TIÊU CHUẨN MỚI THÁNG 01/2016
-
Upload
khangminh22 -
Category
Documents
-
view
1 -
download
0
Transcript of TIÊU CHUẨN MỚI THÁNG 01/2016
TRƯỜNG ĐH CÔNG NGHIỆP TP. HỒ CHÍ MINH
TRUNG TÂM THÔNG TIN – THƯ VIỆN
TIÊU CHUẨN MỚI THÁNG 01/2016
Mục lục
ĐO LƯỜNG VIỆT NAM (ĐLVN) ........................................................... 3
QUY CHUẨN KỸ THUẬT QUỐC GIA (QCVN) .................................... 3
AN TOÀN LAO ĐỘNG ................................................................................................ 3
ĐỘNG CƠ MÔTÔ ........................................................................................................ 3
GIAO THÔNG............................................................................................................... 3
TIÊU CHUẨN QUỐC GIA (TCVN) .......................................................... 3
QUẢ - RAU .................................................................................................................... 3
CACAO .......................................................................................................................... 4
TINH BỘT ..................................................................................................................... 4
LÚA MÌ .......................................................................................................................... 4
MỠ VÀ DẦU ĂN. HẠT CÓ DẦU ................................................................................ 5
MUỐI .............................................................................................................................. 5
THỰC PHẨM - PHỤ GIA THỰC PHẨM .................................................................. 5
VI SINH VẬT ................................................................................................................ 7
THỨC ĂN CHĂN NUÔI .............................................................................................. 7
THIẾT BỊ KHAI THÁC THỦY SẢN – HÀNG HẢI ................................................. 7
PHÂN BÓN .................................................................................................................... 8
MÁY LÂM NGHIỆP .................................................................................................... 8
TIÊU CHUẨN NƯỚC NGOÀI ................................................................... 8
CÔNG NGHỆ THÔNG TIN ........................................................................................ 8
ĐIỆN – ĐIỆN TỬ- THIẾT BỊ ...................................................................................... 9
CÁP ĐIỆN .................................................................................................................... 11
GIAO THÔNG - VẬN TẢI ........................................................................................ 11
MÁY BAY .................................................................................................................... 12
CƠ KHÍ - CHẾ TẠO ................................................................................................... 12
CẦN TRỤC .................................................................................................................. 13
LUYỆN KIM ................................................................................................................ 13
XÂY DỰNG - VẬT LIỆU XÂY DỰNG .................................................................... 14
2
SƠN VÀ VECNI .......................................................................................................... 15
PHÕNG THÍ NGHIỆM .............................................................................................. 16
CHẤT DẺO .................................................................................................................. 16
CAO SU ........................................................................................................................ 16
DẦU MỎ....................................................................................................................... 17
NHIÊN LIỆU SINH HỌC RẮN ................................................................................. 17
GỖ - SẢN PHẨM GỖ ................................................................................................. 17
GỐM SỨ - THỦY TINH ............................................................................................. 17
GIẤY ............................................................................................................................. 18
GỖ ................................................................................................................................. 18
Y TẾ - THIẾT BỊ Y TẾ .............................................................................................. 18
MÁY LỌC NƯỚC ....................................................................................................... 18
CHẤT LƯỢNG ĐẤT .................................................................................................. 18
MÔI TRƯỜNG – AN TOÀN ..................................................................................... 19
PHÓNG XẠ .................................................................................................................. 19
ÂM HỌC ...................................................................................................................... 19
DỤNG CỤ ĐO.............................................................................................................. 19
