Vehicle automatic transmission II. Project Entity - Assolombarda

No.1 Vehicle Automatic Transmission

I. Project Title: Vehicle automatic transmission

II. Project Entity: South East (Fujian) Motor Co. ,Ltd. III. Project Managers: Chen Hong Tel: 13859083100

Fax: 0591-22771151 Email: [email protected] IV. Justification of the Project and Construction Conditions:

As the most important vehicle capacity base of MMC, SEM has achieved an annual capacity of 150,000 units. Taking advantage of industry cluster, SEM aims at attracting foreign investment and know-how to improve the competitiveness of SEM. Over 40 accessory suppliers with leading technology are around the SEM and set up a professional motor industrial base. Landscape is 833,034m2, and Recruitment is more than 3,200. With regard to product strategy, SEM has adopted multi-brand strategy for development. At present, SEM holds four brands, i.e., SOUEAST, MITSUBISHI, CHRYSLER and DODGE, and has a line-up of 9 series models, i.e., DELICA, RREECA, LIONCEL, VERICA, NEW SPACE WAGON, LANCER, GALANT, GRAND VOYAGOR and DODGE CARAVAN. Product recourses: Mitsubishi Motor Corporation, SEM self-directed research, the U.S.A Chrysler and China Motor Corporation of Taiwan Yulong Group. The authority of MMC has clearly declared that SEM can make a self-directed selection of its needed products from MMC, can launch the products with MMC synchronously and put into the world market by itself. To sum up, MMC will fully support SEM’s development into one of top ten automakers in China.

V. Visiting purpose: 1. Looking for the vehicle automatic transmission suppliers. 2. Looking for cooperation partners setting up automatic transmission factories in China to meet our needs.

VI. Importing conditions: The automatic transmission could adapt to the Southeast sedan car, and the supplier is willing to set up plants in China to produce automatic transmission.

VII. Construction Scale and Content: an annual capacity of 50,000 -100,000 units. VIII. Co-op Method: buying automatic transmission from foreign countries, or looking for manufacture partners

set up factories in China.

2

No.2 Technology Requirement for Waste Transfer Cars Manufacture

I. Project Title: Technology requirement for waste transfer cars manufacture

II. Project Entity: Fujian Fudi Automobile Manufacture Co., Ltd. III. Project Managers: Chen Heping Tel: 13906980789

Fax: 0086-0598-3858578 Email: IV. Justification of the Project and Construction Conditions:

Our company is the automobile manufacture specialized in solid waste transfer cars and sweeping vehicle. We are the production base of Fujian special vehicle. With strong financial support, sales network, and technical engineers, we are ready and capable to undertake this project.

V. Visiting Purpose: Look for update technical support in waste transfer car manufacture.

VI. Construction Scale and Content: We plan to invest 5 million USD, construct a yard of 100mu (16. 47 acres), set up a factory with an area of 20000 square meters, and buying the update technical in waste transfer car manufacture.

VII. Co-op Method: buying technology VIII. Total Investment: 5.0 million USD, Foreign Capital to be used: 1.0 million USD, Cooperation of Chinese and Constitution: 4.0 million USD will be invested by our company.

IX. Economic Analysis: The annual output value of this project will reach 5.0million USD.

X. Project Development: The land with an area of 100mu (16. 47 acres) has been requisitioned.

3

No.3 Factory with Annual Production Ability of 10,000 Medium and Heavy Trucks

I. Project Title: Factory with Annual Production Ability of 10,000 Medium and Heavy Trucks

II. Undertakers: Fujian Sanming Puling Auto Industry Park Management Committee Fujian Newlongma Auto Co., LTD Yong’an Factory

III. Project directors and contact telephone: Zhu Fusheng: 0598-3815869 13906083027 Chen Heping: 0598-3819556 13906980789

IV. Justification of the Project and Construction Conditions: Fujian Newlongma Auto Co., LTD Yong’an Factory is a manufacturing enterprise listed in the catalogue bulletin of the State Development and Reform Commission for complete light, medium and heavy trucks and complete specialized vehicles. It is the truck manufacturing base of the auto industry in Fujian Province. The enterprise has passed the certificate of ISO9001:2000 and 3C with mainly 5 series of products and nearly 100 varieties. Traffic near the project is very convenient with Yingxia Railway to the north, the under-building Quansan expressway connected to the south, 205 national highway and Yongwu expressway connected to the east and provincial highway of 307 line traversing through the whole area. So the traffic condition is superior. In 2006, the auto production all over the country is 7.28 million, among which there were 3.41 million trucks. With the society development, medium and heavy types of trucks will be vast used in medium and long distance transportation, and the ascending rate of year demand will be up to more than 15-20%. Our province (Fujian Province), Guangdong province and Jiangxi province relatively fall behind in truck production in our country (except Tibet) with about 60,000 of year demand for trucks in these three provinces, and so there is great potential for trucks in the above mentioned areas. This project accords with the 21st category the 7th item in “Catalogue of Industries, Products and Technology Currently Particurly Encouraged by the State for Development”: Research system development for complete auto, motorcycle and engine, components.

V. Visiting Purpose: 1. Looking for partners to joint investment in setting up truck manufacture factory. 2. Looking for update technical support in medium and heavy truck manufacture.

VI. Construction Scale and Content: To construct a factory with annual production ability of 10,000 medium and heavy trucks with mainly construction of assembly workshop, logistics storage and one production line of complete truck assembling.

VII. Planned cooperation mode: joint investment, buying technology, or other cooperation method. .. VIII. Total investment: 13.51 million US dollars, with planned foreign investment of 13.51 million US dollars.

IX. Analysis on economic benefit: Annual production value can be up to 800 million RMB with 20 million RMB of profits.

X. Condition of the prophase progress: The truck project of Fujian Newlongma Auto Co., LTD Yong’an Factory is already listed as the provincial under-construction key project in 2007. And at present the construction of a 4000 mu (about 660 acres) Auto Industry Park is already started.

4

No.3.1 Factory with Annual Production Ability of 5,000 Specialized Vehicles

I. Project Title: Factory with annual production ability of 5,000 specialized vehicles



IV. Justification of the Project and Construction Conditions: Fujian Newlongma Auto Co., LTD Yong’an Factory is a manufacturing enterprise listed in the catalogue bulletin of the State Development and Reform Commission for complete light, medium and heavy trucks and complete specialized vehicles. It is the truck manufacturing base of the auto industry in Fujian Province. The enterprise has passed the certificate of ISO9001:2000 and 3C with mainly 5 series of products and nearly 100 varieties. Traffic near the project is very convenient with Yingxia Railway to the north, the under-building Quansan expressway connected to the south, 205 national highway and Yongwu expressway connected to the east and provincial highway of 307 line traversing through the whole area. So the traffic condition is superior. In 2006, the auto production all over the country is 7.28 million, among which there were 3.41 million trucks. With the society development, medium and heavy types of trucks will be vast used in medium and long distance transportation, and the ascending rate of year demand will be up to more than 15-20%. Our province (Fujian Province), Guangdong province and Jiangxi province relatively fall behind in truck production in our country (except Tibet) with about 60,000 of year demand for trucks in these three provinces, and so there is great potential for trucks in the above mentioned areas. This project accords with the 21st category the 7th item in “Catalogue of Industries, Products and Technology Currently Particurly Encouraged by the State for Development”: Research system development for complete auto, motorcycle and engine, components.

V. Visiting Purpose: 1. Looking for partners to joint investment in setting up special vehicle manufacture factory. 2. Looking for update technical support in special vehicle manufacture.

VI. Construction Scale and Content: To construct a factory with annual production ability of 5,000 specialized vehicles with mainly construction of assembly workshop, logistics storage and one production line of complete truck assembling.

VII. Planned cooperation mode: joint investment, buying technology, or other cooperation method. . VIII. Total investment to project: total investment to this project is 13.51 million US dollars with planned foreign

investment of 13.51 million US dollars. IX. Analysis on economic benefit:

Annual output value can be up to 600 million RMB with 25 million RMB of profits. X. Condition of the prophase progress:

The truck project of Fujian Newlongma Auto Co., LTD Yong’an Factory is already listed as the provincial under-construction key project in 2007. And at present the construction of a 4000 mu (about 660 acres) Auto Industry Park is already started.

