Training Packaging Solutions - Multivac

88
Training Packaging solutions

Transcript of Training Packaging Solutions - Multivac

Training Packaging solutions

Dear customers,

The regular updating of one‘s knowledge and abilities is a key to success in the modern working environment. The world of packaging procedures is also undergoing constant change - technology continues to develop, the need for knowledge grows, and existing knowledge must be regularly refreshed and expanded.

The growing demands on today‘s packaging solutions usually mean a higher level of machine complexity, which has to be mastered easily and above all reliably. A precondition of an efficient packaging procedure is therefore the perfect interaction between man and machine - from operation to servicing. It is for this reason that MULTIVAC offers you not only reliable machines and modern technology, but also a highly informative and varied training program with unique practical relevance. Qualified staff are more motivated and take pleasure in their work.

Benefit from our know-how and put together your own individual training program from our range of training courses, which are constructed on a modular basis. Our range comprises not only standard courses, but also customized training solutions for different target groups and requirement profiles.

The training courses take place in our modern Training Center with its large range of machines at our headquarters in Wolfertschwenden, as well as at our international Training Centers worldwide. If required, we can also offer you training on your own site. In all cases you can of course have trust in the high level of standardised MULTIVAC quality, which you have come to expect from our machines.

We would be very happy to advise you on the selection of training courses, which are best suited to your needs. Simply contact us to discuss it further.

We look forward to welcoming you.

With best wishes

Stefan Scheibel

3

MULTIVAC training courses: This know-how pays off for you!

Quality, functionality and performance have the highest priority for our development engineers. But how can the potential of your packaging machine be fully utilised? How do you ensure that operation runs smoothly? And how do you ensure optimum safety?

To address these questions, we offer practical training courses for your employees. There is the widest range of course modules available, which you can book individually or in any required combination.

In addition to this, we also conduct training courses at your company and on your machines. With on-site training, the content of the course can be matched even more precisely to your requirements.

Information about the individual modules and our course dates can be found in the following pages or also on the Internet at: https://de.multivac.com/de/support/beratung/training/

4

Page

Operation and safety thermoforming packaging machines 8Pneumatics 10Electrics 12Mechanical parts and Servicing thermoforming packaging machines 14Basic principles of packaging technology 16Basic principles of robotics 18Seminar for film and tray manufacturer 20MultiFreshTM thermoforming packaging machines 22 Traysealer 26Operation and safety of slicer 28

Registration, cancellation, hotel reservation 31

On-site training The training course at your company location 32

Contact 34

Contents

KeyOn-site training The training course at your company location(Information on page 32)

5

6

7

Operation and safety Thermoforming packaging machines

The course participants are first familiarised with the safe handling of the machines. They learn step-by-step how the optimum production readiness of the MULTIVAC machine can be achieved. For the refresher of the knowledge, as well as safe and efficient operation of the machines, we recommend to refreshing this training annually.

Target group:Operators, machine supervisors, fitters and service personnel

Recommendation:None

Maximum number of participants:8

Duration: 2 days

8

Contents: · Understanding the machine safety · Switching on the MULTIVAC machine · Feeding in the film · Processes in the forming station · Web advance · Loading rules · Performing of a vacuum test · Processes in the sealing station · Setting of the register mark control · Hygiene & disinfection

Training target: The participant will be able · to detect serious, safety-relevant faults · to operate the machine independently and safely · to prepare the machine for cleaning

9

Pneumatics

This course conveys knowledge on the pneumatic system of a MULTIVAC packaging machine and its pneumatic modules.

Target group: Fitters and servicing staff

Recommendation: · Technical job or well-grounded technical understanding· Fundamental koowledge about the function of the machine· Participation on the module „Operation and safety Thermoforming Packaging

Machines“

Maximum number of participants:8

Duration:3 days

10

Contents:· Structure, function and servicing of the pneumatic modules · Reading pneumatic diagrams· Functional principle of the forming and sealing method· Vacuum technology on the MULTIVAC packaging machine· Troubleshooting in practice

Training target:The participant will be able· to explain the structure and the functions of pneumatic modules· to start up pneumatic systems safely and properly· to read and understand pneumatic diagrams· to explain the pneumatic functions of a thermoforming packaging machine

and to enter the settings on the control terminal· to check the vacuum system and set it correctly according to quality

standards· to perform a systematic error search on pneumatic modules and resolve the

error

11

Electrics

In this course, participants will become familiar with the electrical modules of a MULTIVAC packaging machine.

