Audio & Video

46
67 Audio & Video

Transcript of Audio & Video

67

Audio & Video

www.dragnetweb.comSECTION 2

WINDSHIELDS & FAIRINGS

HANDLEBARS,CONTROLS

& MIRRORS

CABLES

BRAKES

TANKS & OIL FILTERS

DASHES & GAUGES

FRAMES & SUSPENSION

FENDERS & LICENSE

PLATE FRAMES

FOOTRESTS

WHEELS & AXLES

HARDWARE, COVERS & GENERAL

ELECTRICAL

LIGHTING

FUEL/AIR SYSTEMS

ENGINE

TRANSMISSION & DRIVELINE

GASKETS & SEALS

AUDIO & VIDEO

SADDLEBAGS & LUGGAGE

SEATS & SISSY BARS

EXHAUST

All part numbers in BLUE are new for 2017.68

“HOG-POD” FLHT/ FLHX DASH TRIM/ TWEETER POD•Complete add-on tweeter kit•Doubles as a fairing accent piece with decorative chrome trim (included)

•Pod comes “satin black” to match stock inner fairings (as shown)•Disassembles easily to paint-match custom-painted fairings•Black “see through” grilles can also be painted, chromed•Second set of cloth covered grilles included•Works with all Hogtunes speaker systems, 98-13 stock systems or bikes with aftermarket car radios

•Includes custom-designed 50 watt (RMS) high-efficiency metalized dome tweeters with 3rd order (18 dB) passive crossovers

•Radically improves clarity and performance of your audio system•All mounting hardware, drilling template and plug-and-play wiring is included in box

NOTE: U.S. Patent #D602,478.

PART # DESCRIPTION SUG. RETAIL4405-0172 For 98-13 FLHT/ FLHX/H-D FL Trike models $189.95

ROAD GLIDE TWEETER POD•Replaces factory speedo/ tach bezel to add 1” custom tweeters•Includes all plug-and-play wiring and metal mesh and cloth grilles for easy customizing

•Disassembles easily to paint-match custom-painted fairings•Custom-designed 50 watt (RMS) high-efficiency metalized dome tweeters with 3rd order (18 dB) passive crossovers

•Will work on 98-13 stock systems, amplified systems or aftermarket car radios

•For 98-05 models, an amp is recommended for best sound quality

NOTE: U.S. Patent #D638,407.

PART # DESCRIPTION SUG. RETAIL4405-0205 For 98-13 FLTR/ FLTRU models $199.95

AMP/ SIX SPEAKER KIT FOR 14-17 TWIN-COOLED™ MODELS•Includes front and rear speakers, fairing lower speakers, easy-to-install lower adapters and amplifier (PART #4405-0344)

•Lower adapters provide easy access to the coolant reservoir, come matte black and can be installed as is or sent out for paint

•The amplifier powers the front and lower speakers and the radio powers the rear speakers

•No radio reflash or dealer downloads required

•The kit includes all plug-and-play wiring and hardware to complete the installation

NOTE: PART #4405-0391 is required to install amp in 16-17 Road Glide Ultra.

NOTE: Not for use on CVO models with factory amplifiers installed.

WILD BOAR AUDIO 400 WATT AMP/ SPEAKER KIT•Features a plug-and-play, 200-watt 2-channel amplifier•Wild Boar Audio 6.5” 4-ohm speakers•Kit includes plug and play wire harness and instructions

NOTE: For best performance, a radio software reflash is required

PART # DESCRIPTION SUG. RETAIL4405-0406 For 14-17 FLHTCU/ FLHTK models $999.95

PART # DESCRIPTION SUG. RETAIL4405-0459 For 14-17 FLHX models $799.95

WINDSHIELDS & FAIRINGS

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS & OIL FILTERS

DASHES & GAUGES

FRAMES & SUSPENSION

FENDERS & LICENSE PLATE FRAMES

FOOTRESTS

WHEELS & AXLES

HARDWARE, COVERS & GENERAL

ELECTRICAL

LIGHTING

FUEL/AIR SYSTEMS

ENGINE

TRANSMISSION & DRIVELINE

GASKETS & SEALS

AUDIO & VIDEO

SADDLEBAGS & LUGGAGE

SEATS & SISSY BARS

EXHAUST

www.dragnetweb.com SECTION 2

All part numbers in BLUE are new for 2017.69

AMP/ FOUR SPEAKER KIT•Complete front and rear speaker kit with 200 watt 4-channel amp•Amp is set up for any software changes H-D may apply to radios in future•Includes Hogtunes NCA 450-RM amp and GEN3 – 6.5” front and rear speakers with grilles

•100% plug-n-play and includes all required hardware to complete installation•No radio reflash or dealer downloads required

NOTE: PART #4405-0391 is required to install amp in 16 Road Glide Ultra.

NOTE: Not for use on CVO models with factory amplifiers installed.

ROAD GLIDE ULTRA AMP/ SPEAKER KIT•Includes 160 watt 4-channel NCA 40.4 amp, 5” x 7” front speakers with new grilles, rear speakers, amp mount plate and 100% plug-and-play wire harness

•Compatible with tweeter pod PART #4405-0205

AMP/ FRONT AND REAR SPEAKER KIT•Includes GEN3 51/4” front and rear speakers and 200-watt, 4-channel amplifier•Upgraded 100% plug-n-play wire harness•Includes custom mounting “arms” to secure amp above radio•Comes with everything required to complete installation•Sold each

NOTE: Not compatible with CVO models with factory amplifiers installed.

AMP/6.5” SPEAKER KIT•Complete kit with 200-watt (RMS) two-channel amp and GEN3 front speakers

•Includes REV 200-RM amp and GEN3 – 6.5” front speakers•Requires no extra harnesses or factory software downloads•Includes Hogtunes model specific front metal mesh replacement grilles•Supplied amplifier mount plate is specific for Rushmore Road Glides•All required wiring, mounting plate and hardware to complete installation is included in the kit

PART # DESCRIPTION SUG. RETAIL4405-0353 For 14-17 FLHTCU/ FLHTK models $699.95

PART # DESCRIPTION SUG. RETAIL4405-0228 For 11-13 FLTRU and 98-13 FLTR w/ King Tour Paks and rear speaker boxes installed (PART #4405-0229) (except CVO) $599.95

PART # DESCRIPTION SUG. RETAIL4405-0339 For 00-13 FLHTK/ FLHTCU/I models $589.95

PART # DESCRIPTION SUG. RETAIL4405-0354 For 14-17 FLHX/ FLHXS models $429.95

PART # DESCRIPTION SUG. RETAIL4405-0376 For 15-17 FLTRX/ FLTRXS models $469.95

4405-0354 4405-0376

www.dragnetweb.comSECTION 2

WINDSHIELDS & FAIRINGS

HANDLEBARS,CONTROLS

& MIRRORS

CABLES

BRAKES

TANKS & OIL FILTERS

DASHES & GAUGES

FRAMES & SUSPENSION

FENDERS & LICENSE

PLATE FRAMES

FOOTRESTS

WHEELS & AXLES

HARDWARE, COVERS & GENERAL

ELECTRICAL

LIGHTING

FUEL/AIR SYSTEMS

ENGINE

TRANSMISSION & DRIVELINE

GASKETS & SEALS

AUDIO & VIDEO

SADDLEBAGS & LUGGAGE

SEATS & SISSY BARS

EXHAUST

All part numbers in BLUE are new for 2017.70

AMP/ FRONT SPEAKER KITS•Include GEN3 front speakers and 200-watt, 2-channel amplifier•Kit comes with everything required to complete installation•100% plug-n-play harness included•Sold each

NOTE: Not compatible with CVO models with factory amplifiers installed.

UNIVERSAL HANDLEBAR AUDIO KIT•Works on bikes, as well as UTVs, ATVs, golf carts, etc.•Includes a handlebar-mounted 50-watt amplifier with built-in Bluetooth® receiver/ controller

•Includes two custom speaker pods with dual 2” speakers•Dual speaker design keeps speakers on handlebars from being too big•All main components use supplied clamps that fit 7/8”, 1” or 11/4” handlebars•Main components are easily adaptable for custom installations•Amp/ controller has a additional wired auxiliary input for GPS, satellite radio, etc.•Amp/ controller features a high level audio output that can be used to add additional amplifiers

BLUETOOTH®-ENABLED SPEAKER SYSTEM KIT FOR MEMPHIS SHADES BATWING FAIRINGS•Includes custom “pod” with dual 4.25” speaker made to fit Memphis Shades Batwing fairings

•Includes a handlebar-mounted 50-watt amp with built-in Bluetooth® receiver/ controller

•Amp/ controller comes with mounting clamp that fits 7/8”, 1” or 11/4” handlebars

•Amp/ controller has an additional wired auxiliary input for GPS, satellite radio, etc.

•Amp/ controller features a “hi level” audio output that can be used to add additional amplifiers

•Measures approximately 1111/16” W x 51/4” T x 51/2” D

NOTE: Kit may not fit if gauges are riser-mounted.

SPEAKER SYSTEM KIT FOR MEMPHIS SHADES BATWING FAIRINGS•Includes custom “pod” with dual 4.25” speaker, 50 watt amp with USB charge port (1A max), audio perch with built-in volume control, a mini 3.5mm (1/8”) stereo audio cable and all required hardware and wiring

•Fits all Memphis Shades Batwing fairings

•Measures approximately 1111/16” W x 51/4” T x 51/2” D

NOTE: Kit may not fit if gauges are riser-mounted.

PART # DESCRIPTION SUG. RETAIL4405-0342 For 98-13 FLHT/ FLHX models (51/4” speakers) $399.95

PART # DESCRIPTION SUG. RETAIL4405-0343 For 98-13 FLTR/X models (5” x 7” speakers) $449.95

PART # DESCRIPTION SUG. RETAIL44050340 Universal Audio Kit $429.95

PART # DESCRIPTION SUG. RETAIL4405-0460 Bluetooth®-enabled speaker system kit for Memphis Shades Batwing fairings $429.95

PART # DESCRIPTION SUG. RETAIL4405-0218 Speaker system kit for Memphis Shades Batwing fairings $349.95

4405-03434405-0342

WINDSHIELDS & FAIRINGS

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS & OIL FILTERS

DASHES & GAUGES

FRAMES & SUSPENSION

FENDERS & LICENSE PLATE FRAMES

FOOTRESTS

WHEELS & AXLES

HARDWARE, COVERS & GENERAL

ELECTRICAL

LIGHTING

FUEL/AIR SYSTEMS

ENGINE

TRANSMISSION & DRIVELINE

GASKETS & SEALS

AUDIO & VIDEO

SADDLEBAGS & LUGGAGE

SEATS & SISSY BARS

EXHAUST

www.dragnetweb.com SECTION 2

All part numbers in BLUE are new for 2017.71

LOWER SPEAKER KIT•Complete kit with speaker adapters, grilles, 2 ohm speakers and all required wiring to go in fairing lowers on Twin-Cooled bikes

•Lower adapters provide easy access to the coolant reservoir, come in matte black and can be installed as is or sent out for paint

•Includes all required hardware and wiring to complete the installation

NOTE: Required amplifier is not included.

NOTE: PART #4405-0391 is required to install amp in Road Glide Ultra.

NOTE: Can be used on CVO models if factory amplifier is added to power them.

7” WOOFER KIT•Includes 2 ohm 7” woofers, grilles (not shown) and all required hardware

•Includes wire harness to plug into the rear channels of 450-AA, amp (4405-0388)

•Requires amplifier PART #s 4405-0338 or 4405-0341 (not included)•Requires FLHT-style vented fairing lowers

NOTE: An additional amp will be required if using rear speakers with this kit.

PART # DESCRIPTION SUG. RETAIL4405-0414 For 14-17 Limited Ultra Trike and

16-17 Road Glide Ultra $349.95

PART # DESCRIPTION SUG. RETAIL4405-0233 For 98-13 Dressers and H-D FL Trikes

(except 98-09 FLTR) $219.95

FAIRING LOWER SPEAKER KIT•For use on bikes with fairing lowers•Radio runs all existing speakers, and supplied amp runs fairing lower speakers•Includes Hogtunes 32 watt x 2 amp with MAXXBASS®, one pair of 51/4” Hogtunes speakers, fairing lower speaker adapters and plug-and-play harness

•Compatible with CVO Ultras

PART # DESCRIPTION SUG. RETAIL4405-0134 For 98-13 Dressers and H-D FL Trikes w/ FLHT-STYLE Original

Equipment fairings lowers (except 98-09 FLTR) $349.95

REAR SPEAKER PODS•Kit includes vinyl-covered rear speaker pods, grilles, mounting hardware and wire harness for PART #s 4405-0338 and 4405-0341

•Also include wiring for bikes with car radios•Holds Hogtunes 5.25” front or rear model speakers

NOTE: Supplied wiring will not plug into radio on FLHT/ FLHX and FLTR models. Amplifier, OEM harness or car radio is required. See PART #2120-0771 for more wiring options.

PART # DESCRIPTION SUG. RETAIL4405-0229 For 98-13 models w/ radio and King tour boxes $199.95

www.dragnetweb.comSECTION 2

WINDSHIELDS & FAIRINGS

HANDLEBARS,CONTROLS

& MIRRORS

CABLES

BRAKES

TANKS & OIL FILTERS

DASHES & GAUGES

FRAMES & SUSPENSION

FENDERS & LICENSE

PLATE FRAMES

FOOTRESTS

WHEELS & AXLES

HARDWARE, COVERS & GENERAL

ELECTRICAL

LIGHTING

FUEL/AIR SYSTEMS

ENGINE

TRANSMISSION & DRIVELINE

GASKETS & SEALS

AUDIO & VIDEO

SADDLEBAGS & LUGGAGE

SEATS & SISSY BARS

EXHAUST

All part numbers in BLUE are new for 2017.72

SPEAKER LID KIT WITH 6” X 9” SPEAKERS•Includes high-impact ABS replacement saddlebag lids, 200 watt-2 ohm motorcycle 6” x 9” speakers, grilles, gaskets, striker plates, grommets, wire harness and required hardware

•Disassembles easily for paint•Include custom rubber spacers to help fit most 6” x 9” car stereo speakers (speakers sold separately)•Included wire harness will plug into any current Hogtunes amp or other amp•Accepts OEM aftermarket latches

NOTE: Required amplifier is not included.

WILD BOAR AUDIO 6” X 9” SEPARATES•300 watt 4 ohm 6” x 9” •Made to fit Hogtunes HT LID-RM only (Part # 4405-0427)•Woofer cone is made of carbon fiber•Tweeter is 1.25” textile dome •Large vented magnet assembly •Custom external 2-way crossovers easily bolt to underside of Hogtunes lids

•Upgrade wire and connectors included

PART # DESCRIPTION SUG. RETAILFOR 14-17 FLHT/ FLHX/ FLHR/ FLTRX/ FLTRU MODELS W/ HARD SADDLEBAGS AND HOGTUNES LIDS, PART #S 4405-0393 OR 4405-04274405-0458 6” x 9” 250W speakers (pair) $449.95

4405-0393 4405-0289

4405-0366

IN-FAIRING BLUETOOTH® MUSIC CONTROLLER•Adds Bluetooth® capability through factory radio AUX input•Replaces factory ambient air temperature gauge•Easy plug-and-play installation•Additional input for satellite radio/ GPS, etc.•H-D accessory chrome rings fit perfectly •Backlights for easy viewing at night •Works with any radio that has 1/8” input •Ability to pair with up to nine wireless devices

PART # DESCRIPTION SUG. RETAIL4401-0203 For 99-13 FLHT/ FLHX/ FLTR/ FLTRU/ FLHTCUTG models $119.95

PART # DESCRIPTION SUG. RETAILFOR 14-17 FLHT/ FLHX/ FLHR/ FLTRX/ FLTRU MODELS W/ HARD SADDLEBAGS4405-0393 Speaker lid kit $599.95FOR 98-13 FLHT/ FLHX/ FLHR/ FLTR MODELS W/ HARD SADDLEBAGS4405-0289 Speaker lid kit 589.954405-0366 Repl. speakers (pr.) 229.95

PART # DESCRIPTION SUG. RETAILFOR 14-17 FLHT/ FLHX/ FLHR/ FLTRX/ FLTRU MODELS W/ HARD SADDLEBAGS4405-0427 Speaker lid kit $449.95FOR 98-13 FLHT/ FLHX/ FLHR/ FLTR MODELS W/ HARD SADDLEBAGS4405-0290 Speaker lid kit 399.954405-0366 Repl. speakers (pr.) 229.95

LIDS WITH SPEAKERS LIDS WITHOUT SPEAKERS

4405-0427

WINDSHIELDS & FAIRINGS

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS & OIL FILTERS

DASHES & GAUGES

FRAMES & SUSPENSION

FENDERS & LICENSE PLATE FRAMES

FOOTRESTS

WHEELS & AXLES

HARDWARE, COVERS & GENERAL

ELECTRICAL

LIGHTING

FUEL/AIR SYSTEMS

ENGINE

TRANSMISSION & DRIVELINE

GASKETS & SEALS

AUDIO & VIDEO

SADDLEBAGS & LUGGAGE

SEATS & SISSY BARS

EXHAUST

www.dragnetweb.com SECTION 2

All part numbers in BLUE are new for 2017.73

WILD BOAR AUDIO 200 WATT SPEAKERS•4 ohm, 200-watt speakers feature large, vented magnets, nice studio grade crossovers and carbon fiber cone

•1.25” titanium tweeter with custom reflector cup•Designed specifically for the very small factory speaker cabinets•Locking barbs secure factory speaker wires•No corporate logos on grills•One-piece design makes installation a snap•Sold in pairs

NOTE: Requires 4 ohm amplifier for proper operation.

6.5” REPLACEMENT FRONT AND REAR SPEAKERS•Gen 3 technology using 100% ground-up design specifically for 14-16 touring bikes

•125 watt RMS/ 200 peak watts

•Custom-tooled speaker basket requires no cutting or grinding for install

•Locking speaker barbs secure factory front speaker wires

•Include very clean-looking metal mesh grilles with no corporate logos

•Supplied metal mesh or factory grilles can be used•Sold in pairs

NOTE: Road Glide specific front speaker grills sold separately. (PART #s 4405-0377 and 4405-0399)

GEN3 5” X 7” FRONT SPEAKERS•Feature vented magnets for increased power handling•Includes metal mesh speaker grilles•2 ohm, conservatively rated at 100 watts RMS power handling•Sold in pairs

NOTE: Not compatible with CVO models with factory amplifiers installed.

REPLACEMENT SPEAKERS FOR 85-96 DRESSERS•Direct replacement speakers for 86-96 model bikes equipped with factory radios•Fit behind factory grilles, includes 10mm soft rubber gaskets for an improved fit•4.25” speakers, 4 ohm, 2-way design•Feature Hogtunes “signature” sound to enhance sound on a bike at speed•Install using factory hardware•Can be used on bikes with a car radio conversion kit

GEN3 5.25” REPLACEMENT SPEAKERS•Feature vented magnets for increased power handling•2 ohm styles feature an all-new 1” titanium tweeter dome for smoother highs

•New technologies give more bass response than previous models•Conservatively rated at 100 watts RMS power handling•Sold in pairs

PART # DESCRIPTION SUG. RETAILFOR 14-16 FLHTCU/ FLHTK/ FLHXS/ FLHX/ FLHTCUTG/ ROAD GLIDE/ ROAD GLIDE ULTRA4405-0345 Front repl. speakers $159.954405-0346 Rear repl. speakers 159.95

PART # DESCRIPTION SUG. RETAIL4405-0329 For 06-13 FLTR/X $139.95

PART # DESCRIPTION SUG. RETAIL4405-0263 For 86-96 FLT/ FLHT models with factory or car radios $99.95

PART # DESCRIPTION SUG. RETAILFOR 06-13 FLHT/ FLHX4405-0325 Front; 2 ohm $119.954405-0326 Rear; 2 ohm 119.95FOR 98-05 FLHT/ FLHX OR 98-13 WITH CAR RADIOS OR AMPLIFIERS INSTALLED4405-0327 Front; 6 ohm 119.954405-0328 Rear; 6 ohm 119.95

PART # DESCRIPTION SUG. RETAIL4405-0457 For 14-17 FLHT/ FLHX models $349.95

4405-0345 4405-0346

4405-0325

www.dragnetweb.comSECTION 2

WINDSHIELDS & FAIRINGS

HANDLEBARS,CONTROLS

& MIRRORS

CABLES

BRAKES

TANKS & OIL FILTERS

DASHES & GAUGES

FRAMES & SUSPENSION

FENDERS & LICENSE

PLATE FRAMES

FOOTRESTS

WHEELS & AXLES

HARDWARE, COVERS & GENERAL

ELECTRICAL

LIGHTING

FUEL/AIR SYSTEMS

ENGINE

TRANSMISSION & DRIVELINE

GASKETS & SEALS

AUDIO & VIDEO

SADDLEBAGS & LUGGAGE

SEATS & SISSY BARS

EXHAUST

All part numbers in BLUE are new for 2017.74

REV SERIES AMP MOUNTING PLATES/ KITS•Mounting plate needed to mount REV Series amp on late model FLTRX models•Bolt-in kits allow mounting of a second amp on FLTRX/ FLHX models

PART # DESCRIPTION SUG. RETAIL4405‑0423 Optional mounting plate for 15-17 FLTRX/ FLTRXS $29.954405‑0462 Optional kit allows installation of dual PART # 4405-0352 in 14-17 FLTRX/ FLTRXS

(Non CVO) Models 69.954405‑0461 Optional kit allows installation of dual PART # 4405-0352 in 14-17 FLHX

(Non CVO) Models 69.95

200 WATT AMPLIFIER KIT•200 watt, 4-channel plug-n-play amplifier made specifically for 14-17 touring bikes

•No radio reflash or dealer downloads required•Amp is set up to accommodate any software changes H-D may apply to radios in the future

•Comes with mounting plate with relocation tabs for factory “Christmas Tree” fasteners

•All required wiring/ hardware to complete installation is included•Works best with 2 ohm replacement speakers•Adapter plate required to bolt amp kit into 15-17 FLTRX/ FLTRXS

200 WATT AMPLIFIER KIT•200-watt, 2-channel amplifier (100W x 2)

•Includes upgraded, 100% plug-n-play harness

•Complete with everything needed for installation

NOTE: Not compatible with CVO models with factory amplifiers installed.

