The new TRILUX products for 2010 have arrived

IndoorNew Products 2010

It‘s time for New Light – The new TRILUX products for 2010 have arrived

In the pages of this supplementary catalogue we present you with the latest TRILUX solutions. After all, New Light would not be New Light if it were not in a state of constant change, and we’ve been working for nearly 100 years to continuously improve it. Since the publication of the last indoor catalogue, we have again brought lighting a major step forward: our light has become significantly more efficient, attractive and diverse.

More efficient – because we have been able to improve further upon luminaire technol-ogy for LEDs, for example with optimised thermal management, newly developed, highly efficient LED optics and the use of the latest-generation, high-luminous flux LED. And more efficiency with the further devel-opment of light management systems, mak-ing possible incomparably efficient, highly natural and individual lighting.

More attractive – because we’ve been successful in devel-oping a new form of inspiring luminaire design, as regularly confirmed by national and international panels of experts.

More diverse – because a completely new section has been added: light for designing. We cannot do without good general lighting, but it’s not everything. When it’s a matter of high-lighting particular details, creating emotions and establishing a unique atmosphere, accent lighting for design purposes comes into its own.

We wish you inspiring reading with the highly efficient, attractive and diverse advantages of New Light.

�054SncFlair 500 LED

�054SncFlair 400 LED

�038SncPoint 300 LED

�044SncPoint 700 LED

�022Onperla LED

�012Inperla LED

�010Athenik LED

074SolvanB

070Enspiro LED

066Neximo LED

LED

Downlights

Designing light

Surface-mounted, suspended and free-standing luminaires

Recessed luminaires

Light channel

Luminaires for special areas of application

Light management

Technical notes

036ScenaticPoint

048ScenaticFlex

052ScenaticFlair

056ScenaticWall

058Circuit tracks

010Athenik LED

012Inperla

022Onperla

�066Neximo LED

080Valuco S

�070Enspiro LED

�0987402N LED

�102Solvan LED

�120Mirona LED

�160Aragon LED

080Valuco Active

080Valuco D

080Valuco H

090504···/505···

0987402N LED

102Solvan LED

108Liventy

114Alinio

120Mirona LED

124Durata

128E-Line T5N

160Aragon LED

162Actison

172

192

Inperla LED � 12 Mirona LED � 120

Onperla LED � 22Athenik LED � 10

Enspiro LED � 70Enspiro LED � 70

One technology, an infinite array of possibilities: LED

Aragon LED � 160

Neximo LED � 66

Solvan LED � 102

LED means the future. And at TRILUX it is already the present.Up until now LED technology has been used predominantly for decorative highlighting and accent lighting, but with TRILUX it’s a permanent component of general lighting; and without losing any of its fascination. In fact just the opposite. The latest-generation LEDs open up completely new possibilities. Their compact dimensions give our designers unheard of possibilities for slender luminaire designs not experienced until now. Their extremely long service life means almost complete freedom from maintenance, and thus enormous cost savings as well. Thanks to TRILUX thermal management we have been able to extend the already extremely long service life even further. And yet we still work daily towards making LEDs even more efficient.

Downlights

10

Athenik LED

The pleasant companion.A lucid, reduced design combined with gentle light. Athenik facilitates office work with its pleasant light effect, combined with effective glare elimination for computer screen workstations. Harmonious: the clear, square frame with semi-specular light emission structure reflects clear spatial architecture.Pleasant: soft light with maximum efficiency via precision lenses.Glare-free: standardised glare elimination for computer screen work-stations.Unique: the frosted, luminous surface between the lenses creates soft transitions and a pleasant perception of light.Simple: timesaving, tool-free installation thanks to the tried-and-proven mounting system.

LCL-Technology (Low Contrast Light technology)A pleasant perception of light with TRILUX Low Contrast Light technology: illumination of the transitions reduces the sharp borders between bright LED light sources and dark surfaces.

11

C0- C180

C0- C180

Athenik C1 MR LED···

Athenik C1 LS LED···

Athenik C1 MR LED···01Athenik C1 LS LED···03 Athenik C1 MR LED···03

234

65

11

234

65

Designation TOC Electrical version Lamps/ Power Recess Bezel ring ≈kgLuminous flux/ consumption opening Colour

···ET ···ETDD Light colour mmAthenik C1 LS LED 1900 nw···01 59 004··· ···40 ···51 LED/1900/nw 42 W 231 x 231 White 3.2Athenik C1 LS LED 1900 nw···03 59 005··· ···40 ···51 LED/1900/nw 42 W 231 x 231 Silver-grey 3.2

Athenik C1 MR LED 2000 nw···01 59 002··· ···40 ···51 LED/2000/nw 42 W 231 x 231 White 2.2Athenik C1 MR LED 2000 nw···03 59 003··· ···40 ···51 LED/2000/nw 42 W 231 x 231 Silver-grey 2.2

Mounting accessories TOC DescriptionDesignationAthenik C1 MP 300 44 795 00 Mounting case for metal plank ceilings, module 100Athenik C1 MP 600 44 796 00 Mounting plate, for reinforcement of ceiling plates, module 600Athenik C1 MP 625 44 797 00 Mounting plate, for reinforcement of ceiling plates, module 625Athenik C1 BE 44 788 00 Concrete sealed housing

d a IP20 0.35 joules 850 °C

AthenikRecessed LED downlights with compact C1 construction

Athenik C1 MR LED nwUTE: 1.00 C + 0.00 TDIN 5040: A50 CIBSE: BZ 1 NBN L 14-002: BZ 2

Athenik C1 LS LED nwUTE: 1.00 A + 0.00 TDIN 5040: A80 CIBSE: BZ 1 NBN L 14-002: BZ 1

ApplicationFor innovative, prestigious lighting or auxiliary lighting in sales areas, foyers, corridors, office areas, conference rooms, hotels, restaurants and residential areas.

Optical systems···LS LED··· Consisting of 16 high power LEDs with precision lenses for each LED and partly frosted cover. LCL-Technology.···MR LED··· Consisting of 16 high power LEDs with aluminium louvre elements for each LED. Louvre elements semi-specular with reflec-tion-intensifying surface.

Suitable for VDU workstations according to EN 12464-1 via limited luminance L ≤ 1000 cd/m² for distribution characteristics above 65° all-round. LED with constant colour stability and colour rendering index of Ra > 80, over complete service life. ···nw··· Neutral white light colour, colour temperature 4000 K.···1900··· Luminaire luminous flux 1900 lm.···2000··· Luminaire luminous flux 2000 lm.

Luminaire bodyGalvanised sheet steel, with square, die-cast bezel ring with precise rectangular section. Tool-free recess-mounting via rapid-mounting springs.

Bezel ring···01 White.···03 Silver-grey, similar to RAL 9006.

Electrical connectionElectrical equipment for LED mains power in separate housing, with connector terminal for 2.5 mm² cables and strain relief system. Housing and adapter for LED supports made of heat-resistant plastic, interconnected via 500 mm long sheathed cable. LED support, made of aluminium, simultaneously serves as heat sink.

Electrical versionWith electronic mains power, integrated in electrical equipment compartment.···ET With electronic transformer.···ETDD With digitally dimmable electronic transformer (DALI).

12

An investment in a care-free future.Thanks to a wide range of attachments, Inperla LED optically blends with nearly all types of architecture. Because harmoniously distributed light makes sense in any room, and especially when it contributes to saving energy.

Variable: can be used during the building construction phase thanks to the removable reflector; magnetic fixing allows simple cleaning of the reflector.Future-fit: increasing efficiency with future generations, with constant luminous flux and uniform light quality.Carefree: completely tool-free installation.

Inperla

13

AdaptableCan be integrated into almost all interiors thanks to various attachments.

SafeCover for IP54 protection from below.

EfficientToday, the Inperla LED is already more efficient than a downlight with 2 x 26 W TCT lamps.

14

Inperla C2 HR LED···

295

145

35

210225

max. 580

10–2

5

157

Inperla C2 HR LED···

C0- C180ApplicationFor innovative and prestigious lighting of sales areas, foyers, corridors, office areas, conference rooms, hotels, restaurants and residential areas.

Optical systems···HR LED··· LED module with high quality diffuser optics, combined with a reflector of ultra-pure aluminium, highly-specular, individually anodised. LED with constant colour stability and colour rendering index of Ra > 80, guaranteed over complete service life.···nw··· Neutral white light colour, colour temperature 4000 K.···ww··· Warm white light colour, colour temperature 3000 K.···1100··· Total luminous flux 1100 lm.···2000··· Total luminous flux 2000 lm.

Luminaire bodySheet steel, galvanised, with circular die-cast bezel ring. Shadow gap between bezel ring and reflector edge for accommodation of attachments. Tool-free recess-mounting via rapid-mounting springs.


Electrical connectionSeparate electrical equipment with integral strain relief system and LED module connected via sheathed cable.

Electrical version···ET With electronic transformer.···ETDD With digitally dimmable electronic transformer (DALI).

Inperla LEDRecessed LED downlights with compact C2 construction

6 5 4 d a IP20 0.2 joules 850 °C with closed cover IP54 from below

Inperla C2 HR LED 2000 wwUTE: 0.95 D + 0.00 T DIN 5040: A50 CIBSE: BZ 1 NBN L 14-002: BZ 3/3/BZ 2

Designation TOC Electrical Lamps/ Power Recess opening/ ≈kgversion Luminous flux/ consumption Recess depth ···ET ···ETDD Light colour mm

White Inperla C2 HR LED 1100 nw···01 58 906··· ···40 ···51 LED/1100 lm/nw 18 W ¶ 210 x 145 2.5Inperla C2 HR LED 1100 ww···01 58 638··· ···40 ···51 LED/1100 lm/ww 19 W ¶ 210 x 145 2.5Inperla C2 HR LED 2000 nw···01 58 912··· ···40 ···51 LED/2000 lm/nw 32 W ¶ 210 x 145 2.5Inperla C2 HR LED 2000 ww···01 58 910··· ···40 ···51 LED/2000 lm/ww 36 W ¶ 210 x 145 2.5Silver-grey Inperla C2 HR LED 1100 nw···03 58 907··· ···40 ···51 LED/1100 lm/nw 18 W ¶ 210 x 145 2.5Inperla C2 HR LED 1100 ww···03 58 639··· ···40 ···51 LED/1100 lm/ww 19 W ¶ 210 x 145 2.5Inperla C2 HR LED 2000 nw···03 58 911··· ···40 ···51 LED/2000 lm/nw 32 W ¶ 210 x 145 2.5Inperla C2 HR LED 2000 ww···03 58 909··· ···40 ···51 LED/2000 lm/ww 36 W ¶ 210 x 145 2.5

15

Inperla C2 HR-Ag···03

C0- C180

276 234370

100

10-2

5

65

3210

226

Inperla C2···

Lamp data ································193

ApplicationFor prestigious lighting of sales areas, foyers, corridors, office areas, conference rooms, hotels, restaurants and residential areas.

Optical system···HR-Ag··· Energy-efficient, folded aluminium reflector, highly-specular, with reflection- intensifying silver surface, reflectance value > 98 %, can be attached without tools.

Luminaire bodySheet steel, galvanised, with circular die-cast bezel ring. Shadow gap between bezel ring and reflector edge for accommodation of attachments. Tool-free recess-mounting via rapid-mounting springs.


Electrical connectionElectrical equipment in separate housing, with connector terminal for 2.5 mm² cables and strain relief system. Housing and lamp holder of heat-resistant plastic, inter-connected via 370 mm long connection cable.

Electrical version···E With electronic multi-lamp control gear.···EDD With digitally dimmable electronic multi-lamp control gear (DALI).

Designation TOC Electrical Lamps Recess opening/ ≈kgversion Recess depth ···E ···EDD W mm

White Inperla C2 HR-Ag 1TCT26/32···01 58 640··· ···04 ···07 1 x TC-TEL 26/32 ¶ 210 x 100 1.8Silver-grey Inperla C2 HR-Ag 1TCT26/32···03 58 641··· ···04 ···07 1 x TC-TEL 26/32 ¶ 210 x 100 1.8

Inperla SilverRecessed downlights with small C2 construction, with highly-specular reflector of folded silver-coated aluminium (HR-Ag)

6 5 4 d a IP20 0.2 joules 850 °C with closed cover IP54 from below

Inperla C2 HR-Ag 1TCT26···UTE: 0.92 D + 0.00 TDIN 5040: A50CIBSE: BZ 3/1.25/BZ 2NBN L 14-002:BZ 4/.8/BZ 3

16

Decorative cone ringMade of polycarbonate. For Inperla C2··· downlights.

Decorative cylinder, longMade of polycarbonate. For Inperla C2··· downlights.

Decorative cylinder, shortMade of polycarbonate. For Inperla C2··· downlights.

Designation TOC ≈kgInperla C2 ZN-PC 51 624 00 0.3

Designation TOC ≈kgInperla C2 ZH-PC 51 625 00 0.3

Designation TOC ≈kgInperla C2 RK-PC 52 018 00 0.3

Decorative ring, domedMade of polycarbonate. For Inperla C2··· downlights.

InperlaDecorative elements

Designation TOC ≈kgInperla C2 RG-PC 51 626 00 0.1

17

Decorative ring, domed, blueMade of polycarbonate. For Inperla C2··· downlights.

Decorative ring, domed, greenMade of polycarbonate. For Inperla C2··· downlights.

Decorative ring, domed, yellowMade of polycarbonate. For Inperla C2··· downlights.

Designation TOC ≈kgInperla C2 RI-PC 01 51 996 00 0.6Inperla C2 RI-PC 03 52 016 00 0.6

Designation TOC ≈kgInperla C2 RI-PC blue 01 52 029 00 0.6Inperla C2 RI-PC blue 03 52 017 00 0.6

Decorative ring, domed, redMade of polycarbonate. For Inperla C2··· downlights.

Decorative ring, opalMade of polycarbonate. Integrated in decora-tive die-cast ring, white (···01) or silver-grey (···03). For Inperla C2··· downlights.

Decorative ring, blueMade of polycarbonate. Integrated in decora-tive die-cast ring, white (···01) or silver-grey (···03). For Inperla C2··· downlights.

Designation TOC ≈kgInperla C2 RG-PC blue 52 036 00 0.1

Designation TOC ≈kgInperla C2 RG-PC yellow 52 037 00 0.1

Designation TOC ≈kgInperla C2 RG-PC green 52 038 00 0.1

Designation TOC ≈kgInperla C2 RG-PC red 52 039 00 0.1

18

Decorative ring, yellowMade of polycarbonate. Integrated in decora-tive die-cast ring, white (···01) or silver-grey (···03). For Inperla C2··· downlights.

Decorative cover, cylindricalFor IP54 protection rating from below. Made of polycarbonate. Integrated in decorative die-cast ring, silver-grey. For Inperla C2··· downlights.

Decorative cover, cylindricalFor IP54 protection rating from below. Made of polycarbonate. Integrated in decorative die-cast ring, white.For Inperla C2··· downlights.

Decorative cover, archedFor IP54 protection rating from below. Made of polycarbonate. Integrated in decorative die-cast ring, silver-grey. For Inperla C2··· downlights.

Decorative ring, greenMade of polycarbonate. Integrated in decora-tive die-cast ring, white (···01) or silver-grey (···03). For Inperla C2··· downlights.

Decorative ring, redMade of polycarbonate. Integrated in decora-tive die-cast ring, white (···01) or silver-grey (···03). For Inperla C2··· downlights.

Designation TOC ≈kgInperla C2 RI-PC yellow 01 52 030 00 0.6Inperla C2 RI-PC yellow 03 52 033 00 0.6

Designation TOC ≈kgInperla C2 AZ-PC 03 51 987 00 0.7

Designation TOC ≈kgInperla C2 AZ-PC 01 52 006 00 0.7

Designation TOC ≈kgInperla C2 AG-PC 03 52 005 00 0.7

Designation TOC ≈kgInperla C2 RI-PC green 01 52 031 00 0.6Inperla C2 RI-PC green 03 52 034 00 0.6

Designation TOC ≈kgInperla C2 RI-PC red 01 52 032 00 0.6Inperla C2 RI-PC red 03 52 035 00 0.6

InperlaDecorative elementsDecorative covers (IP54)

19

Decorative cover, domedFor IP54 protection rating from below. Made of polycarbonate. Integrated in decorative die-cast ring, white.For Inperla C2··· downlights.

Decorative cover, partly frostedFor IP54 protection rating from below. Of float glass, integrated in decorative die-cast ring, white (···01) or silver-grey (···03). In construction size ···C2···. For Inperla C2··· downlights. Not suitable for Inperla ···2TCT42.

Decorative ringOf die-cast material, white (···01) or silver-grey (···03). In construction size ···C2···.For Inperla C2··· downlights.

Decorative cover, clearFor IP54 protection rating from below. Of float glass, integrated in decorative die-cast ring, white (···01) or silver-grey (···03). In construction size ···C2···. For Inperla C2··· downlights.Not suitable for Inperla ···2TCT42.

Decorative cover, frostedFor IP54 protection rating from below. Of float glass, integrated in decorative die-cast ring, white (···01) or silver-grey (···03). In construction size ···C2···.For Inperla C2··· downlights.Not suitable for Inperla ···2TCT42.

Decorative disk, frostedFloat glass. In construction size ···C2···.For Inperla C2··· downlights.

Designation TOC ≈kgInperla C2 AG-PC 01 51 986 00 0.7

Designation TOC ≈kgInperla C2 DA-TM 01 51 992 00 0.7Inperla C2 DA-TM 03 51 993 00 0.7

Designation TOC ≈kgInperla C2 DA-M 01 51 990 00 0.7Inperla C2 DA-M 03 51 991 00 0.7

Designation TOC ≈kgInperla C2 DD 01 51 994 00 0.6Inperla C2 DD 03 51 995 00 0.6

Designation TOC ≈kgInperla C2 DA 01 51 988 00 0.7Inperla C2 DA 03 51 989 00 0.7

Designation TOC ≈kgInperla C2 DS-M 51 980 00 1.1

20

InperlaDecorative elements

Decorative disk, partly-frostedFloat glass. In construction size ···C2···. For Inperla C2··· downlights.

Decorative rings, frostedFloat glass. In construction size ···C2···. For Inperla C2··· downlights.

Decorative rings, partly frostedFloat glass. In construction size ···C2···. For Inperla C2··· downlights.

Designation TOC ≈kgInperla C2 DS-TM 51 981 00 1.1

Designation TOC ≈kgInperla C2 DR-M 51 978 00 0.9

Designation TOC ≈kgInperla C2 DR-TM 51 979 00 0.9

21

181/186

557/572

8511

2 (C

AT2/

LED)

133

362/

372

404/

414

210/ 260

130

157

(CAT

2/LE

D)18

5

Inperla C2 BE···

InperlaMounting accessories

Mounting cases for metal plank ceilingsSheet steel, white. In construction size···C2···. For recess-mounting of Inperla C2··· downlights in metal plank ceilings.

Mounting platesFor reinforcement of ceiling plates (module 600 and 625) and for downlight recess- mounting in closed ceilings with low load bearing capacity. Sheet steel, fully galvanised. For recess-mounting of Inperla C2··· down-lights.

Concrete sealed housingSheet steel. In 2 construction sizes ···C2···, ···C2··· CAT2. For recess-mounting of Inperla C2··· downlights including control gear box.

Designation TOCInperla C2 MP 300 52 011 00

Designation TOCInperla C2 MP 625 52 013 00Inperla C2 MP 600 52 012 00

Designation TOCInperla C2 BE 52 007 00Inperla C2 BE CAT2* 52 008 00*For Inperla C2···LED···

22

Onperla

Accentuating, and noticeably different.The Onperla surface-mounted downlight takes its place on stage without edges and corners. The appearance of the high quality, fine structured surface is not disrupted by joins or gaps, giving a sense of calmness that pleasantly contributes to the room impression. Onperla LED gets double the amount of attention: as a component of general lighting and also as an accent light source.

Simple: rapid fixing to the ceiling and direct electrical connection from luminaire to luminaire.Elegant: luminaire body appears join-free with finely structured surface.Safe: sealed decorative attachments allow for use in harsh environments – IP54 protection.

23

Versatile: Modular, design variations, technical and decorative accessories.

Safe: In combination with an IP housing, the all around protection type IP54 is achieved through a sealed cover.

Accentuating: Lateral, surrounding coloured light emission and colourful emphasis of the environment.

24

Onperla D2 HR···I2 + Inperla C2 DD 03Onperla D2 HR···01 +

Inperla C2 RI-PC 01 + Onperla ZS···Onperla D2···LED-RGB I2 +

Inperla C2 DA-M 03

C0- C180

C0- C180

C0- C180

OnperlaSurface-mounted downlights

IP20 0.2 joules 850 °C IP version includes sealed IP54 cover

ApplicationFor prestigious lighting of sales areas, foyers, corridors, office areas, conference rooms, hotels, restaurants and residential areas.

Optical systemsReflector made of ultra-pure aluminium, individually anodised, can be attached without tools.···BR··· Facetted.···HR··· Highly-specular.···MR··· Semi-specular.···LED-RGB··· With lateral, surrounding LED strip for coloured light design and discreet ceiling illumination.

Luminaire bodyAluminium, cylindrical, fine structure-coated. Integral cover ring made of die-cast zinc, powder-coated. Functional groove in cover ring for tool-free attachment of covers.···01··· White.···I2··· Housing black, cover ring silver-grey.···LED-RGB··· With integral ceiling-ring made of polycarbonate for discreet ceiling illumi-nation.···IP··· Ceiling connection made of die-cast aluminium with integral channels for lateral cable entry.

Electrical connection2 cable entries, with 5-pole connector terminal for 2.5 mm² cables.

Electrical version···E With electronic multi-lamp control gear.···EDD With digitally dimmable electronic multi-lamp control gear (DALI).···LED-RGB Additionally with electronic transformer with DALI interface for LED RGB.

6 5 4 d a

Onperla D2 MR 1TCT26···UTE: 0.81 DDIN 5040: A50CIBSE: BZ 3/2/BZ 2/2.5/BZ 3NBN L 14-002: BZ 4/1/BZ 3

Onperla D2 BR 1TCT26···UTE: 0.83 DDIN 5040: A50CIBSE: BZ 3/2/BZ 2/2.5/BZ 3/4/BZ 2NBN L 14-002: BZ 4/1/BZ 3

Onperla D2 HR 1TCT26···UTE: 0.83 DDIN 5040: A50CIBSE: BZ 3/2/BZ 2/2.5/BZ 3/4/BZ 2NBN L 14-002: BZ 4/1/BZ 3

25

Onperla D2··· +LED-RGB···

238

180

48 E116

116

47

20

Onperla D2···IP···Onperla D2···

239

179

48 E116

116

47

20

201

238

162

30

E116

116

35

Accessories · ····························· 26Lamp data ································193

Designation TOC Electrical version Lamps ≈kg

···E ···EDD ···EDD + LED-RGB WReflector HR, highly-specular Housing white, with white bezel ring Onperla D2 HR 1TCT13···01 59 141··· ···04 1 x TC-TEL 13 1.9Onperla D2 HR 1TCT18···01 59 142··· ···04 ···07 1 x TC-TEL 18 1.9Onperla D2 HR 1TCT26/32···01 59 144··· ···04 ···07 1 x TC-TEL 26/32 1.9Onperla D2 HR 2TCT13···01 59 146··· ···04 2 x TC-TEL 13 1.9Onperla D2 HR 2TCT18···01 59 147··· ···04 ···07 2 x TC-TEL 18 1.9Housing black, with silver-grey bezel ring Onperla D2 HR 1TCT13···I2 59 174··· ···04 1 x TC-TEL 13 1.9Onperla D2 HR 1TCT18···I2 59 175··· ···04 ···07 1 x TC-TEL 18 1.9Onperla D2 HR 1TCT26/32···I2 59 177··· ···04 ···07 1 x TC-TEL 26/32 1.9Onperla D2 HR 2TCT13···I2 59 179··· ···04 2 x TC-TEL 13 1.9Onperla D2 HR 2TCT18···I2 59 180··· ···04 ···07 2 x TC-TEL 18 1.9LED RGB versions Housing white, with white bezel ring Onperla D2 HR 1TCT18···01 59 143··· ···54 1 x TC-TEL 18 2.2Onperla D2 HR 1TCT26/32···01 59 145··· ···54 1 x TC-TEL 26/32 2.2Onperla D2 HR 2TCT18···01 59 148··· ···54 2 x TC-TEL 18 2.2Housing black, with silver-grey bezel ring Onperla D2 HR 1TCT18···I2 59 176··· ···54 1 x TC-TEL 18 2.2Onperla D2 HR 1TCT26/32···I2 59 178··· ···54 1 x TC-TEL 26/32 2.2Onperla D2 HR 2TCT18···I2 59 181··· ···54 2 x TC-TEL 18 2.2Housing white IP, with white bezel ringOnperla D2 HR IP 1TCT18···01 59 150··· ···04 ···07 1 x TC-TEL 18 2.0Onperla D2 HR IP 1TCT26/32···01 59 151··· ···04 ···07 1 x TC-TEL 26/32 2.0Onperla D2 HR IP 2TCT18···01 59 305··· ···04 ···07 2 x TC-TEL 18 2.0Housing black IP, with silver-grey bezel ringOnperla D2 HR IP 1TCT18···I2 59 182··· ···04 ···07 1 x TC-TEL 18 2.0Onperla D2 HR IP 1TCT26/32···I2 59 183··· ···04 ···07 1 x TC-TEL 26/32 2.0Onperla D2 HR IP 2TCT18···I2 59 184··· ···04 ···07 2 x TC-TEL 18 2.0Reflector BR, facetted Housing white, with white bezel ring Onperla D2 BR 1TCT13···01 59 135··· ···04 1 x TC-TEL 13 1.9Onperla D2 BR 1TCT18···01 59 136··· ···04 ···07 1 x TC-TEL 18 1.9Onperla D2 BR 1TCT26/32···01 59 137··· ···04 ···07 1 x TC-TEL 26/32 1.9Onperla D2 BR 2TCT13···01 59 138··· ···04 2 x TC-TEL 13 1.9Onperla D2 BR 2TCT18···01 59 139··· ···04 ···07 2 x TC-TEL 18 1.9Housing black, with silver-grey bezel ring Onperla D2 BR 1TCT13···I2 59 169··· ···04 1 x TC-TEL 13 1.9Onperla D2 BR 1TCT18···I2 59 170··· ···04 ···07 1 x TC-TEL 18 1.9Onperla D2 BR 1TCT26/32···I2 59 171··· ···04 ···07 1 x TC-TEL 26/32 1.9Onperla D2 BR 2TCT13···I2 59 172··· ···04 2 x TC-TEL 13 1.9Onperla D2 BR 2TCT18···I2 59 173··· ···04 ···07 2 x TC-TEL 18 1.9Reflector MR, semi-specular Housing white, with white bezel ring Onperla D2 MR 1TCT13···01 59 307··· ···04 1 x TC-TEL 13 1.9Onperla D2 MR 1TCT18···01 59 308··· ···04 ···07 1 x TC-TEL 18 1.9Onperla D2 MR 1TCT26/32···01 59 309··· ···04 ···07 1 x TC-TEL 26/32 1.9Onperla D2 MR 2TCT13···01 59 310··· ···04 2 x TC-TEL 13 1.9Onperla D2 MR 2TCT18···01 59 311··· ···04 ···07 2 x TC-TEL 18 1.9Housing black, with silver-grey bezel ring Onperla D2 MR 1TCT13···I2 59 185··· ···04 1 x TC-TEL 13 1.9Onperla D2 MR 1TCT18···I2 59 186··· ···04 ···07 1 x TC-TEL 18 1.9Onperla D2 MR 1TCT26/32···I2 59 187··· ···04 ···07 1 x TC-TEL 26/32 1.9Onperla D2 MR 2TCT13···I2 59 188··· ···04 2 x TC-TEL 13 1.9Onperla D2 MR 2TCT18···I2 59 189··· ···04 ···07 2 x TC-TEL 18 1.9

26

Onperla D2···I2 + Inperla C2 RG-PC

Onperla D2···01 + Inperla C2 RI-PC 01

Onperla D2···I2 + Inperla C2 RG-PC blue

Onperla D2···01 + Inperla C2 RI-PC blue 01 Onperla D2···01 + Inperla C2 RI-PC green 01

Onperla D2···I2 + Inperla C2 RG-PC green

OnperlaDecorative elements

Decorative ring, domed, blueMade of polycarbonate. For downlightsOnperla D2···.

Designation TOC ≈kgInperla C2 RG-PC blue 52 036 00 0.1

Decorative ring, domed, greenMade of polycarbonate. For downlightsOnperla D2···.

Designation TOC ≈kgInperla C2 RG-PC green 52 038 00 0.1

Decorative ring, archedMade of polycarbonate. For downlightsOnperla D2···.

Designation TOC ≈kgInperla C2 RG-PC 51 626 00 0.1

Designation TOC ≈kgInperla C2 RI-PC 01 51 996 00 0.6Inperla C2 RI-PC 03 52 016 00 0.6

Decorative ring, opalMade of polycarbonate. Integrated in decorative die-cast ring, white (···01) or silver-grey (···03). For downlightsOnperla D2···.

Designation TOC ≈kgInperla C2 RI-PC blue 01 52 029 00 0.6Inperla C2 RI-PC blue 03 52 017 00 0.6

Decorative ring, blueMade of polycarbonate. Integrated in decorative die-cast ring, white (···01) or silver-grey (···03). For downlightsOnperla D2···.

Decorative ring, greenMade of polycarbonate. Integrated in decorative die-cast ring, white (···01) or silver-grey (···03). For downlightsOnperla D2···.

Designation TOC ≈kgInperla C2 RI-PC green 01 52 031 00 0.6Inperla C2 RI-PC green 03 52 034 00 0.6

27

Onperla D2···I2 + Inperla C2 RG-PC red

Onperla D2···01 + Inperla C2 RI-PC red 01

Onperla D2···I2 + Inperla C2 RG-PC yellow

Onperla D2···01 + Inperla C2 RI-PC yellow 01

Decorative ring, domed, redMade of polycarbonate. For downlightsOnperla D2···.

Designation TOC ≈kgInperla C2 RG-PC red 52 039 00 0.1

Decorative ring, domed, yellowMade of polycarbonate. For downlightsOnperla D2···.

Designation TOC ≈kgInperla C2 RG-PC yellow 52 037 00 0.1

Decorative ring, redMade of polycarbonate. Integrated in decorative die-cast ring, white (···01) or silver-grey (···03). For downlightsOnperla D2···.

Designation TOC ≈kgInperla C2 RI-PC red 01 52 032 00 0.6Inperla C2 RI-PC red 03 52 035 00 0.6

Decorative ring, yellowMade of polycarbonate. Integrated in decorative die-cast ring, white (···01) or silver-grey (···03). For downlightsOnperla D2···.

Designation TOC ≈kgInperla C2 RI-PC yellow 01 52 030 00 0.6Inperla C2 RI-PC yellow 03 52 033 00 0.6

28

Onperla D2···I2 + Inperla C2 AG-PC 03

Onperla D2···01 + Inperla C2 DR-M

Onperla D2···I2 + Inperla C2 AZ-PC 03

Onperla D2···01 + Inperla C2 DR-TM Onperla D2···01 + Inperla C2 DS-M

Onperla D2···I2 + Inperla C2 DA 03


Decorative cover, domedFor IP54 protection rating from below. Made of polycarbonate. Integrated in decorative die-cast ring, silver-grey.For Onperla D2··· downlights.

Designation TOC ≈kgInperla C2 AG-PC 01 51 986 00 0.7Inperla C2 AG-PC 03 52 005 00 0.7

Decorative cover, cylindricalFor IP54 protection rating from below. Made of polycarbonate. Integrated in decorative die-cast ring, silver-grey.For Onperla D2··· downlights.

Designation TOC ≈kgInperla C2 AZ-PC 01 52 006 00 0.7Inperla C2 AZ-PC 03 51 987 00 0.7

Decorative cover, clearFor IP54 protection rating from below. Made of float glass, integrated in decorative die-cast ring, white (···01) or silver-grey (···03). For Onperla D2··· downlights.

Designation TOC ≈kgInperla C2 DA 01 51 988 00 0.7Inperla C2 DA 03 51 989 00 0.7

Decorative disk, frostedFloat glass. For Onperla D2··· downlights.

Designation TOC ≈kgInperla C2 DS-M 51 980 00 1.1

Decorative rings, frostedFloat glass. For Onperla D2··· downlights.

Designation TOC ≈kgInperla C2 DR-M 51 978 00 0.9

Decorative rings, partly-frostedFloat glass. For Onperla D2··· downlights.

Designation TOC ≈kgInperla C2 DR-TM 51 979 00 0.9

29

Onperla D2···I2 + Inperla C2 DA-M 03

Onperla D2···01 + Inperla C2 DS-TM

Onperla D2···I2 + Inperla C2 DA-TM 03 Onperla D2···I2 + Inperla C2 DD 03

Decorative cover, frostedFor IP54 protection rating from below. Made of float glass, integrated in decorative die-cast ring, white (···01) or silver-grey (···03). For Onperla D2··· downlights.

Designation TOC ≈kgInperla C2 DA-M 01 51 990 00 0.7Inperla C2 DA-M 03 51 991 00 0.7

Decorative cover, partly frostedFor IP54 protection rating from below. Made of float glass, integrated in decorative die-cast ring, white (···01) or silver-grey (···03). For Onperla D2··· downlights.

Designation TOC ≈kgInperla C2 DA-TM 01 51 992 00 0.7Inperla C2 DA-TM 03 51 993 00 0.7

Decorative ringMade of die-cast material, white (···01) or silver-grey ( ···03). For Onperla D2··· downlights.

Designation TOC ≈kgInperla C2 DD 01 51 994 00 0.6Inperla C2 DD 03 51 995 00 0.6

Decorative disk, partly frostedFloat glass. For Onperla D2··· downlights.

Designation TOC ≈kgInperla C2 DS-TM 51 981 00 1.1

30

Onperla D2···I2 + Inperla C2 RK-PC

Onperla D2···01 + Inperla C2 WW-HR

Onperla D2···I2 + Inperla C2 ZH-PC

Onperla D2···01 + Inperla C2 WW-MROnperla D2···01 + Inperla C2 RA-HR

+ Inperla C2 DD 01

Onperla D2···I2 + Inperla C2 ZN-PC


Decorative cone ringMade of polycarbonate. For downlights Onperla D2···.

Designation TOC ≈kgInperla C2 RK-PC 52 018 00 0.3

Decorative cylinder, longMade of polycarbonate. For downlights Onperla D2···.

Designation TOC ≈kgInperla C2 ZH-PC 51 625 00 0.3

Decorative cylinder, shortMade of polycarbonate. For downlights Onperla D2···.

Designation TOC ≈kgInperla C2 ZN-PC 51 624 00 0.3

Designation TOCInperla C2 WW-HR 52 019 00

Wallwasher optics, highly-specularOnly for single lamp luminaires. Made of reflection-intensifying aluminium. For Onperla D2··· downlights.

Wallwasher optics, semi-specularOnly for single lamp luminaires. Made of reflection-intensifying aluminium. For Onperla D2··· downlights.

Cross-blade louvre, highly-specularOf reflection-intensifying aluminium. For Onperla D2··· downlights

Designation TOCInperla C2 WW-MR 52 020 00

Designation TOCInperla C2 RA-HR 52 014 00

31

Onperla ZS···

Onperla D2···01 + Inperla C2 RA-MR+ Inperla C2 DD 01

Wire suspensionWire suspension, 3-point, infinitely variable. In two lengths. For Onperla D2··· downlights. For Onperla D2···LED-RGB···, an additional Onperla ZSAP adapter is required.

Cross-blade louvre, semi-specularOf reflection-intensifying aluminium. For Onperla D2··· downlights.

Designation TOCInperla C2 RA-MR 52 015 00

Designation TOCOnperla ZS 3075/2000 01 59 313 00Onperla ZS 3075/3000 01 59 314 00Onperla ZS 5075/2000 01 59 315 00Onperla ZS 5075/3000 01 59 316 00Onperla ZSAP 59 429 00

DDDeeesssiiggning light

34

Accent lighting that creates emotions.Good general lighting is indispensable, but not suitable for every application. When it’s a matter of highlighting particular details, creating emotions and establishing a unique atmosphere, accent lighting comes into play. TRILUX offers you a wide-ranging portfolio of lighting solutions for all applications with the Scenatic program, ranging from recessed and surface-mounted spots to suspended luminaires and wall luminaires.

Scenatic

35

Discreet light that changes any location into an attraction:Recessed spotlights/downlights – ScenaticPoint

Setting in-scene: room elements, works of art and attractive areas, brilliantly set in-scene.Simple: an essential advantage is the ease of mounting, implemented with pre-wiring ready for connection.Flexible: interchangeable reflector technology allows simple, tool-free replacement of reflectors.

Perfect presentation of rooms and luminaire:Surface-mounted spotlight – ScenaticFlex

Interplay: an elegant luminaire body with attractive surfaces gives any room individuality.Rapid: a 3-circuit adapter enables mounting in one step.Flexible: interchangeable reflector technology allows simple, tool-free replacement of reflectors.

Highlights in every room:Suspended luminaires – ScenaticFlair

Magical: stylish forms and colours lend every type of room a unique flair.High quality: the use of glass and fabrics gives the products a distinguished appearance.Variable: a choice of two mounting methods: via a universal adapter for 3-circuit track or via a ceiling rose.

The perfect complement:Wall luminaires – ScenaticWall

Closing the gap: as a perfect supplement to ceiling illumination: walls become works.Harmonious: the frosted glass shade in red and white creates an attractive light effect.

36

SncPoint 100···03 SncPoint 200···03

6 d a

ScenaticPoint 100···, ScenaticPoint 200···

SncPoint 200· ··Circular recessed spotlight, can be pivoted by 30° and rotated by 355°, for 1 low-voltage halogen reflector lamp QR-CBC 51, max. 50 W. Bezel ring and pivotable light-head die-cast, in two colour variants, powder-coated. Lamps with reflector integrated into light-head. Distribution characteristics based on light source with internal reflector. Tool-free ceiling installation via rapid-mounting springs. Electronic transformer with integral plug connection for tool-free through-wiring is to be ordered separately.···01 White, similar to RAL 9016.···03 Silver-grey, similar to RAL 9006.

SncPoint 100· ··Circular recessed spotlight, can be pivoted by +/– 20°, for 1 low-voltage halogen reflector lamp QR-CBC 51, max. 50 W. Bezel ring and pivotable light-head die-cast, in two colour variants, powder-coated. Lamps with reflector integrated into light head. Distribution charac-teristics based on light source with internal reflector. Tool-free ceiling installation via rapid-mounting springs. Electronic trans-former with integral plug connection for tool-free through-wiring is to be ordered separately.···01 White, similar to RAL 9016.···03 Silver-grey, similar to RAL 9006.

IP20

37

min

. 110

7586

20

10-2

0

105

20

min

. 110

90103

10-2

0

105

30

355

SncPoint 2 00··· SncPoint 1 00···

Lamp data ································193

Designation TOC Colour Lamps Socket ≈kg

SncPoint 100 WSncPoint 100 1QR-CBC51 max50 01 59 514 40 White 1 x QR-CBC 51, 50 W GU5,3 0.8SncPoint 100 1QR-CBC51 max50 03 59 513 40 Silver-grey 1 x QR-CBC 51, 50 W GU5,3 0.8

SncPoint 200SncPoint 200 1QR-CBC51 max50 01 59 516 40 White 1 x QR-CBC 51, 50 W GU5,3 0.8SncPoint 200 1QR-CBC51 max50 03 59 515 40 Silver-grey 1 x QR-CBC 51, 50 W GU5,3 0.8

Accessories TOC Description ≈kg

VE OL-QR/QT 70VA ET 59 734 00 Electronic transformer 0.3VE OL-QR/QT 105VA ET 59 732 00 Electronic transformer 0.3VE OL-QR/QT 150VA ET 59 733 00 Electronic transformer 0.3

38

ScenaticPoint 300

The circular recessed spotlight unites classic design with state-of-the-art LED technology. The result: a harmonious overall appearance and maximum efficiency. The high-performance, highly efficient LED module has a service life of over 50,000 hours and ensures a high degree of lighting comfort thanks to homogeneous illumination with warm white and neutral white light colours. The pivotable luminaire head gives flexibility for both the arrangement of presentation surfaces, and for mounting as well, which can be carried out without need of tools.

