products - Canadian Engravers

LaseraBLeproducts

ceramicglass

leathermarble

metalplasticrubber

tilewood

LaseraBLe

Laserable Sample Kits • Photos not representative of contents.

LAS-TIL-KITkit Tile & Marble Kit

See page 34

Travel Mug Kit(w/ handle)

LAS-TRV-SET

kit

See page 38

LAS-SHT-KIT2kit Plastic Sheets Kit

See page 60

LAS-PLT-KIT

kit Metal Plates Kit

See page 24

LAS-MTL-KITkit Metal Sheets Kit

See page 51

kit Square Mug Kit

LAS-MUG-KIT6

See page 35

Travel Mug Kit(w/o handle)

LAS-TRVC-SET

kit

See page 38

kit

LAS-MUG-KITR8

Round Mug Kit

See page 35

kit

LAS-WTR-SET 17 oz.LAS-WTR2-SET 25 oz.

Water Bottle Kit

See page 37

LAS-PEN-KIT2kit Pens Kit

See page 39

LAS-LEA-KIT

kit Leather Kit

See page 9

kit Rounded Corner Mug Kit

LAS-MUG-KITRC7

See page 36

LAS-THM-SET

kit Vacuum Insulated Bottle Kit

See page 37

LAS-PLQ-KIT

kit Plaque Kit

See page 14 LAS-WDS-KIT

kit Wood Strips Kits

See page 9

LWD-AST-KIT

kit Wood Thins Kit

See page 9

LWD-THN-KIT

kit Glass Ornament Contemporary KitLAS-ORNG-CONT

kit Glass OrnamentSpecial OccasionLAS-ORNG-SPEC

See page 33

kit Glass Ornament Kit LAS-ORN-OPT

kit Glass OrnamentTraditional KitLAS-ORNG-TRAD

See page 33

Anodized Tags Kit

Rubber Stamps Kit

LAS-TGA-KIT2 LAS-RBR-KIT2LAS-RBR-KIT3 (Large)

See page 44 See page 47

kit kit

ALBeRTA Office: Tel: 403-250-6774 or 877-775-6774 Fax: 403-250-7718email: [email protected] Web sites: www.cesco.ca • www.laserstuff.ca

Laserable Sample Kits

1

OnTARIO Office: Tel: 905-795-1262 or 877-795-1262 Fax: 905-795-0219 or 800-632-3726email: [email protected] Web sites: www.cesco.ca • www.laserstuff.ca

N neck Ribbons 46nOVUS™ Acrylic Polisher 29O Ornaments 33P Paint Kits 21Paperweights 32,34Pens / Pen Cases 5-6,39-40Pet Tags 44,56,58Picture Frames 11-12Plaque Accessories 18Plaque Plates 23-26,55,58Plaques 13-17Plastic Sheets 59-66Poly Bags 18Pouches (foam) 18Pre-Mask Tape 17,19Presentation Boxes 18Promotional Items 35-43

R Rowmark® Colour Chart 64Rowmark® Plastic 59-64Rowmark® Pre-made Sign Kits 67Rowmark® Swatch Book 64Rubber 47Rubber Stamps & Ink 48Rub ‘n Buff® 34

S Screws / nails 18Seklema™ Mat 20,46Self-Inking Stamps 48,50Sign Kits 67Slide-In Frame Plaques 12Software 3-4Split Rings, S-hooks 44,58 Stainless Steel Products 52,58Steel Sheets 52

T Tags - Anodized, Stainless 9,42,44,58Tape 19-20Thermark™ 57Thermos 37Tiles 34Travel Mugs 37-38

W Water Bottles 37Wine Boxes 5,7Wood Coasters 9Wood, Hardwood Collection 10Wood Products 5-10,39Wood Strips 9

Table of ContentsG Gavels 14,15G.I. Tags 44,46,58Glass Awards 30Glass Ornaments 33Granite Awards 27Granite Tiles 34I I.D. Tags 44,46,58Identifiers 59Innovative Plastics® Sheets 65-66Innovative Plastics® Swatch Binder 66Insulated Bottles (Thermos) 37

J Jump Rings 44,58

K Key Chains 41,43Kits 1,67L LaserBLAK™ & LaserWHITe™ 54LaserFrost™ 56Laser Jump Start™ Software 3LaserLIGHTS® 46,64LASeRmag® 64Laser Marble Sheets 51-52Laser Rubber / Polymer 47Laser Safety Goggles 67Laser Steel Sheets 52LaserSub™ Aluminum Sheets 51LaserSub™ Steel Sheets 52LaserTape™ 19LazerDARK™ 16LazrCLeAn™ 47Leather 9Lens Clewaning Supplies 67License Plates 55,58Lighters 42LiquaMASK™ 19

M Magic Peel™ 20,52Marble Products 34Medallions 46Medals (Academic & Sports) 45Memory Sticks (USB Flash drives) 42Metal Disks & Plates 55-56Metal Marking Compound 57Metal Plaque Plates 23-26Metal Shear 22Metal Sheets 51-54Mirrored Glass Ornaments 33Money Clip 43Mugs 35-38 Multi-Mat™ 20,46

# 1-Touch Photo™ Software 43M™ Adhesive Transfer 20A Acrylic Desk Awards 16,27-29Acryfil Paint 21Adhesive Remover 20AlumaMark™ - Disks & Plates 56AlumaMark™ - Sheets 53Aluminum Sheets 51,53-54Anodized Aluminum Sheets 51Auxiliary equipment 22Award Glo / Cleaners 29-30Awards 27-32

B Badge Frames 59Bamboo Products 5,16BBQ Gift Set 5,7Beaded Chain 44Bells 15Bottle Openers 43Boxes 18,35Brass Sheets 51Bumps (clear) 18Business Cards & Cases 6,55-56

C Carabiners 43CerMark™ 57Ceramic Mugs 35-36Ceramic Tiles 34Coasters 5,9,34Corner Rounders & Dies 22Crystal Ornaments 33Crystal Awards 31-32Custom Cut Plates 55

D Date Stampers 49Delrin® 50Desk Bars 14-16,27,34Disks 56Display Boards 45-46,59DuraBlack™ Aluminum 54

E easels 18embossing Seals 50

F Felt Pads 18Flash Lights 42Flasks, Flask Set 8,36Foil Labels For Seals 50Fridge Magnets 16

2

NameIt Suite allows you to input list of names or numbers in seconds. This program compatible with Excel databases. NameIt Suite consists of three macros that function within CorelDraw. The functions include creating layouts of names and/or numbers and serialization.

Name-It™ Suite

FlexIt™ Suite FrameIt™ Suite

LJS-NAMS

BoxIt™ 2.0 Suite Software

The BoxIt Suite uses a design method of interlocking tabs, coupled with cutting kerf compensation. This allows you to create strong press fit parts or easy to assemble, loose fitting parts that require glue.

LJS-BOXES BoxIt Software LJS-LIC Additional Licenses

Designs that will help “Jump-Start” and promote the full capabilities of your laser. Each design is fully customizable.

Laser Jump Start™ Volume I

Laser Jump Start™ Volume III

Laser Jump Start™ Volume II

Laser Jump Start™ Volume IV

Contains over 60 designs that allow you to either build as is or re-design using your BoxIt Suite Program. Users now have a step-by-step project plan to follow, complete with screen shots and pictures.

LJS-V1

LJS-V3

LJS-FLX

LJS-V2

LJS-V4

Laser Jump Start Vol. III contains over 24 BoxIt Suite Point-of-Sale Designs that allow you to either build as is or re-design these products using your BoxIt Suite Program!

Laser Jump Start Vol. IV contains projects designed for 12” x 24” or larger laser systems. Based on customer feedback, this package is filled with functional products for your customers’ home and office, including hang-ers, clocks, key ring holders, candy dispensers, and much more.

The new FlexIt CorelDraw macro program was designed for laser engravers to create flexible or cylindrical pieces out of solid materials, such as Baltic Birch, MDF, acrylic and more.

FrameIt was specifically created for the Awards industry to enable laser users to turn any material your laser can cut into decorative wall art, stand-alone products, and embellishments.

LJS-FRM


Laser Software

3

Upload from your cell phone camera

2

how it works

Take high resolution photograph

3Scan a photo1

1-Touch Laser Photo™ is an exclusive Universal Laser Systems software application that allows you to quickly and easily make almost any photograph laser engraveable. 1-Touch Laser Photo™ applies special filters to your image and adjusts the contrast and definition appropriately for the material being processed. Using the software is as simple as selecting your target material from a list and cropping, re-sizing, rotating or mirroring the image as needed.

NEW Features!Print Preview Mode — want to see what your photo looks like on wood? Marble? Glass? Use 1-Touch Laser's Print Preview feature to find out without even turning on your laser. Choose from dozens of included simulation backgrounds or use your own!

STEP 1Open the file you want to

engrave in 1-Touch Laser Photo.

1-Touch Laser Photo™

STEP 2Adjust the height and width

according to your material size.

STEP 3Select your material from the

drop down menu.

STEP 4Print it to your laser!

*Illustration samples only

Part # ULS-1TOUCH-SW

yBestproduct!


4

1-Touch Laser Photo™ Software

DA-101B Bamboo Pen with Chrome Trim

DA-101BG Bamboo Pen with Gold Trim

*Illustration sample only

BambooTravel Mug

LAS-TRVC-BMBBamboo Travel Mug,

12.8 oz.


Bamboo Products

Bamboo Strips

LWD-BMB-025 41/2” x 141/2” x 1/4”

The “Green” Alternative!Bamboo is a certified renewable resource.

LWD-COA-BLKFour (4) Black 4” x 4” Ceramic Coaster Tiles & Bamboo Holder

LWD-BMB-COA4” x 4” Four (4) Bamboo

Coasters & Holder

DA-110B61/2” x 11/2”

Coaster Sets

Single Pen Case

PLQ-068-BMB 6” x 8” PLQ-079-BMB 7” x 9”PLQ-810-BMB 8” x 10”PLQ-912-BMB 9” x 12”PLQ-113-BMB 101/2” x 13”PLQ-125-BMB 12” x 15”

Plaques

Ballpoint Pens*Illustration sample only

*Illustration sample only, wine not included

BBQ Gift Set

LWD-BMB-BBQ 195/8” x 51/2” x 31/8”

Tools are stainless steel, with solid bamboo handles.


LWD-BMB-WINE141/4” x 41/4” x 43/4”

Wine Box with Tools

Ceramic Coaster Set


5

Maple

Pen Boxes

Rosewood

DA-102M Pencil

DA-101M Pen

DA-112M Double Pen Case*

DA-110R Single Pen Case*

DA-112R Double Pen Case*

DA-102R Pencil

DA-101R Pen

*Pens sold separatelyDA-110M Single Pen Case*

WD-180M WD-182M WD-182R WD-180R

Business Card Holders

Business Card Holders

WD-150-3Pen Case

DA-11MR Maple Case*, 67/8” x 13/16” DA-11R Rosewood Case*, 67/8” x 13/16”

LWD-BX38-RWRosewood Gift Box

33/4” x 83/4” x 11/4”Includes removable black foam. Foam can be laser

cut to fit any item.Pens not included.

47/8” x 81/4” x 11/2” Holds 3 Items.

Pens not included.

PEN-ML-BAT Baseball Bat Pen PEN-RW-BAT Baseball Bat Pen

DA-108M Letter Opener, 53/4” DA-108R Letter Opener, 53/4”

*Additional pen cases available, see page 39.


Wood Pen/Pencil Sets

6

Rosewood

Matte Black FinishSingle wine presentation box with tools.

Single wine presentation box with tools.

LWD-WINE-RW Wine Box with Acrylic Lid

141/4” x 43/8” x 37/8”

LWD-BBQ-RW BBQ Gift Set,

20” x 63/4” x 3”Box and tool handlesare Rosewood finish

*Illustration sample, wine not included


LWD-WINE-BKWine Box with Tools141/4” x 41/4” x 43/4”

LWD-WINE-RWDWine Box with Tools141/4” x 41/4” x 45/8”

LWD-BX7-RW 73/4” x 61/4” x 23/8”LWD-BX10-RW 101/4” x 71/4” x 3” LWD-BX12-RW 121/4” x 81/4” x 31/2”

Gift Boxes

• Removable foam insert can be laser cut to fit any item

• Tools are stainless steel

• Laser engravable acrylic lid slides open and closed

eGreat gift idea!

New



Wood Products

7

Rosewood

LWD-WNT-RW3 Piece Wine Gift Set

73/4” x 65/8” x 2”

*Golf balls not included

LWD-GLF-RW Box, 73/4” x 6” x 21/4”

LWD-FLK-RW Flask Set

81/4” x 81/4” x 23/8”

LWD-FLK-SS Stainless Steel

Flask Set63/4” x 81/8” x 15/8”

LWD-CRD-RW2 Card & Dice Set

71/2” x 41/2” x 13/4”(Includes 2 decks of

cards and 5 dice)

LWD-MAR-RW Martini Set

115/8” x 103/8” x 4”

Includes flask, funnel, shot glass, cards and 5 dice

Includes flask, funnel, and 4shot glasses

Includes shaker, jigger, strainer, stirrer & tongs

eGreat gift idea!

New

LWD-FLK-BK Black Coated

Stainless SteelFlask Set

63/4” x 81/8” x 15/8”

Great forLaser Engraving!

Includes flask, funnel, and 4shot glasses


Wood Products

8

LWD-ALD-332LWD-PIN-332LWD-MAP-332LWD-OAK-332LWD-MAH-332LWD-CHR-332LWD-WAL-332

LWD-TEK-332LWD-BMB-025

AlderBlue PineMapleRed OakMahoganyCherryWalnut

TeakBamboo

Laser Wood Strips

LWD-COA-BLK4Black Lacquered Maple Veneer

LWD-COA-ALD4Alder Veneer



• Sheet size: 8” x 11” • .005”• Self-adhesive back• 8 sheets per package, 2 of each: Maple Birds Eye Maple Cherry Walnut

LWD-THN-KIT

LWD-AST-CHP • Wood samples, assorted• 2” x 33/8”

Wood Thins Kit

Wood Strips Jump Chain

Coasters - MDF

· Available by special order in any of the wood selections. · Sold in sets of four.

• 4” x 4” x 1/4” thick • 1/8” bevelled edges

• 4” x 4” x 1/4” thick • 1/8” bevelled edges

kit

LAS-LEA-LUG32” x 31/2” x 1/16”

Leather


LAS-LEA-CIRCircle, 33/8” dia. x 1/8”

• Light tan colour

LAS-LEA-OVLOval, 23/8” x 33/8” x 1/8”

LAS-LEA-HRTHeart, 3” x 27/8” x 1/8”

LAS-LEA-CRSCross, 45/8” x 23/4” x 1/16”

LAS-LEA-LUG423/8” x 43/4” x 1/16”

TagsLAS-LEA-KIT Leather KitIncludes one of each shapekit

Stock size: 41/2” x 141/2” x 3/32”

zCreatecustomshapes!

kitIncludes 1 of each:

• Alder • Blue Pine • Maple • Red Oak • Mahogany • Cherry • Walnut

LWD-AST-KIT (7 pcs.)

kitIncludes 1 of each:

• Alder • Blue Pine • Maple • Red Oak• Mahogany • Cherry • Walnut

• Teak • Bamboo

LAS-WDS-KIT (9 pcs.)

Idealfor inlay

· Sold in sets of four.

• Custom sizes available by special order• Minimum quantities apply


Wood Products/Leather

9

Key Features

Popular Wood Species

Laserable Hardwood Applications

• Unlacquered, 2-sided • 1/8” & 1/4” thicknesses • 12” x 24” sheets • Available in 18” x 24” size (special order)

Rowmark’s® NEW Hardwood Collection, a line of all natural, quality constructed laserable wood substrates, meets a wide variety of application needs, from architectural, craft and artistry projects to awards and recognition pieces, custom gifts and promotional products.

• Free of open knots and natural voids• Requires less laser power for smooth, even cuts• 2-Sided substrate is not sealed or lacquered• Wood is procured from sustainable sources• Stain Rowmark’s® natural hardwoods to your own desired finish• Durable, multiple layer construction for superior strength & stiffness• No loss of materials due to foreign materials or open voids

• Ornaments• Shapes for all occasions• Key fobs• Wedding invitations• Business cards• Coasters• Architectural models

• Boxes• Albums• Picture frames• Plaques• Promotional items• Catalog / book covers• Custom gifts

WalnutCherry Maple Red Oak

These Laserable Hardwoods are constructed of single-ply, high quality hardwood layers (or veneers) that are laminated together with their wood grains stacked at right angles to each other for added strength, stiffness and dimensional stability, forming a cohesive composite material.