NOTE: PART #4405-0096 required to mount amp in FLTR models. PART #4405-0234 required if this is the second Hogtunes amp on FLHT/ FLHX models.

200 WATT AMPLIFIER KIT•200-watt, 4-channel amplifier (50W x 4)

•Includes upgraded, 100% plug-n-play wire harness

•Custom mounting “arms” to secure amp above radio are also included•Comes complete with everything needed for installation•Sold each

NOTE: Not compatible with CVO models with factory amplifiers installed.

ROAD GLIDE ADAPTER KIT•Required if installing Hogtunes USA 24.2 amp, NCA 70.2 (PART #4405-0264) or REV 200-AA (PART #4405-0341) in FLTR models

•Kit includes steel mounting plates, wire harnesses and all required hardware

AMPLIFIER MOUNTING KIT•Mounts 2-channel amp between radio and speaker in 98-13 FLT/ FLHT/X models

•Ideal for mounting second Hogtunes amplifier

•Kit includes steel mounting plate and all required hardware

“REV” SERIES 200 WATT AMP•200 watt 2-channel fairing mounted amplifier (100W x 2 RMS)

•Works best with 2 ohm speakers

•100% plug-n-play; includes mounting plate, all required wiring and hardware to secure amp in fairing

•Optional mounting plate needed for late model FLTRX models

•A second REV series amp can be mounted to FLTRX/ FLHX models with optional bolt-in kits

PART # DESCRIPTION SUG. RETAIL4405‑0344 For 14-17 FLHTCU/ FLHTK/ FLHXS/ FLHX/ FLHTCUTG/ Road Glide/ Road Glide Ultra (Not for use on CVO Models with factory amps installed) $429.954405‑0391 Amp adapter kit for 15-17 FLTRX/ FLTRXS/16-17 Road Glide Ultra 29.95

PART # DESCRIPTION SUG. RETAIL4405‑0341 For 98-13 FLHT/ FLHX/ FLTR/H-D FL Trike

with factory radio $299.95

PART # DESCRIPTION SUG. RETAIL4405‑0338 For 00-13 FLHT/ FLHX/H-D FL Trike models $399.954405‑0405 Adapter mount to 98-13 FLTR/ FLTRX 39.95

PART # DESCRIPTION SUG. RETAIL4405‑0096 2-channel amp adapter $39.95

PART # DESCRIPTION SUG. RETAIL4405‑0234 2-channel Hogtunes

amp mount kit $39.95

PART # DESCRIPTION SUG. RETAIL4405‑0352 For 14-17 FLHT/ FLHX/ FLTR/H-D FL Trike

with factory radio $329.95

4405‑0461

4405‑03444405‑0391

4405‑0423

4405‑0462

4405‑0338

4405‑0405

WINDSHIELDS & FAIRINGS

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS & OIL FILTERS

DASHES & GAUGES

FRAMES & SUSPENSION

FENDERS & LICENSE PLATE FRAMES

FOOTRESTS

WHEELS & AXLES

HARDWARE, COVERS & GENERAL

ELECTRICAL

LIGHTING

FUEL/AIR SYSTEMS

ENGINE

TRANSMISSION & DRIVELINE

GASKETS & SEALS

AUDIO & VIDEO

SADDLEBAGS & LUGGAGE

SEATS & SISSY BARS

EXHAUST

www.dragnetweb.com SECTION 2

All part numbers in BLUE are new for 2017.75

PART # DESCRIPTION SUG. RETAIL4405‑0323 For 96‑13 FLHT models $699.95

PART # DESCRIPTION SUG. RETAIL4405‑0324 For 98‑13 FLTR models $699.95

TITAN 180 WATT AMP AND 7.1” BIG SPEAKER PACKAGE•Hi‑tech, high‑efficiency switching 2‑channel amplifier•Powered by patented “UcD” technology•Protects charging system w/ StartorGuard technology•Free‑flow speaker grille design ensures maximum sound transfer•Works on most touring bikes•Complete with stainless steel mounting hardware•Made in the U.S.A.

NOTE: Speakers fit 96 and later FLHT and all FLTR Harley front speaker applications; 96 and 97 FLHT models with stock speakers may require inner fairing supports OEM #s 58938-96B and 58939-96B.

PART # DESCRIPTION SUG. RETAIL4405‑0283 For 96‑13 FLHT models $299.95

PART # DESCRIPTION SUG. RETAIL4405‑0322 For 98‑13 FLTR models $299.95

TITAN II 7.1” SPEAKER KIT•7.1” coaxial high‑performance speakers•Increases bass, mid‑ and high‑range sound•83% increase in speaker surface area provides the improved performance•Plug‑n‑play with high‑power capacity•Work with stock or amplified systems•92.6 dB, four ohm with a 100 W continuous power (200 W peak power)

PART # DESCRIPTION SUG. RETAIL4405‑0284 For 88‑95 FLHTC/ FLHTCU/ FLTU $139.95

TITAN II 4” SPEAKER KIT•4” coaxial high‑performance speaker upgrade kit•Great sound, plug‑n‑play installation with a durable design•Works great with stock or amplified systems•89.2 dB, four ohm with 50 W continuous power (100 W peak) PART # DESCRIPTION SUG. RETAIL

4405‑0158 For 96‑13 FLT/ FLHT/ FLHTC/H‑D FL Trike (front applications only) $39.95

TITAN POWERGRILL™ SPEAKER ADAPTERS AND GRILLES•Nearly double the sound from your speakers, relative to stock grilles

•Use with 51/4” speakers•Free‑flowing design ensures maximum sound transfer•Adapters maximize speaker angle toward rider’s head•Install easily with stainless steel mounting hardware•Sold in pairs

4405‑0283

4405‑0322

4405‑0323

4405‑0324

www.dragnetweb.comSECTION 2

WINDSHIELDS & FAIRINGS

HANDLEBARS,CONTROLS

& MIRRORS

CABLES

BRAKES

TANKS & OIL FILTERS

DASHES & GAUGES

FRAMES & SUSPENSION

FENDERS & LICENSE

PLATE FRAMES

FOOTRESTS

WHEELS & AXLES

HARDWARE, COVERS & GENERAL

ELECTRICAL

LIGHTING

FUEL/AIR SYSTEMS

ENGINE

TRANSMISSION & DRIVELINE

GASKETS & SEALS

AUDIO & VIDEO

SADDLEBAGS & LUGGAGE

SEATS & SISSY BARS

EXHAUST

All part numbers in BLUE are new for 2017.76

PART # DESCRIPTION SUG. RETAIL4405‑0268 Compact Titan 4‑channel amplifier $649.95

COMPACT TITAN 4‑CHANNEL AUDIO AMPLIFIER•Four channels at 180 watts (max rms @ 4 ohms)

•1 ohm stable can power multiple speakers per channel

•Powered by patented “UcD” (Universal Class‑D) amp technology

•Stator Guard technology helps protect charging system

•Case design features a baffle system to allow air exchange but minimize water encroachment

•Cooling and gain control prevent thermal shutdown•Terminal block designed to allow high‑power connections in the smallest amount of space

•Measures 5” x 7” x 1.8”•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL4405‑0282 Titan 2‑channel audio amplifier $449.95

TITAN 2‑CHANNEL AUDIO AMPLIFIER•2‑channel 180 W per channel audio amplifier

•1 ohm stable can power multiple speakers per channel

•World patented Universal Class‑D full‑range amplifier•Very low, frequency independent THD for super clear sound•Cooling and gain control prevents thermal shutdown•StatorGuard® technology helps protect vehicle charging system•5” x 5” x 1.8”

PART # DESCRIPTION SUG. RETAILRETRO RADIO KITS4401‑0177 For 96‑97 FLTC, FLHT, FLHTC $219.954401‑0178 For 94‑95 FLTC, FLHT, FLHTC 219.954401‑0162 For 98‑13 FLTR, FLHT, FLHTC 219.95

PART # DESCRIPTION SUG. RETAILOPTIONAL SPLASH COVERS FOR SONY® RADIOS ONLY4401‑0144 For 96‑13 FLHT, FLHTC, FLHTCUTG $19.954401‑0076 For 98‑13 FLTR 19.95

RETRO RADIO CD/ RADIO ADAPTER KITS•PART #s 4401‑0177 and 4401‑0178 allow the installation of a Sony CD/ MP3/XM radio upgrade; PART #4401‑0162 can be used with any Sony, Pioneer, JVC, Alpine or Kenwood single‑DIN radio

•Adapts OEM handlebar controls to the Sony radio; no modification to OEM wire harness required

•Retains handlebar control and auto volume function of OEM radio•Comes complete with interface module, face plate, adapter plates and detailed instructions•Optional Splash Covers add sleek looks and protection from water; simple push‑on/ pull‑off installation in a rugged one‑piece design

•Made in the U.S.A.

NOTE: Kits are compatible with Ultra models, but will require additional wiring.

NOTE: Radio is not included.

NOTE: Radio used with PART #4401-0162 must have “steering wheel” remote control input on the back.

4401‑0177

PART # DESCRIPTION SUG. RETAIL4401‑0057 For 96‑10 FLHT, FLTR, H‑D FL Trike $54.95

RETRO RADIO DIN‑SIZED RADIO MOUNTING KIT•Allows the use of most DIN‑sized aftermarket radio to be mounted in both late model FLHT and FLTR Harley‑Davidson motorcycles

•Installs easily, with clean factory look•Can be used with Biketronics RetroRadio Nomad handlebar control kit•Made in the U.S.A.

NOTE: Not for use with Jensen audio systems.

4401‑0144

4401‑0076

4401‑0162

WINDSHIELDS & FAIRINGS

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS & OIL FILTERS

DASHES & GAUGES

FRAMES & SUSPENSION

FENDERS & LICENSE PLATE FRAMES

FOOTRESTS

WHEELS & AXLES

HARDWARE, COVERS & GENERAL

ELECTRICAL

LIGHTING

FUEL/AIR SYSTEMS

ENGINE

TRANSMISSION & DRIVELINE

GASKETS & SEALS

AUDIO & VIDEO

SADDLEBAGS & LUGGAGE

SEATS & SISSY BARS

EXHAUST

www.dragnetweb.com SECTION 2

All part numbers in BLUE are new for 2017.77

PART # DESCRIPTION SUG. RETAILFOR 98-13 FLHT/ FLHTC/ FLHTCU4401-0180 2-speaker kit $679.954401-0182 4-speaker kit 789.95FOR 96-97 FLHT/ FLHTC/ FLHTCU4401-0181 2-speaker kit 679.95FOR 98-13 FLTR/X4401-0179 2-speaker kit 679.95

TITAN II TURNKEY RADIO PACKAGES•Features BIG 61/2” front speakers•High-performance Sony AM/FM radio with CD player and front USB and AUX input generates 52 watt x 4-channel, compatible with HD Radio™ and satellite radio

•Includes radio, Biketronics Titan-II 61/2” high-performance front speakers, mounting kit and electronic module for OEM handlebar radio control switches with AVC (auto-volume control) and Biketronics radio splash cover

•Two-speaker radio packages for FLHT, FLHTC and FLHTCU models also come with Biketronics front speaker PowerGrills•Four-speaker radio package for FLHT and FLHTC models also includes one pair of 51/4” rear speakers (requires OEM rear speaker pods)•Easy installation – bolt-in, plug-in and go

NOTE: Installation of four-speaker systems on bikes with CB radios will eliminate the CB intercom or rear pod switch functions.

4401-0182

4401-0181

4401-0179

www.dragnetweb.comSECTION 2

WINDSHIELDS & FAIRINGS

HANDLEBARS,CONTROLS

& MIRRORS

CABLES

BRAKES

TANKS & OIL FILTERS

DASHES & GAUGES

FRAMES & SUSPENSION

FENDERS & LICENSE

PLATE FRAMES

FOOTRESTS

WHEELS & AXLES

HARDWARE, COVERS & GENERAL

ELECTRICAL

LIGHTING

FUEL/AIR SYSTEMS

ENGINE

TRANSMISSION & DRIVELINE

GASKETS & SEALS

AUDIO & VIDEO

SADDLEBAGS & LUGGAGE

SEATS & SISSY BARS

EXHAUST

All part numbers in BLUE are new for 2017.78

PART # DESCRIPTIONSUG.

RETAILFOR 98‑13 FLHT/ FLHX MODELS4401‑0205 Stereo kit (includes HD1BT stereo and

61/2” high‑performance 2‑way speakers) $649.954401‑0191 Stereo kit (includes HD1BT stereo and 51/4” 2‑way speakers) 589.95

PART # DESCRIPTIONSUG.

RETAILFOR 98‑13 FLHT/ FLHX MODELS (CONT)4401‑0132 JAHD240 80W 2‑channel amplifier $99.954401‑0136 Opt. USB and 1/8” auxiliary input jack 19.954401‑0137 Opt. Jport input jack 12.95

HI PERFORMANCE STEREO KIT/ STEREO UPGRADE•Kit features an HD1BT stereo and 51/4” high performance 2‑way speakers

•Uses the factory wiring connectors for a true plug‑n‑play installation•Works with factory handlebar controls, or the optional wired remote (PART #4401‑0170)•Waterproof unit face (XPX6) and rear chassis (IPX5)•Compatible with OEM speakers – 2 ohm thru 8 ohm stable•Bluetooth® streaming audio (A2DP, AVRCP) allows you to play music stored on a Bluetooth® equipped phone or MP3 player with no wires

•RCA/ Aux connections make custom upgrades easy•iPod®/ iPhone® control and charging through USB (rear)•SiriusXM™ compatible (subscription and SiriusXM adapter required; sold separately)•Maximum power output: 50W x 4•AM/FM tuner•Weatherband with S.A.M.E weather alert•30 station presets (12AM, 18FM)•Audio‑store, seek tuning and RBDS•Red backlighting•Not for use with OEM CB radio or intercom systems•Optional input jack (sold separately) allows iPod® or MP3 device to be connected so you can listen to anything stored on those devices; comes with a standard 9 RCA cable for mounting in any convenient location

4401‑0136 4401‑0137

4401‑0205

PART # DESCRIPTION SUG. RETAIL4401‑0169 For 98‑13 FLHT/ FLHX/ FLTR models $499.95

HI PERFORMANCE STEREO UPGRADE (HD1BT)•Uses the factory wiring connector for a true plug‑and‑play installation

•Works with factory handlebar controls, or the optional wired remote (PART #4401‑0170)•Waterproof unit face (XPX6) and rear chassis (IPX5)•Compatible with OEM speakers – 2 ohm thru 8 ohm stable•Bluetooth® streaming audio (A2DP, AVRCP) allows you to play music stored on a Bluetooth® equipped phone or MP3 player with no wires

•RCA/ Aux connections make custom upgrades easy•iPod®/ iPhone® control and charging through USB (rear)•SiriusXM™ ready (subscription and SiriusXM hardware required; sold separately)•Maximum power output: 50W x 4•AM/FM tuner•Weatherband with S.A.M.E weather alert•30 station presets (12AM, 18FM)•Audio‑store, seek tuning and RBDS•Red backlighting•Not for use with OEM CB radio or intercom systems

PART # DESCRIPTION SUG. RETAIL4401‑0183 SiriusXM Vehicle Tuner $69.95

SIRIUSXM VEHICLE TUNER•Designed to easily connect to SiriusXM‑ready Jensen audio systems

•Features 20+ channels of additional music, sports, entertainment and SiriusXM Latino, a collection of 12 Spanish language channels

•Connect, control and enjoy through compatible audio systems

•Compact size hides discreetly behind the dash for a fully integrated look

•Single interface cable connection to SiriusXM‑Ready stereos simplifies installation

•Includes vehicle tuner, magnetic mount antenna and installation guide

NOTE: Requires a SiriusXM subscription to function.

PART # DESCRIPTION SUG. RETAIL4401‑0189 USB cigarette lighter replacement $24.95

CUSTOM USB PLUG•Custom USB plug replaces stock cigarette lighter receptacle•Fits Harley FLH models•Plug can be used with HD1BT Stereo (PART #4401‑0169) or any stereo with a USB input in the radio’s rear

•Play back music from iPod, thumb drive or iPhone•Can also be used as a stand alone upgrade to replace the cigarette lighter with a USB charging port

PART # DESCRIPTION SUG. RETAIL4401‑0190 USB and auxiliary bracket port $16.95

JENAUX USB AND AUXILIARY PORT BRACKET•Allows for easy installation of Jenaux USB and auxiliary port (PART #4401‑0136)

•Fits into the right side quick disconnect saddlebag on Harley FLH models

WINDSHIELDS & FAIRINGS

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS & OIL FILTERS

DASHES & GAUGES

FRAMES & SUSPENSION

FENDERS & LICENSE PLATE FRAMES

FOOTRESTS

WHEELS & AXLES

HARDWARE, COVERS & GENERAL

ELECTRICAL

LIGHTING

FUEL/AIR SYSTEMS

ENGINE

TRANSMISSION & DRIVELINE

GASKETS & SEALS

AUDIO & VIDEO

SADDLEBAGS & LUGGAGE

SEATS & SISSY BARS

EXHAUST

www.dragnetweb.com SECTION 2

All part numbers in BLUE are new for 2017.79

PART # DESCRIPTION SUG. RETAIL4401‑0161 AM/FM waterproof stereo w/ Bluetooth® $209.954401‑0136 Opt. USB and 1/8” auxiliary input jack 19.95

PART # DESCRIPTION SUG. RETAIL4401‑0137 Opt. Jport 1/8” auxilary input jack $12.95

MS2013BT AM/FM/ USB WATERPROOF STEREO WITH BLUETOOTH®

•160 watts (40W x 4)•IPX5 waterproof rated•AM/FM electronic tuner (US/ Euro selectable)•Bluetooth interface capability (A2DP/ AVRCP)•USB input allows for playback of MP3/ WMA files from compatible flash drives

•Low battery warning•Zero current memory draw•Rear auxiliary input (RCA)•Wired remote capable (MWR150, MWR100, MWR75)•Pre-amp line out audio (RCA)•EQ presets•Conformal coated circuit boards•Solid top chassis•UV-resistant materials - ASTMD4329 compliant•Corrosion-resistant finish - ASTMB117•Standard DIN chassis•Regulatory certifications FCC/CE/ RoHS/C-TICK•Complies with UL60065•Optional input jack (sold separately) allows iPod® or MP3 device to be connected so you can listen to anything stored on those devices; comes with a standard 9 RCA cable for mounting in any convenient location

NOTE: Requires custom mounting for all H-D models.

4401‑01374401‑0136

4401‑0161

PART # DESCRIPTION SUG. RETAIL4401‑0160 JHD40BT mini radio $269.954401‑0136 USB and 1/8” auxiliary input jack 19.95

PART # DESCRIPTION SUG. RETAIL4401‑0137 Opt. 1/8” auxiliary input jack $12.95

JHD40BT BLUETOOTH® RADIO•Maximum power output: 160W (4x40W)•Receives Bluetooth® streaming audio and controls Bluetooth-enabled devices•7-channel NOAA Weatherband tuner•Waterproof•iPod®/ iPhone® ready via USB (rear pig tail)•AM/FM electronic tuner (US/ Euro)•30 programmable station presets (18FM, 12AM)•Auto-store/ preset scan•Line-level audio out (rear RCA pair)•Auxiliary audio input (rear RCA pair)•Multiple mounting capabilities: front flush mount, rear flush mount and surface mount with AMPS pattern

•White LED backlit dot matrix LCD display and buttons•AMP remote turn on (12V @ 500mA)•Wired remote control ready•Low battery warning•UV-resistant finishes/ materials•Corrosion resistant materials•Overall dimensions 4” L x 6.5” W x 2” D•Flush mounting requires hole size of approximately .70” L x 5.7” W•Optional input jack (sold separately) allows iPod® or MP3 device to be connected so you can listen to anything stored on those devices; comes with a standard 9 RCA cable for mounting in any convenient location

NOTE: Can be used with 7/8”, 1” and 11/4” bar mount PART #4401-0051.

