2
Table of contents
Preface and warranty 3 Safety instructions 4 Operation panel 5 Settings 6-7
- Temperature 6 - Time 6 - Core temperature 6 - Programmes (new – edit – cancel) 6-7
Description of functions 8-10 - Hot air 8 - Preheating 8 - Combi steaming 1 & 2 8 - Reheating 8 - Manuel pulsing 8 - Steaming in a light programmable oven with boiler 8-9 - Exhaust 9 - Current time and date and setting of timer 9 - Fan speed 9 - CombiWash (fully automatic cleaning system) 9 - Semi-automatic cleaning 9 Programmes/recipes 10 Indicative core temperatures 11 Low-temperature and long-time roasting 12 - Long-time roasting 12 - Low-temperature roasting 12 - Shrinkage 12 - Legislation on food products 12
User menu 13-14 Cleaning 15-17 - Inside 15 - Behind filter housing 16 - Jets 16 - Outside 17 - Exhaust valve 17
- Filter under front panel 17 - Error codes 18
Recommended programmes/recipes 19-28
Dear customer,
For further information on the functions and user interface of the oven, see Service & Installation Manual.
3
Dear Customer Congratulations on the purchase of your new WHIRLPOOL oven. You are now the owner of one of the leading ovens on the market.
All WHIRLPOOL products are subjected to intensive product development, which ensures that the products always offer the latest technology and the most up-to-date and energy-saving methods of preparation. Moreover, the WHIRLPOOL products are entirely up-to-date with the latest developments/technology in terms of
• ERGONOMICS AND SAFETY • SIMPLE AND LOGICAL OPERATION • ELEGANT AND FUNCTIONAL DESIGN • RELIABILITY AND SERVICE
To ensure that our customers get an optimum and reliable product, all WHIRLPOOL units are passed through an extensive test programme in which all functions are subjected to a continuous and extreme load.
Before you start using the oven and its many automatic functions, we recommend that you study the manual thoroughly so as to ensure optimum cooking results. By going through the manual, you will obtain a better understanding of the advanced technology and feel safer while using the oven in your daily work.
Furthermore, we call your attention to the wide variety of optional extras:
• Handshower • Core temperature probe • Additional cassette rack, trolley for rack, wall bracket • Extraction hood and extraction hood with condenser • Visit www.whirlpool.com for further information on our wide range of additional equipment
Terms of warranty Provided that it has been registered on the WHIRLPOOL website, your new WHIRLPOOL oven is covered by a 48-month factory warranty. The warranty covers the oven cabinet and spare parts. Furthermore, there is a 10-year warranty on the exterior door glass. The period of warranty takes effect from the date of production. For further information on the warranty terms, please visit www.houno.com/warranty.
The warranty does not include.... We especially draw your attention to the fact that the factory warranty does not cover glass parts such as interior door glass, lamp glass and halogen lamps, nor does it cover sealings. Furthermore, the factory warranty does not apply in the case of
• defects that are due to the fact that installation has not been carried out in accordance with the WHIRLPOOL Installation & Service Manual at present in force (electricity, gas, water/drain, exhaust),
• damage resulting from accidents, including damage caused by water, transport, misapplication or negligence,
• defects and interruptions of operation that are the result of the oven not being handled/operated as specified in the user's manual.
WHIRLPOOL cannot be made liable for indirect loss, including loss of profits.
If you utilise all the technological facilities of this oven, you are guaranteed perfect results with only a minimum of resources.
4
Enjoy your new WHIRLPOOL oven. Yours sincerely, WHIRLPOOL
Safety Instructions
Ready for use…. When the oven is correctly installed, read this manual carefully before the oven comes into service. This manual should be kept handy to persons using the oven. Always place trays filled with hot liquid in the bottom runners of the oven chamber to avoid spilling the hot liquid on yourself when you take the tray out of the oven chamber. Some areas on the outside of the oven may get as hot as 60°C or more, therefore, you should only touch the front of the oven. Do not open the oven during the automatic cleaning process. Do not store flammable materials around or under the unit. When using the roll-in or trolley system, be aware of hot racks sliding out of the oven. Use the parking brakes on the wheels to prevent trolleys from rolling away on uneven floors.
5
(1) If the oven does not incorporate CombiWash, the manually operated cleaning system can
be activated by pressing the PRG key and turning the turn switch until CLEANING appears in the display.
HOT AIR 30-250°C. All modes and all optional extras are described on following pages. Preheating up to 300°C is a standard feature on models C and K.
REGENERATING / COMBI STEAMING Change between the modes by pressing REGENERATING COMBI STEAMING 1 COMBI STEAMING 2
STEAMING 30-120°C (2). Used for manual humidity pulsing in HOT AIR during preparation.
EXHAUST is open when control lamp is on. Low FAN SPEED is active when control lamp is on.
SETTING CORE TEMP. PROBE (optional extra). Press once and set with TURN SWITCH. Deactivate by turning switch past the permitted temp. range of 30-99°C.
TEMPERATURE SETTING. Press once and set temperature with TURN SWITCH. Enter by pressing symbol again.
PROGRAMMES. Press once and choose program with TURN SWITCH. Editing and deleting are described on following pages.
ON/OFF
STEP shows current step when PROGRAMME mode is active. Control lamp next to ALARM lights up when alarm after a step has been chosen (when PRG is active).
Main switch
TIME SETTING. Press once and set time with TURN SWITCH. 4 hours is maximum. Confirm by pressing TIME.
Operation panel
Turn switch
6
Setting of temperature Press TEMPERATURE key once and set temperature with turn switch. Confirm by pressing TEMPERATURE key again.