12” x 24” SheetsLWD-CHR18-Q1 1/8”LWD-CHR14-Q1 1/4”

Special Order:18” x 24” Sheets

LWD-CHR18-18 1/8”LWD-CHR14-18 1/4”

12” x 24” SheetsLWD-MAP18-Q1 1/8”LWD-MAP14-Q1 1/4”

18” x 24” SheetsLWD-MAP18-18 1/8”LWD-MAP14-18 1/4”

12” x 24” SheetsLWD-OAK18-Q1 1/8”LWD-OAK14-Q1 1/4”

18” x 24” SheetsLWD-OAK18-18 1/8”LWD-OAK14-18 1/4”

12” x 24” SheetsLWD-WAL18-Q1 1/8”LWD-WAL14-Q1 1/4”

18” x 24” SheetsLWD-WAL18-18 1/8”LWD-WAL14-18 1/4”

New


Rowmark® Hardwood Collection

10

Laserable Metal Picture Frames

Anodized Aluminum Picture Frames

Ultra Gloss Picture Frames

LAS-FRMB-46G holds 4” x 6” photoLAS-FRMB-57G holds 5” x 7” photoLAS-FRMB-80G holds 8” x 10” photo

LAS-FRMA-46B holds 4” x 6” photoLAS-FRMA-57B holds 5” x 7” photoLAS-FRMA-85B holds 8.5” x 11” photo

LAS-FRMR-46 holds 4” x 6” photoLAS-FRMR-57 holds 5” x 7” photo

LAS-FRMR-46H holds 4” x 6” photoLAS-FRMR-57H holds 5” x 7” photo

LAS-FRMB-46S holds 4” x 6” photoLAS-FRMB-57S holds 5” x 7” photoLAS-FRMB-80S holds 8” x 10” photo

LAS-FRMA-46G holds 4” x 6” photoLAS-FRMA-57G holds 5” x 7” photoLAS-FRMA-85G holds 8.5” x 11” photo

LAS-FRMS-46S holds 4” x 6” photoLAS-FRMS-57S holds 5” x 7” photoLAS-FRMS-80S holds 8” x 10” photo

LAS-FRMA-46S holds 4” x 6” photoLAS-FRMA-57S holds 5” x 7” photoLAS-FRMA-85S holds 8.5” x 11” photo

]Creativeideas!

• Easel back• Matte finish for easy engraving• Can stand or be hung horizontally or vertically.

• Ultra Gloss surface provides consistent finish and colours.• Can stand or be hung horizontally or vertically.• Can be paint filled or used with a brass plate.

• High quality anodized aluminum• Great for promotions, incentives, and milestones achieved.

Lasers to bright gold

Black AnodizedLasers to White

Gold AnodizedLasers to White

Silver AnodizedLasers to White

Lasers to bright silver Lasers to bright silver

New

AlbertA Office: tel: 403-250-6774 or 877-775-6774 Fax: 403-250-7718email: [email protected] Web sites: www.cesco.ca • www.laserstuff.ca

Picture Frames

11

Self-Adhesive Slide-In Frames

LAS-SIF-46GLAS-SIF-57GLAS-SIF-68GLAS-SIF-80GLAS-SIF-81G

LAS-SIF-46SLAS-SIF-57SLAS-SIF-68SLAS-SIF-80SLAS-SIF-81S

holds 4” x 6” photoholds 5” x 7” photoholds 6” x 8” photoholds 8” x 10” photoholds 8 1/2” x 11” photo

• Durable plastic frames.• Great for displaying photos or certificates.• Photos simply slide-in for easy assembly.• Mount directly on plaque.

Gold Silver

New

• Hang horizontally or vertically • Photos simply slide in, no need for nails or screws• Clear plastic window protects photo

Slide-In Frame Plaques

Walnut Finish

Matte Black Finish

PLQ-PIC2-357WF9” x 13”

Window sizes5” x 7” & 31/2” x 5”

PLQ-PIC2-357BK9” x 13”

Window sizes5” x 7” & 31/2” x 5”

PLQ-PIC-46WF8” x 10”

Window size4” x 6”


Black Marble Finish

PLQ-PICM-57BK9” x 12”


PLQ-PIC-57BK9” x 12”


PLQ-PIC-46BK8” x 10”


OntAriO Office: tel: 905-795-1262 or 877-795-1262 Fax: 905-795-0219 or 800-632-3726email: [email protected] Web sites: www.cesco.ca • www.laserstuff.ca

Slide-In Frame Plaques

12

*Illustration samples only *Illustration samples only*Illustration samples only

Rosewood Mahogany

PLQH-057-MAHPLQH-068-MAHPLQH-079-MAHPLQH-810-MAHPLQH-912-MAHPLQH-113-MAHPLQH-125-MAH

5” x 7” 6” x 8” 7” x 9” 8” x 10” 9” x 12” 10 ½” x 13” 12” x 15”

PLQH-068-RWRPLQH-079-RWR PLQH-810-RWRPLQH-912-RWRPLQH-113-RWRPLQH-125-RWR

6” x 8” 7” x 9” 8” x 10” 9” x 12”10 ½” x 13” 12” x 15”

ProfileProfileBlack

PLQH-068-BKRPLQH-079-BKRPLQH-810-BKRPLQH-912-BKRPLQH-113-BKRPLQH-125-BKR

6” x 8” 7” x 9” 8” x 10” 9” x 12”10 ½” x 13” 12” x 15”

Profile

ProfileBlack

PLQH-068-BLKPLQH-079-BLKPLQH-810-BLKPLQH-912-BLKPLQH-113-BLKPLQH-125-BLK

6” x 8” 7” x 9” 8” x 10” 9” x 12”10 ½” x 13” 12” x 15”

Rosewood Profile

PLQH-068-RWPLQH-079-RWPLQH-810-RWPLQH-912-RWPLQH-113-RWPLQH-125-RW

6” x 8” 7” x 9” 8” x 10” 9” x 12” 10 ½” x 13” 12” x 15”

Ultra Gloss Profile

5” x 7”7” x 9”8” x 10”9” x 12”

SPLH-057-400 SPLH-079-400SPLH-810-400SPLH-912-400


High Gloss Piano Finish Plaques

13


(not laserable)


PLQH-78-SLD 71/4” x 83/4”PLQH-89-SLD 81/8” x 93/4”PLQH-122-MLT 12” x 12”

PLQH-DK29-BK Black, 2” x 91/2”

PLQH-DK29-RW Rosewood, 2” x 91/2”

*See Name Plates, pages 15 and 56

Gavel & Block

Gavel Plate

GVL-010R 10” long - Rosewood

GBK-040R 4” DiameterRosewood GVL-714

7/8” x 61/8”, Bright Gold Brass

• Plate area is recessed for dramatic effect

Eclipse Piano Finish Plaques

Rosewood

71/2” x 9”, holds 5” x 7” plate81/2” x 10”, holds 6” x 8” plate91/2” x 12”, holds 7” x 10” plate 11” x 13”, holds 81/2” x 11” plate

71/2” x 9”, holds 5” x 7” plate81/2” x 10”, holds 6” x 8” plate91/2” x 12”, holds 7” x 10” plate 11” x 13”, holds 81/2” x 11” plate

PLQH-057-BLEPLQH-068-BLEPLQH-710-BLEPLQH-811-BLE

PLQH-057-RWEPLQH-068-RWEPLQH-710-RWEPLQH-811-RWE

Black

Rosewood Shield Rosewood Maltese Cross

Desk Bars

New New

LAS-PLQ-KITPlaque Kit

kit

Consists of assorted plaques (7 pcs)


High Gloss Piano Finish Plaques

14

Scroll

SRL-057-SWSRL-079-SWSRL-912-SWSRL-113-SW

5” x 7” 7” x 9”9” x 12”11” x 13”

3-Point Shield

SLD-455-SW 41/2” x 5”

992-808992-810

Walnut 2” x 8” Walnut 2” x 10”

• Bevelled edges• Base is oversized for 2” x 8” or 2” x 10” name plates

Walnut Desk Bar

Florentine Edge Name Plate

PPB601-BK2811/2” x 75/8”

PPB601-BK2011/2” x 91/8”

SWG-079-SWSWG-810-SW SWG-912-SWSWG-115-SW

7” x 9” 8” x 10” 9” x 12”11” x 15”

Grooved Walnut

Black Brass

Square Corners

Solid Walnut

PLQ-079-SWSPLQ-810-SWS PLQ-912-SWSPLQ-113-SWS

7” x 9” 8” x 10” 9” x 12” 101/2” x 13”

PLQ-057-SWPLQ-068-SWPLQ-079-SWPLQ-810-SW PLQ-912-SWPLQ-113-SWPLQ-115-SWPLQ-125-SW

5” x 7” 6” x 8” 7” x 9” 8” x 10” 9” x 12” 101/2” x 13” 11” x 15” 12” x 15”

Square Corners

PLQ-068-SWR PLQ-079-SWRPLQ-810-SWR PLQ-912-SWRPLQ-113-SWR PLQ-115-SWR

6” x 8” 7” x 9” 8” x 10” 9” x 12” 101/2” x 13” 11” x 15”

Round Corners

Gavel & Block

Gavel Plate

GVL-010 10” long - Solid Walnut

GBK-040 4” DiameterSolid Walnut GVL-714

7/8” x 61/8”, Bright Gold Brass(not laserable)

Easel Back Picture Frames LWD-FRMW-046 Holds 4” x 6”LWD-FRMW-057 Holds 5” x 7”LWD-FRMW-810 Holds 8” x 10”LWD-FRMW-811 Holds 81/2” x 11”

Genuine Walnut Frame


Solid Brass School Bells

BEL-552 51/2” Bell

21/2” Bell Diameter

BEL-653 61/2” Bell

31/8” Bell Diameter

New

*See additional Name Plate, page 56


Solid Wood Plaques

15

Easel Back Picture FramesLWD-FRMA-046 Holds 4” x 6”LWD-FRMA-057 Holds 5” x 7”LWD-FRMA-810 Holds 8” x 10”LWD-FRMA-811 Holds 81/2” x 11”

Red Alder Frame


Alderwood Fridge Magnet

LWD-FRDA-D2 2” dia., 1/4” thick

BackFront

Genuine Bamboo

Alder Plus

LazerDark™ Laser Colour Spray

Genuine Red Alder

PLQ-079-SAP 7” x 9” PLQ-810-SAP 8” x 10” PLQ-912-SAP 9” x 12” PLQ-113-SAP 101/2” x 13”

PLQ-046-ALDPLQ-057-ALDPLQ-068-ALDPLQ-079-ALDPLQ-810-ALDPLQ-912-ALDPLQ-113-ALDPLQ-125-ALD

4” x 6” 5” x 7” 6” x 8” 7” x 9” 8” x 10” 9” x 12”101/2” x 13” 12” x 15”

• Genuine Red Alder and Genuine Walnut.

• Red Alder has quickly become the wood of choice for laser engraving.• Smooth surface allows for quality finished product.

• For colour filling plaques.• Permanent & high contrast marking• Virtually no wicking for clean fill• Comes in easy to use aerosol can




*For more Bamboo products see page 5

PLQ-068-BMBPLQ-079-BMBPLQ-810-BMBPLQ-912-BMBPLQ-113-BMBPLQ-125-BMB

6” x 8” 7” x 9” 8” x 10” 9” x 12”101/2” x 13” 12” x 15”

Double Roll Bevel Profile



Staffpick!

New

LAS-DARK-CLRLAS-DARK-BRNLAS-DARK-BLK

Clear Finish Coat, 9 ozDark Brown, 11 ozBlack, 11 oz

992-708 Alderwood 2” x 8” 992-710 Alderwood 2” x 10”

• Bevelled edges• Base holds 2” x 8” or 2” x 10” name plates

Alder Desk Bar

DSK-BLK-208 Black Acrylic 2” x 8”DSK-BLK-210 Black Acrylic 2” x 10”

Acrylic Desk Wedge• 1” thick• Designed to stand at a

slight angleNew

*See Name Plates, pages 15 & 56



Bamboo & Alder

16

Oak Finish (MDF) Walnut Finish (MDF)

PLQ-057-OFPLQ-068-OFPLQ-079-OFPLQ-810-OFPLQ-912-OFPLQ-113-OFPLQ-125-OF

5” x 7” 6” x 8” 7” x 9” 8” x 10” 9” x 12” 101/2” x 13” 12” x 15”

Profile

• Can be engraved and paint-filled after laser engraving

Profile


*Illustration samples onlyMarble Finish (Foil MDF)

PLQ-057-BKPLQ-068-BKPLQ-079-BKPLQ-810-BKPLQ-912-BKPLQ-125-BK

5” x 7” 6” x 8” 7” x 9” 8” x 10” 9” x 12” 12” x 15”

PLQ-057-GNPLQ-079-GNPLQ-810-GNPLQ-912-GN PLQ-125-GN

5” x 7” 7” x 9” 8” x 10” 9” x 12” 12” x 15”

Profile

PLQ-057-WFPLQ-068-WFPLQ-079-WFPLQ-810-WFPLQ-912-WFPLQ-113-WFPLQ-125-WF

5” x 7” 6” x 8” 7” x 9” 8” x 10” 9” x 12” 101/2” x 13” 12” x 15”

Matte Black Finish (MDF)

Profile

PLQ-057-MT4PLQ-068-MT4PLQ-079-MT4PLQ-810-MT4PLQ-912-MT4PLQ-113-MT4PLQ-125-MT4

5” x 7” 6” x 8” 7” x 9” 8” x 10” 9” x 12” 101/2” x 13” 12” x 15”

Apply pre-mask Squeeze air bubbles out Ready to engrave

Pre-mask Tape

9PR-MASK-4 41/4” x 100 yds9PR-MASK-6 6” x 100 yds9PR-MASK-12 12” x 100 yds

• Ultra high grade paper with high tack adhesive• Includes superior release liner adhesion to prevent wrinkling, curling and edge lifting• Protects engraving when cutting out shapes• Assists with decreasing the effects of the laser burn *See page 19 for list of all sizes available.


Plaques

17

Plaque Presentation Boxes• Boxes hold plaques up to 7/8” thick • Clear poly window provides maximum protection and visibility

Part No. Plaque sizeBOX-PLQ-046 41/4” x 6”BOX-PLQ-057 5” x 7”BOX-PLQ-068 6” x 8”BOX-PLQ-079 7” x 9” BOX-PLQ-810 8” x 10” BOX-PLQ-912 9” x 12” BOX-PLQ-113 101/2” x 13”BOX-PLQ-125 12” x 15”

Plaque Pouches (Foam)

Part No. Plaque size Pouch size

POU-057 4” x 6”, 5” x 7” 6” x 8”POU-068 6” x 8” 7” x 9”POU-079 7” x 9” 8” x 10”POU-810 8” x 10” 9” x 11” POU-912 9” x 12” 10” x 13” POU-113 101/2” x 13” 111/2” x 14” POU-125 12” x 15” 13” x 17”

• 1/8” thick • Premium quality• Protects plaques

Poly Bags

Part No. Size

BGS-608 6” x 8”BGS-710 7” x 10”BGS-912 9” x 12”BGS-113 10” x 13”BGS-1318 13” x 18”BGS-1520 15” x 20”

• Made from durable 2 mil plastic• Sold 100 per package

Black Plastic Easels

Part No. Height Plaque sizeEAS-004 4” 4” x 6” or 5” x 7”EAS-006 6” 5” x 7” or 6” x 8” or 7” x 9”EAS-007 7” 7” x 9” or 8” x 10”EAS-008 8” 8” x 10” or 9” x 12”

Felt Pads Bumps• Prevents scratching on desks & walls.• For use on trophy plaques & wooden bases.

• Adhesive backed.• Clear bumps. Great for acrylic, glass or crystal awards.

• 8” x 101/2” metal frame• Holds 41/2” x 57/8” plate

Walnut Finish Shield (MDF)

• 5/8” thick• Black edge

SLD-675-WF 61/8” x 73/4”

Metal Scroll Frame for Plaques

PLQ-MTL-SRLGCast Metal

Use this metal scroll frame, along with a metal plate and

mounted on a wooden plaque, for an enhanced look

AL20-400-SH23 Lasers to gold

• Black aluminum• 5” x 51/2”

Laser Aluminum Plate

AL20-400S-SH23Lasers to silver


Nails (100/pack)NLS-738 Gold 3/8” NLS-750 Gold 1/2” NLS-338 Silver 3/8” NLS-350 Silver 1/2”

Screws - Phillips (100/pack)SCP-025 Gold 1/4” x 1/16”SCP-038 Gold 3/8” x 3/32”SCP-325 Silver 1/4” x 3/32”

Domed Nail (100/pack)NLS-DOM Gold 1/2”NLS-DOM-3 Silver 1/2”

FLT-038 - 3/8” dia. (100 / sheet) FLT-CLR - 3/8” dia. (225 / sheet)


Plaque Accessories

18

LiquaMASK™LiquaMask™ works with: glass, acrylic, leather, coated metal, marble & granite, engraving plastic, clear coated wood & other materials.

