**2005 PRICE A4 singles AG - Luckins Live

TRADE PRICE LISTTRADE PRICE LISTTRADE PRICE LISTTRADE PRICE LISTJUJULLY 2009Y 2009JULY 2009

4 fire alarm control panels and ancillaries

4voice alarm systems

4BS5839-6 hush buttons

4automatic extinguisher panels

4disabled refuge systems

4EN54-4 power supplies

4disabled persons toilet alarms

4 call systems

4 induction loop amplifiers

4 infrared staffprotection systems

YouYou’’re safe with C-TECre safe with C-TECYou’re safe with C-TEC

www.c-tec.co.uk01942 322744 01942 829867 [email protected] 2

When it comes to cost-effective, expertly designed and reliable electronic equipment -you're safe with C-TEC.All of our life safety products are manufactured using state-of-the-art production techniques, helping us to guaranteeexcellent product quality and equipment that is consistently fit for its intended purpose. Indeed, C-TEC is the only UK firepanel manufacturer to have third-party product certifications and factory process approvals from the LPCB (LossPrevention Certification Board), BSI (British Standards Institute) and VdS.

Established in 1981 and currently trading in over 60 countries worldwide, our commitment to quality is underlined by ourISO 9001 accreditation (held since 1994) and our corporate membership of the FIA (Fire Industry Association).

Reliability and durability are built into our products at all stages - from conception and design at our dedicated R&D facilityto construction, testing and despatch at our purpose-built manufacturing headquarters in the North West of England.

The fact many of our products are third-party certificated by internationally recognised test and approval bodies such asthe LPCB, BSI and VdS confirms to specifiers, installers and consumers alike that they meet the design and performancerequirements of key British, European and international standards.

But it’s not just our products that set us apart from the competition, it’s our service too. The level of support offered byour knowledgeable sales and technical staff is second to none with comprehensive, practical advice readily available viaphone, fax or email.

Whatever your enquiry, we'll do our best to help, as quickly and efficiently as possible.

[email protected] 322744 01942 829867

This price list applies to all UK orders placed for delivery on or after 1st July 2009 and supersedes all previous C-TEC price lists.

Prices shown are our current UK trade prices in pounds (£) Sterling. Trade discounts may apply according to the followingdiscount classes/order codes (contact our sales desk for details):

n XFP n CFP n FF n BF n EVC n AVAC n NC n QT

Standard carriage is free on orders over £300.00 nett goods. Standard carriage on orders less than £300.00 nett goods willbe charged at £8.50 (UK mainland only). Carriage charges for other areas are available on request.

An on-site delivery service is available at no extra cost. However, the nature of on-site deliveries (lack of access, etc.),means that goods often have to be signed for by someone other than your selected representative. Once a signature hasbeen obtained, neither ourselves or our carrier can be held responsible for the goods. Although we will endeavour toprovide proof of delivery wherever possible, no compensation can be claimed for any consequential loss.

An inspection and restocking charge of 30% will be made on returns (minimum £5.00 per consignment).

Minimum invoice value = £20.00 + VAT. VAT is charged extra at the current rate.

All goods supplied and services provided are subject to our standard Conditions of Sale, as detailed on our AccountApplication Form (Document No. DSU2020201), copies of which are available on request. Copies of our Customer ReturnsPolicy (Document No. DQW1000101) are also available on request.

Errors and omissions excepted. Every effort has been made to ensure the accuracy of this price list but no responsibilitycan be accepted by C-TEC for any mistakes. Prices are subject to change without prior notice.

Our UK Sales Desk is open 8.30am to 5.00pm Monday to Friday, except for bank holidays, during our annual stocktake(normally the first two working days in May) and over our Christmas shutdown period.

Orders can be placed by telephone, fax or email using the details shown below.

www.c-tec.co.uk01942 322744 01942 829867 [email protected]

NEW PRODUCTS OVERVIEW........................................................................................................................................ 4

CONVENTIONAL FIRE ALARM EQUIPMENTCFP LPCB Approved 2-8 Zone Conventional Fire Panels (to EN54-2/4) .......................................................................... 5CFP Economy 2-8 Zone Conventional Fire Panels (to EN54-2/4) .................................................................................... 5CFP Standard 2-8 Zone Conventional Fire Panels (to EN54-2/4)...................................................................................... 5EFP Single Zone Conventional Fire Panels (to BS5839-4) ................................................................................................ 6FP 2-14 Zone Conventional Fire Panels (to BS5839-4) ...................................................................................................... 6MFP 4-28 Zone Conventional Fire Panels (to BS5839-4) .................................................................................................. 6EP Range 3 Zone Automatic Extinguisher Panel (to EN12094-1) .................................................................................... 7FP Automatic Extinguisher Panels .................................................................................................................................... 7Fire Alarm Ancillaries (remote indicators, relays, device isolators and sounder circuit extenders) .............................. 8EN54-4 Power Supplies ...................................................................................................................................................... 8Non-EN54-4 Power Supplies .............................................................................................................................................. 8Manual Call Points .............................................................................................................................................................. 9Series 65 (Apollo) Conventional Smoke & Heat Detectors .............................................................................................. 9Orbis (Apollo) Conventional Smoke & Heat Detectors .................................................................................................... 9Series H (Hochiki) Conventional Smoke & Heat Detectors ............................................................................................ 10Beam Detectors ................................................................................................................................................................ 10Bells.................................................................................................................................................................................... 10 Sirens.................................................................................................................................................................................. 10Bedhead Sounders ............................................................................................................................................................ 10 Base Sounders ....................................................................................................................................................................10Strobes / Beacons .............................................................................................................................................................. 11Sounder Strobe Combinations ........................................................................................................................................ 11Electromagnetic Door Retainers ...................................................................................................................................... 11Vibrating Pads .................................................................................................................................................................. 1124V VRLA Battery Packs .................................................................................................................................................. 11

2-WIRE FIRE ALARM EQUIPMENTCFP AlarmSense 2-8 Zone Two-Wire Fire Panels (to EN54-2/4) & Ancillaries................................................................ 12

ANALOGUE ADDRESSABLE FIRE ALARM EQUIPMENTXFP 1-2 Loop Networkable Analogue Addressable Fire Panels (to EN54-2/4) ............................................................ 13AFP 1-2 Loop Analogue Addressable Fire Panels (to EN54-2/4) .................................................................................... 14BS5839-6 Hush Buttons .................................................................................................................................................... 14XP95 Analogue Addressable Peripherals .................................................................................................................. 15/16Discovery Analogue Addressable Peripherals ................................................................................................................ 16C-TEC manufactured Analogue Addressable Peripherals ............................................................................................ 16Hochiki ESP Analogue Addressable Peripherals ............................................................................................................ 17

VOICE ALARM SYSTEMSAVAC Voice Alarm System................................................................................................................................................ 18PA/VA Systems .................................................................................................................................................................. 18

DISABLED REFUGE / EMERGENCY VOICE COMMUNICATION EQUIPMENTSigTEL Emergency Voice Communication System (to BS5839-9) .................................................................................. 19

DISABLED PERSONS TOILET ALARMSNC951 Disabled Persons Toilet Alarm Kits ...................................................................................................................... 20

800 SERIES CONVENTIONAL CALL SYSTEM800 Series Conventional Call System .................................................................................................................... 20/21/22800 Series Stainless Steel Call System .............................................................................................................................. 23

ADDRESSABLE CALL SYSTEMS / INFRARED STAFF PROTECTION SYSTEMSQuantec Addressable Call System ........................................................................................................................ 24/25/26

INDUCTION LOOP EQUIPMENTPDA Range Induction Loop Equipment and Ancillaries............................................................................................ 27/28

INFRARED ASSISTIVE LISTENING SYSTEMSInfrared Assistive Listening Systems ................................................................................................................................ 29

DIMENSIONSKey control panel measurements / mounting details ................................................................................................30/31

CONTENTS

page 3

NEW


LPCB APPROVED AUTOMATIC EXTINGUISHER PANEL

• Our EP203 automatic extinguisher panel is now approved to EN12094-1 and EN 54-2/4 by the Loss Prevention Certification Board

• The panel features a large graphic display for ease of programming and a host of monitored inputs & outputs - see page 7 for details

ANTI-TAMPER ENCLOSURES FOR SigTEL ECU-8 CONTROLLERS

• Two anti-tamper enclosures are now available for our SigTEL disabled refuge system.

• The BF359/3 brushed stainless steel enclosure (left) and the BF359/2 grey steel enclosure are specifically designed for housing ECU-8 controllers in areas that are accessible to the general public - see page 19 for details.

STAINLESS STEEL QUANTEC DEVICES

• Our Quantec addressable call system now includes a range of robust and attractively finished stainless steel devices, specifically designed for use in mental health/hospital type environments

• The range includes two displays, an addressable overdoor light and three different types of call point - see pages 24 and 25 for details.

INFRARED NECK PENDANTS FOR QUANTEC

• Our QT432 infrared neck pendant is specifically designed to allow patients to trigger calls remotely via a Quantec infrared call point or ceiling receiver.

• Trading at just £40.00, the pendant is robust, easy to use and available for purchase mid to late Summer 2009 - see page 25 for details.

VdS CERTIFIED EN54-4/A2 COMPLIANT POWER SUPPLY UNITS

• Our entire range of EN54-4 power supplies are now third-party certified to EN54-4/A2:2006 by the VdS or LPCB.

• Five versions are available, two in a plastic enclosure rated at 12V 2A and 24V 1.5A and three in a metal enclosure rated at 1.5A, 3A and 5A - see page 8 for details.

• All models are continuously rated and have a single pole volt-free fault relay.

NEW PRODUCTSFrom LPCB approved automatic extinguisher panels and VdS certified EN54 power supplies to

infrared neck pendants and stainless steel call points for our Quantec addressable call system,

this year’s price list includes a host of new products. For up-to-the-minute information on all

of C-TEC’s latest product releases be sure to visit our website at www.c-tec.co.uk

LPCB Ref. 176c

CONVENTIONAL FIRE ALARM EQUIPMENT

www.c-tec.co.uk01942 322744 01942 829867 [email protected] page 5

• Fully compliant with EN54-2/4

• LPCB approved, standard and economy versions available

• Attractive flush or surface mountable plastic lid and enclosure - no bezel required!

• Code and key entry variants

• Four conventional sounder circuits

• Class change and alert inputs

• Auxiliary fault, reset, remote and aux. fire outputs

• Wide range of engineering functions including zone test, non-latching zones, programmable delays and coincidence (dependent on model purchased)

• Ancillary connections for up to eight two-wire repeaters per system and optional CFP relay boards

• See page 12 for information on our AlarmSense two-wire CFP panels.

CFP702-4 CFP Standard 2 zone panel, code entry (Max. 2 x 3.4Ah batteries) £118.45 n

CFP702-4K CFP Standard 2 zone panel, key entry (Max. 2 x 3.4Ah batteries) £139.05 n





CFP760 CFP 8 zone repeater panel, code entry (Max. 2 x 3.4Ah batteries)Max 8 repeaters per system £172.24 n

CFP760K CFP 8 zone repeater panel, key entry (Max. 2 x 3.4Ah batteries)Max 8 repeaters per system £180.88 n

CFP761 CFP/XFP network driver card, one required per repeater system, fit at main £60.34 n

CFP762 CFP relay output card, provides reset, fault, aux & remote relay outputs £40.99 n

CFP763 CFP relay output card, 12 relays, as CFP762 plus 8 o/p per zone relays £63.19 n

CFP764 CFP relay output card, 8 relays (8 o/p per zone relays for an 8 zone CFP) £42.12 n

CFP765 CFP relay output card, 4 relays (4 o/p per zone relays for a 4 zone CFP) £37.12 n


BF362 Barrier interface unit (allows a CFP zone circuit to be connected to up to 10 £15.38 nintrinsically safe detectors and call points via a Zener barrier, not supplied)

CFP STANDARD 2-8 ZONE CONVENTIONAL FIRE PANELS (TO EN54-2/4)

Include all CFP standard features except coincidence, zone delay and non-latching zone facilities.CFP Economy panels are not compatible with CFP repeaters or CFP relay boards.

CFP702E-4 CFP Economy 2 zone panel, code entry (Max. 2 x 3.4Ah batteries) £105.00 n

CFP702E-4K CFP Economy 2 zone panel, key entry (Max. 2 x 3.4Ah batteries) £110.00 n





CFP ECONOMY 2-8 ZONE CONVENTIONAL FIRE PANELS (TO EN54-2/4)

CFP LPCB APPROVED 2-8 ZONE CONVENTIONAL FIRE PANELS (TO EN54-2/4)

Include all CFP standard features except coincidence and non-latching zone facilities.

CFP702-4/LPC CFP LPCB approved 2 zone panel, code entry £154.06 nLPCB certified to EN54-2/4. (Max. 2 x 3.4Ah batteries)



CFP ALARMSENSE 2-8 ZONE TWO WIRE CONVENTIONAL FIRE PANELS (TO EN54-2/4)

Include all standard CFP features. Zone circuits designed for use with AlarmSense call points, AlarmSensedetectors & AlarmSense sounders only. See our separate listing on page 12

CFP 2-8 ZONE EN54 FIRE PANELS

CFP STANDARD PANELS

CFP ECONOMY PANELS

CFP LPCB APPROVED PANELS

Zone delay facilit

y

Non-latc

hing

Coincid

ence

Zone test fa

cility

Faultdiagnostic

Ancillary

connections

for syste

mexpansio

n

4

7

4 4 4 4 4

7 7 7

7 7

4 4

4 4 4 4

zones fa

cility

(double-k

nock) facilit

y

facilit

ies

Which CFP?