Setting of time Press TIME key. Time flashes. Choose desired time (hours and minutes) with turn switch. If switch is turned all the way down to 0,”-:--” (continuous operation) appears in the display. Max. time setting is 4 hours. Confirm by pressing TIME key again. Setting of core temperature (optional extra) Press CORE TEMPERATURE key. If the display is off, the core temperature appears as 75°C. Set core temperature between 30 and 99°C with turn switch. Core temperature is deactivated by turning switch past 30. When core temperature is chosen, time changes to ”-:--” . Confirm by pressing CORE TEMPERATURE key again. The core temperature probe has several measuring points on its tip. The computer calculates an average temperature thus ensuring that the core temperature is 100% correct. If the probe is inserted incorrectly, the advanced technology notifies you at once. The probe is inserted vertically in the thickest part of the product. When preparing products of very different sizes, you get a uniform quality by inserting the sensor in the smallest product and then moving it to a larger product when the core temperature alarm sounds. Programmes 10 programmes that can hold 3 process steps each. It is possible to write 10 characters and entering alarm after steps 1 and 2. Press PRG and turn the switch. The first five programmes are preset at the factory (P0 – P4). Start the programme by pressing the ON/OFF key. To leave PROGRAMME, turn the switch beyond ”P O”. To delete an entire programme, press core temperature key and alarm key simultaneously for 2 seconds. When the keys or the turn switch is idle for 20 seconds, the oven returns to manual operation.
Entering and changing text To enter or change text, press PRG for 3 seconds. The first digit or the relevant letter/”_” flashes alternately. Change the flashing character with the turn switch. You can choose between all the letters of the alphabet and the digits 0 – 9. The space sign is next to the letter A. Move on to the next digit by pressing PRG briefly. Store text by pressing PRG until “SAVED” appears in the display. To leave text editing without storing, press ALARM. The original text reappears. To delete the entire text, press PRG and ALARM simultaneously for 2 seconds. When a key or the turn switch is idle for 20 seconds, the oven returns to select programme.
Settings
7
Entering and changing data in steps By pressing STEP when PROGRAMME is active, the step display is turned on and shows ”1”. The data of the first step can now be entered. To move on to the next step (1-3) and read and change settings, press STEP again. Choose and change temperature, time, core temperature, exhaust and fan as in manual operation. Stop between steps: To turn the alarm between steps on and off, press ALARM. If the control lamp is on, the programme ends with the current step and a beep is heard. The oven does not proceed to the next step until the oven door is opened and closed or you press ALARM. To store a change made in the step mode, press PRG for 2 seconds. Leave STEP by choosing another programme with the turn switch. Be careful not to use the turn switch when a value flashes. If you turn the switch while you are working in STEPS, the computer switches to the next programme and all changes are lost. Delete current step by pressing STEP and ALARM simultaneously for 2 seconds. When the programme has started, you can still change time, temperature, core temperature and the settings of fan and exhaust. These changes will then only be active in the current run. Note that the display shows the total time remaining after start and that it will show the time remaining in the current step when you press TIME.
8
Description of Functions
Hot air 30-250°C The hot air operating mode can be used for roasting, grilling, baking and gratinating. We recommend that you keep the exhaust open when roasting products at very high temperatures. It is possible to roast breaded products such as breaded fish and breaded pork chops. For maximum effect, use enameled cast iron trays / silicone-coated baking sheets and one of the special browning fats available in the shops. Preheating 251-300°C By setting the temperature higher than 250°C, you change to the preheating mode and PREHEAT is shown instead of HOT AIR. With this function, you preheat the empty oven. The time can be set to max. 15 minutes, and continuous operation (-:--) is not possible. The preheating mode has been changed so that the countdown does not start until the desired temperature has been reached. This is to ensure that the oven is always in the same condition when the oven is loaded, no matter the starting temperature. IT IS RECOMMENDED TO ALWAYS PREHEAT THE OVEN BEFORE USE. Combi steaming 1 & 2 30-250°C COMBI STEAMING 1 is recommended for the roasting of all kinds of meat cuts. The pores of the meat close quickly, which prevents the juice from leaving the meat. When using long-time roasting at 80 – 130°C, COMBI STEAMING 1 helps reduce shrinkage. COMBI STEAMING 2 is recommended for roasts that should be well-done, and if you want to use the juice in the container for gravy. At temperatures higher than 170°C, the crust of the meat becomes nice and brown. A great deal of humidity is added to the oven chamber and the amount of liquid in the tray is increased during production.
Reheating/regeneration
30–180°C Regenerating is a very gentle process and therefore very suitable for reheating. Use a core temperature probe to reach the perfect end temperature. For the reheating of sous-vide products, etc., follow the recommendations of the producer as to reheating. The products should not be covered up as this impedes optimum and quick reheating. Manual humidity pulsing When you press the key for STEAMING in the HOT AIR mode, you add humidity to the oven chamber. Humidity is added for as long as the key is held down. Steaming with boiler When the steam generator is cold (< 65°C), the steaming starts with a flushing of the generator. It takes approx. 8 minutes before the oven produces steam (the change of water only takes place when the temperature in the steam generator is below 65°C). The steam generator is then hot and steam is generated immediately. General recommendations for steaming STEAMING at 100°C is recommended for all kinds of hard vegetables, rice and pasta. LOW-TEMPERATURE STEAMING at 70-80°C is recommended for the steaming of fish. FORCED STEAMING at 120°C is an aggressive and very rapid process, which should be used with care. IT IS RECOMMENDED TO LET THE OVEN PRESTEAM FOR 8 MINUTES BEFORE LOADING IT.