39

min

. 200

155176

10-3

0

172

25 25

SncPoint 3 00···LED···

SncPoint 3 00···LED···01

Accessories ······························· 62

Designation TOC Colour Lamps/Luminous flux/ Power consumption ≈kgLight colour

SncPoint 300 HR-FL LED 2000 ww ET 01 59 528 40 White LED/2000 lm/ww 36 W 1.8SncPoint 300 HR-FL LED 2000 nw ET 01 59 530 40 White LED/2000 lm/nw 32 W 1.8SncPoint 300 HR-FL LED 2000 ww ET 03 59 527 40 Silver-grey LED/2000 lm/ww 36 W 1.8SncPoint 300 HR-FL LED 2000 nw ET 03 59 529 40 Silver-grey LED/2000 lm/nw 32 W 1.8

ScenaticPoint 300···LED···

SncPoint 300· ··LED···Circular recessed spotlight, can be pivoted by +/– 25°, total luminous flux 2000 lm, available in two lamp colours.···ww··· Warm white, colour temperature 3000 K, connected load 36 W.···nw··· Neutral white, colour temperature 4000 K, connected load 32 W.Distribution characteristics, Flood. Bezel ring and pivotable light-head with front ring die-cast, in two colour variants, powder-coated. Aluminium reflector, highly-specular, LED module integrated in light-head. Tool-free ceiling installation via rapid-mounting springs. Complete with separate, electronic trans-former and integral strain relief system.···01 White, similar to RAL 9016.···03 Silver-grey, similar to RAL 9006.

6 d a IP20

40



SncPoint 400· ··1HIT···Circular recessed spotlight, can be pivoted in steps by 50° and rotated by 355°, for 1 metal halide lamp HIT-T 35 W or 70 W. Bezel ring and pivotable light-head with front ring die-cast, in two colour variants, powder-coated. Aluminium reflector, facetted, integrated into light-head. Tool-free ceiling installation via rapid-mount-ing springs. Complete with separate electronic control gear and integral plug connection for tool-free through-wiring. ···01 White, similar to RAL 9016.···03 Silver-grey, similar to RAL 9006.

···SP··· Distribution characteristics Spot.···MF··· Distribution characteristics Medium.

SncPoint 400 1QR111···Circular recessed spotlight, can be pivoted in steps by 50° and rotated by 355°, for 1 low-voltage halogen reflector lamp QR-LP 111, max. 100 W. Die-cast bezel ring, pivotable light-head and front ring, in two colour variants, powder-coated. Lamps with reflector integrated into light-head. Distribution char-acteristics based on light source with internal reflector. Tool-free ceiling installation via rapid-mounting springs. Complete with sepa-rate electronic transformer and integral plug connection for tool-free through-wiring.···01 White, similar to RAL 9016.···03 Silver-grey, similar to RAL 9006.

SncPoint 300· ··1HIT···Circular recessed spotlight, can be pivoted by +/– 25°, for 1 metal halide lamp HIT-T 35 W or 70 W. Bezel ring and pivotable light-head with front ring die-cast, in two colour variants, powder-coated. Aluminium reflector, facetted, integrated into light-head. Tool-free ceiling installation via rapid-mounting springs. Complete with separate electronic control gear and integral plug connection for tool-free through-wiring.···01 White, similar to RAL 9016.···03 Silver-grey, similar to RAL 9006.


SncPoint 300 1QR111···Circular recessed spotlight, can be pivoted by +/– 25°, for 1 low-voltage halogen reflector lamp QR-LP 111, max. 100 W. Bezel ring and pivotable light-head with front ring die-cast, in two colour variants, powder-coated. Lamps with reflector integrated into light-head. Distribution characteristics based on light source with internal reflector. Tool-free ceiling installation via rapid-mounting springs. Complete with separate electronic transform-er and integral plug connection for tool-free through-wiring.···01 White, similar to RAL 9016.···03 Silver-grey, similar to RAL 9006.

6 d a IP20

41

min

. 160

155176

10-3

0

147

25 25

min

. 110

155176

10-3

0

109

25 25

min

. 150

175

50

196

355

10-3

0

155

SncPoint 4 00··· SncPoint 300· ··1HIT··· SncPoint 300 1QR111···



SncPoint 300 WSncPoint 300 BR-SP 1HIT35 E 01 59 518 04 White 1 x HIT-T, 35 W G12 1.7SncPoint 300 BR-MF 1HIT35 E 01 59 522 04 White 1 x HIT-T, 35 W G12 1.7SncPoint 300 BR-SP 1HIT70 E 01 59 520 04 White 1 x HIT-T, 70 W G12 1.7SncPoint 300 BR-MF 1HIT70 E 01 59 524 04 White 1 x HIT-T, 70 W G12 1.7SncPoint 300 BR-SP 1HIT35 E 03 59 517 04 Silver-grey 1 x HIT-T, 35 W G12 1.7SncPoint 300 BR-MF 1HIT35 E 03 59 521 04 Silver-grey 1 x HIT-T, 35 W G12 1.7SncPoint 300 BR-SP 1HIT70 E 03 59 519 04 Silver-grey 1 x HIT-T, 70 W G12 1.7SncPoint 300 BR-MF 1HIT70 E 03 59 523 04 Silver-grey 1 x HIT-T, 70 W G12 1.7SncPoint 300 1QR111 max100 ET 01 59 526 40 White 1 x QR-LP 111, 100 W GU53 1.7SncPoint 300 1QR111 max100 ET 03 59 525 40 Silver-grey 1 x QR-LP 111, 100 W GU53 1.7

SncPoint 400SncPoint 400 BR-SP 1HIT35 E 01 59 532 04 White 1 x HIT-T, 35 W G12 1.9SncPoint 400 BR-MF 1HIT35 E 01 59 536 04 White 1 x HIT-T, 35 W G12 1.9SncPoint 400 BR-SP 1HIT70 E 01 59 534 04 White 1 x HIT-T, 70 W G12 1.9SncPoint 400 BR-MF 1HIT70 E 01 59 538 04 White 1 x HIT-T, 70 W G12 1.9SncPoint 400 BR-SP 1HIT35 E 03 59 531 04 Silver-grey 1 x HIT-T, 35 W G12 1.9SncPoint 400 BR-MF 1HIT35 E 03 59 535 04 Silver-grey 1 x HIT-T, 35 W G12 1.9SncPoint 400 BR-SP 1HIT70 E 03 59 533 04 Silver-grey 1 x HIT-T, 70 W G12 1.9SncPoint 400 BR-MF 1HIT70 E 03 59 537 04 Silver-grey 1 x HIT-T, 70 W G12 1.9SncPoint 400 1QR111 max100 ET 01 59 540 40 White 1 x QR-LP 111, 100 W GU53 1.8SncPoint 400 1QR111 max100 ET 03 59 539 40 Silver-grey 1 x QR-LP 111, 100 W GU53 1.8

42

min

. 203

10-3

0

165

190209

30 30190209

30 30370387

30 30550565

30 30

SncPoint 5 ···



SncPoint 5···1HIT···Rectangular recessed spotlight as···510··· Single module for 1 metal halide lamp HIT-T 35 W or 70 W.···520··· Double module for 2 metal halide lamps HIT-T 35 W or 70 W.···530··· Triple module for 3 metal halide lamps HIT-T 35 W or 70 W. Light-heads are gimbal-mounted via two axes, can be pivoted by +/– 60°. Die-cast ceiling re-cess frame and spotlight heads in two colour variants, powder-coated. Aluminium reflec-tors, facetted, integrated into light-heads. Tool-free ceiling installation via rapid-mount-ing springs. Front ring with bayonet catch enables tool-free relamping and inserting of reflector. Complete with separate electronic control gear and integral plug connection for tool-free through-wiring.···01 White, similar to RAL 9016.···03 Silver-grey, similar to RAL 9006.


SncPoint 5···QR111···Rectangular recessed spotlight as···510··· Single module for 1 low-voltage halo-gen reflector lamp QR-LP 111, max.100 W. ···520··· Double module for 2 low-voltage halo-gen reflector lamps QR-LP 111, max.100 W.···530··· Triple module for 3 low-voltage halo-gen reflector lamps QR-LP 111, max. 100 W.Light-heads are gimbal-mounted via two axes, can be pivoted by +/– 60°. Die-cast ceiling recess frame and light-heads in two colour variants, powder-coated. Light-heads for lamps with reflector. Distribution characteris-tics based on light source with internal reflec-tor. Tool-free ceiling installation via rapid-mounting springs. Complete with separate electronic transformer and integral plug connection for tool-free through-wiring. ···01 White, similar to RAL 9016.···03 Silver-grey, similar to RAL 9006.

SncPoint 6···QR-CBC51···Rectangular recessed spotlight as···610··· Single module for 1 low-voltage halo-gen reflector lamp QR-CBC 51, max. 50 W.···620··· Double module for 2 low-voltage halo-gen reflector lamps QR-CBC 51, max. 50 W.···630··· Triple module for 3 low-voltage halo-gen reflector lamps QR-CBC 51, max. 50 W.Light-heads are gimbal-mounted via two axes, can be pivoted by +/– 60°. Die-cast ceiling recess frame and light-heads, in two colour variants, powder-coated. Light-heads with retaining ring as lamp holder for lamps with reflector. Distribution characteristics based on light source with internal reflector. Tool-free ceiling installation via rapid-mounting springs. Complete with separate electronic transformer and integral plug connection for tool-free through-wiring. ···01 White, similar to RAL 9016.···03 Silver-grey, similar to RAL 9006.

6 d a IP20

43

min

.190

10-3

0

100

96108

30 30 30 3096

108

30 30191203

30 30286298

SncPoint 6 ···

Accessories ······························· 62Lamp data ································193


SncPoint 510 W SncPoint 510 BR-SP 1HIT35 E 01 59 542 04 White 1 x HIT-T, 35 W G12 2.2 SncPoint 510 BR-MF 1HIT35 E 01 59 546 04 White 1 x HIT-T, 35 W G12 2.2 SncPoint 510 BR-SP 1HIT70 E 01 59 544 04 White 1 x HIT-T, 70 W G12 2.2 SncPoint 510 BR-MF 1HIT70 E 01 59 548 04 White 1 x HIT-T, 70 W G12 2.2 SncPoint 510 BR-SP 1HIT35 E 03 59 541 04 Silver-grey 1 x HIT-T, 35 W G12 2.2 SncPoint 510 BR-MF 1HIT35 E 03 59 545 04 Silver-grey 1 x HIT-T, 35 W G12 2.2 SncPoint 510 BR-SP 1HIT70 E 03 59 543 04 Silver-grey 1 x HIT-T, 70 W G12 2.2 SncPoint 510 BR-MF 1HIT70 E 03 59 547 04 Silver-grey 1 x HIT-T, 70 W G12 2.2 SncPoint 510 1QR111 max100 ET 01 59 550 40 White 1 x QR-LP 111, 100 W GU53 2.1 SncPoint 510 1QR111 max100 ET 03 59 549 40 Silver-grey 1 x QR-LP 111, 100 W GU53 2.1

SncPoint 520 SncPoint 520 BR-SP 2HIT35 E 01 59 552 04 White 2 x HIT-T, 35 W G12 4.0 SncPoint 520 BR-MF 2HIT35 E 01 59 556 04 White 2 x HIT-T, 35 W G12 4.0 SncPoint 520 BR-SP 2HIT70 E 01 59 554 04 White 2 x HIT-T, 70 W G12 4.0 SncPoint 520 BR-MF 2HIT70 E 01 59 558 04 White 2 x HIT-T, 70 W G12 4.0 SncPoint 520 BR-SP 2HIT35 E 03 59 551 04 Silver-grey 2 x HIT-T, 35 W G12 4.0 SncPoint 520 BR-MF 2HIT35 E 03 59 555 04 Silver-grey 2 x HIT-T, 35 W G12 4.0 SncPoint 520 BR-SP 2HIT70 E 03 59 553 04 Silver-grey 2 x HIT-T, 70 W G12 4.0 SncPoint 520 BR-MF 2HIT70 E 03 59 557 04 Silver-grey 2 x HIT-T, 70 W G12 4.0 SncPoint 520 2QR111 max100 ET 01 59 560 40 White 2 x QR-LP 111, 100 W GU53 3.8 SncPoint 520 2QR111 max100 ET 03 59 559 40 Silver-grey 2 x QR-LP 111, 100 W GU53 3.8

SncPoint 530 SncPoint 530 BR-SP 3HIT35 E 01 59 562 04 White 3 x HIT-T, 35 W G12 5.8 SncPoint 530 BR-MF 3HIT35 E 01 59 566 04 White 3 x HIT-T, 35 W G12 5.8 SncPoint 530 BR-SP 3HIT70 E 01 59 564 04 White 3 x HIT-T, 70 W G12 5.8 SncPoint 530 BR-MF 3HIT70 E 01 59 568 04 White 3 x HIT-T, 70 W G12 5.8 SncPoint 530 BR-SP 3HIT35 E 03 59 561 04 Silver-grey 3 x HIT-T, 35 W G12 5.8 SncPoint 530 BR-MF 3HIT35 E 03 59 565 04 Silver-grey 3 x HIT-T, 35 W G12 5.8 SncPoint 530 BR-SP 3HIT70 E 03 59 563 04 Silver-grey 3 x HIT-T, 70 W G12 5.8 SncPoint 530 BR-MF 3HIT70 E 03 59 567 04 Silver-grey 3 x HIT-T, 70 W G12 5.8 SncPoint 530 3QR111 max100 ET 01 59 570 40 White 3 x QR-LP 111, 100 W GU53 5.5 SncPoint 530 3QR111 max100 ET 03 59 569 40 Silver-grey 3 x QR-LP 111, 100 W GU53 5.5

SncPoint 610 SncPoint 610 1QR-CBC51 max50 ET 01 59 572 40 White 1 x QR-CBC 51, 50 W GU5,3 0.7 SncPoint 610 1QR-CBC51 max50 ET 03 59 571 40 Silver-grey 1 x QR-CBC 51, 50 W GU5,3 0.7

SncPoint 620SncPoint 620 2QR-CBC51 max50 ET 01 59 574 40 White 2 x QR-CBC 51, 50 W GU5,3 1.3 SncPoint 620 2QR-CBC51 max50 ET 03 59 573 40 Silver-grey 2 x QR-CBC 51, 50 W GU5,3 1.3

SncPoint 630SncPoint 630 3QR-CBC51 max50 ET 01 59 576 40 White 3 x QR-CBC 51, 50 W GU5,3 2.0 SncPoint 630 3QR-CBC51 max50 ET 03 59 575 40 Silver-grey 3 x QR-CBC 51, 50 W GU5,3 2.0

44

ScenaticPoint 700

Square, effective, and highly efficient: the SncPoint 700 recessed downlight unites a highly pleasing design with a great deal of efficiency. The luminaire is suitable for lighting corridors, foyers and office areas, in fact every application requiring a pleasant and homogeneous light distribution. The high-perform-ance LED module expounds maximum efficiency with a service life in excess of 50,000 hours, and in addition promises a very high level of light comfort and excellent colour quality.

45

min

. 180

10-3

0

167

195210

SncPoint 7 00···

SncPoint 7 00···03

Designation TOC Colour Lamps/Luminous flux/ Power consumption ≈kgLight colour

SncPoint 700 HR-FL LED 2000 ww ET 01 59 578 40 White LED/2000 lm/ww 36 W 2.4SncPoint 700 HR-FL LED 2000 nw ET 01 59 580 40 White LED/2000 lm/nw 32 W 2.4SncPoint 700 HR-FL LED 2000 ww ET 03 59 577 40 Silver-grey LED/2000 lm/ww 36 W 2.4SncPoint 700 HR-FL LED 2000 nw ET 03 59 579 40 Silver-grey LED/2000 lm/nw 32 W 2.4

ScenaticPoint 700···LED···

SncPoint 700· ··Rectangular recessed downlight with 1 LED module, total luminous flux 2000 lm, available in two lamp colours.···ww··· Warm white, colour temperature 3000 K, connected load 36 W.···nw··· Neutral white, colour temperature 4000 K, connected load 32 W.Ceiling mounting frame of steel, in two colour variants, powder-coated. Aluminium reflector, highly specular. Tool-free ceiling installation via rapid-mounting springs. Complete with separate electronic transformer and integral plug connection for tool-free through-wiring.···01 White, similar to RAL 9016.···03 Silver-grey, similar to RAL 9006.

···FL··· Distribution characteristics Flood.

6 d a IP20

46

ScenaticPoint 800

Homogeneous wide-area lighting from varying positions: the TRILUX ScenaticPoint 800 recessed wallwasher can be very flexibly used thanks to its pivotable function and flat, space-saving construction. The discreet design and generous light distribution are optimally suited for use in all types of presentation areas. Relamping is seldom necessary, but completely free of tools.

47

SncPoint 800···03

min

. 125

135

45

158

10-3

0

105

300270

SncPoint 8 00···

Lamp data ································193


WSncPoint 800 HS-FL 1HIT35 E 01 59 582 04 White 1 x HIT-T, 35 W G12 2.0 SncPoint 800 HS-FL 1HIT70 E 01 59 584 04 White 1 x HIT-T, 70 W G12 2.0 SncPoint 800 HS-FL 1HIT150 E 01 59 586 04 White 1 x HIT-T, 150 W G12 2.0 SncPoint 800 HS-FL 1HIT35 E 03 59 581 04 Silver-grey 1 x HIT-T, 35 W G12 2.0 SncPoint 800 HS-FL 1HIT70 E 03 59 583 04 Silver-grey 1 x HIT-T, 70 W G12 2.0 SncPoint 800 HS-FL 1HIT150 E 03 59 585 04 Silver-grey 1 x HIT-T, 150 W G12 2.0

ScenaticPoint 800···

SncPoint 800· ··1HIT···Rectangular recessed spotlight for illumination of vertical surfaces, for 1 metal halide lamp HIT-T 35 W, 70 W or 150 W, can be pivoted in 9 lockable steps by 45°. Die-cast ceiling recess frame and pivotable reflector housing, in two colour variants, powder-coated. Aluminium reflector, facetted, integrated in reflector housing. Tool-free ceiling installation via rapid-mounting springs. Complete with separate electronic control gear and integral plug con-nection for tool-free through-wiring.···01 White, similar to RAL 9016.···03 Silver-grey, similar to RAL 9006.

···FL··· Distribution characteristics Flood.

6 d a IP20

48

SncFlex 200···03 SncFlex 1 00···03 SncFlex 300···25

ScenaticFlex 100···, ScenaticFlex 200···, ScenaticFlex 300···

SncFlex 100···Surface-mounted spotlight for 3-circuit track, can be pivoted by 90° and rotated by 355°, for 1 metal halide lamp HIT-T 20 W or 35 W. Die-cast reflector housing and control gear housing, in two colour variants, powder-coated. Control gear housing thermally separated and asymmetrically positioned. Aluminium reflec-tor, facetted, integrated in reflector housing. Front ring with bayonet catch for relamping and replacement of reflector unit. Spotlight com-plete with 3-circuit track adapter and integral electronic control gear.···01 White, similar to RAL 9016, 3-circuit adapter white.···03 Silver-grey, similar to RAL 9006, 3-circuit adapter black.


SncFlex 200···Surface-mounted spotlight for 3-circuit track, can be pivoted by 90° and rotated by 355°, for 1 metal halide lamp HIT-T 35 W or 70 W. Die-cast reflector housing and control gear housing, in two colour variants, powder-coated. Control gear housing thermally separated and asymmetrically positioned. Aluminium reflec-tor, facetted, integrated in reflector housing. Front ring with bayonet catch for relamping and replacement of reflector unit. Spotlight com-plete with 3-circuit track adapter and integral electronic control gear.···01 White, similar to RAL 9016, 3-circuit adapter white.···03 Silver-grey, similar to RAL 9006, 3-circuit adapter black.


SncFlex 300···Decorative surface-mounted spotlight with frosted white glass shade for 3-circuit track, can be pivoted by 90° and rotated by 355°, for 1 metal halide lamp HIT-T 35 W or 70 W. Thermally separated control gear housing for ballast and die-cast reflector front ring, silver-grey powder-coated. Aluminium reflec-tor, facetted, integrated in glass shade. Front ring with bayonet catch for relamping and replacement of reflector unit. Glass shade is diffusely backlit for decorative indirect light component. Spotlight complete with 3-circuit track adapter and electronic control gear. ···25 Shade colour white, adapter black.···53 Shade colour red, adapter black.


6 d a IP20

49

169

256

355

90

165 146

169

190

90

295 355

148

141

120

206

355

111

90

SncFlex 2 00··· SncFlex 300··· SncFlex 1 00···



SncFlex 100 W SncFlex 100 BR-SP 1HIT-TC20 E 01 59 593 04 White 1 x HIT-TC, 20 W PGJ5 1.0 SncFlex 100 BR-MF 1HIT-TC20 E 01 59 597 04 White 1 x HIT-TC, 20 W PGJ5 1.0 SncFlex 100 BR-SP 1HIT-TC35 E 01 59 594 04 White 1 x HIT-TC, 35 W PGJ5 1.0 SncFlex 100 BR-MF 1HIT-TC35 E 01 59 598 04 White 1 x HIT-TC, 35 W PGJ5 1.0 SncFlex 100 BR-SP 1HIT-TC20 E 03 59 591 04 Silver-grey 1 x HIT-TC, 20 W PGJ5 1.0 SncFlex 100 BR-MF 1HIT-TC20 E 03 59 595 04 Silver-grey 1 x HIT-TC, 20 W PGJ5 1.0 SncFlex 100 BR-SP 1HIT-TC35 E 03 59 592 04 Silver-grey 1 x HIT-TC, 35 W PGJ5 1.0 SncFlex 100 BR-MF 1HIT-TC35 E 03 59 596 04 Silver-grey 1 x HIT-TC, 35 W PGJ5 1.0

SncFlex 200 SncFlex 200 BR-SP 1HIT35 E 01 59 600 04 White 1 x HIT-T, 35 W G12 2.2 SncFlex 200 BR-MF 1HIT35 E 01 59 604 04 White 1 x HIT-T, 35 W G12 2.2 SncFlex 200 BR-SP 1HIT70 E 01 59 602 04 White 1 x HIT-T, 70 W G12 2.2 SncFlex 200 BR-MF 1HIT70 E 01 59 606 04 White 1 x HIT-T, 70 W G12 2.2 SncFlex 200 BR-SP 1HIT35 E 03 59 599 04 Silver-grey 1 x HIT-T, 35 W G12 2.2 SncFlex 200 BR-MF 1HIT35 E 03 59 603 04 Silver-grey 1 x HIT-T, 35 W G12 2.2 SncFlex 200 BR-SP 1HIT70 E 03 59 601 04 Silver-grey 1 x HIT-T, 70 W G12 2.2 SncFlex 200 BR-MF 1HIT70 E 03 59 605 04 Silver-grey 1 x HIT-T, 70 W G12 2.2

SncFlex 300 SncFlex 300 BR-SP 1HIT35 E 25 59 607 04 Shade white 1 x HIT-T, 35 W G12 2.4 SncFlex 300 BR-MF 1HIT35 E 25 59 611 04 Shade white 1 x HIT-T, 35 W G12 2.4 SncFlex 300 BR-SP 1HIT70 E 25 59 609 04 Shade white 1 x HIT-T, 70 W G12 2.4 SncFlex 300 BR-MF 1HIT70 E 25 59 613 04 Shade white 1 x HIT-T, 70 W G12 2.4 SncFlex 300 BR-SP 1HIT35 E 53 59 608 04 Shade red 1 x HIT-T, 35 W G12 2.4 SncFlex 300 BR-MF 1HIT35 E 53 59 612 04 Shade red 1 x HIT-T, 35 W G12 2.4 SncFlex 300 BR-SP 1HIT70 E 53 59 610 04 Shade red 1 x HIT-T, 70 W G12 2.4 SncFlex 300 BR-MF 1HIT70 E 53 59 614 04 Shade red 1 x HIT-T, 70 W G12 2.4

50

SncFlex 400···03 SncFlex 500···03

ScenaticFlex 400···, ScenaticFlex 500···

SncFlex 400···1HIT···Surface-mounted spotlight for 3-circuit track, can be pivoted by 180° and rotated by 355°, for 1 metal halide lamp HIT-T 35 W or 70 W. Die-cast reflector housing and thermally separated control gear housing, in two colour variants, powder-coated. Aluminium reflector, facetted, integrated in reflector housing. Front ring with bayonet catch for relamping and replacement of reflector unit. Spotlight complete with 3-circuit track adapter and electronic control gear.···01 White, similar to RAL 9016, 3-circuit adapter white.···03 Silver-grey, similar to RAL 9006, 3-circuit adapter black.


SncFlex 400 1QR111···Surface-mounted spotlight for 3-circuit track, can be pivoted by 180° and rotated by 355°, for 1 low-voltage halogen reflector lamp R-LP 111, max. 100 W. Die-cast reflector housing and thermally separated control gear housing, in two colour variants, powder-coated. Reflec-tor housing for lamps with internal reflector. Distribution characteristics based on light source with internal reflector. Spotlight com-plete with 3-circuit track adapter and electronic t ransformer.···01 White, similar to RAL 9016, 3-circuit adapter white.···03 Silver-grey, similar to RAL 9006, 3-circuit adapter black.

SncFlex 500···Surface-mounted spotlight for 3-circuit track, can be pivoted by 180° and rotated by 355°, for 1 metal halide lamp HIT-T 35 W or 70 W. Pivotable reflector housing of deep-drawn steel, integrated in pivotable holder, powder-coated. Aluminium reflector, facetted, inte-grated in reflector housing. Front ring with bayonet catch for relamping and replacement of reflector unit. Spotlight complete with 3-circuit track adapter and integral electronic control gear.···03 Silver-grey, similar to RAL 9006,3-circuit adapter black.


6 d a IP20

51

300

193

123180

83

132

152

320

180

256

355

SncFlex 4 00··· SncFlex 5 00···



SncFlex 400 W SncFlex 400 BR-SP 1HIT35 E 01 59 616 04 White 1 x HIT-T, 35 W G12 2.0 SncFlex 400 BR-MF 1HIT35 E 01 59 620 04 White 1 x HIT-T, 35 W G12 2.0 SncFlex 400 BR-SP 1HIT70 E 01 59 618 04 White 1 x HIT-T, 70 W G12 2.0 SncFlex 400 BR-MF 1HIT70 E 01 59 622 04 White 1 x HIT-T, 70 W G12 2.0 SncFlex 400 BR-SP 1HIT35 E 03 59 615 04 Silver-grey 1 x HIT-T, 35 W G12 2.0 SncFlex 400 BR-MF 1HIT35 E 03 59 619 04 Silver-grey 1 x HIT-T, 35 W G12 2.0 SncFlex 400 BR-SP 1HIT70 E 03 59 617 04 Silver-grey 1 x HIT-T, 70 W G12 2.0 SncFlex 400 BR-MF 1HIT70 E 03 59 621 04 Silver-grey 1 x HIT-T, 70 W G12 2.0 SncFlex 400 1QR111 max100 ET 01 59 624 40 White 1 x QR-LP 111, 100 W GU53 1.8 SncFlex 400 1QR111 max100 ET 03 59 623 40 Silver-grey 1 x QR-LP 111, 100 W GU53 1.8

SncFlex 500 SncFlex 500 BR-SP 1HIT35 E 03 59 625 04 Silver-grey 1 x HIT-T, 35 W G12 4.3 SncFlex 500 BR-MF 1HIT35 E 03 59 629 04 Silver-grey 1 x HIT-T, 35 W G12 4.3 SncFlex 500 BR-SP 1HIT70 E 03 59 626 04 Silver-grey 1 x HIT-T, 70 W G12 4.3 SncFlex 500 BR-MF 1HIT70 E 03 59 630 04 Silver-grey 1 x HIT-T, 70 W G12 4.3

52

145

max

. 200

0

57

165

25

80

min

. 110

SncFlair 100 3P··· ···H3···

SncFlair 200··· SncFlair 1 00··· SncFlair 300···

ScenaticFlair 100···, ScenaticFlair 200···, ScenaticFlair 300···

SncFlair 100···Decorative circular suspended luminaire with convex white glass shade for 1 low-voltage halogen lamp QT 12. Glass shade with diffuse distribution for decorative indirect component. Luminaires for suspension height 2.0 m, complete with transparent mains cable, wire suspension and electronic transformer.···3P··· For 3-circuit track complete with 3-circuit track adapter in white.···H3··· For ceiling mounting with ceiling rose in silver-grey.

SncFlair 200···Decorative circular suspended luminaire with frosted glass shade in two colour variants.···QT··· With E27 lampholder for 1 high-voltage halogen lamp QT 32, max. 100 W or 1 LED lamp (see lamp table). No ballast, lamp oper-ation via direct mains voltage.···1TCT··· For 1 compact fluorescent lamp TC-TEL 26/32/42 W. With separate electronic control gear. Glass shade is homogeneously illuminated for decorative indirect light component. Luminaires for suspension length 2.0 m, complete with transparent mains cable for wire suspension.···3P··· For 3-circuit track complete with 3-circuit track adapter in white.···H3··· For ceiling mounting with ceiling rose in silver-grey.···25 Shade colour white.···53 Shade colour red.

SncFlair 300···Decorative circular suspended luminaire with frosted glass shade in two colour variants and transparent overglass.···QT··· With E27 lampholder for 1 high-voltage halogen lamp QT 32, max. 100 W or 1 LED lamp (see lamp table). No ballast, lamp operation via direct mains voltage.···1TCT··· For 1 compact fluorescent lamp TC-TEL 26/32/42 W. With separate electronic control gear. Glass shade is homogeneously illuminated for decorative indirect light component. Luminaires for suspension length 2.0 m, complete with transparent mains cable for wire suspension.···3P··· For 3-circuit track complete with 3-circuit track adapter in white.···H3··· For ceiling mounting with ceiling rose in silver-grey.···25 Shade colour white.···53 Shade colour red.

IP20 6 d a

53

190

max

. 200

0

25

148

80

225

max

. 200

0

300

25

80175

82

175

82

SncFlair 200 H3 1E27··· SncFlair 300 H3 1E27······H3 1TCT26/32··· ···H3 1TCT26/32···

175 94 175 94

···3P 1E27······3P 1TCT26/32··· ···3P 1TCT26/32··· ···3P 1E27···

···3P 1E27··· ···H3···

Lamp data ································193


SncFlair 100 Shade W SncFlair 100 3P 1QT12 max35 ET 25 59 633 40 White 1 x QT 12-ax, 35 W GY6,35 0.8 SncFlair 100 H3 1QT12 max35 ET 25 59 634 40 White 1 x QT 12-ax, 35 W GY6,35 0.8

SncFlair 200 SncFlair 200 3P 1E27 max100 25 59 635 10 White 1 x QT-E27, 100 W E27 1.6 SncFlair 200 H3 1E27 max100 25 59 639 10 White 1 x QT-E27, 100 W E27 1.6 SncFlair 200 3P 1E27 max100 53 59 636 10 Red 1 x QT-E27, 100 W E27 1.6 SncFlair 200 H3 1E27 max100 53 59 640 10 Red 1 x QT-E27, 100 W E27 1.6 SncFlair 200 3P 1TCT26/32 E 25 59 637 04 White 1 x TC-TEL, 26/32 W G24-q3 2.5 SncFlair 200 H3 1TCT26/32 E 25 59 641 04 White 1 x TC-TEL, 26/32 W G24-q3 2.5 SncFlair 200 3P 1TCT26/32 E 53 59 638 04 Red 1 x TC-TEL, 26/32 W G24-q3 2.5 SncFlair 200 H3 1TCT26/32 E 53 59 642 04 Red 1 x TC-TEL, 26/32 W G24-q3 2.5

SncFlair 300 SncFlair 300 3P 1E27 max100 25 59 643 10 White 1 x QT-E27, 100 W E27 6.1 SncFlair 300 H3 1E27 max100 25 59 647 10 White 1 x QT-E27, 100 W E27 6.1 SncFlair 300 3P 1E27 max100 53 59 644 10 Red 1 x QT-E27, 100 W E27 6.1 SncFlair 300 H3 1E27 max100 53 59 648 10 Red 1 x QT-E27, 100 W E27 6.1 SncFlair 300 3P 1TCT26/32 E 25 59 645 04 White 1 x TC-TEL, 26/32 W G24-q3 6.8 SncFlair 300 H3 1TCT26/32 E 25 59 649 04 White 1 x TC-TEL, 26/32 W G24-q3 6.8 SncFlair 300 3P 1TCT26/32 E 53 59 646 04 Red 1 x TC-TEL, 26/32 W G24-q3 6.8 SncFlair 300 H3 1TCT26/32 E 53 59 650 04 Red 1 x TC-TEL, 26/32 W G24-q3 6.8

54

SncFlair 400··· SncFlair 500···

ScenaticFlair 400···, ScenaticFlair 500···

SncFlair 400···1TCT···Decorative circular suspended luminaire with fabric shade in two colour variants for 1 com-pact fluorescent lamp, TC-TEL 26/32/42 W. Fabric shade, 360 mm, of flame-resistant fab-ric, fire resistance class B1, conically tapering. Luminaire head of steel, brushed, with integral electronic control gear. Luminaires for suspen-sion length 3.0 m, complete with transparent mains cable and wire suspension consisting of two steel cords as protection against twisting.···3P··· For 3-circuit track complete with 3-circuit track adapter in white.···H3··· For ceiling mounting with ceiling rose in silver-grey.···25 Shade colour white.···53 Shade colour red.

SncFlair 400···LED···Decorative circular suspended luminaire with fabric shade in two colour variants with LED module, total luminous flux 2000 lm, light colours warm white and neutral white, connected load 36 W (ww) and 32 W (nw), colour temperature 3000 K and 4000 K. Fabric shade, ¶ 360 mm, of flame-resistant fabric, fire resistance class B1, conically tapering. Luminaire head of steel, brushed, with integral electronic transformer. Luminaires for suspen-sion length 3.0 m, complete with transparent mains cable and wire suspension consisting of two steel cords as protection against twisting.···3P··· For 3-circuit track complete with 3-circuit track adapter in white.···H3··· For ceiling mounting with ceiling rose in silver-grey.···25 Shade colour white.···53 Shade colour red.

SncFlair 500···LED···Decorative square suspended luminaire with fabric shade in two colour variants with LED module, total luminous flux 2000 lm, light colours warm white and neutral white, con-nected load 36 W (ww) and 32 W (nw), colour temperature 3000 K and 4000 K. Fabric shade, 360 mm x 360 mm, of flame-resistant fabric, fire resistance class B1, conically tapering. Luminaire head of steel, brushed, with integral electronic transformer. Luminaires for suspen-sion length 3.0 m, complete with transparent mains cable and wire suspension consisting of two steel cords as protection against twisting.···3P··· For 3-circuit track complete with 3-circuit track adapter in white.···H3··· For ceiling mounting with ceiling rose in silver-grey.···25 Shade colour white.···53 Shade colour red.

SncFlair 500···1TCT···Decorative square suspended luminaire with fabric shade in two colour variants for 1 com-pact fluorescent lamp, TC-TEL 26/32/42 W. Fabric shade, 360 mm x 360 mm, of flame- resistant fabric, fire resistance class B1, conically tapering. Luminaire head of steel, brushed, with integral electronic control gear. Luminaires for suspension length 3.0 m, complete with transparent mains cable and wire suspension consisting of two steel cords as protection against twisting.···3P··· For 3-circuit track complete with 3-circuit track adapter in white.···H3··· For ceiling mounting with ceiling rose in silver-grey.···25 Shade colour white.···53 Shade colour red.

6 d a IP20

55

620

max

. 300

0

360

620

max

. 300

0

360

25

80

25

80

···3P··· ···H3···

Lamp data ································193

Designation TOC Colour Lamps/ Power Socket ≈kgLuminous flux/ consumption

SncFlair 400 Shade Light colour SncFlair 400 3P LED 2000 ww ET 25 59 651 40 White LED/2000 lm/ww 36 W – 2.6 SncFlair 400 H3 LED 2000 ww ET 25 59 657 40 White LED/2000 lm/ww 36 W – 2.6 SncFlair 400 3P LED 2000 nw ET 25 59 653 40 White LED/2000 lm/nw 32 W – 2.6 SncFlair 400 H3 LED 2000 nw ET 25 59 659 40 White LED/2000 lm/nw 32 W – 2.6 SncFlair 400 3P LED 2000 ww ET 53 59 652 40 Red LED/2000 lm/ww 36 W – 2.6 SncFlair 400 H3 LED 2000 ww ET 53 59 658 40 Red LED/2000 lm/ww 36 W – 2.6 SncFlair 400 3P LED 2000 nw ET 53 59 654 40 Red LED/2000 lm/nw 32 W – 2.6 SncFlair 400 H3 LED 2000 nw ET 53 59 660 40 Red LED/2000 lm/nw 32 W – 2.6 SncFlair 400 3P 1TCT26/32/42 E 25 59 655 04 White 1 x TC-TEL, 42 W – G24-q4 2.4 SncFlair 400 H3 1TCT26/32/42 E 25 59 661 04 White 1 x TC-TEL, 42 W – G24-q4 2.4 SncFlair 400 3P 1TCT26/32/42 E 53 59 656 04 Red 1 x TC-TEL, 42 W – G24-q4 2.4 SncFlair 400 H3 1TCT26/32/42 E 53 59 662 04 Red 1 x TC-TEL, 42 W – G24-q4 2.4

SncFlair 500 SncFlair 500 3P LED 2000 ww ET 25 59 663 40 White LED/2000 lm/ww 36 W – 2.7 SncFlair 500 H3 LED 2000 ww ET 25 59 669 40 White LED/2000 lm/ww 36 W – 2.7 SncFlair 500 3P LED 2000 nw ET 25 59 665 40 White LED/2000 lm/nw 32 W – 2.7 SncFlair 500 H3 LED 2000 nw ET 25 59 671 40 White LED/2000 lm/nw 32 W – 2.7 SncFlair 500 3P LED 2000 ww ET 53 59 664 40 Red LED/2000 lm/ww 36 W – 2.7 SncFlair 500 H3 LED 2000 ww ET 53 59 670 40 Red LED/2000 lm/ww 36 W – 2.7 SncFlair 500 3P LED 2000 nw ET 53 59 666 40 Red LED/2000 lm/nw 32 W – 2.7 SncFlair 500 H3 LED 2000 nw ET 53 59 672 40 Red LED/2000 lm/nw 32 W – 2.7 SncFlair 500 3P 1TCT26/32/42 E 25 59 667 04 White 1 x TC-TEL, 42 W – G24-q4 2.4 SncFlair 500 H3 1TCT26/32/42 E 25 59 673 04 White 1 x TC-TEL, 42 W – G24-q4 2.4 SncFlair 500 3P 1TCT26/32/42 E 53 59 668 04 Red 1 x TC-TEL, 42 W – G24-q4 2.4 SncFlair 500 H3 1TCT26/32/42 E 53 59 674 04 Red 1 x TC-TEL, 42 W – G24-q4 2.4

SncFlair 500 3P··· SncFlair 4 00 3 P··· ···H3··· ···H3···

56

SncWall 100···

ScenaticWall 100···

SncWall 100 1E27···Decorative wall luminaire with frosted glass shade in two colour variants with E27 lamp-holder for 1 high-voltage halogen lamp QT 32 max. 100 W or 1 LED lamp (see lamp table). Glass shade is homogeneously illuminated for decorative indirect light component. Thermally separated wall bracket of steel, silver-grey, powder-coated. No ballast, lamp operation via direct mains voltage.···25 Shade colour white.···53 Shade colour red.

SncWall 100 1TCT···Decorative wall luminaire with frosted glass shade in two colour variants for 1 compact fluorescent lamp 26 W. Glass shade is homo-geneously illuminated for decorative indirect light component. Thermally separated wall bracket of steel, silver-grey, powder-coated, with integral electronic control gear.···25 Shade colour white.···53 Shade colour red.