LiquaMASK™ applies as a liquid and quickly dries to create a durable mask. LiquaMASK™ is laser-safe, non-hazardous and non-toxic.

The mask will protect the topsurface of the substrate to prevent smoke damage or scorching from the engraving or cutting process.

Ideal for a variety of laser processes including colour filling, light sand-blasting and deep engraving.

LaserTape™ Sandblastable Laser Mask

Laser TapeLAS-TAP-400 4” x 100’LAS-TAP-625 6” x 25’LAS-TAP-600 6” x 100’StripsLAS-TAP-406 4” x 6’’

Brasive®PhotoS Y S T E M S

Apply

Blast

Laser

PhotoBrasive® LaserTape™ is a sandblastable laser mask, designed to create stencils for the high end corporate, promotional products and giftware industries. Simply Apply-Laser-Blast!

LaserTape™ allows you to use a laser engraver machine in correlation with a sandblast machine to create low-cost stencils.LaserTape™ conforms beautifully to surfaces without wrinkling, burns clean and peels easily making for an effortless removal.

• No PVC!• Fast & simple clean up - peels off easily• Quick burn

• Easy to colourfill after sandblasting• Conforms smoothly to surfaces without wrinkling

Pre-mask Tape

Size Part No.11/4” x 100 yds 9PR-MASK-1

21/4” x 100 yds 9PR-MASK-2

31/4” x 100 yds 9PR-MASK-3

41/4” x 100 yds 9PR-MASK-4

6” x 100 yds 9PR-MASK-612” x 100 yds 9PR-MASK-12

• Ultra high grade paper with high tack adhesive• Includes superior release liner adhesion to prevent wrinkling, curling and edge lifting• Protects engraving when cutting out shapes• Assists with decreasing the effects of the laser burn

• Economical paper lined, suitable for general applications. • Rubber based adhesive.

Double-sided Supertuff Tape

Double-Sided Tape• High performance tape. • Our #1 seller. • Long lasting, all-weather acrylic adhesive holds up in extreme cold, heat and humidity.

Size Length Part No. 1/4”

x 55 meters

99T-025 3/8” 99T-038 1/2” 99T-050 3/4” 99T-075 1” 99T-010 11/2” 99T-150 2” 99T-200 1/2”

x 33 meters 99T-050-36

3/4” 99T-075-36 1” 99T-010-36

Size Length Part No.

1/2”

x 33 meters

99P-050

3/4” 99P-075

1” 99P-010

Don’tforget the tape!

New

Part No. LAS-MSK-PNT LAS-MSK-QRT LAS-MSK-GALSize 1 pint - 16 oz 1 quart - 32 oz 1 gallon - 4 quarts

Coverage approx. 2000 sq. in approx. 4000 sq. in approx. 16000 sq. in


Pre-mask & LaserTape™

19

Size Length Part No.

1/2”x 66 meters

99E-050

3/4” 99E-075

Size Part No.

12” x 24” ADH-010 24” x 24” ADH-020 24” x 48” ADH-030

• Long-lasting adhesive provides a solid, permanent bond.• Adhesive layer is protected by a coated liner to allow easy release.

3M™ Adhesive

Size Type Part No.

12” x 24”Sheets

99A-467-S1224” x 36” 99A-467-S36

12” x 180 yardRolls

99A-46712” x 180 yard 99A-468

Double-SidedEngraving Table Tape

• HIGH-TACK (side is applied on the table).• LOW-TACK (side holds the plate).• Re-usable.• Eliminates the need for clamps or jigs. To order pre-applied onto

plastic or metal sheeting:

Multi-Mat Plus™Plus

Multi-Mat Plus™ is a 2-sided silicone-like product used to hold down thin materials, as well as items with “peel-and-stick” adhesive backing applied. Tape will not normally hold down these items.

Multi-Mat Plus™ will last for many years under normal use. The permanently tack surface renews itself when wiped off with a bit of soap and warm water. If you engrave thin materials or laser foils, Multi-Mat Plus™ will hold the material flat and in focus.

laser table with Multi-Mat™ laser table without Multi-Mat™

Size Part No.

6” x 12” TKM2-612

9” x 12” TKM2-912

12” x 12” TKM2-12212” x 24” TKM2-124

Magic Peel™ Masking Remover

Ô Works on most materials covered with protective plastic masking such as aluminum, brass, engravable plastic and plexiglass. Ô Magic Peel™ won’t scratch or scuff highly polished surfaces.

With one swipe, Magic Peel™ lifts an edge of protective

plastic allowing you toeasily grab the plastic

and pull it off.MSK-PEEL

Adhesive Remover

Size Part No.1 Quart 99A-REM

• Removes most types of glue and adhesive residue left by decals, tapes and graphics.• Simply spray and leave on for 60 seconds (no more than 120) then lightly scrap off glue residue.• Rinse area with water.• Use in well-ventilated area.

*Includes spray nozzle

New


Adhesives & Multi-Mat™

20

This greaseless clear product is recommended for use with products that will require adhesive to be applied after engraving.

SEKLEMA™ is a 2-sided material designed to hold materials on your engraving table without the use of tape or jigs, and is a re-usable,non-stick material that can be easily cleaned with only a soft sponge and water. It works with both metal and plastic, as well as many other materials designed for engraving.

SEKLEMA™ Mat

Size Part No.

12” x 12” TKM2-C122

12” x 24” TKM2-C124

• 2-sided• Clear greaseless surface


21

Colour Name 2 fl oz Jar 8 fl oz Jar

Red PNT-R601-2 PNT-R601-8

Yellow PNT-R701-2 PNT-R701-8

Orange PNT-R651-2 PNT-R651-8

Light Blue PNT-R562-2 PNT-R562-8

Blue PNT-R501-2 PNT-R501-8

Purple PNT-R582-2 PNT-R582-8

Ocean Blue PNT-R592-2 PNT-R592-8

Pine Green PNT-R902-2 PNT-R902-8

Bright White PNT-R204-2 PNT-R204-8

Black PNT-R402-2 PNT-R402-8

Silver PNT-R304-2 PNT-R304-8

Gold PNT-R771-2 PNT-R771-8

PRIMARy PAInTS

PaintPlus™ paints are acrylic non-toxic paints that are ideal for sign-making applications enhanced with custom colour matching, multi-colour and 3D effects. PaintPlus™ paints are specially formulated for colour filling Rowmark's sub-surface (reverse engravable) products. The smooth, rich colours provide excellent coverage and are self-sealing. The Primary line offers a wide range of colours that were selected to match twelve of the most popular colours found

in Rowmark’s ADA Alternative and Ultra-Mattes product lines.

PaintPlus™ Primary 2 fl oz Kit:

PNT-RKIT-2 contains: • Twelve 2 fl oz jars of PaintPlus™ Primary Paint colours• Two 1” foam applicators

SAFETy PAInTS

PaintPlus™ Primary 8 fl oz Kit:

PNT-RKIT-8 contains:• Twelve 8 fl oz jars of PaintPlus™ Primary Paint colours• Two 1” and two 3” foam applicators

PaintPlus™ Safety 2 fl oz Kit:

PNT-RSKIT-2 contains: • Six 2 fl oz jars of PaintPlus™ Safety Paint colours• 1” foam applicator

PaintPlus™ Safety 8 fl oz Kit:

PNT-RSKIT-8 contains: • Six 8 fl oz jars of PaintPlus™ Safety Paint colours• 1” and 3” foam applicators

Colour Name 2 fl oz Jar 8 fl oz Jar

Safety Red PNT-RS601-2 PNT-RS601-8

Safety Yellow PNT-RS701-2 PNT-RS701-8

Safety Orange PNT-RS651-2 PNT-RS651-8

Safety Blue PNT-RS501-2 PNT-RS501-8

Safety Purple PNT-RS582-2 PNT-RS582-8

Safety Green PNT-RS901-2 PNT-RS901-8

The Safety line of paints is specially formulated for applications where recognized safety or OSHA colours in signage are needed.

Acryfil Paint

• Primary kit colours are available individually• Designer colours are available in minimum of 3 per colour

POL-000 Poly Brush

KIT-1Primary Kit

Black A-1White A-2Red A-3Blue A-4Green A-5Yellow A-6Brown A-7Gold A-92Silver A-93

KIT-2Designer Kit

Pumice A-30Pewter A-31Grey A-33Wedgewood A-36Slate A-37Jade A-40Teal A-42Dusty Mauve A-45Plum A-47

KIT-3 - Combo Kit

Combination of Kit-1 and Kit-2• Acryfil is a specialized formula of polymer acrylic developed especially for use with reverse engravable materials

• 2 oz

• Kits include poly brush

Paint


22

Description Part No.Metal Shear with 12” blade SHR-M12-AC

Upper metal replacement blade SHR-M12-UMA

Curved shear blade re-sharpened SHR-MC-999

Straight shear blade re-sharpened SHR-999

• Twin Lexan safety shields• Long handle for maximum shear power• Size: 26”L x 14”W x 11”H• Weight: approx. 35 lbs.

• Capacity: Aluminum .040” (hole punch capacity .025”) Brass .025” (hole punch capacity .020”) Steel .015” Flexible Plastic .063”• Corners without burrs or distortions• Dies sold separately, see chart below• Standard Cornermate® & EZ-Cornermate® share the same die sizes

• Capacity: Aluminum .063” Brass .030” Steel .020” Flexible Plastic .350”• Size: 10”L x 6.5”W x 9”H• Weight: approx. 7.5 lbs. (with cutting unit)• Dies sold separately, see chart

Corner Rounders - Cornermate® Series

EZ-Cornermate® Rounder Base

Standard Cornermate® Base

Heavy Duty Cornermate PLUS® Rounder Base

CRN-M40 Base

CRN-060 Base

Die

Die

Radius die (See chart for part # for dies)

Radius die

Die Radius Notched Scallop Chamfer Hole Slot*

3/32” DIE-032HP1/8” DIE-018R DIE-018N DIE-018HP DIE-SLT3/16” DIE-316R DIE-316N DIE-316HP1/4” DIE-025R DIE-025N DIE-025S DIE-025C5/16” DIE-516R3/8” DIE-038R DIE-038N DIE-038S DIE-038C1/2” DIE-050R DIE-050N DIE-050S3/4” DIE-075R DIE-075N 1” DIE-100R DIE-100N

Die Radius Slot*

1/4” DIE-SLT21/2” DIE-12R3/4” DIE-34R 1” DIE-10R

CRN-000 Base

• Upper curved power blades for metal• Shear capacity: Aluminum .040” Brass .025” Steel .015”

SHR-M12-AC

Auxiliary Equipment

New

New

• Size: 10”L x 6.5”W x 8.5”H • Weight: approx. 6.5 lbs. (with cutting unit)• EZ-Cornermate® is half the effort of the standard table• Heavy duty aluminum work table with tool steel-hardened punch and die shapes

• Cornermate Plus® has a wider opening for flexible plastics up to .350”• Features a controlled action roller that moves up and down like a press• Cornermate Plus® die sizes listed in chart below

• Standard table• Size: 10”L x 6.5”W x 6”H• Weight: approx. 6 lbs. (with cutting unit)

leSS

eFFOrt

HeAVY

DUtY

Metal Shear

*Slot measures: 1/8” x 9/16”

*Slot measures: 1/4” x 1/2”

Auxiliary Equipment

Brass Plated Steel - Simplicity Series

Brass Plated Steel - Rounded Corners

Brass Plated Steel - Florentine Edge

Custom Cut Plates • See page 55 for custom cut shapes available

Size Black Burgundy Blue3” x 5” PPS2001-BK35 PPS2001-BG35 PPS2001-BL354” x 6” PPS2001-BK46 PPS2001-BG46 PPS2001-BL465” x 7” PPS2001-BK57 PPS2001-BG57 PPS2001-BL576” x 8” PPS2001-BK68 PPS2001-BG68 PPS2001-BL687” x 10” PPS2001-BK70 PPS2001-BG70 PPS2001-BL70

Size Black Burgundy Blue3” x 5” PPS170-BK35 PPS170-BG35 PPS170-BL354” x 6” PPS170-BK46 PPS170-BG46 PPS170-BL465” x 7” PPS170-BK57 PPS170-BG57 PPS170-BL576” x 8” PPS170-BK68 PPS170-BG68 PPS170-BL687” x 10” PPS170-BK70 PPS170-BG70 PPS170-BL70

Size Black Burgundy Blue5” x 7” PPS170-BK57R PPS170-BG57R PPS170-BL57R6” x 8” PPS170-BK68R PPS170-BG68R PPS170-BL68R7” x 10” PPS170-BK70R PPS170-BG70R PPS170-BL70R

• Custom cut plates available in any metal from this catalogue

New

• Engraves gold

• Engraves gold

• Engraves gold


23

Metal Plaque Plates


24

Brass Plated Steel, Patina Marble - Wave

Solid Brass Marble Mist Plates - Florentine EdgeAvailable sizes (Marble Mist & Black Plates):

2” x 31/2”21/2” x 41/4”

3” x 5”

PPB620-BL23PPB620-BL24PPB620-BL35

PPB620-GN23PPB620-GN24PPB620-GN35

PPB620-GY23 PPB620-GY24PPB620-GY35

PPB620-SN23PPB620-SN24PPB620-SN35

Blue Green Grey Sienna

PPB600-BK23 PPB600-BK24PPB600-BK35

Black Brass Plate - Florentine Edge

Size Black Blue Green Red5” x 7” JBPS-WV-BK57 JBPS-WV-BL57 JBPS-WV-GN57 JBPS-WV-RD576” x 8” JBPS-WV-BK68 JBPS-WV-BL68 JBPS-WV-GN68 JBPS-WV-RD687” x 10” JBPS-WV-BK70 JBPS-WV-BL70 JBPS-WV-GN70 JBPS-WV-RD70

Brass Plated Steel, Marble Mist - Florentine Edge

Size Blue Green Sienna5” x 7” PPS1725-BL57 PPS1725-GN57 PPS1725-SN576” x 8” PPS1725-BL68 PPS1725-GN68 PPS1725-SN687” x 10” PPS1725-BL70 PPS1725-GN70 PPS1725-SN70

LAS-PLT-KITkit

Metal Plaque Plates Kit, consists of assorted

plates (17 pcs)

• Engraves gold

• Engraves gold (Black available in 4” x 6”)

Solid Brass, Marble - Shooting Star *illustration sample only

Size Black Blue Green Red5” x 7” PPB47-BK57 PPB47-BL57 PPB47-GN57 PPB47-RD576” x 8” PPB47-BK68 PPB47-BL68 PPB47-GN68 PPB47-RD687” x 10” PPB47-BK70 PPB47-BL70 PPB47-GN70 PPB47-RD70

• Engraves gold

*For more plates, see p.55

Metal Plaque Plates

• Engraves gold

• Engraves gold

• Engraves gold

Brass Plated Steel - Showtime Series


Brass Plated Steel - Headline Series

Brass Plated Steel - Starburst Series



Size Black Blue Green Red5” x 7” JBPS-STR-BK57 JBPS-STR-BL57 JBPS-STR-GN57 JBPS-STR-RD576” x 8” JBPS-STR-BK68 JBPS-STR-BL68 JBPS-STR-GN68 JBPS-STR-RD687” x 10” JBPS-STR-BK70 JBPS-STR-BL70 JBPS-STR-GN70 JBPS-STR-RD70

Size Black Blue Green Red5” x 7” JBPS-SW-BK57 JBPS-SW-BL57 JBPS-SW-GN57 JBPS-SW-RD576” x 8” JBPS-SW-BK68 JBPS-SW-BL68 JBPS-SW-GN68 JBPS-SW-RD687” x 10” JBPS-SW-BK70 JBPS-SW-BL70 JBPS-SW-GN70 JBPS-SW-RD70

Size Black Blue Green Red5” x 7” JBPS-HL-BK57 JBPS-HL-BL57 JBPS-HL-GN57 JBPS-HL-RD576” x 8” JBPS-HL-BK68 JBPS-HL-BL68 JBPS-HL-GN68 JBPS-HL-RD687” x 10” JBPS-HL-BK70 JBPS-HL-BL70 JBPS-HL-GN70 JBPS-HL-RD70

New

New


Metal Plaque Plates

25

Brass Plated Steel - Sport Activity Plates, 4” x 6”

Brass Plated Steel - Decorative Plaque Plates

• Engraves gold

• Engraves gold

PPS190-BK46 4” x 6”PPS190-BK68 6” x 8”PPS190-BK70 7” x 10”

PPS110-BK68 6” x 8”PPS110-BK70 7” x 10”

PPS160-BK68 6” x 8”PPS160-BK70 7” x 10”

PPS210-BK68 6” x 8”PPS210-BK70 7” x 10”

PPS200-BK68 6” x 8”PPS200-BK70 7” x 10”

JBPS-BBL-46Baseball

JBPS-VIC-46Victory

JBPS-BSK-46Basketball

JBPS-GRD-46Graduation

JBPS-SOC-46Soccer

JBPS-BWL-46Bowling

JBPS-FTB-46Football

JBPS-HCK-46Hockey

The lookof brass!