Target group:Service technicians, maintenance personnel

Requirement:Participants must be qualified electricians or qualified electricians for specified tasks

Recommendation:Participation in the module „Operation and safety of thermoforming packaging machines“

Maximum number of participants:6

Duration:2,5 days

12

Contents:· Function of the electrical components· Reading electrical circuit diagrams and circuit symbols· Basics of IPC controls IPC05, IPC06 and IPC07· Creation of a data backup and retrieving the flash card· Safety technology basics in relay technology and TwinSAFE· Troubleshooting in practice

Training target:The participant · is familiar with the employed electrical components, can name them and

explain their functions is familiar with the employed circuit symbols· understands the structure of electrical circuit diagrams and can read and

understand them· knows the structure and functions of the various modules of the IPC control· learns about the options for troubleshooting in the various bus systems and

consolidates this knowledge with practical experience· knows the structure of safety circuits in relay technology and TwinSAFE· can create a data backup of operating parameters, as well as retrieve a new

flash card with a previously created disk image

13

Mechanical parts and Servicing Thermoforming packaging machines

Here, the mechanical components are at the forefront. The various setting possibilities in the machine control are explained, as are the servicing and repair of modules.

Target group:Fitters and servicing staff

Recommendation: · Participation on the module „Operation and safety Thermoforming Packaging

Machines“ · Participation on the module “Pneumatics” · Participation on the module “Electrics” · Experience in diagnosis of occurred faults and whose reasons

Maximum number of participants:6

Duration:3,5 days

14

Contents: · Overview of safety systems · Preparing the cleaning · Servicing and overhaul of the pneumatic components · Servicing and diagnosis of the electric components · Explanation of chain and advance · Maintenance and adjustment of the die sets · Adjustment of the lifting units · Exchange and adjustment of cutting units · Cleaning of discharge conveyors

Training target: The participant will be able · to check safety components properly and repair them · to service and overhaul pneumatic modules · to prepare the machine properly for wet cleaning · to adjust the machine frame and the dies · to tension the chain correctly · to determine and adjust the cut-off length correction · to detect faults in the advance system and resolve them · to perform maintenance and inspection work on the dies, lifting units and

cutting units · to replace standard spare and wear parts

15

Basic principles of packaging technology

This entry-level course conveys comprehensive, basic knowledge about the packaging sector. Starting with the question of why products are packaged, the participants learn about the different packaging materials and their properties, as well as about many other subjects. The participants also gain theoretical and practical knowledge about the various types of machines, their areas of use and their methods of operation.

Target groupCustomers and potential customers, buyers and salesmen for food products and packaging, product development staff, quality assurance personnel, marketing personnel, product managers, professors and teachers, any person looking to learn more about the world of packaging

Recommendation:None

Maximum number of participants:8

Duration:2 days

16

Contents: · Why products are packaged – background on various demans on the package · With what is packaged – backgrounds on the various packaging materials · Factors detrimental to foodstuffs - Fundamentals to the packaging of food · How products behave under vacuum · MULTIVAC packaging machines · MULTIVAC packaging technologies

Training target:The participant · understands why packages are necessary · knows the requirements for a package · understands the structure of a package · is informed about the different packaging films and those characteristics · has an overview about the portfolio of MULTIVAC packaging machines and

those function · know their way around different types of MULTIVAC packaging technology

17

Basic principles of robotics

The participants of our robotic workshops get a step-by step-introduction to the functions and handling of MULTIVAC robot modules. In practical exercises in our demo booth, the participants learn the functions of single parameters as well as how to perform simple maintenance and service tasks for the daily operation of the system.The training content can be customised, depending on the participants.

Target group:Operators, line and shift leaders

Recommendation:None

Maximum number of participants:6

Duration:2 days

18

Contents: · Understanding of machine safety · Basic functions of the machine · Learning about the operating parameters · Fitting and removing the product-specific parts · Learning about the handling of blades and the blade grinding machine

Training target:The participant · will know how a slicer functions. · will be able to operate a slicer and will know about the most important

parameters for setting their own programs. · will be familiar with the associated equipment and be able to fit and

remove it. · will be aware of the dangers, which may arise from a slicer. · will know about the procedure for cleaning the machine, so that it can be

made hygienically clean again.

19

Seminar for film manufacturer

On these two seminar days we intensively focus on the different sealing and forming processes of our Thermoforming Packaing Machines. In the practical part we gladly provide film producers the opportunity to test the behaviour of your film in our machines.