4401‑0136

4401‑0160

4401‑0137

PART # DESCRIPTION SUG. RETAIL4401‑0129 JHD910BT Bluetooth mini radio $269.95

JHD910BT BLUETOOTH® MINI RADIO•12V DC power•AM/FM electronic tuner (US/ Euro)•Front and rear panel audio Aux-in for use with iPod®, MP3 players and portable CD players•Listen to music your own way through Bluetooth®-enabled stereo headphones or built-in 15W stereo amplifier

•Works with most factory installed speaker/ antenna systems or our JENSEN speakers (antenna sold separately)

•7-channel NOAA weatherband tuner•Weather Alert automatically switches to WB mode when NOAA warning broadcast is received•2-wire connection prevents battery drain when vehicle is not in use•Clock runs up to 30 days when vehicle battery is disconnected•Corrosion and UV-resistant faceplate•30 programmable station presets (18FM, 12AM)•Built-in job site work timer•Electronic seek up/ down/ volume/ bass/ treble/ balance•12/24 hour clock•Backlit controls with selectable amber or green illumination colors•Daylight readable display with wide-viewing angle•One-touch audio mute•Dimensions: 53/16” W x 33/8” H x 17/8” D

NOTE: Can be used with 7/8”, 1” and 11/4” bar mount PART #4401-0051.

www.dragnetweb.comSECTION 2

WINDSHIELDS & FAIRINGS

HANDLEBARS,CONTROLS

& MIRRORS

CABLES

BRAKES

TANKS & OIL FILTERS

DASHES & GAUGES

FRAMES & SUSPENSION

FENDERS & LICENSE

PLATE FRAMES

FOOTRESTS

WHEELS & AXLES

HARDWARE, COVERS & GENERAL

ELECTRICAL

LIGHTING

FUEL/AIR SYSTEMS

ENGINE

TRANSMISSION & DRIVELINE

GASKETS & SEALS

AUDIO & VIDEO

SADDLEBAGS & LUGGAGE

SEATS & SISSY BARS

EXHAUST

All part numbers in BLUE are new for 2017.80

61/2” HIGH-PERFORMANCE 2-WAY SPEAKERS•Direct plug-and-play replacement; an easy upgrade for smaller OEM front speakers

•60 watt maximum power input•73Hz-20KHz frequency response•Suspended tweeter•Santoprene suspension/ surround with polypropylene cone

•Hybrid magnets (90mm, 14.7 oz. Neodymium)

•Stamped steel baskets•EVA mounting gaskets•UV-resistant (ASTM-D4329) black grilles•21/2” mounting depth•Include adapter rings that allow for speaker to be mounted in the 51/4” opening

•Sold in pairs

51/4” HIGH PERFORMANCE 2-WAY SPEAKERS•Direct plug-and-play replacement and easy upgrade front speakers

•Designed just for motorcycles and built to withstand harsh weather

•50 watts max power input•76Hz-20Hz frequency response•Bridged/ suspended tweeter•Santoprene suspension/ surround with polypropylene cone•Hybrid magnets (90mm, 14.7 oz. Neodymium)•Stamped steel baskets•EVA mounting gaskets•UV resistant (ASTM-D4329) black grilles•4.67” hole size with 2.5” mounting depth•Sold in pairs

JAHD240 80W 2-CHANNEL UNIVERSAL AMPLIFIER•2-channel audio amplifier•2 x 40W max power•2 x 20W RMS•4 ohm; 8 ohm stable•Portable audio device input sensitivity 120mV•Frequency response 20 Hz to 20KHz•RCA audio input connectors•Red LED power indicator•Epoxy-potted enclosure•7.5A fuse in waterproof holder•Waterproof (IPX5)•Corrosion resistant to ASTM B117•Optional Jport input jack (sold separately) allows iPod® or MP3 device to be connected so you can listen to anything stored on those devices; comes with a standard 9 RCA cable for mounting in any convenient location

HANDLEBAR CONTROL•Controls volume up/ down, track/ tuning up/ down, mode select and mute

•Diecast aluminum with high-quality chrome or black finish

•Ergonomic rubberized black buttons

•Waterproof (IPX6)•Fits with mounting bracket, PART #4401-0172, sold separately

•Includes 36” cable to reach any fairing or windshield mount system•Works with JENSEN stereo systems PART #s 4401-0191, 4401-0160, 4401-0169 and 4401-0174

UNIVERSAL 6.5” COAXIAL SPEAKER•Max power input: 75 watts•Frequency response: 65Hz – 20 KHz•Bridged/ suspended tweeter•Polypropylene cone•Rubber suspension/ surround•Magnet weight: 11 oz.•High-polished chrome grille•Water- and corrosion-resistant sealed design•All-plastic chassis construction•UV-resistant (ASTM D4329)•Hole size: 5”•Mounting depth: 2.23”•Sold each

JHD240BT UNIVERSAL 80W 2-CHANNEL BLUETOOTH® AMPLIFIER•This amp’s compact size makes it easy to add music to nearly any bike

•80 watt max power (40 watt RMS)•Bluetooth® audio (AVRCP, A2DP) allows you to play music stored on a Bluetooth®-equipped phone or MP3 player with no wires

•Waterproof (IPX6)•Illuminated program button•4 Ohm – 8 Ohm stable•Operating voltage: 10 – 18VDC•Frequency response: 20 Hz – 20 KHz•Red LED power indicator•Epoxy potted enclosure•Corrosion-resistant (ASTM B117)

OPTIONAL HANDLEBAR MOUNT FOR MINI AM/FM/WB STEREO•Optional handlebar mount works with Jensen JAD910 mono stereo

NOTE: Headphones are not for use when vehicle is in motion.

PART # DESCRIPTION SUG. RETAIL4405-0418 For 96-13 FLHT/ FLHX models $149.95

PART # DESCRIPTION SUG. RETAIL4405-0392 For 98-13 FLHT/ FLHX models $129.95

PART # DESCRIPTION SUG. RETAIL4401-0132 JAHD240 80W 2-channel amplifier $99.954401-0137 Opt. Jport 1/8” auxiliary input jack 12.95

PART # DESCRIPTION SUG. RETAIL4401-0170 Handlebar control (JHDHBC); chrome $49.954401-0184 Handlebar control (JHDHBCB); black 49.954401-0172 Opt. mounting bracket for H-D 24.95

PART # DESCRIPTION SUG. RETAIL4405-0349 6.5” coaxial speaker (MSX60CP) $44.95

PART # DESCRIPTION SUG. RETAIL4401-0171 Bluetooth® amplifier (JAHD24OBT) $129.95

PART # DESCRIPTION SUG. RETAIL4401-0051 Mount for 7/8”-11/4” bars $49.95

4401-0137

4401-0132

4401-01724401-0184

WINDSHIELDS & FAIRINGS

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS & OIL FILTERS

DASHES & GAUGES

FRAMES & SUSPENSION

FENDERS & LICENSE PLATE FRAMES

FOOTRESTS

WHEELS & AXLES

HARDWARE, COVERS & GENERAL

ELECTRICAL

LIGHTING

FUEL/AIR SYSTEMS

ENGINE

TRANSMISSION & DRIVELINE

GASKETS & SEALS

AUDIO & VIDEO

SADDLEBAGS & LUGGAGE

SEATS & SISSY BARS

EXHAUST

www.dragnetweb.com SECTION 2

All part numbers in BLUE are new for 2017.81

PERFORMANCE SERIES 360W FAIRING/ REAR SPEAKER AMPLIFIER KITS•71/4” round drivers are the largest diameter speakers that can be installed into the Harley® Road Glide style fairing, with cone volume and mass comparable to a 6” x 9” speaker

•51/4” round drivers are the largest and most efficient speakers you can install into the rear speaker pod position on the Harley Road Glide Ultra

•Two-speaker kits include: 2 speakers, custom-made plug-n-play wiring harness, top quality heavy gauge power/ ground wires, all necessary mounting hardware, complete installation/ operation instructions and 180w RMS 2-CH amplifier

•Four-speaker kits include: 4 speakers, custom-made plug-n-play wiring harness, top quality heavy gauge power/ ground wires, mounting hardware, installation/ operation instructions and 360w RMS 4-CH amplifier

•Six-speaker kits include: 6 speakers, custom-made plug-n-play wiring harness, top quality heavy gauge power/ ground wires, mounting hardware, installation/ operation instructions and 360w RMS amplifier

•At 2 ohms impedance and 140/ 120+ watts max power, these speakers provide the ultimate in bass response, extended mid/ high frequency range and raw audio power

•Feature a waterproof injection-molded polycarbonate woofer cone, high-flux strength but lightweight, dual-donut Neodymium magnet, high-efficiency voice coil, the latest design grillework with mounted tweeter and mid-range and top-quality adapter rings/ bracket hardware for secure and clean mounting into the Road Glide Ultra

•The most efficient speakers you can buy for your Harley, and their mounting hole pattern and spade electrical connections are exactly the same as the factory specification

•Full-range class D amplifier at 90W RMS per channel x 4 channels; 360W total, driven into a 2 ohm load at 14.4 VDC•Amplifier gain adjustments are factory preset for 2-, 4- or 6-speaker configuration on the Harley Road Glide Ultra•Amps mount inside the fairing using the custom-made stainless steel bracket system•Include custom-made plug-n-play wiring harnesses, all necessary mounting hardware and installation/ operation instructions•Amplifier measures 71/4” L x 43/4” W x 13/4” T

PART # DESCRIPTION SUG. RETAILFOR 11-13 FLTRU4405-0309 4-speaker $899.95

PART # DESCRIPTION SUG. RETAILFOR 06-13 FLHTCU4405-0308 6-speaker $1,349.954405-0310 4-speaker 899.95

4405-0308

4405-0310

4405-0309

www.dragnetweb.comSECTION 2

WINDSHIELDS & FAIRINGS

HANDLEBARS,CONTROLS

& MIRRORS

CABLES

BRAKES

TANKS & OIL FILTERS

DASHES & GAUGES

FRAMES & SUSPENSION

FENDERS & LICENSE

PLATE FRAMES

FOOTRESTS

WHEELS & AXLES

HARDWARE, COVERS & GENERAL

ELECTRICAL

LIGHTING

FUEL/AIR SYSTEMS

ENGINE

TRANSMISSION & DRIVELINE

GASKETS & SEALS

AUDIO & VIDEO

SADDLEBAGS & LUGGAGE

SEATS & SISSY BARS

EXHAUST

All part numbers in BLUE are new for 2017.82

ROKKER® XXR EXTREME 330W 2 SPEAKER AND AMPLIFIER KIT•Includes two fully weatherproofed 6.71” ROKKER XXR speakers

•Amplifier is rated at 165W w/ 2 channels•Up to 330W of RMS power•Plug-and-play•Speakers and tweeters are shock- and weather-proof

PART # DESCRIPTION SUG. RETAIL4405‑0455 For 14-17 FLHT/ FLHX $1029.95

PART # DESCRIPTION SUG. RETAIL4405‑0456 For 15-17 FLTRX/ FLTRXS $1029.95

4405‑0455

4405‑0456

PART # DESCRIPTION SUG. RETAIL4405‑0311 For 06-13 FLTR $559.95

PART # DESCRIPTION SUG. RETAIL4405‑0312 For 06-13 FLHX $559.95

PERFORMANCE SERIES 180W FAIRING SPEAKERS AND AMPLIFIER KITS•The two 71/4” round drivers are the largest diameter speakers that can be installed into the fairing, with cone volume and mass comparable to a 6” x 9” speaker

•At 2 ohms impedance and 140+ watts max power, these speakers provide the ultimate in bass response, extended mid/ high frequency range and raw audio power

•Feature a waterproof injection-molded polycarbonate woofer cone, high-flux strength but lightweight, dual-donut Neodymium magnet, high efficiency voice coil, the latest design grillework with mounted tweeter and mid-range and top-quality adapter rings/ bracket hardware for secure and clean mounting

•The most efficient speakers you can buy for your Harley, and their mounting hole pattern and spade electrical connections are exactly the same as the factory specification

•Full range class D amplifier at 90W RMS per channel x 2 channels; 180W total, driven continuously into a 2 ohm load at 14.4VDC

•Amplifier mounts to the top of the custom made stainless steel bracket system, which has the slots in the bottom section to properly relocate two of the Harley CB, MP3 or XM sat radio modules, if installed

•Amplifier measures 61/2” x 43/4 x 13/4

•Includes plug-n-play wiring harnesses along with all necessary mounting hardware and complete installation/ operation instructions

4405‑0311

4405‑0312

WINDSHIELDS & FAIRINGS

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS & OIL FILTERS

DASHES & GAUGES

FRAMES & SUSPENSION

FENDERS & LICENSE PLATE FRAMES

FOOTRESTS

WHEELS & AXLES

HARDWARE, COVERS & GENERAL

ELECTRICAL

LIGHTING

FUEL/AIR SYSTEMS

ENGINE

TRANSMISSION & DRIVELINE

GASKETS & SEALS

AUDIO & VIDEO

SADDLEBAGS & LUGGAGE

SEATS & SISSY BARS

EXHAUST

www.dragnetweb.com SECTION 2

All part numbers in BLUE are new for 2017.83

ROKKER® XXR 6.71” SPEAKER KITS•Maximum 300W input•One-piece lightweight driver cone•Same size components as stock speakers•Easy installation requiring no modifications; plug-and-play design

ROKKER™ XX SPEAKER KITS•5.25” speakers have been designed specifically for rear pod position on the 98-13 Harley Ultra, 7.25” speakers provide the largest speakers that can be installed into Harley fairings

•217 watts maximum input; 156W RMS continuous 92 dB sensitivity•High-output silk-dome tweeter•Lightweight waterproof one-piece woven-fiber driver cone•High-efficiency vented voice-coil and magnet structure for improved cooling when operating at high volume levels for extended periods

•Custom max-flow speaker grilles for crystal clear sound at any speed

•Specially-tuned speaker-mounted crossover network for connection of optional J&M fairing or grille-mounted tweeter and mid-range drivers

•Top-quality adapter rings/ bracket hardware for secure and clean mounting into the fairing

•Hardware included to utilize the old or new designs of the Harley inside-fairing metal brackets•Fairing acoustic foam pads are included•Plug-n-play, no-modification solution, complete with easy-to-follow installation instructions

NOTE: Rear speaker kits are not for direct connection to the 98-05 Harley factory radio.

PART # DESCRIPTION SUG. RETAILFRONT SPEAKERS4405‑0451 For 14-17 FLHT/ FLHX $429.954405‑0450 For 15-17 FLTRX 429.95

PART # DESCRIPTION SUG. RETAILREAR/ FAIRING LOWER SPEAKERS4405‑0452 For 14-17 FLHT/ FLHX (except Twin Cooled models)

w/ rear/ lower-fairing mounted speakers $429.95

PART # DESCRIPTION SUG. RETAIL7.25” FAIRING SPEAKER KITS4405‑0453 For 98-13 FLHT/ FLHX models $369.954405‑0454 For 98-13 FLTR models 369.957.25” FAIRING LOWER SPEAKER KIT4405‑03161 For 06-13 FLHTCU models 449.95

PART # DESCRIPTION SUG. RETAIL5.25” REAR SPEAKER KIT4405‑0281 For 06-13 FLHT models $199.951 Requires vented lowers; J&M amp is recommended.

4405‑0453

4405‑0454

4405‑0281

4405‑0316

4405‑0451

4405‑0450

4405‑0452

www.dragnetweb.comSECTION 2

WINDSHIELDS & FAIRINGS

HANDLEBARS,CONTROLS

& MIRRORS

CABLES

BRAKES

TANKS & OIL FILTERS

DASHES & GAUGES

FRAMES & SUSPENSION

FENDERS & LICENSE

PLATE FRAMES

FOOTRESTS

WHEELS & AXLES

HARDWARE, COVERS & GENERAL

ELECTRICAL

LIGHTING

FUEL/AIR SYSTEMS

ENGINE

TRANSMISSION & DRIVELINE

GASKETS & SEALS

AUDIO & VIDEO

SADDLEBAGS & LUGGAGE

SEATS & SISSY BARS

EXHAUST

All part numbers in BLUE are new for 2017.84

51/4” HIGH-PERFORMANCE REPLACEMENT SPEAKERS•High-performance speakers replace stock units

•Superior bass response with extended mid/ high frequency range•Feature waterproof injection-molded polycarbonate cone woofer•High-flux strength Neodymium magnet•High-efficiency voice coil•Dimensions, mounting hole pattern and spade electrical connections are exactly the same as OEM for easy mounting

•Sold in pairs

ROKKER™ FAIRING SPEAKER GRILLES•Built-in high-output tweeter and mid-range drivers•Plug in directly to the crossover network on the back of ROKKER™ XX/XT series speakers•Sold as a pair (one left, one right) per kit

ROKKER™ TWEETER KIT•Designed specifically for use on the 98-13 OEM BatWing or Road Glide style fairing

•25mm diameter high-output dome tweeters bring extra high-frequency definition to your Harley Bagger audio system

•Rated at 300W peak power (150W RMS)•Tweeters are spec’d at 2 ohms nominal impedance•Work with any radio or amplifier designed to operate at a 2, 4, 6 or 8-ohm load

•Kit includes two tweeters and alternate connection wire assemblies•All necessary mounting hardware and complete installation instructions included

PART # DESCRIPTION RATING SUG. RETAIL71/4” FAIRING SPEAKERS4405-0252 For 06-13 FLHT/ FLHX models 2 ohm, 140W $239.954405-0253 For 06-13 FLTR models 2 ohm, 140W 239.95

PART # DESCRIPTION RATING SUG. RETAIL51/4” REAR SPEAKERS4405-0257 For 06-13 FLHT models 2 ohm, 120W $149.95

PART # DESCRIPTION RATING SUG. RETAILFAIRING SPEAKERSDS-319930 For 96-97 FLHTC (includes grilles) 3-4 ohm, 100W $99.95REAR SPEAKERS4405-0254 For 06-13 FLTR models 2 ohm, 140W 118.95

PART # DESCRIPTION RATING SUG. RETAILFAIRING AND/OR REAR SPEAKERS4405-0254 For 06-13 FLHT/ FLHX models 2 ohm, 140W $118.95

PART # DESCRIPTION SUG. RETAIL4405-0319 For 98-13 FLTR/X models $79.95

PART # DESCRIPTION SUG. RETAIL4405-0315 For 98-13 FLHTC/U models $69.95

PART # DESCRIPTION SUG. RETAIL4405-0321 For 98-13 FLHT/ FLHX/ FLTR models $149.95

HIGH-PERFORMANCE UPGRADED SPEAKERS•High-performance upgraded speakers feature new three-way speaker set•Provide the ultimate in bass response, extended mid/high frequency and raw audio power•Feature waterproof, injection-molded polycarbonate woofer cone•High-flux strength dual-donut Neodymium magnet•High-efficiency voice coil•Replacement grille set with mounted chrome black mid-range tweeter•Grille-mounted tweeter and mid-range•Dimensions, mounting hole pattern and spade electrical connections are exactly the same as OEM for easy mounting•Sold in pairs

4405-02524405-0253

4405-0257

DS-319930

4405-0319

4405-0315

WINDSHIELDS & FAIRINGS

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS & OIL FILTERS

DASHES & GAUGES

FRAMES & SUSPENSION

FENDERS & LICENSE PLATE FRAMES

FOOTRESTS

WHEELS & AXLES

HARDWARE, COVERS & GENERAL

ELECTRICAL

LIGHTING

FUEL/AIR SYSTEMS

ENGINE

TRANSMISSION & DRIVELINE

GASKETS & SEALS

AUDIO & VIDEO

SADDLEBAGS & LUGGAGE

SEATS & SISSY BARS

EXHAUST

www.dragnetweb.com SECTION 2

All part numbers in BLUE are new for 2017.85

SADDLEBAG LID SPEAKER GRILL SETS•Direct replacements for H-D Boom Audio Saddlebag Lid Speaker grills

•Include one left and one right side grill along with all necessary mounting hardware

ROKKER™ XT SADDLEBAG SUBWOOFER SPEAKER KIT•Includes two 71/4” round subwoofers that are large diameter dedicated low-frequency speakers, with cone volume and mass comparable to a 6” x 9” speaker

•2 ohm impedance, 40-3kHz frequency response and 200 watts max power for powerful bass response

•Mount into the rear portion of the stock dresser hard saddlebags, while leaving more than 75% of the saddlebag storage area available for normal luggage

•Waterproof mylar/ polycarbonate woofer cones•High-flux strength, lightweight dual-donut Neodymium magnets•High-efficiency vented voice-coils for improved cooling when operating at high volume levels for extended periods•Custom-designed grillework for mounting in the rear saddlebag position, mounting spacers, weatherproof gasket seals and protective rear luggage cowls

•Connects to rear channels of J&M 500W 4-channel ROKKER amplifier

ROKKER™ SPEAKERS FOR BOOM SADDLEBAG LID KITS•Lightweight waterproof one-piece woven-fiber driver cone•Super high-density light-weight Neodymiium magnet structure, specially coated to maintain flux-strength integrity even at extreme operating temperatures

•High-efficiency vented voice-coil and magnet structure for improved cooling when operating at high volume levels for extended periods

•Easy plug-n-play installation in place of the Harley factory Boom 5” x 7” speakers, with sealing gasket and custom lower-basket magnet protective cap included

•Sold in pairs

LED LIGHT RING KIT FOR J&M 71/4” FAIRING SPEAKERS•Give your Harley fairing dash panel the ultimate custom look with J&M’s new five-color (red, blue, green, orange and amber) fairing speaker LED light rings