9
Exhaust The exhaust is usually closed in all operating modes. It is always closed in the steaming mode. When the control lamp is on, the exhaust is open. If you wish to reduce the amount of humidity in the oven chamber – when you brown, for instance – the exhaust should be open. Fan speed Set the FAN speed by pressing the fan key and turn the switch. A fan speed between 20 and 50% is recommended for the baking of puff pastry, Danish pastry, cakes and small products as well as in the Delta-T and Cook-and-Hold modes. You may add 1 – 2 minutes’ preparation time for each ½ hour when low fan speed is used. Fan speeds below 50% cannot be used at temperatures above 200°C. A fan speed between 50 and 100% are recommended if you want a particularly juicy end product and accept a longer cooking time. Hours, date and setting of timer Shows the exact time and date when the oven is off. For setting of clock and timer, see USER MENU below. Fully automatic cleaning system, CombiWash (optional extra) The cleaning system should be used every day. You choose between levels 1, 2, 3 and 4 and possibly additional detergent, depending on how soiled the oven chamber is. The last thing you do before turning off the light in the evening is activating CombiWash. When CombiWash is finished, the computer automatically switches to an energy-saving standby function. Follow these steps to start CombiWash: • Cool down the oven chamber to 80°C. • Check the level of detergent and rinse aid. • Press PRG and turn switch until CombiWash appears in the display. • Press STEP to select cleaning level: 0 is 2 minutes’ flushing with water – 1 is light cleaning
and 4 is very thorough cleaning. Press ALARM for additional detergent. • Close oven door and press ON. Steps 1 and 2 are used after steaming/roasting at low temperatures. Steps 3 and 4 are used after roasting of meat / cooking at temperatures higher than 180°C. We recommend that the oven is cleaned on a daily basis or after each production. Semi-automatic cleaning This cleaning function can also be used on ovens with CombiWash. Simply deactivate CombiWash in the user menu. • Cool down oven chamber to 60°C. • Press PRG and cleaning appears in the display. Press ON. • Press ON
10
• When the alarm sounds (after 10 minutes) and add soap appears in the display, open oven
door and spray detergent into oven chamber. Close oven door and the programme continues.
• When the programme is over, rinse oven appears in the display (after another 10 minutes).
Rinse oven chamber. If the oven is very soiled, activate combi steaming 2 at 80°C for 30 minutes before starting cleaning programme.
Programme/recipe Mode
Temp./time/misc.
Remarks
0 Fillet of beef, 4 kg, trimmed, medium
1) Hot air / preheating Alarm 2) Combi steam 1 3) Combi steam 1
200/5 180/20 60/20
Last step is ”holding time” which ensures that the meat is medium done. May be omitted.
1 Braised pork, 3-4 kg, well-done
1) Combi steam 2 2) Combi steam 1
165/60 80/45
Last step is ”holding time” which ensures perfectly roasted meat. May be omitted.
2 Neck of pork with lard, 3-4 kg, well-done
1) Steaming 2) Combi steam 1 3) Hot air
100/40 165/40 190/20/exhaust open
3 Low-temperature steaming for 5 hours, medium (max. 5 kg)
1) Combi steam 1 2) Combi steam 1 3) Hot air
80/105 60/180/low fan speed 200/15/exhaust open
Can be used for all kinds of lean cuts of veil and beef.
4 Duck roast, 3000 g
1) Hot air / pre-heating Alarm 2) Combi steam 2 3) Combi steam 1
200/5 145/40 170/30
11
Indicative core temperatures for beef, veal, pork and lamb
Cuts of saddle, tenderloin and ham 60-65°C Roast of saddle, ham 65°C Cuts of meat containing a great deal of connective tissue, such as neck, brisket and shoulder 80°C Paté 75°C Terrine 60°C Foie gras terrine 45°C A rare roast is achieved at a core temperature of 60-62°C A medium-rare roast is achieved at a core temperature of 65-67°C A roast well-done is achieved at a core temperature of 70°C (Meat with a great deal of connective tissue 80°C) The more connective tissue the meat contains, the more important is the holding time after the core temperature has been reached. During traditional roasting at temperatures higher than 150°C, the core temperature may rise by an additional 5°C during the first part of the holding time. Tender meat such as sirloin steak and trimmed fillet reaches maximum tenderness at 65°C. The meat becomes tougher between 75 and 80°C but becomes increasingly tender again as the temperature rises above that. Meat containing a great deal of connective tissue, such as shoulder, brisket and neck, needs to be heated for a long time before it is sufficiently tender – for instance, a holding time of 30 – 90 minutes at a core temperature of 65-75°C (then it is ”low-temperature tenderising” – see ”Low-temperature roasting”). For meat prepared for a buffet or for display on a sales counter, the indicative core temperature is above 75°C. The meat should be removed after 3 hours or when the core temperature falls to below 65°C. See recommendations from the Ministry of Health. Indicative core temperatures for fish Fish without bones 55°C Fish with bones 60°C Fish pâté 65°C The steaming of fish will succeed at a temperature of 65 – 80°C. The fish does not coagulate and shrinkage is reduced to a minimum.
12
Low-temperature and long-time roasting Indicative bactericidal holding times
Long-time roasting Roasting at a temperature between 110 and 150°C. Slow heating produces meat that is uniformly cooked. Low-temperature roasting Can be described as roasting below 100°C, the core temperature of the roast and the oven temperature being almost the same. The advantage of this method of preparation is that the roast is uniformly cooked. Furthermore, the slow preparation/heating process may result in the meat becoming more tender. Can be used for all types of meat and is particularly suitable for the preparation of meat with a great deal of connective tissue. With holding time at a core temperature of 65°C, it is possible to achieve additional tenderising of particularly ”tough” cuts of meat (at temperatures above 60°C, the meat starts to dehydrate).
Shrinkage during low-temperature roasting Depending on the meat, the following indicative temperatures can be used for cuts of meat that should be medium-rare or well-done: 5 hours approx. 25-30% shrinkage 10 hours approx. 35-40% shrinkage 20 hours approx. 45% shrinkage
Keeping qualities and indicative legal requirements from the Ministry of Health The keeping qualities of heated meat vary a great deal according to the way the meat is packed while stored – from a few days for small cuts of meat to several weeks for sous-vide products. The Danish legal requirements governing food hygiene state: When heated, the food product should have an overall temperature of at least 75°C, with the following exceptions: • Whole cuts of meat • Meat which the consumer does not want well-done, served in portions • Hens’ eggs served one at a time • Other kinds of food which, because of their nature, cannot be heated to at least 75°C.
Heating up food should not, however, cause any hygienic problems. Food that has been heated should either be eaten within 3 hours, kept hot at a temperature of 65°C, or cooled down to max. 5°C in the course of no more than 3 hours.
13
To enter the user menu, press ALARM for 5 seconds while you are in the manual mode. The display briefly shows ”USER MENU”. The core temperature display shows ”b” and the number of the value to be set (see below). You leave the user menu by turning the turn switch beyond ”0”.