Target group:Film manufacturers and persons who are interested in the behavior of pa-ckaging materials on the Thermoforming Packaging Machine

Recommendation:None

Maximum number of participants:8

Duration:2 days

Contents: · Different forming and sealing methods in theory and practice · Forming the film · Sealing (narrow upper web, wide upper web, MultiFreshTM) · Setting the parameters and personal practical exercises on different films · Chain and advance · Recognising misadjustments and settings of the cut-off-length

Training target:The participant will be able · to detect serious, safety-relevant faults · to operate the machine independently and safely · to prepare the machine for cleaning

20

Seminar for tray manufacturer

In this training day we cover the different sealing methods and trays of our Traysealers. Also here the participant has the possibility to test the behavior of his trays on our machines.

Target group:Tray manufacturer and persons who are interested in the behavior of packaging material on Traysealers

Recommendation:None

Maximum number of participants:8

Duration:1 day

Contents: · Explanation of the different sealing methods · Pressure control · Explanation of the Tray feeding systems

Training target:The participants will be able · to give setting tips on their materials in case of optimisation hints given via

telephone or at the customers‘ premises · to detect easily whether there is a operating error in case of complaints

21

MultiFreshTM thermoforming packaging machines

MULTIVAC offers special MultiFresh™ thermoforming packaging machines for the production of vacuum skin packaging. The trainer explains the structure and the complex processes in the MultiFreshTM machine. The acquired theoretical knowledge will be deepened in practical sessions. Targeted tips and information help to avoid incorrect settings and to quickly detect faults.

Target group:Mechanics and maintenance officers

Recommendation:Participant shoulod have expert knowledge about MULTIVAC Thermoforming Packaging Machines

Maximum number of participants:5

Duration:1 day

22

Contents: · Function and adjustment of the upper web unwind · Function of the upper web heating · Structure of the sealing station · Sequence of processes

Training target:The participant will be able · to change the knives in the forming station · to perform a forming depth adjustment · to detect defects on the upper web unwind and perform the correct settings · to set the upper web heating station correctly · to understand the processes in the sealing station in detail · to recognise misadjustments and perform settings · to recognise technical faults and resolve them · to recognise faults in daily operation and find solutions

23

24

25

Traysealer

Traysealer training courses are matched individually to your machine, the complexity of the application and the level of your employees knowledge. For example, training on the pneumatic, electrical and mechanical elements can be given from the basic level upwards. If your employee already have prior knowledge of Thermoforming Packaging Machines, we are able to supplement the existing knowledge with information relating to Traysealers.

Target group:Operators, fitters and servicing staff

Recommendation:None

Maximum number of participants:8

Duration:1 – 3 days, depending on the chosen contents

26

Contents:Function and operation · Explanation of the design features and functioning principle · Operation and safety · Format change · Creation of recipes · Sealing method · Information on troubleshootingElectrics · Diagnostic possibilities oft he cutting drivesMechanical parts · Film unwinds · Lifting units · Dies · Cutting unitsService notes

If traysealer customers are interested in pneumatic and / or electrical topics they can also book the „Pneumatic“ module (page 10) and the „Electric“ module (page 12). This course deals with all pneumatic and electric compo-nents which are built in a thermoforming packaging machine.

Training target:The participant · will know the design features and the functions of different traysealer types · will be able to set up the machine from scratch and operate it · will be able to perform service and installation work independently thanks to

the information on maintenance and installation · will know the possibilities on diagnosing Schneider drives

27

Operation and safety of slicers

In this course the participants are familiarised with the safe handling of MULTIVAC slicers.

Target group:Operators, line and shift leaders

Recommendation:None

Maximum number of participants:6

Duration:2 days

28

Contents:· Understanding of machine safety· Basic functions of the machine· Learning about the operating parameters· Fitting and removing the product-specific parts· Learning about the handling of blades and the blade grinding machine

Training target:The participant· will know how a slicer functions.· will be able to operate a slicer and will know about the most important

parameters for setting their own programs.· will be familiar with the associated equipment and be able to fit and remove it.· will be aware of the dangers, which may arise from a slicer.· will know about the procedure for cleaning the machine, so that it can be

made hygienically clean again.

29

30

Registration

Is made through personal contact by e-mail with our training team. Due to high demand, there could be waiting times for training, so please contact us at least three months before the start of the training you are planning.

Hotel reservation

We are happy to make the hotel reservations on your behalf at MULTIVAC rates in one of our partner hotels. The costs for hotel and travel are not included in the training course fee.