This chart illustrates the different engineering functions available on the CFP range of fire panels



• Fully compliant with BS5839-4

• Lift-off lid for easy first fix and straightforward maintenance

• Robust metal enclosure with heavy duty base connections

• Optional head removal facility (fitted as standard to MFP panels)

• Non-latching “class change” input

• Latching fire and non-latching fault outputs (via expansion loom)

• Short circuit = fire facility (selectable on a zone by zone basis for retro-installations)

• Ancillary connections for repeater panels and other system add-ons including expansion looms, fault relays, sounder extender kits, etc

• Ideal for retro-installations

FF382-2 FP2 2 zone panel, does not extend (Max. 2 x 2.3Ah batteries) £137.48 n

FF384-3 FP4E 4 zone economy panel, does not extend (Max. 2 x 2.3Ah batteries) £162.16 n

FF384-2 FP4 4 zone panel, extendable to 6 zones (Max. 2 x 3.4Ah batteries) £210.45 n


FF388-3 FP8E 8 zone economy panel, does not extend (Max. 2 x 3.4Ah batteries) £282.98 n





FF387Z-2 FP 2 zone extender pcb kit, use to extend FP panels £36.27 n

BF378M MINIMU miniature EOL module (for head out monitoring on EFP/FP) £8.44 n

BF378 Electronic Monitoring Unit (for head out monitoring on EFP/FP) £15.38 n

FF374FR FP fault relay module £34.72 n

FF374DFR FP fire relay module £34.72 n

FF374DT FP sounder delay module £34.72 n

FF374X FPX expansion loom and terminals for use with FP 2-14 zone panels £11.54 n

BF362 Barrier interface unit (allows an FP zone circuit to be connected to up to 10 £15.38 nintrinsically safe detectors and call points via a Zener barrier, not supplied)

FF396-2 FP 10 zone repeater panel (no batteries required) £131.31 n

FF398-2 FP 20 zone repeater panel (no batteries required) £197.00 n

FF379 Bezel for FP2/FP4E £26.37 n

FF385 Bezel for FP4 / FP6 / FP8E / FP Repeaters £28.99 n

FF387 Bezel for FP8 / FP10 / FP12 / FP14 £34.78 n

FP 2-14 ZONE CONVENTIONAL FIRE PANELS (TO BS5839-4)

FF504 MFP 4 zone microprocessor panel, extendable to 12 zones (Max. 2 x 3.4Ah batteries) £242.74 n


FF512 MFP 12 zone microprocessor panel, does not extend (Max. 2 x 3.4Ah batteries) £457.63 n




FF528 MFP 28 zone microprocessor panel, does not extend (Max. 2 x 7.0Ah batteries) £987.49 n

FF501Z MFP 4 zone extender pcb kit, use to extend MFP panels £107.44 n

FF574X MFPX expansion loom and terminals £11.54 n

FF596 MFP 8 zone repeater panel, extendable to 28 zones (no batteries required) £194.45 n

FF596R MFP 8 zone repeater extender kit, use to extend MFP repeaters £43.63 n

FF596T Repeater transmitter pcb kit, one required per repeater system £174.78 n

BF362 Barrier interface unit (allows an MFP zone circuit to be connected to up to 10 £15.38 nintrinsically safe detectors and call points via a Zener barrier, not supplied)

FF385 Bezel for MFP4 / MFP8 / MFP12 / MFP Repeaters £28.99 n

FF387 Bezel for MFP16 / MFP20 / MFP24 / MFP28 £34.78 n

MFP 4-28 ZONE CONVENTIONAL FIRE PANELS (TO BS5839-4)

FP/MFP 1-28 ZONE BS FIRE PANELS

EFP panels are not compatible with FP repeaters or FP relay modules.

FF380-2 EFP1 single zone panel, does not extend (Max. 2 x 2.3Ah batteries) £89.70 n

FF380X EFPX expansion loom and terminals for EFP1 £2.85 n

BF378M MINIMU miniature EOL module (for head out monitoring on EFP1) £8.44 n

BF378 Electronic Monitoring Unit (for head out monitoring on EFP1) £15.38 n

EFP SINGLE ZONE CONVENTIONAL FIRE PANELS (TO BS5839-4)



EP203 3 zone automatic extinguisher panel c/w 3A EN54-4 PSU (Max. 2 x 7.0Ah batteries) £430.00 nLPCB certified to EN12094-1 and EN54-2/4

EP212 Output expansion relay board for EP203 £95.00 nProvides volt-free changeover relay contacts for reset, mode, discharged, hold and abort

EP210F Remote status unit , flush mounting, fully-functional £135.00 nc/w Status LCD, manual release & mode (auto/manual) switches Max. 8 x EP210F or EP210S per EP203

EP210S Remote status unit, surface mounting, fully-functional £140.00 nc/w Status LCD, manual release & mode (auto/manual) switches Max. 8 x EP210S or EP210F per EP203

BF359/1 Weatherproof enclosure, IP66, steel, non-locking (for EP210F/S) £110.00 n

EP211 Economy status unit, single gang £83.00 nc/w keyswitch operated mode (auto/manual) switch and Status LEDsMax. 8 per EP203

EP214 System line terminator, max. 2 per system (note, one is supplied with the EP203) £27.12 nFor terminating the EP203’s extinguishant release output to a gas release solenoid

EP215 Extinguishant hold/abort button, single gang, IP66 rated £65.00 nCan be used to delay or cancel the release sequence depending on how it is connected

BF372 Yellow extinguishant release call point, surface mounting £17.37 n

EP RANGE AUTOMATIC EXTINGUISHER PANEL (TO EN12094-1)

EP 3 ZONE AUTOMATIC EXTINGUISHER PANELS

FF383H-2 FP auto extinguisher panel (contact our Sales Desk for a list of features) £358.97 n

FF384H FP auto extinguisher panel c/w FF372/E Multi-purpose Environmental Board £418.25 n

FF372/E Multi-Purpose Environmental Board ONLY £62.16 n

FF372/W Water sensing board ONLY (for use with FF372/E) £33.35 n

FF372/M Mains current sensing board ONLY (for use with FF372/E) £56.50 n

FP AUTOMATIC EXTINGUISHER PANELS

FP AUTOMATIC EXTINGUISHER PANELS

• A three-zone automatic extinguisher panel for areas housing expensive, dangerous or irreplaceable items of equipment

• LPCB approved to EN 12094-1 and EN54-2/4

• Functions as a standard three zone fire panel with extra circuitry for controlling the release of fire-suppressing gas into computer rooms, chemical plants, etc.

• 128 x 64 pixel graphical display for straightforward system programming

• Any combination of activated zones can be programmed to automatically start the panel’s release sequence

• Three conventional sounder circuits, (two x 1st stage, one x 2nd stage)

• Wide range of monitored inputs and auxiliary outputs (see schematic)

• Time-stamped event log

• Connections for up to eight remote status units with their own LCDs, manual release and mode switches

• Connections for up to eight economy status units also provided

• Optional relay expansion boards and single gang abort and hold buttons available

An overview of the EP203’s Inputs & Outputs

EXTINGUISHER RELEASEPULL DOWN and PUSH BUTTONS

Extinguisher Control Panel Instructions

Exti

ng

uis

han

tG

as




Remote Status Units(Max. 8)

Economy Status Units(Max. 8)

Input Switches

RelayBoard

DetectionZones

SounderCircuits

Fire

Local Fire

1st stage active

2nd stage active

Fault

1st

stag

e

1st

stag

e

2nd

stag

e

1 2 3

Mo

de/

ESU

Ho

ld

Ab

ort

Rel

ease

RS4

85

Gas low pressure switch

Gas flow detection switch

Activate extinguisher solenoid

Extract fan switch

Relay Outputs

Provides reset, mode, discharged, hold and abort outputs


FIRE ALARM ANCILLARIES

BF318 Remote LED indicator, supplied on a single gang plate £5.68 nIdeal for connecting to hidden or out of sight detectors or directly to a sounder circuit

BF376 24V 5A relay on a plate, supplied on a single gang plate £17.18 nIdeal for operating door retaining magnets, rollershutter doors & other ancillary devices

BF367 Auxiliary device isolator, supplied on a single gang plate c/w buzzer £23.74 nAllows a 24V d.c. output from a fire panel to be remotely isolated, ideal for preventingautodiallers, rollershutter doors, etc., from accidentally triggering during routine maintenance

BF366 24V 5A isolatable relay on a plate, supplied on a single gang plate £35.00 nCombines the functions of the BF376 5A relay and BF367 device isolator in one unit

FF502P Four zone monitored sounder extender, supplied on a double gang plate £41.55 nProvides four extra sounder circuits with open and closed circuit fault monitoring, two trigger inputs and one fault output

REMOTE INDICATORS, RELAYS, DEVICE ISOLATORS, SOUNDER EXTENDERS, ETC.

BF375P 24V 250mA unregulated door release PSU, supplied on a double gang plate £41.33 n

BF375PK 24V 250mA unregulated door release PSU kit £82.00 nIncludes one BF375P and one BF345/1H electromagnetic door retainer

BF375M 24V 1A regulated general purpose boxed PSU (271 x 200 x 70mm enclosure) £77.96 nMax. 2 x 2.3 Ah batteries.

BF377 24V 2A unregulated door release boxed PSU (405 x 267 x 92mm enclosure) £66.21 n

BF368EN 24 3A regulated boxed PSU (410 x 250 x 80mm enclosure). Max. 2 x 7.0Ah batts. £175.00 n

BF361-3 24V 3A Boxed PSU (465 x 290 x 103mm enclosure). Max. 2 x 7.0Ah batteries. £160.00 n

BF361-5 24V 5A Boxed PSU (465 x 290 x 103mm enclosure). Max. 2 x 7.0Ah batteries. £200.00 n

BF375PE 24V 250mA unregulated double gang door release psu c/w detector circuit £46.35 n

BF375PEK 24V 250mA double gang automatic door release system £186.15 nIncludes 1 x BF375PE double gang door release psu c/w detector circuit, 2 x Apollo optical detectors /bases; 1 x door retainer; 1 x NCP-10 flush back box

NON-EN54 24V POWER SUPPLIES & ANCILLARIES

• A range of durable and cost-effective fire alarm ancillaries, suitable for use with virtually all makes of fire alarm panel. The range includes:-

• The BF318 remote LED indicator

• The BF376 24V 5A relay on a plate

• The BF367 auxiliary device isolator

• The BF366 isolatable 24V 5A relay on a plate

• The FF502P four zone sounder extender

• A range of ancillary fire alarm equipment boxes for housing batteries, timers, etc

BF360BOX Ancillary fire alarm equipment box (external size 380x235x90mm) £41.59 n



BF360LEDKIT 6-way Status LED kit for BF360BOX £15.25 n

BF361LEDKIT 6-way Status LED kit for BF361BOX or BF362BOX £15.25 n

NCP-8 White 35mm flush mount UK single gang back box £1.81 n

NCP-9 White 25mm surface mount UK single gang back box £1.47 n

NCP-10 White 35mm flush mount UK double gang back box £2.56 n

NCP-11 White 25mm surface mount UK double gang back box £2.65 n

GENERAL PURPOSE BOXES

• Third-party certified to EN54-4/A2:2006by the VdS or LPCB (as indicated)

• All models are continuously rated, offer low current consumption, a single pole volt-free fault relay and link-selectable battery charging capacity

BF360-12 12V 2A EN54-4 Boxed PSU (380 x 235 x 96mm plastic enclosure) £138.08 nMax. 1 x 7.0Ah battery or 1 x 3.4Ah if STU plate fitted. VDS certified to EN54-4/A2

BF360SP Optional STU mounting plate for BF360-12 2A PSU £14.28 n

BF360-24 24V 1.5A EN54-4 Boxed PSU (380 x 235 x 96mm plastic enclosure) £150.00 nMax. 2 x 3.4Ah batteries. VDS certified to EN54-4/A2

BF362-1 24V 1.5A EN54-4 Boxed PSU (404 x 404 x 110mm metal enclosure) £170.00 nMax. 2 x 17.0Ah batteries. VDS certified to EN54-4/A2 (due Aug 09)

BF362-3 24V 3A EN54-4 Boxed PSU (404 x 404 x 110mm metal enclosure) £180.00 nMax. 2 x 12.0Ah batteries. LPCB certified to EN54-4/A2 (due Aug 09)

BF362-5 24V 5A EN54-4 Boxed PSU (404 x 404 x 110mm metal enclosure) £220.00 nMax. 2 x 17.0Ah batteries. VDS certified to EN54-4/A2 (due Aug 09)

BF360-12/C 12V 2A EN54-4 Power Supply PCB Only £65.00 n

BF360-24/C 24V 1.5A EN54-4 Power Supply PCB Only £81.00 n



EN54-4/A2 12V & 24V POWER SUPPLIES & ANCILLARIES (TO EN54-4:1997/A2:2006)

EN54-4/A2 POWER SUPPLIES

NEW


BF365SC Sounder isolator controller, supplied on a double gang plate £105.00 nBSI certified to EN54 parts 17 & 18 when used in conjunction with BF365IM modules

BF365IM Sounder isolator module (max. 35 per BF365SC) £20.34 nBSI certified to EN54 parts 17 & 18 when used in conjunction with the BF365SC

CONVENTIONAL SOUNDER ISOLATOR SYSTEM

NON-EN54-4 POWER SUPPLIES



BF302Z1H 55000-122 Series 65 AIR (57oC) heat detector, no base £13.50 n

BF302Z2H 55000-127 Series 65 BR (75oC) heat detector, no base £13.50 n

BF303Z1H 55000-132 Series 65 CR (90oC) heat detector, no base £13.50 n

BF303Z2H 55000-137 Series 65 CS (90oC) heat detector, no base £13.50 n

BF316ZH 55000-317 Series 65 optical smoke detector, no base £28.00 n

BF317ZH 55000-217 Series 65 ionisation smoke detector, no base £28.00 n

BF317ZH1 55000-220 Series 65 integrating ionisation smoke detector, no base £30.00 n

BF314ZOH ORB-OH-13001 Orbis multi-sensor, requires BF308ZO base £37.00 n

BF308Z 45681-200 Series 65 base £5.47 n

BF308ZD 45681-201 Series 65 base with diode £6.42 n

BF308ZR 45681-245 Series 65 base with relay £17.10 n

BF308ZO ORB-MB-00001 Orbis timesaver base £5.50 n

SERIES 65 (APOLLO) CONVENTIONAL SMOKE & HEAT DETECTORS

BF370R ‘KAC’ surface mounting crack glass fire call point, 470Ω £6.46 n

BF370RF ‘KAC’ flush mounting crack glass fire call point, 470Ω £6.01 n

BF370/R ‘KAC’ IP55 Rainproof crack glass fire call point £37.77 n

BF370/W ‘KAC’ IP67 Waterproof crack glass fire call point £74.97 n

BF371 Spare glass for ‘KAC’ crack glass fire call points £0.54 n

BF370KRK Test key for ‘KAC’ crack glass fire call points £0.55 n

BF370FR ‘FUL’ surface mounting crack glass fire call point, 470Ω £7.85 n

BF370FFR ‘FUL’ flush mounting crack glass fire call point, 470Ω £6.83 n

BF371F/CX Spare glass for ‘FUL’ crack glass fire call point £0.50 n

BF370FRK/CX Test key for ‘FUL’ fire call points, pack of 10 £5.55 n

BF370FC Protective cover for ‘FUL’ fire call point £3.05 n

BF370MR ‘KAC’ No Break surface mounting fire call point, 470Ω £8.21 n

BF370MFR ‘KAC’ No Break flush mounting fire call point, 470Ω £7.50 n

BF370KRK Test key for ‘KAC’ No Break fire call points £0.55 n

BF370MC Protective cover for ‘KAC’ No Break fire call point £3.01 n

MANUAL CALL POINTS

FIRE ALARM ACCESSORIES

BF302ZO1H ORB-HT-11001 Orbis A1R heat detector, no base £15.50 n

BF302ZO2H ORB-HT-11002 Orbis A2S heat detector, no base £15.50 n

BF303ZO1H ORB-HT-11003 Orbis BR heat detector, no base £15.50 n

BF303ZO2H ORB-HT-11004 Orbis BS heat detector, no base £15.50 n

BF303ZO3H ORB-HT-11005 Orbis CR heat detector, no base £15.50 n

BF303ZO4H ORB-HT-11006 Orbis CS heat detector, no base £15.50 n

BF314ZOH ORB-OH-13001 Orbis multi-sensor, no base £37.00 n

BF316ZOH ORB-OP-12001 Orbis optical smoke detector, no base £34.00 n

BF308ZO ORB-MB-00001 Orbis timesaver base £5.50 n

BF308ZOD ORB-DB-00003 Orbis timesaver base with diode £6.50 n

BF308ZOR ORB-RB-10004 Orbis timesaver relay base £17.50 n

Orbis Intrinsically safe range

BF302Z1HIS ORB-HT-51145 Orbis grade 1 intrinsically safe heat detector, needs BF308ZIS base £60.00 n