JBPS-TRK-46Track

JBPS-GLF-46Golf

New


Metal Plaque Plates

26

Tear Drop Series -Desert Sand

TD-F05-DS585” x 81/2” x 1/2”

(Insert 41/4” x 71/2” x 1/8”)

TD-F05-DS6061/2” x 10” x 1/2”

(Insert 51/4” x 81/2” x 1/4”)

TD-F05B-DS292½” x 9½” x 1½”

(Insert 21/4” x 9” x 1/8”)

Desk Bar

• Removable insert included

PlaqueVA-P22-BK79 7” x 9” x 1/2”VA-P22-BK80 8” x 10” x 1/2”

Midnight Brass - Acrylic

RectangleVA-D22-BK46 4” x 6” x 1”VA-D22-BK57 5” x 7” x 1”VA-D22-BK68 6” x 8” x 11/4”

Frosted Wave - Acrylic

VA-D18-CL29 23/8” x 91/2” x 3/4” Clear

VA-D18-CL46 41/2” x 61/2” x 7/8” Clear

Stone Edge - Acrylic

VA-D12-BK2823/8” x 81/2” x 1” Desk Bar

Shadow - AcrylicVA-D10-BK33

33/4” x 33/4”Paper weight with

four protective bumpers

VA-D22-BK29 23/8” x 9” x 1” Desk Bar

Rectangle

Desk Bar

3” x 5” x 3/4”VA-GL102-BK35VA-GL102-BE354” x 6” x 11/8”VA-GL102-BK46VA-GL102-BE465” x 7” x 11/8”VA-GL102-BK57VA-GL102-BE57

BlackBeige

BlackBeige

BlackBeige

Black Granite/Glass

Peak Series - Black Glass

VA-GL100-BK89 8” x 9”(walnut and metal base)

VA-GL101-BK89 8” x 9”(walnut and metal base)

Fountain Series - Black Glass

VA-GL100-BK47 4.5” x 7”(incl. brass support posts)

VA-GL101-BK57 5” x 7”(incl. brass support posts)


Awards - Glass/Acrylic

27


PLQ-BDA-079 7” x 9” PLQ-BDA-810 8” x 10” PLQ-BDA-911 9” x 11”

• 3/8” thick• Includes easel

Black Diamond Acrylic Plaque

Stand Up Black Diamond Acrylic Awards, 1” thick

PLQ-BDA-RT46 4” x 6” PLQ-BDA-RT57 5” x 7”

PLQ-BDA-AR46 41/2” x 6”PLQ-BDA-AR47 41/2” x 7”

PLQ-BDA-PK46 4” x 6” PLQ-BDA-PK57 5” x 7”

PLQ-BDA-SETkit

PLQ-BDA-SET1kit

Stand Up Award SetIncludes 1 of each 6”

Stand Up acrylic awards

Black Diamond Plaque SetIncludes 1 of each size

Black Diamond acrylic plaques

PLX24-BKS-810 8” x 10” PLX24-BKS-912 9” x 12”

PLX24-BKG-810 8” x 10” PLX24-BKG-912 9” x 12”

VPX24-BKG-47 4” x 7” VPX24-BKG-58 5” x 8”VPX24-BKG-69 6” x 9”

VPX24-BKS-47 4” x 71/2”VPX24-BKS-58 5” x 8”VPX24-BKS-69 6” x 9”

Reflection Acrylic


Acrylic Awards

28


• Clear acrylic• .25” thick• Includes brass posts

Stand Alone Awards


Part No. LAS-ACR-CLN LAS-ACR-POL LAS-ACR-SCR

Size 8 oz. 8 oz. 8 oz.

Description

Gently cleans all plastics without scratching. Leaves a lustrous shine that resists fogging, repels dust, and eliminates static.

Removes fine scratches, haziness and abrasions from most plastics. With repeated use, NOVUS No. 2 restores faded and discoloured plastics.

Removes heavy scratches and abrasions from most acrylic surfaces. Use when damage is too severe to be restored with NOVUS No. 2 polish.

NOVUS™ Acrylic Polisher

Premium Clear Acrylic Award

AWD-ACR-C43 4” x 31/2” AWD-ACR-C54 5” x 41/2” AWD-ACR-C65 6” x 51/2”

• 1” thick • Self standing• Bevelled on front and back

kitAWD-AM5-SET SetIncludes 1 of each size

Frost Triple Edge Acrylic

VA-D14-CL46 4½” x 6”

VA-D14-CL34 3½” x 4½” VA-D14-CL57 5” x 7”

VA-D14-BK57 5” x 7”

• 1” thick• Clear acrylic

• 1” thick• Black

Jewel Glass with Gold Metal Base

AWD-JWG-G8 8” highAWD-JWG-G9 9” high

• 1/2” thick• Individually boxed• Can be lasered or sandblasted

Mirage Self-Standing Acrylic Award

• 1” thick• Blue base

AWD-AM5-35 3½” x 5”AWD-AM5-46 41/4” x 6”AWD-AM5-57 5” x 7”

Oval Acrylic Award

AWD-AC5-OV7 7” highAWD-AC5-OV8 8” high

• 1” thick• Blue mirrored base• Includes adhesive strip on acrylic

bottom for permanent attachment (shipped unattached)• Size includes base

New


Acrylic Awards

29


LAS-ACR-GLO LAS-ACR-CLOTH

• Includes adhesive strip for permanent attachment to jade glass blank• 1/2” thick bevelled jade glass• Rosewood piano finish base• Can be lasered or sandblasted

Award Glo Award Glo cleaning cloth

• 15” x 15”• Highly absorbent, non-abrasive, reusable, machine wash/dry.• Cleans acrylic, glass, or metal.

• Puts a high gloss shine on aluminum, brass, acrylic, glass, and more.• Citrus-based, 8oz. bottle.

Jade Glass with Rosewood Base

Diamond

Triangle

Rectangle

AWD-JDD-6 6” AWD-JDD-7 7”AWD-JDD-8 8”

AWD-JDT-5 5” AWD-JDT-6 6” AWD-JDT-7 7”

AWD-JDR-46 4” x 6”, 41/2” base AWD-JDR-57 5” x 7”, 51/2” base AWD-JDR-68 6” x 8”, 61/2” base

New


Glass Awards

30

Black Pedestal Crystal Award

AWD-CRY-BK55”

• Premium crystal • Mounted on black crystal pedestal• Blue velvet-lined box• Facet edge

• Mounted on black crystal pedestal• Blue velvet-lined box• Facet edge

AWD-CRY-BK66”

AWD-CRY-BK77”

AWD-CRY-OV771/2”

AWD-CRY-CRS99”

AWD-CRY-OV99”

AWD-CRY-OB88”

AWD-CRY-OB1010”

AWD-CRY-OB1212”

ObeliskOval Facet

Cross

New

New

• All Premier Crystal comes individually packaged in a lined gift box and mounted on a base.


Crystal Awards

31

Crystal Cube

AWD-CRY-CB20 2” cubeAWD-CRY-CB25 21/2” cube

• Blue velvet-lined box• Can be lasered or sandblasted

AWD-CRY-ST88”

AWD-CRY-PW4 4”

AWD-CRY-PW2 13/4” x 21/2”AWD-CRY-PW3 2” x 31/2”

AWD-CRY-TW55”

AWD-CRY-ST99”

AWD-CRY-ST1010”

Rising Star

Paperweights

Diamond

Circle

Achievement• Octagon crystal tower

AWD-CRY-TW661/2”

• Crystal facet

New

New

New

• All Premier Crystal comes individually packaged in a lined gift box


Crystal Awards

32

LAS-ORNG-TDRTear Drop, 25/8” x 33/4”

Bevelled Jade Glass Ornaments

LAS-ORNG-STK Stocking, 27/8” x 4”

LAS-ORNG-CRS Cross, 31/2” x 41/2”

LAS-ORNG-BEL Bell, 31/4” x 35/8”

LAS-ORNG-MN Moon, 2” x 4”

LAS-ORNG-HRT Heart, 3” x 31/2”

LAS-ORNG-HSEHouse, 23/4” x 31/2”

LAS-ORNG-DIA Rectangular Diamond, 3” x 4”

LAS-ORNG-OVL Oval, 23/4” x 33/4”

LAS-ORNG-SQ Square, 31/2” x 31/2”

LAS-ORNG-OCTOctagon, 3” x 3”

• Individually boxed • Ribbons included • 1/8” thick

eGreat gift idea!

Mirrored Glass Ornaments

LAS-ORNM-ARRArrowhead 3” x 31/2”

LAS-ORNM-DIADiamond

45/16” x 23/4”

LAS-ORNM-SQSquare

23/4” x 23/4”

LAS-ORNM-TDPTear Drop31/2” x 31/4”

LAS-ORNM-HSEHouse

31/2” x 23/4”

LAS-ORNM-HEXHexagon

31/6” x 27/8”

LAS-ORNM-OCTOctagon

31/4” x 21/2”

*Illustration samples only• 1/8” thick

LAS-ORNG-TRAD“Traditional” Kit

kit (Arch, Diamond,

House, Star, Tree)

LAS-ORNG-CONT“Contemporary” Kit

kit (Circle,Square,

Oval, Octagon,Tear Drop)

LAS-ORNG-SPEC“Special Occasion” Kit

kit (Moon, Heart,

Cross, Bell, Stocking)

LAS-ORNG-ARCArch, 23/4” x 33/4”

LAS-ORNG-CIRCircle, 3” dia.

LAS-ORNG-STRStar, 33/4” dia.

LAS-ORNG-TRETree, 31/4” x 33/4”

• White ceramic ball ornaments (not directly laserable)

LAS-ORN-OPT Kitkit

(Bell, Oval, Heart & Round shapedEngravable Optical Crystal Ornaments)

Optical Crystal Ornaments Ceramic Ball Ornaments*Illustration samples only

• Satin-lined gift box• Ribbons included• Laser engraving reveals frosty white tone

• 1/4” thick

LAS-ORN-BEL Bevelled Bell Facet

2” x 21/2”

LAS-ORN-HRTPlain Heart13/4” x 13/4”

LAS-ORN-OVLOval Facet13/4” x 21/2”

LAS-ORN-RND Round Facet

21/2” dia. SUB-CER-BAL5 Tree, 1 5/8” dia.(insert included)

SUB-CER-BAL2 Noel, 1 1/2” dia.

(insert not included,see page 56) (front view)


Ornaments

33

LAS-MRB-23Black Marble

2” x 31/2” x 1/4”

LAS-MRB-RBXRound Box with Removable Lid

3” dia. x 2” high

LAS-MRB-COASCoaster Set

Includes 4 coasters and Caddy4” dia. x 3/8” thick


LAS-MRB-PAPPaper Weight

31/2” dia. x 3/4” thick *Illustration sample only

LAS-MRB-DKW8Name Bar

2” x 8” x 2”

Rub ‘n Buff®1/2 oz (15ml) tube:RUB-BLUERUB-BLACKRUB-GOLDRUB-GREENRUB-PURPRUB-REDRUB-RUBYRUB-SILVRUB-WHT

Sapphire BlueBlackGold LeafGreenPurpleRedRubySilver LeafAntique White

Marble Products

Granite TilesWith more consistent laser engraving results than marble, the fine grain, black finish of the Granite Tiles create wonderful remembrances and gifts. Laser engrave with the same settings used for marble. Granite Tile has a smooth polished edge.

LAS-MRB-COASet of 4 Coasters only

4” dia. x 3/8” thick

*Illustration samples onlyLAS-TIL-BKG4 33/4” x 33/4” x 5/16”LAS-TIL-BKG6 6” x 6” x 5/16”

Birch WhiteLAS-TIL-WH4 4” x 4”LAS-TIL-WH6 6” x 6”

Available by special order:LAS-TIL-CR4 Cream, 4” x 4”LAS-TIL-CR6 Cream, 6” x 6”

Ceramic Tiles Remarkably sharp images with no marring or fading. Can be used for wall murals, awards, donor walls, signs, coasters, commemorative,

jewellery boxes and promotional products.

LAS-TIL-KIT Tile & Marble Kitkit

Consists of 6 tile pcs (four 6” ceramic& two 4” granite), and 6 marble pcs, 2”x3”.

OntariO Office: tel: 905-795-1262 or 877-795-1262 Fax: 905-795-0219 or 800-632-3726Email: [email protected] Web sites: www.cesco.ca • www.laserstuff.ca

Ceramic/Marble/Granite

34

• Lasers to bright white• Dishwasher and microwave safe

8 oz. Square LazerMugTM

Mug Boxes4” x 4” Boxes, fit round mugs:BOX-44-200 WhiteBOX-44-300 SilverBOX-44-400 BlackBOX-44-662 PinkBOX-44-854 KraftBOX-44-932 Kiwi Green

5” x 5” Boxes, fit square mugs: BOX-55-200 White

LAS-MUG-900Green

LAS-MUG-500 Blue

LAS-MUG-600 Red

LAS-MUG-612 Orange

LAS-MUG-400 Black

LAS-MUG-662 Pink


LAS-MUG-KIT6 Consists of one of each

colour square mug (6 pcs.)

kit

+ = Great for fundraising or corporate events!

albErta Office: tel: 403-250-6774 or 877-775-6774 Fax: 403-250-7718Email: [email protected] Web sites: www.cesco.ca • www.laserstuff.ca

Ceramic Mugs11 oz. Round LazerMugTM

LAS-MUG-R90Green

LAS-MUG-R40 Black

LAS-MUG-R50 Blue

LAS-MUG-R30Metallic Silver with black interior

LAS-MUG-R24White with black interior

LAS-MUG-R60 Red

LAS-MUG-R61 Orange

LAS-MUG-R66 Pink


kit

LAS-MUG-KITR8 Consists of one of each

colour round mug (8 pcs.)

New

New

35

10 oz. Rounded Corner LazerMugTM

LAS-MUG-RC90Green

LAS-MUG-RC40 Black

LAS-MUG-RC50 Blue

LAS-MUG-RC60 Red

LAS-MUG-RC20 White with

Black Interior

LAS-MUG-RC30 Metallic Silver with

Black Interior

LAS-MUG-RC66 Pink

kit

LAS-MUG-KITRC7 Consists of one of each

colour rounded corner mug (7 pcs.)

Rounded LazerMug™Bottom View

Great forLaser Engraving!

eGreat gift idea!

LAS-FLK-SSStainless Steel (laser with CerMark™)

LAS-FLK-400Matte Black

Flasks 6oz. stainless steel flask

New

New

LAS-FLK-LEALeather

LAS-FLK-600Gloss Red

LAS-FLK-500Gloss Blue

LAS-FLK-662Matte Pink

LAS-FLK-901Matte Green

LAS-FLK-501Matte Blue

LAS-FLK-601Matte Red

kit Consists of one of each flask, including camouflage (10 pcs)

LAS-FLK-KIT2

• See p.8 for Flask Gift Sets.


Ceramic Mugs & Flasks

36

kit kit

kit

LAS-WTR-SET 17 oz. sample set consists of 1 of each colour, including camouflage LAS-WTR-CMF (6 pcs)

LAS-WTR2-SET 25 oz. sample set consists of 1 of each colour, including camouflage LAS-WTR2-CMF (6 pcs)

Sample set consistsof 1 of each colour,

including camouflage LAS-THM-CMF (6 pcs)

LAS-THM-SET

Laserable 25oz. Vacuum Insulated Bottles

LAS-THM-BLKGloss Black

LAS-THM-REDGloss Red

LAS-THM-BLUGloss Blue

LAS-THM-GRNGloss Green

LAS-THM-ORGGloss Orange

• 25oz. stainless steel, vacuum insulated bottle, with gloss finish.

Laserable 17oz. & 25oz. Water Bottles

LAS-WTR-BLKLAS-WTR2-BLK

Gloss Black

LAS-WTR-REDLAS-WTR2-RED

Gloss Red

LAS-WTR-BLULAS-WTR2-BLU

Gloss Blue

LAS-WTR-GRNLAS-WTR2-GRN

Gloss Green

• Stainless steel design, mouth large enough for ice cubes.

BPA FREE

17 oz.25 oz.

New

New

LAS-WTR-ORGLAS-WTR2-ORG

Gloss Orange


Bottles

37

LAS-TRV-SET Sample set includes 1 of each colour: Black,

Red, Blue, Orange, Green.

kit

Travel Mug with handle16 oz. LAS-TRVC-SET

Sample set includes 1 of each colour: Black,

Red, Blue, Orange, Green.

kit

Travel Mug without handle14 oz.

