* Double pack. Price for single piece** This product is exempt from homologation in accordance with EU Regulation 168/2013. We invite you to check the existing legislation in your country.

optional

T502 E79 S150 S410

info

10 kg 46 lt567

312

423

E360E360

* E360N 40 ltr MONOKEY® top-case, 40 ltr, black with red reflectors

OPTIONAL



E81B Metal rack (black)S150 Universal small nylon rackE83 s Polyurethane backrest (black)* Double pack. Price for single piece / Cannot be fitted onto plates with an instal-led electrical contact for a stop light kit

optional

T502 S351 S150 E83

info

10 kg 40 lt567

423

280

20

HARD BAGS


E22E22

E22N Pair of panniers black

info

5 kg 22 lt470

370

225

V35V35

* V35N Pair of painted side-cases, black embossed with painted insert and red reflectors

* V35NT Pair of painted side-cases, black embossed with painted insert and transparent reflectors

OPTIONALC35N Pair of paintable covers for V35N in smooth ABSC35_ _ _ Painted Cover (standard colours)T443C Pair of soft inner bags for V35, V37 cases* Pair of cases with matching lock cylinders plus a third matching lock cylinder to be mounted in a suitable separate top-case. Attention: this case can only be mounted with the side-case holder PLX/PLXR.

optional

C35_ _ _ T443C

info Cover C35_ _ _

10 kg 35 lt526

394

316

Mat Silver Silver Gloss Black Pearl WhiteB912

BlackN913

Yellow FluoG126


21EXPLORE. ENJOY.

HARD

BAG

S

V37

V37

* V37NPair of side-cases, black, with central insert painted matt silver and red reflectors, 37 ltr

* V37NTPair of side-cases, black, with central insert painted matt silver and smoked reflectors, 37 ltr

* V37NN Pair of side-cases, black, with Carbon Look inserts and red reflectors, 37 ltr

* V37NNT Pair of side-cases, black, with Carbon Look inserts and smoked reflectors, 37 ltr

OPTIONALCV37_ _ _ Pair of painted cover (specific colours)T443C Pair of soft inner bags for V35, V37 cases* Attention: this case can only be mounted with the side-case holder PLX/PLXR.

info

10 kg 37 lt325

385

570

optional

CV37_ _ _ T443C

22

HARD BAGS


RETRO-FIT DLM36 TREKKER DOLOMITI

DLM36 TREKKER DOLOMITI* DLM36APACK2

Pair of 36 ltr natural aluminium cases plus a third lock cylinder, all with the same key.

* DLM36BPACK2

Pair of 36 ltr aluminium cases, matt black painted, plus a third lock cylinder, all with the same key.

OPTIONALT506 Waterproof inner bag 35 ltr for Trekker

Outback 37 ltrEA120 Waterproof cargo bag 15 ltr.UT807B Expandable cargo bag water resistant,

20 ltr

E144Elastic carrying net, anchorable to the hinges predisposed on the Trekker Outback lid and Trekker Dolomiti


E162 Support in stainless steel for thermal flaskSTF500S Stainless-steel thermal flask, 500ml* To be mounted on PL and PLR side-case holders. Opening the lid completely could possibly be impeded by the presence of a top-case or by parts of the bike. If this happens it is possible to remove the lid using a specially provided mechanism on the case.

info

10 kg 36 lt495

379

242

optional

T506 EA120 UT807B E144

E145 E162 STF500S

23EXPLORE. ENJOY.

HARD

BAG

S

B47 BLADE

Cover C47_ _ _

Silver Gloss Black BlackN913

Pearl WhiteB912

WhiteB913


E470 SIMPLY IIIE470 SIMPLY III

* E470N 47 ltr MONOLOCK® top-case SIMPLY (black embossed) with red reflectors, universal mounting plate included

* E4700N 47 ltr MONOLOCK® top-case SIMPLY (black) with red reflectors, universal mounting plate not included

* E470NS 47 ltr MONOLOCK® top-case SIMPLY (black) with red reflectors, universal mounting plate included, cover not included

* E470NT 47 ltr MONOLOCK® top-case SIMPLY (black embossed) with smoked reflectors, universal mounting plate included

OPTIONALC470N Black embossed coverC470_ _ _ Painted cover (standard and specific colours)** E94 Stop light with LEDE110 Polyurethane backrest (black)T502 Inner bagSL101 1 - Security lock set including cylinder, 2 keys, bush

and under lock platelets* Double pack. Price for single piece.** This product is exempt from homologation in accordance with EU Regulation 168/2013. We invite you to check the existing legislation in your country.

optional

C470_ _ _ E94 E110 T502

info Cover C470_ _ _

3 kg 47 lt555

325

425

Silver Gloss Black Pearl WhiteB912

WhiteB913


B47 BLADE* B47NML 47 ltr MONOLOCK® top-case (black) with red

reflectors, universal mounting plate included* B4700NML 47 ltr MONOLOCK® top-case (black) with red

reflectors, universal mounting plate not included* B47NTML 47 ltr MONOLOCK® top-case (black), with smoked

reflectors, universal mounting plate included* B4700NTML 47 ltr MONOLOCK® top-case (black), with smoked

reflectors, universal mounting plate not includedOPTIONAL

C47_ _ _ Painted cover (standard and specific colours)** E126 Stop light with LEDE132 Specific remote control


T502 Inner bag cases

E174NEW

Automatic opening kit Keyless 2.0. It allows the opening of the suitcase through an app to be installed on your device, downloadable from the App Store and Google Play

SL101 1 - Security lock set including cylinder, 2 keys, bush and under lock platelets

* Double pack. Price for single piece.** This product is exempt from homologation in accordance with EU Regulation 168/2013. We invite you to check the existing legislation in your country.

optional

C47_ _ _ E126 E131S E174

info

3 kg 47 lt570

340

445

24

HARD BAGS


E450 SIMPLY IIE450 SIMPLY II

* E450N45 ltr MONOLOCK® top-case (black embossed) with red reflectors, universal mounting plate included

* E4500N45 ltr MONOLOCK® top-case (black embossed) with red reflectors, universal mounting plate not included

OPTIONALE84 Polyurethane backrest (black)** E94 Stop light with LED




optional

E84 E94 T502 SL101

info

3 kg 45 lt555

325

415

B37 BLADEB37 BLADE

* B37N 37 ltr MONOLOCK® top-case (black) with red reflectors, universal mounting plate included

* B37NT 37 ltr MONOLOCK® top-case (black), with smoked reflectors, universal mounting plate included

OPTIONALC37_ _ _ Cover painted (standard and specific colours)E131 Polyurethane backrest (black)E132 Specific remote control** E126 Stop light with LED

E174NEW




optional

C37_ _ _ E131 E126 E174

info Cover C37_ _ _

3 kg 37 lt495

330

440

Pearl WhiteB912


25EXPLORE. ENJOY.

HARD

BAG

S

E370E370


* E370NS s 39 ltr MONOLOCK® top-case (black) with red reflectors, cover not included

* E370NT39 ltr MONOLOCK® top-case (black embossed) with smoked reflectors, universal mounting plate included

OPTIONALC370N Black embossed coverC370_ _ _ Painted Cover (standard and specific colours)** E108 Stop light with LEDE109 Polyurethane backrest (black)SL101 1 - Security lock set including cylinder, 2 keys,

bush and under lock platelets* Double pack. Price for single piece. ** This product is exempt from homologation in accordance with EU Regulation 168/2013. We invite you to check the existing legislation in your country.

optional

C370_ _ _ E108 E109 SL101


3 kg 39 lt480

324

415

Pearl WhiteB912

WhiteB913


B360B360

* B360N 36 ltr MONOLOCK® top-case black with red reflectors, universal mounting plate included

* B360NT 36 ltr MONOLOCK® top-case black with smoked reflectors, universal mounting plate included

OPTIONALC360_ _ _ Painted Cover (standard colours)E131S Backrest in polyurethane foam, covered in black

synthetic leather with GIVI logo

E174NEW



* Double pack. Price for single piece

optional

C360_ _ _ E131S E174 SL101


3 kg 36 lt495

340

440

Pearl WhiteB912

Gloss Black Silver


26

HARD BAGS


E340 VISIONE340 VISION


* E340NT34 ltr MONOLOCK® top-case (black embossed) with smoked reflectors, universal mounting plate included

OPTIONALE811 Polyurethane backrest (black)SL101 1 - Security lock set including cylinder, 2 keys,

bush and under lock platelets* Double pack. Price for single piece / Cannot be fitted onto plates with an instal-led electrical contact for a stop light kit

optional

E811 SL101

info

3 kg 34 lt485

305

415

B34B34

* B34NMAL Black MONOLOCK® top-case 34 ltr with red reflectors. Universal mounting plate included

* B34NTMAL

Black MONOLOCK® top-case 34 ltr with smoked reflectors. Universal mounting plate included

OPTIONALC34_ _ _ Painted Cover (standard colours)E132 Specific remote controlE131S Backrest in polyurethane foam, covered in black

synthetic leather with GIVI logoSL101 1 - Security lock set including cylinder, 2 keys,

bush and under lock platelets* Double pack. Price for single piece

optional

C34_ _ _ E132 E131S SL101

info Cover C34_ _ _

3 kg 34 lt425

340

455

Pearl WhiteB912

Silver Red


27EXPLORE. ENJOY.

HARD

BAG

S

B330 B330

B330N Black MONOLOCK® top-case 33 ltr with red reflectors.

B330NT Black MONOLOCK® top-case 33 ltr with smoked reflectors.

OPTIONALSL101 1 - Security lock set including cylinder, 2 keys,

bush and under lock platelets

optional

SL101

info

3 kg 33 lt436

314

440

B32 BOLD B32 BOLD

* B32NMAL Black MONOLOCK® top-case 32 ltr. Universal mounting plate included

OPTIONALSL101 1 - Security lock set including cylinder, 2 keys,

bush and under lock platelets* Double pack. Price for single piece / Not compatible with plate Monolock MM

optional

SL101

info

3 kg 32lt405

303

433

28

HARD BAGS


E300N2E300N2

* E300N2 30 ltr MONOLOCK® top-case (black), universal mounting plate included (with Micro 2 lock)

* E300NT230 ltr MONOLOCK® top-case (black embossed) with smoked reflectors, universal mounting plate included (with Micro 2 lock)

OPTIONALE103 Polyurethane backrest (black)SL101 1 - Security lock set including cylinder, 2 keys,

bush and under lock platelets* Multi pack (4). Price for single piece

optional

E103 SL101

info

3 kg 30 lt410

300

400

B29B29

* B29NBlack embossed MONOLOCK® top-case 29 ltr, with red reflectors, and universal mounting plate included

* B29NTBlack embossed MONOLOCK® top-case 29 ltr, with smoked reflectors, and universal mounting plate included

* Multi pack (4). Price for single piece

info

3 kg 29 lt407

309

399

29EXPLORE. ENJOY.

HARD

BAG

S

B27NMALB27NMAL

* B27NMAL 27 ltr MONOLOCK® top-case (black), universal mounting plate included

OPTIONALE132 Specific remote controlE147 Polyurethane backrest (black)SL101 1 - Security lock set including cylinder, 2 keys,

bush and under lock platelets* Double pack. Price for single piece

DESCRIPTION

MONO

KEY®

PLAT

ES

M9A NEW

MONOKEY® Plate. Made from aluminium 3 mm brushed and anodized aluminium, with the specific racks _ _ _ FZ or with the specific rear racks SR _ _ _ where expressly indicated

M9B NEW

MONOKEY® Plate. Made from black aluminium 3 mm brushed and anodized aluminium, with the specific racks _ _ _ FZ or with the specific rear racks SR _ _ _ where expressly indicated

M8AAnodized aluminium TREKKER RACK MONOKEY® plate to be combined with the specific racks _ _ _ FZ or with the specific rear racks SR _ _ _ where expressly indicated

M8BBlack anodized aluminium TREKKER RACK MONOKEY® plate to be combined with the specific racks _ _ _ FZ or with the specific rear racks SR _ _ _ where expressly indicated

M7MONOKEY® plate to be combined with the specific racks _ _ _ FZ or with the specific rear racks SR _ _ _ where expressly indicated. Painted cover in matt silver available as an optional extra

CM7A900Painted cover in matt silver for M7 plate. To be combined with the M7 plate (sold separately)

M5MONOKEY® plate to be combined with the specific racks _ _ _ FZ or with the specific rear racks SR _ _ _ where expressly indicated.

M35MONOKEY® plate with an aluminium joint included, to be combined with the specific rear racks _ _ _FL

M3MONOKEY® plate with an aluminium joint included, to be combined with the specific rear racks _ _ _F for the fitting of a MONOKEY® case

DESCRIPTION

E251Universal MONOKEY® plate including fitting kit to fit a case onto scooters or bikes with a rear rack already fitted

MONO

LOCK

® PL

ATES

M6MMONOLOCK® plate equipped with a space for a “U” type padlock. To be combined with the specific racks _ _ _ FZ or with the specific rear racks SR _ _ _ where expressly indicated

M5MMONOLOCK® plate to be combined with the specific racks _ _ _ FZ or with the specific rear racks SR _ _ _ where expressly indicated

MMMONOLOCK® plate with an aluminium joint included, to be combined with the specific rear racks _ _ _F for the fitting of a MONOLOCK® case

Z113C2 Plate + cover plate + MONOLOCK® kit

optional

E132 E147 SL101

info

3 kg 27 lt390

290

400

PLATES

DESCRIPTION

1000FUniversal rear rack for Monorack luggage carrier without plate and joint set (order M3 or MM plate)

MONORACK

30

HARD BAGS


KEY LOCKS SECURITY KEY LOCKS

SECURITY KEY LOCKSSL101 1 - Security lock set including cylinder, 2

keys, bush and under lock plateletsSL102 2 - Security Lock key set for 2 cases,

including bush and under lock plateletsSL103 3 - Security Lock key set for 3 cases,

including bush and under lock platelets

SL105

4 - Security Lock key set for 5 cases, including bushes. Only compatible with cases that are equipped with a Security Lock as standard. Can also be used in cases that are compatible with a Security Lock as an option, but it is important to purchase the corresponding under lock platelets

Z2400CNGR 5 - Blank key, with black handle (thickness 3 mm)

The security lock is available as an accessory.

It is supplied as standard in the following items:Trekker Outback - Trekker Dolomitri - Maxia 4 - Trekker 33/46/52 - V35 - V37 - V47 - V46 - V40 - S250 Tool Box - S410 Trolley rack - Borse da serbatio TanklockEd - GRT709

It is compatible with the following items: E470 Simply III - E450 Simply II - E370 - E340 Vision - E300N2 - E300NT2 - E260 - E230 - B360N - B360NT - B47 Blade - B37 Blade - B34N - B34NT - B330 - B330NT - B32 Bold - B27NMAL

The security lock is not compatible with the following items: E55 Maxia (antecedente al 2012) - E52 Maxia - E41 Keyless - E360 - E460 - E21 Cruiser - E22 - E36 - E45 - E300N - E300B - E30 Tour - B29 - CY14 - CY25

31EXPLORE. ENJOY.

HARD

BAG

S

KEY LOCKS KEY LOCKS STANDARD - REDKEY LOCKS STANDARD - RED

(COMPATIBLE WITH ALL MODELS OF CASES, EXCEPT THOSE EQUIPPED WITH A SECURITY LOCK)

Z227 1 - Set for 2 key locks with corresponding bush with red handle



Z140R 4 - Key locks with corresponding bush with red handle (thickness 2 mm)

Z661 5 - Key locks with corresponding bush with red handle (thickness 2.5 mm)

Z661G 6 - Blank key with red handle (thickness 2.5 mm)

KEY LOCKS KEY LOCKS STANDARD - SILVERKEY LOCKS STANDARD - SILVER

(COMPATIBLE WITH ALL MODELS OF CASES, EXCEPT THOSE EQUIPPED WITH A SECURITY LOCK)

Z227A 1 - Set for 2 key locks with corresponding bush with silver handle

Z228A 2 - Set for 3 key locks with corresponding bush with silver handle

Z661A 3 - Key locks with corresponding bush with silver handle (thickness 2.5 mm)

Z661GA 4 - Blank key with silver handle (thickness 2.5 mm)

32

HARD BAGS


FIXED SYSTEM CY14NCY14N

* CY14NTop-case, capacity 14 ltr, complete with red reflector, equipped with universal fitting kit for mounting onto a bicycle rack

* 4 pcs pack. Price for single piece

info

3 kg 14 lt306

222

330

FIXED SYSTEM CY25NCY25N

* CY25N sTop-case, capacity 25 ltr, complete with red reflector, equipped with universal fitting kit for mounting onto a bicycle rack

* 4 pcs pack. Price for single piece

info

3 kg 25 lt370

300

395

TOP-CASE FOR BICYCLE

33EXPLORE. ENJOY.

HARD

BAG

S

T514Inner bag for DLM30 Trekker Dolomiti caseFeatures:• Reflective inserts• External front pocket with zipper closure• Internal net pocket• 4 protective feet on the base• Handles with protective covering• Adjustable shoulder strap for easy transportation

Info

200

300

390

T443CPair of soft inner bags for V35, V37 cases, their shape makes them usable inside the V35, V37 MONOKEY® SIDE cases only.Equipped with two pockets at the front and rear of the main compartment, which open in exactly the same way as the case, to allow easy access to contents without removing the bag.Equipped with handles and a shoulder carrying strap.

HARD BAGS COMPLEMENTS

Info

440

290

270

T468BInner bag for V56 Maxia 4, E55 Maxia 3 and E52 Maxia cases.With padded handles and shoulder shoulder carrying strap.Equipped with a large frontal pocket and the opening of the main compartment allows easy access to contents without removing the bag from the case.

Info

10.2”14.2”8.

3”

34 s = Item available until it runs out of stock

HARD BAGS

T506Bag with rectangular base 35 ltr for Trekker Outback 37 ltr.It can be used on the lid of the top-case or as a saddle bag, fixing it with standard elastic straps.As standard:- Roll down closure system to ensure fully waterprooffunctionality- Air vent- Shoulder strap- Two tubular fluorescent yellow elastic straps, with hooks.

T502Inner bag for V47, V46, E41 Keyless, E460, E360, E45, B47 Blade, E470 Simply III, E450 Simply II cases.With padded handles and shoulder strap for carrying manually.It is equipped with a large frontal pocket suitable for laptop screens up to 13.4 inches.

T484BInner bag for Trekker cases TRK33 and TRK46, expanded it can be used in the TRK46 case, unexpanded the bag is adaptable to the TRK33 case.The frontal pocket allows access to the bag when the case is opened on the upper side only. The main compartment is equipped with a net bag with zip closure to maintain contents in a vertical position.The T484B can be comfortably used as a bag itself thanks to its sporty design, practical handles with padded grips and a removeable shoulder strap ensuring it can be easily carried manually.

T490Inner bag for TRK52 Trekker top-case, made from padded and reinforced technical fabric.Equipped with a large capacity pocket, reflective linings and shoulder strap.

Info

460

310

170>250

Info

19.6”10.6”13

.7”

Info

460

310

250

Info

210

330

450 35 lt

35EXPLORE. ENJOY.

HARD

BAG

S

T507Bag with rectangular base 45 ltr. For Trekker Outback 48 ltr.It can be used on the lid of the top-case or as a saddle bag, fixing it with standard elastic straps.As standard:- Roll down closure system to ensure fully waterprooffunctionality- Air vent- Shoulder strap- Two tubular fluorescent yellow elastic straps, withhooks..

Info

280

330

450 45 lt

T511Waterproof Inner bag for Trekker Outback 42 ltr., Trekker Dolomit 46 ltr.It can be used on the lid of the top-case or as a saddle bag, fixing it with standard elastic straps or optional Trekker Straps S350.

Info

360

240

370 38 lt

T512Waterproof Inner bag for Trekker Outback 58 ltr.It can be used on the lid of the top-case or as a saddle bag, fixing it with standard elastic straps or optional Trekker Straps S350.

Info

510

240

370 54 lt

SOFT BAGS SOFT BAGS

ULTIMA-T The ULTIMA-T series offers the best performance in terms of both protection and comfort, perfecting the use of mechanical and universal mounting systems for a series of extremely versatile and useful cargo solutions and is a range dedicated to the most demanding of motorcycle tourers. M.O.L.L.E. system (Modular Lightweight Load-Carrying Equipment) for universal attachment with the flexibility to be combined with other bags from the range.

UT801 UT802 UT803 UT804 UT805 UT806 UT807B

Waterproof dry-roll bag, 30 ltr

Waterproof backpack, 35 ltr Waterproof Cargo bag, 40 ltr Waterproof Cargo bag, 80 ltr Top bag, 35 ltr Top bag, 65 ltr Expandable cargo bag,25 ltr

UT808 UT809 TanklockED UT810 TanklockED

Waterproof side bags, 25 ltr on each side

TanklockED tank bag, 20 ltr

TanklockED tank bag, 25 ltr

METRO-T

A new line of semi-rigid bags, suitable for bikes with a classic frame, in a retro or café racer style. Thanks to the versatility of the models in the range, with medium - medium/small volumes and technical fabrics these bags are suitable for touring-urban use and therefore can be used with all bike models, from the classics, to more modern naked bikes.Materials: made in EVA, thermoformed and covered with Guzy600D and PU. All materials are developed in accordance with Reach regulations.

MT501 Multilock MT501S Multilock MT502 MT503 MT505 Tanklock

Pair of thermoformed Multilock side bags,18 ltr

Thermoformed single side bag Multilock side bags,18 ltr

Saddle bag that converts into a multi-function backpack, 30 ltr

Roll bag for front fork/tail, 4 ltr

Tanklock tank bag thermoformed, 5 ltr

GRT709 GRT710 GRT711 GRT714 GRT715 GRT716 GRT717 GRT718

Pair of side bags,35 ltr on each side

Portable pouch Backpack, 25 ltr Modular, cylindrical, waterproof cargo bag, 20 ltr

Waterproof tank baG with specific base for quick attachment/detachment, 20 ltr

Waterproof tank bag,10 ltr

Universal tool bag Pair of side bags waterproof (15 ltr on each side)

The Gravel-T is a new line of completely waterproof bags, produced for off-road and touring. Especially suitable for light bikes such as Enduro and Superbikes, this specific range aims to meet the needs of the off-road biker, thanks to its technical features designed for enduro use.

GRT701 GRT702 GRT703 GRT704

Waterproof compact backpack, 25 ltr

Modular, cylindrical, waterproof cargo bag, 20 ltr

Modular, cylindrical, waterproof cargo bag, 40 ltr

Waterproof bag, 3 ltr capacity.

36

SOFT

BAG

S

XSTREAM A sporty look from the express line for those not willing to compromise in terms of reliability and comfort. Materials: 1200D Guzy nylon. PU inserts. All materials will be developed in accordance with new Reach regulations except the main fabric of the new Xstream products which will be treated anti-UV.

XS307 Tanklock XS312 XS315 XS317 XS320 Tanklock XS5112E XS5112R

Tanklock tank bag, 15 ltr Tank bag, 25 ltr Tool case pockets for rear rack specific forBMW R1200GS (13>18) / R1250 GS (19)

Multi-task cargo rucksack, 30 ltr

Tanklock tank bag 15 ltr specificfor Honda CRF1000L Africa Twin(16-18) / Africa Twin Adventure Sports (18) / Kawasaki Versys 650 (15>18)

Pair of panniers for engine guard specific for BMW R1200GS Adventure (14>18)

Tool bag for rear rack specific for BMW R1200GS Adventure (14>18)

EASY-T The Easy-T range of motorcycle bags is a restyling of the “entry-level” Easy line and includes a wide range of bags for general touring. The materials used and the technical features designed for maximum efficiency, ensures high reliability of these bags, which are suitable for all 2-wheel users.

Materials: polyester 600D PU / PVC Tarpaulin, highlighted by high frequency stitchless seams for waterproof models. All materials are developed in accordance with Reach regulations ((CE) n. 1907/2006).

EA104B EA105B EA106B EA107B EA108B EA109B EA110B EA112B EA113B

Rucksack with helmet holder, 22 ltr

Tunnel bag for scooter, 15 ltr

Small-size universal tank-bag, 6 ltr

Seat roll-bag, 35 ltr Waist-bag Leg wallet Tank bag with specific base for Enduro bikes

Tablet holder for the tank

Leg wallet XL

EA114BK EA114KG EA114BY EA114BR EA115BK EA115KG EA115BY EA115BR

Waterproof cylinder bag30 ltr, black colour

Waterproof cylinder seat bag 30 ltr, khaki green colour

Waterproof cylinder seat bag 30 ltr, black andyellow colour

Waterproof cylinder seat bag 30 ltr, black and red colour

Waterproof cargo bag 40 ltr, black colour

Waterproof cargo bag 40 ltr, khaki green colour

Waterproof cargo bag 40 ltr, black and yellow colour

Waterproof cargo bag 40 ltr, black and red colour

EA116 EA117 Tanklock EA118 Tanklock EA119BK EA120 EA121 EA122 EA123 EA124

Tank bag, 15 ltr specific for Honda HONDA NC750 X (16>19)

Tanklock tank bag, 26 ltr

Tanklock tank bag, 35 ltr

Waterproof cargo bag 60 ltr, black colour

Waterproof cargo bag 15 ltr

Waterproof backpack, 18 ltr.

Tunnel/Seat bag, 23 ltr “Mini” TANKLOCK bag, 5 ltr.

Rucksack, 15 ltr

A line of semi-rigid bags designed for “quick-tourism”. The Sport-T range is particularly suitable for road and

sport-touring bikes, with medium to medium/small volumes and technical fabrics laminated and with a reinforced structure (water-resistant, with UV protection). Tanklock and Multilock systems patented by GIVI adds further practicality of use, making the fitting/release system fast and secure.Materials: made in EVA, thermoformed and covered with 900DD and PU. All materials are developed in accordance with Reach regulations.

Equipped with a rigid structure, these bags provide a stable load similar to traditional hard cases. The thermoforming provides full capacity for the load plus lightness, as well as an aerodynamic and sporty design.

M a t e r i a l s : made with ABS t h e r m o f o r m e d and covered in PU and Polyester 1000D. All materials are developed in accordance with Reach regulations.

ST602B Tanklock ST603B Tanklock

Tanklock tank bag, 4 ltr Tanklock tank bag, 15 ltr

ST604 Multilock ST605 TanklockED ST607 ST608

Pair of thermoformed Multilock side bags, 22 ltr

TanklockED tank bag, 5 ltr ndable thermoformed saddle bag, 22 ltr.

Thermoformed leg bag, 3 ltr.

3D600 Easylock

Pair of thermoformed Easylock side bags, 25 ltr

EA100B EA101B EA102B EA103B

Pair of large saddle bags, 40 ltr

Pair of small saddle bags, 30 ltr

Universal expandable tank bag, 25 ltr

Modular tank bag, 25+15 ltr

37EXPLORE. ENJOY.

38

SOFT BAGS


ULTIMA-T UT801Waterproof dry-roll bag, 30 ltr. Aimed at both road Enduro and Touring motorcycles.As standard:• Reflective print for greater visibility• Waterproof roll-top closure system• Rubber handle for transportation• Adjustable EVA-padded shoulder strap• Elastic straps for universal mounting


traction load 100 kg.S351 Pair of Trekker Strap belts, maximum


Info

510

260

260 30 ltAIR VALVE

UV TESTED

ULTIMA-T UT802Waterproof backpack, 35 ltr. Aimed at both road Enduro and Touring motorcycles.As standard:• Reflective print for greater visibility• Waterproof roll-top closure system• Additional internal zipped pocket• Adjustable shoulder straps and ergonomic padding• Air vent valve



traction load 75 kg.T518 4 Pieces Travel Set

Info

270

550

200 35 ltBELTS

WITH CLIPS

UV TESTED

ULTIMA-T UT803Waterproof Cargo bag, 40 ltr. Aimed at both road Enduro and Touring motorcycles.As standard:• Reflective print for greater visibility• Waterproof roll-top closure system• Additional internal zipped pocket• Adjustable EVA-padded shoulder strap• Air vent valve• Elastic straps for universal mounting




Info

500

300

270 40 ltAIR VALVE

UV TESTED

ULTIMA-T RANGE

39EXPLORE. ENJOY.

SOFT

BAG

S

ULTIMA-T UT804Waterproof Cargo bag, 80 ltr. Aimed at both road Enduro bikes and Touring motorcycles.As standard:• Reflective print for greater visibility• Waterproof roll-top closure system• Additional internal zipped pocket• Adjustable EVA-padded shoulder strap• Air vent valve• Elastic straps for universal mounting



Info

690

350

400 80 ltAIR VALVE

UV TESTED

ULTIMA-T UT805Cargo bag for both saddle and luggage rack incorporating a waterproof inner bag, capacity 35 ltr.Features:• Waterproof inner bag with IP X5 impermeability• Print incorporating a reflective motif for increased visibility• 2 outer pockets (not waterproof)• Internal pocket with zip closure• Adjustable EVA padded shoulder strap for easy transportation • 2 universal fastening straps

OPTIONALT518 4 Pieces Travel Set

Info

570

320

340 35 lt IPX5

UV TESTED

ULTIMA-T UT806Water resistant top bag, 65 ltr.As standard:• Inner lining with waterproof stitching to provide water-resistant protection• Reflective print for greater visibility• Additional external compartments• Double-layer production system for load protection• Additional internal zipped pocket• Adjustable EVA-padded shoulder strap• Straps for universal mounting


Info

680

420

340 65 ltBELTS

UV TESTED

40

SOFT BAGS


ULTIMA-T UT807BExpandable cargo bag, 20 ltr. Adjustable for mounting onto side bags, top-cases, extra supports, luggage racks and passenger saddles.As standard:• Inner lining with water resistant stitching to provide water-resistant protection• Reflective print for greater visibility• Rubber handle for transportation• Double-layer production system for load protection• Additional internal zipped pocket• Adjustable EVA-padded shoulder strap• Straps for universal mounting

Info

390

195

200 20 ltBELTS

ULTIMA-T UT808Water resistant side bags (25 ltr on each side).Compatible with GIVI side fixing systems PL, PLX, PLR and PL _ _ _ CAM (as support only).As standard:• Reflective print for greater visibility• Waterproof roll-top closure system• Load-fixing straps• Double-layer production system for load protection• Additional internal zipped pocket• Universal mounting straps, compatible with PL, PLX, PLR and PL _ _ _ CAM side-case holders

Info

230

250

350

HOOK AND LOOP BELTS

UV TESTEDIPX5

ULTIMA-T UT809 TANKLOCKEDTanklockED bag with waterproof inner bag and removable map holder, capacity 20 ltr. To be fitted in conjunction with the specific tanklock fitting BF_ _. Features:• Removable waterproof inner bag with IP X5 impermeability • 2 outer pockets with zipper closure• Holder for pocket-sized Sat-Nav / mobile phone included in the cover • Print incorporating a reflective motif for increased visibility • Removable waterproof map / tablet holder made from high-frequency welded Tarpaulin• Shoulder straps for easy transportation as a backpack• Padding that is removable from the rear pocket to cover the base attachment when the bag is carried as a backpack• Rain cover with transparent window

OPTIONALT508 s Internal protective bag for casual video/ photo-

graphic equipment during motorcycle transportationS110 12V Handlebar electrical outlet socket.S111 Hub kit for the electrical feed for tank bags.

Info

390

260

380 20 ltTABLET

UV TESTED

41EXPLORE. ENJOY.

SOFT

BAG

S

ULTIMA-T UT810 TANKLOCKED

Info

530

320

180>280 40 lt

HOOK AND LOOP

5 kg

EASY-T EA101BPair of small expandable saddle bags 30 ltr.System of rapid lock with belts, with hook and loop fastening and central safety belt.As standard:- Rain cover- Shoulder strap- 2 elastic bungees with hooks- Reinforcements in rigid plastic

Info

470

290

180>280 30 lt

HOOK AND LOOP

5 kg

TanklockED extendable tank bag for Enduro motorcycles, capacity 25 ltr. To be fitted in conjunction with the specific tanklock fitting BF_ _. Features: • Removable waterproof inner bag with IP X5 impermeability • 2 outer pockets with zipper closure• Front pocket for keys and accessories • Pocket for Sat-Nav / mobile phone included in the cover • Print incorporating a reflective motif for increased visibility• Removable waterproof map / tablet holder made from high-frequency welded Tarpaulin • Shoulder strap for easy transportation • Rain cover with transparent window

OPTIONALT508 s Internal protective bag for casual video/ photo-

graphic equipment during motorcycle transportationS110 12V Handlebar electrical outlet socket.S111 Hub kit for the electrical feed for tank bags.

EASY-T RANGE

Pair of large expandable saddle bags 40 ltr.System of rapid lock with belts, with hook and loop fastening and a central safety belt.As standard:- Rain cover- Shoulder strap- 2 elastic bungees with hooks- Reinforcements in rigid plastic

EASY-T EA100B

Info

390

290

380 25 ltUV TESTED

TABLET

42

SOFT BAGS


EASY-T EA102BUniversal expandable tank bag, with magnets and front pocket to hold the rain cover, 25 ltr.As standard:- Transparent map holder- Extractable shoulder straps for conversion to a rucksack- 4 belts for direct attachment to the motorcycle

OPTIONALT460B Universal base for tank bags, Tank

Fitting System

T508 sInternal protective bag for casual video/ photographic equipment during motorcycle transportation

S110 12V Handlebar electrical outlet socket.S111 Hub kit for the electrical feed for tank

bags.

Info

280

170>270

370 25 lt 3 kg

EASY-T EA103BModular tank bag with magnets, can be converted into a rucksack or shoulder-bag (universal) 25+15 ltr. The upper bag is detachable and can be fastened to the base. As standard:- Transparent map-holder- 4 belts for direct attachment to the motorcycle- Shoulder straps for conversion into a rucksack- Central safety belt to be fixed around the handlebars

OPTIONALT460B Universal base for tank bags, Tank Fitting

System


S110 12V Handlebar electrical outlet socket.S111 Hub kit for the electrical feed for tank bags

Info

290

310>400

37025+ 3 kg

EASY-T EA104BExpandable rucksack with helmet holder 22 ltAs standard:- Extractable rain-cover- Extractable helmet holder- Inner pockets for documents/mobile phone- Straps to attach it to the waist and chest

Info

420

430

140>240 22 lt

BELTSWITH CLIPS

43EXPLORE. ENJOY.

SOFT

BAG

S

EASY-T EA105BTunnel bag for scooter, 15 ltr.As standard:- Rain-cover- Front handle for transportation- Shoulder strap- 2 pockets containing quick fasteners- Reinforced parts in rigid plastic

Info

250

320

300 15 ltBELTS

WITH CLIPS

3 kg

EASY-T EA106BSmall-size universal tank-bag, with magnets 6 ltr.As standard:- Transparent top pocket for smartphone/tablet up to 7 inches - Rain-cover and shoulder strap- Non slip base with 2 pockets for removable magnets- 4 belts for direct attachment to the motorcycle

OPTIONALT460B Universal base for tank bags, Tank

Fitting System

S110 12V Handlebar electrical outlet socket.

S111 Hub kit for the electrical feed for tank bags

Info

310

130

160 6 lt 3 kgSMARTPHONE

HOLDER

EASY-T EA107BSeat roll-bag, 35 ltr. Double D-Ring fitting system with straps on the front and the side of the bag, with a central safety strap on the base, for fitment under the seat or tail.As standard:- Rain-cover - Shoulder strap- Multipurpose cross-shaped elastic straps- Side pocket- Upper pocket- Additional side-inlet


Info

470

300

300 35 ltBELTS

44

SOFT BAGS


EASY-T EA108BWaist-bag.As standard:- Internal pocket- Rear pocket- Front pocket

Info

250

110

140 1 kgBELTS

WITH CLIPS

EASY-T EA109BLeg wallet.Thanks to the detachable waist strap, it can be attached directly to a belt/belt loop.As standard:- Internal pocket- Front pocket

Info

110

170

75 1 kgBELTS

WITH CLIPS

EASY-T EA110BTank bag with specific base for Enduro bikes 25 ltr.As standard:- Side and front pockets- Rain cover- Shoulder strap-Transparent map-holder

OPTIONAL


S110 12V Handlebar electrical outlet socket.S111 Hub kit for the electrical feed for tank

bags

Info

250

200>310

300 25 lt 3 kg

45EXPLORE. ENJOY.

SOFT

BAG

S

EASY-T EA112BTablet holder with removable magnets, to be attached to the fuel tank.As standard:- Transparent pocket for tablet up to 10"- Zippered multipurpose pocket - Rain cover- Non slip base with 4 pockets for removable magnets- 4 fitting straps for non-metallic tanks

Info

285

30

360

EASY-T EA113BLeg wallet XL.As standard:- Adjustable strap at the waist- Adjustable strap at the thigh- Main compartment with internal mesh pocket- Front pocket with mobile phone pocket- Loop for trouser belt

Info

140

220

70 1 kgBELTS

WITH CLIPS

EASY-T EA114BYWaterproof seat bag or luggage carrier 30 ltr capacity with a black base and yellow, grey and silver reflective print.As standard:• Roll down closure system to ensure fully waterproof functionality• Carrying strap• Shoulder strap for transportation• 2 Elastic straps for universal mounting




Info

500

270

270 30 ltBELTS

46

SOFT BAGS


EASY-T EA114BRWaterproof saddlebag, 30 ltr capacity with a black base and red, grey and silver reflective print.As standard:• Roll down closure system to ensure fully waterproof functionality• Carrying strap• Shoulder strap for transportation• 2 Elastic straps for universal mounting




Info

500

270

270 30 ltBELTS

EASY-T EA114BKWaterproof cylinder seat bag - 30 ltr, black colour.As standard:• Roll down closure system to ensure fully waterprooffunctionality• Carrying strap• Shoulder strap for transportation• 2 Elastic straps for universal mounting




Info

500

270

270 30 ltBELTS

EASY-T EA114KGWaterproof cylinder seat bag - 30 ltr, khaki green colour.As standard:• Roll down closure system to ensure fully waterprooffunctionality• Carrying strap• Shoulder strap for transportation• 2 Elastic straps for universal mounting




Info

500

270

270 30 ltBELTS

47EXPLORE. ENJOY.

SOFT

BAG

S

EASY-T EA115BYWaterproof cylinder seat bag 40 ltr. with a black base and yellow, grey and silver reflective print.As standard:• Roll down closure system to ensure fully waterprooffunctionality• Carrying strap• Shoulder strap for transportation• 2 Elastic straps for universal mounting




Info

540

500

270 40 ltBELTS

EASY-T EA115BRWaterproof cylinder seat bag 40 ltr. with a black base and red, grey and silver reflective print.As standard:• Roll down closure system to ensure fully waterproof functionality• Carrying strap• Shoulder strap for transportation• 2 Elastic straps for universal mounting




Info

540

500

270 40 ltBELTS

EASY-T EA115BKWaterproof cylinder seat bag 40 ltr, black colour.As standard:• Roll down closure system to ensure fully waterprooffunctionality• Carrying strap• Shoulder strap for transportation• 2 Elastic straps for universal mounting




Info

540

500

270 40 ltBELTS

48

SOFT BAGS


EASY-T EA115KGWaterproof cylinder seat bag 40 ltr, khaki green colour.As standard:• Roll down closure system to ensure fully waterprooffunctionality• Carrying handles• Shoulder strap for transportation• 2 Elastic straps for universal mounting




Info

540

500

270 40 ltBELTS

EASY-T EA116

Info

200

200

360 10 lt

EASY-T EA117 TANKLOCK

Info

350

260

300 26 lt 2 kg

A bag created specifically for the Honda NC750X (16-19) to be mounted to the cover of the integrated storage compartment. Mounting System: using the dedicated harness, the bag attaches to the lid of the integrated storage compartment. The bag is attached to the harness using 4 quick-release straps. Features:• Cover with an integrated Sat-Nav / mobile phone holder • 2 side pockets with zipper closure• Reflective print and inserts for increased visibility• Rain cover with transparent window• Shoulder strap for easy transportation

OPTIONALS110 12V Handlebar electrical outlet socket.S111 Hub kit for the electrical feed for tank bags

Extendable TANKLOCK tank bag, 26 ltr. To be fitted in conjunction with the specific tanklock fitting BF_ _. Features:• Front pocket to accommodate the rain cover• Transparent map holder and front handle• Extendable up to 26 ltr• 2 side pockets with zipper closure• Shoulder strap for easy transportation• Rain cover

OPTIONALT508 s

Internal protective bag for casual video/ photographic equipment during motorcycle transportation


49EXPLORE. ENJOY.

SOFT

BAG

S

EASY-T EA118 TANKLOCKExtendable TANKLOCK Bag for Enduro motorcycles, 25 ltr. To be fitted in conjunction with the specific tanklock fitting BF_ _. Features:• Front pocket and transparent map holder• 2 side pockets with zipper closure• Shoulder strap for easy transportation• Front handle• Rain cover

OPTIONALT508 s

Internal protective bag for casual video/ photographic equipment during motorcycle transportation


Info

320

250

360 25 lt 2 kg

EASY-T EA119BKSeat bag, 60 ltrFeatures:• Roll top closure system to ensure impermeability• Handle for easy transportation• Reflective prints for increased visibility• Padded shoulder strap for easy transportation• 2 elasticated straps


Info

600

540

300 60 ltBELTS

EASY-T EA120Waterproof cargo bag 15 ltr.As standard:• Roll down closure system to ensure fully waterproof• Shoulder strap• Reinforced interiors to provide greater support to the structure of the bag• Handle for easy transportation• Reflective print for improved visibility• Rear mesh pocket• 4 straps for universal mounting

Info

380

260

160 15 ltBELTS

WITH CLIPS

50

SOFT BAGS


EASY-T EA121Waterproof backpack, 18 ltr.As standard:• Roll down closure system to ensure fully waterproof• Padded panel at the rear• Handle for easy transportation• Reflective print for improved visibility• Padded shoulder straps• Side mesh pocket• Elasticated and adjustable front pocket• Belt straps/buckles with hooks at the waist and chest for greater comfort

Info

250

470

160 18 ltBELTS

WITH CLIPS

EASY-T EA122Tunnel/Seat bag, 23 ltr. Universal fitment via two straps provided that fit to buckles positioned inside the side pockets of the bag.As standard:• Smartphone holder in top section• Reflective inserts for improved visibility• Waterproof fluorescent removable rain cover built into the rear pocket• Side pockets• Shoulder strap• Handle for easy transportation

Info

310

290

250 23 ltBELTS

WITH CLIPS

EASY-T EA123 TANKLOCK“Mini” TANKLOCK bag, 5 ltr. To be fitted in conjunction with the specific TANKLOCK fitting BF_ _.As standard:• Reflective inserts for improved visibility• Rain cover• Shoulder strap• Handle for easy transportation

OPTIONALS110 12V Handlebar electrical outlet

socket.

S111 Hub kit for the electrical feed for tank bags.

Info

260

100

200 5 lt 2 kg

51EXPLORE. ENJOY.

SOFT

BAG

S

EASY-T EA124Rucksack, 15 ltr.As standard: • Adjustable chest straps• Adjustable waist straps removable from the back holder • Handle for transport by hand• Anti-slip base• Expandible• Reflective print for improved visibility• Main compartment equipped with zipper and allotment for laptop/tablet• Top-zipped sunglasses holder • Rain cover that becomes a helmet holder • Two side bottle holders with liquid draining system • Padded shoulder straps and backrest for greater comfort

Info

250

350

200 15 ltBELTS

WITH CLIPS

GRAVEL-T GRT701 sWaterproof compact backpack, 25 ltr capacity, with ergonomic shoulder straps and ventilated pads.As standard:- Roll top closure system to guarantee complete water resistance of the main compartment- Hook and loop fastening- Mesh side pocket- Reflective inserts- Mesh covered yellow coloured EVA PAD on the rear and shoulder straps

Info

230

440

220 25 ltBELTS

WITH CLIPS

GRAVEL-T GRT702 sModular, cylindrical, waterproof cargo bag, 20 ltr capacity. Can be mounted in combination with GRT703 bag. As standard:- Pair of elastic straps with plastic hook for attaching to the bike- Specific straps for modular assembly with the model GRT703 bag- Front handle with rubber insert- Adjustable EVA padded shoulder strap for transportation- Reflective inserts




Info

450

200

200 20 ltAIR VALVE

GRAVEL-T RANGE

52

SOFT BAGS


GRAVEL-T GRT703Modular, cylindrical, waterproof cargo bag, 40 ltr capacity. Can be mounted in combination with GRT702 bag.As standard:- Pair of elastic straps with plastic hook for attaching to the bike- Double sided handle with padded insert- Adjustable padded shoulder strap for transportation- Reflective inserts



Info

500

300

270 40 ltAIR VALVE

GRAVEL-T GRT704 sWaterproof waist bag, 3 ltr capacity. Main compartment with pocket for tablet (up to 7”).As standard:- Adjustable strap for attaching to the waist with a padded band- Pocket under additional flap for small accessories- Neoprene inner pocket for smart phone and minitablet- Zipper closure with water resistant flap and quick release buckles- Reflective inserts

Info

260

210

90 3 ltBELTS

WITH CLIPS

GRAVEL-T GRT709 CANYONPair of side bags, 35 + 35 ltr Designed for Enduro and off-road motorcycles. Quick release UNIFIT from the mounts, with GIVI Security Locks (can be keyed the same as the top-case, trolley base or the toolbox using the SL102, SL103 or SL105 kits). A nylon plate is included for fastening to side fitting system such us PL, PLR, PL _ CAM, PLR _ CAM and other types of tubolar side holders. Features:• Waterproof roll-down closures• High visibility yellow Tarpaulin waterproof IP X5 rated removable inner bag, with carrying strap• Thermo or regular bottle carrying pocket• Shoulder straps


Info

200

480

470

WITH PLATE

UV TESTED BELTSWITH CLIPS

53EXPLORE. ENJOY.

SOFT

BAG

S

GRAVEL-T GRT710

InfoWAIST BAG BELTS

WITH CLIPSUV TESTED

GRAVEL-T GRT711Black rucksack, 25 ltr., with yellow interior.As standard:• Removable waterproof inner bag with thermo-sealed seams • Padded shoulder straps• Adjustable chest and waist straps for increased comfort• Base compartment to store tools• Internal, removable fluorescent yellow bag (can be hooked externally) to carry shoes or boots after use• Provision for accommodating a water bag (not included)• Rear pocket• Moisture drainage system via side vents• Front and side slots for M.O.L.L.E system • 2 adjustable belt straps with hooks• Set of 4 accessories for the M.O.L.L.E system (2 D-rings plus 2 universal hooks)

Info

300

480

170 25 ltUV TESTED

BELTSWITH CLIPS

BOOTS BAGIPX5

GRAVEL-T GRT714Cylindrical, waterproof cargo bag, 20 ltr., colour black with yellow inner.As standard:• Air release valve• Reflective print for improved visibility• Pair of elastic straps with plastic hook for attaching to the bike• Adjustable padded shoulder strap for transportation• Front handle with rubber insert

Info

450

200

200 20 ltAIR VALVE

UV TESTED

Portable pouch with a compartment for tools, a bottle holder and a waterproof mobile phone holder. Features: • Hinged zipped pocket • Secondary pocket with roll-up tool holder suitable for integrated tools• Side pocket for keys and accessories • Inner pocket • Bottle holder pocket • External elasticated straps attached to the main compartment for the transportation of a light waterproof jacket • IP X5 waterproof, removable mobile phone holder • Print incorporating a reflective motif for increased visibility

54

SOFT BAGS


Info

450

200

200 20 ltUV TESTED

GRAVEL-T GRT716Waterproof tank bag, 10 ltr colour black with yellow inner.As standard:• Reflective print for improved visibility• Transparent upper pocket for map/smart phone/ tablet• Water resistant zip closure with waterproof cover for added protection• Internal reinforcements to provide greater support to the structure of the bag• Anti-slip base• Universal belt / strap attachment system which can be fitted to any make / model of motorcycle

Info

270

170

230 10 ltBELTS

UV TESTED

GRAVEL-T GRT717Universal tool bag 5 ltr., colour black with yellow inner. Aimed at offroad Enduro motorcycles.As standard:• Roll down closure system to ensure fully waterproof• Reflective print for improved visibility• Rigid internal base equipped with a flip-off closure for the tool box hatchMounting options: the bag can be attached to a motorcycle saddle, the front mud-guard or combined with / or as an extra compartment of the side rucksacks GRT718

Info

280

130

140 5 ltBELTS

UV TESTED

Waterproof tank bag, 20 ltr, colour black with yellow inner. Equipped with specific base for quick attachment/detachment.As standard:• Reflective print for improved visibility• Transparent upper pocket for map/smart phone/ tablet• Side pockets (not waterproof)• Water resistant zip closure with waterproof cover for added protection• Handle with rubber insert• Adjustable padded shoulder strap for transportation• Internal reinforcements to provide greater support to the structure of the bag• Anti-slip base

OPTIONAL


GRAVEL-T GRT715

55EXPLORE. ENJOY.