TIÊU CHUẨN ASTM HỦY KHÔNG CÓ THAY THẾ ........................ 20
3
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
ĐO LƯỜNG VIỆT NAM (ĐLVN)
Trở về đầu trang
1 ĐLVN 253:2015 Đồng hồ khí công nghiệp. Quy trình kiểm định 17
2 ĐLVN 283:2015 Thước vạch chuẩn. Quy trình hiệu chuẩn 15
3 ĐLVN 285:2015 Quả cân cấp chính xác E1và E2. Quy trình hiệu
chuẩn
16
4 ĐLVN 286:2015 Quả cân cấp chính xác F1, F2và M1. Quy trình hiệu
chuẩn
14
QUY CHUẨN KỸ THUẬT QUỐC GIA (QCVN)
AN TOÀN LAO ĐỘNG
Trở về đầu trang
5 QCVN 10 : 2015/BCT Quy chuẩn kỹ thuật quốc gia về yêu cầu thiết kế cửa
hàng xăng dầu trên mặt nước
9
6 QCVN 20:
2015/BLĐTBXH
Quy chuẩn kỹ thuật quốc gia về an toàn lao động đối
với sàn nâng dùng để nâng người
9
7 QCVN 21:
2015/BLĐTBXH
Quy chuẩn kỹ thuật quốc gia về an toàn lao động đối
với hệ thống lạnh
7
8 QCVN 22:
2015/BLĐTBXH
Quy chuẩn kỹ thuật quốc gia về an toàn lao động đối
với hệ thống đường ống dẫn khí đốt cố định bằng
kim loại
8
9 QCVN 25 :
2015/BLĐTBXH
Quy chuẩn kỹ thuật quốc gia về an toàn lao động đối
với xe nâng hàng sử dụng động cơ, có tải trọng từ
1.000kg trở lên
7
ĐỘNG CƠ MÔTÔ
Trở về đầu trang
10 QCVN 90 :
2015/BGTVT
Quy chuẩn kỹ thuật quốc gia về động cơ sử dụng cho
môtô, xe máy điện
13
GIAO THÔNG
Trở về đầu trang
11 QCVN 40 :
2015/BGTVT
Quy chuẩn kỹ thuật quốc gia về trung tâm sát hạch
lái xe cơ giới đường bộ
21
TIÊU CHUẨN QUỐC GIA (TCVN)
QUẢ - RAU
Trở về đầu trang
12 TCVN 10918:2015 Nấm khô 8
13 TCVN 10919:2015 Rau quả dầm 13
4
14 TCVN 10920:2015 Nho tươi. Hướng dẫn bảo quản lạnh 12
15 TCVN 10921:2015 Bơ quả tươi. Hướng dẫn bảo quản và vận chuyển 10
16 TCVN 10922:2015 Nấm trồng. Hướng dẫn bảo quản và vận chuyển lạnh 7
17 TCVN 10923:2015 Rau diếp. Hướng dẫn làm lạnh sơ bộ và vận chuyển
lạnh
8
18 TCVN 10924:2015 Rau ăn củ. Bảo quản và vận chuyển lạnh 8
19 TCVN 10925:2015 Dưa quả tươi. Bảo quản và vận chuyển lạnh 7
20 TCVN 10926:2015 Đậu quả xanh. Bảo quản và vận chuyển lạnh 7
CACAO
Trở về đầu trang
21 TCVN 11033:2015 Sản phẩm cacao. Xác định hàm lượng nitơ tổng số và
tính hàm lượng protein thô. Phương pháp
KJELDAHL
11
22 TCVN 11034:2015 Sôcôla sữa. Xác định hàm lượng protein sữa.Phương
pháp KJELDAHL
12
23 TCVN 11035:2015 Sôcôla sữa. Xác định hàm lượng fructose, glucose,
lactose, maltose và sucrose. Phương pháp sắc ký lỏng
9
24 TCVN 11036:2015 Sản phẩm cacao. Xác định hàm lượng axit pectic 14
25 TCVN 11037:2015 Sản phẩm cacao. Xác định hàm lượng theobrom và
cafein. Phương pháp sắc ký lỏng
8
26 TCVN 11038:2015 Sản phẩm sôcôla. Phương pháp phát hiện alginat 8
TINH BỘT
Trở về đầu trang
27 TCVN 11079:2015 Bột của hạt có dầu. Xác định protein hòa tan trong
dung dịch kali hydroxit
11
28 TCVN 11210:2015 Bột mì (Triticum aestivum L.). Xác định tinh bột hư
hỏng bằng phương pháp đo ampe
17
29 TCVN 11211:2015 Bột mì (Triticum aestivum L.). Xác định tính lưu
biến dưới dạng hàm số của quá trình nhào trộn và sự
gia tăng nhiệt độ
41
30 TCVN 7848-1:2015 Bột mì. Đặc tính vật lý của khối bột nhào. Phần 1:
Xác định độ hấp thụ nước và tính lưu biến bằng
farinograph
34
31 TCVN 7848-2:2015 Bột mì. Đặc tính vật lý của khối bột nhào. Phần 2:
Xác định đặc tính lưu biến bằng extensograph
21
LÚA MÌ
5
Trở về đầu trang
32 TCVN 11207:2015 Các sản phẩm protein lúa mì bao gồm gluten lúa mì 9
33 TCVN 11208:2015 Lúa mì, lúa mì đen và bột của chúng, lúa mì cứng,
tấm lõi lúa mì cứng.Xác định chỉ số rơi theo hagberg-
perten
20
34 TCVN 11209:2015 Lúa mì.Xác định chỉ số lắng.Phép thử zeleny 17
35 TCVN 6095:2015 Hạt lúa mì (Triticum aestivum L.). Các yêu cầu 20
MỠ VÀ DẦU ĂN. HẠT CÓ DẦU
Trở về đầu trang
36 TCVN 6122:2015 Dầu mỡ động vật và thực vật. Xác định chỉ số iôt 15
37 TCVN 6126:2015 Dầu mỡ động vật và thực vật. Xác định chỉ số xà
phòng hóa
15
38 TCVN 11080:2015 Dầu mỡ động vật và thực vật. Xác định trị số
hydroxyl bằng phương pháp axetyl hóa
9
39 TCVN 11081:2015 Hạt có dầu. Xác định hàm lượng dầu. Phương pháp
chiết lỏng siêu tới hạn (SFE)
14
MUỐI
Trở về đầu trang
40 TCVN 3974:2015 Muối thực phẩm 13
THỰC PHẨM - PHỤ GIA THỰC PHẨM
Trở về đầu trang
41 TCVN 10911:2015 Thực phẩm. Xác định các nguyên tố vết. Xác định
natri và magie bằng đo phổ hấp thụ nguyên tử ngọn
lửa (AAS) sau khi phân hủy bằng vi sóng
17
42 TCVN 10912:2015 Thực phẩm. Xác định các nguyên tố vết. Xác định
asen, cadimi, thủy ngân và chì bằng đo phổ khối
lượng plasma cảm ứng cao tần (ICP-MS) sau khi
phân hủy bằng áp lực
22
43 TCVN 10913:2015 Thực phẩm. Xác định các nguyên tố vết. Xác định
thiếc bằng đo phổ hấp thụ nguyên tử ngọn lửa và đo
phổ hấp thụ nguyên tử dùng lò graphit (FAAS và
GFAAS) sau khi phân hủy bằng áp lực
19
44 TCVN 10914:2015 Thực phẩm. Xác định các nguyên tố vết. Xác định
thiếc bằng đo phổ khối lượng plasma cảm ứng cao
tần (ICP-MS) sau khi phân hủy bằng áp lực
14
45 TCVN 10915:2015 Thực phẩm. Xác định hàm lượng kẽm.Phương pháp
quang phổ hấp thụ nguyên tử
14
46 TCVN 10916:2015 Thực phẩm. Xác định các chất khoáng trong thức ăn
công thức và thực phẩm dinh dưỡng đặc biệt.Phương
13
6
pháp quang phổ hấp thụ nguyên tử
47 TCVN 10917:2015 Thực phẩm. Xác định hàm lượng selen. Phương pháp
huỳnh quang
9
48 TCVN 10989:2015 Sản phẩm nông sản thực phẩm. Thiết kế tiêu chuẩn
lẫy mẫu từ lô hàng
33
49 TCVN 10990:2015 Thực phẩm. Nguyên tắc lựa chọn và tiêu chí đánh giá
xác nhận các phương pháp nhận biết giống sử dụng
axit nucleic đặc thù
20
50 TCVN 10991:2015 Thực phẩm. Xác định neohesperidin-dihydrochalcon 14
51 TCVN 10992:2015 Thực phẩm. Xác định acesulfame-k, aspartame,
neohesperididine-dihydrochalcone và saccharin.
