2006 Mazda3 Owners Manual - Mazda USA

Black plate (1,1)

Mazda3_8U55-EA-05G_Edition3 Page1Tuesday, September 13 2005 10:40 AM

Form No.8U55-EA-05G

Black plate (2,1)


Form No.8U55-EA-05G

Black plate (3,1)

Thank you for choosing a Mazda. We at Mazda design and build vehicles with completecustomer satisfaction in mind.

To help ensure enjoyable and trouble-free operation of your Mazda, read this manualcarefully and follow its recommendations.

An Authorized Mazda Dealer knows your vehicle best. So when maintenance or service isnecessary, that's the place to go.

Our nationwide network of Mazda professionals is dedicated to providing you with the bestpossible service.

We assure you that all of us at Mazda have an ongoing interest in your motoring pleasureand in your full satisfaction with your Mazda product.

Mazda Motor CorporationHIROSHIMA, JAPAN

Important Notes About This ManualKeep this manual in the glove box as a handy reference for the safe and enjoyable use of your Mazda. Should youresell the vehicle, leave this manual with it for the next owner.

All specifications and descriptions are accurate at the time of printing. Because improvement is a constant goal atMazda, we reserve the right to make changes in specifications at any time without notice and without obligation.

Event Data RecorderThis vehicle is equipped with an event data recorder. In the event of a crash, this device records data related tovehicle dynamics and safety systems for a short period of time. These data can help provide a betterunderstanding of the circumstances in which crashes and injuries occur and lead to the designing of safervehicles.

Air Conditioning and the EnvironmentYour Mazda's genuine air conditioner is filled with HFC134a (R134a), a refrigerant that has been found not todamage the earth's ozone layer. If the air conditioner does not operate properly, consult an Authorized MazdaDealer.

Please be aware that this manual applies to all models, equipment and options. As a result, you may findsome explanations for equipment not installed on your vehicle.

©2005 Mazda Motor CorporationPrinted in Japan Nov. 2005(Print3)

AWord to Mazda Owners


Form No.8U55-EA-05G

Black plate (4,1)

We want to help you get the most drivingpleasure from your vehicle. Your owner'smanual, when read from cover to cover,can do that in many ways.

Illustrations complement the words of themanual to best explain how to enjoy yourMazda. By reading your manual, you canfind out about the features, importantsafety information, and driving undervarious road conditions.

The symbol below in this manual means“Do not do this” or “Do not let thishappen”.

Index: A good place to start is the Index,an alphabetical listing of all informationin your manual.

You'll find several WARNINGs,CAUTIONs, and NOTEs in the manual.

WARNINGAWARNING indicates a situation inwhich serious injury or death couldresult if the warning is ignored.

CAUTIONA CAUTION indicates a situation inwhich bodily injury or damage to yourvehicle, or both, could result if thecaution is ignored.

NOTE

A NOTE provides information andsometimes suggests how to make betteruse of your vehicle.

The symbol below, located on some partsof the vehicle, indicates that this manualcontains information related to the part.Please refer to the manual for a detailedexplanation.

How to Use This Manual


Form No.8U55-EA-05G

Black plate (5,1)


Form No.8U55-EA-05G

Table of Contents

Your Vehicle at a GlanceInterior, exterior views and part identification of your Mazda.

1

Essential Safety EquipmentUse of safety equipment, including seats, seat belt system, child-restraintsystems and SRS air bags.

2

Knowing Your MazdaExplanation of basic operations and controls; opening/closing and adjustmentof various parts.

3

Before Driving Your MazdaImportant information about driving your Mazda.

4

Driving Your MazdaExplanation of instruments and controls.

5

Interior ComfortUse of various features for drive comfort, including air-conditioning and audiosystem.

6

In Case of an EmergencyHelpful information on what to do in an emergency.

7

Maintenance and CareHow to keep your Mazda in top condition.

8

Customer Information and Reporting Safety DefectsImportant consumer information including warranties and add-on equipment.

9

SpecificationsTechnical information about your Mazda.

10

Index 11

Navigation System

Black plate (6,1)


Form No.8U55-EA-05G

Black plate (7,1)

1 Your Vehicle at a Glance

Interior, exterior views and part identification of your Mazda.

Dashboard and Interior Overview .............................................. 1-2

Exterior Overview ......................................................................... 1-4

1-1


Form No.8U55-EA-05G

Black plate (8,1)

The equipment and installation position varies by model.*Refer to Navigation System at the end of the manual.

Power window lock switch ................................................................................ page 3-18Power window switches .................................................................................... page 3-17Power door lock switch ....................................................................................... page 3-8

1-2

Your Vehicle at a Glance

Dashboard and Interior Overview


Form No.8U55-EA-05G

Black plate (9,1)

Headlight leveling switch .................................................................................. page 5-48Dashboard illumination ..................................................................................... page 5-32Lighting control/Turn signals ............................................................................ page 5-46Fog light switch ................................................................................................. page 5-49Instrument cluster .............................................................................................. page 5-28Air bags ............................................................................................................. page 2-38Cruise control switches ...................................................................................... page 5-18Wiper and washer lever ..................................................................................... page 5-50Hazard warning flasher switch .......................................................................... page 5-55Information display ............................................................................................ page 6-45Audio system ..................................................................................................... page 6-16Glove box .......................................................................................................... page 6-52Center console ................................................................................................... page 6-53Parking brake ....................................................................................................... page 5-5Cup holder ......................................................................................................... page 6-51MT shift lever ...................................................................................................... page 5-9AT shift lever (Sport AT) ................................................................................... page 5-11Lighter ............................................................................................................... page 6-50Ashtray ............................................................................................................... page 6-50Climate control system ........................................................................................ page 6-2Ignition switch ..................................................................................................... page 5-2Steering column release lever ............................................................................ page 3-28Audio control switch ......................................................................................... page 6-38Remote fuel-filler lid release ............................................................................. page 3-19Hood release handle .......................................................................................... page 3-20Outside mirror switch ........................................................................................ page 3-28Interior light ....................................................................................................... page 6-42Sunvisor ............................................................................................................. page 6-42Map light ........................................................................................................... page 6-43Rearview mirror ................................................................................................. page 3-30Vanity mirror ...................................................................................................... page 6-42Front seats ............................................................................................................ page 2-2Seat belt ............................................................................................................... page 2-9Rear seat .............................................................................................................. page 2-5


Dashboard and Interior Overview

1-3


Form No.8U55-EA-05G

Black plate (10,1)

The equipment and installation position varies by model.

4 Door

1-4


Exterior Overview


Form No.8U55-EA-05G

Black plate (11,1)

Trunk lid ............................................................................................................ page 3-12Antenna ............................................................................................................. page 6-16Rear window defroster ....................................................................................... page 5-54Power windows ................................................................................................. page 3-16Tires ................................................................................................................... page 8-37Fuel-filler lid ...................................................................................................... page 3-18Light bulbs ......................................................................................................... page 8-42Hood .................................................................................................................. page 3-20Windshield wiper blades .................................................................................... page 8-30Moonroof ........................................................................................................... page 3-22Child safety locks ................................................................................................ page 3-9Doors and keys .................................................................................................... page 3-7Outside mirror .................................................................................................... page 3-28


Exterior Overview

1-5


Form No.8U55-EA-05G

Black plate (12,1)

The equipment and installation position varies by model.

5 Door

1-6


Exterior Overview


Form No.8U55-EA-05G

Black plate (13,1)

Liftgate ................................................................................................................ page 3-9Rear window defroster ....................................................................................... page 5-54Windshield wiper blades .................................................................................... page 8-30Antenna ............................................................................................................. page 6-16Fuel-filler lid ...................................................................................................... page 3-18Power windows ................................................................................................. page 3-16Tires ................................................................................................................... page 8-37Light bulbs ......................................................................................................... page 8-42Hood .................................................................................................................. page 3-20Moonroof ........................................................................................................... page 3-22Child safety locks ................................................................................................ page 3-9Doors and keys .................................................................................................... page 3-7Outside mirror .................................................................................................... page 3-28


Exterior Overview

1-7


Form No.8U55-EA-05G

Black plate (14,1)

1-8


Form No.8U55-EA-05G

Black plate (15,1)

2 Essential Safety Equipment

Use of safety equipment, including seats, seat belt system, child-restraintsystems and SRS air bags.

Seats ............................................................................................... 2-2Front Seats ................................................................................ 2-2Rear Seat ................................................................................... 2-5

Seat Belt Systems .......................................................................... 2-9Seat Belt Precautions ................................................................ 2-9Seat Belt (Except Center-Rear Position) ................................. 2-12Front Seat Belt Pretensioner and Load Limiting Systems ....... 2-14Center-Rear Position Seat Belt (3-Point Type) ....................... 2-16Seat Belt Extender ................................................................... 2-18Seat Belt Warning Light/Beep ................................................ 2-19

Child Restraint ............................................................................ 2-21Child Restraint Precautions ..................................................... 2-21Installing Child-Restraint Systems .......................................... 2-25LATCH Child-Restraint Systems ............................................ 2-33

SRS Air Bags ............................................................................... 2-38Supplemental Restraint Systems (SRS) Precautions ............... 2-38Supplemental Restraint System Components ......................... 2-42How the Air Bags Work .......................................................... 2-45

2-1


Form No.8U55-EA-05G

Black plate (16,1)

Front Seats

WARNINGModification of the Front Seats:Modifying or replacing the front seatssuch as replacing the upholstery orloosening any bolts is dangerous. Thefront seats contain air bagcomponents essential to thesupplemental restraint system. Suchmodifications could damage thesupplemental restraint system andresult in serious injury. Consult anAuthorized Mazda Dealer if there isany need to remove or reinstall thefront seats.

Damaged Front Seats:Driving with damaged front seats isdangerous. A collision, even one notstrong enough to inflate the air bags,could damage the front seats whichcontain essential air bag components.If there was a subsequent collision, theair bag may not deploy which couldlead to injuries. Always have anAuthorized Mazda Dealer inspect thefront seats, front seat beltpretensioners and air bags after acollision.

Securing the Seats:Adjustable seats and seatbacks thatare not securely locked are dangerous.In a sudden stop or collision, the seator seatback could move, causinginjury. Make sure the adjustablecomponents of the seat are locked inplace by attempting to slide the seatforward and backward and rockingthe seatback.

qSeat Slide

WARNINGDriver's Seat Adjustment:Adjusting the driver's seat while thevehicle is moving is dangerous. Thedriver could lose control of the vehicleand have an accident. Adjust thedriver's seat only when the vehicle isstopped.

To move a seat forward or backward, raisethe lever and slide the seat to the desiredposition and release the lever.

Make sure the lever returns to its originalposition and the seat is locked in place byattempting to push it forward andbackward.

2-2

Essential Safety Equipment

Seats


Form No.8U55-EA-05G

Black plate (17,1)

qSeat Recline

WARNINGReclining:Sitting in a reclined position while thevehicle is moving is dangerousbecause you don't get the fullprotection from seat belts. Duringsudden braking or a collision, you canslide under the lap belt and sufferserious internal injuries. Formaximum protection, sit well back andupright.

Reclining the Front Passenger SeatCan Turn Off the Front Passenger AirBags:If your vehicle is equipped with frontpassenger seat weight sensors, sittingin the front passenger seat improperlyout of position or with the seatbackreclined too far while the vehicle ismoving is dangerous as it can take offweight from the seat bottom and affectthe decision of the front passengersensing system. The front passengerwill not have the supplementaryprotection of the air bags andpretensioner, which could result inserious injury. Always sit uprightagainst your seatback, with your feeton the floor.

WARNINGUnlocked Seatback:The seatback plays an important rolein your protection in a vehicle.Leaving the seatback unlocked isdangerous as it can allow passengersto be ejected or thrown around andbaggage to strike occupants in asudden stop or collision, resulting insevere injury. After adjusting theseatback at any time, even when thereare no other passengers, rock theseatback to make sure it is locked inplace.

To change the seatback angle, leanforward slightly while raising the lever.Then lean back to the desired position andrelease the lever.

Make sure the lever returns to its originalposition and the seatback is locked inplace by attempting to push it forward andbackward.


Seats

2-3


Form No.8U55-EA-05G

Black plate (18,1)

CAUTIONWhen returning a rear-reclined seatbackto its upright position, make sure youhold onto the seatback with your otherhand while operating the lever. If theseatback is not supported, it will flipforward suddenly and could causeinjury.

qHeight Adjustment (Driver's Seat)í

By moving the seat lever up or down, theseat bottom height can be adjusted.

Down

Up

qLumbar Support Adjustment(Driver's Seat)í

To adjust the lumbar support, pull thelever forward.

qHead Restraint

WARNINGHead Restraints Adjustment:Driving with the head restraintsadjusted too low or removed isdangerous. With no support behindyour head, your neck could beseriously injured in a collision. Alwaysdrive with the head restraints insertedwhen seats are being used and makesure they are properly adjusted.

Height adjustment

To raise a head restraint, pull it up to thedesired position.To lower the head restraint, press the stop-catch release, then push the head restraintdown.

Adjust the head restraint so that the top iseven with the top of the passenger's ears,never the passenger's neck.

2-4


íSome models.

Seats


Form No.8U55-EA-05G

Black plate (19,1)

qSeat Warmerí

The front seats are electrically heated. Theignition switch must be in the ONposition.

Press the switch to turn the seat warmeron or off. When the switch is in the ONposition, the indicator light will come on.

NOTE

The seat temperature is regulatedautomatically by a thermostat. Otherthan turning it on or off, it cannot beadjusted.

Rear Seat

WARNINGStacking Cargo:Stacking luggage or other cargohigher than the seatbacks, and placingarticles on the rear package tray or onthe luggage compartment cover isdangerous. During sudden braking ora collision, objects can fly around andbecome projectiles that may hit andinjure passengers. Don't stack cargohigher than the seatbacks or on theluggage compartment cover.

Not Securing Luggage and Cargo:Not securing cargo while driving isdangerous as it could move or becrushed during sudden braking or acollision and cause injury. Make sureluggage and cargo is secured beforedriving.

Securing Seats:Adjustable seats that are not securelylocked are dangerous. In a suddenstop or collision, the seat or seatbackcould move, causing injury. Make surethe adjustable components of the seatare locked in place.


Seats

2-5íSome models.


Form No.8U55-EA-05G

Black plate (20,1)

WARNINGUnlocked Seatback:The seatback plays an important rolein your protection in a vehicle.Leaving the seatback unlocked isdangerous as it can allow passengersto be ejected or thrown around andbaggage to strike occupants in asudden stop or collision, resulting insevere injury. After returning theseatback at any time, even when thereare no other passengers, rock theseatback to make sure it is locked inplace.

Passenger on the Folded Seatback:Driving with a passenger on the foldedseatback is dangerous. Allowing achild to sit up on the folded seatbackwhile the vehicle is moving isparticularly dangerous. In a suddenstop or even a minor collision, a childnot in a proper seat or child-restraintsystem and seat belt could be thrownforward, back or even out of thevehicle resulting in serious injuries ordeath. The child in the baggage areacould be thrown into other occupantsand cause serious injury. Never allowa passenger to sit or stand on thefolded seatback while the vehicle ismoving.

Children and the Folding Rear Seats:Playing with the folding rear seats isdangerous. Do not give the car keys tochildren and do not allow them to playin the vehicle.

NOTE

When returning a rear seat to itsoriginal position, also replace the seatbelt to its normal position. Verify thatthe seat belt pulls out and retracts.

qSplit-Folding Rear Seatback

To fold the seatbacks

CAUTIONWhen operating the rear seatback knob,make sure you support the seatbackwith your hand. If the seatback is notsupported with your hand, it will flipforward suddenly and could causeinjury to the finger that pushes the rearseatback knob down.

1. Unfasten the lap portion of the center-rear seat belt (page 2-16).

CAUTIONAlways unfasten the lap portion of thebelt before folding the rear-leftseatback. Leaving the lap portion of thebelt fastened could cause damage to theseat belt, buckle and seatback.

2. Position the outboard seat belts to theside when folding the seatbacks down.

3. Support the seatback with your hand.

2-6


Seats


Form No.8U55-EA-05G

Black plate (21,1)

4. Push the rear seatback knob down.

To return the seatbacks to the uprightposition

1. Position the outboard seat belts to theside.

2. Lift the seatbacks upright.

3. Make sure the seat belts are fullypulled out from under the seatbacks.

4. Pull on the top of the seatbacks frominside the vehicle to make sure they arelocked.

5. Fasten the center-rear lap/shoulder beltand check that all seat belts are routedproperly for passenger use (page 2-16).

WARNINGSeat Belts Caught Under Seatbacks:A seat belt caught under a seatbackafter the seatback is returned to itsupright position is dangerous. In acollision or sudden stop, the seat beltcannot provide adequate protection.Always make sure the seat belts arefully pulled out from under theseatbacks.

Returning Rear Seatbacks to theUpright Position:A rear seatback not fully returned andlocked in the upright position isdangerous. Sudden stops ormaneuvering could cause a seatbackto flip forward suddenly resulting ininjury. If the red indicator is visible onthe back of the rear seatback knob, theseatback is not locked in the uprightposition. When returning the seatbackto the upright position, make surethere is no red indication.

Locked position

Unlocked position

Red indicator


Seats

2-7


Form No.8U55-EA-05G

Black plate (22,1)

qRear Seatback Lock (4 Door)

To lock or unlock a seatback, move thelever.

NOTE

The seatback locks are part of the trunksecurity system (page 3-14).

qHead Restraint

WARNINGHead Restraints Adjustment:Driving with the head restraintsadjusted too low or removed isdangerous. With no support behindyour head, your neck could beseriously injured in a collision. Alwaysdrive with the head restraints insertedwhen seats are being used and makesure they are properly adjusted.

Height adjustment

To raise a head restraint, pull it up to thedesired position.To lower the head restraint, press the stop-catch release, then push the head restraintdown.

Adjust the head restraint so that the top iseven with the top of the passenger's ears,never the passenger's neck.

Removal

To remove the head restraint, press thestop-catch release, then pull up on thehead restraint.

2-8


Seats


Form No.8U55-EA-05G

Black plate (23,1)

Seat Belt PrecautionsSeat belts help to decrease the possibility of severe injury during accidents and suddenstops. Mazda recommends that the driver and all passengers always wear seat belts.

All of the seat belt retractors are designed to keep the lap/shoulder belts out of the waywhen not in use.

The driver's seat belt has no provisions for child-restraint systems and has only anemergency locking mode. The driver may wear it comfortably, and it will lock during acollision.

However, the front passenger's seat lap/shoulder belt retractors operate in two modes:emergency locking mode, and for child-restraint systems, automatic locking mode. Whilewe recommend you put all children in the rear seats, if you must use the front passengerseat for a child, slide the front passenger seat as far back as possible and make sure anychild-restraint system is secured properly.

WARNINGNot Wearing Seat Belts:Not wearing a seat belt is extremely dangerous. During a collision, occupants notwearing seat belts could hit someone or things inside the vehicle or even be thrown outof the vehicle. They could be seriously injured or even killed. In the same collision,occupants wearing seat belts would be much safer. Always wear your seat belt andmake sure all occupants are properly restrained.

Seat Belt Damaged During an Accident:Using a damaged seat belt is dangerous. An accident could damage the belt webbingof the seat belt in use. A damaged seat belt cannot provide adequate protection in acollision. Front air bags and pretensioners work together, but whether a front seat wasoccupied or not, if any air bag deployed and whether a seat belt pretensioner deployedor not, all front seat belts and air bags must be inspected and replaced if necessary.Have an Authorized Mazda Dealer inspect all seat belt systems in use during anaccident before they are used again.

Twisted Seat Belts:Twisted seat belts are dangerous. In a collision, the full width of the belt isn't availableto absorb the impact. This puts more force on the bones beneath the belt, which couldcause serious injury or death. Don't wear twisted seat belts.


Seat Belt Systems

2-9


Form No.8U55-EA-05G

Black plate (24,1)

WARNINGOne Belt, One Passenger:Using one seat belt for more than one person at a time is dangerous. A seat belt usedin this way can't spread the impact forces properly and the two passengers could becrushed together and seriously injured or even killed. Never use one belt for morethan one person at a time and always operate the vehicle with each occupant properlyrestrained.

CAUTIONBelt retraction may become difficult if the belts and rings are soiled, so try to keep themclean.

qPregnant Women and Persons with Serious Medical Conditions

Pregnant women should wear seat belts. Ask your doctor for specific recommendations.The lap belt should be worn SNUGLYAND AS LOWAS POSSIBLE OVER THE HIPS.The shoulder belt should be worn across your shoulder properly, but never across thestomach area.Persons with serious medical conditions also should wear seat belts. Check with yourdoctor for any special instructions regarding specific medical conditions.

2-10


Seat Belt Systems


Form No.8U55-EA-05G

Black plate (25,1)

qEmergency Locking Mode

In the emergency locking mode, the belt remains comfortable on the occupant and theretractor will lock in position during a collision. When the seat belt is retracted, it willalways be in the emergency locking mode until it is switched to automatic locking mode bypulling it all the way out to its full length. If the belt feels tight and hinders comfortablemovement while the vehicle is stopped or in motion, it may be in the automatic lockingmode because the belt has been pulled too far out. To return to the belt more comfortableemergency locking mode, wait until the vehicle has stopped in a safe, level area, retract thebelt fully to convert it back to emergency locking mode and then extend it around youagain.

qAutomatic Locking Mode

Always use the automatic locking mode to keep the child-restraint system from shifting toan unsafe position in the event of an accident. To enable seat belt automatic locking mode,pull it all the way out and connect it as instructed on the child-restraint system. It willretract down to the child-restraint system and stay locked on it. See the section on childrestraint (page 2-21).


Seat Belt Systems

2-11


Form No.8U55-EA-05G

Black plate (26,1)

Seat Belt (Except Center-Rear Position)

NOTE

When using the center-rear seat belt,refer to “Center-Rear Position SeatBelt” (page 2-16).

qFastening the Seat Belts

1. Grasp the tongue.

2. Slowly pull out the lap/shoulder belt.

Tongue

Belt

3. Insert the tongue into the buckle untilyou hear a click.

Buckle

Tongue

WARNINGPositioning the Shoulder Portion ofthe Seat Belt:Improper positioning of the shoulderportion of the seat belt is dangerous.Always make sure the shoulderportion of the seat belt is positionedacross your shoulder and near yourneck, but never under your arm, onyour neck, or on your upper arm.

4. Make sure the shoulder belt is snuglyfitted against your body.

Keep low on hip bone

Too high

Take up slack

WARNINGPositioning the Lap Portion of theSeat Belt:The lap portion of the seat belt worntoo high is dangerous. In a collision,this would concentrate the impactforce directly on the abdominal area,causing serious injury. Wear the lapportion of the belt snugly and as lowas possible.

2-12


Seat Belt Systems


Form No.8U55-EA-05G

Black plate (27,1)

qUnfastening the Seat Belts

Depress the button on the buckle.

Button

NOTE

If a belt does not fully retract, inspect itfor kinks and twists. If it is still notretracting properly, have it inspected atan Authorized Mazda Dealer.

qShoulder Belt Adjuster

Adjust the height of the shoulder belt ifthe seat belt touches your neck, or if itcrosses your arm instead of your shoulder.To raise the shoulder belt adjuster, pushthe adjuster up. To lower the shoulder beltadjuster, pull the adjuster and slide itdown. Make sure the adjuster is locked.

WARNINGPositioning the Shoulder Portion ofthe Seat Belt:Improper positioning of the shoulderportion of the seat belt is dangerous.Always make sure the shoulderportion of the seat belt is positionedacross your shoulder and near yourneck, but never under your arm, onyour neck, or on your upper arm.


Seat Belt Systems

2-13


Form No.8U55-EA-05G

Black plate (28,1)

Front Seat Belt Pretensionerand Load Limiting Systems

For optimum protection, the driver andfront passenger seat belts are equippedwith pretensioner and load limitingsystems.In moderate or greater frontal or near-frontal accidents, the front air bag andpretensioner systems deploysimultaneously. The pretensioners take upslack in the front seat belts as the air bagsare expanding. The seat belt pretensionersystem cannot provide adequateprotection in an accident if the seat belt isnot fastened properly. The load limitingsystem releases belt webbing in acontrolled manner to reduce belt force onthe occupant's chest.

WARNINGIncorrect Positioning of the Driverand Front Passenger Seat Belts:Incorrect positioning of the driver andpassenger seat belts is dangerous.Without proper positioning, thepretensioner and load limiting systemscannot provide adequate protection inan accident and this could result inserious injury. Wear seat belts only asrecommended in this owner's manual(page 2-12).

WARNINGExpended Seat Belt Pretensioners:One or both front air bags may deploy,and the corresponding pretensioner(s)will also deploy at the same time. Useof front seat belts with thepretensioner system expended isdangerous. Like the air bags, the seatbelt pretensioners will only functiononce. After they are expended, theywill not function again and must bereplaced immediately. If the seat beltpretensioners are not replaced, therisk of injury in a collision willincrease. Always have an AuthorizedMazda Dealer inspect the seat beltpretensioners and air bags after anycollision. Expended seat beltpretensioners and air bags must bereplaced after any collision whichcaused them to deploy. Additionally,the load limiter will only limit loads onthe chest once in a collision and isanother reason to have the front seatbelts inspected.

Modification or Testing of thePretensioner System:Modifying the components or wiringof the pretensioner system, includingthe use of electronic testing devices isdangerous. You could accidentallyactivate it or make it inoperable whichwould prevent it from activating in anaccident. The occupants or repairerscould be seriously injured. Nevermodify the components or wiring, oruse electronic testing devices on thepretensioner system.

2-14


Seat Belt Systems


Form No.8U55-EA-05G

Black plate (29,1)

WARNINGPretensioner System Disposal:Improper disposal of the pretensionersystem or a vehicle with non-deactivated pretensioners isdangerous. Unless all safetyprocedures are followed, injury couldresult. Ask an Authorized MazdaDealer how to safely dispose of thepretensioner system or how to scrap apretensioner-equipped vehicle.

NOTE

l The pretensioner system will onlyactivate in a moderate or greaterfrontal or near-frontal collision. Itwill not activate in most rollovers,side or rear impacts.

l Some smoke (non-toxic gas) will bereleased when the air bags andpretensioners deploy. This does notindicate a fire. This gas normally hasno effect on occupants, however,those with sensitive skin mayexperience light skin irritation. Ifresidue from the deployment of theair bags or the front pretensionersystem gets on the skin or in theeyes, wash it off as soon as possible.

qAir Bag/Front Seat BeltPretensioner System Warning Light

If the air bag/front seat belt pretensionersystem is normal, the warning lightilluminates when the ignition switch isturned to the ON position or after theengine is cranked. After about 6 secondsit goes out.

A system malfunction is indicated whenthe warning light constantly illuminates ordoesn't illuminate at all when the ignitionswitch is turned to the ON position. If anyof these occur, consult an AuthorizedMazda Dealer as soon as possible. Thesystem may not work in an accident.

WARNINGSelf-Servicing the Air Bag/Pretensioner Systems:Self-servicing or tampering with thesystems is dangerous. An air bag/pretensioner could accidentallyactivate or become disabled. Thiscould cause serious injuries. Nevertamper with the systems and alwayshave an Authorized Mazda Dealerperform all servicing and repairs.


Seat Belt Systems

2-15


Form No.8U55-EA-05G

Black plate (30,1)

qAir Bag/Front Seat BeltPretensioner System Warning Beep

If a malfunction is detected in the air bag/front seat belt pretensioner systems andthe warning light, a warning beep soundwill be heard for about 5 seconds everyminute.

The air bag and seat belt pretensionersystem warning beep sound will continueto be heard for approximately 35 minutes.Have your vehicle inspected at anAuthorized Mazda Dealer as soon aspossible.

WARNINGAir Bag/Front Seat Belt PretensionerSystem Warning Beep:Driving the vehicle with the air bag/front seat belt pretensioner systemwarning beep sounding is dangerous.In a collision, the air bags and thefront seat belt pretensioner system willnot deploy and this could result indeath or serious injury.Do not drive the vehicle with the airbag/front seat belt pretensioner systemwarning beep sounding. Contact anAuthorized Mazda Dealer to have thevehicle inspected as soon as possible.

Center-Rear Position SeatBelt (3-Point Type)

Before using the center-rear lap/shoulderbelt make sure tongue (A) and anchorbuckle (B) are fastened.

(A)

(B)

qFastening the Seat Belt

1. Grasp the tongue (C).

2. Slowly pull out the lap/shoulder belt.

3. Insert the tongue (C) into the buckle(D) until you hear a click.

(A)

(B)

(C)

(D)

2-16


Seat Belt Systems


Form No.8U55-EA-05G

Black plate (31,1)

WARNINGFastening the Center-Rear Seat Beltwith Only One Buckle:Fastening the center-rear seat beltwith only one buckle is dangerous. Ifonly one pair of seat belt tongue andbuckle, either tongue (A) and anchorbuckle (B) or tongue (C) and anchorbuckle (D), is fastened, the seat beltcannot provide full protection. In asudden stop or collision, the usercould slide under the belt and sufferserious injuries. Always make surethat both pairs of seat belt tongues andbuckles are fastened properly.

Positioning the Shoulder Portion ofthe Seat Belt:Improper positioning of the shoulderportion of the seat belt is dangerous.Always make sure the shoulderportion of the seat belt is positionedacross your shoulder and near yourneck, but never under your arm, onyour neck, or on your upper arm.

4. Make sure the shoulder belt is snuglyfitted against your body.

WARNINGPositioning the Lap Portion of theSeat Belt:The lap portion of the seat belt worntoo high is dangerous. In a collision,this would concentrate the impactforce directly on the abdominal area,causing serious injury. Wear the lapportion of the belt snugly and as lowas possible.

qUnfastening the Seat Belt

Depress the button on the buckle.

Button

qUnfastening the Lap Portion ofthe Seat Belt

Insert a small object such as a key in theanchor buckle (B) slot.

(A)

(B)

CAUTIONAlways unfasten the lap portion of thebelt before folding the left-rearseatback. Leaving the lap portion of thebelt fastened could cause damage to theseat belt, buckle and seatback.


Seat Belt Systems

2-17


Form No.8U55-EA-05G

Black plate (32,1)

NOTE

To encourage rear seat passengers towear their seat belts, we suggest leavingthe center-rear lap position of the beltfastened at all times except whenfolding the rear seat forward.

qFastening the Lap Portion of theSeat Belt

Grasp tongue (A) and insert it into theanchor buckle (B) until you hear a click. Itis now secure for passenger use.

NOTE

After returning the left-rear seatback toits upright position, fasten the lapportion of the belt.

Seat Belt ExtenderIf your seat belt is not long enough, evenwhen fully extended, a seat belt extendermay be available to you at no charge fromyour Authorized Mazda Dealer.This extender will be only for you and forthe particular vehicle and seat. Even if itplugs into other seat belts, it may not holdin the critical moment of a crash.When ordering an extender, only orderone that provides the necessary additionallength to fasten the seat belt properly.Please contact your Authorized MazdaDealer for more information.

WARNINGUnnecessary Use of an Extender:Using a seat belt extender when notnecessary is dangerous. The seat beltwill be too long and not fit properly. Inan accident, the seat belt will notprovide adequate protection and youcould be seriously injured. Only usethe extender when it is required tofasten the seat belt properly.

Using an Improper Extender:Using a seat belt extender that is foranother person or a different vehicleor seat is dangerous. The seat belt willnot provide adequate protection andthe user could be seriously injured inan accident. Only use the extenderprovided for you and for the particularvehicle and seat. NEVER use theextender in a different vehicle or seat.

2-18


Seat Belt Systems


Form No.8U55-EA-05G

Black plate (33,1)

WARNINGUsing an Extender That is Too Long:Using an extender that is too long isdangerous. The seat belt will not fitproperly. In an accident, the seat beltwill not provide adequate protectionand you could be seriously injured.Don't use the extender or choose oneshorter in length if the distancebetween the extender's buckle and thecenter of the user's body is less than15cm (6 in).

NOTE

When not in use, remove the seat beltextender and store it in the vehicle. Ifthe seat belt extender is left connected,the seat belt extender might getdamaged as it will not retract with therest of the seat belt and can easily fallout of the door when not in use and bedamaged the seat belt warning light willnot illuminate and function properly.

Seat Belt Warning Light/Beep

The seat belt warning light illuminatesand a beep sound will be heard if thedriver's seat belt is not fastened when theignition switch is turned to the ONposition.

Conditions of operation

Condition Result

The driver's seat belt is notfastened when the ignitionswitch is turned to the ONposition.

The warning lightilluminates for about 1minute and a beepsound will be heardfor about 6 seconds.

The driver's seat belt isfastened while the warninglight and the beep sound areactivated.

The warning lightturns off and the beepsound stops.

The driver's seat belt isfastened before the ignitionswitch is turned to the ONposition.

The warning light willnot illuminate and thebeep sound will not beheard.


Seat Belt Systems

2-19


Form No.8U55-EA-05G

Black plate (34,1)

qBelt Minder

The belt minder is a supplementalwarning to the seat belt warning function.This feature provides additional remindersto the driver that the driver's seat belt isnot fastened by intermittently sounding abeep sound and flashing the seat beltwarning light in the instrument cluster.

Condition Result

The driver's seat belt is notfastened when the vehiclespeed reaches 8 km/h(5 mph) and about 1 minutehas elapsed since theignition switch was turnedto the ON position.

The warning lightflashes and the beepsound will be heardfor about 6 secondsevery 30 seconds, fora period of about 5minutes.





NOTE

The belt minder can be deactivated bythe following methods.

l (Temporary deactivation)To temporarily deactivate the beltminder, turn the ignition switch tothe ON position, fasten the driver'sseat belt for about 2 seconds orlonger, and then unfasten it within 20seconds. The belt minder will bedeactivated until the ignition switchis turned to the ON position again.

l (Long-term deactivation)To deactivate the belt minder overthe long term, consult an AuthorizedMazda Dealer. If the belt minder islong-term deactivated, the beltminder will not activate until it isrestored at the Authorized MazdaDealer.

2-20


Seat Belt Systems


Form No.8U55-EA-05G

Black plate (35,1)

Child Restraint PrecautionsMazda strongly urges the use of child-restraint systems for children small enough to usethem.

You are required by law to use a child-restraint system for children in the U.S. and Canada.Check your local and state or provincial laws for specific requirements regarding the safetyof children riding in your vehicle.

Whatever child-restraint system you consider, please pick the appropriate one for the ageand size of the child, obey the law and follow the instructions that come with the individualchild-restraint system.

A child who has outgrown child-restraint systems should sit in the rear and use seat belts,both lap and shoulder. If the shoulder belt crosses the neck or face, move the child closer tothe center of the vehicle in the outboard seats, and towards the buckle on the right if thechild is seated on the center seat.

Statistics confirm that the rear seat is the best place for all children up to 12 years of age,and more so with a supplemental restraint system (air bags).

A rear-facing child-restraint system should NEVER be used on the front seat with the airbag system activated. The front passenger's seat is also the least preferred seat for otherchild-restraint systems.

To reduce the chance of injuries caused by deployment of the front passenger air bag, thefront passenger seat weight sensors work as a part of the supplemental restraint system.This system deactivates the front passenger front and side air bags and also the frontpassenger seat belt pretensioner system when the total seated weight on the front passengerseat is less than approximately 30 kg (66 lb).

When an infant or small child sits on the front passenger seat, the system shuts off the frontpassenger front and side air bags and seat belt pretensioner system, so make sure the frontpassenger air bag deactivation indicator light illuminates.

Even if the front passenger air bag is shut off, Mazda strongly recommends that children beproperly restrained and child-restraint systems of all kinds are properly secured on the rearseats which are the best place for children.

For more details, refer to “Front passenger seat weight sensors” (page 2-45).


Child Restraint

2-21


Form No.8U55-EA-05G

Black plate (36,1)

WARNINGProper Size of Child-Restraint System:For effective protection in vehicle accidents and sudden stops, a child must beproperly restrained using a seat belt or child-restraint system depending on age andsize. If not, the child could be seriously injured or even killed in an accident.

Follow the Manufacturer's Instructions and Always Keep the Child-Restraint SystemBuckled Down:An unsecured child-restraint system is dangerous. In a sudden stop or a collision itcould move causing serious injury or death to the child or other occupants. Make sureany child-restraint system is properly secured in place according to the child-restraintsystem manufacturer's instructions. When not in use, remove it from the vehicle orfasten it with a seat belt, or latch it down to BOTH LATCH lower anchors for LATCHchild-restraint systems and the corresponding tether anchor.

Holding a Child While the Vehicle is Moving:Holding a child in your arms while the vehicle is moving is extremely dangerous. Nomatter how strong the person may be, he or she cannot hold onto a child in a suddenstop or collision and it could result in serious injury or death to the child or otheroccupants. Even in a moderate accident, the child may be exposed to air bag forcesthat could result in serious injury or death to the child, or the child may be slammedinto the adult, injuring the adult. Always secure a child in a proper child-restraintsystem.

Rear-Facing Child-Restraint System:Rear-facing child-restraint systems on the front seat are particularly dangerous.The child-restraint system can be hit by a deploying air bag and moved violentlybackward resulting in serious injury or death to the child. Even though you may feelassured that a front passenger air bag will not deploy based on the fact that the frontpassenger air bag deactivation indicator light illuminates, NEVER use a rear-facingchild-restraint system in the front seat with an air bag that could deploy even in amoderate collision.

2-22


Child Restraint


Form No.8U55-EA-05G

Black plate (37,1)

WARNINGSeating Children in a Child-Restraint System on the Front Passenger Seat:If your vehicle is equipped with front passenger seat weight sensors, the vehicle is alsoequipped with an air bag deactivation indicator light (page 2-30). Even with the frontpassenger seat weight sensors, if you must use the front passenger seat for children,seating a child in a child-restraint system on the front passenger seat under thefollowing conditions increases the danger of the front passenger air bag deployingand could result in serious injury or death to the child.l The total seated weight of the child with the child-restraint system on the frontpassenger seat is approximately 30 kg (66 lb) or more with a child in the child-restraint system.

l Luggage or other items are placed on the seat with the child in the child-restraintsystem.

l A rear passenger or luggage push or pull down on the front passenger seatback.l A rear passenger puts their feet on the front seat rails.l Luggage or other items are placed on the seatback or hung on the head restraint.l The seat is washed.l Liquids are spilled on the seat.l The front passenger seat is moved backward, pushing into luggage or other itemsplaced behind it.

l The front passenger seatback contacts the rear seat.l Luggage or other items are placed between the front passenger seat and driver seat.l Any accessories which might increase the total seated weight on the front passengerseat are attached to the front passenger seat.

The designated positions with seat belts on the rear seats are the safest places forchildren. Always use seat belts and child restraints.

Children and Seating Position with Side and Curtain Air Bags:Allowing anyone to lean over or against the side window, the area of the frontpassenger seat, front and rear window pillars and the roof edge along both sides fromwhich the side and curtain air bags deploy, even if a child-restraint system is used, isdangerous. If the vehicle is equipped with side and curtain air bags, the impact ofinflation could cause serious injury or death to the child. Furthermore, leaning overor against the front door could block the side and curtain air bags and eliminate theadvantages of supplemental protection. With the front air bag and the additional sideair bag that comes out of the front seat, the rear seat is always a better location forchildren. Do not allow a child to lean over or against the side window, even if the childis seated in a child-restraint system.


Child Restraint

2-23


Form No.8U55-EA-05G

Black plate (38,1)

WARNINGOne Belt, One Passenger:Using one seat belt for more than one person at a time is dangerous. A seat belt usedin this way can't spread the impact forces properly and the two passengers could becrushed together and seriously injured or even killed. Never use one belt for morethan one person at a time and always operate the vehicle with each occupant properlyrestrained.

CAUTIONA seat belt or child-restraint system can become very hot in a closed vehicle duringwarm weather. To avoid burning yourself or a child, check them before you or your childtouches them.

NOTE

Your Mazda is equipped with LATCH lower anchors for attachment of speciallydesigned LATCH child-restraint systems in the rear seat. When using these anchors tosecure a child-restraint system, refer to “LATCH Child-Restraint Systems” (page 2-33).

2-24


Child Restraint


Form No.8U55-EA-05G

Black plate (39,1)

Installing Child-RestraintSystems

Accident statistics reveal that a child issafer in the rear seat. The front passenger'sseat is clearly the worst choice for anychild under 12, and with rear-facing child-restraint systems it is clearly unsafe due toair bags.

Some child-restraint systems now comewith tethers and therefore must beinstalled on the seats that take tethers tobe effective. In your Mazda, tetheredchild-restraint systems can only beaccommodated in the three positions onthe rear seat.

Even if your vehicle is equipped with thefront passenger air bag cut-off system(page 2-45), which automaticallydeactivates the front passenger air bag, arear seat is the safest place for a child ofany age or size.

Some child-restraint systems also employspecially designed LATCH attachments;refer to “LATCH Child-RestraintSystems” (page 2-33).

WARNINGTethered Child-Restraint SystemsWork Only on Tether-Equipped RearSeats:Installation of a tether equipped child-restraint system in the frontpassenger's seat defeats the safetydesign of the system and will result inan increased chance of serious injuryif the child-restraint system goesforward without benefit of beingtethered.Place tether equipped child-restraintsystems where there are tetheranchors.

qRear Seat Child-Restraint SystemInstallation

Follow these instructions when using achild-restraint system, unless you areattaching a LATCH-equipped child-restraint system to the rear LATCH loweranchors. Refer to “LATCH Child-Restraint Systems” (page 2-33).

NOTE

Follow the child-restraint systemmanufacturer's instructions carefully. Ifyou are not sure whether you have aLATCH system or tether, check in thechild-restraint system manufacturer'sinstructions and follow themaccordingly. Depending on the type ofchild-restraint system, it may notemploy seat belts which are inautomatic locking mode.


Child Restraint

2-25


Form No.8U55-EA-05G

Black plate (40,1)

1. Make sure the seatback is securelylatched by pushing it back until it isfully locked.

2. Secure the child-restraint system withthe lap portion of the lap/shoulder belt.See the manufacturer's instructions onthe child-restraint system for beltrouting instructions.

3. To get the retractor into the automaticlocking mode, pull the shoulder beltportion of the seat belt until the entirelength of the belt is out of the retractor.

4. Push the child-restraint system firmlyinto the vehicle seat. Be sure the beltretracts as snugly as possible. Clickingfrom the retractor will be heard duringretraction if the system is in theautomatic locking mode. If the beltdoes not lock the seat down tight,repeat this step.

NOTE

Inspect this function before each use ofthe child-restraint system. You shouldnot be able to pull the shoulder belt outof the retractor while the system is inthe automatic locking mode. When youremove the child-restraint system, besure the belt fully retracts to return thesystem to emergency locking modebefore occupants use the seat belts.

5. If your child-restraint system requiresthe use of a tether strap, hook andtighten the tether strap after raising thehead restraint (except center position)by following the manufacturer'sinstructions.

2-26


Child Restraint


Form No.8U55-EA-05G

Black plate (41,1)

Anchor bracket location (4 Door)

Anchor bracket

Tether strap position (4 Door)

Anchor bracket

Tether strap

Anchor bracket location (5 Dooroutboard position)

Tether strap position (5 Door outboardposition)

Tether strap

Anchor bracket location (5 Door centerposition)

Tether strap position (5 Door centerposition)

Tether strap


Child Restraint

2-27


Form No.8U55-EA-05G

Black plate (42,1)

WARNINGChild-Restraint Tether Usage:Using the tether or tether anchor tosecure anything but a child-restraintsystem is dangerous. This couldweaken or damage the tether or tetheranchor and result in injury. Use thetether and tether anchor only for achild-restraint system.

Incorrect Attachment of the TetherStrap (Except center position):Routing the tether strap on top of thehead restraint is dangerous. In acollision, the tether strap could slideoff the head restraint, and loosen thechild-restraint system. The child-restraint system could move whichmay result in death or injury to thechild. Always route the tether strapbetween the head restraint posts.

qIf You Must Use the Front Seatfor Children

If you cannot put all children in the rearseat, at least put the smallest children inthe rear and be sure the largest child upfront uses the shoulder belt over theshoulder.NEVER put a rear-facing child-restraintsystem on the front passenger seat, evenwith a seat weight sensor equippedvehicle.This seat is also not set up for tetheredchild-restraint systems, put them in one ofthe rear seat positions set up with tetheranchors.Likewise the LATCH child-restraintsystem cannot be secured in the frontpassenger's seat and should be used in therear seat.Don't allow anyone to sleep against theside window if you have an optional sideand curtain air bag, it could cause seriousinjuries to an out of position occupant. Aschildren more often sleep in cars, it isbetter to put them in the rear seat. Ifinstalling the child-restraint system on thefront seat is unavoidable, follow theseinstructions when using a front-facingchild-restraint system in the frontpassenger's seat.

2-28


Child Restraint


Form No.8U55-EA-05G

Black plate (43,1)

NOTE

l To check if your front seats have sideair bags:Every Mazda side air bag will have a“SRS AIRBAG” tag on the outboardshoulder of the front seats.

l To check if your vehicle has curtainair bags:Every Mazda curtain air bag willhave an “SRS AIRBAG” marking onthe front and rear window pillarsalong the roof edge.

WARNINGFront Passenger's Seat Position:As your vehicle has front air bags anddoubly so if your vehicle has side airbags, a front-facing child-restraintsystem should be put on the front seatonly when it is unavoidable.Even if the front passenger air bagdeactivation indicator lightilluminates, always move the seat asfar back as possible, because the forceof a deploying air bag could causeserious injury or death to the child.

WARNINGRear-Facing Child-Restraint System:Rear-facing child-restraint systems onthe front seat are particularlydangerous.The child-restraint system can be hitby a deploying air bag and movedviolently backward resulting in seriousinjury or death to the child. Eventhough you may feel assured that thefront passenger air bag will not deploybased on the fact that the frontpassenger air bag deactivationindicator light illuminates, NEVERuse a rear-facing child-restraintsystem in the front seat with an air bagthat could deploy even in a moderatecollision.


Child Restraint

2-29


Form No.8U55-EA-05G

Black plate (44,1)

WARNINGChildren and Seating Position withSide and Curtain Air Bags:Allowing anyone to lean over oragainst the side window, the area ofthe front passenger seat, front andrear window pillars and the roof edgealong both sides from which the sideand curtain air bags deploy, even if achild-restraint system is used, isdangerous. If the vehicle is equippedwith side and curtain air bags, theimpact of inflation could cause seriousinjury or death to the child.Furthermore, leaning over or againstthe front door could block the side andcurtain air bags and eliminate theadvantages of supplementalprotection. With the front air bag andthe additional side air bag that comesout of the front seat, the rear seat isalways a better location for children.Do not allow a child to lean over oragainst the side window, even if thechild is seated in a child-restraintsystem.

qFront Passenger's Seat Child-Restraint System Installation

1. Slide the seat as far back as possible.

2. Secure the child-restraint system withthe lap portion of the lap/shoulder belt.See the manufacturer's instructions onthe child-restraint system for beltrouting instructions.

3. To get the retractor into the automaticlocking mode, pull the shoulder beltportion of the seat belt until the entirelength of the belt is out of the retractor.

4. Push the child-restraint system firmlyinto the vehicle seat. Be sure the beltretracts as snugly as possible. Clickingfrom the retractor will be heard duringretraction if the system is in automaticlocking mode. If the belt does not lockthe seat down tight, repeat the previousstep and also this one.

2-30


Child Restraint


Form No.8U55-EA-05G

Black plate (45,1)

NOTE

l Inspect this function before each useof the child-restraint system. Youshould not be able to pull theshoulder belt out of the retractorwhile the system is in the automaticlocking mode. When you remove thechild-restraint system, be sure thebelt fully retracts to return the systemto emergency locking mode beforeoccupants use the seat belts.

l Follow the child-restraint systemmanufacturer's instructions carefully.Depending on the type of child-restraint system, it may not employseat belts which are in automaticlocking mode.

5. Make sure the front passenger air bagdeactivation indicator light illuminatesafter installing a child-restraint systemon the front passenger seat.Refer to Front passenger air bagdeactivation indicator light on page2-45.

With seat warmer

Without seat warmer


Child Restraint

2-31


Form No.8U55-EA-05G

Black plate (46,1)

WARNINGSeating a Child in a Child-RestraintSystem on the Front Passenger SeatWith the Front Passenger Air BagDeactivation Indicator Light NotIlluminated:Seating a child in a child-restraintsystem installed on the front passengerseat with the front passenger air bagdeactivation indicator light notilluminated is dangerous. If thisindicator light does not illuminateeven when the total seated weight isless than approximately 30 kg (66 lb),this means that the front passengerfront and side air bags, and seat beltpretensioner are ready for deployment.If an accident were to deploy an airbag, a child sitting in the frontpassenger seat could be seriouslyinjured or killed. If the indicator lightdoes not illuminate after installing achild-restraint system on the frontpassenger seat, install the child-restraint system on the rear seat andconsult an Authorized Mazda Dealeras soon as possible. While it is alwaysbetter to install any child-restraintsystem on the rear seat, it is essentialto do so if the front passenger air bagdeactivation indicator light does notilluminate (page 2-45).

2-32


Child Restraint


Form No.8U55-EA-05G

Black plate (47,1)

LATCH Child-Restraint SystemsYour Mazda is equipped with LATCH lower anchors for attachment of specially designedLATCH child-restraint systems in the rear seat. Both anchors must be used, otherwise theseat will bounce around and put the child in danger. Most LATCH child-restraint systemsmust also be used in conjunction with a tether to be effective. If they have a tether youmust use it to better assure your child's safety.

WARNINGManufacturer's Instructions for Child-Restraint System:An unsecured child-restraint system is dangerous. In a sudden stop or a collision itcould move causing serious injury or death to the child or other occupants. Make surethe child-restraint system is properly secured in place according to the child-restraintsystem manufacturer's instructions.