•Designed to be used with the J&M brand 71/4” speakers with grille-mounted mid-range and/or tweeter on Street Glide/ Ultra/ Road Glide/ Electra Glide fairings

•Rings are made with top-quality high-intensity LEDs, mounted on high-strength PCB board material, with total reverse-polarity/ over-voltage protection as part of their design and are completely sealed for absolute moisture resistance to provide many years of service

•Ring color is controlled by individual PCB-mounted DIP switches to allow you to turn on one color at a time or a combination of colors, to help match to the color of your dash mounted gauges and/or radio lights

•Easy installation: rings simply sandwich between the J&M speaker grille and the plastic adapter/ spacer ring that the speaker mounts to, during installation

•Ring power/ ground wiring harness is made to plug into the back of the cigarette lighter socket, for a simple and easy plug-n-play installation•Kit includes two LED light rings, power/ ground wiring harness and complete installation/ operation instructions

PART # DESCRIPTION SUG. RETAIL4405-0408 For 14-17 FLHT/ FLHX/ FLTRX/ FLTRU models $84.95

PART # DESCRIPTION SUG. RETAIL4405-0407 For 98-13 FLHT/ FLHX/ FLTRX/ FLTRU models $79.95

PART # DESCRIPTION SUG. RETAIL4405-0280 For 98-13 FLHT/ FLHX/ FLTR models with hard saddlebags $349.95

PART # DESCRIPTION SUG. RETAIL4405-0347 For 14-17 FLHT/ FLHX/ FLTR models $349.95

PART # DESCRIPTION SUG. RETAIL4405-0348 For 06-13 FLHT/ FLHX/ FLTR models $349.95

PART # DESCRIPTION SUG. RETAIL4405-0256 For 06-13 FLHT/ FLHX models w/ J&M 71/4” fairing speakers $249.95

4405-0347

4405-04074405-0408

www.dragnetweb.comSECTION 2

WINDSHIELDS & FAIRINGS

HANDLEBARS,CONTROLS

& MIRRORS

CABLES

BRAKES

TANKS & OIL FILTERS

DASHES & GAUGES

FRAMES & SUSPENSION

FENDERS & LICENSE

PLATE FRAMES

FOOTRESTS

WHEELS & AXLES

HARDWARE, COVERS & GENERAL

ELECTRICAL

LIGHTING

FUEL/AIR SYSTEMS

ENGINE

TRANSMISSION & DRIVELINE

GASKETS & SEALS

AUDIO & VIDEO

SADDLEBAGS & LUGGAGE

SEATS & SISSY BARS

EXHAUST

All part numbers in BLUE are new for 2017.86

ROKKER™ 330W AND 630W AMPLIFIER KITS•Designed specifically for use with the Harley HK radio•330 watt kits are rated at 165 watts RMS per channel x 2 channels•630 watt kits are rated at 157.5 watts RMS per channel x 4 channels•Mount to the custom-made stainless steel bracket system•Plug-n-play wireless harness included•Include all necessary mounting hardware and complete operation/ installation instructions•Amplifier measures 105/8” L x 5” W x 15/8” H

PERFORMANCE SERIES 360W RMS 4-CHANNEL AMP KIT•The specific plug-n-play wiring harness included with this kit takes the two-channels of audio signal available from the Harley RoadGlide radio (either version), and provides four separate channels of amplification at 90W RMS continuous, for each channel

•Full-range class D amplifier is spec’d at 90 watts RMS per channel X4 channels, (360W total) driven continuously into a 2 ohm load @ 14.4VDC•Amplifier mounts to the custom made, stainless-steel 2-piece bracket system, to provide solid and secure mounting inside the RoadGlide fairing, in addition to blocking amplifier heat from being transferred to the radio

•Custom-made plug-n-play wiring harnesses are also included•Top-quality, heavy-gauge, power/ ground wires are used for the fused battery connection; all necessary mounting hardware and complete installation/ operation instructions are included

•Amplifier measures 71/4” X 43/4” X 13/4”

PART # DESCRIPTION SUG. RETAIL330W AMPLIFIER KITS4405-0401 For 14-17 FLHTCU/ FLHX $599.954405-0403 For 15-17 FLTRX/ FLTRXS 599.954405-0400 For 06-13 FLHTCU/ FLHX 549.954405-0402 For 06-13 FLTR/ FLTRX 549.95630W AMPLIFIER KITS4405-0434 For 14-17 FLHTCU 949.954405-0433 For 14-17 FLHX w/ rear-mounted speakers 899.95

PART # DESCRIPTION SUG. RETAIL630W AMPLIFIER KITS (CONT)4405-0431 For 06-13 FLHX w/ rear-mounted speakers $849.954405-0432 For 06-13 FLHT 899.954405-0435 For 98-13 baggers 799.954405-0436 For 06-13 FLTR w/ rear-mounted speakers 849.954405-0437 For 11-13 FLTR 899.954405-0438 For 15-17 FLTR w/ rear-mounted speakers 899.954405-0439 For 16-17 FLTRU 949.95

PART # DESCRIPTION SUG. RETAIL4405-0390 For 15-17 FLTRX/ FLTRXS/ FLTRUSE models $629.95

4405-0403

4405-0434

WINDSHIELDS & FAIRINGS

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS & OIL FILTERS

DASHES & GAUGES

FRAMES & SUSPENSION

FENDERS & LICENSE PLATE FRAMES

FOOTRESTS

WHEELS & AXLES

HARDWARE, COVERS & GENERAL

ELECTRICAL

LIGHTING

FUEL/AIR SYSTEMS

ENGINE

TRANSMISSION & DRIVELINE

GASKETS & SEALS

AUDIO & VIDEO

SADDLEBAGS & LUGGAGE

SEATS & SISSY BARS

EXHAUST

www.dragnetweb.com SECTION 2

All part numbers in BLUE are new for 2017.87

PERFORMANCE SERIES 180W AND 360W AMPLIFIER KITS•Designed for universal application on FLHT/ FLHX/ FLTR models with stock Harley or aftermarket radio systems

•The less expensive universal application kit allows the installer to configure or fabricate the exact mounting location as desired to meet their installation’s goals or space requirements

•Full-range class D amplifier with 90W RMS per channel, driven continuous into a 2 ohm load at 14.4 VDC

•Include custom-made plug-n-play wiring harnesses, top-quality, heavy-gauge power and ground wires that are used for the fused battery connection and complete installation/ operation instructions

PERFORMANCE SERIES 180W RMS 2-CHANNEL AMP KIT•Full-range class D, amplifier spec’d at 90 watts RMS per channel X2 channels, (180W total) driven continuous into a 2 ohm load @ 14.4VDC•Amplifier mounts to the custom-made, stainless-steel, 2-piece bracket system, to provide solid and secure mounting inside the RoadGlide fairing, in addition to blocking amplifier heat from being transferred to the radio

•Custom-made plug-n-play wiring harnesses are included with this amplifier kit•Top-quality, heavy-gauge power/ ground wires are used for the fused battery connection; all necessary mounting hardware and complete installation/ operation instructions are included

•Amplifier measures 61/2” X 43/4” X 13/4”

PART # DESCRIPTION SUG. RETAILFOR 14-17 FLHT/ FLHX MODELS (61/2” L X 43/4” W X 13/4” T)4405-0335 180W amplifier kit $439.954405-0336 360W amplifier kit w/ lower or rear speakers 629.954405-0337 360W amplifier kit 679.95

PART # DESCRIPTION SUG. RETAILFOR 98-13 FLHT/ FLHX/ FLTR MODELS (71/4” L x 43/4” W x 13/4” T)4405-0306 180W amplifer kit $299.954405-0305 360W amplifer kit 469.95

PART # DESCRIPTION SUG. RETAIL4405-0389 For 15-17 FLTRX/ FLTRXS/ FLTRUSE models $439.95

4405-0335

4405-0305

www.dragnetweb.comSECTION 2

WINDSHIELDS & FAIRINGS

HANDLEBARS,CONTROLS

& MIRRORS

CABLES

BRAKES

TANKS & OIL FILTERS

DASHES & GAUGES

FRAMES & SUSPENSION

FENDERS & LICENSE

PLATE FRAMES

FOOTRESTS

WHEELS & AXLES

HARDWARE, COVERS & GENERAL

ELECTRICAL

LIGHTING

FUEL/AIR SYSTEMS

ENGINE

TRANSMISSION & DRIVELINE

GASKETS & SEALS

AUDIO & VIDEO

SADDLEBAGS & LUGGAGE

SEATS & SISSY BARS

EXHAUST

All part numbers in BLUE are new for 2017.88

PART # DESCRIPTION SUG. RETAIL4405‑0192 For 89‑13 FLHT fairings $44.95

PART # DESCRIPTION SUG. RETAIL4405‑0193 For 98‑13 FLTR fairings $44.95

FAIRING/ SPEAKER ACOUSTIC PAD KITS•In‑fairing acoustic pads are one of the easiest things you can do to tighten up the bass and improve the overall sound quality of your fairing‑mounted speakers

•Acoustic foam comes with adhesive installed•Die‑cut for perfect fit•Include complete and detailed installation instructions

PART # DESCRIPTION SUG. RETAILFAIRING KITS4405‑0466 For 14‑16 FLHT/ FLHX $599.954405‑0463 For 96‑13 FLHT/ FLHX 599.954405‑0467 For 15‑16 FLTRX/ FLTRXS 599.954405‑0464 For 98‑13 FLTR/ FLTRX 599.95

PART # DESCRIPTION SUG. RETAILKING TOUR‑PAK® KITS4405‑0468 For 14‑16 FLHT/ FLHX/ FLTR/ FLTRX models $599.954405‑0465 For 96‑13 FLHT/ FLHX/ FLTR/ FLTRX models 599.95

KLOCK WERKS POWERED BY KICKER AUDIO FIT KITS•Each kit includes:•One pair of 61/2” High Performance Dual Voice Coil Speakers that fit into factory openings (Tour‑pak kit includes pair of 51/4” speakers)•Custom wiring harness for 100% plug‑n‑play installation•Small footprint Amp that provides high power with very low current draw (less than 10 amps at max output)•Custom stainless steel mounting bracket•All necessary hardware and installation instructions•There is no need to cut wiring or chop up the fairing or trunk; everything needed for installation is included•Weather‑resistant coated circuit board•RMS power (watts/ channel) @ 14.4 Volts (2 OHMS: 50x2) (4 OHMS: 25x2) ‑ Kit includes 2 OHM speakers

PART # DESCRIPTION SUG. RETAIL0521‑1492 For 14‑17 FLHT/ FLHX style fairing $189.950521‑1491 For 86‑13 FLHT/ FLHX style fairing 189.95

PART # DESCRIPTION SUG. RETAIL0521‑1494 For 15‑17 FLTRX/ FLTRU style fairing $239.950521‑1493 For 98‑13 FLTR style fairing 239.95

KLOCK WERKS DYNAMAT SOUND CONTROL FAIRING KITS•Get better sound•Stop fairing vibration•Reduce distortion•No measuring, no cutting, easy to install ‑ peel and stick•Fairing kits are custom cut, resulting in no waste and no guesswork

4405‑0192

0521‑1491

4405‑0463

0521‑1493

WINDSHIELDS & FAIRINGS

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS & OIL FILTERS

DASHES & GAUGES

FRAMES & SUSPENSION

FENDERS & LICENSE PLATE FRAMES

FOOTRESTS

WHEELS & AXLES

HARDWARE, COVERS & GENERAL

ELECTRICAL

LIGHTING

FUEL/AIR SYSTEMS

ENGINE

TRANSMISSION & DRIVELINE

GASKETS & SEALS

AUDIO & VIDEO

SADDLEBAGS & LUGGAGE

SEATS & SISSY BARS

EXHAUST

www.dragnetweb.com SECTION 2

All part numbers in BLUE are new for 2017.89

RUMBLE ROAD™ LIMITED NON-AMPLIFIED SPEAKERS•Custom product for motorcycles with existing car-stereo setups•Attractively packaged in chrome or black spotlight shells to enhance the look of most any bike

•4” coaxial full-range, high-performance Alpine speakers•Based on the Amplified Rumble Road™ Ultra speaker system, the non-amplified Rumble Road™ Limited is easily installed on handlebars, engine guards or other locations

•Speakers work with any car-stereo system (either ground or bridged) or separate amplifier to provide high-quality sound on the go or while parked

•140W peak power capacity/ 45W maximum RMS power capacity at 4 ohms, per speaker•Include three-piece mounting clamps in matching finish, wiring and 3’ of black wire dressing•Made in the U.S.A.

NOTE: The non-amplified Rumble Road™ Limited series requires an amplifier-equipped car stereo and is not designed for use with personal stereos. If you plan to use a portable MP3 or other personal stereo instead of a car stereo, check out the Amplified Rumble Road™ Premium and Ultra speaker systems PART #s 4405-0001, 4405-0002, 4405-0382, 4405-0383 or 4405-0384.

2ND GENERATION SOUND OF CHROME™ SPEAKERS•3” main speakers with additional tweeters for full-bodied sound

•Weatherproof bullet speaker housings have built-in 50W amplifier, volume control and on/ off switch

•Convenient swivel adjustment lets you position the speakers on any position for the best sound

•Full plug-and-play wiring harness, noise purifier and standard 3.5mm jack for easy connection of an iPod®, MP3 player or other devices

•Sold in pairs

RUMBLE ROAD™ ULTRA AMPLIFIED STEREO SPEAKERS•Clear and powerful sound, even at highway speeds

•4” coaxial full-range, high-performance Alpine speakers

•Built-in amplifiers and standard stereo mini-plug•Produce approximately 100W Peak Power (70 RMS/ Continuous) into 4 ohms at 13.6 per speaker VDC with high-gain input

•Operate with or without the motorcycle running

•Packaged in attractive chrome or black, with matching stainless steel or black grilles•All hardware, power wiring, audio cabling, black mesh dressing, handlebar-mount volume control and electrical noise filter included

•Work with most smartphones, portable MP3 players and other personal stereos featuring a standard mini-plug headphone jack

•Install easily on handlebars, engine guards or other locations•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL4405-0304 For 1” dia. handlebars $469.99

PART # DESCRIPTION SUG. RETAIL4405-0302 For 11/4” dia. handlebars $469.99

BLUETOOTH® SOUND OF CHROME™ SPEAKERS•New Bluetooth® technology means you can listen to music without having to worry about wires

•Feature 3” main speakers with additional tweeters for full-bodied sound•Weatherproof chrome bullet housings have built-in 50W amplifier, volume control and on/ off control switch

•Swivel adjustment lets you angle the speakers any way you choose•Sold in pairs

PART # DESCRIPTION SUG. RETAILCHROME4405-0270 For 1” diameter handlebars $399.994405-0292 For 11/4” diameter handlebars 399.99

PART # DESCRIPTION SUG. RETAILGLOSS BLACK4405-0272 For 1” diameter handlebars $399.99REPLACEMENT PARTS4405-0440 3.5mm stereo plug harness (ea.) 19.99

PART # DESCRIPTION SUG. RETAIL4405-0380 Chrome w/ 1” mounting hardware $199.954405-0381 Black w/ 1” mounting hardware 199.954405-0385 Chrome w/ 11/4” mounting hardware 199.95

PART # DESCRIPTION SUG. RETAIL4405-0382 Chrome w/ 1” mounting hardware $399.954405-0383 Black w/ 1” mounting hardware 399.954405-0384 Chrome w/ 11/4” mounting hardware 399.95

4405-0382

4405-0383

4405-0381

4405-0380

4405-02724405-0292

4405-0302

www.dragnetweb.comSECTION 2

WINDSHIELDS & FAIRINGS

HANDLEBARS,CONTROLS

& MIRRORS

CABLES

BRAKES

TANKS & OIL FILTERS

DASHES & GAUGES

FRAMES & SUSPENSION

FENDERS & LICENSE

PLATE FRAMES

FOOTRESTS

WHEELS & AXLES

HARDWARE, COVERS & GENERAL

ELECTRICAL

LIGHTING

FUEL/AIR SYSTEMS

ENGINE

TRANSMISSION & DRIVELINE

GASKETS & SEALS

AUDIO & VIDEO

SADDLEBAGS & LUGGAGE

SEATS & SISSY BARS

EXHAUST

All part numbers in BLUE are new for 2017.90

UNIVERSAL USB EXTENSION CABLE•If you ever plan to switch over to an aftermarket radio or head unit and plan on using an MP3 adapter, this handy little cable is a must

•Simply plug this 10’ universal USB male to female extension cable into the radio and run the cable to a pack, keeping your precious audio files safe and sound

PART # DESCRIPTION SUG. RETAIL2120‑0541 Hi‑lo speaker converter $21.95

HI‑LO SPEAKER LEVEL CONVERTER•Bypasses speaker level output settings to use external amp input

•Made in the U.S.A.PART # DESCRIPTION SUG. RETAIL4401‑0072 Audio cable $14.95

AUDIO CABLE•3.3’ (One‑meter) stereo audio cable with 90° ends•Connects your MP3/ Satellite radio/ GPS to the “aux in” on your bike’s radio•High‑quality gold‑plated connectors•Perfect accessory for HF‑Bag (3508‑0019)•Sold each

PART # DESCRIPTION SUG. RETAIL4405‑0001 Chrome w/ 1” mounting hardware $299.95

PART # DESCRIPTION SUG. RETAIL4405‑0002 Black w/ 1” mounting hardware $299.95

RUMBLE ROAD™ PREMIUM AMPLIFIED STEREO SPEAKERS•High‑efficiency stereo speaker system produces crisp and powerful sound, even at highway speeds•Attractively packaged in lustrous chrome or black spotlight shells to enhance the look of almost any motorcycle•Can be installed on handlebars, engine guards or other locations•Work with any smartphone, portable MP3, personal stereo or satellite radio using standard miniplug headphone jack•Approximately 32W continuous, 46W peak into 4 ohms at 13.6 VDC•Includes two 4” amplified JVC speakers, handlebar‑mount volume control, electrical noise filter, all audio cabling and power wiring and 3’ of black wire dressing

•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL4405‑0010 1”, chrome $19.95

PART # DESCRIPTION SUG. RETAIL4405‑0014 1”, black $19.95

PART # DESCRIPTION SUG. RETAIL4405‑0012 11/4”, chrome $19.95

THREE‑PIECE CLAMP SET•Perfect for mounting Rumble Road™ speakers on handlebars or engine guard bars•Clamps separate to slip easily over the bar to the desired mounting location•Sold in pairs

PART # DESCRIPTION SUG. RETAIL2120‑0545 10’ universal USB male‑to‑female extension cable $11.95

PART # DESCRIPTION SUG. RETAIL2120‑0536 3’ amp power cable $4.95

3’ AMP POWER CABLE•3’ RCA cable•High‑performance, oxygen‑free cable features copper conductor, high strand weave and a gold‑plated tip

•Made in the U.S.A.

Chrome Black

4405‑0001

4405‑0002

WINDSHIELDS & FAIRINGS

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS & OIL FILTERS

DASHES & GAUGES

FRAMES & SUSPENSION

FENDERS & LICENSE PLATE FRAMES

FOOTRESTS

WHEELS & AXLES

HARDWARE, COVERS & GENERAL

ELECTRICAL

LIGHTING

FUEL/AIR SYSTEMS

ENGINE

TRANSMISSION & DRIVELINE

GASKETS & SEALS

AUDIO & VIDEO

SADDLEBAGS & LUGGAGE

SEATS & SISSY BARS

EXHAUST

www.dragnetweb.com SECTION 2

All part numbers in BLUE are new for 2017.91

PART # DESCRIPTION SUG. RETAIL2120‑0542 Ground loop isolator $12.95

GROUND LOOP ISOLATOR•Reduces noise caused by ground loops•RCA jacks•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL4405‑0291 Electrical noise filter $9.95

ELECTRICAL NOISE FILTER•Greatly reduces electrical noise or whine produced by some motorcycle electrical/ ignition systems

PART # DESCRIPTION SUG. RETAIL2120‑0535 Amp install kit w/ 10‑gauge wire $41.95

AMP INSTALL KIT W/ 10‑GAUGE WIRE•Kit includes 17’ of 10‑gauge red power wire, 3’ and 15’ RCA cables, 2’ of 10‑gauge black ground wire, 17’ of 18‑gauge blue remote wire and 17’ of 16‑gauge speaker wire

•Also includes ATC‑style heat‑resistant fuse holder, 30‑amp AGU fuse with cable ties and crimp terminals

•Handles up to 600 watts•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL2120‑0534 Amp install kit w/ 8‑gauge wire $53.95

AMP INSTALL KIT W/ 8‑GAUGE WIRE•Kit includes 17’ of 8‑gauge red power wire, 3’ and 15’ RCA cables, 3’ of 8‑gauge black ground wire, 17’ of 18‑gauge blue remote wire and 17’ of 16‑gauge speaker wire

•Also includes AGU‑style heat‑resistant fuse holder, 50‑amp AGU fuse and 6’ of split loom with cable ties and crimp terminals

•Handles up to 900 watts•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL2120‑0602 AMP power plug kit $10.95

AMP POWER PLUG KIT•Water‑tight quick‑disconnect female/ male plug set

•For 10‑gauge power, ground and 16‑18‑gauge remote wire for power amps installed in saddlebags

•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL2120‑0771 06‑10 FLHT, 06‑13 FLHTC, FLHX and FLTR $49.95

REAR SPEAKER PLUG•Allows easy access to factory radios with built‑in rear speaker outputs

•Plugs directly into an empty 35‑pin socket on back of radio•4‑pin plug also plugs into rear input on NCA 450‑AA amplifier (PART #4405‑0338)

•Wires are clearly labelled for easy installation

NOTE: This plug accesses the speaker leads of the radio but does not activate your radio’s built-in fader control. To have your fader enables, you must go to a H-D® dealer and have your radio “reflashed.”