6 d a IP20

57

250

170

148

195 100

SncWall 1 00···

Lamp data ································193


Shade WSncWall 100 1E27 max100 25 59 587 10 White QT-E27, 100 W E27 2.3SncWall 100 1E27 max100 53 59 588 10 Red QT-E27, 100 W E27 2.3SncWall 100 1TCT26 E 25 59 589 04 White 1 x TC-TEL, 26 W G24-q3 3.0SncWall 100 1TCT26 E 53 59 590 04 Red 1 x TC-TEL, 26 W G24-q3 3.0

58

3-circuit tracks

3-circuit tracksAvailable in two colour variants and four construction lengths as a basis for variable arrangements and tool-free mounting of sur-face-mounted spotlights with integral 3-circuit track adapters. Consisting of extruded alu -minium profile with integral copper conductors for three separate circuits, one version for surface-mounting and suspended mounting in addition to one version for ceiling recess mounting. The accessories such as feed units, connections etc. and planning aids are listed on page 60.

VersionsTrack AB··· 3-circuit track for surface mounting and suspended mount ing.Track EB··· 3-circuit track for ceiling recessed mounting.

Construction lengths···3-PH 1··· Length 1000 mm.···3-PH 2··· Length 2000 mm.···3-PH 3··· Length 3000 mm.···3-PH 4··· Length 4000 mm.

Colours···01 White.···02 Silver.

6 5

Track AB 3-PH··· Track EB 3-PH···

59

32

36

41

59

Designation TOC Description Colour L x B x H

Track, surface-mounted mmTrack AB 3-PH 1,0M 01 46 341 00 3~circuit track surface-mounted 1 m White 1000 x 36 x 32Track AB 3-PH 2,0M 01 46 335 00 3~circuit track surface-mounted 2 m White 2000 x 36 x 32Track AB 3-PH 3,0M 01 46 329 00 3~circuit track surface-mounted 3 m White 3000 x 36 x 32Track AB 3-PH 4,0M 01 46 323 00 3~circuit track surface-mounted 4 m White 4000 x 36 x 32Track AB 3-PH 2,0M 02 46 336 00 3~circuit track surface-mounted 2 m Silver 2000 x 36 x 32Track AB 3-PH 3,0M 02 46 330 00 3~circuit track surface-mounted 3 m Silver 3000 x 36 x 32Track AB 3-PH 4,0M 02 46 324 00 3~circuit track surface-mounted 4 m Silver 4000 x 36 x 32

Track, recessedTrack EB 3-PH 2,0M 01 46 337 00 3~circuit track recessed 2 m White 2000 x 59 x 41Track EB 3-PH 3,0M 01 46 331 00 3~circuit track recessed 3 m White 3000 x 59 x 41Track EB 3-PH 4,0M 01 46 325 00 3~circuit track recessed 4 m White 4000 x 59 x 41

Track AB··· Track EB···

60

68

44

36

32

105

44

44

105

32

3644

172

44

105

4436

32

44

172

44

172

4436

32

44

68

4480-120

32

36

Planning aid and system components

Earthing conductor left / right

Earthing conductor left inner / left outer /right inner / right outer

Earthing conductor inner / outer

Position of the earthing conductor is defined according to the direction of the track opening.

Live Feed AB 3-PH···

Coupler Wkl AB 3-PH···

Connector X AB 3-PH···

Connector Flex AB 3-PH···

Connector T AB 3-PH···

Live Feed AB 3-PH···In-line feed AB

3-PH between··· End cap AB 3-PH··· Coupler linear AB 3-PH···

Connector T AB 3-PH··· Connector Flex AB 3-PH··· Pendant suspension 3-PH··· Point outlet EB 3-PH···

61

1000

3 kg

333 333 333

3 kg 3 kg 3 kg

500

5 kg

333 333 333

500

5 kg 5 kg 5 kg

Designation TOC Description L x W x H

Live feed, surface-mounted mmLive feed AB 3-PH earth left 01 46 312 00 3 circuit feeding, front-side, surface-mounted, earthed conductor left 68 x 36 x 32Live feed AB 3-PH earth right 01 46 306 00 3 circuit feeding, front-side, surface-mounted, earthed conductor right 68 x 36 x 32In-line feed AB 3-PH reversible 01 46 368 00 3 circuit intermediary feeding, surface-mounted 172 x 36 x 32End cap AB 3-PH 01 46 356 00 3 circuit end cap for front-side cover, surface-mounted –Live feed AB 3-PH earth left 02 46 342 00 3 circuit feeding, front-side, surface-mounted, earthed conductor left 68 x 36 x 32Live feed AB 3-PH earth right 02 46 314 00 3 circuit feeding, front-side, surface-mounted, earthed conductor right 68 x 36 x 32In-line feed AB 3-PH reversible 02 46 308 00 3 circuit intermediary feeding, surface-mounted 172 x 36 x 32End cap AB 3-PH 02 46 318 00 3 circuit end cap for front-side cover, surface-mounted –

Live feed, recessedLive feed EB 3-PH earth left 01 46 319 00 3 circuit feeding, front-side, recessed, earthed conductor left 79 x 59 x 32Live feed EB 3-PH earth right 01 46 374 00 3 circuit feeding, front-side, recessed, earthed conductor right 79 x 59 x 32In-line feed EB 3-PH reversible 01 46 354 00 3 circuit intermediary feeding, recessed 172 x 59 x 32End cap EB 3-PH 01 46 355 00 3 circuit end cap for front-side cover, recessed –

Coupler, surface-mountedStraight coupler AB 3-PH 01 46 365 00 3 circuit straight coupling, surface-mounted –Angled coupler AB 3-PH outside earth 01 46 301 00 3 circuit angle coupling 90° earthed conductor ext., surface-mounted 105 x 105Angled coupler AB 3-PH inside earth 01 46 302 00 3 circuit angle coupling 90° earthed conductor int., surface-mounted 105 x 105Connector T AB 3-PH earth right 01 46 313 00 T connector earthed conductor right, surface-mounted 172 x 105Connector T AB 3-PH earth left 01 46 307 00 T connector earthed conductor left, surface-mounted 172 x 105Connector Flex AB 3-PH 01 46 364 00 3 circuit flexible connector 3 circuit, surface-mounted –Connector X AB 3-PH 01 46 369 00 X connector, surface-mounted 172 x 172Straight coupler AB 3-PH 02 46 309 00 3 circuit straight coupling, surface-mounted 58 x 25Angled coupler AB 3-PH outside earth 02 46 303 00 3 circuit angle coupling 90° earthed conductor ext., surface-mounted 105 x 105Angled coupler AB 3-PH inside earth 02 46 350 00 3 circuit angle coupling 90° earthed conductor int., surface-mounted 105 x 105Connector T AB 3-PH earth right 02 46 304 00 T connector earthed conductor right, surface-mounted 172 x 105Connector T AB 3-PH earth left 02 46 305 00 T connector earthed conductor left, surface-mounted 172 x 105Connector X AB 3-PH 02 46 348 00 X connector, surface-mounted 172 x 172

Coupler, recessedStraight coupler EB 3-PH 01 46 349 00 3 circuit straight coupling with cover plate, recessed –Angled coupler EB 3-PH outside earth 01 46 299 00 3 circuit angle coupling 90° earthed conductor ext., recessed 115 x 115Angled coupler EB 3-PH inside earth 01 46 300 00 3 circuit angle coupling 90° earthed conductor int., recessed 115 x 115Connector T EB 3-PH earth right 01 46 310 00 T connector earthed conductor right, recessed 172 x 115Connector T EB 3-PH earth left 01 46 311 00 T connector earthed conductor left, recessed 172 x 115Connector X EB 3-PH 01 46 351 00 X connector, recessed 172 x 172

Mounting accessoriesFixing AB 3-PH 01 46 361 00 Fastening clip for ceilings and T rails 50 x 36 x 19Suspension fixing AB 3-PH 01 46 370 00 Fastening clip for wire and pendant installation (13 mm) 50 x 36 x 19Suspension connector AB 3-PH 01 46 371 00 Joint connector for wire and pendant installation (13 mm) 100 x 36 x 19Fixing AB 3-PH 02 46 362 00 Fastening clip for ceilings and T rails 50 x 36 x 19Suspension fixing AB 3-PH 02 46 372 00 Fastening clip for wire and pendant installation (13 mm) 50 x 36 x 19Suspension connector AB 3-PH 02 46 373 00 Joint connector for wire and pendant installation (13 mm) 100 x 36 x 19Rod suspension 3-PH 01 46 376 00 Rod suspension with 13 mm rod for 3 circuit fastening points 1200Wire suspension 3-PH 02 46 375 00 Wire suspension for 3 circuit fastening points 1500

Point outletsPoint outlet AB 3-PH 01 46 366 00 3 circuit point outlet, surface-mounted ¶ 125 mmPoint outlet EB 3-PH 01 46 367 00 3 circuit point outlet, recessed ¶ 125 mmPoint outlet AB 3-PH 02 46 315 00 3 circuit point outlet, surface-mounted ¶ 125 mmPoint outlet EB 3-PH 02 46 317 00 3 circuit point outlet, recessed ¶ 125 mm

···01 White ···02 Silver

The schematic diagrams show the load capability of the track with spotlights or other loads according to the number of fastening or suspension points. The inherent weight has been considered.

62

Snc ZBL-RI··· Snc ZRA-WA··· Snc ZBL-AM···

Snc ZCS··· SncZF-UV··· Snc ZFC···

Accessories

Honeycombmade of sheet steel, black texture powder-coated, similar to RAL 9005. Tool-free instal-lation. For homogeneous glare reduction with flat viewing angles.

Baffle r ingmade of sheet steel, black texture powder-coated, similar to RAL 9005. Tool-free instal-lation. Reduction of spotlight luminance in defined beam areas via concentric rings.

Lamp s hieldmade of sheet steel, black texture powder-coated, similar to RAL 9005. Tool-free instal-lation. Asymmetrical reduction of light emission s urface.

Colour discsmade of glass, for use in spotlights, can be attached without tools.

UV blocking filtermade of glass, for use in spotlights, can be attached without tools.

Designation ¶ m m TOCSncZRA-WA 130 130 59 717 00SncZRA-WA 150 150 59 718 00

Designation ¶ mm TOCSncZF-UV 111 111 59 699 00SncZF-UV 130 130 59 700 00

Designation ¶ mm TOCSncZBL-RI 130 130 59 719 00SncZBL-RI 150 150 59 720 00

Designation ¶ mm TOCSncZBL-AM 130 130 59 721 00SncZBL-AM 150 150 59 722 00

Designation Colour ¶ mm TOCSncZCS 111 rd red 111 59 709 00SncZCS 130 rd red 130 59 710 00SncZCS 111 gn green 111 59 711 00SncZCS 130 gn green 130 59 712 00SncZCS 111 bl blue 111 59 713 00SncZCS 130 bl blue 130 59 714 00SncZCS 111 ye yellow 111 59 715 00SncZCS 130 ye yellow 130 59 716 00

Colour filtersfor use in spotlights for presentation of food-stuffs, attached without tools.

···ZFC-VE··· For use with fruit and vegetables.···ZFC-BA··· For use with cheese and bakery goods.

Designation ¶ mm TOCSncZFC-VE 111 111 59 701 00SncZFC-VE 130 130 59 702 00

SncZFC-BA 111 111 59 703 00SncZFC-BA 130 130 59 704 00

63

SncZBR-G···

Reflector, goldof aluminium, facetted, with spot and medium flood distribution characteristics.

Designation ¶ m m TOCSncZBR-G 105 SP 105 59 705 00SncZBR-G 105 MF 105 59 706 00SncZBR-G 125 SP 125 59 707 00SncZBR-G 125 MF 125 59 708 00

SncP

oint

300

···

SncP

oint

400

···

SncP

oint

5···

SncF

lex

200·

··

SncF

lex

300·

··

SncF

lex

400·

··

SncF

lex

500·

··

Filters TOCSncZF-UV 111 59 699 00 • • • • • • SncZF-UV 130 59 700 00 •SncZFC-VE 111 59 701 00 • • • • • •SncZFC-VE 130 59 702 00 •SncZFC-BA 111 59 703 00 • • • • • •SncZFC-BA 130 59 704 00 •Colour discsSncZCS 111 rd 59 709 00 • • • • • •SncZCS 130 rd 59 710 00 •SncZCS 111 gn 59 711 00 • • • • • •SncZCS 130 gn 59 712 00 •SncZCS 111 bl 59 713 00 • • • • • •SncZCS 130 bl 59 714 00 •SncZCS 111 ye 59 715 00 • • • • • •SncZCS 130 ye 59 716 00 •Louvres/shieldsSncZRA-WA 130 59 717 00 • • • • •SncZRA-WA 150 59 718 00 •SncZBL-RI 130 59 719 00 • • • • •SncZBL-RI 150 59 720 00 •SncZBL-AM 130 59 721 00 • • • • •SncZBL-AM 150 59 722 00 •ReflectorSncZBR-G 105 SP 59 705 00 • • • • • •SncZBR-G 105 MF 59 706 00 • • • • • •SncZBR-G 125 SP 59 707 00 •SncZBR-G 125 MF 59 708 00 •

SSSSuuurrrfffaaaaccceee---mmmmoooouuuuunnnnntttttteeeeeeddddd,,,, ssssssuuuuuusssssssppppeeeeennnnnnnddddddeeeeeddd aaannndddd ffrreeeeee---ssssttttaaannddiinngg luminaires

66

Neximo LED

67

A unique character with the essence of current trends.Whether for general or workplace lighting, TRILUX Neximo wins over with an individual design, a new form of light emission and high efficiency thanks to daylight control and presence detection.

A unique design: an organic light sculpture in an extremely flat construction with sophisticated matt-structured surface.Up-to-date: concept with modern pattern structure for a sophisticated office ambience, developed by Design Affairs and awarded the red dot.Unique light perception: the luminous structure between the lenses creates soft transitions and a pleasant, harmonious light perception.Photometrically variable: photometrically adapted versions respectively offer optimal light distribution for workplace and/or general lighting, and if desired with attractive continuous-line connectors.Conveniently efficient: version with sensor for daylight and presence control.

Line arrangementThe attractive connector elements transform the appealing single luminaires into a homoge-neous line. The continuous line represents perfect lighting and upgrades conference tables, reception desks and group workstations.

LCL-Technology (Low Contrast Light technology)A pleasant perception of light due to TRILUX Low Contrast Light technology: illumination of the transitions reduces the sharp borders between bright LED light sources and dark surfaces.

68

Neximo H2···01

ApplicationFor innovative, prestigious general lighting in offices, meeting rooms, lounge areas, show-rooms and public areas.···H1··· specifically for task-area lighting of single or double office workstations.

Optical systemDirect/indirect distribution. 58 high power LED’s, 36 with indirect distribution, 22 with direct distribution, integrated in separate high performance precision lenses. LED with constant colour stability and a colour rendering index of Ra > 80 over the complete service life. Neutral white light colour (···nw···), colour temperature 4000 K, connected load 112 W. Suitable for VDU workstations according to EN 12464-1 via limited luminance L ≤ 1000 cd/m² for distribution characteristics above 65° all-round.

LCL-Technology (Low Contrast Light technology)A pleasant perception of light with TRILUX Low Contrast Light technology: illumination of the transitions reduces the sharp borders between bright LED light sources and dark surfaces.···H1··· Total luminous flux 6200 lm.···H2··· Total luminous flux 6300 lm.

Luminaire bodyConsisting of two extruded aluminium profiles, very slender appearance due to cross-section tapering upwards, finely textured powder-coated surface, construction height 28 mm. Die-cast end caps for homogenous end appear-ance. Includes 2-point wire suspension in Y-form and transparent cable for suspension lengths to 1500 mm.···01 White.···I2 Black.

Electrical versionElectronic mains power integrated within luminaire.···ETDD With digitally dimmable electronic transformer (DALI).···ETDD+ActiM With digitally dimmable electronic transformer (DALI) and integrated ActiLume control device and sensor unit for daylight-dependent control and presence detection.

Neximo LEDExclusive suspended LED luminaire

Neximo H1···

Neximo H2···

6 5 4 d a IP20 0.5 joules 650 °C

69

80

1440

28

160

60

14551600

140

Neximo···

Neximo H2···I2

Designation TOC Electrical Lamps/ Power ≈kgversion Luminous flux/ consumption···ETDD Light colour

White Neximo H1 LED 6200 nw···01 59 009··· ···51 LED/6200 lm/nw 112 W 6.5Neximo H1 LED 6200 nw···+ActiM 01 59 011··· ···51 LED/6200 lm/nw 112 W 6.5Neximo H2 LED 6300 nw···01 59 013··· ···51 LED/6300 lm/nw 112 W 6.5Neximo H2 LED 6300 nw ···+ActiM 01 59 015··· ···51 LED/6300 lm/nw 112 W 6.5Black Neximo H1 LED 6200 nw···I2 59 010··· ···51 LED/6200 lm/nw 112 W 6.5Neximo H1 LED 6200 nw···+ActiM I2 59 012··· ···51 LED/6200 lm/nw 112 W 6.5Neximo H2 LED 6300 nw···I2 59 014··· ···51 LED/6300 lm/nw 112 W 6.5Neximo H2 LED 6300 nw···+ActiM I2 59 016··· ···51 LED/6300 lm/nw 112 W 6.5

70

Efficient and elegant in every sense of the word.TRILUX Enspiro with a construction height of only 18 mm achieves maximum light output grade, and was presented with the iF product design award 2010 for its elegant and minimalist design.

Fascinating: minimalist light emission below.Upgrading the room: discreet light in elegant form. Adaptable: can be harmoniously integrated into any interior design.Modern: uniquely flat, purist design.Energy-saving: high lumen yield with optimised power consumption, additional savings with ActiLume light management system.

Enspiro LED

71

New possibilities with LED The distinctly flat construction height of only 18 mm would not be possible with conventional photometrics. This is where Enspiro really takes advantage of its strengths. A reduced form, minimalist light emission and a unique design. And all that with a luminous flux of almost 6000 lumen and power consumption of only 102 watt.

Innovative light emission The precise, glare-free light control of the compact optical system avoids unnecessary light spill. Two outer segments each with 6 direct distribution LEDs guide the light asymmetrically onto the illuminated area. The wide-angle light distribution indirect output of Enspiro with 36 LEDs ensures generous room illumination. The result: fascinating office lighting in accordance with standards.

72

ApplicationFor innovative and prestigious office lighting, especially the workzone-oriented lighting of single or double workstations in offices, for meeting rooms, lounge areas, showrooms and public areas.

Optical systemDirect/indirect distribution. 48 high power LEDs, integrated in separate mini LED louvres with UXP technology®. Eight LED segments doubling as square cooling units integrated into the luminaire body ensure optimal thermal management, whereby six have indirect, symmetrical light distribution and the remaining 2 on the outside have direct, asymmetrical distribution. LED with constant colour stability and a colour render-ing index of Ra > 80 over the complete service life. Suitable for VDU workstations according to EN 12464-1 via limited luminance L ≤ 1000 cd/m² for distribution characteristics above 65° all-round.···nw··· Neutral white light colour, colour tem-perature 4000 K.

Luminaire bodyVery flat aluminium section with colour high-lighted, flush end caps of anodised alumini-um. Visible construction height 18 mm. With integral plastic cover made of poly carbonate for protection of the indirect optics against soiling. Includes 2-point wire suspension in Y-form, transparent cable for suspension lengths to 1500 mm and square ceiling rose, white.···01 White.···I2 Black.

Electrical versionElectronic power supply integrated within luminaire.···ET With electronic transformer.···ETDD With digitally dimmable electronic transformer (DALI).···ETDD+ActiM With digitally dimmable electronic transformer (DALI) and integrated ActiLume control device and sensor unit for daylight-dependent control and presence detection.

Enspiro LEDExclusive suspended LED luminaire

Enspiro H LED···

6 5 4 d a IP20 0.2 joules 650 °C

Enspiro H LED···01

73

1520

160

1214

4 4

18

E

Enspiro H LED···

Designation TOC Electrical Lamps/ Power ≈kgversion Luminous flux/ consumption···ET ···ETDD Light colour

White Enspiro H LED 6000 nw···01 58 985··· ···40 ···51 LED/6000 lm/nw 102 W 6.8Enspiro H LED 6000 nw···+ActiM 01 58 988··· ···51 LED/6000 lm/nw 102 W 6.8Black Enspiro H LED 6000 nw···I2 58 986··· ···40 ···51 LED/6000 lm/nw 102 W 6.8Enspiro H LED 6000 nw···+ActiM I2 58 989··· ···51 LED/6000 lm/nw 102 W 6.8

Enspiro H LED···I2

74

Solvan Black

75

A reduced form with an elegant room effect. The classic black appearance of Solvan Black and the haptic and visual quality of the end caps create a distinct presence in the room without being obtrusive. Thanks to the classically pure construction form, areas of application for Solvan Black are without limits.

Elegant: design-oriented, black luminaire body with colour accentuating end caps of anodised aluminium.Diverse: various optical systems for optimal illumination of both horizontal and vertical surfaces, also suitable for continuous lines. Award-winning: awarded the red dot in 2009.

Complete: supplied ready for installation with 1-point wire suspension, transparent cable and high quality end caps.

76

C0- C180

SolvanB H1 OTA···

ApplicationVery slender decorative suspended luminaire with filigree cubic form, end caps colour differentiated from luminaire body. For visual and sensory lighting in conference and office areas, corridors, foyers, and exhibition and sales areas.

Optical systemDirect/indirect distribution. Opal cover, flush mounted to luminaire housing.···OTA··· with finely textured surface made of PLEXIGLAS.

Luminaire bodyFiligree, elegant cubic form, end caps colour differentiated from luminaire body. Sheet steel luminaire body, matt black, Noir 200 colour code (···I2···), finely texture-coated. Aluminium end caps, matt anodised. Pre- installed transparent cable for suspension lengths to 2000 mm, pre-installed wire suspension. Design ceiling rose must be ordered separately.


SolvanBDecorative suspended luminaire with cover made of PLEXIGLAS (OTA)

6 5 4 d a IP20 0.2 joules 650 °C

SolvanB H1 OTA135/49/80UTE: 0.40 E + 0.27 TDIN 5040: C43CIBSE: BZ 4NBN L 14-002:BZ 5/1/BZ 4

77

70

B

20

E

1176/28W/54W1476/35W/49W/80W

62

281120/28W/54W

1420/35W/49W/80W 28

20

SolvanB···H···

Lamp data ································193

Designation TOC Electrical Lamps B ≈kg version ···E ···EDD W mm SolvanB H1 OTA 128/54···I2 58 419··· ···04 ···07 1 x 28/54 85 2.7SolvanB H1 OTA 135/49/80···I2 58 420··· ···04 ···07 1 x 35/49/80 85 3.3

Accessories TOC DescriptionCeiling roseZAE/01 46 917 00 Square, whiteZAE/03 46 918 00 Square, metallic greyZAA/01 46 017 00 Round, whiteZAA/03 46 018 00 Round, silver-grey

78

SolvanB H2 UXP-AD···SolvanB H1 UXP-H···

C0- C180

C0- C180

ApplicationSlimline suspended luminaire with filigree cubic form for the visual and sensory lighting of conference and office areas, corridors, foyers, exhibition and sales areas.···UXP-AD··· Specifically for the task-area lighting of single or double office workstations with computer screens.

Optical systemsDirect/indirect distribution. Ultra-low cross- section louvre with UXP-Technology®, reflect-ance value 98%. Suitable for VDU workstations according to EN 12464-1 via reduced luminance L ≤ 1000 cd/m² for distribution characteristics above 65° all-round.···UXP-H··· Highly-specular, light spill ≤ 3 %.···UXP-S··· Semi-specular.···UXP-AD··· Special workzone louvre with UXP-Technology®, highly-specular, light spill ≤ 3 %. Integral light-focus lamellae achieve high-contrast, glare-free lighting over the workzone.

Luminaire bodyFiligree, elegant cubic form, end caps colour differentiated from luminaire body. Sheet steel luminaire body, matt black, Noir 200 colour code (···I2···), finely texture-coated. Aluminium end caps, matt anodised. Pre-installed trans-parent cable for suspension lengths to 2000 mm, pre-installed wire suspension. Design ceiling rose must be ordered separately.

Electrical version···28/54···, ···35/49··· and ···35/49/80··· with multi-lamp technology for operation of T5 lamps with varying wattages.···E With electronic multi-lamp control gear.···EDD With digitally dimmable electronic multi-lamp control gear (DALI).···EDD+ActiM With digitally dimmable, electronic multi-lamp control gear (DALI) and integral ActiLume control device and sensor unit for daylight-dependent control and presence detection.

SolvanBSuspended luminaires with ultra-low cross-section louvre with UXP-Technology®

or with UXP-AD task-area louvre

6 5 4 d a IP20 0.2 joules 850 °C

SolvanB H1-L UXP-H 149UTE: 0.52 B + 0.28 TDIN 5040: B63CIBSE: BZ 1NBN L 14-002: BZ 1

SolvanB H2 UXP-AD 249 UTE: 0.18 D + 0.54 TDIN 5040: D23CIBSE: BZ 3/1.25/BZ 2NBN L 14-002:BZ 4/1/BZ 3

79

70

B

20

E

1176/28W/54W1476/35W/49W/80W

62

281120/28W/54W

1420/35W/49W/80W 28

20

SolvanB···H···

Lamp data ································193

Designation TOC Electrical Lamps B ≈kg version ···E ···EDD W mm SolvanB H1 UXP-H 128/54···I2 58 421··· ···04 ···07 1 x 28/54 85 2.0SolvanB H1 UXP-H 135/49/80···I2 58 422··· ···04 ···07 1 x 35/49/80 85 2.4SolvanB H1 UXP-S 128/54···I2 58 423··· ···04 ···07 1 x 28/54 85 2.0SolvanB H1 UXP-S 135/49/80···I2 58 424··· ···04 ···07 1 x 35/49/80 85 2.4SolvanB H2 UXP-AD 228/54···I2 58 425··· ···04 ···07 2 x 28/54 101 2.5SolvanB H2 UXP-AD 228/54···+ActiM I2 58 426··· ···07 2 x 28/54 101 2.5SolvanB H2 UXP-AD 235/49···I2 58 427··· ···04 2 x 35/49 101 2.9SolvanB H2 UXP-AD 235/49/80···I2 58 428··· ···07 2 x 35/49/80 101 2.9SolvanB H2 UXP-AD 235/49/80···+ActiM I2 58 429··· ···07 2 x 35/49/80 101 2.9SolvanB H2 UXP-AD 280···I2 58 430··· ···04 2 x 80 101 2.9

Accessories TOC DescriptionCeiling rose ZAE/01 46 917 00 Square, whiteZAE/03 46 918 00 Square, metallic greyZAA/01 46 017 00 Round, whiteZAA/03 46 018 00 Round, silver-grey

80

Classic, with versatile applications.TRILUX Valuco immediately assumes the role of a classic and versatile design luminaire within the TRILUX ranges. Its concise, clear design language in the form of a flat, white diffuser luminaire body with end caps solves various application tasks without appearing arbitrary.

Valuco und Valuco Active

81

Valuco ActiveSunlight on a cloudless day has a pleasant effect, promotes powers of concentration and ensures optimal visual conditions. We have taken that as our role model. Valuco Active combines two lighting components to achieve daylight-similar lighting: Directed light with lower colour temperature corresponds to the direct ingress of sunlight, and diffuse stray light with a high blue compo-nent represents diffuse daytime sky.

Setting accentsThe Valuco free-standing luminaire is predes-tined for accenting or supplementing existing Valuco lighting solutions. As a special feature, the free-standing luminaire version has an integral touch dimming function for direct control.

The family philosophyWhether as a ceiling, wall mounted or free-standing luminaire, as a continuous line, or as a suspended, symmetrical appearance twin diffuser variation – TRILUX Valuco is always perceived with a highly characteristic retro flavour.But only the exterior has the appearance of being unobtrusively nostalgic. The luminaire conceals advanced technology within.

Valuco Active – Colour-dynamic light for more dynamism in their heads.TRILUX Valuco Active has an activating effect. Because upon demand it creates cooler light for work requiring concentration imitating the example of the naturally blue morning sky.

Activating: combines lighting for concentrated work with activating, general lighting.Striking: an uncomplicated form with cubic elements.Highly-specular: an inner filigree specular louvre featuring UXP-Technology® for maximum lighting quality.Independent: an integral light management system (luminaires with LGC controller) for simple installation of the lighting system.Clean: an all-round sealed luminaire reliably protects against external influences; is easy to clean and prevents soiling of the louvre.

82

C0- C180

Valuco S 239··· Valuco S 254···

6 5 4 d a

Valuco S 228/54UTE: 0.36 J + 0.36 T DIN 5040: C11 CIBSE: BZ 10 NBN L 14-002: BZ 10

IP40 1 joule 650 °C ···PC··· 850 °C

ApplicationDecorative supplementary lighting, especially for hotels, wellness, health, rehabilitation centres, sanatoriums and care homes.

Optical systemTwo matt opal PLEXIGLAS diffusers in vertical configuration, with finely textured, matt decorative surfaces, on a recessed black sub-structure.···PC··· Diffuser made of polycarbonate.

Luminaire bodyBase of steel, rectangular stand section and aluminium frame construction, upper end cap made of plastic, all components black.

Electrical connectionWith ZALW··· connection cable, 2500 mm long, coiled in baseplate to save space.

Electrical versionWith dimmable electronic control gear and flush mounted proximity switch in end cap for switching and dimming of luminaire.

Valuco S···Free-standing luminaires with decorative black and white design, with matt opal twin diffuser

83

Valuco S 254···Valuco S 239···

1200/39W

12

320

312

200

68

96

171

220

320

220

1500/54W

12

320

312

200

68

96

171

220

320

220

Lamp data ································193

Designation TOC Electrical Lamps Height ≈kg version ···ED W mm Valuco S 239··· 57 150··· ···05 2 x 39 1200 12.0Valuco S 254··· 57 152··· ···05 2 x 54 1500 13.0Valuco S 239···PC 57 151··· ···05 2 x 39 1200 12.0Valuco S 254···PC 57 153··· ···05 2 x 54 1500 13.0

Accessories TOC DescriptionConnection cable*ZALW/2500 EU 47 501 00 Black, length 2500 mm, for Germany

and rest of EuropeZALW/2500 CH 47 502 00 Black, length 2500 mm, for SwitzerlandZALW/2500 GB 47 503 00 Black, length 2500 mm, for Great BritainZALW/2500 IT 47 504 00 Black, length 2500 mm, for Italy* ZALW/2500 EU included in scope of supply.

Please order ZALW/···CH, ···GB or ···IT separately.

84

ValucoAct D-UXP···

C0- C180

6 5 4 d a IP40 1 joule 650 °C

ApplicationColour-dynamic light for activating light-ing in offices, sales areas, schools, recrea-tion rooms, showrooms, public areas and corridors as well as in the areas of wellness, health, rehabilitation centres, sanatoriums and care homes.

Optical systemOptimised for the combination of two separate light outputs for T5 fluorescent lamps with differing light colours. The diffuser covering the luminaire body is in co-extruded PLEXIGLAS, matt opal longitudi-nally, for diffuse light distribution. Diffuser is transparent in the centre with inner, ultra-low cross-section louvre for direct, narrow light distribution. Louvre with UXP-Technology®, highly-specular with highly reflective surface, total reflection 98 %. Suitable for VDU work-stations according to EN 12464-1 via limited luminance L ≤ 1000 cd/m² for distribution characteristics above 65° all-round.

Luminaire bodySheet steel, black. The protruding plastic end caps give the characteristic appearance of a translucent body.···01 White.

Electrical versionVersions ···35/49 with multi-lamp technology.···EDD With digitally dimmable electronic control gear (DALI).···EDD+LGC With digitally dimmable electronic control gear (DALI) and integral LIGHTGATE control device for daylight-dependent control and presence detection.

Valuco ActiveSurface-mounted luminaires for colour-dynamic light

ValucoAct D-UXP 349UTE: 0.50 D + 0.07 T DIN 5040: B41 CIBSE: BZ 3/1.5/BZ 4 NBN L 14-002: BZ 4

85

ValucoAct D-UXP···01

76

200 30

12501495

30 3035

76

200 30

12501495

30 4135

260

25

25

···EDD···

···EDD+LGC···

76

200 30

9501195

30 3035

···EDD···

···EDD+LGC···

76

200 30

9501195

30 4535

365

ValucoAct D-UXP/335···ValucoAct D-UXP/328···

Accessories ······························· 89Light management···················186Lamp data ································193

Designation TOC Electrical Lamps ≈kg version ···EDD W ValucoAct D-UXP/328··· 58 923··· ···07 3 x 28 5.3 ValucoAct D-UXP/335/49··· 58 921··· ···07 3 x 35/49 6.1 ValucoAct D-UXP/328···01 59 747··· ···07 3 x 28 5.3 ValucoAct D-UXP/335/49···01 59 745··· ···07 3 x 35/49 6.1 Master luminaires with integral LightGate light management controller ValucoAct D-UXP/328···+LGC 58 922··· ···07 3 x 28 5.3 ValucoAct D-UXP/335/49···+LGC 58 920··· ···07 3 x 35/49 6.1 ValucoAct D-UXP/328···+LGC 01 59 746··· ···07 3 x 28 5.3 ValucoAct D-UXP/335/49···+LGC 01 59 744··· ···07 3 x 35/49 6.1

86

Valuco D 2···

Valuco D···

C0- C180

Valuco D···Surface-mounted luminaires with decorative black and white design, with matt opal diffuser or diffuser/louvre combination cover

6 5 4 d a

ApplicationOffices, sales areas, schools, recreation rooms, showrooms, public areas and corridors as well as in the areas of wellness, health, rehabilitation centres, sanatoriums and care homes.···UXP··· Especially for workstations with computer screens.

Also suitable for suspended mounting, vertical and horizontal wall mounting.

Optical systemMatt opal PLEXIGLAS diffuser surrounding luminaire body with finely textured, matt decorative surface. Inner reflector made of sheet steel, highly reflective, coated white.···UXP··· Diffuser in co-extruded version made of PLEXIGLAS, transparent in the centre, matt opal longitudinally. Inner ultra-low cross-section louvre with UXP-Technology®, highly-specular with highly reflective surface, total reflection 98 %. Suitable for VDU workstations according to EN 12464-1 via limited luminance L ≤ 1000 cd/m² for distribution characteristics above 65° all-round.···PC··· Diffuser made of polycarbonate.

Luminaire bodySheet steel, black. The protruding plastic end caps give the characteristic appearance of a translucent body.

Electrical version···28/54··· and ···35/49··· versions with multi-lamp technology for operation of T5 lamps with varying wattages.···E With electronic control gear.···EDD With digitally dimmable electronic control gear (DALI).

IP40 1 joule 650 °C ···PC··· 850 °C ···UXP···

Valuco D 235/49UTE: 0.56 G + 0.09 TDIN 5040: B31CIBSE: BZ 5NBN L 14-002: BZ 5

87

Valuco D 1···, Valuco D 3···, Valuco D-UXP 1···

Valuco D-UXP···

Accessories ······························· 89Lamp data ································193

Designation TOC Electrical version Lamps L ≈kg ···E ···EDD W mm Valuco D 128/54··· 56 808··· ···04 ···07 1 x 28/54 1195 4.5Valuco D 128/54···PC 56 809··· ···04 ···07 1 x 28/54 1195 4.5Valuco D 135/49/80··· 56 810··· ···04 ···07 1 x 35/49/80 1495 5.2Valuco D 135/49/80···PC 56 811··· ···04 ···07 1 x 35/49/80 1495 5.2Valuco D 214··· 56 608··· ···04 ···07 2 x 14 595 3.3Valuco D 214···PC 56 607··· ···04 ···07 2 x 14 595 3.3Valuco D 224··· 56 649··· ···04 2 x 24 595 3.3Valuco D 224···PC 56 650··· ···04 2 x 24 595 3.3Valuco D 228··· 56 609··· ···04 ···07 2 x 28 1195 3.8Valuco D 228···PC 56 606··· ···04 ···07 2 x 28 1195 3.8Valuco D 254··· 56 651··· ···04 2 x 54 1195 3.8Valuco D 254···PC 56 652··· ···04 2 x 54 1195 3.8Valuco D 235/49··· 56 610··· ···04 ···07 2 x 35/49 1495 4.4Valuco D 235/49···PC 56 605··· ···04 ···07 2 x 35/49 1495 4.4Valuco D 328··· 56 611··· ···04 ···07 3 x 28 1195 4.5Valuco D 328···PC 56 604··· ···04 ···07 3 x 28 1195 4.5Valuco D 335/49··· 56 612··· ···04 ···07 3 x 35/49 1495 5.2Valuco D 335/49···PC 56 603··· ···04 ···07 3 x 35/49 1495 5.2 Valuco D-UXP/128/54··· 56 613··· ···04 ···07 1 x 28/54 1195 4.5Valuco D-UXP/135/49/80··· 56 614··· ···04 ···07 1 x 35/49/80 1495 5.2

88

C0- C180

Valuco H···

Valuco H··· + ···ZST···

Accessories ······························· 89Lamp data ································193Valuco H···

Suspended luminaires with decorative black and white design, with matt opal diffusers

6 5 4 d a

Designation* TOC Electrical Lamps L ≈kg version ···E ···EDD W mm Valuco H 228/54··· 56 641··· ···04 ···07 2 x 28/54 1200 4.6Valuco H 228/54···PC 56 645··· ···04 ···07 2 x 28/54 1200 4.6Valuco H 235/49··· 56 653··· ···04 2 x 35/49 1500 6.3Valuco H 235/49···PC 56 654··· ···04 2 x 35/49 1500 6.3Valuco H 280··· 56 655··· ···04 2 x 80 1500 6.3Valuco H 280···PC 56 656··· ···04 2 x 80 1500 6.3Valuco H 235/49/80··· 56 642··· ···07 2 x 35/49/80 1500 6.3Valuco H 235/49/80···PC 56 646··· ···07 2 x 35/49/80 1500 6.3 Valuco H 428··· 56 643··· ···04 ···07 4 x 28 1200 5.0Valuco H 428···PC 56 647··· ···04 ···07 4 x 28 1200 5.0Valuco H 435/49··· 56 644··· ···04 ···07 4 x 35/49 1500 6.7Valuco H 435/49···PC 56 648··· ···04 ···07 4 x 35/49 1500 6.7* Please order wire suspension and mains cable separately.

ApplicationOffices, sales areas, schools, recreation rooms, showrooms, public areas and corri-dors as well as in the areas of wellness, health, rehabilitation centres, sanatoriums and care homes.

Optical systemMatt opal PLEXIGLAS diffusers surrounding luminaire body, on room and ceiling side, with finely textured, matt decorative surface.···PC··· Diffuser made of polycarbonate.

Luminaire bodySheet steel, black. The protruding plastic end caps give the characteristic appearance of a translucent body. Please order wire suspen-sion and mains cable separately.

Electrical version···28/54··· and ···35/49··· versions with multi-lamp technology for operation of T5 lamps with varying wattages.···E With electronic control gear.···EDD With digitally dimmable electronic control gear (DALI).

Valuco H 235/49/80UTE: 0.37 G + 0.37 TDIN 5040: C32CIBSE: BZ 5NBN L 14-002: BZ 6/.8/BZ 5/2/BZ 6/ 2.5/BZ 5/4/BZ 6

IP40 1 joule 650 °C ···PC··· 850 °C

89

Valuco ZLK 80

Valuco ZST/···

ValucoAccessories

Wire suspension for Valuco D and H1 piece, 4-point and 2-point wire suspensions for suspension lengths up to 1000 mm and 2000 mm.

Through-wiring for Valuco D continuous line luminairesThrough-wiring in combination with Valuco ZLK continuous line couplings.

Mains cables for Valuco D, suspendedCable, transparent, for Valuco D··· surface-mounted and suspended luminaires.

Valuco H mains cablesCable, transparent, for Valuco H··· suspended luminaires.