5

No.3.2 Specialized Factory for Vehicle Axle

I. Project Title: Specialized factory for vehicle axle



IV. Justification of the Project and Construction Conditions: In the period of “the 11th five-year plan”, Yong’an factory’s planned total scale of production ability of trucks and specialized vehicles will be up to 55,000 vehicles with great demand for axles’ assembly. Fujian Newlongma Auto Co., LTD Yong’an Factory is a manufacturing enterprise listed in the catalogue bulletin of the State Development and Reform Commission for complete light, medium and heavy trucks and complete specialized vehicles. It is the truck manufacturing base of the auto industry in Fujian Province. The enterprise has passed the certificate of ISO9001:2000 and 3C with mainly 5 series of products and nearly 100 varieties. It has assembly production lines of front axle, rear axle and etc, and more than 900 various main producing equipments. An established professional axle factory which mainly produces front axle and assembly, rear axle stand, wheel hub, clutch shell and etc. in the industry park can make full use of the producing equipments of Yong’an Auto Factory and reduce investment. Its products can not only be assorted with that of those three main engine factories, but also can be sold in the Auto Fittings Trade City inside the industry park, and exported inside or outside the province through convenient transportation conditions.

V. Visiting Purpose: 1. Looking for partners to joint investment in setting up manufacture factory. 2.Looking for update technical support in vehicle axle and other vehicle parts’ manufacture.

VI. Construction Scale and Content: To build production lines with annual production ability of 70,000 sets of front axle assembly, rear axle stand, wheel hub, clutch shell and etc.

VII. Planned cooperation mode: joint investment, buying technology, or other cooperation method. . VIII. Total investment to project: total investment to this project is 40.54 million US dollars, with planned foreign


After the project is completed and put into production, the annual production ability can be up to 70,000 sets which can generate up to 1,260 million RMB of production value with 60 million RMB of profits.

X. Condition of the prophase progress: The truck project of Fujian Newlongma Auto Co., LTD Yong’an Factory is already listed as the provincial under-construction key project in 2007. And at present the construction of a 4000 mu (about 660 acres) Auto Industry Park is already started.

6

No.3.3 Specialized Factory for Vehicle Body Assembly

I. Project Title: Specialized factory for vehicle body assembly II. Undertakers: Fujian Sanming Puling Auto Industry Park Management Committee

Fujian Newlongma Auto Co., LTD Yong’an Factory III. Project directors and contact telephone:

Zhu Fusheng: 0598-3815869 13906083027 Chen Heping: 0598-3819556 13906980789

IV. Justification of the Project and Construction Conditions: Fujian Newlongma Auto Co., LTD Yong’an Factory is a manufacturing enterprise listed in the catalogue bulletin of the State Development and Reform Commission for complete light, medium and heavy trucks and complete specialized vehicles. The enterprise has passed the certificate of ISO9001:2000 and 3C with mainly 5 series of products and nearly 100 varieties. Brand of “Fujian” is one of the first ten brands in Chinese auto industry. The enterprise possess production lines for vehicle body assembly production and more than 900 various main producing equipments. According to the plan in period of “the 11th five-year plan”, Yong’an factory’s planned total scale of production ability for trucks and specialized vehicles will be up to 55,000 with great demand for body assembly and consequent good developing potential. A specialized vehicle body factory set up in the industry park will make full use of producing equipments of Yong’an Auto Factory and reduce investment. Its products can not only be assorted with that of the three main engine factories, but also can be sold in the Auto Fittings Trade City inside the industry park, and exported inside or outside the province through convenient transportation conditions.

V. Visiting Purpose: 1. Looking for partners to joint investment in setting up manufacture factory. 2.Looking for update technical support in vehicle body assemblies’ manufacture.

VI. Construction Scale and Content: To produce 30,000 sets of various series of vehicle body assemblies every year, and introduce robot automatic melting and welding equipments and top finish automatic spraying equipments step by step.

VII. Planned cooperation mode: joint investment, buying technology, or other cooperation method. . VIII. Total investment to project: total investment to this project is 13.51 million US dollars, with planned foreign


Annual output value can be up to 600 million RMB with 25 million RMB of profits. X. Condition of the prophase progress:

The truck project of Fujian Newlongma Auto Co., LTD Yong’an Factory is already listed as the provincial under-construction key project in 2007. And at present the construction of a 4000 mu (about 660 acres) Auto Industry Park is already started.

7

No.4 ABS Brake System

I. Project Title: ABS Brake System

II. Project Entity: Fuzhou Qingkou Invest Area Management Committee III. Project Manager: Muhua Lin Tel: 0591-22760066


1. Justification: Locating in Fuzhou, Qingkou Invest Area is main base of Auto manufacture in Fujian. There are three auto makers in this area, South East (Fujian) Motor Corporation Ltd, Daimler Chrysler (China) Ltd, FuJian HiyYat Silver Special Car Industry Ltd.co, more than 120 first and second class auto parts suppliers and about 20 logistic companies. In the area, the entire car maker and the suppliers realize in the area the fitting supply chain. Presently, they also need more automobiles suppliers to form a complete set for it. The entire plan area is 55 square kilometers. The industrial areas are 16 square kilometers. At present, there is no gear box production enterprise in Qingkou Invest Area. 2. Constriction Condition: Geographical superiority: The geographical position of Qingkou Invest Area is superior, is away from the Fuzhou downtown center 25 kilometers, to Changle international airport 38 kilometers, to Mawei harbor 12 kilometers, to Jiangyin harbor 40 kilometers. 324 highways span entire area. Jingfu Speedway from East-west and Tongsan Speedway from South-north cross here. The constructing Fuxia railroad is also set the station in the area. Fuzhou has several public transportation lines round-trip investment area. Cost superiority: Along with the automobile industry chain further development, Qingkou Invest Area gathered the more manufacturers, so all kinds of fitting’ price superiority is gradually obvious. Simultaneously, Qingkou Invest Area attracts massive special talented person in automobiles industry field. In addition, sufficient labor resources make the manpower cost more superior. In the area, the basic establishment is complete. The electric power belongs to the national electric power network, already had 220V and the 110V transformer substation. The transformer substations of Dongtai 550KV Qianjia Mountain 110KV are in the construction. The electrovalence for industry use is 0.528 Yuan/degree. In the water supply aspect, Sanxikou reservoir, Xidou reservoir, Chengmen Guohui water plant can satisfy the industrial production and the housing domestic water use. The water fee is 1.38 Yuan/ton. Environment superiority: The investment environments become more and more complete. We not only provide the project examines and approves to the processing goes into production for the investor, but also thorough, convenient, quick and high-quality service. The investment area is unceasingly developing a perfect and standardized management and building a stable invest environment for investors. The water, electricity, road, communication and sewage farm are complete. The hotel, upscale housing, staff apartment, business life necessary facility and so on trade supermarket, leisure center, recreation center, medical health care are all in constriction.

V. Visiting Purpose: Look for foreign enterprise investment in Qingkon setting up ABS Brake System manufacture factory.

VI. Construction Scale and Content: The construction annual production capacity is 300,000 sets of automobiles ABS Brake System.

VII. Co-op Method: Foreign company set up a Solely Foreign-owned Enterprise

8

VIII. Total Investment 20million USD, Foreign Capital to be used 10million USD IX. Economic Analysis:

The justification of the project and constriction condition showed above, has confirmed that the investors will obtain economic benefit if there are modern the production technology and the advanced managerial experience.

X. Earlier period work progress situation: The basic establishment for project construction is complete. The water, electricity, road, communication and sewage farm are complete. The cost superiority is obvious.