1 Store pre-
setting Time and temperature can be changed in HOT AIR, COMBI STEAMING and STEAMING and saved by pressing ALARM. The alarm control lamp flashes when data are ready to be saved. The desired changes should be made before entering the USER MENU.
2 Timer Press STEP to change the various settings of the timer. 1) DATE. The date flashes in the temperature display. To set the date, turn switch. 0 means daily start. 2) HOUR. Set the hour. 3) MINUTE. Set the minute. 4) MODE. Choose a mode by pressing one of the four mode keys. 5) TEMPERATURE. Set the oven temperature. 6) TIME (duration of program) 0:00 - 4:00. Press ALARM to activate timer (ON appears in the temperature display and control lamp is on). Deactivate by pressing ALARM. The oven can now be turned off with the main switch or it can be left on standby. The oven starts automatically but only in the manual mode.
3 Volume low Press STEP and adjust the volume of the alarm during operation from 0 to 9.
4 Volume high Press STEP and adjust the volume of the alarm at the end of a program/mode from 1 to 9.
5 Sound frequency
Press STEP and adjust from 1 to 9.
6 Interior light Press STEP: 0 = continuously on / 5 = off after 5 min. / 1 = continuously on but off when door open / 6 = off after 5 min. but off while door open.
7 Current temperature
0 = desired temperature / 1 = current temperature. Adjust by pressing STEP.
8 Extraction Applicable only if oven has condensing extraction hood. 0 = extraction hood running independently of oven / 1 = extraction hood stops 10 minutes after oven has stopped.
9 Time graphics Shown in text display during operation. Change by pressing STEP. 0 = Display shows mode chosen 1 = Display alternately shows mode chosen and time remaining.
10 Minutes Minutes are shown in temperature display. Change by pressing temperature key and turning switch. Store by pressing temperature key again.
11 Hour Hour is shown in temperature display. See 10. 12 Day Day of the month, 1-31. Day of the week, 1 – 7, in time display. See 10.
In Europe, you can choose to have the computer switch to summer time automatically. 0 = No change, 1 = Change from/to summer time.
13 Month Month. See 10. 14 Year The year 2007 is indicated by ”7”. See 10. 15 CombiWash For ovens with the automatic cleaning system, CombiWash:
If problems occur with respect to some of the CombiWash error messages, the program can be deactivated. 0 is shown in step display. Then activate the semiautomatic cleaning program by pressing START (no wash arm required) and follow the instructions in the display.
User menu
14
16 Regenera-ting/reheating
Setting of humidity pulsing. Press temperature key and turn switch to change setting. The value indicates the number of seconds between each injection into the oven chamber. If the value is increased, less humidity is added to the oven chamber, if the value is reduced, more humidity is added (factory setting is every 8 seconds).
17 Injection interval 1
Combi steaming 1: See 16 (factory setting is every 12 seconds)
18 Injection interval 2
Combi steaming 2: See 16 (factory setting is every 5 seconds)
19 Save all Press ALARM to make a backup of all settings in all modes and programmes.
20 Retrieve all Press ALARM to retrieve all settings saved in all modes and programmes. 21 Retrieve ori-
ginal menu Press ALARM and retrieve all programmes preset by the manufacturer. In step display, choose which program (0 – 4) to retrieve and press ALARM.
22 Screen saver Interval of seconds before screen saver becomes active. 0 = 0 sec. / 1 = 10 sec. / 2 = 30 sec. / 3 = 60 sec./ 4 = 180 sec. / 5 = 600 sec. Change by pressing STEP.
23 Language Change by pressing STEP (1 – 4). 24 SW update Updating of software. Special memory key required. Contact your local
distributor.
15
Daily cleaning of the oven is recommended for hygienic reasons and to avoid interruptions of operation. The design of the WHIRLPOOL ovens allows quick and easy cleaning. The oven chamber is made of all-welded stainless steel, which makes it splash proof. You will therefore find the easy-to-use handshower (optional extra), which is located under the front panel, very suitable for interior cleaning. The door sealing is easy to remove, which ensures quick and efficient cleaning under and around it. Furthermore, the flat front panel makes exterior cleaning simple and efficient. To give the oven an extra shine, we recommend WHIRLPOOL steel oil which is available from your oven supplier (0.5 litre: part No. 045650 – 5 litres: part No. 045654). Oven chamber Use CombiWash, level 1-4 (note that CombiWash should be ordered as optional extra together with the oven as it cannot be retrofitted) or the semi-automatic cleaning program (see Description of functions), or do as follows: A. Always clean in a cold oven or cool the oven chamber down to below 80°C. B. Let the oven run in COMBI STEAMING 2 at 80°C for 15 minutes. C. Apply WHIRLPOOL oven detergent to the sides of the oven chamber, racks, etc. (according
to requirement) using a soft brush or a spray pistol. Protect your face and hands as the detergent may cause irritation should it come into contact with your skin.
D. Let the detergent work for 10 minutes. E. Let the oven run in COMBI STEAMING 2 at 80°C for 15 minutes. F. Rinse the oven chamber with water (using a soft brush or the handshower (optional
extra)). G. If the oven is not connected to a soft-water plant, we recommend that you use
WHIRLPOOL rinse aid and wipe the oven chamber with a dry cloth. Cleaning behind filter housing For thorough cleaning of the oven chamber, move the filter housing so that it becomes possible to clean round the fan and heating elements. Loosen the 2 screws (A) and (B) on the filter housing, turn the filter housing and clean behind it. The filter housing can be dismounted entirely by lifting it upwards till it is clear of the pin at the bottom and then tipping it.
Cleaning
16
Cleaning of jet heads The jet head should be dismounted and cleaned regularly according to how often the combi steaming and ClimaOptima modes are used. The easiest way to clean the jet head is to let it soak in scale remover according to requirement. All ovens are supplied with an additional jet head. If the oven is equipped with the automatic cleaning system, CombiWash, there will be two jet heads. The other jet head will be located to the right of or above the first one. This jet head should also be checked/cleaned regularly. Please note the position of the jet heads:
Exterior cleaning Wash the oven cabinet on the outside with soapy water and dry with a soft and damp cloth. After drying, apply WHIRLPOOL STEEL OIL (follow directions on the packaging). The steel oil is available from your oven supplier (0.5 litre: part No. 045650 – 5 litres: part No. 045654) and is only for external use. Note! The exterior of the oven must never be flushed with a water hose or high-pressure cleaner as this may damage the electronic components.