Cancellation

A cancellation is possible free of charge up to 2 weeks before the training starts. In case of cancellations made between 14 and 8 days before the training starts, 50% of the course fee will be charged.In case of cancellation 7 days or less before the training starts or if the partici-pant does not appear, the full course fee will be charged.

Registration, cancellation, hotel reservation

31

On-site training The training course in your company (for packaging machines or system-lines)

Tailored to your requirements

We match our training courses exactly to the special circumstances in your company. Depending on the level of knowledge and the specific tasks of your employees, our courses are also precisely tailored to your range of machines. This creates maximum results with a minimum expenditure.

The training course content in both theory and practice is delivered right to your MULTIVAC packaging machine/system-line.

If you are interested in a training, please us the online provided form at https://de.multivac.com/de/support/beratung/training and send it by e-mail to [email protected] or by fax to +49 8334 601-4414312.

Thereupon you will receive a nonbinding quotation for an on-site-training which will be individually tailored to your specific requirements.

What has to be taken into consideration?

Important for a successful training course is: · A MULTIVAC machine/system-line which is freed up, · A conference room, with a projector if possible · The unrestricted availability of the participants · Groups with a maximum of ten participants ensure that optimum learning

success is achieved

32

Line training

Step 1 (on-site only)Training of the packaging machine/handling modules... (line)Duration: 5 days

Optional: Training week 2 production support (more-in-depth coverage of what has been learned under actual production conditions. Please note that production is limited)Duration: 3 days

Step 2 (after 3 months at the earliest)Visit to production (duration: 1 day)Presentation of the potential for improvement in the processes and, on the basis of this, advanced operator training (duration: 2 days)Submission of recommendations of further measures for step 3

Step 3Advanced course and associated context in the packaging procedure, focus on processes, including those upstream and downstream from the MULTIVAC components

Packaging machines

Step 1Operator training for thermoforming packaging machinesLocation: MUWO operator training with mixed customer base (duration: 2 days) or custom-tailored on-site operator training (duration: 1 day)

Step 2 (after 3 months at the earliest)Visit to production (duration: 1 day)Presentation of the potential for improvement in the processes and, on the basis of this, advanced operator training (duration: 1 day)Submission of recommendations of further measures for step 3

Step 3Advanced course and associated context of the packaging procedureFocus on processes, including those upstream and downstream from the MULTIVAC components

MULTIVAC Training courses

Whether the training course takes place in the MULTIVAC Training & Innovation Center in Wolfertschwenden or on site at your machine, we offer you practically based training courses for your MULTIVAC packaging solutions.

Please note that our standard course times are from 08:00 am to 04:00 pm.Different course times will be communicated to you.

34

If you have any questions about our training coursesMrs Stephanie Kirchensteiner will be pleased to answer them. You can contact her at

Tel. +49 8334 601-14312Fax +49 8334 601-4414312E-mail [email protected]

35

© MULTIVAC 3/2020 · Subject to technical changes in line with product development · MULTIVAC is a registered trade name of MULTIVAC Sepp Haggenmüller SE & Co KGwww.multivac.com

Training Labelling, marking and inspection solutions

Quality, functionality and performance have the

highest priority for our development engineers.

But how can the potential of your machine be fully

exploited? How do you ensure operation runs

smoothly? How do you ensure optimum safety?

Our training experts answer these questions for you.

You will become familiar with the reliable handling of

MULTIVAC labelling, marking and inspection solutions.

You will learn how the optimum production readiness

of your labellers, printers and inspection systems can

be achieved step-by-step. Practical information and

tips help to avoid operating errors, and to quickly

detect and rectify faults.

3

4

Training courses at MULTIVAC Marking & Inspection

... know how it works!

A training course in our factory in Enger offers the advantage, that technicians can devote themselves to their training in a concentrated way, if they have been relieved of the demands of their regular duties.

In addition to this, critical situations can be simulated, which are often not possible in running production.

5

Training courses at MULTIVAC Marking & Inspection

This know-how pays off for you!