LAS-TRVC-BLKGloss Black LAS-TRV-BLK

Gloss Black

LAS-TRVC-REDGloss Red LAS-TRV-RED

Gloss Red

LAS-TRVC-BLUGloss Blue

LAS-TRV-BLUGloss Blue

LAS-TRVC-GRNGloss Green

LAS-TRV-GRNGloss Green

LAS-TRVC-ORGGloss Orange

LAS-TRV-ORGGloss Orange

New

New

Bamboo Travel Mug12.8 oz.


LAS-TRVC-BMBBamboo



Travel Mugs

38

DA-102R Pencil

DA-102M Pencil

RosewoodPen & Pencil Twist Series

Maple

Bamboo Pens

DA-101B Bamboo Pen with Chrome clip

DA-101BG Bamboo Pen with Gold clip

PEN-4-BAT Black Anodized Pen

Baseball Bat Pens

PEN-ML-BAT Maple Pen

PEN-RW-BAT Rosewood Pen

PEN-CS2 21/4” x 61/4”, Double Plastic Pen Case

Pen Cases

PEN-VEL4 11/8” x 61/4”, Velvet sleeve

PEN-CS1 11/4” x 61/4”, Single Plastic Pen Case

*Does not include pens

LAS-PEN-KIT2Pen kit (25 pcs)

kit• Assorted pens (bamboo, rosewood, maple, sports, & anodized)

Multi-Line Series Silver Clip Pens

LPEN-ML3 Silver

LPEN-ML4 Black

LPEN-ML6 Red

LPEN-ML8 Gunmetal

LPEN-ML5 Blue

DA-101R Pen

DA-101M Pen Deluxe Sport Pen - Golf

PEN-DLX-GLF Black Brass, with brass clip*additional Deluxe Sport Pens available, call to inquire.

Slim Pen

PEN-SLM-BLKG Black Matte, with gold clip

PEN-GR-BLKG Black Matte, with brass clip

• Single and double pen cases available in Rosewood, Maple & Bamboo, see page 5 and 6.

Gripper Pen


Pens

39

Rubber Grip Silver Clip Pens*

LPEN-RB7 Gold

LPEN-RB4 Black

LPEN-RB5 Blue

LPEN-RB9 Green

LPEN-RB6 Burgundy

LPEN-RB3 Silver

Multi-Ring Gripper Silver Clip Pens*

LPEN-GR7 Gold

LPEN-GR5 Blue

LPEN-GR9 Green

LPEN-GR6 Red

LPEN-GR3 Silver

LPEN-GR4 Black

Swirl Series Silver Clip Pens*

LPEN-SW4 Black

LPEN-SW3 Silver

LPEN-SW5 Blue

LPEN-SW6 Red

LPEN-SW7 Champagne

LPEN-SW8 Gunmetal

LPEN-SW9 Green

*Pencils available by special order. Minimum quantities will apply.

JJ Series Silver Clip Pens*

LPEN-JJ9 Green

LPEN-JJ7 Gold

LPEN-JJ5 Sky Blue

LPEN-JJ6 Burgundy

LPEN-JJ4 Black


Pens

40

Laserable Black Brass Key Tags • Matte Black, Engraves to gold • 1/16” thickness

LKT-OVL11/4” x 21/2”

LKT-CIR11/2” dia.

LKT-TMB11/2” x 21/2”

LKT-OBL3/4” x 23/4”

Wooden Key Chains • 1/4” thickness

LWD-KYM-RECMaple, 11/8” x 21/8”

LWD-KYR-RECRosewood, 11/8” x 21/8”

LWD-KYM-CIRMaple, 11/2” dia.

LWD-KYR-CIRRosewood, 11/2” dia.


LKT-OBL-IN4 BlackLKT-OBL-IN5 BlueLKT-OBL-IN6 Red

LKT-OBL-400 BlackLKT-OBL-500 BlueLKT-OBL-600 RedLKT-OBL-900 GreenLKT-OBL-662 Pink

LKT-CIR-400 BlackLKT-CIR-500 BlueLKT-CIR-600 RedLKT-CIR-900 GreenLKT-CIR-662 Pink

Laserable 2-Tone Key Rings

Metal Key Rings

OvalInsert is 7/8” x 15/16”

CircleInsert is 11/8” dia.

LKT-OVL-IN4 BlackLKT-OVL-IN5 BlueLKT-OVL-IN6 Red

LKT-CIR-IN4 BlackLKT-CIR-IN5 BlueLKT-CIR-IN6 Red

• Individually boxed • Available in 3 colours • Includes anodized aluminum insert

• Individually packaged • Available in 5 colours • Made from Zinc Alloy, lasers to silver

Oblong15/8” long

Circle11/2” dia.

New

OblongInsert is 7/8” x 111/16”


41

Staffpick!

Key Chains

• Includes black tin case • Lighter fluid not includedLaserable Lighters in Laserable Metal Tin

• Lighter is 11/2” x 21/4”• Tin is 21/4” x 31/4”

LAS-LTR-BLK Matte Black LAS-LTR-CHR Chrome(lasers to black with CerMark™)

LAS-LTR-PNK Matte Pink

New

9 LED Flashlights, 3 1/2” long (requires 3 AAA batteries, batteries not included)

3 LED Flashlight Key Chains, 2 1/4” (batteries included)

5 LED Flashlight Keychains, 2 3/4” (batteries included)

LAS-LED9-BK Black

LAS-LED3-BK Black

LAS-LED5-BK Black

LAS-LED9-BL Blue

LAS-LED3-BL Blue

LAS-LED5-BL Blue

LAS-LED9-RD Red

LAS-LED3-RD Red

LAS-LED5-RD Red

LAS-USB4-BK Black LAS-USB4-BL BlueLAS-USB4-RD Red

4GB USB Flash Drive Keychain (3/4” x 11/2”) • Includes anodized aluminum insert • USB drive slides out for easy access

New


42

Gift/Promotional Items

Carabiners• 6 colours • 2 styles • 12 pcs/pkg

(C-clip style available in individual colours: Special order min 100 pcs)

KY-CARB, 2”KY-CARB-L, 3”

LAS-MN3-BK BlackLAS-MN3-BL BlueLAS-MN3-RD Red

LAS-BTLR-BK BlackLAS-BTLR-BL BlueLAS-BTLR-RD Red

LAS-KY6-BK BlackLAS-KY6-BL BlueLAS-KY6-RD Red

LWD-BTL-WD Wood

3-Function Money Clip

Wood Wine/Bottle Opener

4-Function Bottle Opener

6-Function Key Ring

Metal Bottle Opener Keyring

• 21/8” long• 3 function money clip (knife, file, money clip)

• 21/8” long• 6 function key ring (bottle opener, scissors, 11/4” ruler, small screw driver, file, knife)

• 51/4” long• 3 function: corkscrew with assist, bottle opener, knife

• 21/4” long• Laserable area is 3/8” x 15/8”

LAS-BTL-BK BlackLAS-BTL-BL BlueLAS-BTL-RD Red

• 3” long • 4 function bottle opener & key ring, (knife, file, screw driver, bottle opener)


New

Gift/Promotional Items

43

Anodized Aluminum Tags .050”

Circle 11/4”PTA-CIR-XXX

Stop Sign 11/8”PTA-STP-XXX

Decorative 11/4”PTA-DEC-XXX

Bell 11/8”PTA-BEL-XXX

Mouse 11/8”PTA-MSE-734

Satin Gold

GI Tags .050”

Mouse 11/4”PTA-MSE-354

Fire Hydrant 11/4”PTA-HYD-XXX

Cancer Ribbon 11/2”PTA-RIB-662

Light Pink

Shamrock 11/8”PTA-SHM-932

Green

Heart 11/4”PTA-HRT-602

Heart 1”PTA-HRT-600

Red

Guitar Pick 11/16”PTA-PIC-400

Black

Crest 11/4”PTA-CST-600

Shield 11/4”PTA-SHD-XXX

Locker/Shoe Tag 2”IDA-LCK-XXX

Slider Shoe Tag 2”IDA-SH-XXX

• Replace XXX with colour code from the chart (colour shades may vary) • Some tags may require minimum of 50 pcs

Dog Paw 11/4”PTA-PAW-400

Black

Angel 15/8”PTA-ANG-XXX

Dog Face 11/4”PTA-DGF-XXX

GIA-OBM-XXX3/4” x 13/8”

Mini Tag

GIAA-35411/8” x 2”

PTA-PAW-40M Black

Dog Paw 1”

Dog Bone 11/2”PTA-DB-XXX

Star 11/2”PTA-STR-XXX

GIA-OBL-XXX11/8” x 2”

562 Ice Blue

582 Purple

354 Silver

400 Black

500 Blue

502 Dk. Blue

662 Lt. Pink

734 Gold

932 Green600 Red

612 Dk.Orange

• S-hooks sold separately • Chains not includedStock Colours: (available in additional colours)

SHAPE DESCRIPTION SIZE FINISH THICKNESS PART NO.

Jump Ring

1/4”3/8”

NickelNickel

JMP-025JMP-038

1/4” 3/8”

BrassBrass

JMP-725JMP-738

Split Ring

5/8”3/4”1”

1-1/8”1-1/4”

2”

Nickel Nickel Nickel Nickel Nickel Nickel

SPL-058SPL-075SPL-010SPL-118SPL-125SPL-020

1”Brass

SPL-7101-1/4” SPL-725

S-Hook

5/8”3/4”

Nickel Nickel

999-032-058999-032-075

5/8”3/4”

Brass Brass

999-032-758999-032-775

Twisted S-Hook 3/8”

Nickel 999-032-NBrass 999-032-7T

Chainwith

connectors

24”Nickel

3/32” CHA-024-0321/8” CHA-024

30”3/32” CHA-300-0321/8” CHA-030

30” Brass3/32” CHA-B30-0321/8” CHA-B30

Tag Accessories

(100 / pkg.)

(100 / pkg.)

(100 / pkg.)

T-Shirt 11/4”PTA-TSH-XXX

LAS-TGA-KIT2 Anodized Tags KitConsists of assorted anodized tags(50 pcs)

kit

(sold individually)

(100 pkg.)


Anodized Tags

44

Laserable!

Back of medallion, laserable

RIB-034

AcAdemic medAls (Display Board - #MED-FLMA-DIS)

Style Gold Silver Bronze

Art MED-FMG-ART MED-FMS-ART MED-FMB-ART

Band MED-FMG-BND MED-FMS-BND MED-FMB-BND

Chess MED-FMG-CHS MED-FMS-CHS MED-FMB-CHS

Computer MED-FMG-CMP MED-FMS-CMP MED-FMB-CMP

Drama MED-FMG-DRM MED-FMS-DRM MED-FMB-DRM

Graduate MED-FMG-GRD MED-FMS-GRD MED-FMB-GRD

Honour Roll MED-FMG-HNR MED-FMS-HNR MED-FMB-HNR

Math MED-FMG-MTH MED-FMS-MTH MED-FMB-MTH

Music MED-FMG-MUS MED-FMS-MUS MED-FMB-MUS

Lamp of Knowledge MED-FMG-LMP MED-FMS-LMP MED-FMB-LMP

Orchestra MED-FMG-ORC MED-FMS-ORC MED-FMB-ORC

Participant MED-FMG-PAR MED-FMS-PAR MED-FMB-PAR

Science MED-FMG-SCI MED-FMS-SCI MED-FMB-SCI

Perfect Attendance MED-FMG-ATT MED-FMS-ATT MED-FMB-ATT

Reading MED-FMG-REA MED-FMS-REA MED-FMB-REA

Religious MED-FMG-REL MED-FMS-REL MED-FMB-REL

Spelling MED-FMG-SPE MED-FMS-SPE MED-FMB-SPE

Victory Cup MED-FMG-VCC MED-FMS-VCC MED-FMB-VCC

Sportmanship MED-FMG-SPT MED-FMS-SPT MED-FMB-SPT

Star Performer MED-FMG-STR MED-FMS-STR MED-FMB-STR

laserable Flame medals 21/4”

Academic medal display Board

sport medal display Board

sport medAls (Display Board - #MED-FLMS-DIS) Style Gold Silver Bronze

Baseball MED-FMG-BBL MED-FMS-BBL MED-FMB-BBL

Basketball MED-FMG-BSK MED-FMS-BSK MED-FMB-BSK

Bowling MED-FMG-BWL MED-FMS-BWL MED-FMB-BWL

Golf MED-FMG-GLF MED-FMS-GLF MED-FMB-GLF

Cross Country MED-FMG-CRS MED-FMS-CRS MED-FMB-CRS

Football MED-FMG-FTB MED-FMS-FTB MED-FMB-FTB

Karate MED-FMG-KAR MED-FMS-KAR MED-FMB-KAR

Cheerleading MED-FMG-CHR MED-FMS-CHR MED-FMB-CHR

Gymnastics MED-FMG-GYM MED-FMS-GYM MED-FMB-GYM

Hockey MED-FMG-HCK MED-FMS-HCK MED-FMB-HCK

Soccer MED-FMG-SOC MED-FMS-SOC MED-FMB-SOC

Swimming MED-FMG-SWM MED-FMS-SWM MED-FMB-SWM

Tennis MED-FMG-TEN MED-FMS-TEN MED-FMB-TEN

Track MED-FMG-TRK MED-FMS-TRK MED-FMB-TRK

Victory MED-FMG-VIC MED-FMS-VIC MED-FMB-VIC

Volleyball MED-FMG-VOL MED-FMS-VOL MED-FMB-VOL

Wrestling MED-FMG-WRS MED-FMS-WRS MED-FMB-WRS

• Neck ribbons sold separately (see page 46)

MED-FLMA-DIS Display Board (22 pcs)

MED-FLMS-DIS Display Board (19 pcs)

ALBErtA Office: tel: 403-250-6774 or 877-775-6774 Fax: 403-250-7718Email: [email protected] Web sites: www.cesco.ca • www.laserstuff.ca

medals

45

Gi style tags

LAS-TAG-DIS Display Board (13 pieces)

• Can be lasered on front and back• Chains not included (see page 44)• Can be lasered, burnished or scratch engraved

LAS-TAG-BLKBlank

LAS-TAG-STRStar

Tags available:LAS-TAG-BLKLAS-TAG-BBLLAS-TAG-BBSLAS-TAG-BSKLAS-TAG-CHRLAS-TAG-FTBLAS-TAG-GLFLAS-TAG-HCKLAS-TAG-SOCLAS-TAG-STRLAS-TAG-TENLAS-TAG-TRKLAS-TAG-VLB

Blank BaseballSoftballBasketballCheerleadingFootball GolfHockey SoccerStarTennisTrackVolleyball

2”

medallions & Neck ribbons

Wreath, holds 2” insert

MED-01-G Gold MED-01-S SilverMED-01-B Bronze

RIB-034Red/White/Blue

RIB-600Red

RIB-200White

RIB-500Blue

RIB-900Green

RIB-400Black

V-Stitched neck ribbons with ring and clip, 32”

MED-106-GGold

MED-106-S Silver

1”

MED-106-BBronze

MED-VIC-GVictory, Gold

MED-905-G GoldMED-905-S SilverMED-905-B Bronze

MED-906-G Brt. GoldMED-906-S Brt. SilverMED-906-B Brt. Bronze

LaserLIGHTS® in laser bed with Multi-Mat™ (holds material flat - keeps surface at focus height on laser bed).

step 4

• 12” x 24” adhesive backed sheets, colour swatches shown on page 64

®

Create template for disk inserts Laser engraves and cuts material Remove disk insert

Affix adhesive backed material to medallion

step 1 step 2 step 3

step 5

• See page 20 for Multi-Mat™ & SEKLEMA™ Mat

Colour Core Part No.Black White S61-1224Black Silver S75-1224Black Gold S65-1224Yellow Black S68-1224White Black S62-1224White Gold S26-1224

Colour Core Part No. Smooth Gold Black S74-1224 Smooth Silver Black S73-1224 Brushed Silver Black S63-1224 Brushed Bronze Black S69-1224 Brushed Brass Black S64-1224

OntArIO Office: tel: 905-795-1262 or 877-795-1262 Fax: 905-795-0219 or 800-632-3726Email: [email protected] Web sites: www.cesco.ca • www.laserstuff.ca

medallions

46

Odourless Rubber— all the benefits of standard rubber without the odour! A superior product with excellent ink pick-up and transfer.

odourless laser rubber

.110” thick, 81/4” x 113/4” sheet

Standard Laser Rubber engraves easily with the laser— air assist or back-sweep options minimize flaming and keeps rubber sheet cleaner. Laser cut individual stamps.

Cleaning with air hose or LazrCLEAN™ is recommended. The rubber has a durometer (hardness) and resilience that provides great impressions every time.

LR815R RedLR815G Grey

laser rubber .110” thick, 81/4” x 113/4” sheet



LR-811G-NO Grey

LAS-CLN-BTL LAS-CLN-BTL3 LAS-CLN-KIT

PREMIXED with water,16 oz spray bottle

(ready to use)

PREMIXED with water,32 oz spray bottle

(ready to use)

Kit includes concentrate* & empty spray bottle. Concentrate yields eight 16 oz bottles

of LAZRCLEAN™.