SOFT

BAG

S

GRAVEL-T GRT718Pair of side bags waterproof (15 ltr on each side), colour black with yellow inner. Aimed at off-road Enduro motorcycles.As standard:• Roll down closure system to ensure fully waterproof• Belts for attachment to the motorcycle frame• Hook and loop fastening and a central safety belt.• Reflective insert and print for improved visibility• Rapid attachment straps at the top and base of the bag to mount the GRT717 bag or other compatible load

OPTIONALS290S Universal anodised aluminium heat

guard, size S (length 150mm)S290M Universal anodised aluminium heat

guard, size M (length 200mm)

Info

380

320

180

HOOK AND LOOP BELTS

UV TESTED

METRO-T MT501 MULTILOCKPair of thermoformed Multilock side bags with vertical load. Expandable, 18 ltr capacity.To be combined with the specific soft side bag holders (TMT _ _ _ )As standard:- Side reflective inserts- Side mesh pockets- Rain cover- Handle for transportation- Shoulder strap- Zipper pulls designed to be used with a safety lock


Info

340

360

200 18 ltMULTILOCK

4 kg

UV TESTED

METRO-T MT501S MULTILOCKSingle thermoformed Multilock side bag with vertical load. Expandable, 18 ltr capacity.To be combined with the specific soft side bag holders (TMT _ _ _ ).As standard:- Side reflective inserts- Side mesh pockets- Rain cover- Handle for transportation- Shoulder strap- Zipper pulls designed to be used with a safety lock


Info

340

360

200 18 ltMULTILOCK

4 kg

UV TESTED

METRO-T RANGE

56

SOFT BAGS


METRO-T MT502Saddle bag with extractable shoulder straps that can be converted into a multi-function backpack. Expandable, with a 30 ltr capacity.Can be mounted in combination with MT502bag.As standard:- Side reflective inserts- Rain cover- Extractable shoulder straps for transformation into a backpack- Zipper pulls designed to be used with a safety lock

Info

440

230

300 30 lt

METRO-T MT503Roll bag for front fork/tail, 4 ltr capacity. Can be mounted in combination with MT502 bag.As standard:- Roll-top closure- Main compartment with sealed seams to guarantee complete water resistance- Separate and coated compartment to carry small tools / accessories for emergencies / utility- Reflective inserts- Zipper pulls designed to be used with a safety lock

Info

420

120

170 4 ltBELTS

WITH CLIPS

METRO-T MT505 TANKLOCKTANKLOCK tank bag, thermoformed, expandable, with a 5 ltr capacity. To be fitted in conjunction with the specific tanklock fitting BF_ _. As standard:- Inner pocket to store a smart phone- Inner pocket in the top-shell- Shoulder strap for transportation- Zipper pulls designed to be used with a safety lock- Rear pocket prepared for a cable port, to be combined with POWER HUB accessories for electronic devices.

OPTIONALS110 12V Handlebar electrical outlet socket.S111 Hub kit for the electrical feed for tank

bags

Info

220

190

280 5 ltREADY TO

POWER HUB

57EXPLORE. ENJOY.

SOFT

BAG

S

SPORT-T ST602B TANKLOCKTANKLOCK tank bag, with a 4 ltr capacity.To be fitted in conjunction with the specific tanklock fitting BF_ _As standard:- Side reflective inserts- Handle for transportation- Inner case for sunglasses- Adjustable shoulder strap for transportation- Transparent window to store and use a smart phone- High-visibility rain cover to increase active safety- Zipper pulls designed to be used with a safety lock

OPTIONALS110 12V Handlebar electrical outlet socket.S111 Hub kit for the electrical feed for tank bags

Info

240

170

290 4 lt 2 kgREADY TO

POWER HUB

SPORT-T ST603B TANKLOCKTANKLOCK tank bag, expandable, with a 15 ltr capacity. To be fitted in conjunction with the specific tanklock fitting BF_ _. Not compatible with flange BF24.As standard:- Side reflective inserts- Handle for transportation- Adjustable shoulder strap for transportation- Transparent window to store and use a smartphone- High-visibility rain cover to increase active safety- Zipper pulls designed to be used with a safety lock


bags.

Info

280

260>310

335 15 lt 2 kgREADY TO

POWER HUB

SPORT-T RANGE

SPORT-T ST604 MULTILOCKPair of thermoformed Multilock side bags.Expandable, 22 ltr capacity. To be combined with the specific side soft bags holders TST _ _ _.As standard:- Extension with retractable support straps- Reflective inserts and handle for transportation- Mesh inner pocket- Separate inner compartment- Inner elastic straps to contain cargo- High-visibility rain cover to increase active safety- Zipper pulls designed to be used with a safety lock- Straps to hold the opening cover

Info

450

340

300 22 ltMULTILOCK

4 kg

58

SOFT BAGS


SPORT-T ST605 TANKLOCKEDTanklockED bag, capacity 5 ltr. To be fitted in conjunction with the specific tanklock fitting BF_ _Features: • Side reflective inserts• Rain cover • Handle for easy transportation • Internal glasses holder • Shoulder strap for easy transportation • Zipper pulls compatible with a safety lock • IP X5 waterproof, removable mobile phone holder • Cable outlet for the GIVI Power Hub

Info

240

176

270 5 ltREADY TO

POWER HUB

SPORT-T ST607Expandable thermoformed saddle bag suitable for sporty motorcycles, 22 ltr.As standard:• Reflective print for improved visibility• Exspandible to 26 ltr• Waterproof fluorescent removable rain cover built into the rear pocket• Mesh pocket inside the lid• Side pockets• Handle with rubber insert• Shoulder strap• Universal fitting with 4 straps

Info

300

260

290 22 ltUV TESTED

BELTS

SPORT-T ST608Thermoformed leg bag, 3 ltr.As standard:• Adjustable waist straps• Possibility to hook the bag directly to a belt or trouser loop• Elasticated and adjustable leg straps• Internal flaps to guarantee the stability of the contents• Reflective print for improved visibility• Rain cover• Three inner pockets (one meshed, one with zip closure and one with a smartphone holder).

Info

150

240

80 3 ltUV TESTED

59EXPLORE. ENJOY.

SOFT

BAG

S

3D 3D600 EASYLOCKPair of expandable Easylock side bags, using the rapid fitting system to lock /unlock, to be combined with the specific carrier TE_ _ _ .As standard:- Waterproof zips equipped for a padlock closure- Reflective inserts for increased visibility- Thermo-sealed rain cover- Internal elastic to secure the load- Internal cover with a net compartment- Handle for manual carrying

Info

450

300

260>300 25 lt

4 kg

XSTREAM XS307 TANKLOCK

3D RANGE

XSTREAM RANGE

TANKLOCK expandable tank bag. To be fitted in conjunction with the specific Tanklock fitting BF_ _As standard:- Water-resistant zips and reflective inserts- Rain cover in fluorescent material- Weatherproof internal compartment to store theraincover- Additional protection against dampness- Removable tablet-holder and cable port- Handle and shoulder-strap for easy transportation

OPTIONAL




Info

270

180>210

350 15 lt

60

SOFT BAGS


XSTREAM XS312 s

Info

270

180>210

350 15 lt

XSTREAM XS315Tool case pockets specifically designed for BMW R1200GS (13 > 18) / R 1250 GS (19).As standard:- Central bag fitted with hook and loop fasteningstraps- 2 side pouch tool cases- Reflective inserts

Info

180

200

45

90

230

60

HOOK AND LOOP

1 kg

XSTREAM XS317 sMulti-task cargo rucksack with notebook pocket - 30 ltr.As standard:- Optimized load: The large frontal compartment is equipped with mesh pockets for carrying clothes or other objects; the rear compartment is intended for the transportation of a notebook with screen size up to 15.6 inches- Ergonomics: Ample compression straps on the sternum and the waist evenly distribute weight so as not to tire the shoulders- Safety: Wide reflective inserts with a fluorescent and removable rain cover

Info

310

250

470 30 lt

Expandable tank bag with removable magnets - 15 ltr. As standard:- Reflective inserts and fluorescent rain cover- Internal anti-damp protection- Removable tablet holder- Handle and shoulder strap for easy transportation- 4 straps for fitting on non-metallic tanks- Primary opening zip with security point that allowsthe use of a padlock (not included)

OPTIONAL



61EXPLORE. ENJOY.

SOFT

BAG

S

XSTREAM XS320 TANKLOCKTANKLOCK bag 15 lts. To be fitted in conjunction with the specific tanklock fitting (BF25 / BF26), specific to the Honda CRF1000L Africa Twin (16 > 18) / CRF1000L Africa Twin Adventure Sports (18) / Kawasaki Versys 650 (15 > 17). As standard:- Side reflective prints and rain cover- Handle for easy transportation- Map holder / additional tablet holder- Adjustable shoulder carrying strap- Zipper pulls designed to be used with a safety lock- Transparent upper window


bags

Info

340

180>230

290 15 ltREADY TO

POWER HUB

XSTREAM XS5112EPair of panniers to be mounted to the original engine guard of the BMW R1200GS Adventure (14 > 18).As standard:- Reflective inserts- Primary opening zip with a security point that allows the use of a padlock (not included)- Fluorescent rain cover- Belts and hook and loop fastening straps to enable fitting to the engine guard

Info

1 kg

XSTREAM XS5112RSpecific tool bag, designed to be mounted under the original rear rack of the BMW R1200GS Adventure (14 > 18).As standard:- Reflective inserts- Primary opening zip with a security point that allows the use of a padlock (not included)- Belts and hook and loop fastening straps to enable fitting under the rear rack

Not compatible with the SRA5112 produced from 2017 due to the reinforcement installed for the rear rack

Info

1 kg

62

SOFT BAGS


EXTRA CARGO BAGS T515

Roll-top bag with tool compartment and hook (compatible with M.O.L.L.E.). Suitable to be placed inside the S250 TOOLBOX.Features: • Main internal net pocket with zipper closure• Variety of elasticated straps • Mounts to hold a variety of tools • Reflective print for increased visibility • Compatible with side bags GRT709 which can be hooked directly to the chassis frame (compatible with M.O.L.L.E.)• Hook to hang the bag when open

Info

230

130

60

UV TESTED

EXTRA CARGO BAGS


Universal handlebar pouch with internal mobile phone compartment.Features:• Internal mesh pocket with zipper closure• Elasticated mounts for pens / tools • Magnetic closure• Reflective print for increased visibility• Detachable, adjustable waist belt for attachment around the waistFastening system:• 2 side straps with double D ring and strap with hook and loop fastening on the base

Info

240

130

90 3 ltUV TESTED BELTS

63EXPLORE. ENJOY.

SOFT

BAG

S


Water resistant leg bagFeatures:• Reflective print for increased visibility• Front pocket • Adjustable waist straps • Elasticated and adjustable leg straps

Info

110

190

75

UV TESTED


Pair of universal waterproof engine-guard bags, 5 ltr.As standard:- Reflective prints- Roll-top closure- Shoulder straps- Straps with D-rings to hook to all engine guards.Can also be mounted on the lids of the Trekker Outback and Trekker Dolomiti aluminium cases, attaching them to the belt-strap loops.

Info

200

270

100 5 ltUV TESTED

64

SOFT BAGS


SOFT BAGSCOMPLEMENTS

SOFT BAGS COMPLEMENTS T508 s

Internal protective bag for casual video/ photographic equipment during motorcycle transportation.Exclusive protection of the contents when placed in one of our motorcycle soft bag applications (tank bag or seat bag starting from 14 ltr capacity).This bag can be used as an external transportation bag, but in this case protection for video/ photographic equipment against shocks and rain is not guaranteed.As standard:- Inner separators in velveteen, scratch-resistant, padded and removable- Mesh pocket inside the cover with zip closure- Shoulder strap- Handle

Info

230

150

270 6 lt


4 Pieces GIVI Travel Set consisting of;Pack cube M - L: 2 soft bags supplied in two different sizes (one medium and one large), with a mesh section in the lid and carrying handles for easy transportation.Laundry bag: a soft bag with draw-string closure and mesh sides to provide ventilation for clothing / laundryToiletry bag: a container for toiletries complete with a hook for hanging in the bathroom / shower-room and including a removable pocket for bottles.Features: 1) Pack cube M - L:• Supplied in two different sizes: Medium (19 x 32 x 10 cm) and Large (26 x 42 x 14 cm)• Handle for easy transportation• Breathable net fabric• 2-way zip• GIVI branding 2) Laundry bag• Drawstring closure • Breathable net fabric• GIVI branding3) Toiletries bag• External hook for hanging • Internal net pocket• Internal PVC compartment with zipper closure and small pocket• Removable net fabric accessory with a hanging hook and compartments for bottles • GIVI branding

65EXPLORE. ENJOY.

SOFT

BAG

S

S111 POWER HUBHub kit for the electrical feed for tank bags. It supplies three devices through the USB ports and a fourth device with the ISO 12v Internal Power connector.Fully waterproof external wiring kit. It allows the charging of three devices with USB ports for a total of 9000 mA (3x3000 mA). It is possible to use original USB cables from devices without purchasing further adapters. To be specifically combined with the S110 kit

OPTIONALS110 12V Handlebar electrical outlet

socket.

EXTRA CARGO BAGS T4KIT

Magnet kit (comprising 4 magnets to allow the mounting of a tank bag onto a metal tank).All universal tank bags are prepared to contain 2/4 magnets.

EXTRA CARGO BAGS T460B

The TFS System has been created to simplify the fixing of tank bags onto plastic tanks that, unlike metal ones, cannot be used with a magnetic fitting system.It is based on a laminated EVA polyester foil covered with anti-slip PVC which, once it is attached to the bike by using the 4 adjustable belts, is the base to quickly fasten and unfasten the bag to the bike.The TSF measurements means it is usable for most motorcycle models and the system allows the fastening of all tank bags in our range, with the exclusion of TANKLOCK bags

6666

SOFT BAGS


APRILIABF02 Shiver 750 / Shiver GT 750 (07 > 12) / ABS (09 > 12)

BF02 Shiver 750 / ABS (10 > 16)

BF02 ETV 1000 Caponord (01 > 10)

BENELLIBF02 BN302 (15 > 18)

BF34 Leoncino 500 (17 > 18)

BF02 BN600 (13 > 17)

BF02 Tre 899 K / Tre 1130 K (06 > 16)

BMWBF31 G 310 R (17 > 18)

BF31 G 310 GS (17 > 18)

BF15 F 650 GS / F 800 GS (08 > 17)

BF19 G 650 GS (11 > 17)

BF15 F 700 GS (13 > 17)

BF11 F 750 GS (18)

BF15 F 800 GS Adventure (13 > 18)

BF16 F 800 GT (13 > 18)

BF16 F 800 R (09 > 14)

BF16 F 800 R (15 > 18)

BF11 F 850 GS (18)

BF22 S 1000 RR (12 > 18)

BF22 S 1000 R (14 > 18)

BF11 S 1000 XR (15 > 18)

BF11 R 1150 R (01 > 06)

BF11 R 1150 RT (01)

BF11 R 1150 RT (02 > 04)

BF11 K 1200 RS (00 > 04)

BF11 K 1200 R (05 > 08) / K 1300 R (09 > 16)

BF11 K 1200 S (05 > 08) / K 1300 S (09 > 16)

BF11 K 1200 GT / K 1300 GT (06 > 10)

BF22 R 1200 GS Adventure (06 > 13)

BF17 R 1200 GS Adventure (14 > 18)

BF17 R 1200 GS (04 > 12)

BF11 R 1200 GS (13 > 18)

BF22 R 1200 R (11 > 14)

BF11 R 1200 R (15 > 18)

BF11 R 1200 RS (15 > 18)

BF17 R 1200 RT (14 > 18)

BF22 R 1200 S (06)

BF22 R NINE T (14 > 18)

BF22 R Nine T Scrambler (16 > 18)

DUCATIBF09 Monster 696 / 796 / 1100 (08 > 14)

BF08 Monster S2R / S4R / S4RS 800 / 1000 (04 > 08)

BF08 848 / 1098 / 1198 (07 > 12)

BF11 Multistrada 950 (17 > 18)

BF09 Monster 1100 Evo (11 > 12)




BF11 Multistrada Enduro 1200 (16 > 18)

BF08 Monster 1200 (14 > 18)

BF11 Multistrada 1260 (18)

HONDABF20 CB 500 F (16 > 18)

BF20 CB 500 X (13 > 18)

BF03 CBF 600S/ CBF 600N (04 > 12)

BF03 CBR 600 F (11 > 13)

BF03 CBR 600 RR (05 > 06)

BF03 CBR 600 RR (07 > 09)

BF03 Hornet 600 / Hornet 600 ABS (07 > 10)

BF03 Hornet 600 / Hornet 600 ABS (11 > 13)

BF20 CB650 F / CBR650F (14 > 16)

BF30 CB 650F (17 > 18)

BF03 NT 700 Deauville (06 > 12)

BF03 XL 700V Transalp (08 > 13)

BF20 VFR 800 F (14 > 18)

BF03 VFR 800 VTEC (02 > 11)

BF03 CB 1000 R (08 > 17)

BF38 CB 1000 R (18)

BF03 CBF 1000 / ABS (06 > 09)

BF03 CBF 1000 / CBF 1000 ST (10 > 14)

BF03 CBR 1000 RR (08 > 09)

BF03 CBR 1000 RR (12 > 13)

BF30 CBR 1000 RR (17 > 18)

BF25 CRF1000L Africa Twin (16 > 17)

BF25 CRF1000L Africa Twin (18)

BF25 CRF1000L Africa Twin Adventure Sports (18)

BF03 Crosstourer 1200 / Crosstourer 1200 DCT (12 > 18)

BF03 VFR 1200 F (10 > 16)

BF03 CB 1300 S (10 > 15)

BF41 CB125R (18 > 19) / CB300R (18 > 19)

KAWASAKIBF14 Ninja 300 (13 > 18)

BF29 Versys-X 300 (17 > 18)

BF04 ER 6n / ER 6f 650 (05 > 08)

BF04 ER-6n / ER-6f 650 (09 > 11)

BF04 ER-6n / ER-6f 650 (12 > 16)

SPARE PARTS: ZT480F - Nylon flange for fixing the bags ZT480R - Replacement flange for bagsCOMPATIBILITY FLANGE FOR TANKLOCK BAGS

67EXPLORE. ENJOY. 67EXPLORE. ENJOY.

SOFT

BAG

S

BF04 Versys 650 (10 > 14)

BF26 Versys 650 (15 > 18)

BF28 Z 650 (17 > 18)

BF04 Z 750 (07 > 14)

BF04 Z 800 (13 > 17)

BF29 Z 900 (17 > 18)

BF04 Z 900 RS (18)

BF04 Versys 1000 (12 > 14)

BF04 Versys 1000 (15 > 16)

BF04 Versys 1000 (17 > 18)

BF04 Z 1000 (10 > 13)

BF32 Z 1000 (14 > 18)

BF04 Z 1000 SX (11 > 16)

BF04 Z 1000 SX (17 > 18)

BF35 Ninja H2 SX (18)

BF42 Z125 (19)

KTMBF12 Duke 125-200-390 (11 > 16)

BF33 Duke 125-390 (17 > 18)

BF37 Duke 790 (18)

BF11 1050 Adventure (15 > 16) / 1090 Adventure (17 > 18)

BF11 1190 Adventure / Adventure R (13 > 16)

BF11 1290 Superduke (13 > 18)

BF11 1290 Super Adventure (15 > 16) / 1290 Super Adventure T (17)

BF11 1290 Super Adventure R (17 > 18)

BF11 1290 Super Adventure S (17 > 18)

MV AGUSTABF05 Brutale 750 - 910 (> 09)

BF02 Brutale 675-800 (13 > 15)

BF02 Turismo Veloce 800 (15)

BF02 F3 675-800

BF05 F4 750-1000

ROYAL ENFIELDBF39 Himalayan (18)

SUZUKIBF01 V-Strom 250 (17 > 18)

BF01 GSR 600 (06 > 11)

BF01 GSX R 600 / 750 (06 > 10)

BF10 DL 650 V-Strom (04 > 11)

BF01 DL 650 V-Strom L2-L3-L4-L5-L6 (11 > 16)

BF01 DL 650 V-Strom (17 > 18)

BF01 Gladius 650 (09 > 16)

BF01 GSF 650 Bandit / GSF 650 Bandit S K9-L0-L1-L2-L3-L4 (09 > 15)

BF01 GSX 650F (08 > 14) / GSX 1250F (10 > 16)

BF01 SV 650 / SV 650 S (03 > 08)

BF01 SV 650 (16 > 18)

BF01 GSX S750 (17 > 18)

BF01 GSR 750 (11 > 16)

BF10 DL 1000 V-Strom (02 > 11)

BF18 DL 1000 V-Strom (14 > 16)

BF18 DL 1000 V-Strom (17 > 18)

BF01 SV 1000 / SV 1000 S (03 > 08)

BF18 GSX S1000F / GSX S1000 (15 > 18)

BF01 GSX 1300R Hayabusa (08 > 16)

TRIUMPHBF02 Street Triple 675 (07 > 12)

BF02 Street Triple 675 (13 > 16)

BF02 Street Triple 765 (17 > 18)

BF02 Tiger 800 / 800 XC / 800 XR (11 > 17)

BF02 Tiger 800 XC / 800 XR (18)

BF02 Tiger 1050 (07 > 12)

BF02 ST 1050 Sprint (05 > 11)

BF02 Speed Triple 1050 (08 > 10)



BF02 Sprint GT 1050 (10 > 16)

BF02 Tiger Sport 1050 (13 > 18)

BF02 Tiger Explorer 1200 (12 > 15)

BF02 Tiger Explorer 1200 (16 > 17)

BF02 Tiger 1200 (18)

YAMAHABF05 MT-03 321 (16 > 18)

BF05 FZ6/FZ6 600 Fazer (04 > 06)

BF05 FZ6 S2 / FZ6 600 Fazer S2 (07 > 11)

BF05 XJ6 (09 > 12) / XJ6 Diversion / XJ6 Diversion F 600 (09 > 13)

BF05 XJ6 600 (13 > 15)

BF05 MT-03 660 (06 > 14)

BF05 YZF 600 R6 (06 > 07)

BF21 MT-07 (14 > 17)

BF36 MT-07 (18)

BF05 MT-07 Tracer (16 > 18)

BF24 XSR700 (16 > 18)

BF05 FZ8 / Fazer 8 800 (10 > 15)

BF05 MT-09 (13 > 16)

BF05 MT-09 (17 > 18)

BF23 MT-09 Tracer (15 > 17)

BF05 TDM 900 (02 > 14)

BF05 XSR900 (16 > 18)

BF23 Tracer 900 / Tracer 900 GT (18)

BF05 FZ1 Fazer 1000 (06 > 15)

BF05 YZF R1 1000 (09 > 12)

BF27 MT-10 (16 > 18)

BF05 XT 1200Z Super Teneré (10 > 18)

BF05 XT1200ZE Super Tenerè (14 > 18)

BF05 FJR 1300 (06 > 12)

BF05 FJR 1300 (13 > 18)

BF05 XJR 1300 (07 > 14)

6868

SOFT BAGS


FITTING SOLUTIONS FOR SOFT BAGS

SADDLE BAGS

EASYLOCK SADDLE BAGS - Easylock System

T_ _ _

TE_ _ _

TUBULAR HOLDER

In order to attach universal soft side bags in a safe and secure way, GIVI has created and produced stabilising holders for various motorcycle models. The mounting of these side holders enables bags to be attached in such a way so as to avoid damage due to the proximity of the exhaust pipe when the bags are mounted.

For prices of motorcycle specific items, (T_ _ _ _ ) please refer to the section “SPECIFIC EQUIPMENT FOR BIKES AND SCOOTERS”.

In the event that there is no specific tubular holder for your model of motorcycle on which you can mount the soft side bags of your choice, we suggest mounting the bags directly onto the motorcycle, obviously ensuring that the bags are securely attached and that they do not come into contact with the exhaust pipe, rear wheel and do not cause any interference with any other moving part of the motorcycle.

TUBULAR HOLDER(IT CAN ALSO BE USED AS HOLDER FOR SOFT LUGGAGE)

Insert the key into the lock and turn it, locate the bag onto the TE specific frame so that the two tabs positioned on the lower section of the attachment system hold onto the base of the bag; then push the bag onto the frame to attach it. To remove the key, rotate it in a vertical position.

For prices of motorcycle specific items, (TE _ _ _) please refer to the section “SPECIFIC EQUIPMENT FOR BIKES AND SCOOTERS”.

SADDLE BAGS

MILTILOCK SYSTEM* - Metro-T Range

MILTILOCK SYSTEM* - Sport-T Range

TMT_ _ _

TST_ _ _

MT501 / MT501S - Metro-T Range

ST604 - Sport-T Range

TMT_ _ _

TUBULAR HOLDER FOR MULTILOCK BAGSMETRO-T RANGE

For prices of motorcycle specific items, (TMT_ _ _ _ ) please refer to the section “SPECIFIC EQUIPMENT FOR BIKES AND SCOOTERS”.

TST_ _ _

TUBULAR HOLDER FOR MULTILOCK BAGSSPORT-T RANGE

For prices of motorcycle specific items, (TST _ _ _ _) please refer to the section “SPECIFIC EQUIPMENT FOR BIKES AND SCOOTERS”.

69EXPLORE. ENJOY. 69EXPLORE. ENJOY.

SOFT

BAG

S

TANK BAGS

MAGNETS KIT - T4KITMAGNETS KIT(Comprising 4 magnets to allow the mounting of a tank bag onto a metallic tank). All tank bags are prepared to contain either 2 or 4 magnets.Simply insert either 4 magnets into the appropriate slots on the bag and mount the bag onto the motorcycle fuel tank.

T4KIT

BELTS INCLUDED - ALL TANK BAGS ARE SUPPLIED WITH 4 BELTS- Bind the included belts onto the frame of the motorcycle- Attach the other end of the belts to the D-rings on the base of the bag

The TFS system has been created by GIVI to simplify the fixing of tank bags onto plastic tanks that, unlike metal ones, cannot accommodate a magnetic fitting system. It is based on a laminated EVA polyester foil, covered with anti-slip PVC which, once it is attached to the motorcycle using the four adjustable belts, is the base to which the bag can be quickly fastened and unfastened. The TFS measurements (see table below) means it can be used on most makes of motorcycle and the system allows the fastening of all tank bags in our range, with the exclusion of our Tanklock bags.

- Attach the TFS (Tank Fitting System) on the frame of the motorcycle, using the 4 adjustable belts included- Attach the bag onto the TFS base using the belts included

T460B

TFS (TANK FITTING SYSTEM) - Universal base for tank bags

TANK BAG FOR ENDURO BIKES WITH SPECIFIC BASE INCLUDED: EA110B and EA116<EA110B - Tank bag for the following Enduro motorcycles with specific base included

>EA116 - Tank bag with specific base included for HONDA NC 750 X(16 > 19)

Can be used on other makes / models of motorcycles, simply check compatibility of the base of your fuel tank with the dimensions shown opposite or use the straps provided.

BF_ _

Mount the specific BF_ _ kit to the fuel filler cap and fit the tanklock bag by positioning it on the flange using a slight amount of pressure.To release the bag, simply pull the red lever positioned on the base of the bagFlanges do vary, therefore you must check the compatibility list contained within the section “specific equipment for bikes and scooters”.

TANKLOCK TANK BAGS - Tanklock System


ACCESSORIESACCESSORIES

ACCESSORIES

The collection of GIVI products includes a wide variety of accessories that have all been designed with the purpose of helping to improve security, practicality and comfort whilst riding on two-wheels. Some products are dedicated to the rider, some to the passenger and some to the conveyance itself but each one is a worthy addition to our range.For example, from the child’s seat which is very useful around town; the universal satnav / smartphone holder or the telepass holder, easily adaptable to two or three wheeled machines; the very useful specific backrests that are mounted behind the seat right down to the breakdown kit including a warning triangle and reflective vest.Over the years, our selection of accessories has been continually expanding taking into consideration the needs of today’s motorcyclists and scooter riders. In respect of the two-wheeled machines themselves, we produce a wide range of accessories including engine bars which limit the damage in the event of a fall. Dedicated to the world of “off road” riding, we have introduced the brand new oil carter protectors which provide protection against impact from rocks and bumps on the road and there are the new universal halogen spotlights.There is also a motorcycle cover and a seat cover to provide protection from dust and rain, an aluminium case holder, tubeless tyre repair kit, the list goes on and on. Behind every single GIVI accessory is the dedicated and targeted research of the R&D Department based at Flero.

71EXPLORE. ENJOY.

ACCE

SSOR

IES

SPOTLIGHTS S310 TREKKER LIGHTSAdditional universal headlights, homologated, which can be easily mounted onto any engine guards with a tubular diameter between 21mm and 25mm. The cable kit with the relay and the fuse for direct linking to the battery are provided as standard, together with a waterproof switch that can be mounted to the handlebar. Also provided as standard, is a cable which can connect the lights to the ignition which ensures the lights are not left turned on.

S310 Additional halogen spotlights

Z2256Pair of halogen bulbs replacement 12V 55W H3 for spotlights S310

Z2257Pair of halogen bulbs replacement 12V 35W H3 for spotlights S310

SPOTLIGHTS S322 LED PROJECTORSPair of universal, certified anti-fog projectors, with black painted aluminium housing and LED technology that guarantees low energy consumption, making the S322 suitable for mounting on motorcycles with small engines, without the risk of draining the battery. Easily attached to all engine-guards with a tubular diameter of between 21mm and 25mm. Supplied with fuse and cables for direct connection to the battery and with a waterproof switch to mount on the handlebar. Also supplied with a third cable to connect to the motorcycle ignition lock. Only 14 W power absorption per light

S322Pair of universal, certified anti-fog projectors, with LED technology and black painted aluminium housing

SPOTLIGHTS SPECIFIC FITTING KIT FOR SPOTLIGHTSSpecific fitting kit for S310, S320 or S321 spotlights where specific engine guard is not presentCheck the section “MY MOTORCYCLE” to verify the availability per model


ACCESSORIES

SAFETY AND COMFORT VEST02 TREKKER VESTA high visibility vest certified in accordance with EN 1150:1999 Regulations. It combines a fluorescent yellow surface with reflective strips both at the front and rear zones. This vest is well suited to fit over various types of jacket. Hook & loop adjustment straps on the waist, side pockets with zippers. Breathable, high visibility yellow fabric. Customizable, clear and removable rear pocket: it can hold a copy of the license plate when riding off-road, or the logo of a motorcycle rally or event. Regulation EN1150 verifies the properties of high visibility clothing as being suitable for non-professional use only.Available sizes: S/M - L/XL - XXL/XXXL

VEST02-S/M

High visibility outer vest, with EN 1150:1999 approved.

VEST02-L/XL


VEST02-2XL/3XL


SAFETY AND COMFORT RRS04EX_ _ RIDERTECHPolyester waterproof suit comprising of two separate pieces; jacket and trousers. Equipped with reflective inserts, zipper opening with a double waterproof flap, ventilation on the back to improve breathability, internal net lining, internal waterproof pocket, closure at the wrist with elastic and hook and loop fastening fitting adjustments with hook and loop fastening at the forearm, neck and ankle. Waterproof to a water column of 3000 mm.Available sizes: S-M-L-XL-XXL-XXXL

RRS04EXN_Waterproof suit Ridertech Black, comprising of two separate pieces, black trousers and black jacket.

RRS04EXB_Waterproof suit Ridertech Blue, comprising of two separate pieces, blue trousers and blue jacket.

SPOTLIGHTS LP5112Specific protection in steel and anodized aluminium for original spotlights for BMW R1200GS Adventure (14 > 17).To be mounted only with the original optional spotlights.

LP5112BMW R1200GS Adventure (14 > 18)Specific protection in steel and anodized aluminium for original spotlights

73EXPLORE. ENJOY.

ACCE

SSOR

IES

SAFETY AND COMFORT S301 FIRST AID KITA First Aid Kit which fits into a practical little red case. Due to its colour, the case can be easily located either in a top-case or under a seat. Inside, you will find all you need should First Aid be required. Homologated (DIN13167 Law). The road laws of some Countries state that a rider is obliged to carry a First Aid Kit on board their motorbike. This Kit is useful in any situation that may be encountered whilst travelling either by motorbike, car or bicycle and for those who practice sport or pursue outdoor activities, it should be carried at all times.

S301 Portable first aid kit in compliance with DIN13167

SAFETY AND COMFORT S300 SAFETY KITThe Safety Kit is designed to fit inside an extremely compact case and provides two essential accessories:a reflective triangle and a reflective fluorescent vest.In a typical road emergency, such as instances of impact, breakdrown, emergency stop etc, it is essential to signal your presence to other road users.The dimensions of the kit are: 440 x 70 x 70 mm

S300 Complete safety

SAFETY AND COMFORT S650 BABY RIDEAdaptable to the majority of scooter models currently available on the market, the S650 ensures children from 5 to 8 years have the correct seating position.Made in foam polyurethane (Black colour) with metal base, it is fixed using appropriate universal arms on the sides of the motorcycle. There is no seat belt which will keep the child tied to the seat (such as those present on bicycle seats) the mere presence of an adult on the front seat is enough to avoid the child moving forward.

S650 Child's seatS650KIT Kit with long brackets for S650

Child's seatBefore use, verify the country legislation regarding pillion passengers and road safety* n.4 long brackets for the mounting of S650 Child's seat on scooters


ACCESSORIES

SAFETY AND COMFORT STF500SStainless-steel thermal flask 500ml. It keeps water hot or cold for up to 12 hours. Anodised aluminium snap-hook. BPA free.Double wall, max liquid temperature 100 ° C, dishwasher safe, compatible with most bottle holders.

STF500S Stainless-steel thermal flask, 500ml

E162

Support in stainless steel for thermal flask. Compatible with OBK110A / OBK58 / OBK42 / OBK48 / OBK37 TREKKER OUTBACK, DLM30 / DLM36 / DLM46 TREKKER DOLOMITI and TRK33 / TRK46 TREKKER

SAFETY AND COMFORT S220Padlock with a retractable steel cable. Can be used to fasten together helmets using the ring on the chin guard, or to fasten together technical garments using the loop on the clothing.

S220 Padlock with retractable wire and combination lock

SAFETY AND COMFORT S450 TUBELESS TYRES REPAIR KITTyres repair kit. Contains: N. 3 x CO2 cans, N. 1 x Connector complete with valve, N. 1 x Flexibile tube, N. 1 x Cutter, N. 5 x Sealing strips, N. 2 x Specific utensils, N. 1 x Tube of adhesive

S450 Tubeless tyres repair kit

S450KITSet of three CO2 cans for the Tubeless Tyres Repair Kit (S450).

75EXPLORE. ENJOY.

ACCE

SSOR

IES

SAFETY AND COMFORT S221Unlike hard cases, soft bags do not have a lock and because of this, when reaching your destination, it is suggested that soft bags are removed from a motorbike. As we understand that this can be frustrating, the Givi S221 wire padlock can be used to secure soft bags to a motorbike. It locks the zip and blocks it, ensuring the bag is locked to either the handlebar or the rear rack

S221 Wire padlock for soft bags, with combination lock.

SAFETY AND COMFORT TM418Hand protectors made in rain resistant polyester with an internal lining that keeps the fingers warm in all conditions. The use is universal as TM418 adapts to every type of handle-bar and rear-view mirror. The structure is rather rigid for easier and quicker accessibility of the hands.Inner linning: lambkin

TM418Pair of protective handle-bar gloves for motorcycles and scooters adjustable for use with fixed mirror.

SAFETY AND COMFORT TM421Universal motorcycle muffs with hand-guards. Equipped with left/right fixing strap with quick-release clips, rigid insert to keep the wrist open, reflective prints. Each muff has two points to attach it to the handlebar: 1. Exterior: direct attachment to the handlebar with the use of straps and elastic bungees.2. Interior: attachment to the hand-guard with straps (to adjust position). Materials: 1200D polyester, anti-UV compliant with ISO 4892-2 regulation - PE padding.Materials compliant with REACH regulations.

TM421 Universal motorcycle muffs with hand-guards


ACCESSORIES

SAFETY AND COMFORT TC400In order to maximize comfort when riding motorcycles and scooters during the winter season, GIVI has released the new NECK SAFER TC400. It is designed to be worn under the jacket collar and its role is to protect the neck from annoying cold air draughts. Thanks to easy and adjustable closing with hook and loop fastening it is adjustable to any size. Filled with soft filling and covered with a special pile fabric, the TC400 ensures a soft, warm sensation.Material: soft filling / pile fabricTC400 Neck safer

S900A SMART BARThe Smart Bar support is an anodized aluminum piece worked with a cutter, that is adjustable and with its two lower slots, can be geared to fit a large number of different motorcycle models. Please refer to the section “specific equipment for bikes and scooters” to identify the correct item for your motorcycle. To be combined with the specific screw kit _ _ _SKIT.Material: aluminium

S900AUniversal aluminium handle bar to install GPS holders, Smartphone holders, electronic device holders for road use.

01SKIT Specific kit to mount the S900A Smart Bar or the S901A Smart Mount






S902AUniversal anodized aluminium support for STTR40SM, SGZ39SM, S952B, S953B, S954B, S955B, S956B, S957B to be mounted onto steel tubes with a diameter of between 11.5mm and 14 mm. To be mounted on motorbikes with a cross piece located behind the windshield with a diameter between 11.5mm and 14mm, or on the upper fairing brackets FB_ _ _

S902A

Universal anodized aluminium support to install GPS and smartphone holders S952B, S953B, S954B, S955B, S956B, S957B and GPS holders SGZ39SM and STTR40SM

SGZ39SM

Anodized aluminium and stainless steel handle bar to install GPS Garmin Zumo (345LM, 390LM, 395LM, 590LM, 595LM, 220, 350, 400, 450, 550, 340, 660, 345, 395, 595) on S901A Smart Mount and S902A

STTR40SMAluminium support to install GPS Tom Tom Rider (40, 400, 410, 450, II, 500, 550) on S901A Smart Mount and S902A

FB_ _ _*Fairing upper bracket to be mounted behind the windshield to install S902A, S920M, S920L and GPS-Smartphone holder

* Please refer to the section “specific equipment for bikes and scooters” to verify compatibility

77EXPLORE. ENJOY.

ACCE

SSOR

IES

S901A SMART MOUNTThe S901A Smart Mount is a universal support incorporating a section made from a single piece of machined anodized aluminium. It enables the following GIVI Sat-Nav-smartphones holders; S952B, S953B, S954B, S955B, S956B and S957B to be mounted to the middle of a handlebar both quickly and easily. If combined with the specific adapter, the S901A can also be used to mount; the Tom Tom Rider (40, 400, 410, II, 500, 550...) and Garmin Zumo (395LM, 590LM…) Sat-Navs.

S901AUniversal support in billed and anodized aluminium for gps / smartphones-holders


SGZ39SM








COMPATIBILITÀ _ _ SKIT

APRILIA01SKIT Shiver 750 / Shiver GT 750 (07 > 12) / ABS (09 > 12)

01SKIT Shiver 750 / ABS (10 > 16)

01SKIT Dorsoduro 750 / Dorsoduro 1200 (08 > 16)

01SKIT Mana 850 / Mana 850 GT (08 > 16)

01SKIT Tuono V4 R (11 > 14)

01SKIT Caponord 1200 (13 > 17)

BENELLI03SKIT BN302 (15 > 18)

05SKIT TRK502 (17 > 18)

03SKIT BN600 (13 > 17)

BMW05SKIT G 310 R (17 > 18)

05SKIT G 310 GS (17 > 18)

01SKIT F 650 GS / F 800 GS (08 > 17)

01SKIT G 650 GS (11 > 17)

01SKIT F 700 GS (13 > 17)

01SKIT F 750 GS (18)

01SKIT F 800 GS Adventure (13 > 18)

01SKIT F 800 GT (13 > 18)

01SKIT F 800 R (09 > 14)

05SKIT F 800 R (15 > 18)

01SKIT F 850 GS (18)

01SKIT S 1000 XR (15 > 18)

01SKIT R 1200 GS Adventure (06 > 13)

01SKIT R 1200 GS Adventure (14 > 18)

01SKIT R 1200 GS (04 > 12)

01SKIT R 1200 GS (13 > 18)

04SKIT R 1200 R (11 > 14)

01SKIT R 1200 R (15 > 18)

01SKIT R 1200 RS (15 > 18)

04SKIT R 1200 RT (05 > 13)

01SKIT R NINE T (14 > 18)

01SKIT R Nine T Scrambler (16 > 18)

DUCATI03SKIT Monster 695

05SKIT Monster 696 / 796 / 1100 (08 > 14)

03SKIT Monster S2R / S4R / S4RS 800 / 1000 (04 > 08)

03SKIT Hypermotard 796 / 1100 (12 > 14)

03SKIT Hyperstrada 821 (13 > 16)

04SKIT Streetfighter 848 / 1098 (09 > 15)

03SKIT Hypermotard 939 (16 > 18)

03SKIT Hyperstrada 939 (16)

04SKIT Multistrada 950 (17 > 18)

04SKIT Multistrada 1200 (15 > 18)

04SKIT Multistrada Enduro 1200 (16 > 18)

05SKIT Monster 1200 (14 > 18)

HONDA01SKIT CB 125 R (18 > 19)

03SKIT XL 125V Varadero (01 > 06)

03SKIT XL 125V Varadero (07 > 14)

02SKIT CB 500 F (13 > 15)

02SKIT CB 500 F (16 > 18)

02SKIT CB 500 X (13 > 18)

01SKIT CBF 600S/ CBF 600N (04 > 12)

02SKIT Hornet 600 / Hornet 600 ABS (07 > 10)

To discover whether an “_ _ SKIT” screw kit exists for your specific model of motorcycle, Please refer to the section “specific equipment for bikes and scooters” to verify compatibility. All Trademarks, Names and PDA models are property of the respective Companies


ACCESSORIES

02SKIT Hornet 600 / Hornet 600 ABS (11 > 13)

02SKIT CB650 F / CBR650F (14 > 16)

02SKIT CB 650F (17 > 18)

01SKIT CTX 700 DCT (14 > 16)

01SKIT CTX 700N DCT (14 > 16)

02SKIT NC700S (12 > 13) / NC750S / NC750S DCT (14 > 15)

02SKIT NC700X (12 > 13) / NC750X / NC750X DCT (14 > 15)

03SKIT XL 700V Transalp (08 > 13)

02SKIT Africa Twin 750 (93 > 95)

02SKIT NC750S (16 > 18)

02SKIT NC750X (16 > 18)

03SKIT Crossrunner 800 (15 > 18)

01SKIT VFR 800 F (14 > 18)

04SKIT CB 1000 R (08 > 17)

01SKIT CB 1000 R (18)

02SKIT CBF 1000 / CBF 1000 ST (10 > 14)

03SKIT CRF1000L Africa Twin (16 > 17)

03SKIT CRF1000L Africa Twin (18)

03SKIT CRF1000L Africa Twin Adventure Sports (18)

01SKIT CB 1100 (13-14)

03SKIT Crosstourer 1200 / Crosstourer 1200 DCT (12 > 18)

01SKIT CTX 1300 (14 > 16)

KAWASAKI05SKIT Z300 (15 > 16)

02SKIT Versys-X 300 (17 > 18)

05SKIT KLE 500 (91 > 00)

03SKIT ER-6n / ER-6f 650 (09 > 11)

03SKIT ER-6n / ER-6f 650 (12 > 16)

03SKIT Versys 650 (06 > 09)

03SKIT Versys 650 (10 > 14)

05SKIT Versys 650 (15 > 18)

05SKIT Z 750 (03 > 06)

05SKIT Z 750 (07 > 14)

05SKIT Z 750 S (05 > 07)

02SKIT Z 800 (13 > 17)

02SKIT W 800 (11 > 17)

05SKIT Z 900 RS (18)

02SKIT Versys 1000 (12 > 14)

05SKIT Versys 1000 (15 > 16)

05SKIT Versys 1000 (17 > 18)

KTM03SKIT Duke 125-200-390 (11 > 16)

05SKIT Duke 125-390 (17 > 18)

01SKIT DUKE 690 (12 > 18)

05SKIT Duke 790 (18)

01SKIT Adventure 950 / 990 (03 > 14)

01SKIT 990 SMT (09 > 16)

01SKIT Super Duke 990

05SKIT 1050 Adventure (15 > 16) / 1090 Adventure (17 > 18)

01SKIT 1190 Adventure / Adventure R (13 > 16)

05SKIT 1290 Super Adventure (15 > 16) / 1290 Super Adventure T (17)

05SKIT 1290 Super Adventure R (17 > 18)

05SKIT 1290 Super Adventure S (17 > 18)

MASH02SKIT Seventy Five 125 (14 > 18)

MOTO GUZZI01SKIT Stelvio 1200 (08 > 16)

03SKIT V9 Roamer / V9 Bobber (16 > 18)

SUZUKI05SKIT DL 650 V-Strom (04 > 11)

05SKIT DL 650 V-Strom L2-L3-L4-L5-L6 (11 > 16)

05SKIT DL 650 V-Strom (17 > 18)

05SKIT Gladius 650 (09 > 16)

05SKIT GSF 650 Bandit / Bandit S / Bandit ABS (05 > 06)

05SKIT GSF 650 Bandit / GSF 650 Bandit S K9-L0-L1-L2-L3-L4 (09 > 15)

05SKIT GSX 650F (08 > 14) / GSX 1250F (10 > 16)

05SKIT SV 650 (16 > 18)

03SKIT GSX S750 (17 > 18)

05SKIT GSR 750 (11 > 16)

02SKIT DL 1000 V-Strom (14 > 16)

02SKIT DL 1000 V-Strom (17 > 18)

05SKIT GSX S1000F / GSX S1000 (15 > 18)

05SKIT GSF 1250 Bandit / Bandit S (07 > 11)

TRIUMPH05SKIT Street Triple 765 (17 > 18)

01SKIT Tiger 800 / 800 XC / 800 XR (11 > 17)

01SKIT Tiger 800 XC / 800 XR (18)

05SKIT Street Twin 900 (16 > 18)

05SKIT Street Scrambler 900 (17 > 18)

04SKIT Speed Triple 1050 (11 > 15)

01SKIT Speed Triple 1050 (16 > 17)

01SKIT Tiger Sport 1050 (13 > 18)

01SKIT Tiger Explorer 1200 (12 > 15)

YAMAHA05SKIT WR250R (08 > 13)

05SKIT MT-03 321 (16 > 18)

01SKIT FZ6 S2 / FZ6 600 Fazer S2 (07 > 11)

05SKIT XJ6 (09 > 12) / XJ6 Diversion / XJ6 Diversion F 600 (09 > 13)

05SKIT XJ6 600 (13 > 15)

06SKIT MT-07 Tracer (16 > 18)

05SKIT FZ8 / Fazer 8 800 (10 > 15)

01SKIT MT-09 (13 > 16)

01SKIT MT-09 (17 > 18)

04SKIT MT-09 Tracer (15 > 17)

05SKIT TDM 900 (02 > 14)

01SKIT XSR900 (16 > 18)

04SKIT Tracer 900 / Tracer 900 GT (18)

05SKIT FZ1 1000 (06 > 15)

01SKIT MT-10 (16 > 18)

01SKIT XT1200ZE Super Tenerè (14 > 18)

05SKIT XJR 1300 (07 > 14)

ZERO MOTORCYCLES05SKIT Zero DS (18)

79EXPLORE. ENJOY.

ACCE

SSOR

IES

S920M SMART CLIP

S920L SMART CLIP

S903A SMART MOUNT_RCUniversal CNC made anodized aluminium support to install on the brake fluid reservoir cover the GPS and smartphone holders S952B, S953B, S954B, S955B, S956B, S957BPlease refer to the section “specific equipment for bikes and scooters” to identify the correct item for your motorcycle. To be combined with the specific screw kit _ _ _VKIT.Material: aluminium

S903A

Universal CNC made anodized aluminium support to install on the brake fluid reservoir cover the GPS and smartphone holders S952B, S953B, S954B, S955B, S956B, S957B

01VKIT Specific kit to mount the Smart Mount RC S903A



Designed to avoid interfering with the camera on most smartphones. Easy lock and release of the device. All components remain attached to each other, even after being removed from the vehicle. Also included is a “GRIP+” elasticated safety strap.

Designed to avoid interfering with the camera on most smartphones. Easy lock and release of the device. All components remain attached to each other, even after being removed from the vehicle. Also included is a “GRIP+” elasticated safety strap.

Universal smartphone holder pliers. A patented product that has been designed and made in Italy. Compatible with: motorcycle, scooter, bicycle, quad, snowmobile. Compatible with diameters between 8mm and 35 mm. Ability to fit around sections that are not perfectly circular and with a maximum diameter of 37mm. Maximum thickness of device: 13 mm.

S920MUniversal smartphone holder pliers to mount on motorcycles, scooters, bicycles and quads. For devices with external dimensions from 112 x 52mm to 148 x 75mm.

FB_ _ _*

Fairing upper bracket to be mounted behind the windshield to install S902A, S920M, S920L and GPS-Smartphone holder

S110 12V Handlebar electrical outlet socket.S112 Power Connection kit for the electrical feed

to devices fitted directly on the handlebar.

T519MWaterproof sleeve for smartphone. External dimensions: 160 x 95 mm. Dimensions of window: 140 x 65 mm. Ideal for use with Smart Clip S920M

* Please refer to the section “specific equipment for bikes and scooters” to verify compatibility* Comprehensive kit of 4 Pin adapters (Micro USB, Mini USB, Apple Dock and Apple Lightning).

Universal smartphone holder pliers. A patented product that has been designed and made in Italy. Compatible with: motorcycle, scooter, bicycle, quad, snowmobile. Compatible with diameters between 8mm and 35 mm. Ability to fit around sections that are not perfectly circular and with a maximum diameter of 37mm. Maximum thickness of device: 13 mm

S920LUniversal smartphone holder pliers to mount on motorcycles, scooters, bicycles and quads. For devices with external dimensions from 144 x 67mm to 178 x 90mm.