· Current machine models, as well as older generations of machine controls, are used for training purposes. All training is tailored to teaching basic principles, operating sequences and structured fault-finding

· Modern training and presentation techniques · Small course groups - Maximum of 4 participants per course · Individual training programs to meet specific requirements · In-depth documentation

6

Page

Labelling and marking solutions CL2_v1 – CL 2xx Integrated Cross Web Labeller 11CL5_v1 – MR 6x5 Integrated Cross Web Labeller 13CL3_v1 – MR 6x5 Integrated Cross Web Labeller (TWIN) 15CL4_v1 – MR 6x5 Non-Integrated Controller 16CB1_v1 – L 3xx Conveyor Belt 17CB2_v1 – L 3xx Conveyor Belt (Customized) 18DP1_v1 – DP 2xx Direct web printer 19PR1_v1 – MULTIVAC TTO-Thermal Transfer Printer 20PR1.1_v1 – MULTIVAC TTO-Printer Layout Software 21PR1.2_v1 – MULTIVAC TTO-Printer Network Router 22PR2_v1 – Customer-Specific Printer 23

Inspection solutions IX1_v1 – I 1xx X-Ray System (Level1) 24IC1_v1 – I 2xx Checkweigher (Level1) 25IC2_v1 – I 2xx Checkweigher (Level2) 26ICB_v1 – _connect.BRAIN 27IM1_v1 – I 3xx Metal detector 28IM2_v1 – Metal detector with CEIA detection coil 29IV1_v1 – I 4xx Vision-System (Level1) 30IV2_v1 – I 4xx Vision-System (Level2) 31IV3_v1 – I 4xx – MULTIVAC Vision System (Level3) 33

Contact Travel and accommodation 34Information and bookings 35

Courses

7

10

CL2_v1 – CL 2xx Integrated Cross Web Labeller (0,5 days)

For operators and service technicians

The course objectives:The aim of the training is to operate the cross-web labeller independently and reliably. The participants are provided with format, operator settings and recipe management. The participants know the meaning of the basic settings. They are able to make settings on the terminal of the IPC computer. The participants will learn how to systematically localize faults and rectify them.

The course contents:· Different types of CL 2xx Cross web labeller· Different label sensors· Format setting· Operator setting· Recipe management· Basic settings· Circuit diagrams and Troubleshooting· Causes of faults

11

12

CL5_v1 – MR 6x5 Integrated Cross Web Labeller (2,5 days)

For operators and service technicians

The course objectives:The aim of the training is to operate the cross-web labeller independently and reliably. The participants are provided with format, operator settings and recipe management. The participants know the meaning of the machine constants. They are able to make settings on the terminal of the IPC computer. The participants will also learn to independently perform software updates on the LC 140. The participants will learn how to systematically localize faults and rectify them.

The course contents:· Type codes· Test and measurement runs· Different label sensors· Format setting· Operator setting· Recipe management· Machine constants for the labeler· Circuit diagrams and Troubleshooting· Software update LC 140· Causes of faults

13

14

CL3_v1 – MR 6x5 Integrated Cross Web Labeller (TWIN) (0,5 days)

For operators and service technicians

Prerequisites for admissionCL5_v1 – MR 6x5 Integrated Cross Web Labeller

The course objectives:The participant of the training is learning to operate the cross web labeler independently and safely. After the course the participant will know the different modes of the Twin labeler and how to handle them.

The course contents:· Cross web labeller with Twin option· Safety controller DINA· Operation modes· Teaching the safety controller· Format setting· Operation setting· Hardware changes

15

CL4_v1 – MR 6x5 Non-Integrated Controller (depending on the training content)

For operators and service technicians

The course objectives:Setting and configuration of a labelling system witch is not controlled by IPC (ML 100, LC 140, LC 100 ,HI 000, HI 208)

The course contents: · Different controllers (ML 100, LC 140, LC 100) · Different terminals (HI 000, HI 208) · Test and measurement runs · Format setting · Operator setting · Job management · Job variables and machine constants

16

CB1_v1 – L 3xx Conveyor Belt (2 days)

For operators and service technicians

The course objectives:The objective of the training is to be able to operate the labeler independently and safely. The Participant get to know the different versions of label dispen-sers and transport conveyors. The training includes the operation of the labeler via HMI 2.0 user interface of the MULTIVAC IPC control. The participants will learn how to systematically localize faults and use the WebServer for diagnosis.

The course contents:· Mechanical construction and electrical circuitry· Different label dispenser (LD 1xx/LD 2xx)· Start-up and setting of the individual aggregate units: labeler, SM modules,

AC drives, label sensors etc.· Tests and causes of faults

17

CB2_v1 – L 3xx Conveyor Belt (Customized) (2 days)

For operators and service technicians

The course objectives:The objective of the training is to be able to operate the customer specific labeler independently and safely. The Participant get an update of their know-ledge about conveyor belt labelers, as well as they get information about start-up, configuration, and particularities of their customer conveyor belt labeler.