Attaching Two Child-Restraint Systems to the Same LATCH Lower Anchor:Attaching two child-restraint systems to the same LATCH lower anchor is dangerous.In a collision, one anchor may not be strong enough to hold two child-restraint systemattachments and may break, causing serious injury or death. If you use the seatposition for another child-restraint system when an outboard LATCH position isoccupied, use the center seat belts instead, and the tether if tether-equipped.

Unsecured Child-Restraint System:An unsecured child-restraint system is dangerous. In a sudden stop or a collision itcould move causing serious injury or death to the child or other occupants. Follow thechild-restraint system manufacturer's instructions on belt routing to secure the seatjust as you would with a child in it so that nobody is tempted to put a child in animproperly secured seat later on. When not in use, remove it from the vehicle or fastenit with a seat belt, or latch it down to BOTH LATCH lower anchors for LATCH child-restraint systems.

LATCH Child-Restraint Systems:Not following the child-restraint system manufacturer's instructions when installingthe child-restraint system is dangerous. If seat belts or a foreign object prevent thechild-restraint system from being securely attached to the LATCH lower anchors andthe child-restraint system is installed improperly, the child-restraint system could movein a sudden stop or collision causing serious injury or death to the child or otheroccupants. When installing the child-restraint system, make sure there are no seatbelts or foreign objects near or around the LATCH lower anchors. Always follow thechild-restraint system manufacturer's instructions.


Child Restraint

2-33


Form No.8U55-EA-05G

Black plate (48,1)

qChild-Restraint System InstallationProcedure (Rear Outboard Seats)


2. Expand the area between the seatbottom and the seatback slightly toverify the locations of the LATCHlower anchors.

NOTE

The markings above the LATCH loweranchors indicate the locations ofLATCH lower anchors for theattachment of a child-restraint system.

3. Secure the child-restraint system usingBOTH LATCH lower anchors,following the child-restraint systemmanufacturer's instruction.

4. If your child-restraint system cameequipped with a tether, that probablymeans it is very important to properlysecure the tether for child safety, pleasecarefully follow the child-restraintsystem manufacturer's instructionswhen installing tethers.


Anchor bracket


Anchor bracket

Tether strap


2-34


Child Restraint


Form No.8U55-EA-05G

Black plate (49,1)


Tether strap


Incorrect Attachment of the TetherStrap:Routing the tether strap on top of thehead restraint is dangerous. In acollision, the tether strap could slideoff the head restraint, and loosen thechild-restraint system. The child-restraint system could move whichmay result in death or injury to thechild. Always route the tether strapbetween the head restraint posts.

qChild-Restraint System InstallationProcedure (Rear Center Seat)

The LATCH lower anchors at the centerof the rear seat are much further apart thanthe sets of LATCH lower anchors forchild-restraint system installation at otherseating positions. Child-restraint systemswith rigid LATCH attachments cannot beinstalled on the center seating position.Some LATCH equipped child-restraintsystems can be placed in the centerposition and will reach the nearestLATCH lower anchors which are 400 mm(15.75 in) apart. LATCH compatiblechild-restraint systems (with attachmentson belt webbing) can be used at thisseating position only if the child-restraintsystem manufacturer's instructions statethat the child-restraint system can beinstalled to LATCH lower anchors that are400 mm (15.75 in) apart. Do not attachtwo child-restraint systems to the sameLATCH lower anchor. If your child-restraint system has a tether, it must alsobe used for your child's optimum safety.



Child Restraint

2-35


Form No.8U55-EA-05G

Black plate (50,1)

2. Expand the area between the seatbottom and the seatback slightly toverify the locations of the LATCHlower anchors.

NOTE

The markings above the LATCH loweranchors indicate the locations ofLATCH lower anchors for theattachment of a child-restraint system.

3. Secure the child-restraint system usingBOTH LATCH lower anchors,following the child-restraint systemmanufacturer's instructions.

4. If your child-restraint system cameequipped with a tether, that probablymeans it is very important to properlysecure the tether for child safety, pleasecarefully follow the child-restraintsystem manufacturer's instructionswhen installing tethers.


Anchor bracket


Anchor bracket

Tether strap


2-36


Child Restraint


Form No.8U55-EA-05G

Black plate (51,1)


Tether strap



Child Restraint

2-37


Form No.8U55-EA-05G

Black plate (52,1)

Supplemental Restraint Systems (SRS) PrecautionsThe front and side supplemental restraint systems (SRS) include up to 6 air bags (verify“SRS AIRBAG” location indicator marks).They are located in:

l The steering wheel hub (driver air bag)

l The front passenger dashboard (front passenger air bag)

l The outboard sides of the front seatbacks (side air bags)í

l The front and rear window pillars, and the roof edge along both sides (curtain air bags)í

These systems operate independently depending on the type of accident encountered; ifyou have side and curtain air bags, the side and curtain air bags are not likely to deploy onboth sides in the same accident because a vehicle is not often hit from both sides. The sideand curtain air bags and the frontal air bag system will not normally deploy during thesame type of accident unless a combination of frontal and side impacts occur.

The air bag supplemental restraint systems are designed to provide supplemental protectiononly in the front seats in certain situations and the rear outside passenger positions only insame-side collisions, so seat belts are always important in the following ways:

Without seat belt usage, the air bags cannot provide adequate protection during an accident.Seat belt usage is necessary to:

l Keep the occupant from being thrown into an inflating air bag.

l Reduce the possibility of injuries during an accident that is not designed for air baginflation, such as roll-over or rear impact.

l Reduce the possibility of injuries in frontal or side collisions that are not severe enoughto activate the air bags.

l Reduce the possibility of being thrown from your vehicle.

l Reduce the possibility of injuries to lower body and legs during an accident because theair bags provide no protection to these parts of the body.

l Hold the driver in a position which allows better control of the vehicle.

Small children must be protected by a child-restraint system as stipulated by law in everystate and province. In certain states and provinces, larger children must use a child-restraintsystem (page 2-21).Carefully consider which child-restraint system is necessary for your child and follow theinstallation directions in this Owner's Manual as well as the child-restraint systemmanufacturer's instructions.

2-38


íSome models.

SRS Air Bags


Form No.8U55-EA-05G

Black plate (53,1)

WARNINGAir Bags without Seat Belts:Depending only on the air bags for protection during an accident is dangerous. Alone,air bags may not prevent serious injuries. The appropriate air bags can be expected toinflate only in the first collision with frontal, near frontal or side forces that are atleast moderate. Vehicle occupants should always wear seat belts.

Child in the Front Seat:Placing a child, 12 years or under, in the front seat is dangerous. The child could behit by a deploying air bag and be seriously injured or even killed. Even if the frontpassenger air bag deactivation indicator light illuminates, always move the frontpassenger seat as far back as possible. A sleeping child is more likely to lean againstthe door and be hit by the side air bag in a moderate, right-side collision. Wheneverpossible, always secure a child 12 years and under on the rear seat with anappropriate child-restraint system for the child's age and size.

Rear-Facing Child-Restraint System:Rear-facing child-restraint systems on the front seat are particularly dangerous.The child-restraint system can be hit by a deploying air bag and moved violentlybackward resulting in serious injury or death to the child. Even though you may feelassured that a front passenger air bag will not deploy based on the fact that the frontpassenger air bag deactivation indicator light illuminates, NEVER use a rear-facingchild-restraint system in the front seat with an air bag that could deploy even in amoderate collision.

Seating Position with Front Air Bags:Sitting too close to the air bag modules or placing hands or feet on them is extremelydangerous. Front air bags inflate with great force and speed. Serious injuries couldoccur if someone is too close. The driver should always hold onto only the rim of thesteering wheel. The front seat passenger should keep both feet on the floor. Front seatoccupants should adjust their seats as far back as possible and always sit uprightagainst the seatbacks with seat belts worn properly.


SRS Air Bags

2-39


Form No.8U55-EA-05G

Black plate (54,1)

WARNINGSeating Position with Side and Curtain Air Bags:Sitting too close to the side air bag modules or placing hands on them is extremelydangerous. The side air bags inflate with great force and speed directly out of theoutboard side of the front seat and expand along the front door on the side the car ishit. Serious injury could occur if someone is sitting too close to the door or leaningagainst a window, or if rear seat occupants grab the sides of the front seatbacks.Furthermore, sleeping up against the door or hanging out the windows in the vehiclecould block the side and curtain air bags and eliminate the advantages ofsupplemental protection. Give the side and curtain air bags room to work by sitting inthe center of the seat while the vehicle is moving with seat belts worn properly.

Front Air Bag Modules Located in the Steering Wheel Hub and the Dashboard:Attaching an object to the front air bag modules or placing something in front of themis dangerous. In an accident, the object could interfere with front air bag inflation andinjure the occupants.Always keep the front air bag modules free of objects.

Side Air Bag Modules:Attaching things to the front seat in such a way as to cover the outboard side of theseat in any way is dangerous. In an accident the object could interfere with the side airbag, which inflates from the outboard side of the front seats, impeding the addedprotection of the side air bag system or redirecting the air bag in a way that isdangerous. Furthermore, the bag could be cut open spewing exhaust.Do not hang net bags, map pouches or backpacks with side straps on the front seats.Never use seat covers on the front seats. Always keep the side air bag modules in yourfront seats free to deploy in the event of a side collision.

Curtain Air Bag Modules:Attaching objects to the areas where the curtain air bag activates such as on thewindshield glass, side door glass, front and rear window pillars and along the roofedge and assist grips is dangerous. In an accident the object could interfere with thecurtain air bag, which inflates from the front and rear window pillars and along theroof edge, impeding the added protection of the curtain air bag system or redirectingthe air bag in a way that is dangerous. Furthermore, the bag could be cut openspewing exhaust.Do not place hangers or any other objects on the assist grips. When hanging clothes,hang them on the coat hook directly. Always keep the curtain air bag modules free todeploy in the event of a side collision.

2-40


SRS Air Bags


Form No.8U55-EA-05G

Black plate (55,1)

WARNINGHot Air Bag Inflators:Hot air bag inflators are dangerous. Immediately after inflation, the inflators in thesteering wheel, dashboard, seatbacks, or the front and rear window pillars and alongthe roof edge are very hot. You could get burned. Don't touch the internal componentsof the air bag modules after the bags have inflated.

Installation of Front-End Equipment:Installation of front-end equipment, such as frontal protection bar (kangaroo bar, bullbar, push bar, etc.), snowplow, or winches, is dangerous. The air bag crash sensorsystem could be affected. This could cause air bags to inflate unexpectedly, or it couldprevent the air bags from inflating during an accident. Front occupants could beseriously injured. Never install any front-end equipment to your vehicle.

Suspension Adjustment:Adjusting the vehicle suspension is dangerous. If the vehicle's height or thesuspension is changed, the vehicle will be unable to accurately detect a collisionresulting in incorrect or unexpected air bag deployment and the possibility of seriousinjuries.

Modification of the Supplemental Restraint System:Modifying the components or wiring of the supplemental restraint system isdangerous. You could accidentally activate it or make it inoperable. Don't make anymodifications to the supplemental restraint system. This includes installing trim,badges, or anything else over the air bag modules. It also includes installing extraelectrical equipment on or near system components or wiring. An Authorized MazdaDealer can provide the special care needed in the removal and installation of frontseats. It is important to protect the air bag wiring and connections to assure that thebags do not accidentally deploy, the driver seat slide position sensor and frontpassenger seat weight sensors are not damaged and that the seats retain anundamaged air bag connection.

NOTE

l When an air bag deploys, a loud inflation noise can be heard and some smoke will bereleased. Neither is likely to cause injury, however, the texture of the air bags maycause light skin injuries on body parts not covered with clothing through friction.

l Should you sell your Mazda, we urge you to tell the new owner of its air bag systemsand that familiarization with all instructions about them, from the Owner's Manual, isimportant.


SRS Air Bags

2-41


Form No.8U55-EA-05G

Black plate (56,1)

Supplemental Restraint System ComponentsThe supplemental restraint systems (SRS) have two basic subsystems:

l The air bag system with inflators and air bags.

l The electrical system with crash sensors and diagnostic module.

The air bags are mounted in the following locations:

l The steering wheel hub

l The front passenger dashboard

l The outboard sides of the front seatbacksí

l The front and rear window pillars, and the roof edge along both sidesí

The air bags are out of sight until activated.

2-42


íSome models.

SRS Air Bags


Form No.8U55-EA-05G

Black plate (57,1)

qFront Air Bag System Components

(1)

(6)

(10)

(7)

(6)

(9) (5)

(4)

(3)(2)

(8)

(1) Driver seat slide position sensor (page 2-45)(2) Front seats(3) Front dual stage inflators and air bags(4) Front air bag sensor(5) Front passenger air bag deactivation indicator light (page 2-45)(6) Front seat belt pretensioner and load limiting systems (page 2-14)(7) Front passenger seat weight sensors (page 2-45)(8) Front passenger seat weight sensor control module(9) Crash sensors and diagnostic module (SAS unit)(10) Driver and front passenger seat belt buckle switches (page 2-45)


SRS Air Bags

2-43


Form No.8U55-EA-05G

Black plate (58,1)

qSide and Curtain Air Bag System Componentsí

4 Door

5 Door

(4)

(1) (1)

(3)

(2)

(3)(4)

(1) (1)(2)

(1) Side and curtain inflators and air bags(2) Front seats(3) Crash sensors and diagnostic module (SAS unit)(4) Side crash sensor

2-44


íSome models.

SRS Air Bags


Form No.8U55-EA-05G

Black plate (59,1)

How the Air Bags Work

qHow the Front Air Bags Work

When air bag crash sensors detect a frontal impact of greater than moderate force, anelectrical current is sent to the inflators.Gases are produced to inflate the front air bags and after the inflation, the front air bagsquickly deflate.The front air bags will function only once. After that, the front air bags will not workagain and must be replaced.Only an Authorized Mazda Dealer can replace the system components.

The front, dual stage air bags control air bag inflation in two energy stages. During animpact of moderate severity the front air bags deploy with lesser energy, whereas duringmore severe impacts, they deploy with more energy. Deployment of the front air bags maydiffer between the driver and the front passenger depending on the driver seat position,front passenger weight and front seat belt usage, which allow for further controlling of thesystem.

The front air bags will deploy only in a frontal or frontal offset impact.

Driver seat slide position sensor

Your vehicle is equipped with a driver seat slide sensor as a part of the supplementalrestraint system. The sensor is located under the driver seat. The sensor determines whetherthe driver seat is fore or aft of a reference position and sends the seat position to the crashsensors and diagnostic module (SAS unit). The sensor is also designed to control thedeployment of the driver air bag depending on how close the driver seat is to the steeringwheel.

The air bag/front seat belt pretensioner system warning light flashes if the sensor has apossible malfunction (page 2-53).


SRS Air Bags

2-45


Form No.8U55-EA-05G

Black plate (60,1)

Front passenger seat weight sensors

If your vehicle is equipped with front passenger seat weight sensors, a front passenger airbag deactivation indicator light is also equipped (page 2-30). These sensors are locatedunder both of the front passenger seat rails. These sensors determine the total seated weighton the front passenger seat. The sensors are also designed to prevent the front passengerfront and side air bags and seat belt pretensioner system from inflating if the total seatedweight is less than approximately 30 kg (66 lb).

To reduce the chance of injuries caused by deployment of the front passenger air bag, thesystem deactivates the front passenger front and side air bags and also the seat beltpretensioner system when:

l There is no passenger in the front passenger seat. (The front passenger air bagdeactivation indicator light does not illuminate.)

l The total seated weight on the front passenger seat is less than approximately 30 kg (66lb). (The front passenger air bag deactivation indicator light illuminates.)

This system shuts off the front passenger front and side air bags and seat belt pretensionersystem, so make sure the front passenger air bag deactivation indicator light illuminatesaccording to the chart below.

The air bag/front seat belt pretensioner system warning light flashes and the frontpassenger air bag deactivation indicator light illuminates if the sensors have a possiblemalfunction. If this happens, the front passenger front and side air bags and seat beltpretensioner system will not deploy.

Front passenger air bag deactivation indicator light

This indicator light illuminates to remind you that the front passenger front and side airbags and seat belt pretensioner will not deploy during a collision.

With seat warmerWithout seat warmer

If the front passenger weight sensors are normal, the indicator light illuminates when theignition switch is turned to the ON position. After about 6 seconds it goes out.

2-46


SRS Air Bags


Form No.8U55-EA-05G

Black plate (61,1)

The front passenger air bag deactivation indicator light illuminates or is off under the following conditions:

Total seated weight on thefront passenger seat

Front passenger air bagdeactivation indicator light

Front passenger front andside air bags

Front passenger seatbelt pretensioner

system

Empty (Not occupied)* OFF OFF OFF

Less than approx. 30 kg(66 lb)

ON OFF OFF

Approx. 42 kg (93 lb) ormore

OFF ON ON

* If the front passenger seat belt is buckled, the front passenger air bag deactivation indicator light illuminates,however this does not indicate a malfunction.

If the front passenger air bag deactivation indicator light does not illuminate when theignition switch is turned to the ON position and does not illuminate as indicated in theabove chart, do not allow a child to sit in the front passenger seat and consult anAuthorized Mazda Dealer as soon as possible. The system may not work properly in anaccident.

WARNINGDecreasing the Total Seated Weight on the Front Passenger Seat:When an adult or large child sits on the front passenger seat, decreasing the totalseated weight on the front passenger seat from the total seated weight ofapproximately 42 kg (93 lb) required for air bag deployment is dangerous. The frontpassenger seat weight sensors will detect the reduced total seated weight condition andthe front passenger front and side air bags and seat belt pretensioner system will notdeploy during an accident. The front passenger will not have the supplementaryprotection of the air bag, which could result in serious injury. Decreasing the totalseated weight on the front passenger seat from the total seated weight ofapproximately 42 kg (93 lb) could result in an air bag not deploying under thefollowing conditions, for example:l A rear passenger pushes up on the front passenger seat with the feet.l Luggage or other items placed under the front passenger seat or between the frontpassenger seat and driver seat that push up the front passenger seat bottom.

l The front passenger seat occupant sits in a manner that does not place the entireweight of the occupant on the seat such as by sitting too close to the door, graspingthe rim of the moonroof and sitting with the seatback reclined too far.

l Any accessories which might decrease the total seated weight on the frontpassenger seat are attached to the front passenger seat.

The front passenger front and side air bags and seat belt pretensioner systems willdeactivate if the total seated weight on the front passenger seat is close to 30 kg (66 lb)and they will reactivate before the weight exceeds 42 kg (93 lb).


SRS Air Bags

2-47


Form No.8U55-EA-05G

Black plate (62,1)

WARNINGIncreasing the Total Seated Weight on the Front Passenger Seat:When an infant or small child sits on the front passenger seat, increasing the totalseated weight on the front passenger seat from the total seated weight ofapproximately 30 kg (66 lb) is dangerous. The front passenger seat weight sensors willdetect the increased total seated weight, which could result in the unexpecteddeployment of the front passenger front and side air bags and seat belt pretensionersystem in an accident and serious injury. Increasing the total seated weight on thefront passenger seat beyond the total seated weight of approximately 30 kg (66 lb)could result in the front passenger front and side air bags and seat belt pretensionersystem deployment in an accident under the following conditions, for example:l Luggage or other items are placed on the seat with the child in the child-restraintsystem.

l A rear passenger or luggage push or pull down on the front passenger seatback.l A rear passenger steps on the front passenger seat rails with the feet.l Luggage or other items are placed on the seatback or hung on the head restraint.l The seat is washed.l Liquids are spilled on the seat.l The front passenger seat is moved backward, pushing into luggage or other itemsplaced behind it.

l The front passenger seatback contacts the rear seat.l Luggage or other items are placed between the front passenger seat and driver seat.l Any accessories which might increase the total seated weight on the front passengerseat are attached to the front passenger seat.

The front passenger front and side air bags and seat belt pretensioner systems willdeactivate if the total seated weight on the front passenger seat is close to 30 kg (66 lb)and they will reactivate before the weight exceeds 42 kg (93 lb).

CAUTIONl To assure proper deployment of the front air bag and to prevent damage to the sensorsin the front seat bottoms:

l Do not place sharp objects on the front seat bottoms or leave heavy luggage onthem.

l Do not spill any liquids on the front seats or under the front seats.

l To allow the sensors to function properly, always perform the following:

l Adjust the front seats as far back as possible and always sit upright against theseatbacks with seat belts worn properly.

l If you place your child on the front passenger seat, secure the child-restraint systemproperly and slide the front passenger seat as far back as possible (page 2-30).

2-48


SRS Air Bags


Form No.8U55-EA-05G

Black plate (63,1)

NOTE

l The system requires about 10 seconds to alternate between turning the front passengerfront and side air bags and seat belt pretensioner system on or off.

l The front passenger air bag deactivation indicator light may illuminate repeatedly ifluggage or other items are put on the front passenger seat, or if the temperature of thevehicle's interior changes suddenly.

l The front passenger air bag deactivation indicator light may illuminate for 10 secondsif the total seated weight on the front passenger seat changes.

l If the front passenger air bag deactivation indicator light does not illuminate afterinstalling a child-restraint system on the front passenger seat, install the child-restraintsystem on the rear seat and consult an Authorized Mazda Dealer as soon as possible.

Driver and front passenger buckle switches

The buckle switches on the front seat belts detect whether or not the front seat belts aresecurely fastened and further control the deployment of the air bags.

qHow the Side and Curtain Air Bags Workí

When air bag crash sensors detect a side impact of greater than moderate force, anelectrical current is sent to the inflators.Gases are produced to inflate the side and curtain air bags and after the inflation, the sideand curtain air bags quickly deflate.The side and curtain air bags will function only once. After that, the side and curtain airbags will not work again and must be replaced. Only an Authorized Mazda Dealer canreplace the systems.

The side and curtain air bags will deploy only on the side the vehicle receives the force of the impact.


SRS Air Bags

2-49íSome models.


Form No.8U55-EA-05G

Black plate (64,1)

WARNINGDamaged Side and Curtain Air Bag Wiring under the Front Seats:Placing luggage or other objects under the front seats is dangerous. The side andcurtain air bag wiring could be damaged, and in the event of a side collision, the sideand curtain air bags may not deploy, which could result in death or serious injury. Toprevent damage to the side and curtain air bag wiring, do not place luggage or otherobjects under the front seats.

qAir Bag Activation/Deactivation

NOTE

If the front passenger seat weight sensors detect a total seated weight on the frontpassenger seat is less than approximately 42 kg (93 lb), the front passenger front and sideair bags and seat belt pretensioner may not inflate (page 2-45).

Front air bag activation

A greater than moderate impact will causethe front air bags to inflate in thefollowing cases:

l Hitting a solid wall straight on atgreater than about 22 km/h (14 mph).

l Hitting a curb, pavement edge or hardobject.

l Landing hard or the vehicle falling.

l Frontal impact within about a 30degree range from head-on to thevehicle.

2-50


SRS Air Bags


Form No.8U55-EA-05G

Black plate (65,1)

l Driving into a big hole or hitting the farside of a hole.

Limitations to front air bag activation

Depending on the severity of impact, thefront air bags may not inflate in thefollowing cases:

l Impacts involving trees or poles causesevere cosmetic damage but may nothave enough stopping force to activatethe air bag.

l Frontal offset impact to the vehiclemay not provide the stopping forcenecessary for air bag deployment.

l Rear-ending or running under a truck'stail gate may not provide the stoppingforce necessary for air bag deployment.

Non-activation of front air bags

Front air bags will not normally inflate inthe following cases:

l Collision from the rear.

l Impact to the side, but it may deploythe side and curtain air bags.

l Vehicle roll-over, may deploy the sideand curtain air bags but not the front airbags.


SRS Air Bags

2-51


Form No.8U55-EA-05G

Black plate (66,1)

Side and curtain air bag activationí

Greater than moderate impact to one sideof the vehicle (driver or passenger sideareas) will cause the side and curtain airbags on that side to inflate, but it will notnormally deploy the front air bags.

Limitations to side and curtain air bagactivationí

Depending on the severity of impact, theside and curtain air bags may not inflate inthe following cases:

l Frontal offset impact may not provideenough side impact to deploy the sideand curtain air bags.

l Side impacts involving trees or polescan cause severe cosmetic damage butmay not have enough impact force toactivate the side and curtain air bags.

l Vehicle roll-over may not provideenough side force to deploy the sideand curtain air bags.

l Side impacts with two-wheeledvehicles may not provide enough forceto deploy the side and curtain air bags.

Non-activation of side and curtain airbagí

The side and curtain air bags will notnormally inflate in the following cases:

l Collision from the rear.

l Collision from the front, but it maydeploy the front air bags.

2-52


íSome models.

SRS Air Bags


Form No.8U55-EA-05G

Black plate (67,1)

qConstant Monitoring

The following components of the air bagsystems are monitored by a diagnosticsystem:

l SAS unit

l Front air bag sensor

l Air bag modules

l Side crash sensorsí

l Front seat belt pretensioners

l Related wiring

l Driver seat slide position sensor

l Front passenger seat weight sensors

l Driver and front passenger seat beltbuckle switches

The diagnostic module continuouslymonitors the system's readiness. Thisbegins when the ignition switch is turnedto the ON position and continues whilethe vehicle is being driven.









SRS Air Bags

2-53íSome models.


Form No.8U55-EA-05G

Black plate (68,1)


qMaintenance

The air bag systems do not require regularmaintenance. But if any of the followingoccurs, take your vehicle to an AuthorizedMazda Dealer as soon as possible:

l The air bag system warning lightflashes.

l The air bag system warning lightremains illuminated.

l The air bag system warning light doesnot illuminate when the ignition switchis turned to the ON position.

l The air bags have deployed.

l Front passenger air bag deactivationindicator light does not illuminatewhen the ignition switch is turned tothe ON position or does not illuminateas indicated in the chart. For moredetails about this indicator light andthis chart, refer to “Front passengerseat weight sensors” (page 2-45).

WARNINGDamaged Air Bag/Seat BeltPretensioner System Components:Expended or damaged air bag or seatbelt pretensioner units must bereplaced after any collision whichcaused them to deploy or damagethem. Only a trained AuthorizedMazda Dealer can fully evaluate thesesystems to see that they will work inthe next accident. Driving with anexpended or damaged air bag orpretensioner units will provide youreduced protection in the next accidentand you could be injured or killed.

Removing Interior Parts:Removing any components such as thefront seats, front dashboard, thesteering wheel or parts on the frontand rear window pillars and along theroof edge, containing air bag parts orsensors is dangerous. These partscontain essential air bag components.The air bag could accidentally activateand cause serious injuries. Alwayshave an Authorized Mazda Dealerremove these parts.

Air Bag Disposal:Improper disposal of an air bag or avehicle with live air bags in it can beextremely dangerous. Unless all safetyprocedures are followed, injury canresult. Ask an Authorized MazdaDealer how to safely dispose of an airbag or how to scrap an air bagequipped vehicle.

2-54


SRS Air Bags


Form No.8U55-EA-05G

Black plate (69,1)

NOTE

If it becomes necessary to have thecomponents or wiring system for thesupplementary restraint systemmodified to accommodate a person withcertain medical conditions inaccordance with a certified physician,contact an Authorized Mazda Dealer,refer to “Customer Assistance (U.S.A.)”(page 9-2).


SRS Air Bags

2-55


Form No.8U55-EA-05G

Black plate (70,1)

2-56


Form No.8U55-EA-05G

Black plate (71,1)

3 Knowing Your Mazda

Explanation of basic operations and controls; opening/closing and adjustmentof various parts.

Doors and Locks ........................................................................... 3-2Keys .......................................................................................... 3-2Keyless Entry Systemí ............................................................ 3-3Door Locks ............................................................................... 3-6Liftgate (5 Door) ....................................................................... 3-9Trunk Lid (4 Door) ................................................................. 3-12Inside Trunk Release Lever (4 Door) ...................................... 3-15Power Windowsí ................................................................... 3-16Fuel-Filler Lid and Cap ........................................................... 3-18Hood ....................................................................................... 3-20Moonroofí ............................................................................. 3-21

Security System ........................................................................... 3-23Immobilizer System ................................................................ 3-23Theft-Deterrent Systemí ........................................................ 3-26

Steering Wheel and Mirrors ...................................................... 3-28Steering Wheel ........................................................................ 3-28Mirrors .................................................................................... 3-28

3-1íSome models.


Form No.8U55-EA-05G

Black plate (72,1)

Keys

WARNINGKeys and Children:Leaving children in a vehicle with thekey is dangerous. This could result insomeone being badly injured or evenkilled. They could play with powerwindows or other controls, or evenmake the vehicle move. Don't leave thekeys in your vehicle with children andkeep them in a place where yourchildren will not find or play withthem.

NOTE

l Refer to Immobilizer System (page3-23) for information regarding keysand engine starting.

l (With theft-deterrent system)Refer to Theft-Deterrent System(page 3-26) for informationregarding keys and the prevention ofvehicle and vehicle contents theft.

The keys operate all locks.

Key code number plate

A code number is stamped on the plateattached to the key set; detach this plateand store it in a safe place (not in thevehicle) for use if you need to make areplacement key.

NOTE

Write down the code number and keepit in a separate, safe and convenientplace, but not in the vehicle.If your key is lost, consult yourAuthorized Mazda Dealer and haveyour code number ready.

3-2

Knowing Your Mazda

Doors and Locks


Form No.8U55-EA-05G

Black plate (73,1)

Keyless Entry Systemí

This system remotely locks and unlocksthe doors and the liftgate.It can also help you signal for attention.Press the button slowly and carefully.

CAUTIONTo avoid damage to the transmitter, donot:

l Drop it.

l Get it wet.

l Disassemble it.

l Expose it to heat or sunlight.

NOTE

l The keyless entry system is designedto operate up to about 2.5 m (8 ft)from the center of the vehicle, butthis may vary due to localconditions.

l The system doesn't operate when thekey is in the ignition switch.

l If the transmitter does not operatewhen pressing a button or theoperation range becomes too small,the battery may be dead. To install anew battery, refer to Maintenance(page 3-5).

l Additional transmitters can beobtained at an Authorized MazdaDealer. Up to 3 transmitters can beused with the keyless entry systemper vehicle. Bring all transmitters toan Authorized Mazda Dealer whenthe electronic codes need to be reset.

qTransmitter

Panic button

Lock button

Unlock button

NOTE

l (U.S.A.)This device complies with Part 15 ofthe FCC Rules. Operation is subjectto the following two conditions: (1)this device may not cause harmfulinterference, and (2) this device mustaccept any interference received,including interference that may causeundesired operation.

l (CANADA)This device complies with RSS-210of Industry CANADA. Operation issubject to the following twoconditions: (1) this device may notcause interference, and (2) thisdevice must accept any interference,including interference that may causeundesired operation of the device.

Lock button

To lock the doors and the liftgate, pressthe lock button and the hazard warninglights will flash once.

Knowing Your Mazda

Doors and Locks

3-3íSome models.


Form No.8U55-EA-05G

Black plate (74,1)

To confirm that all doors and the liftgatehave been locked, press the lock buttonagain within 5 seconds. If they are closedand locked, the horn will sound.

NOTE

(Without theft-deterrent system)The hazard warning lights will flashonce to indicate that all doors and theliftgate are locked.(With theft-deterrent system)

l The hazard warning lights will notflash.

l The hazard warning lights only flashwhen the theft deterrent system isarmed, refer to the theft-deterrentsystem (page 3-26).

NOTE

l All doors and the liftgate cannot belocked when either front door isopen and the key is in the ignitionswitch.

l Confirm that all doors and theliftgate are locked visually or audiblyby use of the double click.

Unlock button

To unlock the driver's door, press theunlock button and the hazard warninglights will flash twice.

To unlock all doors and the liftgate, pressthe unlock button again within 5 seconds.

NOTE

(Without theft-deterrent system)The hazard warning lights will flashtwice to indicate that all doors and theliftgate are unlocked.(With theft-deterrent system)

l The hazard warning lights will notflash.

l The hazard warning lights only flashwhen the theft deterrent system isturned off, refer to the theft-deterrentsystem (page 3-26).

NOTE

After unlocking with the transmitter, alldoors and the liftgate will automaticallylock if one of the doors or the liftgate isnot opened within about 30 seconds.

Panic button

If you witness from a distance someoneattempting to break into or damage yourvehicle, pressing the panic button willactivate the vehicle's alarm.

NOTE

The panic button will work whetherany door or the liftgate is open orclosed.

Turning on the alarm

Pressing the panic button once will triggerthe alarm for about 2 minutes and 30seconds, and the following will occur:

l The horn sounds intermittently.

l The hazard warning lights flash.

3-4

Knowing Your Mazda

Doors and Locks


Form No.8U55-EA-05G

Black plate (75,1)

Turning off the alarm

Press any button on the transmitter.

qTransmitter Maintenance

CAUTIONl Install the battery with the positivepole ( ) facing up. Battery leakagecould occur if it is not installedcorrectly.

l When replacing the battery, becareful not to bend the electricalterminals or get oil on them. Also becareful not to get dirt in thetransmitter as it could be damaged.

l There is the danger of explosion ifthe battery is not correctly replaced.

l Replace only with the same typebattery (CR2025 or equivalent).

l Dispose of used batteries accordingto the following instructions.

l Insulate the plus and minusterminals of the battery usingcellophane or equivalent tape.

l Never disassemble.l Never throw the battery into fire

and/or water.l Never deform or crush.

Replacing the transmitter battery

1. Insert a small screwdriver into the slotand gently pry open the transmitter.

Back cover

Slot

2. Press the portion of the batteryindicated by A and remove the battery.

A

Knowing Your Mazda

Doors and Locks

3-5


Form No.8U55-EA-05G

Black plate (76,1)

3. Install a new battery (CR2025 orequivalent) into the front portion of theholder with the positive pole ( )facing up. Press on the B portion of thebattery to set the battery.

B

Back cover

Front cover

Front of holder

4. Align the front and back covers andsnap the transmitter shut.

qService

If you have a problem with the keylessentry system, consult an AuthorizedMazda Dealer.

If your transmitter is lost or stolen, bringall remaining transmitters to anAuthorized Mazda Dealer as soon aspossible for a replacement and to makethe lost or stolen transmitter inoperative.

CAUTIONRadio equipment like this is governedby laws in the United States.Changes or modifications not expresslyapproved by the party responsible forcompliance could void the user'sauthority to operate the equipment.

Door Locks

WARNINGUnattended Children and Pets:Leaving a child or an animalunattended in a parked vehicle isdangerous. In hot weather,temperatures inside a vehicle canbecome high enough to cause braindamage or even death. Always take allchildren and animals with you orleave a responsible person with them.

Keys and Children:Leaving children in a vehicle with thekey is dangerous. This could result insomeone being badly injured or evenkilled. They could play with powerwindows or other controls, or evenmake the vehicle move. Don't leave thekeys in your vehicle with children andkeep them in a place where yourchildren will not find or play withthem.

Unlocked Doors:Unlocked doors in a moving vehicleare dangerous. Passengers can fall outif a door is accidentally opened andcan more easily be thrown out in anaccident. So keep all doors lockedwhen driving.

3-6

Knowing Your Mazda

Doors and Locks


Form No.8U55-EA-05G

Black plate (77,1)

WARNINGVehicles Left Unlocked:(Except 4 Door)Leaving your vehicle unlocked isdangerous as children could lockthemselves in a hot vehicle, whichcould result in death. Also, a vehicleleft unlocked becomes an easy targetfor thieves and intruders. Always closeall the windows, lock the doors andtake the key with you when leavingyour vehicle unattended.(4 Door)Leaving your vehicle unlocked isdangerous as children could lockthemselves in a hot vehicle, or becometrapped by climbing into the trunk,which could result in death. Also, avehicle left unlocked becomes an easytarget for thieves and intruders.Always close all the windows, lock thedoors and take the key with you whenleaving your vehicle unattended.

qLocking, Unlocking with Key

The driver's door can be locked/unlockedwith the key.Turn the key toward the front to unlock,toward the back to lock.

Unlock

Lock

NOTE

If your vehicle is equipped with a frontpassenger door key slot, the door can belocked/unlocked with the key.

qLocking, Unlocking withTransmitterí

The doors can be locked/unlocked byoperating the keyless entry systemtransmitter, refer to Keyless Entry System(page 3-3).

qLocking, Unlocking with Door-Lock Knob

To lock any door from the inside, push thedoor-lock knob.To unlock, pull it out.This does not operate the other doorlocks.

Unlock

Lock

Knowing Your Mazda

Doors and Locks

3-7íSome models.


Form No.8U55-EA-05G

Black plate (78,1)

To lock any door with the door-lock knobfrom the outside, push the door-lock knobto the lock position and close the door.This does not operate the other doorlocks.

Door-lock knob (Lock position)

NOTE

When locking the doors this way, becareful not to leave the key inside thevehicle.

qPower Door Locks

Vehicle lock-out prevention

The vehicle lock-out prevention featureprevents you from locking yourself out ofthe vehicle. With the key in the ignitionswitch, all doors and the liftgate willautomatically unlock if they are lockedusing the power door locks with eitherfront door open.

Locking, unlocking with key

All doors and the liftgate lockautomatically when the driver's door islocked with the key. All doors and theliftgate unlock when the driver's door isunlocked and the key is held in the unlockposition for one second or longer.

Unlock

Lock

NOTE

Holding the key in the unlockedposition in the driver's door lock forabout a second unlocks all doors andthe liftgate. To unlock only the driver'sdoor, insert the key into the driver'sdoor lock and turn the key briefly to theunlock position and then immediatelyreturn it to the center position.

3-8

Knowing Your Mazda

Doors and Locks


Form No.8U55-EA-05G

Black plate (79,1)

Locking, unlocking with door-lockswitch

All doors and the liftgate lockautomatically when LOCK is pushed.They all unlock when the unmarked partof the door-lock switch is pushed.

Unlock

Lock

qRear Door Child Safety Locks

These locks are intended to help preventchildren from accidentally opening therear doors. Use them both whenever achild rides in the vehicle.

If you insert the key and turn the childsafety lock to the lock position beforeclosing that door, the door cannot beopened from the inside.The door can be opened only by liftingthe outside handle.

Lock

Unlock

Liftgate (5 Door)

WARNINGOpen Liftgate and Exhaust Gas:Exhaust gas in the cabin of a vehicleis dangerous. An open liftgate in amoving vehicle will cause exhaust gasto be drawn into the cabin. This gascontains CO (carbon monoxide),which is colorless, odorless, andhighly poisonous, and it can causeloss of consciousness and death.Moreover, an open liftgate could causeoccupants to fall out in an accident.Do not drive with the liftgate open.

qLocking, Unlocking with Transmitter

The liftgate can be locked/unlocked byoperating the keyless entry systemtransmitter, refer to Keyless Entry System(page 3-3).

qLocking, Unlocking with Door-Lock Switch

The liftgate can be locked/unlocked byoperating the door-lock switch, refer toPower Door Locks (page 3-8).

Knowing Your Mazda

Doors and Locks

3-9


Form No.8U55-EA-05G

Black plate (80,1)

qOpening and Closing the Liftgate

Opening the liftgate

Pull the handle and lift up the liftgate.

NOTE

If the vehicle battery is dead or there isa malfunction in the electrical systemand the liftgate cannot be unlocked,perform the following procedure as anemergency measure to unlock it:

1. Remove the cap on the interiorsurface of the liftgate with a flatheadscrewdriver.

Cap

NOTE

2. Turn the lever to the right to unlockthe liftgate.

Lever

After performing this emergencymeasure, have the vehicle inspected atan Authorized Mazda Dealer as soon aspossible.

Closing the liftgate

Use both hands to push the liftgate downuntil the lock snaps shut. Do not slam it.Pull up on the liftgate to make sure it issecurely latched.

3-10

Knowing Your Mazda

Doors and Locks


Form No.8U55-EA-05G

Black plate (81,1)

qLuggage Compartment

WARNINGPlacing Cargo on the Cover:Placing luggage or other cargo on topof the luggage compartment cover isdangerous. During sudden braking ora collision, the cargo could become aprojectile that could hit and injuresomeone. The vehicle has a lightweight luggage compartment cover tokeep the contents of your luggage areaout of sight; it will not retain heavyobjects that are not tied down in anaccident like a rollover. Tie down allheavy objects, whether luggage orcargo, using the tie down hooks. Don'tplace anything on top of the cover.

Not Securing Luggage and Cargo:Not securing cargo while driving isdangerous as it could move or becrushed during sudden braking or acollision and cause injury. Make sureluggage and cargo is secured beforedriving.

CAUTIONMake sure the luggage compartmentcover is firmly secured. If it is notfirmly secured, it could unexpectedlydisengage resulting in injury.

Luggage compartment cover strap

The luggage compartment can beaccessed by opening the liftgate when thestraps are attached to the sides of theliftgate.

Strap

Luggage compartment cover

The luggage compartment can beaccessed by opening the luggagecompartment cover from the inside of thevehicle.

Latch

Latch

Knowing Your Mazda

Doors and Locks

3-11


Form No.8U55-EA-05G

Black plate (82,1)

CAUTIONTo prevent cargo from shifting whiledriving or during sudden deceleration,be careful of the following:

l Do not open the luggagecompartment cover while the vehicleis moving.

l Do not overload the luggagecompartment so that the covercannot be closed.

l Do not allow cargo to interfere withthe luggage compartment coverlatch.

This cover can be removed for moreroom. To do this, just unfasten the straps;then lift and pull it out.

Trunk Lid (4 Door)

WARNINGOpen Trunk and Exhaust Gas:Exhaust gas in the cabin of a vehicleis dangerous. This gas contains CO(carbon monoxide), which is colorless,odorless, and highly poisonous. Ifinhaled, it can cause loss ofconsciousness and death. Becauseexhaust gas can get into the cabinthrough an open trunk, keep the trunkclosed when driving.

3-12

Knowing Your Mazda

Doors and Locks


Form No.8U55-EA-05G

Black plate (83,1)

qOpening and Closing the Trunk

WARNINGTrunk Access and Children:Leaving the trunk lid open or leavingchildren in the vehicle with the keys isdangerous. Children could open thetrunk lid and climb inside resulting inpossible injury or death from heatexposure. Close the trunk lid, lock therear seatbacks and do not allowchildren to play inside the vehicle.

Unattended Children and Pets:Leaving children or animalsunattended in a parked vehicle isdangerous. Babies left sleeping andkids who lock themselves in cars ortrunks can die very quickly from heatprostration. Don't leave your childrenor pets alone in a car at any time.Don't leave the car, the rear foldingseats or the trunk unlocked. Alwayskeep the car from being a temptingplace to play by locking rear seats,doors and the trunk, and keeping thekeys where children can not play withthem.

CAUTIONFor vehicles equipped with a rearspoiler, do not lift the trunk lid by thespoiler. Lifting up the trunk lid by therear spoiler could cause damage to therear spoiler and the trunk lid.

Opening the trunk lid with the key

Insert the key into the slot and turn itclockwise.

Open

Opening the trunk lid with the remoterelease lever

Pull up the release lever next to thedriver's seat.

Release lever

Closing the trunk lid

Use both hands to push the trunk lid downuntil the lock snaps shut. Do not slam it.Pull up on the trunk lid to make sure it issecure.

Knowing Your Mazda

Doors and Locks

3-13


Form No.8U55-EA-05G

Black plate (84,1)

qTrunk Security

In some situations you may want toprevent the trunk from being opened withthe remote trunk lid release lever.

Give your key only to someone you trust.

To secure the trunk lid, lock the rearseatbacks (page 2-8), push the trunk locklever up, and close the trunk.

To cancel the security feature, insert thekey into the lock, turn the key clockwise,and pull the trunk lock lever down.

Unlock

Lock

Trunk lock lever

qTrunk Light

The trunk light is on when the lid is openand off when it's closed.

NOTE

To prevent the battery from beingdischarged, do not leave the trunk openfor a long period when the engine is notrunning.

3-14

Knowing Your Mazda

Doors and Locks


Form No.8U55-EA-05G

Black plate (85,1)

Inside Trunk ReleaseLever (4 Door)

Your vehicle is equipped with an insidetrunk release lever that provides a meansof escape for children and adults in theevent they become locked inside thetrunk.

No matter how careful adults might bewith keys and locking their cars, parentsshould be aware that children may betempted to play around vehicles and usethe trunk as a hiding place.

Adults are advised to familiarizethemselves with the operation andlocation of the inside trunk release leverso that all children can be told about it inan appropriate way, keeping in mind thatmost vehicles don't have such levers.

WARNINGTrunk Access and Children:Leaving the trunk lid open or leavingchildren in the vehicle with the keys isdangerous. Children could open thetrunk lid and climb inside resulting inpossible injury or death from heatexposure. Close the trunk lid, lock therear seatbacks and do not allowchildren to play inside the vehicle.

Unattended Children and Pets:Leaving children or animalsunattended in a parked vehicle isdangerous. Babies left sleeping andkids who lock themselves in cars ortrunks can die very quickly from heatprostration. Don't leave your childrenor pets alone in a car at any time.Don't leave the car, the rear foldingseats or the trunk unlocked. Alwayskeep the car from being a temptingplace to play by locking rear seats,doors and the trunk, and keeping thekeys where children can not play withthem.

Knowing Your Mazda

Doors and Locks

3-15


Form No.8U55-EA-05G

Black plate (86,1)

qOpening the Trunk Lid from theInside

Slide the inside trunk release lever in thedirection of the arrow. The lever is madeof material that will glow for hours in thedarkness of the trunk following a briefexposure to ambient light.

The inside trunk release lever is locatedon the inside of the trunk lid.

Power Windowsí

The ignition switch must be in the ONposition for the power windows tooperate.

WARNINGClosing Power Windows:Closing power windows aredangerous. A person's hands, head, oreven neck could be caught by thewindow and result in serious injury oreven death.This warning applies especially tochildren. Make sure the opening isclear before closing a window.

Children and Power Windows:Leaving the power window switchesunlocked while children are in thevehicle is dangerous. Power windowswitches that are not locked with thepower window lock switch would allowchildren to operate power windowsunintentionally which could result inserious injury if a child's hands, heador neck becomes caught by thewindow. Always lock all passengerpower windows with the powerwindow lock switch on the driver'sside while children are in the vehicle,and never allow children to play withpower window switches.

CAUTIONTo prevent burning out the fuse anddamaging the power window system,don't open or close more than threewindows at once.

3-16

Knowing Your Mazda

íSome models.

Doors and Locks


Form No.8U55-EA-05G

Black plate (87,1)

qOperating the Driver's SidePower Window

Manual opening/closing

To open the window to the desiredposition, lightly hold down the switch.To close the window to the desiredposition, lightly pull up the switch.

CloseLeft front window

Open

Auto-opening

To fully open the window automatically,press the switch completely down.

To stop the window partway, lightly pullup the switch and then release it.

qOperating the Passenger PowerWindows

The power windows may be operatedwhen the power window lock switch onthe driver's door is in the unlockedposition.

The passenger windows may be opened orclosed by the power window mastercontrol switches on the driver's door.

Right front window

Left rear window

Right rear windowPower window lock switch

To open the window to the desiredposition, hold down the switch.To close the window to the desiredposition, pull up the switch.

Close

Open

Knowing Your Mazda

Doors and Locks

3-17


Form No.8U55-EA-05G

Black plate (88,1)

qPower Window Lock Switch

With the lock switch in the unlockedposition, all power windows on each doorcan be operated.

With the lock switch in the lockedposition, only the driver's side powerwindow can be operated.

Locked position

Unlocked position

WARNINGUnintentional Window Operation:Unintentional power windowoperation is dangerous. A person'shands, head, or neck could be caughtby the window and result in seriousinjury. Unless a passenger needs tooperate a power window, keep thepower window lock switch in thelocked position.

Fuel-Filler Lid and Cap

WARNINGFuel Spray:Fuel spray is dangerous. Fuel canburn skin and eyes and cause illness ifingested. Fuel spray is released whenthere is pressure in the fuel tank andthe fuel cap is removed too quickly.When removing the fuel cap, loosenthe cap slightly and wait for anyhissing to stop. Then remove it.

Fuel Vapor:Fuel vapor is dangerous. It could beignited by sparks or flames causingserious burns and injuries. Beforerefueling, stop the engine, and alwayskeep sparks and flames away from thefiller neck. Additionally, use of theincorrect fuel filler cap or not using afuel filler cap may result in fuel leak,which could result in serious burns ordeath in an accident.

CAUTIONAlways use only a genuine Mazda fuelcap or an approved equivalent,available at an Authorized MazdaDealer. The wrong cap can result in aserious malfunction of the fuel andemission control systems. It may alsocause the check engine light in theinstrument cluster to illuminate.

3-18

Knowing Your Mazda

Doors and Locks


Form No.8U55-EA-05G

Black plate (89,1)

qFuel-Filler Lid

To open, pull up the remote fuel-filler lidrelease.4 Door

Remote fuel-filler lid release

5 Door

Remote fuel-filler lid release

qFuel-Filler Cap

To remove the filler cap, turn itcounterclockwise.

To close the filler cap, turn it clockwiseuntil it clicks.

Open

Close

CAUTIONMake sure the fuel-filler cap istightened securely. The check enginelight may illuminate when the cap isn'ttightened securely. If the light remainson (even after you have tightened thecap securely, driven, and restarted theengine several times), it may indicate adifferent problem. Contact anAuthorized Mazda Dealer as soon aspossible.

Knowing Your Mazda

Doors and Locks

3-19


Form No.8U55-EA-05G

Black plate (90,1)

Hood

WARNINGClosed and Securely Locked Hood:A hood that is not closed and securelylocked is dangerous as it could flyopen while the vehicle is moving andblock the driver's vision which couldresult in a serious accident. Alwayscheck that the hood is closed andsecurely locked.

qOpening the Hood

1. With the vehicle parked, pull therelease handle to unlock the hood.

2. Slide the hood latch and lift the hood.

4 Door

5 Door

3. Grasp the support rod in the paddedarea indicated by the arrow.

Clip

Support rod

Pad

4. Secure the support rod in the stay holeindicated by the arrow to hold the hoodopen.

Clip

Support rod

3-20

Knowing Your Mazda

Doors and Locks


Form No.8U55-EA-05G

Black plate (91,1)

qClosing the Hood

1. Check under the hood area to makecertain all filler caps are in place andall loose items (e.g. tools, oilcontainers, etc.) have been removed.