BF302Z2HIS ORB-HT-51147 Orbis grade 2 intrinsically safe heat detector, needs BF308ZIS base £60.00 n

BF315ZHIS ORB-OH-53028 Orbis intrinsically safe multi-sensor, needs BF308ZIS base £78.87 n

BF316ZHIS ORB-OP-52027 Orbis intrinsically safe optical smoke detector, needs BF308ZIS base £63.15 n

BF308ZIS ORB-MB-50018 Orbis intrinsically safe timesaver base £10.00 n

ORBIS (APOLLO) CONVENTIONAL SMOKE & HEAT DETECTORS



BF336 24V polarised fire bell, internal £13.72 n

BF336C 24V polarised 6” fire bell £13.00 n

BF336/W 24V polarised fire bell, weatherproof £25.32 n

BELLS

BF330CSR 24V red VTG fire siren c/w shallow base £17.40 n

BF330CSR/LPCB 24V red VTG fire siren c/w shallow base (LPCB approved) £18.57 n

BF330CDR 24V red VTG fire siren c/w deep base £17.40 n

BF330CDR/LPCB 24V red VTG fire siren c/w deep base (LPCB approved) £18.85 n

BF330SR 24V red polarised fire siren, internal (shallow) £17.91 n

BF330DR 24V red polarised fire siren, weatherproof (deep) £19.46 n

SIRENS

BF331CR 24V red VRS conventional bedhead sounder £13.50 n

BF331CR/L 24V red VRS conventional bedhead sounder, with LED £37.50 n

BF331CW 24V white VRS conventional bedhead sounder £13.50 n

BF331CW/L 24V white VRS conventional bedhead sounder, with LED £37.50 n

BF331R 24V red polarised bedhead sounder £13.61 n

BF331W 24V white polarised bedhead sounder £13.61 n

BEDHEAD SOUNDERS

BF332C 24V white VCT conventional base sounder £17.40 n

BF332C/LIDW White lid for VCT sounder £2.14 n

BF332 24V Squashni base ceiling sounder £17.91 n

BASE SOUNDERS

BF369BD Fireray 2000 12-24V optical beam detector, 10-100m range £441.54 n

BF369HKIT1 SPB-ET Hochiki beam detector, installation kit and filter set £515.00 n

BF369HR SRA-ET Hochiki reflective beam detector c/w reflector, needs BF369HRB £321.00 n

BF369HRB SRA-ET (B/BOX) Hochiki back box for BF369HR £46.50 n

BEAM DETECTORS

BF302HH1 DFJ-AE/3 Hochiki 60º fixed temperature heat detector, no base £21.00 n

BF302HH2 DFJ-CE/3 Hochiki 90º fixed temperature heat detector, no base £21.00 n

BF303HH1 DCD-AE/3 Hochiki 60º combined heat & rate of rise detector, no base £21.00 n

BF303HH2 DCD-CE/3 Hochiki 90º combined heat & rate of rise detector, no base £21.00 n

BF316HH SLR-E3 S Hochiki optical smoke detector, no base £28.00 n

BF308H YBN-R/6 Hochiki standard detector base £4.00 n

BF308HD YBN-R/6SK Hochiki detector base with diode £5.66 n

BF308HR YBO-R/6R Hochiki detector base with latching relay £17.50 n

BF308HRS YBO-R/6RS Hochiki detector base with latching relay & schottky diode £19.16 n

BF308HRNL YBO-R/6RN Hochiki detector base with non-latching relay £31.81 n

AFP757 Removal tool £97.75 n

Hochiki Intrinsically safe rangeBF302HHIS DCD-IE(IS) intrinsically safe heat detector, needs BF308HHIS base £82.71 n

BF316HHIS SLR-E(IS) intrinsically safe optical smoke detector, needs BF308HHIS base £84.38 n

BF308HHIS YBN-R/4(IS) intrinsically safe base £6.00 n

BF370HIS CCP(IS) intrinsically safe manual call point £154.50 n

MTL5061 DC/DC galvanic isolator £330.00 n

MTL7787 Zener barrier £142.71 n

DX070 Enclosure for galvanic isolator/zener barrier £162.15 n

SERIES H (HOCHIKI) CONVENTIONAL SMOKE & HEAT DETECTORS



BC283/2 24V 1.2 AH VRLA battery pack (2 x 12V including link wire) £25.72 n




BC288/4 24V 10.0 AH VRLA battery pack (4 x 6V including link wires) £74.11 n

BC290/2 24V 17.0 AH VRLA battery pack (2 x 12V including link wires) £73.82 n

BC289/2 24V 24.0 AHr VRLA battery pack (2 x 12V including link wire) £130.11 n

24V BATTERY PACKS

BF363 24V vibrating pad c/w locking jack plug (requires 1 x BF364) £45.00 nDesigned for use under pillows, etc, to warn the hard of hearing of a fire condition

BF364 Single gang locking jack socket for use with BF363 £32.00 nCan be connected to a standard 24V (max. 27V) fire alarm sounder circuit

VIBRATING PADS

BF333CSR 24V red VTB fire siren/beacon c/w shallow base £41.34 n

BF333CDR 24V red VTB fire siren/beacon c/w deep base £41.34 n

BF333F 24V Flashni sounder/beacon combined £41.33 n

SOUNDER BEACON COMBINATIONS

BF345/1H ‘H’ Range 24V electromagnetic door retainer £31.00 n

BF345/2H ‘H’ Range 240V a.c. electromagnetic door retainer £32.35 n

BF345HB Floor mounting bracket for ‘H’ range door retainers £11.85 n

BF345C/24/200 ‘C’ Range 24V low profile door retainer, 200N, c/w keeper plate £30.42 n

BF345C/230/200 ‘C’ Range 230V a.c. low profile door retainer, 200N, c/w keeper plate £31.00 n

BF345C/24/500 ‘C’ Range 24V low profile door retainer, 500N, c/w keeper plate £84.14 n

BF345CB Floor mounting bracket for ’C’ range door retainers £7.14 n

BF345C/FM24/200 24V floor mounting door retainer, 200N, c/w keeper plate £63.22 n

BF345C/FM24/500 24V floor mounting door retainer, 500N, c/w keeper plate £89.08 n

ELECTRO-MAGNETIC DOOR RETAINERS

BF340/1 24V polarised red 1W fire strobe £24.82 n

BF340/3 24V polarised red 3W fire strobe £28.05 n

BF340C/1 24V 1W xenon beacon, red lens £20.85 n



BF340CLS 24V red LED beacon, shallow base £19.57 n

BF340CLD 24V red LED beacon, deep base £19.85 n

STROBES / BEACONS

2 WIRE FIRE ALARM EQUIPMENT


CFP/ALARMSENSE TWO-WIRE FIRE PANELS & ANCILLARIESCFP ALARMSENSE 2-8 ZONE TWO-WIRE FIRE PANELS (TO EN54-2/4)

Include all standard CFP features (see page 5). Zone circuits designed for use with AlarmSense call points, AlarmSense detectors & AlarmSense sounders only.

CFP702-2 CFP AlarmSense 2 zone two-wire panel, code entry £153.98 nincludes 2 AlarmSense zone circuits, does not extend (Max. 2 x 3.4Ah batteries)

CFP702-2K CFP AlarmSense 2 zone two-wire panel, key entry £174.59 nincludes 2 AlarmSense zone circuits, does not extend (Max. 2 x 3.4Ah batteries)





CFP760 CFP 8 zone repeater panel, up to 8 per system, code entry £172.24 n(Max. 2 x 3.4Ah batteries)

CFP760K CFP 8 zone repeater panel, up to 8 per system, key entry £180.88 n(Max. 2 x 3.4Ah batteries)

CFP761 CFP network driver card, one required per repeater system, fit at main £60.34 n

CFP762 CFP relay output card, provides reset, fault, aux & remote relay outputs £40.99 n

CFP763 CFP relay output per zone card, as CFP762 plus 8 output per zone relays £63.19 n

CFP764 CFP relay output card, 8 relays (8 o/p per zone relays for an 8 zone CFP) £42.12 n



BF302ASH 55000-190 AlarmSense standard heat detector £20.86 n

BF302ASHH 55000-193 AlarmSense high temperature heat detector £22.41 n

BF316ASH 55000-390 AlarmSense optical smoke detector £32.51 n

BF316ASHI 55000-391 AlarmSense integrating optical smoke detector £31.38 n

BF308AS 45681-244 AlarmSense base with removAlert £15.68 n

BF330ASBS 45681-510 AlarmSense base sounder (requires cap for stand-alone use) £35.81 n

BF330ASLIDR 45681-295 Red cap for base sounder £3.35 n

BF330ASLIDW 45681-294 White cap for base sounder £3.35 n

BF330ASBSB 45681-509 AlarmSense base sounder/beacon £39.07 n

BF318AS 53832-070 AlarmSense remote indicator £10.61 n

BF310ASR 55000-835 AlarmSense relay module (needs mounting box) £32.50 n

BF370ASS 55100-894 AlarmSense surface mounting manual call point £32.68 n

BF316ASHC 55000-392 AlarmSense optical smoke detector and £65.51 nsounder base combination

BF316ASHIC 55000-393 AlarmSense integrating optical smoke detector £66.20 nand sounder base combination

BF302ASHC 55000-196 AlarmSense standard heat detector and £62.41 nsounder base combination

BF302ASHHC 55000-197 AlarmSense high temperature heat detector and £63.79 nsounder base combination

BF316ASHC1 55000-394 AlarmSense optical smoke detector and £81.88 nsounder beacon base combination

BF316ASHIC1 55000-395 AlarmSense integrating optical smoke detector and £82.75 nsounder beacon base combination

BF302ASHC1 55000-198 AlarmSense standard heat detector and £78.01 nsounder beacon base combination

BF302ASHHC1 55000-199 AlarmSense high temperature heat detector £79.73 nand sounder beacon base combination

ALARMSENSE DETECTORS, CALL POINTS & SOUNDERS for use with CFP two-wire fire panels only

Designed to work with widely available, open protocol analogue firealarm systems, C-TEC’s latest innovation gives fire alarm installers aunique opportunity to enter the rapidly expanding HMO marketplaceby utilising both conventional and analogue addressable fire alarmtechnology - see page 14 for further details.

HEARD ABOUT OUR NEW BS5839-6 HUSH BUTTONSOLUTION FOR HOUSES OF MULTIPLE OCCUPATION?

• Designed to comply with EN54-2/4

• Available with 2, 4 or 8 AlarmSense zone circuits

• AlarmSense detectors, call points, sounders and beacons can be connected to the same pair of supply wires, providing considerable cost savings on installation

• Four conventional sounder circuits also provided

• Class change and alert inputs

• Auxiliary fault, reset, remote and aux. fire outputs

• Code and key entry variants

• Wide range of engineering functions including zone test, non-latching zones, programmable delays and coincidence

• Ancillary connections for up to eight two-wire repeaters per system and optional CFP relay boards

• General and local alarm facility on AlarmSense sounders and beacons ideal for use in houses of multiple occupation

ANALOGUE ADDRESSABLE FIRE ALARM EQUIPMENT


XFP501E/X XFP Networkable single loop 16 zone panel £360.00 nXP95/Discovery version, code entry, c/w 1.4A psu, plastic enclosureLPCB certified to EN54-2/4. (Max. 2 x 3.4Ah batteries)

XFP501EK/X XFP Networkable single loop 16 zone panel £370.00 nXP95/Discovery version, key entry, c/w 1.4A psu, plastic enclosureLPCB certified to EN54-2/4. (Max. 2 x 3.4Ah batteries)

XFP501/X XFP Networkable one loop 32 zone panel £526.50 nXP95/Discovery version, code entry, c/w 3A psu, metal enclosureLPCB certified to EN54-2/4. (Max. 2 x 7.0Ah batteries)

XFP501K/X XFP Networkable one loop 32 zone panel £536.50 nXP95/Discovery version, key entry, c/w 3A psu, metal enclosureLPCB certified to EN54-2/4. (Max. 2 x 7.0Ah batteries)

XFP502/X XFP Networkable two loop 32 zone panel £661.50 nXP95/Discovery version, code entry, c/w 3A psu, metal enclosureLPCB certified to EN54-2/4. (Max. 2 x 7.0Ah batteries)

XFP502K/X XFP Networkable two loop 32 zone panel £671.50 nXP95/Discovery version, key entry, c/w 3A psu, metal enclosureLPCB certified to EN54-2/4. (Max. 2 x 7.0Ah batteries)

For bezels and stainless steel enclosures see XFP ancillaries section below

XFP 1-2 LOOP NETWORKABLE ANALOGUE ADDRESSABLE FIRE PANELS (TO EN54-2/4)

• All models third-party approved toEN54 parts 2 & 4 by the LPCB

• Compatible with Hochiki’s ESP & Apollo’sXP95 & Discovery protocols

• Can be configured to sit on a network of up to 8 interconnected XFP main panels. (Alternatively, up to 8 XFP repeaters can be connected to a non-networked main panel)

• Two independently programmable conventional sounder circuits

• Two programmable inputs, a fault output relay and three programmable relay outputs with volt free changeover contacts

• Zone dependency (coincidence), day/night (building occupied/unoccupied) and investigation delay period functions

• Individual device sensitivity settings

• Phased evacuation facility

• Code or keyswitch entry to Access Levels 2 & 3 (dependent on model purchased)

• 40 characters of custom text per device

• 500 event monitoring

• Comprehensive test, maintenance and commissioning functions (including auto-learn loops, monitor a point, test outputs, OMT and loop continuity test)

• An intuitive Windows based upload-download PC program

• Fully compatible with C-TEC’s new Hush Button fire alarm solution for houses of multiple occupation (see page 14)

XFP 1-2 LOOP EN54 NETWORKABLE FIRE PANELS

XFP501E/H XFP Networkable single loop 16 zone panel £360.00 nHochiki ESP version, code entry, c/w 1.4A psu, plastic enclosureLPCB certified to EN54-2/4. (Max. 2 x 3.4Ah batteries)

XFP501EK/H XFP Networkable single loop 16 zone panel £370.00 nHochiki ESP version, key entry, c/w 1.4A psu, plastic enclosureLPCB certified to EN54-2/4. (Max. 2 x 3.4Ah batteries)