9

No.4.1 Auto Gear-box

I. Project Title: Auto Gear-box

II. Project Entity: Fuzhou Qingkou Invest Area Management Committee III. Project Manager: Muhua Lin Tel: 0591-22760066


1. Justification: Locating in Fuzhou, Qingkou Invest Area is main base of Auto manufacture in Fujian. There are three auto makers in this area, South East (Fujian) Motor Corporation Ltd, Daimler Chrysler (China) Ltd, FuJian HiyYat Silver Special Car Industry Ltd.co, more than 120 first and second class auto parts suppliers and about 20 logistic companies. In the area, the entire car maker and the suppliers realize in the area the fitting supply chain. Presently, they also need more automobiles suppliers to form a complete set for it. The entire plan area is 55 square kilometers. The industrial areas are 16 square kilometers. At present, there is no gear box production enterprise in Qingkou Invest Area. 2. Constriction Condition: Geographical superiority: The geographical position of Qingkou Invest Area is superior, is away from the Fuzhou downtown center 25 kilometers, to Changle international airport 38 kilometers, to Mawei harbor 12 kilometers, to Jiangyin harbor 40 kilometers. 324 highways span entire area. Jingfu Speedway from East-west and Tongsan Speedway from South-north cross here. The constructing Fuxia railroad is also set the station in the area. Fuzhou has several public transportation lines round-trip investment area. Cost superiority: Along with the automobile industry chain further development, Qingkou Invest Area gathered the more manufacturers, so all kinds of fitting’ price superiority is gradually obvious. Simultaneously, Qingkou Invest Area attracts massive special talented person in automobiles industry field. In addition, sufficient labor resources make the manpower cost more superior. In the area, the basic establishment is complete. The electric power belongs to the national electric power network, already had 220V and the 110V transformer substation. The transformer substations of Dongtai 550KV Qianjia Mountain 110KV are in the construction. The electrovalence for industry use is 0.528 Yuan/degree. In the water supply aspect, Sanxikou reservoir, Xidou reservoir, Chengmen Guohui water plant can satisfy the industrial production and the housing domestic water use. The water fee is 1.38 Yuan/ton. Environment superiority: The investment environments become more and more complete. We not only provide the project examines and approves to the processing goes into production for the investor, but also thorough, convenient, quick and high-quality service. The investment area is unceasingly developing a perfect and standardized management and building a stable invest environment for investors. The water, electricity, road, communication and sewage farm are complete. The hotel, upscale housing, staff apartment, business life necessary facility and so on trade supermarket, leisure center, recreation center, medical health care are all in constriction.

V. Visiting Purpose: Look for foreign enterprise investment in Qingkon setting up automobiles Gear-box manufacture factory.

VI. Construction Scale and Content: The construction annual production capacity is 300,000 sets of automobiles Gear-boxes.

VII. Co-op Method: Foreign company set up a Solely Foreign-owned Enterprise

10

VIII. Total Investment 5million USD, Foreign Capital to be used 2.5million USD IX. Economic Analysis:

The justification of the project and constriction condition showed above, has confirmed that the investors will obtain economic benefit if there are modern the production technology and the advanced managerial experience.

X. Earlier period work progress situation: The basic establishment for project construction is complete. The water, electricity, road, communication and sewage farm are complete. The cost superiority is obvious.

11

No.5 Derivative of Tripterygium Wilfordii Lactonic Alcohol and Its Application

I. Project Title: Derivative of Tripterygium wilfordii lactonic alcohol and its application

II. Project Entity: Fujian Provincial Development and Reform Commission

Fujian Shanyang Tripterygium wilfordii Industrial Development Co. Ltd. III. Project Manager: Nie Bingfeng, Jiang Jianguo Tel: 0591-87063353, 0598-7834178

Fax: 0598-7834178 Email: [email protected], [email protected] IV. Construction reasons and conditions:

The company has built a 42,000-mu cultivation base for Tripterygium Wilfordii, involving more than 3,000 households. The project aims to combine all steps of preproduction, in-production and postproduction of Tripterygium Wilfordii and prolong its industrial chain so as to realize the integration of production, processing and sales.

V. Visiting Purpose: Looking for update technology support in tripterygium wilfordii biomedical processing and industrial production.

VI. Construction scale and content: 120 million RMB will be needed for investment in the establishment of Tripterygium Wilfordii biomedicine factory. Investment for the first-stage will stand at 60 million RMB. After completion, the output of triptolide and Tripterygium Glycosides extract is expected to reach 2000 grams and 500 kilograms respectively.

VII. Cooperative form: Joint-venture in setting up biomedicine factory, or buying technology from foreign countries.

VIII. Total investment US$ 11.61 million, foreign capital to be used US$ 5 million , Investment from the Chinese Party: US$ 11.11 million

IX. Analysis of economic efficiency: After the completion of the first-stage construction, the annual sales revenue will reach 62.2 million RMB with the profit reaching 10.27 million RMB and the taxation standing at 7.01million RMB.

X. Preliminary progress report: The first-phase construction has been in the main completed and it is expected to be put into production in Jan. 2008.

XI. Project supporting facilities: The County of Taining plans to build a 100,000-mu cultivation base for Tripterygium wilfordii. And it has already built a 42,000-mu cultivation base and a base with an annual output of 10 million Tripterygium wilfordii seedlings. Our company has signed a technological contract of “Triptolide Raw Material and intermediate product extraction process and traditional Chinese medicine—Tripterygium Glycosides’s technical renovation and second development” with Shanghai Institute of Material Medical, Chinese Academy of Sciences.

12

No.6 Aquatic Product Deep Processing and Utilization

I. Project Title: Aquatic Product Deep Processing and Utilization

II. Project Entity: Fujian Provincial Development and Reform Commission Xiawei Foodstuff Co., Ltd., Ningde City

III. Project Managers: Nie Bingfeng, Cai Shuqiu Tel:0086-13959393839 Fax: 0086-593-2916777 Email: [email protected] [email protected]

IV. Justification of the Project and Construction Conditions: Ningde City is a big oceanic city in Fujian Province, rich in various fishery resources, and there are over 600 kinds of the sea fishes. Within the whole city there are 400 thousand net-cages for the cultivation on the sea, with its annual output of 70 thousand tons; there are more than 10 thousand fishing boats, with its annual fishing output of over 10 thousand tons, especially its artificial growth and breeding of big yellow croakers has reached the level leading in the international field. To build “Mindong on the Sea”, and to develop its oceanic industry has become a project with the most superior condition and most active developing economy in Mindong. The main body of countryside industrial structure of Ningde City is still a traditional agriculture, with cultivation as its main industry, whose business form is rough, whose economic structure is old and dull, and whose economic growth is slow. Therefore, it is necessary trend to set up a project for a high, delicate and deep processing for the development of the enterprise, and it also meets the needs of Fujian provincial developing strategy to build the Taiwan Straits Western Shore Economic Zone.

V. Visiting purpose: Look for technical support in the manufacture process. Look for partners who could help us sale products in EU market.

VI. Construction Scale and Content: To build delicate processing workshops of 8,400.00 square meters, and their complete facilities, and to stall one delicate and deep processing production line for special aquatic products such as big yellow croakers, Genuine porgy sushi slices, and special fruit or vegetable canned foodstuff, and the other production line for comprehensive utilization of their remains.

VII. Total Investment 10 million USD, Foreign Capital to be used 6 million USD, Investment of Chinese party: get the loan of US$ 2 million from Bank of China, and the other that will be the enterprises own capital of US$ 2 million.

VIII. Economic Analysis: After the project is put into use, it will newly increase its production value of 127.60 million RMB, with profit after tax of 13.19 million RMB, and newly-increasing tax of 6.62 million RMB; its financial internal benefit rate is 19%; its investment profit rate is 19%; the investment will be recouped in 6 years, with a relatively strong ability to resist risk in the investment.

IX. Project Development: Work such as approvals for levying land, scheming, and setting up the project has so far been completed.

13

No.7 Cross-Strait（Dongshan, Fujian）Aquatic Products Processing & Distribution Base

I. Project Title: Cross-Strait（Dongshan, Fujian）Aquatic Products Processing & Distribution Base

II. Project Entity:：Project Construction Headquarters of Cross-Strait（Dongshan, Fujian）Aquatic Products Processing & Distribution Base

III. Project Manager：Hu Dongliang Tel：0086—596—5835089 Fax：0086—596—5839366 Email:

IV. Construction reasons and conditions: V. Visiting Purpose:

Looking for foreign company invest in our port construction. Looking for foreign companies invest in Dongshan in aquatic products processing or distribution.

VI. Construction scale and content: 2 square kilometers of land are planned, with a total investment of 800 million Yuan mainly for Daao National Central Fishing Port, Comprehensive Aquatic Products Market , Aquatic Products Processing Zone, Bonded Logistics Zone

VII. Total Investment: $108.11million，planned foreign funds $50 million, or other foreign investment: port construction.

VIII. Economic Analysis： The project will create 100 million Yuan of profit and tax annually, and boost local aquatic product industry greatly

IX. Project Preparation： 95% of Daao National Central Fishing Port construction work has been completed; the Comprehensive Aquatic Products Market is in design stage；6 companies is on production operation and 7 companies is under construction in the Aquatic Products Processing Zone；Land for Bonded Logistics Zone is being requisite.