2. Insert the support rod in its clip whileholding up the hood. Verify that thesupport rod is secured in the clip beforeclosing the hood.

3. Close the hood so that it locks securely.

Moonroofí

The moonroof can be opened or closedelectrically only when the ignition switchis in the ON position.

Tilt switch

Slide switch

WARNINGExtending the Head or Arms Throughthe Moonroof:Extending the head, arms, or otherparts of the body through themoonroof is dangerous. The head orarms could hit something while thevehicle is moving. This could causeserious injury or death. Don't letpassengers stand up or extendanything through the open moonroofwhile the vehicle is moving.

Closing the Moonroof:A closing moonroof is dangerous. Thehands, head, or even neck of a person―especially a child― could be caughtin it as it closes, causing serious injuryor even death. Make sure the openingis clear before closing the moonroof.

Knowing Your Mazda

Doors and Locks

3-21íSome models.


Form No.8U55-EA-05G

Black plate (92,1)

NOTE

After washing your Mazda or after arain, wipe the water off the moonroofbefore operating it to avoid waterpenetration which could cause rust andwater damage to your headliner.

qTilt Operation

The rear of the moonroof can be tiltedopen to provide more ventilation.

To fully tilt automatically, push the rear ofthe tilt switch.To stop tilting partway, push any part ofthe tilt or slide switch.

To close to the desired position, push thefront of the tilt or slide switch.

Close

Tilt up

Close

qSlide Operation

To fully open automatically, push the rearof the slide switch.To stop sliding partway, push any part ofthe tilt or slide switch.

To close to the desired position, push thefront of the tilt or slide switch.

CloseClose

Open

qSunshade

The sunshade can be opened and closedby hand.

The sunshade opens automatically whenthe moonroof is opened, but must beclosed by hand.

Sunshade

CAUTIONThe sunshade doesn't tilt. To avoiddamaging the sunshade, don't push upon it.

3-22

Knowing Your Mazda

Doors and Locks


Form No.8U55-EA-05G

Black plate (93,1)

Immobilizer SystemThe immobilizer system allows the engineto start only with a key the systemrecognizes.

If someone attempts to start the enginewith an unrecognized key, the engine willnot start, thereby helping to prevent thetheft of your vehicle.

CAUTIONl Radio equipment like this isgoverned by laws in the UnitedStates.Changes or modifications notexpressly approved by the partyresponsible for compliance couldvoid the user's authority to operatethe equipment.

l To avoid damage to the key, do not:

l Drop the key.l Get the key wet.l Expose the key to any kind of

magnetic field.l Expose the key to high

temperatures on places such as thedashboard or hood, under directsunlight.

CAUTIONWhen starting the engine do not allowthe following, as the engine may notstart due to the electronic signal fromthe ignition key not being transmittedcorrectly.

l A key ring rests on the key grip.

l Metal parts of other keys or metalobjects touch the key grip.

l Spare keys or keys for other vehiclesequipped with an immobilizersystem touch or come near the keygrip.

l Devices for electronic purchases, orsecurity passage touch or come nearthe key.

Knowing Your Mazda

Security System

3-23


Form No.8U55-EA-05G

Black plate (94,1)

NOTE

l (U.S.A.)This device complies with Part 15 ofthe FCC Rules. Operation is subjectto the following two conditions: (1)this device may not cause harmfulinterference, and (2) this device mustaccept any interference received,including interference that may causeundesired operation.

l (CANADA)This device complies with RSS-210of Industry CANADA. Operation issubject to the following twoconditions: (1) this device may notcause interference, and (2) thisdevice must accept any interference,including interference that may causeundesired operation of the device.

qOperation

Arming

The system is armed when the ignitionswitch is turned from the ON to the ACCposition.The security indicator light in theinstrument panel flashes every 2 secondsuntil the system is disarmed.

Disarming

The system is disarmed when the ignitionswitch is turned to the ON position withthe correct ignition key.The security indicator light illuminates forabout 3 seconds and goes out.

If the engine doesn't start with the correctignition key, and the security indicatorlight keeps illuminating or flashing, thesystem may have a malfunction. Consultan Authorized Mazda Dealer.

NOTE

l If the security indicator light comeson and stays on when the ignitionswitch is turned to the ON position,the engine will not start.

l Signals from a TVor radio station, orfrom a transceiver or a mobiletelephone, could interfere with yourimmobilizer system. If you are usingthe proper key and your engine failsto start, check the security indicatorlight. If it is flashing, remove theignition key and wait 2 seconds ormore, then reinsert it and try startingthe engine again. If it doesn't startafter 3 or more tries, contact anAuthorized Mazda Dealer.

l If the security indicator light flashescontinuously while you are driving,don't shut off the engine. Go to anAuthorized Mazda Dealer and haveit checked. If you shut off the enginewhile the light is flashing you won'tbe able to restart it.

3-24

Knowing Your Mazda

Security System


Form No.8U55-EA-05G

Black plate (95,1)

NOTE

l Since the electronic codes are resetwhen repairing the immobilizersystem, the keys are needed. Bringall the existing keys to an AuthorizedMazda Dealer.

qMaintenance

If you have a problem with theimmobilizer system or the key, consult anAuthorized Mazda Dealer.

NOTE

l The keys carry a unique electroniccode. For this reason, and to assureyour safety, obtaining replacementkey requires some waiting time.They are only available through anAuthorized Mazda Dealer.

l Always keep a spare key, in case oneis lost. If a key is lost, contact anAuthorized Mazda Dealer as soon aspossible.

l If you lose a key, an AuthorizedMazda Dealer will reset theelectronic codes of your remainingkeys and immobilizer system. Bringall the remaining keys to anAuthorized Mazda Dealer to reset.Starting the vehicle with a key thathas not been reset is not possible.

qModification and Add-OnEquipment

Mazda cannot guarantee the immobilizersystem's operation if the system has beenmodified or if any add-on equipment hasbeen installed to it.

CAUTIONTo avoid damage to your vehicle, donot modify the system or install anyadd-on equipment to the immobilizersystem or the vehicle.

Knowing Your Mazda

Security System

3-25


Form No.8U55-EA-05G

Black plate (96,1)

Theft-Deterrent Systemí

The theft-deterrent system is designed toprevent your vehicle or its contents frombeing stolen when all doors, hood, andtrunk lid/liftgate are locked.

If forcible entry is attempted, the systemsounds the horn and flashes the hazardwarning lights.

NOTE

l The theft-deterrent system operateswith the key or the keyless entrysystem transmitter.

l The system will not function unlessit is properly armed. To properlysecure the vehicle, always make sureall windows are completely closedand all doors and the trunk lid/liftgate are locked before leaving thevehicle. Remember to take your keyand transmitter.

qOperation

System triggering conditions

The horn sounds intermittently and thehazard warning lights flash for about 3minutes when the system is triggered byany one of the following:

l Forcing open a door, the hood or thetrunk lid/liftgate.

l Opening a door by operating an insidedoor-lock knob.

l Opening the hood by operating thehood release handle.

l Opening the trunk lid by operating thetrunk lid release lever.

If the system is triggered again, the lightsand horn will activate until a door or thetrunk lid is unlocked with the key or withthe transmitter.

qHow to Arm the System

1. Remove the key from the ignitionswitch.

2. Make sure the hood is closed. Closeand lock all doors and the liftgate/trunklid from the outside using the key. Ifyou have the keyless entry system,press the lock button on the transmitter.The hazard warning lights will flashonce to indicate that the system isarmed.

The following method will also arm thetheft-deterrent system:Close the hood and the liftgate/trunklid . Press the area on the door-lockswitch marked “LOCK” once. Close alldoors.

NOTE

Locking the doors with the inside door-lock knob will not arm the system.

qTo Turn off an Armed System

An armed system can be turned off by anyone of the following methods:

l Unlock a door or the trunk lid with thekey.

l Press the unlock button on the keylessentry system transmitter.

l Insert the key into the ignition switchand turn it to the ON position.

3-26

Knowing Your Mazda

íSome models.

Security System


Form No.8U55-EA-05G

Black plate (97,1)

qTo Stop an Alarm

A triggered alarm can be turned off byany one of the following methods:

l Unlock a door or the trunk lid with thekey.

l Press the unlock button on the keylessentry system transmitter.

NOTE

If you have any problem with the theft-deterrent system, consult an AuthorizedMazda Dealer.

qTheft-Deterrent Labels

A label indicating that your vehicle isequipped with a Theft-Deterrent System isin the glove box.

Mazda recommends that you affix it to thelower rear corner of a front door window.

Knowing Your Mazda

Security System

3-27


Form No.8U55-EA-05G

Black plate (98,1)

Steering Wheel

WARNINGAdjusting the Steering Wheel:Adjusting the steering wheel while thevehicle is moving is dangerous.Moving it can very easily cause thedriver to abruptly turn to the left orright. This can lead to loss of controlor an accident. Never adjust thesteering wheel while the vehicle ismoving.

qSteering Wheel Adjustment

To change the angle or length of thesteering wheel:

1. Stop the vehicle, pull down the lockrelease lever under the steeringcolumn.

Lock release lever

2. Tilt the steering wheel and/or adjust thesteering column length to the desiredpositions, push the lever up to lock thecolumn.

3. Push the wheel up and down to becertain it's locked before driving.

Mirrors

qOutside Mirrors

Check the mirror angles before driving.

Mirror type

Flat type (driver's side)Flat surface mirror.Convex type (front passenger side)The mirror has single curvature on itssurface.

WARNINGConvex Mirror:Changing lanes without taking intoaccount the actual distance of thevehicle in the convex mirror isdangerous. You could have a seriousaccident. What you see in the convexmirror is closer than it appears. Besure to look over your shoulder beforechanging lanes.

Power control mirror

The ignition switch must be in the ACCor ON position.

To adjust:

1. Move the selector switch to the left orright to choose the left or right sidemirror.

3-28

Knowing Your Mazda

Steering Wheel and Mirrors


Form No.8U55-EA-05G

Black plate (99,1)

2. Depress the mirror switch in theappropriate direction.

Mirror switch

Outside mirrorSelector switch

After adjusting the mirror, lock the controlby moving the selector switch to themiddle position.

Manual control mirror

To adjust, move the mirror's control lever,just inside the door.

Control lever

Folding the mirror

Fold the outside mirror rearward until it isflush with the vehicle.

WARNINGDriving with Mirrors Folded In:Driving with the outside mirrorsfolded in is dangerous. Your rear viewwill be restricted, and you could havean accident. Always return the outsidemirrors to the driving position beforeyou start driving.

Mirror defrosterí

To turn on the mirror defrosters, turn theignition switch to the ON position andpush the rear window defroster switch(page 5-54).

Knowing Your Mazda


3-29íSome models.


Form No.8U55-EA-05G

Black plate (100,1)

qRearview Mirror

Rearview mirror adjustment

Before driving, adjust the rearview mirrorto center on the scene through the rearwindow.

Reducing glare from headlights

Do this with the day/night lever in the dayposition.

Push the lever forward for day driving.Pull it back to reduce glare fromheadlights.

Night

Day

Day/Night lever

WARNINGBlocked View:Cargo stacked higher than theseatbacks is dangerous. It can blockyour view in the rearview mirror,which might cause you to hit anothercar when changing lanes. Don't stackthings higher than the seatbacks.

3-30

Knowing Your Mazda



Form No.8U55-EA-05G

Black plate (101,1)

4 Before Driving Your Mazda

Important information about driving your Mazda.

Fuel and Engine Exhaust Precautions ........................................ 4-2Fuel Requirements .................................................................... 4-2Emission Control System .......................................................... 4-3Engine Exhaust (Carbon Monoxide) ......................................... 4-5

Before Starting the Engine ........................................................... 4-6Before Getting In ...................................................................... 4-6After Getting In ......................................................................... 4-6

Driving Tips ................................................................................... 4-7Break-In Period ......................................................................... 4-7Money-Saving Suggestions ...................................................... 4-7Hazardous Driving .................................................................... 4-8Rocking the Vehicle .................................................................. 4-9Winter Driving .......................................................................... 4-9Driving In Flooded Area ......................................................... 4-11Overloading ............................................................................ 4-12

Towing ......................................................................................... 4-13Trailer Towing ......................................................................... 4-13

4-1


Form No.8U55-EA-05G

Black plate (102,1)

Fuel RequirementsVehicles with catalytic converters or oxygen sensors must use ONLY UNLEADED FUEL,which will reduce exhaust emissions and keep spark plug fouling to a minimum.

Your Mazda will perform best with fuel listed in the table.

Fuel Octane Rating*(Anti-knock index)

Regular unleaded fuel 87 [ (R+M)/2 method] or above (91 RON or above)

* U.S. federal law requires that octane ratings be posted on gasoline station pumps.

Fuel with a rating lower than 87 octane (91 RON) could cause the emission control systemto lose effectiveness. It could also cause engine knocking and serious engine damage.

CAUTIONl USE ONLY UNLEADED FUEL.Leaded fuel is harmful to the catalytic converter or the oxygen sensor. The lead willaccumulate on the oxygen sensor and the catalyst inside the converter. This will resultin a malfunction of the emission control system, causing poor performance.

l Your vehicle can only use oxygenated fuels containing no more than 10% ethanol byvolume. Damage to your vehicle may occur when ethanol exceeds thisrecommendation, or if the gasoline contains any methanol. Stop using gasohol of anykind if your vehicle engine is performing poorly.

l Never add fuel system additives. Never add cleaning agents other than those specifiedby Mazda. Other cleaning agents and additives may damage the system. Consult anAuthorized Mazda Dealer.

Gasoline blended with oxygenates such as alcohol or ether compounds are generallyreferred to as oxygenated fuels. The common gasoline blend that can be used with yourvehicle is ethanol blended at no more than 10%. Gasoline containing alcohol, such asethanol or methanol, may be marketed under the name “Gasohol”.

Vehicle damage and drivability problems resulting from the use of the following may notbe covered by the Mazda warranty.

l Gasohol containing more than 10% ethanol.

l Gasoline or gasohol containing methanol.

l Leaded fuel or leaded gasohol.

4-2

Before Driving Your Mazda

Fuel and Engine Exhaust Precautions


Form No.8U55-EA-05G

Black plate (103,1)

Emission Control SystemYour vehicle is equipped with an emission control system (the catalytic converter is part ofthis system) that enables your vehicle to comply with existing exhaust emissionsrequirements.

WARNINGParking Over Flammable Objects:Parking over or near anything flammable, such as dry grass, is dangerous. Even withthe engine turned off, the exhaust system could ignite it because the exhaust systemgets very hot during normal use. A resulting fire could cause serious injury or death.Never park over or near anything flammable.

CAUTIONIgnoring the following precautions could cause lead to accumulate on the catalyst insidethe converter or cause the converter to get very hot. Either condition will damage theconverter and cause poor performance.

l USE ONLY UNLEADED FUEL.

l Don't drive your Mazda with any sign of engine malfunction.

l Don't coast with the ignition switch turned off.

l Don't descend steep grades in gear with the ignition switch turned off.

l Don't operate the engine at high idle for more than 5 minutes.

l Don't tamper with the emission control system. All inspections and adjustments mustbe made by a qualified technician.

l Don't push-start or pull-start your vehicle.

NOTE

Under U.S. federal law, any modification to the original-equipment emission controlsystem before the first sale and registration of a vehicle is subject to penalties. In somestates, such modification made on a used vehicle is also subject to penalties.



4-3


Form No.8U55-EA-05G

Black plate (104,1)

NOTE

While the engine is off, the sound of a valve opening and closing can be heard at the rearof the right side of the vehicle, however this does not indicate an abnormality. Yourvehicle has a self-checking device and it operates while the engine is off.

4-4




Form No.8U55-EA-05G

Black plate (105,1)

Engine Exhaust (Carbon Monoxide)

WARNINGCarbon Monoxide:Engine exhaust gas is dangerous. This gas contains carbon monoxide (CO), which iscolorless, odorless, and poisonous. When inhaled, it can cause loss of consciousnessand death. If you smell exhaust gas inside your vehicle, keep all windows fully openand contact an Authorized Mazda Dealer immediately.

Exhaust Gas in Enclosed Area:Running the engine inside an enclosed area, such as a garage, is dangerous. Exhaustgas, which contains poisonous carbon monoxide, could easily enter the cabin. Loss ofconsciousness or even death could occur. Don't run the engine when inside anenclosed area.

Idling with the Windows Closed:Exhaust gas is dangerous. When your vehicle is stopped with the windows closed andthe engine running for a long time even in an open area, exhaust gas, which containspoisonous carbon monoxide, could enter the cabin. Loss of consciousness or evendeath could occur. Open the windows or adjust the heating or cooling system to drawfresh air.

Snow Blocking the Exhaust Gas:Running the engine when a vehicle is stopped in deep snow is dangerous. The exhaustpipe could be blocked by the snow, allowing exhaust gas to enter the cabin. Becauseexhaust gas contains poisonous carbon monoxide, anyone in the cabin could beinjured or killed. Clear the snow from underneath and around your vehicle,particularly the tail pipe, before starting the engine.



4-5


Form No.8U55-EA-05G

Black plate (106,1)

Before Getting Inl Be sure the windows, outside mirrors,and outside lights are clean.

l Inspect inflation pressures andcondition of tires.

l Look under the vehicle for any sign ofa leak.

l If you plan to back up, make surenothing is in your way.

NOTE

Engine oil, engine coolant, brake/clutchfluid, washer fluid, and other fluidlevels should be inspected. SeeMaintenance, Section 8.

After Getting Inl Are all doors closed and locked?

l Is the seat adjusted properly?

l Are the inside and outside mirrorsadjusted?

l Is everyone's seat belt fastened?

l Check all gauges.

l Check all warning lights when theignition switch is turned to the ONposition.

l Release the parking brake and makesure the brake warning light goes off.

Always be thoroughly familiar with yourMazda.

4-6


Before Starting the Engine


Form No.8U55-EA-05G

Black plate (107,1)

Break-In PeriodNo special break-in is necessary, but a fewprecautions in the first 1,000 km (600miles) may add to the performance,economy, and life of your Mazda.

l Don't race the engine.

l Don't maintain one constant speed,either slow or fast, for a long period oftime.

l Don't drive constantly at full-throttle orhigh engine rpm for extended periodsof time.

l Avoid unnecessary hard stops.

l Avoid full-throttle starts.

Money-Saving SuggestionsHow you operate your Mazda determineshow far it will travel on a tank of fuel. Usethese suggestions to help save money onfuel and repairs.

l Avoid long warm-ups. Once the engineruns smoothly, begin driving.

l Avoid fast starts.

l Keep the engine tuned. Follow themaintenance schedule (page 8-3) andhave an Authorized Mazda Dealerperform inspections and servicing.

l Use the air conditioner only whennecessary.

l Slow down on rough roads.

l Keep the tires properly inflated.

l Don't carry unnecessary weight.

l Don't rest your foot on the brake pedalwhile driving.

l Keep the wheels in correct alignment.

l Keep windows closed at high speeds.

l Slow down when driving in crosswindsand headwinds.

WARNINGCoasting:Stopping the engine when going downa hill is dangerous. This causes theloss of power steering and powerbrake control, and may cause damageto the drivetrain. Any loss of steeringor braking control could cause anaccident. Never stop the engine whengoing down a hill.


Driving Tips

4-7


Form No.8U55-EA-05G

Black plate (108,1)

Hazardous Driving

WARNINGDownshifting on Slippery Surfaces:Downshifting into lower gear whiledriving on slippery surfaces isdangerous. The sudden change in tirespeed could cause the tires to skid.This could lead to loss of vehiclecontrol and an accident. If it isnecessary to downshift on slipperysurfaces, be very careful.

ABS:The ABS cannot compensate forunsafe and reckless driving, excessivespeed, tailgating (following anothervehicle too closely), driving on ice andsnow, and hydroplaning (reduced tirefriction and road contact because ofwater on the road surface). You canstill have an accident. So don't rely onABS as a substitute for safe driving.

When driving on ice or in water, snow,mud, sand, or similar hazard:

l Be cautious and allow extra distancefor braking.

l Avoid sudden braking and quicksteering.

l If your vehicle is not equipped withABS, brake with the pedal by using alight up-down motion. Don't hold thepedal down constantly.If your vehicle is equipped with ABS,don't pump the brakes. Continue topress down on the brake pedal.

l If you get stuck, select a lower gear andaccelerate slowly. Don't spin the frontwheels.

l For more traction in starting onslippery surfaces such as ice or packedsnow, use sand, rock salt, chains,carpeting, or other nonslip materialunder the front wheels.

NOTE

Use snow chains only on the frontwheels.

4-8


Driving Tips


Form No.8U55-EA-05G

Black plate (109,1)

Rocking the Vehicle

WARNINGSpinning the Wheels:When the vehicle is stuck, spinningthe wheels at high speed is dangerous.The spinning tire could overheat andexplode. This could cause seriousinjuries. Don't spin the wheels at morethan 56 km/h (35 mph), and don'tallow anyone to stand behind a wheelwhen pushing the vehicle.

CAUTIONToo much rocking may cause engineoverheating, transaxle failure, and tiredamage.

If you must rock the vehicle to free it fromsnow, sand or mud, depress theaccelerator slightly and slowly move theshift lever from 1 (D) to R.

Winter Drivingl Carry emergency gear, including tirechains, window scraper, flares, a smallshovel, jumper cables, and a small bagof sand or salt.

Ask an Authorized Mazda Dealer toperform the following precautions:

l Have the proper ratio of antifreeze inthe radiator.Refer to Engine Coolant on page 8-21.

l Inspect the battery and its cables. Coldreduces battery capacity.

l Inspect the ignition system for damageand loose connections.

l Use washer fluid made withantifreeze―but don't use enginecoolant antifreeze for washer fluid(page 8-27).

l Don't use the parking brake in freezingweather as the parking brake mayfreeze. Instead, shift to P with anautomatic transaxle and to 1 or R witha manual transaxle. Block the rearwheels.


Driving Tips

4-9


Form No.8U55-EA-05G

Black plate (110,1)

qSnow Tires

Use snow tires on all four wheels

Don't go faster than 120 km/h (75 mph)while driving with snow tires. Inflatesnow tires 30 kPa (0.3 kgf/cm2, 4.3 psi)more than recommended on the tirepressure label (driver's door frame), butnever more than the maximum cold-tirepressure shown on the tires.Your vehicle is originally equipped withall season radials designed to be used allyear around. In some extreme climatesyou may find it necessary to replace themwith snow tires during the winter monthsto further improve traction on snow andice covered roads.

WARNINGMixing Tire Types:Using tires different in size or type isdangerous. Your vehicle's handlingcould be greatly affected and result inan accident. Use only the same sizeand type tires (snow, radial, or non-radial) on all four wheels.

CAUTIONCheck local regulations before usingstudded tires.

NOTE

If your vehicle is equipped with the tirepressure monitoring system, the systemmay not function correctly when usingtires with steel wire reinforcement inthe sidewalls (page 5-25).

qTire Chains

Check local regulations before using tirechains.

CAUTIONl Chains may scratch or chipaluminum wheels. Install tire chainson steel wheels only.

l Chains may affect handling.

l Don't go faster than 50 km/h (30mph) or the chain manufacturer'srecommended limit, whichever islower.

l Drive carefully and avoid bumps,holes, and sharp turns.

l Avoid locked-wheel braking.

l Don't use chains on a temporaryspare tire; it may result in damage tothe vehicle and to the tire.

l Don't use chains on roads that arefree of snow or ice. The tires andchains could be damaged.

NOTE

If your vehicle is equipped with the tirepressure monitoring system, the systemmay not function correctly when usingtire chains.

Install the chains on the front tires.Don't use chains on the rear tires.Use only SAE Class “S” chains, and makesure they fit.

4-10


Driving Tips


Form No.8U55-EA-05G

Black plate (111,1)

Installing the chains

1. Secure the chains on the front tires astightly as possible. Always follow thechain manufacturer's instructions.

2. Retighten the chains after driving 1/2―1 km (1/4―1/2 mile).

Driving In Flooded Area

WARNINGDriving with Wet Brakes:Driving with wet brakes is dangerous.Increased stopping distance or thevehicle pulling to one side whenbraking could result in a seriousaccident. Light braking will indicatewhether the brakes have been affected.Dry the brakes by driving very slowlyand applying the brakes lightly untilbrake performance returns to normal.

CAUTIONMake sure water does not enter thevehicle interior or the engine area.Interior materials could get moldy, andmany electronic devices in the cabinand the engine could be damaged.


Driving Tips

4-11


Form No.8U55-EA-05G

Black plate (112,1)

Overloading

WARNINGVehicle Load Weight:The gross axle weight rating (GAWR)and the gross vehicle weight rating(GVWR) of your vehicle are on theMotor Vehicle Safety Standard Labelon the driver's door frame. Exceedingthese ratings can cause an accident orvehicle damage. You can estimate theweight of your load by weighing theitems (or people) before putting themin the vehicle. Be careful not tooverload your vehicle.

4-12


Driving Tips


Form No.8U55-EA-05G

Black plate (113,1)

Trailer TowingThe Mazda3 is not designed for towing.Never tow a trailer with your Mazda3.


Towing

4-13


Form No.8U55-EA-05G

Black plate (114,1)

4-14


Form No.8U55-EA-05G

Black plate (115,1)

5 Driving Your Mazda

Explanation of instruments and controls.

Starting and Driving ..................................................................... 5-2Ignition Switch .......................................................................... 5-2Starting the Engine .................................................................... 5-3Brake System ............................................................................ 5-4Manual Transaxle Operation ..................................................... 5-9Automatic Transaxle Controls ................................................. 5-11Power Steering ........................................................................ 5-17Cruise Controlí ...................................................................... 5-18Tire Pressure Monitoring Systemí ......................................... 5-22

Instrument Cluster and Indicators ............................................ 5-28Meters and Gauges .................................................................. 5-28

Warning/Indicator Lights and Beep Sounds ............................ 5-33Warning/Indicator Lights ........................................................ 5-33Beep Sounds ........................................................................... 5-44

Switches and Controls ................................................................ 5-46Lighting Control ..................................................................... 5-46Turn and Lane-Change Signals ............................................... 5-49Fog Lightsí ............................................................................ 5-49Windshield Wipers and Washer .............................................. 5-50Rear Window Wiper and Washer (5 Door) ............................. 5-53Rear Window Defroster ........................................................... 5-54Horn ........................................................................................ 5-55Hazard Warning Flasher .......................................................... 5-55

5-1íSome models.


Form No.8U55-EA-05G

Black plate (116,1)

Ignition Switch

qIgnition Switch Positions

LOCK

The steering wheel locks to protectagainst theft. Only in this position can thekey be removed.To turn the key from the ACC to theLOCK position, push the button when thekey is at the ACC position, then turn thekey to the LOCK position.

ButtonPush the button

Automatic transaxle

To turn the key from the ACC to theLOCK position, the shift lever must be inthe P position.

Shift lever engaged in P (park)

WARNINGRemoving the Key:It's dangerous to remove the key fromthe ignition switch while the vehicle ismoving. Removing the key allows thesteering wheel to lock. You will losesteering control and a serious accidentcould occur.Remove the key only when the vehicleis parked.

Not Setting the Parking Brake:Leaving the driver's seat withoutsetting the parking brake isdangerous. Unexpected vehiclemovement could occur if the parkingbrake is not set. This could cause anaccident. Before leaving the driver'sseat, always set the parking brake andmake sure the shift lever is in P withan automatic transaxle or in 1 or Rwith a manual transaxle.

5-2

Driving Your Mazda

Starting and Driving


Form No.8U55-EA-05G

Black plate (117,1)

NOTE

If turning the key is difficult, jiggle thesteering wheel from side to side.

ACC (Accessory)

The steering wheel unlocks and someelectrical accessories will operate.

ON

This is the normal running position afterthe engine is started. The warning lights(except brakes) should be inspectedbefore the engine is started (page 5-33).

NOTE

When the ignition switch is turned tothe ON position, the sound of the fuelpump motor operating near the fueltank can be heard. This does notindicate an abnormality.

START

The engine is started in this position. Itwill crank until you release the key; thenit returns to the ON position. The brakewarning light can be checked after theengine is started (page 5-33).

qIgnition Key Reminder

If the ignition switch is in the LOCK orACC position with the key inserted, acontinuous beep sound will be heardwhen the driver's door is opened.

Starting the Engine

NOTE

Engine-starting is controlled by thespark ignition system.This system meets all CanadianInterference-Causing EquipmentStandard requirements regulating theimpulse electrical field strength of radionoise.

1. Occupants should fasten their seatbelts.

2. Make sure the parking brake is on.

3. Depress the brake pedal.

4. (Manual transaxle)Depress the clutch pedal all the wayand shift into neutral.Keep the clutch pedal depressed whilecranking the engine.

(Automatic transaxle)Put the vehicle in park (P). If you mustrestart the engine while the vehicle ismoving, shift into neutral (N).

NOTE

(Manual transaxle)The starter will not operate if the clutchpedal is not depressed all the way.

(Automatic transaxle)The starter will not operate if the shiftlever is not in P or N.

5. Turn the ignition switch to the STARTposition and hold (up to 10 seconds ata time) until the engine starts.

Driving Your Mazda


5-3


Form No.8U55-EA-05G

Black plate (118,1)

CAUTIONDon't try the starter for more than 10seconds at a time. If the engine stalls orfails to start, wait 10 seconds beforetrying again. Otherwise, you maydamage the starter and drain the battery.

6. After starting the engine, let it idle forabout 10 seconds.

NOTE

l In extremely cold weather, below_18 °C (0 °F), or after the vehiclehas not been driven in several days,let the engine warm up withoutoperating the accelerator.

l Whether the engine is cold or warm,it should be started without use ofthe accelerator.

Brake System

qFoot Brake

Your Mazda has power-assisted brakesthat adjust automatically through normaluse.

Should power-assist fail, you can stop byapplying greater force than normal to thebrake pedal. But the distance required tostop will be greater than usual.

WARNINGCoasting with the Engine Off:Continuing to coast when the engineis stalled or turned off is dangerous.Braking will require more effort, andthe brake's power-assist could bedepleted if you pump the brake. Thiswill cause longer stopping distances oreven an accident. Don't continuecoasting when the engine is stalled orturned off, find a safe place to stop.

Riding the Brakes:Driving with your foot continuouslyon the brake pedal or steadily applyingthe brakes for long distances isdangerous. This causes overheatedbrakes, resulting in longer stoppingdistances or even total brake failure.This could cause loss of vehiclecontrol and a serious accident. Avoidcontinuous application of the brakes.Shift to a lower gear when going downsteep hills.

5-4

Driving Your Mazda



Form No.8U55-EA-05G

Black plate (119,1)

WARNINGDriving with Wet Brakes:Driving with wet brakes is dangerous.Increased stopping distance or thevehicle pulling to one side whenbraking could result in a seriousaccident. Light braking will indicatewhether the brakes have been affected.Dry the brakes by driving very slowlyand applying the brakes lightly untilbrake performance is normal.

qParking Brake

WARNINGNot Setting the Parking Brake:Leaving the driver's seat withoutsetting the parking brake isdangerous. Unexpected vehiclemovement could occur if the parkingbrake is not set. This could cause anaccident. Before leaving the driver'sseat, always set the parking brake andmake sure the shift lever is in P withan automatic transaxle or in 1 or Rwith a manual transaxle.

CAUTIONDriving with the parking brake on willcause excessive wear of the brakelinings or pads.

NOTE

For parking in snow, refer to WinterDriving (page 4-9) regarding parkingbrake use.

Setting the parking brake

Depress the brake pedal and then firmlypull the parking brake lever fully upwardswith a greater amount of force than isrequired so that the vehicle holds in thestationary position.

Releasing the parking brake

Depress the brake pedal and pull theparking brake lever upwards, then pressthe release button. While holding thebutton, lower the parking brake lever allthe way down to the released position.

Driving Your Mazda


5-5


Form No.8U55-EA-05G

Black plate (120,1)

qBrake System Warning Light

This warning has the following functions:

Parking brake warning

The light comes on when the parkingbrake is applied with the ignition switchin the START or ON position. It goes offwhen the parking brake is fully released.

Low brake fluid level warning

If the light stays on after the parking brakeis fully released, you may have a brakeproblem.

Drive to the side of the road and park offthe right-of-way.

You may notice that the pedal is harder topush or that it may go closer to the floor.In either case, it will take longer to stopthe vehicle.

1. With the engine stopped, check thebrake fluid level immediately and addfluid as required (page 8-23).

2. After adding fluid, check the lightagain.

If the warning light remains on, or if thebrakes do not operate properly, do notdrive the vehicle. Have it towed to anAuthorized Mazda Dealer.

Even if the light goes out have your brakesystem inspected as soon as possible byan Authorized Mazda Dealer.

NOTE

Having to add brake fluid is sometimesan indicator of leakage. Consult anAuthorized Mazda Dealer as soon aspossible even if the brake light is nolonger illuminated.

WARNINGBrake Warning Light:Driving with the brake system warninglight on is dangerous. It indicates thatyour brakes may not work at all orthat they could completely fail at anytime. If this light remains on, afterchecking that the parking brake isfully released, have the brakesinspected immediately. Don't drivewith this light on, have the vehicletowed to an Authorized Mazda Dealerto have the brakes inspected as soonas possible.

qAnti-Lock Brake System (ABS)í

The ABS control unit continuouslymonitors the speed of each wheel. If oneis about to lock up, the ABS responds byautomatically releasing and reapplyingthat wheel's brake.

The driver will feel a slight vibration inthe brake pedal and may hear a chatteringnoise from the brake system. This isnormal when the ABS operates. Don'tpump the brakes, continue to press downon the brake pedal.

5-6

Driving Your Mazda

íSome models.



Form No.8U55-EA-05G

Black plate (121,1)

WARNINGABS:The ABS cannot compensate forunsafe and reckless driving, excessivespeed, tailgating (following anothervehicle too closely), driving on ice andsnow, and hydroplaning (reduced tirefriction and road contact because ofwater on the road surface). You canstill have an accident. So don't rely onABS as a substitute for safe driving.

NOTE

Braking distances may be longer onloose surfaces (snow or gravel, forexample) which usually have a hardfoundation. A vehicle with a normalbraking system may require lessdistance to stop under these conditionsbecause the tires will build up a wedgeof surface layer when the wheels skid.

qABS Warning Lightí

The warning light stays on for a fewseconds when the ignition switch is turnedto the ON position.

If the ABS warning light stays on whileyou're driving, the ABS control unit hasdetected a system malfunction. If thisoccurs, your brakes will function normallyas if the vehicle had no ABS.Should this happen, consult an AuthorizedMazda Dealer as soon as possible.

NOTE

When the engine is jump-started tocharge the battery, uneven rpm occursand the ABS warning light comes on.This is due to a weak battery, not amalfunction.Recharge the battery.

qElectronic Brake ForceDistribution System Warningí

If the electronic brake force distributioncontrol unit determines that somecomponents are operating incorrectly, thecontrol unit may turn the brake systemwarning light and the ABS warning lighton at the same time. The problem is likelyto be an electronic brake force distributionsystem.

Driving Your Mazda


5-7íSome models.


Form No.8U55-EA-05G

Black plate (122,1)

WARNINGABS Warning Light and BrakeWarning Light on at the Same Time:Driving when the brake systemwarning light and ABS warning lightare on at the same time is dangerous.When both lights are on, the rearwheels could lock more quickly in anemergency stop than under normalcircumstances.Don't drive with both lights on, havethe vehicle towed to an AuthorizedMazda Dealer to have the brakesinspected as soon as possible.

qBrake Assistí

During emergency braking situationswhen it is necessary to depress the brakepedal with greater force, the brake assistsystem provides braking assistance, thusenhancing braking performance.

When the brake pedal is depressed hard ordepressed more quickly, the brakes applymore firmly.

NOTE

l When the brake pedal is depressedhard or depressed more quickly, thepedal will feel softer but the brakeswill apply more firmly. This is anormal effect of the brake assistoperation and does not indicate anabnormality.

l When the brake pedal is depressedhard or depressed more quickly, aclicking noise from the brake boostermay be heard. This is a normal effectof the brake assist and does notindicate an abnormality.

l The brake assist equipment does notsupersede the functionality of thevehicle's main braking system.

5-8

Driving Your Mazda

íSome models.



Form No.8U55-EA-05G

Black plate (123,1)

Manual Transaxle Operation

qManual Transaxle Shift Pattern

Neutral position

The shift pattern of the transaxle isconventional, as shown.

Depress the clutch pedal all the way downwhile shifting; then release it slowly.

A safety feature prevents accidentalshifting from 5 to R (reverse). The shiftlever must be put in neutral before beingshifted to R.

WARNINGSudden Engine-Braking:Shifting down while driving on wet,snowy, or frozen roads, or whiledriving at high speeds causes suddenengine braking, which is dangerous.The sudden change in tire speed couldcause the tires to skid. This could leadto loss of vehicle control and anaccident. Do not use sudden enginebraking on slippery road surfaces or athigh speeds.

CAUTIONl Keep your foot off the clutch pedalexcept when shifting gears. Also,don't use the clutch to hold thevehicle on an upgrade. Riding theclutch will cause needless clutchwear and damage.

l Make sure the vehicle comes to acomplete stop before shifting to R.Shifting to R while the vehicle is stillmoving may damage the transaxle.

NOTE

If shifting to R is difficult, shift backinto neutral, release the clutch pedal,and try again.

qRecommendations for Shifting

Upshifting

For normal acceleration, we recommendthese shift points.

Gear Vehicle speed

1 to 2 21 km/h (13 mph)

2 to 3 39 km/h (24 mph)

3 to 4 55 km/h (34 mph)

4 to 5 78 km/h (49 mph)

For cruising

Gear Vehicle speed

1 to 2 18 km/h (11 mph)

2 to 3 29 km/h (18 mph)

3 to 4 47 km/h (29 mph)

4 to 5 68 km/h (42 mph)

Driving Your Mazda


5-9


Form No.8U55-EA-05G

Black plate (124,1)

Downshifting

When you must slow down in heavytraffic or on a steep upgrade, downshiftbefore the engine starts to overwork. Thisreduces the chance of stalling and givesbetter acceleration when you need morespeed.On a steep downgrade, downshiftinghelps maintain safe speed and prolongsbrake life.

5-10

Driving Your Mazda



Form No.8U55-EA-05G

Black plate (125,1)

Automatic Transaxle Controls

Indicates that you must depress the brake pedal to shift (The ignition switch must be in the ON position).

Indicates the shift lever can be shifted freely into any position.

Various Lockouts:

qTransaxle Ranges

The shift lever must be in P or N tooperate the starter.

P (Park)

P locks the transaxle and prevents thefront wheels from rotating.

WARNINGHolding the Vehicle with P:Only setting the shift lever to the Pposition without using the parkingbrake to hold the vehicle is dangerous.If P fails to hold, the vehicle couldmove and cause an accident. To holdthe vehicle, set the shift lever to P ANDset the parking brake.

CAUTIONl Shifting into P, N or R while thevehicle is moving can damage yourtransaxle.

l Shifting into a driving gear orreverse when the engine is runningfaster than idle can damage thetransaxle.

R (Reverse)

In position R, the vehicle moves onlybackward. You must be at a complete stopbefore shifting to or from R, except underrare circumstances as explained inRocking the Vehicle (page 4-9).

Driving Your Mazda


5-11


Form No.8U55-EA-05G

Black plate (126,1)

N (Neutral)

In N, the wheels and transaxle are notlocked. The vehicle will roll freely evenon the slightest incline unless the parkingbrake or brakes are on.

WARNINGShifting from N or P:It's dangerous to shift from N or Pinto a driving gear when the engine isrunning faster than idle. If this isdone, the vehicle could move suddenly,causing an accident or serious injury.If the engine is running faster thanidle, don't shift from N or P into adriving gear.

Shifting into N while Driving:Shifting into N while driving isdangerous. Engine braking cannot beapplied when decelerating whichcould lead to an accident or seriousinjury. Do not shift into N whendriving the vehicle.

CAUTIONDo not shift into N when driving thevehicle. Doing so can cause transaxledamage.

D (Drive)

D is the normal driving position. From astop, the transaxle will automatically shiftthrough a 4-gear/5-gear* sequence.

* 2.3-liter engine model

M (Manual)

M is the manual shift mode position.Gears can be shifted up or down byoperating the shift lever.Refer to Manual Shift Mode (page 5-13).

qShift-Lock System

The shift-lock system prevents shiftingout of P unless the brake pedal isdepressed.

To shift from P:

1. Depress and hold the brake pedal.

2. Start the engine.

3. Move the shift lever.

NOTE

l When the ignition switch is in theACC or LOCK position, the shiftlever cannot be shifted from P.

l To be sure the vehicle is in park, theignition key cannot be removedunless the shift lever is in P.

qShift-Lock Override

If the shift lever won't move from P usingthe proper shift procedure, continue tohold down the pedal.

1. Remove the shift-lock override coverwith a screwdriver.

5-12

Driving Your Mazda



Form No.8U55-EA-05G

Black plate (127,1)

2. Insert a screwdriver and push it down.

3. Move the shift lever.

4. Take the vehicle to an AuthorizedMazda Dealer to have the systemchecked.

qManual Shift Mode

This mode gives you the feel of driving amanual transaxle vehicle by operating theshift lever and allows you to controlengine rpm and torque to the front wheelsmuch like a manual transaxle when morecontrol is desired.

To change to manual shift mode, shift thelever from D to M.

To return to automatic shift mode, shiftthe lever from M to D.

NOTE

l If you change to manual shift modewhen the vehicle is stopped, the gearwill shift to M1.

l If you shift up once when the vehicleis stopped and the gear is at M1, thegear will shift to M2. M2 is helpfulfor starting on slippery surfaces.

l (2.3-liter engine model)If you change to manual shift modewithout depressing the acceleratorpedal when driving in D range, 5thgear, the gear will shift to M4.

Indicators

Shift position indicator

In manual shift mode, the “M” of the shiftposition indicator in the instrument panelilluminates.

Gear position indicator

The numeral for the selected gearilluminates.

Shift position indicator


Driving Your Mazda


5-13


Form No.8U55-EA-05G

Black plate (128,1)

NOTE

l If the gears cannot be shifted downwhen driving at higher speeds, thegear position indicator will flashtwice to signal that the gears cannotbe shifted down.

l If the automatic transaxle fluid (ATF)temperature becomes too high, thereis the possibility that the transaxlewill switch to automatic shift mode,canceling manual shift mode andturning off the gear position indicatorillumination. This is a normalfunction to protect the AT. After theATF temperature has decreased, thegear position indicator illuminationturns back on and driving in manualshift mode is restored.

Shifting

Manually Shifting up

(M1→M2→M3→M4→M5*)To shift up to a higher gear, tap the shiftlever back ( ) once.


NOTE

l When driving slowly, the gears maynot shift up depending on vehiclespeed.

l In manual shift mode, gears do notshift up automatically. Don't run theengine with the tachometer needle inthe RED ZONE. If the tachometerneedle enters the RED ZONE, youmay feel engine-braking because thefuel delivery will be stopped toprotect the engine. However, thisdoes not indicate an abnormality.

l When depressing the acceleratorfully, the transaxle will shift to alower gear, depending on vehiclespeed.

Manually Shifting down

(M5*→M4→M3→M2→M1)To shift down to a lower gear, tap the shiftlever forward ( ) once.


5-14

Driving Your Mazda



Form No.8U55-EA-05G

Black plate (129,1)

WARNINGSudden Engine-Braking:Shifting down while driving on wet,snowy, or frozen roads, or whiledriving at high speeds causes suddenengine braking, which is dangerous.The sudden change in tire speed couldcause the tires to skid. This could leadto loss of vehicle control and anaccident. Do not use sudden enginebraking on slippery road surfaces or athigh speeds.

NOTE

l When driving at high speeds, thegear may not shift down dependingon vehicle speed.

l During deceleration, the gear mayautomatically shift down dependingon vehicle speed.

l When depressing the acceleratorfully, the transaxle will shift to alower gear, depending on vehiclespeed.

Second gear fixed mode

When the shift lever is tapped back ( )while the vehicle is stopped or driven atthe following speeds, the transaxle is setin the second gear fixed mode.2.0-liter engine model:14 km/h (8 mph) or less2.3-liter engine model:20 km/h (12 mph) or less

The gear is fixed in second while in thismode for easier starting and driving onslippery roads. If the shift lever is tappedback ( ) or forward ( ) while in thesecond gear fixed mode, the mode will becanceled.

Shifting specification (2.0-liter enginemodel)

Shifting up

If the vehicle speed is lower than thespeed specified for each gear, the gearcannot be shifted up to a higher gear.

Gear Vehicle speed

M1→M2You can shift up to M2 whetherthe vehicle is stopped or moving.

M2→M3 20 km/h (12 mph)

M3→M4 40 km/h (24 mph)

Shifting down

If the vehicle speed is higher than thespeed specified for each gear, the gearcannot be shifted down to a lower gear.

Gear Vehicle speed

M4→M3 180 km/h (112 mph)

M3→M2 119 km/h (74 mph)

M2→M1 47 km/h (30 mph)

During deceleration, the gears shift downautomatically when speed is reduced tothe following:

Gear Vehicle speed

M4→M3 36 km/h (22 mph)

M3 or M2→M1 12 km/h (7 mph)

NOTE

The gear does not shift down to M1automatically while in the second gearfixed mode.

Driving Your Mazda


5-15


Form No.8U55-EA-05G

Black plate (130,1)

If the vehicle is kicked down at thefollowing speeds or lower, the gears shiftdown automatically:

Gear Vehicle speed

M4→M3 170 km/h (105 mph)

M3→M2 72 km/h (44 mph)

Shifting specification (2.3-liter enginemodel)

Shifting up

If the vehicle speed is lower than thespeed specified for each gear, the gearcannot be shifted up to a higher gear.

Gear Vehicle speed

M1→M2You can shift up to M2 whetherthe vehicle is stopped or moving.

M2→M3 20 km/h (12 mph)

M3 or M4→M5 33 km/h (20 mph)

Shifting down

If the vehicle speed is higher than thespeed specified for each gear, the gearcannot be shifted down to a lower gear.

Gear Vehicle speed

M5→M4 191 km/h (118 mph)

M4→M3 137 km/h (85 mph)

M3→M2 89 km/h (55 mph)

M2→M1 44 km/h (27 mph)

During deceleration, the gears shift downautomatically when speed is reduced tothe following:

Gear Vehicle speed

M5 or M4→M3 30 km/h (18 mph)

M3 or M2→M1 10 km/h (6 mph)

NOTE

The gear does not shift down to M1automatically while in the second gearfixed mode.

If the vehicle is kicked down at thefollowing speeds or lower, the gears shiftdown automatically:

Gear Vehicle speed

M5→M4 182 km/h (113 mph)

M4→M3 133 km/h (82 mph)

M3→M2 48 km/h (30 mph)

M2→M1 12 km/h (7 mph)

Recommendations for shifting

Upshifting

For normal acceleration and cruising, werecommend these shift points.(2.0-liter engine model)

Gear Vehicle speed

M1 to M2 24 km/h (15 mph)



(2.3-liter engine model)

Gear Vehicle speed





Downshifting

When you must slow down in heavytraffic or on a steep upgrade, downshiftbefore the engine starts to overwork. Thisgives better acceleration when you needmore speed.

On a steep downgrade, downshiftinghelps maintain safe speed and prolongsbrake life.

5-16

Driving Your Mazda



Form No.8U55-EA-05G

Black plate (131,1)

qDriving Tips

Passing

For extra power when passing anothervehicle or climbing steep grades, depressthe accelerator fully. The transaxle willshift to a lower gear, depending on vehiclespeed.

Climbing steep grades from a stop

To climb a steep grade from a stoppedposition:

1. Depress the brake pedal.

2. Shift to D or M1, depending on theload weight and grade steepness.

3. Release the brake pedal whilegradually accelerating.

Descending steep grades

When descending a steep grade, shift tolower gears, depending on load weightand grade steepness. Descend slowly,using the brakes only occasionally toprevent them from overheating.

Power SteeringPower steering is only operable when theengine is running. If the engine is off or ifthe power steering system is inoperable,you can still steer, but it requires morephysical effort.

If the steering feels rigid during normaldriving, consult an Authorized MazdaDealer.

CAUTIONNever hold the steering wheel to theextreme left or right for more than 5seconds with the engine running.This could damage the power steeringsystem.

qPower Steering MalfunctionIndicator Light

This indicator light illuminates when theignition switch is turned to the ONposition and goes off when the engine isstarted.

Driving Your Mazda


5-17


Form No.8U55-EA-05G

Black plate (132,1)

The light illuminates to indicate that thepower steering is inoperable. If the lightilluminates, turn off the engine and restartit.If the light does not illuminate afterrestarting the engine, this indicates thatthe power steering is restored and normalsteering is possible.If the light remains illuminated, the powersteering is still inoperable. Consult anAuthorized Mazda Dealer.

NOTE

The power steering system is inoperablewhen the power steering malfunctionindicator light illuminates. Steering ispossible, but requires more physicaleffort.

Cruise Controlí

With cruise control, you can set andautomatically maintain any speed of morethan about 30 km/h (19 mph).

WARNINGCruise Control Use:Using cruise control in the followingconditions could cause you to losecontrol of the vehicle:l Hilly terrainl Steep inclinesl Heavy or unsteady trafficl Slippery or winding roadsl Similar restrictions that requireinconsistent speed

Don't use cruise control in thesesituations.

qCruise Main Indicator Light

This light comes on when the ON/OFFswitch is pressed and the cruise controlsystem is activated.