Ceiling rose for Valuco D and H (not shown)

Designation TOC DescriptionValuco ZS/1000 56 621 00 4-point, 1000 mm (not shown)Valuco ZS/2000 56 622 00 4-point, 2000 mm (not shown)Valuco ZST/1000 56 623 00 2-point, 1000 mmValuco ZST/2000 56 624 00 2-point, 2000 mm

Designation TOC Description for luminairesValuco ZDV/315/28 56 616 00 3 x 1.5 mm2 28 W/54 WValuco ZDV/315/35 56 617 00 3 x 1.5 mm2 35 W/49 W/80 WValuco ZDV/515/28 56 619 00 5 x 1.5 mm2 28 W/54 WValuco ZDV/515/35 56 620 00 5 x 1.5 mm2 35 W/49 W/80 WValuco ZDV/315/28 UXP 58 629 00 3 x 1.5 mm2 28 W/54 W, in UXP versionValuco ZDV/315/35 UXP 58 628 00 5 x 1.5 mm2 35 W/49 W/80 W, in UXP versionValuco ZDV/515/28 UXP 58 627 00 3 x 1.5 mm2 28 W/54 W, in UXP versionValuco ZDV/515/35 UXP 58 626 00 5 x 1.5 mm2 35 W/49 W/80 W, in UXP version

Designation TOC Description Suspension length toValuco D ZZT/3075/1000 56 625 00 3 x 0.75 mm2 1000 mmValuco D ZZT/3075/2000 56 626 00 3 x 0.75 mm2 2000 mmValuco D ZZT/315/1000 56 627 00 3 x 1.5 mm2 1000 mmValuco D ZZT/315/2000 56 628 00 3 x 1.5 mm2 2000 mmValuco D ZZT/5075/1000 56 629 00 5 x 0.75 mm2 1000 mmValuco D ZZT/5075/2000 56 630 00 5 x 0.75 mm2 2000 mmValuco D ZZT/515/1000 56 631 00 5 x 1.5 mm2 1000 mmValuco D ZZT/515/2000 56 632 00 5 x 1.5 mm2 2000 mmValuco EB ZZT/3075/1000 58 631 00 3 x 0.75 mm2 1000 mm, for ZLK 180 LED EB3HValuco EB ZZT/3075/2000 58 632 00 3 x 0.75 mm2 2000 mm, for ZLK 180 LED EB3H

Designation TOC Description Suspension length toValuco H ZZT/3075/1000 56 633 00 3 x 0.75 mm2 1000 mmValuco H ZZT/3075/2000 56 634 00 3 x 0.75 mm2 2000 mmValuco H ZZT/315/1000 56 635 00 3 x 1.5 mm2 1000 mmValuco H ZZT/315/2000 56 636 00 3 x 1.5 mm2 2000 mmValuco H ZZT/5075/1000 56 637 00 5 x 0.75 mm2 1000 mmValuco H ZZT/5075/2000 56 638 00 5 x 0.75 mm2 2000 mmValuco H ZZT/515/1000 56 639 00 5 x 1.5 mm2 1000 mmValuco H ZZT/515/2000 56 640 00 5 x 1.5 mm2 2000 mm

Designation TOC DescriptionZAE/01 46 917 00 1 piece, square, white (not shown)ZAA/01 46 017 00 1 piece, round, white (not shown)

Continuous line couplingContinuous line coupling, aluminium, black, for connecting of two Valuco D··· luminaires, 1 piece. Please order wire suspension separately.

Designation TOC DescriptionValuco ZLK 80 56 752 00 1 piece, black, 80 mmValuco ZLK 180 58 633 00 1 piece, black, 180 mmValuco ZLK 180 LED EB3H 58 630 00 1 piece, black, 180 mm, individual battery system,

LED 3 W, nominal operation time 3 hours.

90

504···/505···

91

Flexibility and maximum efficiency.The established all-rounders with highly efficient silver optics achieve light output ratios of more than 90 %, and are now equipped as standard with energy-saving light management components.

Efficient: maximum efficiency via RPX/RSX louvre featuring silver optics (reflectance value > 98 %).Frugal: energy savings via daylight dependent control and presence detection.Versatile: available as surface-mounted and suspended luminaires, also for continuous lines, and with various louvre types. Highly versatile for use in offices, educational establishments and public buildings thanks to a pleasantly discreet design.

Daylight-dependent light controlThe combination of dimmable luminaires and TRILUX light management systems makes lighting highly efficient. The system combines automatic presence detection and constant light control for maximum energy saving. The operation and setting up is child’s play, using plug and play principles.

92

C0- C180

5041···

5041 RPX-L··· 5041 RSX-L···

C0- C180

Accessories ······························· 96Lamp data ································193Series 504···

Surface-mounted luminaires with RPX, RSX parabolic louvre of silver-coated aluminium

6 5 4 d a

ApplicationEducation and training, offices, sales areas, showrooms, banks and ticket halls, and espe-cially VDU workstations.

Optical systemsDirect distribution. Suitable for VDU worksta-tions according to EN 12464-1 via limited luminance L ≤ 1000 cd/m² for distribution characteristics above 65° all-round.···RPX··· Energy-efficient parabolic louvre, highly-specular, with reflection-intensifying silver surface, reflectance value > 98 %.···RSX··· Energy-efficient parabolic louvre, semi-specular, with reflection-intensifying silver surface, reflectance value > 98 %.Louvre mounting and electrical earthing via spring-tensioned clips. Louvre can be hinged downwards and unhooked on both sides without tools.

Luminaire bodySheet steel, white powder-coated. Elegant rectangular design with longitudinal, 40 mm wide trim. Luminaire body with integral cou-pling profiles for precise alignment of continu-ous lines with non-interrupted louvres. Please order end caps for individual luminaires or continuous line ends separately.

Electrical version···EDD+ActiM With digitally dimmable, elec-tronic multi-lamp control gear (DALI) and integral ActiLume control device and sensor unit for daylight-dependent control and presence detection.···EDD+LGM With digitally dimmable, elec-tronic multi-lamp control gear (DALI) and integral LIGHTGATE control device and sensor unit for daylight-dependent control and presence detection.···EDD+LGS With digitally dimmable, elec-tronic multi-lamp control gear (DALI) and integral LIGHTGATE control device and sensor unit for expansion of the daylight-dependent control and presence detection.

IP20 0.2 joules 650 °C

5041 RSX-L/49 EUTE: 0.89 B + 0.00 T DIN 5040: A50 CIBSE: BZ 2 NBN L 14-002: BZ 2

Designation TOC Electrical Lamps D D1 D2 ≈kg version ···EDD W mm RPX5041 RPX-L/35/49/80···+ActiM* 58 473··· ···07 1 x 35/49/80 1200 158 293 4.0 5041 RPX-L/35/49/80···+LGM* 58 690··· ···07 1 x 35/49/80 1200 158 293 4.0 5041 RPX-L/35/49/80···+LGS* 58 773··· ···07 1 x 35/49/80 1200 158 293 4.0 RSX5041 RSX-L/35/49/80···+ActiM* 58 692··· ···07 1 x 35/49/80 1200 158 293 4.0 5041 RSX-L/35/49/80···+LGM* 58 781··· ···07 1 x 35/49/80 1200 158 293 4.0 5041 RSX-L/35/49/80···+LGS* 58 774··· ···07 1 x 35/49/80 1200 158 293 4.0 * Please order end caps separately.

5041 RPX-L/49 EUTE: 0.89 B + 0.00 T DIN 5040: A50 CIBSE: BZ 2 NBN L 14-002: BZ 2

93

5041···

5041 RPXA-L···

C0- C180 C0- C180 C0- C180

5041 RAV-L···


Surface-mounted luminaires with RPXA, RSXA asymmetrical parabolic louvre and RAV wallwasher reflector made of silver-coated aluminium

6 5 4 d a

Designation TOC Electrical Lamps D D1 D2 ≈kg version ···E ···EDD W mm RPXA5041 RPXA-L/28/54···* 58 676··· ···04 1 x 28/54 900 158 293 3.3 5041 RPXA-L/35/49/80···* 39 174··· ···04 ···07 1 x 35/49/80 1200 158 293 3.9 RSXA5041 RSXA-L/28/54···* 58 677··· ···04 1 x 28/54 900 158 293 3.3 5041 RSXA-L/35/49/80···* 41 279··· ···04 ···07 1 x 35/49/80 1200 158 293 3.9 RAV5041 RAV-L/35/49/80···* 58 488··· ···04 ···07 1 x 35/49/80 1200 158 293 3.9 * Please order end caps separately.

ApplicationEducation and training, offices, sales areas, showrooms, banks and ticket halls.

Optical systemsDirect distribution. ···RPXA··· Energy-efficient parabolic louvre with asymmetrical light distribution, highly-specular, with reflection-intensifying silver surface, reflectance value > 98 %.···RSXA··· Energy-efficient parabolic louvre with asymmetrical light distribution, semi-specular, with reflection-intensifying silver surface, reflectance value > 98 %.···RAV··· Wallwasher reflector for asymmetri-cal light distribution. Reflector made of ultra-pure aluminium, highly-specular anodised.Louvre mounting and electrical earthing via spring-tensioned clips. Louvre can be hinged downwards and unhooked on both sides without tools.

Luminaire bodySheet steel, white powder-coated. Elegant rectangular design with longitudinal, 40 mm wide rim. Luminaire body with integral coupling profiles for precise alignment of continuous lines with non-interrupted louvres. Please order end caps for individual lumi-naires or continuous line ends separately.

Electrical version···E With electronic multi-lampcontrol gear.···EDD With digitally dimmable electronic multi-lamp control gear (DALI).


5041 RAV-L/49 EUTE: 0.86 EDIN 5040: A40CIBSE: BZ 4NBN L 14-002:BZ 5/2/BZ 4

5041 RPXA-L/49 EUTE: 0.80 BDIN 5040: A50CIBSE: BZ 1NBN L 14-002: BZ 2

5041 RSXA-L/49 EUTE: 0.80 BDIN 5040: A50CIBSE: BZ 1NBN L 14-002: BZ 2

94

5051 RPX-L···

5051 RPX-L···


Suspended luminaires with RPX highly-specular parabolic louvre of silver-coated aluminium

6 5 4 d a

Designation* TOC Electrical Lamps D D1 ≈kg version ···EDD W mm 5051 RPX-L/35/49/80···+ActiM* 58 694··· ···07 1 x 35/49/80 1493 11 3.85051 RPX-L/35/49/80···+LGM* 58 693··· ···07 1 x 35/49/80 1493 11 3.85051 RPX-L/35/49/80···+LGS* 58 772··· ···07 1 x 35/49/80 1493 11 3.8* Please order end caps for individual luminaires or for continuous line ends separately.

ApplicationEducation and training, offices, sales areas, showrooms, banks and ticket halls, and especially VDU workstations.

Optical systemDirect/indirect distribution. Energy-efficient parabolic louvre, highly-specular, with reflec-tion-intensifying silver surface, reflectance value > 98 %, suitable for VDU workstations in accordance with EN 12464-1 via reduced luminance L ≤ 1000 cd/m² for distribution characteristics above 65° all round. ···RPX··· Highly-specular.Louvre mounting and electrical earthing via spring-tensioned clips. Louvre can be hinged downwards and unhooked on both sides without tools.

Luminaire bodySheet steel, white powder-coated. Elegant rectangular design with longitudinal, 40 mm wide rim. Luminaire body with integral cou-pling profiles for precise alignment of continu-ous lines with non-interrupted louvres. Please order end caps for individual luminaires or continuous line ends separately.

Electrical version···EDD+ActiM With digitally dimmable, elec-tronic multi-lamp control gear (DALI) and integral ActiLume control device and sensor unit for daylight-dependent control and pres-ence detection.···EDD+LGM With digitally dimmable, electronic multi-lamp control gear (DALI) and integral LIGHTGATE control device and sensor unit for daylight-dependent control and presence detection.···EDD+LGS With digitally dimmable, electronic multi-lamp control gear (DALI) and integral LIGHTGATE sensor unit for the expansion of daylight-dependent control and presence detection.


5051 RPX-L/49 EUTE: 0.56 C + 0.35 TDIN 5040: B53 CIBSE: BZ 3/1/BZ 2 NBN L 14-002: BZ 2

95

5051 RSX-L···

5051 RSX-L···


Suspended luminaires with RSX semi-specular parabolic louvre of silver-coated aluminium

6 5 4 d a

Designation* TOC Electrical Lamps D D1 ≈kg version ···EDD W mm 5051 RSX-L/35/49/80···+ActiM* 58 769··· ···07 1 x 35/49/80 1493 11 3.85051 RSX-L/35/49/80···+LGM* 58 770··· ···07 1 x 35/49/80 1493 11 3.85051 RSX-L/35/49/80···+LGS* 58 771··· ···07 1 x 35/49/80 1493 11 3.8* Please order end caps for individual luminaires or for continuous line ends separately.

ApplicationEducation and training, offices, sales areas, showrooms, banks and ticket halls, and especially VDU workstations.

Optical systemDirect/indirect distribution. Energy-efficient parabolic louvre, highly-specular, with reflec-tion-intensifying silver surface, reflectance value > 98 %, suitable for VDU workstations in accordance with EN 12464-1 via reduced lumi-nance L ≤ 1000 cd/m² for distribution charac-teristics above 65° all round. ···RSX··· Semi-specular.Louvre mounting and electrical earthing via spring-tensioned clips. Louvre can be hinged downwards and unhooked on both sides without tools.

Luminaire bodySheet steel, white powder-coated. Elegant rectangular design with longitudinal, 40 mm wide rim. Luminaire body with integral cou-pling profiles for precise alignment of continu-ous lines with non-interrupted louvres. Please order end caps for individual luminaires or continuous line ends separately.

Electrical version···EDD+ActiM With digitally dimmable, elec-tronic multi-lamp control gear (DALI) and integral ActiLume control device and sensor unit for daylight-dependent control and pres-ence detection.···EDD+LGM With digitally dimmable, electronic multi-lamp control gear (DALI) and integral LIGHTGATE control device and sensor unit for daylight-dependent control and presence detection.···EDD+LGS With digitally dimmable, electronic multi-lamp control gear (DALI) and integral LIGHTGATE sensor unit for the expansion of daylight-dependent control and presence detection.


5051 RSX-L/49 EUTE: 0.56 C + 0.35 TDIN 5040: B53 CIBSE: BZ 3/1/BZ 2 NBN L 14-002: BZ 2

96

Adapter end cap1 piece, die-cast aluminium, white, for con-nection to A 03··· nodes, with 5-core 1.5 mm² through-wiring.

Node1 piece, for up to four branchings, adjustable with freely selected angle of 90° to 270°. Die-cast aluminium, white.

Ceiling distance plate (not shown)1 pair, plastic, white, for ceiling distance mounting of 504··· luminaires together with A 03 D nodes. 1 pair of ceiling distance plates is required per luminaire.

Through-wiringColour-coded, heat-resistant individual cables, 1.5 mm². ···3LV··· 3-conductor through-wiring.···5LV··· 5-conductor through-wiring.

Ordering example:Continuous line configuration according to above diagram with

8 luminaires 5041 RPX-L/35/49/80 E 6 luminaires 5041 RPX-L/28/54 E 14 end caps 05041 KA 6 nodes A 03 D 14 pairs distance plates 05000 DD 4 through-wiring sets 3700/5LV/58 3 through-wiring sets 3700/5LV/36

05041 KA 21 539 00

A 03 D 22 315 00

05000 DD 21 513 00

3700/3LV/36 11 450 00For 28 W, 54 W luminaires.3700/5LV/36 11 452 00For 28 W, 54 W luminaires.3700/3LV/58 11 451 00For 35 W, 49 W, 80 W luminaires.3700/5LV/58 11 453 00For 35 W, 49 W, 80 W luminaires.07690/5LV/25m 21 890 00For ···L··· luminaires.

Series 504···, 505···Accessories

97

Node with wire suspension1 piece, consisting of:1 node as with A 03 D,1 steel wire, ¶ 2.0 mm, for suspension

lengths to 1.5 m,1 ceiling fixing element.

Feeding tube*1 piece, plastic, white, ¶ 10 mm, can be cut to specification on-site. For routing and cladding of mains connection cable.

PLEXIGLAS cover1 piece, can be attached without tools. For protection against soiling of lamp and optical system with suspended louvre luminaires 505···.

Ceiling rose*1 piece, for connection of power feed line via ceiling outlets. Suitable for accommodation of A 03 S ceiling fixing element.

1 piece, for connection of power feed line via ceiling outlets.

* Cables not included in delivery; must be made available on-site.

End caps1 pair, for single luminaires and the front-sides of continuous lines. Plastic, white. Can be attached without tools.

Wire suspension1 piece, for suspended mounting of5041··· and 5051··· luminaires, consisting of:1 ceiling fixing bracket, steel, galvanised,1 steel wire, ¶ 1.0 mm,2 luminaire fixing clamps,1 ceiling trim, plastic, white.

Wiring connection unit* (not shown)1 set, for mains feeding with 05051 S, 05051 S/2m, consisting of necessary strain relief system, fastening screws and connector terminal, 4 x 2.5 mm².

Counter-balance weight (not shown)Required for mounting to node A 03 S and grid 07690···.

A 03 S 29 284 00 05041 K 21 538 00

05000 ESBN 21 517 00

05051 S 21 543 00Suspension height to 1.0 m05051 S/2m 21 544 00Suspension height to 2.0 m

05000 A19 21 501 0005000 A25 43 798 0005000 A26 43 799 0005000 A27 43 800 00

05000 ZR 21 525 001 m long, together with 05051 S.05000 ZR/2m 21 526 002 m long, together with 05051 S/2m or A 03 S with 05900 AN.

05051 P/1200 21 541 00For luminaires 5051 R··· 28 W, 54 W.05051 P/1500 21 542 00For luminaires 5051 R··· 35 W, 49 W, 80 W.

05900 AN 21 726 00

05900 A 21 725 00

98

7402N/LED···

A classic form goes with the times. A surface-mounted luminaire with a classic design and future-fit LED technology. Entrance zones, recreation rooms, corridors and stairwells are cast in gentle yet efficient light with the 7402 LED.

Timeless: functional design classic with the latest LED technology.Pleasant: soft light in complete harmony with a spherical, opal functional diffuser.Versatile: can be flexibly used for indoor applications and is ideal for wall or surface-mounting.Decorative: decorative covers allow different appearances both in form and colour.Efficient: time-saving mounting and rapid attachment of the diffuser via simple rotary bayonet fixing mechanism.

99

7402N/LED···

7402N/LED··· + 07402 ZQ 01 7402N/LED··· + 07402 ZQ 03 7402N/LED··· + 07402 ZQ 05

C0- C180

Accessories TOC DescriptionDecorative attachments, square07402 ZQ 01 56 850 00 White, 470 x 470 mm07402 ZQ 03 58 714 00 Silver-grey, 470 x 470 mm07402 ZQ 05 56 851 00 Black, 470 x 470 mm

ApplicationCeiling and wall luminaires for entrance areas, corridors, stairways, lounges, hotels, restaurants and residential zones.

Optical systemConsisting of 24 LEDs and opal PLEXIGLAS diffuser with finely textured surface with deco-rative matt design effect. Circular diffuser, spherical, especially dimensionally stable. Secure diffuser fixing with bayonet fixing mechanisms. LED, warm white light colour, colour temperature 2800 K, colour rendering index Ra > 80, total luminous flux 1300 lm, connected load 27 W.

Luminaire bodySheet steel, white powder-coated. Suitable for ceiling and wall mounting.

Electrical version···ET With electronic transformer.

Series 7402N/LED···Round surface-mounted luminaire with opal PLEXIGLAS diffuser

6 5 d a IP20 0.35 joules 650 °C

7402N/LEDUTE: 0.89 G + 0.11 T DIN 5040: B30 CIBSE: BZ 6/.75/BZ 5/1/BZ 6 NBN L 14-002: BZ 5

Designation TOC Electrical Lamps/ Power E1 E2 D ≈kgversion Luminous flux/ consump-···ET Light colour tion mm mm mm

7402N/LED 1400··· 59 748··· ···40 LED/1400 lm/ww 27 W 13 62 220 2.0

RReeccesssseedd luminaires

102

Solvan LED-Easy

103

Individual ambiences:whether efficient general lighting or atmospheric LED coloured light – TRILUX Solvan LED-Easy can do both. According to your wishes. Wholly individually. And with complete simplicity.

Individual: individual coloured light design with full colour illumination of the diffuser.“Easy”: with integral Easy lighting control system.Mature: low construction height for almost flush recess-mounting.

Decorative: slender design with harmonious proportions.The slender, diffuse light emission surface of the Solvan recessed luminaire is surrounded by a very flat profiled rim. The profile thus merely appears as a contour, predestined for architecturally sophisticated lighting solutions.

104

C0- C180

C0- C180

Solvan C1-L··· +LED-Easy 01

Solvan Recessed luminaires with covers made of opal PLEXIGLAS (OTA)and polycarbonate (OA-PC)

6 5 4 d a

ApplicationVery slender recessed continuous line lumi-naire for cut-out recess openings, also espe-cially for implementation of architecturally sophisticated light channels. Also suitable for installation in metal plank ceilings (module 100). For visual and sensory lighting in con-ference and office areas, corridors, foyers, exhibition and sales areas.···LED-Easy··· with RGB LED for individual colour light design.

Optical systemsOpal cover, flush mounted in luminaire housing.···OTA··· With finely textured surface made of PLEXIGLAS.···OA-PC··· With smooth surface made of polycarbonate.···LED-Easy··· Coloured illumination of cover via RGB LEDs integrated in the luminaire. Alternative to general lighting (T5) for individ-ual colour light.

Luminaire bodySheet steel, white powder-coated. Very slen-der appearance with extremely flat luminaire trim of 3 mm. Continuous lines via connection of luminaire bodies with tool-free installation. Cut-out recess-mounting via rapid-mounting springs. With cable inlets on front planes for heat-resistant through-wiring. Please order end caps for individual luminaires or continu-ous lines separately.

Electrical version···EDD+LED-Easy With digitally dimmable electronic multi-lamp control gear (DALI) for T5 lamps (general lighting) and integral Easy lighting control unit for LED-RGB (colour light design), control via infra-red remote control or push button coupler, both to be ordered separately, see page 188.

IP20 0.2 joules 650 °C ···OA-PC··· 850 °C

Solvan C1-L OTA 135 EUTE: 0.60 EDIN 5040: A40CIBSE: BZ 4NBN L 14-002:BZ 5/2.5/BZ 4

Solvan C1-L OA-PC 135 EUTE: 0.54 EDIN 5040: A40CIBSE: BZ 4NBN L 14-002: BZ 5/2/BZ 4

105

1176/28W1476/35W

10 10

75

6484

98

196 235

1176/28W1476/35W

10

75

6484

98

196 235

62

62

Solvan···OTA/OA-PC···

Accessories ······························106

Designation TOC Electrical Lamps Cut-out ≈kg version opening

···EDD W L x W (mm) Solvan C1-L OTA 128+···+LED-Easy 01 58 464··· ···54 1 x 28 + LED-Easy 1184 x 73 3.0 Solvan C1-L OTA 135+···+LED-Easy 01 58 465··· ···54 1 x 35 + LED-Easy 1484 x 73 3.6

Solvan C1-L OA-PC 128+···+LED-Easy 01 58 466··· ···54 1 x 28 + LED-Easy 1184 x 73 3.0 Solvan C1-L OA-PC 135+···+LED-Easy 01 58 467··· ···54 1 x 35 + LED-Easy 1484 x 73 3.6

106

Designation TOCSolvan ZBB/1 58 305 00

Designation TOCSolvan ZBP 28/54 01 for Solvan···OTA/OA··· 51 880 00Solvan ZBP 35/49/80 01 for Solvan···OTA/OA··· 51 881 00

Designation TOCSolvan ZLK 1 OTA/OA for Solvan C1···OTA/OA··· 51 892 00

Designation TOCSolvan ZKS 1 01 for Solvan C1···, white 51 874 00

Mounting set for recess openings1 set, for tool-free installation in ceiling recess openings (Ceiling thickness 12.5/15/20 mm). With 12.5 mm ceiling thickness, also possible with 60/27 C-profile.

Mounting set for metal plank ceilings1 set, suitable for installation of 1-lamp Solvan continuous line luminaires in strip ceilings (module 100).

Continuous line coupling OTA/OA1 set, for connecting two Solvan continuous line luminaires with cover.

End caps1 pair, for termination on front planes of individual luminaires and continuous lines, snap-fits without tools.

Solvan recessed luminairesAccessories

107

Designation TOCSolvan ZDV 515 28/54 5-core, for luminaire length 28/54 51 886 00Solvan ZDV 515 35/49/80 5-core, for luminaire length 35/49/80 51 887 00

Designation TOC03630 S 29 265 00

Through-wiringColour-coded, heat-resistant individual wires for internal through-wiring with continuous lines, 1.5 mm².

Removal toolSuction pad for removal of OA and OTA covers for maintenance.

108

Liventy

An impressive appearance with unusually high efficiency.The remarkable reduction of light spill of the TRILUX Liventy opal diffuser material is impressively underlined with a luminaire light output ratio of 85 %. As well as versions with doubly arched diffusers, the new Liventy Flat version also takes up the linear geometry of the luminaire body.

Elegant: an attractive appearance thanks to the synergy of an organic form with linear characteristics.Setting in-scene: all-round light emission for soft illumination of the ceiling.Efficient: unusually high light output ratios via filigree specular louvre with UXP-Technology® combined with a highly efficient plastic diffuser.Diversity: different optical systems and diffuser positions allow individual flexibility of use.Clean: sealed luminaire reliably protects against external factors and is easy to clean.

109

Adjustable diffuser positionsTwo diffuser positions for various applications:In the first setting step the luminous sides of the opal diffuser increase ceiling illumination. In the second step the diffuser body enters further into the ceiling.

High grade materials and efficiencyEven at first glance, Liventy is different to other ceiling luminaires thanks to its extrava-gant profile. The optimised, structured surface of the diffuser performs with a high degree of transmission, uniform illumination and light output ratios of up to 85 %.

UXP-Technology®

Liventy UXP-S combines the elegantly curved diffuser appearance with a modern ultra-low cross-section louvre from TRILUX. The Liventy 600 UXP version enables use in ventilated ceilings as standard, for air exchange of up to 40 l/sec.

VersatilityWith the variety of geometries for various modular ceiling systems and different diffuser contours, Liventy offers high flexibility for adaptation to the desired spatial atmosphere.

110

C0- C180 C0- C180

C0- C180 C0- C180

270297

138 92

max

. 50274

46

6

11701197

26

1174

Liventy 600 OT···

Liventy 600 OT···Liventy 300 OT···

Liventy 300 OT···

LiventyRecessed luminaires with decorative PLEXIGLAS diffuserRecessed luminaires with decorative PLEXIGLAS diffuser and semi-specular ultra-low cross-section louvre UXP-S

6 5 4 d a

ApplicationFor greater lighting comfort in offices, banks, foyers, sales, exhibition and conference areas. Can be universally used in ceilings with recess cut-out openings and in ceiling systems with concealed or visible grids.Liventy 300··· For module 300 mm.Liventy···600··· For module 600 mm.Liventy···625··· For module 625 mm.

Optical systems···OT··· Opal PLEXIGLAS diffuser with struc-tured surface, doubly arched, protruding on the room side giving decorative ceiling illumi-nation, for increased lighting comfort. Espe-cially high transmission factor and light output ratio. Diffuser can be fixed into luminaire body without tools, snapped-in at two different depths.

···UXP-S OT··· Centrally positioned ultra-low cross-section louvre with UXP-Technology®, semi-specular, reflectance value 98 %. Opal PLEXIGLAS diffuser flush on both sides with structured surface, arched, protruding on the room side giving decorative ceiling illumina-tion, for increased lighting comfort. Especially high transmission factor and light output ratio.

Liventy Flat···OT··· Opal PLEXIGLASdiffuser with structured surface, protruding on the room side giving decorative ceiling illu-mination, for increased lighting comfort. Espe-cially high transmission factor and light output ratio. Diffuser fixed into luminaire body without tools, snapped-in at two different depths.

Liventy 600 OT 314···UTE: 0.80 E + 0.05 TDIN 5040: A40CIBSE: BZ 5NBN L 14-002: BZ 5

Liventy 300 OT 228···UTE: 0.68 G + 0.07 T DIN 5040: A30 CIBSE: BZ 5 NBN L 14-002: BZ 5

Luminaire bodySheet steel, white, powder-coated solvent-free.

Electrical version···E With electronic control gear.···ESD With dimmable electronic control gear, with DSI interface.···EDD With digitally dimmable electronic control gear (DALI).

IP40 2 joules 650 °C ···UXP··· IP20

Liventy 600 UXP-S OT 414···UTE: 0.73 D + 0.02 TDIN 5040: A40CIBSE: BZ 3/.75/BZ 4NBN L 14-002: BZ 4

Liventy Flat 600 OT 414···UTE: 0.75 E + 0.04 T DIN 5040: A40 CIBSE: BZ 5 NBN L 14-002: BZ 5

111

Liventy 600 UXP-S OT···Liventy 625 OT··· Liventy 625 UXP-S OT··· Liventy Flat 600··· Liventy Flat 625···

Liventy 600 UXP-S OT··· Liventy Flat 600 OT···

572597

122

30

92

6m

ax. 5

0574

10

572597

574

572622

122

30

92

6m

ax. 5

0574

10

572622

574

Lamp data ································193

Designation TOC Electrical version Lamps Axis Recess ≈kg dimension opening ···E ···ESD ···EDD W mm mm Liventy 300 OT 128/54 E 59 061··· ···04 ···11 ···07 1 x 28/54 300 280 x 1180 4.9Liventy 300 OT 228/54 E 59 062··· ···04 ···11 ···07 2 x 28/54 300 280 x 1180 5.0 Liventy 600 OT 314···01 56 753··· ···04 ···11 ···07 3 x 14 600 580 x 580 4.9 Liventy 600 OT 324···01 56 754··· ···04 ···11 ···07 3 x 24 600 580 x 580 5.1 Liventy 600 OT 414···01 56 755··· ···04 ···11 ···07 4 x 14 600 580 x 580 4.9

Liventy 625 OT 314···01 56 756··· ···04 ···07 3 x 14 625 580 x 580 4.9Liventy 625 OT 324···01 56 757··· ···04 ···07 3 x 24 625 580 x 580 5.1Liventy 625 OT 414···01 56 758··· ···04 ···07 4 x 14 625 580 x 580 4.9

Liventy 600 UXP-S OT 214+224···01 56 760··· ···04 ···11 ···07 2 x 14 + 2 x 24 600 580 x 580 6.4 Liventy 600 UXP-S OT 414···01 56 759··· ···04 ···11 ···07 4 x 14 600 580 x 580 6.1

Liventy 625 UXP-S OT 214+224···01 56 762··· ···04 ···07 2 x 14 + 2 x 24 625 580 x 580 6.5 Liventy 625 UXP-S OT 414···01 56 761··· ···04 ···07 4 x 14 625 580 x 580 6.2

Liventy Flat 600 OT 314···01 58 996··· ···04 ···07 3 x 14 600 580 x 580 4.9Liventy Flat 600 OT 324···01 58 997··· ···04 ···07 3 x 24 600 580 x 580 5.1Liventy Flat 600 OT 414···01 58 998··· ···04 ···07 4 x 14 600 580 x 580 4.9

Liventy Flat 625 OT 314···01 58 999··· ···04 ···07 3 x 14 625 580 x 580 4.9Liventy Flat 625 OT 324···01 59 000··· ···04 ···07 3 x 24 625 580 x 580 5.1Liventy Flat 625 OT 414···01 59 001··· ···04 ···07 4 x 14 625 580 x 580 4.9

Accessories TOC DescriptionFixing accessoriesLiventy ZBB 56 763 00 1 set (4 pieces) of fixing accessories for recess-mounting in ceilings

with concealed grids and ceiling recess openings

LLLiighhtt cchannel

114

Alinio

Seamless all the way.With segments 3 metres in length and overlapping socket positions, Alinio guarantees harmonious illumination of both room and light line along any distance.

Elegant: discreet and very slimline aluminium profile with high quality eloxal surface.Guiding: the light line sets linear accents and emphasises spacial contours.Linear: purist, linear appearance.Continuous: homogeneous illumination over the complete length without disturbing dark zones.Comprehensible: modular system with few individual parts; easily understandable mounting concept.

115

SeamlessA new cover concept underlines the uniform appearance. With Alinio the diffuse cover is taken from the roll along the complete length, meaning no visible joins along the line. The optically uninterrupted light creates an appealing interplay of light, space and architecture.

OverlappingDiagonally offset socket positions are the basis of the homogenous Alinio illumination. Dark spots from linear configurations of sockets and lamp bases are a thing of the past. The concept also applies to the various gear trays, meaning that these can be freely combined.

No toolsWith the exception of continuous line cou-plings, actual mounting is completely without tools. Through-wiring is via an integral 5-pole connection system. Beginning with the cable, time-saving mounting is therefore ensured until the end of the continuous line. The end caps have a special effect on the linear Alinio appearance. These have no visible screw fastenings and are of course fixed without tools.

116

Alinio···

C0- C180

AlinioLight channel

ApplicationLight channel in filigree cubic form for linear, uninterrupted continuous lines. For illumina-tion of public areas, corridors, exhibition and sales areas.Also suitable for suspended mounting, vertical and horizontal surface-mounting to walls.

Trunking Alinio D1 3000 07Extruded aluminium, anodised. For accommodation of gear trays and covers as a continuously optical system. Length 3000 mm.

Gear tray Alinio X···01Sheet steel, white. With diagonally overlap-ping lamp configuration for homogeneous illumination of light emission surface. Fasten-ing to trunking with tool-free spring-tensioned contact clips.

Electrical connectionVia 5-pole plug connection to fixed through-wiring.


Optical system Alinio D1 OA 3000Opal diffuser made of polycarbonate, for termination of Alinio trunking on room side, length 3000 mm.

Accessories

End capsAlinio D1 ZKS 071 pair, anodised, for termination of continuous lines on front planes, snap-fits without tools.

Continuous line coupling Alinio D1 ZLK1 set, for connection of two Alinio trunking profiles with continuous diffuse enclosure.

Wire suspension Alinio D1 ZS/1500, ···3000, ···60001 piece, 1-point, snap-fits without tools, for suspension lengths to 1500 mm, ···3000 mm, ···6000 mm.

Cable Alinio D1 ZZT/3(5)15/1500, ···3000, ···6000Transparent mains cable, 3 (5) x 1.5 mm², for suspension lengths to 1500 mm, ···3000 mm, ···6000 mm.

Fixing clampwith slotted washer for direct ceiling fixing, for tool-free clipping in of trunking. Distance between trunking and mounting surface: 9 mm.

Ceiling rose1 piece, for connection of power cable via ceiling out lets.

6 d a IP20

Alinio X 49 WUTE: 0.48 E + 0.00 TDIN 5040: A40 CIBSE: BZ 3/.75/BZ 4 NBN L 14-002: BZ 4

117

56

2648

880/39W, 1180/54W, 1480/49W

110 110

100

max. 3000

90

75

max. 3000

max

. 600

0

75

90

max. 3000

max. 3000

100

Alinio D1 3000···Alinio X···

Lamp data ································193

Designation TOC Electrical Lamps Dimensions ≈kg version

Gear tray ···E ···EDD W mm Alinio X 121/39···01 59 677··· ···04 ···07 1 x 21/39 880 1.0Alinio X 128/54···01 59 678··· ···04 ···07 1 x 28/54 1180 1.3Alinio X 135/49···01 59 676··· ···04 ···07 1 x 35/49 1480 1.6

Designation TOC DescriptionTrunkingAlinio D1 3000 07 59 675 00 Trunking, anodised, 3000 mm Trunking accessoriesAlinio D1 OA 3000 59 679 00 Diffuser, diffuse, smooth surface, 3000 mm Alinio D1 ZKS 07 59 689 00 End cap, anodised, 1 pair, for front-side termination Alinio D1 ZLK 59 690 00 Continuous line coupling for connecting two main trunking profilesFixing accessories D 01 X 23 212 00 Fixing clamp for direct ceiling fixing Alinio D1 ZS/1500 59 680 00 Decorative wire suspension, with suspension clamp, 1500 mm Alinio D1 ZS/3000 59 681 00 Decorative wire suspension, with suspension clamp, 3000 mm Alinio D1 ZS/6000 59 682 00 Decorative wire suspension, with suspension clamp, 6000 mm Mains cable, transparent Alinio D1 ZZT/315/1500 59 683 00 Mains cable, transparent, 3 x 1.5 mm², 1500 mm Alinio D1 ZZT/315/3000 59 684 00 Mains cable, transparent, 3 x 1.5 mm², 3000 mm Alinio D1 ZZT/315/6000 59 685 00 Mains cable, transparent, 3 x 1.5 mm², 6000 mm Alinio D1 ZZT/515/1500 59 686 00 Mains cable, transparent, 5 x 1.5 mm², 1500 mm Alinio D1 ZZT/515/3000 59 687 00 Mains cable, transparent, 5 x 1.5 mm², 3000 mm Alinio D1 ZZT/515/6000 59 688 00 Mains cable, transparent, 5 x 1.5 mm², 6000 mm Ceiling rose ZAE/01 46 917 00 1 piece, square, white.ZAE/03 46 918 00 1 piece, square, silver-grey

LLLuuummmiinnaaaiiirrrrreeeessss fffffooorr ssppeeecccciiiiaaaalll aaarrreeas of application

120

Mirona LED

A compact performer with a high intellect.With its neutral white LED light, high protection rating and integral sensor technology enabling high levels of energy savings, TRILUX Mirona is ideally suited for industrial use, specifically for the foodstuffs industry but also for all other sectors requiring tough and flexible lighting.

Safe: an extremely robust, compact concept with vibration-resistant components. Light can be used instantly without start-up time.High performance: a high lumen package and uniform lumen yield even with very low temperatures.Low operating costs: low maintenance, with extremely time-saving installation thanks to plug and play.Efficient: depending on configuration, Mirona switches off automatically or dims if not needed.Versatile: can be flexibly used for indoor and outdoor applications and is ideal for wall or surface-mounting as well as flush recess-mounting.

121

Highly efficient silver opticsWhether symmetrical or asymmetrical distribution, highly developed Miro silver louvres mean maximum efficiency.

Quick connectionsTime-optimised mounting with a high pro-tection rating using the Wieland RST rapid connector system.

Presence detectionThe ···+S··· versions have an integral presence detector for reduction of power consumption by ~35 % after 10 minutes of full load. The detection area of the sensor is 6 m in diameter (on the floor, with mounting height of 4.5 m).

122

Mirona···

C0- C180

Mirona LEDWall and ceiling luminaire

ApplicationHigh rooms, halls, warehouses and manufac-turing bays, trade fair and exhibition halls. Also for damp rooms and outdoor areas in open weather.

Optical systemConsisting of 120 high power LEDs with preci-sion lenses for each group of 4 LEDs and with transparent cover.···MR··· Symmetrical distribution.···MRA··· Asymmetrical distribution.···12000··· LED with constant colour stability and a colour rendering index of Ra > 65 over the complete service life. Neutral white light colour (···nw···), colour temperature 4000 K, total luminous flux 10300 lm, switchable connected load (···ET···) 131 W, dimmable (···ETDD···) 125 W.···9000··· LED with constant colour stability and a colour rendering index of Ra > 80 over the complete service life. Neutral white light colour (···nw···), colour temperature 4000 K, total luminous flux 7600 lm, switchable connected load (···ET···) 131 W, dimmable (···ETDD···) 125 W.

Luminaire bodyRobust die-cast housing with integral cooling fins, coated graphite grey. Mains cable via Wieland RST rapid connector system.

Mounting typesSurface-mounting, wall-mounting, chain suspension, in each case with corresponding accessories.

Electrical connectionWieland RST rapid connector system, in each case with corresponding accessories.

Electrical versionWith electronic mains power for minimum service life of 50000 operating hours. Due to optimised thermal management, suitable for ambient temperatures from -25 °C to +40 °C.···+S··· With integral presence detection for reduction to light level of 35 % after 10 minutes, power consumption ~ 45 W (other settings on request). ···ET With electronic transformer.···ETDD With digitally dimmable electronic transformer (DALI).