X. Project supporting facilities: A 10,000-ton harbor is planned

Dongshan is located in the southeast of Fujian Province, rich in fishery resources, and only 110 nautical miles far away from Gaoxiong, Taiwan. As one of the top 100 fishery counties in China, Dongshan has exported aquatic products to more than 20 countries and regions such U.S.A, EU, Japan and Taiwan region. In 2006, Dongshan’s marine fisheries production reached 330,000 tons, and fishery output valued 2.23 billion Yuan. The project of Cross-Strait（Dongshan, Fujian）Aquatic Products Processing & Distributing Base, with the capacity of production, process, storage and transportation, is approved by Taiwan Affairs Office of the State Council to make Dongshan an aquatic product distribution center for coastal areas of Fujian, Taiwan, Guangdong, Zhejiang, even for Southeast Asian and South Pacific areas. It will deal with 500,000 tons aquatic products which comes from other domestic and international areas, boost Dongshan economic and social development by increasing local aquatic production capacity to 800,000 tons and creating $1 billion output.

14

No.8 Hong Bo Opto-electronics Garden

I. Project Title: Hong Bo Opto-electronics Garden

II. Project Entity: Fujian Hong Bo Group. III. Project Managers:You Yuxian Tel: 0591-88070018


We plan to establish a large scaled and supporting LED manufacture base to promote LED which is an new generation environment-friendly light source.

V. Visiting Purpose: Looking for update technology support in LED manufacture process. Looking for cooperation partners invest together in the LED manufacture base construction and operation.

VI. Construction Scale and Content: The LED manufacture base will be built and work for LED wafers and LED applied products , some of its details are as follows: the area of its Collected land will be 200 acres and will be built on 2008;The area of its building will be 200000m2; the total investment will amount to one billion RMB. Production value will be up to 1.5 billon RMB per year.

VII. Co-op Method: Join-Venture in setting up LED manufacture base. Buying update technologies in LED manufacture process.

VIII. Total Investment: about 130 million USD. Foreign Capital to be used: about 40 million USD, or other foreign investment method: support technology or support manufacturing equipment. Investment from Chinese party factory building 0.25 billon RMB , equipment 0.4 billon RMB etc.

IX. Economic Analysis: Production value will be up to 1.5 billion RMB per year. Tax will be about 0.45 billion RMB per year

X. Project Development: 1. Land for the base construction is almost ready 2. Encapsulating LED light source and manufacturing LED applied products have been carried out and some

of the their products have been introduced to the market 3. Have established a platform for creating LED technology and employed lots of advanced technicians . 4. Some research project have been accepted as national grade creative projects and got some achievements. 5. The long-term programming project has been carried out.

XI. Project condition: 6. The preparing job has been done. 7. The equipment needed by the project can be bought both home and abroad. 8. The technology is matured.

15

No.9 Requirement of Technology and Equipment in Ganoderma processing

I. Project Name: Requirement of Technology and Equipment in Ganoderma processing

II. Project Entity: Fujian Xianzhilou Biotechnological Co., Ltd. III. Project Manager: Zhang Hua Tel:0086-591-83053398

Fax: 0086-591-83053396 Email: [email protected] IV. Justification of the Project and Construction Conditions:

Company background: Fujian Xianzhilou Biological Science & Technology Co., Ltd. was founded in 2001. It is a company engaged in the biological research, cultivation, manufacturing and marketing of nutraceutical fungal products, such as Xianzhilou branded Ganoderma lucidum, Ganoderma sinensis, Coriolus versicolor, Cordyceps sinensis, Agaricus, Hericium erinaceum, Grifola frondosa, etc. With a registered capital of 10 million RMB, by virtue of its technical strength, the company has independently developed and produced nearly 40 varieties of the brand of “xianzhilou” ganoderma products, such as: Ganoderma Lucidum Spore Oil Capsule, Ganoderma Lucidum Spore powder Capsule, Ganoderma Lucidum Spore Powder, Ganoderma Lucidum Tea, Ganoderma Lucidum Spore Superfine Powder,Ganodrema Lucidum Slices. Justification of the Project and Construction Conditions: 1. The traditional Chinese medicine contains many ingredients with special functions, verified by science and technology. It is worthwhile to popularize it. 2. The supercritical liquid extraction technology has developed from the extractive oil and non-febrile compound to the production of nanometer particles and the application of accurate separation. The advanced technology and equipment of the western countries will help broaden our company’s prospects, improve product quality and diversify our products. 3. Our company has obtained patent of the State in the extraction technology of Ganoderma Lucidum. We have also built GMP workshops, production and sales channels, which have certain advantages in the future practical use and industrialization of R&D achievements.

V. Visiting Purpose: 1. Seek for update extraction and deep processing technology of Ganoderma, which increase polysaccharose

and triterpane contents in our products. And make the high absorption for our consumer. Meanwhile, the technology should reach the leading level of the industry.

2. Buying equipments: Looking for high-tech manufacturing and testing equipments. Such as advanced Ganderma lucidum spore oil super-critical extraction equipment, and high performance liquid chromatograph equipment.

3. Looking for powerful agent who has a certain influence on European market. They are willing to expand Ganoderma series products together with our company, and annual sales in European market shall reaches more than RMB 10,000,000.

VI. Construction scale and content: We plan to build a production line of CO2 supercritical liquid extraction for nanometer particles.

VII. Cooperative form: Buying technology, buying equipments, cooperative invest in production line construction, sale products to European market. Or others: technology trainning, technology cooperation in new product R&D etc.

VIII. Total investment of production line: US$ 4 million , investment from the Chinese party: US$ 2 million by our company, and US$ 2 million requirements from the foreign cooperation partner.

16

IX. Analysis of economic efficiency: After the project is put into production, the annual output value will reach 3.5 million RMB.

X. Preliminary progress report: So far, the preliminary work has been accomplished.

XI. Project supporting facilities: We have associated testing equipment and technical support from institutions of higher learning in Fujian.

17

No.10 Development in Tea Seeds Oil Products

I. Project Name: Development in tea seeds oil products health

II. Project Entity: Shenlang biotechnology group Co, Ltd, Fujian province, China III. Project Managers: Hu Fengxiang Tel:0086- 13507597633


Our company is specialized in biological products. Our staple products are tea saponin, tea protein, tea polyphenols, and daily washing necessities. Tea seeds oil contains over 90% unsaturated fatty acid, higher than olive oil, It is called” Ease Olive Oil”, Tea seeds oil also rich contains some trace Ve and TP elements etc. It is proved that tea seeds oil can improve stomach function and has other curative functions. Therefore, processing tea seeds oil to health care products has good market prospect.

V. Visiting purpose: Looking for cooperation partners invest in tea seeds oil R&D, and construct a capsule production line of tea sees oil.

VI. Construction Scale and Content: We plan to build a soft capsule production line produces 50 tons tea seeds oil annually.

VII. Co-op Method: Join-Venture to set up the production line. VIII. Total Investment requirement: 5.0 million USD. Foreign Capital to be used 30 million USD. Investment

of Chinese party: 20 million USD will be invested by our company. IX. Economic Analysis:

The annual output value of this project will reach 90million USD. X. Project Development:

Formula and production technology are provided by Fujian Agriculture and Forestry University .

18

No.11 Energy-saving Technology for Kilns in Ceramics Industry

I. Project Title: Energy-saving Technology for Kilns in Ceramics Industry

II. Project Entity: Fujian Dehua Quanfeng Porcelain Clay Co., Ltd. III. Project Managers: Zheng Wenchang Tel: 0086-0595-23597608


Our company is located in Dehua county, Fujian province, known as one of the three china capitals and its long history. After the reform and opening of Chinese economy ,the economic development of the ceramics industry in our county has moved forward to another level .In order to propel the development of our ceramics industry ,we are in need to import update technology in ceramics industry . Our company is dedicated to the development of energy-saving technology in ceramics industry. Meanwhile, our company is a base to produce china clay. We are abundant in technicians and financial support to undertake this project.

V. Visiting purpose: Looking for update technology of energy-saving for Kilns. Looking for new machine and equipments in this area.

VI. Construction Scale and Content: We plan to invest 1.0 million USD, construct a yard of 30 mu (4.94 acres), set up a factory with an area of 200 thousand square meters and import new-high machines&technology for kilns in ceramics industry.

VII. Co-op Method: Buying Technology, buying equipment. VIII. Total Investment: 2.0 million USD, Foreign Capital to be used: 1.0 million USD. Investment of Chinese

party: 1.0 million USD will be invested by our company. IX. Economic Analysis:

The annual output value of this project will reach 2.0million USD. X. Project Development:

The land with an area of 4.94 acres is ready.