5-18

Driving Your Mazda

íSome models.



Form No.8U55-EA-05G

Black plate (133,1)

qCruise Set Indicator Light

This light comes on when a cruising speedis set.

qActivation/Deactivation

To activate the system, press the ON/OFFswitch.The cruise main indicator lightilluminates.

To deactivate the system, press the switchagain.The cruise main indicator light turns off.

WARNINGCruise Main Switch:Leaving the ON/OFF switch on whennot using the cruise control isdangerous as it may be switched onaccidentally. This could result in lossof vehicle control. Keep the ON/OFFswitch off when cruise control is not inuse.

qTo Set Speed

1. Activate the cruise control system bypressing the ON/OFF switch.

2. Accelerate to the desired speed, whichmust be more than 30 km/h (19 mph).

3. Press the SET/COAST button andrelease it at the speed you want.Release the accelerator at the sametime.

Don't continue to hold in the button. Untilyou release it, speed will continue to drop(unless you continue to accelerate) andyou'll miss the desired speed.

Driving Your Mazda


5-19


Form No.8U55-EA-05G

Black plate (134,1)

NOTE

l The SET function can't be activateduntil about 2 seconds after the ON/OFF switch has been engaged.

l On a steep grade, the vehicle maymomentarily slow down going up orspeed up while going down.

qTo Increase Cruising Speed

Follow either of these procedures.

l Press the RES/ACCEL button and holdit. Your vehicle will accelerate.Release the button at the speed youwant.

Your vehicle has a tap-up feature thatallows you to increase your current speedin increments of 1.6 km/h (1 mph) by amomentary tap of the RES/ACCELbutton. Multiple taps will increase yourvehicle speed 1.6 km/h (1 mph) for eachtap.

l Accelerate to the desired speed.Press the SET/COAST button andrelease it immediately.

NOTE

Accelerate if you want to speed uptemporarily when the cruise control ison. Greater speed will not interfere withit or change the set speed.Take your foot off the accelerator toreturn to the set speed.

5-20

Driving Your Mazda



Form No.8U55-EA-05G

Black plate (135,1)

qTo Decrease Cruising Speed

Press the SET/COAST button and hold it.The vehicle will gradually slow.Release the button at the speed you want.

Your vehicle has a tap-down feature thatallows you to decrease your current speedin decrements of 1.6 km/h (1 mph) by amomentary tap of the SET/COASTbutton. Multiple taps will decrease yourvehicle speed 1.6 km/h (1 mph) for eachtap.

qTo Resume Cruising Speed atMore Than 30 km/h (19 mph)

If some other method besides the ON/OFF switch was used to cancel cruisingspeed and the system is still activated, themost recent set speed will automaticallyresume when the RES/ACCEL button ispressed.If vehicle speed is below 30 km/h (19mph), increase the vehicle speed up to 30km/h (19 mph) and press the RES/ACCEL button.

qTo Cancel

To turn off the system, use one of thesemethods:

l Press the ON/OFF switch.

l Slightly depress the brake pedal.

l Depress the clutch pedal (Manualtransaxle only).

Driving Your Mazda


5-21


Form No.8U55-EA-05G

Black plate (136,1)

l Press the CANCEL button.

The system is off when the ignition is off.

NOTE

Cruise control will cancel at about 15km/h (9 mph) below the preset speed orbelow 30 km/h (19 mph).

Tire Pressure MonitoringSystemí

The tire pressure monitoring system(TPMS) monitors the pressure for eachtire.If tire pressure is too low in one or moretires, the system will inform the driver viathe warning light in the instrument paneland by the warning beep sound.

The tire pressure sensors installed on eachwheel send tire pressure data by radiosignal to the receiver unit in the vehicle.

Tire pressure sensors

NOTE

When the ambient temperature is lowdue to seasonal changes, tiretemperatures are also lower. If the tiretemperature lowers, the air pressurelowers as well, and the TPMS warninglight illuminates more frequently.Inspect the tire pressure daily beforedriving, and check the tire pressuresmonthly with a tire pressure gauge.When checking the tire pressures, useof a digital tire pressure gauge isrecommended.

5-22

Driving Your Mazda

íSome models.



Form No.8U55-EA-05G

Black plate (137,1)

TPMS does not alleviate your need tocheck the pressure and condition of allfour tires before you drive each day.

CAUTIONl Each tire, including the spare (ifprovided), should be checkedmonthly when cold and inflated tothe inflation pressure recommendedby the vehicle manufacturer on thevehicle placard or tire inflationpressure label. (If your vehicle hastires of a different size than the sizeindicated on the vehicle placard ortire inflation pressure label, youshould determine the proper tireinflation pressure for those tires.)As an added safety feature, yourvehicle has been equipped with a tirepressure monitoring system (TPMS)that illuminates a low tire pressuretelltale when one or more of yourtires is significantly under-inflated.Accordingly, when the low tirepressure telltale illuminates, youshould stop and check your tires assoon as possible, and inflate them tothe proper pressure. Driving on asignificantly under-inflated tirecauses the tire to overheat and canlead to tire failure. Under-inflationalso reduces fuel efficiency and tiretread life, and may affect thevehicle's handling and stoppingability.Please note that the TPMS is not asubstitute for proper tiremaintenance, and it is the driver'sresponsibility to maintain correct tirepressure, even if under-inflation hasnot reached the level to triggerillumination of the TPMS low tirepressure telltale.

CAUTIONl To avoid false readings, the systemsamples for a little while beforeindicating a problem. As a result itwill not instantaneously register arapid tire deflation or blow out.

NOTE

This device complies with part 15 of theFCC Rules. Operation is subject to thefollowing two conditions: (1) Thisdevice may not cause harmfulinterference, and (2) this device mustaccept any interference received,including interference that may causeundesired operation.

qTire Pressure Monitoring SystemWarning Light

This warning light illuminates for a fewseconds when the ignition switch is turnedto the ON position.

Thereafter, the warning light illuminateswhen tire pressure is too low in one ormore tires, and flashes when there is asystem malfunction.

Driving Your Mazda


5-23


Form No.8U55-EA-05G

Black plate (138,1)

WARNINGVehicle Handling When Tire PressureMonitoring System Warning LightIlluminates/Flashes:When the tire pressure monitoringsystem warning light illuminates orflashes, or the tire pressure warningbeep sound is heard, it is dangerous todrive the vehicle at high speeds, orperform sudden maneuvering orbraking. Vehicle drivability couldworsen and result in an accident.When the tire pressure monitoringsystem warning light illuminates orflashes, or the tire pressure warningbeep sound is heard, decrease vehiclespeed immediately and avoid suddenmaneuvering and braking. Have thesystem and tires checked or performthe appropriate repair as soon aspossible by an Authorized MazdaDealer.

Ignoring the Warning Light:Ignoring the warning light isdangerous, even if you know why it isilluminated. Have the problem takencare of as soon as possible before itdevelops into a more serious situationthat could lead to tire failure and adangerous accident.

Warning light illuminates/Warningbeep sounds

When the warning light illuminates, andthe warning beep sound is heard (about 3seconds), tire pressure is too low in one ormore tires.

Adjust the tire pressure to the correct tirepressure. Refer to the specification charts(page 10-7).

CAUTIONWhen replacing/repairing the tires orwheels or both, have the work done byan Authorized Mazda Dealer, or the tirepressure sensors may be damaged.

NOTE

l Perform tire pressure adjustmentwhen the tires are cold. Tire pressurewill vary according to the tiretemperature, therefore let the vehiclestand for 1 hour or only drive it 1.6km (1 mile) or less before adjustingthe tire pressures. When pressure isadjusted on hot tires to the coldinflation pressure, the TPMSwarning light/beep may turn on afterthe tires cool and pressure dropsbelow specification.Also, an illuminated TPMS warninglight, resulting from the tire airpressure dropping due to coldambient temperature, may go out ifthe ambient temperature rises. In thiscase, it will also be necessary toadjust the tire air pressures. If theTPMS warning light illuminates dueto a drop in tire air pressure, makesure to check and adjust the tire airpressures.

5-24

Driving Your Mazda



Form No.8U55-EA-05G

Black plate (139,1)

NOTE

l After adjusting the tire air pressures,it may require some time for theTPMS warning light to go out. If theTPMS warning light remainsilluminated, drive the vehicle at aspeed of at least 25 km/h (16 mph)for 10 minutes, and then verify that itgoes out.

If the warning light illuminates again evenafter the tire pressures are adjusted, theremay be a tire puncture. Replace thepunctured tire with the temporary sparetire (page 7-6).

NOTE

A tire pressure sensor is not installed tothe temporary spare tire. The warninglight will flash continuously while thetemporary spare tire is being used.

Warning light flashes

When the warning light flashes, there maybe a system malfunction. Consult anAuthorized Mazda Dealer.

qSystem Error Activation

When the warning light flashes, there maybe a system malfunction. Consult anAuthorized Mazda Dealer.A system error activation may occur inthe following cases:

l When there is equipment or a devicenear the vehicle using the same radiofrequency as that of the tire pressuresensors.

l When a large metallic object (e.g. alarge electric household appliance or adesk-top computer) is placed on theright side of the rear seat, which mayblock radio signals from the tirepressure sensor to the receiver unit.

l When using the following devices inthe vehicle that may cause radiointerference with the receiver unit.

l A digital device such as a personalcomputer.

l A current converter device such as aDC-AC converter.

l When excess snow or ice adheres tothe vehicle, especially around thewheels.

l When the tire pressure sensor batteriesare exhausted.

l When using a wheel with no tirepressure sensor installed.

l When using tires with steel wirereinforcement in the side walls.

l When using tire chains.

qTires and Wheels

CAUTIONWhen inspecting or adjusting the tire airpressures, do not apply excessive forceto the stem part of the wheel unit. Thestem part could be damaged.

Changing tires and wheels

The following procedure allows theTPMS to recognize a tire pressure sensor'sunique ID signal code whenever tires orwheels are changed, such as changing toand from winter tires.

Driving Your Mazda


5-25


Form No.8U55-EA-05G

Black plate (140,1)

NOTE

Each tire pressure sensor has a uniqueID signal code. The signal code must beregistered with the TPMS before it canwork. The easiest way to do it is to havean Authorized Mazda Dealer changeyour tire and complete ID signal coderegistration.

When having tires changed at anAuthorized Mazda Dealer

Tire pressure sensor ID signal coderegistration is completed when anAuthorized Mazda Dealer changes yourvehicle's tires.

When changing tires yourself

If you or someone else changes tires, youor someone else can also undertake thesteps for the TPMS to complete the IDsignal code registration.

1. After tires have been changed, turn theignition switch to the ON position, thenturn it back to the ACC or LOCKposition.

2. Wait for about 15 minutes.

3. After about 15 minutes, drive thevehicle at a speed of at least 25 km/h(16 mph) for 10 minutes and the tirepressure sensor ID signal code will beregistered automatically.

NOTE

If the vehicle is driven within about 15minutes of changing tires, the tirepressure monitoring system warninglight will flash because the sensor IDsignal code would not have beenregistered. If this happens, park thevehicle for about 15 minutes, afterwhich the sensor ID signal code willregister upon driving the vehicle for 10minutes.

Replacing tires and wheels

CAUTIONl When replacing/repairing the tires orwheels or both, have the work doneby an Authorized Mazda Dealer, orthe tire pressure sensors may bedamaged.

l The wheels equipped on your Mazdaare specially designed for installationof the tire pressure sensors. Do notuse non-genuine wheels, otherwise itmay not be possible to install the tirepressure sensors.

Be sure to have the tire pressure sensorsinstalled whenever tires or wheels arereplaced.When having a tire or wheel or bothreplaced, the following types of tirepressure sensor installation are possible.

l The tire pressure sensor is removedfrom the old wheel and installed to thenew one.

l The same tire pressure sensor is usedwith the same wheel. Only the tire isreplaced.

5-26

Driving Your Mazda



Form No.8U55-EA-05G

Black plate (141,1)

l A new tire pressure sensor is installedto a new wheel.

NOTE

l The tire pressure sensor ID signalcode must be registered when a newtire pressure sensor is purchased. Forpurchase of a tire pressure sensor andregistration of the tire pressuresensor ID signal code, consult anAuthorized Mazda Dealer.

l When reinstalling a previouslyremoved tire pressure sensor to awheel, replace the grommet for thetire pressure sensor.

Driving Your Mazda


5-27


Form No.8U55-EA-05G

Black plate (142,1)

Meters and Gauges(Black-out meter)When the ignition switch is in the ON position, the dashboard gauges illuminate.

Speedometer ...................................................................................................... page 5-29Odometer, Trip Meter and Trip Meter Selector .................................................. page 5-29Tachometer ........................................................................................................ page 5-31Engine Coolant Temperature Gauge .................................................................. page 5-31Fuel Gauge ........................................................................................................ page 5-31Instrument Cluster Dimmer Select Button (Black-out meter) ............................ page 5-32

5-28

Driving Your Mazda

Instrument Cluster and Indicators


Form No.8U55-EA-05G

Black plate (143,1)

qSpeedometer

The speedometer indicates the speed ofthe vehicle.

qOdometer, Trip Meter and TripMeter Selector

The display mode can be changedbetween trip meter A and trip meter B bypressing the selector while one of them isdisplayed. The selected mode will bedisplayed.

Selector

Trip meter

Odometer

Odometer

Odometer

Trip meter A

Press the selector

Press the selector

Trip meter B

Driving Your Mazda


5-29


Form No.8U55-EA-05G

Black plate (144,1)

NOTE

l (Standard meter)The odometer and trip meter can bedisplayed as follows even when theignition switch is in the ACC orLOCK position.

l Displays for 10 minutes after theignition switch is turned to theACC or LOCK position from theON position.

l Displays for 10 minutes after thedriver's door is opened.

l (Black-out meter)When the ignition switch is in theACC or LOCK position, theodometer or trip meters cannot bedisplayed, however, pressing theselector button can inadvertentlyswitch the trip meters or reset themduring an approximate ten-minuteperiod in the following cases:

l After the ignition switch is turnedto the ACC or LOCK positionfrom the ON position.

l After the driver's door is opened.

Odometer

The odometer records the total distancethe vehicle has been driven.

Trip meter

The trip meter can record the totaldistance of two trips. One is recorded intrip meter A, and the other is recorded intrip meter B.

For instance, trip meter A can record thedistance from the point of origin, and tripmeter B can record the distance fromwhere the fuel tank is filled.

When trip meter A is selected, pressingthe selector again within one second willchange to trip meter B mode.

When trip meter A is selected, TRIPAwill be displayed. When trip meter B isselected, TRIP B will be displayed.

The trip meter records the total distancethe vehicle is driven until the meter isagain reset. Return it to “0.0” by holdingthe selector depressed for more than 1second. Use this meter to measure tripdistances and to compute fuelconsumption.

NOTE

l Only the trip meters record tenths ofkilometers (miles).

l The trip record will be erased when:

l The power supply is interrupted(blown fuse or the battery isdisconnected).

l The vehicle is driven over 999.9km (mile).

5-30

Driving Your Mazda



Form No.8U55-EA-05G

Black plate (145,1)

qTachometer

The tachometer shows engine speed inthousands of revolutions per minute(rpm).

Red zone

CAUTIONDon't run the engine with thetachometer needle in the RED ZONE.This may cause severe engine damage.

qEngine Coolant Temperature Gauge

The engine coolant temperature gaugeshows the temperature of the enginecoolant.

If the needle is near H, it indicatesoverheating.

CAUTIONDriving with an overheated engine cancause serious engine damage (page7-12).

qFuel Gauge

The fuel gauge shows approximately howmuch fuel is in the tank. We recommendkeeping the tank over 1/4 full. When thelow fuel warning light illuminates orwhen the needle is near E, refuel as soonas possible.

Low fuel warning light

NOTE

The direction of the arrow ( ) shownnext to the low fuel warning lightindicates that the fuel-filler lid is on theright side of the vehicle.

Driving Your Mazda


5-31


Form No.8U55-EA-05G

Black plate (146,1)

qDashboard Illumination

When the exterior lights are on, rotate thethumb-wheel to adjust the brightness ofthe dashboard lights.

Bright

Dim

NOTE

Black-out meterWhen the instrument cluster dimmer iscanceled, the instrument clusterillumination intensity will not changeby rotating the thumb-wheel.

qInstrument Cluster DimmerSelect Button (Black-out meter)

The instrument cluster dimmer selectbutton is operable when the ignitionswitch is in the ON position.

Instrument cluster dimmer select button

Adjusting the instrument clusterillumination intensity (With exteriorlights off)

When the exterior lights are off, theinstrument cluster illumination can beadjusted to one of five levels bysuccessively pressing the instrumentcluster dimmer select button.

Canceling the instrument clusterillumination dimmer (With exteriorlights on)

When the exterior lights are on, theinstrument cluster illumination dims.When driving on snowy or foggy roads,or in other situations when the instrumentcluster's visibility is reduced due to glarefrom surrounding brightness, theinstrument cluster dimmer select buttonincreases the illumination intensity.Press the button to increase the intensityof the instrument cluster illumination.Press the button again to return to theprevious illumination intensity.

5-32

Driving Your Mazda



Form No.8U55-EA-05G

Black plate (147,1)

Warning/Indicator Lights

Warning/Indicator lights will appear in any of the highlighted areas

Signal Warning/Indicator Lights Page

Brake System Warning Light 5-35

Charging System Warning Light 5-36

Engine Oil Pressure Warning Light 5-37

Check Engine Light 5-37

ABS Warning Light 5-35

Air Bag/Front Seat Belt Pretensioner System Warning Light 5-38

Low Fuel Warning Light 5-38

Driving Your Mazda

Warning/Indicator Lights and Beep Sounds

5-33


Form No.8U55-EA-05G

Black plate (148,1)

Signal Warning/Indicator Lights Page

Seat Belt Warning Light/Beep 5-38

Door-Ajar Warning Light 5-39

Low Washer Fluid Level Warning Light 5-40

Automatic Transaxle Warning Light 5-40

Tire Pressure Monitoring System Warning Light 5-40

Security Indicator Light 5-42

Headlight High-Beam Indicator Light 5-42

Shift Position Indicator Light 5-42

Cruise Main Indicator Light 5-43

Cruise Set Indicator Light 5-43

Light-On Indicator Light 5-43

Power Steering Malfunction Indicator Light 5-43

Turn Signal/Hazard Warning Indicator Lights 5-44

5-34

Driving Your Mazda



Form No.8U55-EA-05G

Black plate (149,1)

qBrake System Warning Light

This warning has the following functions:

Parking brake warning

The light comes on when the parkingbrake is applied with the ignition switchin the START or ON position. It goes offwhen the parking brake is fully released.

Low brake fluid level warning

If the light stays on after the parking brakeis fully released, you may have a brakeproblem.

Drive to the side of the road and park offthe right-of-way.

You may notice that the pedal is harder topush or that it may go closer to the floor.In either case, it will take longer to stopthe vehicle.

1. With the engine stopped, check thebrake fluid level immediately and addfluid as required (page 8-23).

2. After adding fluid, check the lightagain.

If the warning light remains on, or if thebrakes do not operate properly, do notdrive the vehicle. Have it towed to anAuthorized Mazda Dealer.

Even if the light goes out have your brakesystem inspected as soon as possible byan Authorized Mazda Dealer.

NOTE

Having to add brake fluid is sometimesan indicator of leakage. Consult anAuthorized Mazda Dealer as soon aspossible even if the brake light is nolonger illuminated.

WARNINGBrake Warning Light:Driving with the brake system warninglight on is dangerous. It indicates thatyour brakes may not work at all orthat they could completely fail at anytime. If this light remains on, afterchecking that the parking brake isfully released, have the brakesinspected immediately. Don't drivewith this light on, have the vehicletowed to an Authorized Mazda Dealerto have the brakes inspected as soonas possible.

qABS Warning Lightí

The warning light stays on for a fewseconds when the ignition switch is turnedto the ON position.

Driving Your Mazda


5-35íSome models.


Form No.8U55-EA-05G

Black plate (150,1)

If the ABS warning light stays on whileyou're driving, the ABS control unit hasdetected a system malfunction. If thisoccurs, your brakes will function normallyas if the vehicle had no ABS.Should this happen, consult an AuthorizedMazda Dealer as soon as possible.

NOTE

When the engine is jump-started tocharge the battery, uneven rpm occursand the ABS warning light comes on.This is due to a weak battery, not amalfunction.Recharge the battery.

qElectronic Brake ForceDistribution System Warningí

If the electronic brake force distributioncontrol unit determines that somecomponents are operating incorrectly, thecontrol unit may turn the brake systemwarning light and the ABS warning lighton at the same time. The problem is likelyto be an electronic brake force distributionsystem.

WARNINGABS Warning Light and BrakeWarning Light on at the Same Time:Driving when the brake systemwarning light and ABS warning lightare on at the same time is dangerous.When both lights are on, the rearwheels could lock more quickly in anemergency stop than under normalcircumstances.Don't drive with both lights on, havethe vehicle towed to an AuthorizedMazda Dealer to have the brakesinspected as soon as possible.

qCharging System Warning Light

This warning light illuminates when theignition switch is turned to the ONposition and turns off when the engine isstarted.

If the warning light illuminates whiledriving, it indicates a malfunction of thealternator or of the charging system.Drive to the side of the road and park offthe right-of-way. Consult an AuthorizedMazda Dealer.

5-36

Driving Your Mazda

íSome models.



Form No.8U55-EA-05G

Black plate (151,1)

CAUTIONDon't continue driving when thecharging system warning light isilluminated because the engine couldstop unexpectedly.

qEngine Oil Pressure Warning Light

This warning light illuminates when theignition switch is turned to the ONposition and turns off when the engine isstarted.

This warning light indicates low engineoil pressure.

If the light illuminates while driving:

1. Drive to the side of the road and parkoff the right-of-way on level ground.

2. Turn off the engine and wait 5 minutesfor the oil to drain back into the oilpan.

3. Inspect the engine oil level (page 8-19).If it's low, add oil.

4. Check the warning light.

If the light remains illuminated even afteryou add oil, have your vehicle towed toan Authorized Mazda Dealer.

CAUTIONDon't run the engine if oil pressure islow. It could result in extensive enginedamage.

qCheck Engine Light

If this light comes on while driving, thevehicle may have a problem. It isimportant to note the driving conditionswhen the light came on and consult anAuthorized Mazda Dealer.

The check engine light may come on inthe following cases:

l The fuel tank level being very low orapproaching empty.

l The engine's electrical system has aproblem.

l The emission control system has aproblem.

l The fuel-filler cap is missing or nottightened securely.

If the check engine light remains on orflashes continuously, do not drive at highspeeds and consult an Authorized MazdaDealer as soon as possible.

Driving Your Mazda


5-37


Form No.8U55-EA-05G

Black plate (152,1)





qLow Fuel Warning Light

Low fuel warning light

This warning light in the fuel gaugesignals that the fuel tank will soon beempty.Refuel as soon as possible.

qSeat Belt Warning Light/Beep

The seat belt warning light illuminatesand a beep sound will be heard if thedriver's seat belt is not fastened when theignition switch is turned to the ONposition.

Conditions of operation

Condition Result

The driver's seat belt is notfastened when the ignitionswitch is turned to the ONposition.

The warning lightilluminates for about 1minute and a beepsound will be heardfor about 6 seconds.





5-38

Driving Your Mazda



Form No.8U55-EA-05G

Black plate (153,1)

Belt minder

The belt minder is a supplementalwarning to the seat belt warning function.This feature provides additional remindersto the driver that the driver's seat belt isnot fastened by intermittently sounding abeep sound and flashing the seat beltwarning light in the instrument cluster.

Condition Result

The driver's seat belt is notfastened when the vehiclespeed reaches 8 km/h(5 mph) and about 1 minutehas elapsed since theignition switch was turnedto the ON position.

The warning lightflashes and the beepsound will be heardfor about 6 secondsevery 30 seconds, fora period of about 5minutes.





NOTE

The belt minder can be deactivated bythe following methods.

l (Temporary deactivation)To temporarily deactivate the beltminder, turn the ignition switch tothe ON position, fasten the driver'sseat belt for about 2 seconds orlonger, and then unfasten it within 20seconds. The belt minder will bedeactivated until the ignition switchis turned to the ON position again.

l (Long-term deactivation)To deactivate the belt minder overthe long term, consult an AuthorizedMazda Dealer. If the belt minder islong-term deactivated, the beltminder will not activate until it isrestored at the Authorized MazdaDealer.

qDoor-Ajar Warning Light

This warning light comes on when anydoor isn't securely closed.

Driving Your Mazda


5-39


Form No.8U55-EA-05G

Black plate (154,1)

qLowWasher Fluid LevelWarning Lightí

This warning light indicates that littlewasher fluid remains. Add fluid (page8-27).

qAutomatic Transaxle Warning Light

This warning light stays on for a fewseconds when the ignition switch is turnedto the ON position.The light illuminates when the transaxlehas a problem.

CAUTIONIf the automatic transaxle warning lightilluminates, the transaxle has anelectrical problem. Continuing to driveyour Mazda in this condition couldcause damage to your transaxle.Consult an Authorized Mazda Dealer assoon as possible.

qTire Pressure Monitoring SystemWarning Lightí

This warning light illuminates for a fewseconds when the ignition switch is turnedto the ON position.

Thereafter, the warning light illuminateswhen tire pressure is too low in one ormore tires, and flashes when there is asystem malfunction.

WARNINGVehicle Handling When Tire PressureMonitoring System Warning LightIlluminates/Flashes:When the tire pressure monitoringsystem warning light illuminates orflashes, or the tire pressure warningbeep sound is heard, it is dangerous todrive the vehicle at high speeds, orperform sudden maneuvering orbraking. Vehicle drivability couldworsen and result in an accident.When the tire pressure monitoringsystem warning light illuminates orflashes, or the tire pressure warningbeep sound is heard, decrease vehiclespeed immediately and avoid suddenmaneuvering and braking. Have thesystem and tires checked or performthe appropriate repair as soon aspossible by an Authorized MazdaDealer.

5-40

Driving Your Mazda

íSome models.



Form No.8U55-EA-05G

Black plate (155,1)

WARNINGIgnoring the Warning Light:Ignoring the warning light isdangerous, even if you know why it isilluminated. Have the problem takencare of as soon as possible before itdevelops into a more serious situationthat could lead to tire failure and adangerous accident.

Warning light illuminates/Warningbeep sounds

When the warning light illuminates, andthe warning beep sound is heard (about 3seconds), tire pressure is too low in one ormore tires.

Adjust the tire pressure to the correct tirepressure. Refer to the specification charts(page 10-7).

CAUTIONWhen replacing/repairing the tires orwheels or both, have the work done byan Authorized Mazda Dealer, or the tirepressure sensors may be damaged.

NOTE

l Perform tire pressure adjustmentwhen the tires are cold. Tire pressurewill vary according to the tiretemperature, therefore let the vehiclestand for 1 hour or only drive it 1.6km (1 mile) or less before adjustingthe tire pressures. When pressure isadjusted on hot tires to the coldinflation pressure, the TPMSwarning light/beep may turn on afterthe tires cool and pressure dropsbelow specification.Also, an illuminated TPMS warninglight, resulting from the tire airpressure dropping due to coldambient temperature, may go out ifthe ambient temperature rises. In thiscase, it will also be necessary toadjust the tire air pressures. If theTPMS warning light illuminates dueto a drop in tire air pressure, makesure to check and adjust the tire airpressures.

l After adjusting the tire air pressures,it may require some time for theTPMS warning light to go out. If theTPMS warning light remainsilluminated, drive the vehicle at aspeed of at least 25 km/h (16 mph)for 10 minutes, and then verify that itgoes out.

If the warning light illuminates again evenafter the tire pressures are adjusted, theremay be a tire puncture. Replace thepunctured tire with the temporary sparetire (page 7-6).

Driving Your Mazda


5-41


Form No.8U55-EA-05G

Black plate (156,1)

NOTE

A tire pressure sensor is not installed tothe temporary spare tire. The warninglight will flash continuously while thetemporary spare tire is being used.

Warning light flashes

When the warning light flashes, there maybe a system malfunction. Consult anAuthorized Mazda Dealer.

qSecurity Indicator Light

This indicator light starts flashing every 2seconds when the ignition switch is turnedfrom the ON to the ACC position and theimmobilizer system is armed.

The light stops flashing when the ignitionswitch is turned to the ON position withthe correct ignition key.At this time, the immobilizer system isdisarmed and the light illuminates forabout 3 seconds and then goes out.

If the engine doesn't start with the correctignition key, and the security indicatorlight keeps illuminating or flashing, thesystem may have a malfunction. Consultan Authorized Mazda Dealer.

qHeadlight High-Beam IndicatorLight

This light indicates one of two things:

l The high-beam headlights are on.

l The turn signal lever is in the flash-to-pass position.

qShift Position Indicator Light(Automatic Transaxle)

This indicates the selected shift positionwhen the ignition switch is in the ONposition.


5-42

Driving Your Mazda



Form No.8U55-EA-05G

Black plate (157,1)


When the shift lever is in the D or Mposition, the numeral for the selected geardisplays.

qCruise Main Indicator Lightí

This light comes on when the ON/OFFswitch is pressed and the cruise controlsystem is activated.

qCruise Set Indicator Lightí

This light comes on when a cruising speedis set.

qLight-On Indicator Light (Black-out meter)

This indicator light comes on when theexterior lights and dashboard illuminationare on.

qPower Steering MalfunctionIndicator Light

This indicator light illuminates when theignition switch is turned to the ONposition and goes off when the engine isstarted.

The light illuminates to indicate that thepower steering is inoperable. If the lightilluminates, turn off the engine and restartit.If the light does not illuminate afterrestarting the engine, this indicates thatthe power steering is restored and normalsteering is possible.If the light remains illuminated, the powersteering is still inoperable. Consult anAuthorized Mazda Dealer.

NOTE

The power steering system is inoperablewhen the power steering malfunctionindicator light illuminates. Steering ispossible, but requires more physicaleffort.

Driving Your Mazda


5-43íSome models.


Form No.8U55-EA-05G

Black plate (158,1)

qTurn-Signal/Hazard WarningIndicator Lights

When operating the turn signal lights, theleft or right turn signal indicator lightflashes to indicate which turn signal lightis operating (page 5-49).

When operating the hazard warninglights, both turn signal indicator lightsflash (page 5-55).

NOTE

If an indicator light remains illuminated(does not flash) or if it flashesabnormally, one of the turn signal bulbsmay be burned out.

Beep Sounds





5-44

Driving Your Mazda



Form No.8U55-EA-05G

Black plate (159,1)

qSeat Belt Warning Beep

If the driver's seat belt is not fastenedwhen the ignition switch is turned to theON position, a beep sound will be heardfor about 6 seconds.

The beep sound will be heard again forabout 6 seconds every 30 seconds, for aperiod of about 5 minutes if the driver'sseat belt is not fastened afterwards.Refer to Seat Belt Warning Light/Beep(page 5-38).

qIgnition Key Reminder

If the ignition switch is in the LOCK orACC position with the key inserted, acontinuous beep sound will be heardwhen the driver's door is opened.

qLights-On Reminder

If lights are on and the key is removedfrom the ignition switch, a continuousbeep sound will be heard when thedriver's door is opened.

qTire Inflation Pressure WarningBeepí

The warning beep sound will be heard forabout 3 seconds when there is anyabnormality in tire inflation pressures(page 5-22).

Driving Your Mazda


5-45íSome models.


Form No.8U55-EA-05G

Black plate (160,1)

Lighting Control

qHeadlights

Type A (Without AUTO position)

Turn the headlight switch to turn theheadlights, other exterior lights anddashboard illumination on or off.

Switch Position

Headlights Off Off On

TaillightsParking lightsLicense lightsSide-marker lightsDashboard illumination

Off On On

NOTE

To prevent discharging the battery, don'tleave the lights on while the engine isoff unless safety requires them.

Type B (With AUTO position)

Turn the headlight switch to turn theheadlights, other exterior lights anddashboard illumination on or off.

Switch Position

Headlights Off Off On

Auto

TaillightsParking lightsLicense lightsSide-markerlightsDashboardillumination

Off On On

NOTE

To prevent discharging the battery, don'tleave the lights on while the engine isoff unless safety requires them.

AUTO(Auto-light control)When the headlight switch is in theAUTO position and the ignition switch isin the ON position, the light sensor sensesthe surrounding lightness or darkness andautomatically turns on or off theheadlights, other exterior lights anddashboard illumination (see chart above).

5-46

Driving Your Mazda

Switches and Controls


Form No.8U55-EA-05G

Black plate (161,1)

CAUTIONl Do not shade the light sensor byadhering a sticker or a label on thewindshield. Otherwise the lightsensor will not operate correctly.

Light sensor

l The light sensor also works as a rainsensor for the auto-wiper control.When the wiper lever is in theAUTO position and the ignitionswitch is in the ON position, thewipers may move automatically. Becareful not to pinch hands or fingersas it may cause injury, or damage thewipers (page 5-50).

NOTE

l When the headlight switch is in theAUTO position and the ignitionswitch is turned to the ACC orLOCK position, the headlights, otherexterior lights and dashboardillumination will turn off.

l The timing for turning on theheadlights, other exterior lights anddashboard illumination can bedelayed by adjusting the sensitivityof the light sensor. Consult anAuthorized Mazda Dealer regardingsensor adjustment.

Xenon fusion headlight bulbsí

The low-beam bulbs of the headlightshave xenon fusion bulbs that produce abright white beam over a wide area.

WARNINGXenon Fusion Bulb Replacement:Replacing the xenon fusion bulbs byyourself is dangerous. Because thexenon fusion bulbs require highvoltage, you could receive an electricshock if the bulbs are handledincorrectly. Do not replace the xenonfusion bulbs by yourself. Consult anAuthorized Mazda Dealer when thereplacement is necessary.

NOTE

If the headlights flash, or the brightnessweakens, the bulb-life may be depletedand a replacement is necessary. Consultan Authorized Mazda Dealer.

Driving Your Mazda


5-47íSome models.


Form No.8U55-EA-05G

Black plate (162,1)

qLights-On Reminder

If lights are on and the key is removedfrom the ignition switch, a continuousbeep sound will be heard when thedriver's door is opened.

qHeadlight High-Low Beam

Push the lever forward for high beam.Pull back to original position for lowbeam.

High beam

Low beam

qFlashing the Headlights

To flash the headlights, pull the lever fullytoward you. The headlight switch doesnot need to be on, and the lever will returnto the normal position when released.

qHeadlight Levelingí

The number of riders and weight of cargoin the luggage compartment change theangle of the headlights.The headlight leveling switch adjusts thisangle.

Select the proper setting from the following chart.

Front seat Rearseat

LoadSwitchPositionDriver Passenger

× ― ― ― 0

× × ― ― 0

× × × ― 1

× × × × 2

× ― ― × 3

×: Yes―: No

qDaytime Running Lights (Canada)

In Canada, vehicles must be driven withthe headlights on during daytimeoperation.

For that reason, the daytime running lightsautomatically turn on when the ignitionswitch is turned to the ON position.

NOTE

The Daytime Running Lights turn offwhen the parking brake is applied.

5-48

Driving Your Mazda

íSome models.



Form No.8U55-EA-05G

Black plate (163,1)

Turn and Lane-ChangeSignals

qTurn Signal

Move the signal lever down (for a leftturn) or up (for a right turn) to the stopposition. The signal will self-cancel afterthe turn is completed.

If the indicator light continues to flashafter a turn, manually return the lever toits original position.

Right turn

Left turn

OFF

Right lane change

Left lane change

Green indicators on the dashboard showwhich signal is working.

Lane-change signals

Move the lever slightly toward thedirection of the change ―until theindicator flashes― and hold it there. Itwill return to the off position whenreleased.

NOTE

If an indicator light stays on withoutflashing or if it flashes abnormally, oneof the turn signal bulbs may be burnedout.

Fog Lightsí

The fog lights help you to see as well asto be seen.

The headlights must be turned on to turnon the front fog lights.

To turn the front fog lights on, rotate thefog light switch to the position.

Fog light switch

To turn the front fog lights off, rotate thefog light switch to the OFF position orturn the headlights off.

NOTE

l The fog lights will turn off when theheadlights are set at high beam.

l (With auto-light control)If the headlight switch is in theAUTO position, the front fog lightscan be turned on when theheadlights, the exterior lights anddashboard illumination are on.

Driving Your Mazda


5-49íSome models.


Form No.8U55-EA-05G

Black plate (164,1)

Windshield Wipers andWasher

The ignition switch must be in the ONposition.

WARNINGSubstitute Washer Fluid:Using radiator antifreeze as washerfluid is dangerous. If sprayed on thewindshield, it will dirty the windshield,affect your visibility, and could resultin an accident. Use only windshieldwasher fluid or plain water in thereservoir.

Frozen Washer Fluid:Using windshield washer fluid withoutanti-freeze protection in freezingtemperatures is dangerous. Thewasher fluid could freeze on thewindshield and block your vision. Youcould have an accident. Don't use thewasher without first warming thewindshield and never use plain tapwater.

NOTE

Because heavy ice and snow can jamthe wiper blades, the wiper motor isprotected from motor breakdown,overheating and possible fire by acircuit breaker. This mechanism willautomatically stop operation of theblades, but only for about 5 minutes.If this happens, turn off the wiperswitch and park off the right-of-way,and remove the snow and ice.After 5 minutes, turn on the switch andthe blades should operate normally. Ifthey don't resume functioning, consultan Authorized Mazda Dealer as soon aspossible. Drive to the side of the roadand park off the right-of-way. Wait untilthe weather clears before trying to drivewith the wipers inoperative.

qWindshield Wipers

Type A (With INT position)

Turn the wipers on by pulling the leverdown.

― MistINT ― Intermittent1 ― Low speed2 ― High speed

5-50

Driving Your Mazda



Form No.8U55-EA-05G

Black plate (165,1)

For a single wiping cycle, push the leverup to .

Variable-speed intermittent wipersí

Set the lever to INT and choose theinterval timing by rotating the ring.

INT ring

Type B (With AUTO position)

Turn the wipers on by pulling the leverdown.

― MistAUTO― Auto control1 ― Low speed2 ― High speed

For a single wiping cycle, push the leverup to .

AUTO (Auto-wiper control)When the wiper lever is in the AUTOposition, the rain sensor senses theamount of rainfall on the windshield andturns the wiper on or off automatically(off―intermittent―low speed―highspeed).

The sensitivity of the rain sensor can beadjusted by turning the switch on thewiper lever.From the center position (normal), turnthe switch towards (+) for highersensitivity (faster response) or turn theswitch towards (_) for less sensitivity(slower response).

Switch

Higher sensitivity

Less sensitivity

Center position

Driving Your Mazda


5-51íSome models.


Form No.8U55-EA-05G

Black plate (166,1)

CAUTIONl Do not shade the rain sensor byadhering a sticker or a label on thewindshield. Otherwise the rainsensor will not operate correctly.

Rain sensor

l When the wiper lever is in theAUTO position and the ignitionswitch is in the ON position, thewipers may move automatically inthe following cases:

l If the windshield above the rainsensor is touched.

l If the windshield above the rainsensor is wiped with a cloth.

l If the windshield is struck with ahand or other object.

l If the rain sensor is struck with ahand or other object from insidethe vehicle.

Be careful not to pinch hands orfingers as it may cause injury, ordamage the wipers. When washingor servicing your Mazda, make surethe wiper lever is in the OFFposition.

NOTE

l The auto-wiper control may notoperate when the rain sensortemperature is about _10 °C (14 °F)or lower, or about 85 °C (185 °F) orhigher.

l If the windshield is coated withwater repellent, the rain sensor maynot be able to sense the amount ofrainfall correctly and auto-wipercontrol may not operate properly.

l If dirt or foreign matter (e.g. ice ormatter containing salt water) adheresto the windshield above the rainsensor or if the windshield is iced, itcould cause the wipers to moveautomatically. However, if the wiperscannot remove this ice, dirt orforeign matter, the auto-wipercontrol will stop operation. In thiscase, pull the wiper lever to the 1 or2 position for manual operation, orremove the ice, dirt or foreign matterby hand to restore the auto-wiperoperation.

qWindshield Washer

Pull the lever toward you and hold it tospray washer fluid.

OFF

Washer

5-52

Driving Your Mazda



Form No.8U55-EA-05G

Black plate (167,1)

NOTE

With the wiper lever in the OFF or INT(Type A)/AUTO (Type B) position, thewipers will operate continuously untilthe lever is released.

If the washer doesn't work, inspect thefluid level (page 8-27). If it's OK, consultan Authorized Mazda Dealer.

Rear Window Wiper andWasher (5 Door)


qRear Window Wiper

Turn the wiper on by turning the rearwiper/washer switch.ON ― NormalINT ― Intermittent

qRear Window Washer

To spray washer fluid, turn the rear wiper/washer switch to the position. Afterthe switch is released, the washer willstop.

NOTE

There are two washer positions: up anddown. In the down washer position, thewiper will not be activated.

If the washer doesn't work, inspect thefluid level (page 8-27). If it's OK and thewasher still doesn't work, consult anAuthorized Mazda Dealer.

Driving Your Mazda


5-53


Form No.8U55-EA-05G

Black plate (168,1)

Rear Window DefrosterThe rear window defroster clears frost,fog, and thin ice from the rear window.


Press the switch to turn on the rearwindow defroster. The rear windowdefroster operates for about 10―15minutes and turns off automatically.The indicator light illuminates duringoperation.

To turn off the rear window defrosterbefore the 10―15 minutes has elapsed,press the switch again.

Manual Type Air-Conditioning

Indicator light

Fully Automatic Type Air-Conditioning

Indicator light

CAUTIONDon't use sharp instruments or windowcleaners with abrasives to clean theinside of the rear window surface. Theymay damage the defroster grid insidethe window.

NOTE

This defroster is not designed formelting snow. If there is anaccumulation of snow on the rearwindow, remove it before using thedefroster.

5-54

Driving Your Mazda



Form No.8U55-EA-05G

Black plate (169,1)

HornTo sound the horn, press around themark on the steering wheel.

Hazard Warning FlasherThe hazard warning lights should alwaysbe used when you stop on or near aroadway.

The hazard warning lights warn otherdrivers that your vehicle is a traffic hazardand that they must take extreme cautionwhen near it.

Hazard warning flasher

Depress the hazard warning flasher and allfour turn signals will flash.

NOTE

l The turn signals don't work when thehazard warning lights are on.

l Check local regulations about the useof hazard warning lights while thevehicle is being towed. They mayforbid it.

Driving Your Mazda


5-55


Form No.8U55-EA-05G

Black plate (170,1)

5-56


Form No.8U55-EA-05G

Black plate (171,1)

6 Interior Comfort

Use of various features for drive comfort, including air-conditioning and audiosystem.

Climate Control System ............................................................... 6-2Operating Tips ........................................................................... 6-2Vent Operation .......................................................................... 6-3Types of the Climate Control System ....................................... 6-5Manual Type ............................................................................. 6-6Fully Automatic Typeí ........................................................... 6-11

Audio System ............................................................................... 6-16Antenna ................................................................................... 6-16Operating Tips for Audio System ........................................... 6-16Audio Set ................................................................................ 6-23Audio Control Switch Operation (Steering Wheel)í ............. 6-38Safety Certification ................................................................. 6-41

Interior Equipment ..................................................................... 6-42Sunvisors ................................................................................. 6-42Interior Lights ......................................................................... 6-42Information Display ................................................................ 6-45Lighter ..................................................................................... 6-50Ashtray .................................................................................... 6-50Cup Holder .............................................................................. 6-51Bottle Holder ........................................................................... 6-52Storage Compartments ............................................................ 6-52

6-1íSome models.


Form No.8U55-EA-05G

Black plate (172,1)

Operating Tips

qOperating the Climate ControlSystem

Operate the climate control system withthe engine running.

NOTE

To prevent the battery from beingdischarged, do not leave the fan controldial on for a long period of time withthe ignition switch in the ACC positionwhen the engine is not running.

qClearing the Air Inlet

Clear all obstructions like leaves, snowand ice from the hood and the air inlet inthe cowl grille to improve the systemefficiency.

qFoggy Windows

The windows may fog up easily in humidweather. Use the climate control system todefog the windows.

To help defog the windows, operate theair conditioner to dehumidify the air.

NOTE

The air conditioner may be used alongwith the heater to dehumidify the air.

qOutside/Recirculated Air Position

Use the outside air position in normalconditions. The recirculated air positionshould be used only when driving ondusty roads or for quick cooling of theinterior.

qParking in Direct Sunlight

If the vehicle has been parked in directsunlight during hot weather, open thewindows to let warm air escape, then runthe climate control system.

qNot Using for a Long Period

Run the air conditioner about 10 minutesat least once a month to keep internalparts lubricated.

qCheck the Refrigerant before theWeather Gets Hot

Have the air conditioner checked beforethe weather gets hot. Lack of refrigerantmay make the air conditioner lessefficient. Consult an Authorized MazdaDealer for refrigerant inspection.

The air conditioner is filled withHFC134a (R134a), a refrigerant that willnot damage the ozone layer.If the air conditioner is low on refrigerantor has a malfunction, consult anAuthorized Mazda Dealer.

qReplacement of the Cabin Air Filter

If your vehicle is equipped with an airfilter for the air conditioner, it is necessaryto change the filter periodically asindicated in scheduled maintenance (page8-3). Consult an Authorized MazdaDealer for replacement of the cabin airfilter.

6-2

Interior Comfort

Climate Control System


Form No.8U55-EA-05G

Black plate (173,1)

Vent Operation

Center vents

Side vents

qAdjusting the Vents

Directing airflow

Side Vents

To adjust the direction of airflow, open thevents and rotate them left and right.

Push

Center Vents

To adjust the direction of airflow, movethe adjustment knob.

Knob

NOTE

When using the air conditioner, mistmay come out from the vents. This isnot a sign of trouble but a result ofhumid air being suddenly cooled.

Interior Comfort


6-3


Form No.8U55-EA-05G

Black plate (174,1)

qSelecting the Airflow Mode

Dashboard and Floor Vents Defroster Vents

Floor Vents

Dashboard Vents Defroster and Floor Vents

6-4

Interior Comfort



Form No.8U55-EA-05G

Black plate (175,1)

Types of the Climate Control SystemManual type and fully automatic type climate control systems are explained separately.Check your vehicle's climate control type and read the appropriate pages.Climate control information is displayed on the information display.Manual Type ............................................................................................................ page 6-6

Fully Automatic Type ............................................................................................. page 6-11

Interior Comfort


6-5


Form No.8U55-EA-05G

Black plate (176,1)

Manual Type

Temperature control dialFan control dialMode selector dial

Air intake selector

A/C Switch

Some models.

qControl Switches

Temperature control dial

HotCold

This dial controls temperature. Turn itclockwise for hot and counterclockwisefor cold.

Fan control dial

This dial allows variable fan speeds.0―Fan off1―Low speed2―Medium low speed3―Medium high speed4―High speed

6-6

Interior Comfort



Form No.8U55-EA-05G

Black plate (177,1)

Mode selector dial

Turn the mode selector dial to selectairflow mode (page 6-4).

NOTE

l If you want to slightly adjust theairflow amount, set the modeselector dial at .

l For example, when the mode selectordial is at the position between the

and positions, airflow fromthe floor vent is less than that of the

position.

A/C switch í

Push the A/C switch to turn the airconditioner on. The indicator light on theswitch will illuminate when the fancontrol dial is set at position 1, 2, 3, or 4.

Push the switch once again to turn the airconditioner off.

NOTE

The air conditioner may not functionwhen the outside temperatureapproaches 0 °C (32 °F).

Air intake selector

This switch controls the source of airentering the vehicle.

Press the switch to alternate between theand positions. The indicator

light for the selected mode will illuminate.

It is recommended that under normalconditions the switch be kept in theoutside air position.

Outside air position ( )

Outside air is taken into the vehicle. Usethis position for normal ventilation andheating.

Recirculated air position ( )

Outside air is shut off. Air within thevehicle is recirculated.

This position can be used when driving ona dusty road or in similar conditions. Italso helps to provide quicker cooling ofthe interior.

Interior Comfort


6-7íSome models.


Form No.8U55-EA-05G

Black plate (178,1)

WARNINGThe Recirculated Air Position:Using the position in cold orrainy weather will cause the windowsto fog up. Your vision will behampered, which could lead to aserious accident. Do not use theposition in cold or rainy weather.

qHeating

1. Set the mode selector dial to theposition.

2. Set the temperature control dial to thehot position.

3. Set the fan control dial to the desiredspeed.

NOTE

l If the windshield fogs up easily, setthe mode selector dial to theposition.

l If cooler air is desired at face level,set the mode selector dial at theposition and adjust the temperaturecontrol dial to maintain maximumcomfort.

l The air to the floor is warmer thanair to the face (except when thetemperature control dial is set at theextreme hot or cold position).

l In the , , or position, theair conditioner is automaticallyturned on (however, the indicatorlight does not illuminate) and the

position is automaticallyselected to defrost the windshield.In the or position, the

position cannot be changed tothe position.

qCooling (With Air Conditioner)


2. Set the temperature control dial to thecold position.


4. Turn on the air conditioner by pressingthe A/C switch.

5. Adjust the fan control dial andtemperature control dial to maintainmaximum comfort.

6-8

Interior Comfort



Form No.8U55-EA-05G

Black plate (179,1)

CAUTIONWhen using the air conditioner whiledriving up long hills or in heavy traffic,closely monitor the temperature gauge(page 5-31).The air conditioner may cause engineoverheating. If the gauge indicatesoverheating, turn the air conditioner off(page 7-12).