6 5 4 d o a IP65 2 joules 850 °C

Mirona MR LED 12000UTE: 1.00 C + 0.00 TDIN 5040: A50CIBSE: BZ 3/2/BZ 2NBN L 14-002: BZ 3

123

Mirona··· Mirona A KSPY

Mirona A MB Mirona A WB

325

128

325

E

325

128

151

325

min

. 470

E

331

325

12818

2

230

325

250

160

50E

8,5

41,5 x 8,5

331 257

72128

180

331

325

325

65

110 110

12,520x12,512,5x20E

Designation TOC Electrical version Lamps/ Power ≈kg ···ET ···ETDD Luminous flux/ consumption

Light colour Mirona MR LED 12000 nw···TWW 59 452··· ···40 ···51 LED/12 000 lm/nw 131 W (···ET···)/125 W (···ETDD···) 11.2Mirona MR LED 12000 nw···+S TWW 59 453··· ···51 LED/12 000 lm/nw 125 W 11.2Mirona MR LED 9000 nw···TWW 59 454··· ···40 ···51 LED/ 9 000 lm/nw 131 W (···ET···)/125 W (···ETDD···) 11.2Mirona MR LED 9000 nw···+S TWW 59 455··· ···51 LED/ 9 000 lm/nw 125 W 11.2Mirona MRA LED 12000 nw···TWW 59 448··· ···40 ···51 LED/12 000 lm/nw 131 W (···ET···)/125 W (···ETDD···) 11.2Mirona MRA LED 12000 nw···+S TWW 59 450··· ···51 LED/12 000 lm/nw 125 W 11.2Mirona MRA LED 9000 nw···TWW 59 449··· ···40 ···51 LED/ 9 000 lm/nw 131 W (···ET···)/125 W (···ETDD···) 11.2Mirona MRA LED 9000 nw···+S TWW 59 451··· ···51 LED/ 9 000 lm/nw 125 W 11.2

Accessories TOC Description

Mirona AMB 59 456 00 Rapid-mounting ceiling plate MironaMirona AWB 59 457 00 Fixing bracket for wall-mounting MironaMirona AKSPY 59 458 00 1 set, 2-point chain suspension in Y-form with turnbuckleZWI RST20i3 BT sw 59 459 00 Connector, 3-pole, straight, black, WielandZWI RST20i3 BT 90° sw 59 461 00 90° angle connector, 3-pole, black, WielandZWI RST20i5 BT tbl 59 491 00 Connector, 5-pole, straight, turquoise, Wieland (dim.)ZWI RST20i5 BT 90° tbl 59 462 00 90° angle connector (dim.), 5-pole, turquoise, Wieland

124

Durata

125

Efficient reliability for industry.Durata is extremely adaptable: durable and also suitable for higher ambient temperatures, and thanks to an adjustable reflector the luminaire can be used for both narrow- or wide-angle light distribution.

Robust: robust concept for high protection ratings in everyday industrial applications.Low operating costs: low maintenance, with extremely time-saving installation thanks to plug and play and pre-installed through-wiring.Adaptable: reflector can be adjusted on-site between wide- to narrow-angle light distribution, enabling optimal adaptation to various mounting heights.Safe: tried-and-tested components, light can be used instantly without start-up time.Long-life: especially suitable for high ambient temperatures due to outstanding thermal management.

Efficient mountingCan be rapidly installed by one person with the AMB rapid-mounting plate because of low weight of luminaire.

Height adjustmentWith integral height adjustment for adaptation of distribution characteristics from wide-angle to narrow-angle light distribution, with step-less adjustment.

Connection···CW··· With integral 5 x 2.5 mm² through- wiring (EDD 7 x 2.5 mm²) and Wieland rapid connector, compatible with Wieland gesis RST > IP65 system.

126

Durata···

Durata HD··· + Durata ZK/SPY Durata HD··· + Durata ZS/2,5 Durata HD··· + Durata ZBP 22

C0- C180

1500

425

E

75 E

1514

1500

425

E

75 E

1514

288 1500

425

E

75 E

1514

278

83

1701460120

DurataHigh bay luminaires

ApplicationHigh rooms, halls, warehouses and manufac-turing bays, trade fair and exhibition halls. Drip water-protected, protection rating IP22. Foodstuffs industry and damp rooms.···IP··· Protection rating IP65.

Optical systemsEnergy-efficient specular reflectors for maximum light output ratios, highly-specular, with reflection-intensifying silver surface, reflectance value > 98 %.···HR··· Extremely narrow-angle light distribu-tion for high halls.···SB··· Wide-angle light distribution, can be set to narrow-angle light distribution on-site.

Luminaire bodySheet steel, galvanised, white powder-coated, especially torsionally rigid via continuous an-gled rods on ceiling side and beading on front planes. IP22 protection rating.···IP··· Protection rating IP65.

Electrical connectionVia a frontal service flap.···CW··· With integral 5 x 2.5 mm² through- wiring (EDD 7 x 2.5 mm²) and Wieland RST rapid connector.

Electrical version···E With electronic control gear.···EDD With digitally dimmable electronic control gear.Control gear for minimum service life of 10,000 operating hours. Optimised thermal management enables high ambient tempera-tures to 40°.

6 4 d a IP22 0.2 joules ···IP··· IP65 2 joules 850 °C

Durata HD HR/449···UTE: 0.94 D + 0.00 T DIN 5040: A50 CIBSE: BZ 3 NBN L 14-002: BZ 3

127

Durata HD···-IP··· + Durata ZK/SPY Durata HD···-IP··· + Durata ZS/2,5 Durata HD···-IP··· + Durata ZBP 22

1655

1625

370

E

120 E

1600

1655

370

E

120 E

1600

288 1625

203

1555

1625

170

332

370

278

E

120 E

1600

120

1655

Lamp data ································193

Designation TOC Electrical version Lamps ≈kg ···E ···EDD W

SBDurata HD SB/435··· 59 063··· ···04 ···07 4 x 35 10.1Durata HD SB/435···CW 59 120··· ···04 ···07 4 x 35 10.5Durata HD SB/449··· 59 065··· ···04 ···07 4 x 49 10.2Durata HD SB/449···CW 59 122··· ···04 ···07 4 x 49 10.6Durata HD SB/480··· 59 067··· ···04 ···07 4 x 80 10.2Durata HD SB/480···CW 59 124··· ···04 ···07 4 x 80 10.6HR Durata HD HR/435··· 59 064··· ···04 ···07 4 x 35 10.2Durata HD HR/435···CW 59 121··· ···04 ···07 4 x 35 10.6Durata HD HR/449··· 59 066··· ···04 ···07 4 x 49 10.3Durata HD HR/449···CW 59 123··· ···04 ···07 4 x 49 10.7Durata HD HR/480··· 59 068··· ···04 ···07 4 x 80 10.3Durata HD HR/480···CW 59 125··· ···04 ···07 4 x 80 10.7

SB-IPDurata HD SB-IP 435··· 59 069··· ···04 ···07 4 x 35 19.6Durata HD SB-IP 435···CW 59 126··· ···04 ···07 4 x 35 20.0Durata HD SB-IP 449··· 59 071··· ···04 ···07 4 x 49 19.7Durata HD SB-IP 449···CW 59 128··· ···04 ···07 4 x 49 20.1Durata HD SB-IP 480··· 59 073··· ···04 ···07 4 x 80 19.7Durata HD SB-IP 480···CW 59 130··· ···04 ···07 4 x 80 20.1HR-IPDurata HD HR-IP 435··· 59 070··· ···04 ···07 4 x 35 19.7Durata HD HR-IP 435···CW 59 127··· ···04 ···07 4 x 35 20.1Durata HD HR-IP 449··· 59 072··· ···04 ···07 4 x 49 19.8Durata HD HR-IP 449···CW 59 129··· ···04 ···07 4 x 49 20.2Durata HD HR-IP 480··· 59 074··· ···04 ···07 4 x 80 19.8Durata HD HR-IP 480···CW 59 131··· ···04 ···07 4 x 80 20.2

Accessories TOC DescriptionWire suspension Durata ZS/2,5 59 434 00 1 set, 4-point wire, 2.5 mm², for suspension lengths to 1700 mm Chain suspension Durata ZK-SPY 59 435 00 1 set, 2-point in Y-form with turnbuckle Mounting plate Durata ZBP 22 59 468 00 1 piece one-man rapid-mounting plate for direct ceiling fixing, IP22Durata ZBP 65 59 469 00 1 piece one-man rapid-mounting plate for direct ceiling fixing, IP65Link chain E04 23 434 00 Galvanised, 20 m long, can be cut to suit on-siteCable gland Accessories 7224 M20 29 164 00 1 pair cable glands, M20Ceiling fixing E01 23 420 00 1 piece ceiling fixing plate with spring hooksConnectors ZWI RST 20i5 BT 90° sw 59 465 00 90° angle connector, 5-pole, black, WielandZWI RST 20i5 BT sw 59 460 00 90° connector, 5-pole, black, Wieland ZWI RST 20i2 BT 90° gr 59 466 00 90° angle connector, 2-pole, grey, Wieland ZWI RST 20i2 BT gr 59 467 00 90° connector, 2-pole, grey, Wieland

128

E-Line T5NContinuous line system for T5 fluorescent lamps

The same profile for different configurationsIdentical luminaire cross-sections for single and twin lamp E-Line T5N gear trays.

Suspension

Trunking

End caps

T5N gear tray

Reflector end cap

E-Line T5N – the systemIndividual solutions with a univer-sal system. In short: E-Line. The rapid-mounting continuous line system enables a combination of practical single components exact-ly matched to individual conditions. Flexibility that convinces. Not at least because of the high equip-ment diversity, low cross-sections, innovative and energy-efficient silver optics and the homogenous overall appearance of the length-optimised modules: dark spots are avoided with continuous reflector configurations.

129

Highly efficient as standardSilver-refined specular optics now save up to 10 % of energy costs:

The highly reflective Miro Silver® layered system is used for all E-Line RPX and RSX louvres, all specular optics and the 4-lamp high bay luminaires. The refined surfaces increase reflective values up to 98 %. The effect: less power consumption.

The combination with TRILUX light control systems is especially advantageous. These additionally reduce power consumption ac-cording to lighting needs, and pass on the efficiency gains to the user in the form of electricity and cost savings.

Highly efficient trapezoid reflectorThe new trapezoid reflector is more than just white: The optically efficient, highly reflective powder coating now enables luminaire light output ratios of up to 97 %. As well as especially homogeneous light distribution, the new material leads to a significant increase in efficiency compared to pre-coated materials.

130

···SBF······STF···

···STB······UXP···

···UXP···

···STF···

E-Line T5NCombinations of reflectors with photometric components

Combination diversityCircular and rectangular reflectors can be diversely combined with photometric accesso-ries. Self-suspended E-Line reflectors have light-controlling optics, meaning that further photometric accessories are not required. In this way E-Line continuous lines can be precisely matched to project-specific photo-metric and architectural requirements.

The combination possibilities for reflectors with various photometric accessories is shown by the adjacent matrix. The page specifica-tions relate to the following product pages describing the characteristics of the corre-sponding components, their dimensions and the resulting photometrics, together with product and application images.

Page 142

Page 146

Page 138

Page 142

Page 142

Page 143

Page 146

Page 134

Page 145

Page 142

Page 140

Perforated circular reflectors07650 (M-)G/2807650 (M-)G/35

Circular reflectors07650 (M-)R/2807650 (M-)R/35

High reflectors07650 (M-)RH/35

Self-suspended specular reflector07650 SBF/3507650 STF/35

T reflector07650 T/2807650 T/35

Self-suspended specular reflector07650 SAF/35

Self-suspended specular reflector07650 SDAF07650 SDAFG

Hall reflector, narrow-angle light distribution07650 HRF/35

Rectangular reflector07651 M-STB/3507651 M-UXP-H/35

131

2 x

* SA-Ag, SB-Ag and SWW-Ag specular reflectors also in combina-tion with ···RW lamella louvre, see page 137.

Page 139

Page 140 Page 140 Page 141

Page 135 Page 136Page 136 Page 136 Page 144

Parabolic louvre

mattRMV

Lamella louvre

(M-)RW

semi-specularRSX-Ag

highly-specularRPX-Ag

narrow/wide-angle light distributionSWW-Ag*

Specular reflector

asymmetricalSA-Ag*

wide-angle light distributionSB-Ag*

4-lamp high bay, narrrow/wide light distribution 7654 HR

132

C0- C180

7651··· 7651 M···

E-Line T5NGear tray – protection rating IP20/IP40

ApplicationAs a basic element for all additional reflector and louvre components.

As a batten in rooms not used as work locations, e.g. storage rooms, utility rooms, subordinate rooms without permanently manned instant connection workstations.

Gear trayFastening to trunking with tool-free stainless steel snap fasteners. Sheet steel, white. IP40 with dust protection sealing, can be combined with all reflectors.···M··· Silver-grey.

Electrical connectionSelf-actuating with insertion of gear tray into the trunking. Lamp circuit connections can be set without tools to the conductor.


6 5 4 d a IP20/IP40 0.2 joules 850 °C

7651/49 UTE: 0.69 H + 0.23 TDIN 5040: B21CIBSE: BZ 6NBN L 14-002: BZ 6

133

87

6363

87

7652··· 7652 M···

7651··· 7652···

Gear tray for emergency lighting ··················148Trunking and wiring ·················150Accessories ······························155Mounting and planning ············157Suspension accessories ··········158Node mounting ························159Lamp data ································193

Designation TOC Electrical version Lamps Length ≈kg White ···E ···EDD W mm 7651/28/54··· 59 193··· ···04 ···07 1 x 28/54 1175 0.97651/35/49/80··· 59 194··· ···04 ···07 1 x 35/49/80 1475 1.2Silver-grey 7651 M/28/54··· 59 195··· ···04 ···07 1 x 28/54 1175 0.97651 M/35/49/80··· 59 196··· ···04 ···07 1 x 35/49/80 1475 1.2White 7652/28/54··· 59 197··· ···04 ···07 2 x 28/54 1175 1.0 7652/35/49/80··· 59 198··· ···04 ···07 2 x 35/49/80 1475 1.2 Silver-grey 7652 M/28/54··· 59 200··· ···04 ···07 2 x 28/54 1175 1.0 7652 M/35/49/80··· 59 201··· ···04 ···07 2 x 35/49/80 1475 1.2 IP40, white7651/35/49/80···IP40 59 979··· ···04 ···07 1 x 35/49/80 1470 1.37652/35/49/80···IP40 59 980··· ···04 ···07 2 x 35/49/80 1470 1.3Please order trunking separately.

134

C0- C180

117

103

117

103

07650 R··· 07650 M-R···

07650 R···

E-Line T5NCircular reflector R

ApplicationManufacturing facilities, workshops, assembly halls, supermarkets, trade fair halls, sales ar-eas.

Reflector RCircular reflector, sheet steel, galvanised, with white polyester coating. Fastening to gear tray with tool-free stainless steel snap fasteners.

Reflector M-RCircular reflector, sheet steel, galvanised, with polyester coating, silver-grey outer, white coated inner. Fastening to gear tray with tool-free stainless steel snap fasteners.

Reflector accessories···PC For increased fire protection.

6 4 d a IP20 0.2 joules 650 °C with PC accessories 850 °C

7651 R/49 UTE: 0.85 EDIN 5040: A40 CIBSE: BZ 4 NBN L 14-002: BZ 5/2.5/BZ 4

Designation TOC Component For gear tray, designation 1- or 2-lampWhite 07650 R/28 59 261 00 Reflector R 28, 54 W07650 R/35 59 262 00 Reflector R 35, 49, 80 WReflector accessories07690 RK 46 636 00 Reflector end cap 07690 RK PC 46 638 00 Reflector end cap, made of polycarbonate07690 RV 46 640 00 Reflector connector 07690 RV PC 46 642 00 Reflector connector, made of polycarbonateSilver-grey 07650 M-R/28 59 263 00 Reflector M-R 28, 54 W07650 M-R/35 59 264 00 Reflector M-R 35, 49, 80 WReflector accessories07690 M-RK 46 646 00 Reflector end cap 07690 M-RK PC 46 648 00 Reflector end cap, made of polycarbonate07690 M-RV 46 650 00 Reflector connector 07690 M-RV PC 46 652 00 Reflector connector, made of polycarbonatePlease order trunking and gear trays separately.

135

C0- C180

117

113

117

113

07650 R··· + 07650 RW··· 07650 M-R··· + 07650 M-RW···

07650 R··· + 07650 RW···

ApplicationManufacturing facilities, workshops, assembly halls, supermarkets, trade fair halls, sales areas.


Lamella louvre RWSheet steel, white. Can be hooked into circular reflector for simple maintenance.


Lamella louvre M-RWSheet steel, silver-grey. Can be hooked into reflector for simple maintenance.


Circular reflector R and lamella louvre RW

7651 RW/49 UTE: 0.77 E DIN 5040: A40CIBSE: BZ 3/4/BZ 4NBN L 14-002: BZ 4

Gear tray ··································132Gear tray for emergency lighting ··················148Trunking and wiring ·················150Accessories ······························155Mounting and planning ············157Suspension accessories ··········158Node mounting ························159Lamp data ································193

Designation TOC Component For gear tray, designation 1- or 2-lampWhite 07650 R/28 59 261 00 Reflector R 28, 54 W07650 RW/28 59 275 00 + Lamella louvre RW 28, 54 W07650 R/35 59 262 00 Reflector R 35, 49, 80 W07650 RW/35 59 276 00 + Lamella louvre RW 35, 49, 80 WReflector accessories07690 RK 46 636 00 Reflector end cap 07690 RK PC 46 638 00 Reflector end cap, made of polycarbonate07690 RV 46 640 00 Reflector connector 07690 RV PC 46 642 00 Reflector connector, made of polycarbonateSilver-grey 07650 M-R/28 59 263 00 Reflector M-R 28, 54 W07650 M-RW/28 59 277 00 + Lamella louvre M-RW 28, 54 W07650 M-R/35 59 264 00 Reflector M-R 35, 49, 80 W07650 M-RW/35 59 278 00 + Lamella louvre M-RW 35, 49, 80 WReflector accessories07690 M-RK 46 646 00 Reflector end cap 07690 M-RK PC 46 648 00 Reflector end cap, made of polycarbonate07690 M-RV 46 650 00 Reflector connector 07690 M-RV PC 46 652 00 Reflector connector, made of polycarbonatePlease order trunking and gear trays separately.

136

C0- C180 C0- C180 C0- C180

07650 R··· + 07650 SA···07650 R··· + 07650 SB··· 07650 R··· + 07650 SWW···

07650 R··· + 07650 S··· 07650 M-R··· + 07650 S···

104

117

104

117

E-Line T5NCircular reflector R with specular reflector SA-Ag, SB-Ag or SWW-Ag

6 4 d a IP20 0.2 joules 650 °C with PC accessories 850 °C

7651 R+SWW/49UTE: 0.99 CDIN 5040: A50CIBSE: BZ 4/2/BZ 3NBN L 14-002: BZ 3

7651 R + SB-AG/35UTE: 0.85 DDIN 5040: A40CIBSE: BZ 5/1,5/BZ 4NBN L 14-002: BZ 4

7651 R+SA-AG/49UTE: 0.89 EDIN 5040: A40CIBSE: BZ 3NBN L 14-002: BZ 5/.8/BZ 4

Designation TOC Component For gear tray, designation 1- or 2-lamp White, with SA-Ag specular reflector, asymmetrical 07650 R/35 59 262 00 Reflector R 35, 49, 80 W07650 SA-Ag/35 59 282 00 + Specular reflector SA-Ag 35, 49, 80 WWhite, with SA-Ag specular reflector, very wide-angle light distribution 07650 R/35 59 262 00 Reflector R 35, 49, 80 W07650 SB-Ag/35 59 283 00 + Specular reflector SB-Ag 35, 49, 80 WWhite, with SWW-Ag specular reflector, wide-angle light distribution 07650 R/35 59 262 00 Reflector R 35, 49, 80 W07650 SWW/35 59 284 00 + Specular reflector SWW-Ag 35, 49, 80 WReflector accessories, white07690 RK 46 636 00 Reflector end cap 07690 RK PC 46 638 00 Reflector end cap, made of polycarbonate07690 RV 46 640 00 Reflector connector 07690 RV PC 46 642 00 Reflector connector, made of polycarbonateSilver-grey, with SA-Ag specular reflector, asymmetrical 07650 M-R/35 59 264 00 Reflector M-R 35, 49, 80 W07650 SA-Ag/35 59 282 00 + Specular reflector SA-Ag 35, 49, 80 WSilver-grey, with SB-Ag specular reflector, very wide-angle light distribution 07650 M-R/35 59 264 00 Reflector M-R 35, 49, 80 W07650 SB-Ag/35 59 283 00 + Specular reflector SB-Ag 35, 49, 80 WSilver-grey, with SWW-Ag specular reflector, wide-angle light distribution 07650 M-R/35 59 264 00 Reflector M-R 35, 49, 80 W07650 SWW/35 59 284 00 + Specular reflector SWW-Ag 35, 49, 80 WReflector accessories, silver-grey07690 M-RK 46 646 00 Reflector end cap 07690 M-RK PC 46 648 00 Reflector end cap, made of polycarbonate07690 M-RV 46 650 00 Reflector connector 07690 M-RV PC 46 652 00 Reflector connector, made of polycarbonatePlease order trunking and gear trays separately.




Specular reflector SA-AgEnergy-efficient reflectors, highly-specular, with reflection-intensifying silver surface, reflectance value > 98 %, for asymmetrical luminous intensity distribution. Can be inserted in reflector 07650···R without tools.

Specular reflector SB-AgEnergy-efficient reflectors, highly-specular, with reflection-intensifying silver surface, reflectance value > 98 %, for wide luminous intensity distribution. Can be inserted in reflector 07650···R without tools.

Specular reflector SWW-AgEnergy-efficient reflector, highly-specular, with reflection-intensifying silver surface, reflectance value > 98 %, with double wall-washer characteristic, especially for the illumination of facing vertical surfaces e.g. shelves for goods. Can be inserted in reflector 07650···R without tools.


137

C0- C180

07650 R··· + 07650 SA··· + 07650 RW···

07650 R··· + 07650 RW··· + 07650 S··· 07650 M-R··· + 07650 M-RW··· + 07650 S···





Lamella louvre M-RWSheet steel, silver-grey. Can be hooked into reflector for simple maintenance.

Specular reflector SA-AgEnergy-efficient reflectors, highly-specular, with reflection-intensifying silver surface, reflectance value > 98 %, for asymmetrical luminous intensity distribution. Can be inserted in reflector 07650···R without tools.


Circular reflector R with specular reflector SA-Ag and lamella reflector RW

7651 R+SA+RW/49UTE: 0.81 DDIN 5040: A40CIBSE: BZ 3NBN L 14-002: BZ 4


Designation TOC Component For gear tray, designation 1- or 2-lampWhite 07650 R/35 59 262 00 Reflector R 35, 49, 80 W07650 RW/35 59 276 00 + Lamella louvre RW 35, 49, 80 W07650 SA-Ag/35 59 282 00 + Specular reflector SA-Ag, asymmetrical 35, 49, 80 WReflector accessories07690 RK 46 636 00 Reflector end cap 07690 RK PC 46 638 00 Reflector end cap, made of polycarbonate07690 RV 46 640 00 Reflector connector 07690 RV PC 46 642 00 Reflector connector, made of polycarbonateSilver-grey 07650 M-R/35 59 264 00 Reflector M-R 35, 49, 80 W07650 M-RW/35 59 278 00 + Lamella louvre M-RW 35, 49, 80 W07650 SA-Ag/35 59 282 00 + Specular reflector SA-Ag, asymmetrical 35, 49, 80 WReflector accessories07690 M-RK 46 646 00 Reflector end cap 07690 M-RK PC 46 648 00 Reflector end cap, made of polycarbonate07690 M-RV 46 650 00 Reflector connector 07690 M-RV PC 46 652 00 Reflector connector, made of polycarbonatePlease order trunking and gear trays separately.

138

C0- C180

117

103

117

103

07650 G··· 07650 M-G···

07650 G···

E-Line T5NPerforated circular reflector G

ApplicationWorkshops, precision assembly, sales areas, superstores, training rooms.

Reflector GCircular reflector, sheet steel, galvanised, with white polyester coating. With defined, ceiling-sided perforated section for homoge-neous ceiling illumination. Indirect output approx. 9 %. Fastening to gear tray with tool-free stainless steel snap fasteners.

Reflector M-GCircular reflector, sheet steel, galvanised, with polyester coating, silver-grey outer, white coated inner. With defined, ceiling-sided perforated section for homogeneous ceiling illumination. Indirect output approx. 9 %. Fastening to gear tray with tool-free stainless steel snap fasteners.


6 5 4 d a IP20 0.2 joules 650 °C with PC accessories 850 °C

7651 G/49 UTE: 0.81 E + 0.07 TDIN 5040: A40CIBSE: BZ 4NBN L 14-002: BZ 5

Designation TOC Component For gear tray, designation 1- or 2-lampWhite 07650 G/28 59 257 00 Reflector G, perforated 28, 54 W07650 G/35 59 258 00 Reflector G, perforated 35, 49, 80 WReflector accessories07690 RK 46 636 00 Reflector end cap 07690 RK PC 46 638 00 Reflector end cap, made of polycarbonate07690 RV 46 640 00 Reflector connector 07690 RV PC 46 642 00 Reflector connector, made of polycarbonateSilver-grey 07650 M-G/28 59 259 00 Reflector M-G, perforated 28, 54 W07650 M-G/35 59 260 00 Reflector M-G, perforated 35, 49, 80 WReflector accessories07690 M-RK 46 646 00 Reflector end cap 07690 M-RK PC 46 648 00 Reflector end cap, made of polycarbonate07690 M-RV 46 650 00 Reflector connector 07690 M-RV PC 46 652 00 Reflector connector, made of polycarbonatePlease order trunking and gear trays separately.

139

C0- C180

117

113

117

113

07650 G··· + 07650 RW··· 07650 G··· + 07650 RW···

07650 G··· + 07650 RW···

ApplicationWorkshops, precision assembly, sales areas, superstores, training rooms.

Reflector GCircular reflector, sheet steel, galvanised, with white polyester coating. With defined, ceiling-sided perforated section for homoge-neous ceiling illumination. Indirect output approx. 9 %. Fastening to gear tray with tool-free stainless steel snap fasteners.


Reflector M-GCircular reflector, sheet steel, galvanised, with polyester coating, silver-grey outer, white coated inner. With defined, ceiling-sided perforated section for homogeneous ceiling illumination. Indirect output approx. 9 %. Fastening to gear tray with tool-free stainless steel snap fasteners.

Lamella louvre M-RWSheet steel, silver grey. Can be hooked into reflector for simple maintenance.


7651 G-RW/49 UTE: 0.73 E + 0.08 TDIN 5040: A40CIBSE: BZ 3/2/BZ 4NBN L 14-002: BZ 4

Perforated circular reflector G and lamella louvre RWGear tray ··································132Gear tray for emergency lighting ··················148Trunking and wiring ·················150Accessories ······························155Mounting and planning ············157Suspension accessories ··········158Node mounting ························159Lamp data ································193

Designation TOC Component For gear tray, designation 1- or 2-lampWhite 07650 G/28 59 257 00 Reflector G, perforated 07650 RW/28 59 275 00 + Lamella louvre RW 28, 54 W07650 G/35 59 258 00 Reflector G, perforated 07650 RW/35 59 276 00 + Lamella louvre RW 35, 49, 80 WReflector accessories07690 RK 46 636 00 Reflector end cap 07690 RK-PC 46 638 00 Reflector end cap, made of polycarbonate07690 RV 46 640 00 Reflector connector 07690 RV-PC 46 642 00 Reflector connector, made of polycarbonateSilver-grey 07650 M-G/28 59 259 00 Reflector M-G, perforated 07650 M-RW/28 59 277 00 + Lamella louvre M-RW 28, 54 W07650 M-G/35 59 260 00 Reflector M-G, perforated 07650 M-RW/35 59 278 00 + Lamella louvre M-RW 35, 49, 80 WReflector accessories07690 M-RK 46 646 00 Reflector end cap 07690 M-RK PC 46 648 00 Reflector end cap, made of polycarbonate07690 M-RV 46 650 00 Reflector connector 07690 M-RV PC 46 652 00 Reflector connector, made of polycarbonatePlease order trunking and gear trays separately.

140

C0- C180 C0- C180

117

122

117

122

07650 RH/35 + 07650 RSX-Ag/35 07650 M-RH/35 + 07650 RSX-Ag/35

07650 RH··· + 07650 RMV/RSX···

E-Line T5NHigh reflector RH and parabolic louvre RSX-Ag and RMV

ApplicationManufacturing locations, control rooms, offic-es, precision assembly, precision engineering, training rooms, labs, showrooms, sales areas, and especially VDU workstations.

Reflector RHCircular reflector, sheet steel, galvanised, with white polyester coating. High construction height. Fastening to gear tray with tool-free stainless steel snap fasteners.

Reflector M-RHCircular reflector, sheet steel, galvanised, with polyester coating, silver-grey outer, white coat-ed inner. High construction height. Fastening to gear tray with tool-free stainless steel snap fasteners.

Parabolic louvre RSX-AgEnergy-efficient parabolic louvre, semi-specu-lar, with reflection-intensifying silver surface, reflectance value > 98 %, suitable for VDU workstations in accordance with EN 12464-1 via reduced luminance L ≤ 1000 cd/m² for distribution characteristics above 65° all round. Can be hooked into reflector for simple maintenance.

Parabolic louvre RMVOf 99.98 % high-purity post-anodised alumini-um, matt anodised. Suitable for VDU work-stations according to EN 12464-1 via reduced luminance L ≤ 1000 cd/m2 for distribution char-acteristics above 65° all-round. Can be hooked into reflector for simple maintenance.



7651 RSX-Ag/49UTE: 0.89 B + 0.00 T DIN 5040: A50 CIBSE: BZ 2 NBN L 14-002: BZ 2/1.5/BZ 1/4/BZ 2

7651 RMV/49 UTE: 0.60 BDIN 5040: A50CIBSE: BZ 2NBN: BZ 2/1.25/BZ 1

Designation TOC Component For gear tray, designation 1- or 2-lampWhite 07650 RH/35 59 266 00 Reflector RH, high construction 07650 RSX-Ag/35 59 281 00 + Specular louvre RAX-Ag, semi-specular 35, 49, 80 W07650 RMV/35 59 279 00 + Specular louvre RMV, matt 35, 49, 80 WReflector accessories07690 RKH 46 635 00 Reflector end cap 07690 RKH PC 46 637 00 Reflector end cap, made of polycarbonate07690 RVH 46 639 00 Reflector connector 07690 RVH PC 46 641 00 Reflector connector, made of polycarbonateSilver-grey 07650 M-RH/35 59 268 00 Reflector RH, high construction 07650 RSX-Ag/35 59 281 00 + Specular louvre RAX-Ag, semi-specular 35, 49, 80 W07650 RMV/35 59 279 00 + Specular louvre RMV, matt 35, 49, 80 WReflector accessories07690 M-RKH 46 645 00 Reflector end cap 07690 M-RKH PC 46 647 00 Reflector end cap, made of polycarbonate07690 M-RVH 46 649 00 Reflector connector 07690 M-RVH PC 46 651 00 Reflector connector, made of polycarbonatePlease order trunking and gear trays separately.

141

C0- C180

117

122

117

122

07650 RH/35 + 07650 RPX-Ag/35 07650 M-RH/35 + 07650 RPX-Ag/35

07650 RH··· + 07650 RPX···

High reflector RH and parabolic louvre RPX-Ag

ApplicationManufacturing locations, control rooms, offic-es, precision assembly, precision engineering, training rooms, labs, showrooms, sales areas, and especially VDU workstations.

Reflector RHCircular reflector, sheet steel, galvanised, with white polyester coating. High construction. Fastening to gear tray with tool-free stainless steel snap fasteners.

Reflector M-RHCircular reflector, sheet steel, galvanised, with polyester coating, silver-grey outer, white coated inner. High construction. Fastening to gear tray with tool-free stainless steel snap fasteners.

Parabolic louvre RPX-AgEnergy-efficient parabolic louvre, highly-spec-ular, with reflection-intensifying silver surface, reflectance value > 98 %, suitable for VDU workstations in accordance with EN 12464-1 via reduced luminance L ≤ 1000 cd/m² for distribution characteristics above 65° all round. Can be hooked into reflector for simple maintenance.


7651 RPX-Ag/49UTE: 0.89 B + 0.00 T DIN 5040: A50 CIBSE: BZ 2 NBN L 14-002: BZ 2/1.5/BZ 1/4/BZ 2


Designation TOC Component For gear tray, designation 1- or 2-lampWhite 07650 RH/35 59 266 00 Reflector RH, high construction 07650 RPX-Ag/35 59 280 00 + Specular louvre RPX-Ag, highly-specular 35, 49, 80 WReflector accessories07690 RKH 46 635 00 Reflector end cap 07690 RKH PC 46 637 00 Reflector end cap, made of polycarbonate07690 RVH 46 639 00 Reflector connector 07690 RVH PC 46 641 00 Reflector connector, made of polycarbonateSilver-grey 07650 M-RH/35 59 268 00 Reflector RH, high construction 07650 RPX-Ag/35 59 280 00 + Specular louvre RPX-Ag, highly-specular 35, 49, 80 WReflector accessories07690 M-RKH 46 645 00 Reflector end cap 07690 M-RKH PC 46 647 00 Reflector end cap, made of polycarbonate07690 M-RVH 46 649 00 Reflector connector 07690 M-RVH PC 46 651 00 Reflector connector, made of polycarbonatePlease order trunking and gear trays separately.

142

C0- C180 C0- C180 C0- C180 C0- C180

147

110

151

142

110

151

142142

109

142

147

07650 SBF···07650 SDAF···07650 SDAFG···

07650 STF··· 07650 SAF···

07650 STF/35 07650 SAF/35

E-Line T5NSelf-suspended reflectors SBF, STF, SAF or SDAF/SDAFG

ApplicationManufacturing facilities, workshops, assembly halls.SA··· Advantageous for wall and shelf lighting.SDAF, SDAFG··· Advantageous for super-markets.

Self-suspended specular reflector SBFWith highly efficient silver optics, for wide- angle luminous intensity distribution. Specular reflector with reflection-intensifying silver surface, reflectance value > 98 %. For direct mounting to gear tray.

Self-suspended specular reflector STFWith highly efficient silver optics, for narrow luminous intensity distribution. Specular reflector with reflection-intensifying silver surface, reflectance value > 98 %. For direct mounting to gear tray.

Self-suspended specular reflector SAFWith highly efficient silver optics, for asym-metrical luminous intensity distribution. Specular reflector with reflection-intensifying silver surface, reflectance value > 98 %. For direct mounting to gear tray.

Self-suspended specular reflector SDAFWith highly efficient silver optics, for double asymmetrical luminous intensity distribution. Specular reflector with reflection-intensifying silver surface, reflectance value > 98 %. For direct mounting to gear tray.

Self-suspended specular reflector SDAFGWith highly efficient silver optics, for double asymmetrical luminous intensity distribution, with defined, ceiling-sided perforated section for homogeneous ceiling illumination, indirect output approx. 9%. Specular reflector with reflection-intensifying silver surface, reflect-ance value > 98 %. For direct mounting to gear tray.


7651 SBF/1x35UTE: 0.98 DDIN 5040: A40CIBSE: BZ 5/1.25/BZ 4NBN 14-002: BZ 4

7651 SAF/80UTE: 1.01 D + 0.00 TDIN 5040: A40 CIBSE: BZ 5 NBN L 14-002: BZ 4

7651 STF/80UTE: 1.01 D + 0.00 TDIN 5040: A50 CIBSE: BZ 2 NBN L 14-002: BZ 3

7651 SDAF/1x35UTE: 0.96 DDIN 5040: A40CIBSE: BZ 5/1.25/BZ 4NBN 14-002: BZ 4/1/BZ 3

Designation TOC Component For gear tray, designation 1- or 2-lamp 07650 SBF/35 59 272 00 Specular reflector SBF, wide-angle light distribution 35, 49, 80 W07650 STF/35 59 273 00 Specular reflector STF, narrow-angle light distribution 35, 49, 80 W07650 SAF/35 59 271 00 Specular reflector SAF, asymmetrical 35, 49, 80 W07650 SDAF/35 59 296 00 Specular reflector SDAF, double asymmetrical 35, 49, 80 W07650 SDAFG/35 59 295 00 Specular reflector SDAFG, double asymmetrical, perf. 35, 49, 80 W

143

C0- C180

185

122

185

122

07650 HRF···

07650 HRF/35

Self-suspended reflector HRFWith highly efficient silver optics, for extremely narrow luminous intensity distribution. Specu-lar reflector with reflection-intensifying silver surface, reflectance value > 98 %. For direct mounting to gear tray.

Lighting of highbay rackingThe lighting of highbay racking is largely per-manent lighting with artificial sources due to missing or insufficient daylight. In most cases high operating periods result, and because of this only lamps with high luminous efficiency and economic luminaires should be used. Gear trays with electronic control gears are advan-tageous for low energy consumption and high lamp service life. E-Line HRF versions feature extremely narrow light distribution together with high light output ratios. Illuminance values according to standards are therefore efficiently achieved even with high luminaire mounting heights.

Especially suitable for high halls and highbay rackingSelf-suspended specular reflector HRF

7651 HRF/49 UTE: 1.02 C + 0.00 TDIN 5040: A50 CIBSE: BZ 3 NBN L 14-002: BZ 2

Gear t rays ·································132Gear tray for emergency lighting ··················148Trunking and wiring ·················150Accessories ······························155Mounting and planning ············157Suspension accessories ··········158Node mounting ························159Lamp data ································193

Diagrams to determine horizontal illuminances

Installation dataGangway length: L=25 mGangway width: BLight point height: hTransverse coordinate: xLongitudinal coordinate: yEvaluation level: floor

Luminaires:Non-interrupted continuous line with 16 units7651/35/49/80 E + 07650 HRF/35

Lamps:T5 80 W lamps

Luminous flux:¢LP = 6150 lmMaintenance factor: MF = 0.8

Illustration 3Illuminance distributionE◊ across the gangway, y=12.5 m

Illustration 2Average illuminance B/2 on the centre lineB= ...: on the whole gangway surface

Illustration 1Installation sketchGangway in high-bay warehouse

Light point height hin m

Aver

age

illum

inan

ce

in lx

Poin

t illu

min

ance

EP

in lx

Lat. distance x to gangway centre

L

B

yx

B/2

h

e

500

400

300

200

100

0

5020

B/2

4 8 12 16 20 24 28

B = 3 m

B = 6 m

500

400

300

200

100

0

50

0 1 m 2 m 3 m

450

350

250

150

h=30 mh=22m

h=14m

h=6m

Designation TOC Component For gear tray, designation 1- or 2-lamp 07650 HRF/35 59 274 00 Specular reflector HRF, narrow-angle light distribution 35, 49, 80 WPlease order trunking and gear trays separately. End caps and connectors are not required.

144

C0- C180

7654 HR···

7654 HR···

134

206

ApplicationE-Line individual luminaire with self-suspend-ed energy-efficient specular reflector for narrow/wide-angle luminous intensity distri-bution, for use as high bay luminaire and for increasing general lighting for special visual tasks.

Gear tray with integral specular reflectorGear tray made of sheet steel, white. Fasten-ing to trunking with tool-free stainless steel snap fasteners.Self-suspended specular reflector (···HR···) with highly efficient silver optics, for narrow/wide-angle luminous intensity distribution. Specular reflector with reflection-intensifying silver surface, reflectance value > 98 %. For direct mounting to gear tray.

Electrical connectionInstant connection with insertion of gear tray into the trunking. Lamp circuit connections can be set without tools to the conductor.

Electrical version···E With electronic multi-lamp control gear.···EDD With dimmable electronic multi-lamp control gear (DALI).

E-Line T5NEspecially suitable for high halls and highbay rackingSelf-suspended specular reflector HR, 4-lamp

6 5 4 d a IP20 0.2 joules 850 °C

Designation TOC ···E ···EDD For 4-lamp configuration

7654 HR/35/49/80··· 59 202··· ···04 ···07 35, 49, 80 WGear tray only supplied together with reflector HR4.

7654 HR/80UTE: 0.94 D + 0.02 T DIN 5040: A50CIBSE: BZ 2NBN 14-002: BZ 3

145

C0- C180

07650 T···

07650 T···

104

118

104

118


Trapezoid reflector TTrapezoid reflector, sheet steel, white, with highly reflective powder coating for maximum luminaire light output ratios. Fastening to gear tray with tool-free stainless steel snap fasteners.