19

No.12 Requirement of Equipment and Technology in Swage Disposal of Ceramics Industry

I. Project Title: Requirement of Equipment and Technology in Swage Disposal of Ceramics Industry

II. Project Entity: Gaide Township Government, Dehua County, Fujian Province Fujian Dehua Rishun Ceramic Co., Ltd.

III. Project Managers: Yan Ruchun, Jiang Zuomin Tel: 0086-13805935023 Fax:0086-595-23511023 Email: [email protected]

IV. Justification of the Project and Construction Conditions: Our company produces 100 thousand ceramics articles with an annual output value of more than 20.0 million RMB. Meanwhile, we consume about 100 tons water daily in the manufacture process, which results to pollution and waste in some degree. We are in need to seek for update technology abroad to solve this problem. With strong consciousness of environment protection and energy saving, we are ready for financial support and other factors to undertake this project.

V. Visiting purpose: Buying equipment, looking for update technology of swage disposal in ceramics industry.

VI. Construction Scale and Content: We plan to construct a yard of 30 mu (4.94 acres) ,set up a factory with an area of two thousand and fine hundred square meters and buy the water-disposal equipments and technology from abroad.

VII. Total Investment: 1.0 million USD, investment of Chinese entity: 1.0million USD will be invested by our company.

VIII. Economic Analysis: The annul output value of this project will surpass 30.0 million RMB, which will bring in satisfying economic

and social benefits. IX. Project Development:

A piece of land with an area of 30 mu or 4.94 acres has been requisitioned.

20

No.13 Requirement of Production Equipment in Household Ceramics Manufacture

I. Project Title: Requirement of Production Equipment in Household Ceramics Manufacture

II. Project Entity: FUJIAN GUANFU MODERN HOUSEHOLD WARES CO，LTD III. Project Managers: Lin Guoqin Tel:0086-13505090309

Fax:0086-595-23517777 Email: [email protected] IV. Justification of the Project and Construction Conditions:

Construction justification: we plan to buying advanced equipments in order to produce high-grade household ceramics. Purchasing plan: we look for production equipments ,with one-step process from start to finish ,manufacturing household ceramics .

V. Visiting Purpose: buying equipments VI. Construction Scale and Content:

We currently has modern standard plants of more than 20 million square meters and three production lines, three advanced production equipments and three kilns.

VII. Total Investment: 3.0million USD, 1.75 million U.S dollars will be invest by our organizations, Foreign Capital from our partners: 2.0 million USD, or other capital includes a loan of 50 thousand U.S dollar.

VIII. Economic Analysis: We produce 10 million ceramics articles with an annual output value of 1.2 billion RMB and an annual tax paid reaching more than 10 million RMB.

IX. Project Development: Our company has enough professional researchers, analysts, administrators and complete sets of workshops.

The exploit and the development of high-grade ceramics are on the way and we are ready to carry out mid-term trial production.

21

No.14 Artificial Cultivation of Cephalotaxus Fortunei and Factory Production of Cephalotaxus

Fortunei Diesteralkali

I. Project Name: Artificial cultivation of cephalotaxus fortunei and Factory Production of cephalotaxus fortunei diesteralkali

II. Project Entity: Fujian Mingxi Development and Reform Bureau III. Project Manager: Luo Yuhua Tel: 13950982936

Fax: 0598-2866309 Email: [email protected] IV. Construction reasons and conditions:

The cephalotaxus fortunei diesteralkali (Harringtonine and Homoharringtonine) is a kind of alkaloid extracted from cephalotaxus fortunei, which is highly effective on antineoplastics. The clinical results prove that it shows good curative effect for acute promyelocytic leukemia(APL), acute monocytic leukemia(amol), acute erythroleukemia(AEL) and chronic myelocytic leukemia(CML). It exerts certain influence on 3H marked aspargagine incorporated protein and 3H marked thymidine incorporated DNA. Besides, it can lead to cell differentiation, increase CAMP content and restrain composition of glucoprotein. The favorable natural conditions in Mingxi are quite suitable for the cultivation of cephalotaxus fortunei. The artificial breeding and cultivation technology of Mingxi is at the top domestically. The cephalotaxus fortunei artificially planted has a high content of active ingredients and biomass. So far, we have selected the best seeds of cephalotaxus fortunei, cultivated 2 million seedlings and built a 400-mu (about 66 acres) cultivation base.

V. Visiting Purpose: Looking for foreign companies invest in factory production of cephalotaxus fortunei series.

VI. Construction scale and content: Build a production line with an annual output of 100 kg cephalotaxus fortunei diesteralkali (Harringtonine and Homoharringtonine) and a cultivation base of 8,070 mu (about 1330 acres) for cephalotaxus fortunei.

VII. Total investment US$ 7.30 million, foreign capital to be used US$ 7 million, investment from the Chinese party: invest US$ 2.6 million for the artificial cultivation base of cephalotaxus fortunei.

VIII. Analysis of economic efficiency: Sales revenue: 0.25 billion RMB. Profit: 115.75 million RMB. Financial internal rate of return: 72.76%. Financial net present value (i=15%): 188.15 million RMB. Payback period: 4.7 years.

IX. Preliminary progress report: We have selected the best seeds, built the cultivation base covering 400 mu (about 66 acres) areas, and

cultivated 2 million seedlings of cephalotaxus fortunei.

22

No.15 End-product Development of Galanthamine; Extraction of EGCG, Catechin, and

Trans-Resveratrol

I. Project Name: End-product development of Galanthamine; extraction of EGCG, catechin, and trains-resveratrol

II. Project Entity : Fujian Mingxi Development and Reform Bureau Fujian Like Biotechnology Co., Ltd.

III. Project Manager: Luo Yuhua, Weng Yungui Tel: 0086-598-286666 13806966177 Fax:0086-598-2810596 Email: [email protected]

IV. Construction reasons and conditions: Production and effects of the products: Galanthamine Hydrobromide, a drug used for the treatment of mild and moderate Alzheimer’s disease, is widely used in pharmaceutical production. And the products are mainly exported to Europe and America. There was a market demand for 4,500 kilograms in 2006. As China has gradually entered into an old-age society, there is a growing number of elderly people over the age of 65, thus further expanding its consumption. Tea Polyphenols is extracted from Green Tea. And it is the generic term for polyphenolic substance, such as catechin, flavone, phenolic acid and anthocyan, etc. It is used to suspend radical chain reaction in human body and clean away super oxygen like SOD. Its usage for bacteriostasis and sterilization is widely adopted in the fields of medicine, health products and food. With a broad potential market, its yearly output value will reach 40 million RMB, taxation will be 6.5 million RMB and the profit will be 10 million RMB.

V. Visiting purpose: Look for update technical support in the production process. Look for cooperation partners in sale our product in European market.

VI. Construction scale and content: Increase the production of galanthamine hydrobromide and galanthamine raw material, and produce tea polyphenols with an annual output of 300 tons and 5000 kilograms of high-purity resveratrol. The project has been listed as one of the key projects of Fujian in 2008.

VII. Total investment: US$ 5 million, foreign capital to be used US$ 2.5 million, Investment from the Chinese party: Natural persons Weng Yungui and Lin Xuefa will make joint investment, holding 55% and 45% of the shares respectively.

VIII. Analysis of economic efficiency: After completion of the project, the yearly output value is expected to reach 80 million RMB, the taxation will

be 12 million RMB and the profit will be 20 million RMB. IX. Preliminary progress report:

In June 2005, the company was established with a production line for 150 kilograms of Galanthamine Hydrobromide. Now another production line is under installation for 300 tons of high-purity Tea Polyphenol. The extraction of Polygonum Cuspidatum has already been finished, and the Resveratrol is under trial production.

23

No.16 Enlarge the Production Line with an Annual Output of 5 Million Pneumatic Tool

I. Project Name: Enlarge the production line with an annual output of 5 million pneumatic tools

II. Project Entity: Fujian Mingxi Development and Reform Bureau Fujian Silite Pneumatic Tool Co., Ltd.

III. Project Manager: Luo Yuhua, Huang Liqun Tel:0086-13950281068 Fax: 0598-2810508 Email: _________

IV. Construction reasons and conditions: Our company was founded in Oct, 2006. It covers an area of 48 mu with 16, 000 m2 of buildings. It has a registered capital of 5 million RMB and spent 40 million RMB in construction. It has more than 50 sets of advanced equipment, such as machining center, numerically controlled lathe, numerically controlled milling machine and 3 assembly lines with an annual output of 3 million pneumatic tools. Our company has been certified by ISO9001 and CE. Our company has established a production line with an annual output of 3 million pneumatic tools and has now acquired another 48 mu (about 8 acres) of land for expansion. Due to our advanced production equipment and technique, huge potential market and strong sales and marketing team, conditions for expansion of production have become mature.