The course contents: · Mechanical construction and electrical circuitry of the customized L 3xx · Start-up and setting of the individual aggregate units: labeler, SM modules,

AC drives, label sensors, code readers, etc. · Configuration of the customized L 3xx · Tests

18

DP1_v1 – DP 2xx Direct web printer (1 day)

For operators and service technicians

The course objectives:The objective of the training is to be able to operate the direct web printer independently and safely. Basic settings and job management will also be taught to the course participants. The participants will learn how to systematically localise faults.

The course contents:· Type codes· Mechanical construction and electrical circuitry· LC and IC versions· Positioning of the print· Continuous/intermittent print· Circuit diagrams

19

PR1_v1 – MULTIVAC TTO-Thermal Transfer Printer (1 day)

For operators and service technicians

The course objectives:The participant of the training is learning the basics of thermo transfer printing. The components of the TTO printer are discussed. Different settings in the HMI 2.0 are explained, as well as the fitting of spare parts.

The course contents:· Basic of thermos transfer printing· Structure of the TTO printer· Operation with HMI 2.0· Software updates and configuration tool· Function and interfaces· Replacing of spare parts and consumable material· Optimization of the print and mechanical adjustments

20

PR1.1_v1 – MULTIVAC TTO-Printer Layout Software (0,5 days)

For operators and service technicians

Prerequisites for admissionPR1_v1 – MULTIVAC TTO-Thermal Transfer Printer

The course objectives:The participant will be able to create layouts, as well as check and print them.

The course contents: · Configuration of the software on the computer · Basic layout setting · Definition of the interface for transferring the layout to the printer · Creating different variables (date, input and graphic boxes, barcodes, etc.) · Transfer of the layout to the selected printer

21

PR1.2_v1 – MULTIVAC TTO-Printer Network Router (0,5 days)

For service technicians

Prerequisites for admissionPR1_v1 – MULTIVAC TTO-Printer

The course objectives:The course participant is able to install and configure an industrial network router (Weidmueller/mGuard)

The course contents:Following consultation and agreement, can be given on various network router modules: · Installation · Setting · Interfaces · Maintenance

22

PR2_v1 – Customer-Specific Printer (depending on the training content)

For operators and service technicians

The course objectives:The course participant can operate the printer, on which the training has been given, independently and faultlessly. He can design layouts and carry out servicing.

The course contents:Following consultation and agreement, can be given on various printer modules: · Settings · Interfaces · Print layout design · Servicing

23

IX1_v1 – I 1xx X-Ray System (Level1) (3 days)

For operators and service technicians

The course objectives:The course participant gets to know the dangers and statutory provisions of operating X-ray inspection systems. Participants will learn the basics of detection of contaminated products, as well as become familiar with the independent and safe operation of an I 1xx.

The course contents:· Dangers and statutory regulations of ionising radiation· Components of X-ray inspection systems· Safety circuits· Setting the search sensitivity · Teaching new products· Settings of standard filter chains

24

IC1_v1 – I 2xx Checkweigher (Level1) (2 days)

For operators and service technicians

The course objectives:The course participant gets to know the construction of a checkweigher.Different selection criteria will be familiar to him.Another objective of the training is the teaching and management of different products.

The course contents:· Basic settings of the system· Teaching of products· Product management· I/O mapping· Different selection criteria

25

IC2_v1 – I 2xx Checkweigher (Level2) (2 days)

For service technicians

Prerequisites for admissionIC1_v1 – I 2xx Checkweigher (Level1)

The course objectives:The course participant gets to know the hardware and the exchange of electrical components. The calibration of the scale will be familiar to him.Another objective of the training are the software updates, as well as the troubleshooting.

The course contents: · Hardware I 2xx · Exchange of electrical components · Software updates · Calibration of the scale · Troubleshooting

26

ICB_v1 – _connect.BRAIN (2 days)

For service technicians

Prerequisites for admissionIC1_v1 – I 2xx Checkweigher (Level1)

The course objectives:The course participant gets to know the installation of the software.Server and connection settings will be familiar to him.The generation of statistic data using various interface options is also part of the training.

The course contents: · Installation of the software · Connection settings · Server settings · 2file · 2DB

27

IM1_v1 – I 3xx Metal detector (2 days)

For operators and service technicians

The course objectives:The course participant gets to know the basics of detecting metal contentin products. Training will focus on independent and safe operation of metal detection equipment. Audit settings will be familiar to him.