E-Line T5NTrapezoid reflector T

6 5 4 d a IP20 0.2 joules 850 °C

7651 T/35UTE: 0.97 F DIN 5040: A40CIBSE: BZ 4NBN 14-002: BZ 5/1.25/BZ 4

Designation TOC Component For gear tray, designation 1- or 2-lamp

07650 T/28 59 269 00 Reflector T, trapezoid 28, 54 W07650 T/35 59 270 00 Reflector T, trapezoid 35, 49, 80 WReflector accessories07650 RVT PC 59 691 00 Reflector connector RVT, made of polycarbonate


146

C0- C180

C0- C180

63

103

63

103

07651 M-STB/35 07651 M-UXP-H/35

07651 M-STB··· 07651 M-UXP-H···

E-Line T5NRectangular reflectors with specular optics M-STB or filigree specular louvre M-UXP-H

ApplicationManufacturing locations, control rooms, offic-es, precision assembly, precision engineering, training rooms, labs, showrooms, sales areas. Ultra-low cross-section louvre ···UXP-H suit-able for VDU workstations.

Rectangular reflector with specular optics M-STBRectangular reflector, sheet steel, galvanised, silver-grey. Fastening to gear tray with tool-free stainless steel snap fasteners. With integral specular reflector for narrow/wide- angle lumi-nous intensity distribution, made of 99.99 % high-purity post-anodised aluminium, highly-specular, reflection-intensifying surface.

Rectangular reflector with ultra-low cross-section louvre M-UXP-HRectangular reflector, sheet steel, galvanised, silver-grey. Fastening to gear tray with tool-free stainless steel snap fasteners. With integral ultra-low cross-section louvre with UXP-Technology®, highly-specular, reflectance value 98 %, stray light output ≤ 3 %. For VDU workstations according to EN 12464-1 via reduced luminance L ≤ 1000 cd/m2 for distri-bution characteristics above 65° all round.

6 5 4 d a IP20 0.2 joules 650 °C with PC accessories 850 °C ···UXP

7651 M-STB/49UTE: 0.88 D + 0.00 T DIN 5040: A40 CIBSE: BZ 3 NBN L 14-002: BZ 4/.8/BZ 3/1/BZ 4

7651 M-UXP/49UTE: 0.80 B + 0.00 TDIN 5040: A50CIBSE: BZ 1NBN L 14-002: BZ 2/1.25/BZ 1

Designation TOC Component For gear tray, designation 1-lamp 07651 M-STB/35 59 285 00 Reflector with specular optics STB 1 x 35, 49, 80 W07651 M-UXP-H/35 59 286 00 Reflector with filigree specular louvre UXP 1 x 35, 49, 80 WPlease order trunking and gear trays separately.

147

52

63 800 / 35 W

7650 M-AD···

07651 AD/M-AD···

ApplicationFor accent lighting. For accommodation of spotlights in sales areas, showrooms, museums, reception halls, conference rooms and trade fair halls.

3-circuit track module ADSheet steel, white, with integrated 3-circuit track for euro adapter, usable track length 800 mm. Fastening to trunking with tool-free stainless steel snap fasteners. Maximum total weight of spotlights fixed to track module: 10 kg.···M··· Silver-grey.

Electrical connectionInstant connection with insertion of gear tray into the trunking. Lamp circuit connections can be set without tools to the conductor.

3-circuit track module

Designation TOC Component Length designationWhite mm7650 AD-35 59 191 00 3-circuit track module AD 1475Silver-grey 7650 M-AD-35 59 192 00 3-circuit track module M-AD 1475The spotlights shown are not in scope of supply. Please order trunking and gear trays separately.


148

03

6

036

03

6

036 03

6

03

6

0 3 6

Eh=0.5 lx

5 lx

1 lx5 lx

1 lx

Eh=0.5 lx

C Dm

A B

1 lx5 lx

1 lx

Eh=0.5 lxEh=0.5 lx

m

5 lx0 3 6

7651···EB / 7652···EB

E-Line T5NGear tray for emergency lighting

A 7651/35 E+EB(3h) battenB 7651/35 E+EB(3h) in combination with reflector RC 7652/35 E+EB(3h) battenD 7652/35 E+EB(3h) in combination with reflector R Suspension length 3 m Suspension length 5 m

6 5 4 d a IP20 0.2 joules 850 °C

Gear tray for emergency lighting Gear tray ··· + EBGear tray for continuous lines and individual luminaires, version with individual battery, protection rating IP20.

Sheet steel, white. Fastening to trunking with tool-free stainless steel snap fasteners. With electronic control gear ECG for operation of general lighting.···M··· Silver-grey.

Fluorescent lamps in permanent operation, continued operation in event of mains failure via maintenance-free individual battery, LED for display of charging condition. ···+EB (1h) Nominal operating time 1 hour.···+EB (3h) Nominal operating time 3 hours.

Electrical connectionConnection with general lighting and charging circuit is connected with insertion of gear tray into the trunking. Lamp circuit connections can be set without tools to the conductor.

Gear tray with individual battery supply for permanent operation

Designation TOC Operating Lamps L ≈kg duration White W mm 7651/35/49 E+EB (1h) 59 287 04 1 hrs. 1 x 35, 49 1475 1.97652/35/49 E+EB (1h) 59 289 04 1 hrs. 2 x 35, 49 1475 2.07651/35/49 E+EB (3h) 59 288 04 3 hrs. 1 x 35, 49 1475 2.47652/35/49 E+EB (3h) 59 290 04 3 hrs. 2 x 35, 49 1475 2.4Silver-grey 7651 M/35/49 E+EB (1h) 59 291 04 1 hrs. 1 x 35, 49 1475 1.97652 M/35/49 E+EB (1h) 59 293 04 1 hrs. 2 x 35, 49 1475 2.07651 M/35/49 E+EB (3h) 59 292 04 3 hrs. 1 x 35, 49 1475 2.47652 M/35/49 E+EB (3h) 59 294 04 3 hrs. 2 x 35, 49 1475 2.4

149

Gear tray ··································132Trunking and wiring ·················150Accessories ······························155Mounting and planning ············157Suspension accessories ··········158Node mounting ························159Lamp data ································193

150

E-Line T5NTrunking and wiring options

Single-length trunking, prewiredfor individual luminaires.

Trunking, prewiredfor modular system.

Trunking

Individual luminaires, trunking prewiredThe possibility to combine gear trays, reflectors and equipment accessories to diverse individual luminaires.

Modular system, trunking prewiredThe quickest way to install continuous lines with modular luminaire distances.

Modular system, trunking unwiredThe possibility to install continuous lines with modular luminaire distances via on-site wiring of the trunking.

Variable system, trunking unwiredThe possibility to install continuous lines with random, variable luminaire distances via on-site wiring of the trunking.

Accessories for unwired trunking

Trunking, unwiredFor modular system for through-wiring with integral connector sockets according to module size, or for variable system for ribbon cables or individual cables and with variable connector socket positions.

151

1475/35W

1175/28W1475/35W

1175/28W1475/35W

N x 1175N x 1475

1175/28W1475/35W

1175/28W1475/35W

N x 1175N x 1475

Individual luminaires with 1475 mm gear trays and single-length t runking 07650/I/58 /7 LV/E.

Continuous lines with 1175 mm or 1475 mm gear trays at modular distances. Trunking with prewiring.

Continuous lines with 1175 mm or 1475 mm gear trays with freely specifiable distances. Trunking wired on-site.

Examples for individual luminaires and continuous line configurations

For E-Line trunking, both 5-conductor wiring and 7-conductor wiring is available. These are advantageous e. g. with 3-circuit network connection and simultaneous operation of dimmable or emergency light gear trays.

Continuous lines with 1175 mm or 1475 mm gear trays at modular distances. Trunking wired on-site.

Gear tray ··································132Gear tray for emergency lighting ··················148Accessories ······························155Mounting and planning ············157Suspension accessories ··········158Node mounting ························159Lamp data ································193

1175/28W1475/35W variable variable1175/28W

1475/35W1175/28W1475/35W

152

41 220 165

E

63

N x 1175N x 1475

1175/28W1475/35W

07650···U

E-Line T5NUniversal trunking

Trunking, unwiredTrunking 07650/···-U is the basis of the variable system for continuous lines with freely specifiable length distances between the luminaire inserts. Connector sockets are connected at random positions on-site with ribbon cables via cutting or with individual cables via plug connections.

Another possibility for on-site continuous line wiring is the use of 5 or 7-core wiring equipped at modular distances of 1175 mm or 1475 mm with connector sockets. In this way corresponding modular blank distances of any number can be rapidly implemented. See page 156 for through-wiring and wiring accessories.

Trunking versionsThe basis of the E-Line rapid-mounting sys-tem is inherently stable trunking in which gear trays with IP20 protection can be integrated. 2- and 3-length trunking equipped with robust couplings as standard form the basis for E-Line continuous lines. 1-length versions are primarily intended for combining to individual luminaires, but can also be used for subse-quent lengthening of E-line continuous lines.

Trunking 07650/···-USheet steel, galvanised, with white polyester coating, unwired. The trunking is simply wired on-site. See page 156 for through-wiring and accessories. ···M··· Silver-grey.

Luminaire arrangements with trunking with on-site wiringContinuous lines with 1175 mm or 1475 mm gear trays for un-interrupted or interrupted continu-ous lines. Modular wiring system according to lamp length.

Continuous lines with 1175 mm or 1475 mm gear trays with freely specifiable distances. Wired on-site with ribbon cable or single wires.

Designation TOCWhite Unwired 07650/I/28-U 59 204 0007650/II/28-U 59 208 0007650/III/28-U 59 212 0007650/I/35-U 59 206 0007650/II/35-U 59 210 0007650/III/35-U 59 214 00

Designation TOC Length ≈kgSilver-grey Unwired mm 07650 M/I/28-U 59 235 00 1175 1.307650 M/II/28-U 59 239 00 2350 2.307650 M/III/28-U 59 243 00 3525 3.507650 M/I/35-U 59 237 00 1475 1.607650 M/II/35-U 59 241 00 2950 2.907650 M/III/35-U 59 245 00 4425 4.4

1175/28W1475/35W variable 1175/28W

1475/35W

153

2204141

63 63

165

E

1175/28W1475/35W

1175/28W1475/35W

N x 1175N x 1475

1175/28W1475/35W

07650···LV···

Trunking, prewiredTrunking 07650/···/5LV, 07650/···/7LV for uninterrupted continuous lines or continuous lines with blanking covers in lamp lengths is prewired and equipped with one female connector per lamp length for tool-free elec-trical connection with the gear tray. Either 5-conductor through-wiring or 7-conductor wiring for expanded electrical continuous line equipping are available.

Continuous line arrangements with 5-conductor or 7-conductor through-wiring Possible electrical continuous line arrange-ments are specified with the required trunking wiring in the table below.

Trunking 07650/···5LV, ···7LVSheet steel, galvanised, with white polyester coating, completely prewired with heat-resistant 2.5 mm² single wires, each with a 5 or 7-pole female connector per lamp length. ···M··· Silver-grey.

Luminaire arrangements with prewired trunkingUninterrupted or interrupted continuous lines in modular distances with 1175 mm or 1475 mm gear trays. Trunking with complete prewiring.

Designation TOCWhite Wired Wire section 5 x 2,5 mm2

07650/II/28-5LV-2,5 59 217 0007650/III/28-5LV-2,5 59 219 0007650/II/35-5LV-2,5 59 218 0007650/III/35-5LV-2,5 59 220 00Wire section 7 x 2,5 mm2

07650/II/28-7LV-2,5 59 207 0007650/III/28-7LV-2,5 59 211 0007650/II/35-7LV-2,5 59 209 0007650/III/35-7LV-2,5 59 213 00

Designation TOC Length Connec- ≈kgSilver-grey tor socket Wired mm distances Wire section 5 x 2,5 mm2 07650 M/II/28-5LV-2,5 59 248 00 2350 1175 3.007650 M/III/28-5LV-2,5 59 250 00 3525 1175 4.507650 M/II/35-5LV-2,5 59 249 00 2950 1475 3.307650 M/III/35-5LV-2,5 59 251 00 4425 1475 5.0Wire section 7 x 2,5 mm2 07650 M/II/28-7LV-2,5 59 238 00 2350 1175 3.107650 M/III/28-7LV-2,5 59 242 00 3525 1175 4.607650 M/II/35-7LV-2,5 59 240 00 2950 1475 3.407650 M/III/35-7LV-2,5 59 244 00 4425 1475 5.1

5

5

5

5

5

Mai

ns c

able

5 L

V

2

2

2

2

2

Dim

min

g ED

D

Emer

genc

y lig

ht s

yste

ms

1

1

1

EB –

indi

vidu

al b

atte

ry

7

7

7

6

7

7

6

55

5

5

43

Num

ber

of w

ires

7LV

5LV

Wir

ing

met

hod

Gear t rays ·································132Gear tray for emergency lighting ··················148Accessories ······························155Mounting and planning ············157Suspension accessories ··········158Node mounting ························159Lamp data ································193

154

41 220 165

E

63

1180/28 W, 54 W

1480/35 W, 49 W, 80 W

07650···/I/···

E-Line T5NUniversal trunking for individual luminaires

Trunking for individual luminaires, prewired and ready for connectionE-Line individual luminaires are suitable for the individual lighting of workstations or for the lighting of small, enclosed room zones.

Trunking 07650/I/···/E (···2,5) is the basis for individual luminaires. They are equipped as standard with a 5-pole or 7-pole female con-nector and 7-core through-wiring. Connectors or plugs terminate the ends with protection against accidental contact and enable electrical connection as well as rapid access to the through-wiring of existing E-line continuous lines when these are lengthened.

For individual luminaires, all E-Line gear trays and reflectors as well as corresponding photometric accessories can be used.

Trunking 07650/I/···/E (···2.5)Sheet steel, galvanised, with white polyester coating, completely prewired with heat-resistant single wires, 7-core, and 7-pole female connector. ···M··· Silver-grey.

Examples for individual luminairesIndividual luminaire with 1-length trunking 07650/I/36-7LV/1,5/E and 1175 mm gear tray.

Individual luminaire with 1-length trunking 07650/I/58-7LV/2.5/E and 1475 mm gear tray.


Designation TOCWhite Wired Wire section 5 x 2,5 mm2

07650/I/28-5LV/E-2,5 59 215 00 07650/I/35-5LV/E-2,5 59 216 00 Wire section 7 x 2,5 mm2

07650/I/28-7LV/E-2,5 59 203 0007650/I/35-7LV/E-2,5 59 205 00

Designation TOC Length ≈kgSilver-grey Wired mm Wire section 7 x 2,5 mm2 07650 M/I/28-5LV/E-2,5 59 246 00 1175 1.307650 M/I/35-5LV/E-2,5 59 247 00 1475 1.7 Wire section 7 x 2,5 mm2 07650 M/I/28-7LV/E-2,5 59 234 00 1175 1.407650 M/I/35-7LV/E-2,5 59 236 00 1475 1.8

155

Trunking accessoriesE-Line T5N

Blanking covers IP201 piece, for 07650··· trunking, plastic profile (PVC), white, can be simply cut to suit on-site. For IP20 protection rating.···M··· Silver-grey.···PC made of polycarbonate.

Trunking end caps IP201 piece, for 07650··· trunking, plastic, white, with 2 knockouts. Can be clipped in without tools. For IP20 protection rating.2 trunking end caps required per continuous line.···M··· Silver-grey.···PC made of polycarbonate.

Cable restraint1 piece, for suspended trunking 07650···. Stainless steel, for max. 4 sheathed cables, 5 x 2.5 mm², can be clipped to trunking.

IP20

White TOC 07690 E-R 21 947 00 07690 E-R PC 21 948 00 For trapezoid reflectors07690 E-T 21 949 00 07690 E-T PC 21 950 00

Silver-grey TOC 07690 M-E-R 43 742 00 07690 M-E-R PC 43 743 00

For IP20 and IP50 TOC 07690 LHA 21 952 00

White TOC1175 mm 07650 B/28 59 226 0007650 B/28 PC 59 227 001475 mm 07650 B/35 59 228 0007650 B/35 PC 59 229 00

Silver-grey TOC1175 mm 07650 M-B/28 59 230 0007650 M-B/28 PC 59 231 001475 mm 07650 M-B/35 59 232 0007650 M-B/35 PC 59 233 00

156

E-Line T5NVariable system

Variable systemUnwired E-Line trunking can be simply equipped on site with through-wiring for variable gear tray arrangements.

Two possibilities exist for the variable s ystem:• Variable system with ribbon

cable.• Variable system with individual

conductors.

The variable wiring systems offer maximum flexibility with position-ing of the gear trays along the continuous line. Here the female connectors are contacted on-site with the wiring at any position in the unwired trunking: with the ribbon cable via the cutting contact method (connectors are pressed on with flat nose pliers) and with single wire through- wiring via conventional plug connections.

Through-wiring for on-site wiring of unwired trunk-ing with variable gear tray distances. Consisting of 1,5 mm² ribbon cable, with colour-coded earthing conductor, including cable retainers for fixing in the trunking.

07690/5LV/46m: 5-core, 46 m long, for freely definable female connector distances.07690/7LV/46m: 7-core, 46 m long, for freely definable female connector distances.

Female connector7-pole, for electrical contact of ribbon cables 07690/5LV/46 m and 07690/7LV/46 m.

Wire connector7-pole plug-socket pair for termination of through-wiring with protection against accidental contact. Socket suitable for mains connection. Required addi-tionally for the connection of through-wiring sections or with mains connection during the course of through-wiring.

Wiring connectorPlug socket pair for mains connection and for tool-free integration of trunking into the earthing.

Earthed feedingAll through-wiring must be termi-nated at the ends with protection against accidental contact via the 07690 VV wiring connector. Mains connection is via the socket. This is clipped onto a metal tongue at the start of the trunking and thus incorporates complete trunking into the earthing without tools.

Female connector5-pole, for electrical contact of individual wires on-site.

Inner cable restraint (not shown)10 pieces, for approx. 4.5 m trunking length, plastic, for max. 25 individual wires, 2.5 mm², can be clipped into trunking.

Ribbon cable wiring for 07690 SK female connectors, luminaire distances freely defined

Individual conductor wiring for 07690 TO female connectors, luminaire distances freely defined

Through-wiring for on-site wiring of unwired trunk-ing with variable gear tray distances. Consisting of 5 colour-coded individual conductors, 1.5 mm².

07690/5LV/25m: 5 coloured, intertwisted, heat- resistant individual wires, 25 m long. For freely definable female connector distances.

07690 SK 21 959 00

07690 VV 21 973 00 07690 VV 21 973 00

07690 TO 21 967 00

07690 LHI 21 953 00

Designation TOC Wire Length section mm2 mWiring 5LV 07690/5LV/25m 21 890 00 1.5 25Please order cable restraint for fixing of single wires in the trunking separately.

Designation TOC Wire Length section mm2 mWiring 5LV 07690/5LV/46m 21 891 00 1,5 46Wiring 7LV 07690/7LV/46m 21 895 00 1,5 46

1175/28W1475/35W

1175/28W1475/35Wvariable 1175/28W

1475/35W1175/28W1475/35Wvariable

157

E-Line T5NPlanning and ordering example

Planning notesfor continuous lines with 1175 mm gear tray.

Planning notesfor continuous lines with 1475 mm gear tray.

Ordering example:Uninterrupted continuous line 28 W with prewired trunking (7-conductor wiring)11.75 m long (correspond-ing to 10 lamp lengths), with 1-lamp dimmable gear trays, reflectors and lamella louvres. Mounting directly to ceiling. IP20 protection rating.

Ordering example:Variable continuous line, silver-grey, 80 W with trunking to be wired on-site (5-conductor wiring) and uniform blanking distances of 1475 mm between gear trays11.80 m long (correspond-ing to 4 lamp lengths), with 2-lamp gear trays, high reflectors and RMV parabolic louvre. Mounting via chain suspen-sion. IP20 protection rating.

Suspension spacingsE-Line enables suspension spacings up to 2500 mm. Reduced spacings according to page 159 exist only for nodes in some cases. Fundamentally, an overhang at the continuous line ends of at least 50 mm to a maximum of 500 mm must be ensured.

All specifications apply to 1- and 2-lamp gear trays and are inde-pendent of ballast type, type of photometric equipment and fixing method. The adjacent quick overviews give specifications about the com-bination of E-Line continuous lines. For various continuous line lengths,• the required number of trunking

units and• the minimum number of fixing

points (based on maximum fixing distance of 2500 mm) have been specified.

Overhang50 mm - 500 mm

Mounting distancemax. 2500 mm

Further mounting distance max. 2500 mm

Contin-uous line length

Lamp length

Trunking 07650··· Fixing points ···/II/28-U ···/III/28-U

···/II/28-5 LV ···/III/28-5 LV ···/II/28-7 LV ···/III/28-7 LV m Number Pieces Pieces Number2,36 2 1 – 23,54 3 – 1 24,72 4 2 – 35,89 5 1 1 37,07 6 – 2 48,25 7 2 1 49,42 8 1 2 510,60 9 – 3 511,77 10 2 2 612,95 11 1 3 614,12 12 – 4 715,30 13 2 3 716,47 14 1 4 817,65 15 – 5 818,80 16 2 4 920,00 17 1 5 921,17 18 – 6 1022,35 19 2 5 1023,52 20 1 6 10

Contin-uous line length

Lamp length

Trunking 07650··· Fixing points ···/II/35-U ···/III/35-U

···/II/35-5 LV ···/III/35-5 LV ···/II/35-7 LV ···/III/35-7 LV m Number Pieces Pieces Number2,96 2 1 – 24,44 3 – 1 35,91 4 2 – 37,39 5 1 1 48,86 6 – 2 510,34 7 2 1 511,81 8 1 2 613,29 9 – 3 714,76 10 2 2 716,24 11 1 3 817,71 12 – 4 819,19 13 2 3 920,66 14 1 4 922,14 15 – 5 1023,61 16 2 4 1125,09 17 1 5 1126,56 18 – 6 1228,04 19 2 5 1229,51 20 1 6 13

1. Trunking Trunking, 2-lengthTrunking, 3-length

2 x 07650/II/28-7LV2 x 07650/ III/28-7LV

2. Trunking accessories and

fixing accessories Trunking end cap Ceiling fixing clamp

2 x 07650 E-R6 x D 01 X

3. Gear tray Gear tray, 1-lamp 10 x 7651/28 ED 4. Reflectors and accessories Reflector, circular

Reflector connectorReflector end cap

10 x 07650 R/289 x 07650 RV2 x 07650 RK

5. Photometric equipment Lamella louvre 10 x 07650 RW/28

1. Trunking Trunking, 2-lengthTrunking, 3-length

1 x 07650 M/II/35-U2 x 07650 M/III/35-U

2. Trunking accessories and

fixing accessories Trunking end cap Blank cover Ribbon cable Wiring connector Female connector Chain suspension

2 x 07650 M-E-R3 x 07650 M-B/35

1 x 07650/5LV/46m1 x 07690 VV6 x 07690 SK

6 x A 01 KX 3. Gear tray Gear tray, 1-lamp 4 x 7651 M/80 4. Reflectors and

accessories Circular reflector Reflector end cap

4 x 07650 M-RH/358 x 07690 M-RKH

5. Photometric

equipmentRMV parabolic louvre 4 x 07650 RMV/35

“TX E-Line” software for configuration of continuous line sThe configurator especially designed for the TRILUX E-Line continuous line rapid mounting system makes planning child’s play: supported by an image preview, only four steps are needed for the perfect configuration. Download via www.trilux.co.uk.

158

A 01 DSX A 01 SX A 01 KXA 01 PX

A01 M-PX

E 06 E 05 NE 04 E 01

E 07 E 03 SX E 03 KX D 01 X

E-Line T5NSuspension accessories for trunking

Decorative wire suspensionConsisting of steel wire, ¶ 1.75 mm, 1500 mm long, and suspension clamp. Wire length adjusted steplessly and without t ools.

Wire accessoriesConsisting of 12 wire eye stiffeners and clamps, for construc-tion of suspension eyelets with crimping pliers (e.g. Klauke K 39 or Cimco BH), cavity size 10 mm. Can be combined with E 06 and E 03 SX.

Link chainGalvanised, 20 m long, can be cut to suit on-site.

Steel wire¶ 1.75 mm, galva-nised, 20 m long, with instant glue for fixing of wire ends. Only with E 07 accessory.

TurnbuckleFor height adjust-ment of chain link length and a rapid chain catch.

Ceiling fixing plateSheet steel, galva-nised, with spring hook to tool-free hooking in of chains, wires, pendants.

Suspension clampFor wire suspensions with E 06 and E 07 accessories. Stainless steel, non-rusting, for tool-free fixing to trunking. Wire length adjusted steplessly and without tools.

Fixing clampwith slotted washer for direct ceiling fixing, for tool-free clipping in of trunking.Distance between trunking and mounting s urface: 9 mm.

Suspension clampFor chain suspen-sions, stainless steel, non-rusting, for tool-free fixing to trunking.

Wire suspensionConsisting of galva-nised steel wire, ¶ 1.75 mm, 1500 mm long, and suspension clamp E 03 SX.Wire length adjusted steplessly and without t ools.

Chain suspensionConsisting of link chain, bright zinc plated, 1500 mm long, with turnbuckle and suspension clamp E 03 KX.

Pendant suspensionConsisting of pendant tube, white, 13 mm, with vernier clip, for tool-free height adjustment to 20 mm, 1500 mm long, and with suspension clamp for tool-free fixing. ···M··· Silver-grey.

The fixing material shown can be universally used for 07650··· trunking together with all E-Line gear trays and corresponding photo-metric equipment components. It can also be used with trunking as mounting rails for TRILUX surface-mounted luminaires.

The maximum mounting spacing for the specified fixing accessories is 2500 mm. With node arrangements, reduced spacing applies, see page 159.

Fixing accessories should be able to support five times the weight of fixed luminaires for safety reasons. With use of maximum spacing, loads of 20 kg per suspension point may occur. All fixing accessories from the E-Line program are therefore designed for at least 100 kg weight loads. Fixing accessories provided on-site such as dowels or ceiling hooks etc. must also adhere to these requirements.

A 01 DSX 22 296 00

E 07 23 438 00

E 04 23 434 00 E 06 23 437 00

E 05 N 23 436 00

E 01 23 420 00

E 03 SX 23 432 00 D 01 X 23 212 00

E 03 KX 23 428 00

A 01 SX 22 307 00 A 01 KX 22 301 00 A 01 PX 29 283 00A 01 M-PX 45 379 00

159

180¶ 110 1475 180 ¶ 110

1475/35W1937

A 03 SA 03 M-S

A 03 PA 03 M-P

A 03 DA 03 M-D

07690 KA/7LV···07690 M-KA/7LV···

05900 AN05000 ZR

Node with wire s uspension1 piece, consisting of: 1 node for up to

4 branchings, to freely adjustable angles from 60° to 300°, die-cast aluminium, white,

1 steel wire, ¶ 2.0 mm, galva-nised, 1500 mm long, length adjust-ed without tools,

1 ceiling fixing element, nickel-plated

···M··· Silver-grey.Ceiling rose 1 piece, for connection of power cable at node with wire suspension.

Supply tubeIn combination with A 03 S.1 piece, plastic, white, ¶ 10 mm, can be cut to suit on-site. For routing and covering of connection cable.

Node with pendant suspension1 piece, consisting of:1 node for up to

4 branchings, to freely adjustable angles from 60° to 300°, die-cast aluminium, white,

1 pendant tube, steel, ¶ 13 mm, with vernier clip for height adjustment to 20 mm, 1500 mm long, can be cut to suit on-site for shorter suspension lengths, with tool-free clip-on vernier clip no thread cutting r equired,

1 ceiling trim of plastic, whi te.

···M··· Silver-grey.

Node1 piece for up to 4 branchings, to freely adjustable angles from 60° to 300°, die-cast aluminium, whi te.···M··· Silver-grey.

Ordering example:Cross-shaped node with 4 branchings:1 node A 03 D,4 adapters

07690 KA/7LV.

Node adapter1 piece, for connec-tion of nodes A 03··· with trunking 07690···, for IP20 continuous lines, consisting of:1 adapter pr ofile,

sheet steel, white, with integral adapter piece of white die-cast aluminium,

1 robust i nner coupling, s heet steel, galvanised,

1 blanking c over, plastic profile, white,

1 through-wiring set 7 x ··· mm²,

1 connector el ement for electrical con-tact with prewired or on-site wired through-wiring in the continuous line.

···2.5 Cable section 2.5 mm².

···M··· Silver-grey.

A 03 S 29 284 00A 03 M-S 45 375 00

05900 AN* 21 726 00* Cables not included in delivery; must be

made available on-site.

05000 ZR length 1 m 21 525 0005000 ZR/2m length 2 m 21 526 00

A 03 P 29 285 00A 03 M-P 45 376 00

A 03 D 22 315 00A 03 M-D 45 377 00

07690 KA/7LV21 951 0007690 KA/7LV 2,546 672 0007690 M-KA/7LV45 378 0007690 M-KA/7LV 2,546 671 00

Node suspensions

max. 2500max. 1500

Gear t rays ·································132Gear tray for emergency lighting ··················148Trunking and wiring ·················150Accessories ······························155Mounting and planning ············157Lamp data ································193

160

Aragon LED

A high protection factor even with frosty temperatures.Aragon LED is the name of the operation-safe lighting solution also suitable for adverse conditions. Complete luminous flux is available immediately in full, even with minus temperatures.

Safe: robust concept with vibration-resistant components. Light can be used instantly without start-up time. Tested over time: construction based on established damp-proof luminaire with rapid mounting system.Homogeneous: excellent illumination thanks to opal, light scattering diffuser and uniform light output at very low temperatures. Low operating costs: low maintenance, with extremely time-saving installation thanks to plug and play.Convincing fundamentals: high protection rating thanks to outstanding technology. With Wieland RST rapid connector system for

time-optimised mounting with high protection rating, implemented simply and quickly.

161

Aragon LED 5000···

113

106

1100 475295

1870EE

Aragon LED···

C0- C180

Aragon LEDWeather-proof surface-mounted luminaires made of polycarbonate with LED

ApplicationCeiling and wall luminaires with LED for damp environments and covered exterior areas. Advantageous for applications requiring in-creased mechanical stability. Especially with low temperatures due to constant light output.

Optical systemConsisting of 40 high power LEDs and an opal polycarbonate diffuser with finely structured end caps, impact-resistant, UV-stabilised, with smooth outer surface.LED, neutral white light colour, colour temperature 4000 K, luminaire luminous flux 4000 lm, connected load 70 W. Constant light output even with very low temperatures.

Luminaire bodyPolycarbonate, can be recycled, flame- resistant, white. Mounting with stainless steel fixing clamps (included). With wire clamp of stainless steel for steel strip suspension or for chain suspension on-site.

Locations exposed to fire hazards Thanks to limited surface temperatures and a high protection rating, versions are suitable for use in rooms with high risk of fire.

Electrical connectionTWW rapid connection system Wieland RST.

Electrical versionDue to optimised thermal management, for minimum service life of 40000 operating hours. ···ET With electronic transformer.···ETDD With digitally dimmable electronic transformer (DALI).

9 d o a IP66 6 joules 850 °C

Designation TOC Electrical version Lamps/ Power ≈kg ···ET ···ETDD Luminous flux/ consumption

Light colourAragon LED 5000 nw···TWW 59 512··· ···40 ···51 LED/5000 lm/nw 70 W 5.1

Accessories TOC DescriptionAragon SB 15 537 00 Steel strip suspension, 1 pair, length 1 m, made of stainless steelZWI RST20i5 BT tbl 59 491 00 5-pole connection socket, turquoise, Wieland (dim) ZWI RST20i3 BT sw 59 459 00 3-pole connection socket, black

Aragon LED···UTE: 0.91 E + 0.08 T DIN 5040: A31 CIBSE: BZ 5/.75/BZ 4/1/BZ 5 NBN L 14-002: BZ 5

162

Actison

163

Unbeatable efficiency for any sports hall.The concept of Actison is synonymous with top achievements in sports halls: less luminaires are needed, less energy is required, and the luminaire convinces with an especially tough construction.

Unbeatably efficient: maximum possible light output ratios within the available optics with interface to intelligent light management.Saves costs: less luminaires per sports hall, less energy consumption.Robust: tough luminaire body for maximum loads and safety.Low-maintenance: up to 100,000 hours of service life with ActisonPlus.Versatile: can be used flexibly for all mounting methods – surface-mounting, recess-mounting and suspended.

Protective grid with quick-release catchInstallation of the protective grid is very simple, facilitated by 2 quick-release catches on each side of the luminaire body. Lay on, clip in, finished. The protective grids are positioned on the mounting frame, offering maximum stability and ball protection.

Cover with IP50 protection ratingOften closed luminaires are required for squash courts and badminton halls. All Actison photometric systems are also available with a closed cover made of PMMA: the outstanding workmanship quality enables the higher IP50 protection rating.

164

Actison RWS 349···Actison S-RSX 349···Actison RSX 349···

C0- C180

C0- C180

C0- C180

C0- C180

Actison/ActisonPlusBall-proof surface-mounted luminaires, with accessories also available as recessed and suspended luminaire with RSX or RWS louvre.

ApplicationBall-proof luminaires for sports halls, tennis courts and multi-purpose halls.···S··· Also for squash courts.

Optical systemsDirect distribution.···RSX··· Energy-efficient parabolic louvre, semi-specular, with reflection-intensifying silver surface, reflectance value > 98 %.···RWS··· Louvre, white, for homogeneous light distribution, sheet steel, powder-coated.

CoverProtective grid, steel, white powder-coated. Ball-proof according to DIN 18032-3.Protective grid can be hinged down and unhooked via quick-release catch.···S··· PLEXIGLAS cover, clear, IP50. Ball-proof according to DIN 18032-3.Cover can be hinged down and unhooked via quick-release catch.

Luminaire bodySheet steel, white powder-coated. With knock-outs on front planes for through- wiring.

Electrical version···E With electronic control gear. ···EDD With digitally dimmable electronic control gear (DALI). ActisonPlus··· With digitally dimmable electronic multi-lamp control gear (DALI) as special version – service life of control gear up to 100,000 hours.

Series connection possible with 3- and 4-lamp luminaires.

6 5 4 d e a IP20 20 joules 650 °C ···S··· IP50

Actison S-RSX 349UTE: 0.80 C + 0.00 T DIN 5040: A50 CIBSE: BZ 1 NBN L 14-002: BZ 2

Actison S-RWS 349UTE: 0.72 D + 0.00 T DIN 5040: A50 CIBSE: BZ 2/.75/BZ 3 NBN L 14-002: BZ 3

Actison RSX 349UTE: 0.88 C + 0.00 TDIN 5040: A50 CIBSE: BZ 1/2/BZ 2 NBN L 14-002: BZ 3/.8/BZ 2/4/BZ 3

Actison RWS 349UTE: 0.79 D + 0.00 T DIN 5040: A40 CIBSE: BZ 2/1.5/BZ 3/2/BZ 2/2.5/BZ 3 NBN L 14-002: BZ 4

165

92 1548E1

E265

DD1 D3

D2

E2

30

92 1548E1

E

465

DD1 D3

D2

E2

30

Actison···

Accessories ······························167Planning example ····················168Lamp data ································193

Designation TOC Electrical Lamps B D D1 D2 D3 E1 E2 ≈kgversion ···E ···EDD mm

RSXActison RSX 249··· 59 026··· ···04 ···07 2 x 49 265 1350 100 100 200 315 50 10.3Actison RSX 280··· 59 027··· ···04 ···07 2 x 80 265 1350 100 100 200 315 50 10.3Actison RSX 349··· 59 029··· ···04 ···07 3 x 49 465 1350 100 260 200 315 65 15.8Actison RSX 380··· 59 030··· ···04 ···07 3 x 80 465 1350 100 260 200 315 65 15.8Actison RSX 449··· 59 031··· ···04 ···07 4 x 49 465 1350 100 300 200 315 50 15.9Actison RSX 480··· 59 032··· ···04 ···07 4 x 80 465 1350 100 300 200 315 50 15.9ActisonPlus RSX 335/49/80··· 59 028··· ···07 3 x 35/49/80 465 1350 100 260 200 315 65 15.8S-RSXActison S-RSX 249··· 59 047··· ···04 ···07 2 x 49 265 1350 100 100 200 315 50 11.2Actison S-RSX 280··· 59 048··· ···04 ···07 2 x 80 265 1350 100 100 200 315 50 11.2Actison S-RSX 349··· 59 050··· ···04 ···07 3 x 49 465 1350 100 260 200 315 65 15.9Actison S-RSX 380··· 59 051··· ···04 ···07 3 x 80 465 1350 100 260 200 315 65 15.9Actison S-RSX 449··· 59 052··· ···04 ···07 4 x 49 465 1350 100 300 200 315 50 16.0Actison S-RSX 480··· 59 053··· ···04 ···07 4 x 80 465 1350 100 300 200 315 50 16.0ActisonPlus S-RSX 335/49/80··· 59 049··· ···07 3 x 35/49/80 465 1350 100 260 200 315 65 15.9RWSActison RWS 249··· 59 033··· ···04 ···07 2 x 49 265 1350 100 100 200 315 50 12.0Actison RWS 280··· 59 034··· ···04 ···07 2 x 80 265 1350 100 100 200 315 50 12.0Actison RWS 349··· 59 036··· ···04 ···07 3 x 49 465 1350 100 260 200 315 65 16.7Actison RWS 380··· 59 037··· ···04 ···07 3 x 80 465 1350 100 260 200 315 65 16.7Actison RWS 449··· 59 038··· ···04 ···07 4 x 49 465 1350 100 300 200 315 50 16.9Actison RWS 480··· 59 039··· ···04 ···07 4 x 80 465 1350 100 300 200 315 50 16.9ActisonPlus RWS 335/49/80··· 59 035··· ···07 3 x 35/49/80 465 1350 100 260 200 315 65 16.7S-RWSActison S-RWS 249··· 59 054··· ···04 ···07 2 x 49 265 1350 100 100 200 315 50 12.7Actison S-RWS 280··· 59 055··· ···04 ···07 2 x 80 265 1350 100 100 200 315 50 12.7Actison S-RWS 349··· 59 057··· ···04 ···07 3 x 49 465 1350 100 260 200 315 65 17.9Actison S-RWS 380··· 59 058··· ···04 ···07 3 x 80 465 1350 100 260 200 315 65 17.9Actison S-RWS 449··· 59 059··· ···04 ···07 4 x 49 465 1350 100 300 200 315 50 18.1Actison S-RWS 480··· 59 060··· ···04 ···07 4 x 80 465 1350 100 300 200 315 50 18.1ActisonPlus S-RWS 335/49/80··· 59 056··· ···07 3 x 35/49/80 465 1350 100 260 200 315 65 17.9

166

Actison STB 349··· Actison S-STB 349···

C0- C180 C0- C180

Actison/ActisonPlusBall-proof surface-mounted luminaires, with accessories also available as recessed and suspended luminaire with STB parabolic reflectors.

ApplicationBall-proof luminaires for sports halls, tennis courts and multi-purpose halls.···S··· Also for squash courts.

Optical systemsDirect distribution.···STB··· Energy-efficient parabolic reflectors, semi-specular, with reflection-intensifying silver surface, reflectance value > 98 %.

CoverProtective grid, steel, white powder-coated.Ball-proof according to DIN 18032-3.Protective grid can be hinged down and unhooked via quick-release catch.···S··· PLEXIGLAS cover, clear, IP50.Ball-proof according to DIN 18032-3.Cover can be hinged down and unhooked via quick-release catch.

Luminaire bodySheet steel, white powder-coated. With knock-outs on front planes for through- wiring.

Electrical version···E With electronic control gear. ···EDD With digitally dimmable electronic control gear (DALI). ActisonPlus··· With digitally dimmable electronic multi-lamp control gear (DALI) as special version – service life of control gear up to 100,000 hours.

Series connection possible with 3- and 4-lamp luminaires.