PART # DESCRIPTION SUG. RETAIL2120‑0648 For 11‑17 FXS/ FLS/ FLST, 12‑17 FXD/ FXDWG/ FLD, 14‑17 FLHT/ FLHX/ FLHR and 14‑17 XL models $199.95

PDM60 CANBUS POWER MODULE•Built with components selected for superior power management capability and extended service life

•Makes adding or removing aftermarket electrical devices/ electronics to your CANBUS‑equipped vehicle a breeze

•Simple to install, simple to use•Connects directly to your vehicle battery•Offers six power circuits to handle your favorite gadgets and accessories•Super bright LED indicators keep the rider informed of the status of each circuit•Eliminates the need to install relays to power high‑amperage applications•Fully encapsulated to protect against rain, dust, humidity and other elements•Made in the U.S.A.

PART # DESCRIPTIONSUG.

RETAIL2120‑0628 Rear speaker harness w/ OEM‑type 35‑pin connector $54.952120‑0630 Tour Pak® plug‑and‑play rear speaker harness for all

06‑10 models w/ Harmon Kardon radio and using a factory speaker‑equipped Tour Pak® 109.95

2120‑0770 Tour Pak® plug‑and‑play rear speaker harness for all 11‑13 models w/ Harmon Kardon radio and using a factory speaker‑equipped Tour Pak® 109.95

REAR SPEAKER HARNESSES•Rear speaker harness PART #2120‑0628 allows installation of rear speakers with OEM Harmon Kardon radio; features OEM‑type 35‑pin connector

•Tour‑Pak® plug‑and‑play rear speaker harness PART #s 2120‑0630 and 2120‑0770 fits all models with a Harmon Kardon radio and using a factory speaker‑equipped Tour‑Pak®; allows the use of Tour‑Pak® audio controls

•Made in the U.S.A.

NOTE: Customer will need to have the radio flashed by a dealer to activate rear channels in order for these harnesses to work.

2120‑0628

2120‑0770

www.dragnetweb.comSECTION 2

WINDSHIELDS & FAIRINGS

HANDLEBARS,CONTROLS

& MIRRORS

CABLES

BRAKES

TANKS & OIL FILTERS

DASHES & GAUGES

FRAMES & SUSPENSION

FENDERS & LICENSE

PLATE FRAMES

FOOTRESTS

WHEELS & AXLES

HARDWARE, COVERS & GENERAL

ELECTRICAL

LIGHTING

FUEL/AIR SYSTEMS

ENGINE

TRANSMISSION & DRIVELINE

GASKETS & SEALS

AUDIO & VIDEO

SADDLEBAGS & LUGGAGE

SEATS & SISSY BARS

EXHAUST

All part numbers in BLUE are new for 2017.92

PART # DESCRIPTIONSUG.

RETAILFRONT SPEAKER GRILLES4405-0375 For 14-17 FLHT/ FLHX/ FLHTCU/ FLHTK $29.954405-0377 For 15-17 FLTRX/ FLTRXS/ 16 Road Glide Ultra (black trim) 49.954405-0399 For 15-17 FLTRX/ FLTRXS/ 16 Road Glide Ultra (chrome trim) 79.954405-0379 For 96-13 FLHT/ FLHX/ FLHTCU/ FLHTK 29.95

PART # DESCRIPTIONSUG.

RETAILFRONT SPEAKER GRILLES (CONT)4405-0351 For 98-13 FLTR/ FLTRX $39.95REAR SPEAKER GRILLES4405-0415 For 14-17 FLHTCU/L, FLHTCULTC/ 16-17 Road Glide Ultra and

FLHTK/L factory rear speaker pods 39.95

REPLACEMENT SPEAKER GRILLES•All grilles feature 1mm thick mesh that comes painted semi-gloss black

•Mesh separates easily from trim for painting, powder coating, polishing, etc.

•Grilles can be used with most brands of speakers•Sold in pairs

NOTE: PART #4405-0351 cannot be used to adapt other brands of 5” x 7” speakers to inner fairings.

PART # DESCRIPTION SUG. RETAILFRONT FOR 96-13 FLHTC, FLHX AND H-D FL TRIKE MODELS4405-0097 Speaker grilles $39.95

PART # DESCRIPTION SUG. RETAILREAR FOR 99-13 FLHTCUI/ FLHTCUTG MODELS4405-0151 Speaker grilles $39.95

SPEAKER GRILLES•Dress up your inner fairing with these replacement speaker grilles

•Mesh-cut aluminum grilles use stock hardware

•Sold in pairs•Made in the U.S.A.

SPEAKER GRILLES•CNC-machined billet aluminum construction

•Sold in pairs•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR 14-17 FLHT/ FLHR/ FLHX MODELS (FRONT)4405-0370 Chrome $229.954405-0369 Gloss black powdercoat 229.954405-0371 Black diamond edge 329.95FOR 96-13 FLHT/ FLHTC, FLHTCU/I, FLHX AND H-D FL TRIKE (FRONT)4405-0173 Black diamond edge 284.95

PART # DESCRIPTION SUG. RETAILFOR 98-13 FLTR/ FLTRX (EXCEPT FLTRXSE) (FRONT)4405-0165 Gloss black powdercoat $219.954405-0166 Chrome 219.954405-0174 Black diamond edge 284.95FOR 99-13 FLHTCUI/ FLHTCUTG (REAR)4405-0244 Gloss black powdercoat 289.954405-0245 Chrome 289.95

FINNED

PART # DESCRIPTION SUG. RETAILFOR 14-17 FLHT/ FLHR/ FLHX MODELS (FRONT)4405-0372 Gloss black powdercoat $229.954405-0373 Chrome 229.95FOR 96-13 FLHT/ FLHTC, FLHTCU/I, FLHX AND H-D FL TRIKE (FRONT)4405-0273 Gloss black powdercoat 189.95

PART # DESCRIPTION SUG. RETAILFOR 98-13 FLTR/ FLTRX (EXCEPT FLTRXSE) (FRONT)4405-0275 Gloss black powdercoat $219.954405-0276 Chrome 219.95

DIMPLED

4405-0174

4405-0245

4405-0275

4405-0173

4405-0097

4405-0151

4405-0415

4405-0351

4405-03994405-0377

4405-0379

4405-0375

WINDSHIELDS & FAIRINGS

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS & OIL FILTERS

DASHES & GAUGES

FRAMES & SUSPENSION

FENDERS & LICENSE PLATE FRAMES

FOOTRESTS

WHEELS & AXLES

HARDWARE, COVERS & GENERAL

ELECTRICAL

LIGHTING

FUEL/AIR SYSTEMS

ENGINE

TRANSMISSION & DRIVELINE

GASKETS & SEALS

AUDIO & VIDEO

SADDLEBAGS & LUGGAGE

SEATS & SISSY BARS

EXHAUST

www.dragnetweb.com SECTION 2

All part numbers in BLUE are new for 2017.93

TRI-LINE SPEAKER GRILLS•Replace the stock black honeycomb-shaped covers with sleek, understated Tri-Line styling

•Clean outer frame with a satin black aluminum mesh screen

•Compatible with Harley’s standard and Boom!™ Audio Stage 1 Speakers, simply pop out the old and snap in the new for a complete custom overhaul

•Sold in pairs

PART # DESCRIPTION SUG. RETAILFOR 96-13 FLHT/ FLHX AND H-D FL TRIKE4405-0360 Slot Track, chrome $199.954405-0363 Slot Track, black 199.954405-0361 Deep Cut, chrome 199.95

PART # DESCRIPTION SUG. RETAILFOR 96-13 FLHT/ FLHX AND H-D FL TRIKE (CONT)4405-0364 Deep Cut, black $199.954405-0362 Beveled, chrome 199.954405-0365 Beveled, black 199.95

FRONT SPEAKER GRILLES•Forged billet aluminum construction with machined cutouts/ highlights for a clean, sculpted look

•Add real style to your inner fairing•Sold in pairs•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR 15-17 FLTRX/ FLTRXS/ FLTRU4405-0419 Chrome $79.99

PART # DESCRIPTION SUG. RETAILFOR 15-17 FLTRX/ FLTRXS/ FLTRU (CONT)4405-0420 Black $79.99

PART # DESCRIPTION SUG. RETAIL4405-0188 For 98-13 FLTR/ FLTRX $49.99

SPEAKER GRILLES•Chrome grilles install in just minutes and add a real custom touch•Round three-spoke grille inserts can be substituted with Kuryakyn’s 2” Gauge Bezels (sold separately)

•Grilles sold in pairs

PART # DESCRIPTION SUG. RETAILFOR 14-16 FLHT, FLHX AND FLHTCUTG MODELS4405-0394 Zombie $34.994405-0395 Flame 34.994405-0396 Vortex 34.994405-0398 Corona 34.99

PART # DESCRIPTION SUG. RETAILFOR 96-13 FLHT, 06-13 FLHX AND H-D FL TRIKE (EXCEPT 11-12 FLHXSE, 12-13 FLHTCUSE)4405-0184 Zombie 29.994405-0185 Flame 29.994405-0186 Widow 29.994405-0248 Firefighter 29.99

FRONT SPEAKER ACCENTS•Add visual punch to your dash•Simple installation•Chrome finish•Sold in pairs

4405-0360 4405-0364

4405-0420

4405-0184

4405-0185

4405-0186

4405-0248

4405-0362

4405-0419

4405-0396 4405-0398

www.dragnetweb.comSECTION 2

WINDSHIELDS & FAIRINGS

HANDLEBARS,CONTROLS

& MIRRORS

CABLES

BRAKES

TANKS & OIL FILTERS

DASHES & GAUGES

FRAMES & SUSPENSION

FENDERS & LICENSE

PLATE FRAMES

FOOTRESTS

WHEELS & AXLES

HARDWARE, COVERS & GENERAL

ELECTRICAL

LIGHTING

FUEL/AIR SYSTEMS

ENGINE

TRANSMISSION & DRIVELINE

GASKETS & SEALS

AUDIO & VIDEO

SADDLEBAGS & LUGGAGE

SEATS & SISSY BARS

EXHAUST

All part numbers in BLUE are new for 2017.94

PART # DESCRIPTION SUG. RETAILSPEAKER TRIM4405-0421 W/ LED lights $159.954405-0422 W/o LED lights 69.95

PART # DESCRIPTION SUG. RETAILMANUAL ENCODER2050-0243 Ciro Shock & Awe manual encoder $49.95

LED CHROME FRONT SPEAKER ACCENTS•Chrome speaker accents available with or without LED lights•LED version supplies a million color options when used with Ciro’s Shock & Awe manual encoder (available separately) or Bluetooth controller•If used with Ciro Shock & Awe Bluetooth controller PART #2040-1825 you can have the fairing accessories on one channel and your bike LEDs on another channel, giving you millions of options for color, brightness and functions

•Accents sold in pairs; Shock & Awe encoder individually•Patent pending

PART # DESCRIPTION SUG. RETAIL4405-0425 For 14-17 FLHT/ FLHX/ FLHTCUTG models $29.95

PART # DESCRIPTION SUG. RETAIL4405-0426 For 96-13 FLHT/ FLHX/ FLHTCUTG models $29.95

SPEAKER ACCENTS•Chrome finish gives a great look to the front speakers

•Easy to install; no special tools required•Sold as a pair

PART # DESCRIPTION SUG. RETAIL2202-0063 For 96-13 FLT/ FLHT/ FLHX and H-D FL trike $29.95

CHROME SPEAKER BEZELS•Formed from aluminum and chrome plated•Easily attach with included trim tape•Complement the Drag instrument bezels•Sold in pairs

PART # DESCRIPTION SUG. RETAILFOR 96-13 FLHT/ FLHX/ FLHTCUTG4405-0358 Chrome $129.994405-0357 Gloss black 129.99

LED SPEAKER BEZELS•Featuring state of the art blue illumination•Available in chrome or gloss black finishes•Great match to Kuryakyn LED Speedo and Tach Bezels•Sold in pairs

PART # DESCRIPTION SUG. RETAIL4405-0249 For 98-13 FLHTCU $29.99

REAR SPEAKER ACCENTS•Chrome trim rings install over the stock black speaker rings•Include polished stainless steel hardware•Sold in pairs

FOR 14-17 FLHT/ FLHTX/ FLHTCU/ FLHTK (EXCEPT STAGE-2 BOOM AUDIO FAIRING SPEAKERS)

4405-0421

4405-0422

4405-0426

4405-0358

WINDSHIELDS & FAIRINGS

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS & OIL FILTERS

DASHES & GAUGES

FRAMES & SUSPENSION

FENDERS & LICENSE PLATE FRAMES

FOOTRESTS

WHEELS & AXLES

HARDWARE, COVERS & GENERAL

ELECTRICAL

LIGHTING

FUEL/AIR SYSTEMS

ENGINE

TRANSMISSION & DRIVELINE

GASKETS & SEALS

AUDIO & VIDEO

SADDLEBAGS & LUGGAGE

SEATS & SISSY BARS

EXHAUST

www.dragnetweb.com SECTION 2

All part numbers in BLUE are new for 2017.95

PART # DESCRIPTION SUG. RETAIL4401‑0042 Antenna $22.95

TOP/ SIDE MOUNT RUBBER‑MAST ANTENNA WITH CABLE•Rubber gasket allows watertight seal•Angle adjustment up to 90°•14” tall antenna with attached 59” cable•For universal use or as replacement•Not for use with 14-17 Dresser models

PART # DESCRIPTION SUG. RETAIL4401‑0050 Universal 6” antenna $24.95

6” HEAVY‑DUTY UNIVERSAL TOP/ SIDE‑MOUNT RUBBER MAST ANTENNA•Attached 39” cable•6” rubber mast top/ side-mount antenna•Rubber gasket for watertight mounting•Withstands tough environments with its heavy-duty design

•Antenna angles 45° maximum•Not for use with 14-17 Dresser Models

PART # DECRIPTION SUG. RETAIL4401‑0163 Antenna $19.95

AM/FM AMPLIFIED ANTENNA•Combines remarkable reception and installation ease

•Designed for demanding AM/FM listeners•Includes a 7 ft. cable•Measures 141/2” W x 7/8” H x 3/4” D•Not for use with 14-17 Dresser Models

PART # DESCRIPTION SUG. RETAIL4401‑0201 For 14-17 FLHT/ FLHX/ FLHTCUTG $28.954401‑0200 For 09-13 FLT/ FLHT/ FLHR/ FLTR/ FLHX 26.954401‑0202 For 89-08 FLT/ FLHT/ FLHR/ FLTR/ FLHX 26.95

SHORTY AM/FM/CB/WB ANTENNAS•Shorty antennas come out of the package pre-tuned for all AM/FM CB and WB frequencies, owners don’t need to worry about which side of the tail trunk or rear fender to mount them on

•The performance improvement compared to stock Harley is especially significant for the CB radio band transmission distance

•Installation is a snap, simply unscrew the stock Harley antenna and screw on the new J&M shorty

•Both long and short antenna tip cover options are included, with a total overall length of approximately 17”

•Sold each

PART # DESCRIPTION SUG. RETAIL4401‑0188 Whip antenna $17.95

WHIP ANTENNA•Direct OEM replacement for H-D® radio antennas•14” L and screws into OEM antenna mounts•Not intended to replace CB antenna

PART # DESCRIPTION SUG. RETAIL4401‑0019 HogTenna pre-amplified antenna $44.95

HOGTENNA PRE‑AMPED ANTENNA•Di-pole antenna has directional gain over vertical mast antennas

•Factory power connectors are used to make installation a snap on most Harley-Davidson touring bikes

•Not for use with 14-17 Dresser models

PART # DESCRIPTION SUG. RETAIL4401‑0027 “Rubber Duck” antenna $24.95

“RUBBER DUCK” ANTENNA•Helically wound, 14” flexible black rubber antenna•Provides performance similar to longer vertical-mast antenna•Screw-on installation; attaches to the OEM radio antenna mount

PART # DESCRIPTION SUG. RETAILFOR 89‑17 FLT/ FLHT/ FLHR/ FLTR/ FLHX AND H‑D FL TRIKES4401‑0140 Round/ grooved w/ two-tone black/ raw aluminum finish $39.994401‑0141 Round/ grooved w chrome finish 39.994401‑0142 Hex/ grooved w/ two-tone black/ raw aluminum finish 39.99

BILLET ANTENNAS•No more bent/ broken antennas•Billet aluminum construction•Rubber over-molded spring base allows the antenna to flex if bumped or hit•Measure 12” L; direct replacement for the OEM antenna•Pick up AM/FM signals only (no CB)

PART # DESCRIPTIONSUG.

RETAIL4401‑0070 Tour-Pak® mount antenna for 89-17 FLHT/ FLTR/

FLHX and H-D FL Trike w/ AM/FM radio and CB kit $29.99

DUAL‑FUNCTION FLEXIBLE ANTENNA•Get range and clarity for your AM, FM and CB radio without the mile-high stock antenna

•Compact, flexible antenna measures only 17” L•Tuned for its specific mounting location – no calibration needed

4401‑0140

4401‑01414401‑0142

4401‑0200

4401‑0201

www.dragnetweb.comSECTION 2

WINDSHIELDS & FAIRINGS

HANDLEBARS,CONTROLS

& MIRRORS

CABLES

BRAKES

TANKS & OIL FILTERS

DASHES & GAUGES

FRAMES & SUSPENSION

FENDERS & LICENSE

PLATE FRAMES

FOOTRESTS

WHEELS & AXLES

HARDWARE, COVERS & GENERAL

ELECTRICAL

LIGHTING

FUEL/AIR SYSTEMS

ENGINE

TRANSMISSION & DRIVELINE

GASKETS & SEALS

AUDIO & VIDEO

SADDLEBAGS & LUGGAGE

SEATS & SISSY BARS

EXHAUST

All part numbers in BLUE are new for 2017.96

PART # DESCRIPTION SUG. RETAIL4402-0096 27mhz pre-tuned CB hide-away for for 06-13 FLT/ FLHT/ FLTR/H-D Trike fairings w/ factory H-D CB radio $89.954402-0097 27mhz pre-tuned CB hide-away for for 98-13 FLT/ FLHT/ FLTR/H-D FL Trike fairings w/ J&M or other aftermarket radio using

the PL-259 connector 89.95

FLEXPOWER™ HIDE-AWAY ANTENNAS•Designed for H-D fairings with factory H-D or aftermarket radio or CB•Easy plug-in installation; no wires to cut or splice•Include detailed installation instructions

4402-0097

4402-0096

4402-0097

PART # DESCRIPTION SUG. RETAIL4401-0168 For 14-17 FLHT/ FLHX/ FLHTCUTG models $49.95

PART # DESCRIPTION SUG. RETAIL4401-0167 For 89-13 FLHT/ FLHX/ FLTR models $44.95

PASSIVE FLEXPOWER HIDE-AWAY AM/FM/WB ANTENNAS•Designed specifically for models with the factory Harley® radio•All three reception bands of AM, FM and WB, to help you altogether eliminate the rear-mounted antenna on your Harley

•Installation is a snap, as there are no wires to cut or splice, and antenna wire lead is secured in the fairing with included double-sided tape clips

•Include complete and detailed installation instructions

4401-0167

PART # DESCRIPTION SUG. RETAILDS250034 Hidden antenna $80.95

ELECTRONIC HIDDEN ANTENNA•Finally, a hidden internal antenna that really works•Mounts inside any fiberglass or plastic fairing•Plugs into any standard AM/FM antenna jack•Requires a switched 12V power source•Not for use with 14-17 Dresser models

NOTE: Antenna will not receive Weather Band frequencies.

PART # DESCRIPTION SUG. RETAIL4402-0070 CB antenna mount kit for 09-13 FLHT/ FLHTC/ FLHTCU (except H-D FL Trike) $98.954402-0048 CB antenna kit for 85-08 FLHT/I, FLHTC/I, FLHTCU/I 98.954402-0058 Radio antenna mount kit for 85-13 FLHT models (except H-D FL Trike) 79.95

LOW MOUNT ANTENNA RELOCATION KITS•An affordable way to relocate the antenna down low and out of the way of the detachable luggage rack or the tour pack on radio-equipped baggers

•No need to change the location of the antenna every time the tour pack is installed or removed from the bike•Kit includes all hardware and polished stainless steel bracket

•Mounts to the rear fender support brackets; may fit on some models with saddlebag fillers

•Made in the U.S.A.

NOTE: Not for models with rear fender fascia.