XFP501/H XFP Networkable one loop 32 zone panel (LPCB approved to EN54-2/4) £526.50 nHochiki ESP version, code entry, c/w 3A psu, metal enclosureLPCB certified to EN54-2/4. (Max. 2 x 7.0Ah batteries)

XFP501K/H XFP Networkable one loop 32 zone panel (LPCB approved to EN54-2/4) £536.50 nHochiki ESP version, key entry, c/w 3A psu, metal enclosureLPCB certified to EN54-2/4. (Max. 2 x 7.0Ah batteries)

XFP502/H XFP Networkable two loop 32 zone panel (LPCB approved to EN54-2/4) £661.50 nHochiki ESP version, code entry, c/w 3A psu, metal enclosureLPCB certified to EN54-2/4. (Max. 2 x 7.0Ah batteries)

XFP502K/H XFP Networkable two loop 32 zone panel (LPCB approved to EN54-2/4) £671.50 nHochiki ESP version, key entry, c/w 3A psu, metal enclosureLPCB certified to EN54-2/4. (Max. 2 x 7.0Ah batteries)

For bezels and stainless steel enclosures see XFP ancillaries section below

XFP 1-2 LOOP NETWORKABLE ANALOGUE ADDRESSABLE FIRE PANELS (TO EN54-2/4)

XFP510-16 XFP Networkable repeater panel, 16 zones (all protocols) £262.00 nCode entry, c/w psu, plastic enclosure (Max. 2 x 3.4Ah batteries)

XFP510-16K XFP Networkable repeater panel, 16 zones (all protocols) £270.00 nKeyswitch entry, c/w psu, plastic enclosure (Max. 2 x 3.4Ah batteries)

XFP510-32 XFP Networkable repeater panel, 32 zones (all protocols) £360.00 nCode entry, c/w psu, metal enclosure (Max. 2 x 7.0Ah batteries)

XFP510-32K XFP Networkable repeater panel, 32 zones (all protocols) £370.00 nKeyswitch entry, c/w psu, metal enclosure (Max. 2 x 7.0Ah batteries)

CFP761 CFP/XFP network communications card for XFP 16 zone panels £60.34 n(all protocols, one required per master for network or repeater function)

AFP711 CFP/XFP network communications card for XFP 32 zone panels £91.00 n(all protocols, one required per master for network or repeater function)

AFP385 Flush mounting bezel (for XFP 32 zone masters & repeaters) £28.99 n

BF359/3S Stainless steel glazed enclosure for XFP one/two 32 zone panels only £280.00 nRequires BF359/3CL or BF359/3SL lock kit

BF359/3CL Cam lock kit for BF359/3S stainless steel enclosure £23.85 n

BF359/3SL Electromagnetic solenoid lock kit for BF359/3S stainless steel enclosure £200.00 n

AFP709 XFP printer kit, incl. lead & socket (not compatible with XFP 16 zone panels) £342.15 n

XFP507 XFP Upload/download software (Windows 2000/XP) c/w SAF7070000 lead £80.00 n

SAF7070000 2m Programming lead ONLY (4 way molex to 9-way RS232 ‘D’ female) £15.50 n

BF232 RS232 to USB convertor (allows SAF7070000 to connect to a PC’s USB connector) £40.00 n

XFP ANCILLARIES (REPEATERS, NETWORK CARDS, ENCLOSURES, PRINTERS AND SOFTWARE)

NEW

NEW

NEW

NEW

NEW

NEW



AFP 1-2 LOOP EN54 FIRE PANELS

AFP701E/W AFP economy 1 loop panel, does not extend (System Sensor version) £396.90 n(Max. 2 x 7.0Ah batteries)

AFP701/W AFP 1 loop panel, extends to 2 loop, (System Sensor version) £552.83 n(Max. 2 x 7.0Ah batteries)

AFP701/WM AFP 1 loop panel, extends to 2 loop, (System Sensor version) £647.33 n(Max. 2 x 7.0Ah batteries)

AFP702/W AFP loop driver card (System Sensor version) £141.75 n

AFP 1-2 LOOP ANALOGUE ADDRESSABLE FIRE PANELS (TO EN54-2/4)

AFP703 AFP 16 zone extension LED kit (all protocols) £189.00 n

AFP710* AFP 16 zone fully functional repeater (all protocols). Max. 2 x 7.0Ah batteries £514.50 n

AFP711* AFP network driver card, 1 per repeater system, fit at master (all protocols) £91.00 n

AFP709 AFP printer kit including printer, lead and socket £342.15 n

AFP385 AFP flush mounting bezel, fits all AFP variants £28.99 n

AFP707 AFP Upload/download software (Windows 2000/XP) c/w SAF7070000 lead £84.00 n



BF359/3S Stainless steel glazed enclosure for XFP one/two 32 zone panels only £280.00 n



AFP ANCILLARIES (REPEATERS, NETWORK CARDS, PRINTERS AND SOFTWARE)

AFP701E/N AFP economy 1 loop panel, does not extend (Nittan version) £396.90 n(Max. 2 x 7.0Ah batteries)

AFP701/N AFP 1 loop panel, extends to 2 loop, (Nittan version) £552.83 n(Max. 2 x 7.0Ah batteries)

AFP701/NM AFP 1 loop panel, extends to 2 loop, (Nittan version) £647.33 n(Max. 2 x 7.0Ah batteries)

AFP702/N AFP loop driver card (Nittan version) £141.75 n

AFP 1-2 LOOP ANALOGUE ADDRESSABLE FIRE PANELS (TO EN54-2/4)• Designed to comply with EN54 parts 2 & 4

• System Sensor or Nittan protocols

• 16 zonal alarm LEDs, expandable to 32

• Four conventional sounder circuits

• Alert, reset, ‘class change’ & silence inputs

• Auxiliary fire, fault, remote, pre-alarm, reset and 24V outputs

• Programmable delay / phased evac. facilities

• Intuitive PC programming software

• Optional AFP Network Driver Card allows the connection of up to 15 AFP repeaters*

Items marked * not compatible with AFP Economy panels

XFP508H BS5839-6 Hush Button (Hochiki ESP) £70.00 n

XFP508X BS5839-6 Hush Button (Apollo XP95/Discovery/Xplorer) £70.00 n

BS5839-6 HUSH BUTTONS

BS5839-6 HUSH BUTTONS

HushButton

HUSH

HushButton

HUSHEOLs

EOLs

Dwelling 1

Dwelling 2

Max. 20 Hush Buttons per loop (dependent on host panel output current and devices connected)

Communal analogueaddressable fire panel

Conventional detectors and sounders wired in 2 x 2 corefire resistant screened cable (2 cores per circuit).

Alternatively, 1 x 3 core cable can be used as 0V is common. Max. cable length = 100m

2 x 2 core

2 x 2 core

Apollo XP95 or Hochiki ESP

Analogue loop

• A new BS5839-6 compliant fire alarm solution for houses of multiple occupation (HMOs)

• Designed to sit on an Apollo or Hochikianalogue addressable loop (see right)

• Each Hush Button has its own conventionaldetector circuit, conventional sounder circuit and onboard loop isolator

• Provides each HMO dwelling with a two-minute silence facility and 15-minute isolate facility



XP95 DetectorsBF302XPH 55000-400 standard temperature (55ºC) heat detector, no base £42.00 n

BF303XPH 55000-401 high temperature (90ºC) heat detector, no base £42.00 n

BF314XPH 55000-885 multisensor, no base £58.33 n

BF316XPH 55000-600 optical smoke detector, no base £43.00 n

BF317XPH 55000-500 ionisation smoke detector, no base £43.00 n

BF308XP 45681-210 standard base c/w XPERT card £5.00 n

BF308XPR 45681-242 low power relay base c/w XPERT card £27.00 n

BF308XPC 38531-771 blank XPERT card £0.53 n

BF308XPC126 45682-127 Complete set of 126 pre-addressed XPERT cards £54.00 n

XP95 Beam DetectorsBF369XBD 55000-265 loop powered beam detector (incl. transmitter, receiver & interface) £839.00 n

BF369X/1 55000-268 loop powered reflective beam detector (5-50m, 1 reflector supplied) £714.28 n

BF369X/2 55000-273 loop powered reflective beam detector (50-100m, 4 reflectors supplied) £771.43 n

BF369XFD 55000-295 loop powered flame detector in flameproof housing £2187.50 n

XP95 Manual Call pointsBF370XP 55100-905 manual addressable call point, red £43.75 n

BF370XPG 39117-217 spare glass for manual addressable call point £0.72 n

XP95 IsolatorsBF308XP/20 45681-321 isolating base (isolates up to 20 devices) £32.00 n

AFP735 55000-720 isolator, needs BF308XPI base £35.00 n

BF308XPI 45681-211 isolator base (for use with AFP735) £6.50 n

AFP735DD 55000-802 dual isolator, DIN style £77.14 n

XP95 Loop Powered Sounders, Beacons and Sounder/Beacon combinationsBF330XBSI 45681-277 integrated base sounder with isolator (55-91dB) £42.86 n

BF330XRBI 45681-330 sounder beacon base with isolator (55-91dB) £95.71 n

BF330XBSCR 45681-293 locking red cap for use with sounder/bases/beacons £2.86 n

BF330XBSCW 45681-292 locking white cap for use with sounder/bases/beacons £2.86 n

BF330XAB 45681-276 ancillary base sounder £37.14 n

BF330XASR 55000-278 red stand alone loop powered sounder 100/92dB £74.28 n

BF330XASW 55000-279 white stand alone loop powered sounder 100/92dB £74.28 n

BF330XSR 55000-001 Sonos open area red sounder with isolator £58.57 n

BF330XSW 55000-002 Sonos open area white sounder with isolator £58.57 n

BF330XSRBR 55000-005 Sonos open area red sounder beacon with isolator £88.00 n

BF330XSRBC 55000-006 Sonos open area clear sounder beacon with isolator £88.00 n

BF333XSR 55000-009 Sonos open area red beacon with isolator £54.00 n

BF333XSC 55000-010 Sonos open area clear beacon with isolator £54.00 n

BF340X 55000-877 loop powered beacon £44.11 n

BF340XBI 45681-333 beacon base with isolator £45.71 n

XP95 ModulesXFP508X BS5839-6 Hush Button (XP95/Discovery/Xplorer), requires double gang back box £70.00 n

AFP730I 55000-847 input output unit, with isolator (includes back box) £91.67 n

AFP730D 55000-803 input output unit, DIN style £87.14 n

AFP730MS 55000-875 input output unit, mains switching £127.78 n

AFP732I 55000-852 sounder control unit with isolator (includes back box) £111.42 n

AFP732D 55000-826 sounder control unit, DIN style £114.29 n

AFP732DH 55000-181 hi-power sounder control unit, DIN style £129.28 n

AFP733I 55000-849 output unit with isolator (includes back box) £84.72 n

AFP733D 55000-804 output unit, DIN style £78.57 n

AFP734I 55000-845 zone monitor with isolator (includes back box) £90.27 n

AFP734ID 55000-812 zone monitor with isolator, DIN style £88.89 n

AFP736I 55000-843 switch monitor with isolator (includes back box) £79.17 n

AFP736D 55000-822 switch monitor, DIN style £80.56 n

AFP737I 55000-841 switch monitor plus with isolator (includes back box) £90.69 n

AFP737D 55000-821 switch monitor plus, DIN style £87.50 n

AFP738 55000-832 mini switch monitor with interrupt (no back box required) £50.51 n

AFP731D 55000-760 mini switch monitor with isolator, DIN style £59.00 n

If the module you require is not listed, please contact our sales deskcontinues >>>

APOLLO XP95 ANALOGUE ADDRESSABLE PERIPHERALS

ANALOGUE ADDRESSABLE PERIPHERALSPROTOCOL-SPECIFICDETECTORS, CALLPOINTS, SOUNDERS, BEACONS, MODULES, ETC.



XFP508X BS5839-6 Hush Button (XP95/Discovery/Xplorer), requires double gang back box £70.00 n

BF330CASR 24V red VTG loop powered sounder c/w shallow base £48.50 n

BF330CASW 24V white VTG loop powered sounder c/w shallow base £48.50 n

BF330CASR2 24V red VTG loop powered sounder (slow whoop version) c/w shallow base £49.00 n

BF330CADR 24V red VTG loop powered sounder c/w deep base £49.50 n

BF330CADW 24V white VTG loop powered sounder c/w deep base £49.50 n

BF330CADR2 24V red VTG loop powered sounder (slow whoop version) c/w deep base £50.00 n

BF340CASR 24V red VTG loop powered beacon c/w shallow base £42.94 n

BF340CADR 24V red VTG loop powered beacon c/w deep base £43.58 n

BF333CASR 24V red VTB loop powered sounder/beacon c/w shallow base £71.30 n

BF333CASW 24V white VTB loop powered sounder/beacon c/w shallow base £71.30 n

BF333CADR 24V red VTB loop powered sounder/beacon c/w deep base £72.30 n

BF333CADW 24V white VTB loop powered sounder/beacon c/w deep base £72.30 n

BF330CR 24V white VCT loop powered base sounder £36.55 n

BF330CRLIDW Optional white lid for BF330CR (required for stand alone use) £4.13 n

Also available: The AVAC XP95-compatible voice alarm system - see page 19 for details

C-TEC MANUFACTURED PERIPHERALS DESIGNED FOR USE WITH APOLLO XP95 & DISCOVERY FIRE PANELS

XP95 ‘Xpander’ radio smoke and heat detection devicesBF302XPXH 11171 CS heat detector with radio base/address module £285.71 n

BF303XPXH 11170 A1R heat detector with radio base/address module £285.71 n

BF314XPXH 13032 multisensor detector with radio base/address module £328.57 n

BF316XPXH 12034 optical detector with radio base/address module £285.71 n

BF370XPX 14006 manual call point with integral radio address module £271.42 n

BF330XAXSR 14001 Red stand alone sounder with red radio base £371.42 n

BF330XAXSW 14002 White stand alone sounder with white radio base £371.42 n

BF333XAXR 14003 Red stand alone sounder beacon with red radio base £428.57 n

BF333XAXA 14004 Amber stand alone sounder beacon with white radio base £428.57 n

BF333XAXC 14005 Clear stand alone sounder beacon with white radio base £428.57 n

AFP746 14007 Interface module with isolator, takes 15 addresses, incl aerial £571.42 n

AFP746S 14008 External standard aerial £185.71 n

AFP746D 14009 External directional aerial £328.57 n

AFP746ST 14010 Survey tool £500.00 n

APOLLO XP95 ANALOGUE ADDRESSABLE PERIPHERALS

BF302DH 58000-400 heat detector, no base £52.00 n

BF314DH 58000-700 multisensor detector, no base £71.50 n

BF316DH 58000-600 optical smoke detector, no base £53.00 n

BF317DH 58000-500 ionisation smoke detector, no base £53.00 n

BF313DH 58000-300 carbon monoxide fire detector, no base £71.50 n

BF370DP/S 58100-910 surface mounting manual call point c/w back box £53.00 n

BF370DP/F 58000-920 flush mounting manual call point c/w terminal tray £63.00 n

BF370DP/SI 58100-908 surface mounting manual call point with isolator c/w back box £62.57 n

BF370DPWI 58100-951 weatherproof call point with isolator, IP67 £185.71 n

Note all XP95 bases, isolators, interfaces, sounders and beacons are also compatible with the Discovery range.