The course contents:· Basics of detection of contaminated products· Operation· Interfaces· Teaching of products· Job management· Audit settings· Software update

28

IM2_v1 – Metal detector with CEIA detection coil (2 days)

For operators and service technicians

The course objectives:The course participant will be able to operate a metal detector with CEIA detection coil safely and independently. He is familiar with the MD test and the fail-safe test. The creation and teach-in procedure for a new product are also the aim of the training.

The course contents:· Different components of a CEIA Metal Detector· Various controls of a CEIA Metal Detector· Operation· Teach-in procedure for products· Product management· MD-Test & Fail-Safe Test· System backup and recovery · Web server

29

IV1_v1 – I 4xx Vision-System (Level1) (1 day)

For operators and service technicians

The course objectives:The participants get to know the layout and design of the visual inspection systems I 410 / I 420 demonstrated on an I 410. They become familiar with various types of visual inspection.The training includes the operation via the user interface HMI 2.0 of the MULTIVAC IPC control as well as the teach-in of different products.The participants learn the basics of parameterization for various functional principles. These are: Pattern recognition, spot detection, text verification and various barcode recognitions.

The course contents:· Fundamentals of optics· Hardware and software of the I 410 / I 420· Pattern recognition· Spot detection· Verification of text fields· Recognition of various barcodes· Recipe management

30

IV2_v1 – I 4xx Vision-System (Level2) (1,5 days)

For operators and service technicians

Prerequisites for admissionIV1_v1 – I 4xx Vision-System (Level1)

The course objectives:The participants get to know the layout and design of the visual inspection systems I 410 / I 420 demonstrated on an I 410. They become familiar with various types of visual inspection. The training includes the operation via the user interface HMI 2.0 of the MULTIVAC IPC control as well as the teach-in of different products. The participants learn the basics of parameterisation for various functional principles. These are: Pattern recognition, spot detection, text verification and various barcode recognitions.Adjusting the optical system of the camera and storing the settings for image processing are also goals of this training.

The course contents: · Fundamentals of optics · Hardware and software of the I 410 / I 420 · Adjusting the optical system · Configuration of the image source · Calibration of the camera system · Data storage · Pattern recognition · Spot detection · Verification of text fields · Recognition of various barcodes · Recipe management

31

32

IV3_v1 – I 4xx – MULTIVAC Vision System (Level 3) (1 day)

For service technicians

The course objectives:The aim of the training is to get to know further optical system components and to work out their specific parameters. Basic knowledge is deepened and new aspects are added. The participants know the importance the settings to be made. They are able to make settings on the terminal of the machine IPC as well as in the Vision IPC. They learn how to systematically locate and eliminate errors.

The course contents: · Optical sensor technology and its handling · SOPAS Engineering Tool · Matrix camera OIC-3x · Basic settings color camera · Rollstock machine-specific settings · Multi-Camera Systems · Error Causes · Circuit diagrams and troubleshooting

33

Travel and accommodation

Registration: Are you interested in a training course? If so, contact our Training Department as early as possible so that we can confirm your desired date. Due to high demand, there are often waiting times which you should take into account in your plans.

A training course, which has already been booked, can be cancelled on your part without charge up to 10 days before the start of the course. If a course is cancelled after the 10 day grace period, there will be a € 50 cancellation fee for each training day, per participant.

We are happy to make the hotel reservation(s) on your behalf at MULTIVAC rates in one of our partner hotels. The costs for hotel and travel are not included in the training course fee.

16 km from Enger: 7 km from Enger:

Best Western Plus Hotel OstertorOsterstraße 52-54D-32105 Bad Salzuflen

Tel. +49 5222 98388-0Fax +49 5222 98388-100www.hotel-ostertor.com

Parkhotel SonnenhausBorriesstraße 29D-32257 Bünde

Tel. +49 5223 49113-0Fax +49 5223 49113-33www.parkhotel-sonnenhaus.eu

34

We offer you practical training courses for your MULTIVAC labelling, marking and inspection solutions.

If you have any questions about our training courses, or would like to book a training course immediately, our colleague Martin Töniges is always available to help.