Phương pháp sắc ký lỏng hiệu năng cao
25
52 TCVN 10993:2015 Thực phẩm. Xác định đồng thời chín chất tạo ngọt
bằng sắc ký lỏng hiệu năng cao sử dụng detector tán
xạ bay hơi
35
53 TCVN 11039-1:2015 Phụ gia thực phẩm.Phương pháp phân tích vi sinh
vật. Phần 1: Xác định tổng số vi sinh vật hiếu khí
bằng kỹ thuật đếm đĩa
12
54 TCVN 11039-2:2015 Phụ gia thực phẩm.Phương pháp phân tích vi sinh
vật. Phần 2: Xác định tổng số vi sinh vật hiếu khí
bằng kỹ thuật đếm đĩa xoắn
12
55 TCVN 11039-3:2015 Phụ gia thực phẩm.Phương pháp phân tích vi sinh
vật. Phần 3: Phát hiện và định lượng coliform và
E.coli bằng kỹ thuật đếm số có xác suất lớn nhất
(phương pháp chuẩn)
17
56 TCVN 11039-4:2015 Phụ gia thực phẩm.Phương pháp phân tích vi sinh
vật. Phần 4: Phát hiện và định lượng coliform và
E.coli bằng kỹ thuật đếm số có xác suất lớn nhất
(phương pháp thông dụng)
17
57 TCVN 11039-5:2015 Phụ gia thực phẩm.Phương pháp phân tích vi sinh
vật. Phần 5: Phát hiện salmonella
37
58 TCVN 11039-6:2015 Phụ gia thực phẩm.Phương pháp phân tích vi sinh
vật. Phần 6: Phát hiện và định lượng staphylococcus
aureus bằng kỹ thuật đếm khuẩn lạc
15
59 TCVN 11039-7:2015 Phụ gia thực phẩm.Phương pháp phân tích vi sinh
vật. Phần 7: Phát hiện và định lượng staphylococcus
aureus bằng kỹ thuật đếm có xác suất lớn nhất
(MPN)
15
60 TCVN 11039-8:2015 Phụ gia thực phẩm.Phương pháp phân tích vi sinh
vật. Phần 8: Định lượng nấm men và nấm mốc
11
7
61 TCVN 11168:2015 Phụ gia thực phẩm. Axit ascorbic 10
62 TCVN 11169:2015 Phụ gia thực phẩm. Aacorbyl palmitat 9
63 TCVN 11170:2015 Phụ gia thực phẩm. Ascorbyl stearat 9
64 TCVN 11171:2015 Phụ gia thực phẩm. Natri ascorbat 9
65 TCVN 11172:2015 Phụ gia thực phẩm. Canxi ascorbate 8
66 TCVN 11173:2015 Phụ gia thực phẩm. Butyl hydroxyanisol 11
67 TCVN 11174:2015 Phụ gia thực phẩm. Butyl hydroxytoluen 10
68 TCVN 11175:2015 Phụ gia thực phẩm. Lecithin 14
69 TCVN 11176:2015 Phụ gia thực phẩm. Kali metabisulfit 9
70 TCVN 11177:2015 Phụ gia thực phẩm. Kali sulfit 10
71 TCVN 11178:2015 Phụ gia thực phẩm. Natri hydro sulfit 9
72 TCVN 11179:2015 Phụ gia thực phẩm. Natri metabisulfit 9
73 TCVN 11180:2015 Phụ gia thực phẩm. Natri sulfit 9
74 TCVN 11181:2015 Phụ gia thực phẩm. Natri thiosulfat 9
75 TCVN 5778:2015 Phụ gia thực phẩm. Cacbon dioxit 14
VI SINH VẬT
Trở về đầu trang
76 TCVN 10784:2015 Vi sinh vật. Xác định khả năng sinh tổng hợp axit 3-
indol-acetic (IAA)
12
77 TCVN 10785:2015 Vi sinh vật. Xác định khả năng hòa tan kali 12
THỨC ĂN CHĂN NUÔI
Trở về đầu trang
78 TCVN 10808:2015 Thức ăn chăn nuôi. Xác định hàm lượng natri
lasalocid. Phương pháp sắc kí lỏng hiệu năng cao
12
79 TCVN 10809:2015 Thức ăn chăn nuôi. Xác định hàm lượng methyl
benzoquate. Phương pháp sắc kí lỏng hiệu năng cao
12
80 TCVN 10810:2015 Thức ăn chăn nuôi. Xác định hàm lượng diclazuril.
Phương pháp sắc kí lỏng hiệu năng cao
14
81 TCVN 10811:2015 Thức ăn chăn nuôi. Xác định hàm lượng olaquindox.
Phương pháp sắc kí lỏng hiệu năng cao
11
82 TCVN 10812:2015 Thức ăn chăn nuôi. Xác định hàm lượng amprolium.
Phương pháp sắc kí lỏng hiệu năng cao
12
THIẾT BỊ KHAI THÁC THỦY SẢN – HÀNG HẢI
Trở về đầu trang
8
83 TCVN 10596:2015 Thiết bị khai thác thủy sản. Vàng câu. Thông số kích
thước cơ bản
27
84 TCVN 10703:2015 Yêu cầu chất lượng dịch vụ vận hành đèn biển 19
85 TCVN 10704:2015 Yêu cầu chất lượng dịch vụ vận hành luồng hàng hải 28
86 TCVN 10933:2015 Thông tin duyên hải. Dịch vụ thông tin nhận dạng và
truy theo tầm xa tàu thuyền (LRIT)
11.