APOLLO DISCOVERY ANALOGUE ADDRESSABLE PERIPHERALS



HOCHIKI ESP ANALOGUE ADDRESSABLE PERIPHERALS

Hochiki ESP DetectorsBF302HEH ACB-E Fixed temperature/ROR heat sensor, no base £47.00 n

BF302HEWH ACB-E/W Fixed temperature/ROR heat sensor, weatherproof, no base £95.71 n

BF314HEH ACA-E Multi-sensor, no base £70.00 n

BF316HEH ALG-EN Photo-electric smoke sensor, no base £43.70 n

BF317HEH AIE-E Ionisation smoke sensor, no base £52.00 n

BF308HE YBN-R/3 Sensor base £5.30 n

Hochiki ESP Manual Call pointsBF370H HCP-E Addressable call point, flush, red (no back box) £47.15 n

BF370HD HCP-DPS Addressable call point, flush, red, dual pole (no back box) £99.71 n

BF370HW HCP-W Addressable call point, red, weatherproof c/w back box £157.76 n

BF370HB SR Surface mounting back box, red £3.57 n

BF370HB3 SR-1T Surface mounting back box, red, 1 terminal for BF370HD £5.00 n

Hochiki ESP IsolatorsBF308HEI YBO-R/SCI Short circuit isolator base, needs AFP755C for stand alone use £27.14 n

AFP755C S/ICAP Isolator cover for wall mounting BF308HEI £2.15 n

AFP755D CHQ-SCI/DIN DIN rail mounting short circuit isolator £43.55 n

Hochiki ESP Loop Powered Sounders, Beacons and Sounder/Beacon combinationsBF330HE YBO-BS Loop powered base sounder (needs BF308HE base) £41.25 n

BF330HEB YBO-BSB Loop powered base sounder with beacon (needs BF308HE base) £73.54 n

BF330H CHO-WS2 Loop powered 100dB wall mounting sounder £57.37 n

BF330H/IB YBO-R/SCI Red isolator base for BF330H £22.71 n

BF330H/WK WS2-WPK Weatherproof kit for BF330H £12.14 n

BF330H/RB YBO-R/3 Red mounting base for BF330H £3.10 n

BF330H/RBI YBO-RSCI Red isolator base for BF330H £24.09 n

AFP755C SI/CAP Cover for BF330HE, BF330HEB, BF308HEI sounder/isolators £2.15 n

BF340HE CHQ-AB Loop powered beacon, red £46.05 n

BF340HEA/B CHQ-AB (AMB/BLU) Loop powered beacon, amber/blue £46.05 n

Hochiki ESP ModulesXFP508H BS5839-6 Hush Button (Hochiki), loop powered (needs double gang back box) £70.00 n

AFP752 CHQ-DSC Dual sounder controller c/w isolator £128.57 nrequires 24VDC supply (needs AFP750B)

AFP753 CHQ-DRC Dual relay controller c/w isolator, loop powered (needs AFP750B) £94.14 n

AFP753D CHQ-R/DIN DIN rail mounting dual relay controller (J type) £99.28 n

AFP753/240 CHQ-MRC Mains relay controller c/w isolator, loop powered (needs AFP750B) £82.85 n

AFP754 CHQ-Z Dual zone monitor, requires 24VDC supply (needs AFP750LB) £136.42 n

AFP754M CHQ-SZM Single zone monitor c/w isolator, loop powered (needs AFP750B) £77.85 n

AFP754DM CHQ-MZ/DIN DIN rail mounting mini zone monitor (J type) £88.42 n

AFP756 CHQ-DIM Dual input monitor c/w isolator, loop powered (needs AFP750B) £72.15 n

AFP756D CHQ-S/DIN DIN rail mounting dual switch monitor (J type) £82.71 n

AFP759 CHQ-Z(IS) Intrinsically safe dual monitor (needs AFP750LB) £256.42 n

AFP760 CHQ-SCI/DIN DIN rail mounting short circuit isolator (J type) £42.86 n

AFP750A CHQ-ADAPTOR ESP CHQ adapter £4.86 n

AFP750B CHQ-BOX I/O box £11.42 n

AFP750LB CHQ-BOX/L I/O unit large box £17.85 n

AFP751 CHQ/ARI Loop powered remote indicator £47.17 n

Hochiki ESP Ancillary EquipmentAFP757 O/CALG/SLR Outer cover removal tool £97.75 n

AFP758 TCH-B100 Hand held address programmer £121.87 n


A low-cost, high quality modular voicealarm system purposely designed tosimplify the provision of a fully BS5839-8compliant voice alarm system. In onecompact wall-mounting enclosure, theAVAC comprises:-

• A straightforward fire alarm interface that can be connected to any analogue addressable fire alarm system via a series of input/output units on the loop

• An Apollo specific interface for direct connection to an XP95 or Discovery loop

• A high-quality digital message store containing programmable Evacuate, Alert and Test messages

• A prioritised mixer

• Two x 60-Watt max. peak Class D amplifiers (plus an optional standby amp)

• An EN54-4 compliant switch mode power supply and battery charger

• Three balanced line level inputs for the (optional) connection of a fire mic, paging/public address equipment and a background music source

• Space for 2 x 7Ahr VRLA batteries typically providing at least 24 hours standby and 30 mins alarm running time

• A slave line level output allowing the connection of up to 26 slave AVACs

AVAC VOICE ALARM SYSTEM

VA403 Master AVAC dual 60W amplifier, charger & PSU £1,100.75 nincludes fire alarm interface, fire microphone, paging and BGM connections

VA403H Master AVAC dual 60W amplifier, charger & PSU c/w ‘hotswap’ standby amp. £1,275.00 nincludes fire alarm interface, fire microphone, paging and BGM connections

VA402 Slave AVAC dual 60W amplifier, charger & PSU £795.00 nincludes local paging and BGM connections

VA402H Slave AVAC dual 60W amplifier, charger & PSU c/w ‘hotswap’ standby amp. £930.00 nincludes local paging and BGM connections

VA405 Emergency microphone (max. 1 per system) £450.00 n

VA407 Emergency microphone for multi-mic applications (2 to 4 per system) £600.00 n2 x VA407s limits the no. of master AVACs to 20, 3 x VA407s to 10, 4 x VA407s to 6

VA406 Line level paging microphone (max. 1 per system) £250.00 n

AVAC MODULES, AMPLIFIERS & ANCILLARIES

VA421A 6” 6W ceiling speaker £36.55 nc/w steel fire dome & ceramic terminal block

VA422A 8W wall mounting metal cabinet speaker £51.28 nc/w ceramic terminal block

VA423 8W wall mounting bi-directional metal speaker £63.15 nc/w ceramic terminal block

VA428 20W pendant loudspeaker £88.55 nc/w 8m cable and internal stress wire (requires VA490 or VA492)

VA430 6W round wall/ceiling speaker in metal cabinet £37.05 nc/w ceramic terminal block

VA490 Ceramic terminal block and thermal fuse assembly £4.21 n(use to convert wire-end sealers to BS 5839-8, needs adaptable back box)

VA492 VA loudspeaker metal termination box £19.34 nc/w 2 x ceramic terminal blocks and thermal fuses

Speakers for special applications - column, horn, sound projection, spherical suspension, etc -areavailable to order. Please contact our technical department for details.

LOUDSPEAKERS (TO BS 5839-8)

VOICE ALARM SYSTEMS

TOTAL CAPABILITY VA/PA SYSTEMSFrom a simple single zone alarm system in a shop unit to a school, theatre or hotel with multiple zones and many hundredsof speakers, we have the equipment and expertise to provide a compliant and cost-effective VA/PA solution.

Our AVAC, Integrity, LinX and SigNET LS voice alarm systems are installed in buildings all over the world including theatres,multi-screen cinemas, international airports, shopping centres, high rise buildings, offices, hotels, leisure centres, footballstadia, exhibition centres, railway stations and theme parks.

Should you require any further information, please contact our Specialist Support Division which specialises in project supplychain management, sales training (system design and application), engineer training (installation and commissioning) andproduct application guidance. Call 07775 953174 for details.

LOADMASTER Loudspeaker line tester £137.85 n

PNGN Pink noise generator £61.90 n

AVAC TESTING EQUIPMENT


SIGTEL EMERGENCY VOICE COMMUNICATION SYSTEM

ECU-8 8 Line Master EVC control unit c/w line cards, handset and display £1085.00 nWall-mounting, needs 2 x 7.0Ah batteries

ECU-8NT 8 Line Master EVC control unit (no handset) c/w line cards and display £910.00 nWall-mounting, needs 2 x 7.0Ah batteries(typically used on networked systems that do not require multiple control points)

ECU-8S 8 Line Slave EVC expansion unit (expands ECU-8/ECU-8NT to 16 lines) £757.00 nWall-mounting, max. one ECU-8S per ECU-8/ECU-8NT, no batteries required

ECU721 Network communication card £105.00 n(allows up to four ECU-8 or ECU-8NT controllers to be interlinked - one required per networked ECU-8 or ECU-8NT)

AFP385 Grey flush bezel for ECU-8 controllers £28.99 n

BF359/2 Grey steel anti-tamper enclosure for ECU-8 controllers, surface mounting £273.00 n

BF359/2B Flush mounting bezel for BF359/2 enclosure £85.83 n

BF359/3D Stainless steel anti-tamper enclosure for ECU-8 controllers, flush mounting £290.00 n

BF359/3CL Cam lock kit for BF359/3D stainless steel enclosure £23.85 n

BF359/3SL Electromagnetic solenoid lock kit for BF359/3D stainless steel enclosure £200.00 n

SIGTEL 1-64 LINE CONTROLLERS

DISABLED REFUGE SYSTEMS

FOR DISABLED REFUGE & FIRE TELEPHONE APPLICATIONS

CCU-16 16 line master EVC control unit with display, wall-mounting £952.00 nNeeds a separate ECU desk dial unit, LC2/LC3 line cards and 2 x 7.0Ah batteries

SCU-16 16 line slave EVC expansion unit (expands CCU-16 in 16 line multiples) £595.00 nWall-mounting, needs LC2/LC3 line cards and 2 x 7.0Ah batteriesMax. seven SCU-16 slaves per CCU-16 master (allows up to 128 lines)

LC2 2-way Line Card for Type A Fire Telephone Outstations £24.99 nOne card required per two Type A outstations connected to a CCU or SCU

LC3 2-way Line Card for Type B Disabled Refuge Outstations £22.14 nOne card required per two Type B outstations connected to a CCU or SCU

SVMM Two message card for CCU (optional) £238.00 n

SVMM/C Custom message card for CCU (optional) £599.00 n

AFP385 Grey flush bezel for CCU-16 or SCU-16 £28.99 n

ECU-32 32 line Desk control unit with handset and display £1,428.00 n



ECUWMB Wall Mount Bracket for ECU-32, ECU-64, ECU-128 £14.50 n

For outstations and accessories, please refer to the SigTEL Compact listing above

SIGTEL 16-128 LINE CONTROLLERS & DIAL UNITS

THS1-E/MK4 Fire telephone EVC outstation, c/w red steel case, handset & key £211.82 n

THS1-ET/MK4 Fire telephone EVC outstation, c/w red steel case, handset & T-Bar £211.82 n

T-BEZ Red flush bezel for THS1-E/MK4 and THS1-ET/MK4 £14.28 n

THS/MK4 Red desk mounted telephone ONLY £116.62 n

FIRE TELEPHONE (TYPE A) OUTSTATIONS

EVC302F Handsfree duplex EVC outstation, stainless steel, flush mounting £176.00 n

EVC302S Handsfree duplex EVC outstation, stainless steel, surface mounting £187.55 n

BF359/1 Weatherproof enclosure, IP66, steel, non-locking (for EVC302F) £110.00 n

DISABLED REFUGE (TYPE B) OUTSTATIONS

FiTT EVC line tester £120.00 n

CATCON Adaptor box to convert fire-rated cable to Cat 5 £22.20 n

XSB Blue xenon strobe, 12V £30.00 n

XSA Amber xenon strobe, 12V £30.00 n

SDM Strobe driver module, 12V £15.00 n

BC286/2 24V Volt 7.0 Ahr SLA battery (2 x 12V including link wire) £39.54 n

Contact our sales desk for information on acoustic hoods

SIGTEL ACCESSORIES

• Meets and exceeds the requirements of BS 5839 part 9

• Ideal for all disabled refuge, fire telephone and stadium marshal applications

• Compact 1-8 line (expandable to 16 lines)wall-mounting central controller saves valuable desk and floor space in crowded control rooms

• New network communication card allows up to four master controllers to be interlinked allowing systems of up to 64 lines to be easily implemented

• Type B stainless steel ‘Disabled Refuge’ outstations offer true duplex hands-free speech - flush, surface and weatherproof versions are available

• Type A ‘Fire Telephone’ outstations come in locking or non-locking red steel cabinetsand offer true duplex speech - semi-flush and surface versions are available

• Unique ‘auto-learn’ facility allows fast network set up

• All extensions can be named with user-defined text of up to 15 characters

• Fully monitored hardware and software

• System operates at 24 VDC

• In the event of mains failure, operation can be maintained for 24 hours (standby) and 3 hours (in use) using 2 x 12V 7 Ahr batteries

• Optional line tester allows cable faults to be checked prior to equipment connection

• Ideal for hotels, shopping malls, office blocks, transport terminals, banks, sports stadia, entertainment complexes, auditoria, etc.

• 16-128 line wall/desk mounting central control equipment also available for larger systems

SIGTEL COMPACT (1-64 LINE) SYSTEM

SIGTEL (16-128 LINE) SYSTEM

NEW

NEW

NEW

NEW

NEW


CONVENTIONAL CALL SYSTEMS

DISABLED PERSONS TOILET ALARMS

800 SERIES CONVENTIONAL CALL SYSTEM

NC951 Disabled persons toilet alarm kit £107.63 nIncludes NC942B call controller c/w onboard battery backup facility, NC807C ceiling pull, NC806CS overdoor light c/w sounder, NC809DBB reset point c/w sounder & NC949 Disabled WC sticker

NC951STRIP Disabled persons toilet alarm kit c/w 1.5m strip switch £185.00 nIncludes NC942B call controller c/w onboard battery backup facility, NC807C ceiling pull, NC806CS overdoor light c/w sounder, NC809DBB reset point c/w sounder, BF358/3 1.5m strip switch, NC889 call latch module & NC949 Disabled WC sticker

NC951/SS Stainless steel single zone call system kit £161.70 nIncludes NC941/SS s/steel call controller, NC807C plastic ceiling pull, NC806CS/SS s/steel overdoor light c/w sounder, NC809DB/SS s/steel reset point & NC949 Disabled WC sticker (no onboard battery backup)

All of the above systems can be expanded to include multi-zone indicator panels and/or additional callingdevices, sounders, overdoor lights, etc. Refer to our full 800 Series listing below for further details.