The jet head for steam / ClimaOptima should be located with the notch facing downwards (the long tube).
The jet head for CombiWash should be located with the notch facing upwards (the short tube).
(A)
(B)
17
Filter Under the front panel is a filter that should be cleaned on a weekly basis – either manually or automatically. Remember to fit the filter again after cleaning to prevent dirt, soil, etc. from entering the oven.
18
Error Codes
Error code 3: Generator too hot (Generator thermoswitch has tripped. Reconnect by pressing button under oven.)
Error code 4: Oven too hot (Oven chamber thermoswitch has tripped. Reconnect by pressing button under oven.)
Error code 5: Fan too hot (Thermoswitch in motor has tripped. Wait for 10 minutes and try again.
Error code 6: Drain too hot (Drain temperature has been above 75°C for more than 5 min. Check that jet in drain is working.)
Error code 7: Oven sensor defective (Temperature sensor in oven chamber not working properly.)
Error code 8: Core temp. probe not connected (A program using core temp. probe has been selected but probe has not been connected.)
Error code 9: Generator sensor defective (Temperature sensor in generator not working.)
Error code 10: Drain sensor defective (Sensor in drain not working. Oven can still be used.)
Error code 11: Water shortage (Steam generator was not filled within two minutes. Check that the water has been turned on.)
Error code 12: SSR too hot (Solid-state relay too hot.)
Error code 13: Generator too hot (Temperature in steam generator higher than 130°C. If fault recurs, descale generator)
Error code 14: Fan running too slow
Error code 15: CPU board too hot (> 60°C)
Error code 16: IO board too hot (> 60°C)
Error code 18: Error in set-up data
Error code 19: Wrong language
Error code 20: Internal defect (Failure in communication between computer and IO board.)
Error code 22: Restart not possible (Oven has been without power too long.)
Error code 23: Oven too hot at CombiWash start-up
Error code 24: Draining failure (Drain blocked or failure of drain pump. Water level in generator still high after 10 seconds of draining.)
Error code 25: Core temperature probe defective (1, 2 or 3 of the elements in the core temperature probe defective.)
Error code 28: Configuration error in main alarms (3, 4, 5, 12) (warning)
Error code 29: Wrong door sensor signal (warning)
Error code 34: Water pressure too low (Check that water is turned on.)
Error code 40: Temperature in IO board critical (Warning after program run.)
Error code 43: Wrong software version (Visual Cooking I oven)
Error code 44: Failure during initialisation of exhaust at oven start-up
Error code 45: 24 V missing or failure of main contactor output
19
Recommended Programmes
ClimaOptima 0% Hot air with exhaust open
ClimaOptima 30 – 60% Combi 1 ClimaOptima 70 – 90% Combi 2 ClimaOptima 100% Combi 3
The following recipes are for ovens equipped with the modes ClimaOptima and Steaming. To the right is a conversion table which enables you to use the recipes in all WHIRLPOOL ovens. Steaming Combi 3 Note: Most programmes have a PREHEATING OR PRESTEAMING mode followed by STOP. This means that the products should not be loaded into the oven until this step is completed. Find program – press start – wait for alarm signal – open door – load oven – insert multipoint core temperature probe, if any – close door. The program continues automatically. *(This value refers to the estimated amount of humidity that the products give off during the below programmes)
Veal & Beef
Mode %
°C
Min.
CT
Remarks
1 Preheating - Alarm 250 1 Tournedos, medium
2 Hot air / exhaust open
250 57
Apply special browning fat to meat and tray. Use baking sheets, grilling sheets, enameled iron sheets *20%
1 Preheating - Alarm 160 2
2 ClimaOptima 60 135 20
3 ClimaOptima 20 150 57
Fillet with flank, 4-6 kg, medium
4 Hot air 185 62
*50%
1 Preheating - Alarm 210 2 Tenderloin, roasted whole, 1½-3 kg, medium
3 ClimaOptima 30 185 60
Salting 5-10 g per kg, 6-24 hrs before roasting reduces shrink-age by an additional 2-3%
*30%
1 Preheating - Alarm 250 1 Roasted cuts of meat, medium 2 Hot air / exhaust
open 250 59
Salting 5-10 g per kg, 6-24 hrs before roastig reduces shrink-age by an additional 2-3%
*30%
1 Preheating - Alarm 160 2
2 ClimaOptima 70 135 65
Braising, 3-6 kg, well-done
3 ClimaOptima 40 165 75
*60%
1 Preheating - Alarm 140 2
2 ClimaOptima 80 110 20
3 ClimaOptima 40 135 50
4 ClimaOptima 20 165 70
Joint of beef or veal, 3-6 kg, with lard, well-done
5 Hot air / exhaust open
195 15
*50%
1 ClimaOptima 100 110 30 2 ClimaOptima 30 80 180 3 ClimaOptima 30 70 370
Long-time roasting, 10 hours, Meat with lard and fat, well-done 4 ClimaOptima 0 220 20
*50%
20
Long-time roasting, 10 hours, trimmed meat, medium
1 ClimaOptima 40 100 30 *50%
1 Preheating - Alarm 180 2 2 ClimaOptima 60 165 60
Braised knuckle of veal
3 ClimaOptima 20 100 70
*60%
1 Preheating - Alarm 160 2 Roastbeef, 2-5 kg, medium 2 ClimaOptima 30 135 57
Salting 5-10 g per kg, 6-24 hrs before roasting reduces shrink-age by an additional 2-3%. *40%
1 Preheating - Alarm 180 2
2 Hot air 150 50
Sirloin in puff pastry
3 Hot air / exhaust open
180 60
*50%
1 Steaming 100 8
2 Steaming 100 80
Steamed brisket of veal and beef, 1–4 kg, well-done 3 Steaming 80 45
*60%
1 ClimaOptima 30 145 85 Lasagne
2 ClimaOptima 0 185 10
*60%
1 ClimaOptima 40 165 80 Minced meat dishes
2 ClimaOptima 0 185 10
*60%
1 ClimaOptima 30 80 75 Pâté in tins of 1000 g each
2 ClimaOptima 0 100 10
*60%
Pork
Mode %
°C
Min.