PHÂN BÓN
Trở về đầu trang
87 TCVN 10786:2015 Phân bón vi sinh vật. Xác định hoạt tính cố định nitơ
của azotobacter. Phương pháp định lượng khí etylen
12
MÁY LÂM NGHIỆP
Trở về đầu trang
88 TCVN 10871:2015 Máy lâm nghiệp - Bộ phận bảo vệ tay phía trước của
cưa xích cầm tay. Kích thước và khe hở
13
89 TCVN 10872:2015 Máy lâm nghiệp - Bộ phận bảo vệ tay của cưa xích
cầm tay. Độ bền cơ học
9
90 TCVN 10873:2015 Máy cưa xích cầm tay. Tính năng phanh hãm xích 8
91 TCVN 10874:2015 Máy lâm nghiệp.Cưa xích cầm tay. Đặc tính động cơ
và tiêu thụ nhiên liệu
9
92 TCVN 10875:2015 Máy lâm nghiệp.Cưa xích cầm tay. Khe hở và các
kích thước tối thiểu của tay cầm
10
93 TCVN 10876:2015 Máy lâm nghiệp.Cưa xích cầm tay. Xác định độ bền
của tay cầm
6
94 TCVN 10877:2015 Máy lâm nghiệp.Máy cắt bụi cây và máy cắt cỏ cầm
tay. Kích thước của tấm chắn bảo vệ bộ phận cắt
10
TIÊU CHUẨN NƯỚC NGOÀI
CÔNG NGHỆ THÔNG TIN
Trở về đầu trang
95 ISO/IEC 13249-3:2016
Replace: ISO/IEC
13249-3:2011
Information technology -- Database languages --
SQL multimedia and application packages -- Part 3:
Spatial
1328
96 ISO/IEC 15149-3:2016
Replace: ISO/IEC
15149:2011
Information technology -- Telecommunications and
information exchange between systems -- Magnetic
field area network (MFAN) -- Part 3: Relay Protocol
for Extended Range
11
97 ISO/IEC 15149-4:2016
Replace: ISO/IEC
15149:2011
Information technology -- Telecommunications and
information exchange between systems -- Magnetic
field area network (MFAN) -- Part 4: Security
Protocol for Authentication
11
9
98 ISO/IEC 17825:2016 Information technology -- Security techniques --
Testing methods for the mitigation of non-invasive
attack classes against cryptographic modules
46
99 ISO/IEC 19757-3:2016
Replace: ISO/IEC
19757-3:2006
Information technology -- Document Schema
Definition Languages (DSDL) -- Part 3: Rule-based
validation -- Schematron
36
100 ISO/IEC 29794-1:2016
Replace: ISO/IEC
29794-1:2009
Information technology -- Biometric sample quality -
- Part 1: Framework
19
101 ISO/IEC 30107-1:2016 Information technology -- Biometric presentation
attack detection -- Part 1: Framework
11
102 ISO/IEC 30130:2016 Software engineering -- Capabilities of software
testing tools
27
103 ISO/IEC TR 15440:2016
Replace: ISO/IEC TR
15440:2005
Information technology -- Future keyboards and
other input devices and entry methods
25
104 ISO/IEC/IEEE 8802-
1AX:2016
Information technology -- Telecommunications and
information exchange between systems -- Local and
metropolitan area networks -- Specific requirements -
- Part 1AX: Link aggregation
320
105 ISO/IEC/IEEE 8802-
1AX:2016
Information technology - Telecommunications and
information exchange between systems - Local and
metropolitan area networks - Specific requirements -
Part 1AX: Link aggregation
320
ĐIỆN – ĐIỆN TỬ- THIẾT BỊ
Trở về đầu trang
106 ISO 19027:2016 Design principles for communication support board
using pictorial symbols
27
107 ISO 17575-1:2016
Replace: ISO/TS 17575-
1:2010; ISO/TS 17575-
1:2010/Cor 1:2013
Electronic fee collection -- Application interface
definition for autonomous systems -- Part 1:
Charging
38
108 ISO 17575-2:2016
Replace: ISO/TS 17575-
2:2010
Electronic fee collection -- Application interface
definition for autonomous systems -- Part 2:
Communication and connection to the lower layers
28
109 ISO 17575-3:2016
Replace: ISO/TS 17575-
3:2011
Electronic fee collection -- Application interface
definition for autonomous systems -- Part 3: Context
data
118
110 ISO/IEC 25185-1:2016 Identification cards -- Integrated circuit card
authentication protocols -- Part 1: Protocol for
Lightweight Authentication of Identity
20
10
111 IEC 62911:2016 Audio, video and information technology equipment
- Routine electrical safety testing in production
20
112 IEC TR 61000-4-
37:2016
Electromagnetic compatibility (EMC) - Calibration
and verification protocol for harmonic emission
compliance test systems
59
113 IEC TR 62977-3-2:2016 Electronic display devices - Part 3-2: Evaluation of
optical characteristics - Mura
28
114 IEC 60384-14-1:2016
Replaces: IEC 60384-14-
1:2005
Fixed capacitors for use in electronic equipment -
Part 14-1: Blank detail specification - Fixed
capacitors for electromagnetic interference
suppression and connection to the supply mains -
Assessment level DZ
29
115 IEC 61377:2016
Replaces: IEC
61377:1996
Railway applications - Rolling stock - Combined test
method for traction systems
97
116 IEC 62047-1:2016
Replaces: IEC 62047-
1:2005
Semiconductor devices - Micro-electromechanical
devices - Part 1: Terms and definitions
66
117 IEC 62047-26:2016 Semiconductor devices - Micro-electromechanical
devices - Part 26: Description and measurement