DISABLED PERSONS TOILET ALARMS / SINGLE ZONE EMERGENCY ASSISTANCE SYSTEMS

Capable of indicating standard and emergency calls

NC942 Single zone call controller c/w 12V 140mA PSU, reset button & relay £73.50 n

NC942B Single zone call controller c/w 12V 140mA PSU, reset button, relay & £81.90 non-board rechargeable battery backup supply

NC941 Single zone call controller c/w 12V 250mA PSU & reset button £73.50 n

NC941/SS Single zone call controller, s/steel, c/w 12V 250mA PSU & reset button £132.30 n

NC941B 0.3AHr battery backup kit, for use with NC941 & NC941/SS controllers £58.20 n

800 SERIES SINGLE ZONE EMERGENCY INDICATOR PANELS

Capable of indicating standard and emergency calls

NC944 Four zone call controller c/w mute/reset button, requires 12V PSU £57.75 n

NC944/SS Four zone call controller, s/steel, c/w mute/reset button, requires 12V PSU £181.60 n

NC930 12V 250mA PSU, powers up to 2 x four zone call controllers £52.50 n

NC930/SS 12V 250mA PSU, s/steel, powers up to 2 x four zone call controllers £149.28 n

NC941B 0.3AHr battery backup kit, for use with NC930 and NC930/SS 12V PSUs £58.20 n

NC925B1 12V 1A white boxed PSU, powers up to 3 x four zone call controllers £66.29 n

AC284 2.3AHr backup battery, for use with NC925B1 12V PSU £10.54

800 SERIES 4-12 ZONE EMERGENCY INDICATOR PANELS

Capable of indicating standard and emergency callsNC812KE 10 Zone Emergency master panel c/w 12V PSU, backup battery & mute button £208.66 n

NC811KE 10 Zone Emergency repeater panel £156.46 n

NC822KE 20 Zone Emergency master panel c/w 12V PSU, backup battery & mute button £284.03 n










Larger Emergency master and repeater panels available to order, add per 10 zones £143.52 n

800 SERIES 10-60 ZONE EMERGENCY INDICATOR PANELS

• Tried, trusted and respected

• Hundreds of applications - suitable for use in hotels, leisure centres, nursing homes, shops, offices, GP surgeries, etc

• 12V d.c. system - simple to install, easy to use and highly reliable - standard six coresecurity cable ideal for most installations

• Wide range of indicator panels covering 1 to 90 zones

• Extensive range of ancillaries including ceiling pulls, wall-mounting call points, monitoring points, water resistant alert points, overdoor lights, infrared ceiling receivers, remote sounders and relays

• Attractive compact design

• Most wall-mounting components fit 25mm

UK single or double gang back boxes. Ceiling pulls and water resistant alert points are surface mountable.

• Two levels of call - standard (constant tone)and emergency (intermittent tone) (dependent on items purchased)

• No limit to system size - components can be mixed to meet the layout and call communication requirements of virtually any building

• Stainless steel versions of many components now available

Capable of indicating standard calls ONLYNC810K 10 Zone Standard master panel c/w 12V PSU & reset button £168.33 n

NC811K 10 Zone Standard repeater panel £142.23 n

NC820K 20 Zone Standard master panel c/w 12V PSU & reset button £236.84 n




continues overleaf>>>

800 SERIES 10-60 ZONE STANDARD INDICATOR PANELS

• NC951 includes everything required for a BS8300 clause compliant emergency assistance alarm (except cables & fixings)

• NC951STRIP kits (with an additional 1.5m strip switch and call latch module) and NC951/SS Stainless steel kits also available



Capable of indicating standard calls ONLYNC840K 40 Zone Standard master panel c/w 12V PSU & reset button £427.28 n






Larger Standard master and repeater panels available to order, add per 10 zones £130.50 n

800 SERIES 10-60 ZONE STANDARD INDICATOR PANELS (continued)

Can be used to increase call indication levelsNC806C Overdoor light £16.30 n

NC806CS Overdoor light & sounder £25.61 n

NC806C/SS Overdoor light, s/steel £45.39 n

NC806CS/SS Overdoor light & sounder, s/steel £51.77 n

NC887D Switchable sounder £23.92 n

NC888D Remote sounder £9.30 n

800 SERIES OVERDOOR LIGHTS AND SOUNDERS

Generate standard calls onlyNC807C Ceiling pull unit, no on-board reset, no remote socket £16.30 n

NC802DB Standard call point, button reset, with remote socket £20.93 n

NC802DBB Standard call point with braille label, button reset, with remote socket £29.88 n

NC802DM Standard call point, magnetic reset, with remote socket £20.93 n

NC917L Standard call push with protruding button, no on-board reset, no remote socket £18.26 n

NC802DEWM Master IP65 water resistant alert point, mag. reset, no remote socket £87.27 n

NC802DEWS Slave IP65 water resistant alert point, up to 10 per master £83.16 n

NC802DESS IP69K sauna alert point (must be used as a slave to an NC802DEWM) £169.20 n

NC802DEM/SS Stainless steel call point, magnetic reset, no remote socket £100.59 n

800 SERIES STANDARD CALL POINTS

Generate standard calls onlyNC894DKB Isolatable monitoring point, button reset, no remote socket £29.95 n

NC894DKM Isolatable monitoring point, magnetic reset, no remote socket £29.95 n

800 SERIES STANDARD MONITORING POINTS (door contacts included)

Generate standard and/or emergency calls (as described)NC802DEB-1/2 Emergency call point, button reset, with remote socket £30.54 n

can generate standard and emergency callsNC802DEM Emergency call point, magnetic reset, with remote socket £30.54 n

can generate standard and emergency callsNC802DEWM Master water resistant alert point, IP65, mag. reset, no remote socket £87.27 n

can generate standard or emergency calls (not both)NC802DEWS Slave water resistant alert point, IP65, max. 10 per master £83.16 n

NC802DESS IP69K sauna alert point (must be used as a slave to an NC802DEWM) £169.20 n

NC802DEM/SS Stainless steel call point, magnetic reset, no remote socket £100.59 ncan generate standard or emergency calls (not both)

NC804DE Emergency call / reset point, button reset, no remote socket £27.90 ncan generate emergency calls only

NC809DEM Emergency call / reset point, magnetic reset, no remote socket £31.88 ncan generate emergency calls only

800 SERIES EMERGENCY CALL POINTS

Generate standard and/or emergency calls when triggered by a compatible infrared transmitterNC302RXC Infrared master ceiling receiver, no on-board reset, no remote socket £38.85 n

NC302RXCS Infrared slave ceiling receiver, up to 3 per master £30.00 n

NC802DERB Infrared call point, button reset, with remote socket £48.96 n

NC802DERM Infrared call point, magnetic reset, with remote socket £48.96 n

NC302RT Test infrared receiver £60.00 n

800 SERIES INFRARED CALL POINTS & CEILING RECEIVERS

For use with infrared call points & ceiling receiversQT412RXA Infrared transmitter, push/pull for emergency call £80.00 n

QT412RXCA Infrared transmitter, push for standard call/pull for emergency call £80.00 n

QT424/1 Single-way charging unit for QT412 range transmitters £15.00 n

QT424/10 Ten-way charging unit for QT412 range transmitters £185.00 n

800 SERIES INFRARED ‘STAFF ATTACK’ TRANSMITTERS



Can be used to reset devices which do not have an onboard reset facility NC809DB Button reset point £9.30 n

NC809DBB Button reset point c/w sounder and braille label £15.00 n

NC809DB/SS Button reset point, s/steel £45.78 n

NC809DM Magnetic reset point £9.30 n

NC899IRR Keyswitch reset point £27.00 n

800 SERIES RESET POINTS

For use with all magnetic call points, monitoring points and reset pointsNC803M/10 10 x magnetic reset keys £29.93 n

NC803M/50 50 x magnetic reset keys £141.75 n

800 SERIES MAGNETIC RESET KEYS

Generate standard calls via a call point’s remote socketNC805C/6 1.8m (6ft) tail call lead £10.65 n

NC805C/14 4.2m (14ft) tail call lead £11.97 n

NC805D 1.2-3.6m (4-12ft) tail call lead £16.30 n

NC805P Hand/foot pneumatic pad, requires 1 x NC805AS £27.60 n

NC805AS Remote air switch for NC805P £42.43 n

NC805MD Portable movement detector £365.21 n

NC805DSP Double remote jack socket, allows two ancillary calling devices to be connected £9.48 n

800 SERIES ANCILLARY CALLING DEVICES

Generate standard or emergency calls when used in conjunction with an NC889 or NC889ERMcall latch module (the call level generated depends on the call latch module used)BF358/1 0.3m strip switch kit (incl. satin silver base rail, red insert and end caps) £23.50 n

BF358/2 1m strip switch kit (incl. satin silver base rail, red insert and end caps) £69.28 n

BF358/3 1.5m strip switch kit (incl. satin silver base rail, red insert and end caps) £75.78 n



3m, 4m, 5m, 6m, 7m & 8m strip switch kits also available - contact our sales desk for details POA n

BF358/12 1.5m strip switch base rail, satin silver £55.52 n

BF358/15 1m strip switch insert, black £9.13 n

BF358/16 1m strip switch insert, red £9.13 n

BF358/17 Strip switch end caps, black (pair) £5.05 n

BF358/18 Strip switch internal/external corner unit c/w end caps, black £20.26 n

BF358/19 Wired sleeves and tags (pack of 5) £8.31 n

800 SERIES ‘STRIP SWITCHES’

NC889 Call latch module, can trigger a standard call from a n/o or n/c switch £10.73 n

NC889ERM Multi-purpose call latch module, can trigger a standard and/or an emergency £19.34 ncall from a normally open switch (includes confidence LED & on-board magnetic reset)

NC899KD Area isolator, can be used to isolate areas/zones £34.91 n

NC884DE Emergency 5:1 input expander, can be used to provide area/zonal indication £20.09 n

NC885 Standard 5:1 input expander, can be used to provide area/zonal indication £12.26 n

NC883D 12V relay unit, can be used to switch sirens, strobes, etc. £32.59 n

NC848/50 50 x anti-tamper screws, can be used to secure s/steel devices in high risk environments £96.00 n

NC947 Anti-tamper Allen key, for use with anti-tamper screws £9.48 n

DP874B/4 Tone only UHF paging transmitter, supplied with one tone-only pager £485.43DP875/4 Extra tone-only pager £195.00

MISCELLANEOUS 800 SERIES DEVICES





PLASTIC BACK BOXES

QT432 Infred/radio pendant transmitter (push for call) £40.00 n

800 SERIES INFRARED NECK PENDANT TRANSMITTERS



NC941/SS Single zone call controller, s/steel, c/w 12V 250mA PSU & reset button £132.30 n

NC944/SS Four zone call controller, s/steel, c/w mute/reset button, requires 12V PSU £181.60 n

NC930/SS 12V 250mA PSU, s/steel, powers up to 2 x four zone call controllers £149.28 n

NC802DEM/SS Stainless steel call point, magnetic reset, no remote socket £100.59 n

NC809DB/SS Stainless steel button reset point £45.78 n

NC806C/SS Overdoor light, s/steel £45.39 n

NC806CS/SS Overdoor light & sounder, s/steel £51.77 n

NC848/10 10 x anti-tamper screws £19.20 n

NC848/50 50 x anti-tamper screws £96.00 n


NC951/SS Stainless steel single zone call system kit £161.70 nNC941/SS s/steel call controller, NC807C plastic ceiling pull, NC806CS/SS s/steel overdoor light c/w sounder, NC809DB/SS s/steel reset point & NC949 Disabled WC sticker

800 SERIES STAINLESS STEEL DEVICES

800 SERIES STAINLESS STEEL DEVICES

• High quality brushed stainless steel versions of some of our most popular 800 Series devices - ideal for use in hospitals, clinics and many other private and public sector applications

• Optional anti-tamper screws available for use in high-risk environments

ADDRESSABLE CALL SYSTEMS


• Ideal for nursecall, general call and ‘staff attack’ applications

• Multiple call levels - standard call, help required (assist), emergency and optional infrared staff attack

• Up to 256 network devices per system

• Up to 45 custom place names per system

• Flexible call routing - allows the system to be tailored to suit a building’s exact operational needs

• Full monitoring of all network devices

• Free built-in 500 event datalogger

• Wide range of system components including call points, ceiling pulls, monitoring points, infrared ceiling receivers, radio receivers, infrared/radio transmitters, neck pendants, displays, overdoor lights and pagers

• Staff presence, call accept, manual and automatic call divert facilities

• Optional HTM2015 or 08-03 capability (requires 3rd-party switch assemblies and indicators used in conjunction with our Quantec universal devices - contact our technical department for advice).

QT601-2 Quantec controller (space available for 2 x 7.0Ah batteries) £325.00 n

AFP385 Flush bezel for Quantec controller £28.99 n

BF359/3S Stainless steel glazed enclosure for Quantec controller, requires BF359/3CL or 3SL lock kit £280.00 n



QT707 Quantec upload/download software c/w SAF7070000 lead (Windows 2000/XP) £80.00 n



QT707S Quantec Surveyor Data Management Software c/w wall socket & lead £300.00 n

QT603 Quantec network splitter £20.45 n

QUANTEC NETWORK CONTROLLERS, SOFTWARE AND INSTALLATION AIDS

QUANTEC ADDRESSABLE CALL SYSTEM

QT606 Quantec overdoor light £18.45 n

QT606A Quantec addressable overdoor light c/w sounder £42.00 n

SPE0656000 Quantec stainless steel addressable overdoor light c/w sounder, double gang £71.33 n

QT688 Quantec addressable sounder £41.00 n

QT688/2 Quantec high-output 85dB addressable sounder £46.15 n(with optional HTM2015 or 08-03 tone capability - requires QT423 configurator)

QUANTEC OVERDOOR LIGHTS & SOUNDERS

QT602 Quantec call point, button reset £36.50 n

QT602S Quantec call point with sounder, button reset £41.50 n

QT602R Quantec call point with IR receiver, button reset £59.50 n

QT602RS Quantec call point with sounder & IR receiver, button reset £64.50 n

QT602M Quantec call point, magnetic reset £36.50 n

QT602SM Quantec call point with sounder, magnetic reset £41.50 n

QT602RM Quantec call point with IR receiver, magnetic reset £59.50 n

QT602RSM Quantec call point with sounder & IR receiver, magnetic reset £64.50 n

QT602D Quantec Slave call point £22.00 n

QUANTEC QT602 CALL POINTS (WITH REMOTE SOCKETS)

QT609 Quantec call point, button reset £36.00 n

QT609S Quantec call point, button reset with sounder £41.00 n

QT609R Quantec call point, button reset with infrared receiver £59.00 n

QT609RS Quantec call point, button reset with sounder & infrared receiver £64.00 n

QT609M Quantec call point, magnetic reset £36.00 n

QT609SM Quantec call point, magnetic reset with sounder £41.00 n

QT609RM Quantec call point, magnetic reset with infrared receiver £59.00 n

QT609RSM Quantec call point, magnetic reset with sounder & infrared receiver £64.00 n

QUANTEC QT609 CALL POINTS (NO REMOTE SOCKETS)All of the items listed in our Quantec tradeprice list are fully compatible with eachother. However, if purchasing items for anexisting Quantec system, there may becompatibility issues, particularly on siteswhere old-style radio receivers QT322RX(SPE0441/000) and/or old-style infraredtransmitters or infrared call points/receiversare used. These compatibility issues are covered ingreater detail in technical bulletin no.1/020605 and technical bulletin no.4/150307 copies of which can bedownloaded from our website atwww.c-tec.co.uk/downloads/misc.htm orrequested from our sales/technical dept.