CT
Remarks
1 ClimaOptima 100 100 30
2 ClimaOptima 60 165 78
Neck of pork and rib roast with lard, 2-5 kg, well-done 3 Hot air / exhaust
open 195 20
*50%
1 Preheating - Alarm 175 2 Roasted saddle of pork, 2-5 kg 2 ClimaOptima 30 165 75
*40%
1 Preheating - Alarm 195 2
2 ClimaOptima 30 165 78
Neck of pork without lard, 2-4 kg, well-done
3 ClimaOptima 20 70 45
*50%
1 Steaming 100 8
2 Steaming 100 120
3 ClimaOptima 60 135 75
Ham with knuckle, 8-10 kg, well-done
4 ClimaOptima 20 185 20
*50%
1 Preheating - Alarm 185 2 Ham roast without lard, 2-3 kg, well-done 2 ClimaOptima 60 165 85
*30%
1 Preheating - Alarm 250 1 Roasting of pork chops, 140-200 g 2 Hot air 225 16
Add special browning fat to meat and tray. Use silicone-coated baking sheets, enameled cast iron trays or specially designed grilling trays. *30%
1 Presteaming - Alarm 100 8 Spareribs, basic preparation 2 Steaming 100 45
Season/marinate
21
1 Preheating - Alarm 200 2 Spareribs, finishing (presteamed, marinated)
2 ClimaOptima 65 170 30
*30%
1 Preheating - Alarm 160 2 2 ClimaOptima 60 135 65
Braising, 2-3 kg, well-done
3 ClimaOptima 70 165 80
*60%
1 ClimaOptima 60 100 240
2 ClimaOptima 20 70 210
Suckling pig roasted whole, 20-23 kg, well-done 3 Hot air / exhaust
open 250 30
Use WHIRLPOOL rack for suckling pig which is available for model sizes 1.16 and 1.20. *40%
Delta-T roasting
Mode %
°C
Min.
CT
Remarks
1 Preheating - Alarm 210 2 2 ClimaOptima 20 185 10 3 Cooling 40 4 ClimaOptima Delta-T 30 62
Delta-T, medium
5 Hot air / low fan speed / Cook & Hold
60
1 Preheating - Alarm 210 2 2 ClimaOptima 20 185 10 3 Cooling 40 4 ClimaOptima Delta-T 30 80
Delta-T, well-done
5 Hot air / low-fan speed / Cook & Hold
60
For whole roasts. Perfect program for production during the night. The meat is kept hot indefinitely at the last stage (Co&Ho). Recommended time of preparation before last stage is 60/90 minutes (medium/ well done). Optimum tenderness of the meat is achieved. Shrinkage is reduced by approx. 10-15 % as compared to traditional roasting methods. The meat can be taken directly from the oven.
Poultry
Mode %
°C
Min.
CT
Remarks
1 Preheating - Alarm 210 2
2 ClimaOptima 60 180 10
3 ClimaOptima 40 190 15
Chicken, 1000 g
4 ClimaOptima 0 205 7
*60%
1 Preheating - Alarm 190 2 *60%
2 ClimaOptima 60 165 30
Chicken, 1400 g
3 Hot air / exhaust open
0 190 10
1 Preheating - Alarm 190 2 *60%
2 ClimaOptima 60 165 30
Chicken, 1700 g
3 ClimaOptima 0 190 10
1 Cooling - Alarm 55 Foie gras terrine 2 Hot air / low fan 65 45 1 Preheating - Alarm 180 2 *60% Chicken pie, 1000 g, in
tin 2 ClimaOptima 60 160 75
1 Preheating - Alarm 185 2 *50% 2 ClimaOptima 50 145 80
Duck roast, 3000 g
3 ClimaOptima 25 170 30
22
Fish
Mode %
°C
Min.
CT
Remarks
1 Presteaming - Alarm 70 8 Steamed fish, 60-130 g
2 Steaming 70 60
1 Preheating - Alarm 100 2 Fish terrine
2 ClimaOptima 60 120 65
*70%
1 Preheating - Alarm 250 2 Roasted plaice, breaded 2 ClimaOptima 0 225 16
Apply special browning fat to fish/tray. Use silicone-coated baking sheets, enameled cast iron trays or specially designed grilling trays.
1 Presteaming - Alarm 70 8 Steamed salmon, whole fillet, 1-3 kg 2 Steaming 70 60
Use flat trays and baking paper. Place fish on skin side. After steaming, remove skin and carefully remove dark fat from the back of the fish with a spoon.
1 Preheating - Alarm 250 2 Grilled fish, 80 g
2 Hot air / exhaust open
225 7
*20%
Vegetables
Mode %
°C
Min.
CT
Remarks
1 Presteaming - Alarm 100 8 Steamed potatoes, 70-120 g 2 Steaming 100 40 98
Max. 8-9 kg, perforated container
Baked potatoes 1 ClimaOptima 60 165 98 *60%
1 Preheating - Alarm 180 2 *60% Cream potatoes
2 ClimaOptima 50 150 65
1 Preheating - Alarm 250 2 French fries, Farmfrites Superfarm Service+ (9x9 mm)
2 ClimaOptima 20 230 7
1 Preheating - Alarm 250 2 French fries, Farmfrites Superfarm Service+ (7x7 mm)
2 ClimaOptima 20 230 5
Use special GN wire basket. Tip: Shake the basket 1 time during the preparation process.
*20% 1 Presteaming - Alarm 100 8 Steamed rice
(parboiled) 2 Steaming 100 25 Use deep GN container and flat GN container as cover.
1 Presteaming - Alarm 100 8 Danish rice porridge
2 Steaming 100 105
Add sugar, salt and perhaps other spices and stir before adding milk. Use flat GN container as cover. 2 kg rice per 90 mm GN.