FB_ _ _*

Fairing upper bracket to be mounted behind the windshield to install S902A, S920M, S920L and GPS-Smartphone holder

S110 12V Handlebar electrical outlet socket.S112 Power Connection kit for the electrical feed

to devices fitted directly on the handlebar.

T519LWaterproof sleeve for smartphone. External dimensions: 175 x 100 mm. Dimensions of window: 155 x 75 mm. Ideal for use with Smart Clip S920L

* Please refer to the section “specific equipment for bikes and scooters” to verify compatibility* Comprehensive kit of 4 Pin adapters (Micro USB, Mini USB, Apple Dock and Apple Lightning).


ACCESSORIES

T519Waterproof sleeve for smartphone.Available two different sizes: T519M, T519L

T519M

Waterproof sleeve for smartphone. External dimensions: 160 x 95 mm. Dimensions of window: 140 x 65 mm. Ideal for use with Smart Clip S920M

T519L

Waterproof sleeve for smartphone. External dimensions: 175 x 100 mm. Dimensions of window: 155 x 75 mm. Ideal for use with Smart Clip S920L

S952B / S953B / S954B

FB_ _ _Upper fairing bracket to be mounted behind the motorcycle's screen, diameter 12mm.The bracket provides the support needed to mount a sat-nav / GPS smartphone holder in the best position, i.e. above the control panel, avoiding the need to look down at a device whilst riding.It is possible to mount GIVI device holders directly onto the FB_ _ _ or alternatively, the elegant S902A support, machined from solid aluminium, which can be used to mount the various device holders etc without using the nylon mounting system, providing the bike with a highly technical look. Also compatible with the universal smartphone holder pliers S920M - S920LThe range of upper fairing brackets can also be used in conjunction with the following models of Sat Nav; Tom Tom Rider (40, 400, 410, II, 42, 420, 450, 500, 550) and Garmin Zumo (390LM, 590LM, 220,350,400,450,550,340,660,345,395,595).

Please refer to the section “specific equipment for bikes and scooters” to verify compatibility

Universal GPS-Smartphone holder. Equipped withsafety strap and raincover, touch sensitive transparent surface sunshade, opening at the bottom to allow power supply to the device, zip closure with waterproof flap. Compatible with GIVI power connection.S952B Universal GPS-Smartphone holder. S953B Universal GPS-Smartphone holder. S954B Universal GPS-Smartphone holder.

S951KIT2Universal mounting kit for S95_, S95_B to fit on motorcycles fitted with handlebar risers


S112 sPower Connection kit for the electrical feed to devices fitted directly on the handlebar.


S901A Universal support in billed and anodized aluminium for gps / smartphones-holders

S902AUniversal anodized aluminium support to install GPS and smartphone holders S952B, S953B, S954B, S955B, S956B, S957B and GPS holders SGZ39SM and STTR40SM

S903AUniversal CNC made anodized aluminium support to install on the brake fluid reservoir cover the GPS and smartphone holders S952B, S953B, S954B, S955B, S956B, S957B

FB_ _ _**Fairing upper bracket to be mounted behind the windshield to install S902A, S920M, S920L and GPS-Smartphone holder

* Comprehensive kit of 4 Pin adapters (Micro USB, Mini USB, Apple Dock and Apple Lightning).* Please refer to the section “specific equipment for bikes and scooters” to verify compatibility

81EXPLORE. ENJOY.

ACCE

SSOR

IES

S955B / S956B / S957B

SGZ39SM

STTR40SM

Universal Smartphone holder. Equipped with safety strap and raincover, touch sensitive transparent surface, sunshade, opening at the bottom to allow power supply to the device, zip closure with waterproof flap. Compatible with GIVI power connection.S955B Universal Smartphone holder. S956B Universal Smartphone holder. S957B Universal Smartphone holder. S951KIT2 Universal mounting kit for S95_, S95_B to fit

on motorcycles fitted with handlebar risersS110 12V Handlebar electrical outlet socket.

S112 s Power Connection kit for the electrical feed to devices fitted directly on the handlebar.


S901A Universal support in billed and anodized aluminium for gps / smartphones-holders


S903AUniversal CNC made anodized aluminium support to install on the brake fluid reservoir cover the GPS and smartphone holders S952B, S953B, S954B, S955B, S956B, S957B


* Comprehensive kit of 4 Pin adapters (Micro USB, Mini USB, Apple Dock and Apple Lightning).* Please refer to the section “specific equipment for bikes and scooters” to verify compatibility

Anodized aluminium and stainless steel support to install GPS Garmin Zumo (345LM, 390LM, 395LM, 590LM, 595LM, 220, 350, 400, 450, 550, 340, 660, 345, 395, 595) on S901A Smart Mount or S902A. To be combined with S901A Smart Mount or S902A and the specific screw kits _ _ _SKIT.Please refer to the section “specific equipment for bikes and scooters” to verify compatibility

SGZ39SM






Anodized aluminium support to install GPS Tom Tom Rider (40, 400, 410, 450, II, 500, 550) on S901A Smart Mount and S902A. To be combined with S901A or S902A and the specific screw kit _ _ _SKIT.Please refer to the section “specific equipment for bikes and scooters” to verify compatibility


FBFairing upper bracket to be mounted behind the windshield to install S902A, S920M, S920L and GPS-Smartphone holder


S902A

Universal anodized aluminium support to install GPS and smartphone holders S952B, S953B, S954B, S955B, S956B, S957B and GPS holders SGZ39SM and STTR40SM



ACCESSORIES

STTR40Universal support to mount either the GPS Tom Tom Rider (40, 400, 410, II, 42, 420, 450, 500, 550) on tubular handlebars or on the stalk of a rearview mirror Compatible with tubular handlebars with a diameter of 8 to 35 mm

STTR40

Universal support to mount either the GPS Tom Tom Rider (40, 400, 410, II, 42, 420, 450, 500, 550) on tubular handlebars or on the stalk of a rearview mirror

FB_ _ _*Fairing upper bracket to be mounted behind the windshield to install S902A, S920M, S920L and GPS-Smartphone holder


S601Holder designed for the motorway toll paying device "TELEPASS"*. Shell material: nylon. PLEASE NOTE: This holder has been developed for the Italian TELEPASS*. It is important to always check the dimensions and functionality with respect to devices available in other countries. *TELEPASS is a registered trademark belonging to Atlantia and Austostrade of ltaly. All trademarks, names and PDA models are property of the respective Companies.

S601Holder designed for the motorway toll paying device "TELEPASS"*.

* TELEPASS is a registered trademark belonging to Atlantia and Austostrade of ltaly. / All trademarks, names and PDA models are property of the respective Companies

S602Waterproof, removable holder designed for the motorway toll paying device "TELEPASS"*. It is attached to a motorcycle using adhesive tabs. Shell material: nylon. PLEASE NOTE: This holder has been developed for the Italian TELEPASS*. It is important to always check the dimensions and functionality with respect to devices available in other countries. *TELEPASS is a registered trademark belonging to Atlantia and Austostrade of ltaly. All trademarks, names and PDA models are property of the respective Companies.

S602

Waterproof, removable holder designed for the motorway toll paying device "TELEPASS"*. It is attached to a motorcycle using adhesive tabs.

* TELEPASS is a registered trademark belonging to Atlantia and Austostrade of ltaly. / All trademarks, names and PDA models are property of the respective Companies

83EXPLORE. ENJOY.

ACCE

SSOR

IES

S110 POWER SOCKET12V Handlebar electrical outlet socket. Equipped with fuse and battery connectors, adhesive clips, fully waterproof. This kit creates an independent circuit from the ignition system of the motorcycle in order to protect it from possible overloads. Reduced sized, compared to a standard Cigarette lighter port.To be combined with the S111 Power Hub or with the S112 Power Connection




* Comprehensive kit of 4 Pin adapters (Micro USB, Mini USB, Apple Dock and Apple Lightning).

S111 POWER HUBHub kit for the electrical feed for tank bags. It supplies three devices through the USB ports and a fourth device with the ISO 12v Internal Power connector.Fully waterproof external wiring kit. It allows the charging of three devices with USB ports for a total of 9000 mA (3x3000 mA). It is possible to use original USB cables from devices without purchasing further adapters. To be specifically combined with the S110 kit



S112 POWER CONNECTIONPower Connection kit for the electrical feed to devices fitted directly on the handlebar. Cable complete with a transformer which permits the direct connection with the devices. To be specifically combined with the S110 KitComprehensive kit of 4 adapters:1) Micro USB socket, compatible with most Android Smartphones.2) Mini USB socket, compatible with most cameras and camcorders. 3) Apple Dock connection, compatible with: iPhone 3, 4; iPad 1, 2, 3, 4; iPod Classic; iPod Nano 1, 2, 3, 4, 5, 6; iPod Shuffle 1, 2, 3, 4.4) Apple Lightning compatible with: iPhone 5, 5c, 5s, 6, 7, 7 Plus, 8, 8 Plus, XR, XS e XS, iPod Touch 5G, iPad4 e iPod Nano 7G.



* Comprehensive kit of 4 Pin adapters (Micro USB, Mini USB, Apple Dock and Apple Lightning).


ACCESSORIES

EXTRA CARGO S350-S351 - TREKKER STRAPSS350 - Width 25 mm and length 1700 mm. Maximum traction load 100 kg.S351 - Width 20 mm and length 1000 mm. Maximum traction load 75 kg.



EXTRA CARGO EX1SRA BAG HOLDERExpandable aluminium bag holder to fit to the aluminium rear supports SRA_ _ and onto the plates M8A - M8B. Width from 413 to 513 mm.Suitable for the transportation of roll bags with a capacity from 30 to 50 Ltr. Max load 6 Kg

EX1SRAExpandable aluminium bag holder to fit on the aluminium rear supports SRA_ _ and on the plates M9A - M9B.



EXTRA CARGO EX2MAnodized aluminium bag holder to attach to M5 and M7 MONOKEY® plates or to M5M and M6M Monolock plates, or directly to the specific metal supports for the previously listed plates. Made in brushed anodised aluminium. Supplied with belt straps. Suitable for carrying large bags up to 50 ltr in capacity. Maximum load 6 kg. Size: length 420mm x Width 300mm.

EX2M

Anodized aluminium bag holder to attach to M5 and M7 MONOKEY® plates or to M5M and M6M MONOLOCK® plates, or directly to the specific metal supports for the previously listed plates


85EXPLORE. ENJOY.

ACCE

SSOR

IES

EXTRA CARGO S150Universal small nylon rack, compatible with most GIVI MONOKEY® cases and with many other models of cases produced by the major motorcycle manufacturers. Other characteristics: 6 belt strap loops, 6 fixing points to attach the hooks of an elasticated cargo net, universal kit which, with the use of semi spheres, allows the rack to be adapted to the curves of a large number of different cases.

S150 Universal small nylon rackT10N Elastic carrying net, black, 1

pieceS351 Pair of Trekker Strap belts,

maximum traction load 75 kg.

EXTRA CARGO S410Universal Trolley Base for MONOKEY® top-case. Compatible with all MONOKEY® top-cases. To be combined with a MONOKEY® fitting plate. Security Lock system. “Anti-noise”, replaceable padded wheels. Handle with long retractable extension. Six fixing points to attach the hooks of an elasticated net


EXTRA CARGO TAN01Homologated Jerry can 2.5 ltr suitable for the transportation of fuel, water or oil

Dimensions: 170x235x95mm

TAN01Homologated Jerry can 2.5 ltr suitable for the transportation of fuel, water or oil.

E149Support in stainless steel to mount the tank TAN01 onto TRK33N, TRK33B, TRK46N, TRK46B.

E148Removable support in stainless steel to mount the tank TAN01 on Trekker Outback cases


ACCESSORIES

EXTRA CARGO E163Universal support for the transportation of metal Jerry cans (5-10 ltr) on the specific pannier holders; PL, PLR or PL_ _ _ CAM. If combined with E163KIT, the E162 (thermal flask support) and the S250 (tool box) can also be mounted. (Installation of the S250 is not guaranteed on all models of motorcycle)

E163Universal support for the transportation of metal Jerry cans (5-10 ltr) on the specific pannier holders; PL, PLR or PL_ _ _ CAM.

S250

Tool box to be mounted between the side-case holder and motorcycle fairing. TO BE COMBINED WITH THE UNIVERSAL FIXING KIT S250KIT OR WITH SPECIFIC FIXING KIT TL

E163KIT

Specific kit to also mount the E162 (thermal flask support) and the S250 (tool box) on the E163. (Installation of the S250 is not guaranteed on all models of motorcycle)

STF500S Stainless-steel thermal flask, 500ml

EXTRA CARGO S250 TOOL BOXTool box to be mounted between the side-case holder and motorcycle fairing. Security Lock closure with standard screw top dust-cover. Made in reinforced technopolymer. Size: length 260mm x Width 90mm x Height 170mm. This product must be coupled with the universal fixing kit S250KIT or with specific fixing kit TL_ _ _ _KIT.

S250

Tool box to be mounted between the side-case holder and motorcycle fairing. TO BE COMBINED WITH THE UNIVERSAL FIXING KIT S250KIT OR WITH SPECIFIC FIXING KIT TL

S250KITUniversal kit to install the S250 Tool Box on specific pannier holder PL, PLR, PL….CAM, PLR…CAM

T515Roll-top bag with tool compartment and hook (compatible with M.O.L.L.E.). Suitable to be placed inside the S250 TOOLBOX.

* In the event that the S250 Tool Box and S250KIT are mounted on a side-case holder and compatibility has not been verified by GIVI, then before hitting the road, it is essential to check that nothing (including the Tool Box) interferes with the full range of movements of the swingarm.

EXTRA CARGO T10NElastic carrying net to secure a variety of objects to the lid of a top-case or to the luggage carrier of the motorcycle.

T10N Elastic carrying net, black, 1 piece

T10 Elastic carrying net, black, 12 pieces

E125Four ring kit to anchor T10N elastic net. The rings must be anchored to the case by making four holes of ø10mm

87EXPLORE. ENJOY.

ACCE

SSOR

IES

EXTRA CARGO T25Material: Polyurethane

T25Anti-slip net to protect paintwork from saddlebags (cannot be used in conjunction with magnetic bags).

MANIFOLD PROTECTORS - S280-S281-S282Pair of 316L stainless steel universal manifold protectors. S280 - Suitable for motorcycles with manifold diameters between 32 mm and 42 mm. S281 - Suitable for motorcycles with manifold diameters between 42 mm and 52 mm. S282 - Suitable for motorcycles with manifold diameters between 52 mm and 60 mm.

S280 sPair of 316L stainless steel universal manifold protectors. Suitable for motorcycles with manifold diameters between 32 mm and 42 mm.

S281Pair of 316L stainless steel universal manifold protectors. Suitable for motorcycles with manifold diameters between 42 mm and 52 mm.

S282 sPair of 316L stainless steel universal manifold protectors. Suitable for motorcycles with manifold diameters between 52 mm and 60 mm.

RM01Universal spray guard, which needs to be paired with the specific mounting kit (RM_ _ _ _KIT), which varies according to the model of motorcycle. The fitting kit is sold separately (it is important to check that the specific fitting kit is produced for the individual motorcycle). Made in ABS with a metallic insert.Please refer to the section “specific equipment for bikes and scooters” to verify the availability of a fitting kit compatible with a specific model of motorcycle

RM01 Universal spray guard


ACCESSORIES

RM02Universal spray guard, which needs to be paired with the specific mounting kit (RM_ _ _ _KIT), which varies according to the model of motorcycle. The fitting kit is sold separately (it is important to check that the specific fitting kit is produced for the individual motorcycle). Made of nylon and reinforced by fiberglass. Please refer to the section “specific equipment for bikes and scooters” to verify the availability of a fitting kit compatible with a specific model of motorcycle

RM02 Universal spray guard

SLD01

S290Heat guard for soft side bags. Material: anodised aluminium. With an adhesive fabric band that is resistant to high temperatures which prevents contact between the support and the exhaust whilst protecting the exhaust . Available in two sizes. To be combined with CLAMP_ _ steel bands kit

S290S Universal anodised aluminium heat guard, size S (length 150mm)

S290M Universal anodised aluminium heat guard, size M (length 200mm)

CLAMP100316 stainless steel band kit, to mount the S290S or the S290M heat guards onto exhausts with a diameter between 80mm and 100mm




Our frame sliders, exclusively engineered and manufactured in Italy, are characterized by an aerodynamic shape and are made using high quality materials: polymer main body, fiberglass reinforced, for an optimal resistance to repeat impact and wear. It also offer higher surface protection against solvents, oil and moisture. There are no visible external bolts, for a cleaner look and easier installation and removal. CNC anodized aluminum insert available in 4 colours, with laser engraved GIVI graphics.Please refer to the section “specific equipment for bikes and scooters” to verify compatibility

SLD01ALFrame slider made in polymer reinforced in Fiberglass with CNC made anodized aluminium insert

SLD01REFrame slider made in polymer reinforced in Fiberglass with red CNC made anodized aluminium insert

SLD01GRFrame slider made in polymer reinforced in Fiberglass with green CNC made anodized aluminium insert

SLD01BKFrame slider made in polymer reinforced in Fiberglass with black CNC made anodized aluminium insert

89EXPLORE. ENJOY.

ACCE

SSOR

IES

BIKE AND SEAT COVERS S200Provides dust protection during the winter months. Material: transpirant texture

S200Universal bike cover, not waterproofColour: light grey

BIKE AND SEAT COVERS S202L-S202XLWaterproof bike cover. Equipped with thermo-sealed seams to ensure complete water resistance, closure at the base with straps and clips, front and rear holes to allow a chain to be passed through the wheel, elastic strap at the base to improve adherence to the vehicle. Material: Polyester 210D Oxford, colour: black with silver print and seams in a contrasting colour. S202L: Suitable for: small scooter, naked, sports, and classic bikes. h. 125>100 x l. 205 x w. 70>95. S202XL: Suitable for: maxiscooter, sport-tourer, tourer, enduro, custom. h. 125>110 x l. 238 x w. 70>95

S202LMotorcycle waterproof rain-covering for sport and scooters models

S202XLMotorcycle waterproof rain-covering for big motorcycles and scooters

BIKE AND SEAT COVERS S210Waterproof covering, black coloured, in order to protect the seat from rain and dust.Produced with elasticated sides and adjustable fixing belt which enables it to be adapted to different seat widths.

S210 Universal waterproof seat covering


AIRSTARS & SPOILERS

AIRSTARS &SPOILERS

In respect of styles and materials used, the collection of GIVI screens is the largest on the market and takes into consideration all the current trends. The range includes screens and aerodynamic spoilers equipped with specific fitting kits for the most popular naked, road and sporty motorcycles.The collection also provides solutions for tourer, sport-tourer and cruiser motorcycles with both universal and dedicated screens and windshields available.Finally, there is the scooter world for which GIVI has long been renowned, windscreens are available for a large number of models from 50cc to the larger engine capacities.In terms of our latest news, we draw attention to the Airstar screens for scooters complete with serigraphy at the base to provide a strong visual impact and there is the new entry Airflow, the windscreen with an adjustable upper spoiler, designed by the GIVI R&D Department, which is unrivalled in terms of versatility and protection.

91EXPLORE. ENJOY.

AIRST

ARS &

SPOI

LERS

Shield+ is made entirely of billed aluminium that is manufactured one piece at a time using numerical controlled milling, finished by hand then finally anodized. Due to its excellent weight-performance and high resistance to corrosion, this high quality raw material is also used in aeronautical engineering. The screen is 4mm thick and is made from polymeric material approved by TUV. Compared to glass, it is more transparent and is half the weight of glass.- Fitting is both simple and safe. In fact, installation does not require any modification of the existing windshield.- Shield+ will fit onto any form of motorcycle / scooter windshield and lock keys are included as standard. - The sleeves are made of a technical material that does not damage the existing windshield and guarantees optimum grip, even at high speed, making the shield+ reliable protection to deflect airflow.

S180T SHIELD+Universal transparent spoiler mountable to fairings / windscreens; the aluminium fitting kit allows to adjust both height and inclination. The customer needs to confirm the original fairing/windscreen is rigid enough to allow the mounting of the SHIELD +

S180T

Universal transparent spoiler that can be mounted to fairings / windscreens; the aluminium fitting kit allows both the height and angle to be adjusted.

S180F SHIELD+Universal smoked spoiler mountable to fairings / windscreens; the aluminium fitting kit allows to adjust both height and inclination. The customer needs to confirm the original fairing/windscreen is rigid enough to allow the mounting of the SHIELD +

S180F

Universal smoked spoiler that can be mounted to fairings / windscreens; the aluminium fitting kit allows both the height and angle to be adjusted.


AIRSTARS & SPOILERS

COLLECTIONThe appeal of “naked” motorcycles continues to interest a great many riders and it is for these motorcyclists that GIVI has created and produced a range of universal screens with a simple yet elegant design that ensures an excellent level of protection without spoiling the lines of the motorcycle. The fitting, with either 2 or 4 fixing points, is both quick and easy thanks to the stainless steel bars with clamps that are adjustable to the brackets. The models available meet the needs of even the most demanding of motorcyclists.

UNIVERSAL SCREENS

140A Universal transparent screen35 x 41 cm (H x W)

140S Universal smoked screen35 x 41 cm (H x W)

100ALGrey anodized aluminium universal screen Race Cafe, for naked motorcycles20,5 x 26,5 cm (H x W)

100ALBBlack anodized aluminium universal screen Race Cafe, for naked motorcycles20,5 x 26,5 cm (H x W)

A800NSmoked universal screen with finished fiberglass fairingto be combined with the specific fitting kit

To mount this screen, it is necessary to combine it with the appropriate fitting kit (AL_ _ _A), specific to individual motorcycles.

A universal screen for naked motorcycles with a classic / modern style that perfectly reproduces the “café racer” look for which it was specifically designed. To embrace this philosophy, the screen has been made entirely of aluminium that has been finely brushed and then anodized and with a thickness of 2mm to withstand weathering. Essential, lightweight and technical there are no plastic components and it features either a gold or silver anodized aluminium riveted GIVI label, depending on the colour selected.

To mount this screen, it is necessary to combine it with the appropriate fitting kit (AL_ _ _A) specific to individual motorcycles.

To mount this screen, it is necessary to combine it with the appropriate fitting kit (A_ _ _A) specific to individual motorcycles.

93EXPLORE. ENJOY.

AIRST

ARS &

SPOI

LERS

A660

Universal screen with 2 point handlebar, smoked42,5 x 42 cm (H x W)complete with specific fitting kit D40

A601

Universal screen with 2 point handlebar, bronzè36,9 x 42,5 cm (H x W)complete with specific fitting kit

A603

Universal screen with 2 point handlebar, smoked37,7 x 44 cm (H x W)complete with specific fitting kit

A604

Universal screen with 2 point handlebar, smoked37,9 x 44,5 cm (H x W)complete with specific fitting kit

A34+D45

Universal screen with 4 point handlebar, smoked49 x 50 cm (H x W)

A31+D45

Universal screen with 4 point handlebar, smoked50 x 61,5 cm (H x W)

AF49

Universal sliding wind-screen, with 4 point handlebar. Maximum height 53 cm (12 cm of extension) width 52 cmcomplete with specific fitting kit D45 / to be mounted instead of the original screen

Z1997R Replacement sliding screen for Airflow

Z1963R Airflow guide latch spare parts

D40 Fitting kit for universal screen

Z1694R Internal and external brackets for D40

Z278Universal adapter to fit a 2/4-fixing-points screen on motorcycle equipped with non-tubular handlebars


AIRSTARS & SPOILERS

COLLECTIONThe universal GIVI cockpits represent an excellent example of the great attention that GIVI draws to the stylish design and to the quality level of its products.Each version is characterised by its unique style and by the capacity to perfectly adapt to the line of the front chassis. A GIVI cockpit can be light and less intrusive or can individualise the distinguishing characteristics of a sportsbike.Each version is made with a painted lower section in specific colours, fitted to a plexiglass screen. The functionality of these items is guaranteed by the use of universal fitting kits that make fitting extremely quick and easy.

NAKED WITH UNIVERSAL FITTING KIT

A200Universal screen, smoked29,5 x 34 cmcomplete with universal fitting kit

A210Universal screen, smoked36,5 x 35 cmcomplete wiith universal fitting kit

240A+A240A

Specific screen, smoked33 x 36,5 cm

UNIVERSAL AIRSTARS FOR CUSTOM

A35N+AS100A2

Universal screen, high and shaded bottom version54,9 x 46,8 cm (H x W)(Braket from mm 36 to mm 45)

A23+AS100A2

Universal screen, low and transparent version38,8 x 41 cm (H x W)(Braket from mm 36 to mm 45)

95EXPLORE. ENJOY.

AIRST

ARS &

SPOI

LERS

EXTENSION FOR HAND PROTECTORS

EH5108

BMW F 800 GS Adventure (13 > 18) / F 850 GS (18) / S 1000 XR (15 > 18) / R1200GS (13 > 18) / R 1200 GS Adventure (14 > 18) / R 1250 GS (19)Extension in smoked plexiglass for original hand protectors

EH1110

Honda Crosstourer 1200 / Crosstourer 1200 DCT (12 > 18)Extension in smoked plexiglass for original hand protectors

EH2139Yamaha Tracer 900 (18)Extension in smoked plexiglass for original hand protectors

HAND PROTECTORS

HP5129BMW F750GS (18) / R1200R (15 > 18)Specific hand protectors in ABS

HP1111

Honda NC700 X (12 > 13) / NC750 X (14 > 18) / NC750 S (14 > 18) / NC750 X DCT (14 > 15)Specific hand protectors in ABS

HP1144

Honda CRF1000L Africa Twin (16 > 18) / CRF1000L Africa Twin Adventure Sports (18) / X-ADV 750 (17 > 18)Specific hand protectors in ABS

HP4121

Kawasaki Versys-X 300 (17 > 18) / Z 900 (17) / Versys 1000 (15 > 17) / BMW G310R (17)Specific hand protectors in ABS

HP3105

Suzuki DL 650 V-Strom L2-L3-L4-L5-L6 (11 > 16) / DL 1000 V-Strom (14 > 16) / Suzuki DL1000 V-Strom (17 > 18)Specific hand protectors in ABS

HP2115

Yamaha XSR700 (16 > 18) / MT-07 (14 > 18) / MT-09 (13 > 18)Specific hand protectors in ABS

96



ENGINE GUARDSConceived with the aim to provide lateral protection of the engine, not only on trail motorcycles, but also naked and custom motorcycles as well as unfaired and semi-faired models. Should a motorcycle fall whilst located on its stand and it is equipped with an engine guard, the damage sustained by the engine would be greatly reduced. The wide range of engine guards developed and produced by GIVI includes specific solutions for a wide variety of motorcycle models. For custom motorcycles, engine guards are available in a chromed version.The characteristics of the materials used offer excellent performance, guaran-teed by GIVI expertise

Specifically designed based on individual motorcycle models, the oil carter protector makes the image of the maxi-Enduro even more “off road”. It protects the oil carter from impact resulting from rocks, bumps and holes whilst “off road” and also on less challenging roads.

OIL CARTER PROTECTORS

97EXPLORE. ENJOY.

MECH

ANIC

AL

PART

PROT

ECTIO

N

ENGINE GUARDSThe wide range of engine guards developed and produced by GIVI includes specific solutions for a wide variety of motorcycle models. For custom motorcycles, engine guards are available in a chromed version. The characteristics of the materials used offer excellent performance, guaranteed by GIVI expertise.

Material: steel or stainless steel. Finished in matt black or stainless steel depending on the different motorcycle models

PLEASE CHECK THE “SPECIFIC EQUIPMENT FOR BIKES AND SCOOTERS” TO FIND THE SPECIFIC ACCESSORIES FOR YOUR BIKE

OIL CARTER PROTECTORSSpecifically designed based on individual motorcycle models, the oil carter protector makes the image of the maxi-Enduro even more “off road”. It protects the oil carter from impact resulting from rocks, bumps and holes whilst “off road” and also on less challenging roads.

Material: aluminium


SPECIFIC RADIATOR GUARDSpecific radiator guard.

Material: Stainless steel black painted


98 Prezzi IVA inclusa s = Disponibile fino ad esaurimento delle scorte


BACKRESTSGIVI aims to not only satisfy the needs of the rider, but also those of the passenger. We produce a wide range of backrests, made from foam polyurethane, which helps to create a more comfortable ride for those who sit over the “rear wheel”. The mounting phase is totally free or can be combined with a top case, depending on the vehicle. Holder material: metal. Backrest material: Polyurethane foam.


MUDGUARD/CHAIN-COVERSpecific ABS mudguard, black colour

Material: ABS


STAND EXTENSIONSThe purpose of the range of GIVI Base Extensions is to extend the surface area of the side stand, reducing the risk of a motorbike falling when it is parked on uneven surfaces such as; mud, sand, grass or asphalt during extremely high temperatures. Produced in anodized, milled and satinised aluminium with the high support made of satinised 316L stainless steel and designed with a hard technical aspect, the stand extension integrates perfectly with your motorbike.


99EXPLORE. ENJOY.

MECH

ANIC

AL

PART

PROT

ECTIO

NSP

ECIFI

C EQU

IPME

NT FO

R BI

KES A

ND SC

OOTE

RS

SPECIFIC FITTING KITS FOR HARD BAGS

SPECIFIC HOLDERS FOR SOFT BAGS

SPECIFIC SCREENS

SPECIFIC PROTECTORS FOR MECHANICAL PARTS

SPECIFIC ACCESSORIES

FITS TOP CASE

FITS SIDE CASES

FITS “TANKLOCK” TANK BAG

FITS SADDLE BAGS

SPECIFIC SCREENS

PAIR OF PROTECTIVE HANDLE-BAR GLOVES FOR MOTORCYCLES AND SCOOTERS

EXTENSION IN PLEXIGLASS FOR ORIGINAL HAND PROTECTORS

SPECIFIC ENGINE GUARDS

SPECIFIC OIL CARTER PROTECTOR

SPECIFIC RADIATOR GUARDS

BACKRESTS

MUDGUARD / SPECIFIC ABS CHAIN-COVER

EXTENSION STAND

KIT TO MOUNT SUPPORTS FOR MOBILE DEVICES

SPECIFIC EQUIPMENT FOR BIKES AND SCOOTERSDiscover the specific equipment for your bikelisted in order of make, model and engine size

DESCRIPTION


APRILIA - BENELLIBMW

APRILIAAPRILIA SCARABEO 50 STREET (09 > 13)

SR6705 Specific rear rack for MONOLOCK® top-caseto be combined with the plate already included in the MONOLOCK® top-case

153A Specific screen, transparent 56 x 66 cm (H x W)to be combined with the specific A6704A fitting kit

A6704A Specific fitting kit for 152A-153A

APRILIA SCARABEO 50-100 (09 > 13)153A Specific screen, transparent 56 x 66 cm (H x W)

to be combined with the specific A6704A fitting kit

A6704A Specific fitting kit for 152A-153A

A MONOLOCK® TOP-CASE CAN BE FITTED USING THE UNIVERSAL PLATE INCLUDED

APRILIA SCARABEO 50 (14 > 18)SR6705 Specific rear rack for MONOLOCK® top-case

to be combined with the plate already included in the MONOLOCK® top-case

6704A Specific screeen, transparent 56 x 66 cm (H x W)to be combined with the specific A6704A fitting kit

A6704A Specific fitting kit for 6704A

APRILIA SPORTCITY ONE 50-125 (08 > 13)134A Specific screen, transparent 66 x 67 cm (H x W)

only available if article A151A is already fitted

136A Specific screen, transparent 74 x 67 cm (H x W)only available if article A151A is already fitted

APRILIA SR 50 DITECH (97 > 05)SR78 Specific rear rack for MONOLOCK® top-case


APRILIA ATLANTIC 125-200-250-300 (03 > 13)D242ST Specific screen, transparent 84 x 70 cm (H x W)

to be mounted instead of the original screen / 19 cm higher than the original

APRILIA HABANA 125 (00 > 09)SR74 Specific rear rack for MONOLOCK® or MONOKEY® top-case

to be combined with the E251 MONOKEY® plate (sold separately), or with the plate already included in the MONOLOCK® top-case


APRILIA SCARABEO 125-200 (07 > 06/11)154A Specific screen, transparent 53 x 70 cm (H x W)



APRILIA SCARABEO 125-200 (07/11 > 16)SR6701 s Specific rear rack for MONOLOCK® top-case

maximum load allowed 3 kg / to be combined with the plate already included in the MONOLOCK® top-case



APRILIA SPORTCITY 125-200-250 (04 > 08)105A Specific screen, transparent 66 x 67 cm (H x W)

for '04 only available if article A128A is already fitted / to be combined with the specific A129A fitting kit from '05

128A Specific screen, transparent 74 x 67 cm (H x W)for '04 only available if article A128A is already fitted / 8 cm higher than 105A / to be combined with the specific A129A fitting kit from '05

A129A Specific fitting kit for 128A and 105Acompatible from '05

APRILIA SPORTCITY CUBE 125-200-300 (08 > 13)134A Specific screen, transparent 66 x 67 cm (H x W)



DESCRIPTION

101101EXPLORE. ENJOY.

APRI

LIA -

BENE

LLI

BMW

APRILIA SCARABEO 250-300 (07 > 16)

E730Specific rear rack for MONOLOCK® top-casemaximum load allowed 3 kg / to be combined with the plate already included in the MONOLOCK® top-case / it is necessary to puncture the housing behind the saddle in arranged sections

130A s Specific screen, transparent 50 x 72 cm (H x W)to be combined with the specific A148A fitting kit

A148A s Specific fitting kit for 130A

APRILIA ATLANTIC 400-500 SPRINT (05 > 12)D242ST Specific screen, transparent 84 x 70 cm (H x W)


APRILIA SCARABEO 400-500 (06 > 12)

E730Specific rear rack for MONOLOCK® top-casemaximum load allowed 3 kg / to be combined with the plate already included in the MONOLOCK® top-case / it is necessary to puncture the housing behind the saddle in arranged sections

130A s Specific screen, transparent 50 x 72 cm (H x W)to be combined with the specific A148A fitting kit

APRILIA ATLANTIC 500 (02 > 06)D240ST Specific screen, transparent 65 x 69 cm (H x W)


APRILIA PEGASO 650 CUBE (97 > 00)D237S Specific screen, smoked 43,7 x 32,5 cm ( h x l)

to be mounted instead of the original screen

APRILIA PEGASO 650 IE (01 > 04)D237S Specific screen, smoked 43,7 x 32,5 cm ( h x l)


APRILIA PEGASO 650 STRADA / TRAIL (05 > 11)SR79 Specific rear rack for MONOKEY® top-case

MONOKEY® plate included / maximum load allowed 6 Kg

APRILIA SHIVER 750 / SHIVER GT 750 (07 > 12) / ABS (09 > 12)BF02 Specific flange for fitting any of the TANKLOCK, TanklockED bags

01SKITSpecific kit to mount the S900A Smart Bar or the S901A Smart MountThe S901A is compatible with the supports SGZ39SM (for Garmin Zumo 345LM / 390LM/395LM/590LM/595LM) and STTR40SM (for Tom Tom Rider 40/400/410/42/420/450/500/550)

APRILIA SHIVER 750 / ABS (10 > 16)

6702FZSpecific rear rack for MONOKEY® or MONOLOCK® top-caseto be combined with the MONOKEY® M5, M7 plates, or with the MONOLOCK® M5M or M6M plates, or with the aluminium bag holder EX2M / a handle bar for the passenger is included, the original grab rails must be removed

BF02 Specific flange for fitting any of the TANKLOCK, TanklockED bags

TE6702 Specific holder for Easylock side bags, or soft side bags


APRILIA DORSODURO 750 / DORSODURO 1200 (08 > 16)SR6700M Specific rear rack for MONOLOCK® top-case

MONOLOCK® plate included / it is necessary puncture the housing in arranged sections


01SKITSpecific kit to mount the S900A Smart Bar or the S901A Smart Mountalso for ABS versionThe S901A is compatible with the supports SGZ39SM (for Garmin Zumo 345LM / 390LM/395LM/590LM/595LM) and STTR40SM (for Tom Tom Rider 40/400/410/42/420/450/500/550)

APRILIA MANA 850 / MANA 850 GT (08 > 16)

732FZSpecific rear rack for MONOKEY® or MONOLOCK® top-caseto be combined with the MONOKEY® M5, M7, M8A, M8B, M9A or M9B plates, or with the MONOLOCK® M5M or M6M plates, or with the aluminium bag holder EX2M / if combined with M8A, M8B, M9A, M9B it does not allow the assembly of the stop light kit or the remote control device on the top-case / you must remove the grab handles / compatible with the original side-case holder


APRILIA SRV 850 (12 > 16)SR6708 Specific rear chromed rack for MONOLOCK® or MONOKEY® top-case

to be combined with the M5 MONOKEY® plate, or with the M5M or M6M MONOLOCK® plate, or with the aluminium bag holder EX2M

D6703ST Specific screen, transparent. 78 x 62 cm (H x W)to be mounted instead of the original screen

DESCRIPTION



APRILIA ETV 1000 CAPONORD (01 > 10)BF02 Specific flange for fitting any of the TANKLOCK, TanklockED bags

D239ST Specific screen, transparent 64 x 65,5 cm (H x W)compatible until year 2003 / to be mounted instead of the original screen

APRILIA TUONO V4 R (11 > 14)


APRILIA CAPONORD 1200 (13 > 17)SRA6706 Specific rear rack in aluminium for MONOKEY® top-case

maximum load allowed 6kg / it does not allow the assembly of the stop light kit or the remote control device on the top-case

D6706ST Specific screen, transparent 58 x 45 cm (H x W)to be mounted instead of the original screen / 10 cm higher than the original

ES6706 Specific support in aluminium and stainless steel to widen the surface support area of the original side stand


BENELLIBENELLI BN302 (15 > 18)

SR8702 Specific rear rack for MONOLOCK® top-caseto be combined with the plate already included in the MONOLOCK® top-case / it is necessary to remove the original grab handle

PL8702 s Specific pannier holder for MONOKEY® side-casescan only be used to mount cases MONOKEY® E22, DLM30A or DLM30B / it can be mounted only with the specific rear rack SR8702

BF02 Specific flange for fitting any of the TANKLOCK, TanklockED bagscompatible with '15

BF05 Specific flange for fitting any of the TANKLOCK, TanklockED bagscompatible from '16

247A Universal screen, smoked 29 x 28,5 cm (H x W)to be combined with the specific A8702A fitting kit

247N Specific screen, black 29 x 28,5 cm (H x W)to be combined with the specific A8702A fitting kit

A8702A Specific fitting kit for 247A and 247N


BENELLI LEONCINO 500 (17 > 18)SR8704

Specific rear rack, black, for MONOLOCK® or MONOKEY® top-caseto be combined with the E251 MONOKEY® plate (sold separately), or with the plate already included in the MONOLOCK® top-case / maximum load allowed 6 kg

TL8704KIT Specific kit to install the S250 Tool Box on the right-hand side of the motorcycleto be combined with S250 / needs to mounted on the right-hand side of the motorcycle

TMT8704 Specific holder for left side bag MT501S (Metro-T range)

BF34 Specific flange for fitting any of the TANKLOCK bagscompatible only with XS319 and EA123 TANKLOCK bags

100AL Grey anodized aluminium universal screen Race Cafe, for naked motorcycles 20,5 x 26,5 cm (H x W)to be combined with the specific AL8704A fitting kit

100ALB Black anodized aluminium universal screen Race Cafe, for naked motorcycles 20,5 x 26,5 cm (H x W)to be combined with the specific AL8704A fitting kit

140A Universal transparent screen 35 x 41cm (H x W)to be combined with the specific AL8704A fitting kit

140S Universal smoked screen 35 x 41 cm (H x W) to be combined with the specific AL8704A fitting kit

AL8704A Specific fitting kit for 100AL, 100ALB, 140A, 140S

TN8704 Specific engine guard, gloss black25 mm diameter steel tube / we recommend fitting by a qualified mechanic

BENELLI TRK502 (17 > 18)E251 Universal MONOKEY® plate including fitting kit to fit a top-case onto scooters or bikes with a rear rack already fitted

to be fitted to the original rack

PL8703 Specific pannier holder for MONOKEY®, RETRO FIT side-cases

TL8705KIT Specific kit to install the S250 Tool Box on PL8703to be combined with S250 and PL8703 / needs to mounted on the left-hand side of the motorcycle

DESCRIPTION


APRI

LIA -

BENE

LLI

BMW

D8703ST Specific screen, transparent 52 x 38 cm (H x W)to be mounted instead of the original screen

TN8703 Specific engine guard, black25 mm diameter steel tube / we recommend fitting by a qualified mechanic

TNH8703 Specific engine guard, black25 mm diameter steel tube / we recommend fitting by a qualified mechanic / it protects the upper part of the radiators


BENELLI TRK502 X (18) E251 Universal MONOKEY® plate including fitting kit to fit a top-case onto scooters or bikes with a rear rack already fitted





TN8703 Specific engine guard, blackit must be mounted with TN8703KIT / 25 mm diameter steel tube / we recommend fitting by a qualified mechanic

TN8703KIT Specific kit to install the TN8703

BENELLI BN600 (13 > 17)PL8701 s Specific pannier holder for MONOKEY®, RETRO FIT side-cases

it can be mounted only with the specific rear rack SR8701



BENELLI TRE 899 K / TRE 1130 K (06 > 16)BF02 Specific flange for fitting any of the TANKLOCK, TanklockED bags

BMWBMW G 310 R (17 > 18)

SR5125Specific rear rack for MONOLOCK® or MONOKEY® top-caseto be combined with the M5, M7, M8A, M8B, M9A or M9B MONOKEY® plate, or with the M5M or M6M MONOLOCK® plate, or with the aluminium bag holder EX2M, or with the plate already included in the MONOLOCK® top-case / if combined with M8A, M8B, M9A, M9B it does not allow the assembly of the stop light kit or the remote control device on the case / maximum load allowed 6 kg



A5125 Specific screen, smoked 28 x 36,5 cm (H x W) complete with specific fitting kit

A5125BL Specific "ICE" screen 28 x 36,5 cm (H x W)complete with specific fitting kit / when illuminated by vehicle headlights in low light conditions, the edge glows blue in colour

HP4103 Specific hand protectors in ABS


BMW G 310 GS (17 > 18)

SR5126Specific rear rack for MONOLOCK® or MONOKEY® top-caseto be combined with the M5, M8A, M8B, M9A or M9B MONOKEY® plate, or with the M5M or M6M MONOLOCK® plate, or with the aluminium bag holder EX2M / if combined with M8A, M8B, M9A, M9B it does not allow the assembly of the stop light kit or the remote control device on the top-case






PR5126 Stainless steel specific radiator guard black painted

DESCRIPTION



RM01 Universal spray guardmust be paired with the specific mounting kit (RM5126KIT)


RM5126KIT Specific kit for spray guard RM01, RM02

MG5126 Specific ABS mudguard, black colour

LS5126 Specific fitting kit to mount S310, S321 or S322 spotlights where specific engine guard is not present



FB5126 Fairing upper bracket to be mounted behind the windshield to install S902A, S920M, S920L and GPS-Smartphone holderFor S902A, S920M, S920L, S952B, S953B, S954B, S955B, S956B, S957B


BMW C 400 X (19)

SR5130Specific rear rack for MONOLOCK® or MONOKEY® top-caseto be combined with the M5, M7, M8A, M8B, M9A or M9B MONOKEY® plate, or with the M5M or M6M MONOLOCK® plate, or with the aluminium bag holder EX2M / if combined with M8A, M8B, M9A, M9B it does not allow the assembly of the stop light kit or the remote control device on the top-case / maximum load allowed 6 kg

BMW C 600 SPORT (12 > 15)SR5105 Specific rear rack for MONOKEY® top-case

MONOKEY® plate included

SR5105M Specific rear rack for MONOLOCK® top-caseMONOLOCK® plate included

D5105ST Transparent screen composed of three pieces - main screen-blade and two hand protectors. 73,5 x 73 cm (H x W)to be mounted instead of the original screen / 12 cm higher than the original

BMW C 650 GT (12 > 18)SRA5106 Specific rear rack in aluminium for MONOKEY® top-case


D5106ST Transparent screen composed of three pieces - main screen-blade and two hand protectors. 81 x 58 cm (H x W)to be mounted instead of the original screen / 13 cm higher than the original

BMW C 650 SPORT (16 > 18)


D5105ST Transparent screen composed of three pieces - main screen-blade and two hand protectors. 73,5 x 73 cm (H x W)to be mounted instead of the original screen / 12 cm higher than the original

D5121ST Specific screen, transparent, 71 x 53 cm (H x W)to be mounted instead of the original screen

TB5121 Specific backrestit cannot be mounted if rack and case are installed

BMW F 650 (94 > 96)D230S Specific screen, smoked 45,7 x 42,3 cm (H x W)


BMW F 650 CS SCARVER (02 > 06)SR682M s Specific rear rack for MONOLOCK® top-case

MONOLOCK® plate included / maximum load allowed 8 Kg

BMW F 650 GS (00 > 03)

639FSpecific rear rack for MONOKEY® or MONOLOCK® top-caseit is not compatible with the original side-cases holder / To be combined with the plate MONOKEY® M3, or with the plate MONOLOCK® MM / compatible from august '00


D234S Specific screen, smoked 41,1 x 34 cm (H x W)to be mounted instead of the original screen

BMW F 650 GS (04 > 07)SR685 Specific rear rack for MONOKEY® top-case

it does not allow the assembly of the stop light kit or the remote control device on the top-case


D331ST Specific screen, transparent 39,5 x 44 cm (H x W)to be mounted instead of the original screen / 15,5 cm higher than the original / cannot be mounted with original hand protectors

DESCRIPTION


APRI

LIA -

BENE

LLI

BMW

BMW F 650 GS / F 800 GS (08 > 17)

SRA5103Specific rear rack in aluminium for MONOKEY® top-casemaximum load allowed 6kg / it does not allow the assembly of the stop light kit or the remote control device on the top-case / cannot be mounted with article PL690

SR5107 Specific rear rack for MONOKEY® top-caseMONOKEY® plate included / it is not compatible with the PL690

E194 Specific rear rack for MONOKEY® top-caseMONOKEY® plate included / compatible with the rear plate / only for F 650 GS / F 800 GS (08-11)

E194M Specific rear plateMONOLOCK® plate included / only for F 650 GS / F 800 GS (08-11)

PL690 Specific pannier holder for MONOKEY®, RETRO FIT side-casesit can be mounted only with the specific plate E194 or E194M / only for year '08-'11

PLR5103 Specific rapid release side-case holder for MONOKEY®, RETRO FIT cases

PL5103CAM Specific pannier holder for Trekker Outback MONOKEY® CAM-SIDE18 mm diameter

S250KIT * Universal kit to install the S250 Tool Boxneeds to be mounted on the right-hand side of the PLR5103 or of the PL5103CAM / To be combined with S250 and the specific pannier holder


333DT Specific screen, transparent 44 x 46 cm (H x W)to be combined with the specific D333KIT fitting kit / 26 cm higher than the original F650GS - 22 cm higher than the original F800GS

D333KIT Specific fitting kit for 333DT

TN690 Specific engine guard25 mm diameter steel tube / we recommend fitting by a qualified mechanic

TN5103 Specific engine guardcompatible from '13 / only for BMW F800GS / 25 mm diameter steel tube / we recommend fitting by a qualified mechanic

RP5103 Oil carter protector in Aluminium


HP5103 Specific hand protectors in ABScompatible from '13 / only for BMW F800GS

ES5107 Specific support in aluminium and stainless steel to widen the surface support area of the original side standonly for BMW F650GS from '13

ES5103 Specific support in aluminium and stainless steel to widen the surface support area of the original side standonly for BMW F800 GS


* IN THE EVENT THAT THE S250 TOOL BOX AND S250KIT ARE MOUNTED ON A SIDE-CASE HOLDER AND COMPATIBILITY HAS NOT BEEN VERIFIED BY GIVI, THEN BEFORE HITTING THE ROAD, IT IS ESSENTIAL TO CHECK THAT NOTHING (INCLUDING THE TOOL BOX) INTERFERES WITH THE FULL RANGE OF MOVEMENTS OF THE SWINGARM.