NOTE

l When maximum cooling is desired,set the temperature control dial to theextreme cold position and set the airintake selector to the position,then set the fan control dial toposition 4.

l If warmer air is desired at floor level,set the mode selector dial at theposition and adjust the temperaturecontrol dial to maintain maximumcomfort.

l The air to the floor is warmer thanair to the face (except when thetemperature control dial is set at theextreme hot or cold position).

qVentilation


2. Set the air intake selector to theposition.

3. Set the temperature control dial to thedesired position.


qWindshield Defrosting and Defogging




WARNINGFoggy Windshield:Using the position with thetemperature control set to the coldposition will cause the outside of thewindshield to fog up. Your vision willbe hampered, which could lead to aserious accident. Set the temperaturecontrol to the hot or warm positionwhen using the position.

NOTE

l For maximum defrosting, set thetemperature control dial to theextreme hot position and the fancontrol dial to position 4.

l If warm air is desired at the floor, setthe mode selector dial to theposition.

l In the , , or position, theair conditioner is automaticallyturned on (however, the indicatorlight does not illuminate) and the

position is automaticallyselected to defrost the windshield.In the or position, the

position cannot be changed tothe position.

Interior Comfort


6-9


Form No.8U55-EA-05G

Black plate (180,1)

qDehumidifying (With AirConditioner)

Operate the air conditioner in cool or coldweather to help defog the windshield andside windows.

1. Set the mode selector dial to thedesired position.

2. Set the air intake selector to theposition.



5. Turn on the air conditioner by pressingthe A/C switch.

NOTE

One of the functions of the airconditioner is dehumidifying the airand, to use this function, thetemperature does not have to be set tocold. Therefore, set the temperaturecontrol dial to the desired position (hotor cold) and turn on the air conditionerwhen you want to dehumidify the cabinair.

6-10

Interior Comfort



Form No.8U55-EA-05G

Black plate (181,1)

Fully Automatic Typeí

Climate control information is displayed on the information display.

Temperature control dialFan control dialMode selector switch

Air intake selector

A/C Switch

OFF switch Auto switch

AMB (Ambient Temperature) switch

Windshield defroster switch

qControl Switches

AUTO switch

By pressing the AUTO switch thefollowing functions will be automaticallycontrolled in accordance with the settemperature:

l Airflow temperature

l Amount of airflow

l Selection of airflow mode

l Outside/Recirculated air selection

l Air conditioner operation

l A/C or A/C ECO selection

Interior Comfort


6-11íSome models.


Form No.8U55-EA-05G

Black plate (182,1)

NOTE

AUTO switch indicator light

l When on, it indicates AUTOoperation, and the system willfunction automatically.

l When off, indicates the operation ofother switches such as the modeselector switch, fan control dial, A/Cswitch and windshield defrosterswitch. Other functions will continueto operate automatically.

OFF switch

Pressing the OFF switch shuts off theclimate control system.

Temperature control dial

HotCold

This dial controls temperature.Turn itclockwise for hot and counterclockwisefor cold.

Fan control dial

Slow Fast

The fan has seven speeds. The selectedspeed will be displayed.

Mode selector switch

The desired airflow mode can be selected(page 6-4).

NOTE

With the airflow mode set toposition and the temperature controldial set at a medium temperature,heated air is directed to the feet and acomparably lower air temperature willflow through the central, left and rightvents.

6-12

Interior Comfort



Form No.8U55-EA-05G

Black plate (183,1)

A/C switch

With the AUTO or fan control dial ON,press the A/C switch to select the airconditioning (cooling/dehumidifyingfunctions) on or off.

NOTE

l Selection of A/C and A/C ECO isdone automatically. Although airconditioning and defogging ability isreduced, the A/C ECO function isdesigned to economize use of the airconditioning system.

l The air conditioner may not functionwhen the outside temperatureapproaches 0 °C (32 °F). (Indicatorremains on even when system is off.)

Air intake selector

Outside or recirculated air positions canbe selected. Press the switch to selectoutside/recirculated air positions.

Recirculated air position ( )

Use this position when going throughtunnels, driving in congested traffic (highengine exhaust areas) or when quickcooling is desired.

Outside air position ( )

Use this position for normal conditionsand defogging.

WARNINGThe Recirculated Air Position:Using the position in cold orrainy weather will cause the windowsto fog up. Your vision will behampered, which could lead to aserious accident. Do not use theposition in cold or rainy weather.

AMB (Ambient Temperature) switch

Press the AMB button to display theambient temperature.

Interior Comfort


6-13


Form No.8U55-EA-05G

Black plate (184,1)

NOTE

l The displayed ambient temperaturemay vary from the actual ambienttemperature depending on thesurrounding area and vehicleconditions.

l Press the AMB button again toswitch the display from ambienttemperature to the temperature setfor the air conditioner.

Windshield defroster switch

Press the switch to defrost the windshieldand front door windows.

qOperation of Automatic AirConditioning

1. Press the AUTO switch. Selection ofthe airflow mode, air intake selectorand amount of airflow will beautomatically controlled.

2. Use the temperature control dial toselect a desired temperature.

HotCold

To turn off the system, press the OFFswitch.

NOTE

l Setting the temperature to maximumhigh or low will not provide thedesired temperature at a faster rate.

l When selecting heat, the system willrestrict airflow until it has warmed toprevent cold air from blowing out ofthe vents.

6-14

Interior Comfort



Form No.8U55-EA-05G

Black plate (185,1)

qWindshield Defrosting and Defogging

Press the windshield defroster switch.In this position, the position isautomatically selected, and the airconditioner automatically turned on. Theair conditioner will direct dehumidified airto the front windshield and side windows(page 6-4). Airflow amount will beincreased.

WARNINGFoggy Windshield:Using the position with thetemperature control set to the coldposition will cause the outside of thewindshield to fog up. Your vision willbe hampered, which could lead to aserious accident. Set the temperaturecontrol to hot or warm position whenusing the position.

NOTE

Use the temperature control dial toincrease the air flow temperature anddefog the windshield more quickly.

qSunlight/Temperature Sensor

The fully automatic air conditionerfunction measures inside and outsidetemperatures, and sunlight. It then setstemperatures inside the passengercompartment accordingly. Don't obstructthe sensor.

Sunlight sensor

Interior temperature sensor

Interior Comfort


6-15


Form No.8U55-EA-05G

Black plate (186,1)

Antenna

qDetachable Type

To remove the antenna, turn itcounterclockwise.To install the antenna, turn it clockwise.Make sure the antenna is securelyinstalled.

Remove

Install

CAUTIONTo prevent damage to the antenna,remove it before entering a car washfacility or passing beneath a lowoverhead clearance.

NOTE

When leaving your vehicle unattended,we recommend that you remove theantenna and store it inside the vehicle.

Operating Tips for AudioSystem

WARNINGDo Not Adjust Audio While Drivingthe Vehicle:Adjusting the audio while driving thevehicle is dangerous as it coulddistract your attention from the vehicleoperation which could lead to aserious accident. Always adjust theaudio while the vehicle is stopped.Even if the audio control switches areequipped on the steering wheel, learnto use the switches without lookingdown at them so that you can keepyour maximum attention on the roadwhile driving the vehicle.

CAUTIONFor the purposes of safe driving, adjustthe audio volume to a level that allowsyou to hear sounds outside of thevehicle.

NOTE

l Do not use the audio for long periodsof time while the engine is off.Otherwise the battery could go dead.

l If a digital cellular phone or CBradio is used in or near the vehicle, itcould cause noise to occur from theaudio system, however, this does notindicate that the system has beendamaged.

6-16

Interior Comfort

Audio System


Form No.8U55-EA-05G

Black plate (187,1)

qRadio Reception

AM characteristics

AM signals bend around such things asbuildings or mountains and bounce off theionosphere. Therefore, they can reachlonger distances than FM signals. Becauseof this, two stations may sometimes bepicked up on the same frequency at thesame time.

Station 2Station 1

Ionosphere

FM characteristics

An FM broadcast range is usually about40―50 km (25―30 miles) from thesource. Because of extra coding needed tobreak the sound into two channels, stereoFM has even less range than monaural(non-stereo) FM.

(25—30 miles)40—50 km

FM Station

Signals from an FM transmitter are similarto beams of light because they do notbend around corners, but they do reflect.Unlike AM signals, FM signals cannottravel beyond the horizon. Therefore, FMstations cannot be received at the greatdistances possible with AM reception.

AM waveFM wave

FM wave

100—200 km (60—120 miles)

Ionosphere

Atmospheric conditions can also affectFM reception. High humidity will causepoor reception. However, cloudy daysmay provide better reception than cleardays.

Multipath noise

Since FM signals can be reflected byobstructions, it is possible to receive boththe direct signal and the reflected signal atthe same time. This causes a slight delayin reception and may be heard as a brokensound or a distortion. This problem mayalso be encountered when in closeproximity to the transmitter.

Reflected waveDirect

Interior Comfort

Audio System

6-17


Form No.8U55-EA-05G

Black plate (188,1)

Flutter/Skip noise

Signals from an FM transmitter move instraight lines and become weak in valleysbetween tall buildings, mountains, andother obstacles. When a vehicle passesthrough such an area, the receptionconditions may change suddenly, resultingin annoying noise.

Weak signal noise

In suburban areas, broadcast signalsbecome weak because of distance fromthe transmitter. Reception in such fringeareas is characterized by sound breakup.

Strong signal noise

This occurs very close to a transmittertower. The broadcast signals areextremely strong, so the result is noise andsound breakup at the radio receiver.

Station drift noise

When a vehicle reaches the area of twostrong stations broadcasting at similarfrequencies, the original station may betemporarily lost and the second stationpicked up. At this time there will be somenoise from this disturbance.

Station 2 88.3 MHz

Station 1 88.1 MHz

6-18

Interior Comfort

Audio System


Form No.8U55-EA-05G

Black plate (189,1)

qOperating Tips for Cassette TapePlayer

Cleaning the cassette tape player

The tape head, capstans, and pinch rollerswill gather oxide residue from cassettetapes. This can cause weak or waveringsounds and damage to the cassette tapesand player. Use a good quality head-cleaning tape or a liquid cleaner cassettetape to remove it.Should the unit not operate normally,consult an Authorized Mazda Dealer.Never attempt to repair it or insert ascrewdriver or anything else.

Handling the cassette tape player

The following precautions should beobserved.

l Do not spill any liquid on the audiosystem.

l Do not insert any objects, other thancassette tape, into the slot.

l If the cassette tape is loose, it mayproduce poor sound or performanceduring playback. Use a pencil orsomething similar to remove any slack.

l Only cassette tapes that play no longerthan 90 minutes should be used.Cassette tape exceeding 90 minutes arethin and may easily break.

l Do not leave a cassette tape in the tapeplayer slot when not in use. Remove itcompletely to permit the slot door toclose and to protect the mechanismfrom dust.

l Store cassette tapes away from extremeheat, magnetic fields, and directsunlight. Protect the exposed cassettetape from dirt and damage. Storecassette tapes in their original cases orother protective cases.

Interior Comfort

Audio System

6-19


Form No.8U55-EA-05G

Black plate (190,1)

qOperating Tips for CD Player/In-Dash CD Changer

Condensation phenomenon

Immediately after turning on the heaterwhen the vehicle is cold, the CD oroptical components (prism and lens) in theCD player/changer may become cloudedwith condensation. At this time, the CDwill eject immediately when placed in theunit. A clouded CD can be correctedsimply by wiping it with a soft cloth.Clouded optical components will clearnaturally in about an hour. Wait fornormal operation to return beforeattempting to use the unit.

Handling the CD player/In-dash CDchanger

The following precautions should beobserved.

l Do not spill any liquid on the audiosystem.

l Do not insert any objects, other thanCDs, into the slot.

l The CD revolves at high speed withinthe unit. Defective (cracked or badlybent) CDs should never be used.

l Do not use non-conventional discssuch as heart-shaped, octagonal discs,etc. The CD player/changer could bedamaged.

l A new CD may have rough edges onits inner and outer perimeters. If a discwith rough edges is used, propersetting will not be possible and the CDplayer/changer will not play the CD.Remove the rough edges in advance byusing a ball-point pen or pencil asshown below. To remove the roughedges, rub the side of the pen or pencilagainst the inner and outer perimeter ofthe CD.

6-20

Interior Comfort

Audio System


Form No.8U55-EA-05G

Black plate (191,1)

l When driving over uneven surfaces,the sound may jump.

l The CD player/changer has beendesigned to play CDs bearing theidentification logo as shown. No otherdiscs can be played.

l Be sure never to touch the signalsurface when handling the CDs. Pickup a CD by grasping the outer edge orthe edge of the hole and the outer edge.

l Do not stick paper or tape on the CD.Avoid scratching the reverse side (theside without a label).

l Dust, finger smudges, and dirt candecrease the amount of light reflectedfrom the signal surface, thus affectingsound quality. If the CD shouldbecome soiled, gently wipe it with asoft cloth from the center of the CD tothe edge.

l Do not use record sprays, antistaticagents, or household spray cleaners.Volatile chemicals such as benzine andthinner can also damage the surface ofthe CD and must not be used. Anythingthat can damage, warp, or fog plasticshould never be used to clean CDs.

l CDs, like traditional audio records, aremade of plastic. To avoid warping,keep the CDs in their cases and do notstore them where they will be exposedto direct sunlight.

l The CD player/changer ejects the CD ifthe CD is inserted upside down. Alsodirty and/or defective CDs may beejected.

l An 8 cm (3 in) CD can be played in theCD player.

l An 8 cm (3 in) CD cannot be played inthe In-dash CD changer even if an 8cm (3 in) CD adapter is used.

l Do not insert cleaning discs in the CDplayer/changer.

l Do not insert any disc with a peel-offor seal on it.

Interior Comfort

Audio System

6-21


Form No.8U55-EA-05G

Black plate (192,1)

MEMO

6-22


Form No.8U55-EA-05G

Black plate (193,1)

Audio Set

CD Player In-Dash CD Changer

Cassette Tape Player

Illustration is of a representative audio unit.

Audio information is displayed on the information display.

Power/Volume/Sound Controls .............................................................................. page 6-24Operating the Radio ............................................................................................... page 6-28Operating the Cassette Tape Player ........................................................................ page 6-30Operating the Compact Disc (CD) Player .............................................................. page 6-32Operating the In-Dash CD Changer ....................................................................... page 6-34Error Indications ..................................................................................................... page 6-37

Interior Comfort

Audio System

6-23


Form No.8U55-EA-05G

Black plate (194,1)

qPower/Volume/Sound Controls

Audio control dialPower/Volume dial

Power ON/OFF

Turn the ignition switch to the ACC orON position.

Press the power/volume dial to turn theaudio system on.Press the power/volume dial again to turnthe audio system off.

NOTE

To prevent the battery from beingdischarged, do not leave the audiosystem on for a long period of timewhen the engine is not running.

Volume adjustment

To adjust the volume, turn the power/volume dial.

Turn the power/volume dial to the right toincrease volume, to the left to decrease it.

Audio sound adjustment

1. Press the audio control dial to select thefunction. The selected function will beindicated.

*

*

*

*

Depending on the mode selected, the indication changes.

Standard audio- equipped model

6-24

Interior Comfort

Audio System


Form No.8U55-EA-05G

Black plate (195,1)

*

*

*

*

Depending on the mode selected, the indication changes.

BOSE Sound System-equipped model

2. Turn the audio control dial to adjust theselected functions as follows:

Standard audio-equipped model

Indication Turn Left Turn Right

Select mode

Decreasebass

Increasebass

Decreasetreble

Increasetreble

Shift thesound to the

front


rear


left


right

OFF ON

OFF ON

BOSE Sound System-equipped model

Indication Turn Left Turn Right

Select mode

Decreasebass

Increasebass

Decreasetreble

Increasetreble


front


rear


left


right

OFF ON

OFF ON

NOTE

About 5 seconds after selecting anymode, the volume function will beautomatically selected. To reset bass,treble, fade, and balance, press theaudio control dial for 2 seconds. Theunit will beep and “CLEAR” will bedisplayed.

Automatic Level Control (ALC)

The automatic level control is a featurethat automatically adjusts audio volumeand sound quality according to the vehiclespeed.The volume increases in accordance withthe increase in vehicle speed, anddecreases as vehicle speed decreases.

Interior Comfort

Audio System

6-25


Form No.8U55-EA-05G

Black plate (196,1)

The following four modes are available.Select the desired mode.

Mode Volume change

No change

Minimum

Medium

Maximum

Turn the audio control dial to select theALC OFF, ALC LEVEL1―3 mode. Theselected mode will be indicated.

BEEP setting

The beep-sound when operating the audiosystem can be set on or off.

ILLM EFT setting (Illumination settingduring operation)

The audio system illumination duringoperation can be set on or off.

6-26

Interior Comfort

Audio System


Form No.8U55-EA-05G

Black plate (197,1)

MEMO

6-27


Form No.8U55-EA-05G

Black plate (198,1)

qOperating the Radio

Scan button

Band selector buttons

Seek tuning buttons

Channel preset buttons

*For reception of optional SIRIUS digital satellite radio.Used on vehicles equipped with the separately sold SIRIUS digital satellite radio unit.For information on use, read the manual accompanying the SIRIUS unit.Subscription of SIRIUS digital satellite radio service is available in the U.S. (Except Alaska and Hawaii).

Satellite button*

Manual tuning button/Auto memory button/Electric serial number button*

Radio ON

Press a band selector button ( ) toturn the radio on.

Band selection

Successively pressing the band selectorbutton ( ) switches the bands asfollows: FM1→FM2→AM.

The selected mode will be indicated. IfFM stereo is being received, “ST” will bedisplayed.

NOTE

If the FM broadcast signal becomesweak, reception automatically changesfrom STEREO to MONO for reducednoise, and the “ST” indicator will goout.

Tuning

The radio has the following tuningmethods: Manual, Seek, Scan, Presetchannel, and Auto memory tuning. Theeasiest way to tune stations is to set themon preset channels.

NOTE

If the power supply is interrupted (fuseblows or the battery is disconnected),the preset channels will be canceled.

Manual tuning

Turning the manual tuning dial willchange the frequency higher or lower.

6-28

Interior Comfort

Audio System


Form No.8U55-EA-05G

Black plate (199,1)

Seek tuning

Pressing the seek tuning button ( , )will cause the tuner to seek a higher orlower frequency automatically.

NOTE

If you continue to press and hold thebutton, the frequency will continuechanging without stopping.

Scan tuning

Press the scan button ( ) toautomatically sample strong stations.Scanning stops at each station for about 5seconds. To hold a station, press the scanbutton ( ) again during this interval.

Preset channel tuning

The 6 preset channels can be used to store6 AM and 12 FM stations.

1. To set a channel first select AM, FM1,or FM2. Tune to the desired station.

2. Depress a channel preset button forabout 2 seconds until a beep sound isheard. The preset channel number andstation frequency will be displayed.The station is now held in the memory.

3. Repeat this operation for the otherstations and bands you want to store.To tune one in the memory, select AM,FM1, or FM2 and then press itschannel preset button. The stationfrequency and the channel number willbe displayed.

NOTE

If the power supply is interrupted (fuseblows or the battery is disconnected),the preset channels will be canceled.

Auto memory tuning

This is especially useful when driving inan area where the local stations are notknown. Additional AM/FM stations canbe stored without disturbing thepreviously set channels.

Press and hold the auto memory button( ) for about 2 seconds until a beepsound is heard; the system willautomatically scan and temporarily storeup to 6 stations with the strongestfrequencies in each selected band in thatarea.

After scanning is completed, the stationwith the strongest frequency will be tunedand its frequency displayed.Press and release the auto memory button( ) to recall stations from the auto-stored stations. One stored station will beselected each time; its frequency andchannel number will be displayed.

NOTE

If no stations can be tuned afterscanning operations, “A” will bedisplayed.

Interior Comfort

Audio System

6-29


Form No.8U55-EA-05G

Black plate (200,1)

qOperating the Cassette Tape Playerí

Cassette tape eject button

Cassette tape slotProgram button

Dolby NR button

Repeat button Cassette tape play button

Fast-forward button

Rewind button

APC button: (next program)

(one being played)

Cassette tape insert

Insert the cassette tape into the slot, openedge to the right and cassette tape willbegin play, and “TAPE PLAY” will bedisplayed. At the end of the cassette tape,the unit automatically reverses cassettetape play. When is lit, the cassettetape's top side is playing. When is lit,the bottom side is on.

Playing

Press the cassette tape play button( ) to start play when a cassette tapeis in the unit. If there isn't a cassette tapein the unit when the cassette tape playbutton ( ) is pressed, “NO TAPE”will flash on and off.

Dolby noise reduction

When using a tape with Dolby NR*, pushthe Dolby NR button ( ). Thesymbol will be displayed. To play a tapewithout Dolby NR, push the button onceagain.

* Noise reduction system manufacturedunder license from Dolby LaboratoriesLicensing Corporation.Dolby and the double-D symbolare trademarks of Dolby LaboratoriesLicensing Corporation.

Ejecting the cassette tape

Press the cassette tape eject button ( ) toeject the cassette tape.

6-30

Interior Comfort

íSome models.

Audio System


Form No.8U55-EA-05G

Black plate (201,1)

NOTE

The cassette tape can be ejected whenthe ignition switch is in the OFFposition.

Fast-forward/Rewind

Press the fast-forward button ( ) tofast-forward.Press the rewind button ( ) to rewind.To stop this operation and play thecassette tape, press the button again.

NOTE

When the cassette tape ends during fast-forward or rewind, it automaticallystops and starts playing.

Reversing

Press the program button ( ) tochange cassette tape-play direction.

NOTE

When the cassette tape ends, the unitautomatically reverses play.

Automatic program control (APC)

APC is used to find the beginning ofeither the next program or the one beingplayed.

Press the APC button ( ) to thebeginning of the next selection.Press the APC button ( ) to thebeginning of the one being played. Tostop this operation and play the cassettetape, press the button again.

NOTE

APC may not operate properly if:

l A tape was recorded at a low level.

l A tape has long, silent intervals.

l A tape is a live recording.

l A tape has very short intervals ofless than 3 seconds.

Repeat play

This operation makes it possible to listento a selection repeatedly.

Press the repeat button ( ) during play.The current selection playing will berepeated (“RPT” will be displayed).Press the repeat button ( ) once againto cancel repeat play.

NOTE

RPT may not operate properly if:

l A tape was recorded at a low level.

l A tape has long, silent intervals.

l A tape is a live recording.

l A tape has very short intervals ofless than 3 seconds.

Interior Comfort

Audio System

6-31


Form No.8U55-EA-05G

Black plate (202,1)

qOperating the Compact Disc (CD) Playerí

CD slotCD play button CD eject buttonLoad button Repeat button

Scan button

Reverse buttonFast-forward buttonRandom button

Track up button

Track down button

Inserting the CD

Insert the CD into the slot, label-side up.The auto-loading mechanism will set theCD and begin play. There will be a shortlapse before play begins while the playerreads the digital signals on the CD.

Playing

Press the CD play button ( ) to startplay when a CD is in the unit.If there isn't a CD in the unit when the CDplay button ( ) is pressed, “NO DISC”will flash on and off.

NOTE

When the load button ( ) is pressed,the CD will load and play even if theCD eject button ( ) had beenpreviously pressed.

Ejecting the CD

Press the CD eject button ( ) to eject theCD.

Fast-forward/Reverse

Press and hold the fast-forward button( ) to advance through a track at highspeed.Press and hold the reverse button ( )to reverse through a track at high speed.

Track search

Press the track up button ( ) once to skipforward to the beginning of the next track.Press the track down button ( ) once toskip back to the beginning of the currenttrack.

6-32

Interior Comfort

íSome models.

Audio System


Form No.8U55-EA-05G

Black plate (203,1)

Music scan

This feature helps to find a program byplaying about the first 10 seconds of eachtrack.

Press the scan button ( ) during playto start scan play operation (the tracknumber will flash).Press the scan button ( ) once againto cancel scan play.

NOTE

If the unit is left in scan, normal playwill resume where scan was selected.

Repeat play

This feature makes it possible to listen toa selection repeatedly.

Press the repeat button ( ) during play.The current selection will be repeated(“RPT” will be displayed).Press the repeat button ( ) once againto cancel repeat play.

Random play

This feature allows the CD player torandomly select the order of the songs.

Press the random button ( ) duringplay. The next selection will be randomlyselected (“RDM” will be displayed).Press the random button ( ) onceagain to cancel random play.

Interior Comfort

Audio System

6-33


Form No.8U55-EA-05G

Black plate (204,1)

qOperating the In-Dash CD Changerí

CD slotCD play button CD eject buttonLoad button Repeat button

Scan button

Reverse buttonFast-forward buttonRandom button

Display button

Track up button

Disc up button

Disc down button

Track down button

Inserting the CD

The CD must be label-side up wheninserting. The auto-loading mechanismwill set the CD and begin play. There willbe a short lapse before play begins whilethe player reads the digital signals on theCD.The disc number and the track numberwill be displayed.

NOTE

A CD cannot be inserted while thedisplay reads “WAIT”. A beepingsound can be heard during this waitingtime. Simultaneously pressing thepower/volume dial and the load button( ) for about 2 seconds will turnthis beeping sound ON or OFF.

Normal insertion

1. Press the load button ( ).

2. When “IN” is displayed, insert the CD.

Inserting CDs into desired tray number

1. Press and hold the load button ( )for about 2 seconds until a beep soundis heard.

2. Press the channel preset button for thedesired tray number while “WAIT” isdisplayed.


NOTE

The CD cannot be inserted to thedesired tray number if the number isalready occupied.

6-34

Interior Comfort

íSome models.

Audio System


Form No.8U55-EA-05G

Black plate (205,1)

Multiple insertion

1. Press and hold the load button ( )for about 2 seconds until a beep soundis heard.

2. Press the load button ( ) againwhile “WAIT” is displayed.

NOTE

If the button is not operated while“WAIT” is displayed, the displaychanges to “IN” and the CD can beinserted.


4. When “IN” is displayed again, insertthe next CD.

NOTE

The first-inserted CD will be playedautomatically when:

l No other CD is inserted within 15seconds after “IN” is displayed.

l The CD trays are full.

Displaying the CD-inserted traynumber

When you want to know the number for aCD-inserted tray, press the display button( ). The tray number will be displayedfor 5 seconds.

Ejecting the CD

Normal ejection

1. Press the CD eject button ( ). Thedisc number and “DISC” “OUT” willbe displayed.

2. Pull out the CD.

NOTE

When the CD is ejected during play, thenext CD will be played automatically.

Ejecting CDs from desired tray number

1. Press and hold the CD eject button ( )for about 2 seconds until a beep soundis heard.The “DISC” “OUT” display flashes.

2. Press the channel preset button for thedesired CD number for less than 5seconds after the beep sound is heard.

3. Pull out the CD.

Multiple ejection

1. Press and hold the CD eject button ( )for about 2 seconds until a beep soundis heard.The “DISC” “OUT” display flashes.

2. Press the CD eject button ( ) againfor less than 5 seconds after the beepsound is heard.

NOTE

If the button is not pressed and about 5seconds have elapsed while “DISC”“OUT” is flashing, CDs areautomatically ejected.

3. Pull out the CD, then the next CD willbe ejected.

Interior Comfort

Audio System

6-35


Form No.8U55-EA-05G

Black plate (206,1)

NOTE

l CDs will be ejected starting with theone with the lowest number.

l All CDs in the tray will be ejectedcontinuously.

l CDs can be ejected when the ignitionswitch is off. Press and hold the CDeject button ( ) for about 2 secondsand all CDs will eject.

Playing

Press the CD play button ( ) to startplay when a CD is in the unit.If there isn't a CD in the unit when the CDplay button ( ) is pressed, “NO DISC”will flash on and off.

Fast-forward/Reverse

Press and hold the fast-forward button( ) to advance through a track at highspeed.Press and hold the reverse button ( )to reverse through a track at high speed.

Track search

Press the track up button ( ) once to skipforward to the beginning of the next track.Press the track down button ( ) once toskip back to the beginning of the currenttrack.

Disc search

Press the disc up button ( ) to skipforward to the beginning of the next CD.Press the disc down button ( ) toskip back to the beginning of the previousCD.

Music scan

This feature helps to find a program byplaying about the first 10 seconds of eachtrack.

Press the scan button ( ) during playto start scan play operation (the tracknumber will flash).Press the scan button ( ) once againto cancel scan play.

NOTE

If the unit is left in scan, normal playwill resume where scan was selected.

Repeat play

This feature makes it possible to listen toa selection repeatedly.

Press the repeat button ( ) during play.The current selection will be repeated(“RPT” will be displayed).Press the repeat button ( ) once againto cancel repeat play.

Random play

This feature allows the CD player torandomly select the order of the songs.

Press the random button ( ) duringplay. The next selection will be randomlyselected (“RDM” will be displayed).Press the random button ( ) onceagain to cancel random play.

6-36

Interior Comfort

Audio System


Form No.8U55-EA-05G

Black plate (207,1)

qError Indications

If you see an error indication on the display, find the cause in the chart. If you cannot clearthe error indication, take the vehicle to an Authorized Mazda Dealer.

Indication Cause Solution

CHECK CD

CD is inserted upside downInsert the CD properly. If the error indicationdoes not disappear, consult an Authorized MazdaDealer

CD is defectiveInsert another CD properly. If the error indicationdoes not disappear, consult an Authorized MazdaDealer

Interior Comfort

Audio System

6-37


Form No.8U55-EA-05G

Black plate (208,1)

Audio Control SwitchOperation (Steering Wheel)í

When the audio unit is turned on,operation of the audio unit from thesteering wheel is possible.

NOTE

Because the audio unit will be turnedoff under the following conditions, theswitches will be inoperable.

l When the ignition switch is turned tothe LOCK position.

l When the power button on the audiounit is pressed and the audio unit isturned off.

l When a cassette tape/CD beingplayed is ejected. (For the In-dashCD changer, when all CDs areejected.)

NOTE

Mazda has installed this system toprevent distraction while driving thevehicle and using audio controls on thedashboard.Always make safe driving your firstpriority.

qAdjusting the Volume

To increase the volume, press the volumebutton ( ).

To decrease the volume, press the volumebutton ( ).

6-38

Interior Comfort

íSome models.

Audio System


Form No.8U55-EA-05G

Black plate (209,1)

qChanging the Source

Press the mode switch ( ) to changethe audio source (FM1 radio> FM2 radio>AM radio> CD player or CD changer>Cassette tape player> SIRIUS1>SIRIUS2> SIRIUS3> cyclical).

NOTE

Cassette tape, CD, CD changer andSIRIUS digital satellite radio modescannot be selected in the followingcases:

l A cassette deck, CD, CD changer, orSIRIUS digital satellite radio unit isnot equipped on the audio system.

l A cassette tape, or CD has not beeninserted.

qSeek Switch

When listening to the radio

Press the seek switch ( , ), the radioswitches to the next/previous storedstation in the order that it was stored(1―6).

Press the seek switch ( , ) for about 2seconds until a beep sound is heard toseek all usable stations at a higher orlower frequency whether programmed ornot.

When playing a cassette tape

Press the seek switch ( ), release, and itwill advance to the next selection.Press the seek switch ( ), release, and itwill repeat the selection being played.

When playing a CD

Press the seek switch ( ) to skip to thenext track.Press the seek switch ( ) to repeat thecurrent track.

Interior Comfort

Audio System

6-39


Form No.8U55-EA-05G

Black plate (210,1)

qMute Switch

Press the mute switch ( ) once to muteaudio, press it again to resume audiooutput.

NOTE

If the ignition switch is turned to theLOCK position with the audio muted,the mute will be canceled.Therefore, when the engine is restarted,the audio is not muted. To mute theaudio again, press the mute switch ( ).

6-40

Interior Comfort

Audio System


Form No.8U55-EA-05G

Black plate (211,1)

Safety CertificationThis CD player is made and tested to meet exacting safety standards. It meets FCCrequirements and complies with safety performance standards of the U.S. Department ofHealth and Human Services.

CAUTIONl This CD player should not be adjusted or repaired by anyone except qualified servicepersonnel.If servicing is required, contact an Authorized Mazda Dealer.

l Use of controls or adjustments or performance of procedures other than thosespecified herein may result in hazardous laser exposure. Never operate the CD playerwith the top case of the unit removed.

l Changes or modifications not expressly approved by the party responsible forcompliance could void the user's authority to operate this equipment.

NOTE

For CD player section:This device complies with part 15 of the FCC Rules. Operation is subject to thefollowing two conditions: (1) This device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may causeundesired operation.

NOTE

This equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in a residential installation. Thisequipment generates, uses, and can radiate radio frequency energy and, if not installedand used in accordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will not occur in aparticular installation.

Interior Comfort

Audio System

6-41


Form No.8U55-EA-05G

Black plate (212,1)

SunvisorsWhen you need a sunvisor, lower it foruse in front or swing it to the side.

Sunvisor

qVanity Mirrors

To use the vanity mirror, lower thesunvisor.

Interior Lights

qIlluminated Entry Systemí

When the illuminated entry systemoperates, the overhead light (switch is inthe DOOR position) turns on for:

l About 30 seconds after the driver'sdoor is unlocked and the ignition key isremoved.

l About 15 seconds after all doors areclosed.

l About 15 seconds after the key isremoved from the ignition with alldoors closed.

The light also turns off when:

l The ignition switch is turned to the ONposition and all doors are closed.

l The driver's door is locked.

NOTE

Battery saverIf any door is left opened, the light goesout after about 5 minutes to save thebattery.The light turns on again when theignition switch is turned to the ONposition, or when any door is openedafter all doors have been closed.

6-42

Interior Comfort

íSome models.

Interior Equipment


Form No.8U55-EA-05G

Black plate (213,1)

qOverhead Lightsí

Front

With moonroof

Without moonroof

SwitchPosition

Front Overhead Lights

Light offl Light on when any door is open

l (With illuminated entry system)Light on or off when theilluminated entry system is on

Rear

SwitchPosition

Rear Overhead Lights

Light offl Light on when any door is open

l (With illuminated entry system)Light on or off when theilluminated entry system is on

Light on

qMap Lightsí

The map lights are switched on or off bypressing the switches.With moonroof

Switches

Interior Comfort

Interior Equipment

6-43íSome models.


Form No.8U55-EA-05G

Black plate (214,1)

Without moonroof

Switches

qLuggage Compartment Light (5Door)

ON

OFF

SwitchPosition

Luggage Compartment Light

Light off

Light on when the liftgate is open

6-44

Interior Comfort

Interior Equipment


Form No.8U55-EA-05G

Black plate (215,1)

Information Display

With trip computer

Without trip computer

Trip computer/Clock Audio displayClimate control display/Ambient temperature display

qInformation Display Functions

The information display has the following functions:

l Clock

l Ambient Temperature Display (Outside Temperature Display)í

l Climate Control Display (Fully Automatic Type)

l Audio Display

l Trip Computerí

Interior Comfort

Interior Equipment

6-45íSome models.


Form No.8U55-EA-05G

Black plate (216,1)

qClock

NOTE

When the trip computer is beingdisplayed, press the CLOCK button tochange the display to the time.

When the ignition switch is in the ACC orON position, the time is displayed.

Time setting

NOTE

For trip computer-equipped vehicles,press the INFO button instead of theSET button when setting the time.

1. Press the CLOCK button until a beepsounds, and “12Hr” and “24Hr” will bedisplayed.

2. Press the SET button to switch between“12Hr” and “24Hr” displays. Theselected display will flash.To select the desired clock setting,press the CLOCK button again whilethe preferred setting is flashing.

3. “Hr. ADJUST” will be displayed next,and the hour portion of the display willflash. Press the SET button to set thehour, then press the CLOCK button.

4. “Min. ADJUST” will be displayednext, and the minutes portion of thedisplay will flash. Press the SET buttonto set the minutes, then press theCLOCK button.

Time resetting

NOTE

For trip computer-equipped vehicles,press the INFO button instead of theSET button when resetting the time.

While the clock is displayed, press theSET button 1.5 seconds or more. Whenthe button is released, a beep will soundand the clock will be reset as follows:(Example)12:01―12:29→12:0012:30―12:59→1:00

NOTE

When the SET button is released, theseconds are reset to “00”.

qAmbient Temperature Displayí

With manual type air conditioner

When the ignition switch is in the ONposition, the ambient temperature isdisplayed.

6-46

Interior Comfort

íSome models.

Interior Equipment


Form No.8U55-EA-05G

Black plate (217,1)

With fully automatic type airconditioner

When the ignition switch is in the ONposition, press the AMB button (page6-11) on the air conditioner control panelto display the ambient temperature.Press the AMB button again to switch thedisplay from ambient temperature to thetemperature set for the air conditioner.

NOTE

l The displayed ambient temperaturemay vary from the actual ambienttemperature depending on thesurrounding area and vehicleconditions.

l Press the Power/volume button andMEDIA button (page 6-24)simultaneously for 5 seconds ormore to switch the display fromFahrenheit to Centigrade or viceversa.

qClimate Control Display (FullyAutomatic Type)

The climate control system status isdisplayed. To operate the climate controlsystem, refer to “Climate Control System”(page 6-2).

qAudio Display

The audio system status is displayed. Tooperate the audio system, refer to“Audio System” (page 6-16).

qTrip Computerí

The trip computer can display thefollowing:

l The current fuel economy.

l The average fuel economy.

l The approximate distance you cantravel on the available fuel.

l The average vehicle speed.

The ignition switch must be in the ONposition.Press the INFO button to change thedisplay mode.

NOTE

When the time is being displayed, pressthe INFO button to change the displayto the trip computer.

If you have any problems with your tripcomputer, consult an Authorized MazdaDealer.

Current fuel economy mode

This mode displays the current fueleconomy by calculating the amount offuel consumption and the distancetraveled.

Current fuel economy will be calculatedand displayed every 2 seconds.

When this mode is selected, CONSUMCUR will be displayed.

Interior Comfort

Interior Equipment

6-47íSome models.


Form No.8U55-EA-05G

Black plate (218,1)

U.S.A.

CANADA

When you've slowed to about 5 km/h (3mph), —— L/100 km (——mpg) will bedisplayed.

Average fuel economy mode

This mode displays the average fueleconomy by calculating the fuelconsumption and the distance traveledsince connecting the battery or resettingthe data.Average fuel economy will be calculatedand displayed every minute.

When this mode is selected, CONSUMAV will be displayed.

U.S.A.

CANADA

To clear the data being displayed, pressthe INFO button for more than 1 second.After pressing the INFO button,—— L/100 km (—— mpg) will be displayed for1 minute before the fuel economy isrecalculated and displayed.

Distance-to-empty mode

This mode displays the approximatedistance you can travel on the remainingfuel based on the fuel economy.

The distance-to-empty will be calculatedand displayed every minutes.

When this mode is selected, REMNG willbe displayed.

6-48

Interior Comfort

Interior Equipment


Form No.8U55-EA-05G

Black plate (219,1)

U.S.A.

CANADA

NOTE

l Even though the distance-to-emptydisplay may indicate a sufficientamount of remaining mileage beforerefueling is required, refuel as soonas possible if the fuel gauge needlenears E or the low fuel warning lightilluminates.

l The display won't change unless youadd more than approximately 20 L(5.3 gal) of fuel.

Average vehicle speed mode

This mode displays the average vehiclespeed by calculating the distance and thetime traveled since connecting the batteryor resetting the data.Average vehicle speed will be calculatedand displayed every 10 seconds.

When this mode is selected, AV will bedisplayed.U.S.A.

CANADA

To clear the data being displayed, pressthe INFO button for more than 1 second.After pressing the INFO button,——km/h (—— mile/h) will be displayed forabout 1 minute before the vehicle speed isrecalculated and displayed.

Interior Comfort

Interior Equipment

6-49


Form No.8U55-EA-05G

Black plate (220,1)

LighterThe ignition switch must be in the ACCor ON position.Press the lighter in and release it. Whenready for use, it automatically pops out.

CAUTIONl Don't touch the metal part of thelighter, you may burn yourself.

l Don't hold the lighter in because itwill overheat.

l Don't use the lighter socket for plug-in accessories such as shavers andcoffee pots. They may damage it orcause electrical failure. Use only agenuine Mazda lighter or theequivalent.

l If the lighter doesn't pop out within30 seconds, remove it to preventoverheating.

Ashtray

CAUTIONDon't use the ashtray for trash. Youmight start a fire.

To use, open the cover.

To remove, open the cover and pull up theashtray.

6-50

Interior Comfort

Interior Equipment


Form No.8U55-EA-05G

Black plate (221,1)

Cup Holder

WARNINGUsing Cup Holder:Using a cup holder to hold hot liquidswhile the vehicle is moving isdangerous. If the contents spill, youcould be scalded. Never use a cupholder to hold hot liquids while thevehicle is moving.

Don't Put Anything Other Than Cupsor Drink cans in Cup Holder:Putting objects other than cups ordrink cans in a cup holder isdangerous.During sudden braking ormaneuvering, occupants could be hitand injured, or objects could bethrown around the vehicle, causinginterference with the driver and thepossibility of an accident. Only use acup holder for cups or drink cans.

CAUTIONTo reduce the possibility of injury in anaccident or a sudden stop, keep cupholders closed when not in use.

To use, open the cover.

Interior Comfort

Interior Equipment

6-51


Form No.8U55-EA-05G

Black plate (222,1)

Bottle HolderBottle holders are on the inside of thefront doors.

Bottle holder

CAUTIONDon't use the bottle holders forcontainers without caps. The contentsmay spill when the door is opened orclosed.

Storage Compartments

WARNINGOpen Storage Boxes:Driving with the storage boxes open isdangerous. To reduce the possibility ofinjury in an accident or a sudden stop,keep the storage boxes closed whendriving.

CAUTIONDon't leave lighters or eyeglasses in thestorage boxes while parked under thesun. A lighter could explode or theplastic material in eyeglasses coulddeform and crack from hightemperature.

qGlove Box

To open the glove box, pull the latchtoward you.If the glove box has a lock, insert the keyand turn it clockwise to lock,counterclockwise to unlock.

Unlock

Lock

6-52

Interior Comfort

Interior Equipment


Form No.8U55-EA-05G

Black plate (223,1)

qCenter Console

To open, pull the lower release catch.

Small items can be placed in the tray ofthe center console lid.To open it, pull the upper release catch.

qCargo Securing Loops (5 Door)

WARNINGNot Securing Luggage and Cargo:Not securing cargo while driving isdangerous as it could move or becrushed during sudden braking or acollision and cause injury. Make sureluggage and cargo is secured beforedriving.

Use the loops in the luggage compartmentto secure cargo with a rope or net. Thetensile strength of the loops is 196 N (20kgf, 44 lbf). Do not apply excessive forceto the loops as it will damage them.

NOTE

To secure cargo with a rope or net, thetrunk board loops can be used in thesame way as the cargo securing loops(page 6-54).

qCargo Sub-Compartment (5 Door)

With flexible floor board

To use the cargo sub-compartment,partially open or remove the trunk boards.

Trunk board

Cargo sub-compartment

Interior Comfort

Interior Equipment

6-53


Form No.8U55-EA-05G

Black plate (224,1)

Without flexible floor board

To use the cargo sub-compartment,remove or lift the trunk board.

Trunk board

Cargo sub-compartment

qFlexible Floor Board (5 Door)í

The luggage compartment can beseparated vertically and/or horizontally,using the trunk board and the trunk boardloops.

CAUTIONMake sure the trunk board is firmlysecured when it is fitted into the trunkboard loops. If it is not firmly secured,it could unexpectedly disengagecausing damage to the trunk boardloops or the trunk board.

NOTE

The trunk board loops can be used inthe same way as the cargo securingloops. The tensile strength of the loopsis 147 N (15 kgf, 33 lbf). Do not applyexcessive force to the trunk board loopsas it will damage them (page 6-53).

Compartment divider loops

Rear trunk board

Front trunk board

To separate vertically

Use the rear trunk board to separate theluggage compartment vertically.

1. Pull the trunk board loops out.

Compartment divider loop

6-54

Interior Comfort

íSome models.

Interior Equipment


Form No.8U55-EA-05G

Black plate (225,1)

2. Insert the trunk board loops into thetrunk board slits.

Front

Trunk board

NOTE

To facilitate insertion of the trunk boardloops into the trunk board slits, firstinsert the bottom of the rear trunk boardinto the groove of the luggage sub-compartment.

GrooveCargo sub-compartment

3. Rock the trunk board to make sure theboard is installed securely.

To separate horizontally

Use the front trunk board to separate theluggage compartment horizontally.

CAUTIONl Do not place heavy objects on thetrunk board or apply excessive forceas they could damage the trunkboard. The permissible weight isabout 5 kg (11 lb).

l Do not use the rear trunk board toseparate the luggage compartmenthorizontally. The rear trunk boardcannot be locked to the trunk boardloops and it could move and causeinjury while the vehicle is moving.

1. Pull the trunk board loops out.

Compartment divider loop

2. Insert the trunk board loop into slit A.

Slit A

Interior Comfort

Interior Equipment

6-55


Form No.8U55-EA-05G

Black plate (226,1)

3. Insert the other trunk board loop intoslit B until a click sound is heard.

Slit B

4. Rock the trunk board to make sure theboard is installed securely.

CAUTIONDo not place or remove luggage via therear passenger seat area while thevehicle is moving. The trunk board orluggage could move and cause injury.

6-56

Interior Comfort

Interior Equipment


Form No.8U55-EA-05G

Black plate (227,1)

7 In Case of an Emergency

Helpful information on what to do in an emergency.

Parking in an Emergency ............................................................. 7-2Parking in an Emergency .......................................................... 7-2

Flat Tire ......................................................................................... 7-3Spare Tire and Tool Storage ...................................................... 7-3Changing a Flat Tire ................................................................. 7-6

Overheating ................................................................................. 7-12Overheating ............................................................................. 7-12

Emergency Starting .................................................................... 7-14Starting a Flooded Engine ....................................................... 7-14Jump-Starting .......................................................................... 7-15Push-Starting ........................................................................... 7-18

Emergency Towing ..................................................................... 7-19Towing Description ................................................................. 7-19Tiedown Hook ........................................................................ 7-20Recreational Towing ............................................................... 7-22

7-1


Form No.8U55-EA-05G

Black plate (228,1)

Parking in an EmergencyThe hazard warning lights should alwaysbe used when you stop on or near aroadway.

The hazard warning lights warn otherdrivers that your vehicle is a traffic hazardand that they must take extreme cautionwhen near it.

Depress the hazard warning flasher and allfour turn signals will flash.

NOTE

l The turn signals don't work when thehazard warning lights are on.

l Check local regulations about the useof hazard warning lights while thevehicle is being towed. They mayforbid it.

7-2

In Case of an Emergency

Parking in an Emergency


Form No.8U55-EA-05G

Black plate (229,1)

Spare Tire and Tool StorageSpare tire and tools are stored in the locations illustrated in the diagram.

Lug wrench Jack handleTiedown eyelet

Jack

Spare tire

4 Door

5 Door

Jack handle

Jack

Spare tire

Lug wrench Tiedown eyelet


Flat Tire

7-3


Form No.8U55-EA-05G

Black plate (230,1)

qJack

To remove the jack

1. Turn the knob and remove the cover.

2. Turn the wing bolt counterclockwise.

To secure the jack

Perform the removal procedure in reverse.

qSpare Tire

Your Mazda has a temporary spare tire.The temporary spare tire is lighter andsmaller than a conventional tire, and isdesigned only for emergency use andshould be used only for VERY shortperiods. Temporary spares shouldNEVER be used for long drives orextended periods.

WARNINGDriving with a Temporary Spare Tireon Ice or Snow:Driving with a spare tire on the front(driving) wheels on ice or snow isdangerous. Handling will be affected.You could lose control of the vehicleand have an accident. Put the sparetire on the rear axle and move aregular tire to the front.

CAUTIONl When using the temporary spare tire,driving stability may decreasecompared to when using only theconventional tire.Drive carefully.

l To avoid damage to the temporaryspare or to the vehicle, observe thefollowing precautions:

l Don't exceed 80 km/h (50 mph).l Avoid driving over obstacles.

Also, don't drive through anautomatic car wash. This tire'sdiameter is smaller than aconventional tire's, so the groundclearance is reduced about 25 mm(1 in).

l Don't use a tire chain on this tirebecause it won't fit properly.

l Don't use your temporary spareon any other vehicle; it has beendesigned only for your Mazda.

l Use only one temporary spare tireon your vehicle at the same time.

7-4


Flat Tire


Form No.8U55-EA-05G

Black plate (231,1)

NOTE

(With Tire Pressure MonitoringSystem)A tire pressure sensor is not installed tothe temporary spare tire. The warninglight will flash continuously while thetemporary spare tire is being used (page5-23).

To remove the spare tire

(4 Door)

1. Remove the trunk mat and trunk board.

2. Turn the tire hold-down boltcounterclockwise with the lug wrench.

(5 Door)

1. Remove the trunk mat, trunk board andcargo sub-compartment.

2. Turn the tire hold-down boltcounterclockwise with the lug wrench.


Flat Tire

7-5


Form No.8U55-EA-05G

Black plate (232,1)

Changing a Flat Tire

NOTE

If the following occurs while driving, itcould indicate a flat tire.

l Steering becomes difficult.

l The vehicle begins to vibrateexcessively.

l The vehicle pulls in one direction.

If you have a flat tire, drive slowly to alevel spot that is well off the road and outof the way of traffic to change the tire.Stopping in traffic or on the shoulder of abusy road is dangerous.

WARNINGJacking a Vehicle:Changing a tire is dangerous if notdone properly. The vehicle can slip offthe jack and seriously injure someone.Be sure to follow the directions forchanging a tire, and never get under avehicle that is supported only by ajack.

Passenger in Vehicle Supported by aJack:Allowing someone to remain in avehicle supported by a jack isdangerous. The occupant could causethe vehicle to fall resulting in seriousinjury. Never allow anyone inside avehicle supported by a jack.

CAUTION(With Tire Pressure MonitoringSystem)The wheels equipped on your Mazdaare specially designed for installation ofthe tire pressure sensors. Do not usenon-genuine wheels, otherwise it maynot be possible to install the tirepressure sensors.