V. Visiting Purpose: Buying basic facilities for the pneumatic tool production line to improve machining center, buying numerically controlled lathe, numerically controlled milling machine and fully automatic assembly line.

VI. Construction scale and content: The project will take up 50 mu (about 8 acres) of land and the workshop building will cover 160, 000 m2. We plan to introduce 50 sets of production equipment for pneumatic tools and 3 fully automatic assembly lines.

VII. Total investment US$ 8.59 million, foreign capital to be used US$ 3.64 million, investment from the Chinese Party: investment of US$ 4. 95 million.

VIII. Analysis of economic efficiency: Total output value is expected to reach 90 million RMB after the completion of this project, with the recovery period estimated to be 2.5 years.

IX. Preliminary progress report: 50 mu (about 8 acres) of land in the industrial park has been acquired.

24

No.17 Fuzhou Binhail Industrial Zone Sewage Treatment Plant

I. Project Title: Fuzhou Binhail Industrial Zone Sewage Treatment Plant

II. Project Entity: Changle Development & Reform Bureau III. Project Managers: Zheng Minguang Tel:0086-591-28881226


Binhai Industrial Zone covers a total area of about 40 square kilometers and the sewage volume will soon reach 25,120m3/d. If no measures taken for this pollution situation and let it go on, it will cause huge impact on the coastal area of Changle, and bring harm to Xiasha lido mussel conservation area and aquaculture area. Therefore, the sewage treatment for Binhai Industrial Zone is in urgent need.

V. Visiting Purpose： Looking for foreign company invest in constructing sewage treatment plant.

VI. Construction Scale and Content: Processing capacity of 30,000 tons per day in the near future, covering an area of 54 mu, containing such auxiliary facilities as water pump houses, disinfection pools, complex building. To build 3.5 km of DN1000 pressure tap water drainage tube.

VII. Co-op Method: Foreign direct investment or BOT VIII. Total Investment USD 600 million, Foreign Capital to be used USD 200 million, or BOT

IX. Economic Analysis: 0.629 RMB/ton, the unit operation cost is 0.403 RMB/ton, the financial internal rate of return on the capital (after tax) is 9.69%, and the financial net present value on the capital is 4.1176 million RMB.

X. Project Development: The review for the feasibility study has been completed and now it is in the process of applying for approval.

25

No.18 Building Construction for Standardized Manufacturing Plant in Licheng

I. Project Title: Building Construction for Standardized Manufacturing Plant in Licheng

II. Project Entity: Development and Reform Bureau of Licheng District, Putian City III. Project Managers: Jiang Ruihua Tel:0086-594-2296791


With the fast development of economy in this district, there has arisen a lack of available land for the development of industry. It, therefore, is urgently necessary to make the best out of the land resources in hand and provide a sufficient amount of land for those small-sized as well as medium-sized companies. Huangshi Industrial Park, which has taken shape as a park for industrial development, has got a clear scheme for the characteristics and layout of the industry here. A construction of standardized manufacturing house in The Town of Beigao, neighboring this industrial zone, will be beneficial to the building of supportive programs for the guiding project, the absorbing of small-sized and medium-sized supportive companies, the supporting of the development of small-sized and medium-sized companies as well as private economy, the regulating of company and environment management, and the improving of the use of land resources. The market vistas are good, the preparations are finished, and both economic profits and ecological benefits will be considerable.

V. Visiting Purpose: Looking for foreign partners invest in the plant building construction.

VI. Construction Scale and Content: 360 mu (about 60 acres) land will be needed; the total area of the construction will be 600,000 m2, including 400,000 m2 for manufacturing house and 200,000 m2 for supportive facilities.

VII. Total Investment 70 million USD, Foreign Capital required: 70 million USD. VIII. Project Development:

The proposal of the project is ready.

26

No.18.1 Sewage Disposal Factory of Licheng District, Putian

I. Project Title: Sewage Disposal Factory of Licheng District, Putian

II. Project Entity: Development and Reform Bureau of Licheng District, Putian City III. Project Managers: Jiang Ruihua Tel:0086-594-2296791


With a population of 480,000, Licheng District is the downtown area of Putian City. With the construction of Huangshi Industrial Park, together with the continuous progress of regional economy and the improving of the level of people’s life, the problem of environmental pollution caused by sewage is getting more and more serious. In order to achieve such aims as to perfect the fundamental facilities, to lessen the pollution on the environment, to protect the water resources, to improve the environment for investing as well as the image of the city and the quality of people’s life, the construction of a sewage disposal factory in Licheng District is not only necessary but urgent.

V. Visiting purpose: Looking for foreign partners invest in the sewage disposal factory. Looking for updated technology supports in sewage disposal processing. Buying relevant equipments for sewage disposal processing.

VI. Construction Scale and Content: A sewage disposal factory and a sewage discharging system with the ability to dispose 60,000 tons of sewage every day. The project will be carried out in 2 stages, each taking 30,000 tons. With the specific as following: The first part of the project will be able to dispose 30,000 tons of sewage every day. And it is designed to provide service to: 1) over 100 enterprises in Huangshi Industrial Park; 2) the town of Huangshi; 3) The Arts & Crafts Town, Putian, China (taking up an area of 34 hectares with a building area of 600,000 m2 and a total investment of US$120,000,000 and an accessory living zone); 4) The Shoes & Clothes Town, Putian, China (taking up an area of 21 hectares with a building area of 200,000 m2 and a total investment of US$40,000,000); 5) Putian Railway Station and its surrounding area. The second part of the project will also be able to dispose 30,000 tons of sewage every day. And it is designed to provide service to: 1) Beigao Industrial Zone, Huangshi Town, Putian City (with a planned area of 1,500 hectares); 2) Meilang Port (to contain 3 docks for 100,000-ton ships and 11 docks for 20,000-ton ships); 3) Putian Airport; 4) the town of Beigao and that of Xindu; 5) The Town for Commerce, Trade and Logistics, Putian (with a planned area of 300 hectares)

VII. Co-op Method: Join-Venture cooperation in factory construction and operation, buying technology, buying equipment.

VIII. Total Investment 50 million USD, Foreign Capital to be used 50 million USD. IX. Project Development:

The report of the practicality is ready.

27

No.19 Production of Cement by Rotary Kiln

I. Project Title: Production of Cement by Rotary Kiln

II. Project Entity: Shaxian Xishan Cement Co., Ltd. III. Project Managers：Lin Jinliang Tel: 0086-598-5841567

Fax:0086-598-5823091 IV. Justification of the Project and Construction Conditions:

Cement is important building materials. With the fast development of economy in our country, the demand of cement is growing at a speed of above 12%. At present, the total output of cement in our country is large while the high- grade cement produced by rotary kiln occupies a small proportion. The cement produced by rotary kiln is high in grade and stable in quality. It is suitable to be put into international market. Therefore, the construction of the production line of yearly output of 2.5million- ton cement by rotary kiln and products by rotary kiln enjoy a great potential and good development future both in inside, outside of our province, the domestic and international market.

V. Visiting purpose: Looking for foreign partners invest in new rotary kiln construction, and technical support in the operation process.

VI. Construction Scale and Content: The daily output of 5000ton clinker and 2.5million cement of 32.5R and 42.5R will be built.

VII. Total investment will be 12million USD, of which, 6 million USD of foreign fund will be expected. VIII. Analysis on Economic Results: After the project is built and reaches its designed capacity, it will bring about

the sale income of 200million RMB and profit and tax of 60million RMB, of which, the profit will be 40million RMB.

IX. Development of the Preliminary Work: The program is underway.

X. Supporting Conditions: Shaxian Xishan Cement Co., Ltd. owns years’ experience in production and sale of cement with variety of technicians and performs well.