BMW F 650 GS DAKAR (00 > 03)639F Specific rear rack for MONOKEY® or MONOLOCK® top-case

it is not compatible with the original side-case holder / To be combined with the plate MONOKEY® M3, or with the plate MONOLOCK® MM


BMW F 650 ST (97 > 99)PL185 Specific pannier holder for MONOKEY®, RETRO FIT side-cases

D232S Specific screen, smoked 43 x 41,5 cm (H x W)to be mounted instead of the original screen

BMW G 650 GS (11 > 17)SR685 Specific rear rack for MONOKEY® top-case

it does not allow the assembly of the stop light kit or the remote control device on the top-case







ES5101 s Specific support in aluminium and stainless steel to widen the surface support area of the original side stand


DESCRIPTION



BMW F 700 GS (13 > 17)SRA5103 Specific rear rack in aluminium for MONOKEY® top-case


SR5107 Specific rear rack for MONOKEY® top-caseMONOKEY® plate included



S250KIT * Universal kit to install the S250 Tool Boxneeds to be mounted on the right-hand side of the PL5103CAM / To be combined with S250 and the specific pannier holder


5107DT Specific screen, transparent 50 x 49 cm (H x W)to be combined with the specific D5107KIT fitting kit


AF5107 Specific sliding wind-screen transparent, Airflow. Maximum height 53 cm (12 cm of extension) width 51 cmcomplete with specific fitting kit / to be mounted instead of the original screen


TN5103 Specific engine guardwe recommend fitting by a qualified mechanic



HP5103 BMW F700GS (13 > 16) / BMW F800GS (13 > 16)Specific hand protectors in ABS




BMW K75 750E180 Specific rear rack for MONOKEY® top-case

MONOKEY® plate included / it is necessary to puncture the housing behind the saddle

E181 s Specific rear rack for MONOKEY® top-caseMONOKEY® plate included / it is necessary to puncture the housing behind the saddle

BMW F 750 GS (18)

SRA5127Specific rear rack in aluminium for MONOKEY® top-casemaximum load allowed 6kg / it does not allow the assembly of the stop light kit or the remote control device on the top-case / it can only be mounted to the original rack in aluminium

SR5129Specific rear rack for MONOLOCK® or MONOKEY® top-caseto be combined with the M5, M8A, M8B, M9A or M9B MONOKEY® plate, or with the M5M or M6M MONOLOCK® plate, or with the aluminium bag holder EX2M / if combined with M8A, M8B, M9A, M9B it does not allow the assembly of the stop light kit or the remote control device on the top-case / it can only be mounted to the original plastic rack


TL5127PLRKIT Specific kit to install the S250 Tool Box on PLR5127to be combined with S250 and PLR5127 / needs to mounted on the left-hand side of the motorcycle


TL5127CAMKIT Specific kit to install the S250 Tool Box on PL5127CAMto be combined with S250 and PL5127CAM / needs to mounted on the left-hand side of the motorcycle


D5127S Specific screen, smoked 44 x 47 cm (H x W)to be combined with the specific D5129KIT fitting kit / 17 cm higher than the original

D5127ST Specific screen, transparent 54,5 x 49 cm (H x W)to be combined with the specific D5129KIT fitting kit / 27 cm higher than the original

AF5127 Specific sliding wind-screen transparent, Airflow. Maximum height 59 cm (12 cm of extension), width 49 cmto be combined with the specific D5129KIT fitting kit / to be mounted instead of the original screen

D5129KIT Specific fitting kit for D5127S, D5127ST, AF5127


TN5127OX Specific engine guard, stainless steel25 mm diameter steel tube / we recommend fitting by a qualified mechanic


DESCRIPTION


APRI

LIA -

BENE

LLI

BMW

RP5129KIT Specific kit to install the RP5129


HP5129 Specific hand protectors in ABSto be mounted instead of the original hand protectors




03VKIT Specific kit to mount the Smart Mount RC S903Aneeds to be mounted on the brake fluid reservoir cover, on the right-hand side

BMW F 800 GS ADVENTURE (13 > 18)SRA5103 Specific rear rack in aluminium for MONOKEY® top-case

maximum load allowed 6kg / it does not allow the assembly of the stop light kit or the remote control device on the case



AF5110 Specific sliding wind-screen transparent, Airflow. Maximum height 54 cm (12 cm of extension), width 56 cmto be mounted instead of the original screen


TNH5123OX Specific engine guard, stainless steel25 mm diameter steel tube / we recommend fitting by a qualified mechanic / it protects the upper part of the radiators


EH5108 Extension in smoked plexiglass for original hand protectors



BMW F 800 GT (13 > 18)SR5109 Specific rear rack for MONOKEY® top-case


PLR5118 Specific rapid release side-case holder for MONOKEY® casesIt can only be mounted to the original rack / not compatible with the side-cases in aluminium DLM36 Trekker Dolomiti



D5109ST Specific screen, transparent 62 x 58 cm (H x W)to be mounted instead of the original screen / 17,5 cm higher than the original

D5109S Specific screen, smoked 58 x 40 cm (H x W)to be mounted instead of the original screen / 13,5 cm higher than the original



BMW F 800 R (09 > 14)

SRA691Specific rear rack in aluminium for MONOKEY® top-casecannot be mounted with the original side-case holder / maximum load allowed 6kg / it does not allow the assembly of the stop light kit or the remote control device on the case

PLR5118Specific rapid release side-case holder for MONOKEY® casesto be combined with the kit PLR5118KIT when the original plastic grab handles are mounted / It can only be mounted to the original rack / not compatible with the side-cases in aluminium DLM36 Trekker Dolomiti

PLR5118KIT Specific kit to mount the PLR5118 on BMW F800R with the original plastic grab handles





DESCRIPTION



BMW F 800 R (15 > 18)

SRA691Specific rear rack in aluminium for MONOKEY® top-casecannot be mounted with the original side-case holder / maximum load allowed 6kg / it does not allow the assembly of the stop light kit or the remote control device on the case

SR5109 Specific rear rack for MONOKEY® top-caseit can only be mounted to the original BMW rack, which is available as an optional extra / MONOKEY® plate included

PLR5118Specific rapid release side-case holder for MONOKEY® casesto be combined with the kit PLR5118KIT when the original plastic grab handles are mounted / It can only be mounted to the original rack / not compatible with the side-cases in aluminium DLM36 Trekker Dolomiti

PLR5118KIT Specific kit to mount the PLR5118 on BMW F800R with the original plastic grab handles



A5118 Specific screen, smoked 28,5 x 36 cm (H x W)to be mounted instead of the original screen / complete with fitting kit




BMW F 800 S (06 > 16)D332ST Specific screen, transparent 45 x 35 cm (H x W)

17 cm higher than the original F800S / to be mounted instead of the original screen

BMW F 800 ST (06 > 16)SR5109 Specific rear rack for MONOKEY® top-case


D332ST Specific screen, transparent 45 x 35 cm (H x W)7 cm higher than the original F800ST / to be mounted instead of the original screen

BMW R 850 GS (94 > 01)PL189 Specific pannier holder for MONOKEY®, RETRO FIT side-cases

BMW R 850 R (95 > 02)635F Specific rear rack for MONOKEY® or MONOLOCK® top-case

compatible with the original side-case holder / To be combined with the plate MONOKEY® M3, or with the plate MONOLOCK® MM

BMW F 850 GS (18)

SRA5127Specific rear rack in aluminium for MONOKEY® top-casemaximum load allowed 6kg / it does not allow the assembly of the stop light kit or the remote control device on the top-case / it can only be mounted to the original rack in aluminium

SR5129Specific rear rack for MONOLOCK® or MONOKEY® top-caseto be combined with the M5, M8A, M8B, M9A or M9B MONOKEY® plate, or with the M5M or M6M MONOLOCK® plate, or with the aluminium bag holder EX2M / if combined with M8A, M8B, M9A, M9B it does not allow the assembly of the stop light kit or the remote control device on the top-case / it can only be mounted to the original plastic rack






D5127S Specific screen, smoked 44 x 47 cm (H x W)to be mounted instead of the original screen / 17 cm higher than the original

D5127ST Specific screen, transparent 54,5 x 49 cm (H x W)to be mounted instead of the original screen / 27 cm higher than the original

AF5127 Specific sliding wind-screen transparent, Airflow. Maximum height 59 cm (12 cm of extension), width 49 cmto be mounted instead of the original screen



RP5127 s Oil carter protector in Aluminium


DESCRIPTION


APRI

LIA -

BENE

LLI

BMW







BMW S 1000 RR (12 > 18)BF22 Specific flange for fitting any of the TANKLOCK, TanklockED bags

BMW S 1000 R (14 > 18)BF22 Specific flange for fitting any of the TANKLOCK, TanklockED bags

PR5119 Specific protection for water and oil radiators, made from black painted stainless steel

BMW S 1000 XR (15 > 18)SRA5119 Specific rear rack in aluminium for MONOKEY® top-case




PLXR5119 Specific rapid release side-case holder for V35, V37 MONOKEY® SIDE cases


D5119S Specific screen, smoked 50 x 43,5 cm (H x W)to be mounted instead of the original screen / 13 cm higher than the original

D5119ST Specific screen, transparent, 50 x 43,5 cm (H x W)to be mounted instead of the original screen / 13 cm higher than the original








BMW K 100 1000 (90)E180 Specific rear rack for MONOKEY® top-case



BMW K 1100 RSE180 Specific rear rack for MONOKEY® top-case



BMW R 1100 GS (94 > 99)SR694 Specific rear rack for MONOKEY® top-case



DESCRIPTION



BMW R 1100 R (95 > 01)635F Specific rear rack for MONOKEY® or MONOLOCK® top-case


BMW R 1100 RS (94 > 98)E183 Specific rear rack for MONOKEY® top-case


BMW R 1100 RT (96 > 00)E183 Specific rear rack for MONOKEY® top-case


BMW R 1100 S (98 > 06)681F Specific rear rack for MONOKEY® or MONOLOCK® top-case


BMW R 1150 GS (00 > 03)SR694 Specific rear rack for MONOKEY® top-case



D233S Specific screen, transparent 48,5 x 36,6 cm (H x W)to be mounted instead of the original screen

BMW R 1150 R (01 > 06)

SR683Specific rear rack for MONOKEY® top-caseMONOKEY® plate included / to be mounted only with the original side-case holder / maximum load allowed 6 Kg / it is not compatible with R850R Comfort


BMW R 1150 RT (01)E183 Specific rear rack for MONOKEY® top-case




to be fitted to the original rack / MONOKEY® plate included



BMW K 1200 GT (03 > 04)680F Specific rear rack for MONOKEY® or MONOLOCK® top-case


BMW K 1200 RS (00 > 04)680F Specific rear rack for MONOKEY® or MONOLOCK® top-case



BMW K 1200 R (05 > 08) / K 1300 R (09 > 16)

SRA690Specific rear rack in aluminium for MONOKEY® top-caseit can be fitted with the original side-case holder / maximum load allowed 6kg / it does not allow the assembly of the stop light kit or the remote control device on the top-case

PLXR691 Specific rapid release side-case holder for V35, V37 MONOKEY® SIDE casesit is necessary to move the indicators from their original position


BMW K 1200 S (05 > 08) / K 1300 S (09 > 16)PLR692 s Specific rapid release side-case holder for MONOKEY®, RETRO FIT cases


BMW K 1200 GT / K 1300 GT (06 > 10)

SRA693Specific rear rack in aluminium for MONOKEY® top-caseit can be fitted with the original side-case / maximum load allowed 6kg / it does not allow the assembly of the stop light kit or the remote control device on the top-case


DESCRIPTION


APRI

LIA -

BENE

LLI

BMW

BMW R 1200 GS ADVENTURE (06 > 13)

SRA5102Specific rear rack in aluminium for MONOKEY® top-caseit can be fitted with the original side-case holder / maximum load allowed 6kg / it does not allow the assembly of the stop light kit or the remote control device on the top-case


TL5102KITSpecific kit to install the S250 Tool Box onto the (optional) BMW original side-case holderto be combined with the S250 tool box / only for motorcycles equipped with the (optional) original BMW side-case holder / needs to mounted on the right-hand side of the motorcycle

BF22 Specific flange for fitting any of the TANKLOCK, TanklockED bagsonly for R1200GS Adventure (09 > 13)

ES5102 Specific support in aluminium and stainless steel to widen the surface support area of the original side standonly for R1200GS Adventure ('07-'13)


BMW R 1200 GS ADVENTURE (14 > 18)SRA5112 Specific rear rack in aluminium for MONOKEY® top-case


PL5108CAM Specific pannier holder for Trekker Outback MONOKEY® CAM-SIDE18 mm diameter / it is necessary to move the indicators from their original position


PLR5108 Specific rapid release side-case holder for MONOKEY® casesnot compatible with the side-cases in aluminium DLM36 Trekker Dolomiti / it is necessary to move the indicators from their original position


TL5112KITSpecific kit to install the S250 Tool Box onto the (optional) BMW original side-case holderto be combined with the S250 tool box / only for motorcycles equipped with the (optional) original BMW side-case holder / needs to mounted on the left-hand side of the motorcycle


5108DT Specific screen, transparent 55 x 44,5 cm (H x W)to be combined with the specific D5108KIT fitting kit / 17 cm higher than the original

5108DSpecific screen, smoked 43,5 x 43 cm (H x W)to be combined with the specific D5108KIT fitting kit / 5 cm higher than the original R1200GS and size equal to that of the bike R1200GS Adventure

5124DT Specific screen, transparent 53,5 x 45 cm (H x W)compatible from 2016 / to be combined with the specific D5108KIT fitting kit / 15 cm higher than the original

5124D Specific screen, smoked 43,5 x 43 cm (H x W)compatible from 2016 / to be combined with the specific D5108KIT fitting kit / 1.96 inches higher than the original

D5108KIT Strengthening kit for the 5108DT, 5108D, 5124DT, 5124D screen

D5124B Specific low sports screen smoked 35 x 45 cm (H x W)compatible from 2016 / to be mounted instead of the original screen


TNH5112OXSpecific engine guard, stainless steel25 mm diameter steel tube / we recommend fitting by a qualified mechanic / it protects the upper part of the radiators / it can be mounted only with the original engine guard



LP5112 Specific protection in steel and anodized aluminium for original spotlightsTo be mounted only with the original optional spotlights

FG5108 Specific footguards in ABS

ES5112 Specific support in aluminium and stainless steel to widen the surface support area of the original side standit is not compatible with the version of the motorcycle equipped with lowered suspension

XS5112E Pair of panniers to be mounted to the original engine guard of the BMW R1200GS Adventure (14 > 18)

XS5112R Specific tool bag, designed to be mounted under the original rear rack of the BMW R1200GS Adventure (14 > 18)Not compatible with the SRA5112 produced from 2017 due to the reinforcement installed for the rear rack


BMW R 1200 GS (04 > 12)

SRA692Specific rear rack in aluminium for MONOKEY® top-caseit can be fitted with the original side-case holder / maximum load allowed 6kg / it does not allow the assembly of the stop light kit or the remote control device on the top-case / compatible from '07 to '12

SR689 Specific rear rack for MONOKEY® top-caseMONOKEY® plate included / replaces the original rack / compatible with the original side-case holder

SR684 Specific rear rack for MONOKEY® top-caseto be fitted to the original rack / maximum load allowed 6 Kg / MONOKEY® plate included / compatible with the original side-case holder

DESCRIPTION





BF17 Specific flange for fitting any of the TANKLOCK, TanklockED bagsonly R1200GS (04 > 07)

BF22 Specific flange for fitting any of the TANKLOCK, TanklockED bagsonly R1200GS (08 > 12)

330DT Specific screen, transparent 51,5 x 56,5 cm (H x W)to be combined with the specific D330KIT fitting kit / 14,5 cm higher than the original / adjustable as the original



TN689 Specific engine guard, grey25 mm diameter steel tube / we recommend fitting by a qualified mechanic

ES684 Specific support in aluminium and stainless steel to widen the surface support area of the original side standonly R1200GS (04 > 05)

ES5102 Specific support in aluminium and stainless steel to widen the surface support area of the original side standonly R1200GS (07 > 12)


BMW R 1200 GS (13 > 18)SRA5108 Specific rear rack in aluminium for MONOKEY® top-case





PLR5108Specific rapid release side-case holder for MONOKEY® casesnot compatible with the side-cases in aluminium DLM36 Trekker Dolomiti / it is necessary to move the indicators from their original position



5108DT Specific screen, transparent 55 x 44,5 cm (H x W)compatible from 2013 to 2015 / to be combined with the specific D5108KIT fitting kit / 17 cm higher than the original

5108DSpecific screen, smoked 43,5 x 43 cm (H x W)compatible from 2013 to 2015 / to be combined with the specific D5108KIT fitting kit / 5 cm higher than the original R1200GS and size equal to that of the bike R1200GS Adventure

5124DT Specific screen, transparent 53,5 x 45 cm (H x W)compatible from 2016 / to be combined with the specific D5108KIT fitting kit / 15 cm higher than the original

5124D Specific screen, smoked 43,5 x 43 cm (H x W)compatible from 2016 / to be combined with the specific D5108KIT fitting kit / 1.96 inches higher than the original

D5108KIT Strengthening kit for the 5108DT, 5108D, 5124DT, 5124D screen

D5108B Specific low sports screen smoked 35,5 x 44 cm (H x W)compatible from 2013 to 2015 / to be mounted instead of the original screen

D5124B Specific low sports screen smoked 35 x 45 cm (H x W)compatible from 2016 / to be mounted instead of the original screen

TN5108OX Specific engine guard, stainless steelto be combined with TN5108KIT from 2016 / 25 mm diameter steel tube / we recommend fitting by a qualified mechanic

TN5108 Specific engine guardto be combined with TN5108KIT from 2016 / 25 mm diameter steel tube / we recommend fitting by a qualified mechanic

TNH5114Specific engine guard, blackcompatible from 2013 to 2016 / 25 mm diameter steel tube / we recommend fitting by a qualified mechanic / it protects the upper part of the radiators / it can be mounted with the original engine guard or with engine TN5108OX - TN5108

TNH5114OXSpecific engine guard, stainless steelcompatible from 2013 to 2016 / 25 mm diameter steel tube / we recommend fitting by a qualified mechanic / it protects the upper part of the radiators / it can be mounted with the original engine guard or with engine TN5108OX - TN5108

TNH5124 Specific engine guard, blackcompatible from 2017 / 25 mm diameter steel tube / we recommend fitting by a qualified mechanic / it protects the upper part of the radiators

TNH5124OX Specific engine guard, stainless steelcompatible from 2017 / 25 mm diameter steel tube / we recommend fitting by a qualified mechanic / it protects the upper part of the radiators

TN5108KIT Specific kit to install the engine guards TN5108 / TN5108OXcompatible from 2016 / to be combined with TN5108, TN5108OX



PH5108 Specific engine head protector in anodized aluminium

DESCRIPTION


APRI

LIA -

BENE

LLI

BMW




XS315 Tool case pockets specifically designed for BMW R1200GS (13 > 18) / R 1250 GS (19)


BMW R 1200 R (06 > 10)

688FZSpecific rear rack for MONOKEY® or MONOLOCK® top-caseto be combined with the MONOKEY® M5, M7, M8A, M8B, M9A or M9B plates, or with the MONOLOCK® M5M or M6M plates, or with the aluminium bag holder EX2M / if combined with M8A, M8B, M9A, M9B it does not allow the assembly of the stop light kit or the remote control device on the top-case / it is not compatible with the original side-case holder

147A Specific screen, transparent 49,5 x 46 cm (H x W)to be combined with the specific A147A fitting kit


BMW R 1200 R (11 > 14)SR5100M Specific rear rack for MONOLOCK® top-case

MONOLOCK® plate included





BMW R 1200 R (15 > 18)

SRA5117Specific rear rack in aluminium for MONOKEY® top-casemaximum load allowed 6kg / it does not allow the assembly of the stop light kit or the remote control device on the top-case / it can only be mounted to the original rack (optional)






TN5108 Specific engine guardto be combined with TN5108KIT / 25 mm diameter steel tube / we recommend fitting by a qualified mechanic

TN5108OX Specific engine guard, stainless steelto be combined with TN5108KIT / 25 mm diameter steel tube / we recommend fitting by a qualified mechanic

TN5108KIT Specific kit to install the engine guards TN5108 / TN5108OXto be combined with TN5108, TN5108OX






BMW R 1200 RS (15 > 18)

SRA5117Specific rear rack in aluminium for MONOKEY® top-casemaximum load allowed 6kg / it does not allow the assembly of the stop light kit or the remote control device on the top-case / it can only be mounted to the original rack (optional)



DESCRIPTION




D5120ST Specific screen, transparent, 56,5 x 47 cm (H x W)to be mounted instead of the original screen / 19,5 cm higher than the original

TN5108 Specific engine guardto be combined with TN5108KIT / 25 mm diameter steel tube / we recommend fitting by a qualified mechanic

TN5108OX Specific engine guard, stainless steelto be combined with TN5108KIT / 25 mm diameter steel tube / we recommend fitting by a qualified mechanic

TN5108KIT Specific kit to install the engine guards TN5108 / TN5108OXto be combined with TN5108, TN5108OX

RP5112 Oil carter protector in Aluminiumto be combined with RP5117KIT /






SRA5116 Specific rear rack in aluminium for MONOKEY® top-casemaximum load allowed 6kg / it does not allow the assembly of the stop light kit or the remote control device on the top-case


BMW R 1200 RT (14 > 18)SRA5113 Specific rear rack in aluminium for MONOKEY® top-case




LS5113 Specific fitting kit to mount S310, S321 or S322 spotlights


BMW R 1200 S (06)BF22 Specific flange for fitting any of the TANKLOCK, TanklockED bags

BMW R NINE T (14 > 18)BF22 Specific flange for fitting any of the TANKLOCK, TanklockED bags

only for ST602, MT505 or XS319 TANKLOCK bags

TE5115 Specific holder for Easylock side bags, or soft side bagsit is necessary to move the indicators from their original position

TMT5115 Specific holder for right side bag MT501S (Metro-T range)it is necessary to move the indicators from their original position






A800N Universal smoked screen with finished fiberglass fairingto be combined with the specific A5115A fitting kit

A5115A Specific fitting kit A800N

LS5115 Specific fitting kit to mount S310, S321 or S322 spotlights


DESCRIPTION


APRI

LIA -

BENE

LLI

BMW

BMW R 1250 GS (19) SRA5108 Specific rear rack in aluminium for MONOKEY® top-case





PLR5108 Specific rapid release side-case holder for MONOKEY® casesnot compatible with the side-cases in aluminium DLM36 Trekker Dolomiti / it is necessary to move the indicators from their original position



5124DT Specific screen, transparent 53,5 x 45 cm (H x W)to be combined with the specific D5128KIT fitting kit / 15 cm higher than the original

5124D Specific screen, smoked 43,5 x 43 cm (H x W)to be combined with the specific D5128KIT fitting kit / 5 cm higher than the original

D5128KIT Strengthening kit for the 5124DT, 5124D screen

D5124B Specific low sports screen smoked 35 x 45 cm (H x W)to be mounted instead of the original screen

TNH5124 Specific engine guard, black25 mm diameter steel tube / we recommend fitting by a qualified mechanic / it protects the upper part of the radiators

TNH5124OX Specific engine guard, stainless steel25 mm diameter steel tube / we recommend fitting by a qualified mechanic / it protects the upper part of the radiators






XS315 Tool case pockets specifically designed for BMW R1200GS (13 > 18) / R 1250 GS (19)


BMW R NINE T SCRAMBLER (16 > 18)BF22 Specific flange for fitting any of the TANKLOCK, TanklockED bags

only for ST602, MT505 or XS319 TANKLOCK bags

TMT5115 Specific holder for right side bag MT501S (Metro-T range)it is necessary to move the indicators from their original position


BMW K 1600 GT (11 > 18)SRA5116 Specific rear rack in aluminium for MONOKEY® top-case


DESCRIPTION


DUCATI - GILERA

DUCATIDUCATI SCRAMBLER 400 (16 > 18)

PL7407Specific pannier holder for MONOKEY® side-casescan only be used to mount cases MONOKEY® E22 and DLM30A / to ensure the best visibility of the rear indicators with cases mounted, the indicators need to be relocated using kit IN7407KIT

IN7407KIT Specific kit to move the indicators to ensure optimum visibility with cases fittedto be combined with PL7407

7407A Specific screen, transparent 48 x 43,5 cm (H x W) to be combined with the specific A7407A fitting kit

7407AS Specific screen, transparent with “78” serigraphy, 48 x 43,5 cm (H x W)to be combined with the specific A7407A fitting kit

A7407A Specific fitting kit for 7407A, 7407AS

TN7407 Specific engine guard, black25 mm diameter steel tube / we recommend fitting by a qualified mechanic / not compatible with the oil carter protector RP7407

DUCATI MONSTER 69503SKIT

Specific kit to mount the S900A Smart Bar or the S901A Smart MountThe S901A is compatible with the supports SGZ39SM (for Garmin Zumo 345LM / 390LM/395LM/590LM/595LM) and STTR40SM (for Tom Tom Rider 40/400/410/42/420/450/500/550)

DUCATI MONSTER 696 / 796 / 1100 (08 > 14)

780FZSpecific rear rack for MONOKEY® or MONOLOCK® top-caseto be combined with the MONOKEY® M5, M7, M8A, M8B, M9A or M9B plates, or with the MONOLOCK® M5M or M6M plates, or with the aluminium bag holder EX2M / if combined with M8A, M8B, M9A, M9B it does not allow the assembly of the stop light kit or the remote control device on the top-case / maximum load allowed 6 kg


T681 Specific holder for soft side bags

7400KIT Specific kit to install the T681 without the specific rear rack 780FZ


DUCATI MONSTER S2R / S4R / S4RS 800 / 1000 (04 > 08)BF08 Specific flange for fitting any of the TANKLOCK, TanklockED bags



DUCATI HYPERMOTARD 796 / 1100 (12 > 14)


DUCATI MULTISTRADA 620 / MULTISTRADA 1000 DS (03 > 06)SR310 Specific rear rack for MONOKEY® top-case


DUCATI SCRAMBLER ICON 800 (15 > 18)PL7407 Specific pannier holder for MONOKEY® side-cases

can only be used to mount cases MONOKEY® E22 and DLM30A / it is necessary to move the indicators from their original position

7407A Specific screen, transparent 48 x 43,5 cm (H x W) to be combined with the specific A7407A fitting kit

7407AS Specific screen, transparent with “78” serigraphy, 48 x 43,5 cm (H x W)to be combined with the specific A7407A fitting kit

A7407A Specific fitting kit for 7407A, 7407AS

TN7407 Specific engine guard, black25 mm diameter steel tube / we recommend fitting by a qualified mechanic / not compatible with the oil carter protector RP7407

RP7407 s Oil carter protector in Aluminiumnot compatible with the TN7407


DUCATI HYPERSTRADA 821 (13 > 16)SRA7403 Specific rear rack in aluminium for MONOKEY® top-case



DESCRIPTION


DUCA

TI - G

ILERA

DUCATI 848 / 1098 / 1198 (07 > 12)BF08 Specific flange for fitting any of the TANKLOCK, TanklockED bags

DUCATI STREETFIGHTER 848 / 1098 (09 > 15)247N Universal screen, black 29 x 28,5 cm (H x W)


A781A s Specific fitting kit for 247N


DUCATI ST 2 / ST 4 900 (97 > 01)675F

Specific rear rack for MONOKEY® or MONOLOCK® top-caseit is not compatible with the original side-case holder / To be combined with the plate MONOKEY® M3, or with the plate MONOLOCK® MM

DUCATI HYPERMOTARD 939 (16 > 18)TST7409 s Specific holder for pair of side bags ST604 (Sport-T range)

PR7409 s Stainless steel specific radiator guard black painted

03SKITSpecific kit to mount the S900A Smart Bar or the S901A Smart Mountalso for SP versionThe S901A is compatible with the supports SGZ39SM (for Garmin Zumo 345LM / 390LM/395LM/590LM/595LM) and STTR40SM (for Tom Tom Rider 40/400/410/42/420/450/500/550)

DUCATI HYPERSTRADA 939 (16)SRA7403 Specific rear rack in aluminium for MONOKEY® top-case


PL7403 Specific pannier holder for MONOKEY® side-casescan only be used to mount cases MONOKEY® E22, DLM30A or DLM30B

PR7409 s Stainless steel specific radiator guard black painted


DUCATI SUPERSPORT 939 (17 > 18)D7410S Specific screen, smoked


DUCATI MULTISTRADA 950 (17 > 18)PLR7406CAM Specific rapid release side-case holder for Trekker Outback MONOKEY® CAM-SIDE

to be combined with PLR7406CAMKIT / 18 mm diameter

PLR7406CAMKIT Specific kit to install the PLR7406CAM on Ducati Multistrada 950

TL1146KIT Specific kit to install the S250 Tool Box on PLR7406CAMto be combined with S250 and PLR7406CAM / needs to mounted on the left-hand side of the motorcycle



D7406S Specific screen, smokedto be mounted instead of the original screen

TN7406B Specific engine guard, black25 mm diameter steel tube / we recommend fitting by a qualified mechanic




DUCATI ST 3 1000 (04 > 08)675F

Specific rear rack for MONOKEY® or MONOLOCK® top-caseit is not compatible with the original side-case holder / To be combined with the plate MONOKEY® M3, or with the plate MONOLOCK® MM

DUCATI MONSTER 1100 EVO (11 > 12)



7400KIT Specific kit to install the TE7400 without the specific rear rack 780FZ

DESCRIPTION


DUCATI - GILERA

DUCATI 1199 PANIGALE (12 > 13)D7402S s Specific screen, smoked with logo GIVI-LCR Team 35 x 27 cm (H x W)


DUCATI DIAVEL 1200 (11 > 18)TE7405 Specific holder for Easylock side bags, or soft side bags

By mounting the side bags, the indicators are covered laterally and therefore the 80° side lighting cannot be guaranteed

DUCATI MULTISTRADA 1200 (10 > 12)SR312 Specific rear rack for MONOKEY® top-case

MONOKEY® plate included / compatible with the original side-case holder




TN7401 Specific engine guardonly for year '11-'12 / we recommend fitting by a qualified mechanic


DUCATI MULTISTRADA 1200 (13 > 14)SRA7401 Specific rear rack in aluminium for MONOKEY® top-case


SR312 Specific rear rack for MONOKEY® top-caseMONOKEY® plate included / compatible with the original side-case holder


D7401NO Specific screen, matt black 35 x 28 cm (H x W)to be mounted instead of the original screen



DUCATI MULTISTRADA 1200 (15 > 18)PLR7406CAM Specific rapid release side-case holder for Trekker Outback MONOKEY® CAM-SIDE

only for S version / 18 mm diameter







ES7401 Specific support in aluminium and stainless steel to widen the surface support area of the original side standnot compatible with the original central stand



DUCATI MULTISTRADA ENDURO 1200 (16 > 18)PLR7406CAM Specific rapid release side-case holder for Trekker Outback MONOKEY® CAM-SIDE

18 mm diameter

TL1146KIT Specific kit to install the S250 Tool Box on PLR7406CAMto be combined with S250 and PLR7406CAM / it can be mounted on the left-hand side of the PLR7406CAM






DESCRIPTION


DUCA

TI - G

ILERA

DUCATI MONSTER 1200 (14 > 18)BF08 Specific flange for fitting any of the TANKLOCK, TanklockED bags

A7404 Specific screen, smoked 28,5 x 36 cm (H x W)compatible from 14 to 16 / complete with specific fitting kit


DUCATI MULTISTRADA 1260 (18) PLR7411CAM Specific rapid release side-case holder for Trekker Outback MONOKEY® CAM-SIDE

18 mm diameter

TL7411KIT Specific kit to install the S250 Tool Box on PLR7411CAMto be combined with S250 and PLR7411CAM / needs to mounted on the right-hand side of the motorcycle








GILERAGILERA RUNNER 50-125-200 (06 > 15)

SR126Specific rear rack for MONOLOCK® top-caseit is necessary to puncture the housing behind the saddle / maximum load allowed 3 Kg / to be combined with the plate already included in the MONOLOCK® top-case

GILERA NEXUS 125 - 250 - 300 - 500 (06 > 14)E682 Specific rear rack for MONOKEY® top-case

MONOKEY® plate included / it is necessary to puncture the housing behind the saddle / maximum load allowed 6Kg

E682M Specific rear plate for MONOLOCK® top-caseMONOLOCK® plate included / it is necessary to puncture the housing behind the saddle / maximum load allowed 6Kg


GILERA NEXUS 500 (05)E682 Specific rear rack for MONOKEY® top-case

MONOKEY® plate included / it is necessary to puncture the housing behind the saddle / maximum load allowed 6Kg

E682M Specific rear plate for MONOLOCK® top-caseMONOLOCK® plate included / it is necessary to puncture the housing behind the saddle / maximum load allowed 6Kg

GILERA FUOCO 500 (07 > 14)E710M s Specific rear plate for MONOLOCK® top-case


340D Specific screen, smoked 64,5 x 54,5 cm (H x W)to be combined with the specific D340KIT fitting kit

D340KIT Specific fitting kit for 340D

GILERA GP 800 (08 > 14)D352ST Specific screen, transparent 60 x 42 cm (H x W)


DESCRIPTION


HONDA

HONDAHONDA ZOOMER 50 (RUCKUS 50) (04 > 14)

128A Specific screen, transparent 74 x 67 cm (H x W)only available if article A303A is already fitted / 8 cm higher than 105A


HONDA LEAD 110 (08 > 14)314A * Specific screen, transparent 52 x 66,5 cm (H x W)


A314A * Specific fitting kit for 314A

* A MONOLOCK® TOP-CASE CAN BE FITTED USING THE UNIVERSAL PLATE INCLUDED

HONDA WAVE 110I (12 > 14)A1114A s Specific fitting kit for 1114A

only available if article 1114A is already fitted

HONDA VISION 50-110 (11 > 18)SR1153 Specific rear rack for MONOLOCK® top-case


308A Specific screen, transparent with serigraphy 52 x 66,5 cm (H x W)to be combined with the specific A1153A or A1106A fitting kit



HONDA @ 125-150 (00 > 03) 183A s Specific screen, transparent 67,9 x 66,5 cm (H x W)


HONDA CB 125F (15 > 18)SR1142 Specific rear rack for MONOLOCK® top-case

to be combined with the plate already included in the MONOLOCK® top-case / it is necessary to remove the original grab handle

PL1142 Specific pannier holder for MONOKEY® side-casescan only be used to mount cases MONOKEY® E22, DLM30A or DLM30B / can only be mounted with the specific rear rack SR1142

TN1142 Specific engine guard, blackcompatible from '15 to '16 / 25 mm diameter steel tube / we recommend fitting by a qualified mechanic

HONDA CB 125 R (18 > 19) SR1164 Specific rear rack for MONOLOCK® top-case




A1164 Specific screen, smoked 21 x 28 cm (H x W) complete with specific fitting kit



HONDA CBF 125 (09 > 14)SR157 Specific rear rack for MONOLOCK® top-case




HONDA CBR 125 (05 > 10) 262FZ Specific rear rack for MONOLOCK® top-case

we recommend mounting smaller cases MONOLOCK® in conjunction with M5M or M6M plate

HONDA CBR 125 R (11 > 17)SR1103 Specific rear rack for MONOLOCK® top-case


DESCRIPTION


HOND

A

HONDA FORZA 125 ABS (15 > 18)

SR1140 sSpecific rear rack for MONOLOCK® or MONOKEY® top-caseto be combined with the M5 or M7 MONOKEY® plate, or with the M5M or M6M MONOLOCK® plate, or with the aluminium bag holder EX2M, or with the plate already included in the MONOLOCK® top-case / maximum load allowed 6 kg


D1140STSpecific screen, transparent, 70,5 x 63 cm (H x W)not compatible with models 2018 having electrically adjustable screen / to be mounted instead of the original screen / 23 cm higher than the original / the assembly does not allow the height of the windshield to be adjusted

D1140SSpecific screen, smoked 48,5 x 39 cm (H x W)not compatible with models 2018 having electrically adjustable screen / to be mounted instead of the original screen / it does not compromise the possibility of adjusting the height of the windshield

TB1140 s Specific backrestit cannot be mounted if rack and case are installed


HONDA DYLAN 125-150 (02 > 07)128A Specific screen, transparent 74 x 67 cm (H x W)

to be combined with the specific A185A fitting kit / 8 cm higher than 102A


A185A Specific fitting kit for 128A and 102A

HONDA PANTHEON 125-150 (98 > 02)SR140 Specific rear rack for MONOLOCK® or MONOKEY® top-case


D199ST Specific screen, transparent 49,9 x 72,5 cm (H x W)to be mounted instead of the original screen

D202ST Specific screen, transparent 60 x 74,4 cm (H x W)to be mounted instead of the original screen / 10 cm higher and larger than D199ST

D199KIT fitting Kit for screens D199ST and D202ST

HONDA PANTHEON 125-150 (03 > 08)D219ST Specific screen, trasparent 63 x 72,5 cm (H x W)


HONDA PCX 125-150 (10 > 13)SR1136 Specific rear rack for MONOLOCK® top-case



D322ST Specific screen, trasparent, 59,5 x 44 cm (H x W)to be mounted instead of the original screen / 18,5 cm higher than the original

D322S Specific screen, smoked, 59,5 x 44 cm (H x W)to be mounted instead of the original screen / 18,5 cm higher than the original

323DT Specific screen, transparent 82 x 58 cm (H x W)to be combined with the specific D323KIT fitting kit / 41 cm higher than the original


HONDA PCX 125-150 (14 > 17) / PCX 150 (18)SR1136 Specific rear rack for MONOLOCK® top-case



D1136ST Specific screen, transparent 63 x 43,5 cm (H x W)to be mounted instead of the original screen

D1130ST Specific screen, transparent 81.5 x 55 cm (H x W)to be mounted instead of the original screen

TB1136 s Specific backrestit cannot be mounted if rack and case are installed


HONDA PCX 125 (18 > 19) SR1163 Specific rear rack for MONOLOCK® top-case



1129DT Specific screen, transparent 60,5 x 43,5 cm (H x W)to be combined with the specific D1163KIT fitting kit / 14,5 cm higher than the original

DESCRIPTION


HONDA

1129D Specific screen, smoked 60,5 x 43,5 cm (H x W)to be combined with the specific D1163KIT fitting kit / 14,5 cm higher than the original

D1163KIT Specific fitting kit for 1163DT, 1129DT, 1129D



HONDA SUPER CUB C125 (18) SR1168 Specific rear rack for MONOLOCK® top-case


1168A Specific screen, transparent 38,5 x 41,5 cm (H x W)to be combined with the specific A1168A fitting kit / it does not protect the hand area


HONDA SH MODE 125 (13 > 18)SR1125 Specific rear rack for MONOLOCK® top-case




HONDA SH 125-150 (01 > 04)186A Specific screen, transparent 58 x 68 cm (H x W)




HONDA SH 125I-150I (05 > 08)E219 Specific rear rack for MONOLOCK® top-case


311A Specific screen, transparent 62 x 67,5 cm (H x W)to be combined with the specific A311A fitting kit



HONDA SH 125I-150I (09 > 12)SR1155 Specific rear rack for MONOLOCK® top-case


E227 Specific rear rack for MONOLOCK® top-caseto be combined with the plate already included in the MONOLOCK® top-case




HONDA SH 125I-150I ABS (12 > 16)SR1155 Specific rear rack for MONOLOCK® top-case



D1128BL Specific "ICE" screen to be fixed with original Honda fitting kit, 36,5 x 45 cm (H x W)to be mounted instead of the original screen / when illuminated by vehicle headlights in low light conditions, the edge glows blue in colour

D1128S Specific screen smoked, to be fixed with original Honda fitting kit, 36,5 x 45 cm (H x W)to be mounted instead of the original screen

1128A Specific wind-screen to be fixed with original Honda fitting kit, 53 x 50 cm (H x W)it does not protect the hand area


A1117ASpecific fitting kit for 1117ATo mount the windshield, it is necessary to have the original pre-perforated Honda handlebar fairing which is also used to mount the original Honda windshield. If the handlebar fairing mounted to the motorcycle is not pre-perforated, it will be necessary to drill holes into it

HONDA SH 125I-150I (17 > 18)SR1155 Specific rear rack for MONOLOCK® top-case


DESCRIPTION


HOND

A

D1155ST Specific screen, transparent, to be fixed with original Honda fitting kit, 51 x 49 cm (H x W)it does not protect the hand area

D1155S Specific screen smoked, to be fixed with original Honda fitting kit, 36,5 x 45 cm (H x W)

D1155BL Specific "ICE" screen to be fixed with original Honda fitting kit, 36,5 x 45 cm (H x W)when illuminated by vehicle headlights in low light conditions, the edge glows blue in colour



HONDA S-WING 125-150 (07 > 12)D312ST Specific screen, transparent 89 x 54 cm (H x W)


HONDA XL 125V VARADERO (01 > 06)E213 Specific rear rack for MONOKEY® top-case


E217 Specific rear rack for MONOLOCK® top-casemaximum load allowed 5 Kg / to be combined with the plate already included in the MONOLOCK® top-case

D215S Specific screen, smoked 49,9 x 33,2 cm (H x W)to be mounted instead of the original screen

HONDA XL 125V VARADERO (07 > 14)E213 Specific rear rack for MONOKEY® top-case


E217 Specific rear rack for MONOLOCK® top-casemaximum load allowed 5 Kg / to be combined with the plate already included in the MONOLOCK® top-case




HONDA FORZA 125-300 (19)


D1166ST Specific screen, transparent 58 x 44,5 cm (H x W)to be mounted instead of the original screen / 11 cm higher than the original

DF1166 Pair of protective transparent handle-bar wind deflectorsspecific fitting kit included


01VKIT Specific kit to mount the Smart Mount RC S903Ait can be mounted on the brake fluid reservoir cover either on the right-hand side or left-hand side



HONDA CN 250 (89 > 00)D182S Specific screen, smoked 60,2 x 66,5 cm (H x W)


HONDA FORESIGHT 250 (97 > 08)SR140 Specific rear rack for MONOLOCK® or MONOKEY® top-case





HONDA FORZA 250 (05 > 07) E220 Specific rear rack for MONOKEY® top-case

MONOKEY® plate included / in order to attach the original backrest must be removed

E220M Specific rear plate for MONOLOCK® top-caseMONOLOCK® plate included / in order to attach the original backrest must be removed


DESCRIPTION


HONDA

HONDA FORZA 250 X / EX (08 >12)

E226Specific rear rack for MONOKEY® top-caseSpecific rear rack for MONOKEY® top-case MONOKEY® plate included / maximum load allowed 6 Kg / it is necessary to puncture the housing behind the saddle in arranged sections

E226M Specific rear plate for MONOLOCK® top-caseMONOLOCK® plate included maximum load allowed 6Kg / it is necessary to puncture the housing behind the saddle in arranged sections

D315KIT s Specific fitting kit for 315DTonly available if article 315DT is already fitted

HONDA CRF 250 L / CRF 250 RALLY (17 > 18)

SR1159Specific rear rack for MONOLOCK® or MONOKEY® top-caseto be combined with the E251 MONOKEY® plate (sold separately), or with the plate already included in the MONOLOCK® top-case / maximum load allowed 6 kg

HONDA FORZA 300 ABS (13 > 17)SR1123 Specific rear rack for MONOKEY® top-case

MONOKEY® plate included / maximum load allowed 6 kg

SR1123MM Specific rear rack for MONOLOCK® top-caseM6M MONOLOCK® plate with place for a "u" type padlock included


HONDA SH 300I (07 > 10) E223 Specific rear rack for MONOLOCK® top-case


307A Specific screen, transparent with serigraphy 58,5 x 68 cm (H x W)to be combined with the specific A307A fitting kit

308A Specific screen, transparent with serigraphy 52 x 66,5 cm (H x W)to be combined with the specific A307A fitting kit


HONDA SH 300I (11 > 14)E223 Specific rear rack for MONOLOCK® top-case


307A Specific screen, transparent with serigraphy 58,5 x 68 cm (H x W)to be combined with the specific A1100A fitting kit



AF1100 s Specific sliding wind-screen transparent, Airflow. Maximum height 48 cm (12 cm of extension) width 67 cmcomplete with specific fitting kit / to be mounted instead of the original screen

HONDA SH 300I (15 > 18)SR1155 Specific rear rack for MONOLOCK® top-case


D1100ST Specific transparent low screen to be fixed with original Honda fitting kit. 27 x 42 cm (H x W)it does not protect the hand area

D1143ST Specific wind-screen to be fixed with original Honda fitting kit 51,5 x 49 cm (H x W)it does not protect the hand area

D1143S Specific smoked low screen to be fixed with original Honda fitting kit. 27 x 42 cm (H x W)it does not protect the hand area

HONDA CB 300 R (18 > 19) SR1169 Specific rear rack for MONOLOCK® top-case




HONDA SILVER WING 400 (06 > 09)

SR19Specific rear rack for MONOKEY® top-caseMONOKEY® plate included / it is necessary to puncture the original case holder / it is necessary to puncture the housing behind the saddle in arranged sections

SR19MSpecific rear rack for MONOLOCK® top-caseMONOLOCK® plate included / it is necessary to puncture the original case holder / it is necessary to puncture the housing behind the saddle in arranged sections



AF214 Specific sliding wind-screen transparent, Airflow. Maximum height 57 cm (12 cm of extension) width 59cmcomplete with specific fitting kit / to be mounted instead of the original screen

TB19 Specific backrestit can be mounted with the SR19 / SR19M

DESCRIPTION


HOND

A

HONDA SW-T 400 - 600 (09 > 17)



D318ST Specific screen, transparent, 89 x 67 cm (H x W)to be mounted instead of the original screen / 18 cm higher than the original



HONDA CB 500 (97 > 05) / CB 500S (00 > 05)250F Specific rear rack for MONOKEY® or MONOLOCK® top-case

To be combined with the plate MONOKEY® M3, or with the plate MONOLOCK® MM

HONDA CB 500 F (13 > 15)SR1119 Specific rear rack for MONOLOCK® top-case


PL1119 Specific pannier holder for MONOKEY® side-casesit can be mounted only with the specific rear rack SR1119 / can only be used to mount cases MONOKEY® E22, DLM30A or DLM30B

TE1119 s Specific holder for Easylock side bags, or soft side bagsto be mounted only with SR1119

A1126 Specific screen, smoked 28,5 x 36 cm (H x W)complete with specific fitting kit


HONDA CB 500 F (16 > 18)1152FZ

Specific rear rack for MONOKEY® or MONOLOCK® top-caseto be combined with the MONOKEY® M5 or M7 plates, or with the MONOLOCK® M5M or M6M plates, or with the aluminium bag holder EX2M

PLX1152 Specific pannier holder for V35, V37 MONOKEY® SIDE casesit can be mounted without the specific rear rack 1152FZ using the 1152KIT

1152KIT Specific kit to install the PLX1152 without the specific rear rack 1152FZ






HONDA CB 500 X (13 > 18)

1121FZSpecific rear rack for MONOKEY® or MONOLOCK® top-caseto be combined with the MONOKEY® M5, M7, M8A, M8B, M9A or M9B plates, or with the MONOLOCK® M5M or M6M plates, or with the aluminium bag holder EX2M / if combined with M8A, M8B, M9A, M9B it does not allow the assembly of the stop light kit or the remote control device on the top-case / maximum load allowed 6 Kg / it is not compatible with the original side-case holder

PL1121CAM Specific pannier holder for Trekker Outback MONOKEY® CAM-SIDEto be combined with PL1121KIT from 2017 / 18 mm diameter / it can be mounted without the specific rear rack 1121FZ using the 1121KIT

TL3112KIT Specific kit to install the S250 Tool Box on PL1121CAMto be combined with S250 and PL1121CAM / it can be mounted on either the right-hand side or left-hand side of the motorcycle

PL1121Specific pannier holder for MONOKEY®, RETRO FIT side-casesto be combined with PL1121KIT from 2017 / it can be mounted without the specific rear rack 1121FZ using the 1121KIT / to ensure the best visibility of the rear indicators with cases mounted, it is necessary to relocate the indicators using kit IN1121KIT / only for TRK33N, TRK46N, DLM36, DLM30, E22

TL1146KIT Specific kit to install the S250 Tool Box on PL1121to be combined with S250 and PL1121 / it can be mounted on either the right-hand side or left-hand side of the motorcycle

IN1121KIT Specific kit to move the indicators to ensure optimum visibility with cases fittednot necessary with E21, E22 cases

PLX1121 Specific pannier holder for V35, V37 MONOKEY® SIDE casesto be combined with PL1121KIT from 2017 / it can be mounted without the specific rear rack 1121FZ using the 1121KIT


PL1121KIT Specific kit to install the PL1121, PLX1121, PL1121CAM on CB500X from 2017

BF20 Specific flange for fitting any of the TANKLOCK, TanklockED bagscompatible from 2016


DESCRIPTION


HONDA


PR1121 Stainless steel specific radiator guard black paintedcompatible from 2016



RM1121KIT Specific kit for spray guard RM02compatible from 2016 to 2018




HONDA CBF 500 (04 > 12)

260FZSpecific rear rack for MONOKEY® or MONOLOCK® top-caseto be combined with the MONOKEY® M5, M8A, M8B, M9A or M9B plates, or with the MONOLOCK® M5M or M6M plates, or with the aluminium bag holder EX2M / if combined with M8A, M8B, M9A, M9B it does not allow the assembly of the stop light kit or the remote control device on the top-case / it is not compatible with the original side-case holder

PL174 Specific pannier holder for MONOKEY® side-casesnot compatible with the side-cases in aluminium DLM36 Trekker Dolomiti

PLX174 Specific pannier holder for V35, V37 MONOKEY® SIDE casesit can be mounted without the specific rear rack 260FZ using the PLX174KIT


PLX174KIT Specific kit to install the PLX174 without the specific rear rack 260FZ





TE1119 s Specific holder for Easylock side bags, or soft side bagsto be mounted only with SR1119

D1119S Specific screen, smoked with logo GIVI-LCR Team. 35 x 30,5 cm (H x W)to be mounted instead of the original screen

HONDA CMX 500 REBEL (17 > 18)SR1160 Specific rear rack for MONOLOCK® or MONOKEY® top-case


TMT1160 Specific holder for pair of side bags MT501 (Metro-T range)



140A Universal transparent screen 35 x 41 cm (H x W)to be combined with the specific AL1160A fitting kit




TS1160B Backrest with detachable small luggage carrier, black

HONDA CBF 600S/ CBF 600N (04 > 12)






DESCRIPTION


HOND

A



D303ST Specific screen, transparent 54 x 39,5 cm (H x W)only for CBF 600 S / to be mounted instead of the original screen / 12,5 cm higher than the original

TN369 s Specific tubular engine guardwe recommend fitting by a qualified mechanic / compatible until '07