methods for micro trench and needle structures
57
118 IEC 61788-4:2016
Replaces: IEC 61788-
4:2011
Superconductivity - Residual resistance ratio
measurement - Residual resistance ratio of Nb-Ti and
Nb3Sn composite superconductors
65
119 IEC 61189-3-719:2016 Test methods for electrical materials, printed boards
and other interconnection structures and assemblies -
Part 3-719: Test methods for interconnection
structures (printed boards) - Monitoring of single
plated-through hole (PTH) resistance change during
temperature cycling
22
120 IEC 61189-3-913:2016
Replaces: IEC PAS
61189-3-913:2011
Test methods for electrical materials, printed boards
and other interconnection structures and assemblies -
Part 3-913: Test method for thermal conductivity of
electronic circuit boards for high-brightness LEDs
57
121 BS EN 62321-7-1 Determination of certain substances in
electrotechnical products. Part 7-1: Determination of
the presence of hexavalent chromium (Cr(VI)) in
colorless and colored corrosion-protected coatings on
metals by the colorimetric method
24
122 PD IEC/TS 62257-
4:2015 Replace: DD
IEC/TS 62257-4:2005
Recommendations for renewable energy and hybrid
systems for rural electrification. System selection and
design
76
11
CÁP ĐIỆN
Trở về đầu trang
123 IEC 61196-11:2016 Coaxial communication cables - Part 11: Sectional
specification for semi-rigid cables with polyethylene
(PE) dielectric
13
124 IEC 61196-1-110:2016 Coaxial communication cables - Part 1-110:
Electrical test methods - Test for continuity
6
125 IEC TR 61282-14:2016 Fibre optic communication system design guides -
Part 14: Determination of the uncertainties of
attenuation measurements in fibre plants
39
126 IEC 61754-31:2016 Fibre optic interconnecting devices and passive
components - Fibre optic connector interfaces - Part
31: Type N-FO connector family
36
127 IEC TR 62627-08:2016 Fibre optic interconnecting devices and passive
components - Part 08: Study of optical power
blocking measurement methods for adaptors with an
optical power blocking shutter
24
128 IEC TR 62627-01:2016
Replaces: IEC TR
62627-01:2010
Fibre optic interconnecting devices and passive
components - Part 01: Fibre optic connector cleaning
methods
23
129 IEC 61753-381-6:2016 Fibre optic interconnecting devices and passive
components - Performance standard - Part 381-6:
Cyclic arrayed waveguide grating - Category O
(uncontrolled environment)
40
130 IEC 61753-381-2:2016 Fibre optic interconnecting devices and passive
components - Performance standard - Part 381-2:
Cyclic arrayed waveguide grating - Category C
(controlled environment)
38
131 IEC 61196-4-1:2016 Coaxial communication cables - Part 4-1: Blank
detail specification for radiating cables
8
132 IEC 61196-11-1:2016 Coaxial communication cables - Part 11-1: Blank
detail specification for semi-rigid cables with
polyethylene (PE) dielectric
9
133 PD IEC/TR 61282-
14:2016
Fibre optic communication system design guides.
Determination of the uncertainties of attenuation
measurements in fibre plants
44
GIAO THÔNG - VẬN TẢI
Trở về đầu trang
134 ISO 3691-2:2016 Industrial trucks -- Safety requirements and
verification -- Part 2: Self-propelled variable-reach
trucks
41
12
135 ISO 22915-1:2016
Replace: ISO 22915-
1:2008
Industrial trucks -- Verification of stability -- Part 1:
General
8
136 ISO 17438-1:2016 Intelligent transport systems -- Indoor navigation for
personal and vehicle ITS station -- Part 1: General
information and use case definition
20
137 ISO 23013:2016 Road vehicles -- Determination of resistance to
forced entry of security glass constructions used in
vehicle glazing -- Test of glazing systems
22
138 ISO/TS 19709-2:2016 Transport packaging -- Small load container systems
-- Part 2: Column Stackable System (CSS)
17
139 BS EN 13201-3:2015 Road lighting. Calculation of performance 68
MÁY BAY
Trở về đầu trang
140 ISO 9667:2016 Replace:
ISO 9667:1998
Aircraft ground support equipment -- Tow bars 5
141 ASTM F2972 - 15
Revises: ASTM F2972–
14ε1
Standard Specification for Light Sport Aircraft
Manufacturer’s Quality Assurance System
3
142 BS EN 3660-001:2016
Replace: BS EN 3660-
001:2006
Aerospace series - Cable outlet accessories for
circular and rectangular electrical and optical
connectors. Part 001: Technical specification
18
143 BS EN 3660-002:2016
Replace: BS EN 3660-
002:2006
Aerospace series. Cable outlet accessories for
circular and rectangular electrical and optical
connectors. Index of product standards
14
144 BS EN 3660-065:2016
Replace: BS EN 3660-
065:2009
Aerospace series. Cable outlet accessories for
circular and rectangular electrical and
opticalconnectors. Cable outlet, style K, 90°, for heat
shrinkable boot, shielded, sealed, self locking.