NOTE

l Make sure the jack is well lubricatedbefore using it.

(With Tire Pressure MonitoringSystem)

l Be sure to register the tire pressuresensor ID signal code whenever tiresor wheels are changed (page 5-25).

1. Park on a level surface off the right-of-way and firmly set the parking brake.

2. Put a vehicle with an automatictransaxle in Park (P), a manualtransaxle in Reverse (R) or 1, and turnoff the engine.

3. Turn on the hazard warning flasher.

4. Have everyone get out of the vehicleand away from the vehicle and traffic.

5. Remove the jack, tool, and spare tire(page 7-3).

7-6


Flat Tire


Form No.8U55-EA-05G

Black plate (233,1)

6. Block the wheel diagonally oppositethe flat tire. When blocking a wheel,place a tire block both in front andbehind the tire.

NOTE

When blocking a tire, use rocks orwood blocks of sufficient size to holdthe tire in place.

qRemoving a Flat Tire

1. If your vehicle is equipped with awheel cover, pry off the wheel coverwith the beveled end of the lug wrench.

NOTE

Force the end of the lug wrench firmlybetween wheel and cover, or removalwill be difficult.

CAUTIONThere is a valve-stem mark inside thewheel cap. When installing the wheelcap, align this mark with the tire's valvestem.Damage could occur during installationif the wheel cover is not properlyaligned.

2. Loosen the lug nuts by turning themcounterclockwise one turn each, butdon't remove any lug nuts until the tirehas been raised off the ground.


Flat Tire

7-7


Form No.8U55-EA-05G

Black plate (234,1)

3. Place the jack under the jackingposition closest to the tire beingchanged.

Jacking position

WARNINGIncorrect Jacking Position:Attempting to jack the vehicle inpositions other than thoserecommended in this manual isdangerous. The vehicle could slip offthe jack and seriously injure or evenkill someone. Use only the front andrear jacking positions recommendedin this manual.

Improper Jack:Using a jack that isn't designed foryour Mazda is dangerous. The vehiclecould slip off the jack and seriouslyinjure someone. Use only the jackprovided with your Mazda.

Placing Objects Under the Jack:Jacking the vehicle with an objectunder the jack is dangerous. The jackcould slip and someone could beseriously injured by the jack or thefalling vehicle. Never place objectsunder the jack.

4. Insert the jack handle into the jack.

5. Turn the jack handle clockwise andraise the vehicle high enough so thatthe spare tire can be installed. Beforeremoving the lug nuts, make sure yourMazda is firmly in position and that itcannot slip or move.

6. Remove the lug nuts by turning themcounterclockwise; then remove thewheel and center cap.

7-8


Flat Tire


Form No.8U55-EA-05G

Black plate (235,1)

qLocking Lug Nutsí

If your vehicle has optional antitheftwheel lug nuts, one on each wheel willlock the tires and you must use a specialkey to unlock them. This key is attachedto the lug wrench and is stored with thespare tire. Register them with the lockmanufacturer by filling out the cardprovided in the glove box and mailing itin the accompanying envelope. If you losethis key, consult an Authorized MazdaDealer or use the lock manufacturer'sorder form, which is with the registrationcard.

Special keyAntitheft lug nut

To remove an antitheft lug nut

1. Obtain the key for the antitheft lug nut.

2. Place the key on top of the nut, and besure to hold the key square to it. If youhold the key at an angle, you maydamage both key and nut. Don't use apower impact wrench.

3. Place the lug wrench on top of the keyand apply pressure. Turn the wrenchcounterclockwise.

To install the nut

1. Place the key on top of the nut, and besure to hold the key square to it. If youhold the key at an angle, you maydamage both key and nut. Don't use apower impact wrench.

2. Place the lug wrench on top of the key,apply pressure, and turn it clockwise.

qMounting the Spare Tire

1. Remove dirt and grime from themounting surfaces of the wheel andhub, including the hub bolts, with acloth.

WARNINGRemoving Dirt and Grime fromWheels, Hubs and Hub Bolts:When changing or replacing a tire,not removing dirt and grime from themounting surfaces of the wheel, huband hub bolts is dangerous. The lugnuts could loosen while driving andcause the tire to come off, resulting inan accident. Make sure the mountingsurfaces of the wheel, hub and lugnuts are clean before changing orreplacing tires.


Flat Tire

7-9íSome models.


Form No.8U55-EA-05G

Black plate (236,1)

2. Mount the spare tire.

3. Install the lug nuts with the bevelededge inward; tighten them by hand.

WARNINGDon't Apply Oil or Grease to LugNuts, Bolts:Applying oil or grease to lug nuts andbolts is dangerous. The lug nuts couldloosen while driving and cause the tireto come off, resulting in an accident.In addition, lug nuts and bolts couldbe damaged if tightened more thannecessary. Do not apply oil or greaseto lug nuts and bolts and do nottighten the lug nuts beyond therecommended tightening torque.

4. Turn the jack handle counterclockwiseand lower the vehicle. Use the lugwrench to tighten the nuts in the ordershown.

If you're unsure of how tight the nutsshould be, have them inspected at anAuthorized Mazda Dealer.

Nut tightening torque

N·m (kgf·m, ft·lbf) 88―117 (9―11, 65―93)

7-10


Flat Tire


Form No.8U55-EA-05G

Black plate (237,1)

WARNINGLoose Lug Nuts:Improperly or loosely tightened lugnuts are dangerous. The wheel couldwobble or come off. This could resultin loss of vehicle control and cause aserious accident. Always securely andcorrectly tighten the lug nuts.

Metric Studs and Lug Nuts:Because the wheel studs and lug nutson your Mazda have metric threads,using a non-metric nut is dangerous.On a metric stud, it would not securethe wheel and would damage the stud,which could cause the wheel to slip offand cause an accident. Be sure toreinstall the same nuts you removed orreplace them with metric nuts of thesame configuration.

5. Store the damaged tire, using the tirehold-down bolt to hold it in place.

Tire clamp

Tire hold-down bolt

6. Check the inflation pressure. Refer tothe specification charts on page 10-7.

7. Have the flat tire repaired or replacedas soon as possible.

WARNINGIncorrect Tire Air Pressure:Driving on tires with incorrect airpressure is dangerous. Tires withincorrect pressure could affecthandling and result in an accident.Don't drive with any tires that haveincorrect air pressure. When youcheck the regular tires' air pressure,check the spare tire, too.

NOTE

(With Tire Pressure MonitoringSystem)A tire pressure sensor is not installed tothe temporary spare tire. The warninglight will flash continuously while thetemporary spare tire is being used (page5-23).

NOTE

To prevent the jack and tool fromrattling, store them properly.


Flat Tire

7-11


Form No.8U55-EA-05G

Black plate (238,1)

OverheatingIf the temperature gauge indicatesoverheating, the vehicle loses power, oryou hear a loud knocking or pingingnoise, the engine is probably too hot.

WARNING

Cooling Fan and EngineInspection:Inspecting the engine with the ignitionswitch in the ON position isdangerous. The cooling fan could turnon unexpectedly even when the engineisn't running. You could be seriouslyinjured by the fan. Turn the ignitionswitch off and remove the key from theignition switch when you inspect theengine.

Cooling System Cap:When the engine and radiator are hot,scalding coolant and steam may shootout under pressure and cause seriousinjury. Don't remove the coolingsystem cap when the engine andradiator are hot.

Steam from Overheated Engine:Steam from an overheated engine isdangerous. The escaping steam couldseriously burn you. Open the hoodONLYafter steam is no longerescaping from the engine.

If the temperature gauge indicatesoverheating:

1. Drive safely to the side of the road andpark off the right-of-way.

2. Put a vehicle with an automatictransaxle in park (P), a manualtransaxle in neutral.Apply the parking brake.

3. Turn off the air conditioner.

4. Check whether coolant or steam isescaping from under the hood or fromthe engine compartment.

If steam is coming from the enginecompartment:Don't go near the front of the vehicle.Stop the engine.Wait until the steam dissipates, thenopen the hood and start the engine.

If neither coolant nor steam isescaping:Open the hood and idle the engine untilit cools.

CAUTIONIf the cooling fan does not operatewhile the engine is running, the enginetemperature will increase. Stop theengine and call an Authorized MazdaDealer.

5. Make sure the cooling fan is operating,then turn off the engine after thetemperature has decreased.

6. When cool, check the coolant level.If it's low, look for coolant leaks fromthe radiator and hoses.

7-12


Overheating


Form No.8U55-EA-05G

Black plate (239,1)

If you find a leak or other damage, or ifcoolant is still leaking:Stop the engine and call an AuthorizedMazda Dealer.

If you find no problems, the engine iscool, and no leaks are obvious:Carefully add coolant as required (page8-21).

CAUTIONIf the engine continues to overheat orfrequently overheats, have the coolingsystem inspected. The engine could beseriously damaged unless repairs aremade. Consult an Authorized MazdaDealer.


Overheating

7-13


Form No.8U55-EA-05G

Black plate (240,1)

Starting a Flooded EngineIf the engine fails to start, it may beflooded (excessive fuel in the engine).

Follow this procedure:

1. Depress the accelerator all the way andhold it there.

2. Turn the ignition switch to the STARTposition and hold it there―for up to 10seconds. If the engine starts, release thekey and accelerator immediatelybecause the engine will suddenly revup.

3. If the engine fails to start, crank itwithout depressing the accelerator―forup to 10 seconds.

7-14


Emergency Starting


Form No.8U55-EA-05G

Black plate (241,1)

Jump-StartingJump-starting is dangerous if done incorrectly. So follow the procedure carefully. If youfeel unsure about jump-starting, we strongly recommend that you have a competent servicetechnician do the work.

WARNING

Follow These Precautions Carefully:To ensure safe and correct handling of the battery, read the following precautionscarefully before using the battery or inspecting it.

Eye Protection:Working without eye protection is dangerous. Battery fluid contains SULFURICACID which could cause blindness if splashed into your eyes. Also, hydrogen gasproduced during normal battery operation, could ignite and cause the battery toexplode. Always wear eye protection when working near the battery.

Spilled Battery Fluid:Spilled battery fluid is dangerous.Battery fluid contains SULFURIC ACID which could cause serious injuries if it getsin eyes, skin or clothing. If this happens, immediately flush your eyes with water for15 minutes or wash your skin thoroughly and get medical attention. Wear eyeprotection and protective gloves to prevent contact with battery fluid.

Children and Batteries:Allowing children to play near batteries is dangerous. Battery fluid could causeserious injuries if it gets in the eyes or on the skin. Always keep batteries out of thereach of children.


Emergency Starting

7-15


Form No.8U55-EA-05G

Black plate (242,1)

WARNING

Keep Flames Away:Flames and sparks near open battery cells are dangerous. Hydrogen gas, producedduring normal battery operation, could ignite and cause the battery to explode. Anexploding battery can cause serious burns and injuries. Keep all flames includingcigarettes and sparks away from open battery cells. When working near a battery, donot allow metal tools to contact the positive ( ) or negative ( ) terminal of thebattery. Do not allow the positive ( ) terminal to contact the vehicle body.

Battery-Related Explosion:Flames and sparks near open battery cells are dangerous. Hydrogen gas, producedduring normal battery operation, could ignite and cause the battery to explode. Anexploding battery can cause serious burns and injuries. Keep all flames, includingcigarettes, and sparks away from open battery cells.

Low Fluid Level or Frozen Battery:Jump-starting a frozen battery or one with a low fluid level is dangerous. It mayrupture or explode, causing serious injury.Don't jump-start a frozen battery or one with a low fluid level.

Connecting to Negative Terminal:Connecting the end of the second cable to the negative ( ) terminal of the dischargedbattery is dangerous.A spark could cause the gas around the battery to explode and injure someone.Connect the negative cable to a good ground point away from the battery.

Connecting Jumper Cable to Moving Parts:Connecting a jumper cable near or to moving parts (cooling fans, belts) is dangerous.The cable could get caught when the engine starts and cause serious injury. Neverconnect a jumper cable to or near any part that moves.

CAUTIONUse only a 12 V booster system. You can damage a 12 V starter, ignition system, andother electrical parts beyond repair with a 24 V power supply (two 12 V batteries inseries or a 24 V motor generator set).

7-16


Emergency Starting


Form No.8U55-EA-05G

Black plate (243,1)

Discharged battery

Jumper cables

Connect cables in numerical order and disconnect in reverse order.

Booster battery

1. Remove the battery cover from its frontside.

Battery cover

2. Make sure the booster battery is 12 Vand that its negative terminal isgrounded.

3. If the booster battery is in anothervehicle, don't allow both vehicles totouch. Turn off the engine of thevehicle with the booster battery and allunnecessary electrical loads in bothvehicles.

4. Connect the jumper cables in the exactsequence as in the illustration.

l Connect one end of a cable to thepositive terminal on the dischargedbattery (1).

l Attach the other end to the positiveterminal on the booster battery (2).

l Connect one end of the other cableto the negative terminal of thebooster battery (3).

l Connect the other end to a solid,stationary, exposed metallic point(for example, the right hand sideengine mounting bolt) away fromthe discharged battery (4).

5. Start the engine of the booster vehicleand run it a few minutes. Then start theengine of the other vehicle.

6. When finished, carefully disconnect thecables in the reverse order described inthe illustration.


Emergency Starting

7-17


Form No.8U55-EA-05G

Black plate (244,1)

NOTE

Verify that the covers are securelyinstalled.

Push-Starting

WARNINGTowing a Vehicle to Start It:Towing a vehicle to start it isdangerous. The vehicle being towedcould surge forward when its enginestarts, causing the two vehicles tocollide. The occupants could beinjured. Never tow a vehicle to start it.

You can't start a vehicle with an automatictransaxle by pushing it.

CAUTIONDo not push-start a vehicle that has amanual transaxle. It can damage theemission control system.

7-18


Emergency Starting


Form No.8U55-EA-05G

Black plate (245,1)

Towing DescriptionWe recommend that towing be done onlyby an Authorized Mazda Dealer or acommercial tow-truck service.

Proper lifting and towing are necessary toprevent damage to the vehicle.Government and local laws must befollowed.

A towed vehicle usually should have itsfront wheels off the ground. If excessivedamage or other conditions prevent this,use wheel dollies.

Wheel dollies

When towing with the rear wheels on theground, release the parking brake.

CAUTIONDon't tow the vehicle pointed backwardwith driving wheels on the ground. Thismay cause internal damage to thetransaxle.

CAUTIONDon't tow with sling-type equipment.This could damage your vehicle. Usewheel-lift or flatbed equipment.


Emergency Towing

7-19


Form No.8U55-EA-05G

Black plate (246,1)

CAUTIONDo not use the hooks under the rearbumper for towing and tying down, asthey cannot hold the load and it willdamage the bumper.

Hooks

Tiedown Hook

CAUTIONDon't use the tiedown hook under therear for towing.It is designed ONLY for tying down thevehicle when it's being transported.Using it for towing will damage thebumper.

NOTE

When towing with chain or cable, wrapthe chain or cable with a soft cloth nearthe bumper to prevent damage to thebumper.

qTiedown Hook-Front

1. Remove the tiedown eyelet and the lugwrench from the trunk (page 7-3).

2. Wrap a flathead screwdriver or similartool with a soft cloth to preventdamage to the bumper and open thecap located on the front bumper.

7-20


Emergency Towing


Form No.8U55-EA-05G

Black plate (247,1)

CAUTIONThe cap cannot be completely removed.Do not use excessive force as it maydamage the cap or scratch the paintedbumper surface.

3. Securely install the tiedown eyeletusing the lug wrench.

4. Hook the tying rope to the tiedowneyelet.

CAUTIONIf the tiedown eyelet is not securelytightened, it may loosen or disengagefrom the bumper when tying down thevehicle. Make sure that the tiedowneyelet is securely tightened to thebumper.


Emergency Towing

7-21


Form No.8U55-EA-05G

Black plate (248,1)

Recreational TowingAn example of “recreational towing” istowing your vehicle behind a motorhome.The transaxle is not designed for towingthis vehicle on all 4 wheels.When doing recreational towing refer to“Towing Description” (page 7-19) and“Tiedown Hook” (page 7-20) andcarefully follow the instructions.

7-22


Emergency Towing


Form No.8U55-EA-05G

Black plate (249,1)

8 Maintenance and Care

How to keep your Mazda in top condition.

Introduction .................................................................................. 8-2Introduction ............................................................................... 8-2

Scheduled Maintenance ................................................................ 8-3Scheduled Maintenance (USA, Canada, and Puerto Rico) ....... 8-3Scheduled Maintenance (Mexico) ............................................. 8-8

Owner Maintenance ................................................................... 8-15Owner Maintenance Schedule ................................................ 8-15Owner Maintenance Precautions ............................................. 8-16Engine Compartment Overview .............................................. 8-17Engine Oil ............................................................................... 8-18Engine Coolant ....................................................................... 8-21Brake/Clutch Fluid .................................................................. 8-23Power Steering Fluid ............................................................... 8-24Automatic Transaxle Fluid (ATF) ........................................... 8-25Washer Fluid ........................................................................... 8-27Body Lubrication .................................................................... 8-28Air Filter .................................................................................. 8-29Wiper Blades ........................................................................... 8-30Battery ..................................................................................... 8-34Tires ........................................................................................ 8-37Light Bulbs ............................................................................. 8-42Fuses ....................................................................................... 8-52

Appearance Care ........................................................................ 8-59How to Minimize Environmental Paint Damage .................... 8-59Exterior Care ........................................................................... 8-61Interior Care ............................................................................ 8-64

8-1


Form No.8U55-EA-05G

Black plate (250,1)

IntroductionBe extremely careful and prevent injury to yourself and others or damage to your vehiclewhen using this manual for inspection and maintenance.

If you're unsure about any procedure it describes, we strongly urge you to have a reliableand qualified service shop perform the work, preferably an Authorized Mazda Dealer.

Factory-trained Mazda technicians and genuine Mazda parts are best for your vehicle.Without this expertise and the parts that have been designed and made especially for yourMazda, inadequate, incomplete, and insufficient servicing may result in problems. Thiscould lead to vehicle damage or an accident and injuries.

For expert advice and quality service, consult an Authorized Mazda Dealer.

The owner should retain evidence that proper maintenance has been performed asprescribed.

Claims against the warranty resulting from lack of maintenance, as opposed to defectivematerials or authorized Mazda workmanship, will not be honored.

Any auto repair shop using parts equivalent to your Mazda's original equipment mayperform maintenance. But we recommend that it always be done by an AuthorizedMazda Dealer using genuine Mazda parts.

8-2

Maintenance and Care

Introduction


Form No.8U55-EA-05G

Black plate (251,1)

Scheduled Maintenance (USA, Canada, and Puerto Rico)Follow Schedule 1 if the vehicle is operated mainly where none of the following conditionsapply.If any do apply, follow Schedule 2 (Canada and Puerto Rico residents follow Schedule 2).

l Repeated short-distance driving

l Driving in dusty conditions

l Driving with extended use of brakes

l Driving in areas where salt or other corrosive materials are being used

l Driving on rough or muddy roads

l Extended periods of idling or low-speed operation

l Driving for long periods in cold temperatures or extremely humid climates

NOTE

After the prescribed period, continue to follow the described maintenance at therecommended intervals.


Scheduled Maintenance

8-3


Form No.8U55-EA-05G

Black plate (252,1)

qSchedule 1

Maintenance Interval

Number of months or kilometers (miles), whichever comes first

Months 6 12 18 24 30 36 42 48

×1000 km 12 24 36 48 60 72 84 96

×1000 miles 7.5 15 22.5 30 37.5 45 52.5 60

ENGINE

Engine valve clearanceAudible inspect every 120,000 km (75,000 miles), if noisy,

adjust

Drive belts (tension) I

Engine oil R R R R R R R R

Engine oil filter R R R R R R R R

COOLING SYSTEM

Cooling system I I

Engine coolantFL22 type*1

Replace at first 192,000 km (120,000 miles) or 10 years ;after that, every 96,000 km (60,000 miles) or 5 years

OthersReplace at first 96,000 km (60,000 miles) or 4 years ;

after that, every 2 years

FUEL SYSTEM

Air filter R

Fuel lines and hoses*2 I I

Hoses and tubes for emission*2 I

IGNITION SYSTEM

Spark plugs Replace every 120,000 km (75,000 miles)

CHASSIS and BODY

Brake lines, hoses and connections I I

Disc brakes I I I I

Tire (rotation) Rotate every 12,000 km (7,500 miles)

Steering operation and linkages I I

Front and rear suspension and ball joints I I

Driveshaft dust boots I I

Exhaust system and heat shields Inspect every 72,000 km (45,000 miles) or 60 months

All locks and hinges L L L L L L L L

8-4




Form No.8U55-EA-05G

Black plate (253,1)



Months 6 12 18 24 30 36 42 48

×1000 km 12 24 36 48 60 72 84 96

×1000 miles 7.5 15 22.5 30 37.5 45 52.5 60

AIR CONDITIONER SYSTEM (if installed)

Cabin air filter Replace every 40,000 km (25,000 miles) or 24 months

Chart symbols

I: Inspect and repair, clean, adjust, or replace if necessary.R: ReplaceL: Lubricate

Remarks

*1 Use FL22 type coolant in vehicles with the inscription “FL22” on the radiator cap itself or the surroundingarea. Use FL22 when replacing the coolant.

*2 According to state/provincial and federal regulations, failure to perform maintenance on these items will notvoid your emissions warranties. However, Mazda recommends that all maintenance services be performed atthe recommended time or mileage/kilometer period to ensure long-term reliability.



8-5


Form No.8U55-EA-05G

Black plate (254,1)

qSchedule 2



Months 4 8 12 16 20 24 28 32 36 40 44 48

×1000 km 8 16 24 32 40 48 56 64 72 80 88 96

×1000 miles 5 10 15 20 25 30 35 40 45 50 55 60

ENGINE

Engine valve clearanceAudible inspect every 120,000 km (75,000 miles), if noisy,

adjust


Engine oilPuerto Rico Replace every 5,000 km (3,000 miles) or 3 months

Others R R R R R R R R R R R R

Engine oil filter R R R R R R R R R R R R

COOLING SYSTEM

Cooling system I I

Engine coolantFL22 type*1

Replace at first 192,000 km (120,000 miles) or 10 years ;after that, every 96,000 km (60,000 miles) or 5 years

OthersReplace at first 96,000 km (60,000 miles) or 4 years ;

after that, every 2 years

Engine coolant level I I I I I I I I I I I I

FUEL SYSTEM

Air filterPuerto Rico R R

Others R

Fuel lines and hoses*2 I I

Hoses and tubes for emission*2 I

IGNITION SYSTEM

Spark plugs Replace every 120,000 km (75,000 miles)

ELECTRICAL SYSTEM

Function of all lights I I I I I I I I I I I I

CHASSIS and BODY

Brake lines, hoses and connections I I

Brake and clutch fluid level I I I I I I I I I I I I

Disc brakes I I I I

Tire (rotation) Rotate every 8,000 km (5,000 miles)

Tire inflation pressure and tire wear I I I I I I I I I I I I

Steering operation and linkages I I

Power steering fluid level I I I I I I I I I I I I

Front and rear suspension and ball joints I I

Driveshaft dust boots I I

Exhaust system and heat shields Inspect every 72,000 km (45,000 miles) or 60 months

All locks and hinges L L L L L L L L L L L L

Washer fluid level I I I I I I I I I I I I

8-6




Form No.8U55-EA-05G

Black plate (255,1)



Months 4 8 12 16 20 24 28 32 36 40 44 48

×1000 km 8 16 24 32 40 48 56 64 72 80 88 96

×1000 miles 5 10 15 20 25 30 35 40 45 50 55 60


Cabin air filter Replace every 40,000 km (25,000 miles) or 24 months

Chart symbols


Remarks


*2 According to state/provincial and federal regulations, failure to perform maintenance on these items will notvoid your emissions warranties. However, Mazda recommends that all maintenance services be performed atthe recommended time or mileage/kilometer period to ensure long-term reliability.



8-7


Form No.8U55-EA-05G

Black plate (256,1)

Scheduled Maintenance (Mexico)Follow Schedule 1 if the vehicle is operated mainly where none of the following conditionsapply.If any do apply, follow Schedule 2.

l Repeated short-distance driving

l Driving in dusty conditions

l Driving with extended use of brakes

l Driving in areas where salt or other corrosive materials are being used

l Driving on rough or muddy roads

l Extended periods of idling or low-speed operation

l Driving for long periods in cold temperatures or extremely humid climates

NOTE

After the prescribed period, continue to follow the described maintenance at therecommended intervals.

8-8




Form No.8U55-EA-05G

Black plate (257,1)

qSchedule 1


Number of months or kilometers, whichever comes first

Months 6 12 18 24 30 36 42 48 54 60 66 72

×1000 km 10 20 30 40 50 60 70 80 90 100 110 120

ENGINE

Engine valve clearance Audible inspect every 120,000 km, if noisy, adjust

Drive belts (tension) I I I

Engine oil R R R R R R R R R R R R


COOLING SYSTEM

Cooling system I I I

Engine coolantFL22 type *1 Replace at first 190,000 km or 10 years; after that, every

60,000 km or 3 years

Others Replace every 40,000 km or 2 years

FUEL SYSTEM

Air filter R R R R R R

Fuel lines and hoses I *2 I *2 I

Hoses and tubes for emission I *2 I *2 I

Fuel filter R R R

IGNITION SYSTEM

Spark plugs Replace every 60,000 km

CHASSIS and BODY

Brake lines, hoses and connections I I I I I I

Brake fluid level I I I I I I I I I

Brake fluid R R R

Disc brakes I I I I I I I I I I I I

Tire (Rotation) Rotate every 10,000 km or 6 months

Tire inflation pressure and tire wear I I I I I I I I I I I I

Steering operation and linkages I I I I I I I I I I I I

Power steering fluid level I I I I I I I I I I I I

Front and rear suspension and ball joints I I I I I I I I I I I I

Driveshaft dust boots I I I I I I

Exhaust system and heat shields I I I I I I

All locks and hinges L L L L L L L L L L L L

Washer fluid level I I I I I I I I I I I I



8-9


Form No.8U55-EA-05G

Black plate (258,1)



Months 6 12 18 24 30 36 42 48 54 60 66 72

×1000 km 10 20 30 40 50 60 70 80 90 100 110 120


Cabin air filter R R R

Chart symbols:


Remarks:


*2 According to state/provincial and federal regulations, failure to perform maintenance on these items will notvoid your emissions warranties. However, Mazda recommends that all maintenance services be performed atthe recommended time or kilometer period to ensure long-term reliability.

8-10




Form No.8U55-EA-05G

Black plate (259,1)

qSchedule 2



Months 3 6 9 12 15 18 21 24 27 30 33 36

×1000 km 5 10 15 20 25 30 35 40 45 50 55 60

ENGINE





COOLING SYSTEM

Cooling system I

Engine coolantFL22 type *1 Replace at first 190,000 km or 10 years;

after that, every 60,000 km or 3 years



FUEL SYSTEM

Air filter C R C R C R

Fuel lines and hoses I *2

Hoses and tubes for emission I *2

Fuel filter R

IGNITION SYSTEM


ELECTRICAL SYSTEM


CHASSIS and BODY

Brake lines, hoses and connections I I I

Brake fluid level I I I I I

Brake fluid R

Disc brakes I I I I I I

Tire (rotation) Rotate every 10,000 km or 6 months

Tire inflation pressure and tire wear I I I I I I

Steering operation and linkages I I I I I I

Power steering fluid level I I I I I I

Front and rear suspension and ball joints I I I I I I

Driveshaft dust boots I I I

Exhaust system and heat shields I I I

All locks and hinges L L L L L L

Washer fluid level I I I I I I



8-11


Form No.8U55-EA-05G

Black plate (260,1)



Months 3 6 9 12 15 18 21 24 27 30 33 36

×1000 km 5 10 15 20 25 30 35 40 45 50 55 60



Chart symbols:

I: Inspect and repair, clean, adjust, or replace if necessary.R: ReplaceL: LubricateC: Clean

Remarks:



8-12




Form No.8U55-EA-05G

Black plate (261,1)

(Cont.)



Months 39 42 45 48 51 54 57 60 63 66 69 72

×1000 km 65 70 75 80 85 90 95 100 105 110 115 120

ENGINE


Drive belts (tension) I I



COOLING SYSTEM

Cooling system I I

Engine coolantFL22 type *1 Replace at first 190,000 km or 10 years; after that, every

60,000 km or 3 years



FUEL SYSTEM

Air filter C R C R C R

Fuel lines and hoses I *2 I

Hoses and tubes for emission I *2 I

Fuel filter R R

IGNITION SYSTEM


ELECTRICAL SYSTEM


CHASSIS and BODY

Brake lines, hoses and connections I I I

Brake fluid level I I I I

Brake fluid R R

Disc brakes I I I I I I

Tire (rotation) Rotate every 10,000 km or 6 months

Tire inflation pressure and tire wear I I I I I I

Steering operation and linkages I I I I I I

Power steering fluid level I I I I I I

Front and rear suspension and ball joints I I I I I I

Driveshaft dust boots I I I

Exhaust system and heat shields I I I

All locks and hinges L L L L L L

Washer fluid level I I I I I I



8-13


Form No.8U55-EA-05G

Black plate (262,1)



Months 39 42 45 48 51 54 57 60 63 66 69 72

×1000 km 65 70 75 80 85 90 95 100 105 110 115 120



Chart symbols:

I: Inspect and repair, clean, adjust, or replace if necessary.R: ReplaceL: LubricateC: Clean

Remarks:



8-14




Form No.8U55-EA-05G

Black plate (263,1)

Owner Maintenance ScheduleThe owner or a qualified service technician should make these vehicle inspections at theindicated intervals to ensure safe and dependable operation.

Bring any problem to the attention of an Authorized Mazda Dealer or qualified servicetechnician as soon as possible.

qWhen Refueling

l Brake and clutch fluid level (page 8-23)

l Engine coolant level (page 8-21)

l Engine oil level (page 8-19)

l Washer fluid level (page 8-27)

qAt Least Monthly

Tire inflation pressures (page 8-37)

qAt Least Twice a Year (For Example, Every Spring and Fall)

l Automatic transaxle fluid level (page 8-25)

l Power steering fluid level (page 8-24)

You can do the following scheduled maintenance items if you have some mechanicalability and a few basic tools and if you closely follow the directions in this manual.

l Air filter (page 8-29)

l Engine coolant (page 8-21)

l Engine oil (page 8-19)


Owner Maintenance

8-15


Form No.8U55-EA-05G

Black plate (264,1)

Owner Maintenance PrecautionsImproper or incomplete service may result in problems. This section gives instructions onlyfor items that are easy to perform.

As explained in the Introduction (page 8-2), several procedures can be done only by aqualified service technician with special tools.

Improper owner maintenance during the warranty period may affect warranty coverage.For details, read the separate Mazda Warranty statement provided with the vehicle. Ifyou're unsure about any servicing or maintenance procedure, have it done by anAuthorized Mazda Dealer.

There are strict environmental laws regarding the disposal of waste oil and fluids. Pleasedispose of your waste properly and with due regard to the environment.

We recommend that you entrust the oil and fluid changes of your vehicle to an AuthorizedMazda Dealer.

WARNINGMaintenance Procedures:Performing maintenance work on a vehicle is dangerous if not done properly. You canbe seriously injured while performing some maintenance procedures. If you lacksufficient knowledge and experience or the proper tools and equipment to do the work,have it done by a qualified technician.

Running the Engine:Working under the hood with the engine running is dangerous. It becomes even moredangerous when you wear jewelry or loose clothing.Either can become entangled in moving parts and result in injury.Therefore, if you must run the engine while working under the hood, make certainthat you remove all jewelry (especially rings, bracelets, watches, and necklaces) andall neckties, scarves, and similar loose clothing before getting near the engine orcooling fan which may turn on unexpectedly.

Electrical Fan and Engine Inspection:Inspecting the engine with the ignition switch in the ON position is dangerous. Thecooling fan could come on unexpectedly even when the engine isn't running. Youcould be seriously injured by the fan. Turn the ignition switch off and remove the keyfrom the ignition switch when you inspect the engine.

8-16


Owner Maintenance


Form No.8U55-EA-05G

Black plate (265,1)

Engine Compartment Overview

Fuse block

Air filter

BatteryEngine oil-filler cap

Main fuse

Automatic transaxle fluid-level dipstick (Only for automatic transaxle)

Brake/Clutch fluid reservoir

Engine coolant reservoir

Engine oil dipstick

Power steering fluid reservoir

Windshield washer fluid reservoir


Owner Maintenance

8-17


Form No.8U55-EA-05G

Black plate (266,1)

Engine Oil

qRecommended Oil

Use SAE 5W-20 engine oil.Oil container labels provide importantinformation.A chief contribution this type of oil makesto fuel economy is reducing the amount offuel necessary to overcome enginefriction.

U.S.A. and CANADA

(ILSAC)

Only use oils “Certified For GasolineEngines” by the American PetroleumInstitute (API). An oil with this trademarksymbol conforms to the current engineand emission system protection standardsand fuel economy requirements of theInternational Lubricant Standardizationand Approval Committee (ILSAC),comprised of U.S. and Japaneseautomobile manufacturers.

5W-20

120100806040200–20

50403020100–10–20–30

Except U.S.A. and CANADA

(ILSAC)

8-18


Owner Maintenance


Form No.8U55-EA-05G

Black plate (267,1)

The quality designation SL, or ILSACmust be on the label.

5W-20

120100806040200–20

50403020100–10–20–30

qInspecting Engine Oil Level

1. Be sure the vehicle is on a levelsurface.

2. Warm up the engine to normaloperating temperature.

3. Turn it off and wait at least 5 minutesfor the oil to return to the oil pan.

4. Pull out the dipstick, wipe it clean, andreinsert it fully.

Full

OK

Low

5. Pull it out again and examine the level.It's OK between Low and Full.But if it's near or below Low, addenough oil to bring the level to Full.

CAUTIONDon't add engine oil over Full. Thismay cause engine damage.

6. Make sure the O-ring on the dipstick ispositioned properly before reinsertingthe dipstick.

The distance between Low and Full on thedipstick represents the following:

Oil capacity

L (US qt, Imp qt) 0.75 (0.79, 0.66)

qChanging Engine Oil and Filter

Change engine oil and filter according toScheduled Maintenance (page 8-3).

Please act responsibly―protect theenvironment and take used oil to arecycling facility. Ask your dealer or aservice station for information.

WARNINGHandling Used Engine Oil:Continuous contact with used engineoil is dangerous. It could cause skincancer. Always wash with soap andwater immediately after changing oiland filter.

CAUTIONRemove any oil splatter from theexhaust manifold, the exhaust pipe andthe shield. Oil left on these areas willsmoke when the engine is running.


Owner Maintenance

8-19


Form No.8U55-EA-05G

Black plate (268,1)

Changing engine oil

WARNINGChecking or Changing Engine Oil:Hot engine oil is dangerous. If theengine has been running, the engineoil becomes very hot. You could beseriously burned. Don't check orchange the engine oil when the engineis hot.

1. Warm up the engine for a few minutesand turn it off. Remove the oil-fillercap.

2. Remove the drain plug and drain theoil into a suitable container.

3. Replace the drain plug washer after theoil has thoroughly drained.

4. Reinstall the plug tightly.

5. Fill the engine with new oil to theMAX mark on the dipstick.

6. Securely reinstall the oil-filler cap.

Forward

Loosen

Drain plug

Tighten

7. Start the engine and inspect around thedrain plug for leaks.

8. Turn it off and wait 5 minutes for theoil to return to the oil pan.

Check the oil level and fill to the MAXmark if necessary.

With oil filter replacement

Oil capacity (reference only)

L (US qt, Imp qt) 4.3 (4.5, 3.8)

Without oil filter replacement

Oil capacity (reference only)

L (US qt, Imp qt) 3.9 (4.1, 3.4)

NOTE

l The indicated engine oil capacitiesare for general reference purposesonly. When adding or changing oil,verify the engine oil level with theoil dipstick.

l Use only specified engine oil (page10-4).

Changing oil filter

Because you need a special tool toretighten the filter, an Authorized MazdaDealer should do the work.

8-20


Owner Maintenance


Form No.8U55-EA-05G

Black plate (269,1)

Engine Coolant

qInspecting Coolant Level

WARNINGHot Engine:A hot engine is dangerous. If theengine has been running, parts of theengine compartment can become veryhot. You could be burned. Carefullyinspect the engine coolant in thecoolant reservoir, but do not open it.Do not use a match or live flame in theengine compartment. DO NOT ADDCOOLANT WHEN THE ENGINE ISHOT.

Cooling Fan and EngineInspection:Inspecting the engine with the ignitionswitch in the ON position isdangerous. The cooling fan could turnon unexpectedly even when the engineisn't running. You could be seriouslyinjured by the fan. Turn the ignitionswitch off and remove the key from theignition switch when you inspect theengine.

Cooling System Cap:When the engine and radiator are hot,scalding coolant and steam may shootout under pressure and cause seriousinjury. Don't remove the coolingsystem cap when the engine andradiator are hot.

Inspect the antifreeze protection andcoolant level in the coolant reservoir atleast once a year―at the beginning of thewinter season―and before travelingwhere temperatures may drop belowfreezing.

Inspect the condition and connections ofall cooling system and heater hoses.Replace any that are swollen ordeteriorated.

The coolant should be at full in theradiator and between the MAX and MINmarks on the coolant reservoir when theengine is cool.

If it's at or near MIN, add enough coolantto the coolant reservoir to providefreezing and corrosion protection and tobring the level to MAX.

CAUTIONRadiator coolant will damage paint.Rinse it off quickly if spilled.

If the coolant reservoir is empty or newcoolant is required frequently, consult anAuthorized Mazda Dealer.


Owner Maintenance

8-21


Form No.8U55-EA-05G

Black plate (270,1)

qChanging Coolant

Change coolant according to ScheduledMaintenance (page 8-3).

CAUTIONl Use only soft (demineralized) waterin the coolant mixture. Water thatcontains minerals will cut down onthe coolant's effectiveness.

l Don't add only water. Always add aproper coolant mixture.

l The engine has aluminum parts andmust be protected by an ethylene-glycol-based coolant to preventcorrosion and freezing.

l DO NOT USE coolants ContainingAlcohol, methanol, Borate orSilicate.These coolants could damage thecooling system.

l DO NOT MIX alcohol or methanolwith the coolant. This could damagethe cooling system.

l Don't use a solution that containsmore than 60% antifreeze.This would reduce effectiveness.

NOTE

If the “FL22” mark is shown on or nearthe cooling system cap, use FL22 typeengine coolant. If engine coolant otherthan FL22 type is used, the enginecoolant must be replaced earlier thanthe specified replacement intervalindicated in the scheduled maintenance(page 8-3).

Except FL22 type

For mixture percentage:

Protection

Volume

Antifreezesolution

Deminera-lized water

Above _16°C (3°F) 35% 65%

Above _26°C (_15°F) 45% 55%

Above _40°C (_40°F) 55% 45%

FL22 type

FL22 type engine coolant concentration isfactory adjusted. Use the product as it iswithout diluting it.

8-22


Owner Maintenance


Form No.8U55-EA-05G

Black plate (271,1)

To change coolant

WARNINGRemoving the Cooling System Cap:Removing the cooling system capwhile the engine is running or hot isdangerous. This might lead to coolingsystem and engine damage and couldresult in serious injury from escapinghot coolant or steam. Turn off theengine and wait until it's cool. Eventhen, be very careful when removingthe cap.Wrap a thick cloth around the cap andslowly turn it counterclockwise abouttwo and a half rotations.Step back while the pressure escapes.When you're sure all the pressure hasescaped, turn the capcounterclockwise ― still using a cloth― and remove the cap.

Brake/Clutch Fluid

qInspecting Brake/Clutch Fluid Level

The brakes and clutch draw fluid from thesame reservoir.Inspect the fluid level in the reservoirregularly. It should be kept at MAX.The level normally drops withaccumulated distance, a conditionassociated with wear of brake and clutchlinings. If it is excessively low, have thebrake/clutch system inspected by anAuthorized Mazda Dealer.


Owner Maintenance

8-23


Form No.8U55-EA-05G

Black plate (272,1)

qAdding Brake/Clutch Fluid

WARNINGSpilled Brake Fluid:Spilled brake fluid is dangerous. If itgets in your eyes, they could beseriously injured. If this happens,immediately flush your eyes with waterand get medical attention. Brake fluidspilled on a hot engine could cause afire. Be careful not to spill brake fluidon yourself or on the engine.

Low Brake/Clutch Fluid Levels:Low brake/clutch fluid levels aredangerous. Low levels could signalbrake lining wear or a brake systemleak. Your brakes could fail and causean accident. If you find a low fluidlevel, have the brakes and clutchinspected.

If the fluid level is low, add fluid until itreaches MAX.Before adding fluid, thoroughly clean thearea around the cap.

CAUTIONl Brake and clutch fluid will damagepainted surfaces. If brake or clutchfluid does get on a painted surface,wipe it off immediately.

l Using nonspecified brake and clutchfluids (page 10-4) will damage thesystems. Mixing different fluids willalso damage them.If the brake/clutch system frequentlyrequires new fluid, consult anAuthorized Mazda Dealer.

Power Steering Fluid

qInspecting Power Steering FluidLevel

CAUTIONTo avoid damage to the power steeringpump, don't operate the vehicle for longperiods when the power steering fluidlevel is low.

NOTE

Use specified power steering fluid(page 10-4).

Inspect the fluid level in the reservoir ateach engine oil change with the engine offand cold. Add fluid if necessary; it doesnot require periodic changing.

The level must be kept between MIN andMAX.

Visually examine the lines and hoses forleaks and damage.

If new fluid is required frequently, consultan Authorized Mazda Dealer.

8-24


Owner Maintenance


Form No.8U55-EA-05G

Black plate (273,1)

Automatic Transaxle Fluid(ATF)

qInspecting Automatic TransaxleFluid Level

The automatic transaxle fluid level shouldbe inspected regularly. Measure it asdescribed below.

2.3-liter engine

CAUTIONl Always check the automatictransaxle fluid level according to thefollowing procedure. If theprocedure is not done correctly, theautomatic transaxle fluid levelcannot be measured accuratelywhich could lead to automatictransaxle damage.

l A low fluid level can cause transaxleslippage. Overfilling can causefoaming, loss of fluid, and transaxlemalfunction.

l Use only the specified fluid. A non-specified fluid could result intransaxle malfunction and failure.

1. Park on a level surface and set theparking brake firmly.

2. Make sure there is no ATF leakagefrom the ATF hose or the housing.

3. Shift the shift lever to the park position(P), start the engine and warm it up.

CAUTIONDo not shift the shift lever while theengine is warming up. If the ATF levelis extremely low, the automatictransaxle could be damaged.

4. While the engine is still idling, pull outthe dipstick and wipe it clean, and thenput it back.

5. Check the ATF level. If there is no ATFadhering 5 mm from the end of thedipstick, add ATF.

CAUTIONIf there is no ATF adhering to thedipstick even after the engine has beenwarmed up, do not drive the vehicle.Otherwise, the automatic transaxlecould be damaged.

6. Shift the shift lever to each range andposition, and make sure there is noabnormality.

7. Drive the vehicle on city roads for 5km (3.1 mile) or more.



Owner Maintenance

8-25


Form No.8U55-EA-05G

Black plate (274,1)

9. Shift the shift lever to the park position(P), check the ATF level while theengine is idling, and make sure that theATF level is within the proper level. Ifthe ATF level is not within the properlevel, add ATF.The proper fluid level is marked on thedipstick as follows.

Full

OK

Low

2.0-liter engine

The volume of fluid changes with thetemperature. Fluid must be checked at idlewithout driving at normal operatingtemperature.

CAUTIONl Low fluid level causes transaxleslippage. Overfilling can causefoaming, loss of fluid, and transaxlemalfunction.

l Use specified fluid (page 10-4). Anonspecified fluid could result intransaxle malfunction and failure.


2. Start the engine and depress the brakepedal.

3. Move the shift lever through all rangesand set it at P.

WARNINGSudden Vehicle Movement:Shifting the shift lever without firstdepressing the brake pedal isdangerous. The vehicle could movesuddenly and cause an accident.Make sure the brake pedal is appliedbefore shifting the shift lever.

4. With the engine still idling, pull out thedipstick, wipe it clean, and put it back.

5. Pull it out again.The proper fluid level is marked on thedipstick as follows.

Full

A

Low

Full

BLow

Fluid hot scale A

When the vehicle has been driven and thefluid is at normal operating temperature,about 65°C (150°F), the level must bebetween Full and Low.

8-26


Owner Maintenance


Form No.8U55-EA-05G

Black plate (275,1)

Fluid cold scale B

When the engine has not been runningand the outside temperature is about 20°C(70°F), the fluid level should be close to,but not above, the bottom notch on thedipstick.

CAUTIONl Use the cold scale only as areference.

l If outside temperature is lower thanabout 20°C (70°F), start the engineand inspect the fluid level after theengine reaches operatingtemperature.

l If the vehicle has been driven for anextended period at high speeds or incity traffic in hot weather, inspect thelevel only after stopping the engineand allowing the fluid to cool for 30minutes.

Fully insert the dipstick. When addingfluid, inspect with the dipstick to makesure it doesn't pass full.

NOTE

Inspect the fluid on both sides of thedipstick in a well lit area for an accuratereading.

Washer Fluid

qInspecting Washer Fluid Level

WARNINGSubstitute Washer Fluid:Using radiator antifreeze as washerfluid is dangerous. If sprayed on thewindshield, it will dirty the windshield,affect your visibility, and could resultin an accident. Use only windshieldwasher fluid or plain water in thereservoir.

Using Washer Fluid Without Anti-freeze Protection in Cold Weather:Operating your vehicle intemperatures below 4 degrees C (40degrees F) using washer fluid withoutanti-freeze protection is dangerous asit could cause impaired windshieldvision and result in an accident. Incold weather, always use washer fluidwith anti-freeze protection.

NOTE

State or local regulations may restrictthe use of volatile organic compounds(VOCs), which are commonly used asanti-freeze agents in washer fluid. Awasher fluid with limited VOC contentshould be used only if it providesadequate freeze resistance for allregions and climates in which thevehicle will be operated.


Owner Maintenance

8-27


Form No.8U55-EA-05G

Black plate (276,1)

Inspect fluid level in the washer fluidreservoir; add fluid if necessary.

To inspect the washer fluid level in thefront reservoir, pull off the cap. Then,holding your thumb over the hole in thecenter of the cap, lift it straight up. Thefluid level can be seen from the fluidcolumn in the pipe. Add fluid if necessary.

Use plain water if washer fluid isunavailable. But use only washer fluid incold weather to prevent it from freezing.

NOTE

Front and rear washer fluid is suppliedfrom the same reservoir.

Body LubricationAll moving points of the body, such asdoor and hood hinges and locks, shouldbe lubricated each time the engine oil ischanged. Use a nonfreezing lubricant onlocks during cold weather.

Make sure the hood's secondary latchkeeps the hood from opening when theprimary latch is released.

8-28


Owner Maintenance


Form No.8U55-EA-05G

Black plate (277,1)

Air Filter

CAUTIONDon't drive without an air filter. Thiscould result in excessive engine wear.

This air filter may be cleaned withcompressed air and reused, or replaced,depending on its condition. Unless it isvery dirty, simply shake it to removeforeign particles. Each time you inspect it,wipe inside the air cleaner housing with adamp cloth.

qReplacing the Air Filter

NOTE

If the vehicle is operated in very dustyor sandy areas, replace the filter moreoften than the recommended intervals.

CAUTIONUse a Mazda genuine air filter. Use ofother filters could damage the airflowsensor.

1. Make sure the ignition switch is turnedoff.

2. Remove the battery cover and batteryduct.

Battery duct

Battery cover

3. Unfasten the clamps.

4. Lift off the air filter cover and removethe filter.

Air filter cover

Air filter


Owner Maintenance

8-29


Form No.8U55-EA-05G

Black plate (278,1)

5. Wipe inside the air cleaner housingwith a damp cloth.

6. Clean or replace the filter.

7. Install in the reverse order of removal.

Replace the filter according to theScheduled Maintenance (page 8-3).

Wiper Blades

CAUTIONl Hot waxes applied by automatic carwashers have been known to affectthe wiper's ability to clean windows.

l To prevent damage to the wiperblades, don't use gasoline, kerosene,paint thinner, or other solvents on ornear them.

l When the wiper lever is in theAUTO position and the ignitionswitch is in the ON position, thewipers may move automatically inthe following cases:




l If the rain sensor is struck with ahand or other object from insidethe vehicle.

Be careful not to pinch hands orfingers as it may cause injury, ordamage the wipers. When washingor servicing your Mazda, make surethe wiper lever is in the OFFposition.

Contamination of either the windshield orthe blades with foreign matter can reducewiper effectiveness. Common sources areinsects, tree sap, and hot wax treatmentsused by some commercial car washes.

8-30


Owner Maintenance


Form No.8U55-EA-05G

Black plate (279,1)

If the blades are not wiping properly,clean the window and blades with a goodcleaner or mild detergent; then rinsethoroughly with clean water. Repeat ifnecessary.

qReplacing Windshield Wiper Blades

When the wipers no longer clean well, theblades are probably worn or cracked.Replace them.

CAUTIONTo prevent damage to the wiper armsand other components, don't try tosweep the wiper arm by hand.

1. Raise the wiper arm and turn the bladeassembly to expose the plastic lockingclip.Slide the assembly downward; then liftit off the arm.

Plastic locking clip

CAUTIONTo prevent damage to the windshield letthe wiper arm down easily, don't let itslap down on the windshield.