TN456 Specific tubular engine guardwe recommend fitting by a qualified mechanic / compatible from '08


HONDA CBR 600 F (99 > 09)252F Specific rear rack for MONOKEY® or MONOLOCK® top-case

it cannot be mounted with T208 / To be combined with the plate MONOKEY® M3, or with the plate MONOLOCK® MM

HONDA CBR 600 F (11 > 13)

1102FZSpecific rear rack for MONOKEY® or MONOLOCK® top-caseto be combined with the MONOKEY® M5, M7, M8A, M8B, M9A or M9B plates, or with the MONOLOCK® M5M or M6M plates, or with the aluminium bag holder EX2M / if combined with M8A, M8B, M9A, M9B it does not allow the assembly of the stop light kit or the remote control device on the top-case

1102KIT Specific kit to install the PLX1102 / TE1102 without the specific rear rack 1102FZ


D1105KIT s Specific fitting kit for 1105Donly available if article 1105D is already fitted

HONDA CBR 600 RR (05 > 06) BF03 Specific flange for fitting any of the TANKLOCK, TanklockED bags


HONDA CBR 600 RR (13 > 14) D1122S s Specific screen, smoked with logo GIVI-LCR Team 25 x 30 cm (H x W)


HONDA HORNET 600 / S (98 > 02)



HONDA HORNET 600 (03 > 06)



A305 Specific screen, smoked 31,2 x 40,8 cm (H x W) compatible from '05 to '06 / complete with specific fitting kit / it can be installed without removing the original light fairing

HONDA HORNET 600 / HORNET 600 ABS (07 > 10)

263FZSpecific rear rack for MONOKEY® or MONOLOCK® top-caseto be combined with the MONOKEY® M5, M7, M8A, M8B, M9A or M9B plates, or with the MONOLOCK® M5M or M6M plates, or with the aluminium bag holder EX2M / if combined with M8A, M8B, M9A, M9B it does not allow the assembly of the stop light kit or the remote control device on the top-case / it necessary to remove the original grabrails



A309 Specific screen, smoked 33,5 x 40,5 cm (H x W)only for CB 600 F Hornet / complete with specific fitting kit

A310 Specific screen, smoked 33,5 x 40,5 cm (H x W)only for Hornet ABS / complete with specific fitting kit



DESCRIPTION


HONDA

HONDA HORNET 600 / HORNET 600 ABS (11 > 13)







HONDA SILVER WING 600 / ABS (01 > 09)





AF214 Specific sliding wind-screen transparent, Airflow. Maximum height 57 cm (12 cm of extension) width 59cmcomplete with specific fitting kit / to be mounted instead of the original screen


HONDA XL 600 RM/LM E200 Specific rear rack for MONOKEY® top-case


HONDA XL 600 V TRANSALP (88)E200 Specific rear rack for MONOKEY® top-case


HONDA XL 600 V TRANSALP (89 > 93)E200 Specific rear rack for MONOKEY® top-case




HONDA XL 600 V TRANSALP (94 > 96) E200 Specific rear rack for MONOKEY® top-case



D205S Specific screen, smoked 54,2 x 38,9 cm (H x W)to be mounted instead of the original screen / 10 cm higher than D191S

D191SHonda XL 600 V Transalp (94 > 99)Specific screen, smoked 44,1 x 38,4 cm (H x W)to be mounted instead of the original screen


HONDA XL 600 V TRANSALP (97 > 99) PL131 Specific pannier holder for MONOKEY®, RETRO FIT side-cases

D205S Specific screen, smoked 54,2 x 38,9 cm (H x W)to be mounted instead of the original screen / 10 cm higher than D191S



HONDA CB650 F / CBR650F (14 > 16)


DESCRIPTION


HOND

A



TE1137 Specific holder for Easylock side bags, or soft side bagsit can be mounted without the specific rear rack 1137FZ using the 1137KIT


A1137 Specific screen, smoked 28,5 x 36 cm (H x W)only for CB650 F / complete with specific fitting kit

D1138S Specific screen, smoked with logo Team GIVI-LCR 38 x 37.5 cm (H x W)only for CBR650 F / to be mounted instead of the original screen / 5 cm higher than original

HP1137 s Specific hand protectors in ABSonly for CB650 F

02SKITSpecific kit to mount the S900A Smart Bar or the S901A Smart Mountonly for CB650 FThe S901A is compatible with the supports SGZ39SM (for Garmin Zumo 345LM / 390LM/395LM/590LM/595LM) and STTR40SM (for Tom Tom Rider 40/400/410/42/420/450/500/550)

HONDA CB 650F (17 > 18)





A1159 Specific screen, smoked 28 x 36,5 cm (H x W)complete with specific fitting kit




HONDA NT 650 V DEAUVILLE (98 > 05) SR15 Specific rear rack for MONOKEY® top-case




HONDA XL 650V TRANSALP (00 > 07)E213 Specific rear rack for MONOKEY® top-case


PL167 Specific pannier holder for MONOKEY®, RETRO FIT side-casesit is necessary to move the indicators from their original position

T213 Specific holder for soft side bagsit can be mounted with the specific rack E213

D209S Specific screen, smoked 56 x 36 cm (H x W)to be mounted instead of the original screen

TN366 Specific engine guard25 mm diameter steel tube / we recommend fitting by a qualified mechanic / mount with central stand mounted

HONDA CTX 700 DCT (14 > 16)




HONDA CTX 700N DCT (14 > 16)



DESCRIPTION


HONDA

HONDA DN-01 700 (08 > 14)

265FZSpecific rear rack for MONOKEY® or MONOLOCK® top-caseto be combined with the MONOKEY® M5, M7, M8A, M8B, M9A or M9B plates, or with the MONOLOCK® M5M or M6M plates, or with the aluminium bag holder EX2M / if combined with M8A, M8B, M9A, M9B it does not allow the assembly of the stop light kit or the remote control device on the top-case / maximum load allowed 6 Kg / it is necessary to puncture the housing behind the saddle

PLX204 s Specific pannier holder for V35, V37 MONOKEY® SIDE casesit can be mounted only with the specific rear rack 265FZ


HONDA NC700S (12 > 13) / NC750S / NC750S DCT (14 > 15)


PL1111CAM Specific pannier holder for Trekker Outback MONOKEY® CAM-SIDE18 mm diameter / it can be mounted without the specific rear rack 1111FZ using the 1111KIT

PL1111 Specific pannier holder for MONOKEY®, RETRO FIT side-casesit can be mounted without the specific rear rack 1111FZ using the 1111KIT


1111KIT Specific kit to install the PLX1111 / PL1111 / PL1111CAM / TE1111 without the specific rear rack 1111FZ




MG1109 Mudguard/specific ABS chain-cover, black colour



HONDA NC700X (12 > 13) / NC750X / NC750X DCT (14 > 15)





1111KIT Specific kit to install the PLX1111 / PL1111 / PL1111CAM / TE1111 without the specific rear rack 1111FZ


D1111ST Specific screen, transparent 49,5 x 41 cm (H x W)to be mounted instead of the original screen / 16,5 cm higher than the original






HONDA INTEGRA 700 (12 > 13)


PLX1109 Specific pannier holder for V35 MONOKEY® SIDE casesit can be mounted without the specific rear rack 1109FZ using the 1109KIT / only compatible with V35 MONOKEY® SIDE

1109KIT Specific kit to install the PL1109 / PLX1109 / TE1109 without the specific rear rack 1109FZ


D1109B Specific low sports screen gloss black 47 x 43 cm (H x W)to be mounted instead of the original screen

DESCRIPTION


HOND

A



HONDA NT 700 DEAUVILLE (06 > 12)

E221Specific rear rack for MONOKEY® top-caseMONOKEY® plate included/ it is necessary to drill the cover of the original carrier / it is necessary to puncture the housing behind the saddle in arranged sections

E221MSpecific rear plate for MONOLOCK® top-caseMONOLOCK® plate included / cover of the original carrier must be drilled / it is necessary to puncture the housing behind the saddle in arranged sections



HONDA XL 700V TRANSALP (08 > 13)E225 Specific rear rack for MONOKEY® top-case


E225M Specific rear plate for MONOLOCK® top-caseMONOLOCK® plate included



T221 Specific holder for soft side bagsit can be mounted without the specific rear rack

D313S Specific screen, smoked 44,5 x 37 cm (H x W)to be mounted instead of the original screen / 15,5 cm higher than the original




HONDA AFRICA TWIN 750 (90 > 92)E200 Specific rear rack for MONOKEY® top-case



HONDA AFRICA TWIN 750 (93 > 95) E210 Specific rear rack for MONOKEY® top-case



TN362 Specific tubular engine guardwe recommend fitting by a qualified mechanic


HONDA AFRICA TWIN 750 (96 > 02) E210 Specific rear rack for MONOKEY® top-case





HONDA BLACK WIDOW 750 (00 > 02) A23 Universal screen, 38,8 x 41 cm (H x W)

to be combined with the specific AS100A2 fitting kit / low, transparent version

A35N Universal screen, 54,9 x 46,8 cm (H x W)to be combined with the specific AS100A2 fitting kit / high and shaded bottom version

AS100A2 Specific chromed fitting kit for A23 and A35N

A41N Universal screen, 53,7 x 51,6 cm (H x W)only available if article AS300A2 is already fitted / high and shaded bottom version

DESCRIPTION


HONDA

HONDA CB 750 SEVEN FIFTY (92 > 00)232F Specific rear rack for MONOKEY® or MONOLOCK® top-case



1127FZSpecific rear rack for MONOKEY® or MONOLOCK® top-caseto be combined with the MONOKEY® M5, M7, M8A, M8B, M9A or M9B plates, or with the MONOLOCK® M5M or M6M plates, or with the aluminium bag holder EX2M / if combined with M8A, M8B, M9A, M9B it does not allow the assembly of the stop light kit or the remote control device on the top-case / maximum load allowed 6 Kg







SR1150Specific rear rack, black, for MONOLOCK® or MONOKEY® top-caseto be combined with the M5 or M7 MONOKEY® plate, or with the M5M or M6M MONOLOCK® plate, or with the aluminium bag holder EX2M

PLX1149 s Specific pannier holder for V35, V37 MONOKEY® SIDE casesit can be mounted only with the original rear rack (optional)

PLX1150 Specific pannier holder for V35, V37 MONOKEY® SIDE casesit can be mounted only with the specific rear rack SR1150




HONDA X-ADV 750 (17 > 18)


SR1156Specific rear rack for MONOLOCK® or MONOKEY® top-caseto be combined with the M5, M7, M8A, M8B, M9A or M9B MONOKEY® plate, or with the M5M or M6M MONOLOCK® plate, or with the aluminium bag holder EX2M / if combined with M8A, M8B, M9A, M9B it does not allow the assembly of the stop light kit or the remote control device on the top-case / It can only be mounted to the original rack (optional)

PL1156 Specific pannier holder for MONOKEY®, RETRO FIT side-casesit can be mounted only with the specific rear rack 1156FZ

PL1158 Specific pannier holder for MONOKEY®, RETRO FIT side-casesit can be mounted to the original rack (optional) / it cannot be mounted with the specific rear rack 1156FZ

TL1156KIT Specific kit to install the S250 Tool Box on PL1156, PL1158to be combined with S250 and PL1156 or PL1158 / needs to mounted on the left-hand side of the motorcycle

D1156STSpecific screen, transparent 65 x 40 cm (H x W)to be mounted instead of the original screen / to ensure total rotation of the handlebar, the windshield cannot be set to either the lowest or the highest settings. It can only be set to the three intermediate settings / 13 cm higher than the original





RM1156KIT Specific kit for spray guard RM02



HONDA NC750S (16 > 18)

1146FZSpecific rear rack for MONOKEY® or MONOLOCK® top-caseto be combined with the MONOKEY® M5 or M7 plates, or with the MONOLOCK® M5M or M6M plates, or with the aluminium bag holder EX2M




DESCRIPTION


HOND

A

1146KIT Specific kit to install the PLX1146 / PL1146 / PL1146CAM / TST1146 without the specific rear rack 1146FZ

TST1146 Specific holder for pair of side bags ST604 (Sport-T range)it can be mounted without the specific rear rack 1146FZ using the 1146KIT










HONDA NC750X (16 > 18)1146FZ

Specific rear rack for MONOKEY® or MONOLOCK® top-caseto be combined with the MONOKEY® M5 or M7 plates, or with the MONOLOCK® M5M or M6M plates, or with the aluminium bag holder EX2M





1146KIT Specific kit to install the PLX1146 / PL1146 / PL1146CAM / TST1146 without the specific rear rack 1146FZ


D1146ST Specific screen, transparent 48,5 x 40 cm (H x W)not compatible with the original Honda hand protectors / to be mounted instead of the original screen / 10,5 cm higher than the original










EA116 A bag created specifically for the Honda NC750X (16-19) to be mounted to the cover of the integrated storage compartment.

FB1146 Fairing upper bracket to be mounted behind the windshield to install S902A, S920M, S920L and GPS-Smartphone holderCompatible with the original windshield and the windshield D1146ST / For S902A, S920M, S920L, S952B, S953B, S954B, S955B, S956B


HONDA VFR 750 F (90 > 93) 229F Specific rear rack for MONOKEY® or MONOLOCK® top-case


HONDA VFR 750 F (94 > 97) 242F Specific rear rack for MONOKEY® or MONOLOCK® top-case


DESCRIPTION


HONDA

HONDA VT 750S (10 > 15)A23 Specific screen, transparent 38,8 x 41 cm (H x W)

to be combined with the specific AS122A2 fitting kit

HONDA VT SHADOW 750 (04 > 14)A23 Universal screen, transparent 38,8 x 41 cm (H x W)



HONDA VT SHADOW SPIRIT 750 (07 > 10) A23 Universal screen, 38,8 x 41 cm (H x W)





HONDA CROSSRUNNER 800 (11 > 14)


PLX1104 Specific pannier holder for V35, V37 MONOKEY® SIDE casesit can be mounted only with the specific rear rack 1104FZ / it is necessary to move the indicators from their original position

D1104KIT s Specific fitting kit for 1104DT

HONDA CROSSRUNNER 800 (15 > 18)

SR1139Specific rear rack for MONOLOCK® or MONOKEY® top-caseto be combined with the M5 or M7 MONOKEY® plate, or with the M5M or M6M MONOLOCK® plate, or with the aluminium bag holder EX2M / maximum load allowed 6 kg

PL1139CAM s Specific pannier holder for Trekker Outback MONOKEY® CAM-SIDE18 mm diameter / it is necessary to move the indicators from their original position

PLXR1139 s Specific rapid release side-case holder for V35, V37 MONOKEY® SIDE casesit is necessary to move the indicators from their original position

D1139ST Specific screen, transparent 55 x 42 cm (H x W)compatible from 15 to 16 / to be mounted instead of the original screen / 18 cm higher than the original

D1157ST Specific screen, transparent 55,5 x 42 cm (H x W)compatible from 17 / to be mounted instead of the original screen / 38 cm higher than the original

AF1139 Specific sliding wind-screen transparent, Airflow. Maximum height 56 cm (12 cm of extension) width 42 cmcompatible from 15 to 16 / complete with specific fitting kit / to be mounted instead of the original screen





HONDA VFR 800 (98 > 01)

257FZSpecific rear rack for MONOKEY® or MONOLOCK® top-caseto be combined with the MONOKEY® M5, M7, M8A, M8B, M9A or M9B plates, or with the MONOLOCK® M5M or M6M plates, or with the aluminium bag holder EX2M / if combined with M8A, M8B, M9A, M9B it does not allow the assembly of the stop light kit or the remote control device on the top-case / it is necessary to remove the grabrails as they are reproduced by the rack itself

PL257 Specific pannier holder for MONOKEY®, RETRO FIT side-casesit can only be mounted with the specific rear rack 257FZ


HONDA VFR 800 F (14 > 18)1132FZ

Specific rear rack for MONOKEY® or MONOLOCK® top-caseto be combined with the MONOKEY® M5, M7 plates, or with the MONOLOCK® M5M or M6M plates, or with the aluminium bag holder EX2M / maximum load allowed 6 Kg

PLXR1132 Specific rapid release side-case holder for V35, V37 MONOKEY® SIDE casesit can be mounted without the specific rear rack 1132FZ using the 1132KIT

1132KIT Specific kit to install the PLXR1132 without the specific rear rack 1132FZ


D1132S Specific screen, smoked 48,2 x 36,5 cm (H x W)to be mounted instead of the original screen / 8 cm higher than the original


DESCRIPTION


HOND

A

HONDA VFR 800 VTEC (02 > 11)



PLX166 Specific pannier holder for V35, V37 MONOKEY® SIDE cases




HONDA CB 900 HORNET (02 > 07)


240A Universal screen, smoked 33 x 36,5 cmonly available if article A257A is already fitted

HONDA CB 1000 R (08 > 17)





247A Universal screen, smoked 29 x 28,5 cm (H x W)compatible from '11 / only available if article A1101A is already fitted

247N Specific screen, black 29 x 28,5 cm (H x W)only for CB 1000 R (11 > 14) / only available if article A1101A is already fitted


HONDA CB 1000 R (18)

1165FZSpecific rear rack for MONOKEY® or MONOLOCK® top-caseto be combined with the MONOKEY® M5, M7, M8A, M8B, M9A or M9B plates, or with the MONOLOCK® M5M or M6M plates, or with the aluminium bag holder EX2M / if combined with M8A, M8B, M9A, M9B it does not allow the assembly of the stop light kit or the remote control device on the top-case / we recommend fitting by a qualified mechanic / it is necessary to move the indicators from their original position

TE1165 Specific holder for Easylock side bags, or soft side bagsit can be mounted without the specific rear rack 1165FZ using the 1165KIT / it is necessary to move the indicators from their original position

1165KIT Specific kit to install the TE1165 without the specific rear rack 1165FZwe recommend fitting by a qualified mechanic




SLD01AL Frame slider made in polymer reinforced in Fiberglass with CNC made anodized aluminium insertTo be combined with the motorcycle specific SLD…KIT screw kit

SLD01RE Frame slider made in polymer reinforced in Fiberglass with red CNC made anodized aluminium insertTo be combined with the motorcycle specific SLD…KIT screw kit

SLD01GR Frame slider made in polymer reinforced in Fiberglass with green CNC made anodized aluminium insertTo be combined with the motorcycle specific SLD…KIT screw kit

SLD01BK Frame slider made in polymer reinforced in Fiberglass with black CNC made anodized aluminium insertTo be combined with the motorcycle specific SLD…KIT screw kit


HONDA CBF 1000 / ABS (06 > 09)





DESCRIPTION


HONDA




D303ST Specific screen, transparent 54 x 39,5 cm (H x W)to be mounted instead of the original screen / 12,5 cm higher than the original


HONDA CBF 1000 / CBF 1000 ST (10 > 14)

SR777Specific rear rack for MONOKEY® top-caseMONOKEY® plate included / it is necessary to remove the grabrails as they are reproduced by the rack itself / compatible with the original side-case holder

SR777MSpecific rear rack for MONOLOCK® top-caseMONOLOCK® plate included / it is necessary to remove the grabrails as they are reproduced by the rack itself / compatible with the original side-case holder

PLXR208 Specific rapid release side-case holder for V35, V37 MONOKEY® SIDE casesit can only be mounted with the specific rear rack SR777 / SR777M or 777KIT

PL208 s Specific pannier holder for MONOKEY®, RETRO FIT side-casesit can only be mounted with the specific rear rack SR777 / SR777M or 777KIT

777KIT Specific kit to install the PL208 / PLXR208 without the specific rear rack SR777 / SR777M


D320ST Specific screen, transparent 49 x 42,5 cm (H x W)to be mounted instead of the original screen / 15 cm higher than the original / adjustable as the original

TN460 s Specific engine guard25 mm diameter steel tube / we recommend fitting by a qualified mechanic


HONDA CBR 1000 F (89 > 92) 227F s Specific rear rack for MONOKEY® or MONOLOCK® top-case


HONDA CBR 1000 F (93 > 00) 227F s Specific rear rack for MONOKEY® or MONOLOCK® top-case


HONDA CBR 1000 RR (08 > 09)BF03 Specific flange for fitting any of the TANKLOCK, TanklockED bags

HONDA CBR 1000 RR (12 > 13)BF03 Specific flange for fitting any of the TANKLOCK, TanklockED bags


HONDA CRF1000L AFRICA TWIN (16 > 17)

SR1144Specific rear rack for MONOLOCK® or MONOKEY® top-caseto be combined with the M5, M7, M8A, M8B, M9A or M9B MONOKEY® plate, or with the M5M or M6M MONOLOCK® plate, or with the aluminium bag holder EX2M / if combined with M8A, M8B, M9A, M9B it does not allow the assembly of the stop light kit or the remote control device on the top-case


S250KIT * Universal kit to install the S250 Tool Boxit can be mounted on the left-hand side of the PL1144CAM / To be combined with S250 and the specific pannier holder

PLR1144 Specific rapid release side-case holder for MONOKEY®, RETRO FIT casesit is necessary to move the indicators from their original position

TL1144KITSpecific kit to install the S250 Tool Box on PLR1144to be combined with S250 and PLR1144 / needs to mounted on the left-hand side of the motorcycle / not compatible with the side-cases in aluminium TREKKER DOLOMITI

BF25 Specific flange for fitting any of the TANKLOCK bagsCompatible only with XS320 Tanklock bag

D1144S Specific screen, smoked 47,5 x 35 cm (H x W)2 cm higher than the original / to be mounted instead of the original screen

D1144ST Specific screen, transparent 60 x 35 cm (H x W)14,5 cm higher than the original / to be mounted instead of the original screen

D1144BO Specific low and sports screen matt black 40 x 31 cm (H x W)to be mounted instead of the original screen

AF1144 Specific sliding wind-screen transparent, Airflow. Maximum height 63,5 cm (12 cm of extension) width 35 cm18 cm higher than the original / to be mounted instead of the original screen

DESCRIPTION


HOND

A

TN1144 Specific engine guard, blacknot compatible with CRF1000L Africa Twin DCT / 25 mm diameter steel tube / we recommend fitting by a qualified mechanic

TNH1144Specific engine guard, blackit must be mounted with TN1144, TN1144OX, TN1162, TN1162OX, TN1151 or TN1151OX / 25 mm diameter steel tube / we recommend fitting by a qualified mechanic / it protects the upper part of the radiators

TN1144OX Specific engine guard, stainless steelnot compatible with CRF1000L Africa Twin DCT / 25 mm diameter steel tube / we recommend fitting by a qualified mechanic

TNH1144OXSpecific engine guard, stainless steelit must be mounted with TN1144, TN1144OX, TN1162, TN1162OX, TN1151 or TN1151OX / 25 mm diameter steel tube / we recommend fitting by a qualified mechanic / it protects the upper part of the radiators

TN1151 s Specific engine guard, blackonly for CRF1000L Africa Twin DCT / 25 mm diameter steel tube / we recommend fitting by a qualified mechanic

TN1151OX s Specific engine guard, stainless steelonly for CRF1000L Africa Twin DCT / 25 mm diameter steel tube / we recommend fitting by a qualified mechanic

TN1162 Specific engine guard, blackonly for CRF1000L Africa Twin DCT / 25 mm diameter steel tube / we recommend fitting by a qualified mechanic

TN1162OX Specific engine guard, stainless steelonly for CRF1000L Africa Twin DCT / 25 mm diameter steel tube / we recommend fitting by a qualified mechanic

RP1144 Oil carter protector in Aluminiumthickness of 5 mm

RP1144KIT Specific kit to install RP1144 on the version produced without an original oil carter protectorto be combined with RP1144


S281 Pair of 316L stainless steel universal manifold protectors. Suitable for motorcycles with manifold diameters between 32 mm and 42 mm.

HP1144 Specific hand protectors in ABSonly compatible with the version produced with original hand protectors / to be mounted instead of the original hand protectors


1144E163KIT Specific kit to mount the support for metal Jerry can E163 on the PL1144CAM

S902AUniversal anodized aluminium support to install GPS and smartphone holders S952B, S953B, S954B, S955B, S956B, S957B and GPS holders SGZ39SM and STTR40SM To be mounted on motorbikes with a cross piece located behind the windshield with a diameter between 11.5mm and 14mm, or on the upper fairing brackets FB_ _ _



HONDA CRF1000L AFRICA TWIN (18)


PLR1161 Specific rapid release side-case holder for MONOKEY®, RETRO FIT casesit can be mounted without the specific rear rack SR1162 using the 1161KIT

PL1161CAM Specific pannier holder for Trekker Outback MONOKEY® CAM-SIDEit can be mounted without the specific rear rack SR1162 using the 1161KIT / 18 mm diameter

1161KIT Specific kit to install the PLR1161 / PL1161CAM without the specific rear rack SR1161

TL1161KIT Specific kit to install the S250 Tool Box on PLR1161, PL1161CAMto be combined with S250 and PLR1161 or PL1161CAM / needs to mounted on the left-hand side of the motorcycle


D1144S Specific screen, smoked 47,5 x 35 cm (H x W)2 cm higher than the original / to be mounted instead of the original screen

D1144ST Specific screen, transparent 60 x 35 cm (H x W)14,5 cm higher than the original / to be mounted instead of the original screen




TNH1144Specific engine guard, blackit must be mounted with TN1144, TN1144OX, TN1162, TN1162OX / 25 mm diameter steel tube / we recommend fitting by a qualified mechanic / it protects the upper part of the radiators


TNH1144OXSpecific engine guard, stainless steelit must be mounted with TN1144, TN1144OX, TN1162, TN1162OX / 25 mm diameter steel tube / we recommend fitting by a qualified mechanic / it protects the upper part of the radiators

TN1162 Specific engine guard, blackonly for CRF1000L Africa Twin DCT / 25 mm diameter steel tube / we recommend fitting by a qualified mechanic

DESCRIPTION


HONDA

TN1162OX Specific engine guard, stainless steelonly for CRF1000L Africa Twin DCT / 25 mm diameter steel tube / we recommend fitting by a qualified mechanic







HONDA CRF1000L AFRICA TWIN ADVENTURE SPORTS (18)



PL1161CAM Specific pannier holder for Trekker Outback MONOKEY® CAM-SIDEit can be mounted without the specific rear rack SR1161 using the 1161KIT / 18 mm diameter

1161KIT Specific kit to install the PLR1161 / PL1161CAM without the specific rear rack SR1161

TL1161KIT Specific kit to install the S250 Tool Box on PLR1161, PL1161CAMto be combined with S250 and PLR1161 or PL1161CAM / needs to mounted on the left-hand side of the motorcycle



D1144ST Specific screen, transparent 60 x 35 cm (H x W)7 cm higher than the original / to be mounted instead of the original screen



TN1161OX Specific engine guard, stainless steelnot compatible with DCT / 25 mm diameter steel tube / we recommend fitting by a qualified mechanic

TN1167OX Specific engine guard, stainless steelonly compatible with the version DCT / 25 mm diameter steel tube / we recommend fitting by a qualified mechanic


LS1161OX Specific fitting kit to mount S310, S321 or S322 spotlights, using the threads of the original crash bars located on the sides of the fairing.






HONDA VTR 1000 F (97 > 04)251F Specific rear rack for MONOKEY® or MONOLOCK® top-case


HONDA XL 1000V VARADERO (99 > 02) E212 Specific rear rack for MONOKEY® top-case




D203ST Specific screen, transparent 62,4 x 55 cm (H x W)to be mounted instead of the original screen

DESCRIPTION


HOND

A


HONDA XL 1000V VARADERO / ABS (03 > 06) E212 Specific rear rack for MONOKEY® top-case






HONDA XL 1000V VARADERO / ABS (07 > 12)E222 Specific rear rack for MONOKEY® top-case






TN454 Specific engine guard25 mm diameter steel tube / we recommend fitting by a qualified mechanic / compatible until year 2010

HONDA CB 1100 (13-14)SR1118 Specific rear chromed rack for MONOLOCK® or MONOKEY® top-case



HONDA CBR 1100 XX (97 > 09) 248F Specific rear rack for MONOKEY® or MONOLOCK® top-case


Y158 Specific kit for MONOKEY® top-case and for two MONOKEY® side-casesTo be combined with the frame Wingrack N140

HONDA ST 1100 PAN EUROPEAN E190 Specific rear rack for MONOKEY® top-case



HONDA CROSSTOURER 1200 / CROSSTOURER 1200 DCT (12 > 18))SR1110 Specific rear rack for MONOKEY® top-case

maximum load allowed 6 kg / MONOKEY® plate included

SRA1110Specific rear rack in aluminium for MONOKEY® top-casemaximum load allowed 6kg / it does not allow the assembly of the stop light kit or the remote control device on the top-case / to be mounted on the original carrier



PLR1110CAM Specific rapid release side-case holder for Trekker Outback MONOKEY® CAM-SIDE18 mm diameter

BF03 Specific flange for fitting any of the TANKLOCK bagscompatible from 12 to 13

BF20 Specific flange for fitting any of the TANKLOCK bagsfrom 2014 onwards

D1110ST Specific screen, transparent 51 x 42 cm (H x W)compatible from 12 to 15 / to be mounted instead of the original screen / 19 cm higher than the original

AF1110 Specific sliding wind-screen transparent, Airflow. Maximum height 53 cm (12 cm of extension) width 41 cmcompatible from 12 to 15 / to be mounted instead of the original screen

EH1110 Extension in smoked plexiglass for original hand protectorscompatible from 12 to 16


RP1141 s Oil carter protector in Aluminiumonly for Crosstourer 1200 DCT

DESCRIPTION


KAWASAKI - KEEWAYKTM - KIMCO - LML - MASH



HONDA VFR 1200 F (10 > 16)

267FZ

Specific rear rack for MONOKEY® or MONOLOCK® top-caseto be combined with the MONOKEY® M5, M7, M8A, M8B, M9A or M9B plates, or with the MONOLOCK® M5M or M6M plates, or with the aluminium bag holder EX2M / if combined with M8A, M8B, M9A, M9B it does not allow the assembly of the stop light kit or the remote control device on the top-case / A larger grab rail for the passenger is included therefore it is necessary to remove the original grab rails / is compatible with the original side-case holder



HONDA CB 1300 / CB 1300 S (03 > 09)



HONDA CB 1300 S (10 > 15)




HONDA CTX 1300 (14 > 16)SR1134 s Specific rear rack for MONOKEY® top-case




HONDA PAN EUROPEAN ST 1300 (02 > 14)E215 Specific rear rack for MONOKEY® top-case

to be fitted to the original rack / MONOKEY® plate included

KAWASAKIKAWASAKI Z125 (19)


4125S Specific screen, smoked 27,5 x 33,5 cm (H x W)to be combined with the specific A4125A fitting kit

4125GRSpecific screen, "LIME" 27,5 x 33,5 cm (H x W)to be combined with the specific A4125A fitting kit / 19 when illuminated by vehicle headlights in low light conditions, the edge glows green in colour

A4125A Specific fitting kit for 4125S, 4125GR

KAWASAKI NINJA 250 R (08 > 12)TE4107 s Specific holder for Easylock side bags, or soft side bags

it can be mounted without the specific rear rack 4107FZ using the 4107KIT

4107KIT s Specific kit to install the TE4107 without the specific rear rack 4107FZ

KAWASAKI NINJA 300 (13 > 18)





DESCRIPTION


KAWA

SAKI

- KEE

WAY

KTM

- KIM

CO -

LML -

MAS

H

D4108S Specific screen, smoked with logo GIVI-LCR Team 42 x 34 cm (H x W)to be mounted instead of the original screen / 9 cm higher than the original

KAWASAKI J125 / J300 (14 > 18)SR4111 Specific rear rack for MONOKEY® top-case


SR4111MM Specific rear rack for MONOLOCK® top-caseM6M MONOLOCK® plate with space for a "u" type padlock included

4111DT Specific screen, transparent 79,5 x 65 cm (H x W)to be combined with the specific D4111KIT fitting kit


KAWASAKI Z300 (15 > 16)



KAWASAKI VERSYS-X 300 (17 > 18)E251 Universal MONOKEY® plate including fitting kit to fit a top-case onto scooters or bikes with a rear rack already fitted






D4121GRSpecific "LIME" screen, 41 x 40 cm (H x W)to be mounted instead of the original screen / when illuminated by vehicle headlights in low light conditions, the edge glows green in colour / 7 cm higher than the original





KAWASAKI KLE 500 (91 > 00)


KAWASAKI ER 5 500 (98 > 00)432F Specific rear rack for MONOKEY® or MONOLOCK® top-case


KAWASAKI ER 5 500 (01 > 07)440F Specific rear rack for MONOKEY® or MONOLOCK® top-case


KAWASAKI ER 6N / ER 6F 650 (05 > 08)445FZ Specific rear rack for MONOLOCK® top-case

to be combined with the MONOLOCK® M5M or M6M plates / maximum load allowed 6 kg




245N Universal screen, black 33,5 x 29 cm (H x W)only for ER-6N / only available if article A445A is already fitted

KAWASAKI ER-6N / ER-6F 650 (09 > 11)

449FZSpecific rear rack for MONOKEY® or MONOLOCK® top-caseto be combined with the MONOKEY® M5, M7, M8A, M8B, M9A or M9B plates, or with the MONOLOCK® M5M or M6M plates, or with the aluminium bag holder EX2M / if combined with M8A, M8B, M9A, M9B it does not allow the assembly of the stop light kit or the remote control device on the top-case / it is necessary to remove original grabrails


DESCRIPTION





247N Specific screen, black 29 x 28,5 cm (H x W)only for ER-6N / only available if article A448A is already fitted


KAWASAKI ER-6N / ER-6F 650 (12 > 16)





A4104 Specific screen, smoked 32 x 30 cm (H x W)only for version ER-6n / complete with specific fitting kit

D4104S s Specific screen, smoked 50 x 40 cm (H x W)only for version ER-6f / to be mounted instead of the original screen / 10 cm higher than the original

03SKITSpecific kit to mount the S900A Smart Bar or the S901A Smart Mountonly for version ER-6fThe S901A is compatible with the supports SGZ39SM (for Garmin Zumo 345LM / 390LM/395LM/590LM/595LM) and STTR40SM (for Tom Tom Rider 40/400/410/42/420/450/500/550)

KAWASAKI ZZR 600 (93 > 01)423F Specific rear rack for MONOKEY® or MONOLOCK® top-case


KAWASAKI KLR 650 ENDURO (07 > 18)E581 Specific rear rack for MONOKEY® top-case


E581M s Specific rear rack for MONOLOCK® top-caseto be combined with the plate already included in the MONOLOCK® top-case


408D Specific screen, smoked 54 x 35 cm (H x W)to be combined with the specific D408KIT fitting kit / 23 cm higher than the original

D408KIT Specific fitting kit for 408D


KAWASAKI VERSYS 650 (06 > 09)


PL447Specific pannier holder for MONOKEY®, RETRO FIT side-casesit can be mounted without the specific rear rack 447FZ using the PLX447KIT / it is necessary to move the indicators from their original position

PLX447Specific pannier holder for V35, V37 MONOKEY® SIDE casesit can be mounted without the specific rear rack 447FZ using the PLX447KIT / it is necessary to move the indicators from their original position

PLX447KIT Specific kit to install the PL447 / PLX447 without the specific rear rack 447FZ







PLR450 Specific rapid release side-case holder for MONOKEY®, RETRO FIT casesit can be mounted without the specific rear rack 451FZ using the 450KIT / it is necessary to move the indicators from their original position

PLXR450 sSpecific rapid release side-case holder for V35, V37 MONOKEY® SIDE casescan be mounted without the specific rear rack 451FZ Monorack using the 450KIT / it is necessary to move the indicators from their original position

DESCRIPTION


KAWA

SAKI

- KEE

WAY

KTM

- KIM

CO -

LML -

MAS

H

4103KIT s Specific kit to install the PL4103CAM without the specific rear rack 451FZ

450KIT s Specific kit to install the PLR450 / PLXR450 without the specific rear rack 451FZ










SR4114Specific rear chromed rack for MONOLOCK® or MONOKEY® top-caseto be combined with the M5, M7, M8A, M8B, M9A or M9B MONOKEY® plate, or with the M5M or M6M MONOLOCK® plate, or with the aluminium bag holder EX2M / if combined with M8A, M8B, M9A, M9B it does not allow the assembly of the stop light kit or the remote control device on the top-case

PL4114Specific pannier holder for MONOKEY®, RETRO FIT side-casesit can be mounted without the specific rear rack SR4114 using the 4114KIT / to ensure the best visibility of the rear indicators with cases mounted, it is necessary to relocate the indicators using kit IN4114KIT


PLX4114 Specific pannier holder for V35, V37 MONOKEY® SIDE casesit can be mounted without the specific rear rack SR4114 using the 4114KIT / it is necessary to move the indicators from their original position

4114KIT Specific kit to install the PLX4114 / PL4114 / TE4114 without the specific rear rack SR4114

IN4114KIT Specific kit to move the indicators to ensure optimum visibility with cases fitted

TE4114 Specific holder for Easylock side bags, or soft side bagsIt can only be mounted with SR4114 or 4114KIT


D4114ST Specific screen, transparent, 53 x 44 cm (H x W) compatible from '15 to '16 / to be mounted instead of the original screen

D4105ST Specific screen, transparent 49 x 48 cm (H x W)compatible from '15 to '16 / to be mounted instead of the original screen / 16 cm higher than the original

D4122ST Specific screen, transparent, 53 x 44 cm (H x W) compatible from 17 / to be mounted instead of the original screen

AF4105 Specific sliding wind-screen transparent, Airflow. Maximum height 52 cm (12 cm of extension), width 48 cmcompatible from '15 to '16 / complete with specific fitting kit / to be mounted instead of the original screen










FB4114Fairing upper bracket to be mounted behind the windshield to install S902A, S920M, S920L and GPS-Smartphone holderCompatible with the original windshield and the windshield D4114ST / For S902A, S920M, S920L, S952B, S953B, S954B, S955B, S956B, S957B


DESCRIPTION



KAWASAKI VULCAN S 650 (15 > 18)PL4115 Specific pannier holder for MONOKEY®, RETRO FIT side-cases

TS4115B Backrest with detachable small luggage carrier, black

KAWASAKI NINJA 650 (17 > 18)D4119S Specific screen, smoked 44,5 x 33,5 cm (H x W)


KAWASAKI Z 650 (17 > 18)





A4117 Specific screen, smoked 28 x 33 cm (H x W)complete with specific fitting kit

A4117GR Specific "LIME" screen 28 x 33 cm (H x W)complete with specific fitting kit / when illuminated by vehicle headlights in low light conditions, the edge glows green in colour


KAWASAKI ZR 7 / ZR 7 S 750 (99 > 04)436F Specific rear rack for MONOKEY® or MONOLOCK® top-case


KAWASAKI Z 750 (03 > 06)



KAWASAKI Z 750 (07 > 14)

448FZSpecific rear rack for MONOKEY® or MONOLOCK® top-caseto be combined with the MONOKEY® M5, M7, M8A, M8B, M9A or M9B plates, or with the MONOLOCK® M5M or M6M plates, or with the aluminium bag holder EX2M / if combined with M8A, M8B, M9A, M9B it does not allow the assembly of the stop light kit or the remote control device on the top-case / maximum load allowed 6 Kg / it is necessary to move the indicators from their original position


TE265Specific holder for Easylock side bags, or soft side bagsit can be mounted without the specific rear rack 448FZ using T265KIT / it is necessary to move the indicators from their original position


05SKITSpecific kit to mount the S900A Smart Bar or the S901A Smart Mountalso for version Z750R (11 > 14) / The S901A is compatible with the supports SGZ39SM (for Garmin Zumo 345LM / 390LM/395LM/590LM/595LM) and STTR40SM (for Tom Tom Rider 40/400/410/42/420/450/500/550)

KAWASAKI Z 750 S (05 > 07)



KAWASAKI Z 800 (13 > 17)







DESCRIPTION


KAWA

SAKI

- KEE

WAY

KTM

- KIM

CO -

LML -

MAS

H

KAWASAKI VN 800 CLASSIC (96 > 02)A37N Specific screen, transparent 54 x 47,2 cm (H x W)

high and shaded bottom version / only available if article AS126A2 is already fitted

KAWASAKI W 800 (11 > 17)PL4101 Specific pannier holder for MONOKEY® side-cases

not compatible with the side-cases in aluminium DLM36 Trekker Dolomiti



KAWASAKI VN 900 CUSTOM / CLASSIC / VULCAN 900 CUSTOM / CLASSIC (06 > 18)PL4102 Specific pannier holder for MONOKEY®, RETRO FIT side-cases

A37N Specific screen, 54 x 47,2 cm (H x W)only for Classic version / to be combined with the specific AS128A2 fitting kit / high and shaded bottom version

AS128A2 Specific chromed rack for screen A36 and A37Nonly for Classic version

A23 Universal screen, 38,8 x 41 cm (H x W)only for Custom version / to be combined with the specific AS100A2 fitting kit / low, transparent version

A35N Universal screen, 54,9 x 46,8 cm (H x W)only for Custom version / to be combined with the specific AS100A2 fitting kit / high and shaded bottom version

AS100A2 Specific chromed fitting kit for A23 and A35Nonly for Custom version

A41N Universal screen, 53,7 x 51,6 cm (H x W)only for Custom version / only available if article AS300A2 is already fitted / high and shaded bottom version

KAWASAKI Z 900 (17 > 18)



4118KIT Specific kit to install the TST4118 without the specific rear rack 4118FZ



A4118GR Specific "LIME" screen 37 x 32 cm (H x W)complete with specific fitting kit / when illuminated by vehicle headlights in low light conditions, the edge glows green in colour



KAWASAKI Z 900 RS (18) SR4124 Specific rear rack for MONOLOCK® or MONOKEY® top-case


PL4124 Specific pannier holder for MONOKEY® side-casescan only be used to mount cases MONOKEY® E22, DLM30A or DLM30B / it can be mounted only with the specific rear rack SR4124



A200 Universal screen, smoked 29,5 x 34 cmto be combined with the specific A4124A fitting kit

A210 Universal screen, smoked 36,5 x 35 cmto be combined with the specific A4124A fitting kit

A4124A Specific fitting kit for A200, A210

A801 Specific smoked screen with ABS fairingto be combined with the specific AC4124A fitting kit

AC4124A Specific fitting kit A801


05SKITSpecific kit to mount the S900A Smart Bar or the S901A Smart Mountalso for version Z 900 RS CAFE / The S901A is compatible with the supports SGZ39SM (for Garmin Zumo 345LM / 390LM/395LM/590LM/595LM) and STTR40SM (for Tom Tom Rider 40/400/410/42/420/450/500/550)

DESCRIPTION



KAWASAKI KLV 1000 (04 > 10)E528 Specific rear rack for MONOKEY® top-case


E528M Specific rear rack for MONOLOCK® top-caseto be combined with the plate already included in the MONOLOCK® top-case



D260ST Specific screen, transparent 57 x 48 cm (H x W)compatible with models from '04 / to be mounted instead of the original screen / 18 cm higher than the original



KAWASAKI VERSYS 1000 (12 > 14)SR4105 Specific rear rack for MONOKEY® top-case


SR4105M Specific rear rack for MONOLOCK® top-caseto be combined with the plate already included in the MONOLOCK® top-case

SRA4105 s Specific rear rack in aluminium for MONOKEY® top-casemaximum load allowed 6kg / it does not allow the assembly of the stop light kit or the remote control device on the top-case




AF4105 Specific sliding wind-screen transparent, Airflow. Maximum height 52 cm (12 cm of extension), width 48 cmcomplete with specific fitting kit / to be mounted instead of the original screen











D4113ST Specific screen, transparent, 53 x 45 cm (H x W)to be mounted instead of the original screen











DESCRIPTION


KAWA

SAKI

- KEE

WAY

KTM

- KIM

CO -

LML -

MAS

H


TL1146KIT Specific kit to install the S250 Tool Box on PLR4120to be combined with S250 and PLR4120 / it can be mounted on either the right-hand side or left-hand side of the motorcycle









KAWASAKI Z 1000 (07 > 09)

448FZ

Specific rear rack for MONOKEY® or MONOLOCK® top-caseto be combined with the MONOKEY® M5, M7, M8A, M8B, M9A or M9B plates, or with the MONOLOCK® M5M or M6M plates, or with the aluminium bag holder EX2M / if combined with M8A, M8B, M9A, M9B it does not allow the assembly of the stop light kit or the remote control device on the top-case / maximum load allowed 6 Kg / it is necessary to move the indicators from their original position

KAWASAKI Z 1000 (10 > 13)BF04 Specific flange for fitting any of the TANKLOCK, TanklockED bags

KAWASAKI Z 1000 (14 > 18)BF32 Specific flange for fitting any of the TANKLOCK, TanklockED bags

KAWASAKI Z 1000 SX (11 > 16)




BF04 Specific flange for fitting any of the TANKLOCK, TanklockED bagscompatible from 2011 to 2013

4100D Specific screen, smoked 56 x 37 cm (H x W)to be combined with the specific D4100KIT fitting kit / 14 cm higher than the original

D4100KIT s Specific fitting kit for 4100D

KAWASAKI Z 1000 SX (17 > 18)





KAWASAKI NINJA H2 SX (18)

4123FZSpecific rear rack for MONOKEY® or MONOLOCK® top-caseto be combined with the MONOKEY® M5 or M7 plates, or with the MONOLOCK® M5M or M6M plates, or with the aluminium bag holder EX2M / maximum load allowed 6 kg / it is not compatible with the original side-case holder




KAWASAKI ZRX 1100 / ZRX 1100 S (97 > 01)433F Specific rear rack for MONOKEY® or MONOLOCK® top-case

To be combined with the plate MONOKEY® M3, or with the plate MONOLOCK® MM / maximum load allowed 6 Kg

DESCRIPTION



D174S Specific screen, smoked 36,2 x 32,1 cm (H x W)to be mounted instead of the original screen / for faired version

KAWASAKI ZZR 1100 (93 > 01)422F Specific rear rack for MONOKEY® or MONOLOCK® top-case


KAWASAKI ZZR 1200 (02 > 05)

441FZSpecific rear rack for MONOKEY® or MONOLOCK® top-caseto be combined with the MONOKEY® M5, M7, M8A, M8B, M9A or M9B plates, or with the MONOLOCK® M5M or M6M plates, or with the aluminium bag holder EX2M / if combined with M8A, M8B, M9A, M9B it does not allow the assembly of the stop light kit or the remote control device on the top-case / it is necessary to remove the grabrails as they are reproduced by the rack itself


KAWASAKI ZRX 1200 (02)433F Specific rear rack for MONOKEY® or MONOLOCK® top-case


KAWASAKI ZRX 1200 R (02)433F Specific rear rack for MONOKEY® or MONOLOCK® top-case


D174S Specific screen, smoked 36,2 x 32,1 cm (H x W)to be mounted instead of the original screen / for faired version

KAWASAKI ZRX 1200 S (01 > 02) 433F Specific rear rack for MONOKEY® or MONOLOCK® top-case


KAWASAKI GTR 1400 (07 > 15)SR410 Specific rear rack for MONOKEY® top-case


D407ST Specific screen, transparent 58 x 53 cm (H x W)8,5 cm higher than the original (07 > 09) / 2,5 cm higher than the original (10) / to be mounted instead of the original screen

KAWASAKI ZZR 1400 / ZX 14 (06 > 11) PLX446 Specific pannier holder for V35, V37 MONOKEY® SIDE cases

KAWASAKI ZZR 1400 (12 > 18)



D4106S s Specific screen, smoked 42 x 36 cm (H x W)to be mounted instead of the original screen

KEEWAYKEEWAY GOCCIA 50 (09 > 11)

107A Specific screen, transparent 50,8 x 66 cm (H x W) only available if article A851A is already fitted

KEEWAY RY6 50 (10 > 11)288A Specific screen, transparent 56 x 71,5 cm (H x W)


KEEWAY RY8 50 EVO SPORT (10 > 11)288A Specific screen, transparent 56 x 71,5 cm (H x W)


A852A s Specific fitting kit, black for 288A

KEEWAY LOGIK 125-150 (13 > 15)308A Specific screen, transparent with serigraphy 52 x 66,5 cm (H x W)



KEEWAY OUTLOOK 125-150 (09)120A s Specific screen, transparent 66 x 67 cm (H x W)


DESCRIPTION


KAWA

SAKI

- KEE

WAY

KTM

- KIM

CO -

LML -

MAS

H

KTMKTM DUKE 125-200-390 (11 > 16)



247A Universal screen, smoked 29 x 28,5 cm (H x W)to be combined with the specific A7701A fitting kit

247N Specific screen, black 29 x 28,5 cm (H x W)to be combined with the specific A7701A fitting kit

A7701A s Specific fitting kit for 247A and 247N


KTM DUKE 125-390 (17 > 18)7707FZ Specific rear rack for MONOLOCK® top-case






KTM DUKE 690 (12 > 18)


245A Universal screen, smoked 33,5 x 29 cm (H x W)to be combined with the specific A7702A fitting kit

245N Universal screen, black 33,5 x 29 cm (H x W)to be combined with the specific A7702A fitting kit

A7702A Specific fitting kit for 245A, 245N


KTM DUKE 790 (18)

SR7708Specific rear rack for MONOKEY® top-caseto be combined with the M7, M8A, M8B, M9A or M9B MONOKEY® plate / if combined with M8A, M8B, M9A, M9B it does not allow the assembly of the stop light kit or the remote control device on the top-case



A7708OR Specific "ORANGE" screen 25 x 31 cm (H x W)complete with specific fitting kit / when illuminated by vehicle headlights in low light conditions, the edge glows orange in colour