PART # DESCRIPTION SUG. RETAIL4401-0204 Antenna cap $19.95

ALUMINUM ANTENNA STUD CAP•Covers the stock antenna stud when the stock antenna is relocated

•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL4401-0164 48” $6.95

UNIVERSAL AM/FM ANTENNA EXTENSION CABLE•Compatible with all JENSEN antennas•Includes impedance matching capacitor•48” in length•Designed for use with AM/FM stereos•Not for use with 14-17 Dresser Models

4402-0070

4402-0048

4402-0058

WINDSHIELDS & FAIRINGS

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS & OIL FILTERS

DASHES & GAUGES

FRAMES & SUSPENSION

FENDERS & LICENSE PLATE FRAMES

FOOTRESTS

WHEELS & AXLES

HARDWARE, COVERS & GENERAL

ELECTRICAL

LIGHTING

FUEL/AIR SYSTEMS

ENGINE

TRANSMISSION & DRIVELINE

GASKETS & SEALS

AUDIO & VIDEO

SADDLEBAGS & LUGGAGE

SEATS & SISSY BARS

EXHAUST

www.dragnetweb.com SECTION 2

All part numbers in BLUE are new for 2017.97

WASPCAM COMPONENTS AND ACCESSORIES continued on next page

PART # DESCRIPTION SUG. RETAIL MAN. # 99021 99041 9905 9906 CAMO 9907 GOPRO®

4402-0491 7/8” tubing clamp $39.99 9965 Yes Yes Yes Yes Yes Yes4402-0492 1” tubing clamp 42.99 9966 Yes Yes Yes Yes Yes Yes4402-0493 11/8” tubing clamp 44.99 9967 Yes Yes Yes Yes Yes Yes4402-0494 11/4” tubing clamp 44.99 9968 Yes Yes Yes Yes Yes Yes4402-0495 11/2” tubing clamp 46.99 9969 Yes Yes Yes Yes Yes Yes4402-0496 13/4” tubing clamp 48.99 9970 Yes Yes Yes Yes Yes Yes4402-0497 2” tubing clamp 49.99 9971 Yes Yes Yes Yes Yes Yes4402-0540 2-in-1 portable hand grip/ tripod 24.99 9923 Yes Yes Yes Yes Yes Yes4402-0474 Adhesive anchor and tether 6.99 9944 Yes Yes Yes Yes Yes Yes4402-0564 AV cable 7.99 9804 No No Yes Yes No No4402-0665 Battery charger, dual 29.95 9812 No No Yes Yes Yes No

WASPCAM COMPONENTS AND ACCESSORIES•Replacement components and accessories for WASPcam models•Aluminum billet clamps are titanium anodized and require GoPro® adapter 4402-0498 to attach to WASPcam camera

•PART #4402-0501 is a sleek, lightweight and durable carbon-fiber wrapped “stubby” pole that attaches directly to a WASPcam (also requires GoPro® adapter PART #4402-0498 to attach to WASPcam camera), allowing for excellent handheld control of the camera; a great tool for users who are trying to capture that perfect “selfie”

•Included with every Stubby is a short tether strap, designed to wrap around a user’s wrist, offering added security in case things get rough on the road, trail or slopes

•PART #4402-0502 is constructed from lightweight aluminum and extends from 12” to 26.5” inches; also includes handle grip and wireless wrist remote holder

PART # DESCRIPTION SUG. RETAIL4402-0674 9907 4K WASPCAM action sports camera $329.95

9907 4K WASPCAM ACTION SPORTS CAMERA•Waterproof without a case down to 98’•Records HD video up to 4K/ 24fps; also records 1440p/ 30fps, 1080p/ 60fps, 1080p/ 30fps, 720p/ 120fps, and 720p/ 60fps

•New video time-lapse feature allows users to shoot time-lapse videos at either 1, 3, 5, 10, 30, 60 second intervals

•Loop recording and an auto looping function, which allows the camera to be used as a dash camera•Up to 20MP photo quality; 12MP also available•Built-in Wi-Fi connects camera to WASPcam app•1.5” LCD Screen•Sharp 4X 2.8f lens has a wide 170° view angle•White balance controls include auto, daylight, cloudy, tungsten, fluorescent/ underwater•Anti-shaking technology

PART # DESCRIPTION SUG. RETAIL4402-0673 9906 camo WASPCAM sports action camera $279.95

9906 CAMO WASPCAM SPORTS ACTION CAMERA•Ability to turn off all camera lights and sounds for stealthy filming•Waterproof without a case down to 98’•Records HD video up to 1440p/ 30fps; also records 1080p/ 60fps, 1080p/ 30fps, 720p/ 120fps, 720p/ 60fps, VGA/ 240fps

•Loop recording and an auto looping function, which allows the camera to be used as a dash camera

•New video time-lapse feature allows users to shoot time-lapse videos at either 1, 3, 5, 10, 30, 60 second intervals

•Up to 16MP photo quality•Built-in Wi-Fi connects camera to WASPcam app•1.5” LCD screen•Two LED safety lights•Sharp 4X 2.8f lens has a wide 170° view angle•White balance controls include auto, daylight, cloudy, tungsten, fluorescent/ underwater•Anti-shaking technology

PART # DESCRIPTION SUG. RETAIL4402-0559 9905 WASPCAM camera $199.99

9905 WASPCAM CAMERA•Waterproof without a case down to 98 feet•Records HD video at 1080p30, 720p60fps, WVGA 60fps and VGA 120fps •Includes a wireless wrist remote that controls video and photo recording up to 15 feet away

•Up to 12-Megapixel photo quality with options for 5MP or 8MP•Auto-looping function records over itself for automobile applications or continuous video recording

•WiFi built-in for live viewing on a smartphone•Two LED safety lights can set the lights to off, on/ steady, or flashing •Automatically starts recording when powered on

4402-04914402-0540

4402-0474

4402-0564 4402-0665

1 Discontinued model.

www.dragnetweb.comSECTION 2

WINDSHIELDS & FAIRINGS

HANDLEBARS,CONTROLS

& MIRRORS

CABLES

BRAKES

TANKS & OIL FILTERS

DASHES & GAUGES

FRAMES & SUSPENSION

FENDERS & LICENSE

PLATE FRAMES

FOOTRESTS

WHEELS & AXLES

HARDWARE, COVERS & GENERAL

ELECTRICAL

LIGHTING

FUEL/AIR SYSTEMS

ENGINE

TRANSMISSION & DRIVELINE

GASKETS & SEALS

AUDIO & VIDEO

SADDLEBAGS & LUGGAGE

SEATS & SISSY BARS

EXHAUST

All part numbers in BLUE are new for 2017.98

PART # DESCRIPTION SUG. RETAIL MAN. # 99021 99041 9905 9906 CAMO 9907 GOPRO®

4402-0432 Bicycle mount kit for 31.8 Bar, heavy duty $79.99 9928 Yes Yes Yes Yes Yes Yes4402-0460 Bicycle mount kit for 31.8 Bar, medium duty 58.99 9927 Yes Yes Yes Yes Yes No4402-0541 Bicycle under-seat mount 39.99 9924 Yes Yes Yes Yes Yes Yes4402-0434 Camera mount w/ LED light and case 79.99 9998 Yes Yes Yes Yes Yes Yes4402-0542 Case connector 5.99 9925 Yes Yes Yes Yes Yes No4402-0562 Clear protective lens 12.99 9802 No No Yes Yes Yes No4402-0480 Curved adhesive socket 9.99 9950 Yes Yes Yes Yes Yes Yes4402-0563 Diving lens 12.99 9803 No No Yes Yes Yes No4402-0536 Dog-harness mount 59.99 9919 Yes Yes Yes Yes Yes Yes4402-0502 Extending pole mount 49.99 9976 Yes Yes Yes Yes Yes Yes4402-0389 Extreme backpack 189.99 9977 Yes Yes Yes Yes Yes Yes4402-0481 Flat adhesive socket 9.99 9951 Yes Yes Yes Yes Yes Yes4402-0531 Flat/ curved sockets (Pack of 4) 9.99 9914 Yes Yes Yes Yes Yes Yes4402-0391 Flex rod 4mm - 10” connecters 54.99 9992 Yes Yes Yes Yes Yes Yes4402-0392 Flex rod 4mm - 14” connecters 54.99 9993 Yes Yes Yes Yes Yes Yes4402-0390 Flex rod 4mm - 6” connecters 49.99 9991 Yes Yes Yes Yes Yes Yes4402-0393 Flex rod 5mm - 20” connecters 69.99 9994 Yes Yes Yes Yes Yes Yes4402-0568 Gigastone 32GB memory card 29.99 9808 Yes Yes Yes Yes Yes Yes4402-0667 GPS kit, 4K 49.95 9814 No No No No Yes No4402-0528 Hand mount 24.99 9911 Yes Yes Yes Yes Yes Yes4402-0566 HDMI cable 12.99 9806 No No Yes Yes No No4402-0526 In-Car micro USB hard wire kit 20.99 9909 Yes Yes Yes Yes Yes No4402-0533 Jaws and flex clamp mount 49.99 9916 Yes Yes Yes Yes Yes Yes4402-0534 Jaws mount 29.99 9917 Yes Yes Yes Yes Yes Yes4402-0412 LVD wrist remote USB pogo-pin charger 12.99 9996 Remote onlyNo No No No No4402-0537 Mesh storage bag (12” x 8”) 5.99 9920 Yes Yes Yes Yes Yes Yes4402-0499 Mount screw (custom) 14.99 9973 Yes Yes Yes Yes Yes Yes4402-0543 Mount screw (Plastic) 3.99 9973 Yes Yes Yes Yes Yes Yes4402-0620 Outdoor utility mount (fits 10.2 mm - 22.8 mm tubes) 49.95 9809 Yes Yes Yes Yes Yes Yes4402-0647 Power stubbie mount 79.95 9810 Yes Yes Yes Yes Yes Yes4402-0561 Replacement battery 15.99 9801 No No Yes Yes Yes No4402-0669 Side bracket, 4K 9.95 9816 No No No No Yes No

WASPCAM COMPONENTS AND ACCESSORIES (CONT)

4402-0541 4402-0434 4402-0542 4402-0562 4402-0480 4402-0563

4402-0536 4402-0481 4402-0531 4402-0390 4402-0568

4402-0667 4402-0566 4402-0526

4402-0533

4402-0534 4402-0412

4402-0537 4402-0499 4402-0543 4402-0620 4402-0647 4402-0561 4402-0669

4402-0460

4402-0528

4402-0502

1 Discontinued model.

WINDSHIELDS & FAIRINGS

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS & OIL FILTERS

DASHES & GAUGES

FRAMES & SUSPENSION

FENDERS & LICENSE PLATE FRAMES

FOOTRESTS

WHEELS & AXLES

HARDWARE, COVERS & GENERAL

ELECTRICAL

LIGHTING

FUEL/AIR SYSTEMS

ENGINE

TRANSMISSION & DRIVELINE

GASKETS & SEALS

AUDIO & VIDEO

SADDLEBAGS & LUGGAGE

SEATS & SISSY BARS

EXHAUST

www.dragnetweb.com SECTION 2

All part numbers in BLUE are new for 2017.99

PART # DESCRIPTION SUG. RETAIL4402‑0389 Extreme backpack $189.99

WASPCAM EXTREME BACKPACK•Includes a 14” L aluminum Flexrod pole mount that attaches inside the pack

•Mount can be twisted or bent to capture a variety of camera angles

•Pole is flexible enough to bend by hand, but won’t lose its shape even on the roughest rides

•Optional length Flexrod poles available separately

•Flexrod pole mounts require camera mount PART # 4402-0498 to connect a camera

PART # DESCRIPTION SUG. RETAIL4402‑0376 ToughCam digital wireless observation system $599.95

TOUGHCAM DIGITAL WIRELESS OBSERVATION SYSTEM•ToughCam Digital Wireless observation system allows you to monitor the inside of your trailer as you are driving down the road

•Waterproof camera provides a 117° viewing angle•IR LED lights allow for optimal viewing in low-light conditions

•Features a 5.6” suction cup mounted screen•Simple installation; monitor plugs into any 12V cigarette lighter, camera can be wired to any 12V power source

WASPCAM COMPONENTS AND ACCESSORIES (CONT)

PART # DESCRIPTION SUG. RETAIL MAN. # 99021 99041 9905 9906 CAMO 9907 GOPRO®

4402‑0672 Side cap/ tether, waterproof 4K $9.95 9819 No No No No Yes No4402‑0527 Shoulder mount 25.99 9910 Yes Yes Yes Yes Yes Yes4402‑0535 Side mount 20.99 9918 Yes Yes Yes Yes Yes Yes4402‑0560 SST suction cup mount 34.99 9800 Yes Yes Yes Yes Yes Yes4402‑0501 Stubbie carbon pole 39.99 9975 Yes Yes Yes Yes Yes Yes4402‑0539 Suction cup mount (Pro-Series) 29.99 9922 Yes Yes Yes Yes Yes Yes4402‑0532 Tactical-style grip mount 29.99 9915 Yes Yes Yes Yes Yes Yes4402‑0500 Travel Case (formed) 34.99 9974 Yes Yes Yes Yes Yes Yes4402‑0477 Tripod adapter (standard) 5.99 9947 Yes Yes Yes Yes Yes No4402‑0666 USB cable, 4K 9.95 9813 No No No No Yes No4402‑0670 USB cable, 4K waterproof (6’7”) 19.95 9817 No No No No Yes No4402‑0671 USB cable, 4K waterproof (2’) 14.95 9818 No No No No Yes No4402‑0371 USB charging cable 7.99 9958 Yes Yes Yes Yes No No4402‑0664 USB charging cable, waterproof (2’) 14.95 9811 No No Yes Yes Yes No4402‑0668 Video cable, 4K 9.95 9815 No No No No Yes No4402‑0498 WASPcam case GoPro adapter 19.99 9972 Yes Yes Yes Yes Yes No4402‑0567 Waterproof cap seal/ tether replacement 5.99 9807 No No Yes Yes Yes No4402‑0565 Waterproof USB cable 9.99 9805 No No Yes Yes No No4402‑0472 WFD – WASPcam flotation device 12.99 9942 Yes Yes No No No No4402‑0433 Wrist mount 25.99 9929 Yes Yes Yes Yes Yes Yes1 Discontinued model.

4402‑0535 4402‑0560 4402‑0501 4402‑0539 4402‑0532

4402‑0500 4402‑0477 4402‑0666 4402‑0670 4402‑0371 4402‑0668

4402‑0567 4402‑0565 4402‑0472 4402‑04334402‑0498

4402‑0672

4402‑0527

www.dragnetweb.comSECTION 2

WINDSHIELDS & FAIRINGS

HANDLEBARS,CONTROLS

& MIRRORS

CABLES

BRAKES

TANKS & OIL FILTERS

DASHES & GAUGES

FRAMES & SUSPENSION

FENDERS & LICENSE

PLATE FRAMES

FOOTRESTS

WHEELS & AXLES

HARDWARE, COVERS & GENERAL

ELECTRICAL

LIGHTING

FUEL/AIR SYSTEMS

ENGINE

TRANSMISSION & DRIVELINE

GASKETS & SEALS

AUDIO & VIDEO

SADDLEBAGS & LUGGAGE

SEATS & SISSY BARS

EXHAUST

All part numbers in BLUE are new for 2017.100

PART # DESCRIPTION SUG. RETAILSMARTPHONE HOLDER W/ CHARGER4402-0573 No mount $59.954402-0589 W/ brake/ clutch perch mount for 84-17 H-D models (except 14-17 FLHX models), chrome 94.954402-0590 W/ brake/ clutch perch mount for 84-17 H-D models (except 14-17 FLHX models), black 94.954402-0591 W/ 7/8” and 1” handlebar mount, chrome 84.954402-0592 W/ 7/8” and 1” handlebar mount, black 84.954402-0593 W/ 11/4” handlebar mount, chrome 84.954402-0594 W/ 11/4” handlebar mount, black 84.954402-0597 W/ mirror mount for all H-D models w/o clutch reservoir (except models w/ fairing-mounted mirrors) 84.954402-0595 W/ fairing mount for 96-13 FLHT/ FLHX/ FLTR/ FLHR/ FLHTCUTG models (except 07-13 Screamin’ Eagle), black 94.954402-0596 W/ fairing mount for 14-17 FLHT/ FLHX/ FLHTCUTG models, black 94.95SMARTPHONE HOLDER W/O CHARGER4402-0574 No mount 34.954402-0598 W/ brake/ clutch perch mount for 84-17 H-D models (except 14-17 FLHX models), chrome 64.954402-0599 W/ brake/ clutch perch mount for 84-17 H-D models (except 14-17 FLHX models), black 64.954402-0600 W/ 7/8” and 1” handlebar mount, chrome 64.954402-0601 W/ 7/8” and 1” handlebar mount, black 64.954402-0602 W/ 11/4” handlebar mount, chrome 64.954402-0603 W/ 11/4” handlebar mount, black 64.954402-0606 W/ mirror mount for all H-D models w/o clutch reservoir (except models w/ fairing-mounted mirrors) 69.954402-0604 W/ fairing mount for 96-13 FLHT/ FLHX/ FLTR/ FLHR/ FLHTCUTG models (except 07-13 Screamin’ Eagle), black 59.954402-0605 W/ fairing mount for 14-17 FLHT/ FLHX/ FLHTCUTG models, black 59.95

SMARTPHONE/ GPS HOLDERS•Deluxe smartphone/ GPS holder available with or without charger•Charger model has 1.3 USB port for on-board charging as you ride (cable not included)•Quick and simple ambidextrous design lets you just flip the lever to lock smartphone into the secure rubber molded fingers

•Infinite adjustment with Ciro ball-mount design•Intuitive ball mounting system allows for a broad range of angle adjustment•Fit devices from 21/8” – 31/2” wide•Patent pending

PART # DESCRIPTION SUG. RETAIL4402-0575 Brake/ clutch perch mount for 84-17 H-D models

(except 14-17 FLHX models), chrome $28.954402-0576 Brake/ clutch perch mount for 84-17 H-D models

(except 14-17 FLHX models), black 28.954402-0577 7/8” and 1” handlebar mount, chrome 19.954402-0578 7/8” and 1” handlebar mount, black 19.954402-0579 11/4” handlebar mount, chrome 19.954402-0580 11/4” handlebar mount, black 19.954402-0582 Fairing mount for 14-17 FLHT/ FLHX and FLHTCUTG 23.954402-0581 Fairing mount for 96-13 FLHT/ FLHX and FLHTCUTG 23.95

PART # DESCRIPTION SUG. RETAIL4402-0583 Universal ball mount for 1/4”-20 bolt $19.954402-0584 Mirror mount for all H-D models without clutch

resevoir (except models with fairing-mounted mirrors) 23.954402-0585 GoPro camera adapter for Ciro ball mounting system 16.954402-0586 Camera/ GPS kit allows camera/ GPS to be mounted to

any Ciro ball stud 24.954402-0587 Universal ball mount works with any tube from

7/8” - 21/4” or 11/8” - 13/4”, black 27.954402-0612 GoPro and Wasp camera adapter for Ciro ball

mounting system 36.95

ACCESSORY MOUNTS•Keep Ciro device holders, cup/ drink holders, cameras and more close at hand

•Handlebar mounts eliminate ugly pins and hinges used in traditional clamps

•Perch mounts can be used on right or left side; fully adjustable mounting system

•Fairing mount is perfect for GPS units; mount on top of fairing to help keep your eyes on the road

•Patent pending

4402-05734402-0590

4402-0597 4402-0601

4402-0605

4402-0612

4402-0583

4402-0586

4402-0577

4402-0575

WINDSHIELDS & FAIRINGS

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS & OIL FILTERS

DASHES & GAUGES

FRAMES & SUSPENSION

FENDERS & LICENSE PLATE FRAMES

FOOTRESTS

WHEELS & AXLES

HARDWARE, COVERS & GENERAL

ELECTRICAL

LIGHTING

FUEL/AIR SYSTEMS

ENGINE

TRANSMISSION & DRIVELINE

GASKETS & SEALS

AUDIO & VIDEO

SADDLEBAGS & LUGGAGE

SEATS & SISSY BARS

EXHAUST

www.dragnetweb.com SECTION 2

All part numbers in BLUE are new for 2017.101

PART # DESCRIPTION SUG. RETAILHANDLEBAR PERCH MOUNT KITS FOR 96‑16 ALL W/ STOCK CONTROLS0636‑0047 Left hand, chrome $99.950636‑0048 Left hand, black 99.950636‑0103 Right hand, chrome 99.950636‑0104 Right hand, black 99.950636‑0105 Builder’s kit 79.95

PART # DESCRIPTION SUG. RETAILHANDLEBAR CLAMP MOUNT KITS FOR 84‑16 ALL W/ 3.5” CENTER TO CENTER RISER0636‑0053 Chrome $179.950636‑0054 Black 179.95UNIVERSAL MOUNT KITS0636‑0055 Nomad 59.95 PART # DESCRIPTION SUG. RETAIL

OPTIONAL MAGNETIC iOcore0636‑0037 Green iOcore $19.950636‑0038 Black iOcore 19.950636‑0039 Blue iOcore 19.950636‑0040 Gray iOcore 19.950636‑0041 Orange iOcore 19.950636‑0042 Pink iOcore 19.95

PART # DESCRIPTION SUG. RETAILOPTIONAL MAGNETIC iOcore (CONT)0636‑0043 Red iOcore $19.950636‑0044 Yellow iOcore 19.95REPLACEMENT COMPONENTS (EA,)0636‑0046 iOskin 4.950636‑0045 iOadapt disc 9.95