*Concentrate sold as part of kit only.

lAZrCLEAN™

LAZRCLEAN™ is 100% natural, biodegradable, all-purpose water-based cleaning solution, madewith soy and corn.

Does not contain any solvents,kerosene, phosphates, or any other harmful toxins.

LAZRCLEAN™ is ideal for cleaning materials after engraving-residue left on wood, rubber, sticky film left on plastic, acrylics and metalproducts.

LAS-RBR-KIT2 Rubber stamp kit (11 pcs) LAS-RBR-KIT3 Rubber stamp kit (20 pcs)kit kit• 6 self-inkers (4 rectangle, 1 circle, 1 Eco) • 2 sheets of Laser rubber • 2 bottles of ink (red & black, 2oz.) • 1 sheet of Polymer

LP-812-CLR Clear

LR-GRN-A4 Green

low odour laser polymer


eco line No odour laser rubber

Low Odour Laser Polymer is a great alternative to standard rubber. Engraves 30 - 40% faster than standard rubber.

.110” thick, 8” x 111/2” sheet

LazrCLEAN™ is required for cleaning polymer to remove residue after engraving.

LAS-CLN-BTL16 oz bottle

(ready to use)

100% environment-friendly product, created entirely from natural ingredients.

New

.090” (2.3 mm) thick,8.27” x 11.4” sheet

recyclable• Free of smell• Eco-friendly, natural laser rubber• Colour is derived exclusively from natural dyes• Outstanding engraving and impression quality


rubber products

47

LRS-S451” x 31/4”

LRS-C50-202”

LRS-C43-1515/8”

LRS-C30-1313/16”

LRS-C24-101”

LRS-C17-75 3/4”

LRS-C12-50 1/2”

Stamp withBlack Ink

Stamp withDry Pad

ImprintArea

LRS-C12-50 LRS-C12-DRY 1/2”LRS-C17-75 LRS-C17-DRY 3/4”

LRS-C24-10 LRS-C24-DRY 1”LRS-C30-13 LRS-C30-DRY 13/16”LRS-C43-15 LRS-C43-DRY 15/8”LRS-C50-20 LRS-C50-DRY 2”

A Variety of Uses:·· Names & Addresses·· Small Business Messages·· One Word Phrases·· Gifts·· Cheque Verification·· Bank Deposits·· Signature Stamps·· Medical Stamps·· Retail Stores·· Promotional

circle stamps

Stamp withBlack Ink

Stamp withDry Pad

ImprintArea

LRS-S10 LRS-S10-DRY 9/16” x 11/2”

LRS-S15 LRS-S15-DRY 1/2” x 1/2”

LRS-S20 LRS-S20-DRY 3/4” x 115/16”LRS-S25 LRS-S25-DRY 5/8” x 3”

LRS-S30 LRS-S30-DRY 7/8” x 23/8”LRS-S35 LRS-S35-DRY 11/8” x 23/4”

LRS-S40 LRS-S40-DRY 11/2” x 3”

LRS-S45 LRS-S45-DRY 1” x 31/4”

LRS-S51 LRS-S51-DRY 3/16” x 5/8”LRS-S52 LRS-S52-DRY 5/16” x 13/16”

self-inking stamps

rubber stamp ink Part No. Colour, 2 oz

LRI-BLK-2 Black

LRI-RED-2 Red

LRI-BLU-2 Blue

LRI-GRN-2 Green

LRI-VIO-2 Violet

• Water based Ink

Replacement Dry Pads Only - for above stamps -

Replace “XX” with size needed(Also available with coloured ink)

LRS-SXX-PAD

*Blue or Red ink stamps by special order

*Blue or Red ink stamps by special order

• We stock black and dry stamps• Blue or Red ink stamps are available by special order• Replacement Pads only are available dry or with coloured inks, by special order.

Replacement Dry Pads Only - for above stampsReplace “XX” with size needed(Also available with coloured ink)

LRS-CXX-PAD

Black Red Blue Green Violet

LRS-S4011/2” x 3”

LRS-S3511/8” x 23/4”

LRS-S307/8” x 23/8”

LRS-S255/8” x 3”

LRS-S203/4” x 115/16”

LRS-S109/16” x 11/2” LRS-S15

1/2” x 1/2”

LRS-S525/16” x 13/16”

LRS-S513/16” x 5/8”

Replacement Dry Pads


self-inking stamps & inksNewlook

Newlook

48

76% of all plastic parts for these new products are made from recycled ABS

LRS-ECO-600D 11/2” x 25/16”

LRS-ECO-732D 13/16” x 13/16”

LRS-ECO-261D15/16” x 13/4”

(PET Mini Dater)

LRS-ECO-MINI1/8” x 3/4”

Heavy metal date stampers Plastic parts of these daters made from recycled water bottles (PET plastic). Tested for over 1,000,000

impressions, your customers will never wear them out.

plastic date stampers

LRS-HM-6103D13/16” x 2”

LRS-HM-6106D15/16” x 23/16”

LRS-HM-6109D13/4” dia.

LRS-HM-6109D

LRS-HM-6104D1” x 23/16”

LRS-HM-6105D13/4” x 13/4”

LRS-ECO-300D13/16” x 113/16”

·· Includes one black ink pad·· Other colours available (contact order desk for details)

·· Includes one black ink pad·· Other colours available (contact order desk for details)

LRS-HM-6103D LRS-HM-6104D

LRS-HM-6105DLRS-HM-6106D

LRS-ECO-600D LRS-ECO-300D

LRS-ECO-732D LRS-ECO-261D


date stampers

49

LRS-PET-846

This revolutionary new product uses recycled water bottles (PET plastic) for the

majority of their plastic parts.

LRS-PET-842

·· Includes one black ink pad·· Also available in dry, blue or red ink pad

LRS-PET-843LRS-PET-844

LRS-PET-84611/16” x 29/16”

self-inking stamps

LRS-PET-8447/8” x 23/8”

LRS-PET-8433/4” x 17/8” LRS-PET-842

9/16” x 11/2”

embossing seals

LRS-EMB-STD 15/8”, White Die

Model ED

LRS-EMB-HND 15/8”, White Die

·· Reinforced high strength steel to insure durability and rigidity.·· Interchangeable die holders.

delrin® - seal die material

LRS-DEL-12212” x 12”, .060” thick*Illustration samples only

·· The soft rubber insert makes it comfortable when holding.·· Softness in leverage makes it easier to have protrudent embossments.

·· Unique and beautiful finish adds bonus to its excellent mechanism.

Delrin® is a very hard plastic resin which can be laser engraved for the purpose of making the male and female dies for corporate seal embossers.

Delrin® replaces the older method of rotary engraving brass dies (female side) and then pouring molten lead in to the brass to create the corresponding male side of the die. With your laser engraver, you can make the dies easily without specialized equipment.

Model EZ-EMHand held model

Foil labelsLRS-FOIL7 GoldLRS-FOIL6 RedLRS-FOIL3 SilverLRS-FOIL9 Green

·· 100 pcs/pkg (25 strips)·· 2” dia.


self-inkers & embossing seals

Newlook

50

premalloy Anodized Aluminum - satin Finish

Satin Blue Matte Black Satin SilverSatin GoldSatin Red

AA20-500 .020” AA20-600 .020” AA25-400 .025”AA40-400 .040”

AA25-734 .025”AA40-734 .040”

AA25-354 .025”AA40-354 .040”AA50-354 .050”AA125-354 .125”

•·Sheet size: 12” x 24” •·Satin Silver can be used outdoors. Other colours can withstand moderate exterior exposure.

AA20-700 .020”

premalloy Anodized Aluminum - Bright Finish

Bright Gold•·Lasers to off-white•·Sheet size: 12” x 24”•·Interior use

•·Suitable for exterior use.

Gloss Black

LB16-400 .016”

• Sheet size: 12” x 24” • Lasers to a bright gold brass finish

laser Brass

laser Aluminum

AL20-900S .020”Lasers to silver

Opaque Green Gloss Black


•·Sheet size: 12” x 24”

Gloss Black

AL20-400 .020”Lasers to bright gold

Gloss Black

AL40-400MS .040" pLasers to matte silver

•·Double sided (p) .040”. Interior use

lasersub™ Aluminum

LSA20-200S .020”

White• Sheet size: 12” x 24”• Lasers to bright silver• LaserSub™ can be sublimated and then lasered

• Can be conventionally rotary engraved (with lubrication), rotary diamond burnished or non-rotating diamond drag (scratch)

• Lasers to off-white

AL20-500S .020” Lasers to silver

Opaque Blue Opaque Red


AL20-443 .020”

metallic Black™ Aluminum• Sheet size: 12” x 24” • Lasers to silver• Has particles of silver creating unique sparkle appearance

•·Suitable for non-rotating diamond drag and rotary engraving

Metallic Black

Premalloy is a premium aluminum, harder and more resistant to abrasion and corrosion. Satin Silver can be used outdoors, other colours can withstand moderate exterior exposure.

laser marble Aluminum

laser marble Brass

Grey Marble Maroon Marble Green MarbleBlue Marble

LMB16-312 .016”

LMA-312 .020”

LMB16-622 .016”

LMA-622 .020”

LMB16-912 .016”

LMA-912 .020”

•·Sheet size: 12” x 24”•·Thickness: .020”•·Aluminum lasers to a bright silver finish

•·Sheet size: 12” x 24”•·Thickness: .016” •·Brass lasers to bright gold brass finish

LMB16-512 .016”

LMA-512 .020”


New

Lasers to silver, and has particles of silver creating unique

sparkle appearance

LAS-MTL-KIT Metal Sheets Kit Consists of assorted metal sheet stock (10 pcs)kit


metal sheets - Aluminum/Brass

51

•·Sheet size: 12” x 24”•·Lasers to bright goldTransparent RedTransparent PurpleTransparent Blue

B15-STL-512 .015” B15-STL-582 .015” B15-STL-602 .015”

Brass plated laser steel

Unlacquered stainless steel

SSU1-334 .018”SSU2-334 .029”SSU5-334 .050”

SSU1-344 .018”SSU5-344 .050”

•·Sheet size: 12” x 24” •·Type 430 is magnetic

SSU22-304 .022”SSU29-304 .029”SSU50-304 .050”SSU62-304 .062”

•·Sheet size: 12” x 24” •·Types 304 and 316 are non-magnetic

SSU22-316 .022” SSU29-316 .029”SSU50-316 .050”

Gloss Blue

Gloss Orange

laser steel

Gloss Red

Gloss Maroon

LS15-912 .015”LS15-602 .015”

LS15-622 .015”

LS15-512 .015”

LS15-612 .015”

LS15-400 .015”

LS15-401 .015”

Gloss Black

Matte Black

Gloss Green•·Sheet size: 12” x 24” •·Lasers to bright gold•·Magnetic

• Sheet size: 12” x 24” • Gold lasers to bright gold• Silver lasers to satin silver• Lasering creates “etched and frosted” lookLFB15-700 .015”

laserFrost™ steel

LFS18-300 .018”

lasersub™ steel

LSS15-200 .015”

White• Sheet size: 12” x 24”• Lasers to bright gold• LaserSub™ can be sublimated and then lasered

Satin SilverType 430

Bright SilverType 430



• Type 316 is more corrosive resistant (generally used in marine applications)• Type 304 is widely used in commercial applications

laser marble steel

LMS15-312 .015” LMS15-622 .015” LMS15-912 .015”

•·Sheet size: 12” x 24”•·Thickness: .015” •·Steel lasers to bright gold finish

LMS15-512 .015”

laser marble mist steel

LMS-SN .025” LMS-GN .025”

•·Sheet size: 12” x 24” •·Thickness: .025”•·Lasers to bright gold finish

LMS-BL .025”

Sienna Marble Blue Marble Green Marble

LAS-LMBK

metals swatch Book

• Laserable Metals Swatch Book


•·Not directly laserable (lasers to black with CerMark™)

magic peel™masking remover

·Ô Works on most materials covered with protective plastic masking such as aluminum, brass, engravable plastic and plexiglass.·Ô Magic Peel™ won’t scratch or scuff highly polished surfaces.

MSK-PEEL

Frosted Gold Frosted Silver

Magnetic Non-Magnetic


metal sheets - steel

52

Alumamark™ colour!

Alumamark™

How to use AlumaMark™·· Works well with most CO2 lasers and some low power YAG lasers.·· AlumaMark™ aluminum sheets are markable on one side only (peel off protective plastic before marking with laser).·· Satin silver uses less power than the other AlumaMark™ finishes.

• ALM2 adhesive is optional: “ALM2A-XXX”, replace X’s with colour code.

• Lasers to black • Resistant to chemicals• Recommended for indoor use

Available in two thicknesses:

ALM5-300 10” x 12”ALM2-300 12” x 20”

ALM5-334-Q1 10” x 12” ALM2-334-Q1 12” x 20”ALM2-334-H1 20” x 24”

ALM2-700 12” x 20”

·· ALM5 - .005”, with adhesive backing·· ALM2 - .020”, without adhesive backing·· ALM2A - .020”, with adhesive backing

Make Your MarkOn the most innovative markable aluminum in the industry, you can achieve rich black positive graphics when marking metal; you get:·· The best resolution capability of any laserable metal·· Excellent durability with resistance to chemicals, heat, abrasion, and sunlight·· Consistent, reliable one-step marking, without chemicals or fill·· The ability to create smooth-surface graphics, integrated into the aluminum, using low power settings

Satin Silver

Matte Putty

ALM2-344 12” x 20”

Mirrored Silver

SatinYellow Brass

ALM2-707 12” x 20”

MirroredGold

ALM5-734-Q1 10” x 12”ALM2-734-Q1 12” x 20”ALM2-734-H1 20” x 24”

Satin Gold

ALM2-872 12” x 20”

Satin Bronze

*Images for illustration purposes only

*Images for illustration purposes only

AlumaMark™ is one of the most innovative markable aluminum in the industry. You can achieve rich black positive graphics when marking metal. Excellent durability with resistance to chemicals, heat, abrasion and sunlight.

• .020” thickness• 12” x 20” sheet size

ALM2-CLR-Q1 AlumaMark™ Colour Setkit

Sample set of five 12”x10” sheets (1 of each colour)

ALM2-704

Satin Yellow

ALM2-602

Satin Red

ALM2-612

Satin Orange

ALM2-932

Satin Green

ALM2-512

Satin Blue

*Available with adhesive backing; add “A”, i.e. ALM2A-XXX, replace X’s with colour code.


metal sheets - Alumamark™

53

laserBlAK™ laserable Aluminum

laserWHite™ laserable Aluminum

Lasers to a “true black”. Intended for indoor use only. Excellent for photo engraving!

Lasers to white. Intended for indoor use only. Excellent for photo engraving!

·· Sheet size: 12” x 24”·· Thickness: .025”

AL25-704

GoldLasers Black

AL25-504

AL25-402

BlackLasers White

AL25-334

SilverLasers Black

AL25-604

AL25-502

Royal BlueLasers White

AL25-894

CopperLasers Black

AL25-914

AL25-602

Forest GreenLasers Black

Cherry RedLasers White

AL25-204

Gloss WhiteLasers Black

AL25-634

AL25-912

MaroonLasers Black

Forest GreenLasers White

AL25-614

AL25-632

OrangeLasers Black

MaroonLasers White

AL25-714

AL25-612

YellowLasers Black

OrangeLasers White



laser-it™ Aluminum

Matte SilverMatte Gold Gloss WhiteGloss Black

Laser to White•·Sheet size: 12” x 24” •·Thickness: .020”•·Lasers to black

AL20-734 .020” AL20-354 .020” AL20-204 .020” AL20-402 .020”

.020” Thick:ALM2-400-Q1 12” x 20”ALM2-400-H1 20” x 24” ALM2A-400-Q1 12” x 20” adhesive backedALM2A-400-H1 20” x 24” adhesive backed

.005” Thick:ALM5-400-Q1 10” x 12” adhesive backed

• Lasers to white lettering

duraBlack™ Aluminum

Resistant to abrasion, heat, UV, salt-corrosion and chemicals, DuraBlack outperforms acrylic and anodized aluminum labels without the added step of a

protective overcoat.

durable Uid andindustrial Asset tracking labels

product Benefits:durable performance

·· Creates precise, durable graphics with any CO2 laser – even for small 10mil 2D codes. Matte finish reduces reflection for combat situations.easy processing

·· Easy to process and produce “A” verification grade labels.Flexible Attachment options

·· Flexible 0.005” thickness adheres to curved surfaces.

