Equipment Model Firmware Course Version Date
XVR8816S V3.218.0000.0.R.20170613 V1.0 2017/11/30
How to set startup wizard?
Page1Copyright © 2017 Dahua Technologies Co., Ltd. All rights reserved.
· How to set startup wizard?
① Tick the box before “Startup”, system goes to startup wizard again when the device boots
up the next time.
② Click “Next” button to carry out startup wizard process.
1
2
Login General Network P2P Encode Schedule
Enable/Disable Wizard
Registration Storage
Page2Copyright © 2017 Dahua Technologies Co., Ltd. All rights reserved.
· How to set startup wizard?
① Click the drop-down triangle in the red circle, choose a user name to login.
② Click “OK” after entering user name and password.
2
1
Login General Network P2P Encode Schedule
Enable/Disable Wizard
Registration Storage
Page3Copyright © 2017 Dahua Technologies Co., Ltd. All rights reserved.
① Select the suitable video standard from red box, PAL
or NTSC according to different district.
② Choose working mode when HDD is full, stop
recording->the system stops recording, overwrite-
>then system overwrites the previous files.
③ Tick or not in the box to decide whether to enable
navigation bar.
④ Click “Apply” to save the configurations on this page .
⑤ Click “Next”.
· How to set startup wizard?
12
3
54
Login General Network P2P Encode Schedule
Enable/Disable Wizard
Registration Storage
Page4Copyright © 2017 Dahua Technologies Co., Ltd. All rights reserved.
· How to set startup wizard?
NetworkLogin General P2P Encode Schedule
① There are three types: YYYYY-MM-DD, MM-DD-YYYYY
or DD-MM-YYYY.
② Select correct time offset according to different district.
③ Set DST time and date, tick in the box to enable the
function.
④ Set NTP server information, tick in the box to enable
the function.
⑤ Click “Apply” to save the configurations on this page .
⑥ Click “Next”.
1
23
4
56
Enable/Disable Wizard
Registration Storage
Page5Copyright © 2017 Dahua Technologies Co., Ltd. All rights reserved.
· How to set startup wizard?
NetworkLogin General P2P
① Select the mode to set IP.
• Static->manually sets IP address, subnet mask and
gateway.
• DHCP->automatically search for IP.
② Enter correct IP address, subnet mask and gateway,
make sure IP address and gateway are in the same
segment.
③ Click “Test” to check if IP address connects default
gateway.
④ Maximum transmission unit.
• Default values Ethernet: 1500; PPPOE: 1492; DHCP: 1468.
⑤ Click “Next”.
12 3
4
5
Encode Schedule
Enable/Disable Wizard
Registration Storage
Page6Copyright © 2017 Dahua Technologies Co., Ltd. All rights reserved.
· How to set startup wizard?
NetworkLogin General P2P
① Tick in the box to enable P2P function, when the
status shows “Online”, users can get access to the
device via cell phone clients.
② Scan the first QR code by cell phone to download
client. Scan the device SN to access and manage the
device.
③ Click “Next”.
1
2
3
Encode Schedule
Enable/Disable Wizard
Registration Storage
Page7Copyright © 2017 Dahua Technologies Co., Ltd. All rights reserved.
· How to set startup wizard?
NetworkLogin General P2P
You can only see the registration interface if you have set
IP channel. The DVR supports ONVIF standard protocol.
① The devices connected by network is here.
② Click “Add” to add the remote device.
2
1
Encode Schedule
Enable/Disable Wizard
Registration Storage
Page8Copyright © 2017 Dahua Technologies Co., Ltd. All rights reserved.
· How to set startup wizard?
NetworkLogin General P2P
For the uninitialized device, we can set the initial
password for them.
① Check “Uninitialized”, and we can see all the
uninitialized device in the list.
② Check the device to initialize it.
③ Click “Initialize” button to set the password and email
for the camera.
Encode Schedule
Enable/Disable Wizard
Registration Storage
12
3
Page9Copyright © 2017 Dahua Technologies Co., Ltd. All rights reserved.
· How to set startup wizard?
NetworkLogin General P2P
① Check the box to set the camera password the same
as the recorder.
Encode Schedule
Enable/Disable Wizard
Registration Storage
1
Page10Copyright © 2017 Dahua Technologies Co., Ltd. All rights reserved.
· How to set startup wizard?
NetworkLogin General P2P
① Check the box to set the camera password the same
as the recorder.
Encode Schedule
Enable/Disable Wizard
Registration Storage
1
② Otherwise to set a new password and email.
2
Page11Copyright © 2017 Dahua Technologies Co., Ltd. All rights reserved.
· How to set startup wizard?
NetworkLogin General P2P
① Modify the camera IP address.
② Click ”Next”.
Encode Schedule
Enable/Disable Wizard
Registration Storage
1
2
Page12Copyright © 2017 Dahua Technologies Co., Ltd. All rights reserved.
· How to set startup wizard?
NetworkLogin General P2P
① “Finished” to finish the device initialization.
Encode Schedule
Enable/Disable Wizard
Registration Storage
1
Page13Copyright © 2017 Dahua Technologies Co., Ltd. All rights reserved.
· How to set startup wizard?
NetworkLogin General P2P
① Scaled video coding, enable the function to guarantee
video quality and transmission fluency.
② Select record type: regular, MD(motion detection) and
alarm.
③ Set sub-stream parameters.
④ Select bit rate type: CBR(constant bit rate),
VBR(variable bit rate). When choosing VBR, users can
set video quality ranging from 1 to 6.
⑤ Click “Apply” to save the configurations on this page .
⑥ Click “Next”.
12 3
4
56
Encode Schedule
Enable/Disable Wizard
Registration Storage
Page14Copyright © 2017 Dahua Technologies Co., Ltd. All rights reserved.
· How to set startup wizard?
NetworkLogin General P2P
① HDD full: It is to select working mode when hard disk
is full. There are two options: stop recording or rewrite.
② Package Mode: There are two ways for you to set:
Time Length or File Length.
③ Auto Delete Old Files: Never or Customized.
Encode Schedule
Enable/Disable Wizard
Registration Storage
123
Page15Copyright © 2017 Dahua Technologies Co., Ltd. All rights reserved.
· How to set startup wizard?
NetworkLogin General P2P
① Select a specific channel to set schedule or just select
“All”.
② Enable redundancy backup, the function is activated
when there are more than 1 HDD.
③ Click the gear symbol to proceed period setup.
④ Click “Apply” to save the configurations on this
page .(Detailed setup will be introduced in later
section)
⑤ Click “Finished” to finish startup wizard.
1 2
3
45
Encode Schedule
Enable/Disable Wizard
Registration Storage
Page16Copyright © 2017 Dahua Technologies Co., Ltd. All rights reserved.
· How to set startup wizard?
NetworkLogin General P2P
Notes: All the functions mentioned above can be
set later if missed.
Right click at the interface after startup, choose “main
menu” to call out the main menu.
Follow the path: SETTINGS->SYSTEM->general, tick or
not in the red box to enable/disable startup wizard
after the device booting up.
Encode Schedule
Enable/Disable Wizard
Registration Storage
Top Related