KTM ADVENTURE 950 / 990 (03 > 14)SR7700 Specific rear rack for MONOKEY® top-case



ES7703 Specific support in aluminium and stainless steel to widen the surface support area of the original side standfor 2013 only


KTM 990 SMT (09 > 16)SRA750 s Specific rear rack in aluminium for MONOKEY® top-case



DESCRIPTION




KTM SUPER DUKE 990


KTM 1050 ADVENTURE (15 > 16) / 1090 ADVENTURE (17 > 18)

SR7705Specific rear rack for MONOLOCK® or MONOKEY® top-caseto be combined with the M5 or M7 MONOKEY® plate, or with the M5M or M6M MONOLOCK® plate, or with the aluminium bag holder EX2M




BF11 Specific flange for fitting any of the TANKLOCK bags

D7703ST Specific screen, trasnparent, 37 x4 1 cm (H x W)to be mounted instead of the original screen / 17 cm higher than the original






KTM 1190 ADVENTURE / ADVENTURE R (13 > 16)





BF11 Specific flange for fitting any of the TANKLOCK bagsonly for EA118 TANKLOCK bag or EA123 TANKLOCK bag

D7703ST Specific screen, trasnparent, 37 x4 1 cm (H x W)to be mounted instead of the original screen / 17 cm higher than the original


TN7703 Specific engine guardonly for 1190 Adventure / 25 mm diameter steel tube / we recommend fitting by a qualified mechanic


ES7703 Specific support in aluminium and stainless steel to widen the surface support area of the original side standfor 2013 only

ES7704 Specific support in aluminium and stainless steel to widen the surface support area of the original side standcompatible from 2014


KTM 1290 SUPERDUKE (13 > 18)BF11 Specific flange for fitting any of the TANKLOCK, TanklockED bags

KTM 1290 SUPER ADVENTURE (15 > 16) / 1290 SUPER ADVENTURE T (17)




PL7705CAMKIT Specific kit to install the PL7705CAM on KTM 1290 Super Adventure T (17)only for 1290 Super Adventure T (17)


DESCRIPTION


KAWA

SAKI

- KEE

WAY

KTM

- KIM

CO -

LML -

MAS

H


BF11 Specific flange for fitting any of the TANKLOCK, TanklockED bagsonly for EA118 TANKLOCK bag or EA123 TANKLOCK bag




KTM 1290 SUPER ADVENTURE R (17 > 18)SRA7703 Specific rear rack in aluminium for MONOKEY® top-case



PL7705CAM Specific pannier holder for Trekker Outback MONOKEY® CAM-SIDEto be combined with PL7705CAMKIT / 18 mm diameter

PL7705CAMKIT Specific kit to install the PL7705CAM on KTM 1290 Super Adventure S (17 > 18) / 1290 Super Adventure R (17 > 18)











KTM 1290 SUPER ADVENTURE S (17 > 18)SRA7703 Specific rear rack in aluminium for MONOKEY® top-case



PL7705CAM Specific pannier holder for Trekker Outback MONOKEY® CAM-SIDEto be combined with PL7705CAMKIT / 18 mm diameter

PL7705CAMKIT Specific kit to install the PL7705CAM on KTM 1290 Super Adventure S (17 > 18) / 1290 Super Adventure R (17 > 18)











DESCRIPTION



KYMCOKYMCO AGILITY 50-125-150-200 R16 (08 > 13)



441A Specific screen, transparent 72 x 66 cm (H x W)to be combined with the specific A440A fitting kit / 6 cm higher than 440A


KYMCO AGILITY 50-125-150-200 R16+ (14 > 18)SR6106 Specific rear rack for MONOLOCK® top-case





KYMCO DINK 50-125-200I (06 > 16)SR90 Specific rear rack for MONOLOCK® top-case


292DT Specific screen, transparent 67 x 58 cm (H x W)to be combined with the specific D292KIT fitting kit / 37 cm higher the original


KYMCO LIKE 125-150 (17 > 18)SR6109 Specific rear rack for MONOLOCK® top-case


6109A Specific screen, transparent 49,5 x 65,5 cm (H x W)to be combined with the specific A6109A fitting kit


KYMCO LIKE 50-125-200I (09 > 16)6102A Specific screen, transparent 52 x 66,6 cm (H x W)



A442A s Specific fitting kit for 442Aonly available if article 442A is already fitted

KYMCO PEOPLE S 50-125-200 (05 > 15)137A Specific screen, transparent 64 x 71 cm (H x W)




KYMCO PEOPLE GTI 125-200-300 (10 > 18)E139 Specific rear rack for MONOLOCK® top-case


443A Specific screeen, transparent 53 x 72 cm (H x W)to be combined with the specific A443A fitting kit


KYMCO DOWNTOWN 125I-200I-300I (09 > 17)SR92 Specific rear rack for MONOKEY® top-case



D294ST Specific screen, transparent 81.5 x 64 cm (H x W)to be mounted instead of the original screen / 15,5 cm higher than the original


DESCRIPTION


KAWA

SAKI

- KEE

WAY

KTM

- KIM

CO -

LML -

MAS

H

KYMCO DOWNTOWN ABS 125I / 350I (15 > 18)

SR6107Specific rear rack for MONOLOCK® or MONOKEY® top-caseto be combined with the M5 or M7 MONOKEY® plates, or with the M6M MONOLOCK® plate, or with the aluminium bag holder EX2M, or with the plate already included in the MONOLOCK® top-case

D6107ST Specific screen, transparent 92,5 x 63,5 cm (H x W)to be mounted instead of the original screen / 31,5 cm higher than the original


KYMCO GRAND DINK 125-150-250 (00 > 07)SR87M s Specific rear rack for MONOLOCK® top-case



KYMCO G-DINK 125-300 (12 > 17)SR6101 Specific rear rack for MONOLOCK® top-case



KYMCO K-XCT 125I-300I (13 > 17)SR6103 Specific rear rack for MONOKEY® top-case

maximum load allowed 6 kg / MONOKEY® plate included



AF6103 s Specific sliding wind-screen transparent, Airflow. Maximum height 81,5 cm (12 cm of extension), width 57 cmto be mounted instead of the original screen

KYMCO XTOWN 125-300 (16 > 18)

SR6108Specific rear rack, black, for MONOLOCK® or MONOKEY® top-caseto be combined with the M5 or M7 MONOKEY® plate, or with the M5M or M6M MONOLOCK® plate, or with the aluminium bag holder EX2M, or with the plate already included in the MONOLOCK® top-case

D294ST Specific screen, transparent 81.5 x 64 cm (H x W)to be mounted instead of the original screen / 15,5 cm higher than the original


KYMCO XCITING 250-300-500 (05 > 09)SR89M Specific rear rack for MONOLOCK® top-case



KYMCO XCITING R 300I-500I (09 > 14)SR91M Specific rear rack for MONOLOCK® top-case


D295ST Specific screen, transparent 85.5 x 66 cm (H x W)to be mounted instead of the original screen / 25 cm higher than the original

KYMCO G-DINK 300 (18) SR6111 Specific rear rack for MONOLOCK® top-case




KYMCO XCITING 400I (13 > 17)SR6104 Specific rear rack for MONOKEY® top-case



D6104ST Specific screen, transparent, 85 x 63 cm (H x W)to be mounted instead of the original screen / 28 cm higher than the original


KYMCO XCITING S400I (18)


DESCRIPTION


MBK - MOTO GUZZIMOTOMORINI - MV AGUSTA

D6104ST Specific screen, transparent, 85 x 63 cm (H x W)to be combined with the specific D6112KIT fitting kit / to be mounted instead of the original screen / 28 cm higher than the original

D6112KIT Specific fitting kit for D6104ST

KYMCO AK 550 (17 > 18)



D6110S Specific low sports screen smoked 42 x 48,5 cm (H x W)to be mounted instead of the original screen

LMLLML STAR 125-150 (09 > 18)


MASHMASH SEVENTY FIVE 125 (14 > 18)

SR9200 Specific rear rack, black, for MONOLOCK® top-caseto be combined with the plate already included in the MONOLOCK® top-case

PL9200 s Specific pannier holder for MONOKEY® side-casescan only be used to mount cases MONOKEY® E22, DLM30A or DLM30B


MBKMBK OVETTO 50-100 (97 > 02)


MBK OVETTO 50 (08 > 14)SR366 Specific rear rack for MONOLOCK® top-case





MBK BOOSTER 50 (05 > 17)SR356 Specific rear rack for MONOLOCK® top-case


MBK FLIPPER 114 (13 > 17)SR2114 Specific rear rack for MONOLOCK® top-case




MBK TRYPTIK 125 (14 > 17)SR2120 Specific rear rack for MONOLOCK® top-case

to be combined with the plate already included in the MONOLOCK® top-case or with the plate M6M

2120DT Specific screen, transparent, 74 x 63 cm (H x W) to be mounted instead of the original screen / to be combined with the specific D2120KIT fitting kit


DESCRIPTION


MBK

- MOT

O GU

ZZI

MOTO

MORI

NI -

MV AG

USTA


MBK CITYLINER 125 (07 > 12)D439ST Specific screen, transparent with serigraphy 71 x 77 cm (H x W)


MBK FLAME X 125 (07 > 12)SR354 Specific rear rack for MONOLOCK® top-case





MBK SKYCRUISER 125 (05 > 09)SR355 Specific rear rack for MONOKEY® top-case

MONOKEY® plate included / it is necessary to puncture the housing behind the saddle in arranged sections

SR355M Specific rear rack for MONOLOCK® top-caseMONOLOCK® plate included / it is necessary to puncture the housing behind the saddle in arranged sections

D438ST Specific screen, transparent 63,5 x 69,5 cm (H x W)to be mounted instead of the original screen / 25,5 cm higher than original


MBK SKYCRUISER 125 (10 > 12)SR370 Specific rear rack for MONOKEY® top-case

MONOKEY® plate included / it is necessary to puncture the housing behind the saddle / maximum load allowed 6 kg

SR370MSpecific rear rack for MONOLOCK® top-caseto be combined with the plate already included in the MONOLOCK® top-case / it is neccesary to puncture the housing behind the saddle





MBK WAAP 125 (10 > 12)288A Specific screen, transparent 56 x 71,5 cm (H x W)


MBK SKYLINNER S 125 (14)SR2121 Specific rear rack for MONOLOCK® top-case

to be combined with the plate already included in the MONOLOCK® top-case or with the M5M or M6M MONOLOCK® plate



MBK SKYLINER 125-150 CAT. (01 > 13)SR46M Specific rear rack for MONOLOCK® top-case


130DT Specific screen, transparent 69,2 x 68,2 cm (H x W)to be combined with the specific D130KIT fitting kit


MBK OCEO 125-150 (12 > 14)



MBK EVOLYS 125-250 (14 > 17)SR2117 Specific rear rack for MONOKEY® top-case



DESCRIPTION


MBK - MOTO GUZZIMOTOMORINI - MV AGUSTA




MBK SKYLINER 125-250 (14)SR2117 Specific rear rack for MONOKEY® top-case






MBK SKYLINER 250 (00 > 07)SR44 Specific rear rack for MONOKEY® top-case



D127ST Specific screen, transparent 80 x 70,7 cm (H x W)to be mounted instead of the original screen / without moulding steel / without vent hole

MBK KILIBRE 300 (03 > 07)D432ST Specific screen, transparent 72 x 75 cm (H x W)


MBK NITRO (13 > 17)288A Specific screen, transparent 56 x 71,5 cm (H x W)




MBK X-OVER (10)

SR372Specific rear rack for MONOLOCK® top-caseto be combined with the plate already included in the MONOLOCK® top-case / it is necessary to remove the grab rails as they are replaced by the rack itself



MOTO GUZZIMOTO GUZZI BREVA 750 (03 > 12)

703F Specific rear rack for MONOKEY® or MONOLOCK® top-caseto be combined with the plate MONOKEY® M3, or with the plate MONOLOCK® MM / compatible with the original side-case holder

MOTO GUZZI BREVA 850-1100-1200 (05 > 12)SR210 Specific rear rack for MONOKEY® top-case


SR210M Specific rear rack for MONOLOCK® top-caseMONOLOCK® plate included / compatible with the original side-case holder

MOTO GUZZI NORGE 850-1200 (06 > 16)SR210 Specific rear rack for MONOKEY® top-case


SR210M Specific rear rack for MONOLOCK® top-caseMONOLOCK® plate included / compatible with the original side-case holder

MOTO GUZZI STELVIO 1200 (08 > 16)E708 Specific rear rack for MONOKEY® top-case


DESCRIPTION


MBK

- MOT

O GU

ZZI

MOTO

MORI

NI -

MV AG

USTA

D610ST Specific screen, transparent 61 x 46 cm (H x W)compatible from '08 to '10 / to be mounted instead of the original screen / 13 cm higher than the original


MOTO GUZZI V7 (12 > 16)TE8201 Specific holder for Easylock side bags, or soft side bags

MOTO GUZZI V7 III STONE / SPECIAL (17 > 18)

SR8201Specific rear rack, black, for MONOLOCK® or MONOKEY® top-caseto be combined with the E251 MONOKEY® plate (sold separately), or with the plate already included in the MONOLOCK® top-case / maximum load allowed 6 kg

PL8201Specific pannier holder for MONOKEY® side-casesfor version V7 Special it is necessary to remove the original grab handle / can only be used to mount cases MONOKEY® E22, DLM30A or DLM30B

TMT8201 Specific holder for pair of side bags MT501 (Metro-T range)for version V7 Special it is necessary to remove the original grab handle



140A Universal transparent screen 35 x 41 cm (H x W)to be combined with the specific AL8201A fitting kit



A800N Universal smoked screen with finished fiberglass fairingto be combined with the specific A8201A fitting kit

A8201A Specific fitting kit A800N


MOTO GUZZI V9 ROAMER / V9 BOBBER (16 > 18)

SR8202Specific rear rack, black, for MONOLOCK® or MONOKEY® top-caseCompatibility with the V9 Bobber model is to be confirmed / only for version 2016 / to be combined with the E251 MONOKEY® plate (sold separately), or with the plate already included in the MONOLOCK® top-case

PL8202 s Specific pannier holder for MONOKEY®, RETRO FIT side-cases







TS8202B Backrest with detachable small luggage carrier, blackonly for V9 Bobber


DESCRIPTION


PEUGEOT - PIAGGIOROYAL ENFIELD - SUZUKI - SYM

MOTOMORINIMOTOMORINI GRANPASSO 1200 (08 > 18)

D780ST s Specific screen, transparent 53 x 42 cm (H x W)to be mounted instead of the original screen / 10 cm higher than the original

MV AGUSTAMV AGUSTA BRUTALE 750 - 910 - 1078 (> 09)


MV AGUSTA BRUTALE 675-800 (13 > 15)TST9000 s Specific holder for pair of side bags ST604 (Sport-T range)


MV AGUSTA TURISMO VELOCE 800 (15)BF02 Specific flange for fitting any of the TANKLOCK, TanklockED bags

MV AGUSTA F3 675-800BF02 Specific flange for fitting any of the TANKLOCK, TanklockED bags

MV AGUSTA F4 750-1000BF05 Specific flange for fitting any of the TANKLOCK, TanklockED bags

PEUGEOTPEUGEOT TWEET 50-125-150 (10 > 18)

107A Specific screen, transparent 50,8 x 66 cm (H x W) only available if article A299A is already fitted



PEUGEOT BELVILLE 125-200 (17 > 18)107A Specific screen, transparent 50,8 x 66 cm (H x W)




PEUGEOT LXR 125-200 (09 > 16)105A Specific screen, transparent 66 x 67 cm (H x W)




PEUGEOT SV 250 (02)SR140 Specific rear rack for MONOLOCK® or MONOKEY® top-case





DESCRIPTION


PEUG

EOT -

PIAG

GIO

ROYA

L ENF

IELD -

SUZU

KI -

SYM

PIAGGIOPIAGGIO FLY 50-100-125-150 (04 > 17)


107A Specific screen, transparent 50,8 x 66 cm (H x W) to be combined with the specific A110A fitting kit


PIAGGIO NEW FLY 50-125 (12 > 17)

SR5605Specific rear rack for MONOLOCK® top-caseto be combined with the plate already included in the MONOLOCK® top-case / it is necessary to puncture the housing behind the saddle in arranged sections

PIAGGIO TYPHOON 50-125 (11 > 17)SR5602 Specific rear rack for MONOLOCK® top-case



A5602A Specific fitting kit, black for 288A

PIAGGIO LIBERTY 50-125-150-200 (02 > 08) SR5611 Specific rear rack for MONOLOCK® top-case




PIAGGIO LIBERTY S 50-125-200 (06 > 12) SR107 Specific rear rack for MONOLOCK® top-case


PIAGGIO LIBERTY 50-125-150 (09 > 15)SR5611 Specific rear rack for MONOLOCK® top-case




PIAGGIO LIBERTY 50-125-150 I-GET (16 > 18)SR5611 Specific rear rack for MONOLOCK® top-case




PIAGGIO VESPA LX 50-125-150 (05 > 14) SR105 Specific rear rack for MONOLOCK® top-case


104A Specific screen, transparent 51,5 x 69,5 cm (H x W) to be combined with the specific A104A fitting kit


PIAGGIO VESPA PRIMAVERA 50-125-150 (14 > 18)SR5608 Specific rear rack, black, for MONOLOCK® top-case




PIAGGIO VESPA SPRINT 50-125-150 (14 > 18)SR5608 Specific rear rack, black, for MONOLOCK® top-case




DESCRIPTION



PIAGGIO VESPA S 50-125-150 (07 > 14) SR105 Specific rear rack for MONOLOCK® top-case


A354A s Specific fitting kit for 354Aonly available if article 354A is already fitted

PIAGGIO ZIP 50 2T - 4T (13 > 18)6102A Specific screen, transparent 52 x 66,6 cm (H x W)


PIAGGIO ZIP 50-125 (00 > 12)SR56 Specific rear rack for MONOLOCK® or MONOKEY® top-case


6102A Specific screen, transparent 52 x 66,6 cm (H x W)only available if article A5607A is already fitted

PIAGGIO MEDLEY 125-150 (16 > 18)SR5612 Specific rear rack, black, for MONOLOCK® top-case



5612S Specific screen, smoked 22,5 x 44 cm (H x W)to be combined with the specific A5606A fitting kit

A5606A Specific fitting kit for 5612A, 5612S

PIAGGIO BEVERLY 125-200 (01 > 04)E341 Specific rear rack for MONOLOCK® top-case

to be combined with the plate already included in the MONOLOCK® top-case / only for '04 version

PIAGGIO BEVERLY 125-250-400 (04 > 07)E341 Specific rear rack for MONOLOCK® top-case

to be combined with the plate already included in the MONOLOCK® top-case / only for '04 version

E344 Specific rear rack for MONOLOCK® top-caseto be combined with the plate already included in the MONOLOCK® top-case / compatible from model '05

PIAGGIO BEVERLY TOURER 125-250-300-400 (08 > 10)E344 Specific rear rack for MONOLOCK® top-case

compatible from '05 / to be combined with the plate already included in the MONOLOCK® top-case





PIAGGIO BEVERLY 125IE-300IE (10 > 18) / BEVERLY 350 SPORT TOURING (12 > 18)E349 Specific rear rack for MONOLOCK® top-case



5606BLSpecific "ICE" screen, 29 x 45 cm (H x W)to be combined with the specific A357A fitting kit / when illuminated by vehicle headlights in low light conditions, the edge glows blue in colour

5606S Specific smoked screen, 29 x 45 cm (H x W)to be combined with the specific A357A fitting kit

A357A Specific fitting kit for 357A, 5606BL, 5606S

358A Specific screen, transparent 48,5 x 71 cm (H x W)only available if article A358A is already fitted



PIAGGIO MP3 125-250-300-400 (06 > 11)

SR134"Folding" specific rear rack for MONOKEY® top-caseMONOKEY® plate included / complete with polyurethane backrest / Allows hardware to be raised in order to fully open the rear trunk / maximum load allowed 6 kg

SR134M "Folding" specific rear rack for MONOLOCK® top-caseMONOLOCK® plate included / complete with polyurethane backrest / Allows hardware to be raised in order to fully open the rear trunk

D501ST Specific screen, transparent 82 x 64 cm (H x W)to be mounted instead of the original screen / 40 cm higher than the original (06-08 Model) / 24 cm higher than the original ('09-'11 Model)

DESCRIPTION


PEUG

EOT -

PIAG

GIO

ROYA

L ENF

IELD -

SUZU

KI -

SYM

PIAGGIO MP3 YOURBAN 125-300 (11 > 18)SR5600 Specific rear rack for MONOKEY® top-case



5600DT Specific screen, transparent 67 x 74 cm (H x W)to be combined with the specific D5600KIT fitting kit / 35,5 cm higher than the original


AF5600 Specific sliding wind-screen transparent, Airflow. Maximum height 63 cm (12 cm of extension) width 74 cmcomplete with specific fitting kit

D5600ST Specific screen, transparent 57 x 44,5 cm (H x W) to be mounted instead of the original screen / 25,5 cm higher than the original


PIAGGIO VESPA PX 125-150 (11 > 17)SR5603 Specific rear rack for MONOLOCK® top-case




PIAGGIO VESPA 125-200 GRANTURISMO (03 > 08)104A Specific screen, transparent 51,5 x 69,5 cm (H x W)



PIAGGIO VESPA GTS 125-150-300 SUPER (08 > 18)SR131 Specific rear rack for MONOLOCK® top-case


104A Specific screen, transparent 51,5 x 69,5 cm (H x W) to be combined with the specific A104A fitting kit


PIAGGIO X8 125-150-200-250-400 (04 > 10) SR102 Specific rear rack for MONOKEY® top-case




PIAGGIO X9 125-180-250 (00 > 02)SR57 Specific rear rack for MONOLOCK® top-case


PIAGGIO VESPA GTS 125-150-250-300 (06 > 18)104A Specific screen, transparent 51,5 x 69,5 cm (H x W)



PIAGGIO X-EVO 125-250-400 (07 > 11)SR102 Specific rear rack for MONOKEY® top-case




PIAGGIO X10 125-350-500 (12 > 16)D5604ST Specific screen, transparent 85,5 x 69 cm (H x W)


PIAGGIO X9 200-250-500 EVOLUTION (03 > 08) SR57 Specific rear rack for MONOLOCK® top-case



DESCRIPTION



PIAGGIO BEVERLY CRUISER 250-500 (07 > 11)352A Specific screen, transparent with serigraphy 50,5 x 78,5 cm (H x W)



PIAGGIO CARNABY CRUISER 300 (09 > 12)E348 s Specific rear rack for MONOLOCK® top-case


A352A Specific fitting kit for 352A and 356Aonly available if article 356A is already fitted

PIAGGIO MP3 TOURING 300 - 400 (11) / MP3 BUSINESS 500 (12 > 13) / MP3 SPORT 500 (12 > 13) / MP3 300 BUSINESS (12 > 14) / MP3 300 SPORT (12 > 14)

SR134"Folding" specific rear rack for MONOKEY® top-caseMONOKEY® plate included / complete with polyurethane backrest / Allows hardware to be raised in order to fully open the rear trunk / maximum load allowed 6 kg

SR134M "Folding" specific rear rack for MONOLOCK® top-caseMONOLOCK® plate included / complete with polyurethane backrest / Allows hardware to be raised in order to fully open the rear trunk


AF5601 Specific sliding wind-screen transparent, Airflow. Maximum height 67 cm (12 cm of extension) width 65 cmto be mounted instead of the original screen

PIAGGIO MP3 300IE SPORT/BUSINESS (DA AGOSTO 2014 > 17) / MP3 500IE SPORT/BUSINESS (14 > 17)SR5609 Specific rear rack for MONOKEY® top-case





PIAGGIO MP3 350–500 SPORT / BUSINESS (18)


D5613ST Specific screen, transparent, 71,5 x 65 cm (H x W)to be mounted instead of the original screen / 10 cm higher than the original

PIAGGIO BEVERLY 500 (03 > 07) E341 Specific rear rack for MONOLOCK® top-case

to be combined with the plate already included in the MONOLOCK® top-case / compatible with '03 and '04

E344 Specific rear rack for MONOLOCK® top-caseto be combined with the plate already included in the MONOLOCK® top-case / compatible from '05





PIAGGIO X9 500 (01 > 02)SR57 Specific rear rack for MONOLOCK® top-case


ROYAL ENFIELDROYAL ENFIELD HIMALAYAN (18)






DESCRIPTION


PEUG

EOT -

PIAG

GIO

ROYA

L ENF

IELD -

SUZU

KI -

SYM

SUZUKISUZUKI SIXTEEN 125-150 (08 > 16)

169A Specific screen, transparent with serigraphy 56,5 x 71,5 cm (H x W)to be combined with the specific A169A fitting kit


SUZUKI ADDRESS 110 (15 > 18)107A Specific screen, transparent 50,8 x 66 cm (H x W)




SUZUKI UH 125-150 BURGMAN (02 > 06)SR114 Specific rear rack for MONOLOCK® top-case

to be combined with the plate already included in the MONOLOCK® top-case / it is necessary to puncture the housing behind the saddle


SUZUKI BURGMAN 125-200 K7-K8-K9-L0-L1-L2-L3 (06 > 13)SR3106 Specific rear rack for MONOLOCK® top-case





TB3106 Specific backrestit is necessary to puncture the housing behind the saddle

SUZUKI BURGMAN 125-200 ABS (14 > 18)SR3106 Specific rear rack for MONOLOCK® top-case





TB3106 Specific backrestit is necessary to puncture the housing behind the saddle

SUZUKI AN 250-400 BURGMAN (98 > 02)SR111 Specific rear rack for MONOKEY® top-case


SR111M Specific rear rack for MONOLOCK® top-caseMONOLOCK® plate included / it is necessary to puncture the housing behind the saddle



SUZUKI AN 250-400 BUSINESS (01 > 03)156DT Specific screen, transparent 72,5 x 79,5 cm (H x W)

to be combined with the specific D156KIT fitting kit


SUZUKI AN 250-400 BURGMAN (03 > 06)SR115 Specific rear rack for MONOKEY® top-case



SUZUKI TU 250X (97 > 04)A601 Universal screen with 2 point handlebar, bronzè 36,9 x 42,5 cm (H x W)

complete with specific fitting kit

DESCRIPTION



SUZUKI INAZUMA 250 (12 > 16)SR3103 Specific rear rack for MONOLOCK® top-case

to be combined with the plate already included in the MONOLOCK® top-case / it is necessary to puncture the housing behind the saddle

PL3103Specific pannier holder for MONOKEY® side-casesnot compatible with the side-cases in aluminium DLM36 Trekker Dolomiti / it can be mounted only with the specific rear rack SR3103 / can only be used to mount cases MONOKEY® E22, DLM30A or DLM30B

SUZUKI V-STROM 250 (17 > 18)SR3116 Specific rear rack for MONOLOCK® or MONOKEY® top-case






SUZUKI AN 400 BURGMAN TYPE-S (05) D258ST Specific screen, transparent 80 x 71 cm (H x W)


SUZUKI BURGMAN 400 K7-K8-K9-L0-L1-L2-L3-L4-L5-L6 (06 > 16)

SR3115Specific rear rack for MONOLOCK® or MONOKEY® top-caseto be combined with the M5, M8A, M8B, M9A or M9B MONOKEY® plate, or with the M5M or M6M MONOLOCK® plate / if combined with M8A, M8B, M9A, M9B it does not allow the assembly of the stop light kit or the remote control device on the top-case




SUZUKI BURGMAN 400 (17 > 18)

SR3115Specific rear rack for MONOLOCK® or MONOKEY® top-caseto be combined with the M5, M7, M8A, M8B, M9A or M9B MONOKEY® plate, or with the M5M or M6M MONOLOCK® plate / if combined with M8A, M8B, M9A, M9B it does not allow the assembly of the stop light kit or the remote control device on the top-case


D3115S Specific low sports screen smoked 41 x 43 cm (H x W)to be mounted instead of the original screen

AF3115 Specific sliding wind-screen transparent, Airflow. Maximum height 77 cm (12 cm of extension) width 67 cmto be mounted instead of the original screen / 23 cm higher than the original



SUZUKI GS 500 E (01 > 07) / GS 500 F (04)526F Specific rear rack for MONOKEY® or MONOLOCK® top-case


SUZUKI GSF 600 BANDIT / S (96 > 99)511F Specific rear rack for MONOKEY® or MONOLOCK® top-case



SUZUKI GSF 600 BANDIT / S (00 > 04)522F Specific rear rack for MONOKEY® or MONOLOCK® top-case



SUZUKI GSR 600 (06 > 11) SR116 Specific rear rack for MONOKEY® top-case

MONOKEY® plate included/ it is necessary to remove the grabrails / maximum load allowed 6 kg

SR116M Specific rear rack for MONOLOCK® top-caseMONOLOCK® plate included / it is necessary to remove the grabrails

PLX538 Specific pannier holder for V35, V37 MONOKEY® SIDE casesit can be mounted only with the specific rear rack SR116 / SR116M

DESCRIPTION


PEUG

EOT -

PIAG

GIO

ROYA

L ENF

IELD -

SUZU

KI -

SYM


T255 Specific holder for soft side bagsto be mounted only with SR116 / SR116M

245A Universal screen, smoked 33,5 x 29 cm (H x W)only for '06-'07 / to be combined with the specific A167A fitting kit

245N Universal screen, black 33,5 x 29 cm (H x W)only for '06-'07 / to be combined with the specific A167A fitting kit

A167A Specific fitting kit for 245N, 245Aonly for '06-'07 it requires the fitting of 245N painted black internally so as not to reflect the light

247A Universal screen, smoked 29 x 28,5 cm (H x W)only for '08-'11 / to be combined with the specific A170A fitting kit

247N Specific screen, black 29 x 28,5 cm (H x W)only for '08-'11 / to be combined with the specific A170A fitting kit

A170A Specific fitting kit for 247A and 247Nonly for '08-'11


SUZUKI GSX 600 F (98 > 02)518F Specific rear rack for MONOKEY® or MONOLOCK® top-case


SUZUKI GSX 600 F (03 > 06)


SUZUKI GSX R 600 / 750 (06 > 10)BF01 Specific flange for fitting any of the TANKLOCK, TanklockED bags

SUZUKI AN 650 BURGMAN EXECUTIVE (02 > 12)SR3104 Specific rear rack for MONOKEY® top-case


SR3104MMSpecific rear rack for MONOLOCK® top-caseM6M MONOLOCK® plate with space for a "u" type padlock included / it is necessary to puncture the housing behind the saddle in arranged sections

D257ST Specific screen, transparent 80 x 72 cm (H x W)compatible with '02-'04 / to be mounted instead of the original screen

D263ST Specific screen, transparent 78,5 x 72 cm (H x W)compatible from '05 / to be mounted instead of the original screen / for models having electrically adjustable screen

SUZUKI BURGMAN 650 / 650 EXECUTIVE (13 > 18)SR3104 Specific rear rack for MONOKEY® top-case


SR3104MMSpecific rear rack for MONOLOCK® top-caseM6M MONOLOCK® plate with space for a "u" type padlock included / it is necessary to puncture the housing behind the saddle in arranged sections

SR3104KIT Specific kit to install the specific rear rack SR3104 / SR3104MM on Burgman 650 Executiveit is necessary to remove the original backrest


D3104ST Specific screen, trasparent, 76 x7 5 cm (H x W)to be mounted instead of the original screen / 12 cm higher than the original

SUZUKI DL 650 V-STROM (04 > 11) E528 Specific rear rack for MONOKEY® top-case







D260ST Specific screen, transparent 57 x 48 cm (H x W)compatible with models from '04 / to be mounted instead of the original screen / 18 cm higher than the original


DESCRIPTION







SUZUKI DL 650 V-STROM L2-L3-L4-L5-L6 (11 > 16)SR3101 Specific rear rack for MONOKEY® top-case



SRA3101 Specific rear rack, black, in aluminium for MONOKEY® top-casemaximum load allowed 6kg / it does not allow the assembly of the stop light kit or the remote control device on the top-case








TN3101Specific engine guard25 mm diameter steel tube / we recommend fitting by a qualified mechanic / Compatible with the original oil carter, as well as the oil carter protector RP3101


MG3101 s Specific ABS mudguard, black colour




SUZUKI DL 650 V-STROM (17 > 18)SRA3112 Specific rear rack in aluminium for MONOKEY® top-case







TL3112KIT Specific kit to install the S250 Tool Box on PL3112, PL3112CAMto be combined with S250 and PL3112 or PL3112CAM / needs to mounted on the left-hand side of the motorcycle



D3112B Specific screen, smoked 30 x 42 cm (H x W)to be mounted instead of the original screen


TN3101Specific engine guard25 mm diameter steel tube / we recommend fitting by a qualified mechanic / Compatible with the original oil carter, as well as the oil carter protector RP3101



DESCRIPTION


PEUG

EOT -

PIAG

GIO

ROYA

L ENF

IELD -

SUZU

KI -

SYM




FB3112Fairing upper bracket to be mounted behind the windshield to install S902A, S920M, S920L and GPS-Smartphone holderFor S902A, S920M, S920L, S952B, S953B, S954B, S955B, S956B, S957B


SUZUKI GLADIUS 650 (09 > 16)

SR121Specific rear rack for MONOKEY® top-caseMONOKEY® plate included / it is necessary to remove the grabrails as they are reproduced by the rack itself / maximum load allowed 6 kg

SR121M Specific rear rack for MONOLOCK® top-caseMONOLOCK® plate included / it is necessary to remove the grabrails as they are reproduced by the rack itself



A172 Specific screen, smoked 29,5 x 30,5 cm (H x W)complete with specific fitting kit


SUZUKI GSF 650 BANDIT / BANDIT S / BANDIT ABS (05 > 06)


D262S Specific screen, smoked 45,7 x 36,5 cm (H x W)for semi faired version / to be mounted instead of the original screen / 11,7 cm higher than the original

05SKITSpecific kit to mount the S900A Smart Bar or the S901A Smart Mountcompatible with versions N / S / NA / SA (05> 08)The S901A is compatible with the supports SGZ39SM (for Garmin Zumo 345LM / 390LM/395LM/590LM/595LM) and STTR40SM (for Tom Tom Rider 40/400/410/42/420/450/500/550)

SUZUKI GSF 650 BANDIT / GSF 650 BANDIT S K7-K8 (07 > 11)



PLX539 Specific pannier holder for V35, V37 MONOKEY® SIDE casesit is necessary to move the indicators from their original position

D262SSpecific screen, smoked 45,7 x 36,5 cm (H x W)IMPORTANT: since 2009 in some countries the model Bandit K9 is available while in some other countries is still sold as the previous model K7-K8to be mounted instead of the original screen / 11,7 cm higher than the original

IMPORTANT: SINCE 2009 IN SOME COUNTRIES THE MODEL BANDIT K9 IS AVAILABLE WHILE IN SOME OTHER COUNTRIES IS STILL SOLD AS THE PREVIOUS MODEL K7-K8

SUZUKI GSF 650 BANDIT / GSF 650 BANDIT S K9-L0-L1-L2-L3-L4 (09 > 15)




IMPORTANT: SINCE 2009 IN SOME COUNTRIES THE MODEL BANDIT K9 IS AVAILABLE WHILE IN SOME OTHER COUNTRIES IS STILL SOLD AS THE PREVIOUS MODEL K7-K8

SUZUKI GSX 650F (08 > 14) / GSX 1250F (10 > 16)







DESCRIPTION



SUZUKI SV 650 / SV 650 S (03 > 08)



SUZUKI SV 650 (16 > 18)




A3111 Specific screen, smoked 28,5 x 36 cm (H x L)complete with specific fitting kit



SUZUKI GSX 750 (98 > 02)517F Specific rear rack for MONOKEY® or MONOLOCK® top-case



SUZUKI GSX 750 F (98 > 02)518F Specific rear rack for MONOKEY® or MONOLOCK® top-case


SUZUKI GSX 750 F (03 > 06)


SUZUKI GSX S750 (17 > 18)







HP3113 s Specific hand protectors in ABS


SUZUKI GSR 750 (11 > 16)

3100FZSpecific rear rack for MONOKEY® or MONOLOCK® top-caseto be combined with the MONOKEY® M5, M7, M8A, M8B, M9A or M9B plates, or with the MONOLOCK® M5M or M6M plates / if combined with M8A, M8B, M9A, M9B it does not allow the assembly of the stop light kit or the remote control device on the top-case


TE3100 sSpecific holder for Easylock side bags, or soft side bagsit can be mounted without the specific rear rack 3100FZ using the 3100KIT / it is necessary to move the indicators from their original position



SUZUKI DL 1000 V-STROM (02 > 11)E528 Specific rear rack for MONOKEY® top-case



DESCRIPTION


PEUG

EOT -

PIAG

GIO

ROYA

L ENF

IELD -

SUZU

KI -

SYM




D255ST Specific screen, transparent 60 x 37,5 cm (H x W)compatible from '02 to '03 / to be mounted instead of the original screen / only with spoiler / 16 cm higher than the original

D260ST Specific screen, transparent 57 x 48 cm (H x W)compatible from year '04 / compatible with models from '04 / to be mounted instead of the original screen / 18 cm higher than the original

AF260 Specific sliding wind-screen transparent, Airflow. Maximum height 65 cm (12 cm of extension) width 44 cmcompatible from year '04 / complete with specific fitting kit / to be mounted instead of the original screen




SR3105 Specific rear rack for MONOKEY® top-caseMONOKEY® plate included / maximum load allowed 6 kg



















TL3112KIT Specific kit to install the S250 Tool Box on PLR3105to be combined with S250 and PLR3105 / needs to mounted on the left-hand side of the motorcycle


TL3114KIT Specific kit to install the S250 Tool Box on PL3105CAMto be combined with S250 and PL3105CAM / needs to mounted on the left-hand side of the motorcycle


BF18 Specific flange for fitting any of the TANKLOCK bags



DESCRIPTION














SUZUKI SV 1000 / SV 1000 S (03 > 08)



SUZUKI GSX S1000F / GSX S1000 (15 > 18)





D3110ST Specific screen, transparent 59 x 35 cm (H x W)only for version GSX S1000F / to be mounted instead of the original screen / 15 cm higher than the original


SUZUKI GSX 1200 (98 > 02)517F Specific rear rack for MONOKEY® or MONOLOCK® top-case


SUZUKI GSF 1200 BANDIT (96 > 99)511F Specific rear rack for MONOKEY® or MONOLOCK® top-case


SUZUKI GSF 1200 BANDIT / BANDIT S (00 > 05)522F Specific rear rack for MONOKEY® or MONOLOCK® top-case


SUZUKI GSF 1200 BANDIT / BANDIT S (06)


D262S Specific screen, smoked 45,7 x 36,5 cm (H x W)to be mounted instead of the original screen / 11,7 cm higher than the original

SUZUKI GSF 1250 BANDIT / BANDIT S (07 > 11)




DESCRIPTION


PEUG

EOT -

PIAG

GIO

ROYA

L ENF

IELD -

SUZU

KI -

SYM

D262S Specific screen, smoked 45,7 x 36,5 cm (H x W)for GSF 1250 Bandit S / to be mounted instead of the original screen / 11,7 cm higher than the original


SUZUKI GSX 1300R HAYABUSA (08 > 16)

541FZ

Specific rear rack for MONOKEY® or MONOLOCK® top-caseto be combined with the MONOKEY® M5, M7, M8A, M8B, M9A or M9B plates, or with the MONOLOCK® M5M or M6M plates, or with the aluminium bag holder EX2M / if combined with M8A, M8B, M9A, M9B it does not allow the assembly of the stop light kit or the remote control device on the top-case / as a larger grab rail for the passenger is included it is necessary to remove the original grab rails / maximum load allowed 6 Kg


SUZUKI GSX 1400 (02 > 09)


SYMSYM FIDDLE II 50-125 (09 > 14)



SYM SYMPHONY S 50-125-151 (09 > 18) / SYMPHONY S 50-125-150 (09 > 15)107A Specific screen, transparent 50,8 x 66 cm (H x W)


7053A Specific screen, transparent with serigraphy, 52,5 x 76 cm (H x W)to be combined with the specific A7053A fitting kit


SYM SYMPHONY SR 50-125-151 (10 > 16)297A Specific screen, transparent 62 x 71 cm (H x W)



SYM SYMPHONY ST 50-125-200 (15 > 18)SR7054 Specific rear rack for MONOLOCK® top-case


7054A Specific screen, transparent 49 x 66 cm (H x W) to be combined with the specific A7054A fitting kit


SYM JET 14 125-200 (17 > 18)SR7055 Specific rear rack for MONOLOCK® top-case


SYM JOYRIDE EVO 125-200 (09 > 18)SR233 s Specific rear rack for MONOKEY® top-case


SR233M s Specific rear rack for MONOLOCK® top-caseto be combined with the plate already included in the MONOLOCK® top-case

D651ST Specific screen, transparent 62 x 60 cm (H x W)to be mounted instead of the original screen / 15,5 cm cm higher than the original

SYM HD EVO 125-200 (07 > 16)105A Specific screen, transparent 66 x 67 cm (H x W)




DESCRIPTION


TRIUMPH - YAMAHAZERO MOTORCYCLES

SYM HD2 125-200 (11 > 16)128A Specific screen, transparent 74 x 67 cm (H x W)

to be combined with the specific A7050A fitting kit / 8 cm higher than 105A



SYM JOYMAX 250 (05 > 08) / JOYMAX EVO (09 > 11) / GTS (11 > 12)SR230 Specific rear rack for MONOLOCK® or MONOKEY® top-case



SYM CITYCOM 300 (08 > 18)SR231M Specific rear rack for MONOLOCK® top-case

MONOLOCK® plate included / it is necessary to puncture the housing behind the saddle in arranged sections


SYM JOYMAX 300I (12 > 18)SR7052 Specific rear rack for MONOKEY® top-case



D7052ST Specific screen, transparent with handguards 82 x 59 cm (H x W)to be mounted instead of the original screen / 16,5 cm higher than the original

SYM CRUISYM 300 (17 > 18)

SR7056Specific rear rack for MONOLOCK® or MONOKEY® top-caseto be combined with the M5, M8A, M8B, M9A or M9B MONOKEY® plate, or with the M5M or M6M MONOLOCK® plate, or with the aluminium bag holder EX2M, or with the plate already included in the MONOLOCK® top-case / if combined with M8A, M8B, M9A, M9B it does not allow the assembly of the stop light kit or the remote control device on the top-case / maximum load allowed 6 kg

7056DT Specific screen, transparent 78 x 70,5 cm (H x W)to be combined with the specific D7056KIT fitting kit / 21 cm higher than the original


TB7056 Specific backrestit cannot be mounted with Monorack SR7056

SYM MAXSYM 400-600 (11 > 18)SR7051 Specific rear rack for MONOKEY® top-case



7051DT Specific screen, transparent 74 x 64 cm (H x W) to be combined with the specific D7051KIT fitting kit / 12 cm higher than the original


TRIUMPHTRIUMPH STREET TRIPLE 675 (07 > 12)




247N Specific screen, black 29 x 28,5 cm (H x W)only available if article A221A is already fitted

TN226 s Specific engine guard, chromed25 mm diameter steel tube / we recommend fitting by a qualified mechanic

TRIUMPH STREET TRIPLE 675 (13 > 16)BF02 Specific flange for fitting any of the TANKLOCK, TanklockED bags


DESCRIPTION


TRIU

MPH

- YAM

AHA

ZERO

MOT

ORCY

CLES

TRIUMPH STREET TRIPLE 765 (17 > 18)


TST6412 Specific holder for pair of side bags ST604 (Sport-T range)






05SKITSpecific kit to mount the S900A Smart Bar or the S901A Smart Mountfor S / R / RS version / The S901A is compatible with the supports SGZ39SM (for Garmin Zumo 345LM / 390LM/395LM/590LM/595LM) and STTR40SM (for Tom Tom Rider 40/400/410/42/420/450/500/550)

TRIUMPH BONNEVILLE 865SR226 Specific rear chromed rack for MONOLOCK® or MONOKEY® top-case




140A Universal transparent screen 35 x 41cm (H x W) to be combined with the specific AL6406A fitting kit

140S Universal smoked screen 35 x 41cm (H x W) to be combined with the specific AL6406A fitting kit

AL6406A s Specific fitting kit for 100AL, 100ALB, 140A, 140Sonly compatible with Bonneville 865 T100

TRIUMPH TIGER 800 / 800 XC / 800 XR (11 > 17)SR6401 Specific rear rack for MONOKEY® top-case

MONOKEY® plate included / maximum load allowed 6 kg / it is necessary to puncture the housing behind the saddle

SRA6401Specific rear rack in aluminium for MONOKEY® top-casemaximum load allowed 6kg / it does not allow the assembly of the stop light kit or the remote control device on the top-case / it is necessary to puncture the housing in arranged sections






6401DTSpecific screen, transparent 53 x 46,5 cm (H x W)not compatible on version with a height adjustable windshield / to be combined with the specific D6401KIT fitting kit / 17 cm higher than the original

D6401KIT Specific fitting kit for 6401DTnot compatible on version with a height adjustable windshield

AF6401 Specific sliding wind-screen transparent, Airflow. Maximum height 60,5 cm (12 cm of extension) width 45,5 cmnot compatible on version with a height adjustable windshield / complete with specific fitting kit / to be mounted instead of the original screen

TN6409 Specific engine guard, black2011 version only combined with the item TN6401AKIT / 25 mm diameter steel tube / we recommend fitting by a qualified mechanic

TN6401AKIT Specific kit to install the engine guards TN6401A / TN6409 on Tiger 800 / Tiger 800 XC / Tiger XR (11)


EH6401 Extension in smoked plexiglass for original hand protectorsonly for version 11 > 14

ES6401 Specific support in aluminium and stainless steel to widen the surface support area of the original side standit is not compatible with centre stand


DESCRIPTION



TRIUMPH TIGER 800 XC / 800 XR (18) SR6401 Specific rear rack for MONOKEY® top-case

MONOKEY® plate included / maximum load allowed 6 kg / it is necessary to puncture the housing behind the saddle

SRA6401Specific rear rack in aluminium for MONOKEY® top-casemaximum load allowed 6kg / it does not allow the assembly of the stop light kit or the remote control device on the top-case / it is necessary to puncture the housing in arranged sections










LS6413 Specific fitting kit to mount S310, S321 or S322 spotlightsonly for Tiger 800 XC


TRIUMPH STREET TWIN 900 (16 > 18)

SR6407Specific rear rack, black, for MONOLOCK® or MONOKEY® top-caseto be combined with the E251 MONOKEY® plate (sold separately), or with the plate already included in the MONOLOCK® top-case /maximum load allowed 6 kg





140S Universal smoked screen 35 x 41 cm (H x W)to be combined with the specific AL6407A fitting kit




TRIUMPH STREET SCRAMBLER 900 (17 > 18)


TRIUMPH BONNEVILLE T100 (17 > 18)


PL6410 Specific pannier holder for MONOKEY®, RETRO FIT side-casescan only be mounted with the SR6410






AL6410A s Specific fitting kit for 100AL, 100ALB, 140A, 140S


DESCRIPTION


TRIU

MPH

- YAM

AHA

ZERO

MOT

ORCY

CLES

TRIUMPH TIGER 1050 (07 > 12)SR225 Specific rear rack for MONOKEY® top-case

MONOKEY® plate included / maximum load allowed 6 Kg / it is not compatible with the original side-case holder

PL727 Specific pannier holder for MONOKEY®, RETRO FIT side-casesit can be mounted only with the specific rear rack SR225




TRIUMPH ST 1050 SPRINT (05 > 11)

726FZSpecific rear rack for MONOKEY® or MONOLOCK® top-caseto be combined with the MONOKEY® M5, M7, M8A, M8B, M9A or M9B plates, or with the MONOLOCK® M5M or M6M plates, or with the aluminium bag holder EX2M / if combined with M8A, M8B,M9A, M9B it does not allow the assembly of the stop light kit or the remote control device on the top-case


TRIUMPH SPEED TRIPLE 1050 (08 > 10)BF02 Specific flange for fitting any of the TANKLOCK, TanklockED bags

TRIUMPH SPEED TRIPLE 1050 (11 > 15)BF02 Specific flange for fitting any of the TANKLOCK, TanklockED bags



TRIUMPH SPEED TRIPLE 1050 (16 > 17)TST6411 Specific holder for pair of side bags ST604 (Sport-T range)



TRIUMPH SPRINT GT 1050 (10 > 16)BF02 Specific flange for fitting any of the TANKLOCK, TanklockED bags

TRIUMPH TIGER SPORT 1050 (13 > 18)SR6404 Specific rear rack for MONOKEY® top-case

MONOKEY® plate included / it is not compatible with the original side-case holder

PLR6404 Specific rapid release side-case holder for MONOKEY®, RETRO FIT casesit can be mounted only with the specific rear rack SR6404


D225ST Specific screen, transparent 50,5 x 49,3 cm (H x W)only for version 13 > 15 / to be mounted instead of the original screen / 12,5 cm higher than the original


TRIUMPH TIGER EXPLORER 1200 (12 > 15)SR6403 Specific rear rack for MONOKEY® top-case



PLR6403 Specific rapid release side-case holder for MONOKEY® casesnot compatible with the side-cases in aluminium DLM36 Trekker Dolomiti






DESCRIPTION



01SKITSpecific kit to mount the S900A Smart Bar or the S901A Smart Mountalso compatible with versions XC and XC SEThe S901A is compatible with the supports SGZ39SM (for Garmin Zumo 345LM / 390LM/395LM/590LM/595LM) and STTR40SM (for Tom Tom Rider 40/400/410/42/420/450/500/550)