28

No.20 Comprehensive Development of “Village Tour” at Nanxia Town, Shaxian County

I. Project Title: Comprehensive Development of “Village Tour” at Nanxia Town, Shaxian County

II. Project Entity: Fujian Cuilu Real Estate Development Co., Ltd. III. Project Managers：Chen Shengbao Tel: 0086-598-5825469

Fax: 0086-598-5825469 IV. Justification of the Project and Construction Conditions:

Located in the southeastern part of Shaxian County, Nanxia Town is 25 km away from the downtown of Shaxian County. The whole line is made of cement. It is convenient in transport. In the town, there are 2110 families, including 10747persons. The project of “Village Tour” contains the comprehensive development of Pine Rock, Lida Floating and Guanyin (the Goddess of Mercy) Mountain. Pine Rock: Located at Chapin Village, Nanxia Town, the village belongs to the landscape of small-scaled volcanic rock, which is rich in such natural scenic spots as strange stones and deep caves. The forest coverage rate reaches over 76.8% with many famous and ancient trees. In addition, the village keeps many traditional folkway culture and ancient legends. Rich and unique tourism resources earn for the village the fame of “A hilly village like a picture drawn with ink, a paradise in the world”. Lida Floating: Nanxia Town is rich in water resources with quality water. It is the water source for Shaxian No.3Water Mill (under design, not built yet). The first dock is located at Lida of Longsong Village, Nanxia Town, 20 km away from the downtown of the county. At present, 1.2million RMB has been invested into the project to build a dam and two skid lines to have completed the design and construction of the first section of floating and was on trial operation in July, 2006. Along the way the hilly flowers are blossoming and streams green and clear with a lot of adventure and excitement. Each day it may receive over 400 persons of tourists. Now it has had the capacity of receiving 200 tourists at the same time. Guanyin Mountain is located at the natural village, Nankeng, Xiyuan Village, Nanxia Town, 26 km away from the downtown of the county, only 5km away from Pine Rock. There are 22 families including 120persons in Nankeng Natural Village with simple folkways. Guanyin mountain is 1140meters above the sea level with green mountains and strange peaks and stones. It is rich in plantation with waterfall flowing and air suitable for people. It is called “Natural Oxygen Bar”.

V. Visiting purpose: Looking for foreign partners invest with us in the village tour project in terms of capital invest, management experience, operation experience, etc.

VI. Construction Scale and Content:

29

Pine Rock: Construct such infrastructure as roads, parking sites, farmer restaurants and treat the village’s hygiene to provide a clean, comfortable, natural and beautiful environment; Provide the tourists with quality humanization service through setting up the “Folkways Exhibition Hall”, a resting corner for tourists and small supermarket. Construct the tour routes of the village and develop the tourists’ products such as “Pine Rock” farmer’s dried ducks, natural eggs and tea oil to lead the villagers a wealthy life. Lida Floating: Try to get the whole route opened to traffic, complete the design and construct the second section of floating, clear up the river ways and develop the scenic spots. Make the supporting facilities perfect to solve for the tourists such problems as floating, eating, accommodation and washing to create a suitable tour resting environment. Guanyin Mountain: Complete the general program of the scenic spots of Guanyin Mountain, make infrastructure supporting, hardenize the cement surface of the tour roads, make the communication facilities perfect, build restaurants, parking sites, standardized public toilets and resting villas, collect and make up the folk tales and develop such scenic spots as Guanyin Cave, Flying Stone, Camel Peak, Shuangxiong Stone and Eagle Stone.

VII. Total investment 5million USD, of which, 3million USD of foreign fund will be utilized. VIII. Analysis on Economic Results:

After setting up the project of “Two-days Tour of Nanxia Town”, we plan to comprehensive development of such three scenic spots as Pine Rock, Lida Floating and Guangyin Mountain. Our customers could experience township customs and folkways. The yearly reception of the tourists is expected to amount to 30,000 people and the per capita comsuption of 300 RMB, which will earn income of 9 million RMB yearly. It will take 5-8 years to get back the input.

IX. Development of the Preliminary Work: The General Program of Tour Zone of Pine Rock, Shaxian County has been compiled by Chapin Village. The

cement of 23 km tour roads has been hardened and plantation made, the administrative commission has been set up. Another three farmers’ restaurants have been built, which has laid a good foundation for the village tour. In 2006, stone-piled sighting area of Pine Rock, over 300 meters of main tour walking roads, 100meter fence have been set up with the marks of roads, scenic spots, location, tour and map more perfect.

30

No.21 Production of High-grade Panel Furniture

I. Project Title: Production of High-grade Panel Furniture

II. Project Entity: Shaxian Mingfu Wood Industrial Co., Ltd. III. Project Manager: Wang Mingfu Tel: 0598-5822055

Fax: 0598-5822055 IV. Justification of the Project and Construction Conditions:

The panel furniture is welcomed mainly because it is multi-faced and can give people a sense of different colors and natures. Another characteristics of panel furniture is not easily deformed. There are more variety of designs and unique in styles of panel furniture. The largest advantage of the panel furniture may be mass-produced.. The store of the standard semi-finished lumbers is to be set up according to the standard of 32mm system. The lumbers from the semi-finished –product store may be installed into shapes according to any orders of consumers so as to mostly increase the utilization rate of lumbers. Besides, mass-production of semi-finished products may reduce the times of regulating the machines so as to increase the efficiency, reduce the cost and upgrade the quality. Scaled production of panel furniture is not only excellent in quality but also low in cost. Shaxian County has advantages related to the raw materials, product market, human resources, construction land, industrial groups, transportation & hydraulic power and green human environment and preferential polices concerned and has the conditions to develop the stretching of industrial chain. It is a golden commercial chance that create the first class brand of high-grade panel furniture.

V. Visiting Purpose: Look for cooperation partner who could assist us in setting up standard manufacture system. Look for partner who could cooperation with us in extend our production line.

VI. Construction Scale and Content: General program: The production line of yearly output of 100,000 sets of medium and high grade panel furniture is to be built. It will be implemented in phases that, in the first phase, the production line of yearly output of 50,000sets of panel furniture will be constructed. In one or two years, a standard system for production techniques is to be built. Within 5years, the upper- and- lower reach products will be expanded and a complete standard system be made, reaching the scale of yearly output of 100,000sets of medium and high grade panel furniture. An enterprise producing famous both at abroad and home, first-class high grade panel furniture and enterprise group exporting foreign-oriented panel furniture.

VII. Co-op Method: Join-Venture cooperation in manufacture operation. VIII. Total Investment 10 million USD, Foreign Capital to be used 4 million USD.

IX. Analysis on Economic Results: After it is put into production, the yearly sale income of 100 million RMB will be expected with the profit of 18.8million RMB, tax of 5.8million RMB and input rate of 22%. It will take 4-5 years to get back the input.

X. Development of The Preliminary Work: The program and compiling of feasibility study are underway. XI. Supporting Conditions: Founded in 1994, Mingfu Enterprise has owned many years’ experience in

manufacturing plywood, 6 standardized production lines for plywood with the capacity of yearly output of 40,000 m3 , integrating research, development, manufacture, sale and material flow.

31

No.22 Transformation of Production Line of Aspartic Acid

I. Project Title: Transformation of Production Line of Aspartic Acid

II. Project Entity: Shaxian Council for the Promotion of International Trade Fujian Maidan Biological Group Co., Ltd

III. Project Manager: Huang Jianfeng Tel: 0598-5823024 Fax: 0598-6822321

IV. Justification of the Project and Construction Conditions: Aspartic Acid is one of necessary amino acids maintaining the growth of human bodies. Aspartic acid can not be synthetized in animals’ bodies. It can stimulate the synthesis of phosphate and oxidation of fatty acid in organic bodies with the function of anti-fatty liver. Functioning with L-tryptophan, it can stimulate the growth of poultry. When there is not enough aspartic acid in animals, their growth will stop, weight lose, arising anaemia and fatty liver. L-aspartic acid is widely used in feed additives, at the same time, in the liquid and making agents of amino acid, strengthening agents for nutrition in foodstuff and medical middle agents. There are over 20 kinds of amino acids composing protein, of which, 8 kinds are badly needed in human bodies, can not be synthetized in human bodies, called as necessary amino acids, of which , aspartic acid is one. Besides, L-aspartic acid is a kind of amino acid necessary in human bodies and animals. It can not be synthetized itself, must be collected from food. It is widely used in the industries of feed, healthcare and medicine.

V. Visiting Purpose: Looking for foreign company invest in construction of production line transform.

VI. Construction Scale and Content: A production line of yearly output of 10000ton aspartic acid products will be built. The transformation of the back section of the existing fermentation workshop in Fujian Maidan Company, mainly the transformation of the extracting section.

VII. Co-op Method: Join-Venture cooperation in production line transform. VIII. Total Investment 5 million USD, of which, 3 million USD from foreign partner is expected.