IMPORTANT NOTES

NEW

NEW

NEW

QT602E Quantec Euro call point, button reset (nurse label) £36.50 n

QT602ES Quantec Euro call point with sounder, button reset (nurse label) £41.50 n

QT602ER Quantec Euro call point with IR receiver, button reset (nurse label) £59.50 n

QT602ERS Quantec Euro call point with sounder & IR receiver, button reset (nurse label) £64.50 n

QT602EM Quantec Euro call point, magnetic reset (nurse label) £36.50 n

QT602ESM Quantec Euro call point with sounder, magnetic reset (nurse label) £41.50 n

QT602ERM Quantec Euro call point with IR receiver, magnetic reset (nurse label) £59.50 n

QT602ERSM Quantec Euro call point with sounder & IR receiver, mag reset (nurse label) £64.50 n

QUANTEC QT602E ‘EURO’ CALL POINTS (WITH REMOTE SOCKETS)

QT602CALL

POINTS

QT602ECALL

POINTS

QT609CALL

POINTS

SPE0677000 Quantec attack pull button, generates an attack call when pulled £93.25 n

SPE0678000 Quantec emergency pull button, button reset, generates an emgcy call when pulled £93.25 n

QUANTEC MISCELLANEOUS CALL POINTS

NEW

NEW

QT608C Quantec corridor display, with controls £149.00 n

QT608CD Quantec corridor display, no controls £149.00 n

SPE0614000 Quantec stainless steel corridor display, with controls £225.36 n

SPE0633000 Quantec stainless steel corridor display, no controls £197.46 n

QT608CD1 Quantec large corridor display (800x160x80mm) requires 1 x QT615 £332.50 n

QT615 Quantec display interface (for use with QT608CD1) £76.92 n

QUANTEC DISPLAYS

NEW

NEW

NEW



QT412RXA Quantec Mk2 Infrared/radio transmitter (push for attack/pull for attack) £80.00 n

QT412RXCA Quantec Mk2 Infrared transmitter (push for call/pull for attack) £80.00 n

QT424/1 Single-way charging unit for QT412 range transmitters £15.00 n

QT424/10 Ten-way charging unit for QT412 range transmitters £185.00 n

QT423 Quantec configurator (required to program QT412 range transmitters) £115.40 n

QUANTEC ‘STAFF ATTACK’ TRANSMITTERS, INFRARED/RADIO (868MHz) - SEE IMPORTANT NOTES, PAGE 24

Generate standard calls via a call point’s remote socket



NC805D 1.2-3.6m (4-12ft) tail call lead £16.30 n

NC805P Hand/foot pneumatic pad, requires 1 x NC805AS £27.60 n

NC805AS Remote air switch for NC805P £42.43 n

NC805MD Portable movement detector £365.21 n

NC805DSP Double remote jack socket, allows two ancillary calling devices to be connected £9.48 n

QUANTEC ANCILLARY CALLING DEVICES

QT422RX Quantec Mk2 radio receiver (compatible with QT412 range transmitters only) £212.10 n

QT422RXEX External extension aerial for QT422RX radio receiver £150.00 n

QT421 RF integrity ‘monitored heartbeat’ transmitter (use at least 1 per QT422RX) £84.60 n

QUANTEC Mk2 (868MHz) RADIO RECEIVERS - SEE IMPORTANT NOTES, PAGE 24

QT302RX Quantec master infrared ceiling receiver £60.00 n

QT302RXS Quantec slave infrared ceiling receiver £45.00 n

QT302RT Quantec test infrared ceiling receiver £50.00 n

QUANTEC INFRARED CEILING RECEIVERS

For use with Quantec infrared call points, infrared ceiling receivers and Mk2 radio receivers

QT604 Quantec monitoring point, button reset £36.90 n

QT604M Quantec monitoring point, magnetic reset £36.90 n

QUANTEC MONITORING POINTS

NC803M/10 Pack of 10 magnetic reset keys £29.93 n

NC803M/50 Pack of 50 magnetic reset keys £141.75 n

QUANTEC MAGNETIC RESET KEYS

SPE0616000 Quantec stainless steel call point, button reset, no remote socket, double gang £188.00 n

SPE0634000 Quantec stainless steel call point, key reset, c/w remote socket, double gang £225.40 n

SPE0613000 Quantec stainless steel isolatable call point, key reset, no remote socket, double gang £284.68 n

Default operation of the above is as per QT602 call points. However all units can be programmed using a QT423configurator to generate different levels of call for different button presses or keyswitch positions.

QUANTEC STAINLESS STEEL CALL POINTS

NEW

NEW

NEW

QT611 Quantec multi-purpose programmable device (unplated) £92.50 nAllows third-party switch assemblies & indicators to be interfaced to Quantec and to be engineer programmed to operate in a multitude of ways using a QT423 configurator

QT612 Quantec relay output device (unplated) £97.50 nA zone-specific relay output to trigger third-party strobes, sounders, auto-diallers, etc.

QT613 Quantec zonal indicator driver device (unplated) £92.50 nCan be used to drive third-party LED indicating devices

QT614 Quantec bedhead light dimmer interface (unplated) £30.00 n

QT423 Quantec configurator (required to program QT611/612/613/614 devices) £115.40 n

QUANTEC UNIVERSAL DEVICES

QT432 Quantec infrared/radio pendant transmitter (push for call) £40.00 n

QUANTEC NECK PENDANT TRANSMITTERS, INFRARED/RADIO (868MHz) - SEE IMPORTANT NOTES, PAGE 24

QT607 Quantec ceiling pull unit £16.00 n

QUANTEC CEILING PULLS

NEW





PLASTIC BACK BOXES



QT600P Quantec printer kit incl. printer, lead & wall socket £342.15 n

QT600S Quantec printer/paging wall socket £17.22 n

DP874QA Display pager transmitter for alphanumeric pagers, 400m range £841.71incl. display pager transmitter, lead and wall socket

DP876D Display pager aerial, up to 1500m range £95.00

DP876B Mounting bracket for DP876D £25.00

DP876F 15 metre low loss cable for DP876D £70.00

DP877QA 32 character alphanumeric display pager, group A £290.00

QUANTEC PRINTERS & PAGING EQUIPMENT

Generate standard calls (when connected to a Quantec call point), standard or emergency calls (when connected to a Quantec monitoring point) and standard, help required, emergency or attack calls (when connected to a QT611 universal programmable deviceBF358/1 0.3m strip switch kit (incl. satin silver base rail, red insert and end caps) £23.50 n





3m, 4m, 5m, 6m, 7m & 8m strip switch kits also available - contact our sales desk for details POA n

BF358/12 1.5m strip switch base rail, satin silver £55.52 n

BF358/15 1m strip switch insert, black £9.13 n

BF358/16 1m strip switch insert, red £9.13 n

BF358/17 Strip switch end caps, black (pair) £5.05 n

BF358/18 Strip switch internal/external corner unit c/w end caps, black £20.26 n

BF358/19 Wired sleeves and tags (pack of 5) £8.31 n

QUANTEC ‘STRIP SWITCHES’

NC848/10 10 x anti-tamper screws (can be used to secure s/steel devices in secure applications) £19.20 n

NC848/50 50 x anti-tamper screws (can be used to secure s/steel devices in secure applications) £96.00 n


MISCELLANEOUS

INDUCTION LOOP EQUIPMENT


PDA RANGE INDUCTION LOOP EQUIPMENT

• The widest range of audio-frequency induction loop equipment in the UK

• Designed to meet or exceed the requirements of BS7594 and BS-EN60118-4 when correctly installed

• Available in a variety of cost-effective kit formats suitable for use in ticket offices, meeting rooms, lecture theatres, nursing homes, GP surgeries, churches and shops

• Allows hearing aid users to participatefully in general conversation and other social/work related activities

• No audio experience required - C-TEC’s loop systems can be fitted by any competent electrician

• Extensive range of induction loop testing equipment now available including sine wave generators, magnetic field strength meters and loop listening devices

• Can be used to help building managersand service providers comply with BS8300, the Disability Discrimination Act, the Care Standards Act and the English Tourism Council’s National Accessibility Scheme

ML1/K ML1 counter induction loop kit £60.61 nc/w ML1 wall-mounting double gang loop amplifier, AMT mic. and TX2 counter loop

PDA102C PDA102 counter induction loop kit £140.73 nc/w PDA102 free-standing loop amplifier, AMT microphone and TX121 counter loop

1.5m2 COUNTER INDUCTION LOOP AMPLIFIER KITS

DL50 50m2 Domestic induction loop amplifier £85.00 n

DL50/K DL50 50m2 Domestic induction loop amplifier kit £98.00 nc/w DL50 free-standing loop amplifier, AMT tie/desk mic., APS scart lead & loop cable

PDA102L PDA102 50m2 Small room loop kit (tie/desk mic version) £120.10 nc/w PDA102 free-standing loop amplifier, AMT tie/desk microphone and loop cable

PDA102R PDA102 50m2 Small room loop kit (omni-directional plated mic. version) £135.10 nc/w PDA102 free-standing loop amplifier, APM plated microphone and loop cable

PDA102S PDA102 50m2 TV lounge loop kit £120.10 nc/w PDA102 free-standing loop amplifier, Scart lead and APL connection plate and loop cable

50m2 INDUCTION LOOP AMPLIFIERS & KITS

PDA200E PDA200E 120m2 wall-mounting induction loop amplifier £177.00 n

AKM1 PDA200E 120m2 Meeting/seminar room loop kit £213.45 nc/w PDA200E amplifier, APM omni-directional mic plate

AKL1 PDA200E 120m2 Lecture room loop kit £278.38 nc/w PDA200E amplifier, AMT tie/desk mic, AML lectern mic, 2 x APJ plate

AKT1 PDA200E 120m2 TV / music lounge loop kit £267.47 nc/w PDA200E amplifier, AMH handheld mic, APS scart lead, APJ plate, APL plate

AKR1 PDA200E 120m2 Waiting room loop kit c/w PDA200E amplifier, APL plate £213.45 n

AKU1 PDA200E 120m2 Retail unit loop kit £238.45 nc/w PDA200E amplifier, AML lectern mic, APJ plate

AKW1 PDA200E 120m2 Place of worship loop kit 1 £274.90 nc/w PDA200E amplifier, AML lectern mic, APJ plate, APL plate

AKW2/L PDA200E 120m2 Place of worship loop kit 2 (lavalier mic. version) £500.60 nc/w PDA200E amplifier, AMR/LA lavalier radio mic, APQM plate, 2 x APXM plate

AKW2/H PDA200E 120m2 Place of worship loop kit 2 (handheld mic. version) £500.60 nc/w PDA200E amplifier, AMR/HA handheld radio mic, APQM plate, 2 x APXM plate

AKH1/L PDA200E 120m2 Health and fitness club loop kit (lavalier mic. version) £464.15 nc/w PDA200E amplifier, AMR/LA lavalier radio mic, APQM plate, APL plate

AKH1/H PDA200E 120m2 Health and fitness club loop kit (handheld mic. version) £464.15 nc/w PDA200E amplifier, AMR/HA handheld radio mic, APQM plate, APL plate

AKM2 PDA200E lift loop kit, for elevators £330.00 n

Please note: Loop cable is not included in the above ‘AK’ range kits. We recommend you use 1mm2 single core cable such as C-TEC’s LOOP2/W cable which is available in 100m reels (see overleaf for pricing details).

120m2 INDUCTION LOOP AMPLIFIERS & KITS

PDA200/2 200m2 free standing induction loop amplifier £288.69 n



PDA/RM 19” rack mount kit for PDA Pro-Range amplifier £25.00 n

PDA/WM Wall mount kit for PDA Pro-Range amplifier £20.05 n

PRO-RANGE (200m2 to 900m2) INDUCTION LOOP AMPLIFIERS

ML1 Mini 20m2 wall-mounting double gang induction loop amplifier £53.00 n

20m2 MINI INDUCTION LOOP AMPLIFIER

PL1/K1 Portable induction loop kit (supplied in a cardboard storage/carry case) £120.00 nIncludes PL1 amplifier c/w battery & integral microphone, plugtop charger and sticker.

PL1/K2 Portable induction loop kit with AFILS tester (supplied in a cardboard storage/carry case) £207.65 nIncludes PL1 amplifier c/w battery & integral microphone, plugtop charger, sticker, AHHM/H combined FoSmeter H magnetic field strength meter/loop listener and headphones.

PL1/K3 Portable induction loop kit (supplied in a robust plastic storage/carry case) £170.30 nIncludes PL1 amplifier c/w battery & integral microphone, plugtop charger and sticker.

PL1/K4 Portable induction loop kit with AFILS tester (supplied in a robust plastic storage/carry case) £248.65 nIncludes PL1 amplifier c/w battery & integral microphone, plugtop charger, sticker, AHHM/H combined FoSmeter H magnetic field strength meter/loop listener and headphones.

TEAR-P Spare ‘AFILS available’ sticker £1.00 n

PORTABLE INDUCTION LOOP KITS (approx. 1.2m2 coverage)

VL1/B1 12V vehicle induction loop kit £145.83 nIncludes VL1 mini-12V amplifier, AL8 cigarette lighter power connector, TX2 loop, AMT mic.

VL1/B2 24V vehicle induction loop kit £229.16 nIncludes VL1 mini-12V amplifier, AL7 power lead, 24V to 12V DC convertor, TX2 loop, AMT mic.