TRIUMPH TIGER EXPLORER 1200 (16 > 17)SR6403 Specific rear rack for MONOKEY® top-case



PLR6408 Specific rapid release side-case holder for MONOKEY® casesnot compatible with the side-cases in aluminium DLM36 Trekker Dolomiti and with GRT709 Unifit






TRIUMPH TIGER 1200 (18) SR6403 Specific rear rack for MONOKEY® top-case



PLR6408 Specific rapid release side-case holder for MONOKEY® casesnot compatible with the side-cases in aluminium DLM36 Trekker Dolomiti and with GRT709 Unifit






TRIUMPH BONNEVILLE T120 (16 > 18)



TMT6410 Specific holder for pair of side bags MT501 (Metro-T range)it is not compatible with the specific rear rack SR6410





AL6410A s Specific fitting kit for 100AL, 100ALB, 140A, 140S


DESCRIPTION


TRIU

MPH

- YAM

AHA

ZERO

MOT

ORCY

CLES

YAMAHAYAMAHA AEROX R 50 (13 > 18)




YAMAHA BW'S 50 (05 > 17)SR356 Specific rear rack for MONOLOCK® top-case


YAMAHA NEO'S 50-100 (97 > 02)SR86 Specific rear rack for MONOLOCK® top-case


YAMAHA NEO'S 50 (08 > 18)SR366 Specific rear rack for MONOLOCK® top-case





YAMAHA D'ELIGHT 114 (13 > 16)SR2114 Specific rear rack for MONOLOCK® top-case




YAMAHA D’ELIGHT 125 (17 > 18)SR2134 Specific rear rack, black, for MONOLOCK® top-case




YAMAHA BW'S 125 (10 > 16)

SR372Specific rear rack for MONOLOCK® top-caseto be combined with the plate already included in the MONOLOCK® top-case / it is necessary to remove the grab rails as they are replaced by the rack itself



YAMAHA CIGNUS X 125 (04 > 06) SR354 Specific rear rack for MONOLOCK® top-case


YAMAHA CIGNUS X 125 (07 > 15)SR354 Specific rear rack for MONOLOCK® top-case





YAMAHA MAJESTY 125-150-180 (01 > 11)SR46M Specific rear rack for MONOLOCK® top-case




DESCRIPTION



YAMAHA MAJESTY S 125 (14 > 17)SR2121 Specific rear rack for MONOLOCK® top-case

to be combined with the plate already included in the MONOLOCK® top-case or with the M5M or M6M MONOLOCK® plate



YAMAHA TRICITY 125-155 (14 > 18)SR2120 Specific rear rack for MONOLOCK® top-case

to be combined with the plate already included in the MONOLOCK® top-case or with the plate M6M

2120DT Specific screen, transparent, 74 x 63 cm (H x W) to be mounted instead of the original screen / to be combined with the specific D2120KIT fitting kit



YAMAHA VITY 125 (10 > 15)288A Specific screen, transparent 56 x 71,5 cm (H x W)


YAMAHA N-MAX 125 (15 > 18)SR2123 Specific rear rack for MONOLOCK® top-case


2123DT Specific screen, transparent 81,5 x 64,5 cm (H x W)to be mounted instead of the original screen / to be combined with the specific D2123KIT fitting kit



YAMAHA X-CITY 125-250 (07 > 17)D439ST Specific screen, transparent with serigraphy 71 x 77 cm (H x W)


YAMAHA XENTER 125-150 (12 > 18)



YAMAHA X-MAX 125-250 (05 > 09) SR355 Specific rear rack for MONOKEY® top-case


SR355M Specific rear rack for MONOLOCK® top-caseMONOLOCK® plate included / it is necessary to puncture the housing behind the saddle in arranged sections

D438ST Specific screen, transparent 63,5 x 69,5 cm (H x W)to be mounted instead of the original screen / 25,5 cm higher than original


YAMAHA X-MAX 125-250 (10 > 13) SR370 Specific rear rack for MONOKEY® top-case


SR370MSpecific rear rack for MONOLOCK® top-caseto be combined with the plate already included in the MONOLOCK® top-case / it is neccesary to puncture the housing behind the saddle





YAMAHA X-MAX 125-250 (14 > 17)SR2117 Specific rear rack for MONOKEY® top-case



DESCRIPTION


TRIU

MPH

- YAM

AHA

ZERO

MOT

ORCY

CLES




YAMAHA X-MAX 125 (18)

SR2136Specific rear rack for MONOLOCK® or MONOKEY® top-caseto be combined with the M5, M7, M8A, M8B, M9A or M9B MONOKEY® plate, or with the M5M or M6M MONOLOCK® plate, or with the aluminium bag holder EX2M / if combined with M9A, M9B it does not allow the assembly of the stop light kit or the remote control device on the top-case / maximum load allowed 6 kg


D2136S Specific low sports screen smoked 43,5 x 43,5 cm (H x W)to be mounted instead of the original screen

D2138S Specific screen, smoked 64,5 x 57,5 cm (H x W) to be mounted instead of the original screen / 11,5 cm higher than the original


YAMAHA XT 125 R/X (05 > 12) E332 s Specific rear rack for MONOLOCK® top-case


YAMAHA YBR 125 (10 > 14)SR2104 Specific rear rack for MONOLOCK® top-case


YAMAHA MAJESTY 250 (00 > 07)SR44 Specific rear rack for MONOKEY® top-case



D127ST Specific screen, transparent 80 x 70,7 cm (H x W)to be mounted instead of the original screen / without moulding steel / without vent hole

YAMAHA WR250R (08 > 13)


YAMAHA XC 300 VERSITY (03 > 07) D432ST Specific screen, transparent 72 x 75 cm (H x W)


YAMAHA X-MAX 300 (17 > 18)






YAMAHA MT-03 321 (16 > 18)SR2127 Specific rear rack for MONOLOCK® top-case





YAMAHA MAJESTY 400 (04 > 08)E331 Specific rear rack for MONOKEY® top-case




DESCRIPTION



YAMAHA MAJESTY 400 (09 > 14)E331 Specific rear rack for MONOKEY® top-case



445DT Specific screen, transparent 86 x 66 cm (H x W)to be combined with the specific D445KIT fitting kit / 22,5 cm higher than the original

YAMAHA X-MAX 400 (13 > 16)SR2111 Specific rear rack for MONOKEY® top-case






YAMAHA X-MAX 400 (18)






YAMAHA T-MAX 500 (01 > 07)SR45 Specific rear rack for MONOKEY® top-case



D128B Specific low sports screen gloss black 52 x 44,5 cm (H x W)to be mounted instead of the original screen

TB45 Specific backrest



MONOKEY® plate included / maximum load allowed 6 Kg / it is necessary to puncture the housing behind the saddle


T2013 Specific holder for soft side bagsit is not compatible with the specific rear rack SR2013 / SR2013M

D442B Specific low sports screen gloss black 59 x 45 cm (H x W)including two rubber blanking stoppers for those who wish to move the screen from its original position




MONOKEY® plate included / maximum load allowed 6 Kg / it is necessary to puncture the housing behind the saddle


T2013 Specific holder for soft side bagsit is not compatible with the specific rear rack SR2013 / SR2013M



D2013BO Specific low sports screen, gloss and matt black 46 x 48 cm (H x W)To be mounted instead of the original screen


DESCRIPTION


TRIU

MPH

- YAM

AHA

ZERO

MOT

ORCY

CLES

YAMAHA T-MAX 530 (17 > 18)


TE2133 Specific holder for Easylock side bags, or soft side bagsto be mounted only with SR2133


D2013BO Specific low sports screen, gloss and matt black 46 x 48 cm (H x W)not compatible on version with a height adjustable windshield / To be mounted instead of the original screen



01VKIT Specific kit to mount the Smart Mount RC S903Ait can be mounted on the brake fluid reservoir cover either on the right-hand side or left-hand side

YAMAHA FZS 600 FAZER (98 > 03)340F Specific rear rack for MONOKEY® or MONOLOCK® top-case


YAMAHA FZ6/FZ6 600 FAZER (04 > 06)


PL351 Specific pannier holder for MONOKEY®, RETRO FIT side-casesit can be mounted without the specific rear rack 351FZ using the 351KIT / it is necessary to move the indicators from their original position

351KIT Specific kit to install the PL351 / T351 without the specific rear rack 351FZ

PLX351Specific pannier holder for V35 MONOKEY® SIDE casesit can be mounted only with the specific rear rack 351FZ / it is necessary to move the indicators from their original position / only compatible with V35 MONOKEY® SIDE

T351 Specific holder for soft side bagsit can be mounted without the specific rear rack 351FZ using the 351KIT


D136ST Specific screen, transparent 61 x 53,5 cm (H x W)for FZ6 Fazer version / to be mounted instead of the original screen / 12,5 cm higher than the original

140D Specific screen, smoked 35 x 36cm (H x W)only for FZ6 / to be combined with the specific D140KIT fitting kit

D140KIT Specific fitting kit for 140Donly for FZ6 /

TN358 Specific engine guard25 mm diameter steel tube / we recommend fitting by a qualified mechanic / mount with original central stand mounted

YAMAHA FZ6 S2 / FZ6 600 FAZER S2 (07 > 11)


PL360 Specific pannier holder for MONOKEY®, RETRO FIT side-casesit can be mounted without the specific rear rack 351FZ using the 351KIT / it is necessary to move the indicators from their original position

PLX360Specific pannier holder for V35 MONOKEY® SIDE casesit can be mounted without the specific rear rack 351FZ using the 351KIT / it is necessary to move the indicators from their original position / only compatible with V35 MONOKEY® SIDE

351KIT Specific kit to install the PL360 / PLX360 / TE351 without the specific rear rack 351FZ



440D Specific screen, smoked 57 x 57 cm (H x W)for FZ6 Fazer S2 version / to be combined with the specific D440KIT fitting kit / 19 cm higher than the original

TN358 Specific engine guard25 mm diameter steel tube / we recommend fitting by a qualified mechanic / mount with original central stand mounted


YAMAHA XJ 600 DIVERSION (91 > 95)325F Specific rear rack for MONOKEY® or MONOLOCK® top-case


DESCRIPTION






YAMAHA XJ 600 DIVERSION N (96 > 99)325F Specific rear rack for MONOKEY® or MONOLOCK® top-case


YAMAHA XJ6 (09>12) / XJ6 DIVERSION / XJ6 DIVERSION F 600 (09 > 13)






A286 Specific screen, smoked 28 x 30 cm (H x W)only for XJ6 / complete with specific fitting kit

D444S s Specific screen, smoked 42.5 x 38 cm (H x W)only for XJ6 Diversion / to be mounted instead of the original screen / 10 cm higher than the original


YAMAHA XJ6 600 (13 > 15)








YAMAHA MT-03 660 (06 > 14)

356FZSpecific rear rack for MONOKEY® or MONOLOCK® top-caseto be combined with the MONOKEY® M5, M7, M8A, M8B, M9A or M9B plates, or with the MONOLOCK® M5M or M6M plates, or with the aluminium bag holder EX2M / if combined with M8A, M8B, M9A, M9B it does not allow the assembly of the stop light kit or the remote control device on the top-case / maximum load allowed 6 Kg / with integrated passenger grabrails



245A Universal screen, smoked 33,5 x 29 cm (H x W)to be combined with the specific A281A fitting kit

245N Universal screen black 33,5 x 29 cm (H x W)

A281A Specific fitting kit for 245A, 245N, 246_ _ _

YAMAHA YZF 600 THUNDER CAT (96 > 02)338F Specific rear rack for MONOKEY® or MONOLOCK® top-case


YAMAHA YZF 600 R6 (06 > 07)BF05 Specific flange for fitting any of the TANKLOCK, TanklockED bags

YAMAHA XVS 650 DRAG STAR (97 > 02)A35N Universal screen, 54,9 x 46,8 cm (H x W)

to be combined with the specific AS100A2 fitting kit / high and shaded bottom version

DESCRIPTION


TRIU

MPH

- YAM

AHA

ZERO

MOT

ORCY

CLES

A23 Universal screen, 38,8 x 41 cm (H x W)to be combined with the specific AS100A2 fitting kit / low, transparent version


YAMAHA XVS 650A DRAG STAR CLASSIC (98 > 07)A39 Universal screen, transparent 51,7 x 57,3 cm (H x W)

only available if article AS102A2 is already fitted

YAMAHA XT 660 R / XT 660 X (04 > 06)SR353M Specific rear rack for MONOLOCK® top-case



YAMAHA XT 660 R / XT 660 X (07 > 16)SR365M Specific rear rack for MONOLOCK® top-case


D433S Specific screen, smoked 37 x 36,5 cm (H x W)only for XT 660 R version / to be mounted instead of the original screen

YAMAHA XT 660Z TENERÉ (08 > 16)E333 Specific rear rack for MONOKEY® top-case



PL2105CAM s Specific pannier holder for Trekker Outback MONOKEY® CAM-SIDE18 mm diameter




RP2105 s Oil carter protector in Aluminium

YAMAHA MT-07 (14 > 17)

2118FZSpecific rear rack for MONOKEY® or MONOLOCK® top-caseto be combined with the MONOKEY® M5, M7, M8A, M8B, M9A or M9B plates, or with the MONOLOCK® M5M or M6M plates, or with the aluminium bag holder EX2M / if combined with M8A, M8B, M9A, M9B it does not allow the assembly of the stop light kit or the remote control device on the top-case / it is necessary to puncture the housing under the tail

PLX2118 Specific pannier holder for V35, V37 MONOKEY® SIDE casesit can be mounted only with the specific rear rack 2118FZ




A2118 Specific screen, black 28,5 x 36 cm (H x W)complete with specific fitting kit


YAMAHA MT-07 (18)





BF36 Specific flange for fitting any of the TANKLOCK, TanklockED bagsonly compatible with bags of up to 5 ltr in capacity

A2140 Specific screen, smoked 28 x 36,5 cm (H x W)complete with specific fitting kit




DESCRIPTION





YAMAHA MT-07 TRACER (16 > 18)


CV47G814 Painted cover (standard and specific colours)in Yamaha Nimbus Grey colour / for V47, V56


PLR2130CAM s Specific rapid release side-case holder for Trekker Outback MONOKEY® CAM-SIDE18 mm diameter


CV37G814 Pair of painted cover (specific colours)Yamaha Nimbus Grey colour / for V37





D2130BO Specific low sports screen matt black 32,5 x 33 cm (H x W)to be mounted instead of the original screen


TNH2130Specific engine guard, black25 mm diameter steel tube / we recommend fitting by a qualified mechanic / it protects the upper part of the radiators / it must be mounted with TN2130






EH2130 Extension in ABS for original hand protectors


FB2130Fairing upper bracket to be mounted behind the windshield to install S902A, S920M, S920L and GPS-Smartphone holderCompatible with the original windshield and the windshield D2130ST, D2130S, D2130BO / For S902A, S920M, S920L, S952B, S953B, S954B, S955B, S956B, S957B


YAMAHA XSR700 (16 > 18)SR2126 Specific rear rack, black, for MONOLOCK® or MONOKEY® top-case

to be combined with the E251 MONOKEY® plate (sold separately), or with the plate already included in the MONOLOCK® top-cases



BF24 Specific flange for fitting any of the TANKLOCK, TanklockED bagsNot compatible with bags that have a curved base (XS308, MT505, ST603B)



140A Universal transparent screen 35 x 41cm (H x W) to be combined with the specific AL2126A fitting kit



DESCRIPTION


TRIU

MPH

- YAM

AHA

ZERO

MOT

ORCY

CLES



YAMAHA XTZ 750 SUPER TENERÉ (89 > 99)D98S Specific screen, smoked 35,4 x 28,6 cm (H x W)

compatible from '91 to '94 / to be mounted instead of the original screen

YAMAHA XV 750 VIRAGO (89 > 98)A35N Universal screen, 54,9 x 46,8 cm (H x W)

to be combined with the specific AS100A2 fitting kit / high and shaded bottom version

A23 Universal screen, 38,8 x 41 cm (H x W)to be combined with the specific AS100A2 fitting kit / low, transparent version


YAMAHA FZ8 / FAZER 8 800 (10 > 15)


PLXR366 Specific rapid release side-case holder for V35, V37 MONOKEY® SIDE casesit can be mounted without the specific rear rack 366FZ using the 366KIT / it is necessary to move the indicators from their original position

366KIT Specific kit to install the PLXR366 / TE366 without the specific rear rack 366FZ



D448S Specific screen, smoked 55,5 x 55,5 cm (H x W)only for Fazer 8 version / to be mounted instead of the original screen / 19 cm higher than the original


YAMAHA TDM 850 (96 > 01)336F Specific rear rack for MONOKEY® or MONOLOCK® top-case



YAMAHA MT-09 (13 > 16)








YAMAHA MT-09 (17 > 18)

2132FZSpecific rear rack for MONOKEY® or MONOLOCK® top-caseto be combined with the MONOKEY® M5, M7, M8A, M8B, M9A or M9B plates, or with the MONOLOCK® M5M or M6M plates, or with the aluminium bag holder EX2M / if combined with M8A, M8B, M9A, M9B it does not allow the assembly of the stop light kit or the remote control device on the top-case / maximum load allowed 6 Kg / it is necessary to move the indicators from their original position

TST2132Specific holder for pair of side bags ST604 (Sport-T range)it can be mounted without the specific rear rack 2132FZ using the IN2132KIT / it is necessary to move the indicators from their original position

IN2132KIT Specific kit to move the indicators from their original position and to enable the installation of TST2132




DESCRIPTION







YAMAHA MT-09 TRACER (15 > 17)

SR2122Specific rear chromed rack for MONOLOCK® or MONOKEY® top-caseto be combined with the M5, M7, M8A, M8B, M9A or M9B MONOKEY® plate, or with the M5M or M6M MONOLOCK® plate, or with the aluminium bag holder EX2M / if combined with M8A, M8B, M9A, M9B it does not allow the assembly of the stop light kit or the remote control device on the top-case














LS2122 Specific fitting kit to mount S310 or S322 spotlights where specific engine guard is not present

EH2122 Yamaha MT-09 Tracer (15 > 16) Extension in smoked plexiglass for original hand protectors


FB2122Fairing upper bracket to be mounted behind the windshield to install S902A, S920M, S920L and GPS-Smartphone holderCompatible with the original windshield and the windshield D2122S, 2122DT / For S902A, S920M, S920L, S952B, S953B, S954B, S955B, S956B



YAMAHA TDM 900 (02 > 14)347F Specific rear rack for MONOKEY® or MONOLOCK® top-case



PL347 Specific pannier holder for MONOKEY®, RETRO FIT side-casesmaximum load allowed 3 kg / it is necessary to move the indicators from their original position

PLX347 Specific pannier holder for V35 MONOKEY® SIDE casesit is necessary to move the indicators from their original position / only compatible with V35 MONOKEY® SIDE





DESCRIPTION


TRIU

MPH

- YAM

AHA

ZERO

MOT

ORCY

CLES



YAMAHA XSR900 (16 > 18)



TMT2128 Specific holder for pair of side bags MT501 (Metro-T range)it is not compatible with the specific rear rack 2115FZ

BF05Specific flange for fitting any of the TANKLOCK, TanklockED bagsonly compatible with TANKLOCK bags of up to 5 ltr in capacity. As the BF05 flange is not positioned centrally on the fuel tank, please be aware that the mounted position of the tanklock bag will not be central on the fuel tank










YAMAHA TRACER 900 / TRACER 900 GT (18)


CV47G814 Painted cover (standard and specific colours)in Yamaha Nimbus Grey colour / for V47, V56


TL2139KIT Specific kit to install the S250 Tool Box on PLR2139to be combined with S250 and PLR2139 / it can be mounted on either the right-hand side or left-hand side of the motorcycle

PLXR2139 Specific rapid release side-case holder for V35, V37 MONOKEY® SIDE casesit can be mounted without the specific rear rack SR2139 using the 2139KIT

CV37G814 Pair of painted cover (specific colours)Yamaha Nimbus Grey colour / for V37

PL2139CAM Specific pannier holder for Trekker Outback MONOKEY® CAM-SIDE18 mm diameter / it can be mounted without the specific rear rack SR2139 using the 2139KIT

2139KIT Specific kit to install the PLR2139, PLXR2139, PL2139CAM without the specific rear rack SR2139

S250KIT *Universal kit to install the S250 Tool Boxit can be mounted on either the right-hand side or left-hand side of the PL2139CAM / To be combined with S250 and the specific pannier holder



2139DT Specific screen, transparent 69,5 x 48 cm (H x W)to be combined with the specific D2139KIT fitting kit / 20,5 cm higher than the original





DESCRIPTION





SLD2139KIT Specific kit to install the frame slider SLD01_ _, available in four different colours: aluminium, red, green and blackto be combined with slider SLD01_ _






YAMAHA NIKEN 900 (19) BF05 Specific flange for fitting any of the TANKLOCK, TanklockED bags


YAMAHA FZS 1000 FAZER (01 > 02)



YAMAHA FZS 1000 FAZER (03 > 05)




YAMAHA FZ1 FAZER 1000 (06 > 15)

359FZSpecific rear rack for MONOLOCK® top-caseto be combined with the MONOLOCK® M5M or M6M plates / it requires fitment of top-case up to 37 ltr / maximum load allowed 6 kg / it is necessary to puncture the housing under the tail in arranged sections

PLX359 Specific pannier holder for V35, V37 MONOKEY® SIDE casesit can be mounted without the specific rear rack 359FZ using the PLX359KIT / it is necessary to move the indicators from their original position

PLXR359 Specific rapid release side-case holder for V35, V37 MONOKEY® SIDE casesit can be mounted without the specific rear rack 359FZ using the PLX359KIT / it is necessary to move the indicators from their original position

PLX359KIT Specific kit to install the PLX359 / PLXR359 without the specific rear rack 359FZ



YAMAHA FZ1 1000 (06 > 15)

365FZSpecific rear rack for MONOLOCK® top-casewe recommend mounting smaller cases MONOLOCK® in conjunction with M5M or M6M plate / It requires fitment of cases up to 35 ltr / maximum load allowed 6 kg / it is necessary to puncture the housing under the tail in arranged sections

PLX359 Specific pannier holder for V35, V37 MONOKEY® SIDE casesit is necessary to move the indicators from their original position / it can be mounted without the specific rear rack 359FZ using the 365KIT

PLXR359 Specific rapid release side-case holder for V35, V37 MONOKEY® SIDE casesit is necessary to move the indicators from their original position / it can be mounted without the specific rear rack 359FZ using the 365KIT

365KIT Specific kit to install the PLX359 / PLXR359 without the specific rear rack 365FZ

T271 Specific holder for soft side bagsit is not compatible with the specific rear rack 365FZ



YAMAHA YZF R1 1000 (09 > 12)BF05 Specific flange for fitting any of the TANKLOCK, TanklockED bags

DESCRIPTION


TRIU

MPH

- YAM

AHA

ZERO

MOT

ORCY

CLES

D2106S s Specific screen, smoked with logo Team GIVI-LCR 38 x 32 cm (H x W)to be mounted instead of the original screen

YAMAHA MT-10 (16 > 18)








YAMAHA BT 1100 BULLDOG (02 > 09)


YAMAHA XV 1100 VIRAGO (89 > 99)A23 Universal screen, transparent 38,8 x 41 cm (H x W)

only available if article AS99A2 is already fitted / low, transparent version

A35N Universal screen, transparent 54,9 x 46,8 cm (H x W)only available if article AS99A2 is already fitted / high and shaded bottom version

YAMAHA XVS 1100 DRAG STAR (99 > 02)A23 Universal screen, 38,8 x 41 cm (H x W)




YAMAHA XVS 1100 DRAG STAR CLASSIC (00 > 02)A39 Universal screen, transparent 51,7 x 57,3 cm (H x W)

only available if article AS102A2 is already fitted

YAMAHA FJ 1100 297F Specific rear rack for MONOKEY® or MONOLOCK® top-case


YAMAHA FJ 1200 (87 > 99)297F Specific rear rack for MONOKEY® or MONOLOCK® top-case


YAMAHA XJR 1200 (95 > 98)341F Specific rear rack for MONOKEY® or MONOLOCK® top-case


YAMAHA V-MAX 1200A123 Specific screen, smoked 31 x 29,5 cm (H x W)

YAMAHA XT 1200Z SUPER TENERÉ (10 > 18)

SR371Specific rear rack for MONOKEY® top-caseMONOKEY® plate included / compatible with the original side-case holder / to open the original side-cases you should remove the top-case from the plate

SRA2101Specific rear rack in aluminium for MONOKEY® top-caseIt can only be mounted to the original rack / It can only be mounted to the original rack / it can be fitted with the original side-case holders / to open the original side-cases you should remove the top-case from the plate / maximum load allowed 6kg / it does not allow the assembly of the stop light kit or the remote control device on the case





DESCRIPTION



D447STSpecific screen, transparent 57 x 44 cm (H x W)to be mounted instead of the original screen / 13 cm higher than the original / not compatible on version with a height adjustable windshield

D2119STSpecific screen, transparent 56,5 x 50 cm (H x W)only compatible with version with a height adjustable windshield / to be mounted instead of the original screen / 11 cm higher than the original

AF447 Specific sliding wind-screen transparent, Airflow. Maximum height 61 cm (12 cm of extension), width 43 cmto be mounted instead of the original screen / not compatible on version with a height adjustable windshield


TL2119KIT Specific kit to install the S250 Tool Box beneath the TN355 engine guardto be combined with S250 and TN355 / it can be mounted on either the right-hand side or left-hand side of the motorcycle


YAMAHA XT1200ZE SUPER TENERÈ (14 > 18)

SRA2101Specific rear rack in aluminium for MONOKEY® top-casecan only be mounted to the original rack / It can only be mounted to the original rack / it can be fitted with the original side-case holders / to open the original side-cases you should remove the top-case from the plate / maximum load allowed 6kg / it does not allow the assembly of the stop light kit or the remote control device on the case

SR371Specific rear rack for MONOKEY® top-caseit is necessary to remove the original rack / MONOKEY® plate included / compatible with the original side-case holder / to open the original side-cases you should remove the top-case from the plate





D2119ST Specific screen, transparent 56,5 x 50 cm (H x W)to be mounted instead of the original screen / 11 cm higher than the original



TL2119KIT Specific kit to install the S250 Tool Box beneath the TN355 engine guardto be combined with S250 and TN355 / it can be mounted on either the right-hand side or left-hand side of the motorcycle



YAMAHA FJR 1300 (01 > 05) SR346 Specific rear rack for MONOKEY® top-case

MONOKEY® plate included / compatible with the original side-case holder / maximum load allowed 6 Kg


YAMAHA FJR 1300 (06 > 12) E228 Specific rear rack for MONOKEY® top-case

MONOKEY® plate included / maximum load 6 Kg.

E228M Specific rear rack for MONOLOCK® top-caseMONOLOCK® plate included / maximum load 6 Kg.





YAMAHA FJR 1300 (13 > 18)E228 Specific rear rack for MONOKEY® top-case

MONOKEY® plate included / maximum load 6 Kg.

E228M Specific rear rack for MONOLOCK® top-caseMONOLOCK® plate included / maximum load 6 Kg.



DESCRIPTION


TRIU

MPH

- YAM

AHA

ZERO

MOT

ORCY

CLES



TN2109OX s Specific engine guard, stainless steel25 mm diameter steel tube / we recommend fitting by a qualified mechanic

YAMAHA XJR 1300 (98 > 02)341F Specific rear rack for MONOKEY® or MONOLOCK® top-case


YAMAHA XJR 1300 (04 > 06) 355F Specific rear rack for MONOKEY® or MONOLOCK® top-case


YAMAHA XJR 1300 (07 > 14) 361F Specific rear rack for MONOKEY® or MONOLOCK® top-case




YAMAHA XVS 1300 MIDNIGHT STAR (07 > 16)A46 Specific screen, transparent 56 x 57 cm (H x W)

to be combined with the specific AS103A2 fitting kit

ZERO MOTORCYCLESZERO MOTORCYCLES ZERO DS (18)

05SKITSpecific kit to mount the S900A Smart Bar or the S901A Smart Mountalso for version DSR / The S901A is compatible with the supports SGZ39SM (for Garmin Zumo 345LM / 390LM/395LM/590LM/595LM) and STTR40SM (for Tom Tom Rider 40/400/410/42/420/450/500/550)


SPARE PARTSSpare parts for discontinued top cases that are not included in the pricelist are available on WEBORDER

193193EXPLORE. ENJOY. SPAR

E PAR

TS &

DIS

PLAY

S

OBKN58A / OBKN58B / OBKN42A / OBKN42B TREKKER OUTBACK TOP CASE

ZOBKN58ACM OBKN58A assembled Top Shell silver aluminiumZOBKN58BCM OBKN58B assembled Top Shell black aluminiumZOBKN42ACM OBKN42A assembled Top Shell silver aluminiumZOBKN42BCM OBKN42B assembled Top Shell black aluminiumZOBK42AFM s

OBK42A assembled Bottom Shell aluminium

ZOBK42BFM s

OBK42B assembled Bottom Shell black aluminium

ZOBKN58AFM OBKN58A assembled Bottom Shell aluminiumZOBKN58BFM OBKN58B assembled Bottom Shell black aluminiumZOBKN42AFM OBKN42A assembled Bottom Shell aluminium

ZOBKN42BFM OBKN42B assembled Bottom Shell black aluminium3 Z8024MR Lock set4 Z115R Stop bag opening yarn, 2 pcs.5 Z8098R Soft inner mat for OBK585 Z8099R Soft inner mat for OBK426 Z1782CR Bolt with springs7 Z8025R Mounted release system

8 SL101 Security lock set including cylinder, 2 keys, bush and under lock platelets

Z8032R Dustproof cap OBK42 / OBK58

TREKKER OUTBACK ATV 110 LTRSZOBK110ACM OBK110A assembled Top ShellZOBK110AFM OBK110A bottom shellZ4822CPMOBK110R Lock set OBK110AZ115R Stop bag opening yarn, 2 pcs.

Z8902R Mat OBK110AZ8903R Rubber caps for OBK110A drainage

SL102 Security Lock key set for 2 cases, including bush and under lock platelets

194

SPARE PARTS & DISPLAYS s = Item available until it runs out of stock

OBKN48A / OBKN48B / OBKN37A / OBKN37B TREKKER OUTBACK - SIDE-CASE

1

2

3

6

4

5

7

7

1 ZOBK37ALFM s OBK37AL assembled Bottom Shell silver, left sideZOBK37BLFM s OBK37BL assembled Bottom Shell black, left sideZOBK37BRFM s OBK37BR assembled Bottom Shell black, right sideZOBK48BLFM s OBK48BL assembled Bottom Shell black, left sideZOBK48ARFM s OBK48AR assembled Bottom Shell silver, right sideZOBK48BRFM s OBK48BR assembled Bottom Shell black, right sideZOBKN37ALFM OBKN37AL assembled Bottom Shell silver, left side

ZOBKN37ARFM OBKN37AR assembled Bottom Shell silver, right side

ZOBKN37BLFM OBKN37BL assembled Bottom Shell black, left side

ZOBKN37BRFM OBKN37BR assembled Bottom Shell black, right side

ZOBKN48ALFM OBKN48AL assembled Bottom Shell silver, left side

ZOBKN48ARFM OBKN48AR assembled Bottom Shell silver, right side

ZOBKN48BLFM OBKN48BL assembled Bottom Shell black, left side

ZOBKN48BRFM OBKN48BR assembled Bottom Shell black, right side

2 ZOBK37ALCM s OBK37AL assembled Top Shell silver, left sideZOBK37BLCM s OBK37BL assembled Top Shell black, left sideZOBK37BRCM s OBK37BR assembled Top Shell black, right sideZOBK48ALCM s OBK48AL assembled Top Shell silver, left side

ZOBK48BLCM s OBK48BL assembled Top Shell black, left sideZOBKN37ALCM OBKN37AL assembled Top Shell silver, left sideZOBKN37ARCM OBKN37AR assembled Top Shell silver, right sideZOBKN37BLCM OBKN37BL assembled Top Shell black, left side ZOBKN37BRCM OBKN37BR assembled Top Shell black, right sideZOBKN48ALCM OBKN48AL assembled Top Shell silver, left sideZOBKN48BLCM OBKN48BL assembled Top Shell black, left sideZOBKN48BRCM OBKN48BR assembled Top Shell black, right side

3 Z4822SXMR Left hinge stopZ4822DXMR Right hinge stop

4 Z4810SXMR Rear fitting system, left sideZ4810DXMR Rear fitting system, right sideZ4827DXR Replacement lever and arm Outback, right sideZ4827SXR Replacement lever and arm Outback, left side

5 Z4830R Aluminium release lever for Trekker Outback 37 ltZ4831R Aluminium release lever for Trekker Outback 48 lt

6 Z4812R Angled cover7 Z115R Stop bag opening yarn, 2 pcs.

SL101 Security lock set including cylinder, 2 keys, bush and under lock platelets

Z4912R Trim


E PAR

TS &

DIS

PLAY

S

DLM36 TREKKER DOLOMITI

1 ZDLM36ALCM DLM36ASX assembled Top Shell in aluminium, leftZDLM36ARCM DLM36ADX assembled Top Shell in aluminium, rightZDLM36BLCM DLM36BSX black painted assembled Top Shell, leftZDLM36BRCM DLM36BDX black painted assembled Top Shell, right

2 ZDLM36ALFM DLM36ASX assembled bottom shell in aluminium, leftZDLM36ARFM DLM36ADX assembled bottom shell in aluminium, rightZDLM36BLFM DLM36BSX black painted assembled bottom shell, left

ZDLM36BRFM DLM36BDX black painted assembled bottom shell, right

3 Z9133SXMR Left assembled hinge stop DLM36_SX

Z9133DXMR Right assembled hinge stop DLM36_DX4 Z599 Nylon stop bag opening yarn5 DLM36KIT Spare parts mounting kit to mount DLM36 on PL/PLR6 Z9509R Fitting kit MONOKEY® DLM367 Z9102R Lock/unlock key DLM368 ST9034KITR Fitting screws DLM36


196


DLM46 / DLM30 TREKKER DOLOMITI

1 Z7710R DLM46A - DLM30A top-shellZ7710BR DLM46B - DLM30B black painted top-shell

2 Z7716-46R DLM46A bottom shellZ7716-30R DLM30A bottom shellZ7716-30BR DLM30B painted black bottom shellZ7716-46BR DLM46B painted black bottom shell

3 Z8024M46R DLM46 lock set

Z8024M30R DLM30 lock set4 Z115R Stop bag opening yarn, 2 pcs.5 Z8103R Inner mat6 Z645CR Opening push button chromed7 Z1782CR Bolt with springs



E PAR

TS &

DIS

PLAY

S

V56N / V56NN / V56NT / V56NNT MAXIA 4

1 ZV56CNM V56N assembled Top ShellZV56CNNM V56NN assembled Top ShellZV56CNTM V56NT assembled Top ShellZV56CNNTM V56NNT assembled Top Shell

2 ZV56FNM V56N-V56NN assembled Bottom ShellZV56FNTM V56NT-V56NNT assembled Bottom Shell

3 Z8900R Inner mat4 Z398NMV56R V56 mounted hinge5 Z564A900R Side bands V56

6 Z560KITR Top-shell red reflectors with chromed stop lamp holder (for V56N / V56NN)

Z560KITF Top-shell smoked reflectors with chromed stop lamp holder (for V56NT/ V56NNT)

Z561KITR Band red reflectors with chromed stop lamp holder (for V56N / V56NN)

Z561KITF Band smoked reflectors with chromed stop lamp holder (for V56NT/ V56NNT)

7 Z562R Top-shell coupling tooth, complete

8 Z695A900V56R Front plate V569 Z692R Replacement rear band10 CV47N Black embossed cover11 Z4706OXCR Aluminium cover with anodizing cover/cap

12 Z4707R Cover with carbon texture finishing (for V47NN / V47NNT / V56NN / V56NNT)

13 Z599 Nylon stop bag opening yarn14 Z1782R Bolt + Bolt Springs


16 Z4514R Plate below lock for Security Lock key17 Z285NEWR Elastic belt18 Z1908R Trim

19 Z206R Button + Button Spring (for E55 MAXIA 3 / V56N / V56NN )

Z206NR Button + Button Spring (for TECH version)Z721R Pin. D. 04x85 mm

198


E55 MAXIA 3 / E55 MAXIA 3 TECH

1 Z55CNM E55 assembled Top Shell BlackZ55CNTM E55 TECH Top Shell Black

2 Z55FNM E55 assembled Bottom Shell BlackZ55FNTM E55 TECH assembled Bottom Shell Black

3 Z398NMR Hinge stop (for top-case E55 MAXIA 3)3 Z398NTMR Hinge stop (for top-case E55NT TECH)4 Z677R Latch System Cover5 Z590R Pin. Medium, 2 pcs.6 Z285 Inner strap7 ZV55R Adhesive Givi Logo8 Z696R Pair of side reflectors (for top-case E55 MAXIA 3)9 Z694R Central reflector (for top-case E55 MAXIA 3)9 Z694FR Central reflector (for top-case E55NT TECH)11 Z160 Inner document holder

12 Z692R Replacement rear band12 Z692N902R Replacement back band (for top-case E55NT TECH)13 Z693N902R s Pair of side bands (for top-case E55NT TECH)14 Z1908R Trim15 Z1782R Bolt + Bolt Springs

16 Z206R Button + Button Spring (for E55 MAXIA 3 / V56N / V56NN )

16 Z206NR Button + Button Spring (for TECH version)17 Z661 Key locks with corresponding bush with red handle

17 Z661A Key locks with corresponding bush with silver handle (thickness 2.5 mm)

Z4514R Plate below lock for Security Lock key18 Z695A900SR Front handle panel, matt silver with GIVI logo

Z695N902SR Front handle panel, black with GIVI logoZ2276R Pair of stop bag opening yarn


E PAR

TS &

DIS

PLAY

S

TRK52N / TRK52B TREKKER

ZTRK52CNM TRK52N assembled top-shellZTRK52CBM TRK52B assembled Top ShellZTRK52FNM TRK52N assembled bottom-shell blackZ641N52M Hinge stop

4 Z2202R Black metal plate cover/cap

5 Z2211OXCR Aluminium cover with anodizing cover/cap for TRK52N

Z2211NR Aluminium cover black painted for TRK52B Black Line

6 Z645CR Opening push button chromed

7 Z1782CR Bolt8 Z191R Push button spring, 1 pcs.9 Z590R Pin. Medium, 2 pcs.10 Z3220R Trim11 Z2170R Elastic belt12 Z599 Nylon stop bag opening yarn


14 Z4513R Plate below lock for Security Lock key

200


TRK46N / TRK33N / TRK46B / TRK33B TREKKER

Z2073CNM TRK33N / TRK46N top-shell

Z2073CBM TRK33B / TRK46B Trekker Black Line assembled Top Shell

Z2061FNM TRK46N bottom-shell blackZ2062FNM TRK33N bottom-shell blackZ641N46M Hinge stop (for top-case TRK46N)Z641N33M Hinge stop (for top-case TRK33N)

6 Z2063R Black metal plate cover/cap and open lids7 Z2070OXR Aluminium cover with anodizing cover/cap and open lids

Z2070NR Aluminium cover black painted, with cover/cap and open lids, for TRK33B / TRK46B Black Line

8 Z2067R Double anchor with black washer9 Z109 Long bolt springs10 Z106 Bolt11 Z645CR Opening push button chromed

Z2106R Elastic belt

13 Z115R Stop bag opening yarn, 2 pcs.14 Z2072R Trim15 Z409R Name holder, 1 pcs.16 Z630 Steel spheres D. 617 Z632R Steel torsion spring

Z590R Pin. Medium, 2 pcs.19 Z640R Plate below lock for standard key

Z4513R Plate below lock for Security Lock key20 Z643NR Lock set element black21 Z644NR Opening push button black

Z647R Torsion spring, 1 pcs.23 Z648 Cylinder spring24 Z721R Pin. D. 04x85 mm


Z2701KITR Additional zipper kit, side and external


E PAR

TS &

DIS

PLAY

S

E52 MAXIA / E52 MAXIA TECH

2 Z52FNM E52 bottom-shell, blackZ52FNTM E52 Tech assembled bottom-shell black

3 Z106 Bolt4 Z109 Long bolt springs5 Z115R Stop bag opening yarn, 2 pcs.6 Z159R Bag lock lining, 1 pcs.

Z1237 Push button spring with washer7 Z160 Inner document holder9 Z590R Pin. Medium, 2 pcs.10 Z206 Push button red10 Z206NR Button + Button Spring (for TECH version)11 Z218N Black rear band11 Z218VS Grey rear band12 Z223 Red reflector12 Z223TR Smoked reflectors (for E52 Tech)14 Z286 Glass for small name plate15 Z339 Red pulley16 Z633 Spare elastic belt17 Z684C Satined trim (5 pcs.)18 Z129 MAXIA sticker (on top-shell)19 Z338 Straps holder clip

Z682N Lock setZ682NTM Hinge stop (for E52Tech)

21 Z661 Key locks with corresponding bush with red handle

22 Z229 Chromed GIVI brand23 Z234A Acetalic latch (A)24 Z234B Acetalic latch (B)25 Z297 s Pin 140 mm26 Z367N Black handle27 Z368N Bottom black hinge with serigraphy28 Z611 Black nylon button29 Z612N Black nylon rod30 Z616KIT Reflecting red plate

30 Z616NKIT Upper reflecting smoked plate (only for E52 Maxia Tech)

31 Z617 Upper reflecting red plate31 Z617NR Upper reflecting silver plate (for E52 Tech)32 Z626 White screen for central handle33 Z628 Black lock plate34 Z630 Steel spheres D. 635 Z631 Zinc-plated cylindric steel spring36 Z632R Steel torsion spring37 Z634 Steel spring for rod38 Z721R Pin. D. 04x85 mm39 Z195 Pin D. 04x80 mm40 Z723 Pin. D. 04x23 mm41 Z613N Upper part lock set, black42 Z133 Steel sliding plate43 Z134 Handle plate

202


V47 / V47 TECH / V47NN / V47NN TECH / V47NNTFL

ZV47CNM V47 assembled top-shellZV47CNTM V47 Tech assembled top-shellZV47FNM V47 assembled bottom-shell blackZV47FNTM V47 Tech assembled bottom-shell black

3 Z4706OXCR Aluminium cover with anodizing cover/cap

Z4707R Cover with carbon texture finishing (for V47NN / V47NNT / V56NN / V56NNT)

4 Z4703R Red reflectors with stop lamp holder (for V47)

4 Z4703FR Smoked reflectors with stop lamp holder (for V47 Tech)

5 Z4702R Red bottom frame with stop lamp holder (for V47)

5 Z4702FR Smoked bottom frame with stop lamp holder (for V47 Tech)

Z3007NV47M Mounted lock set

Z3007NTV47M Mounted lock set (for V47 Tech)7 Z1983R Push button red7 Z645CR Opening push button chromed8 Z4701A900R Silver rear band9 Z590R Pin. Medium, 2 pcs.10 Z106 Bolt11 Z109 Long bolt springs12 Z3012R Closure system mounted on the lid13 Z790R Trim14 Z115R Stop bag opening yarn, 2 pcs.15 Z285NEWR Elastic belt17 Z4512R Plate below lock for Security Lock key


E PAR

TS &

DIS

PLAY

S

V46 / V46 TECH

1 Z46CNM V46 top-shell with cover, black2 Z46FNM V46 bottom-shell, black3 Z106 Bolt4 Z109 Long bolt springs5 Z112R Red pulley, 4 pcs.6 Z160 Inner document holder7 Z229 Chromed GIVI brand8 Z285 Inner strap9 Z599 Nylon stop bag opening yarn10 Z645R Push button red10 Z645CR Opening push button chromed

11 Z731 Top-case reflector (right and left, for top-case MONOKEY® V46)

11 Z731TR Top-case reflector (right and left, for top-case MONOKEY® V46NT TECH)

12 Z732KIT Central top-case reflector (for top-case MONOKEY® V46)

12 Z732TR Central top-case reflector (for top-case MONOKEY® V46NT TECH)

13 Z734SET Central band, rear band and band right and left, ABS silver A900


15 Z741 Hook for fixing the document holder17 ZV45 V35/V46 logo18 Z769 Black lock lining

Z641NM2 Lock setZ641NTM Lock set (for TECH version)

19 Z409R Name holder, 1 pcs.20 Z630 Steel spheres D. 621 Z632R Steel torsion spring22 Z637R Pin. D. 04x75 mm, (1 piece)23 Z640R Plate below lock for standard key23 Z4513R Plate below lock for Security Lock key24 Z641NR Hinge black25 Z643R Lock set element red, 1 pcs.25 Z643NR Lock set element black26 Z644R Opening push button, red, 1 pcs. (for top-case V46)27 Z647R Torsion spring, 1 pcs.28 Z648 Cylinder spring29 Z721R Pin. D. 04x85 mm30 Z661 Key locks with corresponding bush with red handle

30 Z661A Key locks with corresponding bush with silver handle (thickness 2.5 mm)

204


E460

1 Z460CNM E460 top-shell black2 Z360FNM E460-E360 bottom-shell black3 Z115R Stop bag opening yarn, 2 pcs.4 Z159R Bag lock lining, 1 pcs.5 Z828 Stop lamp holder6 Z106 Bolt7 Z109 Long bolt springs8 Z112R Red pulley, 4 pcs.9 Z140R Key locks with corresponding bush with red handle11 Z1237 Push button spring with washer13 Z195 Pin D. 04x80 mm14 Z200 GIVI logo MONOKEY®15 Z214 Top-case reflector

16 Z215N Rear band black17 Z217 Push button19 Z236 Hinge spring20 Z277 Plate below lock22 Z285 Inner strap24 Z314N Hinge black25 Z829 Light holder (black)26 Z337 Top-case reflector27 Z362 Light seat chromed

Z358 Circuit with lamps for version with stop light already mounted

Z155 Straps holder clipZ314NM Hinge black, mounted

E360

1 Z360CNM E360 top-shell black2 Z360FNM E460-E360 bottom-shell black3 Z115R Stop bag opening yarn, 2 pcs.4 Z159R Bag lock lining, 1 pcs.5 Z106 Bolt6 Z109 Long bolt springs7 Z112R Red pulley, 4 pcs.8 Z140R Key locks with corresponding bush with red handle10 Z1237 Push button spring with washer

12 Z195 Pin D. 04x80 mm13 Z200 GIVI logo MONOKEY®14 Z214 Top-case reflector15 Z215N Rear band black16 Z217 Push button18 Z277 Plate below lock20 Z285 Inner strap22 Z314N Hinge black

Z155 Straps holder clip


E PAR

TS &

DIS

PLAY

S

V40N / V40NT

1 Z420CNM V40N assembled Top ShellZ420CNTM V40NT assembled Top Shell

2 Z420FNM V40 assembled bottom shell, blackZ420FNTM V40NT assembled Bottom Shell

3 Z4201R Red reflectors (for V40N)Z4201FR Smoked reflectors (for V40NT)

4 Z4200R V40 central plate5 Z3007NV47M Mounted lock set

Z3007NTV47M Mounted lock set (for V47 Tech)6 Z3012R Closure system mounted on the lid

7 Z1983R Push button redZ645CR Opening push button chromed

8 Z790R Trim9 Z109 Long bolt springs10 Z106 Bolt11 Z590R Pin. Medium, 2 pcs.12 Z115R Stop bag opening yarn, 2 pcs.


14 Z4512R Plate below lock for Security Lock key

206


E41 KEYLESS

1 Z41CDXSM E41 Top -shell right, black1 Z41CSXSM E41 Top-shell left, black2 Z41FNM E41 bottom shell, black3 Z599 Nylon stop bag opening yarn4 Z106 Bolt5 Z109 Long bolt springs6 Z112R Red pulley, 4 pcs.7 Z140R Key locks with corresponding bush with red handle8 Z1237 Push button spring with washer9 Z195 Pin D. 04x80 mm10 Z217 Push button11 Z236 Hinge spring12 Z277 Plate below lock13 Z285 Inner strap

15 Z314N Hinge black17 Z1235 Injection covering cap18 Z548 Keyless logo19 Z590R Pin. Medium, 2 pcs.20 Z726 Black lock lining21 Z533 Reflectors with white bottom (pair)22 Z148M Mounted hinge (including combination)23 Z200 GIVI logo MONOKEY®24 Z539 Red hooks to fix lid, (1 pcs.)25 Z544 Caps (4 pcs.§)27 Z592 41 mm pin to fix the lid28 Z1239 Hinge plate in nylon29 Z1238 Nylon coupling tooth


E PAR

TS &

DIS

PLAY

S

V37N / V37NT / V37NN / V37NNT

1 ZV37CNMDX V37 assembled Top Shell, right sideZV37CNMSX V37 assembled Top Shell, left sideZV37CNTMDX V37 TECH assembled Top Shell, right sideZV37CNTMSX V37 TECH assembled Top Shell, left sideZV37CNNMDX V37NN assembled Top Shell, right sideZV37CNNMSX V37NN assembled Top Shell, left sideZV37CNNTMDX V37NNT assembled Top Shell, right sideZV37CNNTMSX V37NNT assembled Top Shell, left side

2 ZV37FNMDX V37N-V37NN assembled Bottom Shell, right sideZV37FNMSX V37N-V37NN assembled Bottom Shell, left sideZV37FNTMDX V37NT-V37NNT assembled Bottom Shell, right sideZV37FNTMSX V37NT-V37NNT assembled Bottom Shell, left side

3 Z3703R Red reflectors with silver bottomZ3703FR Smoked reflectors with silver bottom

4 Z795R Trim (1 pc)5 Z3701MATTDXR Black cover, right side

Z3701MATTSXR Black cover, left side

Z3702A900DXR Silver painted cover, right sideZ3702A900SXR Silver painted cover, left sideZ3702NDXR Black embossed cover, right side Z3702NSXR Black embossed cover, left side

6 Z9590R Rear fitting kitZ641NM2 Lock setZ641NTM Lock set (for TECH version)

8 Z1462R Elastic belt9 Z115R Stop bag opening yarn, 2 pcs.10 Z112R Red pulley, 4 pcs.11 Z109 Long bolt springs12 Z106 Bolt13 Z645R Push button red

Z645CR Opening push button chromedZ1404R Push button guide 1pcs.Z1405R Conical spacer, 1 pc.