2. Pull down the blade rubber and slide itout of blade holder.

3. Remove the metal stiffeners from theblade rubber and install them in newblades.


Owner Maintenance

8-31


Form No.8U55-EA-05G

Black plate (280,1)

CAUTIONl Don't bend or discard the stiffeners.You need to use them again.

l If the metal stiffeners are switched,the blade's wiping efficiency couldbe reduced.So don't use the driver's side metalstiffeners on the passenger's side, orvice versa.

l Be sure to reinstall the metalstiffeners in the new blade rubber sothat the curve is the same as it was inthe old blade rubber.

4. Carefully insert the new blade rubber.Then install the blade assembly in thereverse order of removal.

qReplacing Rear Wiper Blade (5Door)

When the wiper no longer cleans well, theblade is probably worn or cracked.Replace it.

CAUTIONTo prevent damage to the wiper armand other components, don't try tosweep the wiper arm by hand.

1. Raise the wiper arm and rotate thewiper blade to the right until it unlocks,then remove the blade.

CAUTIONTo prevent damage to the rear windowlet the wiper arm down easily, don't letit slap down on the rear window.

2. Pull down the blade rubber and slide itout of the blade holder.

8-32


Owner Maintenance


Form No.8U55-EA-05G

Black plate (281,1)

3. Remove the metal stiffeners from theblade rubber and install them in newblades.

CAUTIONDon't bend or discard the stiffeners.You need to use them again.

4. Carefully insert the new blade rubber.Then install the blade assembly in thereverse order of removal.


Owner Maintenance

8-33


Form No.8U55-EA-05G

Black plate (282,1)

Battery

WARNINGBattery-Related Lead Materials:Battery posts, terminals and related accessories contain lead and lead compounds,chemicals known to the State of California to cause cancer and reproductive harm.Wash hands after handling.

Follow These Precautions Carefully:To ensure safe and correct handling of the battery, read the following precautionscarefully before using the battery or inspecting it.

Eye Protection:Working without eye protection is dangerous. Battery fluid contains SULFURICACID which could cause blindness if splashed into your eyes. Also, hydrogen gasproduced during normal battery operation, could ignite and cause the battery toexplode. Always wear eye protection when working near the battery.

Spilled Battery Fluid:Spilled battery fluid is dangerous.Battery fluid contains SULFURIC ACID which could cause serious injuries if it getsin eyes, skin or clothing. If this happens, immediately flush your eyes with water for15 minutes or wash your skin thoroughly and get medical attention. Wear eyeprotection and protective gloves to prevent contact with battery fluid.

Children and Batteries:Allowing children to play near batteries is dangerous. Battery fluid could causeserious injuries if it gets in the eyes or on the skin. Always keep batteries out of thereach of children.

8-34


Owner Maintenance


Form No.8U55-EA-05G

Black plate (283,1)

WARNING

Keep Flames Away:Flames and sparks near open battery cells are dangerous. Hydrogen gas, producedduring normal battery operation, could ignite and cause the battery to explode. Anexploding battery can cause serious burns and injuries. Keep all flames includingcigarettes and sparks away from open battery cells. When working near a battery, donot allow metal tools to contact the positive ( ) or negative ( ) terminal of thebattery. Do not allow the positive ( ) terminal to contact the vehicle body.

Battery-Related Explosion:Flames and sparks near open battery cells are dangerous. Hydrogen gas, producedduring normal battery operation, could ignite and cause the battery to explode. Anexploding battery can cause serious burns and injuries. Keep all flames, includingcigarettes, and sparks away from open battery cells.


Owner Maintenance

8-35


Form No.8U55-EA-05G

Black plate (284,1)

NOTE

Remove the battery cover beforeperforming battery maintenance.

qBattery Maintenance

To get the best service from a battery:

l Keep it securely mounted.

l Keep the top clean and dry.

l Keep terminals and connections clean,tight, and coated with petroleum jellyor terminal grease.

l Rinse off spilled electrolyteimmediately with a solution of waterand baking soda.

l If the vehicle will not be used for anextended time, disconnect the batterycables.

qInspecting Electrolyte Level

A low level of electrolyte fluid will causethe battery to discharge quickly.

Upper level

Lower level

Inspect the electrolyte level at least once aweek. If it's low, remove the cap and addenough distilled water to bring the levelbetween the upper and lower level(illustration).

Don't overfill.Examine the specific gravity of theelectrolyte with a hydrometer, especiallyduring cold weather. If it's low, rechargethe battery.

8-36


Owner Maintenance


Form No.8U55-EA-05G

Black plate (285,1)

TiresFor reasons of proper performance, safety,and better fuel economy, always maintainrecommended tire inflation pressures andstay within the recommended load limitsand weight distribution.

WARNINGUsing Different Tire Types:Driving your vehicle with differenttypes of tires is dangerous. It couldcause poor handling and poorbraking; leading to loss of control.Except for the limited use of thetemporary spare tire, use only thesame type tires (radial, bias-belted,bias-type) on all four wheels.

Using Wrong-Sized Tires:Using any other tire size than what isspecified for your Mazda (page 10-7)is dangerous. It could seriously affectride, handling, ground clearance, tireclearance, and speedometercalibration. This could cause you tohave an accident. Use only tires thatare the correct size specified for yourMazda.

qTire Inflation Pressure

WARNINGIncorrect Tire Inflation:Overinflation or underinflation of tiresis dangerous. Adverse handling orunexpected tire failure could result ina serious accident. Always inflate thetires to the correct pressure (page10-7).

The Tire Pressure Monitoring Systemí

does not alleviate the need to check thetire condition every day, includingwhether the tires all look inflated properly.Inspect all tire pressure monthly(including the spare) when the tires arecold. Maintain recommended pressuresfor the best ride, top handling, andminimum tire wear.When checking the tire pressures, use of adigital tire pressure gauge isrecommended.

Refer to the specification charts (page10-7).


Owner Maintenance

8-37íSome models.


Form No.8U55-EA-05G

Black plate (286,1)

NOTE

l Always check tire pressure whentires are cold.

l Warm tires normally exceedrecommended pressures. Don'trelease air from warm tires to adjustthe pressure.

l Underinflation can cause reducedfuel economy, uneven andaccelerated tire wear, and poorsealing of the tire bead, which willdeform the wheel and causeseparation of tire from rim.

l Overinflation can produce a harshride, uneven and accelerated tirewear, and a greater possibility ofdamage from road hazards.Keep your tire pressure at the correctlevels. If one frequently needsinflating, have it inspected.

qTire Rotation

To equalize tread wear, rotate the tiresevery 12,000 km (7,500 miles)/8,000km*(5,000 miles) or sooner if irregularwear develops. During rotation, inspectthem for correct balance.

* Unique driving conditions for U.S.A.,Canada and Puerto Rico

Do not include (TEMPORARY USE ONLY) spare tire in rotation.

Forward

Also, inspect them for uneven wear anddamage. Abnormal wear is usually causedby one or a combination of the following:

l Incorrect tire pressure

l Improper wheel alignment

l Out-of-balance wheel

l Severe braking

After rotation, inflate all tire pressures tospecification (page 10-7) and inspect thelug nuts for tightness.

CAUTIONRotate unidirectional tires and radialtires that have an asymmetrical treadpattern or studs only from front to rear,not from side to side. Tire performancewill be weakened if rotated from side toside.

8-38


Owner Maintenance


Form No.8U55-EA-05G

Black plate (287,1)

qReplacing a Tire

WARNINGWorn Tires:Driving with worn tires is dangerous.Reduced braking, steering, andtraction could result in an accident.Always use tires that are in goodcondition.

CAUTION(With Tire Pressure MonitoringSystem)When replacing/repairing the tires orwheels or both, have the work done byan Authorized Mazda Dealer, or the tirepressure sensors may be damaged.

NOTE

(With Tire Pressure MonitoringSystem)

l When tires with steel wirereinforcement in the sidewalls areused, the system may not functioncorrectly even with a genuine wheel.Refer to System Error Activation onpage 5-25.

l Be sure to install the tire pressuresensors whenever tires or wheels arereplaced.Refer to Tires and Wheels on page5-25.

If a tire wears evenly, a wear indicatorwill appear as a solid band across thetread.Replace the tire when this happens.

New tread

Tread wear indicator

Worn tread

You should replace it before the band isacross the entire tread.

NOTE

Tires degrade over time, even whenthey are not being used on the road. It isrecommended that tires generally bereplaced when they are 6 years or older.Heat caused by hot climates or frequenthigh loading conditions can acceleratethe aging process. You should replacethe spare tire when you replace theother road tires due to the aging of thespare tire. Regarding the manufacturingweek and year is indicated with 4 digit.Refer to The tire labeling on page 9-21.


Owner Maintenance

8-39


Form No.8U55-EA-05G

Black plate (288,1)

qTemporary Spare Tire

Inspect the temporary spare tire at leastmonthly to make sure it's properly inflatedand stored.

NOTE

The temporary spare tire conditiongradually deteriorates even if it has notbeen used.

The temporary spare tire is easier tohandle because of its construction. It islighter and smaller than a conventionaltire and should be used only for anemergency and only for a short distance.

Use the temporary only until theconventional tire is repaired, which shouldbe as soon as possible.

Maintain its pressure at 420 kPa (4.2kgf/cm2 or bar, 60 psi).

CAUTIONl Don't use your temporary spare tirerim with a snow tire or aconventional tire. Neither willproperly fit and could damage bothtire and rim.

l The temporary spare tire has a treadlife of less than 5,000 km (3,000miles). The tread life may be shorterdepending on driving conditions.

l The temporary spare tire is forlimited use, however, if the treadwear solid-band indicator appears,replace the tire with the same type oftemporary spare (page 8-39).

NOTE

Tires degrade over time, even whenthey are not being used on the road. It isrecommended that tires generally bereplaced when they are 6 years or older.Heat caused by hot climates or frequenthigh loading conditions can acceleratethe aging process. You should replacethe spare tire when you replace theother road tires due to the aging of thespare tire. Regarding the manufacturingweek and year is indicated with 4 digit.Refer to The tire labeling on page 9-21.

qReplacing a Wheel

WARNINGUsing a Wrong-Sized Wheel:Using a wrong-sized wheel isdangerous. Braking and handlingcould be affected, leading to loss ofcontrol and an accident. Always usewheels of the correct size on yourvehicle.

8-40


Owner Maintenance


Form No.8U55-EA-05G

Black plate (289,1)

CAUTIONl Awrong-sized wheel may adverselyaffect:

l Tire fitl Wheel and bearing lifel Ground clearancel Snow-chain clearancel Speedometer calibrationl Headlight aiml Bumper heightl Tire Pressure Monitoring System

l (With Tire Pressure MonitoringSystem)

l When replacing/repairing the tiresor wheels or both, have the workdone by an Authorized MazdaDealer, or the tire pressure sensorsmay be damaged.

l The wheels equipped on yourMazda are specially designed forinstallation of the tire pressuresensors. Do not use non-genuinewheels, otherwise it may not bepossible to install the tire pressuresensors.

NOTE

Be sure to install the tire pressuresensors whenever tires or wheels arereplaced. Refer to Tires and Wheels onpage 5-25.

When replacing a wheel, make sure thenew one is the same as the original factorywheel in diameter, rim width, and offset.

Proper tire balancing provides the bestriding comfort and helps reduce treadwear. Out-of-balance tires can causevibration and uneven wear, such ascupping and flat spots.


Owner Maintenance

8-41


Form No.8U55-EA-05G

Black plate (290,1)

Light Bulbs

Side turn signal lights

Rear turn signal lights

License plate lightOverhead light/Map lights (Front)

Headlights (Low beam)

Fog lights Brake lights/Taillights

Reverse light

High-mount brake light

Trunk light

4 Door

5 Door

Overhead light (Rear)

Overhead light/Map lights (Front)

Headlights (Low beam)


Fog lights

License plate light



Rear turn signal lights

Brake lights/Taillights

Reverse light

Some models.

Front turn signal lights/Side-marker lights

Headlights (High beam)

Front turn signal lights/Side-marker lights

Headlights (High beam) Luggage

compartment light

8-42


Owner Maintenance


Form No.8U55-EA-05G

Black plate (291,1)

WARNINGXenon Fusion Bulb Replacement:Replacing the xenon fusion bulbsyourself is dangerous. Because thexenon fusion bulbs require highvoltage, you could receive an electricshock if the bulbs are handledincorrectly. Do not replace the xenonfusion bulbs yourself. Consult anAuthorized Mazda Dealer when thereplacement is necessary.

Handling Halogen Bulbs:When a halogen bulb breaks, it isdangerous. These bulbs containpressurized gas. If one is broken, itwill explode and serious injuries couldbe caused by the flying glass.If the glass portion is touched withbare hands, body oil could cause thebulb to overheat and explode when lit.Never touch the glass portion of thebulb with your bare hands and alwayswear eye protection when handling orworking around halogen bulbs.

Children and Halogen Bulbs:Playing with a halogen bulb isdangerous. Serious injuries could becaused by dropping a halogen bulb orbreaking it some other way.Always keep halogen bulbs out of thereach of children.

qReplacing Exterior Light Bulbs

Replacing a headlight bulb

1. Make sure the ignition switch is turnedoff and the headlight switch is off.

2. Lift the hood.

3. Do the following procedure whenreplacing the left headlight bulb.Turn the screws counterclockwise andremove them and the cover.

4. Find the high and low beam bulbs inthe rear of the headlight unit.The outboard bulb is the LOW beam,and the inboard one is the HIGH beam.Refer to Light Bulbs on page 8-42.


Owner Maintenance

8-43


Form No.8U55-EA-05G

Black plate (292,1)

High-beam bulb

1. Turn the socket and bulb assemblycounterclockwise and remove it.Carefully remove the headlight bulbfrom its socket in the reflector bygently pulling it straight backward outof the socket.

2. Disconnect the bulb from the electricalconnector by pressing the tab on theconnector with your finger and pullingthe bulb upward.

3. Install the new bulb in the reverse orderof removal.

NOTE

l To replace the bulb, contact anAuthorized Mazda Dealer.

l If the halogen bulb is accidentallytouched, it should be cleaned withrubbing alcohol before being used.

l Use the protective cover and cartonfor the replacement bulb to disposeof the old bulb promptly and out ofthe reach of children.

Low-beam bulb

(Xenon fusion bulb)You cannot replace the low beam bulbs byyourself.The bulbs must be replaced at anAuthorized Mazda Dealer.

(Halogen bulbs)

1. Detach the electrical connector fromthe bulb by pulling it to the rear.

2. Pull off the sealing cover.

3. Unhook the bulb retaining spring.

4. Swing the retaining spring out andaway to free the headlight bulb.

5. Carefully remove the headlight bulbfrom the socket by pulling it straightback.

8-44


Owner Maintenance


Form No.8U55-EA-05G

Black plate (293,1)

6. Replace the bulb.


NOTE




l When reinstalling the sealing cover,make sure faces up.

Replacing a fog light bulbí

1. Turn the screw counterclockwise andremove it and partially peel back themudguard.

2. Turn the socket and bulb assemblycounterclockwise and remove it.Carefully remove the fog light bulbfrom its socket in the reflector bygently pulling it straight backward outof the socket.

3. Disconnect the bulb from the electricalconnector by pressing the tab on theconnector with your finger and pullingthe bulb upward.


NOTE




Front turn signal lights/Side-markerlights

Due to the complexity and difficulty ofthe procedure, the bulbs should bereplaced by an Authorized Mazda Dealer.


1. Slide the unit as shown in the figure toremove it.


Owner Maintenance

8-45íSome models.


Form No.8U55-EA-05G

Black plate (294,1)

2. Detach the electrical connector fromthe unit by pulling it to the rear.

3. Install the new side turn signal unit inthe reverse order of removal.

NOTE

Bulb replacement is not possiblebecause it is built into the unit. Replacethe unit.

Brake lights/Taillights, Rear turn signallights (4 Door)

1. Pull the center of each plastic retainerand remove the retainers and the trunkend trim.

Removal

Installation

2. Pull the center of each plastic retainerand remove the retainers and partiallyopen the trunk side trim.

Removal

Installation

3. Turn the socket and bulb assemblycounterclockwise and remove it.

4. Disconnect the bulb from the socket.

Brake lights/TaillightsRear turn signal lights


NOTE

To replace the bulb, contact anAuthorized Mazda Dealer.

8-46


Owner Maintenance


Form No.8U55-EA-05G

Black plate (295,1)

Brake lights/Taillights (5 Door)

With LED bulb

Due to the complexity and difficulty ofthe procedure, the LED bulbs should bereplaced by an Authorized Mazda Dealer.

NOTE

LED bulb replacement is not possible.The rear combination component mustbe replaced.

With Non-LED bulb

1. Remove the cover.

Left side

Right side




NOTE


Rear turn signal lights (5 Door)


Left side


Owner Maintenance

8-47


Form No.8U55-EA-05G

Black plate (296,1)

Right side




NOTE


Reverse light

4 Door

1. Pull the center section of the plasticretainer and remove the retainers, thenremove the trunk rear trim.

Removal

Installation




NOTE


8-48


Owner Maintenance


Form No.8U55-EA-05G

Black plate (297,1)

5 Door





NOTE



4 Door

1. Pull the center of each plastic retainerand remove the retainers and the trunkrear trim.

Removal

Installation

2. Disconnect the electrical connectorfrom the socket.




NOTE



Owner Maintenance

8-49


Form No.8U55-EA-05G

Black plate (298,1)

5 Door

1. Remove the liftgate upper trim.

2. Disconnect the electrical connectorfrom the socket.




NOTE


License plate lights

1. Wrap a flathead screwdriver with a softcloth to prevent damage to the lens andremove the lens by carefully prying onthe edge of the lens with a flatheadscrewdriver.

2. Disconnect the bulb by pulling it out.

Edge


qReplacing Interior Light Bulbs

Overhead light/Map lights (Front)í

1. Wrap a flathead screwdriver with a softcloth to prevent damage to the trim andgently insert it in the overhead light asshown in the figure, and then removethe overhead light unit.

8-50


íSome models.

Owner Maintenance


Form No.8U55-EA-05G

Black plate (299,1)





1. Wrap a small flathead screwdriver witha soft cloth to prevent damage to thelens and remove the lens by carefullyprying on the edge of the lens with theflathead screwdriver.


Edge


Trunk light(4 Door)

1. Press both sides of the lens cap toremove it.



Luggage compartment light (5 Door)

1. Insert your finger as shown in thefigure and remove the unit.

2. Wrap a small flathead screwdriver witha soft cloth to prevent damage to thelens and remove the lens by carefullyprying on the edge of the lens with theflathead screwdriver.


Owner Maintenance

8-51


Form No.8U55-EA-05G

Black plate (300,1)



FusesYour vehicle's electrical system isprotected by fuses.

If any lights, accessories, or controls don'twork, inspect the appropriate circuitprotector. If a fuse has blown, the insideelement will be melted.

If the same fuse blows again, avoid usingthat system and consult an AuthorizedMazda Dealer as soon as possible.

qFuse Replacement

Replacing the fuses on the frontpassenger's side below the glove box

If the electrical system doesn't work, firstinspect fuses on the front passenger's sidebelow the glove box.

1. Turn off the ignition switch and otherswitches.


8-52


Owner Maintenance


Form No.8U55-EA-05G

Black plate (301,1)

3. Turn the knobs counterclockwise andlower the fuse block.

4. Locate the position of the suspectedfuse by using the chart inside the fuseblock cover.

5. Pull the fuse straight out with the fusepuller provided on the inside of theengine compartment fuse block cover.

6. Inspect it and replace if it's blown.

Normal Blown

7. Push in a new fuse of the sameamperage rating, and make sure it fitstightly. If it doesn't, have an AuthorizedMazda Dealer install it.If you have no spare fuses, borrow oneof the same rating from a circuit notessential to vehicle operation, such asthe MIRROR or CIGAR circuit.

WARNINGAlways replace a fuse with one of thesame rating. Otherwise you maydamage the electric system.

Replacing the fuses under the hood

If the headlights or other electricalcomponents don't work and the fuses inthe cabin are OK, inspect the fuse blockunder the hood. If a fuse is blown, it mustbe replaced. Follow these steps:

1. Turn off the ignition switch and allother switches.


Owner Maintenance

8-53


Form No.8U55-EA-05G

Black plate (302,1)

2. Remove the fuse block cover.

3. If a fuse is blown, replace it with a newone of the same amperage rating.

Normal Blown

NOTE

To replace the MAIN fuse, contact anAuthorized Mazda Dealer.

8-54


Owner Maintenance


Form No.8U55-EA-05G

Black plate (303,1)

qFuse Panel Description

Fuse block (Engine compartment)

1

2

3

4

5

6

7 8

9

10

11

12

13

14

15

16

17

18

19

20 21

22

23

24

25

26 27

28

29

30 31

32

33

34

35

36

DESCRIPTIONFUSE

RATINGPROTECTED COMPONENT

1 FAN 40 A Cooling fan

2 P/ST 80 A EHPAS

3 BTN 40 A For protection of various circuits

4 HEAD 40 A Headlights

5 PTC 80 A ―

6 GLOW 60 A ―

7 ABS 1 30 A ABSí

8 ABS 2 20 A ABSí

9 ENGINE 30 A For protection of various circuits

10 ― ― ―

11 IG KEY 1 30 A Ignition switch

12 STARTER 20 A Starter clutch

13 IG KEY 2 30 A Ignition switch

14 ― ― ―

15 HEATER 40 A Blower motor

16 ― ― ―

17 DEFOG 40 A Rear window defroster


Owner Maintenance

8-55íSome models.


Form No.8U55-EA-05G

Black plate (304,1)

DESCRIPTIONFUSE


18 AUDIO 30 A Audio system (BOSE Sound System-equipped model)

19 ABS IG 10A ABSí

20 FOG 15 A Fog lightsí

21 HORN 15 A Horn

22 ― ― ―

23 H/CLEAN 20 A ―

24 F/PUMP 15 A Fuel pump

25 P/ST IG 10A Power steering

26 A/C MAG 10A Air conditioner

27 ALT/TCM 10A/15A Alternator/Transmission control module

28 ― ― ―

29 ― ― ―

30 ENG +B 10A PCM

31 ROOM 15 A Interior lights

32 ENG BAR 4 10A O2 heater

33 ENG BAR 3 10A O2 heater

34 EGI INJ 10A Injector

35 ENG BAR 1 10A Air flow sensor

36 ENG BAR 2 10A EGR control valve

8-56


íSome models.

Owner Maintenance


Form No.8U55-EA-05G

Black plate (305,1)

Fuse block (Passenger's side)

37 38 39 40 4142

43 44 4546 47 48 49 50 515253 54 55 56 5758 59 60 61 62 63 64

65 66 67 68 69 70 7172 737475 76 77 78 79808182 83 84 85 86

DESCRIPTIONFUSE


37 D/LOCK 2 15 A Power door lock

38 STOP 10A Stop lights

39 HEAD HIGH L 10A Headlight high beams (LH)

40 HEAD HIGH R 10A Headlight high beams (RH)

41 ― ― ―

42 ― ― ―

43 CIGAR 15 A Lighter

44 RADIO 7.5 A Audio system

45 MIRROR 10A Power control mirror

46 TAIL R 7.5 A Taillight (RH), Parking lights (RH) License plate lights

47 OBD 10A For protection of various circuits

48 ― ― ―

49 TR/LOCK 20 A ―

50 CPU PWR 10A Control unit

51 HAZARD 15 A Turn signals, Hazard warning flashers

52 SUN ROOF 20 A Moonroofí

53 WASHER 20 A Front washer, Rear window wiper and washer

54 ― ― ―

55 P/WIND R 30 A ―


Owner Maintenance

8-57íSome models.


Form No.8U55-EA-05G

Black plate (306,1)

DESCRIPTIONFUSE


56 P/WIND L 30 A ―

57 ALARM 7.5 A ―

58 M/DEF 7.5 A Mirror Defroster

59 ― ― ―

60 HEAD LOW R 15 A Headlight low beams (RH), Headlight levelingí

61 HEAD LOW L 15 A Headlight low beams (LH)

62 ― ― ―

63 ― ― ―

64 ― ― ―

65 SAS 10A Supplemental restraint system

66 METER 10A Instrument cluster, Immobilizer system, Shift lock system

67 IGNITION 20 A ABSí, EHPAS

68 WIPER 20 A Windshield wiper

69 ENGINE 20 A For protection of various circuits

70 IG SIG 10A Auto wiperí

71 SAS 2 7.5 A Supplemental restraint system

72 ― ― ―

73 ― ― ―

74 SEAT WARM 20 A ―

75 D/LOCK 1 25 A Power door lock

76 A/C 10A Air conditioner, Heater control unit

77 P/WIND L 30 A Power window (LH)í

78 P/WIND R 30 A Power window (RH)í

79 BACK 10A Reverse lights

80 SUN ROOF 7.5 A Moonroofí

81 TAIL L 7.5 A Taillights (LH), Parking lights (LH)

82 ILLUMI 7.5 A Illumination

83 ― ― ―

84 ― ― ―

85 ― ― ―

86 ― ― ―

8-58


íSome models.

Owner Maintenance


Form No.8U55-EA-05G

Black plate (307,1)

How to MinimizeEnvironmental Paint Damage

The paintwork on your Mazda representsthe latest technical developments incomposition and methods of application.

Environmental hazards, however, canharm the paint's protective properties, ifproper care is not taken.

Here are some examples of possibledamage, with tips on how to preventthem.

qEtching Caused by Acid Rain orIndustrial Fallout

Occurrence

Industrial pollutants and vehicle emissionsdrift into the air and mix with rain or dewto form acids. These acids can settle on avehicle's finish. As the water evaporates,the acid becomes concentrated and candamage the finish.And the longer the acid remains on thesurface, the greater the chance is fordamage.

Prevention

It is necessary to wash and wax yourvehicle to preserve its finish according tothe instructions in this section. Thesesteps should be taken immediately afteryou suspect that acid rain has settled onyour vehicle's finish.

qDamage Caused by BirdDropping, Insects, or Tree Sap

Occurrence

Bird droppings contain acids. If thesearen't removed they can eat away the clearand color base coat of the vehicle'spaintwork.

When insects stick to the paint surfaceand decompose, corrosive compoundsform. These can erode the clear and colorbase coat of the vehicle's paintwork ifthey are not removed.

Tree sap will harden and adherepermanently to the paint finish. If youscratch the sap off while it is hard, somevehicle paint could come off with it.

Prevention

It is necessary to have your Mazdawashed and waxed to preserve its finishaccording to the instructions in thissection. This should be done as soon aspossible.

Bird droppings can be removed with asoft sponge and water. If you are travelingand these are not available, a moistenedtissue may also take care of the problem.The cleaned area should be waxedaccording to the instructions in thissection.Insects and tree sap are best removed witha soft sponge and water or a commerciallyavailable chemical cleaner.

Another method is to cover the affectedarea with dampened newspaper for one totwo hours. After removing the newspaper,rinse off the loosened debris with water.


Appearance Care

8-59


Form No.8U55-EA-05G

Black plate (308,1)

qWater Marks

Occurrence

Rain, fog, dew, and even tap water cancontain harmful minerals such as salt andlime. If moisture containing theseminerals settles on the vehicle andevaporates, the minerals will concentrateand harden to form white rings. The ringscan damage your vehicle's finish.

Prevention

It is necessary to wash and wax yourvehicle to preserve its finish according tothe instructions in this section. Thesesteps should be taken immediately afteryou find water marks on your vehicle'sfinish.

qPaint Chipping

Occurrence

Paint chipping occurs when gravel thrownin the air by another vehicle's tires hitsyour vehicle.

How to avoid paint chipping

Keeping a safe distance between you andthe vehicle ahead reduces the chances ofhaving your paint chipped by flyinggravel.

NOTE

l The paint chipping zone varies withthe speed of the vehicle. Forexample, when traveling at 90 km/h(56 mph), the paint chipping zone is50 m (164 ft).

l In low temperatures a vehicle's finishhardens. This increases the chance ofpaint chipping.

l Chipped paint can lead to rustforming on your Mazda. Before thishappens, repair the damage by usingMazda touch-up paint according tothe instructions in this section.Failure to repair the affected areacould lead to serious rusting andexpensive repairs.

8-60


Appearance Care


Form No.8U55-EA-05G

Black plate (309,1)

Exterior CareFollow all label and container directionswhen using a chemical cleaner or polish.Read all warnings and cautions.

qMaintaining the Finish

Washing

CAUTIONWhen the wiper lever is in the AUTOposition and the ignition switch is in theON position, the wipers may moveautomatically in the following cases:




l If the rain sensor is struck with ahand or other object from inside thevehicle.

Be careful not to pinch hands or fingersas it may cause injury, or damage thewipers. When washing or servicingyour Mazda, make sure the wiper leveris in the OFF position.

To help protect the finish from rust anddeterioration, wash your Mazdathoroughly and frequently, at least once amonth, with lukewarm or cold water.

If the vehicle is washed improperly, thepaint surface could be scratched. Here aresome examples of how scratching couldoccur.

Scratches occur on the paint surfacewhen:

l The vehicle is washed without firstrinsing off dirt and other foreignmatter.

l The vehicle is washed with a rough,dry, or dirty cloth.

l The vehicle is washed at a car washthat uses brushes that are dirty or toostiff.

l Cleansers or wax containing abrasivesare used.

NOTE

l Mazda is not responsible forscratches caused by automatic carwashes or improper washing.

l Scratches are more noticeable onvehicles with darker paint finishes.

To minimize scratches on the vehicle'spaint finish:

l Rinse off any dirt or other foreignmatter using lukewarm or cold waterbefore washing.

l Use plenty of lukewarm or cold waterand a soft cloth when washing thevehicle. Do not use a nylon cloth.

l Rub gently when washing or drying thevehicle.

l Take your vehicle only to a car washthat keeps its brushes well maintained.

l Don't use abrasive cleansers or waxthat contain abrasives.


Appearance Care

8-61


Form No.8U55-EA-05G

Black plate (310,1)

CAUTIONl Don't use steel wool, abrasivecleaners, or strong detergentscontaining highly alkaline or causticagents on chrome-plated or anodizedaluminum parts. This may damagethe protective coating; also, cleanersand detergents may discolor ordeteriorate the paint.

l To prevent damaging the antenna,remove it before entering a car washfacility or passing beneath a lowoverhead clearance.

Pay special attention to removing salt,dirt, mud, and other foreign material fromthe underside of the fenders, and makesure the drain holes in the lower edges ofthe doors and rocker panels are clean.

Insects, tar, tree sap, bird droppings,industrial fallout, and similar deposits candamage the finish if not removedimmediately. When prompt washing withplain water is ineffective, use a mild soapmade for use on vehicles.

Thoroughly rinse off all soap withlukewarm or cold water. Don't allow soapto dry on the finish.

After washing the vehicle, dry it with aclean chamois to prevent water spots fromforming.


Waxing

Your vehicle needs to be waxed whenwater no longer beads on the finish.Always wash and dry the vehicle beforewaxing it. In addition to the vehicle body,wax the metal trim to maintain its luster.

1. Use wax which contains no abrasives.Waxes containing abrasive will removepaint and could damage bright metalparts.

2. Use a good grade of natural wax formetallic, mica, and solid colors.

3. When waxing, coat evenly with thesponge supplied or a soft cloth.

4. Wipe off the wax with a soft cloth.

NOTE

A spot remover to remove oil, tar, andsimilar materials will usually also takeoff the wax. Rewax these areas even ifthe rest of the vehicle doesn't need it.

8-62


Appearance Care


Form No.8U55-EA-05G

Black plate (311,1)

qRepairing Damage to the Finish

Deep scratches or chips on the finishshould be repaired promptly. Exposedmetal quickly rusts and can lead to majorrepairs.

CAUTIONIf your Mazda is damaged and needsmetal parts repaired or replaced, makesure the body shop applies anti-corrosion materials to all parts, bothrepaired and new. This will preventthem from rusting.

qBright-Metal Maintenance

l Use tar remover to remove road tar andinsects. Never do this with a knife orsimilar tool.

l To prevent corrosion on bright-metalsurfaces, apply wax or chromepreservative and rub it to a high luster.

l During cold weather or in coastal areas,cover bright-metal parts with a coatingof wax or preservative heavier thanusual. It would also help to coat themwith noncorrosive petroleum jelly orsome other protective compound.

CAUTIONDon't use steel wool, abrasive cleaners,or strong detergents containing highlyalkaline or caustic agents on chrome-plated or anodized aluminum parts.This may result in damage to theprotective coating and causediscoloration or paint deterioration.

qUnderbody Maintenance

Road chemicals and salt used for ice andsnow removal and solvents used for dustcontrol may collect on the underbody. Ifnot removed, they will speed up rustingand deterioration of such underbody partsas fuel lines, frame, floor pan, and exhaustsystem, even though these parts may becoated with anti-corrosive material.

Thoroughly flush the underbody andwheel housings with lukewarm or coldwater at the end of each winter. Try alsoto do this every month.

Pay special attention to these areasbecause they easily hide mud and dirt. Itwill do more harm than good to wetdown the road grime without removingit.

The lower edges of doors, rocker panels,and frame members have drain holes thatshould not be clogged. Water trappedthere will cause rusting.



Appearance Care

8-63


Form No.8U55-EA-05G

Black plate (312,1)

qAluminumWheel Maintenance

A protective coating is provided over thealuminum wheels. Special care is neededto protect this coating.

NOTE

l Don't use a wire brush or anyabrasive cleaner, polishingcompound, or solvent on aluminumwheels. They may damage thecoating.

l Only use a mild soap or neutraldetergent and always use a sponge orsoft cloth to clean the wheels.Rinse thoroughly with lukewarm orcold water. Also, be sure to clean thewheels after driving on dusty orsalted roads. This helps preventcorrosion.

l Avoid washing your vehicle in anautomatic car wash that uses high-speed or hard brushes.

l If your aluminum wheels lose luster,wax the wheels.

Interior Care

qDashboard Precautions

Prevent caustic solutions such as perfumeand cosmetic oils from contacting thedashboard. They'll damage and discolor it.If these solutions get on the dashboard,wipe them off immediately.

CAUTIONDo not use glazing agents.Glazing agents contain ingredientswhich may cause discoloration,wrinkling, cracks and peeling.

qCleaning the Upholstery andInterior Trim

Vinyl

Remove dust and loose dirt from vinylwith a whisk broom or vacuum cleaner.Clean vinyl with a leather-and-vinylcleaner.

Leatherí

Real leather isn't uniform and may havescars, scratches, and wrinkles. Clean itwith a leather cleaner or mild soap.

Wipe it with a damp soft cloth; then dryand buff it with a dry soft cloth.

Fabric

Remove dust and loose dirt from fabricwith a whisk broom or vacuum cleaner.Clean it with a mild soap solution goodfor upholstery and carpets. Remove freshspots immediately with a fabric spotcleaner.

8-64


íSome models.

Appearance Care


Form No.8U55-EA-05G

Black plate (313,1)

To keep the fabric looking clean andfresh, take care of it. Otherwise its colorwill be affected, it can be stained easily,and its fire-resistance may be reduced.

CAUTIONUse only recommended cleaners andprocedures. Others may affectappearance and fire-resistance.

Piano black panelí

The following parts are fitted with panelsthat have been treated with a specialcoating that resists scratching.

l Instrument panel side garnish

l Steering wheel (partial)

When the panel needs to be cleaned, use asoft cloth to wipe off dirt from the surface.

NOTE

Scratches or nicks on the panelsresulting from the use of a hard brush orcloth may not be repairable.

qCleaning the Lap/Shoulder BeltWebbing

Clean the webbing with a mild soapsolution recommended for upholstery orcarpets. Follow instructions. Don't bleachor dye the webbing; this may weaken it.

After cleaning the belts, thoroughly drythe belt webbing and make sure there isno remaining moisture before retractingthem.

WARNINGDamaged Seat Belt:Using damaged seat belts isdangerous. In a collision, damagedbelts cannot provide adequateprotection. Have an Authorized MazdaDealer replace damaged beltsimmediately.

qCleaning the Window Interiors

If the windows become covered with anoily, greasy, or waxy film, clean themwith glass cleaner. Follow the directionson the container.

CAUTIONDon't scrape or scratch the inside of therear window. You may damage the rearwindow defroster grid.


Appearance Care

8-65íSome models.


Form No.8U55-EA-05G

Black plate (314,1)

8-66


Form No.8U55-EA-05G

Black plate (315,1)

9 Customer Information and ReportingSafety Defects

Important consumer information including warranties and add-on equipment.

Customer Assistance ............................... 9-2Customer Assistance (U.S.A.) ............ 9-2Customer Assistance (Canada) ........... 9-4Customer Assistance (Puerto Rico) .... 9-7Customer Assistance (Mexico) ........... 9-8

Mazda Importer/Distributors ............... 9-10Importer/Distributor .......................... 9-10Distributor in Each Area ................... 9-10

Warranty ................................................ 9-12Warranties for Your Mazda ............... 9-12Outside the United States .................. 9-13Outside Canada ................................. 9-14Registering Your Vehicle in A ForeignCountry (Except United States andCanada) ............................................. 9-15Add-On Non-Genuine Parts andAccessories ....................................... 9-16

Cell Phones ............................................. 9-17Cell Phones Warning ......................... 9-17

Type Approval of Equipment ............... 9-18Type Approval of Equipment ............ 9-18

Uniform Tire Quality Grading System(UTQGS) ................................................ 9-19

Uniform Tire Quality Grading System(UTQGS) .......................................... 9-19

Tire Information (U.S.A.) ..................... 9-21Tire Labeling ..................................... 9-21Location of the Tire Label(Placard) ............................................ 9-27Tire Maintenance .............................. 9-30Vehicle Loading ................................ 9-33Steps for Determining the Correct LoadLimit: ................................................ 9-40

Reporting Safety Defects ....................... 9-41Reporting Safety Defects (U.S.A.) .... 9-41Reporting Safety Defects (Canada) ... 9-42

Service Publications .............................. 9-43Service Publications .......................... 9-43

9-1


Form No.8U55-EA-05G

Black plate (316,1)

Customer Assistance (U.S.A.)Your complete and permanent satisfaction is our business. We are here to serve you. AllAuthorized Mazda Dealers have the knowledge and the tools to keep your Mazda vehiclein top condition.If you have any questions or recommendations for improvement regarding the service ofyour Mazda vehicle or servicing by Mazda Dealer personnel, we recommend that you takethe following steps:

NOTE

If it becomes necessary to have the components or wiring system for the supplementaryrestraint system modified to accommodate a person with certain medical conditions inaccordance with a certified physician, contact an Authorized Mazda Dealer.

qSTEP 1: Contact Your Mazda Dealer

Discuss the matter with an Authorized Mazda Dealer. This is the quickest and best way toaddress the issue.

l If your concern has not been resolved by the CUSTOMER RELATIONS, SALES,SERVICE, or PARTS MANAGER, then please contact the GENERAL MANAGER ofthe dealership or the OWNER.

l If it becomes necessary to have the components or wiring system for the supplementaryrestraint system modified to accommodate a person with certain medical conditions inaccordance with a certified physician, go to STEP2.

qSTEP 2: Contact Mazda North American Operations

If for any reason you feel the need for further assistance after contacting your dealershipmanagement and it becomes necessary to have the components or wiring system for thesupplementary restraint system modified to accommodate a person with certain medicalconditions in accordance with a certified physician, you can reach Mazda North AmericanOperations by one of the following ways.

Log on: at www.mazdaUSA.com

Answers to many questions, including how to locate or contact a local Mazda dealership inthe U.S., can be found here.

E-mail: click on “Contact Us” at the bottom of the page at www.mazdaUSA.com

By phone at: 1 (800) 222-5500

9-2

Customer Information and Reporting Safety Defects

Customer Assistance


Form No.8U55-EA-05G

Black plate (317,1)

By letter at:Attn: Customer AssistanceMazda North American Operations7755 Irvine Center DriveIrvine, CA 92618-2922P.O. Box 19734Irvine, CA 92623-9734

In order to serve you efficiently and effectively, please help us by providing the followinginformation:

1. Your name, address, and telephone number

2. Year and model of vehicle

3. Vehicle Identification Number (17 digits, noted on your registration or title or located onthe upper driver's side corner of the dash)

4. Purchase date and current mileage

5. Your dealer's name and location

6. Your question(s)

If you live outside the U.S.A., please contact your nearest Mazda Distributor.


Customer Assistance

9-3


Form No.8U55-EA-05G

Black plate (318,1)

Customer Assistance (Canada)

qSatisfaction Review Process

Your complete and permanent satisfaction is of primary concern to Mazda. All AuthorizedMazda Dealers have both the knowledge and tools to keep your Mazda in top condition. Inour experience, any questions, problems, or complaints regarding the operation of yourMazda or any other general service transactions are most effectively resolved by yourdealer. If the cause of your dissatisfaction cannot adequately be addressed by normaldealership procedures, we recommend that you take the following steps:

qSTEP 1: Contact the Mazda Dealer

Discuss the matter with a member of dealership management. If the Service Manager hasalready reviewed your concerns, contact the owner of the dealership or its GeneralManager.

qSTEP 2: Contact the Mazda Regional Office

If you feel that you still require assistance, ask the dealer Service Manager to arrange foryou to meet the local Mazda Service Representative. If more expedient, contact MazdaCanada Inc.Regional Office nearest you for such arrangements. Regional Office addressand phone numbers are shown (page 9-6).

qSTEP 3: Contact the Mazda Customer Relations Department

If still not substantially satisfied, contact the Customer Relations Department, MazdaCanada Inc., 55 Vogell Road, Richmond Hill, Ontario, L4B 3K5 Canada TEL:1 (800) 263-4680.Provide the Department with the following information:

1. Your name, address and telephone number


3. Vehicle Identification Number (VIN). Refer to the “Vehicle Identification Labels” pageof section 10 of this manual for the location of the VIN.

4. Purchase date

5. Present odometer reading


7. The nature of your problem and/or cause of dissatisfaction

The Department, in cooperation with the local Mazda Service Representative, will reviewthe case to determine if everything possible has been done to ensure your satisfaction.

9-4


Customer Assistance


Form No.8U55-EA-05G

Black plate (319,1)

Please recognize that the resolution of service problems in most cases requires the use ofyour Mazda dealer's service facilities, personnel and equipment. We urge you to follow theabove three steps in sequence for most effective results.

qMediation/Arbitration Program

Occasionally a customer concern cannot be resolved through Mazda's CustomerSatisfaction Program. If after exhausting the procedures in this manual your concern is stillnot resolved, you have another option.

Mazda Canada Inc. participates in an arbitration program administered by theCanadian Motor Vehicle Arbitration Plan (CAMVAP). CAMVAP will advise you abouthow your concern may be reviewed and resolved by an independent third party throughbinding arbitration.

Your complete satisfaction is the goal of Mazda Canada Inc. and our dealers.Mazda's participation in CAMVAP makes a valuable contribution to our achieving thatgoal. There is no charge for using CAMVAP. CAMVAP results are fast, fair and final as theaward is binding on both you and Mazda Canada Inc.

qCanadian Motor Vehicle Arbitration Plan (CAMVAP)

If a specific item of concern arises, where a solution cannot be reached between an owner,Mazda, and/or one of it's dealers (that all parties cannot agree upon), the owner may wishto use the services offered by the Canadian Motor Vehicle Arbitration Plan (CAMVAP).

CAMVAP uses the services of Provincial Administrators to assist consumers in schedulingand preparing for their arbitration hearings. However, before you can proceed withCAMVAP you must follow your Mazda dispute resolution process as outlined previously.


Customer Assistance

9-5


Form No.8U55-EA-05G

Black plate (320,1)

CAMVAP is fully implemented in all provinces and territories.Consumers wishing to obtain further information about the Program should contact theProvincial Administrator at 1 (800) 207-0685, or by contacting theCanadian Motor Vehicle Arbitration Plan Office at:

Canadian Motor Vehicle Arbitration Plan235 Yorkland Boulevard, suite 300North York, OntarioM2J 4Y8http://camvap.caProvincial Administrators may be reached locally as listed below:

Province/Territory CAMVAP Number

British Columbia & Yukon Territories 1 (800) 207-0685

Alberta & Northwest Territories 1 (800) 207-0685

Saskatchewan 1 (800) 207-0685

Manitoba 1 (800) 207-0685

Ontario 1 (800) 207-0685

Atlantic Canada 1 (800) 207-0685

Quebec 1 (800) 207-0685

qRegional Offices

REGIONAL OFFICES AREAS COVERED

MAZDA CANADA INC.WESTERN REGION

8171 ACKROYD ROADSUITE 2000

RICHMOND B.C.V6X 3K1

(604) 303-5670

ALBERTA,BRITISH COLUMBIA,

MANITOBA,SASKATCHEWAN,

YUKON

MAZDA CANADA INC.CENTRAL/ATLANTIC REGION

55 VOGELL ROAD,RICHMOND HILL,ONTARIO, L4B 3K5

(905) 787-7000

ONTARIO

MAZDA CANADA INC.QUEBEC REGION

6111 ROUTE TRANSCANADIENNE

POINTE CLAIRE, QUEBECH9R 5A5

(514) 694-6390

QUEBEC,NEW BRUNSWICK,NOVA SCOTIA,

PRINCE EDWARD ISLAND,NEWFOUNDLAND

9-6


Customer Assistance


Form No.8U55-EA-05G

Black plate (321,1)

Customer Assistance (Puerto Rico)Your complete and permanent satisfaction is our business. That is why all AuthorizedMazda Dealers have the knowledge and the tools to keep your Mazda vehicle in topcondition.If you have any questions or recommendations for improvement regarding the service ofyour Mazda vehicle or servicing by Mazda Dealer personnel, we recommend that you takethe following steps:

qSTEP 1

Discuss the matter with an Authorized Mazda Dealer. This is the quickest and best way toaddress the issue. If your concern has not been resolved by the CUSTOMER RELATIONS,SALES, SERVICE, or PARTS MANAGER, then please contact the GENERALMANAGER of the dealership or the OWNER.

qSTEP 2

If, after following STEP 1, you feel the need for further assistance, please contact yourarea's Mazda representative (Indicated on the next page).

Please help us by providing the following information:






6. Your question(s)


Customer Assistance

9-7


Form No.8U55-EA-05G

Black plate (322,1)

Customer Assistance (Mexico)Your complete and permanent satisfaction is our business. We are here to serve you. AllAuthorized Mazda Dealers have the knowledge and the tools to keep your Mazda vehiclein top condition.If you have any questions or recommendations for improvement regarding the service ofyour Mazda vehicle or servicing by Mazda Dealer personnel, we recommend that you takethe following steps:

qSTEP 1: Contact Your Mazda Dealer

Discuss the matter with an Authorized Mazda Dealer. This is the quickest and best way toaddress the issue.

l If your concern has not been resolved by the CUSTOMER RELATIONS, SALES,SERVICE, or PARTS MANAGER, then please contact the GENERAL MANAGER ofthe dealership or the OWNER.

l If it becomes necessary to have the components or wiring system for the supplementaryrestraint system modified to accommodate a person with certain medical conditions inaccordance with a certified physician, go to STEP2.

qSTEP 2: Contact Mazda Motor de Mexico

If for any reason you feel the need for further assistance after contacting your dealershipmanagement and it becomes necessary to have the components or wiring system for thesupplementary restraint system modified to accommodate a person with certain medicalconditions in accordance with a certified physician, you can reach Mazda Motor de Mexicoby one of the following ways.

Log on: at www.MazdaMexico.com.mx

Answers to many questions, including how to locate or contact a local Mazda dealership inMexico, can be found here.

E-mail: click on “Contactanos” at the top of the page at www.MazdaMexico.com.mx

By phone at:1 (866) 315 0220

9-8


Customer Assistance


Form No.8U55-EA-05G

Black plate (323,1)

By letter at:Attn: Customer AssistanceMazda North American Operations7755 Irvine Center DriveIrvine, CA 92618-2922P.O. Box 19734Irvine, CA 92623-9734

In order to serve you efficiently and effectively, please help us by providing the followinginformation:






6. Your question(s)


Customer Assistance

9-9


Form No.8U55-EA-05G

Black plate (324,1)

Importer/Distributor

qU.S.A.

Mazda North American Operations7755 Irvine Center DriveIrvine, CA 92618-2922 U.S.A.P.O. Box 19734Irvine, CA 92623-9734 U.S.A.TEL: 1 (800) 222-5500 (in U.S.A.)(949) 727-1990 (outside U.S.A.)

Distributor in Each Area

qCANADA

Mazda Canada Inc.55 Vogell Road, Richmond Hill,Ontario, L4B 3K5 CanadaTEL: 1 (800) 263-4680 (in Canada)(905) 787-7000 (outside Canada)

qPUERTO RICO/U.S. Virgin Island

Plaza Motors Corp. (Mazda de PuertoRico)P.O. Box 362722, San Juan, Puerto Rico00936-2722TEL: (787) 641-9300

qMEXICO

Mazda Motor de MexicoCircuito Guillermo Gonzalez CamarenaNo. 1500Col. Centro de Ciudad Santa Fe, 01210Mexico, D.F.TEL: 1 (866)315-0220

qGUAM

Triple J Motors157 South Marine Drive, Tamuning,GUAM 96911 USAP.O. Box 6066 Tamuning, Guam 96931TEL: (671) 649-6555

qSAIPAN

Pacific International Marianas, Inc.(d.b.a. Midway Motors)P.O. Box 887 Saipan, MP 96950TEL: (670) 234-7524

9-10


Mazda Importer/Distributors


Form No.8U55-EA-05G

Black plate (325,1)

Triple J Saipan, Inc.(d.b.a. Triple J Motors)P.O. Box 500487 Saipan, MP 96950-0487TEL: (670) 234-7133/3051

qAMERICAN SAMOA

Polynesia Motors, Inc.P.O. Box 1120, Pago Pago, AmericanSamoa 96799TEL: (684) 699-9347


Mazda Importer/Distributors

9-11


Form No.8U55-EA-05G

Black plate (326,1)

Warranties for Your Mazdal New Vehicle Limited Warranty

l Distributor Major Component Limited Warranty (Canada only)

l Safety Restraint System Limited Warranty

l Anti-perforation Limited Warranty

l Federal Emission Control Warranty (U.S.A. only)

l Emission Defect Warrantyl Emission Performance Warranty

l California Emission Control Warranty (U.S.A. only)

l Emission Control Warranty (Canada only)

l Replacement Parts and Accessories Limited Warranty

l Tire Warranty

NOTE

Detailed warranty information is provided with your Mazda.