Productstandard
24
145 BS EN 4531-101:2016
Replace: BS EN 4531-
101:2012
Aerospace series - Connectors, optical, circular,
single and multipin, coupled by triple start threaded
ring - Flush contacts. Part 101: Optical contact for
EN 4641 multimode cable -55 °C to 125 °C - Product
standard
16
CƠ KHÍ - CHẾ TẠO
Trở về đầu trang
146 ISO 13373-2:2016
Replace: ISO 13373-
2:2005
Condition monitoring and diagnostics of machines --
Vibration condition monitoring -- Part 2: Processing,
analysis and presentation of vibration data
34
13
147 ISO 17464:2016 Pneumatic tubes for automotive vehicles -- Technical
requirements and test methods
7
148 ISO 8430-1:2016
Replace: ISO 8430-
1:1988
Resistance spot welding -- Electrode holders -- Part
1: Taper fixing 1:10
4
149 ISO 8430-2:2016
Replace: ISO 8430-
2:1988
Resistance spot welding -- Electrode holders -- Part
2: Morse taper fixing
4
150 ISO 8430-3:2016
Replace: ISO 8430-
3:1988; ISO 8430-
3:1988/Cor 1:1990
Resistance spot welding -- Electrode holders -- Part
3: Parallel shank fixing for end thrust
5
151 ISO 18278-2:2016
Replace: ISO 18278-
2:2004
Resistance welding -- Weldability -- Part 2:
Evaluation procedures for weldability in spot
welding
16
152 JIS B 1516:2015 Rolling bearings --- Marking 9
CẦN TRỤC
Trở về đầu trang
153 BS 7121-1:2016
Replace: BS 7121-
1:2006
Code of practice for safe use of cranes. General 104
LUYỆN KIM
Trở về đầu trang
154 JIS G 4305:2015/AMD 1 Cold- rolled stainless steel plate, sheet and strip
(Amendment 1)
4
155 ISO 15968:2016
Replace: ISO
15968:2000
Direct reduced iron -- Determination of apparent
density and water absorption of hot briquetted iron
(HBI)
7
156 JIS G 4304:2015/AMD 1 Hot-rolled stainles steel plate, sheet and strip
(Amendment 1)
4
157 JIS G 1258-1:2014 Iron and steel --- ICP atomic emission spectrometric
method --- Part 1 : Determination of vairious
elements --- DEcomposition with acids and fustion
with potassium disulfate
17
158 JIS G 1258-2:2014 Iron and steel --- ICP atomic emission spectrometric
method --- Part 2 : Determination of vairious
elements --- Decomposition with phosphoric and
sulfuric acids
19
159 JIS G 1258-2:2014 Iron and steel --- ICP atomic emission spectrometric
method --- Part 3 : Determination of vairious
17
14
elements --- Decomposition with acids and fusion
with sodium carbonate
160 ISO 7438:2016 Replace:
ISO 7438:2005
Metallic materials -- Bend test 8
161 JIS A 5314:2014 Mortar lining for ductile iron pipes 13
162 JIS G 3101:2015 Rolled steels for general structure 15
163 JIS G 3106:2015 Rolled steels for welded structure 24
164 JIS G 3447:2015 Stainless steel sanitary pipes 15
165 ASTM A276/A276M -
16 Revises: ASTM
A276/A276M–15
Standard Specification for Stainless Steel Bars and
Shapes
8
166 ASTM A479/A479M -
16 Revises: ASTM
A479/A479M–15
Standard Specification for Stainless Steel Bars and
Shapes for Use in Boilers and Other Pressure Vessels
8
167 ISO 17577:2016
Replace: ISO
17577:2006
Steel -- Ultrasonic testing of steel flat products of
thickness equal to or greater than 6 mm
13
168 JIS C 2558:2015 Thin magnetic steel strip for use at medium
frequencies
22
XÂY DỰNG - VẬT LIỆU XÂY DỰNG
Trở về đầu trang
169 ISO 19029:2016 Accessible design -- Auditory guiding signals in
public facilities
6
170 ISO 19863:2016 Buildings and civil engineering works -- Sealants --
Determination of tear resistance
6
171 ASTM D6757/D6757M
- 16 Revises: ASTM
D6757– 07 (Reapproved
2013)
Standard Specification for Underlayment Felt
Containing Inorganic Fibers Used in Steep-Slope
Roofing
2
172 ASTM F1141/F1141M -
15 Revises: ASTM
F1141–10
Standard Specification for Wall Coverings 3
173 ASTM D5970/D5970M
- 16 Revises: ASTM
D5970–09
Standard Test Method for Deterioration of
Geotextiles from Outdoor Exposure
3
174 ASTM E336 - 16
Revises: ASTM E336–
15
Standard Test Method for Measurement of Airborne
Sound Attenuation between Rooms in Buildings
15
175 ASTM F1515 - 15
Revises: ASTM F1515–
Standard Test Method for Measuring Light Stability
of Resilient Flooring by Color Change
4
15
03 (Reapproved 2008)
176 JIS A 6901:2014 Gypsum boards 39
177 BS EN 14227-15:2015 Hydraulically bound mixtures. Specifications.
Hydraulically stabilized soils
28
178 JIS A 5756:2013 Preformed gaskets used in buildings ---
Classification, specification and test methods
54
179 BS EN 13451-2:2015
Replace: BS EN 13451-
2:2001
Swimming pool equipment. Additional specific
safety requirements and test methods for ladders,
stepladders and handle bends
18
180 JIS A 1310:2015 Test method for fire propagation over building
facades
19
181 JIS A 9521:2014 Thermal insulation materials for buildings 48
SƠN VÀ VECNI
Trở về đầu trang
182 ISO 4628-1:2016
Replace: ISO 4628-
1:2003
Paints and varnishes -- Evaluation of degradation of
coatings -- Designation of quantity and size of
defects, and of intensity of uniform changes in
appearance -- Part 1: General introduction and
designation system
4
183 ISO 4628-10:2016
Replace: ISO 4628-
10:2003
Paints and varnishes -- Evaluation of degradation of