IX. Analysis on Economic Results: According to the present market, the sale price of aspartic acid is 35000 RMB per ton. The market factors taken into consideration, counted upon 24000 RMB per ton, it will bring about the yearly sale income of 240 million RMB with production cost of 160 million RMB and yearly input of 62 million RMB.

X. Development of The Preliminary Work: The initial design has been completed and the feasibility survey is underway.

XI. Supporting Conditions: Fujian Maidan Biological Group Co., Ltd. is a foreign solely funded enterprise , the largest scaled enterprise producing L- phenylalanine in China. It has over-30 year experience in bio-chemical manufacture. It is the largest scaled enterprise manufacturing amino acids, monosodium glutamate and feed additives.

32

No.23 Develop Series Products of Phenolic Resin and Moulding Compound

I. Project Title: Develop Series Products of Phenolic Resin and Moulding Compound

II. Project Entity: Fujian Province Shaxian Hongguang Chemical Co., Ltd. III. Project Manager: Luo Zeng Suo Tel: 0086-598-5852926


Phenolic Resins are used in many areas, like making phenolic moulding compound, electrical casting resin, electrical laminates, foundry blacking, adhesives, foam plastic and friction linings etc. The new developed engineering phenolic plastic is widely used in the areas including high heat resistance and high strength resistance, such as metal substitute for automobile industry, small size motor parts, case of computer, coil bodies and power switches etc. The most advanced compositions material can be used in the missile engine nozzle and interior trim of space flights and trains etc. At the moment, there are more than 100 phenolic resin manufacturer in China, which mainly located in the coastal developed area of southeast, with annual production capability of 300000 metric tons, the actual turnover about 220000 metric tons, with 15% average growth annually; the import was keeping more than export, the import for 10000 metric tons and 58000 metric tons for export, The import will be prospected for 16% growth annually till 2010.

V. Visiting Purpose: Looking for update technical support to enhance our R&D ability, and extend our product line.

VI. Construction Scale and Content: To develop an industrial chain of high and low voltage electricity transformer and industrial automatic controlling electric device, the main developing items include high voltage distributors, low voltage distributors, complete set appliance, electric meters, construction device, explosion prevention appliance, traffic appliance etc.

VII. Co-op Method: Join-Venture cooperation in R&D. VIII. Total Investment 20 million U.S.D, foreign investment expected: 10 million U.S. D.

IX. The Analysis of Economic Efficiency: The annual sales volume prospect to reach 500 million, and bring about 200 million of taxation and profit, the returns period on static investment for 3 years not include one year of construction.

X. The Progress of Prophase: The program is under way, and the feasibility report on the development project is for further working out.

XI. The Assortment of the Project: Shaxian Hongguang Chemical Co., Ltd is a specializing manufacturer of Phenolic Moulding Compound and Urea Formaldehyde Moulding Compound, covering an area of 60000 square meters, with 300 staffs, with an annual production capability of 20000 metric tons for Phenolic and Urea, with three main products series of color powder, injection powder and electric powder totally 25 kinds of varieties, it was widely used in manufacturing daily appliance, electrical insulation parts, table ware and toys etc.

33

No.24 Mold Steel

I. Project Title: Mold Steel

II. Project Entity: Nanping Shuangyou Metal Co., Ltd. III. Project Manager: Huang Guobin Tel:0086-13805995813

Fax: 0086-599-6654666 E-mail:[email protected] IV. Justification of the Project and Construction Conditions:

Mold industry becomes an important area with the development of domestic economic. Plenty of products’ R&D relay on the mold manufacture, especially in automobile, motor, electronic product, aircraft etc. In the previous five years, the mold industry development speed in China had reached 20% per year. This figure is expected to increase in the next five years. Therefore, the market of mold steel is attractive. Base on the production of normal carbon steel, our company is cooperate with China Iron & Steel Research Institution, to develop the steel for mold manufacture.

V. Visiting Purpose: Buying equipment for the electro-slag and smithing. Looking for cooperation partners in sale mold steel products in Europe.

VI. Construction Scale and Content: We plan to invest 60 million USD, and expand our operation business in mold steel manufacture for annual output of 30,000 Tons. The main products are cold work die steels, hot mold steel, plastic mold steel.

VII. Co-op Method: Buying equipments, sale products to Europe. VIII. Total Investment 60 million U.S.D. Investment from Chinese party: 60 million USD.

IX. The Analysis of Economic Efficiency: It is expect to get the out put of mold steel for 30,000 Tons annually. The profit will be 1.5 million USD. The investment could return back after 4 years.

X. The Progress of Prophase: We have invested 10 million USD for the electro-slag remelting. In the second step, we will invest 30 million in the mold steel smithing process. The final step, we will invest 20 million for the deep manufacture of mold steel. The whole project is planned to finish in the end of 2008.

34

No.25 Development the Art & Crafts Europe Market

I. Project Title: Development the art and crafts Europe market

II. Project Entity: FUJIAN MINHOU XINHUA ARTS&CRAFTS CO.LTD III. Project Manager: Jiang Yexing TEL:0086-13788871495

FAX: 0086-591-22959129 EMALL: IV. Justification of the Project and Construction Conditions:

Our county is the important art and craft production bases of such as bamboo, wooden, iron, cane, the art and craft economy had made a lot of progress in recent years, in order to improve the develop of art and craft line, it is necessary to increase the speed of developing European market. Our company is engaged specially in handicraft research and development productions such as bamboo, wooden, cane, from setting up until now, we introduce the advanced equipment and senior technician, and we have the abilities to develop European market.

V. Visiting purpose: Look for cooperation partners in sale products in Europe.

VI. Construction Scale and Content: Plans to invest 1.2 million USD to exploit develop the European market, strives for the annual manufacture amount of 4 million USD.

VII. The total investment is 1.200 million USD; the capital is invested by our company. VIII. The analysis of economic efficiency: Annual manufacture amount of 4 million USD

IX. Initial work progress: Has completed occupies a land area of 20 Chinese acres workshops.

35

No.26 Skill Requirement for Leather Craft Manufacture

I. Project Title: Skill Requirement for Leather Craft Manufacture

II. Project Entity: Rongxin handicrafts Co, Ltd, Minhou county III. Project Managers: Hong hua Tel: 008613960962677

Fax: Email: IV. Justification of the Project and Construction Conditions:

Our company mainly handling in leather crafts. It located in Minhou county where is famous as “the handicrafts making capital in China”. Especially, since China adopted the policy of reform and opening-up, the handicrafts industry has developed rapidly. It is necessary for us to study and import new-high technology for leather handicrafts industry in order to propel the development of our handicrafts economy to a new stage.

V. Visiting purpose: Look for cooperation partner that could enhance our skill in the manufacture process.

VI. Construction Scale and Content: We plan to invest 2.0 million USD, construct a yard of 30 mu or 4.94 acres, set up a factory with an area of 200 thousand square meters and import new-high technology for leather industry.

VII. Co-op Method: Buying Import Technology VIII. Total Investment 2.0 million USD, Foreign Capital to be used 1.0 million USD, invest from Chinese party:

1.0 million USD will be invested by our company. IX. Economic Analysis:

The annual output value of this project will reach 2.0million USD. X. Project Development:

A piece of land with an area of 13mu (about 2.145acres) has been requisitioned.

36

No. 27 Joint -venture cooperation

I. Project Title: Joint -venture cooperation II. Project Entity: The Residential Mission in Italy of China Development Bank

Changzhou Zhongzhen Knit Goods Dyeing & Finishing Co., Ltd III. Project Managers: Mr. Peng Jian Tel: 3348234919 [email protected]

Mr. Ren Renhui, 3348234850, [email protected] IV. Justification of the Project and Construction Conditions:

1. With the goal to strengthen our competitive edge in the market, we would like to seek for joint-venture

business partners, introducing advanced knit goods dyeing and finishing equipment and technology as well as capital investment. We now plan to invest 10 million US dollars to elevate Zhongzhen’s production capability and technological level, making it a company with the highest volume of production, the most advanced equipment and the best-quality products in the same industry in Changzhou.

2. We propose the following ratio of investment contributions: Zhongzhen with 51% and the business partner with 49%. Zhongzhen invests with convertible foreign exchange, land and plants. The business partner can choose at its own will, investing either convertible foreign exchange or advanced equipment.

Vehicle automatic transmission II. Project Entity - Assolombarda

Documents

Transcript of Vehicle automatic transmission II. Project Entity - Assolombarda