Royal BlueLasers Black

Cherry RedLasers Black

AL25-SW-BLK Sample set of 2” x 4” swatches for LaserBLAK™ (10 pcs)

AL25-SW-WHT Sample set of 2” x 4” swatches for LaserWHITE™ (6 pcs)kit

kit

New

New New New New New New

New New New New New

·· Sheet size: 12” x 24”·· Thickness: .025”


metal sheets

54

Size Colour Aluminum Brass(lasers to bright gold)

Steel(lasers to bright gold)

2-sided Aluminum(lasers to matte silver)

Satin Stainless Steel(lasers to black w/ CerMark)

1 1/2” x 3”

Gloss Black

AL20-400S-OVL(lasers to silver)

AL20-400-OVL(lasers to gold)

1” x 2” LB16-400-OV1

1 7/8” x 2 7/8” LB16-400-OV22” x 3” LB16-400-OV23

11/2” x 3” Gloss Black(Bright Gold

border: .015”)

LS15-400-RC15

15/8” x 21/2” LS15-400-OVL

2 x 31/2”Gloss Black

PPB600-BK23

21/2” x 41/4” PPB600-BK24

5 7/8” x 11 7/8””AL40-400MS-LIC

Satin Silver SSU2-334-LIC

lAserABle

Metal Gauge Matte Black Satin Blue Satin Red Satin Green

Satin Anodized Aluminum

(lasers to silver)

.020” AA20-512-CRD2 AA20-612-CRD2 AA20-912-CRD2

.025” AA20-402-CRD2

2” x 3 1/2”

Size Colour Aluminum(lasers to silver)

Brass(lasers to bright gold)

1” x 2 ½”

Gloss Black

AL20-400-NT1 LB16-400-NT1

7/8” x 2 ½” AL20-400-NT2 LB16-400-NT2

1” x 3 ¼” AL20-400-NT3 LB16-400-NT3

1 ¼” x 2 ½” AL20-400-NT4 LB16-400-NT4

Notched & perpetual plates

Business cards

plates License Plate License Plate

.040” .029”

To order custom cut shapes:·· Specify material, plastic or metal, thickness, size and colour·· Choose one of the following corner styles (from 1/8” up to 1/2”)·· If holes are required, specify location and size

custom cut plates

Square Corners radius Corners1/8”, 3/16”, 1/4”, 3/8”, 1/2”

notched Corners1/8”, 3/16”, 1/4”, 3/8”, 1/2”

Scallop Corners1/4”, 3/8”, 1/2”

Slot1/8” x 9/16”

Hole3/32”, 1/8”, 3/16”

Chamfer1/4”, 3/8”

*For Brass Marble Mist plates and Black Brass plates, see p.24


metal disks & plates

55

Description Size Silver - .018” Gold - .015”

Disks

1” dia. LFS18-300-D1 LFB15-700-D1

1 1/4” dia. LFS18-300-D125 LFB15-700-D125

1 1/2” dia. LFS18-300-D150 LFB15-700-D150

2” dia LFS18-300-D2 LFB15-700-D2

Ovals 1 5/8” x 2 1/2” LFS18-300-OVL LFB15-700-OVL

Business Card 2” x 3 1/2” LFS18-300-CRD LFB15-700-CRD

Name Plate 2” x 8” LFS18-300-28 LFB15-700-28

LaserFrost™ allows you to laser through a printed frosted background to bright gold brass or satin silver steel creating the time honoured look of the “etched and frosted” process.

Alumamark™

Aluminum, Brass, steel disks

laserFrost™

AlumaMark™ lets you achieve rich black positive graphics when marking metal.Excellent durability with resistance to chemicals, heat, abrasion and sunlight.

Size Colour Laser Aluminum Laser Brass Laser Steel

1”

Gloss Black

AL20-400-D1 LB16-400-D1 LS15-400-D1

1 ¼” AL20-400-D125 LB16-400-D125 LS15-400-D125

1 ½” AL20-400-D150 LB16-400-D150 LS15-400-D150

2” AL20-400-D2 LB16-400-D2 LS15-400-D2

• 1” - Minimum 100 pcs per size & colour• 11/4” to 2” - Minimum 50 pcs per size & colour

Description Size Satin Silver Satin Gold Colours

Disks

1” dia. ALM2-334-D1 ALM2-734-D1

1 1/4” dia. ALM2-334-D125 ALM2-734-D125

1 1/2” dia. ALM2-334-D150 ALM2-734-D150

2” dia. ALM2-334-D2 ALM2-734-D2

Ovals5/8” x 1 5/8” ALM2-334-078P ALM2-734-078P

3/4” x 1 7/8” ALM2-334-079P ALM2-734-079P

1” x 2 1/2” ALM2-334-081P ALM2-734-081P

Dog Bone Tags 1 1/16” x 1 5/8” ALM2-334-DB ALM2-734-DB

ALM2-512-DB (Blue)ALM2-602-DB (Red)ALM2-612-DB (Orange)ALM2-704-DB (Yellow)ALM2-932-DB (Green)

Perpetual Plates 1” x 2 1/2” ALM2-334-NT1 ALM2-734-NT1

Notched Plates 7/8” x 2 1/2” ALM2-334-080P ALM2-734-080P

*Call our order desk forother sizes and colours


metal disks & plates

56

CerMark™ may be applied by various methods, including a brush-on technique, spraying, or tape. Mark quality depends on a variety of factors including the substrate used, marking speed, dot size, overlap, material thickness and laser parameters.

Can be removed with plain water.

Apply CerMark™ paste using airbrush or spray gun. Can yield up to 2,000 sq. inch coverage.

Take care to apply an even coat, avoiding brush marks.

CER-000 can be applied by brushing.

CER-CAN yields 1,100 sq. in.

CER-CAN CerMark™ spray can, 12 oz (covers up to 1100 sq. in)CER-CAN-SM Thermark® spray can, 6 oz

CER-NZZ Spare nozzle for spray can

CER-CAN-SMCER-CAN

CER-450-CAN12 oz. can, Black

CerMark™ Glass/Ceramic Marking Compound & Spray

CER-SPR-BTL 6 oz bottle only

Spray Gun (attachment for use with paste)

CER-SPR Spray Gun

• Use as an alternative to using an airbrush.• Offers a convenient, affordable solution for applying CerMark™ mixture.

CER-SPR-RFL Power Unit

Sold separately:

Spray Cans Paste

CER-X-000 1 oz (25 gr)CER-X-050 ½ lb jar (250 gr)

LMM-6038 (Hi-Stick) Metal Marking Compound(used for high polished surfaces)

LMM-6000* MSDS availableMetal Marking Compound LMM-6000

CER-TP1CER TP15CER-TP2

CER-STR6

1” x 50 ft. roll1½” x 50 ft. roll 2” x 50 ft. roll

2” x 6” strips(sold in multiples of 2)

Tape

CER-MSK

CerMark™ Mask

CER-G-250 White LMC-98 CER-G-450-P Black LMC-6044PCER-G-550-P Blue LMC-6013PCER-G-850-P Bronze LMC-6001P

CER-450-P Black LMC-6044PCER-550-P Blue LMC-6013PCER-850-P Bronze LMC-6001PCER-950-P Green LMC-6062P

50 gram ½ lb jar (225 grams)

*samples only

CerMark™ metal marking compound allows for an impervious mark to be made on bare metal with a CO2 laser.

kitCER-KITCerMark™ kit, includes empty bottle & polybrush

CER-000 1 oz (25 gr) CER-010 4 oz (100 gr) CER-050 ½ lb jar (250 gr)

(must be diluted prior to use, instructions included)

Compound Spray

CerMark™ lasers to black, available in 3 application methods: spray, paste, or tape.


CerMark™ Metal/Glass Marking

57

License PlateSSU2-334-LIC

Satin Silver, Stainless5 7/8” x 11 7/8”, .029” thick

Tags

ID-HEX 1” x 1” x 1/16”

ID-HRT 7/8” x 3/4” x 1/16”

ID-OE 1/2” x 13/4” x 1/16”

ID-SRE 1/2” x 2” x 1/16”

GI-SS 3/4” x 11/4” x 1/32”(Includes beaded 18” chain)

GIL-SS 11/8” x 2” x 1/32”(Includes beaded 24” chain)

999-032-D 13/8” x 1/32”

999-032-DB 1” x 15/8” x 1/32”

• Not directly laserable. Must use CerMark™ to mark with CO2 laser • S-hooks, split rings and jump rings are sold separately

Golf Ball Marker

LAS-GLF-D11” dia. x 1/8” thick

Unlacquered Stainless Sheets

SSU1-334 .018”SSU2-334 .029”SSU5-334 .050”

SSU1-344 .018”SSU5-344 .050”

• Thicknesses: .018”, .029”, .050”• Not directly laserable (lasers to black with CerMark™)

SSU22-304 .022”SSU29-304 .029”SSU50-304 .050”SSU62-304 .062”

SSU22-316* .022” SSU29-316* .029”SSU50-316* .050”


Bright SilverType 430



• Thicknesses: .022”, .029”, .050”, .062”• Not directly laserable (lasers to black with CerMark™)*Better corrosive resistance (used in marine applications)

Commercial Plates, .029”

SSU2-334-118H5/32” holes

SSU2-334-D2H5/32” hole

SSU2-334-D15H 5/32” hole

SSU2-334-OVLH 5/32” holes

SSU2-304-D15H1/8” hole

SSU2-304-125H

1/4” round corners

3/16” round corners 1/8” holes

SSU2-334-13 without holesSSU2-334-13H 3/32” holes

1/8” round corners

1” x 3”

3/16” round cornersSSU2-334-150 without holesSSU2-334-150H 3/32” holes

11/2” x 3”

11/8” x 21/2”

11/2” dia.

13/8” x 21/8”

2” dia.

11/4” x 3”

11/4” x 21/8”

SSU2-304-128H

11/2” dia.

Satin Finish, Type 430 steel Tumble Finish, Type 304 steel

Bright and shiny, the stainless steel ball marker is easily spotted on any putting green. A small stud on the bottom keeps the ball marker in place on the green.

999-032-058 Nickel, 5/8"

Tag Accessories

JMP-025 Nickel, 1/4"JMP-038 Nickel, 3/8"

SPL-010 Nickel, 1" dia.Split RingsJump RingsS-Hooks

(Bracelet for ID-OE & ID-SRE,sold separately)

ID-CHN

CHA-0404” beaded chain w/ connectors

Magnetic Non-Magnetic• Sheet size: 12” x 24”


Stainless Steel Products

58

Reverse LaserMark®, 1/16” thick

Rowmark® Identifiers - Badge Frames

t Foils are not recommended for applications, where UV stability is a requirement. n Gloss Finish

922-341942-341*

Matte/Smooth Silvert

LaserMark®, .050” thick

t Foils are not recommended for applications where UV stability is a requirement. n Gloss Finish Metals are not recommended for harsh or high humidity indoor or outdoor applications.

922-602 922-607 922-704 922-932 922-912 922-502 922-512 922-517 922-552 922-228

red/White

Yellow/black

Sapphire/White

blue/White

blue/Yellow

red/Yellow

bright Green/White

PineGreen/White

navy/White

ivory/brown

black/Yellow

Gloss black/

White n

black/White

black/Gold

Gloss black/Gold n

922-407922-422922-402 922-417 922-427

White/red

White/blue

White/black

922-206 922-205 922-204

light Grey/White

Grey/White

922-322 922-312

Cherry/White

english Walnut/

White

Walnut/White

black Walnut/

White

922-152 922-002 922-172 922-192

Port Wine/Gold n

Verde/Gold n

922-937 922-677922-577

Celestialblue/

Gold n

Medium brown/White

Dark brown/White

922-822 922-842

brushed Aluminum/

black t

922-354

brushed Silver/

black t

922-334

Smooth Silver/

black t

922-344

Smooth Gold/

black t

922-714

european Gold/

black t

922-754

brushed Gold/

black t

922-734

922-601

Matte/red

922-621

Matte/burgundy

922-661

Matte/ribbon

Pink

922-701

Matte/Yellow

922-931

Matte/brt. Green

922-511

Matte/blue

922-551

Matte/navy blue

922-201

Matte/White

922-221

Matte/ivory

922-841

Matte/Dark brown

922-401

Matte/black

922-711942-711*

Matte/Smooth Goldt

922-710942-710*

Gloss/Smooth Goldtn

322-101 342-101*

(Ultra-Matte)

Matte/Clear

422-100 442-100*(Slicker)

Gloss/Clear*n

922-340942-340*

Gloss/Smooth

Silvertn

11/8” x 23/16”

13/8” x 23/4”

13/16” x 213/16”

9/16” x 21/2”9/16” x 29/16”

OvalRound Corners

Thin Rectangle

IBF-KIT Display Board

STYLE COLOUR INSERT SIZE INSERT PART NO.

Round Corners

SilverGoldBlack

9/16” x 21/2” 1/16”IBF - 301IBF - 701IBF - 401

RoundCorners

SilverGoldBlack

13/16” x 213/16” 1/16”IBF - 302IBF - 702IBF - 402

RoundCorners

SilverGoldBlack

13/8” x 23/4” 1/16”or 1/8”

IBF - 303IBF - 703IBF - 403

RectangleSquareCorners

SilverGoldBlack

9/16” x 29/16” 1/16”IBF - 3RTIBF - 7RTIBF - 4RT

OvalSilverGoldBlack

11/8” x 23/16” 1/16”IBF - 3OVIBF - 7OVIBF - 4OV

* 1/8” thickness


Rowmark® Plastic

59

LaserMax®, 1/16” thick

* Available in 1/32” and 1/8” thickness n Gloss finish• LaserMax® metals available with NoMark® Plus finish by adding “N” (922LMN-734) 1/16” thickt Metals not recommended for harsh or high humidity indoor or outdoor applications

922LM-972922LM-602 922LM-607 922LM-622 922LM-662 922LM-664922LM-612 922LM-704 922LM-932 922LM-912

922LM-512

Crimson/White*

Claret/White

ribbonPink/White

ribbonPink/black

tangerine/White

Canary/black*

Kelley Green/White

Celadon Green/White

evergreen/White

blue/White*

Crimson/Yellow

China blue/White

922LM-382

ivory/Dark brown

922LM-854

Almond/black

922LM-228

light Grey/burgundy

922LM-326

light Grey/Marine blue

922LM-325

Smoke Grey/White

922LM-312

Celestialblue/Gold n

Port Wine/Gold n

922LM-577 922LM-677

light Grey/black

922LM-324

Med. brown/White

922LM-822

Dark brown/White

922LM-842

brushed Copper/black t

br. Gold/black t

european Gold/

black* t

Smooth Gold/

black t

922LM-754922LM-894 922LM-872922LM-874922LM-734922LM-714

Gloss black/

White n

black/Yellow

black/Gold

Gloss black/Gold n

black/Silver

922LM-422 922LM-407 922LM-417 922LM-427 922LM-413

black/White*

922LM-402

Verde/Gold n

922LM-937

brushed Aluminum/black* t

br. Silver/black t

Smooth Silver/

black t

922LM-354922LM-334922LM-344

922LM-517 922LM-552

blue/Yellow

Patriot blue/White

Purple/White

922LM-582

White/Sky blue

922LM-205

White/black*

922LM-204

White/burgundy

922LM-226

White/bright Green

922LM-209

White/Pine Green

922LM-269

922LM-502922LM-562

Sapphire/White

lightblue/White

White/red

922LM-206

Deep bronze/ black t

922LM-884

FlexiBrass® & FlexiColor®, .020” thick

602-417

n Gloss Finish

602-204 602-402

red/White

602-602

White/black

black/White

Port Wine/brass n

Verde/brass n

Celestial blue/

brass n

Celestial blue/

White n

Port Wine/White n

602-672 602-677 602-937 602-577 602-572 602-744

Yellow/black

602-512

blue/White

brushed Gold/blue

brushed Copper/

black

brushed bronze/

black

brushed bronze/black t

brushed bronze/White t

Deep Bronze/

Black

602-894602-735 602-874 602-884

trophy Gold/

black n

602-394602-794

trophy Silver/

black n

602-734

brushed Gold/black

602-754

european Gold/black

602-334

brushed Silver/black

602-354

brushed Aluminum/

black

Matte black/brass

Gloss black/

brass n

602-427 602-413 602-423

Matte black/ Silver

Gloss black/

Silver n

• Available with or without adhesive• Flexible, lightweight and tough• Combines classic definition of real brass with the advantages of acrylic

LAS-SHT-KIT2 Plastic Sheets Kitkit

Consists of assorted 12” x 24” plastic sheet

stock (13 pcs)

• Long-lasting adhesive protected by a coated liner for easy release.• Can be added to any sheeting, call order desk for details.