KLOCK WERKS DEVICE MOUNTS•Easy to install motorcycle model specific mounts that incorporate the iOmounts™ system•Install mount on bike with included hardware•Attach razor-thin iOadapt stainless steel adapter to your device and connect to the powerful iOcore magnetic carrier•No special case needed. Device is held in place by the strong iOcore magnet and can be adjusted to preferred angle•iOskin provides perfect surface to mount iOadapt, and protects device•Purchase additional iOadapt discs to use multiple devices on same mount•Nomad fits on any bar that is .5” to 2” in diameter (universal mount)•Builders Kit includes everything needed to mount the system on most flat surfaces; one semi-sphere, one iOcore (black), two iOadapt stainless steel disks, two iOskin, 1/4 x20 bolt and washer to mount semi-sphere

•Handlebar Clamp Riser Mount works with any 3.5” center to center riser

NOTE: Not for use with Samsung Galaxy S4 phones

0636‑0053

0636‑0047

0636‑0054

0636‑0048

0636‑0055

0636‑0037Magnetic iOcore

0636‑0045

0636‑0105

www.dragnetweb.comSECTION 2

WINDSHIELDS & FAIRINGS

HANDLEBARS,CONTROLS

& MIRRORS

CABLES

BRAKES

TANKS & OIL FILTERS

DASHES & GAUGES

FRAMES & SUSPENSION

FENDERS & LICENSE

PLATE FRAMES

FOOTRESTS

WHEELS & AXLES

HARDWARE, COVERS & GENERAL

ELECTRICAL

LIGHTING

FUEL/AIR SYSTEMS

ENGINE

TRANSMISSION & DRIVELINE

GASKETS & SEALS

AUDIO & VIDEO

SADDLEBAGS & LUGGAGE

SEATS & SISSY BARS

EXHAUST

All part numbers in BLUE are new for 2017.102

Step 1 Step 2 Step 3 Step 4

RAM MOUNTING SYSTEMS•Offer the most complete selection of mounting solutions designed specifically for motorcycles, ATV/ UTVs, snowmobiles and personal watercraft•RAM’s patented rubber ball and socket design is ideally suited for these high-vibration applications•In addition, the ball and socket design allows the user to adjust their mounted device to the perfect viewing angle quickly and easily•RAM will give you the ability to help you mount your cell phone, Go Pro camera, GPS device and much moreFOUR STEPS TO CONFIGURING YOUR MOUNT:STEP 1: PICK A BASESTEP 2: PICK AN ARMSTEP 3: PICK AN ADAPTER STEP 4: PICK A CRADLE

RAM MOUNT UNIVERSAL BASES•Marine-grade aluminum with a black powder-coat finish•1” rubber ball•Mirror post base fits any open mirror mount hole on motorcycles with relocated mirrors

•Mounting hardware includedPART # DESCRIPTION SUG. RETAIL0603‑04581 Handlebar U-bolt/ brake/ clutch perch mount (.5-1.25” diameter) $22.950603‑0459 U-bolt mount (.5-1.25” diameter) 16.950603‑04622 Adhesive mount 14.950603‑04633 3/8”-16 post mount 9.950603‑0501 1/4”-20 mirror post mount 17.950636‑0058 Brake/ clutch reservoir base w/ 1” balls 20.950636‑0060 Handlebar/ rail base for 3/4” - 1” dia. rails 19.950636‑0061 Handlebar/ rail base for 11/8” - 11/2” dia. rails 21.951 Includes 2: 1/4” 20 x 2”, and 2: 6mm x 55mm screws for American and Metric thread applications.2 High-strength composite.3 Natural finish.

1” BALL MOUNT SUCTION CUP BASE•Made from high-strength composite and powder-coated marine grade aluminum•31/4” twist locking suction cup base for an extra-strong hold•1” rubber ball mount•Connects to a large variety of RAM Mount and other cradles

NOTE: For best results, use suction cup on glass or other non-porous plastic surfaces.

PART # DESCRIPTION SUG. RETAIL2350‑0230 1” suction cup base $18.95

0603‑0458

0603‑0459

0603‑0462

0603‑0463

0636‑0058

0603‑05010636‑0060

WINDSHIELDS & FAIRINGS

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS & OIL FILTERS

DASHES & GAUGES

FRAMES & SUSPENSION

FENDERS & LICENSE PLATE FRAMES

FOOTRESTS

WHEELS & AXLES

HARDWARE, COVERS & GENERAL

ELECTRICAL

LIGHTING

FUEL/AIR SYSTEMS

ENGINE

TRANSMISSION & DRIVELINE

GASKETS & SEALS

AUDIO & VIDEO

SADDLEBAGS & LUGGAGE

SEATS & SISSY BARS

EXHAUST

www.dragnetweb.com SECTION 2

All part numbers in BLUE are new for 2017.103

PART # DESCRIPTION SUG. RETAIL0603‑0470 High‑strength composite $25.95

DOUBLE SOCKET ARM WITH SWIVEL•High‑strength composite•Consists of double 1” diameter open‑ball sockets with a 360° rotation point at the center and a connecting swivel joint that rotates forward and back 180°

•The rubber ball and socket at either end and a central pivot point provide unsurpassed adjustability

•The RAM ball sockets maximize ball coverage for optimal fit

•5” overall length

RAM DOUBLE SOCKET ARMS•Marine‑grade aluminum with a black powder‑coated finish

•Fit 1” rubber ball, bases and adapters

PART # DESCRIPTION SUG. RETAIL0603‑0467 Short 2” $15.950603‑0468 Medium 3” 15.950603‑0469 Long 5.2” 23.95

RAM MOUNT ADAPTERS•Marine‑grade aluminum with a black powder‑coat finish

•1” rubber ball•Predrilled holes in bases allow mounting to a variety of arms and cradles

PART # DESCRIPTION SUG. RETAIL0603‑0471 Ball w/ adapter AMPS hole $9.950603‑0472 Ball w/ adapter diamond‑shaped 9.95

RAM DOUBLE 1” BALL ADAPTER•Marine‑grade aluminum with a 1” rubber ball on each end•Allows the connection of two 1” socket arms•When measured from ball center to ball center, the arm length is 1.75”•Ideal if your mount arm is too short

PART # DESCRIPTION SUG. RETAIL0603‑0496 Marine‑grade aluminum $17.95

RAM LOCKING KNOB•Replaces the existing knob on the socket arm

•Locks the arm firmly in place and gives added security

PART # DESCRIPTIONSUG.

RETAIL0603‑0495 Marine‑grade

aluminum $27.95

RAM UNIVERSAL CAMERA AND CAMCORDER ADAPTERS•PART #0603‑0473 consists of a 1” diameter rubber ball, connected to a round base with 1/4”‑20 camera thread

•PART #0603‑0474 consists of a 1” diameter rubber ball, connected to a 2.5” diameter round base with 1/4”‑20 thread

•The round base provides extra support and stability for cameras that rest on top of it

•The male 1/4”‑20 threaded steel stud will connect to any standard female thread found on camcorders and digital cameras

•Compatible cameras include Contour GPS, Contour HD, Gobandit GPS‑HD, GoPro HD helmet HERO, GoPro HD Motorsports HERO, GoPro HD Surf HERO, GoPro Helmet HERO Wide, GoPro Motorsports HERO, GoPro Motorsports HERO Wide, GoPro RC HERO, GoPro Surf Hero and GoPro Wide HERO

GOPRO® CAMERA ADAPTER•High‑strength composite construction

•Consists of a 1”  diameter rubber ball, connected to a custom GoPro® adapter

•Patented rubber ball design dampens shock and vibration, helping to extend the life of your camera

•Multiple articulation and adjustment points for perfect viewing angles

•Attaches directly to the under‑side of the camera, replacing the factory mounting bracket

•Compatible with GoPro® cameras including HD HERO, HD HERO2, HD HERO3 and HD HERO 960

•Mounts to many RAM double‑socket arms and mounts (sold separately)

NOTE: Camera not included.

PART # DESCRIPTION SUG. RETAIL0603‑0475 High‑strength composite $13.95

RAM MOUNT PISTOL HOLDER AND CRADLE•Marine‑grade aluminum with a black powder‑coat finish

•Includes hardware to connect the holder and cradle to any RAM‑compatible mount

•Contents not included

NOTE: Does not come with ball mount adapter; use PART #0603-0471 to mount to RAM double socket arm.

PART # DESCRIPTION SUG. RETAIL0603‑0487 Marine‑grade aluminum with a black powder‑coat finish $22.95

RAM SELF‑LEVELING CUP HOLDER AND COZY WITH 1” BALL•The perfect accessory for any vehicle including motorcycles and ATVs

•Includes a 1” rubber ball for easy mounting to any arm•Easy installation and positions to keep your favorite beverage within reach

•Comes with a RAM can insulator

PART # DESCRIPTION SUG. RETAIL0603‑0476 RAM self‑leveling cup holder and cozy $19.95

PART # DESCRIPTION SUG. RETAIL0603‑0473 High‑strength composite $11.95

PART # DESCRIPTION SUG. RETAIL0603‑0474 Marine‑grade aluminum 12.95

0603‑0471

0603‑0472

0603‑04730603‑0474

0603‑0468

www.dragnetweb.comSECTION 2

WINDSHIELDS & FAIRINGS

HANDLEBARS,CONTROLS

& MIRRORS

CABLES

BRAKES

TANKS & OIL FILTERS

DASHES & GAUGES

FRAMES & SUSPENSION

FENDERS & LICENSE

PLATE FRAMES

FOOTRESTS

WHEELS & AXLES

HARDWARE, COVERS & GENERAL

ELECTRICAL

LIGHTING

FUEL/AIR SYSTEMS

ENGINE

TRANSMISSION & DRIVELINE

GASKETS & SEALS

AUDIO & VIDEO

SADDLEBAGS & LUGGAGE

SEATS & SISSY BARS

EXHAUST

All part numbers in BLUE are new for 2017.104

RAM CRADLES FOR PHONES AND GPS•High-strength composite construction•Include a set of two nuts and bolts to connect to any of the RAM-compatible mounts

•Contents not included

NOTE: Does not come with ball mount adapter; use PART #0603-0472 to mount to RAM double socket arm.

PART # DESCRIPTION SUG. RETAILAPPLE0603‑0486 iPhone® 4 w/o case, skin or sleeve/ iPhone 4S w/o case, skin or sleeve $10.950603‑0493 iPhone® 5 w/o case, skin or sleeve 9.950603‑0564 iPhone® 5C w/o case, skin or sleeve 9.950603‑0643 iPhone® 6 w/o case, skin or sleeve 12.950603‑0644 iPhone 6 Plus w/o case, skin or sleeve 12.95GARMIN0603‑0488 Astro 220/ GPS 60/ GPSMAP 60/ 60C/ 60CSx/ 60Cx 11.950603‑0491 Astro® 320/ GPSMAP 62/ 62s/ 62sc/ 62st/ 62stc 10.950603‑0568 eTrex Legend® 10/20/30 12.950603‑0483 eTrex Legend® C/Cx/ HCx/ Venture Cx/Hc/ Vista C/Cx/ HCx 14.950603‑0567 Montana® 600/ 650/ 650t 11.950603‑0494 nüvi® 50/ 50LM 11.950603‑0489 nüvi® 200/ 205/ 250/ 255/ 260/ 265T/ 270 12.950603‑0482 nüvi® 200W/ 205W/ 220/ 250W/ 255W/ 260W/ 265W/ 265WT/ 285WT/ 2455LMT/ 2475LT/ 2495LMT/ 465T 11.950603‑0481 nüvi® 500/ 510/ 550/ Zumo 220 13.950603‑0490 nüvi® 1300/ 1310T/ 1350/ 1350T/ 1370T/ 1390/ 1390T/ 2455LT/ 2455LMT/ 2475LT/ 2495LMT 12.950603‑0480 nüvi® 1440/ 1450/ 1490T 13.950603‑0566 nüvi® 2300 series 11.950603‑0569 nüvi® 2595LMT 11.950603‑0565 Oregon™ 200/ 300/ 400c/ 400i/ 400t/ 550/ 550t 10.950603‑05701 zumo™ 400/ 450/ 500/ 550/ 660 7.95SPOT0603‑0479 SPOT IS™ satellite GPS messenger/ SPOT satellite GPS messenger 12.950603‑05701 Rider 2/ Urban Rider 7.95TOM TOM0603‑0492 ONE XL/ XLS 12.951 Includes 1” diameter rubber ball.

0603‑0493

0603‑0564 0603‑0644

0603‑0488

0603‑0491

0603‑0568

0603‑0483

0603‑0567

0603‑04940603‑0489 0603‑0482 0603‑0481

0603‑0490 0603‑0480 0603‑05660603‑0569

0603‑0565

0603‑05700603‑0479

0603‑0492

WINDSHIELDS & FAIRINGS

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS & OIL FILTERS

DASHES & GAUGES

FRAMES & SUSPENSION

FENDERS & LICENSE PLATE FRAMES

FOOTRESTS

WHEELS & AXLES

HARDWARE, COVERS & GENERAL

ELECTRICAL

LIGHTING

FUEL/AIR SYSTEMS

ENGINE

TRANSMISSION & DRIVELINE

GASKETS & SEALS

AUDIO & VIDEO

SADDLEBAGS & LUGGAGE

SEATS & SISSY BARS

EXHAUST

www.dragnetweb.com SECTION 2

All part numbers in BLUE are new for 2017.105

X-GRIP® IV LARGE PHONE/ PHABLET CRADLE•High-strength composite and stainless steel construction•Spring-loaded holder expands and contracts for perfect fit•Feature a clean and clever four-leg design that sports great holding power•Rubber coated tips will hold device firm and stable•Versatility of holder allows for attachment to many RAM ball mounts•Compatible and interchangeable with a wide range of popular RAM Mounting products (sold separately)•1” rubber ball, “B” size•Phone/ Phablet holder dimensions: minimum width, 1.75” and maximum width, 4.5”PART # DESCRIPTION SUG. RETAIL0603-0571 For HTC Droid DNA/ Huawei Ascend P1/LG Intuition / Nokia Lumia 920/ Pantech Vega No. 6/ Samsung GALAXY Mega 5.8/

Samsung GALAXY Mega 6.3/ Samsung Galaxy Note/ Samsung Galaxy Note 2/ Samsung Galaxy Note 3 $31.95REPLACEMENT COMPONENTS0603-0645 Replacement post caps (4-pk.) 6.950603-0686 X-grip phablet replacement tether 3.95

X-GRIP® KITS•High-strength composite and stainless steel construction and powder-coated marine-grade aluminum•Include a 1” diameter patented rubber ball and socket system with adjustment points at both ends of the socket arm; this, with a twist of the arm knob, allows you to move the X-Grip® mount to optimum viewing position

•Spring-loaded holder expands and contracts for perfect fit of device•Rubber-coated tips will hold device firm and stable•The mounting hardware for brake/ clutch reservoirs include both standard and metric mounting bolts•Kits include U-bolts that fit bars from 1/2” to 11/4” in diameter•Socket technology allows for multiple adjustment angles and articulation of device•Include all necessary mounting hardware•Include a device tether •Compatible with devices (with or without case) that measure 1.875” minimum width, 3.25” maximum width and 0.875” depth•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR iPHONE® 6, 5S, 5C, 5, 4S, 4, 3GS, 3G, iPOD® TOUCH (ALL MODELS), iPOD® G1-G5, SAMSUNG GALAXY S5 AND S40603-0614 Combination brake/ clutch reservoir U-bolt mount $62.950603-0615 Handlebar rail mount with U-bolt base 57.95REPLACEMENT COMPONENTS0603-0645 Replacement post caps (4-pk.) 6.950603-0685 X-grip replacement tether 3.95

0603-0614

0603-0615

0603-0645

0603-0685

0603-0571

0603-05710603-0645

0603-0686

www.dragnetweb.comSECTION 2

WINDSHIELDS & FAIRINGS

HANDLEBARS,CONTROLS

& MIRRORS

CABLES

BRAKES

TANKS & OIL FILTERS

DASHES & GAUGES

FRAMES & SUSPENSION

FENDERS & LICENSE

PLATE FRAMES

FOOTRESTS

WHEELS & AXLES

HARDWARE, COVERS & GENERAL

ELECTRICAL

LIGHTING

FUEL/AIR SYSTEMS

ENGINE

TRANSMISSION & DRIVELINE

GASKETS & SEALS

AUDIO & VIDEO

SADDLEBAGS & LUGGAGE

SEATS & SISSY BARS

EXHAUST

All part numbers in BLUE are new for 2017.106

RAM UNIVERSAL X-GRIP® CELL PHONE CRADLE WITH 1” BALL•High-strength composite and rustproof marine-grade stainless steel construction

•Spring-loaded holder expands and contracts for perfect fit on your device

•Rubber-coated tips will hold device firm and stable•Includes 1” ball; mount adapter is not required•Versatility of holder allows for attachment to many RAM arms

•Compatible devices: Apple iPhone® 5 with or without case/ sleeve, Apple iPhone® 4S with or without case/ sleeve, Apple iPhone® 4 with or without case/ sleeve, Apple iPhone® 3GS with or without case/ sleeve, Apple iPhone® 3G with or without case/ sleeve, Apple iPhone® with or without case/ sleeve, Apple iPod® touch (all models) with or without case/ sleeve, Apple iPod® (G1-G5), and Samsung GALAXY S4 with or without case/ sleeve

•Compatible with handheld devices that will fit holder dimensions: minimum width of 1.875”, maximum width of 3.25” and a depth of 0.875”

•It is important to verify the dimensions of your handheld device with a case/ sleeve/ skin when determining the overall size

•Contents not included•X-Grip includes a device tether

PART # DESCRIPTION SUG. RETAIL0603-0478 RAM Universal X-Grip™ $28.950603-0645 4-pk. replacement post caps for all X-Grips® cradles 6.950603-0685 X-grip replacement tether 3.95

RAM UNIVERSAL FINGER-GRIP™ CRADLE•This mount is designed to hold cell phones (check measurements below for dimensions), 2-way radios and GPS devices

•Works with OtterBox (Defender, Commuter, Impact) Cases, phones with bumper, and twisted metal case•High-strength composite•Comes with three sets of four flexible rubber-coated fingers placed along the sides to grip your device•The fingers open by squeezing the ends of the holder•The bottom of the holder includes a back plate that adds support to the device being held by the mount•Can also be used with several other phone accessories, including Samsung and LG•The spine plate contains the universal AMPS and 1.5” x 2” hole patterns•Height dimensions: minimum with top and bottom plates is 5.25” and maximum with top and bottom plates is 6.0”•The top and bottom plates can be removed for larger devices•Spine plate dimensions: 3” W x 3” H•Using short-arm side clamps: maximum depth is 0.75”, minimum width is 1.25” and maximum width is 3.0”•Using medium-arm side clamps: maximum depth is 1.25”, minimum width is 1.5” and maximum width is 3.5”•Using long-arm side clamps: maximum depth is 1.6”, minimum width is 2.25” and maximum width is 3.5”

NOTE: Does not come with ball mount adapter; use PART #0603-0472 to mount to RAM double-socket arm.

PART # DESCRIPTION SUG. RETAIL0603-0477 High-strength composite $25.95 RAM SEALED-ENCLOSURE AQUA BOX®

•High-strength composite construction•Small and large sizes include AQUA Box® case, safety lanyard, belt clip button, belt-clip and cradle (attaches to RAM ball-and-socket mounts)

•Medium size includes AQUA Box® case and cradle only

•Float to prevent accidental loss if dropped in water

•Features a storage area that provides buoyancy and is perfectly sized for a driver’s license or credit card

•Weather-resistant/ splashproof•Unique patented design allows access to all side buttons on the phone while it is in the case

•Replaceable PVC vinyl screen offers a clear view of the screen, allowing easy operation of the touch screen while in the case

•Easy to pocket or carry•Text, take photos/ video and make/ take calls, all while protecting your phone

•Contents not included

NOTE: Does not come with ball mount adapter; use PART #0603-0471 to mount to RAM double-socket arm.

PART # DESCRIPTION SUG. RETAIL0603-0485 Small AQUA Box Pro 10; fits smartphones up to 4.58” H x 2.46” W x 0.47” D $43.950603-0563 Medium AQUA Box Pro 20; fits smartphones up to 4.9” H x 2.33” x 0.35” D 30.950603-0484 Large AQUA Box Pro 20; fits smartphones up to 5.38” H x 2.8” W x 0.55” D 42.95

0603-0484

0603-0485

0603-06850603-0478

0603-0645

WINDSHIELDS & FAIRINGS

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS & OIL FILTERS

DASHES & GAUGES

FRAMES & SUSPENSION

FENDERS & LICENSE PLATE FRAMES

FOOTRESTS

WHEELS & AXLES

HARDWARE, COVERS & GENERAL

ELECTRICAL

LIGHTING

FUEL/AIR SYSTEMS

ENGINE

TRANSMISSION & DRIVELINE

GASKETS & SEALS

AUDIO & VIDEO

SADDLEBAGS & LUGGAGE

SEATS & SISSY BARS

EXHAUST

www.dragnetweb.com SECTION 2

All part numbers in BLUE are new for 2017.107

PART # DESCRIPTION SUG. RETAIL4402‑0324 Control perch mount, black $39.954402‑0646 Control perch mount, chrome 54.95

TECHMOUNT® ACCESSORY MOUNTS•A beautiful, functional system for mounting accessories to your motorcycle

•Compatible with almost any device•All mounts (except handlebar-style mount) include a mount plate pre-drilled for the 4 AMPS pattern; device-specific mount plates and accessories sold separately

•Made in the U.S.A.