23
Bread & Pastry
Mode %
°C
Min.
CT
Remarks
1 Preheating - Alarm 210 2
2 Hot air 175 13
Danish pastry, 85-100 g, bake-off
3 Hot air / exhaust open
180 5
The distance between the sheets should be 130 mm equalling the distance between every other runner.
*40%
1 Preheating - Alarm 180 2 Danish pastry, mini, 40-75 g, bake-off 2 Hot air / exhaust
open 170 18
The distance between the sheets should be 130 mm equalling the distance between every other runner.
*40%
1 Preheating - Alarm 220 2 Prebaked bread, 500-700 g, bake-off 2 Hot air / exhaust
open 180 11
*30%
1 Preheating - Alarm 230 2 *20% Baquettes, 250 g, bake-off 2 Hot air 180 9
1 Preheating - Alarm 190 2 *40% Prebaked rye bread, 1100 g, bake-off 2 Hot air / exhaust
open 160 25
1 Proving 32 45
2 Hot air / low fan speed
185 24
Semi-automatic bread program
3 Hot air / exhaust open
185 10
1 Preheating - Alarm 240 2 *40%
2 Hot air / low fan speed
180 10
Bread, 60 g
3 Hot air / exhaust open
180 5
1 Preheating - Alarm 230 2
2 Hot air 180 24
Bread, 4-600 g
3 Hot air / exhaust open
200 4
*30%
1 Preheating - Alarm 190 2 Puff pastry
2 Hot air / exhaust open and low fan speed
160 20
*50%
Desserts
Mode %
°C
Min.
CT
Remarks
1 Cooling - Alarm 75 Crème brulée, in portions of 1½ dl 2 Hot air / low fan
speed 75 80
1 Preheating - Alarm 100 2 Meringue
2 Hot air / exhaust open and low fan speed
95 80
1 Preheating - Alarm 220 2 Genoise 2 Hot air / low fan
speed / exhaust open
*30%
24
Shellfish
Mode %
°C
Min.
CT
Remarks
1 Steaming - Alarm 100 8 Lobster, approx. 1.2 kg, steamed 2 Steaming 100 15
Cooking time: Approx. 1 min. / 100 g + 3 min.
1 Steaming - Alarm 100 8 Mussels, steamed
2 Steaming 100 15
1 Steaming - Alarm 100 8 Prawns, steamed
2 Steaming 100 10
Game
Mode %
°C
Min.
CT
Remarks
1 Preheating - Alarm 190 2 Fillet of venison, trimmed, 1-2 kg, medium
2 ClimaOptima 20 180 59
*30%
1 Preheating - Alarm 190 2
2 ClimaOptima 40 160 10
Saddle of venison, larded, 3-5 kg, medium
3 ClimaOptima 60 165 57
*50%
1 Preheating - Alarm 190 2 Haunch of venison
2 ClimaOptima 60 165 57
*50%
Lamb
Mode %
°C
Min.
CT
Remarks
1 Preheating - Alarm 190 2 Leg of lamb, boneless, medium 2 ClimaOptima 60 165 57
*50%
1 Preheating - Alarm 180 2
2 ClimaOptima 60 150 55
Stuffed venison of lamb (boneless), medium
3 ClimaOptima 0 185 60
*50%
1 Preheating - Alarm 180 2 Fillet of lamb, trimmed, medium 2 ClimaOptima 20 180 59
*30%
25
Baking Recommended values
Product Operating mode
Processing time in minutes
Temperature °C
Remarks and tips
Rolls* Hot air
15-20
170-180 Manual humidity for the first 10 sec., 40-50 g/ea.
Loaves* Hot air
25-35
160-180 Manual humidity for the first 10 sec., 650 g/ea.
Buns* Hot air
15-20
160-170 Manual humidity for the first 15 sec., 40 g/ea.
Baguettes, prebaked
Hot air, possibly exhaust open
10-12 / 2-4
170-180 No humidity pulsing
French loaves/ baguettes
Hot air, possibly exhaust open
15-20 / 2-5
170-180
Manual humidity for the first 10-20 sec.
Danish pastry** Hot air, possibly exhaust open
10-50 / 5-7
170-180 Different sizes
Marble cake Hot air 50-70
160-170 In a baking tin
Madeira cake Hot air 50-80
150-160 In a baking tin
Vanilla biscuits Hot air 7-10
160-170
Puff pastry Hot air 20-25 160-180 ½ fan speed
Chou (cream puff)
Hot air 20-30 160-180 ½ fan speed
Almond cake Hot air 8-12 170
Meringue Hot air, possibly exhaust open
120-140 80 ½ fan speed
*) Dough products that are not preproved/prebaked by the manufacturer should prove/rise for approx. 15 - 40 min. depending on the product. Frozen products should be defrosted to +5°C before proving.
**) Danish pastry products based on bread dough should prove for 15-20 min., whereas certain bake-off products can be baked directly from the freezer. Frozen dough products should defrost longer.
26
Vegetables Recommended values
Product
Operating mode
Processing time in minutes
Temperature °C
Remarks and tips
Potatoes
Steaming/100% ClimaOptima/ Combi 3
30-40
100
Fresh. Different sorts of potatoes require different steaming times.