3M™ Adhesive Sheets (see pg. 20 for details)


Rowmark® Plastic

60

Ultragrave™ Matte, 1/16” thick

Ultragrave™ Satin, 1/16” thick

922UG-627

Red/White*

red/White

Yellow/black*

Yellow/black

royal blue/White

royal blue/White

White/red

White/red

Glossy black/Gold

922UG-602*

122UG-602

red/black

red/black

AppleGreen/White

AppleGreen/White

royal blue/Gold

White/blue

White/blue

Matte black/Gold

922UG-604

122UG-604

Red/Gold

PineGreen/White

PineGreen/White

navy blue/White

navy blue/White

White/taupe

922UG-637

torrid/White

torrid/White

ForestGreen/White

ForestGreen/White

navy blue/Gold

brown/White

brown/White

922UG-862

122UG-862

exotica/White

exotica/White

ForestGreen/

eggshell

ForestGreen/

eggshell

taupe/White

taupe/White

Chocolatebrown/White

Chocolatebrown/White

burgundy/White

burgundy/White

ForestGreen/

Gold

Almond/black

Almond/black

light Grey/black

burgundy/Gold

turbulent/White

turbulent/White

Craftsman/White

Craftsman/White

black/White*

black/White

922UG-882

122UG-882

922UG-622

122UG-622

Orange/White

Orange/White

blue/White

blue/White

White/black*

White/black

black/Clear*

922UG-612

122UG-612

Orange/black

Orange/black

Air Forceblue/White

Air Forceblue/White

White/Clear*

black/Silver Grey

Black/Silver Grey

922UG-614

122UG-614

922UG-704*

122UG-704

922UG-592

122UG-592

922UG-206

122UG-206

922UG-427

922UG-932*

122UG-932

922UG-597*

922UG-205

122UG-205

922UG-417

922UG-912

122UG-912

922UG-552

122UG-552

922UG-208

922UG-992

122UG-992

922UG-557

922UG-822

122UG-822

922UG-997

922UG-854

122UG-854

922UG-304

922UG-512*

122UG-512

922UG-204*

122UG-204

922UG-401*

922UG-942

122UG-942

922UG-832

122UG-832

922UG-402*

122UG-402

922UG-532

122UG-532

922UG-201

922UG-423

122UG-423

922UG-993

122UG-993

922UG-802

122UG-802

922UG-842

122UG-842

* Available in .020” thickness, change 922 to 602, i.e. 602UG-XXX, replace “XXX” with colour code• High-impact modified acrylic blends

New


Rowmark® Plastic

61

• Ideal as a signage component or substrate • Tactile signage n Gloss Finish

• Ideal as a signage component or substrate

Cashew/ taupe

Cashew/ black

922LM-138

toffee/Ash

toffee/ White

Cinnamon/Ash

Cinnamon/White

Kona/Ash

Kona/White

922LM-134 922LM-122 922LM-112

922LM-022 922LM-222 922LM-082 922LM-012

Contemporary Wood Collection™, 1/16” thick

Cashew/Dark brown

922LM-188

ColorHues™, 1/8” thick

ColorHues™, Frosted Acrylics™, Contemporary Wood Collection™ are ideal for use with stand-offs. See our Clearpath Signage Systems catalogue for more information.

Phantom Cherry blossom

PowderGlacier rain Drop Wedgewood Pacific

Clear n Clear*

341CH-100351CH-100 (1/4”)

341CH-101351CH-101 (1/4”)*Matte 1 side, Gloss 1 side.

ice blue n

341CH-500

Glass Green n

341CH-900341CH-211 341CH-611 341CH-511341CH-521 341CH-531 341CH-541 341CH-551

Caribbean

341CH-921

Citrus

341CH-701

Scarlet

341CH-631

Daffodil

341CH-721

emerald

341CH-991

Passion Fruit

341CH-621

Cobalt

341CH-501

Poppy

341CH-721

StormGrey

341CH-301

Wisteria

341CH-581

bisque

341CH-831

Kiwi

341CH-931

Cocoa

341CH-803

White(Opaque)

341CH-201

black (Opaque)

341CH-401

ColorCast Acrylics™

red blue navy blue AlmondWhiten

Grey

Gold

Silver Clear

burgundy

342C-600352-600

342C-620352-620

342C-850352-850

342C-200352-200

342C-300352-300

342C-710352-710

342C-330352-330

342C-500352-500

342C-550352-550

342C-100352-100

• Add “M” at the and of a code for Matte finish or “G” for Gloss finish• 342C is 1/8” thick • 352 is 1/4” thick

black

342C-400352-400

• ColorHues™ 1” x 2” jump chain samples of each colourROW-HUES


Rowmark® Plastic

62

Textures, 1/16” thick

822-992822-642842-642*

822-622 822-652 822-774 822-778 822-962 822-592842-592*

822-503

822-258 822-854 822-892

822-246 822-244842-244*

822-302822-374

822-422842-422*

822-205

* 1/8” thickness • Textured finish ideal for industrial tags and signage

ADA Alternative®

Marine blue

321-502311-502

Chinablue

321-302311-302

light Grey

321-305311-305

Antique ivory

321-801311-801

Sand

321-808311-808

Ash

321-214311-214

Sandal-wood

321-218311-218

White

321-201311-201

bright White

321-204311-204

Pearl Grey

321-306311-306

Charcoal Grey

321-307311-307

taupe

321-802311-802

Driftwood

321-595311-595

Cinder

321-413311-413

Dark brown

321-803311-803

black

321-401311-401341-401

Gold

321-771311-771

Silver

321-304311-304

Parchment

321-811311-811

beige

321-831311-831

black Forest Green

321-903311-903

Copper

321-891311-891

red

321-601311-601

bordeaux

321-671311-671

burgundy

321-602311-602

PassionPink

321-661311-661

Canyon

321-823311-823

GrassGreen

321-905311-905

Yellow

321-701311-701

teal

321-921311-921

brightGreen

321-901311-901

Mauiblue

321-507311-507

Pine Green

321-902311-902

SilverGrey

321-308311-308

bahama blue

321-509311-509

blue

321-501311-501

Air Force blue

321-504311-504

Matte Clear

322-101311-101

(Ultra-Matte)

Grey

321-301311-301

Graphite

321-398311-398

• Applique: 311 series — 1/32”, 1-ply• Substrate: 321 series — 1/16”, 1-ply • Substrate: 341 series — 1/8”, 1-ply (Special Order)

Pimento/White

bermuda tan/

Dark brown

White/red

ruby/White

Desert Sand/black

Winter White/

blue

tangerine/White

Coffee bean/White

Yellow/black

Ash Grey/black

black/White

Yellow/Dark brown

Ash Grey/White

Jungle Green/White

teal/White

royal blue/White

Sapphire/White

Winter White/black


Rowmark® Plastic

63

302LG-911.020”

311LG-911, 1/32”321LG-911, 1/16”341LG-911, 1/8”

322LG-911.050”

322LG-916.050”, 2-ply

Glow/Safety black

Glow/Safety blue

Glow/Safety

red

322LG-914.050”, 2-ply

322LG-915.050”, 2-ply

br. Stainless/black

922P-314

br. Antique Gold/black

922P-764

bright nickel/black

922P-364

br. Stainless/red

922P-316

br. Stainless/blue

922P-315

br. Antique Gold/red

922P-766922P-765

br. Antique Gold/blue

MetalGraph Plus®, 1/16” thick

Matte/Glow, with Adhesive

Matte/Glow

reverse, Matte/ Glow

Glow/ Safety Green

322LG-919.050”, 2-ply

LaserGlow™ Safety ColoursLaserGlow™

br. Copper/black

922P-864

• Indoor/outdoor suitable • UV stable

• Microsurfaced flexible magnetic material• Brushed metal gloss finish• Ideal for promotional magnets and repositionable nameplates

• Modified impact acrylic for appliqué, tactile signage, front or reverse engraving• Ideal for safety signage, tactile signage, exit signage and industrial tags

LaserLIGHTS® are specially designed for laser engravers. Completely flexible and extremely durable, with excellent exterior properties including resistance to water, solvents, abrasion, and extreme temperatures.

•.004” thickness • 12” x 24” adhesive backed sheets

S26-1224

White/Gold

brushed Silver/ black

S63-1224

brushed bronze/ black t

S69-1224

Smooth Silver/

black n

S73-1224

Smooth Gold/

black tn

S74-1224

brushed brass/

black t

S64-1224

White/black

S62-1224

black/White

S61-1224

black/Gold

S65-1224

black/Silver

S75-1224

t Not recommended for outdoor applications n Gloss Finish

black/Gold n

LMG65-S12*Illustration samples only


• Sheet size: 12” x 24”, .020” thick

t Not recommended for outdoor applications, not UV stable.n Gloss Finish

br. Silver/black

LMG63-S12

br. Gold/black t

LMG64-S12

S68-1224

Yellow/black

UL approval for component products - yellowcard E534751

KEY

ROW-LASSwatch Binder

ROW-CLR-13Colour Chart

Rowmark® Swatch Book & Colour Chart

1-ply1-ply 2-ply


Rowmark® Plastic

®

®

64

Colour Matte Glossbrushed Silver/Clear LZR-991M LZR-991G

brushed Gold/Clear LZR-990M LZR-990G

Colour Matte Glossblack/White LZ-901MK

White/black LZ-902MK

White/red LZ-916MK

White/blue LZ-917MK

red/White LZ-903MK

blue/White LZ-904MK

Yellow/black LZ-906MK

Pine Green/White LZ-914MK

brushed Silver/black* LZ-1100GK

brushed Gold/black* LZ-1000GK

Colour Matte GlossLZ-990M LZ-990*

LZ-990AB

LZ-9408

LZ-9409

LZ-991M LZ-991*

LZ-9412

LZ-992M LZ-992

LZ-993M LZ-993

LZ-994

LZ-9372

LZ-9372BG

LZ-9361

LZ-9361AB

LZ-910

LZ-9362

LZ-9346

LZ-9346GN

LZ-9243

LZ-9243BG

LZ-9406

brushed Gold/black

brushed Gold/blue

brushed Gold/burgundy

brushed Aluminum/black

brushed Aluminum/blue

Smooth Gold/black

Smooth Silver/black

brushed nickel/black

brushed brass/black

brushed Copper/black

brushed Gold/Dark Green

radiant Gold/black

brushed nickel/burgundy

brushed Steel blue/black

brushed Steel blue/blue

brushed Amber/black

brushed Copper/Dark Green

tahitian bronze/black

tahitian bronze/burgundy

Grand Illusion/White

Colour Glossred lazrMirr/Clear LZR-803

Green lazrMirr/Clear LZR-805

blue lazrMirr/Clear LZR-809

Purple lazrMirr/Clear LZR-850

Silver lazrMirr/Clear LZR-898*

Gold lazrMirr/Clear LZR-899

• Sheets size: 12” x 24” * Available in 1/32” by special order, add “12” after part #: LZR-898-12

Reverse LazrMirr, 3/32” thick

Colour Matte Glossblack/bright Gold GCM-2001 GCG-2001

GCM-2003

GCM-2004

GCM-2009

GCM-2014

GCM-2042

GCM-2047

GCM-2050

GCG-2202F

GCG-2204F

GCG-2218

GCM-2082

GCG-2085

red/bright Gold

navy blue/bright Gold

Spruce/bright Gold

teal/bright Gold

Plum/bright Gold

Purple Haze/bright Gold

Verde Green Gold Fleck Marble/br. Gold

blue/bright Gold

Deep Char. Gold Fleck Marble/br. Gold

rustico Granite/bright Gold

Dark Walnut/bright Gold

burlwood/bright Gold

• Also available in 1/32”, add “030” to the part #: GCM-2001-030

Gold Coast, 1/16” thick

Heavy Metal, 1/16” thick

• Smooth Silver & Smooth Gold are UV-stable, for exterior use* Available in 1/8” thickness, add “125” after part #: LZ-990-125

LaserTUFF, 1/16” thick

Reverse Laser Metallic Brush, 1/16” thick

• Interior or exterior usage


IPI® Plastic

65

ColourReveRse

Matte GlossLZR-901 LZR-901G

LZR-902 LZR-902G

LZR-903

LZR-904

LZR-906

LZR-907

LZR-909

LZR-930

LZR-931

LZR-933

LZR-936

LZR-937

LZR-940

LZR-942

LZR-945

LZR-947

LZR-971

LZR-992RM LZR-992RG

LZR-993RM LZR-993RG

LCM-700G

LZR-990M LZR-990G

LZR-991M LZR-991G

Colour1/16” .050”

MatteMatte GlossLZ-901 LZ-2901-72

LZ-902 LZ-2902-72

LZ-916 LZ-2916-72

LZ-917 LZ-2917-72

LZ-919

LZ-903 LZ-2903-72

LZ-904 LZ-2904-72

LZ-905

LZ-906 LZ-2906-72

LZ-907

LZ-909

LZ-912

LZ-914 LZ-2914-72

LZ-930

LZ-933

LZ-942

LZ-947

LZ-950

LZ-981

LZ-9200M LZ-9200

LZ-9202M LZ-9202

LZ-9202F

LZ-9204M LZ-9204

LZ-9204F

LZ-9213M LZ-9213

LZ-9216M LZ-9216

LZ-9218M LZ-9218

black/White

red/White

blue/White

Green/White

Yellow/black

brown/White

navy blue/White

burgundy/White

Pine Green/White

Pumice/black

Gray Flannel/White

teal/White

Plum/White

Purple Haze/White

Medium Walnut/White

Platinum Marble/black

Deep Charcoal Marble/White

Deep Charcoal Marble (Gloss)/White

Verde Green Marble/White

Verde Green Marble (Gloss)/White

Wild Cranberry Marble/White

Shaded Spruce Granite/White

rustico Granite/White

Colour MatteMatte/black LZR-901-12

Matte/White LZR-902-12

Matte Clear/Gloss Clear LCM-700G-12

White/Clear

blue/Clear

Yellow/Clear

Dark brown/Clear

navy blue/Clear

Pumice/Clear

Gray Flannel/Clear

teal/Clear

Plum/Clear

red/Clear

Pewter/Clear

Wedgewood/Clear

Slate/Clear

Jade/Clear

Dusty Mauve/Clear

Apricot/Clear

Smooth Gold/Clear

Smooth Silver/Clear

Matte Clear/Gloss Clear

Brushed Gold/Clear

brushed Silver/Clear

black/Clear

Reverse Laser Thins, 1/32” thick

IPI Swatch Binder

Colour Matte Gloss

LZ-901-12

LZ-902-12

LZ-903-12

LZ-904-12

LZ-909-12

LZ-914-12

LZ-990-12

LZ-991-12

LZ-998-12

LZ-999-12

LZ-9346-12

LZ-9372-12

black/White

White/black

brushed Gold/black*

brushed Aluminum/black*

Mirror Silver/black*

Mirror Gold/black*

brushed Copper/black*

blue/White

navy blue/White

red/White

Pine Green/White

brushed nickel/black*

* Metallic products are not recommended for exterior use

Laser Thins, 1/32” thick

Laserables I, 1/16” thick & Laserables II, .050” thick Laserables Reverse, 1/16” thick

White/red

White/blue

White/Green

White/black

IPI-000IPI Swatch Binder

• Features engraved samples from each product line


IPI® Plastic

66

LaserMark® KIT-9038-LM LaserMax® KIT-9034-LMXReverse LaserMark® KIT-9035-LMR

LaserGlow™ KIT-9054-GLO

Textures® KIT-9033-TEX Metalgraph Plus™ KIT-9052-MTL

LASERmag® KIT-9037-LMGFlexiBrass/Color® KIT-9030-FLX LaserLIGHTS® KIT-9036-LLT

Rowmark® Pre-made Sign Kits

ADA Alternative® KIT-9022-ADA

ColorCast Acrylics™ KIT-9046-CC Contemporary Wood Collection® KIT-9056-WDSColorHues™ KIT-9076-HUE

CO2 Laser Safety Goggles ULS-CO2-SAFE

Laser Protective Eyewear for UV/CO2, large fit-over style, clear poly filter OD 6+ @ 200-360, 5+ 10600nm VLT @ 90% offers protection against accidental exposure to laser.

• Complies with ISO requirements.• Comes with cleaning cloth and case.

ULS-851-0002-0Cotton Swabs• Wooden shaft• 6” long• 100 pcs/pack

Lens Cleaning Supplies

ULS-851-0001-0Precision Optical Lens Tissue• For fine optics• 50 pcs/pack

ULS-850-0001-0Industrial Optical Lens Cleaner• 13/4 fl oz• Loosens all film and hard to remove optical contaminants.

CANADIAN ENGRAVERS SUPPLY CO. LTD.385 Admiral blvd., Unit #2, Mississauga, On l5t 2M8

tel: 905-795-1262 • 877-795-1262 Fax: 905-795-0219 • 800-632-3726

email: [email protected]

Copyright © 2014 Canadian engravers Supply$5

CANADIAN ENGRAVERS SUPPLY ALBERTA LTD.4730 14th St. n.e. Calgary, Ab t2e 6l7tel: 403-250-6774 • 877-775-6774 Fax: 403-250-7718 email: [email protected]

www.cesco.ca . www.laserstuff.ca CeSCO lAS CAt 2014

products - Canadian Engravers

Documents

Transcript of products - Canadian Engravers