UNIVERSAL STEERING STEM MOUNT KIT•Pivot-style mount shaft so you can adjust the mounted device to your preferred viewing angle

•Shaft length is 2” H (installed); 1” H from stem nut to pivot

FAIRING MOUNT KIT•Mounts to the fairing surface on H-D Touring motorcycles•May be mounted on the left or right side•Features standard 2.25” x 3” mount plate with 4-hole AMPS pattern•Pivot-style mount shaft so you can adjust the mounted device to your preferred viewing angle

•Mount extends outward 1.5” from fairing surface when installed

HANDLEBAR MOUNT KIT•Clamp-on style mount fits all handlebar diameters from 7/8” to

1/4” diameter•Has 17mm ball mount that allows the installed device to be easily placed at the preferred viewing angle

•Mount extends outward .75” from the handlebar when installed•Available with or without an articulating arm

PART # DESCRIPTION SUG. RETAIL4402‑0319 Universal steering stem mount (6-pc.) $29.95

PART # DESCRIPTION SUG. RETAIL4402‑0321 H-D fairing mount $49.95

PART # DESCRIPTIONSUG.

RETAIL4402‑0323 Universal handlebar mount, black $39.954402‑0644 Universal handlebar mount w/ articulating arm, black 39.954402‑0645 Universal handlebar mount w/ articulating arm, chrome 54.95

PART # DESCRIPTION SUG. RETAIL4402‑0325 Mirror mount $39.95

CONTROL PERCH MOUNT KIT•Attaches to the handle control clamps on the clutch or brake side•Includes new stainless steel bolts and spacers to replace the factory pinch bolts

•Pivot-style mount shaft so you can adjust the mounted device to your preferred viewing angle

•Mount extends outward 1” from the handlebar when installed

MIRROR MOUNT KIT•Attaches to unused mirror mount hole found on some H-D Touring models

•Pivot-style mount shaft so you can adjust the mounted device to your preferred viewing angle

•Mount extends outward 1” from the handlebar when installed

4402‑03254402‑0324

4402‑0323

4402‑0319 4402‑0321

4402‑0323 4402‑0323

4402‑0645

www.dragnetweb.comSECTION 2

WINDSHIELDS & FAIRINGS

HANDLEBARS,CONTROLS

& MIRRORS

CABLES

BRAKES

TANKS & OIL FILTERS

DASHES & GAUGES

FRAMES & SUSPENSION

FENDERS & LICENSE

PLATE FRAMES

FOOTRESTS

WHEELS & AXLES

HARDWARE, COVERS & GENERAL

ELECTRICAL

LIGHTING

FUEL/AIR SYSTEMS

ENGINE

TRANSMISSION & DRIVELINE

GASKETS & SEALS

AUDIO & VIDEO

SADDLEBAGS & LUGGAGE

SEATS & SISSY BARS

EXHAUST

All part numbers in BLUE are new for 2017.108

PART # DESCRIPTION SUG. RETAIL4402‑0327 3” L pivoting 17mm ball shaft (black) $9.954402‑0328 3” L pivoting 17mm ball shaft (silver) 14.954402‑0331 Universal camera mount adapter

(for use w/ 17mm ball shaft) (black) 7.95

PART # DESCRIPTION SUG. RETAIL4402‑0332 Two‑hole diamond adapter for RAM® cradle

(for use w/ 17mm ball shaft) (black) $7.954402‑0333 Mount adapter for GoPro camera

(for use w/ 17mm ball shaft) (black) 14.95

TECHMOUNT ACCESSORIES•Constructed of 6061 T‑6 aluminum•Stainless steel hardware•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL4402‑0313 Fits Garmin Zumo 660 Custom GPS $18.954402‑0326 Radar detector plate; has anti‑slip pads and safety strap (uses 17mm ball socket adapter) 18.954402‑0329 2.25” x 1.875” top plate w/ 4‑hole AMPS pattern pre‑drilled 4.95

TOP PLATE•Constructed of 6061 T‑6 aluminum with a black finish•Replaces the standard top plate•Works with TechMount kits•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL4402‑0330 Universal

phone/ iPod® cradle $19.95

CELL PHONE/ iPod® ACCESSORY CRADLE•Adjustable black cradle for mounting devices like a cell phone, iPod®, GPS, etc.

•Includes safety strap, two‑pin adapter and holder

•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL4402‑0419 Techgripper universal device holder $39.95

TECHGRIPPER CRADLE UNIVERSAL DEVICE HOLDER•Personal device cradle to securely hold your cell phone to your motorcycle•Holds any cell phone from 2.1” to 3.8” wide•Available in black•Mounts sold separately•Made in the U.S.A.

4402‑0313

4402‑0326

4402‑0329

4402‑0327

4402‑0328

4402‑0331

4402‑0332

4402‑0333

WINDSHIELDS & FAIRINGS

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS & OIL FILTERS

DASHES & GAUGES

FRAMES & SUSPENSION

FENDERS & LICENSE PLATE FRAMES

FOOTRESTS

WHEELS & AXLES

HARDWARE, COVERS & GENERAL

ELECTRICAL

LIGHTING

FUEL/AIR SYSTEMS

ENGINE

TRANSMISSION & DRIVELINE

GASKETS & SEALS

AUDIO & VIDEO

SADDLEBAGS & LUGGAGE

SEATS & SISSY BARS

EXHAUST

www.dragnetweb.com SECTION 2

All part numbers in BLUE are new for 2017.109

PART # DESCRIPTION SUG. RETAIL0603‑0429 W/ rubber strap mount (fits 3/4” to 13/4” dia. handlebars $35.990603‑0430 W/ handlebar clamp mount (fits 3/4”, 1” or 11/4” dia. handlebars) 49.99

TECH CONNECT POUCHES WITH MOUNT•Mounts electronic devices to the handlebars in just seconds

•Pouch conforms to the shape of your device for a snug fit

•Audio and charging ports•Included foam pad provides a secure fit for all devices

•PART #0603-0429 features rubber strap quick-disconnect mount

•PART #0603-0430 features a quick-release handlebar mount with swivel-adjust head for easy removal and viewing when on the bike

PART # DESCRIPTION SUG. RETAILSTANDARD STYLE (BLACK MOUNT AND MOUNT PLATE)0603‑0415 Handlebar mount, for 7/8”, 1” or 11/4” dia. handlebars $34.990636‑0015 Handlebar mount, for 1” dia. handlebars 39.990603‑0416 Clutch/ brake perch mount, for 82-16 H-D clutch or

brake perch 39.990603‑0417 Fairing mount, for 96-16 FLHT/ FLHX and H-D FL Trikes 39.992350‑0216 Windshield mount for most H-D and aftermarket

fairings and windshields 39.990603‑0521 Mirror mount for top of clutch or brake perch mounts 49.99STANDARD STYLE (CHROME MOUNT AND MOUNT PLATE)0636‑0016 Clutch/ brake perch mount, for 82-16 H-D clutch or

brake perch 49.99

PART # DESCRIPTION SUG. RETAILPREMIUM CHROME (CHROME MOUNT WITH BLACK MOUNT PLATE)0603‑0418 For 11/4” dia. handlebars $39.990603‑0520 Mirror mount for top of clutch or brake perch mounts 69.99PREMIUM XL CHROME (CHROME MOUNT WITH CHROME MOUNT PLATE)0603‑0374 For 1” dia. handlebars 59.990603‑0386 For 11/4” dia. handlebars 59.99TECH CONNECT DEVICE HOLDER ONLY (DOES NOT INCLUDE MOUNT)0603‑0419 Standard size (fits devices 15/8” to 35/8” W) 34.990603‑0420 Large size (fits devices 35/8” to 6” W) 34.99

TECH CONNECT SYSTEM•The easy, fast, secure way to mount your iPhone®, smart phone, GPS or other electronic device to your handlebar, windshield or fairing

•Adjustable swivel head allows ideal positioning of the device for easy viewing•Quick-disconnect design allows removal in just seconds•Available as complete kits; mounts and device holders also sold separately so you can customize the system to meet your needs

•Kits include standard Tech Connect device holder and standard mount•Standard mount measures 23/8” x 17/8”•Mounts and device holders sold each•If you do not order a complete kit, you must order one mount and one device holder for a complete assembly

•Device holders are designed to hold the Kuryakyn Tech Connect, Tech Connect Pouch, Ram device holder or any other device with an AMPS 4-hole mount pattern

•Not for use with Kuryakyn Accessory Pouches•Tech Connect holders available in two sizes to fit almost any electronic device; see chart•Premium XL mount measures 21/2” x 33/4”; pivot plate has additional mounting slots and hook-and-loop straps, accepts most belt clips

PART # DESCRIPTION SUG. RETAILCOMPLETE KITS0603‑0421 Fairing mount kit for 96-13 FLHT/ FLHX and H-D FL Trikes (left side) $64.994402‑0296 Fairing mount kit for 96-13 FLHT/ FLHX and H-D FL Trikes (right side) 64.990603‑0422 Clutch/ brake perch mount kit for 82-13 H-D Original Equipment clutch or brake perch 64.990603‑0423 Handlebar mount kit for 7/8”, 1” or 11/4” dia. handlebars 64.990603‑0515 Large perch mount kit 64.994402‑0510 Chrome perch mount kit 75.99 MOUNT KITS ONLY (DO NOT INCLUDE DEVICE HOLDER)

0603‑0419

0603‑04230603‑0421 0603‑0422 0603‑0515

0603‑05200603‑05214402‑0510

0603‑0429

0603‑0430

www.dragnetweb.comSECTION 2

WINDSHIELDS & FAIRINGS

HANDLEBARS,CONTROLS

& MIRRORS

CABLES

BRAKES

TANKS & OIL FILTERS

DASHES & GAUGES

FRAMES & SUSPENSION

FENDERS & LICENSE

PLATE FRAMES

FOOTRESTS

WHEELS & AXLES

HARDWARE, COVERS & GENERAL

ELECTRICAL

LIGHTING

FUEL/AIR SYSTEMS

ENGINE

TRANSMISSION & DRIVELINE

GASKETS & SEALS

AUDIO & VIDEO

SADDLEBAGS & LUGGAGE

SEATS & SISSY BARS

EXHAUST

All part numbers in BLUE are new for 2017.110

FUEL DOOR GPS/ ACCESSORY MOUNT•Adjustable bracket accepts most devices that use a cradle with four-hole AMPS pattern, RAM cradles or Kuryakyn accessory pouches

•Replaces stock hinged fuel door•Provides a stable and easily accessible place to mount a GPS, satellite radio or other electronic device

•Also accepts items that mount with a belt clip (MP3 players, cell phones)

•Available in a chrome finish

FAIRING MOUNT TECH-CONNECT® DEVICE MOUNTING SYSTEM•Easily mount and secure an iPhone®, iPod®, smartphone, GPS, or small device right off the left side of the fairing for easy access

•Adjustable swivel head allows movement for perfect positioning and disconnects in seconds

•Holds devices from 15/8” to 35/8”

PART # DESCRIPTION SUG. RETAIL0603-0399 For 1” dia. handlebars $18.990603-0404 For 11/4” dia. handlebars 19.99

PART # DESCRIPTION SUG. RETAIL0603-0452 Clamp for 3/4, 5/8” and 1/2” bars $19.990603-0453 Handlebar accessory perch mount 26.99

ACCESSORY MOUNTS•Universal for Kuryakyn handlebar-mount accessories

•Chrome finish•5/16” thru hole•Sold each

PART # DESCRIPTION SUG. RETAIL4402-0387 Akron® gadget holder $29.99

ARKON® GADGET HOLDER•Has a water-resistant pouch that keeps a GPS or Smartphone protected from the elements

•Mega-grip holder keeps it secure yet readily accessible

•Included handlebar clamp mount fits for 1” to 11/4” outside diameter handlebars

•Compatible with most Smartphones and GPS units

UNIVERSAL ACCESSORY POUCH WITH MOUNT•A great way to carry small items and keep them within easy reach

•Large, clear viewing window makes it easy to read LCD screens and allows the full use of touchscreen devices

•Pouch comes with a universal quick-detach rubber mounting strap that fits round bars from 1/2” –13/4” in diameter

•Keeps the handlebars clean when removed•Sold each

PART # DESCRIPTION SUG. RETAIL0603-0407 Small pouch (31/2” H x 21/4” W x 3/4” D) $32.994402-0511 Large pouch (41/2” H x 31/2” W x 3/4” D) 32.990603-0431 X-large pouch (41/4” H x 61/4” W x 3/4” D) 32.99

PART # DESCRIPTION SUG. RETAIL2310-0648 For 14-17 FLHT/ FLHX and FLHTCUTG models $64.99

PART # DESCRIPTION SUG. RETAIL4402-0286 For 92-07 FLT/ FLHT/ FLTR/ FLHX $109.994402-0287 For 08-17 FLHT/ FLTR/ FLHX and H-D FL Trike 109.99

0603-0399 0603-0453

0603-0431

4402-0511

4402-0286

WINDSHIELDS & FAIRINGS

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS & OIL FILTERS

DASHES & GAUGES

FRAMES & SUSPENSION

FENDERS & LICENSE PLATE FRAMES

FOOTRESTS

WHEELS & AXLES

HARDWARE, COVERS & GENERAL

ELECTRICAL

LIGHTING

FUEL/AIR SYSTEMS

ENGINE

TRANSMISSION & DRIVELINE

GASKETS & SEALS

AUDIO & VIDEO

SADDLEBAGS & LUGGAGE

SEATS & SISSY BARS

EXHAUST

www.dragnetweb.com SECTION 2

All part numbers in BLUE are new for 2017.111

PART # DESCRIPTION SUG. RETAIL2350‑0225 Windshield GPS mount w/ 1/4”‑20 stud threading $29.95

GPS WINDSHIELD MOUNT•Easy to install – just remove the stud on your windshield and screw it on•Flats on two sides make it easy to use a wrench for tightening•Total length is 23/8” (perfect for clearing the windshield “arc”)•On the GPS end, the 17mm ball (same size ball as a car mount) utilizes your stock GPS cradle or the socket‑mounting hole on the back of your unit and rotates/ tilts just as it does in your car

•Available with 1/4”‑20 stud threading as used on most non‑H‑D windshields

•Fitment includes many Garmin Nuvi and Magellan Roadmate GPS•Made of stainless steel•Made in the U.S.A.

NOTE: Your GPS must accept the 17mm size to use this kit; often that means an extra piece that came in your GPS kit (or that can be purchased separately) that “clips” onto the GPS.PART # DESCRIPTION SUG. RETAIL

0603‑0438 For 1” bars $59.950603‑0441 For 96‑16 H‑D controls 54.95

eCADDY™ GARMIN NUVI GPS BALL MOUNT•The simple, classy way to mount a Garmin Nuvi GPS•All parts are made to last – machined aluminum with chrome plating and stainless steel; no plastic parts

•Will not scratch bars•Faceted lug on the stem provides six mounting options to choose from

•17mm ball (same size ball as a car mount) utilizes a stock Nuvi cradle or the socket‑mounting hole on the back of the unit; just snap the cradle or unit directly into the ball mount

•Kit includes: mounting stem with 17mm ball and mounting bracket with UltraSecurity feature

•Holders fit left side or right side of most 1” bars, or a mount for most 96‑16 Harley‑Davidson handlebar control clamps with 11/2” screw spacing

•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL0603‑0502 Tri Grip mount $129.95

TRI‑GRIP PHONE/ GPS MOUNT FOR 1” BARS•Three‑prong design holds your device firmly•Rubber “fangs” for excellent grip to most cases•Accommodates almost any case or holster (or phone alone)

•Can be mounted in portrait OR landscape position

•Fits devices from 2.75”‑3.5” W x 7” L •Comfortably accommodates a depth up to 1”•Ultra‑Swivel provides unlimited angle ability•UltraSecure and Get the Vibe Out features are built in

•Holders fit left side or right side of most 1” bars•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL0603‑0742 Chrome $85.95

PART # DESCRIPTION SUG. RETAIL0603‑0743 Black $79.95

STANDARD URBAN MOUNTS•Fits 1’ to 1.25” bars•Mount fits any phone with or without a case up to 4.5” in height and 3.25” in width (mininum width is 2”)

•The universal cradle’s “ratchet” design is fully adjustable with open side arms for easier button accessibility; a soft, no‑slip plate for better grip and slideable feet to adjust for power or other plugs/ buttons

•Ball design makes angle adjustment simple•Includes: mounting bracket wit hardware; ball stem with adaptor; and holding cradle

•All hardware is made in the U.S.A. of aluminum and stainless steel

PART # DESCRIPTION SUG. RETAIL0603‑0744 Chrome $101.95

PART # DESCRIPTION SUG. RETAIL0603‑0745 Black $95.95

CADDY BUDDY WATERPROOF URBAN MOUNTS•Phone/ iPod Mounts for 1” to 1.25” bars

•Mounts are ideal if your riders are looking for protection from rain/ water but want their mounts to look sleek, slim and unobtrusive

•The clear front covers allow touch and slide operations; hook‑and‑loop‑material flap keeps rain out; and wires can be run out the upper corner if desired

•Ball design makes it easy to mount vertically or horizontally, and even change‑on‑the‑fly

•Fit phones up to 4.5” in height and 3.25” in width (min. = 2”)•Depth capability depends in part on size of phone; best under 1/2”

•Includes: mounting bracket with hardware; ball stem and adapter and Caddy Buddy waterproof case

•Made in the U.S.A.

0603‑0742

0603‑0743

0603‑0745

0603‑0744

0603‑0438 0603‑0441

www.dragnetweb.comSECTION 2

WINDSHIELDS & FAIRINGS

HANDLEBARS,CONTROLS

& MIRRORS

CABLES

BRAKES

TANKS & OIL FILTERS

DASHES & GAUGES

FRAMES & SUSPENSION

FENDERS & LICENSE

PLATE FRAMES

FOOTRESTS

WHEELS & AXLES

HARDWARE, COVERS & GENERAL

ELECTRICAL

LIGHTING

FUEL/AIR SYSTEMS

ENGINE

TRANSMISSION & DRIVELINE

GASKETS & SEALS

AUDIO & VIDEO

SADDLEBAGS & LUGGAGE

SEATS & SISSY BARS

EXHAUST

All part numbers in BLUE are new for 2017.112

PART # DESCRIPTION SUG. RETAILRM‑1 For 1” handlebars $35.950603‑0304 For 11/4” handlebars 35.95

RADAR DETECTOR MOUNT KIT•Slipstreamer’s radar mount kit allows most radar detectors to be mounted to 1” or 11/4” diameter handlebars

•Constructed from black anodized aluminum with a 3/16” clear acrylic mounting plate

•Measures 41/4” L x 31/4” W•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL3502‑0208 E‑pak (magnetic tank pouch for personal electronics) $34.00

TANK BAG E‑PAK•Bring your smartphone, GPS or other electronics on your motorcycle

•Strong magnets keep the weather‑resistant pouch secured to your metal fuel tank (magnets are shielded to reduce interference with all electronic devices)

•Large plastic window transfers electrostatic energy so you can operate the touch screen of your device

•Rubberized material protects bike’s finish•Long perimeter zippers for easy access to device•5” W x 31/2” L x 3/4” tall compartment includes a removable plush pad and foam mat that can be trimmed for a custom fit of your device

PART # DESCRIPTION SUG. RETAIL3550‑0161 1040 Micro Case: exterior – 7.50” x 5.06” x 2.12”, interior – 6.50” x 3.87” x 1.75” $28.953550‑0162 1050 Micro Case: exterior – 7.50” x 5.06” x 3.12”, interior – 6.31” x 3.68” x 2.75” 29.953550‑0163 1060 Micro Case: exterior – 9.37” x 5.56” x 2.62”, interior – 8.25” x 4.25” x 2.25” 36.95

EXPEDITION MICRO CASES•Protect your miniature valuables while on the go•Water‑resistant, crushproof and dustproof•Rubber liner for extra protection doubles as O‑ring seal•Automatic Pressure Equalization Valve balances interior pressure, keeps water out•Stainless steel hardware•Easy‑open latch•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL3550‑0160 Expedition i1015 Micro Case $24.95

EXPEDITION i1015 MICRO CASE•Fits most iPhones®, Droids and BlackBerrys; check dimensions below•External jack allows full use of iPhone®/ iPod Touch® microphone and volume commands

•External headphone jack lets you listen to your player, while case is closed•Built‑in cable manager holds earphones and cables•Active sport carabiner secures case to backpack or belt loop•Easy‑open latch•Customer rubber liner doubles as O‑ring seal•Stainless steel hardware•Water‑resistant, crushproof and dust proof•i1015 Case dimensions: exterior – 6.68” x 3.88” x 1.86”, interior – 5.14” x 2.64” x 1.37”

•Made in the U.S.A.

RM‑1

3550‑01613550‑0162 3550‑0163