6 5 4 d e a IP20 20 joules 650 °C ···S··· IP50

Actison S-STB 349UTE: 0.80 C + 0.00 T DIN 5040: A50 CIBSE: BZ 2 NBN L 14-002: BZ 3

Actison STB 349UTE: 0.90 D + 0.00 T DIN 5040: A50 CIBSE: BZ 2 NBN L 14-002: BZ 3

167

92 1548E1

E265

DD1 D3

D2

E2

30

92 1548E1

E

465

DD1 D3

D2

E2

30

Actison···

Planning example ····················168Lamp data ································193

Accessories TOC Description

Actison AE 280 59 505 00 Counter-balance weight 280Actison AE 380 59 506 00 Counter-balance weight 380Actison BAB 1 59 503 00 Ball safety shield 280Actison BAB 2 59 504 00 Ball safety shield 380/480Actison C1 59 493 00 Mounting accessories for cut ceiling 280 Actison C2 59 492 00 Mounting accessories for cut ceiling 380/480 Actison H 59 502 00 Suspension accessories (link chain, turnbuckle etc.) Actison H LB 59 501 00 Suspension accessories for continuous line Actison E04 59 500 00 Link chain E04Actison Paneel 1 59 495 00 Mounting accessories panel 280Actison Paneel 2 59 494 00 Mounting accessories panel 380/480 Actison Paneel 75 59 496 00 Panel adapter 75 (module 100)Actison Paneel 85 59 497 00 Panel adapter 85Actison ZDV/315/80 59 509 00 Through-wiring, 3-pole + nippleActison ZDV/515/80 59 510 00 Through-wiring, 5-pole + nippleActison ZDV/715/80 59 511 00 Through-wiring, 7-pole + nipple 07690/5LV/25m 21 890 00 Through-wiring, 5-pole, 25 mActison ZI4 59 508 00 Replacement key, TRILUX allen key 4 mm

Designation TOC Electrical Lamps B D D1 D2 D3 E1 E2 ≈kgversion ···E ···EDD mm

STBActison STB 249··· 59 019··· ···04 ···07 2 x 49 265 1350 100 100 200 315 50 10.3Actison STB 280··· 59 020··· ···04 ···07 2 x 80 265 1350 100 100 200 315 50 10.3Actison STB 349··· 59 022··· ···04 ···07 3 x 49 465 1350 100 260 200 315 65 14.7Actison STB 380··· 59 023··· ···04 ···07 3 x 80 465 1350 100 260 200 315 65 14.7Actison STB 449··· 59 024··· ···04 ···07 4 x 49 465 1350 100 300 200 315 50 14.8Actison STB 480··· 59 025··· ···04 ···07 4 x 80 465 1350 100 300 200 315 50 14.8ActisonPlus STB 335/49/80··· 59 021··· ···07 3 x 35/49/80 465 1350 100 260 200 315 65 14.7S-STBActison S-STB 249··· 59 040··· ···04 ···07 2 x 49 265 1350 100 100 200 315 50 11.2Actison S-STB 280··· 59 041··· ···04 ···07 2 x 80 265 1350 100 100 200 315 50 11.2Actison S-STB 349··· 59 043··· ···04 ···07 3 x 49 465 1350 100 260 200 315 65 15.9Actison S-STB 380··· 59 044··· ···04 ···07 3 x 80 465 1350 100 260 200 315 65 15.9Actison S-STB 449··· 59 045··· ···04 ···07 4 x 49 465 1350 100 300 200 315 50 16.0Actison S-STB 480··· 59 046··· ···04 ···07 4 x 80 465 1350 100 300 200 315 50 16.0ActisonPlus S-STB 335/49/80··· 59 042··· ···07 3 x 35/49/80 465 1350 100 260 200 315 65 15.9

168

Louvre version/Luminaire cover

Lamp type

Designation 750 lx 500 lx 300 lx

Actison RSX 2x80···

Luminaire quantityIlluminanceLum. arrangement

Eav

b1/b2/b3

��

1x7+4x6+1x7=38779 lx1.1/3.2/3.6

6x4=24501 lx1.9/5.6

4x4=16337 lx1.9/5.6



Eav

b1/b2

��

6x6=36758 lx1.3/3.8

5x5=25532 lx1.5/4.5

4x4=16342 lx1.9/5.6



Eav

b1/b2

��

7x4=28814 lx1.9/6.5

5x4=20586 lx1.9/5.6

4x3=12353 lx2.5/7.5

Actison S-RSX 3x80···


Eav

b1/b2

��

6x5=30788 lx1.5/4.5

5x4=20528 lx1.9/5.6

4x3=12320 lx2.5/7.5

Actison RWS 2x80···


Eav

b1/b2/b3

��

7x6=42755 lx1.3/3.8

6x5=30536 lx1.5/4.5

1x5+2x4+1x5=18321 lx1.5/4.5/5.5



Eav

b1/b2/b3

��

6x6=36758 lx1.3/3.8

5x6=30537 lx1.5/4.5

1x5+2x4+1x5=18328 lx1.9/4.7/5.6



Eav

b1/b2/b3

��

7x5=35832 lx1.5/4.5

6x4=24573 lx1.9/5.6

1x4+2x3+1x4=14329 lx1.9/5.6/7.5

Actison S-RWS 3x80···


Eav

b1/b2

��

7x5=35753 lx1.5/4.5

5x5=25540 lx1.5/4.5

4x4=16351 lx1.9/5.6

Actison STB 3x80···


Eav

b1/b2/b3

��

1x5+4x4+1x5=26753 lx1.5/4.5/5.5

1x5+2x4+1x5=18523 lx1.5/4.5/5.5

4x3=12357 lx2.5/7.5

Actison S-STB 3x80···


Eav

b1/b2

��

6x5=30829 lx1.5/4.5

4x5=20561 lx1.5/4.5

4x3=12336 lx2.5/7.5

Planning examples for sports hall lighting

Planning examplesThe dimensions of sports halls are standardised many times over. For single sports halls (table on left) or triple sports halls (table on right), the tables below specify in-stallation examples for illuminance levels 750 lx, 500 lx and 300 lx.

Adjusted intensityLighting uniformity at the front of the hall can be improved according to needs with additional luminaires between the luminaire lines.

Single sports halls L x W x H: 27.0 x 15.0 x 5.5 m

T5

T5

T5

T5

T5

T5

T5

T5

T5

T5

Planning results

Planning parametersThe calculations are based upon the following basic conditions:

Working plane: 0 mReflectance values: 0.5/0.5/0.3Maintenance factor: 0.8Luminous flux (49 W): 4300 lmLuminous flux (80 W): 6150 lm

The evaluation zone for the calculations in the table below for the simple hall is the volleyball court including 3 m border (24 x 15 m) and for the triple discipline hall the standard handball court (40 x 20 m).

ConfigurationSports hall luminaires should be arranged as luminaire rows parallel to the longitudinal sides.

In the planning tables below, b1 represents the distance of the first luminaire row to the nearest wall, b2 represents the distance of the second luminaire row; see adjacent sketch. With an uneven number of luminaire rows, one luminaire row runs through the centre of the hall. b3 corresponds to the distance from the side wall to the 3rd lumi-naire with a luminaire arrangement the final required distribution.

With partitionable halls, it must predominantly assumed that the individu-al hall areas can be classi-fied in lighting class III, the complete hall in lighting class I or II.

Photometric selection options···RSX··· Energy-efficient parabolic louvre, semi-specular, with reflection-intensifying silver surface, reflectance value > 98 %.···RWS··· Louvre, white, for homogeneous light distribution, sheet steel, powder-coated.···STB··· Energy-efficient parabolic reflectors, semi-specular, with reflection-intensifying silver surface, reflectance value > 98 %.

b 1b 2

Symmetrical luminaire arrangement

b 1b 2b 3

Luminaire arrangement for adjusting intensity distribution

169

Louvre version/Luminaire cover

Lamp type

Designation

750 lx 500 lx 300 lx

Actison RSX 2x80··· Luminaire quantityIlluminanceLum. arrangement

Eav

b1/b2

��

18 x 6 = 108785 lx2.3/6.8

12 x 6 = 72524 lx2.3/6.8

9 x 5 = 45328 lx2.7/8.1


Eav

b1/b2

��

15 x 7 = 105783 lx1.9/5.8

12 x 6 = 72538 lx2.3/6.8

9 x 5 = 45337 lx2.7/8.1


Eav

b1/b2

��

15 x 5 = 75768 lx2.7/8.1

9 x 6 = 54555 lx2.7/6.8

6 x 5 = 30310 lx2.7/8.1

Actison S-RSX 3x80··· Luminaire quantityIlluminanceLum. arrangement

Eav

b1/b2

��

15 x 6 = 90826 lx2.3/6.8

9 x 6 = 54497 lx2.3/6.8

6 x 6 = 36332 lx2.3/6.8

Actison RWS 2x80··· Luminaire quantityIlluminanceLum. arrangement

Eav

b1/b2

��

18 x 7 = 126797 lx1.9/5.8

12 x 7 = 84532 lx1.9/5.8

9 x 6 = 54345 lx2.3/6.8


Eav

b1/b2

��

15 x 8 = 120759 lx1.7/5.1

12 x 7 = 84532 lx1.9/5.8

9 x 5 = 45336 lx2.7/8.1


Eav

b1/b2

��

15 x 6 = 90761 lx2.3/6.8

9 x 7 = 63533 lx1.9/5.8

9 x 4 = 36307 lx3.4/10.1

Actison S-RWS 3x80··· Luminaire quantityIlluminanceLum. arrangement

Eav

b1/b2

��

15 x 7 = 105802 lx1.9/5.8

9 x 8 = 72551 lx1.7/5.1

9 x 5 = 45346 lx2.7/8.1

Actison STB 3x80··· Luminaire quantityIlluminanceLum. arrangement

Eav

b1/b2

��

12 x 6 = 72752 lx2.3/6.8

9 x 6 = 54559 lx2.3/6.8

6 x 5 = 30311 lx2.7/8.1

Actison S-STB 3x80··· Luminaire quantityIlluminanceLum. arrangement

Eav

b1/b2

��

12 x 7 = 84813 lx1.9/5.8

9 x 6 = 54524 lx2.3/6.8

6 x 6 = 36352 lx2.3/6.8

Triple sports halls L x W x H: 45.0 x 27.0 x 7.0 m

T5

T5

T5

T5

T5

T5

T5

T5

T5

T5

Planning results

Light managementFurther possibilities for light control come about from integration of the energy-saving LIGHTGATEplus light management s ystem, see in addition page 176.

System settings can be set via the press of a button for example the three sports hall-typical nominal levels of 750, 500 and 300 lux save energy by integration of daylight via a sensor.

Step switching3-lamp TRILUX sports hall luminaires with electronic control gear can be operated with series c onnection. For example the lighting level in 750 lux installa-tions can be reduced to 500 lux.

3- and 4-lamp luminaires can be operated with series connection. With twin lamp luminaires with ECG, this is not possible with series luminaires, as twin-lamp ECGs are used.

LIGHTGATEplus hall controllers are usually mounted outside of the luminaires in sub- distribution boxes. The sensors are also installed outside of the luminaires, on or in the sports hall ceiling together with ball protection covers.Only dimmable luminaires with DALI interface are then required. All TRILUX sports hall luminaires with dimmable control gear are available as standard via the order number supplement ···EDD.

Presence detection makes further savings possible. This function is also integrated in LIGHTGATEplus.

Ball protectionIn addition to photometric quality, sports halls also need mechanical quality.Luminaires for sports hall should be protected from damage by flying balls.

This requirement is fulfilled with all TRILUX sports hall luminaires for surface-mounting or recess-mounting to fixed ceilings or sub-constructions, a nd also with suspended mounting, with or without 110N angled trunking.

Ballproof inspectionWith ballproof inspection, sports hall luminaires are tested with a ball shooting device. After 36 shots with impact speeds of 60 km/h, the luminaires must have no significant damage and no luminaire parts may fall away.

LLLLiiiigggghhhttt mmaannaaggeemment

172

TRILUX light management

Intelligent light management saves energy and reduces carbon dioxide emissions because it knows when artificial light is needed and when not. In addition TRILUX solutions can be installed extremely simply. Such solutions are available for nearly all applications, ranging from single offices to industrial halls. And TRILUX luminaires can also be integrated easily into existing building control systems.

Often in addition to the demand for high energy efficiency there is also the wish for individuality and design flexibility. User-friendly operation and clarity is therefore particularly important. But modern lighting electronics as part of the TRILUX system can also be used effectively for supporting the natural daily cycle and sense of well-being.

173

20 %

35 %

55 %

Further information at www.trilux.co.uk/lm

The presence detectionA sensitive sensor recognises when people are present and switches the light on. After a period of absence, e.g. 15 minutes, the light is automatically switched off again, meaning artificial light is only used when it is needed.

* Potential savings depend on daylight supply, relative absence and other factors. This can be determined with the calculation procedure according to DIN V 18599 for a wide variety of user profiles.

The daylight regulationA light sensor measures the brightness of the room. By adjusting to the daylight component, only as much artificial light as required is used to reach a predefined lighting level.

185 DALI Poti 185 DALI Repeater184 Dim Pico182 Luxomat180 ActiLume174 LIGHTGATEplus176 LIGHTGATEplus Controller for

halls178 LIGHTGATEbasic

188 DALI Easy186 Valuco Active 187 DALI Dynamic Control

Your advantages at a glance• Savings: you save money for

lighting energy, and reduce carbon dioxide emissions.

• Simple installation: sensors and luminaires are extremely simply installed and configured. Sensors are already integrated in several TRILUX luminaires.

• Sensor positioning: your lighting planners will be glad to specify the optimal location for you.

• Integration in the building con-trol: as an alternative to simple light management systems, TRILUX luminaires can be opti-mally integrated into higher- level building controls (e.g. EIB).

As you can see, TRILUX light management systems are as efficient as they are simple in terms of use.

Possible energy savings with TRILUX light management*:

Daylight regulation + presence detection

Presence detection

Daylight regulation

Light management for activating lightingMedical advancements of the past years show that the biorhythms and therefore the sub-conscious life functions of people are significantly influenced by light that accompa-nies people in their daily cycles. Their natural needs are characterised by evolution. It there-fore makes sense to adopt daylight as an example for the artificial lighting of our mod-ern living environments. In particular, the

blue component of light in the colour of the sky has been determined as our synchroniser. As such, the natural biological rhythm and well-being of people can be supported by the specific control of specific light components within lighting. TRILUX implements the light management systems LIGHTGATEplus and DALI Easy for this purpose, e.g. for pre-set solutions with the Valuco Active luminaire.

Light management and coloured light In many public areas, applications with deco-rative coloured light are used. Often these are based on RGB colour mixing, whereby LED is increasingly being used. The DALI Easy and DALI Dynamic Control systems are suitable for the individual setting of any light colour according to customer requirements and also for dynamic, time-controlled colour sequences.

174

55 %LIGHTGATEplusRoom-oriented light management with daylight-dependent control and presence detection

System featuresLIGHTGATEplus is a high-performance light management system with components for installation both within the luminaires and outside of the luminaires. The system com-bines automatic presence detection and constant light control for maximum energy savings. Both functions can be deactivated. The nominal value for constant light control, the switch-off delay and operating mode (automatic / semi-automatic) can be set inde-pendently of each other. The DALI luminaires connected to an integral control device can be operated in up to four groups. In areas sup-plied with daylight (e.g. classrooms), separate control with two separate light sensors (indi-vidual group control) can be set up. Offset control is also possible. Dimming of lumi-naires near to the windows is via a different setting (offset) to the group away from the windows. A further two groups can assume the function of supplementary lighting without daylight-dependent control. Simple manual dimming and switching can be via single-button operation. Multi-button operation gives further operating possibilities, or a remote control device can be used requiring a receiver (integrated in the LGS-RPL/S sensor unit).

The advantages• Energy savings via daylight use• Additional energy savings via presence

detection • Intuitive one-button operation

(switching, dimming)• Multi-button operation with extended

functions• Operation via remote control device• Nominal value can be set individually• Connection of max. three sensor units• Individual control of groups of two• Switch-off delay for presence detection can

be set (3 min. to 60 min. or deactivated) • Fully automatic operation (switching off,

switching on again)• Semi-automatic operation (only switching

off, manual switching on) • Simple installation and start-up

System luminairesMaster luminaires with integral LIGHTGATEplus light management can be integrated into many TRILUX luminaire ranges (luminaire designation: “···+LGM”, with LGC-ES01/L/D control device) on request. They are wired ready for connection. All required electrical connections are available at easily accessible luminaire terminals (mains power, 2 x DALI, up to 4 push-buttons, 1 x RJ10 for external sensors). The connection of additional sensor units (total of 3) is possible for expanding the detection area of the presence detection. These can be in the form of sensor luminaires (···+LGS) or sensor units for recess-mounting or surface-mounting.

• Master luminaire (···+LGM) with integral sensor unit (LGS-0PL/M) and control device (LGC-ES01/L/D)

• Sensor luminaire (···+LGS) with integral sensor unit (LGS-0PL/M)

• Simple switching and dimming via single-button operation (zero-voltage)

• Further operating functions via multi-button operation

• Control of up to 50 DALI luminaires possible (incl. master luminaire)

• Connector terminals for 2 DALI groups (single groups or offset control)

• Up to 4 DALI groups in addressing mode• Simple installation with low wiring effort

Connection example with LIGHTGATEplus luminaires

D1+D2 -

D1+D2 -

L N

NL

L NL N D1+D2 -

D1+D2 -

L N

L N

Sensor luminaire ("···+LGS")

D1+D2 -

L N

Master luminaire ("···+LGM")

Group 2

Group 1

1 2 3 54 6 7 8

175

55 %

LGR-SCLGS-RPL/S

LGM-SMLGC-ES01/L/D

270019

003500

5000

270019

00

8000

5000


LIGHTGATEplus System components

Control deviceController LGC-ES01/L/D• For installation in luminaire• Control of up to 50 DALI ECGs possible• Connector terminals for 2 DALI groups • Connector terminals for up to

4 push-buttons (zero-voltage, SELV)• RJ10 connection for sensor units• Height of housing: 21 mm

(Details about push-button functions and system configurations to be found in the oper-ating instructions at www.trilux.co.uk/service)

Sensor LGS-RPL/S Sensor LGS-OPL/M

Sensor unitsSensor LGS-RPL/S• For surface-mounting and recess-mounting

(with additional accessories)• Integral light sensor• Integral presence sensor• Integral radio receiver for system

remote control

Sensor LGS-0PL/M (mini-sensor)• For installation in luminaire• For recess-mounting (with additional

accessories)• Integral light sensor• Integral presence sensor• With RJ10 connection cable, 2 m

System remote controlLGR-SC• Radio remote control• For the complete operation and convenient

programming of all system functions of LIGHTGATEplus control devices, for installation in luminaire

• Sensor LGS-RPL/S requires radio receiver

Designation TOC Description LGC-ES01/L/D 50 444 00 Controller for installation in luminaire LGR-SC 50 449 00 Remote control LGS-RPL/S 50 448 00 Sensor (light, presence, radio receiver) LGS-0P0/S/T 56 787 00 Radio presence detection LGS-0PL/M 58 899 00 Mini-sensor (light, presence) LGM-RM 50 450 00 Recess-mounting set for sensor LGS-RPL/S LGM-SM 50 451 00 Surface-mounting set for sensor LGS-RPL/S LGM-RM/M 58 900 00 Recess-mounting set for mini-sensor LGS-OPL/M 0MD2 50 567 00 Modular two-way distributor for data lines 0MK1 22 274 00 Modular coupling for data lines 0L02 22 261 00 Data line 2 m 0L05 22 262 00 Data line 5 m 0L10 22 263 00 Data line 10 m 0L20 22 264 00 Data line 20 m 0L50 22 265 00 Data line 50 m LGI-DA 50 566 00 Interface converter, DALI 1-10 VFurther control devices with special push-button functions on request, also available in master luminaires.

176

55 %

LGC-HX01/S/D LGS-RPL/S

LGM-SM

LIGHTGATEplus Light management for halls with daylight-dependent control and presence detection

The LGC-HX01/S/D control device has been designed for optimal access to the system in halls and similar locations (e.g. works halls, sports halls, event halls, foyers) via installa-tion in the sub-distribution. All system set-tings are via the control device. This enables the connection of up to 64 ballasts in each case for broadcast operation at three DALI connections. Presence detection and constant light control are via LGS-RPL/S sensor units. Both functions can be deactivated. The nomi-nal values for constant light control, the switch-off delay and its operating mode (auto-matic / semi-automatic) can be set independ-ently of each other. Separate control of the 3 DALI groups with separate light sensors (individual group control) can be implemented. For each area, two supplementary sensor units can be installed for presence detection. If all DALI groups are in standby operation via the DALI interface, deactivation of the mains supply for the connected luminaires is via the integral circuit-breaker, usually with post-connected power contactors. In this way standby losses are minimised. Simple manual dimming and switching of the lighting and the calling up of various nominal control values or lighting scenes can follow with up to 6 installa-tion push-buttons. Up to three control devices can be installed in master/slave switching according to application (e.g. triple-discipline sports hall). This enables switching between separate operation of the control devices (single hall operation) and common operation (total hall operation) for all three controllers.


detection • Connection of up to 192 luminaires to

one control device• Operation of up to 576 luminaires via

master/slave switching of 3 control devices• Up to three regulation ranges per controller• Broadcast operation, no addressing• Up to three presence sensors per regulation

range• Two sensitivity levels for presence detection• All settings are via the control device

Control deviceController LGC-HX01/S/D • For installing in the sub-distribution• Connector terminals for 3 DALI groups • 64 ECGs per DALI interface, broadcast

operation• Connector terminals for up to

6 push-buttons (zero-voltage, SELV) and control lamp (24 V DC)

• Connector terminals for 2 function selection switches and control lamp (24 V DC)

• 3 x RJ10 connections, each for 3 sensor units LGS-RPL/S

• Integral circuit-breaker (1000 VA), for avoidance of standby losses from controlled DALI ballasts

• Housing 9 DRA

Sensor unitSensor LGS-RPL/S • For surface-mounting and recess-mounting

(with additional accessories)• Integral light sensor• Integral presence sensor• For mounting heights up to 8 m

N LPE

Group 1

Luminaire with DALI ballastN LPE DADA N LPE DADA N LPE DADA

N LPE DADA N LPE DADA

Group 2 Group 3

Group 1 Group 2 Group 3

Luminaire with DALI ballast Luminaire with DALI ballast

Luminaire with DALI ballast

Further luminaires, max. 64 DALI ballasts



Luminaire with DALI ballast Luminaire with DALI ballastN LPE DADA

220...240 V0/50...60 Hzta: 0...65 °C

SensorGr. 1

Sensor1-3

Power

L L L N N PE DA1

DA1

+UB

SensorGr. 2

SensorGr. 3

L : max. 1000VADA1: max. 64 EVGDA2: max. 64 EVGDA3: max. 64 EVG

Gesamt-/Total hallH Einzel-/Single hall

Order no.: 177 042

Sensor4-6

Sensor7-9

SlaveController

SlaveController

Progr.Interface

DA2

DA2

DA3

DA3

S1 S2 G8 H9 COM CO

M

T1 T2 T3 T4 T5 T6 T7 COM1

COM2

654321

COM654321

177Further information at www.trilux.co.uk/lm

LIGHTGATEplus Example of a triple-discipline sports hall with 3 control devices in master/slave operation

FunctionsSingle hall use• Room lighting controlled according

to daylight• 2 independent control groups per hall

in broadcast operation each with one light sensor (Sensor 1, Sensor 2)

• Switches off with sufficient daylight• Presence detection per hall over the

complete space with 3 sensors• Automatic switching on for each hall with

falling to 200 lx in controlled operation • Setting possibilities – Push button 1: first set value 200 lx – Push button 2: second set value 300 lx – Push button 3: third set value 500 lx• Switching on again with absence to 200 lx

in controlled operation

Complete hall useAs with single halls, but with:• Presence detection over the complete

hall with 9 sensors• Lighting control of complete hall via the

sensors of one control device (master)• Setting possibilities – Switch S1: changing from regulated

operation (set value) to manual operation (fixed dimming value), presence deactivated

– Push button 1: first set value/dimming value 200 lx

– Push button 2: second set value/dimming value 300 lx

– Push button 3: third set value/dimming value 500 lx

Designation TOC Description LGC-HX01/S/D 56 785 00 Hall controller for mounting in the sub-distribution unitLGS-RPL/S 50 448 00 Sensor (light, presence, radio receiver) LGM-RM 50 450 00 Recess-mounting set for sensor LGS-RPL/SLGM-SM 50 451 00 Surface-mounting set for sensor LGS-RPL/S 0MD2 50 567 00 Modular two-way distributor for data lines 0MK1 22 274 00 Modular coupling for data lines 0L02 22 261 00 Data line 2 m 0L05 22 262 00 Data line 5 m 0L10 22 263 00 Data line 10 m 0L20 22 264 00 Data line 20 m 0L50 22 265 00 Data line 50 m 0BS 22 255 00 Ball protection basket for sensors LGI-DA/S 56 786 00 Interface converter, DALI 1-10 V, for the sub-distribution unit

Energy requirement (according to DIN V 18599)Reference value according to EnEV 46364 kWh/aPlanned lighting system 27344 kWh/aReference value shortfall 42 %

Room dataComplete room 45 m x 27 m x 7 mPlaying area 40 m x 20 mConnected load 10,584 Watt

Energy saving via light management 29 %

500 lx 300 lx 200 lx 500 lx 300 lx 200 lx

Single/complete

Active/inactive control

500 lx 300 lx 200 lx

Sensor 2

Hall 3

Sensor 3

Sensor 1

Sensor 2

Hall 2

Sensor 3

Sensor 1

Sensor 2

Hall 1

Sensor 3

Sensor 1

178

55 %

System featuresLIGHTGATEbasic is the basic version of the LIGHTGATE family. It is suitable for installing in luminaires and fulfills all fundamental requirements of a light management system for a workstation or small room. The system combines automatic presence detection and constant light control for maximum potential. Both functions can be deactivated. The nominal value for constant light control, the switch-off delay and operating mode (auto-matic / semi-automatic) can be set independ-ently of each other. The connected DALI luminaires can be operated in two groups via separate DALI connections. In rooms with differing daylight quantities (e.g. on front planes of window axes), separate control with two separate light sensors (individual group control) is recommended. Offset control is also possible (see LIGHTGATEplus). As soon as both groups are in standby operation, mains supply to the luminaires is switched off via an integral circuit-breaker. In this way standby losses are minimised. Manual dimming and switching is possible via installation push button. Infrared system remote control is also available.


detection • Intuitive one-button operation (switching,

dimming)• Operation via system remote control• Nominal value can be set individually• Connection of max. two sensor units,

individual control of two groups• Switch-off delay can be set (with remote

control, 3 min. to 60 min. or deactivated) • Fully automatic operation (switching off,

switching on again)• Semi-automatic operation (only switching

off, manual switching on) • Integral circuit-breaker (to 1000 VA)• Sensor unit has integral receiver for

IR system remote control• Simple installation and start-up

LIGHTGATEbasicLight management for luminaire groups with daylight-dependent control and presence detection

System luminairesMaster luminaires with integral LIGHTGATEbasic light management can be integrated into many TRILUX luminaire ranges (luminaire designation: ···+LGbM) on request. They are wired ready for connection. All required electrical connections are available at easily accessible luminaire terminals (mains power, switched phase L´, 2 x DALI, 1 push-button, 1 x RJ10 for external sensors). The connection of an additional sensor unit is possible for expanding the detection area of presence detection. This can be in the form of a sensor luminaire (···+LGbS) or sensor unit for recess-mounting.

• Master luminaire with integral sensor unit and control device (···+LGbM)

• Sensor luminaire with integral sensor unit (···+LGbS)

• Switching and dimming via push button (pushed phase) or remote control


• Connector terminals for 2 DALI groups (single groups or offset control)

• Simple installation with low wiring effort• Avoidance of additional standby losses of

connected luminaires via further wiring with switched phase L´ (internal ECG also on switched phase)

D1+D2 -

D1+D2 -

L N

NL

L LNL N D1+D2 -

D1+D2 -

L N

L N

Sensor luminaire ("···+LGbS")

D1+D2 -

L N

Master luminaire ("···+LGbM")

Group 2

Group 1

1 2 3 4

Connection example with LIGHTGATEbasic system luminaires

179

55 %

LGC-EB01/L/D LGS-IPL/M LGR-SI


LIGHTGATEbasic System components

Control deviceController LGC-EB01/L/D• For installation in luminaire• Control of up to 16 DALI ECGs possible• Connector terminals for 2 DALI groups • Connector terminals for one push button

(pushed phase)• Connector terminals for mains connection

and further wiring of switched phase• Integral circuit-breaker (1000 VA), for avoid-

ance of standby losses of controlled ballasts• RJ10 connection for sensor unit LGS-IPL/M• Height of housing: 21 mm

Sensor unitSensor LGS-IPL/M• Integral light sensor• Integral presence sensor• Integral IR receiver (passive infrared)

for system remote control• With RJ10 connection cable, 2 m

System remote controlLGR-SI• Infrared remote control• For complete operation and programming

of all LIGHTGATEbasic system functions

Designation TOC Description LGC-BS01/L/D 59 972 00 ControllerLGR-SI 59 974 00 Remote controlLGS-IPL/M 59 973 00 SensorLGM-RM/M 58 900 00 Recess-mounting set for mini-sensor LGS-IPL/M

Order no.: 10076675

Group 2Group 1

Group 1

Luminaire with DALI ECG




Further luminaire Group 1 Further luminaire Group 2

Group 2

220...240 V0/50...60 Hz

ta: 0...65 °C

T

T

L'

In

Out

N LPE

Push button

N

L

DADADADA

Gr. 2max. 8

Gr. 1max. 8

180

55 %

System featuresActiLume is a simple and convenient light management system especially for small rooms (e.g. single offices). The system achieves high energy savings via automatic presence detection and constant light control. The set value for constant light control can be set to preference. Optionally, DALI luminaires with ActiLume can be operated as two groups at separate connections (near to window and far from window). Dimming of the luminaires far from the window follows the luminaires of Group 1 controlled with the sensor, with an offset of + 30 % (offset operation). Simple manual dimming and switching of the lighting can be implemented via an optional installa-tion button. The remote control enables addi-tional control, from simple dimming and switching (LMS ACTI UID 8510 and ···IRT 8010) up to complete system configuration (LMS ACTI IRT 8098 and ···IRT 8099).

The advantages• Energy savings via daylight use• Electronic constant light control • Nominal value can be set individually• Luminaires automatically switch off with

sufficient daylight• Additional energy savings via presence

detection • Switch-off delay 15 min.• Expansion of presence detection area by

connection of external sensors• Simple operation via push button or remote

control• Simple installation and start-up

System luminairesMaster luminaires with integral ActiLume light management can be integrated into many TRILUX luminaire ranges (luminaire designation: ···+ActiM) on request. They are wired ready for connection. All required electrical connections are available at easily accessible luminaire terminals (mains power, 2 x DALI, 1 x push-button). For expanding the detection area of presence detection, connection of up to 2 external sensors for installation on or in ceilings is possible.

• Sensor and control device are integrated within luminaire (master luminaire ···+ActiM)

• Switching and dimming via push button and remote control


• Connector terminals for 2 DALI groups (window, aisle), for offset control

• Connection of max. 2 external presence sensors to DALI line

• Simple installation with low wiring effort• Nominal value setting at the sensor or via

remote control (LMS ACTI IRT 8098 or ···8099)

• Switch-off delay of presence detection is 15 minutes (cannot be modified)

ActiLumeLight management for luminaire groups with basic functions for daylight-dependent control and presence detection

5 m

6 m

2,5 m (max. 3,5 m)

...+ActiM ...EDD

...EDD...EDD

LMS ACTI LRM 8118/00 (optional)

Window

L1 N

D1+

D2 -

D1+

D2 -

D1+

D2 -

D1+

D2 -

D1+

D2 -

N L N

N

L

L NL N

Sensitivity range of presence control (6 x 5 m)

Connection example with ActiLume system luminaire

181

55 %

LMS ACTI IRT 809···LMS ACTI UID 8510LMS ACTI IRT 8010 LMS ACTI LRM 8118


ActiLumeSystem components

Infrared wall operating panel UID 8510 (for the user)• Switching and dimming of lighting• Addressable on one of seven different group

addresses, A to G (DIP switch in battery compartment of operating panel) for control of addressed ActiLume luminaires.

• Suitable for wall-mounting

Infrared remote control IRT 8010 (for the user)• Switching and dimming of lighting• Addressable on one of seven different group

addresses, A to G (rotary control in battery compartment of remote control) for control of addressed ActiLume luminaires

• Range 2.5 m• Wall bracket available as accessory

(LRH 8010/00)

IR presence sensor ACTI LRM 8118/00• For expansion of the detection area• To be connected to a DALI control line

Infrared remote control IRT 8098 (Service remote control)• Switching and dimming of lighting• Nominal value setting• Operating mode selection (single or

open-plan offi ce)• Test function for inspecting detection area

of presence sensor • Range 2.5 m

Infrared remote control IRT 8099(Service remote control)• Switching and dimming of lighting• Nominal value setting• Operating mode selection (single office,

open-plan office, classroom, conference room, corridor, washroom)

• Setting the level for background lighting (in open-plan office or corridor mode)

• Activation or deactivation of switch-on delay (20 s) with switching on of mains supply or with return of mains after a power failure (power-up state)

• Assignment of group addresses (A to G)• Reset function for retrieval of factory

settings• Querying of set operating mode• Test function for inspecting detection area

of presence sensor• Range 2.5 m

Designation TOC Description LMS ACTI UID 8510 59 909 00 Wall operating panel (On/Off/Dimming)LMS ACTI IRT 8010/00 50 439 00 Remote control (On/Off/Dimming) LMS ACTI LRH 8010/00 50 442 00 Wall bracket for IRT 8010/00 LMS ACTI IRT 8098/00 50 440 00 Remote control with basic programming functions LMS ACTI IRT 8099/00 50 441 00 Remote control with expanded functions LMS ACTI LRM 8118/00 50 443 00 Expansion sensor for presence detection LMS ACTI LRH 8100/00 58 733 00 Surface-mounted enclosure to expansion sensor LMS ACTI LRM (8118/00)

182

35 %

E+LuxoM E E+LuxoS

NL

E

L N LR N L NL NR L’

2500

1000

5000

10000

LuxomatSimple light control via presence detection

System luminairesMaster luminaires with integral Luxomat light management can be integrated into many TRILUX luminaire ranges (luminaire designa-tion: ···+LuxoM) on request. They are wired ready for connection. All required electrical connections are available at easily accessible luminaire terminals. System settings for Luxomat master luminaires are fundamental-ly via a remote control. For expansion of the detection area, the connection of sensor luminaires (luminaire designation ···+LuxoS) with integral slave sensors is possible.

• Master luminaire (···+LuxoM) with integral master sensor (Luxomat PD9-M)

• Sensor luminaire (···+LuxoS) with integral slave sensor (Luxomat PD9-S)

• Manual operation via push button and remote c ontrol

• All system settings implemented with the IR-PD9 remote control

• Expansion of detection area with any number of sensor luminaires (···+LuxoS)

• Simple installation with low wiring effort• Switching of up to six 1-lamp luminaires or

four 2-lamp luminaires • To increase the switching capacity a power

contactor can be subsequently activated• Standby power consumption < 1 W

Factory setting• Switch-off delay: 5 min.• Threshold value: 200 lux• Fully automatic mode

System featuresLuxomat is a simple light management sys-tem for the presence-dependent switching of luminaires. It additionally enables daylight-dependent deactivation with the exceeding of a set threshold value. The system is used mainly in areas with low daylight levels in which constant light control can be done without, or in areas having only switchable luminaires. Luxomat is available on request as an integral solution in many TRILUX master luminaires.

The advantages• Energy savings from switching via presence

detection • Operation possible with one push button• Fully automatic or semi-automatic can be

selected• Automatic switching on and off with fully

automatic• Only automatic switching off with semi-auto-

matic, switching on again via push button• Switch-off delay can be selected (15 sec. to

30 min.)• Additional savings via automatic switching

off with sufficient brightness (threshold switch)

• Threshold value can be set from 20 lx to 2000 lx

• Wide variety of mounting possibilities• Simple installation • Simple retrofitting into existing lighting

installations• Only switchable (non-dimmable) luminaires

required

Detection area of master luminaires

Electrical connection

183

10 m

5 m

10 m

2,5 m

···PD4-M-GH-AP···IR-PD4-GH

35 %

44 m

22 m

9 m

···PD2-M-AP···IR-PD


LuxomatSimple light control via presence detection

External luminaire sensorsThe sensors Luxomat PD2··· and Luxomat PD4-GH are for external luminaire mounting indoors. Common specifications are:• Switch-off delay and threshold value can be

adjusted at the sensor• Switch-off delay, threshold value and operat-

ing mode (fully/semi-automatic) can also be set with specific remote control

• Simple installation with low wiring effort• Power consumption < 1 W

Luxomat PD2···• Versions for surface-mounting or

recess-mounting• Circular detection area• Suitable for mounting heights to 5 m• Special optical system for detection of very

small movements• Relay with additional switching function

(zero-voltage) for external consumers (air-conditioning)

• Delay period for external consumers can be set at the sensor (5 to 120 min.)

• Remote control IR-PD

Remote control IR-PD• Infrared remote control for setting and

operation of Luxomat PD2··· sensors

Luxomat PD4-GH• Surface-mounted sensor for high

mounting heights• Oval detection area • Suitable for mounting heights to 13 m• Range approx. 44 m, especially for highbay

racking• Remote control IR-PD4-GH

Remote control IR-PD4-GH• Infrared remote control for setting and

operation of Luxomat PD4-GH sensor

···Luxomat PD4···

Designation TOC Description LMS Luxomat PD2-M-AP 58 717 00 Presence detector for surface-mounting (master) LMS Luxomat PD2-M-DE 58 715 00 Presence detector for recess-mounting (master) LMS Luxomat PD2-S-AP 58 718 00 Presence detector for surface-mounting (slave) LMS Luxomat PD2-S-DE 58 716 00 Presence detector for recess-mounting (slave) LMS Luxomat PD4-M-GH-AP 58 967 00 Presence detector for high halls, surface-mounting (master) LMS Luxomat PD4-S-GH-AP 58 968 00 Presence detector for high halls, surface-mounting (slave) LMS Luxomat IR-PD 58 719 00 Remote control for LMS Luxomat PD2-M LMS Luxomat IR-PD4-GH 58 969 00 Remote control for LMS Luxomat PD4-M-GH LMS Luxomat IR-PD9 59 436 00 Remote control for Luxomat master luminairesLMS Luxomat BSK 58 970 00 Ball protection basket

···Luxomat PD2···

184

20 %

• Daylight dependent dimming • Without switching off luminaires• Dimming sequence according to sketch

(no constant light control)• Installation height max. 4 m• Simple plug-on light sensor for clipping onto

the fluorescent tube• Clip included for T5 and T8 lamps• Setting of sensor by rotating the housing and

opening the shield• For 1-10 V interface (ED luminaire version)• For control of up to 10 electronic controle

gears (1 ...10 V)• Can be installed in all RSX, RPX, RMV, RSV,

RPV and RWV louvres

Dim Pico Daylight-dependent dimming without switching off luminaires

Dim Pico is a light sensor for control of individual luminaires or small luminaire groups via the 1...10 V interface. The sensor is generally installed in the luminaire on-site. For this purpose, only connection of the sensor to the luminaire terminals of the interface and attachment of the fixing clamp are required.

Dim Pico commences control from a nominal value that can be set on-site via a shield at the sensor. The system regulates down to a minimum with increasing detected overall brightness. This enables some of the lighting energy to be saved.

• Energy savings via daylight dependent dimming

• Simple installation on-site• Low cost because of simple implementation

Dim Pico uses approximately 50% of the day-light, meaning it regulates artificial lighting down to a minimum only with increased ingress of daylight.

ExampleWith darkness, artificial lighting is set to 500 lx. If daylight increases, artificial light is dimmed down to 50% of the daylight compo-nent (meaning with 500 lx pure daylight, dimmed to 250 lx artificial light). Artificial light is at minimum dimming setting with 1000 lx daylight.

Working plane lighting (lux)

Daylight (lux)

1500

1000

500

500 1000 1500

LMS Dim Pico 1 TOC 58 485 00

Total with Dim Pico

Daylight

Luminaire luminous flux

L

DIMM EVG 1...10 V ~~

+-

N

LMS Dim Pico 1

N - +L

185

230 V/50 Hz 100 m

300 m


• DALI control device for DALI luminaires• Intuitive operation according to classic model

(switching/dimming via pressing or rotating of the operating button)

• Uniform control of luminaires• Installation in standard flush mounted box• With integral mains power for 25 DALI

participants• Connection of an auxiliary unit with only

2 cable wires (without connection of integral mains supply)

• Connection of up to 50 DALI luminaires with parallel switching of second DALI poti with mains power

• Here connection of a further auxiliary unit is possible

• Broadcast operation, no addressing required• Saving of one switch-on brightness• Saving of one basic brightness (minimum

value)

DALI Poti / DALI RepeaterManual control

Dimmable luminaires enable setting of the artificial lighting level according to needs. This occurs with the help of light management devices. With the simplest version, connected luminaires are only set manually by users according to individual needs. DALI control devices ensure uniform, synchronous switch-ing and dimming and low installation effort.