coatings -- Designation of quantity and size of
defects, and of intensity of uniform changes in
appearance -- Part 10: Assessment of degree of
filiform corrosion
8
184 ISO 4628-2:2016
Replace: ISO 4628-
2:2003
Paints and varnishes -- Evaluation of degradation of
coatings -- Designation of quantity and size of
defects, and of intensity of uniform changes in
appearance -- Part 2: Assessment of degree of
blistering
13
185 ISO 4628-3:2016
Replace: ISO 4628-
3:2003
Paints and varnishes -- Evaluation of degradation of
coatings -- Designation of quantity and size of
defects, and of intensity of uniform changes in
appearance -- Part 3: Assessment of degree of rusting
15
186 ISO 4628-4:2016
Replace: ISO 4628-
4:2003
Paints and varnishes -- Evaluation of degradation of
coatings -- Designation of quantity and size of
defects, and of intensity of uniform changes in
appearance -- Part 4: Assessment of degree of
cracking
15
187 ISO 4628-5:2016
Replace: ISO 4628-
5:2003
Paints and varnishes -- Evaluation of degradation of
coatings -- Designation of quantity and size of
defects, and of intensity of uniform changes in
6
16
appearance -- Part 5: Assessment of degree of flaking
188 ISO 4628-7:2016
Replace: ISO 4628-
7:2003
Paints and varnishes -- Evaluation of degradation of
coatings -- Designation of quantity and size of
defects, and of intensity of uniform changes in
appearance -- Part 7: Assessment of degree of
chalking by velvet method
5
PHÒNG THÍ NGHIỆM
Trở về đầu trang
189 ISO 4796-1:2016
Replace: ISO 4796-
1:2000
Laboratory glassware -- Bottles -- Part 1: Screw-neck
bottles
4
190 ISO 16496:2016 Laboratory glassware -- Vacuum-jacketed vessels for
heat insulation
14
CHẤT DẺO
Trở về đầu trang
191 ISO 5774:2016 Replace:
ISO 5774:2006
Plastics hoses -- Textile-reinforced types for
compressed-air applications -- Specification
13
192 ISO 11999-9:2016 PPE for firefighters -- Test methods and requirements
for PPE used by firefighters who are at risk of
exposure to high levels of heat and/or flame while
fighting fires occurring in structures -- Part 9: Fire
hoods
8
193 ISO 9967:2016 Replace:
ISO 9967:2007
Thermoplastics pipes -- Determination of creep ratio 12
194 ISO 9969:2016 Replace:
ISO 9969:2007
Thermoplastics pipes -- Determination of ring
stiffness
8
195 ASTM D2855 - 15
Revises: ASTM D2855–
96 (Reapproved 2010)
Standard Practice for the Two-Step (Primer and
Solvent Cement) Method of Joining Poly (Vinyl
Chloride) (PVC) or Chlorinated Poly (Vinyl
Chloride) (CPVC) Pipe and Piping Components with
Tapered Sockets
10
196 ASTM D4802 - 15
Revises: ASTM D4802–
10
Standard Specification for Poly(Methyl
Methacrylate) Acrylic Plastic Sheet
6
CAO SU
Trở về đầu trang
197 ISO 6502:2016 Replace:
ISO 6502:1999
Rubber -- Guide to the use of curemeters 21
198 ISO 13363:2016
Replace: ISO
13363:2004
Rubber and plastics hoses for marine-engine wet-
exhaust systems -- Specification
9
17
199 ISO 11235:2016
Replace: ISO
11235:1999
Rubber compounding ingredients -- Sulfenamide
accelerators -- Test methods
25
200 ISO 19013-2:2016
Replace: ISO 19013-
2:2005
Rubber hoses and tubing for fuel circuits for internal
combustion engines -- Specification -- Part 2:
Gasoline fuels
22
201 ISO 4665:2016 Replace:
ISO 4665:2006
Rubber, vulcanized or thermoplastic -- Resistance to
weathering
11
DẦU MỎ
Trở về đầu trang
202 ISO 19905-1:2016
Replace: ISO 19905-
1:2012
Petroleum and natural gas industries -- Site-specific
assessment of mobile offshore units -- Part 1: Jack-
ups
320
203 ISO/TS 17306:2016 Petroleum products -- Biodiesel -- Determination of
free and total glycerin and mono-, di- and
tracylglycerols by gas chromatography
21
204 ISO/TS 17307:2016 Petroleum products -- Biodiesel -- Determination of
total esters content by gas chromatography
11
NHIÊN LIỆU SINH HỌC RẮN
Trở về đầu trang
205 BS EN ISO 17831-
2:2015 Replace: BS EN
15210-2:2010
Solid biofuels. Determination of mechanical
durability of pellets and briquettes. Briquettes
18
GỖ - SẢN PHẨM GỖ
Trở về đầu trang
206 ISO 12460-4:2016
Replace: ISO 12460-
4:2008
Wood-based panels -- Determination of
formaldehyde release -- Part 4: Desiccator method
9
207 ISO 16893:2016
Replace: ISO 16893-
1:2008; ISO 16893-
2:2010
Wood-based panels -- Particleboard 17
GỐM SỨ - THỦY TINH
Trở về đầu trang
208 ISO 28706-4:2016
Replace: ISO 28706-
4:2008
Vitreous and porcelain enamels -- Determination of
resistance to chemical corrosion -- Part 4:
Determination of resistance to chemical corrosion by
alkaline liquids using a cylindrical vessel
12
209 ISO 28765:2016
Replace: ISO
Vitreous and porcelain enamels -- Design of bolted
steel tanks for the storage or treatment of water or
24
18
28765:2008 municipal or industrial effluents and sludges
GIẤY
Trở về đầu trang
210 ISO 11093-5:2016
Replace: ISO 11093-
5:2009; ISO 11093-
5:2009/Cor 1:2010
Paper and board -- Testing of cores -- Part 5:
Determination of characteristics of concentric
rotation
4
GỖ
Trở về đầu trang
211 BS EN 12521:2015
Replace: BS EN
12521:2009
Furniture. Strength, durability and safety.