9-12


Warranty


Form No.8U55-EA-05G

Black plate (327,1)

Outside the United StatesGovernment regulations in the United States require that automobiles meet specificemission regulations and safety standards. Therefore, vehicles built for use in the UnitedStates may differ from those sold in other countries.

The differences may make it difficult or even impossible for your vehicle to receivesatisfactory servicing in other countries. We strongly recommend that you NOT take yourMazda outside the United States. However, in the event that you are moving to Canadapermanently, Mazda vehicles built for use in the United States could be eligible forexportation to Canada with specific vehicle modifications to comply with the CanadianMotor Vehicle Safety requirements (CMVSS).

NOTE

The above is applicable for a permanent import/export situation and not related totravelers on vacation.

You may have the following problems if you do take your vehicle outside of the UnitedStates:

l Recommended fuel may be unavailable. Any kind of leaded fuel or low-octane fuel willaffect vehicle performance and damage the emission controls and engine.

l Proper repair facilities, tools, testing equipment, and replacement parts may not beavailable.

Please refer to your Manufacturer's Warranty Booklet for more information.


Warranty

9-13


Form No.8U55-EA-05G

Black plate (328,1)

Outside CanadaGovernment regulations in Canada require that automobiles meet specific emissionregulations and safety regulations. Therefore, vehicles built for use in Canada may differfrom those sold in other countries.

The differences may make it difficult or even impossible for your vehicle to receivesatisfactory servicing in other countries. We strongly recommend that you NOT take yourMazda outside Canada. However, in the event that you are moving to the United Statespermanently, Mazda vehicles built for use in Canada could be eligible for exportation to theUnited States with specific vehicle modifications to comply with the United States FederalMotor Vehicle Safety Standards (FMVSS).

NOTE

The above is applicable for a permanent import/export situation and not related totravelers on vacation.

You may have the following problems if you do take your vehicle outside of Canada:

l Recommended fuel may be unavailable. Any kind of leaded fuel or low-octane fuel willaffect vehicle performance and damage the emission controls and engine.

l Proper repair facilities, tools, testing equipment, and replacement parts may not beavailable.

Please refer to your Manufacturer's Warranty Booklet for more information.

9-14


Warranty


Form No.8U55-EA-05G

Black plate (329,1)

Registering Your Vehicle in A Foreign Country (ExceptUnited States and Canada)

Government regulations in your country could require that automobiles meet specificemission and safety standards.Vehicles built for your country may differ from those built for other countries. In additionto registration problems, satisfactory service may be difficult or even impossible in anothercountry.

The fuel specified for your vehicle may be unavailable.

Parts, servicing techniques, and tools necessary to maintain and repair your vehicle may beunavailable.

There might not be an Authorized Mazda Dealer in the country you plan to take yourvehicle.

The Mazda warranty is valid only in certain countries.


Warranty

9-15


Form No.8U55-EA-05G

Black plate (330,1)

Add-On Non-Genuine Parts and AccessoriesNon-genuine parts and accessories for Mazda vehicles can be found in stores.These may fit your vehicle, but they are not approved by Mazda for use with Mazdavehicles. When you install non-genuine parts or accessories, they could affect yourvehicle's performance or safety systems; the Mazda warranty doesn't cover this. Before youinstall any non-genuine parts or accessories, consult an Authorized Mazda Dealer.

WARNINGInstallation of Non-Genuine Parts or Accessories:Installation of non-genuine parts or accessories is dangerous. Improperly designedparts or accessories could seriously affect your vehicle's performance or safetysystems. This could cause you to have an accident or increase your chances of injuriesin an accident. Always consult an Authorized Mazda Dealer before you install non-genuine parts or accessories.

Add-On Electrical and Electronic Equipment:Incorrectly choosing or installing improper add-on equipment or choosing animproper installer is dangerous. Essential systems could be damaged, causing enginestalling, air-bag (SRS) activation, ABS inactivation, or a fire in the vehicle.Be very careful in choosing and installing add-on electrical equipment, such as mobiletelephones, two-way radios, stereo systems, and car alarm systems.

Mazda assumes no responsibility for death, injury, or expenses that may result from theinstallation of add-on non-genuine parts or accessories.

9-16


Warranty


Form No.8U55-EA-05G

Black plate (331,1)

Cell Phones Warning

WARNINGUse of Cell Phones and Other Devices by Driver:Use of any electrical devices such as cell phones, computers, portable radios, vehiclenavigation or other devices by the driver while the vehicle is moving is dangerous.Dialing a number on a cell phone while driving also ties-up the driver's hands. Use ofthese devices will cause the driver to be distracted and could lead to a serious accident.If a passenger is unable to use the device, pull off the right-of-way to a safe areabefore use. If use of a cell phone is necessary despite this warning, use a hands-freesystem to at least leave the hands free to drive the vehicle. Never use a cell phone orother electrical devices while the vehicle is moving and, instead, concentrate on thefull-time job of driving.Please comply with the legal regulations concerning the use of communicationequipment in vehicles in your country.


Cell Phones

9-17


Form No.8U55-EA-05G

Black plate (332,1)

Type Approval of Equipment

Immobilizer system

9-18


Type Approval of Equipment


Form No.8U55-EA-05G

Black plate (333,1)

Uniform Tire Quality Grading System (UTQGS)This information relates to the tire grading system developed by the U.S. NationalHighway Traffic Safety Administration for grading tires by tread wear, traction, andtemperature performance.

qTread Wear

The tread wear grade is a comparative rating based on the wear rate of the tire when testedunder controlled conditions on a specified government test course.For example, a tire graded 150 would wear one-and-a-half times as well on the governmentcourse as a tire graded 100.

The relative performance of tires depends upon the actual conditions of their use, however,and may depart significantly from the norm because of variations in driving habits, servicepractices and differences in road characteristics and climate.

qTraction-AA, A, B, C

The traction grades, from highest to lowest, are AA, A, B, and C. These grades representthe tire's ability to stop on wet pavement as measured under controlled conditions onspecified government test surfaces of asphalt and concrete. A tire marked C may have poortraction performance.

WARNINGThe traction grade assigned to this tire is based on braking (straight ahead) tractiontests and does not include acceleration cornering (turning), hydroplaning, or peaktraction characteristics.

qTemperature-A, B, C

The temperature grades A (the highest), B, and C, represent the tire's resistance to thegeneration of heat and its ability to dissipate heat when tested under controlled conditionson a specified indoor laboratory test wheel.Sustained high temperature can cause the material of the tire to degenerate and reduce tirelife, and excessive temperatures can lead to sudden tire failure.

Grade C corresponds to a level of performance which all passenger vehicle tires must meetunder the Federal Motor Vehicle Safety Standard No. 109. Grades B and A representhigher levels of performance on the laboratory test wheel than the minimum required bylaw.


Uniform Tire Quality Grading System (UTQGS)

9-19


Form No.8U55-EA-05G

Black plate (334,1)

WARNINGThe temperature grade for this tire is established for a tire that is properly inflated andnot overloaded. Excessive speed, underinflation, or excessive loading, eitherseparately or in combination, can cause heat buildup and possible tire failure.

These grades will be added to the sidewalls of passenger vehicle tires over the next severalyears according to a schedule established by the NHTSA and the tire manufacturers.

The grade of tires available as standard or optional equipment on Mazda vehicles may varywith respect to grade.

ALL PASSENGERVEHICLE TIRES MUST CONFORM TO THESE GRADES ANDTO ALL OTHER FEDERALTIRE-SAFETY REQUIREMENTS.

qUniform Tire Quality Grading

Quality grades can be found where applicable on the tire sidewall between tread shoulderand maximum section width.For example:Treadwear 200 Traction AATemperature A

TREADWEAR 200 TRACTION AA TEMPERATURE A

UTQGS MARK (example)

9-20


Uniform Tire Quality Grading System (UTQGS)


Form No.8U55-EA-05G

Black plate (335,1)

Tire LabelingFederal law requires tire manufacturers to place standardized information on the sidewall ofall tires. This information identifies and describes the fundamental characteristics of the tireand also provides a tire identification number for safety standard certification and in case ofa recall.

qInformation on Passenger Vehicle Tires

Please refer to the diagram below.

1. TIN: U.S. DOT tire identification number

2. Passenger car tire

3. Nominal width of tire in millimeters

4. Ratio of height to width (aspect ratio)

5. Radial

6. Rim diameter code

7. Load index & speed symbol

8. Severe snow conditions

9. Tire ply composition and materials used

10. Max. load rating


Tire Information (U.S.A.)

9-21


Form No.8U55-EA-05G

Black plate (336,1)

11. Tread wear, traction and temperature grades

12. Max. permissible inflation pressure

13. SAFETY WARNING

P215/65R15 95H is an example of a tire size and load index rating. Here is an explanationof the various components of that tire size and load index rating. Note that the tire size andload index rating may be different from the example.

P

Indicates a tire that may be installed on cars, SUVs, minivans and light trucks as designatedby the Tire and Rim Association (T&RA).

NOTE

If your tire size does not begin with a letter this may mean it is designated by eitherETRTO (European Tire and Rim Technical Organization) or JATMA (Japan TireManufacturing Association).

215

“215” is the nominal width of the tire in millimeters. This three-digit number gives thewidth in millimeters of the tire from sidewall edge to sidewall edge. In general, the largerthe number, the wider the tire.

65

“65” is the aspect ratio. This two-digit number indicates the tire's ratio of height to width.

R

“R” is the tire construction symbol. R indicates “Radial ply construction”.

15

“15” is the wheel rim diameter in inches.

95

“95” is the Load Index. This two-or three-digit number indicates how much weight eachtire can support.

9-22




Form No.8U55-EA-05G

Black plate (337,1)

H

“H” is the speed rating. The speed rating denotes the maximum speed for which the use ofthe tire is rated.

Letter Rating Speed Rating

Q 99 mph

R 106 mph

S 112 mph

T 118 mph

U 124 mph

H 130 mph

V 149 mph

W 168* mph

Y 186* mph

* For tires with a maximum speed capability over 149 mph, tire manufacturers sometimes use the letters ZR. Fortires with a maximum speed capability over 186 mph, tire manufacturers always use the letters ZR.

M+S or M/S: Mud and Snow

AT: All Terrain.AS: All Season. The “M+S” or “M/S” indicates that the tire has some functional use inmud and snow.

U.S. DOT Tire Identification Number (TIN)

This begins with the letters “DOT” which indicates the tire meets all federal standards. Thenext two numbers or letters are the plant code where it was manufactured, and the last fournumbers represent the week and year the tire was manufactured. For example, the numbers457 means the 45st week of 1997. After 2000 the numbers go to four digits. For example,the number 2102 means the 21th week of 2002. The other numbers are marketing codesused at the manufacturer's discretion. This information is used to contact consumers if a tiredefect requires a recall.

Tire Ply Composition and Materials Used

The number of plies indicates the number of layers of rubber-coated fabric in the tire. Ingeneral, the greater the number of plies, the more weight a tire can support. Tiremanufacturers also must indicate the tire materials, which include steel, nylon, polyester,and other.

Maximum Load Rating

This number indicates the maximum load in kilograms and pounds that can be carried bythe tire.

Maximum Permissible Inflation Pressure

This number is the greatest amount of air pressure that should ever be put in the tire undernormal driving conditions.



9-23


Form No.8U55-EA-05G

Black plate (338,1)

Tread Wear, Traction and Temperature Grades

Tread wear: The tread wear grade is a comparative rating based on the wear rate of the tirewhen tested under controlled conditions on a specified government test course. Forexample, a tire graded 150 would wear one and one-half (1 1/2) times as well on thegovernment course as a tire graded 100.Traction: The traction grades, from highest to lowest are AA, A, B, and C. The gradesrepresent the tire's ability to stop on wet pavement as measured under controlled conditionson specified government test surfaces of asphalt and concrete. A tire marked C may havepoor traction performance.Temperature: The temperature grades are A (the highest), B and C, representing the tire'sresistance to the generation of heat and its ability to dissipate heat when tested undercontrolled conditions on a specified indoor laboratory test wheel.

Snow Tires

In some heavy snow areas, local governments may require true snow tires, those with verydeeply cut tread. These tires should only be used in pairs or placed on all four wheels.Make sure you purchase snow tires that are the same size and construction type as the othertires on your vehicle.

SAFETYWARNING

The following safety warning appears on the tire's sidewall.SERIOUS INJURY MAY RESULT FROM:

l EXPLOSION OF TIRE/RIM ASSEMBLY DUE TO IMPROPER MOUNTING-MATCH TIRE DIAMETER TO RIM DIAMETER; NEVER EXCEED 40 psi (275 kPa)TO SEAT BEADS-ONLY SPECIALLY TRAINED PERSONS SHOULD MOUNTTIRES.

l TIRE FAILURE DUE TO UNDER-INFLATION/OVERLOADING/DAMAGE-FOLLOW OWNER'S MANUAL AND PLACARD IN VEHICLE-FREQUENTLYCHECK INFLATION PRESSURE AND INSPECT FOR DAMAGE.

9-24




Form No.8U55-EA-05G

Black plate (339,1)

qInformation on Temporary Tires

Please refer to the diagram below.

1. Temporary tires

2. Nominal width of tire in millimeters

3. Ratio of height to width (aspect ratio)

4. Diagonal

5. Rim diameter code

T115/70D 16 is an example of a tire size and load index rating. Here is an explanation ofthe various components of that tire size and load index rating. Note that the tire size andload index rating may be different from the example.

T

Indicates a tire that may be installed on cars, SUVs, minivans and light trucks as designatedby the Tire and Rim Association (T&RA).

115

“115” is the nominal width of the tire in millimeters. This three-digit number gives thewidth in millimeters of the tire from sidewall edge to sidewall edge. In general, the largerthe number, the wider the tire.

70

“70” is the aspect ratio. This two-digit number indicates the tire's ratio of height to width.



9-25


Form No.8U55-EA-05G

Black plate (340,1)

D

“D” is the tire construction symbol. D indicates “diagonal ply construction”.

16

“16” is the wheel rim diameter in inches.

9-26




Form No.8U55-EA-05G

Black plate (341,1)

Location of the Tire Label (Placard)You will find the tire label containing tire inflation pressure by tire size and other importantinformation on the driver's side B-pillar or on the edge of the driver's door frame.

SAMPLE

qRecommended Tire Inflation Pressure

On the tire label you will find the recommended tire inflation pressure in both kPa and psifor the tires installed as original equipment on the vehicle. It is very important that theinflation pressure of the tires on your vehicle is maintained at the recommended pressure.You should check the tire pressure regularly to insure that the proper inflation pressure ismaintained.

Refer to Tires on page 10-7.

NOTE

Tire pressures listed on the vehicle placard or tire information label indicate therecommended cold tire inflation pressure, measured when the tires are cold, after thevehicle has been parked for at least 3 hours. As you drive, the temperature in the tirewarms up, increasing the tire pressure.



9-27


Form No.8U55-EA-05G

Black plate (342,1)

WARNINGTire Under-Inflation:Driving your vehicle with under-inflated tires is dangerous.Under-inflation is the most common cause of failures in any kind of tire and mayresult in severe cracking, tread separation or “blowout”, with unexpected loss ofvehicle control and increased risk of injury. Under-inflation increases sidewall flexingand rolling resistance, resulting in heat buildup and internal damage to the tire. Itresults in unnecessary tire stress, irregular wear, loss of control and accidents. A tirecan lose up to half of its air pressure and not appear to be flat!It is impossible to determine whether or not tires are properly inflated just by lookingat them.Always check the tire inflation pressures on a regular basis according to therecommended tire inflation pressure on the tire label and in conjunction with theinformation in this owner's manual.

qChecking Tire Pressure

1. When you check the air pressure, make sure the tires are cold ―meaning they are nothot from driving even a mile.

2. Remove the cap from the valve on one tire.

3. Firmly press a tire gauge onto the valve.

4. Add air to achieve recommended air pressure.

5. If you overfill the tire, release air by pushing on the metal stem in the center of thevalve. Then recheck the pressure with your tire gauge.

6. Replace the valve cap.

7. Repeat with each tire, including the spare.

NOTE

Some spare tires require higher inflation pressure.

8. Visually inspect the tires to make sure there are no nails or other objects embedded thatcould poke a hole in the tire and cause an air leak.

9. Check the sidewalls to make sure there are no gouges, cuts, bulges, cracks or otherirregularities.

9-28




Form No.8U55-EA-05G

Black plate (343,1)

NOTE

Warm tires normally exceed recommended pressures. Don't release air from warm tiresto adjust the pressure.Under-inflation can cause serious failures and accidents.Over-inflation can produce a harsh ride and the greater possibility of damage from roadhazards.

qGlossary of Terms

Tire Placard: A label indicating the OE tire sizes, recommended inflation pressure, andthe maximum weight the vehicle can carry.Tire Identification Number (TIN): A number on the sidewall of each tire providinginformation about the tire brand and manufacturing plant, tire size, and date ofmanufacture.Inflation Pressure: A measure of the amount of air in a tire.kPa: Kilopascal, the metric unit for air pressure.psi: Pounds per square inch, the English unit for air pressure.B-pillar: The structural member at the side of the vehicle behind the front door.Original Equipment (OE): Describes components originally equipped on the vehicle.Vehicle Load Limit: The maximum value of the combined weight of occupants and cargo.Bead Area of the Tire: Area of the tire next to the rim.Sidewall Area of the Tire: Area between the bead area and the tread.Tread Area of the Tire: Area on the perimeter of the tire that contacts the road when it'smounted on the vehicle.

Seating capacity means the total allowable number of vehicle occupants. Seating capacityis described on the tire label.

Production options weight is the combined weight of installed regular production optionsweighing over 2.3 kilograms in excess of the standard items which they replace, and notpreviously considered in the curb weight or accessory weight, including heavy duty brakes,ride levelers, roof rack, heavy duty battery, and special trim.

Rim is the metal support (wheel) for a tire or a tire and tube assembly upon which the tirebeads are seated.



9-29


Form No.8U55-EA-05G

Black plate (344,1)

Tire MaintenanceImproper or inadequate vehicle maintenance can cause tires to wear abnormally. Here aresome important maintenance points:

qTire Inflation Pressure

Inspect all tire pressure monthly (including the spare) when the tires are cold. Maintainrecommended pressures for the best ride, top handling, and minimum tire wear. Use thepressures specified on the vehicle tire information placard or tire label for optimum service.

qTire Rotation

To equalize tread wear, rotate the tires every 12,000 km (7,500 miles) or sooner if irregularwear develops. During rotation, inspect them for correct balance.

Forward

Inspect the tires for uneven wear and damage. Abnormal wear is usually caused by one or acombination of the following:

l Incorrect tire pressure

l Improper wheel alignment

l Out-of-balance wheel

l Severe braking

After rotation, inflate all tire pressures to specification (page 10-7) and inspect the lug nutsfor tightness.

9-30




Form No.8U55-EA-05G

Black plate (345,1)

CAUTIONRotate unidirectional tires and radial tires that have an asymmetrical tread pattern orstuds only from front to rear, not from side to side. Tire performance will be weakened ifrotated from side to side.

(With limited-slip differential)Don't use the following:

l Tires not of the designated size

l Tires of different sizes or types at the same time

l Tires not sufficiently inflated

If these instructions aren't followed, the rotation of the left and right wheels will bedifferent and will thus apply a constant load on the limited-slip differential.This will cause a malfunction.

qReplacing a Tire

WARNINGWorn Tires:Driving with worn tires is dangerous. Reduced braking, steering, and traction couldresult in an accident. Always use tires that are in good condition.

If a tire wears evenly, a wear indicator will appear as a solid band across the tread. Replacethe tire when this happens.

New tread

Tread wear indicator

Worn tread

You should replace it before the band is across the entire tread.



9-31


Form No.8U55-EA-05G

Black plate (346,1)

NOTE

Tires degrade over time, even when they are not being used on the road. It isrecommended that tires generally be replaced when they are 6 years or older. Heatcaused by hot climates or frequent high loading conditions can accelerate the agingprocess. You should replace the spare tire when you replace the other road tires due tothe aging of the spare tire. Regarding the manufacturing week and year is indicated with4 digit. Refer to The tire labeling on page 9-21.

qSafety Practices

The way you drive has a great deal to do with your tire mileage and safety. So cultivategood driving habits for your own benefit.

l Observe posted speed limits

l Avoid fast starts, stops and turns

l Avoid potholes and objects on the road

l Do no run over curbs or hit the tire against the curb when parking

CAUTIONIf you feel a sudden vibration or ride disturbance while driving or you suspect your tireor vehicle has been damaged, immediately reduce your speed. Drive with caution untilyou can safely pull off the road. Stop and inspect the tire for damage. If the tire is under-inflated or damaged, deflate it, remove the tire and rim and replace it with your sparetire. If you cannot detect a cause, have the vehicle towed to the nearest vehicle or tiredealer to have the vehicle inspected.

9-32




Form No.8U55-EA-05G

Black plate (347,1)

Vehicle Loading

NOTE

This vehicle is not designed to tow a trailer.

This section will guide you in the proper loading of your vehicle and/or trailer, to keepyour loaded vehicle weight within its design rating capability, with or without a trailer.Properly loading your vehicle will provide maximum return of vehicle design performance.Before loading your vehicle, familiarize yourself with the following terms for determiningyour vehicle's weight ratings, with or without a trailer, from the vehicle's SafetyCertification Label and Tire and Load Information Label:

WARNINGOverloaded Vehicle:Overloading a vehicle is dangerous. The results of overloading can have seriousconsequences in terms of passenger safety. Too much weight on a vehicle's suspensionsystem can cause spring or shock absorber failure, brake failure, handling or steeringproblems, irregular tire wear, tire failure or other damage.Overloading makes a vehicle harder to drive and control. It also increases the distancerequired for stopping. In cases of serious overloading, brakes can fail completely,particularly on steep grades. The load a tire will carry safely is a combination of thesize of the tire, its load range, and corresponding inflation pressure.Never overload the vehicle and always observe the vehicle's weight ratings from thevehicle's Safety Certification and Tire and Load Information labels.

Base Curb Weight is the weight of the vehicle including a full tank of fuel and allstandard equipment. It does not include passengers, cargo, or optional equipment.



9-33


Form No.8U55-EA-05G

Black plate (348,1)

Vehicle Curb Weight is the weight of your new vehicle when you picked it up from yourdealer plus any aftermarket equipment.

PAYLOAD

Payload is the combined weight of cargo and passengers that the vehicle is designed tocarry. The maximum payload for your vehicle can be found on the Tire and LoadInformation label on the driver's door frame or door pillar. Look for “THE COMBINEDWEIGHT OF OCCUPANTS AND CARGO SHOULD NEVER EXCEED XXX kg orXXX lbs” for your maximum payload. The payload listed on the tire label is the maximumpayload for the vehicle as built by the assembly plant. If any aftermarket or dealer installedequipment has been installed on the vehicle, the weight of the equipment must besubtracted from the payload listed on the tire label in order to be accurate.

9-34




Form No.8U55-EA-05G

Black plate (349,1)

SAMPLE

CARGO

Cargo Weight includes all weight added to the Base Curb Weight, including cargo andoptional equipment. When towing, trailer tongue load or king pin weight is also part ofcargo weight.

The cargo weight limit decreases depending on the number of vehicle occupants. The cargoweight limit can be calculated by subtracting the total weight of the vehicle occupants fromthe “combined weight of occupants and cargo should never exceed” value on the tire label.



9-35


Form No.8U55-EA-05G

Black plate (350,1)

Examples: Based on a single occupant weight of 68 kg, and a value of 385 kg for the“combined weight of occupants and cargo should never exceed”:The cargo weight limit with one occupant is 385 kg _ 68 kg = 317 kgThe cargo weight limit with two occupants is 385 kg _ (68 × 2) kg = 249 kgIf the weight of the occupant increases, the cargo weight limit decreases by that much.

GAW (Gross Axle Weight) is the total weight placed on each axle (front and rear) -including vehicle curb weight and all payload.

GAWR (Gross Axle Weight Rating) is the maximum allowable weight that can be carriedby a single axle (front or rear). These numbers are shown on the Safety ComplianceCertification Label located on the driver's door frame or door pillar. The total load oneach axle must never exceed its GAWR.

GVW

GVW (Gross Vehicle Weight) is the Vehicle Curb Weight + cargo + passengers.

GVWR (Gross Vehicle Weight Rating) is the maximum allowable weight of the fullyloaded vehicle (including all options, equipment, passengers and cargo). The GVWR isshown on the Safety Compliance Certification Label located on the driver's doorframe or door pillar. The GVW must never exceed the GVWR.

9-36




Form No.8U55-EA-05G

Black plate (351,1)

SAMPLE

WARNINGExceeding Axle Weight Rating Limits:Exceeding the Safety Certification Label axle weight rating limits is dangerous andcould result in death or serious injury as a result of substandard vehicle handling,performance, engine, transmission and/or structural damage, serious damage to thevehicle, or loss of control.Always keep the vehicle within the axle weight rating limits.



9-37


Form No.8U55-EA-05G

Black plate (352,1)

GCW

GCW (Gross Combined Weight) is the weight of the loaded vehicle (GVW) plus theweight of the fully loaded trailer.

GCWR (Gross Combined Weight Rating) is the maximum allowable weight of thevehicle and the loaded trailer - including all cargo and passengers - that the vehicle canhandle without risking damage. (Important: The towing vehicle's braking system is ratedfor operation at GVWR, not at GCWR. Separate functional brakes should be used for safecontrol of towed vehicles and for trailers weighing more than 1,500 lbs). The GCW mustnever exceed the GCWR.

Maximum Loaded Trailer Weight is the highest possible weight of a fully loaded trailerthe vehicle can tow. It assumes a vehicle with only mandatory options, no cargo (internal orexternal), a tongue load of 10_15% (conventional trailer) or king pin weight of 15_25%(fifth-wheel trailer), and driver only (150 lbs). Consult your dealership (or the RVandTrailer Towing Guide provided by your dealership) for more detailed information.Tongue Load or Fifth-Wheel King Pin Weight refers to the amount of the weight that atrailer pushes down on a trailer hitch.

Examples: For a 5000 lb conventional trailer, multiply 5000 by 0.10 and 0.15 to obtain aproper tongue load range of 500 to 750 lbs. For an 11,500 lb fifth-wheel trailer, multiply by0.15 and 0.25 to obtain a proper king pin load range of 1,725 to 2,875 lbs.

9-38




Form No.8U55-EA-05G

Black plate (353,1)

WARNINGExceeding GVWR or GAWR Specifications:Exceeding the GVWR or the GAWR specified on the certification label is dangerous.Exceeding any vehicle rating limitation could result in a serious accident, injury, ordamage to the vehicle.Do not use replacement tires with lower load carrying capacities than the originalsbecause they may lower the vehicle's GVWR and GAWR limitations. Replacementtires with a higher limit than the originals do not increase the GVWR and GAWRlimitations.Never exceed the GVWR or the GAWR specified on the certification label.



9-39


Form No.8U55-EA-05G

Black plate (354,1)

Steps for Determining the Correct Load Limit:Steps for Determining Correct Load Limit:

(1) Locate the statement “The combined weight of occupants and cargo should neverexceed XXX kg or XXX lbs” on your vehicle's placard.

(2) Determine the combined weight of the driver and passengers that will be riding in yourvehicle.

(3) Subtract the combined weight of the driver and passengers from XXX kg or XXX lbs.

(4) The resulting figure equals the available amount of cargo and luggage load capacity.For example, if the “XXX” amount equals 1400 lbs. and there will be five 150 lbpassengers in your vehicle, the amount of available cargo and luggage load capacity is650 lbs. (1400_ 750 (5 × 150) = 650 lbs.)

(5) Determine the combined weight of luggage and cargo being loaded on the vehicle.That weight may not safely exceed the available cargo and luggage load capacitycalculated in Step 4.

(6) If your vehicle will be towing a trailer, the load from your trailer will be transferred toyour vehicle. Consult this manual to determine how this reduces the available cargoand luggage load capacity of your vehicle.

9-40




Form No.8U55-EA-05G

Black plate (355,1)

Reporting Safety Defects (U.S.A.)

If you believe that your vehicle has a defect which could cause a crash or couldcause injury or death, you should immediately inform the National HighwayTraffic Safety Administration (NHTSA) in addition to notifying Mazda MotorCorporation (Your Mazda Importer/Distributor).

If NHTSA receives similar complaints, it may open an investigation, and if itfinds that a safety defect exists in a group of vehicles, it may order a recall andremedy campaign. However, NHTSA cannot become involved in individualproblems between you, your dealer, or Mazda Motor Corporation (Your MazdaImporter/Distributor).

To contact NHTSA, you may call the Vehicle Safety Hotline toll-free at 1-888-327-4236 (TTY: 1-800-424-9153) ; go to http://www.safercar.gov; or write to:Administrator, NHTSA, 400 Seventh Street, SW., Washington, DC 20590. Youcan also obtain other information about motor vehicle safety from http://www.safercar.gov.

NOTE

If you live in the U.S.A., all correspondence to Mazda Motor Corporation should beforwarded to:

Mazda North American Operations7755 Irvine Center DriveIrvine, California 92618-2922P.O. Box 19734Irvine, CA 92623-9734Customer Assistance Center or toll free at 1 (800) 222-5500

If you live outside of the U.S.A., please contact the nearest Mazda Distributor shown(page 9-10) in this booklet.


Reporting Safety Defects

9-41


Form No.8U55-EA-05G

Black plate (356,1)

Reporting Safety Defects (Canada)Canadian customers who wish to report a safety-related defect to Transport Canada, DefectInvestigations and Recalls, may telephone the toll free hotline 1-800-333-0510, or contactTransport Canada by mail at: Transport Canada, ASFAD, Place de Ville Tower C, 330Sparks Street, Ottawa ON K1A 0N5.

For additional road safety information, please visit the Road Safety website at:http://www.tc.gc.ca/roadsafety/menu.htm

9-42


Reporting Safety Defects


Form No.8U55-EA-05G

Black plate (357,1)

Service PublicationsFactory-authorized Mazda service publications are available for owners who wish to dosome of their own maintenance and repair.

When requesting any of our publications through an Authorized Mazda Dealer, refer to thechart below.

If they don't have what you need in stock, they can order it for you.

PUBLICATION ORDER NUMBER PUBLICATION DESCRIPTION

9999-95-017B-06 2006 WORKSHOP MANUAL (English)

9999-MX-017B-06 2006 WORKSHOP MANUAL (Spanish)

9999-95-019G-06 2006 WIRING DIAGRAM (English)

9999-MX-019G-06 2006 WIRING DIAGRAM (Spanish)

9999-95-038C-06 (U.S.A. only) 2006 OWNER'S MANUAL

9999-EC-038C-06 (Canada only) 2006 OWNER'S MANUAL

9999-PR-038C-06 (Puerto Rico, Mexico only) 2006 OWNER'S MANUAL

qWORKSHOP MANUAL:

Covers recommended maintenance and repair procedures of the drive train, body andchassis.

qWIRING DIAGRAM:

Provides electrical schematics as well as component location for the entire electricalsystem.

qOWNER'S MANUAL:

This booklet contains information regarding the proper care and operation of your vehicle.This is not a technician's manual.


Service Publications

9-43


Form No.8U55-EA-05G

Black plate (358,1)

9-44


Form No.8U55-EA-05G

Black plate (359,1)

10 Specifications

Technical information about your Mazda.

Identification Numbers ............................................................... 10-2Vehicle Information Labels ..................................................... 10-2

Specifications ............................................................................... 10-4Specifications .......................................................................... 10-4

10-1


Form No.8U55-EA-05G

Black plate (360,1)

Vehicle Information Labels

qVehicle Identification Number

The vehicle identification number legallyidentifies your vehicle. The number is ona plate attached the cowl panel located onthe left corner of the dashboard. This platecan easily be seen through the windshield.

qMotor Vehicle Safety Standard Label

qChassis Number

qVehicle Emission ControlInformation Label

qTire Pressure Label

10-2

Identification Numbers


Form No.8U55-EA-05G

Black plate (361,1)

qEngine Number

Forward

Identification Numbers

10-3


Form No.8U55-EA-05G

Black plate (362,1)

Specifications

qEngine

ItemModel

2.0-liter engine 2.3-liter engine

Type DOHC-16V in-line, 4-cylinder

Bore×Stroke 87.5 × 83.1 mm (3.44 × 3.27 in) 87.5 × 94.0 mm (3.44 × 3.70 in)

Displacement 1,999 ml (1,999 cc, 121.9 cu in) 2,261 ml (2,261 cc, 137.9 cu in)

Compression ratio 10.0 9.7

qElectrical System

Item Classification

Battery 12V-40AH/5HR, 12V-52AH/5HR, 12V-55AH/5HR

Alternator 12 V - 90 A

Starter2.0-liter engine 12 V - 1.0 kW

2.3-liter engine 12 V - 1.4 kW

Spark-plug number LFG1 18 110C*

Spark-plug gap 1.25―1.35mm (0.050―0.053 in)

* ex factory

NOTE

When cleaning the iridium plugs, do not use a wire brush. The fine particulate coating onthe iridium alloy and platinum tips could be damaged.

qLubricant Quality

Lubricant Classification

Engine oilRefer to the recommended SAE viscosity numbers on page8-18.

Manual transaxle oil

Any temperatureAPI Service GL-4 or GL-5

SAE 75W-90

Above 10°C (50°F)API Service GL-4 or GL-5

SAE 80W-90

Automatic transaxle fluid ATF M-V

Power steering fluid ATF M-III or equivalent (e.g. Dexron® III)

Brake/Clutch fluid SAE J1703 or FMVSS116 DOT-3

10-4

Specifications


Form No.8U55-EA-05G

Black plate (363,1)

qCapacities

(Approximate Quantities)

Item Capacity

Engine oil

With oil filterreplacement

4.3 L (4.5 US qt, 3.8 Imp qt)

Without oil filterreplacement

3.9 L (4.1 US qt, 3.4 Imp qt)

CoolantWith heater 7.5 L (7.9 US qt, 6.6 Imp qt)

Without heater 6.9 L (7.3 US qt, 6.1 Imp qt)

Manual transaxle oil 2.87 L (3.03 US qt, 2.53 Imp qt)

Automatic transaxle fluid4-speed transaxle 7.2 L (7.6 US qt, 6.3 Imp qt)

5-speed transaxle 8.14 L (8.60 US qt, 7.16 Imp qt)

Fuel tank 55 L (15 US gal, 12 Imp gal)

Check oil and fluid levels with dipsticks or reservoir gauges.

qDimensions

ItemModel

4 Door 5 Door

Overall length(STD) 4,530 mm (178.3 in) ―

(SAP) 4,540 mm (178.7 in) 4,485 mm (176.6 in)

Overall width* 1,755 mm (69.1 in) 1,755 mm (69.1 in)

Overall height 1,465 mm (57.7 in) 1,465 mm (57.7 in)

Front tread 1,530 mm (60.2 in) 1,530 mm (60.2 in)

Rear tread 1,515 mm (59.6 in) 1,515 mm (59.6 in)

Wheelbase 2,640 mm (103.9 in) 2,640 mm (103.9 in)

* With side protector

qWeights

4 Door2.0-liter engine

ItemWeight

Manual transaxle Automatic transaxle

GVWR (Gross Vehicle Weight Rating)1,702 kg (3,752 lb),1,708 kg (3,765 lb)*1

1,721 kg (3,794 lb),1,727 kg (3,807 lb)*1

GAWR (Gross Axle Weight Rating)Front 904 kg (1,993 lb) 924 kg (2,037 lb)

Rear798 kg (1,759 lb),804 kg (1,772 lb)*1

797 kg (1,757 lb),803 kg (1,770 lb)*1

*1 P-ZEV

Specifications

10-5


Form No.8U55-EA-05G

Black plate (364,1)

2.3-liter engine

ItemWeight


GVWR (Gross Vehicle Weight Rating) 1,732 kg (3,818 lb) 1,760 kg (3,880 lb)


Rear 804 kg (1,772 lb) 803 kg (1,770 lb)

5 Door

ItemWeight


GVWR (Gross Vehicle Weight Rating) 1,743 kg (3,843 lb) 1,771 kg (3,904 lb)


Rear 813 kg (1,793 lb) 811 kg (1,788 lb)

qAir Conditioner

Gas complies with SAE J639 Maximum operating charge

HFC134a (R-134a) 0.5 kg (17.55 oz)

qLight Bulbs

Exterior light

Light bulbCategory

Wattage ECE R SAE

Headlights

High beam 60 HB3 ―

Low beamHalogen 55 H7 ―

Xenon fusion 35 D2S ―

Front turn signal lights/Side-marker lights 27/8 ― #1157NA

Fog lights í 55 H11 ―

Side turn signal lights *1 5 WY5W ―

High-mount brake light 18 W16W #921

Rear turn signal lights 21 W21W #7440

Brake lights/TaillightsWith Non-LED bulb 21/5 W21/5W #7443

With LED bulb *2 4/0.8 ― ―

Reverse light 21 W21W #7440

License plate light 5 W5W ―

*1 Bulb replacement is not possible because it is built into the unit. Replace the unit.*2 Bulb replacement is not possible. The rear combination component must be replaced.

10-6 íSome models.

Specifications


Form No.8U55-EA-05G

Black plate (365,1)

Interior light

Light bulbCategory

Wattage ECE R

Trunk light (4 Door)

5

W5W

Luggage compartment light (5 Door) ―

Overhead light/Map lights (Front)í W5W

Overhead light (Rear) 10 ―

qTires

NOTE

The tires have been optimally matched with the chassis of your vehicle.When replacing tires, Mazda recommends that you replace tires of the same typeoriginally fitted to your vehicle. For details, contact an Authorized Mazda Dealer.

Check the tire pressure label for tire size and inflation pressure.Refer to Tire Inflation Pressure on page 8-37.Standard tire

Tire size Inflation pressure Inflation pressure

P195/65R15 89H 230 kPa (33 psi) 230 kPa (33 psi)

P205/55R16 89H 220 kPa (32 psi) 220 kPa (32 psi)

P205/50R17 88V 220 kPa (32 psi) 220 kPa (32 psi)

Temporary spare tire

Tire size Inflation pressure

T115/70D15420 kPa (60 psi)

T125/70D16

qFuses

Refer to the fuse rating on page 8-52.

Specifications

10-7íSome models.


Form No.8U55-EA-05G

Black plate (366,1)

10-8


Form No.8U55-EA-05G

Black plate (367,1)

11 Index

11-1


Form No.8U55-EA-05G

Black plate (368,1)

A

Add-On Non-Genuine Parts andAccessories ....................................... 9-16Air Bag Systems ............................... 2-38Air Filter ............................................ 8-29Ambient Temperature Display .......... 6-46Antenna ............................................. 6-16Anti-Lock Brake System (ABS) ......... 5-6

Warning light ............................... 5-7Appearance Care ............................... 8-59Ashtray .............................................. 6-50Audio System ................................... 6-16

Audio control switch .................. 6-38Audio set .................................... 6-23Operating tips for audiosystem ........................................ 6-16Safety certification ..................... 6-41

Automatic TransaxleDriving tips ................................ 5-17Fluid ........................................... 8-25Manual shift mode ..................... 5-13Shift-lock override ..................... 5-12Shift-lock system ....................... 5-12Transaxle ranges ......................... 5-11

B

BatteryEmergency starting .................... 7-14Maintenance ............................... 8-34Specifications ............................. 10-4

Beep SoundsIgnition key reminder ................. 5-45Lights-on reminder ..................... 5-45Seat belt warning beep Sounds... 5-45Tire inflation pressure warningbeep ............................................ 5-45

B

Before Starting the Engine .................. 4-6After getting in ............................. 4-6Before getting in .......................... 4-6

Body Lubrication .............................. 8-28Bottle Holder ..................................... 6-52Brake/Clutch

Fluid ........................................... 8-23Brakes

Anti-lock brake system (ABS) ..... 5-6Brakes assist ................................. 5-8Foot brake .................................... 5-4Parking brake ............................... 5-5Warning light ............................... 5-6

Break-In Period ................................... 4-7Bulb Replacement ............................. 8-42

C

Capacities .......................................... 10-5Carbon Monoxide ............................... 4-5Cargo Securing Loops ...................... 6-53Cargo Sub-Compartment .................. 6-53Catalytic Converter ............................. 4-3Cell Phones ....................................... 9-17Center Console .................................. 6-53Child Restraint

Child restraint precautions ......... 2-21Installing child-restraintsystems ....................................... 2-25LATCH child-restraintsystems ....................................... 2-33

Child Safety Locks for Rear Doors ..... 3-9Cigarette Lighter ............................... 6-50Climate Control System ...................... 6-2

Gas specifications ...................... 10-6Clock ................................................. 6-46Cruise Control ................................... 5-18Cup Holder ........................................ 6-51

11-2

Index


Form No.8U55-EA-05G

Black plate (369,1)

C

Customer Assistance ........................... 9-2

D

Dashboard Illumination .................... 5-32Daytime Running Lights ................... 5-48Defroster

Rear window .............................. 5-54Dimensions ....................................... 10-5Door Locks ......................................... 3-6Driving In Flooded Area ................... 4-11Driving Tips ........................................ 4-7

Automatic transaxle ................... 5-17Break-in period ............................ 4-7Driving in flooded area .............. 4-11Hazardous driving ........................ 4-8Money-saving suggestions ........... 4-7Rocking the vehicle ...................... 4-9Winter driving .............................. 4-9

E

Emergency Starting ........................... 7-14Flooded engine ........................... 7-14Jump-starting .............................. 7-15Push-starting .............................. 7-18

Emergency Towing ........................... 7-19Emission Control System .................... 4-3Engine

Coolant ....................................... 8-21Exhaust gas .................................. 4-5Hood release .............................. 3-20Oil .............................................. 8-18Overheating ................................ 7-12Starting ......................................... 5-3

Engine Compartment Overview ........ 8-17Engine Coolant

Overheating ................................ 7-12

E

Engine Coolant TemperatureGauge ................................................ 5-31Exhaust Gas ........................................ 4-5Exterior Care ..................................... 8-61

F

FlasherHazard warning .......................... 5-55Headlights .................................. 5-46

Flat Tire ............................................... 7-3Changing ...................................... 7-6Spare tire and tool storage ............ 7-3

Flexible Floor Board ......................... 6-54Fluids

Classification .............................. 10-4Owner maintenance ................... 8-15

Fog Lights ......................................... 5-49Foot Brake .......................................... 5-4Front Seats .......................................... 2-2Fuel

Filler lid and cap ........................ 3-18Gauge ......................................... 5-31Requirements ............................... 4-2Tank capacity ............................. 10-5

Fuses ................................................. 8-52Panel description ........................ 8-55Replacement ............................... 8-52

G

Glove Box ......................................... 6-52

H

Hazard Warning Flasher .................... 5-55Hazardous Driving .............................. 4-8

Index

11-3


Form No.8U55-EA-05G

Black plate (370,1)

H

HeadlightsControl ....................................... 5-46Flashing ...................................... 5-48High-low beam .......................... 5-48Leveling ..................................... 5-48On reminder ............................... 5-48

Hood Release .................................... 3-20Horn .................................................. 5-55

I

IgnitionKeys ............................................. 3-2Switch .......................................... 5-2

Illuminated Entry System ................. 6-42Immobilizer System .......................... 3-23Indicator Lights ................................. 5-33

Cruise main ................................ 5-43Cruise set .................................... 5-43Headlight high-beam .................. 5-42Power steering malfunction ........ 5-43Security ...................................... 5-42Shift position .............................. 5-42Turn-signal/hazard warning ....... 5-44

Information Display .......................... 6-45Ambient temperature display ..... 6-46Audio display ............................. 6-47Climate control display .............. 6-47Clock .......................................... 6-46Information display functions .... 6-45Trip computer ............................. 6-47

Inside Trunk Release Lever ............... 3-15Instrument Cluster ............................. 5-28Instrument Cluster Dimmer SelectButton ............................................... 5-32Interior Care ...................................... 8-64Interior Lights ................................... 6-42

J

Jump-Starting .................................... 7-15

K

Keyless Entry System ......................... 3-3Keys .................................................... 3-2

L

Label Information ............................. 10-2Lane-Change Signals ........................ 5-49Liftgate ................................................ 3-9

Luggage compartment ................ 3-11Light Bulbs

Replacement ............................... 8-42Specifications ............................. 10-6

Lighter ............................................... 6-50Lighting Control ............................... 5-46Lubricant Quality .............................. 10-4Luggage Compartment Light ............ 6-44

M

MaintenanceIntroduction .................................. 8-2Owner maintenanceprecautions ................................. 8-16Owner maintenance schedule ..... 8-15Scheduled ..................................... 8-3

Manual Transaxle Operation ............... 5-9Recommendations for shifting ..... 5-9

Map Lights ........................................ 6-43Mirrors

Outside mirrors .......................... 3-28Rearview mirror ......................... 3-30

Money-Saving Suggestions ................ 4-7Moonroof .......................................... 3-21

11-4

Index


Form No.8U55-EA-05G

Black plate (371,1)

O

Odometer and Trip Meter .................. 5-29Outside Mirrors ................................. 3-28Overhead Lights ................................ 6-43Overheating ....................................... 7-12Overloading ...................................... 4-12

P

Paint Damage .................................... 8-59Parking Brake ..................................... 5-5Parking in an Emergency .................... 7-2Power Door Locks .............................. 3-8Power Steering .................................. 5-17

Fluid ........................................... 8-24Power steering malfunction indicatorlight ............................................ 5-17

Power Windows ................................ 3-16Push-Starting ..................................... 7-18

R

Rear Door Child Safety Locks ............ 3-9Rear Seat ............................................. 2-5Rear Window Defroster .................... 5-54Rear Window Washer ....................... 5-53Rear Window Wiper .......................... 5-53Rearview Mirror ................................ 3-30Recreational Towing ......................... 7-22Registering Your Vehicle in A ForeignCountry ............................................. 9-15Rocking the Vehicle ............................ 4-9

S

Safety Defects, Reporting ................. 9-41

S

Seat Belt SystemAutomatic locking ...................... 2-11Belt minder ................................. 2-20Center-rear position .................... 2-16Emergency locking .................... 2-11Except center-rear position ......... 2-12Extender ..................................... 2-18Pregnant women ........................ 2-10Pretensioner and load limiting .... 2-14Seat belt precautions .................... 2-9Warning light/beep ..................... 2-19

SeatsFront seat ...................................... 2-2Rear seat ....................................... 2-5

Security SystemImmobilizer system .................... 3-23Theft-deterrent system ............... 3-26

Service Publications .......................... 9-43Spare Tire and Tool Storage ................ 7-3Specifications .................................... 10-4Speedometer ...................................... 5-29SRS Air Bags

How the Air Bags Work ............. 2-45Supplemental restraint systemsprecautions ................................. 2-38

Starting the Engine .............................. 5-3Steering Wheel .................................. 3-28

Horn ........................................... 5-55Storage Compartments ...................... 6-52

Cargo securing loops .................. 6-53Cargo sub-compartment ............. 6-53Center console ............................ 6-53Flexible Floor Board .................. 6-54Glove box ................................... 6-52

Sunshade ........................................... 3-22Sunvisors .......................................... 6-42

Index

11-5


Form No.8U55-EA-05G

Black plate (372,1)

T

Tachometer ........................................ 5-31Temporary Spare Tire ....................... 8-40Theft-Deterrent System ..................... 3-26Tiedown

Hook .......................................... 7-20Tire Information ................................ 9-21Tire Pressure Monitoring System ...... 5-22

System error activation .............. 5-25Tire pressure monitoring systemwarning light .............................. 5-23Tires and wheels ......................... 5-25

TiresInflation pressure ........................ 8-37Replacement ............................... 8-39Rotation ...................................... 8-38Snow tires .................................. 4-10Spare tire and tool storage ............ 7-3Specifications ............................. 10-7Flat Tire ........................................ 7-3Tire chains .................................. 4-10Uniform tire quality grading system(UTQGS) ................................... 9-19

Tool ..................................................... 7-3Towing

Description ................................. 7-19Emergency towing ..................... 7-19Recreational towing ................... 7-22Trailer towing ............................. 4-13

Trailer Towing .................................. 4-13Trip Meter ......................................... 5-29Trunk Lid .......................................... 3-12Trunk Light ....................................... 3-14Turn and Lane-Change Signals ......... 5-49

V

Vanity Mirrors ................................... 6-42Vehicle Information Labels ............... 10-2

W

Warning Lights ................................. 5-33ABS ............................................ 5-35Air bag system ........................... 5-38Automatic transaxle ................... 5-40Brake system .............................. 5-35Charging system ......................... 5-36Check engine .............................. 5-37Door-ajar .................................... 5-39Engine oil pressure ..................... 5-37Front seat belt pretensionersystem ........................................ 5-38Low fuel ..................................... 5-38Low washer fluid level ............... 5-40Seat belt ...................................... 5-38Tire pressure monitoringsystem ........................................ 5-40

Warranty ............................................ 9-12Washer Fluid ..................................... 8-27Weights ............................................. 10-5Wheel Replacement .......................... 8-40Windows

Power windows .......................... 3-16Windshield Washer ........................... 5-52Windshield Wipers ............................ 5-50

Blades replacement .................... 8-30Winter Driving .................................... 4-9

11-6

Index


Form No.8U55-EA-05G

2006 Mazda3 Owners Manual - Mazda USA

Documents

Transcript of 2006 Mazda3 Owners Manual - Mazda USA