• Individual selection of lighting level• Intuitive operation• Connection of several operating panels• Simple installation

• DALI control device and signal amplifier• Intuitive touch-dim operation (switching with

short pressing of button, dimming with long pressing of button)

• Controls up to 64 DALI ECGs together as a group

• Control with pushed phase • Connection of parallel push buttons possible

as auxiliary units• Saving of one switch-on brightness• Alternative control with DALI signal, as signal

amplifier• Connection to the DALI output of a control

device• Extension of DALI line possible by 300 m

each• DALI addressing of repeater (input) possible• Broadcast operation of operating devices

(output), no addressing• For the construction of DALI installations

with more than 64 participants• Flat standard housing for installing in

luminaire (the DALI repeater can be installed in luminaires ex-works on request)

• Installation in LMS Easy CI box possible (see page 190)

LMS DALI Poti TOC 58 432 00 LMS DALI Repeater TOC 58 905 00

Up to 64 ECGs

Up to 4 operating panels

Cable length 300 m50 DALI ECGs with 2 DALI poti to mains voltage

186

Valuco ActiveActivating light with Valuco Active system luminaires

TRILUX Valuco Active combines two lighting components to achieve daylight-similar light-ing: direct and diffuse light (stray light). The direct light is created according to the ingress of sunlight and the diffuse light according to the daytime sky. Both are also available indi-vidually. The T5 lamps with multi-lamp tech-nology ensure a high level of energy efficiency, and this is further increased by the use of a controller luminaire with integral LIGHT-GATEplus light management.

An overview of the features• Diffuse light with high blue component

(sky white, 2 lamps) recreates the diffuse daytime sky

• Direct light with a higher colour temperature (neutral white, 1 lamp) corresponds to the direct ingress of sunlight

• Energy-efficient operation with daylight dependent control and presence detection

• Diffuse light with blue component can be adjusted at any time via simple push button operation

• Controller luminaire with integralLIGHTGATEplus control device

• Sensors suitable for surface-mounting and recess-mounting

• Connection of further DALI luminaires to the controller luminaire

• Setup of two DALI groups (neutral white and sky white) with separate control lines in broadcast operation. No DALI addressing required

• Setting of nominal value of illuminance level via rotary control at the sensor

Master luminaire

Sensor

Switch for room lighting

Push buttons (T2 and T4)

Switch for blackboard lighting

DALI 1+2Sensor 1

Sensor 2

Example: A normal class with Valuco Active – activating and energy-saving• Light with blue component with T2 wall switch

– Maximising via double click– Switching off by briefly pressing button– Individual dimming with pressing and

holding the button• Optional: Projection light with T4 wall switch

– Calling up by pressing of button– Switching off by pressing button again(The push button designations refer to connection according to the LIGHTGATEplus service instructions)

See Valuco Active, page 84 and LIGHTGATEplus, page 174

diffuse diffuse

direct

187

LMS DALI Dynamic Control


DALI Dynamic ControlLight management for lighting scenes and dynamics

DALI Dynamic Control enables a time-based cycle of lighting scenes in dynamic light se-quences. Ranging from accentuating colour chases intended to catch the attention of view-ers to discreet colour temperature changes that follow the example of natural daylight. Here several sequences can create a daytime cycle. Seven different daytime sequences can be called up on week days. The operating surface of the touch screen is application- oriented and can be configured and edited. Up to 128 connected luminaires can be variably controlled in a maximum of 16 groups. With the control of coloured (RGBW) sources, a maximum of 32 luminaires can create up to 4 zones of various light colours. The assign-ment of the groups, or colours and zones, is via touch screen, where DALI group addresses are assigned to the connected ballasts. DALI Dynamic Control is therefore also especially intended for the operation of LED luminaires requiring RGB colour mixing via the DALI interface to be addressed (e.g. Solvan···LED RGB, Quadrial···LED RGB, Polaron···LED RGB). For the control of RGBW light ceilings (Plenar···RGBW···), DALI repeaters can be optionally addressed with regard to colours and zones. DALI connection of the luminaires to the repeaters is for broadcast operation. The system configuration can also be carried out via a PC with a system infrared interface or ethernet connection, in addition to using a touch screen. The assumption of system con-figurations is also possible with this method via upload and download.

The advantages• Free design of lighting scenes

(max. 16 scenes)• Free RGBW colour setting in 4 zones• Simple programming of dynamic lighting

scenes (max. 99 sequences)• Changing lighting sequences during course

of day• Weekly cycle with 7 different daytime cycles• Structural menu guidance on touch screen• DALI group addressing via touch screen

(max. 16 groups)• Connection of up to 128 DALI luminaires

(white)• Connection of up to 32 luminaires for colour

mixing (RGBW)• Up to 4 zones with various RGBW mixed

colours• Upload and download via Ethernet.• Flat wall surface-mounted device.

LMS DALI Dynamic Control• Wall-mounted device (200 x 150 x 20 mm)• External device mains power• Power supply unit included in scope of supply• 2 DALI connections each for 64 DALI ballasts• External DALI power supplies required• Computer connection via system IR interface

or ethernet

LMS DALI SC-A• Push button coupler as auxiliary control unit

to LMS DALI Dynamic Control• Connection via DALI interface• Connection of up to 4 installation buttons

(open contact)• For calling up to 4 static lighting scenes

LMS DALI PS• Power supply unit for accommodation in a

cavity (cavity wall, intermediate ceiling)• For mains power of DALI interface for up to

64 ballasts• Operation via mains supply

LMS DALI PS-REG• Power supply unit for accommodation in

sub-distribution• For mains power of DALI interface for up to

64 ballasts• Operation via mains supply

Designation TOC Description LMS DALI Dynamic Control 59 077 00 Light management system

for dynamic applicationsLMS DALI PS 59 075 00 DALI power supply

for recess/surface-mountingLMS DALI PS-REG 59 076 00 DALI power supply

for installing in switching cabinetLMS DALI SC-A 59 797 00 Push button module

for calling up lighting scenes

188

Easy IR RMC

Easy IR CI

Easy Hybrid Remote Easy Color Drive

Easy RC Easy PB Coupler Easy PC Kit

PC

Easy SYS CP

DALI DALI

DALI Easy

DALI

DALI EasyLight management for colour-dynamic lighting accents

System featuresDALI Easy is a light management system especially designed for the simple control of colour-dynamic lighting accents. Operation, installation and start-up of the system are simply optimised. The basic functions of the system are completely available via a concise infrared remote control. Additionally (or alter-natively), up to 16 installation buttons can be assigned various functions. The radio opera-tion elements offer expanded functionality. The Easy Color Control software and a USB adapter enable complete access to all param-eters, and allow flexible system configuration, with the setting up of 4 dynamic lighting sequences with up to 16 zones with various colour settings. DALI Easy combines the oper-ation of DALI luminaires on the DALI Easy

control device with LED luminaires to give a complete control concept. DALI Easy can also be used without LED luminaires, e.g. for convenient dynamic control of general lighting with up to 4 luminaire groups. This could be a white-white control of different colour tem-peratures or an RGBW control (e.g. with Valuco Active or Plenar). TRILUX light ceilings from the Plenar series are fundamentally equipped with separate DALI connector terminals per light colour for DALI broadcast operation.

The advantages• Unified control for LED accents and general

lighting with fluorescent lamps• Flexible lighting scene control • Up to 4 dynamic sequences can be called up• Sequences can be individually configured • Simple operation• Broadcast operation of DALI ballasts • Connection of all system components via

RJ11 connectors• Up to 16 LED or DALI Easy control devices in

one system• Simple start-up

Operating element

DALI Easy system overview

Movement detector

Control device

Lamp ballast (ECG)

Light source

Push button

189Further information at www.trilux.co.uk/lm

DALI EasySystem luminaires

System luminairesEasy system luminaires are offered for the Quadrial···LED··· and Solvan···LED··· luminaire ranges. These include an LED-Easy ballast. The fluorescent lamps in the luminaires are operated on DALI ECGs that can additionally be integrated into the system via a DALI Easy ballast. The DALI Easy ballast can also be supplied integrated in a master luminaire on request. The LED-Easy components for the system luminaires are interconnected via RJ11 connectors.

• System luminaires with RJ11 connectors for LED control (···EDD + LED-Easy)

• Common control of fluorescent and LED sources

• Installation of DALI Easy ballast in master luminaires on request

• Master luminaires from other series for control of lighting scenes on request

Control of Quadrial ···LED-Easy (max. 15 pieces)

Control of fluorescent lamps of Quadrial ···EDD (max. 32 pieces)

L

N

Easy signal

GND (-)CH4+ (W)

CH3+ (B)CH2+ (G)

CH1+ (R)

DALI Easy

Infra-red receiver

LED

Fluorescent lamps

Luminaire in slave operation

Luminaire in slave operation

Electrical connection

190

LMS Easy IR RMCLMS Easy IR CI

LMS Easy IR SKLMS DALI Easy

LMS Easy CI Box

LMS DALI Easy• Control device for dynamic control of

DALI ballasts• Separate connection of up to 4 luminaire

groups (e.g. RGBW), broadcast operation• Maximum of 32 DALI ballasts• No DALI addressing

LMS Easy CI Box• Mounting box for DALI Easy control device• For VDE-compliant connection in ceiling or

cavity wall• Can also be used for DALI repeaters

LMS Easy PC Kit• USB adapter and Easy Color Control

software ( CD-ROM)• Free programming of up to 4 x 16 lighting

scenes• Free programming of 4 sequences each with

up to 16 different lighting scenes• Upload and download of sequences

LMS Easy SYS CP • System coupler for coupling of a further

EASY system• Maximum of 4 systems can be connected• Maximum of 64 control devices in 16 zones

LMS Easy IR RMC • Infrared remote control for DALI Easy• Manual dimming of 4 channels (e.g. RGBW)• Programming and calling up of 4 lighting

scenes• Programming and calling up of one

sequence

LMS Easy IR CI• IR receiver for installation in ceiling• For reception of LMS Easy IR RMC

LMS Easy IR SK• Surface-mounting set for LMS Easy IR CI

DALI EasySystem components

191

LMS Easy Hybrid Remote LMS Easy Color DriveLMS Easy IR PB Coupler


Designation TOC Description LMS DALI Easy 53 172 00 Control deviceLMS Easy CI Box 53 167 00 Mounting boxLMS Easy IR RMC 48 343 00 IR remote controlLMS Easy IR CI 52 787 00 Recessed ceiling sensorLMS Easy IR SK 52 788 00 Surface-mounting setLMS Easy PB Coupler 53 163 00 Push button couplerLMS Easy Hybdrid Remote 59 729 00 Hand transmitterLMS Easy Color Drive 59 728 00 Wall operating elementLMS Easy RC 59 930 00 Radio receiverOT 6/200-240/24 59 730 00 24V DC power supplyLMS Easy PC Kit 53 214 00 Easy Color Control software with USB adapterLMS Easy SYS CP 58 431 00 System coupler for connection of several systemsLMS Y-Connector 58 482 00 Y-branching for system expansion (RJ11)

LMS Easy Color Drive• Radio wall operating element • For operating a system with RGBW, RGB or

white-white control• Switching and dimming• Setting of one colour• Calling up of one sequence• OT 6/200-240/24 mains power required

LMS Easy RC• Radio receiver for LMS Easy Color Drive and

LMS Easy Hybrid Remote• Simple addressing per button• Up to 8 operating elements are recognised

LMS Easy Hybrid Remote• Radio hand remote control with wall bracket • For operating a system with RGBW, RGB or

white-white control• Switching and dimming• Setting of one colour• Calling up and saving of 8 from 4x16 lighting

scenes• Calling up of 4 sequences• Four sequences each with up to 16 lighting

scenes can be programmed with the LMS Easy PC Kit

• OT 6/200-240/24 mains power required

LMS Easy IR PB coupler• Push button coupler for connection of up to

8 installation buttons to a DALI Easy control device

• Switching and dimming• For calling up and saving up to 8 from

16 lighting scenes• Calling up of up to 4 sequences• One sequence can be programmed with the

LMS Easy IR RMC and receiver• Four sequences can be programmed with

the LMS Easy PC Kit

192

TOC – TRILUX ORDER CODE

Designation TOC ···E ···EDD

7651/35/49/80··· 59 194··· ···04 ···077652/35/49/80··· 59 198··· ···04 ···07

TOC Abbreviation Meaningending00 Accessories01 L Inductive02 K Power factor-corrected04 E Electronic control gear (ECG)05 ED ECG dimmable 07 EDD ECG dimmable DALI08 EDS ECG dimmable with sensor

TOC Abbreviation Meaningending10 Mains connection, direct11 ESD ECG dimmable DSI40 ET Electronic transformer42 ECG + electronic transformer50 Requires further components51 Electronic transformer DALI (RGB)54 Combination of several switching types

This catalogue has been given the TOC (TRILUX ORDER CODE) order number system to aid efficient order processing. All luminaire designations and system components are given a seven-character TOC number.

For luminaires and gear trays for continuous lines, the five-character basis number is given a two-character number for designation of the electrical equipment level.

Example from a catalogue page with E-Line T5N gear trays

Legend for switching variants, TOC

Example for TOC useLuminaire designation: 7651/35/49/80 EDDComplete TOC number: 59 194 07

The EDD designation in the luminaire desig-nation (for dimmable DALI electronic ballast) is found in this example with the 07 ending. We request that you only use the complete

seven-character TOC number for the unam-biguous designation of luminaires, gear trays and system components with all orders.

193

T5

Lamp data, indoor

Lamp PL L ¶ LF Ra OSRAM Philips Sockettype designation ECG designation ECG

� (Im) � (Im)W mm mm ≥ � (cd)2) � (cd)2)

T 16 14 549 16 ww 80 FH 14W/827 HE 1200 TL5 HE 14W/827 1200 G5T 16 14 549 16 ww 80 FH 14W/830 HE 1200 TL5 HE 14W/830 1200 G5T 16 14 549 16 nw 80 FH 14W/835 HE 1200 - - G5T 16 14 549 16 nw 80 FH 14W/840 HE 1200 TL5 HE 14W/840 1200 G5T 16 14 549 16 tw 80 FH 14W/865 HE 1100 TL5 HE 14W/865 1100 G5T 16 14 549 16 tw 80 FH 14W/880 HE 1050 - - G5T 16 24 549 16 ww 80 FQ 24W/827 HO 1750 TL5 HO 24W/827 1750 G5T 16 24 549 16 ww 80 FQ 24W/830 HO 1750 TL5 HO 24W/830 1750 G5T 16 24 549 16 nw 80 FQ 24W/835 HO 1750 - - G5T 16 24 549 16 nw 80 FQ 24W/840 HO 1750 TL5 HO 24W/840 1750 G5T 16 24 549 16 tw 80 FQ 24W/865 HO 1600 TL5 HO 24W/865 1650 G5T 16 24 549 16 tw 80 FQ 24W/880 HO 1550 - - G5T 16 24 549 16 nw 90 FQ 24W/940 1400 TL5 HO 24W/940 1400 G5T 16 24 549 16 nw 90 - - TL5 HO 24W/950 1400 G5T 16 24 549 16 tw 90 FQ 24W/965 1400 TL5 HO 24W/965 1400 G5T 16 21 849 16 ww 80 FH 21W/827 HE 1900 TL5 HE 21W/827 1900 G5T 16 21 849 16 ww 80 FH 21W/830 HE 1900 TL5 HE 21W/830 1900 G5T 16 21 849 16 nw 80 FH 21W/835 HE 1900 - - G5T 16 21 849 16 nw 80 FH 21W/840 HE 1900 TL5 HE 21W/840 1900 G5T 16 21 849 16 tw 80 FH 21W/865 HE 1750 TL5 HE 21W/865 1750 G5T 16 21 849 16 tw 80 FH 21W/880 HE 1700 - - G5T 16 39 849 16 ww 80 FQ 39W/827 HO 3100 TL5 HO 39W/827 3100 G5T 16 39 849 16 ww 80 FQ 39W/830 HO 3100 TL5 HO 39W/830 3100 G5T 16 39 849 16 nw 80 FQ 39W/835 HO 3100 - - G5T 16 39 849 16 nw 80 FQ 39W/840 HO 3100 TL5 HO 39W/840 3100 G5T 16 39 849 16 tw 80 FQ 39W/865 HO 2850 TL5 HO 39W/865 2900 G5T 16 39 849 16 tw 80 FQ 39W/880 HO 2750 G5T 16 28 1149 16 ww 80 FH 28W/827 HE 2600 TL5 HE 28W/827 2600 G5T 16 28 1149 16 ww 80 FH 28W/830 HE 2600 TL5 HE 28W/830 2600 G5T 16 28 1149 16 nw 80 FH 28W/835 HE 2600 - - G5T 16 28 1149 16 nw 80 FH 28W/840 HE 2600 TL5 HE 28W/840 2600 G5T 16 28 1149 16 tw 80 FH 28W/865 HE 2400 TL5 HE 28W/865 2400 G5T 16 28 1149 16 tw 81 FH 28W/880 HE 2350 G5T 16 54 1149 16 ww 80 FQ 54W/827 HO 4450 TL5 HO 54W/827 4450 G5T 16 54 1149 16 ww 80 FQ 54W/830 HO 4450 TL5 HO 54W/830 4450 G5T 16 54 1149 16 nw 80 FQ 54W/835 HO 4450 - - G5T 16 54 1149 16 nw 80 FQ 54W/840 HO 4450 TL5 HO 54W/840 4450 G5T 16 54 1149 16 tw 80 FQ 54W/865 HO 4100 TL5 HO 54W/865 4250 G5T 16 54 1149 16 tw 80 FQ 54W/880 HO 4000 - - G5T 16 54 1149 16 nw 90 FQ 54W/940 3800 TL5 HO 54W/940 3800 G5T 16 54 1149 16 nw 90 - - TL5 HO 54W/950 3800 G5T 16 54 1149 16 tw 90 FQ 54W/965 3800 TL5 HO 54W/965 3800 G5T 16 35 1449 16 ww 80 FH 35W/827 HE 3300 TL5 HE 35W/827 3300 G5T 16 35 1449 16 ww 80 FH 35W/830 HE 3300 TL5 HE 35W/830 3300 G5T 16 35 1449 16 nw 80 FH 35W/835 HE 3300 - - G5T 16 35 1449 16 nw 80 FH 35W/840 HE 3300 TL5 HE 35W/840 3300 G5T 16 35 1449 16 tw 80 FH 35W/865 HE 3050 TL5 HE 35W/865 3100 G5T 16 35 1449 16 tw 81 FH 35W/880 HE 3000 - - G5T 16 49 1449 16 ww 80 FQ 49W/827 HO 4300 TL5 HO 49W/827 4300 G5T 16 49 1449 16 ww 80 FQ 49W/830 HO 4300 TL5 HO 49W/830 4300 G5T 16 49 1449 16 nw 80 FQ 49W/835 HO 4300 - - G5T 16 49 1449 16 nw 80 FQ 49W/840 HO 4300 TL5 HO 49W/840 4300 G5T 16 49 1449 16 tw 80 FQ 49W/865 HO 4100 TL5 HO 49W/865 4100 G5T 16 49 1449 16 tw 80 FQ 49W/880 HO 4050 - - G5T 16 49 1449 16 nw 90 FQ 49W/940 3700 TL5 HO 49W/940 3700 G5T 16 49 1449 16 nw 90 - - TL5 HO 49W/950 3700 G5T 16 49 1449 16 tw 90 FQ 49W/965 3700 TL5 HO 49W/965 3700 G5T 16 80 1449 16 ww 80 FQ 80W/827 HO 6150 TL5 HO 80W/827 6150 G5T 16 80 1449 16 ww 80 FQ 80W/830 HO 6150 TL5 HO 80W/830 6150 G5T 16 80 1449 16 nw 80 FQ 80W/835 HO 6150 - - G5T 16 80 1449 16 nw 80 FQ 80W/840 HO 6150 TL5 HO 80W/840 6150 G5T 16 80 1449 16 tw 80 FQ 80W/865 HO 5700 TL5 HO 80W/865 5850 G5T 16 80 1449 16 tw 80 FQ 80W/880 HO 5550 - - G5T 16 80 1449 16 nw 90 FQ 80W/940 5500 - - G5T 16 80 1449 16 tw 90 FQ 80W/965 5500 - - G5

* All luminous flux specifications related to 25 °C.

PL = Lamp ratingL = Lamp length¶ = Lamp diameterLF = Lamp colourRa = Colour rendering indexEVG = Electronic control gear

194

T5

Lamp data, indoor

Lamp PL L ¶ LF Ra OSRAM Philips Sockettype designation ECG designation ECG

� (Im) � (Im)W mm mm ≥ � (cd)2) � (cd)2)

T16 coloured 14 549 16 Red - FH 14W/60 HE 930 TL5 HE 14W/150 900 G5T16 coloured 14 549 16 Green - FH 14W/66 HE 1550 TL5 HE 14W/170 1675 G5T16 coloured 14 549 16 Blue - FH 14W/67 HE 300 TL5 HE 14W/180 310 G5T16 coloured 24 549 16 Red - FQ 24W/60 HO 1500 TL5 HO 24W/150 1400 G5T16 coloured 24 549 16 Green - FQ 24W/66 HO 2500 TL5 HO 24W/170 2750 G5T16 coloured 24 549 16 Blue - FQ 24W/67 HO 525 TL5 HO 24W/180 550 G5T16 coloured 21 849 16 Red - FH 21W/60 HE 1500 - - G5T16 coloured 21 849 16 Green - FH 21W/66 HE 2500 - - G5T16 coloured 21 849 16 Blue - FH 21W/67 HE 500 - - G5T16 coloured 39 849 16 Red - FQ 39W/60 HO 2450 - - G5T16 coloured 39 849 16 Green - FQ 39W/66 HO 4100 - - G5T16 coloured 39 849 16 Blue - FQ 39W/67 HO 850 - - G5T16 coloured 28 1149 16 Red - FH 28W/60 HE 2100 TL5 HO 28W/150 1800 G5T16 coloured 28 1149 16 Green - FH 28W/66 HE 3500 TL5 HO 28W/170 3350 G5T16 coloured 28 1149 16 Blue - FH 28W/67 HE 700 TL5 HO 28W/180 625 G5T16 coloured 54 1149 16 Red - FQ 54W/60 HO 3450 TL5 HO 54W/150 3450 G5T16 coloured 54 1149 16 Green - FQ 54W/66 HO 6300 TL5 HO 54W/170 6900 G5T16 coloured 54 1149 16 Blue - FQ 54W/67 HO 1200 TL5 HO 54W/180 1500 G5T16 coloured 35 1449 16 Red - FH 35W/60 HE 2650 - - G5T16 coloured 35 1449 16 Green - FH 35W/66 HE 4450 - - G5T16 coloured 35 1449 16 Blue - FH 35W/67 HE 875 - - G5T16 coloured 80 1449 16 Red - FQ 80W/60 HO 4525 - - G5T16 coloured 80 1449 16 Green - FQ 80W/66 HO 7650 - - G5T16 coloured 80 1449 16 Blue - FQ 80W/67 HO 1550 - - G5

Lamp PL L Ø LF Ra OSRAM Philips Socket type designation designation ECG

� (Im)W mm mm ≥ � (cd)2)

TC-TEL(I) 13 90 49 ww 80 DULUX T/E 13W/827 PLUS Master PL-T 13W/827/4P 900 GX24q-1TC-TEL(I) 13 90 49 ww 80 DULUX T/E 13W/830 PLUS Master PL-T 13W/830/4P 900 GX24q-1TC-TEL(I) 13 90 49 nw 80 DULUX T/E 13W/840 PLUS Master PL-T 13W/840/4P 900 GX24q-1TC-TEL(I) 18 100 49 ww 80 DULUX T/E 18W/827 (IN) PLUS Master PL-T 18W/827/4P 1200 GX24q-2TC-TEL(I) 18 100 49 ww 80 DULUX T/E 18W/830 (IN) PLUS Master PL-T 18W/830/4P(TOP) 1200 GX24q-2TC-TEL(I) 18 100 49 nw 80 DULUX T/E 18W/840 (IN) PLUS Master PL-T 18W/840/4P(TOP) 1200 GX24q-2TC-TEL(I) 26 115 49 ww 80 DULUX T/E 26W/827 (IN) PLUS Master PL-T 26W/827/4P 1800 GX24q-3TC-TEL(I) 26 115 49 ww 80 DULUX T/E 26W/830 (IN) PLUS Master PL-T 26W/830/4P(TOP) 1800 GX24q-3TC-TEL(I) 26 115 49 nw 80 DULUX T/E 26W/840 (IN) PLUS Master PL-T 26W/840/4P(TOP) 1800 GX24q-3TC-TEL(I) 32 130 49 ww 80 DULUX T/E 32W/827 (IN) PLUS Master PL-T 32W/827/4P(TOP) 2400 GX24q-3TC-TEL(I) 32 130 49 ww 80 DULUX T/E 32W/830 (IN) PLUS Master PL-T 32W/830/4P(TOP) 2400 GX24q-3TC-TEL(I) 32 130 49 nw 80 DULUX T/E 32W/840 (IN) PLUS Master PL-T 32W/840/4P(TOP) 2400 GX24q-3TC-TEL(I) 42 155 49 ww 80 DULUX T/E 42W/827 (IN) PLUS Master PL-T 42W/827/4P(TOP) 3200 GX24q-4TC-TEL(I) 42 155 49 ww 80 DULUX T/E 42W/830 (IN) PLUS Master PL-T 42W/830/4P(TOP) 3200 GX24q-4TC-TEL(I) 42 155 49 nw 80 DULUX T/E 42W/840 (IN) PLUS Master PL-T 42W/840/4P(TOP) 3200 GX24q-4

* All luminous flux specifications related to 25 °C.(IN) and (TOP) alternatively also with amalgam technology for increased ambient temperatures. IN and TOP without brackets are versions only available with amalgam technology.

195

* All luminous flux specifications related to 25 °C.2) Illuminance in cd.

Lamp PL L ¶ LF OSRAM Philips Sockettype designation designation

� (Im) � (Im)W mm mm � (cd)2) � (cd)2)

Metal halide lamps, tubular form (CE with ceramic arc tube, only for sealed luminaires)HIT-TC-CE 20 52 17 ww - - MASTERcolour CDM-Tm Mini 20W/830 1650 PGJ5HIT-TC-CE 20 52 15 ww HCI-TC 20/830 WDL PB 1700 - - G8.5HIT-TC-CE 20 57 13 ww HCI-TF 20/830 WDL PB 1700 - - GU6.5HIT-TC-CE 35 85 15 ww HCI-TC 35/830 WDL PB 3500 MASTERcolour CDM-TC 35W/830 3300 G8.5HIT-TC-CE 35 85 15 ww HCI-TC 35/930 WDL PB Shoplight 2800 MASTERcolour CDM-TC Elite 35W/930 3500 G8.5HIT-TC-CE 35 85 15 nw HCI-TC 35/942 NDL PB 3400 MASTERcolour CDM-TC 35W/942 3300 G8.5HIT-TC-CE 35 57 13 ww HCI-TF 35/930 WDL PB 3400 - - GU6.5HIT-TC-CE 35 52 17 ww - - MASTERcolour CDM-Tm Mini 35W/930 3000 PGJ5HIT-TC-CE 70 85 15 ww HCI-TC 70/830 WDL PB 6900 MASTERcolour CDM-TC 70W/830 6400 G8.5HIT-TC-CE 70 85 15 ww HCI-TC 70/930 WDL PB Shoplight 6200 MASTERcolour CDM-TC Elite 70W/930 7300 G8.5HIT-TC-CE 70 85 15 nw HCI-TC 70/942 NDL PB 6600 MASTERcolour CDM-TC 70W/942 5900 G8.5

HIT-CE 35 105 20 ww HCI-T 35/830 WDL PB 3600 MASTERcolour CDM-T 35W/830 3300 G12HIT-CE 35 105 20 ww HCI-T 35/930 WDL PB Shoplight 2800 MASTERcolour CDM-T Elite 35W/930 3500 G12HIT-CE 35 105 20 nw HCI-T 35/942 NDL PB 3500 MASTERcolour CDM-T 35W/942 3300 G12HIT-CE 70 105 20 ww HCI-T 70/830 WDL PB 7300 MASTERcolour CDM-T 70W/830 6600 G12HIT-CE 70 105 20 ww HCI-T 70/930 WDL PB Shoplight 6300 MASTERcolour CDM-T Elite 70W/930 7300 G12HIT-CE 70 105 20 nw HCI-T 70/942 NDL PB 6800 MASTERcolour CDM-T 70W/942 6600 G12HIT-CE 150 110 25 ww HCI-T 150/830 WDL PB 15000 MASTERcolour CDM-T 150W/830 14000 G12HIT-CE 150 110 25 nw HCI-T 150/942 NDL PB 14500 MASTERcolour CDM-T 150W/942 12700 G12


� (Im) � (Im)W mm mm � (cd)2) � (cd)2)

Low voltage halogen reflector lamps with cool beam reflectorQR-CBC 51 35 46 51 ww Decostar 51 48865 ES SP 10° 125002) MASTERline ES 35W 8° 135002) GU5.3QR-CBC 51 35 46 51 ww Decostar 51 48865 ES FL 24° 44002) MASTERline ES 35W 24° 44002) GU5.3QR-CBC 51 35 46 51 ww Decostar 51 48865 ES WFL 36° 22002) MASTERline ES 35W 36° 22002) GU5.3QR-CBC 51 35 46 51 ww Decostar 51 48865 ES VWFL 60° 11002) MASTERline ES 35W 60° 10502) GU5.3QR-CBC 51 35 46 51 ww Decostar 51 TITAN 46865SP 10° 80002) Brilliantline Dichroic 12V MR50 35W 10° 80002) GU5.3QR-CBC 51 35 46 51 ww Decostar 51 TITAN 46865FL 24° 31002) Brilliantline Dichroic 12V MR50 35W 24° 31002) GU5.3QR-CBC 51 35 46 51 ww Decostar 51 TITAN 46865WFL 36° 15002) Brilliantline Dichroic 12V MR50 35W 36° 15002) GU5.3QR-CBC 51 35 46 51 ww Decostar 51 TITAN 46865VWFL 60° 7002) Brilliantline Dichroic 12V MR50 35W 60° 7002) GU5.3QR-CBC 51 35 46 51 ww Decostar 51S 44865 SP 10° 60002) Accentline 35W 12V 10° 37502) GU5.3QR-CBC 51 35 46 51 ww Decostar 51S 44865 WFL 36° 10002) Accentline 35W 12V 36° 10002) GU5.3QR-CBC 51 50 46 51 ww Decostar 51 48870 ES SP 10° 150002) MASTERline ES 45W 8° 160002) GU5.3QR-CBC 51 50 46 51 ww Decostar 51 48870 ES FL 24° 57002) MASTERline ES 45W 24° 54502) GU5.3QR-CBC 51 50 46 51 ww Decostar 51 48870 ES WFL 36° 28502) MASTERline ES 45W 36° 28502) GU5.3QR-CBC 51 50 46 51 ww Decostar 51 48870 ES VWFL 60° 14302) MASTERline ES 45W 60° 13002) GU5.3QR-CBC 51 50 46 51 ww Decostar 51 TITAN 46870SP 10° 125002) Brilliantline Dichroic 12V MR50 50W 10° 130002) GU5.3QR-CBC 51 50 46 51 ww Decostar 51 TITAN 46870FL 24° 44002) Brilliantline Dichroic 12V MR50 50W 24° 44002) GU5.3QR-CBC 51 50 46 51 ww Decostar 51 TITAN 46870WFL 36° 22002) Brilliantline Dichroic 12V MR50 50W 36° 22002) GU5.3QR-CBC 51 50 46 51 ww Decostar 51 TITAN 46870VWFL 60° 12002) Brilliantline Dichroic 12V MR50 50W 60° 11002) GU5.3QR-CBC 51 50 46 51 ww Decostar 51S 44870 SP 10° 78002) Accentline 50W 12V 10° 62002) GU5.3QR-CBC 51 50 46 51 ww - Accentline 50W 12V 24° 21002) GU5.3QR-CBC 51 50 46 51 ww Decostar 51S 44870 WFL 36° 14502) Accentline 50W 12V 36° 15002) GU5.3

196

Lamp data, indoor

* All luminous flux specifications related to 25 °C.2) Illuminance in cd.


� (Im) � (Im)W mm mm � (cd)2) � (cd)2)

Low voltage halogen reflector lamps with aluminium reflectorQR-LP 111 35 / 30 63 111 ww Halospot 111 41832 SP 4° 350002) - - G53QR-LP 111 35 / 30 63 111 ww Halospot 111 48832 ES SP 8° 225002) MASTERline 111 30W 8° 230002) G53QR-LP 111 35 / 30 63 111 ww Halospot 111 48832 ES FL 24° 45002) MASTERline 111 30W 24° 40002) G53QR-LP 111 50 / 45 63 111 ww Halospot 111 41835 SSP 4° 400002) - - G53QR-LP 111 50 / 45 63 111 ww Halospot 111 48835 ES SP 8° 330002) MASTERline 111 45W 8° 330002) G53QR-LP 111 50 / 45 63 111 ww Halospot 111 48835 ES FL 24° 58002) MASTERline 111 45W 24° 53002) G53QR-LP 111 50 / 45 63 111 ww Halospot 111 48835 ES WFL 45° 20002) MASTERline 111 45W 45° 19002) G53QR-LP 111 65 / 60 63 111 ww Halospot 111 48837 ES SP 8° 450002) MASTERline 111 60W 8° 480002) G53QR-LP 111 65 / 60 63 111 ww Halospot 111 48837 ES FL 24° 85002) MASTERline 111 60W 24° 85002) G53QR-LP 111 65 / 60 63 111 ww Halospot 111 48837 ES WFL 45° 28002) MASTERline 111 60W 45° 28002) G53Low voltage pin base lamps, 12 V electronic transformer (orientation values for Psys)QT 12-ax 20 44 12 ww Halostar Starlite 64427S 300 Capsuleline 300 GY6.35QT 12-ax 35 44 12 ww Halostar Starlite 64432S 600 Capsuleline 600 GY6.35QT 12-ax 50 44 12 ww Halostar Starlite 64440S 910 Capsuleline 950 GY6.35QT 12-ax 75 44 12 ww Halostar Starlite 64450S 1450 Capsuleline 1575 GY6.35QT 12-ax 90 44 12 ww Halostar Starlite 64458S 1800 - - GY6.35QT 12-ax 100 44 12 ww - - Capsuleline 2200 GY6.35High voltage halogen lamps, no transformer requiredQT 32 60 105 33 ww Halolux Ceram 64472IM 790 HalogenA 230V T32 840 E27QT 32 75 105 33 ww Halolux Ceram 64474IM 1050 - - E27QT 32 100 105 33 ww Halolux Ceram 64476IM 1470 HalogenA 230V T32 1550 E27QT 32 150 105 33 ww Halolux Ceram 64478IM 2400 HalogenA 230V T32 2550 E27QT 32 250 105 33 ww Halolux Ceram 64480IM 4210 - - E27

Lamp PL L ¶ LF LEDON Philips Sockettype designation designation

� (Im) � (Im)W mm mm � (cd)2) � (cd)2)

High power LEDLED Retrofit-Lamp in AGL Form 5 115 56 ww 5W LED Lamp (3050K) 290 - - E27LED Retrofit-Lamp in AGL Form 6 115 56 ww 6W LED Lamp (2900K) 340 - - E27LED Retrofit-Lamp in AGL Form 6 115 56 ww 6W LED Lamp (2900K) dimmable 340 - - E27LED Retrofit-Lamp in AGL Form 6 106 55 ww - - Master LEDbulb 6W E27 2700K 230V A55 240 E27LED Retrofit-Lamp in AGL Form 7 109 60 ww - - Master LEDbulb 7W E27 2700K 230V A60 400 E27

197

Designation Page

ActisonActison RSX··· 164Actison RWS··· 164Actison STB··· 166Actison S-RSX··· 164Actison S-RWS··· 164Actison S-STB··· 166ActisonPlus RSX··· 164ActisonPlus RWS··· 164ActisonPlus STB··· 166ActisonPlus S-RSX··· 164ActisonPlus S-RWS··· 164ActisonPlus S-STB··· 166

AlinioAlinio··· 116

Aragon LEDAragon LED··· 160

Athenik LEDAthenik···LED··· 10

DurataDurata···HR··· 126Durata···HR-IP··· 126Durata···SB··· 126Durata···SB-IP··· 126

EnspiroEnspiro H LED··· 72

InperlaInperla C2 HR-Ag··· 15Inperla C2 HR LED··· 14

LiventyLiventy 300 OT··· 110Liventy 600 OT··· 110Liventy 600 UXP-S OT··· 110Liventy 625 OT··· 110Liventy 625 UXP-S OT··· 110Liventy Flat 600 OT··· 110Liventy Flat 625 OT··· 110

LMSLMS ActiLume 180LMS DALI Dynamic Control 187LMS DALI Easy 188LMS DALI Poti 185LMS DALI Repeater 185LMS Dim Pico 184LMS LIGHTGATEbasic 178LMS LIGHTGATEplus 174LMS Luxomat 182Valuco Active 186

MironaMirona MR LED··· 122Mirona MRA LED··· 122

NeximoNeximo H1 LED··· 68Neximo H2 LED··· 68

OnperlaOnperla D2 BR··· 24Onperla D2 HR··· 24Onperla D2 HR···LED-RGB··· 24Onperla D2 HR IP··· 24Onperla D2 MR··· 24

Designation Page

Scenatic FlairSncFlair 100··· 52SncFlair 200··· 52SncFlair 300··· 52SncFlair 400 54SncFlair 400···LED··· 54SncFlair 500··· 54SncFlair 500···LED··· 54

Scenatic FlexSncFlex 100··· 48SncFlex 200··· 48SncFlex 300··· 48SncFlex 400··· 50SncFlex 500... 50

Scenatic PointSncPoint 100··· 36SncPoint 200··· 36SncPoint 300··· 40SncPoint 300···LED··· 39SncPoint 400··· 40SncPoint 5··· 42SncPoint 6··· 42SncPoint 700···LED··· 44SncPoint 800··· 46

Scenatic WallSncWall 100··· 56

circuit track 58

SolvanSolvanB H1 OTA··· 76SolvanB H1 UXP-H··· 78SolvanB H1 UXP-S··· 78SolvanB H2 UXP-AD··· 78Solvan C1-L OA-PC···LED-Easy··· 104Solvan C1-L OTA···LED-Easy··· 104

ValucoValuco S··· 82Valuco D··· 86Valuco D-UXP··· 86Valuco H··· 88ValucoAct D-UXP··· 84

Series 504···, 505···504···RAV··· 93504···RPX··· 92504···RPXA··· 93504···RSX··· 92504···RSXA··· 93505···RPX··· 94505···RSX··· 95

Series 740···7402N/LED··· 98

Series 765··· (E-Line)gear tray7651··· 1327652··· 1327654··· 144trunking07650··· 152

Product Index

All technical data including dimensional and weight specifications have been checked carefully. Errors excepted. Possible colour deviations are due to printing processes. We reserve the right to modify in the interest of progress. Luminaires are partly shown with accessories that must be ordered separately. Images of installations may show custom manufactured luminaires. Printed on PEFC-certified paper in an environmentally friendly way.

198

TRILUX GmbH & Co. KGHeidestraße · D-59759 ArnsbergPostfach 19 60 · D-59753 ArnsbergTel. +49 (0) 29 32.3 01-0Fax +49 (0) 29 32.3 01-3 [email protected] · www.trilux.com

TRILUX LlGHTING LlMITEDTRILUX HOUSE, Winsford WayBoreham InterchangeChelmsford, EssexCM2 5PD Tel. +44 (0) 12 45.46 34 63Fax +44 (0) 12 45.46 26 [email protected] · www.trilux.co.uk

Contacts

105-GB-int 082 773

The new TRILUX products for 2010 have arrived

Documents

Transcript of The new TRILUX products for 2010 have arrived