Martin Töniges

Tel. +49 5224 931-203Fax +49 5224 931-299E-mail [email protected]

Information and bookings

35

www.multivac.com© MULTIVAC 03/2020 Subject to technical changes in line with product development. MULTIVAC is a registered trade name of MULTIVAC Sepp Haggenmüller SE & Co KG

Training Portioning solutions

Page

TAC – TVI's Training and Application Center 4

Training process 5Module 1 – Basics 6Module 2 – Safety 6Module 3 – Software and machine operation 7Module 4 – Calibration and putting equipment into service 7Module 5 – Maintenance 8Module 6 – Cleaning 8Individual training structure 9Training documents and tests 9

TVI Training Center 10

Your contact with TVI-TAC 11

Contents

3

RAINING &PPLICATIONENTER

TAC

TAC – TVI's Training and Application Center

TVI is a leading manufacturer of meat portioning machines and complete portioning lines, as well as equipment for all aspects of tempering, freezing, forming, portioning, automating, winding and skewering. TVI offers a range of training courses, allowing your staff to perform these production procedures safely, reliably and confidently. The aim is to impart knowledge that helps to benefit production and optimise yield.

4

Training process

Module structure

The training takes place in five modules, which are tailored to the requirements of your staff:

ASR 300

GMS 1600

Module 4Calibration and putting equipment into service

Module 3Software and

machine operation

Module 2Safety

Module 5Maintenance

Module 6Cleaning

GMS 520

Module 1Basics

5

The focus of this module is the construction and functioning of the machine. This module is suitable for those wanting to gain a rough overview of the machine.

This module is a precondition for operating the machine. It deals with all aspects of safety measures, personal protective equipment and safe handling of knives on the equipment. Also, the design of the machine's safety features is demonstrated, as well as the measures to be taken, if it has to be operated at its limits. What to do in an emergency? TVI provides a clear catalogue of measures which will enable your staff to master tricky situations.

Module 1 – Basics

Module 2 – Safety

6

This module is directed at staff of the MULTIVAC subsidiaries, as well as TVI service technicians and application engineers. The aim of the training is for staff to be able to calibrate the machine when first putting the equipment into service.

Module 4 – Calibration and putting equipment into service (only for MULTIVAC subsidiaries)

The aim of the training is to ensure your staff can operate the equipment on their own, as well as change and create recipes and programs. Optimised for trim or precise in weight? TVI machines produce the highest level of product quality at maximum efficiency, which can be further optimised by your staff, after they have enrolled for this module. We teach them how maximum yield can be achieved, while also being very sparing with resources. After they have signed up for this module, your staff will be trained to become production managers for the TVI machine.

Module 3 – Software and machine operation

7

Thorough and regular cleaning is a precondition for faultless product quality and a long machine lifespan. We pass on our know-how to your staff, ensuring your internal knowledge management has a sound basis, particularly as regards service suppliers or frequent changes of cleaning personnel.

Module 6 – Cleaning

Which components must be maintained, and when and how? Which modules must be removed to facilitate this? Module 5 gives answers to these questions. The TVI trainers have handy tips to bring the maintenance of your TVI machine to the next level.

TVI reserves the right to adapt the module structure to the scope of the training requirement for the specific machine.

Module 5 – Maintenance (only for MULTIVAC subsidiaries)

8

If preferred, the content of the training can be individually tailored to your particular requirements.

As part of every training course, comprehensive documentation is provided for the participants, including a brief overview of all the safety aspects, which can be used for further internal training of staff. The training on machine cleaning is also given in a documented form, which is suitable for passing on the knowledge to others. This means your internal knowledge management is always complete and able to support any briefing of outside service suppliers.

When the training is completed, the participants must subject their newly gained knowledge to an examination. After they have successfully passed the test, the participants receive a certificate to illustrate their competence.

Individual training structure

Training documents and tests

9

The TAC team would be very pleased to pass on their knowledge to you and your staff, either at the Training and Application Center or on site in your production.

Both alternatives offer benefits for your company:

TVI Training Center

In the Training Center at TVI in Bruckmühl

With you on site

· Without any interruptions

· In an undisturbed environment

· Simulated troubleshooting with elimination of faults

· Equipment can be tested to its full extent

· Tests and portioning models tailored to your product

· Portioning tests in conjunction with downstream MULTIVAC packaging machines

· TVI application engineers travel worldwide, to your production site as well

· Demonstrations on site under real conditions and with specific production processes

· Rental of machines and equipment for tests at your production site

· Test a TVI machine incorporated into your production process

10

Your contact with TVI-TAC

Margarethe Eham

Tel. +49 8062 72580-318E-mail [email protected]

Margarethe Eham will be happy to answer your questions.

11

www.tvi-gmbh.de© TVI 03/2020 · In keeping with improvements, designs and specifications are subject to change without notice · TVI is a company of the MULTIVAC Group