VEHICLE INDUCTION LOOP AMPLIFIER KITS (approx. 1.2m2 coverage)

INDUCTION LOOP EQUIPMENT


APM Omni-directional plated microphone, for wall/ceiling/desk mounting £36.45 nFor direct connection to ML1, PDA102, PDA200E, PDA Pro-Range or an outreach chain

AMT Tie/desk microphone for ML1, PDA102, PDA200E, PL1, PDA Pro-Range or APJ plate £5.20 n

AMH Handheld microphone for ML1, PDA102, PDA200E, PL1, PDA Pro-Range or APJ plate £30.95 n

AML Lectern microphone for ML1, PDA102, PDA200E, PL1, PDA Pro-Range or APJ plate £30.95 n

AMLS Lectern microphone (short stemmed version of AML) £30.95 n

AMD Desktop microphone for ML1, PDA102, PDA200E, PL1, PDA Pro-Range or APJ plate £43.33 n

AMDS Desktop microphone (short stemmed version of AMD) £43.33 n

AMD/P Desktop microphone, push to talk £120.43 n

AMP Professional handheld mic. for PDA200E or APXM outreach plate, requires AXLR lead £138.25 n

AMR/LA Lavalier radio mic. (173.8 KHz) c/w Rx, Tx, psu. for PDA200E or APQM outreach plate £214.25 n

AMR/LB Lavalier radio mic. (174.6 KHz) c/w Rx, Tx, psu. for PDA200E or APQM outreach plate £214.25 n

AMR/LC Lavalier radio mic. (175.0 KHz) c/w Rx, Tx, psu. for PDA200E or APQM outreach plate £214.25 n

AMR/HA Handheld radio mic. (173.8 KHz) c/w Rx, Tx, psu. for PDA200E or APQM outreach plate £214.25 n

AMR/HB Handheld radio mic. (174.6 KHz) c/w Rx, Tx, psu. for PDA200E or APQM outreach plate £214.25 n

AMR/HC Handheld radio mic. (175.0 KHz) c/w Rx, Tx, psu. for PDA200E or APQM outreach plate £214.25 n

PRO45 Hanging ambient microphone for PDA Pro-Range or APXM plate £188.80 n

PDA RANGE MICROPHONES

RXTI2 Induction loop test receiver requires 2 x AAA batteries & walkman type headphones £58.79 n

SWGN Sine wave generator requires 1 x PP3 battery and AL1, AL2 or AL3 connection lead £61.90 n

AHHM FoSmeter magnetic field strength meter - requires 1 x PP3 battery £92.86 n

AMSW FoSmeter+ combined sine wave generator & magnetic field strength meter £108.00 nrequires 1 x PP3 battery and AL1, AL2 or AL3 connection lead

AHHM/H FoSmeter H combined magnetic field strength meter & loop listener £70.00 nrequires 1 x PP3 battery & 32Ω headphones such as C-TEC’s HEAD1 headphones

HEAD1 32 ohm headphones for use with AHHM/H £22.20 n

AL1 3.5mm jack to 3.5mm jack lead (connects PNGN to APJ outreach plate) £7.50 n

AL2 3.5mm jack to double phono lead (connects PNGN to APL outreach plate or DL50) £7.50 n

AL3 3.5mm jack to pre-cut bare ended lead £7.50 n

INDUCTION LOOP TEST EQUIPMENT

Loop cable is included in all ML1/K, DL50/K and PDA102 range induction loop kits. For PDA200E/AK Rangekits we recommend LOOP2/W cable. For other PDA range loop amplifiers, call our technical dept. for advice.

LOOP1/W 100m x 0.5mm2 single core white loop cable (for black cable order LOOP1/B) £21.67 n




FLAT1005 100m x 0.5mm2 insulated copper tape (flat loop cable for under carpets) £97.28 n

FLAT2005 100m x 1.0 mm2 insulated copper tape (flat loop cable for under carpets) £107.58 n

FLAT3005 100m x 1.5mm2 insulated copper tape (flat loop cable for under carpets) £118.00 n

TAPE 50m white synthetic fibre tape (used to protect flat loop cable) £9.48 n

BELDEN/10 10m Belden 8723 four core screened cable for use with outreach plates £17.33 n

BELDEN/25 25m Belden 8723 four core screened cable for use with outreach plates £43.33 n

APT Loop connector plate (for the termination of induction loop cable) £36.45 n

AXLR XLR to XLR lead (used to connect AMP mic to APXM outreach plate) £12.15 n

LEST 100V line (i.e PA system output) to 0db (775mV line level) convertor £25.49 n

APPS Overspill reduction phase shifter £84.19 n

TEAR10 Pack of 10 self-adhesive ‘induction loop fitted’ stickers £9.11 n

INDUCTION LOOP CABLE & MISCELLANEOUS OTHER AFILS ANCILLARIES

CAN BE USED TO INCREASE THE NUMBER OF AUDIO INPUTS ON AN INDUCTION LOOP SYSTEM** C-TEC’s ML1, PDA102, PDA200E and PDA Pro-Range amplifiers all have Outreach connection sockets. A separate 12V PSU may be required when connecting outreach plates to other amplifiers. Plates should be wired using Belden 8723 audio cable.

APJ 3.5mm mono jack plate, for connection of AMT, AMH, AML or AMD microphones £36.45 n

APL Line level audio plate, for connection of APS SCART lead/other line level audio feeds £36.45 n

APQM 6.35mm stereo jack plate, for connection of AMR/L & AMR/H radio microphone kit £36.45 n

APQL 6.35mm stereo jack plate, for connection of line level feeds from mixing desks, etc £36.45 n

APXM XLR mic level plate, for connection of AMP microphone £36.45 n

APXL XLR line level plate, for connection of line level feeds from mixing desks, etc £36.45 n

APM Omni-directional plated microphone, for wall/ceiling/desk mounting £36.45 n

APXO 3 pin XLR balanced line output plate, connects an Outreach chain to 3rd-party equipment £56.00 n

API AFILS active indicator light £36.45 n

APS SCART to double phono lead (for use with APL plate) £5.94 n

PDA RANGE OUTREACH PLATE AUDIO INPUT EXTENSION SYSTEM


INFRARED ASSISTIVE LISTENING SYSTEMS

INFRARED ASSISTIVE LISTENING SYSTEMS

SI30 0.5W modulator/radiator, 2.3/2.8MHz £277.30 nMono/stereo operation, coverage 80m2 mono, 40m2 stereo Requires NT20-1-UK or NT20-4-UK PSU

SZI30 Slave 0.5W radiator £199.72 nCoverage 80m2 mono, 40m2 stereo; daisychain to SI30 to increase coverage Requires NT20-1-UK or NT20-4-UK PSU

NT20-1-UK 24VDC/200mA Plug in mains PSU for one SI30 or SZI30 £93.45 n

NT20-4-UK 24VDC/500mA Plug in mains PSU for up to four SI30/SZI30s (needs KKY20-015) £186.87 n

KKY20-015 4 way ‘octupus’ cable for use with NT20-4-UK £32.50 n

SZI1015-T 2W radiator/modulator, 2.3MHz £1109.12 nMono only, coverage 400m2, requires NT1015 PSU.

SZI1015 2W slave radiator £1008.87 nMono only, coverage 400m2, daisychain to SZI1015-T to increase coverageRequires NT1015 PSU

NT1015 Mains PSU for one SZI1015-T or SZI1015 £203.15 n

MODULATORS / RADIATORS

GZG1029 Swivel joint for mounting SI30 or SZI1015-T £105.82 n

GZP10 Mounting plate for wall or ceiling mounting SI30, SZI30, SZI1015-T or SZI1015 £52.82 n

IZM20 Cluster mounting kit for up to 4 rotatable SI30/SZI30s £32.50 nEach SI30/SZI30 will require a IZK20 mounting clamp

IZK20 Mounting clip for SI30 / SZI30 £18.30 n

KR20-015 0.15m IR extension cable for SI30 / SZI30 when used with IZM20 £14.22 n3.5mm mono jack to 3.5mm mono jack

KR20-7 7m IR extension cable for SI30/SZI30 £26.40 n3.5mm mono jack to 3.5mm mono jack

ATTACHMENTS / CABLES FOR MODULATORS & RADIATORS

RI150/L Infrared receiver with neck induction loop for hard of hearing, mono £194.37 nc/w BA151 rechargeable accupack

RI150 Stethoset infrared receiver for able hearing, mono £123.05 nc/w BA151 rechargeable accupack

HDI302 Professional Stethoset receiver for able hearing, mono or stereo £174.21 nc/w BA151 rechargeable accupack

BA151 Spare Rechargeable accupack for RI150/L, RI150, HDI302 £37.62 n

L151-10 Charger for up to 10 receivers (RI150/L, RI150, HDI302), needs NT92-UK PSU £334.87 n

NT92-UK 200mA plug-in mains PSU for L151-10 charger £58.92 n

RECEIVERS

• Ideal for use in areas where the installation of an audio-frequency induction loop system is impractical

• Modulators/radiators transmit sound via invisible light beams to one or more infrared receivers

• ‘Line of sight’ operation means no ‘spillover’ of the sound signal into neighbouring rooms

• Ideal for persons with mild or moderate hearing loss

• Special RI150/L ‘neck loop’ receiver converts the infrared signal into a mini-induction loop field that can be picked up by any hearing aid with a telecoil / ‘T’ position

• Receivers also available for use by the non-hearing impaired

MM1002 Six input mixing console £122.57 n

AL4 1/4” jack to XLR lead £37.14 n

PRO45 Hanging ambient microphone £188.80 n

MIXERS & MICROPHONES

DDA80 Infrared AFILS kit, 80m2 £2100.00 nIncludes: SI30 Modulator/radiator; NT 20-1-UK Power supply for SI30; KM 23200 Table Stand; IZK20 Clamp for SI30; ME 34 Cardioid mic capsule; MZH 3015 Gooseneck 15 cm; KM 29376 Table stand mic; L151-10 10 way charger; NT92 Power supply for L151-10; RI150 Mono receiver; RI150L Mono loop receiver; Carry case; Mic input modification (12V phantom power); Auto shut off modification; Mic & line input cables supplied

DDA400 Infrared AFILS kit, 400m2 £3314.00 nIncludes: SZI1015T Modulator/radiator; NT1015 Power supply for SZI1015; KM23200 Table Stand; IZK20 Clamp for SI30; ME34 Cardioid mic capsule; MZH3015 Gooseneck 15 cm; KM29376Table stand mic; L151-10 10 way charger; NT92 Power supply for L151-10; 3 x RI150 Mono receivers; 3 x RI150L Mono loop receivers; Carry case; DC modification, SZI & PSU; Mic input modification (12V phantom power); Auto shut off modification; Mic & line input cables supplied

INFRARED ASSISTIVE LISTENING AFILS KITS

DIMENSIONS


235mm

380mm90

235mm

380mm90

270mm

435mm

85

404mm

404mm110

240mm

160mm53

250mm

175mm53

290mm

465mm

85mm

235mm

380mm90

290mm

465mm

85mm

CFP/FP/MFP CONVENTIONAL FIRE PANELS

EP EXTINGUISHER PANELS & ANCILLARIES

448mm

725mm103

200mm

271mm75

267mm

325mm94

336mm

510mm133

267mm

408mm94

CFP 2-8 ZONE PANELHole required for flush mounting: W 367 x H 220 x D 75mm approx(No bezel required)

XFP 1 LOOP 16Z PANELHole required for flush mounting:W 367 x H 220 x D 75mm approx(No bezel required)

XFP 1/2 LOOP 32Z PANELHole required for flush mounting using AFP385 bezel:W 412 x H 255 x D 50 approx

EP203 PANELHole required for flush mounting:W 440 x H 277 x D 40mm approx

BF361-3/5 PSUHole required for flush mounting:W 440 x H 277 x D 40mm approx

XFP ADDRESSABLE FIRE PANELS

POWER SUPPLIES

EFP1 PANELDesigned for surface mounting only

FP2/4E PANELHole required for flush mounting using FF379 bezel: W 327 x H 271 x D 70mm approx

FP4/6/8E/FPREPEATER PANELHole required for flush mounting using FF385 bezel: W 410 x H 271 x D 70mm approx

FP8/10/12/14 PANELHole required for flush mounting using FF387 bezel: W 512 x H 340 x D 110mm approx

EP210S RSUDesigned for surfacemounting only

EP210F RSUHole required for flush mounting:W 156 x H 232 x D 51mm approx(No bezel required)

BF362-1/3/5 PSUDesigned for surfacemounting only

BF360-12/24 PSUHole required for flush mounting: W 367 x H 220 x D 75mm approx(No bezel required)

BF359/3S STAINLESS STEEL ENCLOSUREDepth of hole required for flush mounting: 93mm

MFP4/8/12/MFPREPEATER PANELHole required for flush mounting using FF385 bezel: W 410 x H 271 x D 70mm approx

MFP16/20/24/28 PANELHole required for flush mounting using FF387 bezel: W 512 x H 340 x D 110mm approx

336mm

510mm133

267mm

408mm94

5221515

20

20

372

186

652

32615

20

49.5


240mm

160mm53

250mm

175mm53

302mm

200mm123

270mm

435mm

85

462mm

600mm226

448mm

725mm193

270mm

435mm

85

180mm

397mm

92

360mm

397mm

92

450mm

450mm115

448mm

725mm103

AVAC MASTER/SLAVEHole required for semi flush mounting:W 420 x H 420 x D 45mm approx

QT601-2 CONTROLLERHole required for flush mounting using AFP385 bezel:W 412 x H 255 x D 50 approx

SigTEL DISABLED REFUGE

QUANTEC CALL SYSTEM

800 SERIES CALL SYSTEM

AVAC VOICE ALARM SYSTEM

ECU-8 CONTROLLERHole required for flush mounting using AFP385 bezel:W 412 x H 255 x D 50 approx

EVC302S OUTSTATIONDesigned for surface mounting only

EVC302F OUTSTATIONHole required for flush mounting:W 156 x H 232 x D 51mm approx(No bezel required)

BF359/1 ENCLOSUREDesigned for surface mounting only

BF359/2 ENCLOSUREHole required for flush mountingusing BF359/2B bezel: W 610 x 470 x 185mm approx

BF359/3S STAINLESS STEEL ENCLOSUREDepth of hole required for flush mounting: 93mm

BF359/3D STAINLESS STEEL ENCLOSUREDepth of hole required for flush mounting: 183mm

10-30Z INDICATOR PANELDesigned for surface mounting only

40-60Z INDICATOR PANELDesigned for surface mounting only

DIMENSIONS

NC942B 1 ZONE CONTROLLERDesigned to mount on a UK double gangback box of at least 25mm depth

NC944 4 ZONE CONTROLLERDesigned to mount on a UK double gangback box of at least 25mm depth

86mm

141mm15

86mm

141mm15

5221515

20

20

372

186

652

32615

20

49.5

5221515

20

20

372

186

652

32615

20

49.5

C-TEC, Stephens Way, Wigan, WN3 6PH United Kingdom.


C-TEC, Stephens Way, Wigan, WN3 6PH United Kingdom.


Approved Document No. DSU4002009 Rev 1

Quality System Certificate No: 176Assessed to ISO9001 : 2000

**2005 PRICE A4 singles AG - Luckins Live

Documents

Transcript of **2005 PRICE A4 singles AG - Luckins Live