Requirements for domestic tables
14
Y TẾ - THIẾT BỊ Y TẾ
Trở về đầu trang
212 ISO 22674:2016
Replace: ISO
22674:2006
Dentistry -- Metallic materials for fixed and
removable restorations and appliances
36
213 ISO 18397:2016
Replace: ISO
15606:1999; ISO
22374:2005
Dentistry -- Powered scaler 17
214 ISO 15912:2016
Replace: ISO
15912:2006; ISO
15912:2006/Amd 1:2011
Dentistry -- Refractory investment and die material 25
215 ISO 18362:2016 Manufacture of cell-based health care products --
Control of microbial risks during processing
32
216 IEC 60118-13:2016
Replaces: IEC 60118-
13:2011
Electroacoustics - Hearing aids - Part 13:
Electromagnetic compatibility (EMC)
56
217 IEC PAS 63023:2016 Medical electrical system - Input interface for
haemodialysis equipment for use of external
alarming device
12
MÁY LỌC NƯỚC
Trở về đầu trang
218 JIS S 3241:2015 Household water purifier 19
CHẤT LƯỢNG ĐẤT
Trở về đầu trang
219 ISO 17601:2016 Soil quality -- Estimation of abundance of selected
microbial gene sequences by quantitative PCR from
31
19
DNA directly extracted from soil
220 ISO 18311:2016 Soil quality -- Method for testing effects of soil
contaminants on the feeding activity of soil dwelling
organisms -- Bait-lamina test
16
MÔI TRƯỜNG – AN TOÀN
Trở về đầu trang
221 ASTM D7002 - 16
Revises: ASTM D7002–
15
Standard Practice for Electrical Leak Location on
Exposed Geomembranes Using the Water Puddle
Method
4
222 ASTM D7703 - 16
Revises: ASTM D7703–
15
Standard Practice for Electrical Leak Location on
Exposed Geomembranes Using the Water Lance
Method
5
PHÓNG XẠ
Trở về đầu trang
223 ISO 7503-1:2016
Replace: ISO 7503-
1:1988
Measurement of radioactivity -- Measurement and
evaluation of surface contamination -- Part 1:
General principles
26
224 ISO 7503-2:2016
Replace: ISO 7503-
2:1988
Measurement of radioactivity - Measurement and
evaluation of surface contamination -- Part 2: Test
method using wipe-test samples
26
225 ISO 7503-3:2016
Replace: ISO 7503-
3:1996
Measurement of radioactivity -- Measurement and
evaluation of surface contamination -- Part 3:
Apparatus calibration
63
226 ISO 8769:2016 Replace:
ISO 8769:2010
Reference sources -- Calibration of surface
contamination monitors -- Alpha-, beta- and photon
emitters
14
227 BS ISO 8769:2016
Replace: BS ISO
8769:2010
Reference sources. Calibration of surface
contamination monitors. Alpha-, beta- and photon
emitters
26
ÂM HỌC
Trở về đầu trang
228 ISO 389-3:2016 -
Replace: ISO 389-
3:1994; ISO 389-
3:1994/Cor 1:1995
Acoustics -- Reference zero for the calibration of
audiometric equipment -- Part 3: Reference
equivalent threshold vibratory force levels for pure
tones and bone vibrators
13
229 ISO 6926:2016 Replace:
ISO 6926:1999
Acoustics -- Requirements for the performance and
calibration of reference sound sources used for the
determination of sound power levels
20
DỤNG CỤ ĐO
Trở về đầu trang
20
230 JIS C 1602:2015 Thermocouples 73
TIÊU CHUẨN ASTM HỦY KHÔNG CÓ THAY THẾ
Trở về đầu trang
231 ASTM D4723-07e2 Standard Classification Index of and Descriptions of
Textile Flammability Test Methods
5
232 ASTM E2290-07a Standard Guide for Examination of Handwritten
Items
4
233 ASTM F2442-07 Standard Guide for Layout of Ice Arena 5
234 ASTM E2162-07 Standard Guide for Minimum Continuing Education
of Individuals Involved in Psychophysiological
Detection of Deception (PDD) Testing of Sex
Offenders
2
235 ASTM D5410-93(2007) Standard Guide for Set of Data Elements to Describe
a Groundwater Site; Part Three - Usage Descriptors
13
236 ASTM E2493-07 Standard Guide for the Collection of Non-Volatile
Memory Data in Evidentiary Vehicle Electronic
Control Units
2
237 ASTM F2594-07 Standard Guide for Unmanned Undersea Vehicle
(UUV) Communications
26
238 ASTM F2545-07 Standard Guide for Unmanned Undersea Vehicle
(UUV) Physical Payload Interface
7
239 ASTM F2595-07 Standard Guide for Unmanned Undersea Vehicle
(UUV) Sensor Data Formats
12
240 ASTM F1543-96(2007) Standard Specification for Shock Attenuation
Properties of Fencing Surfaces
3
241 ASTM C274-07 Standard Terminology of Structural Sandwich
Constructions
1
242 ASTM E1863-07 Standard Test Method for Analysis of Acrylonitrile
by Gas Chromatography
4
243 ASTM E1771-07 Standard Test Method for Determination of Copper
in Anode and Blister Copper
3
244 ASTM D113-07 Standard Test Method for Ductility of Bituminous
Materials
4
245 ASTM D6611-00(2007) Standard Test Method for Wet and Dry Yarn-on-
Yarn Abrasion Resistance
8
246 ASTM F1404-92(2007) Test Method for Crystallographic Perfection of
Gallium Arsenide by Molten Potassium Hydroxide
(KOH) Etch Technique
6
21
Thư viện Trường Đại học Công Nghiệp TP.HCM phối hợp với Trung tâm thông tin khoa
học và công nghệ TP.HCM cung cấp thông tin toàn văn dành cho người sử dụng thư viện trong
trường (SV, GV, HVCH, CBVC...) có nhu cầu học tập, nghiên cứu, tham khảo. Để gửi và nhận thông
tin, xin vui lòng liên hệ:
1. Thư viện Đại học Công Nghiệp TP.HCM: Gửi thông tin yêu cầu bằng 1 trong các phương tiện
sau:
+ Cổng thông tin Thư viện: http://lib.iuh.edu.vn tại mục "Yêu cầu tin";
+ Facebook: http://facebook.com/libiuh - Gửi qua "Tin nhắn" trên Page;
+ Liên hệ Phòng Nghiệp vụ: Phan Minh Trí – 0919.8989.33 - ĐT: (08) 38940390 (130) - Email:
2. Phòng đảm bảo thông tin của trung tâm thông tin khoa học và công nghệ TP.HCM
Địa chỉ: 79 Trương Định - Q1 - TP.HCM
ĐT: (08)38243826: (08)38297040 Ext: 202-203-216) Fax: 38291957
Website: www.cesti.gov.vn Email: [email protected]
Lưu ý
1/ Khi đến gửi yêu cầu thông tin, bạn nhớ mang theo thẻ sinh viên, thẻ giảng viên của trường.
2/ Thông tin được cung cấp miễn phi, ngoại trừ chi phí: in ấn tài liệu, mua tài liệu (nếu có)
Thư viện Trường Đại học Công nghiệp Thành phố H Chí Minh.