Potatoes Hot air + exhaust open 15 100 Pre-boiled
Fried potatoes Steaming/100% ClimaOptima/
Combi 3
15
230
Pre-boiled and sliced - add oil
Baked potatoes Steaming/100% ClimaOptima/
Combi 3
60
185
Carrots
Steaming/100% ClimaOptima/ Combi 3
25
100 Fresh, whole, medium-sized
Small carrots
Steaming/100% ClimaOptima/ Combi 3
18
100
Deep-frozen, add spices while frozen
Cauliflower
Steaming/100% ClimaOptima/ Combi 3
20
100
Stalks, fresh
Broccoli
Steaming/100% ClimaOptima/ Combi 3
15
100
Fresh
Broccoli
Steaming/100% ClimaOptima/ Combi 3
18
100
Deep-frozen
Broccoli
Steaming/100% ClimaOptima/ Combi 3
2-3
100
Blanching
Beans
Steaming/100% ClimaOptima/ Combi 3
10
100
Deep-frozen
Brussels sprouts Steaming/100% ClimaOptima/
Combi 3
20
100
Frozen
Spinach
Steaming/100% ClimaOptima/ Combi 3
8
100
Fresh
Celery
Steaming/100% ClimaOptima/ Combi 3
20
100
Deep-frozen, add spices while frozen
Leeks
Steaming/100% ClimaOptima/ Combi 3
15
100
Fresh
Rice
Steaming/100% ClimaOptima/ Combi 3
30
100
Parboiled. 1 part of rice to 1½ part of cold water
Pasta
Steaming/100% ClimaOptima/ Combi 3
25
100
Pour pasta into cold water. 1 part of paste to 1½ part of water*
Eggs
Steaming/100% ClimaOptima/ Combi 3
8
100
Soft-boiled, perhaps stacked in egg trays
Eggs
Steaming/100% ClimaOptima/ Combi 3
12
100
Hard-boiled, perhaps stacked in egg trays
* The steaming time is reduced if preheated water is used.
27
Meat Courses Recommended values
Products
Operating mode
Processing time in minutes
Temperature °C
Remarks and tips
Beef tenderloin
Hot air + Combi 1 or
ClimaOptima 20-40%
5 / 15 200 / 140
Fresh, whole fillet of beef. Add spices before cooking
Roastbeef Hot air + Combi
or ClimaOptima 40%
20 / 25 180 / 140
Add spices before cooking
Joint of beef
Steaming + Combi 2 + Hot air or
ClimaOptima 100% + ClimaOptima 50%
15-20 / 70-90 /
20-25 100 / 140-150
Well-hung
Roast veal
Steaming + Combi 2 + Hot air Or
ClimaOptima 100% + ClimaOptima 50%
10-15 / 60-70 /
15-20 160-190
Add spices and lard before cooking
Roast pork
Steaming + Combi 2 + Hot air or
ClimaOptima 100% + ClimaOptima 30%
10 / 60 / 25 100 / 180 /
190 Neck with lard. Add spices before cooking
Pork chops
Hot air + exhaust open 15 225
Fresh
Schnitzel
Hot air + exhaust open 15 225
Fresh
Meat balls
Combi 1 / ClimaOptima 50% 15 165
Pre-fried in pan, 75 g
Minced-meat dishes
Steaming + Combi 1 + Combi 1 or
ClimaOptima 60% in all steps
10 / 45 / 20
100 / 160 / 175
Approx. 2 kg in aluminium tin
Liver pâté Hot air + exhaust open
45 170
250 g and 500 g aluminium tins placed in water bath
Cured saddle of pork
Combi 1 or ClimaOptima 60%
50-60 180
Smoked ham
Combi 1 or ClimaOptima 60% 80 175
Apply mustard + clayed sugar
Ham in puff pastry
Hot air or ClimaOptima 20%
15 / 90 160 / 180
Exhaust open or closed
Pickled neck Steaming / Combi 3 / ClimaOptima 100%
60 100 Fresh, without bones
Liver
Hot air or ClimaOptima 20%
6 / 6 235 Fresh, sliced - add oil
Gratin Combi 1-2
or ClimaOptima 60%
45 185
Frankfurter Steaming / Combi 3 / 100% /
ClimaOptima 18 80
Omelette
Hot air + exhaust open 30 Apply fat to container
28
Poultry, Fish and Game Recommended values
Product
Operation mode
Processing time in minutes
Temperature °C
Remarks and tips
Chicken
Combi 1 + Hot air w. exhaust open or
ClimaOptima 60% + ClimaOptima 0%
20-25 / 10-15 160 / 185
Fresh, defrosted, 1000 g
Chicken
Combi 1 + Hot air w. exhaust open or
ClimaOptima 60% + ClimaOptima 0%
35-45 / 10-15 180 / 220 Frozen, 800 g
Chicken legs
Combi 1 + Hot air w. exhaust open or
ClimaOptima 60% + ClimaOptima 0%
15 / 5 160 / 185 Fresh, defrosted
Duck
Combi 1 + Hot air w. exhaust open or
ClimaOptima 60% + ClimaOptima 0%
50-60 / 50-60 170-180 Fresh or defrosted, 3000 g
Goose
Combi 1 + Hot air w. exhaust open or
ClimaOptima 60% + ClimaOptima 0%
90-120 / 15-20 160-185 Fresh or defrosted
Turkey
Combi 1 + Hot air w. exhaust open or
ClimaOptima 60% + ClimaOptima 0%
80-100 / 10-20
160-185 4000 g, perhaps
covered with lard
Flatfish
Hot air 12-18 175-185 Fresh, cover with oil
Greenland Halibut
Steaming / Combi 3 / ClimaOptima 100%
10-20 70-75 Fresh
Trout Steaming / Combi 3 / ClimaOptima 100%
10-15
70-75
Fresh
Turbot Steaming / Combi 3 / ClimaOptima 100%
8-12
70-75
Fresh
Cod Steaming / Combi 3 / ClimaOptima 100% 12-18 70-75 Fresh
Mussels Steaming / Combi 3 / ClimaOptima 100% 15-20 75-80 Fresh
Saddle of venison
Combi 1 or ClimaOptima 50% 25-23 180-200
Fresh, possibly cov-ered with lard or oil
Haunch of venison
Steaming + Hot air + Combi 1 or ClimaOptima 100% + ClimaOptima 50%
15 / 20 / 30-40 170-180 Fresh, possibly covered with lard or oil
Leg of lamb Steaming + Combi 1 + Hot air or
ClimaOptima 100% + ClimaOptima 50%
20 / 25 / 30-40 170-180 /
140-160 / 160 Without bones, add spices
Meat loaf Combi 1
or ClimaOptima 60%
15-20 220 Fresh, add spices
Vacuum-packed meat/poultry
Steaming / Combi 3 / ClimaOptima 100%
10-15 70-85 Without bones