208


V35 / V35 TECH

Z35FNMDX Right bottom-shell (mounted)Z35FNMSX Left bottom-shell (mounted)Z35CNMDX Right top-shell (mounted)Z35CNMSX Left top-shell (mounted)Z641NM2 Lock setZ641NTM Lock set (for TECH version)

1 Z1462R Elastic belt2 Z115R Stop bag opening yarn, 2 pcs.3 Z112R Red pulley, 4 pcs.4 Z637R Pin. D. 04x75 mm, (1 piece)5 Z769 Black lock lining6 Z1424R Reflectors (right and left)

Z1424TR Reflectors with silver bottom, right and left (for V35 TECH)

7 Z1426R Low cover (right and left)8 ZV45 V35/V46 logo9 Z109 Long bolt springs

10 Z1404R Push button guide 1pcs.11 Z106 Bolt12 Z1405R Conical spacer, 1 pc.13 Z645R Push button red


15 Z641NR Hinge black16 Z721R Pin. D. 04x85 mm17 Z1384R Cylinder spring and steel spheres, 1 kit18 Z644R Opening push button, red, 1 pcs. (for top-case V46)19 Z640R Plate below lock for standard key20 Z647R Torsion spring, 1 pcs.21 Z643R Lock set element red, 1 pcs.22 Z632R Steel torsion spring23 Z409R Name holder, 1 pcs.24 Z1387R Pair of rotational rear clamps


E PAR

TS &

DIS

PLAY

S

E22

1 Z22CNDXM E22 assembled top-shell black (right)Z22CNSXM E22 assembled top-shell black (left)

2 Z22FNDXM E22 right bottom-shell (assembled)Z22FNSXM E22 left bottom-shell (assembled)

3 Z4023R Closing system (for E22)

4 Z4020R Pair of handles (for E22)5 ZS310R Connecting pin. bottom / lid (for E22)6 Z4025R Bolt + Bolt Springs (for E22)7 Z33R Adhesive Givi Logo

E21 CRUISER

3 Z109 Long bolt springs4 Z159R Bag lock lining, 1 pcs.5 Z200 GIVI logo MONOKEY®7 Z325 Pannier opening sticker9 Z387 s Bolt10 Z388 s Push button

11 Z389 s Complete key lock plate12 Z390 Pin D. 02x60 mm E2113 Z605 Handle14 Z606 Handle mounting set black17 Z140R Key locks with corresponding bush with red handle

1

2

3

4

5

6

7

210


B47 BLADE / B47 BLADE TECH

ZB47CNM B47 Blade assembled top-shell blackZB47CNTM B47 Blade Tech assembled top-shell blackZB47FNM B47 Blade assembled bottom-shell blackZB47FNTM B47 Blade Tech assembled bottom-shell blackZ3007NM Mounted lock setZ3007NTM Mounted lock set NT

7 Z3012R Closure system mounted on the lid8 Z4506R Red reflectors with stop lamp holder (for B47 Blade)

8 Z4506FR Smoked reflectors with stop lamp holder (for B47 Blade Tech)

10 Z599 Nylon stop bag opening yarn

11 Z1983R Push button red11 Z645CR Opening push button chromed13 Z761NR Bolt, 1 pcs.14 Z191R Push button spring, 1 pcs.15 Z4504AR Chromed Blade logo16 Z790R Trim17 Z590R Pin. Medium, 2 pcs.18 Z140R Key locks with corresponding bush with red handle

Z661A Key locks with corresponding bush with silver handle20 Z3006R Plate below lock, for standard key

Z4512R Plate below lock for Security Lock key


E PAR

TS &

DIS

PLAY

S

E470 SIMPLY III / E470 SIMPLY III TECH

1 Z458R E470 oval logo, 1 pcs2 Z1294R E470 GIVI logo, 1 pc.3 Z744R Top-case reflector, red

Z744FR Top-case smoked reflector, (for E470 Tech)4 Z1394 Top-case reflectors (right and left)

Z743TR Smoked reflectors, right and left, (for E470 Tech)5 Z470CNR E470 top-shell black, 1 pcs.

Z470CNTM E470 Tech assembled top-shellZ470CNMR E470 assembled top-shell blackZ450FNM E450 - E470 bottom-shell black

6 Z159R Bag lock lining, 1 pcs.7 Z112R Red pulley, 4 pcs.8 Z635R Pin. D. 04x48 mm, 2 pcs.9 Z115R Stop bag opening yarn, 2 pcs.11 Z1235 Injection covering cap12 Z191R Push button spring, 1 pcs.13 Z762NR Bolt, 1 pcs.

14 Z645R Push button redZ645CR Opening push button chromed

15 Z140R Key locks with corresponding bush with red handle16 Z641NR Hinge black17 Z637R Pin. D. 04x75 mm, (1 piece)18 Z721R Pin. D. 04x85 mm19 Z640R Plate below lock for standard key

Z4513R Plate below lock for Security Lock key20 Z1384R Cylinder spring and steel spheres, 1 kit21 Z644R Opening push button, red, 1 pcs. (for top-case V46)22 Z647R Torsion spring, 1 pcs.23 Z632R Steel torsion spring24 Z643R Lock set element red, 1 pcs.25 Z409R Name holder, 1 pcs.

Z641NM Lock setZ641NTM Lock set (for TECH version)

212


E450 SIMPLY II

1 Z450CNM E450 top-shell black2 Z450FNM E450 - E470 bottom-shell black3 Z112R Red pulley, 4 pcs.4 Z115R Stop bag opening yarn, 2 pcs.5 Z159R Bag lock lining, 1 pcs.6 Z191R Push button spring, 1 pcs.7 Z451 Oval GIVI mark (reflector)8 Z1234 Reflector with white background9 Z457 s Pair of SIMPLY stickers DX/SX10 Z458R E470 oval logo, 1 pcs11 Z590R Pin. Medium, 2 pcs.12 Z645R Push button red13 Z762NR Bolt, 1 pcs.

Z358 Circuit with lamps for version with stop light already mounted

Z641NM Lock set14 Z140R Key locks with corresponding bush with red handle15 Z409R Name holder, 1 pcs.16 Z630 Steel spheres D. 617 Z632R Steel torsion spring18 Z637R Pin. D. 04x75 mm, (1 piece)19 Z640R Plate below lock for standard key

Z4513R Plate below lock for Security Lock key20 Z641NR Hinge black21 Z648 Cylinder spring22 Z643R Lock set element red, 1 pcs.23 Z644R Opening push button, red, 1 pcs. (for top-case V46)24 Z647R Torsion spring, 1 pcs.25 Z721R Pin. D. 04x85 mm26 Z1235 Injection covering cap


E PAR

TS &

DIS

PLAY

S

B37 BLADE / B37 BLADE TECH

ZB37CNM B37 Blade assembled top-shell blackZB37CNTM B37 Blade Tech assembled top-shell blackZB37FNM B37 Blade / B360 assembled bottom-shell black

ZB37FNTM B37 Blade Tech / B360 Tech assembled bottom-shell black

Z3007NM Mounted lock setZ3007NTM Mounted lock set NT

7 Z3012R Closure system mounted on the lid8 Z4506R Red reflectors with stop lamp holder (for B47 Blade)

8 Z4506FR Smoked reflectors with stop lamp holder (for B47 Blade Tech)

10 Z645R Push button red

10 Z645CR Opening push button chromed12 Z191R Push button spring, 1 pcs.13 Z790R Trim14 Z599 Nylon stop bag opening yarn15 Z761NR Bolt, 1 pcs.16 Z4504AR Chromed Blade logo17 Z590R Pin. Medium, 2 pcs.18 Z140R Key locks with corresponding bush with red handle



214


E370 / E370 TECH

1 Z1294R E470 GIVI logo, 1 pcs2 Z750R Top-case reflector, red

Z750TR Top-case smoked reflector, (for E370 Tech)3 Z1383R Top-case reflectors, right and left (only for E370)

Z1383TR Smoked reflectors (right and left), 1 kit (only for E370 Tech)

4 Z370CNR E370 top-shell black, 1 pcs.Z370CNTM E370 Tech assembled top-shellZ846R Circuit covering cap, 1 pc.Z350FNM E350 - E340 - E370 bottom-shell blackZ370CNMR E370 assembled top-shell blackZ641NM Lock setZ641NTM Lock set (for TECH version)

5 Z159R Bag lock lining, 1 pcs.6 Z112R Red pulley, 4 pcs.7 Z115R Stop bag opening yarn, 2 pcs.8 Z635R Pin. D. 04x48 mm, 2 pcs.10 Z1235 Injection covering cap11 Z191R Push button spring, 1 pcs.

12 Z761NR Bolt, 1 pcs.13 Z645R Push button red13 Z645CR Opening push button chromed14 Z140R Key locks with corresponding bush with red handle14 Z661A Key locks with corresponding bush with silver handle15 Z641NR Hinge black16 Z637R Pin. D. 04x75 mm, (1 piece)17 Z1384R Cylinder spring and steel spheres, 1 kit18 Z721R Pin. D. 04x85 mm19 Z640R Plate below lock for standard key

Z4513R Plate below lock for Security Lock key20 Z644R Opening push button, red, 1 pcs. (for top-case V46)20 Z644NR Opening push button black21 Z632R Steel torsion spring22 Z643R Lock set element red, 1 pcs.22 Z643NR Lock set element black23 Z409R Name holder, 1 pcs.24 Z647R Torsion spring, 1 pcs.


E PAR

TS &

DIS

PLAY

S

B360N / B360NT

1 ZB360CNM B360N assembled Top ShellZB360CNTM B360NT assembled Top Shell

2 ZB37FNM B37 Blade / B360 assembled bottom-shell black

ZB37FNTM B37 Blade Tech / B360 Tech assembled bottom-shell black

3 Z2514R Red reflectorsZ2514FR Smoked reflectors

4 Z2513R Central plate5 Z3007NM Mounted lock set

Z3007NTM Mounted lock set NT6 Z3012R Closure system mounted on the lid7 Z645R Push button red

Z645CR Opening push button chromed8 Z191R Push button spring, 1 pcs.9 Z790R Trim10 Z599 Nylon stop bag opening yarn11 Z761NR Bolt, 1 pcs.12 Z590R Pin. Medium, 2 pcs.13 Z140R Key locks with corresponding bush with red handle




216


E350

2 Z350FNM E350 - E340 - E370 bottom-shell black3 Z112R Red pulley, 4 pcs.4 Z115R Stop bag opening yarn, 2 pcs.5 Z159R Bag lock lining, 1 pcs.6 Z191R Push button spring, 1 pcs.7 Z635R Pin. D. 04x48 mm, 2 pcs.9 Z645R Push button red12 Z761NR Bolt, 1 pcs.13 Z641NM Lock set14 Z140R Key locks with corresponding bush with red handle15 Z409R Name holder, 1 pcs.16 Z630 Steel spheres D. 6

17 Z632R Steel torsion spring18 Z637R Pin. D. 04x75 mm, (1 piece)19 Z640R Plate below lock for standard key

Z4513R Plate below lock for Security Lock key20 Z641NR Hinge black21 Z648 Cylinder spring22 Z643R Lock set element red, 1 pcs.23 Z644R Opening push button, red, 1 pcs. (for top-case V46)24 Z647R Torsion spring, 1 pcs.25 Z721R Pin. D. 04x85 mm26 Z1235 Injection covering cap28 Z846R Circuit covering cap, 1 pc.


E PAR

TS &

DIS

PLAY

S

B34NMAL / B34NTMAL

1 Z3400CNM B34NMAL assembled Top Shell Black1 Z3400CNTM B34NTMAL assembled Top Shell2 Z3400FNM B34NMAL assembled bottom shell, black2 Z3400FNTM B34NTMAL assembled bottom shell3 Z2751NM Lock set3 Z2751NTM Lock set for Tech version4 Z3402R Red reflectors (for B34NMAL)4 Z3402FR Smoked reflectors (for B34NTMAL)5 Z3403R Central plate6 Z645R Push button red6 Z645CR Opening push button chromed

7 Z191R Push button spring, 1 pcs.8 Z3411R Trim9 Z115R Stop bag opening yarn, 2 pcs.10 Z761NR Bolt, 1 pcs.11 Z590R Pin. Medium, 2 pcs.12 Z140R Key locks with corresponding bush with red handle12 Z661A Key locks with corresponding bush with silver handle13 Z3006R Plate below lock, for standard key14 Z4512R Plate below lock for Security Lock key15 Z3405R Top-shell coupling tooth, complete

218


E340 VISION / E340 VISION TECH

1 Z340CNM E340 top-shell blackZ340CNTM E340 Tech assembled top-shell

2 Z350FNM E350 - E340 - E370 bottom-shell black3 Z112R Red pulley, 4 pcs.4 Z115R Stop bag opening yarn, 2 pcs.5 Z159R Bag lock lining, 1 pcs.6 Z191R Push button spring, 1 pcs.7 Z635R Pin. D. 04x48 mm, 2 pcs.8 Z1648R Red reflector with silver Bottom-shell

Z1648FR Smoked reflector with silver bottom (for E340 Tech)9 Z645R Push button red

Z645CR Opening push button chromed10 Z229 Chromed GIVI brand11 Z721R Pin. D. 04x85 mm12 Z761NR Bolt, 1 pcs.

13 Z1235 Injection covering capZ641NM Lock setZ641NTM Lock set (for TECH version)

14 Z140R Key locks with corresponding bush with red handle15 Z409R Name holder, 1 pcs.16 Z630 Steel spheres D. 617 Z632R Steel torsion spring18 Z637R Pin. D. 04x75 mm, (1 piece)19 Z640R Plate below lock for standard key

Z4513R Plate below lock for Security Lock key20 Z641NR Hinge black21 Z648 Cylinder spring22 Z643R Lock set element red, 1 pcs.23 Z644R Opening push button, red, 1 pcs. (for top-case V46)24 Z647R Torsion spring, 1 pcs.


E PAR

TS &

DIS

PLAY

S

B33NMK / B33NML

ZB33CNM B33 assembled top-shell black

ZB33FNMKM B33NMK MONOKEY® assembled bottom-shell black

ZB33FNMLM B33NML MONOLOCK® assembled bottom-shell black

Z3007NM Mounted lock set5 Z3012R Closure system mounted on the lid7 Z599 Nylon stop bag opening yarn8 Z3001A900R Bottom frame for B33NMK MONOKEY®, silver8 Z3001NR Bottom frame for B33NML MONOLOCK®10 Z645R Push button red

10 Z1983R Push button red12 Z762NR Bolt, 1 pcs.13 Z191R Push button spring, 1 pcs.14 Z106 Bolt15 Z109 Long bolt springs16 Z790R Trim17 Z591R Pin. Medium, 2 pcs.18 Z140R Key locks with corresponding bush with red handle19 Z3006R Plate below lock, for standard key


220


B330 / B330 TECH

1

2

3

411

5

6

9

12

7

8

10

10 8

1 Z3420CNM B330 assembled Top ShellZ3420CNTM B330 TECH assembled Top Shell

2 Z3420FNM Fondo B330 assembled Bottom ShellZ3420FNTM Fondo B330 TECH assembled Bottom Shell

3 Z3421R Red reflectors (for B330)Z3421FR Smoked reflectors (for B330 TECH)

4 Z2751NM Lock setZ2751NTM Lock set for Tech version

5 Z3422R Central plate B3306 Z645R Push button red

Z645CR Opening push button chromed7 Z191R Push button spring, 1 pcs.8 Z115R Stop bag opening yarn, 2 pcs.9 Z762NR Bolt, 1 pcs.10 Z590R Pin. Medium, 2 pcs.11 Z140R Key locks with corresponding bush with red handle




E PAR

TS &

DIS

PLAY

S

B32 BOLD

1

4

2

3 9

10

5

6

8

7

1 ZB32CNM B32 assembled Top Shell2 ZB32FNM B32 assembled Bottom Shell3 Z2751NM Lock set4 ZB32PV Painted plate with chromed GIVI logo5 Z645R Push button red6 Z191R Push button spring, 1 pcs.

7 Z115R Stop bag opening yarn, 2 pcs.8 Z762NR Bolt, 1 pcs.9 Z140R Key locks with corresponding bush with red handle10 Z3006R Plate below lock, for standard key


222


E300 / E300 TECH / E300B / E300N2 / E300NT2

1 Z32CNM E300N assembled top-shell blackZ32CBM E300B assembled top-shell whiteZ32CNTM E300 Tech assembled top-shell black

2 Z29FNM E280 - E300N - E300B bottom-shell blackZ2900FNM E300N2 bottom shellZ2900FNTM E300NT2 bottom shell

3 Z1732SR Central reflector for E300N, E300N2

Z1732FSR Central reflector smoked for E300B, E300 TECH, E300NT2

4 Z314NM Hinge stop for E300NZ2901NM Hinge stop (for E300N2)Z2901NTM Hinge stop (for E300NT2)

5 Z140R Key locks with corresponding bush with red handle6 Z310 Bolt for E300N / E300NT / E300B

Z762NR Bolt, 1 pcs. for E300N2 / E300NT27 Z112R Red pulley, 4 pcs.8 Z115R Stop bag opening yarn, 2 pcs.9 Z193 Hinge pin 62 mm10 Z191R Push button spring, 1 pcs.11 Z315 Push button for E300N

Z315NR Push button silver for E300NT / E300BZ645R Push button red for E300N2

15 Z243 Key lock plate for E300N / E300NTZ4513R Plate below lock for Security Lock key

Z640R Plate below lock for standard key for E300N2 / E300NT2

16 Z2000R Chromed GIVI logo


E PAR

TS &

DIS

PLAY

S

B27NMAL

1 ZB27FNM B27N assembled Bottom-shell2 ZB27CNM B27N assembled top-shell black3 Z2750R Reflector + below reflector for B27N4 Z2751NM Lock set5 Z762NR Bolt, 1 pcs.6 Z191R Push button spring, 1 pcs.

7 Z115R Stop bag opening yarn, 2 pcs.8 Z645R Push button red9 Z140R Key locks with corresponding bush with red handle10 Z3006R Plate below lock, for standard key


224


B29N / B29NT

1

2

3

3

4

5

6

9

7

8

10

11

8

12

12

1 Z291CNM B29N assembled top-shell blackZ291CNTM B29NT assembled top-shell

2 Z29FNM B29N bottom-shell blackZ29FNTM B29NT assembled bottom shell

3 Z2911R Red reflectors (for B29N)Z2911FR Smoked reflectors (for B29NT)

4 Z314NM Hinge black, mountedZ314NTM B29NT hinge

5 Z2910R B29 central plate

6 Z315 Red push buttonZ315NR Black push button

7 Z115R Stop bag opening yarn, 2 pcs.8 Z112R Red pulley, 4 pcs.9 Z310 Bolt10 Z140R Key locks with corresponding bush with red handle

Z140NR Key locks with corresponding bush with black handle11 Z243 Key lock plate12 Z193 Hinge pin 62 mm


E PAR

TS &

DIS

PLAY

S

CY25N

1 Z1730TR Reflector, for CY25N2 Z1734R Locking system, complete

3 Z140R Key locks with corresponding bush with red handle

CY14N

1 Z3101TR Reflector with graphic bottom2 Z3102R Below lock

3 Z140R Key locks with corresponding bush with red handle

226


WINGRACK

1 Z132DX Wingrack 2 side support (right)2 Z131DX Wingrack 2 fin (right)2 Z131SX Wingrack 2 fin (left)

5 Z145DX Wingrack direction indicator (1piece) (right)5 Z145SX Wingrack direction indicator (1piece) (left)6 Z231 Direction indicator lens for Z145

STOP LIGHT KIT / REMOTE CONTROL

1 Z1081 Spare top-shell contact for stop light2 Z1089 Spare contact between top and bottom shell3 Z880 Plate contact with wire for stoplight kit

4 Z995M Spare part between bottom-shell and plate

6 Z2109R Three point contact for top-case bottom, for remote control


E PAR

TS &

DIS

PLAY

S

PLATES

3 Z113C2 Plate + cover plate + MONOLOCK® kitZ113-2 Spare plate for universal MONOLOCK® plate

4 Z114 Cover plate for Z1135 Z340 Aluminium plate for MONOLOCK® MM

6 Z230 Aluminium upper plate for MONOKEY® 2 and Wingrack

7 Z255 Nylon upper plate for Monorack 38 Z410 MONOLOCK® kit for plate Z402

9 Z668 Spare plate for M5 plate complete with rubbers, anti theft caps and side emblems

10 Z669 Spare plate for M5M plate complete with rubbers, anti theft caps and side emblems

11 Z621R Hole covering caps for M5, M7, M5M, M6M plates (6 pcs)

12 Z4400R Plate for E25113 Z4401R Cover Plate for E251

M5KITR Bolts and screws kit M5, M7, M5M, M6M

ACCESSORIES SPARE SPARTS (TOLL PAYING DEVICES HOLDER, GPS-HOLDERS, SPOTLIGHTS, ENGINE GUARDS,CHILD’S SEAT BABY RIDE, JERRY CAN)

1 - S310 Z2256 Pair of halogen bulbs replacement 12V 55W H3 for spotlights S310

1 - S310 Z2257 Pair of halogen bulbs replacement 12V 35W H3 for spotlights S310

2 - S310 Z2310R Relay for S310

3 - TN_ _ _ Z2159R Pair of crash pads with GIVI logo for TN_ _ _ engine guards

4 - S310-S320 Z2125M Pair of clamps to fix the S310 or S320S310-S650 Z1977R Mounting kit for S6505 - S310 Z2311R Switch for S310

6 - S602 Z1325MAdhesive tap for the fitting of the motorway toll paying device holder S602 on the motorcycle (complete with biadhesive)

S951B-S952B-S953B-S954B-S955-S956B-S957B

S951BKITR Replacement fitting system for S95_B

7 - SRA_ _ _ Z2309R Support hooks with screws for SRA…

8 - TAN01 Z8732 Red cap with seal for cannister TAN01S410 Z9136-2R WheelsS410 Z9135R HandleS410 Z9144R Plate release systemS150 Z9520KITR Caps for universal rack S150TM419-TM420 ZTM419KIT Fitting kit for hand protectors: TM419-TM420

S250 Z9189R Assembled top-shellS250 Z9186R Assembled bottom-shellS250 Z726R Lock liningS250 Z9191R Internal removable divider

228


PLATES / WINGRACK / SRA / 1000F

1 Z126 Rubbers for plates M5, M5M, M6M, Z113, M3, M35

1 Z126A Rubbers (with increased height) for plates M5, M5M, M6M, Z113, M3, M35

2 Z896 1 set joint Monorack 353 Z890 1 joint set for Monorack 2/3/MM4 E115F Junction kit bag luggage for Monorack5 E115F2 Junction kit bag luggage for Monorack 2/46 Z124 Bag case attachment clamps7 Z125 Bag case attachment support hooks spacer (2pcs)8 Z128 Complete kit for plastic boss for Wingrack9 Z1532 Round Logo for M5-M5M Plate

10 Z2710Set of 4 pcs rubber cushions (with concentric circles) for M7, E251, SRA…, M8A, M8B (for SRA it is necessary to verify the type of rubber cushion installed)

10 Z2710ASet of 4 pcs rubber cushions (with concentric circles and increased height) for M7, E251, SRA…, M8A, M8B (for SRA it is necessary to verify the type of rubber cushion installed)

11 Z252C s Aluminium clamp for 1000F12 Z2309R Support hooks with screws for SRA, M8A, M8B

Z113-2 Spare plate for universal MONOLOCK® plate

Z113C2 Spare plate for universal MONOLOCK® plate complete with cover plate and universal fitting Kit

Z9571RSet of 4 pcs flat rubber cushions with plastic base for plates M9A, M9B, SRA… (for SRA it is necessary to verify the type of rubber cushion installed)

PL / PLX / PLR / PLXR / PL_CAM / PLR_CAM

1 Z221 Spare rubber cap for tubular side-case holder, 1 piece

2 Z670 Screw cap for hook for side-case holder, 1 piece3 Z124 Bag case attachment clamps4 Z125 Bag case attachment support hooks spacer (2pcs)

5 Z2711R Key for PLXR and PLR6 Z2304R Set of components for PL…. CAM / PLR….CAM

DLM36KIT Spare parts mounting kit to mount DLM36 on PL/PLR


E PAR

TS &

DIS

PLAY

S

SPARE SPARTS - SOFT BAGS

T405-T411-T413-T435 Z1246 Clips medium

T405-T411-T421-T427-T431

ZT405B Safety belts with double spring-clip, 2 pcs.

T432 ZT432A Rain cover for T432T435 ZT435A Rain cover, 1 pcs.

ZT435B Adhesive hook and loop fastener (rough side), 2 pcs.T460B ZT460B Kit of two belts with male clipsTANKLOCK ZT480F Nylon flange for fixing the bags

ZT480R Replacement flange for bagsXS306-XS307-XS308-XS311-XS312

ZXS01 s Tablet-holder XS306, XS307, XS308, XS311, XS312

EA100-EA100B ZEA100RC Pair of rain cover for side bags: EA100-EA100B

EA100-EA100B ZEA100PPB Stiffening strips for saddlebags EA100-EA100B

EA101-EA101B ZEA101RC Pair of rain cover for side bags: EA101-EA101B

EA102-EA102B ZEA102RC Rain cover for tank bags: EA102-EA102B

EA103-EA103B ZEA103RC Rain cover for tank bags: EA103-EA103B

EA105-EA105B-EA105GR

ZEA105RC Rain cover for tunnel bags: EA105-EA105B-EA105GR


ZEA105BE Fixing belt for tunnel bags: EA105-EA105B-EA105GR

EA106-EA106B ZEA106RC Rain cover for small size tank bags: EA106-EA106B


ZEA107RC Rain cover for seat roll bags: EA107-EA107B-EA107GR

EA110-EA110B ZEA110RC Rain cover for enduro tank bags: EA110-EA110B

EA110-EA110B ZEA110BA Fitting base for enduro tank bags: EA110-EA110B

EA110-EA110B ZEA110BE Belts for the direct fixing to the motorcycle

EA112-EA112B ZEA112RC Rain cover for tank tablet holders: EA112-EA112B

EA116 ZEA116RC Rain cover for tank bag: EA116EA116 ZEA116BA Fitting base for tank bag: EA116EA117 ZEA117RC Rain cover for tank bag: EA117EA118 ZEA118RC Rain cover for tank bag: EA118EA124 ZEA124RC Rain cover for rucksack: EA124

XS305 ZXS305RC Rain cover for XS305XS307-XS312 ZXS307RC Rain cover for tank bags: XS307-XS312

XS310BB ZXS310RC Rain cover for cargo bag: XS310BBXS313 ZXS313RC Rain cover for saddle bag: XS313XS316 ZXS316RC Rain cover for saddle bag: XS316XS318 ZXS318RC Rain cover for tunnel bag: XS318XS318 ZXS318BE Pair of fixing belt for tunnel bag: XS318XS319 ZXS319RC Rain cover for tank bag: XS319XS320 ZXS320RC Rain cover for XS320ST601 ZST601RC Pair of rain cover for bags: ST601ST602-3D603 ZST602RC Rain cover for tank bags: ST602-3D603

ST603-3D604 ZST603RC Rain cover for tank bags: ST603-3D604

ST605 ZST605PH Waterproof mobile phone holder for tank bag: ST605ST607 ZST607RC Rain cover for saddle bag: ST607ST608 ZST608RC Rain cover for leg bag: ST608MT501 ZMT501RC Pair of rain cover for bags: MT501MT502 ZMT502RC Rain cover for saddle bag-rucksack: MT502MT504-MT505 ZMT504RC Rain cover for tank bags: MT504-MT505

UT809 ZUT809IB Removable inner lining for tank bag: UT809UT810 ZUT810IB Removable inner lining for tank bag: UT810UT809-UT810 ZUT810MH Waterproof map / tablet holder for tank bags:

UT809-UT810GRT702 ZGRT702BE Pair of belts with red clips GRT702GRT709 ZGRT709IB Removable inner lining for side bag: GRT709

GRT709 ZGRT709FS Fixing system for fastening the GRT709 to a tubular side holder

GRT709 ZGRT709MS M.O.L.L.E. fasteners for side bag: GRT709GRT710 ZGRT710SH Waterproof mobile phone holder for pouch: GRT710GRT711 ZGRT711IB Removable inner lining for rucksack: GRT711GRT711 ZGRT711BB Bag to carry boots for rucksack: GRT7113D600 Z3D600RC Pair of rain cover for bags: 3D6003D600 Z3D600LO Padlock with combination lock for bags: 3D600S952-S952B ZS952RC Rain cover for GPS - smartphone holder: S952-

S952BS953-S953B ZS953RC Rain cover for GPS - smartphone holder: S953-

S953BS954-S954B ZS954RC Rain cover for GPS - smartphone holder: S954-

S954BS955-S955B ZS955RC Rain cover for smartphone holder: S955-S955B

S956B ZS956RC Rain cover for smartphone holder: S956BS957B ZS957RC Rain cover for smartphone holder: S957B

SPARE SPARTS - AIRFLOW

1 Z1997R Replacement sliding screen for Airflow 2 Z1963R Airflow guide latch spare parts

SPARE SPARTS - AIRSTAR

Z1694R Internal and external brackets for D40 D40 Kit for universal Airstar with 2 fixing points

230


DISPLAY

Z6015 s Display for 7/8 soft bags 1 Z6019 GIVI Carpet SIZES: 135 x 200 cm

Z6019P GIVI Carpet SIZES: 60 x 40 cm 2 Z6029 s Display in cardboard for various accessories 6 Z6041 s Display rack for Airflow windshield, complete with the AF330 windshield for BMW R1200GS (04-10).

Z6043BA Support for MONOLOCK® and MONOKEY® cases, for slat wallsZ6043BMR Support for soft bags, red, for slat wallsZ6043SP Support for screens and spoilers, for slat wallsZ6043VA Support for MONOLOCK® lateral cases, for slat wallsZ6043V35 Support for V35 MONOKEY® SIDE lateral cases, for slat wallsZ6043CAM Support for Trekker Outback MONOKEY® CAM-SIDE lateral cases, for slat walls

7 Z6043EA Bench or slat walls display, for TANKLOCK tank bags8 Z6048 Display for three Trekker cases / equipped with lateral holder and MONOKEY® plate

Z6048EKIT Kit for mounting a right lateral Easylock bag 3D600, on the display Z6048Z6048CAMKIT Kit for mounting a side-case MONOKEY® CAM-SIDE, Trekker Outback, on the display Z6048Z6049 s Metal wall frame, grey, with brackets for rear graphic rear banner Z6049TG (to be ordered separatly)Z6049BM s Support for soft bagsZ6049SP s Support for spoilerZ6049TL s Support for TANKLOCK tank bagsZ6049CA s Support for helmetZ6049TG s Rear Graphics bannerZ6049DEP s Brochure HolderZ6049CAM s Kit for mounting a side-case MONOKEY® CAM-SIDE, Trekker Outback, on the display Z6049

13 Z6054 Wall display to be combined with supports; Z6043BA, Z6043BMR, Z6043SP, Z6043VA, Z6043V35, Z6043CAM, Z6043EA, Z6043SZ6043S Double hook to hang on a display wall packaged accessories with a European style hanging Z6043E142B Support to display the small metal E142B on slat walls or on Z6054Z6043EH1110 Support to display the extension hand protectors EH1110, left side, on slat walls or on Z6054Z6043EX1SRA Support to display the extendable bag holder EX1SRA on slat walls or on Z6054Z6043HP4103 Support to display the hand protectors HP4103, left side, on slat walls or on Z6054 Z6043MG4103 Support to display the mudguard MG4103 on slat walls or on Z6054Z6043PH5108 Support to display the engine head protector PH5108, right side, on slat walls or on Z6054Z6043PR5108 Support to display the radiator guard PR5108 (one side) on slat walls or on Z6054Z6043RP6403 Support to display the oil carter protector RP6403 on slat walls or on Z6054Z6043SRA5116 Support to display the rear rack in aluminium SRA5116 on slat walls or on Z6054Z6043TB2013 Support to display the backrest TB2013 on slat walls or on Z6054Z6043TN5108OX Support to display the engine guard TN5108 or TN5108OX, right side, on slat walls or on Z6054Z6043S650 Support to display the child’s seat S650 on slat walls or on Z6054

10 Z6051 s Display for screens and spoilers in Skin Pack version11 Z6052 Vertical display in metal for 6 TANKLOCK bags12 Z6053 s Shop-desk display for 6 GIVI Side Stand Extensions ES_ _ _

Z6044 Rotating floor display with a triangular column made of plastic material.Z6057 Graphic Forex double sided hanging display sign for use in stores with the Givi logo on both sides

Z6048CAR Support for mounting a graphics banner onto display Z6048. To be combined with display Z6048 and graphics banners Z6048CDLM or Z6048CTRK or Z6048COBK

Z6048CDLM Trekker Dolomiti graphics banner. To be combined with support Z6048CAR and display Z6048Z6048CTRK Trekker graphics banner. To be combined with support Z6048CAR and display Z6048Z6048COBK Trekker Outback graphics banner. To be combined with support Z6048CAR and display Z6048Z6048DLME Display stand for 3 Trekker Dolomiti cases. Equipped with specific pannier holder, MONOKEY® plate and graphics banner with supportZ6048TRKE Display for 3 Trekker cases. Equipped with specific pannier holder, MONOKEY® plate and graphic banners with supportZ6048OBKE Display for 3 Trekker Outback cases. Equipped with specific pannier holder, MONOKEY® plate and graphics banner with supportZ6058U Display stand for Ultima-T range of soft bags. Equipped with Ultima-T graphics bannerZ6058G Display stand for Gravel-T range of soft bags. Equipped with Gravel-T graphics bannerZ6060 Display for 3 MONOKEY®/ 3 MONOLOCK® topcases. Dimensions: (H x W x D) 215 x 50 x 50 cm

TAPPETO GIVIDimensioni: (H x L) 135 x 200 cm / 40 x 60 cm

Cod: Z6019 / Z6019P

ESPOSITORE PERPARABREZZA AIRFLOWComprensivo diparabrezza AF33Oper BMW R1200GS13>14

Cod: Z6041s

180 cm

32 cm

Cod: Z6044ESPOSITORE GIREVOLEPORTA GPSDimensioni: (H x L) 180 x 32 cm

Cod: Z6051 s

ESPOSITORE PERVETRI E CUPOLINI IN VERSIONE SKIN PACK Dimensioni: (H x L)170 x 70 cm

170 cm

70 cm


E PAR

TS &

DIS

PLAY

S

Cod: Z6052

ESPOSITORE PER 6 BORSE TANKLOCKDimensioni: (H x L x P) 200 x 80 x 70 cm

200 cm

70 cm

80 cm220 cm

35 cm

65 cm

Cod: Z6058G

ESPOSITORE PER GRAVEL-TDimensioni: (H x L x P) 220 x 65 x 35 cm

Cod: Z6058U

ESPOSITORE PER ULTIMA-TDimensioni: (H x L x P) 220 x 65 x 35 cm

220 cm35 cm

65 cm

90 cm

40 cm

55 cm

EXPLORE. ENJOY.

TREKKER DOLOMITI

46 lt10 kg460

340

410

DLM46ATOP CASE

46 LTRTOP CASE

30 LTRSIDE CASES

36 LTR

DLM30A DLM36PACK210 kg

495

379

24236 lt10 kg

460

240

41030 lt

ITITIT

Valigia MONOKEY® in alluminio naturale, 46 lt. Valigia MONOKEY® in alluminio naturale, 30 lt. Utilizzabile sia come top case (compatibile con tutte le piastre MONOKEY®), che come valigia laterale (compatibile con i telai laterali PL_ _ e PLR_ _).

Coppia di valigie in alluminio naturale 36 lt con chiave uguale, comprensive di un terzo cilindretto serratura con chiave uguale a quello delle due valigie.

ENENEN

MONOKEY® case in a natural aluminium finish, 46 ltr. MONOKEY® case in a natural aluminium finish, 30 ltr. Can be used as both a top case (compatible with all MONOKEY® plates), or as a side case (compatible with PL_ _ and PLR_ _ side frames).

Pair of 36 ltr cases in a natural aluminium finish provided with a matching third lock barrel.

FRFRFR

Top case MONOKEY®, en aluminium naturel, 46 litres. Top case MONOKEY®, en aluminium naturel, 30 litres. Peut être utilisé à la fois comme top case (compatible avec toutes les platines MONOKEY®), ou comme valise latérale (compatible avec les supports PL_ _ et PLR_ _).

Paire de valises aluminium, 36 litres, plus un troisième barillet, toutes avec la même clef.

ESESES

Maleta central MONOKEY® en aluminio natural, 46 lt. Maleta MONOKEY® en aluminio natural, 30 lt. Utilizable ya sea como maleta central (compatible con todas las parrillas MONOKEY®), que como maleta lateral (compatible con los soportes laterales PL_ _ y PLR_ _).

Pack de maletas laterales en aluminio natural, 36 lt, con la misma llave, comprensivo de un tercer bombín con la misma llave de las dos maletas.

DEDEDE

MONOKEY® Topcase in Alu-natur, 46 L. Volumen. MONOKEY® Koffer in Alu natur, 30 L. Kann sowohl als Topcase (kompatibel mit allen MONOKEY® Platten) oder als Seitenkoffer (kompatibel mit PL_ _ und PLR_ _ Seitenträgern) verwendet werden.

Aluminium natur Koffersatz mit jeweils 36 L. Fassungsvermögen. Inklusive 3. Schloß zum Einbau in ein alternatives Topcase, um alle 3 Koffer gleichschliessend zu haben.

.

EXPLORE. ENJOY.

TREKKER OUTBACK

OBK58_TOP CASE

58 LTRTOP CASE

42 LTRSIDE CASES

48/37 LTR

OBK42_ OBK37_/ OBK48_

ITITIT

Valigia MONOKEY® in alluminio naturale, 58 lt. offre la possibilità di stivare due caschi integrali o modulari al suo interno.Disponibile versione black line.

Valigia MONOKEY® in alluminio naturale, 42 lt. offre la possibilità di stivare un casco integrale o modulare al suo interno.Disponibile versione black line.

Valigia laterale in alluminio naturale, 48 o 37 lt. Dotata del sistema di aggancio MONOKEY® Cam-Side, meccanismo di aggancio in alluminio pressofuso e inserti in tecnopolimero rinforzato. Compatibile con i portavaligie laterali tubolari PL_ _CAM, PLR_ _CAM. Disponibile versione black line.ENENEN

MONOKEY® top-case in a natural aluminium finish, 58 ltr offers the capacity to store either two full-face or two modular helmets.Black line version also available.

MONOKEY® top-case in a natural aluminium finish, 42 ltr offers the capacity to store either one full-face or one modular helmet.Black line version also available.

Natural aluminium side-case, available in 48 or 37 ltr in die case aluminium and with reinforced technopolymer inserts. Equipped with the MONOKEY® Cam-Side fitting system and to be used with the PL_ _CAM, PLR_ _CAM tubular side-case holders. Black line version also available.FRFRFR

Top case MONOKEY®, en aluminium naturel, 58 litres, offre la possibilité de ranger 2 casques modulables à l’intérieur.Version black line disponible.

Top case MONOKEY®, en aluminium naturel, 42 litres, offre la possibilité de ranger un casque intégral ou modulable à l’intérieur. Version black line disponible.

Valises latérales aluminium naturel, 48 ou 37 litres. Équipées du nouveau système MONOKEY® Cam-Side: il faut utiliser les supports suivants PL_ _CAM, PLR_ _CAM. Version black line disponible.

ESESES

Maleta central MONOKEY® en aluminio natural, 58 lt. ofrece la posibilidad de guardar dos cascos integrales o modulares en su interior. Disponible versión black line.

Maleta central MONOKEY® en aluminio natural, 42 lt, ofrece la posibilidad de guardar un casco integral o modular en su interior. Disponible versión black line.

Maleta lateral en aluminio natural, 48 o 37 lt. Dotada del nuevo sistema de fijación MONOKEY® Cam-Side, mecanismo de fijación en aluminio fundido a presión e inserciones en tecno polímero reforzado. Compatible con los portamaletas laterales tubulares PL_ _ CAM, PLR_ _CAM. Disponible versión black-line.DEDEDE

MONOKEY® Topcase aus Aluminium natur, 58 L. Volumen kann zwei Integral- oder Modularhelme aufnehmen.Auch in schwarz verfügbar.

MONOKEY® Topcase aus Aluminium natur, 42 L. Volumen kann einen Integral- oder Modularhelm aufnehmen.Auch in schwarz verfügbar.

Seitenkoffer aus Alu natur, 48/37 L. Ausgestattet mit den Befestigungssystem MONOKEY® Cam-Side, Mechanismus aus Druckguss-Aluminium und Einsätze aus verstärktem Technopolimer. Kompatibel mit dem Seitenträger PL_ _CAM, PLR_ _CAM. Auch in schwarz verfügbar.

10 kg 48 lt495

387

306

10 kg 37 lt495

387

24610 kg 42 lt

409

323

45410 kg 58 lt

555

323

454

EXPLORE. ENJOY.

TREKKER

TRK52_TOP CASE

52 LTRSIDE CASE

46 LTRSIDE CASE

33 LTR

TRK46_ TRK33_

ITITIT

Valigia 52 lt con sistema di fissaggio MONOKEY® nera con finitura in alluminio anodizzato. Consente l’alloggiamento di due caschi modulari. Disponibile versione black line. ATTENZIONE: non può essere agganciata alle piastre dotate di contatto kit luci stop.

Valigia MONOKEY® 46 lt nera con finitura in alluminio anodizzato dotata di sportello di apertura superiore. Può essere montata anche in versione top-case. Disponibile versione black line. ATTENZIONE: non può essere agganciata alle piastre dotate di contatto kit luci stop.

Valigia MONOKEY® 33 lt nera con finitura in alluminio anodizzato dotata di sportello di apertura superiore. Può essere montata anche in versione top-case. Disponibile versione black line. ATTENZIONE: non può essere agganciata alle piastre dotate di contatto kit luci stop.ENENEN

52 ltr black top-case with anodized aluminium finish and the MONOKEY® fixing system. Black line version also available. ATTENTION: cannot be fitted onto plates with an installed electrical contact for a stop light kit.

46 ltr black side-case with anodized aluminium finish and top opening can also be mounted as a top-case. Black line version also available. ATTENTION: cannot be fitted onto plates with an installed electrical contact for a stop light kit.

33 ltr black side-case with anodized aluminium finish and top opening. Can also be mounted as a top-case. Black line version also available. ATTENTION: cannot be fitted onto plates with an installed electrical contact for a stop light kit.FRFRFR

Valise noire MONOKEY® 52 litres avec finition en aluminium anodisé. Il permet le rangement de deux casques modulables. Version black line disponible. ATTENTION: ne peut pas être fixée sur les platines dotées des contacteurs du kit feux stop.

Top case/valise noir, MONOKEY® 46 litres avec finition en aluminium anodisé, et trappe d’ouverture supérieure. Version black line disponible. ATTENTION: ne peut pas être fixée sur les platines dotées des contacteurs du kit feux stop.

Top case/valise noir, MONOKEY® 33 litres avec finition en aluminium anodisé, et trappe d’ouverture supérieure. Version black line disponible. ATTENTION: ne peut pas être fixée sur les platines dotées des contacteurs du kit feux stop.ESESES

Maleta central 52 lt con sistema de fijación MONOKEY® negra con acabados en aluminio anodizado. Permite el alojamiento de dos cascos modulares. Disponible versión black line. ATENCION: No puede ser montada sobre una parrilla dotada de contacto para kit luz stop.

Maleta MONOKEY® 46 lt negra con acabado en aluminio anodizado dotada de una ventanilla de apertura superior. Utilizable ya sea como maleta central o como lateral. Disponible versión black line. ATENCION: No puede ser montada sobre una parrilla dotada de contacto para kit luz stop.

Maleta MONOKEY® 33 lt. negra con acabado en aluminio anodizado dotada de ventanilla de apertura superior. Utilizable ya sea como maleta central o como lateral. Disponible versión black line. ATENCION: No puede ser montada sobre una parrilla dotada de contacto para kit luz stop.DEDEDE

Trekker Koffer MONOKEY® 52 L., schwarz mit eloxiertem Alu beschichtetem Deckel. Er nimmt problemlos 2 Modularhelme auf. ACHTUNG: der Koffer kann auf Platten, auf denen der Kontakt für das Bremslicht Kit befestigt ist nicht montiert werden. Auch in schwarz verfügbar.

Trekker Koffer MONOKEY® 46 L. schwarz mit eloxiertem Alu beschichtetem Deckel. Das Ein- und Ausladen ist einfach und schnell möglich ohne das Gepäck umräumen zu müssen. ACHTUNG: der Koffer kann auf Platten, auf denen der Kontakt für das Bremslicht Kit befestigt ist nicht montiert werden. Auch in schwarz verfügbar.

Trekker Koffer MONOKEY® 33 L. schwarz mit eloxiertem Alu beschichtetem Deckel. Das Ein- und Ausladen ist einfach und schnell möglich ohne das Gepäck umräumen zu müssen. ACHTUNG: der Koffer kann auf Platten, auf denen der Kontakt für das Bremslicht Kit befestigt ist nicht montiert werden. Auch in schwarz verfügbar.

10 kg 52 lt600

460

31510 kg 46 lt

526

411

31010 kg 33 lt

526

411

230

Z6048CDLM

Z6048COBK

Z6048CTRK

Cod: Z6048

ESPOSITORE PER 3 VALIGIE TREKKER Dimensioni: (H x L x P) 90 x 40 x 55 cm

ESPOSITORE PER 3 MONOKEY®

o 3 MONOLOCK®

Dimensioni: (H x L x P) 215 x 50 x 50 cm

215 cm

50 cm

50 cm

Cod: Z6060

221,5 cm

122 cm

Cod: Z6054T

PARETE DOGATA AUTOPORTANTE CON MONITOREspositore autoportante che simula una parete dogataDimensioni: (H x L) 221,5 x 122 cm

232


GIVI DESIGN SERVICE

The many features of GIVI products find their ideal setting in a display project designed to be in line with the Company’s image.To better support dedicated retailers like you, GIVI is putting at your disposal our in-house design team, offering you the possibility to have expert and reliable hands setting up the point of sale space in your retail point. How does it work? Contact your local agent to take advantage of this service. He will coordinate with the Sales Direction to start the process.Once approved, you will be requested to send us the floor plan of your shop, with an indication of the area you want to dedicate to GIVI and possibly some detailed images.Following your input, our GIVI DESIGN SERVICE will then create a project proposal and send you a presentation, along with the cost estimate, the contract proposal and an indication of the products to be displayed.

EXAMPLE OF DESIGN


E PAR

TS &

DIS

PLAY

S

NOTE

234


NOTE


E PAR

TS &

DIS

PLAY

S

Appl

icatio

n Ch

art_

Febr

uary

201

9

HEADQUARTERS:GIVI S.p.A. _Flero (BS) Italy Fax +39 030 35 80 518 [email protected] _www.givi.it

BRASIL:GIVI DO BRASIL LTDA Ph. +55 12 3644 8025 _Fax +55 12 3644 8029 [email protected] _www.givi.com.br

FRANCE:GIVI CONCESS. FRANCE Ph. (04) 72 25 79 41 _Fax (04) 72 25 03 73 [email protected] _www.givi.fr

GERMANY:GIVI DEUTSCHLAND GmbH Ph. (0) 911 955100 _Fax (0) 911 9551022 [email protected] _www.givi.de

MALAYSIA:GIVI ASIA SDN BHD Ph. (603) 6028 3800 _Fax (603) 6028 1300 [email protected] _www.givi.com.my

SPAIN:GIVI CONCESSIONAIRES IBERICA S.L.U.Ph. (93) 8906820 _Fax (93) 8906202 [email protected] _www.givi.es

UK:GIVI UK LTD Ph. (01327) 706220 _Fax (01327) 706239 [email protected] _www.givi.co.uk

USA:GIVI USA INCEast Coast _Ph. (704) 679 4123West Coast _Ph. (775) 359 [email protected] _www.giviusa.com

VIETNAM:GIVI VIETNAM CO. LTD.Ph. +84 72 3769137 _Fax +84 72 [email protected] _www.givi.com.vn

INDONESIA:PT GIVI INDONESIAPh. +6221 7588 2582 _Fax +6221 7588 [email protected] _ www.givi.co.id

CHINA:DONGGUAN GIVI TRADING CO. LTD.Ph. + 86 769 22992660 _Fax+86 769 [email protected] _ www.givimoto.com

bags and technical equipment - Bikemate.net

Documents

Transcript of bags and technical equipment - Bikemate.net